* 'oprofile-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (55 commits)
arch/x86/oprofile/op_model_amd.c: fix op_amd_handle_ibs() return type
Revert "x86: oprofile/op_model_amd.c set return values for op_amd_handle_ibs()"
x86/oprofile: Small coding style fixes
x86/oprofile: Add counter reservation check for virtual counters
x86/oprofile: Implement op_x86_virt_to_phys()
oprofile: Adding switch counter to oprofile statistic variables
x86/oprofile: Implement mux_clone()
x86/oprofile: Enable multiplexing only if the model supports it
x86/oprofile: Add function has_mux() to check multiplexing support
x86/oprofile: Modify initialization of num_virt_counters
x86/oprofile: Remove unused num_virt_controls from struct op_x86_model_spec
x86/oprofile: Remove const qualifier from struct op_x86_model_spec
x86/oprofile: Moving nmi_cpu_switch() in nmi_int.c
x86/oprofile: Moving nmi_cpu_save/restore_mpx_registers() in nmi_int.c
x86/oprofile: Moving nmi_setup_cpu_mux() in nmi_int.c
x86/oprofile: Implement multiplexing setup/shutdown functions
oprofile: Grouping multiplexing code in op_model_amd.c
oprofile: Introduce op_x86_phys_to_virt()
oprofile: Grouping multiplexing code in oprof.c
oprofile: Remove oprofile_multiplexing_init()
...
D: The Linux Support Team Erlangen
N: Andreas Koensgen
-E: ajk@iehk.rwth-aachen.de
+E: ajk@comnets.uni-bremen.de
D: 6pack driver for AX.25
N: Harald Koerfgen
D: Soundblaster driver fixes, ISAPnP quirk
S: California, USA
+N: Jonathan Layes
+D: ARPD support
+
N: Tom Lees
E: tom@lpsg.demon.co.uk
W: http://www.lpsg.demon.co.uk/
S: 2612 XV Delft
S: The Netherlands
+N: Thomas Woller
+D: CS461x Cirrus Logic sound driver
+
N: David Woodhouse
E: dwmw2@infradead.org
D: JFFS2 file system, Memory Technology Device subsystem,
Date: May 2009
Contact: Martin K. Petersen <martin.petersen@oracle.com>
Description:
- This is the smallest unit the storage device can write
- without resorting to read-modify-write operation. It is
- usually the same as the logical block size but may be
- bigger. One example is SATA drives with 4KB sectors
- that expose a 512-byte logical block size to the
- operating system.
+ This is the smallest unit a physical storage device can
+ write atomically. It is usually the same as the logical
+ block size but may be bigger. One example is SATA
+ drives with 4KB sectors that expose a 512-byte logical
+ block size to the operating system. For stacked block
+ devices the physical_block_size variable contains the
+ maximum physical_block_size of the component devices.
What: /sys/block/<disk>/queue/minimum_io_size
Date: April 2009
Contact: Martin K. Petersen <martin.petersen@oracle.com>
Description:
- Storage devices may report a preferred minimum I/O size,
- which is the smallest request the device can perform
- without incurring a read-modify-write penalty. For disk
- drives this is often the physical block size. For RAID
- arrays it is often the stripe chunk size.
+ Storage devices may report a granularity or preferred
+ minimum I/O size which is the smallest request the
+ device can perform without incurring a performance
+ penalty. For disk drives this is often the physical
+ block size. For RAID arrays it is often the stripe
+ chunk size. A properly aligned multiple of
+ minimum_io_size is the preferred request size for
+ workloads where a high number of I/O operations is
+ desired.
What: /sys/block/<disk>/queue/optimal_io_size
Date: April 2009
Contact: Martin K. Petersen <martin.petersen@oracle.com>
Description:
Storage devices may report an optimal I/O size, which is
- the device's preferred unit of receiving I/O. This is
- rarely reported for disk drives. For RAID devices it is
- usually the stripe width or the internal block size.
+ the device's preferred unit for sustained I/O. This is
+ rarely reported for disk drives. For RAID arrays it is
+ usually the stripe width or the internal track size. A
+ properly aligned multiple of optimal_io_size is the
+ preferred request size for workloads where sustained
+ throughput is desired. If no optimal I/O size is
+ reported this file contains 0.
</para>
<programlisting>
-__u32 ipaddress;
-printk(KERN_INFO "my ip: %d.%d.%d.%d\n", NIPQUAD(ipaddress));
+__be32 ipaddress;
+printk(KERN_INFO "my ip: %pI4\n", &ipaddress);
</programlisting>
<para>
RCU, realtime RCU, sleepable RCU, performance.
"
}
+
+@article{PaulEMcKenney2008RCUOSR
+,author="Paul E. McKenney and Jonathan Walpole"
+,title="Introducing technology into the {Linux} kernel: a case study"
+,Year="2008"
+,journal="SIGOPS Oper. Syst. Rev."
+,volume="42"
+,number="5"
+,pages="4--17"
+,issn="0163-5980"
+,doi={http://doi.acm.org/10.1145/1400097.1400099}
+,publisher="ACM"
+,address="New York, NY, USA"
+,annotation={
+ Linux changed RCU to a far greater degree than RCU has changed Linux.
+}
+}
+
+@unpublished{PaulEMcKenney2008HierarchicalRCU
+,Author="Paul E. McKenney"
+,Title="Hierarchical {RCU}"
+,month="November"
+,day="3"
+,year="2008"
+,note="Available:
+\url{http://lwn.net/Articles/305782/}
+[Viewed November 6, 2008]"
+,annotation="
+ RCU with combining-tree-based grace-period detection,
+ permitting it to handle thousands of CPUs.
+"
+}
+
+@conference{PaulEMcKenney2009MaliciousURCU
+,Author="Paul E. McKenney"
+,Title="Using a Malicious User-Level {RCU} to Torture {RCU}-Based Algorithms"
+,Booktitle="linux.conf.au 2009"
+,month="January"
+,year="2009"
+,address="Hobart, Australia"
+,note="Available:
+\url{http://www.rdrop.com/users/paulmck/RCU/urcutorture.2009.01.22a.pdf}
+[Viewed February 2, 2009]"
+,annotation="
+ Realtime RCU and torture-testing RCU uses.
+"
+}
+
+@unpublished{MathieuDesnoyers2009URCU
+,Author="Mathieu Desnoyers"
+,Title="[{RFC} git tree] Userspace {RCU} (urcu) for {Linux}"
+,month="February"
+,day="5"
+,year="2009"
+,note="Available:
+\url{http://lkml.org/lkml/2009/2/5/572}
+\url{git://lttng.org/userspace-rcu.git}
+[Viewed February 20, 2009]"
+,annotation="
+ Mathieu Desnoyers's user-space RCU implementation.
+ git://lttng.org/userspace-rcu.git
+"
+}
+
+@unpublished{PaulEMcKenney2009BloatWatchRCU
+,Author="Paul E. McKenney"
+,Title="{RCU}: The {Bloatwatch} Edition"
+,month="March"
+,day="17"
+,year="2009"
+,note="Available:
+\url{http://lwn.net/Articles/323929/}
+[Viewed March 20, 2009]"
+,annotation="
+ Uniprocessor assumptions allow simplified RCU implementation.
+"
+}
A common misconception is that, on UP systems, the call_rcu() primitive
-may immediately invoke its function, and that the synchronize_rcu()
-primitive may return immediately. The basis of this misconception
+may immediately invoke its function. The basis of this misconception
is that since there is only one CPU, it should not be necessary to
wait for anything else to get done, since there are no other CPUs for
anything else to be happening on. Although this approach will -sort- -of-
work a surprising amount of the time, it is a very bad idea in general.
-This document presents three examples that demonstrate exactly how bad an
-idea this is.
+This document presents three examples that demonstrate exactly how bad
+an idea this is.
Example 1: softirq Suicide
Summary
-Permitting call_rcu() to immediately invoke its arguments or permitting
-synchronize_rcu() to immediately return breaks RCU, even on a UP system.
-So do not do it! Even on a UP system, the RCU infrastructure -must-
-respect grace periods, and -must- invoke callbacks from a known environment
-in which no locks are held.
+Permitting call_rcu() to immediately invoke its arguments breaks RCU,
+even on a UP system. So do not do it! Even on a UP system, the RCU
+infrastructure -must- respect grace periods, and -must- invoke callbacks
+from a known environment in which no locks are held.
+
+It -is- safe for synchronize_sched() and synchronize_rcu_bh() to return
+immediately on an UP system. It is also safe for synchronize_rcu()
+to return immediately on UP systems, except when running preemptable
+RCU.
+
+Quick Quiz #3: Why can't synchronize_rcu() return immediately on
+ UP systems running preemptable RCU?
Answer to Quick Quiz #1:
callbacks acquire locks directly. However, a great many RCU
callbacks do acquire locks -indirectly-, for example, via
the kfree() primitive.
+
+Answer to Quick Quiz #3:
+ Why can't synchronize_rcu() return immediately on UP systems
+ running preemptable RCU?
+
+ Because some other task might have been preempted in the middle
+ of an RCU read-side critical section. If synchronize_rcu()
+ simply immediately returned, it would prematurely signal the
+ end of the grace period, which would come as a nasty shock to
+ that other thread when it started running again.
structure is updated more than about 10% of the time, then
you should strongly consider some other approach, unless
detailed performance measurements show that RCU is nonetheless
- the right tool for the job.
+ the right tool for the job. Yes, you might think of RCU
+ as simply cutting overhead off of the readers and imposing it
+ on the writers. That is exactly why normal uses of RCU will
+ do much more reading than updating.
Another exception is where performance is not an issue, and RCU
provides a simpler implementation. An example of this situation
instead need to use synchronize_irq() or synchronize_sched().
12. Any lock acquired by an RCU callback must be acquired elsewhere
- with irq disabled, e.g., via spin_lock_irqsave(). Failing to
- disable irq on a given acquisition of that lock will result in
- deadlock as soon as the RCU callback happens to interrupt that
- acquisition's critical section.
+ with softirq disabled, e.g., via spin_lock_irqsave(),
+ spin_lock_bh(), etc. Failing to disable irq on a given
+ acquisition of that lock will result in deadlock as soon as the
+ RCU callback happens to interrupt that acquisition's critical
+ section.
13. RCU callbacks can be and are executed in parallel. In many cases,
the callback code simply wrappers around kfree(), so that this
Because these primitives only wait for pre-existing readers,
it is the caller's responsibility to guarantee safety to
any subsequent readers.
+
+16. The various RCU read-side primitives do -not- contain memory
+ barriers. The CPU (and in some cases, the compiler) is free
+ to reorder code into and out of RCU read-side critical sections.
+ It is the responsibility of the RCU update-side primitives to
+ deal with this.
executed in user mode, or executed in the idle loop, we can
safely free up that item.
- Preemptible variants of RCU (CONFIG_PREEMPT_RCU) get the
+ Preemptible variants of RCU (CONFIG_TREE_PREEMPT_RCU) get the
same effect, but require that the readers manipulate CPU-local
counters. These counters allow limited types of blocking
within RCU read-side critical sections. SRCU also uses
o I hear that RCU needs work in order to support realtime kernels?
This work is largely completed. Realtime-friendly RCU can be
- enabled via the CONFIG_PREEMPT_RCU kernel configuration parameter.
- However, work is in progress for enabling priority boosting of
- preempted RCU read-side critical sections. This is needed if you
- have CPU-bound realtime threads.
+ enabled via the CONFIG_TREE_PREEMPT_RCU kernel configuration
+ parameter. However, work is in progress for enabling priority
+ boosting of preempted RCU read-side critical sections. This is
+ needed if you have CPU-bound realtime threads.
o Where can I find more information on RCU?
the timers, and only then invoke rcu_barrier() to wait for any remaining
RCU callbacks to complete.
+Of course, if you module uses call_rcu_bh(), you will need to invoke
+rcu_barrier_bh() before unloading. Similarly, if your module uses
+call_rcu_sched(), you will need to invoke rcu_barrier_sched() before
+unloading. If your module uses call_rcu(), call_rcu_bh(), -and-
+call_rcu_sched(), then you will need to invoke each of rcu_barrier(),
+rcu_barrier_bh(), and rcu_barrier_sched().
+
Implementing rcu_barrier()
obj = kmem_cache_alloc(...);
lock_chain(); // typically a spin_lock()
obj->key = key;
-atomic_inc(&obj->refcnt);
/*
* we need to make sure obj->key is updated before obj->next
+ * or obj->refcnt
*/
smp_wmb();
+atomic_set(&obj->refcnt, 1);
hlist_add_head_rcu(&obj->obj_node, list);
unlock_chain(); // typically a spin_unlock()
obj = kmem_cache_alloc(cachep);
lock_chain(); // typically a spin_lock()
obj->key = key;
+/*
+ * changes to obj->key must be visible before refcnt one
+ */
+smp_wmb();
atomic_set(&obj->refcnt, 1);
/*
* insert obj in RCU way (readers might be traversing chain)
"rcu_sync" for rcu_read_lock() with synchronous reclamation,
"rcu_bh" for the rcu_read_lock_bh() API, "rcu_bh_sync" for
rcu_read_lock_bh() with synchronous reclamation, "srcu" for
- the "srcu_read_lock()" API, and "sched" for the use of
- preempt_disable() together with synchronize_sched().
+ the "srcu_read_lock()" API, "sched" for the use of
+ preempt_disable() together with synchronize_sched(),
+ and "sched_expedited" for the use of preempt_disable()
+ with synchronize_sched_expedited().
verbose Enable debug printk()s. Default is disabled.
"idx" value maps the "old" and "current" values to the underlying array,
and is useful for debugging.
+Similarly, sched_expedited RCU provides the following:
+
+ sched_expedited-torture: rtc: d0000000016c1880 ver: 1090796 tfle: 0 rta: 1090796 rtaf: 0 rtf: 1090787 rtmbe: 0 nt: 27713319
+ sched_expedited-torture: Reader Pipe: 12660320201 95875 0 0 0 0 0 0 0 0 0
+ sched_expedited-torture: Reader Batch: 12660424885 0 0 0 0 0 0 0 0 0 0
+ sched_expedited-torture: Free-Block Circulation: 1090795 1090795 1090794 1090793 1090792 1090791 1090790 1090789 1090788 1090787 0
+ state: -1 / 0:0 3:0 4:0
+
+As before, the first four lines are similar to those for RCU.
+The last line shows the task-migration state. The first number is
+-1 if synchronize_sched_expedited() is idle, -2 if in the process of
+posting wakeups to the migration kthreads, and N when waiting on CPU N.
+Each of the colon-separated fields following the "/" is a CPU:state pair.
+Valid states are "0" for idle, "1" for waiting for quiescent state,
+"2" for passed through quiescent state, and "3" when a race with a
+CPU-hotplug event forces use of the synchronize_sched() primitive.
+
USAGE
The output of "cat rcu/rcudata" looks as follows:
-rcu:
-rcu:
+rcu_sched:
0 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=10951/1 dn=0 df=1101 of=0 ri=36 ql=0 b=10
1 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=16117/1 dn=0 df=1015 of=0 ri=0 ql=0 b=10
2 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=1445/1 dn=0 df=1839 of=0 ri=0 ql=0 b=10
The output of "cat rcu/rcugp" looks as follows:
-rcu: completed=33062 gpnum=33063
+rcu_sched: completed=33062 gpnum=33063
rcu_bh: completed=464 gpnum=464
Again, this output is for both "rcu" and "rcu_bh". The fields are
The output of "cat rcu/rcu_pending" looks as follows:
-rcu:
+rcu_sched:
0 np=255892 qsp=53936 cbr=0 cng=14417 gpc=10033 gps=24320 nf=6445 nn=146741
1 np=261224 qsp=54638 cbr=0 cng=25723 gpc=16310 gps=2849 nf=5912 nn=155792
2 np=237496 qsp=49664 cbr=0 cng=2762 gpc=45478 gps=1762 nf=1201 nn=136629
Used by a reader to inform the reclaimer that the reader is
entering an RCU read-side critical section. It is illegal
to block while in an RCU read-side critical section, though
- kernels built with CONFIG_PREEMPT_RCU can preempt RCU read-side
- critical sections. Any RCU-protected data structure accessed
- during an RCU read-side critical section is guaranteed to remain
- unreclaimed for the full duration of that critical section.
+ kernels built with CONFIG_TREE_PREEMPT_RCU can preempt RCU
+ read-side critical sections. Any RCU-protected data structure
+ accessed during an RCU read-side critical section is guaranteed to
+ remain unreclaimed for the full duration of that critical section.
Reference counts may be used in conjunction with RCU to maintain
longer-term references to data structures.
rcu_dereference
list_for_each_entry_rcu
hlist_for_each_entry_rcu
+ hlist_nulls_for_each_entry_rcu
list_for_each_continue_rcu (to be deprecated in favor of new
list_for_each_entry_continue_rcu)
rcu_read_lock synchronize_net rcu_barrier
rcu_read_unlock synchronize_rcu
+ synchronize_rcu_expedited
call_rcu
bh: Critical sections Grace period Barrier
rcu_read_lock_bh call_rcu_bh rcu_barrier_bh
- rcu_read_unlock_bh
+ rcu_read_unlock_bh synchronize_rcu_bh
+ synchronize_rcu_bh_expedited
sched: Critical sections Grace period Barrier
- [preempt_disable] synchronize_sched rcu_barrier_sched
- [and friends] call_rcu_sched
+ rcu_read_lock_sched synchronize_sched rcu_barrier_sched
+ rcu_read_unlock_sched call_rcu_sched
+ [preempt_disable] synchronize_sched_expedited
+ [and friends]
SRCU: Critical sections Grace period Barrier
srcu_read_lock synchronize_srcu N/A
srcu_read_unlock
+SRCU: Initialization/cleanup
+ init_srcu_struct
+ cleanup_srcu_struct
See the comment headers in the source code (or the docbook generated
from them) for more information.
For SA11xx and Xscale, this is used to
setup a minicache mapping.
+ffff4000 ffffffff cache aliasing on ARMv6 and later CPUs.
+
ffff1000 ffff7fff Reserved.
Platforms must not use this address range.
/*
* cn_test.c
*
- * 2004-2005 Copyright (c) Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * 2004+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net>
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
module_exit(cn_test_fini);
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>");
+MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
MODULE_DESCRIPTION("Connector's test module");
/*
* ucon.c
*
- * Copyright (c) 2004+ Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * Copyright (c) 2004+ Evgeniy Polyakov <zbr@ioremap.net>
*
*
* This program is free software; you can redistribute it and/or modify
-----------------------------
-What: obsolete generic irq defines and typedefs
-When: 2.6.30
-Why: The defines and typedefs (hw_interrupt_type, no_irq_type, irq_desc_t)
- have been kept around for migration reasons. After more than two years
- it's time to remove them finally
-Who: Thomas Gleixner <tglx@linutronix.de>
-
----------------------------
-
What: fakephp and associated sysfs files in /sys/bus/pci/slots/
When: 2011
Why: In 2.6.27, the semantics of /sys/bus/pci/slots was redefined to
cpufreq core and contained inside cpufreq.c. Other dependent
drivers should not use it in order to safely avoid lockdep issues.
Who: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+
+----------------------------
+
+What: sound-slot/service-* module aliases and related clutters in
+ sound/sound_core.c
+When: August 2010
+Why: OSS sound_core grabs all legacy minors (0-255) of SOUND_MAJOR
+ (14) and requests modules using custom sound-slot/service-*
+ module aliases. The only benefit of doing this is allowing
+ use of custom module aliases which might as well be considered
+ a bug at this point. This preemptive claiming prevents
+ alternative OSS implementations.
+
+ Till the feature is removed, the kernel will be requesting
+ both sound-slot/service-* and the standard char-major-* module
+ aliases and allow turning off the pre-claiming selectively via
+ CONFIG_SOUND_OSS_CORE_PRECLAIM and soundcore.preclaim_oss
+ kernel parameter.
+
+ After the transition phase is complete, both the custom module
+ aliases and switches to disable it will go away. This removal
+ will also allow making ALSA OSS emulation independent of
+ sound_core. The dependency will be broken then too.
+Who: Tejun Heo <tj@kernel.org>
There are user and developer mailing lists available through the v9fs project
on sourceforge (http://sourceforge.net/projects/v9fs).
+A stand-alone version of the module (which should build for any 2.6 kernel)
+is available via (http://github.com/ericvh/9p-sac/tree/master)
+
News and other information is maintained on SWiK (http://swik.net/v9fs).
Bug reports may be issued through the kernel.org bugzilla
(*) Security (currently only AFS kaserver and KerberosIV tickets).
- (*) File reading.
+ (*) File reading and writing.
(*) Automounting.
-It does not yet support the following AFS features:
-
- (*) Write support.
+ (*) Local caching (via fscache).
- (*) Local caching.
+It does not yet support the following AFS features:
(*) pioctl() system call.
the masks in the following files:
/sys/module/af_rxrpc/parameters/debug
- /sys/module/afs/parameters/debug
+ /sys/module/kafs/parameters/debug
=====
When inserting the driver modules the root cell must be specified along with a
list of volume location server IP addresses:
- insmod af_rxrpc.o
- insmod rxkad.o
- insmod kafs.o rootcell=cambridge.redhat.com:172.16.18.73:172.16.18.91
+ modprobe af_rxrpc
+ modprobe rxkad
+ modprobe kafs rootcell=cambridge.redhat.com:172.16.18.73:172.16.18.91
The first module is the AF_RXRPC network protocol driver. This provides the
RxRPC remote operation protocol and may also be accessed from userspace. See:
Once the module has been loaded, more modules can be added by the following
procedure:
- echo add grand.central.org 18.7.14.88:128.2.191.224 >/proc/fs/afs/cells
+ echo add grand.central.org 18.9.48.14:128.2.203.61:130.237.48.87 >/proc/fs/afs/cells
Where the parameters to the "add" command are the name of a cell and a list of
volume location servers within that cell, with the latter separated by colons.
specify connection to only volumes of those types.
The name of the cell is optional, and if not given during a mount, then the
-named volume will be looked up in the cell specified during insmod.
+named volume will be looked up in the cell specified during modprobe.
Additional cells can be added through /proc (see later section).
The filesystem maintains an internal database of all the cells it knows and the
IP addresses of the volume location servers for those cells. The cell to which
-the system belongs is added to the database when insmod is performed by the
+the system belongs is added to the database when modprobe is performed by the
"rootcell=" argument or, if compiled in, using a "kafs.rootcell=" argument on
the kernel command line.
Further cells can be added by commands similar to the following:
echo add CELLNAME VLADDR[:VLADDR][:VLADDR]... >/proc/fs/afs/cells
- echo add grand.central.org 18.7.14.88:128.2.191.224 >/proc/fs/afs/cells
+ echo add grand.central.org 18.9.48.14:128.2.203.61:130.237.48.87 >/proc/fs/afs/cells
No other cell database operations are available at this time.
mount -t afs \%root.afs. /afs
mount -t afs \%cambridge.redhat.com:root.cell. /afs/cambridge.redhat.com/
-echo add grand.central.org 18.7.14.88:128.2.191.224 > /proc/fs/afs/cells
+echo add grand.central.org 18.9.48.14:128.2.203.61:130.237.48.87 > /proc/fs/afs/cells
mount -t afs "#grand.central.org:root.cell." /afs/grand.central.org/
mount -t afs "#grand.central.org:root.archive." /afs/grand.central.org/archive
mount -t afs "#grand.central.org:root.contrib." /afs/grand.central.org/contrib
3.1 /proc/<pid>/oom_adj - Adjust the oom-killer score
------------------------------------------------------
-This file can be used to adjust the score used to select which processes should
-be killed in an out-of-memory situation. The oom_adj value is a characteristic
-of the task's mm, so all threads that share an mm with pid will have the same
-oom_adj value. A high value will increase the likelihood of this process being
-killed by the oom-killer. Valid values are in the range -16 to +15 as
-explained below and a special value of -17, which disables oom-killing
-altogether for threads sharing pid's mm.
+This file can be used to adjust the score used to select which processes
+should be killed in an out-of-memory situation. Giving it a high score will
+increase the likelihood of this process being killed by the oom-killer. Valid
+values are in the range -16 to +15, plus the special value -17, which disables
+oom-killing altogether for this process.
The process to be killed in an out-of-memory situation is selected among all others
based on its badness score. This value equals the original memory size of the process
are the prime candidates to be killed. Having only one 'hungry' child will make
parent less preferable than the child.
-/proc/<pid>/oom_adj cannot be changed for kthreads since they are immune from
-oom-killing already.
-
/proc/<pid>/oom_score shows process' current badness score.
The following heuristics are then applied:
Using sysfs
~~~~~~~~~~~
-sysfs is always compiled in. You can access it by doing:
+sysfs is always compiled in if CONFIG_SYSFS is defined. You can access
+it by doing:
mount -t sysfs sysfs /sys
'm' all linux/synclink.h conflict!
'm' 00-1F net/irda/irmod.h conflict!
'n' 00-7F linux/ncp_fs.h
+'n' 80-8F linux/nilfs2_fs.h NILFS2
'n' E0-FF video/matrox.h matroxfb
'o' 00-1F fs/ocfs2/ocfs2_fs.h OCFS2
'o' 00-03 include/mtd/ubi-user.h conflict! (OCFS2 and UBI overlaps)
libata.dma=4 Compact Flash DMA only
Combinations also work, so libata.dma=3 enables DMA
for disks and CDROMs, but not CFs.
+
+ libata.ignore_hpa= [LIBATA] Ignore HPA limit
+ libata.ignore_hpa=0 keep BIOS limits (default)
+ libata.ignore_hpa=1 ignore limits, using full disk
libata.noacpi [LIBATA] Disables use of ACPI in libata suspend/resume
when set.
- Notes on accessing payload contents
- Defining a key type
- Request-key callback service
- - Key access filesystem
+ - Garbage collection
============
(*) Dead. The key's type was unregistered, and so the key is now useless.
+Keys in the last three states are subject to garbage collection. See the
+section on "Garbage collection".
+
====================
KEY SERVICE OVERVIEW
successful.
+ (*) Install the calling process's session keyring on its parent.
+
+ long keyctl(KEYCTL_SESSION_TO_PARENT);
+
+ This functions attempts to install the calling process's session keyring
+ on to the calling process's parent, replacing the parent's current session
+ keyring.
+
+ The calling process must have the same ownership as its parent, the
+ keyring must have the same ownership as the calling process, the calling
+ process must have LINK permission on the keyring and the active LSM module
+ mustn't deny permission, otherwise error EPERM will be returned.
+
+ Error ENOMEM will be returned if there was insufficient memory to complete
+ the operation, otherwise 0 will be returned to indicate success.
+
+ The keyring will be replaced next time the parent process leaves the
+ kernel and resumes executing userspace.
+
+
===============
KERNEL SERVICES
===============
In this case, the program isn't required to actually attach the key to a ring;
the rings are provided for reference.
+
+
+==================
+GARBAGE COLLECTION
+==================
+
+Dead keys (for which the type has been removed) will be automatically unlinked
+from those keyrings that point to them and deleted as soon as possible by a
+background garbage collector.
+
+Similarly, revoked and expired keys will be garbage collected, but only after a
+certain amount of time has passed. This time is set as a number of seconds in:
+
+ /proc/sys/kernel/keys/gc_delay
# echo scan > /sys/kernel/debug/kmemleak
+To clear the list of all current possible memory leaks:
+
+ # echo clear > /sys/kernel/debug/kmemleak
+
+New leaks will then come up upon reading /sys/kernel/debug/kmemleak
+again.
+
Note that the orphan objects are listed in the order they were allocated
and one object at the beginning of the list may cause other subsequent
objects to be reported as orphan.
scan=<secs> - set the automatic memory scanning period in seconds
(default 600, 0 to stop the automatic scanning)
scan - trigger a memory scan
+ clear - clear list of current memory leak suspects, done by
+ marking all current reported unreferenced objects grey
+ dump=<addr> - dump information about the object found at <addr>
Kmemleak can also be disabled at boot-time by passing "kmemleak=off" on
the kernel command line.
address inside the block address range that need to be found so that the
block is not considered a leak. One example is __vmalloc().
+Testing specific sections with kmemleak
+---------------------------------------
+
+Upon initial bootup your /sys/kernel/debug/kmemleak output page may be
+quite extensive. This can also be the case if you have very buggy code
+when doing development. To work around these situations you can use the
+'clear' command to clear all reported unreferenced objects from the
+/sys/kernel/debug/kmemleak output. By issuing a 'scan' after a 'clear'
+you can find new unreferenced objects; this should help with testing
+specific sections of code.
+
+To test a critical section on demand with a clean kmemleak do:
+
+ # echo clear > /sys/kernel/debug/kmemleak
+ ... test your kernel or modules ...
+ # echo scan > /sys/kernel/debug/kmemleak
+
+Then as usual to get your report with:
+
+ # cat /sys/kernel/debug/kmemleak
+
Kmemleak API
------------
- Bluetooth enable and disable
- video output switching, expansion control
- ThinkLight on and off
- - limited docking and undocking
- - UltraBay eject
- CMOS/UCMS control
- LED control
- ACPI sounds
It is impossible to know if the status returned through sysfs is valid.
-Docking / undocking -- /proc/acpi/ibm/dock
-------------------------------------------
-
-Docking and undocking (e.g. with the X4 UltraBase) requires some
-actions to be taken by the operating system to safely make or break
-the electrical connections with the dock.
-
-The docking feature of this driver generates the following ACPI events:
-
- ibm/dock GDCK 00000003 00000001 -- eject request
- ibm/dock GDCK 00000003 00000002 -- undocked
- ibm/dock GDCK 00000000 00000003 -- docked
-
-NOTE: These events will only be generated if the laptop was docked
-when originally booted. This is due to the current lack of support for
-hot plugging of devices in the Linux ACPI framework. If the laptop was
-booted while not in the dock, the following message is shown in the
-logs:
-
- Mar 17 01:42:34 aero kernel: thinkpad_acpi: dock device not present
-
-In this case, no dock-related events are generated but the dock and
-undock commands described below still work. They can be executed
-manually or triggered by Fn key combinations (see the example acpid
-configuration files included in the driver tarball package available
-on the web site).
-
-When the eject request button on the dock is pressed, the first event
-above is generated. The handler for this event should issue the
-following command:
-
- echo undock > /proc/acpi/ibm/dock
-
-After the LED on the dock goes off, it is safe to eject the laptop.
-Note: if you pressed this key by mistake, go ahead and eject the
-laptop, then dock it back in. Otherwise, the dock may not function as
-expected.
-
-When the laptop is docked, the third event above is generated. The
-handler for this event should issue the following command to fully
-enable the dock:
-
- echo dock > /proc/acpi/ibm/dock
-
-The contents of the /proc/acpi/ibm/dock file shows the current status
-of the dock, as provided by the ACPI framework.
-
-The docking support in this driver does not take care of enabling or
-disabling any other devices you may have attached to the dock. For
-example, a CD drive plugged into the UltraBase needs to be disabled or
-enabled separately. See the provided example acpid configuration files
-for how this can be accomplished.
-
-There is no support yet for PCI devices that may be attached to a
-docking station, e.g. in the ThinkPad Dock II. The driver currently
-does not recognize, enable or disable such devices. This means that
-the only docking stations currently supported are the X-series
-UltraBase docks and "dumb" port replicators like the Mini Dock (the
-latter don't need any ACPI support, actually).
-
-
-UltraBay eject -- /proc/acpi/ibm/bay
-------------------------------------
-
-Inserting or ejecting an UltraBay device requires some actions to be
-taken by the operating system to safely make or break the electrical
-connections with the device.
-
-This feature generates the following ACPI events:
-
- ibm/bay MSTR 00000003 00000000 -- eject request
- ibm/bay MSTR 00000001 00000000 -- eject lever inserted
-
-NOTE: These events will only be generated if the UltraBay was present
-when the laptop was originally booted (on the X series, the UltraBay
-is in the dock, so it may not be present if the laptop was undocked).
-This is due to the current lack of support for hot plugging of devices
-in the Linux ACPI framework. If the laptop was booted without the
-UltraBay, the following message is shown in the logs:
-
- Mar 17 01:42:34 aero kernel: thinkpad_acpi: bay device not present
-
-In this case, no bay-related events are generated but the eject
-command described below still works. It can be executed manually or
-triggered by a hot key combination.
-
-Sliding the eject lever generates the first event shown above. The
-handler for this event should take whatever actions are necessary to
-shut down the device in the UltraBay (e.g. call idectl), then issue
-the following command:
-
- echo eject > /proc/acpi/ibm/bay
-
-After the LED on the UltraBay goes off, it is safe to pull out the
-device.
-
-When the eject lever is inserted, the second event above is
-generated. The handler for this event should take whatever actions are
-necessary to enable the UltraBay device (e.g. call idectl).
-
-The contents of the /proc/acpi/ibm/bay file shows the current status
-of the UltraBay, as provided by the ACPI framework.
-
-EXPERIMENTAL warm eject support on the 600e/x, A22p and A3x (To use
-this feature, you need to supply the experimental=1 parameter when
-loading the module):
-
-These models do not have a button near the UltraBay device to request
-a hot eject but rather require the laptop to be put to sleep
-(suspend-to-ram) before the bay device is ejected or inserted).
-The sequence of steps to eject the device is as follows:
-
- echo eject > /proc/acpi/ibm/bay
- put the ThinkPad to sleep
- remove the drive
- resume from sleep
- cat /proc/acpi/ibm/bay should show that the drive was removed
-
-On the A3x, both the UltraBay 2000 and UltraBay Plus devices are
-supported. Use "eject2" instead of "eject" for the second bay.
-
-Note: the UltraBay eject support on the 600e/x, A22p and A3x is
-EXPERIMENTAL and may not work as expected. USE WITH CAUTION!
-
-
CMOS/UCMS control
-----------------
-/*P:100 This is the Launcher code, a simple program which lays out the
- * "physical" memory for the new Guest by mapping the kernel image and
- * the virtual devices, then opens /dev/lguest to tell the kernel
- * about the Guest and control it. :*/
+/*P:100
+ * This is the Launcher code, a simple program which lays out the "physical"
+ * memory for the new Guest by mapping the kernel image and the virtual
+ * devices, then opens /dev/lguest to tell the kernel about the Guest and
+ * control it.
+:*/
#define _LARGEFILE64_SOURCE
#define _GNU_SOURCE
#include <stdio.h>
#include "linux/virtio_rng.h"
#include "linux/virtio_ring.h"
#include "asm/bootparam.h"
-/*L:110 We can ignore the 39 include files we need for this program, but I do
- * want to draw attention to the use of kernel-style types.
+/*L:110
+ * We can ignore the 42 include files we need for this program, but I do want
+ * to draw attention to the use of kernel-style types.
*
* As Linus said, "C is a Spartan language, and so should your naming be." I
* like these abbreviations, so we define them here. Note that u64 is always
* unsigned long long, which works on all Linux systems: this means that we can
- * use %llu in printf for any u64. */
+ * use %llu in printf for any u64.
+ */
typedef unsigned long long u64;
typedef uint32_t u32;
typedef uint16_t u16;
/* This will occupy 3 pages: it must be a power of 2. */
#define VIRTQUEUE_NUM 256
-/*L:120 verbose is both a global flag and a macro. The C preprocessor allows
- * this, and although I wouldn't recommend it, it works quite nicely here. */
+/*L:120
+ * verbose is both a global flag and a macro. The C preprocessor allows
+ * this, and although I wouldn't recommend it, it works quite nicely here.
+ */
static bool verbose;
#define verbose(args...) \
do { if (verbose) printf(args); } while(0)
static unsigned int __thread cpu_id;
/* This is our list of devices. */
-struct device_list
-{
+struct device_list {
/* Counter to assign interrupt numbers. */
unsigned int next_irq;
/* A single linked list of devices. */
struct device *dev;
- /* And a pointer to the last device for easy append and also for
- * configuration appending. */
+ /* And a pointer to the last device for easy append. */
struct device *lastdev;
};
static struct device_list devices;
/* The device structure describes a single device. */
-struct device
-{
+struct device {
/* The linked-list pointer. */
struct device *next;
};
/* The virtqueue structure describes a queue attached to a device. */
-struct virtqueue
-{
+struct virtqueue {
struct virtqueue *next;
/* Which device owns me. */
/* The original tty settings to restore on exit. */
static struct termios orig_term;
-/* We have to be careful with barriers: our devices are all run in separate
+/*
+ * We have to be careful with barriers: our devices are all run in separate
* threads and so we need to make sure that changes visible to the Guest happen
- * in precise order. */
+ * in precise order.
+ */
#define wmb() __asm__ __volatile__("" : : : "memory")
#define mb() __asm__ __volatile__("" : : : "memory")
-/* Convert an iovec element to the given type.
+/*
+ * Convert an iovec element to the given type.
*
* This is a fairly ugly trick: we need to know the size of the type and
* alignment requirement to check the pointer is kosher. It's also nice to
* have the name of the type in case we report failure.
*
* Typing those three things all the time is cumbersome and error prone, so we
- * have a macro which sets them all up and passes to the real function. */
+ * have a macro which sets them all up and passes to the real function.
+ */
#define convert(iov, type) \
((type *)_convert((iov), sizeof(type), __alignof__(type), #type))
/* Wrapper for the last available index. Makes it easier to change. */
#define lg_last_avail(vq) ((vq)->last_avail_idx)
-/* The virtio configuration space is defined to be little-endian. x86 is
- * little-endian too, but it's nice to be explicit so we have these helpers. */
+/*
+ * The virtio configuration space is defined to be little-endian. x86 is
+ * little-endian too, but it's nice to be explicit so we have these helpers.
+ */
#define cpu_to_le16(v16) (v16)
#define cpu_to_le32(v32) (v32)
#define cpu_to_le64(v64) (v64)
+ dev->num_vq * sizeof(struct lguest_vqconfig);
}
-/*L:100 The Launcher code itself takes us out into userspace, that scary place
- * where pointers run wild and free! Unfortunately, like most userspace
- * programs, it's quite boring (which is why everyone likes to hack on the
- * kernel!). Perhaps if you make up an Lguest Drinking Game at this point, it
- * will get you through this section. Or, maybe not.
+/*L:100
+ * The Launcher code itself takes us out into userspace, that scary place where
+ * pointers run wild and free! Unfortunately, like most userspace programs,
+ * it's quite boring (which is why everyone likes to hack on the kernel!).
+ * Perhaps if you make up an Lguest Drinking Game at this point, it will get
+ * you through this section. Or, maybe not.
*
* The Launcher sets up a big chunk of memory to be the Guest's "physical"
* memory and stores it in "guest_base". In other words, Guest physical ==
*
* This can be tough to get your head around, but usually it just means that we
* use these trivial conversion functions when the Guest gives us it's
- * "physical" addresses: */
+ * "physical" addresses:
+ */
static void *from_guest_phys(unsigned long addr)
{
return guest_base + addr;
* Loading the Kernel.
*
* We start with couple of simple helper routines. open_or_die() avoids
- * error-checking code cluttering the callers: */
+ * error-checking code cluttering the callers:
+ */
static int open_or_die(const char *name, int flags)
{
int fd = open(name, flags);
int fd = open_or_die("/dev/zero", O_RDONLY);
void *addr;
- /* We use a private mapping (ie. if we write to the page, it will be
- * copied). */
+ /*
+ * We use a private mapping (ie. if we write to the page, it will be
+ * copied).
+ */
addr = mmap(NULL, getpagesize() * num,
PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE, fd, 0);
if (addr == MAP_FAILED)
err(1, "Mmaping %u pages of /dev/zero", num);
+
+ /*
+ * One neat mmap feature is that you can close the fd, and it
+ * stays mapped.
+ */
close(fd);
return addr;
return addr;
}
-/* This routine is used to load the kernel or initrd. It tries mmap, but if
+/*
+ * This routine is used to load the kernel or initrd. It tries mmap, but if
* that fails (Plan 9's kernel file isn't nicely aligned on page boundaries),
- * it falls back to reading the memory in. */
+ * it falls back to reading the memory in.
+ */
static void map_at(int fd, void *addr, unsigned long offset, unsigned long len)
{
ssize_t r;
- /* We map writable even though for some segments are marked read-only.
+ /*
+ * We map writable even though for some segments are marked read-only.
* The kernel really wants to be writable: it patches its own
* instructions.
*
* MAP_PRIVATE means that the page won't be copied until a write is
* done to it. This allows us to share untouched memory between
- * Guests. */
+ * Guests.
+ */
if (mmap(addr, len, PROT_READ|PROT_WRITE|PROT_EXEC,
MAP_FIXED|MAP_PRIVATE, fd, offset) != MAP_FAILED)
return;
err(1, "Reading offset %lu len %lu gave %zi", offset, len, r);
}
-/* This routine takes an open vmlinux image, which is in ELF, and maps it into
+/*
+ * This routine takes an open vmlinux image, which is in ELF, and maps it into
* the Guest memory. ELF = Embedded Linking Format, which is the format used
* by all modern binaries on Linux including the kernel.
*
* address. We use the physical address; the Guest will map itself to the
* virtual address.
*
- * We return the starting address. */
+ * We return the starting address.
+ */
static unsigned long map_elf(int elf_fd, const Elf32_Ehdr *ehdr)
{
Elf32_Phdr phdr[ehdr->e_phnum];
unsigned int i;
- /* Sanity checks on the main ELF header: an x86 executable with a
- * reasonable number of correctly-sized program headers. */
+ /*
+ * Sanity checks on the main ELF header: an x86 executable with a
+ * reasonable number of correctly-sized program headers.
+ */
if (ehdr->e_type != ET_EXEC
|| ehdr->e_machine != EM_386
|| ehdr->e_phentsize != sizeof(Elf32_Phdr)
|| ehdr->e_phnum < 1 || ehdr->e_phnum > 65536U/sizeof(Elf32_Phdr))
errx(1, "Malformed elf header");
- /* An ELF executable contains an ELF header and a number of "program"
+ /*
+ * An ELF executable contains an ELF header and a number of "program"
* headers which indicate which parts ("segments") of the program to
- * load where. */
+ * load where.
+ */
/* We read in all the program headers at once: */
if (lseek(elf_fd, ehdr->e_phoff, SEEK_SET) < 0)
if (read(elf_fd, phdr, sizeof(phdr)) != sizeof(phdr))
err(1, "Reading program headers");
- /* Try all the headers: there are usually only three. A read-only one,
- * a read-write one, and a "note" section which we don't load. */
+ /*
+ * Try all the headers: there are usually only three. A read-only one,
+ * a read-write one, and a "note" section which we don't load.
+ */
for (i = 0; i < ehdr->e_phnum; i++) {
/* If this isn't a loadable segment, we ignore it */
if (phdr[i].p_type != PT_LOAD)
return ehdr->e_entry;
}
-/*L:150 A bzImage, unlike an ELF file, is not meant to be loaded. You're
- * supposed to jump into it and it will unpack itself. We used to have to
- * perform some hairy magic because the unpacking code scared me.
+/*L:150
+ * A bzImage, unlike an ELF file, is not meant to be loaded. You're supposed
+ * to jump into it and it will unpack itself. We used to have to perform some
+ * hairy magic because the unpacking code scared me.
*
* Fortunately, Jeremy Fitzhardinge convinced me it wasn't that hard and wrote
* a small patch to jump over the tricky bits in the Guest, so now we just read
- * the funky header so we know where in the file to load, and away we go! */
+ * the funky header so we know where in the file to load, and away we go!
+ */
static unsigned long load_bzimage(int fd)
{
struct boot_params boot;
/* Modern bzImages get loaded at 1M. */
void *p = from_guest_phys(0x100000);
- /* Go back to the start of the file and read the header. It should be
- * a Linux boot header (see Documentation/x86/i386/boot.txt) */
+ /*
+ * Go back to the start of the file and read the header. It should be
+ * a Linux boot header (see Documentation/x86/i386/boot.txt)
+ */
lseek(fd, 0, SEEK_SET);
read(fd, &boot, sizeof(boot));
return boot.hdr.code32_start;
}
-/*L:140 Loading the kernel is easy when it's a "vmlinux", but most kernels
+/*L:140
+ * Loading the kernel is easy when it's a "vmlinux", but most kernels
* come wrapped up in the self-decompressing "bzImage" format. With a little
- * work, we can load those, too. */
+ * work, we can load those, too.
+ */
static unsigned long load_kernel(int fd)
{
Elf32_Ehdr hdr;
return load_bzimage(fd);
}
-/* This is a trivial little helper to align pages. Andi Kleen hated it because
+/*
+ * This is a trivial little helper to align pages. Andi Kleen hated it because
* it calls getpagesize() twice: "it's dumb code."
*
* Kernel guys get really het up about optimization, even when it's not
- * necessary. I leave this code as a reaction against that. */
+ * necessary. I leave this code as a reaction against that.
+ */
static inline unsigned long page_align(unsigned long addr)
{
/* Add upwards and truncate downwards. */
return ((addr + getpagesize()-1) & ~(getpagesize()-1));
}
-/*L:180 An "initial ram disk" is a disk image loaded into memory along with
- * the kernel which the kernel can use to boot from without needing any
- * drivers. Most distributions now use this as standard: the initrd contains
- * the code to load the appropriate driver modules for the current machine.
+/*L:180
+ * An "initial ram disk" is a disk image loaded into memory along with the
+ * kernel which the kernel can use to boot from without needing any drivers.
+ * Most distributions now use this as standard: the initrd contains the code to
+ * load the appropriate driver modules for the current machine.
*
* Importantly, James Morris works for RedHat, and Fedora uses initrds for its
- * kernels. He sent me this (and tells me when I break it). */
+ * kernels. He sent me this (and tells me when I break it).
+ */
static unsigned long load_initrd(const char *name, unsigned long mem)
{
int ifd;
if (fstat(ifd, &st) < 0)
err(1, "fstat() on initrd '%s'", name);
- /* We map the initrd at the top of memory, but mmap wants it to be
- * page-aligned, so we round the size up for that. */
+ /*
+ * We map the initrd at the top of memory, but mmap wants it to be
+ * page-aligned, so we round the size up for that.
+ */
len = page_align(st.st_size);
map_at(ifd, from_guest_phys(mem - len), 0, st.st_size);
- /* Once a file is mapped, you can close the file descriptor. It's a
- * little odd, but quite useful. */
+ /*
+ * Once a file is mapped, you can close the file descriptor. It's a
+ * little odd, but quite useful.
+ */
close(ifd);
verbose("mapped initrd %s size=%lu @ %p\n", name, len, (void*)mem-len);
}
/*:*/
-/* Simple routine to roll all the commandline arguments together with spaces
- * between them. */
+/*
+ * Simple routine to roll all the commandline arguments together with spaces
+ * between them.
+ */
static void concat(char *dst, char *args[])
{
unsigned int i, len = 0;
dst[len] = '\0';
}
-/*L:185 This is where we actually tell the kernel to initialize the Guest. We
+/*L:185
+ * This is where we actually tell the kernel to initialize the Guest. We
* saw the arguments it expects when we looked at initialize() in lguest_user.c:
* the base of Guest "physical" memory, the top physical page to allow and the
- * entry point for the Guest. */
+ * entry point for the Guest.
+ */
static void tell_kernel(unsigned long start)
{
unsigned long args[] = { LHREQ_INITIALIZE,
}
/*:*/
-/*
+/*L:200
* Device Handling.
*
* When the Guest gives us a buffer, it sends an array of addresses and sizes.
static void *_check_pointer(unsigned long addr, unsigned int size,
unsigned int line)
{
- /* We have to separately check addr and addr+size, because size could
- * be huge and addr + size might wrap around. */
+ /*
+ * We have to separately check addr and addr+size, because size could
+ * be huge and addr + size might wrap around.
+ */
if (addr >= guest_limit || addr + size >= guest_limit)
errx(1, "%s:%i: Invalid address %#lx", __FILE__, line, addr);
- /* We return a pointer for the caller's convenience, now we know it's
- * safe to use. */
+ /*
+ * We return a pointer for the caller's convenience, now we know it's
+ * safe to use.
+ */
return from_guest_phys(addr);
}
/* A macro which transparently hands the line number to the real function. */
#define check_pointer(addr,size) _check_pointer(addr, size, __LINE__)
-/* Each buffer in the virtqueues is actually a chain of descriptors. This
+/*
+ * Each buffer in the virtqueues is actually a chain of descriptors. This
* function returns the next descriptor in the chain, or vq->vring.num if we're
- * at the end. */
+ * at the end.
+ */
static unsigned next_desc(struct vring_desc *desc,
unsigned int i, unsigned int max)
{
return next;
}
-/* This actually sends the interrupt for this virtqueue */
+/*
+ * This actually sends the interrupt for this virtqueue, if we've used a
+ * buffer.
+ */
static void trigger_irq(struct virtqueue *vq)
{
unsigned long buf[] = { LHREQ_IRQ, vq->config.irq };
err(1, "Triggering irq %i", vq->config.irq);
}
-/* This looks in the virtqueue and for the first available buffer, and converts
+/*
+ * This looks in the virtqueue for the first available buffer, and converts
* it to an iovec for convenient access. Since descriptors consist of some
* number of output then some number of input descriptors, it's actually two
* iovecs, but we pack them into one and note how many of each there were.
*
- * This function returns the descriptor number found. */
+ * This function waits if necessary, and returns the descriptor number found.
+ */
static unsigned wait_for_vq_desc(struct virtqueue *vq,
struct iovec iov[],
unsigned int *out_num, unsigned int *in_num)
struct vring_desc *desc;
u16 last_avail = lg_last_avail(vq);
+ /* There's nothing available? */
while (last_avail == vq->vring.avail->idx) {
u64 event;
- /* OK, tell Guest about progress up to now. */
+ /*
+ * Since we're about to sleep, now is a good time to tell the
+ * Guest about what we've used up to now.
+ */
trigger_irq(vq);
/* OK, now we need to know about added descriptors. */
vq->vring.used->flags &= ~VRING_USED_F_NO_NOTIFY;
- /* They could have slipped one in as we were doing that: make
- * sure it's written, then check again. */
+ /*
+ * They could have slipped one in as we were doing that: make
+ * sure it's written, then check again.
+ */
mb();
if (last_avail != vq->vring.avail->idx) {
vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY;
errx(1, "Guest moved used index from %u to %u",
last_avail, vq->vring.avail->idx);
- /* Grab the next descriptor number they're advertising, and increment
- * the index we've seen. */
+ /*
+ * Grab the next descriptor number they're advertising, and increment
+ * the index we've seen.
+ */
head = vq->vring.avail->ring[last_avail % vq->vring.num];
lg_last_avail(vq)++;
desc = vq->vring.desc;
i = head;
- /* If this is an indirect entry, then this buffer contains a descriptor
- * table which we handle as if it's any normal descriptor chain. */
+ /*
+ * If this is an indirect entry, then this buffer contains a descriptor
+ * table which we handle as if it's any normal descriptor chain.
+ */
if (desc[i].flags & VRING_DESC_F_INDIRECT) {
if (desc[i].len % sizeof(struct vring_desc))
errx(1, "Invalid size for indirect buffer table");
if (desc[i].flags & VRING_DESC_F_WRITE)
(*in_num)++;
else {
- /* If it's an output descriptor, they're all supposed
- * to come before any input descriptors. */
+ /*
+ * If it's an output descriptor, they're all supposed
+ * to come before any input descriptors.
+ */
if (*in_num)
errx(1, "Descriptor has out after in");
(*out_num)++;
return head;
}
-/* After we've used one of their buffers, we tell them about it. We'll then
- * want to send them an interrupt, using trigger_irq(). */
+/*
+ * After we've used one of their buffers, we tell the Guest about it. Sometime
+ * later we'll want to send them an interrupt using trigger_irq(); note that
+ * wait_for_vq_desc() does that for us if it has to wait.
+ */
static void add_used(struct virtqueue *vq, unsigned int head, int len)
{
struct vring_used_elem *used;
- /* The virtqueue contains a ring of used buffers. Get a pointer to the
- * next entry in that used ring. */
+ /*
+ * The virtqueue contains a ring of used buffers. Get a pointer to the
+ * next entry in that used ring.
+ */
used = &vq->vring.used->ring[vq->vring.used->idx % vq->vring.num];
used->id = head;
used->len = len;
/*
* The Console
*
- * We associate some data with the console for our exit hack. */
-struct console_abort
-{
+ * We associate some data with the console for our exit hack.
+ */
+struct console_abort {
/* How many times have they hit ^C? */
int count;
/* When did they start? */
struct console_abort *abort = vq->dev->priv;
struct iovec iov[vq->vring.num];
- /* Make sure there's a descriptor waiting. */
+ /* Make sure there's a descriptor available. */
head = wait_for_vq_desc(vq, iov, &out_num, &in_num);
if (out_num)
errx(1, "Output buffers in console in queue?");
- /* Read it in. */
+ /* Read into it. This is where we usually wait. */
len = readv(STDIN_FILENO, iov, in_num);
if (len <= 0) {
/* Ran out of input? */
warnx("Failed to get console input, ignoring console.");
- /* For simplicity, dying threads kill the whole Launcher. So
- * just nap here. */
+ /*
+ * For simplicity, dying threads kill the whole Launcher. So
+ * just nap here.
+ */
for (;;)
pause();
}
+ /* Tell the Guest we used a buffer. */
add_used_and_trigger(vq, head, len);
- /* Three ^C within one second? Exit.
+ /*
+ * Three ^C within one second? Exit.
*
* This is such a hack, but works surprisingly well. Each ^C has to
* be in a buffer by itself, so they can't be too fast. But we check
* that we get three within about a second, so they can't be too
- * slow. */
+ * slow.
+ */
if (len != 1 || ((char *)iov[0].iov_base)[0] != 3) {
abort->count = 0;
return;
unsigned int head, out, in;
struct iovec iov[vq->vring.num];
+ /* We usually wait in here, for the Guest to give us something. */
head = wait_for_vq_desc(vq, iov, &out, &in);
if (in)
errx(1, "Input buffers in console output queue?");
+
+ /* writev can return a partial write, so we loop here. */
while (!iov_empty(iov, out)) {
int len = writev(STDOUT_FILENO, iov, out);
if (len <= 0)
err(1, "Write to stdout gave %i", len);
iov_consume(iov, out, len);
}
+
+ /*
+ * We're finished with that buffer: if we're going to sleep,
+ * wait_for_vq_desc() will prod the Guest with an interrupt.
+ */
add_used(vq, head, 0);
}
unsigned int head, out, in;
struct iovec iov[vq->vring.num];
+ /* We usually wait in here for the Guest to give us a packet. */
head = wait_for_vq_desc(vq, iov, &out, &in);
if (in)
errx(1, "Input buffers in net output queue?");
+ /*
+ * Send the whole thing through to /dev/net/tun. It expects the exact
+ * same format: what a coincidence!
+ */
if (writev(net_info->tunfd, iov, out) < 0)
errx(1, "Write to tun failed?");
+
+ /*
+ * Done with that one; wait_for_vq_desc() will send the interrupt if
+ * all packets are processed.
+ */
add_used(vq, head, 0);
}
-/* Will reading from this file descriptor block? */
+/*
+ * Handling network input is a bit trickier, because I've tried to optimize it.
+ *
+ * First we have a helper routine which tells is if from this file descriptor
+ * (ie. the /dev/net/tun device) will block:
+ */
static bool will_block(int fd)
{
fd_set fdset;
return select(fd+1, &fdset, NULL, NULL, &zero) != 1;
}
-/* This is where we handle packets coming in from the tun device to our
- * Guest. */
+/*
+ * This handles packets coming in from the tun device to our Guest. Like all
+ * service routines, it gets called again as soon as it returns, so you don't
+ * see a while(1) loop here.
+ */
static void net_input(struct virtqueue *vq)
{
int len;
struct iovec iov[vq->vring.num];
struct net_info *net_info = vq->dev->priv;
+ /*
+ * Get a descriptor to write an incoming packet into. This will also
+ * send an interrupt if they're out of descriptors.
+ */
head = wait_for_vq_desc(vq, iov, &out, &in);
if (out)
errx(1, "Output buffers in net input queue?");
- /* Deliver interrupt now, since we're about to sleep. */
+ /*
+ * If it looks like we'll block reading from the tun device, send them
+ * an interrupt.
+ */
if (vq->pending_used && will_block(net_info->tunfd))
trigger_irq(vq);
+ /*
+ * Read in the packet. This is where we normally wait (when there's no
+ * incoming network traffic).
+ */
len = readv(net_info->tunfd, iov, in);
if (len <= 0)
err(1, "Failed to read from tun.");
+
+ /*
+ * Mark that packet buffer as used, but don't interrupt here. We want
+ * to wait until we've done as much work as we can.
+ */
add_used(vq, head, len);
}
+/*:*/
-/* This is the helper to create threads. */
+/* This is the helper to create threads: run the service routine in a loop. */
static int do_thread(void *_vq)
{
struct virtqueue *vq = _vq;
return 0;
}
-/* When a child dies, we kill our entire process group with SIGTERM. This
- * also has the side effect that the shell restores the console for us! */
+/*
+ * When a child dies, we kill our entire process group with SIGTERM. This
+ * also has the side effect that the shell restores the console for us!
+ */
static void kill_launcher(int signal)
{
kill(0, SIGTERM);
signal(SIGCHLD, (void *)kill_launcher);
}
+/*L:216
+ * This actually creates the thread which services the virtqueue for a device.
+ */
static void create_thread(struct virtqueue *vq)
{
- /* Create stack for thread and run it. Since stack grows
- * upwards, we point the stack pointer to the end of this
- * region. */
+ /*
+ * Create stack for thread. Since the stack grows upwards, we point
+ * the stack pointer to the end of this region.
+ */
char *stack = malloc(32768);
unsigned long args[] = { LHREQ_EVENTFD,
vq->config.pfn*getpagesize(), 0 };
err(1, "Creating eventfd");
args[2] = vq->eventfd;
- /* Attach an eventfd to this virtqueue: it will go off
- * when the Guest does an LHCALL_NOTIFY for this vq. */
+ /*
+ * Attach an eventfd to this virtqueue: it will go off when the Guest
+ * does an LHCALL_NOTIFY for this vq.
+ */
if (write(lguest_fd, &args, sizeof(args)) != 0)
err(1, "Attaching eventfd");
- /* CLONE_VM: because it has to access the Guest memory, and
- * SIGCHLD so we get a signal if it dies. */
+ /*
+ * CLONE_VM: because it has to access the Guest memory, and SIGCHLD so
+ * we get a signal if it dies.
+ */
vq->thread = clone(do_thread, stack + 32768, CLONE_VM | SIGCHLD, vq);
if (vq->thread == (pid_t)-1)
err(1, "Creating clone");
- /* We close our local copy, now the child has it. */
+
+ /* We close our local copy now the child has it. */
close(vq->eventfd);
}
}
}
-/* This is the generic routine we call when the Guest uses LHCALL_NOTIFY. */
+/*L:215
+ * This is the generic routine we call when the Guest uses LHCALL_NOTIFY. In
+ * particular, it's used to notify us of device status changes during boot.
+ */
static void handle_output(unsigned long addr)
{
struct device *i;
for (i = devices.dev; i; i = i->next) {
struct virtqueue *vq;
- /* Notifications to device descriptors update device status. */
+ /*
+ * Notifications to device descriptors mean they updated the
+ * device status.
+ */
if (from_guest_phys(addr) == i->desc) {
update_device_status(i);
return;
}
- /* Devices *can* be used before status is set to DRIVER_OK. */
+ /*
+ * Devices *can* be used before status is set to DRIVER_OK.
+ * The original plan was that they would never do this: they
+ * would always finish setting up their status bits before
+ * actually touching the virtqueues. In practice, we allowed
+ * them to, and they do (eg. the disk probes for partition
+ * tables as part of initialization).
+ *
+ * If we see this, we start the device: once it's running, we
+ * expect the device to catch all the notifications.
+ */
for (vq = i->vq; vq; vq = vq->next) {
if (addr != vq->config.pfn*getpagesize())
continue;
if (i->running)
errx(1, "Notification on running %s", i->name);
+ /* This just calls create_thread() for each virtqueue */
start_device(i);
return;
}
}
- /* Early console write is done using notify on a nul-terminated string
- * in Guest memory. */
+ /*
+ * Early console write is done using notify on a nul-terminated string
+ * in Guest memory. It's also great for hacking debugging messages
+ * into a Guest.
+ */
if (addr >= guest_limit)
errx(1, "Bad NOTIFY %#lx", addr);
* routines to allocate and manage them.
*/
-/* The layout of the device page is a "struct lguest_device_desc" followed by a
+/*
+ * The layout of the device page is a "struct lguest_device_desc" followed by a
* number of virtqueue descriptors, then two sets of feature bits, then an
* array of configuration bytes. This routine returns the configuration
- * pointer. */
+ * pointer.
+ */
static u8 *device_config(const struct device *dev)
{
return (void *)(dev->desc + 1)
+ dev->feature_len * 2;
}
-/* This routine allocates a new "struct lguest_device_desc" from descriptor
+/*
+ * This routine allocates a new "struct lguest_device_desc" from descriptor
* table page just above the Guest's normal memory. It returns a pointer to
- * that descriptor. */
+ * that descriptor.
+ */
static struct lguest_device_desc *new_dev_desc(u16 type)
{
struct lguest_device_desc d = { .type = type };
return memcpy(p, &d, sizeof(d));
}
-/* Each device descriptor is followed by the description of its virtqueues. We
- * specify how many descriptors the virtqueue is to have. */
+/*
+ * Each device descriptor is followed by the description of its virtqueues. We
+ * specify how many descriptors the virtqueue is to have.
+ */
static void add_virtqueue(struct device *dev, unsigned int num_descs,
void (*service)(struct virtqueue *))
{
vq->next = NULL;
vq->last_avail_idx = 0;
vq->dev = dev;
+
+ /*
+ * This is the routine the service thread will run, and its Process ID
+ * once it's running.
+ */
vq->service = service;
vq->thread = (pid_t)-1;
/* Initialize the vring. */
vring_init(&vq->vring, num_descs, p, LGUEST_VRING_ALIGN);
- /* Append virtqueue to this device's descriptor. We use
+ /*
+ * Append virtqueue to this device's descriptor. We use
* device_config() to get the end of the device's current virtqueues;
* we check that we haven't added any config or feature information
- * yet, otherwise we'd be overwriting them. */
+ * yet, otherwise we'd be overwriting them.
+ */
assert(dev->desc->config_len == 0 && dev->desc->feature_len == 0);
memcpy(device_config(dev), &vq->config, sizeof(vq->config));
dev->num_vq++;
verbose("Virtqueue page %#lx\n", to_guest_phys(p));
- /* Add to tail of list, so dev->vq is first vq, dev->vq->next is
- * second. */
+ /*
+ * Add to tail of list, so dev->vq is first vq, dev->vq->next is
+ * second.
+ */
for (i = &dev->vq; *i; i = &(*i)->next);
*i = vq;
}
-/* The first half of the feature bitmask is for us to advertise features. The
- * second half is for the Guest to accept features. */
+/*
+ * The first half of the feature bitmask is for us to advertise features. The
+ * second half is for the Guest to accept features.
+ */
static void add_feature(struct device *dev, unsigned bit)
{
u8 *features = get_feature_bits(dev);
features[bit / CHAR_BIT] |= (1 << (bit % CHAR_BIT));
}
-/* This routine sets the configuration fields for an existing device's
+/*
+ * This routine sets the configuration fields for an existing device's
* descriptor. It only works for the last device, but that's OK because that's
- * how we use it. */
+ * how we use it.
+ */
static void set_config(struct device *dev, unsigned len, const void *conf)
{
/* Check we haven't overflowed our single page. */
/* Copy in the config information, and store the length. */
memcpy(device_config(dev), conf, len);
dev->desc->config_len = len;
+
+ /* Size must fit in config_len field (8 bits)! */
+ assert(dev->desc->config_len == len);
}
-/* This routine does all the creation and setup of a new device, including
- * calling new_dev_desc() to allocate the descriptor and device memory.
+/*
+ * This routine does all the creation and setup of a new device, including
+ * calling new_dev_desc() to allocate the descriptor and device memory. We
+ * don't actually start the service threads until later.
*
- * See what I mean about userspace being boring? */
+ * See what I mean about userspace being boring?
+ */
static struct device *new_device(const char *name, u16 type)
{
struct device *dev = malloc(sizeof(*dev));
dev->num_vq = 0;
dev->running = false;
- /* Append to device list. Prepending to a single-linked list is
+ /*
+ * Append to device list. Prepending to a single-linked list is
* easier, but the user expects the devices to be arranged on the bus
* in command-line order. The first network device on the command line
- * is eth0, the first block device /dev/vda, etc. */
+ * is eth0, the first block device /dev/vda, etc.
+ */
if (devices.lastdev)
devices.lastdev->next = dev;
else
return dev;
}
-/* Our first setup routine is the console. It's a fairly simple device, but
- * UNIX tty handling makes it uglier than it could be. */
+/*
+ * Our first setup routine is the console. It's a fairly simple device, but
+ * UNIX tty handling makes it uglier than it could be.
+ */
static void setup_console(void)
{
struct device *dev;
/* If we can save the initial standard input settings... */
if (tcgetattr(STDIN_FILENO, &orig_term) == 0) {
struct termios term = orig_term;
- /* Then we turn off echo, line buffering and ^C etc. We want a
- * raw input stream to the Guest. */
+ /*
+ * Then we turn off echo, line buffering and ^C etc: We want a
+ * raw input stream to the Guest.
+ */
term.c_lflag &= ~(ISIG|ICANON|ECHO);
tcsetattr(STDIN_FILENO, TCSANOW, &term);
}
dev->priv = malloc(sizeof(struct console_abort));
((struct console_abort *)dev->priv)->count = 0;
- /* The console needs two virtqueues: the input then the output. When
+ /*
+ * The console needs two virtqueues: the input then the output. When
* they put something the input queue, we make sure we're listening to
* stdin. When they put something in the output queue, we write it to
- * stdout. */
+ * stdout.
+ */
add_virtqueue(dev, VIRTQUEUE_NUM, console_input);
add_virtqueue(dev, VIRTQUEUE_NUM, console_output);
}
/*:*/
-/*M:010 Inter-guest networking is an interesting area. Simplest is to have a
+/*M:010
+ * Inter-guest networking is an interesting area. Simplest is to have a
* --sharenet=<name> option which opens or creates a named pipe. This can be
* used to send packets to another guest in a 1:1 manner.
*
* multiple inter-guest channels behind one interface, although it would
* require some manner of hotplugging new virtio channels.
*
- * Finally, we could implement a virtio network switch in the kernel. :*/
+ * Finally, we could implement a virtio network switch in the kernel.
+:*/
static u32 str2ip(const char *ipaddr)
{
mac[5] = m[5];
}
-/* This code is "adapted" from libbridge: it attaches the Host end of the
+/*
+ * This code is "adapted" from libbridge: it attaches the Host end of the
* network device to the bridge device specified by the command line.
*
* This is yet another James Morris contribution (I'm an IP-level guy, so I
- * dislike bridging), and I just try not to break it. */
+ * dislike bridging), and I just try not to break it.
+ */
static void add_to_bridge(int fd, const char *if_name, const char *br_name)
{
int ifidx;
err(1, "can't add %s to bridge %s", if_name, br_name);
}
-/* This sets up the Host end of the network device with an IP address, brings
+/*
+ * This sets up the Host end of the network device with an IP address, brings
* it up so packets will flow, the copies the MAC address into the hwaddr
- * pointer. */
+ * pointer.
+ */
static void configure_device(int fd, const char *tapif, u32 ipaddr)
{
struct ifreq ifr;
/* Start with this zeroed. Messy but sure. */
memset(&ifr, 0, sizeof(ifr));
- /* We open the /dev/net/tun device and tell it we want a tap device. A
+ /*
+ * We open the /dev/net/tun device and tell it we want a tap device. A
* tap device is like a tun device, only somehow different. To tell
* the truth, I completely blundered my way through this code, but it
- * works now! */
+ * works now!
+ */
netfd = open_or_die("/dev/net/tun", O_RDWR);
ifr.ifr_flags = IFF_TAP | IFF_NO_PI | IFF_VNET_HDR;
strcpy(ifr.ifr_name, "tap%d");
TUN_F_CSUM|TUN_F_TSO4|TUN_F_TSO6|TUN_F_TSO_ECN) != 0)
err(1, "Could not set features for tun device");
- /* We don't need checksums calculated for packets coming in this
- * device: trust us! */
+ /*
+ * We don't need checksums calculated for packets coming in this
+ * device: trust us!
+ */
ioctl(netfd, TUNSETNOCSUM, 1);
memcpy(tapif, ifr.ifr_name, IFNAMSIZ);
return netfd;
}
-/*L:195 Our network is a Host<->Guest network. This can either use bridging or
+/*L:195
+ * Our network is a Host<->Guest network. This can either use bridging or
* routing, but the principle is the same: it uses the "tun" device to inject
* packets into the Host as if they came in from a normal network card. We
- * just shunt packets between the Guest and the tun device. */
+ * just shunt packets between the Guest and the tun device.
+ */
static void setup_tun_net(char *arg)
{
struct device *dev;
dev = new_device("net", VIRTIO_ID_NET);
dev->priv = net_info;
- /* Network devices need a receive and a send queue, just like
- * console. */
+ /* Network devices need a recv and a send queue, just like console. */
add_virtqueue(dev, VIRTQUEUE_NUM, net_input);
add_virtqueue(dev, VIRTQUEUE_NUM, net_output);
- /* We need a socket to perform the magic network ioctls to bring up the
- * tap interface, connect to the bridge etc. Any socket will do! */
+ /*
+ * We need a socket to perform the magic network ioctls to bring up the
+ * tap interface, connect to the bridge etc. Any socket will do!
+ */
ipfd = socket(PF_INET, SOCK_DGRAM, IPPROTO_IP);
if (ipfd < 0)
err(1, "opening IP socket");
verbose("device %u: tun %s: %s\n",
devices.device_num, tapif, arg);
}
-
-/* Our block (disk) device should be really simple: the Guest asks for a block
- * number and we read or write that position in the file. Unfortunately, that
- * was amazingly slow: the Guest waits until the read is finished before
- * running anything else, even if it could have been doing useful work.
- *
- * We could use async I/O, except it's reputed to suck so hard that characters
- * actually go missing from your code when you try to use it.
- *
- * So we farm the I/O out to thread, and communicate with it via a pipe. */
+/*:*/
/* This hangs off device->priv. */
-struct vblk_info
-{
+struct vblk_info {
/* The size of the file. */
off64_t len;
/* The file descriptor for the file. */
int fd;
- /* IO thread listens on this file descriptor [0]. */
- int workpipe[2];
-
- /* IO thread writes to this file descriptor to mark it done, then
- * Launcher triggers interrupt to Guest. */
- int done_fd;
};
/*L:210
* The Disk
*
- * Remember that the block device is handled by a separate I/O thread. We head
- * straight into the core of that thread here:
+ * The disk only has one virtqueue, so it only has one thread. It is really
+ * simple: the Guest asks for a block number and we read or write that position
+ * in the file.
+ *
+ * Before we serviced each virtqueue in a separate thread, that was unacceptably
+ * slow: the Guest waits until the read is finished before running anything
+ * else, even if it could have been doing useful work.
+ *
+ * We could have used async I/O, except it's reputed to suck so hard that
+ * characters actually go missing from your code when you try to use it.
*/
static void blk_request(struct virtqueue *vq)
{
struct iovec iov[vq->vring.num];
off64_t off;
- /* Get the next request. */
+ /*
+ * Get the next request, where we normally wait. It triggers the
+ * interrupt to acknowledge previously serviced requests (if any).
+ */
head = wait_for_vq_desc(vq, iov, &out_num, &in_num);
- /* Every block request should contain at least one output buffer
+ /*
+ * Every block request should contain at least one output buffer
* (detailing the location on disk and the type of request) and one
- * input buffer (to hold the result). */
+ * input buffer (to hold the result).
+ */
if (out_num == 0 || in_num == 0)
errx(1, "Bad virtblk cmd %u out=%u in=%u",
head, out_num, in_num);
out = convert(&iov[0], struct virtio_blk_outhdr);
in = convert(&iov[out_num+in_num-1], u8);
+ /*
+ * For historical reasons, block operations are expressed in 512 byte
+ * "sectors".
+ */
off = out->sector * 512;
- /* The block device implements "barriers", where the Guest indicates
+ /*
+ * The block device implements "barriers", where the Guest indicates
* that it wants all previous writes to occur before this write. We
* don't have a way of asking our kernel to do a barrier, so we just
- * synchronize all the data in the file. Pretty poor, no? */
+ * synchronize all the data in the file. Pretty poor, no?
+ */
if (out->type & VIRTIO_BLK_T_BARRIER)
fdatasync(vblk->fd);
- /* In general the virtio block driver is allowed to try SCSI commands.
- * It'd be nice if we supported eject, for example, but we don't. */
+ /*
+ * In general the virtio block driver is allowed to try SCSI commands.
+ * It'd be nice if we supported eject, for example, but we don't.
+ */
if (out->type & VIRTIO_BLK_T_SCSI_CMD) {
fprintf(stderr, "Scsi commands unsupported\n");
*in = VIRTIO_BLK_S_UNSUPP;
wlen = sizeof(*in);
} else if (out->type & VIRTIO_BLK_T_OUT) {
- /* Write */
-
- /* Move to the right location in the block file. This can fail
- * if they try to write past end. */
+ /*
+ * Write
+ *
+ * Move to the right location in the block file. This can fail
+ * if they try to write past end.
+ */
if (lseek64(vblk->fd, off, SEEK_SET) != off)
err(1, "Bad seek to sector %llu", out->sector);
ret = writev(vblk->fd, iov+1, out_num-1);
verbose("WRITE to sector %llu: %i\n", out->sector, ret);
- /* Grr... Now we know how long the descriptor they sent was, we
+ /*
+ * Grr... Now we know how long the descriptor they sent was, we
* make sure they didn't try to write over the end of the block
- * file (possibly extending it). */
+ * file (possibly extending it).
+ */
if (ret > 0 && off + ret > vblk->len) {
/* Trim it back to the correct length */
ftruncate64(vblk->fd, vblk->len);
wlen = sizeof(*in);
*in = (ret >= 0 ? VIRTIO_BLK_S_OK : VIRTIO_BLK_S_IOERR);
} else {
- /* Read */
-
- /* Move to the right location in the block file. This can fail
- * if they try to read past end. */
+ /*
+ * Read
+ *
+ * Move to the right location in the block file. This can fail
+ * if they try to read past end.
+ */
if (lseek64(vblk->fd, off, SEEK_SET) != off)
err(1, "Bad seek to sector %llu", out->sector);
}
}
- /* OK, so we noted that it was pretty poor to use an fdatasync as a
+ /*
+ * OK, so we noted that it was pretty poor to use an fdatasync as a
* barrier. But Christoph Hellwig points out that we need a sync
* *afterwards* as well: "Barriers specify no reordering to the front
- * or the back." And Jens Axboe confirmed it, so here we are: */
+ * or the back." And Jens Axboe confirmed it, so here we are:
+ */
if (out->type & VIRTIO_BLK_T_BARRIER)
fdatasync(vblk->fd);
+ /* Finished that request. */
add_used(vq, head, wlen);
}
struct vblk_info *vblk;
struct virtio_blk_config conf;
- /* The device responds to return from I/O thread. */
+ /* Creat the device. */
dev = new_device("block", VIRTIO_ID_BLOCK);
/* The device has one virtqueue, where the Guest places requests. */
/* Tell Guest how many sectors this device has. */
conf.capacity = cpu_to_le64(vblk->len / 512);
- /* Tell Guest not to put in too many descriptors at once: two are used
- * for the in and out elements. */
+ /*
+ * Tell Guest not to put in too many descriptors at once: two are used
+ * for the in and out elements.
+ */
add_feature(dev, VIRTIO_BLK_F_SEG_MAX);
conf.seg_max = cpu_to_le32(VIRTQUEUE_NUM - 2);
- set_config(dev, sizeof(conf), &conf);
+ /* Don't try to put whole struct: we have 8 bit limit. */
+ set_config(dev, offsetof(struct virtio_blk_config, geometry), &conf);
verbose("device %u: virtblock %llu sectors\n",
++devices.device_num, le64_to_cpu(conf.capacity));
}
-struct rng_info {
- int rfd;
-};
-
-/* Our random number generator device reads from /dev/random into the Guest's
+/*L:211
+ * Our random number generator device reads from /dev/random into the Guest's
* input buffers. The usual case is that the Guest doesn't want random numbers
* and so has no buffers although /dev/random is still readable, whereas
* console is the reverse.
*
- * The same logic applies, however. */
+ * The same logic applies, however.
+ */
+struct rng_info {
+ int rfd;
+};
+
static void rng_input(struct virtqueue *vq)
{
int len;
if (out_num)
errx(1, "Output buffers in rng?");
- /* This is why we convert to iovecs: the readv() call uses them, and so
- * it reads straight into the Guest's buffer. We loop to make sure we
- * fill it. */
+ /*
+ * Just like the console write, we loop to cover the whole iovec.
+ * In this case, short reads actually happen quite a bit.
+ */
while (!iov_empty(iov, in_num)) {
len = readv(rng_info->rfd, iov, in_num);
if (len <= 0)
add_used(vq, head, totlen);
}
-/* And this creates a "hardware" random number device for the Guest. */
+/*L:199
+ * This creates a "hardware" random number device for the Guest.
+ */
static void setup_rng(void)
{
struct device *dev;
struct rng_info *rng_info = malloc(sizeof(*rng_info));
+ /* Our device's privat info simply contains the /dev/random fd. */
rng_info->rfd = open_or_die("/dev/random", O_RDONLY);
- /* The device responds to return from I/O thread. */
+ /* Create the new device. */
dev = new_device("rng", VIRTIO_ID_RNG);
dev->priv = rng_info;
{
unsigned int i;
- /* Since we don't track all open fds, we simply close everything beyond
- * stderr. */
+ /*
+ * Since we don't track all open fds, we simply close everything beyond
+ * stderr.
+ */
for (i = 3; i < FD_SETSIZE; i++)
close(i);
err(1, "Could not exec %s", main_args[0]);
}
-/*L:220 Finally we reach the core of the Launcher which runs the Guest, serves
- * its input and output, and finally, lays it to rest. */
+/*L:220
+ * Finally we reach the core of the Launcher which runs the Guest, serves
+ * its input and output, and finally, lays it to rest.
+ */
static void __attribute__((noreturn)) run_guest(void)
{
for (;;) {
*
* Are you ready? Take a deep breath and join me in the core of the Host, in
* "make Host".
- :*/
+:*/
static struct option opts[] = {
{ "verbose", 0, NULL, 'v' },
/*L:105 The main routine is where the real work begins: */
int main(int argc, char *argv[])
{
- /* Memory, top-level pagetable, code startpoint and size of the
- * (optional) initrd. */
+ /* Memory, code startpoint and size of the (optional) initrd. */
unsigned long mem = 0, start, initrd_size = 0;
/* Two temporaries. */
int i, c;
/* Save the args: we "reboot" by execing ourselves again. */
main_args = argv;
- /* First we initialize the device list. We keep a pointer to the last
+ /*
+ * First we initialize the device list. We keep a pointer to the last
* device, and the next interrupt number to use for devices (1:
- * remember that 0 is used by the timer). */
+ * remember that 0 is used by the timer).
+ */
devices.lastdev = NULL;
devices.next_irq = 1;
+ /* We're CPU 0. In fact, that's the only CPU possible right now. */
cpu_id = 0;
- /* We need to know how much memory so we can set up the device
+
+ /*
+ * We need to know how much memory so we can set up the device
* descriptor and memory pages for the devices as we parse the command
* line. So we quickly look through the arguments to find the amount
- * of memory now. */
+ * of memory now.
+ */
for (i = 1; i < argc; i++) {
if (argv[i][0] != '-') {
mem = atoi(argv[i]) * 1024 * 1024;
- /* We start by mapping anonymous pages over all of
+ /*
+ * We start by mapping anonymous pages over all of
* guest-physical memory range. This fills it with 0,
* and ensures that the Guest won't be killed when it
- * tries to access it. */
+ * tries to access it.
+ */
guest_base = map_zeroed_pages(mem / getpagesize()
+ DEVICE_PAGES);
guest_limit = mem;
usage();
}
}
- /* After the other arguments we expect memory and kernel image name,
- * followed by command line arguments for the kernel. */
+ /*
+ * After the other arguments we expect memory and kernel image name,
+ * followed by command line arguments for the kernel.
+ */
if (optind + 2 > argc)
usage();
/* Map the initrd image if requested (at top of physical memory) */
if (initrd_name) {
initrd_size = load_initrd(initrd_name, mem);
- /* These are the location in the Linux boot header where the
- * start and size of the initrd are expected to be found. */
+ /*
+ * These are the location in the Linux boot header where the
+ * start and size of the initrd are expected to be found.
+ */
boot->hdr.ramdisk_image = mem - initrd_size;
boot->hdr.ramdisk_size = initrd_size;
/* The bootloader type 0xFF means "unknown"; that's OK. */
boot->hdr.type_of_loader = 0xFF;
}
- /* The Linux boot header contains an "E820" memory map: ours is a
- * simple, single region. */
+ /*
+ * The Linux boot header contains an "E820" memory map: ours is a
+ * simple, single region.
+ */
boot->e820_entries = 1;
boot->e820_map[0] = ((struct e820entry) { 0, mem, E820_RAM });
- /* The boot header contains a command line pointer: we put the command
- * line after the boot header. */
+ /*
+ * The boot header contains a command line pointer: we put the command
+ * line after the boot header.
+ */
boot->hdr.cmd_line_ptr = to_guest_phys(boot + 1);
/* We use a simple helper to copy the arguments separated by spaces. */
concat((char *)(boot + 1), argv+optind+2);
/* Tell the entry path not to try to reload segment registers. */
boot->hdr.loadflags |= KEEP_SEGMENTS;
- /* We tell the kernel to initialize the Guest: this returns the open
- * /dev/lguest file descriptor. */
+ /*
+ * We tell the kernel to initialize the Guest: this returns the open
+ * /dev/lguest file descriptor.
+ */
tell_kernel(start);
- /* Ensure that we terminate if a child dies. */
+ /* Ensure that we terminate if a device-servicing child dies. */
signal(SIGCHLD, kill_launcher);
/* If we exit via err(), this kills all the threads, restores tty. */
The validator tracks lock-class usage history into 4n + 1 separate state bits:
- 'ever held in STATE context'
-- 'ever head as readlock in STATE context'
-- 'ever head with STATE enabled'
-- 'ever head as readlock with STATE enabled'
+- 'ever held as readlock in STATE context'
+- 'ever held with STATE enabled'
+- 'ever held as readlock with STATE enabled'
Where STATE can be either one of (kernel/lockdep_states.h)
- hardirq
This is the 6pack-mini-HOWTO, written by
Andreas Könsgen DG3KQ
-Internet: ajk@iehk.rwth-aachen.de
+Internet: ajk@comnets.uni-bremen.de
AMPR-net: dg3kq@db0pra.ampr.org
AX.25: dg3kq@db0ach.#nrw.deu.eu
string plus two varargs one would need to allocate a (3 * sizeof(long))
byte data area in the debug_register() function.
+IMPORTANT: Using "%s" in sprintf event functions is dangerous. You can only
+use "%s" in the sprintf event functions, if the memory for the passed string is
+available as long as the debug feature exists. The reason behind this is that
+due to performance considerations only a pointer to the string is stored in
+the debug feature. If you log a string that is freed afterwards, you will get
+an OOPS when inspecting the debug feature, because then the debug feature will
+access the already freed memory.
NOTE: If using the sprintf view do NOT use other event/exception functions
than the sprintf-event and -exception functions.
realtime tasks have explicitly allocated the CPU time they need to perform
their tasks, buffer underruns in the graphics or audio can be eliminated.
-NOTE: the above example is not fully implemented as of yet (2.6.25). We still
+NOTE: the above example is not fully implemented yet. We still
lack an EDF scheduler to make non-uniform periods usable.
.o CONFIG_CGROUP_SCHED (aka "Basis for grouping tasks" = "Control groups")
-This uses the /cgroup virtual file system and "/cgroup/<cgroup>/cpu.rt_runtime_us"
-to control the CPU time reserved for each control group instead.
+This uses the /cgroup virtual file system and
+"/cgroup/<cgroup>/cpu.rt_runtime_us" to control the CPU time reserved for each
+control group instead.
For more information on working with control groups, you should read
Documentation/cgroups/cgroups.txt as well.
-Group settings are checked against the following limits in order to keep the configuration
-schedulable:
+Group settings are checked against the following limits in order to keep the
+configuration schedulable:
\Sum_{i} runtime_{i} / global_period <= global_runtime / global_period
the biggest challenge as the current linux PI infrastructure is geared towards
the limited static priority levels 0-99. With deadline scheduling you need to
do deadline inheritance (since priority is inversely proportional to the
-deadline delta (deadline - now).
+deadline delta (deadline - now)).
This means the whole PI machinery will have to be reworked - and that is one of
the most complex pieces of code we have.
slots - Reserve the slot index for the given driver.
This option takes multiple strings.
See "Module Autoloading Support" section for details.
+ debug - Specifies the debug message level
+ (0 = disable debug prints, 1 = normal debug messages,
+ 2 = verbose debug messages)
+ This option appears only when CONFIG_SND_DEBUG=y.
+ This option can be dynamically changed via sysfs
+ /sys/modules/snd/parameters/debug file.
Module snd-pcm-oss
------------------
or input, but you may use this module for any application which
requires a sound card (like RealPlayer).
+ pcm_devs - Number of PCM devices assigned to each card
+ (default = 1, up to 4)
+ pcm_substreams - Number of PCM substreams assigned to each PCM
+ (default = 8, up to 16)
+ hrtimer - Use hrtimer (=1, default) or system timer (=0)
+ fake_buffer - Fake buffer allocations (default = 1)
+
+ When multiple PCM devices are created, snd-dummy gives different
+ behavior to each PCM device:
+ 0 = interleaved with mmap support
+ 1 = non-interleaved with mmap support
+ 2 = interleaved without mmap
+ 3 = non-interleaved without mmap
+
+ As default, snd-dummy drivers doesn't allocate the real buffers
+ but either ignores read/write or mmap a single dummy page to all
+ buffer pages, in order to save the resouces. If your apps need
+ the read/ written buffer data to be consistent, pass fake_buffer=0
+ option.
+
The power-management is supported.
Module snd-echo3g
bdl_pos_adj - Specifies the DMA IRQ timing delay in samples.
Passing -1 will make the driver to choose the appropriate
value based on the controller chip.
+ patch - Specifies the early "patch" files to modify the HD-audio
+ setup before initializing the codecs. This option is
+ available only when CONFIG_SND_HDA_PATCH_LOADER=y is set.
+ See HD-Audio.txt for details.
[Single (global) options]
single_cmd - Use single immediate commands to communicate with
samsung-nc10 Samsung NC10 mini notebook
auto auto-config reading BIOS (default)
-ALC882/885
-==========
+ALC882/883/885/888/889
+======================
3stack-dig 3-jack with SPDIF I/O
6stack-dig 6-jack digital with SPDIF I/O
arima Arima W820Di1
mbp3 Macbook Pro rev3
imac24 iMac 24'' with jack detection
w2jc ASUS W2JC
- auto auto-config reading BIOS (default)
-
-ALC883/888
-==========
- 3stack-dig 3-jack with SPDIF I/O
- 6stack-dig 6-jack digital with SPDIF I/O
+ 3stack-2ch-dig 3-jack with SPDIF I/O (ALC883)
+ alc883-6stack-dig 6-jack digital with SPDIF I/O (ALC883)
3stack-6ch 3-jack 6-channel
3stack-6ch-dig 3-jack 6-channel with SPDIF I/O
6stack-dig-demo 6-jack digital for Intel demo board
acer-aspire Acer Aspire 9810
acer-aspire-4930g Acer Aspire 4930G
acer-aspire-6530g Acer Aspire 6530G
+ acer-aspire-7730g Acer Aspire 7730G
acer-aspire-8930g Acer Aspire 8930G
medion Medion Laptops
medion-md2 Medion MD2
3stack-hp HP machines with 3stack (Lucknow, Samba boards)
6stack-dell Dell machines with 6stack (Inspiron 530)
mitac Mitac 8252D
+ clevo-m540r Clevo M540R (6ch + digital)
clevo-m720 Clevo M720 laptop series
fujitsu-pi2515 Fujitsu AMILO Pi2515
fujitsu-xa3530 Fujitsu AMILO XA3530
3stack-6ch-intel Intel DG33* boards
+ intel-alc889a Intel IbexPeak with ALC889A
+ intel-x58 Intel DX58 with ALC889
asus-p5q ASUS P5Q-EM boards
mb31 MacBook 3,1
sony-vaio-tt Sony VAIO TT
======
basic default configuration
thinkpad Lenovo Thinkpad T61/X61
- dell Dell T3400
+ dell_desktop Dell T3400
AD1986A
=======
laptop-micsense Laptop with Mic sense (old model fujitsu)
laptop-hpmicsense Laptop with HP and Mic senses
benq Benq R55E
+ laptop-hp530 HP 530 laptop
test for testing/debugging purpose, almost all controls
can be adjusted. Appearing only when compiled with
$CONFIG_SND_DEBUG=y
hp-dv6736 HP dv6736
lenovo-x200 Lenovo X200 laptop
+Conexant 5066
+=============
+ laptop Basic Laptop config (default)
+ dell-laptop Dell laptops
+ olpc-xo-1_5 OLPC XO 1.5
+
STAC9200
========
ref Reference board
+ oqo OQO Model 2
dell-d21 Dell (unknown)
dell-d22 Dell (unknown)
dell-d23 Dell (unknown)
===========
ref Reference board
no-jd BIOS setup but without jack-detection
+ intel Intel DG45* mobos
dell-m6-amic Dell desktops/laptops with analog mics
dell-m6-dmic Dell desktops/laptops with digital mics
dell-m6 Dell desktops/laptops with both type of mics
dell-eq Dell desktops/laptops
+ alienware Alienware M17x
auto BIOS setup (default)
STAC92HD83*
========
vaio VAIO laptop without SPDIF
auto BIOS setup (default)
+
+Cirrus Logic CS4206/4207
+========================
+ mbp55 MacBook Pro 5,5
+ auto BIOS setup (default)
The driver checks PCI SSID and looks through the static configuration
table until any matching entry is found. If you have a new machine,
you may see a message like below:
+------------------------------------------------------------------------
+ hda_codec: ALC880: BIOS auto-probing.
+------------------------------------------------------------------------
+Meanwhile, in the earlier versions, you would see a message like:
------------------------------------------------------------------------
hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...
------------------------------------------------------------------------
------------------------------------------------------------------------
+Early Patching
+~~~~~~~~~~~~~~
+When CONFIG_SND_HDA_PATCH_LOADER=y is set, you can pass a "patch" as a
+firmware file for modifying the HD-audio setup before initializing the
+codec. This can work basically like the reconfiguration via sysfs in
+the above, but it does it before the first codec configuration.
+
+A patch file is a plain text file which looks like below:
+
+------------------------------------------------------------------------
+ [codec]
+ 0x12345678 0xabcd1234 2
+
+ [model]
+ auto
+
+ [pincfg]
+ 0x12 0x411111f0
+
+ [verb]
+ 0x20 0x500 0x03
+ 0x20 0x400 0xff
+
+ [hint]
+ hp_detect = yes
+------------------------------------------------------------------------
+
+The file needs to have a line `[codec]`. The next line should contain
+three numbers indicating the codec vendor-id (0x12345678 in the
+example), the codec subsystem-id (0xabcd1234) and the address (2) of
+the codec. The rest patch entries are applied to this specified codec
+until another codec entry is given.
+
+The `[model]` line allows to change the model name of the each codec.
+In the example above, it will be changed to model=auto.
+Note that this overrides the module option.
+
+After the `[pincfg]` line, the contents are parsed as the initial
+default pin-configurations just like `user_pin_configs` sysfs above.
+The values can be shown in user_pin_configs sysfs file, too.
+
+Similarly, the lines after `[verb]` are parsed as `init_verbs`
+sysfs entries, and the lines after `[hint]` are parsed as `hints`
+sysfs entries, respectively.
+
+The hd-audio driver reads the file via request_firmware(). Thus,
+a patch file has to be located on the appropriate firmware path,
+typically, /lib/firmware. For example, when you pass the option
+`patch=hda-init.fw`, the file /lib/firmware/hda-init-fw must be
+present.
+
+The patch module option is specific to each card instance, and you
+need to give one file name for each instance, separated by commas.
+For example, if you have two cards, one for an on-board analog and one
+for an HDMI video board, you may pass patch option like below:
+------------------------------------------------------------------------
+ options snd-hda-intel patch=on-board-patch,hdmi-patch
+------------------------------------------------------------------------
+
+
Power-Saving
~~~~~~~~~~~~
The power-saving is a kind of auto-suspend of the device. When the
bit 0 = Enable XRUN/jiffies debug messages
bit 1 = Show stack trace at XRUN / jiffies check
bit 2 = Enable additional jiffies check
+ bit 3 = Log hwptr update at each period interrupt
+ bit 4 = Log hwptr update at each snd_pcm_update_hw_ptr()
When the bit 0 is set, the driver will show the messages to
kernel log when an xrun is detected. The debug message is
buggy) hardware that doesn't give smooth pointer updates.
This feature is enabled via the bit 2.
+ Bits 3 and 4 are for logging the hwptr records. Note that
+ these will give flood of kernel messages.
+
card*/pcm*/sub*/info
The general information of this PCM sub-stream.
show up in /proc/sys/kernel:
- acpi_video_flags
- acct
+- callhome [ S390 only ]
- auto_msgmni
- core_pattern
- core_uses_pid
==============================================================
+callhome:
+
+Controls the kernel's callhome behavior in case of a kernel panic.
+
+The s390 hardware allows an operating system to send a notification
+to a service organization (callhome) in case of an operating system panic.
+
+When the value in this file is 0 (which is the default behavior)
+nothing happens in case of a kernel panic. If this value is set to "1"
+the complete kernel oops message is send to the IBM customer service
+organization in case the mainframe the Linux operating system is running
+on has a service contract with IBM.
+
+==============================================================
+
core_pattern:
core_pattern is used to specify a core dumpfile pattern name.
'b' - Will immediately reboot the system without syncing or unmounting
your disks.
-'c' - Will perform a kexec reboot in order to take a crashdump.
+'c' - Will perform a system crash by a NULL pointer dereference.
+ A crashdump will be taken if configured.
'd' - Shows all locks that are held.
re'B'oot is good when you're unable to shut down. But you should also 'S'ync
and 'U'mount first.
-'C'rashdump can be used to manually trigger a crashdump when the system is hung.
-The kernel needs to have been built with CONFIG_KEXEC enabled.
+'C'rash can be used to manually trigger a crashdump when the system is hung.
+Note that this just triggers a crash if there is no dump mechanism available.
'S'ync is great when your system is locked up, it allows you to sync your
disks and will certainly lessen the chance of data loss and fscking. Note
0 -> Unknown EM2800 video grabber (em2800) [eb1a:2800]
- 1 -> Unknown EM2750/28xx video grabber (em2820/em2840) [eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883]
+ 1 -> Unknown EM2750/28xx video grabber (em2820/em2840) [eb1a:2710,eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883]
2 -> Terratec Cinergy 250 USB (em2820/em2840) [0ccd:0036]
3 -> Pinnacle PCTV USB 2 (em2820/em2840) [2304:0208]
4 -> Hauppauge WinTV USB 2 (em2820/em2840) [2040:4200,2040:4201]
19 -> EM2860/SAA711X Reference Design (em2860)
20 -> AMD ATI TV Wonder HD 600 (em2880) [0438:b002]
21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder (em2800) [eb1a:2801]
- 22 -> Unknown EM2750/EM2751 webcam grabber (em2750) [eb1a:2750,eb1a:2751]
+ 22 -> EM2710/EM2750/EM2751 webcam grabber (em2750) [eb1a:2750,eb1a:2751]
23 -> Huaqi DLCW-130 (em2750)
24 -> D-Link DUB-T210 TV Tuner (em2820/em2840) [2001:f112]
25 -> Gadmei UTV310 (em2820/em2840)
152 -> Asus Tiger Rev:1.00 [1043:4857]
153 -> Kworld Plus TV Analog Lite PCI [17de:7128]
154 -> Avermedia AVerTV GO 007 FM Plus [1461:f31d]
-155 -> Hauppauge WinTV-HVR1120 ATSC/QAM-Hybrid [0070:6706,0070:6708]
-156 -> Hauppauge WinTV-HVR1110r3 DVB-T/Hybrid [0070:6707,0070:6709,0070:670a]
+155 -> Hauppauge WinTV-HVR1150 ATSC/QAM-Hybrid [0070:6706,0070:6708]
+156 -> Hauppauge WinTV-HVR1120 DVB-T/Hybrid [0070:6707,0070:6709,0070:670a]
157 -> Avermedia AVerTV Studio 507UA [1461:a11b]
158 -> AVerMedia Cardbus TV/Radio (E501R) [1461:b7e9]
159 -> Beholder BeholdTV 505 RDS [0000:505B]
zc3xx 0458:700c Genius VideoCam V3
zc3xx 0458:700f Genius VideoCam Web V2
sonixj 0458:7025 Genius Eye 311Q
+sn9c20x 0458:7029 Genius Look 320s
sonixj 0458:702e Genius Slim 310 NB
+sn9c20x 045e:00f4 LifeCam VX-6000 (SN9C20x + OV9650)
sonixj 045e:00f5 MicroSoft VX3000
sonixj 045e:00f7 MicroSoft VX1000
ov519 045e:028c Micro$oft xbox cam
sonixj 0c45:613b Surfer SN-206
sonixj 0c45:613c Sonix Pccam168
sonixj 0c45:6143 Sonix Pccam168
+sn9c20x 0c45:6240 PC Camera (SN9C201 + MT9M001)
+sn9c20x 0c45:6242 PC Camera (SN9C201 + MT9M111)
+sn9c20x 0c45:6248 PC Camera (SN9C201 + OV9655)
+sn9c20x 0c45:624e PC Camera (SN9C201 + SOI968)
+sn9c20x 0c45:624f PC Camera (SN9C201 + OV9650)
+sn9c20x 0c45:6251 PC Camera (SN9C201 + OV9650)
+sn9c20x 0c45:6253 PC Camera (SN9C201 + OV9650)
+sn9c20x 0c45:6260 PC Camera (SN9C201 + OV7670)
+sn9c20x 0c45:6270 PC Camera (SN9C201 + MT9V011/MT9V111/MT9V112)
+sn9c20x 0c45:627b PC Camera (SN9C201 + OV7660)
+sn9c20x 0c45:627c PC Camera (SN9C201 + HV7131R)
+sn9c20x 0c45:627f PC Camera (SN9C201 + OV9650)
+sn9c20x 0c45:6280 PC Camera (SN9C202 + MT9M001)
+sn9c20x 0c45:6282 PC Camera (SN9C202 + MT9M111)
+sn9c20x 0c45:6288 PC Camera (SN9C202 + OV9655)
+sn9c20x 0c45:628e PC Camera (SN9C202 + SOI968)
+sn9c20x 0c45:628f PC Camera (SN9C202 + OV9650)
+sn9c20x 0c45:62a0 PC Camera (SN9C202 + OV7670)
+sn9c20x 0c45:62b0 PC Camera (SN9C202 + MT9V011/MT9V111/MT9V112)
+sn9c20x 0c45:62b3 PC Camera (SN9C202 + OV9655)
+sn9c20x 0c45:62bb PC Camera (SN9C202 + OV7660)
+sn9c20x 0c45:62bc PC Camera (SN9C202 + HV7131R)
sunplus 0d64:0303 Sunplus FashionCam DXG
etoms 102c:6151 Qcam Sangha CIF
etoms 102c:6251 Qcam xxxxxx VGA
zc3xx 10fd:8050 Typhoon Webshot II USB 300k
ov534 1415:2000 Sony HD Eye for PS3 (SLEH 00201)
pac207 145f:013a Trust WB-1300N
+sn9c20x 145f:013d Trust WB-3600R
vc032x 15b8:6001 HP 2.0 Megapixel
vc032x 15b8:6002 HP 2.0 Megapixel rz406aa
spca501 1776:501c Arowana 300K CMOS Camera
spca508 8086:0110 Intel Easy PC Camera
spca500 8086:0630 Intel Pocket PC Camera
spca506 99fa:8988 Grandtec V.cap
+sn9c20x a168:0610 Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x a168:0611 Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x a168:0613 Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x a168:0618 Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x a168:0614 Dino-Lite Digital Microscope (SN9C201 + MT9M111)
+sn9c20x a168:0615 Dino-Lite Digital Microscope (SN9C201 + MT9M111)
+sn9c20x a168:0617 Dino-Lite Digital Microscope (SN9C201 + MT9M111)
spca561 abcd:cdee Petcam
order. If you could add yourselves to it in alphabetical order that would be
so much easier [Ed]
-P: Person
-M: Mail patches to
+P: Person (obsolete)
+M: Mail patches to: FullName <address@domain>
L: Mailing list that is relevant to this area
W: Web-page with status/info
T: SCM tree type and location. Type is one of: git, hg, quilt, stgit.
matches all files in and below net excluding net/ipv6/
3C505 NETWORK DRIVER
-P: Philip Blundell
-M: philb@gnu.org
+M: Philip Blundell <philb@gnu.org>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/3c505*
3C59X NETWORK DRIVER
-P: Steffen Klassert
-M: klassert@mathematik.tu-chemnitz.de
+M: Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
L: netdev@vger.kernel.org
S: Maintained
F: Documentation/networking/vortex.txt
F: drivers/net/3c59x.c
3CR990 NETWORK DRIVER
-P: David Dillow
-M: dave@thedillows.org
+M: David Dillow <dave@thedillows.org>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/typhoon*
3W-9XXX SATA-RAID CONTROLLER DRIVER
-P: Adam Radford
-M: linuxraid@amcc.com
+M: Adam Radford <linuxraid@amcc.com>
L: linux-scsi@vger.kernel.org
W: http://www.amcc.com
S: Supported
F: drivers/scsi/3w-9xxx*
3W-XXXX ATA-RAID CONTROLLER DRIVER
-P: Adam Radford
-M: linuxraid@amcc.com
+M: Adam Radford <linuxraid@amcc.com>
L: linux-scsi@vger.kernel.org
W: http://www.amcc.com
S: Supported
F: drivers/scsi/3w-xxxx*
53C700 AND 53C700-66 SCSI DRIVER
-P: James E.J. Bottomley
-M: James.Bottomley@HansenPartnership.com
+M: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
L: linux-scsi@vger.kernel.org
S: Maintained
F: drivers/scsi/53c700*
6PACK NETWORK DRIVER FOR AX.25
-P: Andreas Koensgen
-M: ajk@iehk.rwth-aachen.de
+M: Andreas Koensgen <ajk@comnets.uni-bremen.de>
L: linux-hams@vger.kernel.org
S: Maintained
F: drivers/net/hamradio/6pack.c
8169 10/100/1000 GIGABIT ETHERNET DRIVER
-P: Francois Romieu
-M: romieu@fr.zoreil.com
+M: Francois Romieu <romieu@fr.zoreil.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/r8169.c
8250/16?50 (AND CLONE UARTS) SERIAL DRIVER
-P: Alan Cox
-M: alan@lxorguk.ukuu.org.uk
L: linux-serial@vger.kernel.org
W: http://serial.sourceforge.net
-S: Odd Fixes
+S: Orphan
F: drivers/serial/8250*
F: include/linux/serial_8250.h
8390 NETWORK DRIVERS [WD80x3/SMC-ELITE, SMC-ULTRA, NE2000, 3C503, etc.]
-P: Paul Gortmaker
-M: p_gortmaker@yahoo.com
+M: Paul Gortmaker <p_gortmaker@yahoo.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/*8390*
F: drivers/net/ax88796.c
9P FILE SYSTEM
-P: Eric Van Hensbergen
-M: ericvh@gmail.com
-P: Ron Minnich
-M: rminnich@sandia.gov
-P: Latchesar Ionkov
-M: lucho@ionkov.net
+M: Eric Van Hensbergen <ericvh@gmail.com>
+M: Ron Minnich <rminnich@sandia.gov>
+M: Latchesar Ionkov <lucho@ionkov.net>
L: v9fs-developer@lists.sourceforge.net
W: http://swik.net/v9fs
T: git git://git.kernel.org/pub/scm/linux/kernel/ericvh/v9fs.git
F: fs/9p/
A2232 SERIAL BOARD DRIVER
-P: Enver Haase
-M: A2232@gmx.net
+M: Enver Haase <A2232@gmx.net>
L: linux-m68k@lists.linux-m68k.org
S: Maintained
F: drivers/char/ser_a2232*
AACRAID SCSI RAID DRIVER
-P: Adaptec OEM Raid Solutions
-M: aacraid@adaptec.com
+M: Adaptec OEM Raid Solutions <aacraid@adaptec.com>
L: linux-scsi@vger.kernel.org
W: http://www.adaptec.com/
S: Supported
F: drivers/scsi/aacraid/
ABIT UGURU 1,2 HARDWARE MONITOR DRIVER
-P: Hans de Goede
-M: j.w.r.degoede@hhs.nl
+M: Hans de Goede <j.w.r.degoede@hhs.nl>
L: lm-sensors@lm-sensors.org
S: Maintained
F: drivers/hwmon/abituguru.c
ABIT UGURU 3 HARDWARE MONITOR DRIVER
-P: Alistair John Strachan
-M: alistair@devzero.co.uk
+M: Alistair John Strachan <alistair@devzero.co.uk>
L: lm-sensors@lm-sensors.org
S: Maintained
F: drivers/hwmon/abituguru3.c
ACENIC DRIVER
-P: Jes Sorensen
-M: jes@trained-monkey.org
+M: Jes Sorensen <jes@trained-monkey.org>
L: linux-acenic@sunsite.dk
S: Maintained
F: drivers/net/acenic*
ACER ASPIRE ONE TEMPERATURE AND FAN DRIVER
-P: Peter Feuerer
-M: peter@piie.net
-W: http://piie.net/?section=acerhdf
-S: Maintained
-F: drivers/platform/x86/acerhdf.c
+M: Peter Feuerer <peter@piie.net>
+W: http://piie.net/?section=acerhdf
+S: Maintained
+F: drivers/platform/x86/acerhdf.c
ACER WMI LAPTOP EXTRAS
-P: Carlos Corbacho
-M: carlos@strangeworlds.co.uk
+M: Carlos Corbacho <carlos@strangeworlds.co.uk>
L: aceracpi@googlegroups.com (subscribers-only)
W: http://code.google.com/p/aceracpi
S: Maintained
F: drivers/platform/x86/acer-wmi.c
ACPI
-P: Len Brown
-M: lenb@kernel.org
+M: Len Brown <lenb@kernel.org>
L: linux-acpi@vger.kernel.org
W: http://www.lesswatts.org/projects/acpi/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git
F: include/linux/acpi.h
ACPI BATTERY DRIVERS
-P: Alexey Starikovskiy
-M: astarikovskiy@suse.de
+M: Alexey Starikovskiy <astarikovskiy@suse.de>
L: linux-acpi@vger.kernel.org
W: http://www.lesswatts.org/projects/acpi/
S: Supported
F: drivers/acpi/*sbs*
ACPI EC DRIVER
-P: Alexey Starikovskiy
-M: astarikovskiy@suse.de
+M: Alexey Starikovskiy <astarikovskiy@suse.de>
L: linux-acpi@vger.kernel.org
W: http://www.lesswatts.org/projects/acpi/
S: Supported
F: drivers/acpi/ec.c
ACPI FAN DRIVER
-P: Zhang Rui
-M: rui.zhang@intel.com
+M: Zhang Rui <rui.zhang@intel.com>
L: linux-acpi@vger.kernel.org
W: http://www.lesswatts.org/projects/acpi/
S: Supported
F: drivers/acpi/fan.c
ACPI PCI HOTPLUG DRIVER
-P: Kristen Carlson Accardi
-M: kristen.c.accardi@intel.com
+M: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
L: linux-pci@vger.kernel.org
S: Supported
F: drivers/pci/hotplug/acpi*
ACPI THERMAL DRIVER
-P: Zhang Rui
-M: rui.zhang@intel.com
+M: Zhang Rui <rui.zhang@intel.com>
L: linux-acpi@vger.kernel.org
W: http://www.lesswatts.org/projects/acpi/
S: Supported
F: drivers/acpi/*thermal*
ACPI VIDEO DRIVER
-P: Zhang Rui
-M: rui.zhang@intel.com
+M: Zhang Rui <rui.zhang@intel.com>
L: linux-acpi@vger.kernel.org
W: http://www.lesswatts.org/projects/acpi/
S: Supported
F: drivers/acpi/video.c
ACPI WMI DRIVER
-P: Carlos Corbacho
-M: carlos@strangeworlds.co.uk
+M: Carlos Corbacho <carlos@strangeworlds.co.uk>
L: linux-acpi@vger.kernel.org
W: http://www.lesswatts.org/projects/acpi/
S: Maintained
F: drivers/platform/x86/wmi.c
AD1889 ALSA SOUND DRIVER
-P: Kyle McMartin
-M: kyle@mcmartin.ca
-P: Thibaut Varene
-M: T-Bone@parisc-linux.org
+M: Kyle McMartin <kyle@mcmartin.ca>
+M: Thibaut Varene <T-Bone@parisc-linux.org>
W: http://wiki.parisc-linux.org/AD1889
L: linux-parisc@vger.kernel.org
S: Maintained
F: sound/pci/ad1889.*
ADM1025 HARDWARE MONITOR DRIVER
-P: Jean Delvare
-M: khali@linux-fr.org
+M: Jean Delvare <khali@linux-fr.org>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/adm1025
F: drivers/hwmon/adm1025.c
ADM1029 HARDWARE MONITOR DRIVER
-P: Corentin Labbe
-M: corentin.labbe@geomatys.fr
+M: Corentin Labbe <corentin.labbe@geomatys.fr>
L: lm-sensors@lm-sensors.org
S: Maintained
F: drivers/hwmon/adm1029.c
ADM8211 WIRELESS DRIVER
-P: Michael Wu
-M: flamingice@sourmilk.net
+M: Michael Wu <flamingice@sourmilk.net>
L: linux-wireless@vger.kernel.org
W: http://linuxwireless.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mwu/mac80211-drivers.git
F: drivers/net/wireless/adm8211.*
ADT746X FAN DRIVER
-P: Colin Leroy
-M: colin@colino.net
+M: Colin Leroy <colin@colino.net>
S: Maintained
F: drivers/macintosh/therm_adt746x.c
ADVANSYS SCSI DRIVER
-P: Matthew Wilcox
-M: matthew@wil.cx
+M: Matthew Wilcox <matthew@wil.cx>
L: linux-scsi@vger.kernel.org
S: Maintained
F: Documentation/scsi/advansys.txt
F: drivers/scsi/advansys.c
AEDSP16 DRIVER
-P: Riccardo Facchetti
-M: fizban@tin.it
+M: Riccardo Facchetti <fizban@tin.it>
S: Maintained
F: sound/oss/aedsp16.c
AFFS FILE SYSTEM
-P: Roman Zippel
-M: zippel@linux-m68k.org
+M: Roman Zippel <zippel@linux-m68k.org>
S: Maintained
F: Documentation/filesystems/affs.txt
F: fs/affs/
AFS FILESYSTEM & AF_RXRPC SOCKET DOMAIN
-P: David Howells
-M: dhowells@redhat.com
+M: David Howells <dhowells@redhat.com>
L: linux-afs@lists.infradead.org
S: Supported
F: fs/afs/
F: net/rxrpc/af_rxrpc.c
AGPGART DRIVER
-P: David Airlie
-M: airlied@linux.ie
+M: David Airlie <airlied@linux.ie>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git
S: Maintained
F: drivers/char/agp/
F: include/linux/agp*
AHA152X SCSI DRIVER
-P: Juergen E. Fischer
-M: fischer@norbit.de
+M: "Juergen E. Fischer" <fischer@norbit.de>
L: linux-scsi@vger.kernel.org
S: Maintained
F: drivers/scsi/aha152x*
F: drivers/scsi/pcmcia/aha152x*
AIC7XXX / AIC79XX SCSI DRIVER
-P: Hannes Reinecke
-M: hare@suse.de
+M: Hannes Reinecke <hare@suse.de>
L: linux-scsi@vger.kernel.org
S: Maintained
F: drivers/scsi/aic7xxx/
F: drivers/scsi/aic7xxx_old/
AIO
-P: Benjamin LaHaise
-M: bcrl@kvack.org
+M: Benjamin LaHaise <bcrl@kvack.org>
L: linux-aio@kvack.org
S: Supported
F: fs/aio.c
F: include/linux/*aio*.h
ALCATEL SPEEDTOUCH USB DRIVER
-P: Duncan Sands
-M: duncan.sands@free.fr
+M: Duncan Sands <duncan.sands@free.fr>
L: linux-usb@vger.kernel.org
W: http://www.linux-usb.org/SpeedTouch/
S: Maintained
F: drivers/usb/atm/usbatm.c
ALCHEMY AU1XX0 MMC DRIVER
-P: Manuel Lauss
-M: manuel.lauss@gmail.com
+M: Manuel Lauss <manuel.lauss@gmail.com>
S: Maintained
F: drivers/mmc/host/au1xmmc.c
ALI1563 I2C DRIVER
-P: Rudolf Marek
-M: r.marek@assembler.cz
+M: Rudolf Marek <r.marek@assembler.cz>
L: linux-i2c@vger.kernel.org
S: Maintained
F: Documentation/i2c/busses/i2c-ali1563
F: drivers/i2c/busses/i2c-ali1563.c
ALPHA PORT
-P: Richard Henderson
-M: rth@twiddle.net
+M: Richard Henderson <rth@twiddle.net>
S: Odd Fixes for 2.4; Maintained for 2.6.
-P: Ivan Kokshaysky
-M: ink@jurassic.park.msu.ru
+M: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
S: Maintained for 2.4; PCI support for 2.6.
L: linux-alpha@vger.kernel.org
F: arch/alpha/
AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER
-P: Thomas Dahlmann
-M: dahlmann.thomas@arcor.de
+M: Thomas Dahlmann <dahlmann.thomas@arcor.de>
L: linux-geode@lists.infradead.org (moderated for non-subscribers)
S: Supported
F: drivers/usb/gadget/amd5536udc.*
F: arch/x86/include/asm/geode.h
AMD IOMMU (AMD-VI)
-P: Joerg Roedel
-M: joerg.roedel@amd.com
+M: Joerg Roedel <joerg.roedel@amd.com>
L: iommu@lists.linux-foundation.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu.git
S: Supported
F: arch/x86/include/asm/amd_iommu*.h
AMD MICROCODE UPDATE SUPPORT
-P: Andreas Herrmann
-M: andreas.herrmann3@amd.com
+M: Andreas Herrmann <andreas.herrmann3@amd.com>
L: amd64-microcode@amd64.org
S: Supported
F: arch/x86/kernel/microcode_amd.c
AMS (Apple Motion Sensor) DRIVER
-P: Stelian Pop
-M: stelian@popies.net
-P: Michael Hanselmann
-M: linux-kernel@hansmi.ch
+M: Stelian Pop <stelian@popies.net>
+M: Michael Hanselmann <linux-kernel@hansmi.ch>
S: Supported
F: drivers/hwmon/ams/
AMSO1100 RNIC DRIVER
-P: Tom Tucker
-M: tom@opengridcomputing.com
-P: Steve Wise
-M: swise@opengridcomputing.com
-L: general@lists.openfabrics.org
+M: Tom Tucker <tom@opengridcomputing.com>
+M: Steve Wise <swise@opengridcomputing.com>
+L: linux-rdma@vger.kernel.org
S: Maintained
F: drivers/infiniband/hw/amso1100/
AOA (Apple Onboard Audio) ALSA DRIVER
-P: Johannes Berg
-M: johannes@sipsolutions.net
+M: Johannes Berg <johannes@sipsolutions.net>
L: linuxppc-dev@ozlabs.org
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Maintained
F: sound/aoa/
APM DRIVER
-P: Stephen Rothwell
-M: sfr@canb.auug.org.au
+M: Stephen Rothwell <sfr@canb.auug.org.au>
L: linux-laptop@vger.kernel.org
W: http://www.canb.auug.org.au/~sfr/
S: Supported
F: include/linux/apm_bios.h
APPLE BCM5974 MULTITOUCH DRIVER
-P: Henrik Rydberg
-M: rydberg@euromail.se
+M: Henrik Rydberg <rydberg@euromail.se>
L: linux-input@vger.kernel.org
S: Maintained
F: drivers/input/mouse/bcm5974.c
APPLE SMC DRIVER
-P: Nicolas Boichat
-M: nicolas@boichat.ch
+M: Nicolas Boichat <nicolas@boichat.ch>
L: mactel-linux-devel@lists.sourceforge.net
S: Maintained
F: drivers/hwmon/applesmc.c
APPLETALK NETWORK LAYER
-P: Arnaldo Carvalho de Melo
-M: acme@ghostprotocols.net
+M: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
S: Maintained
F: drivers/net/appletalk/
F: net/appletalk/
APPLETOUCH TOUCHPAD DRIVER
-P: Johannes Berg
-M: johannes@sipsolutions.net
+M: Johannes Berg <johannes@sipsolutions.net>
L: linux-input@vger.kernel.org
S: Maintained
F: Documentation/input/appletouch.txt
F: drivers/input/mouse/appletouch.c
ARC FRAMEBUFFER DRIVER
-P: Jaya Kumar
-M: jayalk@intworks.biz
+M: Jaya Kumar <jayalk@intworks.biz>
S: Maintained
F: drivers/video/arcfb.c
F: drivers/video/fb_defio.c
ARM MFM AND FLOPPY DRIVERS
-P: Ian Molton
-M: spyro@f2s.com
+M: Ian Molton <spyro@f2s.com>
S: Maintained
F: arch/arm/lib/floppydma.S
F: arch/arm/include/asm/floppy.h
ARM PORT
-P: Russell King
-M: linux@arm.linux.org.uk
+M: Russell King <linux@arm.linux.org.uk>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.arm.linux.org.uk/
S: Maintained
F: drivers/mmc/host/mmci.*
ARM/ADI ROADRUNNER MACHINE SUPPORT
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
+M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
F: arch/arm/mach-ixp23xx/
F: arch/arm/mach-ixp23xx/include/mach/
ARM/ADS SPHERE MACHINE SUPPORT
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
+M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/AFEB9260 MACHINE SUPPORT
-P: Sergey Lapin
-M: slapin@ossfans.org
+M: Sergey Lapin <slapin@ossfans.org>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/AJECO 1ARM MACHINE SUPPORT
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
+M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/ATMEL AT91RM9200 ARM ARCHITECTURE
-P: Andrew Victor
-M: linux@maxim.org.za
+M: Andrew Victor <linux@maxim.org.za>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://maxim.org.za/at91_26.html
S: Maintained
ARM/CIRRUS LOGIC EP93XX ARM ARCHITECTURE
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
+M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/CIRRUS LOGIC EDB9315A MACHINE SUPPORT
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
+M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/CLKDEV SUPPORT
-P: Russell King
-M: linux@arm.linux.org.uk
+M: Russell King <linux@arm.linux.org.uk>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
F: arch/arm/common/clkdev.c
F: arch/arm/include/asm/clkdev.h
ARM/COMPULAB CM-X270/EM-X270 and CM-X300 MACHINE SUPPORT
-P: Mike Rapoport
-M: mike@compulab.co.il
+M: Mike Rapoport <mike@compulab.co.il>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/CORGI MACHINE SUPPORT
-P: Richard Purdie
-M: rpurdie@rpsys.net
+M: Richard Purdie <rpurdie@rpsys.net>
S: Maintained
ARM/CORTINA SYSTEMS GEMINI ARM ARCHITECTURE
-P: Paulius Zaleckas
-M: paulius.zaleckas@teltonika.lt
+M: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
T: git git://gitorious.org/linux-gemini/mainline.git
S: Maintained
F: arch/arm/mach-gemini/
ARM/EBSA110 MACHINE SUPPORT
-P: Russell King
-M: linux@arm.linux.org.uk
+M: Russell King <linux@arm.linux.org.uk>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.arm.linux.org.uk/
S: Maintained
F: drivers/net/arm/am79c961a.*
ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6)
-P: Daniel Ribeiro
-M: drwyrm@gmail.com
-P: Stefan Schmidt
-M: stefan@openezx.org
-P: Harald Welte
-M: laforge@openezx.org
+M: Daniel Ribeiro <drwyrm@gmail.com>
+M: Stefan Schmidt <stefan@openezx.org>
+M: Harald Welte <laforge@openezx.org>
L: openezx-devel@lists.openezx.org (subscribers-only)
W: http://www.openezx.org/
S: Maintained
F: arch/arm/mach-pxa/ezx.c
ARM/FARADAY FA526 PORT
-P: Paulius Zaleckas
-M: paulius.zaleckas@teltonika.lt
+M: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
F: arch/arm/mm/*-fa*
ARM/FOOTBRIDGE ARCHITECTURE
-P: Russell King
-M: linux@arm.linux.org.uk
+M: Russell King <linux@arm.linux.org.uk>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.arm.linux.org.uk/
S: Maintained
F: arch/arm/mach-footbridge/
ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
-P: Sascha Hauer
-M: kernel@pengutronix.de
+M: Sascha Hauer <kernel@pengutronix.de>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
+M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/GUMSTIX MACHINE SUPPORT
-P: Steve Sakoman
-M: sakoman@gmail.com
+M: Steve Sakoman <sakoman@gmail.com>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/H4700 (HP IPAQ HX4700) MACHINE SUPPORT
-P: Philipp Zabel
-M: philipp.zabel@gmail.com
+M: Philipp Zabel <philipp.zabel@gmail.com>
S: Maintained
F: arch/arm/mach-pxa/hx4700.c
F: arch/arm/mach-pxa/include/mach/hx4700.h
ARM/HP JORNADA 7XX MACHINE SUPPORT
-P: Kristoffer Ericson
-M: kristoffer.ericson@gmail.com
+M: Kristoffer Ericson <kristoffer.ericson@gmail.com>
W: www.jlime.com
S: Maintained
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/kristoffer/linux-hpc.git
+F: arch/arm/mach-sa1100/jornada720.c
+F: arch/arm/mach-sa1100/include/mach/jornada720.h
ARM/INTEL IOP32X ARM ARCHITECTURE
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
-P: Dan Williams
-M: dan.j.williams@intel.com
+M: Lennert Buytenhek <kernel@wantstofly.org>
+M: Dan Williams <dan.j.williams@intel.com>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Supported
ARM/INTEL IOP33X ARM ARCHITECTURE
-P: Dan Williams
-M: dan.j.williams@intel.com
+M: Dan Williams <dan.j.williams@intel.com>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Supported
ARM/INTEL IOP13XX ARM ARCHITECTURE
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
-P: Dan Williams
-M: dan.j.williams@intel.com
+M: Lennert Buytenhek <kernel@wantstofly.org>
+M: Dan Williams <dan.j.williams@intel.com>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Supported
ARM/INTEL IQ81342EX MACHINE SUPPORT
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
-P: Dan Williams
-M: dan.j.williams@intel.com
+M: Lennert Buytenhek <kernel@wantstofly.org>
+M: Dan Williams <dan.j.williams@intel.com>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Supported
ARM/INTEL IXP2000 ARM ARCHITECTURE
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
+M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/INTEL IXDP2850 MACHINE SUPPORT
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
+M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/INTEL IXP23XX ARM ARCHITECTURE
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
+M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/INTEL XSC3 (MANZANO) ARM CORE
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
-P: Dan Williams
-M: dan.j.williams@intel.com
+M: Lennert Buytenhek <kernel@wantstofly.org>
+M: Dan Williams <dan.j.williams@intel.com>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Supported
ARM/IP FABRICS DOUBLE ESPRESSO MACHINE SUPPORT
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
+M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/LOGICPD PXA270 MACHINE SUPPORT
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
+M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/MAGICIAN MACHINE SUPPORT
-P: Philipp Zabel
-M: philipp.zabel@gmail.com
+M: Philipp Zabel <philipp.zabel@gmail.com>
S: Maintained
ARM/MIOA701 MACHINE SUPPORT
-P: Robert Jarzmik
-M: robert.jarzmik@free.fr
+M: Robert Jarzmik <robert.jarzmik@free.fr>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
F: arch/arm/mach-pxa/mioa701.c
S: Maintained
ARM/NEC MOBILEPRO 900/c MACHINE SUPPORT
-P: Michael Petchkovsky
-M: mkpetch@internode.on.net
+M: Michael Petchkovsky <mkpetch@internode.on.net>
S: Maintained
ARM/OPENMOKO NEO FREERUNNER (GTA02) MACHINE SUPPORT
-P: Nelson Castillo
-M: arhuaco@freaks-unidos.net
+M: Nelson Castillo <arhuaco@freaks-unidos.net>
L: openmoko-kernel@lists.openmoko.org (subscribers-only)
W: http://wiki.openmoko.org/wiki/Neo_FreeRunner
S: Supported
ARM/TOSA MACHINE SUPPORT
-P: Dmitry Eremin-Solenikov
-M: dbaryshkov@gmail.com
-P: Dirk Opfer
-M: dirk@opfer-online.de
+M: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+M: Dirk Opfer <dirk@opfer-online.de>
S: Maintained
ARM/PALMTX,PALMT5,PALMLD,PALMTE2 SUPPORT
-P: Marek Vasut
-M: marek.vasut@gmail.com
+M: Marek Vasut <marek.vasut@gmail.com>
W: http://hackndev.com
S: Maintained
ARM/PALM TREO 680 SUPPORT
-P: Tomas Cech
-M: sleep_walker@suse.cz
+M: Tomas Cech <sleep_walker@suse.cz>
W: http://hackndev.com
S: Maintained
ARM/PALMZ72 SUPPORT
-P: Sergey Lapin
-M: slapin@ossfans.org
+M: Sergey Lapin <slapin@ossfans.org>
W: http://hackndev.com
S: Maintained
ARM/PLEB SUPPORT
-P: Peter Chubb
-M: pleb@gelato.unsw.edu.au
+M: Peter Chubb <pleb@gelato.unsw.edu.au>
W: http://www.disy.cse.unsw.edu.au/Hardware/PLEB
S: Maintained
ARM/PT DIGITAL BOARD PORT
-P: Stefan Eletzhofer
-M: stefan.eletzhofer@eletztrick.de
+M: Stefan Eletzhofer <stefan.eletzhofer@eletztrick.de>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.arm.linux.org.uk/
S: Maintained
ARM/RADISYS ENP2611 MACHINE SUPPORT
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
+M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/RISCPC ARCHITECTURE
-P: Russell King
-M: linux@arm.linux.org.uk
+M: Russell King <linux@arm.linux.org.uk>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.arm.linux.org.uk/
S: Maintained
F: drivers/scsi/arm/
ARM/SHARK MACHINE SUPPORT
-P: Alexander Schulz
-M: alex@shark-linux.de
+M: Alexander Schulz <alex@shark-linux.de>
W: http://www.shark-linux.de/shark.html
S: Maintained
ARM/SAMSUNG ARM ARCHITECTURES
-P: Ben Dooks
-M: ben-linux@fluff.org
+M: Ben Dooks <ben-linux@fluff.org>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.fluff.org/ben/linux/
S: Maintained
F: arch/arm/plat-s3c24xx/
ARM/S3C2410 ARM ARCHITECTURE
-P: Ben Dooks
-M: ben-linux@fluff.org
+M: Ben Dooks <ben-linux@fluff.org>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.fluff.org/ben/linux/
S: Maintained
F: arch/arm/mach-s3c2410/
ARM/S3C2440 ARM ARCHITECTURE
-P: Ben Dooks
-M: ben-linux@fluff.org
+M: Ben Dooks <ben-linux@fluff.org>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.fluff.org/ben/linux/
S: Maintained
F: arch/arm/mach-s3c2440/
ARM/S3C2442 ARM ARCHITECTURE
-P: Ben Dooks
-M: ben-linux@fluff.org
+M: Ben Dooks <ben-linux@fluff.org>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.fluff.org/ben/linux/
S: Maintained
F: arch/arm/mach-s3c2442/
ARM/S3C2443 ARM ARCHITECTURE
-P: Ben Dooks
-M: ben-linux@fluff.org
+M: Ben Dooks <ben-linux@fluff.org>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.fluff.org/ben/linux/
S: Maintained
F: arch/arm/mach-s3c2443/
ARM/S3C6400 ARM ARCHITECTURE
-P: Ben Dooks
-M: ben-linux@fluff.org
+M: Ben Dooks <ben-linux@fluff.org>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.fluff.org/ben/linux/
S: Maintained
F: arch/arm/mach-s3c6400/
ARM/S3C6410 ARM ARCHITECTURE
-P: Ben Dooks
-M: ben-linux@fluff.org
+M: Ben Dooks <ben-linux@fluff.org>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.fluff.org/ben/linux/
S: Maintained
F: arch/arm/mach-s3c6410/
ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
+M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/THECUS N2100 MACHINE SUPPORT
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
+M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/NUVOTON W90X900 ARM ARCHITECTURE
-P: Wan ZongShun
-M: mcuos.com@gmail.com
+M: Wan ZongShun <mcuos.com@gmail.com>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.mcuos.com
S: Maintained
ARM/VFP SUPPORT
-P: Russell King
-M: linux@arm.linux.org.uk
+M: Russell King <linux@arm.linux.org.uk>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.arm.linux.org.uk/
S: Maintained
F: arch/arm/vfp/
-ARPD SUPPORT
-P: Jonathan Layes
-L: netdev@vger.kernel.org
-S: Maintained
-F: net/ipv4/arp.c
-
ASUS ACPI EXTRAS DRIVER
-P: Corentin Chary
-M: corentincj@iksaif.net
-P: Karol Kozimor
-M: sziwan@users.sourceforge.net
+M: Corentin Chary <corentincj@iksaif.net>
+M: Karol Kozimor <sziwan@users.sourceforge.net>
L: acpi4asus-user@lists.sourceforge.net
W: http://acpi4asus.sf.net
S: Maintained
F: drivers/platform/x86/asus_acpi.c
ASUS ASB100 HARDWARE MONITOR DRIVER
-P: Mark M. Hoffman
-M: mhoffman@lightlink.com
+M: "Mark M. Hoffman" <mhoffman@lightlink.com>
L: lm-sensors@lm-sensors.org
S: Maintained
F: drivers/hwmon/asb100.c
ASUS LAPTOP EXTRAS DRIVER
-P: Corentin Chary
-M: corentincj@iksaif.net
+M: Corentin Chary <corentincj@iksaif.net>
L: acpi4asus-user@lists.sourceforge.net
W: http://acpi4asus.sf.net
S: Maintained
F: drivers/platform/x86/asus-laptop.c
ASYNCHRONOUS TRANSFERS/TRANSFORMS (IOAT) API
-P: Dan Williams
-M: dan.j.williams@intel.com
-P: Maciej Sosnowski
-M: maciej.sosnowski@intel.com
+M: Dan Williams <dan.j.williams@intel.com>
+M: Maciej Sosnowski <maciej.sosnowski@intel.com>
W: http://sourceforge.net/projects/xscaleiop
S: Supported
F: Documentation/crypto/async-tx-api.txt
F: include/linux/async_tx.h
ATA OVER ETHERNET (AOE) DRIVER
-P: Ed L. Cashin
-M: ecashin@coraid.com
+M: "Ed L. Cashin" <ecashin@coraid.com>
W: http://www.coraid.com/support/linux
S: Supported
F: Documentation/aoe/
F: drivers/block/aoe/
ATHEROS ATH5K WIRELESS DRIVER
-P: Jiri Slaby
-M: jirislaby@gmail.com
-P: Nick Kossifidis
-M: mickflemm@gmail.com
-P: Luis R. Rodriguez
-M: lrodriguez@atheros.com
-P: Bob Copeland
-M: me@bobcopeland.com
+M: Jiri Slaby <jirislaby@gmail.com>
+M: Nick Kossifidis <mickflemm@gmail.com>
+M: "Luis R. Rodriguez" <lrodriguez@atheros.com>
+M: Bob Copeland <me@bobcopeland.com>
L: linux-wireless@vger.kernel.org
L: ath5k-devel@lists.ath5k.org
S: Maintained
F: drivers/net/wireless/ath/ath5k/
ATHEROS ATH9K WIRELESS DRIVER
-P: Luis R. Rodriguez
-M: lrodriguez@atheros.com
-P: Jouni Malinen
-M: jmalinen@atheros.com
-P: Sujith Manoharan
-M: Sujith.Manoharan@atheros.com
-P: Vasanthakumar Thiagarajan
-M: vasanth@atheros.com
-P: Senthil Balasubramanian
-M: senthilkumar@atheros.com
+M: "Luis R. Rodriguez" <lrodriguez@atheros.com>
+M: Jouni Malinen <jmalinen@atheros.com>
+M: Sujith Manoharan <Sujith.Manoharan@atheros.com>
+M: Vasanthakumar Thiagarajan <vasanth@atheros.com>
+M: Senthil Balasubramanian <senthilkumar@atheros.com>
L: linux-wireless@vger.kernel.org
L: ath9k-devel@lists.ath9k.org
S: Supported
F: drivers/net/wireless/ath/ath9k/
ATHEROS AR9170 WIRELESS DRIVER
-P: Christian Lamparter
-M: chunkeey@web.de
+M: Christian Lamparter <chunkeey@web.de>
L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org/en/users/Drivers/ar9170
S: Maintained
F: drivers/net/wireless/ath/ar9170/
ATI_REMOTE2 DRIVER
-P: Ville Syrjala
-M: syrjala@sci.fi
+M: Ville Syrjala <syrjala@sci.fi>
S: Maintained
F: drivers/input/misc/ati_remote2.c
ATLX ETHERNET DRIVERS
-P: Jay Cliburn
-M: jcliburn@gmail.com
-P: Chris Snook
-M: csnook@redhat.com
-P: Jie Yang
-M: jie.yang@atheros.com
+M: Jay Cliburn <jcliburn@gmail.com>
+M: Chris Snook <chris.snook@gmail.com>
+M: Jie Yang <jie.yang@atheros.com>
L: atl1-devel@lists.sourceforge.net
W: http://sourceforge.net/projects/atl1
W: http://atl1.sourceforge.net
F: drivers/net/atlx/
ATM
-P: Chas Williams
-M: chas@cmf.nrl.navy.mil
+M: Chas Williams <chas@cmf.nrl.navy.mil>
L: linux-atm-general@lists.sourceforge.net (subscribers-only)
L: netdev@vger.kernel.org
W: http://linux-atm.sourceforge.net
F: include/linux/atm*
ATMEL AT91 MCI DRIVER
-P: Nicolas Ferre
-M: nicolas.ferre@atmel.com
+M: Nicolas Ferre <nicolas.ferre@atmel.com>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.atmel.com/products/AT91/
W: http://www.at91.com/
F: drivers/mmc/host/at91_mci.c
ATMEL AT91 / AT32 MCI DRIVER
-P: Nicolas Ferre
-M: nicolas.ferre@atmel.com
+M: Nicolas Ferre <nicolas.ferre@atmel.com>
S: Maintained
F: drivers/mmc/host/atmel-mci.c
F: drivers/mmc/host/atmel-mci-regs.h
ATMEL AT91 / AT32 SERIAL DRIVER
-P: Haavard Skinnemoen
-M: hskinnemoen@atmel.com
+M: Haavard Skinnemoen <hskinnemoen@atmel.com>
S: Supported
F: drivers/serial/atmel_serial.c
ATMEL LCDFB DRIVER
-P: Nicolas Ferre
-M: nicolas.ferre@atmel.com
+M: Nicolas Ferre <nicolas.ferre@atmel.com>
L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
S: Maintained
F: drivers/video/atmel_lcdfb.c
F: include/video/atmel_lcdc.h
ATMEL MACB ETHERNET DRIVER
-P: Haavard Skinnemoen
-M: hskinnemoen@atmel.com
+M: Haavard Skinnemoen <hskinnemoen@atmel.com>
S: Supported
F: drivers/net/macb.*
ATMEL SPI DRIVER
-P: Haavard Skinnemoen
-M: hskinnemoen@atmel.com
+M: Haavard Skinnemoen <hskinnemoen@atmel.com>
S: Supported
F: drivers/spi/atmel_spi.*
ATMEL USBA UDC DRIVER
-P: Haavard Skinnemoen
-M: hskinnemoen@atmel.com
+M: Haavard Skinnemoen <hskinnemoen@atmel.com>
L: kernel@avr32linux.org
W: http://avr32linux.org/twiki/bin/view/Main/AtmelUsbDeviceDriver
S: Supported
F: drivers/usb/gadget/atmel_usba_udc.*
ATMEL WIRELESS DRIVER
-P: Simon Kelley
-M: simon@thekelleys.org.uk
+M: Simon Kelley <simon@thekelleys.org.uk>
L: linux-wireless@vger.kernel.org
W: http://www.thekelleys.org.uk/atmel
W: http://atmelwlandriver.sourceforge.net/
F: drivers/net/wireless/atmel*
AUDIT SUBSYSTEM
-P: Al Viro
-M: viro@zeniv.linux.org.uk
-P: Eric Paris
-M: eparis@redhat.com
+M: Al Viro <viro@zeniv.linux.org.uk>
+M: Eric Paris <eparis@redhat.com>
L: linux-audit@redhat.com (subscribers-only)
W: http://people.redhat.com/sgrubb/audit/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current.git
F: kernel/audit*
AUXILIARY DISPLAY DRIVERS
-P: Miguel Ojeda Sandonis
-M: miguel.ojeda.sandonis@gmail.com
+M: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>
W: http://miguelojeda.es/auxdisplay.htm
W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
S: Maintained
F: include/linux/cfag12864b.h
AVR32 ARCHITECTURE
-P: Haavard Skinnemoen
-M: hskinnemoen@atmel.com
+M: Haavard Skinnemoen <hskinnemoen@atmel.com>
W: http://www.atmel.com/products/AVR32/
W: http://avr32linux.org/
W: http://avrfreaks.net/
F: arch/avr32/
AVR32/AT32AP MACHINE SUPPORT
-P: Haavard Skinnemoen
-M: hskinnemoen@atmel.com
+M: Haavard Skinnemoen <hskinnemoen@atmel.com>
S: Supported
F: arch/avr32/mach-at32ap/
AX.25 NETWORK LAYER
-P: Ralf Baechle
-M: ralf@linux-mips.org
+M: Ralf Baechle <ralf@linux-mips.org>
L: linux-hams@vger.kernel.org
W: http://www.linux-ax25.org/
S: Maintained
F: net/ax25/
B43 WIRELESS DRIVER
-P: Michael Buesch
-M: mb@bu3sch.de
-P: Stefano Brivio
-M: stefano.brivio@polimi.it
+M: Michael Buesch <mb@bu3sch.de>
+M: Stefano Brivio <stefano.brivio@polimi.it>
L: linux-wireless@vger.kernel.org
W: http://linuxwireless.org/en/users/Drivers/b43
S: Maintained
F: drivers/net/wireless/b43/
B43LEGACY WIRELESS DRIVER
-P: Larry Finger
-M: Larry.Finger@lwfinger.net
-P: Stefano Brivio
-M: stefano.brivio@polimi.it
+M: Larry Finger <Larry.Finger@lwfinger.net>
+M: Stefano Brivio <stefano.brivio@polimi.it>
L: linux-wireless@vger.kernel.org
W: http://linuxwireless.org/en/users/Drivers/b43
S: Maintained
F: drivers/net/wireless/b43legacy/
BACKLIGHT CLASS/SUBSYSTEM
-P: Richard Purdie
-M: rpurdie@rpsys.net
+M: Richard Purdie <rpurdie@rpsys.net>
S: Maintained
F: drivers/video/backlight/
F: include/linux/backlight.h
BAYCOM/HDLCDRV DRIVERS FOR AX.25
-P: Thomas Sailer
-M: t.sailer@alumni.ethz.ch
+M: Thomas Sailer <t.sailer@alumni.ethz.ch>
L: linux-hams@vger.kernel.org
W: http://www.baycom.org/~tom/ham/ham.html
S: Maintained
F: drivers/net/hamradio/baycom*
BEFS FILE SYSTEM
-P: Sergey S. Kostyliov
-M: rathamahata@php4.ru
+M: "Sergey S. Kostyliov" <rathamahata@php4.ru>
S: Maintained
F: Documentation/filesystems/befs.txt
F: fs/befs/
BFS FILE SYSTEM
-P: Tigran A. Aivazian
-M: tigran@aivazian.fsnet.co.uk
+M: "Tigran A. Aivazian" <tigran@aivazian.fsnet.co.uk>
S: Maintained
F: Documentation/filesystems/bfs.txt
F: fs/bfs/
F: include/linux/bfs_fs.h
BLACKFIN ARCHITECTURE
-P: Mike Frysinger
-M: vapier@gentoo.org
+M: Mike Frysinger <vapier@gentoo.org>
L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
F: arch/blackfin/
BLACKFIN EMAC DRIVER
-P: Michael Hennerich
-M: michael.hennerich@analog.com
+M: Michael Hennerich <michael.hennerich@analog.com>
L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
F: drivers/net/bfin_mac.*
BLACKFIN RTC DRIVER
-P: Mike Frysinger
-M: vapier.adi@gmail.com
+M: Mike Frysinger <vapier.adi@gmail.com>
L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
F: drivers/rtc/rtc-bfin.c
BLACKFIN SERIAL DRIVER
-P: Sonic Zhang
-M: sonic.zhang@analog.com
+M: Sonic Zhang <sonic.zhang@analog.com>
L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
F: drivers/serial/bfin_5xx.c
BLACKFIN WATCHDOG DRIVER
-P: Mike Frysinger
-M: vapier.adi@gmail.com
+M: Mike Frysinger <vapier.adi@gmail.com>
L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
F: drivers/watchdog/bfin_wdt.c
BLACKFIN I2C TWI DRIVER
-P: Sonic Zhang
-M: sonic.zhang@analog.com
+M: Sonic Zhang <sonic.zhang@analog.com>
L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org/
S: Supported
F: drivers/i2c/busses/i2c-bfin-twi.c
BLOCK LAYER
-P: Jens Axboe
-M: axboe@kernel.dk
+M: Jens Axboe <axboe@kernel.dk>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git
S: Maintained
F: block/
BLOCK2MTD DRIVER
-P: Joern Engel
-M: joern@lazybastard.org
+M: Joern Engel <joern@lazybastard.org>
L: linux-mtd@lists.infradead.org
S: Maintained
F: drivers/mtd/devices/block2mtd.c
BLUETOOTH DRIVERS
-P: Marcel Holtmann
-M: marcel@holtmann.org
+M: Marcel Holtmann <marcel@holtmann.org>
L: linux-bluetooth@vger.kernel.org
W: http://www.bluez.org/
S: Maintained
F: drivers/bluetooth/
BLUETOOTH SUBSYSTEM
-P: Marcel Holtmann
-M: marcel@holtmann.org
+M: Marcel Holtmann <marcel@holtmann.org>
L: linux-bluetooth@vger.kernel.org
W: http://www.bluez.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6.git
F: include/net/bluetooth/
BONDING DRIVER
-P: Jay Vosburgh
-M: fubar@us.ibm.com
+M: Jay Vosburgh <fubar@us.ibm.com>
L: bonding-devel@lists.sourceforge.net
W: http://sourceforge.net/projects/bonding/
S: Supported
F: include/linux/if_bonding.h
BROADCOM B44 10/100 ETHERNET DRIVER
-P: Gary Zambrano
-M: zambrano@broadcom.com
+M: Gary Zambrano <zambrano@broadcom.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/b44.*
BROADCOM BNX2 GIGABIT ETHERNET DRIVER
-P: Michael Chan
-M: mchan@broadcom.com
+M: Michael Chan <mchan@broadcom.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/bnx2.*
F: drivers/net/bnx2_*
BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER
-P: Eilon Greenstein
-M: eilong@broadcom.com
+M: Eilon Greenstein <eilong@broadcom.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/bnx2x*
BROADCOM TG3 GIGABIT ETHERNET DRIVER
-P: Matt Carlson
-M: mcarlson@broadcom.com
-P: Michael Chan
-M: mchan@broadcom.com
+M: Matt Carlson <mcarlson@broadcom.com>
+M: Michael Chan <mchan@broadcom.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/tg3.*
BSG (block layer generic sg v4 driver)
-P: FUJITA Tomonori
-M: fujita.tomonori@lab.ntt.co.jp
+M: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
L: linux-scsi@vger.kernel.org
S: Supported
F: block/bsg.c
F: include/linux/bsg.h
BT8XXGPIO DRIVER
-P: Michael Buesch
-M: mb@bu3sch.de
+M: Michael Buesch <mb@bu3sch.de>
W: http://bu3sch.de/btgpio.php
S: Maintained
F: drivers/gpio/bt8xxgpio.c
BTRFS FILE SYSTEM
-P: Chris Mason
-M: chris.mason@oracle.com
+M: Chris Mason <chris.mason@oracle.com>
L: linux-btrfs@vger.kernel.org
W: http://btrfs.wiki.kernel.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable.git
F: fs/btrfs/
BTTV VIDEO4LINUX DRIVER
-P: Mauro Carvalho Chehab
-M: mchehab@infradead.org
+M: Mauro Carvalho Chehab <mchehab@infradead.org>
L: linux-media@vger.kernel.org
W: http://linuxtv.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
F: drivers/media/video/bt8xx/bttv*
CACHEFILES: FS-CACHE BACKEND FOR CACHING ON MOUNTED FILESYSTEMS
-P: David Howells
-M: dhowells@redhat.com
+M: David Howells <dhowells@redhat.com>
L: linux-cachefs@redhat.com
S: Supported
F: Documentation/filesystems/caching/cachefiles.txt
F: fs/cachefiles/
CAFE CMOS INTEGRATED CAMERA CONTROLLER DRIVER
-P: Jonathan Corbet
-M: corbet@lwn.net
+M: Jonathan Corbet <corbet@lwn.net>
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
F: drivers/media/video/cafe_ccic*
CALGARY x86-64 IOMMU
-P: Muli Ben-Yehuda
-M: muli@il.ibm.com
-P: Jon D. Mason
-M: jdmason@kudzu.us
+M: Muli Ben-Yehuda <muli@il.ibm.com>
+M: "Jon D. Mason" <jdmason@kudzu.us>
L: discuss@x86-64.org
S: Maintained
F: arch/x86/kernel/pci-calgary_64.c
F: arch/x86/include/asm/tce.h
CAN NETWORK LAYER
-P: Urs Thuermann
-M: urs.thuermann@volkswagen.de
-P: Oliver Hartkopp
-M: oliver.hartkopp@volkswagen.de
+M: Urs Thuermann <urs.thuermann@volkswagen.de>
+M: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
L: socketcan-core@lists.berlios.de (subscribers-only)
W: http://developer.berlios.de/projects/socketcan/
S: Maintained
F: include/linux/can.h
CAN NETWORK DRIVERS
-P: Wolfgang Grandegger
-M: wg@grandegger.com
+M: Wolfgang Grandegger <wg@grandegger.com>
L: socketcan-core@lists.berlios.de (subscribers-only)
W: http://developer.berlios.de/projects/socketcan/
S: Maintained
CELL BROADBAND ENGINE ARCHITECTURE
-P: Arnd Bergmann
-M: arnd@arndb.de
+M: Arnd Bergmann <arnd@arndb.de>
L: linuxppc-dev@ozlabs.org
L: cbe-oss-dev@ozlabs.org
W: http://www.ibm.com/developerworks/power/cell/
F: arch/powerpc/platforms/cell/
CERTIFIED WIRELESS USB (WUSB) SUBSYSTEM:
-P: David Vrabel
-M: david.vrabel@csr.com
+M: David Vrabel <david.vrabel@csr.com>
L: linux-usb@vger.kernel.org
S: Supported
F: Documentation/usb/WUSB-Design-overview.txt
F: include/linux/usb/wusb*
CFAG12864B LCD DRIVER
-P: Miguel Ojeda Sandonis
-M: miguel.ojeda.sandonis@gmail.com
+M: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>
W: http://miguelojeda.es/auxdisplay.htm
W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
S: Maintained
F: include/linux/cfag12864b.h
CFAG12864BFB LCD FRAMEBUFFER DRIVER
-P: Miguel Ojeda Sandonis
-M: miguel.ojeda.sandonis@gmail.com
+M: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>
W: http://miguelojeda.es/auxdisplay.htm
W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
S: Maintained
F: include/linux/cfag12864b.h
CFG80211 and NL80211
-P: Johannes Berg
-M: johannes@sipsolutions.net
+M: Johannes Berg <johannes@sipsolutions.net>
L: linux-wireless@vger.kernel.org
S: Maintained
F: include/linux/nl80211.h
X: net/wireless/wext*
CHECKPATCH
-P: Andy Whitcroft
-M: apw@canonical.com
+M: Andy Whitcroft <apw@canonical.com>
S: Supported
F: scripts/checkpatch.pl
CISCO 10G ETHERNET DRIVER
-P: Scott Feldman
-M: scofeldm@cisco.com
-P: Joe Eykholt
-M: jeykholt@cisco.com
+M: Scott Feldman <scofeldm@cisco.com>
+M: Joe Eykholt <jeykholt@cisco.com>
S: Supported
F: drivers/net/enic/
CIRRUS LOGIC EP93XX ETHERNET DRIVER
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
+M: Lennert Buytenhek <kernel@wantstofly.org>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/arm/ep93xx_eth.c
CIRRUS LOGIC EP93XX OHCI USB HOST DRIVER
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
+M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/host/ohci-ep93xx.c
CIRRUS LOGIC CS4270 SOUND DRIVER
-P: Timur Tabi
-M: timur@freescale.com
+M: Timur Tabi <timur@freescale.com>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Supported
F: sound/soc/codecs/cs4270*
-CIRRUS LOGIC CS4280/CS461x SOUNDDRIVER
-P: Cirrus Logic Corporation (kernel 2.2 driver)
-M: Cirrus Logic Corporation, Thomas Woller <twoller@crystal.cirrus.com>
-P: Nils Faerber (port to kernel 2.4)
-M: Nils Faerber <nils@kernelconcepts.de>
-S: Maintained
-F: Documentation/input/cs461x.txt
-F: sound/pci/cs46xx/
-
CLK API
-P: Russell King
-M: linux@arm.linux.org.uk
+M: Russell King <linux@arm.linux.org.uk>
F: include/linux/clk.h
CISCO FCOE HBA DRIVER
-P: Abhijeet Joglekar
-M: abjoglek@cisco.com
-P: Joe Eykholt
-M: jeykholt@cisco.com
+M: Abhijeet Joglekar <abjoglek@cisco.com>
+M: Joe Eykholt <jeykholt@cisco.com>
L: linux-scsi@vger.kernel.org
S: Supported
F: drivers/scsi/fnic/
CODA FILE SYSTEM
-P: Jan Harkes
-M: jaharkes@cs.cmu.edu
+M: Jan Harkes <jaharkes@cs.cmu.edu>
M: coda@cs.cmu.edu
L: codalist@coda.cs.cmu.edu
W: http://www.coda.cs.cmu.edu/
F: include/linux/coda*.h
COMMON INTERNET FILE SYSTEM (CIFS)
-P: Steve French
-M: sfrench@samba.org
+M: Steve French <sfrench@samba.org>
L: linux-cifs-client@lists.samba.org
L: samba-technical@lists.samba.org
W: http://linux-cifs.samba.org/
F: fs/cifs/
COMPACTPCI HOTPLUG CORE
-P: Scott Murray
-M: scottm@somanetworks.com
-M: scott@spiteful.org
+M: Scott Murray <scott@spiteful.org>
L: linux-pci@vger.kernel.org
-S: Supported
+S: Maintained
F: drivers/pci/hotplug/cpci_hotplug*
COMPACTPCI HOTPLUG ZIATECH ZT5550 DRIVER
-P: Scott Murray
-M: scottm@somanetworks.com
-M: scott@spiteful.org
+M: Scott Murray <scott@spiteful.org>
L: linux-pci@vger.kernel.org
-S: Supported
+S: Maintained
F: drivers/pci/hotplug/cpcihp_zt5550.*
COMPACTPCI HOTPLUG GENERIC DRIVER
-P: Scott Murray
-M: scottm@somanetworks.com
-M: scott@spiteful.org
+M: Scott Murray <scott@spiteful.org>
L: linux-pci@vger.kernel.org
-S: Supported
+S: Maintained
F: drivers/pci/hotplug/cpcihp_generic.c
COMPAL LAPTOP SUPPORT
-P: Cezary Jackiewicz
-M: cezary.jackiewicz@gmail.com
+M: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
S: Maintained
F: drivers/platform/x86/compal-laptop.c
COMPUTONE INTELLIPORT MULTIPORT CARD
-P: Michael H. Warfield
-M: mhw@wittsend.com
+M: "Michael H. Warfield" <mhw@wittsend.com>
W: http://www.wittsend.com/computone.html
S: Maintained
F: Documentation/serial/computone.txt
F: drivers/char/ip2/
CONEXANT ACCESSRUNNER USB DRIVER
-P: Simon Arlott
-M: cxacru@fire.lp0.eu
+M: Simon Arlott <cxacru@fire.lp0.eu>
L: accessrunner-general@lists.sourceforge.net
W: http://accessrunner.sourceforge.net/
S: Maintained
F: drivers/usb/atm/cxacru.c
CONFIGFS
-P: Joel Becker
-M: joel.becker@oracle.com
+M: Joel Becker <joel.becker@oracle.com>
S: Supported
F: fs/configfs/
F: include/linux/configfs.h
+CONNECTOR
+M: Evgeniy Polyakov <zbr@ioremap.net>
+L: netdev@vger.kernel.org
+S: Maintained
+F: drivers/connector/
+
CONTROL GROUPS (CGROUPS)
-P: Paul Menage
-M: menage@google.com
-P: Li Zefan
-M: lizf@cn.fujitsu.com
+M: Paul Menage <menage@google.com>
+M: Li Zefan <lizf@cn.fujitsu.com>
L: containers@lists.linux-foundation.org
S: Maintained
F: include/linux/cgroup*
F: mm/*cgroup*
CORETEMP HARDWARE MONITORING DRIVER
-P: Rudolf Marek
-M: r.marek@assembler.cz
+M: Rudolf Marek <r.marek@assembler.cz>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/coretemp
F: drivers/hwmon/coretemp.c
COSA/SRP SYNC SERIAL DRIVER
-P: Jan "Yenya" Kasprzak
-M: kas@fi.muni.cz
+M: Jan "Yenya" Kasprzak <kas@fi.muni.cz>
W: http://www.fi.muni.cz/~kas/cosa/
S: Maintained
F: drivers/net/wan/cosa*
CPMAC ETHERNET DRIVER
-P: Florian Fainelli
-M: florian@openwrt.org
+M: Florian Fainelli <florian@openwrt.org>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/cpmac.c
CPU FREQUENCY DRIVERS
-P: Dave Jones
-M: davej@redhat.com
+M: Dave Jones <davej@redhat.com>
L: cpufreq@vger.kernel.org
W: http://www.codemonkey.org.uk/projects/cpufreq/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq.git
F: include/linux/cpufreq.h
CPUID/MSR DRIVER
-P: H. Peter Anvin
-M: hpa@zytor.com
+M: "H. Peter Anvin" <hpa@zytor.com>
S: Maintained
F: arch/x86/kernel/cpuid.c
F: arch/x86/kernel/msr.c
CPUSETS
-P: Paul Menage
-M: menage@google.com
+M: Paul Menage <menage@google.com>
W: http://www.bullopensource.org/cpuset/
W: http://oss.sgi.com/projects/cpusets/
S: Supported
F: fs/cramfs/
CRIS PORT
-P: Mikael Starvik
-M: starvik@axis.com
-P: Jesper Nilsson
-M: jesper.nilsson@axis.com
+M: Mikael Starvik <starvik@axis.com>
+M: Jesper Nilsson <jesper.nilsson@axis.com>
L: linux-cris-kernel@axis.com
W: http://developer.axis.com
S: Maintained
F: arch/cris/
CRYPTO API
-P: Herbert Xu
-M: herbert@gondor.apana.org.au
-P: David S. Miller
-M: davem@davemloft.net
+M: Herbert Xu <herbert@gondor.apana.org.au>
+M: "David S. Miller" <davem@davemloft.net>
L: linux-crypto@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6.git
S: Maintained
F: include/crypto/
CRYPTOGRAPHIC RANDOM NUMBER GENERATOR
-P: Neil Horman
-M: nhorman@tuxdriver.com
+M: Neil Horman <nhorman@tuxdriver.com>
L: linux-crypto@vger.kernel.org
S: Maintained
CS5535 Audio ALSA driver
-P: Jaya Kumar
-M: jayakumar.alsa@gmail.com
+M: Jaya Kumar <jayakumar.alsa@gmail.com>
S: Maintained
F: sound/pci/cs5535audio/
CX18 VIDEO4LINUX DRIVER
-P: Hans Verkuil
-M: hverkuil@xs4all.nl
-P: Andy Walls
-M: awalls@radix.net
+M: Hans Verkuil <hverkuil@xs4all.nl>
+M: Andy Walls <awalls@radix.net>
L: ivtv-devel@ivtvdriver.org
-L: ivtv-users@ivtvdriver.org
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
W: http://linuxtv.org
+W: http://www.ivtvdriver.org/index.php/Cx18
S: Maintained
F: Documentation/video4linux/cx18.txt
F: drivers/media/video/cx18/
CXGB3 ETHERNET DRIVER (CXGB3)
-P: Divy Le Ray
-M: divy@chelsio.com
+M: Divy Le Ray <divy@chelsio.com>
L: netdev@vger.kernel.org
W: http://www.chelsio.com
S: Supported
F: drivers/net/cxgb3/
CXGB3 IWARP RNIC DRIVER (IW_CXGB3)
-P: Steve Wise
-M: swise@chelsio.com
-L: general@lists.openfabrics.org
+M: Steve Wise <swise@chelsio.com>
+L: linux-rdma@vger.kernel.org
W: http://www.openfabrics.org
S: Supported
F: drivers/infiniband/hw/cxgb3/
CYBERPRO FB DRIVER
-P: Russell King
-M: linux@arm.linux.org.uk
+M: Russell King <linux@arm.linux.org.uk>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.arm.linux.org.uk/
S: Maintained
F: drivers/video/cyber2000fb.*
CYCLADES 2X SYNC CARD DRIVER
-P: Arnaldo Carvalho de Melo
-M: acme@ghostprotocols.net
+M: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
W: http://oops.ghostprotocols.net:81/blog
S: Maintained
F: drivers/net/wan/cycx*
F: drivers/net/wan/pc300*
DAMA SLAVE for AX.25
-P: Joerg Reuter
-M: jreuter@yaina.de
+M: Joerg Reuter <jreuter@yaina.de>
W: http://yaina.de/jreuter/
W: http://www.qsl.net/dl1bke/
L: linux-hams@vger.kernel.org
F: net/ax25/sysctl_net_ax25.c
DAVICOM FAST ETHERNET (DMFE) NETWORK DRIVER
-P: Tobias Ringstrom
-M: tori@unhappy.mine.nu
+M: Tobias Ringstrom <tori@unhappy.mine.nu>
L: netdev@vger.kernel.org
S: Maintained
F: Documentation/networking/dmfe.txt
F: drivers/net/tulip/dmfe.c
DC390/AM53C974 SCSI driver
-P: Kurt Garloff
-M: garloff@suse.de
+M: Kurt Garloff <garloff@suse.de>
W: http://www.garloff.de/kurt/linux/dc390/
-P: Guennadi Liakhovetski
-M: g.liakhovetski@gmx.de
+M: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
S: Maintained
F: drivers/scsi/tmscsim.*
DC395x SCSI driver
-P: Oliver Neukum
-M: oliver@neukum.name
-P: Ali Akcaagac
-M: aliakc@web.de
-P: Jamie Lenehan
-M: lenehan@twibble.org
+M: Oliver Neukum <oliver@neukum.name>
+M: Ali Akcaagac <aliakc@web.de>
+M: Jamie Lenehan <lenehan@twibble.org>
W: http://twibble.org/dist/dc395x/
L: dc395x@twibble.org
L: http://lists.twibble.org/mailman/listinfo/dc395x/
F: drivers/scsi/dc395x.*
DCCP PROTOCOL
-P: Arnaldo Carvalho de Melo
-M: acme@ghostprotocols.net
+M: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
L: dccp@vger.kernel.org
W: http://linux-net.osdl.org/index.php/DCCP
S: Maintained
F: net/dccp/
DECnet NETWORK LAYER
-P: Christine Caulfield
-M: christine.caulfield@googlemail.com
+M: Christine Caulfield <christine.caulfield@googlemail.com>
W: http://linux-decnet.sourceforge.net
L: linux-decnet-user@lists.sourceforge.net
S: Maintained
F: net/decnet/
DEFXX FDDI NETWORK DRIVER
-P: Maciej W. Rozycki
-M: macro@linux-mips.org
+M: "Maciej W. Rozycki" <macro@linux-mips.org>
S: Maintained
F: drivers/net/defxx.*
DELL LAPTOP DRIVER
-P: Matthew Garrett
-M: mjg59@srcf.ucam.org
+M: Matthew Garrett <mjg59@srcf.ucam.org>
S: Maintained
F: drivers/platform/x86/dell-laptop.c
DELL LAPTOP SMM DRIVER
-P: Massimo Dal Zotto
-M: dz@debian.org
+M: Massimo Dal Zotto <dz@debian.org>
W: http://www.debian.org/~dz/i8k/
S: Maintained
F: drivers/char/i8k.c
F: include/linux/i8k.h
DELL SYSTEMS MANAGEMENT BASE DRIVER (dcdbas)
-P: Doug Warzecha
-M: Douglas_Warzecha@dell.com
+M: Doug Warzecha <Douglas_Warzecha@dell.com>
S: Maintained
F: Documentation/dcdbas.txt
F: drivers/firmware/dcdbas.*
DELL WMI EXTRAS DRIVER
-P: Matthew Garrett
-M: mjg59@srcf.ucam.org
+M: Matthew Garrett <mjg59@srcf.ucam.org>
S: Maintained
DEVICE NUMBER REGISTRY
-P: Torben Mathiasen
-M: device@lanana.org
+M: Torben Mathiasen <device@lanana.org>
W: http://lanana.org/docs/device-list/index.html
S: Maintained
F: include/linux/dm-*.h
DIGI INTL. EPCA DRIVER
-P: Digi International, Inc
-M: Eng.Linux@digi.com
+M: "Digi International, Inc" <Eng.Linux@digi.com>
L: Eng.Linux@digi.com
W: http://www.digi.com
S: Orphan
F: drivers/char/digi*
DIRECTORY NOTIFICATION (DNOTIFY)
-P: Eric Paris
-M: eparis@parisplace.org
+M: Eric Paris <eparis@parisplace.org>
S: Maintained
F: Documentation/filesystems/dnotify.txt
F: fs/notify/dnotify/
F: include/linux/dnotify.h
DISK GEOMETRY AND PARTITION HANDLING
-P: Andries Brouwer
-M: aeb@cwi.nl
+M: Andries Brouwer <aeb@cwi.nl>
W: http://www.win.tue.nl/~aeb/linux/Large-Disk.html
W: http://www.win.tue.nl/~aeb/linux/zip/zip-1.html
W: http://www.win.tue.nl/~aeb/partitions/partition_types-1.html
S: Maintained
DISKQUOTA
-P: Jan Kara
-M: jack@suse.cz
+M: Jan Kara <jack@suse.cz>
S: Maintained
F: Documentation/filesystems/quota.txt
F: fs/quota/
F: include/linux/quota*.h
DISTRIBUTED LOCK MANAGER (DLM)
-P: Christine Caulfield
-M: ccaulfie@redhat.com
-P: David Teigland
-M: teigland@redhat.com
+M: Christine Caulfield <ccaulfie@redhat.com>
+M: David Teigland <teigland@redhat.com>
L: cluster-devel@redhat.com
W: http://sources.redhat.com/cluster/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm.git
F: fs/dlm/
DMA GENERIC OFFLOAD ENGINE SUBSYSTEM
-P: Maciej Sosnowski
-M: maciej.sosnowski@intel.com
-P: Dan Williams
-M: dan.j.williams@intel.com
+M: Maciej Sosnowski <maciej.sosnowski@intel.com>
+M: Dan Williams <dan.j.williams@intel.com>
S: Supported
F: drivers/dma/
F: include/linux/dma*
DME1737 HARDWARE MONITOR DRIVER
-P: Juerg Haefliger
-M: juergh@gmail.com
+M: Juerg Haefliger <juergh@gmail.com>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/dme1737
F: drivers/hwmon/dme1737.c
DOCBOOK FOR DOCUMENTATION
-P: Randy Dunlap
-M: rdunlap@xenotime.net
+M: Randy Dunlap <rdunlap@xenotime.net>
S: Maintained
DOCKING STATION DRIVER
-P: Shaohua Li
-M: shaohua.li@intel.com
+M: Shaohua Li <shaohua.li@intel.com>
L: linux-acpi@vger.kernel.org
S: Supported
F: drivers/acpi/dock.c
DOCUMENTATION
-P: Randy Dunlap
-M: rdunlap@xenotime.net
+M: Randy Dunlap <rdunlap@xenotime.net>
L: linux-doc@vger.kernel.org
S: Maintained
F: Documentation/
DOUBLETALK DRIVER
-P: James R. Van Zandt
-M: jrv@vanzandt.mv.com
+M: "James R. Van Zandt" <jrv@vanzandt.mv.com>
L: blinux-list@redhat.com
S: Maintained
F: drivers/char/dtlk.c
F: include/linux/dtlk.h
DPT_I2O SCSI RAID DRIVER
-P: Adaptec OEM Raid Solutions
-M: aacraid@adaptec.com
+M: Adaptec OEM Raid Solutions <aacraid@adaptec.com>
L: linux-scsi@vger.kernel.org
W: http://www.adaptec.com/
S: Maintained
F: drivers/scsi/dpt/
DRIVER CORE, KOBJECTS, AND SYSFS
-P: Greg Kroah-Hartman
-M: gregkh@suse.de
+M: Greg Kroah-Hartman <gregkh@suse.de>
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
S: Supported
F: Documentation/kobject.txt
F: lib/kobj*
DRM DRIVERS
-P: David Airlie
-M: airlied@linux.ie
+M: David Airlie <airlied@linux.ie>
L: dri-devel@lists.sourceforge.net
T: git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git
S: Maintained
F: drivers/gpu/drm/
DSCC4 DRIVER
-P: Francois Romieu
-M: romieu@fr.zoreil.com
+M: Francois Romieu <romieu@fr.zoreil.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/wan/dscc4.c
DZ DECSTATION DZ11 SERIAL DRIVER
-P: Maciej W. Rozycki
-M: macro@linux-mips.org
+M: "Maciej W. Rozycki" <macro@linux-mips.org>
S: Maintained
F: drivers/serial/dz.*
EATA-DMA SCSI DRIVER
-P: Michael Neuffer
-M: mike@i-Connect.Net
+M: Michael Neuffer <mike@i-Connect.Net>
L: linux-eata@i-connect.net
L: linux-scsi@vger.kernel.org
S: Maintained
F: drivers/scsi/eata*
EATA ISA/EISA/PCI SCSI DRIVER
-P: Dario Ballabio
-M: ballabio_dario@emc.com
+M: Dario Ballabio <ballabio_dario@emc.com>
L: linux-scsi@vger.kernel.org
S: Maintained
F: drivers/scsi/eata.c
EATA-PIO SCSI DRIVER
-P: Michael Neuffer
-M: mike@i-Connect.Net
+M: Michael Neuffer <mike@i-Connect.Net>
L: linux-eata@i-connect.net
L: linux-scsi@vger.kernel.org
S: Maintained
F: drivers/scsi/eata_pio.*
EBTABLES
-P: Bart De Schuymer
-M: bart.de.schuymer@pandora.be
+M: Bart De Schuymer <bart.de.schuymer@pandora.be>
L: ebtables-user@lists.sourceforge.net
L: ebtables-devel@lists.sourceforge.net
W: http://ebtables.sourceforge.net/
F: net/bridge/netfilter/ebt*.c
ECRYPT FILE SYSTEM
-P: Tyler Hicks
-M: tyhicks@linux.vnet.ibm.com
-P: Dustin Kirkland
-M: kirkland@canonical.com
+M: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
+M: Dustin Kirkland <kirkland@canonical.com>
L: ecryptfs-devel@lists.launchpad.net
W: https://launchpad.net/ecryptfs
S: Supported
F: fs/ecryptfs/
EDAC-CORE
-P: Doug Thompson
-M: dougthompson@xmission.com
+M: Doug Thompson <dougthompson@xmission.com>
L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Supported
F: include/linux/edac.h
EDAC-AMD64
-P: Doug Thompson
-M: dougthompson@xmission.com
-P: Borislav Petkov
-M: borislav.petkov@amd.com
+M: Doug Thompson <dougthompson@xmission.com>
+M: Borislav Petkov <borislav.petkov@amd.com>
L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Supported
F: drivers/edac/amd64_edac*
EDAC-E752X
-P: Mark Gross
-M: mark.gross@intel.com
-P: Doug Thompson
-M: dougthompson@xmission.com
+M: Mark Gross <mark.gross@intel.com>
+M: Doug Thompson <dougthompson@xmission.com>
L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/e752x_edac.c
EDAC-E7XXX
-P: Doug Thompson
-M: dougthompson@xmission.com
+M: Doug Thompson <dougthompson@xmission.com>
L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/e7xxx_edac.c
EDAC-I82443BXGX
-P: Tim Small
-M: tim@buttersideup.com
+M: Tim Small <tim@buttersideup.com>
L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/i82443bxgx_edac.c
EDAC-I3000
-P: Jason Uhlenkott
-M: juhlenko@akamai.com
+M: Jason Uhlenkott <juhlenko@akamai.com>
L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/i3000_edac.c
EDAC-I5000
-P: Doug Thompson
-M: dougthompson@xmission.com
+M: Doug Thompson <dougthompson@xmission.com>
L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/i5000_edac.c
EDAC-I5400
-P: Mauro Carvalho Chehab
-M: mchehab@redhat.com
+M: Mauro Carvalho Chehab <mchehab@redhat.com>
L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/i5400_edac.c
EDAC-I82975X
-P: Ranganathan Desikan
-M: ravi@jetztechnologies.com
-P: Arvind R.
-M: arvind@jetztechnologies.com
+M: Ranganathan Desikan <ravi@jetztechnologies.com>
+M: "Arvind R." <arvind@jetztechnologies.com>
L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/i82975x_edac.c
EDAC-PASEMI
-P: Egor Martovetsky
-M: egor@pasemi.com
+M: Egor Martovetsky <egor@pasemi.com>
L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/pasemi_edac.c
EDAC-R82600
-P: Tim Small
-M: tim@buttersideup.com
+M: Tim Small <tim@buttersideup.com>
L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/r82600_edac.c
EEEPC LAPTOP EXTRAS DRIVER
-P: Corentin Chary
-M: corentincj@iksaif.net
+M: Corentin Chary <corentincj@iksaif.net>
L: acpi4asus-user@lists.sourceforge.net
W: http://acpi4asus.sf.net
S: Maintained
F: fs/efs/
EHCA (IBM GX bus InfiniBand adapter) DRIVER
-P: Hoang-Nam Nguyen
-M: hnguyen@de.ibm.com
-P: Christoph Raisch
-M: raisch@de.ibm.com
-L: general@lists.openfabrics.org
+M: Hoang-Nam Nguyen <hnguyen@de.ibm.com>
+M: Christoph Raisch <raisch@de.ibm.com>
+L: linux-rdma@vger.kernel.org
S: Supported
F: drivers/infiniband/hw/ehca/
EMBEDDED LINUX
-P: Paul Gortmaker
-M: paul.gortmaker@windriver.com
-P: Matt Mackall
-M: mpm@selenic.com
-P: David Woodhouse
-M: dwmw2@infradead.org
+M: Paul Gortmaker <paul.gortmaker@windriver.com>
+M: Matt Mackall <mpm@selenic.com>
+M: David Woodhouse <dwmw2@infradead.org>
L: linux-embedded@vger.kernel.org
S: Maintained
EMULEX LPFC FC SCSI DRIVER
-P: James Smart
-M: james.smart@emulex.com
+M: James Smart <james.smart@emulex.com>
L: linux-scsi@vger.kernel.org
W: http://sourceforge.net/projects/lpfcxxxx
S: Supported
F: drivers/scsi/lpfc/
ENE CB710 FLASH CARD READER DRIVER
-P: Michał Mirosław
-M: mirq-linux@rere.qmqm.pl
-L: linux-kernel@vger.kernel.org
+M: Michał Mirosław <mirq-linux@rere.qmqm.pl>
S: Maintained
F: drivers/misc/cb710/
F: drivers/mmc/host/cb710-mmc.*
F: include/linux/cb710.h
EPSON 1355 FRAMEBUFFER DRIVER
-P: Christopher Hoover
-M: ch@murgatroid.com
-P: Christopher Hoover
-M: ch@hpl.hp.com
+M: Christopher Hoover <ch@murgatroid.com>
+M: Christopher Hoover <ch@hpl.hp.com>
S: Maintained
F: drivers/video/epson1355fb.c
EPSON S1D13XXX FRAMEBUFFER DRIVER
-P: Kristoffer Ericson
-M: kristoffer.ericson@gmail.com
+M: Kristoffer Ericson <kristoffer.ericson@gmail.com>
S: Maintained
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/kristoffer/linux-hpc.git
F: drivers/video/s1d13xxxfb.c
F: include/video/s1d13xxxfb.h
ETHEREXPRESS-16 NETWORK DRIVER
-P: Philip Blundell
-M: philb@gnu.org
+M: Philip Blundell <philb@gnu.org>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/eexpress.*
ETHERNET BRIDGE
-P: Stephen Hemminger
-M: shemminger@linux-foundation.org
+M: Stephen Hemminger <shemminger@linux-foundation.org>
L: bridge@lists.linux-foundation.org
W: http://www.linux-foundation.org/en/Net:Bridge
S: Maintained
F: net/bridge/
ETHERTEAM 16I DRIVER
-P: Mika Kuoppala
-M: miku@iki.fi
+M: Mika Kuoppala <miku@iki.fi>
S: Maintained
F: drivers/net/eth16i.c
F: include/linux/ext2*
EXT3 FILE SYSTEM
-P: Stephen Tweedie
-M: sct@redhat.com
-P: Andrew Morton
-M: akpm@linux-foundation.org
-P: Andreas Dilger
-M: adilger@sun.com
+M: Stephen Tweedie <sct@redhat.com>
+M: Andrew Morton <akpm@linux-foundation.org>
+M: Andreas Dilger <adilger@sun.com>
L: linux-ext4@vger.kernel.org
S: Maintained
F: Documentation/filesystems/ext3.txt
F: include/linux/ext3*
EXT4 FILE SYSTEM
-P: Theodore Ts'o
-M: tytso@mit.edu
-P: Andreas Dilger
-M: adilger@sun.com
+M: "Theodore Ts'o" <tytso@mit.edu>
+M: Andreas Dilger <adilger@sun.com>
L: linux-ext4@vger.kernel.org
W: http://ext4.wiki.kernel.org
S: Maintained
F: fs/ext4/
F71805F HARDWARE MONITORING DRIVER
-P: Jean Delvare
-M: khali@linux-fr.org
+M: Jean Delvare <khali@linux-fr.org>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/f71805f
F: drivers/hwmon/f71805f.c
FARSYNC SYNCHRONOUS DRIVER
-P: Kevin Curtis
-M: kevin.curtis@farsite.co.uk
+M: Kevin Curtis <kevin.curtis@farsite.co.uk>
W: http://www.farsite.co.uk/
S: Supported
F: drivers/net/wan/farsync.*
FAULT INJECTION SUPPORT
-P: Akinobu Mita
-M: akinobu.mita@gmail.com
+M: Akinobu Mita <akinobu.mita@gmail.com>
S: Supported
F: Documentation/fault-injection/
F: lib/fault-inject.c
FILE LOCKING (flock() and fcntl()/lockf())
-P: Matthew Wilcox
-M: matthew@wil.cx
+M: Matthew Wilcox <matthew@wil.cx>
L: linux-fsdevel@vger.kernel.org
S: Maintained
F: include/linux/fcntl.h
F: fs/locks.c
FILESYSTEMS (VFS and infrastructure)
-P: Alexander Viro
-M: viro@zeniv.linux.org.uk
+M: Alexander Viro <viro@zeniv.linux.org.uk>
L: linux-fsdevel@vger.kernel.org
S: Maintained
F: fs/*
FINTEK F75375S HARDWARE MONITOR AND FAN CONTROLLER DRIVER
-P: Riku Voipio
-M: riku.vipio@iki.fi
+M: Riku Voipio <riku.vipio@iki.fi>
L: lm-sensors@lm-sensors.org
S: Maintained
F: drivers/hwmon/f75375s.c
F: include/linux/f75375s.h
FIREWIRE SUBSYSTEM
-P: Kristian Hoegsberg
-M: krh@redhat.com
-P: Stefan Richter
-M: stefanr@s5r6.in-berlin.de
+M: Kristian Hoegsberg <krh@redhat.com>
+M: Stefan Richter <stefanr@s5r6.in-berlin.de>
L: linux1394-devel@lists.sourceforge.net
W: http://www.linux1394.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git
F: include/linux/firmware.h
FPU EMULATOR
-P: Bill Metzenthen
-M: billm@melbpc.org.au
+M: Bill Metzenthen <billm@melbpc.org.au>
W: http://floatingpoint.sourceforge.net/emulator/index.html
S: Maintained
F: arch/x86/math-emu/
FRAME RELAY DLCI/FRAD (Sangoma drivers too)
-P: Mike McLagan
-M: mike.mclagan@linux.org
+M: Mike McLagan <mike.mclagan@linux.org>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/wan/dlci.c
F: include/linux/fb.h
FREESCALE DMA DRIVER
-P: Li Yang
-M: leoli@freescale.com
-P: Zhang Wei
-M: zw@zh-kernel.org
+M: Li Yang <leoli@freescale.com>
+M: Zhang Wei <zw@zh-kernel.org>
L: linuxppc-dev@ozlabs.org
S: Maintained
F: drivers/dma/fsldma.*
FREESCALE I2C CPM DRIVER
-P: Jochen Friedrich
-M: jochen@scram.de
+M: Jochen Friedrich <jochen@scram.de>
L: linuxppc-dev@ozlabs.org
L: linux-i2c@vger.kernel.org
S: Maintained
F: drivers/i2c/busses/i2c-cpm.c
FREESCALE IMX / MXC FRAMEBUFFER DRIVER
-P: Sascha Hauer
-M: kernel@pengutronix.de
+M: Sascha Hauer <kernel@pengutronix.de>
L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
F: drivers/video/imxfb.c
FREESCALE SOC FS_ENET DRIVER
-P: Pantelis Antoniou
-M: pantelis.antoniou@gmail.com
-P: Vitaly Bordug
-M: vbordug@ru.mvista.com
+M: Pantelis Antoniou <pantelis.antoniou@gmail.com>
+M: Vitaly Bordug <vbordug@ru.mvista.com>
L: linuxppc-dev@ozlabs.org
L: netdev@vger.kernel.org
S: Maintained
F: include/linux/fs_enet_pd.h
FREESCALE QUICC ENGINE LIBRARY
-P: Timur Tabi
-M: timur@freescale.com
+M: Timur Tabi <timur@freescale.com>
L: linuxppc-dev@ozlabs.org
S: Supported
F: arch/powerpc/sysdev/qe_lib/
F: arch/powerpc/include/asm/*qe.h
FREESCALE HIGHSPEED USB DEVICE DRIVER
-P: Li Yang
-M: leoli@freescale.com
+M: Li Yang <leoli@freescale.com>
L: linux-usb@vger.kernel.org
L: linuxppc-dev@ozlabs.org
S: Maintained
F: drivers/usb/gadget/fsl_usb2_udc.c
FREESCALE QUICC ENGINE UCC ETHERNET DRIVER
-P: Li Yang
-M: leoli@freescale.com
+M: Li Yang <leoli@freescale.com>
L: netdev@vger.kernel.org
L: linuxppc-dev@ozlabs.org
S: Maintained
F: drivers/net/ucc_geth*
FREESCALE QUICC ENGINE UCC UART DRIVER
-P: Timur Tabi
-M: timur@freescale.com
+M: Timur Tabi <timur@freescale.com>
L: linuxppc-dev@ozlabs.org
S: Supported
F: drivers/serial/ucc_uart.c
FREESCALE SOC SOUND DRIVERS
-P: Timur Tabi
-M: timur@freescale.com
+M: Timur Tabi <timur@freescale.com>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
L: linuxppc-dev@ozlabs.org
S: Supported
F: sound/soc/fsl/mpc8610_hpcd.c
FREEVXFS FILESYSTEM
-P: Christoph Hellwig
-M: hch@infradead.org
+M: Christoph Hellwig <hch@infradead.org>
W: ftp://ftp.openlinux.org/pub/people/hch/vxfs
S: Maintained
F: fs/freevxfs/
FREEZER
-P: Pavel Machek
-M: pavel@ucw.cz
-P: Rafael J. Wysocki
-M: rjw@sisk.pl
+M: Pavel Machek <pavel@ucw.cz>
+M: "Rafael J. Wysocki" <rjw@sisk.pl>
L: linux-pm@lists.linux-foundation.org
S: Supported
F: Documentation/power/freezing-of-tasks.txt
F: kernel/freezer.c
FS-CACHE: LOCAL CACHING FOR NETWORK FILESYSTEMS
-P: David Howells
-M: dhowells@redhat.com
+M: David Howells <dhowells@redhat.com>
L: linux-cachefs@redhat.com
S: Supported
F: Documentation/filesystems/caching/
F: include/linux/fscache*.h
FTRACE
-P: Steven Rostedt
-M: rostedt@goodmis.org
+M: Steven Rostedt <rostedt@goodmis.org>
S: Maintained
F: Documentation/trace/ftrace.txt
F: arch/*/*/*/ftrace.h
F: kernel/trace/
FUJITSU FR-V (FRV) PORT
-P: David Howells
-M: dhowells@redhat.com
+M: David Howells <dhowells@redhat.com>
S: Maintained
F: arch/frv/
FUJITSU LAPTOP EXTRAS
-P: Jonathan Woithe
-M: jwoithe@physics.adelaide.edu.au
+M: Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
L: linux-acpi@vger.kernel.org
S: Maintained
F: drivers/platform/x86/fujitsu-laptop.c
FUSE: FILESYSTEM IN USERSPACE
-P: Miklos Szeredi
-M: miklos@szeredi.hu
+M: Miklos Szeredi <miklos@szeredi.hu>
L: fuse-devel@lists.sourceforge.net
W: http://fuse.sourceforge.net/
S: Maintained
F: include/linux/fuse.h
FUTURE DOMAIN TMC-16x0 SCSI DRIVER (16-bit)
-P: Rik Faith
-M: faith@cs.unc.edu
+M: Rik Faith <faith@cs.unc.edu>
L: linux-scsi@vger.kernel.org
S: Odd Fixes (e.g., new signatures)
F: drivers/scsi/fdomain.*
GDT SCSI DISK ARRAY CONTROLLER DRIVER
-P: Achim Leubner
-M: achim_leubner@adaptec.com
+M: Achim Leubner <achim_leubner@adaptec.com>
L: linux-scsi@vger.kernel.org
W: http://www.icp-vortex.com/
S: Supported
F: drivers/scsi/gdt*
GENERIC GPIO I2C DRIVER
-P: Haavard Skinnemoen
-M: hskinnemoen@atmel.com
+M: Haavard Skinnemoen <hskinnemoen@atmel.com>
S: Supported
F: drivers/i2c/busses/i2c-gpio.c
F: include/linux/i2c-gpio.h
GENERIC HDLC (WAN) DRIVERS
-P: Krzysztof Halasa
-M: khc@pm.waw.pl
+M: Krzysztof Halasa <khc@pm.waw.pl>
W: http://www.kernel.org/pub/linux/utils/net/hdlc/
S: Maintained
F: drivers/net/wan/c101.c
F: drivers/net/wan/wanxl*
GENERIC INCLUDE/ASM HEADER FILES
-P: Arnd Bergmann
-M: arnd@arndb.de
+M: Arnd Bergmann <arnd@arndb.de>
L: linux-arch@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git
S: Maintained
F: include/asm-generic
GFS2 FILE SYSTEM
-P: Steven Whitehouse
-M: swhiteho@redhat.com
+M: Steven Whitehouse <swhiteho@redhat.com>
L: cluster-devel@redhat.com
W: http://sources.redhat.com/cluster/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes.git
F: include/linux/gfs2_ondisk.h
GIGASET ISDN DRIVERS
-P: Hansjoerg Lipp
-M: hjlipp@web.de
-P: Tilman Schmidt
-M: tilman@imap.cc
+M: Hansjoerg Lipp <hjlipp@web.de>
+M: Tilman Schmidt <tilman@imap.cc>
L: gigaset307x-common@lists.sourceforge.net
W: http://gigaset307x.sourceforge.net/
S: Maintained
F: include/linux/gigaset_dev.h
HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER
-P: Frank Seidel
-M: frank@f-seidel.de
+M: Frank Seidel <frank@f-seidel.de>
L: lm-sensors@lm-sensors.org
W: http://www.kernel.org/pub/linux/kernel/people/fseidel/hdaps/
S: Maintained
F: drivers/char/hvc_*
GSPCA FINEPIX SUBDRIVER
-P: Frank Zago
-M: frank@zago.net
+M: Frank Zago <frank@zago.net>
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
F: drivers/media/video/gspca/finepix.c
GSPCA M5602 SUBDRIVER
-P: Erik Andren
-M: erik.andren@gmail.com
+M: Erik Andren <erik.andren@gmail.com>
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
F: drivers/media/video/gspca/m5602/
GSPCA PAC207 SONIXB SUBDRIVER
-P: Hans de Goede
-M: hdegoede@redhat.com
+M: Hans de Goede <hdegoede@redhat.com>
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
F: drivers/media/video/gspca/pac207.c
+GSPCA SN9C20X SUBDRIVER
+M: Brian Johnson <brijohn@gmail.com>
+L: linux-media@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
+S: Maintained
+F: drivers/media/video/gspca/sn9c20x.c
+
GSPCA T613 SUBDRIVER
-P: Leandro Costantino
-M: lcostantino@gmail.com
+M: Leandro Costantino <lcostantino@gmail.com>
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
F: drivers/media/video/gspca/t613.c
GSPCA USB WEBCAM DRIVER
-P: Jean-Francois Moine
-M: moinejf@free.fr
+M: Jean-Francois Moine <moinejf@free.fr>
W: http://moinejf.free.fr
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
F: include/linux/hw_random.h
HARMONY SOUND DRIVER
-P: Kyle McMartin
-M: kyle@mcmartin.ca
+M: Kyle McMartin <kyle@mcmartin.ca>
L: linux-parisc@vger.kernel.org
S: Maintained
F: sound/parisc/harmony.*
HAYES ESP SERIAL DRIVER
-P: Andrew J. Robinson
-M: arobinso@nyx.net
+M: "Andrew J. Robinson" <arobinso@nyx.net>
W: http://www.nyx.net/~arobinso
S: Maintained
F: Documentation/serial/hayes-esp.txt
F: drivers/char/esp.c
HEWLETT-PACKARD SMART2 RAID DRIVER
-P: Chirag Kantharia
-M: chirag.kantharia@hp.com
+M: Chirag Kantharia <chirag.kantharia@hp.com>
L: iss_storagedev@hp.com
S: Maintained
F: Documentation/blockdev/cpqarray.txt
F: drivers/block/cpqarray.*
HEWLETT-PACKARD SMART CISS RAID DRIVER (cciss)
-P: Mike Miller
-M: mike.miller@hp.com
+M: Mike Miller <mike.miller@hp.com>
L: iss_storagedev@hp.com
S: Supported
F: Documentation/blockdev/cciss.txt
F: include/linux/cciss_ioctl.h
HFS FILESYSTEM
-P: Roman Zippel
-M: zippel@linux-m68k.org
+M: Roman Zippel <zippel@linux-m68k.org>
S: Maintained
F: Documentation/filesystems/hfs.txt
F: fs/hfs/
HGA FRAMEBUFFER DRIVER
-P: Ferenc Bakonyi
-M: fero@drama.obuda.kando.hu
+M: Ferenc Bakonyi <fero@drama.obuda.kando.hu>
L: linux-nvidia@lists.surfsouth.com
W: http://drama.obuda.kando.hu/~fero/cgi-bin/hgafb.shtml
S: Maintained
F: drivers/video/hgafb.c
HIBERNATION (aka Software Suspend, aka swsusp)
-P: Pavel Machek
-M: pavel@ucw.cz
-P: Rafael J. Wysocki
-M: rjw@sisk.pl
+M: Pavel Machek <pavel@ucw.cz>
+M: "Rafael J. Wysocki" <rjw@sisk.pl>
L: linux-pm@lists.linux-foundation.org
S: Supported
F: arch/x86/power/
F: arch/*/include/asm/suspend*.h
HID CORE LAYER
-P: Jiri Kosina
-M: jkosina@suse.cz
+M: Jiri Kosina <jkosina@suse.cz>
L: linux-input@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git
S: Maintained
F: include/linux/hid*
HIGH-RESOLUTION TIMERS, CLOCKEVENTS, DYNTICKS
-P: Thomas Gleixner
-M: tglx@linutronix.de
+M: Thomas Gleixner <tglx@linutronix.de>
S: Maintained
F: Documentation/timers/
F: kernel/hrtimer.c
F: include/linux/hrtimer.h
HIGH-SPEED SCC DRIVER FOR AX.25
-P: Klaus Kudielka
-M: klaus.kudielka@ieee.org
+M: Klaus Kudielka <klaus.kudielka@ieee.org>
L: linux-hams@vger.kernel.org
W: http://www.nt.tuwien.ac.at/~kkudielk/Linux/
S: Maintained
F: drivers/net/hamradio/scc.c
HIGHPOINT ROCKETRAID 3xxx RAID DRIVER
-P: HighPoint Linux Team
-M: linux@highpoint-tech.com
+M: HighPoint Linux Team <linux@highpoint-tech.com>
W: http://www.highpoint-tech.com
S: Supported
F: Documentation/scsi/hptiop.txt
F: drivers/scsi/hptiop.c
HIPPI
-P: Jes Sorensen
-M: jes@trained-monkey.org
+M: Jes Sorensen <jes@trained-monkey.org>
L: linux-hippi@sunsite.dk
S: Maintained
F: include/linux/hippidevice.h
F: net/802/hippi.c
HOST AP DRIVER
-P: Jouni Malinen
-M: j@w1.fi
+M: Jouni Malinen <j@w1.fi>
L: hostap@shmoo.com (subscribers-only)
L: linux-wireless@vger.kernel.org
W: http://hostap.epitest.fi/
F: drivers/net/wireless/hostap/
HP COMPAQ TC1100 TABLET WMI EXTRAS DRIVER
-P: Carlos Corbacho
-M: carlos@strangeworlds.co.uk
+M: Carlos Corbacho <carlos@strangeworlds.co.uk>
S: Odd Fixes
F: drivers/platform/x86/tc1100-wmi.c
HP100: Driver for HP 10/100 Mbit/s Voice Grade Network Adapter Series
-P: Jaroslav Kysela
-M: perex@perex.cz
+M: Jaroslav Kysela <perex@perex.cz>
S: Maintained
F: drivers/net/hp100.*
HPET: High Precision Event Timers driver
-P: Clemens Ladisch
-M: clemens@ladisch.de
+M: Clemens Ladisch <clemens@ladisch.de>
S: Maintained
F: Documentation/timers/hpet.txt
F: drivers/char/hpet.c
F: include/linux/hpet.h
HPET: i386
-P: Venkatesh Pallipadi (Venki)
-M: venkatesh.pallipadi@intel.com
+M: "Venkatesh Pallipadi (Venki)" <venkatesh.pallipadi@intel.com>
S: Maintained
F: arch/x86/kernel/hpet.c
F: arch/x86/include/asm/hpet.h
HPET: x86_64
-P: Vojtech Pavlik
-M: vojtech@suse.cz
+M: Vojtech Pavlik <vojtech@suse.cz>
S: Maintained
HPET: ACPI
-P: Bob Picco
-M: bob.picco@hp.com
+M: Bob Picco <bob.picco@hp.com>
S: Maintained
F: drivers/char/hpet.c
HPFS FILESYSTEM
-P: Mikulas Patocka
-M: mikulas@artax.karlin.mff.cuni.cz
+M: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
W: http://artax.karlin.mff.cuni.cz/~mikulas/vyplody/hpfs/index-e.cgi
S: Maintained
F: fs/hpfs/
HSO 3G MODEM DRIVER
-P: Jan Dumon
-M: j.dumon@option.com
+M: Jan Dumon <j.dumon@option.com>
W: http://www.pharscape.org
S: Maintained
F: drivers/net/usb/hso.c
HTCPEN TOUCHSCREEN DRIVER
-P: Pau Oliva Fora
-M: pof@eslack.org
+M: Pau Oliva Fora <pof@eslack.org>
L: linux-input@vger.kernel.org
S: Maintained
F: drivers/input/touchscreen/htcpen.c
HUGETLB FILESYSTEM
-P: William Irwin
-M: wli@holomorphy.com
+M: William Irwin <wli@holomorphy.com>
S: Maintained
F: fs/hugetlbfs/
I2C/SMBUS STUB DRIVER
-P: Mark M. Hoffman
-M: mhoffman@lightlink.com
+M: "Mark M. Hoffman" <mhoffman@lightlink.com>
L: linux-i2c@vger.kernel.org
S: Maintained
F: drivers/i2c/busses/i2c-stub.c
I2C SUBSYSTEM
-P: Jean Delvare (PC drivers, core)
-M: khali@linux-fr.org
-P: Ben Dooks (embedded platforms)
-M: ben-linux@fluff.org
+M: "Jean Delvare (PC drivers, core)" <khali@linux-fr.org>
+M: "Ben Dooks (embedded platforms)" <ben-linux@fluff.org>
L: linux-i2c@vger.kernel.org
W: http://i2c.wiki.kernel.org/
T: quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
F: include/linux/i2c-id.h
I2C-TINY-USB DRIVER
-P: Till Harbaum
-M: till@harbaum.org
+M: Till Harbaum <till@harbaum.org>
L: linux-i2c@vger.kernel.org
W: http://www.harbaum.org/till/i2c_tiny_usb
S: Maintained
F: drivers/i2c/busses/i2c-tiny-usb.c
i386 BOOT CODE
-P: H. Peter Anvin
-M: hpa@zytor.com
+M: "H. Peter Anvin" <hpa@zytor.com>
S: Maintained
F: arch/x86/boot/
i386 SETUP CODE / CPU ERRATA WORKAROUNDS
-P: H. Peter Anvin
-M: hpa@zytor.com
+M: "H. Peter Anvin" <hpa@zytor.com>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup.git
S: Maintained
IA64 (Itanium) PLATFORM
-P: Tony Luck
-P: Fenghua Yu
-M: tony.luck@intel.com
-M: fenghua.yu@intel.com
+M: Tony Luck <tony.luck@intel.com>
+M: Fenghua Yu <fenghua.yu@intel.com>
L: linux-ia64@vger.kernel.org
W: http://www.ia64-linux.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6.git
F: arch/ia64/
IBM MCA SCSI SUBSYSTEM DRIVER
-P: Michael Lang
-M: langa2@kph.uni-mainz.de
+M: Michael Lang <langa2@kph.uni-mainz.de>
W: http://www.uni-mainz.de/~langm000/linux.html
S: Maintained
F: drivers/scsi/ibmmca.c
IBM Power Linux RAID adapter
-P: Brian King
-M: brking@us.ibm.com
+M: Brian King <brking@us.ibm.com>
S: Supported
F: drivers/scsi/ipr.*
IBM ServeRAID RAID DRIVER
P: Jack Hammer
-P: Dave Jeffery
-M: ipslinux@adaptec.com
+M: Dave Jeffery <ipslinux@adaptec.com>
W: http://www.developer.ibm.com/welcome/netfinity/serveraid.html
S: Supported
F: drivers/scsi/ips.*
IDE SUBSYSTEM
-P: David S. Miller
-M: davem@davemloft.net
+M: "David S. Miller" <davem@davemloft.net>
L: linux-ide@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6.git
S: Maintained
F: include/linux/ide.h
IDE/ATAPI DRIVERS
-P: Borislav Petkov
-M: petkovbb@gmail.com
+M: Borislav Petkov <petkovbb@gmail.com>
L: linux-ide@vger.kernel.org
S: Maintained
F: Documentation/cdrom/ide-cd
F: drivers/ide/ide-cd*
IDLE-I7300
-P: Andy Henroid
-M: andrew.d.henroid@intel.com
+M: Andy Henroid <andrew.d.henroid@intel.com>
L: linux-pm@lists.linux-foundation.org
S: Supported
F: drivers/idle/i7300_idle.c
IEEE 1394 SUBSYSTEM
-P: Ben Collins
-M: ben.collins@ubuntu.com
-P: Stefan Richter
-M: stefanr@s5r6.in-berlin.de
+M: Ben Collins <ben.collins@ubuntu.com>
+M: Stefan Richter <stefanr@s5r6.in-berlin.de>
L: linux1394-devel@lists.sourceforge.net
W: http://www.linux1394.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git
F: drivers/ieee1394/
IEEE 1394 RAW I/O DRIVER
-P: Dan Dennedy
-M: dan@dennedy.org
-P: Stefan Richter
-M: stefanr@s5r6.in-berlin.de
+M: Dan Dennedy <dan@dennedy.org>
+M: Stefan Richter <stefanr@s5r6.in-berlin.de>
L: linux1394-devel@lists.sourceforge.net
S: Maintained
F: drivers/ieee1394/raw1394*
IEEE 802.15.4 SUBSYSTEM
-P: Dmitry Eremin-Solenikov
-M: dbaryshkov@gmail.com
-P: Sergey Lapin
-M: slapin@ossfans.org
+M: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+M: Sergey Lapin <slapin@ossfans.org>
L: linux-zigbee-devel@lists.sourceforge.net (moderated for non-subscribers)
W: http://apps.sourceforge.net/trac/linux-zigbee
T: git git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan.git
F: drivers/ieee802154/
INTEGRITY MEASUREMENT ARCHITECTURE (IMA)
-P: Mimi Zohar
-M: zohar@us.ibm.com
+M: Mimi Zohar <zohar@us.ibm.com>
S: Supported
F: security/integrity/ima/
F: drivers/video/imsttfb.c
INFINIBAND SUBSYSTEM
-P: Roland Dreier
-M: rolandd@cisco.com
-P: Sean Hefty
-M: sean.hefty@intel.com
-P: Hal Rosenstock
-M: hal.rosenstock@gmail.com
-L: general@lists.openfabrics.org (moderated for non-subscribers)
+M: Roland Dreier <rolandd@cisco.com>
+M: Sean Hefty <sean.hefty@intel.com>
+M: Hal Rosenstock <hal.rosenstock@gmail.com>
+L: linux-rdma@vger.kernel.org
W: http://www.openib.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband.git
S: Supported
F: include/linux/if_infiniband.h
INOTIFY
-P: John McCutchan
-M: john@johnmccutchan.com
-P: Robert Love
-M: rlove@rlove.org
-P: Eric Paris
-M: eparis@parisplace.org
+M: John McCutchan <john@johnmccutchan.com>
+M: Robert Love <rlove@rlove.org>
+M: Eric Paris <eparis@parisplace.org>
S: Maintained
F: Documentation/filesystems/inotify.txt
F: fs/notify/inotify/
F: include/linux/inotify.h
INPUT (KEYBOARD, MOUSE, JOYSTICK, TOUCHSCREEN) DRIVERS
-P: Dmitry Torokhov
-M: dmitry.torokhov@gmail.com
-M: dtor@mail.ru
+M: Dmitry Torokhov <dmitry.torokhov@gmail.com>
+M: Dmitry Torokhov <dtor@mail.ru>
L: linux-input@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git
S: Maintained
F: drivers/input/
INTEL FRAMEBUFFER DRIVER (excluding 810 and 815)
-P: Sylvain Meyer
-M: sylvain.meyer@worldonline.fr
+M: Sylvain Meyer <sylvain.meyer@worldonline.fr>
L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
S: Maintained
F: Documentation/fb/intelfb.txt
F: drivers/video/intelfb/
INTEL 810/815 FRAMEBUFFER DRIVER
-P: Antonino Daplas
-M: adaplas@gmail.com
+M: Antonino Daplas <adaplas@gmail.com>
L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
S: Maintained
F: drivers/video/i810/
INTEL MENLOW THERMAL DRIVER
-P: Sujith Thomas
-M: sujith.thomas@intel.com
+M: Sujith Thomas <sujith.thomas@intel.com>
L: linux-acpi@vger.kernel.org
W: http://www.lesswatts.org/projects/acpi/
S: Supported
F: drivers/platform/x86/intel_menlow.c
INTEL IA32 MICROCODE UPDATE SUPPORT
-P: Tigran Aivazian
-M: tigran@aivazian.fsnet.co.uk
+M: Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
S: Maintained
F: arch/x86/kernel/microcode_core.c
F: arch/x86/kernel/microcode_intel.c
INTEL I/OAT DMA DRIVER
-P: Maciej Sosnowski
-M: maciej.sosnowski@intel.com
+M: Maciej Sosnowski <maciej.sosnowski@intel.com>
S: Supported
F: drivers/dma/ioat*
INTEL IOMMU (VT-d)
-P: David Woodhouse
-M: dwmw2@infradead.org
+M: David Woodhouse <dwmw2@infradead.org>
L: iommu@lists.linux-foundation.org
T: git git://git.infradead.org/iommu-2.6.git
S: Supported
F: include/linux/intel-iommu.h
INTEL IOP-ADMA DMA DRIVER
-P: Dan Williams
-M: dan.j.williams@intel.com
+M: Dan Williams <dan.j.williams@intel.com>
S: Supported
F: drivers/dma/iop-adma.c
INTEL IXP4XX QMGR, NPE, ETHERNET and HSS SUPPORT
-P: Krzysztof Halasa
-M: khc@pm.waw.pl
+M: Krzysztof Halasa <khc@pm.waw.pl>
S: Maintained
F: arch/arm/mach-ixp4xx/include/mach/qmgr.h
F: arch/arm/mach-ixp4xx/include/mach/npe.h
F: drivers/net/wan/ixp4xx_hss.c
INTEL IXP4XX RANDOM NUMBER GENERATOR SUPPORT
-P: Deepak Saxena
-M: dsaxena@plexity.net
+M: Deepak Saxena <dsaxena@plexity.net>
S: Maintained
F: drivers/char/hw_random/ixp4xx-rng.c
INTEL IXP2000 ETHERNET DRIVER
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
+M: Lennert Buytenhek <kernel@wantstofly.org>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ixp2000/
INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/ixgb/ixgbe)
-P: Jeff Kirsher
-M: jeffrey.t.kirsher@intel.com
-P: Jesse Brandeburg
-M: jesse.brandeburg@intel.com
-P: Bruce Allan
-M: bruce.w.allan@intel.com
-P: PJ Waskiewicz
-M: peter.p.waskiewicz.jr@intel.com
-P: John Ronciak
-M: john.ronciak@intel.com
+M: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
+M: Jesse Brandeburg <jesse.brandeburg@intel.com>
+M: Bruce Allan <bruce.w.allan@intel.com>
+M: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
+M: John Ronciak <john.ronciak@intel.com>
L: e1000-devel@lists.sourceforge.net
W: http://e1000.sourceforge.net/
S: Supported
F: drivers/net/ixgbe/
INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT
-P: Zhu Yi
-M: yi.zhu@intel.com
-P: James Ketrenos
-M: jketreno@linux.intel.com
-P: Reinette Chatre
-M: reinette.chatre@intel.com
+M: Zhu Yi <yi.zhu@intel.com>
+M: James Ketrenos <jketreno@linux.intel.com>
+M: Reinette Chatre <reinette.chatre@intel.com>
L: linux-wireless@vger.kernel.org
L: ipw2100-devel@lists.sourceforge.net
W: http://lists.sourceforge.net/mailman/listinfo/ipw2100-devel
F: drivers/net/wireless/ipw2x00/ipw2100.*
INTEL PRO/WIRELESS 2915ABG NETWORK CONNECTION SUPPORT
-P: Zhu Yi
-M: yi.zhu@intel.com
-P: James Ketrenos
-M: jketreno@linux.intel.com
-P: Reinette Chatre
-M: reinette.chatre@intel.com
+M: Zhu Yi <yi.zhu@intel.com>
+M: James Ketrenos <jketreno@linux.intel.com>
+M: Reinette Chatre <reinette.chatre@intel.com>
L: linux-wireless@vger.kernel.org
L: ipw2100-devel@lists.sourceforge.net
W: http://lists.sourceforge.net/mailman/listinfo/ipw2100-devel
F: drivers/net/wireless/ipw2x00/ipw2200.*
INTEL WIRELESS WIMAX CONNECTION 2400
-P: Inaky Perez-Gonzalez
-M: inaky.perez-gonzalez@intel.com
+M: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
M: linux-wimax@intel.com
L: wimax@linuxwimax.org
S: Supported
F: include/linux/wimax/i2400m.h
INTEL WIRELESS WIFI LINK (iwlwifi)
-P: Zhu Yi
-M: yi.zhu@intel.com
-P: Reinette Chatre
-M: reinette.chatre@intel.com
+M: Zhu Yi <yi.zhu@intel.com>
+M: Reinette Chatre <reinette.chatre@intel.com>
L: linux-wireless@vger.kernel.org
L: ipw3945-devel@lists.sourceforge.net
W: http://intellinuxwireless.org
F: drivers/net/wireless/iwlwifi/
IOC3 ETHERNET DRIVER
-P: Ralf Baechle
-M: ralf@linux-mips.org
+M: Ralf Baechle <ralf@linux-mips.org>
L: linux-mips@linux-mips.org
S: Maintained
F: drivers/net/ioc3-eth.c
IOC3 SERIAL DRIVER
-P: Pat Gefre
-M: pfg@sgi.com
+M: Pat Gefre <pfg@sgi.com>
L: linux-mips@linux-mips.org
S: Maintained
F: drivers/serial/ioc3_serial.c
IP MASQUERADING
-P: Juanjo Ciarlante
-M: jjciarla@raiz.uncu.edu.ar
+M: Juanjo Ciarlante <jjciarla@raiz.uncu.edu.ar>
S: Maintained
F: net/ipv4/netfilter/ipt_MASQUERADE.c
IP1000A 10/100/1000 GIGABIT ETHERNET DRIVER
-P: Francois Romieu
-M: romieu@fr.zoreil.com
-P: Sorbica Shieh
-M: sorbica@icplus.com.tw
-P: Jesse Huang
-M: jesse@icplus.com.tw
+M: Francois Romieu <romieu@fr.zoreil.com>
+M: Sorbica Shieh <sorbica@icplus.com.tw>
+M: Jesse Huang <jesse@icplus.com.tw>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ipg.c
IPATH DRIVER
-P: Ralph Campbell
-M: infinipath@qlogic.com
-L: general@lists.openfabrics.org
+M: Ralph Campbell <infinipath@qlogic.com>
+L: linux-rdma@vger.kernel.org
T: git git://git.qlogic.com/ipath-linux-2.6
S: Supported
F: drivers/infiniband/hw/ipath/
IPMI SUBSYSTEM
-P: Corey Minyard
-M: minyard@acm.org
+M: Corey Minyard <minyard@acm.org>
L: openipmi-developer@lists.sourceforge.net
W: http://openipmi.sourceforge.net/
S: Supported
F: include/linux/ipmi*
IPS SCSI RAID DRIVER
-P: Adaptec OEM Raid Solutions
-M: aacraid@adaptec.com
+M: Adaptec OEM Raid Solutions <aacraid@adaptec.com>
L: linux-scsi@vger.kernel.org
W: http://www.adaptec.com/
S: Maintained
F: drivers/scsi/ips*
IPVS
-P: Wensong Zhang
-M: wensong@linux-vs.org
-P: Simon Horman
-M: horms@verge.net.au
-P: Julian Anastasov
-M: ja@ssi.bg
+M: Wensong Zhang <wensong@linux-vs.org>
+M: Simon Horman <horms@verge.net.au>
+M: Julian Anastasov <ja@ssi.bg>
L: netdev@vger.kernel.org
L: lvs-devel@vger.kernel.org
S: Maintained
F: net/netfilter/ipvs/
IPWIRELESS DRIVER
-P: Jiri Kosina
-M: jkosina@suse.cz
-P: David Sterba
-M: dsterba@suse.cz
+M: Jiri Kosina <jkosina@suse.cz>
+M: David Sterba <dsterba@suse.cz>
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/ipwireless_cs.git
F: drivers/char/pcmcia/ipwireless/
IPX NETWORK LAYER
-P: Arnaldo Carvalho de Melo
-M: acme@ghostprotocols.net
+M: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
L: netdev@vger.kernel.org
S: Maintained
F: include/linux/ipx.h
F: net/ipx/
IRDA SUBSYSTEM
-P: Samuel Ortiz
-M: samuel@sortiz.org
+M: Samuel Ortiz <samuel@sortiz.org>
L: irda-users@lists.sourceforge.net (subscribers-only)
W: http://irda.sourceforge.net/
S: Maintained
F: net/irda/
ISAPNP
-P: Jaroslav Kysela
-M: perex@perex.cz
+M: Jaroslav Kysela <perex@perex.cz>
S: Maintained
F: Documentation/isapnp.txt
F: drivers/pnp/isapnp/
F: include/linux/isapnp.h
ISCSI
-P: Mike Christie
-M: michaelc@cs.wisc.edu
+M: Mike Christie <michaelc@cs.wisc.edu>
L: open-iscsi@googlegroups.com
W: www.open-iscsi.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mnc/linux-2.6-iscsi.git
F: include/scsi/*iscsi*
ISDN SUBSYSTEM
-P: Karsten Keil
-M: isdn@linux-pingi.de
+M: Karsten Keil <isdn@linux-pingi.de>
L: isdn4linux@listserv.isdn4linux.de (subscribers-only)
W: http://www.isdn4linux.de
T: git git://git.kernel.org/pub/scm/linux/kernel/git/kkeil/isdn-2.6.git
F: include/linux/isdn/
ISDN SUBSYSTEM (Eicon active card driver)
-P: Armin Schindler
-M: mac@melware.de
+M: Armin Schindler <mac@melware.de>
L: isdn4linux@listserv.isdn4linux.de (subscribers-only)
W: http://www.melware.de
S: Maintained
F: drivers/isdn/hardware/eicon/
IVTV VIDEO4LINUX DRIVER
-P: Hans Verkuil
-M: hverkuil@xs4all.nl
+M: Hans Verkuil <hverkuil@xs4all.nl>
L: ivtv-devel@ivtvdriver.org
-L: ivtv-users@ivtvdriver.org
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
W: http://www.ivtvdriver.org
F: include/linux/ivtv*
JFS FILESYSTEM
-P: Dave Kleikamp
-M: shaggy@linux.vnet.ibm.com
+M: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
L: jfs-discussion@lists.sourceforge.net
W: http://jfs.sourceforge.net/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6.git
F: fs/jfs/
JME NETWORK DRIVER
-P: Guo-Fu Tseng
-M: cooldavid@cooldavid.org
+M: Guo-Fu Tseng <cooldavid@cooldavid.org>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/jme.*
JOURNALLING FLASH FILE SYSTEM V2 (JFFS2)
-P: David Woodhouse
-M: dwmw2@infradead.org
+M: David Woodhouse <dwmw2@infradead.org>
L: linux-mtd@lists.infradead.org
W: http://www.linux-mtd.infradead.org/doc/jffs2.html
S: Maintained
F: include/linux/jffs2.h
JOURNALLING LAYER FOR BLOCK DEVICES (JBD)
-P: Stephen Tweedie
-M: sct@redhat.com
-P: Andrew Morton
-M: akpm@linux-foundation.org
+M: Stephen Tweedie <sct@redhat.com>
+M: Andrew Morton <akpm@linux-foundation.org>
L: linux-ext4@vger.kernel.org
S: Maintained
F: fs/jbd*/
F: include/linux/jbd*.h
K8TEMP HARDWARE MONITORING DRIVER
-P: Rudolf Marek
-M: r.marek@assembler.cz
+M: Rudolf Marek <r.marek@assembler.cz>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/k8temp
F: drivers/hwmon/k8temp.c
KCONFIG
-P: Roman Zippel
-M: zippel@linux-m68k.org
+M: Roman Zippel <zippel@linux-m68k.org>
L: linux-kbuild@vger.kernel.org
S: Maintained
F: Documentation/kbuild/kconfig-language.txt
F: scripts/kconfig/
KDUMP
-P: Vivek Goyal
-M: vgoyal@redhat.com
-P: Haren Myneni
-M: hbabu@us.ibm.com
+M: Vivek Goyal <vgoyal@redhat.com>
+M: Haren Myneni <hbabu@us.ibm.com>
L: kexec@lists.infradead.org
W: http://lse.sourceforge.net/kdump/
S: Maintained
F: Documentation/kdump/
KERNEL AUTOMOUNTER (AUTOFS)
-P: H. Peter Anvin
-M: hpa@zytor.com
+M: "H. Peter Anvin" <hpa@zytor.com>
L: autofs@linux.kernel.org
S: Odd Fixes
F: fs/autofs/
KERNEL AUTOMOUNTER v4 (AUTOFS4)
-P: Ian Kent
-M: raven@themaw.net
+M: Ian Kent <raven@themaw.net>
L: autofs@linux.kernel.org
S: Maintained
F: fs/autofs4/
KERNEL BUILD
-P: Sam Ravnborg
-M: sam@ravnborg.org
+M: Sam Ravnborg <sam@ravnborg.org>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes.git
L: linux-kbuild@vger.kernel.org
F: scripts/Makefile.*
KERNEL JANITORS
-P: Several
L: kernel-janitors@vger.kernel.org
W: http://www.kerneljanitors.org/
-S: Maintained
+S: Odd fixes
KERNEL NFSD, SUNRPC, AND LOCKD SERVERS
-P: J. Bruce Fields
-M: bfields@fieldses.org
-P: Neil Brown
-M: neilb@suse.de
+M: "J. Bruce Fields" <bfields@fieldses.org>
+M: Neil Brown <neilb@suse.de>
L: linux-nfs@vger.kernel.org
W: http://nfs.sourceforge.net/
S: Supported
F: include/linux/sunrpc/
KERNEL VIRTUAL MACHINE (KVM)
-P: Avi Kivity
-M: avi@redhat.com
+M: Avi Kivity <avi@redhat.com>
L: kvm@vger.kernel.org
W: http://kvm.qumranet.com
S: Supported
F: virt/kvm/
KERNEL VIRTUAL MACHINE (KVM) FOR AMD-V
-P: Joerg Roedel
-M: joerg.roedel@amd.com
+M: Joerg Roedel <joerg.roedel@amd.com>
L: kvm@vger.kernel.org
W: http://kvm.qumranet.com
S: Supported
F: arch/x86/kvm/svm.c
KERNEL VIRTUAL MACHINE (KVM) FOR POWERPC
-P: Hollis Blanchard
-M: hollisb@us.ibm.com
+M: Hollis Blanchard <hollisb@us.ibm.com>
L: kvm-ppc@vger.kernel.org
W: http://kvm.qumranet.com
S: Supported
F: arch/powerpc/kvm/
KERNEL VIRTUAL MACHINE For Itanium (KVM/IA64)
-P: Xiantao Zhang
-M: xiantao.zhang@intel.com
+M: Xiantao Zhang <xiantao.zhang@intel.com>
L: kvm-ia64@vger.kernel.org
W: http://kvm.qumranet.com
S: Supported
F: arch/ia64/kvm/
KERNEL VIRTUAL MACHINE for s390 (KVM/s390)
-P: Carsten Otte
-M: cotte@de.ibm.com
-P: Christian Borntraeger
-M: borntraeger@de.ibm.com
+M: Carsten Otte <cotte@de.ibm.com>
+M: Christian Borntraeger <borntraeger@de.ibm.com>
M: linux390@de.ibm.com
L: linux-s390@vger.kernel.org
W: http://www.ibm.com/developerworks/linux/linux390/
F: arch/s390/kvm/
KEXEC
-P: Eric Biederman
-M: ebiederm@xmission.com
+M: Eric Biederman <ebiederm@xmission.com>
W: http://ftp.kernel.org/pub/linux/kernel/people/horms/kexec-tools/
L: kexec@lists.infradead.org
S: Maintained
F: kernel/kexec.c
KGDB
-P: Jason Wessel
-M: jason.wessel@windriver.com
+M: Jason Wessel <jason.wessel@windriver.com>
L: kgdb-bugreport@lists.sourceforge.net
S: Maintained
F: Documentation/DocBook/kgdb.tmpl
F: kernel/kgdb.c
KMEMCHECK
-P: Vegard Nossum
-M: vegardno@ifi.uio.no
+M: Vegard Nossum <vegardno@ifi.uio.no>
P Pekka Enberg
M: penberg@cs.helsinki.fi
-L: linux-kernel@vger.kernel.org
S: Maintained
KMEMLEAK
-P: Catalin Marinas
-M: catalin.marinas@arm.com
-L: linux-kernel@vger.kernel.org
+M: Catalin Marinas <catalin.marinas@arm.com>
S: Maintained
F: Documentation/kmemleak.txt
F: include/linux/kmemleak.h
F: mm/kmemleak-test.c
KMEMTRACE
-P: Eduard - Gabriel Munteanu
-M: eduard.munteanu@linux360.ro
+M: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
S: Maintained
F: Documentation/trace/kmemtrace.txt
F: include/linux/kmemtrace.h
F: kernel/trace/kmemtrace.c
KPROBES
-P: Ananth N Mavinakayanahalli
-M: ananth@in.ibm.com
-P: Anil S Keshavamurthy
-M: anil.s.keshavamurthy@intel.com
-P: David S. Miller
-M: davem@davemloft.net
-P: Masami Hiramatsu
-M: mhiramat@redhat.com
+M: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
+M: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
+M: "David S. Miller" <davem@davemloft.net>
+M: Masami Hiramatsu <mhiramat@redhat.com>
S: Maintained
F: Documentation/kprobes.txt
F: include/linux/kprobes.h
F: kernel/kprobes.c
KS0108 LCD CONTROLLER DRIVER
-P: Miguel Ojeda Sandonis
-M: miguel.ojeda.sandonis@gmail.com
+M: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>
W: http://miguelojeda.es/auxdisplay.htm
W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
S: Maintained
F: net/lapb/
LASI 53c700 driver for PARISC
-P: James E.J. Bottomley
-M: James.Bottomley@HansenPartnership.com
+M: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
L: linux-scsi@vger.kernel.org
S: Maintained
F: Documentation/scsi/53c700.txt
F: drivers/scsi/53c700*
LED SUBSYSTEM
-P: Richard Purdie
-M: rpurdie@rpsys.net
+M: Richard Purdie <rpurdie@rpsys.net>
S: Maintained
F: drivers/leds/
F: include/linux/leds.h
LEGO USB Tower driver
-P: Juergen Stuber
-M: starblue@users.sourceforge.net
+M: Juergen Stuber <starblue@users.sourceforge.net>
L: legousb-devel@lists.sourceforge.net
W: http://legousb.sourceforge.net/
S: Maintained
F: drivers/usb/misc/legousbtower.c
LGUEST
-P: Rusty Russell
-M: rusty@rustcorp.com.au
+M: Rusty Russell <rusty@rustcorp.com.au>
L: lguest@ozlabs.org
W: http://lguest.ozlabs.org/
S: Maintained
F: arch/x86/include/asm/lguest*.h
LINUX FOR IBM pSERIES (RS/6000)
-P: Paul Mackerras
-M: paulus@au.ibm.com
+M: Paul Mackerras <paulus@au.ibm.com>
W: http://www.ibm.com/linux/ltc/projects/ppc
S: Supported
LINUX FOR POWERPC (32-BIT AND 64-BIT)
-P: Benjamin Herrenschmidt
-M: benh@kernel.crashing.org
-P: Paul Mackerras
-M: paulus@samba.org
+M: Benjamin Herrenschmidt <benh@kernel.crashing.org>
+M: Paul Mackerras <paulus@samba.org>
W: http://www.penguinppc.org/
L: linuxppc-dev@ozlabs.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc.git
S: Supported
LINUX FOR POWER MACINTOSH
-P: Benjamin Herrenschmidt
-M: benh@kernel.crashing.org
+M: Benjamin Herrenschmidt <benh@kernel.crashing.org>
W: http://www.penguinppc.org/
L: linuxppc-dev@ozlabs.org
S: Maintained
LINUX FOR POWERPC EMBEDDED MPC5XXX
-P: Grant Likely
-M: grant.likely@secretlab.ca
+M: Grant Likely <grant.likely@secretlab.ca>
L: linuxppc-dev@ozlabs.org
T: git git://git.secretlab.ca/git/linux-2.6.git
S: Maintained
LINUX FOR POWERPC EMBEDDED PPC4XX
-P: Josh Boyer
-M: jwboyer@linux.vnet.ibm.com
-P: Matt Porter
-M: mporter@kernel.crashing.org
+M: Josh Boyer <jwboyer@linux.vnet.ibm.com>
+M: Matt Porter <mporter@kernel.crashing.org>
W: http://www.penguinppc.org/
L: linuxppc-dev@ozlabs.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx.git
S: Maintained
LINUX FOR POWERPC EMBEDDED XILINX VIRTEX
-P: Grant Likely
-M: grant.likely@secretlab.ca
+M: Grant Likely <grant.likely@secretlab.ca>
W: http://wiki.secretlab.ca/index.php/Linux_on_Xilinx_Virtex
L: linuxppc-dev@ozlabs.org
T: git git://git.secretlab.ca/git/linux-2.6.git
S: Maintained
LINUX FOR POWERPC EMBEDDED PPC8XX
-P: Vitaly Bordug
-M: vitb@kernel.crashing.org
-P: Marcelo Tosatti
-M: marcelo@kvack.org
+M: Vitaly Bordug <vitb@kernel.crashing.org>
+M: Marcelo Tosatti <marcelo@kvack.org>
W: http://www.penguinppc.org/
L: linuxppc-dev@ozlabs.org
S: Maintained
LINUX FOR POWERPC EMBEDDED PPC83XX AND PPC85XX
-P: Kumar Gala
-M: galak@kernel.crashing.org
+M: Kumar Gala <galak@kernel.crashing.org>
W: http://www.penguinppc.org/
L: linuxppc-dev@ozlabs.org
S: Maintained
LINUX FOR POWERPC PA SEMI PWRFICIENT
-P: Olof Johansson
-M: olof@lixom.net
+M: Olof Johansson <olof@lixom.net>
W: http://www.pasemi.com/
L: linuxppc-dev@ozlabs.org
S: Supported
LINUX SECURITY MODULE (LSM) FRAMEWORK
-P: Chris Wright
-M: chrisw@sous-sol.org
+M: Chris Wright <chrisw@sous-sol.org>
L: linux-security-module@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/chrisw/lsm-2.6.git
S: Supported
LLC (802.2)
-P: Arnaldo Carvalho de Melo
-M: acme@ghostprotocols.net
+M: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
S: Maintained
F: include/linux/llc.h
F: include/net/llc*
F: net/llc/
LIS3LV02D ACCELEROMETER DRIVER
-P: Eric Piel
-M: eric.piel@tremplin-utc.net
+M: Eric Piel <eric.piel@tremplin-utc.net>
S: Maintained
F: Documentation/hwmon/lis3lv02d
F: drivers/hwmon/lis3lv02d.*
LM83 HARDWARE MONITOR DRIVER
-P: Jean Delvare
-M: khali@linux-fr.org
+M: Jean Delvare <khali@linux-fr.org>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/lm83
F: drivers/hwmon/lm83.c
LM90 HARDWARE MONITOR DRIVER
-P: Jean Delvare
-M: khali@linux-fr.org
+M: Jean Delvare <khali@linux-fr.org>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/lm90
F: drivers/hwmon/lm90.c
LOCKDEP AND LOCKSTAT
-P: Peter Zijlstra
-M: peterz@infradead.org
-P: Ingo Molnar
-M: mingo@redhat.com
+M: Peter Zijlstra <peterz@infradead.org>
+M: Ingo Molnar <mingo@redhat.com>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep.git
S: Maintained
F: Documentation/lockdep*.txt
F: kernel/lockdep*
LOGICAL DISK MANAGER SUPPORT (LDM, Windows 2000/XP/Vista Dynamic Disks)
-P: Richard Russon (FlatCap)
-M: ldm@flatcap.org
+M: "Richard Russon (FlatCap)" <ldm@flatcap.org>
L: linux-ntfs-dev@lists.sourceforge.net
W: http://www.linux-ntfs.org/content/view/19/37/
S: Maintained
F: fs/partitions/ldm.*
LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI)
-P: Eric Moore
-M: Eric.Moore@lsi.com
+M: Eric Moore <Eric.Moore@lsi.com>
M: support@lsi.com
L: DL-MPTFusionLinux@lsi.com
L: linux-scsi@vger.kernel.org
F: drivers/message/fusion/
LSILOGIC/SYMBIOS/NCR 53C8XX and 53C1010 PCI-SCSI drivers
-P: Matthew Wilcox
-M: matthew@wil.cx
+M: Matthew Wilcox <matthew@wil.cx>
L: linux-scsi@vger.kernel.org
S: Maintained
F: drivers/scsi/sym53c8xx_2/
LTP (Linux Test Project)
-P: Subrata Modak
-M: subrata@linux.vnet.ibm.com
-P: Mike Frysinger
-M: vapier@gentoo.org
+M: Subrata Modak <subrata@linux.vnet.ibm.com>
+M: Mike Frysinger <vapier@gentoo.org>
L: ltp-list@lists.sourceforge.net (subscribers-only)
W: http://ltp.sourceforge.net/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/galak/ltp.git
S: Maintained
M32R ARCHITECTURE
-P: Hirokazu Takata
-M: takata@linux-m32r.org
+M: Hirokazu Takata <takata@linux-m32r.org>
L: linux-m32r@ml.linux-m32r.org
L: linux-m32r-ja@ml.linux-m32r.org (in Japanese)
W: http://www.linux-m32r.org/
F: arch/m32r/
M68K ARCHITECTURE
-P: Geert Uytterhoeven
-M: geert@linux-m68k.org
-P: Roman Zippel
-M: zippel@linux-m68k.org
+M: Geert Uytterhoeven <geert@linux-m68k.org>
+M: Roman Zippel <zippel@linux-m68k.org>
L: linux-m68k@lists.linux-m68k.org
W: http://www.linux-m68k.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k.git
F: drivers/zorro/
M68K ON APPLE MACINTOSH
-P: Joshua Thompson
-M: funaho@jurai.org
+M: Joshua Thompson <funaho@jurai.org>
W: http://www.mac.linux-m68k.org/
L: linux-m68k@lists.linux-m68k.org
S: Maintained
F: arch/m68k/mac/
M68K ON HP9000/300
-P: Philip Blundell
-M: philb@gnu.org
+M: Philip Blundell <philb@gnu.org>
W: http://www.tazenda.demon.co.uk/phil/linux-hp
S: Maintained
F: arch/m68k/hp300/
MAC80211
-P: Johannes Berg
-M: johannes@sipsolutions.net
+M: Johannes Berg <johannes@sipsolutions.net>
L: linux-wireless@vger.kernel.org
W: http://linuxwireless.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git
F: net/mac80211/
MAC80211 PID RATE CONTROL
-P: Stefano Brivio
-M: stefano.brivio@polimi.it
-P: Mattias Nissler
-M: mattias.nissler@gmx.de
+M: Stefano Brivio <stefano.brivio@polimi.it>
+M: Mattias Nissler <mattias.nissler@gmx.de>
L: linux-wireless@vger.kernel.org
W: http://linuxwireless.org/en/developers/Documentation/mac80211/RateControl/PID
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git
F: net/mac80211/rc80211_pid*
MACVLAN DRIVER
-P: Patrick McHardy
-M: kaber@trash.net
+M: Patrick McHardy <kaber@trash.net>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/macvlan.c
F: include/linux/if_macvlan.h
MAN-PAGES: MANUAL PAGES FOR LINUX -- Sections 2, 3, 4, 5, and 7
-P: Michael Kerrisk
-M: mtk.manpages@gmail.com
+M: Michael Kerrisk <mtk.manpages@gmail.com>
W: http://www.kernel.org/doc/man-pages
L: linux-man@vger.kernel.org
S: Maintained
MARVELL LIBERTAS WIRELESS DRIVER
-P: Dan Williams
-M: dcbw@redhat.com
+M: Dan Williams <dcbw@redhat.com>
L: libertas-dev@lists.infradead.org
S: Maintained
F: drivers/net/wireless/libertas/
MARVELL MV643XX ETHERNET DRIVER
-P: Lennert Buytenhek
-M: buytenh@marvell.com
+M: Lennert Buytenhek <buytenh@marvell.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/mv643xx_eth.*
F: include/linux/mv643xx.h
MARVELL SOC MMC/SD/SDIO CONTROLLER DRIVER
-P: Nicolas Pitre
-M: nico@cam.org
+M: Nicolas Pitre <nico@cam.org>
S: Maintained
MARVELL YUKON / SYSKONNECT DRIVER
-P: Mirko Lindner
-M: mlindner@syskonnect.de
-P: Ralph Roesler
-M: rroesler@syskonnect.de
+M: Mirko Lindner <mlindner@syskonnect.de>
+M: Ralph Roesler <rroesler@syskonnect.de>
W: http://www.syskonnect.com
S: Supported
MATROX FRAMEBUFFER DRIVER
-P: Petr Vandrovec
-M: vandrove@vc.cvut.cz
+M: Petr Vandrovec <vandrove@vc.cvut.cz>
L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
S: Maintained
F: drivers/video/matrox/matroxfb_*
F: include/linux/matroxfb.h
MAX6650 HARDWARE MONITOR AND FAN CONTROLLER DRIVER
-P: Hans J. Koch
-M: hjk@linutronix.de
+M: "Hans J. Koch" <hjk@linutronix.de>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/max6650
F: drivers/hwmon/max6650.c
MEDIA INPUT INFRASTRUCTURE (V4L/DVB)
-P: Mauro Carvalho Chehab
-M: mchehab@infradead.org
+M: Mauro Carvalho Chehab <mchehab@infradead.org>
P: LinuxTV.org Project
L: linux-media@vger.kernel.org
W: http://linuxtv.org
F: include/linux/videodev*.h
MEGARAID SCSI DRIVERS
-P: Neela Syam Kolli
-M: megaraidlinux@lsi.com
+M: Neela Syam Kolli <megaraidlinux@lsi.com>
L: linux-scsi@vger.kernel.org
W: http://megaraid.lsilogic.com
S: Maintained
F: mm/
MEMORY RESOURCE CONTROLLER
-P: Balbir Singh
-M: balbir@linux.vnet.ibm.com
-P: Pavel Emelyanov
-M: xemul@openvz.org
-P: KAMEZAWA Hiroyuki
-M: kamezawa.hiroyu@jp.fujitsu.com
+M: Balbir Singh <balbir@linux.vnet.ibm.com>
+M: Pavel Emelyanov <xemul@openvz.org>
+M: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
L: linux-mm@kvack.org
S: Maintained
F: mm/memcontrol.c
MEMORY TECHNOLOGY DEVICES (MTD)
-P: David Woodhouse
-M: dwmw2@infradead.org
+M: David Woodhouse <dwmw2@infradead.org>
W: http://www.linux-mtd.infradead.org/
L: linux-mtd@lists.infradead.org
T: git git://git.infradead.org/mtd-2.6.git
F: include/mtd/
MICROBLAZE ARCHITECTURE
-P: Michal Simek
-M: monstr@monstr.eu
+M: Michal Simek <monstr@monstr.eu>
L: microblaze-uclinux@itee.uq.edu.au
W: http://www.monstr.eu/fdt/
T: git git://git.monstr.eu/linux-2.6-microblaze.git
F: arch/microblaze/
MICROTEK X6 SCANNER
-P: Oliver Neukum
-M: oliver@neukum.name
+M: Oliver Neukum <oliver@neukum.name>
S: Maintained
F: drivers/usb/image/microtek.*
MIPS
-P: Ralf Baechle
-M: ralf@linux-mips.org
+M: Ralf Baechle <ralf@linux-mips.org>
W: http://www.linux-mips.org/
L: linux-mips@linux-mips.org
T: git git://git.linux-mips.org/pub/scm/linux.git
F: arch/mips/
MISCELLANEOUS MCA-SUPPORT
-P: James Bottomley
-M: James.Bottomley@HansenPartnership.com
+M: James Bottomley <James.Bottomley@HansenPartnership.com>
S: Maintained
F: Documentation/ia64/mca.txt
F: Documentation/mca.txt
F: include/linux/mca*
MODULE SUPPORT
-P: Rusty Russell
-M: rusty@rustcorp.com.au
+M: Rusty Russell <rusty@rustcorp.com.au>
S: Maintained
F: include/linux/module.h
F: kernel/module.c
MOTION EYE VAIO PICTUREBOOK CAMERA DRIVER
-P: Stelian Pop
-M: stelian@popies.net
+M: Stelian Pop <stelian@popies.net>
W: http://popies.net/meye/
S: Maintained
F: Documentation/video4linux/meye.txt
F: include/linux/meye.h
MOTOROLA IMX MMC/SD HOST CONTROLLER INTERFACE DRIVER
-P: Pavel Pisa
-M: ppisa@pikron.com
+M: Pavel Pisa <ppisa@pikron.com>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
F: drivers/mmc/host/imxmmc.*
MOUSE AND MISC DEVICES [GENERAL]
-P: Alessandro Rubini
-M: rubini@ipvvis.unipv.it
+M: Alessandro Rubini <rubini@ipvvis.unipv.it>
S: Maintained
F: drivers/input/mouse/
F: include/linux/gpio_mouse.h
MOXA SMARTIO/INDUSTIO/INTELLIO SERIAL CARD
-P: Jiri Slaby
-M: jirislaby@gmail.com
+M: Jiri Slaby <jirislaby@gmail.com>
S: Maintained
F: Documentation/serial/moxa-smartio
F: drivers/char/mxser.*
MSI LAPTOP SUPPORT
-P: Lennart Poettering
-M: mzxreary@0pointer.de
+M: Lennart Poettering <mzxreary@0pointer.de>
W: https://tango.0pointer.de/mailman/listinfo/s270-linux
W: http://0pointer.de/lennart/tchibo.html
S: Maintained
F: drivers/platform/x86/msi-laptop.c
MULTIFUNCTION DEVICES (MFD)
-P: Samuel Ortiz
-M: sameo@linux.intel.com
+M: Samuel Ortiz <sameo@linux.intel.com>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6.git
S: Supported
F: drivers/mfd/
MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM
-P: Pierre Ossman
-M: pierre@ossman.eu
-S: Maintained
+S: Orphan
+L: linux-mmc@vger.kernel.org
F: drivers/mmc/
F: include/linux/mmc/
MULTIMEDIA CARD (MMC) ETC. OVER SPI
-P: David Brownell
-M: dbrownell@users.sourceforge.net
+M: David Brownell <dbrownell@users.sourceforge.net>
S: Odd Fixes
F: drivers/mmc/host/mmc_spi.c
F: include/linux/spi/mmc_spi.h
MULTISOUND SOUND DRIVER
-P: Andrew Veliath
-M: andrewtv@usa.net
+M: Andrew Veliath <andrewtv@usa.net>
S: Maintained
F: Documentation/sound/oss/MultiSound
F: sound/oss/msnd*
MULTITECH MULTIPORT CARD (ISICOM)
-P: Jiri Slaby
-M: jirislaby@gmail.com
+M: Jiri Slaby <jirislaby@gmail.com>
S: Maintained
F: drivers/char/isicom.c
F: include/linux/isicom.h
MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
-P: Felipe Balbi
-M: felipe.balbi@nokia.com
+M: Felipe Balbi <felipe.balbi@nokia.com>
L: linux-usb@vger.kernel.org
T: git git://gitorious.org/musb/mainline.git
S: Maintained
F: drivers/usb/musb/
MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE)
-P: Andrew Gallatin
-M: gallatin@myri.com
-P: Brice Goglin
-M: brice@myri.com
+M: Andrew Gallatin <gallatin@myri.com>
+M: Brice Goglin <brice@myri.com>
L: netdev@vger.kernel.org
W: http://www.myri.com/scs/download-Myri10GE.html
S: Supported
F: drivers/net/myri10ge/
NATSEMI ETHERNET DRIVER (DP8381x)
-P: Tim Hockin
-M: thockin@hockin.org
+M: Tim Hockin <thockin@hockin.org>
S: Maintained
F: drivers/net/natsemi.c
NCP FILESYSTEM
-P: Petr Vandrovec
-M: vandrove@vc.cvut.cz
+M: Petr Vandrovec <vandrove@vc.cvut.cz>
L: linware@sh.cvut.cz
S: Maintained
F: fs/ncpfs/
NCR DUAL 700 SCSI DRIVER (MICROCHANNEL)
-P: James E.J. Bottomley
-M: James.Bottomley@HansenPartnership.com
+M: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
L: linux-scsi@vger.kernel.org
S: Maintained
F: drivers/scsi/NCR_D700.*
NETEFFECT IWARP RNIC DRIVER (IW_NES)
-P: Faisal Latif
-M: faisal.latif@intel.com
-P: Chien Tung
-M: chien.tin.tung@intel.com
-L: general@lists.openfabrics.org
+M: Faisal Latif <faisal.latif@intel.com>
+M: Chien Tung <chien.tin.tung@intel.com>
+L: linux-rdma@vger.kernel.org
W: http://www.neteffect.com
S: Supported
F: drivers/infiniband/hw/nes/
NETEM NETWORK EMULATOR
-P: Stephen Hemminger
-M: shemminger@linux-foundation.org
+M: Stephen Hemminger <shemminger@linux-foundation.org>
L: netem@lists.linux-foundation.org
S: Maintained
F: net/sched/sch_netem.c
NETERION (S2IO) 10GbE DRIVER (xframe/vxge)
-P: Ramkrishna Vepa
-M: ram.vepa@neterion.com
-P: Rastapur Santosh
-M: santosh.rastapur@neterion.com
-P: Sivakumar Subramani
-M: sivakumar.subramani@neterion.com
-P: Sreenivasa Honnur
-M: sreenivasa.honnur@neterion.com
-P: Anil Murthy
-M: anil.murthy@neterion.com
+M: Ramkrishna Vepa <ram.vepa@neterion.com>
+M: Rastapur Santosh <santosh.rastapur@neterion.com>
+M: Sivakumar Subramani <sivakumar.subramani@neterion.com>
+M: Sreenivasa Honnur <sreenivasa.honnur@neterion.com>
+M: Anil Murthy <anil.murthy@neterion.com>
L: netdev@vger.kernel.org
W: http://trac.neterion.com/cgi-bin/trac.cgi/wiki/Linux?Anonymous
W: http://trac.neterion.com/cgi-bin/trac.cgi/wiki/X3100Linux?Anonymous
P: James Morris
P: Harald Welte
P: Jozsef Kadlecsik
-P: Patrick McHardy
-M: kaber@trash.net
+M: Patrick McHardy <kaber@trash.net>
L: netfilter-devel@vger.kernel.org
L: netfilter@vger.kernel.org
L: coreteam@netfilter.org
W: http://www.netfilter.org/
W: http://www.iptables.org/
+T: git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6.git
S: Supported
F: include/linux/netfilter*
F: include/linux/netfilter/
F: net/netfilter/
NETLABEL
-P: Paul Moore
-M: paul.moore@hp.com
+M: Paul Moore <paul.moore@hp.com>
W: http://netlabel.sf.net
L: netdev@vger.kernel.org
S: Supported
F: net/netlabel/
NETROM NETWORK LAYER
-P: Ralf Baechle
-M: ralf@linux-mips.org
+M: Ralf Baechle <ralf@linux-mips.org>
L: linux-hams@vger.kernel.org
W: http://www.linux-ax25.org/
S: Maintained
F: net/netrom/
NETWORK BLOCK DEVICE (NBD)
-P: Paul Clements
-M: Paul.Clements@steeleye.com
+M: Paul Clements <Paul.Clements@steeleye.com>
S: Maintained
F: Documentation/blockdev/nbd.txt
F: drivers/block/nbd.c
F: include/linux/nbd.h
NETWORKING [GENERAL]
-P: David S. Miller
-M: davem@davemloft.net
+M: "David S. Miller" <davem@davemloft.net>
L: netdev@vger.kernel.org
W: http://www.linuxfoundation.org/en/Net
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
S: Maintained
F: net/
F: include/net/
+F: include/linux/in.h
+F: include/linux/net.h
+F: include/linux/netdevice.h
NETWORKING [IPv4/IPv6]
-P: David S. Miller
-M: davem@davemloft.net
-P: Alexey Kuznetsov
-M: kuznet@ms2.inr.ac.ru
-P: Pekka Savola (ipv6)
-M: pekkas@netcore.fi
-P: James Morris
-M: jmorris@namei.org
-P: Hideaki YOSHIFUJI
-M: yoshfuji@linux-ipv6.org
-P: Patrick McHardy
-M: kaber@trash.net
+M: "David S. Miller" <davem@davemloft.net>
+M: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
+M: "Pekka Savola (ipv6)" <pekkas@netcore.fi>
+M: James Morris <jmorris@namei.org>
+M: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
+M: Patrick McHardy <kaber@trash.net>
L: netdev@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
S: Maintained
F: include/net/ip*
NETWORKING [LABELED] (NetLabel, CIPSO, Labeled IPsec, SECMARK)
-P: Paul Moore
-M: paul.moore@hp.com
+M: Paul Moore <paul.moore@hp.com>
L: netdev@vger.kernel.org
S: Maintained
NETWORKING [WIRELESS]
-P: John W. Linville
-M: linville@tuxdriver.com
+M: "John W. Linville" <linville@tuxdriver.com>
L: linux-wireless@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
S: Odd Fixes
F: drivers/net/
+F: include/linux/if_*
+F: include/linux/*device.h
NETXEN (1/10) GbE SUPPORT
-P: Dhananjay Phadke
-M: dhananjay@netxen.com
+M: Dhananjay Phadke <dhananjay@netxen.com>
L: netdev@vger.kernel.org
W: http://www.netxen.com
S: Supported
F: drivers/net/netxen/
NFS, SUNRPC, AND LOCKD CLIENTS
-P: Trond Myklebust
-M: Trond.Myklebust@netapp.com
+M: Trond Myklebust <Trond.Myklebust@netapp.com>
L: linux-nfs@vger.kernel.org
W: http://client.linux-nfs.org
T: git git://git.linux-nfs.org/pub/linux/nfs-2.6.git
F: include/linux/sunrpc/
NI5010 NETWORK DRIVER
-P: Jan-Pascal van Best
-M: janpascal@vanbest.org
-P: Andreas Mohr
-M: andi@lisas.de
+M: Jan-Pascal van Best <janpascal@vanbest.org>
+M: Andreas Mohr <andi@lisas.de>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ni5010.*
NILFS2 FILESYSTEM
-P: KONISHI Ryusuke
-M: konishi.ryusuke@lab.ntt.co.jp
+M: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
L: users@nilfs.org
W: http://www.nilfs.org/en/
S: Supported
F: include/linux/nilfs2_fs.h
NINJA SCSI-3 / NINJA SCSI-32Bi (16bit/CardBus) PCMCIA SCSI HOST ADAPTER DRIVER
-P: YOKOTA Hiroshi
-M: yokota@netlab.is.tsukuba.ac.jp
+M: YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
W: http://www.netlab.is.tsukuba.ac.jp/~yokota/izumi/ninja/
S: Maintained
F: Documentation/scsi/NinjaSCSI.txt
F: drivers/scsi/pcmcia/nsp_*
NINJA SCSI-32Bi/UDE PCI/CARDBUS SCSI HOST ADAPTER DRIVER
-P: GOTO Masanori
-M: gotom@debian.or.jp
-P: YOKOTA Hiroshi
-M: yokota@netlab.is.tsukuba.ac.jp
+M: GOTO Masanori <gotom@debian.or.jp>
+M: YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
W: http://www.netlab.is.tsukuba.ac.jp/~yokota/izumi/ninja/
S: Maintained
F: Documentation/scsi/NinjaSCSI.txt
F: drivers/scsi/nsp32*
NTFS FILESYSTEM
-P: Anton Altaparmakov
-M: aia21@cantab.net
+M: Anton Altaparmakov <aia21@cantab.net>
L: linux-ntfs-dev@lists.sourceforge.net
W: http://www.linux-ntfs.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs-2.6.git
F: fs/ntfs/
NVIDIA (rivafb and nvidiafb) FRAMEBUFFER DRIVER
-P: Antonino Daplas
-M: adaplas@gmail.com
+M: Antonino Daplas <adaplas@gmail.com>
L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
S: Maintained
F: drivers/video/riva/
F: drivers/video/nvidia/
OMAP SUPPORT
-P: Tony Lindgren <tony@atomide.com>
-M: tony@atomide.com
+M: "Tony Lindgren <tony@atomide.com>" <tony@atomide.com>
L: linux-omap@vger.kernel.org
W: http://www.muru.com/linux/omap/
W: http://linux.omap.com/
F: arch/arm/*omap*
OMAP CLOCK FRAMEWORK SUPPORT
-P: Paul Walmsley
-M: paul@pwsan.com
+M: Paul Walmsley <paul@pwsan.com>
L: linux-omap@vger.kernel.org
S: Maintained
F: arch/arm/*omap*/*clock*
OMAP POWER MANAGEMENT SUPPORT
-P: Kevin Hilman
-M: khilman@deeprootsystems.com
+M: Kevin Hilman <khilman@deeprootsystems.com>
L: linux-omap@vger.kernel.org
S: Maintained
F: arch/arm/*omap*/*pm*
OMAP AUDIO SUPPORT
-P: Jarkko Nikula
-M: jhnikula@gmail.com
+M: Jarkko Nikula <jhnikula@gmail.com>
L: alsa-devel@alsa-project.org (subscribers-only)
L: linux-omap@vger.kernel.org
S: Maintained
F: sound/soc/omap/
OMAP FRAMEBUFFER SUPPORT
-P: Imre Deak
-M: imre.deak@nokia.com
+M: Imre Deak <imre.deak@nokia.com>
L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
L: linux-omap@vger.kernel.org
S: Maintained
F: drivers/video/omap/
OMAP MMC SUPPORT
-P: Jarkko Lavinen
-M: jarkko.lavinen@nokia.com
-L: linux-kernel@vger.kernel.org
+M: Jarkko Lavinen <jarkko.lavinen@nokia.com>
L: linux-omap@vger.kernel.org
S: Maintained
F: drivers/mmc/host/*omap*
OMAP RANDOM NUMBER GENERATOR SUPPORT
-P: Deepak Saxena
-M: dsaxena@plexity.net
+M: Deepak Saxena <dsaxena@plexity.net>
S: Maintained
F: drivers/char/hw_random/omap-rng.c
OMAP USB SUPPORT
-P: Felipe Balbi
-M: felipe.balbi@nokia.com
-P: David Brownell
-M: dbrownell@users.sourceforge.net
+M: Felipe Balbi <felipe.balbi@nokia.com>
+M: David Brownell <dbrownell@users.sourceforge.net>
L: linux-usb@vger.kernel.org
L: linux-omap@vger.kernel.org
S: Maintained
OMFS FILESYSTEM
-P: Bob Copeland
-M: me@bobcopeland.com
+M: Bob Copeland <me@bobcopeland.com>
L: linux-karma-devel@lists.sourceforge.net
S: Maintained
F: Documentation/filesystems/omfs.txt
F: fs/omfs/
OMNIKEY CARDMAN 4000 DRIVER
-P: Harald Welte
-M: laforge@gnumonks.org
+M: Harald Welte <laforge@gnumonks.org>
S: Maintained
F: drivers/char/pcmcia/cm4000_cs.c
F: include/linux/cm4000_cs.h
OMNIKEY CARDMAN 4040 DRIVER
-P: Harald Welte
-M: laforge@gnumonks.org
+M: Harald Welte <laforge@gnumonks.org>
S: Maintained
F: drivers/char/pcmcia/cm4040_cs.*
OMNIVISION OV7670 SENSOR DRIVER
-P: Jonathan Corbet
-M: corbet@lwn.net
+M: Jonathan Corbet <corbet@lwn.net>
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
F: drivers/media/video/ov7670.c
ONENAND FLASH DRIVER
-P: Kyungmin Park
-M: kyungmin.park@samsung.com
+M: Kyungmin Park <kyungmin.park@samsung.com>
L: linux-mtd@lists.infradead.org
S: Maintained
F: drivers/mtd/onenand/
F: include/linux/mtd/onenand*.h
ONSTREAM SCSI TAPE DRIVER
-P: Willem Riede
-M: osst@riede.org
+M: Willem Riede <osst@riede.org>
L: osst-users@lists.sourceforge.net
L: linux-scsi@vger.kernel.org
S: Maintained
F: drivers/scsi/st*
OPENCORES I2C BUS DRIVER
-P: Peter Korsgaard
-M: jacmet@sunsite.dk
+M: Peter Korsgaard <jacmet@sunsite.dk>
L: linux-i2c@vger.kernel.org
S: Maintained
F: Documentation/i2c/busses/i2c-ocores
F: drivers/i2c/busses/i2c-ocores.c
OPROFILE
-P: Robert Richter
-M: robert.richter@amd.com
+M: Robert Richter <robert.richter@amd.com>
L: oprofile-list@lists.sf.net
S: Maintained
F: arch/*/oprofile/
F: include/linux/oprofile.h
ORACLE CLUSTER FILESYSTEM 2 (OCFS2)
-P: Mark Fasheh
-M: mfasheh@suse.com
-P: Joel Becker
-M: joel.becker@oracle.com
+M: Mark Fasheh <mfasheh@suse.com>
+M: Joel Becker <joel.becker@oracle.com>
L: ocfs2-devel@oss.oracle.com (moderated for non-subscribers)
W: http://oss.oracle.com/projects/ocfs2/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2.git
F: fs/ocfs2/
ORINOCO DRIVER
-P: Pavel Roskin
-M: proski@gnu.org
-P: David Gibson
-M: hermes@gibson.dropbear.id.au
+M: Pavel Roskin <proski@gnu.org>
+M: David Gibson <hermes@gibson.dropbear.id.au>
L: linux-wireless@vger.kernel.org
L: orinoco-users@lists.sourceforge.net
L: orinoco-devel@lists.sourceforge.net
F: drivers/net/wireless/orinoco/
OSD LIBRARY and FILESYSTEM
-P: Boaz Harrosh
-M: bharrosh@panasas.com
-P: Benny Halevy
-M: bhalevy@panasas.com
+M: Boaz Harrosh <bharrosh@panasas.com>
+M: Benny Halevy <bhalevy@panasas.com>
L: osd-dev@open-osd.org
W: http://open-osd.org
T: git git://git.open-osd.org/open-osd.git
S: Maintained
F: drivers/scsi/osd/
-F: drivers/include/scsi/osd_*
+F: include/scsi/osd_*
F: fs/exofs/
P54 WIRELESS DRIVER
-P: Michael Wu
-M: flamingice@sourmilk.net
+M: Michael Wu <flamingice@sourmilk.net>
L: linux-wireless@vger.kernel.org
W: http://prism54.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mwu/mac80211-drivers.git
F: drivers/net/wireless/p54/
PA SEMI ETHERNET DRIVER
-P: Olof Johansson
-M: olof@lixom.net
+M: Olof Johansson <olof@lixom.net>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/pasemi_mac.*
PA SEMI SMBUS DRIVER
-P: Olof Johansson
-M: olof@lixom.net
+M: Olof Johansson <olof@lixom.net>
L: linux-i2c@vger.kernel.org
S: Maintained
F: drivers/i2c/busses/i2c-pasemi.c
PANASONIC LAPTOP ACPI EXTRAS DRIVER
-P: Harald Welte
-M: laforge@gnumonks.org
+M: Harald Welte <laforge@gnumonks.org>
S: Maintained
F: drivers/platform/x86/panasonic-laptop.c
PANASONIC MN10300/AM33 PORT
-P: David Howells
-M: dhowells@redhat.com
-P: Koichi Yasutake
-M: yasutake.koichi@jp.panasonic.com
+M: David Howells <dhowells@redhat.com>
+M: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
L: linux-am33-list@redhat.com (moderated for non-subscribers)
W: ftp://ftp.redhat.com/pub/redhat/gnupro/AM33/
S: Maintained
F: include/linux/ppdev.h
PARAVIRT_OPS INTERFACE
-P: Jeremy Fitzhardinge
-M: jeremy@xensource.com
-P: Chris Wright
-M: chrisw@sous-sol.org
-P: Alok Kataria
-M: akataria@vmware.com
-P: Rusty Russell
-M: rusty@rustcorp.com.au
+M: Jeremy Fitzhardinge <jeremy@xensource.com>
+M: Chris Wright <chrisw@sous-sol.org>
+M: Alok Kataria <akataria@vmware.com>
+M: Rusty Russell <rusty@rustcorp.com.au>
L: virtualization@lists.osdl.org
S: Supported
F: Documentation/ia64/paravirt_ops.txt
F: arch/*/include/asm/paravirt.h
PARIDE DRIVERS FOR PARALLEL PORT IDE DEVICES
-P: Tim Waugh
-M: tim@cyberelk.net
+M: Tim Waugh <tim@cyberelk.net>
L: linux-parport@lists.infradead.org (subscribers-only)
W: http://www.torque.net/linux-pp.html
S: Maintained
F: drivers/block/paride/
PARISC ARCHITECTURE
-P: Kyle McMartin
-M: kyle@mcmartin.ca
-P: Helge Deller
-M: deller@gmx.de
+M: Kyle McMartin <kyle@mcmartin.ca>
+M: Helge Deller <deller@gmx.de>
L: linux-parisc@vger.kernel.org
W: http://www.parisc-linux.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6.git
F: drivers/parisc/
PC87360 HARDWARE MONITORING DRIVER
-P: Jim Cromie
-M: jim.cromie@gmail.com
+M: Jim Cromie <jim.cromie@gmail.com>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/pc87360
F: drivers/hwmon/pc87360.c
PC8736x GPIO DRIVER
-P: Jim Cromie
-M: jim.cromie@gmail.com
+M: Jim Cromie <jim.cromie@gmail.com>
S: Maintained
F: drivers/char/pc8736x_gpio.c
PCA9532 LED DRIVER
-P: Riku Voipio
-M: riku.voipio@iki.fi
+M: Riku Voipio <riku.voipio@iki.fi>
S: Maintained
F: drivers/leds/leds-pca9532.c
F: include/linux/leds-pca9532.h
PCI ERROR RECOVERY
-P: Linas Vepstas
-M: linas@austin.ibm.com
+M: Linas Vepstas <linas@austin.ibm.com>
L: linux-pci@vger.kernel.org
S: Supported
F: Documentation/PCI/pci-error-recovery.txt
F: Documentation/powerpc/eeh-pci-error-recovery.txt
PCI SUBSYSTEM
-P: Jesse Barnes
-M: jbarnes@virtuousgeek.org
+M: Jesse Barnes <jbarnes@virtuousgeek.org>
L: linux-pci@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6.git
S: Supported
F: include/linux/pci*
PCIE HOTPLUG DRIVER
-P: Kristen Carlson Accardi
-M: kristen.c.accardi@intel.com
+M: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
L: linux-pci@vger.kernel.org
S: Supported
F: drivers/pci/pcie/
F: include/pcmcia/
PCNET32 NETWORK DRIVER
-P: Don Fry
-M: pcnet32@verizon.net
+M: Don Fry <pcnet32@verizon.net>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/pcnet32.c
PER-TASK DELAY ACCOUNTING
-P: Balbir Singh
-M: balbir@linux.vnet.ibm.com
+M: Balbir Singh <balbir@linux.vnet.ibm.com>
S: Maintained
F: include/linux/delayacct.h
F: kernel/delayacct.c
PERFORMANCE COUNTER SUBSYSTEM
-P: Peter Zijlstra
-M: a.p.zijlstra@chello.nl
-P: Paul Mackerras
-M: paulus@samba.org
-P: Ingo Molnar
-M: mingo@elte.hu
-L: linux-kernel@vger.kernel.org
+M: Peter Zijlstra <a.p.zijlstra@chello.nl>
+M: Paul Mackerras <paulus@samba.org>
+M: Ingo Molnar <mingo@elte.hu>
S: Supported
PERSONALITY HANDLING
-P: Christoph Hellwig
-M: hch@infradead.org
+M: Christoph Hellwig <hch@infradead.org>
L: linux-abi-devel@lists.sourceforge.net
S: Maintained
F: include/linux/personality.h
PHRAM MTD DRIVER
-P: Joern Engel
-M: joern@lazybastard.org
+M: Joern Engel <joern@lazybastard.org>
L: linux-mtd@lists.infradead.org
S: Maintained
F: drivers/mtd/devices/phram.c
PKTCDVD DRIVER
-P: Peter Osterlund
-M: petero2@telia.com
+M: Peter Osterlund <petero2@telia.com>
S: Maintained
F: drivers/block/pktcdvd.c
F: include/linux/pktcdvd.h
POSIX CLOCKS and TIMERS
-P: Thomas Gleixner
-M: tglx@linutronix.de
+M: Thomas Gleixner <tglx@linutronix.de>
S: Supported
F: fs/timerfd.c
F: include/linux/timer*
F: kernel/*timer*
POWER SUPPLY CLASS/SUBSYSTEM and DRIVERS
-P: Anton Vorontsov
-M: cbou@mail.ru
-P: David Woodhouse
-M: dwmw2@infradead.org
+M: Anton Vorontsov <cbou@mail.ru>
+M: David Woodhouse <dwmw2@infradead.org>
T: git git://git.infradead.org/battery-2.6.git
S: Maintained
F: include/linux/power_supply.h
F: drivers/power/power_supply*
PNP SUPPORT
-P: Adam Belay
-M: abelay@mit.edu
-P: Bjorn Helgaas
-M: bjorn.helgaas@hp.com
+M: Adam Belay <abelay@mit.edu>
+M: Bjorn Helgaas <bjorn.helgaas@hp.com>
S: Maintained
F: drivers/pnp/
PNXxxxx I2C DRIVER
-P: Vitaly Wool
-M: vitalywool@gmail.com
+M: Vitaly Wool <vitalywool@gmail.com>
L: linux-i2c@vger.kernel.org
S: Maintained
F: drivers/i2c/busses/i2c-pnx.c
PPP PROTOCOL DRIVERS AND COMPRESSORS
-P: Paul Mackerras
-M: paulus@samba.org
+M: Paul Mackerras <paulus@samba.org>
L: linux-ppp@vger.kernel.org
S: Maintained
F: drivers/net/ppp_*
PPP OVER ATM (RFC 2364)
-P: Mitchell Blank Jr
-M: mitch@sfgoth.com
+M: Mitchell Blank Jr <mitch@sfgoth.com>
S: Maintained
F: net/atm/pppoatm.c
F: include/linux/atmppp.h
PPP OVER ETHERNET
-P: Michal Ostrowski
-M: mostrows@earthlink.net
+M: Michal Ostrowski <mostrows@earthlink.net>
S: Maintained
F: drivers/net/pppoe.c
F: drivers/net/pppox.c
PPP OVER L2TP
-P: James Chapman
-M: jchapman@katalix.com
+M: James Chapman <jchapman@katalix.com>
S: Maintained
F: drivers/net/pppol2tp.c
F: include/linux/if_pppol2tp.h
PPS SUPPORT
-P: Rodolfo Giometti
-M: giometti@enneenne.com
+M: Rodolfo Giometti <giometti@enneenne.com>
W: http://wiki.enneenne.com/index.php/LinuxPPS_support
L: linuxpps@ml.enneenne.com (subscribers-only)
S: Maintained
+F: Documentation/pps/
+F: drivers/pps/
+F: include/linux/pps*.h
PREEMPTIBLE KERNEL
-P: Robert Love
-M: rml@tech9.net
+M: Robert Love <rml@tech9.net>
L: kpreempt-tech@lists.sourceforge.net
W: ftp://ftp.kernel.org/pub/linux/kernel/people/rml/preempt-kernel
S: Supported
F: include/linux/preempt.h
PRISM54 WIRELESS DRIVER
-P: Luis R. Rodriguez
-M: mcgrof@gmail.com
+M: "Luis R. Rodriguez" <mcgrof@gmail.com>
L: linux-wireless@vger.kernel.org
W: http://prism54.org
S: Maintained
F: drivers/net/wireless/prism54/
PROMISE DC4030 CACHING DISK CONTROLLER DRIVER
-P: Peter Denison
-M: promise@pnd-pc.demon.co.uk
+M: Peter Denison <promise@pnd-pc.demon.co.uk>
W: http://www.pnd-pc.demon.co.uk/promise/
S: Maintained
PROMISE SATA TX2/TX4 CONTROLLER LIBATA DRIVER
-P: Mikael Pettersson
-M: mikpe@it.uu.se
+M: Mikael Pettersson <mikpe@it.uu.se>
L: linux-ide@vger.kernel.org
S: Maintained
F: drivers/ata/sata_promise.*
PS3 NETWORK SUPPORT
-P: Geoff Levand
-M: geoffrey.levand@am.sony.com
+M: Geoff Levand <geoffrey.levand@am.sony.com>
L: netdev@vger.kernel.org
L: cbe-oss-dev@ozlabs.org
S: Supported
F: drivers/net/ps3_gelic_net.*
PS3 PLATFORM SUPPORT
-P: Geoff Levand
-M: geoffrey.levand@am.sony.com
+M: Geoff Levand <geoffrey.levand@am.sony.com>
L: linuxppc-dev@ozlabs.org
L: cbe-oss-dev@ozlabs.org
S: Supported
F: sound/ppc/snd_ps3*
PS3VRAM DRIVER
-P: Jim Paris
-M: jim@jtan.com
+M: Jim Paris <jim@jtan.com>
L: cbe-oss-dev@ozlabs.org
S: Maintained
PTRACE SUPPORT
-P: Roland McGrath
-M: roland@redhat.com
-P: Oleg Nesterov
-M: oleg@redhat.com
+M: Roland McGrath <roland@redhat.com>
+M: Oleg Nesterov <oleg@redhat.com>
S: Maintained
F: include/asm-generic/syscall.h
F: include/linux/ptrace.h
F: kernel/ptrace.c
PVRUSB2 VIDEO4LINUX DRIVER
-P: Mike Isely
-M: isely@pobox.com
+M: Mike Isely <isely@pobox.com>
L: pvrusb2@isely.net (subscribers-only)
L: linux-media@vger.kernel.org
W: http://www.isely.net/pvrusb2/
F: drivers/media/video/pvrusb2/
PXA2xx/PXA3xx SUPPORT
-P: Eric Miao
-M: eric.y.miao@gmail.com
-P: Russell King
-M: linux@arm.linux.org.uk
+M: Eric Miao <eric.y.miao@gmail.com>
+M: Russell King <linux@arm.linux.org.uk>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
F: arch/arm/mach-pxa/
F: sound/soc/pxa
PXA168 SUPPORT
-P: Eric Miao
-M: eric.y.miao@gmail.com
-P: Jason Chagas
-M: jason.chagas@marvell.com
+M: Eric Miao <eric.y.miao@gmail.com>
+M: Jason Chagas <jason.chagas@marvell.com>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
S: Maintained
PXA910 SUPPORT
-P: Eric Miao
-M: eric.y.miao@gmail.com
+M: Eric Miao <eric.y.miao@gmail.com>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
S: Maintained
S: Orphan
PXA RTC DRIVER
-P: Robert Jarzmik
-M: robert.jarzmik@free.fr
+M: Robert Jarzmik <robert.jarzmik@free.fr>
L: rtc-linux@googlegroups.com
S: Maintained
QLOGIC QLA2XXX FC-SCSI DRIVER
-P: Andrew Vasquez
+M: Andrew Vasquez <andrew.vasquez@qlogic.com>
M: linux-driver@qlogic.com
L: linux-scsi@vger.kernel.org
S: Supported
F: drivers/scsi/qla2xxx/
QLOGIC QLA3XXX NETWORK DRIVER
-P: Ron Mercer
+M: Ron Mercer <ron.mercer@qlogic.com>
M: linux-driver@qlogic.com
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/qla3xxx.*
QLOGIC QLGE 10Gb ETHERNET DRIVER
-P: Ron Mercer
+M: Ron Mercer <ron.mercer@qlogic.com>
M: linux-driver@qlogic.com
-M: ron.mercer@qlogic.com
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/qlge/
QNX4 FILESYSTEM
-P: Anders Larsen
-M: al@alarsen.net
+M: Anders Larsen <al@alarsen.net>
W: http://www.alarsen.net/linux/qnx4fs/
S: Maintained
F: fs/qnx4/
F: include/linux/qnxtypes.h
RADEON FRAMEBUFFER DISPLAY DRIVER
-P: Benjamin Herrenschmidt
-M: benh@kernel.crashing.org
+M: Benjamin Herrenschmidt <benh@kernel.crashing.org>
L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
S: Maintained
F: drivers/video/aty/radeon*
F: include/linux/radeonfb.h
RAGE128 FRAMEBUFFER DISPLAY DRIVER
-P: Paul Mackerras
-M: paulus@samba.org
+M: Paul Mackerras <paulus@samba.org>
L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
S: Maintained
F: drivers/video/aty/aty128fb.c
F: drivers/net/wireless/rt2x00/
RAMDISK RAM BLOCK DEVICE DRIVER
-P: Nick Piggin
-M: npiggin@suse.de
+M: Nick Piggin <npiggin@suse.de>
S: Maintained
F: Documentation/blockdev/ramdisk.txt
F: drivers/block/brd.c
RANDOM NUMBER DRIVER
-P: Matt Mackall
-M: mpm@selenic.com
+M: Matt Mackall <mpm@selenic.com>
S: Maintained
F: drivers/char/random.c
RAPIDIO SUBSYSTEM
-P: Matt Porter
-M: mporter@kernel.crashing.org
+M: Matt Porter <mporter@kernel.crashing.org>
S: Maintained
F: drivers/rapidio/
RAYLINK/WEBGEAR 802.11 WIRELESS LAN DRIVER
-P: Corey Thomas
-M: coreythomas@charter.net
+M: Corey Thomas <coreythomas@charter.net>
L: linux-wireless@vger.kernel.org
S: Maintained
F: drivers/net/wireless/ray*
RCUTORTURE MODULE
-P: Josh Triplett
-M: josh@freedesktop.org
-P: Paul E. McKenney
-M: paulmck@linux.vnet.ibm.com
+M: Josh Triplett <josh@freedesktop.org>
+M: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
S: Maintained
F: Documentation/RCU/torture.txt
F: kernel/rcutorture.c
RDC R-321X SoC
-P: Florian Fainelli
-M: florian@openwrt.org
+M: Florian Fainelli <florian@openwrt.org>
S: Maintained
RDC R6040 FAST ETHERNET DRIVER
-P: Florian Fainelli
-M: florian@openwrt.org
+M: Florian Fainelli <florian@openwrt.org>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/r6040.c
RDS - RELIABLE DATAGRAM SOCKETS
-P: Andy Grover
-M: andy.grover@oracle.com
+M: Andy Grover <andy.grover@oracle.com>
L: rds-devel@oss.oracle.com (moderated for non-subscribers)
S: Supported
F: net/rds/
READ-COPY UPDATE (RCU)
-P: Dipankar Sarma
-M: dipankar@in.ibm.com
-P: Paul E. McKenney
-M: paulmck@linux.vnet.ibm.com
+M: Dipankar Sarma <dipankar@in.ibm.com>
+M: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
W: http://www.rdrop.com/users/paulmck/rclock/
S: Supported
F: Documentation/RCU/rcu.txt
F: kernel/rcupdate.c
REAL TIME CLOCK DRIVER
-P: Paul Gortmaker
-M: p_gortmaker@yahoo.com
+M: Paul Gortmaker <p_gortmaker@yahoo.com>
S: Maintained
F: Documentation/rtc.txt
F: drivers/rtc/
F: include/linux/rtc.h
REAL TIME CLOCK (RTC) SUBSYSTEM
-P: Alessandro Zummo
-M: a.zummo@towertech.it
+M: Alessandro Zummo <a.zummo@towertech.it>
L: rtc-linux@googlegroups.com
S: Maintained
F: Documentation/rtc.txt
F: fs/reiserfs/
RFKILL
-P: Johannes Berg
-M: johannes@sipsolutions.net
+M: Johannes Berg <johannes@sipsolutions.net>
L: linux-wireless@vger.kernel.org
S: Maintained
F Documentation/rfkill.txt
F: drivers/char/rocket*
ROSE NETWORK LAYER
-P: Ralf Baechle
-M: ralf@linux-mips.org
+M: Ralf Baechle <ralf@linux-mips.org>
L: linux-hams@vger.kernel.org
W: http://www.linux-ax25.org/
S: Maintained
F: net/rose/
RTL8180 WIRELESS DRIVER
-P: John W. Linville
-M: linville@tuxdriver.com
+M: "John W. Linville" <linville@tuxdriver.com>
L: linux-wireless@vger.kernel.org
W: http://linuxwireless.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
F: drivers/net/wireless/rtl818*
RTL8187 WIRELESS DRIVER
-P: Herton Ronaldo Krzesinski
-M: herton@mandriva.com.br
-P: Hin-Tak Leung
-M: htl10@users.sourceforge.net
-P: Larry Finger
-M: Larry.Finger@lwfinger.net
+M: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+M: Hin-Tak Leung <htl10@users.sourceforge.net>
+M: Larry Finger <Larry.Finger@lwfinger.net>
L: linux-wireless@vger.kernel.org
W: http://linuxwireless.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
F: drivers/net/wireless/rtl818x/rtl8187*
S3 SAVAGE FRAMEBUFFER DRIVER
-P: Antonino Daplas
-M: adaplas@gmail.com
+M: Antonino Daplas <adaplas@gmail.com>
L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
S: Maintained
F: drivers/video/savage/
S390
-P: Martin Schwidefsky
-M: schwidefsky@de.ibm.com
-P: Heiko Carstens
-M: heiko.carstens@de.ibm.com
+M: Martin Schwidefsky <schwidefsky@de.ibm.com>
+M: Heiko Carstens <heiko.carstens@de.ibm.com>
M: linux390@de.ibm.com
L: linux-s390@vger.kernel.org
W: http://www.ibm.com/developerworks/linux/linux390/
F: arch/s390/
S390 NETWORK DRIVERS
-P: Ursula Braun
-M: ursula.braun@de.ibm.com
-P: Frank Blaschka
-M: blaschka@linux.vnet.ibm.com
+M: Ursula Braun <ursula.braun@de.ibm.com>
+M: Frank Blaschka <blaschka@linux.vnet.ibm.com>
M: linux390@de.ibm.com
L: linux-s390@vger.kernel.org
W: http://www.ibm.com/developerworks/linux/linux390/
F: drivers/s390/net/
S390 ZCRYPT DRIVER
-P: Felix Beck
-M: felix.beck@de.ibm.com
-P: Ralph Wuerthner
-M: ralph.wuerthner@de.ibm.com
+M: Felix Beck <felix.beck@de.ibm.com>
+M: Ralph Wuerthner <ralph.wuerthner@de.ibm.com>
M: linux390@de.ibm.com
L: linux-s390@vger.kernel.org
S: Supported
F: drivers/s390/crypto/
S390 ZFCP DRIVER
-P: Christof Schmitt
-M: christof.schmitt@de.ibm.com
-P: Martin Peschke
-M: mp3@de.ibm.com
+M: Christof Schmitt <christof.schmitt@de.ibm.com>
+M: Martin Peschke <mp3@de.ibm.com>
M: linux390@de.ibm.com
L: linux-s390@vger.kernel.org
W: http://www.ibm.com/developerworks/linux/linux390/
F: drivers/s390/scsi/zfcp_*
S390 IUCV NETWORK LAYER
-P: Ursula Braun
-M: ursula.braun@de.ibm.com
+M: Ursula Braun <ursula.braun@de.ibm.com>
M: linux390@de.ibm.com
L: linux-s390@vger.kernel.org
W: http://www.ibm.com/developerworks/linux/linux390/
F: net/iucv/
S3C24XX SD/MMC Driver
-P: Ben Dooks
-M: ben-linux@fluff.org
+M: Ben Dooks <ben-linux@fluff.org>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Supported
F: drivers/mmc/host/s3cmci.*
SAA7146 VIDEO4LINUX-2 DRIVER
-P: Michael Hunold
-M: michael@mihu.de
+M: Michael Hunold <michael@mihu.de>
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
W: http://www.mihu.de/linux/saa7146
F: include/media/*7146*
SC1200 WDT DRIVER
-P: Zwane Mwaikambo
-M: zwane@arm.linux.org.uk
+M: Zwane Mwaikambo <zwane@arm.linux.org.uk>
S: Maintained
F: drivers/watchdog/sc1200wdt.c
SCHEDULER
-P: Ingo Molnar
-M: mingo@elte.hu
-P: Peter Zijlstra
-M: peterz@infradead.org
+M: Ingo Molnar <mingo@elte.hu>
+M: Peter Zijlstra <peterz@infradead.org>
S: Maintained
F: kernel/sched*
F: include/linux/sched.h
SCSI CDROM DRIVER
-P: Jens Axboe
-M: axboe@kernel.dk
+M: Jens Axboe <axboe@kernel.dk>
L: linux-scsi@vger.kernel.org
W: http://www.kernel.dk
S: Maintained
F: drivers/scsi/sr*
SCSI SG DRIVER
-P: Doug Gilbert
-M: dgilbert@interlog.com
+M: Doug Gilbert <dgilbert@interlog.com>
L: linux-scsi@vger.kernel.org
W: http://www.torque.net/sg
S: Maintained
F: include/scsi/sg.h
SCSI SUBSYSTEM
-P: James E.J. Bottomley
-M: James.Bottomley@HansenPartnership.com
+M: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
L: linux-scsi@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6.git
F: include/scsi/
SCSI TAPE DRIVER
-P: Kai Mäkisara
-M: Kai.Makisara@kolumbus.fi
+M: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
L: linux-scsi@vger.kernel.org
S: Maintained
F: Documentation/scsi/st.txt
F: drivers/scsi/st*
SCTP PROTOCOL
-P: Vlad Yasevich
-M: vladislav.yasevich@hp.com
-P: Sridhar Samudrala
-M: sri@us.ibm.com
+M: Vlad Yasevich <vladislav.yasevich@hp.com>
+M: Sridhar Samudrala <sri@us.ibm.com>
L: linux-sctp@vger.kernel.org
W: http://lksctp.sourceforge.net
S: Supported
F: net/sctp/
SCx200 CPU SUPPORT
-P: Jim Cromie
-M: jim.cromie@gmail.com
+M: Jim Cromie <jim.cromie@gmail.com>
S: Odd Fixes
F: Documentation/i2c/busses/scx200_acb
F: arch/x86/kernel/scx200_32.c
F: include/linux/scx200.h
SCx200 GPIO DRIVER
-P: Jim Cromie
-M: jim.cromie@gmail.com
+M: Jim Cromie <jim.cromie@gmail.com>
S: Maintained
F: drivers/char/scx200_gpio.c
F: include/linux/scx200_gpio.h
SCx200 HRT CLOCKSOURCE DRIVER
-P: Jim Cromie
-M: jim.cromie@gmail.com
+M: Jim Cromie <jim.cromie@gmail.com>
S: Maintained
F: drivers/clocksource/scx200_hrt.c
SDRICOH_CS MMC/SD HOST CONTROLLER INTERFACE DRIVER
-P: Sascha Sommer
-M: saschasommer@freenet.de
+M: Sascha Sommer <saschasommer@freenet.de>
L: sdricohcs-devel@lists.sourceforge.net (subscribers-only)
S: Maintained
F: drivers/mmc/host/sdricoh_cs.c
SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) DRIVER
-P: Pierre Ossman
-M: pierre@ossman.eu
+M: Pierre Ossman <pierre@ossman.eu>
L: sdhci-devel@lists.ossman.eu
S: Maintained
SECURE DIGITAL HOST CONTROLLER INTERFACE, OPEN FIRMWARE BINDINGS (SDHCI-OF)
-P: Anton Vorontsov
-M: avorontsov@ru.mvista.com
+M: Anton Vorontsov <avorontsov@ru.mvista.com>
L: linuxppc-dev@ozlabs.org
L: sdhci-devel@lists.ossman.eu
S: Maintained
F: drivers/mmc/host/sdhci.*
SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) SAMSUNG DRIVER
-P: Ben Dooks
-M: ben-linux@fluff.org
+M: Ben Dooks <ben-linux@fluff.org>
L: sdhci-devel@lists.ossman.eu
S: Maintained
F: drivers/mmc/host/sdhci-s3c.c
SECURITY SUBSYSTEM
-P: James Morris
-M: jmorris@namei.org
+M: James Morris <jmorris@namei.org>
L: linux-security-module@vger.kernel.org (suggested Cc:)
T: git git://www.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
W: http://security.wiki.kernel.org/
F: security/
SECURITY CONTACT
-P: Security Officers
-M: security@kernel.org
+M: Security Officers <security@kernel.org>
S: Supported
SELINUX SECURITY MODULE
-P: Stephen Smalley
-M: sds@tycho.nsa.gov
-P: James Morris
-M: jmorris@namei.org
-P: Eric Paris
-M: eparis@parisplace.org
+M: Stephen Smalley <sds@tycho.nsa.gov>
+M: James Morris <jmorris@namei.org>
+M: Eric Paris <eparis@parisplace.org>
L: selinux@tycho.nsa.gov (subscribers-only, general discussion)
W: http://selinuxproject.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
F: security/selinux/
SENSABLE PHANTOM
-P: Jiri Slaby
-M: jirislaby@gmail.com
+M: Jiri Slaby <jirislaby@gmail.com>
S: Maintained
F: drivers/misc/phantom.c
F: include/linux/phantom.h
SERIAL ATA (SATA) SUBSYSTEM
-P: Jeff Garzik
-M: jgarzik@pobox.com
+M: Jeff Garzik <jgarzik@pobox.com>
L: linux-ide@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
S: Supported
F: include/linux/libata.h
SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER
-P: Sathya Perla
-M: sathyap@serverengines.com
-P: Subbu Seetharaman
-M: subbus@serverengines.com
+M: Sathya Perla <sathyap@serverengines.com>
+M: Subbu Seetharaman <subbus@serverengines.com>
L: netdev@vger.kernel.org
W: http://www.serverengines.com
S: Supported
SFC NETWORK DRIVER
P: Steve Hodgson
P: Ben Hutchings
-P: Robert Stonehouse
-M: linux-net-drivers@solarflare.com
+M: Robert Stonehouse <linux-net-drivers@solarflare.com>
S: Supported
F: drivers/net/sfc/
SGI GRU DRIVER
-P: Jack Steiner
-M: steiner@sgi.com
+M: Jack Steiner <steiner@sgi.com>
S: Maintained
F: drivers/misc/sgi-gru/
SGI SN-IA64 (Altix) SERIAL CONSOLE DRIVER
-P: Pat Gefre
-M: pfg@sgi.com
+M: Pat Gefre <pfg@sgi.com>
L: linux-ia64@vger.kernel.org
S: Supported
F: Documentation/ia64/serial.txt
F: include/linux/ioc?.h
SGI VISUAL WORKSTATION 320 AND 540
-P: Andrey Panin
-M: pazke@donpac.ru
+M: Andrey Panin <pazke@donpac.ru>
L: linux-visws-devel@lists.sf.net
W: http://linux-visws.sf.net
S: Maintained for 2.6.
