]> git.karo-electronics.de Git - linux-beck.git/commitdiff
x86, platforms: Remove NUMAQ
authorH. Peter Anvin <hpa@linux.intel.com>
Tue, 25 Feb 2014 20:14:06 +0000 (12:14 -0800)
committerH. Peter Anvin <hpa@linux.intel.com>
Thu, 27 Feb 2014 16:07:39 +0000 (08:07 -0800)
The NUMAQ support seems to be unmaintained, remove it.

Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: David Rientjes <rientjes@google.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/n/530CFD6C.7040705@zytor.com
arch/x86/Kconfig
arch/x86/Kconfig.cpu
arch/x86/include/asm/mmzone_32.h
arch/x86/include/asm/mpspec.h
arch/x86/include/asm/numaq.h [deleted file]
arch/x86/kernel/apic/Makefile
arch/x86/kernel/apic/numaq_32.c [deleted file]
arch/x86/kernel/cpu/intel.c
arch/x86/mm/numa.c
arch/x86/pci/Makefile
arch/x86/pci/numaq_32.c [deleted file]

index 3c7f6dbf84987c294fbf4c6ad277178ecf7a54bc..e1d0c9ac2b56e47da19af5baf24542bc57fe08f2 100644 (file)
@@ -346,7 +346,6 @@ config X86_EXTENDED_PLATFORM
          for the following (non-PC) 32 bit x86 platforms:
                Goldfish (Android emulator)
                AMD Elan
-               NUMAQ (IBM/Sequent)
                RDC R-321x SoC
                SGI 320/540 (Visual Workstation)
                STA2X11-based (e.g. Northville)
@@ -487,32 +486,18 @@ config X86_32_NON_STANDARD
        depends on X86_32 && SMP
        depends on X86_EXTENDED_PLATFORM
        ---help---
-         This option compiles in the NUMAQ, bigsmp, and STA2X11 default
-         subarchitectures.  It is intended for a generic binary kernel. If you
-         select them all, kernel will probe it one by one and will fallback to
-         default.
+         This option compiles in the bigsmp and STA2X11 default
+         subarchitectures.  It is intended for a generic binary
+         kernel. If you select them all, kernel will probe it one by
+         one and will fallback to default.
 
 # Alphabetically sorted list of Non standard 32 bit platforms
 
-config X86_NUMAQ
-       bool "NUMAQ (IBM/Sequent)"
-       depends on X86_32_NON_STANDARD
-       depends on PCI
-       select NUMA
-       select X86_MPPARSE
-       ---help---
-         This option is used for getting Linux to run on a NUMAQ (IBM/Sequent)
-         NUMA multiquad box. This changes the way that processors are
-         bootstrapped, and uses Clustered Logical APIC addressing mode instead
-         of Flat Logical.  You will need a new lynxer.elf file to flash your
-         firmware with - send email to <Martin.Bligh@us.ibm.com>.
-
 config X86_SUPPORTS_MEMORY_FAILURE
        def_bool y
        # MCE code calls memory_failure():
        depends on X86_MCE
        # On 32-bit this adds too big of NODES_SHIFT and we run out of page flags:
-       depends on !X86_NUMAQ
        # On 32-bit SPARSEMEM adds too big of SECTIONS_WIDTH:
        depends on X86_64 || !SPARSEMEM
        select ARCH_SUPPORTS_MEMORY_FAILURE
@@ -783,7 +768,7 @@ config NR_CPUS
        range 2 8192 if SMP && !MAXSMP && CPUMASK_OFFSTACK && X86_64
        default "1" if !SMP
        default "8192" if MAXSMP
-       default "32" if SMP && (X86_NUMAQ || X86_BIGSMP)
+       default "32" if SMP && X86_BIGSMP
        default "8" if SMP
        ---help---
          This allows you to specify the maximum number of CPUs which this
@@ -1064,13 +1049,11 @@ config X86_CPUID
 
 choice
        prompt "High Memory Support"
-       default HIGHMEM64G if X86_NUMAQ
        default HIGHMEM4G
        depends on X86_32
 
 config NOHIGHMEM
        bool "off"
-       depends on !X86_NUMAQ
        ---help---
          Linux can use up to 64 Gigabytes of physical memory on x86 systems.
          However, the address space of 32-bit x86 processors is only 4
@@ -1107,7 +1090,6 @@ config NOHIGHMEM
 
 config HIGHMEM4G
        bool "4GB"
-       depends on !X86_NUMAQ
        ---help---
          Select this if you have a 32-bit processor and between 1 and 4
          gigabytes of physical RAM.
@@ -1199,8 +1181,8 @@ config DIRECT_GBPAGES
 config NUMA
        bool "Numa Memory Allocation and Scheduler Support"
        depends on SMP
-       depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP))
-       default y if (X86_NUMAQ || X86_BIGSMP)
+       depends on X86_64 || (X86_32 && HIGHMEM64G && X86_BIGSMP)
+       default y if X86_BIGSMP
        ---help---
          Enable NUMA (Non Uniform Memory Access) support.
 
