Separate this driver into core and i2c functionality.
This is in preparation for adding spi support.
Signed-off-by: Adriana Reus <adriana.reus@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
#
config INV_MPU6050_IIO
- tristate "Invensense MPU6050 devices"
- depends on I2C && SYSFS
+ tristate
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
+
+config INV_MPU6050_I2C
+ tristate "Invensense MPU6050 devices (I2C)"
+ depends on I2C
+ select INV_MPU6050_IIO
select I2C_MUX
select REGMAP_I2C
help
and also in MPU6500 mode with some limitations.
It is a gyroscope/accelerometer combo device.
This driver can be built as a module. The module will be called
- inv-mpu6050.
+ inv-mpu6050-i2c.
#
obj-$(CONFIG_INV_MPU6050_IIO) += inv-mpu6050.o
-inv-mpu6050-objs := inv_mpu_core.o inv_mpu_ring.o inv_mpu_trigger.o inv_mpu_acpi.o
+inv-mpu6050-objs := inv_mpu_core.o inv_mpu_ring.o inv_mpu_trigger.o
+
+obj-$(CONFIG_INV_MPU6050_I2C) += inv-mpu6050-i2c.o
+inv-mpu6050-i2c-objs := inv_mpu_i2c.o inv_mpu_acpi.o
return 0;
}
-int inv_mpu_acpi_create_mux_client(struct inv_mpu6050_state *st)
+int inv_mpu_acpi_create_mux_client(struct i2c_client *client)
{
+ struct inv_mpu6050_state *st = iio_priv(dev_get_drvdata(&client->dev));
st->mux_client = NULL;
- if (ACPI_HANDLE(&st->client->dev)) {
+ if (ACPI_HANDLE(&client->dev)) {
struct i2c_board_info info;
struct acpi_device *adev;
int ret = -1;
- adev = ACPI_COMPANION(&st->client->dev);
+ adev = ACPI_COMPANION(&client->dev);
memset(&info, 0, sizeof(info));
dmi_check_system(inv_mpu_dev_list);
switch (matched_product_name) {
case INV_MPU_ASUS_T100TA:
- ret = asus_acpi_get_sensor_info(adev, st->client,
+ ret = asus_acpi_get_sensor_info(adev, client,
&info);
break;
/* Add more matched product processing here */
/* No matching DMI, so create device on INV6XX type */
unsigned short primary, secondary;
- ret = inv_mpu_process_acpi_config(st->client, &primary,
+ ret = inv_mpu_process_acpi_config(client, &primary,
&secondary);
if (!ret && secondary) {
char *name;
return 0;
}
-void inv_mpu_acpi_delete_mux_client(struct inv_mpu6050_state *st)
+void inv_mpu_acpi_delete_mux_client(struct i2c_client *client)
{
+ struct inv_mpu6050_state *st = iio_priv(dev_get_drvdata(&client->dev));
if (st->mux_client)
i2c_unregister_device(st->mux_client);
}
#include "inv_mpu_iio.h"
-int inv_mpu_acpi_create_mux_client(struct inv_mpu6050_state *st)
+int inv_mpu_acpi_create_mux_client(struct i2c_client *client)
{
return 0;
}
-void inv_mpu_acpi_delete_mux_client(struct inv_mpu6050_state *st)
+void inv_mpu_acpi_delete_mux_client(struct i2c_client *client)
{
}
#endif
#include <linux/acpi.h>
#include "inv_mpu_iio.h"
-static const struct regmap_config inv_mpu_regmap_config = {
- .reg_bits = 8,
- .val_bits = 8,
-};
-
/*
* this is the gyro scale translated from dynamic range plus/minus
* {250, 500, 1000, 2000} to rad/s
},
};
-/*
- * The i2c read/write needs to happen in unlocked mode. As the parent
- * adapter is common. If we use locked versions, it will fail as
- * the mux adapter will lock the parent i2c adapter, while calling
- * select/deselect functions.
