if (status & SCHED_INTR)
sched = true;
+#ifdef CONFIG_PM_SLEEP
+ if (status & ATH9K_INT_BMISS) {
+ if (atomic_read(&sc->wow_sleep_proc_intr) == 0) {
+ ath_dbg(common, ANY, "during WoW we got a BMISS\n");
+ atomic_inc(&sc->wow_got_bmiss_intr);
+ atomic_dec(&sc->wow_sleep_proc_intr);
+ }
+ ath_dbg(common, INTERRUPT, "beacon miss interrupt\n");
+ }
+#endif
+
/*
* If a FATAL or RXORN interrupt is received, we have to reset the
* chip immediately.
#endif
+#ifdef CONFIG_PM_SLEEP
+
+static void ath9k_wow_map_triggers(struct ath_softc *sc,
+ struct cfg80211_wowlan *wowlan,
+ u32 *wow_triggers)
+{
+ if (wowlan->disconnect)
+ *wow_triggers |= AH_WOW_LINK_CHANGE |
+ AH_WOW_BEACON_MISS;
+ if (wowlan->magic_pkt)
+ *wow_triggers |= AH_WOW_MAGIC_PATTERN_EN;
+
+ if (wowlan->n_patterns)
+ *wow_triggers |= AH_WOW_USER_PATTERN_EN;
+
+ sc->wow_enabled = *wow_triggers;
+
+}
+
+static void ath9k_wow_add_disassoc_deauth_pattern(struct ath_softc *sc)
+{
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_hw_capabilities *pcaps = &ah->caps;
+ int pattern_count = 0;
+ int i, byte_cnt;
+ u8 dis_deauth_pattern[MAX_PATTERN_SIZE];
+ u8 dis_deauth_mask[MAX_PATTERN_SIZE];
+
+ memset(dis_deauth_pattern, 0, MAX_PATTERN_SIZE);
+ memset(dis_deauth_mask, 0, MAX_PATTERN_SIZE);
+
+ /*
+ * Create Dissassociate / Deauthenticate packet filter
+ *
+ * 2 bytes 2 byte 6 bytes 6 bytes 6 bytes
+ * +--------------+----------+---------+--------+--------+----
+ * + Frame Control+ Duration + DA + SA + BSSID +
+ * +--------------+----------+---------+--------+--------+----
+ *
+ * The above is the management frame format for disassociate/
+ * deauthenticate pattern, from this we need to match the first byte
+ * of 'Frame Control' and DA, SA, and BSSID fields
+ * (skipping 2nd byte of FC and Duration feild.
+ *
+ * Disassociate pattern
+ * --------------------
+ * Frame control = 00 00 1010
+ * DA, SA, BSSID = x:x:x:x:x:x
+ * Pattern will be A0000000 | x:x:x:x:x:x | x:x:x:x:x:x
+ * | x:x:x:x:x:x -- 22 bytes
+ *
+ * Deauthenticate pattern
+ * ----------------------
+ * Frame control = 00 00 1100
+ * DA, SA, BSSID = x:x:x:x:x:x
+ * Pattern will be C0000000 | x:x:x:x:x:x | x:x:x:x:x:x
+ * | x:x:x:x:x:x -- 22 bytes
+ */
+
+ /* Create Disassociate Pattern first */
+
+ byte_cnt = 0;
+
+ /* Fill out the mask with all FF's */
+
+ for (i = 0; i < MAX_PATTERN_MASK_SIZE; i++)
+ dis_deauth_mask[i] = 0xff;
+
+ /* copy the first byte of frame control field */
+ dis_deauth_pattern[byte_cnt] = 0xa0;
+ byte_cnt++;
+
+ /* skip 2nd byte of frame control and Duration field */
+ byte_cnt += 3;
+
+ /*
+ * need not match the destination mac address, it can be a broadcast
+ * mac address or an unicast to this station
+ */
+ byte_cnt += 6;
+
+ /* copy the source mac address */
+ memcpy((dis_deauth_pattern + byte_cnt), common->curbssid, ETH_ALEN);
+
+ byte_cnt += 6;
+
+ /* copy the bssid, its same as the source mac address */
+
+ memcpy((dis_deauth_pattern + byte_cnt), common->curbssid, ETH_ALEN);
+
+ /* Create Disassociate pattern mask */
+
+ if (pcaps->hw_caps & ATH9K_HW_WOW_PATTERN_MATCH_EXACT) {
+
+ if (pcaps->hw_caps & ATH9K_HW_WOW_PATTERN_MATCH_DWORD) {
+ /*
+ * for AR9280, because of hardware limitation, the
+ * first 4 bytes have to be matched for all patterns.
+ * the mask for disassociation and de-auth pattern
+ * matching need to enable the first 4 bytes.
+ * also the duration field needs to be filled.