@@ -1211,8 +1193,7 @@ config NUMA
          For 64-bit this is recommended if the system is Intel Core i7
          (or later), AMD Opteron, or EM64T NUMA.
 
-         For 32-bit this is only needed on (rare) 32-bit-only platforms
-         that support NUMA topologies, such as NUMAQ, or if you boot a 32-bit
+         For 32-bit this is only needed if you boot a 32-bit
          kernel on a 64-bit NUMA platform.
 
          Otherwise, you should say N.
@@ -1258,7 +1239,6 @@ config NODES_SHIFT
        range 1 10
        default "10" if MAXSMP
        default "6" if X86_64
-       default "4" if X86_NUMAQ
        default "3"
        depends on NEED_MULTIPLE_NODES
        ---help---
index c026cca5602c6fe5c84619f0b43b2fe7c3bb2382..3c6b17b08a187db129a102d4638028b5fa2abc24 100644 (file)
@@ -363,7 +363,7 @@ config X86_P6_NOP
 
 config X86_TSC
        def_bool y
-       depends on ((MWINCHIP3D || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2 || MATOM) && !X86_NUMAQ) || X86_64
+       depends on (MWINCHIP3D || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2 || MATOM) || X86_64
 
 config X86_CMPXCHG64
        def_bool y
index 8a9b3e288cb4b361e0278d451921778881afd6f6..1ec990bd7dc0cf54bf9b5499d59175eb7f2dd620 100644 (file)
@@ -11,9 +11,6 @@
 #ifdef CONFIG_NUMA
 extern struct pglist_data *node_data[];
 #define NODE_DATA(nid) (node_data[nid])
-
-#include <asm/numaq.h>
-
 #endif /* CONFIG_NUMA */
 
 #ifdef CONFIG_DISCONTIGMEM
index 3e6b4920ef5de2c39cc1e3fb582fe7f0f0a586a7..f5a6179567359359996d6bd878f3d85dc235b023 100644 (file)
@@ -25,12 +25,6 @@ extern int pic_mode;
 
 extern unsigned int def_to_bigsmp;
 
-#ifdef CONFIG_X86_NUMAQ
-extern int mp_bus_id_to_node[MAX_MP_BUSSES];
-extern int mp_bus_id_to_local[MAX_MP_BUSSES];
-extern int quad_local_to_mp_bus_id [NR_CPUS/4][4];
-#endif
-
 #else /* CONFIG_X86_64: */
 
