]> git.karo-electronics.de Git - karo-tx-linux.git/commitdiff
MIPS: Netlogic: Add XLP platform files for XLP SoC
authorJayachandran C <jayachandranc@netlogicmicro.com>
Wed, 16 Nov 2011 00:21:28 +0000 (00:21 +0000)
committerRalf Baechle <ralf@linux-mips.org>
Wed, 16 Nov 2011 00:21:28 +0000 (00:21 +0000)
- Update common files to support XLP.
- Add arch/mips/include/asm/netlogic/xlp-hal for register definitions
  and access macros
- Add arch/mips/netlogic/xlp/ for XLP specific files.

Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2967/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
16 files changed:
arch/mips/include/asm/netlogic/haldefs.h
arch/mips/include/asm/netlogic/xlp-hal/bridge.h [new file with mode: 0644]
arch/mips/include/asm/netlogic/xlp-hal/cpucontrol.h [new file with mode: 0644]
arch/mips/include/asm/netlogic/xlp-hal/iomap.h [new file with mode: 0644]
arch/mips/include/asm/netlogic/xlp-hal/pic.h [new file with mode: 0644]
arch/mips/include/asm/netlogic/xlp-hal/sys.h [new file with mode: 0644]
arch/mips/include/asm/netlogic/xlp-hal/uart.h [new file with mode: 0644]
arch/mips/include/asm/netlogic/xlp-hal/xlp.h [new file with mode: 0644]
arch/mips/netlogic/common/earlycons.c
arch/mips/netlogic/common/irq.c
arch/mips/netlogic/common/smp.c
arch/mips/netlogic/xlp/nlm_hal.c [new file with mode: 0644]
arch/mips/netlogic/xlp/platform.c [new file with mode: 0644]
arch/mips/netlogic/xlp/setup.c [new file with mode: 0644]
arch/mips/netlogic/xlp/smpboot.S [new file with mode: 0644]
arch/mips/netlogic/xlp/wakeup.c [new file with mode: 0644]

index e3264c19aabeb6f8d7bd2bfb01e9ff9410061152..72a0c788b472989fa858e69fbde96b1dc76f951d 100644 (file)
@@ -40,6 +40,9 @@
  * and will provide a way to read 32/64 bit memory mapped registers in
  * all ABIs
  */
+#if !defined(CONFIG_64BIT) && defined(CONFIG_CPU_XLP)
+#error "o32 compile not supported on XLP yet"
+#endif
 /*
  * For o32 compilation, we have to disable interrupts and enable KX bit to
  * access 64 bit addresses or data.
@@ -133,10 +136,28 @@ nlm_write_reg64_xkphys(uint64_t base, uint32_t reg, uint64_t val)
 /* Location where IO base is mapped */
 extern uint64_t nlm_io_base;
 
+#if defined(CONFIG_CPU_XLP)
+static inline uint64_t
+nlm_pcicfg_base(uint32_t devoffset)
+{
+       return nlm_io_base + devoffset;
+}
+
+static inline uint64_t
+nlm_xkphys_map_pcibar0(uint64_t pcibase)
+{
+       uint64_t paddr;
+
+       paddr = nlm_read_reg(pcibase, 0x4) & ~0xfu;
+       return (uint64_t)0x9000000000000000 | paddr;
+}
+#elif defined(CONFIG_CPU_XLR)
+
 static inline uint64_t
 nlm_mmio_base(uint32_t devoffset)
 {
        return nlm_io_base + devoffset;
 }
+#endif
 
 #endif
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/bridge.h b/arch/mips/include/asm/netlogic/xlp-hal/bridge.h
new file mode 100644 (file)
index 0000000..ca95133
--- /dev/null
@@ -0,0 +1,187 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __NLM_HAL_BRIDGE_H__
+#define __NLM_HAL_BRIDGE_H__
+
+/**
+* @file_name mio.h
+* @author Netlogic Microsystems
+* @brief Basic definitions of XLP memory and io subsystem
+*/
+
+/*
+ * BRIDGE specific registers
+ *
+ * These registers start after the PCIe header, which has 0x40
+ * standard entries
+ */
+#define BRIDGE_MODE                    0x00
+#define BRIDGE_PCI_CFG_BASE            0x01
+#define BRIDGE_PCI_CFG_LIMIT           0x02
+#define BRIDGE_PCIE_CFG_BASE           0x03
+#define BRIDGE_PCIE_CFG_LIMIT          0x04
+#define BRIDGE_BUSNUM_BAR0             0x05
+#define BRIDGE_BUSNUM_BAR1             0x06
+#define BRIDGE_BUSNUM_BAR2             0x07
+#define BRIDGE_BUSNUM_BAR3             0x08
+#define BRIDGE_BUSNUM_BAR4             0x09
+#define BRIDGE_BUSNUM_BAR5             0x0a
+#define BRIDGE_BUSNUM_BAR6             0x0b
+#define BRIDGE_FLASH_BAR0              0x0c
+#define BRIDGE_FLASH_BAR1              0x0d
+#define BRIDGE_FLASH_BAR2              0x0e
+#define BRIDGE_FLASH_BAR3              0x0f
+#define BRIDGE_FLASH_LIMIT0            0x10
+#define BRIDGE_FLASH_LIMIT1            0x11
+#define BRIDGE_FLASH_LIMIT2            0x12
+#define BRIDGE_FLASH_LIMIT3            0x13
+
+#define BRIDGE_DRAM_BAR(i)             (0x14 + (i))
+#define BRIDGE_DRAM_BAR0               0x14
+#define BRIDGE_DRAM_BAR1               0x15
+#define BRIDGE_DRAM_BAR2               0x16
+#define BRIDGE_DRAM_BAR3               0x17
+#define BRIDGE_DRAM_BAR4               0x18
+#define BRIDGE_DRAM_BAR5               0x19
+#define BRIDGE_DRAM_BAR6               0x1a
+#define BRIDGE_DRAM_BAR7               0x1b
+
+#define BRIDGE_DRAM_LIMIT(i)           (0x1c + (i))
+#define BRIDGE_DRAM_LIMIT0             0x1c
+#define BRIDGE_DRAM_LIMIT1             0x1d
+#define BRIDGE_DRAM_LIMIT2             0x1e
+#define BRIDGE_DRAM_LIMIT3             0x1f
+#define BRIDGE_DRAM_LIMIT4             0x20
+#define BRIDGE_DRAM_LIMIT5             0x21
+#define BRIDGE_DRAM_LIMIT6             0x22
+#define BRIDGE_DRAM_LIMIT7             0x23
+
+#define BRIDGE_DRAM_NODE_TRANSLN0      0x24
+#define BRIDGE_DRAM_NODE_TRANSLN1      0x25
+#define BRIDGE_DRAM_NODE_TRANSLN2      0x26
+#define BRIDGE_DRAM_NODE_TRANSLN3      0x27
+#define BRIDGE_DRAM_NODE_TRANSLN4      0x28
+#define BRIDGE_DRAM_NODE_TRANSLN5      0x29
+#define BRIDGE_DRAM_NODE_TRANSLN6      0x2a
+#define BRIDGE_DRAM_NODE_TRANSLN7      0x2b
+#define BRIDGE_DRAM_CHNL_TRANSLN0      0x2c
+#define BRIDGE_DRAM_CHNL_TRANSLN1      0x2d
+#define BRIDGE_DRAM_CHNL_TRANSLN2      0x2e
+#define BRIDGE_DRAM_CHNL_TRANSLN3      0x2f
+#define BRIDGE_DRAM_CHNL_TRANSLN4      0x30
+#define BRIDGE_DRAM_CHNL_TRANSLN5      0x31
+#define BRIDGE_DRAM_CHNL_TRANSLN6      0x32
+#define BRIDGE_DRAM_CHNL_TRANSLN7      0x33
+#define BRIDGE_PCIEMEM_BASE0           0x34
+#define BRIDGE_PCIEMEM_BASE1           0x35
+#define BRIDGE_PCIEMEM_BASE2           0x36
+#define BRIDGE_PCIEMEM_BASE3           0x37
+#define BRIDGE_PCIEMEM_LIMIT0          0x38
+#define BRIDGE_PCIEMEM_LIMIT1          0x39
+#define BRIDGE_PCIEMEM_LIMIT2          0x3a
+#define BRIDGE_PCIEMEM_LIMIT3          0x3b
+#define BRIDGE_PCIEIO_BASE0            0x3c
+#define BRIDGE_PCIEIO_BASE1            0x3d
+#define BRIDGE_PCIEIO_BASE2            0x3e
+#define BRIDGE_PCIEIO_BASE3            0x3f
+#define BRIDGE_PCIEIO_LIMIT0           0x40
+#define BRIDGE_PCIEIO_LIMIT1           0x41
+#define BRIDGE_PCIEIO_LIMIT2           0x42
+#define BRIDGE_PCIEIO_LIMIT3           0x43
+#define BRIDGE_PCIEMEM_BASE4           0x44
+#define BRIDGE_PCIEMEM_BASE5           0x45
+#define BRIDGE_PCIEMEM_BASE6           0x46
+#define BRIDGE_PCIEMEM_LIMIT4          0x47
+#define BRIDGE_PCIEMEM_LIMIT5          0x48
+#define BRIDGE_PCIEMEM_LIMIT6          0x49
+#define BRIDGE_PCIEIO_BASE4            0x4a
+#define BRIDGE_PCIEIO_BASE5            0x4b
+#define BRIDGE_PCIEIO_BASE6            0x4c
+#define BRIDGE_PCIEIO_LIMIT4           0x4d
+#define BRIDGE_PCIEIO_LIMIT5           0x4e
+#define BRIDGE_PCIEIO_LIMIT6           0x4f
+#define BRIDGE_NBU_EVENT_CNT_CTL       0x50
+#define BRIDGE_EVNTCTR1_LOW            0x51
+#define BRIDGE_EVNTCTR1_HI             0x52
+#define BRIDGE_EVNT_CNT_CTL2           0x53
+#define BRIDGE_EVNTCTR2_LOW            0x54