- */
-static int inv_mpu6050_write_reg_unlocked(struct inv_mpu6050_state *st,
- u8 reg, u8 d)
-{
- int ret;
- u8 buf[2];
- struct i2c_msg msg[1] = {
- {
- .addr = st->client->addr,
- .flags = 0,
- .len = sizeof(buf),
- .buf = buf,
- }
- };
-
- buf[0] = reg;
- buf[1] = d;
- ret = __i2c_transfer(st->client->adapter, msg, 1);
- if (ret != 1)
- return ret;
-
- return 0;
-}
-
-static int inv_mpu6050_select_bypass(struct i2c_adapter *adap, void *mux_priv,
- u32 chan_id)
-{
- struct iio_dev *indio_dev = mux_priv;
- struct inv_mpu6050_state *st = iio_priv(indio_dev);
- int ret = 0;
-
- /* Use the same mutex which was used everywhere to protect power-op */
- mutex_lock(&indio_dev->mlock);
- if (!st->powerup_count) {
- ret = inv_mpu6050_write_reg_unlocked(st, st->reg->pwr_mgmt_1,
- 0);
- if (ret)
- goto write_error;
-
- msleep(INV_MPU6050_REG_UP_TIME);
- }
- if (!ret) {
- st->powerup_count++;
- ret = inv_mpu6050_write_reg_unlocked(st, st->reg->int_pin_cfg,
- INV_MPU6050_INT_PIN_CFG |
- INV_MPU6050_BIT_BYPASS_EN);
- }
-write_error:
- mutex_unlock(&indio_dev->mlock);
-
- return ret;
-}
-
-static int inv_mpu6050_deselect_bypass(struct i2c_adapter *adap,
- void *mux_priv, u32 chan_id)
-{
- struct iio_dev *indio_dev = mux_priv;
- struct inv_mpu6050_state *st = iio_priv(indio_dev);
-
- mutex_lock(&indio_dev->mlock);
- /* It doesn't really mattter, if any of the calls fails */
- inv_mpu6050_write_reg_unlocked(st, st->reg->int_pin_cfg,
- INV_MPU6050_INT_PIN_CFG);
- st->powerup_count--;
- if (!st->powerup_count)
- inv_mpu6050_write_reg_unlocked(st, st->reg->pwr_mgmt_1,
- INV_MPU6050_BIT_SLEEP);
- mutex_unlock(&indio_dev->mlock);
-
- return 0;
-}
-
int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask)
{
unsigned int d, mgmt_1;
return 0;
}
-/**
- * inv_mpu_probe() - probe function.
- * @client: i2c client.
- * @id: i2c device id.
- *
- * Returns 0 on success, a negative error code otherwise.
- */
-static int inv_mpu_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name)
{
struct inv_mpu6050_state *st;
struct iio_dev *indio_dev;
struct inv_mpu6050_platform_data *pdata;
+ struct device *dev = regmap_get_device(regmap);
int result;
- struct regmap *regmap;
- if (!i2c_check_functionality(client->adapter,
- I2C_FUNC_SMBUS_I2C_BLOCK))
- return -ENOSYS;
-
- regmap = devm_regmap_init_i2c(client, &inv_mpu_regmap_config);
- if (IS_ERR(regmap)) {
- dev_err(&client->dev, "Failed to register i2c regmap %d\n",
- (int)PTR_ERR(regmap));
- return PTR_ERR(regmap);
- }
-
- indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st));
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
if (!indio_dev)
return -ENOMEM;
st = iio_priv(indio_dev);
- st->client = client;
st->powerup_count = 0;
+ st->irq = irq;
st->map = regmap;
- pdata = dev_get_platdata(&client->dev);
+ pdata = dev_get_platdata(dev);
if (pdata)
st->plat_data = *pdata;
/* power is turned on inside check chip type*/
result = inv_mpu6050_init_config(indio_dev);
if (result) {
- dev_err(&client->dev,
- "Could not initialize device.\n");
+ dev_err(dev, "Could not initialize device.\n");
return result;
}
- i2c_set_clientdata(client, indio_dev);
- indio_dev->dev.parent = &client->dev;
- /* id will be NULL when enumerated via ACPI */
- if (id)
- indio_dev->name = (char *)id->name;
+ dev_set_drvdata(dev, indio_dev);
+ indio_dev->dev.parent = dev;
+ /* name will be NULL when enumerated via ACPI */
+ if (name)
+ indio_dev->name = name;
else
- indio_dev->name = (char *)dev_name(&client->dev);