 #define MAX_MP_BUSSES          256
diff --git a/arch/x86/include/asm/numaq.h b/arch/x86/include/asm/numaq.h
deleted file mode 100644 (file)
index c3b3c32..0000000
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Written by: Patricia Gaughen, IBM Corporation
- *
- * Copyright (C) 2002, IBM Corp.
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <gone@us.ibm.com>
- */
-
-#ifndef _ASM_X86_NUMAQ_H
-#define _ASM_X86_NUMAQ_H
-
-#ifdef CONFIG_X86_NUMAQ
-
-extern int found_numaq;
-extern int numaq_numa_init(void);
-extern int pci_numaq_init(void);
-
-extern void *xquad_portio;
-
-#define XQUAD_PORTIO_BASE 0xfe400000
-#define XQUAD_PORTIO_QUAD 0x40000  /* 256k per quad. */
-#define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port)
-
-/*
- * SYS_CFG_DATA_PRIV_ADDR, struct eachquadmem, and struct sys_cfg_data are the
- */
-#define SYS_CFG_DATA_PRIV_ADDR         0x0009d000 /* place for scd in private
-                                                     quad space */
-
-/*
- * Communication area for each processor on lynxer-processor tests.
- *
- * NOTE: If you change the size of this eachproc structure you need
- *       to change the definition for EACH_QUAD_SIZE.
- */
-struct eachquadmem {
-       unsigned int    priv_mem_start;         /* Starting address of this */
-                                               /* quad's private memory. */
-                                               /* This is always 0. */
-                                               /* In MB. */
-       unsigned int    priv_mem_size;          /* Size of this quad's */
-                                               /* private memory. */
-                                               /* In MB. */
-       unsigned int    low_shrd_mem_strp_start;/* Starting address of this */
-                                               /* quad's low shared block */
-                                               /* (untranslated). */
-                                               /* In MB. */
-       unsigned int    low_shrd_mem_start;     /* Starting address of this */
-                                               /* quad's low shared memory */
-                                               /* (untranslated). */
-                                               /* In MB. */
-       unsigned int    low_shrd_mem_size;      /* Size of this quad's low */
-                                               /* shared memory. */
-                                               /* In MB. */
-       unsigned int    lmmio_copb_start;       /* Starting address of this */
-                                               /* quad's local memory */
-                                               /* mapped I/O in the */
-                                               /* compatibility OPB. */
-                                               /* In MB. */
-       unsigned int    lmmio_copb_size;        /* Size of this quad's local */
-                                               /* memory mapped I/O in the */
-                                               /* compatibility OPB. */
-                                               /* In MB. */
-       unsigned int    lmmio_nopb_start;       /* Starting address of this */
-                                               /* quad's local memory */
-                                               /* mapped I/O in the */
-                                               /* non-compatibility OPB. */
-                                               /* In MB. */
-       unsigned int    lmmio_nopb_size;        /* Size of this quad's local */
-                                               /* memory mapped I/O in the */
-                                               /* non-compatibility OPB. */
-                                               /* In MB. */
-       unsigned int    io_apic_0_start;        /* Starting address of I/O */
-                                               /* APIC 0. */
-       unsigned int    io_apic_0_sz;           /* Size I/O APIC 0. */
-       unsigned int    io_apic_1_start;        /* Starting address of I/O */
-                                               /* APIC 1. */
-       unsigned int    io_apic_1_sz;           /* Size I/O APIC 1. */
-       unsigned int    hi_shrd_mem_start;      /* Starting address of this */
-                                               /* quad's high shared memory.*/
-                                               /* In MB. */
-       unsigned int    hi_shrd_mem_size;       /* Size of this quad's high */
-                                               /* shared memory. */
-                                               /* In MB. */
-       unsigned int    mps_table_addr;         /* Address of this quad's */
-                                               /* MPS tables from BIOS, */
-                                               /* in system space.*/
-       unsigned int    lcl_MDC_pio_addr;       /* Port-I/O address for */
-                                               /* local access of MDC. */
-       unsigned int    rmt_MDC_mmpio_addr;     /* MM-Port-I/O address for */
-                                               /* remote access of MDC. */
-       unsigned int    mm_port_io_start;       /* Starting address of this */
-                                               /* quad's memory mapped Port */
-                                               /* I/O space. */
-       unsigned int    mm_port_io_size;        /* Size of this quad's memory*/
-                                               /* mapped Port I/O space. */
-       unsigned int    mm_rmt_io_apic_start;   /* Starting address of this */
-                                               /* quad's memory mapped */
-                                               /* remote I/O APIC space. */
-       unsigned int    mm_rmt_io_apic_size;    /* Size of this quad's memory*/
-                                               /* mapped remote I/O APIC */
-                                               /* space. */
-       unsigned int    mm_isa_start;           /* Starting address of this */
-                                               /* quad's memory mapped ISA */
-                                               /* space (contains MDC */
-                                               /* memory space). */
-       unsigned int    mm_isa_size;            /* Size of this quad's memory*/
-                                               /* mapped ISA space (contains*/
-                                               /* MDC memory space). */
-       unsigned int    rmt_qmi_addr;           /* Remote addr to access QMI.*/
-       unsigned int    lcl_qmi_addr;           /* Local addr to access QMI. */
-};
-
-/*
- * Note: This structure must be NOT be changed unless the multiproc and
- * OS are changed to reflect the new structure.
- */
-struct sys_cfg_data {
-       unsigned int    quad_id;
-       unsigned int    bsp_proc_id; /* Boot Strap Processor in this quad. */
-       unsigned int    scd_version; /* Version number of this table. */
-       unsigned int    first_quad_id;
-       unsigned int    quads_present31_0; /* 1 bit for each quad */
-       unsigned int    quads_present63_32; /* 1 bit for each quad */
-       unsigned int    config_flags;
-       unsigned int    boot_flags;
-       unsigned int    csr_start_addr; /* Absolute value (not in MB) */
-       unsigned int    csr_size; /* Absolute value (not in MB) */
-       unsigned int    lcl_apic_start_addr; /* Absolute value (not in MB) */
-       unsigned int    lcl_apic_size; /* Absolute value (not in MB) */
-       unsigned int    low_shrd_mem_base; /* 0 or 512MB or 1GB */
-       unsigned int    low_shrd_mem_quad_offset; /* 0,128M,256M,512M,1G */
-                                       /* may not be totally populated */
-       unsigned int    split_mem_enbl; /* 0 for no low shared memory */
-       unsigned int    mmio_sz; /* Size of total system memory mapped I/O */
-                                /* (in MB). */
-       unsigned int    quad_spin_lock; /* Spare location used for quad */
-                                       /* bringup. */
-       unsigned int    nonzero55; /* For checksumming. */
-       unsigned int    nonzeroaa; /* For checksumming. */
-       unsigned int    scd_magic_number;
-       unsigned int    system_type;
-       unsigned int    checksum;
-       /*
-        *      memory configuration area for each quad
-        */
-       struct          eachquadmem eq[MAX_NUMNODES];   /* indexed by quad id */
-};
-
-void numaq_tsc_disable(void);
-
-#endif /* CONFIG_X86_NUMAQ */
-#endif /* _ASM_X86_NUMAQ_H */
-
index 70e141520ad708927f0866493395af066946385b..dcb5b15401ce805f15bb84c111b842696606ea56 100644 (file)
@@ -18,7 +18,6 @@ obj-y                         += apic_flat_64.o
 endif
 