F: Documentation/sgi-visws.txt
SGI XP/XPC/XPNET DRIVER
-P: Robin Holt
-M: holt@sgi.com
+M: Robin Holt <holt@sgi.com>
S: Maintained
F: drivers/misc/sgi-xp/
SHARP LH SUPPORT (LH7952X & LH7A40X)
-P: Marc Singer
-M: elf@buici.com
+M: Marc Singer <elf@buici.com>
W: http://projects.buici.com/arm
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
F: drivers/usb/host/ohci-lh7a40*
SHPC HOTPLUG DRIVER
-P: Kristen Carlson Accardi
-M: kristen.c.accardi@intel.com
+M: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
L: linux-pci@vger.kernel.org
S: Supported
F: drivers/pci/hotplug/shpchp*
SIMTEC EB110ATX (Chalice CATS)
P: Ben Dooks
-P: Vincent Sanders
-M: support@simtec.co.uk
+M: Vincent Sanders <support@simtec.co.uk>
W: http://www.simtec.co.uk/products/EB110ATX/
S: Supported
SIMTEC EB2410ITX (BAST)
P: Ben Dooks
-P: Vincent Sanders
-M: support@simtec.co.uk
+M: Vincent Sanders <support@simtec.co.uk>
W: http://www.simtec.co.uk/products/EB2410ITX/
S: Supported
F: arch/arm/mach-s3c2410/
F: drivers/*/*/*s3c2410*
SIS 190 ETHERNET DRIVER
-P: Francois Romieu
-M: romieu@fr.zoreil.com
+M: Francois Romieu <romieu@fr.zoreil.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/sis190.c
SIS 900/7016 FAST ETHERNET DRIVER
-P: Daniele Venzano
-M: venza@brownhat.org
+M: Daniele Venzano <venza@brownhat.org>
W: http://www.brownhat.org/sis900.html
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/sis900.*
SIS 96X I2C/SMBUS DRIVER
-P: Mark M. Hoffman
-M: mhoffman@lightlink.com
+M: "Mark M. Hoffman" <mhoffman@lightlink.com>
L: linux-i2c@vger.kernel.org
S: Maintained
F: Documentation/i2c/busses/i2c-sis96x
F: drivers/i2c/busses/i2c-sis96x.c
SIS FRAMEBUFFER DRIVER
-P: Thomas Winischhofer
-M: thomas@winischhofer.net
+M: Thomas Winischhofer <thomas@winischhofer.net>
W: http://www.winischhofer.net/linuxsisvga.shtml
S: Maintained
F: Documentation/fb/sisfb.txt
F: include/video/sisfb.h
SIS USB2VGA DRIVER
-P: Thomas Winischhofer
-M: thomas@winischhofer.net
+M: Thomas Winischhofer <thomas@winischhofer.net>
W: http://www.winischhofer.at/linuxsisusbvga.shtml
S: Maintained
F: drivers/usb/misc/sisusbvga/
SKGE, SKY2 10/100/1000 GIGABIT ETHERNET DRIVERS
-P: Stephen Hemminger
-M: shemminger@linux-foundation.org
+M: Stephen Hemminger <shemminger@linux-foundation.org>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/skge.*
F: drivers/net/sky2.*
SLAB ALLOCATOR
-P: Christoph Lameter
-M: cl@linux-foundation.org
-P: Pekka Enberg
-M: penberg@cs.helsinki.fi
-P: Matt Mackall
-M: mpm@selenic.com
+M: Christoph Lameter <cl@linux-foundation.org>
+M: Pekka Enberg <penberg@cs.helsinki.fi>
+M: Matt Mackall <mpm@selenic.com>
L: linux-mm@kvack.org
S: Maintained
F: include/linux/sl?b*.h
F: mm/sl?b.c
SMC91x ETHERNET DRIVER
-P: Nicolas Pitre
-M: nico@cam.org
+M: Nicolas Pitre <nico@cam.org>
S: Maintained
F: drivers/net/smc91x.*
SMSC47B397 HARDWARE MONITOR DRIVER
-P: Mark M. Hoffman
-M: mhoffman@lightlink.com
+M: "Mark M. Hoffman" <mhoffman@lightlink.com>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/smsc47b397
F: drivers/hwmon/smsc47b397.c
SMSC911x ETHERNET DRIVER
-P: Steve Glendinning
-M: steve.glendinning@smsc.com
+M: Steve Glendinning <steve.glendinning@smsc.com>
L: netdev@vger.kernel.org
S: Supported
F: include/linux/smsc911x.h
F: drivers/net/smsc911x.*
SMSC9420 PCI ETHERNET DRIVER
-P: Steve Glendinning
-M: steve.glendinning@smsc.com
+M: Steve Glendinning <steve.glendinning@smsc.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/smsc9420.*
SMX UIO Interface
-P: Ben Nizette
-M: bn@niasdigital.com
+M: Ben Nizette <bn@niasdigital.com>
S: Maintained
F: drivers/uio/uio_smx.c
SN-IA64 (Itanium) SUB-PLATFORM
-P: Jes Sorensen
-M: jes@sgi.com
+M: Jes Sorensen <jes@sgi.com>
L: linux-altix@sgi.com
L: linux-ia64@vger.kernel.org
W: http://www.sgi.com/altix
F: arch/ia64/sn/
SOC-CAMERA V4L2 SUBSYSTEM
-P: Guennadi Liakhovetski
-M: g.liakhovetski@gmx.de
+M: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
F: drivers/media/video/v4l2*
SOEKRIS NET48XX LED SUPPORT
-P: Chris Boot
-M: bootc@bootc.net
+M: Chris Boot <bootc@bootc.net>
S: Maintained
F: drivers/leds/leds-net48xx.c
SOFTWARE RAID (Multiple Disks) SUPPORT
-P: Neil Brown
-M: neilb@suse.de
+M: Neil Brown <neilb@suse.de>
L: linux-raid@vger.kernel.org
S: Supported
F: drivers/md/
F: include/linux/raid/
SONIC NETWORK DRIVER
-P: Thomas Bogendoerfer
-M: tsbogend@alpha.franken.de
+M: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/sonic.*
SONICS SILICON BACKPLANE DRIVER (SSB)
-P: Michael Buesch
-M: mb@bu3sch.de
+M: Michael Buesch <mb@bu3sch.de>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/ssb/
F: include/linux/ssb/
SONY VAIO CONTROL DEVICE DRIVER
-P: Mattia Dongili
-M: malattia@linux.it
+M: Mattia Dongili <malattia@linux.it>
L: linux-acpi@vger.kernel.org
W: http://www.linux.it/~malattia/wiki/index.php/Sony_drivers
S: Maintained
F: include/linux/sony-laptop.h
SONY MEMORYSTICK CARD SUPPORT
-P: Alex Dubov
-M: oakad@yahoo.com
+M: Alex Dubov <oakad@yahoo.com>
W: http://tifmxx.berlios.de/
S: Maintained
F: drivers/memstick/host/tifm_ms.c
SOUND
-P: Jaroslav Kysela
-M: perex@perex.cz
-P: Takashi Iwai
-M: tiwai@suse.de
+M: Jaroslav Kysela <perex@perex.cz>
+M: Takashi Iwai <tiwai@suse.de>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
W: http://www.alsa-project.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
F: sound/
SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
-P: Liam Girdwood
-M: lrg@slimlogic.co.uk
-P: Mark Brown
-M: broonie@opensource.wolfsonmicro.com
+M: Liam Girdwood <lrg@slimlogic.co.uk>
+M: Mark Brown <broonie@opensource.wolfsonmicro.com>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
W: http://alsa-project.org/main/index.php/ASoC
F: include/sound/soc*
SPARC + UltraSPARC (sparc/sparc64)
-P: David S. Miller
-M: davem@davemloft.net
+M: "David S. Miller" <davem@davemloft.net>
L: sparclinux@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6.git
F: arch/sparc/
SPECIALIX IO8+ MULTIPORT SERIAL CARD DRIVER
-P: Roger Wolff
-M: R.E.Wolff@BitWizard.nl
+M: Roger Wolff <R.E.Wolff@BitWizard.nl>
S: Supported
F: Documentation/serial/specialix.txt
F: drivers/char/specialix*
SPI SUBSYSTEM
-P: David Brownell
-M: dbrownell@users.sourceforge.net
+M: David Brownell <dbrownell@users.sourceforge.net>
L: spi-devel-general@lists.sourceforge.net
S: Maintained
F: Documentation/spi/
F: include/linux/spi/
SPIDERNET NETWORK DRIVER for CELL
-P: Ishizaki Kou
-M: kou.ishizaki@toshiba.co.jp
-P: Jens Osterkamp
-M: jens@de.ibm.com
+M: Ishizaki Kou <kou.ishizaki@toshiba.co.jp>
+M: Jens Osterkamp <jens@de.ibm.com>
L: netdev@vger.kernel.org
S: Supported
F: Documentation/networking/spider_net.txt
F: drivers/net/spider_net*
SPU FILE SYSTEM
-P: Jeremy Kerr
-M: jk@ozlabs.org
+M: Jeremy Kerr <jk@ozlabs.org>
L: linuxppc-dev@ozlabs.org
L: cbe-oss-dev@ozlabs.org
W: http://www.ibm.com/developerworks/power/cell/
F: arch/powerpc/platforms/cell/spufs/
SQUASHFS FILE SYSTEM
-P: Phillip Lougher
-M: phillip@lougher.demon.co.uk
+M: Phillip Lougher <phillip@lougher.demon.co.uk>
L: squashfs-devel@lists.sourceforge.net (subscribers-only)
W: http://squashfs.org.uk
S: Maintained
F: fs/squashfs/
SRM (Alpha) environment access
-P: Jan-Benedict Glaw
-M: jbglaw@lug-owl.de
+M: Jan-Benedict Glaw <jbglaw@lug-owl.de>
S: Maintained
F: arch/alpha/kernel/srm_env.c
STABLE BRANCH
-P: Greg Kroah-Hartman
-M: greg@kroah.com
-P: Chris Wright
-M: chrisw@sous-sol.org
+M: Greg Kroah-Hartman <greg@kroah.com>
+M: Chris Wright <chrisw@sous-sol.org>
L: stable@kernel.org
S: Maintained
STAGING SUBSYSTEM
-P: Greg Kroah-Hartman
-M: gregkh@suse.de
+M: Greg Kroah-Hartman <gregkh@suse.de>
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
L: devel@driverdev.osuosl.org
S: Maintained
F: drivers/staging/
STARFIRE/DURALAN NETWORK DRIVER
-P: Ion Badulescu
-M: ionut@badula.org
+M: Ion Badulescu <ionut@badula.org>
S: Odd Fixes
F: drivers/net/starfire*
STARMODE RADIO IP (STRIP) PROTOCOL DRIVER
-W: http://mosquitonet.Stanford.EDU/strip.html
S: Orphan
F: drivers/net/wireless/strip.c
F: include/linux/if_strip.h
STRADIS MPEG-2 DECODER DRIVER
-P: Nathan Laredo
-M: laredo@gnu.org
+M: Nathan Laredo <laredo@gnu.org>
W: http://www.stradis.com/
S: Maintained
F: drivers/media/video/stradis.c
SUN3/3X
-P: Sam Creasey
-M: sammy@sammy.net
+M: Sam Creasey <sammy@sammy.net>
W: http://sammy.net/sun3/
S: Maintained
F: arch/m68k/kernel/*sun3*
F: arch/m68k/include/asm/sun3*
SUPERH
-P: Paul Mundt
-M: lethal@linux-sh.org
+M: Paul Mundt <lethal@linux-sh.org>
L: linux-sh@vger.kernel.org
W: http://www.linux-sh.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.git
F: drivers/sh/
SUSPEND TO RAM
-P: Len Brown
-M: len.brown@intel.com
-P: Pavel Machek
-M: pavel@ucw.cz
-P: Rafael J. Wysocki
-M: rjw@sisk.pl
+M: Len Brown <len.brown@intel.com>
+M: Pavel Machek <pavel@ucw.cz>
+M: "Rafael J. Wysocki" <rjw@sisk.pl>
L: linux-pm@lists.linux-foundation.org
S: Supported
F: Documentation/power/
F: include/linux/pm.h
SVGA HANDLING
-P: Martin Mares
-M: mj@ucw.cz
+M: Martin Mares <mj@ucw.cz>
L: linux-video@atrey.karlin.mff.cuni.cz
S: Maintained
F: Documentation/svga.txt
F: arch/x86/boot/video*
SYSV FILESYSTEM
-P: Christoph Hellwig
-M: hch@infradead.org
+M: Christoph Hellwig <hch@infradead.org>
S: Maintained
F: Documentation/filesystems/sysv-fs.txt
F: fs/sysv/
F: include/linux/sysv_fs.h
TASKSTATS STATISTICS INTERFACE
-P: Balbir Singh
-M: balbir@linux.vnet.ibm.com
+M: Balbir Singh <balbir@linux.vnet.ibm.com>
S: Maintained
F: Documentation/accounting/taskstats*
F: include/linux/taskstats*
F: kernel/taskstats.c
TC CLASSIFIER
-P: Jamal Hadi Salim
-M: hadi@cyberus.ca
+M: Jamal Hadi Salim <hadi@cyberus.ca>
L: netdev@vger.kernel.org
S: Maintained
F: include/linux/pkt_cls.h
F: net/sched/
TCP LOW PRIORITY MODULE
-P: Wong Hoi Sing, Edison
-M: hswong3i@gmail.com
-P: Hung Hing Lun, Mike
-M: hlhung3i@gmail.com
+M: "Wong Hoi Sing, Edison" <hswong3i@gmail.com>
+M: "Hung Hing Lun, Mike" <hlhung3i@gmail.com>
W: http://tcp-lp-mod.sourceforge.net/
S: Maintained
F: net/ipv4/tcp_lp.c
TEHUTI ETHERNET DRIVER
-P: Alexander Indenbaum
-M: baum@tehutinetworks.net
-P: Andy Gospodarek
-M: andy@greyhouse.net
+M: Alexander Indenbaum <baum@tehutinetworks.net>
+M: Andy Gospodarek <andy@greyhouse.net>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/tehuti*
Telecom Clock Driver for MCPL0010
-P: Mark Gross
-M: mark.gross@intel.com
+M: Mark Gross <mark.gross@intel.com>
S: Supported
F: drivers/char/tlclk.c
TENSILICA XTENSA PORT (xtensa)
-P: Chris Zankel
-M: chris@zankel.net
+M: Chris Zankel <chris@zankel.net>
S: Maintained
F: arch/xtensa/
THINKPAD ACPI EXTRAS DRIVER
-P: Henrique de Moraes Holschuh
-M: ibm-acpi@hmh.eng.br
+M: Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br>
L: ibm-acpi-devel@lists.sourceforge.net
W: http://ibm-acpi.sourceforge.net
W: http://thinkwiki.org/wiki/Ibm-acpi
F: drivers/platform/x86/thinkpad_acpi.c
TI FLASH MEDIA INTERFACE DRIVER
-P: Alex Dubov
-M: oakad@yahoo.com
+M: Alex Dubov <oakad@yahoo.com>
S: Maintained
F: drivers/misc/tifm*
F: drivers/mmc/host/tifm_sd.c
F: include/linux/tifm.h
TI TWL4030 SERIES SOC CODEC DRIVER
-P: Peter Ujfalusi
-M: peter.ujfalusi@nokia.com
+M: Peter Ujfalusi <peter.ujfalusi@nokia.com>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Maintained
F: sound/soc/codecs/twl4030*
TIPC NETWORK LAYER
-P: Per Liden
-M: per.liden@ericsson.com
-P: Jon Maloy
-M: jon.maloy@ericsson.com
-P: Allan Stephens
-M: allan.stephens@windriver.com
+M: Per Liden <per.liden@ericsson.com>
+M: Jon Maloy <jon.maloy@ericsson.com>
+M: Allan Stephens <allan.stephens@windriver.com>
L: tipc-discussion@lists.sourceforge.net
W: http://tipc.sourceforge.net/
W: http://tipc.cslab.ericsson.net/
F: net/tipc/
TLAN NETWORK DRIVER
-P: Samuel Chessman
-M: chessman@tux.org
+M: Samuel Chessman <chessman@tux.org>
L: tlan-devel@lists.sourceforge.net (subscribers-only)
W: http://sourceforge.net/projects/tlan/
S: Maintained
F: drivers/net/tlan.*
TOMOYO SECURITY MODULE
-P: Kentaro Takeda
-M: takedakn@nttdata.co.jp
-P: Tetsuo Handa
-M: penguin-kernel@I-love.SAKURA.ne.jp
+M: Kentaro Takeda <takedakn@nttdata.co.jp>
+M: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
L: tomoyo-users-en@lists.sourceforge.jp (subscribers-only, for developers and users in English)
L: tomoyo-dev@lists.sourceforge.jp (subscribers-only, for developers in Japanese)
L: tomoyo-users@lists.sourceforge.jp (subscribers-only, for users in Japanese)
F: drivers/platform/x86/toshiba_acpi.c
TOSHIBA SMM DRIVER
-P: Jonathan Buzzard
-M: jonathan@buzzard.org.uk
+M: Jonathan Buzzard <jonathan@buzzard.org.uk>
L: tlinux-users@tce.toshiba-dme.co.jp
W: http://www.buzzard.org.uk/toshiba/
S: Maintained
F: include/linux/toshiba.h
TMIO MMC DRIVER
-P: Ian Molton
-M: ian@mnementh.co.uk
+M: Ian Molton <ian@mnementh.co.uk>
S: Maintained
F: drivers/mmc/host/tmio_mmc.*
TMPFS (SHMEM FILESYSTEM)
-P: Hugh Dickins
-M: hugh.dickins@tiscali.co.uk
+M: Hugh Dickins <hugh.dickins@tiscali.co.uk>
L: linux-mm@kvack.org
S: Maintained
F: include/linux/shmem_fs.h
F: mm/shmem.c
TPM DEVICE DRIVER
-P: Debora Velarde
-M: debora@linux.vnet.ibm.com
-P: Rajiv Andrade
-M: srajiv@linux.vnet.ibm.com
+M: Debora Velarde <debora@linux.vnet.ibm.com>
+M: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
W: http://tpmdd.sourceforge.net
-P: Marcel Selhorst
-M: m.selhorst@sirrix.com
+M: Marcel Selhorst <m.selhorst@sirrix.com>
W: http://www.sirrix.com
L: tpmdd-devel@lists.sourceforge.net (moderated for non-subscribers)
S: Maintained
F: drivers/char/tpm/
TRIVIAL PATCHES
-P: Jiri Kosina
-M: trivial@kernel.org
+M: Jiri Kosina <trivial@kernel.org>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial.git
S: Maintained
TTY LAYER
-P: Alan Cox
-M: alan@lxorguk.ukuu.org.uk
+M: Greg Kroah-Hartman <gregkh@suse.de>
S: Maintained
-T: stgit http://zeniv.linux.org.uk/~alan/ttydev/
+T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
F: drivers/char/tty_*
F: drivers/serial/serial_core.c
F: include/linux/serial_core.h
F: include/linux/tty.h
TULIP NETWORK DRIVERS
-P: Grant Grundler
-M: grundler@parisc-linux.org
-P: Kyle McMartin
-M: kyle@mcmartin.ca
+M: Grant Grundler <grundler@parisc-linux.org>
+M: Kyle McMartin <kyle@mcmartin.ca>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/tulip/
TUN/TAP driver
-P: Maxim Krasnyansky
-M: maxk@qualcomm.com
+M: Maxim Krasnyansky <maxk@qualcomm.com>
L: vtun@office.satix.net
W: http://vtun.sourceforge.net/tun
S: Maintained
F: arch/um/os-Linux/drivers/
TURBOCHANNEL SUBSYSTEM
-P: Maciej W. Rozycki
-M: macro@linux-mips.org
+M: "Maciej W. Rozycki" <macro@linux-mips.org>
S: Maintained
F: drivers/tc/
F: include/linux/tc.h
U14-34F SCSI DRIVER
-P: Dario Ballabio
-M: ballabio_dario@emc.com
+M: Dario Ballabio <ballabio_dario@emc.com>
L: linux-scsi@vger.kernel.org
S: Maintained
F: drivers/scsi/u14-34f.c
UBI FILE SYSTEM (UBIFS)
-P: Artem Bityutskiy
-M: dedekind@infradead.org
-P: Adrian Hunter
-M: adrian.hunter@nokia.com
+M: Artem Bityutskiy <dedekind@infradead.org>
+M: Adrian Hunter <adrian.hunter@nokia.com>
L: linux-mtd@lists.infradead.org
T: git git://git.infradead.org/ubifs-2.6.git
W: http://www.linux-mtd.infradead.org/doc/ubifs.html
F: fs/ubifs/
UCLINUX (AND M68KNOMMU)
-P: Greg Ungerer
-M: gerg@uclinux.org
+M: Greg Ungerer <gerg@uclinux.org>
W: http://www.uclinux.org/
L: uclinux-dev@uclinux.org (subscribers-only)
S: Maintained
F: arch/m68knommu/
UCLINUX FOR RENESAS H8/300 (H8300)
-P: Yoshinori Sato
-M: ysato@users.sourceforge.jp
+M: Yoshinori Sato <ysato@users.sourceforge.jp>
W: http://uclinux-h8.sourceforge.jp/
S: Supported
UDF FILESYSTEM
-P: Jan Kara
-M: jack@suse.cz
+M: Jan Kara <jack@suse.cz>
W: http://linux-udf.sourceforge.net
S: Maintained
F: Documentation/filesystems/udf.txt
F: fs/udf/
UFS FILESYSTEM
-P: Evgeniy Dushistov
-M: dushistov@mail.ru
+M: Evgeniy Dushistov <dushistov@mail.ru>
S: Maintained
F: Documentation/filesystems/ufs.txt
F: fs/ufs/
ULTRA-WIDEBAND (UWB) SUBSYSTEM:
-P: David Vrabel
-M: david.vrabel@csr.com
+M: David Vrabel <david.vrabel@csr.com>
L: linux-usb@vger.kernel.org
S: Supported
F: drivers/uwb/*
F: include/linux/uwb/
UNIFORM CDROM DRIVER
-P: Jens Axboe
-M: axboe@kernel.dk
+M: Jens Axboe <axboe@kernel.dk>
W: http://www.kernel.dk
S: Maintained
F: Documentation/cdrom/
F: include/linux/cdrom.h
UNSORTED BLOCK IMAGES (UBI)
-P: Artem Bityutskiy
-M: dedekind@infradead.org
+M: Artem Bityutskiy <dedekind@infradead.org>
W: http://www.linux-mtd.infradead.org/
L: linux-mtd@lists.infradead.org
T: git git://git.infradead.org/ubi-2.6.git
F: include/mtd/ubi-user.h
USB ACM DRIVER
-P: Oliver Neukum
-M: oliver@neukum.name
+M: Oliver Neukum <oliver@neukum.name>
L: linux-usb@vger.kernel.org
S: Maintained
F: Documentation/usb/acm.txt
F: drivers/usb/class/cdc-acm.*
USB BLOCK DRIVER (UB ub)
-P: Pete Zaitcev
-M: zaitcev@redhat.com
+M: Pete Zaitcev <zaitcev@redhat.com>
L: linux-usb@vger.kernel.org
S: Supported
F: drivers/block/ub.c
USB CDC ETHERNET DRIVER
-P: Greg Kroah-Hartman
-M: greg@kroah.com
+M: Greg Kroah-Hartman <greg@kroah.com>
L: linux-usb@vger.kernel.org
S: Maintained
W: http://www.kroah.com/linux-usb/
F: include/linux/usb/cdc.h
USB CYPRESS C67X00 DRIVER
-P: Peter Korsgaard
-M: jacmet@sunsite.dk
+M: Peter Korsgaard <jacmet@sunsite.dk>
L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/c67x00/
USB DAVICOM DM9601 DRIVER
-P: Peter Korsgaard
-M: jacmet@sunsite.dk
+M: Peter Korsgaard <jacmet@sunsite.dk>
L: netdev@vger.kernel.org
W: http://www.linux-usb.org/usbnet
S: Maintained
F: drivers/net/usb/dm9601.c
USB DIAMOND RIO500 DRIVER
-P: Cesar Miquel
-M: miquel@df.uba.ar
+M: Cesar Miquel <miquel@df.uba.ar>
L: rio500-users@lists.sourceforge.net
W: http://rio500.sourceforge.net
S: Maintained
F: drivers/usb/misc/rio500*
USB EHCI DRIVER
-P: David Brownell
-M: dbrownell@users.sourceforge.net
+M: David Brownell <dbrownell@users.sourceforge.net>
L: linux-usb@vger.kernel.org
S: Odd Fixes
F: Documentation/usb/ehci.txt
F: drivers/usb/host/ehci*
USB ET61X[12]51 DRIVER
-P: Luca Risolia
-M: luca.risolia@studio.unibo.it
+M: Luca Risolia <luca.risolia@studio.unibo.it>
L: linux-usb@vger.kernel.org
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
F: drivers/media/video/et61x251/
USB GADGET/PERIPHERAL SUBSYSTEM
-P: David Brownell
-M: dbrownell@users.sourceforge.net
+M: David Brownell <dbrownell@users.sourceforge.net>
L: linux-usb@vger.kernel.org
W: http://www.linux-usb.org/gadget
S: Maintained
F: include/linux/usb/gadget*
USB HID/HIDBP DRIVERS (USB KEYBOARDS, MICE, REMOTE CONTROLS, ...)
-P: Jiri Kosina
-M: jkosina@suse.cz
+M: Jiri Kosina <jkosina@suse.cz>
L: linux-usb@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git
S: Maintained
F: drivers/hid/usbhid/
USB ISP116X DRIVER
-P: Olav Kongas
-M: ok@artecdesign.ee
+M: Olav Kongas <ok@artecdesign.ee>
L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/host/isp116x*
F: include/linux/usb/isp116x.h
USB KAWASAKI LSI DRIVER
-P: Oliver Neukum
-M: oliver@neukum.name
+M: Oliver Neukum <oliver@neukum.name>
L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/serial/kl5kusb105.*
USB MASS STORAGE DRIVER
-P: Matthew Dharm
-M: mdharm-usb@one-eyed-alien.net
+M: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
L: linux-usb@vger.kernel.org
L: usb-storage@lists.one-eyed-alien.net
S: Maintained
F: drivers/usb/storage/
USB OHCI DRIVER
-P: David Brownell
-M: dbrownell@users.sourceforge.net
+M: David Brownell <dbrownell@users.sourceforge.net>
L: linux-usb@vger.kernel.org
S: Odd Fixes
F: Documentation/usb/ohci.txt
F: drivers/usb/host/ohci*
USB OPTION-CARD DRIVER
-P: Matthias Urlichs
-M: smurf@smurf.noris.de
+M: Matthias Urlichs <smurf@smurf.noris.de>
L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/serial/option.c
USB OV511 DRIVER
-P: Mark McClelland
-M: mmcclell@bigfoot.com
+M: Mark McClelland <mmcclell@bigfoot.com>
L: linux-usb@vger.kernel.org
W: http://alpha.dyndns.org/ov511/
S: Maintained
F: drivers/media/video/ov511.*
USB PEGASUS DRIVER
-P: Petko Manolov
-M: petkan@users.sourceforge.net
+M: Petko Manolov <petkan@users.sourceforge.net>
L: linux-usb@vger.kernel.org
L: netdev@vger.kernel.org
W: http://pegasus2.sourceforge.net/
F: drivers/net/usb/pegasus.*
USB PRINTER DRIVER (usblp)
-P: Pete Zaitcev
-M: zaitcev@redhat.com
+M: Pete Zaitcev <zaitcev@redhat.com>
L: linux-usb@vger.kernel.org
S: Supported
F: drivers/usb/class/usblp.c
USB RTL8150 DRIVER
-P: Petko Manolov
-M: petkan@users.sourceforge.net
+M: Petko Manolov <petkan@users.sourceforge.net>
L: linux-usb@vger.kernel.org
L: netdev@vger.kernel.org
W: http://pegasus2.sourceforge.net/
F: drivers/net/usb/rtl8150.c
USB SE401 DRIVER
-P: Jeroen Vreeken
-M: pe1rxq@amsat.org
+M: Jeroen Vreeken <pe1rxq@amsat.org>
L: linux-usb@vger.kernel.org
W: http://www.chello.nl/~j.vreeken/se401/
S: Maintained
F: drivers/media/video/se401.*
USB SERIAL BELKIN F5U103 DRIVER
-P: William Greathouse
-M: wgreathouse@smva.com
+M: William Greathouse <wgreathouse@smva.com>
L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/serial/belkin_sa.*
USB SERIAL CYPRESS M8 DRIVER
-P: Lonnie Mendez
-M: dignome@gmail.com
+M: Lonnie Mendez <dignome@gmail.com>
L: linux-usb@vger.kernel.org
S: Maintained
W: http://geocities.com/i0xox0i
F: drivers/usb/serial/cypress_m8.*
USB SERIAL CYBERJACK DRIVER
-P: Matthias Bruestle and Harald Welte
-M: support@reiner-sct.com
+M: Matthias Bruestle and Harald Welte <support@reiner-sct.com>
W: http://www.reiner-sct.de/support/treiber_cyberjack.php
S: Maintained
F: drivers/usb/serial/cyberjack.c
USB SERIAL DIGI ACCELEPORT DRIVER
-P: Peter Berger and Al Borchers
-M: pberger@brimson.com
-M: alborchers@steinerpoint.com
+M: Peter Berger <pberger@brimson.com>
+M: Al Borchers <alborchers@steinerpoint.com>
L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/serial/digi_acceleport.c
USB SERIAL DRIVER
-P: Greg Kroah-Hartman
-M: gregkh@suse.de
+M: Greg Kroah-Hartman <gregkh@suse.de>
L: linux-usb@vger.kernel.org
S: Supported
F: Documentation/usb/usb-serial.txt
F: include/linux/usb/serial.h
USB SERIAL EMPEG EMPEG-CAR MARK I/II DRIVER
-P: Gary Brubaker
-M: xavyer@ix.netcom.com
+M: Gary Brubaker <xavyer@ix.netcom.com>
L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/serial/empeg.c
USB SERIAL KEYSPAN DRIVER
-P: Greg Kroah-Hartman
-M: greg@kroah.com
+M: Greg Kroah-Hartman <greg@kroah.com>
L: linux-usb@vger.kernel.org
W: http://www.kroah.com/linux/
S: Maintained
F: drivers/usb/serial/*keyspan*
USB SERIAL WHITEHEAT DRIVER
-P: Support Department
-M: support@connecttech.com
+M: Support Department <support@connecttech.com>
L: linux-usb@vger.kernel.org
W: http://www.connecttech.com
S: Supported
F: drivers/usb/serial/whiteheat*
USB SMSC95XX ETHERNET DRIVER
-P: Steve Glendinning
-M: steve.glendinning@smsc.com
+M: Steve Glendinning <steve.glendinning@smsc.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/usb/smsc95xx.*
USB SN9C1xx DRIVER
-P: Luca Risolia
-M: luca.risolia@studio.unibo.it
+M: Luca Risolia <luca.risolia@studio.unibo.it>
L: linux-usb@vger.kernel.org
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
F: drivers/media/video/sn9c102/
USB SUBSYSTEM
-P: Greg Kroah-Hartman
-M: gregkh@suse.de
+M: Greg Kroah-Hartman <gregkh@suse.de>
L: linux-usb@vger.kernel.org
W: http://www.linux-usb.org
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
F: include/linux/usb/
USB UHCI DRIVER
-P: Alan Stern
-M: stern@rowland.harvard.edu
+M: Alan Stern <stern@rowland.harvard.edu>
L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/host/uhci*
USB "USBNET" DRIVER FRAMEWORK
-P: David Brownell
-M: dbrownell@users.sourceforge.net
+M: David Brownell <dbrownell@users.sourceforge.net>
L: netdev@vger.kernel.org
W: http://www.linux-usb.org/usbnet
S: Maintained
F: include/linux/usb/usbnet.h
USB VIDEO CLASS
-P: Laurent Pinchart
-M: laurent.pinchart@skynet.be
+M: Laurent Pinchart <laurent.pinchart@skynet.be>
L: linux-uvc-devel@lists.berlios.de (subscribers-only)
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
F: drivers/media/video/uvc/
USB W996[87]CF DRIVER
-P: Luca Risolia
-M: luca.risolia@studio.unibo.it
+M: Luca Risolia <luca.risolia@studio.unibo.it>
L: linux-usb@vger.kernel.org
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
F: drivers/media/video/w996*
USB WIRELESS RNDIS DRIVER (rndis_wlan)
-P: Jussi Kivilinna
-M: jussi.kivilinna@mbnet.fi
+M: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
L: linux-wireless@vger.kernel.org
S: Maintained
F: drivers/net/wireless/rndis_wlan.c
USB XHCI DRIVER
-P: Sarah Sharp
-M: sarah.a.sharp@intel.com
+M: Sarah Sharp <sarah.a.sharp@intel.com>
L: linux-usb@vger.kernel.org
S: Supported
USB ZC0301 DRIVER
-P: Luca Risolia
-M: luca.risolia@studio.unibo.it
+M: Luca Risolia <luca.risolia@studio.unibo.it>
L: linux-usb@vger.kernel.org
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
F: drivers/media/video/zc0301/
USB ZD1201 DRIVER
-P: Jeroen Vreeken
-M: pe1rxq@amsat.org
+M: Jeroen Vreeken <pe1rxq@amsat.org>
L: linux-usb@vger.kernel.org
W: http://linux-lc100020.sourceforge.net
S: Maintained
F: drivers/net/wireless/zd1201.*
USB ZR364XX DRIVER
-P: Antoine Jacquet
-M: royale@zerezo.com
+M: Antoine Jacquet <royale@zerezo.com>
L: linux-usb@vger.kernel.org
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
F: drivers/media/video/zr364xx.c
USER-MODE LINUX (UML)
-P: Jeff Dike
-M: jdike@addtoit.com
+M: Jeff Dike <jdike@addtoit.com>
L: user-mode-linux-devel@lists.sourceforge.net
L: user-mode-linux-user@lists.sourceforge.net
W: http://user-mode-linux.sourceforge.net
F: fs/hppfs/
USERSPACE I/O (UIO)
-P: Hans J. Koch
-M: hjk@linutronix.de
-P: Greg Kroah-Hartman
-M: gregkh@suse.de
+M: "Hans J. Koch" <hjk@linutronix.de>
+M: Greg Kroah-Hartman <gregkh@suse.de>
S: Maintained
F: Documentation/DocBook/uio-howto.tmpl
F: drivers/uio/
F: include/linux/uio*.h
UTIL-LINUX-NG PACKAGE
-P: Karel Zak
-M: kzak@redhat.com
+M: Karel Zak <kzak@redhat.com>
L: util-linux-ng@vger.kernel.org
W: http://kernel.org/~kzak/util-linux-ng/
T: git git://git.kernel.org/pub/scm/utils/util-linux-ng/util-linux-ng.git
S: Maintained
UVESAFB DRIVER
-P: Michal Januszewski
-M: spock@gentoo.org
+M: Michal Januszewski <spock@gentoo.org>
L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
W: http://dev.gentoo.org/~spock/projects/uvesafb/
S: Maintained
F: drivers/video/uvesafb.*
VFAT/FAT/MSDOS FILESYSTEM
-P: OGAWA Hirofumi
-M: hirofumi@mail.parknet.co.jp
+M: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
S: Maintained
F: Documentation/filesystems/vfat.txt
F: fs/fat/
VIA RHINE NETWORK DRIVER
-P: Roger Luethi
-M: rl@hellgate.ch
+M: Roger Luethi <rl@hellgate.ch>
S: Maintained
F: drivers/net/via-rhine.c
VIAPRO SMBUS DRIVER
-P: Jean Delvare
-M: khali@linux-fr.org
+M: Jean Delvare <khali@linux-fr.org>
L: linux-i2c@vger.kernel.org
S: Maintained
F: Documentation/i2c/busses/i2c-viapro
F: drivers/i2c/busses/i2c-viapro.c
VIA SD/MMC CARD CONTROLLER DRIVER
-P: Joseph Chan
-M: JosephChan@via.com.tw
-P: Harald Welte
-M: HaraldWelte@viatech.com
+M: Joseph Chan <JosephChan@via.com.tw>
+M: Harald Welte <HaraldWelte@viatech.com>
S: Maintained
F: drivers/mmc/host/via-sdmmc.c
VIA UNICHROME(PRO)/CHROME9 FRAMEBUFFER DRIVER
-P: Joseph Chan
-M: JosephChan@via.com.tw
-P: Scott Fang
-M: ScottFang@viatech.com.cn
+M: Joseph Chan <JosephChan@via.com.tw>
+M: Scott Fang <ScottFang@viatech.com.cn>
L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
S: Maintained
F: drivers/video/via/
VIA VELOCITY NETWORK DRIVER
-P: Francois Romieu
-M: romieu@fr.zoreil.com
+M: Francois Romieu <romieu@fr.zoreil.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/via-velocity.*
VLAN (802.1Q)
-P: Patrick McHardy
-M: kaber@trash.net
+M: Patrick McHardy <kaber@trash.net>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/macvlan.c
F: net/8021q/
VLYNQ BUS
-P: Florian Fainelli
-M: florian@openwrt.org
+M: Florian Fainelli <florian@openwrt.org>
L: openwrt-devel@lists.openwrt.org
S: Maintained
F: drivers/vlynq/vlynq.c
F: include/linux/vlynq.h
VOLTAGE AND CURRENT REGULATOR FRAMEWORK
-P: Liam Girdwood
-M: lrg@slimlogic.co.uk
-P: Mark Brown
-M: broonie@opensource.wolfsonmicro.com
+M: Liam Girdwood <lrg@slimlogic.co.uk>
+M: Mark Brown <broonie@opensource.wolfsonmicro.com>
W: http://opensource.wolfsonmicro.com/node/15
W: http://www.slimlogic.co.uk/?p=48
T: git git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6.git
F: include/linux/regulator/
VT1211 HARDWARE MONITOR DRIVER
-P: Juerg Haefliger
-M: juergh@gmail.com
+M: Juerg Haefliger <juergh@gmail.com>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/vt1211
F: drivers/hwmon/vt1211.c
VT8231 HARDWARE MONITOR DRIVER
-P: Roger Lucas
-M: vt8231@hiddenengine.co.uk
+M: Roger Lucas <vt8231@hiddenengine.co.uk>
L: lm-sensors@lm-sensors.org
S: Maintained
F: drivers/hwmon/vt8231.c
W1 DALLAS'S 1-WIRE BUS
-P: Evgeniy Polyakov
-M: johnpol@2ka.mipt.ru
+M: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
S: Maintained
F: Documentation/w1/
F: drivers/w1/
W83791D HARDWARE MONITORING DRIVER
-P: Marc Hulsman
-M: m.hulsman@tudelft.nl
+M: Marc Hulsman <m.hulsman@tudelft.nl>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/w83791d
F: drivers/hwmon/w83791d.c
W83793 HARDWARE MONITORING DRIVER
-P: Rudolf Marek
-M: r.marek@assembler.cz
+M: Rudolf Marek <r.marek@assembler.cz>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/w83793
F: drivers/hwmon/w83793.c
W83L51xD SD/MMC CARD INTERFACE DRIVER
-P: Pierre Ossman
-M: pierre@ossman.eu
+M: Pierre Ossman <pierre@ossman.eu>
S: Maintained
F: drivers/mmc/host/wbsd.*
WATCHDOG DEVICE DRIVERS
-P: Wim Van Sebroeck
-M: wim@iguana.be
+M: Wim Van Sebroeck <wim@iguana.be>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog.git
S: Maintained
F: Documentation/watchdog/
F: include/linux/watchdog.h
WAVELAN NETWORK DRIVER & WIRELESS EXTENSIONS
-P: Jean Tourrilhes
-M: jt@hpl.hp.com
+M: Jean Tourrilhes <jt@hpl.hp.com>
L: linux-wireless@vger.kernel.org
W: http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/
S: Maintained
F: drivers/net/wireless/wavelan*
WD7000 SCSI DRIVER
-P: Miroslav Zagorac
-M: zaga@fly.cc.fer.hr
+M: Miroslav Zagorac <zaga@fly.cc.fer.hr>
L: linux-scsi@vger.kernel.org
S: Maintained
F: drivers/scsi/wd7000.c
WIMAX STACK
-P: Inaky Perez-Gonzalez
-M: inaky.perez-gonzalez@intel.com
+M: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
M: linux-wimax@intel.com
L: wimax@linuxwimax.org
S: Supported
W: http://linuxwimax.org
WIMEDIA LLC PROTOCOL (WLP) SUBSYSTEM
-P: David Vrabel
-M: david.vrabel@csr.com
+M: David Vrabel <david.vrabel@csr.com>
S: Maintained
F: include/linux/wlp.h
F: drivers/uwb/wlp/
WISTRON LAPTOP BUTTON DRIVER
-P: Miloslav Trmac
-M: mitr@volny.cz
+M: Miloslav Trmac <mitr@volny.cz>
S: Maintained
F: drivers/input/misc/wistron_btns.c
WL3501 WIRELESS PCMCIA CARD DRIVER
-P: Arnaldo Carvalho de Melo
-M: acme@ghostprotocols.net
+M: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
L: linux-wireless@vger.kernel.org
W: http://oops.ghostprotocols.net:81/blog
S: Maintained
F: drivers/net/wireless/wl3501*
WM97XX TOUCHSCREEN DRIVERS
-P: Mark Brown
-M: broonie@opensource.wolfsonmicro.com
-P: Liam Girdwood
-M: lrg@slimlogic.co.uk
+M: Mark Brown <broonie@opensource.wolfsonmicro.com>
+M: Liam Girdwood <lrg@slimlogic.co.uk>
L: linux-input@vger.kernel.org
T: git git://opensource.wolfsonmicro.com/linux-2.6-touch
W: http://opensource.wolfsonmicro.com/node/7
F: include/linux/wm97xx.h
X.25 NETWORK LAYER
-P: Henner Eisen
-M: eis@baty.hanse.de
+M: Henner Eisen <eis@baty.hanse.de>
L: linux-x25@vger.kernel.org
S: Maintained
F: Documentation/networking/x25*
F: net/x25/
X86 ARCHITECTURE (32-BIT AND 64-BIT)
-P: Thomas Gleixner
-M: tglx@linutronix.de
-P: Ingo Molnar
-M: mingo@redhat.com
-P: H. Peter Anvin
-M: hpa@zytor.com
+M: Thomas Gleixner <tglx@linutronix.de>
+M: Ingo Molnar <mingo@redhat.com>
+M: "H. Peter Anvin" <hpa@zytor.com>
M: x86@kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
S: Maintained
F: arch/x86/
XEN HYPERVISOR INTERFACE
-P: Jeremy Fitzhardinge
-M: jeremy@xensource.com
-P: Chris Wright
-M: chrisw@sous-sol.org
+M: Jeremy Fitzhardinge <jeremy@xensource.com>
+M: Chris Wright <chrisw@sous-sol.org>
L: virtualization@lists.osdl.org
L: xen-devel@lists.xensource.com
S: Supported
XFS FILESYSTEM
P: Silicon Graphics Inc
-P: Felix Blyakher
-M: felixb@sgi.com
+M: Felix Blyakher <felixb@sgi.com>
M: xfs-masters@oss.sgi.com
L: xfs@oss.sgi.com
W: http://oss.sgi.com/projects/xfs
F: fs/xfs/
XILINX SYSTEMACE DRIVER
-P: Grant Likely
-M: grant.likely@secretlab.ca
+M: Grant Likely <grant.likely@secretlab.ca>
W: http://www.secretlab.ca/
S: Maintained
F: drivers/block/xsysace.c
XILINX UARTLITE SERIAL DRIVER
-P: Peter Korsgaard
-M: jacmet@sunsite.dk
+M: Peter Korsgaard <jacmet@sunsite.dk>
L: linux-serial@vger.kernel.org
S: Maintained
F: drivers/serial/uartlite.c
YAM DRIVER FOR AX.25
-P: Jean-Paul Roubelat
-M: jpr@f6fbb.org
+M: Jean-Paul Roubelat <jpr@f6fbb.org>
L: linux-hams@vger.kernel.org
S: Maintained
F: drivers/net/hamradio/yam*
F: include/linux/yam.h
YEALINK PHONE DRIVER
-P: Henk Vergonet
-M: Henk.Vergonet@gmail.com
+M: Henk Vergonet <Henk.Vergonet@gmail.com>
L: usbb2k-api-dev@nongnu.org
S: Maintained
F: Documentation/input/yealink.txt
F: drivers/input/misc/yealink.*
Z8530 DRIVER FOR AX.25
-P: Joerg Reuter
-M: jreuter@yaina.de
+M: Joerg Reuter <jreuter@yaina.de>
W: http://yaina.de/jreuter/
W: http://www.qsl.net/dl1bke/
L: linux-hams@vger.kernel.org
F: drivers/net/hamradio/z8530.h
ZD1211RW WIRELESS DRIVER
-P: Daniel Drake
-M: dsd@gentoo.org
-P: Ulrich Kunitz
-M: kune@deine-taler.de
+M: Daniel Drake <dsd@gentoo.org>
+M: Ulrich Kunitz <kune@deine-taler.de>
W: http://zd1211.ath.cx/wiki/DriverRewrite
L: linux-wireless@vger.kernel.org
L: zd1211-devs@lists.sourceforge.net (subscribers-only)
F: drivers/media/video/zoran/
ZS DECSTATION Z85C30 SERIAL DRIVER
-P: Maciej W. Rozycki
-M: macro@linux-mips.org
+M: "Maciej W. Rozycki" <macro@linux-mips.org>
S: Maintained
F: drivers/serial/zs.*
THE REST
-P: Linus Torvalds
-M: torvalds@linux-foundation.org
+M: Linus Torvalds <torvalds@linux-foundation.org>
L: linux-kernel@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
S: Buried alive in reporters
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 31
-EXTRAVERSION = -rc3
+EXTRAVERSION =
NAME = Man-Eating Seals of Antiquity
# *DOCUMENTATION*
KBUILD_CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
-fno-strict-aliasing -fno-common \
-Werror-implicit-function-declaration \
- -Wno-format-security
+ -Wno-format-security \
+ -fno-delete-null-pointer-checks
KBUILD_AFLAGS := -D__ASSEMBLY__
# Read KERNELRELEASE from include/config/kernel.release (if it exists)
to the person responsible for the code relevant to what you were doing.
If it occurs repeatably try and describe how to recreate it. That is
worth even more than the oops itself. The list of maintainers and
-mailing lists is in the MAINTAINERS file in this directory.
+mailing lists is in the MAINTAINERS file in this directory. If you
+know the file name that causes the problem you can use the following
+command in this directory to find some of the maintainers of that file:
+ perl scripts/get_maintainer.pl -f <filename>
If it is a security bug, please copy the Security Contact listed
in the MAINTAINERS file. They can help coordinate bugfix and disclosure.
#define TIF_UAC_SIGBUS 7
#define TIF_MEMDIE 8
#define TIF_RESTORE_SIGMASK 9 /* restore signal mask in do_signal */
+#define TIF_NOTIFY_RESUME 10 /* callback before returning to user */
#define TIF_FREEZE 16 /* is freezing for suspend */
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
+#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME)
#define _TIF_FREEZE (1<<TIF_FREEZE)
/* Work to do on interrupt/exception return. */
-#define _TIF_WORK_MASK (_TIF_SIGPENDING | _TIF_NEED_RESCHED)
+#define _TIF_WORK_MASK (_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
+ _TIF_NOTIFY_RESUME)
/* Work to do on any return to userspace. */
#define _TIF_ALLWORK_MASK (_TIF_WORK_MASK \
#include <asm-generic/tlb.h>
-#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, pte)
-#define __pmd_free_tlb(tlb, pmd) pmd_free((tlb)->mm, pmd)
+#define __pte_free_tlb(tlb, pte, address) pte_free((tlb)->mm, pte)
+#define __pmd_free_tlb(tlb, pmd, address) pmd_free((tlb)->mm, pmd)
#endif
#include <linux/binfmts.h>
#include <linux/bitops.h>
#include <linux/syscalls.h>
+#include <linux/tracehook.h>
#include <asm/uaccess.h>
#include <asm/sigcontext.h>
{
if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
do_signal(regs, sw, r0, r19);
+
+ if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+ clear_thread_flag(TIF_NOTIFY_RESUME);
+ tracehook_notify_resume(regs);
+ if (current->replacement_session_keyring)
+ key_replace_session_keyring();
+ }
}
static void putstr(const char *ptr);
-#include <linux/compiler.h>
#include <mach/uncompress.h>
#ifdef CONFIG_DEBUG_ICEDCC
#include <linux/err.h>
#include <linux/string.h>
#include <linux/mutex.h>
+#include <linux/clk.h>
#include <asm/clkdev.h>
#include <mach/clkdev.h>
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
+CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc1
-# Wed Apr 8 10:18:06 2009
+# Linux kernel version: 2.6.31-rc4
+# Fri Jul 24 16:08:06 2009
#
CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+
+#
+# Performance Counters
+#
CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
-CONFIG_ARCH_MXC=y
# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
#
# Freescale MXC Implementations
CONFIG_MACH_MX27ADS=y
CONFIG_MACH_PCM038=y
CONFIG_MACH_PCM970_BASEBOARD=y
+CONFIG_MACH_MX27_3DS=y
+CONFIG_MACH_MX27LITE=y
CONFIG_MXC_IRQ_PRIOR=y
CONFIG_MXC_PWM=y
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
CONFIG_COMMON_CLKDEV=y
#
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_HIGHMEM is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
#
# Boot options
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_MXC=y
# CONFIG_MTD_ONENAND is not set
#
#
# UBI - Unsorted block images
#
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MISC_DEVICES is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
CONFIG_FEC=y
# CONFIG_FEC2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
# CONFIG_INPUT_MISC is not set
#
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_IMX=y
# CONFIG_I2C_OCORES is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# CONFIG_W1_MASTER_DS2482 is not set
CONFIG_W1_MASTER_MXC=y
+# CONFIG_W1_MASTER_DS1WM is not set
# CONFIG_W1_MASTER_GPIO is not set
#
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=y
-CONFIG_MEDIA_TUNER_TDA8290=y
-CONFIG_MEDIA_TUNER_TDA9887=y
-CONFIG_MEDIA_TUNER_TEA5761=y
-CONFIG_MEDIA_TUNER_TEA5767=y
-CONFIG_MEDIA_TUNER_MT20XX=y
-CONFIG_MEDIA_TUNER_XC2028=y
-CONFIG_MEDIA_TUNER_XC5000=y
-CONFIG_MEDIA_TUNER_MC44S803=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DAB is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FTRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_RATIONAL=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc1
-# Wed Apr 8 11:06:37 2009
+# Linux kernel version: 2.6.31-rc4
+# Tue Jul 28 14:11:34 2009
#
CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+
+#
+# Performance Counters
+#
CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
-CONFIG_ARCH_MXC=y
# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
#
# Freescale MXC Implementations
# CONFIG_ARCH_MX2 is not set
CONFIG_ARCH_MX3=y
CONFIG_ARCH_MX31=y
+CONFIG_ARCH_MX35=y
#
# MX3 platforms:
CONFIG_MACH_MX31ADS=y
CONFIG_MACH_MX31ADS_WM1133_EV1=y
CONFIG_MACH_PCM037=y
+CONFIG_MACH_PCM037_EET=y
CONFIG_MACH_MX31LITE=y
CONFIG_MACH_MX31_3DS=y
CONFIG_MACH_MX31MOBOARD=y
+CONFIG_MACH_MX31LILLY=y
CONFIG_MACH_QONG=y
+CONFIG_MACH_PCM043=y
+CONFIG_MACH_ARMADILLO5X0=y
+CONFIG_MACH_MX35_3DS=y
CONFIG_MXC_IRQ_PRIOR=y
CONFIG_MXC_PWM=y
+CONFIG_ARCH_HAS_RNGA=y
+CONFIG_ARCH_MXC_IOMUX_V3=y
#
# Processor Type
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_OUTER_CACHE=y
CONFIG_CACHE_L2X0=y
+# CONFIG_ARM_ERRATA_411920 is not set
CONFIG_COMMON_CLKDEV=y
#
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_HIGHMEM is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
#
# Boot options
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_MXC=y
# CONFIG_MTD_ONENAND is not set
#
#
# UBI - Unsorted block images
#
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_ETHOC is not set
# CONFIG_SMC911X is not set
CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
+CONFIG_DNET=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
-CONFIG_CS89x0=y
-CONFIG_CS89x0_NONISA_IRQ=y
+# CONFIG_CS89x0 is not set
+# CONFIG_KS8842 is not set
+CONFIG_FEC=y
+# CONFIG_FEC2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_IMX=y
# CONFIG_I2C_OCORES is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# CONFIG_W1_MASTER_DS2482 is not set
CONFIG_W1_MASTER_MXC=y
+# CONFIG_W1_MASTER_DS1WM is not set
# CONFIG_W1_MASTER_GPIO is not set
#
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
CONFIG_MFD_WM8352_CONFIG_MODE_0=y
CONFIG_MFD_WM8350_I2C=y
# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
+# CONFIG_AB3100_CORE is not set
+CONFIG_MEDIA_SUPPORT=y
#
# Multimedia core support
CONFIG_SOC_CAMERA_MT9V022=y
CONFIG_SOC_CAMERA_TW9910=y
# CONFIG_SOC_CAMERA_PLATFORM is not set
-# CONFIG_SOC_CAMERA_OV772X is not set
+CONFIG_SOC_CAMERA_OV772X=y
+CONFIG_MX3_VIDEO=y
CONFIG_VIDEO_MX3=y
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DAB is not set
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
CONFIG_REGULATOR_WM8350=y
+# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_ARM_UNWIND=y
#
# Compression
#
-# CONFIG_CRYPTO_DEFLATE is not set
+CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_LZO=y
#
# Random Number Generation
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_RATIONAL=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_USB_OTG_UTILS=y
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_ISP1301_OMAP is not set
-CONFIG_TWL4030_USB=y
+# CONFIG_TWL4030_USB is not set
# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0"
+CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0 console=ttyS2,115200n8"
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_ISP1301_OMAP is not set
CONFIG_TWL4030_USB=y
-CONFIG_MMC=m
+CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TWL4030=y
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc1
-# Thu Jul 2 00:16:59 2009
+# Linux kernel version: 2.6.31-rc3
+# Thu Jul 16 23:36:10 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
-CONFIG_HAVE_TCM=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-CONFIG_LBDAF=y
+# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_FILE_LOCKING=y
# CONFIG_CRC32 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_ALLOCATOR=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
#else /* ARM_ARCH_6 */
-#include <asm/system.h>
-
#ifdef CONFIG_SMP
#error SMP not supported on pre-ARMv6 CPUs
#endif
struct membank {
unsigned long start;
unsigned long size;
- int node;
+ unsigned short node;
+ unsigned short highmem;
};
struct meminfo {
* TIF_SYSCALL_TRACE - syscall trace active
* TIF_SIGPENDING - signal pending
* TIF_NEED_RESCHED - rescheduling necessary
+ * TIF_NOTIFY_RESUME - callback before returning to user
* TIF_USEDFPU - FPU was used by this task this quantum (SMP)
* TIF_POLLING_NRFLAG - true if poll_idle() is polling TIF_NEED_RESCHED
*/
#define TIF_SIGPENDING 0
#define TIF_NEED_RESCHED 1
+#define TIF_NOTIFY_RESUME 2 /* callback before returning to user */
#define TIF_SYSCALL_TRACE 8
#define TIF_POLLING_NRFLAG 16
#define TIF_USING_IWMMXT 17
#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
+#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG)
#define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT)
}
#define tlb_remove_page(tlb,page) free_page_and_swap_cache(page)
-#define pte_free_tlb(tlb, ptep) pte_free((tlb)->mm, ptep)
-#define pmd_free_tlb(tlb, pmdp) pmd_free((tlb)->mm, pmdp)
+#define pte_free_tlb(tlb, ptep, addr) pte_free((tlb)->mm, ptep)
+#define pmd_free_tlb(tlb, pmdp, addr) pmd_free((tlb)->mm, pmdp)
#define tlb_migrate_finish(mm) do { } while (0)
work_pending:
tst r1, #_TIF_NEED_RESCHED
bne work_resched
- tst r1, #_TIF_SIGPENDING
+ tst r1, #_TIF_SIGPENDING|_TIF_NOTIFY_RESUME
beq no_work_pending
mov r0, sp @ 'regs'
mov r2, why @ 'syscall'
sub r0, r0, #MCOUNT_INSN_SIZE
mov lr, pc
mov pc, r2
- mov lr, r1 @ restore lr
+ ldr lr, [fp, #-4] @ restore lr
ldmia sp!, {r0-r3, pc}
#endif /* CONFIG_DYNAMIC_FTRACE */
#include <linux/personality.h>
#include <linux/freezer.h>
#include <linux/uaccess.h>
+#include <linux/tracehook.h>
#include <asm/elf.h>
#include <asm/cacheflush.h>
}
#ifdef CONFIG_CRUNCH
-static int preserve_crunch_context(struct crunch_sigframe *frame)
+static int preserve_crunch_context(struct crunch_sigframe __user *frame)
{
char kbuf[sizeof(*frame) + 8];
struct crunch_sigframe *kframe;
return __copy_to_user(frame, kframe, sizeof(*frame));
}
-static int restore_crunch_context(struct crunch_sigframe *frame)
+static int restore_crunch_context(struct crunch_sigframe __user *frame)
{
char kbuf[sizeof(*frame) + 8];
struct crunch_sigframe *kframe;
{
if (thread_flags & _TIF_SIGPENDING)
do_signal(¤t->blocked, regs, syscall);
+
+ if (thread_flags & _TIF_NOTIFY_RESUME) {
+ clear_thread_flag(TIF_NOTIFY_RESUME);
+ tracehook_notify_resume(regs);
+ if (current->replacement_session_keyring)
+ key_replace_session_keyring();
+ }
}
--- /dev/null
+/*
+ * Header file for the Atmel AHB DMA Controller driver
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef AT_HDMAC_H
+#define AT_HDMAC_H
+
+#include <linux/dmaengine.h>
+
+/**
+ * struct at_dma_platform_data - Controller configuration parameters
+ * @nr_channels: Number of channels supported by hardware (max 8)
+ * @cap_mask: dma_capability flags supported by the platform
+ */
+struct at_dma_platform_data {
+ unsigned int nr_channels;
+ dma_cap_mask_t cap_mask;
+};
+
+/**
+ * enum at_dma_slave_width - DMA slave register access width.
+ * @AT_DMA_SLAVE_WIDTH_8BIT: Do 8-bit slave register accesses
+ * @AT_DMA_SLAVE_WIDTH_16BIT: Do 16-bit slave register accesses
+ * @AT_DMA_SLAVE_WIDTH_32BIT: Do 32-bit slave register accesses
+ */
+enum at_dma_slave_width {
+ AT_DMA_SLAVE_WIDTH_8BIT = 0,
+ AT_DMA_SLAVE_WIDTH_16BIT,
+ AT_DMA_SLAVE_WIDTH_32BIT,
+};
+
+/**
+ * struct at_dma_slave - Controller-specific information about a slave
+ * @dma_dev: required DMA master device
+ * @tx_reg: physical address of data register used for
+ * memory-to-peripheral transfers
+ * @rx_reg: physical address of data register used for
+ * peripheral-to-memory transfers
+ * @reg_width: peripheral register width
+ * @cfg: Platform-specific initializer for the CFG register
+ * @ctrla: Platform-specific initializer for the CTRLA register
+ */
+struct at_dma_slave {
+ struct device *dma_dev;
+ dma_addr_t tx_reg;
+ dma_addr_t rx_reg;
+ enum at_dma_slave_width reg_width;
+ u32 cfg;
+ u32 ctrla;
+};
+
+
+/* Platform-configurable bits in CFG */
+#define ATC_SRC_PER(h) (0xFU & (h)) /* Channel src rq associated with periph handshaking ifc h */
+#define ATC_DST_PER(h) ((0xFU & (h)) << 4) /* Channel dst rq associated with periph handshaking ifc h */
+#define ATC_SRC_REP (0x1 << 8) /* Source Replay Mod */
+#define ATC_SRC_H2SEL (0x1 << 9) /* Source Handshaking Mod */
+#define ATC_SRC_H2SEL_SW (0x0 << 9)
+#define ATC_SRC_H2SEL_HW (0x1 << 9)
+#define ATC_DST_REP (0x1 << 12) /* Destination Replay Mod */
+#define ATC_DST_H2SEL (0x1 << 13) /* Destination Handshaking Mod */
+#define ATC_DST_H2SEL_SW (0x0 << 13)
+#define ATC_DST_H2SEL_HW (0x1 << 13)
+#define ATC_SOD (0x1 << 16) /* Stop On Done */
+#define ATC_LOCK_IF (0x1 << 20) /* Interface Lock */
+#define ATC_LOCK_B (0x1 << 21) /* AHB Bus Lock */
+#define ATC_LOCK_IF_L (0x1 << 22) /* Master Interface Arbiter Lock */
+#define ATC_LOCK_IF_L_CHUNK (0x0 << 22)
+#define ATC_LOCK_IF_L_BUFFER (0x1 << 22)
+#define ATC_AHB_PROT_MASK (0x7 << 24) /* AHB Protection */
+#define ATC_FIFOCFG_MASK (0x3 << 28) /* FIFO Request Configuration */
+#define ATC_FIFOCFG_LARGESTBURST (0x0 << 28)
+#define ATC_FIFOCFG_HALFFIFO (0x1 << 28)
+#define ATC_FIFOCFG_ENOUGHSPACE (0x2 << 28)
+
+/* Platform-configurable bits in CTRLA */
+#define ATC_SCSIZE_MASK (0x7 << 16) /* Source Chunk Transfer Size */
+#define ATC_SCSIZE_1 (0x0 << 16)
+#define ATC_SCSIZE_4 (0x1 << 16)
+#define ATC_SCSIZE_8 (0x2 << 16)
+#define ATC_SCSIZE_16 (0x3 << 16)
+#define ATC_SCSIZE_32 (0x4 << 16)
+#define ATC_SCSIZE_64 (0x5 << 16)
+#define ATC_SCSIZE_128 (0x6 << 16)
+#define ATC_SCSIZE_256 (0x7 << 16)
+#define ATC_DCSIZE_MASK (0x7 << 20) /* Destination Chunk Transfer Size */
+#define ATC_DCSIZE_1 (0x0 << 20)
+#define ATC_DCSIZE_4 (0x1 << 20)
+#define ATC_DCSIZE_8 (0x2 << 20)
+#define ATC_DCSIZE_16 (0x3 << 20)
+#define ATC_DCSIZE_32 (0x4 << 20)
+#define ATC_DCSIZE_64 (0x5 << 20)
+#define ATC_DCSIZE_128 (0x6 << 20)
+#define ATC_DCSIZE_256 (0x7 << 20)
+
+#endif /* AT_HDMAC_H */
#include <mach/serial.h>
#include <mach/nand.h>
#include <mach/mmc.h>
-#include <mach/common.h>
#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000
#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
#include <mach/serial.h>
#include <mach/nand.h>
#include <mach/mmc.h>
-#include <mach/common.h>
#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000
#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
#include <mach/nand.h>
#include <mach/mmc.h>
#include <mach/emac.h>
-#include <mach/common.h>
#define DM644X_EVM_PHY_MASK (0x2)
#define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
#include <mach/i2c.h>
#include <mach/mmc.h>
#include <mach/emac.h>
-#include <mach/common.h>
#define DM646X_EVM_PHY_MASK (0x2)
#define DM646X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
#include <mach/serial.h>
#include <mach/psc.h>
#include <mach/mux.h>
-#include <mach/common.h>
#define SFFSDR_PHY_MASK (0x2)
#define SFFSDR_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/module.h>
+#include <linux/io.h>
#include <mach/dma.h>
#include <mach/hardware.h>
#define TS72XX_OPTIONS2_TS9420_BOOT 0x02
-#define TS72XX_NOR_PHYS_BASE 0x60000000
-#define TS72XX_NOR2_PHYS_BASE 0x62000000
-
#define TS72XX_NAND1_DATA_PHYS_BASE 0x60000000
#define TS72XX_NAND2_DATA_PHYS_BASE 0x70000000
#define TS72XX_NAND_DATA_VIRT_BASE 0xfebfc000
}
}
+/*************************************************************************
+ * NOR flash (TS-7200 only)
+ *************************************************************************/
static struct physmap_flash_data ts72xx_flash_data = {
- .width = 1,
+ .width = 2,
};
static struct resource ts72xx_flash_resource = {
- .start = TS72XX_NOR_PHYS_BASE,
- .end = TS72XX_NOR_PHYS_BASE + SZ_16M - 1,
+ .start = EP93XX_CS6_PHYS_BASE,
+ .end = EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
.flags = IORESOURCE_MEM,
};
.resource = &ts72xx_flash_resource,
};
+static void __init ts72xx_register_flash(void)
+{
+ if (board_is_ts7200())
+ platform_device_register(&ts72xx_flash);
+}
+
static unsigned char ts72xx_rtc_readbyte(unsigned long addr)
{
__raw_writeb(addr, TS72XX_RTC_INDEX_VIRT_BASE);
static void __init ts72xx_init_machine(void)
{
ep93xx_init_devices();
- if (board_is_ts7200())
- platform_device_register(&ts72xx_flash);
+ ts72xx_register_flash();
platform_device_register(&ts72xx_rtc_device);
ep93xx_register_eth(&ts72xx_eth_data, 1);
#include <mach/hardware.h>
-#define IO_SPACE_LIMIT 0xffff0000
+#define IO_SPACE_LIMIT 0x0000ffff
extern int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data);
extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data);
#define MPP48_GPIO MPP( 48, 0x0, 1, 1, 0, 0, 0, 1 )
#define MPP48_TSMP12 MPP( 48, 0x1, 1, 1, 0, 0, 0, 1 )
-#define MPP48_TDM_DTX MPP( 48. 0x2, 0, 1, 0, 0, 0, 1 )
+#define MPP48_TDM_DTX MPP( 48, 0x2, 0, 1, 0, 0, 0, 1 )
#define MPP49_GPIO MPP( 49, 0x0, 1, 1, 0, 0, 0, 1 )
#define MPP49_TSMP9 MPP( 49, 0x1, 1, 1, 0, 0, 0, 1 )
}
+static int __init ts219_pci_init(void)
+{
+ if (machine_is_ts219())
+ kirkwood_pcie_init();
+
+ return 0;
+}
+subsys_initcall(ts219_pci_init);
+
MACHINE_START(TS219, "QNAP TS-119/TS-219")
/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
.phys_io = KIRKWOOD_REGS_PHYS_BASE,
#include <asm/sizes.h>
+/*
+ * Clocks are derived from MCLK, which is 25Mhz
+ */
+#define KS8695_CLOCK_RATE 25000000
+
/*
* Physical RAM address.
*/
#ifndef __ASM_ARCH_TIMEX_H
#define __ASM_ARCH_TIMEX_H
-/* timers are derived from MCLK, which is 25MHz */
-#define CLOCK_TICK_RATE 25000000
+#include <mach/hardware.h>
+
+#define CLOCK_TICK_RATE KS8695_CLOCK_RATE
#endif
static void __init ks8695_pci_preinit(void)
{
+ /* make software reset to avoid freeze if PCI bus was messed up */
+ __raw_writel(0x80000000, KS8695_PCI_VA + KS8695_PBCS);
+
/* stage 1 initialization, subid, subdevice = 0x0001 */
__raw_writel(0x00010001, KS8695_PCI_VA + KS8695_CRCSID);
Include support for Phytec pcm037 platform. This includes
specific configurations for the board and its peripherals.
+config MACH_PCM037_EET
+ bool "Support pcm037 EET board extensions"
+ depends on MACH_PCM037
+ help
+ Add support for PCM037 EET baseboard extensions. If you are using the
+ OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
+ command-line parameter.
+
config MACH_MX31LITE
bool "Support MX31 LITEKIT (LogicPD)"
select ARCH_MX31
obj-$(CONFIG_MACH_MX31LILLY) += mx31lilly.o mx31lilly-db.o
obj-$(CONFIG_MACH_MX31LITE) += mx31lite.o
obj-$(CONFIG_MACH_PCM037) += pcm037.o
+obj-$(CONFIG_MACH_PCM037_EET) += pcm037_eet.o
obj-$(CONFIG_MACH_MX31_3DS) += mx31pdk.o
obj-$(CONFIG_MACH_MX31MOBOARD) += mx31moboard.o mx31moboard-devboard.o \
mx31moboard-marxbot.o
#include <linux/smsc911x.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <mach/mmc.h>
#include <mach/ipu.h>
#include <mach/mx3fb.h>
+#include <mach/mxc_nand.h>
#include "devices.h"
+#include "crm_regs.h"
static int armadillo5x0_pins[] = {
/* UART1 */
MX31_PIN_FPSHIFT__FPSHIFT,
MX31_PIN_DRDY0__DRDY0,
IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/
+};
+/*
+ * NAND Flash
+ */
+static struct mxc_nand_platform_data armadillo5x0_nand_flash_pdata = {
+ .width = 1,
+ .hw_ecc = 1,
+};
+
+/*
+ * MTD NOR Flash
+ */
+static struct mtd_partition armadillo5x0_nor_flash_partitions[] = {
+ {
+ .name = "nor.bootloader",
+ .offset = 0x00000000,
+ .size = 4*32*1024,
+ }, {
+ .name = "nor.kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 16*128*1024,
+ }, {
+ .name = "nor.userland",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 110*128*1024,
+ }, {
+ .name = "nor.config",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 1*128*1024,
+ },
+};
+
+static struct physmap_flash_data armadillo5x0_nor_flash_pdata = {
+ .width = 2,
+ .parts = armadillo5x0_nor_flash_partitions,
+ .nr_parts = ARRAY_SIZE(armadillo5x0_nor_flash_partitions),
+};
+
+static struct resource armadillo5x0_nor_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = CS0_BASE_ADDR,
+ .end = CS0_BASE_ADDR + SZ_64M - 1,
+};
+
+static struct platform_device armadillo5x0_nor_flash = {
+ .name = "physmap-flash",
+ .id = -1,
+ .num_resources = 1,
+ .resource = &armadillo5x0_nor_flash_resource,
};
/*
/* Register FB */
mxc_register_device(&mx3_ipu, &mx3_ipu_data);
mxc_register_device(&mx3_fb, &mx3fb_pdata);
+
+ /* Register NOR Flash */
+ mxc_register_device(&armadillo5x0_nor_flash,
+ &armadillo5x0_nor_flash_pdata);
+
+ /* Register NAND Flash */
+ mxc_register_device(&mxc_nand_device, &armadillo5x0_nand_flash_pdata);
+
+ /* set NAND page size to 2k if not configured via boot mode pins */
+ __raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR);
}
static void __init armadillo5x0_timer_init(void)
#include <linux/platform_device.h>
#include <linux/serial.h>
#include <linux/gpio.h>
-#include <linux/dma-mapping.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/common.h>
static int devboard_sdhc2_get_ro(struct device *dev)
{
- return gpio_get_value(SDHC2_WP);
+ return !gpio_get_value(SDHC2_WP);
}
static int devboard_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
static int marxbot_sdhc2_get_ro(struct device *dev)
{
- return gpio_get_value(SDHC2_WP);
+ return !gpio_get_value(SDHC2_WP);
}
static int marxbot_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
static int moboard_sdhc1_get_ro(struct device *dev)
{
- return gpio_get_value(SDHC1_WP);
+ return !gpio_get_value(SDHC1_WP);
}
static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
#include <linux/types.h>
#include <linux/init.h>
-
+#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/plat-ram.h>
#include <linux/irq.h>
#include <linux/fsl_devices.h>
-#include <mach/hardware.h>
+#include <media/soc_camera.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
+#include <mach/board-pcm037.h>
#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/i2c.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
#include <mach/ipu.h>
-#include <mach/board-pcm037.h>
+#include <mach/mmc.h>
+#include <mach/mx3_camera.h>
#include <mach/mx3fb.h>
#include <mach/mxc_nand.h>
-#include <mach/mmc.h>
-#ifdef CONFIG_I2C_IMX
-#include <mach/i2c.h>
-#endif
#include "devices.h"
+#include "pcm037.h"
+
+static enum pcm037_board_variant pcm037_instance = PCM037_PCM970;
+
+static int __init pcm037_variant_setup(char *str)
+{
+ if (!strcmp("eet", str))
+ pcm037_instance = PCM037_EET;
+ else if (strcmp("pcm970", str))
+ pr_warning("Unknown pcm037 baseboard variant %s\n", str);
+
+ return 1;
+}
+
+/* Supported values: "pcm970" (default) and "eet" */
+__setup("pcm037_variant=", pcm037_variant_setup);
+
+enum pcm037_board_variant pcm037_variant(void)
+{
+ return pcm037_instance;
+}
+
+/* UART1 with RTS/CTS handshake signals */
+static unsigned int pcm037_uart1_handshake_pins[] = {
+ MX31_PIN_CTS1__CTS1,
+ MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1,
+};
+
+/* UART1 without RTS/CTS handshake signals */
+static unsigned int pcm037_uart1_pins[] = {
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1,
+};
static unsigned int pcm037_pins[] = {
/* I2C */
MX31_PIN_CSPI2_MOSI__SCL,
MX31_PIN_CSPI2_MISO__SDA,
+ MX31_PIN_CSPI2_SS2__I2C3_SDA,
+ MX31_PIN_CSPI2_SCLK__I2C3_SCL,
/* SDHC1 */
MX31_PIN_SD1_DATA3__SD1_DATA3,
MX31_PIN_SD1_DATA2__SD1_DATA2,
MX31_PIN_CSPI1_SS0__SS0,
MX31_PIN_CSPI1_SS1__SS1,
MX31_PIN_CSPI1_SS2__SS2,
- /* UART1 */
- MX31_PIN_CTS1__CTS1,
- MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1,
/* UART2 */
MX31_PIN_TXD2__TXD2,
MX31_PIN_RXD2__RXD2,
MX31_PIN_D3_SPL__D3_SPL,
MX31_PIN_D3_CLS__D3_CLS,
MX31_PIN_LCS0__GPI03_23,
+ /* CSI */
+ IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO),
+ MX31_PIN_CSI_D6__CSI_D6,
+ MX31_PIN_CSI_D7__CSI_D7,
+ MX31_PIN_CSI_D8__CSI_D8,
+ MX31_PIN_CSI_D9__CSI_D9,
+ MX31_PIN_CSI_D10__CSI_D10,
+ MX31_PIN_CSI_D11__CSI_D11,
+ MX31_PIN_CSI_D12__CSI_D12,
+ MX31_PIN_CSI_D13__CSI_D13,
+ MX31_PIN_CSI_D14__CSI_D14,
+ MX31_PIN_CSI_D15__CSI_D15,
+ MX31_PIN_CSI_HSYNC__CSI_HSYNC,
+ MX31_PIN_CSI_MCLK__CSI_MCLK,
+ MX31_PIN_CSI_PIXCLK__CSI_PIXCLK,
+ MX31_PIN_CSI_VSYNC__CSI_VSYNC,
};
static struct physmap_flash_data pcm037_flash_data = {
.hw_ecc = 1,
};
-#ifdef CONFIG_I2C_IMX
static struct imxi2c_platform_data pcm037_i2c_1_data = {
.bitrate = 100000,
};
+static struct imxi2c_platform_data pcm037_i2c_2_data = {
+ .bitrate = 20000,
+};
+
static struct at24_platform_data board_eeprom = {
.byte_len = 4096,
.page_size = 32,
.flags = AT24_FLAG_ADDR16,
};
+static int pcm037_camera_power(struct device *dev, int on)
+{
+ /* disable or enable the camera in X7 or X8 PCM970 connector */
+ gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), !on);
+ return 0;
+}
+
+static struct i2c_board_info pcm037_i2c_2_devices[] = {
+ {
+ I2C_BOARD_INFO("mt9t031", 0x5d),
+ },
+};
+
+static struct soc_camera_link iclink = {
+ .bus_id = 0, /* Must match with the camera ID */
+ .power = pcm037_camera_power,
+ .board_info = &pcm037_i2c_2_devices[0],
+ .i2c_adapter_id = 2,
+ .module_name = "mt9t031",
+};
+
static struct i2c_board_info pcm037_i2c_devices[] = {
- {
+ {
I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
.platform_data = &board_eeprom,
}, {
.type = "pcf8563",
}
};
-#endif
+
+static struct platform_device pcm037_camera = {
+ .name = "soc-camera-pdrv",
+ .id = 0,
+ .dev = {
+ .platform_data = &iclink,
+ },
+};
/* Not connected by default */
#ifdef PCM970_SDHC_RW_SWITCH
.exit = pcm970_sdhc1_exit,
};
+struct mx3_camera_pdata camera_pdata = {
+ .dma_dev = &mx3_ipu.dev,
+ .flags = MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
+ .mclk_10khz = 2000,
+};
+
+static int __init pcm037_camera_alloc_dma(const size_t buf_size)
+{
+ dma_addr_t dma_handle;
+ void *buf;
+ int dma;
+
+ if (buf_size < 2 * 1024 * 1024)
+ return -EINVAL;
+
+ buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL);
+ if (!buf) {
+ pr_err("%s: cannot allocate camera buffer-memory\n", __func__);
+ return -ENOMEM;
+ }
+
+ memset(buf, 0, buf_size);
+
+ dma = dma_declare_coherent_memory(&mx3_camera.dev,
+ dma_handle, dma_handle, buf_size,
+ DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+
+ /* The way we call dma_declare_coherent_memory only a malloc can fail */
+ return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM;
+}
+
static struct platform_device *devices[] __initdata = {
&pcm037_flash,
&pcm037_sram_device,
+ &pcm037_camera,
};
static struct ipu_platform_data mx3_ipu_data = {
.sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
.vmode = FB_VMODE_NONINTERLACED,
.flag = 0,
+ }, {
+ /* 240x320 @ 60 Hz */
+ .name = "CMEL-OLED",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 185925,
+ .left_margin = 9,
+ .right_margin = 16,
+ .upper_margin = 7,
+ .lower_margin = 9,
+ .hsync_len = 1,
+ .vsync_len = 1,
+ .sync = FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
},
};
mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
"pcm037");
+ if (pcm037_variant() == PCM037_EET)
+ mxc_iomux_setup_multiple_pins(pcm037_uart1_pins,
+ ARRAY_SIZE(pcm037_uart1_pins), "pcm037_uart1");
+ else
+ mxc_iomux_setup_multiple_pins(pcm037_uart1_handshake_pins,
+ ARRAY_SIZE(pcm037_uart1_handshake_pins),
+ "pcm037_uart1");
+
platform_add_devices(devices, ARRAY_SIZE(devices));
mxc_register_device(&mxc_uart_device0, &uart_pdata);
}
-#ifdef CONFIG_I2C_IMX
+ /* I2C adapters and devices */
i2c_register_board_info(1, pcm037_i2c_devices,
ARRAY_SIZE(pcm037_i2c_devices));
mxc_register_device(&mxc_i2c_device1, &pcm037_i2c_1_data);
-#endif
+ mxc_register_device(&mxc_i2c_device2, &pcm037_i2c_2_data);
+
mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
mxc_register_device(&mx3_ipu, &mx3_ipu_data);
mxc_register_device(&mx3_fb, &mx3fb_pdata);
if (!gpio_usbotg_hs_activate())
mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+
+ /* CSI */
+ /* Camera power: default - off */
+ ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), "mt9t031-power");
+ if (!ret)
+ gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1);
+ else
+ iclink.power = NULL;
+
+ if (!pcm037_camera_alloc_dma(4 * 1024 * 1024))
+ mxc_register_device(&mx3_camera, &camera_pdata);
}
static void __init pcm037_timer_init(void)
.init_machine = mxc_board_init,
.timer = &pcm037_timer,
MACHINE_END
-
--- /dev/null
+#ifndef __PCM037_H__
+#define __PCM037_H__
+
+enum pcm037_board_variant {
+ PCM037_PCM970,
+ PCM037_EET,
+};
+
+extern enum pcm037_board_variant pcm037_variant(void);
+
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2009
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+
+#include <mach/common.h>
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+#include <mach/spi.h>
+#endif
+#include <mach/iomux-mx3.h>
+
+#include <asm/mach-types.h>
+
+#include "pcm037.h"
+#include "devices.h"
+
+static unsigned int pcm037_eet_pins[] = {
+ /* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */
+ IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_GPIO),
+ /* GPIO keys */
+ IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO), /* 0 */
+ IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO), /* 1 */
+ IOMUX_MODE(MX31_PIN_GPIO1_2, IOMUX_CONFIG_GPIO), /* 2 */
+ IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO), /* 3 */
+ IOMUX_MODE(MX31_PIN_SVEN0, IOMUX_CONFIG_GPIO), /* 32 */
+ IOMUX_MODE(MX31_PIN_STX0, IOMUX_CONFIG_GPIO), /* 33 */
+ IOMUX_MODE(MX31_PIN_SRX0, IOMUX_CONFIG_GPIO), /* 34 */
+ IOMUX_MODE(MX31_PIN_SIMPD0, IOMUX_CONFIG_GPIO), /* 35 */
+ IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_GPIO), /* 38 */
+ IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_GPIO), /* 39 */
+ IOMUX_MODE(MX31_PIN_KEY_ROW4, IOMUX_CONFIG_GPIO), /* 50 */
+ IOMUX_MODE(MX31_PIN_KEY_ROW5, IOMUX_CONFIG_GPIO), /* 51 */
+ IOMUX_MODE(MX31_PIN_KEY_ROW6, IOMUX_CONFIG_GPIO), /* 52 */
+ IOMUX_MODE(MX31_PIN_KEY_ROW7, IOMUX_CONFIG_GPIO), /* 53 */
+
+ /* LEDs */
+ IOMUX_MODE(MX31_PIN_DTR_DTE1, IOMUX_CONFIG_GPIO), /* 44 */
+ IOMUX_MODE(MX31_PIN_DSR_DTE1, IOMUX_CONFIG_GPIO), /* 45 */
+ IOMUX_MODE(MX31_PIN_KEY_COL5, IOMUX_CONFIG_GPIO), /* 55 */
+ IOMUX_MODE(MX31_PIN_KEY_COL6, IOMUX_CONFIG_GPIO), /* 56 */
+};
+
+/* SPI */
+static struct spi_board_info pcm037_spi_dev[] = {
+ {
+ .modalias = "dac124s085",
+ .max_speed_hz = 400000,
+ .bus_num = 0,
+ .chip_select = 0, /* Index in pcm037_spi1_cs[] */
+ .mode = SPI_CPHA,
+ },
+};
+
+/* Platform Data for MXC CSPI */
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)};
+
+struct spi_imx_master pcm037_spi1_master = {
+ .chipselect = pcm037_spi1_cs,
+ .num_chipselect = ARRAY_SIZE(pcm037_spi1_cs),
+};
+#endif
+
+/* GPIO-keys input device */
+static struct gpio_keys_button pcm037_gpio_keys[] = {
+ {
+ .type = EV_KEY,
+ .code = KEY_L,
+ .gpio = 0,
+ .desc = "Wheel Manual",
+ .wakeup = 0,
+ }, {
+ .type = EV_KEY,
+ .code = KEY_A,
+ .gpio = 1,
+ .desc = "Wheel AF",
+ .wakeup = 0,
+ }, {
+ .type = EV_KEY,
+ .code = KEY_V,
+ .gpio = 2,
+ .desc = "Wheel View",
+ .wakeup = 0,
+ }, {
+ .type = EV_KEY,
+ .code = KEY_M,
+ .gpio = 3,
+ .desc = "Wheel Menu",
+ .wakeup = 0,
+ }, {
+ .type = EV_KEY,
+ .code = KEY_UP,
+ .gpio = 32,
+ .desc = "Nav Pad Up",
+ .wakeup = 0,
+ }, {
+ .type = EV_KEY,
+ .code = KEY_RIGHT,
+ .gpio = 33,
+ .desc = "Nav Pad Right",
+ .wakeup = 0,
+ }, {
+ .type = EV_KEY,
+ .code = KEY_DOWN,
+ .gpio = 34,
+ .desc = "Nav Pad Down",
+ .wakeup = 0,
+ }, {
+ .type = EV_KEY,
+ .code = KEY_LEFT,
+ .gpio = 35,
+ .desc = "Nav Pad Left",
+ .wakeup = 0,
+ }, {
+ .type = EV_KEY,
+ .code = KEY_ENTER,
+ .gpio = 38,
+ .desc = "Nav Pad Ok",
+ .wakeup = 0,
+ }, {
+ .type = EV_KEY,
+ .code = KEY_O,
+ .gpio = 39,
+ .desc = "Wheel Off",
+ .wakeup = 0,
+ }, {
+ .type = EV_KEY,
+ .code = BTN_FORWARD,
+ .gpio = 50,
+ .desc = "Focus Forward",
+ .wakeup = 0,
+ }, {
+ .type = EV_KEY,
+ .code = BTN_BACK,
+ .gpio = 51,
+ .desc = "Focus Backward",
+ .wakeup = 0,
+ }, {
+ .type = EV_KEY,
+ .code = BTN_MIDDLE,
+ .gpio = 52,
+ .desc = "Release Half",
+ .wakeup = 0,
+ }, {
+ .type = EV_KEY,
+ .code = BTN_EXTRA,
+ .gpio = 53,
+ .desc = "Release Full",
+ .wakeup = 0,
+ },
+};
+
+static struct gpio_keys_platform_data pcm037_gpio_keys_platform_data = {
+ .buttons = pcm037_gpio_keys,
+ .nbuttons = ARRAY_SIZE(pcm037_gpio_keys),
+ .rep = 0, /* No auto-repeat */
+};
+
+static struct platform_device pcm037_gpio_keys_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &pcm037_gpio_keys_platform_data,
+ },
+};
+
+static int eet_init_devices(void)
+{
+ if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET)
+ return 0;
+
+ mxc_iomux_setup_multiple_pins(pcm037_eet_pins,
+ ARRAY_SIZE(pcm037_eet_pins), "pcm037_eet");
+
+ /* SPI */
+ spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev));
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+ mxc_register_device(&mxc_spi_device0, &pcm037_spi1_master);
+#endif
+
+ platform_device_register(&pcm037_gpio_keys_device);
+
+ return 0;
+}
+
+late_initcall(eet_init_devices);
#include <mach/irqs.h>
#include <mach/dma.h>
-#include <mach/irqs.h>
#include <mach/mux.h>
#include <mach/cpu.h>
#include <mach/mcbsp.h>
static void __init omap_2430sdp_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(NULL, NULL);
omap_init_irq();
omap_gpio_init();
}
static void __init omap_3430sdp_init_irq(void)
{
- omap2_init_common_hw(hyb18m512160af6_sdrc_params);
+ omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL);
omap_init_irq();
omap_gpio_init();
}
static void __init omap_4430sdp_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(NULL, NULL);
#ifdef CONFIG_OMAP_32K_TIMER
omap2_gp_clockevent_set_gptimer(1);
#endif
static void __init omap_apollon_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(NULL, NULL);
omap_init_irq();
omap_gpio_init();
apollon_init_smc91x();
static void __init omap_generic_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(NULL, NULL);
omap_init_irq();
}
static void __init omap_h4_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(NULL, NULL);
omap_init_irq();
omap_gpio_init();
h4_init_flash();
static void __init omap_ldp_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(NULL, NULL);
omap_init_irq();
omap_gpio_init();
ldp_init_smsc911x();
static void __init omap3_beagle_init_irq(void)
{
- omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
omap_init_irq();
#ifdef CONFIG_OMAP_32K_TIMER
omap2_gp_clockevent_set_gptimer(12);
usb_musb_init();
omap3beagle_flash_init();
+
+ /* Ensure SDRC pins are mux'd for self-refresh */
+ omap_cfg_reg(H16_34XX_SDRC_CKE0);
+ omap_cfg_reg(H17_34XX_SDRC_CKE1);
}
static void __init omap3_beagle_map_io(void)
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/i2c/twl4030.h>
+#include <linux/usb/otg.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
static void __init omap3_evm_init_irq(void)
{
- omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params, NULL);
omap_init_irq();
omap_gpio_init();
omap3evm_init_smc911x();
ARRAY_SIZE(omap3evm_spi_board_info));
omap_serial_init();
+#ifdef CONFIG_NOP_USB_XCEIV
+ /* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
+ usb_nop_xceiv_register();
+#endif
usb_musb_init();
ads7846_dev_init();
}
#include <mach/mcspi.h>
#include <mach/usb.h>
#include <mach/keypad.h>
+#include <mach/mux.h>
#include "sdram-micron-mt46h32m32lf-6.h"
#include "mmc-twl4030.h"
static void __init omap3pandora_init_irq(void)
{
- omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
omap_init_irq();
omap_gpio_init();
}
omap3pandora_ads7846_init();
pandora_keys_gpio_init();
usb_musb_init();
+
+ /* Ensure SDRC pins are mux'd for self-refresh */
+ omap_cfg_reg(H16_34XX_SDRC_CKE0);
+ omap_cfg_reg(H17_34XX_SDRC_CKE1);
}
static void __init omap3pandora_map_io(void)
#include <mach/gpmc.h>
#include <mach/hardware.h>
#include <mach/nand.h>
+#include <mach/mux.h>
#include <mach/usb.h>
#include "sdram-micron-mt46h32m32lf-6.h"
#define OVERO_GPIO_BT_XGATE 15
#define OVERO_GPIO_W2W_NRESET 16
+#define OVERO_GPIO_PENDOWN 114
#define OVERO_GPIO_BT_NRESET 164
#define OVERO_GPIO_USBH_CPEN 168
#define OVERO_GPIO_USBH_NRESET 183
.name = "smsc911x",
.id = -1,
.num_resources = ARRAY_SIZE(overo_smsc911x_resources),
- .resource = &overo_smsc911x_resources,
+ .resource = overo_smsc911x_resources,
.dev = {
.platform_data = &overo_smsc911x_config,
},
static void __init overo_init_irq(void)
{
- omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
omap_init_irq();
omap_gpio_init();
}
overo_ads7846_init();
overo_init_smsc911x();
+ /* Ensure SDRC pins are mux'd for self-refresh */
+ omap_cfg_reg(H16_34XX_SDRC_CKE0);
+ omap_cfg_reg(H17_34XX_SDRC_CKE1);
+
if ((gpio_request(OVERO_GPIO_W2W_NRESET,
"OVERO_GPIO_W2W_NRESET") == 0) &&
(gpio_direction_output(OVERO_GPIO_W2W_NRESET, 1) == 0)) {
.setup = rx51_twlgpio_setup,
};
+static struct twl4030_usb_data rx51_usb_data = {
+ .usb_mode = T2_USB_MODE_ULPI,
+};
+
static struct twl4030_platform_data rx51_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
.gpio = &rx51_gpio_data,
.keypad = &rx51_kp_data,
.madc = &rx51_madc_data,
+ .usb = &rx51_usb_data,
.vaux1 = &rx51_vaux1,
.vaux2 = &rx51_vaux2,
static void __init rx51_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(NULL, NULL);
omap_init_irq();
omap_gpio_init();
}
omap_serial_init();
usb_musb_init();
rx51_peripherals_init();
+
+ /* Ensure SDRC pins are mux'd for self-refresh */
+ omap_cfg_reg(H16_34XX_SDRC_CKE0);
+ omap_cfg_reg(H17_34XX_SDRC_CKE1);
}
static void __init rx51_map_io(void)
static void __init omap_zoom2_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(NULL, NULL);
omap_init_irq();
omap_gpio_init();
}
#include <mach/clock.h>
#include <mach/clockdomain.h>
#include <mach/cpu.h>
+#include <mach/prcm.h>
#include <asm/div64.h>
#include <mach/sdrc.h>
#include "cm-regbits-24xx.h"
#include "cm-regbits-34xx.h"
-#define MAX_CLOCK_ENABLE_WAIT 100000
-
/* DPLL rate rounding: minimum DPLL multiplier, divider values */
#define DPLL_MIN_MULTIPLIER 1
#define DPLL_MIN_DIVIDER 1
}
/**
- * omap2_wait_clock_ready - wait for clock to enable
- * @reg: physical address of clock IDLEST register
- * @mask: value to mask against to determine if the clock is active
- * @name: name of the clock (for printk)
+ * omap2_clk_dflt_find_companion - find companion clock to @clk
+ * @clk: struct clk * to find the companion clock of
+ * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
+ * @other_bit: u8 ** to return the companion clock bit shift in
+ *
+ * Note: We don't need special code here for INVERT_ENABLE for the
+ * time being since INVERT_ENABLE only applies to clocks enabled by
+ * CM_CLKEN_PLL
*
- * Returns 1 if the clock enabled in time, or 0 if it failed to enable
- * in roughly MAX_CLOCK_ENABLE_WAIT microseconds.
+ * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes it's
+ * just a matter of XORing the bits.
+ *
+ * Some clocks don't have companion clocks. For example, modules with
+ * only an interface clock (such as MAILBOXES) don't have a companion
+ * clock. Right now, this code relies on the hardware exporting a bit
+ * in the correct companion register that indicates that the
+ * nonexistent 'companion clock' is active. Future patches will
+ * associate this type of code with per-module data structures to
+ * avoid this issue, and remove the casts. No return value.
*/
-int omap2_wait_clock_ready(void __iomem *reg, u32 mask, const char *name)
+void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg,
+ u8 *other_bit)
{
- int i = 0;
- int ena = 0;
+ u32 r;
/*
- * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
- * 34xx reverses this, just to keep us on our toes
+ * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes
+ * it's just a matter of XORing the bits.
*/
- if (cpu_mask & (RATE_IN_242X | RATE_IN_243X))
- ena = mask;
- else if (cpu_mask & RATE_IN_343X)
- ena = 0;
-
- /* Wait for lock */
- while (((__raw_readl(reg) & mask) != ena) &&
- (i++ < MAX_CLOCK_ENABLE_WAIT)) {
- udelay(1);
- }
-
- if (i <= MAX_CLOCK_ENABLE_WAIT)
- pr_debug("Clock %s stable after %d loops\n", name, i);
- else
- printk(KERN_ERR "Clock %s didn't enable in %d tries\n",
- name, MAX_CLOCK_ENABLE_WAIT);
-
-
- return (i < MAX_CLOCK_ENABLE_WAIT) ? 1 : 0;
-};
+ r = ((__force u32)clk->enable_reg ^ (CM_FCLKEN ^ CM_ICLKEN));
+ *other_reg = (__force void __iomem *)r;
+ *other_bit = clk->enable_bit;
+}
-/*
- * Note: We don't need special code here for INVERT_ENABLE
- * for the time being since INVERT_ENABLE only applies to clocks enabled by
- * CM_CLKEN_PLL
+/**
+ * omap2_clk_dflt_find_idlest - find CM_IDLEST reg va, bit shift for @clk
+ * @clk: struct clk * to find IDLEST info for
+ * @idlest_reg: void __iomem ** to return the CM_IDLEST va in
+ * @idlest_bit: u8 ** to return the CM_IDLEST bit shift in
+ *
+ * Return the CM_IDLEST register address and bit shift corresponding
+ * to the module that "owns" this clock. This default code assumes
+ * that the CM_IDLEST bit shift is the CM_*CLKEN bit shift, and that
+ * the IDLEST register address ID corresponds to the CM_*CLKEN
+ * register address ID (e.g., that CM_FCLKEN2 corresponds to
+ * CM_IDLEST2). This is not true for all modules. No return value.
*/
-static void omap2_clk_wait_ready(struct clk *clk)
+void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg,
+ u8 *idlest_bit)
{
- void __iomem *reg, *other_reg, *st_reg;
- u32 bit;
+ u32 r;
- /*
- * REVISIT: This code is pretty ugly. It would be nice to generalize
- * it and pull it into struct clk itself somehow.
- */
- reg = clk->enable_reg;
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ *idlest_bit = clk->enable_bit;
+}
- /*
- * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes
- * it's just a matter of XORing the bits.
- */
- other_reg = (void __iomem *)((u32)reg ^ (CM_FCLKEN ^ CM_ICLKEN));
+/**
+ * omap2_module_wait_ready - wait for an OMAP module to leave IDLE
+ * @clk: struct clk * belonging to the module
+ *
+ * If the necessary clocks for the OMAP hardware IP block that
+ * corresponds to clock @clk are enabled, then wait for the module to
+ * indicate readiness (i.e., to leave IDLE). This code does not
+ * belong in the clock code and will be moved in the medium term to
+ * module-dependent code. No return value.
+ */
+static void omap2_module_wait_ready(struct clk *clk)
+{
+ void __iomem *companion_reg, *idlest_reg;
+ u8 other_bit, idlest_bit;
+
+ /* Not all modules have multiple clocks that their IDLEST depends on */
+ if (clk->ops->find_companion) {
+ clk->ops->find_companion(clk, &companion_reg, &other_bit);
+ if (!(__raw_readl(companion_reg) & (1 << other_bit)))
+ return;
+ }
- /* Check if both functional and interface clocks
- * are running. */
- bit = 1 << clk->enable_bit;
- if (!(__raw_readl(other_reg) & bit))
- return;
- st_reg = (void __iomem *)(((u32)other_reg & ~0xf0) | 0x20); /* CM_IDLEST* */
+ clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit);
- omap2_wait_clock_ready(st_reg, bit, clk->name);
+ omap2_cm_wait_idlest(idlest_reg, (1 << idlest_bit), clk->name);
}
-static int omap2_dflt_clk_enable(struct clk *clk)
+int omap2_dflt_clk_enable(struct clk *clk)
{
u32 v;
if (unlikely(clk->enable_reg == NULL)) {
- printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
+ pr_err("clock.c: Enable for %s without enable code\n",
clk->name);
return 0; /* REVISIT: -EINVAL */
}
__raw_writel(v, clk->enable_reg);
v = __raw_readl(clk->enable_reg); /* OCP barrier */
- return 0;
-}
+ if (clk->ops->find_idlest)
+ omap2_module_wait_ready(clk);
-static int omap2_dflt_clk_enable_wait(struct clk *clk)
-{
- int ret;
-
- if (!clk->enable_reg) {
- printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
- clk->name);
- return 0; /* REVISIT: -EINVAL */
- }
-
- ret = omap2_dflt_clk_enable(clk);
- if (ret == 0)
- omap2_clk_wait_ready(clk);
- return ret;
+ return 0;
}
-static void omap2_dflt_clk_disable(struct clk *clk)
+void omap2_dflt_clk_disable(struct clk *clk)
{
u32 v;
}
const struct clkops clkops_omap2_dflt_wait = {
- .enable = omap2_dflt_clk_enable_wait,
+ .enable = omap2_dflt_clk_enable,
.disable = omap2_dflt_clk_disable,
+ .find_companion = omap2_clk_dflt_find_companion,
+ .find_idlest = omap2_clk_dflt_find_idlest,
};
const struct clkops clkops_omap2_dflt = {
u32 omap2_get_dpll_rate(struct clk *clk);
int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name);
void omap2_clk_prepare_for_reboot(void);
+int omap2_dflt_clk_enable(struct clk *clk);
+void omap2_dflt_clk_disable(struct clk *clk);
+void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg,
+ u8 *other_bit);
+void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg,
+ u8 *idlest_bit);
extern const struct clkops clkops_omap2_dflt_wait;
extern const struct clkops clkops_omap2_dflt;
#include <mach/clock.h>
#include <mach/sram.h>
+#include <mach/prcm.h>
#include <asm/div64.h>
#include <asm/clkdev.h>
static const struct clkops clkops_oscck;
static const struct clkops clkops_fixed;
+static void omap2430_clk_i2chs_find_idlest(struct clk *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit);
+
+/* 2430 I2CHS has non-standard IDLEST register */
+static const struct clkops clkops_omap2430_i2chs_wait = {
+ .enable = omap2_dflt_clk_enable,
+ .disable = omap2_dflt_clk_disable,
+ .find_idlest = omap2430_clk_i2chs_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
#include "clock24xx.h"
struct omap_clk {
* Omap24xx specific clock functions
*-------------------------------------------------------------------------*/
+/**
+ * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ *
+ * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the
+ * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE. This custom function
+ * passes back the correct CM_IDLEST register address for I2CHS
+ * modules. No return value.
+ */
+static void omap2430_clk_i2chs_find_idlest(struct clk *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit)
+{
+ *idlest_reg = OMAP_CM_REGADDR(CORE_MOD, CM_IDLEST);
+ *idlest_bit = clk->enable_bit;
+}
+
+
/**
* omap2xxx_clk_get_core_rate - return the CORE_CLK rate
* @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck")
else if (clk == &apll54_ck)
cval = OMAP24XX_ST_54M_APLL;
- omap2_wait_clock_ready(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), cval,
- clk->name);
+ omap2_cm_wait_idlest(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), cval,
+ clk->name);
/*
* REVISIT: Should we return an error code if omap2_wait_clock_ready()
static struct clk i2chs2_fck = {
.name = "i2c_fck",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2430_i2chs_wait,
.id = 2,
.parent = &func_96m_ck,
.clkdm_name = "core_l4_clkdm",
static struct clk i2chs1_fck = {
.name = "i2c_fck",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2430_i2chs_wait,
.id = 1,
.parent = &func_96m_ck,
.clkdm_name = "core_l4_clkdm",
* OMAP3-specific clock framework functions
*
* Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2008 Nokia Corporation
+ * Copyright (C) 2007-2009 Nokia Corporation
*
* Written by Paul Walmsley
* Testing and integration fixes by Jouni Högander
static const struct clkops clkops_noncore_dpll_ops;
+static void omap3430es2_clk_ssi_find_idlest(struct clk *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit);
+static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit);
+static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit);
+
+static const struct clkops clkops_omap3430es2_ssi_wait = {
+ .enable = omap2_dflt_clk_enable,
+ .disable = omap2_dflt_clk_disable,
+ .find_idlest = omap3430es2_clk_ssi_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
+static const struct clkops clkops_omap3430es2_hsotgusb_wait = {
+ .enable = omap2_dflt_clk_enable,
+ .disable = omap2_dflt_clk_disable,
+ .find_idlest = omap3430es2_clk_hsotgusb_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
+static const struct clkops clkops_omap3430es2_dss_usbhost_wait = {
+ .enable = omap2_dflt_clk_enable,
+ .disable = omap2_dflt_clk_disable,
+ .find_idlest = omap3430es2_clk_dss_usbhost_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
#include "clock34xx.h"
struct omap_clk {
CLK(NULL, "fshostusb_fck", &fshostusb_fck, CK_3430ES1),
CLK(NULL, "core_12m_fck", &core_12m_fck, CK_343X),
CLK("omap_hdq.0", "fck", &hdq_fck, CK_343X),
- CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck, CK_343X),
- CLK(NULL, "ssi_sst_fck", &ssi_sst_fck, CK_343X),
+ CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es1, CK_3430ES1),
+ CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es2, CK_3430ES2),
+ CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es1, CK_3430ES1),
+ CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es2, CK_3430ES2),
CLK(NULL, "core_l3_ick", &core_l3_ick, CK_343X),
- CLK("musb_hdrc", "ick", &hsotgusb_ick, CK_343X),
+ CLK("musb_hdrc", "ick", &hsotgusb_ick_3430es1, CK_3430ES1),
+ CLK("musb_hdrc", "ick", &hsotgusb_ick_3430es2, CK_3430ES2),
CLK(NULL, "sdrc_ick", &sdrc_ick, CK_343X),
CLK(NULL, "gpmc_fck", &gpmc_fck, CK_343X),
CLK(NULL, "security_l3_ick", &security_l3_ick, CK_343X),
CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_343X),
CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_343X),
CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_343X),
- CLK(NULL, "ssi_ick", &ssi_ick, CK_343X),
+ CLK(NULL, "ssi_ick", &ssi_ick_3430es1, CK_3430ES1),
+ CLK(NULL, "ssi_ick", &ssi_ick_3430es2, CK_3430ES2),
CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_3430ES1),
CLK(NULL, "security_l4_ick2", &security_l4_ick2, CK_343X),
CLK(NULL, "aes1_ick", &aes1_ick, CK_343X),
CLK("omap_rng", "ick", &rng_ick, CK_343X),
CLK(NULL, "sha11_ick", &sha11_ick, CK_343X),
CLK(NULL, "des1_ick", &des1_ick, CK_343X),
- CLK("omapfb", "dss1_fck", &dss1_alwon_fck, CK_343X),
+ CLK("omapfb", "dss1_fck", &dss1_alwon_fck_3430es1, CK_3430ES1),
+ CLK("omapfb", "dss1_fck", &dss1_alwon_fck_3430es2, CK_3430ES2),
CLK("omapfb", "tv_fck", &dss_tv_fck, CK_343X),
CLK("omapfb", "video_fck", &dss_96m_fck, CK_343X),
CLK("omapfb", "dss2_fck", &dss2_alwon_fck, CK_343X),
- CLK("omapfb", "ick", &dss_ick, CK_343X),
+ CLK("omapfb", "ick", &dss_ick_3430es1, CK_3430ES1),
+ CLK("omapfb", "ick", &dss_ick_3430es2, CK_3430ES2),
CLK(NULL, "cam_mclk", &cam_mclk, CK_343X),
CLK(NULL, "cam_ick", &cam_ick, CK_343X),
CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_343X),
*/
#define SDRC_MPURATE_LOOPS 96
+/**
+ * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ *
+ * The OMAP3430ES2 SSI target CM_IDLEST bit is at a different shift
+ * from the CM_{I,F}CLKEN bit. Pass back the correct info via
+ * @idlest_reg and @idlest_bit. No return value.
+ */
+static void omap3430es2_clk_ssi_find_idlest(struct clk *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit)
+{
+ u32 r;
+
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ *idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT;
+}
+
+/**
+ * omap3430es2_clk_dss_usbhost_find_idlest - CM_IDLEST info for DSS, USBHOST
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ *
+ * Some OMAP modules on OMAP3 ES2+ chips have both initiator and
+ * target IDLEST bits. For our purposes, we are concerned with the
+ * target IDLEST bits, which exist at a different bit position than
+ * the *CLKEN bit position for these modules (DSS and USBHOST) (The
+ * default find_idlest code assumes that they are at the same
+ * position.) No return value.
+ */
+static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit)
+{
+ u32 r;
+
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ /* USBHOST_IDLE has same shift */
+ *idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT;
+}
+
+/**
+ * omap3430es2_clk_hsotgusb_find_idlest - return CM_IDLEST info for HSOTGUSB
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ *
+ * The OMAP3430ES2 HSOTGUSB target CM_IDLEST bit is at a different
+ * shift from the CM_{I,F}CLKEN bit. Pass back the correct info via
+ * @idlest_reg and @idlest_bit. No return value.
+ */
+static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit)
+{
+ u32 r;
+
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ *idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT;
+}
+
/**
* omap3_dpll_recalc - recalculate DPLL rate
* @clk: DPLL struct clk
u32 unlock_dll = 0;
u32 c;
unsigned long validrate, sdrcrate, mpurate;
- struct omap_sdrc_params *sp;
+ struct omap_sdrc_params *sdrc_cs0;
+ struct omap_sdrc_params *sdrc_cs1;
+ int ret;
if (!clk || !rate)
return -EINVAL;
else
sdrcrate >>= ((clk->rate / rate) >> 1);
- sp = omap2_sdrc_get_params(sdrcrate);
- if (!sp)
+ ret = omap2_sdrc_get_params(sdrcrate, &sdrc_cs0, &sdrc_cs1);
+ if (ret)
return -EINVAL;
if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) {
pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
validrate);
- pr_debug("clock: SDRC timing params used: %08x %08x %08x\n",
- sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb);
-
- omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla,
- sp->actim_ctrlb, new_div, unlock_dll, c,
- sp->mr, rate > clk->rate);
+ pr_debug("clock: SDRC CS0 timing params used:"
+ " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
+ sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
+ sdrc_cs0->actim_ctrlb, sdrc_cs0->mr);
+ if (sdrc_cs1)
+ pr_debug("clock: SDRC CS1 timing params used: "
+ " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
+ sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
+ sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
+
+ if (sdrc_cs1)
+ omap3_configure_core_dpll(
+ new_div, unlock_dll, c, rate > clk->rate,
+ sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
+ sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
+ sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
+ sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
+ else
+ omap3_configure_core_dpll(
+ new_div, unlock_dll, c, rate > clk->rate,
+ sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
+ sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
+ 0, 0, 0, 0);
return 0;
}
{ .parent = NULL }
};
-static struct clk ssi_ssr_fck = {
+static struct clk ssi_ssr_fck_3430es1 = {
.name = "ssi_ssr_fck",
.ops = &clkops_omap2_dflt,
.init = &omap2_init_clksel_parent,
.recalc = &omap2_clksel_recalc,
};
-static struct clk ssi_sst_fck = {
+static struct clk ssi_ssr_fck_3430es2 = {
+ .name = "ssi_ssr_fck",
+ .ops = &clkops_omap3430es2_ssi_wait,
+ .init = &omap2_init_clksel_parent,
+ .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+ .enable_bit = OMAP3430_EN_SSI_SHIFT,
+ .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+ .clksel_mask = OMAP3430_CLKSEL_SSI_MASK,
+ .clksel = ssi_ssr_clksel,
+ .clkdm_name = "core_l4_clkdm",
+ .recalc = &omap2_clksel_recalc,
+};
+
+static struct clk ssi_sst_fck_3430es1 = {
.name = "ssi_sst_fck",
.ops = &clkops_null,
- .parent = &ssi_ssr_fck,
+ .parent = &ssi_ssr_fck_3430es1,
+ .fixed_div = 2,
+ .recalc = &omap2_fixed_divisor_recalc,
+};
+
+static struct clk ssi_sst_fck_3430es2 = {
+ .name = "ssi_sst_fck",
+ .ops = &clkops_null,
+ .parent = &ssi_ssr_fck_3430es2,
.fixed_div = 2,
.recalc = &omap2_fixed_divisor_recalc,
};
.recalc = &followparent_recalc,
};
-static struct clk hsotgusb_ick = {
+static struct clk hsotgusb_ick_3430es1 = {
.name = "hsotgusb_ick",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
+ .parent = &core_l3_ick,
+ .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+ .enable_bit = OMAP3430_EN_HSOTGUSB_SHIFT,
+ .clkdm_name = "core_l3_clkdm",
+ .recalc = &followparent_recalc,
+};
+
+static struct clk hsotgusb_ick_3430es2 = {
+ .name = "hsotgusb_ick",
+ .ops = &clkops_omap3430es2_hsotgusb_wait,
.parent = &core_l3_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_HSOTGUSB_SHIFT,
.recalc = &followparent_recalc,
};
-static struct clk ssi_ick = {
+static struct clk ssi_ick_3430es1 = {
.name = "ssi_ick",
.ops = &clkops_omap2_dflt,
.parent = &ssi_l4_ick,
.recalc = &followparent_recalc,
};
+static struct clk ssi_ick_3430es2 = {
+ .name = "ssi_ick",
+ .ops = &clkops_omap3430es2_ssi_wait,
+ .parent = &ssi_l4_ick,
+ .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+ .enable_bit = OMAP3430_EN_SSI_SHIFT,
+ .clkdm_name = "core_l4_clkdm",
+ .recalc = &followparent_recalc,
+};
+
/* REVISIT: Technically the TRM claims that this is CORE_CLK based,
* but l4_ick makes more sense to me */
};
/* DSS */
-static struct clk dss1_alwon_fck = {
+static struct clk dss1_alwon_fck_3430es1 = {
.name = "dss1_alwon_fck",
.ops = &clkops_omap2_dflt,
.parent = &dpll4_m4x2_ck,
.recalc = &followparent_recalc,
};
+static struct clk dss1_alwon_fck_3430es2 = {
+ .name = "dss1_alwon_fck",
+ .ops = &clkops_omap3430es2_dss_usbhost_wait,
+ .parent = &dpll4_m4x2_ck,
+ .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
+ .enable_bit = OMAP3430_EN_DSS1_SHIFT,
+ .clkdm_name = "dss_clkdm",
+ .recalc = &followparent_recalc,
+};
+
static struct clk dss_tv_fck = {
.name = "dss_tv_fck",
.ops = &clkops_omap2_dflt,
.recalc = &followparent_recalc,
};
-static struct clk dss_ick = {
+static struct clk dss_ick_3430es1 = {
/* Handles both L3 and L4 clocks */
.name = "dss_ick",
.ops = &clkops_omap2_dflt,
.recalc = &followparent_recalc,
};
+static struct clk dss_ick_3430es2 = {
+ /* Handles both L3 and L4 clocks */
+ .name = "dss_ick",
+ .ops = &clkops_omap3430es2_dss_usbhost_wait,
+ .parent = &l4_ick,
+ .init = &omap2_init_clk_clkdm,
+ .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
+ .enable_bit = OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT,
+ .clkdm_name = "dss_clkdm",
+ .recalc = &followparent_recalc,
+};
+
/* CAM */
static struct clk cam_mclk = {
static struct clk usbhost_120m_fck = {
.name = "usbhost_120m_fck",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &dpll5_m2_ck,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
static struct clk usbhost_48m_fck = {
.name = "usbhost_48m_fck",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap3430es2_dss_usbhost_wait,
.parent = &omap_48m_fck,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
static struct clk usbhost_ick = {
/* Handles both L3 and L4 clocks */
.name = "usbhost_ick",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap3430es2_dss_usbhost_wait,
.parent = &l4_ick,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN),
* These registers appear once per CM module.
*/
-#define OMAP3430_CM_REVISION OMAP_CM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP3430_CM_SYSCONFIG OMAP_CM_REGADDR(OCP_MOD, 0x0010)
-#define OMAP3430_CM_POLCTRL OMAP_CM_REGADDR(OCP_MOD, 0x009c)
+#define OMAP3430_CM_REVISION OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP3430_CM_SYSCONFIG OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010)
+#define OMAP3430_CM_POLCTRL OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c)
#define OMAP3_CM_CLKOUT_CTRL_OFFSET 0x0070
#define OMAP3430_CM_CLKOUT_CTRL OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
return v;
}
-void __init omap2_init_common_hw(struct omap_sdrc_params *sp)
+void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
+ struct omap_sdrc_params *sdrc_cs1)
{
omap2_mux_init();
#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */
pwrdm_init(powerdomains_omap);
clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
omap2_clk_init();
- omap2_sdrc_init(sp);
+ omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
_omap2_init_reprogram_sdrc();
#endif
gpmc_init();
#include <mach/irqs.h>
#include <mach/dma.h>
-#include <mach/irqs.h>
#include <mach/mux.h>
#include <mach/cpu.h>
#include <mach/mcbsp.h>
.rx_irq = INT_24XX_MCBSP1_IRQ_RX,
.tx_irq = INT_24XX_MCBSP1_IRQ_TX,
.ops = &omap2_mcbsp_ops,
+ .buffer_size = 0x6F,
},
{
.phys_base = OMAP34XX_MCBSP2_BASE,
.rx_irq = INT_24XX_MCBSP2_IRQ_RX,
.tx_irq = INT_24XX_MCBSP2_IRQ_TX,
.ops = &omap2_mcbsp_ops,
+ .buffer_size = 0x3FF,
},
{
.phys_base = OMAP34XX_MCBSP3_BASE,
.rx_irq = INT_24XX_MCBSP3_IRQ_RX,
.tx_irq = INT_24XX_MCBSP3_IRQ_TX,
.ops = &omap2_mcbsp_ops,
+ .buffer_size = 0x6F,
},
{
.phys_base = OMAP34XX_MCBSP4_BASE,
.rx_irq = INT_24XX_MCBSP4_IRQ_RX,
.tx_irq = INT_24XX_MCBSP4_IRQ_TX,
.ops = &omap2_mcbsp_ops,
+ .buffer_size = 0x6F,
},
{
.phys_base = OMAP34XX_MCBSP5_BASE,
.rx_irq = INT_24XX_MCBSP5_IRQ_RX,
.tx_irq = INT_24XX_MCBSP5_IRQ_TX,
.ops = &omap2_mcbsp_ops,
+ .buffer_size = 0x6F,
},
};
#define OMAP34XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap34xx_mcbsp_pdata)
if (i != 0)
break;
ret = PTR_ERR(reg);
+ hsmmc[i].vcc = NULL;
goto err;
}
hsmmc[i].vcc = reg;
static void twl_mmc_cleanup(struct device *dev)
{
struct omap_mmc_platform_data *mmc = dev->platform_data;
+ int i;
gpio_free(mmc->slots[0].switch_pin);
+ for(i = 0; i < ARRAY_SIZE(hsmmc); i++) {
+ regulator_put(hsmmc[i].vcc);
+ regulator_put(hsmmc[i].vcc_aux);
+ }
}
#ifdef CONFIG_PM
OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
MUX_CFG_34XX("J25_34XX_GPIO170", 0x1c6,
OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
+
+/* OMAP3 SDRC CKE signals to SDR/DDR ram chips */
+MUX_CFG_34XX("H16_34XX_SDRC_CKE0", 0x262,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("H17_34XX_SDRC_CKE1", 0x264,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
};
#define OMAP34XX_PINS_SZ ARRAY_SIZE(omap34xx_pins)
#ifndef __ARCH_ARM_MACH_OMAP2_PM_H
#define __ARCH_ARM_MACH_OMAP2_PM_H
-extern int omap2_pm_init(void);
-extern int omap3_pm_init(void);
-
#ifdef CONFIG_PM_DEBUG
extern void omap2_pm_dump(int mode, int resume, unsigned int us);
extern int omap2_pm_debug;
WKUP_MOD, PM_WKEN);
}
-int __init omap2_pm_init(void)
+static int __init omap2_pm_init(void)
{
u32 l;
struct power_state {
struct powerdomain *pwrdm;
u32 next_state;
+#ifdef CONFIG_SUSPEND
u32 saved_state;
+#endif
struct list_head node;
};
local_irq_enable();
}
+#ifdef CONFIG_SUSPEND
+static suspend_state_t suspend_state;
+
static int omap3_pm_prepare(void)
{
disable_hlt();
restore:
/* Restore next_pwrsts */
list_for_each_entry(pwrst, &pwrst_list, node) {
- set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
if (state > pwrst->next_state) {
printk(KERN_INFO "Powerdomain (%s) didn't enter "
pwrst->pwrdm->name, pwrst->next_state);
ret = -1;
}
+ set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
}
if (ret)
printk(KERN_ERR "Could not enter target state in pm_suspend\n");
return ret;
}
-static int omap3_pm_enter(suspend_state_t state)
+static int omap3_pm_enter(suspend_state_t unused)
{
int ret = 0;
- switch (state) {
+ switch (suspend_state) {
case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
ret = omap3_pm_suspend();
enable_hlt();
}
+/* Hooks to enable / disable UART interrupts during suspend */
+static int omap3_pm_begin(suspend_state_t state)
+{
+ suspend_state = state;
+ omap_uart_enable_irqs(0);
+ return 0;
+}
+
+static void omap3_pm_end(void)
+{
+ suspend_state = PM_SUSPEND_ON;
+ omap_uart_enable_irqs(1);
+ return;
+}
+
static struct platform_suspend_ops omap_pm_ops = {
+ .begin = omap3_pm_begin,
+ .end = omap3_pm_end,
.prepare = omap3_pm_prepare,
.enter = omap3_pm_enter,
.finish = omap3_pm_finish,
.valid = suspend_valid_only_mem,
};
+#endif /* CONFIG_SUSPEND */
/**
/* Clear any pending PRCM interrupts */
prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+ /* Don't attach IVA interrupts */
+ prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
+ prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
+ prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
+ prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
+
+ /* Clear any pending 'reset' flags */
+ prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST);
+
+ /* Clear any pending PRCM interrupts */
+ prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
omap3_iva_idle();
omap3_d2d_idle();
}
return 0;
}
-int __init omap3_pm_init(void)
+static int __init omap3_pm_init(void)
{
struct power_state *pwrst, *tmp;
int ret;
_omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend,
omap34xx_cpu_suspend_sz);
+#ifdef CONFIG_SUSPEND
suspend_set_ops(&omap_pm_ops);
+#endif /* CONFIG_SUSPEND */
pm_idle = omap3_pm_idle;
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/delay.h>
#include <mach/common.h>
#include <mach/prcm.h>
static void __iomem *prm_base;
static void __iomem *cm_base;
+#define MAX_MODULE_ENABLE_WAIT 100000
+
u32 omap_prcm_get_reset_sources(void)
{
/* XXX This presumably needs modification for 34XX */
}
EXPORT_SYMBOL(cm_rmw_mod_reg_bits);
+/**
+ * omap2_cm_wait_idlest - wait for IDLEST bit to indicate module readiness
+ * @reg: physical address of module IDLEST register
+ * @mask: value to mask against to determine if the module is active
+ * @name: name of the clock (for printk)
+ *
+ * Returns 1 if the module indicated readiness in time, or 0 if it
+ * failed to enable in roughly MAX_MODULE_ENABLE_WAIT microseconds.
+ */
+int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name)
+{
+ int i = 0;
+ int ena = 0;
+
+ /*
+ * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
+ * 34xx reverses this, just to keep us on our toes
+ */
+ if (cpu_is_omap24xx())
+ ena = mask;
+ else if (cpu_is_omap34xx())
+ ena = 0;
+ else
+ BUG();
+
+ /* Wait for lock */
+ while (((__raw_readl(reg) & mask) != ena) &&
+ (i++ < MAX_MODULE_ENABLE_WAIT))
+ udelay(1);
+
+ if (i < MAX_MODULE_ENABLE_WAIT)
+ pr_debug("cm: Module associated with clock %s ready after %d "
+ "loops\n", name, i);
+ else
+ pr_err("cm: Module associated with clock %s didn't enable in "
+ "%d tries\n", name, MAX_MODULE_ENABLE_WAIT);
+
+ return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0;
+};
+
void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals)
{
prm_base = omap2_globals->prm;
#include <mach/sdrc.h>
#include "sdrc.h"
-static struct omap_sdrc_params *sdrc_init_params;
+static struct omap_sdrc_params *sdrc_init_params_cs0, *sdrc_init_params_cs1;
void __iomem *omap2_sdrc_base;
void __iomem *omap2_sms_base;
/**
* omap2_sdrc_get_params - return SDRC register values for a given clock rate
* @r: SDRC clock rate (in Hz)
+ * @sdrc_cs0: chip select 0 ram timings **
+ * @sdrc_cs1: chip select 1 ram timings **
*
* Return pre-calculated values for the SDRC_ACTIM_CTRLA,
- * SDRC_ACTIM_CTRLB, SDRC_RFR_CTRL, and SDRC_MR registers, for a given
- * SDRC clock rate 'r'. These parameters control various timing
- * delays in the SDRAM controller that are expressed in terms of the
- * number of SDRC clock cycles to wait; hence the clock rate
- * dependency. Note that sdrc_init_params must be sorted rate
- * descending. Also assumes that both chip-selects use the same
- * timing parameters. Returns a struct omap_sdrc_params * upon
- * success, or NULL upon failure.
+ * SDRC_ACTIM_CTRLB, SDRC_RFR_CTRL and SDRC_MR registers in sdrc_cs[01]
+ * structs,for a given SDRC clock rate 'r'.
+ * These parameters control various timing delays in the SDRAM controller
+ * that are expressed in terms of the number of SDRC clock cycles to
+ * wait; hence the clock rate dependency.
+ *
+ * Supports 2 different timing parameters for both chip selects.
+ *
+ * Note 1: the sdrc_init_params_cs[01] must be sorted rate descending.
+ * Note 2: If sdrc_init_params_cs_1 is not NULL it must be of same size
+ * as sdrc_init_params_cs_0.
+ *
+ * Fills in the struct omap_sdrc_params * for each chip select.
+ * Returns 0 upon success or -1 upon failure.
*/
-struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r)
+int omap2_sdrc_get_params(unsigned long r,
+ struct omap_sdrc_params **sdrc_cs0,
+ struct omap_sdrc_params **sdrc_cs1)
{
- struct omap_sdrc_params *sp;
+ struct omap_sdrc_params *sp0, *sp1;
- if (!sdrc_init_params)
- return NULL;
+ if (!sdrc_init_params_cs0)
+ return -1;
- sp = sdrc_init_params;
+ sp0 = sdrc_init_params_cs0;
+ sp1 = sdrc_init_params_cs1;
- while (sp->rate && sp->rate != r)
- sp++;
+ while (sp0->rate && sp0->rate != r) {
+ sp0++;
+ if (sdrc_init_params_cs1)
+ sp1++;
+ }
- if (!sp->rate)
- return NULL;
+ if (!sp0->rate)
+ return -1;
- return sp;
+ *sdrc_cs0 = sp0;
+ *sdrc_cs1 = sp1;
+ return 0;
}
/**
* omap2_sdrc_init - initialize SMS, SDRC devices on boot
- * @sp: pointer to a null-terminated list of struct omap_sdrc_params
+ * @sdrc_cs[01]: pointers to a null-terminated list of struct omap_sdrc_params
+ * Support for 2 chip selects timings
*
* Turn on smart idle modes for SDRAM scheduler and controller.
* Program a known-good configuration for the SDRC to deal with buggy
* bootloaders.
*/
-void __init omap2_sdrc_init(struct omap_sdrc_params *sp)
+void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
+ struct omap_sdrc_params *sdrc_cs1)
{
u32 l;
l |= (0x2 << 3);
sdrc_write_reg(l, SDRC_SYSCONFIG);
- sdrc_init_params = sp;
+ sdrc_init_params_cs0 = sdrc_cs0;
+ sdrc_init_params_cs1 = sdrc_cs1;
/* XXX Enable SRFRONIDLEREQ here also? */
+ /*
+ * PWDENA should not be set due to 34xx erratum 1.150 - PWDENA
+ * can cause random memory corruption
+ */
l = (1 << SDRC_POWER_EXTCLKDIS_SHIFT) |
- (1 << SDRC_POWER_PWDENA_SHIFT) |
(1 << SDRC_POWER_PAGEPOLICY_SHIFT);
sdrc_write_reg(l, SDRC_POWER);
}
struct plat_serial8250_port *p;
struct list_head node;
+ struct platform_device pdev;
#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
int context_valid;
#endif
};
-static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS];
static LIST_HEAD(uart_list);
-static struct plat_serial8250_port serial_platform_data[] = {
+static struct plat_serial8250_port serial_platform_data0[] = {
{
.membase = IO_ADDRESS(OMAP_UART1_BASE),
.mapbase = OMAP_UART1_BASE,
.regshift = 2,
.uartclk = OMAP24XX_BASE_BAUD * 16,
}, {
+ .flags = 0
+ }
+};
+
+static struct plat_serial8250_port serial_platform_data1[] = {
+ {
.membase = IO_ADDRESS(OMAP_UART2_BASE),
.mapbase = OMAP_UART2_BASE,
.irq = 73,
.regshift = 2,
.uartclk = OMAP24XX_BASE_BAUD * 16,
}, {
+ .flags = 0
+ }
+};
+
+static struct plat_serial8250_port serial_platform_data2[] = {
+ {
.membase = IO_ADDRESS(OMAP_UART3_BASE),
.mapbase = OMAP_UART3_BASE,
.irq = 74,
clk_disable(uart->fck);
}
+static void omap_uart_enable_wakeup(struct omap_uart_state *uart)
+{
+ /* Set wake-enable bit */
+ if (uart->wk_en && uart->wk_mask) {
+ u32 v = __raw_readl(uart->wk_en);
+ v |= uart->wk_mask;
+ __raw_writel(v, uart->wk_en);
+ }
+
+ /* Ensure IOPAD wake-enables are set */
+ if (cpu_is_omap34xx() && uart->padconf) {
+ u16 v = omap_ctrl_readw(uart->padconf);
+ v |= OMAP3_PADCONF_WAKEUPENABLE0;
+ omap_ctrl_writew(v, uart->padconf);
+ }
+}
+
+static void omap_uart_disable_wakeup(struct omap_uart_state *uart)
+{
+ /* Clear wake-enable bit */
+ if (uart->wk_en && uart->wk_mask) {
+ u32 v = __raw_readl(uart->wk_en);
+ v &= ~uart->wk_mask;
+ __raw_writel(v, uart->wk_en);
+ }
+
+ /* Ensure IOPAD wake-enables are cleared */
+ if (cpu_is_omap34xx() && uart->padconf) {
+ u16 v = omap_ctrl_readw(uart->padconf);
+ v &= ~OMAP3_PADCONF_WAKEUPENABLE0;
+ omap_ctrl_writew(v, uart->padconf);
+ }
+}
+
static void omap_uart_smart_idle_enable(struct omap_uart_state *uart,
int enable)
{
static void omap_uart_allow_sleep(struct omap_uart_state *uart)
{
+ if (device_may_wakeup(&uart->pdev.dev))
+ omap_uart_enable_wakeup(uart);
+ else
+ omap_uart_disable_wakeup(uart);
+
if (!uart->clocked)
return;
/* Check for normal UART wakeup */
if (__raw_readl(uart->wk_st) & uart->wk_mask)
omap_uart_block_sleep(uart);
-
return;
}
}
return IRQ_NONE;
}
-static u32 sleep_timeout = DEFAULT_TIMEOUT;
-
static void omap_uart_idle_init(struct omap_uart_state *uart)
{
- u32 v;
struct plat_serial8250_port *p = uart->p;
int ret;
uart->can_sleep = 0;
- uart->timeout = sleep_timeout;
+ uart->timeout = DEFAULT_TIMEOUT;
setup_timer(&uart->timer, omap_uart_idle_timer,
(unsigned long) uart);
mod_timer(&uart->timer, jiffies + uart->timeout);
uart->padconf = 0;
}
- /* Set wake-enable bit */
- if (uart->wk_en && uart->wk_mask) {
- v = __raw_readl(uart->wk_en);
- v |= uart->wk_mask;
- __raw_writel(v, uart->wk_en);
- }
-
- /* Ensure IOPAD wake-enables are set */
- if (cpu_is_omap34xx() && uart->padconf) {
- u16 v;
-
- v = omap_ctrl_readw(uart->padconf);
- v |= OMAP3_PADCONF_WAKEUPENABLE0;
- omap_ctrl_writew(v, uart->padconf);
- }
-
p->flags |= UPF_SHARE_IRQ;
ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED,
"serial idle", (void *)uart);
WARN_ON(ret);
}
-static ssize_t sleep_timeout_show(struct kobject *kobj,
- struct kobj_attribute *attr,
+void omap_uart_enable_irqs(int enable)
+{
+ int ret;
+ struct omap_uart_state *uart;
+
+ list_for_each_entry(uart, &uart_list, node) {
+ if (enable)
+ ret = request_irq(uart->p->irq, omap_uart_interrupt,
+ IRQF_SHARED, "serial idle", (void *)uart);
+ else
+ free_irq(uart->p->irq, (void *)uart);
+ }
+}
+
+static ssize_t sleep_timeout_show(struct device *dev,
+ struct device_attribute *attr,
char *buf)
{
- return sprintf(buf, "%u\n", sleep_timeout / HZ);
+ struct platform_device *pdev = container_of(dev,
+ struct platform_device, dev);
+ struct omap_uart_state *uart = container_of(pdev,
+ struct omap_uart_state, pdev);
+
+ return sprintf(buf, "%u\n", uart->timeout / HZ);
}
-static ssize_t sleep_timeout_store(struct kobject *kobj,
- struct kobj_attribute *attr,
+static ssize_t sleep_timeout_store(struct device *dev,
+ struct device_attribute *attr,
const char *buf, size_t n)
{
- struct omap_uart_state *uart;
+ struct platform_device *pdev = container_of(dev,
+ struct platform_device, dev);
+ struct omap_uart_state *uart = container_of(pdev,
+ struct omap_uart_state, pdev);
unsigned int value;
if (sscanf(buf, "%u", &value) != 1) {
printk(KERN_ERR "sleep_timeout_store: Invalid value\n");
return -EINVAL;
}
- sleep_timeout = value * HZ;
- list_for_each_entry(uart, &uart_list, node) {
- uart->timeout = sleep_timeout;
- if (uart->timeout)
- mod_timer(&uart->timer, jiffies + uart->timeout);
- else
- /* A zero value means disable timeout feature */
- omap_uart_block_sleep(uart);
- }
+
+ uart->timeout = value * HZ;
+ if (uart->timeout)
+ mod_timer(&uart->timer, jiffies + uart->timeout);
+ else
+ /* A zero value means disable timeout feature */
+ omap_uart_block_sleep(uart);
+
return n;
}
-static struct kobj_attribute sleep_timeout_attr =
- __ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store);
-
+DEVICE_ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store);
+#define DEV_CREATE_FILE(dev, attr) WARN_ON(device_create_file(dev, attr))
#else
static inline void omap_uart_idle_init(struct omap_uart_state *uart) {}
+#define DEV_CREATE_FILE(dev, attr)
#endif /* CONFIG_PM */
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = serial_platform_data,
+static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS] = {
+ {
+ .pdev = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = serial_platform_data0,
+ },
+ },
+ }, {
+ .pdev = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM1,
+ .dev = {
+ .platform_data = serial_platform_data1,
+ },
+ },
+ }, {
+ .pdev = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM2,
+ .dev = {
+ .platform_data = serial_platform_data2,
+ },
+ },
},
};
void __init omap_serial_init(void)
{
- int i, err;
+ int i;
const struct omap_uart_config *info;
char name[16];
if (info == NULL)
return;
- if (cpu_is_omap44xx()) {
- for (i = 0; i < OMAP_MAX_NR_PORTS; i++)
- serial_platform_data[i].irq += 32;
- }
for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
- struct plat_serial8250_port *p = serial_platform_data + i;
struct omap_uart_state *uart = &omap_uart[i];
+ struct platform_device *pdev = &uart->pdev;
+ struct device *dev = &pdev->dev;
+ struct plat_serial8250_port *p = dev->platform_data;
if (!(info->enabled_uarts & (1 << i))) {
p->membase = NULL;
uart->num = i;
p->private_data = uart;
uart->p = p;
- list_add(&uart->node, &uart_list);
+ list_add_tail(&uart->node, &uart_list);
+
+ if (cpu_is_omap44xx())
+ p->irq += 32;
omap_uart_enable_clocks(uart);
omap_uart_reset(uart);
omap_uart_idle_init(uart);
- }
-
- err = platform_device_register(&serial_device);
-
-#ifdef CONFIG_PM
- if (!err)
- err = sysfs_create_file(&serial_device.dev.kobj,
- &sleep_timeout_attr.attr);
-#endif
+ if (WARN_ON(platform_device_register(pdev)))
+ continue;
+ if ((cpu_is_omap34xx() && uart->padconf) ||
+ (uart->wk_en && uart->wk_mask)) {
+ device_init_wakeup(dev, true);
+ DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout);
+ }
+ }
}
-
.text
-/* r4 parameters */
+/* r1 parameters */
#define SDRC_NO_UNLOCK_DLL 0x0
#define SDRC_UNLOCK_DLL 0x1
/* SDRC_POWER bit settings */
#define SRFRONIDLEREQ_MASK 0x40
-#define PWDENA_MASK 0x4
/* CM_IDLEST1_CORE bit settings */
#define ST_SDRC_MASK 0x2
/*
* omap3_sram_configure_core_dpll - change DPLL3 M2 divider
- * r0 = new SDRC_RFR_CTRL register contents
- * r1 = new SDRC_ACTIM_CTRLA register contents
- * r2 = new SDRC_ACTIM_CTRLB register contents
- * r3 = new M2 divider setting (only 1 and 2 supported right now)
- * r4 = unlock SDRC DLL? (1 = yes, 0 = no). Only unlock DLL for
+ *
+ * Params passed in registers:
+ * r0 = new M2 divider setting (only 1 and 2 supported right now)
+ * r1 = unlock SDRC DLL? (1 = yes, 0 = no). Only unlock DLL for
* SDRC rates < 83MHz
- * r5 = number of MPU cycles to wait for SDRC to stabilize after
+ * r2 = number of MPU cycles to wait for SDRC to stabilize after
* reprogramming the SDRC when switching to a slower MPU speed
- * r6 = new SDRC_MR_0 register value
- * r7 = increasing SDRC rate? (1 = yes, 0 = no)
+ * r3 = increasing SDRC rate? (1 = yes, 0 = no)
+ *
+ * Params passed via the stack. The needed params will be copied in SRAM
+ * before use by the code in SRAM (SDRAM is not accessible during SDRC
+ * reconfiguration):
+ * new SDRC_RFR_CTRL_0 register contents
+ * new SDRC_ACTIM_CTRL_A_0 register contents
+ * new SDRC_ACTIM_CTRL_B_0 register contents
+ * new SDRC_MR_0 register value
+ * new SDRC_RFR_CTRL_1 register contents
+ * new SDRC_ACTIM_CTRL_A_1 register contents
+ * new SDRC_ACTIM_CTRL_B_1 register contents
+ * new SDRC_MR_1 register value
*
+ * If the param SDRC_RFR_CTRL_1 is 0, the parameters
+ * are not programmed into the SDRC CS1 registers
*/
ENTRY(omap3_sram_configure_core_dpll)
stmfd sp!, {r1-r12, lr} @ store regs to stack
- ldr r4, [sp, #52] @ pull extra args off the stack
- ldr r5, [sp, #56] @ load extra args from the stack
- ldr r6, [sp, #60] @ load extra args from the stack
- ldr r7, [sp, #64] @ load extra args from the stack
+
+ @ pull the extra args off the stack
+ @ and store them in SRAM
+ ldr r4, [sp, #52]
+ str r4, omap_sdrc_rfr_ctrl_0_val
+ ldr r4, [sp, #56]
+ str r4, omap_sdrc_actim_ctrl_a_0_val
+ ldr r4, [sp, #60]
+ str r4, omap_sdrc_actim_ctrl_b_0_val
+ ldr r4, [sp, #64]
+ str r4, omap_sdrc_mr_0_val
+ ldr r4, [sp, #68]
+ str r4, omap_sdrc_rfr_ctrl_1_val
+ cmp r4, #0 @ if SDRC_RFR_CTRL_1 is 0,
+ beq skip_cs1_params @ do not use cs1 params
+ ldr r4, [sp, #72]
+ str r4, omap_sdrc_actim_ctrl_a_1_val
+ ldr r4, [sp, #76]
+ str r4, omap_sdrc_actim_ctrl_b_1_val
+ ldr r4, [sp, #80]
+ str r4, omap_sdrc_mr_1_val
+skip_cs1_params:
dsb @ flush buffered writes to interconnect
- cmp r7, #1 @ if increasing SDRC clk rate,
+
+ cmp r3, #1 @ if increasing SDRC clk rate,
bleq configure_sdrc @ program the SDRC regs early (for RFR)
- cmp r4, #SDRC_UNLOCK_DLL @ set the intended DLL state
+ cmp r1, #SDRC_UNLOCK_DLL @ set the intended DLL state
bleq unlock_dll
blne lock_dll
bl sdram_in_selfrefresh @ put SDRAM in self refresh, idle SDRC
bl configure_core_dpll @ change the DPLL3 M2 divider
+ mov r12, r2
+ bl wait_clk_stable @ wait for SDRC to stabilize
bl enable_sdrc @ take SDRC out of idle
- cmp r4, #SDRC_UNLOCK_DLL @ wait for DLL status to change
+ cmp r1, #SDRC_UNLOCK_DLL @ wait for DLL status to change
bleq wait_dll_unlock
blne wait_dll_lock
- cmp r7, #1 @ if increasing SDRC clk rate,
+ cmp r3, #1 @ if increasing SDRC clk rate,
beq return_to_sdram @ return to SDRAM code, otherwise,
bl configure_sdrc @ reprogram SDRC regs now
- mov r12, r5
- bl wait_clk_stable @ wait for SDRC to stabilize
return_to_sdram:
isb @ prevent speculative exec past here
mov r0, #0 @ return value
unlock_dll:
ldr r11, omap3_sdrc_dlla_ctrl
ldr r12, [r11]
- and r12, r12, #FIXEDDELAY_MASK
+ bic r12, r12, #FIXEDDELAY_MASK
orr r12, r12, #FIXEDDELAY_DEFAULT
orr r12, r12, #DLLIDLE_MASK
str r12, [r11] @ (no OCP barrier needed)
ldr r12, [r11] @ read the contents of SDRC_POWER
mov r9, r12 @ keep a copy of SDRC_POWER bits
orr r12, r12, #SRFRONIDLEREQ_MASK @ enable self refresh on idle
- bic r12, r12, #PWDENA_MASK @ clear PWDENA
str r12, [r11] @ write back to SDRC_POWER register
ldr r12, [r11] @ posted-write barrier for SDRC
idle_sdrc:
ldr r12, [r11]
ldr r10, core_m2_mask_val @ modify m2 for core dpll
and r12, r12, r10
- orr r12, r12, r3, lsl #CORE_DPLL_CLKOUT_DIV_SHIFT
+ orr r12, r12, r0, lsl #CORE_DPLL_CLKOUT_DIV_SHIFT
str r12, [r11]
ldr r12, [r11] @ posted-write barrier for CM
bx lr
bne wait_dll_unlock
bx lr
configure_sdrc:
- ldr r11, omap3_sdrc_rfr_ctrl
- str r0, [r11]
- ldr r11, omap3_sdrc_actim_ctrla
- str r1, [r11]
- ldr r11, omap3_sdrc_actim_ctrlb
- str r2, [r11]
+ ldr r12, omap_sdrc_rfr_ctrl_0_val @ fetch value from SRAM
+ ldr r11, omap3_sdrc_rfr_ctrl_0 @ fetch addr from SRAM
+ str r12, [r11] @ store
+ ldr r12, omap_sdrc_actim_ctrl_a_0_val
+ ldr r11, omap3_sdrc_actim_ctrl_a_0
+ str r12, [r11]
+ ldr r12, omap_sdrc_actim_ctrl_b_0_val
+ ldr r11, omap3_sdrc_actim_ctrl_b_0
+ str r12, [r11]
+ ldr r12, omap_sdrc_mr_0_val
ldr r11, omap3_sdrc_mr_0
- str r6, [r11]
- ldr r6, [r11] @ posted-write barrier for SDRC
+ str r12, [r11]
+ ldr r12, omap_sdrc_rfr_ctrl_1_val
+ cmp r12, #0 @ if SDRC_RFR_CTRL_1 is 0,
+ beq skip_cs1_prog @ do not program cs1 params
+ ldr r11, omap3_sdrc_rfr_ctrl_1
+ str r12, [r11]
+ ldr r12, omap_sdrc_actim_ctrl_a_1_val
+ ldr r11, omap3_sdrc_actim_ctrl_a_1
+ str r12, [r11]
+ ldr r12, omap_sdrc_actim_ctrl_b_1_val
+ ldr r11, omap3_sdrc_actim_ctrl_b_1
+ str r12, [r11]
+ ldr r12, omap_sdrc_mr_1_val
+ ldr r11, omap3_sdrc_mr_1
+ str r12, [r11]
+skip_cs1_prog:
+ ldr r12, [r11] @ posted-write barrier for SDRC
bx lr
omap3_sdrc_power:
.word OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST)
omap3_cm_iclken1_core:
.word OMAP34XX_CM_REGADDR(CORE_MOD, CM_ICLKEN1)
-omap3_sdrc_rfr_ctrl:
+
+omap3_sdrc_rfr_ctrl_0:
.word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_0)
-omap3_sdrc_actim_ctrla:
+omap3_sdrc_rfr_ctrl_1:
+ .word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_1)
+omap3_sdrc_actim_ctrl_a_0:
.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_0)
-omap3_sdrc_actim_ctrlb:
+omap3_sdrc_actim_ctrl_a_1:
+ .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_1)
+omap3_sdrc_actim_ctrl_b_0:
.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_0)
+omap3_sdrc_actim_ctrl_b_1:
+ .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_1)
omap3_sdrc_mr_0:
.word OMAP34XX_SDRC_REGADDR(SDRC_MR_0)
+omap3_sdrc_mr_1:
+ .word OMAP34XX_SDRC_REGADDR(SDRC_MR_1)
+omap_sdrc_rfr_ctrl_0_val:
+ .word 0xDEADBEEF
+omap_sdrc_rfr_ctrl_1_val:
+ .word 0xDEADBEEF
+omap_sdrc_actim_ctrl_a_0_val:
+ .word 0xDEADBEEF
+omap_sdrc_actim_ctrl_a_1_val:
+ .word 0xDEADBEEF
+omap_sdrc_actim_ctrl_b_0_val:
+ .word 0xDEADBEEF
+omap_sdrc_actim_ctrl_b_1_val:
+ .word 0xDEADBEEF
+omap_sdrc_mr_0_val:
+ .word 0xDEADBEEF
+omap_sdrc_mr_1_val:
+ .word 0xDEADBEEF
+
omap3_sdrc_dlla_status:
.word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
omap3_sdrc_dlla_ctrl:
ENTRY(omap3_sram_configure_core_dpll_sz)
.word . - omap3_sram_configure_core_dpll
+
.resource = musb_resources,
};
-#ifdef CONFIG_NOP_USB_XCEIV
-static u64 nop_xceiv_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device nop_xceiv_device = {
- .name = "nop_usb_xceiv",
- .id = -1,
- .dev = {
- .dma_mask = &nop_xceiv_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = NULL,
- },
-};
-#endif
-
void __init usb_musb_init(void)
{
if (cpu_is_omap243x())
*/
musb_plat.clock = "ick";
-#ifdef CONFIG_NOP_USB_XCEIV
- if (platform_device_register(&nop_xceiv_device) < 0) {
- printk(KERN_ERR "Unable to register NOP-XCEIV device\n");
- return;
- }
-#endif
-
if (platform_device_register(&musb_device) < 0) {
printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
return;
static void em_x270_battery_low(void)
{
+#if defined(CONFIG_APM_EMULATION)
apm_queue_event(APM_LOW_BATTERY);
+#endif
}
static void em_x270_battery_critical(void)
{
+#if defined(CONFIG_APM_EMULATION)
apm_queue_event(APM_CRITICAL_SUSPEND);
+#endif
}
struct da9030_battery_info em_x270_batterty_info = {
#include <sound/core.h>
#include <sound/pcm.h>
+#include <sound/ac97_codec.h>
/*
* @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95)
* a -1 value means no gpio will be used for reset
+ * @codec_pdata: AC97 codec platform_data
* reset_gpio should only be specified for pxa27x CPUs where a silicon
* bug prevents correct operation of the reset line. If not specified,
void (*resume)(void *);
void *priv;
int reset_gpio;
+ void *codec_pdata[AC97_BUS_MAX_DEVICES];
} pxa2xx_audio_ops_t;
extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops);
#define GPIO37_ULPI_DATA_OUT_7 MFP_CFG(GPIO37, AF3)
#define GPIO33_ULPI_OTG_INTR MFP_CFG(GPIO33, AF1)
-#define ULPI_DIR MFP_CFG_DRV(ULPI_DIR, MFP_AF0, MFP_DS01X)
-#define ULPI_NXT MFP_CFG_DRV(ULPI_NXT, MFP_AF0, MFP_DS01X)
-#define ULPI_STP MFP_CFG_DRV(ULPI_STP, MFP_AF0, MFP_DS01X)
+#define ULPI_DIR MFP_CFG_DRV(ULPI_DIR, AF0, DS01X)
+#define ULPI_NXT MFP_CFG_DRV(ULPI_NXT, AF0, DS01X)
+#define ULPI_STP MFP_CFG_DRV(ULPI_STP, AF0, DS01X)
#endif /* CONFIG_CPU_PXA310 */
#endif /* __ASM_ARCH_MFP_PXA300_H */
GPIO38_GPIO, /* wifi ready */
GPIO81_GPIO, /* wifi reset */
+ /* FFUART */
+ GPIO34_FFUART_RXD,
+ GPIO39_FFUART_TXD,
+
/* HDD */
GPIO98_GPIO, /* HDD reset */
GPIO115_GPIO, /* HDD power */
/* PWM */
GPIO16_PWM0_OUT,
+ /* FFUART */
+ GPIO34_FFUART_RXD,
+ GPIO39_FFUART_TXD,
+
/* MISC */
GPIO10_GPIO, /* hotsync button */
GPIO90_GPIO, /* power detect */
GPIO76_LCD_PCLK,
GPIO77_LCD_BIAS,
+ /* FFUART */
+ GPIO34_FFUART_RXD,
+ GPIO39_FFUART_TXD,
+
/* MISC. */
GPIO10_GPIO, /* hotsync button */
GPIO12_GPIO, /* power detect */
static struct clk_lookup pxa3xx_clkregs[] = {
INIT_CLKREG(&clk_pxa3xx_pout, NULL, "CLK_POUT"),
/* Power I2C clock is always on */
- INIT_CLKREG(&clk_dummy, "pxa2xx-i2c.1", NULL),
+ INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL),
INIT_CLKREG(&clk_pxa3xx_lcd, "pxa2xx-fb", NULL),
INIT_CLKREG(&clk_pxa3xx_camera, NULL, "CAMCLK"),
INIT_CLKREG(&clk_pxa3xx_ac97, NULL, "AC97CLK"),
static void treo680_irda_shutdown(struct device *dev)
{
- gpio_free(GPIO_NR_TREO680_AMP_EN);
+ gpio_free(GPIO_NR_TREO680_IR_EN);
}
static struct pxaficp_platform_data treo680_ficp_info = {
for (i = 0; i < NUM_LCD_DETECT_PINS; i++) {
id = id << 1;
gpio = mfp_to_gpio(lcd_detect_pins[i]);
+ gpio_request(gpio, "LCD_ID_PINS");
gpio_direction_input(gpio);
if (gpio_get_value(gpio))
id = id | 0x1;
+ gpio_free(gpio);
}
/* lcd id, flush out bit 1 */
for (i = 0; i < NUM_LCD_DETECT_PINS; i++) {
id = id << 1;
gpio = mfp_to_gpio(lcd_detect_pins[i]);
+ gpio_request(gpio, "LCD_ID_PINS");
gpio_direction_input(gpio);
if (gpio_get_value(gpio))
id = id | 0x1;
+ gpio_free(gpio);
}
/* lcd id, flush out bit 1 */
static struct i2c_board_info realview_i2c_board_info[] = {
{
- I2C_BOARD_INFO("rtc-ds1307", 0xd0 >> 1),
- .type = "ds1338",
+ I2C_BOARD_INFO("ds1338", 0xd0 >> 1),
},
};
return NULL;
chip = &s3c24xx_gpios[pin/32];
- return (S3C2410_GPIO_OFFSET(pin) > chip->chip.ngpio) ? chip : NULL;
+ return (S3C2410_GPIO_OFFSET(pin) < chip->chip.ngpio) ? chip : NULL;
}
#endif /* __ASM_ARCH_GPIO_CORE_H */
for (i = 0; i < NR_IRQS; i++)
set_bit(i, (unsigned long *) &mask[0]);
u300_enable_intcon_clock();
- vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], 0);
- vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], 0);
+ vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]);
+ vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]);
}
}
};
-static void u300_init_check_chip(void)
+static void __init u300_init_check_chip(void)
{
u16 val;
static struct i2c_board_info versatile_i2c_board_info[] = {
{
- I2C_BOARD_INFO("rtc-ds1307", 0xd0 >> 1),
- .type = "ds1338",
+ I2C_BOARD_INFO("ds1338", 0xd0 >> 1),
},
};
printk("%d pages swap cached\n", cached);
}
+static void __init find_node_limits(int node, struct meminfo *mi,
+ unsigned long *min, unsigned long *max_low, unsigned long *max_high)
+{
+ int i;
+
+ *min = -1UL;
+ *max_low = *max_high = 0;
+
+ for_each_nodebank(i, mi, node) {
+ struct membank *bank = &mi->bank[i];
+ unsigned long start, end;
+
+ start = bank_pfn_start(bank);
+ end = bank_pfn_end(bank);
+
+ if (*min > start)
+ *min = start;
+ if (*max_high < end)
+ *max_high = end;
+ if (bank->highmem)
+ continue;
+ if (*max_low < end)
+ *max_low = end;
+ }
+}
+
/*
* FIXME: We really want to avoid allocating the bootmap bitmap
* over the top of the initrd. Hopefully, this is located towards
#endif
}
-static unsigned long __init bootmem_init_node(int node, struct meminfo *mi)
+static void __init bootmem_init_node(int node, struct meminfo *mi,
+ unsigned long start_pfn, unsigned long end_pfn)
{
- unsigned long start_pfn, end_pfn, boot_pfn;
+ unsigned long boot_pfn;
unsigned int boot_pages;
pg_data_t *pgdat;
int i;
- start_pfn = -1UL;
- end_pfn = 0;
-
/*
- * Calculate the pfn range, and map the memory banks for this node.
+ * Map the memory banks for this node.
*/
for_each_nodebank(i, mi, node) {
struct membank *bank = &mi->bank[i];
- unsigned long start, end;
- start = bank_pfn_start(bank);
- end = bank_pfn_end(bank);
-
- if (start_pfn > start)
- start_pfn = start;
- if (end_pfn < end)
- end_pfn = end;
-
- map_memory_bank(bank);
+ if (!bank->highmem)
+ map_memory_bank(bank);
}
- /*
- * If there is no memory in this node, ignore it.
- */
- if (end_pfn == 0)
- return end_pfn;
-
/*
* Allocate the bootmem bitmap page.
*/
for_each_nodebank(i, mi, node) {
struct membank *bank = &mi->bank[i];
- free_bootmem_node(pgdat, bank_phys_start(bank), bank_phys_size(bank));
+ if (!bank->highmem)
+ free_bootmem_node(pgdat, bank_phys_start(bank), bank_phys_size(bank));
memory_present(node, bank_pfn_start(bank), bank_pfn_end(bank));
}
*/
reserve_bootmem_node(pgdat, boot_pfn << PAGE_SHIFT,
boot_pages << PAGE_SHIFT, BOOTMEM_DEFAULT);
-
- return end_pfn;
}
static void __init bootmem_reserve_initrd(int node)
static void __init bootmem_free_node(int node, struct meminfo *mi)
{
unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES];
- unsigned long start_pfn, end_pfn;
- pg_data_t *pgdat = NODE_DATA(node);
+ unsigned long min, max_low, max_high;
int i;
- start_pfn = pgdat->bdata->node_min_pfn;
- end_pfn = pgdat->bdata->node_low_pfn;
+ find_node_limits(node, mi, &min, &max_low, &max_high);
/*
* initialise the zones within this node.
*/
memset(zone_size, 0, sizeof(zone_size));
- memset(zhole_size, 0, sizeof(zhole_size));
/*
* The size of this node has already been determined. If we need
* to do anything fancy with the allocation of this memory to the
* zones, now is the time to do it.
*/
- zone_size[0] = end_pfn - start_pfn;
+ zone_size[0] = max_low - min;
+#ifdef CONFIG_HIGHMEM
+ zone_size[ZONE_HIGHMEM] = max_high - max_low;
+#endif
/*
* For each bank in this node, calculate the size of the holes.
* holes = node_size - sum(bank_sizes_in_node)
*/
- zhole_size[0] = zone_size[0];
- for_each_nodebank(i, mi, node)
- zhole_size[0] -= bank_pfn_size(&mi->bank[i]);
+ memcpy(zhole_size, zone_size, sizeof(zhole_size));
+ for_each_nodebank(i, mi, node) {
+ int idx = 0;
+#ifdef CONFIG_HIGHMEM
+ if (mi->bank[i].highmem)
+ idx = ZONE_HIGHMEM;
+#endif
+ zhole_size[idx] -= bank_pfn_size(&mi->bank[i]);
+ }
/*
* Adjust the sizes according to any special requirements for
*/
arch_adjust_zones(node, zone_size, zhole_size);
- free_area_init_node(node, zone_size, start_pfn, zhole_size);
+ free_area_init_node(node, zone_size, min, zhole_size);
}
void __init bootmem_init(void)
{
struct meminfo *mi = &meminfo;
- unsigned long memend_pfn = 0;
+ unsigned long min, max_low, max_high;
int node, initrd_node;
/*
*/
initrd_node = check_initrd(mi);
+ max_low = max_high = 0;
+
/*
* Run through each node initialising the bootmem allocator.
*/
for_each_node(node) {
- unsigned long end_pfn = bootmem_init_node(node, mi);
+ unsigned long node_low, node_high;
+
+ find_node_limits(node, mi, &min, &node_low, &node_high);
+
+ if (node_low > max_low)
+ max_low = node_low;
+ if (node_high > max_high)
+ max_high = node_high;
+
+ /*
+ * If there is no memory in this node, ignore it.
+ * (We can't have nodes which have no lowmem)
+ */
+ if (node_low == 0)
+ continue;
+
+ bootmem_init_node(node, mi, min, node_low);
/*
* Reserve any special node zero regions.
*/
if (node == initrd_node)
bootmem_reserve_initrd(node);
-
- /*
- * Remember the highest memory PFN.
- */
- if (end_pfn > memend_pfn)
- memend_pfn = end_pfn;
}
/*
for_each_node(node)
bootmem_free_node(node, mi);
- high_memory = __va((memend_pfn << PAGE_SHIFT) - 1) + 1;
+ high_memory = __va((max_low << PAGE_SHIFT) - 1) + 1;
/*
* This doesn't seem to be used by the Linux memory manager any
* Note: max_low_pfn and max_pfn reflect the number of _pages_ in
* the system, not the maximum PFN.
*/
- max_pfn = max_low_pfn = memend_pfn - PHYS_PFN_OFFSET;
+ max_low_pfn = max_low - PHYS_PFN_OFFSET;
+ max_pfn = max_high - PHYS_PFN_OFFSET;
}
static inline int free_area(unsigned long pfn, unsigned long end, char *s)
static void __init sanity_check_meminfo(void)
{
- int i, j;
+ int i, j, highmem = 0;
for (i = 0, j = 0; i < meminfo.nr_banks; i++) {
struct membank *bank = &meminfo.bank[j];
*bank = meminfo.bank[i];
#ifdef CONFIG_HIGHMEM
+ if (__va(bank->start) > VMALLOC_MIN ||
+ __va(bank->start) < (void *)PAGE_OFFSET)
+ highmem = 1;
+
+ bank->highmem = highmem;
+
/*
* Split those memory banks which are partially overlapping
* the vmalloc area greatly simplifying things later.
i++;
bank[1].size -= VMALLOC_MIN - __va(bank->start);
bank[1].start = __pa(VMALLOC_MIN - 1) + 1;
+ bank[1].highmem = highmem = 1;
j++;
}
bank->size = VMALLOC_MIN - __va(bank->start);
#define MX31_PIN_I2C_DAT__SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
#define MX31_PIN_DCD_DTE1__I2C2_SDA IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2)
#define MX31_PIN_RI_DTE1__I2C2_SCL IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_CSPI2_SS2__I2C3_SDA IOMUX_MODE(MX31_PIN_CSPI2_SS2, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI2_SCLK__I2C3_SCL IOMUX_MODE(MX31_PIN_CSPI2_SCLK, IOMUX_CONFIG_ALT1)
#define MX31_PIN_CSI_D4__CSI_D4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSI_D5__CSI_D5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSI_D6__CSI_D6 IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC)
/* Ensure desired rate is within allowed range. Some govenors
* (ondemand) will just pass target_freq=0 to get the minimum. */
- if (target_freq < policy->cpuinfo.min_freq)
- target_freq = policy->cpuinfo.min_freq;
- if (target_freq > policy->cpuinfo.max_freq)
- target_freq = policy->cpuinfo.max_freq;
+ if (target_freq < policy->min)
+ target_freq = policy->min;
+ if (target_freq > policy->max)
+ target_freq = policy->max;
freqs.old = omap_getspeed(0);
freqs.new = clk_round_rate(mpu_clk, target_freq * 1000) / 1000;
cur_lch = next_lch;
} while (next_lch != -1);
- } else if (cpu_class_is_omap2()) {
+ } else if (cpu_is_omap242x() ||
+ (cpu_is_omap243x() && omap_type() <= OMAP2430_REV_ES1_0)) {
+
/* Errata: Need to write lch even if not using chaining */
dma_write(lch, CLNK_CTRL(lch));
}
void omap_dma_link_lch(int lch_head, int lch_queue)
{
if (omap_dma_in_1510_mode()) {
+ if (lch_head == lch_queue) {
+ dma_write(dma_read(CCR(lch_head)) | (3 << 8),
+ CCR(lch_head));
+ return;
+ }
printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
BUG();
return;
void omap_dma_unlink_lch(int lch_head, int lch_queue)
{
if (omap_dma_in_1510_mode()) {
+ if (lch_head == lch_queue) {
+ dma_write(dma_read(CCR(lch_head)) & ~(3 << 8),
+ CCR(lch_head));
+ return;
+ }
printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
BUG();
return;
__raw_writel(l, reg);
}
-static int __omap_get_gpio_datain(int gpio)
+static int _get_gpio_datain(struct gpio_bank *bank, int gpio)
{
- struct gpio_bank *bank;
void __iomem *reg;
if (check_gpio(gpio) < 0)
return -EINVAL;
- bank = get_gpio_bank(gpio);
reg = bank->base;
switch (bank->method) {
#ifdef CONFIG_ARCH_OMAP1
& (1 << get_gpio_index(gpio))) != 0;
}
+static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
+{
+ void __iomem *reg;
+
+ if (check_gpio(gpio) < 0)
+ return -EINVAL;
+ reg = bank->base;
+
+ switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
+ case METHOD_MPUIO:
+ reg += OMAP_MPUIO_OUTPUT;
+ break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+ case METHOD_GPIO_1510:
+ reg += OMAP1510_GPIO_DATA_OUTPUT;
+ break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+ case METHOD_GPIO_1610:
+ reg += OMAP1610_GPIO_DATAOUT;
+ break;
+#endif
+#ifdef CONFIG_ARCH_OMAP730
+ case METHOD_GPIO_730:
+ reg += OMAP730_GPIO_DATA_OUTPUT;
+ break;
+#endif
+#ifdef CONFIG_ARCH_OMAP850
+ case METHOD_GPIO_850:
+ reg += OMAP850_GPIO_DATA_OUTPUT;
+ break;
+#endif
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
+ case METHOD_GPIO_24XX:
+ reg += OMAP24XX_GPIO_DATAOUT;
+ break;
+#endif
+ default:
+ return -EINVAL;
+ }
+
+ return (__raw_readl(reg) & (1 << get_gpio_index(gpio))) != 0;
+}
+
#define MOD_REG_BIT(reg, bit_mask, set) \
do { \
int l = __raw_readl(base + reg); \
struct gpio_bank *bank = get_irq_chip_data(irq);
_set_gpio_irqenable(bank, gpio, 0);
+ _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
}
static void gpio_unmask_irq(unsigned int irq)
unsigned int gpio = irq - IH_GPIO_BASE;
struct gpio_bank *bank = get_irq_chip_data(irq);
unsigned int irq_mask = 1 << get_gpio_index(gpio);
+ struct irq_desc *desc = irq_to_desc(irq);
+ u32 trigger = desc->status & IRQ_TYPE_SENSE_MASK;
+
+ if (trigger)
+ _set_gpio_triggering(bank, get_gpio_index(gpio), trigger);
/* For level-triggered GPIOs, the clearing must be done after
* the HW source is cleared, thus after the handler has run */
return 0;
}
+static int gpio_is_input(struct gpio_bank *bank, int mask)
+{
+ void __iomem *reg = bank->base;
+
+ switch (bank->method) {
+ case METHOD_MPUIO:
+ reg += OMAP_MPUIO_IO_CNTL;
+ break;
+ case METHOD_GPIO_1510:
+ reg += OMAP1510_GPIO_DIR_CONTROL;
+ break;
+ case METHOD_GPIO_1610:
+ reg += OMAP1610_GPIO_DIRECTION;
+ break;
+ case METHOD_GPIO_730:
+ reg += OMAP730_GPIO_DIR_CONTROL;
+ break;
+ case METHOD_GPIO_850:
+ reg += OMAP850_GPIO_DIR_CONTROL;
+ break;
+ case METHOD_GPIO_24XX:
+ reg += OMAP24XX_GPIO_OE;
+ break;
+ }
+ return __raw_readl(reg) & mask;
+}
+
static int gpio_get(struct gpio_chip *chip, unsigned offset)
{
- return __omap_get_gpio_datain(chip->base + offset);
+ struct gpio_bank *bank;
+ void __iomem *reg;
+ int gpio;
+ u32 mask;
+
+ gpio = chip->base + offset;
+ bank = get_gpio_bank(gpio);
+ reg = bank->base;
+ mask = 1 << get_gpio_index(gpio);
+
+ if (gpio_is_input(bank, mask))
+ return _get_gpio_datain(bank, gpio);
+ else
+ return _get_gpio_dataout(bank, gpio);
}
static int gpio_output(struct gpio_chip *chip, unsigned offset, int value)
#include <linux/debugfs.h>
#include <linux/seq_file.h>
-static int gpio_is_input(struct gpio_bank *bank, int mask)
-{
- void __iomem *reg = bank->base;
-
- switch (bank->method) {
- case METHOD_MPUIO:
- reg += OMAP_MPUIO_IO_CNTL;
- break;
- case METHOD_GPIO_1510:
- reg += OMAP1510_GPIO_DIR_CONTROL;
- break;
- case METHOD_GPIO_1610:
- reg += OMAP1610_GPIO_DIRECTION;
- break;
- case METHOD_GPIO_730:
- reg += OMAP730_GPIO_DIR_CONTROL;
- break;
- case METHOD_GPIO_850:
- reg += OMAP850_GPIO_DIR_CONTROL;
- break;
- case METHOD_GPIO_24XX:
- reg += OMAP24XX_GPIO_OE;
- break;
- }
- return __raw_readl(reg) & mask;
-}
-
-
static int dbg_gpio_show(struct seq_file *s, void *unused)
{
unsigned i, j, gpio;
struct clkops {
int (*enable)(struct clk *);
void (*disable)(struct clk *);
+ void (*find_idlest)(struct clk *, void __iomem **, u8 *);
+ void (*find_companion)(struct clk *, void __iomem **, u8 *);
};
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \
cpu_is_omap44xx())
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
- defined(CONFIG_ARCH_OMAP4)
-
/* Various silicon revisions for omap2 */
#define OMAP242X_CLASS 0x24200024
#define OMAP2420_REV_ES1_0 0x24200024
int omap_chip_is(struct omap_chip_id oci);
void omap2_check_revision(void);
-
-#endif /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */
extern void omap1_init_common_hw(void);
extern void omap2_map_common_io(void);
-extern void omap2_init_common_hw(struct omap_sdrc_params *sp);
+extern void omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
+ struct omap_sdrc_params *sdrc_cs1);
#define __arch_ioremap(p,s,t) omap_ioremap(p,s,t)
#define __arch_iounmap(v) omap_iounmap(v)
#define OMAP_MCBSP_REG_XCERG 0x74
#define OMAP_MCBSP_REG_XCERH 0x78
#define OMAP_MCBSP_REG_SYSCON 0x8C
+#define OMAP_MCBSP_REG_THRSH2 0x90
+#define OMAP_MCBSP_REG_THRSH1 0x94
+#define OMAP_MCBSP_REG_IRQST 0xA0
+#define OMAP_MCBSP_REG_IRQEN 0xA4
+#define OMAP_MCBSP_REG_WAKEUPEN 0xA8
#define OMAP_MCBSP_REG_XCCR 0xAC
#define OMAP_MCBSP_REG_RCCR 0xB0
#define RDISABLE 0x0001
/********************** McBSP SYSCONFIG bit definitions ********************/
+#define CLOCKACTIVITY(value) ((value)<<8)
+#define SIDLEMODE(value) ((value)<<3)
+#define ENAWAKEUP 0x0004
#define SOFTRST 0x0002
+/********************** McBSP DMA operating modes **************************/
+#define MCBSP_DMA_MODE_ELEMENT 0
+#define MCBSP_DMA_MODE_THRESHOLD 1
+#define MCBSP_DMA_MODE_FRAME 2
+
+/********************** McBSP WAKEUPEN bit definitions *********************/
+#define XEMPTYEOFEN 0x4000
+#define XRDYEN 0x0400
+#define XEOFEN 0x0200
+#define XFSXEN 0x0100
+#define XSYNCERREN 0x0080
+#define RRDYEN 0x0008
+#define REOFEN 0x0004
+#define RFSREN 0x0002
+#define RSYNCERREN 0x0001
+
/* we don't do multichannel for now */
struct omap_mcbsp_reg_cfg {
u16 spcr2;
u8 dma_rx_sync, dma_tx_sync;
u16 rx_irq, tx_irq;
struct omap_mcbsp_ops *ops;
+#ifdef CONFIG_ARCH_OMAP34XX
+ u16 buffer_size;
+#endif
};
struct omap_mcbsp {
struct omap_mcbsp_platform_data *pdata;
struct clk *iclk;
struct clk *fclk;
+#ifdef CONFIG_ARCH_OMAP34XX
+ int dma_op_mode;
+ u16 max_tx_thres;
+ u16 max_rx_thres;
+#endif
};
extern struct omap_mcbsp **mcbsp_ptr;
extern int omap_mcbsp_count;
void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
int size);
void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config);
+#ifdef CONFIG_ARCH_OMAP34XX
+void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold);
+void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold);
+u16 omap_mcbsp_get_max_tx_threshold(unsigned int id);
+u16 omap_mcbsp_get_max_rx_threshold(unsigned int id);
+int omap_mcbsp_get_dma_op_mode(unsigned int id);
+#else
+static inline void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold)
+{ }
+static inline void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold)
+{ }
+static inline u16 omap_mcbsp_get_max_tx_threshold(unsigned int id) { return 0; }
+static inline u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) { return 0; }
+static inline int omap_mcbsp_get_dma_op_mode(unsigned int id) { return 0; }
+#endif
int omap_mcbsp_request(unsigned int id);
void omap_mcbsp_free(unsigned int id);
-void omap_mcbsp_start(unsigned int id);
-void omap_mcbsp_stop(unsigned int id);
+void omap_mcbsp_start(unsigned int id, int tx, int rx);
+void omap_mcbsp_stop(unsigned int id, int tx, int rx);
void omap_mcbsp_xmit_word(unsigned int id, u32 word);
u32 omap_mcbsp_recv_word(unsigned int id);
AE5_34XX_GPIO143,
H19_34XX_GPIO164_OUT,
J25_34XX_GPIO170,
+
+ /* OMAP3 SDRC CKE signals to SDR/DDR ram chips */
+ H16_34XX_SDRC_CKE0,
+ H17_34XX_SDRC_CKE1,
};
struct omap_mux_cfg {
u32 omap_prcm_get_reset_sources(void);
void omap_prcm_arch_reset(char mode);
+int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name);
#endif
#define SDRC_ACTIM_CTRL_A_0 0x09c
#define SDRC_ACTIM_CTRL_B_0 0x0a0
#define SDRC_RFR_CTRL_0 0x0a4
+#define SDRC_MR_1 0x0B4
+#define SDRC_ACTIM_CTRL_A_1 0x0C4
+#define SDRC_ACTIM_CTRL_B_1 0x0C8
+#define SDRC_RFR_CTRL_1 0x0D4
/*
* These values represent the number of memory clock cycles between
u32 mr;
};
-void __init omap2_sdrc_init(struct omap_sdrc_params *sp);
-struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r);
+void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
+ struct omap_sdrc_params *sdrc_cs1);
+int omap2_sdrc_get_params(unsigned long r,
+ struct omap_sdrc_params **sdrc_cs0,
+ struct omap_sdrc_params **sdrc_cs1);
#ifdef CONFIG_ARCH_OMAP2
extern void omap_uart_prepare_suspend(void);
extern void omap_uart_prepare_idle(int num);
extern void omap_uart_resume_idle(int num);
+extern void omap_uart_enable_irqs(int enable);
#endif
#endif
u32 mem_type);
extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
-extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl,
- u32 sdrc_actim_ctrla,
- u32 sdrc_actim_ctrlb, u32 m2,
- u32 unlock_dll, u32 f, u32 sdrc_mr,
- u32 inc);
+extern u32 omap3_configure_core_dpll(
+ u32 m2, u32 unlock_dll, u32 f, u32 inc,
+ u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+ u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+ u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+ u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
/* Do not use these */
extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
u32 mem_type);
extern unsigned long omap243x_sram_reprogram_sdrc_sz;
-
-extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl,
- u32 sdrc_actim_ctrla,
- u32 sdrc_actim_ctrlb, u32 m2,
- u32 unlock_dll, u32 f, u32 sdrc_mr,
- u32 inc);
+extern u32 omap3_sram_configure_core_dpll(
+ u32 m2, u32 unlock_dll, u32 f, u32 inc,
+ u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+ u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+ u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+ u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
extern unsigned long omap3_sram_configure_core_dpll_sz;
#endif
}
EXPORT_SYMBOL(omap_mcbsp_config);
+#ifdef CONFIG_ARCH_OMAP34XX
+/*
+ * omap_mcbsp_set_tx_threshold configures how to deal
+ * with transmit threshold. the threshold value and handler can be
+ * configure in here.
