--- /dev/null
+/*
+ * arch/arm/mach-kirkwood/openrd-setup.c
+ *
+ * Marvell OpenRD (Base|Client) Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition openrd_nand_parts[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = SZ_1M,
+ .mask_flags = MTD_WRITEABLE
+ }, {
+ .name = "uImage",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_4M
+ }, {
+ .name = "root",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL
+ },
+};
+
+static struct mv643xx_eth_platform_data openrd_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv643xx_eth_platform_data openrd_ge01_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(24),
+};
+
+static struct mv_sata_platform_data openrd_sata_data = {
+ .n_ports = 2,
+};
+
+static struct mvsdio_platform_data openrd_mvsdio_data = {
+ .gpio_card_detect = 29, /* MPP29 used as SD card detect */
+};
+
+static unsigned int openrd_mpp_config[] __initdata = {
+ MPP29_GPIO,
+ 0
+};
+
+static void __init openrd_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+ kirkwood_mpp_conf(openrd_mpp_config);
+
+ kirkwood_uart0_init();
+ kirkwood_nand_init(ARRAY_AND_SIZE(openrd_nand_parts), 25);
+
+ kirkwood_ehci_init();
+
+ kirkwood_ge00_init(&openrd_ge00_data);
+ if (machine_is_openrd_client())
+ kirkwood_ge01_init(&openrd_ge01_data);
+ kirkwood_sata_init(&openrd_sata_data);
+ kirkwood_sdio_init(&openrd_mvsdio_data);
+
+ kirkwood_i2c_init();
+}
+
+static int __init openrd_pci_init(void)
+{
+ if (machine_is_openrd_base() || machine_is_openrd_client())
+ kirkwood_pcie_init();
+
+ return 0;
+}
+subsys_initcall(openrd_pci_init);
+
+#ifdef CONFIG_MACH_OPENRD_BASE
+MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
+ /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
+ .phys_io = KIRKWOOD_REGS_PHYS_BASE,
+ .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = openrd_init,
+ .map_io = kirkwood_map_io,
+ .init_irq = kirkwood_init_irq,
+ .timer = &kirkwood_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_OPENRD_CLIENT
+MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board")
+ /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
+ .phys_io = KIRKWOOD_REGS_PHYS_BASE,
+ .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = openrd_init,
+ .map_io = kirkwood_map_io,
+ .init_irq = kirkwood_init_irq,
+ .timer = &kirkwood_timer,
+MACHINE_END
+#endif
+++ /dev/null
-/*
- * arch/arm/mach-kirkwood/openrd_base-setup.c
- *
- * Marvell OpenRD Base Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition openrd_base_nand_parts[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = SZ_1M
- }, {
- .name = "uImage",
- .offset = MTDPART_OFS_NXTBLK,
- .size = SZ_4M
- }, {
- .name = "root",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL
- },
-};
-
-static struct mv643xx_eth_platform_data openrd_base_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv_sata_platform_data openrd_base_sata_data = {
- .n_ports = 2,
-};
-
-static struct mvsdio_platform_data openrd_base_mvsdio_data = {
- .gpio_card_detect = 29, /* MPP29 used as SD card detect */
-};
-
-static unsigned int openrd_base_mpp_config[] __initdata = {
- MPP29_GPIO,
- 0
-};
-
-static void __init openrd_base_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_init();
- kirkwood_mpp_conf(openrd_base_mpp_config);
-
- kirkwood_uart0_init();
- kirkwood_nand_init(ARRAY_AND_SIZE(openrd_base_nand_parts), 25);
-
- kirkwood_ehci_init();
-
- kirkwood_ge00_init(&openrd_base_ge00_data);
- kirkwood_sata_init(&openrd_base_sata_data);
- kirkwood_sdio_init(&openrd_base_mvsdio_data);
-
- kirkwood_i2c_init();
-}
-
-static int __init openrd_base_pci_init(void)
-{
- if (machine_is_openrd_base())
- kirkwood_pcie_init();
-
- return 0;
- }
-subsys_initcall(openrd_base_pci_init);
-
-
-MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
- /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
- .phys_io = KIRKWOOD_REGS_PHYS_BASE,
- .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
- .boot_params = 0x00000100,
- .init_machine = openrd_base_init,
- .map_io = kirkwood_map_io,
- .init_irq = kirkwood_init_irq,
- .timer = &kirkwood_timer,
-MACHINE_END
projects / mv-sheeva.git / commitdiff