]> git.karo-electronics.de Git - linux-beck.git/commitdiff
isci: merge remote_device substates into a single state machine
authorDan Williams <dan.j.williams@intel.com>
Wed, 27 Apr 2011 23:32:45 +0000 (16:32 -0700)
committerDan Williams <dan.j.williams@intel.com>
Sun, 3 Jul 2011 11:00:39 +0000 (04:00 -0700)
A substate is just a state, so uplevel the smp and stp device substates.
Three tricks at work here:

1/ scic_sds_remote_device_ready_state_enter: needs to know the the device type
   so it can immediately transition to a stp or smp ready substate.

2/ scic_sds_remote_device_ready_state_exit: needs to know the device type. In
   the ssp case the device is no longer ready, in the stp, and smp case we have
   simply exited to a ready "substate".

3/ scic_sds_remote_device_resume_complete_handler: The one location
   where we directly check the current state against
   SCI_BASE_REMOTE_DEVICE_STATE_READY needed to comprehend the possible ready
   substates.

Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
drivers/scsi/isci/Makefile
drivers/scsi/isci/remote_device.c
drivers/scsi/isci/remote_device.h
drivers/scsi/isci/smp_remote_device.c [deleted file]
drivers/scsi/isci/stp_remote_device.c [deleted file]

index fc50ba34b13d3dfdea17a43a6b0c1977bc840351..c27d2599912369d1ae06b8e4b185b85f141de0c2 100644 (file)
@@ -7,8 +7,6 @@ obj-$(CONFIG_SCSI_ISCI) += isci.o
 isci-objs := init.o phy.o request.o sata.o \
             remote_device.o port.o timers.o \
             host.o task.o probe_roms.o \
-            stp_remote_device.o \
-            smp_remote_device.o \
             remote_node_context.o \
             remote_node_table.o \
             core/scic_sds_controller.o  \
index 2bbc7c20c4009a5ff7d7415e98d7cf59da0085f2..f6da85e3f2af994a91a88020dc2b1165af6f3436 100644 (file)
@@ -53,6 +53,7 @@
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 #include "intel_sas.h"
+#include "intel_ata.h"
 #include "isci.h"
 #include "port.h"
 #include "remote_device.h"
 #include "scu_event_codes.h"
 #include "task.h"
 
+/**
+ * isci_remote_device_change_state() - This function gets the status of the
+ *    remote_device object.
+ * @isci_device: This parameter points to the isci_remote_device object
+ *
+ * status of the object as a isci_status enum.
+ */
+void isci_remote_device_change_state(
+       struct isci_remote_device *isci_device,
+       enum isci_status status)
+{
+       unsigned long flags;
+
+       spin_lock_irqsave(&isci_device->state_lock, flags);
+       isci_device->status = status;
+       spin_unlock_irqrestore(&isci_device->state_lock, flags);
+}
+
+/**
+ * isci_remote_device_not_ready() - This function is called by the scic when
+ *    the remote device is not ready. We mark the isci device as ready (not
+ *    "ready_for_io") and signal the waiting proccess.
+ * @isci_host: This parameter specifies the isci host object.
+ * @isci_device: This parameter specifies the remote device
+ *
+ */
+static void isci_remote_device_not_ready(struct isci_host *ihost,
+                                 struct isci_remote_device *idev, u32 reason)
+{
+       dev_dbg(&ihost->pdev->dev,
+               "%s: isci_device = %p\n", __func__, idev);
+
+       if (reason == SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED)
+               isci_remote_device_change_state(idev, isci_stopping);
+       else
+               /* device ready is actually a "not ready for io" state. */
+               isci_remote_device_change_state(idev, isci_ready);
+}
+
+/**
+ * isci_remote_device_ready() - This function is called by the scic when the
+ *    remote device is ready. We mark the isci device as ready and signal the
+ *    waiting proccess.
+ * @ihost: our valid isci_host
+ * @idev: remote device
+ *
+ */
+static void isci_remote_device_ready(struct isci_host *ihost, struct isci_remote_device *idev)
+{
+       dev_dbg(&ihost->pdev->dev,
+               "%s: idev = %p\n", __func__, idev);
+
+       isci_remote_device_change_state(idev, isci_ready_for_io);
+       if (test_and_clear_bit(IDEV_START_PENDING, &idev->flags))
+               wake_up(&ihost->eventq);
+}
+
+
+
 enum sci_status scic_remote_device_stop(
        struct scic_sds_remote_device *sci_dev,
        u32 timeout)
@@ -228,49 +288,43 @@ void scic_sds_remote_device_post_request(
                );
 }
 
-/**
- *
- * @user_parameter: This is cast to a remote device object.
- *
- * This method is called once the remote node context is ready to be freed.
+/* called once the remote node context is ready to be freed.
  * The remote device can now report that its stop operation is complete. none
  */
-static void scic_sds_cb_remote_device_rnc_destruct_complete(
-       void *user_parameter)
+static void scic_sds_cb_remote_device_rnc_destruct_complete(void *_dev)
 {
-       struct scic_sds_remote_device *sci_dev;
-
-       sci_dev = (struct scic_sds_remote_device *)user_parameter;
+       struct scic_sds_remote_device *sci_dev = _dev;
 
        BUG_ON(sci_dev->started_request_count != 0);
-
        sci_base_state_machine_change_state(&sci_dev->state_machine,
                                            SCI_BASE_REMOTE_DEVICE_STATE_STOPPED);
 }
 
-/**
- *
- * @user_parameter: This is cast to a remote device object.
- *
- * This method is called once the remote node context has transisitioned to a
+/* called once the remote node context has transisitioned to a
  * ready state.  This is the indication that the remote device object can also
- * transition to ready. none
+ * transition to ready.
  */
-static void scic_sds_remote_device_resume_complete_handler(
-       void *user_parameter)
-{
-       struct scic_sds_remote_device *sci_dev;
-
-       sci_dev = (struct scic_sds_remote_device *)user_parameter;
-
-       if (
-               sci_base_state_machine_get_state(&sci_dev->state_machine)
-               != SCI_BASE_REMOTE_DEVICE_STATE_READY
-               ) {
-               sci_base_state_machine_change_state(
-                       &sci_dev->state_machine,
-                       SCI_BASE_REMOTE_DEVICE_STATE_READY
-                       );
+static void scic_sds_remote_device_resume_complete_handler(void *_dev)
+{
+       struct scic_sds_remote_device *sci_dev = _dev;
+       enum scic_sds_remote_device_states state;
+
+       state = sci_dev->state_machine.current_state_id;
+       switch (state) {
+       case SCI_BASE_REMOTE_DEVICE_STATE_READY:
+       case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE:
+       case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD:
+       case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ:
+       case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR:
+       case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET:
+       case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE:
+       case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD:
+               break;
+       default:
+               /* go 'ready' if we are not already in a ready state */
+               sci_base_state_machine_change_state(&sci_dev->state_machine,
+                                                   SCI_BASE_REMOTE_DEVICE_STATE_READY);
+               break;
        }
 }
 
@@ -284,7 +338,7 @@ static void scic_sds_remote_device_resume_complete_handler(
  * This method will perform the STP request start processing common to IO
  * requests and task requests of all types. none
  */
-void scic_sds_remote_device_start_request(
+static void scic_sds_remote_device_start_request(
        struct scic_sds_remote_device *sci_dev,
        struct scic_sds_request *sci_req,
        enum sci_status status)
@@ -308,7 +362,7 @@ void scic_sds_remote_device_start_request(
  * serves as a callback when RNC gets resumed during a task management
  * sequence. none
  */
-void scic_sds_remote_device_continue_request(void *dev)
+static void scic_sds_remote_device_continue_request(void *dev)
 {
        struct scic_sds_remote_device *sci_dev = dev;
 
@@ -368,7 +422,7 @@ default_device_handler(struct scic_sds_remote_device *sci_dev,
        return SCI_FAILURE_INVALID_STATE;
 }
 
-enum sci_status scic_sds_remote_device_default_start_handler(
+static enum sci_status scic_sds_remote_device_default_start_handler(
        struct scic_sds_remote_device *sci_dev)
 {
        return default_device_handler(sci_dev, __func__);
@@ -380,37 +434,37 @@ static enum sci_status scic_sds_remote_device_default_stop_handler(
        return default_device_handler(sci_dev, __func__);
 }
 
-enum sci_status scic_sds_remote_device_default_fail_handler(
+static enum sci_status scic_sds_remote_device_default_fail_handler(
        struct scic_sds_remote_device *sci_dev)
 {
        return default_device_handler(sci_dev, __func__);
 }
 
-enum sci_status scic_sds_remote_device_default_destruct_handler(
+static enum sci_status scic_sds_remote_device_default_destruct_handler(
        struct scic_sds_remote_device *sci_dev)
 {
        return default_device_handler(sci_dev, __func__);
 }
 
-enum sci_status scic_sds_remote_device_default_reset_handler(
+static enum sci_status scic_sds_remote_device_default_reset_handler(
        struct scic_sds_remote_device *sci_dev)
 {
        return default_device_handler(sci_dev, __func__);
 }
 
-enum sci_status scic_sds_remote_device_default_reset_complete_handler(
+static enum sci_status scic_sds_remote_device_default_reset_complete_handler(
        struct scic_sds_remote_device *sci_dev)
 {
        return default_device_handler(sci_dev, __func__);
 }
 
-enum sci_status scic_sds_remote_device_default_suspend_handler(
+static enum sci_status scic_sds_remote_device_default_suspend_handler(
        struct scic_sds_remote_device *sci_dev, u32 suspend_type)
 {
        return default_device_handler(sci_dev, __func__);
 }
 
-enum sci_status scic_sds_remote_device_default_resume_handler(
+static enum sci_status scic_sds_remote_device_default_resume_handler(
        struct scic_sds_remote_device *sci_dev)
 {
        return default_device_handler(sci_dev, __func__);
@@ -505,7 +559,7 @@ static enum sci_status  scic_sds_remote_device_default_event_handler(
  * releases the frame and returns a failure. enum sci_status
  * SCI_FAILURE_INVALID_STATE
  */
-enum sci_status scic_sds_remote_device_default_frame_handler(
+static enum sci_status scic_sds_remote_device_default_frame_handler(
        struct scic_sds_remote_device *sci_dev,
        u32 frame_index)
 {
@@ -525,21 +579,21 @@ enum sci_status scic_sds_remote_device_default_frame_handler(
        return SCI_FAILURE_INVALID_STATE;
 }
 
-enum sci_status scic_sds_remote_device_default_start_request_handler(
+static enum sci_status scic_sds_remote_device_default_start_request_handler(
        struct scic_sds_remote_device *sci_dev,
        struct scic_sds_request *request)
 {
        return default_device_handler(sci_dev, __func__);
 }
 
-enum sci_status scic_sds_remote_device_default_complete_request_handler(
+static enum sci_status scic_sds_remote_device_default_complete_request_handler(
        struct scic_sds_remote_device *sci_dev,
        struct scic_sds_request *request)
 {
        return default_device_handler(sci_dev, __func__);
 }
 
-enum sci_status scic_sds_remote_device_default_continue_request_handler(
+static enum sci_status scic_sds_remote_device_default_continue_request_handler(
        struct scic_sds_remote_device *sci_dev,
        struct scic_sds_request *request)
 {
@@ -558,7 +612,7 @@ enum sci_status scic_sds_remote_device_default_continue_request_handler(
  * This method decodes the tag for the io request object and routes the
  * unsolicited frame to that object. enum sci_status SCI_FAILURE_INVALID_STATE
  */
-enum sci_status scic_sds_remote_device_general_frame_handler(
+static enum sci_status scic_sds_remote_device_general_frame_handler(
        struct scic_sds_remote_device *sci_dev,
        u32 frame_index)
 {
@@ -602,7 +656,7 @@ enum sci_status scic_sds_remote_device_general_frame_handler(
  * This is a common method for handling events reported to the remote device
  * from the controller object. enum sci_status
  */
-enum sci_status scic_sds_remote_device_general_event_handler(
+static enum sci_status scic_sds_remote_device_general_event_handler(
        struct scic_sds_remote_device *sci_dev,
        u32 event_code)
 {
@@ -705,7 +759,7 @@ static enum sci_status scic_sds_remote_device_starting_state_stop_handler(
        return SCI_SUCCESS;
 }
 
-enum sci_status scic_sds_remote_device_ready_state_stop_handler(
+static enum sci_status scic_sds_remote_device_ready_state_stop_handler(
        struct scic_sds_remote_device *sci_dev)
 {
        enum sci_status status = SCI_SUCCESS;
@@ -731,7 +785,7 @@ enum sci_status scic_sds_remote_device_ready_state_stop_handler(
  *
  * This is the ready state device reset handler enum sci_status
  */
-enum sci_status scic_sds_remote_device_ready_state_reset_handler(
+static enum sci_status scic_sds_remote_device_ready_state_reset_handler(
        struct scic_sds_remote_device *sci_dev)
 {
        /* Request the parent state machine to transition to the stopping state */
@@ -893,34 +947,15 @@ static enum sci_status scic_sds_remote_device_stopping_state_complete_request_ha
        return SCI_SUCCESS;
 }
 
-/**
- *
- * @device: The struct scic_sds_remote_device which is to be cast into a
- *    struct scic_sds_remote_device object.
- *
- * This method will complete the reset operation when the device is in the
- * resetting state. enum sci_status
- */
 static enum sci_status scic_sds_remote_device_resetting_state_reset_complete_handler(
        struct scic_sds_remote_device *sci_dev)
 {
-
-       sci_base_state_machine_change_state(
-               &sci_dev->state_machine,
-               SCI_BASE_REMOTE_DEVICE_STATE_READY
-               );
+       sci_base_state_machine_change_state(&sci_dev->state_machine,
+                                           SCI_BASE_REMOTE_DEVICE_STATE_READY);
 
        return SCI_SUCCESS;
 }
 
-/**
- *
- * @device: The struct scic_sds_remote_device which is to be cast into a
- *    struct scic_sds_remote_device object.
- *
- * This method will stop the remote device while in the resetting state.
- * enum sci_status
- */
 static enum sci_status scic_sds_remote_device_resetting_state_stop_handler(
        struct scic_sds_remote_device *sci_dev)
 {
@@ -932,12 +967,11 @@ static enum sci_status scic_sds_remote_device_resetting_state_stop_handler(
        return SCI_SUCCESS;
 }
 