 # APIC probe will depend on the listing order here
-obj-$(CONFIG_X86_NUMAQ)                += numaq_32.o
 obj-$(CONFIG_X86_BIGSMP)       += bigsmp_32.o
 
 # For 32bit, probe_32 need to be listed last
diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c
deleted file mode 100644 (file)
index 030ea1c..0000000
+++ /dev/null
@@ -1,524 +0,0 @@
-/*
- * Written by: Patricia Gaughen, IBM Corporation
- *
- * Copyright (C) 2002, IBM Corp.
- * Copyright (C) 2009, Red Hat, Inc., Ingo Molnar
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <gone@us.ibm.com>
- */
-#include <linux/nodemask.h>
-#include <linux/topology.h>
-#include <linux/bootmem.h>
-#include <linux/memblock.h>
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <linux/kernel.h>
-#include <linux/mmzone.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/numa.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-#include <linux/mm.h>
-
-#include <asm/processor.h>
-#include <asm/fixmap.h>
-#include <asm/mpspec.h>
-#include <asm/numaq.h>
-#include <asm/setup.h>
-#include <asm/apic.h>
-#include <asm/e820.h>
-#include <asm/ipi.h>
-
-int found_numaq;
-
-/*
- * Have to match translation table entries to main table entries by counter
- * hence the mpc_record variable .... can't see a less disgusting way of
- * doing this ....
- */
-struct mpc_trans {
-       unsigned char                   mpc_type;
-       unsigned char                   trans_len;
-       unsigned char                   trans_type;
-       unsigned char                   trans_quad;
-       unsigned char                   trans_global;
-       unsigned char                   trans_local;
-       unsigned short                  trans_reserved;
-};
-
-static int                             mpc_record;
-
-static struct mpc_trans                        *translation_table[MAX_MPC_ENTRY];
-
-int                                    mp_bus_id_to_node[MAX_MP_BUSSES];
-int                                    mp_bus_id_to_local[MAX_MP_BUSSES];
-int                                    quad_local_to_mp_bus_id[NR_CPUS/4][4];
-
-
-static inline void numaq_register_node(int node, struct sys_cfg_data *scd)
-{
-       struct eachquadmem *eq = scd->eq + node;
-       u64 start = (u64)(eq->hi_shrd_mem_start - eq->priv_mem_size) << 20;
-       u64 end = (u64)(eq->hi_shrd_mem_start + eq->hi_shrd_mem_size) << 20;
-       int ret;
-
-       node_set(node, numa_nodes_parsed);
-       ret = numa_add_memblk(node, start, end);
-       BUG_ON(ret < 0);
-}
-
-/*
- * Function: smp_dump_qct()
- *
- * Description: gets memory layout from the quad config table.  This
- * function also updates numa_nodes_parsed with the nodes (quads) present.
- */
-static void __init smp_dump_qct(void)
-{
-       struct sys_cfg_data *scd;
-       int node;
-
-       scd = (void *)__va(SYS_CFG_DATA_PRIV_ADDR);
-
-       for_each_node(node) {
-               if (scd->quads_present31_0 & (1 << node))
-                       numaq_register_node(node, scd);
-       }
-}
-
-void numaq_tsc_disable(void)
-{
-       if (!found_numaq)
-               return;
-
-       if (num_online_nodes() > 1) {
-               printk(KERN_DEBUG "NUMAQ: disabling TSC\n");
-               setup_clear_cpu_cap(X86_FEATURE_TSC);
-       }
-}
-
-static void __init numaq_tsc_init(void)
-{
-       numaq_tsc_disable();
-}
-
-static inline int generate_logical_apicid(int quad, int phys_apicid)
-{
-       return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1);
-}
-
-/* x86_quirks member */
-static int mpc_apic_id(struct mpc_cpu *m)
-{
-       int quad = translation_table[mpc_record]->trans_quad;
-       int logical_apicid = generate_logical_apicid(quad, m->apicid);
-
-       printk(KERN_DEBUG
-               "Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n",
-                m->apicid, (m->cpufeature & CPU_FAMILY_MASK) >> 8,
-               (m->cpufeature & CPU_MODEL_MASK) >> 4,
-                m->apicver, quad, logical_apicid);
-
-       return logical_apicid;
-}
-
-/* x86_quirks member */
-static void mpc_oem_bus_info(struct mpc_bus *m, char *name)
-{
-       int quad = translation_table[mpc_record]->trans_quad;
