usb: Don't enable LPM if the exit latency is zero.

Some USB 3.0 devices signal that they don't implement Link PM by having
all zeroes in the U1/U2 exit latencies in their SuperSpeed BOS
descriptor.  Don found that a Western Digital device he has experiences
transfer errors when LPM is enabled.  The lsusb shows the U1/U2 exit
latencies are set to zero:

Binary Object Store Descriptor:
  bLength                 5
  bDescriptorType        15
  wTotalLength           22
  bNumDeviceCaps          2
  SuperSpeed USB Device Capability:
    bLength                10
    bDescriptorType        16
    bDevCapabilityType      3
    bmAttributes         0x00
      Latency Tolerance Messages (LTM) Supported
    wSpeedsSupported   0x000e
      Device can operate at Full Speed (12Mbps)
      Device can operate at High Speed (480Mbps)
      Device can operate at SuperSpeed (5Gbps)
    bFunctionalitySupport   1
      Lowest fully-functional device speed is Full Speed (12Mbps)
    bU1DevExitLat           0 micro seconds
    bU2DevExitLat           0 micro seconds

The fix is to not enable LPM for a particular link state if we find its
corresponding exit latency is zero.

This patch should be backported to kernels as old as 3.5, that contain
the commit 1ea7e0e8e3d0f50901d335ea4178ab2aa8c88201 "USB: Add support to
enable/disable USB3 link states."

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: Don Zickus <dzickus@redhat.com>
Tested-by: Don Zickus <dzickus@redhat.com>
Cc: stable@vger.kernel.org

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 673ee46962621e8013b102f2876c918bfa1d56f0..8f0478709323997f6e519158c2eb66ce9f274482 100644 (file)
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -3415,6 +3415,16 @@ static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev,
                enum usb3_link_state state)
 {
        int timeout;
+       __u8 u1_mel = udev->bos->ss_cap->bU1devExitLat;
+       __le16 u2_mel = udev->bos->ss_cap->bU2DevExitLat;
+
+       /* If the device says it doesn't have *any* exit latency to come out of
+        * U1 or U2, it's probably lying.  Assume it doesn't implement that link
+        * state.
+        */
+       if ((state == USB3_LPM_U1 && u1_mel == 0) ||
+                       (state == USB3_LPM_U2 && u2_mel == 0))
+               return;
 
        /* We allow the host controller to set the U1/U2 timeout internally
         * first, so that it can change its schedule to account for the