+ */
+void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold)
+{
+ struct omap_mcbsp *mcbsp;
+ void __iomem *io_base;
+
+ if (!cpu_is_omap34xx())
+ return;
+
+ if (!omap_mcbsp_check_valid_id(id)) {
+ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+ return;
+ }
+ mcbsp = id_to_mcbsp_ptr(id);
+ io_base = mcbsp->io_base;
+
+ OMAP_MCBSP_WRITE(io_base, THRSH2, threshold);
+}
+EXPORT_SYMBOL(omap_mcbsp_set_tx_threshold);
+
+/*
+ * omap_mcbsp_set_rx_threshold configures how to deal
+ * with receive threshold. the threshold value and handler can be
+ * configure in here.
+ */
+void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold)
+{
+ struct omap_mcbsp *mcbsp;
+ void __iomem *io_base;
+
+ if (!cpu_is_omap34xx())
+ return;
+
+ if (!omap_mcbsp_check_valid_id(id)) {
+ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+ return;
+ }
+ mcbsp = id_to_mcbsp_ptr(id);
+ io_base = mcbsp->io_base;
+
+ OMAP_MCBSP_WRITE(io_base, THRSH1, threshold);
+}
+EXPORT_SYMBOL(omap_mcbsp_set_rx_threshold);
+
+/*
+ * omap_mcbsp_get_max_tx_thres just return the current configured
+ * maximum threshold for transmission
+ */
+u16 omap_mcbsp_get_max_tx_threshold(unsigned int id)
+{
+ struct omap_mcbsp *mcbsp;
+
+ if (!omap_mcbsp_check_valid_id(id)) {
+ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+ return -ENODEV;
+ }
+ mcbsp = id_to_mcbsp_ptr(id);
+
+ return mcbsp->max_tx_thres;
+}
+EXPORT_SYMBOL(omap_mcbsp_get_max_tx_threshold);
+
+/*
+ * omap_mcbsp_get_max_rx_thres just return the current configured
+ * maximum threshold for reception
+ */
+u16 omap_mcbsp_get_max_rx_threshold(unsigned int id)
+{
+ struct omap_mcbsp *mcbsp;
+
+ if (!omap_mcbsp_check_valid_id(id)) {
+ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+ return -ENODEV;
+ }
+ mcbsp = id_to_mcbsp_ptr(id);
+
+ return mcbsp->max_rx_thres;
+}
+EXPORT_SYMBOL(omap_mcbsp_get_max_rx_threshold);
+
+/*
+ * omap_mcbsp_get_dma_op_mode just return the current configured
+ * operating mode for the mcbsp channel
+ */
+int omap_mcbsp_get_dma_op_mode(unsigned int id)
+{
+ struct omap_mcbsp *mcbsp;
+ int dma_op_mode;
+
+ if (!omap_mcbsp_check_valid_id(id)) {
+ printk(KERN_ERR "%s: Invalid id (%u)\n", __func__, id + 1);
+ return -ENODEV;
+ }
+ mcbsp = id_to_mcbsp_ptr(id);
+
+ spin_lock_irq(&mcbsp->lock);
+ dma_op_mode = mcbsp->dma_op_mode;
+ spin_unlock_irq(&mcbsp->lock);
+
+ return dma_op_mode;
+}
+EXPORT_SYMBOL(omap_mcbsp_get_dma_op_mode);
+
+static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp)
+{
+ /*
+ * Enable wakup behavior, smart idle and all wakeups
+ * REVISIT: some wakeups may be unnecessary
+ */
+ if (cpu_is_omap34xx()) {
+ u16 syscon;
+
+ syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON);
+ syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03));
+
+ spin_lock_irq(&mcbsp->lock);
+ if (mcbsp->dma_op_mode == MCBSP_DMA_MODE_THRESHOLD) {
+ syscon |= (ENAWAKEUP | SIDLEMODE(0x02) |
+ CLOCKACTIVITY(0x02));
+ OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN,
+ XRDYEN | RRDYEN);
+ } else {
+ syscon |= SIDLEMODE(0x01);
+ }
+ spin_unlock_irq(&mcbsp->lock);
+
+ OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
+ }
+}
+
+static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp)
+{
+ /*
+ * Disable wakup behavior, smart idle and all wakeups
+ */
+ if (cpu_is_omap34xx()) {
+ u16 syscon;
+
+ syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON);
+ syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03));
+ /*
+ * HW bug workaround - If no_idle mode is taken, we need to
+ * go to smart_idle before going to always_idle, or the
+ * device will not hit retention anymore.
+ */
+ syscon |= SIDLEMODE(0x02);
+ OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
+
+ syscon &= ~(SIDLEMODE(0x03));
+ OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
+
+ OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, 0);
+ }
+}
+#else
+static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp) {}
+static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp) {}
+#endif
+
/*
* We can choose between IRQ based or polled IO.
* This needs to be called before omap_mcbsp_request().
clk_enable(mcbsp->iclk);
clk_enable(mcbsp->fclk);
+ /* Do procedure specific to omap34xx arch, if applicable */
+ omap34xx_mcbsp_request(mcbsp);
+
/*
* Make sure that transmitter, receiver and sample-rate generator are
* not running before activating IRQs.
if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
mcbsp->pdata->ops->free(id);
+ /* Do procedure specific to omap34xx arch, if applicable */
+ omap34xx_mcbsp_free(mcbsp);
+
clk_disable(mcbsp->fclk);
clk_disable(mcbsp->iclk);
EXPORT_SYMBOL(omap_mcbsp_free);
/*
- * Here we start the McBSP, by enabling the sample
- * generator, both transmitter and receivers,
- * and the frame sync.
+ * Here we start the McBSP, by enabling transmitter, receiver or both.
+ * If no transmitter or receiver is active prior calling, then sample-rate
+ * generator and frame sync are started.
*/
-void omap_mcbsp_start(unsigned int id)
+void omap_mcbsp_start(unsigned int id, int tx, int rx)
{
struct omap_mcbsp *mcbsp;
void __iomem *io_base;
+ int idle;
u16 w;
if (!omap_mcbsp_check_valid_id(id)) {
mcbsp->rx_word_length = (OMAP_MCBSP_READ(io_base, RCR1) >> 5) & 0x7;
mcbsp->tx_word_length = (OMAP_MCBSP_READ(io_base, XCR1) >> 5) & 0x7;
- /* Start the sample generator */
- w = OMAP_MCBSP_READ(io_base, SPCR2);
- OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 6));
+ idle = !((OMAP_MCBSP_READ(io_base, SPCR2) |
+ OMAP_MCBSP_READ(io_base, SPCR1)) & 1);
+
+ if (idle) {
+ /* Start the sample generator */
+ w = OMAP_MCBSP_READ(io_base, SPCR2);
+ OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 6));
+ }
/* Enable transmitter and receiver */
+ tx &= 1;
w = OMAP_MCBSP_READ(io_base, SPCR2);
- OMAP_MCBSP_WRITE(io_base, SPCR2, w | 1);
+ OMAP_MCBSP_WRITE(io_base, SPCR2, w | tx);
+ rx &= 1;
w = OMAP_MCBSP_READ(io_base, SPCR1);
- OMAP_MCBSP_WRITE(io_base, SPCR1, w | 1);
+ OMAP_MCBSP_WRITE(io_base, SPCR1, w | rx);
- udelay(100);
+ /*
+ * Worst case: CLKSRG*2 = 8000khz: (1/8000) * 2 * 2 usec
+ * REVISIT: 100us may give enough time for two CLKSRG, however
+ * due to some unknown PM related, clock gating etc. reason it
+ * is now at 500us.
+ */
+ udelay(500);
- /* Start frame sync */
- w = OMAP_MCBSP_READ(io_base, SPCR2);
- OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 7));
+ if (idle) {
+ /* Start frame sync */
+ w = OMAP_MCBSP_READ(io_base, SPCR2);
+ OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 7));
+ }
+
+ if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+ /* Release the transmitter and receiver */
+ w = OMAP_MCBSP_READ(io_base, XCCR);
+ w &= ~(tx ? XDISABLE : 0);
+ OMAP_MCBSP_WRITE(io_base, XCCR, w);
+ w = OMAP_MCBSP_READ(io_base, RCCR);
+ w &= ~(rx ? RDISABLE : 0);
+ OMAP_MCBSP_WRITE(io_base, RCCR, w);
+ }
/* Dump McBSP Regs */
omap_mcbsp_dump_reg(id);
}
EXPORT_SYMBOL(omap_mcbsp_start);
-void omap_mcbsp_stop(unsigned int id)
+void omap_mcbsp_stop(unsigned int id, int tx, int rx)
{
struct omap_mcbsp *mcbsp;
void __iomem *io_base;
+ int idle;
u16 w;
if (!omap_mcbsp_check_valid_id(id)) {
io_base = mcbsp->io_base;
/* Reset transmitter */
+ tx &= 1;
+ if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+ w = OMAP_MCBSP_READ(io_base, XCCR);
+ w |= (tx ? XDISABLE : 0);
+ OMAP_MCBSP_WRITE(io_base, XCCR, w);
+ }
w = OMAP_MCBSP_READ(io_base, SPCR2);
- OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1));
+ OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~tx);
/* Reset receiver */
+ rx &= 1;
+ if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+ w = OMAP_MCBSP_READ(io_base, RCCR);
+ w |= (tx ? RDISABLE : 0);
+ OMAP_MCBSP_WRITE(io_base, RCCR, w);
+ }
w = OMAP_MCBSP_READ(io_base, SPCR1);
- OMAP_MCBSP_WRITE(io_base, SPCR1, w & ~(1));
+ OMAP_MCBSP_WRITE(io_base, SPCR1, w & ~rx);
- /* Reset the sample rate generator */
- w = OMAP_MCBSP_READ(io_base, SPCR2);
- OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1 << 6));
+ idle = !((OMAP_MCBSP_READ(io_base, SPCR2) |
+ OMAP_MCBSP_READ(io_base, SPCR1)) & 1);
+
+ if (idle) {
+ /* Reset the sample rate generator */
+ w = OMAP_MCBSP_READ(io_base, SPCR2);
+ OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1 << 6));
+ }
}
EXPORT_SYMBOL(omap_mcbsp_stop);
}
EXPORT_SYMBOL(omap_mcbsp_set_spi_mode);
+#ifdef CONFIG_ARCH_OMAP34XX
+#define max_thres(m) (mcbsp->pdata->buffer_size)
+#define valid_threshold(m, val) ((val) <= max_thres(m))
+#define THRESHOLD_PROP_BUILDER(prop) \
+static ssize_t prop##_show(struct device *dev, \
+ struct device_attribute *attr, char *buf) \
+{ \
+ struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); \
+ \
+ return sprintf(buf, "%u\n", mcbsp->prop); \
+} \
+ \
+static ssize_t prop##_store(struct device *dev, \
+ struct device_attribute *attr, \
+ const char *buf, size_t size) \
+{ \
+ struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); \
+ unsigned long val; \
+ int status; \
+ \
+ status = strict_strtoul(buf, 0, &val); \
+ if (status) \
+ return status; \
+ \
+ if (!valid_threshold(mcbsp, val)) \
+ return -EDOM; \
+ \
+ mcbsp->prop = val; \
+ return size; \
+} \
+ \
+static DEVICE_ATTR(prop, 0644, prop##_show, prop##_store);
+
+THRESHOLD_PROP_BUILDER(max_tx_thres);
+THRESHOLD_PROP_BUILDER(max_rx_thres);
+
+static const char *dma_op_modes[] = {
+ "element", "threshold", "frame",
+};
+
+static ssize_t dma_op_mode_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);
+ int dma_op_mode, i = 0;
+ ssize_t len = 0;
+ const char * const *s;
+
+ spin_lock_irq(&mcbsp->lock);
+ dma_op_mode = mcbsp->dma_op_mode;
+ spin_unlock_irq(&mcbsp->lock);
+
+ for (s = &dma_op_modes[i]; i < ARRAY_SIZE(dma_op_modes); s++, i++) {
+ if (dma_op_mode == i)
+ len += sprintf(buf + len, "[%s] ", *s);
+ else
+ len += sprintf(buf + len, "%s ", *s);
+ }
+ len += sprintf(buf + len, "\n");
+
+ return len;
+}
+
+static ssize_t dma_op_mode_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);
+ const char * const *s;
+ int i = 0;
+
+ for (s = &dma_op_modes[i]; i < ARRAY_SIZE(dma_op_modes); s++, i++)
+ if (sysfs_streq(buf, *s))
+ break;
+
+ if (i == ARRAY_SIZE(dma_op_modes))
+ return -EINVAL;
+
+ spin_lock_irq(&mcbsp->lock);
+ if (!mcbsp->free) {
+ size = -EBUSY;
+ goto unlock;
+ }
+ mcbsp->dma_op_mode = i;
+
+unlock:
+ spin_unlock_irq(&mcbsp->lock);
+
+ return size;
+}
+
+static DEVICE_ATTR(dma_op_mode, 0644, dma_op_mode_show, dma_op_mode_store);
+
+static const struct attribute *additional_attrs[] = {
+ &dev_attr_max_tx_thres.attr,
+ &dev_attr_max_rx_thres.attr,
+ &dev_attr_dma_op_mode.attr,
+ NULL,
+};
+
+static const struct attribute_group additional_attr_group = {
+ .attrs = (struct attribute **)additional_attrs,
+};
+
+static inline int __devinit omap_additional_add(struct device *dev)
+{
+ return sysfs_create_group(&dev->kobj, &additional_attr_group);
+}
+
+static inline void __devexit omap_additional_remove(struct device *dev)
+{
+ sysfs_remove_group(&dev->kobj, &additional_attr_group);
+}
+
+static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp)
+{
+ mcbsp->dma_op_mode = MCBSP_DMA_MODE_ELEMENT;
+ if (cpu_is_omap34xx()) {
+ mcbsp->max_tx_thres = max_thres(mcbsp);
+ mcbsp->max_rx_thres = max_thres(mcbsp);
+ /*
+ * REVISIT: Set dmap_op_mode to THRESHOLD as default
+ * for mcbsp2 instances.
+ */
+ if (omap_additional_add(mcbsp->dev))
+ dev_warn(mcbsp->dev,
+ "Unable to create additional controls\n");
+ } else {
+ mcbsp->max_tx_thres = -EINVAL;
+ mcbsp->max_rx_thres = -EINVAL;
+ }
+}
+
+static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp)
+{
+ if (cpu_is_omap34xx())
+ omap_additional_remove(mcbsp->dev);
+}
+#else
+static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp) {}
+static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp) {}
+#endif /* CONFIG_ARCH_OMAP34XX */
+
/*
* McBSP1 and McBSP3 are directly mapped on 1610 and 1510.
* 730 has only 2 McBSP, and both of them are MPU peripherals.
mcbsp->dev = &pdev->dev;
mcbsp_ptr[id] = mcbsp;
platform_set_drvdata(pdev, mcbsp);
+
+ /* Initialize mcbsp properties for OMAP34XX if needed / applicable */
+ omap34xx_device_init(mcbsp);
+
return 0;
err_fclk:
mcbsp->pdata->ops->free)
mcbsp->pdata->ops->free(mcbsp->id);
+ omap34xx_device_exit(mcbsp);
+
clk_disable(mcbsp->fclk);
clk_disable(mcbsp->iclk);
clk_put(mcbsp->fclk);
#define OMAP2_SRAM_VA 0xe3000000
#define OMAP2_SRAM_PUB_VA (OMAP2_SRAM_VA + 0x800)
#define OMAP3_SRAM_PA 0x40200000
-#define OMAP3_SRAM_VA 0xd7000000
+#define OMAP3_SRAM_VA 0xe3000000
#define OMAP3_SRAM_PUB_PA 0x40208000
-#define OMAP3_SRAM_PUB_VA 0xd7008000
+#define OMAP3_SRAM_PUB_VA (OMAP3_SRAM_VA + 0x8000)
#define OMAP4_SRAM_PA 0x40200000 /*0x402f0000*/
#define OMAP4_SRAM_VA 0xd7000000 /*0xd70f0000*/
#ifdef CONFIG_ARCH_OMAP3
-static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl,
- u32 sdrc_actim_ctrla,
- u32 sdrc_actim_ctrlb,
- u32 m2, u32 unlock_dll,
- u32 f, u32 sdrc_mr, u32 inc);
-u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla,
- u32 sdrc_actim_ctrlb, u32 m2, u32 unlock_dll,
- u32 f, u32 sdrc_mr, u32 inc)
+static u32 (*_omap3_sram_configure_core_dpll)(
+ u32 m2, u32 unlock_dll, u32 f, u32 inc,
+ u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+ u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+ u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+ u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
+
+u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc,
+ u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+ u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+ u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+ u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1)
{
BUG_ON(!_omap3_sram_configure_core_dpll);
- return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl,
- sdrc_actim_ctrla,
- sdrc_actim_ctrlb, m2,
- unlock_dll, f, sdrc_mr, inc);
+ return _omap3_sram_configure_core_dpll(
+ m2, unlock_dll, f, inc,
+ sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0,
+ sdrc_actim_ctrl_b_0, sdrc_mr_0,
+ sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1,
+ sdrc_actim_ctrl_b_1, sdrc_mr_1);
}
/* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */
#ifndef __PLAT_GPIO_H
#define __PLAT_GPIO_H
+#include <linux/init.h>
+
/*
* GENERIC_GPIO primitives.
*/
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/sysdev.h>
-#include <linux/bootmem.h>
+#include <linux/slab.h>
#include <mach/gpio.h>
int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1;
struct pxa_gpio_chip *chips;
- /* this is early, we have to use bootmem allocator, and we really
- * want this to be allocated dynamically for different 'gpio_end'
- */
- chips = alloc_bootmem_low(nbanks * sizeof(struct pxa_gpio_chip));
+ chips = kzalloc(nbanks * sizeof(struct pxa_gpio_chip), GFP_KERNEL);
if (chips == NULL) {
pr_err("%s: failed to allocate GPIO chips\n", __func__);
return -ENOMEM;
}
- memset(chips, 0, nbanks * sizeof(struct pxa_gpio_chip));
-
for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) {
struct gpio_chip *c = &chips[i].chip;
--- /dev/null
+/* arch/arm/plat-s3c/include/plat/audio-simtec.h
+ *
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Simtec Audio support.
+*/
+
+/**
+ * struct s3c24xx_audio_simtec_pdata - platform data for simtec audio
+ * @use_mpllin: Select codec clock from MPLLin
+ * @output_cdclk: Need to output CDCLK to the codec
+ * @have_mic: Set if we have a MIC socket
+ * @have_lout: Set if we have a LineOut socket
+ * @amp_gpio: GPIO pin to enable the AMP
+ * @amp_gain: Option GPIO to control AMP gain
+ */
+struct s3c24xx_audio_simtec_pdata {
+ unsigned int use_mpllin:1;
+ unsigned int output_cdclk:1;
+
+ unsigned int have_mic:1;
+ unsigned int have_lout:1;
+
+ int amp_gpio;
+ int amp_gain[2];
+
+ void (*startup)(void);
+};
+
+extern int simtec_audio_add(const char *codec_name,
+ struct s3c24xx_audio_simtec_pdata *pdata);
#define S3C2412_IISCON_RXDMA_ACTIVE (1 << 1)
#define S3C2412_IISCON_IIS_ACTIVE (1 << 0)
+#define S3C64XX_IISMOD_BLC_16BIT (0 << 13)
+#define S3C64XX_IISMOD_BLC_8BIT (1 << 13)
+#define S3C64XX_IISMOD_BLC_24BIT (2 << 13)
+#define S3C64XX_IISMOD_BLC_MASK (3 << 13)
+
#define S3C64XX_IISMOD_IMS_PCLK (0 << 10)
#define S3C64XX_IISMOD_IMS_SYSMUX (1 << 10)
/* calculate the MISCCR setting for the clock */
- if (parent == &clk_xtal)
+ if (parent == &clk_mpll)
source = S3C2410_MISCCR_CLK0_MPLL;
else if (parent == &clk_upll)
source = S3C2410_MISCCR_CLK0_UPLL;
tcmp = duty_ns / tin_ns;
tcmp = tcnt - tcmp;
+ /* the pwm hw only checks the compare register after a decrement,
+ so the pin never toggles if tcmp = tcnt */
+ if (tcmp == tcnt)
+ tcmp--;
pwm_dbg(pwm, "tin_ns=%lu, tcmp=%ld/%lu\n", tin_ns, tcmp, tcnt);
* this.
*/
-#include <plat/regs-gpio.h>
-
static void s3c64xx_cpu_suspend(void)
{
unsigned long tmp;
u32 div;
if (parent < rate)
- return rate;
+ return parent;
div = (parent / rate) - 1;
if (div > armclk_mask)
div = clk_get_rate(clk->parent) / rate;
val = __raw_readl(S3C_CLK_DIV0);
- val &= armclk_mask;
+ val &= ~armclk_mask;
val |= (div - 1);
__raw_writel(val, S3C_CLK_DIV0);
#include <linux/sysdev.h>
#include <linux/string.h>
#include <linux/bitops.h>
-#include <linux/sysdev.h>
#include <linux/irq.h>
#include <mach/hardware.h>
.debounce_max = 20,
.debounce_rep = 4,
.debounce_tol = 5,
+
+ .keep_vref_on = true,
+ .settle_delay_usecs = 500,
+ .penirq_recheck_delay_usecs = 100,
};
static struct spi_board_info __initdata spi1_board_info[] = {
quicklist_free_page(QUICK_PT, NULL, pte);
}
-#define __pte_free_tlb(tlb,pte) \
+#define __pte_free_tlb(tlb,pte,addr) \
do { \
pgtable_page_dtor(pte); \
tlb_remove_page((tlb), pte); \
#define TIF_MEMDIE 6
#define TIF_RESTORE_SIGMASK 7 /* restore signal mask in do_signal */
#define TIF_CPU_GOING_TO_SLEEP 8 /* CPU is entering sleep 0 mode */
+#define TIF_NOTIFY_RESUME 9 /* callback before returning to user */
#define TIF_FREEZE 29
#define TIF_DEBUG 30 /* debugging enabled */
#define TIF_USERSPACE 31 /* true if FS sets userspace */
#define _TIF_MEMDIE (1 << TIF_MEMDIE)
#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK)
#define _TIF_CPU_GOING_TO_SLEEP (1 << TIF_CPU_GOING_TO_SLEEP)
+#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
#define _TIF_FREEZE (1 << TIF_FREEZE)
/* Note: The masks below must never span more than 16 bits! */
/* work to do on interrupt/exception return */
#define _TIF_WORK_MASK \
((1 << TIF_SIGPENDING) \
+ | _TIF_NOTIFY_RESUME \
| (1 << TIF_NEED_RESCHED) \
| (1 << TIF_POLLING_NRFLAG) \
| (1 << TIF_BREAKPOINT) \
| (1 << TIF_RESTORE_SIGMASK))
/* work to do on any return to userspace */
-#define _TIF_ALLWORK_MASK (_TIF_WORK_MASK | (1 << TIF_SYSCALL_TRACE))
+#define _TIF_ALLWORK_MASK (_TIF_WORK_MASK | (1 << TIF_SYSCALL_TRACE) | \
+ _TIF_NOTIFY_RESUME)
/* work to do on return from debug mode */
#define _TIF_DBGWORK_MASK (_TIF_WORK_MASK & ~(1 << TIF_BREAKPOINT))
ld.w r1, r0[TI_flags]
rjmp 1b
-2: mov r2, _TIF_SIGPENDING | _TIF_RESTORE_SIGMASK
+2: mov r2, _TIF_SIGPENDING | _TIF_RESTORE_SIGMASK | _TIF_NOTIFY_RESUME
tst r1, r2
breq 3f
unmask_interrupts
#include <linux/ptrace.h>
#include <linux/unistd.h>
#include <linux/freezer.h>
+#include <linux/tracehook.h>
#include <asm/uaccess.h>
#include <asm/ucontext.h>
if (ti->flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
do_signal(regs, ¤t->blocked, syscall);
+
+ if (ti->flags & _TIF_NOTIFY_RESUME) {
+ clear_thread_flag(TIF_NOTIFY_RESUME);
+ tracehook_notify_resume(regs);
+ if (current->replacement_session_keyring)
+ key_replace_session_keyring();
+ }
}
brne 1f
/* At this point, "from" is word-aligned */
-2: sub r10, 4
- mov r9, r12
+2: mov r9, r12
+5: sub r10, 4
brlt 4f
3: ld.w r8, r11++
/* Handle unaligned "from" pointer */
1: sub r10, 4
+ movlt r9, r12
brlt 4b
add r10, r9
lsl r9, 2
st.b r12++, r8
ld.ub r8, r11++
st.b r12++, r8
- rjmp 2b
+ mov r8, r12
+ add pc, pc, r9
+ sub r8, 1
+ nop
+ sub r8, 1
+ nop
+ sub r8, 1
+ nop
+ mov r9, r8
+ rjmp 5b
[--sp] = RETN;
[--sp] = RETE;
[--sp] = SEQSTAT;
-#ifdef CONFIG_KGDB
- r1.l = lo(IPEND);
- r1.h = hi(IPEND);
+#ifdef CONFIG_DEBUG_KERNEL
+ p1.l = lo(IPEND);
+ p1.h = hi(IPEND);
+ r1 = [p1];
[--sp] = r1;
#else
[--sp] = r0; /* Skip IPEND as well. */
struct task_struct *idle;
unsigned int imemctl;
unsigned int dmemctl;
- unsigned long loops_per_jiffy;
unsigned long dcache_invld_count;
unsigned long icache_invld_count;
};
extern void ack_bad_irq(unsigned int irq);
#define ack_bad_irq ack_bad_irq
+/* Define until common code gets sane defaults */
+#define HARDIRQ_BITS 9
+
#include <asm-generic/hardirq.h>
#endif
/* Always use CHIPID, to work around ANOMALY_05000234 */
uint32_t revid = (bfin_read_CHIPID() & CHIPID_VERSION) >> 28;
-#ifdef CONFIG_BF52x
- /* ANOMALY_05000357
+#ifdef _BOOTROM_GET_DXE_ADDRESS_TWI
+ /*
+ * ANOMALY_05000364
* Incorrect Revision Number in DSPID Register
*/
- if (revid == 0)
- switch (bfin_read16(_BOOTROM_GET_DXE_ADDRESS_TWI)) {
- case 0x0010:
- revid = 0;
- break;
- case 0x2796:
- revid = 1;
- break;
- default:
- revid = 0xFFFF;
- break;
- }
+ if (ANOMALY_05000364 &&
+ bfin_read16(_BOOTROM_GET_DXE_ADDRESS_TWI) == 0x2796)
+ revid = 1;
#endif
+
return revid;
}
BUG_ON(src % 4);
BUG_ON(size % 4);
- /* Force a sync in case a previous config reset on this channel
- * occurred. This is needed so subsequent writes to DMA registers
- * are not spuriously lost/corrupted.
- */
- __builtin_bfin_ssync();
-
src_ch = 0;
/* Find an avalible memDMA channel */
while (1) {
- if (!src_ch || src_ch == (struct dma_register *)MDMA_S1_NEXT_DESC_PTR) {
- dst_ch = (struct dma_register *)MDMA_D0_NEXT_DESC_PTR;
- src_ch = (struct dma_register *)MDMA_S0_NEXT_DESC_PTR;
- } else {
+ if (src_ch == (struct dma_register *)MDMA_S0_NEXT_DESC_PTR) {
dst_ch = (struct dma_register *)MDMA_D1_NEXT_DESC_PTR;
src_ch = (struct dma_register *)MDMA_S1_NEXT_DESC_PTR;
+ } else {
+ dst_ch = (struct dma_register *)MDMA_D0_NEXT_DESC_PTR;
+ src_ch = (struct dma_register *)MDMA_S0_NEXT_DESC_PTR;
}
- if (!bfin_read16(&src_ch->cfg)) {
+ if (!bfin_read16(&src_ch->cfg))
+ break;
+ else if (bfin_read16(&dst_ch->irq_status) & DMA_DONE) {
+ bfin_write16(&src_ch->cfg, 0);
break;
- } else {
- if (bfin_read16(&src_ch->irq_status) & DMA_DONE)
- bfin_write16(&src_ch->cfg, 0);
}
-
}
+ /* Force a sync in case a previous config reset on this channel
+ * occurred. This is needed so subsequent writes to DMA registers
+ * are not spuriously lost/corrupted.
+ */
+ __builtin_bfin_ssync();
+
/* Destination */
bfin_write32(&dst_ch->start_addr, dst);
bfin_write16(&dst_ch->x_count, size >> 2);
*port_fer[bank] = gpio_bank_saved[bank].fer;
#endif
gpio_array[bank]->inen = gpio_bank_saved[bank].inen;
+ gpio_array[bank]->data_set = gpio_bank_saved[bank].data
+ & gpio_bank_saved[bank].dir;
gpio_array[bank]->dir = gpio_bank_saved[bank].dir;
gpio_array[bank]->polar = gpio_bank_saved[bank].polar;
gpio_array[bank]->edge = gpio_bank_saved[bank].edge;
gpio_array[bank]->both = gpio_bank_saved[bank].both;
-
- gpio_array[bank]->data_set = gpio_bank_saved[bank].data
- | gpio_bank_saved[bank].dir;
-
gpio_array[bank]->maska = gpio_bank_saved[bank].maska;
}
AWA_DUMMY_READ(maska);
}
/* Cover L1 memory. One 4M area for code and data each is enough. */
- if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) {
- d_tbl[i_d].addr = L1_DATA_A_START;
- d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB;
+ if (cpu == 0) {
+ if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) {
+ d_tbl[i_d].addr = L1_DATA_A_START;
+ d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB;
+ }
+ i_tbl[i_i].addr = L1_CODE_START;
+ i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB;
}
- i_tbl[i_i].addr = L1_CODE_START;
- i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB;
-
+#ifdef CONFIG_SMP
+ else {
+ if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) {
+ d_tbl[i_d].addr = COREB_L1_DATA_A_START;
+ d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB;
+ }
+ i_tbl[i_i].addr = COREB_L1_CODE_START;
+ i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB;
+ }
+#endif
first_switched_dcplb = i_d;
first_switched_icplb = i_i;
int in_mem_const(unsigned long addr, unsigned long size,
unsigned long const_addr, unsigned long const_size)
{
- return in_mem_const_off(addr, 0, size, const_addr, const_size);
+ return in_mem_const_off(addr, size, 0, const_addr, const_size);
}
#define IN_ASYNC(bnum, bctlnum) \
({ \
if (in_mem_const(addr, size, L1_DATA_B_START, L1_DATA_B_LENGTH))
return cpu == 0 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
#ifdef COREB_L1_CODE_START
- if (in_mem_const(addr, size, COREB_L1_CODE_START, L1_CODE_LENGTH))
+ if (in_mem_const(addr, size, COREB_L1_CODE_START, COREB_L1_CODE_LENGTH))
return cpu == 1 ? BFIN_MEM_ACCESS_ITEST : BFIN_MEM_ACCESS_IDMA;
if (in_mem_const(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH))
return cpu == 1 ? BFIN_MEM_ACCESS_CORE_ONLY : -EFAULT;
- if (in_mem_const(addr, size, COREB_L1_DATA_A_START, L1_DATA_A_LENGTH))
+ if (in_mem_const(addr, size, COREB_L1_DATA_A_START, COREB_L1_DATA_A_LENGTH))
return cpu == 1 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
- if (in_mem_const(addr, size, COREB_L1_DATA_B_START, L1_DATA_B_LENGTH))
+ if (in_mem_const(addr, size, COREB_L1_DATA_B_START, COREB_L1_DATA_B_LENGTH))
return cpu == 1 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
#endif
if (in_mem_const(addr, size, L2_START, L2_LENGTH))
if (in_mem_const_off(addr, size, _ebss_b_l1 - _sdata_b_l1, L1_DATA_B_START, L1_DATA_B_LENGTH))
return 1;
#ifdef COREB_L1_CODE_START
- if (in_mem_const(addr, size, COREB_L1_CODE_START, L1_CODE_LENGTH))
+ if (in_mem_const(addr, size, COREB_L1_CODE_START, COREB_L1_CODE_LENGTH))
return 1;
if (in_mem_const(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH))
return 1;
- if (in_mem_const(addr, size, COREB_L1_DATA_A_START, L1_DATA_A_LENGTH))
+ if (in_mem_const(addr, size, COREB_L1_DATA_A_START, COREB_L1_DATA_A_LENGTH))
return 1;
- if (in_mem_const(addr, size, COREB_L1_DATA_B_START, L1_DATA_B_LENGTH))
+ if (in_mem_const(addr, size, COREB_L1_DATA_B_START, COREB_L1_DATA_B_LENGTH))
return 1;
#endif
if (in_mem_const_off(addr, size, _ebss_l2 - _stext_l2, L2_START, L2_LENGTH))
struct blackfin_cpudata *cpudata = &per_cpu(cpu_data, cpu);
cpudata->idle = current;
- cpudata->loops_per_jiffy = loops_per_jiffy;
cpudata->imemctl = bfin_read_IMEM_CONTROL();
cpudata->dmemctl = bfin_read_DMEM_CONTROL();
}
# endif /* ANOMALY_05000263 */
# endif /* CONFIG_ROMFS_FS */
- memory_end -= mtd_size;
-
- if (mtd_size == 0) {
- console_init();
- panic("Don't boot kernel without rootfs attached.");
+ /* Since the default MTD_UCLINUX has no magic number, we just blindly
+ * read 8 past the end of the kernel's image, and look at it.
+ * When no image is attached, mtd_size is set to a random number
+ * Do some basic sanity checks before operating on things
+ */
+ if (mtd_size == 0 || memory_end <= mtd_size) {
+ pr_emerg("Could not find valid ram mtd attached.\n");
+ } else {
+ memory_end -= mtd_size;
+
+ /* Relocate MTD image to the top of memory after the uncached memory area */
+ uclinux_ram_map.phys = memory_mtd_start = memory_end;
+ uclinux_ram_map.size = mtd_size;
+ pr_info("Found mtd parition at 0x%p, (len=0x%lx), moving to 0x%p\n",
+ _end, mtd_size, (void *)memory_mtd_start);
+ dma_memcpy((void *)uclinux_ram_map.phys, _end, uclinux_ram_map.size);
}
-
- /* Relocate MTD image to the top of memory after the uncached memory area */
- uclinux_ram_map.phys = memory_mtd_start = memory_end;
- uclinux_ram_map.size = mtd_size;
- dma_memcpy((void *)uclinux_ram_map.phys, _end, uclinux_ram_map.size);
#endif /* CONFIG_MTD_UCLINUX */
#if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263)
else
printk(KERN_CONT "and Disabled\n");
-#if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH)
- /* we need to initialize the Flashrom device here since we might
- * do things with flash early on in the boot
- */
- flash_probe();
-#endif
-
printk(KERN_INFO "Boot Mode: %i\n", bfin_read_SYSCR() & 0xF);
/* Newer parts mirror SWRST bits in SYSCR */
CPU, bfin_revid());
}
- /* We can't run on BF548-0.1 due to ANOMALY 05000448 */
- if (bfin_cpuid() == 0x27de && bfin_revid() == 1)
- panic("You can't run on this processor due to 05000448");
-
printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
sclk/1000000, sclk%1000000);
seq_printf(m, "bogomips\t: %lu.%02lu\n"
"Calibration\t: %lu loops\n",
- (cpudata->loops_per_jiffy * HZ) / 500000,
- ((cpudata->loops_per_jiffy * HZ) / 5000) % 100,
- (cpudata->loops_per_jiffy * HZ));
+ (loops_per_jiffy * HZ) / 500000,
+ ((loops_per_jiffy * HZ) / 5000) % 100,
+ (loops_per_jiffy * HZ));
/* Check Cache configutation */
switch (cpudata->dmemctl & (1 << DMC0_P | 1 << DMC1_P)) {
if (kernel_mode_regs(fp) || (current && !current->mm)) {
console_verbose();
oops_in_progress = 1;
- if (strerror)
- verbose_printk(strerror);
}
if (sig != SIGTRAP) {
+ if (strerror)
+ verbose_printk(strerror);
+
dump_bfin_process(fp);
dump_bfin_mem(fp);
show_regs(fp);
force_sig_info(sig, &info, current);
}
- if (ANOMALY_05000461 && trapnr == VEC_HWERR && !access_ok(VERIFY_READ, fp->pc, 8))
+ if ((ANOMALY_05000461 && trapnr == VEC_HWERR && !access_ok(VERIFY_READ, fp->pc, 8)) ||
+ (ANOMALY_05000281 && trapnr == VEC_HWERR) ||
+ (ANOMALY_05000189 && (trapnr == VEC_CPLB_I_VL || trapnr == VEC_CPLB_VL)))
fp->pc = SAFE_USER_INSTRUCTION;
traps_done:
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#define BITS_PER_UNIT 8
-
-typedef int SItype __attribute__ ((mode(SI)));
-typedef unsigned int USItype __attribute__ ((mode(SI)));
-typedef int DItype __attribute__ ((mode(DI)));
-typedef int word_type __attribute__ ((mode(__word__)));
-
-struct DIstruct {
- SItype high, low;
-};
-
-typedef union {
- struct DIstruct s;
- DItype ll;
-} DIunion;
+#include "gcclib.h"
#ifdef CONFIG_ARITHMETIC_OPS_L1
DItype __lshrdi3(DItype u, word_type b)__attribute__((l1_text));
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},
#define ANOMALY_05000179 (0)
#define ANOMALY_05000182 (0)
#define ANOMALY_05000183 (0)
+#define ANOMALY_05000189 (0)
#define ANOMALY_05000198 (0)
#define ANOMALY_05000202 (0)
#define ANOMALY_05000215 (0)
#define ANOMALY_05000357 (0)
#define ANOMALY_05000362 (1)
#define ANOMALY_05000363 (0)
+#define ANOMALY_05000364 (0)
#define ANOMALY_05000371 (0)
#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (0)
#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
.type = "pcf8574_lcd",
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},
#define ANOMALY_05000443 (1)
/* The WURESET Bit in the SYSCR Register is not Functional */
#define ANOMALY_05000445 (1)
+/* USB DMA Short Packet Data Corruption */
+#define ANOMALY_05000450 (1)
/* BCODE_QUICKBOOT, BCODE_ALLBOOT, and BCODE_FULLBOOT Settings in SYSCR Register Not Functional */
#define ANOMALY_05000451 (1)
/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */
#define ANOMALY_05000179 (0)
#define ANOMALY_05000182 (0)
#define ANOMALY_05000183 (0)
+#define ANOMALY_05000189 (0)
#define ANOMALY_05000198 (0)
#define ANOMALY_05000202 (0)
#define ANOMALY_05000215 (0)
#define ANOMALY_05000412 (0)
#define ANOMALY_05000447 (0)
#define ANOMALY_05000448 (0)
-#define ANOMALY_05000450 (0)
#endif
#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
.irq = 39,
},
#endif
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},
#define ANOMALY_05000323 (0)
#define ANOMALY_05000353 (1)
#define ANOMALY_05000362 (1)
+#define ANOMALY_05000364 (0)
#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (1)
#define ANOMALY_05000389 (0)
#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
#if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
{
I2C_BOARD_INFO("ad7142_joystick", 0x2C),
- .irq = IRQ_PF5,
+ .irq = IRQ_PG5,
},
#endif
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},
#define ANOMALY_05000179 (0)
#define ANOMALY_05000182 (0)
#define ANOMALY_05000183 (0)
+#define ANOMALY_05000189 (0)
#define ANOMALY_05000198 (0)
#define ANOMALY_05000202 (0)
#define ANOMALY_05000215 (0)
#define ANOMALY_05000353 (1)
#define ANOMALY_05000362 (1)
#define ANOMALY_05000363 (0)
+#define ANOMALY_05000364 (0)
#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (1)
#define ANOMALY_05000389 (0)
#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
#define ANOMALY_05000158 (0)
#define ANOMALY_05000171 (0)
#define ANOMALY_05000182 (0)
+#define ANOMALY_05000189 (0)
#define ANOMALY_05000198 (0)
#define ANOMALY_05000202 (0)
#define ANOMALY_05000215 (0)
#define ANOMALY_05000353 (1)
#define ANOMALY_05000362 (1)
#define ANOMALY_05000363 (0)
+#define ANOMALY_05000364 (0)
#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (1)
#define ANOMALY_05000389 (0)
#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
#if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */
static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},
#define ANOMALY_05000179 (0)
#define ANOMALY_05000182 (0)
#define ANOMALY_05000183 (0)
+#define ANOMALY_05000189 (0)
#define ANOMALY_05000198 (0)
#define ANOMALY_05000202 (0)
#define ANOMALY_05000215 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000362 (1)
#define ANOMALY_05000363 (0)
+#define ANOMALY_05000364 (0)
#define ANOMALY_05000380 (0)
#define ANOMALY_05000400 (0)
#define ANOMALY_05000412 (0)
#define ANOMALY_05000273 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000353 (1)
+#define ANOMALY_05000364 (0)
#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (1)
#define ANOMALY_05000389 (0)
#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
/* Memory Map for ADSP-BF561 processors */
-#ifdef CONFIG_BF561
#define COREA_L1_CODE_START 0xFFA00000
#define COREA_L1_DATA_A_START 0xFF800000
#define COREA_L1_DATA_B_START 0xFF900000
#define BFIN_DCACHESIZE (0*1024)
#define BFIN_DSUPBANKS 0
#endif /*CONFIG_BFIN_DCACHE*/
+
+/*
+ * If we are in SMP mode, then the cache settings of Core B will match
+ * the settings of Core A. If we aren't, then we assume Core B is not
+ * using any cache. This allows the rest of the kernel to work with
+ * the core in either mode as we are only loading user code into it and
+ * it is the user's problem to make sure they aren't doing something
+ * stupid there.
+ *
+ * Note that we treat the L1 code region as a contiguous blob to make
+ * the rest of the kernel simpler. Easier to check one region than a
+ * bunch of small ones. Again, possible misbehavior here is the fault
+ * of the user -- don't try to use memory that doesn't exist.
+ */
+#ifdef CONFIG_SMP
+# define COREB_L1_CODE_LENGTH L1_CODE_LENGTH
+# define COREB_L1_DATA_A_LENGTH L1_DATA_A_LENGTH
+# define COREB_L1_DATA_B_LENGTH L1_DATA_B_LENGTH
+#else
+# define COREB_L1_CODE_LENGTH 0x14000
+# define COREB_L1_DATA_A_LENGTH 0x8000
+# define COREB_L1_DATA_B_LENGTH 0x8000
#endif
/* Level 2 Memory */
/* Single stepping only a single instruction, so clear the trace
* bit here. */
r7 = syscfg;
- bitclr (r7, 0);
+ bitclr (r7, SYSCFG_SSSTEP_P);
syscfg = R7;
jump _ex_trap_c;
if !cc jump _bfin_return_from_exception;
r7 = syscfg;
- bitclr (r7, 0);
+ bitclr (r7, SYSCFG_SSSTEP_P); /* Turn off single step */
syscfg = R7;
/* Fall through to _bfin_return_from_exception. */
r6 = retx;
[p5 + PDA_RETX] = r6;
#endif
+ /* Save the state of single stepping */
r6 = SYSCFG;
[p5 + PDA_SYSCFG] = r6;
- BITCLR(r6, 0);
+ /* Clear it while we handle the exception in IRQ5 mode */
+ BITCLR(r6, SYSCFG_SSSTEP_P);
SYSCFG = r6;
/* Disable all interrupts, but make sure level 5 is enabled so
* exception. This is a unrecoverable event, so crash.
* Note: this cannot be ENTRY() as we jump here with "if cc jump" ...
*/
-_double_fault:
+ENTRY(_double_fault)
/* Turn caches & protection off, to ensure we don't get any more
* double exceptions
*/
raise 15; /* raise evt15 to do signal or reschedule */
4:
r0 = syscfg;
- bitclr(r0, 0);
+ bitclr(r0, SYSCFG_SSSTEP_P); /* Turn off single step */
syscfg = r0;
5:
rts;
return 0;
msg = kmalloc(sizeof(*msg), GFP_ATOMIC);
+ if (!msg)
+ return -ENOMEM;
INIT_LIST_HEAD(&msg->list);
msg->call_struct.func = func;
msg->call_struct.info = info;
cpu_set(cpu, callmap);
msg = kmalloc(sizeof(*msg), GFP_ATOMIC);
+ if (!msg)
+ return -ENOMEM;
INIT_LIST_HEAD(&msg->list);
msg->call_struct.func = func;
msg->call_struct.info = info;
return;
msg = kmalloc(sizeof(*msg), GFP_ATOMIC);
+ if (!msg)
+ return;
memset(msg, 0, sizeof(msg));
INIT_LIST_HEAD(&msg->list);
msg->type = BFIN_IPI_RESCHEDULE;
return;
msg = kmalloc(sizeof(*msg), GFP_ATOMIC);
+ if (!msg)
+ return;
memset(msg, 0, sizeof(msg));
INIT_LIST_HEAD(&msg->list);
msg->type = BFIN_IPI_CPU_STOP;
unsigned int cpu;
for_each_online_cpu(cpu)
- bogosum += per_cpu(cpu_data, cpu).loops_per_jiffy;
+ bogosum += loops_per_jiffy;
printk(KERN_INFO "SMP: Total of %d processors activated "
"(%lu.%02lu BogoMIPS).\n",
__free_page(pte);
}
-#define __pte_free_tlb(tlb,pte) \
+#define __pte_free_tlb(tlb,pte,address) \
do { \
pgtable_page_dtor(pte); \
tlb_remove_page((tlb), pte); \
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/user.h>
+#include <linux/tracehook.h>
#include <asm/uaccess.h>
#include <asm/page.h>
/* deal with pending signal delivery */
if (thread_info_flags & _TIF_SIGPENDING)
do_signal(canrestart,regs);
+
+ if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+ clear_thread_flag(TIF_NOTIFY_RESUME);
+ tracehook_notify_resume(regs);
+ if (current->replacement_session_keyring)
+ key_replace_session_keyring();
+ }
}
__free_page(pte);
}
-#define __pte_free_tlb(tlb,pte) \
+#define __pte_free_tlb(tlb,pte,address) \
do { \
pgtable_page_dtor(pte); \
tlb_remove_page((tlb),(pte)); \
*/
#define pmd_alloc_one(mm, addr) ({ BUG(); ((pmd_t *) 2); })
#define pmd_free(mm, x) do { } while (0)
-#define __pmd_free_tlb(tlb,x) do { } while (0)
+#define __pmd_free_tlb(tlb,x,a) do { } while (0)
#endif /* CONFIG_MMU */
*/
#define pud_alloc_one(mm, address) NULL
#define pud_free(mm, x) do { } while (0)
-#define __pud_free_tlb(tlb, x) do { } while (0)
+#define __pud_free_tlb(tlb, x, address) do { } while (0)
/*
* The "pud_xxx()" functions here are trivial for a folded two-level
if (thread_info_flags & _TIF_NOTIFY_RESUME) {
clear_thread_flag(TIF_NOTIFY_RESUME);
tracehook_notify_resume(__frame);
+ if (current->replacement_session_keyring)
+ key_replace_session_keyring();
}
} /* end do_notify_resume() */
TIF_NEED_RESCHED */
#define TIF_MEMDIE 4
#define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */
+#define TIF_NOTIFY_RESUME 6 /* callback before returning to user */
#define TIF_FREEZE 16 /* is freezing for suspend */
/* as above, but as bit values */
#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
+#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
#define _TIF_FREEZE (1<<TIF_FREEZE)
#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */
#include <linux/tty.h>
#include <linux/binfmts.h>
#include <linux/freezer.h>
+#include <linux/tracehook.h>
#include <asm/setup.h>
#include <asm/uaccess.h>
{
if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
do_signal(regs, NULL);
+
+ if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+ clear_thread_flag(TIF_NOTIFY_RESUME);
+ tracehook_notify_resume(regs);
+ if (current->replacement_session_keyring)
+ key_replace_session_keyring();
+ }
}
ftp://ftp.hpl.hp.com/pub/linux-ia64/gas-030124.tar.gz)
endif
-ifeq ($(call cc-version),0304)
- cflags-$(CONFIG_ITANIUM) += -mtune=merced
- cflags-$(CONFIG_MCKINLEY) += -mtune=mckinley
-endif
-
KBUILD_CFLAGS += $(cflags-y)
head-y := arch/ia64/kernel/head.o arch/ia64/kernel/init_task.o
{
__u32 *p = (__u32 *) addr + (nr >> 5);
__u32 m = 1 << (nr & 31);
- int oldbitset = *p & m;
+ int oldbitset = (*p & m) != 0;
*p &= ~m;
return oldbitset;
#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
#define get_dma_ops(dev) platform_dma_get_ops(dev)
-#define flush_write_buffers()
#include <asm-generic/dma-mapping-common.h>
return 0;
}
+static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
+{
+ if (!dev->dma_mask)
+ return 0;
+
+ return addr + size <= *dev->dma_mask;
+}
+
+static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+ return paddr;
+}
+
+static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
+{
+ return daddr;
+}
+
extern int dma_get_cache_alignment(void);
static inline void
* David Mosberger-Tang <davidm@hpl.hp.com>
*/
+#include <linux/types.h>
+
/* floating point status register: */
#define FPSR_TRAP_VD (1 << 0) /* invalid op trap disabled */
#define FPSR_TRAP_DD (1 << 1) /* denormal trap disabled */
{
quicklist_free(0, NULL, pud);
}
-#define __pud_free_tlb(tlb, pud) pud_free((tlb)->mm, pud)
+#define __pud_free_tlb(tlb, pud, address) pud_free((tlb)->mm, pud)
#endif /* CONFIG_PGTABLE_4 */
static inline void
quicklist_free(0, NULL, pmd);
}
-#define __pmd_free_tlb(tlb, pmd) pmd_free((tlb)->mm, pmd)
+#define __pmd_free_tlb(tlb, pmd, address) pmd_free((tlb)->mm, pmd)
static inline void
pmd_populate(struct mm_struct *mm, pmd_t * pmd_entry, pgtable_t pte)
quicklist_trim(0, NULL, 25, 16);
}
-#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, pte)
+#define __pte_free_tlb(tlb, pte, address) pte_free((tlb)->mm, pte)
#endif /* _ASM_IA64_PGALLOC_H */
#include <linux/bitops.h>
#include <asm/cacheflush.h>
#include <asm/mmu_context.h>
-#include <asm/processor.h>
/*
* Next come the mappings that determine how mmap() protection bits
__tlb_remove_tlb_entry(tlb, ptep, addr); \
} while (0)
-#define pte_free_tlb(tlb, ptep) \
+#define pte_free_tlb(tlb, ptep, address) \
do { \
tlb->need_flush = 1; \
- __pte_free_tlb(tlb, ptep); \
+ __pte_free_tlb(tlb, ptep, address); \
} while (0)
-#define pmd_free_tlb(tlb, ptep) \
+#define pmd_free_tlb(tlb, ptep, address) \
do { \
tlb->need_flush = 1; \
- __pmd_free_tlb(tlb, ptep); \
+ __pmd_free_tlb(tlb, ptep, address); \
} while (0)
-#define pud_free_tlb(tlb, pudp) \
+#define pud_free_tlb(tlb, pudp, address) \
do { \
tlb->need_flush = 1; \
- __pud_free_tlb(tlb, pudp); \
+ __pud_free_tlb(tlb, pudp, address); \
} while (0)
#endif /* _ASM_IA64_TLB_H */
#ifndef _ASM_IA64_XEN_HYPERVISOR_H
#define _ASM_IA64_XEN_HYPERVISOR_H
+#include <linux/err.h>
#include <xen/interface/xen.h>
#include <xen/interface/version.h> /* to compile feature.c */
#include <xen/features.h> /* to comiple xen-netfront.c */
struct dma_map_ops *dma_ops;
EXPORT_SYMBOL(dma_ops);
+#define PREALLOC_DMA_DEBUG_ENTRIES (1 << 16)
+
+static int __init dma_init(void)
+{
+ dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
+
+ return 0;
+}
+fs_initcall(dma_init);
+
struct dma_map_ops *dma_get_ops(struct device *dev)
{
return dma_ops;
#include <asm/page.h>
EXPORT_SYMBOL(clear_page);
+EXPORT_SYMBOL(copy_page);
#ifdef CONFIG_VIRTUAL_MEM_MAP
#include <linux/bootmem.h>
EXPORT_SYMBOL(__moddi3);
EXPORT_SYMBOL(__umoddi3);
-#include <asm/page.h>
-EXPORT_SYMBOL(copy_page);
-
#if defined(CONFIG_MD_RAID456) || defined(CONFIG_MD_RAID456_MODULE)
extern void xor_ia64_2(void);
extern void xor_ia64_3(void);
}
addr = ioremap(phys_addr, 0);
+ if (addr == NULL) {
+ spin_unlock_irqrestore(&iosapic_lock, flags);
+ return -ENOMEM;
+ }
ver = iosapic_version(addr);
if ((err = iosapic_check_gsi_range(gsi_base, ver))) {
iounmap(addr);
int iommu_dma_supported(struct device *dev, u64 mask)
{
- struct dma_map_ops *ops = platform_dma_get_ops(dev);
-
- if (ops->dma_supported)
- return ops->dma_supported(dev, mask);
-
/* Copied from i386. Doesn't make much sense, because it will
only work for pci_alloc_coherent.
The caller just has to use GFP_DMA in this case. */
if (test_thread_flag(TIF_NOTIFY_RESUME)) {
clear_thread_flag(TIF_NOTIFY_RESUME);
tracehook_notify_resume(&scr->pt);
+ if (current->replacement_session_keyring)
+ key_replace_session_keyring();
}
/* copy user rbs to kernel rbs */
retval = kobject_init_and_add(&all_cpu_cache_info[cpu].kobj,
&cache_ktype_percpu_entry, &sys_dev->kobj,
"%s", "cache");
+ if (unlikely(retval < 0)) {
+ cpu_cache_sysfs_exit(cpu);
+ return retval;
+ }
for (i = 0; i < all_cpu_cache_info[cpu].num_cache_leaves; i++) {
this_object = LEAF_KOBJECT_PTR(cpu,i);
}
kobject_put(&all_cpu_cache_info[cpu].kobj);
cpu_cache_sysfs_exit(cpu);
- break;
+ return retval;
}
kobject_uevent(&(this_object->kobj), KOBJ_ADD);
}
vcpu_get_fpreg(vcpu, inst.M9.f2, &v);
/* Write high word. FIXME: this is a kludge! */
v.u.bits[1] &= 0x3ffff;
- mmio_access(vcpu, padr + 8, &v.u.bits[1], 8, ma, IOREQ_WRITE);
+ mmio_access(vcpu, padr + 8, (u64 *)&v.u.bits[1], 8,
+ ma, IOREQ_WRITE);
data = v.u.bits[0];
size = 3;
} else if (inst.M10.major == 7 && inst.M10.x6 == 0x3B) {
/* Write high word.FIXME: this is a kludge! */
v.u.bits[1] &= 0x3ffff;
- mmio_access(vcpu, padr + 8, &v.u.bits[1], 8, ma, IOREQ_WRITE);
+ mmio_access(vcpu, padr + 8, (u64 *)&v.u.bits[1],
+ 8, ma, IOREQ_WRITE);
data = v.u.bits[0];
size = 3;
} else if (inst.M10.major == 7 && inst.M10.x6 == 0x31) {
u64 vcpu_get_gr(struct kvm_vcpu *vcpu, unsigned long reg)
{
struct kvm_pt_regs *regs = vcpu_regs(vcpu);
- u64 val;
+ unsigned long val;
if (!reg)
return 0;
return val;
}
-void vcpu_set_gr(struct kvm_vcpu *vcpu, u64 reg, u64 value, int nat)
+void vcpu_set_gr(struct kvm_vcpu *vcpu, unsigned long reg, u64 value, int nat)
{
struct kvm_pt_regs *regs = vcpu_regs(vcpu);
long sof = (regs->cr_ifs) & 0x7f;
vcpu_set_gr(vcpu, inst.M46.r1, tag, 0);
}
-int vcpu_tpa(struct kvm_vcpu *vcpu, u64 vadr, u64 *padr)
+int vcpu_tpa(struct kvm_vcpu *vcpu, u64 vadr, unsigned long *padr)
{
struct thash_data *data;
union ia64_isr visr, pt_isr;
return highest_bits((int *)&(VMX(vcpu, insvc[0])));
}
-extern void vcpu_get_fpreg(struct kvm_vcpu *vcpu, u64 reg,
+extern void vcpu_get_fpreg(struct kvm_vcpu *vcpu, unsigned long reg,
struct ia64_fpreg *val);
-extern void vcpu_set_fpreg(struct kvm_vcpu *vcpu, u64 reg,
+extern void vcpu_set_fpreg(struct kvm_vcpu *vcpu, unsigned long reg,
struct ia64_fpreg *val);
-extern u64 vcpu_get_gr(struct kvm_vcpu *vcpu, u64 reg);
-extern void vcpu_set_gr(struct kvm_vcpu *vcpu, u64 reg, u64 val, int nat);
-extern u64 vcpu_get_psr(struct kvm_vcpu *vcpu);
-extern void vcpu_set_psr(struct kvm_vcpu *vcpu, u64 val);
+extern u64 vcpu_get_gr(struct kvm_vcpu *vcpu, unsigned long reg);
+extern void vcpu_set_gr(struct kvm_vcpu *vcpu, unsigned long reg,
+ u64 val, int nat);
+extern unsigned long vcpu_get_psr(struct kvm_vcpu *vcpu);
+extern void vcpu_set_psr(struct kvm_vcpu *vcpu, unsigned long val);
extern u64 vcpu_thash(struct kvm_vcpu *vcpu, u64 vadr);
extern void vcpu_bsw0(struct kvm_vcpu *vcpu);
extern void thash_vhpt_insert(struct kvm_vcpu *v, u64 pte,
GLOBAL_ENTRY(csum_ipv6_magic)
ld4 r20=[in0],4
ld4 r21=[in1],4
- dep r15=in3,in2,32,16
+ zxt4 in2=in2
;;
ld4 r22=[in0],4
ld4 r23=[in1],4
- mux1 r15=r15,@rev
+ dep r15=in3,in2,32,16
;;
ld4 r24=[in0],4
ld4 r25=[in1],4
- shr.u r15=r15,16
+ mux1 r15=r15,@rev
add r16=r20,r21
add r17=r22,r23
+ zxt4 in4=in4
;;
ld4 r26=[in0],4
ld4 r27=[in1],4
+ shr.u r15=r15,16
add r18=r24,r25
add r8=r16,r17
;;
account_idle_ticks(blocked);
run_local_timers();
- if (rcu_pending(cpu))
- rcu_check_callbacks(cpu, user_mode(get_irq_regs()));
+ rcu_check_callbacks(cpu, user_mode(get_irq_regs()));
scheduler_tick();
run_posix_cpu_timers(p);
__free_page(pte);
}
-#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, (pte))
+#define __pte_free_tlb(tlb, pte, addr) pte_free((tlb)->mm, (pte))
/*
* allocating and freeing a pmd is trivial: the 1-entry pmd is
#define pmd_alloc_one(mm, addr) ({ BUG(); ((pmd_t *)2); })
#define pmd_free(mm, x) do { } while (0)
-#define __pmd_free_tlb(tlb, x) do { } while (0)
+#define __pmd_free_tlb(tlb, x, addr) do { } while (0)
#define pgd_populate(mm, pmd, pte) BUG()
#define check_pgt_cache() do { } while (0)
#define TIF_NEED_RESCHED 2 /* rescheduling necessary */
#define TIF_SINGLESTEP 3 /* restore singlestep on return to user mode */
#define TIF_IRET 4 /* return with iret */
+#define TIF_NOTIFY_RESUME 5 /* callback before returning to user */
#define TIF_RESTORE_SIGMASK 8 /* restore signal mask in do_signal() */
#define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */
#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */
#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
#define _TIF_SINGLESTEP (1<<TIF_SINGLESTEP)
#define _TIF_IRET (1<<TIF_IRET)
+#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME)
#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
#define _TIF_USEDFPU (1<<TIF_USEDFPU)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#include <linux/stddef.h>
#include <linux/personality.h>
#include <linux/freezer.h>
+#include <linux/tracehook.h>
#include <asm/cacheflush.h>
#include <asm/ucontext.h>
#include <asm/uaccess.h>
if (thread_info_flags & _TIF_SIGPENDING)
do_signal(regs,oldset);
+ if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+ clear_thread_flag(TIF_NOTIFY_RESUME);
+ tracehook_notify_resume(regs);
+ if (current->replacement_session_keyring)
+ key_replace_session_keyring();
+ }
+
clear_thread_flag(TIF_IRET);
}
tod_2000.cntrl1 = TOD2000_CNTRL1_HOLD;
- while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt--) {
+ while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt) {
tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD;
udelay(70);
tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD;
+ --cnt;
}
if (!cnt)
tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD;
- while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt--) {
+ while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt) {
tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD;
udelay(70);
tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD;
+ --cnt;
}
if (!cnt)
#define curptr a2
LFLUSH_I_AND_D = 0x00000808
-LSIGTRAP = 5
/* process bits for task_struct.ptrace */
PT_TRACESYS_OFF = 3
#define STR(X) STR1(X)
#define STR1(X) #X
-#define PT_OFF_ORIG_D0 0x24
-#define PT_OFF_FORMATVEC 0x32
-#define PT_OFF_SR 0x2C
#define SAVE_ALL_INT \
"clrl %%sp@-;" /* stk_adj */ \
"pea -1:w;" /* orig d0 = -1 */ \
lea %sp@(-32),%sp /* space for 8 regs */
moveml %d1-%d5/%a0-%a2,%sp@
movel sw_usp,%a0 /* get usp */
- movel %a0@-,%sp@(PT_PC) /* copy exception program counter */
- movel %a0@-,%sp@(PT_FORMATVEC)/* copy exception format/vector/sr */
+ movel %a0@-,%sp@(PT_OFF_PC) /* copy exception program counter */
+ movel %a0@-,%sp@(PT_OFF_FORMATVEC)/*copy exception format/vector/sr */
bra 7f
6:
clrl %sp@- /* stkadj */
bnes 8f /* no, skip */
move #0x2700,%sr /* disable intrs */
movel sw_usp,%a0 /* get usp */
- movel %sp@(PT_PC),%a0@- /* copy exception program counter */
- movel %sp@(PT_FORMATVEC),%a0@-/* copy exception format/vector/sr */
+ movel %sp@(PT_OFF_PC),%a0@- /* copy exception program counter */
+ movel %sp@(PT_OFF_FORMATVEC),%a0@-/*copy exception format/vector/sr */
moveml %sp@,%d1-%d5/%a0-%a2
lea %sp@(32),%sp /* space for 8 regs */
movel %sp@+,%d0
* these are only used during instruction decoding
* where we always know how deep we're on the stack.
*/
-#define FPS_DO (PT_D0)
-#define FPS_D1 (PT_D1)
-#define FPS_D2 (PT_D2)
-#define FPS_A0 (PT_A0)
-#define FPS_A1 (PT_A1)
-#define FPS_A2 (PT_A2)
-#define FPS_SR (PT_SR)
-#define FPS_PC (PT_PC)
-#define FPS_EA (PT_PC+6)
-#define FPS_PC2 (PT_PC+10)
+#define FPS_DO (PT_OFF_D0)
+#define FPS_D1 (PT_OFF_D1)
+#define FPS_D2 (PT_OFF_D2)
+#define FPS_A0 (PT_OFF_A0)
+#define FPS_A1 (PT_OFF_A1)
+#define FPS_A2 (PT_OFF_A2)
+#define FPS_SR (PT_OFF_SR)
+#define FPS_PC (PT_OFF_PC)
+#define FPS_EA (PT_OFF_PC+6)
+#define FPS_PC2 (PT_OFF_PC+10)
.macro fp_get_fp_reg
lea (FPD_FPREG,FPDATA,%d0.w*4),%a0
return NULL;
pte = kmap(page);
- if (pte) {
- __flush_page_to_ram(pte);
- flush_tlb_kernel_page(pte);
- nocache_page(pte);
- }
- kunmap(pte);
+ __flush_page_to_ram(pte);
+ flush_tlb_kernel_page(pte);
+ nocache_page(pte);
+ kunmap(page);
pgtable_page_ctor(page);
return page;
}
__free_page(page);
}
-static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t page)
+static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t page,
+ unsigned long address)
{
pgtable_page_dtor(page);
cache_page(kmap(page));
return free_pointer_table(pmd);
}
-static inline int __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
+static inline int __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd,
+ unsigned long address)
{
return free_pointer_table(pmd);
}
#endif
#ifndef __ASSEMBLY__
-#include <asm-generic/pgtable.h>
-
/*
* Macro to mark a page protection value as "uncacheable".
*/
? (__pgprot((pgprot_val(prot) & _CACHEMASK040) | _PAGE_NOCACHE_S)) \
: (prot)))
+#include <asm-generic/pgtable.h>
#endif /* !__ASSEMBLY__ */
/*
__free_page(page);
}
-#define __pte_free_tlb(tlb,pte) \
+#define __pte_free_tlb(tlb,pte,addr) \
do { \
pgtable_page_dtor(pte); \
tlb_remove_page((tlb), pte); \
* inside the pgd, so has no extra memory associated with it.
*/
#define pmd_free(mm, x) do { } while (0)
-#define __pmd_free_tlb(tlb, x) do { } while (0)
+#define __pmd_free_tlb(tlb, x, addr) do { } while (0)
static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
{
#ifndef _ASM_M68K_THREAD_INFO_H
#define _ASM_M68K_THREAD_INFO_H
+#ifndef ASM_OFFSETS_C
+#include <asm/asm-offsets.h>
+#endif
+#include <asm/current.h>
#include <asm/types.h>
#include <asm/page.h>
#define init_thread_info (init_task.thread.info)
#define init_stack (init_thread_union.stack)
-#define task_thread_info(tsk) (&(tsk)->thread.info)
+#ifdef ASM_OFFSETS_C
+#define task_thread_info(tsk) ((struct thread_info *) NULL)
+#else
+#define task_thread_info(tsk) ((struct thread_info *)((char *)tsk+TASK_TINFO))
+#endif
+
#define task_stack_page(tsk) ((tsk)->stack)
#define current_thread_info() task_thread_info(current)
#define __NR_inotify_init1 328
#define __NR_preadv 329
#define __NR_pwritev 330
+#define __NR_rt_tgsigqueueinfo 331
+#define __NR_perf_counter_open 332
#ifdef __KERNEL__
-#define NR_syscalls 331
+#define NR_syscalls 333
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR
* #defines from the assembly-language output.
*/
+#define ASM_OFFSETS_C
+
#include <linux/stddef.h>
#include <linux/sched.h>
#include <linux/kernel_stat.h>
DEFINE(TASK_INFO, offsetof(struct task_struct, thread.info));
DEFINE(TASK_MM, offsetof(struct task_struct, mm));
DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
+#ifdef CONFIG_MMU
+ DEFINE(TASK_TINFO, offsetof(struct task_struct, thread.info));
+#endif
/* offsets into the thread struct */
DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp));
DEFINE(TINFO_FLAGS, offsetof(struct thread_info, flags));
/* offsets into the pt_regs */
- DEFINE(PT_D0, offsetof(struct pt_regs, d0));
- DEFINE(PT_ORIG_D0, offsetof(struct pt_regs, orig_d0));
- DEFINE(PT_D1, offsetof(struct pt_regs, d1));
- DEFINE(PT_D2, offsetof(struct pt_regs, d2));
- DEFINE(PT_D3, offsetof(struct pt_regs, d3));
- DEFINE(PT_D4, offsetof(struct pt_regs, d4));
- DEFINE(PT_D5, offsetof(struct pt_regs, d5));
- DEFINE(PT_A0, offsetof(struct pt_regs, a0));
- DEFINE(PT_A1, offsetof(struct pt_regs, a1));
- DEFINE(PT_A2, offsetof(struct pt_regs, a2));
- DEFINE(PT_PC, offsetof(struct pt_regs, pc));
- DEFINE(PT_SR, offsetof(struct pt_regs, sr));
+ DEFINE(PT_OFF_D0, offsetof(struct pt_regs, d0));
+ DEFINE(PT_OFF_ORIG_D0, offsetof(struct pt_regs, orig_d0));
+ DEFINE(PT_OFF_D1, offsetof(struct pt_regs, d1));
+ DEFINE(PT_OFF_D2, offsetof(struct pt_regs, d2));
+ DEFINE(PT_OFF_D3, offsetof(struct pt_regs, d3));
+ DEFINE(PT_OFF_D4, offsetof(struct pt_regs, d4));
+ DEFINE(PT_OFF_D5, offsetof(struct pt_regs, d5));
+ DEFINE(PT_OFF_A0, offsetof(struct pt_regs, a0));
+ DEFINE(PT_OFF_A1, offsetof(struct pt_regs, a1));
+ DEFINE(PT_OFF_A2, offsetof(struct pt_regs, a2));
+ DEFINE(PT_OFF_PC, offsetof(struct pt_regs, pc));
+ DEFINE(PT_OFF_SR, offsetof(struct pt_regs, sr));
/* bitfields are a bit difficult */
- DEFINE(PT_VECTOR, offsetof(struct pt_regs, pc) + 4);
+ DEFINE(PT_OFF_FORMATVEC, offsetof(struct pt_regs, pc) + 4);
/* offsets into the irq_handler struct */
DEFINE(IRQ_HANDLER, offsetof(struct irq_node, handler));
DEFINE(FONT_DESC_PREF, offsetof(struct font_desc, pref));
/* signal defines */
- DEFINE(SIGSEGV, SIGSEGV);
- DEFINE(SEGV_MAPERR, SEGV_MAPERR);
- DEFINE(SIGTRAP, SIGTRAP);
- DEFINE(TRAP_TRACE, TRAP_TRACE);
+ DEFINE(LSIGSEGV, SIGSEGV);
+ DEFINE(LSEGV_MAPERR, SEGV_MAPERR);
+ DEFINE(LSIGTRAP, SIGTRAP);
+ DEFINE(LTRAP_TRACE, TRAP_TRACE);
/* offsets into the custom struct */
DEFINE(CUSTOMBASE, &amiga_custom);
jra .Lret_from_exception
do_trace_entry:
- movel #-ENOSYS,%sp@(PT_D0) | needed for strace
+ movel #-ENOSYS,%sp@(PT_OFF_D0)| needed for strace
subql #4,%sp
SAVE_SWITCH_STACK
jbsr syscall_trace
RESTORE_SWITCH_STACK
addql #4,%sp
- movel %sp@(PT_ORIG_D0),%d0
+ movel %sp@(PT_OFF_ORIG_D0),%d0
cmpl #NR_syscalls,%d0
jcs syscall
badsys:
- movel #-ENOSYS,%sp@(PT_D0)
+ movel #-ENOSYS,%sp@(PT_OFF_D0)
jra ret_from_syscall
do_trace_exit:
addql #4,%sp
/* on 68040 complete pending writebacks if any */
#ifdef CONFIG_M68040
- bfextu %sp@(PT_VECTOR){#0,#4},%d0
+ bfextu %sp@(PT_OFF_FORMATVEC){#0,#4},%d0
subql #7,%d0 | bus error frame ?
jbne 1f
movel %sp,%sp@-
jcc badsys
syscall:
jbsr @(sys_call_table,%d0:l:4)@(0)
- movel %d0,%sp@(PT_D0) | save the return value
+ movel %d0,%sp@(PT_OFF_D0) | save the return value
ret_from_syscall:
|oriw #0x0700,%sr
movew %curptr@(TASK_INFO+TINFO_FLAGS+2),%d0
1: RESTORE_ALL
syscall_exit_work:
- btst #5,%sp@(PT_SR) | check if returning to kernel
+ btst #5,%sp@(PT_OFF_SR) | check if returning to kernel
bnes 1b | if so, skip resched, signals
lslw #1,%d0
jcs do_trace_exit
ENTRY(ret_from_exception)
.Lret_from_exception:
- btst #5,%sp@(PT_SR) | check if returning to kernel
+ btst #5,%sp@(PT_OFF_SR) | check if returning to kernel
bnes 1f | if so, skip resched, signals
| only allow interrupts when we are really the last one on the
| kernel stack, otherwise stack overflow can occur during
jbra resume_userspace
do_delayed_trace:
- bclr #7,%sp@(PT_SR) | clear trace bit in SR
+ bclr #7,%sp@(PT_OFF_SR) | clear trace bit in SR
pea 1 | send SIGTRAP
movel %curptr,%sp@-
pea LSIGTRAP
GET_CURRENT(%d0)
addqb #1,%curptr@(TASK_INFO+TINFO_PREEMPT+1)
| put exception # in d0
- bfextu %sp@(PT_VECTOR){#4,#10},%d0
+ bfextu %sp@(PT_OFF_FORMATVEC){#4,#10},%d0
subw #VEC_SPUR,%d0
movel %sp,%sp@-
ALIGN
ret_from_last_interrupt:
moveq #(~ALLOWINT>>8)&0xff,%d0
- andb %sp@(PT_SR),%d0
+ andb %sp@(PT_OFF_SR),%d0
jne 2b
/* check if we need to do software interrupts */
GET_CURRENT(%d0)
addqb #1,%curptr@(TASK_INFO+TINFO_PREEMPT+1)
| put exception # in d0
- bfextu %sp@(PT_VECTOR){#4,#10},%d0
+ bfextu %sp@(PT_OFF_FORMATVEC){#4,#10},%d0
user_irqvec_fixup = . + 2
subw #VEC_USER,%d0
.long sys_inotify_init1
.long sys_preadv
.long sys_pwritev /* 330 */
+ .long sys_rt_tgsigqueueinfo
+ .long sys_perf_counter_open
fp_err_ua1:
addq.l #4,%sp
move.l %a0,-(%sp)
- pea SEGV_MAPERR
- pea SIGSEGV
+ pea LSEGV_MAPERR
+ pea LSIGSEGV
jsr fpemu_signal
add.w #12,%sp
jra ret_from_exception
| it does not really belong here, but...
fp_sendtrace060:
move.l (FPS_PC,%sp),-(%sp)
- pea TRAP_TRACE
- pea SIGTRAP
+ pea LTRAP_TRACE
+ pea LSIGTRAP
jsr fpemu_signal
add.w #12,%sp
jra ret_from_exception
.long fp_get_d6, fp_get_d7
fp_get_d0:
- move.l (PT_D0+8,%sp),%d0
+ move.l (PT_OFF_D0+8,%sp),%d0
printf PREGISTER,"{d0->%08x}",1,%d0
rts
fp_get_d1:
- move.l (PT_D1+8,%sp),%d0
+ move.l (PT_OFF_D1+8,%sp),%d0
printf PREGISTER,"{d1->%08x}",1,%d0
rts
fp_get_d2:
- move.l (PT_D2+8,%sp),%d0
+ move.l (PT_OFF_D2+8,%sp),%d0
printf PREGISTER,"{d2->%08x}",1,%d0
rts
fp_put_d0:
printf PREGISTER,"{d0<-%08x}",1,%d0
- move.l %d0,(PT_D0+8,%sp)
+ move.l %d0,(PT_OFF_D0+8,%sp)
rts
fp_put_d1:
printf PREGISTER,"{d1<-%08x}",1,%d0
- move.l %d0,(PT_D1+8,%sp)
+ move.l %d0,(PT_OFF_D1+8,%sp)
rts
fp_put_d2:
printf PREGISTER,"{d2<-%08x}",1,%d0
- move.l %d0,(PT_D2+8,%sp)
+ move.l %d0,(PT_OFF_D2+8,%sp)
rts
fp_put_d3:
printf PREGISTER,"{d3<-%08x}",1,%d0
| move.l %d0,%d3
- move.l %d0,(PT_D3+8,%sp)
+ move.l %d0,(PT_OFF_D3+8,%sp)
rts
fp_put_d4:
printf PREGISTER,"{d4<-%08x}",1,%d0
| move.l %d0,%d4
- move.l %d0,(PT_D4+8,%sp)
+ move.l %d0,(PT_OFF_D4+8,%sp)
rts
fp_put_d5:
printf PREGISTER,"{d5<-%08x}",1,%d0
| move.l %d0,%d5
- move.l %d0,(PT_D5+8,%sp)
+ move.l %d0,(PT_OFF_D5+8,%sp)
rts
fp_put_d6:
.long fp_get_a6, fp_get_a7
fp_get_a0:
- move.l (PT_A0+8,%sp),%a0
+ move.l (PT_OFF_A0+8,%sp),%a0
printf PREGISTER,"{a0->%08x}",1,%a0
rts
fp_get_a1:
- move.l (PT_A1+8,%sp),%a0
+ move.l (PT_OFF_A1+8,%sp),%a0
printf PREGISTER,"{a1->%08x}",1,%a0
rts
fp_get_a2:
- move.l (PT_A2+8,%sp),%a0
+ move.l (PT_OFF_A2+8,%sp),%a0
printf PREGISTER,"{a2->%08x}",1,%a0
rts
fp_put_a0:
printf PREGISTER,"{a0<-%08x}",1,%a0
- move.l %a0,(PT_A0+8,%sp)
+ move.l %a0,(PT_OFF_A0+8,%sp)
rts
fp_put_a1:
printf PREGISTER,"{a1<-%08x}",1,%a0
- move.l %a0,(PT_A1+8,%sp)
+ move.l %a0,(PT_OFF_A1+8,%sp)
rts
fp_put_a2:
printf PREGISTER,"{a2<-%08x}",1,%a0
- move.l %a0,(PT_A2+8,%sp)
+ move.l %a0,(PT_OFF_A2+8,%sp)
rts
fp_put_a3:
.long sys_inotify_init1
.long sys_preadv
.long sys_pwritev /* 330 */
+ .long sys_rt_tgsigqueueinfo
+ .long sys_perf_counter_open
.rept NR_syscalls-(.-sys_call_table)/4
.long sys_ni_syscall
# What CPU vesion are we building for, and crack it open
# as major.minor.rev
-CPU_VER=$(subst ",,$(CONFIG_XILINX_MICROBLAZE0_HW_VER) )
-CPU_MAJOR=$(shell echo $(CPU_VER) | cut -d '.' -f 1)
-CPU_MINOR=$(shell echo $(CPU_VER) | cut -d '.' -f 2)
-CPU_REV=$(shell echo $(CPU_VER) | cut -d '.' -f 3)
+CPU_VER := $(shell echo $(CONFIG_XILINX_MICROBLAZE0_HW_VER))
+CPU_MAJOR := $(shell echo $(CPU_VER) | cut -d '.' -f 1)
+CPU_MINOR := $(shell echo $(CPU_VER) | cut -d '.' -f 2)
+CPU_REV := $(shell echo $(CPU_VER) | cut -d '.' -f 3)
export CPU_VER CPU_MAJOR CPU_MINOR CPU_REV
# Use cpu-related CONFIG_ vars to set compile options.
+# The various CONFIG_XILINX cpu features options are integers 0/1/2...
+# rather than bools y/n
# Work out HW multipler support. This is icky.
# 1. Spartan2 has no HW multiplers.
CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER))
-# The various CONFIG_XILINX cpu features options are integers 0/1/2...
-# rather than bools y/n
-
# r31 holds current when in kernel mode
-CFLAGS_KERNEL += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2)
+KBUILD_KERNEL += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2)
LDFLAGS :=
LDFLAGS_vmlinux :=
-LDFLAGS_BLOB := --format binary --oformat elf32-microblaze
-LIBGCC := $(shell $(CC) $(CFLAGS_KERNEL) -print-libgcc-file-name)
+LIBGCC := $(shell $(CC) $(KBUILD_KERNEL) -print-libgcc-file-name)
-head-y := arch/microblaze/kernel/head.o
-libs-y += arch/microblaze/lib/ $(LIBGCC)
-core-y += arch/microblaze/kernel/ arch/microblaze/mm/ \
- arch/microblaze/platform/
+head-y := arch/microblaze/kernel/head.o
+libs-y += arch/microblaze/lib/
+libs-y += $(LIBGCC)
+core-y += arch/microblaze/kernel/
+core-y += arch/microblaze/mm/
+core-y += arch/microblaze/platform/
-boot := arch/$(ARCH)/boot
+boot := arch/microblaze/boot
# defines filename extension depending memory management type
ifeq ($(CONFIG_MMU),)
-MMUEXT := -nommu
+MMU := -nommu
endif
-export MMUEXT
+
+export MMU
all: linux.bin
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc6
-# Fri May 22 10:02:33 2009
+# Linux kernel version: 2.6.31-rc6
+# Tue Aug 18 11:00:02 2009
#
CONFIG_MICROBLAZE=y
# CONFIG_SWAP is not set
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_CSUM=y
+# CONFIG_PCI is not set
+CONFIG_NO_DMA=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
-# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
+# CONFIG_INITRAMFS_COMPRESSION_NONE is not set
+CONFIG_INITRAMFS_COMPRESSION_GZIP=y
# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
CONFIG_AIO=y
+
+#
+# Performance Counters
+#
CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
# Exectuable file formats
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
#
# Multifunction device drivers
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_SAMPLES is not set
+# CONFIG_KMEMCHECK is not set
CONFIG_EARLY_PRINTK=y
CONFIG_HEART_BEAT=y
CONFIG_DEBUG_BOOTMEM=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc5
-# Mon May 11 09:01:02 2009
+# Linux kernel version: 2.6.31-rc6
+# Tue Aug 18 10:35:30 2009
#
CONFIG_MICROBLAZE=y
# CONFIG_SWAP is not set
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_CSUM=y
# CONFIG_PCI is not set
-# CONFIG_NO_DMA is not set
+CONFIG_NO_DMA=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_AIO=y
+
+#
+# Performance Counters
+#
CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_CMDLINE="console=ttyUL0,115200"
# CONFIG_CMDLINE_FORCE is not set
CONFIG_OF=y
-CONFIG_OF_DEVICE=y
CONFIG_PROC_DEVICETREE=y
+
+#
+# Advanced setup
+#
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_KERNEL_START=0x90000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1
#
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
CONFIG_MISC_DEVICES=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
+# CONFIG_XILINX_HWICAP is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
#
# Multifunction device drivers
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
+CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
/* should be defined in each interrupt controller driver */
extern unsigned int get_irq(struct pt_regs *regs);
-#define ack_bad_irq ack_bad_irq
-void ack_bad_irq(unsigned int irq);
#include <asm-generic/hardirq.h>
#endif /* _ASM_MICROBLAZE_HARDIRQ_H */
#include <asm/byteorder.h>
#include <asm/page.h>
#include <linux/types.h>
-#include <asm/byteorder.h>
#include <linux/mm.h> /* Get struct page {...} */
__free_page(ptepage);
}
-#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, (pte))
+#define __pte_free_tlb(tlb, pte, addr) pte_free((tlb)->mm, (pte))
#define pmd_populate(mm, pmd, pte) (pmd_val(*(pmd)) = page_address(pte))
*/
#define pmd_alloc_one(mm, address) ({ BUG(); ((pmd_t *)2); })
/*#define pmd_free(mm, x) do { } while (0)*/
-#define __pmd_free_tlb(tlb, x) do { } while (0)
+#define __pmd_free_tlb(tlb, x, addr) do { } while (0)
#define pgd_populate(mm, pmd, pte) BUG()
extern int do_check_pgt_cache(int, int);
/* Definitions for MicroBlaze. */
#define _PAGE_GUARDED 0x001 /* G: page is guarded from prefetch */
+#define _PAGE_FILE 0x001 /* when !present: nonlinear file mapping */
#define _PAGE_PRESENT 0x002 /* software: PTE contains a translation */
#define _PAGE_NO_CACHE 0x004 /* I: caching is inhibited */
#define _PAGE_WRITETHRU 0x008 /* W: caching is write-through */
static inline int pte_exec(pte_t pte) { return pte_val(pte) & _PAGE_EXEC; }
static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
-/* FIXME */
-static inline int pte_file(pte_t pte) { return 0; }
+static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; }
static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; }
static inline void pte_cache(pte_t pte) { pte_val(pte) &= ~_PAGE_NO_CACHE; }
/* Encode and decode a nonlinear file mapping entry */
#define PTE_FILE_MAX_BITS 29
#define pte_to_pgoff(pte) (pte_val(pte) >> 3)
-#define pgoff_to_pte(off) ((pte_t) { ((off) << 3) })
+#define pgoff_to_pte(off) ((pte_t) { ((off) << 3) | _PAGE_FILE })
extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
#define _ASM_MICROBLAZE_PROM_H
#ifdef __KERNEL__
+/* Definitions used by the flattened device tree */
+#define OF_DT_HEADER 0xd00dfeed /* marker */
+#define OF_DT_BEGIN_NODE 0x1 /* Start of node, full name */
+#define OF_DT_END_NODE 0x2 /* End node */
+#define OF_DT_PROP 0x3 /* Property: name off, size, content */
+#define OF_DT_NOP 0x4 /* nop */
+#define OF_DT_END 0x9
+
+#define OF_DT_VERSION 0x10
+
+#ifndef __ASSEMBLY__
+
#include <linux/types.h>
#include <linux/proc_fs.h>
#include <linux/platform_device.h>
#define of_prop_cmp(s1, s2) strcmp((s1), (s2))
#define of_node_cmp(s1, s2) strcasecmp((s1), (s2))
-/* Definitions used by the flattened device tree */
-#define OF_DT_HEADER 0xd00dfeed /* marker */
-#define OF_DT_BEGIN_NODE 0x1 /* Start of node, full name */
-#define OF_DT_END_NODE 0x2 /* End node */
-#define OF_DT_PROP 0x3 /* Property: name off, size, content */
-#define OF_DT_NOP 0x4 /* nop */
-#define OF_DT_END 0x9
-
-#define OF_DT_VERSION 0x10
-
/*
* This is what gets passed to the kernel by prom_init or kexec
*
*/
#include <linux/of.h>
+#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* _ASM_MICROBLAZE_PROM_H */
#ifndef _ASM_MICROBLAZE_TLB_H
#define _ASM_MICROBLAZE_TLB_H
-#define tlb_flush(tlb) do {} while (0)
+#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
#include <asm-generic/tlb.h>
#define __put_user(x, ptr) \
({ \
- __typeof__(*(ptr)) __gu_val = x; \
+ __typeof__(*(ptr)) volatile __gu_val = (x); \
long __gu_err = 0; \
switch (sizeof(__gu_val)) { \
case 1: \
obj-$(CONFIG_MODULES) += microblaze_ksyms.o module.o
obj-$(CONFIG_MMU) += misc.o
-obj-y += entry$(MMUEXT).o
+obj-y += entry$(MMU).o
#define CI(c, p) { ci->c = PVR_##p(pvr); }
#define err_printk(x) \
- early_printk("ERROR: Microblaze " x " - different for PVR and DTS\n");
+ early_printk("ERROR: Microblaze " x "-different for PVR and DTS\n");
void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu)
{
static const char cpu_ver_string[] = CONFIG_XILINX_MICROBLAZE0_HW_VER;
#define err_printk(x) \
- early_printk("ERROR: Microblaze " x "- different for kernel and DTS\n");
+ early_printk("ERROR: Microblaze " x "-different for kernel and DTS\n");
void __init set_cpuinfo_static(struct cpuinfo *ci, struct device_node *cpu)
{
{"7.10.b", 0x09},
{"7.10.c", 0x0a},
{"7.10.d", 0x0b},
+ {"7.20.a", 0x0c},
+ {"7.20.b", 0x0d},
/* FIXME There is no keycode defined in MBV for these versions */
{"2.10.a", 0x10},
{"3.00.a", 0x20},
#include <linux/linkage.h>
#include <asm/thread_info.h>
#include <asm/page.h>
+#include <asm/prom.h> /* for OF_DT_HEADER */
#ifdef CONFIG_MMU
#include <asm/setup.h> /* COMMAND_LINE_SIZE */
andi r1, r1, ~2
mts rmsr, r1
-/* save fdt to kernel location */
-/* r7 stores pointer to fdt blob */
- beqi r7, no_fdt_arg
+/* r7 may point to an FDT, or there may be one linked in.
+ if it's in r7, we've got to save it away ASAP.
+ We ensure r7 points to a valid FDT, just in case the bootloader
+ is broken or non-existent */
+ beqi r7, no_fdt_arg /* NULL pointer? don't copy */
+ lw r11, r0, r7 /* Does r7 point to a */
+ rsubi r11, r11, OF_DT_HEADER /* valid FDT? */
+ beqi r11, _prepare_copy_fdt
+ or r7, r0, r0 /* clear R7 when not valid DTB */
+ bnei r11, no_fdt_arg /* No - get out of here */
+_prepare_copy_fdt:
or r11, r0, r0 /* incremment */
- ori r4, r0, TOPHYS(_fdt_start) /* save bram context */
+ ori r4, r0, TOPHYS(_fdt_start)
ori r3, r0, (0x4000 - 4)
_copy_fdt:
lw r12, r7, r11 /* r12 = r7 + r11 */
#include <asm/mmu.h>
#include <asm/pgtable.h>
+#include <asm/signal.h>
#include <asm/asm-offsets.h>
/* Helpful Macros */
mfs r17, rbtr; /* ESR[DS] set - return address in BTR */
nop
_no_delayslot:
-#endif
-
-#ifdef CONFIG_MMU
- /* Check if unaligned address is last on a 4k page */
- andi r5, r4, 0xffc
- xori r5, r5, 0xffc
- bnei r5, _unaligned_ex2
- _unaligned_ex1:
- RESTORE_STATE;
-/* Another page must be accessed or physical address not in page table */
- bri unaligned_data_trap
-
- _unaligned_ex2:
+ /* jump to high level unaligned handler */
+ RESTORE_STATE;
+ bri unaligned_data_trap
#endif
andi r6, r3, 0x3E0; /* Mask and extract the register operand */
srl r6, r6; /* r6 >> 5 */
srl r6, r6;
/* Store the register operand in a temporary location */
sbi r6, r0, TOPHYS(ex_reg_op);
-#ifdef CONFIG_MMU
- /* Get physical address */
- /* If we are faulting a kernel address, we have to use the
- * kernel page tables.
- */
- ori r5, r0, CONFIG_KERNEL_START
- cmpu r5, r4, r5
- bgti r5, _unaligned_ex3
- ori r5, r0, swapper_pg_dir
- bri _unaligned_ex4
-
- /* Get the PGD for the current thread. */
-_unaligned_ex3: /* user thread */
- addi r5 ,CURRENT_TASK, TOPHYS(0); /* get current task address */
- lwi r5, r5, TASK_THREAD + PGDIR
-_unaligned_ex4:
- tophys(r5,r5)
- BSRLI(r6,r4,20) /* Create L1 (pgdir/pmd) address */
- andi r6, r6, 0xffc
-/* Assume pgdir aligned on 4K boundary, no need for "andi r5,r5,0xfffff003" */
- or r5, r5, r6
- lwi r6, r5, 0 /* Get L1 entry */
- andi r5, r6, 0xfffff000 /* Extract L2 (pte) base address. */
- beqi r5, _unaligned_ex1 /* Bail if no table */
-
- tophys(r5,r5)
- BSRLI(r6,r4,10) /* Compute PTE address */
- andi r6, r6, 0xffc
- andi r5, r5, 0xfffff003
- or r5, r5, r6
- lwi r5, r5, 0 /* Get Linux PTE */
-
- andi r6, r5, _PAGE_PRESENT
- beqi r6, _unaligned_ex1 /* Bail if no page */
-
- andi r5, r5, 0xfffff000 /* Extract RPN */
- andi r4, r4, 0x00000fff /* Extract offset */
- or r4, r4, r5 /* Create physical address */
-#endif /* CONFIG_MMU */
andi r6, r3, 0x400; /* Extract ESR[S] */
bnei r6, ex_sw;
andi r6, r3, 0x800; /* Extract ESR[W] - delay slot */
ex_lw_vm:
beqid r6, ex_lhw_vm;
- lbui r5, r4, 0; /* Exception address in r4 - delay slot */
+load1: lbui r5, r4, 0; /* Exception address in r4 - delay slot */
/* Load a word, byte-by-byte from destination address and save it in tmp space*/
la r6, r0, ex_tmp_data_loc_0;
sbi r5, r6, 0;
- lbui r5, r4, 1;
+load2: lbui r5, r4, 1;
sbi r5, r6, 1;
- lbui r5, r4, 2;
+load3: lbui r5, r4, 2;
sbi r5, r6, 2;
- lbui r5, r4, 3;
+load4: lbui r5, r4, 3;
sbi r5, r6, 3;
brid ex_lw_tail_vm;
/* Get the destination register value into r3 - delay slot */
* save it in tmp space */
la r6, r0, ex_tmp_data_loc_0;
sbi r5, r6, 0;
- lbui r5, r4, 1;
+load5: lbui r5, r4, 1;
sbi r5, r6, 1;
lhui r3, r6, 0; /* Get the destination register value into r3 */
ex_lw_tail_vm:
swi r3, r5, 0; /* Get the word - delay slot */
/* Store the word, byte-by-byte into destination address */
lbui r3, r5, 0;
- sbi r3, r4, 0;
+store1: sbi r3, r4, 0;
lbui r3, r5, 1;
- sbi r3, r4, 1;
+store2: sbi r3, r4, 1;
lbui r3, r5, 2;
- sbi r3, r4, 2;
+store3: sbi r3, r4, 2;
lbui r3, r5, 3;
brid ret_from_exc;
- sbi r3, r4, 3; /* Delay slot */
+store4: sbi r3, r4, 3; /* Delay slot */
ex_shw_vm:
/* Store the lower half-word, byte-by-byte into destination address */
lbui r3, r5, 2;
- sbi r3, r4, 0;
+store5: sbi r3, r4, 0;
lbui r3, r5, 3;
brid ret_from_exc;
- sbi r3, r4, 1; /* Delay slot */
+store6: sbi r3, r4, 1; /* Delay slot */
ex_sw_end_vm: /* Exception handling of store word, ends. */
+
+/* We have to prevent cases that get/put_user macros get unaligned pointer
+ * to bad page area. We have to find out which origin instruction caused it
+ * and called fixup for that origin instruction not instruction in unaligned
+ * handler */
+ex_unaligned_fixup:
+ ori r5, r7, 0 /* setup pointer to pt_regs */
+ lwi r6, r7, PT_PC; /* faulting address is one instruction above */
+ addik r6, r6, -4 /* for finding proper fixup */
+ swi r6, r7, PT_PC; /* a save back it to PT_PC */
+ addik r7, r0, SIGSEGV
+ /* call bad_page_fault for finding aligned fixup, fixup address is saved
+ * in PT_PC which is used as return address from exception */
+ la r15, r0, ret_from_exc-8 /* setup return address */
+ brid bad_page_fault
+ nop
+
+/* We prevent all load/store because it could failed any attempt to access */
+.section __ex_table,"a";
+ .word load1,ex_unaligned_fixup;
+ .word load2,ex_unaligned_fixup;
+ .word load3,ex_unaligned_fixup;
+ .word load4,ex_unaligned_fixup;
+ .word load5,ex_unaligned_fixup;
+ .word store1,ex_unaligned_fixup;
+ .word store2,ex_unaligned_fixup;
+ .word store3,ex_unaligned_fixup;
+ .word store4,ex_unaligned_fixup;
+ .word store5,ex_unaligned_fixup;
+ .word store6,ex_unaligned_fixup;
+.previous;
.end _unaligned_data_exception
#endif /* CONFIG_MMU */
#include <linux/irq.h>
#include <asm/page.h>
#include <linux/io.h>
+#include <linux/bug.h>
#include <asm/prom.h>
#include <asm/irq.h>
if (intc)
break;
}
+ BUG_ON(!intc);
intc_baseaddr = *(int *) of_get_property(intc, "reg", NULL);
intc_baseaddr = (unsigned long) ioremap(intc_baseaddr, PAGE_SIZE);
}
EXPORT_SYMBOL_GPL(irq_of_parse_and_map);
-/*
- * 'what should we do if we get a hw irq event on an illegal vector'.
- * each architecture has to answer this themselves.
- */
-void ack_bad_irq(unsigned int irq)
-{
- printk(KERN_WARNING "unexpected IRQ trap at vector %02x\n", irq);
-}
-
static u32 concurrent_irq;
void do_IRQ(struct pt_regs *regs)
Elf32_Rela *rela = (void *)sechdrs[relsec].sh_addr;
Elf32_Sym *sym;
unsigned long int *location;
- unsigned long int locoffs;
unsigned long int value;
#if __GNUC__ < 4
unsigned long int old_value;
break;
case R_MICROBLAZE_64_PCREL:
- locoffs = (location[0] & 0xFFFF) << 16 |
+#if __GNUC__ < 4
+ old_value = (location[0] & 0xFFFF) << 16 |
(location[1] & 0xFFFF);
- value -= (unsigned long int)(location) + 4 +
- locoffs;
+ value -= old_value;
+#endif
+ value -= (unsigned long int)(location) + 4;
location[0] = (location[0] & 0xFFFF0000) |
(value >> 16);
location[1] = (location[1] & 0xFFFF0000) |
value);
break;
+ case R_MICROBLAZE_32_PCREL_LO:
+ pr_debug("R_MICROBLAZE_32_PCREL_LO\n");
+ break;
+
+ case R_MICROBLAZE_64_NONE:
+ pr_debug("R_MICROBLAZE_NONE\n");
+ break;
+
case R_MICROBLAZE_NONE:
pr_debug("R_MICROBLAZE_NONE\n");
break;
printk(KERN_ERR "module %s: "
"Unknown relocation: %u\n",
module->name,
- ELF32_R_TYPE(rela->r_info));
+ ELF32_R_TYPE(rela[i].r_info));
return -ENOEXEC;
}
}
setup_early_printk(NULL);
#endif
- early_printk("Ramdisk addr 0x%08x, FDT 0x%08x\n", ram, fdt);
- printk(KERN_NOTICE "Found FDT at 0x%08x\n", fdt);
+ early_printk("Ramdisk addr 0x%08x, ", ram);
+ if (fdt)
+ early_printk("FDT at 0x%08x\n", fdt);
+ else
+ early_printk("Compiled-in FDT at 0x%08x\n",
+ (unsigned int)_fdt_start);
#ifdef CONFIG_MTD_UCLINUX
early_printk("Found romfs @ 0x%08x (0x%08x)\n",
#include <linux/unistd.h>
#include <asm/syscalls.h>
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly. This will be remove with new toolchain.
- */
-asmlinkage long
-sys_ipc(uint call, int first, int second, int third, void *ptr, long fifth)
-{
- int version, ret;
-
- version = call >> 16; /* hack for backward compatibility */
- call &= 0xffff;
-
- ret = -EINVAL;
- switch (call) {
- case SEMOP:
- ret = sys_semop(first, (struct sembuf *)ptr, second);
- break;
- case SEMGET:
- ret = sys_semget(first, second, third);
- break;
- case SEMCTL:
- {
- union semun fourth;
-
- if (!ptr)
- break;
- ret = (access_ok(VERIFY_READ, ptr, sizeof(long)) ? 0 : -EFAULT)
- || (get_user(fourth.__pad, (void **)ptr)) ;
- if (ret)
- break;
- ret = sys_semctl(first, second, third, fourth);
- break;
- }
- case MSGSND:
- ret = sys_msgsnd(first, (struct msgbuf *) ptr, second, third);
- break;
- case MSGRCV:
- switch (version) {
- case 0: {
- struct ipc_kludge tmp;
-
- if (!ptr)
- break;
- ret = (access_ok(VERIFY_READ, ptr, sizeof(tmp))
- ? 0 : -EFAULT) || copy_from_user(&tmp,
- (struct ipc_kludge *) ptr, sizeof(tmp));
- if (ret)
- break;
- ret = sys_msgrcv(first, tmp.msgp, second, tmp.msgtyp,
- third);
- break;
- }
- default:
- ret = sys_msgrcv(first, (struct msgbuf *) ptr,
- second, fifth, third);
- break;
- }
- break;
- case MSGGET:
- ret = sys_msgget((key_t) first, second);
- break;
- case MSGCTL:
- ret = sys_msgctl(first, second, (struct msqid_ds *) ptr);
- break;
- case SHMAT:
- switch (version) {
- default: {
- ulong raddr;
- ret = access_ok(VERIFY_WRITE, (ulong *) third,
- sizeof(ulong)) ? 0 : -EFAULT;
- if (ret)
- break;
- ret = do_shmat(first, (char *) ptr, second, &raddr);
- if (ret)
- break;
- ret = put_user(raddr, (ulong *) third);
- break;
- }
- case 1: /* iBCS2 emulator entry point */
- if (!segment_eq(get_fs(), get_ds()))
- break;
- ret = do_shmat(first, (char *) ptr, second,
- (ulong *) third);
- break;
- }
- break;
- case SHMDT:
- ret = sys_shmdt((char *)ptr);
- break;
- case SHMGET:
- ret = sys_shmget(first, second, third);
- break;
- case SHMCTL:
- ret = sys_shmctl(first, second, (struct shmid_ds *) ptr);
- break;
- }
- return ret;
-}
asmlinkage long microblaze_vfork(struct pt_regs *regs)
{
.long sys_wait4
.long sys_swapoff /* 115 */
.long sys_sysinfo
- .long sys_ipc
+ .long sys_ni_syscall /* old sys_ipc */
.long sys_fsync
.long sys_ni_syscall /* sys_sigreturn_wrapper */
.long sys_clone /* 120 */
.long sys_fchmodat
.long sys_faccessat
.long sys_ni_syscall /* pselect6 */
- .long sys_ni_syscall /* sys_ppoll */
+ .long sys_ppoll
.long sys_unshare /* 310 */
.long sys_set_robust_list
.long sys_get_robust_list
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/io.h>
+#include <linux/bug.h>
#include <asm/cpuinfo.h>
#include <asm/setup.h>
#include <asm/prom.h>
if (timer)
break;
}
+ BUG_ON(!timer);
timer_baseaddr = *(int *) of_get_property(timer, "reg", NULL);
timer_baseaddr = (unsigned long) ioremap(timer_baseaddr, PAGE_SIZE);
* It is called from do_page_fault above and from some of the procedures
* in traps.c.
*/
-static void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig)
+void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig)
{
const struct exception_table_entry *fixup;
/* MS: no context */
}
#endif /* CONFIG_KGDB */
- if (in_atomic() || mm == NULL) {
- /* FIXME */
- if (kernel_mode(regs)) {
- printk(KERN_EMERG
- "Page fault in kernel mode - Oooou!!! pid %d\n",
- current->pid);
- _exception(SIGSEGV, regs, code, address);
- return;
- }
+ if (in_atomic() || !mm) {
+ if (kernel_mode(regs))
+ goto bad_area_nosemaphore;
+
/* in_atomic() in user mode is really bad,
as is current->mm == NULL. */
printk(KERN_EMERG "Page fault in user mode with "
* (in case the address isn't page-aligned).
*/
#ifndef CONFIG_MMU
- map_size = init_bootmem_node(NODE_DATA(0), PFN_UP(TOPHYS((u32)_end)),
+ map_size = init_bootmem_node(NODE_DATA(0), PFN_UP(TOPHYS((u32)klimit)),
min_low_pfn, max_low_pfn);
#else
map_size = init_bootmem_node(&contig_page_data,
- PFN_UP(TOPHYS((u32)_end)), min_low_pfn, max_low_pfn);
+ PFN_UP(TOPHYS((u32)klimit)), min_low_pfn, max_low_pfn);
#endif
- lmb_reserve(PFN_UP(TOPHYS((u32)_end)) << PAGE_SHIFT, map_size);
+ lmb_reserve(PFN_UP(TOPHYS((u32)klimit)) << PAGE_SHIFT, map_size);
/* free bootmem is whole main memory */
free_bootmem(memory_start, memory_size);
/*
* MTX-1 platform devices registration
*
- * Copyright (C) 2007, Florian Fainelli <florian@openwrt.org>
+ * Copyright (C) 2007-2009, Florian Fainelli <florian@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
static int __init mtx1_register_devices(void)
{
- gpio_direction_input(207);
+ int rc;
+
+ rc = gpio_request(mtx1_gpio_button[0].gpio,
+ mtx1_gpio_button[0].desc);
+ if (rc < 0) {
+ printk(KERN_INFO "mtx1: failed to request %d\n",
+ mtx1_gpio_button[0].gpio);
+ goto out;
+ }
+ gpio_direction_input(mtx1_gpio_button[0].gpio);
+out:
return platform_add_devices(mtx1_devs, ARRAY_SIZE(mtx1_devs));
}
platform.o \
gpio.o \
clock.o
+EXTRA_CFLAGS += -Werror
iounmap(bootcr);
}
-static int tnetd7200_get_clock(int base, struct tnetd7200_clock *clock,
- u32 *bootcr, u32 bus_clock)
-{
- int divisor = ((readl(&clock->prediv) & 0x1f) + 1) *
- ((readl(&clock->postdiv) & 0x1f) + 1);
-
- if (*bootcr & BOOT_PLL_BYPASS)
- return base / divisor;
-
- return base * ((readl(&clock->mul) & 0xf) + 1) / divisor;
-}
-
-
static void tnetd7200_set_clock(int base, struct tnetd7200_clock *clock,
int prediv, int postdiv, int postdiv2, int mul, u32 frequency)
{
size <<= 1;
} while (size < (64 << 20));
- writel(tmpaddr, &addr);
+ writel((u32)tmpaddr, &addr);
return size;
}
#include <linux/serial_8250.h>
#include <linux/ioport.h>
#include <linux/io.h>
-#include <linux/version.h>
#include <linux/vlynq.h>
#include <linux/leds.h>
#include <linux/string.h>
.num_resources = 1,
};
-static u64 cpmac_dma_mask = DMA_32BIT_MASK;
+static u64 cpmac_dma_mask = DMA_BIT_MASK(32);
static struct platform_device cpmac_low = {
.id = 0,
.name = "cpmac",
.dev = {
.dma_mask = &cpmac_dma_mask,
- .coherent_dma_mask = DMA_32BIT_MASK,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &cpmac_low_data,
},
.resource = cpmac_low_res,
.name = "cpmac",
.dev = {
.dma_mask = &cpmac_dma_mask,
- .coherent_dma_mask = DMA_32BIT_MASK,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &cpmac_high_data,
},
.resource = cpmac_high_res,
static int __init ar7_register_devices(void)
{
int res;
+#ifdef CONFIG_SERIAL_8250
static struct uart_port uart_port[2];
memset(uart_port, 0, sizeof(struct uart_port) * 2);
if (res)
return res;
}
-
+#endif /* CONFIG_SERIAL_8250 */
res = platform_device_register(&physmap_flash);
if (res)
return res;
{
int i;
- for (i = 0; i < sizeof(psp_var_map); i++)
+ for (i = 0; i < ARRAY_SIZE(psp_var_map); i++)
if (psp_var_map[i].num == num)
return psp_var_map[i].value;
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*/
-#include <linux/version.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/pm.h>
void octeon_prepare_cpus(unsigned int max_cpus)
{
cvmx_write_csr(CVMX_CIU_MBOX_CLRX(cvmx_get_core_num()), 0xffffffff);
- if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt, IRQF_SHARED,
+ if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt, IRQF_DISABLED,
"mailbox0", mailbox_interrupt)) {
panic("Cannot request_irq(OCTEON_IRQ_MBOX0)\n");
}
- if (request_irq(OCTEON_IRQ_MBOX1, mailbox_interrupt, IRQF_SHARED,
+ if (request_irq(OCTEON_IRQ_MBOX1, mailbox_interrupt, IRQF_DISABLED,
"mailbox1", mailbox_interrupt)) {
panic("Cannot request_irq(OCTEON_IRQ_MBOX1)\n");
}
/*
- * linux/arch/mips/dec/ecc-berr.c
- *
* Bus error event handling code for systems equipped with ECC
* handling logic, i.e. DECstation/DECsystem 5000/200 (KN02),
* 5000/240 (KN03), 5000/260 (KN05) and DECsystem 5900 (KN03),
/*
- * arch/mips/dec/int-handler.S
- *
* Copyright (C) 1995, 1996, 1997 Paul M. Antoine and Harald Koerfgen
* Copyright (C) 2000, 2001, 2002, 2003, 2005 Maciej W. Rozycki
*
/*
- * linux/arch/mips/dec/ioasic-irq.c
- *
* DEC I/O ASIC interrupts.
*
* Copyright (c) 2002, 2003 Maciej W. Rozycki
/*
- * linux/arch/mips/dec/kn01-berr.c
- *
* Bus error event handling code for DECstation/DECsystem 3100
* and 2100 (KN01) systems equipped with parity error detection
* logic.
/*
- * linux/arch/mips/dec/kn02-irq.c
- *
* DECstation 5000/200 (KN02) Control and Status Register
* interrupts.
*
/*
- * linux/arch/mips/dec/kn02xa-berr.c
- *
* Bus error event handling code for 5000-series systems equipped
* with parity error detection logic, i.e. DECstation/DECsystem
* 5000/120, /125, /133 (KN02-BA), 5000/150 (KN04-BA) and Personal
/*
- * arch/mips/dec/prom/call_o32.S
- *
* O32 interface for the 64 (or N32) ABI.
*
* Copyright (C) 2002 Maciej W. Rozycki
/*
- * arch/mips/dec/prom/console.c
- *
* DECstation PROM-based early console support.
*
* Copyright (C) 2004, 2007 Maciej W. Rozycki
/*
- * linux/arch/mips/dec/time.c
- *
* Copyright (C) 1991, 1992, 1995 Linus Torvalds
* Copyright (C) 2000, 2003 Maciej W. Rozycki
*
#
-# arch/mips/emma2rh/common/Makefile
-# Makefile for the common code of NEC EMMA2RH based board.
-#
# Copyright (C) NEC Electronics Corporation 2005-2006
#
# This program is free software; you can redistribute it and/or modify
/*
- * arch/mips/emma2rh/common/prom.c
- * This file is prom file.
- *
* Copyright (C) NEC Electronics Corporation 2004-2006
*
* This file is based on the arch/mips/ddb5xxx/common/prom.c
#
-# arch/mips/emma2rh/markeins/Makefile
-# Makefile for the common code of NEC EMMA2RH based board.
-#
# Copyright (C) NEC Electronics Corporation 2005-2006
#
# This program is free software; you can redistribute it and/or modify
/*
- * arch/mips/emma2rh/markeins/irq.c
- * This file defines the irq handler for EMMA2RH.
- *
* Copyright (C) NEC Electronics Corporation 2004-2006
*
* This file is based on the arch/mips/ddb5xxx/ddb5477/irq.c
/*
- * arch/mips/emma2rh/markeins/led.c
- * This file defines the led display for Mark-eins.
- *
* Copyright (C) NEC Electronics Corporation 2004-2006
*
* This program is free software; you can redistribute it and/or modify
/*
- * arch/mips/emma2rh/markeins/platofrm.c
- * This file sets up platform devices for EMMA2RH Mark-eins.
- *
* Copyright(C) MontaVista Software Inc, 2006
*
* Author: dmitry pervushin <dpervushin@ru.mvista.com>
/*
- * arch/mips/emma2rh/markeins/setup.c
- * This file is setup for EMMA2RH Mark-eins.
- *
* Copyright (C) NEC Electronics Corporation 2004-2006
*
* This file is based on the arch/mips/ddb5xxx/ddb5477/setup.c.
/*
- * arch/mips/dec/prom/call_o32.S
- *
* O32 interface for the 64 (or N32) ABI.
*
* Copyright (C) 2002 Maciej W. Rozycki
/*
- * arch/mips/include/asm/emma/emma2rh.h
- * This file is EMMA2RH common header.
- *
* Copyright (C) NEC Electronics Corporation 2005-2006
*
* This file based on include/asm-mips/ddb5xxx/ddb5xxx.h
/*
- * include/asm-mips/emma2rh/markeins.h
- * This file is EMMA2RH board depended header.
- *
* Copyright (C) NEC Electronics Corporation 2005-2006
*
* This file based on include/asm-mips/ddb5xxx/ddb5xxx.h
#define GIC_TRIG_EDGE 1
#define GIC_TRIG_LEVEL 0
-#if CONFIG_SMP
+#ifdef CONFIG_SMP
#define GIC_NUM_INTRS (24 + NR_CPUS * 2)
#else
#define GIC_NUM_INTRS 32
#define PAGE_SIZE (1UL << PAGE_SHIFT)
#define PAGE_MASK (~((1 << PAGE_SHIFT) - 1))
+#ifdef CONFIG_HUGETLB_PAGE
#define HPAGE_SHIFT (PAGE_SHIFT + PAGE_SHIFT - 3)
#define HPAGE_SIZE ((1UL) << HPAGE_SHIFT)
#define HPAGE_MASK (~(HPAGE_SIZE - 1))
#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT)
+#endif /* CONFIG_HUGETLB_PAGE */
#ifndef __ASSEMBLY__
__free_pages(pte, PTE_ORDER);
}
-#define __pte_free_tlb(tlb,pte) \
+#define __pte_free_tlb(tlb,pte,address) \
do { \
pgtable_page_dtor(pte); \
tlb_remove_page((tlb), pte); \
} while (0)
-#ifdef CONFIG_32BIT
-
-/*
- * allocating and freeing a pmd is trivial: the 1-entry pmd is
- * inside the pgd, so has no extra memory associated with it.
- */
-#define pmd_free(mm, x) do { } while (0)
-#define __pmd_free_tlb(tlb, x) do { } while (0)
-
-#endif
-
#ifdef CONFIG_64BIT
static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
free_pages((unsigned long)pmd, PMD_ORDER);
}
-#define __pmd_free_tlb(tlb, x) pmd_free((tlb)->mm, x)
+#define __pmd_free_tlb(tlb, x, addr) pmd_free((tlb)->mm, x)
#endif
#if defined(CONFIG_PMC_MSP7120_EVAL) || defined(CONFIG_PMC_MSP7120_GW) || \
defined(CONFIG_PMC_MSP7120_FPGA)
#define MIPS34K_MISSED_ITLB_WAR 1
+#else
+#define MIPS34K_MISSED_ITLB_WAR 0
#endif
#endif /* __ASM_MIPS_PMC_SIERRA_WAR_H */
unsigned long get_wchan(struct task_struct *p);
-#define __KSTK_TOS(tsk) ((unsigned long)task_stack_page(tsk) + THREAD_SIZE - 32)
-#define task_pt_regs(tsk) ((struct pt_regs *)__KSTK_TOS(tsk) - 1)
+#define __KSTK_TOS(tsk) ((unsigned long)task_stack_page(tsk) + \
+ THREAD_SIZE - 32 - sizeof(struct pt_regs))
+#define task_pt_regs(tsk) ((struct pt_regs *)__KSTK_TOS(tsk))
#define KSTK_EIP(tsk) (task_pt_regs(tsk)->cp0_epc)
#define KSTK_ESP(tsk) (task_pt_regs(tsk)->regs[29])
#define KSTK_STATUS(tsk) (task_pt_regs(tsk)->cp0_status)
#define TIF_NEED_RESCHED 2 /* rescheduling necessary */
#define TIF_SYSCALL_AUDIT 3 /* syscall auditing active */
#define TIF_SECCOMP 4 /* secure computing */
+#define TIF_NOTIFY_RESUME 5 /* callback before returning to user */
#define TIF_RESTORE_SIGMASK 9 /* restore signal mask in do_signal() */
#define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */
#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */
#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
#define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT)
#define _TIF_SECCOMP (1<<TIF_SECCOMP)
+#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME)
#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
#define _TIF_USEDFPU (1<<TIF_USEDFPU)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define __NR_pwritev (__NR_Linux + 331)
#define __NR_rt_tgsigqueueinfo (__NR_Linux + 332)
#define __NR_perf_counter_open (__NR_Linux + 333)
+#define __NR_accept4 (__NR_Linux + 334)
/*
* Offset of the last Linux o32 flavoured syscall
*/
-#define __NR_Linux_syscalls 333
+#define __NR_Linux_syscalls 334
#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
#define __NR_O32_Linux 4000
-#define __NR_O32_Linux_syscalls 333
+#define __NR_O32_Linux_syscalls 334
#if _MIPS_SIM == _MIPS_SIM_ABI64
#define __NR_pwritev (__NR_Linux + 290)
#define __NR_rt_tgsigqueueinfo (__NR_Linux + 291)
#define __NR_perf_counter_open (__NR_Linux + 292)
+#define __NR_accept4 (__NR_Linux + 293)
/*
* Offset of the last Linux 64-bit flavoured syscall
*/
-#define __NR_Linux_syscalls 292
+#define __NR_Linux_syscalls 293
#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
#define __NR_64_Linux 5000
-#define __NR_64_Linux_syscalls 292
+#define __NR_64_Linux_syscalls 293
#if _MIPS_SIM == _MIPS_SIM_NABI32
#define __NR_pwritev (__NR_Linux + 294)
#define __NR_rt_tgsigqueueinfo (__NR_Linux + 295)
#define __NR_perf_counter_open (__NR_Linux + 296)
+#define __NR_accept4 (__NR_Linux + 297)
/*
* Offset of the last N32 flavoured syscall
*/
-#define __NR_Linux_syscalls 296
+#define __NR_Linux_syscalls 297
#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
#define __NR_N32_Linux 6000
-#define __NR_N32_Linux_syscalls 296
+#define __NR_N32_Linux_syscalls 297
#ifdef __KERNEL__
return -1;
}
- while (pgtbl[i].owner == laddr && i < VDMA_PGTBL_ENTRIES) {
+ while (i < VDMA_PGTBL_ENTRIES && pgtbl[i].owner == laddr) {
pgtbl[i].owner = VDMA_PAGE_EMPTY;
i++;
}
MTC0 zero, CP0_CONTEXT # clear context register
PTR_LA $28, init_thread_union
- PTR_LI sp, _THREAD_SIZE - 32
+ /* Set the SP after an empty pt_regs. */
+ PTR_LI sp, _THREAD_SIZE - 32 - PT_SIZE
PTR_ADDU sp, $28
set_saved_sp sp, t0, t1
PTR_SUBU sp, 4 * SZREG # init stack pointer
/*
- * linux/arch/mips/kernel/irq_txx9.c
- *
* Based on linux/arch/mips/jmr3927/rbhma3100/irq.c,
* linux/arch/mips/tx4927/common/tx4927_irq.c,
* linux/arch/mips/tx4938/common/irq.c
static int apply_r_mips_26_rel(struct module *me, u32 *location, Elf_Addr v)
{
if (v % 4) {
- printk(KERN_ERR "module %s: dangerous relocation\n", me->name);
+ pr_err("module %s: dangerous R_MIPS_26 REL relocation\n",
+ me->name);
return -ENOEXEC;
}
static int apply_r_mips_26_rela(struct module *me, u32 *location, Elf_Addr v)
{
if (v % 4) {
- printk(KERN_ERR "module %s: dangerous relocation\n", me->name);
+ pr_err("module %s: dangerous R_MIPS_26 RELArelocation\n",
+ me->name);
return -ENOEXEC;
}
return 0;
out_danger:
- printk(KERN_ERR "module %s: dangerous " "relocation\n", me->name);
+ pr_err("module %s: dangerous R_MIPS_LO16 REL relocation\n", me->name);
return -ENOEXEC;
}
/* This is the symbol it is referring to */
sym = (Elf_Sym *)sechdrs[symindex].sh_addr
+ ELF_MIPS_R_SYM(rel[i]);
- if (!sym->st_value) {
+ if (IS_ERR_VALUE(sym->st_value)) {
/* Ignore unresolved weak symbol */
if (ELF_ST_BIND(sym->st_info) == STB_WEAK)
continue;
/* This is the symbol it is referring to */
sym = (Elf_Sym *)sechdrs[symindex].sh_addr
+ ELF_MIPS_R_SYM(rel[i]);
- if (!sym->st_value) {
+ if (IS_ERR_VALUE(sym->st_value)) {
/* Ignore unresolved weak symbol */
if (ELF_ST_BIND(sym->st_info) == STB_WEAK)
continue;
/*
- * linux/arch/mips/kernel/proc.c
- *
* Copyright (C) 1995, 1996, 2001 Ralf Baechle
* Copyright (C) 2001, 2004 MIPS Technologies, Inc.
* Copyright (C) 2004 Maciej W. Rozycki
{
struct thread_info *ti = task_thread_info(p);
struct pt_regs *childregs;
- long childksp;
+ unsigned long childksp;
p->set_child_tid = p->clear_child_tid = NULL;
childksp = (unsigned long)task_stack_page(p) + THREAD_SIZE - 32;
/* set up new TSS. */
childregs = (struct pt_regs *) childksp - 1;
+ /* Put the stack after the struct pt_regs. */
+ childksp = (unsigned long) childregs;
*childregs = *regs;
childregs->regs[7] = 0; /* Clear error flag */
sys sys_pwritev 6
sys sys_rt_tgsigqueueinfo 4
sys sys_perf_counter_open 5
+ sys sys_accept4 4
.endm
/* We pre-compute the number of _instruction_ bytes needed to
PTR sys_pwritev /* 5390 */
PTR sys_rt_tgsigqueueinfo
PTR sys_perf_counter_open
+ PTR sys_accept4
.size sys_call_table,.-sys_call_table
PTR sys_pwritev
PTR compat_sys_rt_tgsigqueueinfo /* 5295 */
PTR sys_perf_counter_open
+ PTR sys_accept4
.size sysn32_call_table,.-sysn32_call_table
PTR compat_sys_pwritev
PTR compat_sys_rt_tgsigqueueinfo
PTR sys_perf_counter_open
+ PTR sys_accept4
.size sys_call_table,.-sys_call_table
#include <linux/compiler.h>
#include <linux/syscalls.h>
#include <linux/uaccess.h>
+#include <linux/tracehook.h>
#include <asm/abi.h>
#include <asm/asm.h>
/* deal with pending signal delivery */
if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
do_signal(regs);
+
+ if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+ clear_thread_flag(TIF_NOTIFY_RESUME);
+ tracehook_notify_resume(regs);
+ if (current->replacement_session_keyring)
+ key_replace_session_keyring();
+ }
}
smtc_configure_tlb();
for (tc = 0, vpe = 0 ; (vpe < nvpe) && (tc < ntc) ; vpe++) {
- /*
- * Set the MVP bits.
- */
- settc(tc);
- write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_MVP);
+ if (tcpervpe[vpe] == 0)
+ continue;
if (vpe != 0)
printk(", ");
printk("VPE %d: TC", vpe);
tc++;
}
if (vpe != 0) {
+ /*
+ * Allow this VPE to control others.
+ */
+ write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() |
+ VPECONF0_MVP);
+
/*
* Clear any stale software interrupts from VPE's Cause
*/
/*
- * arch/mips/kernel/stacktrace.c
- *
* Stack trace management functions
*
* Copyright (C) 2006 Atsushi Nemoto <anemo@mba.ocn.ne.jp>
static const int minor = 1; /* fixed for now */
#ifdef CONFIG_MIPS_APSP_KSPD
- static struct kspd_notifications kspd_events;
+static struct kspd_notifications kspd_events;
static int kspd_events_reqd = 0;
#endif
};
static void release_progmem(void *ptr);
-extern void save_gp_address(unsigned int secbase, unsigned int rel);
/* get the vpe associated with this minor */
-struct vpe *get_vpe(int minor)
+static struct vpe *get_vpe(int minor)
{
struct vpe *v;
}
/* get the vpe associated with this minor */
-struct tc *get_tc(int index)
+static struct tc *get_tc(int index)
{
struct tc *t;
return NULL;
}
-struct tc *get_tc_unused(void)
-{
- struct tc *t;
-
- list_for_each_entry(t, &vpecontrol.tc_list, list) {
- if (t->state == TC_STATE_UNUSED)
- return t;
- }
-
- return NULL;
-}
-
/* allocate a vpe and associate it with this minor (or index) */
-struct vpe *alloc_vpe(int minor)
+static struct vpe *alloc_vpe(int minor)
{
struct vpe *v;
}
/* allocate a tc. At startup only tc0 is running, all other can be halted. */
-struct tc *alloc_tc(int index)
+static struct tc *alloc_tc(int index)
{
struct tc *tc;
}
/* clean up and free everything */
-void release_vpe(struct vpe *v)
+static void release_vpe(struct vpe *v)
{
list_del(&v->list);
if (v->load_addr)
kfree(v);
}
-void dump_mtregs(void)
+static void dump_mtregs(void)
{
unsigned long val;
|| (s->sh_flags & masks[m][1])
|| s->sh_entsize != ~0UL)
continue;
- s->sh_entsize = get_offset(&mod->core_size, s);
+ s->sh_entsize =
+ get_offset((unsigned long *)&mod->core_size, s);
}
if (m == 0)
{
unsigned long insnlo = *location;
Elf32_Addr val, vallo;
+ struct mips_hi16 *l, *next;
/* Sign extend the addend we extract from the lo insn. */
vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000;
if (mips_hi16_list != NULL) {
- struct mips_hi16 *l;
l = mips_hi16_list;
while (l != NULL) {
- struct mips_hi16 *next;
unsigned long insn;
/*
printk(KERN_DEBUG "VPE loader: "
"apply_r_mips_lo16/hi16: \t"
"inconsistent value information\n");
- return -ENOEXEC;
+ goto out_free;
}
/*
*location = insnlo;
return 0;
+
+out_free:
+ while (l != NULL) {
+ next = l->next;
+ kfree(l);
+ l = next;
+ }
+ mips_hi16_list = NULL;
+
+ return -ENOEXEC;
}
static int (*reloc_handlers[]) (struct module *me, uint32_t *location,
[R_MIPS_PC16] = "MIPS_PC16"
};
-int apply_relocations(Elf32_Shdr *sechdrs,
+static int apply_relocations(Elf32_Shdr *sechdrs,
const char *strtab,
unsigned int symindex,
unsigned int relsec,
return 0;
}
-void save_gp_address(unsigned int secbase, unsigned int rel)
+static inline void save_gp_address(unsigned int secbase, unsigned int rel)
{
gp_addr = secbase + rel;
gp_offs = gp_addr - (secbase & 0xffff0000);
if (cpu_has_veic) {
set_vi_handler(MSC01E_INT_CPUCTR, mips_timer_dispatch);
mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR;
- } else {
-#endif
- {
- if (cpu_has_vint)
- set_vi_handler(cp0_compare_irq, mips_timer_dispatch);
- mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
+
+ return mips_cpu_timer_irq;
}
+#endif
+ if (cpu_has_vint)
+ set_vi_handler(cp0_compare_irq, mips_timer_dispatch);
+ mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
return mips_cpu_timer_irq;
}
}
/**
- * Called when the the exception is not recoverable
+ * Called when the the exception is recoverable
*/
asmlinkage void cache_parity_error_octeon_recoverable(void)
}
/**
- * Called when the the exception is recoverable
+ * Called when the the exception is not recoverable
*/
asmlinkage void cache_parity_error_octeon_non_recoverable(void)
/*
- * linux/arch/mips/mm/extable.c
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1997, 99, 2001 - 2004 Ralf Baechle <ralf@linux-mips.org>
*/
#include <linux/module.h>
#include <linux/spinlock.h>
* We ran out of memory, call the OOM killer, and return the userspace
* (which will retry the fault, or kill us if we got oom-killed).
*/
+ up_read(&mm->mmap_sem);
pagefault_out_of_memory();
return;
.flags = IRQF_DISABLED|IRQF_PERCPU,
.name = "IPI_call"
};
+#endif /* CONFIG_MIPS_MT_SMP */
static int gic_resched_int_base;
static int gic_call_int_base;
{
return GIC_RESCHED_INT(cpu);
}
-#endif /* CONFIG_MIPS_MT_SMP */
static struct irqaction i8259irq = {
.handler = no_action,
* HZ timer interrupts per second.
*/
mips_hpt_frequency = 27UL * ((1000000UL * n)/(m * pow2p));
- cpj = (mips_hpt_frequency + HZ / 2) / HZ;
+ cpj = DIV_ROUND_CLOSEST(mips_hpt_frequency, HZ);
write_c0_count(0);
timer_ack();
/*
- * arch/mips/pci/fixup-emma2rh.c
- * This file defines the PCI configration.
- *
* Copyright (C) NEC Electronics Corporation 2004-2006
*
* This file is based on the arch/mips/ddb5xxx/ddb5477/pci.c
/*
- * arch/mips/pci/fixup-sb1250.c
- *
* Copyright (C) 2004, 2006 MIPS Technologies, Inc. All rights reserved.
* Author: Maciej W. Rozycki <macro@mips.com>
*
/*
- * arch/mips/pci/ops-emma2rh.c
- * This file defines the PCI operation for EMMA2RH.
- *
* Copyright (C) NEC Electronics Corporation 2004-2006
*
* This file is based on the arch/mips/pci/ops-vr41xx.c
/*
- * arch/mips/pci/pci-emma2rh.c
- * This file defines the PCI configration.
- *
* Copyright (C) NEC Electronics Corporation 2004-2006
*
* This file is based on the arch/mips/ddb5xxx/ddb5477/pci.c
/*
- * linux/arch/mips/pci/pci-tx4927.c
- *
* Based on linux/arch/mips/txx9/rbtx4938/setup.c,
* and RBTX49xx patch from CELF patch archive.
*
/*
- * linux/arch/mips/pci/pci-tx4938.c
- *
* Based on linux/arch/mips/txx9/rbtx4938/setup.c,
* and RBTX49xx patch from CELF patch archive.
*
/*
- * linux/arch/mips/pci/pci-tx4939.c
- *
* Based on linux/arch/mips/txx9/rbtx4939/setup.c,
* and RBTX49xx patch from CELF patch archive.
*
int bus_number = bus->number;
/*
- * We need to force the bus number to be zero on the root
- * bus. Linux numbers the 2nd root bus to start after all
- * buses on root 0.
+ * For the top level bus make sure our hardware bus number
+ * matches the software one.
*/
- if (bus->parent == NULL)
- bus_number = 0;
+ if (bus->parent == NULL) {
+ union cvmx_pciercx_cfg006 pciercx_cfg006;
+ pciercx_cfg006.u32 = cvmx_pcie_cfgx_read(pcie_port,
+ CVMX_PCIERCX_CFG006(pcie_port));
+ if (pciercx_cfg006.s.pbnum != bus_number) {
+ pciercx_cfg006.s.pbnum = bus_number;
+ pciercx_cfg006.s.sbnum = bus_number;
+ pciercx_cfg006.s.subbnum = bus_number;
+ cvmx_pcie_cfgx_write(pcie_port,
+ CVMX_PCIERCX_CFG006(pcie_port),
+ pciercx_cfg006.u32);
+ }
+ }
/*
* PCIe only has a single device connected to Octeon. It is
* always device ID 0. Don't bother doing reads for other
* device IDs on the first segment.
*/
- if ((bus_number == 0) && (devfn >> 3 != 0))
+ if ((bus->parent == NULL) && (devfn >> 3 != 0))
return PCIBIOS_FUNC_NOT_SUPPORTED;
/*
* bridge only respondes to device ID 0, function
* 0-1
*/
- if ((bus_number == 0) && (devfn >= 2))
+ if ((bus->parent == NULL) && (devfn >= 2))
return PCIBIOS_FUNC_NOT_SUPPORTED;
/*
* The PCI-X slots are device ID 2,3. Choose one of
int size, u32 val)
{
int bus_number = bus->number;
- /*
- * We need to force the bus number to be zero on the root
- * bus. Linux numbers the 2nd root bus to start after all
- * busses on root 0.
- */
- if (bus->parent == NULL)
- bus_number = 0;
switch (size) {
case 4:
/*
- * @file /arch/mips/pmc-sierra/msp71xx/gpio.c
- *
* Generic PMC MSP71xx GPIO handling. These base gpio are controlled by two
* types of registers. The data register sets the output level when in output
* mode and when in input mode will contain the value at the input. The config
/*
- * @file /arch/mips/pmc-sierra/msp71xx/gpio_extended.c
- *
* Generic PMC MSP71xx EXTENDED (EXD) GPIO handling. The extended gpio is
* a set of hardware registers that have no need for explicit locking as
* it is handled by unique method of writing individual set/clr bits.
*/
static inline void ack_msp_slp_irq(unsigned int irq)
{
- mask_slp_irq(irq);
-
- /*
- * only really necessary for 18, 16-14 and sometimes 3:0 (since
- * these can be edge sensitive) but it doesn't hurt for the others.
- */
-
/* check for PER interrupt range */
if (irq < MSP_PER_INTBASE)
*SLP_INT_STS_REG = (1 << (irq - MSP_SLP_INTBASE));
static struct irq_chip msp_slp_irq_controller = {
.name = "MSP_SLP",
.ack = ack_msp_slp_irq,
- .mask = ack_msp_slp_irq,
- .mask_ack = ack_msp_slp_irq,
+ .mask = mask_msp_slp_irq,
.unmask = unmask_msp_slp_irq,
};
/* initialize all the IRQ descriptors */
for (i = MSP_SLP_INTBASE; i < MSP_PER_INTBASE + 32; i++)
- set_irq_chip_and_handler(i, &msp_slp_irq_controller
+ set_irq_chip_and_handler(i, &msp_slp_irq_controller,
handle_level_irq);
}
/*
- * arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c
- *
* Copyright (C) 2003 PMC-Sierra Inc.
* Author: Manish Lachwani (lachwani@pmc-sierra.com)
*
/*
- * arch/mips/sibyte/swarm/swarm-i2c.c
- *
* Broadcom BCM91250A (SWARM), etc. I2C platform setup.
*
* Copyright (c) 2008 Maciej W. Rozycki
/*
- * linux/arch/mips/txx9/generic/mem_tx4927.c
- *
* common tx4927 memory interface
*
* Author: MontaVista Software, Inc.
/*
- * linux/arch/mips/txx9/generic/setup.c
- *
* Based on linux/arch/mips/txx9/rbtx4938/setup.c,
* and RBTX49xx patch from CELF patch archive.
*
rbtx4939_ebusc_setup();
/* always enable ATA0 */
txx9_set64(&tx4939_ccfgptr->pcfg, TX4939_PCFG_ATA0MODE);
- rbtx4939_update_ioc_pen();
if (txx9_master_clock == 0)
txx9_master_clock = 20000000;
tx4939_setup();
+ rbtx4939_update_ioc_pen();
#ifdef HAVE_RBTX4939_IOSWAB
ioswabw = rbtx4939_ioswabw;
__mem_ioswabw = rbtx4939_mem_ioswabw;
#include <linux/slab.h>
#include <asm/scatterlist.h>
#include <linux/string.h>
-#include <linux/mm.h>
#include <asm/io.h>
struct pci_dev;
}
-#define __pte_free_tlb(tlb, pte) tlb_remove_page((tlb), (pte))
+#define __pte_free_tlb(tlb, pte, addr) tlb_remove_page((tlb), (pte))
#endif /* _ASM_PGALLOC_H */
if (thread_info_flags & _TIF_NOTIFY_RESUME) {
clear_thread_flag(TIF_NOTIFY_RESUME);
tracehook_notify_resume(__frame);
+ if (current->replacement_session_keyring)
+ key_replace_session_keyring();
}
}
__init_end = .;
/* freed after init ends here */
- BSS(4)
+ BSS_SECTION(0, PAGE_SIZE, 4)
_end = . ;
#define TIF_MEMDIE 5
#define TIF_RESTORE_SIGMASK 6 /* restore saved signal mask */
#define TIF_FREEZE 7 /* is freezing for suspend */
+#define TIF_NOTIFY_RESUME 8 /* callback before returning to user */
#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
#define _TIF_32BIT (1 << TIF_32BIT)
#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK)
#define _TIF_FREEZE (1 << TIF_FREEZE)
+#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
-#define _TIF_USER_WORK_MASK (_TIF_SIGPENDING | \
+#define _TIF_USER_WORK_MASK (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | \
_TIF_NEED_RESCHED | _TIF_RESTORE_SIGMASK)
#endif /* __KERNEL__ */
#include <asm-generic/tlb.h>
-#define __pmd_free_tlb(tlb, pmd) pmd_free((tlb)->mm, pmd)
-#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, pte)
+#define __pmd_free_tlb(tlb, pmd, addr) pmd_free((tlb)->mm, pmd)
+#define __pte_free_tlb(tlb, pte, addr) pte_free((tlb)->mm, pte)
#endif
* on most of those machines only handles cache transactions.
*/
extrd,u,*= \pte,_PAGE_NO_CACHE_BIT+32,1,%r0
- depi 1,12,1,\prot
+ depdi 1,12,1,\prot
/* Drop prot bits and convert to page addr for iitlbt and idtlbt */
convert_for_tlb_insert20 \pte
/* As above */
mfctl %cr30,%r1
LDREG TI_FLAGS(%r1),%r19
- ldi (_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK), %r20
+ ldi (_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK|_TIF_NOTIFY_RESUME), %r20
and,COND(<>) %r19, %r20, %r0
b,n intr_restore /* skip past if we've nothing to do */
* the bottom of the table, which has a maximum signed displacement of
* 0x3fff; however, since we're only going forward, this becomes
* 0x1fff, and thus, since each GOT entry is 8 bytes long we can have
- * at most 1023 entries */
-#define MAX_GOTS 1023
+ * at most 1023 entries.
+ * To overcome this 14bit displacement with some kernel modules, we'll
+ * use instead the unusal 16bit displacement method (see reassemble_16a)
+ * which gives us a maximum positive displacement of 0x7fff, and as such
+ * allows us to allocate up to 4095 GOT entries. */
+#define MAX_GOTS 4095
/* three functions to determine where in the module core
* or init pieces the location is */
/* The reassemble_* functions prepare an immediate value for
insertion into an opcode. pa-risc uses all sorts of weird bitfields
in the instruction to hold the value. */
+static inline int sign_unext(int x, int len)
+{
+ int len_ones;
+
+ len_ones = (1 << len) - 1;
+ return x & len_ones;
+}
+
+static inline int low_sign_unext(int x, int len)
+{
+ int sign, temp;
+
+ sign = (x >> (len-1)) & 1;
+ temp = sign_unext(x, len-1);
+ return (temp << 1) | sign;
+}
+
static inline int reassemble_14(int as14)
{
return (((as14 & 0x1fff) << 1) |
((as14 & 0x2000) >> 13));
}
+static inline int reassemble_16a(int as16)
+{
+ int s, t;
+
+ /* Unusual 16-bit encoding, for wide mode only. */
+ t = (as16 << 1) & 0xffff;
+ s = (as16 & 0x8000);
+ return (t ^ s ^ (s >> 1)) | (s >> 15);
+}
+
+
static inline int reassemble_17(int as17)
{
return (((as17 & 0x10000) >> 16) |
enum elf_stub_type stub_type, Elf_Addr loc0, unsigned int targetsec)
{
struct stub_entry *stub;
+ int __maybe_unused d;
/* initialize stub_offset to point in front of the section */
if (!me->arch.section[targetsec].stub_offset) {
*/
switch (stub_type) {
case ELF_STUB_GOT:
- stub->insns[0] = 0x537b0000; /* ldd 0(%dp),%dp */
+ d = get_got(me, value, addend);
+ if (d <= 15) {
+ /* Format 5 */
+ stub->insns[0] = 0x0f6010db; /* ldd 0(%dp),%dp */
+ stub->insns[0] |= low_sign_unext(d, 5) << 16;
+ } else {
+ /* Format 3 */
+ stub->insns[0] = 0x537b0000; /* ldd 0(%dp),%dp */
+ stub->insns[0] |= reassemble_16a(d);
+ }
stub->insns[1] = 0x53610020; /* ldd 10(%dp),%r1 */
stub->insns[2] = 0xe820d000; /* bve (%r1) */
stub->insns[3] = 0x537b0030; /* ldd 18(%dp),%dp */
-
- stub->insns[0] |= reassemble_14(get_got(me, value, addend) & 0x3fff);
break;
case ELF_STUB_MILLI:
stub->insns[0] = 0x20200000; /* ldil 0,%r1 */
#include <linux/stddef.h>
#include <linux/compat.h>
#include <linux/elf.h>
+#include <linux/tracehook.h>
#include <asm/ucontext.h>
#include <asm/rt_sigframe.h>
#include <asm/uaccess.h>
if (test_thread_flag(TIF_SIGPENDING) ||
test_thread_flag(TIF_RESTORE_SIGMASK))
do_signal(regs, in_syscall);
+
+ if (test_thread_flag(TIF_NOTIFY_RESUME)) {
+ clear_thread_flag(TIF_NOTIFY_RESUME);
+ tracehook_notify_resume(regs);
+ if (current->replacement_session_keyring)
+ key_replace_session_keyring();
+ }
}
/* Kill the user process later */
regs->iaoq[0] = 0 | 3;
regs->iaoq[1] = regs->iaoq[0] + 4;
- regs->iasq[0] = regs->iasq[0] = regs->sr[7];
+ regs->iasq[0] = regs->iasq[1] = regs->sr[7];
regs->gr[0] &= ~PSW_B;
return;
}
bus-range = <0 0>;
ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
- 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+ 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
sleep = <&pmc 0x00010000>;
clock-frequency = <66666666>;
#interrupt-cells = <1>;
bus-range = <0 0>;
ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
- 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+ 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
sleep = <&pmc 0x00010000>;
clock-frequency = <66666666>;
#interrupt-cells = <1>;
bus-range = <0x0 0x0>;
ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
- 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+ 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
sleep = <&pmc 0x00010000>;
clock-frequency = <66666666>;
#interrupt-cells = <1>;
reg = <0x6>;
device_type = "ethernet-phy";
};
+ tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
mdio@3520 {
#address-cells = <1>;
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:05 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:02 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
CONFIG_FSL_EMB_PERFMON=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_REDBOOT=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_MPC837x_RDB is not set
# CONFIG_SBC834x is not set
CONFIG_ASP834x=y
+# CONFIG_KMETER1 is not set
CONFIG_PPC_MPC834x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28
-# Fri Apr 3 10:34:33 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:03 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_KMETER1=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_QUICC_ENGINE=y
# CONFIG_QE_GPIO is not set
# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
#
# Kernel options
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI_DEBUG_MSG is not set
# CONFIG_MTD_UBI_DEBUG_PARANOID is not set
# CONFIG_MTD_UBI_DEBUG_DISABLE_BGT is not set
-# CONFIG_MTD_UBI_DEBUG_USERSPACE_IO is not set
# CONFIG_MTD_UBI_DEBUG_EMULATE_BITFLIPS is not set
# CONFIG_MTD_UBI_DEBUG_EMULATE_WRITE_FAILURES is not set
# CONFIG_MTD_UBI_DEBUG_EMULATE_ERASE_FAILURES is not set
# CONFIG_MTD_UBI_DEBUG_MSG_IO is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
CONFIG_NETDEV_1000=y
+CONFIG_FSL_PQ_MDIO=y
# CONFIG_GIANFAR is not set
CONFIG_UCC_GETH=y
# CONFIG_UGETH_MAGIC_PACKET is not set
-# CONFIG_UGETH_FILTERING is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
# CONFIG_MV643XX_ETH is not set
# CONFIG_NETDEV_10000 is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
CONFIG_WAN=y
CONFIG_HDLC=y
# CONFIG_HDLC_RAW is not set
#
# X.25/LAPB support is disabled
#
-CONFIG_HDLC_KM=y
-CONFIG_FS_UCC_HDLC=y
# CONFIG_DLCI is not set
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_QE is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
-CONFIG_BOOTCOUNT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
# CONFIG_UIO_PDRV is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
# CONFIG_UIO_SMX is not set
# CONFIG_UIO_SERCOS3 is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_UBIFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_DLM is not set
CONFIG_UCC_FAST=y
CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
+CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_VIRQ_DEBUG is not set
# CONFIG_BOOTX_TEXT is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:06 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:04 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_MPC837x_RDB is not set
# CONFIG_SBC834x is not set
# CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
CONFIG_PPC_MPC831x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=y
-CONFIG_SPI_MPC83xx=y
+# CONFIG_SPI_MPC8xxx is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_PXA25X is not set
# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_USB_GADGET_FSL_QE is not set
CONFIG_USB_GADGET_NET2280=y
CONFIG_USB_NET2280=y
# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=y
CONFIG_USB_ETH_RNDIS=y
# CONFIG_USB_GADGETFS is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
# CONFIG_BINARY_PRINTF is not set
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:06 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:05 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_MPC837x_RDB is not set
# CONFIG_SBC834x is not set
# CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
CONFIG_PPC_MPC831x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=y
-CONFIG_SPI_MPC83xx=y
+# CONFIG_SPI_MPC8xxx is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_PXA25X is not set
# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_USB_GADGET_FSL_QE is not set
CONFIG_USB_GADGET_NET2280=y
CONFIG_USB_NET2280=y
# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=y
CONFIG_USB_ETH_RNDIS=y
# CONFIG_USB_GADGETFS is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
# CONFIG_BINARY_PRINTF is not set
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:07 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:06 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_MPC837x_RDB is not set
# CONFIG_SBC834x is not set
# CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
CONFIG_PPC_MPC832x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
# CONFIG_GIANFAR is not set
CONFIG_UCC_GETH=y
# CONFIG_UGETH_MAGIC_PACKET is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:08 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:07 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_MPC837x_RDB is not set
# CONFIG_SBC834x is not set
# CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
CONFIG_PPC_MPC832x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
# CONFIG_GIANFAR is not set
CONFIG_UCC_GETH=y
# CONFIG_UGETH_MAGIC_PACKET is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=y
-CONFIG_SPI_MPC83xx=y
+# CONFIG_SPI_MPC8xxx is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not set
CONFIG_MMC_SPI=y
+# CONFIG_MMC_CB710 is not set
+# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:09 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:07 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_MPC837x_RDB is not set
# CONFIG_SBC834x is not set
# CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
CONFIG_PPC_MPC834x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
CONFIG_SENSORS_PCF8574=y
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=y
-CONFIG_SPI_MPC83xx=y
+# CONFIG_SPI_MPC8xxx is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:10 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:08 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_MPC837x_RDB is not set
# CONFIG_SBC834x is not set
# CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
CONFIG_PPC_MPC834x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
CONFIG_SENSORS_PCF8574=y
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=y
-CONFIG_SPI_MPC83xx=y
+# CONFIG_SPI_MPC8xxx is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:11 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:09 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_MPC837x_RDB is not set
# CONFIG_SBC834x is not set
# CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
CONFIG_PPC_MPC834x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:12 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:10 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_MPC837x_RDB is not set
# CONFIG_SBC834x is not set
# CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_AMIGAONE is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
# CONFIG_GIANFAR is not set
CONFIG_UCC_GETH=y
# CONFIG_UGETH_MAGIC_PACKET is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:13 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:12 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_MPC837x_RDB is not set
# CONFIG_SBC834x is not set
# CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_AMIGAONE is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
# CONFIG_GIANFAR is not set
CONFIG_UCC_GETH=y
# CONFIG_UGETH_MAGIC_PACKET is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_GPIO is not set
-CONFIG_SPI_MPC83xx=y
+# CONFIG_SPI_MPC8xxx is not set
#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=y
# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:12 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:11 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_MPC837x_RDB is not set
# CONFIG_SBC834x is not set
# CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
CONFIG_PPC_MPC837x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:14 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:13 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_MPC837x_RDB=y
# CONFIG_SBC834x is not set
# CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
CONFIG_PPC_MPC837x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
# CONFIG_BINARY_PRINTF is not set
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:15 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:13 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_MPC837x_RDB is not set
CONFIG_SBC834x=y
# CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
CONFIG_PPC_MPC834x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:16 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:14 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
CONFIG_PPC_85xx=y
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_MPC85xx_DS is not set
# CONFIG_SOCRATES is not set
CONFIG_KSI8560=y
+# CONFIG_XES_MPC85xx is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
CONFIG_BINFMT_MISC=y
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
CONFIG_FS_ENET=y
# CONFIG_FS_ENET_HAS_SCC is not set
CONFIG_FS_ENET_HAS_FCC=y
CONFIG_NETDEV_1000=y
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
CONFIG_NETDEV_10000=y
#
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:17 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:15 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
CONFIG_PPC_85xx=y
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_MPC85xx_DS is not set
# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
CONFIG_BINFMT_MISC=y
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
CONFIG_NETDEV_1000=y
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
CONFIG_NETDEV_10000=y
#
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:17 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:16 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
CONFIG_PPC_85xx=y
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_MPC85xx_DS is not set
# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
CONFIG_BINFMT_MISC=y
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_FS_ENET=y
# CONFIG_FS_ENET_HAS_SCC is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:18 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:17 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
CONFIG_PPC_85xx=y
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_MPC85xx_DS is not set
# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
CONFIG_BINFMT_MISC=y
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:19 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:18 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
CONFIG_PPC_85xx=y
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_MPC85xx_DS is not set
# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
CONFIG_BINFMT_MISC=y
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:20 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:19 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
CONFIG_PPC_85xx=y
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_MPC85xx_DS is not set
# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
CONFIG_BINFMT_MISC=y
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
CONFIG_NETDEV_1000=y
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
CONFIG_NETDEV_10000=y
#
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:21 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:19 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
CONFIG_PPC_85xx=y
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_MPC85xx_DS is not set
CONFIG_SOCRATES=y
# CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CAN Device Drivers
#
# CONFIG_CAN_VCAN is not set
+# CONFIG_CAN_DEV is not set
# CONFIG_CAN_DEBUG_DEVICES is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
# CONFIG_INPUT_MISC is not set
#
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# SPI Master Controller Drivers
#
# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_MPC8xxx is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CYPRESS is not set
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
# CONFIG_BINARY_PRINTF is not set
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:22 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:20 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
CONFIG_PPC_85xx=y
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_MPC85xx_DS is not set
# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
CONFIG_STX_GP3=y
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
CONFIG_BINFMT_MISC=m
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=m
+CONFIG_OF_MDIO=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_PC_FIFO is not set
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_NET_POCKET is not set
# CONFIG_ATL2 is not set
# CONFIG_FS_ENET is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CPM is not set
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_MPC is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:23 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:21 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
CONFIG_PPC_85xx=y
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_MPC85xx_DS is not set
# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
# CONFIG_STX_GP3 is not set
CONFIG_TQM8540=y
# CONFIG_TQM8541 is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:23 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:22 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
CONFIG_PPC_85xx=y
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_MPC85xx_DS is not set
# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
CONFIG_TQM8541=y
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CPM is not set
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:24 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:23 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
CONFIG_PPC_85xx=y
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_MPC85xx_DS is not set
# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
CONFIG_BINFMT_MISC=y
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:25 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:24 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
CONFIG_PPC_85xx=y
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_MPC85xx_DS is not set
# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CPM is not set
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:26 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:25 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
CONFIG_PPC_85xx=y
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_MPC85xx_DS is not set
# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CPM is not set
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc6
-# Thu Jun 11 11:25:17 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:25 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
CONFIG_PPC_85xx=y
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CYPRESS is not set
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_GPIO_PLATFORM=y
CONFIG_LEDS_GPIO_OF=y
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
CONFIG_LEDS_PCA955X=y
# CONFIG_LEDS_BD2802 is not set
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_MPC85XX=y
-# CONFIG_EDAC_AMD8131 is not set
-# CONFIG_EDAC_AMD8111 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_DMATEST is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:31 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:31 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_PHYS_64BIT is not set
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_PPC32=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_LOCKBREAK=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_GENERIC_TBSYNC=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Kernel options
#
-# CONFIG_HIGHMEM is not set
+CONFIG_HIGHMEM=y
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
-CONFIG_PCI_DEBUG=y
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+# CONFIG_PCMCIA_LOAD_CIS is not set
+# CONFIG_PCMCIA_IOCTL is not set
+# CONFIG_CARDBUS is not set
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=y
+# CONFIG_YENTA_O2 is not set
+# CONFIG_YENTA_RICOH is not set
+CONFIG_YENTA_TI=y
+# CONFIG_YENTA_TOSHIBA is not set
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+CONFIG_PCCARD_NONSTATIC=y
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_HL is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-CONFIG_NETFILTER_XT_MATCH_HL=m
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-# CONFIG_IP_NF_MATCH_AH is not set
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_ECN=m
-# CONFIG_IP_NF_TARGET_TTL is not set
-CONFIG_IP_NF_RAW=m
-# CONFIG_IP_NF_SECURITY is not set
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_AH is not set
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-# CONFIG_IP6_NF_MATCH_MH is not set
-CONFIG_IP6_NF_MATCH_RT=m
-# CONFIG_IP6_NF_TARGET_HL is not set
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-# CONFIG_IP6_NF_TARGET_REJECT is not set
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-# CONFIG_IP6_NF_SECURITY is not set
-# CONFIG_BRIDGE_NF_EBTABLES is not set
+# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-CONFIG_TIPC=m
-# CONFIG_TIPC_ADVANCED is not set
-# CONFIG_TIPC_DEBUG is not set
-CONFIG_ATM=m
-CONFIG_ATM_CLIP=m
-# CONFIG_ATM_CLIP_NO_ICMP is not set
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
-CONFIG_STP=m
-CONFIG_BRIDGE=m
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
-CONFIG_VLAN_8021Q=m
-# CONFIG_VLAN_8021Q_GVRP is not set
+# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
-CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
-CONFIG_WAN_ROUTER=m
+# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
-CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m
-# CONFIG_NET_SCH_MULTIQ is not set
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-# CONFIG_NET_SCH_DRR is not set
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-# CONFIG_NET_CLS_BASIC is not set
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CLS_U32_MARK is not set
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_SCH_FIFO=y
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
#
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
#
# SCSI device support
# CONFIG_BLK_DEV_SR_VENDOR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
+# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
-CONFIG_ATM_DRIVERS=y
-# CONFIG_ATM_DUMMY is not set
-# CONFIG_ATM_TCP is not set
-# CONFIG_ATM_LANAI is not set
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_ZATM is not set
-# CONFIG_ATM_NICSTAR is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_FORE200E is not set
-# CONFIG_ATM_HE is not set
-# CONFIG_ATM_SOLOS is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
-CONFIG_PPPOATM=m
# CONFIG_PPPOL2TP is not set
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
# Input device support
#
CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_PCI is not set
+# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
+CONFIG_GPIO_SYSFS=y
#
# Memory mapped GPIO expanders:
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
-# CONFIG_USB_ATM is not set
# CONFIG_USB_GADGET is not set
#
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
CONFIG_RTC_DRV_RX8581=y
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
#
# CD-ROM/DVD Filesystems
#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_FAT_DEFAULT_CODEPAGE=850
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_NTFS_FS is not set
#
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
+CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
+CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
# Security options
#
# CONFIG_KEYS is not set
-CONFIG_SECURITY=y
+# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-CONFIG_SECURITY_NETWORK=y
-# CONFIG_SECURITY_NETWORK_XFRM is not set
-# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
-# CONFIG_SECURITY_TOMOYO is not set
CONFIG_CRYPTO=y
#
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
-CONFIG_CRYPTO_TEST=m
+# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
-CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_HMAC=m
# CONFIG_CRYPTO_XCBC is not set
#
# Digest
#
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_WP512=m
+# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:29 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:29 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_PHYS_64BIT is not set
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_PPC32=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_LOCKBREAK=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_GENERIC_TBSYNC=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_FREEZER is not set
-CONFIG_PPC_MSI_BITMAP=y
#
# Platform support
#
# Kernel options
#
-# CONFIG_HIGHMEM is not set
+CONFIG_HIGHMEM=y
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
-CONFIG_PCI_MSI=y
+# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+# CONFIG_PCMCIA_LOAD_CIS is not set
+# CONFIG_PCMCIA_IOCTL is not set
+# CONFIG_CARDBUS is not set
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=y
+# CONFIG_YENTA_O2 is not set
+# CONFIG_YENTA_RICOH is not set
+CONFIG_YENTA_TI=y
+# CONFIG_YENTA_TOSHIBA is not set
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+CONFIG_PCCARD_NONSTATIC=y
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
#
# SCSI device support
# CONFIG_BLK_DEV_SR_VENDOR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
+# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_PCI is not set
+# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
CONFIG_RTC_DRV_RX8581=y
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:30 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:30 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_PHYS_64BIT is not set
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_PPC32=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_LOCKBREAK=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_GENERIC_TBSYNC=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_SR_VENDOR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
CONFIG_RTC_DRV_RX8581=y
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
# CONFIG_SECURITY_TOMOYO is not set
CONFIG_CRYPTO=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:28 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:27 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_PHYS_64BIT is not set
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:28 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:28 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_PHYS_64BIT is not set
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_PPC32=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_GENERIC_TBSYNC=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
-# CONFIG_IOMMU_HELPER is not set
+CONFIG_IOMMU_HELPER=y
+CONFIG_SWIOTLB=y
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
#
# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported SDMC DM1105 Adapters
-#
-# CONFIG_DVB_DM1105 is not set
-
-#
-# Supported DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
CONFIG_SND_INTEL8X0=y
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:27 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:26 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_PHYS_64BIT is not set
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_PPC32=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_LOCKBREAK=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_GENERIC_TBSYNC=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_MIRROR=y
+# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS_SECURITY is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_STATS=y
# CONFIG_OCFS2_DEBUG_FS is not set
# CONFIG_OCFS2_FS_POSIX_ACL is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
# CONFIG_SECURITY_TOMOYO is not set
CONFIG_CRYPTO=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:50 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:47 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
CONFIG_PPC_8xx=y
# CONFIG_40x is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_REDBOOT=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_8XX_MINIMAL_FPEMU is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
CONFIG_FS_ENET=y
# CONFIG_FS_ENET_HAS_SCC is not set
CONFIG_FS_ENET_HAS_FEC=y
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:51 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:48 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_CHECK_CACHE_COHERENCY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
+CONFIG_MARKERS=y
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=m
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_ACARD=m
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
CONFIG_SCSI_ARCMSR=m
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_MV643XX_ETH=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
CONFIG_SENSORS_PCF8574=m
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_SENSORS_SMSC47B397=m
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
CONFIG_SENSORS_VIA686A=m
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
-CONFIG_WDT_501_PCI=y
#
# USB-based Watchdog Cards
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
#
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:52 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:49 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
#
#
-# A new alternative FireWire stack is available with EXPERIMENTAL=y
+# You can enable one or both FireWire driver stacks.
#
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_FS_ENET=y
# CONFIG_FS_ENET_HAS_SCC is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
# CONFIG_FSL_PQ_MDIO is not set
# CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_JME is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:53 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:49 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
CONFIG_PPC_8xx=y
# CONFIG_40x is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_8XX_MINIMAL_FPEMU=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
CONFIG_FS_ENET=y
# CONFIG_FS_ENET_HAS_SCC is not set
CONFIG_FS_ENET_HAS_FEC=y
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:54 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:50 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_LEGACY=m
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
# CONFIG_FSL_PQ_MDIO is not set
# CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
+CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:55 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:51 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_HIBERNATE_32=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
#
#
-# A new alternative FireWire stack is available with EXPERIMENTAL=y
+# You can enable one or both FireWire driver stacks.
#
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_FS_ENET=y
CONFIG_FS_ENET_HAS_SCC=y
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:55 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:52 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
CONFIG_PPC_8xx=y
# CONFIG_40x is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_PPC_UDBG_16550 is not set
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
# CONFIG_BUG is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
CONFIG_FS_ENET=y
CONFIG_FS_ENET_HAS_SCC=y
# CONFIG_FS_ENET_HAS_FEC is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_VIRQ_DEBUG is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:56 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:53 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_TSI108_ETH=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:57 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:54 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
#
#
-# A new alternative FireWire stack is available with EXPERIMENTAL=y
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
+# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_FS_ENET=y
# CONFIG_FS_ENET_HAS_SCC is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
# CONFIG_FSL_PQ_MDIO is not set
# CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_JME is not set
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:58 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:55 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
CONFIG_REDBOOT=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_MPC837x_RDB=y
CONFIG_SBC834x=y
CONFIG_ASP834x=y
+# CONFIG_KMETER1 is not set
CONFIG_PPC_MPC831x=y
CONFIG_PPC_MPC832x=y
CONFIG_PPC_MPC834x=y
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
CONFIG_UCC_GETH=y
# CONFIG_UGETH_MAGIC_PACKET is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
CONFIG_UCC_FAST=y
CONFIG_UCC=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Tue Apr 21 15:40:23 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:55 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
CONFIG_PPC_85xx=y
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_MPC85xx_DS=y
CONFIG_SOCRATES=y
CONFIG_KSI8560=y
+# CONFIG_XES_MPC85xx is not set
CONFIG_STX_GP3=y
CONFIG_TQM8540=y
CONFIG_TQM8541=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
+CONFIG_IOMMU_HELPER=y
+CONFIG_SWIOTLB=y
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
+CONFIG_HAS_RAPIDIO=y
+# CONFIG_RAPIDIO is not set
#
# Advanced setup
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
#
# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_FS_ENET=y
CONFIG_FS_ENET_HAS_SCC=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
CONFIG_UCC_GETH=y
# CONFIG_UGETH_MAGIC_PACKET is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_CPM=m
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported SDMC DM1105 Adapters
-#
-# CONFIG_DVB_DM1105 is not set
-
-#
-# Supported DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
CONFIG_SND_INTEL8X0=y
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_MPC85XX=y
-# CONFIG_EDAC_AMD8131 is not set
-# CONFIG_EDAC_AMD8111 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_DMATEST is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Tue Apr 21 15:41:18 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:56 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
CONFIG_PPC_85xx=y
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_GENERIC_TBSYNC=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_MPC85xx_DS=y
CONFIG_SOCRATES=y
CONFIG_KSI8560=y
+# CONFIG_XES_MPC85xx is not set
CONFIG_STX_GP3=y
CONFIG_TQM8540=y
CONFIG_TQM8541=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
+CONFIG_IOMMU_HELPER=y
+CONFIG_SWIOTLB=y
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
+CONFIG_HAS_RAPIDIO=y
+# CONFIG_RAPIDIO is not set
#
# Advanced setup
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
#
# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_FS_ENET=y
CONFIG_FS_ENET_HAS_SCC=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
CONFIG_UCC_GETH=y
# CONFIG_UGETH_MAGIC_PACKET is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_CPM=m
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported SDMC DM1105 Adapters
-#
-# CONFIG_DVB_DM1105 is not set
-
-#
-# Supported DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
CONFIG_SND_INTEL8X0=y
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_MPC85XX=y
-# CONFIG_EDAC_AMD8131 is not set
-# CONFIG_EDAC_AMD8111 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_DMATEST is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:00 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:57 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
CONFIG_PPC_8xx=y
# CONFIG_40x is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_PPC_UDBG_16550 is not set
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
# CONFIG_BUG is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
CONFIG_FS_ENET=y
CONFIG_FS_ENET_HAS_SCC=y
CONFIG_FS_ENET_HAS_FEC=y
CONFIG_NETDEV_1000=y
# CONFIG_FSL_PQ_MDIO is not set
# CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
CONFIG_NETDEV_10000=y
#
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:00 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:58 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_PHYS_64BIT is not set
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_PPC32=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_GENERIC_TBSYNC=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
-# CONFIG_IOMMU_HELPER is not set
+CONFIG_IOMMU_HELPER=y
+CONFIG_SWIOTLB=y
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
#
# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported SDMC DM1105 Adapters
-#
-# CONFIG_DVB_DM1105 is not set
-
-#
-# Supported DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
CONFIG_SND_INTEL8X0=y
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:01 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:59 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
CONFIG_PPC_8xx=y
# CONFIG_40x is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_8XX_MINIMAL_FPEMU=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
CONFIG_FS_ENET=y
# CONFIG_FS_ENET_HAS_SCC is not set
CONFIG_FS_ENET_HAS_FEC=y
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:02 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:00 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
#
-# A new alternative FireWire stack is available with EXPERIMENTAL=y
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
+# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_FS_ENET=y
# CONFIG_FS_ENET_HAS_SCC is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
# CONFIG_FSL_PQ_MDIO is not set
# CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_JME is not set
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_PXA25X is not set
# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
CONFIG_USB_GADGET_M66592=y
CONFIG_USB_M66592=y
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_USB_GADGET_CI13XXX is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=y
CONFIG_USB_ETH_RNDIS=y
# CONFIG_USB_GADGETFS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:03 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:01 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_CHECK_CACHE_COHERENCY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_MAC_EMUMOUSEBTN is not set
# CONFIG_WINDFARM is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_MV643XX_ETH=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=y
+# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
CONFIG_THRUSTMASTER_FF=y
+CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
# CONFIG_BINARY_PRINTF is not set
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc5
-# Fri May 15 10:37:00 2009
+# Linux kernel version: 2.6.31-rc7
+# Mon Aug 24 17:38:50 2009
#
CONFIG_PPC64=y
#
# Processor support
#
+CONFIG_PPC_BOOK3S_64=y
CONFIG_PPC_BOOK3S=y
# CONFIG_POWER4_ONLY is not set
CONFIG_POWER3=y
CONFIG_PPC_STD_MMU_64=y
CONFIG_PPC_MM_SLICES=y
CONFIG_VIRT_CPU_ACCOUNTING=y
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_64BIT=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_ARCH_HAS_ILOG2_U64=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_PPC=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
#
# Cell Broadband Engine options
#
-CONFIG_SPU_FS=y
+CONFIG_SPU_FS=m
CONFIG_SPU_FS_64K_LS=y
# CONFIG_SPU_TRACE is not set
CONFIG_SPU_BASE=y
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
# CONFIG_IOMMU_VMERGE is not set
CONFIG_IOMMU_HELPER=y
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_PPC_HAS_HASH_64K=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=m
+CONFIG_MAC80211_DEFAULT_PS=y
+CONFIG_MAC80211_DEFAULT_PS_VALUE=1
#
# Rate control algorithm selection
CONFIG_MAC80211_RC_DEFAULT_PID=y
# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT="pid"
-# CONFIG_MAC80211_MESH is not set
# CONFIG_MAC80211_LEDS is not set
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-# CONFIG_MTD_TESTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
+# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
CONFIG_NETDEV_1000=y
CONFIG_GELIC_NET=y
CONFIG_GELIC_WIRELESS=y
-CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE=y
+# CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE is not set
# CONFIG_NETDEV_10000 is not set
#
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
-CONFIG_ZD1211RW=m
-# CONFIG_ZD1211RW_DEBUG is not set
+# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set
#
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
-CONFIG_USB_PEGASUS=m
+# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
# CONFIG_USB_NET_GL620A is not set
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_NET_PLUSB is not set
-CONFIG_USB_NET_MCS7830=m
+# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
# CONFIG_USB_NET_ZAURUS is not set
+# CONFIG_USB_NET_INT51X1 is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
#
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_LEGACY_PTYS is not set
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
# CONFIG_SND_DRIVERS is not set
CONFIG_SND_PPC=y
CONFIG_SND_PS3=m
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CYPRESS is not set
-# CONFIG_DRAGONRISE_FF is not set
-# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_DRAGONRISE is not set
+CONFIG_HID_EZKEY=m
# CONFIG_HID_KYE is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
+CONFIG_HID_LOGITECH=m
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=m
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_SAMSUNG is not set
CONFIG_HID_SONY=m
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SUNPLUS=m
+# CONFIG_HID_GREENASIA is not set
+CONFIG_HID_SMARTJOYPLUS=m
+# CONFIG_SMARTJOYPLUS_FF is not set
# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_WACOM is not set
+# CONFIG_HID_ZEROPLUS is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FTRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:04 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:01 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
# CONFIG_FSL_PQ_MDIO is not set
# CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
#endif
}
+static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
+{
+ struct dma_mapping_ops *ops = get_dma_ops(dev);
+
+ if (ops->addr_needs_map && ops->addr_needs_map(dev, addr, size))
+ return 0;
+
+ if (!dev->dma_mask)
+ return 0;
+
+ return addr + size <= *dev->dma_mask;
+}
+
+static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+ return paddr + get_dma_direct_offset(dev);
+}
+
+static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
+{
+ return daddr - get_dma_direct_offset(dev);
+}
+
#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
#ifdef CONFIG_NOT_COHERENT_CACHE
#define KVM_COALESCED_MMIO_PAGE_OFFSET 1
/* We don't currently support large pages. */
-#define KVM_PAGES_PER_HPAGE (1<<31)
+#define KVM_PAGES_PER_HPAGE (1UL << 31)
struct kvm;
struct kvm_run;
*/
/* #define pmd_alloc_one(mm,address) ({ BUG(); ((pmd_t *)2); }) */
#define pmd_free(mm, x) do { } while (0)
-#define __pmd_free_tlb(tlb,x) do { } while (0)
+#define __pmd_free_tlb(tlb,x,a) do { } while (0)
/* #define pgd_populate(mm, pmd, pte) BUG() */
#ifndef CONFIG_BOOKE
kmem_cache_free(pgtable_cache[cachenum], p);
}
-#define __pmd_free_tlb(tlb, pmd) \
+#define __pmd_free_tlb(tlb, pmd,addr) \
pgtable_free_tlb(tlb, pgtable_free_cache(pmd, \
PMD_CACHE_NUM, PMD_TABLE_SIZE-1))
#ifndef CONFIG_PPC_64K_PAGES
-#define __pud_free_tlb(tlb, pud) \
+#define __pud_free_tlb(tlb, pud, addr) \
pgtable_free_tlb(tlb, pgtable_free_cache(pud, \
PUD_CACHE_NUM, PUD_TABLE_SIZE-1))
#endif /* CONFIG_PPC_64K_PAGES */
extern void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf);
#ifdef CONFIG_SMP
-#define __pte_free_tlb(tlb,ptepage) \
+#define __pte_free_tlb(tlb,ptepage,address) \
do { \
pgtable_page_dtor(ptepage); \
pgtable_free_tlb(tlb, pgtable_free_cache(page_address(ptepage), \
- PTE_NONCACHE_NUM, PTE_TABLE_SIZE-1)); \
+ PTE_NONCACHE_NUM, PTE_TABLE_SIZE-1)); \
} while (0)
#else
-#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, (pte))
+#define __pte_free_tlb(tlb, pte, address) pte_free((tlb)->mm, (pte))
#endif
* This returns the old value in the lock, so we succeeded
* in getting the lock if the return value is 0.
*/
-static inline unsigned long __spin_trylock(raw_spinlock_t *lock)
+static inline unsigned long arch_spin_trylock(raw_spinlock_t *lock)
{
unsigned long tmp, token;
static inline int __raw_spin_trylock(raw_spinlock_t *lock)
{
CLEAR_IO_SYNC;
- return __spin_trylock(lock) == 0;
+ return arch_spin_trylock(lock) == 0;
}
/*
{
CLEAR_IO_SYNC;
while (1) {
- if (likely(__spin_trylock(lock) == 0))
+ if (likely(arch_spin_trylock(lock) == 0))
break;
do {
HMT_low();
CLEAR_IO_SYNC;
while (1) {
- if (likely(__spin_trylock(lock) == 0))
+ if (likely(arch_spin_trylock(lock) == 0))
break;
local_save_flags(flags_dis);
local_irq_restore(flags);
* This returns the old value in the lock + 1,
* so we got a read lock if the return value is > 0.
*/
-static inline long __read_trylock(raw_rwlock_t *rw)
+static inline long arch_read_trylock(raw_rwlock_t *rw)
{
long tmp;
* This returns the old value in the lock,
* so we got the write lock if the return value is 0.
*/
-static inline long __write_trylock(raw_rwlock_t *rw)
+static inline long arch_write_trylock(raw_rwlock_t *rw)
{
long tmp, token;
static inline void __raw_read_lock(raw_rwlock_t *rw)
{
while (1) {
- if (likely(__read_trylock(rw) > 0))
+ if (likely(arch_read_trylock(rw) > 0))
break;
do {
HMT_low();
static inline void __raw_write_lock(raw_rwlock_t *rw)
{
while (1) {
- if (likely(__write_trylock(rw) == 0))
+ if (likely(arch_write_trylock(rw) == 0))
break;
do {
HMT_low();
static inline int __raw_read_trylock(raw_rwlock_t *rw)
{
- return __read_trylock(rw) > 0;
+ return arch_read_trylock(rw) > 0;
}
static inline int __raw_write_trylock(raw_rwlock_t *rw)
{
- return __write_trylock(rw) == 0;
+ return arch_write_trylock(rw) == 0;
}
static inline void __raw_read_unlock(raw_rwlock_t *rw)
int swiotlb __read_mostly;
unsigned int ppc_swiotlb_enable;
-void *swiotlb_bus_to_virt(struct device *hwdev, dma_addr_t addr)
-{
- unsigned long pfn = PFN_DOWN(swiotlb_bus_to_phys(hwdev, addr));
- void *pageaddr = page_address(pfn_to_page(pfn));
-
- if (pageaddr != NULL)
- return pageaddr + (addr % PAGE_SIZE);
- return NULL;
-}
-
-dma_addr_t swiotlb_phys_to_bus(struct device *hwdev, phys_addr_t paddr)
-{
- return paddr + get_dma_direct_offset(hwdev);
-}
-
-phys_addr_t swiotlb_bus_to_phys(struct device *hwdev, dma_addr_t baddr)
-
-{
- return baddr - get_dma_direct_offset(hwdev);
-}
-
-/*
- * Determine if an address needs bounce buffering via swiotlb.
- * Going forward I expect the swiotlb code to generalize on using
- * a dma_ops->addr_needs_map, and this function will move from here to the
- * generic swiotlb code.
- */
-int
-swiotlb_arch_address_needs_mapping(struct device *hwdev, dma_addr_t addr,
- size_t size)
-{
- struct dma_mapping_ops *dma_ops = get_dma_ops(hwdev);
-
- BUG_ON(!dma_ops);
- return dma_ops->addr_needs_map(hwdev, addr, size);
-}
-
/*
* Determine if an address is reachable by a pci device, or if we must bounce.
*/
static int
swiotlb_pci_addr_needs_map(struct device *hwdev, dma_addr_t addr, size_t size)
{
- u64 mask = dma_get_mask(hwdev);
dma_addr_t max;
struct pci_controller *hose;
struct pci_dev *pdev = to_pci_dev(hwdev);
if ((addr + size > max) | (addr < hose->dma_window_base_cur))
return 1;
- return !is_buffer_dma_capable(mask, addr, size);
-}
-
-static int
-swiotlb_addr_needs_map(struct device *hwdev, dma_addr_t addr, size_t size)
-{
- return !is_buffer_dma_capable(dma_get_mask(hwdev), addr, size);
+ return 0;
}
-
/*
* At the moment, all platforms that use this code only require
* swiotlb to be used if we're operating on HIGHMEM. Since
.dma_supported = swiotlb_dma_supported,
.map_page = swiotlb_map_page,
.unmap_page = swiotlb_unmap_page,
- .addr_needs_map = swiotlb_addr_needs_map,
.sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu,
.sync_single_range_for_device = swiotlb_sync_single_range_for_device,
.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
#include <linux/device.h>
#include <linux/dma-mapping.h>
+#include <linux/lmb.h>
#include <asm/bug.h>
#include <asm/abs_addr.h>
static int dma_direct_dma_supported(struct device *dev, u64 mask)
{
#ifdef CONFIG_PPC64
- /* Could be improved to check for memory though it better be
- * done via some global so platforms can set the limit in case
+ /* Could be improved so platforms can set the limit in case
* they have limited DMA windows
*/
- return mask >= DMA_BIT_MASK(32);
+ return mask >= (lmb_end_of_DRAM() - 1);
#else
return 1;
#endif
static int init_mpc7450_pmu(void)
{
- if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc/7450"))
+ if (!cur_cpu_spec->oprofile_cpu_type ||
+ strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc/7450"))
return -ENODEV;
return register_power_pmu(&mpc7450_pmu);
struct cpu_hw_counters *cpuhw;
unsigned long flags;
+ if (!ppmu)
+ return;
local_irq_save(flags);
cpuhw = &__get_cpu_var(cpu_hw_counters);
int n_lim;
int idx;
+ if (!ppmu)
+ return;
local_irq_save(flags);
cpuhw = &__get_cpu_var(cpu_hw_counters);
if (!cpuhw->disabled) {
long i, n, n0;
struct perf_counter *sub;
+ if (!ppmu)
+ return 0;
cpuhw = &__get_cpu_var(cpu_hw_counters);
n0 = cpuhw->n_counters;
n = collect_events(group_leader, ppmu->n_counter - n0,
{
struct cpu_hw_counters *cpuhw = &per_cpu(cpu_hw_counters, cpu);
+ if (!ppmu)
+ return;
memset(cpuhw, 0, sizeof(*cpuhw));
cpuhw->mmcr[0] = MMCR0_FC;
}
static int init_power4_pmu(void)
{
- if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power4"))
+ if (!cur_cpu_spec->oprofile_cpu_type ||
+ strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power4"))
return -ENODEV;
return register_power_pmu(&power4_pmu);
static int init_power5p_pmu(void)
{
- if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5+")
- && strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5++"))
+ if (!cur_cpu_spec->oprofile_cpu_type ||
+ (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5+")
+ && strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5++")))
return -ENODEV;
return register_power_pmu(&power5p_pmu);
static int init_power5_pmu(void)
{
- if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5"))
+ if (!cur_cpu_spec->oprofile_cpu_type ||
+ strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5"))
return -ENODEV;
return register_power_pmu(&power5_pmu);
static int init_power6_pmu(void)
{
- if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power6"))
+ if (!cur_cpu_spec->oprofile_cpu_type ||
+ strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power6"))
return -ENODEV;
return register_power_pmu(&power6_pmu);
*/
static int power7_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
[C(L1D)] = { /* RESULT_ACCESS RESULT_MISS */
- [C(OP_READ)] = { 0x400f0, 0xc880 },
+ [C(OP_READ)] = { 0xc880, 0x400f0 },
[C(OP_WRITE)] = { 0, 0x300f0 },
[C(OP_PREFETCH)] = { 0xd8b8, 0 },
},
[C(OP_PREFETCH)] = { 0x408a, 0 },
},
[C(LL)] = { /* RESULT_ACCESS RESULT_MISS */
- [C(OP_READ)] = { 0x6080, 0x6084 },
- [C(OP_WRITE)] = { 0x6082, 0x6086 },
+ [C(OP_READ)] = { 0x16080, 0x26080 },
+ [C(OP_WRITE)] = { 0x16082, 0x26082 },
[C(OP_PREFETCH)] = { 0, 0 },
},
[C(DTLB)] = { /* RESULT_ACCESS RESULT_MISS */
static int init_power7_pmu(void)
{
- if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power7"))
+ if (!cur_cpu_spec->oprofile_cpu_type ||
+ strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power7"))
return -ENODEV;
return register_power_pmu(&power7_pmu);
static int init_ppc970_pmu(void)
{
- if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/970")
- && strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/970MP"))
+ if (!cur_cpu_spec->oprofile_cpu_type ||
+ (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/970")
+ && strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/970MP")))
return -ENODEV;
return register_power_pmu(&ppc970_pmu);
{
struct pt_regs *regs = task->thread.regs;
-
-#if defined(CONFIG_BOOKE)
- /* If DAC then do not single step, skip */
- if (task->thread.dabr)
- return;
-#endif
-
if (regs != NULL) {
-#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+#if defined(CONFIG_BOOKE)
+ /* If DAC don't clear DBCRO_IDM or MSR_DE */
+ if (task->thread.dabr)
+ task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_BT);
+ else {
+ task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_BT | DBCR0_IDM);
+ regs->msr &= ~MSR_DE;
+ }
+#elif defined(CONFIG_40x)
task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_BT | DBCR0_IDM);
regs->msr &= ~MSR_DE;
#else
mtvscr vr0
REST_32VRS(0,r4,r5)
#ifndef CONFIG_SMP
- /* Update last_task_used_math to 'current' */
+ /* Update last_task_used_altivec to 'current' */
subi r4,r5,THREAD /* Back to 'current' */
fromreal(r4)
- PPC_STL r4,ADDROFF(last_task_used_math)(r3)
+ PPC_STL r4,ADDROFF(last_task_used_altivec)(r3)
#endif /* CONFIG_SMP */
/* restore registers and return */
blr
oris r12,r12,MSR_VSX@h
std r12,_MSR(r1)
#ifndef CONFIG_SMP
- /* Update last_task_used_math to 'current' */
+ /* Update last_task_used_vsx to 'current' */
ld r4,PACACURRENT(r13)
std r4,0(r3)
#endif /* CONFIG_SMP */
pmd = pmd_offset(pud, start);
pud_clear(pud);
- pmd_free_tlb(tlb, pmd);
+ pmd_free_tlb(tlb, pmd, start);
}
static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
pud = pud_offset(pgd, start);
pgd_clear(pgd);
- pud_free_tlb(tlb, pud);
+ pud_free_tlb(tlb, pud, start);
}
/*
id = steal_context_smp(id);
if (id == MMU_NO_CONTEXT)
goto again;
+ goto stolen;
}
#endif /* CONFIG_SMP */
id = steal_context_up(id);
/* Turn UCC1 & UCC2 on */
setbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
setbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
+ } else if (machine_is(mpc8569_mds)) {
+#define BCSR7_UCC12_GETHnRST (0x1 << 2)
+#define BCSR8_UEM_MARVELL_RST (0x1 << 1)
+ /*
+ * U-Boot mangles interrupt polarity for Marvell PHYs,
+ * so reset built-in and UEM Marvell PHYs, this puts
+ * the PHYs into their normal state.
+ */
+ clrbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
+ setbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
+
+ setbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
+ clrbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
}
iounmap(bcsr_regs);
}
#include <linux/kernel.h>
#include <linux/platform_device.h>
+#include <asm/firmware.h>
#include <asm/rtc.h>
#include <asm/lv1call.h>
#include <asm/ps3.h>
{
struct platform_device *pdev;
+ if (!firmware_has_feature(FW_FEATURE_PS3_LV1))
+ return -ENODEV;
+
pdev = platform_device_register_simple("rtc-ps3", -1, NULL, 0);
if (IS_ERR(pdev))
return PTR_ERR(pdev);
generic_handle_irq(cascade_irq);
/* Let xilinx_intc end the interrupt */
- desc->chip->ack(irq);
desc->chip->unmask(irq);
}
select HAVE_ARCH_TRACEHOOK
select INIT_ALL_POSSIBLE
select HAVE_PERF_COUNTERS
- select GENERIC_ATOMIC64 if !64BIT
config SCHED_OMIT_FRAME_POINTER
bool
Select this option to enable the special message interface to
the cooperative memory management.
-config PAGE_STATES
- bool "Unused page notification"
- help
- This enables the notification of unused pages to the
- hypervisor. The ESSA instruction is used to do the states
- changes between a page that has content and the unused state.
-
config APPLDATA_BASE
bool "Linux - VM Monitor Stream, base infrastructure"
depends on PROC_FS
head-y := arch/s390/kernel/head.o arch/s390/kernel/init_task.o
core-y += arch/s390/mm/ arch/s390/kernel/ arch/s390/crypto/ \
- arch/s390/appldata/ arch/s390/hypfs/ arch/s390/kvm/ \
- arch/s390/power/
+ arch/s390/appldata/ arch/s390/hypfs/ arch/s390/kvm/
libs-y += arch/s390/lib/
drivers-y += drivers/s390/
const u8 *temp_key = key;
u32 *flags = &tfm->crt_flags;
- if (!(memcmp(key, &key[DES_KEY_SIZE], DES_KEY_SIZE))) {
- *flags |= CRYPTO_TFM_RES_BAD_KEY_SCHED;
+ if (!(memcmp(key, &key[DES_KEY_SIZE], DES_KEY_SIZE)) &&
+ (*flags & CRYPTO_TFM_REQ_WEAK_KEY)) {
+ *flags |= CRYPTO_TFM_RES_WEAK_KEY;
return -EINVAL;
}
for (i = 0; i < 2; i++, temp_key += DES_KEY_SIZE) {
if (!(memcmp(key, &key[DES_KEY_SIZE], DES_KEY_SIZE) &&
memcmp(&key[DES_KEY_SIZE], &key[DES_KEY_SIZE * 2],
- DES_KEY_SIZE))) {
-
- *flags |= CRYPTO_TFM_RES_BAD_KEY_SCHED;
+ DES_KEY_SIZE)) &&
+ (*flags & CRYPTO_TFM_REQ_WEAK_KEY)) {
+ *flags |= CRYPTO_TFM_RES_WEAK_KEY;
return -EINVAL;
}
for (i = 0; i < 3; i++, temp_key += DES_KEY_SIZE) {
return 0;
}
+static int sha1_export(struct shash_desc *desc, void *out)
+{
+ struct s390_sha_ctx *sctx = shash_desc_ctx(desc);
+ struct sha1_state *octx = out;
+
+ octx->count = sctx->count;
+ memcpy(octx->state, sctx->state, sizeof(octx->state));
+ memcpy(octx->buffer, sctx->buf, sizeof(octx->buffer));
+ return 0;
+}
+
+static int sha1_import(struct shash_desc *desc, const void *in)
+{
+ struct s390_sha_ctx *sctx = shash_desc_ctx(desc);
+ const struct sha1_state *ictx = in;
+
+ sctx->count = ictx->count;
+ memcpy(sctx->state, ictx->state, sizeof(ictx->state));
+ memcpy(sctx->buf, ictx->buffer, sizeof(ictx->buffer));
+ sctx->func = KIMD_SHA_1;
+ return 0;
+}
+
static struct shash_alg alg = {
.digestsize = SHA1_DIGEST_SIZE,
.init = sha1_init,
.update = s390_sha_update,
.final = s390_sha_final,
+ .export = sha1_export,
+ .import = sha1_import,
.descsize = sizeof(struct s390_sha_ctx),
+ .statesize = sizeof(struct sha1_state),
.base = {
.cra_name = "sha1",
.cra_driver_name= "sha1-s390",
return 0;
}
+static int sha256_export(struct shash_desc *desc, void *out)
+{
+ struct s390_sha_ctx *sctx = shash_desc_ctx(desc);
+ struct sha256_state *octx = out;
+
+ octx->count = sctx->count;
+ memcpy(octx->state, sctx->state, sizeof(octx->state));
+ memcpy(octx->buf, sctx->buf, sizeof(octx->buf));
+ return 0;
+}
+
+static int sha256_import(struct shash_desc *desc, const void *in)
+{
+ struct s390_sha_ctx *sctx = shash_desc_ctx(desc);
+ const struct sha256_state *ictx = in;
+
+ sctx->count = ictx->count;
+ memcpy(sctx->state, ictx->state, sizeof(ictx->state));
+ memcpy(sctx->buf, ictx->buf, sizeof(ictx->buf));
+ sctx->func = KIMD_SHA_256;
+ return 0;
+}
+
static struct shash_alg alg = {
.digestsize = SHA256_DIGEST_SIZE,
.init = sha256_init,
.update = s390_sha_update,
.final = s390_sha_final,
+ .export = sha256_export,
+ .import = sha256_import,
.descsize = sizeof(struct s390_sha_ctx),
+ .statesize = sizeof(struct sha256_state),
.base = {
.cra_name = "sha256",
.cra_driver_name= "sha256-s390",
*
*/
#include <crypto/internal/hash.h>
+#include <crypto/sha.h>
+#include <linux/errno.h>
#include <linux/init.h>
+#include <linux/kernel.h>
#include <linux/module.h>
#include "sha.h"
return 0;
}
+static int sha512_export(struct shash_desc *desc, void *out)
+{
+ struct s390_sha_ctx *sctx = shash_desc_ctx(desc);
+ struct sha512_state *octx = out;
+
+ octx->count[0] = sctx->count;
+ octx->count[1] = 0;
+ memcpy(octx->state, sctx->state, sizeof(octx->state));
+ memcpy(octx->buf, sctx->buf, sizeof(octx->buf));
+ return 0;
+}
+
+static int sha512_import(struct shash_desc *desc, const void *in)
+{
+ struct s390_sha_ctx *sctx = shash_desc_ctx(desc);
+ const struct sha512_state *ictx = in;
+
+ if (unlikely(ictx->count[1]))
+ return -ERANGE;
+ sctx->count = ictx->count[0];
+
+ memcpy(sctx->state, ictx->state, sizeof(ictx->state));
+ memcpy(sctx->buf, ictx->buf, sizeof(ictx->buf));
+ sctx->func = KIMD_SHA_512;
+ return 0;
+}
+
static struct shash_alg sha512_alg = {
.digestsize = SHA512_DIGEST_SIZE,
.init = sha512_init,
.update = s390_sha_update,
.final = s390_sha_final,
+ .export = sha512_export,
+ .import = sha512_import,
.descsize = sizeof(struct s390_sha_ctx),
+ .statesize = sizeof(struct sha512_state),
.base = {
.cra_name = "sha512",
.cra_driver_name= "sha512-s390",
.init = sha384_init,
.update = s390_sha_update,
.final = s390_sha_final,
+ .export = sha512_export,
+ .import = sha512_import,
.descsize = sizeof(struct s390_sha_ctx),
+ .statesize = sizeof(struct sha512_state),
.base = {
.cra_name = "sha384",
.cra_driver_name= "sha384-s390",
{
struct dentry *dentry;
struct inode *inode;
- struct qstr qname;
- qname.name = name;
- qname.len = strlen(name);
- qname.hash = full_name_hash(name, qname.len);
mutex_lock(&parent->d_inode->i_mutex);
dentry = lookup_one_len(name, parent, strlen(name));
if (IS_ERR(dentry)) {
char tmp[TMP_SIZE];
struct dentry *dentry;
- snprintf(tmp, TMP_SIZE, "%lld\n", (unsigned long long int)value);
+ snprintf(tmp, TMP_SIZE, "%llu\n", (unsigned long long int)value);
buffer = kstrdup(tmp, GFP_KERNEL);
if (!buffer)
return ERR_PTR(-ENOMEM);
#ifndef __ARCH_S390_ATOMIC__
#define __ARCH_S390_ATOMIC__
-#include <linux/compiler.h>
-#include <linux/types.h>
-
/*
- * include/asm-s390/atomic.h
+ * Copyright 1999,2009 IBM Corp.
+ * Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>,
+ * Denis Joseph Barrow,
+ * Arnd Bergmann <arndb@de.ibm.com>,
*
- * S390 version
- * Copyright (C) 1999-2005 IBM Deutschland Entwicklung GmbH, IBM Corporation
- * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
- * Denis Joseph Barrow,
- * Arnd Bergmann (arndb@de.ibm.com)
- *
- * Derived from "include/asm-i386/bitops.h"
- * Copyright (C) 1992, Linus Torvalds
+ * Atomic operations that C can't guarantee us.
+ * Useful for resource counting etc.
+ * s390 uses 'Compare And Swap' for atomicity in SMP enviroment.
*
*/
-/*
- * Atomic operations that C can't guarantee us. Useful for
- * resource counting etc..
- * S390 uses 'Compare And Swap' for atomicity in SMP enviroment
- */
+#include <linux/compiler.h>
+#include <linux/types.h>
#define ATOMIC_INIT(i) { (i) }
-#ifdef __KERNEL__
-
#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
#define __CS_LOOP(ptr, op_val, op_string) ({ \
barrier();
}
-static __inline__ int atomic_add_return(int i, atomic_t * v)
+static inline int atomic_add_return(int i, atomic_t *v)
{
return __CS_LOOP(v, i, "ar");
}
#define atomic_inc_return(_v) atomic_add_return(1, _v)
#define atomic_inc_and_test(_v) (atomic_add_return(1, _v) == 0)
-static __inline__ int atomic_sub_return(int i, atomic_t * v)
+static inline int atomic_sub_return(int i, atomic_t *v)
{
return __CS_LOOP(v, i, "sr");
}
#define atomic_dec_return(_v) atomic_sub_return(1, _v)
#define atomic_dec_and_test(_v) (atomic_sub_return(1, _v) == 0)
-static __inline__ void atomic_clear_mask(unsigned long mask, atomic_t * v)
+static inline void atomic_clear_mask(unsigned long mask, atomic_t *v)
{
- __CS_LOOP(v, ~mask, "nr");
+ __CS_LOOP(v, ~mask, "nr");
}
-static __inline__ void atomic_set_mask(unsigned long mask, atomic_t * v)
+static inline void atomic_set_mask(unsigned long mask, atomic_t *v)
{
- __CS_LOOP(v, mask, "or");
+ __CS_LOOP(v, mask, "or");
}
#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-static __inline__ int atomic_cmpxchg(atomic_t *v, int old, int new)
+static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
{
#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
asm volatile(
return old;
}
-static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
+static inline int atomic_add_unless(atomic_t *v, int a, int u)
{
int c, old;
c = atomic_read(v);
#undef __CS_LOOP
-#ifdef __s390x__
#define ATOMIC64_INIT(i) { (i) }
+#ifdef CONFIG_64BIT
+
#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
#define __CSG_LOOP(ptr, op_val, op_string) ({ \
: "=&d" (old_val), "=&d" (new_val), \
"=Q" (((atomic_t *)(ptr))->counter) \
: "d" (op_val), "Q" (((atomic_t *)(ptr))->counter) \
- : "cc", "memory" ); \
+ : "cc", "memory"); \
new_val; \
})
"=m" (((atomic_t *)(ptr))->counter) \
: "a" (ptr), "d" (op_val), \
"m" (((atomic_t *)(ptr))->counter) \
- : "cc", "memory" ); \
+ : "cc", "memory"); \
new_val; \
})
barrier();
}
-static __inline__ long long atomic64_add_return(long long i, atomic64_t * v)
+static inline long long atomic64_add_return(long long i, atomic64_t *v)
{
return __CSG_LOOP(v, i, "agr");
}
-#define atomic64_add(_i, _v) atomic64_add_return(_i, _v)
-#define atomic64_add_negative(_i, _v) (atomic64_add_return(_i, _v) < 0)
-#define atomic64_inc(_v) atomic64_add_return(1, _v)
-#define atomic64_inc_return(_v) atomic64_add_return(1, _v)
-#define atomic64_inc_and_test(_v) (atomic64_add_return(1, _v) == 0)
-static __inline__ long long atomic64_sub_return(long long i, atomic64_t * v)
+static inline long long atomic64_sub_return(long long i, atomic64_t *v)
{
return __CSG_LOOP(v, i, "sgr");
}
-#define atomic64_sub(_i, _v) atomic64_sub_return(_i, _v)
-#define atomic64_sub_and_test(_i, _v) (atomic64_sub_return(_i, _v) == 0)
-#define atomic64_dec(_v) atomic64_sub_return(1, _v)
-#define atomic64_dec_return(_v) atomic64_sub_return(1, _v)
-#define atomic64_dec_and_test(_v) (atomic64_sub_return(1, _v) == 0)
-static __inline__ void atomic64_clear_mask(unsigned long mask, atomic64_t * v)
+static inline void atomic64_clear_mask(unsigned long mask, atomic64_t *v)
{
- __CSG_LOOP(v, ~mask, "ngr");
+ __CSG_LOOP(v, ~mask, "ngr");
}
-static __inline__ void atomic64_set_mask(unsigned long mask, atomic64_t * v)
+static inline void atomic64_set_mask(unsigned long mask, atomic64_t *v)
{
- __CSG_LOOP(v, mask, "ogr");
+ __CSG_LOOP(v, mask, "ogr");
}
#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
-static __inline__ long long atomic64_cmpxchg(atomic64_t *v,
+static inline long long atomic64_cmpxchg(atomic64_t *v,
long long old, long long new)
{
#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
return old;
}
-static __inline__ int atomic64_add_unless(atomic64_t *v,
- long long a, long long u)
+#undef __CSG_LOOP
+
+#else /* CONFIG_64BIT */
+
+typedef struct {
+ long long counter;
+} atomic64_t;
+
+static inline long long atomic64_read(const atomic64_t *v)
+{
+ register_pair rp;
+
+ asm volatile(
+ " lm %0,%N0,0(%1)"
+ : "=&d" (rp)
+ : "a" (&v->counter), "m" (v->counter)
+ );
+ return rp.pair;
+}
+
+static inline void atomic64_set(atomic64_t *v, long long i)
+{
+ register_pair rp = {.pair = i};
+
+ asm volatile(
+ " stm %1,%N1,0(%2)"
+ : "=m" (v->counter)
+ : "d" (rp), "a" (&v->counter)
+ );
+}
+
+static inline long long atomic64_xchg(atomic64_t *v, long long new)
+{
+ register_pair rp_new = {.pair = new};
+ register_pair rp_old;
+
+ asm volatile(
+ " lm %0,%N0,0(%2)\n"
+ "0: cds %0,%3,0(%2)\n"
+ " jl 0b\n"
+ : "=&d" (rp_old), "+m" (v->counter)
+ : "a" (&v->counter), "d" (rp_new)
+ : "cc");
+ return rp_old.pair;
+}
+
+static inline long long atomic64_cmpxchg(atomic64_t *v,
+ long long old, long long new)
+{
+ register_pair rp_old = {.pair = old};
+ register_pair rp_new = {.pair = new};
+
+ asm volatile(
+ " cds %0,%3,0(%2)"
+ : "+&d" (rp_old), "+m" (v->counter)
+ : "a" (&v->counter), "d" (rp_new)
+ : "cc");
+ return rp_old.pair;
+}
+
+
+static inline long long atomic64_add_return(long long i, atomic64_t *v)
+{
+ long long old, new;
+
+ do {
+ old = atomic64_read(v);
+ new = old + i;
+ } while (atomic64_cmpxchg(v, old, new) != old);
+ return new;
+}
+
+static inline long long atomic64_sub_return(long long i, atomic64_t *v)
+{
+ long long old, new;
+
+ do {
+ old = atomic64_read(v);
+ new = old - i;
+ } while (atomic64_cmpxchg(v, old, new) != old);
+ return new;
+}
+
+static inline void atomic64_set_mask(unsigned long long mask, atomic64_t *v)
+{
+ long long old, new;
+
+ do {
+ old = atomic64_read(v);
+ new = old | mask;
+ } while (atomic64_cmpxchg(v, old, new) != old);
+}
+
+static inline void atomic64_clear_mask(unsigned long long mask, atomic64_t *v)
+{
+ long long old, new;
+
+ do {
+ old = atomic64_read(v);
+ new = old & mask;
+ } while (atomic64_cmpxchg(v, old, new) != old);
+}
+
+#endif /* CONFIG_64BIT */
+
+static inline int atomic64_add_unless(atomic64_t *v, long long a, long long u)
{
long long c, old;
c = atomic64_read(v);
return c != u;
}
-#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
-
-#undef __CSG_LOOP
-
-#else /* __s390x__ */
-
-#include <asm-generic/atomic64.h>
-
-#endif /* __s390x__ */
+#define atomic64_add(_i, _v) atomic64_add_return(_i, _v)
+#define atomic64_add_negative(_i, _v) (atomic64_add_return(_i, _v) < 0)
+#define atomic64_inc(_v) atomic64_add_return(1, _v)
+#define atomic64_inc_return(_v) atomic64_add_return(1, _v)
+#define atomic64_inc_and_test(_v) (atomic64_add_return(1, _v) == 0)
+#define atomic64_sub(_i, _v) atomic64_sub_return(_i, _v)
+#define atomic64_sub_and_test(_i, _v) (atomic64_sub_return(_i, _v) == 0)
+#define atomic64_dec(_v) atomic64_sub_return(1, _v)
+#define atomic64_dec_return(_v) atomic64_sub_return(1, _v)
+#define atomic64_dec_and_test(_v) (atomic64_sub_return(1, _v) == 0)
+#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
#define smp_mb__before_atomic_dec() smp_mb()
#define smp_mb__after_atomic_dec() smp_mb()
#define smp_mb__after_atomic_inc() smp_mb()
#include <asm-generic/atomic-long.h>
-#endif /* __KERNEL__ */
+
#endif /* __ARCH_S390_ATOMIC__ */
*/
static inline __sum16 csum_fold(__wsum sum)
{
-#ifndef __s390x__
- register_pair rp;
+ u32 csum = (__force u32) sum;
- asm volatile(
- " slr %N1,%N1\n" /* %0 = H L */
- " lr %1,%0\n" /* %0 = H L, %1 = H L 0 0 */
- " srdl %1,16\n" /* %0 = H L, %1 = 0 H L 0 */
- " alr %1,%N1\n" /* %0 = H L, %1 = L H L 0 */
- " alr %0,%1\n" /* %0 = H+L+C L+H */
- " srl %0,16\n" /* %0 = H+L+C */
- : "+&d" (sum), "=d" (rp) : : "cc");
-#else /* __s390x__ */
- asm volatile(
- " sr 3,3\n" /* %0 = H*65536 + L */
- " lr 2,%0\n" /* %0 = H L, 2/3 = H L / 0 0 */
- " srdl 2,16\n" /* %0 = H L, 2/3 = 0 H / L 0 */
- " alr 2,3\n" /* %0 = H L, 2/3 = L H / L 0 */
- " alr %0,2\n" /* %0 = H+L+C L+H */
- " srl %0,16\n" /* %0 = H+L+C */
- : "+&d" (sum) : : "cc", "2", "3");
-#endif /* __s390x__ */
- return (__force __sum16) ~sum;
+ csum += (csum >> 16) + (csum << 16);
+ csum >>= 16;
+ return (__force __sum16) ~csum;
}
/*
#define CHSC_INFO_CPD _IOWR(CHSC_IOCTL_MAGIC, 0x87, struct chsc_cpd_info)
#define CHSC_INFO_DCAL _IOWR(CHSC_IOCTL_MAGIC, 0x88, struct chsc_dcal)
+#ifdef __KERNEL__
+
+struct css_general_char {
+ u64 : 12;
+ u32 dynio : 1; /* bit 12 */
+ u32 : 28;
+ u32 aif : 1; /* bit 41 */
+ u32 : 3;
+ u32 mcss : 1; /* bit 45 */
+ u32 fcs : 1; /* bit 46 */
+ u32 : 1;
+ u32 ext_mb : 1; /* bit 48 */
+ u32 : 7;
+ u32 aif_tdd : 1; /* bit 56 */
+ u32 : 1;
+ u32 qebsm : 1; /* bit 58 */
+ u32 : 8;
+ u32 aif_osa : 1; /* bit 67 */
+ u32 : 14;
+ u32 cib : 1; /* bit 82 */
+ u32 : 5;
+ u32 fcx : 1; /* bit 88 */
+ u32 : 7;
+}__attribute__((packed));
+
+extern struct css_general_char css_general_characteristics;
+
+#endif /* __KERNEL__ */
#endif
#define LPM_ANYPATH 0xff
#define __MAX_CSSID 0
-/**
- * struct cmd_scsw - command-mode subchannel status word
- * @key: subchannel key
- * @sctl: suspend control
- * @eswf: esw format
- * @cc: deferred condition code
- * @fmt: format
- * @pfch: prefetch
- * @isic: initial-status interruption control
- * @alcc: address-limit checking control
- * @ssi: suppress-suspended interruption
- * @zcc: zero condition code
- * @ectl: extended control
- * @pno: path not operational
- * @res: reserved
- * @fctl: function control
- * @actl: activity control
- * @stctl: status control
- * @cpa: channel program address
- * @dstat: device status
- * @cstat: subchannel status
- * @count: residual count
- */
-struct cmd_scsw {
- __u32 key : 4;
- __u32 sctl : 1;
- __u32 eswf : 1;
- __u32 cc : 2;
- __u32 fmt : 1;
- __u32 pfch : 1;
- __u32 isic : 1;
- __u32 alcc : 1;
- __u32 ssi : 1;
- __u32 zcc : 1;
- __u32 ectl : 1;
- __u32 pno : 1;
- __u32 res : 1;
- __u32 fctl : 3;
- __u32 actl : 7;
- __u32 stctl : 5;
- __u32 cpa;
- __u32 dstat : 8;
- __u32 cstat : 8;
- __u32 count : 16;
-} __attribute__ ((packed));
-
-/**
- * struct tm_scsw - transport-mode subchannel status word
- * @key: subchannel key
- * @eswf: esw format
- * @cc: deferred condition code
- * @fmt: format
- * @x: IRB-format control
- * @q: interrogate-complete
- * @ectl: extended control
- * @pno: path not operational
- * @fctl: function control
- * @actl: activity control
- * @stctl: status control
- * @tcw: TCW address
- * @dstat: device status
- * @cstat: subchannel status
- * @fcxs: FCX status
- * @schxs: subchannel-extended status
- */
-struct tm_scsw {
- u32 key:4;
- u32 :1;
- u32 eswf:1;
- u32 cc:2;
- u32 fmt:3;
- u32 x:1;
- u32 q:1;
- u32 :1;
- u32 ectl:1;
- u32 pno:1;
- u32 :1;
- u32 fctl:3;
- u32 actl:7;
- u32 stctl:5;
- u32 tcw;
- u32 dstat:8;
- u32 cstat:8;
- u32 fcxs:8;
- u32 schxs:8;
-} __attribute__ ((packed));
-
-/**
- * union scsw - subchannel status word
- * @cmd: command-mode SCSW
- * @tm: transport-mode SCSW
- */
-union scsw {
- struct cmd_scsw cmd;
- struct tm_scsw tm;
-} __attribute__ ((packed));
-
-int scsw_is_tm(union scsw *scsw);
-u32 scsw_key(union scsw *scsw);
-u32 scsw_eswf(union scsw *scsw);
-u32 scsw_cc(union scsw *scsw);
-u32 scsw_ectl(union scsw *scsw);
-u32 scsw_pno(union scsw *scsw);
-u32 scsw_fctl(union scsw *scsw);
-u32 scsw_actl(union scsw *scsw);
-u32 scsw_stctl(union scsw *scsw);
-u32 scsw_dstat(union scsw *scsw);
-u32 scsw_cstat(union scsw *scsw);
-int scsw_is_solicited(union scsw *scsw);
-int scsw_is_valid_key(union scsw *scsw);
-int scsw_is_valid_eswf(union scsw *scsw);
-int scsw_is_valid_cc(union scsw *scsw);
-int scsw_is_valid_ectl(union scsw *scsw);
-int scsw_is_valid_pno(union scsw *scsw);
-int scsw_is_valid_fctl(union scsw *scsw);
-int scsw_is_valid_actl(union scsw *scsw);
-int scsw_is_valid_stctl(union scsw *scsw);
-int scsw_is_valid_dstat(union scsw *scsw);
-int scsw_is_valid_cstat(union scsw *scsw);
-int scsw_cmd_is_valid_key(union scsw *scsw);
-int scsw_cmd_is_valid_sctl(union scsw *scsw);
-int scsw_cmd_is_valid_eswf(union scsw *scsw);
-int scsw_cmd_is_valid_cc(union scsw *scsw);
-int scsw_cmd_is_valid_fmt(union scsw *scsw);
-int scsw_cmd_is_valid_pfch(union scsw *scsw);
-int scsw_cmd_is_valid_isic(union scsw *scsw);
-int scsw_cmd_is_valid_alcc(union scsw *scsw);
-int scsw_cmd_is_valid_ssi(union scsw *scsw);
-int scsw_cmd_is_valid_zcc(union scsw *scsw);
-int scsw_cmd_is_valid_ectl(union scsw *scsw);
-int scsw_cmd_is_valid_pno(union scsw *scsw);
-int scsw_cmd_is_valid_fctl(union scsw *scsw);
-int scsw_cmd_is_valid_actl(union scsw *scsw);
-int scsw_cmd_is_valid_stctl(union scsw *scsw);
-int scsw_cmd_is_valid_dstat(union scsw *scsw);
-int scsw_cmd_is_valid_cstat(union scsw *scsw);
-int scsw_cmd_is_solicited(union scsw *scsw);
-int scsw_tm_is_valid_key(union scsw *scsw);
-int scsw_tm_is_valid_eswf(union scsw *scsw);
-int scsw_tm_is_valid_cc(union scsw *scsw);
-int scsw_tm_is_valid_fmt(union scsw *scsw);
-int scsw_tm_is_valid_x(union scsw *scsw);
-int scsw_tm_is_valid_q(union scsw *scsw);
-int scsw_tm_is_valid_ectl(union scsw *scsw);
-int scsw_tm_is_valid_pno(union scsw *scsw);
-int scsw_tm_is_valid_fctl(union scsw *scsw);
-int scsw_tm_is_valid_actl(union scsw *scsw);
-int scsw_tm_is_valid_stctl(union scsw *scsw);
-int scsw_tm_is_valid_dstat(union scsw *scsw);
-int scsw_tm_is_valid_cstat(union scsw *scsw);
-int scsw_tm_is_valid_fcxs(union scsw *scsw);
-int scsw_tm_is_valid_schxs(union scsw *scsw);
-int scsw_tm_is_solicited(union scsw *scsw);
-
-#define SCSW_FCTL_CLEAR_FUNC 0x1
-#define SCSW_FCTL_HALT_FUNC 0x2
-#define SCSW_FCTL_START_FUNC 0x4
-
-#define SCSW_ACTL_SUSPENDED 0x1
-#define SCSW_ACTL_DEVACT 0x2
-#define SCSW_ACTL_SCHACT 0x4
-#define SCSW_ACTL_CLEAR_PEND 0x8
-#define SCSW_ACTL_HALT_PEND 0x10
-#define SCSW_ACTL_START_PEND 0x20
-#define SCSW_ACTL_RESUME_PEND 0x40
-
-#define SCSW_STCTL_STATUS_PEND 0x1
-#define SCSW_STCTL_SEC_STATUS 0x2
-#define SCSW_STCTL_PRIM_STATUS 0x4
-#define SCSW_STCTL_INTER_STATUS 0x8
-#define SCSW_STCTL_ALERT_STATUS 0x10
-
-#define DEV_STAT_ATTENTION 0x80
-#define DEV_STAT_STAT_MOD 0x40
-#define DEV_STAT_CU_END 0x20
-#define DEV_STAT_BUSY 0x10
-#define DEV_STAT_CHN_END 0x08
-#define DEV_STAT_DEV_END 0x04
-#define DEV_STAT_UNIT_CHECK 0x02
-#define DEV_STAT_UNIT_EXCEP 0x01
-
-#define SCHN_STAT_PCI 0x80
-#define SCHN_STAT_INCORR_LEN 0x40
-#define SCHN_STAT_PROG_CHECK 0x20
-#define SCHN_STAT_PROT_CHECK 0x10
-#define SCHN_STAT_CHN_DATA_CHK 0x08
-#define SCHN_STAT_CHN_CTRL_CHK 0x04
-#define SCHN_STAT_INTF_CTRL_CHK 0x02
-#define SCHN_STAT_CHAIN_CHECK 0x01
-
-/*
- * architectured values for first sense byte
- */
-#define SNS0_CMD_REJECT 0x80
-#define SNS_CMD_REJECT SNS0_CMD_REJEC
-#define SNS0_INTERVENTION_REQ 0x40
-#define SNS0_BUS_OUT_CHECK 0x20
-#define SNS0_EQUIPMENT_CHECK 0x10
-#define SNS0_DATA_CHECK 0x08
-#define SNS0_OVERRUN 0x04
-#define SNS0_INCOMPL_DOMAIN 0x01
-
-/*
- * architectured values for second sense byte
- */
-#define SNS1_PERM_ERR 0x80
-#define SNS1_INV_TRACK_FORMAT 0x40
-#define SNS1_EOC 0x20
-#define SNS1_MESSAGE_TO_OPER 0x10
-#define SNS1_NO_REC_FOUND 0x08
-#define SNS1_FILE_PROTECTED 0x04
-#define SNS1_WRITE_INHIBITED 0x02
-#define SNS1_INPRECISE_END 0x01
-
-/*
- * architectured values for third sense byte
- */
-#define SNS2_REQ_INH_WRITE 0x80
-#define SNS2_CORRECTABLE 0x40
-#define SNS2_FIRST_LOG_ERR 0x20
-#define SNS2_ENV_DATA_PRESENT 0x10
-#define SNS2_INPRECISE_END 0x04
+#include <asm/scsw.h>
/**
* struct ccw1 - channel command word
--- /dev/null
+/*
+ * Copyright IBM Corp. 2000,2009
+ * Author(s): Hartmut Penner <hp@de.ibm.com>,
+ * Martin Schwidefsky <schwidefsky@de.ibm.com>,
+ * Christian Ehrhardt <ehrhardt@de.ibm.com>,
+ */
+
+#ifndef _ASM_S390_CPU_H
+#define _ASM_S390_CPU_H
+
+#define MAX_CPU_ADDRESS 255
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+struct cpuid
+{
+ unsigned int version : 8;
+ unsigned int ident : 24;
+ unsigned int machine : 16;
+ unsigned int unused : 16;
+} __packed;
+
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_S390_CPU_H */
+++ /dev/null
-/*
- * Copyright IBM Corp. 2000,2009
- * Author(s): Hartmut Penner <hp@de.ibm.com>,
- * Martin Schwidefsky <schwidefsky@de.ibm.com>
- * Christian Ehrhardt <ehrhardt@de.ibm.com>
- */
-
-#ifndef _ASM_S390_CPUID_H_
-#define _ASM_S390_CPUID_H_
-
-/*
- * CPU type and hardware bug flags. Kept separately for each CPU.
- * Members of this structure are referenced in head.S, so think twice
- * before touching them. [mj]
- */
-
-typedef struct
-{
- unsigned int version : 8;
- unsigned int ident : 24;
- unsigned int machine : 16;
- unsigned int unused : 16;
-} __attribute__ ((packed)) cpuid_t;
-
-#endif /* _ASM_S390_CPUID_H_ */
return debug_event_common(id,level,txt,strlen(txt));
}
+/*
+ * IMPORTANT: Use "%s" in sprintf format strings with care! Only pointers are
+ * stored in the s390dbf. See Documentation/s390/s390dbf.txt for more details!
+ */
extern debug_entry_t *
debug_sprintf_event(debug_info_t* id,int level,char *string,...)
__attribute__ ((format(printf, 3, 4)));
return debug_exception_common(id,level,txt,strlen(txt));
}
-
+/*
+ * IMPORTANT: Use "%s" in sprintf format strings with care! Only pointers are
+ * stored in the s390dbf. See Documentation/s390/s390dbf.txt for more details!
+ */
extern debug_entry_t *
debug_sprintf_exception(debug_info_t* id,int level,char *string,...)
__attribute__ ((format(printf, 3, 4)));
#include <linux/interrupt.h>
#include <asm/lowcore.h>
-/* irq_cpustat_t is unused currently, but could be converted
- * into a percpu variable instead of storing softirq_pending
- * on the lowcore */
-typedef struct {
- unsigned int __softirq_pending;
-} irq_cpustat_t;
-
#define local_softirq_pending() (S390_lowcore.softirq_pending)
#define __ARCH_IRQ_STAT
} __attribute__((packed));
#define DIAG308_VMPARM_SIZE 64
+#define DIAG308_SCPDATA_SIZE (PAGE_SIZE - (sizeof(struct ipl_list_hdr) + \
+ offsetof(struct ipl_block_fcp, scp_data)))
struct ipl_block_ccw {
u8 load_parm[8];
extern void do_poff(void);
extern void ipl_save_parameters(void);
extern void ipl_update_parameters(void);
-extern void get_ipl_vmparm(char *);
+extern size_t append_ipl_vmparm(char *, size_t);
+extern size_t append_ipl_scpdata(char *, size_t);
enum {
IPL_DEVNO_VALID = 1,
#include <linux/interrupt.h>
#include <linux/kvm_host.h>
#include <asm/debug.h>
-#include <asm/cpuid.h>
+#include <asm/cpu.h>
#define KVM_MAX_VCPUS 64
#define KVM_MEMORY_SLOTS 32
struct hrtimer ckc_timer;
struct tasklet_struct tasklet;
union {
- cpuid_t cpu_id;
- u64 stidp_data;
+ struct cpuid cpu_id;
+ u64 stidp_data;
};
};
* This is pagesize for historical reasons. */
#define KVM_S390_VIRTIO_RING_ALIGN 4096
-#ifdef __KERNEL__
-/* early virtio console setup */
-#ifdef CONFIG_S390_GUEST
-extern void s390_virtio_console_init(void);
-#else
-static inline void s390_virtio_console_init(void)
-{
-}
-#endif /* CONFIG_VIRTIO_CONSOLE */
-#endif /* __KERNEL__ */
#endif
#ifndef __ASSEMBLY__
-#include <asm/cpuid.h>
+#include <asm/cpu.h>
#include <asm/ptrace.h>
#include <linux/types.h>
__u32 user_exec_asce; /* 0x02ac */
/* SMP info area */
- cpuid_t cpu_id; /* 0x02b0 */
+ struct cpuid cpu_id; /* 0x02b0 */
__u32 cpu_nr; /* 0x02b8 */
__u32 softirq_pending; /* 0x02bc */
__u32 percpu_offset; /* 0x02c0 */
__u64 user_exec_asce; /* 0x0318 */
/* SMP info area */
- cpuid_t cpu_id; /* 0x0320 */
+ struct cpuid cpu_id; /* 0x0320 */
__u32 cpu_nr; /* 0x0328 */
__u32 softirq_pending; /* 0x032c */
__u64 percpu_offset; /* 0x0330 */
#define __MMU_H
typedef struct {
+ spinlock_t list_lock;
struct list_head crst_list;
struct list_head pgtable_list;
unsigned long asce_bits;
return skey;
}
-#ifdef CONFIG_PAGE_STATES
-
struct page;
void arch_free_page(struct page *page, int order);
void arch_alloc_page(struct page *page, int order);
#define HAVE_ARCH_FREE_PAGE
#define HAVE_ARCH_ALLOC_PAGE
-#endif
-
#endif /* !__ASSEMBLY__ */
#define __PAGE_OFFSET 0x0UL
static inline pgd_t *pgd_alloc(struct mm_struct *mm)
{
+ spin_lock_init(&mm->context.list_lock);
INIT_LIST_HEAD(&mm->context.crst_list);
INIT_LIST_HEAD(&mm->context.pgtable_list);
return (pgd_t *) crst_table_alloc(mm, s390_noexec);
#define __ASM_S390_PROCESSOR_H
#include <linux/linkage.h>
-#include <asm/cpuid.h>
+#include <asm/cpu.h>
#include <asm/page.h>
#include <asm/ptrace.h>
#include <asm/setup.h>
*/
#define current_text_addr() ({ void *pc; asm("basr %0,0" : "=a" (pc)); pc; })
-static inline void get_cpu_id(cpuid_t *ptr)
+static inline void get_cpu_id(struct cpuid *ptr)
{
asm volatile("stidp 0(%1)" : "=m" (*ptr) : "a" (ptr));
}
-#ifndef _ASMS390_SCATTERLIST_H
-#define _ASMS390_SCATTERLIST_H
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
- unsigned long sg_magic;
-#endif
- unsigned long page_link;
- unsigned int offset;
- unsigned int length;
-};
-
-#ifdef __s390x__
-#define ISA_DMA_THRESHOLD (0xffffffffffffffffUL)
-#else
-#define ISA_DMA_THRESHOLD (0xffffffffUL)
-#endif
-
-#endif /* _ASMS390X_SCATTERLIST_H */
+#include <asm-generic/scatterlist.h>
/*
* Helper functions for scsw access.
*
- * Copyright IBM Corp. 2008
+ * Copyright IBM Corp. 2008,2009
* Author(s): Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
*/
+#ifndef _ASM_S390_SCSW_H_
+#define _ASM_S390_SCSW_H_
+
#include <linux/types.h>
-#include <linux/module.h>
+#include <asm/chsc.h>
#include <asm/cio.h>
-#include "css.h"
-#include "chsc.h"
+
+/**
+ * struct cmd_scsw - command-mode subchannel status word
+ * @key: subchannel key
+ * @sctl: suspend control
+ * @eswf: esw format
+ * @cc: deferred condition code
+ * @fmt: format
+ * @pfch: prefetch
+ * @isic: initial-status interruption control
+ * @alcc: address-limit checking control
+ * @ssi: suppress-suspended interruption
+ * @zcc: zero condition code
+ * @ectl: extended control
+ * @pno: path not operational
+ * @res: reserved
+ * @fctl: function control
+ * @actl: activity control
+ * @stctl: status control
+ * @cpa: channel program address
+ * @dstat: device status
+ * @cstat: subchannel status
+ * @count: residual count
+ */
+struct cmd_scsw {
+ __u32 key : 4;
+ __u32 sctl : 1;
+ __u32 eswf : 1;
+ __u32 cc : 2;
+ __u32 fmt : 1;
+ __u32 pfch : 1;
+ __u32 isic : 1;
+ __u32 alcc : 1;
+ __u32 ssi : 1;
+ __u32 zcc : 1;
+ __u32 ectl : 1;
+ __u32 pno : 1;
+ __u32 res : 1;
+ __u32 fctl : 3;
+ __u32 actl : 7;
+ __u32 stctl : 5;
+ __u32 cpa;
+ __u32 dstat : 8;
+ __u32 cstat : 8;
+ __u32 count : 16;
+} __attribute__ ((packed));
+
+/**
+ * struct tm_scsw - transport-mode subchannel status word
+ * @key: subchannel key
+ * @eswf: esw format
+ * @cc: deferred condition code
+ * @fmt: format
+ * @x: IRB-format control
+ * @q: interrogate-complete
+ * @ectl: extended control
+ * @pno: path not operational
+ * @fctl: function control
+ * @actl: activity control
+ * @stctl: status control
+ * @tcw: TCW address
+ * @dstat: device status
+ * @cstat: subchannel status
+ * @fcxs: FCX status
+ * @schxs: subchannel-extended status
+ */
+struct tm_scsw {
+ u32 key:4;
+ u32 :1;
+ u32 eswf:1;
+ u32 cc:2;
+ u32 fmt:3;
+ u32 x:1;
+ u32 q:1;
+ u32 :1;
+ u32 ectl:1;
+ u32 pno:1;
+ u32 :1;
+ u32 fctl:3;
+ u32 actl:7;
+ u32 stctl:5;
+ u32 tcw;
+ u32 dstat:8;
+ u32 cstat:8;
+ u32 fcxs:8;
+ u32 schxs:8;
+} __attribute__ ((packed));
+
+/**
+ * union scsw - subchannel status word
+ * @cmd: command-mode SCSW
+ * @tm: transport-mode SCSW
+ */
+union scsw {
+ struct cmd_scsw cmd;
+ struct tm_scsw tm;
+} __attribute__ ((packed));
+
+#define SCSW_FCTL_CLEAR_FUNC 0x1
+#define SCSW_FCTL_HALT_FUNC 0x2
+#define SCSW_FCTL_START_FUNC 0x4
+
+#define SCSW_ACTL_SUSPENDED 0x1
+#define SCSW_ACTL_DEVACT 0x2
+#define SCSW_ACTL_SCHACT 0x4
+#define SCSW_ACTL_CLEAR_PEND 0x8
+#define SCSW_ACTL_HALT_PEND 0x10
+#define SCSW_ACTL_START_PEND 0x20
+#define SCSW_ACTL_RESUME_PEND 0x40
+
+#define SCSW_STCTL_STATUS_PEND 0x1
+#define SCSW_STCTL_SEC_STATUS 0x2
+#define SCSW_STCTL_PRIM_STATUS 0x4
+#define SCSW_STCTL_INTER_STATUS 0x8
+#define SCSW_STCTL_ALERT_STATUS 0x10
+
+#define DEV_STAT_ATTENTION 0x80
+#define DEV_STAT_STAT_MOD 0x40
+#define DEV_STAT_CU_END 0x20
+#define DEV_STAT_BUSY 0x10
+#define DEV_STAT_CHN_END 0x08
+#define DEV_STAT_DEV_END 0x04
+#define DEV_STAT_UNIT_CHECK 0x02
+#define DEV_STAT_UNIT_EXCEP 0x01
+
+#define SCHN_STAT_PCI 0x80
+#define SCHN_STAT_INCORR_LEN 0x40
+#define SCHN_STAT_PROG_CHECK 0x20
+#define SCHN_STAT_PROT_CHECK 0x10
+#define SCHN_STAT_CHN_DATA_CHK 0x08
+#define SCHN_STAT_CHN_CTRL_CHK 0x04
+#define SCHN_STAT_INTF_CTRL_CHK 0x02
+#define SCHN_STAT_CHAIN_CHECK 0x01
+
+/*
+ * architectured values for first sense byte
+ */
+#define SNS0_CMD_REJECT 0x80
+#define SNS_CMD_REJECT SNS0_CMD_REJEC
+#define SNS0_INTERVENTION_REQ 0x40
+#define SNS0_BUS_OUT_CHECK 0x20
+#define SNS0_EQUIPMENT_CHECK 0x10
+#define SNS0_DATA_CHECK 0x08
+#define SNS0_OVERRUN 0x04
+#define SNS0_INCOMPL_DOMAIN 0x01
+
+/*
+ * architectured values for second sense byte
+ */
+#define SNS1_PERM_ERR 0x80
+#define SNS1_INV_TRACK_FORMAT 0x40
+#define SNS1_EOC 0x20
+#define SNS1_MESSAGE_TO_OPER 0x10
+#define SNS1_NO_REC_FOUND 0x08
+#define SNS1_FILE_PROTECTED 0x04
+#define SNS1_WRITE_INHIBITED 0x02
+#define SNS1_INPRECISE_END 0x01
+
+/*
+ * architectured values for third sense byte
+ */
+#define SNS2_REQ_INH_WRITE 0x80
+#define SNS2_CORRECTABLE 0x40
+#define SNS2_FIRST_LOG_ERR 0x20
+#define SNS2_ENV_DATA_PRESENT 0x10
+#define SNS2_INPRECISE_END 0x04
/**
* scsw_is_tm - check for transport mode scsw
* Return non-zero if the specified scsw is a transport mode scsw, zero
* otherwise.