+#define BRIDGE_EVNTCTR2_HI             0x55
+#define BRIDGE_TRACEBUF_MATCH0         0x56
+#define BRIDGE_TRACEBUF_MATCH1         0x57
+#define BRIDGE_TRACEBUF_MATCH_LOW      0x58
+#define BRIDGE_TRACEBUF_MATCH_HI       0x59
+#define BRIDGE_TRACEBUF_CTRL           0x5a
+#define BRIDGE_TRACEBUF_INIT           0x5b
+#define BRIDGE_TRACEBUF_ACCESS         0x5c
+#define BRIDGE_TRACEBUF_READ_DATA0     0x5d
+#define BRIDGE_TRACEBUF_READ_DATA1     0x5d
+#define BRIDGE_TRACEBUF_READ_DATA2     0x5f
+#define BRIDGE_TRACEBUF_READ_DATA3     0x60
+#define BRIDGE_TRACEBUF_STATUS         0x61
+#define BRIDGE_ADDRESS_ERROR0          0x62
+#define BRIDGE_ADDRESS_ERROR1          0x63
+#define BRIDGE_ADDRESS_ERROR2          0x64
+#define BRIDGE_TAG_ECC_ADDR_ERROR0     0x65
+#define BRIDGE_TAG_ECC_ADDR_ERROR1     0x66
+#define BRIDGE_TAG_ECC_ADDR_ERROR2     0x67
+#define BRIDGE_LINE_FLUSH0             0x68
+#define BRIDGE_LINE_FLUSH1             0x69
+#define BRIDGE_NODE_ID                 0x6a
+#define BRIDGE_ERROR_INTERRUPT_EN      0x6b
+#define BRIDGE_PCIE0_WEIGHT            0x2c0
+#define BRIDGE_PCIE1_WEIGHT            0x2c1
+#define BRIDGE_PCIE2_WEIGHT            0x2c2
+#define BRIDGE_PCIE3_WEIGHT            0x2c3
+#define BRIDGE_USB_WEIGHT              0x2c4
+#define BRIDGE_NET_WEIGHT              0x2c5
+#define BRIDGE_POE_WEIGHT              0x2c6
+#define BRIDGE_CMS_WEIGHT              0x2c7
+#define BRIDGE_DMAENG_WEIGHT           0x2c8
+#define BRIDGE_SEC_WEIGHT              0x2c9
+#define BRIDGE_COMP_WEIGHT             0x2ca
+#define BRIDGE_GIO_WEIGHT              0x2cb
+#define BRIDGE_FLASH_WEIGHT            0x2cc
+
+#ifndef __ASSEMBLY__
+
+#define nlm_read_bridge_reg(b, r)      nlm_read_reg(b, r)
+#define nlm_write_bridge_reg(b, r, v)  nlm_write_reg(b, r, v)
+#define        nlm_get_bridge_pcibase(node)    \
+                       nlm_pcicfg_base(XLP_IO_BRIDGE_OFFSET(node))
+#define        nlm_get_bridge_regbase(node)    \
+                       (nlm_get_bridge_pcibase(node) + XLP_IO_PCI_HDRSZ)
+
+#endif /* __ASSEMBLY__ */
+#endif /* __NLM_HAL_BRIDGE_H__ */
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/cpucontrol.h b/arch/mips/include/asm/netlogic/xlp-hal/cpucontrol.h
new file mode 100644 (file)
index 0000000..bf7d41d
--- /dev/null
@@ -0,0 +1,83 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __NLM_HAL_CPUCONTROL_H__
+#define __NLM_HAL_CPUCONTROL_H__
+
+#define CPU_BLOCKID_IFU                0
+#define CPU_BLOCKID_ICU                1
+#define CPU_BLOCKID_IEU                2
+#define CPU_BLOCKID_LSU                3
+#define CPU_BLOCKID_MMU                4
+#define CPU_BLOCKID_PRF                5
+#define CPU_BLOCKID_SCH                7
+#define CPU_BLOCKID_SCU                8
+#define CPU_BLOCKID_FPU                9
+#define CPU_BLOCKID_MAP                10
+
+#define LSU_DEFEATURE          0x304
+#define LSU_CERRLOG_REGID      0x09
+#define SCHED_DEFEATURE                0x700
+
+/* Offsets of interest from the 'MAP' Block */
+#define MAP_THREADMODE                 0x00
+#define MAP_EXT_EBASE_ENABLE           0x04
+#define MAP_CCDI_CONFIG                        0x08
+#define MAP_THRD0_CCDI_STATUS          0x0c
+#define MAP_THRD1_CCDI_STATUS          0x10
+#define MAP_THRD2_CCDI_STATUS          0x14
+#define MAP_THRD3_CCDI_STATUS          0x18
+#define MAP_THRD0_DEBUG_MODE           0x1c
+#define MAP_THRD1_DEBUG_MODE           0x20
+#define MAP_THRD2_DEBUG_MODE           0x24
+#define MAP_THRD3_DEBUG_MODE           0x28
+#define MAP_MISC_STATE                 0x60
+#define MAP_DEBUG_READ_CTL             0x64
+#define MAP_DEBUG_READ_REG0            0x68
+#define MAP_DEBUG_READ_REG1            0x6c
+
+#define MMU_SETUP              0x400
+#define MMU_LFSRSEED           0x401
+#define MMU_HPW_NUM_PAGE_LVL   0x410
+#define MMU_PGWKR_PGDBASE      0x411
+#define MMU_PGWKR_PGDSHFT      0x412
+#define MMU_PGWKR_PGDMASK      0x413
+#define MMU_PGWKR_PUDSHFT      0x414
+#define MMU_PGWKR_PUDMASK      0x415
+#define MMU_PGWKR_PMDSHFT      0x416
+#define MMU_PGWKR_PMDMASK      0x417
+#define MMU_PGWKR_PTESHFT      0x418
+#define MMU_PGWKR_PTEMASK      0x419
+
+#endif /* __NLM_CPUCONTROL_H__ */
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/iomap.h b/arch/mips/include/asm/netlogic/xlp-hal/iomap.h
new file mode 100644 (file)
index 0000000..86cc339
--- /dev/null
@@ -0,0 +1,153 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __NLM_HAL_IOMAP_H__
+#define __NLM_HAL_IOMAP_H__
+
+#define XLP_DEFAULT_IO_BASE             0x18000000
+#define NMI_BASE                       0xbfc00000
+#define        XLP_IO_CLK                      133333333
+
+#define XLP_PCIE_CFG_SIZE              0x1000          /* 4K */
+#define XLP_PCIE_DEV_BLK_SIZE          (8 * XLP_PCIE_CFG_SIZE)
+#define XLP_PCIE_BUS_BLK_SIZE          (256 * XLP_PCIE_DEV_BLK_SIZE)
+#define XLP_IO_SIZE                    (64 << 20)      /* ECFG space size */
+#define XLP_IO_PCI_HDRSZ               0x100
+#define XLP_IO_DEV(node, dev)          ((dev) + (node) * 8)
+#define XLP_HDR_OFFSET(node, bus, dev, fn)     (((bus) << 20) | \
+                               ((XLP_IO_DEV(node, dev)) << 15) | ((fn) << 12))
+
+#define XLP_IO_BRIDGE_OFFSET(node)     XLP_HDR_OFFSET(node, 0, 0, 0)
+/* coherent inter chip */
+#define XLP_IO_CIC0_OFFSET(node)       XLP_HDR_OFFSET(node, 0, 0, 1)
+#define XLP_IO_CIC1_OFFSET(node)       XLP_HDR_OFFSET(node, 0, 0, 2)
+#define XLP_IO_CIC2_OFFSET(node)       XLP_HDR_OFFSET(node, 0, 0, 3)
+#define XLP_IO_PIC_OFFSET(node)                XLP_HDR_OFFSET(node, 0, 0, 4)
+
+#define XLP_IO_PCIE_OFFSET(node, i)    XLP_HDR_OFFSET(node, 0, 1, i)
+#define XLP_IO_PCIE0_OFFSET(node)      XLP_HDR_OFFSET(node, 0, 1, 0)
+#define XLP_IO_PCIE1_OFFSET(node)      XLP_HDR_OFFSET(node, 0, 1, 1)
+#define XLP_IO_PCIE2_OFFSET(node)      XLP_HDR_OFFSET(node, 0, 1, 2)
+#define XLP_IO_PCIE3_OFFSET(node)      XLP_HDR_OFFSET(node, 0, 1, 3)
+
+#define XLP_IO_USB_OFFSET(node, i)     XLP_HDR_OFFSET(node, 0, 2, i)
+#define XLP_IO_USB_EHCI0_OFFSET(node)  XLP_HDR_OFFSET(node, 0, 2, 0)
+#define XLP_IO_USB_OHCI0_OFFSET(node)  XLP_HDR_OFFSET(node, 0, 2, 1)
+#define XLP_IO_USB_OHCI1_OFFSET(node)  XLP_HDR_OFFSET(node, 0, 2, 2)
+#define XLP_IO_USB_EHCI1_OFFSET(node)  XLP_HDR_OFFSET(node, 0, 2, 3)
+#define XLP_IO_USB_OHCI2_OFFSET(node)  XLP_HDR_OFFSET(node, 0, 2, 4)
+#define XLP_IO_USB_OHCI3_OFFSET(node)  XLP_HDR_OFFSET(node, 0, 2, 5)
+
+#define XLP_IO_NAE_OFFSET(node)                XLP_HDR_OFFSET(node, 0, 3, 0)
+#define XLP_IO_POE_OFFSET(node)                XLP_HDR_OFFSET(node, 0, 3, 1)
+
+#define XLP_IO_CMS_OFFSET(node)                XLP_HDR_OFFSET(node, 0, 4, 0)
+
+#define XLP_IO_DMA_OFFSET(node)                XLP_HDR_OFFSET(node, 0, 5, 1)
+#define XLP_IO_SEC_OFFSET(node)                XLP_HDR_OFFSET(node, 0, 5, 2)
+#define XLP_IO_CMP_OFFSET(node)                XLP_HDR_OFFSET(node, 0, 5, 3)
+
+#define XLP_IO_UART_OFFSET(node, i)    XLP_HDR_OFFSET(node, 0, 6, i)
+#define XLP_IO_UART0_OFFSET(node)      XLP_HDR_OFFSET(node, 0, 6, 0)
+#define XLP_IO_UART1_OFFSET(node)      XLP_HDR_OFFSET(node, 0, 6, 1)
+#define XLP_IO_I2C_OFFSET(node, i)     XLP_HDR_OFFSET(node, 0, 6, 2 + i)
+#define XLP_IO_I2C0_OFFSET(node)       XLP_HDR_OFFSET(node, 0, 6, 2)