+ */
+ dis_deauth_mask[0] = 0xf0;
+
+ /*
+ * fill in duration field
+ FIXME: what is the exact value ?
+ */
+ dis_deauth_pattern[2] = 0xff;
+ dis_deauth_pattern[3] = 0xff;
+ } else {
+ dis_deauth_mask[0] = 0xfe;
+ }
+
+ dis_deauth_mask[1] = 0x03;
+ dis_deauth_mask[2] = 0xc0;
+ } else {
+ dis_deauth_mask[0] = 0xef;
+ dis_deauth_mask[1] = 0x3f;
+ dis_deauth_mask[2] = 0x00;
+ dis_deauth_mask[3] = 0xfc;
+ }
+
+ ath_dbg(common, WOW, "Adding disassoc/deauth patterns for WoW\n");
+
+ ath9k_hw_wow_apply_pattern(ah, dis_deauth_pattern, dis_deauth_mask,
+ pattern_count, byte_cnt);
+
+ pattern_count++;
+ /*
+ * for de-authenticate pattern, only the first byte of the frame
+ * control field gets changed from 0xA0 to 0xC0
+ */
+ dis_deauth_pattern[0] = 0xC0;
+
+ ath9k_hw_wow_apply_pattern(ah, dis_deauth_pattern, dis_deauth_mask,
+ pattern_count, byte_cnt);
+
+}
+
+static void ath9k_wow_add_pattern(struct ath_softc *sc,
+ struct cfg80211_wowlan *wowlan)
+{
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath9k_wow_pattern *wow_pattern = NULL;
+ struct cfg80211_wowlan_trig_pkt_pattern *patterns = wowlan->patterns;
+ int mask_len;
+ s8 i = 0;
+
+ if (!wowlan->n_patterns)
+ return;
+
+ /*
+ * Add the new user configured patterns
+ */
+ for (i = 0; i < wowlan->n_patterns; i++) {
+
+ wow_pattern = kzalloc(sizeof(*wow_pattern), GFP_KERNEL);
+
+ if (!wow_pattern)
+ return;
+
+ /*
+ * TODO: convert the generic user space pattern to
+ * appropriate chip specific/802.11 pattern.
+ */
+
+ mask_len = DIV_ROUND_UP(wowlan->patterns[i].pattern_len, 8);
+ memset(wow_pattern->pattern_bytes, 0, MAX_PATTERN_SIZE);
+ memset(wow_pattern->mask_bytes, 0, MAX_PATTERN_SIZE);
+ memcpy(wow_pattern->pattern_bytes, patterns[i].pattern,
+ patterns[i].pattern_len);
+ memcpy(wow_pattern->mask_bytes, patterns[i].mask, mask_len);
+ wow_pattern->pattern_len = patterns[i].pattern_len;
+
+ /*
+ * just need to take care of deauth and disssoc pattern,
+ * make sure we don't overwrite them.
+ */
+
+ ath9k_hw_wow_apply_pattern(ah, wow_pattern->pattern_bytes,
+ wow_pattern->mask_bytes,
+ i + 2,
+ wow_pattern->pattern_len);
+ kfree(wow_pattern);
+
+ }
+
+}
+
+static int ath9k_suspend(struct ieee80211_hw *hw,
+ struct cfg80211_wowlan *wowlan)
+{
+ struct ath_softc *sc = hw->priv;
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
+ u32 wow_triggers_enabled = 0;
+ int ret = 0;
+
+ mutex_lock(&sc->mutex);
+
+ ath_cancel_work(sc);
+ del_timer_sync(&common->ani.timer);
+ del_timer_sync(&sc->rx_poll_timer);
+
+ if (test_bit(SC_OP_INVALID, &sc->sc_flags)) {
+ ath_dbg(common, ANY, "Device not present\n");
+ ret = -EINVAL;
+ goto fail_wow;
+ }
+
+ if (WARN_ON(!wowlan)) {
+ ath_dbg(common, WOW, "None of the WoW triggers enabled\n");
+ ret = -EINVAL;
+ goto fail_wow;
+ }
+
+ if (!device_can_wakeup(sc->dev)) {
+ ath_dbg(common, WOW, "device_can_wakeup failed, WoW is not enabled\n");
+ ret = 1;
+ goto fail_wow;
+ }
+
+ /*
+ * none of the sta vifs are associated
+ * and we are not currently handling multivif
+ * cases, for instance we have to seperately
+ * configure 'keep alive frame' for each
+ * STA.