-/*
- * This method completes requests for this struct scic_sds_remote_device while it is
- * in the SCI_BASE_REMOTE_DEVICE_STATE_RESETTING state. This method calls the
- * complete method for the request object and if that is successful the port
- * object is called to complete the task request. Then the device object itself
- * completes the task request. enum sci_status
+/* complete requests for this device while it is in the
+ * SCI_BASE_REMOTE_DEVICE_STATE_RESETTING state. This method calls the complete
+ * method for the request object and if that is successful the port object is
+ * called to complete the task request. Then the device object itself completes
+ * the task request. enum sci_status
  */
 static enum sci_status scic_sds_remote_device_resetting_state_complete_request_handler(
        struct scic_sds_remote_device *sci_dev,
@@ -960,173 +994,665 @@ static enum sci_status scic_sds_remote_device_resetting_state_complete_request_h
        return status;
 }
 
-static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_state_handler_table[] = {
-       [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = {
-               .start_handler          = scic_sds_remote_device_default_start_handler,
-               .stop_handler           = scic_sds_remote_device_default_stop_handler,
-               .fail_handler           = scic_sds_remote_device_default_fail_handler,
-               .destruct_handler       = scic_sds_remote_device_default_destruct_handler,
-               .reset_handler          = scic_sds_remote_device_default_reset_handler,
-               .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
-               .start_io_handler       = scic_sds_remote_device_default_start_request_handler,
-               .complete_io_handler    = scic_sds_remote_device_default_complete_request_handler,
-               .continue_io_handler    = scic_sds_remote_device_default_continue_request_handler,
-               .start_task_handler     = scic_sds_remote_device_default_start_request_handler,
-               .complete_task_handler  = scic_sds_remote_device_default_complete_request_handler,
-               .suspend_handler        = scic_sds_remote_device_default_suspend_handler,
-               .resume_handler         = scic_sds_remote_device_default_resume_handler,
-               .event_handler          = scic_sds_remote_device_default_event_handler,
-               .frame_handler          = scic_sds_remote_device_default_frame_handler
-       },
-       [SCI_BASE_REMOTE_DEVICE_STATE_STOPPED] = {
-               .start_handler          = scic_sds_remote_device_stopped_state_start_handler,
-               .stop_handler           = scic_sds_remote_device_stopped_state_stop_handler,
-               .fail_handler           = scic_sds_remote_device_default_fail_handler,
-               .destruct_handler       = scic_sds_remote_device_stopped_state_destruct_handler,
-               .reset_handler          = scic_sds_remote_device_default_reset_handler,
-               .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
-               .start_io_handler       = scic_sds_remote_device_default_start_request_handler,
-               .complete_io_handler    = scic_sds_remote_device_default_complete_request_handler,
-               .continue_io_handler    = scic_sds_remote_device_default_continue_request_handler,
-               .start_task_handler     = scic_sds_remote_device_default_start_request_handler,
-               .complete_task_handler  = scic_sds_remote_device_default_complete_request_handler,
-               .suspend_handler        = scic_sds_remote_device_default_suspend_handler,
-               .resume_handler         = scic_sds_remote_device_default_resume_handler,
-               .event_handler          = scic_sds_remote_device_default_event_handler,
-               .frame_handler          = scic_sds_remote_device_default_frame_handler
-       },
-       [SCI_BASE_REMOTE_DEVICE_STATE_STARTING] = {
-               .start_handler          = scic_sds_remote_device_default_start_handler,
-               .stop_handler           = scic_sds_remote_device_starting_state_stop_handler,
-               .fail_handler           = scic_sds_remote_device_default_fail_handler,
-               .destruct_handler       = scic_sds_remote_device_default_destruct_handler,
-               .reset_handler          = scic_sds_remote_device_default_reset_handler,
-               .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
-               .start_io_handler       = scic_sds_remote_device_default_start_request_handler,
-               .complete_io_handler    = scic_sds_remote_device_default_complete_request_handler,
-               .continue_io_handler    = scic_sds_remote_device_default_continue_request_handler,
-               .start_task_handler     = scic_sds_remote_device_default_start_request_handler,
-               .complete_task_handler  = scic_sds_remote_device_default_complete_request_handler,
-               .suspend_handler        = scic_sds_remote_device_default_suspend_handler,
-               .resume_handler         = scic_sds_remote_device_default_resume_handler,
-               .event_handler          = scic_sds_remote_device_general_event_handler,
-               .frame_handler          = scic_sds_remote_device_default_frame_handler
-       },
-       [SCI_BASE_REMOTE_DEVICE_STATE_READY] = {
-               .start_handler          = scic_sds_remote_device_default_start_handler,
-               .stop_handler           = scic_sds_remote_device_ready_state_stop_handler,
-               .fail_handler           = scic_sds_remote_device_default_fail_handler,
-               .destruct_handler       = scic_sds_remote_device_default_destruct_handler,
-               .reset_handler          = scic_sds_remote_device_ready_state_reset_handler,
-               .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
-               .start_io_handler       = scic_sds_remote_device_ready_state_start_io_handler,
-               .complete_io_handler    = scic_sds_remote_device_ready_state_complete_request_handler,
-               .continue_io_handler    = scic_sds_remote_device_default_continue_request_handler,
-               .start_task_handler     = scic_sds_remote_device_ready_state_start_task_handler,
-               .complete_task_handler  = scic_sds_remote_device_ready_state_complete_request_handler,
-               .suspend_handler        = scic_sds_remote_device_default_suspend_handler,
-               .resume_handler         = scic_sds_remote_device_default_resume_handler,
-               .event_handler          = scic_sds_remote_device_general_event_handler,
-               .frame_handler          = scic_sds_remote_device_general_frame_handler,
-       },
-       [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = {
-               .start_handler          = scic_sds_remote_device_default_start_handler,
-               .stop_handler           = scic_sds_remote_device_stopping_state_stop_handler,
-               .fail_handler           = scic_sds_remote_device_default_fail_handler,
-               .destruct_handler       = scic_sds_remote_device_default_destruct_handler,
-               .reset_handler          = scic_sds_remote_device_default_reset_handler,
-               .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
-               .start_io_handler       = scic_sds_remote_device_default_start_request_handler,
-               .complete_io_handler    = scic_sds_remote_device_stopping_state_complete_request_handler,
-               .continue_io_handler    = scic_sds_remote_device_default_continue_request_handler,
-               .start_task_handler     = scic_sds_remote_device_default_start_request_handler,
-               .complete_task_handler  = scic_sds_remote_device_stopping_state_complete_request_handler,
-               .suspend_handler        = scic_sds_remote_device_default_suspend_handler,
-               .resume_handler         = scic_sds_remote_device_default_resume_handler,
-               .event_handler          = scic_sds_remote_device_general_event_handler,
-               .frame_handler          = scic_sds_remote_device_general_frame_handler
-       },
-       [SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = {
-               .start_handler          = scic_sds_remote_device_default_start_handler,
-               .stop_handler           = scic_sds_remote_device_default_stop_handler,
-               .fail_handler           = scic_sds_remote_device_default_fail_handler,
-               .destruct_handler       = scic_sds_remote_device_default_destruct_handler,
-               .reset_handler          = scic_sds_remote_device_default_reset_handler,
-               .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
-               .start_io_handler       = scic_sds_remote_device_default_start_request_handler,
-               .complete_io_handler    = scic_sds_remote_device_default_complete_request_handler,
-               .continue_io_handler    = scic_sds_remote_device_default_continue_request_handler,
-               .start_task_handler     = scic_sds_remote_device_default_start_request_handler,
-               .complete_task_handler  = scic_sds_remote_device_default_complete_request_handler,
-               .suspend_handler        = scic_sds_remote_device_default_suspend_handler,
-               .resume_handler         = scic_sds_remote_device_default_resume_handler,
-               .event_handler          = scic_sds_remote_device_default_event_handler,
-               .frame_handler          = scic_sds_remote_device_general_frame_handler
-       },
-       [SCI_BASE_REMOTE_DEVICE_STATE_RESETTING] = {
-               .start_handler          = scic_sds_remote_device_default_start_handler,
-               .stop_handler           = scic_sds_remote_device_resetting_state_stop_handler,
-               .fail_handler           = scic_sds_remote_device_default_fail_handler,
-               .destruct_handler       = scic_sds_remote_device_default_destruct_handler,
-               .reset_handler          = scic_sds_remote_device_default_reset_handler,
-               .reset_complete_handler = scic_sds_remote_device_resetting_state_reset_complete_handler,
-               .start_io_handler       = scic_sds_remote_device_default_start_request_handler,
-               .complete_io_handler    = scic_sds_remote_device_resetting_state_complete_request_handler,
-               .continue_io_handler    = scic_sds_remote_device_default_continue_request_handler,
-               .start_task_handler     = scic_sds_remote_device_default_start_request_handler,
-               .complete_task_handler  = scic_sds_remote_device_resetting_state_complete_request_handler,
-               .suspend_handler        = scic_sds_remote_device_default_suspend_handler,
-               .resume_handler         = scic_sds_remote_device_default_resume_handler,
-               .event_handler          = scic_sds_remote_device_default_event_handler,
-               .frame_handler          = scic_sds_remote_device_general_frame_handler
-       },
-       [SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = {
-               .start_handler          = scic_sds_remote_device_default_start_handler,
-               .stop_handler           = scic_sds_remote_device_default_stop_handler,
-               .fail_handler           = scic_sds_remote_device_default_fail_handler,
-               .destruct_handler       = scic_sds_remote_device_default_destruct_handler,
-               .reset_handler          = scic_sds_remote_device_default_reset_handler,
-               .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
-               .start_io_handler       = scic_sds_remote_device_default_start_request_handler,
-               .complete_io_handler    = scic_sds_remote_device_default_complete_request_handler,
-               .continue_io_handler    = scic_sds_remote_device_default_continue_request_handler,
-               .start_task_handler     = scic_sds_remote_device_default_start_request_handler,
-               .complete_task_handler  = scic_sds_remote_device_default_complete_request_handler,
-               .suspend_handler        = scic_sds_remote_device_default_suspend_handler,
-               .resume_handler         = scic_sds_remote_device_default_resume_handler,
-               .event_handler          = scic_sds_remote_device_default_event_handler,
-               .frame_handler          = scic_sds_remote_device_default_frame_handler
-       }
-};
-
-static void scic_sds_remote_device_initial_state_enter(void *object)
+static enum sci_status scic_sds_stp_remote_device_complete_request(struct scic_sds_remote_device *sci_dev,
+                                                                  struct scic_sds_request *sci_req)
 {
-       struct scic_sds_remote_device *sci_dev = object;
+       enum sci_status status;
 
-       SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table,
-                         SCI_BASE_REMOTE_DEVICE_STATE_INITIAL);
+       status = scic_sds_io_request_complete(sci_req);
+       if (status != SCI_SUCCESS)
+               goto out;
 
-       /* Initial state is a transitional state to the stopped state */
-       sci_base_state_machine_change_state(&sci_dev->state_machine,
-                                           SCI_BASE_REMOTE_DEVICE_STATE_STOPPED);
+       status = scic_sds_port_complete_io(sci_dev->owning_port, sci_dev, sci_req);
+       if (status != SCI_SUCCESS)
+               goto out;
+
+       scic_sds_remote_device_decrement_request_count(sci_dev);
+       if (sci_req->sci_status == SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) {
+               /* This request causes hardware error, device needs to be Lun Reset.
+                * So here we force the state machine to IDLE state so the rest IOs
+                * can reach RNC state handler, these IOs will be completed by RNC with
+                * status of "DEVICE_RESET_REQUIRED", instead of "INVALID STATE".
+                */
+               sci_base_state_machine_change_state(&sci_dev->state_machine,
+                                                   SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET);
+       } else if (scic_sds_remote_device_get_request_count(sci_dev) == 0)
+               sci_base_state_machine_change_state(&sci_dev->state_machine,
+                                                   SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE);
+
+
+ out:
+       if (status != SCI_SUCCESS)
+               dev_err(scirdev_to_dev(sci_dev),
+                       "%s: Port:0x%p Device:0x%p Request:0x%p Status:0x%x "
+                       "could not complete\n", __func__, sci_dev->owning_port,
+                       sci_dev, sci_req, status);
+
+       return status;
 }
 