+#define XLP_IO_I2C1_OFFSET(node)       XLP_HDR_OFFSET(node, 0, 6, 3)
+#define XLP_IO_GPIO_OFFSET(node)       XLP_HDR_OFFSET(node, 0, 6, 4)
+/* system management */
+#define XLP_IO_SYS_OFFSET(node)                XLP_HDR_OFFSET(node, 0, 6, 5)
+#define XLP_IO_JTAG_OFFSET(node)       XLP_HDR_OFFSET(node, 0, 6, 6)
+
+#define XLP_IO_NOR_OFFSET(node)                XLP_HDR_OFFSET(node, 0, 7, 0)
+#define XLP_IO_NAND_OFFSET(node)       XLP_HDR_OFFSET(node, 0, 7, 1)
+#define XLP_IO_SPI_OFFSET(node)                XLP_HDR_OFFSET(node, 0, 7, 2)
+/* SD flash */
+#define XLP_IO_SD_OFFSET(node)          XLP_HDR_OFFSET(node, 0, 7, 3)
+#define XLP_IO_MMC_OFFSET(node, slot)   \
+               ((XLP_IO_SD_OFFSET(node))+(slot*0x100)+XLP_IO_PCI_HDRSZ)
+
+/* PCI config header register id's */
+#define XLP_PCI_CFGREG0                        0x00
+#define XLP_PCI_CFGREG1                        0x01
+#define XLP_PCI_CFGREG2                        0x02
+#define XLP_PCI_CFGREG3                        0x03
+#define XLP_PCI_CFGREG4                        0x04
+#define XLP_PCI_CFGREG5                        0x05
+#define XLP_PCI_DEVINFO_REG0           0x30
+#define XLP_PCI_DEVINFO_REG1           0x31
+#define XLP_PCI_DEVINFO_REG2           0x32
+#define XLP_PCI_DEVINFO_REG3           0x33
+#define XLP_PCI_DEVINFO_REG4           0x34
+#define XLP_PCI_DEVINFO_REG5           0x35
+#define XLP_PCI_DEVINFO_REG6           0x36
+#define XLP_PCI_DEVINFO_REG7           0x37
+#define XLP_PCI_DEVSCRATCH_REG0                0x38
+#define XLP_PCI_DEVSCRATCH_REG1                0x39
+#define XLP_PCI_DEVSCRATCH_REG2                0x3a
+#define XLP_PCI_DEVSCRATCH_REG3                0x3b
+#define XLP_PCI_MSGSTN_REG             0x3c
+#define XLP_PCI_IRTINFO_REG            0x3d
+#define XLP_PCI_UCODEINFO_REG          0x3e
+#define XLP_PCI_SBB_WT_REG             0x3f
+
+/* PCI IDs for SoC device */
+#define        PCI_VENDOR_NETLOGIC             0x184e
+
+#define        PCI_DEVICE_ID_NLM_ROOT          0x1001
+#define        PCI_DEVICE_ID_NLM_ICI           0x1002
+#define        PCI_DEVICE_ID_NLM_PIC           0x1003
+#define        PCI_DEVICE_ID_NLM_PCIE          0x1004
+#define        PCI_DEVICE_ID_NLM_EHCI          0x1007
+#define        PCI_DEVICE_ID_NLM_ILK           0x1008
+#define        PCI_DEVICE_ID_NLM_NAE           0x1009
+#define        PCI_DEVICE_ID_NLM_POE           0x100A
+#define        PCI_DEVICE_ID_NLM_FMN           0x100B
+#define        PCI_DEVICE_ID_NLM_RAID          0x100D
+#define        PCI_DEVICE_ID_NLM_SAE           0x100D
+#define        PCI_DEVICE_ID_NLM_RSA           0x100E
+#define        PCI_DEVICE_ID_NLM_CMP           0x100F
+#define        PCI_DEVICE_ID_NLM_UART          0x1010
+#define        PCI_DEVICE_ID_NLM_I2C           0x1011
+#define        PCI_DEVICE_ID_NLM_NOR           0x1015
+#define        PCI_DEVICE_ID_NLM_NAND          0x1016
+#define        PCI_DEVICE_ID_NLM_MMC           0x1018
+
+#ifndef __ASSEMBLY__
+
+#define nlm_read_pci_reg(b, r)         nlm_read_reg(b, r)
+#define nlm_write_pci_reg(b, r, v)     nlm_write_reg(b, r, v)
+
+#endif /* !__ASSEMBLY */
+
+#endif /* __NLM_HAL_IOMAP_H__ */
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/pic.h b/arch/mips/include/asm/netlogic/xlp-hal/pic.h
new file mode 100644 (file)
index 0000000..b6628f7
--- /dev/null
@@ -0,0 +1,411 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _NLM_HAL_PIC_H
+#define _NLM_HAL_PIC_H
+
+/* PIC Specific registers */
+#define PIC_CTRL                0x00
+
+/* PIC control register defines */
+#define PIC_CTRL_ITV           32 /* interrupt timeout value */
+#define PIC_CTRL_ICI           19 /* ICI interrupt timeout enable */
+#define PIC_CTRL_ITE           18 /* interrupt timeout enable */
+#define PIC_CTRL_STE           10 /* system timer interrupt enable */
+#define PIC_CTRL_WWR1          8  /* watchdog 1 wraparound count for reset */
+#define PIC_CTRL_WWR0          6  /* watchdog 0 wraparound count for reset */
+#define PIC_CTRL_WWN1          4  /* watchdog 1 wraparound count for NMI */
+#define PIC_CTRL_WWN0          2  /* watchdog 0 wraparound count for NMI */
+#define PIC_CTRL_WTE           0  /* watchdog timer enable */
+
+/* PIC Status register defines */
+#define PIC_ICI_STATUS         33 /* ICI interrupt timeout status */
+#define PIC_ITE_STATUS         32 /* interrupt timeout status */
+#define PIC_STS_STATUS         4  /* System timer interrupt status */
+#define PIC_WNS_STATUS         2  /* NMI status for watchdog timers */
+#define PIC_WIS_STATUS         0  /* Interrupt status for watchdog timers */
+
+/* PIC IPI control register offsets */
+#define PIC_IPICTRL_NMI                32
+#define PIC_IPICTRL_RIV                20 /* received interrupt vector */
+#define PIC_IPICTRL_IDB                16 /* interrupt destination base */
+#define PIC_IPICTRL_DTE                 0 /* interrupt destination thread enables */
+
+/* PIC IRT register offsets */
+#define PIC_IRT_ENABLE         31
+#define PIC_IRT_NMI            29
+#define PIC_IRT_SCH            28 /* Scheduling scheme */
+#define PIC_IRT_RVEC           20 /* Interrupt receive vectors */
+#define PIC_IRT_DT             19 /* Destination type */
+#define PIC_IRT_DB             16 /* Destination base */
+#define PIC_IRT_DTE            0  /* Destination thread enables */
+
+#define PIC_BYTESWAP            0x02
+#define PIC_STATUS              0x04
+#define PIC_INTR_TIMEOUT       0x06
+#define PIC_ICI0_INTR_TIMEOUT  0x08
+#define PIC_ICI1_INTR_TIMEOUT  0x0a
+#define PIC_ICI2_INTR_TIMEOUT  0x0c
+#define PIC_IPI_CTL            0x0e
+#define PIC_INT_ACK             0x10
+#define PIC_INT_PENDING0        0x12
+#define PIC_INT_PENDING1        0x14
+#define PIC_INT_PENDING2        0x16
+
+#define PIC_WDOG0_MAXVAL        0x18
+#define PIC_WDOG0_COUNT         0x1a
+#define PIC_WDOG0_ENABLE0       0x1c
+#define PIC_WDOG0_ENABLE1       0x1e
+#define PIC_WDOG0_BEATCMD       0x20
+#define PIC_WDOG0_BEAT0         0x22
+#define PIC_WDOG0_BEAT1         0x24
+
+#define PIC_WDOG1_MAXVAL        0x26
+#define PIC_WDOG1_COUNT         0x28
+#define PIC_WDOG1_ENABLE0       0x2a
+#define PIC_WDOG1_ENABLE1       0x2c
+#define PIC_WDOG1_BEATCMD       0x2e
+#define PIC_WDOG1_BEAT0         0x30
+#define PIC_WDOG1_BEAT1         0x32
+
+#define PIC_WDOG_MAXVAL(i)      (PIC_WDOG0_MAXVAL + ((i) ? 7 : 0))
+#define PIC_WDOG_COUNT(i)       (PIC_WDOG0_COUNT + ((i) ? 7 : 0))
+#define PIC_WDOG_ENABLE0(i)     (PIC_WDOG0_ENABLE0 + ((i) ? 7 : 0))
+#define PIC_WDOG_ENABLE1(i)     (PIC_WDOG0_ENABLE1 + ((i) ? 7 : 0))
+#define PIC_WDOG_BEATCMD(i)     (PIC_WDOG0_BEATCMD + ((i) ? 7 : 0))
+#define PIC_WDOG_BEAT0(i)       (PIC_WDOG0_BEAT0 + ((i) ? 7 : 0))
+#define PIC_WDOG_BEAT1(i)       (PIC_WDOG0_BEAT1 + ((i) ? 7 : 0))
+
+#define PIC_TIMER0_MAXVAL    0x34
+#define PIC_TIMER1_MAXVAL    0x36
+#define PIC_TIMER2_MAXVAL    0x38
+#define PIC_TIMER3_MAXVAL    0x3a
+#define PIC_TIMER4_MAXVAL    0x3c
+#define PIC_TIMER5_MAXVAL    0x3e
+#define PIC_TIMER6_MAXVAL    0x40
+#define PIC_TIMER7_MAXVAL    0x42
+#define PIC_TIMER_MAXVAL(i)  (PIC_TIMER0_MAXVAL + ((i) * 2))
+
+#define PIC_TIMER0_COUNT     0x44
+#define PIC_TIMER1_COUNT     0x46
