compatible = "motorola,cpcap", "st,6556002";
reg = <0>; /* cs0 */
interrupt-parent = <&gpio1>;
- interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
#address-cells = <1>;
spi-max-frequency = <3000000>;
spi-cs-high;
+ cpcap_adc: adc {
+ compatible = "motorola,mapphone-cpcap-adc";
+ interrupts-extended = <&cpcap 8 0>;
+ interrupt-names = "adcdone";
+ #io-channel-cells = <1>;
+ };
+
+ cpcap_charger: charger {
+ compatible = "motorola,mapphone-cpcap-charger";
+ interrupts-extended = <
+ &cpcap 13 0 &cpcap 12 0 &cpcap 29 0 &cpcap 28 0
+ &cpcap 22 0 &cpcap 20 0 &cpcap 19 0 &cpcap 54 0
+ >;
+ interrupt-names =
+ "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn",
+ "rvrs_mode", "chrgcurr1", "vbusvld", "battdetb";
+ mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW
+ &gpio3 23 GPIO_ACTIVE_LOW>;
+ io-channels = <&cpcap_adc 0 &cpcap_adc 1
+ &cpcap_adc 2 &cpcap_adc 5
+ &cpcap_adc 6>;
+ io-channel-names = "battdetb", "battp",
+ "vbus", "chg_isense",
+ "batti";
+ };
+
cpcap_regulator: regulator {
compatible = "motorola,mapphone-cpcap-regulator";
interrupts = <23 IRQ_TYPE_NONE>;
};
+ cpcap_usb2_phy: phy {
+ compatible = "motorola,mapphone-cpcap-usb-phy";
+ pinctrl-0 = <&usb_gpio_mux_sel1 &usb_gpio_mux_sel2>;
+ pinctrl-1 = <&usb_ulpi_pins>;
+ pinctrl-2 = <&usb_utmi_pins>;
+ pinctrl-3 = <&uart3_pins>;
+ pinctrl-names = "default", "ulpi", "utmi", "uart";
+ #phy-cells = <0>;
+ interrupts-extended = <
+ &cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0
+ &cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0
+ &cpcap 48 1
+ >;
+ interrupt-names =
+ "id_ground", "id_float", "se0conn", "vbusvld",
+ "sessvld", "sessend", "se1", "dm", "dp";
+ mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH
+ &gpio1 0 GPIO_ACTIVE_HIGH>;
+ io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>;
+ io-channel-names = "vbus", "id";
+ vusb-supply = <&vusb>;
+ };
+
led_red: led-red {
compatible = "motorola,cpcap-led-red";
vdd-supply = <&sw5>;
/*
* We seem to have only 1021 MB accessible, 1021 - 1022 is locked,
- * then 1023 - 1024 seems to contain mbm. For SRAM, see the notes
- * below about SRAM and L3_ICLK2 being unused by default,
+ * then 1023 - 1024 seems to contain mbm.
*/
memory {
device_type = "memory";
};
};
-/* L3_2 interconnect is unused, SRAM, GPMC and L3_ICLK2 disabled */
-&gpmc {
- status = "disabled";
-};
-
&hdmi {
status = "okay";
pinctrl-0 = <&dss_hdmi_pins>;
};
};
-/* L3_2 interconnect is unused, SRAM, GPMC and L3_ICLK2 disabled */
-&ocmcram {
- status = "disabled";
-};
-
&omap4_pmx_core {
/* hdmi_hpd.gpio_63 */