]> git.karo-electronics.de Git - linux-beck.git/commitdiff
drm/i915: do full backlight setup at enable time
authorJani Nikula <jani.nikula@intel.com>
Thu, 14 Nov 2013 10:13:41 +0000 (12:13 +0200)
committerDaniel Vetter <daniel.vetter@ffwll.ch>
Thu, 14 Nov 2013 11:21:47 +0000 (12:21 +0100)
We should now have all the information we need to do a full
initialization of the backlight registers.

v2: Keep QUIRK_NO_PCH_PWM_ENABLE for now (Imre).

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drivers/gpu/drm/i915/intel_panel.c

index 0e8f0a3d3bf62cf91a7f7c395de783dc9b3d9a49..0986472d425424ab996529b543d480cd5a61d047 100644 (file)
@@ -719,50 +719,75 @@ static void pch_enable_backlight(struct intel_connector *connector)
        enum pipe pipe = intel_get_pipe_from_connector(connector);
        enum transcoder cpu_transcoder =
                intel_pipe_to_cpu_transcoder(dev_priv, pipe);
-       u32 tmp;
-
-       tmp = I915_READ(BLC_PWM_CPU_CTL2);
+       u32 cpu_ctl2, pch_ctl1, pch_ctl2;
 
-       /* Note that this can also get called through dpms changes. And
-        * we don't track the backlight dpms state, hence check whether
-        * we have to do anything first. */
-       if (tmp & BLM_PWM_ENABLE)
-               return;
+       cpu_ctl2 = I915_READ(BLC_PWM_CPU_CTL2);
+       if (cpu_ctl2 & BLM_PWM_ENABLE) {
+               WARN(1, "cpu backlight already enabled\n");
+               cpu_ctl2 &= ~BLM_PWM_ENABLE;
+               I915_WRITE(BLC_PWM_CPU_CTL2, cpu_ctl2);
+       }
 
-       if (INTEL_INFO(dev)->num_pipes == 3)
-               tmp &= ~BLM_PIPE_SELECT_IVB;
-       else
-               tmp &= ~BLM_PIPE_SELECT;
+       pch_ctl1 = I915_READ(BLC_PWM_PCH_CTL1);
+       if (pch_ctl1 & BLM_PCH_PWM_ENABLE) {
+               DRM_DEBUG_KMS("pch backlight already enabled\n");
+               pch_ctl1 &= ~BLM_PCH_PWM_ENABLE;
+               I915_WRITE(BLC_PWM_PCH_CTL1, pch_ctl1);
+       }
 
        if (cpu_transcoder == TRANSCODER_EDP)
-               tmp |= BLM_TRANSCODER_EDP;
+               cpu_ctl2 = BLM_TRANSCODER_EDP;
        else
-               tmp |= BLM_PIPE(cpu_transcoder);
-       tmp &= ~BLM_PWM_ENABLE;
-
-       I915_WRITE(BLC_PWM_CPU_CTL2, tmp);
+               cpu_ctl2 = BLM_PIPE(cpu_transcoder);
+       I915_WRITE(BLC_PWM_CPU_CTL2, cpu_ctl2);
        POSTING_READ(BLC_PWM_CPU_CTL2);
-       I915_WRITE(BLC_PWM_CPU_CTL2, tmp | BLM_PWM_ENABLE);
-
-       if (!(dev_priv->quirks & QUIRK_NO_PCH_PWM_ENABLE)) {
-               tmp = I915_READ(BLC_PWM_PCH_CTL1);
-               tmp |= BLM_PCH_PWM_ENABLE;
-               tmp &= ~BLM_PCH_OVERRIDE_ENABLE;
-               I915_WRITE(BLC_PWM_PCH_CTL1, tmp);
-       }
+       I915_WRITE(BLC_PWM_CPU_CTL2, cpu_ctl2 | BLM_PWM_ENABLE);
 
-       /*
-        * Call below after setting BLC_PWM_CPU_CTL2 and BLC_PWM_PCH_CTL1.
-        * BLC_PWM_CPU_CTL may be cleared to zero automatically when these
-        * registers are set.
-        */
+       /* This won't stick until the above enable. */
        intel_panel_actually_set_backlight(connector, panel->backlight.level);
+
+       pch_ctl2 = panel->backlight.max << 16;
+       I915_WRITE(BLC_PWM_PCH_CTL2, pch_ctl2);
+
+       /* XXX: transitional */
+       if (dev_priv->quirks & QUIRK_NO_PCH_PWM_ENABLE)
+               return;
+
+       pch_ctl1 = 0;
+       if (panel->backlight.active_low_pwm)
+               pch_ctl1 |= BLM_PCH_POLARITY;
+       I915_WRITE(BLC_PWM_PCH_CTL1, pch_ctl1);
+       POSTING_READ(BLC_PWM_PCH_CTL1);
+       I915_WRITE(BLC_PWM_PCH_CTL1, pch_ctl1 | BLM_PCH_PWM_ENABLE);
 }
 
 static void i9xx_enable_backlight(struct intel_connector *connector)
 {
+       struct drm_device *dev = connector->base.dev;
+       struct drm_i915_private *dev_priv = dev->dev_private;
        struct intel_panel *panel = &connector->panel;
+       u32 ctl, freq;
+
+       ctl = I915_READ(BLC_PWM_CTL);
+       if (ctl & BACKLIGHT_DUTY_CYCLE_MASK_PNV) {
+               WARN(1, "backlight already enabled\n");
+               I915_WRITE(BLC_PWM_CTL, 0);
+       }
 