+ indio_dev->name = dev_name(dev);
indio_dev->channels = inv_mpu_channels;
indio_dev->num_channels = ARRAY_SIZE(inv_mpu_channels);
inv_mpu6050_read_fifo,
NULL);
if (result) {
- dev_err(&st->client->dev, "configure buffer fail %d\n",
- result);
+ dev_err(dev, "configure buffer fail %d\n", result);
return result;
}
result = inv_mpu6050_probe_trigger(indio_dev);
if (result) {
- dev_err(&st->client->dev, "trigger probe fail %d\n", result);
+ dev_err(dev, "trigger probe fail %d\n", result);
goto out_unreg_ring;
}
spin_lock_init(&st->time_stamp_lock);
result = iio_device_register(indio_dev);
if (result) {
- dev_err(&st->client->dev, "IIO register fail %d\n", result);
+ dev_err(dev, "IIO register fail %d\n", result);
goto out_remove_trigger;
}
- st->mux_adapter = i2c_add_mux_adapter(client->adapter,
- &client->dev,
- indio_dev,
- 0, 0, 0,
- inv_mpu6050_select_bypass,
- inv_mpu6050_deselect_bypass);
- if (!st->mux_adapter) {
- result = -ENODEV;
- goto out_unreg_device;
- }
-
- result = inv_mpu_acpi_create_mux_client(st);
- if (result)
- goto out_del_mux;
-
return 0;
-out_del_mux:
- i2c_del_mux_adapter(st->mux_adapter);
-out_unreg_device:
- iio_device_unregister(indio_dev);
out_remove_trigger:
inv_mpu6050_remove_trigger(st);
out_unreg_ring:
iio_triggered_buffer_cleanup(indio_dev);
return result;
}
+EXPORT_SYMBOL_GPL(inv_mpu_core_probe);
-static int inv_mpu_remove(struct i2c_client *client)
+int inv_mpu_core_remove(struct device *dev)
{
- struct iio_dev *indio_dev = i2c_get_clientdata(client);
- struct inv_mpu6050_state *st = iio_priv(indio_dev);
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
- inv_mpu_acpi_delete_mux_client(st);
- i2c_del_mux_adapter(st->mux_adapter);
iio_device_unregister(indio_dev);
- inv_mpu6050_remove_trigger(st);
+ inv_mpu6050_remove_trigger(iio_priv(indio_dev));
iio_triggered_buffer_cleanup(indio_dev);
return 0;
}
+EXPORT_SYMBOL_GPL(inv_mpu_core_remove);
+
#ifdef CONFIG_PM_SLEEP
static int inv_mpu_resume(struct device *dev)
{
- return inv_mpu6050_set_power_itg(
- iio_priv(i2c_get_clientdata(to_i2c_client(dev))), true);
+ return inv_mpu6050_set_power_itg(iio_priv(dev_get_drvdata(dev)), true);
}
static int inv_mpu_suspend(struct device *dev)
{
- return inv_mpu6050_set_power_itg(
- iio_priv(i2c_get_clientdata(to_i2c_client(dev))), false);
+ return inv_mpu6050_set_power_itg(iio_priv(dev_get_drvdata(dev)), false);
}
-static SIMPLE_DEV_PM_OPS(inv_mpu_pmops, inv_mpu_suspend, inv_mpu_resume);
-
-#define INV_MPU6050_PMOPS (&inv_mpu_pmops)
-#else
-#define INV_MPU6050_PMOPS NULL
#endif /* CONFIG_PM_SLEEP */
-/*
- * device id table is used to identify what device can be
- * supported by this driver
- */
-static const struct i2c_device_id inv_mpu_id[] = {
- {"mpu6050", INV_MPU6050},
- {"mpu6500", INV_MPU6500},
- {}
-};
-
-MODULE_DEVICE_TABLE(i2c, inv_mpu_id);
-
-static const struct acpi_device_id inv_acpi_match[] = {
- {"INVN6500", 0},
- { },
-};
-
-MODULE_DEVICE_TABLE(acpi, inv_acpi_match);
-
-static struct i2c_driver inv_mpu_driver = {
- .probe = inv_mpu_probe,
- .remove = inv_mpu_remove,
- .id_table = inv_mpu_id,
- .driver = {
- .name = "inv-mpu6050",
- .pm = INV_MPU6050_PMOPS,
- .acpi_match_table = ACPI_PTR(inv_acpi_match),
- },
-};
-
-module_i2c_driver(inv_mpu_driver);
+SIMPLE_DEV_PM_OPS(inv_mpu_pmops, inv_mpu_suspend, inv_mpu_resume);
+EXPORT_SYMBOL_GPL(inv_mpu_pmops);
MODULE_AUTHOR("Invensense Corporation");
MODULE_DESCRIPTION("Invensense device MPU6050 driver");
--- /dev/null
+/*
+* Copyright (C) 2012 Invensense, Inc.