*/
-int scsw_is_tm(union scsw *scsw)
+static inline int scsw_is_tm(union scsw *scsw)
{
return css_general_characteristics.fcx && (scsw->tm.x == 1);
}
-EXPORT_SYMBOL(scsw_is_tm);
/**
* scsw_key - return scsw key field
* Return the value of the key field of the specified scsw, regardless of
* whether it is a transport mode or command mode scsw.
*/
-u32 scsw_key(union scsw *scsw)
+static inline u32 scsw_key(union scsw *scsw)
{
if (scsw_is_tm(scsw))
return scsw->tm.key;
else
return scsw->cmd.key;
}
-EXPORT_SYMBOL(scsw_key);
/**
* scsw_eswf - return scsw eswf field
* Return the value of the eswf field of the specified scsw, regardless of
* whether it is a transport mode or command mode scsw.
*/
-u32 scsw_eswf(union scsw *scsw)
+static inline u32 scsw_eswf(union scsw *scsw)
{
if (scsw_is_tm(scsw))
return scsw->tm.eswf;
else
return scsw->cmd.eswf;
}
-EXPORT_SYMBOL(scsw_eswf);
/**
* scsw_cc - return scsw cc field
* Return the value of the cc field of the specified scsw, regardless of
* whether it is a transport mode or command mode scsw.
*/
-u32 scsw_cc(union scsw *scsw)
+static inline u32 scsw_cc(union scsw *scsw)
{
if (scsw_is_tm(scsw))
return scsw->tm.cc;
else
return scsw->cmd.cc;
}
-EXPORT_SYMBOL(scsw_cc);
/**
* scsw_ectl - return scsw ectl field
* Return the value of the ectl field of the specified scsw, regardless of
* whether it is a transport mode or command mode scsw.
*/
-u32 scsw_ectl(union scsw *scsw)
+static inline u32 scsw_ectl(union scsw *scsw)
{
if (scsw_is_tm(scsw))
return scsw->tm.ectl;
else
return scsw->cmd.ectl;
}
-EXPORT_SYMBOL(scsw_ectl);
/**
* scsw_pno - return scsw pno field
* Return the value of the pno field of the specified scsw, regardless of
* whether it is a transport mode or command mode scsw.
*/
-u32 scsw_pno(union scsw *scsw)
+static inline u32 scsw_pno(union scsw *scsw)
{
if (scsw_is_tm(scsw))
return scsw->tm.pno;
else
return scsw->cmd.pno;
}
-EXPORT_SYMBOL(scsw_pno);
/**
* scsw_fctl - return scsw fctl field
* Return the value of the fctl field of the specified scsw, regardless of
* whether it is a transport mode or command mode scsw.
*/
-u32 scsw_fctl(union scsw *scsw)
+static inline u32 scsw_fctl(union scsw *scsw)
{
if (scsw_is_tm(scsw))
return scsw->tm.fctl;
else
return scsw->cmd.fctl;
}
-EXPORT_SYMBOL(scsw_fctl);
/**
* scsw_actl - return scsw actl field
* Return the value of the actl field of the specified scsw, regardless of
* whether it is a transport mode or command mode scsw.
*/
-u32 scsw_actl(union scsw *scsw)
+static inline u32 scsw_actl(union scsw *scsw)
{
if (scsw_is_tm(scsw))
return scsw->tm.actl;
else
return scsw->cmd.actl;
}
-EXPORT_SYMBOL(scsw_actl);
/**
* scsw_stctl - return scsw stctl field
* Return the value of the stctl field of the specified scsw, regardless of
* whether it is a transport mode or command mode scsw.
*/
-u32 scsw_stctl(union scsw *scsw)
+static inline u32 scsw_stctl(union scsw *scsw)
{
if (scsw_is_tm(scsw))
return scsw->tm.stctl;
else
return scsw->cmd.stctl;
}
-EXPORT_SYMBOL(scsw_stctl);
/**
* scsw_dstat - return scsw dstat field
* Return the value of the dstat field of the specified scsw, regardless of
* whether it is a transport mode or command mode scsw.
*/
-u32 scsw_dstat(union scsw *scsw)
+static inline u32 scsw_dstat(union scsw *scsw)
{
if (scsw_is_tm(scsw))
return scsw->tm.dstat;
else
return scsw->cmd.dstat;
}
-EXPORT_SYMBOL(scsw_dstat);
/**
* scsw_cstat - return scsw cstat field
* Return the value of the cstat field of the specified scsw, regardless of
* whether it is a transport mode or command mode scsw.
*/
-u32 scsw_cstat(union scsw *scsw)
+static inline u32 scsw_cstat(union scsw *scsw)
{
if (scsw_is_tm(scsw))
return scsw->tm.cstat;
else
return scsw->cmd.cstat;
}
-EXPORT_SYMBOL(scsw_cstat);
/**
* scsw_cmd_is_valid_key - check key field validity
* Return non-zero if the key field of the specified command mode scsw is
* valid, zero otherwise.
*/
-int scsw_cmd_is_valid_key(union scsw *scsw)
+static inline int scsw_cmd_is_valid_key(union scsw *scsw)
{
return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC);
}
-EXPORT_SYMBOL(scsw_cmd_is_valid_key);
/**
* scsw_cmd_is_valid_sctl - check fctl field validity
* Return non-zero if the fctl field of the specified command mode scsw is
* valid, zero otherwise.
*/
-int scsw_cmd_is_valid_sctl(union scsw *scsw)
+static inline int scsw_cmd_is_valid_sctl(union scsw *scsw)
{
return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC);
}
-EXPORT_SYMBOL(scsw_cmd_is_valid_sctl);
/**
* scsw_cmd_is_valid_eswf - check eswf field validity
* Return non-zero if the eswf field of the specified command mode scsw is
* valid, zero otherwise.
*/
-int scsw_cmd_is_valid_eswf(union scsw *scsw)
+static inline int scsw_cmd_is_valid_eswf(union scsw *scsw)
{
return (scsw->cmd.stctl & SCSW_STCTL_STATUS_PEND);
}
-EXPORT_SYMBOL(scsw_cmd_is_valid_eswf);
/**
* scsw_cmd_is_valid_cc - check cc field validity
* Return non-zero if the cc field of the specified command mode scsw is
* valid, zero otherwise.
*/
-int scsw_cmd_is_valid_cc(union scsw *scsw)
+static inline int scsw_cmd_is_valid_cc(union scsw *scsw)
{
return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC) &&
(scsw->cmd.stctl & SCSW_STCTL_STATUS_PEND);
}
-EXPORT_SYMBOL(scsw_cmd_is_valid_cc);
/**
* scsw_cmd_is_valid_fmt - check fmt field validity
* Return non-zero if the fmt field of the specified command mode scsw is
* valid, zero otherwise.
*/
-int scsw_cmd_is_valid_fmt(union scsw *scsw)
+static inline int scsw_cmd_is_valid_fmt(union scsw *scsw)
{
return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC);
}
-EXPORT_SYMBOL(scsw_cmd_is_valid_fmt);
/**
* scsw_cmd_is_valid_pfch - check pfch field validity
* Return non-zero if the pfch field of the specified command mode scsw is
* valid, zero otherwise.
*/
-int scsw_cmd_is_valid_pfch(union scsw *scsw)
+static inline int scsw_cmd_is_valid_pfch(union scsw *scsw)
{
return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC);
}
-EXPORT_SYMBOL(scsw_cmd_is_valid_pfch);
/**
* scsw_cmd_is_valid_isic - check isic field validity
* Return non-zero if the isic field of the specified command mode scsw is
* valid, zero otherwise.
*/
-int scsw_cmd_is_valid_isic(union scsw *scsw)
+static inline int scsw_cmd_is_valid_isic(union scsw *scsw)
{
return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC);
}
-EXPORT_SYMBOL(scsw_cmd_is_valid_isic);
/**
* scsw_cmd_is_valid_alcc - check alcc field validity
* Return non-zero if the alcc field of the specified command mode scsw is
* valid, zero otherwise.
*/
-int scsw_cmd_is_valid_alcc(union scsw *scsw)
+static inline int scsw_cmd_is_valid_alcc(union scsw *scsw)
{
return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC);
}
-EXPORT_SYMBOL(scsw_cmd_is_valid_alcc);
/**
* scsw_cmd_is_valid_ssi - check ssi field validity
* Return non-zero if the ssi field of the specified command mode scsw is
* valid, zero otherwise.
*/
-int scsw_cmd_is_valid_ssi(union scsw *scsw)
+static inline int scsw_cmd_is_valid_ssi(union scsw *scsw)
{
return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC);
}
-EXPORT_SYMBOL(scsw_cmd_is_valid_ssi);
/**
* scsw_cmd_is_valid_zcc - check zcc field validity
* Return non-zero if the zcc field of the specified command mode scsw is
* valid, zero otherwise.
*/
-int scsw_cmd_is_valid_zcc(union scsw *scsw)
+static inline int scsw_cmd_is_valid_zcc(union scsw *scsw)
{
return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC) &&
(scsw->cmd.stctl & SCSW_STCTL_INTER_STATUS);
}
-EXPORT_SYMBOL(scsw_cmd_is_valid_zcc);
/**
* scsw_cmd_is_valid_ectl - check ectl field validity
* Return non-zero if the ectl field of the specified command mode scsw is
* valid, zero otherwise.
*/
-int scsw_cmd_is_valid_ectl(union scsw *scsw)
+static inline int scsw_cmd_is_valid_ectl(union scsw *scsw)
{
return (scsw->cmd.stctl & SCSW_STCTL_STATUS_PEND) &&
!(scsw->cmd.stctl & SCSW_STCTL_INTER_STATUS) &&
(scsw->cmd.stctl & SCSW_STCTL_ALERT_STATUS);
}
-EXPORT_SYMBOL(scsw_cmd_is_valid_ectl);
/**
* scsw_cmd_is_valid_pno - check pno field validity
* Return non-zero if the pno field of the specified command mode scsw is
* valid, zero otherwise.
*/
-int scsw_cmd_is_valid_pno(union scsw *scsw)
+static inline int scsw_cmd_is_valid_pno(union scsw *scsw)
{
return (scsw->cmd.fctl != 0) &&
(scsw->cmd.stctl & SCSW_STCTL_STATUS_PEND) &&
((scsw->cmd.stctl & SCSW_STCTL_INTER_STATUS) &&
(scsw->cmd.actl & SCSW_ACTL_SUSPENDED)));
}
-EXPORT_SYMBOL(scsw_cmd_is_valid_pno);
/**
* scsw_cmd_is_valid_fctl - check fctl field validity
* Return non-zero if the fctl field of the specified command mode scsw is
* valid, zero otherwise.
*/
-int scsw_cmd_is_valid_fctl(union scsw *scsw)
+static inline int scsw_cmd_is_valid_fctl(union scsw *scsw)
{
/* Only valid if pmcw.dnv == 1*/
return 1;
}
-EXPORT_SYMBOL(scsw_cmd_is_valid_fctl);
/**
* scsw_cmd_is_valid_actl - check actl field validity
* Return non-zero if the actl field of the specified command mode scsw is
* valid, zero otherwise.
*/
-int scsw_cmd_is_valid_actl(union scsw *scsw)
+static inline int scsw_cmd_is_valid_actl(union scsw *scsw)
{
/* Only valid if pmcw.dnv == 1*/
return 1;
}
-EXPORT_SYMBOL(scsw_cmd_is_valid_actl);
/**
* scsw_cmd_is_valid_stctl - check stctl field validity
* Return non-zero if the stctl field of the specified command mode scsw is
* valid, zero otherwise.
*/
-int scsw_cmd_is_valid_stctl(union scsw *scsw)
+static inline int scsw_cmd_is_valid_stctl(union scsw *scsw)
{
/* Only valid if pmcw.dnv == 1*/
return 1;
}
-EXPORT_SYMBOL(scsw_cmd_is_valid_stctl);
/**
* scsw_cmd_is_valid_dstat - check dstat field validity
* Return non-zero if the dstat field of the specified command mode scsw is
* valid, zero otherwise.
*/
-int scsw_cmd_is_valid_dstat(union scsw *scsw)
+static inline int scsw_cmd_is_valid_dstat(union scsw *scsw)
{
return (scsw->cmd.stctl & SCSW_STCTL_STATUS_PEND) &&
(scsw->cmd.cc != 3);
}
-EXPORT_SYMBOL(scsw_cmd_is_valid_dstat);
/**
* scsw_cmd_is_valid_cstat - check cstat field validity
* Return non-zero if the cstat field of the specified command mode scsw is
* valid, zero otherwise.
*/
-int scsw_cmd_is_valid_cstat(union scsw *scsw)
+static inline int scsw_cmd_is_valid_cstat(union scsw *scsw)
{
return (scsw->cmd.stctl & SCSW_STCTL_STATUS_PEND) &&
(scsw->cmd.cc != 3);
}
-EXPORT_SYMBOL(scsw_cmd_is_valid_cstat);
/**
* scsw_tm_is_valid_key - check key field validity
* Return non-zero if the key field of the specified transport mode scsw is
* valid, zero otherwise.
*/
-int scsw_tm_is_valid_key(union scsw *scsw)
+static inline int scsw_tm_is_valid_key(union scsw *scsw)
{
return (scsw->tm.fctl & SCSW_FCTL_START_FUNC);
}
-EXPORT_SYMBOL(scsw_tm_is_valid_key);
/**
* scsw_tm_is_valid_eswf - check eswf field validity
* Return non-zero if the eswf field of the specified transport mode scsw is
* valid, zero otherwise.
*/
-int scsw_tm_is_valid_eswf(union scsw *scsw)
+static inline int scsw_tm_is_valid_eswf(union scsw *scsw)
{
return (scsw->tm.stctl & SCSW_STCTL_STATUS_PEND);
}
-EXPORT_SYMBOL(scsw_tm_is_valid_eswf);
/**
* scsw_tm_is_valid_cc - check cc field validity
* Return non-zero if the cc field of the specified transport mode scsw is
* valid, zero otherwise.
*/
-int scsw_tm_is_valid_cc(union scsw *scsw)
+static inline int scsw_tm_is_valid_cc(union scsw *scsw)
{
return (scsw->tm.fctl & SCSW_FCTL_START_FUNC) &&
(scsw->tm.stctl & SCSW_STCTL_STATUS_PEND);
}
-EXPORT_SYMBOL(scsw_tm_is_valid_cc);
/**
* scsw_tm_is_valid_fmt - check fmt field validity
* Return non-zero if the fmt field of the specified transport mode scsw is
* valid, zero otherwise.
*/
-int scsw_tm_is_valid_fmt(union scsw *scsw)
+static inline int scsw_tm_is_valid_fmt(union scsw *scsw)
{
return 1;
}
-EXPORT_SYMBOL(scsw_tm_is_valid_fmt);
/**
* scsw_tm_is_valid_x - check x field validity
* Return non-zero if the x field of the specified transport mode scsw is
* valid, zero otherwise.
*/
-int scsw_tm_is_valid_x(union scsw *scsw)
+static inline int scsw_tm_is_valid_x(union scsw *scsw)
{
return 1;
}
-EXPORT_SYMBOL(scsw_tm_is_valid_x);
/**
* scsw_tm_is_valid_q - check q field validity
* Return non-zero if the q field of the specified transport mode scsw is
* valid, zero otherwise.
*/
-int scsw_tm_is_valid_q(union scsw *scsw)
+static inline int scsw_tm_is_valid_q(union scsw *scsw)
{
return 1;
}
-EXPORT_SYMBOL(scsw_tm_is_valid_q);
/**
* scsw_tm_is_valid_ectl - check ectl field validity
* Return non-zero if the ectl field of the specified transport mode scsw is
* valid, zero otherwise.
*/
-int scsw_tm_is_valid_ectl(union scsw *scsw)
+static inline int scsw_tm_is_valid_ectl(union scsw *scsw)
{
return (scsw->tm.stctl & SCSW_STCTL_STATUS_PEND) &&
!(scsw->tm.stctl & SCSW_STCTL_INTER_STATUS) &&
(scsw->tm.stctl & SCSW_STCTL_ALERT_STATUS);
}
-EXPORT_SYMBOL(scsw_tm_is_valid_ectl);
/**
* scsw_tm_is_valid_pno - check pno field validity
* Return non-zero if the pno field of the specified transport mode scsw is
* valid, zero otherwise.
*/
-int scsw_tm_is_valid_pno(union scsw *scsw)
+static inline int scsw_tm_is_valid_pno(union scsw *scsw)
{
return (scsw->tm.fctl != 0) &&
(scsw->tm.stctl & SCSW_STCTL_STATUS_PEND) &&
((scsw->tm.stctl & SCSW_STCTL_INTER_STATUS) &&
(scsw->tm.actl & SCSW_ACTL_SUSPENDED)));
}
-EXPORT_SYMBOL(scsw_tm_is_valid_pno);
/**
* scsw_tm_is_valid_fctl - check fctl field validity
* Return non-zero if the fctl field of the specified transport mode scsw is
* valid, zero otherwise.
*/
-int scsw_tm_is_valid_fctl(union scsw *scsw)
+static inline int scsw_tm_is_valid_fctl(union scsw *scsw)
{
/* Only valid if pmcw.dnv == 1*/
return 1;
}
-EXPORT_SYMBOL(scsw_tm_is_valid_fctl);
/**
* scsw_tm_is_valid_actl - check actl field validity
* Return non-zero if the actl field of the specified transport mode scsw is
* valid, zero otherwise.
*/
-int scsw_tm_is_valid_actl(union scsw *scsw)
+static inline int scsw_tm_is_valid_actl(union scsw *scsw)
{
/* Only valid if pmcw.dnv == 1*/
return 1;
}
-EXPORT_SYMBOL(scsw_tm_is_valid_actl);
/**
* scsw_tm_is_valid_stctl - check stctl field validity
* Return non-zero if the stctl field of the specified transport mode scsw is
* valid, zero otherwise.
*/
-int scsw_tm_is_valid_stctl(union scsw *scsw)
+static inline int scsw_tm_is_valid_stctl(union scsw *scsw)
{
/* Only valid if pmcw.dnv == 1*/
return 1;
}
-EXPORT_SYMBOL(scsw_tm_is_valid_stctl);
/**
* scsw_tm_is_valid_dstat - check dstat field validity
* Return non-zero if the dstat field of the specified transport mode scsw is
* valid, zero otherwise.
*/
-int scsw_tm_is_valid_dstat(union scsw *scsw)
+static inline int scsw_tm_is_valid_dstat(union scsw *scsw)
{
return (scsw->tm.stctl & SCSW_STCTL_STATUS_PEND) &&
(scsw->tm.cc != 3);
}
-EXPORT_SYMBOL(scsw_tm_is_valid_dstat);
/**
* scsw_tm_is_valid_cstat - check cstat field validity
* Return non-zero if the cstat field of the specified transport mode scsw is
* valid, zero otherwise.
*/
-int scsw_tm_is_valid_cstat(union scsw *scsw)
+static inline int scsw_tm_is_valid_cstat(union scsw *scsw)
{
return (scsw->tm.stctl & SCSW_STCTL_STATUS_PEND) &&
(scsw->tm.cc != 3);
}
-EXPORT_SYMBOL(scsw_tm_is_valid_cstat);
/**
* scsw_tm_is_valid_fcxs - check fcxs field validity
* Return non-zero if the fcxs field of the specified transport mode scsw is
* valid, zero otherwise.
*/
-int scsw_tm_is_valid_fcxs(union scsw *scsw)
+static inline int scsw_tm_is_valid_fcxs(union scsw *scsw)
{
return 1;
}
-EXPORT_SYMBOL(scsw_tm_is_valid_fcxs);
/**
* scsw_tm_is_valid_schxs - check schxs field validity
* Return non-zero if the schxs field of the specified transport mode scsw is
* valid, zero otherwise.
*/
-int scsw_tm_is_valid_schxs(union scsw *scsw)
+static inline int scsw_tm_is_valid_schxs(union scsw *scsw)
{
return (scsw->tm.cstat & (SCHN_STAT_PROG_CHECK |
SCHN_STAT_INTF_CTRL_CHK |
SCHN_STAT_PROT_CHECK |
SCHN_STAT_CHN_DATA_CHK));
}
-EXPORT_SYMBOL(scsw_tm_is_valid_schxs);
/**
* scsw_is_valid_actl - check actl field validity
* regardless of whether it is a transport mode or command mode scsw.
* Return zero if the field does not contain a valid value.
*/
-int scsw_is_valid_actl(union scsw *scsw)
+static inline int scsw_is_valid_actl(union scsw *scsw)
{
if (scsw_is_tm(scsw))
return scsw_tm_is_valid_actl(scsw);
else
return scsw_cmd_is_valid_actl(scsw);
}
-EXPORT_SYMBOL(scsw_is_valid_actl);
/**
* scsw_is_valid_cc - check cc field validity
* regardless of whether it is a transport mode or command mode scsw.
* Return zero if the field does not contain a valid value.
*/
-int scsw_is_valid_cc(union scsw *scsw)
+static inline int scsw_is_valid_cc(union scsw *scsw)
{
if (scsw_is_tm(scsw))
return scsw_tm_is_valid_cc(scsw);
else
return scsw_cmd_is_valid_cc(scsw);
}
-EXPORT_SYMBOL(scsw_is_valid_cc);
/**
* scsw_is_valid_cstat - check cstat field validity
* regardless of whether it is a transport mode or command mode scsw.
* Return zero if the field does not contain a valid value.
*/
-int scsw_is_valid_cstat(union scsw *scsw)
+static inline int scsw_is_valid_cstat(union scsw *scsw)
{
if (scsw_is_tm(scsw))
return scsw_tm_is_valid_cstat(scsw);
else
return scsw_cmd_is_valid_cstat(scsw);
}
-EXPORT_SYMBOL(scsw_is_valid_cstat);
/**
* scsw_is_valid_dstat - check dstat field validity
* regardless of whether it is a transport mode or command mode scsw.
* Return zero if the field does not contain a valid value.
*/
-int scsw_is_valid_dstat(union scsw *scsw)
+static inline int scsw_is_valid_dstat(union scsw *scsw)
{
if (scsw_is_tm(scsw))
return scsw_tm_is_valid_dstat(scsw);
else
return scsw_cmd_is_valid_dstat(scsw);
}
-EXPORT_SYMBOL(scsw_is_valid_dstat);
/**
* scsw_is_valid_ectl - check ectl field validity
* regardless of whether it is a transport mode or command mode scsw.
* Return zero if the field does not contain a valid value.
*/
-int scsw_is_valid_ectl(union scsw *scsw)
+static inline int scsw_is_valid_ectl(union scsw *scsw)
{
if (scsw_is_tm(scsw))
return scsw_tm_is_valid_ectl(scsw);
else
return scsw_cmd_is_valid_ectl(scsw);
}
-EXPORT_SYMBOL(scsw_is_valid_ectl);
/**
* scsw_is_valid_eswf - check eswf field validity
* regardless of whether it is a transport mode or command mode scsw.
* Return zero if the field does not contain a valid value.
*/
-int scsw_is_valid_eswf(union scsw *scsw)
+static inline int scsw_is_valid_eswf(union scsw *scsw)
{
if (scsw_is_tm(scsw))
return scsw_tm_is_valid_eswf(scsw);
else
return scsw_cmd_is_valid_eswf(scsw);
}
-EXPORT_SYMBOL(scsw_is_valid_eswf);
/**
* scsw_is_valid_fctl - check fctl field validity
* regardless of whether it is a transport mode or command mode scsw.
* Return zero if the field does not contain a valid value.
*/
-int scsw_is_valid_fctl(union scsw *scsw)
+static inline int scsw_is_valid_fctl(union scsw *scsw)
{
if (scsw_is_tm(scsw))
return scsw_tm_is_valid_fctl(scsw);
else
return scsw_cmd_is_valid_fctl(scsw);
}
-EXPORT_SYMBOL(scsw_is_valid_fctl);
/**
* scsw_is_valid_key - check key field validity
* regardless of whether it is a transport mode or command mode scsw.
* Return zero if the field does not contain a valid value.
*/
-int scsw_is_valid_key(union scsw *scsw)
+static inline int scsw_is_valid_key(union scsw *scsw)
{
if (scsw_is_tm(scsw))
return scsw_tm_is_valid_key(scsw);
else
return scsw_cmd_is_valid_key(scsw);
}
-EXPORT_SYMBOL(scsw_is_valid_key);
/**
* scsw_is_valid_pno - check pno field validity
* regardless of whether it is a transport mode or command mode scsw.
* Return zero if the field does not contain a valid value.
*/
-int scsw_is_valid_pno(union scsw *scsw)
+static inline int scsw_is_valid_pno(union scsw *scsw)
{
if (scsw_is_tm(scsw))
return scsw_tm_is_valid_pno(scsw);
else
return scsw_cmd_is_valid_pno(scsw);
}
-EXPORT_SYMBOL(scsw_is_valid_pno);
/**
* scsw_is_valid_stctl - check stctl field validity
* regardless of whether it is a transport mode or command mode scsw.
* Return zero if the field does not contain a valid value.
*/
-int scsw_is_valid_stctl(union scsw *scsw)
+static inline int scsw_is_valid_stctl(union scsw *scsw)
{
if (scsw_is_tm(scsw))
return scsw_tm_is_valid_stctl(scsw);
else
return scsw_cmd_is_valid_stctl(scsw);
}
-EXPORT_SYMBOL(scsw_is_valid_stctl);
/**
* scsw_cmd_is_solicited - check for solicited scsw
* Return non-zero if the command mode scsw indicates that the associated
* status condition is solicited, zero if it is unsolicited.
*/
-int scsw_cmd_is_solicited(union scsw *scsw)
+static inline int scsw_cmd_is_solicited(union scsw *scsw)
{
return (scsw->cmd.cc != 0) || (scsw->cmd.stctl !=
(SCSW_STCTL_STATUS_PEND | SCSW_STCTL_ALERT_STATUS));
}
-EXPORT_SYMBOL(scsw_cmd_is_solicited);
/**
* scsw_tm_is_solicited - check for solicited scsw
* Return non-zero if the transport mode scsw indicates that the associated
* status condition is solicited, zero if it is unsolicited.
*/
-int scsw_tm_is_solicited(union scsw *scsw)
+static inline int scsw_tm_is_solicited(union scsw *scsw)
{
return (scsw->tm.cc != 0) || (scsw->tm.stctl !=
(SCSW_STCTL_STATUS_PEND | SCSW_STCTL_ALERT_STATUS));
}
-EXPORT_SYMBOL(scsw_tm_is_solicited);
/**
* scsw_is_solicited - check for solicited scsw
* Return non-zero if the transport or command mode scsw indicates that the
* associated status condition is solicited, zero if it is unsolicited.
*/
-int scsw_is_solicited(union scsw *scsw)
+static inline int scsw_is_solicited(union scsw *scsw)
{
if (scsw_is_tm(scsw))
return scsw_tm_is_solicited(scsw);
else
return scsw_cmd_is_solicited(scsw);
}
-EXPORT_SYMBOL(scsw_is_solicited);
+
+#endif /* _ASM_S390_SCSW_H_ */
#ifndef _ASM_S390_SETUP_H
#define _ASM_S390_SETUP_H
-#define COMMAND_LINE_SIZE 1024
+#define COMMAND_LINE_SIZE 4096
#define ARCH_COMMAND_LINE_SIZE 896
#define PROC_CHANGE_PENALTY 20 /* Schedule penalty */
#define raw_smp_processor_id() (S390_lowcore.cpu_nr)
-
-/*
- * returns 1 if cpu is in stopped/check stopped state or not operational
- * returns 0 otherwise
- */
-static inline int
-smp_cpu_not_running(int cpu)
-{
- __u32 status;
-
- switch (signal_processor_ps(&status, 0, cpu, sigp_sense)) {
- case sigp_order_code_accepted:
- case sigp_status_stored:
- /* Check for stopped and check stop state */
- if (status & 0x50)
- return 1;
- break;
- case sigp_not_operational:
- return 1;
- default:
- break;
- }
- return 0;
-}
-
-#define cpu_logical_map(cpu) (cpu)
+#define cpu_logical_map(cpu) (cpu)
extern int __cpu_disable (void);
extern void __cpu_die (unsigned int cpu);
#endif
-#ifndef CONFIG_SMP
-#define hard_smp_processor_id() 0
-#define smp_cpu_not_running(cpu) 1
-#endif
-
#ifdef CONFIG_HOTPLUG_CPU
extern int smp_rescan_cpus(void);
#else
#define _raw_read_relax(lock) cpu_relax()
#define _raw_write_relax(lock) cpu_relax()
+#define __always_inline__spin_lock
+#define __always_inline__read_lock
+#define __always_inline__write_lock
+#define __always_inline__spin_lock_bh
+#define __always_inline__read_lock_bh
+#define __always_inline__write_lock_bh
+#define __always_inline__spin_lock_irq
+#define __always_inline__read_lock_irq
+#define __always_inline__write_lock_irq
+#define __always_inline__spin_lock_irqsave
+#define __always_inline__read_lock_irqsave
+#define __always_inline__write_lock_irqsave
+#define __always_inline__spin_trylock
+#define __always_inline__read_trylock
+#define __always_inline__write_trylock
+#define __always_inline__spin_trylock_bh
+#define __always_inline__spin_unlock
+#define __always_inline__read_unlock
+#define __always_inline__write_unlock
+#define __always_inline__spin_unlock_bh
+#define __always_inline__read_unlock_bh
+#define __always_inline__write_unlock_bh
+#define __always_inline__spin_unlock_irq
+#define __always_inline__read_unlock_irq
+#define __always_inline__write_unlock_irq
+#define __always_inline__spin_unlock_irqrestore
+#define __always_inline__read_unlock_irqrestore
+#define __always_inline__write_unlock_irqrestore
+
#endif /* __ASM_SPINLOCK_H */
#define pfault_fini() do { } while (0)
#endif /* CONFIG_PFAULT */
-#ifdef CONFIG_PAGE_STATES
extern void cmma_init(void);
-#else
-static inline void cmma_init(void) { }
-#endif
#define finish_arch_switch(prev) do { \
set_fs(current->thread.mm_segment); \
extern u64 sched_clock_base_cc;
+/**
+ * get_clock_monotonic - returns current time in clock rate units
+ *
+ * The caller must ensure that preemption is disabled.
+ * The clock and sched_clock_base get changed via stop_machine.
+ * Therefore preemption must be disabled when calling this
+ * function, otherwise the returned value is not guaranteed to
+ * be monotonic.
+ */
+static inline unsigned long long get_clock_monotonic(void)
+{
+ return get_clock_xt() - sched_clock_base_cc;
+}
+
#endif
* pte_free_tlb frees a pte table and clears the CRSTE for the
* page table from the tlb.
*/
-static inline void pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte)
+static inline void pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
+ unsigned long address)
{
if (!tlb->fullmm) {
tlb->array[tlb->nr_ptes++] = pte;
* as the pgd. pmd_free_tlb checks the asce_limit against 2GB
* to avoid the double free of the pmd in this case.
*/
-static inline void pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
+static inline void pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd,
+ unsigned long address)
{
#ifdef __s390x__
if (tlb->mm->context.asce_limit <= (1UL << 31))
* as the pgd. pud_free_tlb checks the asce_limit against 4TB
* to avoid the double free of the pud in this case.
*/
-static inline void pud_free_tlb(struct mmu_gather *tlb, pud_t *pud)
+static inline void pud_free_tlb(struct mmu_gather *tlb, pud_t *pud,
+ unsigned long address)
{
#ifdef __s390x__
if (tlb->mm->context.asce_limit <= (1UL << 42))
obj-$(CONFIG_MODULES) += s390_ksyms.o module.o
obj-$(CONFIG_SMP) += smp.o topology.o
-
+obj-$(CONFIG_HIBERNATION) += suspend.o swsusp_asm64.o
obj-$(CONFIG_AUDIT) += audit.o
compat-obj-$(CONFIG_AUDIT) += compat_audit.o
obj-$(CONFIG_COMPAT) += compat_linux.o compat_signal.o \
obj-$(CONFIG_STACKTRACE) += stacktrace.o
obj-$(CONFIG_KPROBES) += kprobes.o
-obj-$(CONFIG_FUNCTION_TRACER) += mcount.o
+obj-$(CONFIG_FUNCTION_TRACER) += $(if $(CONFIG_64BIT),mcount64.o,mcount.o)
obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
* Heiko Carstens <heiko.carstens@de.ibm.com>
*/
+#define KMSG_COMPONENT "setup"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
#include <linux/compiler.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/pfn.h>
#include <linux/uaccess.h>
+#include <linux/kernel.h>
#include <asm/ebcdic.h>
#include <asm/ipl.h>
#include <asm/lowcore.h>
char kernel_nss_name[NSS_NAME_SIZE + 1];
-static unsigned long machine_flags;
-
static void __init setup_boot_command_line(void);
/*
" br 14\n"
" .size savesys_ipl_nss, .-savesys_ipl_nss\n");
+static __initdata char upper_command_line[COMMAND_LINE_SIZE];
+
static noinline __init void create_kernel_nss(void)
{
unsigned int i, stext_pfn, eshared_pfn, end_pfn, min_size;
int response;
size_t len;
char *savesys_ptr;
- char upper_command_line[COMMAND_LINE_SIZE];
char defsys_cmd[DEFSYS_CMD_SIZE];
char savesys_cmd[SAVESYS_CMD_SIZE];
__cpcmd(defsys_cmd, NULL, 0, &response);
if (response != 0) {
+ pr_err("Defining the Linux kernel NSS failed with rc=%d\n",
+ response);
kernel_nss_name[0] = '\0';
return;
}
* max SAVESYS_CMD_SIZE
* On error: response contains the numeric portion of cp error message.
* for SAVESYS it will be >= 263
+ * for missing privilege class, it will be 1
*/
- if (response > SAVESYS_CMD_SIZE) {
+ if (response > SAVESYS_CMD_SIZE || response == 1) {
+ pr_err("Saving the Linux kernel NSS failed with rc=%d\n",
+ response);
kernel_nss_name[0] = '\0';
return;
}
/* Running under KVM? If not we assume z/VM */
if (!memcmp(vmms.vm[0].cpi, "\xd2\xe5\xd4", 3))
- machine_flags |= MACHINE_FLAG_KVM;
+ S390_lowcore.machine_flags |= MACHINE_FLAG_KVM;
else
- machine_flags |= MACHINE_FLAG_VM;
+ S390_lowcore.machine_flags |= MACHINE_FLAG_VM;
}
-static void early_pgm_check_handler(void)
+static __init void early_pgm_check_handler(void)
{
unsigned long addr;
const struct exception_table_entry *fixup;
S390_lowcore.program_old_psw.addr = fixup->fixup | PSW_ADDR_AMODE;
}
-void setup_lowcore_early(void)
+static noinline __init void setup_lowcore_early(void)
{
psw_t psw;
facilities = stfl();
if (!(facilities & (1UL << 23)) || !(facilities & (1UL << 29)))
return;
- machine_flags |= MACHINE_FLAG_HPAGE;
+ S390_lowcore.machine_flags |= MACHINE_FLAG_HPAGE;
__ctl_set_bit(0, 23);
#endif
}
EX_TABLE(0b,1b)
: "=d" (rc) : "0" (-EOPNOTSUPP), "a" (0) : "memory", "cc", "0");
if (!rc)
- machine_flags |= MACHINE_FLAG_MVPG;
+ S390_lowcore.machine_flags |= MACHINE_FLAG_MVPG;
#endif
}
EX_TABLE(0b,1b)
: "=d" (rc), "=d" (tmp): "0" (-EOPNOTSUPP) : "cc");
if (!rc)
- machine_flags |= MACHINE_FLAG_IEEE;
+ S390_lowcore.machine_flags |= MACHINE_FLAG_IEEE;
#endif
}
EX_TABLE(0b,1b)
: "=d" (rc) : "0" (-EOPNOTSUPP) : "cc", "0", "1", "2");
if (!rc)
- machine_flags |= MACHINE_FLAG_CSP;
+ S390_lowcore.machine_flags |= MACHINE_FLAG_CSP;
#endif
}
EX_TABLE(0b,1b)
: "=d" (rc) : "0" (-EOPNOTSUPP), "d" (cpu_address) : "cc");
if (!rc)
- machine_flags |= MACHINE_FLAG_DIAG9C;
+ S390_lowcore.machine_flags |= MACHINE_FLAG_DIAG9C;
}
static __init void detect_diag44(void)
EX_TABLE(0b,1b)
: "=d" (rc) : "0" (-EOPNOTSUPP) : "cc");
if (!rc)
- machine_flags |= MACHINE_FLAG_DIAG44;
+ S390_lowcore.machine_flags |= MACHINE_FLAG_DIAG44;
#endif
}
facilities = stfl();
if (facilities & (1 << 28))
- machine_flags |= MACHINE_FLAG_IDTE;
+ S390_lowcore.machine_flags |= MACHINE_FLAG_IDTE;
if (facilities & (1 << 23))
- machine_flags |= MACHINE_FLAG_PFMF;
+ S390_lowcore.machine_flags |= MACHINE_FLAG_PFMF;
if (facilities & (1 << 4))
- machine_flags |= MACHINE_FLAG_MVCOS;
+ S390_lowcore.machine_flags |= MACHINE_FLAG_MVCOS;
#endif
}
}
/* Set up boot command line */
-static void __init setup_boot_command_line(void)
+static void __init append_to_cmdline(size_t (*ipl_data)(char *, size_t))
{
- char *parm = NULL;
+ char *parm, *delim;
+ size_t rc, len;
+ len = strlen(boot_command_line);
+
+ delim = boot_command_line + len; /* '\0' character position */
+ parm = boot_command_line + len + 1; /* append right after '\0' */
+
+ rc = ipl_data(parm, COMMAND_LINE_SIZE - len - 1);
+ if (rc) {
+ if (*parm == '=')
+ memmove(boot_command_line, parm + 1, rc);
+ else
+ *delim = ' '; /* replace '\0' with space */
+ }
+}
+
+static void __init setup_boot_command_line(void)
+{
/* copy arch command line */
strlcpy(boot_command_line, COMMAND_LINE, ARCH_COMMAND_LINE_SIZE);
/* append IPL PARM data to the boot command line */
- if (MACHINE_IS_VM) {
- parm = boot_command_line + strlen(boot_command_line);
- *parm++ = ' ';
- get_ipl_vmparm(parm);
- if (parm[0] == '=')
- memmove(boot_command_line, parm + 1, strlen(parm));
- }
+ if (MACHINE_IS_VM)
+ append_to_cmdline(append_ipl_vmparm);
+
+ append_to_cmdline(append_ipl_scpdata);
}
setup_hpage();
sclp_facilities_detect();
detect_memory_layout(memory_chunk);
- S390_lowcore.machine_flags = machine_flags;
#ifdef CONFIG_DYNAMIC_FTRACE
S390_lowcore.ftrace_func = (unsigned long)ftrace_caller;
#endif
bnz BASED(sysc_work) # there is work to do (signals etc.)
sysc_restore:
#ifdef CONFIG_TRACE_IRQFLAGS
- la %r1,BASED(sysc_restore_trace_psw)
+ la %r1,BASED(sysc_restore_trace_psw_addr)
+ l %r1,0(%r1)
lpsw 0(%r1)
sysc_restore_trace:
TRACE_IRQS_CHECK
sysc_done:
#ifdef CONFIG_TRACE_IRQFLAGS
+sysc_restore_trace_psw_addr:
+ .long sysc_restore_trace_psw
+
+ .section .data,"aw",@progbits
.align 8
.globl sysc_restore_trace_psw
sysc_restore_trace_psw:
.long 0, sysc_restore_trace + 0x80000000
+ .previous
#endif
#
bnz BASED(io_work) # there is work to do (signals etc.)
io_restore:
#ifdef CONFIG_TRACE_IRQFLAGS
- la %r1,BASED(io_restore_trace_psw)
+ la %r1,BASED(io_restore_trace_psw_addr)
+ l %r1,0(%r1)
lpsw 0(%r1)
io_restore_trace:
TRACE_IRQS_CHECK
io_done:
#ifdef CONFIG_TRACE_IRQFLAGS
+io_restore_trace_psw_addr:
+ .long io_restore_trace_psw
+
+ .section .data,"aw",@progbits
.align 8
.globl io_restore_trace_psw
io_restore_trace_psw:
.long 0, io_restore_trace + 0x80000000
+ .previous
#endif
#
sysc_done:
#ifdef CONFIG_TRACE_IRQFLAGS
+ .section .data,"aw",@progbits
.align 8
.globl sysc_restore_trace_psw
sysc_restore_trace_psw:
.quad 0, sysc_restore_trace
+ .previous
#endif
#
io_done:
#ifdef CONFIG_TRACE_IRQFLAGS
+ .section .data,"aw",@progbits
.align 8
.globl io_restore_trace_psw
io_restore_trace_psw:
.quad 0, io_restore_trace
+ .previous
#endif
#
#include <asm/asm-offsets.h>
#include <asm/thread_info.h>
#include <asm/page.h>
+#include <asm/cpu.h>
#ifdef CONFIG_64BIT
#define ARCH_OFFSET 4
# Setup stack
#
l %r15,.Linittu-.LPG1(%r13)
+ st %r15,__LC_THREAD_INFO # cache thread info in lowcore
mvc __LC_CURRENT(4),__TI_task(%r15)
ahi %r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union+THREAD_SIZE
st %r15,__LC_KERNEL_STACK # set end of kernel stack
clr %r11,%r12
je 5f # no more space in prefix array
4:
- ahi %r8,1 # next cpu (r8 += 1)
- cl %r8,.Llast_cpu-.LPG1(%r13) # is last possible cpu ?
- jl 1b # jump if not last cpu
+ ahi %r8,1 # next cpu (r8 += 1)
+ chi %r8,MAX_CPU_ADDRESS # is last possible cpu ?
+ jle 1b # jump if not last cpu
5:
lhi %r1,2 # mode 2 = esame (dump)
j 6f
# Setup stack
#
larl %r15,init_thread_union
+ stg %r15,__LC_THREAD_INFO # cache thread info in lowcore
lg %r14,__TI_task(%r15) # cache current in lowcore
stg %r14,__LC_CURRENT
aghi %r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union + THREAD_SIZE
#ifdef CONFIG_ZFCPDUMP
.Lcurrent_cpu:
.long 0x0
-.Llast_cpu:
- .long 0x0000ffff
.Lpref_arr_ptr:
.long zfcpdump_prefix_array
#endif /* CONFIG_ZFCPDUMP */
static struct kobj_attribute sys_ipl_type_attr = __ATTR_RO(ipl_type);
/* VM IPL PARM routines */
-static void reipl_get_ascii_vmparm(char *dest,
+size_t reipl_get_ascii_vmparm(char *dest, size_t size,
const struct ipl_parameter_block *ipb)
{
int i;
- int len = 0;
+ size_t len;
char has_lowercase = 0;
+ len = 0;
if ((ipb->ipl_info.ccw.vm_flags & DIAG308_VM_FLAGS_VP_VALID) &&
(ipb->ipl_info.ccw.vm_parm_len > 0)) {
- len = ipb->ipl_info.ccw.vm_parm_len;
+ len = min_t(size_t, size - 1, ipb->ipl_info.ccw.vm_parm_len);
memcpy(dest, ipb->ipl_info.ccw.vm_parm, len);
/* If at least one character is lowercase, we assume mixed
* case; otherwise we convert everything to lowercase.
EBCASC(dest, len);
}
dest[len] = 0;
+
+ return len;
}
-void get_ipl_vmparm(char *dest)
+size_t append_ipl_vmparm(char *dest, size_t size)
{
+ size_t rc;
+
+ rc = 0;
if (diag308_set_works && (ipl_block.hdr.pbt == DIAG308_IPL_TYPE_CCW))
- reipl_get_ascii_vmparm(dest, &ipl_block);
+ rc = reipl_get_ascii_vmparm(dest, size, &ipl_block);
else
dest[0] = 0;
+ return rc;
}
static ssize_t ipl_vm_parm_show(struct kobject *kobj,
{
char parm[DIAG308_VMPARM_SIZE + 1] = {};
- get_ipl_vmparm(parm);
+ append_ipl_vmparm(parm, sizeof(parm));
return sprintf(page, "%s\n", parm);
}
+static size_t scpdata_length(const char* buf, size_t count)
+{
+ while (count) {
+ if (buf[count - 1] != '\0' && buf[count - 1] != ' ')
+ break;
+ count--;
+ }
+ return count;
+}
+
+size_t reipl_append_ascii_scpdata(char *dest, size_t size,
+ const struct ipl_parameter_block *ipb)
+{
+ size_t count;
+ size_t i;
+ int has_lowercase;
+
+ count = min(size - 1, scpdata_length(ipb->ipl_info.fcp.scp_data,
+ ipb->ipl_info.fcp.scp_data_len));
+ if (!count)
+ goto out;
+
+ has_lowercase = 0;
+ for (i = 0; i < count; i++) {
+ if (!isascii(ipb->ipl_info.fcp.scp_data[i])) {
+ count = 0;
+ goto out;
+ }
+ if (!has_lowercase && islower(ipb->ipl_info.fcp.scp_data[i]))
+ has_lowercase = 1;
+ }
+
+ if (has_lowercase)
+ memcpy(dest, ipb->ipl_info.fcp.scp_data, count);
+ else
+ for (i = 0; i < count; i++)
+ dest[i] = tolower(ipb->ipl_info.fcp.scp_data[i]);
+out:
+ dest[count] = '\0';
+ return count;
+}
+
+size_t append_ipl_scpdata(char *dest, size_t len)
+{
+ size_t rc;
+
+ rc = 0;
+ if (ipl_block.hdr.pbt == DIAG308_IPL_TYPE_FCP)
+ rc = reipl_append_ascii_scpdata(dest, len, &ipl_block);
+ else
+ dest[0] = 0;
+ return rc;
+}
+
+
static struct kobj_attribute sys_ipl_vm_parm_attr =
__ATTR(parm, S_IRUGO, ipl_vm_parm_show, NULL);
{
char vmparm[DIAG308_VMPARM_SIZE + 1] = {};
- reipl_get_ascii_vmparm(vmparm, ipb);
+ reipl_get_ascii_vmparm(vmparm, sizeof(vmparm), ipb);
return sprintf(page, "%s\n", vmparm);
}
/* FCP reipl device attributes */
+static ssize_t reipl_fcp_scpdata_read(struct kobject *kobj,
+ struct bin_attribute *attr,
+ char *buf, loff_t off, size_t count)
+{
+ size_t size = reipl_block_fcp->ipl_info.fcp.scp_data_len;
+ void *scp_data = reipl_block_fcp->ipl_info.fcp.scp_data;
+
+ return memory_read_from_buffer(buf, count, &off, scp_data, size);
+}
+
+static ssize_t reipl_fcp_scpdata_write(struct kobject *kobj,
+ struct bin_attribute *attr,
+ char *buf, loff_t off, size_t count)
+{
+ size_t padding;
+ size_t scpdata_len;
+
+ if (off < 0)
+ return -EINVAL;
+
+ if (off >= DIAG308_SCPDATA_SIZE)
+ return -ENOSPC;
+
+ if (count > DIAG308_SCPDATA_SIZE - off)
+ count = DIAG308_SCPDATA_SIZE - off;
+
+ memcpy(reipl_block_fcp->ipl_info.fcp.scp_data, buf + off, count);
+ scpdata_len = off + count;
+
+ if (scpdata_len % 8) {
+ padding = 8 - (scpdata_len % 8);
+ memset(reipl_block_fcp->ipl_info.fcp.scp_data + scpdata_len,
+ 0, padding);
+ scpdata_len += padding;
+ }
+
+ reipl_block_fcp->ipl_info.fcp.scp_data_len = scpdata_len;
+ reipl_block_fcp->hdr.len = IPL_PARM_BLK_FCP_LEN + scpdata_len;
+ reipl_block_fcp->hdr.blk0_len = IPL_PARM_BLK0_FCP_LEN + scpdata_len;
+
+ return count;
+}
+
+static struct bin_attribute sys_reipl_fcp_scp_data_attr = {
+ .attr = {
+ .name = "scp_data",
+ .mode = S_IRUGO | S_IWUSR,
+ },
+ .size = PAGE_SIZE,
+ .read = reipl_fcp_scpdata_read,
+ .write = reipl_fcp_scpdata_write,
+};
+
DEFINE_IPL_ATTR_RW(reipl_fcp, wwpn, "0x%016llx\n", "%016llx\n",
reipl_block_fcp->ipl_info.fcp.wwpn);
DEFINE_IPL_ATTR_RW(reipl_fcp, lun, "0x%016llx\n", "%016llx\n",
};
static struct attribute_group reipl_fcp_attr_group = {
- .name = IPL_FCP_STR,
.attrs = reipl_fcp_attrs,
};
__ATTR(reipl_type, 0644, reipl_type_show, reipl_type_store);
static struct kset *reipl_kset;
+static struct kset *reipl_fcp_kset;
static void get_ipl_string(char *dst, struct ipl_parameter_block *ipb,
const enum ipl_method m)
reipl_get_ascii_loadparm(loadparm, ipb);
reipl_get_ascii_nss_name(nss_name, ipb);
- reipl_get_ascii_vmparm(vmparm, ipb);
+ reipl_get_ascii_vmparm(vmparm, sizeof(vmparm), ipb);
switch (m) {
case REIPL_METHOD_CCW_VM:
int rc;
if (!diag308_set_works) {
- if (ipl_info.type == IPL_TYPE_FCP)
+ if (ipl_info.type == IPL_TYPE_FCP) {
make_attrs_ro(reipl_fcp_attrs);
- else
+ sys_reipl_fcp_scp_data_attr.attr.mode = S_IRUGO;
+ } else
return 0;
}
reipl_block_fcp = (void *) get_zeroed_page(GFP_KERNEL);
if (!reipl_block_fcp)
return -ENOMEM;
- rc = sysfs_create_group(&reipl_kset->kobj, &reipl_fcp_attr_group);
+
+ /* sysfs: create fcp kset for mixing attr group and bin attrs */
+ reipl_fcp_kset = kset_create_and_add(IPL_FCP_STR, NULL,
+ &reipl_kset->kobj);
+ if (!reipl_kset) {
+ free_page((unsigned long) reipl_block_fcp);
+ return -ENOMEM;
+ }
+
+ rc = sysfs_create_group(&reipl_fcp_kset->kobj, &reipl_fcp_attr_group);
+ if (rc) {
+ kset_unregister(reipl_fcp_kset);
+ free_page((unsigned long) reipl_block_fcp);
+ return rc;
+ }
+
+ rc = sysfs_create_bin_file(&reipl_fcp_kset->kobj,
+ &sys_reipl_fcp_scp_data_attr);
if (rc) {
- free_page((unsigned long)reipl_block_fcp);
+ sysfs_remove_group(&reipl_fcp_kset->kobj, &reipl_fcp_attr_group);
+ kset_unregister(reipl_fcp_kset);
+ free_page((unsigned long) reipl_block_fcp);
return rc;
}
- if (ipl_info.type == IPL_TYPE_FCP) {
+
+ if (ipl_info.type == IPL_TYPE_FCP)
memcpy(reipl_block_fcp, IPL_PARMBLOCK_START, PAGE_SIZE);
- } else {
+ else {
reipl_block_fcp->hdr.len = IPL_PARM_BLK_FCP_LEN;
reipl_block_fcp->hdr.version = IPL_PARM_BLOCK_VERSION;
reipl_block_fcp->hdr.blk0_len = IPL_PARM_BLK0_FCP_LEN;
ftrace_stub:
br %r14
-#ifdef CONFIG_64BIT
-
-#ifdef CONFIG_DYNAMIC_FTRACE
-
.globl _mcount
_mcount:
- br %r14
-
- .globl ftrace_caller
-ftrace_caller:
- larl %r1,function_trace_stop
- icm %r1,0xf,0(%r1)
- bnzr %r14
- stmg %r2,%r5,32(%r15)
- stg %r14,112(%r15)
- lgr %r1,%r15
- aghi %r15,-160
- stg %r1,__SF_BACKCHAIN(%r15)
- lgr %r2,%r14
- lg %r3,168(%r15)
- larl %r14,ftrace_dyn_func
- lg %r14,0(%r14)
- basr %r14,%r14
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
- .globl ftrace_graph_caller
-ftrace_graph_caller:
- # This unconditional branch gets runtime patched. Change only if
- # you know what you are doing. See ftrace_enable_graph_caller().
- j 0f
- lg %r2,272(%r15)
- lg %r3,168(%r15)
- brasl %r14,prepare_ftrace_return
- stg %r2,168(%r15)
-0:
-#endif
- aghi %r15,160
- lmg %r2,%r5,32(%r15)
- lg %r14,112(%r15)
+#ifdef CONFIG_DYNAMIC_FTRACE
br %r14
.data
.globl ftrace_dyn_func
ftrace_dyn_func:
- .quad ftrace_stub
+ .long ftrace_stub
.previous
-#else /* CONFIG_DYNAMIC_FTRACE */
-
- .globl _mcount
-_mcount:
- larl %r1,function_trace_stop
- icm %r1,0xf,0(%r1)
- bnzr %r14
- stmg %r2,%r5,32(%r15)
- stg %r14,112(%r15)
- lgr %r1,%r15
- aghi %r15,-160
- stg %r1,__SF_BACKCHAIN(%r15)
- lgr %r2,%r14
- lg %r3,168(%r15)
- larl %r14,ftrace_trace_function
- lg %r14,0(%r14)
- basr %r14,%r14
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
- lg %r2,272(%r15)
- lg %r3,168(%r15)
- brasl %r14,prepare_ftrace_return
- stg %r2,168(%r15)
-#endif
- aghi %r15,160
- lmg %r2,%r5,32(%r15)
- lg %r14,112(%r15)
- br %r14
-
-#endif /* CONFIG_DYNAMIC_FTRACE */
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-
- .globl return_to_handler
-return_to_handler:
- stmg %r2,%r5,32(%r15)
- lgr %r1,%r15
- aghi %r15,-160
- stg %r1,__SF_BACKCHAIN(%r15)
- brasl %r14,ftrace_return_to_handler
- aghi %r15,160
- lgr %r14,%r2
- lmg %r2,%r5,32(%r15)
- br %r14
-
-#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
-
-#else /* CONFIG_64BIT */
-
-#ifdef CONFIG_DYNAMIC_FTRACE
-
- .globl _mcount
-_mcount:
- br %r14
-
.globl ftrace_caller
ftrace_caller:
+#endif
stm %r2,%r5,16(%r15)
bras %r1,2f
+#ifdef CONFIG_DYNAMIC_FTRACE
+0: .long ftrace_dyn_func
+#else
0: .long ftrace_trace_function
+#endif
1: .long function_trace_stop
2: l %r2,1b-0b(%r1)
icm %r2,0xf,0(%r2)
l %r14,0(%r14)
basr %r14,%r14
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+#ifdef CONFIG_DYNAMIC_FTRACE
.globl ftrace_graph_caller
ftrace_graph_caller:
# This unconditional branch gets runtime patched. Change only if
# you know what you are doing. See ftrace_enable_graph_caller().
j 1f
- bras %r1,0f
- .long prepare_ftrace_return
-0: l %r2,152(%r15)
- l %r4,0(%r1)
- l %r3,100(%r15)
- basr %r14,%r4
- st %r2,100(%r15)
-1:
#endif
- ahi %r15,96
- l %r14,56(%r15)
-3: lm %r2,%r5,16(%r15)
- br %r14
-
- .data
- .globl ftrace_dyn_func
-ftrace_dyn_func:
- .long ftrace_stub
- .previous
-
-#else /* CONFIG_DYNAMIC_FTRACE */
-
- .globl _mcount
-_mcount:
- stm %r2,%r5,16(%r15)
- bras %r1,2f
-0: .long ftrace_trace_function
-1: .long function_trace_stop
-2: l %r2,1b-0b(%r1)
- icm %r2,0xf,0(%r2)
- jnz 3f
- st %r14,56(%r15)
- lr %r0,%r15
- ahi %r15,-96
- l %r3,100(%r15)
- la %r2,0(%r14)
- st %r0,__SF_BACKCHAIN(%r15)
- la %r3,0(%r3)
- l %r14,0b-0b(%r1)
- l %r14,0(%r14)
- basr %r14,%r14
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
bras %r1,0f
.long prepare_ftrace_return
0: l %r2,152(%r15)
l %r3,100(%r15)
basr %r14,%r4
st %r2,100(%r15)
+1:
#endif
ahi %r15,96
l %r14,56(%r15)
3: lm %r2,%r5,16(%r15)
br %r14
-#endif /* CONFIG_DYNAMIC_FTRACE */
-
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
.globl return_to_handler
lm %r2,%r5,16(%r15)
br %r14
-#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
-
-#endif /* CONFIG_64BIT */
+#endif
--- /dev/null
+/*
+ * Copyright IBM Corp. 2008,2009
+ *
+ * Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>,
+ *
+ */
+
+#include <asm/asm-offsets.h>
+
+ .globl ftrace_stub
+ftrace_stub:
+ br %r14
+
+ .globl _mcount
+_mcount:
+#ifdef CONFIG_DYNAMIC_FTRACE
+ br %r14
+
+ .data
+ .globl ftrace_dyn_func
+ftrace_dyn_func:
+ .quad ftrace_stub
+ .previous
+
+ .globl ftrace_caller
+ftrace_caller:
+#endif
+ larl %r1,function_trace_stop
+ icm %r1,0xf,0(%r1)
+ bnzr %r14
+ stmg %r2,%r5,32(%r15)
+ stg %r14,112(%r15)
+ lgr %r1,%r15
+ aghi %r15,-160
+ stg %r1,__SF_BACKCHAIN(%r15)
+ lgr %r2,%r14
+ lg %r3,168(%r15)
+#ifdef CONFIG_DYNAMIC_FTRACE
+ larl %r14,ftrace_dyn_func
+#else
+ larl %r14,ftrace_trace_function
+#endif
+ lg %r14,0(%r14)
+ basr %r14,%r14
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+#ifdef CONFIG_DYNAMIC_FTRACE
+ .globl ftrace_graph_caller
+ftrace_graph_caller:
+ # This unconditional branch gets runtime patched. Change only if
+ # you know what you are doing. See ftrace_enable_graph_caller().
+ j 0f
+#endif
+ lg %r2,272(%r15)
+ lg %r3,168(%r15)
+ brasl %r14,prepare_ftrace_return
+ stg %r2,168(%r15)
+0:
+#endif
+ aghi %r15,160
+ lmg %r2,%r5,32(%r15)
+ lg %r14,112(%r15)
+ br %r14
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+
+ .globl return_to_handler
+return_to_handler:
+ stmg %r2,%r5,32(%r15)
+ lgr %r1,%r15
+ aghi %r15,-160
+ stg %r1,__SF_BACKCHAIN(%r15)
+ brasl %r14,ftrace_return_to_handler
+ aghi %r15,160
+ lgr %r14,%r2
+ lmg %r2,%r5,32(%r15)
+ br %r14
+
+#endif
__setup("condev=", condev_setup);
+static void __init set_preferred_console(void)
+{
+ if (MACHINE_IS_KVM)
+ add_preferred_console("hvc", 0, NULL);
+ else if (CONSOLE_IS_3215 || CONSOLE_IS_SCLP)
+ add_preferred_console("ttyS", 0, NULL);
+ else if (CONSOLE_IS_3270)
+ add_preferred_console("tty3270", 0, NULL);
+}
+
static int __init conmode_setup(char *str)
{
#if defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE)
if (strncmp(str, "3270", 5) == 0)
SET_CONSOLE_3270;
#endif
+ set_preferred_console();
return 1;
}
void __init
setup_arch(char **cmdline_p)
{
- /* set up preferred console */
- add_preferred_console("ttyS", 0, NULL);
-
/*
* print what head.S has found out about the machine
*/
if (MACHINE_IS_VM)
pr_info("Linux is running as a z/VM "
"guest operating system in 64-bit mode\n");
- else if (MACHINE_IS_KVM) {
+ else if (MACHINE_IS_KVM)
pr_info("Linux is running under KVM in 64-bit mode\n");
- add_preferred_console("hvc", 0, NULL);
- s390_virtio_console_init();
- } else
+ else
pr_info("Linux is running natively in 64-bit mode\n");
#endif /* CONFIG_64BIT */
/* Setup default console */
conmode_default();
+ set_preferred_console();
/* Setup zfcpdump support */
setup_zfcpdump(console_devno);
{
clear_thread_flag(TIF_NOTIFY_RESUME);
tracehook_notify_resume(regs);
+ if (current->replacement_session_keyring)
+ key_replace_session_keyring();
}
#include <asm/sclp.h>
#include <asm/cputime.h>
#include <asm/vdso.h>
+#include <asm/cpu.h>
#include "entry.h"
static struct task_struct *current_set[NR_CPUS];
static void smp_ext_bitcall(int, ec_bit_sig);
+static int cpu_stopped(int cpu)
+{
+ __u32 status;
+
+ switch (signal_processor_ps(&status, 0, cpu, sigp_sense)) {
+ case sigp_order_code_accepted:
+ case sigp_status_stored:
+ /* Check for stopped and check stop state */
+ if (status & 0x50)
+ return 1;
+ break;
+ default:
+ break;
+ }
+ return 0;
+}
+
void smp_send_stop(void)
{
int cpu, rc;
rc = signal_processor(cpu, sigp_stop);
} while (rc == sigp_busy);
- while (!smp_cpu_not_running(cpu))
+ while (!cpu_stopped(cpu))
cpu_relax();
}
}
#endif /* CONFIG_ZFCPDUMP */
-static int cpu_stopped(int cpu)
-{
- __u32 status;
-
- /* Check for stopped state */
- if (signal_processor_ps(&status, 0, cpu, sigp_sense) ==
- sigp_status_stored) {
- if (status & 0x40)
- return 1;
- }
- return 0;
-}
-
static int cpu_known(int cpu_id)
{
int cpu;
logical_cpu = cpumask_first(&avail);
if (logical_cpu >= nr_cpu_ids)
return 0;
- for (cpu_id = 0; cpu_id <= 65535; cpu_id++) {
+ for (cpu_id = 0; cpu_id <= MAX_CPU_ADDRESS; cpu_id++) {
if (cpu_known(cpu_id))
continue;
__cpu_logical_map[logical_cpu] = cpu_id;
/* Use sigp detection algorithm if sclp doesn't work. */
if (sclp_get_cpu_info(info)) {
smp_use_sigp_detection = 1;
- for (cpu = 0; cpu <= 65535; cpu++) {
+ for (cpu = 0; cpu <= MAX_CPU_ADDRESS; cpu++) {
if (cpu == boot_cpu_addr)
continue;
__cpu_logical_map[CPU_INIT_NO] = cpu;
void __cpu_die(unsigned int cpu)
{
/* Wait until target cpu is down */
- while (!smp_cpu_not_running(cpu))
+ while (!cpu_stopped(cpu))
cpu_relax();
smp_free_lowcore(cpu);
pr_info("Processor %d stopped\n", cpu);
#ifndef CONFIG_64BIT
if (MACHINE_HAS_IEEE)
lowcore->extended_save_area_addr = (u32) save_area;
-#else
- if (vdso_alloc_per_cpu(smp_processor_id(), lowcore))
- BUG();
#endif
set_prefix((u32)(unsigned long) lowcore);
local_mcck_enable();
local_irq_enable();
+#ifdef CONFIG_64BIT
+ if (vdso_alloc_per_cpu(smp_processor_id(), &S390_lowcore))
+ BUG();
+#endif
for_each_possible_cpu(cpu)
if (cpu != smp_processor_id())
smp_create_idle(cpu);
--- /dev/null
+/*
+ * Suspend support specific for s390.
+ *
+ * Copyright IBM Corp. 2009
+ *
+ * Author(s): Hans-Joachim Picht <hans@linux.vnet.ibm.com>
+ */
+
+#include <linux/suspend.h>
+#include <linux/reboot.h>
+#include <linux/pfn.h>
+#include <linux/mm.h>
+#include <asm/sections.h>
+#include <asm/system.h>
+#include <asm/ipl.h>
+
+/*
+ * References to section boundaries
+ */
+extern const void __nosave_begin, __nosave_end;
+
+/*
+ * check if given pfn is in the 'nosave' or in the read only NSS section
+ */
+int pfn_is_nosave(unsigned long pfn)
+{
+ unsigned long nosave_begin_pfn = __pa(&__nosave_begin) >> PAGE_SHIFT;
+ unsigned long nosave_end_pfn = PAGE_ALIGN(__pa(&__nosave_end))
+ >> PAGE_SHIFT;
+ unsigned long eshared_pfn = PFN_DOWN(__pa(&_eshared)) - 1;
+ unsigned long stext_pfn = PFN_DOWN(__pa(&_stext));
+
+ if (pfn >= nosave_begin_pfn && pfn < nosave_end_pfn)
+ return 1;
+ if (pfn >= stext_pfn && pfn <= eshared_pfn) {
+ if (ipl_info.type == IPL_TYPE_NSS)
+ return 1;
+ } else if ((tprot(pfn * PAGE_SIZE) && pfn > 0))
+ return 1;
+ return 0;
+}
+
+void save_processor_state(void)
+{
+ /* swsusp_arch_suspend() actually saves all cpu register contents.
+ * Machine checks must be disabled since swsusp_arch_suspend() stores
+ * register contents to their lowcore save areas. That's the same
+ * place where register contents on machine checks would be saved.
+ * To avoid register corruption disable machine checks.
+ * We must also disable machine checks in the new psw mask for
+ * program checks, since swsusp_arch_suspend() may generate program
+ * checks. Disabling machine checks for all other new psw masks is
+ * just paranoia.
+ */
+ local_mcck_disable();
+ /* Disable lowcore protection */
+ __ctl_clear_bit(0,28);
+ S390_lowcore.external_new_psw.mask &= ~PSW_MASK_MCHECK;
+ S390_lowcore.svc_new_psw.mask &= ~PSW_MASK_MCHECK;
+ S390_lowcore.io_new_psw.mask &= ~PSW_MASK_MCHECK;
+ S390_lowcore.program_new_psw.mask &= ~PSW_MASK_MCHECK;
+}
+
+void restore_processor_state(void)
+{
+ S390_lowcore.external_new_psw.mask |= PSW_MASK_MCHECK;
+ S390_lowcore.svc_new_psw.mask |= PSW_MASK_MCHECK;
+ S390_lowcore.io_new_psw.mask |= PSW_MASK_MCHECK;
+ S390_lowcore.program_new_psw.mask |= PSW_MASK_MCHECK;
+ /* Enable lowcore protection */
+ __ctl_set_bit(0,28);
+ local_mcck_enable();
+}
* This function runs with disabled interrupts.
*/
.section .text
- .align 2
+ .align 4
.globl swsusp_arch_suspend
swsusp_arch_suspend:
stmg %r6,%r15,__SF_GPRS(%r15)
/* Deactivate DAT */
stnsm __SF_EMPTY(%r15),0xfb
- /* Switch off lowcore protection */
- stctg %c0,%c0,__SF_EMPTY(%r15)
- ni __SF_EMPTY+4(%r15),0xef
- lctlg %c0,%c0,__SF_EMPTY(%r15)
-
/* Store prefix register on stack */
stpx __SF_EMPTY(%r15)
- /* Setup base register for lowcore (absolute 0) */
- llgf %r1,__SF_EMPTY(%r15)
+ /* Save prefix register contents for lowcore */
+ llgf %r4,__SF_EMPTY(%r15)
/* Get pointer to save area */
- aghi %r1,0x1000
+ lghi %r1,0x1000
/* Store registers */
mvc 0x318(4,%r1),__SF_EMPTY(%r15) /* move prefix to lowcore */
xc __SF_EMPTY(4,%r15),__SF_EMPTY(%r15)
spx __SF_EMPTY(%r15)
- /* Setup lowcore */
- brasl %r14,setup_lowcore_early
+ lghi %r2,0
+ lghi %r3,2*PAGE_SIZE
+ lghi %r5,2*PAGE_SIZE
+1: mvcle %r2,%r4,0
+ jo 1b
/* Save image */
brasl %r14,swsusp_save
- /* Switch on lowcore protection */
- stctg %c0,%c0,__SF_EMPTY(%r15)
- oi __SF_EMPTY+4(%r15),0x10
- lctlg %c0,%c0,__SF_EMPTY(%r15)
-
/* Restore prefix register and return */
lghi %r1,0x1000
spx 0x318(%r1)
/* Deactivate DAT */
stnsm __SF_EMPTY(%r15),0xfb
- /* Switch off lowcore protection */
- stctg %c0,%c0,__SF_EMPTY(%r15)
- ni __SF_EMPTY+4(%r15),0xef
- lctlg %c0,%c0,__SF_EMPTY(%r15)
-
/* Set prefix page to zero */
xc __SF_EMPTY(4,%r15),__SF_EMPTY(%r15)
spx __SF_EMPTY(%r15)
/* Load old stack */
lg %r15,0x2f8(%r13)
- /* Pointer to save arae */
+ /* Pointer to save area */
lghi %r13,0x1000
#ifdef CONFIG_SMP
/* Restore prefix register */
spx 0x318(%r13)
- /* Switch on lowcore protection */
- stctg %c0,%c0,__SF_EMPTY(%r15)
- oi __SF_EMPTY+4(%r15),0x10
- lctlg %c0,%c0,__SF_EMPTY(%r15)
-
/* Activate DAT */
stosm __SF_EMPTY(%r15),0x04
#define TICK_SIZE tick
u64 sched_clock_base_cc = -1; /* Force to data section. */
+EXPORT_SYMBOL_GPL(sched_clock_base_cc);
static DEFINE_PER_CPU(struct clock_event_device, comparators);
*/
unsigned long long notrace sched_clock(void)
{
- return ((get_clock_xt() - sched_clock_base_cc) * 125) >> 9;
+ return (get_clock_monotonic() * 125) >> 9;
}
/*
llilh %r4,0x0100
sar %a4,%r4
lghi %r4,0
+ epsw %r5,0
sacf 512 /* Magic ectg instruction */
.insn ssf,0xc80100000000,__VDSO_ECTG_BASE(4),__VDSO_ECTG_USER(4),4
- sacf 0
- sar %a4,%r2
+ tml %r5,0x4000
+ jo 11f
+ tml %r5,0x8000
+ jno 10f
+ sacf 256
+ j 11f
+10: sacf 0
+11: sar %a4,%r2
algr %r1,%r0 /* r1 = cputime as TOD value */
mghi %r1,1000 /* convert to nanoseconds */
srlg %r1,%r1,12 /* r1 = cputime in nanosec */
. = ALIGN(PAGE_SIZE);
_eshared = .; /* End of shareable data */
- . = ALIGN(16); /* Exception table */
- __ex_table : {
- __start___ex_table = .;
- *(__ex_table)
- __stop___ex_table = .;
- } :data
-
- .data : { /* Data */
- DATA_DATA
- CONSTRUCTORS
- }
-
- . = ALIGN(PAGE_SIZE);
- .data_nosave : {
- __nosave_begin = .;
- *(.data.nosave)
- }
- . = ALIGN(PAGE_SIZE);
- __nosave_end = .;
-
- . = ALIGN(PAGE_SIZE);
- .data.page_aligned : {
- *(.data.idt)
- }
+ EXCEPTION_TABLE(16) :data
- . = ALIGN(0x100);
- .data.cacheline_aligned : {
- *(.data.cacheline_aligned)
- }
+ RW_DATA_SECTION(0x100, PAGE_SIZE, THREAD_SIZE)
- . = ALIGN(0x100);
- .data.read_mostly : {
- *(.data.read_mostly)
- }
_edata = .; /* End of data section */
- . = ALIGN(THREAD_SIZE); /* init_task */
- .data.init_task : {
- *(.data.init_task)
- }
-
/* will be freed after init */
. = ALIGN(PAGE_SIZE); /* Init code and data */
__init_begin = .;
- .init.text : {
- _sinittext = .;
- INIT_TEXT
- _einittext = .;
- }
+
+ INIT_TEXT_SECTION(PAGE_SIZE)
+
/*
* .exit.text is discarded at runtime, not link time,
* to deal with references from __bug_table
/* early.c uses stsi, which requires page aligned data. */
. = ALIGN(PAGE_SIZE);
- .init.data : {
- INIT_DATA
- }
- . = ALIGN(0x100);
- .init.setup : {
- __setup_start = .;
- *(.init.setup)
- __setup_end = .;
- }
- .initcall.init : {
- __initcall_start = .;
- INITCALLS
- __initcall_end = .;
- }
-
- .con_initcall.init : {
- __con_initcall_start = .;
- *(.con_initcall.init)
- __con_initcall_end = .;
- }
- SECURITY_INIT
-
-#ifdef CONFIG_BLK_DEV_INITRD
- . = ALIGN(0x100);
- .init.ramfs : {
- __initramfs_start = .;
- *(.init.ramfs)
- . = ALIGN(2);
- __initramfs_end = .;
- }
-#endif
+ INIT_DATA_SECTION(0x100)
PERCPU(PAGE_SIZE)
. = ALIGN(PAGE_SIZE);
__init_end = .; /* freed after init ends here */
- /* BSS */
- .bss : {
- __bss_start = .;
- *(.bss)
- . = ALIGN(2);
- __bss_stop = .;
- }
+ BSS_SECTION(0, 2, 0)
_end = . ;
}
__unset_cpu_idle(vcpu);
__set_current_state(TASK_RUNNING);
- remove_wait_queue(&vcpu->wq, &wait);
+ remove_wait_queue(&vcpu->arch.local_int.wq, &wait);
spin_unlock_bh(&vcpu->arch.local_int.lock);
spin_unlock(&vcpu->arch.local_int.float_int->lock);
hrtimer_try_to_cancel(&vcpu->arch.ckc_timer);
unsigned long *reg)
{
struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
- struct kvm_s390_local_interrupt *li;
+ struct kvm_s390_local_interrupt *li = NULL;
struct kvm_s390_interrupt_info *inti;
int rc;
u8 tmp;
return 2; /* busy */
spin_lock(&fi->lock);
- li = fi->local_int[cpu_addr];
+ if (cpu_addr < KVM_MAX_VCPUS)
+ li = fi->local_int[cpu_addr];
- if ((cpu_addr >= KVM_MAX_VCPUS) || (li == NULL)) {
+ if (li == NULL) {
rc = 1; /* incorrect state */
*reg &= SIGP_STAT_INCORRECT_STATE;
kfree(inti);
# Makefile for the linux s390-specific parts of the memory manager.
#
-obj-y := init.o fault.o extmem.o mmap.o vmem.o pgtable.o maccess.o
+obj-y := init.o fault.o extmem.o mmap.o vmem.o pgtable.o maccess.o \
+ page-states.o
obj-$(CONFIG_CMM) += cmm.o
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
-obj-$(CONFIG_PAGE_STATES) += page-states.o
* Copyright (C) 1995 Linus Torvalds
*/
+#include <linux/perf_counter.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/kernel.h>
* interrupts again and then search the VMAs
*/
local_irq_enable();
-
+ perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
down_read(&mm->mmap_sem);
si_code = SEGV_MAPERR;
}
BUG();
}
- if (fault & VM_FAULT_MAJOR)
+ if (fault & VM_FAULT_MAJOR) {
tsk->maj_flt++;
- else
+ perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
+ regs, address);
+ } else {
tsk->min_flt++;
-
+ perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
+ regs, address);
+ }
up_read(&mm->mmap_sem);
/*
* The instruction that caused the program check will
/*
- * arch/s390/mm/page-states.c
- *
* Copyright IBM Corp. 2008
*
* Guest page hinting for unused pages.
#define ESSA_SET_STABLE 1
#define ESSA_SET_UNUSED 2
-static int cmma_flag;
+static int cmma_flag = 1;
static int __init cmma(char *str)
{
char *parm;
+
parm = strstrip(str);
if (strcmp(parm, "yes") == 0 || strcmp(parm, "on") == 0) {
cmma_flag = 1;
return 1;
return 0;
}
-
__setup("cmma=", cmma);
void __init cmma_init(void)
}
page->index = page_to_phys(shadow);
}
- spin_lock(&mm->page_table_lock);
+ spin_lock(&mm->context.list_lock);
list_add(&page->lru, &mm->context.crst_list);
- spin_unlock(&mm->page_table_lock);
+ spin_unlock(&mm->context.list_lock);
return (unsigned long *) page_to_phys(page);
}
unsigned long *shadow = get_shadow_table(table);
struct page *page = virt_to_page(table);
- spin_lock(&mm->page_table_lock);
+ spin_lock(&mm->context.list_lock);
list_del(&page->lru);
- spin_unlock(&mm->page_table_lock);
+ spin_unlock(&mm->context.list_lock);
if (shadow)
free_pages((unsigned long) shadow, ALLOC_ORDER);
free_pages((unsigned long) table, ALLOC_ORDER);
unsigned long bits;
bits = (mm->context.noexec || mm->context.has_pgste) ? 3UL : 1UL;
- spin_lock(&mm->page_table_lock);
+ spin_lock(&mm->context.list_lock);
page = NULL;
if (!list_empty(&mm->context.pgtable_list)) {
page = list_first_entry(&mm->context.pgtable_list,
page = NULL;
}
if (!page) {
- spin_unlock(&mm->page_table_lock);
+ spin_unlock(&mm->context.list_lock);
page = alloc_page(GFP_KERNEL|__GFP_REPEAT);
if (!page)
return NULL;
clear_table_pgstes(table);
else
clear_table(table, _PAGE_TYPE_EMPTY, PAGE_SIZE);
- spin_lock(&mm->page_table_lock);
+ spin_lock(&mm->context.list_lock);
list_add(&page->lru, &mm->context.pgtable_list);
}
table = (unsigned long *) page_to_phys(page);
page->flags |= bits;
if ((page->flags & FRAG_MASK) == ((1UL << TABLES_PER_PAGE) - 1))
list_move_tail(&page->lru, &mm->context.pgtable_list);
- spin_unlock(&mm->page_table_lock);
+ spin_unlock(&mm->context.list_lock);
return table;
}
bits = (mm->context.noexec || mm->context.has_pgste) ? 3UL : 1UL;
bits <<= (__pa(table) & (PAGE_SIZE - 1)) / 256 / sizeof(unsigned long);
page = pfn_to_page(__pa(table) >> PAGE_SHIFT);
- spin_lock(&mm->page_table_lock);
+ spin_lock(&mm->context.list_lock);
page->flags ^= bits;
if (page->flags & FRAG_MASK) {
/* Page now has some free pgtable fragments. */
} else
/* All fragments of the 4K page have been freed. */
list_del(&page->lru);
- spin_unlock(&mm->page_table_lock);
+ spin_unlock(&mm->context.list_lock);
if (page) {
pgtable_page_dtor(page);
__free_page(page);
{
struct page *page;
- spin_lock(&mm->page_table_lock);
+ spin_lock(&mm->context.list_lock);
/* Free shadow region and segment tables. */
list_for_each_entry(page, &mm->context.crst_list, lru)
if (page->index) {
/* "Free" second halves of page tables. */
list_for_each_entry(page, &mm->context.pgtable_list, lru)
page->flags &= ~SECOND_HALVES;
- spin_unlock(&mm->page_table_lock);
+ spin_unlock(&mm->context.list_lock);
mm->context.noexec = 0;
update_mm(mm, tsk);
}
unsigned long start, end;
int i;
+ spin_lock_init(&init_mm.context.list_lock);
INIT_LIST_HEAD(&init_mm.context.crst_list);
INIT_LIST_HEAD(&init_mm.context.pgtable_list);
init_mm.context.noexec = 0;
+++ /dev/null
-#
-# Makefile for s390 PM support
-#
-
-obj-$(CONFIG_HIBERNATION) += suspend.o
-obj-$(CONFIG_HIBERNATION) += swsusp.o
-obj-$(CONFIG_HIBERNATION) += swsusp_64.o
-obj-$(CONFIG_HIBERNATION) += swsusp_asm64.o
+++ /dev/null
-/*
- * Suspend support specific for s390.
- *
- * Copyright IBM Corp. 2009
- *
- * Author(s): Hans-Joachim Picht <hans@linux.vnet.ibm.com>
- */
-
-#include <linux/mm.h>
-#include <linux/suspend.h>
-#include <linux/reboot.h>
-#include <linux/pfn.h>
-#include <asm/sections.h>
-#include <asm/ipl.h>
-
-/*
- * References to section boundaries
- */
-extern const void __nosave_begin, __nosave_end;
-
-/*
- * check if given pfn is in the 'nosave' or in the read only NSS section
- */
-int pfn_is_nosave(unsigned long pfn)
-{
- unsigned long nosave_begin_pfn = __pa(&__nosave_begin) >> PAGE_SHIFT;
- unsigned long nosave_end_pfn = PAGE_ALIGN(__pa(&__nosave_end))
- >> PAGE_SHIFT;
- unsigned long eshared_pfn = PFN_DOWN(__pa(&_eshared)) - 1;
- unsigned long stext_pfn = PFN_DOWN(__pa(&_stext));
-
- if (pfn >= nosave_begin_pfn && pfn < nosave_end_pfn)
- return 1;
- if (pfn >= stext_pfn && pfn <= eshared_pfn) {
- if (ipl_info.type == IPL_TYPE_NSS)
- return 1;
- } else if ((tprot(pfn * PAGE_SIZE) && pfn > 0))
- return 1;
- return 0;
-}
+++ /dev/null
-/*
- * Support for suspend and resume on s390
- *
- * Copyright IBM Corp. 2009
- *
- * Author(s): Hans-Joachim Picht <hans@linux.vnet.ibm.com>
- *
- */
-
-
-/*
- * save CPU registers before creating a hibernation image and before
- * restoring the memory state from it
- */
-void save_processor_state(void)
-{
- /* implentation contained in the
- * swsusp_arch_suspend function
- */
-}
-
-/*
- * restore the contents of CPU registers
- */
-void restore_processor_state(void)
-{
- /* implentation contained in the
- * swsusp_arch_resume function
- */
-}
+++ /dev/null
-/*
- * Support for suspend and resume on s390
- *
- * Copyright IBM Corp. 2009
- *
- * Author(s): Hans-Joachim Picht <hans@linux.vnet.ibm.com>
- *
- */
-
-#include <asm/system.h>
-#include <linux/interrupt.h>
-
-void do_after_copyback(void)
-{
- mb();
-}
-
return platform_add_devices(ap325rxa_devices,
ARRAY_SIZE(ap325rxa_devices));
}
-device_initcall(ap325rxa_devices_setup);
+arch_initcall(ap325rxa_devices_setup);
/* Return the board specific boot mode pin configuration */
static int ap325rxa_mode_pins(void)
return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
}
-__initcall(migor_devices_setup);
+arch_initcall(migor_devices_setup);
/* Return the board specific boot mode pin configuration */
static int migor_mode_pins(void)
},
};
-/* KEYSC */
+/* KEYSC in SoC (Needs SW33-2 set to ON) */
static struct sh_keysc_info keysc_info = {
.mode = SH_KEYSC_MODE_1,
.scan_timing = 10,
static struct resource keysc_resources[] = {
[0] = {
- .start = 0x1a204000,
- .end = 0x1a20400f,
+ .name = "KEYSC",
+ .start = 0x044b0000,
+ .end = 0x044b000f,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ0_KEY,
+ .start = 79,
.flags = IORESOURCE_IRQ,
},
};
quicklist_free_page(QUICK_PT, NULL, pte);
}
-#define __pte_free_tlb(tlb,pte) \
+#define __pte_free_tlb(tlb,pte,addr) \
do { \
pgtable_page_dtor(pte); \
tlb_remove_page((tlb), (pte)); \
} while (0)
-/*
- * allocating and freeing a pmd is trivial: the 1-entry pmd is
- * inside the pgd, so has no extra memory associated with it.
- */
-
-#define pmd_free(mm, x) do { } while (0)
-#define __pmd_free_tlb(tlb,x) do { } while (0)
-
static inline void check_pgt_cache(void)
{
quicklist_trim(QUICK_PGD, NULL, 25, 16);
}
#define tlb_remove_page(tlb,page) free_page_and_swap_cache(page)
-#define pte_free_tlb(tlb, ptep) pte_free((tlb)->mm, ptep)
-#define pmd_free_tlb(tlb, pmdp) pmd_free((tlb)->mm, pmdp)
-#define pud_free_tlb(tlb, pudp) pud_free((tlb)->mm, pudp)
+#define pte_free_tlb(tlb, ptep, addr) pte_free((tlb)->mm, ptep)
+#define pmd_free_tlb(tlb, pmdp, addr) pmd_free((tlb)->mm, pmdp)
+#define pud_free_tlb(tlb, pudp, addr) pud_free((tlb)->mm, pudp)
#define tlb_migrate_finish(mm) do { } while (0)
return platform_add_devices(sh7619_devices,
ARRAY_SIZE(sh7619_devices));
}
-__initcall(sh7619_devices_setup);
+arch_initcall(sh7619_devices_setup);
void __init plat_irq_setup(void)
{
return platform_add_devices(mxg_devices,
ARRAY_SIZE(mxg_devices));
}
-__initcall(mxg_devices_setup);
+arch_initcall(mxg_devices_setup);
void __init plat_irq_setup(void)
{
return platform_add_devices(sh7201_devices,
ARRAY_SIZE(sh7201_devices));
}
-__initcall(sh7201_devices_setup);
+arch_initcall(sh7201_devices_setup);
void __init plat_irq_setup(void)
{
return platform_add_devices(sh7203_devices,
ARRAY_SIZE(sh7203_devices));
}
-__initcall(sh7203_devices_setup);
+arch_initcall(sh7203_devices_setup);
void __init plat_irq_setup(void)
{
return platform_add_devices(sh7206_devices,
ARRAY_SIZE(sh7206_devices));
}
-__initcall(sh7206_devices_setup);
+arch_initcall(sh7206_devices_setup);
void __init plat_irq_setup(void)
{
return platform_add_devices(sh7705_devices,
ARRAY_SIZE(sh7705_devices));
}
-__initcall(sh7705_devices_setup);
+arch_initcall(sh7705_devices_setup);
static struct platform_device *sh7705_early_devices[] __initdata = {
&tmu0_device,
return platform_add_devices(sh770x_devices,
ARRAY_SIZE(sh770x_devices));
}
-__initcall(sh770x_devices_setup);
+arch_initcall(sh770x_devices_setup);
static struct platform_device *sh770x_early_devices[] __initdata = {
&tmu0_device,
return platform_add_devices(sh7710_devices,
ARRAY_SIZE(sh7710_devices));
}
-__initcall(sh7710_devices_setup);
+arch_initcall(sh7710_devices_setup);
static struct platform_device *sh7710_early_devices[] __initdata = {
&tmu0_device,
return platform_add_devices(sh7720_devices,
ARRAY_SIZE(sh7720_devices));
}
-__initcall(sh7720_devices_setup);
+arch_initcall(sh7720_devices_setup);
static struct platform_device *sh7720_early_devices[] __initdata = {
&cmt0_device,
return platform_add_devices(sh4202_devices,
ARRAY_SIZE(sh4202_devices));
}
-__initcall(sh4202_devices_setup);
+arch_initcall(sh4202_devices_setup);
static struct platform_device *sh4202_early_devices[] __initdata = {
&tmu0_device,
return platform_add_devices(sh7750_devices,
ARRAY_SIZE(sh7750_devices));
}
-__initcall(sh7750_devices_setup);
+arch_initcall(sh7750_devices_setup);
static struct platform_device *sh7750_early_devices[] __initdata = {
&tmu0_device,
return platform_add_devices(sh7760_devices,
ARRAY_SIZE(sh7760_devices));
}
-__initcall(sh7760_devices_setup);
+arch_initcall(sh7760_devices_setup);
static struct platform_device *sh7760_early_devices[] __initdata = {
&tmu0_device,
return platform_add_devices(sh7343_devices,
ARRAY_SIZE(sh7343_devices));
}
-__initcall(sh7343_devices_setup);
+arch_initcall(sh7343_devices_setup);
static struct platform_device *sh7343_early_devices[] __initdata = {
&cmt_device,
return platform_add_devices(sh7366_devices,
ARRAY_SIZE(sh7366_devices));
}
-__initcall(sh7366_devices_setup);
+arch_initcall(sh7366_devices_setup);
static struct platform_device *sh7366_early_devices[] __initdata = {
&cmt_device,
return platform_add_devices(sh7722_devices,
ARRAY_SIZE(sh7722_devices));
}
-__initcall(sh7722_devices_setup);
+arch_initcall(sh7722_devices_setup);
static struct platform_device *sh7722_early_devices[] __initdata = {
&cmt_device,
return platform_add_devices(sh7723_devices,
ARRAY_SIZE(sh7723_devices));
}
-__initcall(sh7723_devices_setup);
+arch_initcall(sh7723_devices_setup);
static struct platform_device *sh7723_early_devices[] __initdata = {
&cmt_device,
return platform_add_devices(sh7724_devices,
ARRAY_SIZE(sh7724_devices));
}
-device_initcall(sh7724_devices_setup);
+arch_initcall(sh7724_devices_setup);
static struct platform_device *sh7724_early_devices[] __initdata = {
&cmt_device,
return platform_add_devices(sh7763_devices,
ARRAY_SIZE(sh7763_devices));
}
-__initcall(sh7763_devices_setup);
+arch_initcall(sh7763_devices_setup);
static struct platform_device *sh7763_early_devices[] __initdata = {
&tmu0_device,
return platform_add_devices(sh7770_devices,
ARRAY_SIZE(sh7770_devices));
}
-__initcall(sh7770_devices_setup);
+arch_initcall(sh7770_devices_setup);
static struct platform_device *sh7770_early_devices[] __initdata = {
&tmu0_device,
return platform_add_devices(sh7780_devices,
ARRAY_SIZE(sh7780_devices));
}
-__initcall(sh7780_devices_setup);
+arch_initcall(sh7780_devices_setup);
static struct platform_device *sh7780_early_devices[] __initdata = {
&tmu0_device,
return platform_add_devices(sh7785_devices,
ARRAY_SIZE(sh7785_devices));
}
-__initcall(sh7785_devices_setup);
+arch_initcall(sh7785_devices_setup);
static struct platform_device *sh7785_early_devices[] __initdata = {
&tmu0_device,
return platform_add_devices(sh7786_devices,
ARRAY_SIZE(sh7786_devices));
}
-device_initcall(sh7786_devices_setup);
+arch_initcall(sh7786_devices_setup);
void __init plat_early_device_setup(void)
{
return platform_add_devices(shx3_devices,
ARRAY_SIZE(shx3_devices));
}
-__initcall(shx3_devices_setup);
+arch_initcall(shx3_devices_setup);
void __init plat_early_device_setup(void)
{
return platform_add_devices(sh5_devices,
ARRAY_SIZE(sh5_devices));
}
-__initcall(sh5_devices_setup);
+arch_initcall(sh5_devices_setup);
void __init plat_early_device_setup(void)
{
tst #SUSP_SH_SF, r0
bt skip_set_sf
+#ifdef CONFIG_CPU_SUBTYPE_SH7724
+ /* DBSC: put memory in self-refresh mode */
- /* SDRAM: disable power down and put in self-refresh mode */
+ mov.l dben_reg, r4
+ mov.l dben_data0, r1
+ mov.l r1, @r4
+
+ mov.l dbrfpdn0_reg, r4
+ mov.l dbrfpdn0_data0, r1
+ mov.l r1, @r4
+
+ mov.l dbcmdcnt_reg, r4
+ mov.l dbcmdcnt_data0, r1
+ mov.l r1, @r4
+
+ mov.l dbcmdcnt_reg, r4
+ mov.l dbcmdcnt_data1, r1
+ mov.l r1, @r4
+
+ mov.l dbrfpdn0_reg, r4
+ mov.l dbrfpdn0_data1, r1
+ mov.l r1, @r4
+#else
+ /* SBSC: disable power down and put in self-refresh mode */
mov.l 1f, r4
mov.l 2f, r1
mov.l @r4, r2
mov.l 3f, r3
and r3, r2
mov.l r2, @r4
+#endif
skip_set_sf:
tst #SUSP_SH_SLEEP, r0
tst #SUSP_SH_SF, r0
bt skip_restore_sf
- /* SDRAM: set auto-refresh mode */
+#ifdef CONFIG_CPU_SUBTYPE_SH7724
+ /* DBSC: put memory in auto-refresh mode */
+
+ mov.l dbrfpdn0_reg, r4
+ mov.l dbrfpdn0_data0, r1
+ mov.l r1, @r4
+
+ /* sleep 140 ns */
+ nop
+ nop
+ nop
+ nop
+
+ mov.l dbcmdcnt_reg, r4
+ mov.l dbcmdcnt_data0, r1
+ mov.l r1, @r4
+
+ mov.l dbcmdcnt_reg, r4
+ mov.l dbcmdcnt_data1, r1
+ mov.l r1, @r4
+
+ mov.l dben_reg, r4
+ mov.l dben_data1, r1
+ mov.l r1, @r4
+
+ mov.l dbrfpdn0_reg, r4
+ mov.l dbrfpdn0_data2, r1
+ mov.l r1, @r4
+#else
+ /* SBSC: set auto-refresh mode */
mov.l 1f, r4
mov.l @r4, r2
mov.l 4f, r3
add r4, r3
or r2, r3
mov.l r3, @r1
+#endif
skip_restore_sf:
rts
nop
.balign 4
+#ifdef CONFIG_CPU_SUBTYPE_SH7724
+dben_reg: .long 0xfd000010 /* DBEN */
+dben_data0: .long 0
+dben_data1: .long 1
+dbrfpdn0_reg: .long 0xfd000040 /* DBRFPDN0 */
+dbrfpdn0_data0: .long 0
+dbrfpdn0_data1: .long 1
+dbrfpdn0_data2: .long 0x00010000
+dbcmdcnt_reg: .long 0xfd000014 /* DBCMDCNT */
+dbcmdcnt_data0: .long 2
+dbcmdcnt_data1: .long 4
+#else
1: .long 0xfe400008 /* SDCR0 */
2: .long 0x00000400
3: .long 0xffff7fff
4: .long 0xfffffbff
+#endif
5: .long 0xa4150020 /* STBCR */
6: .long 0xfe40001c /* RTCOR */
7: .long 0xfe400018 /* RTCNT */
if (thread_info_flags & _TIF_NOTIFY_RESUME) {
clear_thread_flag(TIF_NOTIFY_RESUME);
tracehook_notify_resume(regs);
+ if (current->replacement_session_keyring)
+ key_replace_session_keyring();
}
}
if (thread_info_flags & _TIF_NOTIFY_RESUME) {
clear_thread_flag(TIF_NOTIFY_RESUME);
tracehook_notify_resume(regs);
+ if (current->replacement_session_keyring)
+ key_replace_session_keyring();
}
}
select ARCH_WANT_OPTIONAL_GPIOLIB
select RTC_CLASS
select RTC_DRV_M48T59
+ select HAVE_DMA_ATTRS
+ select HAVE_DMA_API_DEBUG
config SPARC32
def_bool !64BIT
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Fri Apr 17 04:04:46 2009
+# Linux kernel version: 2.6.31-rc1
+# Tue Aug 18 23:45:52 2009
#
# CONFIG_64BIT is not set
CONFIG_SPARC=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_OF=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+
+#
+# Performance Counters
+#
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_SUN_PM=y
# CONFIG_SPARC_LED is not set
CONFIG_SERIAL_CONSOLE=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_KGDB_SERIAL_CONSOLE=y
CONFIG_KGDB_TESTS=y
# CONFIG_KGDB_TESTS_ON_BOOT is not set
+# CONFIG_KMEMCHECK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_STACK_DEBUG is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Tue Jun 16 04:59:36 2009
+# Linux kernel version: 2.6.31-rc1
+# Tue Aug 18 23:56:02 2009
#
CONFIG_64BIT=y
CONFIG_SPARC=y
CONFIG_OF=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=1
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=8192
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
+# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=m
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=m
CONFIG_BNX2=m
+# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# Miscellaneous USB options
#
-CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_SUN_PARTITION=y
-CONFIG_NLS=m
+CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
#include <linux/scatterlist.h>
#include <linux/mm.h>
+#include <linux/dma-debug.h>
#define DMA_ERROR_CODE (~(dma_addr_t)0x0)
#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
#define dma_is_consistent(d, h) (1)
-struct dma_ops {
- void *(*alloc_coherent)(struct device *dev, size_t size,
- dma_addr_t *dma_handle, gfp_t flag);
- void (*free_coherent)(struct device *dev, size_t size,
- void *cpu_addr, dma_addr_t dma_handle);
- dma_addr_t (*map_page)(struct device *dev, struct page *page,
- unsigned long offset, size_t size,
- enum dma_data_direction direction);
- void (*unmap_page)(struct device *dev, dma_addr_t dma_addr,
- size_t size,
- enum dma_data_direction direction);
- int (*map_sg)(struct device *dev, struct scatterlist *sg, int nents,
- enum dma_data_direction direction);
- void (*unmap_sg)(struct device *dev, struct scatterlist *sg,
- int nhwentries,
- enum dma_data_direction direction);
- void (*sync_single_for_cpu)(struct device *dev,
- dma_addr_t dma_handle, size_t size,
- enum dma_data_direction direction);
- void (*sync_single_for_device)(struct device *dev,
- dma_addr_t dma_handle, size_t size,
- enum dma_data_direction direction);
- void (*sync_sg_for_cpu)(struct device *dev, struct scatterlist *sg,
- int nelems,
- enum dma_data_direction direction);
- void (*sync_sg_for_device)(struct device *dev,
- struct scatterlist *sg, int nents,
- enum dma_data_direction dir);
-};
-extern const struct dma_ops *dma_ops;
+extern struct dma_map_ops *dma_ops, pci32_dma_ops;
+extern struct bus_type pci_bus_type;
-static inline void *dma_alloc_coherent(struct device *dev, size_t size,
- dma_addr_t *dma_handle, gfp_t flag)
-{
- return dma_ops->alloc_coherent(dev, size, dma_handle, flag);
-}
-
-static inline void dma_free_coherent(struct device *dev, size_t size,
- void *cpu_addr, dma_addr_t dma_handle)
-{
- dma_ops->free_coherent(dev, size, cpu_addr, dma_handle);
-}
-
-static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
- size_t size,
- enum dma_data_direction direction)
-{
- return dma_ops->map_page(dev, virt_to_page(cpu_addr),
- (unsigned long)cpu_addr & ~PAGE_MASK, size,
- direction);
-}
-
-static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
- size_t size,
- enum dma_data_direction direction)
-{
- dma_ops->unmap_page(dev, dma_addr, size, direction);
-}
-
-static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
- unsigned long offset, size_t size,
- enum dma_data_direction direction)
-{
- return dma_ops->map_page(dev, page, offset, size, direction);
-}
-
-static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
- size_t size,
- enum dma_data_direction direction)
-{
- dma_ops->unmap_page(dev, dma_address, size, direction);
-}
-
-static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
- int nents, enum dma_data_direction direction)
-{
- return dma_ops->map_sg(dev, sg, nents, direction);
-}
-
-static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
- int nents, enum dma_data_direction direction)
+static inline struct dma_map_ops *get_dma_ops(struct device *dev)
{
- dma_ops->unmap_sg(dev, sg, nents, direction);
-}
-
-static inline void dma_sync_single_for_cpu(struct device *dev,
- dma_addr_t dma_handle, size_t size,
- enum dma_data_direction direction)
-{
- dma_ops->sync_single_for_cpu(dev, dma_handle, size, direction);
+#if defined(CONFIG_SPARC32) && defined(CONFIG_PCI)
+ if (dev->bus == &pci_bus_type)
+ return &pci32_dma_ops;
+#endif
+ return dma_ops;
}
-static inline void dma_sync_single_for_device(struct device *dev,
- dma_addr_t dma_handle,
- size_t size,
- enum dma_data_direction direction)
-{
- if (dma_ops->sync_single_for_device)
- dma_ops->sync_single_for_device(dev, dma_handle, size,
- direction);
-}
+#include <asm-generic/dma-mapping-common.h>
-static inline void dma_sync_sg_for_cpu(struct device *dev,
- struct scatterlist *sg, int nelems,
- enum dma_data_direction direction)
+static inline void *dma_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, gfp_t flag)
{
- dma_ops->sync_sg_for_cpu(dev, sg, nelems, direction);
-}
+ struct dma_map_ops *ops = get_dma_ops(dev);
+ void *cpu_addr;
-static inline void dma_sync_sg_for_device(struct device *dev,
- struct scatterlist *sg, int nelems,
- enum dma_data_direction direction)
-{
- if (dma_ops->sync_sg_for_device)
- dma_ops->sync_sg_for_device(dev, sg, nelems, direction);
+ cpu_addr = ops->alloc_coherent(dev, size, dma_handle, flag);
+ debug_dma_alloc_coherent(dev, size, *dma_handle, cpu_addr);
+ return cpu_addr;
}
-static inline void dma_sync_single_range_for_cpu(struct device *dev,
- dma_addr_t dma_handle,
- unsigned long offset,
- size_t size,
- enum dma_data_direction dir)
+static inline void dma_free_coherent(struct device *dev, size_t size,
+ void *cpu_addr, dma_addr_t dma_handle)
{
- dma_sync_single_for_cpu(dev, dma_handle+offset, size, dir);
-}
+ struct dma_map_ops *ops = get_dma_ops(dev);
-static inline void dma_sync_single_range_for_device(struct device *dev,
- dma_addr_t dma_handle,
- unsigned long offset,
- size_t size,
- enum dma_data_direction dir)
-{
- dma_sync_single_for_device(dev, dma_handle+offset, size, dir);
+ debug_dma_free_coherent(dev, size, cpu_addr, dma_handle);
+ ops->free_coherent(dev, size, cpu_addr, dma_handle);
}
-
static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
{
return (dma_addr == DMA_ERROR_CODE);
return retval;
}
-void __trigger_all_cpu_backtrace(void);
-#define trigger_all_cpu_backtrace() __trigger_all_cpu_backtrace()
+void arch_trigger_all_cpu_backtrace(void);
+#define arch_trigger_all_cpu_backtrace arch_trigger_all_cpu_backtrace
extern void *hardirq_stack[NR_CPUS];
extern void *softirq_stack[NR_CPUS];
#else
#include <asm/pci_32.h>
#endif
+
+#include <asm-generic/pci-dma-compat.h>
+
#endif
*/
#define PCI_DMA_BUS_IS_PHYS (0)
-#include <asm/scatterlist.h>
-
struct pci_dev;
-/* Allocate and map kernel buffer using consistent mode DMA for a device.
- * hwdev should be valid struct pci_dev pointer for PCI devices.
- */
-extern void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, dma_addr_t *dma_handle);
-
-/* Free and unmap a consistent DMA buffer.
- * cpu_addr is what was returned from pci_alloc_consistent,
- * size must be the same as what as passed into pci_alloc_consistent,
- * and likewise dma_addr must be the same as what *dma_addrp was set to.
- *
- * References to the memory and mappings assosciated with cpu_addr/dma_addr
- * past this call are illegal.
- */
-extern void pci_free_consistent(struct pci_dev *hwdev, size_t size, void *vaddr, dma_addr_t dma_handle);
-
-/* Map a single buffer of the indicated size for DMA in streaming mode.
- * The 32-bit bus address to use is returned.
- *
- * Once the device is given the dma address, the device owns this memory
- * until either pci_unmap_single or pci_dma_sync_single_for_cpu is performed.
- */
-extern dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr, size_t size, int direction);
-
-/* Unmap a single streaming mode DMA translation. The dma_addr and size
- * must match what was provided for in a previous pci_map_single call. All
- * other usages are undefined.
- *
- * After this call, reads by the cpu to the buffer are guaranteed to see
- * whatever the device wrote there.
- */
-extern void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr, size_t size, int direction);
-
/* pci_unmap_{single,page} is not a nop, thus... */
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \
dma_addr_t ADDR_NAME;
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \
(((PTR)->LEN_NAME) = (VAL))
-/*
- * Same as above, only with pages instead of mapped addresses.
- */
-extern dma_addr_t pci_map_page(struct pci_dev *hwdev, struct page *page,
- unsigned long offset, size_t size, int direction);
-extern void pci_unmap_page(struct pci_dev *hwdev,
- dma_addr_t dma_address, size_t size, int direction);
-
-/* Map a set of buffers described by scatterlist in streaming
- * mode for DMA. This is the scather-gather version of the
- * above pci_map_single interface. Here the scatter gather list
- * elements are each tagged with the appropriate dma address
- * and length. They are obtained via sg_dma_{address,length}(SG).
- *
- * NOTE: An implementation may be able to use a smaller number of
- * DMA address/length pairs than there are SG table elements.
- * (for example via virtual mapping capabilities)
- * The routine returns the number of addr/length pairs actually
- * used, at most nents.
- *
- * Device ownership issues as mentioned above for pci_map_single are
- * the same here.
- */
-extern int pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nents, int direction);
-
-/* Unmap a set of streaming mode DMA translations.
- * Again, cpu read rules concerning calls here are the same as for
- * pci_unmap_single() above.
- */
-extern void pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nhwents, int direction);
-
-/* Make physical memory consistent for a single
- * streaming mode DMA translation after a transfer.
- *
- * If you perform a pci_map_single() but wish to interrogate the
- * buffer using the cpu, yet do not wish to teardown the PCI dma
- * mapping, you must call this function before doing so. At the
- * next point you give the PCI dma address back to the card, you
- * must first perform a pci_dma_sync_for_device, and then the device
- * again owns the buffer.
- */
-extern void pci_dma_sync_single_for_cpu(struct pci_dev *hwdev, dma_addr_t dma_handle, size_t size, int direction);
-extern void pci_dma_sync_single_for_device(struct pci_dev *hwdev, dma_addr_t dma_handle, size_t size, int direction);
-
-/* Make physical memory consistent for a set of streaming
- * mode DMA translations after a transfer.
- *
- * The same as pci_dma_sync_single_* but for a scatter-gather list,
- * same rules and usage.
- */
-extern void pci_dma_sync_sg_for_cpu(struct pci_dev *hwdev, struct scatterlist *sg, int nelems, int direction);
-extern void pci_dma_sync_sg_for_device(struct pci_dev *hwdev, struct scatterlist *sg, int nelems, int direction);
-
-/* Return whether the given PCI device DMA address mask can
- * be supported properly. For example, if your device can
- * only drive the low 24-bits during PCI bus mastering, then
- * you would pass 0x00ffffff as the mask to this function.
- */
-static inline int pci_dma_supported(struct pci_dev *hwdev, u64 mask)
-{
- return 1;
-}
-
#ifdef CONFIG_PCI
static inline void pci_dma_burst_advice(struct pci_dev *pdev,
enum pci_dma_burst_strategy *strat,
}
#endif
-#define PCI_DMA_ERROR_CODE (~(dma_addr_t)0x0)
-
-static inline int pci_dma_mapping_error(struct pci_dev *pdev,
- dma_addr_t dma_addr)
-{
- return (dma_addr == PCI_DMA_ERROR_CODE);
-}
-
struct device_node;
extern struct device_node *pci_device_to_OF_node(struct pci_dev *pdev);
*/
#define PCI_DMA_BUS_IS_PHYS (0)
-static inline void *pci_alloc_consistent(struct pci_dev *pdev, size_t size,
- dma_addr_t *dma_handle)
-{
- return dma_alloc_coherent(&pdev->dev, size, dma_handle, GFP_ATOMIC);
-}
-
-static inline void pci_free_consistent(struct pci_dev *pdev, size_t size,
- void *vaddr, dma_addr_t dma_handle)
-{
- return dma_free_coherent(&pdev->dev, size, vaddr, dma_handle);
-}
-
-static inline dma_addr_t pci_map_single(struct pci_dev *pdev, void *ptr,
- size_t size, int direction)
-{
- return dma_map_single(&pdev->dev, ptr, size,
- (enum dma_data_direction) direction);
-}
-
-static inline void pci_unmap_single(struct pci_dev *pdev, dma_addr_t dma_addr,
- size_t size, int direction)
-{
- dma_unmap_single(&pdev->dev, dma_addr, size,
- (enum dma_data_direction) direction);
-}
-
-#define pci_map_page(dev, page, off, size, dir) \
- pci_map_single(dev, (page_address(page) + (off)), size, dir)
-#define pci_unmap_page(dev,addr,sz,dir) \
- pci_unmap_single(dev,addr,sz,dir)
-
/* pci_unmap_{single,page} is not a nop, thus... */
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \
dma_addr_t ADDR_NAME;
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \
(((PTR)->LEN_NAME) = (VAL))
-static inline int pci_map_sg(struct pci_dev *pdev, struct scatterlist *sg,
- int nents, int direction)
-{
- return dma_map_sg(&pdev->dev, sg, nents,
- (enum dma_data_direction) direction);
-}
-
-static inline void pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sg,
- int nents, int direction)
-{
- dma_unmap_sg(&pdev->dev, sg, nents,
- (enum dma_data_direction) direction);
-}
-
-static inline void pci_dma_sync_single_for_cpu(struct pci_dev *pdev,
- dma_addr_t dma_handle,
- size_t size, int direction)
-{
- dma_sync_single_for_cpu(&pdev->dev, dma_handle, size,
- (enum dma_data_direction) direction);
-}
-
-static inline void pci_dma_sync_single_for_device(struct pci_dev *pdev,
- dma_addr_t dma_handle,
- size_t size, int direction)
-{
- /* No flushing needed to sync cpu writes to the device. */
-}
-
-static inline void pci_dma_sync_sg_for_cpu(struct pci_dev *pdev,
- struct scatterlist *sg,
- int nents, int direction)
-{
- dma_sync_sg_for_cpu(&pdev->dev, sg, nents,
- (enum dma_data_direction) direction);
-}
-
-static inline void pci_dma_sync_sg_for_device(struct pci_dev *pdev,
- struct scatterlist *sg,
- int nelems, int direction)
-{
- /* No flushing needed to sync cpu writes to the device. */
-}
-
-/* Return whether the given PCI device DMA address mask can
- * be supported properly. For example, if your device can
- * only drive the low 24-bits during PCI bus mastering, then
- * you would pass 0x00ffffff as the mask to this function.
- */
-extern int pci_dma_supported(struct pci_dev *hwdev, u64 mask);
-
/* PCI IOMMU mapping bypass support. */
/* PCI 64-bit addressing works for all slots on all controller
#define PCI64_REQUIRED_MASK (~(dma64_addr_t)0)
#define PCI64_ADDR_BASE 0xfffc000000000000UL
-static inline int pci_dma_mapping_error(struct pci_dev *pdev,
- dma_addr_t dma_addr)
-{
- return dma_mapping_error(&pdev->dev, dma_addr);
-}
-
#ifdef CONFIG_PCI
static inline void pci_dma_burst_advice(struct pci_dev *pdev,
enum pci_dma_burst_strategy *strat,
BTFIXUPDEF_CALL(void, free_pmd_fast, pmd_t *)
#define free_pmd_fast(pmd) BTFIXUP_CALL(free_pmd_fast)(pmd)
-#define pmd_free(mm, pmd) free_pmd_fast(pmd)
-#define __pmd_free_tlb(tlb, pmd) pmd_free((tlb)->mm, pmd)
+#define pmd_free(mm, pmd) free_pmd_fast(pmd)
+#define __pmd_free_tlb(tlb, pmd, addr) pmd_free((tlb)->mm, pmd)
BTFIXUPDEF_CALL(void, pmd_populate, pmd_t *, struct page *)
#define pmd_populate(MM, PMD, PTE) BTFIXUP_CALL(pmd_populate)(PMD, PTE)
#define pte_free_kernel(mm, pte) BTFIXUP_CALL(free_pte_fast)(pte)
BTFIXUPDEF_CALL(void, pte_free, pgtable_t )
-#define pte_free(mm, pte) BTFIXUP_CALL(pte_free)(pte)
-#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, pte)
+#define pte_free(mm, pte) BTFIXUP_CALL(pte_free)(pte)
+#define __pte_free_tlb(tlb, pte, addr) pte_free((tlb)->mm, pte)
#endif /* _SPARC_PGALLOC_H */
extern pte_t pgoff_to_pte(unsigned long);
#define PTE_FILE_MAX_BITS (64UL - PAGE_SHIFT - 1UL)
-extern unsigned long *sparc64_valid_addr_bitmap;
+extern unsigned long sparc64_valid_addr_bitmap[];
/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
-#define kern_addr_valid(addr) \
- (test_bit(__pa((unsigned long)(addr))>>22, sparc64_valid_addr_bitmap))
+static inline bool kern_addr_valid(unsigned long addr)
+{
+ unsigned long paddr = __pa(addr);
+
+ if ((paddr >> 41UL) != 0UL)
+ return false;
+ return test_bit(paddr >> 22, sparc64_valid_addr_bitmap);
+}
extern int page_in_phys_avail(unsigned long paddr);
*
* Unfortunately this scheme limits us to ~16,000,000 cpus.
*/
-static inline void __read_lock(raw_rwlock_t *rw)
+static inline void arch_read_lock(raw_rwlock_t *rw)
{
register raw_rwlock_t *lp asm("g1");
lp = rw;
#define __raw_read_lock(lock) \
do { unsigned long flags; \
local_irq_save(flags); \
- __read_lock(lock); \
+ arch_read_lock(lock); \
local_irq_restore(flags); \
} while(0)
-static inline void __read_unlock(raw_rwlock_t *rw)
+static inline void arch_read_unlock(raw_rwlock_t *rw)
{
register raw_rwlock_t *lp asm("g1");
lp = rw;
#define __raw_read_unlock(lock) \
do { unsigned long flags; \
local_irq_save(flags); \
- __read_unlock(lock); \
+ arch_read_unlock(lock); \
local_irq_restore(flags); \
} while(0)
return (val == 0);
}
-static inline int __read_trylock(raw_rwlock_t *rw)
+static inline int arch_read_trylock(raw_rwlock_t *rw)
{
register raw_rwlock_t *lp asm("g1");
register int res asm("o0");
({ unsigned long flags; \
int res; \
local_irq_save(flags); \
- res = __read_trylock(lock); \
+ res = arch_read_trylock(lock); \
local_irq_restore(flags); \
res; \
})
/* Multi-reader locks, these are much saner than the 32-bit Sparc ones... */
-static void inline __read_lock(raw_rwlock_t *lock)
+static void inline arch_read_lock(raw_rwlock_t *lock)
{
unsigned long tmp1, tmp2;
: "memory");
}
-static int inline __read_trylock(raw_rwlock_t *lock)
+static int inline arch_read_trylock(raw_rwlock_t *lock)
{
int tmp1, tmp2;
return tmp1;
}
-static void inline __read_unlock(raw_rwlock_t *lock)
+static void inline arch_read_unlock(raw_rwlock_t *lock)
{
unsigned long tmp1, tmp2;
: "memory");
}
-static void inline __write_lock(raw_rwlock_t *lock)
+static void inline arch_write_lock(raw_rwlock_t *lock)
{
unsigned long mask, tmp1, tmp2;
: "memory");
}
-static void inline __write_unlock(raw_rwlock_t *lock)
+static void inline arch_write_unlock(raw_rwlock_t *lock)
{
__asm__ __volatile__(
" stw %%g0, [%0]"
: "memory");
}
-static int inline __write_trylock(raw_rwlock_t *lock)
+static int inline arch_write_trylock(raw_rwlock_t *lock)
{
unsigned long mask, tmp1, tmp2, result;
return result;
}
-#define __raw_read_lock(p) __read_lock(p)
-#define __raw_read_lock_flags(p, f) __read_lock(p)
-#define __raw_read_trylock(p) __read_trylock(p)
-#define __raw_read_unlock(p) __read_unlock(p)
-#define __raw_write_lock(p) __write_lock(p)
-#define __raw_write_lock_flags(p, f) __write_lock(p)
-#define __raw_write_unlock(p) __write_unlock(p)
-#define __raw_write_trylock(p) __write_trylock(p)
+#define __raw_read_lock(p) arch_read_lock(p)
+#define __raw_read_lock_flags(p, f) arch_read_lock(p)
+#define __raw_read_trylock(p) arch_read_trylock(p)
+#define __raw_read_unlock(p) arch_read_unlock(p)
+#define __raw_write_lock(p) arch_write_lock(p)
+#define __raw_write_lock_flags(p, f) arch_write_lock(p)
+#define __raw_write_unlock(p) arch_write_unlock(p)
+#define __raw_write_trylock(p) arch_write_trylock(p)
#define __raw_read_can_lock(rw) (!((rw)->lock & 0x80000000UL))
#define __raw_write_can_lock(rw) (!(rw)->lock)
}
#define tlb_remove_tlb_entry(mp,ptep,addr) do { } while (0)
-#define pte_free_tlb(mp, ptepage) pte_free((mp)->mm, ptepage)
-#define pmd_free_tlb(mp, pmdp) pmd_free((mp)->mm, pmdp)
-#define pud_free_tlb(tlb,pudp) __pud_free_tlb(tlb,pudp)
+#define pte_free_tlb(mp, ptepage, addr) pte_free((mp)->mm, ptepage)
+#define pmd_free_tlb(mp, pmdp, addr) pmd_free((mp)->mm, pmdp)
+#define pud_free_tlb(tlb,pudp, addr) __pud_free_tlb(tlb,pudp,addr)
#define tlb_migrate_finish(mm) do { } while (0)
#define tlb_start_vma(tlb, vma) do { } while (0)
obj-$(CONFIG_SPARC32) += devres.o
devres-y := ../../../kernel/irq/devres.o
-obj-$(CONFIG_SPARC32) += dma.o
+obj-y += dma.o
obj-$(CONFIG_SPARC32_PCI) += pcic.o
-/* dma.c: PCI and SBUS DMA accessors for 32-bit sparc.
- *
- * Copyright (C) 2008 David S. Miller <davem@davemloft.net>
- */
-
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/dma-mapping.h>
-#include <linux/scatterlist.h>
-#include <linux/mm.h>
-
-#ifdef CONFIG_PCI
-#include <linux/pci.h>
-#endif
+#include <linux/dma-debug.h>
-#include "dma.h"
+#define PREALLOC_DMA_DEBUG_ENTRIES (1 << 15)
-int dma_supported(struct device *dev, u64 mask)
+static int __init dma_init(void)
{
-#ifdef CONFIG_PCI
- if (dev->bus == &pci_bus_type)
- return pci_dma_supported(to_pci_dev(dev), mask);
-#endif
+ dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
return 0;
}
-EXPORT_SYMBOL(dma_supported);
-
-int dma_set_mask(struct device *dev, u64 dma_mask)
-{
-#ifdef CONFIG_PCI
- if (dev->bus == &pci_bus_type)
- return pci_set_dma_mask(to_pci_dev(dev), dma_mask);
-#endif
- return -EOPNOTSUPP;
-}
-EXPORT_SYMBOL(dma_set_mask);
-
-static void *dma32_alloc_coherent(struct device *dev, size_t size,
- dma_addr_t *dma_handle, gfp_t flag)
-{
-#ifdef CONFIG_PCI
- if (dev->bus == &pci_bus_type)
- return pci_alloc_consistent(to_pci_dev(dev), size, dma_handle);
-#endif
- return sbus_alloc_consistent(dev, size, dma_handle);
-}
-
-static void dma32_free_coherent(struct device *dev, size_t size,
- void *cpu_addr, dma_addr_t dma_handle)
-{
-#ifdef CONFIG_PCI
- if (dev->bus == &pci_bus_type) {
- pci_free_consistent(to_pci_dev(dev), size,
- cpu_addr, dma_handle);
- return;
- }
-#endif
- sbus_free_consistent(dev, size, cpu_addr, dma_handle);
-}
-
-static dma_addr_t dma32_map_page(struct device *dev, struct page *page,
- unsigned long offset, size_t size,
- enum dma_data_direction direction)
-{
-#ifdef CONFIG_PCI
- if (dev->bus == &pci_bus_type)
- return pci_map_page(to_pci_dev(dev), page, offset,
- size, (int)direction);
-#endif
- return sbus_map_single(dev, page_address(page) + offset,
- size, (int)direction);
-}
-
-static void dma32_unmap_page(struct device *dev, dma_addr_t dma_address,
- size_t size, enum dma_data_direction direction)
-{
-#ifdef CONFIG_PCI
- if (dev->bus == &pci_bus_type) {
- pci_unmap_page(to_pci_dev(dev), dma_address,
- size, (int)direction);
- return;
- }
-#endif
- sbus_unmap_single(dev, dma_address, size, (int)direction);
-}
-
-static int dma32_map_sg(struct device *dev, struct scatterlist *sg,
- int nents, enum dma_data_direction direction)
-{
-#ifdef CONFIG_PCI
- if (dev->bus == &pci_bus_type)
- return pci_map_sg(to_pci_dev(dev), sg, nents, (int)direction);
-#endif
- return sbus_map_sg(dev, sg, nents, direction);
-}
-
-void dma32_unmap_sg(struct device *dev, struct scatterlist *sg,
- int nents, enum dma_data_direction direction)
-{
-#ifdef CONFIG_PCI
- if (dev->bus == &pci_bus_type) {
- pci_unmap_sg(to_pci_dev(dev), sg, nents, (int)direction);
- return;
- }
-#endif
- sbus_unmap_sg(dev, sg, nents, (int)direction);
-}
-
-static void dma32_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
- size_t size,
- enum dma_data_direction direction)
-{
-#ifdef CONFIG_PCI
- if (dev->bus == &pci_bus_type) {
- pci_dma_sync_single_for_cpu(to_pci_dev(dev), dma_handle,
- size, (int)direction);
- return;
- }
-#endif
- sbus_dma_sync_single_for_cpu(dev, dma_handle, size, (int) direction);
-}
-
-static void dma32_sync_single_for_device(struct device *dev,
- dma_addr_t dma_handle, size_t size,
- enum dma_data_direction direction)
-{
-#ifdef CONFIG_PCI
- if (dev->bus == &pci_bus_type) {
- pci_dma_sync_single_for_device(to_pci_dev(dev), dma_handle,
- size, (int)direction);
- return;
- }
-#endif
- sbus_dma_sync_single_for_device(dev, dma_handle, size, (int) direction);
-}
-
-static void dma32_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
- int nelems, enum dma_data_direction direction)
-{
-#ifdef CONFIG_PCI
- if (dev->bus == &pci_bus_type) {
- pci_dma_sync_sg_for_cpu(to_pci_dev(dev), sg,
- nelems, (int)direction);
- return;
- }
-#endif
- BUG();
-}
-
-static void dma32_sync_sg_for_device(struct device *dev,
- struct scatterlist *sg, int nelems,
- enum dma_data_direction direction)
-{
-#ifdef CONFIG_PCI
- if (dev->bus == &pci_bus_type) {
- pci_dma_sync_sg_for_device(to_pci_dev(dev), sg,
- nelems, (int)direction);
- return;
- }
-#endif
- BUG();
-}
-
-static const struct dma_ops dma32_dma_ops = {
- .alloc_coherent = dma32_alloc_coherent,
- .free_coherent = dma32_free_coherent,
- .map_page = dma32_map_page,
- .unmap_page = dma32_unmap_page,
- .map_sg = dma32_map_sg,
- .unmap_sg = dma32_unmap_sg,
- .sync_single_for_cpu = dma32_sync_single_for_cpu,
- .sync_single_for_device = dma32_sync_single_for_device,
- .sync_sg_for_cpu = dma32_sync_sg_for_cpu,
- .sync_sg_for_device = dma32_sync_sg_for_device,
-};
-
-const struct dma_ops *dma_ops = &dma32_dma_ops;
-EXPORT_SYMBOL(dma_ops);
+fs_initcall(dma_init);
+++ /dev/null
-void *sbus_alloc_consistent(struct device *dev, long len, u32 *dma_addrp);
-void sbus_free_consistent(struct device *dev, long n, void *p, u32 ba);
-dma_addr_t sbus_map_single(struct device *dev, void *va,
- size_t len, int direction);
-void sbus_unmap_single(struct device *dev, dma_addr_t ba,
- size_t n, int direction);
-int sbus_map_sg(struct device *dev, struct scatterlist *sg,
- int n, int direction);
-void sbus_unmap_sg(struct device *dev, struct scatterlist *sg,
- int n, int direction);
-void sbus_dma_sync_single_for_cpu(struct device *dev, dma_addr_t ba,
- size_t size, int direction);
-void sbus_dma_sync_single_for_device(struct device *dev, dma_addr_t ba,
- size_t size, int direction);
static dma_addr_t dma_4u_map_page(struct device *dev, struct page *page,
unsigned long offset, size_t sz,
- enum dma_data_direction direction)
+ enum dma_data_direction direction,
+ struct dma_attrs *attrs)
{
struct iommu *iommu;
struct strbuf *strbuf;
}
static void dma_4u_unmap_page(struct device *dev, dma_addr_t bus_addr,
- size_t sz, enum dma_data_direction direction)
+ size_t sz, enum dma_data_direction direction,
+ struct dma_attrs *attrs)
{
struct iommu *iommu;
struct strbuf *strbuf;
}
static int dma_4u_map_sg(struct device *dev, struct scatterlist *sglist,
- int nelems, enum dma_data_direction direction)
+ int nelems, enum dma_data_direction direction,
+ struct dma_attrs *attrs)
{
struct scatterlist *s, *outs, *segstart;
unsigned long flags, handle, prot, ctx;
}
static void dma_4u_unmap_sg(struct device *dev, struct scatterlist *sglist,
- int nelems, enum dma_data_direction direction)
+ int nelems, enum dma_data_direction direction,
+ struct dma_attrs *attrs)
{
unsigned long flags, ctx;
struct scatterlist *sg;
spin_unlock_irqrestore(&iommu->lock, flags);
}
-static const struct dma_ops sun4u_dma_ops = {
+static struct dma_map_ops sun4u_dma_ops = {
.alloc_coherent = dma_4u_alloc_coherent,
.free_coherent = dma_4u_free_coherent,
.map_page = dma_4u_map_page,
.sync_sg_for_cpu = dma_4u_sync_sg_for_cpu,
};
-const struct dma_ops *dma_ops = &sun4u_dma_ops;
+struct dma_map_ops *dma_ops = &sun4u_dma_ops;
EXPORT_SYMBOL(dma_ops);
+extern int pci64_dma_supported(struct pci_dev *pdev, u64 device_mask);
+
int dma_supported(struct device *dev, u64 device_mask)
{
struct iommu *iommu = dev->archdata.iommu;
#ifdef CONFIG_PCI
if (dev->bus == &pci_bus_type)
- return pci_dma_supported(to_pci_dev(dev), device_mask);
+ return pci64_dma_supported(to_pci_dev(dev), device_mask);
#endif
return 0;
#include <asm/iommu.h>
#include <asm/io-unit.h>
-#include "dma.h"
-
#define mmu_inval_dma_area(p, l) /* Anton pulled it out for 2.4.0-xx */
static struct resource *_sparc_find_resource(struct resource *r,
* Typically devices use them for control blocks.
* CPU may access them without any explicit flushing.
*/
-void *sbus_alloc_consistent(struct device *dev, long len, u32 *dma_addrp)
+static void *sbus_alloc_coherent(struct device *dev, size_t len,
+ dma_addr_t *dma_addrp, gfp_t gfp)
{
struct of_device *op = to_of_device(dev);
unsigned long len_total = (len + PAGE_SIZE-1) & PAGE_MASK;
return NULL;
}
-void sbus_free_consistent(struct device *dev, long n, void *p, u32 ba)
+static void sbus_free_coherent(struct device *dev, size_t n, void *p,
+ dma_addr_t ba)
{
struct resource *res;
struct page *pgv;
n = (n + PAGE_SIZE-1) & PAGE_MASK;
if ((res->end-res->start)+1 != n) {
- printk("sbus_free_consistent: region 0x%lx asked 0x%lx\n",
+ printk("sbus_free_consistent: region 0x%lx asked 0x%zx\n",
(long)((res->end-res->start)+1), n);
return;
}
* CPU view of this memory may be inconsistent with
* a device view and explicit flushing is necessary.
*/
-dma_addr_t sbus_map_single(struct device *dev, void *va, size_t len, int direction)
+static dma_addr_t sbus_map_page(struct device *dev, struct page *page,
+ unsigned long offset, size_t len,
+ enum dma_data_direction dir,
+ struct dma_attrs *attrs)
{
+ void *va = page_address(page) + offset;
+
/* XXX why are some lengths signed, others unsigned? */
if (len <= 0) {
return 0;
return mmu_get_scsi_one(dev, va, len);
}
-void sbus_unmap_single(struct device *dev, dma_addr_t ba, size_t n, int direction)
+static void sbus_unmap_page(struct device *dev, dma_addr_t ba, size_t n,
+ enum dma_data_direction dir, struct dma_attrs *attrs)
{
mmu_release_scsi_one(dev, ba, n);
}
-int sbus_map_sg(struct device *dev, struct scatterlist *sg, int n, int direction)
+static int sbus_map_sg(struct device *dev, struct scatterlist *sg, int n,
+ enum dma_data_direction dir, struct dma_attrs *attrs)
{
mmu_get_scsi_sgl(dev, sg, n);
return n;
}
-void sbus_unmap_sg(struct device *dev, struct scatterlist *sg, int n, int direction)
+static void sbus_unmap_sg(struct device *dev, struct scatterlist *sg, int n,
+ enum dma_data_direction dir, struct dma_attrs *attrs)
{
mmu_release_scsi_sgl(dev, sg, n);
}
-void sbus_dma_sync_single_for_cpu(struct device *dev, dma_addr_t ba, size_t size, int direction)
+static void sbus_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+ int n, enum dma_data_direction dir)
{
+ BUG();
}
-void sbus_dma_sync_single_for_device(struct device *dev, dma_addr_t ba, size_t size, int direction)
+static void sbus_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
+ int n, enum dma_data_direction dir)
{
+ BUG();
}
+struct dma_map_ops sbus_dma_ops = {
+ .alloc_coherent = sbus_alloc_coherent,
+ .free_coherent = sbus_free_coherent,
+ .map_page = sbus_map_page,
+ .unmap_page = sbus_unmap_page,
+ .map_sg = sbus_map_sg,
+ .unmap_sg = sbus_unmap_sg,
+ .sync_sg_for_cpu = sbus_sync_sg_for_cpu,
+ .sync_sg_for_device = sbus_sync_sg_for_device,
+};
+
+struct dma_map_ops *dma_ops = &sbus_dma_ops;
+EXPORT_SYMBOL(dma_ops);
+
static int __init sparc_register_ioport(void)
{
register_proc_sparc_ioport();
/* Allocate and map kernel buffer using consistent mode DMA for a device.
* hwdev should be valid struct pci_dev pointer for PCI devices.
*/
-void *pci_alloc_consistent(struct pci_dev *pdev, size_t len, dma_addr_t *pba)
+static void *pci32_alloc_coherent(struct device *dev, size_t len,
+ dma_addr_t *pba, gfp_t gfp)
{
unsigned long len_total = (len + PAGE_SIZE-1) & PAGE_MASK;
unsigned long va;
*pba = virt_to_phys(va); /* equals virt_to_bus (R.I.P.) for us. */
return (void *) res->start;
}
-EXPORT_SYMBOL(pci_alloc_consistent);
/* Free and unmap a consistent DMA buffer.
* cpu_addr is what was returned from pci_alloc_consistent,
* References to the memory and mappings associated with cpu_addr/dma_addr
* past this call are illegal.
*/
-void pci_free_consistent(struct pci_dev *pdev, size_t n, void *p, dma_addr_t ba)
+static void pci32_free_coherent(struct device *dev, size_t n, void *p,
+ dma_addr_t ba)
{
struct resource *res;
unsigned long pgp;
free_pages(pgp, get_order(n));
}
-EXPORT_SYMBOL(pci_free_consistent);
-
-/* Map a single buffer of the indicated size for DMA in streaming mode.
- * The 32-bit bus address to use is returned.
- *
- * Once the device is given the dma address, the device owns this memory
- * until either pci_unmap_single or pci_dma_sync_single_* is performed.
- */
-dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr, size_t size,
- int direction)
-{
- BUG_ON(direction == PCI_DMA_NONE);
- /* IIep is write-through, not flushing. */
- return virt_to_phys(ptr);
-}
-EXPORT_SYMBOL(pci_map_single);
-
-/* Unmap a single streaming mode DMA translation. The dma_addr and size
- * must match what was provided for in a previous pci_map_single call. All
- * other usages are undefined.
- *
- * After this call, reads by the cpu to the buffer are guaranteed to see
- * whatever the device wrote there.
- */
-void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t ba, size_t size,
- int direction)
-{
- BUG_ON(direction == PCI_DMA_NONE);
- if (direction != PCI_DMA_TODEVICE) {
- mmu_inval_dma_area((unsigned long)phys_to_virt(ba),
- (size + PAGE_SIZE-1) & PAGE_MASK);
- }
-}
-EXPORT_SYMBOL(pci_unmap_single);
/*
* Same as pci_map_single, but with pages.
*/
-dma_addr_t pci_map_page(struct pci_dev *hwdev, struct page *page,
- unsigned long offset, size_t size, int direction)
+static dma_addr_t pci32_map_page(struct device *dev, struct page *page,
+ unsigned long offset, size_t size,
+ enum dma_data_direction dir,
+ struct dma_attrs *attrs)
{
- BUG_ON(direction == PCI_DMA_NONE);
/* IIep is write-through, not flushing. */
return page_to_phys(page) + offset;
}
-EXPORT_SYMBOL(pci_map_page);
-
-void pci_unmap_page(struct pci_dev *hwdev,
- dma_addr_t dma_address, size_t size, int direction)
-{
- BUG_ON(direction == PCI_DMA_NONE);
- /* mmu_inval_dma_area XXX */
-}
-EXPORT_SYMBOL(pci_unmap_page);
/* Map a set of buffers described by scatterlist in streaming
* mode for DMA. This is the scather-gather version of the
* Device ownership issues as mentioned above for pci_map_single are
* the same here.
*/
-int pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sgl, int nents,
- int direction)
+static int pci32_map_sg(struct device *device, struct scatterlist *sgl,
+ int nents, enum dma_data_direction dir,
+ struct dma_attrs *attrs)
{
struct scatterlist *sg;
int n;
- BUG_ON(direction == PCI_DMA_NONE);
/* IIep is write-through, not flushing. */
for_each_sg(sgl, sg, nents, n) {
BUG_ON(page_address(sg_page(sg)) == NULL);
}
return nents;
}
-EXPORT_SYMBOL(pci_map_sg);
/* Unmap a set of streaming mode DMA translations.
* Again, cpu read rules concerning calls here are the same as for
* pci_unmap_single() above.
*/
-void pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sgl, int nents,
- int direction)
+static void pci32_unmap_sg(struct device *dev, struct scatterlist *sgl,
+ int nents, enum dma_data_direction dir,
+ struct dma_attrs *attrs)
{
struct scatterlist *sg;
int n;
- BUG_ON(direction == PCI_DMA_NONE);
- if (direction != PCI_DMA_TODEVICE) {
+ if (dir != PCI_DMA_TODEVICE) {
for_each_sg(sgl, sg, nents, n) {
BUG_ON(page_address(sg_page(sg)) == NULL);
mmu_inval_dma_area(
}
}
}
-EXPORT_SYMBOL(pci_unmap_sg);
/* Make physical memory consistent for a single
* streaming mode DMA translation before or after a transfer.
* must first perform a pci_dma_sync_for_device, and then the
* device again owns the buffer.
*/
-void pci_dma_sync_single_for_cpu(struct pci_dev *hwdev, dma_addr_t ba, size_t size, int direction)
+static void pci32_sync_single_for_cpu(struct device *dev, dma_addr_t ba,
+ size_t size, enum dma_data_direction dir)
{
- BUG_ON(direction == PCI_DMA_NONE);
- if (direction != PCI_DMA_TODEVICE) {
+ if (dir != PCI_DMA_TODEVICE) {
mmu_inval_dma_area((unsigned long)phys_to_virt(ba),
(size + PAGE_SIZE-1) & PAGE_MASK);
}
}
-EXPORT_SYMBOL(pci_dma_sync_single_for_cpu);
-void pci_dma_sync_single_for_device(struct pci_dev *hwdev, dma_addr_t ba, size_t size, int direction)
+static void pci32_sync_single_for_device(struct device *dev, dma_addr_t ba,
+ size_t size, enum dma_data_direction dir)
{
- BUG_ON(direction == PCI_DMA_NONE);
- if (direction != PCI_DMA_TODEVICE) {
+ if (dir != PCI_DMA_TODEVICE) {
mmu_inval_dma_area((unsigned long)phys_to_virt(ba),
(size + PAGE_SIZE-1) & PAGE_MASK);
}
}
-EXPORT_SYMBOL(pci_dma_sync_single_for_device);
/* Make physical memory consistent for a set of streaming
* mode DMA translations after a transfer.
* The same as pci_dma_sync_single_* but for a scatter-gather list,
* same rules and usage.
*/
-void pci_dma_sync_sg_for_cpu(struct pci_dev *hwdev, struct scatterlist *sgl, int nents, int direction)
+static void pci32_sync_sg_for_cpu(struct device *dev, struct scatterlist *sgl,
+ int nents, enum dma_data_direction dir)
{
struct scatterlist *sg;
int n;
- BUG_ON(direction == PCI_DMA_NONE);
- if (direction != PCI_DMA_TODEVICE) {
+ if (dir != PCI_DMA_TODEVICE) {
for_each_sg(sgl, sg, nents, n) {
BUG_ON(page_address(sg_page(sg)) == NULL);
mmu_inval_dma_area(
}
}
}
-EXPORT_SYMBOL(pci_dma_sync_sg_for_cpu);
-void pci_dma_sync_sg_for_device(struct pci_dev *hwdev, struct scatterlist *sgl, int nents, int direction)
+static void pci32_sync_sg_for_device(struct device *device, struct scatterlist *sgl,
+ int nents, enum dma_data_direction dir)
{
struct scatterlist *sg;
int n;
- BUG_ON(direction == PCI_DMA_NONE);
- if (direction != PCI_DMA_TODEVICE) {
+ if (dir != PCI_DMA_TODEVICE) {
for_each_sg(sgl, sg, nents, n) {
BUG_ON(page_address(sg_page(sg)) == NULL);
mmu_inval_dma_area(
}
}
}
-EXPORT_SYMBOL(pci_dma_sync_sg_for_device);
+
+struct dma_map_ops pci32_dma_ops = {
+ .alloc_coherent = pci32_alloc_coherent,
+ .free_coherent = pci32_free_coherent,
+ .map_page = pci32_map_page,
+ .map_sg = pci32_map_sg,
+ .unmap_sg = pci32_unmap_sg,
+ .sync_single_for_cpu = pci32_sync_single_for_cpu,
+ .sync_single_for_device = pci32_sync_single_for_device,
+ .sync_sg_for_cpu = pci32_sync_sg_for_cpu,
+ .sync_sg_for_device = pci32_sync_sg_for_device,
+};
+EXPORT_SYMBOL(pci32_dma_ops);
+
#endif /* CONFIG_PCI */
+/*
+ * Return whether the given PCI device DMA address mask can be
+ * supported properly. For example, if your device can only drive the
+ * low 24-bits during PCI bus mastering, then you would pass
+ * 0x00ffffff as the mask to this function.
+ */
+int dma_supported(struct device *dev, u64 mask)
+{
+#ifdef CONFIG_PCI
+ if (dev->bus == &pci_bus_type)
+ return 1;
+#endif
+ return 0;
+}
+EXPORT_SYMBOL(dma_supported);
+
+int dma_set_mask(struct device *dev, u64 dma_mask)
+{
+#ifdef CONFIG_PCI
+ if (dev->bus == &pci_bus_type)
+ return pci_set_dma_mask(to_pci_dev(dev), dma_mask);
+#endif
+ return -EOPNOTSUPP;
+}
+EXPORT_SYMBOL(dma_set_mask);
+
+
#ifdef CONFIG_PROC_FS
static int
* Therefore you cannot make any OBP calls, not even prom_printf,
* from these two routines.
*/
-static void __cpuinit register_one_mondo(unsigned long paddr, unsigned long type, unsigned long qmask)
+static void __cpuinit notrace register_one_mondo(unsigned long paddr, unsigned long type, unsigned long qmask)
{
unsigned long num_entries = (qmask + 1) / 64;
unsigned long status;
* Must preserve %g1 and %g6 (TAG).
*/
kvmap_dtlb_tsb4m_miss:
- sethi %hi(kpte_linear_bitmap), %g2
- or %g2, %lo(kpte_linear_bitmap), %g2
+ /* Clear the PAGE_OFFSET top virtual bits, shift
+ * down to get PFN, and make sure PFN is in range.
+ */
+ sllx %g4, 21, %g5
- /* Clear the PAGE_OFFSET top virtual bits, then shift
- * down to get a 256MB physical address index.
+ /* Check to see if we know about valid memory at the 4MB
+ * chunk this physical address will reside within.
*/
+ srlx %g5, 21 + 41, %g2
+ brnz,pn %g2, kvmap_dtlb_longpath
+ nop
+
+ /* This unconditional branch and delay-slot nop gets patched
+ * by the sethi sequence once the bitmap is properly setup.
+ */
+ .globl valid_addr_bitmap_insn
+valid_addr_bitmap_insn:
+ ba,pt %xcc, 2f
+ nop
+ .subsection 2
+ .globl valid_addr_bitmap_patch
+valid_addr_bitmap_patch:
+ sethi %hi(sparc64_valid_addr_bitmap), %g7
+ or %g7, %lo(sparc64_valid_addr_bitmap), %g7
+ .previous
+
+ srlx %g5, 21 + 22, %g2
+ srlx %g2, 6, %g5
+ and %g2, 63, %g2
+ sllx %g5, 3, %g5
+ ldx [%g7 + %g5], %g5
+ mov 1, %g7
+ sllx %g7, %g2, %g7
+ andcc %g5, %g7, %g0
+ be,pn %xcc, kvmap_dtlb_longpath
+
+2: sethi %hi(kpte_linear_bitmap), %g2
+ or %g2, %lo(kpte_linear_bitmap), %g2
+
+ /* Get the 256MB physical address index. */
sllx %g4, 21, %g5
mov 1, %g7
srlx %g5, 21 + 28, %g5
}
if (!touched && __get_cpu_var(last_irq_sum) == sum) {
local_inc(&__get_cpu_var(alert_counter));
- if (local_read(&__get_cpu_var(alert_counter)) == 5 * nmi_hz)
+ if (local_read(&__get_cpu_var(alert_counter)) == 30 * nmi_hz)
die_nmi("BUG: NMI Watchdog detected LOCKUP",
regs, panic_on_timeout);
} else {
pci_dev_put(ali_isa_bridge);
}
-int pci_dma_supported(struct pci_dev *pdev, u64 device_mask)
+int pci64_dma_supported(struct pci_dev *pdev, u64 device_mask)
{
u64 dma_addr_mask;
static dma_addr_t dma_4v_map_page(struct device *dev, struct page *page,
unsigned long offset, size_t sz,
- enum dma_data_direction direction)
+ enum dma_data_direction direction,
+ struct dma_attrs *attrs)
{
struct iommu *iommu;
unsigned long flags, npages, oaddr;
}
static void dma_4v_unmap_page(struct device *dev, dma_addr_t bus_addr,
- size_t sz, enum dma_data_direction direction)
+ size_t sz, enum dma_data_direction direction,
+ struct dma_attrs *attrs)
{
struct pci_pbm_info *pbm;
struct iommu *iommu;
}
static int dma_4v_map_sg(struct device *dev, struct scatterlist *sglist,
- int nelems, enum dma_data_direction direction)
+ int nelems, enum dma_data_direction direction,
+ struct dma_attrs *attrs)
{
struct scatterlist *s, *outs, *segstart;
unsigned long flags, handle, prot;
}
static void dma_4v_unmap_sg(struct device *dev, struct scatterlist *sglist,
- int nelems, enum dma_data_direction direction)
+ int nelems, enum dma_data_direction direction,
+ struct dma_attrs *attrs)
{
struct pci_pbm_info *pbm;
struct scatterlist *sg;
spin_unlock_irqrestore(&iommu->lock, flags);
}
-static void dma_4v_sync_single_for_cpu(struct device *dev,
- dma_addr_t bus_addr, size_t sz,
- enum dma_data_direction direction)
-{
- /* Nothing to do... */
-}
-
-static void dma_4v_sync_sg_for_cpu(struct device *dev,
- struct scatterlist *sglist, int nelems,
- enum dma_data_direction direction)
-{
- /* Nothing to do... */
-}
-
-static const struct dma_ops sun4v_dma_ops = {
+static struct dma_map_ops sun4v_dma_ops = {
.alloc_coherent = dma_4v_alloc_coherent,
.free_coherent = dma_4v_free_coherent,
.map_page = dma_4v_map_page,
.unmap_page = dma_4v_unmap_page,
.map_sg = dma_4v_map_sg,
.unmap_sg = dma_4v_unmap_sg,
- .sync_single_for_cpu = dma_4v_sync_single_for_cpu,
- .sync_sg_for_cpu = dma_4v_sync_sg_for_cpu,
};
static void __devinit pci_sun4v_scan_bus(struct pci_pbm_info *pbm,
}
}
-void __trigger_all_cpu_backtrace(void)
+void arch_trigger_all_cpu_backtrace(void)
{
struct thread_info *tp = current_thread_info();
struct pt_regs *regs = get_irq_regs();
static void sysrq_handle_globreg(int key, struct tty_struct *tty)
{
- __trigger_all_cpu_backtrace();
+ arch_trigger_all_cpu_backtrace();
}
static struct sysrq_key_op sparc_globalreg_op = {
if (thread_info_flags & _TIF_NOTIFY_RESUME) {
clear_thread_flag(TIF_NOTIFY_RESUME);
tracehook_notify_resume(regs);
+ if (current->replacement_session_keyring)
+ key_replace_session_keyring();
}
}
if (thread_info_flags & _TIF_NOTIFY_RESUME) {
clear_thread_flag(TIF_NOTIFY_RESUME);
tracehook_notify_resume(regs);
+ if (current->replacement_session_keyring)
+ key_replace_session_keyring();
}
}
+
dyn_size = pcpur_size - static_size - PERCPU_MODULE_RESERVE;
- ptrs_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpur_ptrs[0]));
+ ptrs_size = PFN_ALIGN(nr_cpu_ids * sizeof(pcpur_ptrs[0]));
pcpur_ptrs = alloc_bootmem(ptrs_size);
for_each_possible_cpu(cpu) {
/* allocate address and map */
vm.flags = VM_ALLOC;
- vm.size = num_possible_cpus() * PCPU_CHUNK_SIZE;
+ vm.size = nr_cpu_ids * PCPU_CHUNK_SIZE;
vm_area_register_early(&vm, PCPU_CHUNK_SIZE);
for_each_possible_cpu(cpu) {
*/
extern struct linux_prom_registers smp_penguin_ctable;
-extern unsigned long trapbase_cpu1[];
-extern unsigned long trapbase_cpu2[];
-extern unsigned long trapbase_cpu3[];
void __init smp4d_boot_cpus(void)
{
*prev = first;
local_flush_cache_all();
- /* Free unneeded trap tables */
- ClearPageReserved(virt_to_page(trapbase_cpu1));
- init_page_count(virt_to_page(trapbase_cpu1));
- free_page((unsigned long)trapbase_cpu1);
- totalram_pages++;
- num_physpages++;
-
- ClearPageReserved(virt_to_page(trapbase_cpu2));
- init_page_count(virt_to_page(trapbase_cpu2));
- free_page((unsigned long)trapbase_cpu2);
- totalram_pages++;
- num_physpages++;
-
- ClearPageReserved(virt_to_page(trapbase_cpu3));
- init_page_count(virt_to_page(trapbase_cpu3));
- free_page((unsigned long)trapbase_cpu3);
- totalram_pages++;
- num_physpages++;
-
/* Ok, they are spinning and ready to go. */
smp_processors_ready = 1;
sun4d_distribute_irqs();
*/
extern struct linux_prom_registers smp_penguin_ctable;
-extern unsigned long trapbase_cpu1[];
-extern unsigned long trapbase_cpu2[];
-extern unsigned long trapbase_cpu3[];
void __init smp4m_boot_cpus(void)
{
*prev = first;
local_flush_cache_all();
- /* Free unneeded trap tables */
- if (!cpu_isset(1, cpu_present_map)) {
- ClearPageReserved(virt_to_page(trapbase_cpu1));
- init_page_count(virt_to_page(trapbase_cpu1));
- free_page((unsigned long)trapbase_cpu1);
- totalram_pages++;
- num_physpages++;
- }
- if (!cpu_isset(2, cpu_present_map)) {
- ClearPageReserved(virt_to_page(trapbase_cpu2));
- init_page_count(virt_to_page(trapbase_cpu2));
- free_page((unsigned long)trapbase_cpu2);
- totalram_pages++;
- num_physpages++;
- }
- if (!cpu_isset(3, cpu_present_map)) {
- ClearPageReserved(virt_to_page(trapbase_cpu3));
- init_page_count(virt_to_page(trapbase_cpu3));
- free_page((unsigned long)trapbase_cpu3);
- totalram_pages++;
- num_physpages++;
- }
-
/* Ok, they are spinning and ready to go. */
}
SIGN1(sys32_getsockname, sys_getsockname, %o0)
SIGN2(sys32_ioprio_get, sys_ioprio_get, %o0, %o1)
SIGN3(sys32_ioprio_set, sys_ioprio_set, %o0, %o1, %o2)
-SIGN2(sys32_splice, sys_splice, %o0, %o1)
+SIGN2(sys32_splice, sys_splice, %o0, %o2)
SIGN2(sys32_sync_file_range, compat_sync_file_range, %o0, %o5)
SIGN2(sys32_tee, sys_tee, %o0, %o1)
SIGN1(sys32_vmsplice, compat_sys_vmsplice, %o0)
+SIGN1(sys32_truncate, sys_truncate, %o1)
+SIGN1(sys32_ftruncate, sys_ftruncate, %o1)
.globl sys32_mmap2
sys32_mmap2:
/*110*/ .word sys_setresgid, sys_getresgid, sys_setregid, sys_nis_syscall, sys_nis_syscall
.word sys32_getgroups, compat_sys_gettimeofday, sys32_getrusage, sys_nis_syscall, sys_getcwd
/*120*/ .word compat_sys_readv, compat_sys_writev, compat_sys_settimeofday, sys_fchown16, sys_fchmod
- .word sys_nis_syscall, sys_setreuid16, sys_setregid16, sys_rename, sys_truncate
-/*130*/ .word sys_ftruncate, sys_flock, compat_sys_lstat64, sys_nis_syscall, sys_nis_syscall
+ .word sys_nis_syscall, sys_setreuid16, sys_setregid16, sys_rename, sys32_truncate
+/*130*/ .word sys32_ftruncate, sys_flock, compat_sys_lstat64, sys_nis_syscall, sys_nis_syscall
.word sys_nis_syscall, sys32_mkdir, sys_rmdir, compat_sys_utimes, compat_sys_stat64
/*140*/ .word sys32_sendfile64, sys_nis_syscall, sys32_futex, sys_gettid, compat_sys_getrlimit
.word compat_sys_setrlimit, sys_pivot_root, sys32_prctl, sys_pciconfig_read, sys_pciconfig_write
*/
out_of_memory:
up_read(&mm->mmap_sem);
- printk("VM: killing process %s\n", tsk->comm);
- if (from_user)
- do_group_exit(SIGKILL);
+ if (from_user) {
+ pagefault_out_of_memory();
+ return;
+ }
goto no_context;
do_sigbus:
out_of_memory:
insn = get_fault_insn(regs, insn);
up_read(&mm->mmap_sem);
- printk("VM: killing process %s\n", current->comm);
- if (!(regs->tstate & TSTATE_PRIV))
- do_group_exit(SIGKILL);
+ if (!(regs->tstate & TSTATE_PRIV)) {
+ pagefault_out_of_memory();
+ return;
+ }
goto handle_kernel_fault;
intr_or_no_mm:
cmp_p64, NULL);
}
-unsigned long *sparc64_valid_addr_bitmap __read_mostly;
+unsigned long sparc64_valid_addr_bitmap[VALID_ADDR_BITMAP_BYTES /
+ sizeof(unsigned long)];
EXPORT_SYMBOL(sparc64_valid_addr_bitmap);
/* Kernel physical address base and size in bytes. */
* memory list again, and make sure it provides at least as much
* memory as 'pavail' does.
*/
-static void __init setup_valid_addr_bitmap_from_pavail(void)
+static void __init setup_valid_addr_bitmap_from_pavail(unsigned long *bitmap)
{
int i;
if (new_start <= old_start &&
new_end >= (old_start + PAGE_SIZE)) {
- set_bit(old_start >> 22,
- sparc64_valid_addr_bitmap);
+ set_bit(old_start >> 22, bitmap);
goto do_next_page;
}
}
}
}
+static void __init patch_tlb_miss_handler_bitmap(void)
+{
+ extern unsigned int valid_addr_bitmap_insn[];
+ extern unsigned int valid_addr_bitmap_patch[];
+
+ valid_addr_bitmap_insn[1] = valid_addr_bitmap_patch[1];
+ mb();
+ valid_addr_bitmap_insn[0] = valid_addr_bitmap_patch[0];
+ flushi(&valid_addr_bitmap_insn[0]);
+}
+
void __init mem_init(void)
{
unsigned long codepages, datapages, initpages;
unsigned long addr, last;
- int i;
-
- i = last_valid_pfn >> ((22 - PAGE_SHIFT) + 6);
- i += 1;
- sparc64_valid_addr_bitmap = (unsigned long *) alloc_bootmem(i << 3);
- if (sparc64_valid_addr_bitmap == NULL) {
- prom_printf("mem_init: Cannot alloc valid_addr_bitmap.\n");
- prom_halt();
- }
- memset(sparc64_valid_addr_bitmap, 0, i << 3);
addr = PAGE_OFFSET + kern_base;
last = PAGE_ALIGN(kern_size) + addr;
addr += PAGE_SIZE;
}
- setup_valid_addr_bitmap_from_pavail();
+ setup_valid_addr_bitmap_from_pavail(sparc64_valid_addr_bitmap);
+ patch_tlb_miss_handler_bitmap();
high_memory = __va(last_valid_pfn << PAGE_SHIFT);
#ifdef CONFIG_NEED_MULTIPLE_NODES
- for_each_online_node(i) {
- if (NODE_DATA(i)->node_spanned_pages != 0) {
- totalram_pages +=
- free_all_bootmem_node(NODE_DATA(i));
+ {
+ int i;
+ for_each_online_node(i) {
+ if (NODE_DATA(i)->node_spanned_pages != 0) {
+ totalram_pages +=
+ free_all_bootmem_node(NODE_DATA(i));
+ }
}
}
#else
* marked non-static so that assembler code can get at them.
*/
-#define MAX_PHYS_ADDRESS (1UL << 42UL)
-#define KPTE_BITMAP_CHUNK_SZ (256UL * 1024UL * 1024UL)
+#define MAX_PHYS_ADDRESS (1UL << 41UL)
+#define KPTE_BITMAP_CHUNK_SZ (256UL * 1024UL * 1024UL)
#define KPTE_BITMAP_BYTES \
((MAX_PHYS_ADDRESS / KPTE_BITMAP_CHUNK_SZ) / 8)
+#define VALID_ADDR_BITMAP_CHUNK_SZ (4UL * 1024UL * 1024UL)
+#define VALID_ADDR_BITMAP_BYTES \
+ ((MAX_PHYS_ADDRESS / VALID_ADDR_BITMAP_CHUNK_SZ) / 8)
extern unsigned long kern_linear_pte_xor[2];
extern unsigned long kpte_linear_bitmap[KPTE_BITMAP_BYTES / sizeof(unsigned long)];
/* Drop into the prom, but completely terminate the program.
* No chance of continuing.
*/
-void prom_halt(void)
+void notrace prom_halt(void)
{
#ifdef CONFIG_SUN_LDOMS
if (ldom_domaining_enabled)
*/
#include <linux/kernel.h>
+#include <linux/compiler.h>
#include <asm/openprom.h>
#include <asm/oplib.h>
static char ppbuf[1024];
-void
-prom_write(const char *buf, unsigned int n)
+void notrace prom_write(const char *buf, unsigned int n)
{
char ch;
}
}
-void
-prom_printf(const char *fmt, ...)
+void notrace prom_printf(const char *fmt, ...)
{
va_list args;
int i;
__free_page(pte);
}
-#define __pte_free_tlb(tlb,pte) \
+#define __pte_free_tlb(tlb,pte, address) \
do { \
pgtable_page_dtor(pte); \
tlb_remove_page((tlb),(pte)); \
free_page((unsigned long)pmd);
}
-#define __pmd_free_tlb(tlb,x) tlb_remove_page((tlb),virt_to_page(x))
+#define __pmd_free_tlb(tlb,x, address) tlb_remove_page((tlb),virt_to_page(x))
#endif
#define check_pgt_cache() do { } while (0)
__tlb_remove_tlb_entry(tlb, ptep, address); \
} while (0)
-#define pte_free_tlb(tlb, ptep) __pte_free_tlb(tlb, ptep)
+#define pte_free_tlb(tlb, ptep, addr) __pte_free_tlb(tlb, ptep, addr)
-#define pud_free_tlb(tlb, pudp) __pud_free_tlb(tlb, pudp)
+#define pud_free_tlb(tlb, pudp, addr) __pud_free_tlb(tlb, pudp, addr)
-#define pmd_free_tlb(tlb, pmdp) __pmd_free_tlb(tlb, pmdp)
+#define pmd_free_tlb(tlb, pmdp, addr) __pmd_free_tlb(tlb, pmdp, addr)
#define tlb_migrate_finish(mm) do {} while (0)
select HAVE_UNSTABLE_SCHED_CLOCK
select HAVE_IDE
select HAVE_OPROFILE
+ select HAVE_PERF_COUNTERS if (!M386 && !M486)
select HAVE_IOREMAP_PROT
select HAVE_KPROBES
select ARCH_WANT_OPTIONAL_GPIOLIB
bool "GART IOMMU support" if EMBEDDED
default y
select SWIOTLB
- select AGP
depends on X86_64 && PCI
---help---
Support for full DMA access of devices with 32bit memory access only
config X86_LOCAL_APIC
def_bool y
depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC
- select HAVE_PERF_COUNTERS if (!M386 && !M486)
config X86_IO_APIC
def_bool y
# create a compressed vmlinux image from the original vmlinux
#
-targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma head_$(BITS).o misc.o piggy.o
+targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma head_$(BITS).o misc.o piggy.o
KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2
KBUILD_CFLAGS += -fno-strict-aliasing -fPIC
int err;
if (!cpu_has_aes) {
- printk(KERN_ERR "Intel AES-NI instructions are not detected.\n");
+ printk(KERN_INFO "Intel AES-NI instructions are not detected.\n");
return -ENODEV;
}
if ((err = crypto_register_alg(&aesni_alg)))
#ifdef CONFIG_AMD_IOMMU
extern int amd_iommu_init(void);
extern int amd_iommu_init_dma_ops(void);
+extern int amd_iommu_init_passthrough(void);
extern void amd_iommu_detect(void);
extern irqreturn_t amd_iommu_int_handler(int irq, void *data);
extern void amd_iommu_flush_all_domains(void);
#define EVT_BUFFER_SIZE 8192 /* 512 entries */
#define EVT_LEN_MASK (0x9ULL << 56)
+#define PAGE_MODE_NONE 0x00
#define PAGE_MODE_1_LEVEL 0x01
#define PAGE_MODE_2_LEVEL 0x02
#define PAGE_MODE_3_LEVEL 0x03
-
-#define IOMMU_PDE_NL_0 0x000ULL
-#define IOMMU_PDE_NL_1 0x200ULL
-#define IOMMU_PDE_NL_2 0x400ULL
-#define IOMMU_PDE_NL_3 0x600ULL
-
-#define IOMMU_PTE_L2_INDEX(address) (((address) >> 30) & 0x1ffULL)
-#define IOMMU_PTE_L1_INDEX(address) (((address) >> 21) & 0x1ffULL)
-#define IOMMU_PTE_L0_INDEX(address) (((address) >> 12) & 0x1ffULL)
-
-#define IOMMU_MAP_SIZE_L1 (1ULL << 21)
-#define IOMMU_MAP_SIZE_L2 (1ULL << 30)
-#define IOMMU_MAP_SIZE_L3 (1ULL << 39)
+#define PAGE_MODE_4_LEVEL 0x04
+#define PAGE_MODE_5_LEVEL 0x05
+#define PAGE_MODE_6_LEVEL 0x06
+
+#define PM_LEVEL_SHIFT(x) (12 + ((x) * 9))
+#define PM_LEVEL_SIZE(x) (((x) < 6) ? \
+ ((1ULL << PM_LEVEL_SHIFT((x))) - 1): \
+ (0xffffffffffffffffULL))
+#define PM_LEVEL_INDEX(x, a) (((a) >> PM_LEVEL_SHIFT((x))) & 0x1ffULL)
+#define PM_LEVEL_ENC(x) (((x) << 9) & 0xe00ULL)
+#define PM_LEVEL_PDE(x, a) ((a) | PM_LEVEL_ENC((x)) | \
+ IOMMU_PTE_P | IOMMU_PTE_IR | IOMMU_PTE_IW)
+#define PM_PTE_LEVEL(pte) (((pte) >> 9) & 0x7ULL)
+
+#define PM_MAP_4k 0
+#define PM_ADDR_MASK 0x000ffffffffff000ULL
+#define PM_MAP_MASK(lvl) (PM_ADDR_MASK & \
+ (~((1ULL << (12 + ((lvl) * 9))) - 1)))
+#define PM_ALIGNED(lvl, addr) ((PM_MAP_MASK(lvl) & (addr)) == (addr))
#define IOMMU_PTE_P (1ULL << 0)
#define IOMMU_PTE_TV (1ULL << 1)
#define IOMMU_PTE_IR (1ULL << 61)
#define IOMMU_PTE_IW (1ULL << 62)
-#define IOMMU_L1_PDE(address) \
- ((address) | IOMMU_PDE_NL_1 | IOMMU_PTE_P | IOMMU_PTE_IR | IOMMU_PTE_IW)
-#define IOMMU_L2_PDE(address) \
- ((address) | IOMMU_PDE_NL_2 | IOMMU_PTE_P | IOMMU_PTE_IR | IOMMU_PTE_IW)
-
#define IOMMU_PAGE_MASK (((1ULL << 52) - 1) & ~0xfffULL)
#define IOMMU_PTE_PRESENT(pte) ((pte) & IOMMU_PTE_P)
#define IOMMU_PTE_PAGE(pte) (phys_to_virt((pte) & IOMMU_PAGE_MASK))
#define PD_DMA_OPS_MASK (1UL << 0) /* domain used for dma_ops */
#define PD_DEFAULT_MASK (1UL << 1) /* domain is a default dma_ops
domain for an IOMMU */
+#define PD_PASSTHROUGH_MASK (1UL << 2) /* domain has no page
+ translation */
+
extern bool amd_iommu_dump;
#define DUMP_printk(format, arg...) \
do { \
if (amd_iommu_dump) \
- printk(KERN_INFO "AMD IOMMU: " format, ## arg); \
+ printk(KERN_INFO "AMD-Vi: " format, ## arg); \
} while(0);
/*
int mode; /* paging mode (0-6 levels) */
u64 *pt_root; /* page table root pointer */
unsigned long flags; /* flags to find out type of domain */
+ bool updated; /* complete domain flush required */
unsigned dev_cnt; /* devices assigned to this domain */
void *priv; /* private data */
};
/* if one, we need to send a completion wait command */
bool need_sync;
+ /* becomes true if a command buffer reset is running */
+ bool reset_in_progress;
+
/* default dma_ops domain for that IOMMU */
struct dma_ops_domain *default_dom;
};
#endif /* CONFIG_AMD_IOMMU_STATS */
+/* some function prototypes */
+extern void amd_iommu_reset_cmd_buffer(struct amd_iommu *iommu);
+
#endif /* _ASM_X86_AMD_IOMMU_TYPES_H */
extern void *dma_generic_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_addr, gfp_t flag);
+static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
+{
+ if (!dev->dma_mask)
+ return 0;
+
+ return addr + size <= *dev->dma_mask;
+}
+
+static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+ return paddr;
+}
+
+static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
+{
+ return daddr;
+}
+
static inline void
dma_cache_sync(struct device *dev, void *vaddr, size_t size,
enum dma_data_direction dir)
#define efi_call_virt6(f, a1, a2, a3, a4, a5, a6) \
efi_call_virt(f, a1, a2, a3, a4, a5, a6)
-#define efi_ioremap(addr, size) ioremap_cache(addr, size)
+#define efi_ioremap(addr, size, type) ioremap_cache(addr, size)
#else /* !CONFIG_X86_32 */
efi_call6((void *)(efi.systab->runtime->f), (u64)(a1), (u64)(a2), \
(u64)(a3), (u64)(a4), (u64)(a5), (u64)(a6))
-extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size);
+extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size,
+ u32 type);
#endif /* CONFIG_X86_32 */
struct io_apic_irq_attr *irq_attr);
extern int (*ioapic_renumber_irq)(int ioapic, int irq);
extern void ioapic_init_mappings(void);
+extern void ioapic_insert_resources(void);
extern struct IO_APIC_route_entry **alloc_ioapic_entries(void);
extern void free_ioapic_entries(struct IO_APIC_route_entry **ioapic_entries);
#define io_apic_assign_pci_irqs 0
static const int timer_through_8259 = 0;
static inline void ioapic_init_mappings(void) { }
+static inline void ioapic_insert_resources(void) { }
static inline void probe_nr_irqs_gsi(void) { }
#endif
{
unsigned long flags;
+ /*
+ * Note: this needs to be "=r" not "=rm", because we have the
+ * stack offset from what gcc expects at the time the "pop" is
+ * executed, and so a memory reference with respect to the stack
+ * would end up using the wrong address.
+ */
asm volatile("# __raw_save_flags\n\t"
"pushf ; pop %0"
- : "=g" (flags)
+ : "=r" (flags)
: /* no input */
: "memory");
/* Pages for switcher itself, then two pages per cpu */
#define TOTAL_SWITCHER_PAGES (SHARED_SWITCHER_PAGES + 2 * nr_cpu_ids)
-/* We map at -4M (-2M when PAE is activated) for ease of mapping
- * into the guest (one PTE page). */
+/* We map at -4M (-2M for PAE) for ease of mapping (one PTE page). */
#ifdef CONFIG_X86_PAE
#define SWITCHER_ADDR 0xFFE00000
#else
#include <asm/hw_irq.h>
#include <asm/kvm_para.h>
-/*G:031 But first, how does our Guest contact the Host to ask for privileged
+/*G:030
+ * But first, how does our Guest contact the Host to ask for privileged
* operations? There are two ways: the direct way is to make a "hypercall",
* to make requests of the Host Itself.
*
- * We use the KVM hypercall mechanism. Seventeen hypercalls are
- * available: the hypercall number is put in the %eax register, and the
- * arguments (when required) are placed in %ebx, %ecx, %edx and %esi.
- * If a return value makes sense, it's returned in %eax.
+ * We use the KVM hypercall mechanism, though completely different hypercall
+ * numbers. Seventeen hypercalls are available: the hypercall number is put in
+ * the %eax register, and the arguments (when required) are placed in %ebx,
+ * %ecx, %edx and %esi. If a return value makes sense, it's returned in %eax.
*
* Grossly invalid calls result in Sudden Death at the hands of the vengeful
* Host, rather than returning failure. This reflects Winston Churchill's
- * definition of a gentleman: "someone who is only rude intentionally". */
-/*:*/
+ * definition of a gentleman: "someone who is only rude intentionally".
+:*/
/* Can't use our min() macro here: needs to be a constant */
#define LGUEST_IRQS (NR_IRQS < 32 ? NR_IRQS: 32)
#define LHCALL_RING_SIZE 64
struct hcall_args {
- /* These map directly onto eax, ebx, ecx, edx and esi
- * in struct lguest_regs */
+ /* These map directly onto eax/ebx/ecx/edx/esi in struct lguest_regs */
unsigned long arg0, arg1, arg2, arg3, arg4;
};
void __user *, size_t *, loff_t *);
extern int unknown_nmi_panic;
-void __trigger_all_cpu_backtrace(void);
-#define trigger_all_cpu_backtrace() __trigger_all_cpu_backtrace()
+void arch_trigger_all_cpu_backtrace(void);
+#define arch_trigger_all_cpu_backtrace arch_trigger_all_cpu_backtrace
static inline void localise_nmi_watchdog(void)
{
__free_page(pte);
}
-extern void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte);
+extern void ___pte_free_tlb(struct mmu_gather *tlb, struct page *pte);
+
+static inline void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte,
+ unsigned long address)
+{
+ ___pte_free_tlb(tlb, pte);
+}
static inline void pmd_populate_kernel(struct mm_struct *mm,
pmd_t *pmd, pte_t *pte)
free_page((unsigned long)pmd);
}
-extern void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd);
+extern void ___pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd);
+
+static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd,
+ unsigned long adddress)
+{
+ ___pmd_free_tlb(tlb, pmd);
+}
#ifdef CONFIG_X86_PAE
extern void pud_populate(struct mm_struct *mm, pud_t *pudp, pmd_t *pmd);
free_page((unsigned long)pud);
}
-extern void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud);
+extern void ___pud_free_tlb(struct mmu_gather *tlb, pud_t *pud);
+
+static inline void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud,
+ unsigned long address)
+{
+ ___pud_free_tlb(tlb, pud);
+}
+
#endif /* PAGETABLE_LEVELS > 3 */
#endif /* PAGETABLE_LEVELS > 2 */
#define _ASM_X86_PGTABLE_H
#include <asm/page.h>
+#include <asm/e820.h>
#include <asm/pgtable_types.h>
#define canon_pgprot(p) __pgprot(massage_pgprot(p))
-static inline int is_new_memtype_allowed(unsigned long flags,
- unsigned long new_flags)
+static inline int is_new_memtype_allowed(u64 paddr, unsigned long size,
+ unsigned long flags,
+ unsigned long new_flags)
{
+ /*
+ * PAT type is always WB for ISA. So no need to check.
+ */
+ if (is_ISA_range(paddr, paddr + size - 1))
+ return 1;
+
/*
* Certain new memtypes are not allowed with certain
* requested memtype:
: "A" ((typeof(*(ptr)))(x)), "c" (ptr) : "ebx")
#else
#define __put_user_asm_u64(x, ptr, retval, errret) \
- __put_user_asm(x, ptr, retval, "q", "", "Zr", errret)
+ __put_user_asm(x, ptr, retval, "q", "", "er", errret)
#define __put_user_asm_ex_u64(x, addr) \
- __put_user_asm_ex(x, addr, "q", "", "Zr")
+ __put_user_asm_ex(x, addr, "q", "", "er")
#define __put_user_x8(x, ptr, __ret_pu) __put_user_x(8, x, ptr, __ret_pu)
#endif
ret, "l", "k", "ir", 4);
return ret;
case 8:__put_user_asm(*(u64 *)src, (u64 __user *)dst,
- ret, "q", "", "ir", 8);
+ ret, "q", "", "er", 8);
return ret;
case 10:
__put_user_asm(*(u64 *)src, (u64 __user *)dst,
- ret, "q", "", "ir", 10);
+ ret, "q", "", "er", 10);
if (unlikely(ret))
return ret;
asm("":::"memory");
return ret;
case 16:
__put_user_asm(*(u64 *)src, (u64 __user *)dst,
- ret, "q", "", "ir", 16);
+ ret, "q", "", "er", 16);
if (unlikely(ret))
return ret;
asm("":::"memory");
__put_user_asm(1[(u64 *)src], 1 + (u64 __user *)dst,
- ret, "q", "", "ir", 8);
+ ret, "q", "", "er", 8);
return ret;
default:
return copy_user_generic((__force void *)dst, src, size);
ret, "q", "", "=r", 8);
if (likely(!ret))
__put_user_asm(tmp, (u64 __user *)dst,
- ret, "q", "", "ir", 8);
+ ret, "q", "", "er", 8);
return ret;
}
default:
* see table 4.2.3.0.1 in broacast_assist spec.
*/
struct bau_msg_header {
- unsigned int dest_subnodeid:6; /* must be zero */
+ unsigned int dest_subnodeid:6; /* must be 0x10, for the LB */
/* bits 5:0 */
unsigned int base_dest_nodeid:15; /* nasid>>1 (pnode) of */
/* bits 20:6 */ /* first bit in node_map */
#define UV_GLOBAL_MMR32_PNODE_BITS(p) ((p) << (UV_GLOBAL_MMR32_PNODE_SHIFT))
#define UV_GLOBAL_MMR64_PNODE_BITS(p) \
- ((unsigned long)(UV_PNODE_TO_GNODE(p)) << UV_GLOBAL_MMR64_PNODE_SHIFT)
+ (((unsigned long)(p)) << UV_GLOBAL_MMR64_PNODE_SHIFT)
#define UV_APIC_PNODE_SHIFT 6
unsigned short nr_possible_cpus;
unsigned short nr_online_cpus;
unsigned short pnode;
+ short memory_nid;
};
extern struct uv_blade_info *uv_blade_info;
extern short *uv_node_to_blade;
return uv_blade_info[bid].pnode;
}
+/* Nid of memory node on blade. -1 if no blade-local memory */
+static inline int uv_blade_to_memory_nid(int bid)
+{
+ return uv_blade_info[bid].memory_nid;
+}
+
/* Determine the number of possible cpus on a blade */
static inline int uv_blade_nr_possible_cpus(int bid)
{
static LIST_HEAD(iommu_pd_list);
static DEFINE_SPINLOCK(iommu_pd_list_lock);
-#ifdef CONFIG_IOMMU_API
+/*
+ * Domain for untranslated devices - only allocated
+ * if iommu=pt passed on kernel cmd line.
+ */
+static struct protection_domain *pt_domain;
+
static struct iommu_ops amd_iommu_ops;
-#endif
/*
* general struct to manage commands send to an IOMMU
static int dma_ops_unity_map(struct dma_ops_domain *dma_dom,
struct unity_map_entry *e);
static struct dma_ops_domain *find_protection_domain(u16 devid);
-static u64* alloc_pte(struct protection_domain *dom,
- unsigned long address, u64
- **pte_page, gfp_t gfp);
+static u64 *alloc_pte(struct protection_domain *domain,
+ unsigned long address, int end_lvl,
+ u64 **pte_page, gfp_t gfp);
static void dma_ops_reserve_addresses(struct dma_ops_domain *dom,
unsigned long start_page,
unsigned int pages);
-
-#ifndef BUS_NOTIFY_UNBOUND_DRIVER
-#define BUS_NOTIFY_UNBOUND_DRIVER 0x0005
-#endif
+static void reset_iommu_command_buffer(struct amd_iommu *iommu);
+static u64 *fetch_pte(struct protection_domain *domain,
+ unsigned long address, int map_size);
+static void update_domain(struct protection_domain *domain);
#ifdef CONFIG_AMD_IOMMU_STATS
*
****************************************************************************/
-static void iommu_print_event(void *__evt)
+static void dump_dte_entry(u16 devid)
+{
+ int i;
+
+ for (i = 0; i < 8; ++i)
+ pr_err("AMD-Vi: DTE[%d]: %08x\n", i,
+ amd_iommu_dev_table[devid].data[i]);
+}
+
+static void dump_command(unsigned long phys_addr)
+{
+ struct iommu_cmd *cmd = phys_to_virt(phys_addr);
+ int i;
+
+ for (i = 0; i < 4; ++i)
+ pr_err("AMD-Vi: CMD[%d]: %08x\n", i, cmd->data[i]);
+}
+
+static void iommu_print_event(struct amd_iommu *iommu, void *__evt)
{
u32 *event = __evt;
int type = (event[1] >> EVENT_TYPE_SHIFT) & EVENT_TYPE_MASK;
int flags = (event[1] >> EVENT_FLAGS_SHIFT) & EVENT_FLAGS_MASK;
u64 address = (u64)(((u64)event[3]) << 32) | event[2];
- printk(KERN_ERR "AMD IOMMU: Event logged [");
+ printk(KERN_ERR "AMD-Vi: Event logged [");
switch (type) {
case EVENT_TYPE_ILL_DEV:
"address=0x%016llx flags=0x%04x]\n",
PCI_BUS(devid), PCI_SLOT(devid), PCI_FUNC(devid),
address, flags);
+ dump_dte_entry(devid);
break;
case EVENT_TYPE_IO_FAULT:
printk("IO_PAGE_FAULT device=%02x:%02x.%x "
break;
case EVENT_TYPE_ILL_CMD:
printk("ILLEGAL_COMMAND_ERROR address=0x%016llx]\n", address);
+ reset_iommu_command_buffer(iommu);
+ dump_command(address);
break;
case EVENT_TYPE_CMD_HARD_ERR:
printk("COMMAND_HARDWARE_ERROR address=0x%016llx "
tail = readl(iommu->mmio_base + MMIO_EVT_TAIL_OFFSET);
while (head != tail) {
- iommu_print_event(iommu->evt_buf + head);
+ iommu_print_event(iommu, iommu->evt_buf + head);
head = (head + EVENT_ENTRY_SIZE) % iommu->evt_buf_size;
}
status &= ~MMIO_STATUS_COM_WAIT_INT_MASK;
writel(status, iommu->mmio_base + MMIO_STATUS_OFFSET);
- if (unlikely(i == EXIT_LOOP_COUNT))
- panic("AMD IOMMU: Completion wait loop failed\n");
+ if (unlikely(i == EXIT_LOOP_COUNT)) {
+ spin_unlock(&iommu->lock);
+ reset_iommu_command_buffer(iommu);
+ spin_lock(&iommu->lock);
+ }
}
/*
iommu_queue_inv_iommu_pages(iommu, address, domid, 1, 1);
}
+/*
+ * This function flushes one domain on one IOMMU
+ */
+static void flush_domain_on_iommu(struct amd_iommu *iommu, u16 domid)
+{
+ struct iommu_cmd cmd;
+ unsigned long flags;
+
+ __iommu_build_inv_iommu_pages(&cmd, CMD_INV_IOMMU_ALL_PAGES_ADDRESS,
+ domid, 1, 1);
+
+ spin_lock_irqsave(&iommu->lock, flags);
+ __iommu_queue_command(iommu, &cmd);
+ __iommu_completion_wait(iommu);
+ __iommu_wait_for_completion(iommu);
+ spin_unlock_irqrestore(&iommu->lock, flags);
+}
+
+static void flush_all_domains_on_iommu(struct amd_iommu *iommu)
+{
+ int i;
+
+ for (i = 1; i < MAX_DOMAIN_ID; ++i) {
+ if (!test_bit(i, amd_iommu_pd_alloc_bitmap))
+ continue;
+ flush_domain_on_iommu(iommu, i);
+ }
+
+}
+
/*
* This function is used to flush the IO/TLB for a given protection domain
* on every IOMMU in the system
*/
static void iommu_flush_domain(u16 domid)
{
- unsigned long flags;
struct amd_iommu *iommu;
- struct iommu_cmd cmd;
INC_STATS_COUNTER(domain_flush_all);
- __iommu_build_inv_iommu_pages(&cmd, CMD_INV_IOMMU_ALL_PAGES_ADDRESS,
- domid, 1, 1);
-
- for_each_iommu(iommu) {
- spin_lock_irqsave(&iommu->lock, flags);
- __iommu_queue_command(iommu, &cmd);
- __iommu_completion_wait(iommu);
- __iommu_wait_for_completion(iommu);
- spin_unlock_irqrestore(&iommu->lock, flags);
- }
+ for_each_iommu(iommu)
+ flush_domain_on_iommu(iommu, domid);
}
void amd_iommu_flush_all_domains(void)
+{
+ struct amd_iommu *iommu;
+
+ for_each_iommu(iommu)
+ flush_all_domains_on_iommu(iommu);
+}
+
+static void flush_all_devices_for_iommu(struct amd_iommu *iommu)
{
int i;
- for (i = 1; i < MAX_DOMAIN_ID; ++i) {
- if (!test_bit(i, amd_iommu_pd_alloc_bitmap))
+ for (i = 0; i <= amd_iommu_last_bdf; ++i) {
+ if (iommu != amd_iommu_rlookup_table[i])
continue;
- iommu_flush_domain(i);
+
+ iommu_queue_inv_dev_entry(iommu, i);
+ iommu_completion_wait(iommu);
}
}
-void amd_iommu_flush_all_devices(void)
+static void flush_devices_by_domain(struct protection_domain *domain)
{
struct amd_iommu *iommu;
int i;
for (i = 0; i <= amd_iommu_last_bdf; ++i) {
- if (amd_iommu_pd_table[i] == NULL)
+ if ((domain == NULL && amd_iommu_pd_table[i] == NULL) ||
+ (amd_iommu_pd_table[i] != domain))
continue;
iommu = amd_iommu_rlookup_table[i];
}
}
+static void reset_iommu_command_buffer(struct amd_iommu *iommu)
+{
+ pr_err("AMD-Vi: Resetting IOMMU command buffer\n");
+
+ if (iommu->reset_in_progress)
+ panic("AMD-Vi: ILLEGAL_COMMAND_ERROR while resetting command buffer\n");
+
+ iommu->reset_in_progress = true;
+
+ amd_iommu_reset_cmd_buffer(iommu);
+ flush_all_devices_for_iommu(iommu);
+ flush_all_domains_on_iommu(iommu);
+
+ iommu->reset_in_progress = false;
+}
+
+void amd_iommu_flush_all_devices(void)
+{
+ flush_devices_by_domain(NULL);
+}
+
/****************************************************************************
*
* The functions below are used the create the page table mappings for
static int iommu_map_page(struct protection_domain *dom,
unsigned long bus_addr,
unsigned long phys_addr,
- int prot)
+ int prot,
+ int map_size)
{
u64 __pte, *pte;
bus_addr = PAGE_ALIGN(bus_addr);
phys_addr = PAGE_ALIGN(phys_addr);
- /* only support 512GB address spaces for now */
- if (bus_addr > IOMMU_MAP_SIZE_L3 || !(prot & IOMMU_PROT_MASK))
+ BUG_ON(!PM_ALIGNED(map_size, bus_addr));
+ BUG_ON(!PM_ALIGNED(map_size, phys_addr));
+
+ if (!(prot & IOMMU_PROT_MASK))
return -EINVAL;
- pte = alloc_pte(dom, bus_addr, NULL, GFP_KERNEL);
+ pte = alloc_pte(dom, bus_addr, map_size, NULL, GFP_KERNEL);
if (IOMMU_PTE_PRESENT(*pte))
return -EBUSY;
*pte = __pte;
+ update_domain(dom);
+
return 0;
}
static void iommu_unmap_page(struct protection_domain *dom,
- unsigned long bus_addr)
+ unsigned long bus_addr, int map_size)
{
- u64 *pte;
-
- pte = &dom->pt_root[IOMMU_PTE_L2_INDEX(bus_addr)];
-
- if (!IOMMU_PTE_PRESENT(*pte))
- return;
-
- pte = IOMMU_PTE_PAGE(*pte);
- pte = &pte[IOMMU_PTE_L1_INDEX(bus_addr)];
+ u64 *pte = fetch_pte(dom, bus_addr, map_size);
- if (!IOMMU_PTE_PRESENT(*pte))
- return;
-
- pte = IOMMU_PTE_PAGE(*pte);
- pte = &pte[IOMMU_PTE_L1_INDEX(bus_addr)];
-
- *pte = 0;
+ if (pte)
+ *pte = 0;
}
/*
for (addr = e->address_start; addr < e->address_end;
addr += PAGE_SIZE) {
- ret = iommu_map_page(&dma_dom->domain, addr, addr, e->prot);
+ ret = iommu_map_page(&dma_dom->domain, addr, addr, e->prot,
+ PM_MAP_4k);
if (ret)
return ret;
/*
* This function checks if there is a PTE for a given dma address. If
* there is one, it returns the pointer to it.
*/
-static u64* fetch_pte(struct protection_domain *domain,
- unsigned long address)
+static u64 *fetch_pte(struct protection_domain *domain,
+ unsigned long address, int map_size)
{
+ int level;
u64 *pte;
- pte = &domain->pt_root[IOMMU_PTE_L2_INDEX(address)];
+ level = domain->mode - 1;
+ pte = &domain->pt_root[PM_LEVEL_INDEX(level, address)];
- if (!IOMMU_PTE_PRESENT(*pte))
- return NULL;
+ while (level > map_size) {
+ if (!IOMMU_PTE_PRESENT(*pte))
+ return NULL;
- pte = IOMMU_PTE_PAGE(*pte);
- pte = &pte[IOMMU_PTE_L1_INDEX(address)];
+ level -= 1;
- if (!IOMMU_PTE_PRESENT(*pte))
- return NULL;
+ pte = IOMMU_PTE_PAGE(*pte);
+ pte = &pte[PM_LEVEL_INDEX(level, address)];
- pte = IOMMU_PTE_PAGE(*pte);
- pte = &pte[IOMMU_PTE_L0_INDEX(address)];
+ if ((PM_PTE_LEVEL(*pte) == 0) && level != map_size) {
+ pte = NULL;
+ break;
+ }
+ }
return pte;
}
u64 *pte, *pte_page;
for (i = 0; i < num_ptes; ++i) {
- pte = alloc_pte(&dma_dom->domain, address,
+ pte = alloc_pte(&dma_dom->domain, address, PM_MAP_4k,
&pte_page, gfp);
if (!pte)
goto out_free;
for (i = dma_dom->aperture[index]->offset;
i < dma_dom->aperture_size;
i += PAGE_SIZE) {
- u64 *pte = fetch_pte(&dma_dom->domain, i);
+ u64 *pte = fetch_pte(&dma_dom->domain, i, PM_MAP_4k);
if (!pte || !IOMMU_PTE_PRESENT(*pte))
continue;
dma_ops_reserve_addresses(dma_dom, i << PAGE_SHIFT, 1);
}
+ update_domain(&dma_dom->domain);
+
return 0;
out_free:
+ update_domain(&dma_dom->domain);
+
free_page((unsigned long)dma_dom->aperture[index]->bitmap);
kfree(dma_dom->aperture[index]);
dma_dom->domain.id = domain_id_alloc();
if (dma_dom->domain.id == 0)
goto free_dma_dom;
- dma_dom->domain.mode = PAGE_MODE_3_LEVEL;
+ dma_dom->domain.mode = PAGE_MODE_2_LEVEL;
dma_dom->domain.pt_root = (void *)get_zeroed_page(GFP_KERNEL);
dma_dom->domain.flags = PD_DMA_OPS_MASK;
dma_dom->domain.priv = dma_dom;
return dom;
}
+static void set_dte_entry(u16 devid, struct protection_domain *domain)
+{
+ u64 pte_root = virt_to_phys(domain->pt_root);
+
+ pte_root |= (domain->mode & DEV_ENTRY_MODE_MASK)
+ << DEV_ENTRY_MODE_SHIFT;
+ pte_root |= IOMMU_PTE_IR | IOMMU_PTE_IW | IOMMU_PTE_P | IOMMU_PTE_TV;
+
+ amd_iommu_dev_table[devid].data[2] = domain->id;
+ amd_iommu_dev_table[devid].data[1] = upper_32_bits(pte_root);
+ amd_iommu_dev_table[devid].data[0] = lower_32_bits(pte_root);
+
+ amd_iommu_pd_table[devid] = domain;
+}
+
+/*
+ * If a device is not yet associated with a domain, this function does
+ * assigns it visible for the hardware
+ */
+static void __attach_device(struct amd_iommu *iommu,
+ struct protection_domain *domain,
+ u16 devid)
+{
+ /* lock domain */
+ spin_lock(&domain->lock);
+
+ /* update DTE entry */
+ set_dte_entry(devid, domain);
+
+ domain->dev_cnt += 1;
+
+ /* ready */
+ spin_unlock(&domain->lock);
+}
+
/*
* If a device is not yet associated with a domain, this function does
* assigns it visible for the hardware
u16 devid)
{
unsigned long flags;
- u64 pte_root = virt_to_phys(domain->pt_root);
-
- domain->dev_cnt += 1;
-
- pte_root |= (domain->mode & DEV_ENTRY_MODE_MASK)
- << DEV_ENTRY_MODE_SHIFT;
- pte_root |= IOMMU_PTE_IR | IOMMU_PTE_IW | IOMMU_PTE_P | IOMMU_PTE_TV;
write_lock_irqsave(&amd_iommu_devtable_lock, flags);
- amd_iommu_dev_table[devid].data[0] = lower_32_bits(pte_root);
- amd_iommu_dev_table[devid].data[1] = upper_32_bits(pte_root);
- amd_iommu_dev_table[devid].data[2] = domain->id;
-
- amd_iommu_pd_table[devid] = domain;
+ __attach_device(iommu, domain, devid);
write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
- /*
- * We might boot into a crash-kernel here. The crashed kernel
- * left the caches in the IOMMU dirty. So we have to flush
- * here to evict all dirty stuff.
- */
+ /*
+ * We might boot into a crash-kernel here. The crashed kernel
+ * left the caches in the IOMMU dirty. So we have to flush
+ * here to evict all dirty stuff.
+ */
iommu_queue_inv_dev_entry(iommu, devid);
iommu_flush_tlb_pde(iommu, domain->id);
}
/* ready */
spin_unlock(&domain->lock);
+
+ /*
+ * If we run in passthrough mode the device must be assigned to the
+ * passthrough domain if it is detached from any other domain
+ */
+ if (iommu_pass_through) {
+ struct amd_iommu *iommu = amd_iommu_rlookup_table[devid];
+ __attach_device(iommu, pt_domain, devid);
+ }
}
/*
case BUS_NOTIFY_UNBOUND_DRIVER:
if (!domain)
goto out;
+ if (iommu_pass_through)
+ break;
detach_device(domain, devid);
break;
case BUS_NOTIFY_ADD_DEVICE:
return 1;
}
+static void update_device_table(struct protection_domain *domain)
+{
+ unsigned long flags;
+ int i;
+
+ for (i = 0; i <= amd_iommu_last_bdf; ++i) {
+ if (amd_iommu_pd_table[i] != domain)
+ continue;
+ write_lock_irqsave(&amd_iommu_devtable_lock, flags);
+ set_dte_entry(i, domain);
+ write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
+ }
+}
+
+static void update_domain(struct protection_domain *domain)
+{
+ if (!domain->updated)
+ return;
+
+ update_device_table(domain);
+ flush_devices_by_domain(domain);
+ iommu_flush_domain(domain->id);
+
+ domain->updated = false;
+}
+
/*
- * If the pte_page is not yet allocated this function is called
+ * This function is used to add another level to an IO page table. Adding
+ * another level increases the size of the address space by 9 bits to a size up
+ * to 64 bits.
*/
-static u64* alloc_pte(struct protection_domain *dom,
- unsigned long address, u64 **pte_page, gfp_t gfp)
+static bool increase_address_space(struct protection_domain *domain,
+ gfp_t gfp)
+{
+ u64 *pte;
+
+ if (domain->mode == PAGE_MODE_6_LEVEL)
+ /* address space already 64 bit large */
+ return false;
+
+ pte = (void *)get_zeroed_page(gfp);
+ if (!pte)
+ return false;
+
+ *pte = PM_LEVEL_PDE(domain->mode,
+ virt_to_phys(domain->pt_root));
+ domain->pt_root = pte;
+ domain->mode += 1;
+ domain->updated = true;
+
+ return true;
+}
+
+static u64 *alloc_pte(struct protection_domain *domain,
+ unsigned long address,
+ int end_lvl,
+ u64 **pte_page,
+ gfp_t gfp)
{
u64 *pte, *page;
+ int level;
- pte = &dom->pt_root[IOMMU_PTE_L2_INDEX(address)];
+ while (address > PM_LEVEL_SIZE(domain->mode))
+ increase_address_space(domain, gfp);
- if (!IOMMU_PTE_PRESENT(*pte)) {
- page = (u64 *)get_zeroed_page(gfp);
- if (!page)
- return NULL;
- *pte = IOMMU_L2_PDE(virt_to_phys(page));
- }
+ level = domain->mode - 1;
+ pte = &domain->pt_root[PM_LEVEL_INDEX(level, address)];
- pte = IOMMU_PTE_PAGE(*pte);
- pte = &pte[IOMMU_PTE_L1_INDEX(address)];
+ while (level > end_lvl) {
+ if (!IOMMU_PTE_PRESENT(*pte)) {
+ page = (u64 *)get_zeroed_page(gfp);
+ if (!page)
+ return NULL;
+ *pte = PM_LEVEL_PDE(level, virt_to_phys(page));
+ }
- if (!IOMMU_PTE_PRESENT(*pte)) {
- page = (u64 *)get_zeroed_page(gfp);
- if (!page)
- return NULL;
- *pte = IOMMU_L1_PDE(virt_to_phys(page));
- }
+ level -= 1;
- pte = IOMMU_PTE_PAGE(*pte);
+ pte = IOMMU_PTE_PAGE(*pte);
- if (pte_page)
- *pte_page = pte;
+ if (pte_page && level == end_lvl)
+ *pte_page = pte;
- pte = &pte[IOMMU_PTE_L0_INDEX(address)];
+ pte = &pte[PM_LEVEL_INDEX(level, address)];
+ }
return pte;
}
pte = aperture->pte_pages[APERTURE_PAGE_INDEX(address)];
if (!pte) {
- pte = alloc_pte(&dom->domain, address, &pte_page, GFP_ATOMIC);
+ pte = alloc_pte(&dom->domain, address, PM_MAP_4k, &pte_page,
+ GFP_ATOMIC);
aperture->pte_pages[APERTURE_PAGE_INDEX(address)] = pte_page;
} else
- pte += IOMMU_PTE_L0_INDEX(address);
+ pte += PM_LEVEL_INDEX(0, address);
+
+ update_domain(&dom->domain);
return pte;
}
if (!pte)
return;
- pte += IOMMU_PTE_L0_INDEX(address);
+ pte += PM_LEVEL_INDEX(0, address);
WARN_ON(!*pte);
write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
}
-static int amd_iommu_domain_init(struct iommu_domain *dom)
+static void protection_domain_free(struct protection_domain *domain)
+{
+ if (!domain)
+ return;
+
+ if (domain->id)
+ domain_id_free(domain->id);
+
+ kfree(domain);
+}
+
+static struct protection_domain *protection_domain_alloc(void)
{
struct protection_domain *domain;
domain = kzalloc(sizeof(*domain), GFP_KERNEL);
if (!domain)
- return -ENOMEM;
+ return NULL;
spin_lock_init(&domain->lock);
- domain->mode = PAGE_MODE_3_LEVEL;
domain->id = domain_id_alloc();
if (!domain->id)
+ goto out_err;
+
+ return domain;
+
+out_err:
+ kfree(domain);
+
+ return NULL;
+}
+
+static int amd_iommu_domain_init(struct iommu_domain *dom)
+{
+ struct protection_domain *domain;
+
+ domain = protection_domain_alloc();
+ if (!domain)
goto out_free;
+
+ domain->mode = PAGE_MODE_3_LEVEL;
domain->pt_root = (void *)get_zeroed_page(GFP_KERNEL);
if (!domain->pt_root)
goto out_free;
return 0;
out_free:
- kfree(domain);
+ protection_domain_free(domain);
return -ENOMEM;
}
paddr &= PAGE_MASK;
for (i = 0; i < npages; ++i) {
- ret = iommu_map_page(domain, iova, paddr, prot);
+ ret = iommu_map_page(domain, iova, paddr, prot, PM_MAP_4k);
if (ret)
return ret;
iova &= PAGE_MASK;
for (i = 0; i < npages; ++i) {
- iommu_unmap_page(domain, iova);
+ iommu_unmap_page(domain, iova, PM_MAP_4k);
iova += PAGE_SIZE;
}
phys_addr_t paddr;
u64 *pte;
- pte = &domain->pt_root[IOMMU_PTE_L2_INDEX(iova)];
-
- if (!IOMMU_PTE_PRESENT(*pte))
- return 0;
-
- pte = IOMMU_PTE_PAGE(*pte);
- pte = &pte[IOMMU_PTE_L1_INDEX(iova)];
-
- if (!IOMMU_PTE_PRESENT(*pte))
- return 0;
-
- pte = IOMMU_PTE_PAGE(*pte);
- pte = &pte[IOMMU_PTE_L0_INDEX(iova)];
+ pte = fetch_pte(domain, iova, PM_MAP_4k);
- if (!IOMMU_PTE_PRESENT(*pte))
+ if (!pte || !IOMMU_PTE_PRESENT(*pte))
return 0;
paddr = *pte & IOMMU_PAGE_MASK;
.domain_has_cap = amd_iommu_domain_has_cap,
};
+/*****************************************************************************
+ *
+ * The next functions do a basic initialization of IOMMU for pass through
+ * mode
+ *
+ * In passthrough mode the IOMMU is initialized and enabled but not used for
+ * DMA-API translation.
+ *
+ *****************************************************************************/
+
+int __init amd_iommu_init_passthrough(void)
+{
+ struct pci_dev *dev = NULL;
+ u16 devid, devid2;
+
+ /* allocate passthroug domain */
+ pt_domain = protection_domain_alloc();
+ if (!pt_domain)
+ return -ENOMEM;
+
+ pt_domain->mode |= PAGE_MODE_NONE;
+
+ while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+ struct amd_iommu *iommu;
+
+ devid = calc_devid(dev->bus->number, dev->devfn);
+ if (devid > amd_iommu_last_bdf)
+ continue;
+
+ devid2 = amd_iommu_alias_table[devid];
+
+ iommu = amd_iommu_rlookup_table[devid2];
+ if (!iommu)
+ continue;
+
+ __attach_device(iommu, pt_domain, devid);
+ __attach_device(iommu, pt_domain, devid2);
+ }
+
+ pr_info("AMD-Vi: Initialized for Passthrough Mode\n");
+
+ return 0;
+}
/* Function to enable the hardware */
static void iommu_enable(struct amd_iommu *iommu)
{
- printk(KERN_INFO "AMD IOMMU: Enabling IOMMU at %s cap 0x%hx\n",
+ printk(KERN_INFO "AMD-Vi: Enabling IOMMU at %s cap 0x%hx\n",
dev_name(&iommu->dev->dev), iommu->cap_ptr);
iommu_feature_enable(iommu, CONTROL_IOMMU_EN);
return cmd_buf;
}
+/*
+ * This function resets the command buffer if the IOMMU stopped fetching
+ * commands from it.
+ */
+void amd_iommu_reset_cmd_buffer(struct amd_iommu *iommu)
+{
+ iommu_feature_disable(iommu, CONTROL_CMDBUF_EN);
+
+ writel(0x00, iommu->mmio_base + MMIO_CMD_HEAD_OFFSET);
+ writel(0x00, iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
+
+ iommu_feature_enable(iommu, CONTROL_CMDBUF_EN);
+}
+
/*
* This function writes the command buffer address to the hardware and
* enables it.
memcpy_toio(iommu->mmio_base + MMIO_CMD_BUF_OFFSET,
&entry, sizeof(entry));
- /* set head and tail to zero manually */
- writel(0x00, iommu->mmio_base + MMIO_CMD_HEAD_OFFSET);
- writel(0x00, iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
-
- iommu_feature_enable(iommu, CONTROL_CMDBUF_EN);
+ amd_iommu_reset_cmd_buffer(iommu);
}
static void __init free_command_buffer(struct amd_iommu *iommu)
switch (*p) {
case ACPI_IVHD_TYPE:
- DUMP_printk("IOMMU: device: %02x:%02x.%01x cap: %04x "
+ DUMP_printk("device: %02x:%02x.%01x cap: %04x "
"seg: %d flags: %01x info %04x\n",
PCI_BUS(h->devid), PCI_SLOT(h->devid),
PCI_FUNC(h->devid), h->cap_ptr,
r = request_irq(iommu->dev->irq, amd_iommu_int_handler,
IRQF_SAMPLE_RANDOM,
- "AMD IOMMU",
+ "AMD-Vi",
NULL);
if (r) {
if (no_iommu) {
- printk(KERN_INFO "AMD IOMMU disabled by kernel command line\n");
+ printk(KERN_INFO "AMD-Vi disabled by kernel command line\n");
return 0;
}
if (ret)
goto free;
- ret = amd_iommu_init_dma_ops();
+ if (iommu_pass_through)
+ ret = amd_iommu_init_passthrough();
+ else
+ ret = amd_iommu_init_dma_ops();
if (ret)
goto free;
enable_iommus();
- printk(KERN_INFO "AMD IOMMU: device isolation ");
+ if (iommu_pass_through)
+ goto out;
+
+ printk(KERN_INFO "AMD-Vi: device isolation ");
if (amd_iommu_isolate)
printk("enabled\n");
else
printk("disabled\n");
if (amd_iommu_unmap_flush)
- printk(KERN_INFO "AMD IOMMU: IO/TLB flush on unmap enabled\n");
+ printk(KERN_INFO "AMD-Vi: IO/TLB flush on unmap enabled\n");
else
- printk(KERN_INFO "AMD IOMMU: Lazy IO/TLB flushing enabled\n");
+ printk(KERN_INFO "AMD-Vi: Lazy IO/TLB flushing enabled\n");
out:
return ret;
#include <linux/bitops.h>
#include <linux/ioport.h>
#include <linux/suspend.h>
+#include <linux/kmemleak.h>
#include <asm/e820.h>
#include <asm/io.h>
#include <asm/iommu.h>
* code for safe
*/
p = __alloc_bootmem_nopanic(aper_size, aper_size, 512ULL<<20);
+ /*
+ * Kmemleak should not scan this block as it may not be mapped via the
+ * kernel direct mapping.
+ */
+ kmemleak_ignore(p);
if (!p || __pa(p)+aper_size > 0xffffffff) {
printk(KERN_ERR
"Cannot allocate aperture memory hole (%p,%uK)\n",
return ret && es7000_apic_is_cluster();
}
-struct apic apic_es7000_cluster = {
+/* We've been warned by a false positive warning.Use __refdata to keep calm. */
+struct apic __refdata apic_es7000_cluster = {
.name = "es7000",
.probe = probe_es7000,
mmr_pnode = uv_blade_to_pnode(mmr_blade);
uv_write_global_mmr64(mmr_pnode, mmr_offset, mmr_value);
+ if (cfg->move_in_progress)
+ send_cleanup_vector(cfg);
+
return irq;
}
}
}
-static int __init ioapic_insert_resources(void)
+void __init ioapic_insert_resources(void)
{
int i;
struct resource *r = ioapic_resources;
if (!r) {
- if (nr_ioapics > 0) {
+ if (nr_ioapics > 0)
printk(KERN_ERR
"IO APIC resources couldn't be allocated.\n");
- return -1;
- }
- return 0;
+ return;
}
for (i = 0; i < nr_ioapics; i++) {
insert_resource(&iomem_resource, r);
r++;
}
-
- return 0;
}
-
-/* Insert the IO APIC resources after PCI initialization has occured to handle
- * IO APICS that are mapped in on a BAR in PCI space. */
-late_initcall(ioapic_insert_resources);
unsigned long mask = cpumask_bits(cpumask)[0];
unsigned long flags;
+ if (WARN_ONCE(!mask, "empty IPI mask"))
+ return;
+
local_irq_save(flags);
WARN_ON(mask & ~cpumask_bits(cpu_online_mask)[0]);
__default_send_IPI_dest_field(mask, vector, apic->dest_logical);
int unknown_nmi_panic;
int nmi_watchdog_enabled;
-static cpumask_var_t backtrace_mask;
+static cpumask_t backtrace_mask __read_mostly;
/* nmi_active:
* >0: the lapic NMI watchdog is active, but can be disabled
if (!prev_nmi_count)
goto error;
- alloc_cpumask_var(&backtrace_mask, GFP_KERNEL|__GFP_ZERO);
printk(KERN_INFO "Testing NMI watchdog ... ");
#ifdef CONFIG_SMP
}
/* We can be called before check_nmi_watchdog, hence NULL check. */
- if (backtrace_mask != NULL && cpumask_test_cpu(cpu, backtrace_mask)) {
+ if (cpumask_test_cpu(cpu, &backtrace_mask)) {
static DEFINE_SPINLOCK(lock); /* Serialise the printks */
spin_lock(&lock);
printk(KERN_WARNING "NMI backtrace for cpu %d\n", cpu);
+ show_regs(regs);
dump_stack();
spin_unlock(&lock);
- cpumask_clear_cpu(cpu, backtrace_mask);
+ cpumask_clear_cpu(cpu, &backtrace_mask);
+
+ rc = 1;
}
/* Could check oops_in_progress here too, but it's safer not to */
return 0;
}
-void __trigger_all_cpu_backtrace(void)
+void arch_trigger_all_cpu_backtrace(void)
{
int i;
- cpumask_copy(backtrace_mask, cpu_online_mask);
+ cpumask_copy(&backtrace_mask, cpu_online_mask);
+
+ printk(KERN_INFO "sending NMI to all CPUs:\n");
+ apic->send_IPI_all(NMI_VECTOR);
+
/* Wait for up to 10 seconds for all CPUs to do the backtrace */
for (i = 0; i < 10 * 1000; i++) {
- if (cpumask_empty(backtrace_mask))
+ if (cpumask_empty(&backtrace_mask))
break;
mdelay(1);
}
(u_long) xquad_portio, (u_long) num_quads*XQUAD_PORTIO_QUAD);
}
-struct apic apic_numaq = {
+/* Use __refdata to keep false positive warning calm. */
+struct apic __refdata apic_numaq = {
.name = "NUMAQ",
.probe = probe_numaq,
NULL,
};
+static int apicid_phys_pkg_id(int initial_apic_id, int index_msb)
+{
+ return hard_smp_processor_id() >> index_msb;
+}
+
/*
* Check the APIC IDs in bios_cpu_apicid and choose the APIC mode.
*/
printk(KERN_INFO "Setting APIC routing to %s\n", apic->name);
}
+ if (is_vsmp_box()) {
+ /* need to update phys_pkg_id */
+ apic->phys_pkg_id = apicid_phys_pkg_id;
+ }
+
/*
* Now that apic routing model is selected, configure the
* fault handling for intr remapping.
return x2apic_enabled();
}
-/* Start with all IRQs pointing to boot CPU. IRQ balancing will shift them. */
-
+/*
+ * need to use more than cpu 0, because we need more vectors when
+ * MSI-X are used.
+ */
static const struct cpumask *x2apic_target_cpus(void)
{
- return cpumask_of(0);
+ return cpu_online_mask;
}
/*
static int x2apic_cluster_phys_pkg_id(int initial_apicid, int index_msb)
{
- return current_cpu_data.initial_apicid >> index_msb;
+ return initial_apicid >> index_msb;
}
static void x2apic_send_IPI_self(int vector)
return 0;
}
-/* Start with all IRQs pointing to boot CPU. IRQ balancing will shift them. */
-
+/*
+ * need to use more than cpu 0, because we need more vectors when
+ * MSI-X are used.
+ */
static const struct cpumask *x2apic_target_cpus(void)
{
- return cpumask_of(0);
+ return cpu_online_mask;
}
static void x2apic_vector_allocation_domain(int cpu, struct cpumask *retmask)
static int x2apic_phys_pkg_id(int initial_apicid, int index_msb)
{
- return current_cpu_data.initial_apicid >> index_msb;
+ return initial_apicid >> index_msb;
}
static void x2apic_send_IPI_self(int vector)
return node_id.s.node_id;
}
-static int uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
if (!strcmp(oem_id, "SGI")) {
if (!strcmp(oem_table_id, "UVL"))
apic_write(APIC_SELF_IPI, vector);
}
-struct apic apic_x2apic_uv_x = {
+struct apic __refdata apic_x2apic_uv_x = {
.name = "UV large system",
.probe = NULL,
.apic_id_registered = uv_apic_id_registered,
.irq_delivery_mode = dest_Fixed,
- .irq_dest_mode = 1, /* logical */
+ .irq_dest_mode = 0, /* physical */
.target_cpus = uv_target_cpus,
.disable_esr = 0,
BUG();
}
-static __init void map_low_mmrs(void)
-{
- init_extra_mapping_uc(UV_GLOBAL_MMR32_BASE, UV_GLOBAL_MMR32_SIZE);
- init_extra_mapping_uc(UV_LOCAL_MMR_BASE, UV_LOCAL_MMR_SIZE);
-}
-
enum map_type {map_wb, map_uc};
static __init void map_high(char *id, unsigned long base, int shift,
map_high("GRU", gru.s.base, shift, max_pnode, map_wb);
}
-static __init void map_config_high(int max_pnode)
-{
- union uvh_rh_gam_cfg_overlay_config_mmr_u cfg;
- int shift = UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR_BASE_SHFT;
-
- cfg.v = uv_read_local_mmr(UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR);
- if (cfg.s.enable)
- map_high("CONFIG", cfg.s.base, shift, max_pnode, map_uc);
-}
-
-static __init void map_mmr_high(int max_pnode)
-{
- union uvh_rh_gam_mmr_overlay_config_mmr_u mmr;
- int shift = UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_SHFT;
-
- mmr.v = uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR);
- if (mmr.s.enable)
- map_high("MMR", mmr.s.base, shift, max_pnode, map_uc);
-}
-
static __init void map_mmioh_high(int max_pnode)
{
union uvh_rh_gam_mmioh_overlay_config_mmr_u mmioh;
unsigned long mmr_base, present, paddr;
unsigned short pnode_mask;
- map_low_mmrs();
-
m_n_config.v = uv_read_local_mmr(UVH_SI_ADDR_MAP_CONFIG);
m_val = m_n_config.s.m_skt;
n_val = m_n_config.s.n_skt;
bytes = sizeof(struct uv_blade_info) * uv_num_possible_blades();
uv_blade_info = kmalloc(bytes, GFP_KERNEL);
BUG_ON(!uv_blade_info);
+ for (blade = 0; blade < uv_num_possible_blades(); blade++)
+ uv_blade_info[blade].memory_nid = -1;
get_lowmem_redirect(&lowmem_redir_base, &lowmem_redir_size);
lcpu = uv_blade_info[blade].nr_possible_cpus;
uv_blade_info[blade].nr_possible_cpus++;
+ /* Any node on the blade, else will contain -1. */
+ uv_blade_info[blade].memory_nid = nid;
+
uv_cpu_hub_info(cpu)->lowmem_remap_base = lowmem_redir_base;
uv_cpu_hub_info(cpu)->lowmem_remap_top = lowmem_redir_size;
uv_cpu_hub_info(cpu)->m_val = m_val;
pnode = (paddr >> m_val) & pnode_mask;
blade = boot_pnode_to_blade(pnode);
uv_node_to_blade[nid] = blade;
+ max_pnode = max(pnode, max_pnode);
}
map_gru_high(max_pnode);
- map_mmr_high(max_pnode);
- map_config_high(max_pnode);
map_mmioh_high(max_pnode);
uv_cpu_init();
u8 ret = 0;
int idled = 0;
int polling;
- int err;
+ int err = 0;
polling = !!(current_thread_info()->status & TS_POLLING);
if (polling) {
CFLAGS_REMOVE_common.o = -pg
endif
+# Make sure load_percpu_segment has no stackprotector
+nostackp := $(call cc-option, -fno-stack-protector)
+CFLAGS_common.o := $(nostackp)
+
obj-y := intel_cacheinfo.o addon_cpuid_features.o
obj-y += proc.o capflags.o powerflags.o common.o
obj-y += vmware.o hypervisor.o
#endif
#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_PCI)
/* check CPU config space for extended APIC ID */
- if (c->x86 >= 0xf) {
+ if (cpu_has_apic && c->x86 >= 0xf) {
unsigned int val;
val = read_pci_config(0, 24, 0, 0x68);
if ((val & ((1 << 17) | (1 << 18))) == ((1 << 17) | (1 << 18)))
level = cpuid_eax(1);
if((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58)
set_cpu_cap(c, X86_FEATURE_REP_GOOD);
+
+ /*
+ * Some BIOSes incorrectly force this feature, but only K8
+ * revision D (model = 0x14) and later actually support it.
+ */
+ if (c->x86_model < 0x14)
+ clear_cpu_cap(c, X86_FEATURE_LAHF_LM);
}
if (c->x86 == 0x10 || c->x86 == 0x11)
set_cpu_cap(c, X86_FEATURE_REP_GOOD);
alloc_bootmem_cpumask_var(&cpu_sibling_setup_mask);
}
-static const struct cpu_dev *this_cpu __cpuinitdata;
+static void __cpuinit default_init(struct cpuinfo_x86 *c)
+{
+#ifdef CONFIG_X86_64
+ display_cacheinfo(c);
+#else
+ /* Not much we can do here... */
+ /* Check if at least it has cpuid */
+ if (c->cpuid_level == -1) {
+ /* No cpuid. It must be an ancient CPU */
+ if (c->x86 == 4)
+ strcpy(c->x86_model_id, "486");
+ else if (c->x86 == 3)
+ strcpy(c->x86_model_id, "386");
+ }
+#endif
+}
+
+static const struct cpu_dev __cpuinitconst default_cpu = {
+ .c_init = default_init,
+ .c_vendor = "Unknown",
+ .c_x86_vendor = X86_VENDOR_UNKNOWN,
+};
+
+static const struct cpu_dev *this_cpu __cpuinitdata = &default_cpu;
DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = {
#ifdef CONFIG_X86_64
static const struct cpu_dev *__cpuinitdata cpu_devs[X86_VENDOR_NUM] = {};
-static void __cpuinit default_init(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_X86_64
- display_cacheinfo(c);
-#else
- /* Not much we can do here... */
- /* Check if at least it has cpuid */
- if (c->cpuid_level == -1) {
- /* No cpuid. It must be an ancient CPU */
- if (c->x86 == 4)
- strcpy(c->x86_model_id, "486");
- else if (c->x86 == 3)
- strcpy(c->x86_model_id, "386");
- }
-#endif
-}
-
-static const struct cpu_dev __cpuinitconst default_cpu = {
- .c_init = default_init,
- .c_vendor = "Unknown",
- .c_x86_vendor = X86_VENDOR_UNKNOWN,
-};
-
static void __cpuinit get_model_name(struct cpuinfo_x86 *c)
{
unsigned int *v;
}
/* Add per CPU specific workarounds here */
-static void mce_cpu_quirks(struct cpuinfo_x86 *c)
+static int mce_cpu_quirks(struct cpuinfo_x86 *c)
{
+ if (c->x86_vendor == X86_VENDOR_UNKNOWN) {
+ pr_info("MCE: unknown CPU type - not enabling MCE support.\n");
+ return -EOPNOTSUPP;
+ }
+
/* This should be disabled by the BIOS, but isn't always */
if (c->x86_vendor == X86_VENDOR_AMD) {
if (c->x86 == 15 && banks > 4) {
if ((c->x86 > 6 || (c->x86 == 6 && c->x86_model >= 0xe)) &&
monarch_timeout < 0)
monarch_timeout = USEC_PER_SEC;
+
+ /*
+ * There are also broken BIOSes on some Pentium M and
+ * earlier systems:
+ */
+ if (c->x86 == 6 && c->x86_model <= 13 && mce_bootlog < 0)
+ mce_bootlog = 0;
}
if (monarch_timeout < 0)
monarch_timeout = 0;
if (mce_bootlog != 0)
mce_panic_timeout = 30;
+
+ return 0;
}
static void __cpuinit mce_ancient_init(struct cpuinfo_x86 *c)
if (!mce_available(c))
return;
- if (mce_cap_init() < 0) {
+ if (mce_cap_init() < 0 || mce_cpu_quirks(c) < 0) {
mce_disabled = 1;
return;
}
- mce_cpu_quirks(c);
machine_check_vector = do_machine_check;
const char *buf, size_t siz)
{
char *p;
- int len;
strncpy(mce_helper, buf, sizeof(mce_helper));
mce_helper[sizeof(mce_helper)-1] = 0;
- len = strlen(mce_helper);
p = strchr(mce_helper, '\n');
- if (*p)
+ if (p)
*p = 0;
- return len;
+ return strlen(mce_helper) + !!p;
}
static ssize_t set_ignore_ce(struct sys_device *s,
static DEFINE_PER_CPU(__u64, next_check) = INITIAL_JIFFIES;
static DEFINE_PER_CPU(unsigned long, thermal_throttle_count);
+static DEFINE_PER_CPU(bool, thermal_throttle_active);
static atomic_t therm_throt_en = ATOMIC_INIT(0);
{
unsigned int cpu = smp_processor_id();
__u64 tmp_jiffs = get_jiffies_64();
+ bool was_throttled = __get_cpu_var(thermal_throttle_active);
+ bool is_throttled = __get_cpu_var(thermal_throttle_active) = curr;
- if (curr)
+ if (is_throttled)
__get_cpu_var(thermal_throttle_count)++;
- if (time_before64(tmp_jiffs, __get_cpu_var(next_check)))
+ if (!(was_throttled ^ is_throttled) &&
+ time_before64(tmp_jiffs, __get_cpu_var(next_check)))
return 0;
__get_cpu_var(next_check) = tmp_jiffs + CHECK_INTERVAL;
/* if we just entered the thermal event */
- if (curr) {
+ if (is_throttled) {
printk(KERN_CRIT "CPU%d: Temperature above threshold, "
- "cpu clock throttled (total events = %lu)\n", cpu,
- __get_cpu_var(thermal_throttle_count));
+ "cpu clock throttled (total events = %lu)\n",
+ cpu, __get_cpu_var(thermal_throttle_count));
add_taint(TAINT_MACHINE_CHECK);
- } else {
- printk(KERN_CRIT "CPU%d: Temperature/speed normal\n", cpu);
+ return 1;
+ }
+ if (was_throttled) {
+ printk(KERN_INFO "CPU%d: Temperature/speed normal\n", cpu);
+ return 1;
}
- return 1;
+ return 0;
}
#ifdef CONFIG_SYSFS
int num_counters_fixed;
int counter_bits;
u64 counter_mask;
+ int apic;
u64 max_period;
u64 intel_ctrl;
};
.enabled = 1,
};
+/*
+ * Not sure about some of these
+ */
+static const u64 p6_perfmon_event_map[] =
+{
+ [PERF_COUNT_HW_CPU_CYCLES] = 0x0079,
+ [PERF_COUNT_HW_INSTRUCTIONS] = 0x00c0,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = 0x0f2e,
+ [PERF_COUNT_HW_CACHE_MISSES] = 0x012e,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x00c4,
+ [PERF_COUNT_HW_BRANCH_MISSES] = 0x00c5,
+ [PERF_COUNT_HW_BUS_CYCLES] = 0x0062,
+};
+
+static u64 p6_pmu_event_map(int event)
+{
+ return p6_perfmon_event_map[event];
+}
+
+/*
+ * Counter setting that is specified not to count anything.
+ * We use this to effectively disable a counter.
+ *
+ * L2_RQSTS with 0 MESI unit mask.
+ */
+#define P6_NOP_COUNTER 0x0000002EULL
+
+static u64 p6_pmu_raw_event(u64 event)
+{
+#define P6_EVNTSEL_EVENT_MASK 0x000000FFULL
+#define P6_EVNTSEL_UNIT_MASK 0x0000FF00ULL
+#define P6_EVNTSEL_EDGE_MASK 0x00040000ULL
+#define P6_EVNTSEL_INV_MASK 0x00800000ULL
+#define P6_EVNTSEL_COUNTER_MASK 0xFF000000ULL
+
+#define P6_EVNTSEL_MASK \
+ (P6_EVNTSEL_EVENT_MASK | \
+ P6_EVNTSEL_UNIT_MASK | \
+ P6_EVNTSEL_EDGE_MASK | \
+ P6_EVNTSEL_INV_MASK | \
+ P6_EVNTSEL_COUNTER_MASK)
+
+ return event & P6_EVNTSEL_MASK;
+}
+
+
/*
* Intel PerfMon v3. Used on Core2 and later.
*/
static bool reserve_pmc_hardware(void)
{
+#ifdef CONFIG_X86_LOCAL_APIC
int i;
if (nmi_watchdog == NMI_LOCAL_APIC)
if (!reserve_evntsel_nmi(x86_pmu.eventsel + i))
goto eventsel_fail;
}
+#endif
return true;
+#ifdef CONFIG_X86_LOCAL_APIC
eventsel_fail:
for (i--; i >= 0; i--)
release_evntsel_nmi(x86_pmu.eventsel + i);
enable_lapic_nmi_watchdog();
return false;
+#endif
}
static void release_pmc_hardware(void)
{
+#ifdef CONFIG_X86_LOCAL_APIC
int i;
for (i = 0; i < x86_pmu.num_counters; i++) {
if (nmi_watchdog == NMI_LOCAL_APIC)
enable_lapic_nmi_watchdog();
+#endif
}
static void hw_perf_counter_destroy(struct perf_counter *counter)
{
struct perf_counter_attr *attr = &counter->attr;
struct hw_perf_counter *hwc = &counter->hw;
+ u64 config;
int err;
if (!x86_pmu_initialized())
hwc->sample_period = x86_pmu.max_period;
hwc->last_period = hwc->sample_period;
atomic64_set(&hwc->period_left, hwc->sample_period);
+ } else {
+ /*
+ * If we have a PMU initialized but no APIC
+ * interrupts, we cannot sample hardware
+ * counters (user-space has to fall back and
+ * sample via a hrtimer based software counter):
+ */
+ if (!x86_pmu.apic)
+ return -EOPNOTSUPP;
}
counter->destroy = hw_perf_counter_destroy;
if (attr->config >= x86_pmu.max_events)
return -EINVAL;
+
/*
* The generic map:
*/
- hwc->config |= x86_pmu.event_map(attr->config);
+ config = x86_pmu.event_map(attr->config);
+
+ if (config == 0)
+ return -ENOENT;
+
+ if (config == -1LL)
+ return -EINVAL;
+
+ hwc->config |= config;
return 0;
}
+static void p6_pmu_disable_all(void)
+{
+ struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+ u64 val;
+
+ if (!cpuc->enabled)
+ return;
+
+ cpuc->enabled = 0;
+ barrier();
+
+ /* p6 only has one enable register */
+ rdmsrl(MSR_P6_EVNTSEL0, val);
+ val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE;
+ wrmsrl(MSR_P6_EVNTSEL0, val);
+}
+
static void intel_pmu_disable_all(void)
{
wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL, 0);
return x86_pmu.disable_all();
}
+static void p6_pmu_enable_all(void)
+{
+ struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+ unsigned long val;
+
+ if (cpuc->enabled)
+ return;
+
+ cpuc->enabled = 1;
+ barrier();
+
+ /* p6 only has one enable register */
+ rdmsrl(MSR_P6_EVNTSEL0, val);
+ val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+ wrmsrl(MSR_P6_EVNTSEL0, val);
+}
+
static void intel_pmu_enable_all(void)
{
wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL, x86_pmu.intel_ctrl);
barrier();
for (idx = 0; idx < x86_pmu.num_counters; idx++) {
+ struct perf_counter *counter = cpuc->counters[idx];
u64 val;
if (!test_bit(idx, cpuc->active_mask))
continue;
- rdmsrl(MSR_K7_EVNTSEL0 + idx, val);
- if (val & ARCH_PERFMON_EVENTSEL0_ENABLE)
- continue;
+
+ val = counter->hw.config;
val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
wrmsrl(MSR_K7_EVNTSEL0 + idx, val);
}
static inline void x86_pmu_enable_counter(struct hw_perf_counter *hwc, int idx)
{
- int err;
- err = checking_wrmsrl(hwc->config_base + idx,
+ (void)checking_wrmsrl(hwc->config_base + idx,
hwc->config | ARCH_PERFMON_EVENTSEL0_ENABLE);
}
static inline void x86_pmu_disable_counter(struct hw_perf_counter *hwc, int idx)
{
- int err;
- err = checking_wrmsrl(hwc->config_base + idx,
- hwc->config);
+ (void)checking_wrmsrl(hwc->config_base + idx, hwc->config);
}
static inline void
{
int idx = __idx - X86_PMC_IDX_FIXED;
u64 ctrl_val, mask;
- int err;
mask = 0xfULL << (idx * 4);
rdmsrl(hwc->config_base, ctrl_val);
ctrl_val &= ~mask;
- err = checking_wrmsrl(hwc->config_base, ctrl_val);
+ (void)checking_wrmsrl(hwc->config_base, ctrl_val);
+}
+
+static inline void
+p6_pmu_disable_counter(struct hw_perf_counter *hwc, int idx)
+{
+ struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+ u64 val = P6_NOP_COUNTER;
+
+ if (cpuc->enabled)
+ val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+
+ (void)checking_wrmsrl(hwc->config_base + idx, val);
}
static inline void
err = checking_wrmsrl(hwc->config_base, ctrl_val);
}
+static void p6_pmu_enable_counter(struct hw_perf_counter *hwc, int idx)
+{
+ struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+ u64 val;
+
+ val = hwc->config;
+ if (cpuc->enabled)
+ val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+
+ (void)checking_wrmsrl(hwc->config_base + idx, val);
+}
+
+
static void intel_pmu_enable_counter(struct hw_perf_counter *hwc, int idx)
{
if (unlikely(hwc->config_base == MSR_ARCH_PERFMON_FIXED_CTR_CTRL)) {
if (cpuc->enabled)
x86_pmu_enable_counter(hwc, idx);
- else
- x86_pmu_disable_counter(hwc, idx);
}
static int
local_irq_restore(flags);
}
+static int p6_pmu_handle_irq(struct pt_regs *regs)
+{
+ struct perf_sample_data data;
+ struct cpu_hw_counters *cpuc;
+ struct perf_counter *counter;
+ struct hw_perf_counter *hwc;
+ int idx, handled = 0;
+ u64 val;
+
+ data.regs = regs;
+ data.addr = 0;
+
+ cpuc = &__get_cpu_var(cpu_hw_counters);
+
+ for (idx = 0; idx < x86_pmu.num_counters; idx++) {
+ if (!test_bit(idx, cpuc->active_mask))
+ continue;
+
+ counter = cpuc->counters[idx];
+ hwc = &counter->hw;
+
+ val = x86_perf_counter_update(counter, hwc, idx);
+ if (val & (1ULL << (x86_pmu.counter_bits - 1)))
+ continue;
+
+ /*
+ * counter overflow
+ */
+ handled = 1;
+ data.period = counter->hw.last_period;
+
+ if (!x86_perf_counter_set_period(counter, hwc, idx))
+ continue;
+
+ if (perf_counter_overflow(counter, 1, &data))
+ p6_pmu_disable_counter(hwc, idx);
+ }
+
+ if (handled)
+ inc_irq_stat(apic_perf_irqs);
+
+ return handled;
+}
/*
* This handler is triggered by the local APIC, so the APIC IRQ handling
{
struct perf_sample_data data;
struct cpu_hw_counters *cpuc;
- int bit, cpu, loops;
+ int bit, loops;
u64 ack, status;
data.regs = regs;
data.addr = 0;
- cpu = smp_processor_id();
- cpuc = &per_cpu(cpu_hw_counters, cpu);
+ cpuc = &__get_cpu_var(cpu_hw_counters);
perf_disable();
status = intel_pmu_get_status();
struct cpu_hw_counters *cpuc;
struct perf_counter *counter;
struct hw_perf_counter *hwc;
- int cpu, idx, handled = 0;
+ int idx, handled = 0;
u64 val;
data.regs = regs;
data.addr = 0;
- cpu = smp_processor_id();
- cpuc = &per_cpu(cpu_hw_counters, cpu);
+ cpuc = &__get_cpu_var(cpu_hw_counters);
for (idx = 0; idx < x86_pmu.num_counters; idx++) {
if (!test_bit(idx, cpuc->active_mask))
void set_perf_counter_pending(void)
{
+#ifdef CONFIG_X86_LOCAL_APIC
apic->send_IPI_self(LOCAL_PENDING_VECTOR);
+#endif
}
void perf_counters_lapic_init(void)
{
- if (!x86_pmu_initialized())
+#ifdef CONFIG_X86_LOCAL_APIC
+ if (!x86_pmu.apic || !x86_pmu_initialized())
return;
/*
* Always use NMI for PMU
*/
apic_write(APIC_LVTPC, APIC_DM_NMI);
+#endif
}
static int __kprobes
regs = args->regs;
+#ifdef CONFIG_X86_LOCAL_APIC
apic_write(APIC_LVTPC, APIC_DM_NMI);
+#endif
/*
* Can't rely on the handled return value to say it was our NMI, two
* counters could trigger 'simultaneously' raising two back-to-back NMIs.