+#define PIC_TIMER2_COUNT     0x48
+#define PIC_TIMER3_COUNT     0x4a
+#define PIC_TIMER4_COUNT     0x4c
+#define PIC_TIMER5_COUNT     0x4e
+#define PIC_TIMER6_COUNT     0x50
+#define PIC_TIMER7_COUNT     0x52
+#define PIC_TIMER_COUNT(i)   (PIC_TIMER0_COUNT + ((i) * 2))
+
+#define PIC_ITE0_N0_N1          0x54
+#define PIC_ITE1_N0_N1          0x58
+#define PIC_ITE2_N0_N1          0x5c
+#define PIC_ITE3_N0_N1          0x60
+#define PIC_ITE4_N0_N1          0x64
+#define PIC_ITE5_N0_N1          0x68
+#define PIC_ITE6_N0_N1          0x6c
+#define PIC_ITE7_N0_N1          0x70
+#define PIC_ITE_N0_N1(i)        (PIC_ITE0_N0_N1 + ((i) * 4))
+
+#define PIC_ITE0_N2_N3          0x56
+#define PIC_ITE1_N2_N3          0x5a
+#define PIC_ITE2_N2_N3          0x5e
+#define PIC_ITE3_N2_N3          0x62
+#define PIC_ITE4_N2_N3          0x66
+#define PIC_ITE5_N2_N3          0x6a
+#define PIC_ITE6_N2_N3          0x6e
+#define PIC_ITE7_N2_N3          0x72
+#define PIC_ITE_N2_N3(i)        (PIC_ITE0_N2_N3 + ((i) * 4))
+
+#define PIC_IRT0                0x74
+#define PIC_IRT(i)              (PIC_IRT0 + ((i) * 2))
+
+#define TIMER_CYCLES_MAXVAL    0xffffffffffffffffULL
+
+/*
+ *    IRT Map
+ */
+#define PIC_NUM_IRTS           160
+
+#define PIC_IRT_WD_0_INDEX     0
+#define PIC_IRT_WD_1_INDEX     1
+#define PIC_IRT_WD_NMI_0_INDEX 2
+#define PIC_IRT_WD_NMI_1_INDEX 3
+#define PIC_IRT_TIMER_0_INDEX  4
+#define PIC_IRT_TIMER_1_INDEX  5
+#define PIC_IRT_TIMER_2_INDEX  6
+#define PIC_IRT_TIMER_3_INDEX  7
+#define PIC_IRT_TIMER_4_INDEX  8
+#define PIC_IRT_TIMER_5_INDEX  9
+#define PIC_IRT_TIMER_6_INDEX  10
+#define PIC_IRT_TIMER_7_INDEX  11
+#define PIC_IRT_CLOCK_INDEX    PIC_IRT_TIMER_7_INDEX
+#define PIC_IRT_TIMER_INDEX(num)       ((num) + PIC_IRT_TIMER_0_INDEX)
+
+
+/* 11 and 12 */
+#define PIC_NUM_MSG_Q_IRTS     32
+#define PIC_IRT_MSG_Q0_INDEX   12
+#define PIC_IRT_MSG_Q_INDEX(qid)       ((qid) + PIC_IRT_MSG_Q0_INDEX)
+/* 12 to 43 */
+#define PIC_IRT_MSG_0_INDEX    44
+#define PIC_IRT_MSG_1_INDEX    45
+/* 44 and 45 */
+#define PIC_NUM_PCIE_MSIX_IRTS 32
+#define PIC_IRT_PCIE_MSIX_0_INDEX      46
+#define PIC_IRT_PCIE_MSIX_INDEX(num)   ((num) + PIC_IRT_PCIE_MSIX_0_INDEX)
+/* 46 to 77 */
+#define PIC_NUM_PCIE_LINK_IRTS         4
+#define PIC_IRT_PCIE_LINK_0_INDEX      78
+#define PIC_IRT_PCIE_LINK_1_INDEX      79
+#define PIC_IRT_PCIE_LINK_2_INDEX      80
+#define PIC_IRT_PCIE_LINK_3_INDEX      81
+#define PIC_IRT_PCIE_LINK_INDEX(num)   ((num) + PIC_IRT_PCIE_LINK_0_INDEX)
+/* 78 to 81 */
+#define PIC_NUM_NA_IRTS                        32
+/* 82 to 113 */
+#define PIC_IRT_NA_0_INDEX             82
+#define PIC_IRT_NA_INDEX(num)          ((num) + PIC_IRT_NA_0_INDEX)
+#define PIC_IRT_POE_INDEX              114
+
+#define PIC_NUM_USB_IRTS               6
+#define PIC_IRT_USB_0_INDEX            115
+#define PIC_IRT_EHCI_0_INDEX           115
+#define PIC_IRT_EHCI_1_INDEX           118
+#define PIC_IRT_USB_INDEX(num)         ((num) + PIC_IRT_USB_0_INDEX)
+/* 115 to 120 */
+#define PIC_IRT_GDX_INDEX              121
+#define PIC_IRT_SEC_INDEX              122
+#define PIC_IRT_RSA_INDEX              123
+
+#define PIC_NUM_COMP_IRTS              4
+#define PIC_IRT_COMP_0_INDEX           124
+#define PIC_IRT_COMP_INDEX(num)                ((num) + PIC_IRT_COMP_0_INDEX)
+/* 124 to 127 */
+#define PIC_IRT_GBU_INDEX              128
+#define PIC_IRT_ICC_0_INDEX            129 /* ICC - Inter Chip Coherency */
+#define PIC_IRT_ICC_1_INDEX            130
+#define PIC_IRT_ICC_2_INDEX            131
+#define PIC_IRT_CAM_INDEX              132
+#define PIC_IRT_UART_0_INDEX           133
+#define PIC_IRT_UART_1_INDEX           134
+#define PIC_IRT_I2C_0_INDEX            135
+#define PIC_IRT_I2C_1_INDEX            136
+#define PIC_IRT_SYS_0_INDEX            137
+#define PIC_IRT_SYS_1_INDEX            138
+#define PIC_IRT_JTAG_INDEX             139
+#define PIC_IRT_PIC_INDEX              140
+#define PIC_IRT_NBU_INDEX              141
+#define PIC_IRT_TCU_INDEX              142
+#define PIC_IRT_GCU_INDEX              143 /* GBC - Global Coherency */
+#define PIC_IRT_DMC_0_INDEX            144
+#define PIC_IRT_DMC_1_INDEX            145
+
+#define PIC_NUM_GPIO_IRTS              4
+#define PIC_IRT_GPIO_0_INDEX           146
+#define PIC_IRT_GPIO_INDEX(num)                ((num) + PIC_IRT_GPIO_0_INDEX)
+
+/* 146 to 149 */
+#define PIC_IRT_NOR_INDEX              150
+#define PIC_IRT_NAND_INDEX             151
+#define PIC_IRT_SPI_INDEX              152
+#define PIC_IRT_MMC_INDEX              153
+
+#define PIC_CLOCK_TIMER                        7
+#define PIC_IRQ_BASE                   8
+
+#if !defined(LOCORE) && !defined(__ASSEMBLY__)
+
+#define PIC_IRT_FIRST_IRQ              (PIC_IRQ_BASE)
+#define PIC_IRT_LAST_IRQ               63
+#define PIC_IRQ_IS_IRT(irq)            ((irq) >= PIC_IRT_FIRST_IRQ)
+
+/*
+ *   Misc
+ */
+#define PIC_IRT_VALID                  1
+#define PIC_LOCAL_SCHEDULING           1
+#define PIC_GLOBAL_SCHEDULING          0
+
+#define nlm_read_pic_reg(b, r) nlm_read_reg64(b, r)
+#define nlm_write_pic_reg(b, r, v) nlm_write_reg64(b, r, v)
+#define nlm_get_pic_pcibase(node) nlm_pcicfg_base(XLP_IO_PIC_OFFSET(node))
+#define nlm_get_pic_regbase(node) (nlm_get_pic_pcibase(node) + XLP_IO_PCI_HDRSZ)
+
+/* IRT and h/w interrupt routines */
+static inline int
+nlm_pic_read_irt(uint64_t base, int irt_index)
+{
+       return nlm_read_pic_reg(base, PIC_IRT(irt_index));
+}
+
+static inline uint64_t
+nlm_pic_read_control(uint64_t base)
+{
+       return nlm_read_pic_reg(base, PIC_CTRL);
+}
+
+static inline void
+nlm_pic_write_control(uint64_t base, uint64_t control)
+{
+       nlm_write_pic_reg(base, PIC_CTRL, control);
+}
+
+static inline void
+nlm_pic_update_control(uint64_t base, uint64_t control)
+{
+       uint64_t val;
+
+       val = nlm_read_pic_reg(base, PIC_CTRL);
+       nlm_write_pic_reg(base, PIC_CTRL, control | val);
+}
+
+static inline void
+nlm_set_irt_to_cpu(uint64_t base, int irt, int cpu)
+{
+       uint64_t val;
+
+       val = nlm_read_pic_reg(base, PIC_IRT(irt));
+       val |= cpu & 0xf;
+       if (cpu > 15)
+               val |= 1 << 16;
+       nlm_write_pic_reg(base, PIC_IRT(irt), val);
+}
+
+static inline void
+nlm_pic_write_irt(uint64_t base, int irt_num, int en, int nmi,
+       int sch, int vec, int dt, int db, int dte)
+{
+       uint64_t val;
+
+       val = (((uint64_t)en & 0x1) << 31) | ((nmi & 0x1) << 29) |
+                       ((sch & 0x1) << 28) | ((vec & 0x3f) << 20) |
+                       ((dt & 0x1) << 19) | ((db & 0x7) << 16) |
+                       (dte & 0xffff);
+
+       nlm_write_pic_reg(base, PIC_IRT(irt_num), val);
+}
+
+static inline void
+nlm_pic_write_irt_direct(uint64_t base, int irt_num, int en, int nmi,
+       int sch, int vec, int cpu)
+{
+       nlm_pic_write_irt(base, irt_num, en, nmi, sch, vec, 1,
+               (cpu >> 4),             /* thread group */
+               1 << (cpu & 0xf));      /* thread mask */
+}
+
+static inline uint64_t
+nlm_pic_read_timer(uint64_t base, int timer)
+{
+       return nlm_read_pic_reg(base, PIC_TIMER_COUNT(timer));
+}
+
+static inline void
+nlm_pic_write_timer(uint64_t base, int timer, uint64_t value)
