serial: amba-pl011: factor out code for writing LCR_H register

The code to cope with a split tx/rx LCR_H register is non-trivial
so put it into it's own function to avoid duplication.

Signed-off-by: Jon Medhurst <tixy@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index a576a5bc2d1529bf9f725f217fee89ed9aea6a85..844bfba9d0ab48ad29f3f8529c0b1716b8f5f477 100644 (file)
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1511,6 +1511,21 @@ static int pl011_hwinit(struct uart_port *port)
        return retval;
 }
 
+static void pl011_write_lcr_h(struct uart_amba_port *uap, unsigned int lcr_h)
+{
+       writew(lcr_h, uap->port.membase + uap->lcrh_rx);
+       if (uap->lcrh_rx != uap->lcrh_tx) {
+               int i;
+               /*
+                * Wait 10 PCLKs before writing LCRH_TX register,
+                * to get this delay write read only register 10 times
+                */
+               for (i = 0; i < 10; ++i)
+                       writew(0xff, uap->port.membase + UART011_MIS);
+               writew(lcr_h, uap->port.membase + uap->lcrh_tx);
+       }
+}
+
 static int pl011_startup(struct uart_port *port)
 {
        struct uart_amba_port *uap = (struct uart_amba_port *)port;
@@ -1541,17 +1556,7 @@ static int pl011_startup(struct uart_port *port)
        writew(cr, uap->port.membase + UART011_CR);
        writew(0, uap->port.membase + UART011_FBRD);
        writew(1, uap->port.membase + UART011_IBRD);
-       writew(0, uap->port.membase + uap->lcrh_rx);
-       if (uap->lcrh_tx != uap->lcrh_rx) {
-               int i;
-               /*
-                * Wait 10 PCLKs before writing LCRH_TX register,
-                * to get this delay write read only register 10 times
-                */
-               for (i = 0; i < 10; ++i)
-                       writew(0xff, uap->port.membase + UART011_MIS);
-               writew(0, uap->port.membase + uap->lcrh_tx);
-       }
+       pl011_write_lcr_h(uap, 0);
        writew(0, uap->port.membase + UART01x_DR);
        while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY)
                barrier();
@@ -1801,17 +1806,7 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
         * UART011_FBRD & UART011_IBRD.
         * ----------^----------^----------^----------^-----
         */
-       writew(lcr_h, port->membase + uap->lcrh_rx);
-       if (uap->lcrh_rx != uap->lcrh_tx) {
-               int i;
-               /*
-                * Wait 10 PCLKs before writing LCRH_TX register,
-                * to get this delay write read only register 10 times
-                */
-               for (i = 0; i < 10; ++i)
-                       writew(0xff, uap->port.membase + UART011_MIS);
-               writew(lcr_h, port->membase + uap->lcrh_tx);
-       }
+       pl011_write_lcr_h(uap, lcr_h);
        writew(old_cr, port->membase + UART011_CR);
 
        spin_unlock_irqrestore(&port->lock, flags);