+*
+* This software is licensed under the terms of the GNU General Public
+* License version 2, as published by the Free Software Foundation, and
+* may be copied, distributed, and modified under those terms.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*/
+
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/i2c-mux.h>
+#include <linux/iio/iio.h>
+#include <linux/module.h>
+#include "inv_mpu_iio.h"
+
+static const struct regmap_config inv_mpu_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
+/*
+ * The i2c read/write needs to happen in unlocked mode. As the parent
+ * adapter is common. If we use locked versions, it will fail as
+ * the mux adapter will lock the parent i2c adapter, while calling
+ * select/deselect functions.
+ */
+static int inv_mpu6050_write_reg_unlocked(struct i2c_client *client,
+ u8 reg, u8 d)
+{
+ int ret;
+ u8 buf[2] = {reg, d};
+ struct i2c_msg msg[1] = {
+ {
+ .addr = client->addr,
+ .flags = 0,
+ .len = sizeof(buf),
+ .buf = buf,
+ }
+ };
+
+ ret = __i2c_transfer(client->adapter, msg, 1);
+ if (ret != 1)
+ return ret;
+
+ return 0;
+}
+
+static int inv_mpu6050_select_bypass(struct i2c_adapter *adap, void *mux_priv,
+ u32 chan_id)
+{
+ struct i2c_client *client = mux_priv;
+ struct iio_dev *indio_dev = dev_get_drvdata(&client->dev);
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
+ int ret = 0;
+
+ /* Use the same mutex which was used everywhere to protect power-op */
+ mutex_lock(&indio_dev->mlock);
+ if (!st->powerup_count) {
+ ret = inv_mpu6050_write_reg_unlocked(client,
+ st->reg->pwr_mgmt_1, 0);
+ if (ret)
+ goto write_error;
+
+ msleep(INV_MPU6050_REG_UP_TIME);
+ }
+ if (!ret) {
+ st->powerup_count++;
+ ret = inv_mpu6050_write_reg_unlocked(client,
+ st->reg->int_pin_cfg,
+ INV_MPU6050_INT_PIN_CFG |
+ INV_MPU6050_BIT_BYPASS_EN);
+ }
+write_error:
+ mutex_unlock(&indio_dev->mlock);
+
+ return ret;
+}
+
+static int inv_mpu6050_deselect_bypass(struct i2c_adapter *adap,
+ void *mux_priv, u32 chan_id)
+{
+ struct i2c_client *client = mux_priv;
+ struct iio_dev *indio_dev = dev_get_drvdata(&client->dev);
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
+
+ mutex_lock(&indio_dev->mlock);
+ /* It doesn't really mattter, if any of the calls fails */
+ inv_mpu6050_write_reg_unlocked(client, st->reg->int_pin_cfg,
+ INV_MPU6050_INT_PIN_CFG);
+ st->powerup_count--;
+ if (!st->powerup_count)
+ inv_mpu6050_write_reg_unlocked(client, st->reg->pwr_mgmt_1,
+ INV_MPU6050_BIT_SLEEP);
+ mutex_unlock(&indio_dev->mlock);
+
+ return 0;
+}
+
+/**
+ * inv_mpu_probe() - probe function.
+ * @client: i2c client.
+ * @id: i2c device id.
+ *
+ * Returns 0 on success, a negative error code otherwise.