+ */
+
+ if (!test_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags)) {
+ ath_dbg(common, WOW, "None of the STA vifs are associated\n");
+ ret = 1;
+ goto fail_wow;
+ }
+
+ if (sc->nvifs > 1) {
+ ath_dbg(common, WOW, "WoW for multivif is not yet supported\n");
+ ret = 1;
+ goto fail_wow;
+ }
+
+ ath9k_wow_map_triggers(sc, wowlan, &wow_triggers_enabled);
+
+ ath_dbg(common, WOW, "WoW triggers enabled 0x%x\n",
+ wow_triggers_enabled);
+
+ ath9k_ps_wakeup(sc);
+
+ ath9k_stop_btcoex(sc);
+
+ /*
+ * Enable wake up on recieving disassoc/deauth
+ * frame by default.
+ */
+ ath9k_wow_add_disassoc_deauth_pattern(sc);
+
+ if (wow_triggers_enabled & AH_WOW_USER_PATTERN_EN)
+ ath9k_wow_add_pattern(sc, wowlan);
+
+ spin_lock_bh(&sc->sc_pcu_lock);
+ /*
+ * To avoid false wake, we enable beacon miss interrupt only
+ * when we go to sleep. We save the current interrupt mask
+ * so we can restore it after the system wakes up
+ */
+ sc->wow_intr_before_sleep = ah->imask;
+ ah->imask &= ~ATH9K_INT_GLOBAL;
+ ath9k_hw_disable_interrupts(ah);
+ ah->imask = ATH9K_INT_BMISS | ATH9K_INT_GLOBAL;
+ ath9k_hw_set_interrupts(ah);
+ ath9k_hw_enable_interrupts(ah);
+
+ spin_unlock_bh(&sc->sc_pcu_lock);
+
+ /*
+ * we can now sync irq and kill any running tasklets, since we already
+ * disabled interrupts and not holding a spin lock
+ */
+ synchronize_irq(sc->irq);
+ tasklet_kill(&sc->intr_tq);
+
+ ath9k_hw_wow_enable(ah, wow_triggers_enabled);
+
+ ath9k_ps_restore(sc);
+ ath_dbg(common, ANY, "WoW enabled in ath9k\n");
+ atomic_inc(&sc->wow_sleep_proc_intr);
+
+fail_wow:
+ mutex_unlock(&sc->mutex);
+ return ret;
+}
+
+static int ath9k_resume(struct ieee80211_hw *hw)
+{
+ struct ath_softc *sc = hw->priv;
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
+ u32 wow_status;
+
+ mutex_lock(&sc->mutex);
+
+ ath9k_ps_wakeup(sc);
+
+ spin_lock_bh(&sc->sc_pcu_lock);
+
+ ath9k_hw_disable_interrupts(ah);
+ ah->imask = sc->wow_intr_before_sleep;
+ ath9k_hw_set_interrupts(ah);
+ ath9k_hw_enable_interrupts(ah);
+
+ spin_unlock_bh(&sc->sc_pcu_lock);
+
+ wow_status = ath9k_hw_wow_wakeup(ah);
+
+ if (atomic_read(&sc->wow_got_bmiss_intr) == 0) {
+ /*
+ * some devices may not pick beacon miss
+ * as the reason they woke up so we add
+ * that here for that shortcoming.
+ */
+ wow_status |= AH_WOW_BEACON_MISS;
+ atomic_dec(&sc->wow_got_bmiss_intr);
+ ath_dbg(common, ANY, "Beacon miss interrupt picked up during WoW sleep\n");
+ }
+
+ atomic_dec(&sc->wow_sleep_proc_intr);
+
+ if (wow_status) {
+ ath_dbg(common, ANY, "Waking up due to WoW triggers %s with WoW status = %x\n",
+ ath9k_hw_wow_event_to_string(wow_status), wow_status);
+ }
+
+ ath_restart_work(sc);
+ ath9k_start_btcoex(sc);
+
+ ath9k_ps_restore(sc);
+ mutex_unlock(&sc->mutex);
+
+ return 0;
+}
+
+static void ath9k_set_wakeup(struct ieee80211_hw *hw, bool enabled)
+{
+ struct ath_softc *sc = hw->priv;
+
+ mutex_lock(&sc->mutex);
+ device_init_wakeup(sc->dev, 1);
+ device_set_wakeup_enable(sc->dev, enabled);
+ mutex_unlock(&sc->mutex);
+}
+
+#endif
+
struct ieee80211_ops ath9k_ops = {
.tx = ath9k_tx,
.start = ath9k_start,
.set_antenna = ath9k_set_antenna,
.get_antenna = ath9k_get_antenna,
+#ifdef CONFIG_PM_SLEEP
+ .suspend = ath9k_suspend,
+ .resume = ath9k_resume,
+ .set_wakeup = ath9k_set_wakeup,
+#endif
+
#ifdef CONFIG_ATH9K_DEBUGFS
.get_et_sset_count = ath9k_get_et_sset_count,
.get_et_stats = ath9k_get_et_stats,
projects / karo-tx-linux.git / commitdiff