+{
+       nlm_write_pic_reg(base, PIC_TIMER_COUNT(timer), value);
+}
+
+static inline void
+nlm_pic_set_timer(uint64_t base, int timer, uint64_t value, int irq, int cpu)
+{
+       uint64_t pic_ctrl = nlm_read_pic_reg(base, PIC_CTRL);
+       int en;
+
+       en = (irq > 0);
+       nlm_write_pic_reg(base, PIC_TIMER_MAXVAL(timer), value);
+       nlm_pic_write_irt_direct(base, PIC_IRT_TIMER_INDEX(timer),
+               en, 0, 0, irq, cpu);
+
+       /* enable the timer */
+       pic_ctrl |= (1 << (PIC_CTRL_STE + timer));
+       nlm_write_pic_reg(base, PIC_CTRL, pic_ctrl);
+}
+
+static inline void
+nlm_pic_enable_irt(uint64_t base, int irt)
+{
+       uint64_t reg;
+
+       reg = nlm_read_pic_reg(base, PIC_IRT(irt));
+       nlm_write_pic_reg(base, PIC_IRT(irt), reg | (1u << 31));
+}
+
+static inline void
+nlm_pic_disable_irt(uint64_t base, int irt)
+{
+       uint32_t reg;
+
+       reg = nlm_read_pic_reg(base, PIC_IRT(irt));
+       nlm_write_pic_reg(base, PIC_IRT(irt), reg & ~((uint64_t)1 << 31));
+}
+
+static inline void
+nlm_pic_send_ipi(uint64_t base, int hwt, int irq, int nmi)
+{
+       uint64_t ipi;
+       int     node, ncpu;
+
+       node = hwt / 32;
+       ncpu = hwt & 0x1f;
+       ipi = ((uint64_t)nmi << 31) | (irq << 20) | (node << 17) |
+               (1 << (ncpu & 0xf));
+       if (ncpu > 15)
+               ipi |= 0x10000; /* Setting bit 16 to select cpus 16-31 */
+
+       nlm_write_pic_reg(base, PIC_IPI_CTL, ipi);
+}
+
+static inline void
+nlm_pic_ack(uint64_t base, int irt_num)
+{
+       nlm_write_pic_reg(base, PIC_INT_ACK, irt_num);
+
+       /* Ack the Status register for Watchdog & System timers */
+       if (irt_num < 12)
+               nlm_write_pic_reg(base, PIC_STATUS, (1 << irt_num));
+}
+
+static inline void
+nlm_pic_init_irt(uint64_t base, int irt, int irq, int hwt)
+{
+       nlm_pic_write_irt_direct(base, irt, 0, 0, 0, irq, 0);
+}
+
+extern uint64_t nlm_pic_base;
+int nlm_irq_to_irt(int irq);
+int nlm_irt_to_irq(int irt);
+
+#endif /* __ASSEMBLY__ */
+#endif /* _NLM_HAL_PIC_H */
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/sys.h b/arch/mips/include/asm/netlogic/xlp-hal/sys.h
new file mode 100644 (file)
index 0000000..21432f7
--- /dev/null
@@ -0,0 +1,129 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __NLM_HAL_SYS_H__
+#define __NLM_HAL_SYS_H__
+
+/**
+* @file_name sys.h
+* @author Netlogic Microsystems
+* @brief HAL for System configuration registers
+*/
+#define        SYS_CHIP_RESET                          0x00
+#define        SYS_POWER_ON_RESET_CFG                  0x01
+#define        SYS_EFUSE_DEVICE_CFG_STATUS0            0x02
+#define        SYS_EFUSE_DEVICE_CFG_STATUS1            0x03
+#define        SYS_EFUSE_DEVICE_CFG_STATUS2            0x04
+#define        SYS_EFUSE_DEVICE_CFG3                   0x05
+#define        SYS_EFUSE_DEVICE_CFG4                   0x06
+#define        SYS_EFUSE_DEVICE_CFG5                   0x07
+#define        SYS_EFUSE_DEVICE_CFG6                   0x08
+#define        SYS_EFUSE_DEVICE_CFG7                   0x09
+#define        SYS_PLL_CTRL                            0x0a
+#define        SYS_CPU_RESET                           0x0b
+#define        SYS_CPU_NONCOHERENT_MODE                0x0d
+#define        SYS_CORE_DFS_DIS_CTRL                   0x0e
+#define        SYS_CORE_DFS_RST_CTRL                   0x0f
+#define        SYS_CORE_DFS_BYP_CTRL                   0x10
+#define        SYS_CORE_DFS_PHA_CTRL                   0x11
+#define        SYS_CORE_DFS_DIV_INC_CTRL               0x12
+#define        SYS_CORE_DFS_DIV_DEC_CTRL               0x13
+#define        SYS_CORE_DFS_DIV_VALUE                  0x14
+#define        SYS_RESET                               0x15
+#define        SYS_DFS_DIS_CTRL                        0x16
+#define        SYS_DFS_RST_CTRL                        0x17
+#define        SYS_DFS_BYP_CTRL                        0x18
+#define        SYS_DFS_DIV_INC_CTRL                    0x19
+#define        SYS_DFS_DIV_DEC_CTRL                    0x1a
+#define        SYS_DFS_DIV_VALUE0                      0x1b
+#define        SYS_DFS_DIV_VALUE1                      0x1c
+#define        SYS_SENSE_AMP_DLY                       0x1d
+#define        SYS_SOC_SENSE_AMP_DLY                   0x1e
+#define        SYS_CTRL0                               0x1f
+#define        SYS_CTRL1                               0x20
+#define        SYS_TIMEOUT_BS1                         0x21
+#define        SYS_BYTE_SWAP                           0x22
+#define        SYS_VRM_VID                             0x23
+#define        SYS_PWR_RAM_CMD                         0x24
+#define        SYS_PWR_RAM_ADDR                        0x25
+#define        SYS_PWR_RAM_DATA0                       0x26
+#define        SYS_PWR_RAM_DATA1                       0x27
+#define        SYS_PWR_RAM_DATA2                       0x28
+#define        SYS_PWR_UCODE                           0x29
+#define        SYS_CPU0_PWR_STATUS                     0x2a
+#define        SYS_CPU1_PWR_STATUS                     0x2b
+#define        SYS_CPU2_PWR_STATUS                     0x2c
+#define        SYS_CPU3_PWR_STATUS                     0x2d
+#define        SYS_CPU4_PWR_STATUS                     0x2e
+#define        SYS_CPU5_PWR_STATUS                     0x2f
+#define        SYS_CPU6_PWR_STATUS                     0x30
+#define        SYS_CPU7_PWR_STATUS                     0x31
+#define        SYS_STATUS                              0x32
+#define        SYS_INT_POL                             0x33
+#define        SYS_INT_TYPE                            0x34
+#define        SYS_INT_STATUS                          0x35
+#define        SYS_INT_MASK0                           0x36
+#define        SYS_INT_MASK1                           0x37
+#define        SYS_UCO_S_ECC                           0x38
+#define        SYS_UCO_M_ECC                           0x39
+#define        SYS_UCO_ADDR                            0x3a
+#define        SYS_UCO_INSTR                           0x3b
+#define        SYS_MEM_BIST0                           0x3c
+#define        SYS_MEM_BIST1                           0x3d
+#define        SYS_MEM_BIST2                           0x3e
+#define        SYS_MEM_BIST3                           0x3f
+#define        SYS_MEM_BIST4                           0x40
+#define        SYS_MEM_BIST5                           0x41
+#define        SYS_MEM_BIST6                           0x42
+#define        SYS_MEM_BIST7                           0x43
+#define        SYS_MEM_BIST8                           0x44
+#define        SYS_MEM_BIST9                           0x45
+#define        SYS_MEM_BIST10                          0x46
+#define        SYS_MEM_BIST11                          0x47
+#define        SYS_MEM_BIST12                          0x48
+#define        SYS_SCRTCH0                             0x49
+#define        SYS_SCRTCH1                             0x4a
+#define        SYS_SCRTCH2                             0x4b
+#define        SYS_SCRTCH3                             0x4c
+
+#ifndef __ASSEMBLY__
+
+#define        nlm_read_sys_reg(b, r)          nlm_read_reg(b, r)