.priority = 1
};
+static struct x86_pmu p6_pmu = {
+ .name = "p6",
+ .handle_irq = p6_pmu_handle_irq,
+ .disable_all = p6_pmu_disable_all,
+ .enable_all = p6_pmu_enable_all,
+ .enable = p6_pmu_enable_counter,
+ .disable = p6_pmu_disable_counter,
+ .eventsel = MSR_P6_EVNTSEL0,
+ .perfctr = MSR_P6_PERFCTR0,
+ .event_map = p6_pmu_event_map,
+ .raw_event = p6_pmu_raw_event,
+ .max_events = ARRAY_SIZE(p6_perfmon_event_map),
+ .apic = 1,
+ .max_period = (1ULL << 31) - 1,
+ .version = 0,
+ .num_counters = 2,
+ /*
+ * Counters have 40 bits implemented. However they are designed such
+ * that bits [32-39] are sign extensions of bit 31. As such the
+ * effective width of a counter for P6-like PMU is 32 bits only.
+ *
+ * See IA-32 Intel Architecture Software developer manual Vol 3B
+ */
+ .counter_bits = 32,
+ .counter_mask = (1ULL << 32) - 1,
+};
+
static struct x86_pmu intel_pmu = {
.name = "Intel",
.handle_irq = intel_pmu_handle_irq,
.event_map = intel_pmu_event_map,
.raw_event = intel_pmu_raw_event,
.max_events = ARRAY_SIZE(intel_perfmon_event_map),
+ .apic = 1,
/*
* Intel PMCs cannot be accessed sanely above 32 bit width,
* so we install an artificial 1<<31 period regardless of
.num_counters = 4,
.counter_bits = 48,
.counter_mask = (1ULL << 48) - 1,
+ .apic = 1,
/* use highest bit to detect overflow */
.max_period = (1ULL << 47) - 1,
};
+static int p6_pmu_init(void)
+{
+ switch (boot_cpu_data.x86_model) {
+ case 1:
+ case 3: /* Pentium Pro */
+ case 5:
+ case 6: /* Pentium II */
+ case 7:
+ case 8:
+ case 11: /* Pentium III */
+ break;
+ case 9:
+ case 13:
+ /* Pentium M */
+ break;
+ default:
+ pr_cont("unsupported p6 CPU model %d ",
+ boot_cpu_data.x86_model);
+ return -ENODEV;
+ }
+
+ x86_pmu = p6_pmu;
+
+ if (!cpu_has_apic) {
+ pr_info("no APIC, boot with the \"lapic\" boot parameter to force-enable it.\n");
+ pr_info("no hardware sampling interrupt available.\n");
+ x86_pmu.apic = 0;
+ }
+
+ return 0;
+}
+
static int intel_pmu_init(void)
{
union cpuid10_edx edx;
unsigned int ebx;
int version;
- if (!cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON))
+ if (!cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) {
+ /* check for P6 processor family */
+ if (boot_cpu_data.x86 == 6) {
+ return p6_pmu_init();
+ } else {
return -ENODEV;
+ }
+ }
/*
* Check whether the Architectural PerfMon supports
*/
c16 = tmp = early_ioremap(efi.systab->fw_vendor, 2);
if (c16) {
- for (i = 0; i < sizeof(vendor) && *c16; ++i)
+ for (i = 0; i < sizeof(vendor) - 1 && *c16; ++i)
vendor[i] = *c16++;
vendor[i] = '\0';
} else
&& end_pfn <= max_pfn_mapped))
va = __va(md->phys_addr);
else
- va = efi_ioremap(md->phys_addr, size);
+ va = efi_ioremap(md->phys_addr, size, md->type);
md->virt_addr = (u64) (unsigned long) va;
early_runtime_code_mapping_set_exec(0);
}
-void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size)
+void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size,
+ u32 type)
{
unsigned long last_map_pfn;
+ if (type == EFI_MEMORY_MAPPED_IO)
+ return ioremap(phys_addr, size);
+
last_map_pfn = init_memory_mapping(phys_addr, phys_addr + size);
if ((last_map_pfn << PAGE_SHIFT) < phys_addr + size)
return NULL;
* which will be freed later
*/
-#ifndef CONFIG_HOTPLUG_CPU
-.section .init.text,"ax",@progbits
-#endif
+__CPUINIT
#ifdef CONFIG_SMP
ENTRY(startup_32_smp)
#endif
iret
-.section .cpuinit.data,"wa"
+ __REFDATA
.align 4
ENTRY(initial_code)
.long i386_start_kernel
#ifdef CONFIG_X86_THERMAL_VECTOR
alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
#endif
-#ifdef CONFIG_X86_THRESHOLD
+#ifdef CONFIG_X86_MCE_THRESHOLD
alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
#endif
#if defined(CONFIG_X86_NEW_MCE) && defined(CONFIG_X86_LOCAL_APIC)
static struct irqaction mfgptirq = {
.handler = mfgpt_tick,
- .flags = IRQF_DISABLED | IRQF_NOBALANCING,
+ .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_TIMER,
.name = "mfgpt-timer"
};
#include <linux/dmar.h>
#include <linux/bootmem.h>
#include <linux/pci.h>
+#include <linux/kmemleak.h>
#include <asm/proto.h>
#include <asm/dma.h>
/* Set this to 1 if there is a HW IOMMU in the system */
int iommu_detected __read_mostly = 0;
-int iommu_pass_through;
+/*
+ * This variable becomes 1 if iommu=pt is passed on the kernel command line.
+ * If this variable is 1, IOMMU implementations do no DMA ranslation for
+ * devices and allow every device to access to whole physical memory. This is
+ * useful if a user want to use an IOMMU only for KVM device assignment to
+ * guests and not for driver dma translation.
+ */
+int iommu_pass_through __read_mostly;
dma_addr_t bad_dma_address __read_mostly = 0;
EXPORT_SYMBOL(bad_dma_address);
size = roundup(dma32_bootmem_size, align);
dma32_bootmem_ptr = __alloc_bootmem_nopanic(size, align,
512ULL<<20);
+ /*
+ * Kmemleak should not scan this block as it may not be mapped via the
+ * kernel direct mapping.
+ */
+ kmemleak_ignore(dma32_bootmem_ptr);
if (dma32_bootmem_ptr)
dma32_bootmem_size = size;
else
return NULL;
addr = page_to_phys(page);
- if (!is_buffer_dma_capable(dma_mask, addr, size)) {
+ if (addr + size > dma_mask) {
__free_pages(page, get_order(size));
if (dma_mask < DMA_BIT_MASK(32) && !(flag & GFP_DMA)) {
static inline int
need_iommu(struct device *dev, unsigned long addr, size_t size)
{
- return force_iommu ||
- !is_buffer_dma_capable(*dev->dma_mask, addr, size);
+ return force_iommu || !dma_capable(dev, addr, size);
}
static inline int
nonforced_iommu(struct device *dev, unsigned long addr, size_t size)
{
- return !is_buffer_dma_capable(*dev->dma_mask, addr, size);
+ return !dma_capable(dev, addr, size);
}
/* Map a single continuous physical area into the IOMMU.
static int
check_addr(char *name, struct device *hwdev, dma_addr_t bus, size_t size)
{
- if (hwdev && !is_buffer_dma_capable(*hwdev->dma_mask, bus, size)) {
+ if (hwdev && !dma_capable(hwdev, bus, size)) {
if (*hwdev->dma_mask >= DMA_BIT_MASK(32))
printk(KERN_ERR
"nommu_%s: overflow %Lx+%zu of device mask %Lx\n",
free_pages((unsigned long)vaddr, get_order(size));
}
+static void nommu_sync_single_for_device(struct device *dev,
+ dma_addr_t addr, size_t size,
+ enum dma_data_direction dir)
+{
+ flush_write_buffers();
+}
+
+
+static void nommu_sync_sg_for_device(struct device *dev,
+ struct scatterlist *sg, int nelems,
+ enum dma_data_direction dir)
+{
+ flush_write_buffers();
+}
+
struct dma_map_ops nommu_dma_ops = {
- .alloc_coherent = dma_generic_alloc_coherent,
- .free_coherent = nommu_free_coherent,
- .map_sg = nommu_map_sg,
- .map_page = nommu_map_page,
- .is_phys = 1,
+ .alloc_coherent = dma_generic_alloc_coherent,
+ .free_coherent = nommu_free_coherent,
+ .map_sg = nommu_map_sg,
+ .map_page = nommu_map_page,
+ .sync_single_for_device = nommu_sync_single_for_device,
+ .sync_sg_for_device = nommu_sync_sg_for_device,
+ .is_phys = 1,
};
void __init no_iommu_init(void)
int swiotlb __read_mostly;
-void * __init swiotlb_alloc_boot(size_t size, unsigned long nslabs)
-{
- return alloc_bootmem_low_pages(size);
-}
-
-void *swiotlb_alloc(unsigned order, unsigned long nslabs)
-{
- return (void *)__get_free_pages(GFP_DMA | __GFP_NOWARN, order);
-}
-
-dma_addr_t swiotlb_phys_to_bus(struct device *hwdev, phys_addr_t paddr)
-{
- return paddr;
-}
-
-phys_addr_t swiotlb_bus_to_phys(struct device *hwdev, dma_addr_t baddr)
-{
- return baddr;
-}
-
-int __weak swiotlb_arch_range_needs_mapping(phys_addr_t paddr, size_t size)
-{
- return 0;
-}
-
static void *x86_swiotlb_alloc_coherent(struct device *hwdev, size_t size,
dma_addr_t *dma_handle, gfp_t flags)
{
if (!cpumask_test_cpu(cpu, c1e_mask)) {
cpumask_set_cpu(cpu, c1e_mask);
/*
- * Force broadcast so ACPI can not interfere. Needs
- * to run with interrupts enabled as it uses
- * smp_function_call.
+ * Force broadcast so ACPI can not interfere.
*/
- local_irq_enable();
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_FORCE,
&cpu);
printk(KERN_INFO "Switch to broadcast mode on CPU%d\n",
cpu);
- local_irq_disable();
}
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu);
"adc %5,%%edx ; "
: "=A" (product), "=r" (tmp1), "=r" (tmp2)
: "a" ((u32)delta), "1" ((u32)(delta >> 32)), "2" (mul_frac) );
-#elif __x86_64__
+#elif defined(__x86_64__)
__asm__ (
"mul %%rdx ; shrd $32,%%rdx,%%rax"
: "=a" (product) : "0" (delta), "d" ((u64)mul_frac) );
#include <linux/init.h>
#include <linux/pm.h>
#include <linux/efi.h>
+#include <linux/dmi.h>
#include <acpi/reboot.h>
#include <asm/io.h>
#include <asm/apic.h>
#include <asm/cpu.h>
#ifdef CONFIG_X86_32
-# include <linux/dmi.h>
# include <linux/ctype.h>
# include <linux/mc146818rtc.h>
#else
DMI_MATCH(DMI_PRODUCT_NAME, "VGN-Z540N"),
},
},
+ { /* Handle problems with rebooting on CompuLab SBC-FITPC2 */
+ .callback = set_bios_reboot,
+ .ident = "CompuLab SBC-FITPC2",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "CompuLab"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "SBC-FITPC2"),
+ },
+ },
{ }
};
#endif /* CONFIG_X86_32 */
+/*
+ * Some Apple MacBook and MacBookPro's needs reboot=p to be able to reboot
+ */
+static int __init set_pci_reboot(const struct dmi_system_id *d)
+{
+ if (reboot_type != BOOT_CF9) {
+ reboot_type = BOOT_CF9;
+ printk(KERN_INFO "%s series board detected. "
+ "Selecting PCI-method for reboots.\n", d->ident);
+ }
+ return 0;
+}
+
+static struct dmi_system_id __initdata pci_reboot_dmi_table[] = {
+ { /* Handle problems with rebooting on Apple MacBook5 */
+ .callback = set_pci_reboot,
+ .ident = "Apple MacBook5",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBook5"),
+ },
+ },
+ { /* Handle problems with rebooting on Apple MacBookPro5 */
+ .callback = set_pci_reboot,
+ .ident = "Apple MacBookPro5",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5"),
+ },
+ },
+ { }
+};
+
+static int __init pci_reboot_init(void)
+{
+ dmi_check_system(pci_reboot_dmi_table);
+ return 0;
+}
+core_initcall(pci_reboot_init);
+
static inline void kb_wait(void)
{
int i;
DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies"),
},
},
+ {
+ /*
+ * AMI BIOS with low memory corruption was found on Intel DG45ID board.
+ * It hase different DMI_BIOS_VENDOR = "Intel Corp.", for now we will
+ * match only DMI_BOARD_NAME and see if there is more bad products
+ * with this vendor.
+ */
+ .callback = dmi_low_memory_corruption,
+ .ident = "AMI BIOS",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "DG45ID"),
+ },
+ },
#endif
{}
};
if (!chosen) {
size_t vm_size = VMALLOC_END - VMALLOC_START;
- size_t tot_size = num_possible_cpus() * PMD_SIZE;
+ size_t tot_size = nr_cpu_ids * PMD_SIZE;
/* on non-NUMA, embedding is better */
if (!pcpu_need_numa())
dyn_size = pcpul_size - static_size - PERCPU_FIRST_CHUNK_RESERVE;
/* allocate pointer array and alloc large pages */
- map_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpul_map[0]));
+ map_size = PFN_ALIGN(nr_cpu_ids * sizeof(pcpul_map[0]));
pcpul_map = alloc_bootmem(map_size);
for_each_possible_cpu(cpu) {
/* allocate address and map */
pcpul_vm.flags = VM_ALLOC;
- pcpul_vm.size = num_possible_cpus() * PMD_SIZE;
+ pcpul_vm.size = nr_cpu_ids * PMD_SIZE;
vm_area_register_early(&pcpul_vm, PMD_SIZE);
for_each_possible_cpu(cpu) {
PMD_SIZE, pcpul_vm.addr, NULL);
/* sort pcpul_map array for pcpu_lpage_remapped() */
- for (i = 0; i < num_possible_cpus() - 1; i++)
- for (j = i + 1; j < num_possible_cpus(); j++)
+ for (i = 0; i < nr_cpu_ids - 1; i++)
+ for (j = i + 1; j < nr_cpu_ids; j++)
if (pcpul_map[i].ptr > pcpul_map[j].ptr) {
struct pcpul_ent tmp = pcpul_map[i];
pcpul_map[i] = pcpul_map[j];
{
void *pmd_addr = (void *)((unsigned long)kaddr & PMD_MASK);
unsigned long offset = (unsigned long)kaddr & ~PMD_MASK;
- int left = 0, right = num_possible_cpus() - 1;
+ int left = 0, right = nr_cpu_ids - 1;
int pos;
/* pcpul in use at all? */
pcpu4k_nr_static_pages = PFN_UP(static_size);
/* unaligned allocations can't be freed, round up to page size */
- pages_size = PFN_ALIGN(pcpu4k_nr_static_pages * num_possible_cpus()
+ pages_size = PFN_ALIGN(pcpu4k_nr_static_pages * nr_cpu_ids
* sizeof(pcpu4k_pages[0]));
pcpu4k_pages = alloc_bootmem(pages_size);
if (thread_info_flags & _TIF_NOTIFY_RESUME) {
clear_thread_flag(TIF_NOTIFY_RESUME);
tracehook_notify_resume(regs);
+ if (current->replacement_session_keyring)
+ key_replace_session_keyring();
}
#ifdef CONFIG_X86_32
* note that base_dest_nodeid is actually a nasid.
*/
ad2->header.base_dest_nodeid = uv_partition_base_pnode << 1;
+ ad2->header.dest_subnodeid = 0x10; /* the LB */
ad2->header.command = UV_NET_ENDPOINT_INTD;
ad2->header.int_both = 1;
/*
* use the TSC value at the transitions to calculate a pretty
* good value for the TSC frequencty.
*/
+static inline int pit_verify_msb(unsigned char val)
+{
+ /* Ignore LSB */
+ inb(0x42);
+ return inb(0x42) == val;
+}
+
static inline int pit_expect_msb(unsigned char val, u64 *tscp, unsigned long *deltap)
{
int count;
u64 tsc = 0;
for (count = 0; count < 50000; count++) {
- /* Ignore LSB */
- inb(0x42);
- if (inb(0x42) != val)
+ if (!pit_verify_msb(val))
break;
tsc = get_cycles();
}
* to do that is to just read back the 16-bit counter
* once from the PIT.
*/
- inb(0x42);
- inb(0x42);
+ pit_verify_msb(0);
if (pit_expect_msb(0xff, &tsc, &d1)) {
for (i = 1; i <= MAX_QUICK_PIT_ITERATIONS; i++) {
* Iterate until the error is less than 500 ppm
*/
delta -= tsc;
- if (d1+d2 < delta >> 11)
- goto success;
+ if (d1+d2 >= delta >> 11)
+ continue;
+
+ /*
+ * Check the PIT one more time to verify that
+ * all TSC reads were stable wrt the PIT.
+ *
+ * This also guarantees serialization of the
+ * last cycle read ('d2') in pit_expect_msb.
+ */
+ if (!pit_verify_msb(0xfe - i))
+ break;
+ goto success;
}
}
printk("Fast TSC calibration failed\n");
ap.ds = __USER_DS;
ap.es = __USER_DS;
ap.fs = __KERNEL_PERCPU;
- ap.gs = 0;
+ ap.gs = __KERNEL_STACK_CANARY;
ap.eflags = 0;
data PT_LOAD FLAGS(7); /* RWE */
#ifdef CONFIG_X86_64
user PT_LOAD FLAGS(7); /* RWE */
- data.init PT_LOAD FLAGS(7); /* RWE */
#ifdef CONFIG_SMP
percpu PT_LOAD FLAGS(7); /* RWE */
#endif
- data.init2 PT_LOAD FLAGS(7); /* RWE */
+ init PT_LOAD FLAGS(7); /* RWE */
#endif
note PT_NOTE FLAGS(0); /* ___ */
}
__stop___ex_table = .;
} :text = 0x9090
- RODATA
+ RO_DATA(PAGE_SIZE)
/* Data */
- . = ALIGN(PAGE_SIZE);
.data : AT(ADDR(.data) - LOAD_OFFSET) {
/* Start of data section */
_sdata = .;
- DATA_DATA
- CONSTRUCTORS
-#ifdef CONFIG_X86_64
- /* End of data section */
- _edata = .;
-#endif
- } :data
+ /* init_task */
+ INIT_TASK_DATA(THREAD_SIZE)
#ifdef CONFIG_X86_32
- /* 32 bit has nosave before _edata */
- . = ALIGN(PAGE_SIZE);
- .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
- __nosave_begin = .;
- *(.data.nosave)
- . = ALIGN(PAGE_SIZE);
- __nosave_end = .;
- }
+ /* 32 bit has nosave before _edata */
+ NOSAVE_DATA
#endif
- . = ALIGN(PAGE_SIZE);
- .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
- *(.data.page_aligned)
+ PAGE_ALIGNED_DATA(PAGE_SIZE)
*(.data.idt)
- }
-#ifdef CONFIG_X86_32
- . = ALIGN(32);
-#else
- . = ALIGN(PAGE_SIZE);
- . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
-#endif
- .data.cacheline_aligned :
- AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
- *(.data.cacheline_aligned)
- }
+ CACHELINE_ALIGNED_DATA(CONFIG_X86_L1_CACHE_BYTES)
- /* rarely changed data like cpu maps */
-#ifdef CONFIG_X86_32
- . = ALIGN(32);
-#else
- . = ALIGN(CONFIG_X86_INTERNODE_CACHE_BYTES);
-#endif
- .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
- *(.data.read_mostly)
+ DATA_DATA
+ CONSTRUCTORS
+
+ /* rarely changed data like cpu maps */
+ READ_MOSTLY_DATA(CONFIG_X86_INTERNODE_CACHE_BYTES)
-#ifdef CONFIG_X86_32
/* End of data section */
_edata = .;
-#endif
- }
+ } :data
#ifdef CONFIG_X86_64
#define VSYSCALL_ADDR (-10*1024*1024)
-#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data.read_mostly) + \
- SIZEOF(.data.read_mostly) + 4095) & ~(4095))
-#define VSYSCALL_VIRT_ADDR ((ADDR(.data.read_mostly) + \
- SIZEOF(.data.read_mostly) + 4095) & ~(4095))
+#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data) + SIZEOF(.data) + \
+ PAGE_SIZE - 1) & ~(PAGE_SIZE - 1))
+#define VSYSCALL_VIRT_ADDR ((ADDR(.data) + SIZEOF(.data) + \
+ PAGE_SIZE - 1) & ~(PAGE_SIZE - 1))
#define VLOAD_OFFSET (VSYSCALL_ADDR - VSYSCALL_PHYS_ADDR)
#define VLOAD(x) (ADDR(x) - VLOAD_OFFSET)
#endif /* CONFIG_X86_64 */
- /* init_task */
- . = ALIGN(THREAD_SIZE);
- .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
- *(.data.init_task)
+ /* Init code and data - will be freed after init */
+ . = ALIGN(PAGE_SIZE);
+ .init.begin : AT(ADDR(.init.begin) - LOAD_OFFSET) {
+ __init_begin = .; /* paired with __init_end */
}
-#ifdef CONFIG_X86_64
- :data.init
-#endif
+#if defined(CONFIG_X86_64) && defined(CONFIG_SMP)
/*
- * smp_locks might be freed after init
- * start/end must be page aligned
+ * percpu offsets are zero-based on SMP. PERCPU_VADDR() changes the
+ * output PHDR, so the next output section - .init.text - should
+ * start another segment - init.
*/
- . = ALIGN(PAGE_SIZE);
- .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
- __smp_locks = .;
- *(.smp_locks)
- __smp_locks_end = .;
- . = ALIGN(PAGE_SIZE);
- }
+ PERCPU_VADDR(0, :percpu)
+#endif
- /* Init code and data - will be freed after init */
- . = ALIGN(PAGE_SIZE);
.init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
- __init_begin = .; /* paired with __init_end */
_sinittext = .;
INIT_TEXT
_einittext = .;
}
+#ifdef CONFIG_X86_64
+ :init
+#endif
.init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
INIT_DATA
}
#endif
-#if defined(CONFIG_X86_64) && defined(CONFIG_SMP)
- /*
- * percpu offsets are zero-based on SMP. PERCPU_VADDR() changes the
- * output PHDR, so the next output section - __data_nosave - should
- * start another section data.init2. Also, pda should be at the head of
- * percpu area. Preallocate it and define the percpu offset symbol
- * so that it can be accessed as a percpu variable.
- */
- . = ALIGN(PAGE_SIZE);
- PERCPU_VADDR(0, :percpu)
-#else
+#if !defined(CONFIG_X86_64) || !defined(CONFIG_SMP)
PERCPU(PAGE_SIZE)
#endif
__init_end = .;
}
+ /*
+ * smp_locks might be freed after init
+ * start/end must be page aligned
+ */
+ . = ALIGN(PAGE_SIZE);
+ .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
+ __smp_locks = .;
+ *(.smp_locks)
+ __smp_locks_end = .;
+ . = ALIGN(PAGE_SIZE);
+ }
+
#ifdef CONFIG_X86_64
.data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
- . = ALIGN(PAGE_SIZE);
- __nosave_begin = .;
- *(.data.nosave)
- . = ALIGN(PAGE_SIZE);
- __nosave_end = .;
- } :data.init2
- /* use another section data.init2, see PERCPU_VADDR() above */
+ NOSAVE_DATA
+ }
#endif
/* BSS */
#ifdef CONFIG_X86_32
-ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE),
- "kernel image bigger than KERNEL_IMAGE_SIZE")
+. = ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE),
+ "kernel image bigger than KERNEL_IMAGE_SIZE");
#else
/*
* Per-cpu symbols which need to be offset from __per_cpu_load
/*
* Build-time check on the image size:
*/
-ASSERT((_end - _text <= KERNEL_IMAGE_SIZE),
- "kernel image bigger than KERNEL_IMAGE_SIZE")
+. = ASSERT((_end - _text <= KERNEL_IMAGE_SIZE),
+ "kernel image bigger than KERNEL_IMAGE_SIZE");
#ifdef CONFIG_SMP
-ASSERT((per_cpu__irq_stack_union == 0),
- "irq_stack_union is not at start of per-cpu area");
+. = ASSERT((per_cpu__irq_stack_union == 0),
+ "irq_stack_union is not at start of per-cpu area");
#endif
#endif /* CONFIG_X86_32 */
#ifdef CONFIG_KEXEC
#include <asm/kexec.h>
-ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE,
- "kexec control code size is too big")
+. = ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE,
+ "kexec control code size is too big");
#endif
ktime_t remaining;
struct kvm_kpit_state *ps = &kvm->arch.vpit->pit_state;
+ if (!ps->pit_timer.period)
+ return 0;
+
/*
* The Counter does not stop when it reaches zero. In
* Modes 0, 1, 4, and 5 the Counter ``wraps around'' to
*
* If rmapp bit zero is one, (then rmap & ~1) points to a struct kvm_rmap_desc
* containing more mappings.
+ *
+ * Returns the number of rmap entries before the spte was added or zero if
+ * the spte was not added.
+ *
*/
-static void rmap_add(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn, int lpage)
+static int rmap_add(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn, int lpage)
{
struct kvm_mmu_page *sp;
struct kvm_rmap_desc *desc;
unsigned long *rmapp;
- int i;
+ int i, count = 0;
if (!is_rmap_pte(*spte))
- return;
+ return count;
gfn = unalias_gfn(vcpu->kvm, gfn);
sp = page_header(__pa(spte));
sp->gfns[spte - sp->spt] = gfn;
} else {
rmap_printk("rmap_add: %p %llx many->many\n", spte, *spte);
desc = (struct kvm_rmap_desc *)(*rmapp & ~1ul);
- while (desc->shadow_ptes[RMAP_EXT-1] && desc->more)
+ while (desc->shadow_ptes[RMAP_EXT-1] && desc->more) {
desc = desc->more;
+ count += RMAP_EXT;
+ }
if (desc->shadow_ptes[RMAP_EXT-1]) {
desc->more = mmu_alloc_rmap_desc(vcpu);
desc = desc->more;
;
desc->shadow_ptes[i] = spte;
}
+ return count;
}
static void rmap_desc_remove_entry(unsigned long *rmapp,
return young;
}
+#define RMAP_RECYCLE_THRESHOLD 1000
+
+static void rmap_recycle(struct kvm_vcpu *vcpu, gfn_t gfn, int lpage)
+{
+ unsigned long *rmapp;
+
+ gfn = unalias_gfn(vcpu->kvm, gfn);
+ rmapp = gfn_to_rmap(vcpu->kvm, gfn, lpage);
+
+ kvm_unmap_rmapp(vcpu->kvm, rmapp);
+ kvm_flush_remote_tlbs(vcpu->kvm);
+}
+
int kvm_age_hva(struct kvm *kvm, unsigned long hva)
{
return kvm_handle_hva(kvm, hva, kvm_age_rmapp);
*/
void kvm_mmu_change_mmu_pages(struct kvm *kvm, unsigned int kvm_nr_mmu_pages)
{
+ int used_pages;
+
+ used_pages = kvm->arch.n_alloc_mmu_pages - kvm->arch.n_free_mmu_pages;
+ used_pages = max(0, used_pages);
+
/*
* If we set the number of mmu pages to be smaller be than the
* number of actived pages , we must to free some mmu pages before we
* change the value
*/
- if ((kvm->arch.n_alloc_mmu_pages - kvm->arch.n_free_mmu_pages) >
- kvm_nr_mmu_pages) {
- int n_used_mmu_pages = kvm->arch.n_alloc_mmu_pages
- - kvm->arch.n_free_mmu_pages;
-
- while (n_used_mmu_pages > kvm_nr_mmu_pages) {
+ if (used_pages > kvm_nr_mmu_pages) {
+ while (used_pages > kvm_nr_mmu_pages) {
struct kvm_mmu_page *page;
page = container_of(kvm->arch.active_mmu_pages.prev,
struct kvm_mmu_page, link);
kvm_mmu_zap_page(kvm, page);
- n_used_mmu_pages--;
+ used_pages--;
}
kvm->arch.n_free_mmu_pages = 0;
}
{
int was_rmapped = 0;
int was_writeble = is_writeble_pte(*shadow_pte);
+ int rmap_count;
pgprintk("%s: spte %llx access %x write_fault %d"
" user_fault %d gfn %lx\n",
page_header_update_slot(vcpu->kvm, shadow_pte, gfn);
if (!was_rmapped) {
- rmap_add(vcpu, shadow_pte, gfn, largepage);
+ rmap_count = rmap_add(vcpu, shadow_pte, gfn, largepage);
if (!is_rmap_pte(*shadow_pte))
kvm_release_pfn_clean(pfn);
+ if (rmap_count > RMAP_RECYCLE_THRESHOLD)
+ rmap_recycle(vcpu, gfn, largepage);
} else {
if (was_writeble)
kvm_release_pfn_dirty(pfn);
svm->vmcb->control.tsc_offset += delta;
vcpu->cpu = cpu;
kvm_migrate_timers(vcpu);
+ svm->asid_generation = 0;
}
for (i = 0; i < NR_HOST_SAVE_USER_MSRS; i++)
svm->vmcb->control.tlb_ctl = TLB_CONTROL_FLUSH_ALL_ASID;
}
- svm->vcpu.cpu = svm_data->cpu;
svm->asid_generation = svm_data->asid_generation;
svm->vmcb->control.asid = svm_data->next_asid++;
}
struct svm_cpu_data *svm_data = per_cpu(svm_data, cpu);
svm->vmcb->control.tlb_ctl = TLB_CONTROL_DO_NOTHING;
- if (svm->vcpu.cpu != cpu ||
- svm->asid_generation != svm_data->asid_generation)
+ /* FIXME: handle wraparound of asid_generation */
+ if (svm->asid_generation != svm_data->asid_generation)
new_asid(svm, svm_data);
}
struct vcpu_vmx *vmx = to_vmx(vcpu);
enum emulation_result err = EMULATE_DONE;
- preempt_enable();
local_irq_enable();
+ preempt_enable();
while (!guest_state_valid(vcpu)) {
err = emulate_instruction(vcpu, kvm_run, 0, 0, 0);
if (err != EMULATE_DONE) {
kvm_report_emulation_failure(vcpu, "emulation failure");
- return;
+ break;
}
if (signal_pending(current))
schedule();
}
- local_irq_disable();
preempt_disable();
+ local_irq_disable();
vmx->invalid_state_emulation_result = err;
}
return false;
}
+static bool valid_pat_type(unsigned t)
+{
+ return t < 8 && (1 << t) & 0xf3; /* 0, 1, 4, 5, 6, 7 */
+}
+
+static bool valid_mtrr_type(unsigned t)
+{
+ return t < 8 && (1 << t) & 0x73; /* 0, 1, 4, 5, 6 */
+}
+
+static bool mtrr_valid(struct kvm_vcpu *vcpu, u32 msr, u64 data)
+{
+ int i;
+
+ if (!msr_mtrr_valid(msr))
+ return false;
+
+ if (msr == MSR_IA32_CR_PAT) {
+ for (i = 0; i < 8; i++)
+ if (!valid_pat_type((data >> (i * 8)) & 0xff))
+ return false;
+ return true;
+ } else if (msr == MSR_MTRRdefType) {
+ if (data & ~0xcff)
+ return false;
+ return valid_mtrr_type(data & 0xff);
+ } else if (msr >= MSR_MTRRfix64K_00000 && msr <= MSR_MTRRfix4K_F8000) {
+ for (i = 0; i < 8 ; i++)
+ if (!valid_mtrr_type((data >> (i * 8)) & 0xff))
+ return false;
+ return true;
+ }
+
+ /* variable MTRRs */
+ return valid_mtrr_type(data & 0xff);
+}
+
static int set_msr_mtrr(struct kvm_vcpu *vcpu, u32 msr, u64 data)
{
u64 *p = (u64 *)&vcpu->arch.mtrr_state.fixed_ranges;
- if (!msr_mtrr_valid(msr))
+ if (!mtrr_valid(vcpu, msr, data))
return 1;
if (msr == MSR_MTRRdefType) {
if (copy_to_user(user_msr_list, &msr_list, sizeof msr_list))
goto out;
r = -E2BIG;
- if (n < num_msrs_to_save)
+ if (n < msr_list.nmsrs)
goto out;
r = -EFAULT;
if (copy_to_user(user_msr_list->indices, &msrs_to_save,
num_msrs_to_save * sizeof(u32)))
goto out;
- if (copy_to_user(user_msr_list->indices
- + num_msrs_to_save * sizeof(u32),
+ if (copy_to_user(user_msr_list->indices + num_msrs_to_save,
&emulated_msrs,
ARRAY_SIZE(emulated_msrs) * sizeof(u32)))
goto out;
*
* So how does the kernel know it's a Guest? We'll see that later, but let's
* just say that we end up here where we replace the native functions various
- * "paravirt" structures with our Guest versions, then boot like normal. :*/
+ * "paravirt" structures with our Guest versions, then boot like normal.
+:*/
/*
* Copyright (C) 2006, Rusty Russell <rusty@rustcorp.com.au> IBM Corporation.
*
* The Guest in our tale is a simple creature: identical to the Host but
* behaving in simplified but equivalent ways. In particular, the Guest is the
- * same kernel as the Host (or at least, built from the same source code). :*/
+ * same kernel as the Host (or at least, built from the same source code).
+:*/
struct lguest_data lguest_data = {
.hcall_status = { [0 ... LHCALL_RING_SIZE-1] = 0xFF },
.syscall_vec = SYSCALL_VECTOR,
};
-/*G:037 async_hcall() is pretty simple: I'm quite proud of it really. We have a
+/*G:037
+ * async_hcall() is pretty simple: I'm quite proud of it really. We have a
* ring buffer of stored hypercalls which the Host will run though next time we
* do a normal hypercall. Each entry in the ring has 5 slots for the hypercall
* arguments, and a "hcall_status" word which is 0 if the call is ready to go,
* If we come around to a slot which hasn't been finished, then the table is
* full and we just make the hypercall directly. This has the nice side
* effect of causing the Host to run all the stored calls in the ring buffer
- * which empties it for next time! */
+ * which empties it for next time!
+ */
static void async_hcall(unsigned long call, unsigned long arg1,
unsigned long arg2, unsigned long arg3,
unsigned long arg4)
static unsigned int next_call;
unsigned long flags;
- /* Disable interrupts if not already disabled: we don't want an
+ /*
+ * Disable interrupts if not already disabled: we don't want an
* interrupt handler making a hypercall while we're already doing
- * one! */
+ * one!
+ */
local_irq_save(flags);
if (lguest_data.hcall_status[next_call] != 0xFF) {
/* Table full, so do normal hcall which will flush table. */
local_irq_restore(flags);
}
-/*G:035 Notice the lazy_hcall() above, rather than hcall(). This is our first
- * real optimization trick!
+/*G:035
+ * Notice the lazy_hcall() above, rather than hcall(). This is our first real
+ * optimization trick!
*
* When lazy_mode is set, it means we're allowed to defer all hypercalls and do
* them as a batch when lazy_mode is eventually turned off. Because hypercalls
* lguest_leave_lazy_mode().
*
* So, when we're in lazy mode, we call async_hcall() to store the call for
- * future processing: */
+ * future processing:
+ */
static void lazy_hcall1(unsigned long call,
unsigned long arg1)
{
async_hcall(call, arg1, 0, 0, 0);
}
+/* You can imagine what lazy_hcall2, 3 and 4 look like. :*/
static void lazy_hcall2(unsigned long call,
unsigned long arg1,
unsigned long arg2)
}
#endif
-/* When lazy mode is turned off reset the per-cpu lazy mode variable and then
- * issue the do-nothing hypercall to flush any stored calls. */
+/*G:036
+ * When lazy mode is turned off reset the per-cpu lazy mode variable and then
+ * issue the do-nothing hypercall to flush any stored calls.
+:*/
static void lguest_leave_lazy_mmu_mode(void)
{
kvm_hypercall0(LHCALL_FLUSH_ASYNC);
* check there before it tries to deliver an interrupt.
*/
-/* save_flags() is expected to return the processor state (ie. "flags"). The
+/*
+ * save_flags() is expected to return the processor state (ie. "flags"). The
* flags word contains all kind of stuff, but in practice Linux only cares
- * about the interrupt flag. Our "save_flags()" just returns that. */
+ * about the interrupt flag. Our "save_flags()" just returns that.
+ */
static unsigned long save_fl(void)
{
return lguest_data.irq_enabled;
lguest_data.irq_enabled = 0;
}
-/* Let's pause a moment. Remember how I said these are called so often?
+/*
+ * Let's pause a moment. Remember how I said these are called so often?
* Jeremy Fitzhardinge optimized them so hard early in 2009 that he had to
* break some rules. In particular, these functions are assumed to save their
* own registers if they need to: normal C functions assume they can trash the
* eax register. To use normal C functions, we use
* PV_CALLEE_SAVE_REGS_THUNK(), which pushes %eax onto the stack, calls the
- * C function, then restores it. */
+ * C function, then restores it.
+ */
PV_CALLEE_SAVE_REGS_THUNK(save_fl);
PV_CALLEE_SAVE_REGS_THUNK(irq_disable);
/*:*/
extern void lg_irq_enable(void);
extern void lg_restore_fl(unsigned long flags);
-/*M:003 Note that we don't check for outstanding interrupts when we re-enable
- * them (or when we unmask an interrupt). This seems to work for the moment,
- * since interrupts are rare and we'll just get the interrupt on the next timer
- * tick, but now we can run with CONFIG_NO_HZ, we should revisit this. One way
- * would be to put the "irq_enabled" field in a page by itself, and have the
- * Host write-protect it when an interrupt comes in when irqs are disabled.
- * There will then be a page fault as soon as interrupts are re-enabled.
+/*M:003
+ * We could be more efficient in our checking of outstanding interrupts, rather
+ * than using a branch. One way would be to put the "irq_enabled" field in a
+ * page by itself, and have the Host write-protect it when an interrupt comes
+ * in when irqs are disabled. There will then be a page fault as soon as
+ * interrupts are re-enabled.
*
* A better method is to implement soft interrupt disable generally for x86:
* instead of disabling interrupts, we set a flag. If an interrupt does come
* in, we then disable them for real. This is uncommon, so we could simply use
- * a hypercall for interrupt control and not worry about efficiency. :*/
+ * a hypercall for interrupt control and not worry about efficiency.
+:*/
/*G:034
* The Interrupt Descriptor Table (IDT).
static void lguest_write_idt_entry(gate_desc *dt,
int entrynum, const gate_desc *g)
{
- /* The gate_desc structure is 8 bytes long: we hand it to the Host in
+ /*
+ * The gate_desc structure is 8 bytes long: we hand it to the Host in
* two 32-bit chunks. The whole 32-bit kernel used to hand descriptors
* around like this; typesafety wasn't a big concern in Linux's early
- * years. */
+ * years.
+ */
u32 *desc = (u32 *)g;
/* Keep the local copy up to date. */
native_write_idt_entry(dt, entrynum, g);
kvm_hypercall3(LHCALL_LOAD_IDT_ENTRY, entrynum, desc[0], desc[1]);
}
-/* Changing to a different IDT is very rare: we keep the IDT up-to-date every
+/*
+ * Changing to a different IDT is very rare: we keep the IDT up-to-date every
* time it is written, so we can simply loop through all entries and tell the
- * Host about them. */
+ * Host about them.
+ */
static void lguest_load_idt(const struct desc_ptr *desc)
{
unsigned int i;
kvm_hypercall3(LHCALL_LOAD_GDT_ENTRY, i, gdt[i].a, gdt[i].b);
}
-/* For a single GDT entry which changes, we do the lazy thing: alter our GDT,
+/*
+ * For a single GDT entry which changes, we do the lazy thing: alter our GDT,
* then tell the Host to reload the entire thing. This operation is so rare
- * that this naive implementation is reasonable. */
+ * that this naive implementation is reasonable.
+ */
static void lguest_write_gdt_entry(struct desc_struct *dt, int entrynum,
const void *desc, int type)
{
dt[entrynum].a, dt[entrynum].b);
}
-/* OK, I lied. There are three "thread local storage" GDT entries which change
+/*
+ * OK, I lied. There are three "thread local storage" GDT entries which change
* on every context switch (these three entries are how glibc implements
- * __thread variables). So we have a hypercall specifically for this case. */
+ * __thread variables). So we have a hypercall specifically for this case.
+ */
static void lguest_load_tls(struct thread_struct *t, unsigned int cpu)
{
- /* There's one problem which normal hardware doesn't have: the Host
+ /*
+ * There's one problem which normal hardware doesn't have: the Host
* can't handle us removing entries we're currently using. So we clear
- * the GS register here: if it's needed it'll be reloaded anyway. */
+ * the GS register here: if it's needed it'll be reloaded anyway.
+ */
lazy_load_gs(0);
lazy_hcall2(LHCALL_LOAD_TLS, __pa(&t->tls_array), cpu);
}
-/*G:038 That's enough excitement for now, back to ploughing through each of
- * the different pv_ops structures (we're about 1/3 of the way through).
+/*G:038
+ * That's enough excitement for now, back to ploughing through each of the
+ * different pv_ops structures (we're about 1/3 of the way through).
*
* This is the Local Descriptor Table, another weird Intel thingy. Linux only
* uses this for some strange applications like Wine. We don't do anything
- * here, so they'll get an informative and friendly Segmentation Fault. */
+ * here, so they'll get an informative and friendly Segmentation Fault.
+ */
static void lguest_set_ldt(const void *addr, unsigned entries)
{
}
-/* This loads a GDT entry into the "Task Register": that entry points to a
+/*
+ * This loads a GDT entry into the "Task Register": that entry points to a
* structure called the Task State Segment. Some comments scattered though the
* kernel code indicate that this used for task switching in ages past, along
* with blood sacrifice and astrology.
* Now there's nothing interesting in here that we don't get told elsewhere.
* But the native version uses the "ltr" instruction, which makes the Host
* complain to the Guest about a Segmentation Fault and it'll oops. So we
- * override the native version with a do-nothing version. */
+ * override the native version with a do-nothing version.
+ */
static void lguest_load_tr_desc(void)
{
}
-/* The "cpuid" instruction is a way of querying both the CPU identity
+/*
+ * The "cpuid" instruction is a way of querying both the CPU identity
* (manufacturer, model, etc) and its features. It was introduced before the
* Pentium in 1993 and keeps getting extended by both Intel, AMD and others.
* As you might imagine, after a decade and a half this treatment, it is now a
* giant ball of hair. Its entry in the current Intel manual runs to 28 pages.
*
* This instruction even it has its own Wikipedia entry. The Wikipedia entry
- * has been translated into 4 languages. I am not making this up!
+ * has been translated into 5 languages. I am not making this up!
*
* We could get funky here and identify ourselves as "GenuineLguest", but
* instead we just use the real "cpuid" instruction. Then I pretty much turned
* Replacing the cpuid so we can turn features off is great for the kernel, but
* anyone (including userspace) can just use the raw "cpuid" instruction and
* the Host won't even notice since it isn't privileged. So we try not to get
- * too worked up about it. */
+ * too worked up about it.
+ */
static void lguest_cpuid(unsigned int *ax, unsigned int *bx,
unsigned int *cx, unsigned int *dx)
{
native_cpuid(ax, bx, cx, dx);
switch (function) {
- case 1: /* Basic feature request. */
- /* We only allow kernel to see SSE3, CMPXCHG16B and SSSE3 */
+ /*
+ * CPUID 0 gives the highest legal CPUID number (and the ID string).
+ * We futureproof our code a little by sticking to known CPUID values.
+ */
+ case 0:
+ if (*ax > 5)
+ *ax = 5;
+ break;
+
+ /*
+ * CPUID 1 is a basic feature request.
+ *
+ * CX: we only allow kernel to see SSE3, CMPXCHG16B and SSSE3
+ * DX: SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, TSC, FPU and PAE.
+ */
+ case 1:
*cx &= 0x00002201;
- /* SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, TSC, FPU, PAE. */
*dx &= 0x07808151;
- /* The Host can do a nice optimization if it knows that the
+ /*
+ * The Host can do a nice optimization if it knows that the
* kernel mappings (addresses above 0xC0000000 or whatever
* PAGE_OFFSET is set to) haven't changed. But Linux calls
* flush_tlb_user() for both user and kernel mappings unless
- * the Page Global Enable (PGE) feature bit is set. */
+ * the Page Global Enable (PGE) feature bit is set.
+ */
*dx |= 0x00002000;
- /* We also lie, and say we're family id 5. 6 or greater
+ /*
+ * We also lie, and say we're family id 5. 6 or greater
* leads to a rdmsr in early_init_intel which we can't handle.
- * Family ID is returned as bits 8-12 in ax. */
+ * Family ID is returned as bits 8-12 in ax.
+ */
*ax &= 0xFFFFF0FF;
*ax |= 0x00000500;
break;
+ /*
+ * 0x80000000 returns the highest Extended Function, so we futureproof
+ * like we do above by limiting it to known fields.
+ */
case 0x80000000:
- /* Futureproof this a little: if they ask how much extended
- * processor information there is, limit it to known fields. */
if (*ax > 0x80000008)
*ax = 0x80000008;
break;
+
+ /*
+ * PAE systems can mark pages as non-executable. Linux calls this the
+ * NX bit. Intel calls it XD (eXecute Disable), AMD EVP (Enhanced
+ * Virus Protection). We just switch turn if off here, since we don't
+ * support it.
+ */
case 0x80000001:
- /* Here we should fix nx cap depending on host. */
- /* For this version of PAE, we just clear NX bit. */
*dx &= ~(1 << 20);
break;
}
}
-/* Intel has four control registers, imaginatively named cr0, cr2, cr3 and cr4.
+/*
+ * Intel has four control registers, imaginatively named cr0, cr2, cr3 and cr4.
* I assume there's a cr1, but it hasn't bothered us yet, so we'll not bother
* it. The Host needs to know when the Guest wants to change them, so we have
* a whole series of functions like read_cr0() and write_cr0().
* name like "FPUTRAP bit" be a little less cryptic?
*
* We store cr0 locally because the Host never changes it. The Guest sometimes
- * wants to read it and we'd prefer not to bother the Host unnecessarily. */
+ * wants to read it and we'd prefer not to bother the Host unnecessarily.
+ */
static unsigned long current_cr0;
static void lguest_write_cr0(unsigned long val)
{
return current_cr0;
}
-/* Intel provided a special instruction to clear the TS bit for people too cool
+/*
+ * Intel provided a special instruction to clear the TS bit for people too cool
* to use write_cr0() to do it. This "clts" instruction is faster, because all
- * the vowels have been optimized out. */
+ * the vowels have been optimized out.
+ */
static void lguest_clts(void)
{
lazy_hcall1(LHCALL_TS, 0);
current_cr0 &= ~X86_CR0_TS;
}
-/* cr2 is the virtual address of the last page fault, which the Guest only ever
+/*
+ * cr2 is the virtual address of the last page fault, which the Guest only ever
* reads. The Host kindly writes this into our "struct lguest_data", so we
- * just read it out of there. */
+ * just read it out of there.
+ */
static unsigned long lguest_read_cr2(void)
{
return lguest_data.cr2;
/* See lguest_set_pte() below. */
static bool cr3_changed = false;
-/* cr3 is the current toplevel pagetable page: the principle is the same as
+/*
+ * cr3 is the current toplevel pagetable page: the principle is the same as
* cr0. Keep a local copy, and tell the Host when it changes. The only
* difference is that our local copy is in lguest_data because the Host needs
- * to set it upon our initial hypercall. */
+ * to set it upon our initial hypercall.
+ */
static void lguest_write_cr3(unsigned long cr3)
{
lguest_data.pgdir = cr3;
* cr3 ---> +---------+
* | --------->+---------+
* | | | PADDR1 |
- * Top-level | | PADDR2 |
+ * Mid-level | | PADDR2 |
* (PMD) page | | |
* | | Lower-level |
* | | (PTE) page |
* Index into top Index into second Offset within page
* page directory page pagetable page
*
- * The kernel spends a lot of time changing both the top-level page directory
- * and lower-level pagetable pages. The Guest doesn't know physical addresses,
- * so while it maintains these page tables exactly like normal, it also needs
- * to keep the Host informed whenever it makes a change: the Host will create
- * the real page tables based on the Guests'.
+ * Now, unfortunately, this isn't the whole story: Intel added Physical Address
+ * Extension (PAE) to allow 32 bit systems to use 64GB of memory (ie. 36 bits).
+ * These are held in 64-bit page table entries, so we can now only fit 512
+ * entries in a page, and the neat three-level tree breaks down.
+ *
+ * The result is a four level page table:
+ *
+ * cr3 --> [ 4 Upper ]
+ * [ Level ]
+ * [ Entries ]
+ * [(PUD Page)]---> +---------+
+ * | --------->+---------+
+ * | | | PADDR1 |
+ * Mid-level | | PADDR2 |
+ * (PMD) page | | |
+ * | | Lower-level |
+ * | | (PTE) page |
+ * | | | |
+ * .... ....
+ *
+ *
+ * And the virtual address is decoded as:
+ *
+ * 1 1 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+ * |<-2->|<--- 9 bits ---->|<---- 9 bits --->|<------ 12 bits ------>|
+ * Index into Index into mid Index into lower Offset within page
+ * top entries directory page pagetable page
+ *
+ * It's too hard to switch between these two formats at runtime, so Linux only
+ * supports one or the other depending on whether CONFIG_X86_PAE is set. Many
+ * distributions turn it on, and not just for people with silly amounts of
+ * memory: the larger PTE entries allow room for the NX bit, which lets the
+ * kernel disable execution of pages and increase security.
+ *
+ * This was a problem for lguest, which couldn't run on these distributions;
+ * then Matias Zabaljauregui figured it all out and implemented it, and only a
+ * handful of puppies were crushed in the process!
+ *
+ * Back to our point: the kernel spends a lot of time changing both the
+ * top-level page directory and lower-level pagetable pages. The Guest doesn't
+ * know physical addresses, so while it maintains these page tables exactly
+ * like normal, it also needs to keep the Host informed whenever it makes a
+ * change: the Host will create the real page tables based on the Guests'.
*/
-/* The Guest calls this to set a second-level entry (pte), ie. to map a page
- * into a process' address space. We set the entry then tell the Host the
- * toplevel and address this corresponds to. The Guest uses one pagetable per
- * process, so we need to tell the Host which one we're changing (mm->pgd). */
+/*
+ * The Guest calls this after it has set a second-level entry (pte), ie. to map
+ * a page into a process' address space. Wetell the Host the toplevel and
+ * address this corresponds to. The Guest uses one pagetable per process, so
+ * we need to tell the Host which one we're changing (mm->pgd).
+ */
static void lguest_pte_update(struct mm_struct *mm, unsigned long addr,
pte_t *ptep)
{
#ifdef CONFIG_X86_PAE
+ /* PAE needs to hand a 64 bit page table entry, so it uses two args. */
lazy_hcall4(LHCALL_SET_PTE, __pa(mm->pgd), addr,
ptep->pte_low, ptep->pte_high);
#else
#endif
}
+/* This is the "set and update" combo-meal-deal version. */
static void lguest_set_pte_at(struct mm_struct *mm, unsigned long addr,
pte_t *ptep, pte_t pteval)
{
lguest_pte_update(mm, addr, ptep);
}
-/* The Guest calls lguest_set_pud to set a top-level entry and lguest_set_pmd
+/*
+ * The Guest calls lguest_set_pud to set a top-level entry and lguest_set_pmd
* to set a middle-level entry when PAE is activated.
+ *
* Again, we set the entry then tell the Host which page we changed,
- * and the index of the entry we changed. */
+ * and the index of the entry we changed.
+ */
#ifdef CONFIG_X86_PAE
static void lguest_set_pud(pud_t *pudp, pud_t pudval)
{
}
#else
-/* The Guest calls lguest_set_pmd to set a top-level entry when PAE is not
- * activated. */
+/* The Guest calls lguest_set_pmd to set a top-level entry when !PAE. */
static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
{
native_set_pmd(pmdp, pmdval);
}
#endif
-/* There are a couple of legacy places where the kernel sets a PTE, but we
+/*
+ * There are a couple of legacy places where the kernel sets a PTE, but we
* don't know the top level any more. This is useless for us, since we don't
* know which pagetable is changing or what address, so we just tell the Host
* to forget all of them. Fortunately, this is very rare.
* ... except in early boot when the kernel sets up the initial pagetables,
* which makes booting astonishingly slow: 1.83 seconds! So we don't even tell
* the Host anything changed until we've done the first page table switch,
- * which brings boot back to 0.25 seconds. */
+ * which brings boot back to 0.25 seconds.
+ */
static void lguest_set_pte(pte_t *ptep, pte_t pteval)
{
native_set_pte(ptep, pteval);
}
#ifdef CONFIG_X86_PAE
+/*
+ * With 64-bit PTE values, we need to be careful setting them: if we set 32
+ * bits at a time, the hardware could see a weird half-set entry. These
+ * versions ensure we update all 64 bits at once.
+ */
static void lguest_set_pte_atomic(pte_t *ptep, pte_t pte)
{
native_set_pte_atomic(ptep, pte);
lazy_hcall1(LHCALL_FLUSH_TLB, 1);
}
-void lguest_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+static void lguest_pte_clear(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep)
{
native_pte_clear(mm, addr, ptep);
lguest_pte_update(mm, addr, ptep);
}
-void lguest_pmd_clear(pmd_t *pmdp)
+static void lguest_pmd_clear(pmd_t *pmdp)
{
lguest_set_pmd(pmdp, __pmd(0));
}
#endif
-/* Unfortunately for Lguest, the pv_mmu_ops for page tables were based on
+/*
+ * Unfortunately for Lguest, the pv_mmu_ops for page tables were based on
* native page table operations. On native hardware you can set a new page
* table entry whenever you want, but if you want to remove one you have to do
* a TLB flush (a TLB is a little cache of page table entries kept by the CPU).
* called when a valid entry is written, not when it's removed (ie. marked not
* present). Instead, this is where we come when the Guest wants to remove a
* page table entry: we tell the Host to set that entry to 0 (ie. the present
- * bit is zero). */
+ * bit is zero).
+ */
static void lguest_flush_tlb_single(unsigned long addr)
{
/* Simply set it to zero: if it was not, it will fault back in. */
lazy_hcall3(LHCALL_SET_PTE, lguest_data.pgdir, addr, 0);
}
-/* This is what happens after the Guest has removed a large number of entries.
+/*
+ * This is what happens after the Guest has removed a large number of entries.
* This tells the Host that any of the page table entries for userspace might
- * have changed, ie. virtual addresses below PAGE_OFFSET. */
+ * have changed, ie. virtual addresses below PAGE_OFFSET.
+ */
static void lguest_flush_tlb_user(void)
{
lazy_hcall1(LHCALL_FLUSH_TLB, 0);
}
-/* This is called when the kernel page tables have changed. That's not very
+/*
+ * This is called when the kernel page tables have changed. That's not very
* common (unless the Guest is using highmem, which makes the Guest extremely
- * slow), so it's worth separating this from the user flushing above. */
+ * slow), so it's worth separating this from the user flushing above.
+ */
static void lguest_flush_tlb_kernel(void)
{
lazy_hcall1(LHCALL_FLUSH_TLB, 1);
.unmask = enable_lguest_irq,
};
-/* This sets up the Interrupt Descriptor Table (IDT) entry for each hardware
+/*
+ * This sets up the Interrupt Descriptor Table (IDT) entry for each hardware
* interrupt (except 128, which is used for system calls), and then tells the
* Linux infrastructure that each interrupt is controlled by our level-based
- * lguest interrupt controller. */
+ * lguest interrupt controller.
+ */
static void __init lguest_init_IRQ(void)
{
unsigned int i;
for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) {
- /* Some systems map "vectors" to interrupts weirdly. Lguest has
- * a straightforward 1 to 1 mapping, so force that here. */
+ /* Some systems map "vectors" to interrupts weirdly. Not us! */
__get_cpu_var(vector_irq)[i] = i - FIRST_EXTERNAL_VECTOR;
if (i != SYSCALL_VECTOR)
set_intr_gate(i, interrupt[i - FIRST_EXTERNAL_VECTOR]);
}
- /* This call is required to set up for 4k stacks, where we have
- * separate stacks for hard and soft interrupts. */
+
+ /*
+ * This call is required to set up for 4k stacks, where we have
+ * separate stacks for hard and soft interrupts.
+ */
irq_ctx_init(smp_processor_id());
}
+/*
+ * With CONFIG_SPARSE_IRQ, interrupt descriptors are allocated as-needed, so
+ * rather than set them in lguest_init_IRQ we are called here every time an
+ * lguest device needs an interrupt.
+ *
+ * FIXME: irq_to_desc_alloc_node() can fail due to lack of memory, we should
+ * pass that up!
+ */
void lguest_setup_irq(unsigned int irq)
{
irq_to_desc_alloc_node(irq, 0);
return lguest_data.time.tv_sec;
}
-/* The TSC is an Intel thing called the Time Stamp Counter. The Host tells us
+/*
+ * The TSC is an Intel thing called the Time Stamp Counter. The Host tells us
* what speed it runs at, or 0 if it's unusable as a reliable clock source.
* This matches what we want here: if we return 0 from this function, the x86
- * TSC clock will give up and not register itself. */
+ * TSC clock will give up and not register itself.
+ */
static unsigned long lguest_tsc_khz(void)
{
return lguest_data.tsc_khz;
}
-/* If we can't use the TSC, the kernel falls back to our lower-priority
- * "lguest_clock", where we read the time value given to us by the Host. */
+/*
+ * If we can't use the TSC, the kernel falls back to our lower-priority
+ * "lguest_clock", where we read the time value given to us by the Host.
+ */
static cycle_t lguest_clock_read(struct clocksource *cs)
{
unsigned long sec, nsec;
- /* Since the time is in two parts (seconds and nanoseconds), we risk
+ /*
+ * Since the time is in two parts (seconds and nanoseconds), we risk
* reading it just as it's changing from 99 & 0.999999999 to 100 and 0,
* and getting 99 and 0. As Linux tends to come apart under the stress
- * of time travel, we must be careful: */
+ * of time travel, we must be careful:
+ */
do {
/* First we read the seconds part. */
sec = lguest_data.time.tv_sec;
- /* This read memory barrier tells the compiler and the CPU that
+ /*
+ * This read memory barrier tells the compiler and the CPU that
* this can't be reordered: we have to complete the above
- * before going on. */
+ * before going on.
+ */
rmb();
/* Now we read the nanoseconds part. */
nsec = lguest_data.time.tv_nsec;
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
-/* We also need a "struct clock_event_device": Linux asks us to set it to go
+/*
+ * We also need a "struct clock_event_device": Linux asks us to set it to go
* off some time in the future. Actually, James Morris figured all this out, I
- * just applied the patch. */
+ * just applied the patch.
+ */
static int lguest_clockevent_set_next_event(unsigned long delta,
struct clock_event_device *evt)
{
.max_delta_ns = LG_CLOCK_MAX_DELTA,
};
-/* This is the Guest timer interrupt handler (hardware interrupt 0). We just
- * call the clockevent infrastructure and it does whatever needs doing. */
+/*
+ * This is the Guest timer interrupt handler (hardware interrupt 0). We just
+ * call the clockevent infrastructure and it does whatever needs doing.
+ */
static void lguest_time_irq(unsigned int irq, struct irq_desc *desc)
{
unsigned long flags;
local_irq_restore(flags);
}
-/* At some point in the boot process, we get asked to set up our timing
+/*
+ * At some point in the boot process, we get asked to set up our timing
* infrastructure. The kernel doesn't expect timer interrupts before this, but
* we cleverly initialized the "blocked_interrupts" field of "struct
- * lguest_data" so that timer interrupts were blocked until now. */
+ * lguest_data" so that timer interrupts were blocked until now.
+ */
static void lguest_time_init(void)
{
/* Set up the timer interrupt (0) to go to our simple timer routine */
* to work. They're pretty simple.
*/
-/* The Guest needs to tell the Host what stack it expects traps to use. For
+/*
+ * The Guest needs to tell the Host what stack it expects traps to use. For
* native hardware, this is part of the Task State Segment mentioned above in
* lguest_load_tr_desc(), but to help hypervisors there's this special call.
*
* We tell the Host the segment we want to use (__KERNEL_DS is the kernel data
* segment), the privilege level (we're privilege level 1, the Host is 0 and
* will not tolerate us trying to use that), the stack pointer, and the number
- * of pages in the stack. */
+ * of pages in the stack.
+ */
static void lguest_load_sp0(struct tss_struct *tss,
struct thread_struct *thread)
{
/* FIXME: Implement */
}
-/* There are times when the kernel wants to make sure that no memory writes are
+/*
+ * There are times when the kernel wants to make sure that no memory writes are
* caught in the cache (that they've all reached real hardware devices). This
* doesn't matter for the Guest which has virtual hardware.
*
{
}
-/* If the Guest expects to have an Advanced Programmable Interrupt Controller,
+/*
+ * If the Guest expects to have an Advanced Programmable Interrupt Controller,
* we play dumb by ignoring writes and returning 0 for reads. So it's no
* longer Programmable nor Controlling anything, and I don't think 8 lines of
* code qualifies for Advanced. It will also never interrupt anything. It
- * does, however, allow us to get through the Linux boot code. */
+ * does, however, allow us to get through the Linux boot code.
+ */
#ifdef CONFIG_X86_LOCAL_APIC
static void lguest_apic_write(u32 reg, u32 v)
{
kvm_hypercall0(LHCALL_HALT);
}
-/* The SHUTDOWN hypercall takes a string to describe what's happening, and
+/*
+ * The SHUTDOWN hypercall takes a string to describe what's happening, and
* an argument which says whether this to restart (reboot) the Guest or not.
*
* Note that the Host always prefers that the Guest speak in physical addresses
- * rather than virtual addresses, so we use __pa() here. */
+ * rather than virtual addresses, so we use __pa() here.
+ */
static void lguest_power_off(void)
{
kvm_hypercall2(LHCALL_SHUTDOWN, __pa("Power down"),
* nice to move it back to lguest_init. Patch welcome... */
atomic_notifier_chain_register(&panic_notifier_list, &paniced);
- /* The Linux bootloader header contains an "e820" memory map: the
- * Launcher populated the first entry with our memory limit. */
+ /*
+ *The Linux bootloader header contains an "e820" memory map: the
+ * Launcher populated the first entry with our memory limit.
+ */
e820_add_region(boot_params.e820_map[0].addr,
boot_params.e820_map[0].size,
boot_params.e820_map[0].type);
return "LGUEST";
}
-/* We will eventually use the virtio console device to produce console output,
+/*
+ * We will eventually use the virtio console device to produce console output,
* but before that is set up we use LHCALL_NOTIFY on normal memory to produce
- * console output. */
+ * console output.
+ */
static __init int early_put_chars(u32 vtermno, const char *buf, int count)
{
char scratch[17];
unsigned int len = count;
- /* We use a nul-terminated string, so we have to make a copy. Icky,
- * huh? */
+ /* We use a nul-terminated string, so we make a copy. Icky, huh? */
if (len > sizeof(scratch) - 1)
len = sizeof(scratch) - 1;
scratch[len] = '\0';
return len;
}
-/* Rebooting also tells the Host we're finished, but the RESTART flag tells the
- * Launcher to reboot us. */
+/*
+ * Rebooting also tells the Host we're finished, but the RESTART flag tells the
+ * Launcher to reboot us.
+ */
static void lguest_restart(char *reason)
{
kvm_hypercall2(LHCALL_SHUTDOWN, __pa(reason), LGUEST_SHUTDOWN_RESTART);
* fit comfortably.
*
* First we need assembly templates of each of the patchable Guest operations,
- * and these are in i386_head.S. */
+ * and these are in i386_head.S.
+ */
/*G:060 We construct a table from the assembler templates: */
static const struct lguest_insns
[PARAVIRT_PATCH(pv_irq_ops.save_fl)] = { lgstart_pushf, lgend_pushf },
};
-/* Now our patch routine is fairly simple (based on the native one in
+/*
+ * Now our patch routine is fairly simple (based on the native one in
* paravirt.c). If we have a replacement, we copy it in and return how much of
- * the available space we used. */
+ * the available space we used.
+ */
static unsigned lguest_patch(u8 type, u16 clobber, void *ibuf,
unsigned long addr, unsigned len)
{
insn_len = lguest_insns[type].end - lguest_insns[type].start;
- /* Similarly if we can't fit replacement (shouldn't happen, but let's
- * be thorough). */
+ /* Similarly if it can't fit (doesn't happen, but let's be thorough). */
if (len < insn_len)
return paravirt_patch_default(type, clobber, ibuf, addr, len);
return insn_len;
}
-/*G:030 Once we get to lguest_init(), we know we're a Guest. The various
+/*G:029
+ * Once we get to lguest_init(), we know we're a Guest. The various
* pv_ops structures in the kernel provide points for (almost) every routine we
- * have to override to avoid privileged instructions. */
+ * have to override to avoid privileged instructions.
+ */
__init void lguest_init(void)
{
- /* We're under lguest, paravirt is enabled, and we're running at
- * privilege level 1, not 0 as normal. */
+ /* We're under lguest. */
pv_info.name = "lguest";
+ /* Paravirt is enabled. */
pv_info.paravirt_enabled = 1;
+ /* We're running at privilege level 1, not 0 as normal. */
pv_info.kernel_rpl = 1;
+ /* Everyone except Xen runs with this set. */
pv_info.shared_kernel_pmd = 1;
- /* We set up all the lguest overrides for sensitive operations. These
- * are detailed with the operations themselves. */
+ /*
+ * We set up all the lguest overrides for sensitive operations. These
+ * are detailed with the operations themselves.
+ */
- /* interrupt-related operations */
+ /* Interrupt-related operations */
pv_irq_ops.init_IRQ = lguest_init_IRQ;
pv_irq_ops.save_fl = PV_CALLEE_SAVE(save_fl);
pv_irq_ops.restore_fl = __PV_IS_CALLEE_SAVE(lg_restore_fl);
pv_irq_ops.irq_enable = __PV_IS_CALLEE_SAVE(lg_irq_enable);
pv_irq_ops.safe_halt = lguest_safe_halt;
- /* init-time operations */
+ /* Setup operations */
pv_init_ops.memory_setup = lguest_memory_setup;
pv_init_ops.patch = lguest_patch;
- /* Intercepts of various cpu instructions */
+ /* Intercepts of various CPU instructions */
pv_cpu_ops.load_gdt = lguest_load_gdt;
pv_cpu_ops.cpuid = lguest_cpuid;
pv_cpu_ops.load_idt = lguest_load_idt;
pv_cpu_ops.start_context_switch = paravirt_start_context_switch;
pv_cpu_ops.end_context_switch = lguest_end_context_switch;
- /* pagetable management */
+ /* Pagetable management */
pv_mmu_ops.write_cr3 = lguest_write_cr3;
pv_mmu_ops.flush_tlb_user = lguest_flush_tlb_user;
pv_mmu_ops.flush_tlb_single = lguest_flush_tlb_single;
pv_mmu_ops.pte_update_defer = lguest_pte_update;
#ifdef CONFIG_X86_LOCAL_APIC
- /* apic read/write intercepts */
+ /* APIC read/write intercepts */
set_lguest_basic_apic_ops();
#endif
- /* time operations */
+ /* Time operations */
pv_time_ops.get_wallclock = lguest_get_wallclock;
pv_time_ops.time_init = lguest_time_init;
pv_time_ops.get_tsc_khz = lguest_tsc_khz;
- /* Now is a good time to look at the implementations of these functions
- * before returning to the rest of lguest_init(). */
+ /*
+ * Now is a good time to look at the implementations of these functions
+ * before returning to the rest of lguest_init().
+ */
- /*G:070 Now we've seen all the paravirt_ops, we return to
+ /*G:070
+ * Now we've seen all the paravirt_ops, we return to
* lguest_init() where the rest of the fairly chaotic boot setup
- * occurs. */
+ * occurs.
+ */
- /* The stack protector is a weird thing where gcc places a canary
+ /*
+ * The stack protector is a weird thing where gcc places a canary
* value on the stack and then checks it on return. This file is
* compiled with -fno-stack-protector it, so we got this far without
* problems. The value of the canary is kept at offset 20 from the
* %gs register, so we need to set that up before calling C functions
- * in other files. */
+ * in other files.
+ */
setup_stack_canary_segment(0);
- /* We could just call load_stack_canary_segment(), but we might as
- * call switch_to_new_gdt() which loads the whole table and sets up
- * the per-cpu segment descriptor register %fs as well. */
+
+ /*
+ * We could just call load_stack_canary_segment(), but we might as well
+ * call switch_to_new_gdt() which loads the whole table and sets up the
+ * per-cpu segment descriptor register %fs as well.
+ */
switch_to_new_gdt(0);
- /* As described in head_32.S, we map the first 128M of memory. */
+ /* We actually boot with all memory mapped, but let's say 128MB. */
max_pfn_mapped = (128*1024*1024) >> PAGE_SHIFT;
- /* The Host<->Guest Switcher lives at the top of our address space, and
+ /*
+ * The Host<->Guest Switcher lives at the top of our address space, and
* the Host told us how big it is when we made LGUEST_INIT hypercall:
- * it put the answer in lguest_data.reserve_mem */
+ * it put the answer in lguest_data.reserve_mem
+ */
reserve_top_address(lguest_data.reserve_mem);
- /* If we don't initialize the lock dependency checker now, it crashes
- * paravirt_disable_iospace. */
+ /*
+ * If we don't initialize the lock dependency checker now, it crashes
+ * paravirt_disable_iospace.
+ */
lockdep_init();
- /* The IDE code spends about 3 seconds probing for disks: if we reserve
+ /*
+ * The IDE code spends about 3 seconds probing for disks: if we reserve
* all the I/O ports up front it can't get them and so doesn't probe.
* Other device drivers are similar (but less severe). This cuts the
- * kernel boot time on my machine from 4.1 seconds to 0.45 seconds. */
+ * kernel boot time on my machine from 4.1 seconds to 0.45 seconds.
+ */
paravirt_disable_iospace();
- /* This is messy CPU setup stuff which the native boot code does before
- * start_kernel, so we have to do, too: */
+ /*
+ * This is messy CPU setup stuff which the native boot code does before
+ * start_kernel, so we have to do, too:
+ */
cpu_detect(&new_cpu_data);
/* head.S usually sets up the first capability word, so do it here. */
new_cpu_data.x86_capability[0] = cpuid_edx(1);
acpi_ht = 0;
#endif
- /* We set the preferred console to "hvc". This is the "hypervisor
+ /*
+ * We set the preferred console to "hvc". This is the "hypervisor
* virtual console" driver written by the PowerPC people, which we also
- * adapted for lguest's use. */
+ * adapted for lguest's use.
+ */
add_preferred_console("hvc", 0, NULL);
/* Register our very early console. */
virtio_cons_early_init(early_put_chars);
- /* Last of all, we set the power management poweroff hook to point to
+ /*
+ * Last of all, we set the power management poweroff hook to point to
* the Guest routine to power off, and the reboot hook to our restart
- * routine. */
+ * routine.
+ */
pm_power_off = lguest_power_off;
machine_ops.restart = lguest_restart;
- /* Now we're set up, call i386_start_kernel() in head32.c and we proceed
- * to boot as normal. It never returns. */
+ /*
+ * Now we're set up, call i386_start_kernel() in head32.c and we proceed
+ * to boot as normal. It never returns.
+ */
i386_start_kernel();
}
/*
#include <asm/thread_info.h>
#include <asm/processor-flags.h>
-/*G:020 Our story starts with the kernel booting into startup_32 in
+/*G:020
+ * Our story starts with the kernel booting into startup_32 in
* arch/x86/kernel/head_32.S. It expects a boot header, which is created by
* the bootloader (the Launcher in our case).
*
* data without remembering to subtract __PAGE_OFFSET!
*
* The .section line puts this code in .init.text so it will be discarded after
- * boot. */
+ * boot.
+ */
.section .init.text, "ax", @progbits
ENTRY(lguest_entry)
- /* We make the "initialization" hypercall now to tell the Host about
- * us, and also find out where it put our page tables. */
+ /*
+ * We make the "initialization" hypercall now to tell the Host about
+ * us, and also find out where it put our page tables.
+ */
movl $LHCALL_LGUEST_INIT, %eax
movl $lguest_data - __PAGE_OFFSET, %ebx
.byte 0x0f,0x01,0xc1 /* KVM_HYPERCALL */
/* Set up the initial stack so we can run C code. */
movl $(init_thread_union+THREAD_SIZE),%esp
- /* Jumps are relative, and we're running __PAGE_OFFSET too low at the
- * moment. */
+ /* Jumps are relative: we're running __PAGE_OFFSET too low. */
jmp lguest_init+__PAGE_OFFSET
-/*G:055 We create a macro which puts the assembler code between lgstart_ and
- * lgend_ markers. These templates are put in the .text section: they can't be
- * discarded after boot as we may need to patch modules, too. */
+/*G:055
+ * We create a macro which puts the assembler code between lgstart_ and lgend_
+ * markers. These templates are put in the .text section: they can't be
+ * discarded after boot as we may need to patch modules, too.
+ */
.text
#define LGUEST_PATCH(name, insns...) \
lgstart_##name: insns; lgend_##name:; \
LGUEST_PATCH(cli, movl $0, lguest_data+LGUEST_DATA_irq_enabled)
LGUEST_PATCH(pushf, movl lguest_data+LGUEST_DATA_irq_enabled, %eax)
-/*G:033 But using those wrappers is inefficient (we'll see why that doesn't
- * matter for save_fl and irq_disable later). If we write our routines
- * carefully in assembler, we can avoid clobbering any registers and avoid
- * jumping through the wrapper functions.
+/*G:033
+ * But using those wrappers is inefficient (we'll see why that doesn't matter
+ * for save_fl and irq_disable later). If we write our routines carefully in
+ * assembler, we can avoid clobbering any registers and avoid jumping through
+ * the wrapper functions.
*
* I skipped over our first piece of assembler, but this one is worth studying
- * in a bit more detail so I'll describe in easy stages. First, the routine
- * to enable interrupts: */
+ * in a bit more detail so I'll describe in easy stages. First, the routine to
+ * enable interrupts:
+ */
ENTRY(lg_irq_enable)
- /* The reverse of irq_disable, this sets lguest_data.irq_enabled to
- * X86_EFLAGS_IF (ie. "Interrupts enabled"). */
+ /*
+ * The reverse of irq_disable, this sets lguest_data.irq_enabled to
+ * X86_EFLAGS_IF (ie. "Interrupts enabled").
+ */
movl $X86_EFLAGS_IF, lguest_data+LGUEST_DATA_irq_enabled
- /* But now we need to check if the Host wants to know: there might have
+ /*
+ * But now we need to check if the Host wants to know: there might have
* been interrupts waiting to be delivered, in which case it will have
* set lguest_data.irq_pending to X86_EFLAGS_IF. If it's not zero, we
- * jump to send_interrupts, otherwise we're done. */
+ * jump to send_interrupts, otherwise we're done.
+ */
testl $0, lguest_data+LGUEST_DATA_irq_pending
jnz send_interrupts
- /* One cool thing about x86 is that you can do many things without using
+ /*
+ * One cool thing about x86 is that you can do many things without using
* a register. In this case, the normal path hasn't needed to save or
- * restore any registers at all! */
+ * restore any registers at all!
+ */
ret
send_interrupts:
- /* OK, now we need a register: eax is used for the hypercall number,
+ /*
+ * OK, now we need a register: eax is used for the hypercall number,
* which is LHCALL_SEND_INTERRUPTS.
*
* We used not to bother with this pending detection at all, which was
* much simpler. Sooner or later the Host would realize it had to
* send us an interrupt. But that turns out to make performance 7
* times worse on a simple tcp benchmark. So now we do this the hard
- * way. */
+ * way.
+ */
pushl %eax
movl $LHCALL_SEND_INTERRUPTS, %eax
- /* This is a vmcall instruction (same thing that KVM uses). Older
+ /*
+ * This is a vmcall instruction (same thing that KVM uses). Older
* assembler versions might not know the "vmcall" instruction, so we
- * create one manually here. */
+ * create one manually here.
+ */
.byte 0x0f,0x01,0xc1 /* KVM_HYPERCALL */
+ /* Put eax back the way we found it. */
popl %eax
ret
-/* Finally, the "popf" or "restore flags" routine. The %eax register holds the
+/*
+ * Finally, the "popf" or "restore flags" routine. The %eax register holds the
* flags (in practice, either X86_EFLAGS_IF or 0): if it's X86_EFLAGS_IF we're
- * enabling interrupts again, if it's 0 we're leaving them off. */
+ * enabling interrupts again, if it's 0 we're leaving them off.
+ */
ENTRY(lg_restore_fl)
/* This is just "lguest_data.irq_enabled = flags;" */
movl %eax, lguest_data+LGUEST_DATA_irq_enabled
- /* Now, if the %eax value has enabled interrupts and
+ /*
+ * Now, if the %eax value has enabled interrupts and
* lguest_data.irq_pending is set, we want to tell the Host so it can
* deliver any outstanding interrupts. Fortunately, both values will
* be X86_EFLAGS_IF (ie. 512) in that case, and the "testl"
* instruction will AND them together for us. If both are set, we
- * jump to send_interrupts. */
+ * jump to send_interrupts.
+ */
testl lguest_data+LGUEST_DATA_irq_pending, %eax
jnz send_interrupts
/* Again, the normal path has used no extra registers. Clever, huh? */
ret
+/*:*/
/* These demark the EIP range where host should never deliver interrupts. */
.global lguest_noirq_start
.global lguest_noirq_end
-/*M:004 When the Host reflects a trap or injects an interrupt into the Guest,
- * it sets the eflags interrupt bit on the stack based on
- * lguest_data.irq_enabled, so the Guest iret logic does the right thing when
- * restoring it. However, when the Host sets the Guest up for direct traps,
- * such as system calls, the processor is the one to push eflags onto the
- * stack, and the interrupt bit will be 1 (in reality, interrupts are always
- * enabled in the Guest).
+/*M:004
+ * When the Host reflects a trap or injects an interrupt into the Guest, it
+ * sets the eflags interrupt bit on the stack based on lguest_data.irq_enabled,
+ * so the Guest iret logic does the right thing when restoring it. However,
+ * when the Host sets the Guest up for direct traps, such as system calls, the
+ * processor is the one to push eflags onto the stack, and the interrupt bit
+ * will be 1 (in reality, interrupts are always enabled in the Guest).
*
* This turns out to be harmless: the only trap which should happen under Linux
* with interrupts disabled is Page Fault (due to our lazy mapping of vmalloc
* regions), which has to be reflected through the Host anyway. If another
* trap *does* go off when interrupts are disabled, the Guest will panic, and
- * we'll never get to this iret! :*/
+ * we'll never get to this iret!
+:*/
-/*G:045 There is one final paravirt_op that the Guest implements, and glancing
- * at it you can see why I left it to last. It's *cool*! It's in *assembler*!
+/*G:045
+ * There is one final paravirt_op that the Guest implements, and glancing at it
+ * you can see why I left it to last. It's *cool*! It's in *assembler*!
*
* The "iret" instruction is used to return from an interrupt or trap. The
* stack looks like this:
* return to userspace or wherever. Our solution to this is to surround the
* code with lguest_noirq_start: and lguest_noirq_end: labels. We tell the
* Host that it is *never* to interrupt us there, even if interrupts seem to be
- * enabled. */
+ * enabled.
+ */
ENTRY(lguest_iret)
pushl %eax
movl 12(%esp), %eax
lguest_noirq_start:
- /* Note the %ss: segment prefix here. Normal data accesses use the
+ /*
+ * Note the %ss: segment prefix here. Normal data accesses use the
* "ds" segment, but that will have already been restored for whatever
* we're returning to (such as userspace): we can't trust it. The %ss:
- * prefix makes sure we use the stack segment, which is still valid. */
+ * prefix makes sure we use the stack segment, which is still valid.
+ */
movl %eax,%ss:lguest_data+LGUEST_DATA_irq_enabled
popl %eax
iret
rv.msrs = msrs;
rv.msr_no = msr_no;
- preempt_disable();
- /*
- * FIXME: handle the CPU we're executing on separately for now until
- * smp_call_function_many has been fixed to not skip it.
- */
- this_cpu = raw_smp_processor_id();
- smp_call_function_single(this_cpu, __rdmsr_on_cpu, &rv, 1);
+ this_cpu = get_cpu();
+
+ if (cpumask_test_cpu(this_cpu, mask))
+ __rdmsr_on_cpu(&rv);
smp_call_function_many(mask, __rdmsr_on_cpu, &rv, 1);
- preempt_enable();
+ put_cpu();
}
EXPORT_SYMBOL(rdmsr_on_cpus);
rv.msrs = msrs;
rv.msr_no = msr_no;
- preempt_disable();
- /*
- * FIXME: handle the CPU we're executing on separately for now until
- * smp_call_function_many has been fixed to not skip it.
- */
- this_cpu = raw_smp_processor_id();
- smp_call_function_single(this_cpu, __wrmsr_on_cpu, &rv, 1);
+ this_cpu = get_cpu();
+
+ if (cpumask_test_cpu(this_cpu, mask))
+ __wrmsr_on_cpu(&rv);
smp_call_function_many(mask, __wrmsr_on_cpu, &rv, 1);
- preempt_enable();
+ put_cpu();
}
EXPORT_SYMBOL(wrmsr_on_cpus);
if (!printk_ratelimit())
return;
- printk(KERN_CONT "%s%s[%d]: segfault at %lx ip %p sp %p error %lx",
+ printk("%s%s[%d]: segfault at %lx ip %p sp %p error %lx",
task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG,
tsk->comm, task_pid_nr(tsk), address,
(void *)regs->ip, (void *)regs->sp, error_code);
EXPORT_SYMBOL(kunmap);
EXPORT_SYMBOL(kmap_atomic);
EXPORT_SYMBOL(kunmap_atomic);
+EXPORT_SYMBOL(kmap_atomic_prot);
void __init set_highmem_pages_init(void)
{
return ret;
#else
- reserve_bootmem(phys, len, BOOTMEM_DEFAULT);
+ reserve_bootmem(phys, len, flags);
#endif
if (phys+len <= MAX_DMA_PFN*PAGE_SIZE) {
kmemcheck_shadow_set(shadow, size);
}
+bool kmemcheck_is_obj_initialized(unsigned long addr, size_t size)
+{
+ enum kmemcheck_shadow status;
+ void *shadow;
+
+ shadow = kmemcheck_shadow_lookup(addr);
+ if (!shadow)
+ return true;
+
+ status = kmemcheck_shadow_test(shadow, size);
+
+ return status == KMEMCHECK_SHADOW_INITIALIZED;
+}
+
/* Access may cross page boundary */
static void kmemcheck_read(struct pt_regs *regs,
unsigned long addr, unsigned int size)
unsigned int level;
pte_t *kpte, old_pte;
- if (cpa->flags & CPA_PAGES_ARRAY)
- address = (unsigned long)page_address(cpa->pages[cpa->curpage]);
- else if (cpa->flags & CPA_ARRAY)
+ if (cpa->flags & CPA_PAGES_ARRAY) {
+ struct page *page = cpa->pages[cpa->curpage];
+ if (unlikely(PageHighMem(page)))
+ return 0;
+ address = (unsigned long)page_address(page);
+ } else if (cpa->flags & CPA_ARRAY)
address = cpa->vaddr[cpa->curpage];
else
address = *cpa->vaddr;
* No need to redo, when the primary call touched the direct
* mapping already:
*/
- if (cpa->flags & CPA_PAGES_ARRAY)
- vaddr = (unsigned long)page_address(cpa->pages[cpa->curpage]);
- else if (cpa->flags & CPA_ARRAY)
+ if (cpa->flags & CPA_PAGES_ARRAY) {
+ struct page *page = cpa->pages[cpa->curpage];
+ if (unlikely(PageHighMem(page)))
+ return 0;
+ vaddr = (unsigned long)page_address(page);
+ } else if (cpa->flags & CPA_ARRAY)
vaddr = cpa->vaddr[cpa->curpage];
else
vaddr = *cpa->vaddr;
int _set_memory_wc(unsigned long addr, int numpages)
{
int ret;
+ unsigned long addr_copy = addr;
+
ret = change_page_attr_set(&addr, numpages,
__pgprot(_PAGE_CACHE_UC_MINUS), 0);
-
if (!ret) {
- ret = change_page_attr_set(&addr, numpages,
- __pgprot(_PAGE_CACHE_WC), 0);
+ ret = change_page_attr_set_clr(&addr_copy, numpages,
+ __pgprot(_PAGE_CACHE_WC),
+ __pgprot(_PAGE_CACHE_MASK),
+ 0, 0, NULL);
}
return ret;
}
int free_idx;
for (i = 0; i < addrinarray; i++) {
- start = (unsigned long)page_address(pages[i]);
+ if (PageHighMem(pages[i]))
+ continue;
+ start = page_to_pfn(pages[i]) << PAGE_SHIFT;
end = start + PAGE_SIZE;
if (reserve_memtype(start, end, _PAGE_CACHE_UC_MINUS, NULL))
goto err_out;
err_out:
free_idx = i;
for (i = 0; i < free_idx; i++) {
- start = (unsigned long)page_address(pages[i]);
+ if (PageHighMem(pages[i]))
+ continue;
+ start = page_to_pfn(pages[i]) << PAGE_SHIFT;
end = start + PAGE_SIZE;
free_memtype(start, end);
}
return retval;
for (i = 0; i < addrinarray; i++) {
- start = (unsigned long)page_address(pages[i]);
+ if (PageHighMem(pages[i]))
+ continue;
+ start = page_to_pfn(pages[i]) << PAGE_SHIFT;
end = start + PAGE_SIZE;
free_memtype(start, end);
}
return ret;
if (flags != want_flags) {
- if (strict_prot || !is_new_memtype_allowed(want_flags, flags)) {
+ if (strict_prot ||
+ !is_new_memtype_allowed(paddr, size, want_flags, flags)) {
free_memtype(paddr, paddr + size);
printk(KERN_ERR "%s:%d map pfn expected mapping type %s"
" for %Lx-%Lx, got %s\n",
return pte;
}
-void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte)
+void ___pte_free_tlb(struct mmu_gather *tlb, struct page *pte)
{
pgtable_page_dtor(pte);
paravirt_release_pte(page_to_pfn(pte));
}
#if PAGETABLE_LEVELS > 2
-void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
+void ___pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
{
paravirt_release_pmd(__pa(pmd) >> PAGE_SHIFT);
tlb_remove_page(tlb, virt_to_page(pmd));
}
#if PAGETABLE_LEVELS > 3
-void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud)
+void ___pud_free_tlb(struct mmu_gather *tlb, pud_t *pud)
{
paravirt_release_pud(__pa(pud) >> PAGE_SHIFT);
tlb_remove_page(tlb, virt_to_page(pud));
printk(KERN_INFO "Reserving virtual address space above 0x%08x\n",
(int)-reserve);
__FIXADDR_TOP = -reserve - PAGE_SIZE;
- __VMALLOC_RESERVE += reserve;
#endif
}
acpi_numa = -1;
for (i = 0; i < MAX_LOCAL_APIC; i++)
apicid_to_node[i] = NUMA_NO_NODE;
- for (i = 0; i < MAX_NUMNODES; i++)
- nodes_add[i].start = nodes[i].end = 0;
+ for (i = 0; i < MAX_NUMNODES; i++) {
+ nodes[i].start = nodes[i].end = 0;
+ nodes_add[i].start = nodes_add[i].end = 0;
+ }
remove_all_active_ranges();
}
f->flush_mm = mm;
f->flush_va = va;
- cpumask_andnot(to_cpumask(f->flush_cpumask),
- cpumask, cpumask_of(smp_processor_id()));
-
- /*
- * We have to send the IPI only to
- * CPUs affected.
- */
- apic->send_IPI_mask(to_cpumask(f->flush_cpumask),
- INVALIDATE_TLB_VECTOR_START + sender);
+ if (cpumask_andnot(to_cpumask(f->flush_cpumask), cpumask, cpumask_of(smp_processor_id()))) {
+ /*
+ * We have to send the IPI only to
+ * CPUs affected.
+ */
+ apic->send_IPI_mask(to_cpumask(f->flush_cpumask),
+ INVALIDATE_TLB_VECTOR_START + sender);
- while (!cpumask_empty(to_cpumask(f->flush_cpumask)))
- cpu_relax();
+ while (!cpumask_empty(to_cpumask(f->flush_cpumask)))
+ cpu_relax();
+ }
f->flush_mm = NULL;
f->flush_va = 0;
#include <asm/pat.h>
#include <asm/e820.h>
#include <asm/pci_x86.h>
+#include <asm/io_apic.h>
static int
pcibios_allocate_resources(1);
e820_reserve_resources_late();
+ /*
+ * Insert the IO APIC resources after PCI initialization has
+ * occured to handle IO APICS that are mapped in on a BAR in
+ * PCI space, but before trying to assign unassigned pci res.
+ */
+ ioapic_insert_resources();
}
/**
CFLAGS_REMOVE_irq.o = -pg
endif
+# Make sure early boot has no stackprotector
+nostackp := $(call cc-option, -fno-stack-protector)
+CFLAGS_enlighten.o := $(nostackp)
+
obj-y := enlighten.o setup.o multicalls.o mmu.o irq.o \
time.o xen-asm.o xen-asm_$(BITS).o \
grant-table.o suspend.o
(1 << X86_FEATURE_ACPI)); /* disable ACPI */
ax = 1;
+ cx = 0;
xen_cpuid(&ax, &bx, &cx, &dx);
/* cpuid claims we support xsave; try enabling it to see what happens */
xen_domain_type = XEN_PV_DOMAIN;
- BUG_ON(memcmp(xen_start_info->magic, "xen-3", 5) != 0);
-
- xen_setup_features();
-
/* Install Xen paravirt ops */
pv_info = xen_info;
pv_init_ops = xen_init_ops;
pv_apic_ops = xen_apic_ops;
pv_mmu_ops = xen_mmu_ops;
- xen_init_irq_ops();
+#ifdef CONFIG_X86_64
+ /*
+ * Setup percpu state. We only need to do this for 64-bit
+ * because 32-bit already has %fs set properly.
+ */
+ load_percpu_segment(0);
+#endif
+ xen_init_irq_ops();
xen_init_cpuid_mask();
#ifdef CONFIG_X86_LOCAL_APIC
set_xen_basic_apic_ops();
#endif
+ xen_setup_features();
+
if (xen_feature(XENFEAT_mmu_pt_update_preserve_ad)) {
pv_mmu_ops.ptep_modify_prot_start = xen_ptep_modify_prot_start;
pv_mmu_ops.ptep_modify_prot_commit = xen_ptep_modify_prot_commit;
machine_ops = xen_machine_ops;
-#ifdef CONFIG_X86_64
- /*
- * Setup percpu state. We only need to do this for 64-bit
- * because 32-bit already has %fs set properly.
- */
- load_percpu_segment(0);
-#endif
/*
* The only reliable way to retain the initial address of the
* percpu gdt_page is to remember it here, so we can go and
/* set up basic CPUID stuff */
cpu_detect(&new_cpu_data);
new_cpu_data.hard_math = 1;
+ new_cpu_data.wp_works_ok = 1;
new_cpu_data.x86_capability[0] = cpuid_edx(1);
#endif
#include <asm-generic/tlb.h>
-#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, pte)
+#define __pte_free_tlb(tlb, pte, address) pte_free((tlb)->mm, pte)
#endif /* _XTENSA_TLB_H */
If unsure, say Y.
config BLK_DEV_BSG
- bool "Block layer SG support v4 (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- ---help---
+ bool "Block layer SG support v4"
+ default y
+ help
Saying Y here will enable generic SG (SCSI generic) v4 support
for any block device.
protocols (e.g. Task Management Functions and SMP in Serial
Attached SCSI).
- If unsure, say N.
+ This option is required by recent UDEV versions to properly
+ access device serial numbers, etc.
+
+ If unsure, say Y.
config BLK_DEV_INTEGRITY
bool "Block layer data integrity support"
(VM_MAX_READAHEAD * 1024) / PAGE_CACHE_SIZE;
q->backing_dev_info.state = 0;
q->backing_dev_info.capabilities = BDI_CAP_MAP_COPY;
+ q->backing_dev_info.name = "block";
err = bdi_init(&q->backing_dev_info);
if (err) {
return NULL;
}
- /*
- * if caller didn't supply a lock, they get per-queue locking with
- * our embedded lock
- */
- if (!lock)
- lock = &q->__queue_lock;
-
q->request_fn = rfn;
q->prep_rq_fn = NULL;
q->unplug_fn = generic_unplug_device;
{
return blk_end_bidi_request(rq, error, nr_bytes, 0);
}
-EXPORT_SYMBOL_GPL(blk_end_request);
+EXPORT_SYMBOL(blk_end_request);
/**
* blk_end_request_all - Helper function for drives to finish the request.
pending = blk_end_bidi_request(rq, error, blk_rq_bytes(rq), bidi_bytes);
BUG_ON(pending);
}
-EXPORT_SYMBOL_GPL(blk_end_request_all);
+EXPORT_SYMBOL(blk_end_request_all);
/**
* blk_end_request_cur - Helper function to finish the current request chunk.
{
return blk_end_request(rq, error, blk_rq_cur_bytes(rq));
}
-EXPORT_SYMBOL_GPL(blk_end_request_cur);
+EXPORT_SYMBOL(blk_end_request_cur);
/**
* __blk_end_request - Helper function for drivers to complete the request.
{
return __blk_end_bidi_request(rq, error, nr_bytes, 0);
}
-EXPORT_SYMBOL_GPL(__blk_end_request);
+EXPORT_SYMBOL(__blk_end_request);
/**
* __blk_end_request_all - Helper function for drives to finish the request.
pending = __blk_end_bidi_request(rq, error, blk_rq_bytes(rq), bidi_bytes);
BUG_ON(pending);
}
-EXPORT_SYMBOL_GPL(__blk_end_request_all);
+EXPORT_SYMBOL(__blk_end_request_all);
/**
* __blk_end_request_cur - Helper function to finish the current request chunk.
{
return __blk_end_request(rq, error, blk_rq_cur_bytes(rq));
}
-EXPORT_SYMBOL_GPL(__blk_end_request_cur);
+EXPORT_SYMBOL(__blk_end_request_cur);
void blk_rq_bio_prep(struct request_queue *q, struct request *rq,
struct bio *bio)
kobject_uevent(&bi->kobj, KOBJ_REMOVE);
kobject_del(&bi->kobj);
+ kobject_put(&bi->kobj);
kmem_cache_free(integrity_cachep, bi);
disk->integrity = NULL;
}
#include <linux/bio.h>
#include <linux/blkdev.h>
#include <linux/bootmem.h> /* for max_pfn/max_low_pfn */
+#include <linux/gcd.h>
#include "blk.h"
blk_set_default_limits(&q->limits);
+ /*
+ * If the caller didn't supply a lock, fall back to our embedded
+ * per-queue locks
+ */
+ if (!q->queue_lock)
+ q->queue_lock = &q->__queue_lock;
+
/*
* by default assume old behaviour and bounce for any highmem page
*/
EXPORT_SYMBOL(blk_queue_alignment_offset);
/**
- * blk_queue_io_min - set minimum request size for the queue
- * @q: the request queue for the device
+ * blk_limits_io_min - set minimum request size for a device
+ * @limits: the queue limits
* @min: smallest I/O size in bytes
*
* Description:
* smallest I/O the device can perform without incurring a performance
* penalty.
*/
-void blk_queue_io_min(struct request_queue *q, unsigned int min)
+void blk_limits_io_min(struct queue_limits *limits, unsigned int min)
{
- q->limits.io_min = min;
+ limits->io_min = min;
- if (q->limits.io_min < q->limits.logical_block_size)
- q->limits.io_min = q->limits.logical_block_size;
+ if (limits->io_min < limits->logical_block_size)
+ limits->io_min = limits->logical_block_size;
- if (q->limits.io_min < q->limits.physical_block_size)
- q->limits.io_min = q->limits.physical_block_size;
+ if (limits->io_min < limits->physical_block_size)
+ limits->io_min = limits->physical_block_size;
+}
+EXPORT_SYMBOL(blk_limits_io_min);
+
+/**
+ * blk_queue_io_min - set minimum request size for the queue
+ * @q: the request queue for the device
+ * @min: smallest I/O size in bytes
+ *
+ * Description:
+ * Storage devices may report a granularity or preferred minimum I/O
+ * size which is the smallest request the device can perform without
+ * incurring a performance penalty. For disk drives this is often the
+ * physical block size. For RAID arrays it is often the stripe chunk
+ * size. A properly aligned multiple of minimum_io_size is the
+ * preferred request size for workloads where a high number of I/O
+ * operations is desired.
+ */
+void blk_queue_io_min(struct request_queue *q, unsigned int min)
+{
+ blk_limits_io_min(&q->limits, min);
}
EXPORT_SYMBOL(blk_queue_io_min);
* @opt: optimal request size in bytes
*
* Description:
- * Drivers can call this function to set the preferred I/O request
- * size for devices that report such a value.
+ * Storage devices may report an optimal I/O size, which is the
+ * device's preferred unit for sustained I/O. This is rarely reported
+ * for disk drives. For RAID arrays it is usually the stripe width or
+ * the internal track size. A properly aligned multiple of
+ * optimal_io_size is the preferred request size for workloads where
+ * sustained throughput is desired.
*/
void blk_queue_io_opt(struct request_queue *q, unsigned int opt)
{
**/
void blk_queue_stack_limits(struct request_queue *t, struct request_queue *b)
{
- /* zero is "infinity" */
- t->limits.max_sectors = min_not_zero(queue_max_sectors(t),
- queue_max_sectors(b));
-
- t->limits.max_hw_sectors = min_not_zero(queue_max_hw_sectors(t),
- queue_max_hw_sectors(b));
-
- t->limits.seg_boundary_mask = min_not_zero(queue_segment_boundary(t),
- queue_segment_boundary(b));
-
- t->limits.max_phys_segments = min_not_zero(queue_max_phys_segments(t),
- queue_max_phys_segments(b));
-
- t->limits.max_hw_segments = min_not_zero(queue_max_hw_segments(t),
- queue_max_hw_segments(b));
-
- t->limits.max_segment_size = min_not_zero(queue_max_segment_size(t),
- queue_max_segment_size(b));
-
- t->limits.logical_block_size = max(queue_logical_block_size(t),
- queue_logical_block_size(b));
+ blk_stack_limits(&t->limits, &b->limits, 0);
if (!t->queue_lock)
WARN_ON_ONCE(1);
return -1;
}
+ /* Find lcm() of optimal I/O size */
+ if (t->io_opt && b->io_opt)
+ t->io_opt = (t->io_opt * b->io_opt) / gcd(t->io_opt, b->io_opt);
+ else if (b->io_opt)
+ t->io_opt = b->io_opt;
+
+ /* Verify that optimal I/O size is a multiple of io_min */
+ if (t->io_min && t->io_opt % t->io_min)
+ return -1;
+
return 0;
}
EXPORT_SYMBOL(blk_stack_limits);
};
static ssize_t
-queue_var_show(unsigned int var, char *page)
+queue_var_show(unsigned long var, char *page)
{
- return sprintf(page, "%d\n", var);
+ return sprintf(page, "%lu\n", var);
}
static ssize_t
static ssize_t queue_ra_show(struct request_queue *q, char *page)
{
- int ra_kb = q->backing_dev_info.ra_pages << (PAGE_CACHE_SHIFT - 10);
+ unsigned long ra_kb = q->backing_dev_info.ra_pages <<
+ (PAGE_CACHE_SHIFT - 10);
return queue_var_show(ra_kb, (page));
}
return -EINVAL;
spin_lock_irq(q->queue_lock);
- blk_queue_max_sectors(q, max_sectors_kb << 1);
+ q->limits.max_sectors = max_sectors_kb << 1;
spin_unlock_irq(q->queue_lock);
return ret;
static ssize_t queue_rq_affinity_show(struct request_queue *q, char *page)
{
- unsigned int set = test_bit(QUEUE_FLAG_SAME_COMP, &q->queue_flags);
+ bool set = test_bit(QUEUE_FLAG_SAME_COMP, &q->queue_flags);
- return queue_var_show(set != 0, page);
+ return queue_var_show(set, page);
}
static ssize_t
return 0;
/*
- * Don't merge if failfast settings don't match
+ * Don't merge if failfast settings don't match.
+ *
+ * FIXME: The negation in front of each condition is necessary
+ * because bio and request flags use different bit positions
+ * and the accessors return those bits directly. This
+ * ugliness will soon go away.
*/
- if (bio_failfast_dev(bio) != blk_failfast_dev(rq) ||
- bio_failfast_transport(bio) != blk_failfast_transport(rq) ||
- bio_failfast_driver(bio) != blk_failfast_driver(rq))
+ if (!bio_failfast_dev(bio) != !blk_failfast_dev(rq) ||
+ !bio_failfast_transport(bio) != !blk_failfast_transport(rq) ||
+ !bio_failfast_driver(bio) != !blk_failfast_driver(rq))
return 0;
if (!elv_iosched_allow_merge(rq, bio))
config CRYPTO_FIPS
bool "FIPS 200 compliance"
+ depends on CRYPTO_ANSI_CPRNG
help
This options enables the fips boot option which is
required if you want to system to operate in a FIPS 200
certification. You should say no unless you know what
- this is.
+ this is. Note that CRYPTO_ANSI_CPRNG is requred if this
+ option is selected
config CRYPTO_ALGAPI
tristate
tristate "GCM/GMAC support"
select CRYPTO_CTR
select CRYPTO_AEAD
- select CRYPTO_GF128MUL
+ select CRYPTO_GHASH
help
Support for Galois/Counter Mode (GCM) and Galois Message
Authentication Code (GMAC). Required for IPSec.
http://csrc.nist.gov/encryption/modes/proposedmodes/
xcbc-mac/xcbc-mac-spec.pdf
+config CRYPTO_VMAC
+ tristate "VMAC support"
+ depends on EXPERIMENTAL
+ select CRYPTO_HASH
+ select CRYPTO_MANAGER
+ help
+ VMAC is a message authentication algorithm designed for
+ very high speed on 64-bit architectures.
+
+ See also:
+ <http://fastcrypto.org/vmac>
+
comment "Digest"
config CRYPTO_CRC32C
gain performance compared with software implementation.
Module will be crc32c-intel.
+config CRYPTO_GHASH
+ tristate "GHASH digest algorithm"
+ select CRYPTO_SHASH
+ select CRYPTO_GF128MUL
+ help
+ GHASH is message digest algorithm for GCM (Galois/Counter Mode).
+
config CRYPTO_MD4
tristate "MD4 digest algorithm"
select CRYPTO_HASH
config CRYPTO_ANSI_CPRNG
tristate "Pseudo Random Number Generation for Cryptographic modules"
+ default m
select CRYPTO_AES
select CRYPTO_RNG
- select CRYPTO_FIPS
help
This option enables the generic pseudo random number generator
for cryptographic modules. Uses the Algorithm specified in
- ANSI X9.31 A.2.4
+ ANSI X9.31 A.2.4. Not this option must be enabled if CRYPTO_FIPS
+ is selected
source "drivers/crypto/Kconfig"
#
obj-$(CONFIG_CRYPTO) += crypto.o
-crypto-objs := api.o cipher.o digest.o compress.o
+crypto-objs := api.o cipher.o compress.o
obj-$(CONFIG_CRYPTO_WORKQUEUE) += crypto_wq.o
obj-$(CONFIG_CRYPTO_BLKCIPHER2) += eseqiv.o
obj-$(CONFIG_CRYPTO_SEQIV) += seqiv.o
-crypto_hash-objs := hash.o
crypto_hash-objs += ahash.o
crypto_hash-objs += shash.o
obj-$(CONFIG_CRYPTO_HASH2) += crypto_hash.o
obj-$(CONFIG_CRYPTO_MANAGER2) += cryptomgr.o
obj-$(CONFIG_CRYPTO_HMAC) += hmac.o
+obj-$(CONFIG_CRYPTO_VMAC) += vmac.o
obj-$(CONFIG_CRYPTO_XCBC) += xcbc.o
obj-$(CONFIG_CRYPTO_NULL) += crypto_null.o
obj-$(CONFIG_CRYPTO_MD4) += md4.o
obj-$(CONFIG_CRYPTO_RNG2) += krng.o
obj-$(CONFIG_CRYPTO_ANSI_CPRNG) += ansi_cprng.o
obj-$(CONFIG_CRYPTO_TEST) += tcrypt.o
+obj-$(CONFIG_CRYPTO_GHASH) += ghash-generic.o
#
# generic algorithms and the async_tx api
*/
#include <crypto/internal/skcipher.h>
+#include <linux/cpumask.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include "internal.h"
+static const char *skcipher_default_geniv __read_mostly;
+
static int setkey_unaligned(struct crypto_ablkcipher *tfm, const u8 *key,
unsigned int keylen)
{
const char *crypto_default_geniv(const struct crypto_alg *alg)
{
- return alg->cra_flags & CRYPTO_ALG_ASYNC ? "eseqiv" : "chainiv";
+ if (((alg->cra_flags & CRYPTO_ALG_TYPE_MASK) ==
+ CRYPTO_ALG_TYPE_BLKCIPHER ? alg->cra_blkcipher.ivsize :
+ alg->cra_ablkcipher.ivsize) !=
+ alg->cra_blocksize)
+ return "chainiv";
+
+ return alg->cra_flags & CRYPTO_ALG_ASYNC ?
+ "eseqiv" : skcipher_default_geniv;
}
static int crypto_givcipher_default(struct crypto_alg *alg, u32 type, u32 mask)
int err;
larval = crypto_larval_lookup(alg->cra_driver_name,
+ (type & ~CRYPTO_ALG_TYPE_MASK) |
CRYPTO_ALG_TYPE_GIVCIPHER,
- CRYPTO_ALG_TYPE_MASK);
+ mask | CRYPTO_ALG_TYPE_MASK);
err = PTR_ERR(larval);
if (IS_ERR(larval))
goto out;
return ERR_PTR(err);
}
EXPORT_SYMBOL_GPL(crypto_alloc_ablkcipher);
+
+static int __init skcipher_module_init(void)
+{
+ skcipher_default_geniv = num_possible_cpus() > 1 ?
+ "eseqiv" : "chainiv";
+ return 0;
+}
+
+static void skcipher_module_exit(void)
+{
+}
+
+module_init(skcipher_module_init);
+module_exit(skcipher_module_exit);
ctx->key_enc[6 * i + 11] = t; \
} while (0)
-#define loop8(i) do { \
+#define loop8tophalf(i) do { \
t = ror32(t, 8); \
t = ls_box(t) ^ rco_tab[i]; \
t ^= ctx->key_enc[8 * i]; \
ctx->key_enc[8 * i + 10] = t; \
t ^= ctx->key_enc[8 * i + 3]; \
ctx->key_enc[8 * i + 11] = t; \
+} while (0)
+
+#define loop8(i) do { \
+ loop8tophalf(i); \
t = ctx->key_enc[8 * i + 4] ^ ls_box(t); \
ctx->key_enc[8 * i + 12] = t; \
t ^= ctx->key_enc[8 * i + 5]; \
ctx->key_enc[5] = le32_to_cpu(key[5]);
ctx->key_enc[6] = le32_to_cpu(key[6]);
t = ctx->key_enc[7] = le32_to_cpu(key[7]);
- for (i = 0; i < 7; ++i)
+ for (i = 0; i < 6; ++i)
loop8(i);
+ loop8tophalf(i);
break;
}
#include "internal.h"
+struct ahash_request_priv {
+ crypto_completion_t complete;
+ void *data;
+ u8 *result;
+ void *ubuf[] CRYPTO_MINALIGN_ATTR;
+};
+
+static inline struct ahash_alg *crypto_ahash_alg(struct crypto_ahash *hash)
+{
+ return container_of(crypto_hash_alg_common(hash), struct ahash_alg,
+ halg);
+}
+
static int hash_walk_next(struct crypto_hash_walk *walk)
{
unsigned int alignmask = walk->alignmask;
static int ahash_setkey_unaligned(struct crypto_ahash *tfm, const u8 *key,
unsigned int keylen)
{
- struct ahash_alg *ahash = crypto_ahash_alg(tfm);
unsigned long alignmask = crypto_ahash_alignmask(tfm);
int ret;
u8 *buffer, *alignbuffer;
unsigned long absize;
absize = keylen + alignmask;
- buffer = kmalloc(absize, GFP_ATOMIC);
+ buffer = kmalloc(absize, GFP_KERNEL);
if (!buffer)
return -ENOMEM;
alignbuffer = (u8 *)ALIGN((unsigned long)buffer, alignmask + 1);
memcpy(alignbuffer, key, keylen);
- ret = ahash->setkey(tfm, alignbuffer, keylen);
- memset(alignbuffer, 0, keylen);
- kfree(buffer);
+ ret = tfm->setkey(tfm, alignbuffer, keylen);
+ kzfree(buffer);
return ret;
}
-static int ahash_setkey(struct crypto_ahash *tfm, const u8 *key,
+int crypto_ahash_setkey(struct crypto_ahash *tfm, const u8 *key,
unsigned int keylen)
{
- struct ahash_alg *ahash = crypto_ahash_alg(tfm);
unsigned long alignmask = crypto_ahash_alignmask(tfm);
if ((unsigned long)key & alignmask)
return ahash_setkey_unaligned(tfm, key, keylen);
- return ahash->setkey(tfm, key, keylen);
+ return tfm->setkey(tfm, key, keylen);
}
+EXPORT_SYMBOL_GPL(crypto_ahash_setkey);
static int ahash_nosetkey(struct crypto_ahash *tfm, const u8 *key,
unsigned int keylen)
return -ENOSYS;
}
-int crypto_ahash_import(struct ahash_request *req, const u8 *in)
+static inline unsigned int ahash_align_buffer_size(unsigned len,
+ unsigned long mask)
+{
+ return len + (mask & ~(crypto_tfm_ctx_alignment() - 1));
+}
+
+static void ahash_op_unaligned_finish(struct ahash_request *req, int err)
+{
+ struct ahash_request_priv *priv = req->priv;
+
+ if (err == -EINPROGRESS)
+ return;
+
+ if (!err)
+ memcpy(priv->result, req->result,
+ crypto_ahash_digestsize(crypto_ahash_reqtfm(req)));
+
+ kzfree(priv);
+}
+
+static void ahash_op_unaligned_done(struct crypto_async_request *req, int err)
+{
+ struct ahash_request *areq = req->data;
+ struct ahash_request_priv *priv = areq->priv;
+ crypto_completion_t complete = priv->complete;
+ void *data = priv->data;
+
+ ahash_op_unaligned_finish(areq, err);
+
+ complete(data, err);
+}
+
+static int ahash_op_unaligned(struct ahash_request *req,
+ int (*op)(struct ahash_request *))
{
struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
- struct ahash_alg *alg = crypto_ahash_alg(tfm);
+ unsigned long alignmask = crypto_ahash_alignmask(tfm);
+ unsigned int ds = crypto_ahash_digestsize(tfm);
+ struct ahash_request_priv *priv;
+ int err;
+
+ priv = kmalloc(sizeof(*priv) + ahash_align_buffer_size(ds, alignmask),
+ (req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP) ?
+ GFP_KERNEL : GFP_ATOMIC);
+ if (!priv)
+ return -ENOMEM;
- memcpy(ahash_request_ctx(req), in, crypto_ahash_reqsize(tfm));
+ priv->result = req->result;
+ priv->complete = req->base.complete;
+ priv->data = req->base.data;
- if (alg->reinit)
- alg->reinit(req);
+ req->result = PTR_ALIGN((u8 *)priv->ubuf, alignmask + 1);
+ req->base.complete = ahash_op_unaligned_done;
+ req->base.data = req;
+ req->priv = priv;
- return 0;
+ err = op(req);
+ ahash_op_unaligned_finish(req, err);
+
+ return err;
}
-EXPORT_SYMBOL_GPL(crypto_ahash_import);
-static unsigned int crypto_ahash_ctxsize(struct crypto_alg *alg, u32 type,
- u32 mask)
+static int crypto_ahash_op(struct ahash_request *req,
+ int (*op)(struct ahash_request *))
{
- return alg->cra_ctxsize;
+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
+ unsigned long alignmask = crypto_ahash_alignmask(tfm);
+
+ if ((unsigned long)req->result & alignmask)
+ return ahash_op_unaligned(req, op);
+
+ return op(req);
}
-static int crypto_init_ahash_ops(struct crypto_tfm *tfm, u32 type, u32 mask)
+int crypto_ahash_final(struct ahash_request *req)
{
- struct ahash_alg *alg = &tfm->__crt_alg->cra_ahash;
- struct ahash_tfm *crt = &tfm->crt_ahash;
+ return crypto_ahash_op(req, crypto_ahash_reqtfm(req)->final);
+}
+EXPORT_SYMBOL_GPL(crypto_ahash_final);
- if (alg->digestsize > PAGE_SIZE / 8)
- return -EINVAL;
+int crypto_ahash_finup(struct ahash_request *req)
+{
+ return crypto_ahash_op(req, crypto_ahash_reqtfm(req)->finup);
+}
+EXPORT_SYMBOL_GPL(crypto_ahash_finup);
+
+int crypto_ahash_digest(struct ahash_request *req)
+{
+ return crypto_ahash_op(req, crypto_ahash_reqtfm(req)->digest);
+}
+EXPORT_SYMBOL_GPL(crypto_ahash_digest);
+
+static void ahash_def_finup_finish2(struct ahash_request *req, int err)
+{
+ struct ahash_request_priv *priv = req->priv;
+
+ if (err == -EINPROGRESS)
+ return;
+
+ if (!err)
+ memcpy(priv->result, req->result,
+ crypto_ahash_digestsize(crypto_ahash_reqtfm(req)));
- crt->init = alg->init;
- crt->update = alg->update;
- crt->final = alg->final;
- crt->digest = alg->digest;
- crt->setkey = alg->setkey ? ahash_setkey : ahash_nosetkey;
- crt->digestsize = alg->digestsize;
+ kzfree(priv);
+}
+
+static void ahash_def_finup_done2(struct crypto_async_request *req, int err)
+{
+ struct ahash_request *areq = req->data;
+ struct ahash_request_priv *priv = areq->priv;
+ crypto_completion_t complete = priv->complete;
+ void *data = priv->data;
+
+ ahash_def_finup_finish2(areq, err);
+
+ complete(data, err);
+}
+
+static int ahash_def_finup_finish1(struct ahash_request *req, int err)
+{
+ if (err)
+ goto out;
+
+ req->base.complete = ahash_def_finup_done2;
+ req->base.flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP;
+ err = crypto_ahash_reqtfm(req)->final(req);
+
+out:
+ ahash_def_finup_finish2(req, err);
+ return err;
+}
+
+static void ahash_def_finup_done1(struct crypto_async_request *req, int err)
+{
+ struct ahash_request *areq = req->data;
+ struct ahash_request_priv *priv = areq->priv;
+ crypto_completion_t complete = priv->complete;
+ void *data = priv->data;
+
+ err = ahash_def_finup_finish1(areq, err);
+
+ complete(data, err);
+}
+
+static int ahash_def_finup(struct ahash_request *req)
+{
+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
+ unsigned long alignmask = crypto_ahash_alignmask(tfm);
+ unsigned int ds = crypto_ahash_digestsize(tfm);
+ struct ahash_request_priv *priv;
+
+ priv = kmalloc(sizeof(*priv) + ahash_align_buffer_size(ds, alignmask),
+ (req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP) ?
+ GFP_KERNEL : GFP_ATOMIC);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->result = req->result;
+ priv->complete = req->base.complete;
+ priv->data = req->base.data;
+
+ req->result = PTR_ALIGN((u8 *)priv->ubuf, alignmask + 1);
+ req->base.complete = ahash_def_finup_done1;
+ req->base.data = req;
+ req->priv = priv;
+
+ return ahash_def_finup_finish1(req, tfm->update(req));
+}
+
+static int ahash_no_export(struct ahash_request *req, void *out)
+{
+ return -ENOSYS;
+}
+
+static int ahash_no_import(struct ahash_request *req, const void *in)
+{
+ return -ENOSYS;
+}
+
+static int crypto_ahash_init_tfm(struct crypto_tfm *tfm)
+{
+ struct crypto_ahash *hash = __crypto_ahash_cast(tfm);
+ struct ahash_alg *alg = crypto_ahash_alg(hash);
+
+ hash->setkey = ahash_nosetkey;
+ hash->export = ahash_no_export;
+ hash->import = ahash_no_import;
+
+ if (tfm->__crt_alg->cra_type != &crypto_ahash_type)
+ return crypto_init_shash_ops_async(tfm);
+
+ hash->init = alg->init;
+ hash->update = alg->update;
+ hash->final = alg->final;
+ hash->finup = alg->finup ?: ahash_def_finup;
+ hash->digest = alg->digest;
+
+ if (alg->setkey)
+ hash->setkey = alg->setkey;
+ if (alg->export)
+ hash->export = alg->export;
+ if (alg->import)
+ hash->import = alg->import;
return 0;
}
+static unsigned int crypto_ahash_extsize(struct crypto_alg *alg)
+{
+ if (alg->cra_type == &crypto_ahash_type)
+ return alg->cra_ctxsize;
+
+ return sizeof(struct crypto_shash *);
+}
+
static void crypto_ahash_show(struct seq_file *m, struct crypto_alg *alg)
__attribute__ ((unused));
static void crypto_ahash_show(struct seq_file *m, struct crypto_alg *alg)
seq_printf(m, "async : %s\n", alg->cra_flags & CRYPTO_ALG_ASYNC ?
"yes" : "no");
seq_printf(m, "blocksize : %u\n", alg->cra_blocksize);
- seq_printf(m, "digestsize : %u\n", alg->cra_ahash.digestsize);
+ seq_printf(m, "digestsize : %u\n",
+ __crypto_hash_alg_common(alg)->digestsize);
}
const struct crypto_type crypto_ahash_type = {
- .ctxsize = crypto_ahash_ctxsize,
- .init = crypto_init_ahash_ops,
+ .extsize = crypto_ahash_extsize,
+ .init_tfm = crypto_ahash_init_tfm,
#ifdef CONFIG_PROC_FS
.show = crypto_ahash_show,
#endif
+ .maskclear = ~CRYPTO_ALG_TYPE_MASK,
+ .maskset = CRYPTO_ALG_TYPE_AHASH_MASK,
+ .type = CRYPTO_ALG_TYPE_AHASH,
+ .tfmsize = offsetof(struct crypto_ahash, base),
};
EXPORT_SYMBOL_GPL(crypto_ahash_type);
+struct crypto_ahash *crypto_alloc_ahash(const char *alg_name, u32 type,
+ u32 mask)
+{
+ return crypto_alloc_tfm(alg_name, &crypto_ahash_type, type, mask);
+}
+EXPORT_SYMBOL_GPL(crypto_alloc_ahash);
+
+static int ahash_prepare_alg(struct ahash_alg *alg)
+{
+ struct crypto_alg *base = &alg->halg.base;
+
+ if (alg->halg.digestsize > PAGE_SIZE / 8 ||
+ alg->halg.statesize > PAGE_SIZE / 8)
+ return -EINVAL;
+
+ base->cra_type = &crypto_ahash_type;
+ base->cra_flags &= ~CRYPTO_ALG_TYPE_MASK;
+ base->cra_flags |= CRYPTO_ALG_TYPE_AHASH;
+
+ return 0;
+}
+
+int crypto_register_ahash(struct ahash_alg *alg)
+{
+ struct crypto_alg *base = &alg->halg.base;
+ int err;
+
+ err = ahash_prepare_alg(alg);
+ if (err)
+ return err;
+
+ return crypto_register_alg(base);
+}
+EXPORT_SYMBOL_GPL(crypto_register_ahash);
+
+int crypto_unregister_ahash(struct ahash_alg *alg)
+{
+ return crypto_unregister_alg(&alg->halg.base);
+}
+EXPORT_SYMBOL_GPL(crypto_unregister_ahash);
+
+int ahash_register_instance(struct crypto_template *tmpl,
+ struct ahash_instance *inst)
+{
+ int err;
+
+ err = ahash_prepare_alg(&inst->alg);
+ if (err)
+ return err;
+
+ return crypto_register_instance(tmpl, ahash_crypto_instance(inst));
+}
+EXPORT_SYMBOL_GPL(ahash_register_instance);
+
+void ahash_free_instance(struct crypto_instance *inst)
+{
+ crypto_drop_spawn(crypto_instance_ctx(inst));
+ kfree(ahash_instance(inst));
+}
+EXPORT_SYMBOL_GPL(ahash_free_instance);
+
+int crypto_init_ahash_spawn(struct crypto_ahash_spawn *spawn,
+ struct hash_alg_common *alg,
+ struct crypto_instance *inst)
+{
+ return crypto_init_spawn2(&spawn->base, &alg->base, inst,
+ &crypto_ahash_type);
+}
+EXPORT_SYMBOL_GPL(crypto_init_ahash_spawn);
+
+struct hash_alg_common *ahash_attr_alg(struct rtattr *rta, u32 type, u32 mask)
+{
+ struct crypto_alg *alg;
+
+ alg = crypto_attr_alg2(rta, &crypto_ahash_type, type, mask);
+ return IS_ERR(alg) ? ERR_CAST(alg) : __crypto_hash_alg_common(alg);
+}
+EXPORT_SYMBOL_GPL(ahash_attr_alg);
+
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Asynchronous cryptographic hash type");
crypto_tmpl_put(tmpl);
}
+static struct list_head *crypto_more_spawns(struct crypto_alg *alg,
+ struct list_head *stack,
+ struct list_head *top,
+ struct list_head *secondary_spawns)
+{
+ struct crypto_spawn *spawn, *n;
+
+ if (list_empty(stack))
+ return NULL;
+
+ spawn = list_first_entry(stack, struct crypto_spawn, list);
+ n = list_entry(spawn->list.next, struct crypto_spawn, list);
+
+ if (spawn->alg && &n->list != stack && !n->alg)
+ n->alg = (n->list.next == stack) ? alg :
+ &list_entry(n->list.next, struct crypto_spawn,
+ list)->inst->alg;
+
+ list_move(&spawn->list, secondary_spawns);
+
+ return &n->list == stack ? top : &n->inst->alg.cra_users;
+}
+
static void crypto_remove_spawn(struct crypto_spawn *spawn,
- struct list_head *list,
- struct list_head *secondary_spawns)
+ struct list_head *list)
{
struct crypto_instance *inst = spawn->inst;
struct crypto_template *tmpl = inst->tmpl;
- list_del_init(&spawn->list);
- spawn->alg = NULL;
-
if (crypto_is_dead(&inst->alg))
return;
hlist_del(&inst->list);
inst->alg.cra_destroy = crypto_destroy_instance;
- list_splice(&inst->alg.cra_users, secondary_spawns);
+ BUG_ON(!list_empty(&inst->alg.cra_users));
}
-static void crypto_remove_spawns(struct list_head *spawns,
- struct list_head *list, u32 new_type)
+static void crypto_remove_spawns(struct crypto_alg *alg,
+ struct list_head *list,
+ struct crypto_alg *nalg)
{
+ u32 new_type = (nalg ?: alg)->cra_flags;
struct crypto_spawn *spawn, *n;
LIST_HEAD(secondary_spawns);
+ struct list_head *spawns;
+ LIST_HEAD(stack);
+ LIST_HEAD(top);
+ spawns = &alg->cra_users;
list_for_each_entry_safe(spawn, n, spawns, list) {
if ((spawn->alg->cra_flags ^ new_type) & spawn->mask)
continue;
- crypto_remove_spawn(spawn, list, &secondary_spawns);
+ list_move(&spawn->list, &top);
}
- while (!list_empty(&secondary_spawns)) {
- list_for_each_entry_safe(spawn, n, &secondary_spawns, list)
- crypto_remove_spawn(spawn, list, &secondary_spawns);
+ spawns = ⊤
+ do {
+ while (!list_empty(spawns)) {
+ struct crypto_instance *inst;
+
+ spawn = list_first_entry(spawns, struct crypto_spawn,
+ list);
+ inst = spawn->inst;
+
+ BUG_ON(&inst->alg == alg);
+
+ list_move(&spawn->list, &stack);
+
+ if (&inst->alg == nalg)
+ break;
+
+ spawn->alg = NULL;
+ spawns = &inst->alg.cra_users;
+ }
+ } while ((spawns = crypto_more_spawns(alg, &stack, &top,
+ &secondary_spawns)));
+
+ list_for_each_entry_safe(spawn, n, &secondary_spawns, list) {
+ if (spawn->alg)
+ list_move(&spawn->list, &spawn->alg->cra_users);
+ else
+ crypto_remove_spawn(spawn, list);
}
}
q->cra_priority > alg->cra_priority)
continue;
- crypto_remove_spawns(&q->cra_users, &list, alg->cra_flags);
+ crypto_remove_spawns(q, &list, alg);
}
complete:
crypto_notify(CRYPTO_MSG_ALG_UNREGISTER, alg);
list_del_init(&alg->cra_list);
- crypto_remove_spawns(&alg->cra_users, list, alg->cra_flags);
+ crypto_remove_spawns(alg, list, NULL);
return 0;
}
}
EXPORT_SYMBOL_GPL(crypto_init_spawn);
+int crypto_init_spawn2(struct crypto_spawn *spawn, struct crypto_alg *alg,
+ struct crypto_instance *inst,
+ const struct crypto_type *frontend)
+{
+ int err = -EINVAL;
+
+ if (frontend && (alg->cra_flags ^ frontend->type) & frontend->maskset)
+ goto out;
+
+ spawn->frontend = frontend;
+ err = crypto_init_spawn(spawn, alg, inst, frontend->maskset);
+
+out:
+ return err;
+}
+EXPORT_SYMBOL_GPL(crypto_init_spawn2);
+
void crypto_drop_spawn(struct crypto_spawn *spawn)
{
+ if (!spawn->alg)
+ return;
+
down_write(&crypto_alg_sem);
list_del(&spawn->list);
up_write(&crypto_alg_sem);
}
EXPORT_SYMBOL_GPL(crypto_drop_spawn);
-struct crypto_tfm *crypto_spawn_tfm(struct crypto_spawn *spawn, u32 type,
- u32 mask)
+static struct crypto_alg *crypto_spawn_alg(struct crypto_spawn *spawn)
{
struct crypto_alg *alg;
struct crypto_alg *alg2;
- struct crypto_tfm *tfm;
down_read(&crypto_alg_sem);
alg = spawn->alg;
return ERR_PTR(-EAGAIN);
}
+ return alg;
+}
+
+struct crypto_tfm *crypto_spawn_tfm(struct crypto_spawn *spawn, u32 type,
+ u32 mask)
+{
+ struct crypto_alg *alg;
+ struct crypto_tfm *tfm;
+
+ alg = crypto_spawn_alg(spawn);
+ if (IS_ERR(alg))
+ return ERR_CAST(alg);
+
tfm = ERR_PTR(-EINVAL);
if (unlikely((alg->cra_flags ^ type) & mask))
goto out_put_alg;
}
EXPORT_SYMBOL_GPL(crypto_spawn_tfm);
+void *crypto_spawn_tfm2(struct crypto_spawn *spawn)
+{
+ struct crypto_alg *alg;
+ struct crypto_tfm *tfm;
+
+ alg = crypto_spawn_alg(spawn);
+ if (IS_ERR(alg))
+ return ERR_CAST(alg);
+
+ tfm = crypto_create_tfm(alg, spawn->frontend);
+ if (IS_ERR(tfm))
+ goto out_put_alg;
+
+ return tfm;
+
+out_put_alg:
+ crypto_mod_put(alg);
+ return tfm;
+}
+EXPORT_SYMBOL_GPL(crypto_spawn_tfm2);
+
int crypto_register_notifier(struct notifier_block *nb)
{
return blocking_notifier_chain_register(&crypto_chain, nb);
}
EXPORT_SYMBOL_GPL(crypto_attr_alg_name);
-struct crypto_alg *crypto_attr_alg(struct rtattr *rta, u32 type, u32 mask)
+struct crypto_alg *crypto_attr_alg2(struct rtattr *rta,
+ const struct crypto_type *frontend,
+ u32 type, u32 mask)
{
const char *name;
int err;
if (IS_ERR(name))
return ERR_PTR(err);
- return crypto_alg_mod_lookup(name, type, mask);
+ return crypto_find_alg(name, frontend, type, mask);
}
-EXPORT_SYMBOL_GPL(crypto_attr_alg);
+EXPORT_SYMBOL_GPL(crypto_attr_alg2);
int crypto_attr_u32(struct rtattr *rta, u32 *num)
{
}
EXPORT_SYMBOL_GPL(crypto_attr_u32);
-struct crypto_instance *crypto_alloc_instance(const char *name,
- struct crypto_alg *alg)
+void *crypto_alloc_instance2(const char *name, struct crypto_alg *alg,
+ unsigned int head)
{
struct crypto_instance *inst;
- struct crypto_spawn *spawn;
+ char *p;
int err;
- inst = kzalloc(sizeof(*inst) + sizeof(*spawn), GFP_KERNEL);
- if (!inst)
+ p = kzalloc(head + sizeof(*inst) + sizeof(struct crypto_spawn),
+ GFP_KERNEL);
+ if (!p)
return ERR_PTR(-ENOMEM);
+ inst = (void *)(p + head);
+
err = -ENAMETOOLONG;
if (snprintf(inst->alg.cra_name, CRYPTO_MAX_ALG_NAME, "%s(%s)", name,
alg->cra_name) >= CRYPTO_MAX_ALG_NAME)
name, alg->cra_driver_name) >= CRYPTO_MAX_ALG_NAME)
goto err_free_inst;
+ return p;
+
+err_free_inst:
+ kfree(p);
+ return ERR_PTR(err);
+}
+EXPORT_SYMBOL_GPL(crypto_alloc_instance2);
+
+struct crypto_instance *crypto_alloc_instance(const char *name,
+ struct crypto_alg *alg)
+{
+ struct crypto_instance *inst;
+ struct crypto_spawn *spawn;
+ int err;
+
+ inst = crypto_alloc_instance2(name, alg, 0);
+ if (IS_ERR(inst))
+ goto out;
+
spawn = crypto_instance_ctx(inst);
err = crypto_init_spawn(spawn, alg, inst,
CRYPTO_ALG_TYPE_MASK | CRYPTO_ALG_ASYNC);
err_free_inst:
kfree(inst);
- return ERR_PTR(err);
+ inst = ERR_PTR(err);
+
+out:
+ return inst;
}
EXPORT_SYMBOL_GPL(crypto_alloc_instance);
}
EXPORT_SYMBOL_GPL(crypto_enqueue_request);
-struct crypto_async_request *crypto_dequeue_request(struct crypto_queue *queue)
+void *__crypto_dequeue_request(struct crypto_queue *queue, unsigned int offset)
{
struct list_head *request;
request = queue->list.next;
list_del(request);
- return list_entry(request, struct crypto_async_request, list);
+ return (char *)list_entry(request, struct crypto_async_request, list) -
+ offset;
+}
+EXPORT_SYMBOL_GPL(__crypto_dequeue_request);
+
+struct crypto_async_request *crypto_dequeue_request(struct crypto_queue *queue)
+{
+ return __crypto_dequeue_request(queue, 0);
}
EXPORT_SYMBOL_GPL(crypto_dequeue_request);
goto err;
do {
+ if (tmpl->create) {
+ err = tmpl->create(tmpl, param->tb);
+ continue;
+ }
+
inst = tmpl->alloc(param->tb);
if (IS_ERR(inst))
err = PTR_ERR(inst);
/* Our exported functions */
static int get_prng_bytes(char *buf, size_t nbytes, struct prng_context *ctx)
{
- unsigned long flags;
unsigned char *ptr = buf;
unsigned int byte_count = (unsigned int)nbytes;
int err;
if (nbytes < 0)
return -EINVAL;
- spin_lock_irqsave(&ctx->prng_lock, flags);
+ spin_lock_bh(&ctx->prng_lock);
err = -EINVAL;
if (ctx->flags & PRNG_NEED_RESET)
goto remainder;
done:
- spin_unlock_irqrestore(&ctx->prng_lock, flags);
+ spin_unlock_bh(&ctx->prng_lock);
dbgprint(KERN_CRIT "returning %d from get_prng_bytes in context %p\n",
err, ctx);
return err;
unsigned char *V, unsigned char *DT)
{
int ret;
- int rc = -EINVAL;
unsigned char *prng_key;
- spin_lock(&ctx->prng_lock);
+ spin_lock_bh(&ctx->prng_lock);
ctx->flags |= PRNG_NEED_RESET;
prng_key = (key != NULL) ? key : (unsigned char *)DEFAULT_PRNG_KEY;
memset(ctx->rand_data, 0, DEFAULT_BLK_SZ);
memset(ctx->last_rand_data, 0, DEFAULT_BLK_SZ);
- if (ctx->tfm)
- crypto_free_cipher(ctx->tfm);
-
- ctx->tfm = crypto_alloc_cipher("aes", 0, 0);
- if (IS_ERR(ctx->tfm)) {
- dbgprint(KERN_CRIT "Failed to alloc tfm for context %p\n",
- ctx);
- ctx->tfm = NULL;
- goto out;
- }
-
ctx->rand_data_valid = DEFAULT_BLK_SZ;
ret = crypto_cipher_setkey(ctx->tfm, prng_key, klen);
if (ret) {
dbgprint(KERN_CRIT "PRNG: setkey() failed flags=%x\n",
crypto_cipher_get_flags(ctx->tfm));
- crypto_free_cipher(ctx->tfm);
goto out;
}
- rc = 0;
+ ret = 0;
ctx->flags &= ~PRNG_NEED_RESET;
out:
- spin_unlock(&ctx->prng_lock);
-
- return rc;
-
+ spin_unlock_bh(&ctx->prng_lock);
+ return ret;
}
static int cprng_init(struct crypto_tfm *tfm)
struct prng_context *ctx = crypto_tfm_ctx(tfm);
spin_lock_init(&ctx->prng_lock);
+ ctx->tfm = crypto_alloc_cipher("aes", 0, 0);
+ if (IS_ERR(ctx->tfm)) {
+ dbgprint(KERN_CRIT "Failed to alloc tfm for context %p\n",
+ ctx);
+ return PTR_ERR(ctx->tfm);
+ }
if (reset_prng_context(ctx, NULL, DEFAULT_PRNG_KSZ, NULL, NULL) < 0)
return -EINVAL;
/* Module initalization */
static int __init prng_mod_init(void)
{
- int ret = 0;
-
if (fips_enabled)
rng_alg.cra_priority += 200;
- ret = crypto_register_alg(&rng_alg);
-
- if (ret)
- goto out;
-out:
- return 0;
+ return crypto_register_alg(&rng_alg);
}
static void __exit prng_mod_fini(void)
switch (crypto_tfm_alg_type(tfm)) {
case CRYPTO_ALG_TYPE_CIPHER:
return crypto_init_cipher_ops(tfm);
-
- case CRYPTO_ALG_TYPE_DIGEST:
- if ((mask & CRYPTO_ALG_TYPE_HASH_MASK) !=
- CRYPTO_ALG_TYPE_HASH_MASK)
- return crypto_init_digest_ops_async(tfm);
- else
- return crypto_init_digest_ops(tfm);
case CRYPTO_ALG_TYPE_COMPRESS:
return crypto_init_compress_ops(tfm);
case CRYPTO_ALG_TYPE_CIPHER:
crypto_exit_cipher_ops(tfm);
break;
-
- case CRYPTO_ALG_TYPE_DIGEST:
- crypto_exit_digest_ops(tfm);
- break;
-
+
case CRYPTO_ALG_TYPE_COMPRESS:
crypto_exit_compress_ops(tfm);
break;
case CRYPTO_ALG_TYPE_CIPHER:
len += crypto_cipher_ctxsize(alg);
break;
-
- case CRYPTO_ALG_TYPE_DIGEST:
- len += crypto_digest_ctxsize(alg);
- break;
-
+
case CRYPTO_ALG_TYPE_COMPRESS:
len += crypto_compress_ctxsize(alg);
break;
int err = -ENOMEM;
tfmsize = frontend->tfmsize;
- total = tfmsize + sizeof(*tfm) + frontend->extsize(alg, frontend);
+ total = tfmsize + sizeof(*tfm) + frontend->extsize(alg);
mem = kzalloc(total, GFP_KERNEL);
if (mem == NULL)
tfm = (struct crypto_tfm *)(mem + tfmsize);
tfm->__crt_alg = alg;
- err = frontend->init_tfm(tfm, frontend);
+ err = frontend->init_tfm(tfm);
if (err)
goto out_free_tfm;
}
EXPORT_SYMBOL_GPL(crypto_create_tfm);
+struct crypto_alg *crypto_find_alg(const char *alg_name,
+ const struct crypto_type *frontend,
+ u32 type, u32 mask)
+{
+ struct crypto_alg *(*lookup)(const char *name, u32 type, u32 mask) =
+ crypto_alg_mod_lookup;
+
+ if (frontend) {
+ type &= frontend->maskclear;
+ mask &= frontend->maskclear;
+ type |= frontend->type;
+ mask |= frontend->maskset;
+
+ if (frontend->lookup)
+ lookup = frontend->lookup;
+ }
+
+ return lookup(alg_name, type, mask);
+}
+EXPORT_SYMBOL_GPL(crypto_find_alg);
+
/*
* crypto_alloc_tfm - Locate algorithm and allocate transform
* @alg_name: Name of algorithm
void *crypto_alloc_tfm(const char *alg_name,
const struct crypto_type *frontend, u32 type, u32 mask)
{
- struct crypto_alg *(*lookup)(const char *name, u32 type, u32 mask);
void *tfm;
int err;
- type &= frontend->maskclear;
- mask &= frontend->maskclear;
- type |= frontend->type;
- mask |= frontend->maskset;
-
- lookup = frontend->lookup ?: crypto_alg_mod_lookup;
-
for (;;) {
struct crypto_alg *alg;
- alg = lookup(alg_name, type, mask);
+ alg = crypto_find_alg(alg_name, frontend, type, mask);
if (IS_ERR(alg)) {
err = PTR_ERR(alg);
goto err;
static int __init async_xor_init(void)
{
- #ifdef CONFIG_DMA_ENGINE
+ #ifdef CONFIG_ASYNC_TX_DMA
/* To conserve stack space the input src_list (array of page pointers)
* is reused to hold the array of dma addresses passed to the driver.
* This conversion is only possible when dma_addr_t is less than the
#include <linux/slab.h>
#include <linux/spinlock.h>
+typedef u8 *(*authenc_ahash_t)(struct aead_request *req, unsigned int flags);
+
struct authenc_instance_ctx {
- struct crypto_spawn auth;
+ struct crypto_ahash_spawn auth;
struct crypto_skcipher_spawn enc;
};
struct crypto_authenc_ctx {
- spinlock_t auth_lock;
- struct crypto_hash *auth;
+ unsigned int reqoff;
+ struct crypto_ahash *auth;
struct crypto_ablkcipher *enc;
};
+struct authenc_request_ctx {
+ unsigned int cryptlen;
+ struct scatterlist *sg;
+ struct scatterlist asg[2];
+ struct scatterlist cipher[2];
+ crypto_completion_t complete;
+ crypto_completion_t update_complete;
+ char tail[];
+};
+
static int crypto_authenc_setkey(struct crypto_aead *authenc, const u8 *key,
unsigned int keylen)
{
unsigned int authkeylen;
unsigned int enckeylen;
struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc);
- struct crypto_hash *auth = ctx->auth;
+ struct crypto_ahash *auth = ctx->auth;
struct crypto_ablkcipher *enc = ctx->enc;
struct rtattr *rta = (void *)key;
struct crypto_authenc_key_param *param;
authkeylen = keylen - enckeylen;
- crypto_hash_clear_flags(auth, CRYPTO_TFM_REQ_MASK);
- crypto_hash_set_flags(auth, crypto_aead_get_flags(authenc) &
+ crypto_ahash_clear_flags(auth, CRYPTO_TFM_REQ_MASK);
+ crypto_ahash_set_flags(auth, crypto_aead_get_flags(authenc) &
CRYPTO_TFM_REQ_MASK);
- err = crypto_hash_setkey(auth, key, authkeylen);
- crypto_aead_set_flags(authenc, crypto_hash_get_flags(auth) &
+ err = crypto_ahash_setkey(auth, key, authkeylen);
+ crypto_aead_set_flags(authenc, crypto_ahash_get_flags(auth) &
CRYPTO_TFM_RES_MASK);
if (err)
sg_mark_end(head);
}
-static u8 *crypto_authenc_hash(struct aead_request *req, unsigned int flags,
- struct scatterlist *cipher,
- unsigned int cryptlen)
+static void authenc_geniv_ahash_update_done(struct crypto_async_request *areq,
+ int err)
+{
+ struct aead_request *req = areq->data;
+ struct crypto_aead *authenc = crypto_aead_reqtfm(req);
+ struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc);
+ struct authenc_request_ctx *areq_ctx = aead_request_ctx(req);
+ struct ahash_request *ahreq = (void *)(areq_ctx->tail + ctx->reqoff);
+
+ if (err)
+ goto out;
+
+ ahash_request_set_crypt(ahreq, areq_ctx->sg, ahreq->result,
+ areq_ctx->cryptlen);
+ ahash_request_set_callback(ahreq, aead_request_flags(req) &
+ CRYPTO_TFM_REQ_MAY_SLEEP,
+ areq_ctx->complete, req);
+
+ err = crypto_ahash_finup(ahreq);
+ if (err)
+ goto out;
+
+ scatterwalk_map_and_copy(ahreq->result, areq_ctx->sg,
+ areq_ctx->cryptlen,
+ crypto_aead_authsize(authenc), 1);
+
+out:
+ aead_request_complete(req, err);
+}
+
+static void authenc_geniv_ahash_done(struct crypto_async_request *areq, int err)
+{
+ struct aead_request *req = areq->data;
+ struct crypto_aead *authenc = crypto_aead_reqtfm(req);
+ struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc);
+ struct authenc_request_ctx *areq_ctx = aead_request_ctx(req);
+ struct ahash_request *ahreq = (void *)(areq_ctx->tail + ctx->reqoff);
+
+ if (err)
+ goto out;
+
+ scatterwalk_map_and_copy(ahreq->result, areq_ctx->sg,
+ areq_ctx->cryptlen,
+ crypto_aead_authsize(authenc), 1);
+
+out:
+ aead_request_complete(req, err);
+}
+
+static void authenc_verify_ahash_update_done(struct crypto_async_request *areq,
+ int err)
{
+ u8 *ihash;
+ unsigned int authsize;
+ struct ablkcipher_request *abreq;
+ struct aead_request *req = areq->data;
struct crypto_aead *authenc = crypto_aead_reqtfm(req);
struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc);
- struct crypto_hash *auth = ctx->auth;
- struct hash_desc desc = {
- .tfm = auth,
- .flags = aead_request_flags(req) & flags,
- };
- u8 *hash = aead_request_ctx(req);
+ struct authenc_request_ctx *areq_ctx = aead_request_ctx(req);
+ struct ahash_request *ahreq = (void *)(areq_ctx->tail + ctx->reqoff);
+
+ if (err)
+ goto out;
+
+ ahash_request_set_crypt(ahreq, areq_ctx->sg, ahreq->result,
+ areq_ctx->cryptlen);
+ ahash_request_set_callback(ahreq, aead_request_flags(req) &
+ CRYPTO_TFM_REQ_MAY_SLEEP,
+ areq_ctx->complete, req);
+
+ err = crypto_ahash_finup(ahreq);
+ if (err)
+ goto out;
+
+ authsize = crypto_aead_authsize(authenc);
+ ihash = ahreq->result + authsize;
+ scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen,
+ authsize, 0);
+
+ err = memcmp(ihash, ahreq->result, authsize) ? -EBADMSG: 0;
+ if (err)
+ goto out;
+
+ abreq = aead_request_ctx(req);
+ ablkcipher_request_set_tfm(abreq, ctx->enc);
+ ablkcipher_request_set_callback(abreq, aead_request_flags(req),
+ req->base.complete, req->base.data);
+ ablkcipher_request_set_crypt(abreq, req->src, req->dst,
+ req->cryptlen, req->iv);
+
+ err = crypto_ablkcipher_decrypt(abreq);
+
+out:
+ aead_request_complete(req, err);
+}
+
+static void authenc_verify_ahash_done(struct crypto_async_request *areq,
+ int err)
+{
+ u8 *ihash;
+ unsigned int authsize;
+ struct ablkcipher_request *abreq;
+ struct aead_request *req = areq->data;
+ struct crypto_aead *authenc = crypto_aead_reqtfm(req);
+ struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc);
+ struct authenc_request_ctx *areq_ctx = aead_request_ctx(req);
+ struct ahash_request *ahreq = (void *)(areq_ctx->tail + ctx->reqoff);
+
+ if (err)
+ goto out;
+
+ authsize = crypto_aead_authsize(authenc);
+ ihash = ahreq->result + authsize;
+ scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen,
+ authsize, 0);
+
+ err = memcmp(ihash, ahreq->result, authsize) ? -EBADMSG: 0;
+ if (err)
+ goto out;
+
+ abreq = aead_request_ctx(req);
+ ablkcipher_request_set_tfm(abreq, ctx->enc);
+ ablkcipher_request_set_callback(abreq, aead_request_flags(req),
+ req->base.complete, req->base.data);
+ ablkcipher_request_set_crypt(abreq, req->src, req->dst,
+ req->cryptlen, req->iv);
+
+ err = crypto_ablkcipher_decrypt(abreq);
+
+out:
+ aead_request_complete(req, err);
+}
+
+static u8 *crypto_authenc_ahash_fb(struct aead_request *req, unsigned int flags)
+{
+ struct crypto_aead *authenc = crypto_aead_reqtfm(req);
+ struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc);
+ struct crypto_ahash *auth = ctx->auth;
+ struct authenc_request_ctx *areq_ctx = aead_request_ctx(req);
+ struct ahash_request *ahreq = (void *)(areq_ctx->tail + ctx->reqoff);
+ u8 *hash = areq_ctx->tail;
int err;
- hash = (u8 *)ALIGN((unsigned long)hash + crypto_hash_alignmask(auth),
- crypto_hash_alignmask(auth) + 1);
+ hash = (u8 *)ALIGN((unsigned long)hash + crypto_ahash_alignmask(auth),
+ crypto_ahash_alignmask(auth) + 1);
+
+ ahash_request_set_tfm(ahreq, auth);
- spin_lock_bh(&ctx->auth_lock);
- err = crypto_hash_init(&desc);
+ err = crypto_ahash_init(ahreq);
if (err)
- goto auth_unlock;
+ return ERR_PTR(err);
+
+ ahash_request_set_crypt(ahreq, req->assoc, hash, req->assoclen);
+ ahash_request_set_callback(ahreq, aead_request_flags(req) & flags,
+ areq_ctx->update_complete, req);
- err = crypto_hash_update(&desc, req->assoc, req->assoclen);
+ err = crypto_ahash_update(ahreq);
if (err)
- goto auth_unlock;
+ return ERR_PTR(err);
+
+ ahash_request_set_crypt(ahreq, areq_ctx->sg, hash,
+ areq_ctx->cryptlen);
+ ahash_request_set_callback(ahreq, aead_request_flags(req) & flags,
+ areq_ctx->complete, req);
- err = crypto_hash_update(&desc, cipher, cryptlen);
+ err = crypto_ahash_finup(ahreq);
if (err)
- goto auth_unlock;
+ return ERR_PTR(err);
- err = crypto_hash_final(&desc, hash);
-auth_unlock:
- spin_unlock_bh(&ctx->auth_lock);
+ return hash;
+}
+
+static u8 *crypto_authenc_ahash(struct aead_request *req, unsigned int flags)
+{
+ struct crypto_aead *authenc = crypto_aead_reqtfm(req);
+ struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc);
+ struct crypto_ahash *auth = ctx->auth;
+ struct authenc_request_ctx *areq_ctx = aead_request_ctx(req);
+ struct ahash_request *ahreq = (void *)(areq_ctx->tail + ctx->reqoff);
+ u8 *hash = areq_ctx->tail;
+ int err;
+ hash = (u8 *)ALIGN((unsigned long)hash + crypto_ahash_alignmask(auth),
+ crypto_ahash_alignmask(auth) + 1);
+
+ ahash_request_set_tfm(ahreq, auth);
+ ahash_request_set_crypt(ahreq, areq_ctx->sg, hash,
+ areq_ctx->cryptlen);
+ ahash_request_set_callback(ahreq, aead_request_flags(req) & flags,
+ areq_ctx->complete, req);
+
+ err = crypto_ahash_digest(ahreq);
if (err)
return ERR_PTR(err);
unsigned int flags)
{
struct crypto_aead *authenc = crypto_aead_reqtfm(req);
+ struct authenc_request_ctx *areq_ctx = aead_request_ctx(req);
struct scatterlist *dst = req->dst;
- struct scatterlist cipher[2];
- struct page *dstp;
+ struct scatterlist *assoc = req->assoc;
+ struct scatterlist *cipher = areq_ctx->cipher;
+ struct scatterlist *asg = areq_ctx->asg;
unsigned int ivsize = crypto_aead_ivsize(authenc);
- unsigned int cryptlen;
+ unsigned int cryptlen = req->cryptlen;
+ authenc_ahash_t authenc_ahash_fn = crypto_authenc_ahash_fb;
+ struct page *dstp;
u8 *vdst;
u8 *hash;
sg_set_buf(cipher, iv, ivsize);
authenc_chain(cipher, dst, vdst == iv + ivsize);
dst = cipher;
+ cryptlen += ivsize;
}
- cryptlen = req->cryptlen + ivsize;
- hash = crypto_authenc_hash(req, flags, dst, cryptlen);
+ if (sg_is_last(assoc)) {
+ authenc_ahash_fn = crypto_authenc_ahash;
+ sg_init_table(asg, 2);
+ sg_set_page(asg, sg_page(assoc), assoc->length, assoc->offset);
+ authenc_chain(asg, dst, 0);
+ dst = asg;
+ cryptlen += req->assoclen;
+ }
+
+ areq_ctx->cryptlen = cryptlen;
+ areq_ctx->sg = dst;
+
+ areq_ctx->complete = authenc_geniv_ahash_done;
+ areq_ctx->update_complete = authenc_geniv_ahash_update_done;
+
+ hash = authenc_ahash_fn(req, flags);
if (IS_ERR(hash))
return PTR_ERR(hash);
}
static int crypto_authenc_verify(struct aead_request *req,
- struct scatterlist *cipher,
- unsigned int cryptlen)
+ authenc_ahash_t authenc_ahash_fn)
{
struct crypto_aead *authenc = crypto_aead_reqtfm(req);
+ struct authenc_request_ctx *areq_ctx = aead_request_ctx(req);
u8 *ohash;
u8 *ihash;
unsigned int authsize;
- ohash = crypto_authenc_hash(req, CRYPTO_TFM_REQ_MAY_SLEEP, cipher,
- cryptlen);
+ areq_ctx->complete = authenc_verify_ahash_done;
+ areq_ctx->complete = authenc_verify_ahash_update_done;
+
+ ohash = authenc_ahash_fn(req, CRYPTO_TFM_REQ_MAY_SLEEP);
if (IS_ERR(ohash))
return PTR_ERR(ohash);
authsize = crypto_aead_authsize(authenc);
ihash = ohash + authsize;
- scatterwalk_map_and_copy(ihash, cipher, cryptlen, authsize, 0);
+ scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen,
+ authsize, 0);
return memcmp(ihash, ohash, authsize) ? -EBADMSG: 0;
}
unsigned int cryptlen)
{
struct crypto_aead *authenc = crypto_aead_reqtfm(req);
+ struct authenc_request_ctx *areq_ctx = aead_request_ctx(req);
struct scatterlist *src = req->src;
- struct scatterlist cipher[2];
- struct page *srcp;
+ struct scatterlist *assoc = req->assoc;
+ struct scatterlist *cipher = areq_ctx->cipher;
+ struct scatterlist *asg = areq_ctx->asg;
unsigned int ivsize = crypto_aead_ivsize(authenc);
+ authenc_ahash_t authenc_ahash_fn = crypto_authenc_ahash_fb;
+ struct page *srcp;
u8 *vsrc;
srcp = sg_page(src);
sg_set_buf(cipher, iv, ivsize);
authenc_chain(cipher, src, vsrc == iv + ivsize);
src = cipher;
+ cryptlen += ivsize;
+ }
+
+ if (sg_is_last(assoc)) {
+ authenc_ahash_fn = crypto_authenc_ahash;
+ sg_init_table(asg, 2);
+ sg_set_page(asg, sg_page(assoc), assoc->length, assoc->offset);
+ authenc_chain(asg, src, 0);
+ src = asg;
+ cryptlen += req->assoclen;
}
- return crypto_authenc_verify(req, src, cryptlen + ivsize);
+ areq_ctx->cryptlen = cryptlen;
+ areq_ctx->sg = src;
+
+ return crypto_authenc_verify(req, authenc_ahash_fn);
}
static int crypto_authenc_decrypt(struct aead_request *req)
static int crypto_authenc_init_tfm(struct crypto_tfm *tfm)
{
- struct crypto_instance *inst = (void *)tfm->__crt_alg;
+ struct crypto_instance *inst = crypto_tfm_alg_instance(tfm);
struct authenc_instance_ctx *ictx = crypto_instance_ctx(inst);
struct crypto_authenc_ctx *ctx = crypto_tfm_ctx(tfm);
- struct crypto_hash *auth;
+ struct crypto_ahash *auth;
struct crypto_ablkcipher *enc;
int err;
- auth = crypto_spawn_hash(&ictx->auth);
+ auth = crypto_spawn_ahash(&ictx->auth);
if (IS_ERR(auth))
return PTR_ERR(auth);
+ ctx->reqoff = ALIGN(2 * crypto_ahash_digestsize(auth) +
+ crypto_ahash_alignmask(auth),
+ crypto_ahash_alignmask(auth) + 1);
+
enc = crypto_spawn_skcipher(&ictx->enc);
err = PTR_ERR(enc);
if (IS_ERR(enc))
- goto err_free_hash;
+ goto err_free_ahash;
ctx->auth = auth;
ctx->enc = enc;
+
tfm->crt_aead.reqsize = max_t(unsigned int,
- (crypto_hash_alignmask(auth) &
- ~(crypto_tfm_ctx_alignment() - 1)) +
- crypto_hash_digestsize(auth) * 2,
- sizeof(struct skcipher_givcrypt_request) +
- crypto_ablkcipher_reqsize(enc) +
- crypto_ablkcipher_ivsize(enc));
-
- spin_lock_init(&ctx->auth_lock);
+ crypto_ahash_reqsize(auth) + ctx->reqoff +
+ sizeof(struct authenc_request_ctx) +
+ sizeof(struct ahash_request),
+ sizeof(struct skcipher_givcrypt_request) +
+ crypto_ablkcipher_reqsize(enc) +
+ crypto_ablkcipher_ivsize(enc));
return 0;
-err_free_hash:
- crypto_free_hash(auth);
+err_free_ahash:
+ crypto_free_ahash(auth);
return err;
}
{
struct crypto_authenc_ctx *ctx = crypto_tfm_ctx(tfm);
- crypto_free_hash(ctx->auth);
+ crypto_free_ahash(ctx->auth);
crypto_free_ablkcipher(ctx->enc);
}
{
struct crypto_attr_type *algt;
struct crypto_instance *inst;
- struct crypto_alg *auth;
+ struct hash_alg_common *auth;
+ struct crypto_alg *auth_base;
struct crypto_alg *enc;
struct authenc_instance_ctx *ctx;
const char *enc_name;
if ((algt->type ^ CRYPTO_ALG_TYPE_AEAD) & algt->mask)
return ERR_PTR(-EINVAL);
- auth = crypto_attr_alg(tb[1], CRYPTO_ALG_TYPE_HASH,
- CRYPTO_ALG_TYPE_HASH_MASK);
+ auth = ahash_attr_alg(tb[1], CRYPTO_ALG_TYPE_HASH,
+ CRYPTO_ALG_TYPE_AHASH_MASK);
if (IS_ERR(auth))
return ERR_PTR(PTR_ERR(auth));
+ auth_base = &auth->base;
+
enc_name = crypto_attr_alg_name(tb[2]);
err = PTR_ERR(enc_name);
if (IS_ERR(enc_name))
ctx = crypto_instance_ctx(inst);
- err = crypto_init_spawn(&ctx->auth, auth, inst, CRYPTO_ALG_TYPE_MASK);
+ err = crypto_init_ahash_spawn(&ctx->auth, auth, inst);
if (err)
goto err_free_inst;
err = -ENAMETOOLONG;
if (snprintf(inst->alg.cra_name, CRYPTO_MAX_ALG_NAME,
- "authenc(%s,%s)", auth->cra_name, enc->cra_name) >=
+ "authenc(%s,%s)", auth_base->cra_name, enc->cra_name) >=
CRYPTO_MAX_ALG_NAME)
goto err_drop_enc;
if (snprintf(inst->alg.cra_driver_name, CRYPTO_MAX_ALG_NAME,
- "authenc(%s,%s)", auth->cra_driver_name,
+ "authenc(%s,%s)", auth_base->cra_driver_name,
enc->cra_driver_name) >= CRYPTO_MAX_ALG_NAME)
goto err_drop_enc;
inst->alg.cra_flags = CRYPTO_ALG_TYPE_AEAD;
inst->alg.cra_flags |= enc->cra_flags & CRYPTO_ALG_ASYNC;
- inst->alg.cra_priority = enc->cra_priority * 10 + auth->cra_priority;
+ inst->alg.cra_priority = enc->cra_priority *
+ 10 + auth_base->cra_priority;
inst->alg.cra_blocksize = enc->cra_blocksize;
- inst->alg.cra_alignmask = auth->cra_alignmask | enc->cra_alignmask;
+ inst->alg.cra_alignmask = auth_base->cra_alignmask | enc->cra_alignmask;
inst->alg.cra_type = &crypto_aead_type;
inst->alg.cra_aead.ivsize = enc->cra_ablkcipher.ivsize;
- inst->alg.cra_aead.maxauthsize = auth->cra_type == &crypto_hash_type ?
- auth->cra_hash.digestsize :
- auth->cra_type ?
- __crypto_shash_alg(auth)->digestsize :
- auth->cra_digest.dia_digestsize;
+ inst->alg.cra_aead.maxauthsize = auth->digestsize;
inst->alg.cra_ctxsize = sizeof(struct crypto_authenc_ctx);
inst->alg.cra_aead.givencrypt = crypto_authenc_givencrypt;
out:
- crypto_mod_put(auth);
+ crypto_mod_put(auth_base);
return inst;
err_drop_enc:
crypto_drop_skcipher(&ctx->enc);
err_drop_auth:
- crypto_drop_spawn(&ctx->auth);
+ crypto_drop_ahash(&ctx->auth);
err_free_inst:
kfree(inst);
out_put_auth:
struct authenc_instance_ctx *ctx = crypto_instance_ctx(inst);
crypto_drop_skcipher(&ctx->enc);
- crypto_drop_spawn(&ctx->auth);
+ crypto_drop_ahash(&ctx->auth);
kfree(inst);
}
struct cryptd_queue *queue;
};
+struct hashd_instance_ctx {
+ struct crypto_shash_spawn spawn;
+ struct cryptd_queue *queue;
+};
+
struct cryptd_blkcipher_ctx {
struct crypto_blkcipher *child;
};
};
struct cryptd_hash_ctx {
- struct crypto_hash *child;
+ struct crypto_shash *child;
};
struct cryptd_hash_request_ctx {
crypto_completion_t complete;
+ struct shash_desc desc;
};
static void cryptd_queue_worker(struct work_struct *work);
crypto_free_blkcipher(ctx->child);
}
-static struct crypto_instance *cryptd_alloc_instance(struct crypto_alg *alg,
- struct cryptd_queue *queue)
+static void *cryptd_alloc_instance(struct crypto_alg *alg, unsigned int head,
+ unsigned int tail)
{
+ char *p;
struct crypto_instance *inst;
- struct cryptd_instance_ctx *ctx;
int err;
- inst = kzalloc(sizeof(*inst) + sizeof(*ctx), GFP_KERNEL);
- if (!inst) {
- inst = ERR_PTR(-ENOMEM);
- goto out;
- }
+ p = kzalloc(head + sizeof(*inst) + tail, GFP_KERNEL);
+ if (!p)
+ return ERR_PTR(-ENOMEM);
+
+ inst = (void *)(p + head);
err = -ENAMETOOLONG;
if (snprintf(inst->alg.cra_driver_name, CRYPTO_MAX_ALG_NAME,
"cryptd(%s)", alg->cra_driver_name) >= CRYPTO_MAX_ALG_NAME)
goto out_free_inst;
- ctx = crypto_instance_ctx(inst);
- err = crypto_init_spawn(&ctx->spawn, alg, inst,
- CRYPTO_ALG_TYPE_MASK | CRYPTO_ALG_ASYNC);
- if (err)
- goto out_free_inst;
-
- ctx->queue = queue;
-
memcpy(inst->alg.cra_name, alg->cra_name, CRYPTO_MAX_ALG_NAME);
inst->alg.cra_priority = alg->cra_priority + 50;
inst->alg.cra_alignmask = alg->cra_alignmask;
out:
- return inst;
+ return p;
out_free_inst:
- kfree(inst);
- inst = ERR_PTR(err);
+ kfree(p);
+ p = ERR_PTR(err);
goto out;
}
-static struct crypto_instance *cryptd_alloc_blkcipher(
- struct rtattr **tb, struct cryptd_queue *queue)
+static int cryptd_create_blkcipher(struct crypto_template *tmpl,
+ struct rtattr **tb,
+ struct cryptd_queue *queue)
{
+ struct cryptd_instance_ctx *ctx;
struct crypto_instance *inst;
struct crypto_alg *alg;
+ int err;
alg = crypto_get_attr_alg(tb, CRYPTO_ALG_TYPE_BLKCIPHER,
CRYPTO_ALG_TYPE_MASK);
if (IS_ERR(alg))
- return ERR_CAST(alg);
+ return PTR_ERR(alg);
- inst = cryptd_alloc_instance(alg, queue);
+ inst = cryptd_alloc_instance(alg, 0, sizeof(*ctx));
+ err = PTR_ERR(inst);
if (IS_ERR(inst))
goto out_put_alg;
+ ctx = crypto_instance_ctx(inst);
+ ctx->queue = queue;
+
+ err = crypto_init_spawn(&ctx->spawn, alg, inst,
+ CRYPTO_ALG_TYPE_MASK | CRYPTO_ALG_ASYNC);
+ if (err)
+ goto out_free_inst;
+
inst->alg.cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC;
inst->alg.cra_type = &crypto_ablkcipher_type;
inst->alg.cra_ablkcipher.encrypt = cryptd_blkcipher_encrypt_enqueue;
inst->alg.cra_ablkcipher.decrypt = cryptd_blkcipher_decrypt_enqueue;
+ err = crypto_register_instance(tmpl, inst);
+ if (err) {
+ crypto_drop_spawn(&ctx->spawn);
+out_free_inst:
+ kfree(inst);
+ }
+
out_put_alg:
crypto_mod_put(alg);
- return inst;
+ return err;
}
static int cryptd_hash_init_tfm(struct crypto_tfm *tfm)
{
struct crypto_instance *inst = crypto_tfm_alg_instance(tfm);
- struct cryptd_instance_ctx *ictx = crypto_instance_ctx(inst);
- struct crypto_spawn *spawn = &ictx->spawn;
+ struct hashd_instance_ctx *ictx = crypto_instance_ctx(inst);
+ struct crypto_shash_spawn *spawn = &ictx->spawn;
struct cryptd_hash_ctx *ctx = crypto_tfm_ctx(tfm);
- struct crypto_hash *cipher;
+ struct crypto_shash *hash;
- cipher = crypto_spawn_hash(spawn);
- if (IS_ERR(cipher))
- return PTR_ERR(cipher);
+ hash = crypto_spawn_shash(spawn);
+ if (IS_ERR(hash))
+ return PTR_ERR(hash);
- ctx->child = cipher;
- tfm->crt_ahash.reqsize =
- sizeof(struct cryptd_hash_request_ctx);
+ ctx->child = hash;
+ crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm),
+ sizeof(struct cryptd_hash_request_ctx) +
+ crypto_shash_descsize(hash));
return 0;
}
{
struct cryptd_hash_ctx *ctx = crypto_tfm_ctx(tfm);
- crypto_free_hash(ctx->child);
+ crypto_free_shash(ctx->child);
}
static int cryptd_hash_setkey(struct crypto_ahash *parent,
const u8 *key, unsigned int keylen)
{
struct cryptd_hash_ctx *ctx = crypto_ahash_ctx(parent);
- struct crypto_hash *child = ctx->child;
+ struct crypto_shash *child = ctx->child;
int err;
- crypto_hash_clear_flags(child, CRYPTO_TFM_REQ_MASK);
- crypto_hash_set_flags(child, crypto_ahash_get_flags(parent) &
- CRYPTO_TFM_REQ_MASK);
- err = crypto_hash_setkey(child, key, keylen);
- crypto_ahash_set_flags(parent, crypto_hash_get_flags(child) &
- CRYPTO_TFM_RES_MASK);
+ crypto_shash_clear_flags(child, CRYPTO_TFM_REQ_MASK);
+ crypto_shash_set_flags(child, crypto_ahash_get_flags(parent) &
+ CRYPTO_TFM_REQ_MASK);
+ err = crypto_shash_setkey(child, key, keylen);
+ crypto_ahash_set_flags(parent, crypto_shash_get_flags(child) &
+ CRYPTO_TFM_RES_MASK);
return err;
}
static void cryptd_hash_init(struct crypto_async_request *req_async, int err)
{
- struct cryptd_hash_ctx *ctx = crypto_tfm_ctx(req_async->tfm);
- struct crypto_hash *child = ctx->child;
- struct ahash_request *req = ahash_request_cast(req_async);
- struct cryptd_hash_request_ctx *rctx;
- struct hash_desc desc;
-
- rctx = ahash_request_ctx(req);
+ struct cryptd_hash_ctx *ctx = crypto_tfm_ctx(req_async->tfm);
+ struct crypto_shash *child = ctx->child;
+ struct ahash_request *req = ahash_request_cast(req_async);
+ struct cryptd_hash_request_ctx *rctx = ahash_request_ctx(req);
+ struct shash_desc *desc = &rctx->desc;
if (unlikely(err == -EINPROGRESS))
goto out;
- desc.tfm = child;
- desc.flags = CRYPTO_TFM_REQ_MAY_SLEEP;
+ desc->tfm = child;
+ desc->flags = CRYPTO_TFM_REQ_MAY_SLEEP;
- err = crypto_hash_crt(child)->init(&desc);
+ err = crypto_shash_init(desc);
req->base.complete = rctx->complete;
static void cryptd_hash_update(struct crypto_async_request *req_async, int err)
{
- struct cryptd_hash_ctx *ctx = crypto_tfm_ctx(req_async->tfm);
- struct crypto_hash *child = ctx->child;
- struct ahash_request *req = ahash_request_cast(req_async);
+ struct ahash_request *req = ahash_request_cast(req_async);
struct cryptd_hash_request_ctx *rctx;
- struct hash_desc desc;
rctx = ahash_request_ctx(req);
if (unlikely(err == -EINPROGRESS))
goto out;
- desc.tfm = child;
- desc.flags = CRYPTO_TFM_REQ_MAY_SLEEP;
-
- err = crypto_hash_crt(child)->update(&desc,
- req->src,
- req->nbytes);
+ err = shash_ahash_update(req, &rctx->desc);
req->base.complete = rctx->complete;
static void cryptd_hash_final(struct crypto_async_request *req_async, int err)
{
- struct cryptd_hash_ctx *ctx = crypto_tfm_ctx(req_async->tfm);
- struct crypto_hash *child = ctx->child;
- struct ahash_request *req = ahash_request_cast(req_async);
- struct cryptd_hash_request_ctx *rctx;
- struct hash_desc desc;
-
- rctx = ahash_request_ctx(req);
+ struct ahash_request *req = ahash_request_cast(req_async);
+ struct cryptd_hash_request_ctx *rctx = ahash_request_ctx(req);
if (unlikely(err == -EINPROGRESS))
goto out;
- desc.tfm = child;
- desc.flags = CRYPTO_TFM_REQ_MAY_SLEEP;
-
- err = crypto_hash_crt(child)->final(&desc, req->result);
+ err = crypto_shash_final(&rctx->desc, req->result);
req->base.complete = rctx->complete;
return cryptd_hash_enqueue(req, cryptd_hash_final);
}
-static void cryptd_hash_digest(struct crypto_async_request *req_async, int err)
+static void cryptd_hash_finup(struct crypto_async_request *req_async, int err)
{
- struct cryptd_hash_ctx *ctx = crypto_tfm_ctx(req_async->tfm);
- struct crypto_hash *child = ctx->child;
- struct ahash_request *req = ahash_request_cast(req_async);
- struct cryptd_hash_request_ctx *rctx;
- struct hash_desc desc;
+ struct ahash_request *req = ahash_request_cast(req_async);
+ struct cryptd_hash_request_ctx *rctx = ahash_request_ctx(req);
- rctx = ahash_request_ctx(req);
+ if (unlikely(err == -EINPROGRESS))
+ goto out;
+
+ err = shash_ahash_finup(req, &rctx->desc);
+
+ req->base.complete = rctx->complete;
+
+out:
+ local_bh_disable();
+ rctx->complete(&req->base, err);
+ local_bh_enable();
+}
+
+static int cryptd_hash_finup_enqueue(struct ahash_request *req)
+{
+ return cryptd_hash_enqueue(req, cryptd_hash_finup);
+}
+
+static void cryptd_hash_digest(struct crypto_async_request *req_async, int err)
+{
+ struct cryptd_hash_ctx *ctx = crypto_tfm_ctx(req_async->tfm);
+ struct crypto_shash *child = ctx->child;
+ struct ahash_request *req = ahash_request_cast(req_async);
+ struct cryptd_hash_request_ctx *rctx = ahash_request_ctx(req);
+ struct shash_desc *desc = &rctx->desc;
if (unlikely(err == -EINPROGRESS))
goto out;
- desc.tfm = child;
- desc.flags = CRYPTO_TFM_REQ_MAY_SLEEP;
+ desc->tfm = child;
+ desc->flags = CRYPTO_TFM_REQ_MAY_SLEEP;
- err = crypto_hash_crt(child)->digest(&desc,
- req->src,
- req->nbytes,
- req->result);
+ err = shash_ahash_digest(req, desc);
req->base.complete = rctx->complete;
return cryptd_hash_enqueue(req, cryptd_hash_digest);
}
-static struct crypto_instance *cryptd_alloc_hash(
- struct rtattr **tb, struct cryptd_queue *queue)
+static int cryptd_hash_export(struct ahash_request *req, void *out)
{
- struct crypto_instance *inst;
+ struct cryptd_hash_request_ctx *rctx = ahash_request_ctx(req);
+
+ return crypto_shash_export(&rctx->desc, out);
+}
+
+static int cryptd_hash_import(struct ahash_request *req, const void *in)
+{
+ struct cryptd_hash_request_ctx *rctx = ahash_request_ctx(req);
+
+ return crypto_shash_import(&rctx->desc, in);
+}
+
+static int cryptd_create_hash(struct crypto_template *tmpl, struct rtattr **tb,
+ struct cryptd_queue *queue)
+{
+ struct hashd_instance_ctx *ctx;
+ struct ahash_instance *inst;
+ struct shash_alg *salg;
struct crypto_alg *alg;
+ int err;
- alg = crypto_get_attr_alg(tb, CRYPTO_ALG_TYPE_HASH,
- CRYPTO_ALG_TYPE_HASH_MASK);
- if (IS_ERR(alg))
- return ERR_PTR(PTR_ERR(alg));
+ salg = shash_attr_alg(tb[1], 0, 0);
+ if (IS_ERR(salg))
+ return PTR_ERR(salg);
- inst = cryptd_alloc_instance(alg, queue);
+ alg = &salg->base;
+ inst = cryptd_alloc_instance(alg, ahash_instance_headroom(),
+ sizeof(*ctx));
+ err = PTR_ERR(inst);
if (IS_ERR(inst))
goto out_put_alg;
- inst->alg.cra_flags = CRYPTO_ALG_TYPE_AHASH | CRYPTO_ALG_ASYNC;
- inst->alg.cra_type = &crypto_ahash_type;
+ ctx = ahash_instance_ctx(inst);
+ ctx->queue = queue;
- inst->alg.cra_ahash.digestsize = alg->cra_hash.digestsize;
- inst->alg.cra_ctxsize = sizeof(struct cryptd_hash_ctx);
+ err = crypto_init_shash_spawn(&ctx->spawn, salg,
+ ahash_crypto_instance(inst));
+ if (err)
+ goto out_free_inst;
- inst->alg.cra_init = cryptd_hash_init_tfm;
- inst->alg.cra_exit = cryptd_hash_exit_tfm;
+ inst->alg.halg.base.cra_flags = CRYPTO_ALG_ASYNC;
- inst->alg.cra_ahash.init = cryptd_hash_init_enqueue;
- inst->alg.cra_ahash.update = cryptd_hash_update_enqueue;
- inst->alg.cra_ahash.final = cryptd_hash_final_enqueue;
- inst->alg.cra_ahash.setkey = cryptd_hash_setkey;
- inst->alg.cra_ahash.digest = cryptd_hash_digest_enqueue;
+ inst->alg.halg.digestsize = salg->digestsize;
+ inst->alg.halg.base.cra_ctxsize = sizeof(struct cryptd_hash_ctx);
+
+ inst->alg.halg.base.cra_init = cryptd_hash_init_tfm;
+ inst->alg.halg.base.cra_exit = cryptd_hash_exit_tfm;
+
+ inst->alg.init = cryptd_hash_init_enqueue;
+ inst->alg.update = cryptd_hash_update_enqueue;
+ inst->alg.final = cryptd_hash_final_enqueue;
+ inst->alg.finup = cryptd_hash_finup_enqueue;
+ inst->alg.export = cryptd_hash_export;
+ inst->alg.import = cryptd_hash_import;
+ inst->alg.setkey = cryptd_hash_setkey;
+ inst->alg.digest = cryptd_hash_digest_enqueue;
+
+ err = ahash_register_instance(tmpl, inst);
+ if (err) {
+ crypto_drop_shash(&ctx->spawn);
+out_free_inst:
+ kfree(inst);
+ }
out_put_alg:
crypto_mod_put(alg);
- return inst;
+ return err;
}
static struct cryptd_queue queue;
-static struct crypto_instance *cryptd_alloc(struct rtattr **tb)
+static int cryptd_create(struct crypto_template *tmpl, struct rtattr **tb)
{
struct crypto_attr_type *algt;
algt = crypto_get_attr_type(tb);
if (IS_ERR(algt))
- return ERR_CAST(algt);
+ return PTR_ERR(algt);
switch (algt->type & algt->mask & CRYPTO_ALG_TYPE_MASK) {
case CRYPTO_ALG_TYPE_BLKCIPHER:
- return cryptd_alloc_blkcipher(tb, &queue);
+ return cryptd_create_blkcipher(tmpl, tb, &queue);
case CRYPTO_ALG_TYPE_DIGEST:
- return cryptd_alloc_hash(tb, &queue);
+ return cryptd_create_hash(tmpl, tb, &queue);
}
- return ERR_PTR(-EINVAL);
+ return -EINVAL;
}
static void cryptd_free(struct crypto_instance *inst)
{
struct cryptd_instance_ctx *ctx = crypto_instance_ctx(inst);
+ struct hashd_instance_ctx *hctx = crypto_instance_ctx(inst);
+
+ switch (inst->alg.cra_flags & CRYPTO_ALG_TYPE_MASK) {
+ case CRYPTO_ALG_TYPE_AHASH:
+ crypto_drop_shash(&hctx->spawn);
+ kfree(ahash_instance(inst));
+ return;
+ }
crypto_drop_spawn(&ctx->spawn);
kfree(inst);
static struct crypto_template cryptd_tmpl = {
.name = "cryptd",
- .alloc = cryptd_alloc,
+ .create = cryptd_create,
.free = cryptd_free,
.module = THIS_MODULE,
};
}
EXPORT_SYMBOL_GPL(cryptd_free_ablkcipher);
+struct cryptd_ahash *cryptd_alloc_ahash(const char *alg_name,
+ u32 type, u32 mask)
+{
+ char cryptd_alg_name[CRYPTO_MAX_ALG_NAME];
+ struct crypto_ahash *tfm;
+
+ if (snprintf(cryptd_alg_name, CRYPTO_MAX_ALG_NAME,
+ "cryptd(%s)", alg_name) >= CRYPTO_MAX_ALG_NAME)
+ return ERR_PTR(-EINVAL);
+ tfm = crypto_alloc_ahash(cryptd_alg_name, type, mask);
+ if (IS_ERR(tfm))
+ return ERR_CAST(tfm);
+ if (tfm->base.__crt_alg->cra_module != THIS_MODULE) {
+ crypto_free_ahash(tfm);
+ return ERR_PTR(-EINVAL);
+ }
+
+ return __cryptd_ahash_cast(tfm);
+}
+EXPORT_SYMBOL_GPL(cryptd_alloc_ahash);
+
+struct crypto_shash *cryptd_ahash_child(struct cryptd_ahash *tfm)
+{
+ struct cryptd_hash_ctx *ctx = crypto_ahash_ctx(&tfm->base);
+
+ return ctx->child;
+}
+EXPORT_SYMBOL_GPL(cryptd_ahash_child);
+
+void cryptd_free_ahash(struct cryptd_ahash *tfm)
+{
+ crypto_free_ahash(&tfm->base);
+}
+EXPORT_SYMBOL_GPL(cryptd_free_ahash);
+
static int __init cryptd_init(void)
{
int err;
inst->alg.cra_blkcipher.encrypt = crypto_ctr_crypt;
inst->alg.cra_blkcipher.decrypt = crypto_ctr_crypt;
+ inst->alg.cra_blkcipher.geniv = "chainiv";
+
out:
crypto_mod_put(alg);
return inst;
#include <crypto/gf128mul.h>
#include <crypto/internal/aead.h>
#include <crypto/internal/skcipher.h>
+#include <crypto/internal/hash.h>
#include <crypto/scatterwalk.h>
+#include <crypto/hash.h>
+#include "internal.h"
#include <linux/completion.h>
#include <linux/err.h>
#include <linux/init.h>
struct gcm_instance_ctx {
struct crypto_skcipher_spawn ctr;
+ struct crypto_ahash_spawn ghash;
};
struct crypto_gcm_ctx {
struct crypto_ablkcipher *ctr;
- struct gf128mul_4k *gf128;
+ struct crypto_ahash *ghash;
};
struct crypto_rfc4106_ctx {
};
struct crypto_gcm_ghash_ctx {
- u32 bytes;
- u32 flags;
- struct gf128mul_4k *gf128;
- u8 buffer[16];
+ unsigned int cryptlen;
+ struct scatterlist *src;
+ crypto_completion_t complete;
};
struct crypto_gcm_req_priv_ctx {
u8 iauth_tag[16];
struct scatterlist src[2];
struct scatterlist dst[2];
- struct crypto_gcm_ghash_ctx ghash;
- struct ablkcipher_request abreq;
+ struct crypto_gcm_ghash_ctx ghash_ctx;
+ union {
+ struct ahash_request ahreq;
+ struct ablkcipher_request abreq;
+ } u;
};
struct crypto_gcm_setkey_result {
struct completion completion;
};
+static void *gcm_zeroes;
+
static inline struct crypto_gcm_req_priv_ctx *crypto_gcm_reqctx(
struct aead_request *req)
{
return (void *)PTR_ALIGN((u8 *)aead_request_ctx(req), align + 1);
}
-static void crypto_gcm_ghash_init(struct crypto_gcm_ghash_ctx *ctx, u32 flags,
- struct gf128mul_4k *gf128)
-{
- ctx->bytes = 0;
- ctx->flags = flags;
- ctx->gf128 = gf128;
- memset(ctx->buffer, 0, 16);
-}
-
-static void crypto_gcm_ghash_update(struct crypto_gcm_ghash_ctx *ctx,
- const u8 *src, unsigned int srclen)
-{
- u8 *dst = ctx->buffer;
-
- if (ctx->bytes) {
- int n = min(srclen, ctx->bytes);
- u8 *pos = dst + (16 - ctx->bytes);
-
- ctx->bytes -= n;
- srclen -= n;
-
- while (n--)
- *pos++ ^= *src++;
-
- if (!ctx->bytes)
- gf128mul_4k_lle((be128 *)dst, ctx->gf128);
- }
-
- while (srclen >= 16) {
- crypto_xor(dst, src, 16);
- gf128mul_4k_lle((be128 *)dst, ctx->gf128);
- src += 16;
- srclen -= 16;
- }
-
- if (srclen) {
- ctx->bytes = 16 - srclen;
- while (srclen--)
- *dst++ ^= *src++;
- }
-}
-
-static void crypto_gcm_ghash_update_sg(struct crypto_gcm_ghash_ctx *ctx,
- struct scatterlist *sg, int len)
-{
- struct scatter_walk walk;
- u8 *src;
- int n;
-
- if (!len)
- return;
-
- scatterwalk_start(&walk, sg);
-
- while (len) {
- n = scatterwalk_clamp(&walk, len);
-
- if (!n) {
- scatterwalk_start(&walk, scatterwalk_sg_next(walk.sg));
- n = scatterwalk_clamp(&walk, len);
- }
-
- src = scatterwalk_map(&walk, 0);
-
- crypto_gcm_ghash_update(ctx, src, n);
- len -= n;
-
- scatterwalk_unmap(src, 0);
- scatterwalk_advance(&walk, n);
- scatterwalk_done(&walk, 0, len);
- if (len)
- crypto_yield(ctx->flags);
- }
-}
-
-static void crypto_gcm_ghash_flush(struct crypto_gcm_ghash_ctx *ctx)
-{
- u8 *dst = ctx->buffer;
-
- if (ctx->bytes) {
- u8 *tmp = dst + (16 - ctx->bytes);
-
- while (ctx->bytes--)
- *tmp++ ^= 0;
-
- gf128mul_4k_lle((be128 *)dst, ctx->gf128);
- }
-
- ctx->bytes = 0;
-}
-
-static void crypto_gcm_ghash_final_xor(struct crypto_gcm_ghash_ctx *ctx,
- unsigned int authlen,
- unsigned int cryptlen, u8 *dst)
-{
- u8 *buf = ctx->buffer;
- u128 lengths;
-
- lengths.a = cpu_to_be64(authlen * 8);
- lengths.b = cpu_to_be64(cryptlen * 8);
-
- crypto_gcm_ghash_flush(ctx);
- crypto_xor(buf, (u8 *)&lengths, 16);
- gf128mul_4k_lle((be128 *)buf, ctx->gf128);
- crypto_xor(dst, buf, 16);
-}
-
static void crypto_gcm_setkey_done(struct crypto_async_request *req, int err)
{
struct crypto_gcm_setkey_result *result = req->data;
unsigned int keylen)
{
struct crypto_gcm_ctx *ctx = crypto_aead_ctx(aead);
+ struct crypto_ahash *ghash = ctx->ghash;
struct crypto_ablkcipher *ctr = ctx->ctr;
struct {
be128 hash;
if (err)
goto out;
- if (ctx->gf128 != NULL)
- gf128mul_free_4k(ctx->gf128);
-
- ctx->gf128 = gf128mul_init_4k_lle(&data->hash);
-
- if (ctx->gf128 == NULL)
- err = -ENOMEM;
+ crypto_ahash_clear_flags(ghash, CRYPTO_TFM_REQ_MASK);
+ crypto_ahash_set_flags(ghash, crypto_aead_get_flags(aead) &
+ CRYPTO_TFM_REQ_MASK);
+ err = crypto_ahash_setkey(ghash, (u8 *)&data->hash, sizeof(be128));
+ crypto_aead_set_flags(aead, crypto_ahash_get_flags(ghash) &
+ CRYPTO_TFM_RES_MASK);
out:
kfree(data);
struct crypto_aead *aead = crypto_aead_reqtfm(req);
struct crypto_gcm_ctx *ctx = crypto_aead_ctx(aead);
struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
- u32 flags = req->base.tfm->crt_flags;
- struct crypto_gcm_ghash_ctx *ghash = &pctx->ghash;
struct scatterlist *dst;
__be32 counter = cpu_to_be32(1);
ablkcipher_request_set_crypt(ablk_req, pctx->src, dst,
cryptlen + sizeof(pctx->auth_tag),
req->iv);
+}
+
+static inline unsigned int gcm_remain(unsigned int len)
+{
+ len &= 0xfU;
+ return len ? 16 - len : 0;
+}
+
+static void gcm_hash_len_done(struct crypto_async_request *areq, int err);
+static void gcm_hash_final_done(struct crypto_async_request *areq, int err);
- crypto_gcm_ghash_init(ghash, flags, ctx->gf128);
+static int gcm_hash_update(struct aead_request *req,
+ struct crypto_gcm_req_priv_ctx *pctx,
+ crypto_completion_t complete,
+ struct scatterlist *src,
+ unsigned int len)
+{
+ struct ahash_request *ahreq = &pctx->u.ahreq;
- crypto_gcm_ghash_update_sg(ghash, req->assoc, req->assoclen);
- crypto_gcm_ghash_flush(ghash);
+ ahash_request_set_callback(ahreq, aead_request_flags(req),
+ complete, req);
+ ahash_request_set_crypt(ahreq, src, NULL, len);
+
+ return crypto_ahash_update(ahreq);
}
-static int crypto_gcm_hash(struct aead_request *req)
+static int gcm_hash_remain(struct aead_request *req,
+ struct crypto_gcm_req_priv_ctx *pctx,
+ unsigned int remain,
+ crypto_completion_t complete)
{
- struct crypto_aead *aead = crypto_aead_reqtfm(req);
+ struct ahash_request *ahreq = &pctx->u.ahreq;
+
+ ahash_request_set_callback(ahreq, aead_request_flags(req),
+ complete, req);
+ sg_init_one(pctx->src, gcm_zeroes, remain);
+ ahash_request_set_crypt(ahreq, pctx->src, NULL, remain);
+
+ return crypto_ahash_update(ahreq);
+}
+
+static int gcm_hash_len(struct aead_request *req,
+ struct crypto_gcm_req_priv_ctx *pctx)
+{
+ struct ahash_request *ahreq = &pctx->u.ahreq;
+ struct crypto_gcm_ghash_ctx *gctx = &pctx->ghash_ctx;
+ u128 lengths;
+
+ lengths.a = cpu_to_be64(req->assoclen * 8);
+ lengths.b = cpu_to_be64(gctx->cryptlen * 8);
+ memcpy(pctx->iauth_tag, &lengths, 16);
+ sg_init_one(pctx->src, pctx->iauth_tag, 16);
+ ahash_request_set_callback(ahreq, aead_request_flags(req),
+ gcm_hash_len_done, req);
+ ahash_request_set_crypt(ahreq, pctx->src,
+ NULL, sizeof(lengths));
+
+ return crypto_ahash_update(ahreq);
+}
+
+static int gcm_hash_final(struct aead_request *req,
+ struct crypto_gcm_req_priv_ctx *pctx)
+{
+ struct ahash_request *ahreq = &pctx->u.ahreq;
+
+ ahash_request_set_callback(ahreq, aead_request_flags(req),
+ gcm_hash_final_done, req);
+ ahash_request_set_crypt(ahreq, NULL, pctx->iauth_tag, 0);
+
+ return crypto_ahash_final(ahreq);
+}
+
+static void gcm_hash_final_done(struct crypto_async_request *areq,
+ int err)
+{
+ struct aead_request *req = areq->data;
struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
- u8 *auth_tag = pctx->auth_tag;
- struct crypto_gcm_ghash_ctx *ghash = &pctx->ghash;
+ struct crypto_gcm_ghash_ctx *gctx = &pctx->ghash_ctx;
+
+ if (!err)
+ crypto_xor(pctx->auth_tag, pctx->iauth_tag, 16);
- crypto_gcm_ghash_update_sg(ghash, req->dst, req->cryptlen);
- crypto_gcm_ghash_final_xor(ghash, req->assoclen, req->cryptlen,
- auth_tag);
+ gctx->complete(areq, err);
+}
+
+static void gcm_hash_len_done(struct crypto_async_request *areq,
+ int err)
+{
+ struct aead_request *req = areq->data;
+ struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
+
+ if (!err) {
+ err = gcm_hash_final(req, pctx);
+ if (err == -EINPROGRESS || err == -EBUSY)
+ return;
+ }
+
+ gcm_hash_final_done(areq, err);
+}
+
+static void gcm_hash_crypt_remain_done(struct crypto_async_request *areq,
+ int err)
+{
+ struct aead_request *req = areq->data;
+ struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
+
+ if (!err) {
+ err = gcm_hash_len(req, pctx);
+ if (err == -EINPROGRESS || err == -EBUSY)
+ return;
+ }
+
+ gcm_hash_len_done(areq, err);
+}
+
+static void gcm_hash_crypt_done(struct crypto_async_request *areq,
+ int err)
+{
+ struct aead_request *req = areq->data;
+ struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
+ struct crypto_gcm_ghash_ctx *gctx = &pctx->ghash_ctx;
+ unsigned int remain;
+
+ if (!err) {
+ remain = gcm_remain(gctx->cryptlen);
+ BUG_ON(!remain);
+ err = gcm_hash_remain(req, pctx, remain,
+ gcm_hash_crypt_remain_done);
+ if (err == -EINPROGRESS || err == -EBUSY)
+ return;
+ }
+
+ gcm_hash_crypt_remain_done(areq, err);
+}
+
+static void gcm_hash_assoc_remain_done(struct crypto_async_request *areq,
+ int err)
+{
+ struct aead_request *req = areq->data;
+ struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
+ struct crypto_gcm_ghash_ctx *gctx = &pctx->ghash_ctx;
+ crypto_completion_t complete;
+ unsigned int remain = 0;
+
+ if (!err && gctx->cryptlen) {
+ remain = gcm_remain(gctx->cryptlen);
+ complete = remain ? gcm_hash_crypt_done :
+ gcm_hash_crypt_remain_done;
+ err = gcm_hash_update(req, pctx, complete,
+ gctx->src, gctx->cryptlen);
+ if (err == -EINPROGRESS || err == -EBUSY)
+ return;
+ }
+
+ if (remain)
+ gcm_hash_crypt_done(areq, err);
+ else
+ gcm_hash_crypt_remain_done(areq, err);
+}
+
+static void gcm_hash_assoc_done(struct crypto_async_request *areq,
+ int err)
+{
+ struct aead_request *req = areq->data;
+ struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
+ unsigned int remain;
+
+ if (!err) {
+ remain = gcm_remain(req->assoclen);
+ BUG_ON(!remain);
+ err = gcm_hash_remain(req, pctx, remain,
+ gcm_hash_assoc_remain_done);
+ if (err == -EINPROGRESS || err == -EBUSY)
+ return;
+ }
+
+ gcm_hash_assoc_remain_done(areq, err);
+}
+
+static void gcm_hash_init_done(struct crypto_async_request *areq,
+ int err)
+{
+ struct aead_request *req = areq->data;
+ struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
+ crypto_completion_t complete;
+ unsigned int remain = 0;
+
+ if (!err && req->assoclen) {
+ remain = gcm_remain(req->assoclen);
+ complete = remain ? gcm_hash_assoc_done :
+ gcm_hash_assoc_remain_done;
+ err = gcm_hash_update(req, pctx, complete,
+ req->assoc, req->assoclen);
+ if (err == -EINPROGRESS || err == -EBUSY)
+ return;
+ }
+
+ if (remain)
+ gcm_hash_assoc_done(areq, err);
+ else
+ gcm_hash_assoc_remain_done(areq, err);
+}
+
+static int gcm_hash(struct aead_request *req,
+ struct crypto_gcm_req_priv_ctx *pctx)
+{
+ struct ahash_request *ahreq = &pctx->u.ahreq;
+ struct crypto_gcm_ghash_ctx *gctx = &pctx->ghash_ctx;
+ struct crypto_gcm_ctx *ctx = crypto_tfm_ctx(req->base.tfm);
+ unsigned int remain;
+ crypto_completion_t complete;
+ int err;
+
+ ahash_request_set_tfm(ahreq, ctx->ghash);
+
+ ahash_request_set_callback(ahreq, aead_request_flags(req),
+ gcm_hash_init_done, req);
+ err = crypto_ahash_init(ahreq);
+ if (err)
+ return err;
+ remain = gcm_remain(req->assoclen);
+ complete = remain ? gcm_hash_assoc_done : gcm_hash_assoc_remain_done;
+ err = gcm_hash_update(req, pctx, complete, req->assoc, req->assoclen);
+ if (err)
+ return err;
+ if (remain) {
+ err = gcm_hash_remain(req, pctx, remain,
+ gcm_hash_assoc_remain_done);
+ if (err)
+ return err;
+ }
+ remain = gcm_remain(gctx->cryptlen);
+ complete = remain ? gcm_hash_crypt_done : gcm_hash_crypt_remain_done;
+ err = gcm_hash_update(req, pctx, complete, gctx->src, gctx->cryptlen);
+ if (err)
+ return err;
+ if (remain) {
+ err = gcm_hash_remain(req, pctx, remain,
+ gcm_hash_crypt_remain_done);
+ if (err)
+ return err;
+ }
+ err = gcm_hash_len(req, pctx);
+ if (err)
+ return err;
+ err = gcm_hash_final(req, pctx);
+ if (err)
+ return err;
+
+ return 0;
+}
+
+static void gcm_enc_copy_hash(struct aead_request *req,
+ struct crypto_gcm_req_priv_ctx *pctx)
+{
+ struct crypto_aead *aead = crypto_aead_reqtfm(req);
+ u8 *auth_tag = pctx->auth_tag;
scatterwalk_map_and_copy(auth_tag, req->dst, req->cryptlen,
crypto_aead_authsize(aead), 1);
- return 0;
}
-static void crypto_gcm_encrypt_done(struct crypto_async_request *areq, int err)
+static void gcm_enc_hash_done(struct crypto_async_request *areq,
+ int err)
{
struct aead_request *req = areq->data;
+ struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
if (!err)
- err = crypto_gcm_hash(req);
+ gcm_enc_copy_hash(req, pctx);
aead_request_complete(req, err);
}
+static void gcm_encrypt_done(struct crypto_async_request *areq,
+ int err)
+{
+ struct aead_request *req = areq->data;
+ struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
+
+ if (!err) {
+ err = gcm_hash(req, pctx);
+ if (err == -EINPROGRESS || err == -EBUSY)
+ return;
+ }
+
+ gcm_enc_hash_done(areq, err);
+}
+
static int crypto_gcm_encrypt(struct aead_request *req)
{
struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
- struct ablkcipher_request *abreq = &pctx->abreq;
+ struct ablkcipher_request *abreq = &pctx->u.abreq;
+ struct crypto_gcm_ghash_ctx *gctx = &pctx->ghash_ctx;
int err;
crypto_gcm_init_crypt(abreq, req, req->cryptlen);
ablkcipher_request_set_callback(abreq, aead_request_flags(req),
- crypto_gcm_encrypt_done, req);
+ gcm_encrypt_done, req);
+
+ gctx->src = req->dst;
+ gctx->cryptlen = req->cryptlen;
+ gctx->complete = gcm_enc_hash_done;
err = crypto_ablkcipher_encrypt(abreq);
if (err)
return err;
- return crypto_gcm_hash(req);
+ err = gcm_hash(req, pctx);
+ if (err)
+ return err;
+
+ crypto_xor(pctx->auth_tag, pctx->iauth_tag, 16);
+ gcm_enc_copy_hash(req, pctx);
+
+ return 0;
}
-static int crypto_gcm_verify(struct aead_request *req)
+static int crypto_gcm_verify(struct aead_request *req,
+ struct crypto_gcm_req_priv_ctx *pctx)
{
struct crypto_aead *aead = crypto_aead_reqtfm(req);
- struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
- struct crypto_gcm_ghash_ctx *ghash = &pctx->ghash;
u8 *auth_tag = pctx->auth_tag;
u8 *iauth_tag = pctx->iauth_tag;
unsigned int authsize = crypto_aead_authsize(aead);
unsigned int cryptlen = req->cryptlen - authsize;
- crypto_gcm_ghash_final_xor(ghash, req->assoclen, cryptlen, auth_tag);
-
- authsize = crypto_aead_authsize(aead);
+ crypto_xor(auth_tag, iauth_tag, 16);
scatterwalk_map_and_copy(iauth_tag, req->src, cryptlen, authsize, 0);
return memcmp(iauth_tag, auth_tag, authsize) ? -EBADMSG : 0;
}
-static void crypto_gcm_decrypt_done(struct crypto_async_request *areq, int err)
+static void gcm_decrypt_done(struct crypto_async_request *areq, int err)
{
struct aead_request *req = areq->data;
+ struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
if (!err)
- err = crypto_gcm_verify(req);
+ err = crypto_gcm_verify(req, pctx);
aead_request_complete(req, err);
}
+static void gcm_dec_hash_done(struct crypto_async_request *areq, int err)
+{
+ struct aead_request *req = areq->data;
+ struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
+ struct ablkcipher_request *abreq = &pctx->u.abreq;
+ struct crypto_gcm_ghash_ctx *gctx = &pctx->ghash_ctx;
+
+ if (!err) {
+ ablkcipher_request_set_callback(abreq, aead_request_flags(req),
+ gcm_decrypt_done, req);
+ crypto_gcm_init_crypt(abreq, req, gctx->cryptlen);
+ err = crypto_ablkcipher_decrypt(abreq);
+ if (err == -EINPROGRESS || err == -EBUSY)
+ return;
+ }
+
+ gcm_decrypt_done(areq, err);
+}
+
static int crypto_gcm_decrypt(struct aead_request *req)
{
struct crypto_aead *aead = crypto_aead_reqtfm(req);
struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
- struct ablkcipher_request *abreq = &pctx->abreq;
- struct crypto_gcm_ghash_ctx *ghash = &pctx->ghash;
- unsigned int cryptlen = req->cryptlen;
+ struct ablkcipher_request *abreq = &pctx->u.abreq;
+ struct crypto_gcm_ghash_ctx *gctx = &pctx->ghash_ctx;
unsigned int authsize = crypto_aead_authsize(aead);
+ unsigned int cryptlen = req->cryptlen;
int err;
if (cryptlen < authsize)
return -EINVAL;
cryptlen -= authsize;
- crypto_gcm_init_crypt(abreq, req, cryptlen);
- ablkcipher_request_set_callback(abreq, aead_request_flags(req),
- crypto_gcm_decrypt_done, req);
+ gctx->src = req->src;
+ gctx->cryptlen = cryptlen;
+ gctx->complete = gcm_dec_hash_done;
- crypto_gcm_ghash_update_sg(ghash, req->src, cryptlen);
+ err = gcm_hash(req, pctx);
+ if (err)
+ return err;
+ ablkcipher_request_set_callback(abreq, aead_request_flags(req),
+ gcm_decrypt_done, req);
+ crypto_gcm_init_crypt(abreq, req, cryptlen);
err = crypto_ablkcipher_decrypt(abreq);
if (err)
return err;
- return crypto_gcm_verify(req);
+ return crypto_gcm_verify(req, pctx);
}
static int crypto_gcm_init_tfm(struct crypto_tfm *tfm)
struct gcm_instance_ctx *ictx = crypto_instance_ctx(inst);
struct crypto_gcm_ctx *ctx = crypto_tfm_ctx(tfm);
struct crypto_ablkcipher *ctr;
+ struct crypto_ahash *ghash;
unsigned long align;
int err;
+ ghash = crypto_spawn_ahash(&ictx->ghash);
+ if (IS_ERR(ghash))
+ return PTR_ERR(ghash);
+
ctr = crypto_spawn_skcipher(&ictx->ctr);
err = PTR_ERR(ctr);
if (IS_ERR(ctr))
- return err;
+ goto err_free_hash;
ctx->ctr = ctr;
- ctx->gf128 = NULL;
+ ctx->ghash = ghash;
align = crypto_tfm_alg_alignmask(tfm);
align &= ~(crypto_tfm_ctx_alignment() - 1);
tfm->crt_aead.reqsize = align +
- sizeof(struct crypto_gcm_req_priv_ctx) +
- crypto_ablkcipher_reqsize(ctr);
+ offsetof(struct crypto_gcm_req_priv_ctx, u) +
+ max(sizeof(struct ablkcipher_request) +
+ crypto_ablkcipher_reqsize(ctr),
+ sizeof(struct ahash_request) +
+ crypto_ahash_reqsize(ghash));
return 0;
+
+err_free_hash:
+ crypto_free_ahash(ghash);
+ return err;
}
static void crypto_gcm_exit_tfm(struct crypto_tfm *tfm)
{
struct crypto_gcm_ctx *ctx = crypto_tfm_ctx(tfm);
- if (ctx->gf128 != NULL)
- gf128mul_free_4k(ctx->gf128);
-
+ crypto_free_ahash(ctx->ghash);
crypto_free_ablkcipher(ctx->ctr);
}
static struct crypto_instance *crypto_gcm_alloc_common(struct rtattr **tb,
const char *full_name,
- const char *ctr_name)
+ const char *ctr_name,
+ const char *ghash_name)
{
struct crypto_attr_type *algt;
struct crypto_instance *inst;
struct crypto_alg *ctr;
+ struct crypto_alg *ghash_alg;
+ struct ahash_alg *ghash_ahash_alg;
struct gcm_instance_ctx *ctx;
int err;
if ((algt->type ^ CRYPTO_ALG_TYPE_AEAD) & algt->mask)
return ERR_PTR(-EINVAL);
+ ghash_alg = crypto_find_alg(ghash_name, &crypto_ahash_type,
+ CRYPTO_ALG_TYPE_HASH,
+ CRYPTO_ALG_TYPE_AHASH_MASK);
+ err = PTR_ERR(ghash_alg);
+ if (IS_ERR(ghash_alg))
+ return ERR_PTR(err);
+
+ err = -ENOMEM;
inst = kzalloc(sizeof(*inst) + sizeof(*ctx), GFP_KERNEL);
if (!inst)
- return ERR_PTR(-ENOMEM);
+ goto out_put_ghash;
ctx = crypto_instance_ctx(inst);
+ ghash_ahash_alg = container_of(ghash_alg, struct ahash_alg, halg.base);
+ err = crypto_init_ahash_spawn(&ctx->ghash, &ghash_ahash_alg->halg,
+ inst);
+ if (err)
+ goto err_free_inst;
+
crypto_set_skcipher_spawn(&ctx->ctr, inst);
err = crypto_grab_skcipher(&ctx->ctr, ctr_name, 0,
crypto_requires_sync(algt->type,
algt->mask));
if (err)
- goto err_free_inst;
+ goto err_drop_ghash;
ctr = crypto_skcipher_spawn_alg(&ctx->ctr);
err = -ENAMETOOLONG;
if (snprintf(inst->alg.cra_driver_name, CRYPTO_MAX_ALG_NAME,
- "gcm_base(%s)", ctr->cra_driver_name) >=
+ "gcm_base(%s,%s)", ctr->cra_driver_name,
+ ghash_alg->cra_driver_name) >=
CRYPTO_MAX_ALG_NAME)
goto out_put_ctr;
inst->alg.cra_aead.decrypt = crypto_gcm_decrypt;
out:
+ crypto_mod_put(ghash_alg);
return inst;
out_put_ctr:
crypto_drop_skcipher(&ctx->ctr);
+err_drop_ghash:
+ crypto_drop_ahash(&ctx->ghash);
err_free_inst:
kfree(inst);
+out_put_ghash:
inst = ERR_PTR(err);
goto out;
}
CRYPTO_MAX_ALG_NAME)
return ERR_PTR(-ENAMETOOLONG);
- return crypto_gcm_alloc_common(tb, full_name, ctr_name);
+ return crypto_gcm_alloc_common(tb, full_name, ctr_name, "ghash");
}
static void crypto_gcm_free(struct crypto_instance *inst)
struct gcm_instance_ctx *ctx = crypto_instance_ctx(inst);
crypto_drop_skcipher(&ctx->ctr);
+ crypto_drop_ahash(&ctx->ghash);
kfree(inst);
}
{
int err;
const char *ctr_name;
+ const char *ghash_name;
char full_name[CRYPTO_MAX_ALG_NAME];
ctr_name = crypto_attr_alg_name(tb[1]);
if (IS_ERR(ctr_name))
return ERR_PTR(err);
- if (snprintf(full_name, CRYPTO_MAX_ALG_NAME, "gcm_base(%s)",
- ctr_name) >= CRYPTO_MAX_ALG_NAME)
+ ghash_name = crypto_attr_alg_name(tb[2]);
+ err = PTR_ERR(ghash_name);
+ if (IS_ERR(ghash_name))
+ return ERR_PTR(err);
+
+ if (snprintf(full_name, CRYPTO_MAX_ALG_NAME, "gcm_base(%s,%s)",
+ ctr_name, ghash_name) >= CRYPTO_MAX_ALG_NAME)
return ERR_PTR(-ENAMETOOLONG);
- return crypto_gcm_alloc_common(tb, full_name, ctr_name);
+ return crypto_gcm_alloc_common(tb, full_name, ctr_name, ghash_name);
}
static struct crypto_template crypto_gcm_base_tmpl = {
{
int err;
+ gcm_zeroes = kzalloc(16, GFP_KERNEL);
+ if (!gcm_zeroes)
+ return -ENOMEM;
+
err = crypto_register_template(&crypto_gcm_base_tmpl);
if (err)
goto out;
if (err)
goto out_undo_gcm;
-out:
- return err;
+ return 0;
out_undo_gcm:
crypto_unregister_template(&crypto_gcm_tmpl);
out_undo_base:
crypto_unregister_template(&crypto_gcm_base_tmpl);
- goto out;
+out:
+ kfree(gcm_zeroes);
+ return err;
}
static void __exit crypto_gcm_module_exit(void)
{
+ kfree(gcm_zeroes);
crypto_unregister_template(&crypto_rfc4106_tmpl);
crypto_unregister_template(&crypto_gcm_tmpl);
crypto_unregister_template(&crypto_gcm_base_tmpl);
--- /dev/null
+/*
+ * GHASH: digest algorithm for GCM (Galois/Counter Mode).
+ *
+ * Copyright (c) 2007 Nokia Siemens Networks - Mikko Herranen <mh1@iki.fi>
+ * Copyright (c) 2009 Intel Corp.
+ * Author: Huang Ying <ying.huang@intel.com>
+ *
+ * The algorithm implementation is copied from gcm.c.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <crypto/algapi.h>
+#include <crypto/gf128mul.h>
+#include <crypto/internal/hash.h>
+#include <linux/crypto.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#define GHASH_BLOCK_SIZE 16
+#define GHASH_DIGEST_SIZE 16
+
+struct ghash_ctx {
+ struct gf128mul_4k *gf128;
+};
+
+struct ghash_desc_ctx {
+ u8 buffer[GHASH_BLOCK_SIZE];
+ u32 bytes;
+};
+
+static int ghash_init(struct shash_desc *desc)
+{
+ struct ghash_desc_ctx *dctx = shash_desc_ctx(desc);
+
+ memset(dctx, 0, sizeof(*dctx));
+
+ return 0;
+}
+
+static int ghash_setkey(struct crypto_shash *tfm,
+ const u8 *key, unsigned int keylen)
+{
+ struct ghash_ctx *ctx = crypto_shash_ctx(tfm);
+
+ if (keylen != GHASH_BLOCK_SIZE) {
+ crypto_shash_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN);
+ return -EINVAL;
+ }
+
+ if (ctx->gf128)
+ gf128mul_free_4k(ctx->gf128);
+ ctx->gf128 = gf128mul_init_4k_lle((be128 *)key);
+ if (!ctx->gf128)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static int ghash_update(struct shash_desc *desc,
+ const u8 *src, unsigned int srclen)
+{
+ struct ghash_desc_ctx *dctx = shash_desc_ctx(desc);
+ struct ghash_ctx *ctx = crypto_shash_ctx(desc->tfm);
+ u8 *dst = dctx->buffer;
+
+ if (dctx->bytes) {
+ int n = min(srclen, dctx->bytes);
+ u8 *pos = dst + (GHASH_BLOCK_SIZE - dctx->bytes);
+
+ dctx->bytes -= n;
+ srclen -= n;
+
+ while (n--)
+ *pos++ ^= *src++;
+
+ if (!dctx->bytes)
+ gf128mul_4k_lle((be128 *)dst, ctx->gf128);
+ }
+
+ while (srclen >= GHASH_BLOCK_SIZE) {
+ crypto_xor(dst, src, GHASH_BLOCK_SIZE);
+ gf128mul_4k_lle((be128 *)dst, ctx->gf128);
+ src += GHASH_BLOCK_SIZE;
+ srclen -= GHASH_BLOCK_SIZE;
+ }
+
+ if (srclen) {
+ dctx->bytes = GHASH_BLOCK_SIZE - srclen;
+ while (srclen--)
+ *dst++ ^= *src++;
+ }
+
+ return 0;
+}
+
+static void ghash_flush(struct ghash_ctx *ctx, struct ghash_desc_ctx *dctx)
+{
+ u8 *dst = dctx->buffer;
+
+ if (dctx->bytes) {
+ u8 *tmp = dst + (GHASH_BLOCK_SIZE - dctx->bytes);
+
+ while (dctx->bytes--)
+ *tmp++ ^= 0;
+
+ gf128mul_4k_lle((be128 *)dst, ctx->gf128);
+ }
+
+ dctx->bytes = 0;
+}
+
+static int ghash_final(struct shash_desc *desc, u8 *dst)
+{
+ struct ghash_desc_ctx *dctx = shash_desc_ctx(desc);
+ struct ghash_ctx *ctx = crypto_shash_ctx(desc->tfm);
+ u8 *buf = dctx->buffer;
+
+ ghash_flush(ctx, dctx);
+ memcpy(dst, buf, GHASH_BLOCK_SIZE);
+
+ return 0;
+}
+
+static void ghash_exit_tfm(struct crypto_tfm *tfm)
+{
+ struct ghash_ctx *ctx = crypto_tfm_ctx(tfm);
+ if (ctx->gf128)
+ gf128mul_free_4k(ctx->gf128);
+}
+
+static struct shash_alg ghash_alg = {
+ .digestsize = GHASH_DIGEST_SIZE,
+ .init = ghash_init,
+ .update = ghash_update,
+ .final = ghash_final,
+ .setkey = ghash_setkey,
+ .descsize = sizeof(struct ghash_desc_ctx),
+ .base = {
+ .cra_name = "ghash",
+ .cra_driver_name = "ghash-generic",
+ .cra_priority = 100,
+ .cra_flags = CRYPTO_ALG_TYPE_SHASH,
+ .cra_blocksize = GHASH_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct ghash_ctx),
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(ghash_alg.base.cra_list),
+ .cra_exit = ghash_exit_tfm,
+ },
+};
+
+static int __init ghash_mod_init(void)
+{
+ return crypto_register_shash(&ghash_alg);
+}
+
+static void __exit ghash_mod_exit(void)
+{
+ crypto_unregister_shash(&ghash_alg);
+}
+
+module_init(ghash_mod_init);
+module_exit(ghash_mod_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("GHASH Message Digest Algorithm");
+MODULE_ALIAS("ghash");
#include <linux/string.h>
struct hmac_ctx {
- struct crypto_hash *child;
+ struct crypto_shash *hash;
};
static inline void *align_ptr(void *p, unsigned int align)
return (void *)ALIGN((unsigned long)p, align);
}
-static inline struct hmac_ctx *hmac_ctx(struct crypto_hash *tfm)
+static inline struct hmac_ctx *hmac_ctx(struct crypto_shash *tfm)
{
- return align_ptr(crypto_hash_ctx_aligned(tfm) +
- crypto_hash_blocksize(tfm) * 2 +
- crypto_hash_digestsize(tfm), sizeof(void *));
+ return align_ptr(crypto_shash_ctx_aligned(tfm) +
+ crypto_shash_statesize(tfm) * 2,
+ crypto_tfm_ctx_alignment());
}
-static int hmac_setkey(struct crypto_hash *parent,
+static int hmac_setkey(struct crypto_shash *parent,
const u8 *inkey, unsigned int keylen)
{
- int bs = crypto_hash_blocksize(parent);
- int ds = crypto_hash_digestsize(parent);
- char *ipad = crypto_hash_ctx_aligned(parent);
- char *opad = ipad + bs;
- char *digest = opad + bs;
- struct hmac_ctx *ctx = align_ptr(digest + ds, sizeof(void *));
- struct crypto_hash *tfm = ctx->child;
+ int bs = crypto_shash_blocksize(parent);
+ int ds = crypto_shash_digestsize(parent);
+ int ss = crypto_shash_statesize(parent);
+ char *ipad = crypto_shash_ctx_aligned(parent);
+ char *opad = ipad + ss;
+ struct hmac_ctx *ctx = align_ptr(opad + ss,
+ crypto_tfm_ctx_alignment());
+ struct crypto_shash *hash = ctx->hash;
+ struct {
+ struct shash_desc shash;
+ char ctx[crypto_shash_descsize(hash)];
+ } desc;
unsigned int i;
+ desc.shash.tfm = hash;
+ desc.shash.flags = crypto_shash_get_flags(parent) &
+ CRYPTO_TFM_REQ_MAY_SLEEP;
+
if (keylen > bs) {
- struct hash_desc desc;
- struct scatterlist tmp;
- int tmplen;
int err;
- desc.tfm = tfm;
- desc.flags = crypto_hash_get_flags(parent);
- desc.flags &= CRYPTO_TFM_REQ_MAY_SLEEP;
-
- err = crypto_hash_init(&desc);
+ err = crypto_shash_digest(&desc.shash, inkey, keylen, ipad);
if (err)
return err;
- tmplen = bs * 2 + ds;
- sg_init_one(&tmp, ipad, tmplen);
-
- for (; keylen > tmplen; inkey += tmplen, keylen -= tmplen) {
- memcpy(ipad, inkey, tmplen);
- err = crypto_hash_update(&desc, &tmp, tmplen);
- if (err)
- return err;
- }
-
- if (keylen) {
- memcpy(ipad, inkey, keylen);
- err = crypto_hash_update(&desc, &tmp, keylen);
- if (err)
- return err;
- }
-
- err = crypto_hash_final(&desc, digest);
- if (err)
- return err;
-
- inkey = digest;
keylen = ds;
- }
+ } else
+ memcpy(ipad, inkey, keylen);
- memcpy(ipad, inkey, keylen);
memset(ipad + keylen, 0, bs - keylen);
memcpy(opad, ipad, bs);
opad[i] ^= 0x5c;
}
- return 0;
+ return crypto_shash_init(&desc.shash) ?:
+ crypto_shash_update(&desc.shash, ipad, bs) ?:
+ crypto_shash_export(&desc.shash, ipad) ?:
+ crypto_shash_init(&desc.shash) ?:
+ crypto_shash_update(&desc.shash, opad, bs) ?:
+ crypto_shash_export(&desc.shash, opad);
}
-static int hmac_init(struct hash_desc *pdesc)
+static int hmac_export(struct shash_desc *pdesc, void *out)
{
- struct crypto_hash *parent = pdesc->tfm;
- int bs = crypto_hash_blocksize(parent);
- int ds = crypto_hash_digestsize(parent);
- char *ipad = crypto_hash_ctx_aligned(parent);
- struct hmac_ctx *ctx = align_ptr(ipad + bs * 2 + ds, sizeof(void *));
- struct hash_desc desc;
- struct scatterlist tmp;
- int err;
+ struct shash_desc *desc = shash_desc_ctx(pdesc);
- desc.tfm = ctx->child;
- desc.flags = pdesc->flags & CRYPTO_TFM_REQ_MAY_SLEEP;
- sg_init_one(&tmp, ipad, bs);
+ desc->flags = pdesc->flags & CRYPTO_TFM_REQ_MAY_SLEEP;
- err = crypto_hash_init(&desc);
- if (unlikely(err))
- return err;
-
- return crypto_hash_update(&desc, &tmp, bs);
+ return crypto_shash_export(desc, out);
}
-static int hmac_update(struct hash_desc *pdesc,
- struct scatterlist *sg, unsigned int nbytes)
+static int hmac_import(struct shash_desc *pdesc, const void *in)
{
+ struct shash_desc *desc = shash_desc_ctx(pdesc);
struct hmac_ctx *ctx = hmac_ctx(pdesc->tfm);
- struct hash_desc desc;
- desc.tfm = ctx->child;
- desc.flags = pdesc->flags & CRYPTO_TFM_REQ_MAY_SLEEP;
+ desc->tfm = ctx->hash;
+ desc->flags = pdesc->flags & CRYPTO_TFM_REQ_MAY_SLEEP;
- return crypto_hash_update(&desc, sg, nbytes);
+ return crypto_shash_import(desc, in);
}
-static int hmac_final(struct hash_desc *pdesc, u8 *out)
+static int hmac_init(struct shash_desc *pdesc)
{
- struct crypto_hash *parent = pdesc->tfm;
- int bs = crypto_hash_blocksize(parent);
- int ds = crypto_hash_digestsize(parent);
- char *opad = crypto_hash_ctx_aligned(parent) + bs;
- char *digest = opad + bs;
- struct hmac_ctx *ctx = align_ptr(digest + ds, sizeof(void *));
- struct hash_desc desc;
- struct scatterlist tmp;
- int err;
+ return hmac_import(pdesc, crypto_shash_ctx_aligned(pdesc->tfm));
+}
- desc.tfm = ctx->child;
- desc.flags = pdesc->flags & CRYPTO_TFM_REQ_MAY_SLEEP;
- sg_init_one(&tmp, opad, bs + ds);
+static int hmac_update(struct shash_desc *pdesc,
+ const u8 *data, unsigned int nbytes)
+{
+ struct shash_desc *desc = shash_desc_ctx(pdesc);
- err = crypto_hash_final(&desc, digest);
- if (unlikely(err))
- return err;
+ desc->flags = pdesc->flags & CRYPTO_TFM_REQ_MAY_SLEEP;
- return crypto_hash_digest(&desc, &tmp, bs + ds, out);
+ return crypto_shash_update(desc, data, nbytes);
}
-static int hmac_digest(struct hash_desc *pdesc, struct scatterlist *sg,
- unsigned int nbytes, u8 *out)
+static int hmac_final(struct shash_desc *pdesc, u8 *out)
{
- struct crypto_hash *parent = pdesc->tfm;
- int bs = crypto_hash_blocksize(parent);
- int ds = crypto_hash_digestsize(parent);
- char *ipad = crypto_hash_ctx_aligned(parent);
- char *opad = ipad + bs;
- char *digest = opad + bs;
- struct hmac_ctx *ctx = align_ptr(digest + ds, sizeof(void *));
- struct hash_desc desc;
- struct scatterlist sg1[2];
- struct scatterlist sg2[1];
- int err;
+ struct crypto_shash *parent = pdesc->tfm;
+ int ds = crypto_shash_digestsize(parent);
+ int ss = crypto_shash_statesize(parent);
+ char *opad = crypto_shash_ctx_aligned(parent) + ss;
+ struct shash_desc *desc = shash_desc_ctx(pdesc);
- desc.tfm = ctx->child;
- desc.flags = pdesc->flags & CRYPTO_TFM_REQ_MAY_SLEEP;
+ desc->flags = pdesc->flags & CRYPTO_TFM_REQ_MAY_SLEEP;
- sg_init_table(sg1, 2);
- sg_set_buf(sg1, ipad, bs);
- scatterwalk_sg_chain(sg1, 2, sg);
+ return crypto_shash_final(desc, out) ?:
+ crypto_shash_import(desc, opad) ?:
+ crypto_shash_finup(desc, out, ds, out);
+}
- sg_init_table(sg2, 1);
- sg_set_buf(sg2, opad, bs + ds);
+static int hmac_finup(struct shash_desc *pdesc, const u8 *data,
+ unsigned int nbytes, u8 *out)
+{
- err = crypto_hash_digest(&desc, sg1, nbytes + bs, digest);
- if (unlikely(err))
- return err;
+ struct crypto_shash *parent = pdesc->tfm;
+ int ds = crypto_shash_digestsize(parent);
+ int ss = crypto_shash_statesize(parent);
+ char *opad = crypto_shash_ctx_aligned(parent) + ss;
+ struct shash_desc *desc = shash_desc_ctx(pdesc);
- return crypto_hash_digest(&desc, sg2, bs + ds, out);
+ desc->flags = pdesc->flags & CRYPTO_TFM_REQ_MAY_SLEEP;
+
+ return crypto_shash_finup(desc, data, nbytes, out) ?:
+ crypto_shash_import(desc, opad) ?:
+ crypto_shash_finup(desc, out, ds, out);
}
static int hmac_init_tfm(struct crypto_tfm *tfm)
{
- struct crypto_hash *hash;
+ struct crypto_shash *parent = __crypto_shash_cast(tfm);
+ struct crypto_shash *hash;
struct crypto_instance *inst = (void *)tfm->__crt_alg;
- struct crypto_spawn *spawn = crypto_instance_ctx(inst);
- struct hmac_ctx *ctx = hmac_ctx(__crypto_hash_cast(tfm));
+ struct crypto_shash_spawn *spawn = crypto_instance_ctx(inst);
+ struct hmac_ctx *ctx = hmac_ctx(parent);
- hash = crypto_spawn_hash(spawn);
+ hash = crypto_spawn_shash(spawn);
if (IS_ERR(hash))
return PTR_ERR(hash);
- ctx->child = hash;
+ parent->descsize = sizeof(struct shash_desc) +
+ crypto_shash_descsize(hash);
+
+ ctx->hash = hash;
return 0;
}
static void hmac_exit_tfm(struct crypto_tfm *tfm)
{
- struct hmac_ctx *ctx = hmac_ctx(__crypto_hash_cast(tfm));
- crypto_free_hash(ctx->child);
+ struct hmac_ctx *ctx = hmac_ctx(__crypto_shash_cast(tfm));
+ crypto_free_shash(ctx->hash);
}
-static void hmac_free(struct crypto_instance *inst)
+static int hmac_create(struct crypto_template *tmpl, struct rtattr **tb)
{
- crypto_drop_spawn(crypto_instance_ctx(inst));
- kfree(inst);
-}
-
-static struct crypto_instance *hmac_alloc(struct rtattr **tb)
-{
- struct crypto_instance *inst;
+ struct shash_instance *inst;
struct crypto_alg *alg;
+ struct shash_alg *salg;
int err;
int ds;
+ int ss;
- err = crypto_check_attr_type(tb, CRYPTO_ALG_TYPE_HASH);
+ err = crypto_check_attr_type(tb, CRYPTO_ALG_TYPE_SHASH);
if (err)
- return ERR_PTR(err);
-
- alg = crypto_get_attr_alg(tb, CRYPTO_ALG_TYPE_HASH,
- CRYPTO_ALG_TYPE_HASH_MASK);
- if (IS_ERR(alg))
- return ERR_CAST(alg);
-
- inst = ERR_PTR(-EINVAL);
- ds = alg->cra_type == &crypto_hash_type ?