-       int local = translation_table[mpc_record]->trans_local;
-
-       mp_bus_id_to_node[m->busid] = quad;
-       mp_bus_id_to_local[m->busid] = local;
-
-       printk(KERN_INFO "Bus #%d is %s (node %d)\n", m->busid, name, quad);
-}
-
-/* x86_quirks member */
-static void mpc_oem_pci_bus(struct mpc_bus *m)
-{
-       int quad = translation_table[mpc_record]->trans_quad;
-       int local = translation_table[mpc_record]->trans_local;
-
-       quad_local_to_mp_bus_id[quad][local] = m->busid;
-}
-
-/*
- * Called from mpparse code.
- * mode = 0: prescan
- * mode = 1: one mpc entry scanned
- */
-static void numaq_mpc_record(unsigned int mode)
-{
-       if (!mode)
-               mpc_record = 0;
-       else
-               mpc_record++;
-}
-
-static void __init MP_translation_info(struct mpc_trans *m)
-{
-       printk(KERN_INFO
-           "Translation: record %d, type %d, quad %d, global %d, local %d\n",
-              mpc_record, m->trans_type, m->trans_quad, m->trans_global,
-              m->trans_local);
-
-       if (mpc_record >= MAX_MPC_ENTRY)
-               printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n");
-       else
-               translation_table[mpc_record] = m; /* stash this for later */
-
-       if (m->trans_quad < MAX_NUMNODES && !node_online(m->trans_quad))
-               node_set_online(m->trans_quad);
-}
-
-static int __init mpf_checksum(unsigned char *mp, int len)
-{
-       int sum = 0;
-
-       while (len--)
-               sum += *mp++;
-
-       return sum & 0xFF;
-}
-
-/*
- * Read/parse the MPC oem tables
- */
-static void __init smp_read_mpc_oem(struct mpc_table *mpc)
-{
-       struct mpc_oemtable *oemtable = (void *)(long)mpc->oemptr;
-       int count = sizeof(*oemtable);  /* the header size */
-       unsigned char *oemptr = ((unsigned char *)oemtable) + count;
-
-       mpc_record = 0;
-       printk(KERN_INFO
-               "Found an OEM MPC table at %8p - parsing it...\n", oemtable);
-
-       if (memcmp(oemtable->signature, MPC_OEM_SIGNATURE, 4)) {
-               printk(KERN_WARNING
-                      "SMP mpc oemtable: bad signature [%c%c%c%c]!\n",
-                      oemtable->signature[0], oemtable->signature[1],
-                      oemtable->signature[2], oemtable->signature[3]);
-               return;
-       }
-
-       if (mpf_checksum((unsigned char *)oemtable, oemtable->length)) {
-               printk(KERN_WARNING "SMP oem mptable: checksum error!\n");
-               return;
-       }
-
-       while (count < oemtable->length) {
-               switch (*oemptr) {
-               case MP_TRANSLATION:
-                       {
-                               struct mpc_trans *m = (void *)oemptr;
-
-                               MP_translation_info(m);
-                               oemptr += sizeof(*m);
-                               count += sizeof(*m);
-                               ++mpc_record;
-                               break;
-                       }
-               default:
-                       printk(KERN_WARNING
-                              "Unrecognised OEM table entry type! - %d\n",
-                              (int)*oemptr);
-                       return;
-               }
-       }
-}
-
-static __init void early_check_numaq(void)
-{
-       /*
-        * get boot-time SMP configuration:
-        */
-       if (smp_found_config)
-               early_get_smp_config();
-
-       if (found_numaq) {
-               x86_init.mpparse.mpc_record = numaq_mpc_record;
-               x86_init.mpparse.setup_ioapic_ids = x86_init_noop;
-               x86_init.mpparse.mpc_apic_id = mpc_apic_id;
-               x86_init.mpparse.smp_read_mpc_oem = smp_read_mpc_oem;
-               x86_init.mpparse.mpc_oem_pci_bus = mpc_oem_pci_bus;
-               x86_init.mpparse.mpc_oem_bus_info = mpc_oem_bus_info;
-               x86_init.timers.tsc_pre_init = numaq_tsc_init;
-               x86_init.pci.init = pci_numaq_init;
-       }
-}
-
-int __init numaq_numa_init(void)
-{
-       early_check_numaq();
-       if (!found_numaq)
-               return -ENOENT;