+#define        nlm_write_sys_reg(b, r, v)      nlm_write_reg(b, r, v)
+#define        nlm_get_sys_pcibase(node) nlm_pcicfg_base(XLP_IO_SYS_OFFSET(node))
+#define        nlm_get_sys_regbase(node) (nlm_get_sys_pcibase(node) + XLP_IO_PCI_HDRSZ)
+
+extern uint64_t nlm_sys_base;
+#endif
+#endif
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/uart.h b/arch/mips/include/asm/netlogic/xlp-hal/uart.h
new file mode 100644 (file)
index 0000000..6a7046c
--- /dev/null
@@ -0,0 +1,191 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __XLP_HAL_UART_H__
+#define __XLP_HAL_UART_H__
+
+/* UART Specific registers */
+#define UART_RX_DATA           0x00
+#define UART_TX_DATA           0x00
+
+#define UART_INT_EN            0x01
+#define UART_INT_ID            0x02
+#define UART_FIFO_CTL          0x02
+#define UART_LINE_CTL          0x03
+#define UART_MODEM_CTL         0x04
+#define UART_LINE_STS          0x05
+#define UART_MODEM_STS         0x06
+
+#define UART_DIVISOR0          0x00
+#define UART_DIVISOR1          0x01
+
+#define BASE_BAUD              (XLP_IO_CLK/16)
+#define BAUD_DIVISOR(baud)     (BASE_BAUD / baud)
+
+/* LCR mask values */
+#define LCR_5BITS              0x00
+#define LCR_6BITS              0x01
+#define LCR_7BITS              0x02
+#define LCR_8BITS              0x03
+#define LCR_STOPB              0x04
+#define LCR_PENAB              0x08
+#define LCR_PODD               0x00
+#define LCR_PEVEN              0x10
+#define LCR_PONE               0x20
+#define LCR_PZERO              0x30
+#define LCR_SBREAK             0x40
+#define LCR_EFR_ENABLE         0xbf
+#define LCR_DLAB               0x80
+
+/* MCR mask values */
+#define MCR_DTR                        0x01
+#define MCR_RTS                        0x02
+#define MCR_DRS                        0x04
+#define MCR_IE                 0x08
+#define MCR_LOOPBACK           0x10
+
+/* FCR mask values */
+#define FCR_RCV_RST            0x02
+#define FCR_XMT_RST            0x04
+#define FCR_RX_LOW             0x00
+#define FCR_RX_MEDL            0x40
+#define FCR_RX_MEDH            0x80
+#define FCR_RX_HIGH            0xc0
+
+/* IER mask values */
+#define IER_ERXRDY             0x1
+#define IER_ETXRDY             0x2
+#define IER_ERLS               0x4
+#define IER_EMSC               0x8
+
+#if !defined(LOCORE) && !defined(__ASSEMBLY__)
+
+#define        nlm_read_uart_reg(b, r)         nlm_read_reg(b, r)
+#define        nlm_write_uart_reg(b, r, v)     nlm_write_reg(b, r, v)
+#define nlm_get_uart_pcibase(node, inst)       \
+               nlm_pcicfg_base(XLP_IO_UART_OFFSET(node, inst))
+#define nlm_get_uart_regbase(node, inst)       \
+                       (nlm_get_uart_pcibase(node, inst) + XLP_IO_PCI_HDRSZ)
+
+static inline void
+nlm_uart_set_baudrate(uint64_t base, int baud)
+{
+       uint32_t lcr;
+
+       lcr = nlm_read_uart_reg(base, UART_LINE_CTL);
+
+       /* enable divisor register, and write baud values */
+       nlm_write_uart_reg(base, UART_LINE_CTL, lcr | (1 << 7));
+       nlm_write_uart_reg(base, UART_DIVISOR0,
+                       (BAUD_DIVISOR(baud) & 0xff));
+       nlm_write_uart_reg(base, UART_DIVISOR1,
+                       ((BAUD_DIVISOR(baud) >> 8) & 0xff));
+
+       /* restore default lcr */
+       nlm_write_uart_reg(base, UART_LINE_CTL, lcr);
+}
+
+static inline void
+nlm_uart_outbyte(uint64_t base, char c)
+{
+       uint32_t lsr;
+
+       for (;;) {
+               lsr = nlm_read_uart_reg(base, UART_LINE_STS);
+               if (lsr & 0x20)
+                       break;
+       }
+
+       nlm_write_uart_reg(base, UART_TX_DATA, (int)c);
+}
+
+static inline char
+nlm_uart_inbyte(uint64_t base)
+{
+       int data, lsr;
+
+       for (;;) {
+               lsr = nlm_read_uart_reg(base, UART_LINE_STS);
+               if (lsr & 0x80) { /* parity/frame/break-error - push a zero */
+                       data = 0;
+                       break;
+               }
+               if (lsr & 0x01) {       /* Rx data */
+                       data = nlm_read_uart_reg(base, UART_RX_DATA);
+                       break;
+               }
+       }
+
+       return (char)data;
+}
+
+static inline int
+nlm_uart_init(uint64_t base, int baud, int databits, int stopbits,
+       int parity, int int_en, int loopback)
+{
+       uint32_t lcr;
+
+       lcr = 0;
+       if (databits >= 8)
+               lcr |= LCR_8BITS;
+       else if (databits == 7)
+               lcr |= LCR_7BITS;
+       else if (databits == 6)
+               lcr |= LCR_6BITS;
+       else
+               lcr |= LCR_5BITS;
+
+       if (stopbits > 1)
+               lcr |= LCR_STOPB;
+
+       lcr |= parity << 3;
+
+       /* setup default lcr */
+       nlm_write_uart_reg(base, UART_LINE_CTL, lcr);
+
+       /* Reset the FIFOs */
+       nlm_write_uart_reg(base, UART_LINE_CTL, FCR_RCV_RST | FCR_XMT_RST);
+
+       nlm_uart_set_baudrate(base, baud);
+
+       if (loopback)
+               nlm_write_uart_reg(base, UART_MODEM_CTL, 0x1f);
+
+       if (int_en)
+               nlm_write_uart_reg(base, UART_INT_EN, IER_ERXRDY | IER_ETXRDY);
+
+       return 0;
+}
+#endif /* !LOCORE && !__ASSEMBLY__ */
+#endif /* __XLP_HAL_UART_H__ */
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/xlp.h b/arch/mips/include/asm/netlogic/xlp-hal/xlp.h
new file mode 100644 (file)
index 0000000..aae23f1
--- /dev/null
@@ -0,0 +1,54 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _NLM_HAL_XLP_H
+#define _NLM_HAL_XLP_H
+
+#define        RESET_VEC_PHYS          0x1fc00000
+#define        RESET_DATA_PHYS         (RESET_VEC_PHYS + (1<<10))
+#define        BOOT_THREAD_MODE        0
+
+#define PIC_UART_0_IRQ           17
+#define PIC_UART_1_IRQ           18
+
+#ifndef __ASSEMBLY__
+
+/* SMP support functions */
+void nlm_boot_core0_siblings(void);
+
+void xlp_mmu_init(void);
+void nlm_hal_init(void);
+
+#endif /* !__ASSEMBLY__ */
+#endif /* _ASM_NLM_XLP_H */
index 28c8fa7a850325aac2208a1fff4d9d5207ce4aad..f193f7b3bd81ce15b23c80fb6acce438be838649 100644 (file)
 #include <asm/mipsregs.h>
 #include <asm/netlogic/haldefs.h>
 
+#if defined(CONFIG_CPU_XLP)
+#include <asm/netlogic/xlp-hal/iomap.h>
+#include <asm/netlogic/xlp-hal/uart.h>
+#elif defined(CONFIG_CPU_XLR)
 #include <asm/netlogic/xlr/iomap.h>
+#endif
 
 void prom_putchar(char c)
 {
        uint64_t uartbase;
 
+#if defined(CONFIG_CPU_XLP)
+       uartbase = nlm_get_uart_regbase(0, 0);
+#elif defined(CONFIG_CPU_XLR)
        uartbase = nlm_mmio_base(NETLOGIC_IO_UART_0_OFFSET);
+#endif
        while (nlm_read_reg(uartbase, UART_LSR) == 0)
                ;
        nlm_write_reg(uartbase, UART_TX, c);
index dd0dd626cc8f991e18c7bc6ffd660920487fe601..49a4f6cf71e537d5658eb24878ce8e89a8064995 100644 (file)
 #include <asm/netlogic/haldefs.h>
 #include <asm/netlogic/common.h>
 
+#if defined(CONFIG_CPU_XLP)
+#include <asm/netlogic/xlp-hal/iomap.h>
+#include <asm/netlogic/xlp-hal/xlp.h>
+#include <asm/netlogic/xlp-hal/pic.h>
+#elif defined(CONFIG_CPU_XLR)
 #include <asm/netlogic/xlr/iomap.h>
 #include <asm/netlogic/xlr/pic.h>
+#else
+#error "Unknown CPU"
+#endif
 /*
  * These are the routines that handle all the low level interrupt stuff.
