ARM: dts: UX500: name the GPIO lines on HREFv60plus

Using the new line naming mechanism from the GPIO subsystem, name
the GPIO lines on the HREFv60plus board that are connected as
GPIO on this design.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
index 45d7af3267185cd6c34b250086ecccbecd2dc1f8..7187676836beb4c5eede62b9fe9c8fa0ad9f2c8b 100644 (file)
--- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi
+++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
@@ -18,6 +18,126 @@
        compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
 
        soc {
+               /* Name the GPIO muxed rails on the HREF boards */
+               gpio@8012e000 {
+                       /* GPIOs 0 - 31 */
+                       gpio-line-names =
+                                    /* GPIO0,1 used for UART0 BT RX/TX */
+                                    "", "",
+                                    "UART_WAKE",
+                                    "BT_WAKE",
+                                    "",
+                                    "SDMMC_1V8_3V_SEL",
+                                    "FLASH_LED_SYNC (FLASH_CTRL_0)",
+                                    "XENON_READY (FLASH_CTRL_1)",
+                                    "", "", "", "", "", "", "", "",
+                                    "", "", "", "",
+                                    "",
+                                    "FLASH_LED_EN (FLASH_CTRL_3)",
+                                    "", "",
+                                    "", "", "", "", "",
+                                    /* Used by UART2 (console) */
+                                    "", "",
+                                    "MAGNETOMETER_INT";
+               };
+
+               gpio@8012e080 {
+                       /* GPIOs 32 - 63 */
+                       gpio-line-names =
+                                    "MAGNETOMETER_DRDY",
+                                    "", "", "", "", "", "", "",
+                                    "", "", "", "", "", "", "", "",
+                                    "", "", "", "", "", "", "", "",
+                                    "", "", "", "", "", "", "", "";
+               };
+
+               gpio@8000e000 {
+                       /* GPIOs 64 - 95 */
+                       gpio-line-names = "XENON_EN2 (FLASH_CTRL_4)",
+                                    "DISP1_RST",
+                                    "DISP2_RST",
+                                    "TOUCH_INT2",
+                                    "LCD_VSI0_A",
+                                    "LCD_VSI1_A",
+                                    /* GPIO 70-77 used for ETM */
+                                    "", "", "", "", "", "", "", "",
+                                    /* GPIO 78-81 used for YCBCR */
+                                    "", "", "", "",
+                                    "ACCELEROMETER_INT1_RDY",
+                                    "ACCELEROMETER_INT2",
+                                    "TOUCH_INT",
+                                    "WLAN_ENA",
+                                    "", "", "", "", "",
+                                    "FORCE_SENSING_INT",
+                                    "FORCE_SENSING_RESET",
+                                    "", "",
+                                    "SDMMC_CD";
+               };
+
+               gpio@8000e080 {
+                       /* GPIOs 96 - 127 */
+                       gpio-line-names = "",
+                                    "FORCE_SENSING_WU",
+                                    "", "", "", "", "", "",
+                                    "", "", "", "", "", "", "", "",
+                                    "", "", "", "", "", "", "", "",
+                                    "", "", "", "", "", "", "", "";
+               };
+
+               gpio@8000e100 {
+                       /* GPIOs 128 - 159 */
+                       gpio-line-names = "", "", "", "", "", "", "", "",
+                                    "", "", "",
+                                    "DIPRO_INT", /* GPIO139 */
+                                    "XSHUTDOWN_SECONDARY_SENSOR",
+                                    "XSHUTDOWN_PRIMARY_SENSOR",
+                                    "NFC_RST (NFC_CTRL_",
+                                    "TOUCH_RST",
+                                    "NFC_IRQ (NFC_CTRL_1)",
+                                    "HAL_SW",
+                                    "TOUCH_RST2",
+                                    "", "",
+                                    "VAUDIO_HF_EN", /* GPIO149 */
+                                    "", "", "", "", "", "", "", "", "", "";
+               };
+
+               gpio@8000e180 {
+                       /* GPIOs 160 - 191 */
+                       gpio-line-names = "", "", "", "", "", "", "", "",
+                                    "",
+                                    "SDMMC_EN",
+                                    "XENON_CHARGE (FLASH_CONTROL_5)",
+                                    "GBF_ENA_RESET",
+                                    "", "", "", "",
+                                    "", "", "", "", "", "", "", "",
+                                    "", "", "", "", "", "", "", "";
+               };
+
+               gpio@8011e000 {
+                       /* GPIOs 192 - 223 */
+                       gpio-line-names = "HDTV_INTN",
+                                    "", "", "",
+                                    "HDTV_RSTN",
+                                    "", "", "",
+                                    "", /* GPIO200 */
+                                    "", "", "", "", "", "", "",
+                                    /* GPIO208-216 used for WGBF_MC1 */
+                                    "", "", "", "", "", "", "", "", "",
+                                    "SW_FRONT_PROXIMITY", /* GPIO217 */
+                                    "KPD_CTRL_INT", /* Keypad controller */
+                                    "", "", "", "", "";
+               };
+
+               gpio@8011e080 {
+                       /* GPIOs 224 - 255 */
+                       gpio-line-names = "", "",
+                                    "HSIT_ACWAKE0",
+                                    "", "", "", "", "",
+                                    "", "", "", "", "", "", "", "",
+                                    "", "", "", "", "", "", "", "",
+                                    "", "", "", "", "", "", "", "";
+               };
+
                // External Micro SD slot
                sdi0_per1@80126000 {
                        cd-gpios  = <&gpio2 31 GPIO_ACTIVE_HIGH>; // 95