- alg->cra_hash.digestsize :
- alg->cra_type ?
- __crypto_shash_alg(alg)->digestsize :
- alg->cra_digest.dia_digestsize;
- if (ds > alg->cra_blocksize)
+ return err;
+
+ salg = shash_attr_alg(tb[1], 0, 0);
+ if (IS_ERR(salg))
+ return PTR_ERR(salg);
+
+ err = -EINVAL;
+ ds = salg->digestsize;
+ ss = salg->statesize;
+ alg = &salg->base;
+ if (ds > alg->cra_blocksize ||
+ ss < alg->cra_blocksize)
goto out_put_alg;
- inst = crypto_alloc_instance("hmac", alg);
+ inst = shash_alloc_instance("hmac", alg);
+ err = PTR_ERR(inst);
if (IS_ERR(inst))
goto out_put_alg;
- inst->alg.cra_flags = CRYPTO_ALG_TYPE_HASH;
- inst->alg.cra_priority = alg->cra_priority;
- inst->alg.cra_blocksize = alg->cra_blocksize;
- inst->alg.cra_alignmask = alg->cra_alignmask;
- inst->alg.cra_type = &crypto_hash_type;
-
- inst->alg.cra_hash.digestsize = ds;
-
- inst->alg.cra_ctxsize = sizeof(struct hmac_ctx) +
- ALIGN(inst->alg.cra_blocksize * 2 + ds,
- sizeof(void *));
-
- inst->alg.cra_init = hmac_init_tfm;
- inst->alg.cra_exit = hmac_exit_tfm;
-
- inst->alg.cra_hash.init = hmac_init;
- inst->alg.cra_hash.update = hmac_update;
- inst->alg.cra_hash.final = hmac_final;
- inst->alg.cra_hash.digest = hmac_digest;
- inst->alg.cra_hash.setkey = hmac_setkey;
+ err = crypto_init_shash_spawn(shash_instance_ctx(inst), salg,
+ shash_crypto_instance(inst));
+ if (err)
+ goto out_free_inst;
+
+ inst->alg.base.cra_priority = alg->cra_priority;
+ inst->alg.base.cra_blocksize = alg->cra_blocksize;
+ inst->alg.base.cra_alignmask = alg->cra_alignmask;
+
+ ss = ALIGN(ss, alg->cra_alignmask + 1);
+ inst->alg.digestsize = ds;
+ inst->alg.statesize = ss;
+
+ inst->alg.base.cra_ctxsize = sizeof(struct hmac_ctx) +
+ ALIGN(ss * 2, crypto_tfm_ctx_alignment());
+
+ inst->alg.base.cra_init = hmac_init_tfm;
+ inst->alg.base.cra_exit = hmac_exit_tfm;
+
+ inst->alg.init = hmac_init;
+ inst->alg.update = hmac_update;
+ inst->alg.final = hmac_final;
+ inst->alg.finup = hmac_finup;
+ inst->alg.export = hmac_export;
+ inst->alg.import = hmac_import;
+ inst->alg.setkey = hmac_setkey;
+
+ err = shash_register_instance(tmpl, inst);
+ if (err) {
+out_free_inst:
+ shash_free_instance(shash_crypto_instance(inst));
+ }
out_put_alg:
crypto_mod_put(alg);
- return inst;
+ return err;
}
static struct crypto_template hmac_tmpl = {
.name = "hmac",
- .alloc = hmac_alloc,
- .free = hmac_free,
+ .create = hmac_create,
+ .free = shash_free_instance,
.module = THIS_MODULE,
};
#include <linux/notifier.h>
#include <linux/rwsem.h>
#include <linux/slab.h>
-
-#ifdef CONFIG_CRYPTO_FIPS
-extern int fips_enabled;
-#else
-#define fips_enabled 0
-#endif
+#include <linux/fips.h>
/* Crypto notification events. */
enum {
{ }
#endif
-static inline unsigned int crypto_digest_ctxsize(struct crypto_alg *alg)
-{
- unsigned int len = alg->cra_ctxsize;
-
- if (alg->cra_alignmask) {
- len = ALIGN(len, (unsigned long)alg->cra_alignmask + 1);
- len += alg->cra_digest.dia_digestsize;
- }
-
- return len;
-}
-
static inline unsigned int crypto_cipher_ctxsize(struct crypto_alg *alg)
{
return alg->cra_ctxsize;
struct crypto_alg *crypto_alg_lookup(const char *name, u32 type, u32 mask);
struct crypto_alg *crypto_alg_mod_lookup(const char *name, u32 type, u32 mask);
-int crypto_init_digest_ops(struct crypto_tfm *tfm);
-int crypto_init_digest_ops_async(struct crypto_tfm *tfm);
int crypto_init_cipher_ops(struct crypto_tfm *tfm);
int crypto_init_compress_ops(struct crypto_tfm *tfm);
-void crypto_exit_digest_ops(struct crypto_tfm *tfm);
void crypto_exit_cipher_ops(struct crypto_tfm *tfm);
void crypto_exit_compress_ops(struct crypto_tfm *tfm);
u32 mask);
void *crypto_create_tfm(struct crypto_alg *alg,
const struct crypto_type *frontend);
+struct crypto_alg *crypto_find_alg(const char *alg_name,
+ const struct crypto_type *frontend,
+ u32 type, u32 mask);
void *crypto_alloc_tfm(const char *alg_name,
const struct crypto_type *frontend, u32 type, u32 mask);
-int crypto_register_instance(struct crypto_template *tmpl,
- struct crypto_instance *inst);
-
int crypto_register_notifier(struct notifier_block *nb);
int crypto_unregister_notifier(struct notifier_block *nb);
int crypto_probing_notify(unsigned long val, void *v);
return 0;
}
-static unsigned int crypto_pcomp_extsize(struct crypto_alg *alg,
- const struct crypto_type *frontend)
+static unsigned int crypto_pcomp_extsize(struct crypto_alg *alg)
{
return alg->cra_ctxsize;
}
-static int crypto_pcomp_init_tfm(struct crypto_tfm *tfm,
- const struct crypto_type *frontend)
+static int crypto_pcomp_init_tfm(struct crypto_tfm *tfm)
{
return 0;
}
EXPORT_SYMBOL_GPL(crypto_put_default_rng);
MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Random Number Genertor");
+MODULE_DESCRIPTION("Random Number Generator");
#include <crypto/sha.h>
#include <asm/byteorder.h>
-struct sha1_ctx {
- u64 count;
- u32 state[5];
- u8 buffer[64];
-};
-
static int sha1_init(struct shash_desc *desc)
{
- struct sha1_ctx *sctx = shash_desc_ctx(desc);
+ struct sha1_state *sctx = shash_desc_ctx(desc);
- static const struct sha1_ctx initstate = {
- 0,
- { SHA1_H0, SHA1_H1, SHA1_H2, SHA1_H3, SHA1_H4 },
- { 0, }
+ *sctx = (struct sha1_state){
+ .state = { SHA1_H0, SHA1_H1, SHA1_H2, SHA1_H3, SHA1_H4 },
};
- *sctx = initstate;
-
return 0;
}
static int sha1_update(struct shash_desc *desc, const u8 *data,
unsigned int len)
{
- struct sha1_ctx *sctx = shash_desc_ctx(desc);
+ struct sha1_state *sctx = shash_desc_ctx(desc);
unsigned int partial, done;
const u8 *src;
/* Add padding and return the message digest. */
static int sha1_final(struct shash_desc *desc, u8 *out)
{
- struct sha1_ctx *sctx = shash_desc_ctx(desc);
+ struct sha1_state *sctx = shash_desc_ctx(desc);
__be32 *dst = (__be32 *)out;
u32 i, index, padlen;
__be64 bits;
return 0;
}
+static int sha1_export(struct shash_desc *desc, void *out)
+{
+ struct sha1_state *sctx = shash_desc_ctx(desc);
+
+ memcpy(out, sctx, sizeof(*sctx));
+ return 0;
+}
+
+static int sha1_import(struct shash_desc *desc, const void *in)
+{
+ struct sha1_state *sctx = shash_desc_ctx(desc);
+
+ memcpy(sctx, in, sizeof(*sctx));
+ return 0;
+}
+
static struct shash_alg alg = {
.digestsize = SHA1_DIGEST_SIZE,
.init = sha1_init,
.update = sha1_update,
.final = sha1_final,
- .descsize = sizeof(struct sha1_ctx),
+ .export = sha1_export,
+ .import = sha1_import,
+ .descsize = sizeof(struct sha1_state),
+ .statesize = sizeof(struct sha1_state),
.base = {
.cra_name = "sha1",
.cra_driver_name= "sha1-generic",
#include <crypto/sha.h>
#include <asm/byteorder.h>
-struct sha256_ctx {
- u32 count[2];
- u32 state[8];
- u8 buf[128];
-};
-
static inline u32 Ch(u32 x, u32 y, u32 z)
{
return z ^ (x & (y ^ z));
static int sha224_init(struct shash_desc *desc)
{
- struct sha256_ctx *sctx = shash_desc_ctx(desc);
+ struct sha256_state *sctx = shash_desc_ctx(desc);
sctx->state[0] = SHA224_H0;
sctx->state[1] = SHA224_H1;
sctx->state[2] = SHA224_H2;
sctx->state[5] = SHA224_H5;
sctx->state[6] = SHA224_H6;
sctx->state[7] = SHA224_H7;
- sctx->count[0] = 0;
- sctx->count[1] = 0;
+ sctx->count = 0;
return 0;
}
static int sha256_init(struct shash_desc *desc)
{
- struct sha256_ctx *sctx = shash_desc_ctx(desc);
+ struct sha256_state *sctx = shash_desc_ctx(desc);
sctx->state[0] = SHA256_H0;
sctx->state[1] = SHA256_H1;
sctx->state[2] = SHA256_H2;
sctx->state[5] = SHA256_H5;
sctx->state[6] = SHA256_H6;
sctx->state[7] = SHA256_H7;
- sctx->count[0] = sctx->count[1] = 0;
+ sctx->count = 0;
return 0;
}
static int sha256_update(struct shash_desc *desc, const u8 *data,
unsigned int len)
{
- struct sha256_ctx *sctx = shash_desc_ctx(desc);
- unsigned int i, index, part_len;
-
- /* Compute number of bytes mod 128 */
- index = (unsigned int)((sctx->count[0] >> 3) & 0x3f);
-
- /* Update number of bits */
- if ((sctx->count[0] += (len << 3)) < (len << 3)) {
- sctx->count[1]++;
- sctx->count[1] += (len >> 29);
- }
-
- part_len = 64 - index;
-
- /* Transform as many times as possible. */
- if (len >= part_len) {
- memcpy(&sctx->buf[index], data, part_len);
- sha256_transform(sctx->state, sctx->buf);
-
- for (i = part_len; i + 63 < len; i += 64)
- sha256_transform(sctx->state, &data[i]);
- index = 0;
- } else {
- i = 0;
+ struct sha256_state *sctx = shash_desc_ctx(desc);
+ unsigned int partial, done;
+ const u8 *src;
+
+ partial = sctx->count & 0x3f;
+ sctx->count += len;
+ done = 0;
+ src = data;
+
+ if ((partial + len) > 63) {
+ if (partial) {
+ done = -partial;
+ memcpy(sctx->buf + partial, data, done + 64);
+ src = sctx->buf;
+ }
+
+ do {
+ sha256_transform(sctx->state, src);
+ done += 64;
+ src = data + done;
+ } while (done + 63 < len);
+
+ partial = 0;
}
-
- /* Buffer remaining input */
- memcpy(&sctx->buf[index], &data[i], len-i);
+ memcpy(sctx->buf + partial, src, len - done);
return 0;
}
static int sha256_final(struct shash_desc *desc, u8 *out)
{
- struct sha256_ctx *sctx = shash_desc_ctx(desc);
+ struct sha256_state *sctx = shash_desc_ctx(desc);
__be32 *dst = (__be32 *)out;
- __be32 bits[2];
+ __be64 bits;
unsigned int index, pad_len;
int i;
static const u8 padding[64] = { 0x80, };
/* Save number of bits */
- bits[1] = cpu_to_be32(sctx->count[0]);
- bits[0] = cpu_to_be32(sctx->count[1]);
+ bits = cpu_to_be64(sctx->count << 3);
/* Pad out to 56 mod 64. */
- index = (sctx->count[0] >> 3) & 0x3f;
+ index = sctx->count & 0x3f;
pad_len = (index < 56) ? (56 - index) : ((64+56) - index);
sha256_update(desc, padding, pad_len);
/* Append length (before padding) */
- sha256_update(desc, (const u8 *)bits, sizeof(bits));
+ sha256_update(desc, (const u8 *)&bits, sizeof(bits));
/* Store state in digest */
for (i = 0; i < 8; i++)
return 0;
}
+static int sha256_export(struct shash_desc *desc, void *out)
+{
+ struct sha256_state *sctx = shash_desc_ctx(desc);
+
+ memcpy(out, sctx, sizeof(*sctx));
+ return 0;
+}
+
+static int sha256_import(struct shash_desc *desc, const void *in)
+{
+ struct sha256_state *sctx = shash_desc_ctx(desc);
+
+ memcpy(sctx, in, sizeof(*sctx));
+ return 0;
+}
+
static struct shash_alg sha256 = {
.digestsize = SHA256_DIGEST_SIZE,
.init = sha256_init,
.update = sha256_update,
.final = sha256_final,
- .descsize = sizeof(struct sha256_ctx),
+ .export = sha256_export,
+ .import = sha256_import,
+ .descsize = sizeof(struct sha256_state),
+ .statesize = sizeof(struct sha256_state),
.base = {
.cra_name = "sha256",
.cra_driver_name= "sha256-generic",
.init = sha224_init,
.update = sha256_update,
.final = sha224_final,
- .descsize = sizeof(struct sha256_ctx),
+ .descsize = sizeof(struct sha256_state),
.base = {
.cra_name = "sha224",
.cra_driver_name= "sha224-generic",
#include <linux/percpu.h>
#include <asm/byteorder.h>
-struct sha512_ctx {
- u64 state[8];
- u32 count[4];
- u8 buf[128];
-};
-
static DEFINE_PER_CPU(u64[80], msg_schedule);
static inline u64 Ch(u64 x, u64 y, u64 z)
static int
sha512_init(struct shash_desc *desc)
{
- struct sha512_ctx *sctx = shash_desc_ctx(desc);
+ struct sha512_state *sctx = shash_desc_ctx(desc);
sctx->state[0] = SHA512_H0;
sctx->state[1] = SHA512_H1;
sctx->state[2] = SHA512_H2;
sctx->state[5] = SHA512_H5;
sctx->state[6] = SHA512_H6;
sctx->state[7] = SHA512_H7;
- sctx->count[0] = sctx->count[1] = sctx->count[2] = sctx->count[3] = 0;
+ sctx->count[0] = sctx->count[1] = 0;
return 0;
}
static int
sha384_init(struct shash_desc *desc)
{
- struct sha512_ctx *sctx = shash_desc_ctx(desc);
+ struct sha512_state *sctx = shash_desc_ctx(desc);
sctx->state[0] = SHA384_H0;
sctx->state[1] = SHA384_H1;
sctx->state[2] = SHA384_H2;
sctx->state[5] = SHA384_H5;
sctx->state[6] = SHA384_H6;
sctx->state[7] = SHA384_H7;
- sctx->count[0] = sctx->count[1] = sctx->count[2] = sctx->count[3] = 0;
+ sctx->count[0] = sctx->count[1] = 0;
return 0;
}
static int
sha512_update(struct shash_desc *desc, const u8 *data, unsigned int len)
{
- struct sha512_ctx *sctx = shash_desc_ctx(desc);
+ struct sha512_state *sctx = shash_desc_ctx(desc);
unsigned int i, index, part_len;
/* Compute number of bytes mod 128 */
- index = (unsigned int)((sctx->count[0] >> 3) & 0x7F);
-
- /* Update number of bits */
- if ((sctx->count[0] += (len << 3)) < (len << 3)) {
- if ((sctx->count[1] += 1) < 1)
- if ((sctx->count[2] += 1) < 1)
- sctx->count[3]++;
- sctx->count[1] += (len >> 29);
- }
+ index = sctx->count[0] & 0x7f;
+
+ /* Update number of bytes */
+ if (!(sctx->count[0] += len))
+ sctx->count[1]++;
part_len = 128 - index;
static int
sha512_final(struct shash_desc *desc, u8 *hash)
{
- struct sha512_ctx *sctx = shash_desc_ctx(desc);
+ struct sha512_state *sctx = shash_desc_ctx(desc);
static u8 padding[128] = { 0x80, };
__be64 *dst = (__be64 *)hash;
- __be32 bits[4];
+ __be64 bits[2];
unsigned int index, pad_len;
int i;
/* Save number of bits */
- bits[3] = cpu_to_be32(sctx->count[0]);
- bits[2] = cpu_to_be32(sctx->count[1]);
- bits[1] = cpu_to_be32(sctx->count[2]);
- bits[0] = cpu_to_be32(sctx->count[3]);
+ bits[1] = cpu_to_be64(sctx->count[0] << 3);
+ bits[0] = cpu_to_be64(sctx->count[1] << 3 | sctx->count[0] >> 61);
/* Pad out to 112 mod 128. */
- index = (sctx->count[0] >> 3) & 0x7f;
+ index = sctx->count[0] & 0x7f;
pad_len = (index < 112) ? (112 - index) : ((128+112) - index);
sha512_update(desc, padding, pad_len);
dst[i] = cpu_to_be64(sctx->state[i]);
/* Zeroize sensitive information. */
- memset(sctx, 0, sizeof(struct sha512_ctx));
+ memset(sctx, 0, sizeof(struct sha512_state));
return 0;
}
.init = sha512_init,
.update = sha512_update,
.final = sha512_final,
- .descsize = sizeof(struct sha512_ctx),
+ .descsize = sizeof(struct sha512_state),
.base = {
.cra_name = "sha512",
.cra_flags = CRYPTO_ALG_TYPE_SHASH,
.init = sha384_init,
.update = sha512_update,
.final = sha384_final,
- .descsize = sizeof(struct sha512_ctx),
+ .descsize = sizeof(struct sha512_state),
.base = {
.cra_name = "sha384",
.cra_flags = CRYPTO_ALG_TYPE_SHASH,
static const struct crypto_type crypto_shash_type;
+static int shash_no_setkey(struct crypto_shash *tfm, const u8 *key,
+ unsigned int keylen)
+{
+ return -ENOSYS;
+}
+
static int shash_setkey_unaligned(struct crypto_shash *tfm, const u8 *key,
unsigned int keylen)
{
alignbuffer = (u8 *)ALIGN((unsigned long)buffer, alignmask + 1);
memcpy(alignbuffer, key, keylen);
err = shash->setkey(tfm, alignbuffer, keylen);
- memset(alignbuffer, 0, keylen);
- kfree(buffer);
+ kzfree(buffer);
return err;
}
struct shash_alg *shash = crypto_shash_alg(tfm);
unsigned long alignmask = crypto_shash_alignmask(tfm);
- if (!shash->setkey)
- return -ENOSYS;
-
if ((unsigned long)key & alignmask)
return shash_setkey_unaligned(tfm, key, keylen);
unsigned long alignmask = crypto_shash_alignmask(tfm);
unsigned int unaligned_len = alignmask + 1 -
((unsigned long)data & alignmask);
- u8 buf[shash_align_buffer_size(unaligned_len, alignmask)]
+ u8 ubuf[shash_align_buffer_size(unaligned_len, alignmask)]
__attribute__ ((aligned));
+ u8 *buf = PTR_ALIGN(&ubuf[0], alignmask + 1);
+ int err;
if (unaligned_len > len)
unaligned_len = len;
memcpy(buf, data, unaligned_len);
+ err = shash->update(desc, buf, unaligned_len);
+ memset(buf, 0, unaligned_len);
- return shash->update(desc, buf, unaligned_len) ?:
+ return err ?:
shash->update(desc, data + unaligned_len, len - unaligned_len);
}
unsigned long alignmask = crypto_shash_alignmask(tfm);
struct shash_alg *shash = crypto_shash_alg(tfm);
unsigned int ds = crypto_shash_digestsize(tfm);
- u8 buf[shash_align_buffer_size(ds, alignmask)]
+ u8 ubuf[shash_align_buffer_size(ds, alignmask)]
__attribute__ ((aligned));
+ u8 *buf = PTR_ALIGN(&ubuf[0], alignmask + 1);
int err;
err = shash->final(desc, buf);
+ if (err)
+ goto out;
+
memcpy(out, buf, ds);
+
+out:
+ memset(buf, 0, ds);
return err;
}
struct shash_alg *shash = crypto_shash_alg(tfm);
unsigned long alignmask = crypto_shash_alignmask(tfm);
- if (((unsigned long)data | (unsigned long)out) & alignmask ||
- !shash->finup)
+ if (((unsigned long)data | (unsigned long)out) & alignmask)
return shash_finup_unaligned(desc, data, len, out);
return shash->finup(desc, data, len, out);
unsigned int len, u8 *out)
{
return crypto_shash_init(desc) ?:
- crypto_shash_update(desc, data, len) ?:
- crypto_shash_final(desc, out);
+ crypto_shash_finup(desc, data, len, out);
}
int crypto_shash_digest(struct shash_desc *desc, const u8 *data,
struct shash_alg *shash = crypto_shash_alg(tfm);
unsigned long alignmask = crypto_shash_alignmask(tfm);
- if (((unsigned long)data | (unsigned long)out) & alignmask ||
- !shash->digest)
+ if (((unsigned long)data | (unsigned long)out) & alignmask)
return shash_digest_unaligned(desc, data, len, out);
return shash->digest(desc, data, len, out);
}
EXPORT_SYMBOL_GPL(crypto_shash_digest);
-int crypto_shash_import(struct shash_desc *desc, const u8 *in)
+static int shash_default_export(struct shash_desc *desc, void *out)
{
- struct crypto_shash *tfm = desc->tfm;
- struct shash_alg *alg = crypto_shash_alg(tfm);
-
- memcpy(shash_desc_ctx(desc), in, crypto_shash_descsize(tfm));
-
- if (alg->reinit)
- alg->reinit(desc);
+ memcpy(out, shash_desc_ctx(desc), crypto_shash_descsize(desc->tfm));
+ return 0;
+}
+static int shash_default_import(struct shash_desc *desc, const void *in)
+{
+ memcpy(shash_desc_ctx(desc), in, crypto_shash_descsize(desc->tfm));
return 0;
}
-EXPORT_SYMBOL_GPL(crypto_shash_import);
static int shash_async_setkey(struct crypto_ahash *tfm, const u8 *key,
unsigned int keylen)
return crypto_shash_init(desc);
}
-static int shash_async_update(struct ahash_request *req)
+int shash_ahash_update(struct ahash_request *req, struct shash_desc *desc)
{
- struct shash_desc *desc = ahash_request_ctx(req);
struct crypto_hash_walk walk;
int nbytes;
return nbytes;
}
+EXPORT_SYMBOL_GPL(shash_ahash_update);
+
+static int shash_async_update(struct ahash_request *req)
+{
+ return shash_ahash_update(req, ahash_request_ctx(req));
+}
static int shash_async_final(struct ahash_request *req)
{
return crypto_shash_final(ahash_request_ctx(req), req->result);
}
-static int shash_async_digest(struct ahash_request *req)
+int shash_ahash_finup(struct ahash_request *req, struct shash_desc *desc)
+{
+ struct crypto_hash_walk walk;
+ int nbytes;
+
+ nbytes = crypto_hash_walk_first(req, &walk);
+ if (!nbytes)
+ return crypto_shash_final(desc, req->result);
+
+ do {
+ nbytes = crypto_hash_walk_last(&walk) ?
+ crypto_shash_finup(desc, walk.data, nbytes,
+ req->result) :
+ crypto_shash_update(desc, walk.data, nbytes);
+ nbytes = crypto_hash_walk_done(&walk, nbytes);
+ } while (nbytes > 0);
+
+ return nbytes;
+}
+EXPORT_SYMBOL_GPL(shash_ahash_finup);
+
+static int shash_async_finup(struct ahash_request *req)
+{
+ struct crypto_shash **ctx = crypto_ahash_ctx(crypto_ahash_reqtfm(req));
+ struct shash_desc *desc = ahash_request_ctx(req);
+
+ desc->tfm = *ctx;
+ desc->flags = req->base.flags;
+
+ return shash_ahash_finup(req, desc);
+}
+
+int shash_ahash_digest(struct ahash_request *req, struct shash_desc *desc)
{
struct scatterlist *sg = req->src;
unsigned int offset = sg->offset;
int err;
if (nbytes < min(sg->length, ((unsigned int)(PAGE_SIZE)) - offset)) {
- struct crypto_shash **ctx =
- crypto_ahash_ctx(crypto_ahash_reqtfm(req));
- struct shash_desc *desc = ahash_request_ctx(req);
void *data;
- desc->tfm = *ctx;
- desc->flags = req->base.flags;
-
data = crypto_kmap(sg_page(sg), 0);
err = crypto_shash_digest(desc, data + offset, nbytes,
req->result);
crypto_kunmap(data, 0);
crypto_yield(desc->flags);
- goto out;
- }
+ } else
+ err = crypto_shash_init(desc) ?:
+ shash_ahash_finup(req, desc);
- err = shash_async_init(req);
- if (err)
- goto out;
+ return err;
+}
+EXPORT_SYMBOL_GPL(shash_ahash_digest);
- err = shash_async_update(req);
- if (err)
- goto out;
+static int shash_async_digest(struct ahash_request *req)
+{
+ struct crypto_shash **ctx = crypto_ahash_ctx(crypto_ahash_reqtfm(req));
+ struct shash_desc *desc = ahash_request_ctx(req);
- err = shash_async_final(req);
+ desc->tfm = *ctx;
+ desc->flags = req->base.flags;
-out:
- return err;
+ return shash_ahash_digest(req, desc);
+}
+
+static int shash_async_export(struct ahash_request *req, void *out)
+{
+ return crypto_shash_export(ahash_request_ctx(req), out);
+}
+
+static int shash_async_import(struct ahash_request *req, const void *in)
+{
+ return crypto_shash_import(ahash_request_ctx(req), in);
}
static void crypto_exit_shash_ops_async(struct crypto_tfm *tfm)
crypto_free_shash(*ctx);
}
-static int crypto_init_shash_ops_async(struct crypto_tfm *tfm)
+int crypto_init_shash_ops_async(struct crypto_tfm *tfm)
{
struct crypto_alg *calg = tfm->__crt_alg;
struct shash_alg *alg = __crypto_shash_alg(calg);
- struct ahash_tfm *crt = &tfm->crt_ahash;
+ struct crypto_ahash *crt = __crypto_ahash_cast(tfm);
struct crypto_shash **ctx = crypto_tfm_ctx(tfm);
struct crypto_shash *shash;
crt->init = shash_async_init;
crt->update = shash_async_update;
- crt->final = shash_async_final;
+ crt->final = shash_async_final;
+ crt->finup = shash_async_finup;
crt->digest = shash_async_digest;
- crt->setkey = shash_async_setkey;
- crt->digestsize = alg->digestsize;
+ if (alg->setkey)
+ crt->setkey = shash_async_setkey;
+ if (alg->export)
+ crt->export = shash_async_export;
+ if (alg->import)
+ crt->import = shash_async_import;
+
crt->reqsize = sizeof(struct shash_desc) + crypto_shash_descsize(shash);
return 0;
static int shash_compat_setkey(struct crypto_hash *tfm, const u8 *key,
unsigned int keylen)
{
- struct shash_desc *desc = crypto_hash_ctx(tfm);
+ struct shash_desc **descp = crypto_hash_ctx(tfm);
+ struct shash_desc *desc = *descp;
return crypto_shash_setkey(desc->tfm, key, keylen);
}
static int shash_compat_init(struct hash_desc *hdesc)
{
- struct shash_desc *desc = crypto_hash_ctx(hdesc->tfm);
+ struct shash_desc **descp = crypto_hash_ctx(hdesc->tfm);
+ struct shash_desc *desc = *descp;
desc->flags = hdesc->flags;
static int shash_compat_update(struct hash_desc *hdesc, struct scatterlist *sg,
unsigned int len)
{
- struct shash_desc *desc = crypto_hash_ctx(hdesc->tfm);
+ struct shash_desc **descp = crypto_hash_ctx(hdesc->tfm);
+ struct shash_desc *desc = *descp;
struct crypto_hash_walk walk;
int nbytes;
static int shash_compat_final(struct hash_desc *hdesc, u8 *out)
{
- return crypto_shash_final(crypto_hash_ctx(hdesc->tfm), out);
+ struct shash_desc **descp = crypto_hash_ctx(hdesc->tfm);
+
+ return crypto_shash_final(*descp, out);
}
static int shash_compat_digest(struct hash_desc *hdesc, struct scatterlist *sg,
int err;
if (nbytes < min(sg->length, ((unsigned int)(PAGE_SIZE)) - offset)) {
- struct shash_desc *desc = crypto_hash_ctx(hdesc->tfm);
+ struct shash_desc **descp = crypto_hash_ctx(hdesc->tfm);
+ struct shash_desc *desc = *descp;
void *data;
desc->flags = hdesc->flags;
static void crypto_exit_shash_ops_compat(struct crypto_tfm *tfm)
{
- struct shash_desc *desc= crypto_tfm_ctx(tfm);
+ struct shash_desc **descp = crypto_tfm_ctx(tfm);
+ struct shash_desc *desc = *descp;
crypto_free_shash(desc->tfm);
+ kzfree(desc);
}
static int crypto_init_shash_ops_compat(struct crypto_tfm *tfm)
struct hash_tfm *crt = &tfm->crt_hash;
struct crypto_alg *calg = tfm->__crt_alg;
struct shash_alg *alg = __crypto_shash_alg(calg);
- struct shash_desc *desc = crypto_tfm_ctx(tfm);
+ struct shash_desc **descp = crypto_tfm_ctx(tfm);
struct crypto_shash *shash;
+ struct shash_desc *desc;
if (!crypto_mod_get(calg))
return -EAGAIN;
return PTR_ERR(shash);
}
+ desc = kmalloc(sizeof(*desc) + crypto_shash_descsize(shash),
+ GFP_KERNEL);
+ if (!desc) {
+ crypto_free_shash(shash);
+ return -ENOMEM;
+ }
+
+ *descp = desc;
desc->tfm = shash;
tfm->exit = crypto_exit_shash_ops_compat;
switch (mask & CRYPTO_ALG_TYPE_MASK) {
case CRYPTO_ALG_TYPE_HASH_MASK:
return crypto_init_shash_ops_compat(tfm);
- case CRYPTO_ALG_TYPE_AHASH_MASK:
- return crypto_init_shash_ops_async(tfm);
}
return -EINVAL;
static unsigned int crypto_shash_ctxsize(struct crypto_alg *alg, u32 type,
u32 mask)
{
- struct shash_alg *salg = __crypto_shash_alg(alg);
-
switch (mask & CRYPTO_ALG_TYPE_MASK) {
case CRYPTO_ALG_TYPE_HASH_MASK:
- return sizeof(struct shash_desc) + salg->descsize;
- case CRYPTO_ALG_TYPE_AHASH_MASK:
- return sizeof(struct crypto_shash *);
+ return sizeof(struct shash_desc *);
}
return 0;
}
-static int crypto_shash_init_tfm(struct crypto_tfm *tfm,
- const struct crypto_type *frontend)
+static int crypto_shash_init_tfm(struct crypto_tfm *tfm)
{
+ struct crypto_shash *hash = __crypto_shash_cast(tfm);
+
+ hash->descsize = crypto_shash_alg(hash)->descsize;
return 0;
}
-static unsigned int crypto_shash_extsize(struct crypto_alg *alg,
- const struct crypto_type *frontend)
+static unsigned int crypto_shash_extsize(struct crypto_alg *alg)
{
return alg->cra_ctxsize;
}
seq_printf(m, "type : shash\n");
seq_printf(m, "blocksize : %u\n", alg->cra_blocksize);
seq_printf(m, "digestsize : %u\n", salg->digestsize);
- seq_printf(m, "descsize : %u\n", salg->descsize);
}
static const struct crypto_type crypto_shash_type = {
}
EXPORT_SYMBOL_GPL(crypto_alloc_shash);
-int crypto_register_shash(struct shash_alg *alg)
+static int shash_prepare_alg(struct shash_alg *alg)
{
struct crypto_alg *base = &alg->base;
if (alg->digestsize > PAGE_SIZE / 8 ||
- alg->descsize > PAGE_SIZE / 8)
+ alg->descsize > PAGE_SIZE / 8 ||
+ alg->statesize > PAGE_SIZE / 8)
return -EINVAL;
base->cra_type = &crypto_shash_type;
base->cra_flags &= ~CRYPTO_ALG_TYPE_MASK;
base->cra_flags |= CRYPTO_ALG_TYPE_SHASH;
+ if (!alg->finup)
+ alg->finup = shash_finup_unaligned;
+ if (!alg->digest)
+ alg->digest = shash_digest_unaligned;
+ if (!alg->export) {
+ alg->export = shash_default_export;
+ alg->import = shash_default_import;
+ alg->statesize = alg->descsize;
+ }
+ if (!alg->setkey)
+ alg->setkey = shash_no_setkey;
+
+ return 0;
+}
+
+int crypto_register_shash(struct shash_alg *alg)
+{
+ struct crypto_alg *base = &alg->base;
+ int err;
+
+ err = shash_prepare_alg(alg);
+ if (err)
+ return err;
+
return crypto_register_alg(base);
}
EXPORT_SYMBOL_GPL(crypto_register_shash);
}
EXPORT_SYMBOL_GPL(crypto_unregister_shash);
+int shash_register_instance(struct crypto_template *tmpl,
+ struct shash_instance *inst)
+{
+ int err;
+
+ err = shash_prepare_alg(&inst->alg);
+ if (err)
+ return err;
+
+ return crypto_register_instance(tmpl, shash_crypto_instance(inst));
+}
+EXPORT_SYMBOL_GPL(shash_register_instance);
+
+void shash_free_instance(struct crypto_instance *inst)
+{
+ crypto_drop_spawn(crypto_instance_ctx(inst));
+ kfree(shash_instance(inst));
+}
+EXPORT_SYMBOL_GPL(shash_free_instance);
+
+int crypto_init_shash_spawn(struct crypto_shash_spawn *spawn,
+ struct shash_alg *alg,
+ struct crypto_instance *inst)
+{
+ return crypto_init_spawn2(&spawn->base, &alg->base, inst,
+ &crypto_shash_type);
+}
+EXPORT_SYMBOL_GPL(crypto_init_shash_spawn);
+
+struct shash_alg *shash_attr_alg(struct rtattr *rta, u32 type, u32 mask)
+{
+ struct crypto_alg *alg;
+
+ alg = crypto_attr_alg2(rta, &crypto_shash_type, type, mask);
+ return IS_ERR(alg) ? ERR_CAST(alg) :
+ container_of(alg, struct shash_alg, base);
+}
+EXPORT_SYMBOL_GPL(shash_attr_alg);
+
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Synchronous cryptographic hash type");
*/
static unsigned int sec;
+static char *alg = NULL;
+static u32 type;
+static u32 mask;
static int mode;
static char *tvmem[TVMEMSIZE];
ret += tcrypt_test("hmac(rmd160)");
break;
+ case 109:
+ ret += tcrypt_test("vmac(aes)");
+ break;
+
case 150:
ret += tcrypt_test("ansi_cprng");
break;
return ret;
}
+static int do_alg_test(const char *alg, u32 type, u32 mask)
+{
+ return crypto_has_alg(alg, type, mask ?: CRYPTO_ALG_TYPE_MASK) ?
+ 0 : -ENOENT;
+}
+
static int __init tcrypt_mod_init(void)
{
int err = -ENOMEM;
goto err_free_tv;
}
- err = do_test(mode);
+ if (alg)
+ err = do_alg_test(alg, type, mask);
+ else
+ err = do_test(mode);
+
if (err) {
printk(KERN_ERR "tcrypt: one or more tests failed!\n");
goto err_free_tv;
module_init(tcrypt_mod_init);
module_exit(tcrypt_mod_fini);
+module_param(alg, charp, 0);
+module_param(type, uint, 0);
+module_param(mask, uint, 0);
module_param(mode, int, 0);
module_param(sec, uint, 0);
MODULE_PARM_DESC(sec, "Length in seconds of speed tests "
hash_buff = xbuf[0];
- ret = -EINVAL;
- if (WARN_ON(template[i].psize > PAGE_SIZE))
- goto out;
-
memcpy(hash_buff, template[i].plaintext, template[i].psize);
sg_init_one(&sg[0], hash_buff, template[i].psize);
.count = TGR192_TEST_VECTORS
}
}
+ }, {
+ .alg = "vmac(aes)",
+ .test = alg_test_hash,
+ .suite = {
+ .hash = {
+ .vecs = aes_vmac128_tv_template,
+ .count = VMAC_AES_TEST_VECTORS
+ }
+ }
}, {
.alg = "wp256",
.test = alg_test_hash,
int alg_test(const char *driver, const char *alg, u32 type, u32 mask)
{
int i;
+ int j;
int rc;
if ((type & CRYPTO_ALG_TYPE_MASK) == CRYPTO_ALG_TYPE_CIPHER) {
}
i = alg_find_test(alg);
- if (i < 0)
+ j = alg_find_test(driver);
+ if (i < 0 && j < 0)
goto notest;
- if (fips_enabled && !alg_test_descs[i].fips_allowed)
+ if (fips_enabled && ((i >= 0 && !alg_test_descs[i].fips_allowed) ||
+ (j >= 0 && !alg_test_descs[j].fips_allowed)))
goto non_fips_alg;
- rc = alg_test_descs[i].test(alg_test_descs + i, driver,
- type, mask);
+ rc = 0;
+ if (i >= 0)
+ rc |= alg_test_descs[i].test(alg_test_descs + i, driver,
+ type, mask);
+ if (j >= 0)
+ rc |= alg_test_descs[j].test(alg_test_descs + j, driver,
+ type, mask);
+
test_done:
if (fips_enabled && rc)
panic("%s: %s alg self test failed in fips mode!\n", driver, alg);
}
};
+#define VMAC_AES_TEST_VECTORS 1
+static char vmac_string[128] = {'\x01', '\x01', '\x01', '\x01',
+ '\x02', '\x03', '\x02', '\x02',
+ '\x02', '\x04', '\x01', '\x07',
+ '\x04', '\x01', '\x04', '\x03',};
+static struct hash_testvec aes_vmac128_tv_template[] = {
+ {
+ .key = "\x00\x01\x02\x03\x04\x05\x06\x07"
+ "\x08\x09\x0a\x0b\x0c\x0d\x0e\x0f",
+ .plaintext = vmac_string,
+ .digest = "\xcb\xd7\x8a\xfd\xb7\x33\x79\xe7",
+ .psize = 128,
+ .ksize = 16,
+ },
+};
+
/*
* SHA384 HMAC test vectors from RFC4231
*/
--- /dev/null
+/*
+ * Modified to interface to the Linux kernel
+ * Copyright (c) 2009, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ */
+
+/* --------------------------------------------------------------------------
+ * VMAC and VHASH Implementation by Ted Krovetz (tdk@acm.org) and Wei Dai.
+ * This implementation is herby placed in the public domain.
+ * The authors offers no warranty. Use at your own risk.
+ * Please send bug reports to the authors.
+ * Last modified: 17 APR 08, 1700 PDT
+ * ----------------------------------------------------------------------- */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/crypto.h>
+#include <linux/scatterlist.h>
+#include <asm/byteorder.h>
+#include <crypto/scatterwalk.h>
+#include <crypto/vmac.h>
+#include <crypto/internal/hash.h>
+
+/*
+ * Constants and masks
+ */
+#define UINT64_C(x) x##ULL
+const u64 p64 = UINT64_C(0xfffffffffffffeff); /* 2^64 - 257 prime */
+const u64 m62 = UINT64_C(0x3fffffffffffffff); /* 62-bit mask */
+const u64 m63 = UINT64_C(0x7fffffffffffffff); /* 63-bit mask */
+const u64 m64 = UINT64_C(0xffffffffffffffff); /* 64-bit mask */
+const u64 mpoly = UINT64_C(0x1fffffff1fffffff); /* Poly key mask */
+
+#ifdef __LITTLE_ENDIAN
+#define INDEX_HIGH 1
+#define INDEX_LOW 0
+#else
+#define INDEX_HIGH 0
+#define INDEX_LOW 1
+#endif
+
+/*
+ * The following routines are used in this implementation. They are
+ * written via macros to simulate zero-overhead call-by-reference.
+ *
+ * MUL64: 64x64->128-bit multiplication
+ * PMUL64: assumes top bits cleared on inputs
+ * ADD128: 128x128->128-bit addition
+ */
+
+#define ADD128(rh, rl, ih, il) \
+ do { \
+ u64 _il = (il); \
+ (rl) += (_il); \
+ if ((rl) < (_il)) \
+ (rh)++; \
+ (rh) += (ih); \
+ } while (0)
+
+#define MUL32(i1, i2) ((u64)(u32)(i1)*(u32)(i2))
+
+#define PMUL64(rh, rl, i1, i2) /* Assumes m doesn't overflow */ \
+ do { \
+ u64 _i1 = (i1), _i2 = (i2); \
+ u64 m = MUL32(_i1, _i2>>32) + MUL32(_i1>>32, _i2); \
+ rh = MUL32(_i1>>32, _i2>>32); \
+ rl = MUL32(_i1, _i2); \
+ ADD128(rh, rl, (m >> 32), (m << 32)); \
+ } while (0)
+
+#define MUL64(rh, rl, i1, i2) \
+ do { \
+ u64 _i1 = (i1), _i2 = (i2); \
+ u64 m1 = MUL32(_i1, _i2>>32); \
+ u64 m2 = MUL32(_i1>>32, _i2); \
+ rh = MUL32(_i1>>32, _i2>>32); \
+ rl = MUL32(_i1, _i2); \
+ ADD128(rh, rl, (m1 >> 32), (m1 << 32)); \
+ ADD128(rh, rl, (m2 >> 32), (m2 << 32)); \
+ } while (0)
+
+/*
+ * For highest performance the L1 NH and L2 polynomial hashes should be
+ * carefully implemented to take advantage of one's target architechture.
+ * Here these two hash functions are defined multiple time; once for
+ * 64-bit architectures, once for 32-bit SSE2 architectures, and once
+ * for the rest (32-bit) architectures.
+ * For each, nh_16 *must* be defined (works on multiples of 16 bytes).
+ * Optionally, nh_vmac_nhbytes can be defined (for multiples of
+ * VMAC_NHBYTES), and nh_16_2 and nh_vmac_nhbytes_2 (versions that do two
+ * NH computations at once).
+ */
+
+#ifdef CONFIG_64BIT
+
+#define nh_16(mp, kp, nw, rh, rl) \
+ do { \
+ int i; u64 th, tl; \
+ rh = rl = 0; \
+ for (i = 0; i < nw; i += 2) { \
+ MUL64(th, tl, le64_to_cpup((mp)+i)+(kp)[i], \
+ le64_to_cpup((mp)+i+1)+(kp)[i+1]); \
+ ADD128(rh, rl, th, tl); \
+ } \
+ } while (0)
+
+#define nh_16_2(mp, kp, nw, rh, rl, rh1, rl1) \
+ do { \
+ int i; u64 th, tl; \
+ rh1 = rl1 = rh = rl = 0; \
+ for (i = 0; i < nw; i += 2) { \
+ MUL64(th, tl, le64_to_cpup((mp)+i)+(kp)[i], \
+ le64_to_cpup((mp)+i+1)+(kp)[i+1]); \
+ ADD128(rh, rl, th, tl); \
+ MUL64(th, tl, le64_to_cpup((mp)+i)+(kp)[i+2], \
+ le64_to_cpup((mp)+i+1)+(kp)[i+3]); \
+ ADD128(rh1, rl1, th, tl); \
+ } \
+ } while (0)
+
+#if (VMAC_NHBYTES >= 64) /* These versions do 64-bytes of message at a time */
+#define nh_vmac_nhbytes(mp, kp, nw, rh, rl) \
+ do { \
+ int i; u64 th, tl; \
+ rh = rl = 0; \
+ for (i = 0; i < nw; i += 8) { \
+ MUL64(th, tl, le64_to_cpup((mp)+i)+(kp)[i], \
+ le64_to_cpup((mp)+i+1)+(kp)[i+1]); \
+ ADD128(rh, rl, th, tl); \
+ MUL64(th, tl, le64_to_cpup((mp)+i+2)+(kp)[i+2], \
+ le64_to_cpup((mp)+i+3)+(kp)[i+3]); \
+ ADD128(rh, rl, th, tl); \
+ MUL64(th, tl, le64_to_cpup((mp)+i+4)+(kp)[i+4], \
+ le64_to_cpup((mp)+i+5)+(kp)[i+5]); \
+ ADD128(rh, rl, th, tl); \
+ MUL64(th, tl, le64_to_cpup((mp)+i+6)+(kp)[i+6], \
+ le64_to_cpup((mp)+i+7)+(kp)[i+7]); \
+ ADD128(rh, rl, th, tl); \
+ } \
+ } while (0)
+
+#define nh_vmac_nhbytes_2(mp, kp, nw, rh, rl, rh1, rl1) \
+ do { \
+ int i; u64 th, tl; \
+ rh1 = rl1 = rh = rl = 0; \
+ for (i = 0; i < nw; i += 8) { \
+ MUL64(th, tl, le64_to_cpup((mp)+i)+(kp)[i], \
+ le64_to_cpup((mp)+i+1)+(kp)[i+1]); \
+ ADD128(rh, rl, th, tl); \
+ MUL64(th, tl, le64_to_cpup((mp)+i)+(kp)[i+2], \
+ le64_to_cpup((mp)+i+1)+(kp)[i+3]); \
+ ADD128(rh1, rl1, th, tl); \
+ MUL64(th, tl, le64_to_cpup((mp)+i+2)+(kp)[i+2], \
+ le64_to_cpup((mp)+i+3)+(kp)[i+3]); \
+ ADD128(rh, rl, th, tl); \
+ MUL64(th, tl, le64_to_cpup((mp)+i+2)+(kp)[i+4], \
+ le64_to_cpup((mp)+i+3)+(kp)[i+5]); \
+ ADD128(rh1, rl1, th, tl); \
+ MUL64(th, tl, le64_to_cpup((mp)+i+4)+(kp)[i+4], \
+ le64_to_cpup((mp)+i+5)+(kp)[i+5]); \
+ ADD128(rh, rl, th, tl); \
+ MUL64(th, tl, le64_to_cpup((mp)+i+4)+(kp)[i+6], \
+ le64_to_cpup((mp)+i+5)+(kp)[i+7]); \
+ ADD128(rh1, rl1, th, tl); \
+ MUL64(th, tl, le64_to_cpup((mp)+i+6)+(kp)[i+6], \
+ le64_to_cpup((mp)+i+7)+(kp)[i+7]); \
+ ADD128(rh, rl, th, tl); \
+ MUL64(th, tl, le64_to_cpup((mp)+i+6)+(kp)[i+8], \
+ le64_to_cpup((mp)+i+7)+(kp)[i+9]); \
+ ADD128(rh1, rl1, th, tl); \
+ } \
+ } while (0)
+#endif
+
+#define poly_step(ah, al, kh, kl, mh, ml) \
+ do { \
+ u64 t1h, t1l, t2h, t2l, t3h, t3l, z = 0; \
+ /* compute ab*cd, put bd into result registers */ \
+ PMUL64(t3h, t3l, al, kh); \
+ PMUL64(t2h, t2l, ah, kl); \
+ PMUL64(t1h, t1l, ah, 2*kh); \
+ PMUL64(ah, al, al, kl); \
+ /* add 2 * ac to result */ \
+ ADD128(ah, al, t1h, t1l); \
+ /* add together ad + bc */ \
+ ADD128(t2h, t2l, t3h, t3l); \
+ /* now (ah,al), (t2l,2*t2h) need summing */ \
+ /* first add the high registers, carrying into t2h */ \
+ ADD128(t2h, ah, z, t2l); \
+ /* double t2h and add top bit of ah */ \
+ t2h = 2 * t2h + (ah >> 63); \
+ ah &= m63; \
+ /* now add the low registers */ \
+ ADD128(ah, al, mh, ml); \
+ ADD128(ah, al, z, t2h); \
+ } while (0)
+
+#else /* ! CONFIG_64BIT */
+
+#ifndef nh_16
+#define nh_16(mp, kp, nw, rh, rl) \
+ do { \
+ u64 t1, t2, m1, m2, t; \
+ int i; \
+ rh = rl = t = 0; \
+ for (i = 0; i < nw; i += 2) { \
+ t1 = le64_to_cpup(mp+i) + kp[i]; \
+ t2 = le64_to_cpup(mp+i+1) + kp[i+1]; \
+ m2 = MUL32(t1 >> 32, t2); \
+ m1 = MUL32(t1, t2 >> 32); \
+ ADD128(rh, rl, MUL32(t1 >> 32, t2 >> 32), \
+ MUL32(t1, t2)); \
+ rh += (u64)(u32)(m1 >> 32) \
+ + (u32)(m2 >> 32); \
+ t += (u64)(u32)m1 + (u32)m2; \
+ } \
+ ADD128(rh, rl, (t >> 32), (t << 32)); \
+ } while (0)
+#endif
+
+static void poly_step_func(u64 *ahi, u64 *alo,
+ const u64 *kh, const u64 *kl,
+ const u64 *mh, const u64 *ml)
+{
+#define a0 (*(((u32 *)alo)+INDEX_LOW))
+#define a1 (*(((u32 *)alo)+INDEX_HIGH))
+#define a2 (*(((u32 *)ahi)+INDEX_LOW))
+#define a3 (*(((u32 *)ahi)+INDEX_HIGH))
+#define k0 (*(((u32 *)kl)+INDEX_LOW))
+#define k1 (*(((u32 *)kl)+INDEX_HIGH))
+#define k2 (*(((u32 *)kh)+INDEX_LOW))
+#define k3 (*(((u32 *)kh)+INDEX_HIGH))
+
+ u64 p, q, t;
+ u32 t2;
+
+ p = MUL32(a3, k3);
+ p += p;
+ p += *(u64 *)mh;
+ p += MUL32(a0, k2);
+ p += MUL32(a1, k1);
+ p += MUL32(a2, k0);
+ t = (u32)(p);
+ p >>= 32;
+ p += MUL32(a0, k3);
+ p += MUL32(a1, k2);
+ p += MUL32(a2, k1);
+ p += MUL32(a3, k0);
+ t |= ((u64)((u32)p & 0x7fffffff)) << 32;
+ p >>= 31;
+ p += (u64)(((u32 *)ml)[INDEX_LOW]);
+ p += MUL32(a0, k0);
+ q = MUL32(a1, k3);
+ q += MUL32(a2, k2);
+ q += MUL32(a3, k1);
+ q += q;
+ p += q;
+ t2 = (u32)(p);
+ p >>= 32;
+ p += (u64)(((u32 *)ml)[INDEX_HIGH]);
+ p += MUL32(a0, k1);
+ p += MUL32(a1, k0);
+ q = MUL32(a2, k3);
+ q += MUL32(a3, k2);
+ q += q;
+ p += q;
+ *(u64 *)(alo) = (p << 32) | t2;
+ p >>= 32;
+ *(u64 *)(ahi) = p + t;
+
+#undef a0
+#undef a1
+#undef a2
+#undef a3
+#undef k0
+#undef k1
+#undef k2
+#undef k3
+}
+
+#define poly_step(ah, al, kh, kl, mh, ml) \
+ poly_step_func(&(ah), &(al), &(kh), &(kl), &(mh), &(ml))
+
+#endif /* end of specialized NH and poly definitions */
+
+/* At least nh_16 is defined. Defined others as needed here */
+#ifndef nh_16_2
+#define nh_16_2(mp, kp, nw, rh, rl, rh2, rl2) \
+ do { \
+ nh_16(mp, kp, nw, rh, rl); \
+ nh_16(mp, ((kp)+2), nw, rh2, rl2); \
+ } while (0)
+#endif
+#ifndef nh_vmac_nhbytes
+#define nh_vmac_nhbytes(mp, kp, nw, rh, rl) \
+ nh_16(mp, kp, nw, rh, rl)
+#endif
+#ifndef nh_vmac_nhbytes_2
+#define nh_vmac_nhbytes_2(mp, kp, nw, rh, rl, rh2, rl2) \
+ do { \
+ nh_vmac_nhbytes(mp, kp, nw, rh, rl); \
+ nh_vmac_nhbytes(mp, ((kp)+2), nw, rh2, rl2); \
+ } while (0)
+#endif
+
+static void vhash_abort(struct vmac_ctx *ctx)
+{
+ ctx->polytmp[0] = ctx->polykey[0] ;
+ ctx->polytmp[1] = ctx->polykey[1] ;
+ ctx->first_block_processed = 0;
+}
+
+static u64 l3hash(u64 p1, u64 p2,
+ u64 k1, u64 k2, u64 len)
+{
+ u64 rh, rl, t, z = 0;
+
+ /* fully reduce (p1,p2)+(len,0) mod p127 */
+ t = p1 >> 63;
+ p1 &= m63;
+ ADD128(p1, p2, len, t);
+ /* At this point, (p1,p2) is at most 2^127+(len<<64) */
+ t = (p1 > m63) + ((p1 == m63) && (p2 == m64));
+ ADD128(p1, p2, z, t);
+ p1 &= m63;
+
+ /* compute (p1,p2)/(2^64-2^32) and (p1,p2)%(2^64-2^32) */
+ t = p1 + (p2 >> 32);
+ t += (t >> 32);
+ t += (u32)t > 0xfffffffeu;
+ p1 += (t >> 32);
+ p2 += (p1 << 32);
+
+ /* compute (p1+k1)%p64 and (p2+k2)%p64 */
+ p1 += k1;
+ p1 += (0 - (p1 < k1)) & 257;
+ p2 += k2;
+ p2 += (0 - (p2 < k2)) & 257;
+
+ /* compute (p1+k1)*(p2+k2)%p64 */
+ MUL64(rh, rl, p1, p2);
+ t = rh >> 56;
+ ADD128(t, rl, z, rh);
+ rh <<= 8;
+ ADD128(t, rl, z, rh);
+ t += t << 8;
+ rl += t;
+ rl += (0 - (rl < t)) & 257;
+ rl += (0 - (rl > p64-1)) & 257;
+ return rl;
+}
+
+static void vhash_update(const unsigned char *m,
+ unsigned int mbytes, /* Pos multiple of VMAC_NHBYTES */
+ struct vmac_ctx *ctx)
+{
+ u64 rh, rl, *mptr;
+ const u64 *kptr = (u64 *)ctx->nhkey;
+ int i;
+ u64 ch, cl;
+ u64 pkh = ctx->polykey[0];
+ u64 pkl = ctx->polykey[1];
+
+ mptr = (u64 *)m;
+ i = mbytes / VMAC_NHBYTES; /* Must be non-zero */
+
+ ch = ctx->polytmp[0];
+ cl = ctx->polytmp[1];
+
+ if (!ctx->first_block_processed) {
+ ctx->first_block_processed = 1;
+ nh_vmac_nhbytes(mptr, kptr, VMAC_NHBYTES/8, rh, rl);
+ rh &= m62;
+ ADD128(ch, cl, rh, rl);
+ mptr += (VMAC_NHBYTES/sizeof(u64));
+ i--;
+ }
+
+ while (i--) {
+ nh_vmac_nhbytes(mptr, kptr, VMAC_NHBYTES/8, rh, rl);
+ rh &= m62;
+ poly_step(ch, cl, pkh, pkl, rh, rl);
+ mptr += (VMAC_NHBYTES/sizeof(u64));
+ }
+
+ ctx->polytmp[0] = ch;
+ ctx->polytmp[1] = cl;
+}
+
+static u64 vhash(unsigned char m[], unsigned int mbytes,
+ u64 *tagl, struct vmac_ctx *ctx)
+{
+ u64 rh, rl, *mptr;
+ const u64 *kptr = (u64 *)ctx->nhkey;
+ int i, remaining;
+ u64 ch, cl;
+ u64 pkh = ctx->polykey[0];
+ u64 pkl = ctx->polykey[1];
+
+ mptr = (u64 *)m;
+ i = mbytes / VMAC_NHBYTES;
+ remaining = mbytes % VMAC_NHBYTES;
+
+ if (ctx->first_block_processed) {
+ ch = ctx->polytmp[0];
+ cl = ctx->polytmp[1];
+ } else if (i) {
+ nh_vmac_nhbytes(mptr, kptr, VMAC_NHBYTES/8, ch, cl);
+ ch &= m62;
+ ADD128(ch, cl, pkh, pkl);
+ mptr += (VMAC_NHBYTES/sizeof(u64));
+ i--;
+ } else if (remaining) {
+ nh_16(mptr, kptr, 2*((remaining+15)/16), ch, cl);
+ ch &= m62;
+ ADD128(ch, cl, pkh, pkl);
+ mptr += (VMAC_NHBYTES/sizeof(u64));
+ goto do_l3;
+ } else {/* Empty String */
+ ch = pkh; cl = pkl;
+ goto do_l3;
+ }
+
+ while (i--) {
+ nh_vmac_nhbytes(mptr, kptr, VMAC_NHBYTES/8, rh, rl);
+ rh &= m62;
+ poly_step(ch, cl, pkh, pkl, rh, rl);
+ mptr += (VMAC_NHBYTES/sizeof(u64));
+ }
+ if (remaining) {
+ nh_16(mptr, kptr, 2*((remaining+15)/16), rh, rl);
+ rh &= m62;
+ poly_step(ch, cl, pkh, pkl, rh, rl);
+ }
+
+do_l3:
+ vhash_abort(ctx);
+ remaining *= 8;
+ return l3hash(ch, cl, ctx->l3key[0], ctx->l3key[1], remaining);
+}
+
+static u64 vmac(unsigned char m[], unsigned int mbytes,
+ unsigned char n[16], u64 *tagl,
+ struct vmac_ctx_t *ctx)
+{
+ u64 *in_n, *out_p;
+ u64 p, h;
+ int i;
+
+ in_n = ctx->__vmac_ctx.cached_nonce;
+ out_p = ctx->__vmac_ctx.cached_aes;
+
+ i = n[15] & 1;
+ if ((*(u64 *)(n+8) != in_n[1]) || (*(u64 *)(n) != in_n[0])) {
+ in_n[0] = *(u64 *)(n);
+ in_n[1] = *(u64 *)(n+8);
+ ((unsigned char *)in_n)[15] &= 0xFE;
+ crypto_cipher_encrypt_one(ctx->child,
+ (unsigned char *)out_p, (unsigned char *)in_n);
+
+ ((unsigned char *)in_n)[15] |= (unsigned char)(1-i);
+ }
+ p = be64_to_cpup(out_p + i);
+ h = vhash(m, mbytes, (u64 *)0, &ctx->__vmac_ctx);
+ return p + h;
+}
+
+static int vmac_set_key(unsigned char user_key[], struct vmac_ctx_t *ctx)
+{
+ u64 in[2] = {0}, out[2];
+ unsigned i;
+ int err = 0;
+
+ err = crypto_cipher_setkey(ctx->child, user_key, VMAC_KEY_LEN);
+ if (err)
+ return err;
+
+ /* Fill nh key */
+ ((unsigned char *)in)[0] = 0x80;
+ for (i = 0; i < sizeof(ctx->__vmac_ctx.nhkey)/8; i += 2) {
+ crypto_cipher_encrypt_one(ctx->child,
+ (unsigned char *)out, (unsigned char *)in);
+ ctx->__vmac_ctx.nhkey[i] = be64_to_cpup(out);
+ ctx->__vmac_ctx.nhkey[i+1] = be64_to_cpup(out+1);
+ ((unsigned char *)in)[15] += 1;
+ }
+
+ /* Fill poly key */
+ ((unsigned char *)in)[0] = 0xC0;
+ in[1] = 0;
+ for (i = 0; i < sizeof(ctx->__vmac_ctx.polykey)/8; i += 2) {
+ crypto_cipher_encrypt_one(ctx->child,
+ (unsigned char *)out, (unsigned char *)in);
+ ctx->__vmac_ctx.polytmp[i] =
+ ctx->__vmac_ctx.polykey[i] =
+ be64_to_cpup(out) & mpoly;
+ ctx->__vmac_ctx.polytmp[i+1] =
+ ctx->__vmac_ctx.polykey[i+1] =
+ be64_to_cpup(out+1) & mpoly;
+ ((unsigned char *)in)[15] += 1;
+ }
+
+ /* Fill ip key */
+ ((unsigned char *)in)[0] = 0xE0;
+ in[1] = 0;
+ for (i = 0; i < sizeof(ctx->__vmac_ctx.l3key)/8; i += 2) {
+ do {
+ crypto_cipher_encrypt_one(ctx->child,
+ (unsigned char *)out, (unsigned char *)in);
+ ctx->__vmac_ctx.l3key[i] = be64_to_cpup(out);
+ ctx->__vmac_ctx.l3key[i+1] = be64_to_cpup(out+1);
+ ((unsigned char *)in)[15] += 1;
+ } while (ctx->__vmac_ctx.l3key[i] >= p64
+ || ctx->__vmac_ctx.l3key[i+1] >= p64);
+ }
+
+ /* Invalidate nonce/aes cache and reset other elements */
+ ctx->__vmac_ctx.cached_nonce[0] = (u64)-1; /* Ensure illegal nonce */
+ ctx->__vmac_ctx.cached_nonce[1] = (u64)0; /* Ensure illegal nonce */
+ ctx->__vmac_ctx.first_block_processed = 0;
+
+ return err;
+}
+
+static int vmac_setkey(struct crypto_shash *parent,
+ const u8 *key, unsigned int keylen)
+{
+ struct vmac_ctx_t *ctx = crypto_shash_ctx(parent);
+
+ if (keylen != VMAC_KEY_LEN) {
+ crypto_shash_set_flags(parent, CRYPTO_TFM_RES_BAD_KEY_LEN);
+ return -EINVAL;
+ }
+
+ return vmac_set_key((u8 *)key, ctx);
+}
+
+static int vmac_init(struct shash_desc *pdesc)
+{
+ struct crypto_shash *parent = pdesc->tfm;
+ struct vmac_ctx_t *ctx = crypto_shash_ctx(parent);
+
+ memset(&ctx->__vmac_ctx, 0, sizeof(struct vmac_ctx));
+ return 0;
+}
+
+static int vmac_update(struct shash_desc *pdesc, const u8 *p,
+ unsigned int len)
+{
+ struct crypto_shash *parent = pdesc->tfm;
+ struct vmac_ctx_t *ctx = crypto_shash_ctx(parent);
+
+ vhash_update(p, len, &ctx->__vmac_ctx);
+
+ return 0;
+}
+
+static int vmac_final(struct shash_desc *pdesc, u8 *out)
+{
+ struct crypto_shash *parent = pdesc->tfm;
+ struct vmac_ctx_t *ctx = crypto_shash_ctx(parent);
+ vmac_t mac;
+ u8 nonce[16] = {};
+
+ mac = vmac(NULL, 0, nonce, NULL, ctx);
+ memcpy(out, &mac, sizeof(vmac_t));
+ memset(&mac, 0, sizeof(vmac_t));
+ memset(&ctx->__vmac_ctx, 0, sizeof(struct vmac_ctx));
+ return 0;
+}
+
+static int vmac_init_tfm(struct crypto_tfm *tfm)
+{
+ struct crypto_cipher *cipher;
+ struct crypto_instance *inst = (void *)tfm->__crt_alg;
+ struct crypto_spawn *spawn = crypto_instance_ctx(inst);
+ struct vmac_ctx_t *ctx = crypto_tfm_ctx(tfm);
+
+ cipher = crypto_spawn_cipher(spawn);
+ if (IS_ERR(cipher))
+ return PTR_ERR(cipher);
+
+ ctx->child = cipher;
+ return 0;
+}
+
+static void vmac_exit_tfm(struct crypto_tfm *tfm)
+{
+ struct vmac_ctx_t *ctx = crypto_tfm_ctx(tfm);
+ crypto_free_cipher(ctx->child);
+}
+
+static int vmac_create(struct crypto_template *tmpl, struct rtattr **tb)
+{
+ struct shash_instance *inst;
+ struct crypto_alg *alg;
+ int err;
+
+ err = crypto_check_attr_type(tb, CRYPTO_ALG_TYPE_SHASH);
+ if (err)
+ return err;
+
+ alg = crypto_get_attr_alg(tb, CRYPTO_ALG_TYPE_CIPHER,
+ CRYPTO_ALG_TYPE_MASK);
+ if (IS_ERR(alg))
+ return PTR_ERR(alg);
+
+ inst = shash_alloc_instance("vmac", alg);
+ err = PTR_ERR(inst);
+ if (IS_ERR(inst))
+ goto out_put_alg;
+
+ err = crypto_init_spawn(shash_instance_ctx(inst), alg,
+ shash_crypto_instance(inst),
+ CRYPTO_ALG_TYPE_MASK);
+ if (err)
+ goto out_free_inst;
+
+ inst->alg.base.cra_priority = alg->cra_priority;
+ inst->alg.base.cra_blocksize = alg->cra_blocksize;
+ inst->alg.base.cra_alignmask = alg->cra_alignmask;
+
+ inst->alg.digestsize = sizeof(vmac_t);
+ inst->alg.base.cra_ctxsize = sizeof(struct vmac_ctx_t);
+ inst->alg.base.cra_init = vmac_init_tfm;
+ inst->alg.base.cra_exit = vmac_exit_tfm;
+
+ inst->alg.init = vmac_init;
+ inst->alg.update = vmac_update;
+ inst->alg.final = vmac_final;
+ inst->alg.setkey = vmac_setkey;
+
+ err = shash_register_instance(tmpl, inst);
+ if (err) {
+out_free_inst:
+ shash_free_instance(shash_crypto_instance(inst));
+ }
+
+out_put_alg:
+ crypto_mod_put(alg);
+ return err;
+}
+
+static struct crypto_template vmac_tmpl = {
+ .name = "vmac",
+ .create = vmac_create,
+ .free = shash_free_instance,
+ .module = THIS_MODULE,
+};
+
+static int __init vmac_module_init(void)
+{
+ return crypto_register_template(&vmac_tmpl);
+}
+
+static void __exit vmac_module_exit(void)
+{
+ crypto_unregister_template(&vmac_tmpl);
+}
+
+module_init(vmac_module_init);
+module_exit(vmac_module_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("VMAC hash algorithm");
+
* Kazunori Miyazawa <miyazawa@linux-ipv6.org>
*/
-#include <crypto/scatterwalk.h>
-#include <linux/crypto.h>
+#include <crypto/internal/hash.h>
#include <linux/err.h>
-#include <linux/hardirq.h>
#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/rtnetlink.h>
-#include <linux/slab.h>
-#include <linux/scatterlist.h>
static u_int32_t ks[12] = {0x01010101, 0x01010101, 0x01010101, 0x01010101,
0x02020202, 0x02020202, 0x02020202, 0x02020202,
0x03030303, 0x03030303, 0x03030303, 0x03030303};
+
/*
* +------------------------
* | <parent tfm>
* +------------------------
- * | crypto_xcbc_ctx
+ * | xcbc_tfm_ctx
* +------------------------
- * | odds (block size)
+ * | consts (block size * 2)
* +------------------------
- * | prev (block size)
+ */
+struct xcbc_tfm_ctx {
+ struct crypto_cipher *child;
+ u8 ctx[];
+};
+
+/*
* +------------------------
- * | key (block size)
+ * | <shash desc>
* +------------------------
- * | consts (block size * 3)
+ * | xcbc_desc_ctx
+ * +------------------------
+ * | odds (block size)
+ * +------------------------
+ * | prev (block size)
* +------------------------
*/
-struct crypto_xcbc_ctx {
- struct crypto_cipher *child;
- u8 *odds;
- u8 *prev;
- u8 *key;
- u8 *consts;
- void (*xor)(u8 *a, const u8 *b, unsigned int bs);
- unsigned int keylen;
+struct xcbc_desc_ctx {
unsigned int len;
+ u8 ctx[];
};
-static void xor_128(u8 *a, const u8 *b, unsigned int bs)
-{
- ((u32 *)a)[0] ^= ((u32 *)b)[0];
- ((u32 *)a)[1] ^= ((u32 *)b)[1];
- ((u32 *)a)[2] ^= ((u32 *)b)[2];
- ((u32 *)a)[3] ^= ((u32 *)b)[3];
-}
-
-static int _crypto_xcbc_digest_setkey(struct crypto_hash *parent,
- struct crypto_xcbc_ctx *ctx)
+static int crypto_xcbc_digest_setkey(struct crypto_shash *parent,
+ const u8 *inkey, unsigned int keylen)
{
- int bs = crypto_hash_blocksize(parent);
+ unsigned long alignmask = crypto_shash_alignmask(parent);
+ struct xcbc_tfm_ctx *ctx = crypto_shash_ctx(parent);
+ int bs = crypto_shash_blocksize(parent);
+ u8 *consts = PTR_ALIGN(&ctx->ctx[0], alignmask + 1);
int err = 0;
u8 key1[bs];
- if ((err = crypto_cipher_setkey(ctx->child, ctx->key, ctx->keylen)))
- return err;
+ if ((err = crypto_cipher_setkey(ctx->child, inkey, keylen)))
+ return err;
- crypto_cipher_encrypt_one(ctx->child, key1, ctx->consts);
+ crypto_cipher_encrypt_one(ctx->child, consts, (u8 *)ks + bs);
+ crypto_cipher_encrypt_one(ctx->child, consts + bs, (u8 *)ks + bs * 2);
+ crypto_cipher_encrypt_one(ctx->child, key1, (u8 *)ks);
return crypto_cipher_setkey(ctx->child, key1, bs);
-}
-
-static int crypto_xcbc_digest_setkey(struct crypto_hash *parent,
- const u8 *inkey, unsigned int keylen)
-{
- struct crypto_xcbc_ctx *ctx = crypto_hash_ctx_aligned(parent);
-
- if (keylen != crypto_cipher_blocksize(ctx->child))
- return -EINVAL;
- ctx->keylen = keylen;
- memcpy(ctx->key, inkey, keylen);
- ctx->consts = (u8*)ks;
-
- return _crypto_xcbc_digest_setkey(parent, ctx);
}
-static int crypto_xcbc_digest_init(struct hash_desc *pdesc)
+static int crypto_xcbc_digest_init(struct shash_desc *pdesc)
{
- struct crypto_xcbc_ctx *ctx = crypto_hash_ctx_aligned(pdesc->tfm);
- int bs = crypto_hash_blocksize(pdesc->tfm);
+ unsigned long alignmask = crypto_shash_alignmask(pdesc->tfm);
+ struct xcbc_desc_ctx *ctx = shash_desc_ctx(pdesc);
+ int bs = crypto_shash_blocksize(pdesc->tfm);
+ u8 *prev = PTR_ALIGN(&ctx->ctx[0], alignmask + 1) + bs;
ctx->len = 0;
- memset(ctx->odds, 0, bs);
- memset(ctx->prev, 0, bs);
+ memset(prev, 0, bs);
return 0;
}
-static int crypto_xcbc_digest_update2(struct hash_desc *pdesc,
- struct scatterlist *sg,
- unsigned int nbytes)
+static int crypto_xcbc_digest_update(struct shash_desc *pdesc, const u8 *p,
+ unsigned int len)
{
- struct crypto_hash *parent = pdesc->tfm;
- struct crypto_xcbc_ctx *ctx = crypto_hash_ctx_aligned(parent);
- struct crypto_cipher *tfm = ctx->child;
- int bs = crypto_hash_blocksize(parent);
-
- for (;;) {
- struct page *pg = sg_page(sg);
- unsigned int offset = sg->offset;
- unsigned int slen = sg->length;
-
- if (unlikely(slen > nbytes))
- slen = nbytes;
-
- nbytes -= slen;
-
- while (slen > 0) {
- unsigned int len = min(slen, ((unsigned int)(PAGE_SIZE)) - offset);
- char *p = crypto_kmap(pg, 0) + offset;
-
- /* checking the data can fill the block */
- if ((ctx->len + len) <= bs) {
- memcpy(ctx->odds + ctx->len, p, len);
- ctx->len += len;
- slen -= len;
-
- /* checking the rest of the page */
- if (len + offset >= PAGE_SIZE) {
- offset = 0;
- pg++;
- } else
- offset += len;
-
- crypto_kunmap(p, 0);
- crypto_yield(pdesc->flags);
- continue;
- }
-
- /* filling odds with new data and encrypting it */
- memcpy(ctx->odds + ctx->len, p, bs - ctx->len);
- len -= bs - ctx->len;
- p += bs - ctx->len;
-
- ctx->xor(ctx->prev, ctx->odds, bs);
- crypto_cipher_encrypt_one(tfm, ctx->prev, ctx->prev);
-
- /* clearing the length */
- ctx->len = 0;
-
- /* encrypting the rest of data */
- while (len > bs) {
- ctx->xor(ctx->prev, p, bs);
- crypto_cipher_encrypt_one(tfm, ctx->prev,
- ctx->prev);
- p += bs;
- len -= bs;
- }
-
- /* keeping the surplus of blocksize */
- if (len) {
- memcpy(ctx->odds, p, len);
- ctx->len = len;
- }
- crypto_kunmap(p, 0);
- crypto_yield(pdesc->flags);
- slen -= min(slen, ((unsigned int)(PAGE_SIZE)) - offset);
- offset = 0;
- pg++;
- }
-
- if (!nbytes)
- break;
- sg = scatterwalk_sg_next(sg);
+ struct crypto_shash *parent = pdesc->tfm;
+ unsigned long alignmask = crypto_shash_alignmask(parent);
+ struct xcbc_tfm_ctx *tctx = crypto_shash_ctx(parent);
+ struct xcbc_desc_ctx *ctx = shash_desc_ctx(pdesc);
+ struct crypto_cipher *tfm = tctx->child;
+ int bs = crypto_shash_blocksize(parent);
+ u8 *odds = PTR_ALIGN(&ctx->ctx[0], alignmask + 1);
+ u8 *prev = odds + bs;
+
+ /* checking the data can fill the block */
+ if ((ctx->len + len) <= bs) {
+ memcpy(odds + ctx->len, p, len);
+ ctx->len += len;
+ return 0;
}
- return 0;
-}
+ /* filling odds with new data and encrypting it */
+ memcpy(odds + ctx->len, p, bs - ctx->len);
+ len -= bs - ctx->len;
+ p += bs - ctx->len;
-static int crypto_xcbc_digest_update(struct hash_desc *pdesc,
- struct scatterlist *sg,
- unsigned int nbytes)
-{
- if (WARN_ON_ONCE(in_irq()))
- return -EDEADLK;
- return crypto_xcbc_digest_update2(pdesc, sg, nbytes);
-}
+ crypto_xor(prev, odds, bs);
+ crypto_cipher_encrypt_one(tfm, prev, prev);
-static int crypto_xcbc_digest_final(struct hash_desc *pdesc, u8 *out)
-{
- struct crypto_hash *parent = pdesc->tfm;
- struct crypto_xcbc_ctx *ctx = crypto_hash_ctx_aligned(parent);
- struct crypto_cipher *tfm = ctx->child;
- int bs = crypto_hash_blocksize(parent);
- int err = 0;
-
- if (ctx->len == bs) {
- u8 key2[bs];
+ /* clearing the length */
+ ctx->len = 0;
- if ((err = crypto_cipher_setkey(tfm, ctx->key, ctx->keylen)) != 0)
- return err;
+ /* encrypting the rest of data */
+ while (len > bs) {
+ crypto_xor(prev, p, bs);
+ crypto_cipher_encrypt_one(tfm, prev, prev);
+ p += bs;
+ len -= bs;
+ }
- crypto_cipher_encrypt_one(tfm, key2,
- (u8 *)(ctx->consts + bs));
+ /* keeping the surplus of blocksize */
+ if (len) {
+ memcpy(odds, p, len);
+ ctx->len = len;
+ }
- ctx->xor(ctx->prev, ctx->odds, bs);
- ctx->xor(ctx->prev, key2, bs);
- _crypto_xcbc_digest_setkey(parent, ctx);
+ return 0;
+}
- crypto_cipher_encrypt_one(tfm, out, ctx->prev);
- } else {
- u8 key3[bs];
+static int crypto_xcbc_digest_final(struct shash_desc *pdesc, u8 *out)
+{
+ struct crypto_shash *parent = pdesc->tfm;
+ unsigned long alignmask = crypto_shash_alignmask(parent);
+ struct xcbc_tfm_ctx *tctx = crypto_shash_ctx(parent);
+ struct xcbc_desc_ctx *ctx = shash_desc_ctx(pdesc);
+ struct crypto_cipher *tfm = tctx->child;
+ int bs = crypto_shash_blocksize(parent);
+ u8 *consts = PTR_ALIGN(&tctx->ctx[0], alignmask + 1);
+ u8 *odds = PTR_ALIGN(&ctx->ctx[0], alignmask + 1);
+ u8 *prev = odds + bs;
+ unsigned int offset = 0;
+
+ if (ctx->len != bs) {
unsigned int rlen;
- u8 *p = ctx->odds + ctx->len;
+ u8 *p = odds + ctx->len;
+
*p = 0x80;
p++;
if (rlen)
memset(p, 0, rlen);
- if ((err = crypto_cipher_setkey(tfm, ctx->key, ctx->keylen)) != 0)
- return err;
-
- crypto_cipher_encrypt_one(tfm, key3,
- (u8 *)(ctx->consts + bs * 2));
-
- ctx->xor(ctx->prev, ctx->odds, bs);
- ctx->xor(ctx->prev, key3, bs);
-
- _crypto_xcbc_digest_setkey(parent, ctx);
-
- crypto_cipher_encrypt_one(tfm, out, ctx->prev);
+ offset += bs;
}
- return 0;
-}
+ crypto_xor(prev, odds, bs);
+ crypto_xor(prev, consts + offset, bs);
-static int crypto_xcbc_digest(struct hash_desc *pdesc,
- struct scatterlist *sg, unsigned int nbytes, u8 *out)
-{
- if (WARN_ON_ONCE(in_irq()))
- return -EDEADLK;
+ crypto_cipher_encrypt_one(tfm, out, prev);
- crypto_xcbc_digest_init(pdesc);
- crypto_xcbc_digest_update2(pdesc, sg, nbytes);
- return crypto_xcbc_digest_final(pdesc, out);
+ return 0;
}
static int xcbc_init_tfm(struct crypto_tfm *tfm)
struct crypto_cipher *cipher;
struct crypto_instance *inst = (void *)tfm->__crt_alg;
struct crypto_spawn *spawn = crypto_instance_ctx(inst);
- struct crypto_xcbc_ctx *ctx = crypto_hash_ctx_aligned(__crypto_hash_cast(tfm));
- int bs = crypto_hash_blocksize(__crypto_hash_cast(tfm));
+ struct xcbc_tfm_ctx *ctx = crypto_tfm_ctx(tfm);
cipher = crypto_spawn_cipher(spawn);
if (IS_ERR(cipher))
return PTR_ERR(cipher);
- switch(bs) {
- case 16:
- ctx->xor = xor_128;
- break;
- default:
- return -EINVAL;
- }
-
ctx->child = cipher;
- ctx->odds = (u8*)(ctx+1);
- ctx->prev = ctx->odds + bs;
- ctx->key = ctx->prev + bs;
return 0;
};
static void xcbc_exit_tfm(struct crypto_tfm *tfm)
{
- struct crypto_xcbc_ctx *ctx = crypto_hash_ctx_aligned(__crypto_hash_cast(tfm));
+ struct xcbc_tfm_ctx *ctx = crypto_tfm_ctx(tfm);
crypto_free_cipher(ctx->child);
}
-static struct crypto_instance *xcbc_alloc(struct rtattr **tb)
+static int xcbc_create(struct crypto_template *tmpl, struct rtattr **tb)
{
- struct crypto_instance *inst;
+ struct shash_instance *inst;
struct crypto_alg *alg;
+ unsigned long alignmask;
int err;
- err = crypto_check_attr_type(tb, CRYPTO_ALG_TYPE_HASH);
+ err = crypto_check_attr_type(tb, CRYPTO_ALG_TYPE_SHASH);
if (err)
- return ERR_PTR(err);
+ return err;
alg = crypto_get_attr_alg(tb, CRYPTO_ALG_TYPE_CIPHER,
CRYPTO_ALG_TYPE_MASK);
if (IS_ERR(alg))
- return ERR_CAST(alg);
+ return PTR_ERR(alg);
switch(alg->cra_blocksize) {
case 16:
break;
default:
- inst = ERR_PTR(-EINVAL);
goto out_put_alg;
}
- inst = crypto_alloc_instance("xcbc", alg);
+ inst = shash_alloc_instance("xcbc", alg);
+ err = PTR_ERR(inst);
if (IS_ERR(inst))
goto out_put_alg;
- inst->alg.cra_flags = CRYPTO_ALG_TYPE_HASH;
- inst->alg.cra_priority = alg->cra_priority;
- inst->alg.cra_blocksize = alg->cra_blocksize;
- inst->alg.cra_alignmask = alg->cra_alignmask;
- inst->alg.cra_type = &crypto_hash_type;
-
- inst->alg.cra_hash.digestsize = alg->cra_blocksize;
- inst->alg.cra_ctxsize = sizeof(struct crypto_xcbc_ctx) +
- ALIGN(inst->alg.cra_blocksize * 3, sizeof(void *));
- inst->alg.cra_init = xcbc_init_tfm;
- inst->alg.cra_exit = xcbc_exit_tfm;
-
- inst->alg.cra_hash.init = crypto_xcbc_digest_init;
- inst->alg.cra_hash.update = crypto_xcbc_digest_update;
- inst->alg.cra_hash.final = crypto_xcbc_digest_final;
- inst->alg.cra_hash.digest = crypto_xcbc_digest;
- inst->alg.cra_hash.setkey = crypto_xcbc_digest_setkey;
+ err = crypto_init_spawn(shash_instance_ctx(inst), alg,
+ shash_crypto_instance(inst),
+ CRYPTO_ALG_TYPE_MASK);
+ if (err)
+ goto out_free_inst;
+
+ alignmask = alg->cra_alignmask | 3;
+ inst->alg.base.cra_alignmask = alignmask;
+ inst->alg.base.cra_priority = alg->cra_priority;
+ inst->alg.base.cra_blocksize = alg->cra_blocksize;
+
+ inst->alg.digestsize = alg->cra_blocksize;
+ inst->alg.descsize = ALIGN(sizeof(struct xcbc_desc_ctx),
+ crypto_tfm_ctx_alignment()) +
+ (alignmask &
+ ~(crypto_tfm_ctx_alignment() - 1)) +
+ alg->cra_blocksize * 2;
+
+ inst->alg.base.cra_ctxsize = ALIGN(sizeof(struct xcbc_tfm_ctx),
+ alignmask + 1) +
+ alg->cra_blocksize * 2;
+ inst->alg.base.cra_init = xcbc_init_tfm;
+ inst->alg.base.cra_exit = xcbc_exit_tfm;
+
+ inst->alg.init = crypto_xcbc_digest_init;
+ inst->alg.update = crypto_xcbc_digest_update;
+ inst->alg.final = crypto_xcbc_digest_final;
+ inst->alg.setkey = crypto_xcbc_digest_setkey;
+
+ err = shash_register_instance(tmpl, inst);
+ if (err) {
+out_free_inst:
+ shash_free_instance(shash_crypto_instance(inst));
+ }
out_put_alg:
crypto_mod_put(alg);
- return inst;
-}
-
-static void xcbc_free(struct crypto_instance *inst)
-{
- crypto_drop_spawn(crypto_instance_ctx(inst));
- kfree(inst);
+ return err;
}
static struct crypto_template crypto_xcbc_tmpl = {
.name = "xcbc",
- .alloc = xcbc_alloc,
- .free = xcbc_free,
+ .create = xcbc_create,
+ .free = shash_free_instance,
.module = THIS_MODULE,
};
#define _COMPONENT ACPI_MEMORY_DEVICE_COMPONENT
+#undef PREFIX
+#define PREFIX "ACPI:memory_hp:"
+
ACPI_MODULE_NAME("acpi_memhotplug");
MODULE_AUTHOR("Naveen B S <naveen.b.s@intel.com>");
MODULE_DESCRIPTION("Hotplug Mem Driver");
acpi_handle phandle;
struct acpi_device *device = NULL;
struct acpi_device *pdevice = NULL;
+ int result;
if (!acpi_bus_get_device(handle, &device) && device)
}
/* Get the parent device */
- status = acpi_bus_get_device(phandle, &pdevice);
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status, "Cannot get acpi bus device"));
+ result = acpi_bus_get_device(phandle, &pdevice);
+ if (result) {
+ printk(KERN_WARNING PREFIX "Cannot get acpi bus device");
return -EINVAL;
}
* Now add the notified device. This creates the acpi_device
* and invokes .add function
*/
- status = acpi_bus_add(&device, pdevice, handle, ACPI_BUS_TYPE_DEVICE);
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status, "Cannot add acpi bus"));
+ result = acpi_bus_add(&device, pdevice, handle, ACPI_BUS_TYPE_DEVICE);
+ if (result) {
+ printk(KERN_WARNING PREFIX "Cannot add acpi bus");
return -EINVAL;
}
num_enabled++;
continue;
}
-
+ /*
+ * If the memory block size is zero, please ignore it.
+ * Don't try to do the following memory hotplug flowchart.
+ */
+ if (!info->length)
+ continue;
if (node < 0)
node = memory_add_physaddr_to_nid(info->start_addr);
mem_device->state = MEMORY_INVALID_STATE;
return -EINVAL;
}
-
- return result;
+ /*
+ * Sometimes the memory device will contain several memory blocks.
+ * When one memory block is hot-added to the system memory, it will
+ * be regarded as a success.
+ * Otherwise if the last memory block can't be hot-added to the system
+ * memory, it will be failure and the memory device can't be bound with
+ * driver.
+ */
+ return 0;
}
static int acpi_memory_powerdown_device(struct acpi_memory_device *mem_device)
#define AOPOBJ_OBJECT_INITIALIZED 0x08
#define AOPOBJ_SETUP_COMPLETE 0x10
#define AOPOBJ_SINGLE_DATUM 0x20
+#define AOPOBJ_INVALID 0x40 /* Used if host OS won't allow an op_region address */
/******************************************************************************
*
status = acpi_ds_execute_arguments(node, acpi_ns_get_parent_node(node),
extra_desc->extra.aml_length,
extra_desc->extra.aml_start);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /* Validate the region address/length via the host OS */
+
+ status = acpi_os_validate_address(obj_desc->region.space_id,
+ obj_desc->region.address,
+ (acpi_size) obj_desc->region.length,
+ acpi_ut_get_node_name(node));
+
+ if (ACPI_FAILURE(status)) {
+ /*
+ * Invalid address/length. We will emit an error message and mark
+ * the region as invalid, so that it will cause an additional error if
+ * it is ever used. Then return AE_OK.
+ */
+ ACPI_EXCEPTION((AE_INFO, status,
+ "During address validation of OpRegion [%4.4s]",
+ node->name.ascii));
+ obj_desc->common.flags |= AOPOBJ_INVALID;
+ status = AE_OK;
+ }
+
return_ACPI_STATUS(status);
}
}
}
+ /* Exit if Address/Length have been disallowed by the host OS */
+
+ if (rgn_desc->common.flags & AOPOBJ_INVALID) {
+ return_ACPI_STATUS(AE_AML_ILLEGAL_ADDRESS);
+ }
+
/*
* Exit now for SMBus address space, it has a non-linear address space
* and the request cannot be directly validated
ACPI_FUNCTION_TRACE_PTR(ex_store_buffer_to_buffer, source_desc);
+ /* If Source and Target are the same, just return */
+
+ if (source_desc == target_desc) {
+ return_ACPI_STATUS(AE_OK);
+ }
+
/* We know that source_desc is a buffer by now */
buffer = ACPI_CAST_PTR(u8, source_desc->buffer.pointer);
ACPI_FUNCTION_TRACE_PTR(ex_store_string_to_string, source_desc);
+ /* If Source and Target are the same, just return */
+
+ if (source_desc == target_desc) {
+ return_ACPI_STATUS(AE_OK);
+ }
+
/* We know that source_desc is a string by now */
buffer = ACPI_CAST_PTR(u8, source_desc->string.pointer);
return AE_OK;
}
+static void bind_to_cpu0(struct work_struct *work)
+{
+ set_cpus_allowed(current, cpumask_of_cpu(0));
+ kfree(work);
+}
+
+static void bind_workqueue(struct workqueue_struct *wq)
+{
+ struct work_struct *work;
+
+ work = kzalloc(sizeof(struct work_struct), GFP_KERNEL);
+ INIT_WORK(work, bind_to_cpu0);
+ queue_work(wq, work);
+}
+
acpi_status acpi_os_initialize1(void)
{
+ /*
+ * On some machines, a software-initiated SMI causes corruption unless
+ * the SMI runs on CPU 0. An SMI can be initiated by any AML, but
+ * typically it's done in GPE-related methods that are run via
+ * workqueues, so we can avoid the known corruption cases by binding
+ * the workqueues to CPU 0.
+ */
kacpid_wq = create_singlethread_workqueue("kacpid");
+ bind_workqueue(kacpid_wq);
kacpi_notify_wq = create_singlethread_workqueue("kacpi_notify");
+ bind_workqueue(kacpi_notify_wq);
kacpi_hotplug_wq = create_singlethread_workqueue("kacpi_hotplug");
+ bind_workqueue(kacpi_hotplug_wq);
BUG_ON(!kacpid_wq);
BUG_ON(!kacpi_notify_wq);
BUG_ON(!kacpi_hotplug_wq);
{
int result = 0;
+ if (acpi_disabled)
+ return 0;
+
memset(&errata, 0, sizeof(errata));
#ifdef CONFIG_SMP
static void __exit acpi_processor_exit(void)
{
+ if (acpi_disabled)
+ return;
+
acpi_processor_ppc_exit();
acpi_thermal_cpufreq_exit();
pr->power.timer_broadcast_on_state = state;
}
-static void lapic_timer_propagate_broadcast(struct acpi_processor *pr)
+static void lapic_timer_propagate_broadcast(void *arg)
{
+ struct acpi_processor *pr = (struct acpi_processor *) arg;
unsigned long reason;
reason = pr->power.timer_broadcast_on_state < INT_MAX ?
working++;
}
- lapic_timer_propagate_broadcast(pr);
+ smp_call_function_single(pr->id, lapic_timer_propagate_broadcast,
+ pr, 1);
return (working);
}
if (pr->limit.thermal.tx > tx)
tx = pr->limit.thermal.tx;
- result = acpi_processor_set_throttling(pr, tx);
+ result = acpi_processor_set_throttling(pr, tx, false);
if (result)
goto end;
}
if (state <= max_pstate) {
if (pr->flags.throttling && pr->throttling.state)
- result = acpi_processor_set_throttling(pr, 0);
+ result = acpi_processor_set_throttling(pr, 0, false);
cpufreq_set_cur_state(pr->id, state);
} else {
cpufreq_set_cur_state(pr->id, max_pstate);
result = acpi_processor_set_throttling(pr,
- state - max_pstate);
+ state - max_pstate, false);
}
return result;
}
#define THROTTLING_POSTCHANGE (2)
static int acpi_processor_get_throttling(struct acpi_processor *pr);
-int acpi_processor_set_throttling(struct acpi_processor *pr, int state);
+int acpi_processor_set_throttling(struct acpi_processor *pr,
+ int state, bool force);
static int acpi_processor_update_tsd_coord(void)
{
*/
target_state = throttling_limit;
}
- return acpi_processor_set_throttling(pr, target_state);
+ return acpi_processor_set_throttling(pr, target_state, false);
}
/*
if (ret >= 0) {
state = acpi_get_throttling_state(pr, value);
if (state == -1) {
- ACPI_WARNING((AE_INFO,
- "Invalid throttling state, reset"));
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Invalid throttling state, reset\n"));
state = 0;
- ret = acpi_processor_set_throttling(pr, state);
+ ret = acpi_processor_set_throttling(pr, state, true);
if (ret)
return ret;
}
}
static int acpi_processor_set_throttling_fadt(struct acpi_processor *pr,
- int state)
+ int state, bool force)
{
u32 value = 0;
u32 duty_mask = 0;
if (!pr->flags.throttling)
return -ENODEV;
- if (state == pr->throttling.state)
+ if (!force && (state == pr->throttling.state))
return 0;
if (state < pr->throttling_platform_limit)
}
static int acpi_processor_set_throttling_ptc(struct acpi_processor *pr,
- int state)
+ int state, bool force)
{
int ret;
acpi_integer value;
if (!pr->flags.throttling)
return -ENODEV;
- if (state == pr->throttling.state)
+ if (!force && (state == pr->throttling.state))
return 0;
if (state < pr->throttling_platform_limit)
return 0;
}
-int acpi_processor_set_throttling(struct acpi_processor *pr, int state)
+int acpi_processor_set_throttling(struct acpi_processor *pr,
+ int state, bool force)
{
cpumask_var_t saved_mask;
int ret = 0;
/* FIXME: use work_on_cpu() */
set_cpus_allowed_ptr(current, cpumask_of(pr->id));
ret = p_throttling->acpi_processor_set_throttling(pr,
- t_state.target_state);
+ t_state.target_state, force);
} else {
/*
* When the T-state coordination is SW_ALL or HW_ALL,
set_cpus_allowed_ptr(current, cpumask_of(i));
ret = match_pr->throttling.
acpi_processor_set_throttling(
- match_pr, t_state.target_state);
+ match_pr, t_state.target_state, force);
}
}
/*
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Disabling throttling (was T%d)\n",
pr->throttling.state));
- result = acpi_processor_set_throttling(pr, 0);
+ result = acpi_processor_set_throttling(pr, 0, false);
if (result)
goto end;
}
if (strcmp(tmpbuf, charp) != 0)
return -EINVAL;
- result = acpi_processor_set_throttling(pr, state_val);
+ result = acpi_processor_set_throttling(pr, state_val, false);
if (result)
return result;
},
},
{
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Hewlett-Packard HP G7000 Notebook PC",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP G7000 Notebook PC"),
+ },
+ },
+ {
.callback = init_old_suspend_ordering,
.ident = "Panasonic CF51-2L",
.matches = {
table_attr->attr.size = 0;
table_attr->attr.read = acpi_table_show;
table_attr->attr.attr.name = table_attr->name;
- table_attr->attr.attr.mode = 0444;
+ table_attr->attr.attr.mode = 0400;
return;
}
status = acpi_remove_notify_handler(device->dev->handle,
ACPI_DEVICE_NOTIFY,
acpi_video_device_notify);
- sysfs_remove_link(&device->backlight->dev.kobj, "device");
- backlight_device_unregister(device->backlight);
+ if (device->backlight) {
+ sysfs_remove_link(&device->backlight->dev.kobj, "device");
+ backlight_device_unregister(device->backlight);
+ device->backlight = NULL;
+ }
if (device->cdev) {
sysfs_remove_link(&device->dev->dev.kobj,
"thermal_cooling");
AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */
AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */
AHCI_HFLAG_NO_SUSPEND = (1 << 10), /* don't suspend */
+ AHCI_HFLAG_SRST_TOUT_IS_OFFLINE = (1 << 11), /* treat SRST timeout as
+ link offline */
/* ap->flags bits */
{ PCI_VDEVICE(INTEL, 0x502a), board_ahci }, /* Tolapai */
{ PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */
{ PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */
+ { PCI_VDEVICE(INTEL, 0x3a22), board_ahci }, /* ICH10 */
{ PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */
+ { PCI_VDEVICE(INTEL, 0x3b22), board_ahci }, /* PCH AHCI */
+ { PCI_VDEVICE(INTEL, 0x3b23), board_ahci }, /* PCH AHCI */
{ PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */
{ PCI_VDEVICE(INTEL, 0x3b25), board_ahci }, /* PCH RAID */
+ { PCI_VDEVICE(INTEL, 0x3b29), board_ahci }, /* PCH AHCI */
{ PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */
{ PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */
+ { PCI_VDEVICE(INTEL, 0x3b2f), board_ahci }, /* PCH AHCI */
/* JMicron 360/1/3/5/6, match class to avoid IDE function */
{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
int (*check_ready)(struct ata_link *link))
{
struct ata_port *ap = link->ap;
+ struct ahci_host_priv *hpriv = ap->host->private_data;
const char *reason = NULL;
unsigned long now, msecs;
struct ata_taskfile tf;
/* wait for link to become ready */
rc = ata_wait_after_reset(link, deadline, check_ready);
- /* link occupied, -ENODEV too is an error */
- if (rc) {
+ if (rc == -EBUSY && hpriv->flags & AHCI_HFLAG_SRST_TOUT_IS_OFFLINE) {
+ /*
+ * Workaround for cases where link online status can't
+ * be trusted. Treat device readiness timeout as link
+ * offline.
+ */
+ ata_link_printk(link, KERN_INFO,
+ "device not ready, treating as offline\n");
+ *class = ATA_DEV_NONE;
+ } else if (rc) {
+ /* link occupied, -ENODEV too is an error */
reason = "device not ready";
goto fail;
- }
- *class = ahci_dev_classify(ap);
+ } else
+ *class = ahci_dev_classify(ap);
DPRINTK("EXIT, class=%u\n", *class);
return 0;
irq_sts = readl(port_mmio + PORT_IRQ_STAT);
if (irq_sts & PORT_IRQ_BAD_PMP) {
ata_link_printk(link, KERN_WARNING,
- "failed due to HW bug, retry pmp=0\n");
+ "applying SB600 PMP SRST workaround "
+ "and retrying\n");
rc = ahci_do_softreset(link, class, 0, deadline,
ahci_check_ready);
}
return !ver || strcmp(ver, dmi->driver_data) < 0;
}
+static bool ahci_broken_online(struct pci_dev *pdev)
+{
+#define ENCODE_BUSDEVFN(bus, slot, func) \
+ (void *)(unsigned long)(((bus) << 8) | PCI_DEVFN((slot), (func)))
+ static const struct dmi_system_id sysids[] = {
+ /*
+ * There are several gigabyte boards which use
+ * SIMG5723s configured as hardware RAID. Certain
+ * 5723 firmware revisions shipped there keep the link
+ * online but fail to answer properly to SRST or
+ * IDENTIFY when no device is attached downstream
+ * causing libata to retry quite a few times leading
+ * to excessive detection delay.
+ *
+ * As these firmwares respond to the second reset try
+ * with invalid device signature, considering unknown
+ * sig as offline works around the problem acceptably.
+ */
+ {
+ .ident = "EP45-DQ6",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR,
+ "Gigabyte Technology Co., Ltd."),
+ DMI_MATCH(DMI_BOARD_NAME, "EP45-DQ6"),
+ },
+ .driver_data = ENCODE_BUSDEVFN(0x0a, 0x00, 0),
+ },
+ {
+ .ident = "EP45-DS5",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR,
+ "Gigabyte Technology Co., Ltd."),
+ DMI_MATCH(DMI_BOARD_NAME, "EP45-DS5"),
+ },
+ .driver_data = ENCODE_BUSDEVFN(0x03, 0x00, 0),
+ },
+ { } /* terminate list */
+ };
+#undef ENCODE_BUSDEVFN
+ const struct dmi_system_id *dmi = dmi_first_match(sysids);
+ unsigned int val;
+
+ if (!dmi)
+ return false;
+
+ val = (unsigned long)dmi->driver_data;
+
+ return pdev->bus->number == (val >> 8) && pdev->devfn == (val & 0xff);
+}
+
static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
"BIOS update required for suspend/resume\n");
}
+ if (ahci_broken_online(pdev)) {
+ hpriv->flags |= AHCI_HFLAG_SRST_TOUT_IS_OFFLINE;
+ dev_info(&pdev->dev,
+ "online status unreliable, applying workaround\n");
+ }
+
/* CAP.NP sometimes indicate the index of the last enabled
* port, at other times, that of the last possible port, so
* determining the maximum port number requires looking at
{ 0x27DF, 0x0005, 0x0280 }, /* ICH7 on Acer 5602WLMi */
{ 0x27DF, 0x1025, 0x0102 }, /* ICH7 on Acer 5602aWLMi */
{ 0x27DF, 0x1025, 0x0110 }, /* ICH7 on Acer 3682WLMi */
+ { 0x27DF, 0x1028, 0x02b0 }, /* ICH7 on unknown Dell */
{ 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */
{ 0x27DF, 0x103C, 0x30A1 }, /* ICH7 on HP Compaq nc2400 */
+ { 0x27DF, 0x103C, 0x361a }, /* ICH7 on unkown HP */
{ 0x27DF, 0x1071, 0xD221 }, /* ICH7 on Hercules EC-900 */
+ { 0x27DF, 0x152D, 0x0778 }, /* ICH7 on unknown Intel */
{ 0x24CA, 0x1025, 0x0061 }, /* ICH4 on ACER Aspire 2023WLMi */
{ 0x24CA, 0x1025, 0x003d }, /* ICH4 on ACER TM290 */
{ 0x266F, 0x1025, 0x0066 }, /* ICH6 on ACER Aspire 1694WLMi */
return ata_sff_prereset(link, deadline);
}
+static DEFINE_SPINLOCK(piix_lock);
+
/**
* piix_set_piomode - Initialize host controller PATA PIO timings
* @ap: Port whose timings we are configuring
static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
- unsigned int pio = adev->pio_mode - XFER_PIO_0;
struct pci_dev *dev = to_pci_dev(ap->host->dev);
+ unsigned long flags;
+ unsigned int pio = adev->pio_mode - XFER_PIO_0;
unsigned int is_slave = (adev->devno != 0);
unsigned int master_port= ap->port_no ? 0x42 : 0x40;
unsigned int slave_port = 0x44;
if (adev->class == ATA_DEV_ATA)
control |= 4; /* PPE enable */
+ spin_lock_irqsave(&piix_lock, flags);
+
/* PIO configuration clears DTE unconditionally. It will be
* programmed in set_dmamode which is guaranteed to be called
* after set_piomode if any DMA mode is available.
udma_enable &= ~(1 << (2 * ap->port_no + adev->devno));
pci_write_config_byte(dev, 0x48, udma_enable);
}
+
+ spin_unlock_irqrestore(&piix_lock, flags);
}
/**
static void do_pata_set_dmamode(struct ata_port *ap, struct ata_device *adev, int isich)
{
struct pci_dev *dev = to_pci_dev(ap->host->dev);
+ unsigned long flags;
u8 master_port = ap->port_no ? 0x42 : 0x40;
u16 master_data;
u8 speed = adev->dma_mode;
{ 2, 1 },
{ 2, 3 }, };
+ spin_lock_irqsave(&piix_lock, flags);
+
pci_read_config_word(dev, master_port, &master_data);
if (ap->udma_mask)
pci_read_config_byte(dev, 0x48, &udma_enable);
/* Don't scribble on 0x48 if the controller does not support UDMA */
if (ap->udma_mask)
pci_write_config_byte(dev, 0x48, udma_enable);
+
+ spin_unlock_irqrestore(&piix_lock, flags);
}
/**
return rc;
}
+ dev->n_native_sectors = native_sectors;
/* nothing to do? */
if (native_sectors <= sectors || !ata_ignore_hpa) {
static int ata_dev_set_mode(struct ata_device *dev)
{
+ struct ata_port *ap = dev->link->ap;
struct ata_eh_context *ehc = &dev->link->eh_context;
+ const bool nosetxfer = dev->horkage & ATA_HORKAGE_NOSETXFER;
const char *dev_err_whine = "";
int ign_dev_err = 0;
- unsigned int err_mask;
+ unsigned int err_mask = 0;
int rc;
dev->flags &= ~ATA_DFLAG_PIO;
if (dev->xfer_shift == ATA_SHIFT_PIO)
dev->flags |= ATA_DFLAG_PIO;
- err_mask = ata_dev_set_xfermode(dev);
+ if (nosetxfer && ap->flags & ATA_FLAG_SATA && ata_id_is_sata(dev->id))
+ dev_err_whine = " (SET_XFERMODE skipped)";
+ else {
+ if (nosetxfer)
+ ata_dev_printk(dev, KERN_WARNING,
+ "NOSETXFER but PATA detected - can't "
+ "skip SETXFER, might malfunction\n");
+ err_mask = ata_dev_set_xfermode(dev);
+ }
if (err_mask & ~AC_ERR_DEV)
goto fail;
unsigned int readid_flags)
{
u64 n_sectors = dev->n_sectors;
+ u64 n_native_sectors = dev->n_native_sectors;
int rc;
if (!ata_dev_enabled(dev))
/* verify n_sectors hasn't changed */
if (dev->class == ATA_DEV_ATA && n_sectors &&
dev->n_sectors != n_sectors) {
- ata_dev_printk(dev, KERN_INFO, "n_sectors mismatch "
+ ata_dev_printk(dev, KERN_WARNING, "n_sectors mismatch "
"%llu != %llu\n",
(unsigned long long)n_sectors,
(unsigned long long)dev->n_sectors);
-
- /* restore original n_sectors */
- dev->n_sectors = n_sectors;
-
- rc = -ENODEV;
- goto fail;
+ /*
+ * Something could have caused HPA to be unlocked
+ * involuntarily. If n_native_sectors hasn't changed
+ * and the new size matches it, keep the device.
+ */
+ if (dev->n_native_sectors == n_native_sectors &&
+ dev->n_sectors > n_sectors &&
+ dev->n_sectors == n_native_sectors) {
+ ata_dev_printk(dev, KERN_WARNING,
+ "new n_sectors matches native, probably "
+ "late HPA unlock, continuing\n");
+ /* keep using the old n_sectors */
+ dev->n_sectors = n_sectors;
+ } else {
+ /* restore original n_[native]_sectors and fail */
+ dev->n_native_sectors = n_native_sectors;
+ dev->n_sectors = n_sectors;
+ rc = -ENODEV;
+ goto fail;
+ }
}
return 0;
{ "WDC WD2500JD-00HBB0", "WD-WMAL71490727", ATA_HORKAGE_BROKEN_HPA },
{ "MAXTOR 6L080L4", "A93.0500", ATA_HORKAGE_BROKEN_HPA },
+ /* this one allows HPA unlocking but fails IOs on the area */
+ { "OCZ-VERTEX", "1.30", ATA_HORKAGE_BROKEN_HPA },
+
/* Devices which report 1 sector over size HPA */
{ "ST340823A", NULL, ATA_HORKAGE_HPA_SIZE, },
{ "ST320413A", NULL, ATA_HORKAGE_HPA_SIZE, },
/* Devices which aren't very happy with higher link speeds */
{ "WD My Book", NULL, ATA_HORKAGE_1_5_GBPS, },
+ /*
+ * Devices which choke on SETXFER. Applies only if both the
+ * device and controller are SATA.
+ */
+ { "PIONEER DVD-RW DVRTD08", "1.00", ATA_HORKAGE_NOSETXFER },
+
/* End Marker */
{ }
};
struct ata_port *ap = link->ap;
struct ata_link *slave = ap->slave_link;
struct ata_eh_context *ehc = &link->eh_context;
- struct ata_eh_context *sehc = &slave->eh_context;
+ struct ata_eh_context *sehc = slave ? &slave->eh_context : NULL;
unsigned int *classes = ehc->classes;
unsigned int lflags = link->flags;
int verbose = !(ehc->i.flags & ATA_EHI_QUIET);
ata_eh_about_to_do(link, NULL, ATA_EH_RESET);
rc = ata_do_reset(link, reset, classes, deadline, true);
+ if (rc) {
+ failed_link = link;
+ goto fail;
+ }
}
} else {
if (verbose)
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
-#include <mach/at91sam9260_matrix.h>
#include <mach/at91sam9_smc.h>
-#include <mach/at91sam9260.h>
#include <mach/board.h>
#include <mach/gpio.h>
unsigned long mode;
unsigned int cs;
+ struct clk *mck;
+
void __iomem *ide_addr;
void __iomem *alt_addr;
};
-const struct ata_timing initial_timing =
+static const struct ata_timing initial_timing =
{XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0};
-static unsigned int calc_mck_cycles(unsigned int ns, unsigned int mck_hz)
+static unsigned long calc_mck_cycles(unsigned long ns, unsigned long mck_hz)
{
unsigned long mul;
- /*
- * cycles = x [nsec] * f [Hz] / 10^9 [ns in sec] =
- * x * (f / 1_000_000_000) =
- * x * ((f * 65536) / 1_000_000_000) / 65536 =
- * x * (((f / 10_000) * 65536) / 100_000) / 65536 =
- */
+ /*
+ * cycles = x [nsec] * f [Hz] / 10^9 [ns in sec] =
+ * x * (f / 1_000_000_000) =
+ * x * ((f * 65536) / 1_000_000_000) / 65536 =
+ * x * (((f / 10_000) * 65536) / 100_000) / 65536 =
+ */
- mul = (mck_hz / 10000) << 16;
- mul /= 100000;
+ mul = (mck_hz / 10000) << 16;
+ mul /= 100000;
- return (ns * mul + 65536) >> 16; /* rounding */
+ return (ns * mul + 65536) >> 16; /* rounding */
}
static void set_smc_mode(struct at91_ide_info *info)
{
- at91_sys_write(AT91_SMC_MODE(info->cs), info->mode);
- return;
+ at91_sys_write(AT91_SMC_MODE(info->cs), info->mode);
+ return;
}
static void set_smc_timing(struct device *dev,
struct at91_ide_info *info, const struct ata_timing *ata)
{
- int read_cycle, write_cycle, active, recover;
- int nrd_setup, nrd_pulse, nrd_recover;
- int nwe_setup, nwe_pulse;
+ unsigned long read_cycle, write_cycle, active, recover;
+ unsigned long nrd_setup, nrd_pulse, nrd_recover;
+ unsigned long nwe_setup, nwe_pulse;
- int ncs_write_setup, ncs_write_pulse;
- int ncs_read_setup, ncs_read_pulse;
+ unsigned long ncs_write_setup, ncs_write_pulse;
+ unsigned long ncs_read_setup, ncs_read_pulse;
- unsigned int mck_hz;
- struct clk *mck;
+ unsigned long mck_hz;
read_cycle = ata->cyc8b;
nrd_setup = ata->setup;
nrd_pulse = ata->act8b;
nrd_recover = ata->rec8b;
- mck = clk_get(NULL, "mck");
- BUG_ON(IS_ERR(mck));
- mck_hz = clk_get_rate(mck);
+ mck_hz = clk_get_rate(info->mck);
read_cycle = calc_mck_cycles(read_cycle, mck_hz);
nrd_setup = calc_mck_cycles(nrd_setup, mck_hz);
nrd_pulse = calc_mck_cycles(nrd_pulse, mck_hz);
nrd_recover = calc_mck_cycles(nrd_recover, mck_hz);
- clk_put(mck);
-
active = nrd_setup + nrd_pulse;
recover = read_cycle - active;
ncs_write_setup = ncs_read_setup;
ncs_write_pulse = ncs_read_pulse;
- dev_dbg(dev, "ATA timings: nrd_setup = %d nrd_pulse = %d nrd_cycle = %d\n",
+ dev_dbg(dev, "ATA timings: nrd_setup = %lu nrd_pulse = %lu nrd_cycle = %lu\n",
nrd_setup, nrd_pulse, read_cycle);
- dev_dbg(dev, "ATA timings: nwe_setup = %d nwe_pulse = %d nwe_cycle = %d\n",
+ dev_dbg(dev, "ATA timings: nwe_setup = %lu nwe_pulse = %lu nwe_cycle = %lu\n",
nwe_setup, nwe_pulse, write_cycle);
- dev_dbg(dev, "ATA timings: ncs_read_setup = %d ncs_read_pulse = %d\n",
+ dev_dbg(dev, "ATA timings: ncs_read_setup = %lu ncs_read_pulse = %lu\n",
ncs_read_setup, ncs_read_pulse);
- dev_dbg(dev, "ATA timings: ncs_write_setup = %d ncs_write_pulse = %d\n",
+ dev_dbg(dev, "ATA timings: ncs_write_setup = %lu ncs_write_pulse = %lu\n",
ncs_write_setup, ncs_write_pulse);
at91_sys_write(AT91_SMC_SETUP(info->cs),
struct resource *mem_res;
struct ata_host *host;
struct ata_port *ap;
+
int irq_flags = 0;
int irq = 0;
int ret;
ata_port_desc(ap, "no IRQ, using PIO polling");
}
- info = kzalloc(sizeof(*info), GFP_KERNEL);
+ info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
if (!info) {
dev_err(dev, "failed to allocate memory for private data\n");
return -ENOMEM;
}
+ info->mck = clk_get(NULL, "mck");
+
+ if (IS_ERR(info->mck)) {
+ dev_err(dev, "failed to get access to mck clock\n");
+ return -ENODEV;
+ }
+
info->cs = board->chipselect;
info->mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
AT91_SMC_EXNWMODE_READY | AT91_SMC_BAT_SELECT |
if (!info->ide_addr) {
dev_err(dev, "failed to map IO base\n");
ret = -ENOMEM;
- goto err_ide_ioremap;
+ goto err_put;
}
info->alt_addr = devm_ioremap(dev,
if (!info->alt_addr) {
dev_err(dev, "failed to map CTL base\n");
ret = -ENOMEM;
- goto err_alt_ioremap;
+ goto err_put;
}
ap->ioaddr.cmd_addr = info->ide_addr;
irq ? ata_sff_interrupt : NULL,
irq_flags, &pata_at91_sht);
-err_alt_ioremap:
- devm_iounmap(dev, info->ide_addr);
-
-err_ide_ioremap:
- kfree(info);
-
+err_put:
+ clk_put(info->mck);
return ret;
}
static int __devexit pata_at91_remove(struct platform_device *pdev)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
- struct at91_ide_info *info = host->private_data;
- struct device *dev = &pdev->dev;
+ struct at91_ide_info *info;
if (!host)
return 0;
+ info = host->private_data;
ata_host_detach(host);
if (!info)
return 0;
- devm_iounmap(dev, info->ide_addr);
- devm_iounmap(dev, info->alt_addr);
+ clk_put(info->mck);
- kfree(info);
return 0;
}
/*
* pata_atiixp.c - ATI PATA for new ATA layer
* (C) 2005 Red Hat Inc
+ * (C) 2009 Bartlomiej Zolnierkiewicz
*
* Based on
*
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
int dn = 2 * ap->port_no + adev->devno;
-
- /* Check this is correct - the order is odd in both drivers */
int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1);
- u16 pio_mode_data, pio_timing_data;
+ u32 pio_timing_data;
+ u16 pio_mode_data;
pci_read_config_word(pdev, ATIIXP_IDE_PIO_MODE, &pio_mode_data);
pio_mode_data &= ~(0x7 << (4 * dn));
pio_mode_data |= pio << (4 * dn);
pci_write_config_word(pdev, ATIIXP_IDE_PIO_MODE, pio_mode_data);
- pci_read_config_word(pdev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data);
+ pci_read_config_dword(pdev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data);
pio_timing_data &= ~(0xFF << timing_shift);
pio_timing_data |= (pio_timings[pio] << timing_shift);
- pci_write_config_word(pdev, ATIIXP_IDE_PIO_TIMING, pio_timing_data);
+ pci_write_config_dword(pdev, ATIIXP_IDE_PIO_TIMING, pio_timing_data);
}
/**
udma_mode_data |= dma << (4 * dn);
pci_write_config_word(pdev, ATIIXP_IDE_UDMA_MODE, udma_mode_data);
} else {
- u16 mwdma_timing_data;
- /* Check this is correct - the order is odd in both drivers */
int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1);
+ u32 mwdma_timing_data;
dma -= XFER_MW_DMA_0;
- pci_read_config_word(pdev, ATIIXP_IDE_MWDMA_TIMING, &mwdma_timing_data);
+ pci_read_config_dword(pdev, ATIIXP_IDE_MWDMA_TIMING,
+ &mwdma_timing_data);
mwdma_timing_data &= ~(0xFF << timing_shift);
mwdma_timing_data |= (mwdma_timings[dma] << timing_shift);
- pci_write_config_word(pdev, ATIIXP_IDE_MWDMA_TIMING, mwdma_timing_data);
+ pci_write_config_dword(pdev, ATIIXP_IDE_MWDMA_TIMING,
+ mwdma_timing_data);
}
/*
* We must now look at the PIO mode situation. We may need to
ap = host->ports[i];
ocd = ap->dev->platform_data;
- if (!ap || (ap->flags & ATA_FLAG_DISABLED))
+
+ if (ap->flags & ATA_FLAG_DISABLED)
continue;
ocd = ap->dev->platform_data;
PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9),
PCMCIA_DEVICE_PROD_ID12("ARGOSY", "CD-ROM", 0x78f308dc, 0x66536591),
PCMCIA_DEVICE_PROD_ID12("ARGOSY", "PnPIDE", 0x78f308dc, 0x0c694728),
+ PCMCIA_DEVICE_PROD_ID12("CNF ", "CD-ROM", 0x46d7db81, 0x66536591),
PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591),
PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4),
PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde),
char *when = "idle";
ata_ehi_clear_desc(ehi);
- if (!ap || (ap->flags & ATA_FLAG_DISABLED)) {
+ if (ap->flags & ATA_FLAG_DISABLED) {
when = "disabled";
} else if (edma_was_enabled) {
when = "EDMA enabled";
static int adma_enabled;
static int swncq_enabled = 1;
+static int msi_enabled;
static void nv_adma_register_mode(struct ata_port *ap)
{
} else if (type == SWNCQ)
nv_swncq_host_init(host);
+ if (msi_enabled) {
+ dev_printk(KERN_NOTICE, &pdev->dev, "Using MSI\n");
+ pci_enable_msi(pdev);
+ }
+
pci_set_master(pdev);
return ata_host_activate(host, pdev->irq, ipriv->irq_handler,
IRQF_SHARED, ipriv->sht);
MODULE_PARM_DESC(adma, "Enable use of ADMA (Default: false)");
module_param_named(swncq, swncq_enabled, bool, 0444);
MODULE_PARM_DESC(swncq, "Enable use of SWNCQ (Default: true)");
+module_param_named(msi, msi_enabled, bool, 0444);
+MODULE_PARM_DESC(msi, "Enable use of MSI (Default: false)");
struct ata_port *ap = host->ports[i];
u32 bmdma2 = readl(mmio_base + sil_port[ap->port_no].bmdma2);
- if (unlikely(!ap || ap->flags & ATA_FLAG_DISABLED))
+ if (unlikely(ap->flags & ATA_FLAG_DISABLED))
continue;
/* turn off SATA_IRQ if not supported */
goto err;
}
/* Pages will be freed by vfree() */
- fw_priv->pages = NULL;
fw_priv->page_array_size = 0;
fw_priv->nr_pages = 0;
complete(&fw_priv->completion);
drv->driver.remove = platform_drv_remove;
if (drv->shutdown)
drv->driver.shutdown = platform_drv_shutdown;
- if (drv->suspend || drv->resume)
- pr_warning("Platform driver '%s' needs updating - please use "
- "dev_pm_ops\n", drv->driver.name);
return driver_register(&drv->driver);
}
drv->add(sysdev);
}
mutex_unlock(&sysdev_drivers_lock);
+ kobject_uevent(&sysdev->kobj, KOBJ_ADD);
}
- kobject_uevent(&sysdev->kobj, KOBJ_ADD);
return error;
}
u16 fw_ver; /* version of blade's firmware */
struct work_struct work;/* disk create work struct */
struct gendisk *gd;
- struct request_queue blkq;
+ struct request_queue *blkq;
struct hd_geometry geo;
sector_t ssize;
struct timer_list timer;
goto err_disk;
}
- blk_queue_make_request(&d->blkq, aoeblk_make_request);
- if (bdi_init(&d->blkq.backing_dev_info))
+ d->blkq = blk_alloc_queue(GFP_KERNEL);
+ if (!d->blkq)
goto err_mempool;
+ blk_queue_make_request(d->blkq, aoeblk_make_request);
+ d->blkq->backing_dev_info.name = "aoe";
+ if (bdi_init(&d->blkq->backing_dev_info))
+ goto err_blkq;
spin_lock_irqsave(&d->lock, flags);
gd->major = AOE_MAJOR;
gd->first_minor = d->sysminor * AOE_PARTITIONS;
snprintf(gd->disk_name, sizeof gd->disk_name, "etherd/e%ld.%d",
d->aoemajor, d->aoeminor);
- gd->queue = &d->blkq;
+ gd->queue = d->blkq;
d->gd = gd;
d->flags &= ~DEVFL_GDALLOC;
d->flags |= DEVFL_UP;
aoedisk_add_sysfs(d);
return;
+err_blkq:
+ blk_cleanup_queue(d->blkq);
+ d->blkq = NULL;
err_mempool:
mempool_destroy(d->bufpool);
err_disk:
if (d->bufpool)
mempool_destroy(d->bufpool);
skbpoolfree(d);
+ blk_cleanup_queue(d->blkq);
kfree(d);
}
drive, dtp->blocks, dtp->spt, dtp->stretch);
/* sanity check */
- if (!dtp || setprm.track != dtp->blocks/dtp->spt/2 ||
+ if (setprm.track != dtp->blocks/dtp->spt/2 ||
setprm.head != 2) {
redo_fd_request();
return -EINVAL;
/* Register offsets */
#define MG_BUFF_OFFSET 0x8000
-#define MG_STORAGE_BUFFER_SIZE 0x200
#define MG_REG_OFFSET 0xC000
#define MG_REG_FEATURE (MG_REG_OFFSET + 2) /* write case */
#define MG_REG_ERROR (MG_REG_OFFSET + 2) /* read case */
host->error = MG_ERR_NONE;
expire = jiffies + msecs_to_jiffies(msec);
+ /* These 2 times dummy status read prevents reading invalid
+ * status. A very little time (3 times of mflash operating clk)
+ * is required for busy bit is set. Use dummy read instead of
+ * busy wait, because mflash's PLL is machine dependent.
+ */
+ if (prv_data->use_polling) {
+ status = inb((unsigned long)host->dev_base + MG_REG_STATUS);
+ status = inb((unsigned long)host->dev_base + MG_REG_STATUS);
+ }
+
status = inb((unsigned long)host->dev_base + MG_REG_STATUS);
do {
mg_dump_status("not ready", status, host);
return MG_ERR_INV_STAT;
}
- if (prv_data->use_polling)
- msleep(1);
status = inb((unsigned long)host->dev_base + MG_REG_STATUS);
} while (time_before(cur_jiffies, expire));
return MG_ERR_NONE;
}
+static void mg_read_one(struct mg_host *host, struct request *req)
+{
+ u16 *buff = (u16 *)req->buffer;
+ u32 i;
+
+ for (i = 0; i < MG_SECTOR_SIZE >> 1; i++)
+ *buff++ = inw((unsigned long)host->dev_base + MG_BUFF_OFFSET +
+ (i << 1));
+}
+
static void mg_read(struct request *req)
{
- u32 j;
struct mg_host *host = req->rq_disk->private_data;
if (mg_out(host, blk_rq_pos(req), blk_rq_sectors(req),
blk_rq_sectors(req), blk_rq_pos(req), req->buffer);
do {
- u16 *buff = (u16 *)req->buffer;
-
if (mg_wait(host, ATA_DRQ,
MG_TMAX_WAIT_RD_DRQ) != MG_ERR_NONE) {
mg_bad_rw_intr(host);
return;
}
- for (j = 0; j < MG_SECTOR_SIZE >> 1; j++)
- *buff++ = inw((unsigned long)host->dev_base +
- MG_BUFF_OFFSET + (j << 1));
+
+ mg_read_one(host, req);
outb(MG_CMD_RD_CONF, (unsigned long)host->dev_base +
MG_REG_COMMAND);
} while (mg_end_request(host, 0, MG_SECTOR_SIZE));
}
+static void mg_write_one(struct mg_host *host, struct request *req)
+{
+ u16 *buff = (u16 *)req->buffer;
+ u32 i;
+
+ for (i = 0; i < MG_SECTOR_SIZE >> 1; i++)
+ outw(*buff++, (unsigned long)host->dev_base + MG_BUFF_OFFSET +
+ (i << 1));
+}
+
static void mg_write(struct request *req)
{
- u32 j;
struct mg_host *host = req->rq_disk->private_data;
+ unsigned int rem = blk_rq_sectors(req);
- if (mg_out(host, blk_rq_pos(req), blk_rq_sectors(req),
+ if (mg_out(host, blk_rq_pos(req), rem,
MG_CMD_WR, NULL) != MG_ERR_NONE) {
mg_bad_rw_intr(host);
return;
}
MG_DBG("requested %d sects (from %ld), buffer=0x%p\n",
- blk_rq_sectors(req), blk_rq_pos(req), req->buffer);
+ rem, blk_rq_pos(req), req->buffer);
+
+ if (mg_wait(host, ATA_DRQ,
+ MG_TMAX_WAIT_WR_DRQ) != MG_ERR_NONE) {
+ mg_bad_rw_intr(host);
+ return;
+ }
do {
- u16 *buff = (u16 *)req->buffer;
+ mg_write_one(host, req);
- if (mg_wait(host, ATA_DRQ, MG_TMAX_WAIT_WR_DRQ) != MG_ERR_NONE) {
+ outb(MG_CMD_WR_CONF, (unsigned long)host->dev_base +
+ MG_REG_COMMAND);
+
+ rem--;
+ if (rem > 1 && mg_wait(host, ATA_DRQ,
+ MG_TMAX_WAIT_WR_DRQ) != MG_ERR_NONE) {
+ mg_bad_rw_intr(host);
+ return;
+ } else if (mg_wait(host, MG_STAT_READY,
+ MG_TMAX_WAIT_WR_DRQ) != MG_ERR_NONE) {
mg_bad_rw_intr(host);
return;
}
- for (j = 0; j < MG_SECTOR_SIZE >> 1; j++)
- outw(*buff++, (unsigned long)host->dev_base +
- MG_BUFF_OFFSET + (j << 1));
-
- outb(MG_CMD_WR_CONF, (unsigned long)host->dev_base +
- MG_REG_COMMAND);
} while (mg_end_request(host, 0, MG_SECTOR_SIZE));
}
{
struct request *req = host->req;
u32 i;
- u16 *buff;
/* check status */
do {
return;
ok_to_read:
- /* get current segment of request */
- buff = (u16 *)req->buffer;
-
- /* read 1 sector */
- for (i = 0; i < MG_SECTOR_SIZE >> 1; i++)
- *buff++ = inw((unsigned long)host->dev_base + MG_BUFF_OFFSET +
- (i << 1));
+ mg_read_one(host, req);
MG_DBG("sector %ld, remaining=%ld, buffer=0x%p\n",
blk_rq_pos(req), blk_rq_sectors(req) - 1, req->buffer);
static void mg_write_intr(struct mg_host *host)
{
struct request *req = host->req;
- u32 i, j;
- u16 *buff;
+ u32 i;
bool rem;
/* check status */
ok_to_write:
if ((rem = mg_end_request(host, 0, MG_SECTOR_SIZE))) {
/* write 1 sector and set handler if remains */
- buff = (u16 *)req->buffer;
- for (j = 0; j < MG_STORAGE_BUFFER_SIZE >> 1; j++) {
- outw(*buff, (unsigned long)host->dev_base +
- MG_BUFF_OFFSET + (j << 1));
- buff++;
- }
+ mg_write_one(host, req);
MG_DBG("sector %ld, remaining=%ld, buffer=0x%p\n",
blk_rq_pos(req), blk_rq_sectors(req), req->buffer);
host->mg_do_intr = mg_write_intr;
unsigned int sect_num,
unsigned int sect_cnt)
{
- u16 *buff;
- u32 i;
-
switch (rq_data_dir(req)) {
case READ:
if (mg_out(host, sect_num, sect_cnt, MG_CMD_RD, &mg_read_intr)
mg_bad_rw_intr(host);
return host->error;
}
- buff = (u16 *)req->buffer;
- for (i = 0; i < MG_SECTOR_SIZE >> 1; i++) {
- outw(*buff, (unsigned long)host->dev_base +
- MG_BUFF_OFFSET + (i << 1));
- buff++;
- }
+ mg_write_one(host, req);
mod_timer(&host->timer, jiffies + 3 * HZ);
outb(MG_CMD_WR_CONF, (unsigned long)host->dev_base +
MG_REG_COMMAND);
* Only allow the generic SCSI ioctls if the host can support it.
*/
if (!virtio_has_feature(vblk->vdev, VIRTIO_BLK_F_SCSI))
- return -ENOIOCTLCMD;
+ return -ENOTTY;
return scsi_cmd_ioctl(disk->queue, disk, mode, cmd, argp);
}
blk_queue_max_phys_segments(vblk->disk->queue, vblk->sg_elems-2);
blk_queue_max_hw_segments(vblk->disk->queue, vblk->sg_elems-2);
+ /* No need to bounce any requests */
+ blk_queue_bounce_limit(vblk->disk->queue, BLK_BOUNCE_ANY);
+
/* No real sector limit. */
blk_queue_max_sectors(vblk->disk->queue, -1U);
VIRTIO_BLK_F_SCSI, VIRTIO_BLK_F_IDENTIFY
};
-static struct virtio_driver virtio_blk = {
+/*
+ * virtio_blk causes spurious section mismatch warning by
+ * simultaneously referring to a __devinit and a __devexit function.
+ * Use __refdata to avoid this warning.
+ */
+static struct virtio_driver __refdata virtio_blk = {
.feature_table = features,
.feature_table_size = ARRAY_SIZE(features),
.driver.name = KBUILD_MODNAME,
static void __exit z2_exit(void)
{
int i, j;
- blk_unregister_region(MKDEV(Z2RAM_MAJOR, 0), 256);
+ blk_unregister_region(MKDEV(Z2RAM_MAJOR, 0), Z2MINOR_COUNT);
unregister_blkdev(Z2RAM_MAJOR, DEVICE_NAME);
del_gendisk(z2ram_gendisk);
put_disk(z2ram_gendisk);
#define PCI_DEVICE_ID_INTEL_IGDNG_D_HB 0x0040
#define PCI_DEVICE_ID_INTEL_IGDNG_D_IG 0x0042
#define PCI_DEVICE_ID_INTEL_IGDNG_M_HB 0x0044
+#define PCI_DEVICE_ID_INTEL_IGDNG_MA_HB 0x0062
#define PCI_DEVICE_ID_INTEL_IGDNG_M_IG 0x0046
/* cover 915 and 945 variants */
agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_GM45_HB || \
agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_G41_HB || \
agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_D_HB || \
- agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_M_HB)
+ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_M_HB || \
+ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_MA_HB)
extern int agp_memory_reserved;
case PCI_DEVICE_ID_INTEL_G41_HB:
case PCI_DEVICE_ID_INTEL_IGDNG_D_HB:
case PCI_DEVICE_ID_INTEL_IGDNG_M_HB:
+ case PCI_DEVICE_ID_INTEL_IGDNG_MA_HB:
*gtt_offset = *gtt_size = MB(2);
break;
default:
"IGDNG/D", NULL, &intel_i965_driver },
{ PCI_DEVICE_ID_INTEL_IGDNG_M_HB, PCI_DEVICE_ID_INTEL_IGDNG_M_IG, 0,
"IGDNG/M", NULL, &intel_i965_driver },
+ { PCI_DEVICE_ID_INTEL_IGDNG_MA_HB, PCI_DEVICE_ID_INTEL_IGDNG_M_IG, 0,
+ "IGDNG/MA", NULL, &intel_i965_driver },
{ 0, 0, 0, NULL, NULL, NULL }
};
ID(PCI_DEVICE_ID_INTEL_G41_HB),
ID(PCI_DEVICE_ID_INTEL_IGDNG_D_HB),
ID(PCI_DEVICE_ID_INTEL_IGDNG_M_HB),
+ ID(PCI_DEVICE_ID_INTEL_IGDNG_MA_HB),
{ }
};
.configure = parisc_agp_configure,
.fetch_size = parisc_agp_fetch_size,
.tlb_flush = parisc_agp_tlbflush,
- .mask_memory = parisc_agp_mask_memory,
+ .mask_memory = parisc_agp_page_mask_memory,
.masks = parisc_agp_masks,
.agp_enable = parisc_agp_enable,
.cache_flush = global_cache_flush,
struct hvc_struct *hp = tty->driver_data;
if (!hp)
- return -1;
+ return 0;
return hp->n_outbuf;
}
priv->dev->release = (void (*)(struct device *)) kfree;
rc = device_register(priv->dev);
if (rc) {
- kfree(priv->dev);
+ put_device(priv->dev);
goto out_error_dev;
}
* want to register another driver on the same PCI id.
*/
static const struct pci_device_id pci_tbl[] = {
- { 0x1022, 0x7443, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
- { 0x1022, 0x746b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
+ { PCI_VDEVICE(AMD, 0x7443), 0, },
+ { PCI_VDEVICE(AMD, 0x746b), 0, },
{ 0, }, /* terminate list */
};
MODULE_DEVICE_TABLE(pci, pci_tbl);
* want to register another driver on the same PCI id.
*/
static const struct pci_device_id pci_tbl[] = {
- { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LX_AES,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_LX_AES), 0, },
{ 0, }, /* terminate list */
};
MODULE_DEVICE_TABLE(pci, pci_tbl);
* - permits private mappings, "copies" are taken of the source of zeros
*/
static struct backing_dev_info zero_bdi = {
+ .name = "char/mem",
.capabilities = BDI_CAP_MAP_COPY,
};
if (space < 2)
return -1;
tty->canon_column = tty->column = 0;
- tty_put_char(tty, '\r');
- tty_put_char(tty, c);
+ tty->ops->write(tty, "\r\n", 2);
return 2;
}
tty->canon_column = tty->column;
static void n_tty_write_wakeup(struct tty_struct *tty)
{
- /* Write out any echoed characters that are still pending */
- process_echoes(tty);
-
if (tty->fasync && test_and_clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags))
kill_fasync(&tty->fasync, SIGIO, POLL_OUT);
}
static inline int input_available_p(struct tty_struct *tty, int amt)
{
+ tty_flush_to_ldisc(tty);
if (tty->icanon) {
if (tty->canon_data)
return 1;
struct port *port = &dc->port[index];
void __iomem *addr = port->dl_addr[port->toggle_dl];
struct tty_struct *tty = tty_port_tty_get(&port->port);
- int i;
+ int i, ret;
if (unlikely(!tty)) {
DBG1("tty not open for port: %d?", index);
/* disable interrupt in downlink... */
disable_transmit_dl(index, dc);
- return 0;
+ ret = 0;
+ goto put;
}
if (unlikely(size == 0)) {
dev_err(&dc->pdev->dev, "size == 0?\n");
- return 1;
+ ret = 1;
+ goto put;
}
tty_buffer_request_room(tty, size);
}
set_bit(index, &dc->flip);
+ ret = 1;
+put:
tty_kref_put(tty);
- return 1;
+ return ret;
}
/* Debug for interrupts */
{
struct port *port = tty->driver_data;
struct nozomi *dc = get_dc_by_tty(tty);
- s32 rval;
+ s32 rval = 0;
if (unlikely(!dc || !port)) {
- rval = -ENODEV;
goto exit_in_buffer;
}
if (unlikely(!port->port.count)) {
dev_err(&dc->pdev->dev, "No tty open?\n");
- rval = -ENODEV;
goto exit_in_buffer;
}
struct ipw_tty *tty = linux_tty->driver_data;
if (!tty)
- return -ENODEV;
+ return 0;
if (!tty->open_count)
- return -EINVAL;
+ return 0;
return tty->tx_bytes_queued;
}
* the other side of the pty/tty pair.
*/
-static int pty_write(struct tty_struct *tty, const unsigned char *buf,
- int count)
+static int pty_write(struct tty_struct *tty, const unsigned char *buf, int c)
{
struct tty_struct *to = tty->link;
- int c;
if (tty->stopped)
return 0;
- /* This isn't locked but our 8K is quite sloppy so no
- big deal */
-
- c = pty_space(to);
- if (c > count)
- c = count;
if (c > 0) {
/* Stuff the data into the input queue of the other end */
c = tty_insert_flip_string(to, buf, c);
static int pty_write_room(struct tty_struct *tty)
{
+ if (tty->stopped)
+ return 0;
return pty_space(tty->link);
}
#include <linux/spinlock.h>
#include <linux/percpu.h>
#include <linux/cryptohash.h>
+#include <linux/fips.h>
#ifdef CONFIG_GENERIC_HARDIRQS
# include <linux/irq.h>
unsigned add_ptr;
int entropy_count;
int input_rotate;
+ __u8 *last_data;
};
static __u32 input_pool_data[INPUT_POOL_WORDS];
{
ssize_t ret = 0, i;
__u8 tmp[EXTRACT_SIZE];
+ unsigned long flags;
xfer_secondary_pool(r, nbytes);
nbytes = account(r, nbytes, min, reserved);
while (nbytes) {
extract_buf(r, tmp);
+
+ if (r->last_data) {
+ spin_lock_irqsave(&r->lock, flags);
+ if (!memcmp(tmp, r->last_data, EXTRACT_SIZE))
+ panic("Hardware RNG duplicated output!\n");
+ memcpy(r->last_data, tmp, EXTRACT_SIZE);
+ spin_unlock_irqrestore(&r->lock, flags);
+ }
i = min_t(int, nbytes, EXTRACT_SIZE);
memcpy(buf, tmp, i);
nbytes -= i;
now = ktime_get_real();
mix_pool_bytes(r, &now, sizeof(now));
mix_pool_bytes(r, utsname(), sizeof(*(utsname())));
+ /* Enable continuous test in fips mode */
+ if (fips_enabled)
+ r->last_data = kmalloc(EXTRACT_SIZE, GFP_KERNEL);
}
static int rand_initialize(void)
if (clear & TIOCM_DTR)
port->MSVR &= ~MSVR_DTR;
}
- spin_lock_irqsave(&bp->lock, flags);
+ spin_lock(&bp->lock);
sx_out(bp, CD186x_CAR, port_No(port));
sx_out(bp, CD186x_MSVR, port->MSVR);
- spin_unlock_irqrestore(&bp->lock, flags);
+ spin_unlock(&bp->lock);
spin_unlock_irqrestore(&port->lock, flags);
func_exit();
return 0;
port->break_length = SPECIALIX_TPS / HZ * length;
port->COR2 |= COR2_ETC;
port->IER |= IER_TXRDY;
- spin_lock_irqsave(&bp->lock, flags);
+ spin_lock(&bp->lock);
sx_out(bp, CD186x_CAR, port_No(port));
sx_out(bp, CD186x_COR2, port->COR2);
sx_out(bp, CD186x_IER, port->IER);
- spin_unlock_irqrestore(&bp->lock, flags);
+ spin_unlock(&bp->lock);
spin_unlock_irqrestore(&port->lock, flags);
sx_wait_CCR(bp);
spin_lock_irqsave(&bp->lock, flags);
if (sx_crtscts(tty))
port->MSVR |= MSVR_DTR;
/* Else clause: see remark in "sx_throttle"... */
- spin_lock_irqsave(&bp->lock, flags);
+ spin_lock(&bp->lock);
sx_out(bp, CD186x_CAR, port_No(port));
- spin_unlock_irqrestore(&bp->lock, flags);
+ spin_unlock(&bp->lock);
if (I_IXOFF(tty)) {
spin_unlock_irqrestore(&port->lock, flags);
sx_wait_CCR(bp);
sx_wait_CCR(bp);
spin_lock_irqsave(&port->lock, flags);
}
- spin_lock_irqsave(&bp->lock, flags);
+ spin_lock(&bp->lock);
sx_out(bp, CD186x_MSVR, port->MSVR);
- spin_unlock_irqrestore(&bp->lock, flags);
+ spin_unlock(&bp->lock);
spin_unlock_irqrestore(&port->lock, flags);
func_exit();
spin_lock_irqsave(&port->lock, flags);
port->IER &= ~IER_TXRDY;
- spin_lock_irqsave(&bp->lock, flags);
+ spin_lock(&bp->lock);
sx_out(bp, CD186x_CAR, port_No(port));
sx_out(bp, CD186x_IER, port->IER);
- spin_unlock_irqrestore(&bp->lock, flags);
+ spin_unlock(&bp->lock);
spin_unlock_irqrestore(&port->lock, flags);
func_exit();
spin_lock_irqsave(&port->lock, flags);
if (port->xmit_cnt && port->xmit_buf && !(port->IER & IER_TXRDY)) {
port->IER |= IER_TXRDY;
- spin_lock_irqsave(&bp->lock, flags);
+ spin_lock(&bp->lock);
sx_out(bp, CD186x_CAR, port_No(port));
sx_out(bp, CD186x_IER, port->IER);
- spin_unlock_irqrestore(&bp->lock, flags);
+ spin_unlock(&bp->lock);
}
spin_unlock_irqrestore(&port->lock, flags);
#include <linux/sysrq.h>
#include <linux/kbd_kern.h>
#include <linux/proc_fs.h>
+#include <linux/nmi.h>
#include <linux/quotaops.h>
#include <linux/perf_counter.h>
#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <linux/vt_kern.h>
#include <linux/workqueue.h>
-#include <linux/kexec.h>
#include <linux/hrtimer.h>
#include <linux/oom.h>
static void sysrq_handle_crash(int key, struct tty_struct *tty)
{
char *killer = NULL;
+
+ panic_on_oops = 1; /* force panic */
+ wmb();
*killer = 1;
}
-static struct sysrq_key_op sysrq_crashdump_op = {
+static struct sysrq_key_op sysrq_crash_op = {
.handler = sysrq_handle_crash,
.help_msg = "Crash",
.action_msg = "Trigger a crash",
static void sysrq_handle_showallcpus(int key, struct tty_struct *tty)
{
- struct pt_regs *regs = get_irq_regs();
- if (regs) {
- printk(KERN_INFO "CPU%d:\n", smp_processor_id());
- show_regs(regs);
+ /*
+ * Fall back to the workqueue based printing if the
+ * backtrace printing did not succeed or the
+ * architecture has no support for it:
+ */
+ if (!trigger_all_cpu_backtrace()) {
+ struct pt_regs *regs = get_irq_regs();
+
+ if (regs) {
+ printk(KERN_INFO "CPU%d:\n", smp_processor_id());
+ show_regs(regs);
+ }
+ schedule_work(&sysrq_showallcpus);
}
- schedule_work(&sysrq_showallcpus);
}
static struct sysrq_key_op sysrq_showallcpus_op = {
*/
NULL, /* a */
&sysrq_reboot_op, /* b */
- &sysrq_crashdump_op, /* c & ibm_emac driver debug */
+ &sysrq_crash_op, /* c & ibm_emac driver debug */
&sysrq_showlocks_op, /* d */
&sysrq_term_op, /* e */
&sysrq_moom_op, /* f */
goto out_err;
}
+ /* Default timeouts */
+ chip->vendor.timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+ chip->vendor.timeout_b = msecs_to_jiffies(TIS_LONG_TIMEOUT);
+ chip->vendor.timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+ chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+
if (request_locality(chip, 0) != 0) {
rc = -ENODEV;
goto out_err;
vendor = ioread32(chip->vendor.iobase + TPM_DID_VID(0));
- /* Default timeouts */
- chip->vendor.timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
- chip->vendor.timeout_b = msecs_to_jiffies(TIS_LONG_TIMEOUT);
- chip->vendor.timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
- chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
-
dev_info(dev,
"1.2 TPM (device-id 0x%X, rev-id %d)\n",
vendor >> 16, ioread8(chip->vendor.iobase + TPM_RID(0)));
tty_ldisc_deref(disc);
}
+/**
+ * tty_flush_to_ldisc
+ * @tty: tty to push
+ *
+ * Push the terminal flip buffers to the line discipline.
+ *
+ * Must not be called from IRQ context.
+ */
+void tty_flush_to_ldisc(struct tty_struct *tty)
+{
+ flush_to_ldisc(&tty->buf.work.work);
+}
+
/**
* tty_flip_buffer_push - terminal
* @tty: tty to push
/* Line disc dispatch table */
static struct tty_ldisc_ops *tty_ldiscs[NR_LDISCS];
+static inline struct tty_ldisc *get_ldisc(struct tty_ldisc *ld)
+{
+ if (ld)
+ atomic_inc(&ld->users);
+ return ld;
+}
+
+static void put_ldisc(struct tty_ldisc *ld)
+{
+ unsigned long flags;
+
+ if (WARN_ON_ONCE(!ld))
+ return;
+
+ /*
+ * If this is the last user, free the ldisc, and
+ * release the ldisc ops.
+ *
+ * We really want an "atomic_dec_and_lock_irqsave()",
+ * but we don't have it, so this does it by hand.
+ */
+ local_irq_save(flags);
+ if (atomic_dec_and_lock(&ld->users, &tty_ldisc_lock)) {
+ struct tty_ldisc_ops *ldo = ld->ops;
+
+ ldo->refcount--;
+ module_put(ldo->owner);
+ spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+
+ kfree(ld);
+ return;
+ }
+ local_irq_restore(flags);
+}
+
/**
* tty_register_ldisc - install a line discipline
* @disc: ldisc number
/* lock it */
ldops->refcount++;
ld->ops = ldops;
- ld->refcount = 0;
+ atomic_set(&ld->users, 1);
err = 0;
}
}
return ld;
}
-/**
- * tty_ldisc_put - drop ldisc reference
- * @ld: ldisc
- *
- * Drop a reference to a line discipline. Manage refcounts and
- * module usage counts. Free the ldisc once the recount hits zero.
- *
- * Locking:
- * takes tty_ldisc_lock to guard against ldisc races
- */
-
-static void tty_ldisc_put(struct tty_ldisc *ld)
-{
- unsigned long flags;
- int disc = ld->ops->num;
- struct tty_ldisc_ops *ldo;
-
- BUG_ON(disc < N_TTY || disc >= NR_LDISCS);
-
- spin_lock_irqsave(&tty_ldisc_lock, flags);
- ldo = tty_ldiscs[disc];
- BUG_ON(ldo->refcount == 0);
- ldo->refcount--;
- module_put(ldo->owner);
- spin_unlock_irqrestore(&tty_ldisc_lock, flags);
- WARN_ON(ld->refcount);
- kfree(ld);
-}
-
static void *tty_ldiscs_seq_start(struct seq_file *m, loff_t *pos)
{
return (*pos < NR_LDISCS) ? pos : NULL;
if (IS_ERR(ld))
return 0;
seq_printf(m, "%-10s %2d\n", ld->ops->name ? ld->ops->name : "???", i);
- tty_ldisc_put(ld);
+ put_ldisc(ld);
return 0;
}
* Locking: takes tty_ldisc_lock
*/
-static int tty_ldisc_try(struct tty_struct *tty)
+static struct tty_ldisc *tty_ldisc_try(struct tty_struct *tty)
{
unsigned long flags;
struct tty_ldisc *ld;
- int ret = 0;
spin_lock_irqsave(&tty_ldisc_lock, flags);
- ld = tty->ldisc;
- if (test_bit(TTY_LDISC, &tty->flags)) {
- ld->refcount++;
- ret = 1;
- }
+ ld = NULL;
+ if (test_bit(TTY_LDISC, &tty->flags))
+ ld = get_ldisc(tty->ldisc);
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
- return ret;
+ return ld;
}
/**
struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *tty)
{
+ struct tty_ldisc *ld;
+
/* wait_event is a macro */
- wait_event(tty_ldisc_wait, tty_ldisc_try(tty));
- WARN_ON(tty->ldisc->refcount == 0);
- return tty->ldisc;
+ wait_event(tty_ldisc_wait, (ld = tty_ldisc_try(tty)) != NULL);
+ return ld;
}
EXPORT_SYMBOL_GPL(tty_ldisc_ref_wait);
struct tty_ldisc *tty_ldisc_ref(struct tty_struct *tty)
{
- if (tty_ldisc_try(tty))
- return tty->ldisc;
- return NULL;
+ return tty_ldisc_try(tty);
}
EXPORT_SYMBOL_GPL(tty_ldisc_ref);
void tty_ldisc_deref(struct tty_ldisc *ld)
{
- unsigned long flags;
-
- BUG_ON(ld == NULL);
-
- spin_lock_irqsave(&tty_ldisc_lock, flags);
- if (ld->refcount == 0)
- printk(KERN_ERR "tty_ldisc_deref: no references.\n");
- else
- ld->refcount--;
- if (ld->refcount == 0)
- wake_up(&tty_ldisc_wait);
- spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+ put_ldisc(ld);
}
EXPORT_SYMBOL_GPL(tty_ldisc_deref);
+static inline void tty_ldisc_put(struct tty_ldisc *ld)
+{
+ put_ldisc(ld);
+}
+
/**
* tty_ldisc_enable - allow ldisc use
* @tty: terminal to activate ldisc on
* be obtained while the delayed work queue halt ensures that no more
* data is fed to the ldisc.
*
- * In order to wait for any existing references to complete see
- * tty_ldisc_wait_idle.
+ * You need to do a 'flush_scheduled_work()' (outside the ldisc_mutex)
+ * in order to make sure any currently executing ldisc work is also
+ * flushed.
*/
static int tty_ldisc_halt(struct tty_struct *tty)
return cancel_delayed_work(&tty->buf.work);
}
-/**
- * tty_ldisc_wait_idle - wait for the ldisc to become idle
- * @tty: tty to wait for
- *
- * Wait for the line discipline to become idle. The discipline must
- * have been halted for this to guarantee it remains idle.
- *
- * tty_ldisc_lock protects the ref counts currently.
- */
-
-static int tty_ldisc_wait_idle(struct tty_struct *tty)
-{
- unsigned long flags;
- spin_lock_irqsave(&tty_ldisc_lock, flags);
- while (tty->ldisc->refcount) {
- spin_unlock_irqrestore(&tty_ldisc_lock, flags);
- if (wait_event_timeout(tty_ldisc_wait,
- tty->ldisc->refcount == 0, 5 * HZ) == 0)
- return -EBUSY;
- spin_lock_irqsave(&tty_ldisc_lock, flags);
- }
- spin_unlock_irqrestore(&tty_ldisc_lock, flags);
- return 0;
-}
-
/**
* tty_set_ldisc - set line discipline
* @tty: the terminal to set
flush_scheduled_work();
- /* Let any existing reference holders finish */
- retval = tty_ldisc_wait_idle(tty);
- if (retval < 0) {
- clear_bit(TTY_LDISC_CHANGING, &tty->flags);
- tty_ldisc_put(new_ldisc);
- return retval;
- }
-
mutex_lock(&tty->ldisc_mutex);
if (test_bit(TTY_HUPPED, &tty->flags)) {
/* We were raced by the hangup method. It will have stomped
* N_TTY.
*/
if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) {
- /* Avoid racing set_ldisc */
- mutex_lock(&tty->ldisc_mutex);
- /* Switch back to N_TTY */
+ /* Make sure the old ldisc is quiescent */
tty_ldisc_halt(tty);
- tty_ldisc_wait_idle(tty);
- tty_ldisc_reinit(tty);
- /* At this point we have a closed ldisc and we want to
- reopen it. We could defer this to the next open but
- it means auditing a lot of other paths so this is a FIXME */
- WARN_ON(tty_ldisc_open(tty, tty->ldisc));
- tty_ldisc_enable(tty);
+ flush_scheduled_work();
+
+ /* Avoid racing set_ldisc or tty_ldisc_release */
+ mutex_lock(&tty->ldisc_mutex);
+ if (tty->ldisc) { /* Not yet closed */
+ /* Switch back to N_TTY */
+ tty_ldisc_reinit(tty);
+ /* At this point we have a closed ldisc and we want to
+ reopen it. We could defer this to the next open but
+ it means auditing a lot of other paths so this is
+ a FIXME */
+ WARN_ON(tty_ldisc_open(tty, tty->ldisc));
+ tty_ldisc_enable(tty);
+ }
mutex_unlock(&tty->ldisc_mutex);
tty_reset_termios(tty);
}
tty_ldisc_halt(tty);
flush_scheduled_work();
- /*
- * Wait for any short term users (we know they are just driver
- * side waiters as the file is closing so user count on the file
- * side is zero.
- */
-
- tty_ldisc_wait_idle(tty);
-
+ mutex_lock(&tty->ldisc_mutex);
/*
* Now kill off the ldisc
*/
/* Ensure the next open requests the N_TTY ldisc */
tty_set_termios_ldisc(tty, N_TTY);
+ mutex_unlock(&tty->ldisc_mutex);
/* This will need doing differently if we need to lock */
if (o_tty)
if (retval == 0)
port->flags |= ASYNC_NORMAL_ACTIVE;
spin_unlock_irqrestore(&port->lock, flags);
- return 0;
+ return retval;
}
EXPORT_SYMBOL(tty_port_block_til_ready);
int __init vcs_init(void)
{
+ unsigned int i;
+
if (register_chrdev(VCS_MAJOR, "vcs", &vcs_fops))
panic("unable to get major %d for vcs device", VCS_MAJOR);
vc_class = class_create(THIS_MODULE, "vc");
device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 0), NULL, "vcs");
device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 128), NULL, "vcsa");
+ for (i = 0; i < MIN_NR_CONSOLES; i++)
+ vcs_make_sysfs(i);
return 0;
}
visual_init(vc, currcons, 1);
if (!*vc->vc_uni_pagedir_loc)
con_set_default_unimap(vc);
- if (!vc->vc_kmalloced)
- vc->vc_screenbuf = kmalloc(vc->vc_screenbuf_size, GFP_KERNEL);
+ vc->vc_screenbuf = kmalloc(vc->vc_screenbuf_size, GFP_KERNEL);
if (!vc->vc_screenbuf) {
kfree(vc);
vc_cons[currcons].d = NULL;
return -ENOMEM;
}
- vc->vc_kmalloced = 1;
vc_init(vc, vc->vc_rows, vc->vc_cols, 1);
vcs_make_sysfs(currcons);
atomic_notifier_call_chain(&vt_notifier_list, VT_ALLOCATE, ¶m);
if (new_scr_end > new_origin)
scr_memsetw((void *)new_origin, vc->vc_video_erase_char,
new_scr_end - new_origin);
- if (vc->vc_kmalloced)
- kfree(vc->vc_screenbuf);
+ kfree(vc->vc_screenbuf);
vc->vc_screenbuf = newscreen;
- vc->vc_kmalloced = 1;
vc->vc_screenbuf_size = new_screen_size;
set_origin(vc);
vc->vc_sw->con_deinit(vc);
put_pid(vc->vt_pid);
module_put(vc->vc_sw->owner);
- if (vc->vc_kmalloced)
- kfree(vc->vc_screenbuf);
+ kfree(vc->vc_screenbuf);
if (currcons >= MIN_NR_CONSOLES)
kfree(vc);
vc_cons[currcons].d = NULL;
INIT_WORK(&vc_cons[currcons].SAK_work, vc_SAK);
visual_init(vc, currcons, 1);
vc->vc_screenbuf = kzalloc(vc->vc_screenbuf_size, GFP_NOWAIT);
- vc->vc_kmalloced = 0;
vc_init(vc, vc->vc_rows, vc->vc_cols,
currcons || !vc->vc_sw->con_save_screen);
}
struct platform_device *pdev;
unsigned long flags;
+ unsigned long flags_suspend;
unsigned long match_value;
unsigned long next_match_value;
unsigned long max_match_value;
return -EBUSY; /* cannot unregister clockevent and clocksource */
}
+static int sh_cmt_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct sh_cmt_priv *p = platform_get_drvdata(pdev);
+
+ /* save flag state and stop CMT channel */
+ p->flags_suspend = p->flags;
+ sh_cmt_stop(p, p->flags);
+ return 0;
+}
+
+static int sh_cmt_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct sh_cmt_priv *p = platform_get_drvdata(pdev);
+
+ /* start CMT channel from saved state */
+ sh_cmt_start(p, p->flags_suspend);
+ return 0;
+}
+
+static struct dev_pm_ops sh_cmt_dev_pm_ops = {
+ .suspend = sh_cmt_suspend,
+ .resume = sh_cmt_resume,
+};
+
static struct platform_driver sh_cmt_device_driver = {
.probe = sh_cmt_probe,
.remove = __devexit_p(sh_cmt_remove),
.driver = {
.name = "sh_cmt",
+ .pm = &sh_cmt_dev_pm_ops,
}
};
/*
* cn_queue.c
*
- * 2004-2005 Copyright (c) Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * 2004+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net>
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
/*
* connector.c
*
- * 2004-2005 Copyright (c) Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * 2004+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net>
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
#include <net/sock.h>
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>");
+MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
MODULE_DESCRIPTION("Generic userspace <-> kernelspace connector.");
static u32 cn_idx = CN_IDX_CONNECTOR;
/* Check for existing affected CPUs.
* They may not be aware of it due to CPU Hotplug.
+ * cpufreq_cpu_put is called when the device is removed
+ * in __cpufreq_remove_dev()
*/
managed_policy = cpufreq_cpu_get(j);
if (unlikely(managed_policy)) {
ret = sysfs_create_link(&sys_dev->kobj,
&managed_policy->kobj,
"cpufreq");
- if (!ret)
+ if (ret)
cpufreq_cpu_put(managed_policy);
/*
* Success. We only needed to be added to the mask.
spin_lock_irqsave(&cpufreq_driver_lock, flags);
for_each_cpu(j, policy->cpus) {
+ if (!cpu_online(j))
+ continue;
per_cpu(cpufreq_cpu_data, j) = policy;
per_cpu(policy_cpu, j) = policy->cpu;
}
static int cpufreq_suspend(struct sys_device *sysdev, pm_message_t pmsg)
{
- int cpu = sysdev->id;
int ret = 0;
- unsigned int cur_freq = 0;
+
+ int cpu = sysdev->id;
struct cpufreq_policy *cpu_policy;
dprintk("suspending cpu %u\n", cpu);
if (cpufreq_driver->suspend) {
ret = cpufreq_driver->suspend(cpu_policy, pmsg);
- if (ret) {
+ if (ret)
printk(KERN_ERR "cpufreq: suspend failed in ->suspend "
"step on CPU %u\n", cpu_policy->cpu);
- goto out;
- }
- }
-
- if (cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)
- goto out;
-
- if (cpufreq_driver->get)
- cur_freq = cpufreq_driver->get(cpu_policy->cpu);
-
- if (!cur_freq || !cpu_policy->cur) {
- printk(KERN_ERR "cpufreq: suspend failed to assert current "
- "frequency is what timing core thinks it is.\n");
- goto out;
- }
-
- if (unlikely(cur_freq != cpu_policy->cur)) {
- struct cpufreq_freqs freqs;
-
- if (!(cpufreq_driver->flags & CPUFREQ_PM_NO_WARN))
- dprintk("Warning: CPU frequency is %u, "
- "cpufreq assumed %u kHz.\n",
- cur_freq, cpu_policy->cur);
-
- freqs.cpu = cpu;
- freqs.old = cpu_policy->cur;
- freqs.new = cur_freq;
-
- srcu_notifier_call_chain(&cpufreq_transition_notifier_list,
- CPUFREQ_SUSPENDCHANGE, &freqs);
- adjust_jiffies(CPUFREQ_SUSPENDCHANGE, &freqs);
-
- cpu_policy->cur = cur_freq;
}
out:
* cpufreq_resume - restore proper CPU frequency handling after resume
*
* 1.) resume CPUfreq hardware support (cpufreq_driver->resume())
- * 2.) if ->target and !CPUFREQ_CONST_LOOPS: verify we're in sync
- * 3.) schedule call cpufreq_update_policy() ASAP as interrupts are
- * restored.
+ * 2.) schedule call cpufreq_update_policy() ASAP as interrupts are
+ * restored. It will verify that the current freq is in sync with
+ * what we believe it to be. This is a bit later than when it
+ * should be, but nonethteless it's better than calling
+ * cpufreq_driver->get() here which might re-enable interrupts...
*/
static int cpufreq_resume(struct sys_device *sysdev)
{
- int cpu = sysdev->id;
int ret = 0;
+
+ int cpu = sysdev->id;
struct cpufreq_policy *cpu_policy;
dprintk("resuming cpu %u\n", cpu);
}
}
- if (!(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)) {
- unsigned int cur_freq = 0;
-
- if (cpufreq_driver->get)
- cur_freq = cpufreq_driver->get(cpu_policy->cpu);
-
- if (!cur_freq || !cpu_policy->cur) {
- printk(KERN_ERR "cpufreq: resume failed to assert "
- "current frequency is what timing core "
- "thinks it is.\n");
- goto out;
- }
-
- if (unlikely(cur_freq != cpu_policy->cur)) {
- struct cpufreq_freqs freqs;
-
- if (!(cpufreq_driver->flags & CPUFREQ_PM_NO_WARN))
- dprintk("Warning: CPU frequency "
- "is %u, cpufreq assumed %u kHz.\n",
- cur_freq, cpu_policy->cur);
-
- freqs.cpu = cpu;
- freqs.old = cpu_policy->cur;
- freqs.new = cur_freq;
-
- srcu_notifier_call_chain(
- &cpufreq_transition_notifier_list,
- CPUFREQ_RESUMECHANGE, &freqs);
- adjust_jiffies(CPUFREQ_RESUMECHANGE, &freqs);
-
- cpu_policy->cur = cur_freq;
- }
- }
-
-out:
schedule_work(&cpu_policy->update);
+
fail:
cpufreq_cpu_put(cpu_policy);
return ret;
unsigned int down_skip;
unsigned int requested_freq;
int cpu;
+ unsigned int enable:1;
/*
* percpu mutex that serializes governor limit change with
* do_dbs_timer invocation. We do not want do_dbs_timer to run
struct cpufreq_policy *policy;
+ if (!this_dbs_info->enable)
+ return 0;
+
policy = this_dbs_info->cur_policy;
/*
int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
delay -= jiffies % delay;
+ dbs_info->enable = 1;
INIT_DELAYED_WORK_DEFERRABLE(&dbs_info->work, do_dbs_timer);
queue_delayed_work_on(dbs_info->cpu, kconservative_wq, &dbs_info->work,
delay);
static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info)
{
+ dbs_info->enable = 0;
cancel_delayed_work_sync(&dbs_info->work);
}
config CRYPTO_DEV_PADLOCK
tristate "Support for VIA PadLock ACE"
depends on X86 && !UML
- select CRYPTO_ALGAPI
help
Some VIA processors come with an integrated crypto engine
(so called VIA PadLock ACE, Advanced Cryptography Engine)
config CRYPTO_DEV_PADLOCK_SHA
tristate "PadLock driver for SHA1 and SHA256 algorithms"
depends on CRYPTO_DEV_PADLOCK
+ select CRYPTO_HASH
select CRYPTO_SHA1
select CRYPTO_SHA256
help
ANSI X9.17 standard. The PRNG is usable via the char device
/dev/prandom.
+config CRYPTO_DEV_MV_CESA
+ tristate "Marvell's Cryptographic Engine"
+ depends on PLAT_ORION
+ select CRYPTO_ALGAPI
+ select CRYPTO_AES
+ select CRYPTO_BLKCIPHER2
+ help
+ This driver allows you to utilize the Cryptographic Engines and
+ Security Accelerator (CESA) which can be found on the Marvell Orion
+ and Kirkwood SoCs, such as QNAP's TS-209.
+
+ Currently the driver supports AES in ECB and CBC mode without DMA.
+
config CRYPTO_DEV_HIFN_795X
tristate "Driver HIFN 795x crypto accelerator chips"
select CRYPTO_DES
obj-$(CONFIG_CRYPTO_DEV_PADLOCK_SHA) += padlock-sha.o
obj-$(CONFIG_CRYPTO_DEV_GEODE) += geode-aes.o
obj-$(CONFIG_CRYPTO_DEV_HIFN_795X) += hifn_795x.o
+obj-$(CONFIG_CRYPTO_DEV_MV_CESA) += mv_cesa.o
obj-$(CONFIG_CRYPTO_DEV_TALITOS) += talitos.o
obj-$(CONFIG_CRYPTO_DEV_IXP4XX) += ixp4xx_crypto.o
obj-$(CONFIG_CRYPTO_DEV_PPC4XX) += amcc/
}
}
- tfm->crt_ahash.reqsize = sizeof(struct crypto4xx_ctx);
+ crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm),
+ sizeof(struct crypto4xx_ctx));
sa = (struct dynamic_sa_ctl *) ctx->sa_in;
set_dynamic_sa_command_0(sa, SA_SAVE_HASH, SA_NOT_SAVE_IV,
SA_NOT_LOAD_HASH, SA_LOAD_IV_FROM_SA,
#include <asm/dcr.h>
#include <asm/dcr-regs.h>
#include <asm/cacheflush.h>
-#include <crypto/internal/hash.h>
-#include <crypto/algapi.h>
#include <crypto/aes.h>
#include <crypto/sha.h>
#include "crypto4xx_reg_def.h"
ctx->sa_out_dma_addr = 0;
ctx->sa_len = 0;
- if (alg->cra_type == &crypto_ablkcipher_type)
+ switch (alg->cra_flags & CRYPTO_ALG_TYPE_MASK) {
+ default:
tfm->crt_ablkcipher.reqsize = sizeof(struct crypto4xx_ctx);
- else if (alg->cra_type == &crypto_ahash_type)
- tfm->crt_ahash.reqsize = sizeof(struct crypto4xx_ctx);
+ break;
+ case CRYPTO_ALG_TYPE_AHASH:
+ crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm),
+ sizeof(struct crypto4xx_ctx));
+ break;
+ }
return 0;
}
}
int crypto4xx_register_alg(struct crypto4xx_device *sec_dev,
- struct crypto_alg *crypto_alg, int array_size)
+ struct crypto4xx_alg_common *crypto_alg,
+ int array_size)
{
struct crypto4xx_alg *alg;
int i;
return -ENOMEM;
alg->alg = crypto_alg[i];
- INIT_LIST_HEAD(&alg->alg.cra_list);
- if (alg->alg.cra_init == NULL)
- alg->alg.cra_init = crypto4xx_alg_init;
- if (alg->alg.cra_exit == NULL)
- alg->alg.cra_exit = crypto4xx_alg_exit;
alg->dev = sec_dev;
- rc = crypto_register_alg(&alg->alg);
+
+ switch (alg->alg.type) {
+ case CRYPTO_ALG_TYPE_AHASH:
+ rc = crypto_register_ahash(&alg->alg.u.hash);
+ break;
+
+ default:
+ rc = crypto_register_alg(&alg->alg.u.cipher);
+ break;
+ }
+
if (rc) {
list_del(&alg->entry);
kfree(alg);
list_for_each_entry_safe(alg, tmp, &sec_dev->alg_list, entry) {
list_del(&alg->entry);
- crypto_unregister_alg(&alg->alg);
+ switch (alg->alg.type) {
+ case CRYPTO_ALG_TYPE_AHASH:
+ crypto_unregister_ahash(&alg->alg.u.hash);
+ break;
+
+ default:
+ crypto_unregister_alg(&alg->alg.u.cipher);
+ }
kfree(alg);
}
}
/**
* Supported Crypto Algorithms
*/
-struct crypto_alg crypto4xx_alg[] = {
+struct crypto4xx_alg_common crypto4xx_alg[] = {
/* Crypto AES modes */
- {
+ { .type = CRYPTO_ALG_TYPE_ABLKCIPHER, .u.cipher = {
.cra_name = "cbc(aes)",
.cra_driver_name = "cbc-aes-ppc4xx",
.cra_priority = CRYPTO4XX_CRYPTO_PRIORITY,
.cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC,
.cra_blocksize = AES_BLOCK_SIZE,
.cra_ctxsize = sizeof(struct crypto4xx_ctx),
- .cra_alignmask = 0,
.cra_type = &crypto_ablkcipher_type,
+ .cra_init = crypto4xx_alg_init,
+ .cra_exit = crypto4xx_alg_exit,
.cra_module = THIS_MODULE,
.cra_u = {
.ablkcipher = {
.decrypt = crypto4xx_decrypt,
}
}
- },
- /* Hash SHA1 */
- {
- .cra_name = "sha1",
- .cra_driver_name = "sha1-ppc4xx",
- .cra_priority = CRYPTO4XX_CRYPTO_PRIORITY,
- .cra_flags = CRYPTO_ALG_TYPE_AHASH | CRYPTO_ALG_ASYNC,
- .cra_blocksize = SHA1_BLOCK_SIZE,
- .cra_ctxsize = sizeof(struct crypto4xx_ctx),
- .cra_alignmask = 0,
- .cra_type = &crypto_ahash_type,
- .cra_init = crypto4xx_sha1_alg_init,
- .cra_module = THIS_MODULE,
- .cra_u = {
- .ahash = {
- .digestsize = SHA1_DIGEST_SIZE,
- .init = crypto4xx_hash_init,
- .update = crypto4xx_hash_update,
- .final = crypto4xx_hash_final,
- .digest = crypto4xx_hash_digest,
- }
- }
- },
+ }},
};
/**
#ifndef __CRYPTO4XX_CORE_H__
#define __CRYPTO4XX_CORE_H__
+#include <crypto/internal/hash.h>
+
#define PPC460SX_SDR0_SRST 0x201
#define PPC405EX_SDR0_SRST 0x200
#define PPC460EX_SDR0_SRST 0x201
u16 sa_len;
};
+struct crypto4xx_alg_common {
+ u32 type;
+ union {
+ struct crypto_alg cipher;
+ struct ahash_alg hash;
+ } u;
+};
+
struct crypto4xx_alg {
struct list_head entry;
- struct crypto_alg alg;
+ struct crypto4xx_alg_common alg;
struct crypto4xx_device *dev;
};
-#define crypto_alg_to_crypto4xx_alg(x) \
- container_of(x, struct crypto4xx_alg, alg)
+static inline struct crypto4xx_alg *crypto_alg_to_crypto4xx_alg(
+ struct crypto_alg *x)
+{
+ switch (x->cra_flags & CRYPTO_ALG_TYPE_MASK) {
+ case CRYPTO_ALG_TYPE_AHASH:
+ return container_of(__crypto_ahash_alg(x),
+ struct crypto4xx_alg, alg.u.hash);
+ }
+
+ return container_of(x, struct crypto4xx_alg, alg.u.cipher);
+}
extern int crypto4xx_alloc_sa(struct crypto4xx_ctx *ctx, u32 size);
extern void crypto4xx_free_sa(struct crypto4xx_ctx *ctx);
--- /dev/null
+/*
+ * Support for Marvell's crypto engine which can be found on some Orion5X
+ * boards.
+ *
+ * Author: Sebastian Andrzej Siewior < sebastian at breakpoint dot cc >
+ * License: GPLv2
+ *
+ */
+#include <crypto/aes.h>
+#include <crypto/algapi.h>
+#include <linux/crypto.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kthread.h>
+#include <linux/platform_device.h>
+#include <linux/scatterlist.h>
+
+#include "mv_cesa.h"
+/*
+ * STM:
+ * /---------------------------------------\
+ * | | request complete
+ * \./ |
+ * IDLE -> new request -> BUSY -> done -> DEQUEUE
+ * /°\ |
+ * | | more scatter entries
+ * \________________/
+ */
+enum engine_status {
+ ENGINE_IDLE,
+ ENGINE_BUSY,
+ ENGINE_W_DEQUEUE,
+};
+
+/**
+ * struct req_progress - used for every crypt request
+ * @src_sg_it: sg iterator for src
+ * @dst_sg_it: sg iterator for dst
+ * @sg_src_left: bytes left in src to process (scatter list)
+ * @src_start: offset to add to src start position (scatter list)
+ * @crypt_len: length of current crypt process
+ * @sg_dst_left: bytes left dst to process in this scatter list
+ * @dst_start: offset to add to dst start position (scatter list)
+ * @total_req_bytes: total number of bytes processed (request).
+ *
+ * sg helper are used to iterate over the scatterlist. Since the size of the
+ * SRAM may be less than the scatter size, this struct struct is used to keep
+ * track of progress within current scatterlist.
+ */
+struct req_progress {
+ struct sg_mapping_iter src_sg_it;
+ struct sg_mapping_iter dst_sg_it;
+
+ /* src mostly */
+ int sg_src_left;
+ int src_start;
+ int crypt_len;
+ /* dst mostly */
+ int sg_dst_left;
+ int dst_start;
+ int total_req_bytes;
+};
+
+struct crypto_priv {
+ void __iomem *reg;
+ void __iomem *sram;
+ int irq;
+ struct task_struct *queue_th;
+
+ /* the lock protects queue and eng_st */
+ spinlock_t lock;
+ struct crypto_queue queue;
+ enum engine_status eng_st;
+ struct ablkcipher_request *cur_req;
+ struct req_progress p;
+ int max_req_size;
+ int sram_size;
+};
+
+static struct crypto_priv *cpg;
+
+struct mv_ctx {
+ u8 aes_enc_key[AES_KEY_LEN];
+ u32 aes_dec_key[8];
+ int key_len;
+ u32 need_calc_aes_dkey;
+};
+
+enum crypto_op {
+ COP_AES_ECB,
+ COP_AES_CBC,
+};
+
+struct mv_req_ctx {
+ enum crypto_op op;
+ int decrypt;
+};
+
+static void compute_aes_dec_key(struct mv_ctx *ctx)
+{
+ struct crypto_aes_ctx gen_aes_key;
+ int key_pos;
+
+ if (!ctx->need_calc_aes_dkey)
+ return;
+
+ crypto_aes_expand_key(&gen_aes_key, ctx->aes_enc_key, ctx->key_len);
+
+ key_pos = ctx->key_len + 24;
+ memcpy(ctx->aes_dec_key, &gen_aes_key.key_enc[key_pos], 4 * 4);
+ switch (ctx->key_len) {
+ case AES_KEYSIZE_256:
+ key_pos -= 2;
+ /* fall */
+ case AES_KEYSIZE_192:
+ key_pos -= 2;
+ memcpy(&ctx->aes_dec_key[4], &gen_aes_key.key_enc[key_pos],
+ 4 * 4);
+ break;
+ }
+ ctx->need_calc_aes_dkey = 0;
+}
+
+static int mv_setkey_aes(struct crypto_ablkcipher *cipher, const u8 *key,
+ unsigned int len)
+{
+ struct crypto_tfm *tfm = crypto_ablkcipher_tfm(cipher);
+ struct mv_ctx *ctx = crypto_tfm_ctx(tfm);
+
+ switch (len) {
+ case AES_KEYSIZE_128:
+ case AES_KEYSIZE_192:
+ case AES_KEYSIZE_256:
+ break;
+ default:
+ crypto_ablkcipher_set_flags(cipher, CRYPTO_TFM_RES_BAD_KEY_LEN);
+ return -EINVAL;
+ }
+ ctx->key_len = len;
+ ctx->need_calc_aes_dkey = 1;
+
+ memcpy(ctx->aes_enc_key, key, AES_KEY_LEN);
+ return 0;
+}
+
+static void setup_data_in(struct ablkcipher_request *req)
+{
+ int ret;
+ void *buf;
+
+ if (!cpg->p.sg_src_left) {
+ ret = sg_miter_next(&cpg->p.src_sg_it);
+ BUG_ON(!ret);
+ cpg->p.sg_src_left = cpg->p.src_sg_it.length;
+ cpg->p.src_start = 0;
+ }
+
+ cpg->p.crypt_len = min(cpg->p.sg_src_left, cpg->max_req_size);
+
+ buf = cpg->p.src_sg_it.addr;
+ buf += cpg->p.src_start;
+
+ memcpy(cpg->sram + SRAM_DATA_IN_START, buf, cpg->p.crypt_len);
+
+ cpg->p.sg_src_left -= cpg->p.crypt_len;
+ cpg->p.src_start += cpg->p.crypt_len;
+}
+
+static void mv_process_current_q(int first_block)
+{
+ struct ablkcipher_request *req = cpg->cur_req;
+ struct mv_ctx *ctx = crypto_tfm_ctx(req->base.tfm);
+ struct mv_req_ctx *req_ctx = ablkcipher_request_ctx(req);
+ struct sec_accel_config op;
+
+ switch (req_ctx->op) {
+ case COP_AES_ECB:
+ op.config = CFG_OP_CRYPT_ONLY | CFG_ENCM_AES | CFG_ENC_MODE_ECB;
+ break;
+ case COP_AES_CBC:
+ op.config = CFG_OP_CRYPT_ONLY | CFG_ENCM_AES | CFG_ENC_MODE_CBC;
+ op.enc_iv = ENC_IV_POINT(SRAM_DATA_IV) |
+ ENC_IV_BUF_POINT(SRAM_DATA_IV_BUF);
+ if (first_block)
+ memcpy(cpg->sram + SRAM_DATA_IV, req->info, 16);
+ break;
+ }
+ if (req_ctx->decrypt) {
+ op.config |= CFG_DIR_DEC;
+ memcpy(cpg->sram + SRAM_DATA_KEY_P, ctx->aes_dec_key,
+ AES_KEY_LEN);
+ } else {
+ op.config |= CFG_DIR_ENC;
+ memcpy(cpg->sram + SRAM_DATA_KEY_P, ctx->aes_enc_key,
+ AES_KEY_LEN);
+ }
+
+ switch (ctx->key_len) {
+ case AES_KEYSIZE_128:
+ op.config |= CFG_AES_LEN_128;
+ break;
+ case AES_KEYSIZE_192:
+ op.config |= CFG_AES_LEN_192;
+ break;
+ case AES_KEYSIZE_256:
+ op.config |= CFG_AES_LEN_256;
+ break;
+ }
+ op.enc_p = ENC_P_SRC(SRAM_DATA_IN_START) |
+ ENC_P_DST(SRAM_DATA_OUT_START);
+ op.enc_key_p = SRAM_DATA_KEY_P;
+
+ setup_data_in(req);
+ op.enc_len = cpg->p.crypt_len;
+ memcpy(cpg->sram + SRAM_CONFIG, &op,
+ sizeof(struct sec_accel_config));
+
+ writel(SRAM_CONFIG, cpg->reg + SEC_ACCEL_DESC_P0);
+ /* GO */
+ writel(SEC_CMD_EN_SEC_ACCL0, cpg->reg + SEC_ACCEL_CMD);
+
+ /*
+ * XXX: add timer if the interrupt does not occur for some mystery
+ * reason
+ */
+}
+
+static void mv_crypto_algo_completion(void)
+{
+ struct ablkcipher_request *req = cpg->cur_req;
+ struct mv_req_ctx *req_ctx = ablkcipher_request_ctx(req);
+
+ if (req_ctx->op != COP_AES_CBC)
+ return ;
+
+ memcpy(req->info, cpg->sram + SRAM_DATA_IV_BUF, 16);
+}
+
+static void dequeue_complete_req(void)
+{
+ struct ablkcipher_request *req = cpg->cur_req;
+ void *buf;
+ int ret;
+
+ cpg->p.total_req_bytes += cpg->p.crypt_len;
+ do {
+ int dst_copy;
+
+ if (!cpg->p.sg_dst_left) {
+ ret = sg_miter_next(&cpg->p.dst_sg_it);
+ BUG_ON(!ret);
+ cpg->p.sg_dst_left = cpg->p.dst_sg_it.length;
+ cpg->p.dst_start = 0;
+ }
+
+ buf = cpg->p.dst_sg_it.addr;
+ buf += cpg->p.dst_start;
+
+ dst_copy = min(cpg->p.crypt_len, cpg->p.sg_dst_left);
+
+ memcpy(buf, cpg->sram + SRAM_DATA_OUT_START, dst_copy);
+
+ cpg->p.sg_dst_left -= dst_copy;
+ cpg->p.crypt_len -= dst_copy;
+ cpg->p.dst_start += dst_copy;
+ } while (cpg->p.crypt_len > 0);
+
+ BUG_ON(cpg->eng_st != ENGINE_W_DEQUEUE);
+ if (cpg->p.total_req_bytes < req->nbytes) {
+ /* process next scatter list entry */
+ cpg->eng_st = ENGINE_BUSY;
+ mv_process_current_q(0);
+ } else {
+ sg_miter_stop(&cpg->p.src_sg_it);
+ sg_miter_stop(&cpg->p.dst_sg_it);
+ mv_crypto_algo_completion();
+ cpg->eng_st = ENGINE_IDLE;
+ req->base.complete(&req->base, 0);
+ }
+}
+
+static int count_sgs(struct scatterlist *sl, unsigned int total_bytes)
+{
+ int i = 0;
+
+ do {
+ total_bytes -= sl[i].length;
+ i++;
+
+ } while (total_bytes > 0);
+
+ return i;
+}
+
+static void mv_enqueue_new_req(struct ablkcipher_request *req)
+{
+ int num_sgs;
+
+ cpg->cur_req = req;
+ memset(&cpg->p, 0, sizeof(struct req_progress));
+
+ num_sgs = count_sgs(req->src, req->nbytes);
+ sg_miter_start(&cpg->p.src_sg_it, req->src, num_sgs, SG_MITER_FROM_SG);
+
+ num_sgs = count_sgs(req->dst, req->nbytes);
+ sg_miter_start(&cpg->p.dst_sg_it, req->dst, num_sgs, SG_MITER_TO_SG);
+ mv_process_current_q(1);
+}
+
+static int queue_manag(void *data)
+{
+ cpg->eng_st = ENGINE_IDLE;
+ do {
+ struct ablkcipher_request *req;
+ struct crypto_async_request *async_req = NULL;
+ struct crypto_async_request *backlog;
+
+ __set_current_state(TASK_INTERRUPTIBLE);
+
+ if (cpg->eng_st == ENGINE_W_DEQUEUE)
+ dequeue_complete_req();
+
+ spin_lock_irq(&cpg->lock);
+ if (cpg->eng_st == ENGINE_IDLE) {
+ backlog = crypto_get_backlog(&cpg->queue);
+ async_req = crypto_dequeue_request(&cpg->queue);
+ if (async_req) {
+ BUG_ON(cpg->eng_st != ENGINE_IDLE);
+ cpg->eng_st = ENGINE_BUSY;
+ }
+ }
+ spin_unlock_irq(&cpg->lock);
+
+ if (backlog) {
+ backlog->complete(backlog, -EINPROGRESS);
+ backlog = NULL;
+ }
+
+ if (async_req) {
+ req = container_of(async_req,
+ struct ablkcipher_request, base);
+ mv_enqueue_new_req(req);
+ async_req = NULL;
+ }
+
+ schedule();
+
+ } while (!kthread_should_stop());
+ return 0;
+}
+
+static int mv_handle_req(struct ablkcipher_request *req)
+{
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&cpg->lock, flags);
+ ret = ablkcipher_enqueue_request(&cpg->queue, req);
+ spin_unlock_irqrestore(&cpg->lock, flags);
+ wake_up_process(cpg->queue_th);
+ return ret;
+}
+
+static int mv_enc_aes_ecb(struct ablkcipher_request *req)
+{
+ struct mv_req_ctx *req_ctx = ablkcipher_request_ctx(req);
+
+ req_ctx->op = COP_AES_ECB;
+ req_ctx->decrypt = 0;
+
+ return mv_handle_req(req);
+}
+
+static int mv_dec_aes_ecb(struct ablkcipher_request *req)
+{
+ struct mv_ctx *ctx = crypto_tfm_ctx(req->base.tfm);
+ struct mv_req_ctx *req_ctx = ablkcipher_request_ctx(req);
+
+ req_ctx->op = COP_AES_ECB;
+ req_ctx->decrypt = 1;
+
+ compute_aes_dec_key(ctx);
+ return mv_handle_req(req);
+}
+
+static int mv_enc_aes_cbc(struct ablkcipher_request *req)
+{
+ struct mv_req_ctx *req_ctx = ablkcipher_request_ctx(req);
+
+ req_ctx->op = COP_AES_CBC;
+ req_ctx->decrypt = 0;
+
+ return mv_handle_req(req);
+}
+
+static int mv_dec_aes_cbc(struct ablkcipher_request *req)
+{
+ struct mv_ctx *ctx = crypto_tfm_ctx(req->base.tfm);
+ struct mv_req_ctx *req_ctx = ablkcipher_request_ctx(req);
+
+ req_ctx->op = COP_AES_CBC;
+ req_ctx->decrypt = 1;
+
+ compute_aes_dec_key(ctx);
+ return mv_handle_req(req);
+}
+
+static int mv_cra_init(struct crypto_tfm *tfm)
+{
+ tfm->crt_ablkcipher.reqsize = sizeof(struct mv_req_ctx);
+ return 0;
+}
+
+irqreturn_t crypto_int(int irq, void *priv)
+{
+ u32 val;
+
+ val = readl(cpg->reg + SEC_ACCEL_INT_STATUS);
+ if (!(val & SEC_INT_ACCEL0_DONE))
+ return IRQ_NONE;
+
+ val &= ~SEC_INT_ACCEL0_DONE;
+ writel(val, cpg->reg + FPGA_INT_STATUS);
+ writel(val, cpg->reg + SEC_ACCEL_INT_STATUS);
+ BUG_ON(cpg->eng_st != ENGINE_BUSY);
+ cpg->eng_st = ENGINE_W_DEQUEUE;
+ wake_up_process(cpg->queue_th);
+ return IRQ_HANDLED;
+}
+
+struct crypto_alg mv_aes_alg_ecb = {
+ .cra_name = "ecb(aes)",
+ .cra_driver_name = "mv-ecb-aes",
+ .cra_priority = 300,
+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC,
+ .cra_blocksize = 16,
+ .cra_ctxsize = sizeof(struct mv_ctx),
+ .cra_alignmask = 0,
+ .cra_type = &crypto_ablkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_init = mv_cra_init,
+ .cra_u = {
+ .ablkcipher = {
+ .min_keysize = AES_MIN_KEY_SIZE,
+ .max_keysize = AES_MAX_KEY_SIZE,
+ .setkey = mv_setkey_aes,
+ .encrypt = mv_enc_aes_ecb,
+ .decrypt = mv_dec_aes_ecb,
+ },
+ },
+};
+
+struct crypto_alg mv_aes_alg_cbc = {
+ .cra_name = "cbc(aes)",
+ .cra_driver_name = "mv-cbc-aes",
+ .cra_priority = 300,
+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC,
+ .cra_blocksize = AES_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct mv_ctx),
+ .cra_alignmask = 0,
+ .cra_type = &crypto_ablkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_init = mv_cra_init,
+ .cra_u = {
+ .ablkcipher = {
+ .ivsize = AES_BLOCK_SIZE,
+ .min_keysize = AES_MIN_KEY_SIZE,
+ .max_keysize = AES_MAX_KEY_SIZE,
+ .setkey = mv_setkey_aes,
+ .encrypt = mv_enc_aes_cbc,
+ .decrypt = mv_dec_aes_cbc,
+ },
+ },
+};
+
+static int mv_probe(struct platform_device *pdev)
+{
+ struct crypto_priv *cp;
+ struct resource *res;
+ int irq;
+ int ret;
+
+ if (cpg) {
+ printk(KERN_ERR "Second crypto dev?\n");
+ return -EEXIST;
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
+ if (!res)
+ return -ENXIO;
+
+ cp = kzalloc(sizeof(*cp), GFP_KERNEL);
+ if (!cp)
+ return -ENOMEM;
+
+ spin_lock_init(&cp->lock);
+ crypto_init_queue(&cp->queue, 50);
+ cp->reg = ioremap(res->start, res->end - res->start + 1);
+ if (!cp->reg) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sram");
+ if (!res) {
+ ret = -ENXIO;
+ goto err_unmap_reg;
+ }
+ cp->sram_size = res->end - res->start + 1;
+ cp->max_req_size = cp->sram_size - SRAM_CFG_SPACE;
+ cp->sram = ioremap(res->start, cp->sram_size);
+ if (!cp->sram) {
+ ret = -ENOMEM;
+ goto err_unmap_reg;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0 || irq == NO_IRQ) {
+ ret = irq;
+ goto err_unmap_sram;
+ }
+ cp->irq = irq;
+
+ platform_set_drvdata(pdev, cp);
+ cpg = cp;
+
+ cp->queue_th = kthread_run(queue_manag, cp, "mv_crypto");
+ if (IS_ERR(cp->queue_th)) {
+ ret = PTR_ERR(cp->queue_th);
+ goto err_thread;
+ }
+
+ ret = request_irq(irq, crypto_int, IRQF_DISABLED, dev_name(&pdev->dev),
+ cp);
+ if (ret)
+ goto err_unmap_sram;
+
+ writel(SEC_INT_ACCEL0_DONE, cpg->reg + SEC_ACCEL_INT_MASK);
+ writel(SEC_CFG_STOP_DIG_ERR, cpg->reg + SEC_ACCEL_CFG);
+
+ ret = crypto_register_alg(&mv_aes_alg_ecb);
+ if (ret)
+ goto err_reg;
+
+ ret = crypto_register_alg(&mv_aes_alg_cbc);
+ if (ret)
+ goto err_unreg_ecb;
+ return 0;
+err_unreg_ecb:
+ crypto_unregister_alg(&mv_aes_alg_ecb);
+err_thread:
+ free_irq(irq, cp);
+err_reg:
+ kthread_stop(cp->queue_th);
+err_unmap_sram:
+ iounmap(cp->sram);
+err_unmap_reg:
+ iounmap(cp->reg);
+err:
+ kfree(cp);
+ cpg = NULL;
+ platform_set_drvdata(pdev, NULL);
+ return ret;
+}
+
+static int mv_remove(struct platform_device *pdev)
+{
+ struct crypto_priv *cp = platform_get_drvdata(pdev);
+
+ crypto_unregister_alg(&mv_aes_alg_ecb);
+ crypto_unregister_alg(&mv_aes_alg_cbc);
+ kthread_stop(cp->queue_th);
+ free_irq(cp->irq, cp);
+ memset(cp->sram, 0, cp->sram_size);
+ iounmap(cp->sram);
+ iounmap(cp->reg);
+ kfree(cp);
+ cpg = NULL;
+ return 0;
+}
+
+static struct platform_driver marvell_crypto = {
+ .probe = mv_probe,
+ .remove = mv_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "mv_crypto",
+ },
+};
+MODULE_ALIAS("platform:mv_crypto");
+
+static int __init mv_crypto_init(void)
+{
+ return platform_driver_register(&marvell_crypto);
+}
+module_init(mv_crypto_init);
+
+static void __exit mv_crypto_exit(void)
+{
+ platform_driver_unregister(&marvell_crypto);
+}
+module_exit(mv_crypto_exit);
+
+MODULE_AUTHOR("Sebastian Andrzej Siewior <sebastian@breakpoint.cc>");
+MODULE_DESCRIPTION("Support for Marvell's cryptographic engine");
+MODULE_LICENSE("GPL");
--- /dev/null
+#ifndef __MV_CRYPTO_H__
+
+#define DIGEST_INITIAL_VAL_A 0xdd00
+#define DES_CMD_REG 0xdd58
+
+#define SEC_ACCEL_CMD 0xde00
+#define SEC_CMD_EN_SEC_ACCL0 (1 << 0)
+#define SEC_CMD_EN_SEC_ACCL1 (1 << 1)
+#define SEC_CMD_DISABLE_SEC (1 << 2)
+
+#define SEC_ACCEL_DESC_P0 0xde04
+#define SEC_DESC_P0_PTR(x) (x)
+
+#define SEC_ACCEL_DESC_P1 0xde14
+#define SEC_DESC_P1_PTR(x) (x)
+
+#define SEC_ACCEL_CFG 0xde08
+#define SEC_CFG_STOP_DIG_ERR (1 << 0)
+#define SEC_CFG_CH0_W_IDMA (1 << 7)
+#define SEC_CFG_CH1_W_IDMA (1 << 8)
+#define SEC_CFG_ACT_CH0_IDMA (1 << 9)
+#define SEC_CFG_ACT_CH1_IDMA (1 << 10)
+
+#define SEC_ACCEL_STATUS 0xde0c
+#define SEC_ST_ACT_0 (1 << 0)
+#define SEC_ST_ACT_1 (1 << 1)
+
+/*
+ * FPGA_INT_STATUS looks like a FPGA leftover and is documented only in Errata
+ * 4.12. It looks like that it was part of an IRQ-controller in FPGA and
+ * someone forgot to remove it while switching to the core and moving to
+ * SEC_ACCEL_INT_STATUS.
+ */
+#define FPGA_INT_STATUS 0xdd68
+#define SEC_ACCEL_INT_STATUS 0xde20
+#define SEC_INT_AUTH_DONE (1 << 0)
+#define SEC_INT_DES_E_DONE (1 << 1)
+#define SEC_INT_AES_E_DONE (1 << 2)
+#define SEC_INT_AES_D_DONE (1 << 3)
+#define SEC_INT_ENC_DONE (1 << 4)
+#define SEC_INT_ACCEL0_DONE (1 << 5)
+#define SEC_INT_ACCEL1_DONE (1 << 6)
+#define SEC_INT_ACC0_IDMA_DONE (1 << 7)
+#define SEC_INT_ACC1_IDMA_DONE (1 << 8)
+
+#define SEC_ACCEL_INT_MASK 0xde24
+
+#define AES_KEY_LEN (8 * 4)
+
+struct sec_accel_config {
+
+ u32 config;
+#define CFG_OP_MAC_ONLY 0
+#define CFG_OP_CRYPT_ONLY 1
+#define CFG_OP_MAC_CRYPT 2
+#define CFG_OP_CRYPT_MAC 3
+#define CFG_MACM_MD5 (4 << 4)
+#define CFG_MACM_SHA1 (5 << 4)
+#define CFG_MACM_HMAC_MD5 (6 << 4)
+#define CFG_MACM_HMAC_SHA1 (7 << 4)
+#define CFG_ENCM_DES (1 << 8)
+#define CFG_ENCM_3DES (2 << 8)
+#define CFG_ENCM_AES (3 << 8)
+#define CFG_DIR_ENC (0 << 12)
+#define CFG_DIR_DEC (1 << 12)
+#define CFG_ENC_MODE_ECB (0 << 16)
+#define CFG_ENC_MODE_CBC (1 << 16)
+#define CFG_3DES_EEE (0 << 20)
+#define CFG_3DES_EDE (1 << 20)
+#define CFG_AES_LEN_128 (0 << 24)
+#define CFG_AES_LEN_192 (1 << 24)
+#define CFG_AES_LEN_256 (2 << 24)
+
+ u32 enc_p;
+#define ENC_P_SRC(x) (x)
+#define ENC_P_DST(x) ((x) << 16)
+
+ u32 enc_len;
+#define ENC_LEN(x) (x)
+
+ u32 enc_key_p;
+#define ENC_KEY_P(x) (x)
+
+ u32 enc_iv;
+#define ENC_IV_POINT(x) ((x) << 0)
+#define ENC_IV_BUF_POINT(x) ((x) << 16)
+
+ u32 mac_src_p;
+#define MAC_SRC_DATA_P(x) (x)
+#define MAC_SRC_TOTAL_LEN(x) ((x) << 16)
+
+ u32 mac_digest;
+ u32 mac_iv;
+}__attribute__ ((packed));
+ /*
+ * /-----------\ 0
+ * | ACCEL CFG | 4 * 8
+ * |-----------| 0x20
+ * | CRYPT KEY | 8 * 4
+ * |-----------| 0x40
+ * | IV IN | 4 * 4
+ * |-----------| 0x40 (inplace)
+ * | IV BUF | 4 * 4
+ * |-----------| 0x50
+ * | DATA IN | 16 * x (max ->max_req_size)
+ * |-----------| 0x50 (inplace operation)
+ * | DATA OUT | 16 * x (max ->max_req_size)
+ * \-----------/ SRAM size
+ */
+#define SRAM_CONFIG 0x00
+#define SRAM_DATA_KEY_P 0x20
+#define SRAM_DATA_IV 0x40
+#define SRAM_DATA_IV_BUF 0x40
+#define SRAM_DATA_IN_START 0x50
+#define SRAM_DATA_OUT_START 0x50
+
+#define SRAM_CFG_SPACE 0x50
+
+#endif
*
*/
-#include <crypto/algapi.h>
+#include <crypto/internal/hash.h>
#include <crypto/sha.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/errno.h>
-#include <linux/cryptohash.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/scatterlist.h>
#include <asm/i387.h>
#include "padlock.h"
-#define SHA1_DEFAULT_FALLBACK "sha1-generic"
-#define SHA256_DEFAULT_FALLBACK "sha256-generic"
+struct padlock_sha_desc {
+ struct shash_desc fallback;
+};
struct padlock_sha_ctx {
- char *data;
- size_t used;
- int bypass;
- void (*f_sha_padlock)(const char *in, char *out, int count);
- struct hash_desc fallback;
+ struct crypto_shash *fallback;
};
-static inline struct padlock_sha_ctx *ctx(struct crypto_tfm *tfm)
-{
- return crypto_tfm_ctx(tfm);
-}
-
-/* We'll need aligned address on the stack */
-#define NEAREST_ALIGNED(ptr) \
- ((void *)ALIGN((size_t)(ptr), PADLOCK_ALIGNMENT))
-
-static struct crypto_alg sha1_alg, sha256_alg;
-
-static void padlock_sha_bypass(struct crypto_tfm *tfm)
+static int padlock_sha_init(struct shash_desc *desc)
{
- if (ctx(tfm)->bypass)
- return;
+ struct padlock_sha_desc *dctx = shash_desc_ctx(desc);
+ struct padlock_sha_ctx *ctx = crypto_shash_ctx(desc->tfm);
- crypto_hash_init(&ctx(tfm)->fallback);
- if (ctx(tfm)->data && ctx(tfm)->used) {
- struct scatterlist sg;
-
- sg_init_one(&sg, ctx(tfm)->data, ctx(tfm)->used);
- crypto_hash_update(&ctx(tfm)->fallback, &sg, sg.length);
- }
-
- ctx(tfm)->used = 0;
- ctx(tfm)->bypass = 1;
-}
-
-static void padlock_sha_init(struct crypto_tfm *tfm)
-{
- ctx(tfm)->used = 0;
- ctx(tfm)->bypass = 0;
+ dctx->fallback.tfm = ctx->fallback;
+ dctx->fallback.flags = desc->flags & CRYPTO_TFM_REQ_MAY_SLEEP;
+ return crypto_shash_init(&dctx->fallback);
}
-static void padlock_sha_update(struct crypto_tfm *tfm,
- const uint8_t *data, unsigned int length)
+static int padlock_sha_update(struct shash_desc *desc,
+ const u8 *data, unsigned int length)
{
- /* Our buffer is always one page. */
- if (unlikely(!ctx(tfm)->bypass &&
- (ctx(tfm)->used + length > PAGE_SIZE)))
- padlock_sha_bypass(tfm);
-
- if (unlikely(ctx(tfm)->bypass)) {
- struct scatterlist sg;
- sg_init_one(&sg, (uint8_t *)data, length);
- crypto_hash_update(&ctx(tfm)->fallback, &sg, length);
- return;
- }
+ struct padlock_sha_desc *dctx = shash_desc_ctx(desc);
- memcpy(ctx(tfm)->data + ctx(tfm)->used, data, length);
- ctx(tfm)->used += length;
+ dctx->fallback.flags = desc->flags & CRYPTO_TFM_REQ_MAY_SLEEP;
+ return crypto_shash_update(&dctx->fallback, data, length);
}
static inline void padlock_output_block(uint32_t *src,
*dst++ = swab32(*src++);
}
-static void padlock_do_sha1(const char *in, char *out, int count)
+static int padlock_sha1_finup(struct shash_desc *desc, const u8 *in,
+ unsigned int count, u8 *out)
{
/* We can't store directly to *out as it may be unaligned. */
/* BTW Don't reduce the buffer size below 128 Bytes!
* PadLock microcode needs it that big. */
- char buf[128+16];
- char *result = NEAREST_ALIGNED(buf);
+ char result[128] __attribute__ ((aligned(PADLOCK_ALIGNMENT)));
+ struct padlock_sha_desc *dctx = shash_desc_ctx(desc);
+ struct sha1_state state;
+ unsigned int space;
+ unsigned int leftover;
int ts_state;
+ int err;
+
+ dctx->fallback.flags = desc->flags & CRYPTO_TFM_REQ_MAY_SLEEP;
+ err = crypto_shash_export(&dctx->fallback, &state);
+ if (err)
+ goto out;
+
+ if (state.count + count > ULONG_MAX)
+ return crypto_shash_finup(&dctx->fallback, in, count, out);
+
+ leftover = ((state.count - 1) & (SHA1_BLOCK_SIZE - 1)) + 1;
+ space = SHA1_BLOCK_SIZE - leftover;
+ if (space) {
+ if (count > space) {
+ err = crypto_shash_update(&dctx->fallback, in, space) ?:
+ crypto_shash_export(&dctx->fallback, &state);
+ if (err)
+ goto out;
+ count -= space;
+ in += space;
+ } else {
+ memcpy(state.buffer + leftover, in, count);
+ in = state.buffer;
+ count += leftover;
+ state.count &= ~(SHA1_BLOCK_SIZE - 1);
+ }
+ }
+
+ memcpy(result, &state.state, SHA1_DIGEST_SIZE);
- ((uint32_t *)result)[0] = SHA1_H0;
- ((uint32_t *)result)[1] = SHA1_H1;
- ((uint32_t *)result)[2] = SHA1_H2;
- ((uint32_t *)result)[3] = SHA1_H3;
- ((uint32_t *)result)[4] = SHA1_H4;
-
/* prevent taking the spurious DNA fault with padlock. */
ts_state = irq_ts_save();
asm volatile (".byte 0xf3,0x0f,0xa6,0xc8" /* rep xsha1 */
- : "+S"(in), "+D"(result)
- : "c"(count), "a"(0));
+ : \
+ : "c"((unsigned long)state.count + count), \
+ "a"((unsigned long)state.count), \
+ "S"(in), "D"(result));
irq_ts_restore(ts_state);
padlock_output_block((uint32_t *)result, (uint32_t *)out, 5);
+
+out:
+ return err;
}
-static void padlock_do_sha256(const char *in, char *out, int count)
+static int padlock_sha1_final(struct shash_desc *desc, u8 *out)
+{
+ u8 buf[4];
+
+ return padlock_sha1_finup(desc, buf, 0, out);
+}
+
+static int padlock_sha256_finup(struct shash_desc *desc, const u8 *in,
+ unsigned int count, u8 *out)
{
/* We can't store directly to *out as it may be unaligned. */
/* BTW Don't reduce the buffer size below 128 Bytes!
* PadLock microcode needs it that big. */
- char buf[128+16];
- char *result = NEAREST_ALIGNED(buf);
+ char result[128] __attribute__ ((aligned(PADLOCK_ALIGNMENT)));
+ struct padlock_sha_desc *dctx = shash_desc_ctx(desc);
+ struct sha256_state state;
+ unsigned int space;
+ unsigned int leftover;
int ts_state;
+ int err;
+
+ dctx->fallback.flags = desc->flags & CRYPTO_TFM_REQ_MAY_SLEEP;
+ err = crypto_shash_export(&dctx->fallback, &state);
+ if (err)
+ goto out;
+
+ if (state.count + count > ULONG_MAX)
+ return crypto_shash_finup(&dctx->fallback, in, count, out);
+
+ leftover = ((state.count - 1) & (SHA256_BLOCK_SIZE - 1)) + 1;
+ space = SHA256_BLOCK_SIZE - leftover;
+ if (space) {
+ if (count > space) {
+ err = crypto_shash_update(&dctx->fallback, in, space) ?:
+ crypto_shash_export(&dctx->fallback, &state);
+ if (err)
+ goto out;
+ count -= space;
+ in += space;
+ } else {
+ memcpy(state.buf + leftover, in, count);
+ in = state.buf;
+ count += leftover;
+ state.count &= ~(SHA1_BLOCK_SIZE - 1);
+ }
+ }
- ((uint32_t *)result)[0] = SHA256_H0;
- ((uint32_t *)result)[1] = SHA256_H1;
- ((uint32_t *)result)[2] = SHA256_H2;
- ((uint32_t *)result)[3] = SHA256_H3;
- ((uint32_t *)result)[4] = SHA256_H4;
- ((uint32_t *)result)[5] = SHA256_H5;
- ((uint32_t *)result)[6] = SHA256_H6;
- ((uint32_t *)result)[7] = SHA256_H7;
+ memcpy(result, &state.state, SHA256_DIGEST_SIZE);
/* prevent taking the spurious DNA fault with padlock. */
ts_state = irq_ts_save();
asm volatile (".byte 0xf3,0x0f,0xa6,0xd0" /* rep xsha256 */
- : "+S"(in), "+D"(result)
- : "c"(count), "a"(0));
+ : \
+ : "c"((unsigned long)state.count + count), \
+ "a"((unsigned long)state.count), \
+ "S"(in), "D"(result));
irq_ts_restore(ts_state);
padlock_output_block((uint32_t *)result, (uint32_t *)out, 8);
+
+out:
+ return err;
}
-static void padlock_sha_final(struct crypto_tfm *tfm, uint8_t *out)
+static int padlock_sha256_final(struct shash_desc *desc, u8 *out)
{
- if (unlikely(ctx(tfm)->bypass)) {
- crypto_hash_final(&ctx(tfm)->fallback, out);
- ctx(tfm)->bypass = 0;
- return;
- }
+ u8 buf[4];
- /* Pass the input buffer to PadLock microcode... */
- ctx(tfm)->f_sha_padlock(ctx(tfm)->data, out, ctx(tfm)->used);
-
- ctx(tfm)->used = 0;
+ return padlock_sha256_finup(desc, buf, 0, out);
}
static int padlock_cra_init(struct crypto_tfm *tfm)
{
+ struct crypto_shash *hash = __crypto_shash_cast(tfm);
const char *fallback_driver_name = tfm->__crt_alg->cra_name;
- struct crypto_hash *fallback_tfm;
-
- /* For now we'll allocate one page. This
- * could eventually be configurable one day. */
- ctx(tfm)->data = (char *)__get_free_page(GFP_KERNEL);
- if (!ctx(tfm)->data)
- return -ENOMEM;
+ struct padlock_sha_ctx *ctx = crypto_tfm_ctx(tfm);
+ struct crypto_shash *fallback_tfm;
+ int err = -ENOMEM;
/* Allocate a fallback and abort if it failed. */
- fallback_tfm = crypto_alloc_hash(fallback_driver_name, 0,
- CRYPTO_ALG_ASYNC |
- CRYPTO_ALG_NEED_FALLBACK);
+ fallback_tfm = crypto_alloc_shash(fallback_driver_name, 0,
+ CRYPTO_ALG_NEED_FALLBACK);
if (IS_ERR(fallback_tfm)) {
printk(KERN_WARNING PFX "Fallback driver '%s' could not be loaded!\n",
fallback_driver_name);
- free_page((unsigned long)(ctx(tfm)->data));
- return PTR_ERR(fallback_tfm);
+ err = PTR_ERR(fallback_tfm);
+ goto out;
}
- ctx(tfm)->fallback.tfm = fallback_tfm;
+ ctx->fallback = fallback_tfm;
+ hash->descsize += crypto_shash_descsize(fallback_tfm);
return 0;
-}
-
-static int padlock_sha1_cra_init(struct crypto_tfm *tfm)
-{
- ctx(tfm)->f_sha_padlock = padlock_do_sha1;
- return padlock_cra_init(tfm);
-}
-
-static int padlock_sha256_cra_init(struct crypto_tfm *tfm)
-{
- ctx(tfm)->f_sha_padlock = padlock_do_sha256;
-
- return padlock_cra_init(tfm);
+out:
+ return err;
}
static void padlock_cra_exit(struct crypto_tfm *tfm)
{
- if (ctx(tfm)->data) {
- free_page((unsigned long)(ctx(tfm)->data));
- ctx(tfm)->data = NULL;
- }
+ struct padlock_sha_ctx *ctx = crypto_tfm_ctx(tfm);
- crypto_free_hash(ctx(tfm)->fallback.tfm);
- ctx(tfm)->fallback.tfm = NULL;
+ crypto_free_shash(ctx->fallback);
}
-static struct crypto_alg sha1_alg = {
- .cra_name = "sha1",
- .cra_driver_name = "sha1-padlock",
- .cra_priority = PADLOCK_CRA_PRIORITY,
- .cra_flags = CRYPTO_ALG_TYPE_DIGEST |
- CRYPTO_ALG_NEED_FALLBACK,
- .cra_blocksize = SHA1_BLOCK_SIZE,
- .cra_ctxsize = sizeof(struct padlock_sha_ctx),
- .cra_module = THIS_MODULE,
- .cra_list = LIST_HEAD_INIT(sha1_alg.cra_list),
- .cra_init = padlock_sha1_cra_init,
- .cra_exit = padlock_cra_exit,
- .cra_u = {
- .digest = {
- .dia_digestsize = SHA1_DIGEST_SIZE,
- .dia_init = padlock_sha_init,
- .dia_update = padlock_sha_update,
- .dia_final = padlock_sha_final,
- }
+static struct shash_alg sha1_alg = {
+ .digestsize = SHA1_DIGEST_SIZE,
+ .init = padlock_sha_init,
+ .update = padlock_sha_update,
+ .finup = padlock_sha1_finup,
+ .final = padlock_sha1_final,
+ .descsize = sizeof(struct padlock_sha_desc),
+ .base = {
+ .cra_name = "sha1",
+ .cra_driver_name = "sha1-padlock",
+ .cra_priority = PADLOCK_CRA_PRIORITY,
+ .cra_flags = CRYPTO_ALG_TYPE_SHASH |
+ CRYPTO_ALG_NEED_FALLBACK,
+ .cra_blocksize = SHA1_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct padlock_sha_ctx),
+ .cra_module = THIS_MODULE,
+ .cra_init = padlock_cra_init,
+ .cra_exit = padlock_cra_exit,
}
};
-static struct crypto_alg sha256_alg = {
- .cra_name = "sha256",
- .cra_driver_name = "sha256-padlock",
- .cra_priority = PADLOCK_CRA_PRIORITY,
- .cra_flags = CRYPTO_ALG_TYPE_DIGEST |
- CRYPTO_ALG_NEED_FALLBACK,
- .cra_blocksize = SHA256_BLOCK_SIZE,
- .cra_ctxsize = sizeof(struct padlock_sha_ctx),
- .cra_module = THIS_MODULE,
- .cra_list = LIST_HEAD_INIT(sha256_alg.cra_list),
- .cra_init = padlock_sha256_cra_init,
- .cra_exit = padlock_cra_exit,
- .cra_u = {
- .digest = {
- .dia_digestsize = SHA256_DIGEST_SIZE,
- .dia_init = padlock_sha_init,
- .dia_update = padlock_sha_update,
- .dia_final = padlock_sha_final,
- }
+static struct shash_alg sha256_alg = {
+ .digestsize = SHA256_DIGEST_SIZE,
+ .init = padlock_sha_init,
+ .update = padlock_sha_update,
+ .finup = padlock_sha256_finup,
+ .final = padlock_sha256_final,
+ .descsize = sizeof(struct padlock_sha_desc),
+ .base = {
+ .cra_name = "sha256",
+ .cra_driver_name = "sha256-padlock",
+ .cra_priority = PADLOCK_CRA_PRIORITY,
+ .cra_flags = CRYPTO_ALG_TYPE_SHASH |
+ CRYPTO_ALG_NEED_FALLBACK,
+ .cra_blocksize = SHA256_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct padlock_sha_ctx),
+ .cra_module = THIS_MODULE,
+ .cra_init = padlock_cra_init,
+ .cra_exit = padlock_cra_exit,
}
};
return -ENODEV;
}
- rc = crypto_register_alg(&sha1_alg);
+ rc = crypto_register_shash(&sha1_alg);
if (rc)
goto out;
- rc = crypto_register_alg(&sha256_alg);
+ rc = crypto_register_shash(&sha256_alg);
if (rc)
goto out_unreg1;
return 0;
out_unreg1:
- crypto_unregister_alg(&sha1_alg);
+ crypto_unregister_shash(&sha1_alg);
out:
printk(KERN_ERR PFX "VIA PadLock SHA1/SHA256 initialization failed.\n");
return rc;
static void __exit padlock_fini(void)
{
- crypto_unregister_alg(&sha1_alg);
- crypto_unregister_alg(&sha256_alg);
+ crypto_unregister_shash(&sha1_alg);
+ crypto_unregister_shash(&sha256_alg);
}
module_init(padlock_init);
void *context;
};
+/* per-channel fifo management */
+struct talitos_channel {
+ /* request fifo */
+ struct talitos_request *fifo;
+
+ /* number of requests pending in channel h/w fifo */
+ atomic_t submit_count ____cacheline_aligned;
+
+ /* request submission (head) lock */
+ spinlock_t head_lock ____cacheline_aligned;
+ /* index to next free descriptor request */
+ int head;
+
+ /* request release (tail) lock */
+ spinlock_t tail_lock ____cacheline_aligned;
+ /* index to next in-progress/done descriptor request */
+ int tail;
+};
+
struct talitos_private {
struct device *dev;
struct of_device *ofdev;
/* SEC Compatibility info */
unsigned long features;
- /* next channel to be assigned next incoming descriptor */
- atomic_t last_chan;
-
- /* per-channel number of requests pending in channel h/w fifo */
- atomic_t *submit_count;
-
- /* per-channel request fifo */
- struct talitos_request **fifo;
-
/*
* length of the request fifo
* fifo_len is chfifo_len rounded up to next power of 2
*/
unsigned int fifo_len;
- /* per-channel index to next free descriptor request */
- int *head;
-
- /* per-channel index to next in-progress/done descriptor request */
- int *tail;
+ struct talitos_channel *chan;
- /* per-channel request submission (head) and release (tail) locks */
- spinlock_t *head_lock;
- spinlock_t *tail_lock;
+ /* next channel to be assigned next incoming descriptor */
+ atomic_t last_chan ____cacheline_aligned;
/* request callback tasklet */
struct tasklet_struct done_task;
#define TALITOS_FTR_SRC_LINK_TBL_LEN_INCLUDES_EXTENT 0x00000001
#define TALITOS_FTR_HW_AUTH_CHECK 0x00000002
+static void to_talitos_ptr(struct talitos_ptr *talitos_ptr, dma_addr_t dma_addr)
+{
+ talitos_ptr->ptr = cpu_to_be32(lower_32_bits(dma_addr));
+ talitos_ptr->eptr = cpu_to_be32(upper_32_bits(dma_addr));
+}
+
/*
* map virtual single (contiguous) pointer to h/w descriptor pointer
*/
unsigned char extent,
enum dma_data_direction dir)
{
+ dma_addr_t dma_addr = dma_map_single(dev, data, len, dir);
+
talitos_ptr->len = cpu_to_be16(len);
- talitos_ptr->ptr = cpu_to_be32(dma_map_single(dev, data, len, dir));
+ to_talitos_ptr(talitos_ptr, dma_addr);
talitos_ptr->j_extent = extent;
}
return -EIO;
}
- /* set done writeback and IRQ */
- setbits32(priv->reg + TALITOS_CCCR_LO(ch), TALITOS_CCCR_LO_CDWE |
- TALITOS_CCCR_LO_CDIE);
+ /* set 36-bit addressing, done writeback enable and done IRQ enable */
+ setbits32(priv->reg + TALITOS_CCCR_LO(ch), TALITOS_CCCR_LO_EAE |
+ TALITOS_CCCR_LO_CDWE | TALITOS_CCCR_LO_CDIE);
/* and ICCR writeback, if available */
if (priv->features & TALITOS_FTR_HW_AUTH_CHECK)
/* emulate SEC's round-robin channel fifo polling scheme */
ch = atomic_inc_return(&priv->last_chan) & (priv->num_channels - 1);
- spin_lock_irqsave(&priv->head_lock[ch], flags);
+ spin_lock_irqsave(&priv->chan[ch].head_lock, flags);
- if (!atomic_inc_not_zero(&priv->submit_count[ch])) {
+ if (!atomic_inc_not_zero(&priv->chan[ch].submit_count)) {
/* h/w fifo is full */
- spin_unlock_irqrestore(&priv->head_lock[ch], flags);
+ spin_unlock_irqrestore(&priv->chan[ch].head_lock, flags);
return -EAGAIN;
}
- head = priv->head[ch];
- request = &priv->fifo[ch][head];
+ head = priv->chan[ch].head;
+ request = &priv->chan[ch].fifo[head];
/* map descriptor and save caller data */
request->dma_desc = dma_map_single(dev, desc, sizeof(*desc),
request->context = context;
/* increment fifo head */
- priv->head[ch] = (priv->head[ch] + 1) & (priv->fifo_len - 1);
+ priv->chan[ch].head = (priv->chan[ch].head + 1) & (priv->fifo_len - 1);
smp_wmb();
request->desc = desc;
/* GO! */
wmb();
- out_be32(priv->reg + TALITOS_FF_LO(ch), request->dma_desc);
+ out_be32(priv->reg + TALITOS_FF(ch),
+ cpu_to_be32(upper_32_bits(request->dma_desc)));
+ out_be32(priv->reg + TALITOS_FF_LO(ch),
+ cpu_to_be32(lower_32_bits(request->dma_desc)));
- spin_unlock_irqrestore(&priv->head_lock[ch], flags);
+ spin_unlock_irqrestore(&priv->chan[ch].head_lock, flags);
return -EINPROGRESS;
}
unsigned long flags;
int tail, status;
- spin_lock_irqsave(&priv->tail_lock[ch], flags);
+ spin_lock_irqsave(&priv->chan[ch].tail_lock, flags);
- tail = priv->tail[ch];
- while (priv->fifo[ch][tail].desc) {
- request = &priv->fifo[ch][tail];
+ tail = priv->chan[ch].tail;
+ while (priv->chan[ch].fifo[tail].desc) {
+ request = &priv->chan[ch].fifo[tail];
/* descriptors with their done bits set don't get the error */
rmb();
request->desc = NULL;
/* increment fifo tail */
- priv->tail[ch] = (tail + 1) & (priv->fifo_len - 1);
+ priv->chan[ch].tail = (tail + 1) & (priv->fifo_len - 1);
- spin_unlock_irqrestore(&priv->tail_lock[ch], flags);
+ spin_unlock_irqrestore(&priv->chan[ch].tail_lock, flags);
- atomic_dec(&priv->submit_count[ch]);
+ atomic_dec(&priv->chan[ch].submit_count);
saved_req.callback(dev, saved_req.desc, saved_req.context,
status);
/* channel may resume processing in single desc error case */
if (error && !reset_ch && status == error)
return;
- spin_lock_irqsave(&priv->tail_lock[ch], flags);
- tail = priv->tail[ch];
+ spin_lock_irqsave(&priv->chan[ch].tail_lock, flags);
+ tail = priv->chan[ch].tail;
}
- spin_unlock_irqrestore(&priv->tail_lock[ch], flags);
+ spin_unlock_irqrestore(&priv->chan[ch].tail_lock, flags);
}
/*
static struct talitos_desc *current_desc(struct device *dev, int ch)
{
struct talitos_private *priv = dev_get_drvdata(dev);
- int tail = priv->tail[ch];
+ int tail = priv->chan[ch].tail;
dma_addr_t cur_desc;
cur_desc = in_be32(priv->reg + TALITOS_CDPR_LO(ch));
- while (priv->fifo[ch][tail].dma_desc != cur_desc) {
+ while (priv->chan[ch].fifo[tail].dma_desc != cur_desc) {
tail = (tail + 1) & (priv->fifo_len - 1);
- if (tail == priv->tail[ch]) {
+ if (tail == priv->chan[ch].tail) {
dev_err(dev, "couldn't locate current descriptor\n");
return NULL;
}
}
- return priv->fifo[ch][tail].desc;
+ return priv->chan[ch].fifo[tail].desc;
}
/*
int n_sg = sg_count;
while (n_sg--) {
- link_tbl_ptr->ptr = cpu_to_be32(sg_dma_address(sg));
+ to_talitos_ptr(link_tbl_ptr, sg_dma_address(sg));
link_tbl_ptr->len = cpu_to_be16(sg_dma_len(sg));
link_tbl_ptr->j_extent = 0;
link_tbl_ptr++;
struct talitos_desc *desc = &edesc->desc;
unsigned int cryptlen = areq->cryptlen;
unsigned int authsize = ctx->authsize;
- unsigned int ivsize;
+ unsigned int ivsize = crypto_aead_ivsize(aead);
int sg_count, ret;
int sg_link_tbl_len;
map_single_talitos_ptr(dev, &desc->ptr[0], ctx->authkeylen, &ctx->key,
0, DMA_TO_DEVICE);
/* hmac data */
- map_single_talitos_ptr(dev, &desc->ptr[1], sg_virt(areq->src) -
- sg_virt(areq->assoc), sg_virt(areq->assoc), 0,
- DMA_TO_DEVICE);
+ map_single_talitos_ptr(dev, &desc->ptr[1], areq->assoclen + ivsize,
+ sg_virt(areq->assoc), 0, DMA_TO_DEVICE);
/* cipher iv */
- ivsize = crypto_aead_ivsize(aead);
map_single_talitos_ptr(dev, &desc->ptr[2], ivsize, giv ?: areq->iv, 0,
DMA_TO_DEVICE);
edesc->src_is_chained);
if (sg_count == 1) {
- desc->ptr[4].ptr = cpu_to_be32(sg_dma_address(areq->src));
+ to_talitos_ptr(&desc->ptr[4], sg_dma_address(areq->src));
} else {
sg_link_tbl_len = cryptlen;
&edesc->link_tbl[0]);
if (sg_count > 1) {
desc->ptr[4].j_extent |= DESC_PTR_LNKTBL_JUMP;
- desc->ptr[4].ptr = cpu_to_be32(edesc->dma_link_tbl);
+ to_talitos_ptr(&desc->ptr[4], edesc->dma_link_tbl);
dma_sync_single_for_device(dev, edesc->dma_link_tbl,
edesc->dma_len,
DMA_BIDIRECTIONAL);
} else {
/* Only one segment now, so no link tbl needed */
- desc->ptr[4].ptr = cpu_to_be32(sg_dma_address(areq->
- src));
+ to_talitos_ptr(&desc->ptr[4],
+ sg_dma_address(areq->src));
}
}
edesc->dst_is_chained);
if (sg_count == 1) {
- desc->ptr[5].ptr = cpu_to_be32(sg_dma_address(areq->dst));
+ to_talitos_ptr(&desc->ptr[5], sg_dma_address(areq->dst));
} else {
struct talitos_ptr *link_tbl_ptr =
&edesc->link_tbl[edesc->src_nents + 1];
- desc->ptr[5].ptr = cpu_to_be32((struct talitos_ptr *)
- edesc->dma_link_tbl +
- edesc->src_nents + 1);
+ to_talitos_ptr(&desc->ptr[5], edesc->dma_link_tbl +
+ (edesc->src_nents + 1) *
+ sizeof(struct talitos_ptr));
sg_count = sg_to_link_tbl(areq->dst, sg_count, cryptlen,
link_tbl_ptr);
link_tbl_ptr->len = cpu_to_be16(authsize);
/* icv data follows link tables */
- link_tbl_ptr->ptr = cpu_to_be32((struct talitos_ptr *)
- edesc->dma_link_tbl +
- edesc->src_nents +
- edesc->dst_nents + 2);
-
+ to_talitos_ptr(link_tbl_ptr, edesc->dma_link_tbl +
+ (edesc->src_nents + edesc->dst_nents + 2) *
+ sizeof(struct talitos_ptr));
desc->ptr[5].j_extent |= DESC_PTR_LNKTBL_JUMP;
dma_sync_single_for_device(ctx->dev, edesc->dma_link_tbl,
edesc->dma_len, DMA_BIDIRECTIONAL);
/* first DWORD empty */
desc->ptr[0].len = 0;
- desc->ptr[0].ptr = 0;
+ to_talitos_ptr(&desc->ptr[0], 0);
desc->ptr[0].j_extent = 0;
/* cipher iv */
edesc->src_is_chained);
if (sg_count == 1) {
- desc->ptr[3].ptr = cpu_to_be32(sg_dma_address(areq->src));
+ to_talitos_ptr(&desc->ptr[3], sg_dma_address(areq->src));
} else {
sg_count = sg_to_link_tbl(areq->src, sg_count, cryptlen,
&edesc->link_tbl[0]);
if (sg_count > 1) {
+ to_talitos_ptr(&desc->ptr[3], edesc->dma_link_tbl);
desc->ptr[3].j_extent |= DESC_PTR_LNKTBL_JUMP;
- desc->ptr[3].ptr = cpu_to_be32(edesc->dma_link_tbl);
dma_sync_single_for_device(dev, edesc->dma_link_tbl,
edesc->dma_len,
DMA_BIDIRECTIONAL);
} else {
/* Only one segment now, so no link tbl needed */
- desc->ptr[3].ptr = cpu_to_be32(sg_dma_address(areq->
- src));
+ to_talitos_ptr(&desc->ptr[3],
+ sg_dma_address(areq->src));
}
}
edesc->dst_is_chained);
if (sg_count == 1) {
- desc->ptr[4].ptr = cpu_to_be32(sg_dma_address(areq->dst));
+ to_talitos_ptr(&desc->ptr[4], sg_dma_address(areq->dst));
} else {
struct talitos_ptr *link_tbl_ptr =
&edesc->link_tbl[edesc->src_nents + 1];
+ to_talitos_ptr(&desc->ptr[4], edesc->dma_link_tbl +
+ (edesc->src_nents + 1) *
+ sizeof(struct talitos_ptr));
desc->ptr[4].j_extent |= DESC_PTR_LNKTBL_JUMP;
- desc->ptr[4].ptr = cpu_to_be32((struct talitos_ptr *)
- edesc->dma_link_tbl +
- edesc->src_nents + 1);
sg_count = sg_to_link_tbl(areq->dst, sg_count, cryptlen,
link_tbl_ptr);
dma_sync_single_for_device(ctx->dev, edesc->dma_link_tbl,
/* last DWORD empty */
desc->ptr[6].len = 0;
- desc->ptr[6].ptr = 0;
+ to_talitos_ptr(&desc->ptr[6], 0);
desc->ptr[6].j_extent = 0;
ret = talitos_submit(dev, desc, callback, areq);
if (hw_supports(dev, DESC_HDR_SEL0_RNG))
talitos_unregister_rng(dev);
- kfree(priv->submit_count);
- kfree(priv->tail);
- kfree(priv->head);
-
- if (priv->fifo)
- for (i = 0; i < priv->num_channels; i++)
- kfree(priv->fifo[i]);
+ for (i = 0; i < priv->num_channels; i++)
+ if (priv->chan[i].fifo)
+ kfree(priv->chan[i].fifo);
- kfree(priv->fifo);
- kfree(priv->head_lock);
- kfree(priv->tail_lock);
+ kfree(priv->chan);
if (priv->irq != NO_IRQ) {
free_irq(priv->irq, dev);
if (of_device_is_compatible(np, "fsl,sec2.1"))
priv->features |= TALITOS_FTR_HW_AUTH_CHECK;
- priv->head_lock = kmalloc(sizeof(spinlock_t) * priv->num_channels,
- GFP_KERNEL);
- priv->tail_lock = kmalloc(sizeof(spinlock_t) * priv->num_channels,
- GFP_KERNEL);
- if (!priv->head_lock || !priv->tail_lock) {
- dev_err(dev, "failed to allocate fifo locks\n");
+ priv->chan = kzalloc(sizeof(struct talitos_channel) *
+ priv->num_channels, GFP_KERNEL);
+ if (!priv->chan) {
+ dev_err(dev, "failed to allocate channel management space\n");
err = -ENOMEM;
goto err_out;
}
for (i = 0; i < priv->num_channels; i++) {
- spin_lock_init(&priv->head_lock[i]);
- spin_lock_init(&priv->tail_lock[i]);
- }
-
- priv->fifo = kmalloc(sizeof(struct talitos_request *) *
- priv->num_channels, GFP_KERNEL);
- if (!priv->fifo) {
- dev_err(dev, "failed to allocate request fifo\n");
- err = -ENOMEM;
- goto err_out;
+ spin_lock_init(&priv->chan[i].head_lock);
+ spin_lock_init(&priv->chan[i].tail_lock);
}
priv->fifo_len = roundup_pow_of_two(priv->chfifo_len);
for (i = 0; i < priv->num_channels; i++) {
- priv->fifo[i] = kzalloc(sizeof(struct talitos_request) *
- priv->fifo_len, GFP_KERNEL);
- if (!priv->fifo[i]) {
+ priv->chan[i].fifo = kzalloc(sizeof(struct talitos_request) *
+ priv->fifo_len, GFP_KERNEL);
+ if (!priv->chan[i].fifo) {
dev_err(dev, "failed to allocate request fifo %d\n", i);
err = -ENOMEM;
goto err_out;
}
}
- priv->submit_count = kmalloc(sizeof(atomic_t) * priv->num_channels,
- GFP_KERNEL);
- if (!priv->submit_count) {
- dev_err(dev, "failed to allocate fifo submit count space\n");
- err = -ENOMEM;
- goto err_out;
- }
for (i = 0; i < priv->num_channels; i++)
- atomic_set(&priv->submit_count[i], -(priv->chfifo_len - 1));
+ atomic_set(&priv->chan[i].submit_count,
+ -(priv->chfifo_len - 1));
- priv->head = kzalloc(sizeof(int) * priv->num_channels, GFP_KERNEL);
- priv->tail = kzalloc(sizeof(int) * priv->num_channels, GFP_KERNEL);
- if (!priv->head || !priv->tail) {
- dev_err(dev, "failed to allocate request index space\n");
- err = -ENOMEM;
- goto err_out;
- }
+ dma_set_mask(dev, DMA_BIT_MASK(36));
/* reset and initialize the h/w */
err = init_device(dev);
#define TALITOS_CCCR_RESET 0x1 /* channel reset */
#define TALITOS_CCCR_LO(ch) (ch * TALITOS_CH_STRIDE + 0x110c)
#define TALITOS_CCCR_LO_IWSE 0x80 /* chan. ICCR writeback enab. */
+#define TALITOS_CCCR_LO_EAE 0x20 /* extended address enable */
#define TALITOS_CCCR_LO_CDWE 0x10 /* chan. done writeback enab. */
#define TALITOS_CCCR_LO_NT 0x4 /* notification type */
#define TALITOS_CCCR_LO_CDIE 0x2 /* channel done IRQ enable */
menuconfig DMADEVICES
bool "DMA Engine support"
- depends on !HIGHMEM64G && HAS_DMA
+ depends on HAS_DMA
help
DMA engines can do asynchronous data transfers without
involving the host CPU. Currently, this framework can be
Support the Synopsys DesignWare AHB DMA controller. This
can be integrated in chips such as the Atmel AT32ap7000.