  * Actions handled here are: initialization of the interrupt map, requesting of
index 3b32c834d14cfa141894df3313fe2f8260a82145..c1960439f7e14193c012e1933df2acd09c24aba8 100644 (file)
 #include <asm/netlogic/haldefs.h>
 #include <asm/netlogic/common.h>
 
+#if defined(CONFIG_CPU_XLP)
+#include <asm/netlogic/xlp-hal/iomap.h>
+#include <asm/netlogic/xlp-hal/pic.h>
+#elif defined(CONFIG_CPU_XLR)
 #include <asm/netlogic/xlr/iomap.h>
 #include <asm/netlogic/xlr/pic.h>
+#else
+#error "Unknown CPU"
+#endif
 
 void nlm_send_ipi_single(int logical_cpu, unsigned int action)
 {
@@ -70,15 +77,15 @@ void nlm_send_ipi_mask(const struct cpumask *mask, unsigned int action)
 /* IRQ_IPI_SMP_FUNCTION Handler */
 void nlm_smp_function_ipi_handler(unsigned int irq, struct irq_desc *desc)
 {
-       smp_call_function_interrupt();
        write_c0_eirr(1ull << irq);
+       smp_call_function_interrupt();
 }
 
 /* IRQ_IPI_SMP_RESCHEDULE  handler */
 void nlm_smp_resched_ipi_handler(unsigned int irq, struct irq_desc *desc)
 {
-       scheduler_ipi();
        write_c0_eirr(1ull << irq);
+       scheduler_ipi();
 }
 
 /*
@@ -86,9 +93,10 @@ void nlm_smp_resched_ipi_handler(unsigned int irq, struct irq_desc *desc)
  */
 void nlm_early_init_secondary(int cpu)
 {
+       change_c0_config(CONF_CM_CMASK, 0x3);
        write_c0_ebase((uint32_t)nlm_common_ebase);
-#ifdef NLM_XLP
-       if (cpu % 4 == 0)
+#ifdef CONFIG_CPU_XLP
+       if (hard_smp_processor_id() % 4 == 0)
                xlp_mmu_init();
 #endif
 }
diff --git a/arch/mips/netlogic/xlp/nlm_hal.c b/arch/mips/netlogic/xlp/nlm_hal.c
new file mode 100644 (file)
index 0000000..885f687
--- /dev/null
@@ -0,0 +1,105 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+
+#include <asm/mipsregs.h>
+#include <asm/time.h>
+
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/xlp-hal/iomap.h>
+#include <asm/netlogic/xlp-hal/xlp.h>
+#include <asm/netlogic/xlp-hal/pic.h>
+#include <asm/netlogic/xlp-hal/sys.h>
+
+/* These addresses are computed by the nlm_hal_init() */
+uint64_t nlm_io_base;
+uint64_t nlm_sys_base;
+uint64_t nlm_pic_base;
+
+/* Main initialization */
+void nlm_hal_init(void)
+{
+       nlm_io_base = CKSEG1ADDR(XLP_DEFAULT_IO_BASE);
+       nlm_sys_base = nlm_get_sys_regbase(0);  /* node 0 */
+       nlm_pic_base = nlm_get_pic_regbase(0);  /* node 0 */
+}
+
+int nlm_irq_to_irt(int irq)
+{
+       if (!PIC_IRQ_IS_IRT(irq))
+               return -1;
+
+       switch (irq) {
+       case PIC_UART_0_IRQ:
+               return PIC_IRT_UART_0_INDEX;
+       case PIC_UART_1_IRQ:
+               return PIC_IRT_UART_1_INDEX;
+       default:
+               return -1;
+       }
+}
+
+int nlm_irt_to_irq(int irt)
+{
+       switch (irt) {
+       case PIC_IRT_UART_0_INDEX:
+               return PIC_UART_0_IRQ;
+       case PIC_IRT_UART_1_INDEX:
+               return PIC_UART_1_IRQ;
+       default:
+               return -1;
+       }
+}
+
+unsigned int nlm_get_cpu_frequency(void)
+{
+       unsigned int pll_divf, pll_divr, dfs_div, denom;
+       unsigned int val;
+       uint64_t num;
+
+       val = nlm_read_sys_reg(nlm_sys_base, SYS_POWER_ON_RESET_CFG);
+       pll_divf = (val >> 10) & 0x7f;
+       pll_divr = (val >> 8)  & 0x3;
+       dfs_div  = (val >> 17) & 0x3;
+
+       num = pll_divf + 1;
+       denom = 3 * (pll_divr + 1) * (1 << (dfs_div + 1));
+       num = num * 800000000ULL;
+       do_div(num, denom);
+       return (unsigned int)num;
+}
diff --git a/arch/mips/netlogic/xlp/platform.c b/arch/mips/netlogic/xlp/platform.c
new file mode 100644 (file)
index 0000000..1f5e4cb
--- /dev/null
@@ -0,0 +1,108 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/pci.h>
+#include <linux/serial_reg.h>
+#include <linux/spinlock.h>
+
+#include <asm/time.h>
+#include <asm/addrspace.h>
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/xlp-hal/iomap.h>
+#include <asm/netlogic/xlp-hal/xlp.h>
+#include <asm/netlogic/xlp-hal/pic.h>
+#include <asm/netlogic/xlp-hal/uart.h>
+
+static unsigned int nlm_xlp_uart_in(struct uart_port *p, int offset)
+{
+        return nlm_read_reg(p->iobase, offset);
+}
+
+static void nlm_xlp_uart_out(struct uart_port *p, int offset, int value)
+{
+       nlm_write_reg(p->iobase, offset, value);
+}
+
+#define PORT(_irq)                                     \
+       {                                               \
+               .irq            = _irq,                 \
+               .regshift       = 2,                    \
+               .iotype         = UPIO_MEM32,           \
+               .flags          = (UPF_SKIP_TEST|UPF_FIXED_TYPE|\
+                                       UPF_BOOT_AUTOCONF),     \
+               .uartclk        = XLP_IO_CLK,           \
+               .type           = PORT_16550A,          \
+               .serial_in      = nlm_xlp_uart_in,      \
+               .serial_out     = nlm_xlp_uart_out,     \
+       }
+
+static struct plat_serial8250_port xlp_uart_data[] = {
+       PORT(PIC_UART_0_IRQ),
+       PORT(PIC_UART_1_IRQ),
+       {},
+};
+
+static struct platform_device uart_device = {
+       .name           = "serial8250",
+       .id             = PLAT8250_DEV_PLATFORM,
+       .dev = {
+               .platform_data = xlp_uart_data,
+       },
+};
+
+static int __init nlm_platform_uart_init(void)
+{
+       unsigned long mmio;
+
+       mmio = (unsigned long)nlm_get_uart_regbase(0, 0);
+       xlp_uart_data[0].iobase = mmio;
+       xlp_uart_data[0].membase = (void __iomem *)mmio;
+       xlp_uart_data[0].mapbase = mmio;
+
+       mmio = (unsigned long)nlm_get_uart_regbase(0, 1);
+       xlp_uart_data[1].iobase = mmio;
+       xlp_uart_data[1].membase = (void __iomem *)mmio;
+       xlp_uart_data[1].mapbase = mmio;
+
+       return platform_device_register(&uart_device);
+}
+
+arch_initcall(nlm_platform_uart_init);
diff --git a/arch/mips/netlogic/xlp/setup.c b/arch/mips/netlogic/xlp/setup.c
new file mode 100644 (file)
index 0000000..f40a0e7
--- /dev/null
@@ -0,0 +1,101 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/serial_8250.h>
+#include <linux/pm.h>
+
+#include <asm/reboot.h>
+#include <asm/time.h>
+#include <asm/bootinfo.h>
+
+#include <linux/of_fdt.h>
+
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/common.h>
+
+#include <asm/netlogic/xlp-hal/iomap.h>
+#include <asm/netlogic/xlp-hal/xlp.h>
+#include <asm/netlogic/xlp-hal/sys.h>
+
+unsigned long nlm_common_ebase = 0x0;
+
+static void nlm_linux_exit(void)
+{
+       nlm_write_sys_reg(nlm_sys_base, SYS_CHIP_RESET, 1);
+       for ( ; ; )
+               cpu_wait();
+}
+
+void __init plat_mem_setup(void)
+{
+       panic_timeout   = 5;
+       _machine_restart = (void (*)(char *))nlm_linux_exit;
+       _machine_halt   = nlm_linux_exit;
+       pm_power_off    = nlm_linux_exit;
+}
+
+const char *get_system_type(void)
+{
+       return "Netlogic XLP Series";
+}
+
+void __init prom_free_prom_memory(void)
+{
+       /* Nothing yet */
+}
+
+void xlp_mmu_init(void)
+{
+       write_c0_config6(read_c0_config6() | 0x24);
+       current_cpu_data.tlbsize = ((read_c0_config6() >> 16) & 0xffff) + 1;
+       write_c0_config7(PM_DEFAULT_MASK >>
+               (13 + (ffz(PM_DEFAULT_MASK >> 13) / 2)));
+}
+
+void __init prom_init(void)
+{
+       void *fdtp;
+
+       fdtp = (void *)(long)fw_arg0;
+       xlp_mmu_init();
+       nlm_hal_init();
+       early_init_devtree(fdtp);
+
+       nlm_common_ebase = read_c0_ebase() & (~((1 << 12) - 1));
+#ifdef CONFIG_SMP
+       nlm_wakeup_secondary_cpus(0xffffffff);
+       register_smp_ops(&nlm_smp_ops);
+#endif
+}
diff --git a/arch/mips/netlogic/xlp/smpboot.S b/arch/mips/netlogic/xlp/smpboot.S
new file mode 100644 (file)
index 0000000..7dd3232
--- /dev/null
@@ -0,0 +1,217 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/init.h>
+
+#include <asm/asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/regdef.h>
+#include <asm/mipsregs.h>
+#include <asm/stackframe.h>
+#include <asm/asmmacro.h>
+#include <asm/addrspace.h>
+
+#include <asm/netlogic/xlp-hal/iomap.h>
+#include <asm/netlogic/xlp-hal/xlp.h>
+#include <asm/netlogic/xlp-hal/sys.h>
+#include <asm/netlogic/xlp-hal/cpucontrol.h>
+
+#define        CP0_EBASE       $15
+#define SYS_CPU_COHERENT_BASE(node)    CKSEG1ADDR(XLP_DEFAULT_IO_BASE) + \
+                       XLP_IO_SYS_OFFSET(node) + XLP_IO_PCI_HDRSZ + \
+                       SYS_CPU_NONCOHERENT_MODE * 4
+
+.macro __config_lsu
+       li      t0, LSU_DEFEATURE
+       mfcr    t1, t0
+
+       lui     t2, 0x4080  /* Enable Unaligned Access, L2HPE */
+       or      t1, t1, t2
+       li      t2, ~0xe    /* S1RCM */
+       and     t1, t1, t2
+       mtcr    t1, t0
+
+       li      t0, SCHED_DEFEATURE
+       lui     t1, 0x0100  /* Experimental: Disable BRU accepting ALU ops */
+       mtcr    t1, t0
+.endm
+
+       .set    noreorder
+       .set    arch=xlr        /* for mfcr/mtcr, XLR is sufficient */
+
+       __CPUINIT
+EXPORT(nlm_reset_entry)
+       mfc0    t0, CP0_EBASE, 1
+       mfc0    t1, CP0_EBASE, 1
+       srl     t1, 5
+       andi    t1, 0x3                 /* t1 <- node */
+       li      t2, 0x40000
+       mul     t3, t2, t1              /* t3 = node * 0x40000 */
+       srl     t0, t0, 2
+       and     t0, t0, 0x7             /* t0 <- core */
+       li      t1, 0x1
+       sll     t0, t1, t0
+       nor     t0, t0, zero            /* t0 <- ~(1 << core) */
+       li      t2, SYS_CPU_COHERENT_BASE(0)
+       add     t2, t2, t3              /* t2 <- SYS offset for node */
+       lw      t1, 0(t2)
+       and     t1, t1, t0
+       sw      t1, 0(t2)
+
+       /* read back to ensure complete */
+       lw      t1, 0(t2)
+       sync
+
+       /* Configure LSU on Non-0 Cores. */
+       __config_lsu
+
+/*
+ * Wake up sibling threads from the initial thread in
+ * a core.