-       smp_dump_qct();
-
-       return 0;
-}
-
-#define NUMAQ_APIC_DFR_VALUE   (APIC_DFR_CLUSTER)
-
-static inline unsigned int numaq_get_apic_id(unsigned long x)
-{
-       return (x >> 24) & 0x0F;
-}
-
-static inline void numaq_send_IPI_mask(const struct cpumask *mask, int vector)
-{
-       default_send_IPI_mask_sequence_logical(mask, vector);
-}
-
-static inline void numaq_send_IPI_allbutself(int vector)
-{
-       default_send_IPI_mask_allbutself_logical(cpu_online_mask, vector);
-}
-
-static inline void numaq_send_IPI_all(int vector)
-{
-       numaq_send_IPI_mask(cpu_online_mask, vector);
-}
-
-#define NUMAQ_TRAMPOLINE_PHYS_LOW      (0x8)
-#define NUMAQ_TRAMPOLINE_PHYS_HIGH     (0xa)
-
-/*
- * Because we use NMIs rather than the INIT-STARTUP sequence to
- * bootstrap the CPUs, the APIC may be in a weird state. Kick it:
- */
-static inline void numaq_smp_callin_clear_local_apic(void)
-{
-       clear_local_APIC();
-}
-
-static inline const struct cpumask *numaq_target_cpus(void)
-{
-       return cpu_all_mask;
-}
-
-static unsigned long numaq_check_apicid_used(physid_mask_t *map, int apicid)
-{
-       return physid_isset(apicid, *map);
-}
-
-static inline unsigned long numaq_check_apicid_present(int bit)
-{
-       return physid_isset(bit, phys_cpu_present_map);
-}
-
-static inline int numaq_apic_id_registered(void)
-{
-       return 1;
-}
-
-static inline void numaq_init_apic_ldr(void)
-{
-       /* Already done in NUMA-Q firmware */
-}
-
-static inline void numaq_setup_apic_routing(void)
-{
-       printk(KERN_INFO
-               "Enabling APIC mode:  NUMA-Q.  Using %d I/O APICs\n",
-               nr_ioapics);
-}
-
-/*
- * Skip adding the timer int on secondary nodes, which causes
- * a small but painful rift in the time-space continuum.
- */
-static inline int numaq_multi_timer_check(int apic, int irq)
-{
-       return apic != 0 && irq == 0;
-}
-
-static inline void numaq_ioapic_phys_id_map(physid_mask_t *phys_map, physid_mask_t *retmap)
-{
-       /* We don't have a good way to do this yet - hack */
-       return physids_promote(0xFUL, retmap);
-}
-
-/*
- * Supporting over 60 cpus on NUMA-Q requires a locality-dependent
- * cpu to APIC ID relation to properly interact with the intelligent
- * mode of the cluster controller.
- */
-static inline int numaq_cpu_present_to_apicid(int mps_cpu)
-{
-       if (mps_cpu < 60)
-               return ((mps_cpu >> 2) << 4) | (1 << (mps_cpu & 0x3));
-       else
-               return BAD_APICID;
-}
-
-static inline int numaq_apicid_to_node(int logical_apicid)
-{
-       return logical_apicid >> 4;
-}
-
-static int numaq_numa_cpu_node(int cpu)
-{
-       int logical_apicid = early_per_cpu(x86_cpu_to_logical_apicid, cpu);
-
-       if (logical_apicid != BAD_APICID)
-               return numaq_apicid_to_node(logical_apicid);
-       return NUMA_NO_NODE;
-}
-
-static void numaq_apicid_to_cpu_present(int logical_apicid, physid_mask_t *retmap)
-{
-       int node = numaq_apicid_to_node(logical_apicid);
-       int cpu = __ffs(logical_apicid & 0xf);
-
-       physid_set_mask_of_physid(cpu + 4*node, retmap);
-}
-
-/* Where the IO area was mapped on multiquad, always 0 otherwise */
-void *xquad_portio;
-
-static inline int numaq_check_phys_apicid_present(int phys_apicid)
-{
-       return 1;
-}
-
-/*
- * We use physical apicids here, not logical, so just return the default
- * physical broadcast to stop people from breaking us
- */
-static int
-numaq_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
-                            const struct cpumask *andmask,
-                            unsigned int *apicid)
-{
-       *apicid = 0x0F;
-       return 0;
-}
-
-/* No NUMA-Q box has a HT CPU, but it can't hurt to use the default code. */
-static inline int numaq_phys_pkg_id(int cpuid_apic, int index_msb)
-{
-       return cpuid_apic >> index_msb;
-}
-
-static int
-numaq_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
-{
-       if (strncmp(oem, "IBM NUMA", 8))
-               printk(KERN_ERR "Warning! Not a NUMA-Q system!\n");
-       else
-               found_numaq = 1;
-
-       return found_numaq;
