+++ /dev/null
-/*
- * arch/arm/mach-at91/include/mach/at91sam9_smc.h
- *
- * Copyright (C) 2007 Andrew Victor
- * Copyright (C) 2007 Atmel Corporation.
- *
- * Static Memory Controllers (SMC) - System peripherals registers.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9_SMC_H
-#define AT91SAM9_SMC_H
-
-#ifndef __ASSEMBLY__
-struct sam9_smc_config {
- /* Setup register */
- u8 ncs_read_setup;
- u8 nrd_setup;
- u8 ncs_write_setup;
- u8 nwe_setup;
-
- /* Pulse register */
- u8 ncs_read_pulse;
- u8 nrd_pulse;
- u8 ncs_write_pulse;
- u8 nwe_pulse;
-
- /* Cycle register */
- u16 read_cycle;
- u16 write_cycle;
-
- /* Mode register */
- u32 mode;
- u8 tdf_cycles:4;
-};
-
-extern void sam9_smc_configure(int id, int cs, struct sam9_smc_config *config);
-extern void sam9_smc_read(int id, int cs, struct sam9_smc_config *config);
-extern void sam9_smc_read_mode(int id, int cs, struct sam9_smc_config *config);
-extern void sam9_smc_write_mode(int id, int cs, struct sam9_smc_config *config);
-#endif
-
-#define AT91_SMC_SETUP 0x00 /* Setup Register for CS n */
-#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */
-#define AT91_SMC_NWESETUP_(x) ((x) << 0)
-#define AT91_SMC_NCS_WRSETUP (0x3f << 8) /* NCS Setup Length in Write Access */
-#define AT91_SMC_NCS_WRSETUP_(x) ((x) << 8)
-#define AT91_SMC_NRDSETUP (0x3f << 16) /* NRD Setup Length */
-#define AT91_SMC_NRDSETUP_(x) ((x) << 16)
-#define AT91_SMC_NCS_RDSETUP (0x3f << 24) /* NCS Setup Length in Read Access */
-#define AT91_SMC_NCS_RDSETUP_(x) ((x) << 24)
-
-#define AT91_SMC_PULSE 0x04 /* Pulse Register for CS n */
-#define AT91_SMC_NWEPULSE (0x7f << 0) /* NWE Pulse Length */
-#define AT91_SMC_NWEPULSE_(x) ((x) << 0)
-#define AT91_SMC_NCS_WRPULSE (0x7f << 8) /* NCS Pulse Length in Write Access */
-#define AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
-#define AT91_SMC_NRDPULSE (0x7f << 16) /* NRD Pulse Length */
-#define AT91_SMC_NRDPULSE_(x) ((x) << 16)
-#define AT91_SMC_NCS_RDPULSE (0x7f << 24) /* NCS Pulse Length in Read Access */
-#define AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
-
-#define AT91_SMC_CYCLE 0x08 /* Cycle Register for CS n */
-#define AT91_SMC_NWECYCLE (0x1ff << 0 ) /* Total Write Cycle Length */
-#define AT91_SMC_NWECYCLE_(x) ((x) << 0)
-#define AT91_SMC_NRDCYCLE (0x1ff << 16) /* Total Read Cycle Length */
-#define AT91_SMC_NRDCYCLE_(x) ((x) << 16)
-
-#define AT91_SMC_MODE 0x0c /* Mode Register for CS n */
-#define AT91_SMC_READMODE (1 << 0) /* Read Mode */
-#define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */
-#define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */
-#define AT91_SMC_EXNWMODE_DISABLE (0 << 4)
-#define AT91_SMC_EXNWMODE_FROZEN (2 << 4)
-#define AT91_SMC_EXNWMODE_READY (3 << 4)
-#define AT91_SMC_BAT (1 << 8) /* Byte Access Type */
-#define AT91_SMC_BAT_SELECT (0 << 8)
-#define AT91_SMC_BAT_WRITE (1 << 8)
-#define AT91_SMC_DBW (3 << 12) /* Data Bus Width */
-#define AT91_SMC_DBW_8 (0 << 12)
-#define AT91_SMC_DBW_16 (1 << 12)
-#define AT91_SMC_DBW_32 (2 << 12)
-#define AT91_SMC_TDF (0xf << 16) /* Data Float Time. */
-#define AT91_SMC_TDF_(x) ((x) << 16)
-#define AT91_SMC_TDFMODE (1 << 20) /* TDF Optimization - Enabled */
-#define AT91_SMC_PMEN (1 << 24) /* Page Mode Enabled */
-#define AT91_SMC_PS (3 << 28) /* Page Size */
-#define AT91_SMC_PS_4 (0 << 28)
-#define AT91_SMC_PS_8 (1 << 28)
-#define AT91_SMC_PS_16 (2 << 28)
-#define AT91_SMC_PS_32 (3 << 28)
-
-#endif