+config AT_HDMAC
+ tristate "Atmel AHB DMA support"
+ depends on ARCH_AT91SAM9RL
+ select DMA_ENGINE
+ help
+ Support the Atmel AHB DMA controller. This can be integrated in
+ chips such as the Atmel AT91SAM9RL.
+
config FSL_DMA
tristate "Freescale Elo and Elo Plus DMA support"
depends on FSL_SOC
config ASYNC_TX_DMA
bool "Async_tx: Offload support for the async_tx api"
- depends on DMA_ENGINE
+ depends on DMA_ENGINE && !HIGHMEM64G
help
This allows the async_tx api to take advantage of offload engines for
memcpy, memset, xor, and raid6 p+q operations. If your platform has
obj-$(CONFIG_FSL_DMA) += fsldma.o
obj-$(CONFIG_MV_XOR) += mv_xor.o
obj-$(CONFIG_DW_DMAC) += dw_dmac.o
+obj-$(CONFIG_AT_HDMAC) += at_hdmac.o
obj-$(CONFIG_MX3_IPU) += ipu/
obj-$(CONFIG_TXX9_DMAC) += txx9dmac.o
--- /dev/null
+/*
+ * Driver for the Atmel AHB DMA Controller (aka HDMA or DMAC on AT91 systems)
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ *
+ * This supports the Atmel AHB DMA Controller,
+ *
+ * The driver has currently been tested with the Atmel AT91SAM9RL
+ * and AT91SAM9G45 series.
+ */
+
+#include <linux/clk.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "at_hdmac_regs.h"
+
+/*
+ * Glossary
+ * --------
+ *
+ * at_hdmac : Name of the ATmel AHB DMA Controller
+ * at_dma_ / atdma : ATmel DMA controller entity related
+ * atc_ / atchan : ATmel DMA Channel entity related
+ */
+
+#define ATC_DEFAULT_CFG (ATC_FIFOCFG_HALFFIFO)
+#define ATC_DEFAULT_CTRLA (0)
+#define ATC_DEFAULT_CTRLB (ATC_SIF(0) \
+ |ATC_DIF(1))
+
+/*
+ * Initial number of descriptors to allocate for each channel. This could
+ * be increased during dma usage.
+ */
+static unsigned int init_nr_desc_per_channel = 64;
+module_param(init_nr_desc_per_channel, uint, 0644);
+MODULE_PARM_DESC(init_nr_desc_per_channel,
+ "initial descriptors per channel (default: 64)");
+
+
+/* prototypes */
+static dma_cookie_t atc_tx_submit(struct dma_async_tx_descriptor *tx);
+
+
+/*----------------------------------------------------------------------*/
+
+static struct at_desc *atc_first_active(struct at_dma_chan *atchan)
+{
+ return list_first_entry(&atchan->active_list,
+ struct at_desc, desc_node);
+}
+
+static struct at_desc *atc_first_queued(struct at_dma_chan *atchan)
+{
+ return list_first_entry(&atchan->queue,
+ struct at_desc, desc_node);
+}
+
+/**
+ * atc_alloc_descriptor - allocate and return an initilized descriptor
+ * @chan: the channel to allocate descriptors for
+ * @gfp_flags: GFP allocation flags
+ *
+ * Note: The ack-bit is positioned in the descriptor flag at creation time
+ * to make initial allocation more convenient. This bit will be cleared
+ * and control will be given to client at usage time (during
+ * preparation functions).
+ */
+static struct at_desc *atc_alloc_descriptor(struct dma_chan *chan,
+ gfp_t gfp_flags)
+{
+ struct at_desc *desc = NULL;
+ struct at_dma *atdma = to_at_dma(chan->device);
+ dma_addr_t phys;
+
+ desc = dma_pool_alloc(atdma->dma_desc_pool, gfp_flags, &phys);
+ if (desc) {
+ memset(desc, 0, sizeof(struct at_desc));
+ dma_async_tx_descriptor_init(&desc->txd, chan);
+ /* txd.flags will be overwritten in prep functions */
+ desc->txd.flags = DMA_CTRL_ACK;
+ desc->txd.tx_submit = atc_tx_submit;
+ desc->txd.phys = phys;
+ }
+
+ return desc;
+}
+
+/**
+ * atc_desc_get - get a unsused descriptor from free_list
+ * @atchan: channel we want a new descriptor for
+ */
+static struct at_desc *atc_desc_get(struct at_dma_chan *atchan)
+{
+ struct at_desc *desc, *_desc;
+ struct at_desc *ret = NULL;
+ unsigned int i = 0;
+ LIST_HEAD(tmp_list);
+
+ spin_lock_bh(&atchan->lock);
+ list_for_each_entry_safe(desc, _desc, &atchan->free_list, desc_node) {
+ i++;
+ if (async_tx_test_ack(&desc->txd)) {
+ list_del(&desc->desc_node);
+ ret = desc;
+ break;
+ }
+ dev_dbg(chan2dev(&atchan->chan_common),
+ "desc %p not ACKed\n", desc);
+ }
+ spin_unlock_bh(&atchan->lock);
+ dev_vdbg(chan2dev(&atchan->chan_common),
+ "scanned %u descriptors on freelist\n", i);
+
+ /* no more descriptor available in initial pool: create one more */
+ if (!ret) {
+ ret = atc_alloc_descriptor(&atchan->chan_common, GFP_ATOMIC);
+ if (ret) {
+ spin_lock_bh(&atchan->lock);
+ atchan->descs_allocated++;
+ spin_unlock_bh(&atchan->lock);
+ } else {
+ dev_err(chan2dev(&atchan->chan_common),
+ "not enough descriptors available\n");
+ }
+ }
+
+ return ret;
+}
+
+/**
+ * atc_desc_put - move a descriptor, including any children, to the free list
+ * @atchan: channel we work on
+ * @desc: descriptor, at the head of a chain, to move to free list
+ */
+static void atc_desc_put(struct at_dma_chan *atchan, struct at_desc *desc)
+{
+ if (desc) {
+ struct at_desc *child;
+
+ spin_lock_bh(&atchan->lock);
+ list_for_each_entry(child, &desc->txd.tx_list, desc_node)
+ dev_vdbg(chan2dev(&atchan->chan_common),
+ "moving child desc %p to freelist\n",
+ child);
+ list_splice_init(&desc->txd.tx_list, &atchan->free_list);
+ dev_vdbg(chan2dev(&atchan->chan_common),
+ "moving desc %p to freelist\n", desc);
+ list_add(&desc->desc_node, &atchan->free_list);
+ spin_unlock_bh(&atchan->lock);
+ }
+}
+
+/**
+ * atc_assign_cookie - compute and assign new cookie
+ * @atchan: channel we work on
+ * @desc: descriptor to asign cookie for
+ *
+ * Called with atchan->lock held and bh disabled
+ */
+static dma_cookie_t
+atc_assign_cookie(struct at_dma_chan *atchan, struct at_desc *desc)
+{
+ dma_cookie_t cookie = atchan->chan_common.cookie;
+
+ if (++cookie < 0)
+ cookie = 1;
+
+ atchan->chan_common.cookie = cookie;
+ desc->txd.cookie = cookie;
+
+ return cookie;
+}
+
+/**
+ * atc_dostart - starts the DMA engine for real
+ * @atchan: the channel we want to start
+ * @first: first descriptor in the list we want to begin with
+ *
+ * Called with atchan->lock held and bh disabled
+ */
+static void atc_dostart(struct at_dma_chan *atchan, struct at_desc *first)
+{
+ struct at_dma *atdma = to_at_dma(atchan->chan_common.device);
+
+ /* ASSERT: channel is idle */
+ if (atc_chan_is_enabled(atchan)) {
+ dev_err(chan2dev(&atchan->chan_common),
+ "BUG: Attempted to start non-idle channel\n");
+ dev_err(chan2dev(&atchan->chan_common),
+ " channel: s0x%x d0x%x ctrl0x%x:0x%x l0x%x\n",
+ channel_readl(atchan, SADDR),
+ channel_readl(atchan, DADDR),
+ channel_readl(atchan, CTRLA),
+ channel_readl(atchan, CTRLB),
+ channel_readl(atchan, DSCR));
+
+ /* The tasklet will hopefully advance the queue... */
+ return;
+ }
+
+ vdbg_dump_regs(atchan);
+
+ /* clear any pending interrupt */
+ while (dma_readl(atdma, EBCISR))
+ cpu_relax();
+
+ channel_writel(atchan, SADDR, 0);
+ channel_writel(atchan, DADDR, 0);
+ channel_writel(atchan, CTRLA, 0);
+ channel_writel(atchan, CTRLB, 0);
+ channel_writel(atchan, DSCR, first->txd.phys);
+ dma_writel(atdma, CHER, atchan->mask);
+
+ vdbg_dump_regs(atchan);
+}
+
+/**
+ * atc_chain_complete - finish work for one transaction chain
+ * @atchan: channel we work on
+ * @desc: descriptor at the head of the chain we want do complete
+ *
+ * Called with atchan->lock held and bh disabled */
+static void
+atc_chain_complete(struct at_dma_chan *atchan, struct at_desc *desc)
+{
+ dma_async_tx_callback callback;
+ void *param;
+ struct dma_async_tx_descriptor *txd = &desc->txd;
+
+ dev_vdbg(chan2dev(&atchan->chan_common),
+ "descriptor %u complete\n", txd->cookie);
+
+ atchan->completed_cookie = txd->cookie;
+ callback = txd->callback;
+ param = txd->callback_param;
+
+ /* move children to free_list */
+ list_splice_init(&txd->tx_list, &atchan->free_list);
+ /* move myself to free_list */
+ list_move(&desc->desc_node, &atchan->free_list);
+
+ /* unmap dma addresses */
+ if (!(txd->flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
+ if (txd->flags & DMA_COMPL_DEST_UNMAP_SINGLE)
+ dma_unmap_single(chan2parent(&atchan->chan_common),
+ desc->lli.daddr,
+ desc->len, DMA_FROM_DEVICE);
+ else
+ dma_unmap_page(chan2parent(&atchan->chan_common),
+ desc->lli.daddr,
+ desc->len, DMA_FROM_DEVICE);
+ }
+ if (!(txd->flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
+ if (txd->flags & DMA_COMPL_SRC_UNMAP_SINGLE)
+ dma_unmap_single(chan2parent(&atchan->chan_common),
+ desc->lli.saddr,
+ desc->len, DMA_TO_DEVICE);
+ else
+ dma_unmap_page(chan2parent(&atchan->chan_common),
+ desc->lli.saddr,
+ desc->len, DMA_TO_DEVICE);
+ }
+
+ /*
+ * The API requires that no submissions are done from a
+ * callback, so we don't need to drop the lock here
+ */
+ if (callback)
+ callback(param);
+
+ dma_run_dependencies(txd);
+}
+
+/**
+ * atc_complete_all - finish work for all transactions
+ * @atchan: channel to complete transactions for
+ *
+ * Eventually submit queued descriptors if any
+ *
+ * Assume channel is idle while calling this function
+ * Called with atchan->lock held and bh disabled
+ */
+static void atc_complete_all(struct at_dma_chan *atchan)
+{
+ struct at_desc *desc, *_desc;
+ LIST_HEAD(list);
+
+ dev_vdbg(chan2dev(&atchan->chan_common), "complete all\n");
+
+ BUG_ON(atc_chan_is_enabled(atchan));
+
+ /*
+ * Submit queued descriptors ASAP, i.e. before we go through
+ * the completed ones.
+ */
+ if (!list_empty(&atchan->queue))
+ atc_dostart(atchan, atc_first_queued(atchan));
+ /* empty active_list now it is completed */
+ list_splice_init(&atchan->active_list, &list);
+ /* empty queue list by moving descriptors (if any) to active_list */
+ list_splice_init(&atchan->queue, &atchan->active_list);
+
+ list_for_each_entry_safe(desc, _desc, &list, desc_node)
+ atc_chain_complete(atchan, desc);
+}
+
+/**
+ * atc_cleanup_descriptors - cleanup up finished descriptors in active_list
+ * @atchan: channel to be cleaned up
+ *
+ * Called with atchan->lock held and bh disabled
+ */
+static void atc_cleanup_descriptors(struct at_dma_chan *atchan)
+{
+ struct at_desc *desc, *_desc;
+ struct at_desc *child;
+
+ dev_vdbg(chan2dev(&atchan->chan_common), "cleanup descriptors\n");
+
+ list_for_each_entry_safe(desc, _desc, &atchan->active_list, desc_node) {
+ if (!(desc->lli.ctrla & ATC_DONE))
+ /* This one is currently in progress */
+ return;
+
+ list_for_each_entry(child, &desc->txd.tx_list, desc_node)
+ if (!(child->lli.ctrla & ATC_DONE))
+ /* Currently in progress */
+ return;
+
+ /*
+ * No descriptors so far seem to be in progress, i.e.
+ * this chain must be done.
+ */
+ atc_chain_complete(atchan, desc);
+ }
+}
+
+/**
+ * atc_advance_work - at the end of a transaction, move forward
+ * @atchan: channel where the transaction ended
+ *
+ * Called with atchan->lock held and bh disabled
+ */
+static void atc_advance_work(struct at_dma_chan *atchan)
+{
+ dev_vdbg(chan2dev(&atchan->chan_common), "advance_work\n");
+
+ if (list_empty(&atchan->active_list) ||
+ list_is_singular(&atchan->active_list)) {
+ atc_complete_all(atchan);
+ } else {
+ atc_chain_complete(atchan, atc_first_active(atchan));
+ /* advance work */
+ atc_dostart(atchan, atc_first_active(atchan));
+ }
+}
+
+
+/**
+ * atc_handle_error - handle errors reported by DMA controller
+ * @atchan: channel where error occurs
+ *
+ * Called with atchan->lock held and bh disabled
+ */
+static void atc_handle_error(struct at_dma_chan *atchan)
+{
+ struct at_desc *bad_desc;
+ struct at_desc *child;
+
+ /*
+ * The descriptor currently at the head of the active list is
+ * broked. Since we don't have any way to report errors, we'll
+ * just have to scream loudly and try to carry on.
+ */
+ bad_desc = atc_first_active(atchan);
+ list_del_init(&bad_desc->desc_node);
+
+ /* As we are stopped, take advantage to push queued descriptors
+ * in active_list */
+ list_splice_init(&atchan->queue, atchan->active_list.prev);
+
+ /* Try to restart the controller */
+ if (!list_empty(&atchan->active_list))
+ atc_dostart(atchan, atc_first_active(atchan));
+
+ /*
+ * KERN_CRITICAL may seem harsh, but since this only happens
+ * when someone submits a bad physical address in a
+ * descriptor, we should consider ourselves lucky that the
+ * controller flagged an error instead of scribbling over
+ * random memory locations.
+ */
+ dev_crit(chan2dev(&atchan->chan_common),
+ "Bad descriptor submitted for DMA!\n");
+ dev_crit(chan2dev(&atchan->chan_common),
+ " cookie: %d\n", bad_desc->txd.cookie);
+ atc_dump_lli(atchan, &bad_desc->lli);
+ list_for_each_entry(child, &bad_desc->txd.tx_list, desc_node)
+ atc_dump_lli(atchan, &child->lli);
+
+ /* Pretend the descriptor completed successfully */
+ atc_chain_complete(atchan, bad_desc);
+}
+
+
+/*-- IRQ & Tasklet ---------------------------------------------------*/
+
+static void atc_tasklet(unsigned long data)
+{
+ struct at_dma_chan *atchan = (struct at_dma_chan *)data;
+
+ /* Channel cannot be enabled here */
+ if (atc_chan_is_enabled(atchan)) {
+ dev_err(chan2dev(&atchan->chan_common),
+ "BUG: channel enabled in tasklet\n");
+ return;
+ }
+
+ spin_lock(&atchan->lock);
+ if (test_and_clear_bit(0, &atchan->error_status))
+ atc_handle_error(atchan);
+ else
+ atc_advance_work(atchan);
+
+ spin_unlock(&atchan->lock);
+}
+
+static irqreturn_t at_dma_interrupt(int irq, void *dev_id)
+{
+ struct at_dma *atdma = (struct at_dma *)dev_id;
+ struct at_dma_chan *atchan;
+ int i;
+ u32 status, pending, imr;
+ int ret = IRQ_NONE;
+
+ do {
+ imr = dma_readl(atdma, EBCIMR);
+ status = dma_readl(atdma, EBCISR);
+ pending = status & imr;
+
+ if (!pending)
+ break;
+
+ dev_vdbg(atdma->dma_common.dev,
+ "interrupt: status = 0x%08x, 0x%08x, 0x%08x\n",
+ status, imr, pending);
+
+ for (i = 0; i < atdma->dma_common.chancnt; i++) {
+ atchan = &atdma->chan[i];
+ if (pending & (AT_DMA_CBTC(i) | AT_DMA_ERR(i))) {
+ if (pending & AT_DMA_ERR(i)) {
+ /* Disable channel on AHB error */
+ dma_writel(atdma, CHDR, atchan->mask);
+ /* Give information to tasklet */
+ set_bit(0, &atchan->error_status);
+ }
+ tasklet_schedule(&atchan->tasklet);
+ ret = IRQ_HANDLED;
+ }
+ }
+
+ } while (pending);
+
+ return ret;
+}
+
+
+/*-- DMA Engine API --------------------------------------------------*/
+
+/**
+ * atc_tx_submit - set the prepared descriptor(s) to be executed by the engine
+ * @desc: descriptor at the head of the transaction chain
+ *
+ * Queue chain if DMA engine is working already
+ *
+ * Cookie increment and adding to active_list or queue must be atomic
+ */
+static dma_cookie_t atc_tx_submit(struct dma_async_tx_descriptor *tx)
+{
+ struct at_desc *desc = txd_to_at_desc(tx);
+ struct at_dma_chan *atchan = to_at_dma_chan(tx->chan);
+ dma_cookie_t cookie;
+
+ spin_lock_bh(&atchan->lock);
+ cookie = atc_assign_cookie(atchan, desc);
+
+ if (list_empty(&atchan->active_list)) {
+ dev_vdbg(chan2dev(tx->chan), "tx_submit: started %u\n",
+ desc->txd.cookie);
+ atc_dostart(atchan, desc);
+ list_add_tail(&desc->desc_node, &atchan->active_list);
+ } else {
+ dev_vdbg(chan2dev(tx->chan), "tx_submit: queued %u\n",
+ desc->txd.cookie);
+ list_add_tail(&desc->desc_node, &atchan->queue);
+ }
+
+ spin_unlock_bh(&atchan->lock);
+
+ return cookie;
+}
+
+/**
+ * atc_prep_dma_memcpy - prepare a memcpy operation
+ * @chan: the channel to prepare operation on
+ * @dest: operation virtual destination address
+ * @src: operation virtual source address
+ * @len: operation length
+ * @flags: tx descriptor status flags
+ */
+static struct dma_async_tx_descriptor *
+atc_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
+ size_t len, unsigned long flags)
+{
+ struct at_dma_chan *atchan = to_at_dma_chan(chan);
+ struct at_desc *desc = NULL;
+ struct at_desc *first = NULL;
+ struct at_desc *prev = NULL;
+ size_t xfer_count;
+ size_t offset;
+ unsigned int src_width;
+ unsigned int dst_width;
+ u32 ctrla;
+ u32 ctrlb;
+
+ dev_vdbg(chan2dev(chan), "prep_dma_memcpy: d0x%x s0x%x l0x%zx f0x%lx\n",
+ dest, src, len, flags);
+
+ if (unlikely(!len)) {
+ dev_dbg(chan2dev(chan), "prep_dma_memcpy: length is zero!\n");
+ return NULL;
+ }
+
+ ctrla = ATC_DEFAULT_CTRLA;
+ ctrlb = ATC_DEFAULT_CTRLB
+ | ATC_SRC_ADDR_MODE_INCR
+ | ATC_DST_ADDR_MODE_INCR
+ | ATC_FC_MEM2MEM;
+
+ /*
+ * We can be a lot more clever here, but this should take care
+ * of the most common optimization.
+ */
+ if (!((src | dest | len) & 3)) {
+ ctrla |= ATC_SRC_WIDTH_WORD | ATC_DST_WIDTH_WORD;
+ src_width = dst_width = 2;
+ } else if (!((src | dest | len) & 1)) {
+ ctrla |= ATC_SRC_WIDTH_HALFWORD | ATC_DST_WIDTH_HALFWORD;
+ src_width = dst_width = 1;
+ } else {
+ ctrla |= ATC_SRC_WIDTH_BYTE | ATC_DST_WIDTH_BYTE;
+ src_width = dst_width = 0;
+ }
+
+ for (offset = 0; offset < len; offset += xfer_count << src_width) {
+ xfer_count = min_t(size_t, (len - offset) >> src_width,
+ ATC_BTSIZE_MAX);
+
+ desc = atc_desc_get(atchan);
+ if (!desc)
+ goto err_desc_get;
+
+ desc->lli.saddr = src + offset;
+ desc->lli.daddr = dest + offset;
+ desc->lli.ctrla = ctrla | xfer_count;
+ desc->lli.ctrlb = ctrlb;
+
+ desc->txd.cookie = 0;
+ async_tx_ack(&desc->txd);
+
+ if (!first) {
+ first = desc;
+ } else {
+ /* inform the HW lli about chaining */
+ prev->lli.dscr = desc->txd.phys;
+ /* insert the link descriptor to the LD ring */
+ list_add_tail(&desc->desc_node,
+ &first->txd.tx_list);
+ }
+ prev = desc;
+ }
+
+ /* First descriptor of the chain embedds additional information */
+ first->txd.cookie = -EBUSY;
+ first->len = len;
+
+ /* set end-of-link to the last link descriptor of list*/
+ set_desc_eol(desc);
+
+ desc->txd.flags = flags; /* client is in control of this ack */
+
+ return &first->txd;
+
+err_desc_get:
+ atc_desc_put(atchan, first);
+ return NULL;
+}
+
+
+/**
+ * atc_prep_slave_sg - prepare descriptors for a DMA_SLAVE transaction
+ * @chan: DMA channel
+ * @sgl: scatterlist to transfer to/from
+ * @sg_len: number of entries in @scatterlist
+ * @direction: DMA direction
+ * @flags: tx descriptor status flags
+ */
+static struct dma_async_tx_descriptor *
+atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
+ unsigned int sg_len, enum dma_data_direction direction,
+ unsigned long flags)
+{
+ struct at_dma_chan *atchan = to_at_dma_chan(chan);
+ struct at_dma_slave *atslave = chan->private;
+ struct at_desc *first = NULL;
+ struct at_desc *prev = NULL;
+ u32 ctrla;
+ u32 ctrlb;
+ dma_addr_t reg;
+ unsigned int reg_width;
+ unsigned int mem_width;
+ unsigned int i;
+ struct scatterlist *sg;
+ size_t total_len = 0;
+
+ dev_vdbg(chan2dev(chan), "prep_slave_sg: %s f0x%lx\n",
+ direction == DMA_TO_DEVICE ? "TO DEVICE" : "FROM DEVICE",
+ flags);
+
+ if (unlikely(!atslave || !sg_len)) {
+ dev_dbg(chan2dev(chan), "prep_dma_memcpy: length is zero!\n");
+ return NULL;
+ }
+
+ reg_width = atslave->reg_width;
+
+ sg_len = dma_map_sg(chan2parent(chan), sgl, sg_len, direction);
+
+ ctrla = ATC_DEFAULT_CTRLA | atslave->ctrla;
+ ctrlb = ATC_DEFAULT_CTRLB | ATC_IEN;
+
+ switch (direction) {
+ case DMA_TO_DEVICE:
+ ctrla |= ATC_DST_WIDTH(reg_width);
+ ctrlb |= ATC_DST_ADDR_MODE_FIXED
+ | ATC_SRC_ADDR_MODE_INCR
+ | ATC_FC_MEM2PER;
+ reg = atslave->tx_reg;
+ for_each_sg(sgl, sg, sg_len, i) {
+ struct at_desc *desc;
+ u32 len;
+ u32 mem;
+
+ desc = atc_desc_get(atchan);
+ if (!desc)
+ goto err_desc_get;
+
+ mem = sg_phys(sg);
+ len = sg_dma_len(sg);
+ mem_width = 2;
+ if (unlikely(mem & 3 || len & 3))
+ mem_width = 0;
+
+ desc->lli.saddr = mem;
+ desc->lli.daddr = reg;
+ desc->lli.ctrla = ctrla
+ | ATC_SRC_WIDTH(mem_width)
+ | len >> mem_width;
+ desc->lli.ctrlb = ctrlb;
+
+ if (!first) {
+ first = desc;
+ } else {
+ /* inform the HW lli about chaining */
+ prev->lli.dscr = desc->txd.phys;
+ /* insert the link descriptor to the LD ring */
+ list_add_tail(&desc->desc_node,
+ &first->txd.tx_list);
+ }
+ prev = desc;
+ total_len += len;
+ }
+ break;
+ case DMA_FROM_DEVICE:
+ ctrla |= ATC_SRC_WIDTH(reg_width);
+ ctrlb |= ATC_DST_ADDR_MODE_INCR
+ | ATC_SRC_ADDR_MODE_FIXED
+ | ATC_FC_PER2MEM;
+
+ reg = atslave->rx_reg;
+ for_each_sg(sgl, sg, sg_len, i) {
+ struct at_desc *desc;
+ u32 len;
+ u32 mem;
+
+ desc = atc_desc_get(atchan);
+ if (!desc)
+ goto err_desc_get;
+
+ mem = sg_phys(sg);
+ len = sg_dma_len(sg);
+ mem_width = 2;
+ if (unlikely(mem & 3 || len & 3))
+ mem_width = 0;
+
+ desc->lli.saddr = reg;
+ desc->lli.daddr = mem;
+ desc->lli.ctrla = ctrla
+ | ATC_DST_WIDTH(mem_width)
+ | len >> mem_width;
+ desc->lli.ctrlb = ctrlb;
+
+ if (!first) {
+ first = desc;
+ } else {
+ /* inform the HW lli about chaining */
+ prev->lli.dscr = desc->txd.phys;
+ /* insert the link descriptor to the LD ring */
+ list_add_tail(&desc->desc_node,
+ &first->txd.tx_list);
+ }
+ prev = desc;
+ total_len += len;
+ }
+ break;
+ default:
+ return NULL;
+ }
+
+ /* set end-of-link to the last link descriptor of list*/
+ set_desc_eol(prev);
+
+ /* First descriptor of the chain embedds additional information */
+ first->txd.cookie = -EBUSY;
+ first->len = total_len;
+
+ /* last link descriptor of list is responsible of flags */
+ prev->txd.flags = flags; /* client is in control of this ack */
+
+ return &first->txd;
+
+err_desc_get:
+ dev_err(chan2dev(chan), "not enough descriptors available\n");
+ atc_desc_put(atchan, first);
+ return NULL;
+}
+
+static void atc_terminate_all(struct dma_chan *chan)
+{
+ struct at_dma_chan *atchan = to_at_dma_chan(chan);
+ struct at_dma *atdma = to_at_dma(chan->device);
+ struct at_desc *desc, *_desc;
+ LIST_HEAD(list);
+
+ /*
+ * This is only called when something went wrong elsewhere, so
+ * we don't really care about the data. Just disable the
+ * channel. We still have to poll the channel enable bit due
+ * to AHB/HSB limitations.
+ */
+ spin_lock_bh(&atchan->lock);
+
+ dma_writel(atdma, CHDR, atchan->mask);
+
+ /* confirm that this channel is disabled */
+ while (dma_readl(atdma, CHSR) & atchan->mask)
+ cpu_relax();
+
+ /* active_list entries will end up before queued entries */
+ list_splice_init(&atchan->queue, &list);
+ list_splice_init(&atchan->active_list, &list);
+
+ spin_unlock_bh(&atchan->lock);
+
+ /* Flush all pending and queued descriptors */
+ list_for_each_entry_safe(desc, _desc, &list, desc_node)
+ atc_chain_complete(atchan, desc);
+}
+
+/**
+ * atc_is_tx_complete - poll for transaction completion
+ * @chan: DMA channel
+ * @cookie: transaction identifier to check status of
+ * @done: if not %NULL, updated with last completed transaction
+ * @used: if not %NULL, updated with last used transaction
+ *
+ * If @done and @used are passed in, upon return they reflect the driver
+ * internal state and can be used with dma_async_is_complete() to check
+ * the status of multiple cookies without re-checking hardware state.
+ */
+static enum dma_status
+atc_is_tx_complete(struct dma_chan *chan,
+ dma_cookie_t cookie,
+ dma_cookie_t *done, dma_cookie_t *used)
+{
+ struct at_dma_chan *atchan = to_at_dma_chan(chan);
+ dma_cookie_t last_used;
+ dma_cookie_t last_complete;
+ enum dma_status ret;
+
+ dev_vdbg(chan2dev(chan), "is_tx_complete: %d (d%d, u%d)\n",
+ cookie, done ? *done : 0, used ? *used : 0);
+
+ spin_lock_bh(atchan->lock);
+
+ last_complete = atchan->completed_cookie;
+ last_used = chan->cookie;
+
+ ret = dma_async_is_complete(cookie, last_complete, last_used);
+ if (ret != DMA_SUCCESS) {
+ atc_cleanup_descriptors(atchan);
+
+ last_complete = atchan->completed_cookie;
+ last_used = chan->cookie;
+
+ ret = dma_async_is_complete(cookie, last_complete, last_used);
+ }
+
+ spin_unlock_bh(atchan->lock);
+
+ if (done)
+ *done = last_complete;
+ if (used)
+ *used = last_used;
+
+ return ret;
+}
+
+/**
+ * atc_issue_pending - try to finish work
+ * @chan: target DMA channel
+ */
+static void atc_issue_pending(struct dma_chan *chan)
+{
+ struct at_dma_chan *atchan = to_at_dma_chan(chan);
+
+ dev_vdbg(chan2dev(chan), "issue_pending\n");
+
+ if (!atc_chan_is_enabled(atchan)) {
+ spin_lock_bh(&atchan->lock);
+ atc_advance_work(atchan);
+ spin_unlock_bh(&atchan->lock);
+ }
+}
+
+/**
+ * atc_alloc_chan_resources - allocate resources for DMA channel
+ * @chan: allocate descriptor resources for this channel
+ * @client: current client requesting the channel be ready for requests
+ *
+ * return - the number of allocated descriptors
+ */
+static int atc_alloc_chan_resources(struct dma_chan *chan)
+{
+ struct at_dma_chan *atchan = to_at_dma_chan(chan);
+ struct at_dma *atdma = to_at_dma(chan->device);
+ struct at_desc *desc;
+ struct at_dma_slave *atslave;
+ int i;
+ u32 cfg;
+ LIST_HEAD(tmp_list);
+
+ dev_vdbg(chan2dev(chan), "alloc_chan_resources\n");
+
+ /* ASSERT: channel is idle */
+ if (atc_chan_is_enabled(atchan)) {
+ dev_dbg(chan2dev(chan), "DMA channel not idle ?\n");
+ return -EIO;
+ }
+
+ cfg = ATC_DEFAULT_CFG;
+
+ atslave = chan->private;
+ if (atslave) {
+ /*
+ * We need controller-specific data to set up slave
+ * transfers.
+ */
+ BUG_ON(!atslave->dma_dev || atslave->dma_dev != atdma->dma_common.dev);
+
+ /* if cfg configuration specified take it instad of default */
+ if (atslave->cfg)
+ cfg = atslave->cfg;
+ }
+
+ /* have we already been set up?
+ * reconfigure channel but no need to reallocate descriptors */
+ if (!list_empty(&atchan->free_list))
+ return atchan->descs_allocated;
+
+ /* Allocate initial pool of descriptors */
+ for (i = 0; i < init_nr_desc_per_channel; i++) {
+ desc = atc_alloc_descriptor(chan, GFP_KERNEL);
+ if (!desc) {
+ dev_err(atdma->dma_common.dev,
+ "Only %d initial descriptors\n", i);
+ break;
+ }
+ list_add_tail(&desc->desc_node, &tmp_list);
+ }
+
+ spin_lock_bh(&atchan->lock);
+ atchan->descs_allocated = i;
+ list_splice(&tmp_list, &atchan->free_list);
+ atchan->completed_cookie = chan->cookie = 1;
+ spin_unlock_bh(&atchan->lock);
+
+ /* channel parameters */
+ channel_writel(atchan, CFG, cfg);
+
+ dev_dbg(chan2dev(chan),
+ "alloc_chan_resources: allocated %d descriptors\n",
+ atchan->descs_allocated);
+
+ return atchan->descs_allocated;
+}
+
+/**
+ * atc_free_chan_resources - free all channel resources
+ * @chan: DMA channel
+ */
+static void atc_free_chan_resources(struct dma_chan *chan)
+{
+ struct at_dma_chan *atchan = to_at_dma_chan(chan);
+ struct at_dma *atdma = to_at_dma(chan->device);
+ struct at_desc *desc, *_desc;
+ LIST_HEAD(list);
+
+ dev_dbg(chan2dev(chan), "free_chan_resources: (descs allocated=%u)\n",
+ atchan->descs_allocated);
+
+ /* ASSERT: channel is idle */
+ BUG_ON(!list_empty(&atchan->active_list));
+ BUG_ON(!list_empty(&atchan->queue));
+ BUG_ON(atc_chan_is_enabled(atchan));
+
+ list_for_each_entry_safe(desc, _desc, &atchan->free_list, desc_node) {
+ dev_vdbg(chan2dev(chan), " freeing descriptor %p\n", desc);
+ list_del(&desc->desc_node);
+ /* free link descriptor */
+ dma_pool_free(atdma->dma_desc_pool, desc, desc->txd.phys);
+ }
+ list_splice_init(&atchan->free_list, &list);
+ atchan->descs_allocated = 0;
+
+ dev_vdbg(chan2dev(chan), "free_chan_resources: done\n");
+}
+
+
+/*-- Module Management -----------------------------------------------*/
+
+/**
+ * at_dma_off - disable DMA controller
+ * @atdma: the Atmel HDAMC device
+ */
+static void at_dma_off(struct at_dma *atdma)
+{
+ dma_writel(atdma, EN, 0);
+
+ /* disable all interrupts */
+ dma_writel(atdma, EBCIDR, -1L);
+
+ /* confirm that all channels are disabled */
+ while (dma_readl(atdma, CHSR) & atdma->all_chan_mask)
+ cpu_relax();
+}
+
+static int __init at_dma_probe(struct platform_device *pdev)
+{
+ struct at_dma_platform_data *pdata;
+ struct resource *io;
+ struct at_dma *atdma;
+ size_t size;
+ int irq;
+ int err;
+ int i;
+
+ /* get DMA Controller parameters from platform */
+ pdata = pdev->dev.platform_data;
+ if (!pdata || pdata->nr_channels > AT_DMA_MAX_NR_CHANNELS)
+ return -EINVAL;
+
+ io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!io)
+ return -EINVAL;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ size = sizeof(struct at_dma);
+ size += pdata->nr_channels * sizeof(struct at_dma_chan);
+ atdma = kzalloc(size, GFP_KERNEL);
+ if (!atdma)
+ return -ENOMEM;
+
+ /* discover transaction capabilites from the platform data */
+ atdma->dma_common.cap_mask = pdata->cap_mask;
+ atdma->all_chan_mask = (1 << pdata->nr_channels) - 1;
+
+ size = io->end - io->start + 1;
+ if (!request_mem_region(io->start, size, pdev->dev.driver->name)) {
+ err = -EBUSY;
+ goto err_kfree;
+ }
+
+ atdma->regs = ioremap(io->start, size);
+ if (!atdma->regs) {
+ err = -ENOMEM;
+ goto err_release_r;
+ }
+
+ atdma->clk = clk_get(&pdev->dev, "dma_clk");
+ if (IS_ERR(atdma->clk)) {
+ err = PTR_ERR(atdma->clk);
+ goto err_clk;
+ }
+ clk_enable(atdma->clk);
+
+ /* force dma off, just in case */
+ at_dma_off(atdma);
+
+ err = request_irq(irq, at_dma_interrupt, 0, "at_hdmac", atdma);
+ if (err)
+ goto err_irq;
+
+ platform_set_drvdata(pdev, atdma);
+
+ /* create a pool of consistent memory blocks for hardware descriptors */
+ atdma->dma_desc_pool = dma_pool_create("at_hdmac_desc_pool",
+ &pdev->dev, sizeof(struct at_desc),
+ 4 /* word alignment */, 0);
+ if (!atdma->dma_desc_pool) {
+ dev_err(&pdev->dev, "No memory for descriptors dma pool\n");
+ err = -ENOMEM;
+ goto err_pool_create;
+ }
+
+ /* clear any pending interrupt */
+ while (dma_readl(atdma, EBCISR))
+ cpu_relax();
+
+ /* initialize channels related values */
+ INIT_LIST_HEAD(&atdma->dma_common.channels);
+ for (i = 0; i < pdata->nr_channels; i++, atdma->dma_common.chancnt++) {
+ struct at_dma_chan *atchan = &atdma->chan[i];
+
+ atchan->chan_common.device = &atdma->dma_common;
+ atchan->chan_common.cookie = atchan->completed_cookie = 1;
+ atchan->chan_common.chan_id = i;
+ list_add_tail(&atchan->chan_common.device_node,
+ &atdma->dma_common.channels);
+
+ atchan->ch_regs = atdma->regs + ch_regs(i);
+ spin_lock_init(&atchan->lock);
+ atchan->mask = 1 << i;
+
+ INIT_LIST_HEAD(&atchan->active_list);
+ INIT_LIST_HEAD(&atchan->queue);
+ INIT_LIST_HEAD(&atchan->free_list);
+
+ tasklet_init(&atchan->tasklet, atc_tasklet,
+ (unsigned long)atchan);
+ atc_enable_irq(atchan);
+ }
+
+ /* set base routines */
+ atdma->dma_common.device_alloc_chan_resources = atc_alloc_chan_resources;
+ atdma->dma_common.device_free_chan_resources = atc_free_chan_resources;
+ atdma->dma_common.device_is_tx_complete = atc_is_tx_complete;
+ atdma->dma_common.device_issue_pending = atc_issue_pending;
+ atdma->dma_common.dev = &pdev->dev;
+
+ /* set prep routines based on capability */
+ if (dma_has_cap(DMA_MEMCPY, atdma->dma_common.cap_mask))
+ atdma->dma_common.device_prep_dma_memcpy = atc_prep_dma_memcpy;
+
+ if (dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask)) {
+ atdma->dma_common.device_prep_slave_sg = atc_prep_slave_sg;
+ atdma->dma_common.device_terminate_all = atc_terminate_all;
+ }
+
+ dma_writel(atdma, EN, AT_DMA_ENABLE);
+
+ dev_info(&pdev->dev, "Atmel AHB DMA Controller ( %s%s), %d channels\n",
+ dma_has_cap(DMA_MEMCPY, atdma->dma_common.cap_mask) ? "cpy " : "",
+ dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask) ? "slave " : "",
+ atdma->dma_common.chancnt);
+
+ dma_async_device_register(&atdma->dma_common);
+
+ return 0;
+
+err_pool_create:
+ platform_set_drvdata(pdev, NULL);
+ free_irq(platform_get_irq(pdev, 0), atdma);
+err_irq:
+ clk_disable(atdma->clk);
+ clk_put(atdma->clk);
+err_clk:
+ iounmap(atdma->regs);
+ atdma->regs = NULL;
+err_release_r:
+ release_mem_region(io->start, size);
+err_kfree:
+ kfree(atdma);
+ return err;
+}
+
+static int __exit at_dma_remove(struct platform_device *pdev)
+{
+ struct at_dma *atdma = platform_get_drvdata(pdev);
+ struct dma_chan *chan, *_chan;
+ struct resource *io;
+
+ at_dma_off(atdma);
+ dma_async_device_unregister(&atdma->dma_common);
+
+ dma_pool_destroy(atdma->dma_desc_pool);
+ platform_set_drvdata(pdev, NULL);
+ free_irq(platform_get_irq(pdev, 0), atdma);
+
+ list_for_each_entry_safe(chan, _chan, &atdma->dma_common.channels,
+ device_node) {
+ struct at_dma_chan *atchan = to_at_dma_chan(chan);
+
+ /* Disable interrupts */
+ atc_disable_irq(atchan);
+ tasklet_disable(&atchan->tasklet);
+
+ tasklet_kill(&atchan->tasklet);
+ list_del(&chan->device_node);
+ }
+
+ clk_disable(atdma->clk);
+ clk_put(atdma->clk);
+
+ iounmap(atdma->regs);
+ atdma->regs = NULL;
+
+ io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(io->start, io->end - io->start + 1);
+
+ kfree(atdma);
+
+ return 0;
+}
+
+static void at_dma_shutdown(struct platform_device *pdev)
+{
+ struct at_dma *atdma = platform_get_drvdata(pdev);
+
+ at_dma_off(platform_get_drvdata(pdev));
+ clk_disable(atdma->clk);
+}
+
+static int at_dma_suspend_late(struct platform_device *pdev, pm_message_t mesg)
+{
+ struct at_dma *atdma = platform_get_drvdata(pdev);
+
+ at_dma_off(platform_get_drvdata(pdev));
+ clk_disable(atdma->clk);
+ return 0;
+}
+
+static int at_dma_resume_early(struct platform_device *pdev)
+{
+ struct at_dma *atdma = platform_get_drvdata(pdev);
+
+ clk_enable(atdma->clk);
+ dma_writel(atdma, EN, AT_DMA_ENABLE);
+ return 0;
+
+}
+
+static struct platform_driver at_dma_driver = {
+ .remove = __exit_p(at_dma_remove),
+ .shutdown = at_dma_shutdown,
+ .suspend_late = at_dma_suspend_late,
+ .resume_early = at_dma_resume_early,
+ .driver = {
+ .name = "at_hdmac",
+ },
+};
+
+static int __init at_dma_init(void)
+{
+ return platform_driver_probe(&at_dma_driver, at_dma_probe);
+}
+module_init(at_dma_init);
+
+static void __exit at_dma_exit(void)
+{
+ platform_driver_unregister(&at_dma_driver);
+}
+module_exit(at_dma_exit);
+
+MODULE_DESCRIPTION("Atmel AHB DMA Controller driver");
+MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@atmel.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:at_hdmac");
--- /dev/null
+/*
+ * Header file for the Atmel AHB DMA Controller driver
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef AT_HDMAC_REGS_H
+#define AT_HDMAC_REGS_H
+
+#include <mach/at_hdmac.h>
+
+#define AT_DMA_MAX_NR_CHANNELS 8
+
+
+#define AT_DMA_GCFG 0x00 /* Global Configuration Register */
+#define AT_DMA_IF_BIGEND(i) (0x1 << (i)) /* AHB-Lite Interface i in Big-endian mode */
+#define AT_DMA_ARB_CFG (0x1 << 4) /* Arbiter mode. */
+#define AT_DMA_ARB_CFG_FIXED (0x0 << 4)
+#define AT_DMA_ARB_CFG_ROUND_ROBIN (0x1 << 4)
+
+#define AT_DMA_EN 0x04 /* Controller Enable Register */
+#define AT_DMA_ENABLE (0x1 << 0)
+
+#define AT_DMA_SREQ 0x08 /* Software Single Request Register */
+#define AT_DMA_SSREQ(x) (0x1 << ((x) << 1)) /* Request a source single transfer on channel x */
+#define AT_DMA_DSREQ(x) (0x1 << (1 + ((x) << 1))) /* Request a destination single transfer on channel x */
+
+#define AT_DMA_CREQ 0x0C /* Software Chunk Transfer Request Register */
+#define AT_DMA_SCREQ(x) (0x1 << ((x) << 1)) /* Request a source chunk transfer on channel x */
+#define AT_DMA_DCREQ(x) (0x1 << (1 + ((x) << 1))) /* Request a destination chunk transfer on channel x */
+
+#define AT_DMA_LAST 0x10 /* Software Last Transfer Flag Register */
+#define AT_DMA_SLAST(x) (0x1 << ((x) << 1)) /* This src rq is last tx of buffer on channel x */
+#define AT_DMA_DLAST(x) (0x1 << (1 + ((x) << 1))) /* This dst rq is last tx of buffer on channel x */
+
+#define AT_DMA_SYNC 0x14 /* Request Synchronization Register */
+#define AT_DMA_SYR(h) (0x1 << (h)) /* Synchronize handshake line h */
+
+/* Error, Chained Buffer transfer completed and Buffer transfer completed Interrupt registers */
+#define AT_DMA_EBCIER 0x18 /* Enable register */
+#define AT_DMA_EBCIDR 0x1C /* Disable register */
+#define AT_DMA_EBCIMR 0x20 /* Mask Register */
+#define AT_DMA_EBCISR 0x24 /* Status Register */
+#define AT_DMA_CBTC_OFFSET 8
+#define AT_DMA_ERR_OFFSET 16
+#define AT_DMA_BTC(x) (0x1 << (x))
+#define AT_DMA_CBTC(x) (0x1 << (AT_DMA_CBTC_OFFSET + (x)))
+#define AT_DMA_ERR(x) (0x1 << (AT_DMA_ERR_OFFSET + (x)))
+
+#define AT_DMA_CHER 0x28 /* Channel Handler Enable Register */
+#define AT_DMA_ENA(x) (0x1 << (x))
+#define AT_DMA_SUSP(x) (0x1 << ( 8 + (x)))
+#define AT_DMA_KEEP(x) (0x1 << (24 + (x)))
+
+#define AT_DMA_CHDR 0x2C /* Channel Handler Disable Register */
+#define AT_DMA_DIS(x) (0x1 << (x))
+#define AT_DMA_RES(x) (0x1 << ( 8 + (x)))
+
+#define AT_DMA_CHSR 0x30 /* Channel Handler Status Register */
+#define AT_DMA_EMPT(x) (0x1 << (16 + (x)))
+#define AT_DMA_STAL(x) (0x1 << (24 + (x)))
+
+
+#define AT_DMA_CH_REGS_BASE 0x3C /* Channel registers base address */
+#define ch_regs(x) (AT_DMA_CH_REGS_BASE + (x) * 0x28) /* Channel x base addr */
+
+/* Hardware register offset for each channel */
+#define ATC_SADDR_OFFSET 0x00 /* Source Address Register */
+#define ATC_DADDR_OFFSET 0x04 /* Destination Address Register */
+#define ATC_DSCR_OFFSET 0x08 /* Descriptor Address Register */
+#define ATC_CTRLA_OFFSET 0x0C /* Control A Register */
+#define ATC_CTRLB_OFFSET 0x10 /* Control B Register */
+#define ATC_CFG_OFFSET 0x14 /* Configuration Register */
+#define ATC_SPIP_OFFSET 0x18 /* Src PIP Configuration Register */
+#define ATC_DPIP_OFFSET 0x1C /* Dst PIP Configuration Register */
+
+
+/* Bitfield definitions */
+
+/* Bitfields in DSCR */
+#define ATC_DSCR_IF(i) (0x3 & (i)) /* Dsc feched via AHB-Lite Interface i */
+
+/* Bitfields in CTRLA */
+#define ATC_BTSIZE_MAX 0xFFFFUL /* Maximum Buffer Transfer Size */
+#define ATC_BTSIZE(x) (ATC_BTSIZE_MAX & (x)) /* Buffer Transfer Size */
+/* Chunck Tranfer size definitions are in at_hdmac.h */
+#define ATC_SRC_WIDTH_MASK (0x3 << 24) /* Source Single Transfer Size */
+#define ATC_SRC_WIDTH(x) ((x) << 24)
+#define ATC_SRC_WIDTH_BYTE (0x0 << 24)
+#define ATC_SRC_WIDTH_HALFWORD (0x1 << 24)
+#define ATC_SRC_WIDTH_WORD (0x2 << 24)
+#define ATC_DST_WIDTH_MASK (0x3 << 28) /* Destination Single Transfer Size */
+#define ATC_DST_WIDTH(x) ((x) << 28)
+#define ATC_DST_WIDTH_BYTE (0x0 << 28)
+#define ATC_DST_WIDTH_HALFWORD (0x1 << 28)
+#define ATC_DST_WIDTH_WORD (0x2 << 28)
+#define ATC_DONE (0x1 << 31) /* Tx Done (only written back in descriptor) */
+
+/* Bitfields in CTRLB */
+#define ATC_SIF(i) (0x3 & (i)) /* Src tx done via AHB-Lite Interface i */
+#define ATC_DIF(i) ((0x3 & (i)) << 4) /* Dst tx done via AHB-Lite Interface i */
+#define ATC_SRC_PIP (0x1 << 8) /* Source Picture-in-Picture enabled */
+#define ATC_DST_PIP (0x1 << 12) /* Destination Picture-in-Picture enabled */
+#define ATC_SRC_DSCR_DIS (0x1 << 16) /* Src Descriptor fetch disable */
+#define ATC_DST_DSCR_DIS (0x1 << 20) /* Dst Descriptor fetch disable */
+#define ATC_FC_MASK (0x7 << 21) /* Choose Flow Controller */
+#define ATC_FC_MEM2MEM (0x0 << 21) /* Mem-to-Mem (DMA) */
+#define ATC_FC_MEM2PER (0x1 << 21) /* Mem-to-Periph (DMA) */
+#define ATC_FC_PER2MEM (0x2 << 21) /* Periph-to-Mem (DMA) */
+#define ATC_FC_PER2PER (0x3 << 21) /* Periph-to-Periph (DMA) */
+#define ATC_FC_PER2MEM_PER (0x4 << 21) /* Periph-to-Mem (Peripheral) */
+#define ATC_FC_MEM2PER_PER (0x5 << 21) /* Mem-to-Periph (Peripheral) */
+#define ATC_FC_PER2PER_SRCPER (0x6 << 21) /* Periph-to-Periph (Src Peripheral) */
+#define ATC_FC_PER2PER_DSTPER (0x7 << 21) /* Periph-to-Periph (Dst Peripheral) */
+#define ATC_SRC_ADDR_MODE_MASK (0x3 << 24)
+#define ATC_SRC_ADDR_MODE_INCR (0x0 << 24) /* Incrementing Mode */
+#define ATC_SRC_ADDR_MODE_DECR (0x1 << 24) /* Decrementing Mode */
+#define ATC_SRC_ADDR_MODE_FIXED (0x2 << 24) /* Fixed Mode */
+#define ATC_DST_ADDR_MODE_MASK (0x3 << 28)
+#define ATC_DST_ADDR_MODE_INCR (0x0 << 28) /* Incrementing Mode */
+#define ATC_DST_ADDR_MODE_DECR (0x1 << 28) /* Decrementing Mode */
+#define ATC_DST_ADDR_MODE_FIXED (0x2 << 28) /* Fixed Mode */
+#define ATC_IEN (0x1 << 30) /* BTC interrupt enable (active low) */
+#define ATC_AUTO (0x1 << 31) /* Auto multiple buffer tx enable */
+
+/* Bitfields in CFG */
+/* are in at_hdmac.h */
+
+/* Bitfields in SPIP */
+#define ATC_SPIP_HOLE(x) (0xFFFFU & (x))
+#define ATC_SPIP_BOUNDARY(x) ((0x3FF & (x)) << 16)
+
+/* Bitfields in DPIP */
+#define ATC_DPIP_HOLE(x) (0xFFFFU & (x))
+#define ATC_DPIP_BOUNDARY(x) ((0x3FF & (x)) << 16)
+
+
+/*-- descriptors -----------------------------------------------------*/
+
+/* LLI == Linked List Item; aka DMA buffer descriptor */
+struct at_lli {
+ /* values that are not changed by hardware */
+ dma_addr_t saddr;
+ dma_addr_t daddr;
+ /* value that may get written back: */
+ u32 ctrla;
+ /* more values that are not changed by hardware */
+ u32 ctrlb;
+ dma_addr_t dscr; /* chain to next lli */
+};
+
+/**
+ * struct at_desc - software descriptor
+ * @at_lli: hardware lli structure
+ * @txd: support for the async_tx api
+ * @desc_node: node on the channed descriptors list
+ * @len: total transaction bytecount
+ */
+struct at_desc {
+ /* FIRST values the hardware uses */
+ struct at_lli lli;
+
+ /* THEN values for driver housekeeping */
+ struct dma_async_tx_descriptor txd;
+ struct list_head desc_node;
+ size_t len;
+};
+
+static inline struct at_desc *
+txd_to_at_desc(struct dma_async_tx_descriptor *txd)
+{
+ return container_of(txd, struct at_desc, txd);
+}
+
+
+/*-- Channels --------------------------------------------------------*/
+
+/**
+ * struct at_dma_chan - internal representation of an Atmel HDMAC channel
+ * @chan_common: common dmaengine channel object members
+ * @device: parent device
+ * @ch_regs: memory mapped register base
+ * @mask: channel index in a mask
+ * @error_status: transmit error status information from irq handler
+ * to tasklet (use atomic operations)
+ * @tasklet: bottom half to finish transaction work
+ * @lock: serializes enqueue/dequeue operations to descriptors lists
+ * @completed_cookie: identifier for the most recently completed operation
+ * @active_list: list of descriptors dmaengine is being running on
+ * @queue: list of descriptors ready to be submitted to engine
+ * @free_list: list of descriptors usable by the channel
+ * @descs_allocated: records the actual size of the descriptor pool
+ */
+struct at_dma_chan {
+ struct dma_chan chan_common;
+ struct at_dma *device;
+ void __iomem *ch_regs;
+ u8 mask;
+ unsigned long error_status;
+ struct tasklet_struct tasklet;
+
+ spinlock_t lock;
+
+ /* these other elements are all protected by lock */
+ dma_cookie_t completed_cookie;
+ struct list_head active_list;
+ struct list_head queue;
+ struct list_head free_list;
+ unsigned int descs_allocated;
+};
+
+#define channel_readl(atchan, name) \
+ __raw_readl((atchan)->ch_regs + ATC_##name##_OFFSET)
+
+#define channel_writel(atchan, name, val) \
+ __raw_writel((val), (atchan)->ch_regs + ATC_##name##_OFFSET)
+
+static inline struct at_dma_chan *to_at_dma_chan(struct dma_chan *dchan)
+{
+ return container_of(dchan, struct at_dma_chan, chan_common);
+}
+
+
+/*-- Controller ------------------------------------------------------*/
+
+/**
+ * struct at_dma - internal representation of an Atmel HDMA Controller
+ * @chan_common: common dmaengine dma_device object members
+ * @ch_regs: memory mapped register base
+ * @clk: dma controller clock
+ * @all_chan_mask: all channels availlable in a mask
+ * @dma_desc_pool: base of DMA descriptor region (DMA address)
+ * @chan: channels table to store at_dma_chan structures
+ */
+struct at_dma {
+ struct dma_device dma_common;
+ void __iomem *regs;
+ struct clk *clk;
+
+ u8 all_chan_mask;
+
+ struct dma_pool *dma_desc_pool;
+ /* AT THE END channels table */
+ struct at_dma_chan chan[0];
+};
+
+#define dma_readl(atdma, name) \
+ __raw_readl((atdma)->regs + AT_DMA_##name)
+#define dma_writel(atdma, name, val) \
+ __raw_writel((val), (atdma)->regs + AT_DMA_##name)
+
+static inline struct at_dma *to_at_dma(struct dma_device *ddev)
+{
+ return container_of(ddev, struct at_dma, dma_common);
+}
+
+
+/*-- Helper functions ------------------------------------------------*/
+
+static struct device *chan2dev(struct dma_chan *chan)
+{
+ return &chan->dev->device;
+}
+static struct device *chan2parent(struct dma_chan *chan)
+{
+ return chan->dev->device.parent;
+}
+
+#if defined(VERBOSE_DEBUG)
+static void vdbg_dump_regs(struct at_dma_chan *atchan)
+{
+ struct at_dma *atdma = to_at_dma(atchan->chan_common.device);
+
+ dev_err(chan2dev(&atchan->chan_common),
+ " channel %d : imr = 0x%x, chsr = 0x%x\n",
+ atchan->chan_common.chan_id,
+ dma_readl(atdma, EBCIMR),
+ dma_readl(atdma, CHSR));
+
+ dev_err(chan2dev(&atchan->chan_common),
+ " channel: s0x%x d0x%x ctrl0x%x:0x%x cfg0x%x l0x%x\n",
+ channel_readl(atchan, SADDR),
+ channel_readl(atchan, DADDR),
+ channel_readl(atchan, CTRLA),
+ channel_readl(atchan, CTRLB),
+ channel_readl(atchan, CFG),
+ channel_readl(atchan, DSCR));
+}
+#else
+static void vdbg_dump_regs(struct at_dma_chan *atchan) {}
+#endif
+
+static void atc_dump_lli(struct at_dma_chan *atchan, struct at_lli *lli)
+{
+ dev_printk(KERN_CRIT, chan2dev(&atchan->chan_common),
+ " desc: s0x%x d0x%x ctrl0x%x:0x%x l0x%x\n",
+ lli->saddr, lli->daddr,
+ lli->ctrla, lli->ctrlb, lli->dscr);
+}
+
+
+static void atc_setup_irq(struct at_dma_chan *atchan, int on)
+{
+ struct at_dma *atdma = to_at_dma(atchan->chan_common.device);
+ u32 ebci;
+
+ /* enable interrupts on buffer chain completion & error */
+ ebci = AT_DMA_CBTC(atchan->chan_common.chan_id)
+ | AT_DMA_ERR(atchan->chan_common.chan_id);
+ if (on)
+ dma_writel(atdma, EBCIER, ebci);
+ else
+ dma_writel(atdma, EBCIDR, ebci);
+}
+
+static inline void atc_enable_irq(struct at_dma_chan *atchan)
+{
+ atc_setup_irq(atchan, 1);
+}
+
+static inline void atc_disable_irq(struct at_dma_chan *atchan)
+{
+ atc_setup_irq(atchan, 0);
+}
+
+
+/**
+ * atc_chan_is_enabled - test if given channel is enabled
+ * @atchan: channel we want to test status
+ */
+static inline int atc_chan_is_enabled(struct at_dma_chan *atchan)
+{
+ struct at_dma *atdma = to_at_dma(atchan->chan_common.device);
+
+ return !!(dma_readl(atdma, CHSR) & atchan->mask);
+}
+
+
+/**
+ * set_desc_eol - set end-of-link to descriptor so it will end transfer
+ * @desc: descriptor, signle or at the end of a chain, to end chain on
+ */
+static void set_desc_eol(struct at_desc *desc)
+{
+ desc->lli.ctrlb |= ATC_SRC_DSCR_DIS | ATC_DST_DSCR_DIS;
+ desc->lli.dscr = 0;
+}
+
+#endif /* AT_HDMAC_REGS_H */
MODULE_PARM_DESC(max_channels,
"Maximum number of channels to use (default: all)");
+static unsigned int iterations;
+module_param(iterations, uint, S_IRUGO);
+MODULE_PARM_DESC(iterations,
+ "Iterations before stopping test (default: infinite)");
+
static unsigned int xor_sources = 3;
module_param(xor_sources, uint, S_IRUGO);
MODULE_PARM_DESC(xor_sources,
buf[i] = PATTERN_SRC | (~i & PATTERN_COUNT_MASK);
for ( ; i < start + len; i++)
buf[i] = PATTERN_SRC | PATTERN_COPY
- | (~i & PATTERN_COUNT_MASK);;
+ | (~i & PATTERN_COUNT_MASK);
for ( ; i < test_buf_size; i++)
buf[i] = PATTERN_SRC | (~i & PATTERN_COUNT_MASK);
buf++;
flags = DMA_CTRL_ACK | DMA_COMPL_SKIP_DEST_UNMAP | DMA_PREP_INTERRUPT;
- while (!kthread_should_stop()) {
+ while (!kthread_should_stop()
+ && !(iterations && total_tests >= iterations)) {
struct dma_device *dev = chan->device;
struct dma_async_tx_descriptor *tx = NULL;
dma_addr_t dma_srcs[src_cnt];
err_srcs:
pr_notice("%s: terminating after %u tests, %u failures (status %d)\n",
thread_name, total_tests, failed_tests, ret);
+
+ if (iterations > 0)
+ while (!kthread_should_stop()) {
+ DECLARE_WAIT_QUEUE_HEAD(wait_dmatest_exit);
+ interruptible_sleep_on(&wait_dmatest_exit);
+ }
+
return ret;
}
if (dma_has_cap(DMA_MEMCPY, dma_dev->cap_mask)) {
cnt = dmatest_add_threads(dtc, DMA_MEMCPY);
- thread_count += cnt > 0 ?: 0;
+ thread_count += cnt > 0 ? cnt : 0;
}
if (dma_has_cap(DMA_XOR, dma_dev->cap_mask)) {
cnt = dmatest_add_threads(dtc, DMA_XOR);
- thread_count += cnt > 0 ?: 0;
+ thread_count += cnt > 0 ? cnt : 0;
}
pr_info("dmatest: Started %u threads using %s\n",
* also fit for MPC8560, MPC8555, MPC8548, MPC8641, and etc.
* The support for MPC8349 DMA contorller is also added.
*
+ * This driver instructs the DMA controller to issue the PCI Read Multiple
+ * command for PCI read operations, instead of using the default PCI Read Line
+ * command. Please be aware that this setting may result in read pre-fetching
+ * on some platforms.
+ *
* This is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
case FSL_DMA_IP_83XX:
/* Set the channel to below modes:
* EOTIE - End-of-transfer interrupt enable
+ * PRC_RM - PCI read multiple
*/
- DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, FSL_DMA_MR_EOTIE,
- 32);
+ DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, FSL_DMA_MR_EOTIE
+ | FSL_DMA_MR_PRC_RM, 32);
break;
}
static void dma_start(struct fsl_dma_chan *fsl_chan)
{
- u32 mr_set = 0;;
+ u32 mr_set = 0;
if (fsl_chan->feature & FSL_DMA_CHAN_PAUSE_EXT) {
DMA_OUT(fsl_chan, &fsl_chan->reg_base->bcr, 0, 32);
mr_set |= FSL_DMA_MR_EMP_EN;
- } else
+ } else if ((fsl_chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_85XX) {
DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr,
DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32)
& ~FSL_DMA_MR_EMP_EN, 32);
+ }
if (fsl_chan->feature & FSL_DMA_CHAN_START_EXT)
mr_set |= FSL_DMA_MR_EMS_EN;
switch (new_fsl_chan->feature & FSL_DMA_IP_MASK) {
case FSL_DMA_IP_85XX:
- new_fsl_chan->toggle_ext_start = fsl_chan_toggle_ext_start;
new_fsl_chan->toggle_ext_pause = fsl_chan_toggle_ext_pause;
case FSL_DMA_IP_83XX:
+ new_fsl_chan->toggle_ext_start = fsl_chan_toggle_ext_start;
new_fsl_chan->set_src_loop_size = fsl_chan_set_src_loop_size;
new_fsl_chan->set_dest_loop_size = fsl_chan_set_dest_loop_size;
}
/* Special MR definition for MPC8349 */
#define FSL_DMA_MR_EOTIE 0x00000080
+#define FSL_DMA_MR_PRC_RM 0x00000800
#define FSL_DMA_SR_CH 0x00000020
#define FSL_DMA_SR_PE 0x00000010
if (dma_has_cap(DMA_MEMSET, dma_dev->cap_mask))
dma_dev->device_prep_dma_memset = mv_xor_prep_dma_memset;
if (dma_has_cap(DMA_XOR, dma_dev->cap_mask)) {
- dma_dev->max_xor = 8; ;
+ dma_dev->max_xor = 8;
dma_dev->device_prep_dma_xor = mv_xor_prep_dma_xor;
}
goto err_reg;
}
+ return;
+
err_reg:
debugf0("Error reading F2x%03x.\n", reg);
}
}
for (cs = 0; cs < pvt->num_dcsm; cs++) {
- reg = K8_DCSB0 + (cs * 4);
+ reg = K8_DCSM0 + (cs * 4);
err = pci_read_config_dword(pvt->dram_f2_ctl, reg,
&pvt->dcsm0[cs]);
if (unlikely(err))
amd64_dump_misc_regs(pvt);
+ return;
+
err_reg:
debugf0("Reading an MC register failed\n");
"ECC is enabled by BIOS, Proceeding "
"with EDAC module initialization\n");
+ /* Signal good ECC status */
+ ret = 0;
+
/* CLEAR the override, since BIOS controlled it */
ecc_enable_override = 0;
}
/* Intel X38 register addresses - device 0 function 0 - DRAM Controller */
#define X38_MCHBAR_LOW 0x48 /* MCH Memory Mapped Register BAR */
-#define X38_MCHBAR_HIGH 0x4b
+#define X38_MCHBAR_HIGH 0x4c
#define X38_MCHBAR_MASK 0xfffffc000ULL /* bits 35:14 */
#define X38_MMR_WINDOW_SIZE 16384
switch (fw_run_transaction(card, TCODE_LOCK_COMPARE_SWAP,
irm_id, generation, SCODE_100,
CSR_REGISTER_BASE + CSR_BANDWIDTH_AVAILABLE,
- data, sizeof(data))) {
+ data, 8)) {
case RCODE_GENERATION:
/* A generation change frees all bandwidth. */
return allocate ? -EAGAIN : bandwidth;
data[1] = old ^ c;
switch (fw_run_transaction(card, TCODE_LOCK_COMPARE_SWAP,
irm_id, generation, SCODE_100,
- offset, data, sizeof(data))) {
+ offset, data, 8)) {
case RCODE_GENERATION:
/* A generation change frees all channels. */
return allocate ? -EAGAIN : i;
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/pci.h>
+#include <linux/pci_ids.h>
#include <linux/spinlock.h>
#include <linux/string.h>
#define ohci_pmac_off(dev)
#endif /* CONFIG_PPC_PMAC */
+#define PCI_VENDOR_ID_AGERE PCI_VENDOR_ID_ATT
+#define PCI_DEVICE_ID_AGERE_FW643 0x5901
+
static int __devinit pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
version = reg_read(ohci, OHCI1394_Version) & 0x00ff00ff;
ohci->use_dualbuffer = version >= OHCI_VERSION_1_1;
+ /* dual-buffer mode is broken if more than one IR context is active */
+ if (dev->vendor == PCI_VENDOR_ID_AGERE &&
+ dev->device == PCI_DEVICE_ID_AGERE_FW643)
+ ohci->use_dualbuffer = false;
+
+ /* dual-buffer mode is broken */
+ if (dev->vendor == PCI_VENDOR_ID_RICOH &&
+ dev->device == PCI_DEVICE_ID_RICOH_R5C832)
+ ohci->use_dualbuffer = false;
+
/* x86-32 currently doesn't use highmem for dma_alloc_coherent */
#if !defined(CONFIG_X86_32)
/* dual-buffer mode is broken with descriptor addresses above 2G */
}
spin_unlock_irqrestore(&card->lock, flags);
- if (&orb->link != &lu->orb_list)
+ if (&orb->link != &lu->orb_list) {
orb->callback(orb, &status);
- else
+ kref_put(&orb->kref, free_orb);
+ } else {
fw_error("status write for unknown orb\n");
-
- kref_put(&orb->kref, free_orb);
+ }
fw_send_response(card, request, RCODE_COMPLETE);
}
}
EXPORT_SYMBOL(drm_mode_object_find);
-/**
- * drm_crtc_from_fb - find the CRTC structure associated with an fb
- * @dev: DRM device
- * @fb: framebuffer in question
- *
- * LOCKING:
- * Caller must hold mode_config lock.
- *
- * Find CRTC in the mode_config structure that matches @fb.
- *
- * RETURNS:
- * Pointer to the CRTC or NULL if it wasn't found.
- */
-struct drm_crtc *drm_crtc_from_fb(struct drm_device *dev,
- struct drm_framebuffer *fb)
-{
- struct drm_crtc *crtc;
-
- list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
- if (crtc->fb == fb)
- return crtc;
- }
- return NULL;
-}
-
/**
* drm_framebuffer_init - initialize a framebuffer
* @dev: DRM device
{
struct drm_device *dev = fb->dev;
struct drm_crtc *crtc;
+ struct drm_mode_set set;
+ int ret;
/* remove from any CRTC */
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
- if (crtc->fb == fb)
- crtc->fb = NULL;
+ if (crtc->fb == fb) {
+ /* should turn off the crtc */
+ memset(&set, 0, sizeof(struct drm_mode_set));
+ set.crtc = crtc;
+ set.fb = NULL;
+ ret = crtc->funcs->set_config(&set);
+ if (ret)
+ DRM_ERROR("failed to reset crtc %p when fb was deleted\n", crtc);
+ }
}
drm_mode_object_put(dev, &fb->base);
goto out;
}
- if (crtc_req->count_connectors > 0 && !mode && !fb) {
+ if (crtc_req->count_connectors > 0 && (!mode || !fb)) {
DRM_DEBUG("Count connectors is %d but no mode or fb set\n",
crtc_req->count_connectors);
ret = -EINVAL;
set.mode = mode;
set.connectors = connector_set;
set.num_connectors = crtc_req->count_connectors;
- set.fb =fb;
+ set.fb = fb;
ret = crtc->funcs->set_config(&set);
out:
struct drm_encoder **save_encoders, *new_encoder;
struct drm_framebuffer *old_fb = NULL;
bool save_enabled;
- bool mode_changed = false;
- bool fb_changed = false;
+ bool mode_changed = false; /* if true do a full mode set */
+ bool fb_changed = false; /* if true and !mode_changed just do a flip */
struct drm_connector *connector;
int count = 0, ro, fail = 0;
struct drm_crtc_helper_funcs *crtc_funcs;
if (set->crtc->fb == NULL) {
DRM_DEBUG("crtc has no fb, full mode set\n");
mode_changed = true;
+ } else if (set->fb == NULL) {
+ mode_changed = true;
} else if ((set->fb->bits_per_pixel !=
set->crtc->fb->bits_per_pixel) ||
set->fb->depth != set->crtc->fb->depth)
continue;
tmp = kmalloc(sizeof(struct drm_info_node), GFP_KERNEL);
+ if (tmp == NULL) {
+ ret = -1;
+ goto fail;
+ }
ent = debugfs_create_file(files[i].name, S_IFREG | S_IRUGO,
root, tmp, &drm_debugfs_fops);
if (!ent) {
struct detailed_non_pixel *data = &timing->data.other_data;
struct drm_display_mode *newmode;
- /* EDID up to and including 1.2 may put monitor info here */
- if (edid->version == 1 && edid->revision < 3)
- continue;
-
- /* Detailed mode timing */
- if (timing->pixel_clock) {
+ /* X server check is version 1.1 or higher */
+ if (edid->version == 1 && edid->revision >= 1 &&
+ !timing->pixel_clock) {
+ /* Other timing or info */
+ switch (data->type) {
+ case EDID_DETAIL_MONITOR_SERIAL:
+ break;
+ case EDID_DETAIL_MONITOR_STRING:
+ break;
+ case EDID_DETAIL_MONITOR_RANGE:
+ /* Get monitor range data */
+ break;
+ case EDID_DETAIL_MONITOR_NAME:
+ break;
+ case EDID_DETAIL_MONITOR_CPDATA:
+ break;
+ case EDID_DETAIL_STD_MODES:
+ /* Five modes per detailed section */
+ for (j = 0; j < 5; i++) {
+ struct std_timing *std;
+ struct drm_display_mode *newmode;
+
+ std = &data->data.timings[j];
+ newmode = drm_mode_std(dev, std);
+ if (newmode) {
+ drm_mode_probed_add(connector, newmode);
+ modes++;
+ }
+ }
+ break;
+ default:
+ break;
+ }
+ } else {
newmode = drm_mode_detailed(dev, edid, timing, quirks);
if (!newmode)
continue;
drm_mode_probed_add(connector, newmode);
modes++;
- continue;
- }
-
- /* Other timing or info */
- switch (data->type) {
- case EDID_DETAIL_MONITOR_SERIAL:
- break;
- case EDID_DETAIL_MONITOR_STRING:
- break;
- case EDID_DETAIL_MONITOR_RANGE:
- /* Get monitor range data */
- break;
- case EDID_DETAIL_MONITOR_NAME:
- break;
- case EDID_DETAIL_MONITOR_CPDATA:
- break;
- case EDID_DETAIL_STD_MODES:
- /* Five modes per detailed section */
- for (j = 0; j < 5; i++) {
- struct std_timing *std;
- struct drm_display_mode *newmode;
-
- std = &data->data.timings[j];
- newmode = drm_mode_std(dev, std);
- if (newmode) {
- drm_mode_probed_add(connector, newmode);
- modes++;
- }
- }
- break;
- default:
- break;
}
}
BUG_ON((size & (PAGE_SIZE - 1)) != 0);
obj = kzalloc(sizeof(*obj), GFP_KERNEL);
+ if (!obj)
+ goto free;
obj->dev = dev;
obj->filp = shmem_file_setup("drm mm object", size, VM_NORESERVE);
- if (IS_ERR(obj->filp)) {
- kfree(obj);
- return NULL;
- }
+ if (IS_ERR(obj->filp))
+ goto free;
kref_init(&obj->refcount);
kref_init(&obj->handlecount);
obj->size = size;
if (dev->driver->gem_init_object != NULL &&
dev->driver->gem_init_object(obj) != 0) {
- fput(obj->filp);
- kfree(obj);
- return NULL;
+ goto fput;
}
atomic_inc(&dev->object_count);
atomic_add(obj->size, &dev->object_memory);
return obj;
+fput:
+ fput(obj->filp);
+free:
+ kfree(obj);
+ return NULL;
}
EXPORT_SYMBOL(drm_gem_object_alloc);
ret = drm_vblank_get(dev, crtc);
if (ret) {
- DRM_ERROR("failed to acquire vblank counter, %d\n", ret);
+ DRM_DEBUG("failed to acquire vblank counter, %d\n", ret);
return ret;
}
seq = drm_vblank_count(dev, crtc);
found_it = 1;
/* if equal delete the probed mode */
mode->status = pmode->status;
+ /* Merge type bits together */
+ mode->type |= pmode->type;
list_del(&pmode->head);
drm_mode_destroy(connector->dev, pmode);
break;
*/
void drm_put_dev(struct drm_device *dev)
{
- struct drm_driver *driver = dev->driver;
+ struct drm_driver *driver;
struct drm_map_list *r_list, *list_temp;
DRM_DEBUG("\n");
DRM_ERROR("cleanup called no dev\n");
return;
}
+ driver = dev->driver;
drm_vblank_cleanup(dev);
#define to_drm_minor(d) container_of(d, struct drm_minor, kdev)
#define to_drm_connector(d) container_of(d, struct drm_connector, kdev)
+static struct device_type drm_sysfs_device_minor = {
+ .name = "drm_minor"
+};
+
/**
- * drm_sysfs_suspend - DRM class suspend hook
+ * drm_class_suspend - DRM class suspend hook
* @dev: Linux device to suspend
* @state: power state to enter
*
* Just figures out what the actual struct drm_device associated with
* @dev is and calls its suspend hook, if present.
*/
-static int drm_sysfs_suspend(struct device *dev, pm_message_t state)
+static int drm_class_suspend(struct device *dev, pm_message_t state)
{
- struct drm_minor *drm_minor = to_drm_minor(dev);
- struct drm_device *drm_dev = drm_minor->dev;
-
- if (drm_minor->type == DRM_MINOR_LEGACY &&
- !drm_core_check_feature(drm_dev, DRIVER_MODESET) &&
- drm_dev->driver->suspend)
- return drm_dev->driver->suspend(drm_dev, state);
-
+ if (dev->type == &drm_sysfs_device_minor) {
+ struct drm_minor *drm_minor = to_drm_minor(dev);
+ struct drm_device *drm_dev = drm_minor->dev;
+
+ if (drm_minor->type == DRM_MINOR_LEGACY &&
+ !drm_core_check_feature(drm_dev, DRIVER_MODESET) &&
+ drm_dev->driver->suspend)
+ return drm_dev->driver->suspend(drm_dev, state);
+ }
return 0;
}
/**
- * drm_sysfs_resume - DRM class resume hook
+ * drm_class_resume - DRM class resume hook
* @dev: Linux device to resume
*
* Just figures out what the actual struct drm_device associated with
* @dev is and calls its resume hook, if present.
*/
-static int drm_sysfs_resume(struct device *dev)
+static int drm_class_resume(struct device *dev)
{
- struct drm_minor *drm_minor = to_drm_minor(dev);
- struct drm_device *drm_dev = drm_minor->dev;
-
- if (drm_minor->type == DRM_MINOR_LEGACY &&
- !drm_core_check_feature(drm_dev, DRIVER_MODESET) &&
- drm_dev->driver->resume)
- return drm_dev->driver->resume(drm_dev);
-
+ if (dev->type == &drm_sysfs_device_minor) {
+ struct drm_minor *drm_minor = to_drm_minor(dev);
+ struct drm_device *drm_dev = drm_minor->dev;
+
+ if (drm_minor->type == DRM_MINOR_LEGACY &&
+ !drm_core_check_feature(drm_dev, DRIVER_MODESET) &&
+ drm_dev->driver->resume)
+ return drm_dev->driver->resume(drm_dev);
+ }
return 0;
}
goto err_out;
}
- class->suspend = drm_sysfs_suspend;
- class->resume = drm_sysfs_resume;
+ class->suspend = drm_class_suspend;
+ class->resume = drm_class_resume;
err = class_create_file(class, &class_attr_version);
if (err)
minor->kdev.class = drm_class;
minor->kdev.release = drm_sysfs_device_release;
minor->kdev.devt = minor->device;
+ minor->kdev.type = &drm_sysfs_device_minor;
if (minor->type == DRM_MINOR_CONTROL)
minor_str = "controlD%d";
else if (minor->type == DRM_MINOR_RENDER)
if (ret)
goto out_iomapfree;
+ dev_priv->wq = create_workqueue("i915");
+ if (dev_priv->wq == NULL) {
+ DRM_ERROR("Failed to create our workqueue.\n");
+ ret = -ENOMEM;
+ goto out_iomapfree;
+ }
+
/* enable GEM by default */
dev_priv->has_gem = 1;
if (!I915_NEED_GFX_HWS(dev)) {
ret = i915_init_phys_hws(dev);
if (ret != 0)
- goto out_iomapfree;
+ goto out_workqueue_free;
}
i915_get_mem_freq(dev);
ret = i915_load_modeset_init(dev, prealloc_size, agp_size);
if (ret < 0) {
DRM_ERROR("failed to init modeset\n");
- goto out_rmmap;
+ goto out_workqueue_free;
}
}
return 0;
+out_workqueue_free:
+ destroy_workqueue(dev_priv->wq);
out_iomapfree:
io_mapping_free(dev_priv->mm.gtt_mapping);
out_rmmap:
{
struct drm_i915_private *dev_priv = dev->dev_private;
+ destroy_workqueue(dev_priv->wq);
+
io_mapping_free(dev_priv->mm.gtt_mapping);
if (dev_priv->mm.gtt_mtrr >= 0) {
mtrr_del(dev_priv->mm.gtt_mtrr, dev->agp->base,
unsigned int lvds_vbt:1;
unsigned int int_crt_support:1;
unsigned int lvds_use_ssc:1;
+ unsigned int edp_support:1;
int lvds_ssc_freq;
+ int crt_ddc_bus; /* -1 = unknown, else GPIO to use for CRT DDC */
struct drm_i915_fence_reg fence_regs[16]; /* assume 965 */
int fence_reg_start; /* 4 if userland hasn't ioctl'd us yet */
int num_fence_regs; /* 8 on pre-965, 16 otherwise */
spinlock_t error_lock;
struct drm_i915_error_state *first_error;
+ struct work_struct error_work;
+ struct workqueue_struct *wq;
/* Register state */
u8 saveLBB;
*/
struct list_head inactive_list;
+ /** LRU list of objects with fence regs on them. */
+ struct list_head fence_list;
+
/**
* List of breadcrumbs associated with GPU requests currently
* outstanding.
/** This object's place on the active/flushing/inactive lists */
struct list_head list;
+ /** This object's place on the fenced object LRU */
+ struct list_head fence_list;
+
/**
* This is set if the object is on the active or flushing lists
* (has pending rendering), and is not set if it's on inactive (ready
IS_I915GM(dev)))
#define SUPPORTS_INTEGRATED_HDMI(dev) (IS_G4X(dev) || IS_IGDNG(dev))
#define SUPPORTS_INTEGRATED_DP(dev) (IS_G4X(dev) || IS_IGDNG(dev))
+#define SUPPORTS_EDP(dev) (IS_IGDNG_M(dev))
#define I915_HAS_HOTPLUG(dev) (IS_I945G(dev) || IS_I945GM(dev) || IS_I965G(dev))
/* dsparb controlled by hw only */
#define DSPARB_HWCONTROL(dev) (IS_G4X(dev) || IS_IGDNG(dev))
i915_gem_set_domain_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
+ struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_gem_set_domain *args = data;
struct drm_gem_object *obj;
uint32_t read_domains = args->read_domains;
obj, obj->size, read_domains, write_domain);
#endif
if (read_domains & I915_GEM_DOMAIN_GTT) {
+ struct drm_i915_gem_object *obj_priv = obj->driver_private;
+
ret = i915_gem_object_set_to_gtt_domain(obj, write_domain != 0);
+ /* Update the LRU on the fence for the CPU access that's
+ * about to occur.
+ */
+ if (obj_priv->fence_reg != I915_FENCE_REG_NONE) {
+ list_move_tail(&obj_priv->fence_list,
+ &dev_priv->mm.fence_list);
+ }
+
/* Silently promote "you're not bound, there was nothing to do"
* to success, since the client was just asking us to
* make sure everything was done.
}
/* Need a new fence register? */
- if (obj_priv->fence_reg == I915_FENCE_REG_NONE &&
- obj_priv->tiling_mode != I915_TILING_NONE) {
+ if (obj_priv->tiling_mode != I915_TILING_NONE) {
ret = i915_gem_object_get_fence_reg(obj);
if (ret) {
mutex_unlock(&dev->struct_mutex);
}
if (was_empty && !dev_priv->mm.suspended)
- schedule_delayed_work(&dev_priv->mm.retire_work, HZ);
+ queue_delayed_work(dev_priv->wq, &dev_priv->mm.retire_work, HZ);
return seqno;
}
i915_gem_retire_requests(dev);
if (!dev_priv->mm.suspended &&
!list_empty(&dev_priv->mm.request_list))
- schedule_delayed_work(&dev_priv->mm.retire_work, HZ);
+ queue_delayed_work(dev_priv->wq, &dev_priv->mm.retire_work, HZ);
mutex_unlock(&dev->struct_mutex);
}
struct drm_i915_gem_object *old_obj_priv = NULL;
int i, ret, avail;
+ /* Just update our place in the LRU if our fence is getting used. */
+ if (obj_priv->fence_reg != I915_FENCE_REG_NONE) {
+ list_move_tail(&obj_priv->fence_list, &dev_priv->mm.fence_list);
+ return 0;
+ }
+
switch (obj_priv->tiling_mode) {
case I915_TILING_NONE:
WARN(1, "allocating a fence for non-tiled object?\n");
}
/* First try to find a free reg */
-try_again:
avail = 0;
for (i = dev_priv->fence_reg_start; i < dev_priv->num_fence_regs; i++) {
reg = &dev_priv->fence_regs[i];
/* None available, try to steal one or wait for a user to finish */
if (i == dev_priv->num_fence_regs) {
- uint32_t seqno = dev_priv->mm.next_gem_seqno;
+ struct drm_gem_object *old_obj = NULL;
if (avail == 0)
return -ENOSPC;
- for (i = dev_priv->fence_reg_start;
- i < dev_priv->num_fence_regs; i++) {
- uint32_t this_seqno;
-
- reg = &dev_priv->fence_regs[i];
- old_obj_priv = reg->obj->driver_private;
+ list_for_each_entry(old_obj_priv, &dev_priv->mm.fence_list,
+ fence_list) {
+ old_obj = old_obj_priv->obj;
if (old_obj_priv->pin_count)
continue;
+ /* Take a reference, as otherwise the wait_rendering
+ * below may cause the object to get freed out from
+ * under us.
+ */
+ drm_gem_object_reference(old_obj);
+
/* i915 uses fences for GPU access to tiled buffers */
if (IS_I965G(dev) || !old_obj_priv->active)
break;
- /* find the seqno of the first available fence */
- this_seqno = old_obj_priv->last_rendering_seqno;
- if (this_seqno != 0 &&
- reg->obj->write_domain == 0 &&
- i915_seqno_passed(seqno, this_seqno))
- seqno = this_seqno;
- }
-
- /*
- * Now things get ugly... we have to wait for one of the
- * objects to finish before trying again.
- */
- if (i == dev_priv->num_fence_regs) {
- if (seqno == dev_priv->mm.next_gem_seqno) {
- i915_gem_flush(dev,
- I915_GEM_GPU_DOMAINS,
- I915_GEM_GPU_DOMAINS);
- seqno = i915_add_request(dev, NULL,
- I915_GEM_GPU_DOMAINS);
- if (seqno == 0)
- return -ENOMEM;
+ /* This brings the object to the head of the LRU if it
+ * had been written to. The only way this should
+ * result in us waiting longer than the expected
+ * optimal amount of time is if there was a
+ * fence-using buffer later that was read-only.
+ */
+ i915_gem_object_flush_gpu_write_domain(old_obj);
+ ret = i915_gem_object_wait_rendering(old_obj);
+ if (ret != 0) {
+ drm_gem_object_unreference(old_obj);
+ return ret;
}
- ret = i915_wait_request(dev, seqno);
- if (ret)
- return ret;
- goto try_again;
+ break;
}
/*
* Zap this virtual mapping so we can set up a fence again
* for this object next time we need it.
*/
- i915_gem_release_mmap(reg->obj);
+ i915_gem_release_mmap(old_obj);
+
+ i = old_obj_priv->fence_reg;
+ reg = &dev_priv->fence_regs[i];
+
old_obj_priv->fence_reg = I915_FENCE_REG_NONE;
+ list_del_init(&old_obj_priv->fence_list);
+
+ drm_gem_object_unreference(old_obj);
}
obj_priv->fence_reg = i;
+ list_add_tail(&obj_priv->fence_list, &dev_priv->mm.fence_list);
+
reg->obj = obj;
if (IS_I965G(dev))
dev_priv->fence_regs[obj_priv->fence_reg].obj = NULL;
obj_priv->fence_reg = I915_FENCE_REG_NONE;
+ list_del_init(&obj_priv->fence_list);
}
/**
* Pre-965 chips need a fence register set up in order to
* properly handle tiled surfaces.
*/
- if (!IS_I965G(dev) &&
- obj_priv->fence_reg == I915_FENCE_REG_NONE &&
- obj_priv->tiling_mode != I915_TILING_NONE) {
+ if (!IS_I965G(dev) && obj_priv->tiling_mode != I915_TILING_NONE) {
ret = i915_gem_object_get_fence_reg(obj);
if (ret != 0) {
if (ret != -EBUSY && ret != -ERESTARTSYS)
obj_priv->obj = obj;
obj_priv->fence_reg = I915_FENCE_REG_NONE;
INIT_LIST_HEAD(&obj_priv->list);
+ INIT_LIST_HEAD(&obj_priv->fence_list);
return 0;
}
i915_gem_leavevt_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
- int ret;
-
if (drm_core_check_feature(dev, DRIVER_MODESET))
return 0;
- ret = i915_gem_idle(dev);
drm_irq_uninstall(dev);
-
- return ret;
+ return i915_gem_idle(dev);
}
void
INIT_LIST_HEAD(&dev_priv->mm.flushing_list);
INIT_LIST_HEAD(&dev_priv->mm.inactive_list);
INIT_LIST_HEAD(&dev_priv->mm.request_list);
+ INIT_LIST_HEAD(&dev_priv->mm.fence_list);
INIT_DELAYED_WORK(&dev_priv->mm.retire_work,
i915_gem_retire_work_handler);
dev_priv->mm.next_gem_seqno = 1;
error = dev_priv->first_error;
+ seq_printf(m, "Time: %ld s %ld us\n", error->time.tv_sec,
+ error->time.tv_usec);
seq_printf(m, "EIR: 0x%08x\n", error->eir);
seq_printf(m, " PGTBL_ER: 0x%08x\n", error->pgtbl_er);
seq_printf(m, " INSTPM: 0x%08x\n", error->instpm);
low_frame = pipe ? PIPEBFRAMEPIXEL : PIPEAFRAMEPIXEL;
if (!i915_pipe_enabled(dev, pipe)) {
- DRM_ERROR("trying to get vblank count for disabled pipe %d\n", pipe);
+ DRM_DEBUG("trying to get vblank count for disabled pipe %d\n", pipe);
return 0;
}
int reg = pipe ? PIPEB_FRMCOUNT_GM45 : PIPEA_FRMCOUNT_GM45;
if (!i915_pipe_enabled(dev, pipe)) {
- DRM_ERROR("trying to get vblank count for disabled pipe %d\n", pipe);
+ DRM_DEBUG("trying to get vblank count for disabled pipe %d\n", pipe);
return 0;
}
return ret;
}
+/**
+ * i915_error_work_func - do process context error handling work
+ * @work: work struct
+ *
+ * Fire an error uevent so userspace can see that a hang or error
+ * was detected.
+ */
+static void i915_error_work_func(struct work_struct *work)
+{
+ drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
+ error_work);
+ struct drm_device *dev = dev_priv->dev;
+ char *event_string = "ERROR=1";
+ char *envp[] = { event_string, NULL };
+
+ DRM_DEBUG("generating error event\n");
+
+ kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, envp);
+}
+
+/**
+ * i915_capture_error_state - capture an error record for later analysis
+ * @dev: drm device
+ *
+ * Should be called when an error is detected (either a hang or an error
+ * interrupt) to capture error state from the time of the error. Fills
+ * out a structure which becomes available in debugfs for user level tools
+ * to pick up.
+ */
static void i915_capture_error_state(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
error->acthd = I915_READ(ACTHD_I965);
}
+ do_gettimeofday(&error->time);
+
dev_priv->first_error = error;
out:
spin_unlock_irqrestore(&dev_priv->error_lock, flags);
}
+/**
+ * i915_handle_error - handle an error interrupt
+ * @dev: drm device
+ *
+ * Do some basic checking of regsiter state at error interrupt time and
+ * dump it to the syslog. Also call i915_capture_error_state() to make
+ * sure we get a record and make it available in debugfs. Fire a uevent
+ * so userspace knows something bad happened (should trigger collection
+ * of a ring dump etc.).
+ */
+static void i915_handle_error(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 eir = I915_READ(EIR);
+ u32 pipea_stats = I915_READ(PIPEASTAT);
+ u32 pipeb_stats = I915_READ(PIPEBSTAT);
+
+ i915_capture_error_state(dev);
+
+ printk(KERN_ERR "render error detected, EIR: 0x%08x\n",
+ eir);
+
+ if (IS_G4X(dev)) {
+ if (eir & (GM45_ERROR_MEM_PRIV | GM45_ERROR_CP_PRIV)) {
+ u32 ipeir = I915_READ(IPEIR_I965);
+
+ printk(KERN_ERR " IPEIR: 0x%08x\n",
+ I915_READ(IPEIR_I965));
+ printk(KERN_ERR " IPEHR: 0x%08x\n",
+ I915_READ(IPEHR_I965));
+ printk(KERN_ERR " INSTDONE: 0x%08x\n",
+ I915_READ(INSTDONE_I965));
+ printk(KERN_ERR " INSTPS: 0x%08x\n",
+ I915_READ(INSTPS));
+ printk(KERN_ERR " INSTDONE1: 0x%08x\n",
+ I915_READ(INSTDONE1));
+ printk(KERN_ERR " ACTHD: 0x%08x\n",
+ I915_READ(ACTHD_I965));
+ I915_WRITE(IPEIR_I965, ipeir);
+ (void)I915_READ(IPEIR_I965);
+ }
+ if (eir & GM45_ERROR_PAGE_TABLE) {
+ u32 pgtbl_err = I915_READ(PGTBL_ER);
+ printk(KERN_ERR "page table error\n");
+ printk(KERN_ERR " PGTBL_ER: 0x%08x\n",
+ pgtbl_err);
+ I915_WRITE(PGTBL_ER, pgtbl_err);
+ (void)I915_READ(PGTBL_ER);
+ }
+ }
+
+ if (IS_I9XX(dev)) {
+ if (eir & I915_ERROR_PAGE_TABLE) {
+ u32 pgtbl_err = I915_READ(PGTBL_ER);
+ printk(KERN_ERR "page table error\n");
+ printk(KERN_ERR " PGTBL_ER: 0x%08x\n",
+ pgtbl_err);
+ I915_WRITE(PGTBL_ER, pgtbl_err);
+ (void)I915_READ(PGTBL_ER);
+ }
+ }
+
+ if (eir & I915_ERROR_MEMORY_REFRESH) {
+ printk(KERN_ERR "memory refresh error\n");
+ printk(KERN_ERR "PIPEASTAT: 0x%08x\n",
+ pipea_stats);
+ printk(KERN_ERR "PIPEBSTAT: 0x%08x\n",
+ pipeb_stats);
+ /* pipestat has already been acked */
+ }
+ if (eir & I915_ERROR_INSTRUCTION) {
+ printk(KERN_ERR "instruction error\n");
+ printk(KERN_ERR " INSTPM: 0x%08x\n",
+ I915_READ(INSTPM));
+ if (!IS_I965G(dev)) {
+ u32 ipeir = I915_READ(IPEIR);
+
+ printk(KERN_ERR " IPEIR: 0x%08x\n",
+ I915_READ(IPEIR));
+ printk(KERN_ERR " IPEHR: 0x%08x\n",
+ I915_READ(IPEHR));
+ printk(KERN_ERR " INSTDONE: 0x%08x\n",
+ I915_READ(INSTDONE));
+ printk(KERN_ERR " ACTHD: 0x%08x\n",
+ I915_READ(ACTHD));
+ I915_WRITE(IPEIR, ipeir);
+ (void)I915_READ(IPEIR);
+ } else {
+ u32 ipeir = I915_READ(IPEIR_I965);
+
+ printk(KERN_ERR " IPEIR: 0x%08x\n",
+ I915_READ(IPEIR_I965));
+ printk(KERN_ERR " IPEHR: 0x%08x\n",
+ I915_READ(IPEHR_I965));
+ printk(KERN_ERR " INSTDONE: 0x%08x\n",
+ I915_READ(INSTDONE_I965));
+ printk(KERN_ERR " INSTPS: 0x%08x\n",
+ I915_READ(INSTPS));
+ printk(KERN_ERR " INSTDONE1: 0x%08x\n",
+ I915_READ(INSTDONE1));
+ printk(KERN_ERR " ACTHD: 0x%08x\n",
+ I915_READ(ACTHD_I965));
+ I915_WRITE(IPEIR_I965, ipeir);
+ (void)I915_READ(IPEIR_I965);
+ }
+ }
+
+ I915_WRITE(EIR, eir);
+ (void)I915_READ(EIR);
+ eir = I915_READ(EIR);
+ if (eir) {
+ /*
+ * some errors might have become stuck,
+ * mask them.
+ */
+ DRM_ERROR("EIR stuck: 0x%08x, masking\n", eir);
+ I915_WRITE(EMR, I915_READ(EMR) | eir);
+ I915_WRITE(IIR, I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT);
+ }
+
+ queue_work(dev_priv->wq, &dev_priv->error_work);
+}
+
irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
{
struct drm_device *dev = (struct drm_device *) arg;
pipea_stats = I915_READ(PIPEASTAT);
pipeb_stats = I915_READ(PIPEBSTAT);
+ if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT)
+ i915_handle_error(dev);
+
/*
* Clear the PIPE(A|B)STAT regs before the IIR
*/
DRM_DEBUG("hotplug event received, stat 0x%08x\n",
hotplug_status);
if (hotplug_status & dev_priv->hotplug_supported_mask)
- schedule_work(&dev_priv->hotplug_work);
+ queue_work(dev_priv->wq,
+ &dev_priv->hotplug_work);
I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status);
I915_READ(PORT_HOTPLUG_STAT);
}
- if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT) {
- u32 eir = I915_READ(EIR);
-
- i915_capture_error_state(dev);
-
- printk(KERN_ERR "render error detected, EIR: 0x%08x\n",
- eir);
- if (eir & I915_ERROR_PAGE_TABLE) {
- u32 pgtbl_err = I915_READ(PGTBL_ER);
- printk(KERN_ERR "page table error\n");
- printk(KERN_ERR " PGTBL_ER: 0x%08x\n",
- pgtbl_err);
- I915_WRITE(PGTBL_ER, pgtbl_err);
- (void)I915_READ(PGTBL_ER);
- }
- if (eir & I915_ERROR_MEMORY_REFRESH) {
- printk(KERN_ERR "memory refresh error\n");
- printk(KERN_ERR "PIPEASTAT: 0x%08x\n",
- pipea_stats);
- printk(KERN_ERR "PIPEBSTAT: 0x%08x\n",
- pipeb_stats);
- /* pipestat has already been acked */
- }
- if (eir & I915_ERROR_INSTRUCTION) {
- printk(KERN_ERR "instruction error\n");
- printk(KERN_ERR " INSTPM: 0x%08x\n",
- I915_READ(INSTPM));
- if (!IS_I965G(dev)) {
- u32 ipeir = I915_READ(IPEIR);
-
- printk(KERN_ERR " IPEIR: 0x%08x\n",
- I915_READ(IPEIR));
- printk(KERN_ERR " IPEHR: 0x%08x\n",
- I915_READ(IPEHR));
- printk(KERN_ERR " INSTDONE: 0x%08x\n",
- I915_READ(INSTDONE));
- printk(KERN_ERR " ACTHD: 0x%08x\n",
- I915_READ(ACTHD));
- I915_WRITE(IPEIR, ipeir);
- (void)I915_READ(IPEIR);
- } else {
- u32 ipeir = I915_READ(IPEIR_I965);
-
- printk(KERN_ERR " IPEIR: 0x%08x\n",
- I915_READ(IPEIR_I965));
- printk(KERN_ERR " IPEHR: 0x%08x\n",
- I915_READ(IPEHR_I965));
- printk(KERN_ERR " INSTDONE: 0x%08x\n",
- I915_READ(INSTDONE_I965));
- printk(KERN_ERR " INSTPS: 0x%08x\n",
- I915_READ(INSTPS));
- printk(KERN_ERR " INSTDONE1: 0x%08x\n",
- I915_READ(INSTDONE1));
- printk(KERN_ERR " ACTHD: 0x%08x\n",
- I915_READ(ACTHD_I965));
- I915_WRITE(IPEIR_I965, ipeir);
- (void)I915_READ(IPEIR_I965);
- }
- }
-
- I915_WRITE(EIR, eir);
- (void)I915_READ(EIR);
- eir = I915_READ(EIR);
- if (eir) {
- /*
- * some errors might have become stuck,
- * mask them.
- */
- DRM_ERROR("EIR stuck: 0x%08x, masking\n", eir);
- I915_WRITE(EMR, I915_READ(EMR) | eir);
- I915_WRITE(IIR, I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT);
- }
- }
-
I915_WRITE(IIR, iir);
new_iir = I915_READ(IIR); /* Flush posted writes */
atomic_set(&dev_priv->irq_received, 0);
INIT_WORK(&dev_priv->hotplug_work, i915_hotplug_work_func);
+ INIT_WORK(&dev_priv->error_work, i915_error_work_func);
if (IS_IGDNG(dev)) {
igdng_irq_preinstall(dev);
#define TV_V_CHROMA_42 0x684a8
/* Display Port */
+#define DP_A 0x64000 /* eDP */
#define DP_B 0x64100
#define DP_C 0x64200
#define DP_D 0x64300
/* Mystic DPCD version 1.1 special mode */
#define DP_ENHANCED_FRAMING (1 << 18)
+/* eDP */
+#define DP_PLL_FREQ_270MHZ (0 << 16)
+#define DP_PLL_FREQ_160MHZ (1 << 16)
+#define DP_PLL_FREQ_MASK (3 << 16)
+
/** locked once port is enabled */
#define DP_PORT_REVERSAL (1 << 15)
+/* eDP */
+#define DP_PLL_ENABLE (1 << 14)
+
/** sends the clock on lane 15 of the PEG for debug */
#define DP_CLOCK_OUTPUT_ENABLE (1 << 13)
#define DP_SCRAMBLING_DISABLE (1 << 12)
+#define DP_SCRAMBLING_DISABLE_IGDNG (1 << 7)
/** limit RGB values to avoid confusing TVs */
#define DP_COLOR_RANGE_16_235 (1 << 8)
* is 20 bytes in each direction, hence the 5 fixed
* data registers
*/
+#define DPA_AUX_CH_CTL 0x64010
+#define DPA_AUX_CH_DATA1 0x64014
+#define DPA_AUX_CH_DATA2 0x64018
+#define DPA_AUX_CH_DATA3 0x6401c
+#define DPA_AUX_CH_DATA4 0x64020
+#define DPA_AUX_CH_DATA5 0x64024
+
#define DPB_AUX_CH_CTL 0x64110
#define DPB_AUX_CH_DATA1 0x64114
#define DPB_AUX_CH_DATA2 0x64118
#define I830_FIFO_LINE_SIZE 32
#define I945_FIFO_SIZE 127 /* 945 & 965 */
#define I915_FIFO_SIZE 95
-#define I855GM_FIFO_SIZE 255
+#define I855GM_FIFO_SIZE 127 /* In cachelines */
#define I830_FIFO_SIZE 95
#define I915_MAX_WM 0x3f
#define PFA_CTL_1 0x68080
#define PFB_CTL_1 0x68880
#define PF_ENABLE (1<<31)
+#define PFA_WIN_SZ 0x68074
+#define PFB_WIN_SZ 0x68874
/* legacy palette */
#define LGC_PALETTE_A 0x4a000
#define PCH_PP_OFF_DELAYS 0xc720c
#define PCH_PP_DIVISOR 0xc7210
+#define PCH_DP_B 0xe4100
+#define PCH_DPB_AUX_CH_CTL 0xe4110
+#define PCH_DPB_AUX_CH_DATA1 0xe4114
+#define PCH_DPB_AUX_CH_DATA2 0xe4118
+#define PCH_DPB_AUX_CH_DATA3 0xe411c
+#define PCH_DPB_AUX_CH_DATA4 0xe4120
+#define PCH_DPB_AUX_CH_DATA5 0xe4124
+
+#define PCH_DP_C 0xe4200
+#define PCH_DPC_AUX_CH_CTL 0xe4210
+#define PCH_DPC_AUX_CH_DATA1 0xe4214
+#define PCH_DPC_AUX_CH_DATA2 0xe4218
+#define PCH_DPC_AUX_CH_DATA3 0xe421c
+#define PCH_DPC_AUX_CH_DATA4 0xe4220
+#define PCH_DPC_AUX_CH_DATA5 0xe4224
+
+#define PCH_DP_D 0xe4300
+#define PCH_DPD_AUX_CH_CTL 0xe4310
+#define PCH_DPD_AUX_CH_DATA1 0xe4314
+#define PCH_DPD_AUX_CH_DATA2 0xe4318
+#define PCH_DPD_AUX_CH_DATA3 0xe431c
+#define PCH_DPD_AUX_CH_DATA4 0xe4320
+#define PCH_DPD_AUX_CH_DATA5 0xe4324
+
#endif /* _I915_REG_H_ */
for (i = 0; i < 16; i++) {
I915_WRITE(SWF00 + (i << 2), dev_priv->saveSWF0[i]);
- I915_WRITE(SWF10 + (i << 2), dev_priv->saveSWF1[i+7]);
+ I915_WRITE(SWF10 + (i << 2), dev_priv->saveSWF1[i]);
}
for (i = 0; i < 3; i++)
I915_WRITE(SWF30 + (i << 2), dev_priv->saveSWF2[i]);
return NULL;
}
+static u16
+get_blocksize(void *p)
+{
+ u16 *block_ptr, block_size;
+
+ block_ptr = (u16 *)((char *)p - 2);
+ block_size = *block_ptr;
+ return block_size;
+}
+
static void
fill_detail_timing_data(struct drm_display_mode *panel_fixed_mode,
struct lvds_dvo_timing *dvo_timing)
parse_lfp_panel_data(struct drm_i915_private *dev_priv,
struct bdb_header *bdb)
{
- struct drm_device *dev = dev_priv->dev;
struct bdb_lvds_options *lvds_options;
struct bdb_lvds_lfp_data *lvds_lfp_data;
struct bdb_lvds_lfp_data_ptrs *lvds_lfp_data_ptrs;
struct bdb_lvds_lfp_data_entry *entry;
struct lvds_dvo_timing *dvo_timing;
struct drm_display_mode *panel_fixed_mode;
- int lfp_data_size;
+ int lfp_data_size, dvo_timing_offset;
/* Defaults if we can't find VBT info */
dev_priv->lvds_dither = 0;
entry = (struct bdb_lvds_lfp_data_entry *)
((uint8_t *)lvds_lfp_data->data + (lfp_data_size *
lvds_options->panel_type));
+ dvo_timing_offset = lvds_lfp_data_ptrs->ptr[0].dvo_timing_offset -
+ lvds_lfp_data_ptrs->ptr[0].fp_timing_offset;
- /* On IGDNG mobile, LVDS data block removes panel fitting registers.
- So dec 2 dword from dvo_timing offset */
- if (IS_IGDNG(dev))
- dvo_timing = (struct lvds_dvo_timing *)
- ((u8 *)&entry->dvo_timing - 8);
- else
- dvo_timing = &entry->dvo_timing;
+ /*
+ * the size of fp_timing varies on the different platform.
+ * So calculate the DVO timing relative offset in LVDS data
+ * entry to get the DVO timing entry
+ */
+ dvo_timing = (struct lvds_dvo_timing *)
+ ((unsigned char *)entry + dvo_timing_offset);
panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL);
}
}
+static void
+parse_general_definitions(struct drm_i915_private *dev_priv,
+ struct bdb_header *bdb)
+{
+ struct bdb_general_definitions *general;
+ const int crt_bus_map_table[] = {
+ GPIOB,
+ GPIOA,
+ GPIOC,
+ GPIOD,
+ GPIOE,
+ GPIOF,
+ };
+
+ /* Set sensible defaults in case we can't find the general block
+ or it is the wrong chipset */
+ dev_priv->crt_ddc_bus = -1;
+
+ general = find_section(bdb, BDB_GENERAL_DEFINITIONS);
+ if (general) {
+ u16 block_size = get_blocksize(general);
+ if (block_size >= sizeof(*general)) {
+ int bus_pin = general->crt_ddc_gmbus_pin;
+ DRM_DEBUG("crt_ddc_bus_pin: %d\n", bus_pin);
+ if ((bus_pin >= 1) && (bus_pin <= 6)) {
+ dev_priv->crt_ddc_bus =
+ crt_bus_map_table[bus_pin-1];
+ }
+ } else {
+ DRM_DEBUG("BDB_GD too small (%d). Invalid.\n",
+ block_size);
+ }
+ }
+}
+
static void
parse_sdvo_device_mapping(struct drm_i915_private *dev_priv,
struct bdb_header *bdb)
struct bdb_general_definitions *p_defs;
struct child_device_config *p_child;
int i, child_device_num, count;
- u16 block_size, *block_ptr;
+ u16 block_size;
p_defs = find_section(bdb, BDB_GENERAL_DEFINITIONS);
if (!p_defs) {
return;
}
/* get the block size of general definitions */
- block_ptr = (u16 *)((char *)p_defs - 2);
- block_size = *block_ptr;
+ block_size = get_blocksize(p_defs);
/* get the number of child device */
child_device_num = (block_size - sizeof(*p_defs)) /
sizeof(*p_child);
}
return;
}
+
+static void
+parse_driver_features(struct drm_i915_private *dev_priv,
+ struct bdb_header *bdb)
+{
+ struct drm_device *dev = dev_priv->dev;
+ struct bdb_driver_features *driver;
+
+ /* set default for chips without eDP */
+ if (!SUPPORTS_EDP(dev)) {
+ dev_priv->edp_support = 0;
+ return;
+ }
+
+ driver = find_section(bdb, BDB_DRIVER_FEATURES);
+ if (driver && driver->lvds_config == BDB_DRIVER_FEATURE_EDP)
+ dev_priv->edp_support = 1;
+}
+
/**
* intel_init_bios - initialize VBIOS settings & find VBT
* @dev: DRM device
/* Grab useful general definitions */
parse_general_features(dev_priv, bdb);
+ parse_general_definitions(dev_priv, bdb);
parse_lfp_panel_data(dev_priv, bdb);
parse_sdvo_panel_data(dev_priv, bdb);
parse_sdvo_device_mapping(dev_priv, bdb);
+ parse_driver_features(dev_priv, bdb);
+
pci_unmap_rom(pdev, bios);
return 0;
} __attribute__((packed));
+#define BDB_DRIVER_FEATURE_NO_LVDS 0
+#define BDB_DRIVER_FEATURE_INT_LVDS 1
+#define BDB_DRIVER_FEATURE_SDVO_LVDS 2
+#define BDB_DRIVER_FEATURE_EDP 3
+
+struct bdb_driver_features {
+ u8 boot_dev_algorithm:1;
+ u8 block_display_switch:1;
+ u8 allow_display_switch:1;
+ u8 hotplug_dvo:1;
+ u8 dual_view_zoom:1;
+ u8 int15h_hook:1;
+ u8 sprite_in_clone:1;
+ u8 primary_lfp_id:1;
+
+ u16 boot_mode_x;
+ u16 boot_mode_y;
+ u8 boot_mode_bpp;
+ u8 boot_mode_refresh;
+
+ u16 enable_lfp_primary:1;
+ u16 selective_mode_pruning:1;
+ u16 dual_frequency:1;
+ u16 render_clock_freq:1; /* 0: high freq; 1: low freq */
+ u16 nt_clone_support:1;
+ u16 power_scheme_ui:1; /* 0: CUI; 1: 3rd party */
+ u16 sprite_display_assign:1; /* 0: secondary; 1: primary */
+ u16 cui_aspect_scaling:1;
+ u16 preserve_aspect_ratio:1;
+ u16 sdvo_device_power_down:1;
+ u16 crt_hotplug:1;
+ u16 lvds_config:2;
+ u16 tv_hotplug:1;
+ u16 hdmi_config:2;
+
+ u8 static_display:1;
+ u8 reserved2:7;
+ u16 legacy_crt_max_x;
+ u16 legacy_crt_max_y;
+ u8 legacy_crt_max_refresh;
+
+ u8 hdmi_termination;
+ u8 custom_vbt_version;
+} __attribute__((packed));
+
bool intel_init_bios(struct drm_device *dev);
/*
temp = adpa = I915_READ(PCH_ADPA);
+ adpa &= ~ADPA_DAC_ENABLE;
+ I915_WRITE(PCH_ADPA, adpa);
+
adpa &= ~ADPA_CRT_HOTPLUG_MASK;
adpa |= (ADPA_CRT_HOTPLUG_PERIOD_128 |
DRM_DEBUG("pch crt adpa 0x%x", adpa);
I915_WRITE(PCH_ADPA, adpa);
- /* This might not be needed as not specified in spec...*/
- udelay(1000);
+ while ((I915_READ(PCH_ADPA) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) != 0)
+ ;
/* Check the status to see if both blue and green are on now */
adpa = I915_READ(PCH_ADPA);
- if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) ==
- ADPA_CRT_HOTPLUG_MONITOR_COLOR)
+ adpa &= ADPA_CRT_HOTPLUG_MONITOR_MASK;
+ if ((adpa == ADPA_CRT_HOTPLUG_MONITOR_COLOR) ||
+ (adpa == ADPA_CRT_HOTPLUG_MONITOR_MONO))
ret = true;
else
ret = false;
{
struct drm_connector *connector;
struct intel_output *intel_output;
+ struct drm_i915_private *dev_priv = dev->dev_private;
u32 i2c_reg;
intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL);
/* Set up the DDC bus. */
if (IS_IGDNG(dev))
i2c_reg = PCH_GPIOA;
- else
+ else {
i2c_reg = GPIOA;
+ /* Use VBT information for CRT DDC if available */
+ if (dev_priv->crt_ddc_bus != -1)
+ i2c_reg = dev_priv->crt_ddc_bus;
+ }
intel_output->ddc_bus = intel_i2c_create(dev, i2c_reg, "CRTDDC_A");
if (!intel_output->ddc_bus) {
dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration "
}
intel_output->type = INTEL_OUTPUT_ANALOG;
+ intel_output->clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
+ (1 << INTEL_ANALOG_CLONE_BIT) |
+ (1 << INTEL_SDVO_LVDS_CLONE_BIT);
+ intel_output->crtc_mask = (1 << 0) | (1 << 1);
connector->interlace_allowed = 0;
connector->doublescan_allowed = 0;
#include "drm_crtc_helper.h"
+#define HAS_eDP (intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))
+
bool intel_pipe_has_type (struct drm_crtc *crtc, int type);
static void intel_update_watermarks(struct drm_device *dev);
#define I8XX_P2_SLOW 4
#define I8XX_P2_FAST 2
#define I8XX_P2_LVDS_SLOW 14
-#define I8XX_P2_LVDS_FAST 14 /* No fast option */
+#define I8XX_P2_LVDS_FAST 7
#define I8XX_P2_SLOW_LIMIT 165000
#define I9XX_DOT_MIN 20000
static bool
intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc,
int target, int refclk, intel_clock_t *best_clock);
+static bool
+intel_find_pll_igdng_dp(const intel_limit_t *, struct drm_crtc *crtc,
+ int target, int refclk, intel_clock_t *best_clock);
static const intel_limit_t intel_limits_i8xx_dvo = {
.dot = { .min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX },
return false;
}
+struct drm_connector *
+intel_pipe_get_output (struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_mode_config *mode_config = &dev->mode_config;
+ struct drm_connector *l_entry, *ret = NULL;
+
+ list_for_each_entry(l_entry, &mode_config->connector_list, head) {
+ if (l_entry->encoder &&
+ l_entry->encoder->crtc == crtc) {
+ ret = l_entry;
+ break;
+ }
+ }
+ return ret;
+}
+
#define INTELPllInvalid(s) do { /* DRM_DEBUG(s); */ return false; } while (0)
/**
* Returns whether the given set of divisors are valid for a given refclk with
intel_clock_t clock;
int err = target;
- if (IS_I9XX(dev) && intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
- (I915_READ(LVDS) & LVDS_PORT_EN) != 0) {
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
+ (I915_READ(LVDS)) != 0) {
/*
* For LVDS, if the panel is on, just rely on its current
* settings for dual-channel. We haven't figured out how to
return found;
}
+static bool
+intel_find_pll_igdng_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
+ int target, int refclk, intel_clock_t *best_clock)
+{
+ struct drm_device *dev = crtc->dev;
+ intel_clock_t clock;
+ if (target < 200000) {
+ clock.n = 1;
+ clock.p1 = 2;
+ clock.p2 = 10;
+ clock.m1 = 12;
+ clock.m2 = 9;
+ } else {
+ clock.n = 2;
+ clock.p1 = 1;
+ clock.p2 = 10;
+ clock.m1 = 14;
+ clock.m2 = 8;
+ }
+ intel_clock(dev, refclk, &clock);
+ memcpy(best_clock, &clock, sizeof(intel_clock_t));
+ return true;
+}
+
static bool
intel_igdng_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
int target, int refclk, intel_clock_t *best_clock)
int err_most = 47;
found = false;
+ /* eDP has only 2 clock choice, no n/m/p setting */
+ if (HAS_eDP)
+ return true;
+
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT))
+ return intel_find_pll_igdng_dp(limit, crtc, target,
+ refclk, best_clock);
+
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
LVDS_CLKB_POWER_UP)
return 0;
}
+/* Disable the VGA plane that we never use */
+static void i915_disable_vga (struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u8 sr1;
+ u32 vga_reg;
+
+ if (IS_IGDNG(dev))
+ vga_reg = CPU_VGACNTRL;
+ else
+ vga_reg = VGACNTRL;
+
+ if (I915_READ(vga_reg) & VGA_DISP_DISABLE)
+ return;
+
+ I915_WRITE8(VGA_SR_INDEX, 1);
+ sr1 = I915_READ8(VGA_SR_DATA);
+ I915_WRITE8(VGA_SR_DATA, sr1 | (1 << 5));
+ udelay(100);
+
+ I915_WRITE(vga_reg, VGA_DISP_DISABLE);
+}
+
+static void igdng_disable_pll_edp (struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 dpa_ctl;
+
+ DRM_DEBUG("\n");
+ dpa_ctl = I915_READ(DP_A);
+ dpa_ctl &= ~DP_PLL_ENABLE;
+ I915_WRITE(DP_A, dpa_ctl);
+}
+
+static void igdng_enable_pll_edp (struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 dpa_ctl;
+
+ dpa_ctl = I915_READ(DP_A);
+ dpa_ctl |= DP_PLL_ENABLE;
+ I915_WRITE(DP_A, dpa_ctl);
+ udelay(200);
+}
+
+
+static void igdng_set_pll_edp (struct drm_crtc *crtc, int clock)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 dpa_ctl;
+
+ DRM_DEBUG("eDP PLL enable for clock %d\n", clock);
+ dpa_ctl = I915_READ(DP_A);
+ dpa_ctl &= ~DP_PLL_FREQ_MASK;
+
+ if (clock < 200000) {
+ u32 temp;
+ dpa_ctl |= DP_PLL_FREQ_160MHZ;
+ /* workaround for 160Mhz:
+ 1) program 0x4600c bits 15:0 = 0x8124
+ 2) program 0x46010 bit 0 = 1
+ 3) program 0x46034 bit 24 = 1
+ 4) program 0x64000 bit 14 = 1
+ */
+ temp = I915_READ(0x4600c);
+ temp &= 0xffff0000;
+ I915_WRITE(0x4600c, temp | 0x8124);
+
+ temp = I915_READ(0x46010);
+ I915_WRITE(0x46010, temp | 1);
+
+ temp = I915_READ(0x46034);
+ I915_WRITE(0x46034, temp | (1 << 24));
+ } else {
+ dpa_ctl |= DP_PLL_FREQ_270MHZ;
+ }
+ I915_WRITE(DP_A, dpa_ctl);
+
+ udelay(500);
+}
+
static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode)
{
struct drm_device *dev = crtc->dev;
int fdi_rx_imr_reg = (pipe == 0) ? FDI_RXA_IMR : FDI_RXB_IMR;
int transconf_reg = (pipe == 0) ? TRANSACONF : TRANSBCONF;
int pf_ctl_reg = (pipe == 0) ? PFA_CTL_1 : PFB_CTL_1;
+ int pf_win_size = (pipe == 0) ? PFA_WIN_SZ : PFB_WIN_SZ;
int cpu_htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
int cpu_hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
int cpu_hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B;
int trans_vblank_reg = (pipe == 0) ? TRANS_VBLANK_A : TRANS_VBLANK_B;
int trans_vsync_reg = (pipe == 0) ? TRANS_VSYNC_A : TRANS_VSYNC_B;
u32 temp;
- int tries = 5, j;
+ int tries = 5, j, n;
/* XXX: When our outputs are all unaware of DPMS modes other than off
* and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
case DRM_MODE_DPMS_STANDBY:
case DRM_MODE_DPMS_SUSPEND:
DRM_DEBUG("crtc %d dpms on\n", pipe);
- /* enable PCH DPLL */
- temp = I915_READ(pch_dpll_reg);
- if ((temp & DPLL_VCO_ENABLE) == 0) {
- I915_WRITE(pch_dpll_reg, temp | DPLL_VCO_ENABLE);
- I915_READ(pch_dpll_reg);
- }
-
- /* enable PCH FDI RX PLL, wait warmup plus DMI latency */
- temp = I915_READ(fdi_rx_reg);
- I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE |
- FDI_SEL_PCDCLK |
- FDI_DP_PORT_WIDTH_X4); /* default 4 lanes */
- I915_READ(fdi_rx_reg);
- udelay(200);
+ if (HAS_eDP) {
+ /* enable eDP PLL */
+ igdng_enable_pll_edp(crtc);
+ } else {
+ /* enable PCH DPLL */
+ temp = I915_READ(pch_dpll_reg);
+ if ((temp & DPLL_VCO_ENABLE) == 0) {
+ I915_WRITE(pch_dpll_reg, temp | DPLL_VCO_ENABLE);
+ I915_READ(pch_dpll_reg);
+ }
- /* Enable CPU FDI TX PLL, always on for IGDNG */
- temp = I915_READ(fdi_tx_reg);
- if ((temp & FDI_TX_PLL_ENABLE) == 0) {
- I915_WRITE(fdi_tx_reg, temp | FDI_TX_PLL_ENABLE);
- I915_READ(fdi_tx_reg);
- udelay(100);
+ /* enable PCH FDI RX PLL, wait warmup plus DMI latency */
+ temp = I915_READ(fdi_rx_reg);
+ I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE |
+ FDI_SEL_PCDCLK |
+ FDI_DP_PORT_WIDTH_X4); /* default 4 lanes */
+ I915_READ(fdi_rx_reg);
+ udelay(200);
+
+ /* Enable CPU FDI TX PLL, always on for IGDNG */
+ temp = I915_READ(fdi_tx_reg);
+ if ((temp & FDI_TX_PLL_ENABLE) == 0) {
+ I915_WRITE(fdi_tx_reg, temp | FDI_TX_PLL_ENABLE);
+ I915_READ(fdi_tx_reg);
+ udelay(100);
+ }
}
/* Enable CPU pipe */
I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
}
- /* enable CPU FDI TX and PCH FDI RX */
- temp = I915_READ(fdi_tx_reg);
- temp |= FDI_TX_ENABLE;
- temp |= FDI_DP_PORT_WIDTH_X4; /* default */
- temp &= ~FDI_LINK_TRAIN_NONE;
- temp |= FDI_LINK_TRAIN_PATTERN_1;
- I915_WRITE(fdi_tx_reg, temp);
- I915_READ(fdi_tx_reg);
+ if (!HAS_eDP) {
+ /* enable CPU FDI TX and PCH FDI RX */
+ temp = I915_READ(fdi_tx_reg);
+ temp |= FDI_TX_ENABLE;
+ temp |= FDI_DP_PORT_WIDTH_X4; /* default */
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_PATTERN_1;
+ I915_WRITE(fdi_tx_reg, temp);
+ I915_READ(fdi_tx_reg);
- temp = I915_READ(fdi_rx_reg);
- temp &= ~FDI_LINK_TRAIN_NONE;
- temp |= FDI_LINK_TRAIN_PATTERN_1;
- I915_WRITE(fdi_rx_reg, temp | FDI_RX_ENABLE);
- I915_READ(fdi_rx_reg);
+ temp = I915_READ(fdi_rx_reg);
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_PATTERN_1;
+ I915_WRITE(fdi_rx_reg, temp | FDI_RX_ENABLE);
+ I915_READ(fdi_rx_reg);
- udelay(150);
+ udelay(150);
- /* Train FDI. */
- /* umask FDI RX Interrupt symbol_lock and bit_lock bit
- for train result */
- temp = I915_READ(fdi_rx_imr_reg);
- temp &= ~FDI_RX_SYMBOL_LOCK;
- temp &= ~FDI_RX_BIT_LOCK;
- I915_WRITE(fdi_rx_imr_reg, temp);
- I915_READ(fdi_rx_imr_reg);
- udelay(150);
+ /* Train FDI. */
+ /* umask FDI RX Interrupt symbol_lock and bit_lock bit
+ for train result */
+ temp = I915_READ(fdi_rx_imr_reg);
+ temp &= ~FDI_RX_SYMBOL_LOCK;
+ temp &= ~FDI_RX_BIT_LOCK;
+ I915_WRITE(fdi_rx_imr_reg, temp);
+ I915_READ(fdi_rx_imr_reg);
+ udelay(150);
- temp = I915_READ(fdi_rx_iir_reg);
- DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
+ temp = I915_READ(fdi_rx_iir_reg);
+ DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
- if ((temp & FDI_RX_BIT_LOCK) == 0) {
- for (j = 0; j < tries; j++) {
- temp = I915_READ(fdi_rx_iir_reg);
- DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
- if (temp & FDI_RX_BIT_LOCK)
- break;
- udelay(200);
- }
- if (j != tries)
+ if ((temp & FDI_RX_BIT_LOCK) == 0) {
+ for (j = 0; j < tries; j++) {
+ temp = I915_READ(fdi_rx_iir_reg);
+ DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
+ if (temp & FDI_RX_BIT_LOCK)
+ break;
+ udelay(200);
+ }
+ if (j != tries)
+ I915_WRITE(fdi_rx_iir_reg,
+ temp | FDI_RX_BIT_LOCK);
+ else
+ DRM_DEBUG("train 1 fail\n");
+ } else {
I915_WRITE(fdi_rx_iir_reg,
temp | FDI_RX_BIT_LOCK);
- else
- DRM_DEBUG("train 1 fail\n");
- } else {
- I915_WRITE(fdi_rx_iir_reg,
- temp | FDI_RX_BIT_LOCK);
- DRM_DEBUG("train 1 ok 2!\n");
- }
- temp = I915_READ(fdi_tx_reg);
- temp &= ~FDI_LINK_TRAIN_NONE;
- temp |= FDI_LINK_TRAIN_PATTERN_2;
- I915_WRITE(fdi_tx_reg, temp);
-
- temp = I915_READ(fdi_rx_reg);
- temp &= ~FDI_LINK_TRAIN_NONE;
- temp |= FDI_LINK_TRAIN_PATTERN_2;
- I915_WRITE(fdi_rx_reg, temp);
+ DRM_DEBUG("train 1 ok 2!\n");
+ }
+ temp = I915_READ(fdi_tx_reg);
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_PATTERN_2;
+ I915_WRITE(fdi_tx_reg, temp);
+
+ temp = I915_READ(fdi_rx_reg);
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_PATTERN_2;
+ I915_WRITE(fdi_rx_reg, temp);
- udelay(150);
+ udelay(150);
- temp = I915_READ(fdi_rx_iir_reg);
- DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
+ temp = I915_READ(fdi_rx_iir_reg);
+ DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
- if ((temp & FDI_RX_SYMBOL_LOCK) == 0) {
- for (j = 0; j < tries; j++) {
- temp = I915_READ(fdi_rx_iir_reg);
- DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
- if (temp & FDI_RX_SYMBOL_LOCK)
- break;
- udelay(200);
- }
- if (j != tries) {
+ if ((temp & FDI_RX_SYMBOL_LOCK) == 0) {
+ for (j = 0; j < tries; j++) {
+ temp = I915_READ(fdi_rx_iir_reg);
+ DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
+ if (temp & FDI_RX_SYMBOL_LOCK)
+ break;
+ udelay(200);
+ }
+ if (j != tries) {
+ I915_WRITE(fdi_rx_iir_reg,
+ temp | FDI_RX_SYMBOL_LOCK);
+ DRM_DEBUG("train 2 ok 1!\n");
+ } else
+ DRM_DEBUG("train 2 fail\n");
+ } else {
I915_WRITE(fdi_rx_iir_reg,
temp | FDI_RX_SYMBOL_LOCK);
- DRM_DEBUG("train 2 ok 1!\n");
- } else
- DRM_DEBUG("train 2 fail\n");
- } else {
- I915_WRITE(fdi_rx_iir_reg, temp | FDI_RX_SYMBOL_LOCK);
- DRM_DEBUG("train 2 ok 2!\n");
- }
- DRM_DEBUG("train done\n");
+ DRM_DEBUG("train 2 ok 2!\n");
+ }
+ DRM_DEBUG("train done\n");
- /* set transcoder timing */
- I915_WRITE(trans_htot_reg, I915_READ(cpu_htot_reg));
- I915_WRITE(trans_hblank_reg, I915_READ(cpu_hblank_reg));
- I915_WRITE(trans_hsync_reg, I915_READ(cpu_hsync_reg));
+ /* set transcoder timing */
+ I915_WRITE(trans_htot_reg, I915_READ(cpu_htot_reg));
+ I915_WRITE(trans_hblank_reg, I915_READ(cpu_hblank_reg));
+ I915_WRITE(trans_hsync_reg, I915_READ(cpu_hsync_reg));
- I915_WRITE(trans_vtot_reg, I915_READ(cpu_vtot_reg));
- I915_WRITE(trans_vblank_reg, I915_READ(cpu_vblank_reg));
- I915_WRITE(trans_vsync_reg, I915_READ(cpu_vsync_reg));
+ I915_WRITE(trans_vtot_reg, I915_READ(cpu_vtot_reg));
+ I915_WRITE(trans_vblank_reg, I915_READ(cpu_vblank_reg));
+ I915_WRITE(trans_vsync_reg, I915_READ(cpu_vsync_reg));
- /* enable PCH transcoder */
- temp = I915_READ(transconf_reg);
- I915_WRITE(transconf_reg, temp | TRANS_ENABLE);
- I915_READ(transconf_reg);
+ /* enable PCH transcoder */
+ temp = I915_READ(transconf_reg);
+ I915_WRITE(transconf_reg, temp | TRANS_ENABLE);
+ I915_READ(transconf_reg);
- while ((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) == 0)
- ;
+ while ((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) == 0)
+ ;
- /* enable normal */
+ /* enable normal */
- temp = I915_READ(fdi_tx_reg);
- temp &= ~FDI_LINK_TRAIN_NONE;
- I915_WRITE(fdi_tx_reg, temp | FDI_LINK_TRAIN_NONE |
- FDI_TX_ENHANCE_FRAME_ENABLE);
- I915_READ(fdi_tx_reg);
+ temp = I915_READ(fdi_tx_reg);
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ I915_WRITE(fdi_tx_reg, temp | FDI_LINK_TRAIN_NONE |
+ FDI_TX_ENHANCE_FRAME_ENABLE);
+ I915_READ(fdi_tx_reg);
- temp = I915_READ(fdi_rx_reg);
- temp &= ~FDI_LINK_TRAIN_NONE;
- I915_WRITE(fdi_rx_reg, temp | FDI_LINK_TRAIN_NONE |
- FDI_RX_ENHANCE_FRAME_ENABLE);
- I915_READ(fdi_rx_reg);
+ temp = I915_READ(fdi_rx_reg);
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ I915_WRITE(fdi_rx_reg, temp | FDI_LINK_TRAIN_NONE |
+ FDI_RX_ENHANCE_FRAME_ENABLE);
+ I915_READ(fdi_rx_reg);
- /* wait one idle pattern time */
- udelay(100);
+ /* wait one idle pattern time */
+ udelay(100);
+
+ }
intel_crtc_load_lut(crtc);
case DRM_MODE_DPMS_OFF:
DRM_DEBUG("crtc %d dpms off\n", pipe);
- /* Disable the VGA plane that we never use */
- I915_WRITE(CPU_VGACNTRL, VGA_DISP_DISABLE);
+ i915_disable_vga(dev);
/* Disable display plane */
temp = I915_READ(dspcntr_reg);
if ((temp & PIPEACONF_ENABLE) != 0) {
I915_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE);
I915_READ(pipeconf_reg);
+ n = 0;
/* wait for cpu pipe off, pipe state */
- while ((I915_READ(pipeconf_reg) & I965_PIPECONF_ACTIVE) != 0)
- ;
+ while ((I915_READ(pipeconf_reg) & I965_PIPECONF_ACTIVE) != 0) {
+ n++;
+ if (n < 60) {
+ udelay(500);
+ continue;
+ } else {
+ DRM_DEBUG("pipe %d off delay\n", pipe);
+ break;
+ }
+ }
} else
DRM_DEBUG("crtc %d is disabled\n", pipe);
- /* IGDNG-A : disable cpu panel fitter ? */
- temp = I915_READ(pf_ctl_reg);
- if ((temp & PF_ENABLE) != 0) {
- I915_WRITE(pf_ctl_reg, temp & ~PF_ENABLE);
- I915_READ(pf_ctl_reg);
+ if (HAS_eDP) {
+ igdng_disable_pll_edp(crtc);
}
/* disable CPU FDI tx and PCH FDI rx */
I915_WRITE(fdi_rx_reg, temp & ~FDI_RX_ENABLE);
I915_READ(fdi_rx_reg);
+ udelay(100);
+
/* still set train pattern 1 */
temp = I915_READ(fdi_tx_reg);
temp &= ~FDI_LINK_TRAIN_NONE;
temp |= FDI_LINK_TRAIN_PATTERN_1;
I915_WRITE(fdi_rx_reg, temp);
+ udelay(100);
+
/* disable PCH transcoder */
temp = I915_READ(transconf_reg);
if ((temp & TRANS_ENABLE) != 0) {
I915_WRITE(transconf_reg, temp & ~TRANS_ENABLE);
I915_READ(transconf_reg);
+ n = 0;
/* wait for PCH transcoder off, transcoder state */
- while ((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) != 0)
- ;
+ while ((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) != 0) {
+ n++;
+ if (n < 60) {
+ udelay(500);
+ continue;
+ } else {
+ DRM_DEBUG("transcoder %d off delay\n", pipe);
+ break;
+ }
+ }
}
/* disable PCH DPLL */
I915_READ(fdi_rx_reg);
}
+ /* Disable CPU FDI TX PLL */
+ temp = I915_READ(fdi_tx_reg);
+ if ((temp & FDI_TX_PLL_ENABLE) != 0) {
+ I915_WRITE(fdi_tx_reg, temp & ~FDI_TX_PLL_ENABLE);
+ I915_READ(fdi_tx_reg);
+ udelay(100);
+ }
+
+ /* Disable PF */
+ temp = I915_READ(pf_ctl_reg);
+ if ((temp & PF_ENABLE) != 0) {
+ I915_WRITE(pf_ctl_reg, temp & ~PF_ENABLE);
+ I915_READ(pf_ctl_reg);
+ }
+ I915_WRITE(pf_win_size, 0);
+
/* Wait for the clocks to turn off. */
udelay(150);
break;
//intel_crtc_dpms_video(crtc, FALSE); TODO
/* Disable the VGA plane that we never use */
- I915_WRITE(VGACNTRL, VGA_DISP_DISABLE);
+ i915_disable_vga(dev);
/* Disable display plane */
temp = I915_READ(dspcntr_reg);
IGD_FIFO_LINE_SIZE
};
static struct intel_watermark_params i945_wm_info = {
- I915_FIFO_LINE_SIZE,
+ I945_FIFO_SIZE,
I915_MAX_WM,
1,
- 0,
- IGD_FIFO_LINE_SIZE
+ 2,
+ I915_FIFO_LINE_SIZE
};
static struct intel_watermark_params i915_wm_info = {
- I945_FIFO_SIZE,
+ I915_FIFO_SIZE,
I915_MAX_WM,
1,
- 0,
+ 2,
I915_FIFO_LINE_SIZE
};
static struct intel_watermark_params i855_wm_info = {
I855GM_FIFO_SIZE,
I915_MAX_WM,
1,
- 0,
+ 2,
I830_FIFO_LINE_SIZE
};
static struct intel_watermark_params i830_wm_info = {
I830_FIFO_SIZE,
I915_MAX_WM,
1,
- 0,
+ 2,
I830_FIFO_LINE_SIZE
};
+/**
+ * intel_calculate_wm - calculate watermark level
+ * @clock_in_khz: pixel clock
+ * @wm: chip FIFO params
+ * @pixel_size: display pixel size
+ * @latency_ns: memory latency for the platform
+ *
+ * Calculate the watermark level (the level at which the display plane will
+ * start fetching from memory again). Each chip has a different display
+ * FIFO size and allocation, so the caller needs to figure that out and pass
+ * in the correct intel_watermark_params structure.
+ *
+ * As the pixel clock runs, the FIFO will be drained at a rate that depends
+ * on the pixel size. When it reaches the watermark level, it'll start
+ * fetching FIFO line sized based chunks from memory until the FIFO fills
+ * past the watermark point. If the FIFO drains completely, a FIFO underrun
+ * will occur, and a display engine hang could result.
+ */
static unsigned long intel_calculate_wm(unsigned long clock_in_khz,
struct intel_watermark_params *wm,
int pixel_size,
unsigned long latency_ns)
{
- unsigned long bytes_required, wm_size;
+ long entries_required, wm_size;
+
+ entries_required = (clock_in_khz * pixel_size * latency_ns) / 1000000;
+ entries_required /= wm->cacheline_size;
+
+ DRM_DEBUG("FIFO entries required for mode: %d\n", entries_required);
- bytes_required = (clock_in_khz * pixel_size * latency_ns) / 1000000;
- bytes_required /= wm->cacheline_size;
- wm_size = wm->fifo_size - bytes_required - wm->guard_size;
+ wm_size = wm->fifo_size - (entries_required + wm->guard_size);
- if (wm_size > wm->max_wm)
+ DRM_DEBUG("FIFO watermark level: %d\n", wm_size);
+
+ /* Don't promote wm_size to unsigned... */
+ if (wm_size > (long)wm->max_wm)
wm_size = wm->max_wm;
- if (wm_size == 0)
+ if (wm_size <= 0)
wm_size = wm->default_wm;
return wm_size;
}
return;
}
-const static int latency_ns = 5000; /* default for non-igd platforms */
+/*
+ * Latency for FIFO fetches is dependent on several factors:
+ * - memory configuration (speed, channels)
+ * - chipset
+ * - current MCH state
+ * It can be fairly high in some situations, so here we assume a fairly
+ * pessimal value. It's a tradeoff between extra memory fetches (if we
+ * set this value too high, the FIFO will fetch frequently to stay full)
+ * and power consumption (set it too low to save power and we might see
+ * FIFO underruns and display "flicker").
+ *
+ * A value of 5us seems to be a good balance; safe for very low end
+ * platforms but not overly aggressive on lower latency configs.
+ */
+const static int latency_ns = 5000;
+static int intel_get_fifo_size(struct drm_device *dev, int plane)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t dsparb = I915_READ(DSPARB);
+ int size;
+
+ if (IS_I9XX(dev)) {
+ if (plane == 0)
+ size = dsparb & 0x7f;
+ else
+ size = ((dsparb >> DSPARB_CSTART_SHIFT) & 0x7f) -
+ (dsparb & 0x7f);
+ } else if (IS_I85X(dev)) {
+ if (plane == 0)
+ size = dsparb & 0x1ff;
+ else
+ size = ((dsparb >> DSPARB_BEND_SHIFT) & 0x1ff) -
+ (dsparb & 0x1ff);
+ size >>= 1; /* Convert to cachelines */
+ } else if (IS_845G(dev)) {
+ size = dsparb & 0x7f;
+ size >>= 2; /* Convert to cachelines */
+ } else {
+ size = dsparb & 0x7f;
+ size >>= 1; /* Convert to cachelines */
+ }
+
+ DRM_DEBUG("FIFO size - (0x%08x) %s: %d\n", dsparb, plane ? "B" : "A",
+ size);
+
+ return size;
+}
static void i965_update_wm(struct drm_device *dev)
{
int planeb_clock, int sr_hdisplay, int pixel_size)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- uint32_t fwater_lo = I915_READ(FW_BLC) & MM_FIFO_WATERMARK;
- uint32_t fwater_hi = I915_READ(FW_BLC2) & LM_FIFO_WATERMARK;
- int bsize, asize, cwm, bwm = 1, awm = 1, srwm = 1;
- uint32_t dsparb = I915_READ(DSPARB);
- int planea_entries, planeb_entries;
- struct intel_watermark_params *wm_params;
+ uint32_t fwater_lo;
+ uint32_t fwater_hi;
+ int total_size, cacheline_size, cwm, srwm = 1;
+ int planea_wm, planeb_wm;
+ struct intel_watermark_params planea_params, planeb_params;
unsigned long line_time_us;
int sr_clock, sr_entries = 0;
+ /* Create copies of the base settings for each pipe */
if (IS_I965GM(dev) || IS_I945GM(dev))
- wm_params = &i945_wm_info;
+ planea_params = planeb_params = i945_wm_info;
else if (IS_I9XX(dev))
- wm_params = &i915_wm_info;
+ planea_params = planeb_params = i915_wm_info;
else
- wm_params = &i855_wm_info;
+ planea_params = planeb_params = i855_wm_info;
- planea_entries = intel_calculate_wm(planea_clock, wm_params,
- pixel_size, latency_ns);
- planeb_entries = intel_calculate_wm(planeb_clock, wm_params,
- pixel_size, latency_ns);
+ /* Grab a couple of global values before we overwrite them */
+ total_size = planea_params.fifo_size;
+ cacheline_size = planea_params.cacheline_size;
- DRM_DEBUG("FIFO entries - A: %d, B: %d\n", planea_entries,
- planeb_entries);
+ /* Update per-plane FIFO sizes */
+ planea_params.fifo_size = intel_get_fifo_size(dev, 0);
+ planeb_params.fifo_size = intel_get_fifo_size(dev, 1);
- if (IS_I9XX(dev)) {
- asize = dsparb & 0x7f;
- bsize = (dsparb >> DSPARB_CSTART_SHIFT) & 0x7f;
- } else {
- asize = dsparb & 0x1ff;
- bsize = (dsparb >> DSPARB_BEND_SHIFT) & 0x1ff;
- }
- DRM_DEBUG("FIFO size - A: %d, B: %d\n", asize, bsize);
-
- /* Two extra entries for padding */
- awm = asize - (planea_entries + 2);
- bwm = bsize - (planeb_entries + 2);
-
- /* Sanity check against potentially bad FIFO allocations */
- if (awm <= 0) {
- /* pipe is on but has too few FIFO entries */
- if (planea_entries != 0)
- DRM_DEBUG("plane A needs more FIFO entries\n");
- awm = 1;
- }
- if (bwm <= 0) {
- if (planeb_entries != 0)
- DRM_DEBUG("plane B needs more FIFO entries\n");
- bwm = 1;
- }
+ planea_wm = intel_calculate_wm(planea_clock, &planea_params,
+ pixel_size, latency_ns);
+ planeb_wm = intel_calculate_wm(planeb_clock, &planeb_params,
+ pixel_size, latency_ns);
+ DRM_DEBUG("FIFO watermarks - A: %d, B: %d\n", planea_wm, planeb_wm);
/*
* Overlay gets an aggressive default since video jitter is bad.
*/
cwm = 2;
- /* Calc sr entries for one pipe configs */
- if (!planea_clock || !planeb_clock) {
+ /* Calc sr entries for one plane configs */
+ if (sr_hdisplay && (!planea_clock || !planeb_clock)) {
+ /* self-refresh has much higher latency */
+ const static int sr_latency_ns = 6000;
+
sr_clock = planea_clock ? planea_clock : planeb_clock;
- line_time_us = (sr_hdisplay * 1000) / sr_clock;
- sr_entries = (((latency_ns / line_time_us) + 1) * pixel_size *
- sr_hdisplay) / 1000;
- sr_entries = roundup(sr_entries / wm_params->cacheline_size, 1);
- if (sr_entries < wm_params->fifo_size)
- srwm = wm_params->fifo_size - sr_entries;
+ line_time_us = ((sr_hdisplay * 1000) / sr_clock);
+
+ /* Use ns/us then divide to preserve precision */
+ sr_entries = (((sr_latency_ns / line_time_us) + 1) *
+ pixel_size * sr_hdisplay) / 1000;
+ sr_entries = roundup(sr_entries / cacheline_size, 1);
+ DRM_DEBUG("self-refresh entries: %d\n", sr_entries);
+ srwm = total_size - sr_entries;
+ if (srwm < 0)
+ srwm = 1;
+ if (IS_I9XX(dev))
+ I915_WRITE(FW_BLC_SELF, (srwm & 0x3f));
}
DRM_DEBUG("Setting FIFO watermarks - A: %d, B: %d, C: %d, SR %d\n",
- awm, bwm, cwm, srwm);
+ planea_wm, planeb_wm, cwm, srwm);
+
+ fwater_lo = ((planeb_wm & 0x3f) << 16) | (planea_wm & 0x3f);
+ fwater_hi = (cwm & 0x1f);
- fwater_lo = fwater_lo | ((bwm & 0x3f) << 16) | (awm & 0x3f);
- fwater_hi = fwater_hi | (cwm & 0x1f);
+ /* Set request length to 8 cachelines per fetch */
+ fwater_lo = fwater_lo | (1 << 24) | (1 << 8);
+ fwater_hi = fwater_hi | (1 << 8);
I915_WRITE(FW_BLC, fwater_lo);
I915_WRITE(FW_BLC2, fwater_hi);
- if (IS_I9XX(dev))
- I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN | (srwm & 0x3f));
}
static void i830_update_wm(struct drm_device *dev, int planea_clock,
int pixel_size)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- uint32_t dsparb = I915_READ(DSPARB);
- uint32_t fwater_lo = I915_READ(FW_BLC) & MM_FIFO_WATERMARK;
- unsigned int asize, awm;
- int planea_entries;
+ uint32_t fwater_lo = I915_READ(FW_BLC) & ~0xfff;
+ int planea_wm;
- planea_entries = intel_calculate_wm(planea_clock, &i830_wm_info,
- pixel_size, latency_ns);
+ i830_wm_info.fifo_size = intel_get_fifo_size(dev, 0);
- asize = dsparb & 0x7f;
+ planea_wm = intel_calculate_wm(planea_clock, &i830_wm_info,
+ pixel_size, latency_ns);
+ fwater_lo |= (3<<8) | planea_wm;
- awm = asize - planea_entries;
-
- fwater_lo = fwater_lo | awm;
+ DRM_DEBUG("Setting FIFO watermarks - A: %d\n", planea_wm);
I915_WRITE(FW_BLC, fwater_lo);
}
if (enabled <= 0)
return;
- /* Single pipe configs can enable self refresh */
+ /* Single plane configs can enable self refresh */
if (enabled == 1 && IS_IGD(dev))
igd_enable_cxsr(dev, sr_clock, pixel_size);
else if (IS_IGD(dev))
u32 dpll = 0, fp = 0, dspcntr, pipeconf;
bool ok, is_sdvo = false, is_dvo = false;
bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false;
+ bool is_edp = false;
struct drm_mode_config *mode_config = &dev->mode_config;
struct drm_connector *connector;
const intel_limit_t *limit;
int lvds_reg = LVDS;
u32 temp;
int sdvo_pixel_multiply;
+ int target_clock;
drm_vblank_pre_modeset(dev, pipe);
case INTEL_OUTPUT_DISPLAYPORT:
is_dp = true;
break;
+ case INTEL_OUTPUT_EDP:
+ is_edp = true;
+ break;
}
num_outputs++;
}
/* FDI link */
- if (IS_IGDNG(dev))
- igdng_compute_m_n(3, 4, /* lane num 4 */
- adjusted_mode->clock,
- 270000, /* lane clock */
- &m_n);
+ if (IS_IGDNG(dev)) {
+ int lane, link_bw;
+ /* eDP doesn't require FDI link, so just set DP M/N
+ according to current link config */
+ if (is_edp) {
+ struct drm_connector *edp;
+ target_clock = mode->clock;
+ edp = intel_pipe_get_output(crtc);
+ intel_edp_link_config(to_intel_output(edp),
+ &lane, &link_bw);
+ } else {
+ /* DP over FDI requires target mode clock
+ instead of link clock */
+ if (is_dp)
+ target_clock = mode->clock;
+ else
+ target_clock = adjusted_mode->clock;
+ lane = 4;
+ link_bw = 270000;
+ }
+ igdng_compute_m_n(3, lane, target_clock,
+ link_bw, &m_n);
+ }
if (IS_IGD(dev))
fp = (1 << clock.n) << 16 | clock.m1 << 8 | clock.m2;
if (is_sdvo) {
dpll |= DPLL_DVO_HIGH_SPEED;
sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
- if (IS_I945G(dev) || IS_I945GM(dev))
+ if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
dpll |= (sdvo_pixel_multiply - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
else if (IS_IGDNG(dev))
dpll |= (sdvo_pixel_multiply - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
dpll_reg = pch_dpll_reg;
}
- if (dpll & DPLL_VCO_ENABLE) {
+ if (is_edp) {
+ igdng_disable_pll_edp(crtc);
+ } else if ((dpll & DPLL_VCO_ENABLE)) {
I915_WRITE(fp_reg, fp);
I915_WRITE(dpll_reg, dpll & ~DPLL_VCO_ENABLE);
I915_READ(dpll_reg);
udelay(150);
}
- if (IS_IGDNG(dev)) {
- /* enable PCH clock reference source */
- /* XXX need to change the setting for other outputs */
- u32 temp;
- temp = I915_READ(PCH_DREF_CONTROL);
- temp &= ~DREF_NONSPREAD_SOURCE_MASK;
- temp |= DREF_NONSPREAD_CK505_ENABLE;
- temp &= ~DREF_SSC_SOURCE_MASK;
- temp |= DREF_SSC_SOURCE_ENABLE;
- temp &= ~DREF_SSC1_ENABLE;
- /* if no eDP, disable source output to CPU */
- temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
- temp |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
- I915_WRITE(PCH_DREF_CONTROL, temp);
- }
-
/* The LVDS pin pair needs to be on before the DPLLs are enabled.
* This is an exception to the general rule that mode_set doesn't turn
* things on.
if (is_dp)
intel_dp_set_m_n(crtc, mode, adjusted_mode);
- I915_WRITE(fp_reg, fp);
- I915_WRITE(dpll_reg, dpll);
- I915_READ(dpll_reg);
- /* Wait for the clocks to stabilize. */
- udelay(150);
-
- if (IS_I965G(dev) && !IS_IGDNG(dev)) {
- sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
- I915_WRITE(dpll_md_reg, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) |
- ((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT));
- } else {
- /* write it again -- the BIOS does, after all */
+ if (!is_edp) {
+ I915_WRITE(fp_reg, fp);
I915_WRITE(dpll_reg, dpll);
+ I915_READ(dpll_reg);
+ /* Wait for the clocks to stabilize. */
+ udelay(150);
+
+ if (IS_I965G(dev) && !IS_IGDNG(dev)) {
+ sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
+ I915_WRITE(dpll_md_reg, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) |
+ ((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT));
+ } else {
+ /* write it again -- the BIOS does, after all */
+ I915_WRITE(dpll_reg, dpll);
+ }
+ I915_READ(dpll_reg);
+ /* Wait for the clocks to stabilize. */
+ udelay(150);
}
- I915_READ(dpll_reg);
- /* Wait for the clocks to stabilize. */
- udelay(150);
I915_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) |
((adjusted_mode->crtc_htotal - 1) << 16));
I915_WRITE(link_m1_reg, m_n.link_m);
I915_WRITE(link_n1_reg, m_n.link_n);
- /* enable FDI RX PLL too */
- temp = I915_READ(fdi_rx_reg);
- I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE);
- udelay(200);
+ if (is_edp) {
+ igdng_set_pll_edp(crtc, adjusted_mode->clock);
+ } else {
+ /* enable FDI RX PLL too */
+ temp = I915_READ(fdi_rx_reg);
+ I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE);
+ udelay(200);
+ }
}
I915_WRITE(pipeconf_reg, pipeconf);
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
struct intel_output *intel_output = to_intel_output(connector);
- if (type_mask & (1 << intel_output->type))
+ if (type_mask & intel_output->clone_mask)
index_mask |= (1 << entry);
entry++;
}
if (IS_IGDNG(dev)) {
int found;
+ if (IS_MOBILE(dev) && (I915_READ(DP_A) & DP_DETECTED))
+ intel_dp_init(dev, DP_A);
+
if (I915_READ(HDMIB) & PORT_DETECTED) {
/* check SDVOB */
/* found = intel_sdvo_init(dev, HDMIB); */
found = 0;
if (!found)
intel_hdmi_init(dev, HDMIB);
+ if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED))
+ intel_dp_init(dev, PCH_DP_B);
}
if (I915_READ(HDMIC) & PORT_DETECTED)
if (I915_READ(HDMID) & PORT_DETECTED)
intel_hdmi_init(dev, HDMID);
+ if (I915_READ(PCH_DP_C) & DP_DETECTED)
+ intel_dp_init(dev, PCH_DP_C);
+
+ if (I915_READ(PCH_DP_D) & DP_DETECTED)
+ intel_dp_init(dev, PCH_DP_D);
+
} else if (IS_I9XX(dev)) {
- int found;
- u32 reg;
+ bool found = false;
if (I915_READ(SDVOB) & SDVO_DETECTED) {
found = intel_sdvo_init(dev, SDVOB);
if (!found && SUPPORTS_INTEGRATED_HDMI(dev))
intel_hdmi_init(dev, SDVOB);
+
if (!found && SUPPORTS_INTEGRATED_DP(dev))
intel_dp_init(dev, DP_B);
}
/* Before G4X SDVOC doesn't have its own detect register */
- if (IS_G4X(dev))
- reg = SDVOC;
- else
- reg = SDVOB;
- if (I915_READ(reg) & SDVO_DETECTED) {
+ if (I915_READ(SDVOB) & SDVO_DETECTED)
found = intel_sdvo_init(dev, SDVOC);
- if (!found && SUPPORTS_INTEGRATED_HDMI(dev))
+
+ if (!found && (I915_READ(SDVOC) & SDVO_DETECTED)) {
+
+ if (SUPPORTS_INTEGRATED_HDMI(dev))
intel_hdmi_init(dev, SDVOC);
- if (!found && SUPPORTS_INTEGRATED_DP(dev))
+ if (SUPPORTS_INTEGRATED_DP(dev))
intel_dp_init(dev, DP_C);
}
+
if (SUPPORTS_INTEGRATED_DP(dev) && (I915_READ(DP_D) & DP_DETECTED))
intel_dp_init(dev, DP_D);
} else
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
struct intel_output *intel_output = to_intel_output(connector);
struct drm_encoder *encoder = &intel_output->enc;
- int crtc_mask = 0, clone_mask = 0;
- /* valid crtcs */
- switch(intel_output->type) {
- case INTEL_OUTPUT_HDMI:
- crtc_mask = ((1 << 0)|
- (1 << 1));
- clone_mask = ((1 << INTEL_OUTPUT_HDMI));
- break;
- case INTEL_OUTPUT_DVO:
- case INTEL_OUTPUT_SDVO:
- crtc_mask = ((1 << 0)|
- (1 << 1));
- clone_mask = ((1 << INTEL_OUTPUT_ANALOG) |
- (1 << INTEL_OUTPUT_DVO) |
- (1 << INTEL_OUTPUT_SDVO));
- break;
- case INTEL_OUTPUT_ANALOG:
- crtc_mask = ((1 << 0)|
- (1 << 1));
- clone_mask = ((1 << INTEL_OUTPUT_ANALOG) |
- (1 << INTEL_OUTPUT_DVO) |
- (1 << INTEL_OUTPUT_SDVO));
- break;
- case INTEL_OUTPUT_LVDS:
- crtc_mask = (1 << 1);
- clone_mask = (1 << INTEL_OUTPUT_LVDS);
- break;
- case INTEL_OUTPUT_TVOUT:
- crtc_mask = ((1 << 0) |
- (1 << 1));
- clone_mask = (1 << INTEL_OUTPUT_TVOUT);
- break;
- case INTEL_OUTPUT_DISPLAYPORT:
- crtc_mask = ((1 << 0) |
- (1 << 1));
- clone_mask = (1 << INTEL_OUTPUT_DISPLAYPORT);
- break;
- }
- encoder->possible_crtcs = crtc_mask;
- encoder->possible_clones = intel_connector_clones(dev, clone_mask);
+ encoder->possible_crtcs = intel_output->crtc_mask;
+ encoder->possible_clones = intel_connector_clones(dev,
+ intel_output->clone_mask);
}
}
if (IS_I965G(dev)) {
dev->mode_config.max_width = 8192;
dev->mode_config.max_height = 8192;
+ } else if (IS_I9XX(dev)) {
+ dev->mode_config.max_width = 4096;
+ dev->mode_config.max_height = 4096;
} else {
dev->mode_config.max_width = 2048;
dev->mode_config.max_height = 2048;
#define DP_LINK_CONFIGURATION_SIZE 9
+#define IS_eDP(i) ((i)->type == INTEL_OUTPUT_EDP)
+
struct intel_dp_priv {
uint32_t output_reg;
uint32_t DP;
static void
intel_dp_link_down(struct intel_output *intel_output, uint32_t DP);
+void
+intel_edp_link_config (struct intel_output *intel_output,
+ int *lane_num, int *link_bw)
+{
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+
+ *lane_num = dp_priv->lane_count;
+ if (dp_priv->link_bw == DP_LINK_BW_1_62)
+ *link_bw = 162000;
+ else if (dp_priv->link_bw == DP_LINK_BW_2_7)
+ *link_bw = 270000;
+}
+
static int
intel_dp_max_lane_count(struct intel_output *intel_output)
{
* and would like to run at 2MHz. So, take the
* hrawclk value and divide by 2 and use that
*/
- aux_clock_divider = intel_hrawclk(dev) / 2;
+ if (IS_eDP(intel_output))
+ aux_clock_divider = 225; /* eDP input clock at 450Mhz */
+ else if (IS_IGDNG(dev))
+ aux_clock_divider = 62; /* IGDNG: input clock fixed at 125Mhz */
+ else
+ aux_clock_divider = intel_hrawclk(dev) / 2;
+
/* Must try at least 3 times according to DP spec */
for (try = 0; try < 5; try++) {
/* Load the send data into the aux channel data registers */
}
/* Clear done status and any errors */
- I915_WRITE(ch_ctl, (ctl |
+ I915_WRITE(ch_ctl, (status |
DP_AUX_CH_CTL_DONE |
DP_AUX_CH_CTL_TIME_OUT_ERROR |
DP_AUX_CH_CTL_RECEIVE_ERROR));
return -1;
msg[0] = AUX_NATIVE_WRITE << 4;
msg[1] = address >> 8;
- msg[2] = address;
+ msg[2] = address & 0xff;
msg[3] = send_bytes - 1;
memcpy(&msg[4], send, send_bytes);
msg_bytes = send_bytes + 4;
memset(&dp_priv->adapter, '\0', sizeof (dp_priv->adapter));
dp_priv->adapter.owner = THIS_MODULE;
dp_priv->adapter.class = I2C_CLASS_DDC;
- strncpy (dp_priv->adapter.name, name, sizeof dp_priv->adapter.name - 1);
- dp_priv->adapter.name[sizeof dp_priv->adapter.name - 1] = '\0';
+ strncpy (dp_priv->adapter.name, name, sizeof(dp_priv->adapter.name) - 1);
+ dp_priv->adapter.name[sizeof(dp_priv->adapter.name) - 1] = '\0';
dp_priv->adapter.algo_data = &dp_priv->algo;
dp_priv->adapter.dev.parent = &intel_output->base.kdev;
intel_dp_compute_m_n(3, lane_count,
mode->clock, adjusted_mode->clock, &m_n);
- if (intel_crtc->pipe == 0) {
- I915_WRITE(PIPEA_GMCH_DATA_M,
- ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
- m_n.gmch_m);
- I915_WRITE(PIPEA_GMCH_DATA_N,
- m_n.gmch_n);
- I915_WRITE(PIPEA_DP_LINK_M, m_n.link_m);
- I915_WRITE(PIPEA_DP_LINK_N, m_n.link_n);
+ if (IS_IGDNG(dev)) {
+ if (intel_crtc->pipe == 0) {
+ I915_WRITE(TRANSA_DATA_M1,
+ ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
+ m_n.gmch_m);
+ I915_WRITE(TRANSA_DATA_N1, m_n.gmch_n);
+ I915_WRITE(TRANSA_DP_LINK_M1, m_n.link_m);
+ I915_WRITE(TRANSA_DP_LINK_N1, m_n.link_n);
+ } else {
+ I915_WRITE(TRANSB_DATA_M1,
+ ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
+ m_n.gmch_m);
+ I915_WRITE(TRANSB_DATA_N1, m_n.gmch_n);
+ I915_WRITE(TRANSB_DP_LINK_M1, m_n.link_m);
+ I915_WRITE(TRANSB_DP_LINK_N1, m_n.link_n);
+ }
} else {
- I915_WRITE(PIPEB_GMCH_DATA_M,
- ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
- m_n.gmch_m);
- I915_WRITE(PIPEB_GMCH_DATA_N,
- m_n.gmch_n);
- I915_WRITE(PIPEB_DP_LINK_M, m_n.link_m);
- I915_WRITE(PIPEB_DP_LINK_N, m_n.link_n);
+ if (intel_crtc->pipe == 0) {
+ I915_WRITE(PIPEA_GMCH_DATA_M,
+ ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
+ m_n.gmch_m);
+ I915_WRITE(PIPEA_GMCH_DATA_N,
+ m_n.gmch_n);
+ I915_WRITE(PIPEA_DP_LINK_M, m_n.link_m);
+ I915_WRITE(PIPEA_DP_LINK_N, m_n.link_n);
+ } else {
+ I915_WRITE(PIPEB_GMCH_DATA_M,
+ ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
+ m_n.gmch_m);
+ I915_WRITE(PIPEB_GMCH_DATA_N,
+ m_n.gmch_n);
+ I915_WRITE(PIPEB_DP_LINK_M, m_n.link_m);
+ I915_WRITE(PIPEB_DP_LINK_N, m_n.link_n);
+ }
}
}
if (intel_crtc->pipe == 1)
dp_priv->DP |= DP_PIPEB_SELECT;
+
+ if (IS_eDP(intel_output)) {
+ /* don't miss out required setting for eDP */
+ dp_priv->DP |= DP_PLL_ENABLE;
+ if (adjusted_mode->clock < 200000)
+ dp_priv->DP |= DP_PLL_FREQ_160MHZ;
+ else
+ dp_priv->DP |= DP_PLL_FREQ_270MHZ;
+ }
}
+static void igdng_edp_backlight_on (struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 pp;
+
+ DRM_DEBUG("\n");
+ pp = I915_READ(PCH_PP_CONTROL);
+ pp |= EDP_BLC_ENABLE;
+ I915_WRITE(PCH_PP_CONTROL, pp);
+}
+
+static void igdng_edp_backlight_off (struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 pp;
+
+ DRM_DEBUG("\n");
+ pp = I915_READ(PCH_PP_CONTROL);
+ pp &= ~EDP_BLC_ENABLE;
+ I915_WRITE(PCH_PP_CONTROL, pp);
+}
static void
intel_dp_dpms(struct drm_encoder *encoder, int mode)
uint32_t dp_reg = I915_READ(dp_priv->output_reg);
if (mode != DRM_MODE_DPMS_ON) {
- if (dp_reg & DP_PORT_EN)
+ if (dp_reg & DP_PORT_EN) {
intel_dp_link_down(intel_output, dp_priv->DP);
+ if (IS_eDP(intel_output))
+ igdng_edp_backlight_off(dev);
+ }
} else {
- if (!(dp_reg & DP_PORT_EN))
+ if (!(dp_reg & DP_PORT_EN)) {
intel_dp_link_train(intel_output, dp_priv->DP, dp_priv->link_configuration);
+ if (IS_eDP(intel_output))
+ igdng_edp_backlight_on(dev);
+ }
}
dp_priv->dpms_mode = mode;
}
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ DRM_DEBUG("\n");
+
+ if (IS_eDP(intel_output)) {
+ DP &= ~DP_PLL_ENABLE;
+ I915_WRITE(dp_priv->output_reg, DP);
+ POSTING_READ(dp_priv->output_reg);
+ udelay(100);
+ }
+
+ DP &= ~DP_LINK_TRAIN_MASK;
+ I915_WRITE(dp_priv->output_reg, DP | DP_LINK_TRAIN_PAT_IDLE);
+ POSTING_READ(dp_priv->output_reg);
+
+ udelay(17000);
+
+ if (IS_eDP(intel_output))
+ DP |= DP_LINK_TRAIN_OFF;
I915_WRITE(dp_priv->output_reg, DP & ~DP_PORT_EN);
POSTING_READ(dp_priv->output_reg);
}
intel_dp_link_train(intel_output, dp_priv->DP, dp_priv->link_configuration);
}
+static enum drm_connector_status
+igdng_dp_detect(struct drm_connector *connector)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ enum drm_connector_status status;
+
+ status = connector_status_disconnected;
+ if (intel_dp_aux_native_read(intel_output,
+ 0x000, dp_priv->dpcd,
+ sizeof (dp_priv->dpcd)) == sizeof (dp_priv->dpcd))
+ {
+ if (dp_priv->dpcd[0] != 0)
+ status = connector_status_connected;
+ }
+ return status;
+}
+
/**
* Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect DP connection.
*
dp_priv->has_audio = false;
+ if (IS_IGDNG(dev))
+ return igdng_dp_detect(connector);
+
temp = I915_READ(PORT_HOTPLUG_EN);
I915_WRITE(PORT_HOTPLUG_EN,
static int intel_dp_get_modes(struct drm_connector *connector)
{
struct intel_output *intel_output = to_intel_output(connector);
+ struct drm_device *dev = intel_output->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int ret;
/* We should parse the EDID data and find out if it has an audio sink
*/
- return intel_ddc_get_modes(intel_output);
+ ret = intel_ddc_get_modes(intel_output);
+ if (ret)
+ return ret;
+
+ /* if eDP has no EDID, try to use fixed panel mode from VBT */
+ if (IS_eDP(intel_output)) {
+ if (dev_priv->panel_fixed_mode != NULL) {
+ struct drm_display_mode *mode;
+ mode = drm_mode_duplicate(dev, dev_priv->panel_fixed_mode);
+ drm_mode_probed_add(connector, mode);
+ return 1;
+ }
+ }
+ return 0;
}
static void
struct drm_connector *connector;
struct intel_output *intel_output;
struct intel_dp_priv *dp_priv;
+ const char *name = NULL;
intel_output = kcalloc(sizeof(struct intel_output) +
sizeof(struct intel_dp_priv), 1, GFP_KERNEL);
DRM_MODE_CONNECTOR_DisplayPort);
drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs);
- intel_output->type = INTEL_OUTPUT_DISPLAYPORT;
-
+ if (output_reg == DP_A)
+ intel_output->type = INTEL_OUTPUT_EDP;
+ else
+ intel_output->type = INTEL_OUTPUT_DISPLAYPORT;
+
+ if (output_reg == DP_B)
+ intel_output->clone_mask = (1 << INTEL_DP_B_CLONE_BIT);
+ else if (output_reg == DP_C)
+ intel_output->clone_mask = (1 << INTEL_DP_C_CLONE_BIT);
+ else if (output_reg == DP_D)
+ intel_output->clone_mask = (1 << INTEL_DP_D_CLONE_BIT);
+
+ if (IS_eDP(intel_output)) {
+ intel_output->crtc_mask = (1 << 1);
+ intel_output->clone_mask = (1 << INTEL_EDP_CLONE_BIT);
+ } else
+ intel_output->crtc_mask = (1 << 0) | (1 << 1);
connector->interlace_allowed = true;
connector->doublescan_allowed = 0;
drm_sysfs_connector_add(connector);
/* Set up the DDC bus. */
- intel_dp_i2c_init(intel_output,
- (output_reg == DP_B) ? "DPDDC-B" :
- (output_reg == DP_C) ? "DPDDC-C" : "DPDDC-D");
+ switch (output_reg) {
+ case DP_A:
+ name = "DPDDC-A";
+ break;
+ case DP_B:
+ case PCH_DP_B:
+ name = "DPDDC-B";
+ break;
+ case DP_C:
+ case PCH_DP_C:
+ name = "DPDDC-C";
+ break;
+ case DP_D:
+ case PCH_DP_D:
+ name = "DPDDC-D";
+ break;
+ }
+
+ intel_dp_i2c_init(intel_output, name);
+
intel_output->ddc_bus = &dp_priv->adapter;
intel_output->hot_plug = intel_dp_hot_plug;
+ if (output_reg == DP_A) {
+ /* initialize panel mode from VBT if available for eDP */
+ if (dev_priv->lfp_lvds_vbt_mode) {
+ dev_priv->panel_fixed_mode =
+ drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode);
+ if (dev_priv->panel_fixed_mode) {
+ dev_priv->panel_fixed_mode->type |=
+ DRM_MODE_TYPE_PREFERRED;
+ }
+ }
+ }
+
/* For G4X desktop chip, PEG_BAND_GAP_DATA 3:0 must first be written
* 0xd. Failure to do so will result in spurious interrupts being
* generated on the port when a cable is not attached.
#define INTEL_OUTPUT_TVOUT 5
#define INTEL_OUTPUT_HDMI 6
#define INTEL_OUTPUT_DISPLAYPORT 7
+#define INTEL_OUTPUT_EDP 8
+
+/* Intel Pipe Clone Bit */
+#define INTEL_HDMIB_CLONE_BIT 1
+#define INTEL_HDMIC_CLONE_BIT 2
+#define INTEL_HDMID_CLONE_BIT 3
+#define INTEL_HDMIE_CLONE_BIT 4
+#define INTEL_HDMIF_CLONE_BIT 5
+#define INTEL_SDVO_NON_TV_CLONE_BIT 6
+#define INTEL_SDVO_TV_CLONE_BIT 7
+#define INTEL_SDVO_LVDS_CLONE_BIT 8
+#define INTEL_ANALOG_CLONE_BIT 9
+#define INTEL_TV_CLONE_BIT 10
+#define INTEL_DP_B_CLONE_BIT 11
+#define INTEL_DP_C_CLONE_BIT 12
+#define INTEL_DP_D_CLONE_BIT 13
+#define INTEL_LVDS_CLONE_BIT 14
+#define INTEL_DVO_TMDS_CLONE_BIT 15
+#define INTEL_DVO_LVDS_CLONE_BIT 16
+#define INTEL_EDP_CLONE_BIT 17
#define INTEL_DVO_CHIP_NONE 0
#define INTEL_DVO_CHIP_LVDS 1
bool needs_tv_clock;
void *dev_priv;
void (*hot_plug)(struct intel_output *);
+ int crtc_mask;
+ int clone_mask;
};
struct intel_crtc {
void
intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode);
+extern void intel_edp_link_config (struct intel_output *, int *, int *);
+
extern void intel_crtc_load_lut(struct drm_crtc *crtc);
extern void intel_encoder_prepare (struct drm_encoder *encoder);
continue;
intel_output->type = INTEL_OUTPUT_DVO;
+ intel_output->crtc_mask = (1 << 0) | (1 << 1);
switch (dvo->type) {
case INTEL_DVO_CHIP_TMDS:
+ intel_output->clone_mask =
+ (1 << INTEL_DVO_TMDS_CLONE_BIT) |
+ (1 << INTEL_ANALOG_CLONE_BIT);
drm_connector_init(dev, connector,
&intel_dvo_connector_funcs,
DRM_MODE_CONNECTOR_DVII);
encoder_type = DRM_MODE_ENCODER_TMDS;
break;
case INTEL_DVO_CHIP_LVDS:
+ intel_output->clone_mask =
+ (1 << INTEL_DVO_LVDS_CLONE_BIT);
drm_connector_init(dev, connector,
&intel_dvo_connector_funcs,
DRM_MODE_CONNECTOR_LVDS);
}
static enum drm_connector_status
-intel_hdmi_edid_detect(struct drm_connector *connector)
+intel_hdmi_detect(struct drm_connector *connector)
{
struct intel_output *intel_output = to_intel_output(connector);
struct intel_hdmi_priv *hdmi_priv = intel_output->dev_priv;
struct edid *edid = NULL;
enum drm_connector_status status = connector_status_disconnected;
+ hdmi_priv->has_hdmi_sink = false;
edid = drm_get_edid(&intel_output->base,
intel_output->ddc_bus);
- hdmi_priv->has_hdmi_sink = false;
+
if (edid) {
if (edid->input & DRM_EDID_INPUT_DIGITAL) {
status = connector_status_connected;
intel_output->base.display_info.raw_edid = NULL;
kfree(edid);
}
- return status;
-}
-
-static enum drm_connector_status
-igdng_hdmi_detect(struct drm_connector *connector)
-{
- struct intel_output *intel_output = to_intel_output(connector);
- struct intel_hdmi_priv *hdmi_priv = intel_output->dev_priv;
-
- /* FIXME hotplug detect */
- hdmi_priv->has_hdmi_sink = false;
- return intel_hdmi_edid_detect(connector);
-}
-
-static enum drm_connector_status
-intel_hdmi_detect(struct drm_connector *connector)
-{
- struct drm_device *dev = connector->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_output *intel_output = to_intel_output(connector);
- struct intel_hdmi_priv *hdmi_priv = intel_output->dev_priv;
- u32 temp, bit;
-
- if (IS_IGDNG(dev))
- return igdng_hdmi_detect(connector);
-
- temp = I915_READ(PORT_HOTPLUG_EN);
-
- switch (hdmi_priv->sdvox_reg) {
- case SDVOB:
- temp |= HDMIB_HOTPLUG_INT_EN;
- break;
- case SDVOC:
- temp |= HDMIC_HOTPLUG_INT_EN;
- break;
- default:
- return connector_status_unknown;
- }
-
- I915_WRITE(PORT_HOTPLUG_EN, temp);
-
- POSTING_READ(PORT_HOTPLUG_EN);
-
- switch (hdmi_priv->sdvox_reg) {
- case SDVOB:
- bit = HDMIB_HOTPLUG_INT_STATUS;
- break;
- case SDVOC:
- bit = HDMIC_HOTPLUG_INT_STATUS;
- break;
- default:
- return connector_status_unknown;
- }
-
- if ((I915_READ(PORT_HOTPLUG_STAT) & bit) != 0)
- return intel_hdmi_edid_detect(connector);
- else
- return connector_status_disconnected;
+ return status;
}
static int intel_hdmi_get_modes(struct drm_connector *connector)
connector->interlace_allowed = 0;
connector->doublescan_allowed = 0;
+ intel_output->crtc_mask = (1 << 0) | (1 << 1);
/* Set up the DDC bus. */
- if (sdvox_reg == SDVOB)
+ if (sdvox_reg == SDVOB) {
+ intel_output->clone_mask = (1 << INTEL_HDMIB_CLONE_BIT);
intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "HDMIB");
- else if (sdvox_reg == SDVOC)
+ } else if (sdvox_reg == SDVOC) {
+ intel_output->clone_mask = (1 << INTEL_HDMIC_CLONE_BIT);
intel_output->ddc_bus = intel_i2c_create(dev, GPIOD, "HDMIC");
- else if (sdvox_reg == HDMIB)
+ } else if (sdvox_reg == HDMIB) {
+ intel_output->clone_mask = (1 << INTEL_HDMID_CLONE_BIT);
intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOE,
"HDMIB");
- else if (sdvox_reg == HDMIC)
+ } else if (sdvox_reg == HDMIC) {
+ intel_output->clone_mask = (1 << INTEL_HDMIE_CLONE_BIT);
intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOD,
"HDMIC");
- else if (sdvox_reg == HDMID)
+ } else if (sdvox_reg == HDMID) {
+ intel_output->clone_mask = (1 << INTEL_HDMIF_CLONE_BIT);
intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOF,
"HDMID");
-
+ }
if (!intel_output->ddc_bus)
goto err_connector;
DMI_MATCH(DMI_PRODUCT_NAME, "i965GMx-IF"),
},
},
+ {
+ .callback = intel_no_lvds_dmi_callback,
+ .ident = "AOpen Mini PC MP915",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
+ DMI_MATCH(DMI_BOARD_NAME, "i915GMx-F"),
+ },
+ },
{
.callback = intel_no_lvds_dmi_callback,
.ident = "Aopen i945GTt-VFA",
if (IS_IGDNG(dev)) {
if ((I915_READ(PCH_LVDS) & LVDS_DETECTED) == 0)
return;
+ if (dev_priv->edp_support) {
+ DRM_DEBUG("disable LVDS for eDP support\n");
+ return;
+ }
gpio = PCH_GPIOC;
}
drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc);
intel_output->type = INTEL_OUTPUT_LVDS;
+ intel_output->clone_mask = (1 << INTEL_LVDS_CLONE_BIT);
+ intel_output->crtc_mask = (1 << 1);
drm_encoder_helper_add(encoder, &intel_lvds_helper_funcs);
drm_connector_helper_add(connector, &intel_lvds_connector_helper_funcs);
connector->display_info.subpixel_order = SubPixelHorizontalRGB;
#include "drm.h"
#include "drm_crtc.h"
#include "intel_drv.h"
+#include "drm_edid.h"
#include "i915_drm.h"
#include "i915_drv.h"
#include "intel_sdvo_regs.h"
/* Pixel clock limitations reported by the SDVO device, in kHz */
int pixel_clock_min, pixel_clock_max;
+ /*
+ * For multiple function SDVO device,
+ * this is for current attached outputs.
+ */
+ uint16_t attached_output;
+
/**
* This is set if we're going to treat the device as TV-out.
*
u32 save_SDVOX;
};
+static bool
+intel_sdvo_output_setup(struct intel_output *intel_output, uint16_t flags);
+
/**
* Writes the SDVOB or SDVOC with the given value, but always writes both
* SDVOB and SDVOC to work around apparent hardware issues (according to
intel_sdvo_read_response(intel_output, &response, 2);
}
-static void
-intel_sdvo_hdmi_sink_detect(struct drm_connector *connector)
+static bool
+intel_sdvo_multifunc_encoder(struct intel_output *intel_output)
+{
+ struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ int caps = 0;
+
+ if (sdvo_priv->caps.output_flags &
+ (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1))
+ caps++;
+ if (sdvo_priv->caps.output_flags &
+ (SDVO_OUTPUT_RGB0 | SDVO_OUTPUT_RGB1))
+ caps++;
+ if (sdvo_priv->caps.output_flags &
+ (SDVO_OUTPUT_SVID0 | SDVO_OUTPUT_SVID1))
+ caps++;
+ if (sdvo_priv->caps.output_flags &
+ (SDVO_OUTPUT_CVBS0 | SDVO_OUTPUT_CVBS1))
+ caps++;
+ if (sdvo_priv->caps.output_flags &
+ (SDVO_OUTPUT_YPRPB0 | SDVO_OUTPUT_YPRPB1))
+ caps++;
+
+ if (sdvo_priv->caps.output_flags &
+ (SDVO_OUTPUT_SCART0 | SDVO_OUTPUT_SCART1))
+ caps++;
+
+ if (sdvo_priv->caps.output_flags &
+ (SDVO_OUTPUT_LVDS0 | SDVO_OUTPUT_LVDS1))
+ caps++;
+
+ return (caps > 1);
+}
+
+enum drm_connector_status
+intel_sdvo_hdmi_sink_detect(struct drm_connector *connector, u16 response)
{
struct intel_output *intel_output = to_intel_output(connector);
struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ enum drm_connector_status status = connector_status_connected;
struct edid *edid = NULL;
edid = drm_get_edid(&intel_output->base,
intel_output->ddc_bus);
if (edid != NULL) {
- sdvo_priv->is_hdmi = drm_detect_hdmi_monitor(edid);
+ /* Don't report the output as connected if it's a DVI-I
+ * connector with a non-digital EDID coming out.
+ */
+ if (response & (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1)) {
+ if (edid->input & DRM_EDID_INPUT_DIGITAL)
+ sdvo_priv->is_hdmi =
+ drm_detect_hdmi_monitor(edid);
+ else
+ status = connector_status_disconnected;
+ }
+
kfree(edid);
intel_output->base.display_info.raw_edid = NULL;
- }
+
+ } else if (response & (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1))
+ status = connector_status_disconnected;
+
+ return status;
}
static enum drm_connector_status intel_sdvo_detect(struct drm_connector *connector)
{
- u8 response[2];
+ uint16_t response;
u8 status;
struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_ATTACHED_DISPLAYS, NULL, 0);
status = intel_sdvo_read_response(intel_output, &response, 2);
- DRM_DEBUG("SDVO response %d %d\n", response[0], response[1]);
+ DRM_DEBUG("SDVO response %d %d\n", response & 0xff, response >> 8);
if (status != SDVO_CMD_STATUS_SUCCESS)
return connector_status_unknown;
- if ((response[0] != 0) || (response[1] != 0)) {
- intel_sdvo_hdmi_sink_detect(connector);
- return connector_status_connected;
- } else
+ if (response == 0)
return connector_status_disconnected;
+
+ if (intel_sdvo_multifunc_encoder(intel_output) &&
+ sdvo_priv->attached_output != response) {
+ if (sdvo_priv->controlled_output != response &&
+ intel_sdvo_output_setup(intel_output, response) != true)
+ return connector_status_unknown;
+ sdvo_priv->attached_output = response;
+ }
+ return intel_sdvo_hdmi_sink_detect(connector, response);
}
static void intel_sdvo_get_ddc_modes(struct drm_connector *connector)
return 0x72;
}
+static bool
+intel_sdvo_output_setup(struct intel_output *intel_output, uint16_t flags)
+{
+ struct drm_connector *connector = &intel_output->base;
+ struct drm_encoder *encoder = &intel_output->enc;
+ struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ bool ret = true, registered = false;
+
+ sdvo_priv->is_tv = false;
+ intel_output->needs_tv_clock = false;
+ sdvo_priv->is_lvds = false;
+
+ if (device_is_registered(&connector->kdev)) {
+ drm_sysfs_connector_remove(connector);
+ registered = true;
+ }
+
+ if (flags &
+ (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1)) {
+ if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_TMDS0)
+ sdvo_priv->controlled_output = SDVO_OUTPUT_TMDS0;
+ else
+ sdvo_priv->controlled_output = SDVO_OUTPUT_TMDS1;
+
+ encoder->encoder_type = DRM_MODE_ENCODER_TMDS;
+ connector->connector_type = DRM_MODE_CONNECTOR_DVID;
+
+ if (intel_sdvo_get_supp_encode(intel_output,
+ &sdvo_priv->encode) &&
+ intel_sdvo_get_digital_encoding_mode(intel_output) &&
+ sdvo_priv->is_hdmi) {
+ /* enable hdmi encoding mode if supported */
+ intel_sdvo_set_encode(intel_output, SDVO_ENCODE_HDMI);
+ intel_sdvo_set_colorimetry(intel_output,
+ SDVO_COLORIMETRY_RGB256);
+ connector->connector_type = DRM_MODE_CONNECTOR_HDMIA;
+ intel_output->clone_mask =
+ (1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
+ (1 << INTEL_ANALOG_CLONE_BIT);
+ }
+ } else if (flags & SDVO_OUTPUT_SVID0) {
+
+ sdvo_priv->controlled_output = SDVO_OUTPUT_SVID0;
+ encoder->encoder_type = DRM_MODE_ENCODER_TVDAC;
+ connector->connector_type = DRM_MODE_CONNECTOR_SVIDEO;
+ sdvo_priv->is_tv = true;
+ intel_output->needs_tv_clock = true;
+ intel_output->clone_mask = 1 << INTEL_SDVO_TV_CLONE_BIT;
+ } else if (flags & SDVO_OUTPUT_RGB0) {
+
+ sdvo_priv->controlled_output = SDVO_OUTPUT_RGB0;
+ encoder->encoder_type = DRM_MODE_ENCODER_DAC;
+ connector->connector_type = DRM_MODE_CONNECTOR_VGA;
+ intel_output->clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
+ (1 << INTEL_ANALOG_CLONE_BIT);
+ } else if (flags & SDVO_OUTPUT_RGB1) {
+
+ sdvo_priv->controlled_output = SDVO_OUTPUT_RGB1;
+ encoder->encoder_type = DRM_MODE_ENCODER_DAC;
+ connector->connector_type = DRM_MODE_CONNECTOR_VGA;
+ } else if (flags & SDVO_OUTPUT_LVDS0) {
+
+ sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS0;
+ encoder->encoder_type = DRM_MODE_ENCODER_LVDS;
+ connector->connector_type = DRM_MODE_CONNECTOR_LVDS;
+ sdvo_priv->is_lvds = true;
+ intel_output->clone_mask = (1 << INTEL_ANALOG_CLONE_BIT) |
+ (1 << INTEL_SDVO_LVDS_CLONE_BIT);
+ } else if (flags & SDVO_OUTPUT_LVDS1) {
+
+ sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS1;
+ encoder->encoder_type = DRM_MODE_ENCODER_LVDS;
+ connector->connector_type = DRM_MODE_CONNECTOR_LVDS;
+ sdvo_priv->is_lvds = true;
+ intel_output->clone_mask = (1 << INTEL_ANALOG_CLONE_BIT) |
+ (1 << INTEL_SDVO_LVDS_CLONE_BIT);
+ } else {
+
+ unsigned char bytes[2];
+
+ sdvo_priv->controlled_output = 0;
+ memcpy(bytes, &sdvo_priv->caps.output_flags, 2);
+ DRM_DEBUG_KMS(I915_SDVO,
+ "%s: Unknown SDVO output type (0x%02x%02x)\n",
+ SDVO_NAME(sdvo_priv),
+ bytes[0], bytes[1]);
+ ret = false;
+ }
+ intel_output->crtc_mask = (1 << 0) | (1 << 1);
+
+ if (ret && registered)
+ ret = drm_sysfs_connector_add(connector) == 0 ? true : false;
+
+
+ return ret;
+
+}
+
bool intel_sdvo_init(struct drm_device *dev, int output_device)
{
struct drm_connector *connector;
struct intel_output *intel_output;
struct intel_sdvo_priv *sdvo_priv;
- int connector_type;
u8 ch[0x40];
int i;
- int encoder_type;
intel_output = kcalloc(sizeof(struct intel_output)+sizeof(struct intel_sdvo_priv), 1, GFP_KERNEL);
if (!intel_output) {
intel_output->ddc_bus->algo = &intel_sdvo_i2c_bit_algo;
/* In defaut case sdvo lvds is false */
- sdvo_priv->is_lvds = false;
intel_sdvo_get_capabilities(intel_output, &sdvo_priv->caps);
- if (sdvo_priv->caps.output_flags &
- (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1)) {
- if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_TMDS0)
- sdvo_priv->controlled_output = SDVO_OUTPUT_TMDS0;
- else
- sdvo_priv->controlled_output = SDVO_OUTPUT_TMDS1;
-
- encoder_type = DRM_MODE_ENCODER_TMDS;
- connector_type = DRM_MODE_CONNECTOR_DVID;
-
- if (intel_sdvo_get_supp_encode(intel_output,
- &sdvo_priv->encode) &&
- intel_sdvo_get_digital_encoding_mode(intel_output) &&
- sdvo_priv->is_hdmi) {
- /* enable hdmi encoding mode if supported */
- intel_sdvo_set_encode(intel_output, SDVO_ENCODE_HDMI);
- intel_sdvo_set_colorimetry(intel_output,
- SDVO_COLORIMETRY_RGB256);
- connector_type = DRM_MODE_CONNECTOR_HDMIA;
- }
- }
- else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_SVID0)
- {
- sdvo_priv->controlled_output = SDVO_OUTPUT_SVID0;
- encoder_type = DRM_MODE_ENCODER_TVDAC;
- connector_type = DRM_MODE_CONNECTOR_SVIDEO;
- sdvo_priv->is_tv = true;
- intel_output->needs_tv_clock = true;
- }
- else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB0)
- {
- sdvo_priv->controlled_output = SDVO_OUTPUT_RGB0;
- encoder_type = DRM_MODE_ENCODER_DAC;
- connector_type = DRM_MODE_CONNECTOR_VGA;
- }
- else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB1)
- {
- sdvo_priv->controlled_output = SDVO_OUTPUT_RGB1;
- encoder_type = DRM_MODE_ENCODER_DAC;
- connector_type = DRM_MODE_CONNECTOR_VGA;
- }
- else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_LVDS0)
- {
- sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS0;
- encoder_type = DRM_MODE_ENCODER_LVDS;
- connector_type = DRM_MODE_CONNECTOR_LVDS;
- sdvo_priv->is_lvds = true;
- }
- else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_LVDS1)
- {
- sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS1;
- encoder_type = DRM_MODE_ENCODER_LVDS;
- connector_type = DRM_MODE_CONNECTOR_LVDS;
- sdvo_priv->is_lvds = true;
- }
- else
- {
- unsigned char bytes[2];
-
- sdvo_priv->controlled_output = 0;
- memcpy (bytes, &sdvo_priv->caps.output_flags, 2);
- DRM_DEBUG_KMS(I915_SDVO,
- "%s: Unknown SDVO output type (0x%02x%02x)\n",
- SDVO_NAME(sdvo_priv),
- bytes[0], bytes[1]);
- encoder_type = DRM_MODE_ENCODER_NONE;
- connector_type = DRM_MODE_CONNECTOR_Unknown;
+ if (intel_sdvo_output_setup(intel_output,
+ sdvo_priv->caps.output_flags) != true) {
+ DRM_DEBUG("SDVO output failed to setup on SDVO%c\n",
+ output_device == SDVOB ? 'B' : 'C');
goto err_i2c;
}
+
connector = &intel_output->base;
drm_connector_init(dev, connector, &intel_sdvo_connector_funcs,
- connector_type);
+ connector->connector_type);
+
drm_connector_helper_add(connector, &intel_sdvo_connector_helper_funcs);
connector->interlace_allowed = 0;
connector->doublescan_allowed = 0;
connector->display_info.subpixel_order = SubPixelHorizontalRGB;
- drm_encoder_init(dev, &intel_output->enc, &intel_sdvo_enc_funcs, encoder_type);
+ drm_encoder_init(dev, &intel_output->enc,
+ &intel_sdvo_enc_funcs, intel_output->enc.encoder_type);
+
drm_encoder_helper_add(&intel_output->enc, &intel_sdvo_helper_funcs);
drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc);
{"1920x1080", 1920, 1080},
};
+/*
+ * Chose preferred mode according to line number of TV format
+ */
+static void
+intel_tv_chose_preferred_modes(struct drm_connector *connector,
+ struct drm_display_mode *mode_ptr)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+ const struct tv_mode *tv_mode = intel_tv_mode_find(intel_output);
+
+ if (tv_mode->nbr_end < 480 && mode_ptr->vdisplay == 480)
+ mode_ptr->type |= DRM_MODE_TYPE_PREFERRED;
+ else if (tv_mode->nbr_end > 480) {
+ if (tv_mode->progressive == true && tv_mode->nbr_end < 720) {
+ if (mode_ptr->vdisplay == 720)
+ mode_ptr->type |= DRM_MODE_TYPE_PREFERRED;
+ } else if (mode_ptr->vdisplay == 1080)
+ mode_ptr->type |= DRM_MODE_TYPE_PREFERRED;
+ }
+}
+
/**
* Stub get_modes function.
*
mode_ptr->clock = (int) tmp;
mode_ptr->type = DRM_MODE_TYPE_DRIVER;
+ intel_tv_chose_preferred_modes(connector, mode_ptr);
drm_mode_probed_add(connector, mode_ptr);
count++;
}
if (!intel_output) {
return;
}
+
connector = &intel_output->base;
drm_connector_init(dev, connector, &intel_tv_connector_funcs,
drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc);
tv_priv = (struct intel_tv_priv *)(intel_output + 1);
intel_output->type = INTEL_OUTPUT_TVOUT;
+ intel_output->crtc_mask = (1 << 0) | (1 << 1);
+ intel_output->clone_mask = (1 << INTEL_TV_CLONE_BIT);
intel_output->enc.possible_crtcs = ((1 << 0) | (1 << 1));
intel_output->enc.possible_clones = (1 << INTEL_OUTPUT_TVOUT);
intel_output->dev_priv = tv_priv;
radeon_encoders.o radeon_display.o radeon_cursor.o radeon_i2c.o \
radeon_clocks.o radeon_fb.o radeon_gem.o radeon_ring.o radeon_irq_kms.o \
radeon_cs.o radeon_bios.o radeon_benchmark.o r100.o r300.o r420.o \
- rs400.o rs600.o rs690.o rv515.o r520.o r600.o rs780.o rv770.o
+ rs400.o rs600.o rs690.o rv515.o r520.o r600.o rs780.o rv770.o \
+ radeon_test.o
radeon-$(CONFIG_COMPAT) += radeon_ioc32.o
#include "atom.h"
#include "atom-bits.h"
+static void atombios_overscan_setup(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct drm_device *dev = crtc->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+ SET_CRTC_OVERSCAN_PS_ALLOCATION args;
+ int index = GetIndexIntoMasterTable(COMMAND, SetCRTC_OverScan);
+ int a1, a2;
+
+ memset(&args, 0, sizeof(args));
+
+ args.usOverscanRight = 0;
+ args.usOverscanLeft = 0;
+ args.usOverscanBottom = 0;
+ args.usOverscanTop = 0;
+ args.ucCRTC = radeon_crtc->crtc_id;
+
+ switch (radeon_crtc->rmx_type) {
+ case RMX_CENTER:
+ args.usOverscanTop = (adjusted_mode->crtc_vdisplay - mode->crtc_vdisplay) / 2;
+ args.usOverscanBottom = (adjusted_mode->crtc_vdisplay - mode->crtc_vdisplay) / 2;
+ args.usOverscanLeft = (adjusted_mode->crtc_hdisplay - mode->crtc_hdisplay) / 2;
+ args.usOverscanRight = (adjusted_mode->crtc_hdisplay - mode->crtc_hdisplay) / 2;
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+ break;
+ case RMX_ASPECT:
+ a1 = mode->crtc_vdisplay * adjusted_mode->crtc_hdisplay;
+ a2 = adjusted_mode->crtc_vdisplay * mode->crtc_hdisplay;
+
+ if (a1 > a2) {
+ args.usOverscanLeft = (adjusted_mode->crtc_hdisplay - (a2 / mode->crtc_vdisplay)) / 2;
+ args.usOverscanRight = (adjusted_mode->crtc_hdisplay - (a2 / mode->crtc_vdisplay)) / 2;
+ } else if (a2 > a1) {
+ args.usOverscanLeft = (adjusted_mode->crtc_vdisplay - (a1 / mode->crtc_hdisplay)) / 2;
+ args.usOverscanRight = (adjusted_mode->crtc_vdisplay - (a1 / mode->crtc_hdisplay)) / 2;
+ }
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+ break;
+ case RMX_FULL:
+ default:
+ args.usOverscanRight = 0;
+ args.usOverscanLeft = 0;
+ args.usOverscanBottom = 0;
+ args.usOverscanTop = 0;
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+ break;
+ }
+}
+
+static void atombios_scaler_setup(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+ ENABLE_SCALER_PS_ALLOCATION args;
+ int index = GetIndexIntoMasterTable(COMMAND, EnableScaler);
+ /* fixme - fill in enc_priv for atom dac */
+ enum radeon_tv_std tv_std = TV_STD_NTSC;
+
+ if (!ASIC_IS_AVIVO(rdev) && radeon_crtc->crtc_id)
+ return;
+
+ memset(&args, 0, sizeof(args));
+
+ args.ucScaler = radeon_crtc->crtc_id;
+
+ if (radeon_crtc->devices & (ATOM_DEVICE_TV_SUPPORT)) {
+ switch (tv_std) {
+ case TV_STD_NTSC:
+ default:
+ args.ucTVStandard = ATOM_TV_NTSC;
+ break;
+ case TV_STD_PAL:
+ args.ucTVStandard = ATOM_TV_PAL;
+ break;
+ case TV_STD_PAL_M:
+ args.ucTVStandard = ATOM_TV_PALM;
+ break;
+ case TV_STD_PAL_60:
+ args.ucTVStandard = ATOM_TV_PAL60;
+ break;
+ case TV_STD_NTSC_J:
+ args.ucTVStandard = ATOM_TV_NTSCJ;
+ break;
+ case TV_STD_SCART_PAL:
+ args.ucTVStandard = ATOM_TV_PAL; /* ??? */
+ break;
+ case TV_STD_SECAM:
+ args.ucTVStandard = ATOM_TV_SECAM;
+ break;
+ case TV_STD_PAL_CN:
+ args.ucTVStandard = ATOM_TV_PALCN;
+ break;
+ }
+ args.ucEnable = SCALER_ENABLE_MULTITAP_MODE;
+ } else if (radeon_crtc->devices & (ATOM_DEVICE_CV_SUPPORT)) {
+ args.ucTVStandard = ATOM_TV_CV;
+ args.ucEnable = SCALER_ENABLE_MULTITAP_MODE;
+ } else {
+ switch (radeon_crtc->rmx_type) {
+ case RMX_FULL:
+ args.ucEnable = ATOM_SCALER_EXPANSION;
+ break;
+ case RMX_CENTER:
+ args.ucEnable = ATOM_SCALER_CENTER;
+ break;
+ case RMX_ASPECT:
+ args.ucEnable = ATOM_SCALER_EXPANSION;
+ break;
+ default:
+ if (ASIC_IS_AVIVO(rdev))
+ args.ucEnable = ATOM_SCALER_DISABLE;
+ else
+ args.ucEnable = ATOM_SCALER_CENTER;
+ break;
+ }
+ }
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+ if (radeon_crtc->devices & (ATOM_DEVICE_CV_SUPPORT | ATOM_DEVICE_TV_SUPPORT)
+ && rdev->family >= CHIP_RV515 && rdev->family <= CHIP_RV570) {
+ atom_rv515_force_tv_scaler(rdev);
+ }
+}
+
static void atombios_lock_crtc(struct drm_crtc *crtc, int lock)
{
struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
if (ASIC_IS_AVIVO(rdev)) {
uint32_t ss_cntl;
+ if ((rdev->family == CHIP_RS600) ||
+ (rdev->family == CHIP_RS690) ||
+ (rdev->family == CHIP_RS740))
+ pll_flags |= (RADEON_PLL_USE_FRAC_FB_DIV |
+ RADEON_PLL_PREFER_CLOSEST_LOWER);
+
if (ASIC_IS_DCE32(rdev) && mode->clock > 200000) /* range limits??? */
pll_flags |= RADEON_PLL_PREFER_HIGH_FB_DIV;
else
struct drm_gem_object *obj;
struct drm_radeon_gem_object *obj_priv;
uint64_t fb_location;
- uint32_t fb_format, fb_pitch_pixels;
+ uint32_t fb_format, fb_pitch_pixels, tiling_flags;
if (!crtc->fb)
return -EINVAL;
return -EINVAL;
}
- /* TODO tiling */
+ radeon_object_get_tiling_flags(obj->driver_private,
+ &tiling_flags, NULL);
+ if (tiling_flags & RADEON_TILING_MACRO)
+ fb_format |= AVIVO_D1GRPH_MACRO_ADDRESS_MODE;
+
+ if (tiling_flags & RADEON_TILING_MICRO)
+ fb_format |= AVIVO_D1GRPH_TILED;
+
if (radeon_crtc->crtc_id == 0)
WREG32(AVIVO_D1VGA_CONTROL, 0);
else
radeon_crtc_set_base(crtc, x, y, old_fb);
radeon_legacy_atom_set_surface(crtc);
}
+ atombios_overscan_setup(crtc, mode, adjusted_mode);
+ atombios_scaler_setup(crtc);
+ radeon_bandwidth_update(rdev);
return 0;
}
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
+ if (!radeon_crtc_scaling_mode_fixup(crtc, mode, adjusted_mode))
+ return false;
return true;
}
AVIVO_D2CRTC_H_TOTAL - AVIVO_D1CRTC_H_TOTAL;
drm_crtc_helper_add(&radeon_crtc->base, &atombios_helper_funcs);
}
-
-void radeon_init_disp_bw_avivo(struct drm_device *dev,
- struct drm_display_mode *mode1,
- uint32_t pixel_bytes1,
- struct drm_display_mode *mode2,
- uint32_t pixel_bytes2)
-{
- struct radeon_device *rdev = dev->dev_private;
- fixed20_12 min_mem_eff;
- fixed20_12 peak_disp_bw, mem_bw, pix_clk, pix_clk2, temp_ff;
- fixed20_12 sclk_ff, mclk_ff;
- uint32_t dc_lb_memory_split, temp;
-
- min_mem_eff.full = rfixed_const_8(0);
- if (rdev->disp_priority == 2) {
- uint32_t mc_init_misc_lat_timer = 0;
- if (rdev->family == CHIP_RV515)
- mc_init_misc_lat_timer =
- RREG32_MC(RV515_MC_INIT_MISC_LAT_TIMER);
- else if (rdev->family == CHIP_RS690)
- mc_init_misc_lat_timer =
- RREG32_MC(RS690_MC_INIT_MISC_LAT_TIMER);
-
- mc_init_misc_lat_timer &=
- ~(R300_MC_DISP1R_INIT_LAT_MASK <<
- R300_MC_DISP1R_INIT_LAT_SHIFT);
- mc_init_misc_lat_timer &=
- ~(R300_MC_DISP0R_INIT_LAT_MASK <<
- R300_MC_DISP0R_INIT_LAT_SHIFT);
-
- if (mode2)
- mc_init_misc_lat_timer |=
- (1 << R300_MC_DISP1R_INIT_LAT_SHIFT);
- if (mode1)
- mc_init_misc_lat_timer |=
- (1 << R300_MC_DISP0R_INIT_LAT_SHIFT);
-
- if (rdev->family == CHIP_RV515)
- WREG32_MC(RV515_MC_INIT_MISC_LAT_TIMER,
- mc_init_misc_lat_timer);
- else if (rdev->family == CHIP_RS690)
- WREG32_MC(RS690_MC_INIT_MISC_LAT_TIMER,
- mc_init_misc_lat_timer);
- }
-
- /*
- * determine is there is enough bw for current mode
- */
- temp_ff.full = rfixed_const(100);
- mclk_ff.full = rfixed_const(rdev->clock.default_mclk);
- mclk_ff.full = rfixed_div(mclk_ff, temp_ff);
- sclk_ff.full = rfixed_const(rdev->clock.default_sclk);
- sclk_ff.full = rfixed_div(sclk_ff, temp_ff);
-
- temp = (rdev->mc.vram_width / 8) * (rdev->mc.vram_is_ddr ? 2 : 1);
- temp_ff.full = rfixed_const(temp);
- mem_bw.full = rfixed_mul(mclk_ff, temp_ff);
- mem_bw.full = rfixed_mul(mem_bw, min_mem_eff);
-
- pix_clk.full = 0;
- pix_clk2.full = 0;
- peak_disp_bw.full = 0;
- if (mode1) {
- temp_ff.full = rfixed_const(1000);
- pix_clk.full = rfixed_const(mode1->clock); /* convert to fixed point */
- pix_clk.full = rfixed_div(pix_clk, temp_ff);
- temp_ff.full = rfixed_const(pixel_bytes1);
- peak_disp_bw.full += rfixed_mul(pix_clk, temp_ff);
- }
- if (mode2) {
- temp_ff.full = rfixed_const(1000);
- pix_clk2.full = rfixed_const(mode2->clock); /* convert to fixed point */
- pix_clk2.full = rfixed_div(pix_clk2, temp_ff);
- temp_ff.full = rfixed_const(pixel_bytes2);
- peak_disp_bw.full += rfixed_mul(pix_clk2, temp_ff);
- }
-
- if (peak_disp_bw.full >= mem_bw.full) {
- DRM_ERROR
- ("You may not have enough display bandwidth for current mode\n"
- "If you have flickering problem, try to lower resolution, refresh rate, or color depth\n");
- printk("peak disp bw %d, mem_bw %d\n",
- rfixed_trunc(peak_disp_bw), rfixed_trunc(mem_bw));
- }
-
- /*
- * Line Buffer Setup
- * There is a single line buffer shared by both display controllers.
- * DC_LB_MEMORY_SPLIT controls how that line buffer is shared between the display
- * controllers. The paritioning can either be done manually or via one of four
- * preset allocations specified in bits 1:0:
- * 0 - line buffer is divided in half and shared between each display controller
- * 1 - D1 gets 3/4 of the line buffer, D2 gets 1/4
- * 2 - D1 gets the whole buffer
- * 3 - D1 gets 1/4 of the line buffer, D2 gets 3/4
- * Setting bit 2 of DC_LB_MEMORY_SPLIT controls switches to manual allocation mode.
- * In manual allocation mode, D1 always starts at 0, D1 end/2 is specified in bits
- * 14:4; D2 allocation follows D1.
- */
-
- /* is auto or manual better ? */
- dc_lb_memory_split =
- RREG32(AVIVO_DC_LB_MEMORY_SPLIT) & ~AVIVO_DC_LB_MEMORY_SPLIT_MASK;
- dc_lb_memory_split &= ~AVIVO_DC_LB_MEMORY_SPLIT_SHIFT_MODE;
-#if 1
- /* auto */
- if (mode1 && mode2) {
- if (mode1->hdisplay > mode2->hdisplay) {
- if (mode1->hdisplay > 2560)
- dc_lb_memory_split |=
- AVIVO_DC_LB_MEMORY_SPLIT_D1_3Q_D2_1Q;
- else
- dc_lb_memory_split |=
- AVIVO_DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
- } else if (mode2->hdisplay > mode1->hdisplay) {
- if (mode2->hdisplay > 2560)
- dc_lb_memory_split |=
- AVIVO_DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q;
- else
- dc_lb_memory_split |=
- AVIVO_DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
- } else
- dc_lb_memory_split |=
- AVIVO_DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
- } else if (mode1) {
- dc_lb_memory_split |= AVIVO_DC_LB_MEMORY_SPLIT_D1_ONLY;
- } else if (mode2) {
- dc_lb_memory_split |= AVIVO_DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q;
- }
-#else
- /* manual */
- dc_lb_memory_split |= AVIVO_DC_LB_MEMORY_SPLIT_SHIFT_MODE;
- dc_lb_memory_split &=
- ~(AVIVO_DC_LB_DISP1_END_ADR_MASK <<
- AVIVO_DC_LB_DISP1_END_ADR_SHIFT);
- if (mode1) {
- dc_lb_memory_split |=
- ((((mode1->hdisplay / 2) + 64) & AVIVO_DC_LB_DISP1_END_ADR_MASK)
- << AVIVO_DC_LB_DISP1_END_ADR_SHIFT);
- } else if (mode2) {
- dc_lb_memory_split |= (0 << AVIVO_DC_LB_DISP1_END_ADR_SHIFT);
- }
-#endif
- WREG32(AVIVO_DC_LB_MEMORY_SPLIT, dc_lb_memory_split);
-}
if (i < 0 || i > rdev->gart.num_gpu_pages) {
return -EINVAL;
}
- rdev->gart.table.ram.ptr[i] = cpu_to_le32((uint32_t)addr);
+ rdev->gart.table.ram.ptr[i] = cpu_to_le32(lower_32_bits(addr));
return 0;
}
DRM_ERROR("Failed to register debugfs file for R100 MC !\n");
}
/* Write VRAM size in case we are limiting it */
- WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size);
- tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+ WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
+ /* Novell bug 204882 for RN50/M6/M7 with 8/16/32MB VRAM,
+ * if the aperture is 64MB but we have 32MB VRAM
+ * we report only 32MB VRAM but we have to set MC_FB_LOCATION
+ * to 64MB, otherwise the gpu accidentially dies */
+ tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
tmp = REG_SET(RADEON_MC_FB_TOP, tmp >> 16);
tmp |= REG_SET(RADEON_MC_FB_START, rdev->mc.vram_location >> 16);
WREG32(RADEON_MC_FB_LOCATION, tmp);
r100_pci_gart_disable(rdev);
/* Setup GPU memory space */
- rdev->mc.vram_location = 0xFFFFFFFFUL;
rdev->mc.gtt_location = 0xFFFFFFFFUL;
if (rdev->flags & RADEON_IS_AGP) {
r = radeon_agp_init(rdev);
}
+/*
+ * Interrupts
+ */
+int r100_irq_set(struct radeon_device *rdev)
+{
+ uint32_t tmp = 0;
+
+ if (rdev->irq.sw_int) {
+ tmp |= RADEON_SW_INT_ENABLE;
+ }
+ if (rdev->irq.crtc_vblank_int[0]) {
+ tmp |= RADEON_CRTC_VBLANK_MASK;
+ }
+ if (rdev->irq.crtc_vblank_int[1]) {
+ tmp |= RADEON_CRTC2_VBLANK_MASK;
+ }
+ WREG32(RADEON_GEN_INT_CNTL, tmp);
+ return 0;
+}
+
+static inline uint32_t r100_irq_ack(struct radeon_device *rdev)
+{
+ uint32_t irqs = RREG32(RADEON_GEN_INT_STATUS);
+ uint32_t irq_mask = RADEON_SW_INT_TEST | RADEON_CRTC_VBLANK_STAT |
+ RADEON_CRTC2_VBLANK_STAT;
+
+ if (irqs) {
+ WREG32(RADEON_GEN_INT_STATUS, irqs);
+ }
+ return irqs & irq_mask;
+}
+
+int r100_irq_process(struct radeon_device *rdev)
+{
+ uint32_t status;
+
+ status = r100_irq_ack(rdev);
+ if (!status) {
+ return IRQ_NONE;
+ }
+ while (status) {
+ /* SW interrupt */
+ if (status & RADEON_SW_INT_TEST) {
+ radeon_fence_process(rdev);
+ }
+ /* Vertical blank interrupts */
+ if (status & RADEON_CRTC_VBLANK_STAT) {
+ drm_handle_vblank(rdev->ddev, 0);
+ }
+ if (status & RADEON_CRTC2_VBLANK_STAT) {
+ drm_handle_vblank(rdev->ddev, 1);
+ }
+ status = r100_irq_ack(rdev);
+ }
+ return IRQ_HANDLED;
+}
+
+u32 r100_get_vblank_counter(struct radeon_device *rdev, int crtc)
+{
+ if (crtc == 0)
+ return RREG32(RADEON_CRTC_CRNT_FRAME);
+ else
+ return RREG32(RADEON_CRTC2_CRNT_FRAME);
+}
+
+
/*
* Fence emission
*/
unsigned idx)
{
struct radeon_cs_chunk *ib_chunk = &p->chunks[p->chunk_ib_idx];
- uint32_t header = ib_chunk->kdata[idx];
+ uint32_t header;
if (idx >= ib_chunk->length_dw) {
DRM_ERROR("Can not parse packet at %d after CS end %d !\n",
idx, ib_chunk->length_dw);
return -EINVAL;
}
+ header = ib_chunk->kdata[idx];
pkt->idx = idx;
pkt->type = CP_PACKET_GET_TYPE(header);
pkt->count = CP_PACKET_GET_COUNT(header);
return 0;
}
+/**
+ * r100_cs_packet_next_vline() - parse userspace VLINE packet
+ * @parser: parser structure holding parsing context.
+ *
+ * Userspace sends a special sequence for VLINE waits.
+ * PACKET0 - VLINE_START_END + value
+ * PACKET0 - WAIT_UNTIL +_value
+ * RELOC (P3) - crtc_id in reloc.
+ *
+ * This function parses this and relocates the VLINE START END
+ * and WAIT UNTIL packets to the correct crtc.
+ * It also detects a switched off crtc and nulls out the
+ * wait in that case.
+ */
+int r100_cs_packet_parse_vline(struct radeon_cs_parser *p)
+{
+ struct radeon_cs_chunk *ib_chunk;
+ struct drm_mode_object *obj;
+ struct drm_crtc *crtc;
+ struct radeon_crtc *radeon_crtc;
+ struct radeon_cs_packet p3reloc, waitreloc;
+ int crtc_id;
+ int r;
+ uint32_t header, h_idx, reg;
+
+ ib_chunk = &p->chunks[p->chunk_ib_idx];
+
+ /* parse the wait until */
+ r = r100_cs_packet_parse(p, &waitreloc, p->idx);
+ if (r)
+ return r;
+
+ /* check its a wait until and only 1 count */
+ if (waitreloc.reg != RADEON_WAIT_UNTIL ||
+ waitreloc.count != 0) {
+ DRM_ERROR("vline wait had illegal wait until segment\n");
+ r = -EINVAL;
+ return r;
+ }
+
+ if (ib_chunk->kdata[waitreloc.idx + 1] != RADEON_WAIT_CRTC_VLINE) {
+ DRM_ERROR("vline wait had illegal wait until\n");
+ r = -EINVAL;
+ return r;
+ }
+
+ /* jump over the NOP */
+ r = r100_cs_packet_parse(p, &p3reloc, p->idx);
+ if (r)
+ return r;
+
+ h_idx = p->idx - 2;
+ p->idx += waitreloc.count;
+ p->idx += p3reloc.count;
+
+ header = ib_chunk->kdata[h_idx];
+ crtc_id = ib_chunk->kdata[h_idx + 5];
+ reg = ib_chunk->kdata[h_idx] >> 2;
+ mutex_lock(&p->rdev->ddev->mode_config.mutex);
+ obj = drm_mode_object_find(p->rdev->ddev, crtc_id, DRM_MODE_OBJECT_CRTC);
+ if (!obj) {
+ DRM_ERROR("cannot find crtc %d\n", crtc_id);
+ r = -EINVAL;
+ goto out;
+ }
+ crtc = obj_to_crtc(obj);
+ radeon_crtc = to_radeon_crtc(crtc);
+ crtc_id = radeon_crtc->crtc_id;
+
+ if (!crtc->enabled) {
+ /* if the CRTC isn't enabled - we need to nop out the wait until */
+ ib_chunk->kdata[h_idx + 2] = PACKET2(0);
+ ib_chunk->kdata[h_idx + 3] = PACKET2(0);
+ } else if (crtc_id == 1) {
+ switch (reg) {
+ case AVIVO_D1MODE_VLINE_START_END:
+ header &= R300_CP_PACKET0_REG_MASK;
+ header |= AVIVO_D2MODE_VLINE_START_END >> 2;
+ break;
+ case RADEON_CRTC_GUI_TRIG_VLINE:
+ header &= R300_CP_PACKET0_REG_MASK;
+ header |= RADEON_CRTC2_GUI_TRIG_VLINE >> 2;
+ break;
+ default:
+ DRM_ERROR("unknown crtc reloc\n");
+ r = -EINVAL;
+ goto out;
+ }
+ ib_chunk->kdata[h_idx] = header;
+ ib_chunk->kdata[h_idx + 3] |= RADEON_ENG_DISPLAY_SELECT_CRTC1;
+ }
+out:
+ mutex_unlock(&p->rdev->ddev->mode_config.mutex);
+ return r;
+}
+
/**
* r100_cs_packet_next_reloc() - parse next packet which should be reloc packet3
* @parser: parser structure holding parsing context.
unsigned idx;
bool onereg;
int r;
+ u32 tile_flags = 0;
ib = p->ib->ptr;
ib_chunk = &p->chunks[p->chunk_ib_idx];
}
for (i = 0; i <= pkt->count; i++, idx++, reg += 4) {
switch (reg) {
+ case RADEON_CRTC_GUI_TRIG_VLINE:
+ r = r100_cs_packet_parse_vline(p);
+ if (r) {
+ DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+ idx, reg);
+ r100_cs_dump_packet(p, pkt);
+ return r;
+ }
+ break;
/* FIXME: only allow PACKET3 blit? easier to check for out of
* range access */
case RADEON_DST_PITCH_OFFSET:
}
tmp = ib_chunk->kdata[idx] & 0x003fffff;
tmp += (((u32)reloc->lobj.gpu_offset) >> 10);
- ib[idx] = (ib_chunk->kdata[idx] & 0xffc00000) | tmp;
+
+ if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
+ tile_flags |= RADEON_DST_TILE_MACRO;
+ if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) {
+ if (reg == RADEON_SRC_PITCH_OFFSET) {
+ DRM_ERROR("Cannot src blit from microtiled surface\n");
+ r100_cs_dump_packet(p, pkt);
+ return -EINVAL;
+ }
+ tile_flags |= RADEON_DST_TILE_MICRO;
+ }
+
+ tmp |= tile_flags;
+ ib[idx] = (ib_chunk->kdata[idx] & 0x3fc00000) | tmp;
break;
case RADEON_RB3D_DEPTHOFFSET:
case RADEON_RB3D_COLOROFFSET:
case R300_TX_OFFSET_0+52:
case R300_TX_OFFSET_0+56:
case R300_TX_OFFSET_0+60:
+ /* rn50 has no 3D engine so fail on any 3d setup */
+ if (ASIC_IS_RN50(p->rdev)) {
+ DRM_ERROR("attempt to use RN50 3D engine failed\n");
+ return -EINVAL;
+ }
+ r = r100_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+ idx, reg);
+ r100_cs_dump_packet(p, pkt);
+ return r;
+ }
+ ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+ break;
+ case R300_RB3D_COLORPITCH0:
+ case RADEON_RB3D_COLORPITCH:
+ r = r100_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+ idx, reg);
+ r100_cs_dump_packet(p, pkt);
+ return r;
+ }
+
+ if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
+ tile_flags |= RADEON_COLOR_TILE_ENABLE;
+ if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
+ tile_flags |= RADEON_COLOR_MICROTILE_ENABLE;
+
+ tmp = ib_chunk->kdata[idx] & ~(0x7 << 16);
+ tmp |= tile_flags;
+ ib[idx] = tmp;
+ break;
+ case RADEON_RB3D_ZPASS_ADDR:
r = r100_cs_packet_next_reloc(p, &reloc);
if (r) {
DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
}
}
-void r100_vram_info(struct radeon_device *rdev)
+static u32 r100_get_accessible_vram(struct radeon_device *rdev)
{
- r100_vram_get_type(rdev);
+ u32 aper_size;
+ u8 byte;
+
+ aper_size = RREG32(RADEON_CONFIG_APER_SIZE);
+
+ /* Set HDP_APER_CNTL only on cards that are known not to be broken,
+ * that is has the 2nd generation multifunction PCI interface
+ */
+ if (rdev->family == CHIP_RV280 ||
+ rdev->family >= CHIP_RV350) {
+ WREG32_P(RADEON_HOST_PATH_CNTL, RADEON_HDP_APER_CNTL,
+ ~RADEON_HDP_APER_CNTL);
+ DRM_INFO("Generation 2 PCI interface, using max accessible memory\n");
+ return aper_size * 2;
+ }
+
+ /* Older cards have all sorts of funny issues to deal with. First
+ * check if it's a multifunction card by reading the PCI config
+ * header type... Limit those to one aperture size
+ */
+ pci_read_config_byte(rdev->pdev, 0xe, &byte);
+ if (byte & 0x80) {
+ DRM_INFO("Generation 1 PCI interface in multifunction mode\n");
+ DRM_INFO("Limiting VRAM to one aperture\n");
+ return aper_size;
+ }
+
+ /* Single function older card. We read HDP_APER_CNTL to see how the BIOS
+ * have set it up. We don't write this as it's broken on some ASICs but
+ * we expect the BIOS to have done the right thing (might be too optimistic...)