-/**
- * isci_remote_device_change_state() - This function gets the status of the
- *    remote_device object.
- * @isci_device: This parameter points to the isci_remote_device object
+/* scic_sds_stp_remote_device_ready_substate_start_request_handler - start stp
+ * @device: The target device a task management request towards to.
+ * @request: The task request.
  *
- * status of the object as a isci_status enum.
+ * This is the READY NCQ substate handler to start task management request. In
+ * this routine, we suspend and resume the RNC.  enum sci_status Always return
+ * SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS status to let
+ * controller_start_task_handler know that the controller can't post TC for
+ * task request yet, instead, when RNC gets resumed, a controller_continue_task
+ * callback will be called.
  */
-void isci_remote_device_change_state(
-       struct isci_remote_device *isci_device,
-       enum isci_status status)
+static enum sci_status scic_sds_stp_remote_device_ready_substate_start_request_handler(
+       struct scic_sds_remote_device *device,
+       struct scic_sds_request *request)
+{
+       enum sci_status status;
+
+       /* Will the port allow the io request to start? */
+       status = device->owning_port->state_handlers->start_io_handler(
+               device->owning_port, device, request);
+       if (status != SCI_SUCCESS)
+               return status;
+
+       status = scic_sds_remote_node_context_start_task(&device->rnc, request);
+       if (status != SCI_SUCCESS)
+               goto out;
+
+       status = request->state_handlers->start_handler(request);
+       if (status != SCI_SUCCESS)
+               goto out;
+
+       /*
+        * Note: If the remote device state is not IDLE this will replace
+        * the request that probably resulted in the task management request.
+        */
+       device->working_request = request;
+       sci_base_state_machine_change_state(&device->state_machine,
+                       SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD);
+
+       /*
+        * The remote node context must cleanup the TCi to NCQ mapping table.
+        * The only way to do this correctly is to either write to the TLCR
+        * register or to invalidate and repost the RNC. In either case the
+        * remote node context state machine will take the correct action when
+        * the remote node context is suspended and later resumed.
+        */
+       scic_sds_remote_node_context_suspend(&device->rnc,
+                       SCI_SOFTWARE_SUSPENSION, NULL, NULL);
+       scic_sds_remote_node_context_resume(&device->rnc,
+                       scic_sds_remote_device_continue_request,
+                       device);
+
+out:
+       scic_sds_remote_device_start_request(device, request, status);
+       /*
+        * We need to let the controller start request handler know that it can't
+        * post TC yet. We will provide a callback function to post TC when RNC gets
+        * resumed.
+        */
+       return SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS;
+}
+
+/* handle the start io operation for a sata device that is in the command idle
+ * state. - Evalute the type of IO request to be started - If its an NCQ
+ * request change to NCQ substate - If its any other command change to the CMD
+ * substate
+ *
+ * If this is a softreset we may want to have a different substate.
+ */
+static enum sci_status scic_sds_stp_remote_device_ready_idle_substate_start_io_handler(
+       struct scic_sds_remote_device *sci_dev,
+       struct scic_sds_request *request)
+{
+       enum sci_status status;
+       struct isci_request *isci_request = request->ireq;
+       enum scic_sds_remote_device_states new_state;
+
+       /* Will the port allow the io request to start? */
+       status = sci_dev->owning_port->state_handlers->start_io_handler(
+                       sci_dev->owning_port, sci_dev, request);
+       if (status != SCI_SUCCESS)
+               return status;
+
+       status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, request);
+       if (status != SCI_SUCCESS)
+               goto out;
+
+       status = request->state_handlers->start_handler(request);
+       if (status != SCI_SUCCESS)
+               goto out;
+
+       if (isci_sata_get_sat_protocol(isci_request) == SAT_PROTOCOL_FPDMA)
+               new_state = SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ;
+       else {
+               sci_dev->working_request = request;
+               new_state = SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD;
+       }
+       sci_base_state_machine_change_state(&sci_dev->state_machine, new_state);
+out:
+       scic_sds_remote_device_start_request(sci_dev, request, status);
+       return status;
+}
+
+
+static enum sci_status scic_sds_stp_remote_device_ready_idle_substate_event_handler(
+       struct scic_sds_remote_device *sci_dev,
+       u32 event_code)
+{
+       enum sci_status status;
+
+       status = scic_sds_remote_device_general_event_handler(sci_dev, event_code);
+       if (status != SCI_SUCCESS)
+               return status;
+
+       /* We pick up suspension events to handle specifically to this state. We
+        * resume the RNC right away. enum sci_status
+        */
+       if (scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX ||
+           scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX)
+               status = scic_sds_remote_node_context_resume(&sci_dev->rnc, NULL, NULL);
+
+       return status;
+}
+
+static enum sci_status scic_sds_stp_remote_device_ready_ncq_substate_start_io_handler(
+       struct scic_sds_remote_device *sci_dev,
+       struct scic_sds_request *request)
+{
+       enum sci_status status;
+       struct isci_request *isci_request = request->ireq;
+       scic_sds_port_io_request_handler_t start_io;
+
+       if (isci_sata_get_sat_protocol(isci_request) == SAT_PROTOCOL_FPDMA) {
+               start_io = sci_dev->owning_port->state_handlers->start_io_handler;
+               status = start_io(sci_dev->owning_port, sci_dev, request);
+               if (status != SCI_SUCCESS)
+                       return status;
+
+               status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, request);
+               if (status != SCI_SUCCESS)
+                       return status;
+
+               status = request->state_handlers->start_handler(request);
+
+               scic_sds_remote_device_start_request(sci_dev, request, status);
+       } else
+               status = SCI_FAILURE_INVALID_STATE;
+
+       return status;
+}
+
+static enum sci_status scic_sds_stp_remote_device_ready_ncq_substate_frame_handler(struct scic_sds_remote_device *sci_dev,
+                                                                                  u32 frame_index)
+{
+       enum sci_status status;
+       struct sata_fis_header *frame_header;
+       struct scic_sds_controller *scic = sci_dev->owning_port->owning_controller;
+
+       status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control,
+                                                              frame_index,
+                                                              (void **)&frame_header);
+       if (status != SCI_SUCCESS)
+               return status;
+
+       if (frame_header->fis_type == SATA_FIS_TYPE_SETDEVBITS &&
+           (frame_header->status & ATA_STATUS_REG_ERROR_BIT)) {
+               sci_dev->not_ready_reason = SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED;
+
+               /* TODO Check sactive and complete associated IO if any. */
+
+               sci_base_state_machine_change_state(&sci_dev->state_machine,
+                                                   SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR);
+       } else if (frame_header->fis_type == SATA_FIS_TYPE_REGD2H &&
+                  (frame_header->status & ATA_STATUS_REG_ERROR_BIT)) {
+               /*
+                * Some devices return D2H FIS when an NCQ error is detected.
+                * Treat this like an SDB error FIS ready reason.
+                */
+               sci_dev->not_ready_reason = SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED;
+
+               sci_base_state_machine_change_state(&sci_dev->state_machine,
+                                                   SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR);
+       } else
+               status = SCI_FAILURE;
+
+       scic_sds_controller_release_frame(scic, frame_index);
+
+       return status;
+}
+
+static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_start_io_handler(
+       struct scic_sds_remote_device *device,
+       struct scic_sds_request *request)
+{
+       /* device is already handling a command it can not accept new commands
+        * until this one is complete.
+        */
+       return SCI_FAILURE_INVALID_STATE;
+}
+
+static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_suspend_handler(
+       struct scic_sds_remote_device *sci_dev,
+       u32 suspend_type)
+{
+       enum sci_status status;
+
+       status = scic_sds_remote_node_context_suspend(&sci_dev->rnc,
+                                                     suspend_type, NULL, NULL);
+
+       return status;
+}
+
+static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_frame_handler(
+       struct scic_sds_remote_device *sci_dev,
+       u32 frame_index)
+{
+       /* The device doe not process any UF received from the hardware while
+        * in this state.  All unsolicited frames are forwarded to the io
+        * request object.
+        */
+       return scic_sds_io_request_frame_handler(sci_dev->working_request,
+                                                frame_index);
+}
+
+static enum sci_status scic_sds_stp_remote_device_ready_await_reset_substate_start_io_handler(
+       struct scic_sds_remote_device *device,
+       struct scic_sds_request *request)
+{
+       return SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED;
+}
+
+static enum sci_status scic_sds_stp_remote_device_ready_await_reset_substate_complete_request_handler(
+       struct scic_sds_remote_device *device,
+       struct scic_sds_request *request)
+{
+       struct scic_sds_request *sci_req = request;
+       enum sci_status status;
+
+       status = scic_sds_io_request_complete(sci_req);
+       if (status != SCI_SUCCESS)
+               goto out;
+
+       status = scic_sds_port_complete_io(device->owning_port, device, sci_req);
+       if (status != SCI_SUCCESS)
+               goto out;
+
+       scic_sds_remote_device_decrement_request_count(device);
+ out:
+       if (status != SCI_SUCCESS)
+               dev_err(scirdev_to_dev(device),
+                       "%s: Port:0x%p Device:0x%p Request:0x%p Status:0x%x "
+                       "could not complete\n",
+                       __func__, device->owning_port, device, sci_req, status);
+
+       return status;
+}
+
+static void scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler(void *_dev)
+{
+       struct scic_sds_remote_device *sci_dev = _dev;
+       struct isci_remote_device *idev = sci_dev_to_idev(sci_dev);
+       struct scic_sds_controller *scic = sci_dev->owning_port->owning_controller;
+
+       /* For NCQ operation we do not issue a isci_remote_device_not_ready().
+        * As a result, avoid sending the ready notification.
+        */
+       if (sci_dev->state_machine.previous_state_id != SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ)
+               isci_remote_device_ready(scic->ihost, idev);
+}
+
+static enum sci_status scic_sds_smp_remote_device_ready_idle_substate_start_io_handler(
+       struct scic_sds_remote_device *sci_dev,
+       struct scic_sds_request *sci_req)
+{
+       enum sci_status status;
+
+       /* Will the port allow the io request to start? */
+       status = sci_dev->owning_port->state_handlers->start_io_handler(
+                       sci_dev->owning_port, sci_dev, sci_req);
+       if (status != SCI_SUCCESS)
+               return status;
+
+       status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, sci_req);
+       if (status != SCI_SUCCESS)
+               return status;
+
+       status = scic_sds_request_start(sci_req);
+       if (status != SCI_SUCCESS)
+               return status;
+
+       sci_dev->working_request = sci_req;
+       sci_base_state_machine_change_state(&sci_dev->state_machine,
+                                           SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD);
+
+       scic_sds_remote_device_start_request(sci_dev, sci_req, status);
+
+       return status;
+}
+
+static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_start_io_handler(
+       struct scic_sds_remote_device *device,
+       struct scic_sds_request *request)
+{
+       /* device is already handling a command it can not accept new commands
+        * until this one is complete.
+        */
+       return SCI_FAILURE_INVALID_STATE;
+}
+
+static enum sci_status
+scic_sds_smp_remote_device_ready_cmd_substate_complete_io_handler(struct scic_sds_remote_device *sci_dev,
+                                                                 struct scic_sds_request *sci_req)
+{
+       enum sci_status status;
+
+       status = scic_sds_io_request_complete(sci_req);
+       if (status != SCI_SUCCESS)
+               return status;
+
+       status = scic_sds_port_complete_io(sci_dev->owning_port, sci_dev, sci_req);
+       if (status != SCI_SUCCESS) {
+               dev_err(scirdev_to_dev(sci_dev),
+                       "%s: SCIC SDS Remote Device 0x%p io request "
+                       "0x%p could not be completd on the port 0x%p "
+                       "failed with status %d.\n", __func__, sci_dev, sci_req,
+                       sci_dev->owning_port, status);
+               return status;
+       }
+
+       scic_sds_remote_device_decrement_request_count(sci_dev);
+       sci_base_state_machine_change_state(&sci_dev->state_machine,
+                                           SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE);
+
+       return status;
+}
+
+static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_frame_handler(
+       struct scic_sds_remote_device *sci_dev,
+       u32 frame_index)
+{
+       enum sci_status status;
+
+       /* The device does not process any UF received from the hardware while
+        * in this state.  All unsolicited frames are forwarded to the io request
+        * object.
+        */
+       status = scic_sds_io_request_frame_handler(
+               sci_dev->working_request,
+               frame_index
+               );
+
+       return status;
+}
+
+static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_state_handler_table[] = {
+       [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = {
+               .start_handler          = scic_sds_remote_device_default_start_handler,
+               .stop_handler           = scic_sds_remote_device_default_stop_handler,
+               .fail_handler           = scic_sds_remote_device_default_fail_handler,
+               .destruct_handler       = scic_sds_remote_device_default_destruct_handler,
+               .reset_handler          = scic_sds_remote_device_default_reset_handler,
+               .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
+               .start_io_handler       = scic_sds_remote_device_default_start_request_handler,
+               .complete_io_handler    = scic_sds_remote_device_default_complete_request_handler,
+               .continue_io_handler    = scic_sds_remote_device_default_continue_request_handler,
+               .start_task_handler     = scic_sds_remote_device_default_start_request_handler,
+               .complete_task_handler  = scic_sds_remote_device_default_complete_request_handler,
+               .suspend_handler        = scic_sds_remote_device_default_suspend_handler,
+               .resume_handler         = scic_sds_remote_device_default_resume_handler,
+               .event_handler          = scic_sds_remote_device_default_event_handler,
+               .frame_handler          = scic_sds_remote_device_default_frame_handler
+       },
+       [SCI_BASE_REMOTE_DEVICE_STATE_STOPPED] = {
+               .start_handler          = scic_sds_remote_device_stopped_state_start_handler,
+               .stop_handler           = scic_sds_remote_device_stopped_state_stop_handler,
+               .fail_handler           = scic_sds_remote_device_default_fail_handler,
+               .destruct_handler       = scic_sds_remote_device_stopped_state_destruct_handler,
+               .reset_handler          = scic_sds_remote_device_default_reset_handler,
+               .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
+               .start_io_handler       = scic_sds_remote_device_default_start_request_handler,
+               .complete_io_handler    = scic_sds_remote_device_default_complete_request_handler,
+               .continue_io_handler    = scic_sds_remote_device_default_continue_request_handler,
+               .start_task_handler     = scic_sds_remote_device_default_start_request_handler,
+               .complete_task_handler  = scic_sds_remote_device_default_complete_request_handler,
+               .suspend_handler        = scic_sds_remote_device_default_suspend_handler,
+               .resume_handler         = scic_sds_remote_device_default_resume_handler,
+               .event_handler          = scic_sds_remote_device_default_event_handler,
+               .frame_handler          = scic_sds_remote_device_default_frame_handler
+       },
+       [SCI_BASE_REMOTE_DEVICE_STATE_STARTING] = {
+               .start_handler          = scic_sds_remote_device_default_start_handler,
+               .stop_handler           = scic_sds_remote_device_starting_state_stop_handler,
+               .fail_handler           = scic_sds_remote_device_default_fail_handler,
+               .destruct_handler       = scic_sds_remote_device_default_destruct_handler,
+               .reset_handler          = scic_sds_remote_device_default_reset_handler,
+               .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
+               .start_io_handler       = scic_sds_remote_device_default_start_request_handler,
+               .complete_io_handler    = scic_sds_remote_device_default_complete_request_handler,