-}
-
-static int probe_numaq(void)
-{
-       /* already know from get_memcfg_numaq() */
-       return found_numaq;
-}
-
-static void numaq_setup_portio_remap(void)
-{
-       int num_quads = num_online_nodes();
-
-       if (num_quads <= 1)
-               return;
-
-       printk(KERN_INFO
-               "Remapping cross-quad port I/O for %d quads\n", num_quads);
-
-       xquad_portio = ioremap(XQUAD_PORTIO_BASE, num_quads*XQUAD_PORTIO_QUAD);
-
-       printk(KERN_INFO
-               "xquad_portio vaddr 0x%08lx, len %08lx\n",
-               (u_long) xquad_portio, (u_long) num_quads*XQUAD_PORTIO_QUAD);
-}
-
-/* Use __refdata to keep false positive warning calm.  */
-static struct apic __refdata apic_numaq = {
-
-       .name                           = "NUMAQ",
-       .probe                          = probe_numaq,
-       .acpi_madt_oem_check            = NULL,
-       .apic_id_valid                  = default_apic_id_valid,
-       .apic_id_registered             = numaq_apic_id_registered,
-
-       .irq_delivery_mode              = dest_LowestPrio,
-       /* physical delivery on LOCAL quad: */
-       .irq_dest_mode                  = 0,
-
-       .target_cpus                    = numaq_target_cpus,
-       .disable_esr                    = 1,
-       .dest_logical                   = APIC_DEST_LOGICAL,
-       .check_apicid_used              = numaq_check_apicid_used,
-       .check_apicid_present           = numaq_check_apicid_present,
-
-       .vector_allocation_domain       = flat_vector_allocation_domain,
-       .init_apic_ldr                  = numaq_init_apic_ldr,
-
-       .ioapic_phys_id_map             = numaq_ioapic_phys_id_map,
-       .setup_apic_routing             = numaq_setup_apic_routing,
-       .multi_timer_check              = numaq_multi_timer_check,
-       .cpu_present_to_apicid          = numaq_cpu_present_to_apicid,
-       .apicid_to_cpu_present          = numaq_apicid_to_cpu_present,
-       .setup_portio_remap             = numaq_setup_portio_remap,
-       .check_phys_apicid_present      = numaq_check_phys_apicid_present,
-       .enable_apic_mode               = NULL,
-       .phys_pkg_id                    = numaq_phys_pkg_id,
-       .mps_oem_check                  = numaq_mps_oem_check,
-
-       .get_apic_id                    = numaq_get_apic_id,
-       .set_apic_id                    = NULL,
-       .apic_id_mask                   = 0x0F << 24,
-
-       .cpu_mask_to_apicid_and         = numaq_cpu_mask_to_apicid_and,
-
-       .send_IPI_mask                  = numaq_send_IPI_mask,
-       .send_IPI_mask_allbutself       = NULL,
-       .send_IPI_allbutself            = numaq_send_IPI_allbutself,
-       .send_IPI_all                   = numaq_send_IPI_all,
-       .send_IPI_self                  = default_send_IPI_self,
-
-       .wakeup_secondary_cpu           = wakeup_secondary_cpu_via_nmi,
-       .trampoline_phys_low            = NUMAQ_TRAMPOLINE_PHYS_LOW,
-       .trampoline_phys_high           = NUMAQ_TRAMPOLINE_PHYS_HIGH,
-
-       /* We don't do anything here because we use NMI's to boot instead */
-       .wait_for_init_deassert         = false,
-       .smp_callin_clear_local_apic    = numaq_smp_callin_clear_local_apic,
-       .inquire_remote_apic            = NULL,
-
-       .read                           = native_apic_mem_read,
-       .write                          = native_apic_mem_write,
-       .eoi_write                      = native_apic_mem_write,
-       .icr_read                       = native_apic_icr_read,
-       .icr_write                      = native_apic_icr_write,
-       .wait_icr_idle                  = native_apic_wait_icr_idle,
-       .safe_wait_icr_idle             = native_safe_apic_wait_icr_idle,
-
-       .x86_32_early_logical_apicid    = noop_x86_32_early_logical_apicid,
-       .x86_32_numa_cpu_node           = numaq_numa_cpu_node,
-};
-
-apic_driver(apic_numaq);
index 5cd9bfabd6450e6743dc03479dad8cba38f9eec9..ea56e7c9abe623b797f6d7cfbca81cf75de6aebf 100644 (file)
@@ -267,10 +267,6 @@ static void intel_workarounds(struct cpuinfo_x86 *c)
        }
 #endif
 