+       freq = panel->backlight.max;
+       if (panel->backlight.combination_mode)
+               freq /= 0xff;
+
+       ctl = freq << 17;
+       if (IS_GEN2(dev) && panel->backlight.combination_mode)
+               ctl |= BLM_LEGACY_MODE;
+       if (IS_PINEVIEW(dev) && panel->backlight.active_low_pwm)
+               ctl |= BLM_POLARITY_PNV;
+
+       I915_WRITE(BLC_PWM_CTL, ctl);
+       POSTING_READ(BLC_PWM_CTL);
+
+       /* XXX: combine this into above write? */
        intel_panel_actually_set_backlight(connector, panel->backlight.level);
 }
 
@@ -772,25 +797,33 @@ static void i965_enable_backlight(struct intel_connector *connector)
        struct drm_i915_private *dev_priv = dev->dev_private;
        struct intel_panel *panel = &connector->panel;
        enum pipe pipe = intel_get_pipe_from_connector(connector);
-       u32 tmp;
+       u32 ctl, ctl2, freq;
 
-       tmp = I915_READ(BLC_PWM_CTL2);
+       ctl2 = I915_READ(BLC_PWM_CTL2);
+       if (ctl2 & BLM_PWM_ENABLE) {
+               WARN(1, "backlight already enabled\n");
+               ctl2 &= ~BLM_PWM_ENABLE;
+               I915_WRITE(BLC_PWM_CTL2, ctl2);
+       }
 
-       /* Note that this can also get called through dpms changes. And
-        * we don't track the backlight dpms state, hence check whether
-        * we have to do anything first. */
-       if (tmp & BLM_PWM_ENABLE)
-               return;
+       freq = panel->backlight.max;
+       if (panel->backlight.combination_mode)
+               freq /= 0xff;
 
-       tmp &= ~BLM_PIPE_SELECT;
-       tmp |= BLM_PIPE(pipe);
-       tmp &= ~BLM_PWM_ENABLE;
-
-       I915_WRITE(BLC_PWM_CTL2, tmp);
-       POSTING_READ(BLC_PWM_CTL2);
-       I915_WRITE(BLC_PWM_CTL2, tmp | BLM_PWM_ENABLE);
+       ctl = freq << 16;
+       I915_WRITE(BLC_PWM_CTL, ctl);
 
+       /* XXX: combine this into above write? */
        intel_panel_actually_set_backlight(connector, panel->backlight.level);
+
+       ctl2 = BLM_PIPE(pipe);
+       if (panel->backlight.combination_mode)
+               ctl2 |= BLM_COMBINATION_MODE;
+       if (panel->backlight.active_low_pwm)
+               ctl2 |= BLM_POLARITY_I965;
+       I915_WRITE(BLC_PWM_CTL2, ctl2);
+       POSTING_READ(BLC_PWM_CTL2);
+       I915_WRITE(BLC_PWM_CTL2, ctl2 | BLM_PWM_ENABLE);
 }
 
 static void vlv_enable_backlight(struct intel_connector *connector)
@@ -799,23 +832,27 @@ static void vlv_enable_backlight(struct intel_connector *connector)
        struct drm_i915_private *dev_priv = dev->dev_private;
        struct intel_panel *panel = &connector->panel;
        enum pipe pipe = intel_get_pipe_from_connector(connector);
-       u32 tmp;
+       u32 ctl, ctl2;
 
-       tmp = I915_READ(VLV_BLC_PWM_CTL2(pipe));
+       ctl2 = I915_READ(VLV_BLC_PWM_CTL2(pipe));
+       if (ctl2 & BLM_PWM_ENABLE) {
+               WARN(1, "backlight already enabled\n");
+               ctl2 &= ~BLM_PWM_ENABLE;
+               I915_WRITE(VLV_BLC_PWM_CTL2(pipe), ctl2);
+       }
 
-       /* Note that this can also get called through dpms changes. And
-        * we don't track the backlight dpms state, hence check whether
-        * we have to do anything first. */
-       if (tmp & BLM_PWM_ENABLE)
-               return;
+       ctl = panel->backlight.max << 16;
+       I915_WRITE(VLV_BLC_PWM_CTL(pipe), ctl);
 
-       tmp &= ~BLM_PWM_ENABLE;
+       /* XXX: combine this into above write? */
+       intel_panel_actually_set_backlight(connector, panel->backlight.level);
 
-       I915_WRITE(VLV_BLC_PWM_CTL2(pipe), tmp);
+       ctl2 = 0;
+       if (panel->backlight.active_low_pwm)
+               ctl2 |= BLM_POLARITY_I965;
+       I915_WRITE(VLV_BLC_PWM_CTL2(pipe), ctl2);
        POSTING_READ(VLV_BLC_PWM_CTL2(pipe));
-       I915_WRITE(VLV_BLC_PWM_CTL2(pipe), tmp | BLM_PWM_ENABLE);
-
-       intel_panel_actually_set_backlight(connector, panel->backlight.level);
+       I915_WRITE(VLV_BLC_PWM_CTL2(pipe), ctl2 | BLM_PWM_ENABLE);
 }
 
 void intel_panel_enable_backlight(struct intel_connector *connector)