+               .continue_io_handler    = scic_sds_remote_device_default_continue_request_handler,
+               .start_task_handler     = scic_sds_remote_device_default_start_request_handler,
+               .complete_task_handler  = scic_sds_remote_device_default_complete_request_handler,
+               .suspend_handler        = scic_sds_remote_device_default_suspend_handler,
+               .resume_handler         = scic_sds_remote_device_default_resume_handler,
+               .event_handler          = scic_sds_remote_device_general_event_handler,
+               .frame_handler          = scic_sds_remote_device_default_frame_handler
+       },
+       [SCI_BASE_REMOTE_DEVICE_STATE_READY] = {
+               .start_handler          = scic_sds_remote_device_default_start_handler,
+               .stop_handler           = scic_sds_remote_device_ready_state_stop_handler,
+               .fail_handler           = scic_sds_remote_device_default_fail_handler,
+               .destruct_handler       = scic_sds_remote_device_default_destruct_handler,
+               .reset_handler          = scic_sds_remote_device_ready_state_reset_handler,
+               .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
+               .start_io_handler       = scic_sds_remote_device_ready_state_start_io_handler,
+               .complete_io_handler    = scic_sds_remote_device_ready_state_complete_request_handler,
+               .continue_io_handler    = scic_sds_remote_device_default_continue_request_handler,
+               .start_task_handler     = scic_sds_remote_device_ready_state_start_task_handler,
+               .complete_task_handler  = scic_sds_remote_device_ready_state_complete_request_handler,
+               .suspend_handler        = scic_sds_remote_device_default_suspend_handler,
+               .resume_handler         = scic_sds_remote_device_default_resume_handler,
+               .event_handler          = scic_sds_remote_device_general_event_handler,
+               .frame_handler          = scic_sds_remote_device_general_frame_handler,
+       },
+       [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = {
+               .start_handler          = scic_sds_remote_device_default_start_handler,
+               .stop_handler           = scic_sds_remote_device_ready_state_stop_handler,
+               .fail_handler           = scic_sds_remote_device_default_fail_handler,
+               .destruct_handler       = scic_sds_remote_device_default_destruct_handler,
+               .reset_handler          = scic_sds_remote_device_ready_state_reset_handler,
+               .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
+               .start_io_handler       = scic_sds_stp_remote_device_ready_idle_substate_start_io_handler,
+               .complete_io_handler    = scic_sds_remote_device_default_complete_request_handler,
+               .continue_io_handler    = scic_sds_remote_device_default_continue_request_handler,
+               .start_task_handler     = scic_sds_stp_remote_device_ready_substate_start_request_handler,
+               .complete_task_handler  = scic_sds_remote_device_default_complete_request_handler,
+               .suspend_handler                = scic_sds_remote_device_default_suspend_handler,
+               .resume_handler                 = scic_sds_remote_device_default_resume_handler,
+               .event_handler                  = scic_sds_stp_remote_device_ready_idle_substate_event_handler,
+               .frame_handler                  = scic_sds_remote_device_default_frame_handler
+       },
+       [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = {
+               .start_handler          = scic_sds_remote_device_default_start_handler,
+               .stop_handler           = scic_sds_remote_device_ready_state_stop_handler,
+               .fail_handler           = scic_sds_remote_device_default_fail_handler,
+               .destruct_handler       = scic_sds_remote_device_default_destruct_handler,
+               .reset_handler          = scic_sds_remote_device_ready_state_reset_handler,
+               .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
+               .start_io_handler       = scic_sds_stp_remote_device_ready_cmd_substate_start_io_handler,
+               .complete_io_handler    = scic_sds_stp_remote_device_complete_request,
+               .continue_io_handler    = scic_sds_remote_device_default_continue_request_handler,
+               .start_task_handler     = scic_sds_stp_remote_device_ready_substate_start_request_handler,
+               .complete_task_handler  = scic_sds_stp_remote_device_complete_request,
+               .suspend_handler                = scic_sds_stp_remote_device_ready_cmd_substate_suspend_handler,
+               .resume_handler                 = scic_sds_remote_device_default_resume_handler,
+               .event_handler                  = scic_sds_remote_device_general_event_handler,
+               .frame_handler                  = scic_sds_stp_remote_device_ready_cmd_substate_frame_handler
+       },
+       [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ] = {
+               .start_handler          = scic_sds_remote_device_default_start_handler,
+               .stop_handler           = scic_sds_remote_device_ready_state_stop_handler,
+               .fail_handler           = scic_sds_remote_device_default_fail_handler,
+               .destruct_handler       = scic_sds_remote_device_default_destruct_handler,
+               .reset_handler          = scic_sds_remote_device_ready_state_reset_handler,
+               .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
+               .start_io_handler       = scic_sds_stp_remote_device_ready_ncq_substate_start_io_handler,
+               .complete_io_handler    = scic_sds_stp_remote_device_complete_request,
+               .continue_io_handler    = scic_sds_remote_device_default_continue_request_handler,
+               .start_task_handler     = scic_sds_stp_remote_device_ready_substate_start_request_handler,
+               .complete_task_handler  = scic_sds_stp_remote_device_complete_request,
+               .suspend_handler                = scic_sds_remote_device_default_suspend_handler,
+               .resume_handler                 = scic_sds_remote_device_default_resume_handler,
+               .event_handler                  = scic_sds_remote_device_general_event_handler,
+               .frame_handler                  = scic_sds_stp_remote_device_ready_ncq_substate_frame_handler
+       },
+       [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR] = {
+               .start_handler          = scic_sds_remote_device_default_start_handler,
+               .stop_handler           = scic_sds_remote_device_ready_state_stop_handler,
+               .fail_handler           = scic_sds_remote_device_default_fail_handler,
+               .destruct_handler       = scic_sds_remote_device_default_destruct_handler,
+               .reset_handler          = scic_sds_remote_device_ready_state_reset_handler,
+               .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
+               .start_io_handler       = scic_sds_remote_device_default_start_request_handler,
+               .complete_io_handler    = scic_sds_stp_remote_device_complete_request,
+               .continue_io_handler    = scic_sds_remote_device_default_continue_request_handler,
+               .start_task_handler     = scic_sds_stp_remote_device_ready_substate_start_request_handler,
+               .complete_task_handler  = scic_sds_stp_remote_device_complete_request,
+               .suspend_handler                = scic_sds_remote_device_default_suspend_handler,
+               .resume_handler                 = scic_sds_remote_device_default_resume_handler,
+               .event_handler                  = scic_sds_remote_device_general_event_handler,
+               .frame_handler                  = scic_sds_remote_device_general_frame_handler
+       },
+       [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET] = {
+               .start_handler          = scic_sds_remote_device_default_start_handler,
+               .stop_handler           = scic_sds_remote_device_ready_state_stop_handler,
+               .fail_handler           = scic_sds_remote_device_default_fail_handler,
+               .destruct_handler       = scic_sds_remote_device_default_destruct_handler,
+               .reset_handler          = scic_sds_remote_device_ready_state_reset_handler,
+               .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
+               .start_io_handler       = scic_sds_stp_remote_device_ready_await_reset_substate_start_io_handler,
+               .complete_io_handler    = scic_sds_stp_remote_device_ready_await_reset_substate_complete_request_handler,
+               .continue_io_handler    = scic_sds_remote_device_default_continue_request_handler,
+               .start_task_handler     = scic_sds_stp_remote_device_ready_substate_start_request_handler,
+               .complete_task_handler  = scic_sds_stp_remote_device_complete_request,
+               .suspend_handler                = scic_sds_remote_device_default_suspend_handler,
+               .resume_handler                 = scic_sds_remote_device_default_resume_handler,
+               .event_handler                  = scic_sds_remote_device_general_event_handler,
+               .frame_handler                  = scic_sds_remote_device_general_frame_handler
+       },
+       [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = {
+               .start_handler          = scic_sds_remote_device_default_start_handler,
+               .stop_handler           = scic_sds_remote_device_ready_state_stop_handler,
+               .fail_handler           = scic_sds_remote_device_default_fail_handler,
+               .destruct_handler       = scic_sds_remote_device_default_destruct_handler,
+               .reset_handler          = scic_sds_remote_device_default_reset_handler,
+               .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
+               .start_io_handler       = scic_sds_smp_remote_device_ready_idle_substate_start_io_handler,
+               .complete_io_handler    = scic_sds_remote_device_default_complete_request_handler,
+               .continue_io_handler    = scic_sds_remote_device_default_continue_request_handler,
+               .start_task_handler     = scic_sds_remote_device_default_start_request_handler,
+               .complete_task_handler  = scic_sds_remote_device_default_complete_request_handler,
+               .suspend_handler        = scic_sds_remote_device_default_suspend_handler,
+               .resume_handler         = scic_sds_remote_device_default_resume_handler,
+               .event_handler          = scic_sds_remote_device_general_event_handler,
+               .frame_handler          = scic_sds_remote_device_default_frame_handler
+       },
+       [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = {
+               .start_handler          = scic_sds_remote_device_default_start_handler,
+               .stop_handler           = scic_sds_remote_device_ready_state_stop_handler,
+               .fail_handler           = scic_sds_remote_device_default_fail_handler,
+               .destruct_handler       = scic_sds_remote_device_default_destruct_handler,
+               .reset_handler          = scic_sds_remote_device_default_reset_handler,
+               .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
+               .start_io_handler       = scic_sds_smp_remote_device_ready_cmd_substate_start_io_handler,
+               .complete_io_handler    = scic_sds_smp_remote_device_ready_cmd_substate_complete_io_handler,
+               .continue_io_handler    = scic_sds_remote_device_default_continue_request_handler,
+               .start_task_handler     = scic_sds_remote_device_default_start_request_handler,
+               .complete_task_handler  = scic_sds_remote_device_default_complete_request_handler,
+               .suspend_handler        = scic_sds_remote_device_default_suspend_handler,
+               .resume_handler         = scic_sds_remote_device_default_resume_handler,
+               .event_handler          = scic_sds_remote_device_general_event_handler,
+               .frame_handler          = scic_sds_smp_remote_device_ready_cmd_substate_frame_handler
+       },
+       [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = {
+               .start_handler          = scic_sds_remote_device_default_start_handler,
+               .stop_handler           = scic_sds_remote_device_stopping_state_stop_handler,
+               .fail_handler           = scic_sds_remote_device_default_fail_handler,
+               .destruct_handler       = scic_sds_remote_device_default_destruct_handler,
+               .reset_handler          = scic_sds_remote_device_default_reset_handler,
+               .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
+               .start_io_handler       = scic_sds_remote_device_default_start_request_handler,
+               .complete_io_handler    = scic_sds_remote_device_stopping_state_complete_request_handler,
+               .continue_io_handler    = scic_sds_remote_device_default_continue_request_handler,
+               .start_task_handler     = scic_sds_remote_device_default_start_request_handler,
+               .complete_task_handler  = scic_sds_remote_device_stopping_state_complete_request_handler,
+               .suspend_handler        = scic_sds_remote_device_default_suspend_handler,
+               .resume_handler         = scic_sds_remote_device_default_resume_handler,
+               .event_handler          = scic_sds_remote_device_general_event_handler,
+               .frame_handler          = scic_sds_remote_device_general_frame_handler
+       },
+       [SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = {
+               .start_handler          = scic_sds_remote_device_default_start_handler,
+               .stop_handler           = scic_sds_remote_device_default_stop_handler,
+               .fail_handler           = scic_sds_remote_device_default_fail_handler,
+               .destruct_handler       = scic_sds_remote_device_default_destruct_handler,
+               .reset_handler          = scic_sds_remote_device_default_reset_handler,
+               .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
+               .start_io_handler       = scic_sds_remote_device_default_start_request_handler,
+               .complete_io_handler    = scic_sds_remote_device_default_complete_request_handler,
+               .continue_io_handler    = scic_sds_remote_device_default_continue_request_handler,
+               .start_task_handler     = scic_sds_remote_device_default_start_request_handler,
+               .complete_task_handler  = scic_sds_remote_device_default_complete_request_handler,
+               .suspend_handler        = scic_sds_remote_device_default_suspend_handler,
+               .resume_handler         = scic_sds_remote_device_default_resume_handler,
+               .event_handler          = scic_sds_remote_device_default_event_handler,
+               .frame_handler          = scic_sds_remote_device_general_frame_handler
+       },
+       [SCI_BASE_REMOTE_DEVICE_STATE_RESETTING] = {
+               .start_handler          = scic_sds_remote_device_default_start_handler,
+               .stop_handler           = scic_sds_remote_device_resetting_state_stop_handler,
+               .fail_handler           = scic_sds_remote_device_default_fail_handler,
+               .destruct_handler       = scic_sds_remote_device_default_destruct_handler,
+               .reset_handler          = scic_sds_remote_device_default_reset_handler,
+               .reset_complete_handler = scic_sds_remote_device_resetting_state_reset_complete_handler,
+               .start_io_handler       = scic_sds_remote_device_default_start_request_handler,
+               .complete_io_handler    = scic_sds_remote_device_resetting_state_complete_request_handler,
+               .continue_io_handler    = scic_sds_remote_device_default_continue_request_handler,
+               .start_task_handler     = scic_sds_remote_device_default_start_request_handler,
+               .complete_task_handler  = scic_sds_remote_device_resetting_state_complete_request_handler,
+               .suspend_handler        = scic_sds_remote_device_default_suspend_handler,
+               .resume_handler         = scic_sds_remote_device_default_resume_handler,
+               .event_handler          = scic_sds_remote_device_default_event_handler,
+               .frame_handler          = scic_sds_remote_device_general_frame_handler
+       },
+       [SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = {
+               .start_handler          = scic_sds_remote_device_default_start_handler,
+               .stop_handler           = scic_sds_remote_device_default_stop_handler,
+               .fail_handler           = scic_sds_remote_device_default_fail_handler,
+               .destruct_handler       = scic_sds_remote_device_default_destruct_handler,
+               .reset_handler          = scic_sds_remote_device_default_reset_handler,
+               .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
+               .start_io_handler       = scic_sds_remote_device_default_start_request_handler,
+               .complete_io_handler    = scic_sds_remote_device_default_complete_request_handler,
+               .continue_io_handler    = scic_sds_remote_device_default_continue_request_handler,
+               .start_task_handler     = scic_sds_remote_device_default_start_request_handler,
+               .complete_task_handler  = scic_sds_remote_device_default_complete_request_handler,
+               .suspend_handler        = scic_sds_remote_device_default_suspend_handler,
+               .resume_handler         = scic_sds_remote_device_default_resume_handler,
+               .event_handler          = scic_sds_remote_device_default_event_handler,
+               .frame_handler          = scic_sds_remote_device_default_frame_handler
+       }
+};
+
+static void scic_sds_remote_device_initial_state_enter(void *object)
 {
-       unsigned long flags;
+       struct scic_sds_remote_device *sci_dev = object;
 
