staging: comedi: adl_pci9118: tidy up the ai status register bit defines

Rename the CamelCase defines used for the analog input status register
bits and convert them to bit shifts.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/comedi/drivers/adl_pci9118.c b/drivers/staging/comedi/drivers/adl_pci9118.c
index 484518c99906045fee6da0afc13ac3846b8bfed0..350df462fca61142ad2478070d2b0a4e50bb0d90 100644 (file)
--- a/drivers/staging/comedi/drivers/adl_pci9118.c
+++ b/drivers/staging/comedi/drivers/adl_pci9118.c
@@ -111,6 +111,15 @@
 #define PCI9118_AI_FIFO_REG            0x10
 #define PCI9118_AO_REG(x)              (0x10 + ((x) * 4))
 #define PCI9118_AI_STATUS_REG          0x18
+#define PCI9118_AI_STATUS_NFULL                (1 << 8)  /* 0=FIFO full (fatal) */
+#define PCI9118_AI_STATUS_NHFULL       (1 << 7)  /* 0=FIFO half full */
+#define PCI9118_AI_STATUS_NEPTY                (1 << 6)  /* 0=FIFO empty */
+#define PCI9118_AI_STATUS_ACMP         (1 << 5)  /* 1=about trigger complete */
+#define PCI9118_AI_STATUS_DTH          (1 << 4)  /* 1=ext. digital trigger */
+#define PCI9118_AI_STATUS_BOVER                (1 << 3)  /* 1=burst overrun (fatal) */
+#define PCI9118_AI_STATUS_ADOS         (1 << 2)  /* 1=A/D over speed (warn) */
+#define PCI9118_AI_STATUS_ADOR         (1 << 1)  /* 1=A/D overrun (fatal) */
+#define PCI9118_AI_STATUS_ADRDY                (1 << 0)  /* 1=A/D ready */
 
 #define PCI9118_ADCNTRL        0x18    /* W:   A/D control register */
 #define PCI9118_DI     0x1c    /* R:   digi input register */
@@ -171,17 +180,6 @@
                                         */
 #define AdFunction_Start       0x01    /* 1=trigger start, 0=trigger stop */
 
-/* bits from A/D status register (PCI9118_AI_STATUS_REG) */
-#define AdStatus_nFull 0x100   /* 0=FIFO full (fatal), 1=not full */
-#define AdStatus_nHfull        0x080   /* 0=FIFO half full, 1=FIFO not half full */
-#define AdStatus_nEpty 0x040   /* 0=FIFO empty, 1=FIFO not empty */
-#define AdStatus_Acmp  0x020   /*  */
-#define AdStatus_DTH   0x010   /* 1=external digital trigger */
-#define AdStatus_Bover 0x008   /* 1=burst mode overrun (fatal) */
-#define AdStatus_ADOS  0x004   /* 1=A/D over speed (warning) */
-#define AdStatus_ADOR  0x002   /* 1=A/D overrun (fatal) */
-#define AdStatus_ADrdy 0x001   /* 1=A/D already ready, 0=not ready */
-
 /* bits for interrupt reason and control (PCI9118_INTSRC, PCI9118_INTCTRL) */
 /* 1=interrupt occur, enable source,  0=interrupt not occur, disable source */
 #define Int_Timer      0x08    /* timer interrupt */
@@ -501,7 +499,7 @@ static int pci9118_ai_eoc(struct comedi_device *dev,
        unsigned int status;
 
        status = inl(dev->iobase + PCI9118_AI_STATUS_REG);
-       if (status & AdStatus_ADrdy)
+       if (status & PCI9118_AI_STATUS_ADRDY)
                return 0;
        return -EBUSY;
 }
@@ -1009,7 +1007,7 @@ static irqreturn_t pci9118_interrupt(int irq, void *d)
                return IRQ_HANDLED;
 
        if (devpriv->ai12_startstop) {
-               if ((adstat & AdStatus_DTH) && (intsrc & Int_DTrg)) {
+               if ((adstat & PCI9118_AI_STATUS_DTH) && (intsrc & Int_DTrg)) {
                        /* start/stop of measure */
                        if (devpriv->ai12_startstop & START_AI_EXT) {
                                /* deactivate EXT trigger */