+ */
+static int inv_mpu_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct inv_mpu6050_state *st;
+ int result;
+ const char *name = id ? id->name : NULL;
+ struct regmap *regmap;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_I2C_BLOCK))
+ return -ENOSYS;
+
+ regmap = devm_regmap_init_i2c(client, &inv_mpu_regmap_config);
+ if (IS_ERR(regmap)) {
+ dev_err(&client->dev, "Failed to register i2c regmap %d\n",
+ (int)PTR_ERR(regmap));
+ return PTR_ERR(regmap);
+ }
+
+ result = inv_mpu_core_probe(regmap, client->irq, name);
+ if (result < 0)
+ return result;
+
+ st = iio_priv(dev_get_drvdata(&client->dev));
+ st->mux_adapter = i2c_add_mux_adapter(client->adapter,
+ &client->dev,
+ client,
+ 0, 0, 0,
+ inv_mpu6050_select_bypass,
+ inv_mpu6050_deselect_bypass);
+ if (!st->mux_adapter) {
+ result = -ENODEV;
+ goto out_unreg_device;
+ }
+
+ result = inv_mpu_acpi_create_mux_client(client);
+ if (result)
+ goto out_del_mux;
+
+ return 0;
+
+out_del_mux:
+ i2c_del_mux_adapter(st->mux_adapter);
+out_unreg_device:
+ inv_mpu_core_remove(&client->dev);
+ return result;
+}
+
+static int inv_mpu_remove(struct i2c_client *client)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
+
+ inv_mpu_acpi_delete_mux_client(client);
+ i2c_del_mux_adapter(st->mux_adapter);
+
+ return inv_mpu_core_remove(&client->dev);
+}
+
+/*
+ * device id table is used to identify what device can be
+ * supported by this driver
+ */
+static const struct i2c_device_id inv_mpu_id[] = {
+ {"mpu6050", INV_MPU6050},
+ {"mpu6500", INV_MPU6500},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, inv_mpu_id);
+
+static const struct acpi_device_id inv_acpi_match[] = {
+ {"INVN6500", 0},
+ { },
+};
+
+MODULE_DEVICE_TABLE(acpi, inv_acpi_match);
+
+static struct i2c_driver inv_mpu_driver = {
+ .probe = inv_mpu_probe,
+ .remove = inv_mpu_remove,
+ .id_table = inv_mpu_id,
+ .driver = {
+ .acpi_match_table = ACPI_PTR(inv_acpi_match),
+ .name = "inv-mpu6050-i2c",
+ .pm = &inv_mpu_pmops,
+ },
+};
+
+module_i2c_driver(inv_mpu_driver);
+
+MODULE_AUTHOR("Invensense Corporation");
+MODULE_DESCRIPTION("Invensense device MPU6050 driver");
+MODULE_LICENSE("GPL");
* @hw: Other hardware-specific information.
* @chip_type: chip type.
* @time_stamp_lock: spin lock to time stamp.
- * @client: i2c client handle.
* @plat_data: platform data.
* @timestamps: kfifo queue to store time stamp.
+ * @map regmap pointer.
+ * @irq interrupt number.
*/
struct inv_mpu6050_state {
#define TIMESTAMP_FIFO_SIZE 16
const struct inv_mpu6050_hw *hw;
enum inv_devices chip_type;
spinlock_t time_stamp_lock;
- struct i2c_client *client;
struct i2c_adapter *mux_adapter;
struct i2c_client *mux_client;
unsigned int powerup_count;
struct inv_mpu6050_platform_data plat_data;
DECLARE_KFIFO(timestamps, long long, TIMESTAMP_FIFO_SIZE);
struct regmap *map;
+ int irq;
};
/*register and associated bit definition*/
int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask);
int inv_mpu6050_write_reg(struct inv_mpu6050_state *st, int reg, u8 val);
int inv_mpu6050_set_power_itg(struct inv_mpu6050_state *st, bool power_on);
-int inv_mpu_acpi_create_mux_client(struct inv_mpu6050_state *st);
-void inv_mpu_acpi_delete_mux_client(struct inv_mpu6050_state *st);
+int inv_mpu_acpi_create_mux_client(struct i2c_client *client);
+void inv_mpu_acpi_delete_mux_client(struct i2c_client *client);
+int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name);
+int inv_mpu_core_remove(struct device *dev);
+extern const struct dev_pm_ops inv_mpu_pmops;
/* disable interrupt */
result = regmap_write(st->map, st->reg->int_enable, 0);
if (result) {
- dev_err(&st->client->dev, "int_enable failed %d\n", result);
+ dev_err(regmap_get_device(st->map), "int_enable failed %d\n",
+ result);
return result;
}
/* disable the sensor output to FIFO */
return 0;
reset_fifo_fail:
- dev_err(&st->client->dev, "reset fifo failed %d\n", result);
+ dev_err(regmap_get_device(st->map), "reset fifo failed %d\n", result);
result = regmap_write(st->map, st->reg->int_enable,
INV_MPU6050_BIT_DATA_RDY_EN);
if (!st->trig)
return -ENOMEM;
- ret = devm_request_irq(&indio_dev->dev, st->client->irq,
+ ret = devm_request_irq(&indio_dev->dev, st->irq,
&iio_trigger_generic_data_rdy_poll,
IRQF_TRIGGER_RISING,
"inv_mpu",
if (ret)
return ret;
- st->trig->dev.parent = &st->client->dev;
+ st->trig->dev.parent = regmap_get_device(st->map);
st->trig->ops = &inv_mpu_trigger_ops;
iio_trigger_set_drvdata(st->trig, indio_dev);
projects / karo-tx-linux.git / commitdiff