-#ifdef CONFIG_X86_NUMAQ
-       numaq_tsc_disable();
-#endif
-
        intel_smp_check(c);
 }
 #else
index 27aa0455fab31b930e12c6792ade37234814f4a4..1d045f9c390fd356474541830fd82eb0441006b6 100644 (file)
@@ -687,10 +687,6 @@ static int __init dummy_numa_init(void)
 void __init x86_numa_init(void)
 {
        if (!numa_off) {
-#ifdef CONFIG_X86_NUMAQ
-               if (!numa_init(numaq_numa_init))
-                       return;
-#endif
 #ifdef CONFIG_ACPI_NUMA
                if (!numa_init(x86_acpi_numa_init))
                        return;
index 758b8272c821cd41ea57cb8cd669ce453738a7d2..5c6fc3577a49f80a75c86cd3815a6c5758ba1288 100644 (file)
@@ -13,7 +13,6 @@ obj-y                         += legacy.o irq.o
 
 obj-$(CONFIG_STA2X11)           += sta2x11-fixup.o
 
-obj-$(CONFIG_X86_NUMAQ)                += numaq_32.o
 obj-$(CONFIG_X86_NUMACHIP)     += numachip.o
 
 obj-$(CONFIG_X86_INTEL_MID)    += intel_mid_pci.o
diff --git a/arch/x86/pci/numaq_32.c b/arch/x86/pci/numaq_32.c
deleted file mode 100644 (file)
index 72c229f..0000000
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * numaq_32.c - Low-level PCI access for NUMA-Q machines
- */
-
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/nodemask.h>
-#include <asm/apic.h>
-#include <asm/mpspec.h>
-#include <asm/pci_x86.h>
-#include <asm/numaq.h>
-
-#define BUS2QUAD(global) (mp_bus_id_to_node[global])
-
-#define BUS2LOCAL(global) (mp_bus_id_to_local[global])
-
-#define QUADLOCAL2BUS(quad,local) (quad_local_to_mp_bus_id[quad][local])
-
-#define PCI_CONF1_MQ_ADDRESS(bus, devfn, reg) \
-       (0x80000000 | (BUS2LOCAL(bus) << 16) | (devfn << 8) | (reg & ~3))
-
-static void write_cf8(unsigned bus, unsigned devfn, unsigned reg)
-{
-       unsigned val = PCI_CONF1_MQ_ADDRESS(bus, devfn, reg);
-       if (xquad_portio)
-               writel(val, XQUAD_PORT_ADDR(0xcf8, BUS2QUAD(bus)));
-       else
-               outl(val, 0xCF8);
-}
-
-static int pci_conf1_mq_read(unsigned int seg, unsigned int bus,
-                            unsigned int devfn, int reg, int len, u32 *value)
-{
-       unsigned long flags;
-       void *adr __iomem = XQUAD_PORT_ADDR(0xcfc, BUS2QUAD(bus));
-
-       WARN_ON(seg);
-       if (!value || (bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255))
-               return -EINVAL;
-
-       raw_spin_lock_irqsave(&pci_config_lock, flags);
-
-       write_cf8(bus, devfn, reg);
-
-       switch (len) {
-       case 1:
-               if (xquad_portio)
-                       *value = readb(adr + (reg & 3));
-               else
-                       *value = inb(0xCFC + (reg & 3));
-               break;
-       case 2:
-               if (xquad_portio)
-                       *value = readw(adr + (reg & 2));
-               else
-                       *value = inw(0xCFC + (reg & 2));
-               break;
-       case 4:
-               if (xquad_portio)
-                       *value = readl(adr);
-               else
-                       *value = inl(0xCFC);
-               break;
-       }
-
-       raw_spin_unlock_irqrestore(&pci_config_lock, flags);
-
-       return 0;
-}
-
-static int pci_conf1_mq_write(unsigned int seg, unsigned int bus,
-                             unsigned int devfn, int reg, int len, u32 value)
-{
-       unsigned long flags;
-       void *adr __iomem = XQUAD_PORT_ADDR(0xcfc, BUS2QUAD(bus));
-
-       WARN_ON(seg);
-       if ((bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255)) 
-               return -EINVAL;
-
-       raw_spin_lock_irqsave(&pci_config_lock, flags);
-
-       write_cf8(bus, devfn, reg);
-
-       switch (len) {
-       case 1:
-               if (xquad_portio)
-                       writeb(value, adr + (reg & 3));
-               else
-                       outb((u8)value, 0xCFC + (reg & 3));
-               break;
-       case 2:
-               if (xquad_portio)
-                       writew(value, adr + (reg & 2));
-               else
-                       outw((u16)value, 0xCFC + (reg & 2));
-               break;
-       case 4:
-               if (xquad_portio)
-                       writel(value, adr + reg);
-               else
-                       outl((u32)value, 0xCFC);
-               break;
-       }
-
-       raw_spin_unlock_irqrestore(&pci_config_lock, flags);
-
-       return 0;
-}
-
-#undef PCI_CONF1_MQ_ADDRESS
-
-static const struct pci_raw_ops pci_direct_conf1_mq = {
-       .read   = pci_conf1_mq_read,
-       .write  = pci_conf1_mq_write
-};
-
-
-static void pci_fixup_i450nx(struct pci_dev *d)
-{
-       /*
-        * i450NX -- Find and scan all secondary buses on all PXB's.
-        */
-       int pxb, reg;
-       u8 busno, suba, subb;
-       int quad = BUS2QUAD(d->bus->number);
-
-       dev_info(&d->dev, "searching for i450NX host bridges\n");
-       reg = 0xd0;
-       for(pxb=0; pxb<2; pxb++) {
-               pci_read_config_byte(d, reg++, &busno);
-               pci_read_config_byte(d, reg++, &suba);
-               pci_read_config_byte(d, reg++, &subb);
-               dev_dbg(&d->dev, "i450NX PXB %d: %02x/%02x/%02x\n",
-                       pxb, busno, suba, subb);
-               if (busno) {
-                       /* Bus A */
-                       pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, busno));
-               }
-               if (suba < subb) {
-                       /* Bus B */
-                       pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, suba+1));
-               }
-       }
-       pcibios_last_bus = -1;
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82451NX, pci_fixup_i450nx);
-
-int __init pci_numaq_init(void)
-{
-       int quad;
-
-       raw_pci_ops = &pci_direct_conf1_mq;
-
-       pcibios_scan_root(0);
-       if (num_online_nodes() > 1)
-               for_each_online_node(quad) {
-                       if (quad == 0)
-                               continue;
-                       printk("Scanning PCI bus %d for quad %d\n", 
-                               QUADLOCAL2BUS(quad,0), quad);
-                       pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, 0));
-               }
-       return 0;
-}