-       spin_lock_irqsave(&isci_device->state_lock, flags);
-       isci_device->status = status;
-       spin_unlock_irqrestore(&isci_device->state_lock, flags);
+       SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table,
+                         SCI_BASE_REMOTE_DEVICE_STATE_INITIAL);
+
+       /* Initial state is a transitional state to the stopped state */
+       sci_base_state_machine_change_state(&sci_dev->state_machine,
+                                           SCI_BASE_REMOTE_DEVICE_STATE_STOPPED);
 }
 
 /**
@@ -1242,9 +1768,8 @@ static void scic_sds_remote_device_starting_state_enter(void *object)
 static void scic_sds_remote_device_ready_state_enter(void *object)
 {
        struct scic_sds_remote_device *sci_dev = object;
-       struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev);
-       struct isci_host *ihost = scic->ihost;
-       struct isci_remote_device *idev = sci_dev_to_idev(sci_dev);
+       struct scic_sds_controller *scic = sci_dev->owning_port->owning_controller;
+       struct domain_device *dev = sci_dev_to_domain(sci_dev);
 
        SET_STATE_HANDLER(sci_dev,
                          scic_sds_remote_device_state_handler_table,
@@ -1252,23 +1777,26 @@ static void scic_sds_remote_device_ready_state_enter(void *object)
 
        scic->remote_device_sequence[sci_dev->rnc.remote_node_index]++;
 
-       if (sci_dev->has_ready_substate_machine)
-               sci_base_state_machine_start(&sci_dev->ready_substate_machine);
-       else
-               isci_remote_device_ready(ihost, idev);
+       if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_SATA)) {
+               sci_base_state_machine_change_state(&sci_dev->state_machine,
+                                                   SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE);
+       } else if (dev_is_expander(dev)) {
+               sci_base_state_machine_change_state(&sci_dev->state_machine,
+                                                   SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE);
+       } else
+               isci_remote_device_ready(scic->ihost, sci_dev_to_idev(sci_dev));
 }
 
 static void scic_sds_remote_device_ready_state_exit(void *object)
 {
        struct scic_sds_remote_device *sci_dev = object;
-       if (sci_dev->has_ready_substate_machine)
-               sci_base_state_machine_stop(&sci_dev->ready_substate_machine);
-       else {
-               struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev);
-               struct isci_host *ihost = scic->ihost;
+       struct domain_device *dev = sci_dev_to_domain(sci_dev);
+
+       if (dev->dev_type == SAS_END_DEV) {
+               struct scic_sds_controller *scic = sci_dev->owning_port->owning_controller;
                struct isci_remote_device *idev = sci_dev_to_idev(sci_dev);
 
-               isci_remote_device_not_ready(ihost, idev,
+               isci_remote_device_not_ready(scic->ihost, idev,
                                             SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED);
        }
 }
@@ -1327,6 +1855,101 @@ static void scic_sds_remote_device_final_state_enter(void *object)
                );
 }
 
+static void scic_sds_stp_remote_device_ready_idle_substate_enter(void *object)
+{
+       struct scic_sds_remote_device *sci_dev = object;
+
+       SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table,
+                         SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE);
+
+       sci_dev->working_request = NULL;
+       if (scic_sds_remote_node_context_is_ready(&sci_dev->rnc)) {
+               /*
+                * Since the RNC is ready, it's alright to finish completion
+                * processing (e.g. signal the remote device is ready). */
+               scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler(sci_dev);
+       } else {
+               scic_sds_remote_node_context_resume(&sci_dev->rnc,
+                       scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler,
+                       sci_dev);
+       }
+}
+
+static void scic_sds_stp_remote_device_ready_cmd_substate_enter(void *object)
+{
+       struct scic_sds_remote_device *sci_dev = object;
+       struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev);
+
+       BUG_ON(sci_dev->working_request == NULL);
+
+       SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table,
+                         SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD);
+
+       isci_remote_device_not_ready(scic->ihost, sci_dev_to_idev(sci_dev),
+                                    SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED);
+}
+
+static void scic_sds_stp_remote_device_ready_ncq_substate_enter(void *object)
+{
+       struct scic_sds_remote_device *sci_dev = object;
+
+       SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table,
+                         SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ);
+}
+
+static void scic_sds_stp_remote_device_ready_ncq_error_substate_enter(void *object)
+{
+       struct scic_sds_remote_device *sci_dev = object;
+       struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev);
+       struct isci_remote_device *idev = sci_dev_to_idev(sci_dev);
+
+       SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table,
+                         SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR);
+
+       if (sci_dev->not_ready_reason == SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED)
+               isci_remote_device_not_ready(scic->ihost, idev,
+                                            sci_dev->not_ready_reason);
+}
+
+static void scic_sds_stp_remote_device_ready_await_reset_substate_enter(void *object)
+{
+       struct scic_sds_remote_device *sci_dev = object;
+
+       SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table,
+               SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET);
+}
+
+static void scic_sds_smp_remote_device_ready_idle_substate_enter(void *object)
+{
+       struct scic_sds_remote_device *sci_dev = object;
+       struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev);
+
+       SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table,
+                         SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE);
+
+       isci_remote_device_ready(scic->ihost, sci_dev_to_idev(sci_dev));
+}
+
+static void scic_sds_smp_remote_device_ready_cmd_substate_enter(void *object)
+{
+       struct scic_sds_remote_device *sci_dev = object;
+       struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev);
+
+       BUG_ON(sci_dev->working_request == NULL);
+
+       SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table,
+                         SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD);
+
+       isci_remote_device_not_ready(scic->ihost, sci_dev_to_idev(sci_dev),
+                                    SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED);
+}
+
+static void scic_sds_smp_remote_device_ready_cmd_substate_exit(void *object)
+{
+       struct scic_sds_remote_device *sci_dev = object;
+
+       sci_dev->working_request = NULL;
+}
 
 static const struct sci_base_state scic_sds_remote_device_state_table[] = {
        [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = {
@@ -1342,6 +1965,28 @@ static const struct sci_base_state scic_sds_remote_device_state_table[] = {
                .enter_state = scic_sds_remote_device_ready_state_enter,
                .exit_state  = scic_sds_remote_device_ready_state_exit
        },
+       [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = {
+               .enter_state = scic_sds_stp_remote_device_ready_idle_substate_enter,
+       },
+       [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = {
+               .enter_state = scic_sds_stp_remote_device_ready_cmd_substate_enter,
+       },
+       [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ] = {
+               .enter_state = scic_sds_stp_remote_device_ready_ncq_substate_enter,
+       },
+       [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR] = {
+               .enter_state = scic_sds_stp_remote_device_ready_ncq_error_substate_enter,
+       },
+       [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET] = {
+               .enter_state = scic_sds_stp_remote_device_ready_await_reset_substate_enter,
+       },
+       [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = {
+               .enter_state = scic_sds_smp_remote_device_ready_idle_substate_enter,
+       },
+       [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = {
+               .enter_state = scic_sds_smp_remote_device_ready_cmd_substate_enter,
+               .exit_state  = scic_sds_smp_remote_device_ready_cmd_substate_exit,
+       },
        [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = {
                .enter_state = scic_sds_remote_device_stopping_state_enter,
        },
@@ -1406,7 +2051,6 @@ static enum sci_status scic_remote_device_da_construct(struct scic_sds_port *sci
                                                       struct scic_sds_remote_device *sci_dev)
 {
        enum sci_status status;
-       u16 remote_node_index;
        struct domain_device *dev = sci_dev_to_domain(sci_dev);
 
        scic_remote_device_construct(sci_port, sci_dev);
@@ -1418,33 +2062,15 @@ static enum sci_status scic_remote_device_da_construct(struct scic_sds_port *sci
        sci_dev->is_direct_attached = true;
        status = scic_sds_controller_allocate_remote_node_context(sci_port->owning_controller,
                                                                  sci_dev,
-                                                                 &remote_node_index);
+                                                                 &sci_dev->rnc.remote_node_index);
 
        if (status != SCI_SUCCESS)
                return status;
 
-       sci_dev->rnc.remote_node_index = remote_node_index;
-
-       if (dev->dev_type == SAS_END_DEV)
-               sci_dev->has_ready_substate_machine = false;
-       else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) {
-               sci_dev->has_ready_substate_machine = true;
-
-               sci_base_state_machine_construct(
-                               &sci_dev->ready_substate_machine,
-                               sci_dev,
-                               scic_sds_stp_remote_device_ready_substate_table,
-                               SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE);
-       } else if (dev_is_expander(dev)) {
-               sci_dev->has_ready_substate_machine = true;
-
-               /* add the SMP ready substate machine construction here */
-               sci_base_state_machine_construct(
-                               &sci_dev->ready_substate_machine,
-                               sci_dev,
-                               scic_sds_smp_remote_device_ready_substate_table,
-                               SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE);
-       } else
+       if (dev->dev_type == SAS_END_DEV || dev->dev_type == SATA_DEV ||
+           (dev->tproto & SAS_PROTOCOL_STP) || dev_is_expander(dev))
+               /* pass */;
+       else
                return SCI_FAILURE_UNSUPPORTED_PROTOCOL;
 
        sci_dev->connection_rate = scic_sds_port_get_max_allowed_speed(sci_port);
@@ -1470,37 +2096,22 @@ static enum sci_status scic_remote_device_da_construct(struct scic_sds_port *sci
 static enum sci_status scic_remote_device_ea_construct(struct scic_sds_port *sci_port,
                                                       struct scic_sds_remote_device *sci_dev)
 {
-       struct scic_sds_controller *scic = sci_port->owning_controller;
        struct domain_device *dev = sci_dev_to_domain(sci_dev);
        enum sci_status status;
 
        scic_remote_device_construct(sci_port, sci_dev);
 
-       status = scic_sds_controller_allocate_remote_node_context(
-               scic, sci_dev, &sci_dev->rnc.remote_node_index);
+       status = scic_sds_controller_allocate_remote_node_context(sci_port->owning_controller,
+                                                                 sci_dev,
+                                                                 &sci_dev->rnc.remote_node_index);
        if (status != SCI_SUCCESS)
                return status;
 
-       if (dev->dev_type == SAS_END_DEV)
-               sci_dev->has_ready_substate_machine = false;
-       else if (dev_is_expander(dev)) {
-               sci_dev->has_ready_substate_machine = true;
-
-               /* add the SMP ready substate machine construction here */
-               sci_base_state_machine_construct(
-                               &sci_dev->ready_substate_machine,
-                               sci_dev,
-                               scic_sds_smp_remote_device_ready_substate_table,
-                               SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE);
-       } else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) {
-               sci_dev->has_ready_substate_machine = true;
-
-               sci_base_state_machine_construct(
-                               &sci_dev->ready_substate_machine,
-                               sci_dev,
-                               scic_sds_stp_remote_device_ready_substate_table,
-                               SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE);
-       }
+       if (dev->dev_type == SAS_END_DEV || dev->dev_type == SATA_DEV ||
+           (dev->tproto & SAS_PROTOCOL_STP) || dev_is_expander(dev))
+               /* pass */;
+       else
+               return SCI_FAILURE_UNSUPPORTED_PROTOCOL;
 
        /*
         * For SAS-2 the physical link rate is actually a logical link
@@ -1515,7 +2126,7 @@ static enum sci_status scic_remote_device_ea_construct(struct scic_sds_port *sci
        /* / @todo Should I assign the port width by reading all of the phys on the port? */
        sci_dev->device_port_width = 1;
 
-       return status;
+       return SCI_SUCCESS;
 }
 
 /**
@@ -1617,45 +2228,6 @@ isci_remote_device_alloc(struct isci_host *ihost, struct isci_port *iport)
        return idev;
 }
 
-/**
- * isci_remote_device_ready() - This function is called by the scic when the
- *    remote device is ready. We mark the isci device as ready and signal the
- *    waiting proccess.
- * @ihost: our valid isci_host
- * @idev: remote device
- *
- */
-void isci_remote_device_ready(struct isci_host *ihost, struct isci_remote_device *idev)
-{
-       dev_dbg(&ihost->pdev->dev,
-               "%s: idev = %p\n", __func__, idev);
-
-       isci_remote_device_change_state(idev, isci_ready_for_io);
-       if (test_and_clear_bit(IDEV_START_PENDING, &idev->flags))
-               wake_up(&ihost->eventq);
-}
-
-/**
- * isci_remote_device_not_ready() - This function is called by the scic when
- *    the remote device is not ready. We mark the isci device as ready (not
- *    "ready_for_io") and signal the waiting proccess.
- * @isci_host: This parameter specifies the isci host object.
- * @isci_device: This parameter specifies the remote device
- *
- */
-void isci_remote_device_not_ready(struct isci_host *ihost,
-                                 struct isci_remote_device *idev, u32 reason)
-{
-       dev_dbg(&ihost->pdev->dev,
-               "%s: isci_device = %p\n", __func__, idev);
-
-       if (reason == SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED)
-               isci_remote_device_change_state(idev, isci_stopping);
-       else
-               /* device ready is actually a "not ready for io" state. */
-               isci_remote_device_change_state(idev, isci_ready);
-}
-
 /**
  * isci_remote_device_stop() - This function is called internally to stop the
  *    remote device.
index 62623c766388e5d52a6eab775ef16f7ceefac2cf..dda217a6bd3a1d7504843676f5c078eef225880b 100644 (file)
@@ -68,9 +68,7 @@ enum scic_remote_device_not_ready_reason_code {
        SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED,
        SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED,
        SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED,
-
        SCIC_REMOTE_DEVICE_NOT_READY_REASON_CODE_MAX
-
 };
 
 struct scic_sds_remote_device {
@@ -131,19 +129,6 @@ struct scic_sds_remote_device {
         */
        u32 not_ready_reason;
 
-       /**
-        * This field is true if this remote device has an initialzied ready substate
-        * machine. SSP devices do not have a ready substate machine and STP devices
-        * have a ready substate machine.
-        */
-       bool has_ready_substate_machine;
-
-       /**
-        * This field contains the state machine for the ready substate machine for
-        * this struct scic_sds_remote_device object.
-        */
-       struct sci_base_state_machine ready_substate_machine;
-
        /**
         * This field maintains the set of state handlers for the remote device
         * object.  These are changed each time the remote device enters a new state.
@@ -171,10 +156,6 @@ enum sci_status isci_remote_device_stop(struct isci_host *ihost,
                                        struct isci_remote_device *idev);
 void isci_remote_device_nuke_requests(struct isci_host *ihost,
                                      struct isci_remote_device *idev);
-void isci_remote_device_ready(struct isci_host *ihost,
-                             struct isci_remote_device *idev);
-void isci_remote_device_not_ready(struct isci_host *ihost,
-                                 struct isci_remote_device *idev, u32 reason);
 void isci_remote_device_gone(struct domain_device *domain_dev);
 int isci_remote_device_found(struct domain_device *domain_dev);
 bool isci_device_is_reset_pending(struct isci_host *ihost,
@@ -277,77 +258,6 @@ enum scic_sds_remote_device_states {
         */
        SCI_BASE_REMOTE_DEVICE_STATE_READY,
 