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91/sam9_smc.c
- *
- * Copyright (C) 2008 Andrew Victor
- * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-#include <mach/at91sam9_smc.h>
-
-#include "sam9_smc.h"
-
-
-#define AT91_SMC_CS(id, n) (smc_base_addr[id] + ((n) * 0x10))
-
-static void __iomem *smc_base_addr[2];
-
-static void sam9_smc_cs_write_mode(void __iomem *base,
- struct sam9_smc_config *config)
-{
- __raw_writel(config->mode
- | AT91_SMC_TDF_(config->tdf_cycles),
- base + AT91_SMC_MODE);
-}
-
-void sam9_smc_write_mode(int id, int cs,
- struct sam9_smc_config *config)
-{
- sam9_smc_cs_write_mode(AT91_SMC_CS(id, cs), config);
-}
-EXPORT_SYMBOL_GPL(sam9_smc_write_mode);
-
-static void sam9_smc_cs_configure(void __iomem *base,
- struct sam9_smc_config *config)
-{
-
- /* Setup register */
- __raw_writel(AT91_SMC_NWESETUP_(config->nwe_setup)
- | AT91_SMC_NCS_WRSETUP_(config->ncs_write_setup)
- | AT91_SMC_NRDSETUP_(config->nrd_setup)
- | AT91_SMC_NCS_RDSETUP_(config->ncs_read_setup),
- base + AT91_SMC_SETUP);
-
- /* Pulse register */
- __raw_writel(AT91_SMC_NWEPULSE_(config->nwe_pulse)
- | AT91_SMC_NCS_WRPULSE_(config->ncs_write_pulse)
- | AT91_SMC_NRDPULSE_(config->nrd_pulse)
- | AT91_SMC_NCS_RDPULSE_(config->ncs_read_pulse),
- base + AT91_SMC_PULSE);
-
- /* Cycle register */
- __raw_writel(AT91_SMC_NWECYCLE_(config->write_cycle)
- | AT91_SMC_NRDCYCLE_(config->read_cycle),
- base + AT91_SMC_CYCLE);
-
- /* Mode register */
- sam9_smc_cs_write_mode(base, config);
-}
-
-void sam9_smc_configure(int id, int cs,
- struct sam9_smc_config *config)
-{
- sam9_smc_cs_configure(AT91_SMC_CS(id, cs), config);
-}
-EXPORT_SYMBOL_GPL(sam9_smc_configure);
-
-static void sam9_smc_cs_read_mode(void __iomem *base,
- struct sam9_smc_config *config)
-{
- u32 val = __raw_readl(base + AT91_SMC_MODE);
-
- config->mode = (val & ~AT91_SMC_NWECYCLE);
- config->tdf_cycles = (val & AT91_SMC_NWECYCLE) >> 16 ;
-}
-
-void sam9_smc_read_mode(int id, int cs,
- struct sam9_smc_config *config)
-{
- sam9_smc_cs_read_mode(AT91_SMC_CS(id, cs), config);
-}
-EXPORT_SYMBOL_GPL(sam9_smc_read_mode);
-
-static void sam9_smc_cs_read(void __iomem *base,
- struct sam9_smc_config *config)
-{
- u32 val;
-
- /* Setup register */
- val = __raw_readl(base + AT91_SMC_SETUP);
-
- config->nwe_setup = val & AT91_SMC_NWESETUP;
- config->ncs_write_setup = (val & AT91_SMC_NCS_WRSETUP) >> 8;
- config->nrd_setup = (val & AT91_SMC_NRDSETUP) >> 16;
- config->ncs_read_setup = (val & AT91_SMC_NCS_RDSETUP) >> 24;
-
- /* Pulse register */
- val = __raw_readl(base + AT91_SMC_PULSE);
-
- config->nwe_pulse = val & AT91_SMC_NWEPULSE;
- config->ncs_write_pulse = (val & AT91_SMC_NCS_WRPULSE) >> 8;
- config->nrd_pulse = (val & AT91_SMC_NRDPULSE) >> 16;
- config->ncs_read_pulse = (val & AT91_SMC_NCS_RDPULSE) >> 24;
-
- /* Cycle register */
- val = __raw_readl(base + AT91_SMC_CYCLE);
-
- config->write_cycle = val & AT91_SMC_NWECYCLE;
- config->read_cycle = (val & AT91_SMC_NRDCYCLE) >> 16;
-
- /* Mode register */
- sam9_smc_cs_read_mode(base, config);
-}
-
-void sam9_smc_read(int id, int cs, struct sam9_smc_config *config)
-{
- sam9_smc_cs_read(AT91_SMC_CS(id, cs), config);
-}
-
-void __init at91sam9_ioremap_smc(int id, u32 addr)
-{
- if (id > 1) {
- pr_warn("%s: id > 2\n", __func__);
- return;
- }
- smc_base_addr[id] = ioremap(addr, 512);
- if (!smc_base_addr[id])
- pr_warn("Impossible to ioremap smc.%d 0x%x\n", id, addr);
-}
projects / linux-beck.git / commitdiff