+ */
+EXPORT(nlm_boot_siblings)
+       li      t0, CKSEG1ADDR(RESET_DATA_PHYS)
+       lw      t1, BOOT_THREAD_MODE(t0)        /* t1 <- thread mode */
+       li      t0, ((CPU_BLOCKID_MAP << 8) | MAP_THREADMODE)
+       mfcr    t2, t0
+       or      t2, t2, t1
+       mtcr    t2, t0
+
+       /*
+        * The new hardware thread starts at the next instruction
+        * For all the cases other than core 0 thread 0, we will
+         * jump to the secondary wait function.
+         */
+       mfc0    v0, CP0_EBASE, 1
+       andi    v0, 0x7f                /* v0 <- node/core */
+
+#if 1
+       /* A0 errata - Write MMU_SETUP after changing thread mode register. */
+       andi    v1, v0, 0x3             /* v1 <- thread id */
+       bnez    v1, 2f
+       nop
+
+        li     t0, MMU_SETUP
+        li     t1, 0
+        mtcr   t1, t0
+       ehb
+#endif
+
+2:     beqz    v0, 3f
+       nop
+
+       /* setup status reg */
+       mfc0    t1, CP0_STATUS
+       li      t0, ST0_BEV
+       or      t1, t0
+       xor     t1, t0
+#ifdef CONFIG_64BIT
+       ori     t1, ST0_KX
+#endif
+       mtc0    t1, CP0_STATUS
+
+       /* SETUP TLBs for a mapped kernel here */
+       PTR_LA  t0, prom_pre_boot_secondary_cpus
+       jalr    t0
+       nop
+
+       /*
+        * For the boot CPU, we have to restore registers and
+        * return
+        */
+3:     dmfc0   t0, $4, 2       /* restore SP from UserLocal */
+       li      t1, 0xfadebeef
+       dmtc0   t1, $4, 2       /* restore SP from UserLocal */
+       PTR_SUBU sp, t0, PT_SIZE
+       RESTORE_ALL
+       jr   ra
+       nop
+EXPORT(nlm_reset_entry_end)
+
+EXPORT(nlm_boot_core0_siblings)        /* "Master" (n0c0t0) cpu starts from here */
+       __config_lsu
+       dmtc0   sp, $4, 2               /* SP saved in UserLocal */
+       SAVE_ALL
+       sync
+       /* find the location to which nlm_boot_siblings was relocated */
+       li      t0, CKSEG1ADDR(RESET_VEC_PHYS)
+       dla     t1, nlm_reset_entry
+       dla     t2, nlm_boot_siblings
+       dsubu   t2, t1
+       daddu   t2, t0
+       /* call it */
+       jr      t2
+       nop
+       __FINIT
+
+       __CPUINIT
+NESTED(prom_pre_boot_secondary_cpus, 16, sp)
+       .set    mips64
+       mfc0    a0, CP0_EBASE, 1        /* read ebase */
+       andi    a0, 0x3ff               /* a0 has the processor_id() */
+       sll     t0, a0, 2               /* offset in cpu array */
+
+       PTR_LA  t1, nlm_cpu_ready       /* mark CPU ready */
+       PTR_ADDU t1, t0
+       li      t2, 1
+       sw      t2, 0(t1)
+
+       PTR_LA  t1, nlm_cpu_unblock
+       PTR_ADDU t1, t0
+1:     lw      t2, 0(t1)               /* wait till unblocked */
+       bnez    t2, 2f
+       nop
+       nop
+       nop
+       nop
+       nop
+       nop
+       j       1b
+       nop
+
+2:     PTR_LA  t1, nlm_next_sp
+       PTR_L   sp, 0(t1)
+       PTR_LA  t1, nlm_next_gp
+       PTR_L   gp, 0(t1)
+
+       /* a0 has the processor id */
+       PTR_LA  t0, nlm_early_init_secondary
+       jalr    t0
+       nop
+
+       PTR_LA  t0, smp_bootstrap
+       jr      t0
+       nop
+END(prom_pre_boot_secondary_cpus)
+       __FINIT
diff --git a/arch/mips/netlogic/xlp/wakeup.c b/arch/mips/netlogic/xlp/wakeup.c
new file mode 100644 (file)
index 0000000..e081a77
--- /dev/null
@@ -0,0 +1,149 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/threads.h>
+
+#include <asm/asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/mipsregs.h>
+#include <asm/addrspace.h>
+#include <asm/string.h>
+
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/common.h>
+#include <asm/netlogic/mips-extns.h>
+
+#include <asm/netlogic/xlp-hal/iomap.h>
+#include <asm/netlogic/xlp-hal/pic.h>
+#include <asm/netlogic/xlp-hal/xlp.h>
+#include <asm/netlogic/xlp-hal/sys.h>
+
+unsigned long secondary_entry;
+uint32_t nlm_coremask;
+unsigned int nlm_threads_per_core;
+unsigned int nlm_threadmode;
+
+static void nlm_enable_secondary_cores(unsigned int cores_bitmap)
+{
+       uint32_t core, value, coremask;
+
+       for (core = 1; core < 8; core++) {
+               coremask = 1 << core;
+               if ((cores_bitmap & coremask) == 0)
+                       continue;
+
+               /* Enable CPU clock */
+               value = nlm_read_sys_reg(nlm_sys_base, SYS_CORE_DFS_DIS_CTRL);
+               value &= ~coremask;
+               nlm_write_sys_reg(nlm_sys_base, SYS_CORE_DFS_DIS_CTRL, value);
+
+               /* Remove CPU Reset */
+               value = nlm_read_sys_reg(nlm_sys_base, SYS_CPU_RESET);
+               value &= ~coremask;
+               nlm_write_sys_reg(nlm_sys_base, SYS_CPU_RESET, value);
+
+               /* Poll for CPU to mark itself coherent */
+               do {
+                       value = nlm_read_sys_reg(nlm_sys_base,
+                           SYS_CPU_NONCOHERENT_MODE);
+               } while ((value & coremask) != 0);
+       }
+}
+
+
+static void nlm_parse_cpumask(u32 cpu_mask)
+{
+       uint32_t core0_thr_mask, core_thr_mask;
+       int i;
+
+       core0_thr_mask = cpu_mask & 0xf;
+       switch (core0_thr_mask) {
+       case 1:
+               nlm_threads_per_core = 1;
+               nlm_threadmode = 0;
+               break;
+       case 3:
+               nlm_threads_per_core = 2;
+               nlm_threadmode = 2;
+               break;
+       case 0xf:
+               nlm_threads_per_core = 4;
+               nlm_threadmode = 3;
+               break;
+       default:
+               goto unsupp;
+       }
+
+       /* Verify other cores CPU masks */
+       nlm_coremask = 1;
+       for (i = 1; i < 8; i++) {
+               core_thr_mask = (cpu_mask >> (i * 4)) & 0xf;
+               if (core_thr_mask) {
+                       if (core_thr_mask != core0_thr_mask)
+                               goto unsupp;
+                       nlm_coremask |= 1 << i;
+               }
+       }
+       return;
+
+unsupp:
+       panic("Unsupported CPU mask %x\n", cpu_mask);
+}
+
+int __cpuinit nlm_wakeup_secondary_cpus(u32 wakeup_mask)
+{
+       unsigned long reset_vec;
+       unsigned int *reset_data;
+
+       /* Update reset entry point with CPU init code */
+       reset_vec = CKSEG1ADDR(RESET_VEC_PHYS);
+       memcpy((void *)reset_vec, (void *)nlm_reset_entry,
+                       (nlm_reset_entry_end - nlm_reset_entry));
+
+       /* verify the mask and setup core config variables */
+       nlm_parse_cpumask(wakeup_mask);
+
+       /* Setup CPU init parameters */
+       reset_data = (unsigned int *)CKSEG1ADDR(RESET_DATA_PHYS);
+       reset_data[BOOT_THREAD_MODE] = nlm_threadmode;
+
+       /* first wakeup core 0 siblings */
+       nlm_boot_core0_siblings();
+
+       /* enable the reset of the cores */
+       nlm_enable_secondary_cores(nlm_coremask);
+       return 0;
+}