-       /**
-        * This state indicates that the remote device is in the process of
-        * stopping.  In this state no new IO operations are permitted, but
-        * existing IO operations are allowed to complete.
-        * This state is entered from the READY state.
-        * This state is entered from the FAILED state.
-        */
-       SCI_BASE_REMOTE_DEVICE_STATE_STOPPING,
-
-       /**
-        * This state indicates that the remote device has failed.
-        * In this state no new IO operations are permitted.
-        * This state is entered from the INITIALIZING state.
-        * This state is entered from the READY state.
-        */
-       SCI_BASE_REMOTE_DEVICE_STATE_FAILED,
-
-       /**
-        * This state indicates the device is being reset.
-        * In this state no new IO operations are permitted.
-        * This state is entered from the READY state.
-        */
-       SCI_BASE_REMOTE_DEVICE_STATE_RESETTING,
-
-       /**
-        * Simply the final state for the base remote device state machine.
-        */
-       SCI_BASE_REMOTE_DEVICE_STATE_FINAL,
-};
-
-/**
- * enum scic_sds_ssp_remote_device_ready_substates -
- *
- * This is the enumeration of the ready substates for the
- * struct scic_sds_remote_device.
- */
-enum scic_sds_ssp_remote_device_ready_substates {
-       /**
-        * This is the initial state for the remote device ready substate.
-        */
-       SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_INITIAL,
-
-       /**
-        * This is the ready operational substate for the remote device.
-        * This is the normal operational state for a remote device.
-        */
-       SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_OPERATIONAL,
-
-       /**
-        * This is the suspended state for the remote device. This is the state
-        * that the device is placed in when a RNC suspend is received by
-        * the SCU hardware.
-        */
-       SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_SUSPENDED,
-
-       /**
-        * This is the final state that the device is placed in before a change
-        * to the base state machine.
-        */
-       SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_FINAL,
-
-       SCIC_SDS_SSP_REMOTE_DEVICE_READY_MAX_SUBSTATES
-};
-
-/**
- * enum scic_sds_stp_remote_device_ready_substates -
- *
- * This is the enumeration for the struct scic_sds_remote_device ready substates
- * for the STP remote device.
- */
-enum scic_sds_stp_remote_device_ready_substates {
        /**
         * This is the idle substate for the stp remote device.  When there are no
         * active IO for the device it is is in this state.
@@ -381,14 +291,7 @@ enum scic_sds_stp_remote_device_ready_substates {
         * coming to be recovered from certain hardware specific error.
         */
        SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET,
-};
 
-/**
- * enum scic_sds_smp_remote_device_ready_substates -
- *
- * This is the enumeration of the ready substates for the SMP REMOTE DEVICE.
- */
-enum scic_sds_smp_remote_device_ready_substates {
        /**
         * This is the ready operational substate for the remote device.  This is the
         * normal operational state for a remote device.
@@ -400,6 +303,35 @@ enum scic_sds_smp_remote_device_ready_substates {
         * the device is placed in when a RNC suspend is received by the SCU hardware.
         */
        SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD,
+
+       /**
+        * This state indicates that the remote device is in the process of
+        * stopping.  In this state no new IO operations are permitted, but
+        * existing IO operations are allowed to complete.
+        * This state is entered from the READY state.
+        * This state is entered from the FAILED state.
+        */
+       SCI_BASE_REMOTE_DEVICE_STATE_STOPPING,
+
+       /**
+        * This state indicates that the remote device has failed.
+        * In this state no new IO operations are permitted.
+        * This state is entered from the INITIALIZING state.
+        * This state is entered from the READY state.
+        */
+       SCI_BASE_REMOTE_DEVICE_STATE_FAILED,
+
+       /**
+        * This state indicates the device is being reset.
+        * In this state no new IO operations are permitted.
+        * This state is entered from the READY state.
+        */
+       SCI_BASE_REMOTE_DEVICE_STATE_RESETTING,
+
+       /**
+        * Simply the final state for the base remote device state machine.
+        */
+       SCI_BASE_REMOTE_DEVICE_STATE_FINAL,
 };
 
 static inline struct scic_sds_remote_device *rnc_to_dev(struct scic_sds_remote_node_context *rnc)
@@ -541,10 +473,6 @@ struct scic_sds_remote_device_state_handler {
        scic_sds_remote_device_frame_handler_t frame_handler;
 };
 
-extern const struct sci_base_state scic_sds_ssp_remote_device_ready_substate_table[];
-extern const struct sci_base_state scic_sds_stp_remote_device_ready_substate_table[];
-extern const struct sci_base_state scic_sds_smp_remote_device_ready_substate_table[];
-
 /**
  * scic_sds_remote_device_increment_request_count() -
  *
@@ -672,92 +600,24 @@ enum sci_status scic_sds_remote_device_start_io(
        struct scic_sds_remote_device *sci_dev,
        struct scic_sds_request *io_request);
 
-enum sci_status scic_sds_remote_device_complete_io(
+enum sci_status scic_sds_remote_device_start_task(
        struct scic_sds_controller *controller,
        struct scic_sds_remote_device *sci_dev,
        struct scic_sds_request *io_request);
 
-enum sci_status scic_sds_remote_device_resume(
-       struct scic_sds_remote_device *sci_dev);
+enum sci_status scic_sds_remote_device_complete_io(
+       struct scic_sds_controller *controller,
+       struct scic_sds_remote_device *sci_dev,
+       struct scic_sds_request *io_request);
 
 enum sci_status scic_sds_remote_device_suspend(
        struct scic_sds_remote_device *sci_dev,
        u32 suspend_type);
 
-enum sci_status scic_sds_remote_device_start_task(
-       struct scic_sds_controller *controller,
-       struct scic_sds_remote_device *sci_dev,
-       struct scic_sds_request *io_request);
-
 void scic_sds_remote_device_post_request(
        struct scic_sds_remote_device *sci_dev,
        u32 request);
 
 #define scic_sds_remote_device_is_atapi(sci_dev) false
 
-void scic_sds_remote_device_start_request(
-       struct scic_sds_remote_device *sci_dev,
-       struct scic_sds_request *sci_req,
-       enum sci_status status);
-
-void scic_sds_remote_device_continue_request(void *sci_dev);
-
-enum sci_status scic_sds_remote_device_default_start_handler(
-       struct scic_sds_remote_device *sci_dev);
-
-enum sci_status scic_sds_remote_device_default_fail_handler(
-       struct scic_sds_remote_device *sci_dev);
-
-enum sci_status scic_sds_remote_device_default_destruct_handler(
-       struct scic_sds_remote_device *sci_dev);
-
-enum sci_status scic_sds_remote_device_default_reset_handler(
-       struct scic_sds_remote_device *device);
-
-enum sci_status scic_sds_remote_device_default_reset_complete_handler(
-       struct scic_sds_remote_device *device);
-
-enum sci_status scic_sds_remote_device_default_start_request_handler(
-       struct scic_sds_remote_device *device,
-       struct scic_sds_request *request);
-
-enum sci_status scic_sds_remote_device_default_complete_request_handler(
-       struct scic_sds_remote_device *device,
-       struct scic_sds_request *request);
-
-enum sci_status scic_sds_remote_device_default_continue_request_handler(
-       struct scic_sds_remote_device *device,
-       struct scic_sds_request *request);
-
-enum sci_status scic_sds_remote_device_default_suspend_handler(
-       struct scic_sds_remote_device *sci_dev,
-       u32 suspend_type);
-
-enum sci_status scic_sds_remote_device_default_resume_handler(
-       struct scic_sds_remote_device *sci_dev);
-
-
-enum sci_status scic_sds_remote_device_default_frame_handler(
-       struct scic_sds_remote_device *sci_dev,
-       u32 frame_index);
-
-enum sci_status scic_sds_remote_device_ready_state_stop_handler(
-       struct scic_sds_remote_device *device);
-
-enum sci_status scic_sds_remote_device_ready_state_reset_handler(
-       struct scic_sds_remote_device *device);
-
-enum sci_status scic_sds_remote_device_general_frame_handler(
-       struct scic_sds_remote_device *sci_dev,
-       u32 frame_index);
-
-enum sci_status scic_sds_remote_device_general_event_handler(
-       struct scic_sds_remote_device *sci_dev,
-       u32 event_code);
-
-enum sci_status scic_sds_ssp_remote_device_ready_suspended_substate_resume_handler(
-       struct scic_sds_remote_device *sci_dev);
-
-
-
 #endif /* !defined(_ISCI_REMOTE_DEVICE_H_) */
diff --git a/drivers/scsi/isci/smp_remote_device.c b/drivers/scsi/isci/smp_remote_device.c
deleted file mode 100644 (file)
index 45340a5..0000000
+++ /dev/null
@@ -1,310 +0,0 @@
-/*
- * This file is provided under a dual BSD/GPLv2 license.  When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * BSD LICENSE
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- *   * Redistributions of source code must retain the above copyright
- *     notice, this list of conditions and the following disclaimer.
- *   * Redistributions in binary form must reproduce the above copyright
- *     notice, this list of conditions and the following disclaimer in
- *     the documentation and/or other materials provided with the
- *     distribution.
- *   * Neither the name of Intel Corporation nor the names of its
- *     contributors may be used to endorse or promote products derived
- *     from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include "scic_sds_controller.h"
-#include "scic_sds_port.h"
-#include "remote_device.h"
-#include "scic_sds_request.h"
-#include "sci_environment.h"
-#include "sci_util.h"
-#include "scu_event_codes.h"
-#include "scu_task_context.h"
-
-/*
- * *****************************************************************************
- * *  SMP REMOTE DEVICE READY IDLE SUBSTATE HANDLERS
- * ***************************************************************************** */
-
-/**
- *
- * @[in]: device The device the io is sent to.
- * @[in]: request The io to start.
- *
- * This method will handle the start io operation for a SMP device that is in
- * the idle state. enum sci_status
- */
-static enum sci_status scic_sds_smp_remote_device_ready_idle_substate_start_io_handler(
-       struct scic_sds_remote_device *device,
-       struct scic_sds_request *request)
-{
-       enum sci_status status;
-
-       /* Will the port allow the io request to start? */
-       status = device->owning_port->state_handlers->start_io_handler(
-                       device->owning_port, device, request);
-
-       if (status == SCI_SUCCESS) {
-               status = scic_sds_remote_node_context_start_io(&device->rnc, request);
-
-               if (status == SCI_SUCCESS)
-                       status = scic_sds_request_start(request);
-
-               if (status == SCI_SUCCESS) {
-                       device->working_request = request;
-
-                       sci_base_state_machine_change_state(
-                               &device->ready_substate_machine,
-                               SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD
-                               );
-               }
-
-               scic_sds_remote_device_start_request(device, request, status);
-       }
-
-       return status;
-}
-
-
-/*
- * ******************************************************************************
- * * SMP REMOTE DEVICE READY SUBSTATE CMD HANDLERS
- * ****************************************************************************** */
-/**
- *
- * @device: This is the device object that is receiving the IO.
- * @request: The io to start.
- *
- * This device is already handling a command it can not accept new commands
- * until this one is complete. enum sci_status
- */
-static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_start_io_handler(
-       struct scic_sds_remote_device *device,
-       struct scic_sds_request *request)
-{
-       return SCI_FAILURE_INVALID_STATE;
-}
-
-
-/**
- * this is the complete_io_handler for smp device at ready cmd substate.
- * @device: This is the device object that is receiving the IO.
- * @request: The io to start.
- *
- * enum sci_status
- */
-static enum sci_status
-scic_sds_smp_remote_device_ready_cmd_substate_complete_io_handler(
-       struct scic_sds_remote_device *device,
-       struct scic_sds_request *request)
-{
-       enum sci_status status;
-       struct scic_sds_request *sci_req;
-
-       sci_req = (struct scic_sds_request *)request;
-
-       status = scic_sds_io_request_complete(sci_req);
-
-       if (status == SCI_SUCCESS) {
-               status = scic_sds_port_complete_io(
-                       device->owning_port, device, sci_req);
-
-               if (status == SCI_SUCCESS) {
-                       scic_sds_remote_device_decrement_request_count(device);
-                       sci_base_state_machine_change_state(
-                               &device->ready_substate_machine,
-                               SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE
-                               );
-               } else
-                       dev_err(scirdev_to_dev(device),
-                               "%s: SCIC SDS Remote Device 0x%p io request "
-                               "0x%p could not be completd on the port 0x%p "
-                               "failed with status %d.\n",
-                               __func__,
-                               device,
-                               sci_req,
-                               device->owning_port,
-                               status);
-       }
-
-       return status;
-}
-
-/**
- * This is frame handler for smp device ready cmd substate.
- * @sci_dev: This is the device object that is receiving the frame.
- * @frame_index: The index for the frame received.
- *
- * enum sci_status
- */
-static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_frame_handler(
-       struct scic_sds_remote_device *sci_dev,
-       u32 frame_index)
-{
-       enum sci_status status;
-
-       /*
-        * / The device does not process any UF received from the hardware while
-        * / in this state.  All unsolicited frames are forwarded to the io request
-        * / object. */
-       status = scic_sds_io_request_frame_handler(
-               sci_dev->working_request,
-               frame_index
-               );
-
-       return status;
-}
-
-/* --------------------------------------------------------------------------- */
-
-static const struct scic_sds_remote_device_state_handler scic_sds_smp_remote_device_ready_substate_handler_table[] = {
-       [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = {
-               .start_handler          = scic_sds_remote_device_default_start_handler,
-               .stop_handler           = scic_sds_remote_device_ready_state_stop_handler,
-               .fail_handler           = scic_sds_remote_device_default_fail_handler,
-               .destruct_handler       = scic_sds_remote_device_default_destruct_handler,
-               .reset_handler          = scic_sds_remote_device_default_reset_handler,
-               .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
-               .start_io_handler       = scic_sds_smp_remote_device_ready_idle_substate_start_io_handler,
-               .complete_io_handler    = scic_sds_remote_device_default_complete_request_handler,
-               .continue_io_handler    = scic_sds_remote_device_default_continue_request_handler,
-               .start_task_handler     = scic_sds_remote_device_default_start_request_handler,
-               .complete_task_handler  = scic_sds_remote_device_default_complete_request_handler,
-               .suspend_handler        = scic_sds_remote_device_default_suspend_handler,
-               .resume_handler         = scic_sds_remote_device_default_resume_handler,
-               .event_handler          = scic_sds_remote_device_general_event_handler,
-               .frame_handler          = scic_sds_remote_device_default_frame_handler
-       },
-       [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = {
-               .start_handler          = scic_sds_remote_device_default_start_handler,
-               .stop_handler           = scic_sds_remote_device_ready_state_stop_handler,
-               .fail_handler           = scic_sds_remote_device_default_fail_handler,
-               .destruct_handler       = scic_sds_remote_device_default_destruct_handler,
-               .reset_handler          = scic_sds_remote_device_default_reset_handler,
-               .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
-               .start_io_handler       = scic_sds_smp_remote_device_ready_cmd_substate_start_io_handler,
-               .complete_io_handler    = scic_sds_smp_remote_device_ready_cmd_substate_complete_io_handler,
-               .continue_io_handler    = scic_sds_remote_device_default_continue_request_handler,
-               .start_task_handler     = scic_sds_remote_device_default_start_request_handler,
-               .complete_task_handler  = scic_sds_remote_device_default_complete_request_handler,
-               .suspend_handler        = scic_sds_remote_device_default_suspend_handler,
-               .resume_handler         = scic_sds_remote_device_default_resume_handler,
-               .event_handler          = scic_sds_remote_device_general_event_handler,
-               .frame_handler          = scic_sds_smp_remote_device_ready_cmd_substate_frame_handler
-       }
-};
-
-/**
- *
- * @object: This is the object which is cast into a
- *    struct scic_sds_remote_device.
- *
- * This is the SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE enter method.
- * This function sets the ready cmd substate handlers and reports the device as
- * ready. none
- */
-static void scic_sds_smp_remote_device_ready_idle_substate_enter(void *object)
-{
-       struct scic_sds_remote_device *sci_dev = object;
-       struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev);
-       struct isci_host *ihost = scic->ihost;
-       struct isci_remote_device *idev = sci_dev_to_idev(sci_dev);
-
-       SET_STATE_HANDLER(sci_dev,
-                         scic_sds_smp_remote_device_ready_substate_handler_table,
-                         SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE);
-
-       isci_remote_device_ready(ihost, idev);
-}
-
-/**
- *
- * @object: This is the object which is cast into a
- *    struct scic_sds_remote_device.
- *
- * This is the SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD enter method. This
- * function sets the remote device objects ready cmd substate handlers, and
- * notify core user that the device is not ready. none
- */
-static void scic_sds_smp_remote_device_ready_cmd_substate_enter(void *object)
-{
-       struct scic_sds_remote_device *sci_dev = object;
-       struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev);
-       struct isci_host *ihost = scic->ihost;
-       struct isci_remote_device *idev = sci_dev_to_idev(sci_dev);
-
-       BUG_ON(sci_dev->working_request == NULL);
-
-       SET_STATE_HANDLER(sci_dev,
-                         scic_sds_smp_remote_device_ready_substate_handler_table,
-                         SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD);
-
-       isci_remote_device_not_ready(ihost, idev,
-                                    SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED);
-}
-
-/**
- *
- * @object: This is the object which is cast into a
- *    struct scic_sds_remote_device.
- *
- * This is the SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_CMD exit method. none
- */
-static void scic_sds_smp_remote_device_ready_cmd_substate_exit(void *object)
-{
-       struct scic_sds_remote_device *sci_dev = object;
-       sci_dev->working_request = NULL;
-}
-
-/* --------------------------------------------------------------------------- */
-
-const struct sci_base_state scic_sds_smp_remote_device_ready_substate_table[] = {
-       [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = {
-               .enter_state = scic_sds_smp_remote_device_ready_idle_substate_enter,
-       },
-       [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = {
-               .enter_state = scic_sds_smp_remote_device_ready_cmd_substate_enter,
-               .exit_state  = scic_sds_smp_remote_device_ready_cmd_substate_exit,
-       },
-};
diff --git a/drivers/scsi/isci/stp_remote_device.c b/drivers/scsi/isci/stp_remote_device.c
deleted file mode 100644 (file)
index 1853552..0000000
+++ /dev/null
@@ -1,716 +0,0 @@
-/*
- * This file is provided under a dual BSD/GPLv2 license.  When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * BSD LICENSE
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- *   * Redistributions of source code must retain the above copyright
- *     notice, this list of conditions and the following disclaimer.
- *   * Redistributions in binary form must reproduce the above copyright
- *     notice, this list of conditions and the following disclaimer in
- *     the documentation and/or other materials provided with the
- *     distribution.
- *   * Neither the name of Intel Corporation nor the names of its
- *     contributors may be used to endorse or promote products derived
- *     from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include "intel_ata.h"
-#include "intel_sata.h"
-#include "intel_sat.h"
-#include "sci_base_state.h"
-#include "scic_sds_controller.h"
-#include "scic_sds_port.h"
-#include "remote_device.h"
-#include "scic_sds_request.h"
-#include "sci_environment.h"
-#include "sci_util.h"
-#include "scu_event_codes.h"
-
-/**
- * This method will perform the STP request completion processing common to IO
- *    requests and task requests of all types
- * @device: This parameter specifies the device for which the request is being
- *    completed.
- * @request: This parameter specifies the request being completed.
- *
- * This method returns an indication as to whether the request processing
- * completed successfully.
- */
-static enum sci_status scic_sds_stp_remote_device_complete_request(
-       struct scic_sds_remote_device *device,
-       struct scic_sds_request *request)
-{
-       enum sci_status status;
-
-       status = scic_sds_io_request_complete(request);
-
-       if (status == SCI_SUCCESS) {
-               status = scic_sds_port_complete_io(
-                       device->owning_port, device, request);
-
-               if (status == SCI_SUCCESS) {
-                       scic_sds_remote_device_decrement_request_count(device);
-                       if (request->sci_status == SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) {
-                               /*
-                                * This request causes hardware error, device needs to be Lun Reset.
-                                * So here we force the state machine to IDLE state so the rest IOs
-                                * can reach RNC state handler, these IOs will be completed by RNC with
-                                * status of "DEVICE_RESET_REQUIRED", instead of "INVALID STATE". */
-                               sci_base_state_machine_change_state(
-                                       &device->ready_substate_machine,
-                                       SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET
-                                       );
-                       } else if (scic_sds_remote_device_get_request_count(device) == 0) {
-                               sci_base_state_machine_change_state(
-                                       &device->ready_substate_machine,
-                                       SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE
-                                       );
-                       }
-               }
-       }
-
-       if (status != SCI_SUCCESS)
-               dev_err(scirdev_to_dev(device),
-                       "%s: Port:0x%p Device:0x%p Request:0x%p Status:0x%x "
-                       "could not complete\n",
-                       __func__,
-                       device->owning_port,
-                       device,
-                       request,
-                       status);
-
-       return status;
-}
-
-/*
- * *****************************************************************************
- * *  STP REMOTE DEVICE READY COMMON SUBSTATE HANDLERS
- * ***************************************************************************** */
-
-/**
- * This is the READY NCQ substate handler to start task management request. In
- *    this routine, we suspend and resume the RNC.
- * @device: The target device a task management request towards to.
- * @request: The task request.
- *
- * enum sci_status Always return SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS status to
- * let controller_start_task_handler know that the controller can't post TC for
- * task request yet, instead, when RNC gets resumed, a controller_continue_task
- * callback will be called.
- */
-static enum sci_status scic_sds_stp_remote_device_ready_substate_start_request_handler(
-       struct scic_sds_remote_device *device,
-       struct scic_sds_request *request)
-{
-       enum sci_status status;
-
-       /* Will the port allow the io request to start? */
-       status = device->owning_port->state_handlers->start_io_handler(
-               device->owning_port, device, request);
-       if (status != SCI_SUCCESS)
-               return status;
-
-       status = scic_sds_remote_node_context_start_task(&device->rnc, request);
-       if (status != SCI_SUCCESS)
-               goto out;
-
-       status = request->state_handlers->start_handler(request);
-       if (status != SCI_SUCCESS)
-               goto out;
-
-       /*
-        * Note: If the remote device state is not IDLE this will replace
-        * the request that probably resulted in the task management request.
-        */
-       device->working_request = request;
-       sci_base_state_machine_change_state(&device->ready_substate_machine,
-                       SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD);
-
-       /*
-        * The remote node context must cleanup the TCi to NCQ mapping table.
-        * The only way to do this correctly is to either write to the TLCR
-        * register or to invalidate and repost the RNC. In either case the
-        * remote node context state machine will take the correct action when
-        * the remote node context is suspended and later resumed.
-        */
-       scic_sds_remote_node_context_suspend(&device->rnc,
-                       SCI_SOFTWARE_SUSPENSION, NULL, NULL);
-       scic_sds_remote_node_context_resume(&device->rnc,
-                       scic_sds_remote_device_continue_request,
-                       device);
-
-out:
-       scic_sds_remote_device_start_request(device, request, status);
-       /*
-        * We need to let the controller start request handler know that it can't
-        * post TC yet. We will provide a callback function to post TC when RNC gets
-        * resumed.
-        */
-       return SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS;
-}
-
-/*
- * *****************************************************************************
- * *  STP REMOTE DEVICE READY IDLE SUBSTATE HANDLERS
- * ***************************************************************************** */
-
-/**
- * This method will handle the start io operation for a sata device that is in
- *    the command idle state. - Evalute the type of IO request to be started -
- *    If its an NCQ request change to NCQ substate - If its any other command
- *    change to the CMD substate
- * @device:
- * @request:
- *
- * If this is a softreset we may want to have a different substate.
- * enum sci_status
- */
-static enum sci_status scic_sds_stp_remote_device_ready_idle_substate_start_io_handler(
-       struct scic_sds_remote_device *sci_dev,
-       struct scic_sds_request *request)
-{
-       enum sci_status status;
-       struct isci_request *isci_request = request->ireq;
-
-
-       /* Will the port allow the io request to start? */
-       status = sci_dev->owning_port->state_handlers->start_io_handler(
-                       sci_dev->owning_port, sci_dev, request);
-       if (status != SCI_SUCCESS)
-               return status;
-
-       status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, request);
-       if (status != SCI_SUCCESS)
-               goto out;
-
-       status = request->state_handlers->start_handler(request);
-       if (status != SCI_SUCCESS)
-               goto out;
-
-       if (isci_sata_get_sat_protocol(isci_request) == SAT_PROTOCOL_FPDMA) {
-               sci_base_state_machine_change_state(&sci_dev->ready_substate_machine,
-                               SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ);
-       } else {
-               sci_dev->working_request = request;
-               sci_base_state_machine_change_state(&sci_dev->ready_substate_machine,
-                               SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD);
-       }
-out:
-       scic_sds_remote_device_start_request(sci_dev, request, status);
-       return status;
-}
-
-
-/**
- *
- * @[in]: device The device received event.
- * @[in]: event_code The event code.
- *
- * This method will handle the event for a sata device that is in the idle
- * state. We pick up suspension events to handle specifically to this state. We
- * resume the RNC right away. enum sci_status
- */
-static enum sci_status scic_sds_stp_remote_device_ready_idle_substate_event_handler(
-       struct scic_sds_remote_device *sci_dev,
-       u32 event_code)
-{
-       enum sci_status status;
-
-       status = scic_sds_remote_device_general_event_handler(sci_dev, event_code);
-
-       if (status == SCI_SUCCESS) {
-               if (scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX
-                   || scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX) {
-                       status = scic_sds_remote_node_context_resume(
-                               &sci_dev->rnc, NULL, NULL);
-               }
-       }
-
-       return status;
-}
-
-
-/*
- * *****************************************************************************
- * *  STP REMOTE DEVICE READY NCQ SUBSTATE HANDLERS
- * ***************************************************************************** */
-
-static enum sci_status scic_sds_stp_remote_device_ready_ncq_substate_start_io_handler(
-       struct scic_sds_remote_device *sci_dev,
-       struct scic_sds_request *request)
-{
-       enum sci_status status;
-       struct isci_request *isci_request = request->ireq;
-
-       if (isci_sata_get_sat_protocol(isci_request) == SAT_PROTOCOL_FPDMA) {
-               status = sci_dev->owning_port->state_handlers->start_io_handler(
-                               sci_dev->owning_port,
-                               sci_dev,
-                               request);
-               if (status != SCI_SUCCESS)
-                       return status;
-
-               status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, request);
-               if (status != SCI_SUCCESS)
-                       return status;
-
-               status = request->state_handlers->start_handler(request);
-
-               scic_sds_remote_device_start_request(sci_dev, request, status);
-       } else
-               status = SCI_FAILURE_INVALID_STATE;
-
-       return status;
-}
-
-
-/**
- * This method will handle events received while the STP device is in the ready
- *    command substate.
- * @sci_dev: This is the device object that is receiving the event.
- * @event_code: The event code to process.
- *
- * enum sci_status
- */
-
-static enum sci_status scic_sds_stp_remote_device_ready_ncq_substate_frame_handler(
-       struct scic_sds_remote_device *sci_dev,
-       u32 frame_index)
-{
-       enum sci_status status;
-       struct sata_fis_header *frame_header;
-
-       status = scic_sds_unsolicited_frame_control_get_header(
-               &(scic_sds_remote_device_get_controller(sci_dev)->uf_control),
-               frame_index,
-               (void **)&frame_header
-               );
-
-       if (status == SCI_SUCCESS) {
-               if (frame_header->fis_type == SATA_FIS_TYPE_SETDEVBITS &&
-                   (frame_header->status & ATA_STATUS_REG_ERROR_BIT)) {
-                       sci_dev->not_ready_reason =
-                               SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED;
-
-                       /*
-                        * / @todo Check sactive and complete associated IO
-                        * if any.
-                        */
-
-                       sci_base_state_machine_change_state(
-                               &sci_dev->ready_substate_machine,
-                               SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR
-                               );
-               } else if (frame_header->fis_type == SATA_FIS_TYPE_REGD2H &&
-                          (frame_header->status & ATA_STATUS_REG_ERROR_BIT)) {
-
-                       /*
-                        * Some devices return D2H FIS when an NCQ error is detected.
-                        * Treat this like an SDB error FIS ready reason.
-                        */
-                       sci_dev->not_ready_reason =
-                               SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED;
-
-                       sci_base_state_machine_change_state(
-                               &sci_dev->ready_substate_machine,
-                               SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR
-                               );
-               } else {
-                       status = SCI_FAILURE;
-               }
-
-               scic_sds_controller_release_frame(
-                       scic_sds_remote_device_get_controller(sci_dev), frame_index
-                       );
-       }
-
-       return status;
-}
-
-/*
- * *****************************************************************************
- * *  STP REMOTE DEVICE READY CMD SUBSTATE HANDLERS
- * ***************************************************************************** */
-
-/**
- * This device is already handling a command it can not accept new commands
- *    until this one is complete.
- * @device:
- * @request:
- *
- * enum sci_status
- */
-static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_start_io_handler(
-       struct scic_sds_remote_device *device,
-       struct scic_sds_request *request)
-{
-       return SCI_FAILURE_INVALID_STATE;
-}
-
-static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_suspend_handler(
-       struct scic_sds_remote_device *sci_dev,
-       u32 suspend_type)
-{
-       enum sci_status status;
-
-       status = scic_sds_remote_node_context_suspend(&sci_dev->rnc,
-                                                     suspend_type, NULL, NULL);
-
-       return status;
-}
-
-static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_frame_handler(
-       struct scic_sds_remote_device *sci_dev,
-       u32 frame_index)
-{
-       enum sci_status status;
-
-       /*
-        * / The device doe not process any UF received from the hardware while
-        * / in this state.  All unsolicited frames are forwarded to the io request
-        * / object. */
-       status = scic_sds_io_request_frame_handler(
-               sci_dev->working_request,
-               frame_index
-               );
-
-       return status;
-}
-
-
-/*
- * *****************************************************************************
- * *  STP REMOTE DEVICE READY NCQ SUBSTATE HANDLERS
- * ***************************************************************************** */
-
-/*
- * *****************************************************************************
- * *  STP REMOTE DEVICE READY NCQ ERROR SUBSTATE HANDLERS
- * ***************************************************************************** */
-
-/*
- * *****************************************************************************
- * *  STP REMOTE DEVICE READY AWAIT RESET SUBSTATE HANDLERS
- * ***************************************************************************** */
-static enum sci_status scic_sds_stp_remote_device_ready_await_reset_substate_start_io_handler(
-       struct scic_sds_remote_device *device,
-       struct scic_sds_request *request)
-{
-       return SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED;
-}
-
-
-
-/**
- * This method will perform the STP request (both io or task) completion
- *    processing for await reset state.
- * @device: This parameter specifies the device for which the request is being
- *    completed.
- * @request: This parameter specifies the request being completed.
- *
- * This method returns an indication as to whether the request processing
- * completed successfully.
- */
-static enum sci_status scic_sds_stp_remote_device_ready_await_reset_substate_complete_request_handler(
-       struct scic_sds_remote_device *device,
-       struct scic_sds_request *request)
-{
-       struct scic_sds_request *sci_req = (struct scic_sds_request *)request;
-       enum sci_status status;
-
-       status = scic_sds_io_request_complete(sci_req);
-
-       if (status == SCI_SUCCESS) {
-               status = scic_sds_port_complete_io(
-                       device->owning_port, device, sci_req
-                       );
-
-               if (status == SCI_SUCCESS)
-                       scic_sds_remote_device_decrement_request_count(device);
-       }
-
-       if (status != SCI_SUCCESS)
-               dev_err(scirdev_to_dev(device),
-                       "%s: Port:0x%p Device:0x%p Request:0x%p Status:0x%x "
-                       "could not complete\n",
-                       __func__,
-                       device->owning_port,
-                       device,
-                       sci_req,
-                       status);
-
-       return status;
-}
-
-static const struct scic_sds_remote_device_state_handler scic_sds_stp_remote_device_ready_substate_handler_table[] = {
-       [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = {
-               .start_handler          = scic_sds_remote_device_default_start_handler,
-               .stop_handler           = scic_sds_remote_device_ready_state_stop_handler,
-               .fail_handler           = scic_sds_remote_device_default_fail_handler,
-               .destruct_handler       = scic_sds_remote_device_default_destruct_handler,
-               .reset_handler          = scic_sds_remote_device_ready_state_reset_handler,
-               .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
-               .start_io_handler       = scic_sds_stp_remote_device_ready_idle_substate_start_io_handler,
-               .complete_io_handler    = scic_sds_remote_device_default_complete_request_handler,
-               .continue_io_handler    = scic_sds_remote_device_default_continue_request_handler,
-               .start_task_handler     = scic_sds_stp_remote_device_ready_substate_start_request_handler,
-               .complete_task_handler  = scic_sds_remote_device_default_complete_request_handler,
-               .suspend_handler                = scic_sds_remote_device_default_suspend_handler,
-               .resume_handler                 = scic_sds_remote_device_default_resume_handler,
-               .event_handler                  = scic_sds_stp_remote_device_ready_idle_substate_event_handler,
-               .frame_handler                  = scic_sds_remote_device_default_frame_handler
-       },
-       [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = {
-               .start_handler          = scic_sds_remote_device_default_start_handler,
-               .stop_handler           = scic_sds_remote_device_ready_state_stop_handler,
-               .fail_handler           = scic_sds_remote_device_default_fail_handler,
-               .destruct_handler       = scic_sds_remote_device_default_destruct_handler,
-               .reset_handler          = scic_sds_remote_device_ready_state_reset_handler,
-               .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
-               .start_io_handler       = scic_sds_stp_remote_device_ready_cmd_substate_start_io_handler,
-               .complete_io_handler    = scic_sds_stp_remote_device_complete_request,
-               .continue_io_handler    = scic_sds_remote_device_default_continue_request_handler,
-               .start_task_handler     = scic_sds_stp_remote_device_ready_substate_start_request_handler,
-               .complete_task_handler  = scic_sds_stp_remote_device_complete_request,
-               .suspend_handler                = scic_sds_stp_remote_device_ready_cmd_substate_suspend_handler,
-               .resume_handler                 = scic_sds_remote_device_default_resume_handler,
-               .event_handler                  = scic_sds_remote_device_general_event_handler,
-               .frame_handler                  = scic_sds_stp_remote_device_ready_cmd_substate_frame_handler
-       },
-       [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ] = {
-               .start_handler          = scic_sds_remote_device_default_start_handler,
-               .stop_handler           = scic_sds_remote_device_ready_state_stop_handler,
-               .fail_handler           = scic_sds_remote_device_default_fail_handler,
-               .destruct_handler       = scic_sds_remote_device_default_destruct_handler,
-               .reset_handler          = scic_sds_remote_device_ready_state_reset_handler,
-               .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
-               .start_io_handler       = scic_sds_stp_remote_device_ready_ncq_substate_start_io_handler,
-               .complete_io_handler    = scic_sds_stp_remote_device_complete_request,
-               .continue_io_handler    = scic_sds_remote_device_default_continue_request_handler,
-               .start_task_handler     = scic_sds_stp_remote_device_ready_substate_start_request_handler,
-               .complete_task_handler  = scic_sds_stp_remote_device_complete_request,
-               .suspend_handler                = scic_sds_remote_device_default_suspend_handler,
-               .resume_handler                 = scic_sds_remote_device_default_resume_handler,
-               .event_handler                  = scic_sds_remote_device_general_event_handler,
-               .frame_handler                  = scic_sds_stp_remote_device_ready_ncq_substate_frame_handler
-       },
-       [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR] = {
-               .start_handler          = scic_sds_remote_device_default_start_handler,
-               .stop_handler           = scic_sds_remote_device_ready_state_stop_handler,
-               .fail_handler           = scic_sds_remote_device_default_fail_handler,
-               .destruct_handler       = scic_sds_remote_device_default_destruct_handler,
-               .reset_handler          = scic_sds_remote_device_ready_state_reset_handler,
-               .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
-               .start_io_handler       = scic_sds_remote_device_default_start_request_handler,
-               .complete_io_handler    = scic_sds_stp_remote_device_complete_request,
-               .continue_io_handler    = scic_sds_remote_device_default_continue_request_handler,
-               .start_task_handler     = scic_sds_stp_remote_device_ready_substate_start_request_handler,
-               .complete_task_handler  = scic_sds_stp_remote_device_complete_request,
-               .suspend_handler                = scic_sds_remote_device_default_suspend_handler,
-               .resume_handler                 = scic_sds_remote_device_default_resume_handler,
-               .event_handler                  = scic_sds_remote_device_general_event_handler,
-               .frame_handler                  = scic_sds_remote_device_general_frame_handler
-       },
-       [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET] = {
-               .start_handler          = scic_sds_remote_device_default_start_handler,
-               .stop_handler           = scic_sds_remote_device_ready_state_stop_handler,
-               .fail_handler           = scic_sds_remote_device_default_fail_handler,
-               .destruct_handler       = scic_sds_remote_device_default_destruct_handler,
-               .reset_handler          = scic_sds_remote_device_ready_state_reset_handler,
-               .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
-               .start_io_handler       = scic_sds_stp_remote_device_ready_await_reset_substate_start_io_handler,
-               .complete_io_handler    = scic_sds_stp_remote_device_ready_await_reset_substate_complete_request_handler,
-               .continue_io_handler    = scic_sds_remote_device_default_continue_request_handler,
-               .start_task_handler     = scic_sds_stp_remote_device_ready_substate_start_request_handler,
-               .complete_task_handler  = scic_sds_stp_remote_device_complete_request,
-               .suspend_handler                = scic_sds_remote_device_default_suspend_handler,
-               .resume_handler                 = scic_sds_remote_device_default_resume_handler,
-               .event_handler                  = scic_sds_remote_device_general_event_handler,
-               .frame_handler                  = scic_sds_remote_device_general_frame_handler
-       }
-};
-
-/*
- * *****************************************************************************
- * *  STP REMOTE DEVICE READY SUBSTATE PRIVATE METHODS
- * ***************************************************************************** */
-
-static void
-scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler(void *user_cookie)
-{
-       struct scic_sds_remote_device *sci_dev = user_cookie;
-       struct isci_remote_device *idev = sci_dev_to_idev(sci_dev);
-       struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev);
-       struct isci_host *ihost = scic->ihost;
-
-       /*
-        * For NCQ operation we do not issue a
-        * scic_cb_remote_device_not_ready().  As a result, avoid sending
-        * the ready notification.
-        */
-       if (sci_dev->ready_substate_machine.previous_state_id !=
-                       SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ)
-               isci_remote_device_ready(ihost, idev);
-}
-
-/*
- * *****************************************************************************
- * *  STP REMOTE DEVICE READY IDLE SUBSTATE
- * ***************************************************************************** */
-
-/**
- *
- * @device: This is the object which is cast into a
- *    struct scic_sds_remote_device object.
- *
- */
-static void scic_sds_stp_remote_device_ready_idle_substate_enter(void *device)
-{
-       struct scic_sds_remote_device *sci_dev = device;
-
-       SET_STATE_HANDLER(
-               sci_dev,
-               scic_sds_stp_remote_device_ready_substate_handler_table,
-               SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE
-               );
-
-       sci_dev->working_request = NULL;
-
-       if (scic_sds_remote_node_context_is_ready(&sci_dev->rnc)) {
-               /*
-                * Since the RNC is ready, it's alright to finish completion
-                * processing (e.g. signal the remote device is ready). */
-               scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler(
-                       sci_dev
-                       );
-       } else {
-               scic_sds_remote_node_context_resume(
-                       &sci_dev->rnc,
-                       scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler,
-                       sci_dev);
-       }
-}
-
-static void scic_sds_stp_remote_device_ready_cmd_substate_enter(void *object)
-{
-       struct scic_sds_remote_device *sci_dev = object;
-       struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev);
-       struct isci_host *ihost = scic->ihost;
-       struct isci_remote_device *idev = sci_dev_to_idev(sci_dev);
-
-       BUG_ON(sci_dev->working_request == NULL);
-
-       SET_STATE_HANDLER(sci_dev,
-                         scic_sds_stp_remote_device_ready_substate_handler_table,
-                         SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD);
-
-       isci_remote_device_not_ready(ihost, idev,
-                                    SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED);
-}
-
-static void scic_sds_stp_remote_device_ready_ncq_substate_enter(void *object)
-{
-       struct scic_sds_remote_device *sci_dev = object;
-       SET_STATE_HANDLER(sci_dev,
-                         scic_sds_stp_remote_device_ready_substate_handler_table,
-                         SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ);
-}
-
-static void scic_sds_stp_remote_device_ready_ncq_error_substate_enter(
-               void *object)
-{
-       struct scic_sds_remote_device *sci_dev = object;
-       struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev);
-       struct isci_host *ihost = scic->ihost;
-       struct isci_remote_device *idev = sci_dev_to_idev(sci_dev);
-
-       SET_STATE_HANDLER(sci_dev,
-                         scic_sds_stp_remote_device_ready_substate_handler_table,
-                         SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR);
-
-       if (sci_dev->not_ready_reason ==
-               SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED)
-               isci_remote_device_not_ready(ihost, idev, sci_dev->not_ready_reason);
-}
-
-/*
- * *****************************************************************************
- * *  STP REMOTE DEVICE READY AWAIT RESET SUBSTATE
- * ***************************************************************************** */
-
-/**
- * The enter routine to READY AWAIT RESET substate.
- * @device: This is the object which is cast into a
- *    struct scic_sds_remote_device object.
- *
- */
-static void scic_sds_stp_remote_device_ready_await_reset_substate_enter(
-       void *device)
-{
-       struct scic_sds_remote_device *sci_dev;
-
-       sci_dev = (struct scic_sds_remote_device *)device;
-
-       SET_STATE_HANDLER(
-               sci_dev,
-               scic_sds_stp_remote_device_ready_substate_handler_table,
-               SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET
-               );
-}
-
-const struct sci_base_state scic_sds_stp_remote_device_ready_substate_table[] = {
-       [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = {
-               .enter_state = scic_sds_stp_remote_device_ready_idle_substate_enter,
-       },
-       [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = {
-               .enter_state = scic_sds_stp_remote_device_ready_cmd_substate_enter,
-       },
-       [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ] = {
-               .enter_state = scic_sds_stp_remote_device_ready_ncq_substate_enter,
-       },
-       [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR] = {
-               .enter_state = scic_sds_stp_remote_device_ready_ncq_error_substate_enter,
-       },
-       [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET] = {
-               .enter_state = scic_sds_stp_remote_device_ready_await_reset_substate_enter,
-       },
-};