+ */
+ if (RREG32(RADEON_HOST_PATH_CNTL) & RADEON_HDP_APER_CNTL)
+ return aper_size * 2;
+ return aper_size;
+}
+
+void r100_vram_init_sizes(struct radeon_device *rdev)
+{
+ u64 config_aper_size;
+ u32 accessible;
+
+ config_aper_size = RREG32(RADEON_CONFIG_APER_SIZE);
if (rdev->flags & RADEON_IS_IGP) {
uint32_t tom;
/* read NB_TOM to get the amount of ram stolen for the GPU */
tom = RREG32(RADEON_NB_TOM);
- rdev->mc.vram_size = (((tom >> 16) - (tom & 0xffff) + 1) << 16);
- WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size);
+ rdev->mc.real_vram_size = (((tom >> 16) - (tom & 0xffff) + 1) << 16);
+ /* for IGPs we need to keep VRAM where it was put by the BIOS */
+ rdev->mc.vram_location = (tom & 0xffff) << 16;
+ WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
+ rdev->mc.mc_vram_size = rdev->mc.real_vram_size;
} else {
- rdev->mc.vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
+ rdev->mc.real_vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
/* Some production boards of m6 will report 0
* if it's 8 MB
*/
- if (rdev->mc.vram_size == 0) {
- rdev->mc.vram_size = 8192 * 1024;
- WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size);
+ if (rdev->mc.real_vram_size == 0) {
+ rdev->mc.real_vram_size = 8192 * 1024;
+ WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
}
+ /* let driver place VRAM */
+ rdev->mc.vram_location = 0xFFFFFFFFUL;
+ /* Fix for RN50, M6, M7 with 8/16/32(??) MBs of VRAM -
+ * Novell bug 204882 + along with lots of ubuntu ones */
+ if (config_aper_size > rdev->mc.real_vram_size)
+ rdev->mc.mc_vram_size = config_aper_size;
+ else
+ rdev->mc.mc_vram_size = rdev->mc.real_vram_size;
}
+ /* work out accessible VRAM */
+ accessible = r100_get_accessible_vram(rdev);
+
rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+
+ if (accessible > rdev->mc.aper_size)
+ accessible = rdev->mc.aper_size;
+
+ if (rdev->mc.mc_vram_size > rdev->mc.aper_size)
+ rdev->mc.mc_vram_size = rdev->mc.aper_size;
+
+ if (rdev->mc.real_vram_size > rdev->mc.aper_size)
+ rdev->mc.real_vram_size = rdev->mc.aper_size;
+}
+
+void r100_vram_info(struct radeon_device *rdev)
+{
+ r100_vram_get_type(rdev);
+
+ r100_vram_init_sizes(rdev);
}
r100_pll_errata_after_data(rdev);
}
-uint32_t r100_mm_rreg(struct radeon_device *rdev, uint32_t reg)
-{
- if (reg < 0x10000)
- return readl(((void __iomem *)rdev->rmmio) + reg);
- else {
- writel(reg, ((void __iomem *)rdev->rmmio) + RADEON_MM_INDEX);
- return readl(((void __iomem *)rdev->rmmio) + RADEON_MM_DATA);
- }
-}
-
-void r100_mm_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
-{
- if (reg < 0x10000)
- writel(v, ((void __iomem *)rdev->rmmio) + reg);
- else {
- writel(reg, ((void __iomem *)rdev->rmmio) + RADEON_MM_INDEX);
- writel(v, ((void __iomem *)rdev->rmmio) + RADEON_MM_DATA);
- }
-}
-
int r100_init(struct radeon_device *rdev)
{
return 0;
return 0;
#endif
}
+
+int r100_set_surface_reg(struct radeon_device *rdev, int reg,
+ uint32_t tiling_flags, uint32_t pitch,
+ uint32_t offset, uint32_t obj_size)
+{
+ int surf_index = reg * 16;
+ int flags = 0;
+
+ /* r100/r200 divide by 16 */
+ if (rdev->family < CHIP_R300)
+ flags = pitch / 16;
+ else
+ flags = pitch / 8;
+
+ if (rdev->family <= CHIP_RS200) {
+ if ((tiling_flags & (RADEON_TILING_MACRO|RADEON_TILING_MICRO))
+ == (RADEON_TILING_MACRO|RADEON_TILING_MICRO))
+ flags |= RADEON_SURF_TILE_COLOR_BOTH;
+ if (tiling_flags & RADEON_TILING_MACRO)
+ flags |= RADEON_SURF_TILE_COLOR_MACRO;
+ } else if (rdev->family <= CHIP_RV280) {
+ if (tiling_flags & (RADEON_TILING_MACRO))
+ flags |= R200_SURF_TILE_COLOR_MACRO;
+ if (tiling_flags & RADEON_TILING_MICRO)
+ flags |= R200_SURF_TILE_COLOR_MICRO;
+ } else {
+ if (tiling_flags & RADEON_TILING_MACRO)
+ flags |= R300_SURF_TILE_MACRO;
+ if (tiling_flags & RADEON_TILING_MICRO)
+ flags |= R300_SURF_TILE_MICRO;
+ }
+
+ DRM_DEBUG("writing surface %d %d %x %x\n", reg, flags, offset, offset+obj_size-1);
+ WREG32(RADEON_SURFACE0_INFO + surf_index, flags);
+ WREG32(RADEON_SURFACE0_LOWER_BOUND + surf_index, offset);
+ WREG32(RADEON_SURFACE0_UPPER_BOUND + surf_index, offset + obj_size - 1);
+ return 0;
+}
+
+void r100_clear_surface_reg(struct radeon_device *rdev, int reg)
+{
+ int surf_index = reg * 16;
+ WREG32(RADEON_SURFACE0_INFO + surf_index, 0);
+}
+
+void r100_bandwidth_update(struct radeon_device *rdev)
+{
+ fixed20_12 trcd_ff, trp_ff, tras_ff, trbs_ff, tcas_ff;
+ fixed20_12 sclk_ff, mclk_ff, sclk_eff_ff, sclk_delay_ff;
+ fixed20_12 peak_disp_bw, mem_bw, pix_clk, pix_clk2, temp_ff, crit_point_ff;
+ uint32_t temp, data, mem_trcd, mem_trp, mem_tras;
+ fixed20_12 memtcas_ff[8] = {
+ fixed_init(1),
+ fixed_init(2),
+ fixed_init(3),
+ fixed_init(0),
+ fixed_init_half(1),
+ fixed_init_half(2),
+ fixed_init(0),
+ };
+ fixed20_12 memtcas_rs480_ff[8] = {
+ fixed_init(0),
+ fixed_init(1),
+ fixed_init(2),
+ fixed_init(3),
+ fixed_init(0),
+ fixed_init_half(1),
+ fixed_init_half(2),
+ fixed_init_half(3),
+ };
+ fixed20_12 memtcas2_ff[8] = {
+ fixed_init(0),
+ fixed_init(1),
+ fixed_init(2),
+ fixed_init(3),
+ fixed_init(4),
+ fixed_init(5),
+ fixed_init(6),
+ fixed_init(7),
+ };
+ fixed20_12 memtrbs[8] = {
+ fixed_init(1),
+ fixed_init_half(1),
+ fixed_init(2),
+ fixed_init_half(2),
+ fixed_init(3),
+ fixed_init_half(3),
+ fixed_init(4),
+ fixed_init_half(4)
+ };
+ fixed20_12 memtrbs_r4xx[8] = {
+ fixed_init(4),
+ fixed_init(5),
+ fixed_init(6),
+ fixed_init(7),
+ fixed_init(8),
+ fixed_init(9),
+ fixed_init(10),
+ fixed_init(11)
+ };
+ fixed20_12 min_mem_eff;
+ fixed20_12 mc_latency_sclk, mc_latency_mclk, k1;
+ fixed20_12 cur_latency_mclk, cur_latency_sclk;
+ fixed20_12 disp_latency, disp_latency_overhead, disp_drain_rate,
+ disp_drain_rate2, read_return_rate;
+ fixed20_12 time_disp1_drop_priority;
+ int c;
+ int cur_size = 16; /* in octawords */
+ int critical_point = 0, critical_point2;
+/* uint32_t read_return_rate, time_disp1_drop_priority; */
+ int stop_req, max_stop_req;
+ struct drm_display_mode *mode1 = NULL;
+ struct drm_display_mode *mode2 = NULL;
+ uint32_t pixel_bytes1 = 0;
+ uint32_t pixel_bytes2 = 0;
+
+ if (rdev->mode_info.crtcs[0]->base.enabled) {
+ mode1 = &rdev->mode_info.crtcs[0]->base.mode;
+ pixel_bytes1 = rdev->mode_info.crtcs[0]->base.fb->bits_per_pixel / 8;
+ }
+ if (rdev->mode_info.crtcs[1]->base.enabled) {
+ mode2 = &rdev->mode_info.crtcs[1]->base.mode;
+ pixel_bytes2 = rdev->mode_info.crtcs[1]->base.fb->bits_per_pixel / 8;
+ }
+
+ min_mem_eff.full = rfixed_const_8(0);
+ /* get modes */
+ if ((rdev->disp_priority == 2) && ASIC_IS_R300(rdev)) {
+ uint32_t mc_init_misc_lat_timer = RREG32(R300_MC_INIT_MISC_LAT_TIMER);
+ mc_init_misc_lat_timer &= ~(R300_MC_DISP1R_INIT_LAT_MASK << R300_MC_DISP1R_INIT_LAT_SHIFT);
+ mc_init_misc_lat_timer &= ~(R300_MC_DISP0R_INIT_LAT_MASK << R300_MC_DISP0R_INIT_LAT_SHIFT);
+ /* check crtc enables */
+ if (mode2)
+ mc_init_misc_lat_timer |= (1 << R300_MC_DISP1R_INIT_LAT_SHIFT);
+ if (mode1)
+ mc_init_misc_lat_timer |= (1 << R300_MC_DISP0R_INIT_LAT_SHIFT);
+ WREG32(R300_MC_INIT_MISC_LAT_TIMER, mc_init_misc_lat_timer);
+ }
+
+ /*
+ * determine is there is enough bw for current mode
+ */
+ mclk_ff.full = rfixed_const(rdev->clock.default_mclk);
+ temp_ff.full = rfixed_const(100);
+ mclk_ff.full = rfixed_div(mclk_ff, temp_ff);
+ sclk_ff.full = rfixed_const(rdev->clock.default_sclk);
+ sclk_ff.full = rfixed_div(sclk_ff, temp_ff);
+
+ temp = (rdev->mc.vram_width / 8) * (rdev->mc.vram_is_ddr ? 2 : 1);
+ temp_ff.full = rfixed_const(temp);
+ mem_bw.full = rfixed_mul(mclk_ff, temp_ff);
+
+ pix_clk.full = 0;
+ pix_clk2.full = 0;
+ peak_disp_bw.full = 0;
+ if (mode1) {
+ temp_ff.full = rfixed_const(1000);
+ pix_clk.full = rfixed_const(mode1->clock); /* convert to fixed point */
+ pix_clk.full = rfixed_div(pix_clk, temp_ff);
+ temp_ff.full = rfixed_const(pixel_bytes1);
+ peak_disp_bw.full += rfixed_mul(pix_clk, temp_ff);
+ }
+ if (mode2) {
+ temp_ff.full = rfixed_const(1000);
+ pix_clk2.full = rfixed_const(mode2->clock); /* convert to fixed point */
+ pix_clk2.full = rfixed_div(pix_clk2, temp_ff);
+ temp_ff.full = rfixed_const(pixel_bytes2);
+ peak_disp_bw.full += rfixed_mul(pix_clk2, temp_ff);
+ }
+
+ mem_bw.full = rfixed_mul(mem_bw, min_mem_eff);
+ if (peak_disp_bw.full >= mem_bw.full) {
+ DRM_ERROR("You may not have enough display bandwidth for current mode\n"
+ "If you have flickering problem, try to lower resolution, refresh rate, or color depth\n");
+ }
+
+ /* Get values from the EXT_MEM_CNTL register...converting its contents. */
+ temp = RREG32(RADEON_MEM_TIMING_CNTL);
+ if ((rdev->family == CHIP_RV100) || (rdev->flags & RADEON_IS_IGP)) { /* RV100, M6, IGPs */
+ mem_trcd = ((temp >> 2) & 0x3) + 1;
+ mem_trp = ((temp & 0x3)) + 1;
+ mem_tras = ((temp & 0x70) >> 4) + 1;
+ } else if (rdev->family == CHIP_R300 ||
+ rdev->family == CHIP_R350) { /* r300, r350 */
+ mem_trcd = (temp & 0x7) + 1;
+ mem_trp = ((temp >> 8) & 0x7) + 1;
+ mem_tras = ((temp >> 11) & 0xf) + 4;
+ } else if (rdev->family == CHIP_RV350 ||
+ rdev->family <= CHIP_RV380) {
+ /* rv3x0 */
+ mem_trcd = (temp & 0x7) + 3;
+ mem_trp = ((temp >> 8) & 0x7) + 3;
+ mem_tras = ((temp >> 11) & 0xf) + 6;
+ } else if (rdev->family == CHIP_R420 ||
+ rdev->family == CHIP_R423 ||
+ rdev->family == CHIP_RV410) {
+ /* r4xx */
+ mem_trcd = (temp & 0xf) + 3;
+ if (mem_trcd > 15)
+ mem_trcd = 15;
+ mem_trp = ((temp >> 8) & 0xf) + 3;
+ if (mem_trp > 15)
+ mem_trp = 15;
+ mem_tras = ((temp >> 12) & 0x1f) + 6;
+ if (mem_tras > 31)
+ mem_tras = 31;
+ } else { /* RV200, R200 */
+ mem_trcd = (temp & 0x7) + 1;
+ mem_trp = ((temp >> 8) & 0x7) + 1;
+ mem_tras = ((temp >> 12) & 0xf) + 4;
+ }
+ /* convert to FF */
+ trcd_ff.full = rfixed_const(mem_trcd);
+ trp_ff.full = rfixed_const(mem_trp);
+ tras_ff.full = rfixed_const(mem_tras);
+
+ /* Get values from the MEM_SDRAM_MODE_REG register...converting its */
+ temp = RREG32(RADEON_MEM_SDRAM_MODE_REG);
+ data = (temp & (7 << 20)) >> 20;
+ if ((rdev->family == CHIP_RV100) || rdev->flags & RADEON_IS_IGP) {
+ if (rdev->family == CHIP_RS480) /* don't think rs400 */
+ tcas_ff = memtcas_rs480_ff[data];
+ else
+ tcas_ff = memtcas_ff[data];
+ } else
+ tcas_ff = memtcas2_ff[data];
+
+ if (rdev->family == CHIP_RS400 ||
+ rdev->family == CHIP_RS480) {
+ /* extra cas latency stored in bits 23-25 0-4 clocks */
+ data = (temp >> 23) & 0x7;
+ if (data < 5)
+ tcas_ff.full += rfixed_const(data);
+ }
+
+ if (ASIC_IS_R300(rdev) && !(rdev->flags & RADEON_IS_IGP)) {
+ /* on the R300, Tcas is included in Trbs.
+ */
+ temp = RREG32(RADEON_MEM_CNTL);
+ data = (R300_MEM_NUM_CHANNELS_MASK & temp);
+ if (data == 1) {
+ if (R300_MEM_USE_CD_CH_ONLY & temp) {
+ temp = RREG32(R300_MC_IND_INDEX);
+ temp &= ~R300_MC_IND_ADDR_MASK;
+ temp |= R300_MC_READ_CNTL_CD_mcind;
+ WREG32(R300_MC_IND_INDEX, temp);
+ temp = RREG32(R300_MC_IND_DATA);
+ data = (R300_MEM_RBS_POSITION_C_MASK & temp);
+ } else {
+ temp = RREG32(R300_MC_READ_CNTL_AB);
+ data = (R300_MEM_RBS_POSITION_A_MASK & temp);
+ }
+ } else {
+ temp = RREG32(R300_MC_READ_CNTL_AB);
+ data = (R300_MEM_RBS_POSITION_A_MASK & temp);
+ }
+ if (rdev->family == CHIP_RV410 ||
+ rdev->family == CHIP_R420 ||
+ rdev->family == CHIP_R423)
+ trbs_ff = memtrbs_r4xx[data];
+ else
+ trbs_ff = memtrbs[data];
+ tcas_ff.full += trbs_ff.full;
+ }
+
+ sclk_eff_ff.full = sclk_ff.full;
+
+ if (rdev->flags & RADEON_IS_AGP) {
+ fixed20_12 agpmode_ff;
+ agpmode_ff.full = rfixed_const(radeon_agpmode);
+ temp_ff.full = rfixed_const_666(16);
+ sclk_eff_ff.full -= rfixed_mul(agpmode_ff, temp_ff);
+ }
+ /* TODO PCIE lanes may affect this - agpmode == 16?? */
+
+ if (ASIC_IS_R300(rdev)) {
+ sclk_delay_ff.full = rfixed_const(250);
+ } else {
+ if ((rdev->family == CHIP_RV100) ||
+ rdev->flags & RADEON_IS_IGP) {
+ if (rdev->mc.vram_is_ddr)
+ sclk_delay_ff.full = rfixed_const(41);
+ else
+ sclk_delay_ff.full = rfixed_const(33);
+ } else {
+ if (rdev->mc.vram_width == 128)
+ sclk_delay_ff.full = rfixed_const(57);
+ else
+ sclk_delay_ff.full = rfixed_const(41);
+ }
+ }
+
+ mc_latency_sclk.full = rfixed_div(sclk_delay_ff, sclk_eff_ff);
+
+ if (rdev->mc.vram_is_ddr) {
+ if (rdev->mc.vram_width == 32) {
+ k1.full = rfixed_const(40);
+ c = 3;
+ } else {
+ k1.full = rfixed_const(20);
+ c = 1;
+ }
+ } else {
+ k1.full = rfixed_const(40);
+ c = 3;
+ }
+
+ temp_ff.full = rfixed_const(2);
+ mc_latency_mclk.full = rfixed_mul(trcd_ff, temp_ff);
+ temp_ff.full = rfixed_const(c);
+ mc_latency_mclk.full += rfixed_mul(tcas_ff, temp_ff);
+ temp_ff.full = rfixed_const(4);
+ mc_latency_mclk.full += rfixed_mul(tras_ff, temp_ff);
+ mc_latency_mclk.full += rfixed_mul(trp_ff, temp_ff);
+ mc_latency_mclk.full += k1.full;
+
+ mc_latency_mclk.full = rfixed_div(mc_latency_mclk, mclk_ff);
+ mc_latency_mclk.full += rfixed_div(temp_ff, sclk_eff_ff);
+
+ /*
+ HW cursor time assuming worst case of full size colour cursor.
+ */
+ temp_ff.full = rfixed_const((2 * (cur_size - (rdev->mc.vram_is_ddr + 1))));
+ temp_ff.full += trcd_ff.full;
+ if (temp_ff.full < tras_ff.full)
+ temp_ff.full = tras_ff.full;
+ cur_latency_mclk.full = rfixed_div(temp_ff, mclk_ff);
+
+ temp_ff.full = rfixed_const(cur_size);
+ cur_latency_sclk.full = rfixed_div(temp_ff, sclk_eff_ff);
+ /*
+ Find the total latency for the display data.
+ */
+ disp_latency_overhead.full = rfixed_const(80);
+ disp_latency_overhead.full = rfixed_div(disp_latency_overhead, sclk_ff);
+ mc_latency_mclk.full += disp_latency_overhead.full + cur_latency_mclk.full;
+ mc_latency_sclk.full += disp_latency_overhead.full + cur_latency_sclk.full;
+
+ if (mc_latency_mclk.full > mc_latency_sclk.full)
+ disp_latency.full = mc_latency_mclk.full;
+ else
+ disp_latency.full = mc_latency_sclk.full;
+
+ /* setup Max GRPH_STOP_REQ default value */
+ if (ASIC_IS_RV100(rdev))
+ max_stop_req = 0x5c;
+ else
+ max_stop_req = 0x7c;
+
+ if (mode1) {
+ /* CRTC1
+ Set GRPH_BUFFER_CNTL register using h/w defined optimal values.
+ GRPH_STOP_REQ <= MIN[ 0x7C, (CRTC_H_DISP + 1) * (bit depth) / 0x10 ]
+ */
+ stop_req = mode1->hdisplay * pixel_bytes1 / 16;
+
+ if (stop_req > max_stop_req)
+ stop_req = max_stop_req;
+
+ /*
+ Find the drain rate of the display buffer.
+ */
+ temp_ff.full = rfixed_const((16/pixel_bytes1));
+ disp_drain_rate.full = rfixed_div(pix_clk, temp_ff);
+
+ /*
+ Find the critical point of the display buffer.
+ */
+ crit_point_ff.full = rfixed_mul(disp_drain_rate, disp_latency);
+ crit_point_ff.full += rfixed_const_half(0);
+
+ critical_point = rfixed_trunc(crit_point_ff);
+
+ if (rdev->disp_priority == 2) {
+ critical_point = 0;
+ }
+
+ /*
+ The critical point should never be above max_stop_req-4. Setting
+ GRPH_CRITICAL_CNTL = 0 will thus force high priority all the time.
+ */
+ if (max_stop_req - critical_point < 4)
+ critical_point = 0;
+
+ if (critical_point == 0 && mode2 && rdev->family == CHIP_R300) {
+ /* some R300 cards have problem with this set to 0, when CRTC2 is enabled.*/
+ critical_point = 0x10;
+ }
+
+ temp = RREG32(RADEON_GRPH_BUFFER_CNTL);
+ temp &= ~(RADEON_GRPH_STOP_REQ_MASK);
+ temp |= (stop_req << RADEON_GRPH_STOP_REQ_SHIFT);
+ temp &= ~(RADEON_GRPH_START_REQ_MASK);
+ if ((rdev->family == CHIP_R350) &&
+ (stop_req > 0x15)) {
+ stop_req -= 0x10;
+ }
+ temp |= (stop_req << RADEON_GRPH_START_REQ_SHIFT);
+ temp |= RADEON_GRPH_BUFFER_SIZE;
+ temp &= ~(RADEON_GRPH_CRITICAL_CNTL |
+ RADEON_GRPH_CRITICAL_AT_SOF |
+ RADEON_GRPH_STOP_CNTL);
+ /*
+ Write the result into the register.
+ */
+ WREG32(RADEON_GRPH_BUFFER_CNTL, ((temp & ~RADEON_GRPH_CRITICAL_POINT_MASK) |
+ (critical_point << RADEON_GRPH_CRITICAL_POINT_SHIFT)));
+
+#if 0
+ if ((rdev->family == CHIP_RS400) ||
+ (rdev->family == CHIP_RS480)) {
+ /* attempt to program RS400 disp regs correctly ??? */
+ temp = RREG32(RS400_DISP1_REG_CNTL);
+ temp &= ~(RS400_DISP1_START_REQ_LEVEL_MASK |
+ RS400_DISP1_STOP_REQ_LEVEL_MASK);
+ WREG32(RS400_DISP1_REQ_CNTL1, (temp |
+ (critical_point << RS400_DISP1_START_REQ_LEVEL_SHIFT) |
+ (critical_point << RS400_DISP1_STOP_REQ_LEVEL_SHIFT)));
+ temp = RREG32(RS400_DMIF_MEM_CNTL1);
+ temp &= ~(RS400_DISP1_CRITICAL_POINT_START_MASK |
+ RS400_DISP1_CRITICAL_POINT_STOP_MASK);
+ WREG32(RS400_DMIF_MEM_CNTL1, (temp |
+ (critical_point << RS400_DISP1_CRITICAL_POINT_START_SHIFT) |
+ (critical_point << RS400_DISP1_CRITICAL_POINT_STOP_SHIFT)));
+ }
+#endif
+
+ DRM_DEBUG("GRPH_BUFFER_CNTL from to %x\n",
+ /* (unsigned int)info->SavedReg->grph_buffer_cntl, */
+ (unsigned int)RREG32(RADEON_GRPH_BUFFER_CNTL));
+ }
+
+ if (mode2) {
+ u32 grph2_cntl;
+ stop_req = mode2->hdisplay * pixel_bytes2 / 16;
+
+ if (stop_req > max_stop_req)
+ stop_req = max_stop_req;
+
+ /*
+ Find the drain rate of the display buffer.
+ */
+ temp_ff.full = rfixed_const((16/pixel_bytes2));
+ disp_drain_rate2.full = rfixed_div(pix_clk2, temp_ff);
+
+ grph2_cntl = RREG32(RADEON_GRPH2_BUFFER_CNTL);
+ grph2_cntl &= ~(RADEON_GRPH_STOP_REQ_MASK);
+ grph2_cntl |= (stop_req << RADEON_GRPH_STOP_REQ_SHIFT);
+ grph2_cntl &= ~(RADEON_GRPH_START_REQ_MASK);
+ if ((rdev->family == CHIP_R350) &&
+ (stop_req > 0x15)) {
+ stop_req -= 0x10;
+ }
+ grph2_cntl |= (stop_req << RADEON_GRPH_START_REQ_SHIFT);
+ grph2_cntl |= RADEON_GRPH_BUFFER_SIZE;
+ grph2_cntl &= ~(RADEON_GRPH_CRITICAL_CNTL |
+ RADEON_GRPH_CRITICAL_AT_SOF |
+ RADEON_GRPH_STOP_CNTL);
+
+ if ((rdev->family == CHIP_RS100) ||
+ (rdev->family == CHIP_RS200))
+ critical_point2 = 0;
+ else {
+ temp = (rdev->mc.vram_width * rdev->mc.vram_is_ddr + 1)/128;
+ temp_ff.full = rfixed_const(temp);
+ temp_ff.full = rfixed_mul(mclk_ff, temp_ff);
+ if (sclk_ff.full < temp_ff.full)
+ temp_ff.full = sclk_ff.full;
+
+ read_return_rate.full = temp_ff.full;
+
+ if (mode1) {
+ temp_ff.full = read_return_rate.full - disp_drain_rate.full;
+ time_disp1_drop_priority.full = rfixed_div(crit_point_ff, temp_ff);
+ } else {
+ time_disp1_drop_priority.full = 0;
+ }
+ crit_point_ff.full = disp_latency.full + time_disp1_drop_priority.full + disp_latency.full;
+ crit_point_ff.full = rfixed_mul(crit_point_ff, disp_drain_rate2);
+ crit_point_ff.full += rfixed_const_half(0);
+
+ critical_point2 = rfixed_trunc(crit_point_ff);
+
+ if (rdev->disp_priority == 2) {
+ critical_point2 = 0;
+ }
+
+ if (max_stop_req - critical_point2 < 4)
+ critical_point2 = 0;
+
+ }
+
+ if (critical_point2 == 0 && rdev->family == CHIP_R300) {
+ /* some R300 cards have problem with this set to 0 */
+ critical_point2 = 0x10;
+ }
+
+ WREG32(RADEON_GRPH2_BUFFER_CNTL, ((grph2_cntl & ~RADEON_GRPH_CRITICAL_POINT_MASK) |
+ (critical_point2 << RADEON_GRPH_CRITICAL_POINT_SHIFT)));
+
+ if ((rdev->family == CHIP_RS400) ||
+ (rdev->family == CHIP_RS480)) {
+#if 0
+ /* attempt to program RS400 disp2 regs correctly ??? */
+ temp = RREG32(RS400_DISP2_REQ_CNTL1);
+ temp &= ~(RS400_DISP2_START_REQ_LEVEL_MASK |
+ RS400_DISP2_STOP_REQ_LEVEL_MASK);
+ WREG32(RS400_DISP2_REQ_CNTL1, (temp |
+ (critical_point2 << RS400_DISP1_START_REQ_LEVEL_SHIFT) |
+ (critical_point2 << RS400_DISP1_STOP_REQ_LEVEL_SHIFT)));
+ temp = RREG32(RS400_DISP2_REQ_CNTL2);
+ temp &= ~(RS400_DISP2_CRITICAL_POINT_START_MASK |
+ RS400_DISP2_CRITICAL_POINT_STOP_MASK);
+ WREG32(RS400_DISP2_REQ_CNTL2, (temp |
+ (critical_point2 << RS400_DISP2_CRITICAL_POINT_START_SHIFT) |
+ (critical_point2 << RS400_DISP2_CRITICAL_POINT_STOP_SHIFT)));
+#endif
+ WREG32(RS400_DISP2_REQ_CNTL1, 0x105DC1CC);
+ WREG32(RS400_DISP2_REQ_CNTL2, 0x2749D000);
+ WREG32(RS400_DMIF_MEM_CNTL1, 0x29CA71DC);
+ WREG32(RS400_DISP1_REQ_CNTL1, 0x28FBC3AC);
+ }
+
+ DRM_DEBUG("GRPH2_BUFFER_CNTL from to %x\n",
+ (unsigned int)RREG32(RADEON_GRPH2_BUFFER_CNTL));
+ }
+}
#include "drm.h"
#include "radeon_reg.h"
#include "radeon.h"
+#include "radeon_drm.h"
+#include "radeon_share.h"
/* r300,r350,rv350,rv370,rv380 depends on : */
void r100_hdp_reset(struct radeon_device *rdev);
int r100_cs_packet_parse(struct radeon_cs_parser *p,
struct radeon_cs_packet *pkt,
unsigned idx);
+int r100_cs_packet_parse_vline(struct radeon_cs_parser *p);
int r100_cs_packet_next_reloc(struct radeon_cs_parser *p,
struct radeon_cs_reloc **cs_reloc);
int r100_cs_parse_packet0(struct radeon_cs_parser *p,
WREG32_PCIE(RADEON_PCIE_TX_GART_CNTL, tmp | RADEON_PCIE_TX_GART_INVALIDATE_TLB);
(void)RREG32_PCIE(RADEON_PCIE_TX_GART_CNTL);
WREG32_PCIE(RADEON_PCIE_TX_GART_CNTL, tmp);
- mb();
}
+ mb();
}
int rv370_pcie_gart_enable(struct radeon_device *rdev)
if (i < 0 || i > rdev->gart.num_gpu_pages) {
return -EINVAL;
}
- addr = (((u32)addr) >> 8) | ((upper_32_bits(addr) & 0xff) << 4) | 0xC;
- writel(cpu_to_le32(addr), ((void __iomem *)ptr) + (i * 4));
+ addr = (lower_32_bits(addr) >> 8) |
+ ((upper_32_bits(addr) & 0xff) << 24) |
+ 0xc;
+ /* on x86 we want this to be CPU endian, on powerpc
+ * on powerpc without HW swappers, it'll get swapped on way
+ * into VRAM - so no need for cpu_to_le32 on VRAM tables */
+ writel(addr, ((void __iomem *)ptr) + (i * 4));
return 0;
}
/* rv350,rv370,rv380 */
rdev->num_gb_pipes = 1;
}
+ rdev->num_z_pipes = 1;
gb_tile_config = (R300_ENABLE_TILING | R300_TILE_SIZE_16);
switch (rdev->num_gb_pipes) {
case 2:
printk(KERN_WARNING "Failed to wait MC idle while "
"programming pipes. Bad things might happen.\n");
}
- DRM_INFO("radeon: %d pipes initialized.\n", rdev->num_gb_pipes);
+ DRM_INFO("radeon: %d quad pipes, %d Z pipes initialized.\n",
+ rdev->num_gb_pipes, rdev->num_z_pipes);
}
int r300_ga_reset(struct radeon_device *rdev)
} else {
rdev->mc.vram_width = 64;
}
- rdev->mc.vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
- rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
- rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+ r100_vram_init_sizes(rdev);
}
-/*
- * Indirect registers accessor
- */
-uint32_t rv370_pcie_rreg(struct radeon_device *rdev, uint32_t reg)
-{
- uint32_t r;
-
- WREG8(RADEON_PCIE_INDEX, ((reg) & 0xff));
- (void)RREG32(RADEON_PCIE_INDEX);
- r = RREG32(RADEON_PCIE_DATA);
- return r;
-}
-
-void rv370_pcie_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
-{
- WREG8(RADEON_PCIE_INDEX, ((reg) & 0xff));
- (void)RREG32(RADEON_PCIE_INDEX);
- WREG32(RADEON_PCIE_DATA, (v));
- (void)RREG32(RADEON_PCIE_DATA);
-}
-
/*
* PCIE Lanes
*/
static const unsigned r300_reg_safe_bm[159] = {
0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
- 0xFFFFFFBF, 0xFFFFFFFF, 0xFFFFFFBF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
0x00000000, 0x00000000, 0x00000000, 0x00000000,
0x00000000, 0xFFFF0000, 0xFFFFFFFF, 0xFF80FFFF,
0x00000000, 0x00000000, 0x00000000, 0x00000000,
- 0x0003FC01, 0xFFFFFFF8, 0xFE800B19,
+ 0x0003FC01, 0xFFFFFCF8, 0xFF800B19,
};
static int r300_packet0_check(struct radeon_cs_parser *p,
struct radeon_cs_reloc *reloc;
struct r300_cs_track *track;
volatile uint32_t *ib;
- uint32_t tmp;
+ uint32_t tmp, tile_flags = 0;
unsigned i;
int r;
ib_chunk = &p->chunks[p->chunk_ib_idx];
track = (struct r300_cs_track*)p->track;
switch(reg) {
+ case AVIVO_D1MODE_VLINE_START_END:
+ case RADEON_CRTC_GUI_TRIG_VLINE:
+ r = r100_cs_packet_parse_vline(p);
+ if (r) {
+ DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+ idx, reg);
+ r100_cs_dump_packet(p, pkt);
+ return r;
+ }
+ break;
case RADEON_DST_PITCH_OFFSET:
case RADEON_SRC_PITCH_OFFSET:
r = r100_cs_packet_next_reloc(p, &reloc);
}
tmp = ib_chunk->kdata[idx] & 0x003fffff;
tmp += (((u32)reloc->lobj.gpu_offset) >> 10);
- ib[idx] = (ib_chunk->kdata[idx] & 0xffc00000) | tmp;
+
+ if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
+ tile_flags |= RADEON_DST_TILE_MACRO;
+ if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) {
+ if (reg == RADEON_SRC_PITCH_OFFSET) {
+ DRM_ERROR("Cannot src blit from microtiled surface\n");
+ r100_cs_dump_packet(p, pkt);
+ return -EINVAL;
+ }
+ tile_flags |= RADEON_DST_TILE_MICRO;
+ }
+ tmp |= tile_flags;
+ ib[idx] = (ib_chunk->kdata[idx] & 0x3fc00000) | tmp;
break;
case R300_RB3D_COLOROFFSET0:
case R300_RB3D_COLOROFFSET1:
/* RB3D_COLORPITCH1 */
/* RB3D_COLORPITCH2 */
/* RB3D_COLORPITCH3 */
+ r = r100_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+ idx, reg);
+ r100_cs_dump_packet(p, pkt);
+ return r;
+ }
+
+ if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
+ tile_flags |= R300_COLOR_TILE_ENABLE;
+ if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
+ tile_flags |= R300_COLOR_MICROTILE_ENABLE;
+
+ tmp = ib_chunk->kdata[idx] & ~(0x7 << 16);
+ tmp |= tile_flags;
+ ib[idx] = tmp;
+
i = (reg - 0x4E38) >> 2;
track->cb[i].pitch = ib_chunk->kdata[idx] & 0x3FFE;
switch (((ib_chunk->kdata[idx] >> 21) & 0xF)) {
break;
case 0x4F24:
/* ZB_DEPTHPITCH */
+ r = r100_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+ idx, reg);
+ r100_cs_dump_packet(p, pkt);
+ return r;
+ }
+
+ if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
+ tile_flags |= R300_DEPTHMACROTILE_ENABLE;
+ if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
+ tile_flags |= R300_DEPTHMICROTILE_TILED;;
+
+ tmp = ib_chunk->kdata[idx] & ~(0x7 << 16);
+ tmp |= tile_flags;
+ ib[idx] = tmp;
+
track->zb.pitch = ib_chunk->kdata[idx] & 0x3FFC;
break;
case 0x4104:
tmp = (ib_chunk->kdata[idx] >> 22) & 0xF;
track->textures[i].txdepth = tmp;
break;
+ case R300_ZB_ZPASS_ADDR:
+ r = r100_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+ idx, reg);
+ r100_cs_dump_packet(p, pkt);
+ return r;
+ }
+ ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+ break;
+ case 0x4be8:
+ /* valid register only on RV530 */
+ if (p->rdev->family == CHIP_RV530)
+ break;
+ /* fallthrough do not move */
default:
printk(KERN_ERR "Forbidden register 0x%04X in cs at %d\n",
reg, idx);
#ifndef _R300_REG_H_
#define _R300_REG_H_
-
+#define R300_SURF_TILE_MACRO (1<<16)
+#define R300_SURF_TILE_MICRO (2<<16)
+#define R300_SURF_TILE_BOTH (3<<16)
#define R300_MC_INIT_MISC_LAT_TIMER 0x180
printk(KERN_WARNING "Failed to wait GUI idle while "
"programming pipes. Bad things might happen.\n");
}
- DRM_INFO("radeon: %d pipes initialized.\n", rdev->num_gb_pipes);
+
+ if (rdev->family == CHIP_RV530) {
+ tmp = RREG32(RV530_GB_PIPE_SELECT2);
+ if ((tmp & 3) == 3)
+ rdev->num_z_pipes = 2;
+ else
+ rdev->num_z_pipes = 1;
+ } else
+ rdev->num_z_pipes = 1;
+
+ DRM_INFO("radeon: %d quad pipes, %d z pipes initialized.\n",
+ rdev->num_gb_pipes, rdev->num_z_pipes);
}
void r420_gpu_init(struct radeon_device *rdev)
#define AVIVO_D1CRTC_BLANK_CONTROL 0x6084
#define AVIVO_D1CRTC_INTERLACE_CONTROL 0x6088
#define AVIVO_D1CRTC_INTERLACE_STATUS 0x608c
+#define AVIVO_D1CRTC_FRAME_COUNT 0x60a4
#define AVIVO_D1CRTC_STEREO_CONTROL 0x60c4
/* master controls */
# define AVIVO_DC_LB_DISP1_END_ADR_SHIFT 4
# define AVIVO_DC_LB_DISP1_END_ADR_MASK 0x7ff
-#define R500_DxMODE_INT_MASK 0x6540
-#define R500_D1MODE_INT_MASK (1<<0)
-#define R500_D2MODE_INT_MASK (1<<8)
-
#define AVIVO_D1MODE_DATA_FORMAT 0x6528
# define AVIVO_D1MODE_INTERLEAVE_EN (1 << 0)
#define AVIVO_D1MODE_DESKTOP_HEIGHT 0x652C
+#define AVIVO_D1MODE_VBLANK_STATUS 0x6534
+# define AVIVO_VBLANK_ACK (1 << 4)
+#define AVIVO_D1MODE_VLINE_START_END 0x6538
+#define AVIVO_DxMODE_INT_MASK 0x6540
+# define AVIVO_D1MODE_INT_MASK (1 << 0)
+# define AVIVO_D2MODE_INT_MASK (1 << 8)
#define AVIVO_D1MODE_VIEWPORT_START 0x6580
#define AVIVO_D1MODE_VIEWPORT_SIZE 0x6584
#define AVIVO_D1MODE_EXT_OVERSCAN_LEFT_RIGHT 0x6588
#define AVIVO_D2CRTC_BLANK_CONTROL 0x6884
#define AVIVO_D2CRTC_INTERLACE_CONTROL 0x6888
#define AVIVO_D2CRTC_INTERLACE_STATUS 0x688c
+#define AVIVO_D2CRTC_FRAME_COUNT 0x68a4
#define AVIVO_D2CRTC_STEREO_CONTROL 0x68c4
#define AVIVO_D2GRPH_ENABLE 0x6900
#define AVIVO_D2CUR_SIZE 0x6c10
#define AVIVO_D2CUR_POSITION 0x6c14
+#define AVIVO_D2MODE_VBLANK_STATUS 0x6d34
+#define AVIVO_D2MODE_VLINE_START_END 0x6d38
#define AVIVO_D2MODE_VIEWPORT_START 0x6d80
#define AVIVO_D2MODE_VIEWPORT_SIZE 0x6d84
#define AVIVO_D2MODE_EXT_OVERSCAN_LEFT_RIGHT 0x6d88
# define AVIVO_I2C_EN (1 << 0)
# define AVIVO_I2C_RESET (1 << 8)
+#define AVIVO_DISP_INTERRUPT_STATUS 0x7edc
+# define AVIVO_D1_VBLANK_INTERRUPT (1 << 4)
+# define AVIVO_D2_VBLANK_INTERRUPT (1 << 5)
+
#endif
#include "drmP.h"
#include "radeon_reg.h"
#include "radeon.h"
+#include "radeon_share.h"
/* r520,rv530,rv560,rv570,r580 depends on : */
void r100_hdp_reset(struct radeon_device *rdev);
"programming pipes. Bad things might happen.\n");
}
/* Write VRAM size in case we are limiting it */
- WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size);
- tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+ WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
+ tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
tmp = REG_SET(R520_MC_FB_TOP, tmp >> 16);
tmp |= REG_SET(R520_MC_FB_START, rdev->mc.vram_location >> 16);
WREG32_MC(R520_MC_FB_LOCATION, tmp);
*/
/* workaround for RV530 */
if (rdev->family == CHIP_RV530) {
- WREG32(0x4124, 1);
WREG32(0x4128, 0xFF);
}
r420_pipes_init(rdev);
void r520_vram_info(struct radeon_device *rdev)
{
+ fixed20_12 a;
+
r520_vram_get_type(rdev);
- rdev->mc.vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
- rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
- rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+ r100_vram_init_sizes(rdev);
+ /* FIXME: we should enforce default clock in case GPU is not in
+ * default setup
+ */
+ a.full = rfixed_const(100);
+ rdev->pm.sclk.full = rfixed_const(rdev->clock.default_sclk);
+ rdev->pm.sclk.full = rfixed_div(rdev->pm.sclk, a);
+}
+
+void r520_bandwidth_update(struct radeon_device *rdev)
+{
+ rv515_bandwidth_avivo_update(rdev);
}
"programming pipes. Bad things might happen.\n");
}
- tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+ tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
tmp = REG_SET(R600_MC_FB_TOP, tmp >> 24);
tmp |= REG_SET(R600_MC_FB_BASE, rdev->mc.vram_location >> 24);
WREG32(R600_MC_VM_FB_LOCATION, tmp);
void r600_vram_info(struct radeon_device *rdev)
{
r600_vram_get_type(rdev);
- rdev->mc.vram_size = RREG32(R600_CONFIG_MEMSIZE);
+ rdev->mc.real_vram_size = RREG32(R600_CONFIG_MEMSIZE);
+ rdev->mc.mc_vram_size = rdev->mc.real_vram_size;
/* Could aper size report 0 ? */
rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
DRM_INFO("Loading RV670 PFP Microcode\n");
for (i = 0; i < PFP_UCODE_SIZE; i++)
RADEON_WRITE(R600_CP_PFP_UCODE_DATA, RV670_pfp_microcode[i]);
- } else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS780)) {
- DRM_INFO("Loading RS780 CP Microcode\n");
+ } else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS780) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS880)) {
+ DRM_INFO("Loading RS780/RS880 CP Microcode\n");
for (i = 0; i < PM4_UCODE_SIZE; i++) {
RADEON_WRITE(R600_CP_ME_RAM_DATA,
RS780_cp_microcode[i][0]);
}
RADEON_WRITE(R600_CP_PFP_UCODE_ADDR, 0);
- DRM_INFO("Loading RS780 PFP Microcode\n");
+ DRM_INFO("Loading RS780/RS880 PFP Microcode\n");
for (i = 0; i < PFP_UCODE_SIZE; i++)
RADEON_WRITE(R600_CP_PFP_UCODE_DATA, RS780_pfp_microcode[i]);
}
break;
case CHIP_RV610:
case CHIP_RS780:
+ case CHIP_RS880:
case CHIP_RV620:
dev_priv->r600_max_pipes = 1;
dev_priv->r600_max_tile_pipes = 1;
((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV630) ||
((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV610) ||
((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV620) ||
- ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS780))
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS780) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS880))
RADEON_WRITE(R600_DB_DEBUG, R600_PREZ_MUST_WAIT_FOR_POSTZ_DONE);
else
RADEON_WRITE(R600_DB_DEBUG, 0);
sq_ms_fifo_sizes = RADEON_READ(R600_SQ_MS_FIFO_SIZES);
if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV610) ||
((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV620) ||
- ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS780)) {
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS780) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS880)) {
sq_ms_fifo_sizes = (R600_CACHE_FIFO_SIZE(0xa) |
R600_FETCH_FIFO_HIWATER(0xa) |
R600_DONE_FIFO_HIWATER(0xe0) |
R600_NUM_ES_STACK_ENTRIES(0));
} else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV610) ||
((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV620) ||
- ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS780)) {
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS780) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS880)) {
/* no vertex cache */
sq_config &= ~R600_VC_ENABLE;
if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV610) ||
((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV620) ||
- ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS780))
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS780) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS880))
RADEON_WRITE(R600_VGT_CACHE_INVALIDATION, R600_CACHE_INVALIDATION(R600_TC_ONLY));
else
RADEON_WRITE(R600_VGT_CACHE_INVALIDATION, R600_CACHE_INVALIDATION(R600_VC_AND_TC));
break;
case CHIP_RV610:
case CHIP_RS780:
+ case CHIP_RS880:
case CHIP_RV620:
gs_prim_buffer_depth = 32;
break;
switch (dev_priv->flags & RADEON_FAMILY_MASK) {
case CHIP_RV610:
case CHIP_RS780:
+ case CHIP_RS880:
case CHIP_RV620:
tc_cntl = R600_TC_L2_SIZE(8);
break;
extern int radeon_vram_limit;
extern int radeon_gart_size;
extern int radeon_benchmarking;
+extern int radeon_testing;
extern int radeon_connector_table;
/*
CHIP_RV770,
CHIP_RV730,
CHIP_RV710,
+ CHIP_RS880,
CHIP_LAST,
};
struct radeon_fence *radeon_fence_ref(struct radeon_fence *fence);
void radeon_fence_unref(struct radeon_fence **fence);
+/*
+ * Tiling registers
+ */
+struct radeon_surface_reg {
+ struct radeon_object *robj;
+};
+
+#define RADEON_GEM_MAX_SURFACES 8
/*
* Radeon buffer.
uint64_t gpu_offset;
unsigned rdomain;
unsigned wdomain;
+ uint32_t tiling_flags;
};
int radeon_object_init(struct radeon_device *rdev);
uint64_t *gpu_addr);
void radeon_object_unpin(struct radeon_object *robj);
int radeon_object_wait(struct radeon_object *robj);
+int radeon_object_busy_domain(struct radeon_object *robj, uint32_t *cur_placement);
int radeon_object_evict_vram(struct radeon_device *rdev);
int radeon_object_mmap(struct radeon_object *robj, uint64_t *offset);
void radeon_object_force_delete(struct radeon_device *rdev);
int radeon_object_fbdev_mmap(struct radeon_object *robj,
struct vm_area_struct *vma);
unsigned long radeon_object_size(struct radeon_object *robj);
-
-
+void radeon_object_clear_surface_reg(struct radeon_object *robj);
+int radeon_object_check_tiling(struct radeon_object *robj, bool has_moved,
+ bool force_drop);
+void radeon_object_set_tiling_flags(struct radeon_object *robj,
+ uint32_t tiling_flags, uint32_t pitch);
+void radeon_object_get_tiling_flags(struct radeon_object *robj, uint32_t *tiling_flags, uint32_t *pitch);
+void radeon_bo_move_notify(struct ttm_buffer_object *bo,
+ struct ttm_mem_reg *mem);
+void radeon_bo_fault_reserve_notify(struct ttm_buffer_object *bo);
/*
* GEM objects.
*/
unsigned gtt_location;
unsigned gtt_size;
unsigned vram_location;
- unsigned vram_size;
+ /* for some chips with <= 32MB we need to lie
+ * about vram size near mc fb location */
+ unsigned mc_vram_size;
unsigned vram_width;
+ unsigned real_vram_size;
int vram_mtrr;
bool vram_is_ddr;
};
uint64_t gpu_addr;
};
+/**
+ * struct radeon_pm - power management datas
+ * @max_bandwidth: maximum bandwidth the gpu has (MByte/s)
+ * @igp_sideport_mclk: sideport memory clock Mhz (rs690,rs740,rs780,rs880)
+ * @igp_system_mclk: system clock Mhz (rs690,rs740,rs780,rs880)
+ * @igp_ht_link_clk: ht link clock Mhz (rs690,rs740,rs780,rs880)
+ * @igp_ht_link_width: ht link width in bits (rs690,rs740,rs780,rs880)
+ * @k8_bandwidth: k8 bandwidth the gpu has (MByte/s) (IGP)
+ * @sideport_bandwidth: sideport bandwidth the gpu has (MByte/s) (IGP)
+ * @ht_bandwidth: ht bandwidth the gpu has (MByte/s) (IGP)
+ * @core_bandwidth: core GPU bandwidth the gpu has (MByte/s) (IGP)
+ * @sclk: GPU clock Mhz (core bandwith depends of this clock)
+ * @needed_bandwidth: current bandwidth needs
+ *
+ * It keeps track of various data needed to take powermanagement decision.
+ * Bandwith need is used to determine minimun clock of the GPU and memory.
+ * Equation between gpu/memory clock and available bandwidth is hw dependent
+ * (type of memory, bus size, efficiency, ...)
+ */
+struct radeon_pm {
+ fixed20_12 max_bandwidth;
+ fixed20_12 igp_sideport_mclk;
+ fixed20_12 igp_system_mclk;
+ fixed20_12 igp_ht_link_clk;
+ fixed20_12 igp_ht_link_width;
+ fixed20_12 k8_bandwidth;
+ fixed20_12 sideport_bandwidth;
+ fixed20_12 ht_bandwidth;
+ fixed20_12 core_bandwidth;
+ fixed20_12 sclk;
+ fixed20_12 needed_bandwidth;
+};
+
/*
* Benchmarking
void radeon_benchmark(struct radeon_device *rdev);
+/*
+ * Testing
+ */
+void radeon_test_moves(struct radeon_device *rdev);
+
+
/*
* Debugfs
*/
void (*ring_start)(struct radeon_device *rdev);
int (*irq_set)(struct radeon_device *rdev);
int (*irq_process)(struct radeon_device *rdev);
+ u32 (*get_vblank_counter)(struct radeon_device *rdev, int crtc);
void (*fence_ring_emit)(struct radeon_device *rdev, struct radeon_fence *fence);
int (*cs_parse)(struct radeon_cs_parser *p);
int (*copy_blit)(struct radeon_device *rdev,
void (*set_memory_clock)(struct radeon_device *rdev, uint32_t mem_clock);
void (*set_pcie_lanes)(struct radeon_device *rdev, int lanes);
void (*set_clock_gating)(struct radeon_device *rdev, int enable);
+ int (*set_surface_reg)(struct radeon_device *rdev, int reg,
+ uint32_t tiling_flags, uint32_t pitch,
+ uint32_t offset, uint32_t obj_size);
+ int (*clear_surface_reg)(struct radeon_device *rdev, int reg);
+ void (*bandwidth_update)(struct radeon_device *rdev);
};
union radeon_asic_config {
int radeon_gem_wait_idle_ioctl(struct drm_device *dev, void *data,
struct drm_file *filp);
int radeon_cs_ioctl(struct drm_device *dev, void *data, struct drm_file *filp);
+int radeon_gem_set_tiling_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *filp);
+int radeon_gem_get_tiling_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *filp);
/*
int usec_timeout;
enum radeon_pll_errata pll_errata;
int num_gb_pipes;
+ int num_z_pipes;
int disp_priority;
/* BIOS */
uint8_t *bios;
struct radeon_object *fbdev_robj;
struct radeon_framebuffer *fbdev_rfb;
/* Register mmio */
- unsigned long rmmio_base;
- unsigned long rmmio_size;
+ resource_size_t rmmio_base;
+ resource_size_t rmmio_size;
void *rmmio;
- radeon_rreg_t mm_rreg;
- radeon_wreg_t mm_wreg;
radeon_rreg_t mc_rreg;
radeon_wreg_t mc_wreg;
radeon_rreg_t pll_rreg;
radeon_wreg_t pll_wreg;
- radeon_rreg_t pcie_rreg;
- radeon_wreg_t pcie_wreg;
+ uint32_t pcie_reg_mask;
radeon_rreg_t pciep_rreg;
radeon_wreg_t pciep_wreg;
struct radeon_clock clock;
struct radeon_irq irq;
struct radeon_asic *asic;
struct radeon_gem gem;
+ struct radeon_pm pm;
struct mutex cs_mutex;
struct radeon_wb wb;
bool gpu_lockup;
bool shutdown;
bool suspend;
+ bool need_dma32;
+ struct radeon_surface_reg surface_regs[RADEON_GEM_MAX_SURFACES];
};
int radeon_device_init(struct radeon_device *rdev,
void radeon_device_fini(struct radeon_device *rdev);
int radeon_gpu_wait_for_idle(struct radeon_device *rdev);
+static inline uint32_t r100_mm_rreg(struct radeon_device *rdev, uint32_t reg)
+{
+ if (reg < 0x10000)
+ return readl(((void __iomem *)rdev->rmmio) + reg);
+ else {
+ writel(reg, ((void __iomem *)rdev->rmmio) + RADEON_MM_INDEX);
+ return readl(((void __iomem *)rdev->rmmio) + RADEON_MM_DATA);
+ }
+}
+
+static inline void r100_mm_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
+{
+ if (reg < 0x10000)
+ writel(v, ((void __iomem *)rdev->rmmio) + reg);
+ else {
+ writel(reg, ((void __iomem *)rdev->rmmio) + RADEON_MM_INDEX);
+ writel(v, ((void __iomem *)rdev->rmmio) + RADEON_MM_DATA);
+ }
+}
+
/*
* Registers read & write functions.
*/
#define RREG8(reg) readb(((void __iomem *)rdev->rmmio) + (reg))
#define WREG8(reg, v) writeb(v, ((void __iomem *)rdev->rmmio) + (reg))
-#define RREG32(reg) rdev->mm_rreg(rdev, (reg))
-#define WREG32(reg, v) rdev->mm_wreg(rdev, (reg), (v))
+#define RREG32(reg) r100_mm_rreg(rdev, (reg))
+#define WREG32(reg, v) r100_mm_wreg(rdev, (reg), (v))
#define REG_SET(FIELD, v) (((v) << FIELD##_SHIFT) & FIELD##_MASK)
#define REG_GET(FIELD, v) (((v) << FIELD##_SHIFT) & FIELD##_MASK)
#define RREG32_PLL(reg) rdev->pll_rreg(rdev, (reg))
#define WREG32_PLL(reg, v) rdev->pll_wreg(rdev, (reg), (v))
#define RREG32_MC(reg) rdev->mc_rreg(rdev, (reg))
#define WREG32_MC(reg, v) rdev->mc_wreg(rdev, (reg), (v))
-#define RREG32_PCIE(reg) rdev->pcie_rreg(rdev, (reg))
-#define WREG32_PCIE(reg, v) rdev->pcie_wreg(rdev, (reg), (v))
+#define RREG32_PCIE(reg) rv370_pcie_rreg(rdev, (reg))
+#define WREG32_PCIE(reg, v) rv370_pcie_wreg(rdev, (reg), (v))
#define WREG32_P(reg, val, mask) \
do { \
uint32_t tmp_ = RREG32(reg); \
WREG32_PLL(reg, tmp_); \
} while (0)
+/*
+ * Indirect registers accessor
+ */
+static inline uint32_t rv370_pcie_rreg(struct radeon_device *rdev, uint32_t reg)
+{
+ uint32_t r;
+
+ WREG32(RADEON_PCIE_INDEX, ((reg) & rdev->pcie_reg_mask));
+ r = RREG32(RADEON_PCIE_DATA);
+ return r;
+}
+
+static inline void rv370_pcie_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
+{
+ WREG32(RADEON_PCIE_INDEX, ((reg) & rdev->pcie_reg_mask));
+ WREG32(RADEON_PCIE_DATA, (v));
+}
+
void r100_pll_errata_after_index(struct radeon_device *rdev);
/*
* ASICs helpers.
*/
+#define ASIC_IS_RN50(rdev) ((rdev->pdev->device == 0x515e) || \
+ (rdev->pdev->device == 0x5969))
#define ASIC_IS_RV100(rdev) ((rdev->family == CHIP_RV100) || \
(rdev->family == CHIP_RV200) || \
(rdev->family == CHIP_RS100) || \
#define radeon_ring_start(rdev) (rdev)->asic->ring_start((rdev))
#define radeon_irq_set(rdev) (rdev)->asic->irq_set((rdev))
#define radeon_irq_process(rdev) (rdev)->asic->irq_process((rdev))
+#define radeon_get_vblank_counter(rdev, crtc) (rdev)->asic->get_vblank_counter((rdev), (crtc))
#define radeon_fence_ring_emit(rdev, fence) (rdev)->asic->fence_ring_emit((rdev), (fence))
#define radeon_copy_blit(rdev, s, d, np, f) (rdev)->asic->copy_blit((rdev), (s), (d), (np), (f))
#define radeon_copy_dma(rdev, s, d, np, f) (rdev)->asic->copy_dma((rdev), (s), (d), (np), (f))
#define radeon_set_memory_clock(rdev, e) (rdev)->asic->set_engine_clock((rdev), (e))
#define radeon_set_pcie_lanes(rdev, l) (rdev)->asic->set_pcie_lanes((rdev), (l))
#define radeon_set_clock_gating(rdev, e) (rdev)->asic->set_clock_gating((rdev), (e))
+#define radeon_set_surface_reg(rdev, r, f, p, o, s) ((rdev)->asic->set_surface_reg((rdev), (r), (f), (p), (o), (s)))
+#define radeon_clear_surface_reg(rdev, r) ((rdev)->asic->clear_surface_reg((rdev), (r)))
+#define radeon_bandwidth_update(rdev) (rdev)->asic->bandwidth_update((rdev))
#endif
int r100_gpu_reset(struct radeon_device *rdev);
int r100_mc_init(struct radeon_device *rdev);
void r100_mc_fini(struct radeon_device *rdev);
+u32 r100_get_vblank_counter(struct radeon_device *rdev, int crtc);
int r100_wb_init(struct radeon_device *rdev);
void r100_wb_fini(struct radeon_device *rdev);
int r100_gart_enable(struct radeon_device *rdev);
uint64_t dst_offset,
unsigned num_pages,
struct radeon_fence *fence);
+int r100_set_surface_reg(struct radeon_device *rdev, int reg,
+ uint32_t tiling_flags, uint32_t pitch,
+ uint32_t offset, uint32_t obj_size);
+int r100_clear_surface_reg(struct radeon_device *rdev, int reg);
+void r100_bandwidth_update(struct radeon_device *rdev);
static struct radeon_asic r100_asic = {
.init = &r100_init,
.ring_start = &r100_ring_start,
.irq_set = &r100_irq_set,
.irq_process = &r100_irq_process,
+ .get_vblank_counter = &r100_get_vblank_counter,
.fence_ring_emit = &r100_fence_ring_emit,
.cs_parse = &r100_cs_parse,
.copy_blit = &r100_copy_blit,
.set_memory_clock = NULL,
.set_pcie_lanes = NULL,
.set_clock_gating = &radeon_legacy_set_clock_gating,
+ .set_surface_reg = r100_set_surface_reg,
+ .clear_surface_reg = r100_clear_surface_reg,
+ .bandwidth_update = &r100_bandwidth_update,
};
uint64_t dst_offset,
unsigned num_pages,
struct radeon_fence *fence);
+
static struct radeon_asic r300_asic = {
.init = &r300_init,
.errata = &r300_errata,
.ring_start = &r300_ring_start,
.irq_set = &r100_irq_set,
.irq_process = &r100_irq_process,
+ .get_vblank_counter = &r100_get_vblank_counter,
.fence_ring_emit = &r300_fence_ring_emit,
.cs_parse = &r300_cs_parse,
.copy_blit = &r100_copy_blit,
.set_memory_clock = NULL,
.set_pcie_lanes = &rv370_set_pcie_lanes,
.set_clock_gating = &radeon_legacy_set_clock_gating,
+ .set_surface_reg = r100_set_surface_reg,
+ .clear_surface_reg = r100_clear_surface_reg,
+ .bandwidth_update = &r100_bandwidth_update,
};
/*
.ring_start = &r300_ring_start,
.irq_set = &r100_irq_set,
.irq_process = &r100_irq_process,
+ .get_vblank_counter = &r100_get_vblank_counter,
.fence_ring_emit = &r300_fence_ring_emit,
.cs_parse = &r300_cs_parse,
.copy_blit = &r100_copy_blit,
.set_memory_clock = &radeon_atom_set_memory_clock,
.set_pcie_lanes = &rv370_set_pcie_lanes,
.set_clock_gating = &radeon_atom_set_clock_gating,
+ .set_surface_reg = r100_set_surface_reg,
+ .clear_surface_reg = r100_clear_surface_reg,
+ .bandwidth_update = &r100_bandwidth_update,
};
.ring_start = &r300_ring_start,
.irq_set = &r100_irq_set,
.irq_process = &r100_irq_process,
+ .get_vblank_counter = &r100_get_vblank_counter,
.fence_ring_emit = &r300_fence_ring_emit,
.cs_parse = &r300_cs_parse,
.copy_blit = &r100_copy_blit,
.set_memory_clock = NULL,
.set_pcie_lanes = NULL,
.set_clock_gating = &radeon_legacy_set_clock_gating,
+ .set_surface_reg = r100_set_surface_reg,
+ .clear_surface_reg = r100_clear_surface_reg,
+ .bandwidth_update = &r100_bandwidth_update,
};
/*
* rs600.
*/
+int rs600_init(struct radeon_device *dev);
void rs600_errata(struct radeon_device *rdev);
void rs600_vram_info(struct radeon_device *rdev);
int rs600_mc_init(struct radeon_device *rdev);
void rs600_mc_fini(struct radeon_device *rdev);
int rs600_irq_set(struct radeon_device *rdev);
+int rs600_irq_process(struct radeon_device *rdev);
+u32 rs600_get_vblank_counter(struct radeon_device *rdev, int crtc);
int rs600_gart_enable(struct radeon_device *rdev);
void rs600_gart_disable(struct radeon_device *rdev);
void rs600_gart_tlb_flush(struct radeon_device *rdev);
int rs600_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr);
uint32_t rs600_mc_rreg(struct radeon_device *rdev, uint32_t reg);
void rs600_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
+void rs600_bandwidth_update(struct radeon_device *rdev);
static struct radeon_asic rs600_asic = {
- .init = &r300_init,
+ .init = &rs600_init,
.errata = &rs600_errata,
.vram_info = &rs600_vram_info,
.gpu_reset = &r300_gpu_reset,
.cp_disable = &r100_cp_disable,
.ring_start = &r300_ring_start,
.irq_set = &rs600_irq_set,
- .irq_process = &r100_irq_process,
+ .irq_process = &rs600_irq_process,
+ .get_vblank_counter = &rs600_get_vblank_counter,
.fence_ring_emit = &r300_fence_ring_emit,
.cs_parse = &r300_cs_parse,
.copy_blit = &r100_copy_blit,
.set_memory_clock = &radeon_atom_set_memory_clock,
.set_pcie_lanes = NULL,
.set_clock_gating = &radeon_atom_set_clock_gating,
+ .bandwidth_update = &rs600_bandwidth_update,
};
void rs690_mc_fini(struct radeon_device *rdev);
uint32_t rs690_mc_rreg(struct radeon_device *rdev, uint32_t reg);
void rs690_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
+void rs690_bandwidth_update(struct radeon_device *rdev);
static struct radeon_asic rs690_asic = {
- .init = &r300_init,
+ .init = &rs600_init,
.errata = &rs690_errata,
.vram_info = &rs690_vram_info,
.gpu_reset = &r300_gpu_reset,
.cp_disable = &r100_cp_disable,
.ring_start = &r300_ring_start,
.irq_set = &rs600_irq_set,
- .irq_process = &r100_irq_process,
+ .irq_process = &rs600_irq_process,
+ .get_vblank_counter = &rs600_get_vblank_counter,
.fence_ring_emit = &r300_fence_ring_emit,
.cs_parse = &r300_cs_parse,
.copy_blit = &r100_copy_blit,
.set_memory_clock = &radeon_atom_set_memory_clock,
.set_pcie_lanes = NULL,
.set_clock_gating = &radeon_atom_set_clock_gating,
+ .set_surface_reg = r100_set_surface_reg,
+ .clear_surface_reg = r100_clear_surface_reg,
+ .bandwidth_update = &rs690_bandwidth_update,
};
void rv515_ring_start(struct radeon_device *rdev);
uint32_t rv515_pcie_rreg(struct radeon_device *rdev, uint32_t reg);
void rv515_pcie_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
+void rv515_bandwidth_update(struct radeon_device *rdev);
static struct radeon_asic rv515_asic = {
.init = &rv515_init,
.errata = &rv515_errata,
.cp_fini = &r100_cp_fini,
.cp_disable = &r100_cp_disable,
.ring_start = &rv515_ring_start,
- .irq_set = &r100_irq_set,
- .irq_process = &r100_irq_process,
+ .irq_set = &rs600_irq_set,
+ .irq_process = &rs600_irq_process,
+ .get_vblank_counter = &rs600_get_vblank_counter,
.fence_ring_emit = &r300_fence_ring_emit,
.cs_parse = &r300_cs_parse,
.copy_blit = &r100_copy_blit,
.set_memory_clock = &radeon_atom_set_memory_clock,
.set_pcie_lanes = &rv370_set_pcie_lanes,
.set_clock_gating = &radeon_atom_set_clock_gating,
+ .set_surface_reg = r100_set_surface_reg,
+ .clear_surface_reg = r100_clear_surface_reg,
+ .bandwidth_update = &rv515_bandwidth_update,
};
void r520_vram_info(struct radeon_device *rdev);
int r520_mc_init(struct radeon_device *rdev);
void r520_mc_fini(struct radeon_device *rdev);
+void r520_bandwidth_update(struct radeon_device *rdev);
static struct radeon_asic r520_asic = {
.init = &rv515_init,
.errata = &r520_errata,
.cp_fini = &r100_cp_fini,
.cp_disable = &r100_cp_disable,
.ring_start = &rv515_ring_start,
- .irq_set = &r100_irq_set,
- .irq_process = &r100_irq_process,
+ .irq_set = &rs600_irq_set,
+ .irq_process = &rs600_irq_process,
+ .get_vblank_counter = &rs600_get_vblank_counter,
.fence_ring_emit = &r300_fence_ring_emit,
.cs_parse = &r300_cs_parse,
.copy_blit = &r100_copy_blit,
.set_memory_clock = &radeon_atom_set_memory_clock,
.set_pcie_lanes = &rv370_set_pcie_lanes,
.set_clock_gating = &radeon_atom_set_clock_gating,
+ .set_surface_reg = r100_set_surface_reg,
+ .clear_surface_reg = r100_clear_surface_reg,
+ .bandwidth_update = &r520_bandwidth_update,
};
/*
static bool radeon_atom_apply_quirks(struct drm_device *dev,
uint32_t supported_device,
int *connector_type,
- struct radeon_i2c_bus_rec *i2c_bus)
+ struct radeon_i2c_bus_rec *i2c_bus,
+ uint8_t *line_mux)
{
/* Asus M2A-VM HDMI board lists the DVI port as HDMI */
if ((dev->pdev->device == 0x5653) &&
(dev->pdev->subsystem_vendor == 0x1462) &&
(dev->pdev->subsystem_device == 0x0291)) {
- if (*connector_type == DRM_MODE_CONNECTOR_LVDS)
+ if (*connector_type == DRM_MODE_CONNECTOR_LVDS) {
i2c_bus->valid = false;
+ *line_mux = 53;
+ }
}
/* Funky macbooks */
if (!radeon_atom_apply_quirks
(dev, (1 << i), &bios_connectors[i].connector_type,
- &bios_connectors[i].ddc_bus))
+ &bios_connectors[i].ddc_bus, &bios_connectors[i].line_mux))
continue;
bios_connectors[i].valid = true;
if (r) {
goto out_cleanup;
}
- r = radeon_copy_dma(rdev, saddr, daddr, size >> 14, fence);
+ r = radeon_copy_dma(rdev, saddr, daddr, size / 4096, fence);
if (r) {
goto out_cleanup;
}
if (r) {
goto out_cleanup;
}
- r = radeon_copy_blit(rdev, saddr, daddr, size >> 14, fence);
+ r = radeon_copy_blit(rdev, saddr, daddr, size / 4096, fence);
if (r) {
goto out_cleanup;
}
0x00780000, /* rs480 */
};
-static struct radeon_encoder_tv_dac
- *radeon_legacy_get_tv_dac_info_from_table(struct radeon_device *rdev)
+static void radeon_legacy_get_tv_dac_info_from_table(struct radeon_device *rdev,
+ struct radeon_encoder_tv_dac *tv_dac)
{
- struct radeon_encoder_tv_dac *tv_dac = NULL;
-
- tv_dac = kzalloc(sizeof(struct radeon_encoder_tv_dac), GFP_KERNEL);
-
- if (!tv_dac)
- return NULL;
-
tv_dac->ps2_tvdac_adj = default_tvdac_adj[rdev->family];
if ((rdev->flags & RADEON_IS_MOBILITY) && (rdev->family == CHIP_RV250))
tv_dac->ps2_tvdac_adj = 0x00880000;
tv_dac->pal_tvdac_adj = tv_dac->ps2_tvdac_adj;
tv_dac->ntsc_tvdac_adj = tv_dac->ps2_tvdac_adj;
-
- return tv_dac;
+ return;
}
struct radeon_encoder_tv_dac *radeon_combios_get_tv_dac_info(struct
uint16_t dac_info;
uint8_t rev, bg, dac;
struct radeon_encoder_tv_dac *tv_dac = NULL;
+ int found = 0;
+
+ tv_dac = kzalloc(sizeof(struct radeon_encoder_tv_dac), GFP_KERNEL);
+ if (!tv_dac)
+ return NULL;
if (rdev->bios == NULL)
- return radeon_legacy_get_tv_dac_info_from_table(rdev);
+ goto out;
/* first check TV table */
dac_info = combios_get_table_offset(dev, COMBIOS_TV_INFO_TABLE);
if (dac_info) {
- tv_dac =
- kzalloc(sizeof(struct radeon_encoder_tv_dac), GFP_KERNEL);
-
- if (!tv_dac)
- return NULL;
-
rev = RBIOS8(dac_info + 0x3);
if (rev > 4) {
bg = RBIOS8(dac_info + 0xc) & 0xf;
bg = RBIOS8(dac_info + 0x10) & 0xf;
dac = RBIOS8(dac_info + 0x11) & 0xf;
tv_dac->ntsc_tvdac_adj = (bg << 16) | (dac << 20);
+ found = 1;
} else if (rev > 1) {
bg = RBIOS8(dac_info + 0xc) & 0xf;
dac = (RBIOS8(dac_info + 0xc) >> 4) & 0xf;
bg = RBIOS8(dac_info + 0xe) & 0xf;
dac = (RBIOS8(dac_info + 0xe) >> 4) & 0xf;
tv_dac->ntsc_tvdac_adj = (bg << 16) | (dac << 20);
+ found = 1;
}
-
tv_dac->tv_std = radeon_combios_get_tv_info(encoder);
-
- } else {
+ }
+ if (!found) {
/* then check CRT table */
dac_info =
combios_get_table_offset(dev, COMBIOS_CRT_INFO_TABLE);
if (dac_info) {
- tv_dac =
- kzalloc(sizeof(struct radeon_encoder_tv_dac),
- GFP_KERNEL);
-
- if (!tv_dac)
- return NULL;
-
rev = RBIOS8(dac_info) & 0x3;
if (rev < 2) {
bg = RBIOS8(dac_info + 0x3) & 0xf;
(bg << 16) | (dac << 20);
tv_dac->pal_tvdac_adj = tv_dac->ps2_tvdac_adj;
tv_dac->ntsc_tvdac_adj = tv_dac->ps2_tvdac_adj;
+ found = 1;
} else {
bg = RBIOS8(dac_info + 0x4) & 0xf;
dac = RBIOS8(dac_info + 0x5) & 0xf;
(bg << 16) | (dac << 20);
tv_dac->pal_tvdac_adj = tv_dac->ps2_tvdac_adj;
tv_dac->ntsc_tvdac_adj = tv_dac->ps2_tvdac_adj;
+ found = 1;
}
} else {
DRM_INFO("No TV DAC info found in BIOS\n");
- return radeon_legacy_get_tv_dac_info_from_table(rdev);
}
}
+out:
+ if (!found) /* fallback to defaults */
+ radeon_legacy_get_tv_dac_info_from_table(rdev, tv_dac);
+
return tv_dac;
}
{
uint32_t gb_tile_config, gb_pipe_sel = 0;
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV530) {
+ uint32_t z_pipe_sel = RADEON_READ(RV530_GB_PIPE_SELECT2);
+ if ((z_pipe_sel & 3) == 3)
+ dev_priv->num_z_pipes = 2;
+ else
+ dev_priv->num_z_pipes = 1;
+ } else
+ dev_priv->num_z_pipes = 1;
+
/* RS4xx/RS6xx/R4xx/R5xx */
if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R420) {
gb_pipe_sel = RADEON_READ(R400_GB_PIPE_SELECT);
sizeof(struct drm_radeon_cs_chunk))) {
return -EFAULT;
}
+ p->chunks[i].length_dw = user_chunk.length_dw;
+ p->chunks[i].kdata = NULL;
p->chunks[i].chunk_id = user_chunk.chunk_id;
+
if (p->chunks[i].chunk_id == RADEON_CHUNK_ID_RELOCS) {
p->chunk_relocs_idx = i;
}
if (p->chunks[i].chunk_id == RADEON_CHUNK_ID_IB) {
p->chunk_ib_idx = i;
+ /* zero length IB isn't useful */
+ if (p->chunks[i].length_dw == 0)
+ return -EINVAL;
}
+
p->chunks[i].length_dw = user_chunk.length_dw;
cdata = (uint32_t *)(unsigned long)user_chunk.chunk_data;
- p->chunks[i].kdata = NULL;
size = p->chunks[i].length_dw * sizeof(uint32_t);
p->chunks[i].kdata = kzalloc(size, GFP_KERNEL);
if (p->chunks[i].kdata == NULL) {
if (ASIC_IS_AVIVO(rdev))
WREG32(AVIVO_D1CUR_SURFACE_ADDRESS + radeon_crtc->crtc_offset, gpu_addr);
- else
+ else {
+ radeon_crtc->legacy_cursor_offset = gpu_addr - radeon_crtc->legacy_display_base_addr;
/* offset is from DISP(2)_BASE_ADDRESS */
- WREG32(RADEON_CUR_OFFSET + radeon_crtc->crtc_offset, gpu_addr);
+ WREG32(RADEON_CUR_OFFSET + radeon_crtc->crtc_offset, radeon_crtc->legacy_cursor_offset);
+ }
}
int radeon_crtc_cursor_set(struct drm_crtc *crtc,
(RADEON_CUR_LOCK
| ((xorigin ? 0 : x) << 16)
| (yorigin ? 0 : y)));
+ /* offset is from DISP(2)_BASE_ADDRESS */
+ WREG32(RADEON_CUR_OFFSET + radeon_crtc->crtc_offset, (radeon_crtc->legacy_cursor_offset +
+ (yorigin * 256)));
}
radeon_lock_cursor(crtc, false);
i * (RADEON_SURFACE1_INFO - RADEON_SURFACE0_INFO),
0);
}
+ /* enable surfaces */
+ WREG32(RADEON_SURFACE_CNTL, 0);
}
}
if (rdev->mc.vram_location != 0xFFFFFFFFUL) {
/* vram location was already setup try to put gtt after
* if it fits */
- tmp = rdev->mc.vram_location + rdev->mc.vram_size;
+ tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size;
tmp = (tmp + rdev->mc.gtt_size - 1) & ~(rdev->mc.gtt_size - 1);
if ((0xFFFFFFFFUL - tmp) >= rdev->mc.gtt_size) {
rdev->mc.gtt_location = tmp;
} else if (rdev->mc.gtt_location != 0xFFFFFFFFUL) {
/* gtt location was already setup try to put vram before
* if it fits */
- if (rdev->mc.vram_size < rdev->mc.gtt_location) {
+ if (rdev->mc.mc_vram_size < rdev->mc.gtt_location) {
rdev->mc.vram_location = 0;
} else {
tmp = rdev->mc.gtt_location + rdev->mc.gtt_size;
- tmp += (rdev->mc.vram_size - 1);
- tmp &= ~(rdev->mc.vram_size - 1);
- if ((0xFFFFFFFFUL - tmp) >= rdev->mc.vram_size) {
+ tmp += (rdev->mc.mc_vram_size - 1);
+ tmp &= ~(rdev->mc.mc_vram_size - 1);
+ if ((0xFFFFFFFFUL - tmp) >= rdev->mc.mc_vram_size) {
rdev->mc.vram_location = tmp;
} else {
printk(KERN_ERR "[drm] vram too big to fit "
}
} else {
rdev->mc.vram_location = 0;
- rdev->mc.gtt_location = rdev->mc.vram_size;
+ tmp = rdev->mc.mc_vram_size;
+ tmp = (tmp + rdev->mc.gtt_size - 1) & ~(rdev->mc.gtt_size - 1);
+ rdev->mc.gtt_location = tmp;
}
- DRM_INFO("radeon: VRAM %uM\n", rdev->mc.vram_size >> 20);
+ DRM_INFO("radeon: VRAM %uM\n", rdev->mc.real_vram_size >> 20);
DRM_INFO("radeon: VRAM from 0x%08X to 0x%08X\n",
rdev->mc.vram_location,
- rdev->mc.vram_location + rdev->mc.vram_size - 1);
+ rdev->mc.vram_location + rdev->mc.mc_vram_size - 1);
+ if (rdev->mc.real_vram_size != rdev->mc.mc_vram_size)
+ DRM_INFO("radeon: VRAM less than aperture workaround enabled\n");
DRM_INFO("radeon: GTT %uM\n", rdev->mc.gtt_size >> 20);
DRM_INFO("radeon: GTT from 0x%08X to 0x%08X\n",
rdev->mc.gtt_location,
void radeon_register_accessor_init(struct radeon_device *rdev)
{
- rdev->mm_rreg = &r100_mm_rreg;
- rdev->mm_wreg = &r100_mm_wreg;
rdev->mc_rreg = &radeon_invalid_rreg;
rdev->mc_wreg = &radeon_invalid_wreg;
rdev->pll_rreg = &radeon_invalid_rreg;
rdev->pll_wreg = &radeon_invalid_wreg;
- rdev->pcie_rreg = &radeon_invalid_rreg;
- rdev->pcie_wreg = &radeon_invalid_wreg;
rdev->pciep_rreg = &radeon_invalid_rreg;
rdev->pciep_wreg = &radeon_invalid_wreg;
/* Don't change order as we are overridding accessor. */
if (rdev->family < CHIP_RV515) {
- rdev->pcie_rreg = &rv370_pcie_rreg;
- rdev->pcie_wreg = &rv370_pcie_wreg;
- }
- if (rdev->family >= CHIP_RV515) {
- rdev->pcie_rreg = &rv515_pcie_rreg;
- rdev->pcie_wreg = &rv515_pcie_wreg;
+ rdev->pcie_reg_mask = 0xff;
+ } else {
+ rdev->pcie_reg_mask = 0x7ff;
}
/* FIXME: not sure here */
if (rdev->family <= CHIP_R580) {
uint32_t flags)
{
int r, ret;
+ int dma_bits;
DRM_INFO("radeon: Initializing kernel modesetting.\n");
rdev->shutdown = false;
return r;
}
- /* Report DMA addressing limitation */
- r = pci_set_dma_mask(rdev->pdev, DMA_BIT_MASK(32));
+ /* set DMA mask + need_dma32 flags.
+ * PCIE - can handle 40-bits.
+ * IGP - can handle 40-bits (in theory)
+ * AGP - generally dma32 is safest
+ * PCI - only dma32
+ */
+ rdev->need_dma32 = false;
+ if (rdev->flags & RADEON_IS_AGP)
+ rdev->need_dma32 = true;
+ if (rdev->flags & RADEON_IS_PCI)
+ rdev->need_dma32 = true;
+
+ dma_bits = rdev->need_dma32 ? 32 : 40;
+ r = pci_set_dma_mask(rdev->pdev, DMA_BIT_MASK(dma_bits));
if (r) {
printk(KERN_WARNING "radeon: No suitable DMA available.\n");
}
radeon_combios_asic_init(rdev->ddev);
}
}
+ /* Initialize clocks */
+ r = radeon_clocks_init(rdev);
+ if (r) {
+ return r;
+ }
/* Get vram informations */
radeon_vram_info(rdev);
- /* Device is severly broken if aper size > vram size.
- * for RN50/M6/M7 - Novell bug 204882 ?
- */
- if (rdev->mc.vram_size < rdev->mc.aper_size) {
- rdev->mc.aper_size = rdev->mc.vram_size;
- }
+
/* Add an MTRR for the VRAM */
rdev->mc.vram_mtrr = mtrr_add(rdev->mc.aper_base, rdev->mc.aper_size,
MTRR_TYPE_WRCOMB, 1);
DRM_INFO("Detected VRAM RAM=%uM, BAR=%uM\n",
- rdev->mc.vram_size >> 20,
+ rdev->mc.real_vram_size >> 20,
(unsigned)rdev->mc.aper_size >> 20);
DRM_INFO("RAM width %dbits %cDR\n",
rdev->mc.vram_width, rdev->mc.vram_is_ddr ? 'D' : 'S');
- /* Initialize clocks */
- r = radeon_clocks_init(rdev);
- if (r) {
- return r;
- }
/* Initialize memory controller (also test AGP) */
r = radeon_mc_init(rdev);
if (r) {
if (!ret) {
DRM_INFO("radeon: kernel modesetting successfully initialized.\n");
}
+ if (radeon_testing) {
+ radeon_test_moves(rdev);
+ }
if (radeon_benchmarking) {
radeon_benchmark(rdev);
}
drm_mode_crtc_set_gamma_size(&radeon_crtc->base, 256);
radeon_crtc->crtc_id = index;
+ rdev->mode_info.crtcs[index] = radeon_crtc;
radeon_crtc->mode_set.crtc = &radeon_crtc->base;
radeon_crtc->mode_set.connectors = (struct drm_connector **)(radeon_crtc + 1);
tmp += (uint64_t)pll->reference_freq * 1000 * frac_feedback_div;
current_freq = radeon_div(tmp, ref_div * post_div);
- error = abs(current_freq - freq);
+ if (flags & RADEON_PLL_PREFER_CLOSEST_LOWER) {
+ error = freq - current_freq;
+ error = error < 0 ? 0xffffffff : error;
+ } else
+ error = abs(current_freq - freq);
vco_diff = abs(vco - best_vco);
if ((best_vco == 0 && error < best_error) ||
}
}
-void radeon_init_disp_bandwidth(struct drm_device *dev)
+bool radeon_crtc_scaling_mode_fixup(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
{
- struct radeon_device *rdev = dev->dev_private;
- struct drm_display_mode *modes[2];
- int pixel_bytes[2];
- struct drm_crtc *crtc;
-
- pixel_bytes[0] = pixel_bytes[1] = 0;
- modes[0] = modes[1] = NULL;
-
- list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
- struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+ struct drm_device *dev = crtc->dev;
+ struct drm_encoder *encoder;
+ struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+ struct radeon_encoder *radeon_encoder;
+ bool first = true;
- if (crtc->enabled && crtc->fb) {
- modes[radeon_crtc->crtc_id] = &crtc->mode;
- pixel_bytes[radeon_crtc->crtc_id] = crtc->fb->bits_per_pixel / 8;
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+ radeon_encoder = to_radeon_encoder(encoder);
+ if (encoder->crtc != crtc)
+ continue;
+ if (first) {
+ radeon_crtc->rmx_type = radeon_encoder->rmx_type;
+ radeon_crtc->devices = radeon_encoder->devices;
+ memcpy(&radeon_crtc->native_mode,
+ &radeon_encoder->native_mode,
+ sizeof(struct radeon_native_mode));
+ first = false;
+ } else {
+ if (radeon_crtc->rmx_type != radeon_encoder->rmx_type) {
+ /* WARNING: Right now this can't happen but
+ * in the future we need to check that scaling
+ * are consistent accross different encoder
+ * (ie all encoder can work with the same
+ * scaling).
+ */
+ DRM_ERROR("Scaling not consistent accross encoder.\n");
+ return false;
+ }
}
}
-
- if (ASIC_IS_AVIVO(rdev)) {
- radeon_init_disp_bw_avivo(dev,
- modes[0],
- pixel_bytes[0],
- modes[1],
- pixel_bytes[1]);
+ if (radeon_crtc->rmx_type != RMX_OFF) {
+ fixed20_12 a, b;
+ a.full = rfixed_const(crtc->mode.vdisplay);
+ b.full = rfixed_const(radeon_crtc->native_mode.panel_xres);
+ radeon_crtc->vsc.full = rfixed_div(a, b);
+ a.full = rfixed_const(crtc->mode.hdisplay);
+ b.full = rfixed_const(radeon_crtc->native_mode.panel_yres);
+ radeon_crtc->hsc.full = rfixed_div(a, b);
} else {
- radeon_init_disp_bw_legacy(dev,
- modes[0],
- pixel_bytes[0],
- modes[1],
- pixel_bytes[1]);
+ radeon_crtc->vsc.full = rfixed_const(1);
+ radeon_crtc->hsc.full = rfixed_const(1);
}
+ return true;
}
int radeon_vram_limit = 0;
int radeon_gart_size = 512; /* default gart size */
int radeon_benchmarking = 0;
+int radeon_testing = 0;
int radeon_connector_table = 0;
#endif
MODULE_PARM_DESC(benchmark, "Run benchmark");
module_param_named(benchmark, radeon_benchmarking, int, 0444);
+MODULE_PARM_DESC(test, "Run tests");
+module_param_named(test, radeon_testing, int, 0444);
+
MODULE_PARM_DESC(connector_table, "Force connector table");
module_param_named(connector_table, radeon_connector_table, int, 0444);
#endif
driver = &driver_old;
driver->num_ioctls = radeon_max_ioctl;
#if defined(CONFIG_DRM_RADEON_KMS)
+#ifdef CONFIG_VGA_CONSOLE
+ if (vgacon_text_force() && radeon_modeset == -1) {
+ DRM_INFO("VGACON disable radeon kernel modesetting.\n");
+ driver = &driver_old;
+ driver->driver_features &= ~DRIVER_MODESET;
+ radeon_modeset = 0;
+ }
+#endif
/* if enabled by default */
if (radeon_modeset == -1) {
DRM_INFO("radeon default to kernel modesetting.\n");
driver->driver_features |= DRIVER_MODESET;
driver->num_ioctls = radeon_max_kms_ioctl;
}
-
/* if the vga console setting is enabled still
* let modprobe override it */
-#ifdef CONFIG_VGA_CONSOLE
- if (vgacon_text_force() && radeon_modeset == -1) {
- DRM_INFO("VGACON disable radeon kernel modesetting.\n");
- driver = &driver_old;
- driver->driver_features &= ~DRIVER_MODESET;
- radeon_modeset = 0;
- }
-#endif
#endif
return drm_init(driver);
}
* 1.28- Add support for VBL on CRTC2
* 1.29- R500 3D cmd buffer support
* 1.30- Add support for occlusion queries
+ * 1.31- Add support for num Z pipes from GET_PARAM
*/
#define DRIVER_MAJOR 1
-#define DRIVER_MINOR 30
+#define DRIVER_MINOR 31
#define DRIVER_PATCHLEVEL 0
/*
CHIP_RV635,
CHIP_RV670,
CHIP_RS780,
+ CHIP_RS880,
CHIP_RV770,
CHIP_RV730,
CHIP_RV710,
resource_size_t fb_aper_offset;
int num_gb_pipes;
+ int num_z_pipes;
int track_flush;
drm_local_map_t *mmio;
/* pipe config regs */
#define R400_GB_PIPE_SELECT 0x402c
+#define RV530_GB_PIPE_SELECT2 0x4124
#define R500_DYN_SCLK_PWMEM_PIPE 0x000d /* PLL */
#define R300_GB_TILE_CONFIG 0x4018
# define R300_ENABLE_TILING (1 << 0)
if (mode->hdisplay < native_mode->panel_xres ||
mode->vdisplay < native_mode->panel_yres) {
- radeon_encoder->flags |= RADEON_USE_RMX;
if (ASIC_IS_AVIVO(rdev)) {
adjusted_mode->hdisplay = native_mode->panel_xres;
adjusted_mode->vdisplay = native_mode->panel_yres;
}
}
+
static bool radeon_atom_mode_fixup(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
-
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- radeon_encoder->flags &= ~RADEON_USE_RMX;
-
drm_mode_set_crtcinfo(adjusted_mode, 0);
if (radeon_encoder->rmx_type != RMX_OFF)
}
-static void atom_rv515_force_tv_scaler(struct radeon_device *rdev)
-{
-
- WREG32(0x659C, 0x0);
- WREG32(0x6594, 0x705);
- WREG32(0x65A4, 0x10001);
- WREG32(0x65D8, 0x0);
- WREG32(0x65B0, 0x0);
- WREG32(0x65C0, 0x0);
- WREG32(0x65D4, 0x0);
- WREG32(0x6578, 0x0);
- WREG32(0x657C, 0x841880A8);
- WREG32(0x6578, 0x1);
- WREG32(0x657C, 0x84208680);
- WREG32(0x6578, 0x2);
- WREG32(0x657C, 0xBFF880B0);
- WREG32(0x6578, 0x100);
- WREG32(0x657C, 0x83D88088);
- WREG32(0x6578, 0x101);
- WREG32(0x657C, 0x84608680);
- WREG32(0x6578, 0x102);
- WREG32(0x657C, 0xBFF080D0);
- WREG32(0x6578, 0x200);
- WREG32(0x657C, 0x83988068);
- WREG32(0x6578, 0x201);
- WREG32(0x657C, 0x84A08680);
- WREG32(0x6578, 0x202);
- WREG32(0x657C, 0xBFF080F8);
- WREG32(0x6578, 0x300);
- WREG32(0x657C, 0x83588058);
- WREG32(0x6578, 0x301);
- WREG32(0x657C, 0x84E08660);
- WREG32(0x6578, 0x302);
- WREG32(0x657C, 0xBFF88120);
- WREG32(0x6578, 0x400);
- WREG32(0x657C, 0x83188040);
- WREG32(0x6578, 0x401);
- WREG32(0x657C, 0x85008660);
- WREG32(0x6578, 0x402);
- WREG32(0x657C, 0xBFF88150);
- WREG32(0x6578, 0x500);
- WREG32(0x657C, 0x82D88030);
- WREG32(0x6578, 0x501);
- WREG32(0x657C, 0x85408640);
- WREG32(0x6578, 0x502);
- WREG32(0x657C, 0xBFF88180);
- WREG32(0x6578, 0x600);
- WREG32(0x657C, 0x82A08018);
- WREG32(0x6578, 0x601);
- WREG32(0x657C, 0x85808620);
- WREG32(0x6578, 0x602);
- WREG32(0x657C, 0xBFF081B8);
- WREG32(0x6578, 0x700);
- WREG32(0x657C, 0x82608010);
- WREG32(0x6578, 0x701);
- WREG32(0x657C, 0x85A08600);
- WREG32(0x6578, 0x702);
- WREG32(0x657C, 0x800081F0);
- WREG32(0x6578, 0x800);
- WREG32(0x657C, 0x8228BFF8);
- WREG32(0x6578, 0x801);
- WREG32(0x657C, 0x85E085E0);
- WREG32(0x6578, 0x802);
- WREG32(0x657C, 0xBFF88228);
- WREG32(0x6578, 0x10000);
- WREG32(0x657C, 0x82A8BF00);
- WREG32(0x6578, 0x10001);
- WREG32(0x657C, 0x82A08CC0);
- WREG32(0x6578, 0x10002);
- WREG32(0x657C, 0x8008BEF8);
- WREG32(0x6578, 0x10100);
- WREG32(0x657C, 0x81F0BF28);
- WREG32(0x6578, 0x10101);
- WREG32(0x657C, 0x83608CA0);
- WREG32(0x6578, 0x10102);
- WREG32(0x657C, 0x8018BED0);
- WREG32(0x6578, 0x10200);
- WREG32(0x657C, 0x8148BF38);
- WREG32(0x6578, 0x10201);
- WREG32(0x657C, 0x84408C80);
- WREG32(0x6578, 0x10202);
- WREG32(0x657C, 0x8008BEB8);
- WREG32(0x6578, 0x10300);
- WREG32(0x657C, 0x80B0BF78);
- WREG32(0x6578, 0x10301);
- WREG32(0x657C, 0x85008C20);
- WREG32(0x6578, 0x10302);
- WREG32(0x657C, 0x8020BEA0);
- WREG32(0x6578, 0x10400);
- WREG32(0x657C, 0x8028BF90);
- WREG32(0x6578, 0x10401);
- WREG32(0x657C, 0x85E08BC0);
- WREG32(0x6578, 0x10402);
- WREG32(0x657C, 0x8018BE90);
- WREG32(0x6578, 0x10500);
- WREG32(0x657C, 0xBFB8BFB0);
- WREG32(0x6578, 0x10501);
- WREG32(0x657C, 0x86C08B40);
- WREG32(0x6578, 0x10502);
- WREG32(0x657C, 0x8010BE90);
- WREG32(0x6578, 0x10600);
- WREG32(0x657C, 0xBF58BFC8);
- WREG32(0x6578, 0x10601);
- WREG32(0x657C, 0x87A08AA0);
- WREG32(0x6578, 0x10602);
- WREG32(0x657C, 0x8010BE98);
- WREG32(0x6578, 0x10700);
- WREG32(0x657C, 0xBF10BFF0);
- WREG32(0x6578, 0x10701);
- WREG32(0x657C, 0x886089E0);
- WREG32(0x6578, 0x10702);
- WREG32(0x657C, 0x8018BEB0);
- WREG32(0x6578, 0x10800);
- WREG32(0x657C, 0xBED8BFE8);
- WREG32(0x6578, 0x10801);
- WREG32(0x657C, 0x89408940);
- WREG32(0x6578, 0x10802);
- WREG32(0x657C, 0xBFE8BED8);
- WREG32(0x6578, 0x20000);
- WREG32(0x657C, 0x80008000);
- WREG32(0x6578, 0x20001);
- WREG32(0x657C, 0x90008000);
- WREG32(0x6578, 0x20002);
- WREG32(0x657C, 0x80008000);
- WREG32(0x6578, 0x20003);
- WREG32(0x657C, 0x80008000);
- WREG32(0x6578, 0x20100);
- WREG32(0x657C, 0x80108000);
- WREG32(0x6578, 0x20101);
- WREG32(0x657C, 0x8FE0BF70);
- WREG32(0x6578, 0x20102);
- WREG32(0x657C, 0xBFE880C0);
- WREG32(0x6578, 0x20103);
- WREG32(0x657C, 0x80008000);
- WREG32(0x6578, 0x20200);
- WREG32(0x657C, 0x8018BFF8);
- WREG32(0x6578, 0x20201);
- WREG32(0x657C, 0x8F80BF08);
- WREG32(0x6578, 0x20202);
- WREG32(0x657C, 0xBFD081A0);
- WREG32(0x6578, 0x20203);
- WREG32(0x657C, 0xBFF88000);
- WREG32(0x6578, 0x20300);
- WREG32(0x657C, 0x80188000);
- WREG32(0x6578, 0x20301);
- WREG32(0x657C, 0x8EE0BEC0);
- WREG32(0x6578, 0x20302);
- WREG32(0x657C, 0xBFB082A0);
- WREG32(0x6578, 0x20303);
- WREG32(0x657C, 0x80008000);
- WREG32(0x6578, 0x20400);
- WREG32(0x657C, 0x80188000);
- WREG32(0x6578, 0x20401);
- WREG32(0x657C, 0x8E00BEA0);
- WREG32(0x6578, 0x20402);
- WREG32(0x657C, 0xBF8883C0);
- WREG32(0x6578, 0x20403);
- WREG32(0x657C, 0x80008000);
- WREG32(0x6578, 0x20500);
- WREG32(0x657C, 0x80188000);
- WREG32(0x6578, 0x20501);
- WREG32(0x657C, 0x8D00BE90);
- WREG32(0x6578, 0x20502);
- WREG32(0x657C, 0xBF588500);
- WREG32(0x6578, 0x20503);
- WREG32(0x657C, 0x80008008);
- WREG32(0x6578, 0x20600);
- WREG32(0x657C, 0x80188000);
- WREG32(0x6578, 0x20601);
- WREG32(0x657C, 0x8BC0BE98);
- WREG32(0x6578, 0x20602);
- WREG32(0x657C, 0xBF308660);
- WREG32(0x6578, 0x20603);
- WREG32(0x657C, 0x80008008);
- WREG32(0x6578, 0x20700);
- WREG32(0x657C, 0x80108000);
- WREG32(0x6578, 0x20701);
- WREG32(0x657C, 0x8A80BEB0);
- WREG32(0x6578, 0x20702);
- WREG32(0x657C, 0xBF0087C0);
- WREG32(0x6578, 0x20703);
- WREG32(0x657C, 0x80008008);
- WREG32(0x6578, 0x20800);
- WREG32(0x657C, 0x80108000);
- WREG32(0x6578, 0x20801);
- WREG32(0x657C, 0x8920BED0);
- WREG32(0x6578, 0x20802);
- WREG32(0x657C, 0xBED08920);
- WREG32(0x6578, 0x20803);
- WREG32(0x657C, 0x80008010);
- WREG32(0x6578, 0x30000);
- WREG32(0x657C, 0x90008000);
- WREG32(0x6578, 0x30001);
- WREG32(0x657C, 0x80008000);
- WREG32(0x6578, 0x30100);
- WREG32(0x657C, 0x8FE0BF90);
- WREG32(0x6578, 0x30101);
- WREG32(0x657C, 0xBFF880A0);
- WREG32(0x6578, 0x30200);
- WREG32(0x657C, 0x8F60BF40);
- WREG32(0x6578, 0x30201);
- WREG32(0x657C, 0xBFE88180);
- WREG32(0x6578, 0x30300);
- WREG32(0x657C, 0x8EC0BF00);
- WREG32(0x6578, 0x30301);
- WREG32(0x657C, 0xBFC88280);
- WREG32(0x6578, 0x30400);
- WREG32(0x657C, 0x8DE0BEE0);
- WREG32(0x6578, 0x30401);
- WREG32(0x657C, 0xBFA083A0);
- WREG32(0x6578, 0x30500);
- WREG32(0x657C, 0x8CE0BED0);
- WREG32(0x6578, 0x30501);
- WREG32(0x657C, 0xBF7884E0);
- WREG32(0x6578, 0x30600);
- WREG32(0x657C, 0x8BA0BED8);
- WREG32(0x6578, 0x30601);
- WREG32(0x657C, 0xBF508640);
- WREG32(0x6578, 0x30700);
- WREG32(0x657C, 0x8A60BEE8);
- WREG32(0x6578, 0x30701);
- WREG32(0x657C, 0xBF2087A0);
- WREG32(0x6578, 0x30800);
- WREG32(0x657C, 0x8900BF00);
- WREG32(0x6578, 0x30801);
- WREG32(0x657C, 0xBF008900);
-}
-
static void
atombios_yuv_setup(struct drm_encoder *encoder, bool enable)
{
WREG32(reg, temp);
}
-static void
-atombios_overscan_setup(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- struct drm_device *dev = encoder->dev;
- struct radeon_device *rdev = dev->dev_private;
- struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
- SET_CRTC_OVERSCAN_PS_ALLOCATION args;
- int index = GetIndexIntoMasterTable(COMMAND, SetCRTC_OverScan);
-
- memset(&args, 0, sizeof(args));
-
- args.usOverscanRight = 0;
- args.usOverscanLeft = 0;
- args.usOverscanBottom = 0;
- args.usOverscanTop = 0;
- args.ucCRTC = radeon_crtc->crtc_id;
-
- if (radeon_encoder->flags & RADEON_USE_RMX) {
- if (radeon_encoder->rmx_type == RMX_FULL) {
- args.usOverscanRight = 0;
- args.usOverscanLeft = 0;
- args.usOverscanBottom = 0;
- args.usOverscanTop = 0;
- } else if (radeon_encoder->rmx_type == RMX_CENTER) {
- args.usOverscanTop = (adjusted_mode->crtc_vdisplay - mode->crtc_vdisplay) / 2;
- args.usOverscanBottom = (adjusted_mode->crtc_vdisplay - mode->crtc_vdisplay) / 2;
- args.usOverscanLeft = (adjusted_mode->crtc_hdisplay - mode->crtc_hdisplay) / 2;
- args.usOverscanRight = (adjusted_mode->crtc_hdisplay - mode->crtc_hdisplay) / 2;
- } else if (radeon_encoder->rmx_type == RMX_ASPECT) {
- int a1 = mode->crtc_vdisplay * adjusted_mode->crtc_hdisplay;
- int a2 = adjusted_mode->crtc_vdisplay * mode->crtc_hdisplay;
-
- if (a1 > a2) {
- args.usOverscanLeft = (adjusted_mode->crtc_hdisplay - (a2 / mode->crtc_vdisplay)) / 2;
- args.usOverscanRight = (adjusted_mode->crtc_hdisplay - (a2 / mode->crtc_vdisplay)) / 2;
- } else if (a2 > a1) {
- args.usOverscanLeft = (adjusted_mode->crtc_vdisplay - (a1 / mode->crtc_hdisplay)) / 2;
- args.usOverscanRight = (adjusted_mode->crtc_vdisplay - (a1 / mode->crtc_hdisplay)) / 2;
- }
- }
- }
-
- atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-
-}
-
-static void
-atombios_scaler_setup(struct drm_encoder *encoder)
-{
- struct drm_device *dev = encoder->dev;
- struct radeon_device *rdev = dev->dev_private;
- struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
- ENABLE_SCALER_PS_ALLOCATION args;
- int index = GetIndexIntoMasterTable(COMMAND, EnableScaler);
- /* fixme - fill in enc_priv for atom dac */
- enum radeon_tv_std tv_std = TV_STD_NTSC;
-
- if (!ASIC_IS_AVIVO(rdev) && radeon_crtc->crtc_id)
- return;
-
- memset(&args, 0, sizeof(args));
-
- args.ucScaler = radeon_crtc->crtc_id;
-
- if (radeon_encoder->devices & (ATOM_DEVICE_TV_SUPPORT)) {
- switch (tv_std) {
- case TV_STD_NTSC:
- default:
- args.ucTVStandard = ATOM_TV_NTSC;
- break;
- case TV_STD_PAL:
- args.ucTVStandard = ATOM_TV_PAL;
- break;
- case TV_STD_PAL_M:
- args.ucTVStandard = ATOM_TV_PALM;
- break;
- case TV_STD_PAL_60:
- args.ucTVStandard = ATOM_TV_PAL60;
- break;
- case TV_STD_NTSC_J:
- args.ucTVStandard = ATOM_TV_NTSCJ;
- break;
- case TV_STD_SCART_PAL:
- args.ucTVStandard = ATOM_TV_PAL; /* ??? */
- break;
- case TV_STD_SECAM:
- args.ucTVStandard = ATOM_TV_SECAM;
- break;
- case TV_STD_PAL_CN:
- args.ucTVStandard = ATOM_TV_PALCN;
- break;
- }
- args.ucEnable = SCALER_ENABLE_MULTITAP_MODE;
- } else if (radeon_encoder->devices & (ATOM_DEVICE_CV_SUPPORT)) {
- args.ucTVStandard = ATOM_TV_CV;
- args.ucEnable = SCALER_ENABLE_MULTITAP_MODE;
- } else if (radeon_encoder->flags & RADEON_USE_RMX) {
- if (radeon_encoder->rmx_type == RMX_FULL)
- args.ucEnable = ATOM_SCALER_EXPANSION;
- else if (radeon_encoder->rmx_type == RMX_CENTER)
- args.ucEnable = ATOM_SCALER_CENTER;
- else if (radeon_encoder->rmx_type == RMX_ASPECT)
- args.ucEnable = ATOM_SCALER_EXPANSION;
- } else {
- if (ASIC_IS_AVIVO(rdev))
- args.ucEnable = ATOM_SCALER_DISABLE;
- else
- args.ucEnable = ATOM_SCALER_CENTER;
- }
-
- atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-
- if (radeon_encoder->devices & (ATOM_DEVICE_CV_SUPPORT | ATOM_DEVICE_TV_SUPPORT)
- && rdev->family >= CHIP_RV515 && rdev->family <= CHIP_RV570) {
- atom_rv515_force_tv_scaler(rdev);
- }
-
-}
-
static void
radeon_atom_encoder_dpms(struct drm_encoder *encoder, int mode)
{
radeon_encoder->pixel_clock = adjusted_mode->clock;
radeon_atombios_encoder_crtc_scratch_regs(encoder, radeon_crtc->crtc_id);
- atombios_overscan_setup(encoder, mode, adjusted_mode);
- atombios_scaler_setup(encoder);
atombios_set_encoder_crtc_source(encoder);
if (ASIC_IS_AVIVO(rdev)) {
radeon_encoder->encoder_id = encoder_id;
radeon_encoder->devices = supported_device;
+ radeon_encoder->rmx_type = RMX_OFF;
switch (radeon_encoder->encoder_id) {
case ENCODER_OBJECT_ID_INTERNAL_LVDS:
break;
case 24:
case 32:
- fb->pseudo_palette[regno] = ((red & 0xff00) << 8) |
- (green & 0xff00) |
- ((blue & 0xff00) >> 8);
+ fb->pseudo_palette[regno] =
+ (((red >> 8) & 0xff) << info->var.red.offset) |
+ (((green >> 8) & 0xff) << info->var.green.offset) |
+ (((blue >> 8) & 0xff) << info->var.blue.offset);
break;
}
}
var->transp.length = 0;
var->transp.offset = 0;
break;
+#ifdef __LITTLE_ENDIAN
case 15:
var->red.offset = 10;
var->green.offset = 5;
var->transp.length = 8;
var->transp.offset = 24;
break;
+#else
+ case 24:
+ var->red.offset = 8;
+ var->green.offset = 16;
+ var->blue.offset = 24;
+ var->red.length = 8;
+ var->green.length = 8;
+ var->blue.length = 8;
+ var->transp.length = 0;
+ var->transp.offset = 0;
+ break;
+ case 32:
+ var->red.offset = 8;
+ var->green.offset = 16;
+ var->blue.offset = 24;
+ var->red.length = 8;
+ var->green.length = 8;
+ var->blue.length = 8;
+ var->transp.length = 8;
+ var->transp.offset = 0;
+ break;
+#endif
default:
return -EINVAL;
}
.notifier_call = radeonfb_panic,
};
-static int radeon_align_pitch(struct radeon_device *rdev, int width, int bpp)
+static int radeon_align_pitch(struct radeon_device *rdev, int width, int bpp, bool tiled)
{
int aligned = width;
- int align_large = (ASIC_IS_AVIVO(rdev));
+ int align_large = (ASIC_IS_AVIVO(rdev)) || tiled;
int pitch_mask = 0;
switch (bpp / 8) {
u64 fb_gpuaddr;
void *fbptr = NULL;
unsigned long tmp;
+ bool fb_tiled = false; /* useful for testing */
mode_cmd.width = surface_width;
mode_cmd.height = surface_height;
mode_cmd.bpp = 32;
/* need to align pitch with crtc limits */
- mode_cmd.pitch = radeon_align_pitch(rdev, mode_cmd.width, mode_cmd.bpp) * ((mode_cmd.bpp + 1) / 8);
+ mode_cmd.pitch = radeon_align_pitch(rdev, mode_cmd.width, mode_cmd.bpp, fb_tiled) * ((mode_cmd.bpp + 1) / 8);
mode_cmd.depth = 24;
size = mode_cmd.pitch * mode_cmd.height;
}
robj = gobj->driver_private;
+ if (fb_tiled)
+ radeon_object_set_tiling_flags(robj, RADEON_TILING_MACRO|RADEON_TILING_SURFACE, mode_cmd.pitch);
mutex_lock(&rdev->ddev->struct_mutex);
fb = radeon_framebuffer_create(rdev->ddev, &mode_cmd, gobj);
if (fb == NULL) {
}
rfbdev = info->par;
+ if (fb_tiled)
+ radeon_object_check_tiling(robj, 0, 0);
+
ret = radeon_object_kmap(robj, &fbptr);
if (ret) {
goto out_unref;
}
+ memset_io(fbptr, 0, aligned_size);
+
strcpy(info->fix.id, "radeondrmfb");
info->fix.type = FB_TYPE_PACKED_PIXELS;
info->fix.visual = FB_VISUAL_TRUECOLOR;
info->var.width = -1;
info->var.xres = fb_width;
info->var.yres = fb_height;
+
+ /* setup aperture base/size for vesafb takeover */
+ info->aperture_base = rdev->ddev->mode_config.fb_base;
+ info->aperture_size = rdev->mc.real_vram_size;
+
info->fix.mmio_start = 0;
info->fix.mmio_len = 0;
info->pixmap.size = 64*1024;
info->var.transp.offset = 0;
info->var.transp.length = 0;
break;
+#ifdef __LITTLE_ENDIAN
case 15:
info->var.red.offset = 10;
info->var.green.offset = 5;
info->var.transp.offset = 24;
info->var.transp.length = 8;
break;
+#else
+ case 24:
+ info->var.red.offset = 8;
+ info->var.green.offset = 16;
+ info->var.blue.offset = 24;
+ info->var.red.length = 8;
+ info->var.green.length = 8;
+ info->var.blue.length = 8;
+ info->var.transp.offset = 0;
+ info->var.transp.length = 0;
+ break;
+ case 32:
+ info->var.red.offset = 8;
+ info->var.green.offset = 16;
+ info->var.blue.offset = 24;
+ info->var.red.length = 8;
+ info->var.green.length = 8;
+ info->var.blue.length = 8;
+ info->var.transp.offset = 0;
+ info->var.transp.length = 8;
+ break;
default:
+#endif
break;
}
r = wait_event_interruptible_timeout(rdev->fence_drv.queue,
radeon_fence_signaled(fence), timeout);
if (unlikely(r == -ERESTARTSYS)) {
- return -ERESTART;
+ return -EBUSY;
}
} else {
r = wait_event_timeout(rdev->fence_drv.queue,
return -ENOMEM;
}
rdev->gart.pages[p] = pagelist[i];
- page_base = (uint32_t)rdev->gart.pages_addr[p];
+ page_base = rdev->gart.pages_addr[p];
for (j = 0; j < (PAGE_SIZE / 4096); j++, t++) {
radeon_gart_set_page(rdev, t, page_base);
page_base += 4096;
struct radeon_device *rdev = dev->dev_private;
struct drm_radeon_gem_info *args = data;
- args->vram_size = rdev->mc.vram_size;
+ args->vram_size = rdev->mc.real_vram_size;
/* FIXME: report somethings that makes sense */
- args->vram_visible = rdev->mc.vram_size - (4 * 1024 * 1024);
+ args->vram_visible = rdev->mc.real_vram_size - (4 * 1024 * 1024);
args->gart_size = rdev->mc.gtt_size;
return 0;
}
int radeon_gem_busy_ioctl(struct drm_device *dev, void *data,
struct drm_file *filp)
{
- /* FIXME: implement */
- return 0;
+ struct drm_radeon_gem_busy *args = data;
+ struct drm_gem_object *gobj;
+ struct radeon_object *robj;
+ int r;
+ uint32_t cur_placement;
+
+ gobj = drm_gem_object_lookup(dev, filp, args->handle);
+ if (gobj == NULL) {
+ return -EINVAL;
+ }
+ robj = gobj->driver_private;
+ r = radeon_object_busy_domain(robj, &cur_placement);
+ switch (cur_placement) {
+ case TTM_PL_VRAM:
+ args->domain = RADEON_GEM_DOMAIN_VRAM;
+ break;
+ case TTM_PL_TT:
+ args->domain = RADEON_GEM_DOMAIN_GTT;
+ break;
+ case TTM_PL_SYSTEM:
+ args->domain = RADEON_GEM_DOMAIN_CPU;
+ default:
+ break;
+ }
+ mutex_lock(&dev->struct_mutex);
+ drm_gem_object_unreference(gobj);
+ mutex_unlock(&dev->struct_mutex);
+ return r;
}
int radeon_gem_wait_idle_ioctl(struct drm_device *dev, void *data,
mutex_unlock(&dev->struct_mutex);
return r;
}
+
+int radeon_gem_set_tiling_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *filp)
+{
+ struct drm_radeon_gem_set_tiling *args = data;
+ struct drm_gem_object *gobj;
+ struct radeon_object *robj;
+ int r = 0;
+
+ DRM_DEBUG("%d \n", args->handle);
+ gobj = drm_gem_object_lookup(dev, filp, args->handle);
+ if (gobj == NULL)
+ return -EINVAL;
+ robj = gobj->driver_private;
+ radeon_object_set_tiling_flags(robj, args->tiling_flags, args->pitch);
+ mutex_lock(&dev->struct_mutex);
+ drm_gem_object_unreference(gobj);
+ mutex_unlock(&dev->struct_mutex);
+ return r;
+}
+
+int radeon_gem_get_tiling_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *filp)
+{
+ struct drm_radeon_gem_get_tiling *args = data;
+ struct drm_gem_object *gobj;
+ struct radeon_object *robj;
+ int r = 0;
+
+ DRM_DEBUG("\n");
+ gobj = drm_gem_object_lookup(dev, filp, args->handle);
+ if (gobj == NULL)
+ return -EINVAL;
+ robj = gobj->driver_private;
+ radeon_object_get_tiling_flags(robj, &args->tiling_flags,
+ &args->pitch);
+ mutex_lock(&dev->struct_mutex);
+ drm_gem_object_unreference(gobj);
+ mutex_unlock(&dev->struct_mutex);
+ return r;
+}
#include "radeon.h"
#include "atom.h"
-static inline uint32_t r100_irq_ack(struct radeon_device *rdev)
-{
- uint32_t irqs = RREG32(RADEON_GEN_INT_STATUS);
- uint32_t irq_mask = RADEON_SW_INT_TEST;
-
- if (irqs) {
- WREG32(RADEON_GEN_INT_STATUS, irqs);
- }
- return irqs & irq_mask;
-}
-
-int r100_irq_set(struct radeon_device *rdev)
-{
- uint32_t tmp = 0;
-
- if (rdev->irq.sw_int) {
- tmp |= RADEON_SW_INT_ENABLE;
- }
- /* Todo go through CRTC and enable vblank int or not */
- WREG32(RADEON_GEN_INT_CNTL, tmp);
- return 0;
-}
-
-int r100_irq_process(struct radeon_device *rdev)
-{
- uint32_t status;
-
- status = r100_irq_ack(rdev);
- if (!status) {
- return IRQ_NONE;
- }
- while (status) {
- /* SW interrupt */
- if (status & RADEON_SW_INT_TEST) {
- radeon_fence_process(rdev);
- }
- status = r100_irq_ack(rdev);
- }
- return IRQ_HANDLED;
-}
-
-int rs600_irq_set(struct radeon_device *rdev)
-{
- uint32_t tmp = 0;
-
- if (rdev->irq.sw_int) {
- tmp |= RADEON_SW_INT_ENABLE;
- }
- WREG32(RADEON_GEN_INT_CNTL, tmp);
- /* Todo go through CRTC and enable vblank int or not */
- WREG32(R500_DxMODE_INT_MASK, 0);
- return 0;
-}
-
irqreturn_t radeon_driver_irq_handler_kms(DRM_IRQ_ARGS)
{
struct drm_device *dev = (struct drm_device *) arg;
if (r) {
DRM_ERROR("Failed to initialize radeon, disabling IOCTL\n");
radeon_device_fini(rdev);
+ kfree(rdev);
+ dev->dev_private = NULL;
return r;
}
return 0;
case RADEON_INFO_NUM_GB_PIPES:
value = rdev->num_gb_pipes;
break;
+ case RADEON_INFO_NUM_Z_PIPES:
+ value = rdev->num_z_pipes;
+ break;
default:
DRM_DEBUG("Invalid request %d\n", info->request);
return -EINVAL;
*/
u32 radeon_get_vblank_counter_kms(struct drm_device *dev, int crtc)
{
- /* FIXME: implement */
- return 0;
+ struct radeon_device *rdev = dev->dev_private;
+
+ if (crtc < 0 || crtc > 1) {
+ DRM_ERROR("Invalid crtc %d\n", crtc);
+ return -EINVAL;
+ }
+
+ return radeon_get_vblank_counter(rdev, crtc);
}
int radeon_enable_vblank_kms(struct drm_device *dev, int crtc)
{
- /* FIXME: implement */
- return 0;
+ struct radeon_device *rdev = dev->dev_private;
+
+ if (crtc < 0 || crtc > 1) {
+ DRM_ERROR("Invalid crtc %d\n", crtc);
+ return -EINVAL;
+ }
+
+ rdev->irq.crtc_vblank_int[crtc] = true;
+
+ return radeon_irq_set(rdev);
}
void radeon_disable_vblank_kms(struct drm_device *dev, int crtc)
{
- /* FIXME: implement */
+ struct radeon_device *rdev = dev->dev_private;
+
+ if (crtc < 0 || crtc > 1) {
+ DRM_ERROR("Invalid crtc %d\n", crtc);
+ return;
+ }
+
+ rdev->irq.crtc_vblank_int[crtc] = false;
+
+ radeon_irq_set(rdev);
}
DRM_IOCTL_DEF(DRM_RADEON_GEM_WAIT_IDLE, radeon_gem_wait_idle_ioctl, DRM_AUTH),
DRM_IOCTL_DEF(DRM_RADEON_CS, radeon_cs_ioctl, DRM_AUTH),
DRM_IOCTL_DEF(DRM_RADEON_INFO, radeon_info_ioctl, DRM_AUTH),
+ DRM_IOCTL_DEF(DRM_RADEON_GEM_SET_TILING, radeon_gem_set_tiling_ioctl, DRM_AUTH),
+ DRM_IOCTL_DEF(DRM_RADEON_GEM_GET_TILING, radeon_gem_get_tiling_ioctl, DRM_AUTH),
+ DRM_IOCTL_DEF(DRM_RADEON_GEM_BUSY, radeon_gem_busy_ioctl, DRM_AUTH),
};
int radeon_max_kms_ioctl = DRM_ARRAY_SIZE(radeon_ioctls_kms);
#include "radeon_fixed.h"
#include "radeon.h"
+static void radeon_legacy_rmx_mode_set(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct drm_device *dev = crtc->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+ int xres = mode->hdisplay;
+ int yres = mode->vdisplay;
+ bool hscale = true, vscale = true;
+ int hsync_wid;
+ int vsync_wid;
+ int hsync_start;
+ int blank_width;
+ u32 scale, inc, crtc_more_cntl;
+ u32 fp_horz_stretch, fp_vert_stretch, fp_horz_vert_active;
+ u32 fp_h_sync_strt_wid, fp_crtc_h_total_disp;
+ u32 fp_v_sync_strt_wid, fp_crtc_v_total_disp;
+ struct radeon_native_mode *native_mode = &radeon_crtc->native_mode;
+
+ fp_vert_stretch = RREG32(RADEON_FP_VERT_STRETCH) &
+ (RADEON_VERT_STRETCH_RESERVED |
+ RADEON_VERT_AUTO_RATIO_INC);
+ fp_horz_stretch = RREG32(RADEON_FP_HORZ_STRETCH) &
+ (RADEON_HORZ_FP_LOOP_STRETCH |
+ RADEON_HORZ_AUTO_RATIO_INC);
+
+ crtc_more_cntl = 0;
+ if ((rdev->family == CHIP_RS100) ||
+ (rdev->family == CHIP_RS200)) {
+ /* This is to workaround the asic bug for RMX, some versions
+ of BIOS dosen't have this register initialized correctly. */
+ crtc_more_cntl |= RADEON_CRTC_H_CUTOFF_ACTIVE_EN;
+ }
+
+
+ fp_crtc_h_total_disp = ((((mode->crtc_htotal / 8) - 1) & 0x3ff)
+ | ((((mode->crtc_hdisplay / 8) - 1) & 0x1ff) << 16));
+
+ hsync_wid = (mode->crtc_hsync_end - mode->crtc_hsync_start) / 8;
+ if (!hsync_wid)
+ hsync_wid = 1;
+ hsync_start = mode->crtc_hsync_start - 8;
+
+ fp_h_sync_strt_wid = ((hsync_start & 0x1fff)
+ | ((hsync_wid & 0x3f) << 16)
+ | ((mode->flags & DRM_MODE_FLAG_NHSYNC)
+ ? RADEON_CRTC_H_SYNC_POL
+ : 0));
+
+ fp_crtc_v_total_disp = (((mode->crtc_vtotal - 1) & 0xffff)
+ | ((mode->crtc_vdisplay - 1) << 16));
+
+ vsync_wid = mode->crtc_vsync_end - mode->crtc_vsync_start;
+ if (!vsync_wid)
+ vsync_wid = 1;
+
+ fp_v_sync_strt_wid = (((mode->crtc_vsync_start - 1) & 0xfff)
+ | ((vsync_wid & 0x1f) << 16)
+ | ((mode->flags & DRM_MODE_FLAG_NVSYNC)
+ ? RADEON_CRTC_V_SYNC_POL
+ : 0));
+
+ fp_horz_vert_active = 0;
+
+ if (native_mode->panel_xres == 0 ||
+ native_mode->panel_yres == 0) {
+ hscale = false;
+ vscale = false;
+ } else {
+ if (xres > native_mode->panel_xres)
+ xres = native_mode->panel_xres;
+ if (yres > native_mode->panel_yres)
+ yres = native_mode->panel_yres;
+
+ if (xres == native_mode->panel_xres)
+ hscale = false;
+ if (yres == native_mode->panel_yres)
+ vscale = false;
+ }
+
+ switch (radeon_crtc->rmx_type) {
+ case RMX_FULL:
+ case RMX_ASPECT:
+ if (!hscale)
+ fp_horz_stretch |= ((xres/8-1) << 16);
+ else {
+ inc = (fp_horz_stretch & RADEON_HORZ_AUTO_RATIO_INC) ? 1 : 0;
+ scale = ((xres + inc) * RADEON_HORZ_STRETCH_RATIO_MAX)
+ / native_mode->panel_xres + 1;
+ fp_horz_stretch |= (((scale) & RADEON_HORZ_STRETCH_RATIO_MASK) |
+ RADEON_HORZ_STRETCH_BLEND |
+ RADEON_HORZ_STRETCH_ENABLE |
+ ((native_mode->panel_xres/8-1) << 16));
+ }
+
+ if (!vscale)
+ fp_vert_stretch |= ((yres-1) << 12);
+ else {
+ inc = (fp_vert_stretch & RADEON_VERT_AUTO_RATIO_INC) ? 1 : 0;
+ scale = ((yres + inc) * RADEON_VERT_STRETCH_RATIO_MAX)
+ / native_mode->panel_yres + 1;
+ fp_vert_stretch |= (((scale) & RADEON_VERT_STRETCH_RATIO_MASK) |
+ RADEON_VERT_STRETCH_ENABLE |
+ RADEON_VERT_STRETCH_BLEND |
+ ((native_mode->panel_yres-1) << 12));
+ }
+ break;
+ case RMX_CENTER:
+ fp_horz_stretch |= ((xres/8-1) << 16);
+ fp_vert_stretch |= ((yres-1) << 12);
+
+ crtc_more_cntl |= (RADEON_CRTC_AUTO_HORZ_CENTER_EN |
+ RADEON_CRTC_AUTO_VERT_CENTER_EN);
+
+ blank_width = (mode->crtc_hblank_end - mode->crtc_hblank_start) / 8;
+ if (blank_width > 110)
+ blank_width = 110;
+
+ fp_crtc_h_total_disp = (((blank_width) & 0x3ff)
+ | ((((mode->crtc_hdisplay / 8) - 1) & 0x1ff) << 16));
+
+ hsync_wid = (mode->crtc_hsync_end - mode->crtc_hsync_start) / 8;
+ if (!hsync_wid)
+ hsync_wid = 1;
+
+ fp_h_sync_strt_wid = ((((mode->crtc_hsync_start - mode->crtc_hblank_start) / 8) & 0x1fff)
+ | ((hsync_wid & 0x3f) << 16)
+ | ((mode->flags & DRM_MODE_FLAG_NHSYNC)
+ ? RADEON_CRTC_H_SYNC_POL
+ : 0));
+
+ fp_crtc_v_total_disp = (((mode->crtc_vblank_end - mode->crtc_vblank_start) & 0xffff)
+ | ((mode->crtc_vdisplay - 1) << 16));
+
+ vsync_wid = mode->crtc_vsync_end - mode->crtc_vsync_start;
+ if (!vsync_wid)
+ vsync_wid = 1;
+
+ fp_v_sync_strt_wid = ((((mode->crtc_vsync_start - mode->crtc_vblank_start) & 0xfff)
+ | ((vsync_wid & 0x1f) << 16)
+ | ((mode->flags & DRM_MODE_FLAG_NVSYNC)
+ ? RADEON_CRTC_V_SYNC_POL
+ : 0)));
+
+ fp_horz_vert_active = (((native_mode->panel_yres) & 0xfff) |
+ (((native_mode->panel_xres / 8) & 0x1ff) << 16));
+ break;
+ case RMX_OFF:
+ default:
+ fp_horz_stretch |= ((xres/8-1) << 16);
+ fp_vert_stretch |= ((yres-1) << 12);
+ break;
+ }
+
+ WREG32(RADEON_FP_HORZ_STRETCH, fp_horz_stretch);
+ WREG32(RADEON_FP_VERT_STRETCH, fp_vert_stretch);
+ WREG32(RADEON_CRTC_MORE_CNTL, crtc_more_cntl);
+ WREG32(RADEON_FP_HORZ_VERT_ACTIVE, fp_horz_vert_active);
+ WREG32(RADEON_FP_H_SYNC_STRT_WID, fp_h_sync_strt_wid);
+ WREG32(RADEON_FP_V_SYNC_STRT_WID, fp_v_sync_strt_wid);
+ WREG32(RADEON_FP_CRTC_H_TOTAL_DISP, fp_crtc_h_total_disp);
+ WREG32(RADEON_FP_CRTC_V_TOTAL_DISP, fp_crtc_v_total_disp);
+}
+
void radeon_restore_common_regs(struct drm_device *dev)
{
/* don't need this yet */
RADEON_CRTC_DISP_REQ_EN_B));
WREG32_P(RADEON_CRTC_EXT_CNTL, 0, ~mask);
}
+ drm_vblank_post_modeset(dev, radeon_crtc->crtc_id);
+ radeon_crtc_load_lut(crtc);
break;
case DRM_MODE_DPMS_STANDBY:
case DRM_MODE_DPMS_SUSPEND:
case DRM_MODE_DPMS_OFF:
+ drm_vblank_pre_modeset(dev, radeon_crtc->crtc_id);
if (radeon_crtc->crtc_id)
WREG32_P(RADEON_CRTC2_GEN_CNTL, mask, ~mask);
else {
}
break;
}
-
- if (mode != DRM_MODE_DPMS_OFF) {
- radeon_crtc_load_lut(crtc);
- }
}
/* properly set crtc bpp when using atombios */
uint64_t base;
uint32_t crtc_offset, crtc_offset_cntl, crtc_tile_x0_y0 = 0;
uint32_t crtc_pitch, pitch_pixels;
+ uint32_t tiling_flags;
DRM_DEBUG("\n");
if (radeon_gem_object_pin(obj, RADEON_GEM_DOMAIN_VRAM, &base)) {
return -EINVAL;
}
- crtc_offset = (u32)base;
+ /* if scanout was in GTT this really wouldn't work */
+ /* crtc offset is from display base addr not FB location */
+ radeon_crtc->legacy_display_base_addr = rdev->mc.vram_location;
+
+ base -= radeon_crtc->legacy_display_base_addr;
+
crtc_offset_cntl = 0;
pitch_pixels = crtc->fb->pitch / (crtc->fb->bits_per_pixel / 8);
(crtc->fb->bits_per_pixel * 8));
crtc_pitch |= crtc_pitch << 16;
- /* TODO tiling */
- if (0) {
+ radeon_object_get_tiling_flags(obj->driver_private,
+ &tiling_flags, NULL);
+ if (tiling_flags & RADEON_TILING_MICRO)
+ DRM_ERROR("trying to scanout microtiled buffer\n");
+
+ if (tiling_flags & RADEON_TILING_MACRO) {
if (ASIC_IS_R300(rdev))
crtc_offset_cntl |= (R300_CRTC_X_Y_MODE_EN |
R300_CRTC_MICRO_TILE_BUFFER_DIS |
crtc_offset_cntl &= ~RADEON_CRTC_TILE_EN;
}
-
- /* TODO more tiling */
- if (0) {
+ if (tiling_flags & RADEON_TILING_MACRO) {
if (ASIC_IS_R300(rdev)) {
crtc_tile_x0_y0 = x | (y << 16);
base &= ~0x7ff;
} else {
int byteshift = crtc->fb->bits_per_pixel >> 4;
- int tile_addr = (((y >> 3) * crtc->fb->width + x) >> (8 - byteshift)) << 11;
+ int tile_addr = (((y >> 3) * pitch_pixels + x) >> (8 - byteshift)) << 11;
base += tile_addr + ((x << byteshift) % 256) + ((y % 8) << 8);
crtc_offset_cntl |= (y % 16);
}
base &= ~7;
- /* update sarea TODO */
-
crtc_offset = (u32)base;
- WREG32(RADEON_DISPLAY_BASE_ADDR + radeon_crtc->crtc_offset, rdev->mc.vram_location);
+ WREG32(RADEON_DISPLAY_BASE_ADDR + radeon_crtc->crtc_offset, radeon_crtc->legacy_display_base_addr);
if (ASIC_IS_R300(rdev)) {
if (radeon_crtc->crtc_id)
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
+ if (!radeon_crtc_scaling_mode_fixup(crtc, mode, adjusted_mode))
+ return false;
return true;
}
struct drm_display_mode *adjusted_mode,
int x, int y, struct drm_framebuffer *old_fb)
{
-
- DRM_DEBUG("\n");
+ struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+ struct drm_device *dev = crtc->dev;
+ struct radeon_device *rdev = dev->dev_private;
/* TODO TV */
-
radeon_crtc_set_base(crtc, x, y, old_fb);
radeon_set_crtc_timing(crtc, adjusted_mode);
radeon_set_pll(crtc, adjusted_mode);
- radeon_init_disp_bandwidth(crtc->dev);
-
+ radeon_bandwidth_update(rdev);
+ if (radeon_crtc->crtc_id == 0) {
+ radeon_legacy_rmx_mode_set(crtc, mode, adjusted_mode);
+ } else {
+ if (radeon_crtc->rmx_type != RMX_OFF) {
+ /* FIXME: only first crtc has rmx what should we
+ * do ?
+ */
+ DRM_ERROR("Mode need scaling but only first crtc can do that.\n");
+ }
+ }
return 0;
}
radeon_crtc->crtc_offset = RADEON_CRTC2_H_TOTAL_DISP - RADEON_CRTC_H_TOTAL_DISP;
drm_crtc_helper_add(&radeon_crtc->base, &legacy_helper_funcs);
}
-
-void radeon_init_disp_bw_legacy(struct drm_device *dev,
- struct drm_display_mode *mode1,
- uint32_t pixel_bytes1,
- struct drm_display_mode *mode2,
- uint32_t pixel_bytes2)
-{
- struct radeon_device *rdev = dev->dev_private;
- fixed20_12 trcd_ff, trp_ff, tras_ff, trbs_ff, tcas_ff;
- fixed20_12 sclk_ff, mclk_ff, sclk_eff_ff, sclk_delay_ff;
- fixed20_12 peak_disp_bw, mem_bw, pix_clk, pix_clk2, temp_ff, crit_point_ff;
- uint32_t temp, data, mem_trcd, mem_trp, mem_tras;
- fixed20_12 memtcas_ff[8] = {
- fixed_init(1),
- fixed_init(2),
- fixed_init(3),
- fixed_init(0),
- fixed_init_half(1),
- fixed_init_half(2),
- fixed_init(0),
- };
- fixed20_12 memtcas_rs480_ff[8] = {
- fixed_init(0),
- fixed_init(1),
- fixed_init(2),
- fixed_init(3),
- fixed_init(0),
- fixed_init_half(1),
- fixed_init_half(2),
- fixed_init_half(3),
- };
- fixed20_12 memtcas2_ff[8] = {
- fixed_init(0),
- fixed_init(1),
- fixed_init(2),
- fixed_init(3),
- fixed_init(4),
- fixed_init(5),
- fixed_init(6),
- fixed_init(7),
- };
- fixed20_12 memtrbs[8] = {
- fixed_init(1),
- fixed_init_half(1),
- fixed_init(2),
- fixed_init_half(2),
- fixed_init(3),
- fixed_init_half(3),
- fixed_init(4),
- fixed_init_half(4)
- };
- fixed20_12 memtrbs_r4xx[8] = {
- fixed_init(4),
- fixed_init(5),
- fixed_init(6),
- fixed_init(7),
- fixed_init(8),
- fixed_init(9),
- fixed_init(10),
- fixed_init(11)
- };
- fixed20_12 min_mem_eff;
- fixed20_12 mc_latency_sclk, mc_latency_mclk, k1;
- fixed20_12 cur_latency_mclk, cur_latency_sclk;
- fixed20_12 disp_latency, disp_latency_overhead, disp_drain_rate,
- disp_drain_rate2, read_return_rate;
- fixed20_12 time_disp1_drop_priority;
- int c;
- int cur_size = 16; /* in octawords */
- int critical_point = 0, critical_point2;
-/* uint32_t read_return_rate, time_disp1_drop_priority; */
- int stop_req, max_stop_req;
-
- min_mem_eff.full = rfixed_const_8(0);
- /* get modes */
- if ((rdev->disp_priority == 2) && ASIC_IS_R300(rdev)) {
- uint32_t mc_init_misc_lat_timer = RREG32(R300_MC_INIT_MISC_LAT_TIMER);
- mc_init_misc_lat_timer &= ~(R300_MC_DISP1R_INIT_LAT_MASK << R300_MC_DISP1R_INIT_LAT_SHIFT);
- mc_init_misc_lat_timer &= ~(R300_MC_DISP0R_INIT_LAT_MASK << R300_MC_DISP0R_INIT_LAT_SHIFT);
- /* check crtc enables */
- if (mode2)
- mc_init_misc_lat_timer |= (1 << R300_MC_DISP1R_INIT_LAT_SHIFT);
- if (mode1)
- mc_init_misc_lat_timer |= (1 << R300_MC_DISP0R_INIT_LAT_SHIFT);
- WREG32(R300_MC_INIT_MISC_LAT_TIMER, mc_init_misc_lat_timer);
- }
-
- /*
- * determine is there is enough bw for current mode
- */
- mclk_ff.full = rfixed_const(rdev->clock.default_mclk);
- temp_ff.full = rfixed_const(100);
- mclk_ff.full = rfixed_div(mclk_ff, temp_ff);
- sclk_ff.full = rfixed_const(rdev->clock.default_sclk);
- sclk_ff.full = rfixed_div(sclk_ff, temp_ff);
-
- temp = (rdev->mc.vram_width / 8) * (rdev->mc.vram_is_ddr ? 2 : 1);
- temp_ff.full = rfixed_const(temp);
- mem_bw.full = rfixed_mul(mclk_ff, temp_ff);
-
- pix_clk.full = 0;
- pix_clk2.full = 0;
- peak_disp_bw.full = 0;
- if (mode1) {
- temp_ff.full = rfixed_const(1000);
- pix_clk.full = rfixed_const(mode1->clock); /* convert to fixed point */
- pix_clk.full = rfixed_div(pix_clk, temp_ff);
- temp_ff.full = rfixed_const(pixel_bytes1);
- peak_disp_bw.full += rfixed_mul(pix_clk, temp_ff);
- }
- if (mode2) {
- temp_ff.full = rfixed_const(1000);
- pix_clk2.full = rfixed_const(mode2->clock); /* convert to fixed point */
- pix_clk2.full = rfixed_div(pix_clk2, temp_ff);
- temp_ff.full = rfixed_const(pixel_bytes2);
- peak_disp_bw.full += rfixed_mul(pix_clk2, temp_ff);
- }
-
- mem_bw.full = rfixed_mul(mem_bw, min_mem_eff);
- if (peak_disp_bw.full >= mem_bw.full) {
- DRM_ERROR("You may not have enough display bandwidth for current mode\n"
- "If you have flickering problem, try to lower resolution, refresh rate, or color depth\n");
- }
-
- /* Get values from the EXT_MEM_CNTL register...converting its contents. */
- temp = RREG32(RADEON_MEM_TIMING_CNTL);
- if ((rdev->family == CHIP_RV100) || (rdev->flags & RADEON_IS_IGP)) { /* RV100, M6, IGPs */
- mem_trcd = ((temp >> 2) & 0x3) + 1;
- mem_trp = ((temp & 0x3)) + 1;
- mem_tras = ((temp & 0x70) >> 4) + 1;
- } else if (rdev->family == CHIP_R300 ||
- rdev->family == CHIP_R350) { /* r300, r350 */
- mem_trcd = (temp & 0x7) + 1;
- mem_trp = ((temp >> 8) & 0x7) + 1;
- mem_tras = ((temp >> 11) & 0xf) + 4;
- } else if (rdev->family == CHIP_RV350 ||
- rdev->family <= CHIP_RV380) {
- /* rv3x0 */
- mem_trcd = (temp & 0x7) + 3;
- mem_trp = ((temp >> 8) & 0x7) + 3;
- mem_tras = ((temp >> 11) & 0xf) + 6;
- } else if (rdev->family == CHIP_R420 ||
- rdev->family == CHIP_R423 ||
- rdev->family == CHIP_RV410) {
- /* r4xx */
- mem_trcd = (temp & 0xf) + 3;
- if (mem_trcd > 15)
- mem_trcd = 15;
- mem_trp = ((temp >> 8) & 0xf) + 3;
- if (mem_trp > 15)
- mem_trp = 15;
- mem_tras = ((temp >> 12) & 0x1f) + 6;
- if (mem_tras > 31)
- mem_tras = 31;
- } else { /* RV200, R200 */
- mem_trcd = (temp & 0x7) + 1;
- mem_trp = ((temp >> 8) & 0x7) + 1;
- mem_tras = ((temp >> 12) & 0xf) + 4;
- }
- /* convert to FF */
- trcd_ff.full = rfixed_const(mem_trcd);
- trp_ff.full = rfixed_const(mem_trp);
- tras_ff.full = rfixed_const(mem_tras);
-
- /* Get values from the MEM_SDRAM_MODE_REG register...converting its */
- temp = RREG32(RADEON_MEM_SDRAM_MODE_REG);
- data = (temp & (7 << 20)) >> 20;
- if ((rdev->family == CHIP_RV100) || rdev->flags & RADEON_IS_IGP) {
- if (rdev->family == CHIP_RS480) /* don't think rs400 */
- tcas_ff = memtcas_rs480_ff[data];
- else
- tcas_ff = memtcas_ff[data];
- } else
- tcas_ff = memtcas2_ff[data];
-
- if (rdev->family == CHIP_RS400 ||
- rdev->family == CHIP_RS480) {
- /* extra cas latency stored in bits 23-25 0-4 clocks */
- data = (temp >> 23) & 0x7;
- if (data < 5)
- tcas_ff.full += rfixed_const(data);
- }
-
- if (ASIC_IS_R300(rdev) && !(rdev->flags & RADEON_IS_IGP)) {
- /* on the R300, Tcas is included in Trbs.
- */
- temp = RREG32(RADEON_MEM_CNTL);
- data = (R300_MEM_NUM_CHANNELS_MASK & temp);
- if (data == 1) {
- if (R300_MEM_USE_CD_CH_ONLY & temp) {
- temp = RREG32(R300_MC_IND_INDEX);
- temp &= ~R300_MC_IND_ADDR_MASK;
- temp |= R300_MC_READ_CNTL_CD_mcind;
- WREG32(R300_MC_IND_INDEX, temp);
- temp = RREG32(R300_MC_IND_DATA);
- data = (R300_MEM_RBS_POSITION_C_MASK & temp);
- } else {
- temp = RREG32(R300_MC_READ_CNTL_AB);
- data = (R300_MEM_RBS_POSITION_A_MASK & temp);
- }
- } else {
- temp = RREG32(R300_MC_READ_CNTL_AB);
- data = (R300_MEM_RBS_POSITION_A_MASK & temp);
- }
- if (rdev->family == CHIP_RV410 ||
- rdev->family == CHIP_R420 ||
- rdev->family == CHIP_R423)
- trbs_ff = memtrbs_r4xx[data];
- else
- trbs_ff = memtrbs[data];
- tcas_ff.full += trbs_ff.full;
- }
-
- sclk_eff_ff.full = sclk_ff.full;
-
- if (rdev->flags & RADEON_IS_AGP) {
- fixed20_12 agpmode_ff;
- agpmode_ff.full = rfixed_const(radeon_agpmode);
- temp_ff.full = rfixed_const_666(16);
- sclk_eff_ff.full -= rfixed_mul(agpmode_ff, temp_ff);
- }
- /* TODO PCIE lanes may affect this - agpmode == 16?? */
-
- if (ASIC_IS_R300(rdev)) {
- sclk_delay_ff.full = rfixed_const(250);
- } else {
- if ((rdev->family == CHIP_RV100) ||
- rdev->flags & RADEON_IS_IGP) {
- if (rdev->mc.vram_is_ddr)
- sclk_delay_ff.full = rfixed_const(41);
- else
- sclk_delay_ff.full = rfixed_const(33);
- } else {
- if (rdev->mc.vram_width == 128)
- sclk_delay_ff.full = rfixed_const(57);
- else
- sclk_delay_ff.full = rfixed_const(41);
- }
- }
-
- mc_latency_sclk.full = rfixed_div(sclk_delay_ff, sclk_eff_ff);
-
- if (rdev->mc.vram_is_ddr) {
- if (rdev->mc.vram_width == 32) {
- k1.full = rfixed_const(40);
- c = 3;
- } else {
- k1.full = rfixed_const(20);
- c = 1;
- }
- } else {
- k1.full = rfixed_const(40);
- c = 3;
- }
-
- temp_ff.full = rfixed_const(2);
- mc_latency_mclk.full = rfixed_mul(trcd_ff, temp_ff);
- temp_ff.full = rfixed_const(c);
- mc_latency_mclk.full += rfixed_mul(tcas_ff, temp_ff);
- temp_ff.full = rfixed_const(4);
- mc_latency_mclk.full += rfixed_mul(tras_ff, temp_ff);
- mc_latency_mclk.full += rfixed_mul(trp_ff, temp_ff);
- mc_latency_mclk.full += k1.full;
-
- mc_latency_mclk.full = rfixed_div(mc_latency_mclk, mclk_ff);
- mc_latency_mclk.full += rfixed_div(temp_ff, sclk_eff_ff);
-
- /*
- HW cursor time assuming worst case of full size colour cursor.
- */
- temp_ff.full = rfixed_const((2 * (cur_size - (rdev->mc.vram_is_ddr + 1))));
- temp_ff.full += trcd_ff.full;
- if (temp_ff.full < tras_ff.full)
- temp_ff.full = tras_ff.full;
- cur_latency_mclk.full = rfixed_div(temp_ff, mclk_ff);
-
- temp_ff.full = rfixed_const(cur_size);
- cur_latency_sclk.full = rfixed_div(temp_ff, sclk_eff_ff);
- /*
- Find the total latency for the display data.
- */
- disp_latency_overhead.full = rfixed_const(80);
- disp_latency_overhead.full = rfixed_div(disp_latency_overhead, sclk_ff);
- mc_latency_mclk.full += disp_latency_overhead.full + cur_latency_mclk.full;
- mc_latency_sclk.full += disp_latency_overhead.full + cur_latency_sclk.full;
-
- if (mc_latency_mclk.full > mc_latency_sclk.full)
- disp_latency.full = mc_latency_mclk.full;
- else
- disp_latency.full = mc_latency_sclk.full;
-
- /* setup Max GRPH_STOP_REQ default value */
- if (ASIC_IS_RV100(rdev))
- max_stop_req = 0x5c;
- else
- max_stop_req = 0x7c;
-
- if (mode1) {
- /* CRTC1
- Set GRPH_BUFFER_CNTL register using h/w defined optimal values.
- GRPH_STOP_REQ <= MIN[ 0x7C, (CRTC_H_DISP + 1) * (bit depth) / 0x10 ]
- */
- stop_req = mode1->hdisplay * pixel_bytes1 / 16;
-
- if (stop_req > max_stop_req)
- stop_req = max_stop_req;
-
- /*
- Find the drain rate of the display buffer.
- */
- temp_ff.full = rfixed_const((16/pixel_bytes1));
- disp_drain_rate.full = rfixed_div(pix_clk, temp_ff);
-
- /*
- Find the critical point of the display buffer.
- */
- crit_point_ff.full = rfixed_mul(disp_drain_rate, disp_latency);
- crit_point_ff.full += rfixed_const_half(0);
-
- critical_point = rfixed_trunc(crit_point_ff);
-
- if (rdev->disp_priority == 2) {
- critical_point = 0;
- }
-
- /*
- The critical point should never be above max_stop_req-4. Setting
- GRPH_CRITICAL_CNTL = 0 will thus force high priority all the time.
- */
- if (max_stop_req - critical_point < 4)
- critical_point = 0;
-
- if (critical_point == 0 && mode2 && rdev->family == CHIP_R300) {
- /* some R300 cards have problem with this set to 0, when CRTC2 is enabled.*/
- critical_point = 0x10;
- }
-
- temp = RREG32(RADEON_GRPH_BUFFER_CNTL);
- temp &= ~(RADEON_GRPH_STOP_REQ_MASK);
- temp |= (stop_req << RADEON_GRPH_STOP_REQ_SHIFT);
- temp &= ~(RADEON_GRPH_START_REQ_MASK);
- if ((rdev->family == CHIP_R350) &&
- (stop_req > 0x15)) {
- stop_req -= 0x10;
- }
- temp |= (stop_req << RADEON_GRPH_START_REQ_SHIFT);
- temp |= RADEON_GRPH_BUFFER_SIZE;
- temp &= ~(RADEON_GRPH_CRITICAL_CNTL |
- RADEON_GRPH_CRITICAL_AT_SOF |
- RADEON_GRPH_STOP_CNTL);
- /*
- Write the result into the register.
- */
- WREG32(RADEON_GRPH_BUFFER_CNTL, ((temp & ~RADEON_GRPH_CRITICAL_POINT_MASK) |
- (critical_point << RADEON_GRPH_CRITICAL_POINT_SHIFT)));
-
-#if 0
- if ((rdev->family == CHIP_RS400) ||
- (rdev->family == CHIP_RS480)) {
- /* attempt to program RS400 disp regs correctly ??? */
- temp = RREG32(RS400_DISP1_REG_CNTL);
- temp &= ~(RS400_DISP1_START_REQ_LEVEL_MASK |
- RS400_DISP1_STOP_REQ_LEVEL_MASK);
- WREG32(RS400_DISP1_REQ_CNTL1, (temp |
- (critical_point << RS400_DISP1_START_REQ_LEVEL_SHIFT) |
- (critical_point << RS400_DISP1_STOP_REQ_LEVEL_SHIFT)));
- temp = RREG32(RS400_DMIF_MEM_CNTL1);
- temp &= ~(RS400_DISP1_CRITICAL_POINT_START_MASK |
- RS400_DISP1_CRITICAL_POINT_STOP_MASK);
- WREG32(RS400_DMIF_MEM_CNTL1, (temp |
- (critical_point << RS400_DISP1_CRITICAL_POINT_START_SHIFT) |
- (critical_point << RS400_DISP1_CRITICAL_POINT_STOP_SHIFT)));
- }
-#endif
-
- DRM_DEBUG("GRPH_BUFFER_CNTL from to %x\n",
- /* (unsigned int)info->SavedReg->grph_buffer_cntl, */
- (unsigned int)RREG32(RADEON_GRPH_BUFFER_CNTL));
- }
-
- if (mode2) {
- u32 grph2_cntl;
- stop_req = mode2->hdisplay * pixel_bytes2 / 16;
-
- if (stop_req > max_stop_req)
- stop_req = max_stop_req;
-
- /*
- Find the drain rate of the display buffer.
- */
- temp_ff.full = rfixed_const((16/pixel_bytes2));
- disp_drain_rate2.full = rfixed_div(pix_clk2, temp_ff);
-
- grph2_cntl = RREG32(RADEON_GRPH2_BUFFER_CNTL);
- grph2_cntl &= ~(RADEON_GRPH_STOP_REQ_MASK);
- grph2_cntl |= (stop_req << RADEON_GRPH_STOP_REQ_SHIFT);
- grph2_cntl &= ~(RADEON_GRPH_START_REQ_MASK);
- if ((rdev->family == CHIP_R350) &&
- (stop_req > 0x15)) {
- stop_req -= 0x10;
- }
- grph2_cntl |= (stop_req << RADEON_GRPH_START_REQ_SHIFT);
- grph2_cntl |= RADEON_GRPH_BUFFER_SIZE;
- grph2_cntl &= ~(RADEON_GRPH_CRITICAL_CNTL |
- RADEON_GRPH_CRITICAL_AT_SOF |
- RADEON_GRPH_STOP_CNTL);
-
- if ((rdev->family == CHIP_RS100) ||
- (rdev->family == CHIP_RS200))
- critical_point2 = 0;
- else {
- temp = (rdev->mc.vram_width * rdev->mc.vram_is_ddr + 1)/128;
- temp_ff.full = rfixed_const(temp);
- temp_ff.full = rfixed_mul(mclk_ff, temp_ff);
- if (sclk_ff.full < temp_ff.full)
- temp_ff.full = sclk_ff.full;
-
- read_return_rate.full = temp_ff.full;
-
- if (mode1) {
- temp_ff.full = read_return_rate.full - disp_drain_rate.full;
- time_disp1_drop_priority.full = rfixed_div(crit_point_ff, temp_ff);
- } else {
- time_disp1_drop_priority.full = 0;
- }
- crit_point_ff.full = disp_latency.full + time_disp1_drop_priority.full + disp_latency.full;
- crit_point_ff.full = rfixed_mul(crit_point_ff, disp_drain_rate2);
- crit_point_ff.full += rfixed_const_half(0);
-
- critical_point2 = rfixed_trunc(crit_point_ff);
-
- if (rdev->disp_priority == 2) {
- critical_point2 = 0;
- }
-
- if (max_stop_req - critical_point2 < 4)
- critical_point2 = 0;
-
- }
-
- if (critical_point2 == 0 && rdev->family == CHIP_R300) {
- /* some R300 cards have problem with this set to 0 */
- critical_point2 = 0x10;
- }
-
- WREG32(RADEON_GRPH2_BUFFER_CNTL, ((grph2_cntl & ~RADEON_GRPH_CRITICAL_POINT_MASK) |
- (critical_point2 << RADEON_GRPH_CRITICAL_POINT_SHIFT)));
-
- if ((rdev->family == CHIP_RS400) ||
- (rdev->family == CHIP_RS480)) {
-#if 0
- /* attempt to program RS400 disp2 regs correctly ??? */
- temp = RREG32(RS400_DISP2_REQ_CNTL1);
- temp &= ~(RS400_DISP2_START_REQ_LEVEL_MASK |
- RS400_DISP2_STOP_REQ_LEVEL_MASK);
- WREG32(RS400_DISP2_REQ_CNTL1, (temp |
- (critical_point2 << RS400_DISP1_START_REQ_LEVEL_SHIFT) |
- (critical_point2 << RS400_DISP1_STOP_REQ_LEVEL_SHIFT)));
- temp = RREG32(RS400_DISP2_REQ_CNTL2);
- temp &= ~(RS400_DISP2_CRITICAL_POINT_START_MASK |
- RS400_DISP2_CRITICAL_POINT_STOP_MASK);
- WREG32(RS400_DISP2_REQ_CNTL2, (temp |
- (critical_point2 << RS400_DISP2_CRITICAL_POINT_START_SHIFT) |
- (critical_point2 << RS400_DISP2_CRITICAL_POINT_STOP_SHIFT)));
-#endif
- WREG32(RS400_DISP2_REQ_CNTL1, 0x105DC1CC);
- WREG32(RS400_DISP2_REQ_CNTL2, 0x2749D000);
- WREG32(RS400_DMIF_MEM_CNTL1, 0x29CA71DC);
- WREG32(RS400_DISP1_REQ_CNTL1, 0x28FBC3AC);
- }
-
- DRM_DEBUG("GRPH2_BUFFER_CNTL from to %x\n",
- (unsigned int)RREG32(RADEON_GRPH2_BUFFER_CNTL));
- }
-}
#include "atom.h"
-static void radeon_legacy_rmx_mode_set(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- struct drm_device *dev = encoder->dev;
- struct radeon_device *rdev = dev->dev_private;
- struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- int xres = mode->hdisplay;
- int yres = mode->vdisplay;
- bool hscale = true, vscale = true;
- int hsync_wid;
- int vsync_wid;
- int hsync_start;
- uint32_t scale, inc;
- uint32_t fp_horz_stretch, fp_vert_stretch, crtc_more_cntl, fp_horz_vert_active;
- uint32_t fp_h_sync_strt_wid, fp_v_sync_strt_wid, fp_crtc_h_total_disp, fp_crtc_v_total_disp;
- struct radeon_native_mode *native_mode = &radeon_encoder->native_mode;
-
- DRM_DEBUG("\n");
-
- fp_vert_stretch = RREG32(RADEON_FP_VERT_STRETCH) &
- (RADEON_VERT_STRETCH_RESERVED |
- RADEON_VERT_AUTO_RATIO_INC);
- fp_horz_stretch = RREG32(RADEON_FP_HORZ_STRETCH) &
- (RADEON_HORZ_FP_LOOP_STRETCH |
- RADEON_HORZ_AUTO_RATIO_INC);
-
- crtc_more_cntl = 0;
- if ((rdev->family == CHIP_RS100) ||
- (rdev->family == CHIP_RS200)) {
- /* This is to workaround the asic bug for RMX, some versions
- of BIOS dosen't have this register initialized correctly. */
- crtc_more_cntl |= RADEON_CRTC_H_CUTOFF_ACTIVE_EN;
- }
-
-
- fp_crtc_h_total_disp = ((((mode->crtc_htotal / 8) - 1) & 0x3ff)
- | ((((mode->crtc_hdisplay / 8) - 1) & 0x1ff) << 16));
-
- hsync_wid = (mode->crtc_hsync_end - mode->crtc_hsync_start) / 8;
- if (!hsync_wid)
- hsync_wid = 1;
- hsync_start = mode->crtc_hsync_start - 8;
-
- fp_h_sync_strt_wid = ((hsync_start & 0x1fff)
- | ((hsync_wid & 0x3f) << 16)
- | ((mode->flags & DRM_MODE_FLAG_NHSYNC)
- ? RADEON_CRTC_H_SYNC_POL
- : 0));
-
- fp_crtc_v_total_disp = (((mode->crtc_vtotal - 1) & 0xffff)
- | ((mode->crtc_vdisplay - 1) << 16));
-
- vsync_wid = mode->crtc_vsync_end - mode->crtc_vsync_start;
- if (!vsync_wid)
- vsync_wid = 1;
-
- fp_v_sync_strt_wid = (((mode->crtc_vsync_start - 1) & 0xfff)
- | ((vsync_wid & 0x1f) << 16)
- | ((mode->flags & DRM_MODE_FLAG_NVSYNC)
- ? RADEON_CRTC_V_SYNC_POL
- : 0));
-
- fp_horz_vert_active = 0;
-
- if (native_mode->panel_xres == 0 ||
- native_mode->panel_yres == 0) {
- hscale = false;
- vscale = false;
- } else {
- if (xres > native_mode->panel_xres)
- xres = native_mode->panel_xres;
- if (yres > native_mode->panel_yres)
- yres = native_mode->panel_yres;
-
- if (xres == native_mode->panel_xres)
- hscale = false;
- if (yres == native_mode->panel_yres)
- vscale = false;
- }
-
- if (radeon_encoder->flags & RADEON_USE_RMX) {
- if (radeon_encoder->rmx_type != RMX_CENTER) {
- if (!hscale)
- fp_horz_stretch |= ((xres/8-1) << 16);
- else {
- inc = (fp_horz_stretch & RADEON_HORZ_AUTO_RATIO_INC) ? 1 : 0;
- scale = ((xres + inc) * RADEON_HORZ_STRETCH_RATIO_MAX)
- / native_mode->panel_xres + 1;
- fp_horz_stretch |= (((scale) & RADEON_HORZ_STRETCH_RATIO_MASK) |
- RADEON_HORZ_STRETCH_BLEND |
- RADEON_HORZ_STRETCH_ENABLE |
- ((native_mode->panel_xres/8-1) << 16));
- }
-
- if (!vscale)
- fp_vert_stretch |= ((yres-1) << 12);
- else {
- inc = (fp_vert_stretch & RADEON_VERT_AUTO_RATIO_INC) ? 1 : 0;
- scale = ((yres + inc) * RADEON_VERT_STRETCH_RATIO_MAX)
- / native_mode->panel_yres + 1;
- fp_vert_stretch |= (((scale) & RADEON_VERT_STRETCH_RATIO_MASK) |
- RADEON_VERT_STRETCH_ENABLE |
- RADEON_VERT_STRETCH_BLEND |
- ((native_mode->panel_yres-1) << 12));
- }
- } else if (radeon_encoder->rmx_type == RMX_CENTER) {
- int blank_width;
-
- fp_horz_stretch |= ((xres/8-1) << 16);
- fp_vert_stretch |= ((yres-1) << 12);
-
- crtc_more_cntl |= (RADEON_CRTC_AUTO_HORZ_CENTER_EN |
- RADEON_CRTC_AUTO_VERT_CENTER_EN);
-
- blank_width = (mode->crtc_hblank_end - mode->crtc_hblank_start) / 8;
- if (blank_width > 110)
- blank_width = 110;
-
- fp_crtc_h_total_disp = (((blank_width) & 0x3ff)
- | ((((mode->crtc_hdisplay / 8) - 1) & 0x1ff) << 16));
-
- hsync_wid = (mode->crtc_hsync_end - mode->crtc_hsync_start) / 8;
- if (!hsync_wid)
- hsync_wid = 1;
-
- fp_h_sync_strt_wid = ((((mode->crtc_hsync_start - mode->crtc_hblank_start) / 8) & 0x1fff)
- | ((hsync_wid & 0x3f) << 16)
- | ((mode->flags & DRM_MODE_FLAG_NHSYNC)
- ? RADEON_CRTC_H_SYNC_POL
- : 0));
-
- fp_crtc_v_total_disp = (((mode->crtc_vblank_end - mode->crtc_vblank_start) & 0xffff)
- | ((mode->crtc_vdisplay - 1) << 16));
-
- vsync_wid = mode->crtc_vsync_end - mode->crtc_vsync_start;
- if (!vsync_wid)
- vsync_wid = 1;
-
- fp_v_sync_strt_wid = ((((mode->crtc_vsync_start - mode->crtc_vblank_start) & 0xfff)
- | ((vsync_wid & 0x1f) << 16)
- | ((mode->flags & DRM_MODE_FLAG_NVSYNC)
- ? RADEON_CRTC_V_SYNC_POL
- : 0)));
-
- fp_horz_vert_active = (((native_mode->panel_yres) & 0xfff) |
- (((native_mode->panel_xres / 8) & 0x1ff) << 16));
- }
- } else {
- fp_horz_stretch |= ((xres/8-1) << 16);
- fp_vert_stretch |= ((yres-1) << 12);
- }
-
- WREG32(RADEON_FP_HORZ_STRETCH, fp_horz_stretch);
- WREG32(RADEON_FP_VERT_STRETCH, fp_vert_stretch);
- WREG32(RADEON_CRTC_MORE_CNTL, crtc_more_cntl);
- WREG32(RADEON_FP_HORZ_VERT_ACTIVE, fp_horz_vert_active);
- WREG32(RADEON_FP_H_SYNC_STRT_WID, fp_h_sync_strt_wid);
- WREG32(RADEON_FP_V_SYNC_STRT_WID, fp_v_sync_strt_wid);
- WREG32(RADEON_FP_CRTC_H_TOTAL_DISP, fp_crtc_h_total_disp);
- WREG32(RADEON_FP_CRTC_V_TOTAL_DISP, fp_crtc_v_total_disp);
-
-}
-
static void radeon_legacy_lvds_dpms(struct drm_encoder *encoder, int mode)
{
struct drm_device *dev = encoder->dev;
DRM_DEBUG("\n");
- if (radeon_crtc->crtc_id == 0)
- radeon_legacy_rmx_mode_set(encoder, mode, adjusted_mode);
-
lvds_pll_cntl = RREG32(RADEON_LVDS_PLL_CNTL);
lvds_pll_cntl &= ~RADEON_LVDS_PLL_EN;
if (radeon_crtc->crtc_id == 0) {
if (ASIC_IS_R300(rdev)) {
- if (radeon_encoder->flags & RADEON_USE_RMX)
+ if (radeon_encoder->rmx_type != RMX_OFF)
lvds_pll_cntl |= R300_LVDS_SRC_SEL_RMX;
} else
lvds_gen_cntl &= ~RADEON_LVDS_SEL_CRTC2;
drm_mode_set_crtcinfo(adjusted_mode, 0);
- radeon_encoder->flags &= ~RADEON_USE_RMX;
-
if (radeon_encoder->rmx_type != RMX_OFF)
radeon_rmx_mode_fixup(encoder, mode, adjusted_mode);
DRM_DEBUG("\n");
- if (radeon_crtc->crtc_id == 0)
- radeon_legacy_rmx_mode_set(encoder, mode, adjusted_mode);
-
if (radeon_crtc->crtc_id == 0) {
if (rdev->family == CHIP_R200 || ASIC_IS_R300(rdev)) {
disp_output_cntl = RREG32(RADEON_DISP_OUTPUT_CNTL) &
DRM_DEBUG("\n");
- if (radeon_crtc->crtc_id == 0)
- radeon_legacy_rmx_mode_set(encoder, mode, adjusted_mode);
-
tmp = tmds_pll_cntl = RREG32(RADEON_TMDS_PLL_CNTL);
tmp &= 0xfffff;
if (rdev->family == CHIP_RV280) {
if (radeon_crtc->crtc_id == 0) {
if (ASIC_IS_R300(rdev) || rdev->family == CHIP_R200) {
fp_gen_cntl &= ~R200_FP_SOURCE_SEL_MASK;
- if (radeon_encoder->flags & RADEON_USE_RMX)
+ if (radeon_encoder->rmx_type != RMX_OFF)
fp_gen_cntl |= R200_FP_SOURCE_SEL_RMX;
else
fp_gen_cntl |= R200_FP_SOURCE_SEL_CRTC1;
DRM_DEBUG("\n");
- if (radeon_crtc->crtc_id == 0)
- radeon_legacy_rmx_mode_set(encoder, mode, adjusted_mode);
-
if (rdev->is_atom_bios) {
radeon_encoder->pixel_clock = adjusted_mode->clock;
atombios_external_tmds_setup(encoder, ATOM_ENABLE);
if (radeon_crtc->crtc_id == 0) {
if ((rdev->family == CHIP_R200) || ASIC_IS_R300(rdev)) {
fp2_gen_cntl &= ~R200_FP2_SOURCE_SEL_MASK;
- if (radeon_encoder->flags & RADEON_USE_RMX)
+ if (radeon_encoder->rmx_type != RMX_OFF)
fp2_gen_cntl |= R200_FP2_SOURCE_SEL_RMX;
else
fp2_gen_cntl |= R200_FP2_SOURCE_SEL_CRTC1;
DRM_DEBUG("\n");
- if (radeon_crtc->crtc_id == 0)
- radeon_legacy_rmx_mode_set(encoder, mode, adjusted_mode);
-
if (rdev->family != CHIP_R200) {
tv_dac_cntl = RREG32(RADEON_TV_DAC_CNTL);
if (rdev->family == CHIP_R420 ||
radeon_encoder->encoder_id = encoder_id;
radeon_encoder->devices = supported_device;
+ radeon_encoder->rmx_type = RMX_OFF;
switch (radeon_encoder->encoder_id) {
case ENCODER_OBJECT_ID_INTERNAL_LVDS:
+ encoder->possible_crtcs = 0x1;
drm_encoder_init(dev, encoder, &radeon_legacy_lvds_enc_funcs, DRM_MODE_ENCODER_LVDS);
drm_encoder_helper_add(encoder, &radeon_legacy_lvds_helper_funcs);
if (rdev->is_atom_bios)
#include <linux/i2c.h>
#include <linux/i2c-id.h>
#include <linux/i2c-algo-bit.h>
+#include "radeon_fixed.h"
+
+struct radeon_device;
#define to_radeon_crtc(x) container_of(x, struct radeon_crtc, base)
#define to_radeon_connector(x) container_of(x, struct radeon_connector, base)
#define RADEON_PLL_PREFER_LOW_POST_DIV (1 << 8)
#define RADEON_PLL_PREFER_HIGH_POST_DIV (1 << 9)
#define RADEON_PLL_USE_FRAC_FB_DIV (1 << 10)
+#define RADEON_PLL_PREFER_CLOSEST_LOWER (1 << 11)
struct radeon_pll {
uint16_t reference_freq;
struct atom_context *atom_context;
enum radeon_connector_table connector_table;
bool mode_config_initialized;
+ struct radeon_crtc *crtcs[2];
+};
+
+struct radeon_native_mode {
+ /* preferred mode */
+ uint32_t panel_xres, panel_yres;
+ uint32_t hoverplus, hsync_width;
+ uint32_t hblank;
+ uint32_t voverplus, vsync_width;
+ uint32_t vblank;
+ uint32_t dotclock;
+ uint32_t flags;
};
struct radeon_crtc {
uint64_t cursor_addr;
int cursor_width;
int cursor_height;
-};
-
-#define RADEON_USE_RMX 1
-
-struct radeon_native_mode {
- /* preferred mode */
- uint32_t panel_xres, panel_yres;
- uint32_t hoverplus, hsync_width;
- uint32_t hblank;
- uint32_t voverplus, vsync_width;
- uint32_t vblank;
- uint32_t dotclock;
- uint32_t flags;
+ uint32_t legacy_display_base_addr;
+ uint32_t legacy_cursor_offset;
+ enum radeon_rmx_type rmx_type;
+ uint32_t devices;
+ fixed20_12 vsc;
+ fixed20_12 hsc;
+ struct radeon_native_mode native_mode;
};
struct radeon_encoder_primary_dac {
void radeon_copy_fb(struct drm_device *dev, struct drm_gem_object *dst_obj);
void radeon_combios_asic_init(struct drm_device *dev);
extern int radeon_static_clocks_init(struct drm_device *dev);
-void radeon_init_disp_bw_legacy(struct drm_device *dev,
- struct drm_display_mode *mode1,
- uint32_t pixel_bytes1,
- struct drm_display_mode *mode2,
- uint32_t pixel_bytes2);
-void radeon_init_disp_bw_avivo(struct drm_device *dev,
- struct drm_display_mode *mode1,
- uint32_t pixel_bytes1,
- struct drm_display_mode *mode2,
- uint32_t pixel_bytes2);
-void radeon_init_disp_bandwidth(struct drm_device *dev);
+bool radeon_crtc_scaling_mode_fixup(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode);
+void atom_rv515_force_tv_scaler(struct radeon_device *rdev);
#endif
uint64_t gpu_addr;
void *kptr;
bool is_iomem;
+ uint32_t tiling_flags;
+ uint32_t pitch;
+ int surface_reg;
};
int radeon_ttm_init(struct radeon_device *rdev);
robj = container_of(tobj, struct radeon_object, tobj);
list_del_init(&robj->list);
+ radeon_object_clear_surface_reg(robj);
kfree(robj);
}
{
uint32_t flags = 0;
if (domain & RADEON_GEM_DOMAIN_VRAM) {
- flags |= TTM_PL_FLAG_VRAM;
+ flags |= TTM_PL_FLAG_VRAM | TTM_PL_FLAG_WC | TTM_PL_FLAG_UNCACHED;
}
if (domain & RADEON_GEM_DOMAIN_GTT) {
- flags |= TTM_PL_FLAG_TT;
+ flags |= TTM_PL_FLAG_TT | TTM_PL_MASK_CACHING;
}
if (domain & RADEON_GEM_DOMAIN_CPU) {
- flags |= TTM_PL_FLAG_SYSTEM;
+ flags |= TTM_PL_FLAG_SYSTEM | TTM_PL_MASK_CACHING;
}
if (!flags) {
- flags |= TTM_PL_FLAG_SYSTEM;
+ flags |= TTM_PL_FLAG_SYSTEM | TTM_PL_MASK_CACHING;
}
return flags;
}
}
robj->rdev = rdev;
robj->gobj = gobj;
+ robj->surface_reg = -1;
INIT_LIST_HEAD(&robj->list);
flags = radeon_object_flags_from_domain(domain);
}
spin_lock(&robj->tobj.lock);
if (robj->tobj.sync_obj) {
- r = ttm_bo_wait(&robj->tobj, true, false, false);
+ r = ttm_bo_wait(&robj->tobj, true, true, false);
+ }
+ spin_unlock(&robj->tobj.lock);
+ radeon_object_unreserve(robj);
+ return r;
+}
+
+int radeon_object_busy_domain(struct radeon_object *robj, uint32_t *cur_placement)
+{
+ int r = 0;
+
+ r = radeon_object_reserve(robj, true);
+ if (unlikely(r != 0)) {
+ DRM_ERROR("radeon: failed to reserve object for waiting.\n");
+ return r;
+ }
+ spin_lock(&robj->tobj.lock);
+ *cur_placement = robj->tobj.mem.mem_type;
+ if (robj->tobj.sync_obj) {
+ r = ttm_bo_wait(&robj->tobj, true, true, true);
}
spin_unlock(&robj->tobj.lock);
radeon_object_unreserve(robj);
struct radeon_object *robj;
struct radeon_fence *old_fence = NULL;
struct list_head *i;
- uint32_t flags;
int r;
r = radeon_object_list_reserve(head);
list_for_each(i, head) {
lobj = list_entry(i, struct radeon_object_list, list);
robj = lobj->robj;
- if (lobj->wdomain) {
- flags = radeon_object_flags_from_domain(lobj->wdomain);
- flags |= TTM_PL_FLAG_TT;
- } else {
- flags = radeon_object_flags_from_domain(lobj->rdomain);
- flags |= TTM_PL_FLAG_TT;
- flags |= TTM_PL_FLAG_VRAM;
- }
if (!robj->pin_count) {
- robj->tobj.proposed_placement = flags | TTM_PL_MASK_CACHING;
+ if (lobj->wdomain) {
+ robj->tobj.proposed_placement =
+ radeon_object_flags_from_domain(lobj->wdomain);
+ } else {
+ robj->tobj.proposed_placement =
+ radeon_object_flags_from_domain(lobj->rdomain);
+ }
r = ttm_buffer_object_validate(&robj->tobj,
robj->tobj.proposed_placement,
true, false);
if (unlikely(r)) {
- radeon_object_list_unreserve(head);
DRM_ERROR("radeon: failed to validate.\n");
return r;
}
radeon_object_gpu_addr(robj);
}
lobj->gpu_offset = robj->gpu_addr;
+ lobj->tiling_flags = robj->tiling_flags;
if (fence) {
old_fence = (struct radeon_fence *)robj->tobj.sync_obj;
robj->tobj.sync_obj = radeon_fence_ref(fence);
{
return robj->tobj.num_pages << PAGE_SHIFT;
}
+
+int radeon_object_get_surface_reg(struct radeon_object *robj)
+{
+ struct radeon_device *rdev = robj->rdev;
+ struct radeon_surface_reg *reg;
+ struct radeon_object *old_object;
+ int steal;
+ int i;
+
+ if (!robj->tiling_flags)
+ return 0;
+
+ if (robj->surface_reg >= 0) {
+ reg = &rdev->surface_regs[robj->surface_reg];
+ i = robj->surface_reg;
+ goto out;
+ }
+
+ steal = -1;
+ for (i = 0; i < RADEON_GEM_MAX_SURFACES; i++) {
+
+ reg = &rdev->surface_regs[i];
+ if (!reg->robj)
+ break;
+
+ old_object = reg->robj;
+ if (old_object->pin_count == 0)
+ steal = i;
+ }
+
+ /* if we are all out */
+ if (i == RADEON_GEM_MAX_SURFACES) {
+ if (steal == -1)
+ return -ENOMEM;
+ /* find someone with a surface reg and nuke their BO */
+ reg = &rdev->surface_regs[steal];
+ old_object = reg->robj;
+ /* blow away the mapping */
+ DRM_DEBUG("stealing surface reg %d from %p\n", steal, old_object);
+ ttm_bo_unmap_virtual(&old_object->tobj);
+ old_object->surface_reg = -1;
+ i = steal;
+ }
+
+ robj->surface_reg = i;
+ reg->robj = robj;
+
+out:
+ radeon_set_surface_reg(rdev, i, robj->tiling_flags, robj->pitch,
+ robj->tobj.mem.mm_node->start << PAGE_SHIFT,
+ robj->tobj.num_pages << PAGE_SHIFT);
+ return 0;
+}
+
+void radeon_object_clear_surface_reg(struct radeon_object *robj)
+{
+ struct radeon_device *rdev = robj->rdev;
+ struct radeon_surface_reg *reg;
+
+ if (robj->surface_reg == -1)
+ return;
+
+ reg = &rdev->surface_regs[robj->surface_reg];
+ radeon_clear_surface_reg(rdev, robj->surface_reg);
+
+ reg->robj = NULL;
+ robj->surface_reg = -1;
+}
+
+void radeon_object_set_tiling_flags(struct radeon_object *robj,
+ uint32_t tiling_flags, uint32_t pitch)
+{
+ robj->tiling_flags = tiling_flags;
+ robj->pitch = pitch;
+}
+
+void radeon_object_get_tiling_flags(struct radeon_object *robj,
+ uint32_t *tiling_flags,
+ uint32_t *pitch)
+{
+ if (tiling_flags)
+ *tiling_flags = robj->tiling_flags;
+ if (pitch)
+ *pitch = robj->pitch;
+}
+
+int radeon_object_check_tiling(struct radeon_object *robj, bool has_moved,
+ bool force_drop)
+{
+ if (!(robj->tiling_flags & RADEON_TILING_SURFACE))
+ return 0;
+
+ if (force_drop) {
+ radeon_object_clear_surface_reg(robj);
+ return 0;
+ }
+
+ if (robj->tobj.mem.mem_type != TTM_PL_VRAM) {
+ if (!has_moved)
+ return 0;
+
+ if (robj->surface_reg >= 0)
+ radeon_object_clear_surface_reg(robj);
+ return 0;
+ }
+
+ if ((robj->surface_reg >= 0) && !has_moved)
+ return 0;
+
+ return radeon_object_get_surface_reg(robj);
+}
+
+void radeon_bo_move_notify(struct ttm_buffer_object *bo,
+ struct ttm_mem_reg *mem)
+{
+ struct radeon_object *robj = container_of(bo, struct radeon_object, tobj);
+ radeon_object_check_tiling(robj, 0, 1);
+}
+
+void radeon_bo_fault_reserve_notify(struct ttm_buffer_object *bo)
+{
+ struct radeon_object *robj = container_of(bo, struct radeon_object, tobj);
+ radeon_object_check_tiling(robj, 0, 0);
+}
# define RS400_TMDS2_PLLRST (1 << 1)
#define RADEON_GEN_INT_CNTL 0x0040
+# define RADEON_CRTC_VBLANK_MASK (1 << 0)
+# define RADEON_CRTC2_VBLANK_MASK (1 << 9)
# define RADEON_SW_INT_ENABLE (1 << 25)
#define RADEON_GEN_INT_STATUS 0x0044
-# define RADEON_VSYNC_INT_AK (1 << 2)
-# define RADEON_VSYNC_INT (1 << 2)
-# define RADEON_VSYNC2_INT_AK (1 << 6)
-# define RADEON_VSYNC2_INT (1 << 6)
+# define AVIVO_DISPLAY_INT_STATUS (1 << 0)
+# define RADEON_CRTC_VBLANK_STAT (1 << 0)
+# define RADEON_CRTC_VBLANK_STAT_ACK (1 << 0)
+# define RADEON_CRTC2_VBLANK_STAT (1 << 9)
+# define RADEON_CRTC2_VBLANK_STAT_ACK (1 << 9)
# define RADEON_SW_INT_FIRE (1 << 26)
# define RADEON_SW_INT_TEST (1 << 25)
# define RADEON_SW_INT_TEST_ACK (1 << 25)
# define RADEON_RE_WIDTH_SHIFT 0
# define RADEON_RE_HEIGHT_SHIFT 16
+#define RADEON_RB3D_ZPASS_DATA 0x3290
+#define RADEON_RB3D_ZPASS_ADDR 0x3294
+
#define RADEON_SE_CNTL 0x1c4c
# define RADEON_FFACE_CULL_CW (0 << 0)
# define RADEON_FFACE_CULL_CCW (1 << 0)
#define RADEON_SCRATCH_REG4 0x15f0
#define RADEON_SCRATCH_REG5 0x15f4
+#define RV530_GB_PIPE_SELECT2 0x4124
+
#endif
}
}
-static void radeon_ib_cpu_flush(struct radeon_device *rdev,
- struct radeon_ib *ib)
-{
- unsigned long tmp;
- unsigned i;
-
- /* To force CPU cache flush ugly but seems reliable */
- for (i = 0; i < ib->length_dw; i += (rdev->cp.align_mask + 1)) {
- tmp = readl(&ib->ptr[i]);
- }
-}
-
int radeon_ib_schedule(struct radeon_device *rdev, struct radeon_ib *ib)
{
int r = 0;
mutex_lock(&rdev->ib_pool.mutex);
radeon_ib_align(rdev, ib);
- radeon_ib_cpu_flush(rdev, ib);
if (!ib->length_dw || !rdev->cp.ready) {
/* TODO: Nothings in the ib we should report. */
mutex_unlock(&rdev->ib_pool.mutex);
DRM_ERROR("radeon: couldn't schedule IB(%lu).\n", ib->idx);
return -EINVAL;
}
- /* 64 dwords should be enought for fence too */
+ /* 64 dwords should be enough for fence too */
r = radeon_ring_lock(rdev, 64);
if (r) {
DRM_ERROR("radeon: scheduling IB failled (%d).\n", r);
--- /dev/null
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ * Alex Deucher
+ * Jerome Glisse
+ */
+#ifndef __RADEON_SHARE_H__
+#define __RADEON_SHARE_H__
+
+void r100_vram_init_sizes(struct radeon_device *rdev);
+
+void rs690_line_buffer_adjust(struct radeon_device *rdev,
+ struct drm_display_mode *mode1,
+ struct drm_display_mode *mode2);
+
+void rv515_bandwidth_avivo_update(struct radeon_device *rdev);
+
+#endif
case RADEON_PARAM_NUM_GB_PIPES:
value = dev_priv->num_gb_pipes;
break;
+ case RADEON_PARAM_NUM_Z_PIPES:
+ value = dev_priv->num_z_pipes;
+ break;
default:
DRM_DEBUG("Invalid parameter %d\n", param->param);
return -EINVAL;
--- /dev/null
+/*
+ * Copyright 2009 VMware, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Michel Dänzer
+ */
+#include <drm/drmP.h>
+#include <drm/radeon_drm.h>
+#include "radeon_reg.h"
+#include "radeon.h"
+
+
+/* Test BO GTT->VRAM and VRAM->GTT GPU copies across the whole GTT aperture */
+void radeon_test_moves(struct radeon_device *rdev)
+{
+ struct radeon_object *vram_obj = NULL;
+ struct radeon_object **gtt_obj = NULL;
+ struct radeon_fence *fence = NULL;
+ uint64_t gtt_addr, vram_addr;
+ unsigned i, n, size;
+ int r;
+
+ size = 1024 * 1024;
+
+ /* Number of tests =
+ * (Total GTT - IB pool - writeback page - ring buffer) / test size
+ */
+ n = (rdev->mc.gtt_size - RADEON_IB_POOL_SIZE*64*1024 - 4096 -
+ rdev->cp.ring_size) / size;
+
+ gtt_obj = kzalloc(n * sizeof(*gtt_obj), GFP_KERNEL);
+ if (!gtt_obj) {
+ DRM_ERROR("Failed to allocate %d pointers\n", n);
+ r = 1;
+ goto out_cleanup;
+ }
+
+ r = radeon_object_create(rdev, NULL, size, true, RADEON_GEM_DOMAIN_VRAM,
+ false, &vram_obj);
+ if (r) {
+ DRM_ERROR("Failed to create VRAM object\n");
+ goto out_cleanup;
+ }
+
+ r = radeon_object_pin(vram_obj, RADEON_GEM_DOMAIN_VRAM, &vram_addr);
+ if (r) {
+ DRM_ERROR("Failed to pin VRAM object\n");
+ goto out_cleanup;
+ }
+
+ for (i = 0; i < n; i++) {
+ void *gtt_map, *vram_map;
+ void **gtt_start, **gtt_end;
+ void **vram_start, **vram_end;
+
+ r = radeon_object_create(rdev, NULL, size, true,
+ RADEON_GEM_DOMAIN_GTT, false, gtt_obj + i);
+ if (r) {
+ DRM_ERROR("Failed to create GTT object %d\n", i);
+ goto out_cleanup;
+ }
+
+ r = radeon_object_pin(gtt_obj[i], RADEON_GEM_DOMAIN_GTT, >t_addr);
+ if (r) {
+ DRM_ERROR("Failed to pin GTT object %d\n", i);
+ goto out_cleanup;
+ }
+
+ r = radeon_object_kmap(gtt_obj[i], >t_map);
+ if (r) {
+ DRM_ERROR("Failed to map GTT object %d\n", i);
+ goto out_cleanup;
+ }
+
+ for (gtt_start = gtt_map, gtt_end = gtt_map + size;
+ gtt_start < gtt_end;
+ gtt_start++)
+ *gtt_start = gtt_start;
+
+ radeon_object_kunmap(gtt_obj[i]);
+
+ r = radeon_fence_create(rdev, &fence);
+ if (r) {
+ DRM_ERROR("Failed to create GTT->VRAM fence %d\n", i);
+ goto out_cleanup;
+ }
+
+ r = radeon_copy(rdev, gtt_addr, vram_addr, size / 4096, fence);
+ if (r) {
+ DRM_ERROR("Failed GTT->VRAM copy %d\n", i);
+ goto out_cleanup;
+ }
+
+ r = radeon_fence_wait(fence, false);
+ if (r) {
+ DRM_ERROR("Failed to wait for GTT->VRAM fence %d\n", i);
+ goto out_cleanup;
+ }
+
+ radeon_fence_unref(&fence);
+
+ r = radeon_object_kmap(vram_obj, &vram_map);
+ if (r) {
+ DRM_ERROR("Failed to map VRAM object after copy %d\n", i);
+ goto out_cleanup;
+ }
+
+ for (gtt_start = gtt_map, gtt_end = gtt_map + size,
+ vram_start = vram_map, vram_end = vram_map + size;
+ vram_start < vram_end;
+ gtt_start++, vram_start++) {
+ if (*vram_start != gtt_start) {
+ DRM_ERROR("Incorrect GTT->VRAM copy %d: Got 0x%p, "
+ "expected 0x%p (GTT map 0x%p-0x%p)\n",
+ i, *vram_start, gtt_start, gtt_map,
+ gtt_end);
+ radeon_object_kunmap(vram_obj);
+ goto out_cleanup;
+ }
+ *vram_start = vram_start;
+ }
+
+ radeon_object_kunmap(vram_obj);
+
+ r = radeon_fence_create(rdev, &fence);
+ if (r) {
+ DRM_ERROR("Failed to create VRAM->GTT fence %d\n", i);
+ goto out_cleanup;
+ }
+
+ r = radeon_copy(rdev, vram_addr, gtt_addr, size / 4096, fence);
+ if (r) {
+ DRM_ERROR("Failed VRAM->GTT copy %d\n", i);
+ goto out_cleanup;
+ }
+
+ r = radeon_fence_wait(fence, false);
+ if (r) {
+ DRM_ERROR("Failed to wait for VRAM->GTT fence %d\n", i);
+ goto out_cleanup;
+ }
+
+ radeon_fence_unref(&fence);
+
+ r = radeon_object_kmap(gtt_obj[i], >t_map);
+ if (r) {
+ DRM_ERROR("Failed to map GTT object after copy %d\n", i);
+ goto out_cleanup;
+ }
+
+ for (gtt_start = gtt_map, gtt_end = gtt_map + size,
+ vram_start = vram_map, vram_end = vram_map + size;
+ gtt_start < gtt_end;
+ gtt_start++, vram_start++) {
+ if (*gtt_start != vram_start) {
+ DRM_ERROR("Incorrect VRAM->GTT copy %d: Got 0x%p, "
+ "expected 0x%p (VRAM map 0x%p-0x%p)\n",
+ i, *gtt_start, vram_start, vram_map,
+ vram_end);
+ radeon_object_kunmap(gtt_obj[i]);
+ goto out_cleanup;
+ }
+ }
+
+ radeon_object_kunmap(gtt_obj[i]);
+
+ DRM_INFO("Tested GTT->VRAM and VRAM->GTT copy for GTT offset 0x%llx\n",
+ gtt_addr - rdev->mc.gtt_location);
+ }
+
+out_cleanup:
+ if (vram_obj) {
+ radeon_object_unpin(vram_obj);
+ radeon_object_unref(&vram_obj);
+ }
+ if (gtt_obj) {
+ for (i = 0; i < n; i++) {
+ if (gtt_obj[i]) {
+ radeon_object_unpin(gtt_obj[i]);
+ radeon_object_unref(>t_obj[i]);
+ }
+ }
+ kfree(gtt_obj);
+ }
+ if (fence) {
+ radeon_fence_unref(&fence);
+ }
+ if (r) {
+ printk(KERN_WARNING "Error while testing BO move.\n");
+ }
+}
+
if (!rdev->cp.ready) {
/* use memcpy */
DRM_ERROR("CP is not ready use memcpy.\n");
- return ttm_bo_move_memcpy(bo, evict, no_wait, new_mem);
+ goto memcpy;
}
if (old_mem->mem_type == TTM_PL_VRAM &&
new_mem->mem_type == TTM_PL_SYSTEM) {
- return radeon_move_vram_ram(bo, evict, interruptible,
+ r = radeon_move_vram_ram(bo, evict, interruptible,
no_wait, new_mem);
} else if (old_mem->mem_type == TTM_PL_SYSTEM &&
new_mem->mem_type == TTM_PL_VRAM) {
- return radeon_move_ram_vram(bo, evict, interruptible,
+ r = radeon_move_ram_vram(bo, evict, interruptible,
no_wait, new_mem);
} else {
r = radeon_move_blit(bo, evict, no_wait, new_mem, old_mem);
- if (unlikely(r)) {
- return r;
- }
}
+
+ if (r) {
+memcpy:
+ r = ttm_bo_move_memcpy(bo, evict, no_wait, new_mem);
+ }
+
return r;
}
.sync_obj_flush = &radeon_sync_obj_flush,
.sync_obj_unref = &radeon_sync_obj_unref,
.sync_obj_ref = &radeon_sync_obj_ref,
+ .move_notify = &radeon_bo_move_notify,
+ .fault_reserve_notify = &radeon_bo_fault_reserve_notify,
};
int radeon_ttm_init(struct radeon_device *rdev)
/* No others user of address space so set it to 0 */
r = ttm_bo_device_init(&rdev->mman.bdev,
rdev->mman.mem_global_ref.object,
- &radeon_bo_driver, DRM_FILE_PAGE_OFFSET);
+ &radeon_bo_driver, DRM_FILE_PAGE_OFFSET,
+ rdev->need_dma32);
if (r) {
DRM_ERROR("failed initializing buffer object driver(%d).\n", r);
return r;
}
r = ttm_bo_init_mm(&rdev->mman.bdev, TTM_PL_VRAM, 0,
- ((rdev->mc.aper_size) >> PAGE_SHIFT));
+ ((rdev->mc.real_vram_size) >> PAGE_SHIFT));
if (r) {
DRM_ERROR("Failed initializing VRAM heap.\n");
return r;
return r;
}
DRM_INFO("radeon: %uM of VRAM memory ready\n",
- rdev->mc.vram_size / (1024 * 1024));
+ rdev->mc.real_vram_size / (1024 * 1024));
r = ttm_bo_init_mm(&rdev->mman.bdev, TTM_PL_TT, 0,
((rdev->mc.gtt_size) >> PAGE_SHIFT));
if (r) {
#include <drm/drmP.h>
#include "radeon_reg.h"
#include "radeon.h"
+#include "radeon_share.h"
/* rs400,rs480 depends on : */
void r100_hdp_reset(struct radeon_device *rdev);
WREG32(RADEON_BUS_CNTL, tmp);
}
/* Table should be in 32bits address space so ignore bits above. */
- tmp = rdev->gart.table_addr & 0xfffff000;
+ tmp = (u32)rdev->gart.table_addr & 0xfffff000;
+ tmp |= (upper_32_bits(rdev->gart.table_addr) & 0xff) << 4;
+
WREG32_MC(RS480_GART_BASE, tmp);
/* TODO: more tweaking here */
WREG32_MC(RS480_GART_FEATURE_ID,
int rs400_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr)
{
+ uint32_t entry;
+
if (i < 0 || i > rdev->gart.num_gpu_pages) {
return -EINVAL;
}
- rdev->gart.table.ram.ptr[i] = cpu_to_le32(((uint32_t)addr) | 0xC);
+
+ entry = (lower_32_bits(addr) & PAGE_MASK) |
+ ((upper_32_bits(addr) & 0xff) << 4) |
+ 0xc;
+ entry = cpu_to_le32(entry);
+ rdev->gart.table.ram.ptr[i] = entry;
return 0;
}
rs400_gpu_init(rdev);
rs400_gart_disable(rdev);
- rdev->mc.gtt_location = rdev->mc.vram_size;
+ rdev->mc.gtt_location = rdev->mc.mc_vram_size;
rdev->mc.gtt_location += (rdev->mc.gtt_size - 1);
rdev->mc.gtt_location &= ~(rdev->mc.gtt_size - 1);
- rdev->mc.vram_location = 0xFFFFFFFFUL;
r = radeon_mc_setup(rdev);
if (r) {
return r;
"programming pipes. Bad things might happen.\n");
}
- tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+ tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
tmp = REG_SET(RADEON_MC_FB_TOP, tmp >> 16);
tmp |= REG_SET(RADEON_MC_FB_START, rdev->mc.vram_location >> 16);
WREG32(RADEON_MC_FB_LOCATION, tmp);
*/
void rs400_vram_info(struct radeon_device *rdev)
{
- uint32_t tom;
-
rs400_gart_adjust_size(rdev);
/* DDR for all card after R300 & IGP */
rdev->mc.vram_is_ddr = true;
rdev->mc.vram_width = 128;
- /* read NB_TOM to get the amount of ram stolen for the GPU */
- tom = RREG32(RADEON_NB_TOM);
- rdev->mc.vram_size = (((tom >> 16) - (tom & 0xffff) + 1) << 16);
- WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size);
-
- /* Could aper size report 0 ? */
- rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
- rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+ r100_vram_init_sizes(rdev);
}
printk(KERN_WARNING "Failed to wait MC idle while "
"programming pipes. Bad things might happen.\n");
}
- tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+ tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
tmp = REG_SET(RS600_MC_FB_TOP, tmp >> 16);
tmp |= REG_SET(RS600_MC_FB_START, rdev->mc.vram_location >> 16);
WREG32_MC(RS600_MC_FB_LOCATION, tmp);
}
+/*
+ * Interrupts
+ */
+int rs600_irq_set(struct radeon_device *rdev)
+{
+ uint32_t tmp = 0;
+ uint32_t mode_int = 0;
+
+ if (rdev->irq.sw_int) {
+ tmp |= RADEON_SW_INT_ENABLE;
+ }
+ if (rdev->irq.crtc_vblank_int[0]) {
+ tmp |= AVIVO_DISPLAY_INT_STATUS;
+ mode_int |= AVIVO_D1MODE_INT_MASK;
+ }
+ if (rdev->irq.crtc_vblank_int[1]) {
+ tmp |= AVIVO_DISPLAY_INT_STATUS;
+ mode_int |= AVIVO_D2MODE_INT_MASK;
+ }
+ WREG32(RADEON_GEN_INT_CNTL, tmp);
+ WREG32(AVIVO_DxMODE_INT_MASK, mode_int);
+ return 0;
+}
+
+static inline uint32_t rs600_irq_ack(struct radeon_device *rdev, u32 *r500_disp_int)
+{
+ uint32_t irqs = RREG32(RADEON_GEN_INT_STATUS);
+ uint32_t irq_mask = RADEON_SW_INT_TEST;
+
+ if (irqs & AVIVO_DISPLAY_INT_STATUS) {
+ *r500_disp_int = RREG32(AVIVO_DISP_INTERRUPT_STATUS);
+ if (*r500_disp_int & AVIVO_D1_VBLANK_INTERRUPT) {
+ WREG32(AVIVO_D1MODE_VBLANK_STATUS, AVIVO_VBLANK_ACK);
+ }
+ if (*r500_disp_int & AVIVO_D2_VBLANK_INTERRUPT) {
+ WREG32(AVIVO_D2MODE_VBLANK_STATUS, AVIVO_VBLANK_ACK);
+ }
+ } else {
+ *r500_disp_int = 0;
+ }
+
+ if (irqs) {
+ WREG32(RADEON_GEN_INT_STATUS, irqs);
+ }
+ return irqs & irq_mask;
+}
+
+int rs600_irq_process(struct radeon_device *rdev)
+{
+ uint32_t status;
+ uint32_t r500_disp_int;
+
+ status = rs600_irq_ack(rdev, &r500_disp_int);
+ if (!status && !r500_disp_int) {
+ return IRQ_NONE;
+ }
+ while (status || r500_disp_int) {
+ /* SW interrupt */
+ if (status & RADEON_SW_INT_TEST) {
+ radeon_fence_process(rdev);
+ }
+ /* Vertical blank interrupts */
+ if (r500_disp_int & AVIVO_D1_VBLANK_INTERRUPT) {
+ drm_handle_vblank(rdev->ddev, 0);
+ }
+ if (r500_disp_int & AVIVO_D2_VBLANK_INTERRUPT) {
+ drm_handle_vblank(rdev->ddev, 1);
+ }
+ status = rs600_irq_ack(rdev, &r500_disp_int);
+ }
+ return IRQ_HANDLED;
+}
+
+u32 rs600_get_vblank_counter(struct radeon_device *rdev, int crtc)
+{
+ if (crtc == 0)
+ return RREG32(AVIVO_D1CRTC_FRAME_COUNT);
+ else
+ return RREG32(AVIVO_D2CRTC_FRAME_COUNT);
+}
+
+
/*
* Global GPU functions
*/
rdev->mc.vram_width = 128;
}
+void rs600_bandwidth_update(struct radeon_device *rdev)
+{
+ /* FIXME: implement, should this be like rs690 ? */
+}
+
/*
* Indirect registers accessor
((reg) & RS600_MC_ADDR_MASK));
WREG32(RS600_MC_DATA, v);
}
+
+static const unsigned rs600_reg_safe_bm[219] = {
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0x17FF1FFF, 0xFFFFFFFC, 0xFFFFFFFF, 0xFF30FFBF,
+ 0xFFFFFFF8, 0xC3E6FFFF, 0xFFFFF6DF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFF03F,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFEFCE, 0xF00EBFFF, 0x007C0000,
+ 0xF0000078, 0xFF000009, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFF7FF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFC78, 0xFFFFFFFF, 0xFFFFFFFE, 0xFFFFFFFF,
+ 0x38FF8F50, 0xFFF88082, 0xF000000C, 0xFAE009FF,
+ 0x0000FFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000,
+ 0x00000000, 0x0000C100, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0xFFFF0000, 0xFFFFFFFF, 0xFF80FFFF,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x0003FC01, 0xFFFFFCF8, 0xFF800B19, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+};
+
+int rs600_init(struct radeon_device *rdev)
+{
+ rdev->config.r300.reg_safe_bm = rs600_reg_safe_bm;
+ rdev->config.r300.reg_safe_bm_size = ARRAY_SIZE(rs600_reg_safe_bm);
+ return 0;
+}
#include "drmP.h"
#include "radeon_reg.h"
#include "radeon.h"
+#include "rs690r.h"
+#include "atom.h"
+#include "atom-bits.h"
/* rs690,rs740 depends on : */
void r100_hdp_reset(struct radeon_device *rdev);
rs400_gart_disable(rdev);
/* Setup GPU memory space */
- rdev->mc.gtt_location = rdev->mc.vram_size;
+ rdev->mc.gtt_location = rdev->mc.mc_vram_size;
rdev->mc.gtt_location += (rdev->mc.gtt_size - 1);
rdev->mc.gtt_location &= ~(rdev->mc.gtt_size - 1);
rdev->mc.vram_location = 0xFFFFFFFFUL;
printk(KERN_WARNING "Failed to wait MC idle while "
"programming pipes. Bad things might happen.\n");
}
- tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+ tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
tmp = REG_SET(RS690_MC_FB_TOP, tmp >> 16);
tmp |= REG_SET(RS690_MC_FB_START, rdev->mc.vram_location >> 16);
WREG32_MC(RS690_MCCFG_FB_LOCATION, tmp);
/*
* VRAM info.
*/
+void rs690_pm_info(struct radeon_device *rdev)
+{
+ int index = GetIndexIntoMasterTable(DATA, IntegratedSystemInfo);
+ struct _ATOM_INTEGRATED_SYSTEM_INFO *info;
+ struct _ATOM_INTEGRATED_SYSTEM_INFO_V2 *info_v2;
+ void *ptr;
+ uint16_t data_offset;
+ uint8_t frev, crev;
+ fixed20_12 tmp;
+
+ atom_parse_data_header(rdev->mode_info.atom_context, index, NULL,
+ &frev, &crev, &data_offset);
+ ptr = rdev->mode_info.atom_context->bios + data_offset;
+ info = (struct _ATOM_INTEGRATED_SYSTEM_INFO *)ptr;
+ info_v2 = (struct _ATOM_INTEGRATED_SYSTEM_INFO_V2 *)ptr;
+ /* Get various system informations from bios */
+ switch (crev) {
+ case 1:
+ tmp.full = rfixed_const(100);
+ rdev->pm.igp_sideport_mclk.full = rfixed_const(info->ulBootUpMemoryClock);
+ rdev->pm.igp_sideport_mclk.full = rfixed_div(rdev->pm.igp_sideport_mclk, tmp);
+ rdev->pm.igp_system_mclk.full = rfixed_const(le16_to_cpu(info->usK8MemoryClock));
+ rdev->pm.igp_ht_link_clk.full = rfixed_const(le16_to_cpu(info->usFSBClock));
+ rdev->pm.igp_ht_link_width.full = rfixed_const(info->ucHTLinkWidth);
+ break;
+ case 2:
+ tmp.full = rfixed_const(100);
+ rdev->pm.igp_sideport_mclk.full = rfixed_const(info_v2->ulBootUpSidePortClock);
+ rdev->pm.igp_sideport_mclk.full = rfixed_div(rdev->pm.igp_sideport_mclk, tmp);
+ rdev->pm.igp_system_mclk.full = rfixed_const(info_v2->ulBootUpUMAClock);
+ rdev->pm.igp_system_mclk.full = rfixed_div(rdev->pm.igp_system_mclk, tmp);
+ rdev->pm.igp_ht_link_clk.full = rfixed_const(info_v2->ulHTLinkFreq);
+ rdev->pm.igp_ht_link_clk.full = rfixed_div(rdev->pm.igp_ht_link_clk, tmp);
+ rdev->pm.igp_ht_link_width.full = rfixed_const(le16_to_cpu(info_v2->usMinHTLinkWidth));
+ break;
+ default:
+ tmp.full = rfixed_const(100);
+ /* We assume the slower possible clock ie worst case */
+ /* DDR 333Mhz */
+ rdev->pm.igp_sideport_mclk.full = rfixed_const(333);
+ /* FIXME: system clock ? */
+ rdev->pm.igp_system_mclk.full = rfixed_const(100);
+ rdev->pm.igp_system_mclk.full = rfixed_div(rdev->pm.igp_system_mclk, tmp);
+ rdev->pm.igp_ht_link_clk.full = rfixed_const(200);
+ rdev->pm.igp_ht_link_width.full = rfixed_const(8);
+ DRM_ERROR("No integrated system info for your GPU, using safe default\n");
+ break;
+ }
+ /* Compute various bandwidth */
+ /* k8_bandwidth = (memory_clk / 2) * 2 * 8 * 0.5 = memory_clk * 4 */
+ tmp.full = rfixed_const(4);
+ rdev->pm.k8_bandwidth.full = rfixed_mul(rdev->pm.igp_system_mclk, tmp);
+ /* ht_bandwidth = ht_clk * 2 * ht_width / 8 * 0.8
+ * = ht_clk * ht_width / 5
+ */
+ tmp.full = rfixed_const(5);
+ rdev->pm.ht_bandwidth.full = rfixed_mul(rdev->pm.igp_ht_link_clk,
+ rdev->pm.igp_ht_link_width);
+ rdev->pm.ht_bandwidth.full = rfixed_div(rdev->pm.ht_bandwidth, tmp);
+ if (tmp.full < rdev->pm.max_bandwidth.full) {
+ /* HT link is a limiting factor */
+ rdev->pm.max_bandwidth.full = tmp.full;
+ }
+ /* sideport_bandwidth = (sideport_clk / 2) * 2 * 2 * 0.7
+ * = (sideport_clk * 14) / 10
+ */
+ tmp.full = rfixed_const(14);
+ rdev->pm.sideport_bandwidth.full = rfixed_mul(rdev->pm.igp_sideport_mclk, tmp);
+ tmp.full = rfixed_const(10);
+ rdev->pm.sideport_bandwidth.full = rfixed_div(rdev->pm.sideport_bandwidth, tmp);
+}
+
void rs690_vram_info(struct radeon_device *rdev)
{
uint32_t tmp;
+ fixed20_12 a;
rs400_gart_adjust_size(rdev);
/* DDR for all card after R300 & IGP */
} else {
rdev->mc.vram_width = 64;
}
- rdev->mc.vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
+ rdev->mc.real_vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
+ rdev->mc.mc_vram_size = rdev->mc.real_vram_size;
rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+ rs690_pm_info(rdev);
+ /* FIXME: we should enforce default clock in case GPU is not in
+ * default setup
+ */
+ a.full = rfixed_const(100);
+ rdev->pm.sclk.full = rfixed_const(rdev->clock.default_sclk);
+ rdev->pm.sclk.full = rfixed_div(rdev->pm.sclk, a);
+ a.full = rfixed_const(16);
+ /* core_bandwidth = sclk(Mhz) * 16 */
+ rdev->pm.core_bandwidth.full = rfixed_div(rdev->pm.sclk, a);
+}
+
+void rs690_line_buffer_adjust(struct radeon_device *rdev,
+ struct drm_display_mode *mode1,
+ struct drm_display_mode *mode2)
+{
+ u32 tmp;
+
+ /*
+ * Line Buffer Setup
+ * There is a single line buffer shared by both display controllers.
+ * DC_LB_MEMORY_SPLIT controls how that line buffer is shared between
+ * the display controllers. The paritioning can either be done
+ * manually or via one of four preset allocations specified in bits 1:0:
+ * 0 - line buffer is divided in half and shared between crtc
+ * 1 - D1 gets 3/4 of the line buffer, D2 gets 1/4
+ * 2 - D1 gets the whole buffer
+ * 3 - D1 gets 1/4 of the line buffer, D2 gets 3/4
+ * Setting bit 2 of DC_LB_MEMORY_SPLIT controls switches to manual
+ * allocation mode. In manual allocation mode, D1 always starts at 0,
+ * D1 end/2 is specified in bits 14:4; D2 allocation follows D1.
+ */
+ tmp = RREG32(DC_LB_MEMORY_SPLIT) & ~DC_LB_MEMORY_SPLIT_MASK;
+ tmp &= ~DC_LB_MEMORY_SPLIT_SHIFT_MODE;
+ /* auto */
+ if (mode1 && mode2) {
+ if (mode1->hdisplay > mode2->hdisplay) {
+ if (mode1->hdisplay > 2560)
+ tmp |= DC_LB_MEMORY_SPLIT_D1_3Q_D2_1Q;
+ else
+ tmp |= DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
+ } else if (mode2->hdisplay > mode1->hdisplay) {
+ if (mode2->hdisplay > 2560)
+ tmp |= DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q;
+ else
+ tmp |= DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
+ } else
+ tmp |= AVIVO_DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
+ } else if (mode1) {
+ tmp |= DC_LB_MEMORY_SPLIT_D1_ONLY;
+ } else if (mode2) {
+ tmp |= DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q;
+ }
+ WREG32(DC_LB_MEMORY_SPLIT, tmp);
+}
+
+struct rs690_watermark {
+ u32 lb_request_fifo_depth;
+ fixed20_12 num_line_pair;
+ fixed20_12 estimated_width;
+ fixed20_12 worst_case_latency;
+ fixed20_12 consumption_rate;
+ fixed20_12 active_time;
+ fixed20_12 dbpp;
+ fixed20_12 priority_mark_max;
+ fixed20_12 priority_mark;
+ fixed20_12 sclk;
+};
+
+void rs690_crtc_bandwidth_compute(struct radeon_device *rdev,
+ struct radeon_crtc *crtc,
+ struct rs690_watermark *wm)
+{
+ struct drm_display_mode *mode = &crtc->base.mode;
+ fixed20_12 a, b, c;
+ fixed20_12 pclk, request_fifo_depth, tolerable_latency, estimated_width;
+ fixed20_12 consumption_time, line_time, chunk_time, read_delay_latency;
+ /* FIXME: detect IGP with sideport memory, i don't think there is any
+ * such product available
+ */
+ bool sideport = false;
+
+ if (!crtc->base.enabled) {
+ /* FIXME: wouldn't it better to set priority mark to maximum */
+ wm->lb_request_fifo_depth = 4;
+ return;
+ }
+
+ if (crtc->vsc.full > rfixed_const(2))
+ wm->num_line_pair.full = rfixed_const(2);
+ else
+ wm->num_line_pair.full = rfixed_const(1);
+
+ b.full = rfixed_const(mode->crtc_hdisplay);
+ c.full = rfixed_const(256);
+ a.full = rfixed_mul(wm->num_line_pair, b);
+ request_fifo_depth.full = rfixed_div(a, c);
+ if (a.full < rfixed_const(4)) {
+ wm->lb_request_fifo_depth = 4;
+ } else {
+ wm->lb_request_fifo_depth = rfixed_trunc(request_fifo_depth);
+ }
+
+ /* Determine consumption rate
+ * pclk = pixel clock period(ns) = 1000 / (mode.clock / 1000)
+ * vtaps = number of vertical taps,
+ * vsc = vertical scaling ratio, defined as source/destination
+ * hsc = horizontal scaling ration, defined as source/destination
+ */
+ a.full = rfixed_const(mode->clock);
+ b.full = rfixed_const(1000);
+ a.full = rfixed_div(a, b);
+ pclk.full = rfixed_div(b, a);
+ if (crtc->rmx_type != RMX_OFF) {
+ b.full = rfixed_const(2);
+ if (crtc->vsc.full > b.full)
+ b.full = crtc->vsc.full;
+ b.full = rfixed_mul(b, crtc->hsc);
+ c.full = rfixed_const(2);
+ b.full = rfixed_div(b, c);
+ consumption_time.full = rfixed_div(pclk, b);
+ } else {
+ consumption_time.full = pclk.full;
+ }
+ a.full = rfixed_const(1);
+ wm->consumption_rate.full = rfixed_div(a, consumption_time);
+
+
+ /* Determine line time
+ * LineTime = total time for one line of displayhtotal
+ * LineTime = total number of horizontal pixels
+ * pclk = pixel clock period(ns)
+ */
+ a.full = rfixed_const(crtc->base.mode.crtc_htotal);
+ line_time.full = rfixed_mul(a, pclk);
+
+ /* Determine active time
+ * ActiveTime = time of active region of display within one line,
+ * hactive = total number of horizontal active pixels
+ * htotal = total number of horizontal pixels
+ */
+ a.full = rfixed_const(crtc->base.mode.crtc_htotal);
+ b.full = rfixed_const(crtc->base.mode.crtc_hdisplay);
+ wm->active_time.full = rfixed_mul(line_time, b);
+ wm->active_time.full = rfixed_div(wm->active_time, a);
+
+ /* Maximun bandwidth is the minimun bandwidth of all component */
+ rdev->pm.max_bandwidth = rdev->pm.core_bandwidth;
+ if (sideport) {
+ if (rdev->pm.max_bandwidth.full > rdev->pm.sideport_bandwidth.full &&
+ rdev->pm.sideport_bandwidth.full)
+ rdev->pm.max_bandwidth = rdev->pm.sideport_bandwidth;
+ read_delay_latency.full = rfixed_const(370 * 800 * 1000);
+ read_delay_latency.full = rfixed_div(read_delay_latency,
+ rdev->pm.igp_sideport_mclk);
+ } else {
+ if (rdev->pm.max_bandwidth.full > rdev->pm.k8_bandwidth.full &&
+ rdev->pm.k8_bandwidth.full)
+ rdev->pm.max_bandwidth = rdev->pm.k8_bandwidth;
+ if (rdev->pm.max_bandwidth.full > rdev->pm.ht_bandwidth.full &&
+ rdev->pm.ht_bandwidth.full)
+ rdev->pm.max_bandwidth = rdev->pm.ht_bandwidth;
+ read_delay_latency.full = rfixed_const(5000);
+ }
+
+ /* sclk = system clocks(ns) = 1000 / max_bandwidth / 16 */
+ a.full = rfixed_const(16);
+ rdev->pm.sclk.full = rfixed_mul(rdev->pm.max_bandwidth, a);
+ a.full = rfixed_const(1000);
+ rdev->pm.sclk.full = rfixed_div(a, rdev->pm.sclk);
+ /* Determine chunk time
+ * ChunkTime = the time it takes the DCP to send one chunk of data
+ * to the LB which consists of pipeline delay and inter chunk gap
+ * sclk = system clock(ns)
+ */
+ a.full = rfixed_const(256 * 13);
+ chunk_time.full = rfixed_mul(rdev->pm.sclk, a);
+ a.full = rfixed_const(10);
+ chunk_time.full = rfixed_div(chunk_time, a);
+
+ /* Determine the worst case latency
+ * NumLinePair = Number of line pairs to request(1=2 lines, 2=4 lines)
+ * WorstCaseLatency = worst case time from urgent to when the MC starts
+ * to return data
+ * READ_DELAY_IDLE_MAX = constant of 1us
+ * ChunkTime = time it takes the DCP to send one chunk of data to the LB
+ * which consists of pipeline delay and inter chunk gap
+ */
+ if (rfixed_trunc(wm->num_line_pair) > 1) {
+ a.full = rfixed_const(3);
+ wm->worst_case_latency.full = rfixed_mul(a, chunk_time);
+ wm->worst_case_latency.full += read_delay_latency.full;
+ } else {
+ a.full = rfixed_const(2);
+ wm->worst_case_latency.full = rfixed_mul(a, chunk_time);
+ wm->worst_case_latency.full += read_delay_latency.full;
+ }
+
+ /* Determine the tolerable latency
+ * TolerableLatency = Any given request has only 1 line time
+ * for the data to be returned
+ * LBRequestFifoDepth = Number of chunk requests the LB can
+ * put into the request FIFO for a display
+ * LineTime = total time for one line of display
+ * ChunkTime = the time it takes the DCP to send one chunk
+ * of data to the LB which consists of
+ * pipeline delay and inter chunk gap
+ */
+ if ((2+wm->lb_request_fifo_depth) >= rfixed_trunc(request_fifo_depth)) {
+ tolerable_latency.full = line_time.full;
+ } else {
+ tolerable_latency.full = rfixed_const(wm->lb_request_fifo_depth - 2);
+ tolerable_latency.full = request_fifo_depth.full - tolerable_latency.full;
+ tolerable_latency.full = rfixed_mul(tolerable_latency, chunk_time);
+ tolerable_latency.full = line_time.full - tolerable_latency.full;
+ }
+ /* We assume worst case 32bits (4 bytes) */
+ wm->dbpp.full = rfixed_const(4 * 8);
+
+ /* Determine the maximum priority mark
+ * width = viewport width in pixels
+ */
+ a.full = rfixed_const(16);
+ wm->priority_mark_max.full = rfixed_const(crtc->base.mode.crtc_hdisplay);
+ wm->priority_mark_max.full = rfixed_div(wm->priority_mark_max, a);
+
+ /* Determine estimated width */
+ estimated_width.full = tolerable_latency.full - wm->worst_case_latency.full;
+ estimated_width.full = rfixed_div(estimated_width, consumption_time);
+ if (rfixed_trunc(estimated_width) > crtc->base.mode.crtc_hdisplay) {
+ wm->priority_mark.full = rfixed_const(10);
+ } else {
+ a.full = rfixed_const(16);
+ wm->priority_mark.full = rfixed_div(estimated_width, a);
+ wm->priority_mark.full = wm->priority_mark_max.full - wm->priority_mark.full;
+ }
}
+void rs690_bandwidth_update(struct radeon_device *rdev)
+{
+ struct drm_display_mode *mode0 = NULL;
+ struct drm_display_mode *mode1 = NULL;
+ struct rs690_watermark wm0;
+ struct rs690_watermark wm1;
+ u32 tmp;
+ fixed20_12 priority_mark02, priority_mark12, fill_rate;
+ fixed20_12 a, b;
+
+ if (rdev->mode_info.crtcs[0]->base.enabled)
+ mode0 = &rdev->mode_info.crtcs[0]->base.mode;
+ if (rdev->mode_info.crtcs[1]->base.enabled)
+ mode1 = &rdev->mode_info.crtcs[1]->base.mode;
+ /*
+ * Set display0/1 priority up in the memory controller for
+ * modes if the user specifies HIGH for displaypriority
+ * option.
+ */
+ if (rdev->disp_priority == 2) {
+ tmp = RREG32_MC(MC_INIT_MISC_LAT_TIMER);
+ tmp &= ~MC_DISP1R_INIT_LAT_MASK;
+ tmp &= ~MC_DISP0R_INIT_LAT_MASK;
+ if (mode1)
+ tmp |= (1 << MC_DISP1R_INIT_LAT_SHIFT);
+ if (mode0)
+ tmp |= (1 << MC_DISP0R_INIT_LAT_SHIFT);
+ WREG32_MC(MC_INIT_MISC_LAT_TIMER, tmp);
+ }
+ rs690_line_buffer_adjust(rdev, mode0, mode1);
+
+ if ((rdev->family == CHIP_RS690) || (rdev->family == CHIP_RS740))
+ WREG32(DCP_CONTROL, 0);
+ if ((rdev->family == CHIP_RS780) || (rdev->family == CHIP_RS880))
+ WREG32(DCP_CONTROL, 2);
+
+ rs690_crtc_bandwidth_compute(rdev, rdev->mode_info.crtcs[0], &wm0);
+ rs690_crtc_bandwidth_compute(rdev, rdev->mode_info.crtcs[1], &wm1);
+
+ tmp = (wm0.lb_request_fifo_depth - 1);
+ tmp |= (wm1.lb_request_fifo_depth - 1) << 16;
+ WREG32(LB_MAX_REQ_OUTSTANDING, tmp);
+
+ if (mode0 && mode1) {
+ if (rfixed_trunc(wm0.dbpp) > 64)
+ a.full = rfixed_mul(wm0.dbpp, wm0.num_line_pair);
+ else
+ a.full = wm0.num_line_pair.full;
+ if (rfixed_trunc(wm1.dbpp) > 64)
+ b.full = rfixed_mul(wm1.dbpp, wm1.num_line_pair);
+ else
+ b.full = wm1.num_line_pair.full;
+ a.full += b.full;
+ fill_rate.full = rfixed_div(wm0.sclk, a);
+ if (wm0.consumption_rate.full > fill_rate.full) {
+ b.full = wm0.consumption_rate.full - fill_rate.full;
+ b.full = rfixed_mul(b, wm0.active_time);
+ a.full = rfixed_mul(wm0.worst_case_latency,
+ wm0.consumption_rate);
+ a.full = a.full + b.full;
+ b.full = rfixed_const(16 * 1000);
+ priority_mark02.full = rfixed_div(a, b);
+ } else {
+ a.full = rfixed_mul(wm0.worst_case_latency,
+ wm0.consumption_rate);
+ b.full = rfixed_const(16 * 1000);
+ priority_mark02.full = rfixed_div(a, b);
+ }
+ if (wm1.consumption_rate.full > fill_rate.full) {
+ b.full = wm1.consumption_rate.full - fill_rate.full;
+ b.full = rfixed_mul(b, wm1.active_time);
+ a.full = rfixed_mul(wm1.worst_case_latency,
+ wm1.consumption_rate);
+ a.full = a.full + b.full;
+ b.full = rfixed_const(16 * 1000);
+ priority_mark12.full = rfixed_div(a, b);
+ } else {
+ a.full = rfixed_mul(wm1.worst_case_latency,
+ wm1.consumption_rate);
+ b.full = rfixed_const(16 * 1000);
+ priority_mark12.full = rfixed_div(a, b);
+ }
+ if (wm0.priority_mark.full > priority_mark02.full)
+ priority_mark02.full = wm0.priority_mark.full;
+ if (rfixed_trunc(priority_mark02) < 0)
+ priority_mark02.full = 0;
+ if (wm0.priority_mark_max.full > priority_mark02.full)
+ priority_mark02.full = wm0.priority_mark_max.full;
+ if (wm1.priority_mark.full > priority_mark12.full)
+ priority_mark12.full = wm1.priority_mark.full;
+ if (rfixed_trunc(priority_mark12) < 0)
+ priority_mark12.full = 0;
+ if (wm1.priority_mark_max.full > priority_mark12.full)
+ priority_mark12.full = wm1.priority_mark_max.full;
+ WREG32(D1MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark02));
+ WREG32(D1MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark02));
+ WREG32(D2MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark12));
+ WREG32(D2MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark12));
+ } else if (mode0) {
+ if (rfixed_trunc(wm0.dbpp) > 64)
+ a.full = rfixed_mul(wm0.dbpp, wm0.num_line_pair);
+ else
+ a.full = wm0.num_line_pair.full;
+ fill_rate.full = rfixed_div(wm0.sclk, a);
+ if (wm0.consumption_rate.full > fill_rate.full) {
+ b.full = wm0.consumption_rate.full - fill_rate.full;
+ b.full = rfixed_mul(b, wm0.active_time);
+ a.full = rfixed_mul(wm0.worst_case_latency,
+ wm0.consumption_rate);
+ a.full = a.full + b.full;
+ b.full = rfixed_const(16 * 1000);
+ priority_mark02.full = rfixed_div(a, b);
+ } else {
+ a.full = rfixed_mul(wm0.worst_case_latency,
+ wm0.consumption_rate);
+ b.full = rfixed_const(16 * 1000);
+ priority_mark02.full = rfixed_div(a, b);
+ }
+ if (wm0.priority_mark.full > priority_mark02.full)
+ priority_mark02.full = wm0.priority_mark.full;
+ if (rfixed_trunc(priority_mark02) < 0)
+ priority_mark02.full = 0;
+ if (wm0.priority_mark_max.full > priority_mark02.full)
+ priority_mark02.full = wm0.priority_mark_max.full;
+ WREG32(D1MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark02));
+ WREG32(D1MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark02));
+ WREG32(D2MODE_PRIORITY_A_CNT, MODE_PRIORITY_OFF);
+ WREG32(D2MODE_PRIORITY_B_CNT, MODE_PRIORITY_OFF);
+ } else {
+ if (rfixed_trunc(wm1.dbpp) > 64)
+ a.full = rfixed_mul(wm1.dbpp, wm1.num_line_pair);
+ else
+ a.full = wm1.num_line_pair.full;
+ fill_rate.full = rfixed_div(wm1.sclk, a);
+ if (wm1.consumption_rate.full > fill_rate.full) {
+ b.full = wm1.consumption_rate.full - fill_rate.full;
+ b.full = rfixed_mul(b, wm1.active_time);
+ a.full = rfixed_mul(wm1.worst_case_latency,
+ wm1.consumption_rate);
+ a.full = a.full + b.full;
+ b.full = rfixed_const(16 * 1000);
+ priority_mark12.full = rfixed_div(a, b);
+ } else {
+ a.full = rfixed_mul(wm1.worst_case_latency,
+ wm1.consumption_rate);
+ b.full = rfixed_const(16 * 1000);
+ priority_mark12.full = rfixed_div(a, b);
+ }
+ if (wm1.priority_mark.full > priority_mark12.full)
+ priority_mark12.full = wm1.priority_mark.full;
+ if (rfixed_trunc(priority_mark12) < 0)
+ priority_mark12.full = 0;
+ if (wm1.priority_mark_max.full > priority_mark12.full)
+ priority_mark12.full = wm1.priority_mark_max.full;
+ WREG32(D1MODE_PRIORITY_A_CNT, MODE_PRIORITY_OFF);
+ WREG32(D1MODE_PRIORITY_B_CNT, MODE_PRIORITY_OFF);
+ WREG32(D2MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark12));
+ WREG32(D2MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark12));
+ }
+}
/*
* Indirect registers accessor
WREG32(RS690_MC_DATA, v);
WREG32(RS690_MC_INDEX, RS690_MC_INDEX_WR_ACK);
}
+
--- /dev/null
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ * Alex Deucher
+ * Jerome Glisse
+ */
+#ifndef RS690R_H
+#define RS690R_H
+
+/* RS690/RS740 registers */
+#define MC_INDEX 0x0078
+# define MC_INDEX_MASK 0x1FF
+# define MC_INDEX_WR_EN (1 << 9)
+# define MC_INDEX_WR_ACK 0x7F
+#define MC_DATA 0x007C
+#define HDP_FB_LOCATION 0x0134
+#define DC_LB_MEMORY_SPLIT 0x6520
+#define DC_LB_MEMORY_SPLIT_MASK 0x00000003
+#define DC_LB_MEMORY_SPLIT_SHIFT 0
+#define DC_LB_MEMORY_SPLIT_D1HALF_D2HALF 0
+#define DC_LB_MEMORY_SPLIT_D1_3Q_D2_1Q 1
+#define DC_LB_MEMORY_SPLIT_D1_ONLY 2
+#define DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q 3
+#define DC_LB_MEMORY_SPLIT_SHIFT_MODE (1 << 2)
+#define DC_LB_DISP1_END_ADR_SHIFT 4
+#define DC_LB_DISP1_END_ADR_MASK 0x00007FF0
+#define D1MODE_PRIORITY_A_CNT 0x6548
+#define MODE_PRIORITY_MARK_MASK 0x00007FFF
+#define MODE_PRIORITY_OFF (1 << 16)
+#define MODE_PRIORITY_ALWAYS_ON (1 << 20)
+#define MODE_PRIORITY_FORCE_MASK (1 << 24)
+#define D1MODE_PRIORITY_B_CNT 0x654C
+#define LB_MAX_REQ_OUTSTANDING 0x6D58
+#define LB_D1_MAX_REQ_OUTSTANDING_MASK 0x0000000F
+#define LB_D1_MAX_REQ_OUTSTANDING_SHIFT 0
+#define LB_D2_MAX_REQ_OUTSTANDING_MASK 0x000F0000
+#define LB_D2_MAX_REQ_OUTSTANDING_SHIFT 16
+#define DCP_CONTROL 0x6C9C
+#define D2MODE_PRIORITY_A_CNT 0x6D48
+#define D2MODE_PRIORITY_B_CNT 0x6D4C
+
+/* MC indirect registers */
+#define MC_STATUS_IDLE (1 << 0)
+#define MC_MISC_CNTL 0x18
+#define DISABLE_GTW (1 << 1)
+#define GART_INDEX_REG_EN (1 << 12)
+#define BLOCK_GFX_D3_EN (1 << 14)
+#define GART_FEATURE_ID 0x2B
+#define HANG_EN (1 << 11)
+#define TLB_ENABLE (1 << 18)
+#define P2P_ENABLE (1 << 19)
+#define GTW_LAC_EN (1 << 25)
+#define LEVEL2_GART (0 << 30)
+#define LEVEL1_GART (1 << 30)
+#define PDC_EN (1 << 31)
+#define GART_BASE 0x2C
+#define GART_CACHE_CNTRL 0x2E
+# define GART_CACHE_INVALIDATE (1 << 0)
+#define MC_STATUS 0x90
+#define MCCFG_FB_LOCATION 0x100
+#define MC_FB_START_MASK 0x0000FFFF
+#define MC_FB_START_SHIFT 0
+#define MC_FB_TOP_MASK 0xFFFF0000
+#define MC_FB_TOP_SHIFT 16
+#define MCCFG_AGP_LOCATION 0x101
+#define MC_AGP_START_MASK 0x0000FFFF
+#define MC_AGP_START_SHIFT 0
+#define MC_AGP_TOP_MASK 0xFFFF0000
+#define MC_AGP_TOP_SHIFT 16
+#define MCCFG_AGP_BASE 0x102
+#define MCCFG_AGP_BASE_2 0x103
+#define MC_INIT_MISC_LAT_TIMER 0x104
+#define MC_DISP0R_INIT_LAT_SHIFT 8
+#define MC_DISP0R_INIT_LAT_MASK 0x00000F00
+#define MC_DISP1R_INIT_LAT_SHIFT 12
+#define MC_DISP1R_INIT_LAT_MASK 0x0000F000
+
+#endif
*/
#include <linux/seq_file.h>
#include "drmP.h"
-#include "radeon_reg.h"
+#include "rv515r.h"
#include "radeon.h"
+#include "radeon_share.h"
/* rv515 depends on : */
void r100_hdp_reset(struct radeon_device *rdev);
"programming pipes. Bad things might happen.\n");
}
/* Write VRAM size in case we are limiting it */
- WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size);
- tmp = REG_SET(RV515_MC_FB_START, rdev->mc.vram_location >> 16);
+ WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
+ tmp = REG_SET(MC_FB_START, rdev->mc.vram_location >> 16);
WREG32(0x134, tmp);
- tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
- tmp = REG_SET(RV515_MC_FB_TOP, tmp >> 16);
- tmp |= REG_SET(RV515_MC_FB_START, rdev->mc.vram_location >> 16);
- WREG32_MC(RV515_MC_FB_LOCATION, tmp);
- WREG32(RS690_HDP_FB_LOCATION, rdev->mc.vram_location >> 16);
+ tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
+ tmp = REG_SET(MC_FB_TOP, tmp >> 16);
+ tmp |= REG_SET(MC_FB_START, rdev->mc.vram_location >> 16);
+ WREG32_MC(MC_FB_LOCATION, tmp);
+ WREG32(HDP_FB_LOCATION, rdev->mc.vram_location >> 16);
WREG32(0x310, rdev->mc.vram_location);
if (rdev->flags & RADEON_IS_AGP) {
tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - 1;
- tmp = REG_SET(RV515_MC_AGP_TOP, tmp >> 16);
- tmp |= REG_SET(RV515_MC_AGP_START, rdev->mc.gtt_location >> 16);
- WREG32_MC(RV515_MC_AGP_LOCATION, tmp);
- WREG32_MC(RV515_MC_AGP_BASE, rdev->mc.agp_base);
- WREG32_MC(RV515_MC_AGP_BASE_2, 0);
+ tmp = REG_SET(MC_AGP_TOP, tmp >> 16);
+ tmp |= REG_SET(MC_AGP_START, rdev->mc.gtt_location >> 16);
+ WREG32_MC(MC_AGP_LOCATION, tmp);
+ WREG32_MC(MC_AGP_BASE, rdev->mc.agp_base);
+ WREG32_MC(MC_AGP_BASE_2, 0);
} else {
- WREG32_MC(RV515_MC_AGP_LOCATION, 0x0FFFFFFF);
- WREG32_MC(RV515_MC_AGP_BASE, 0);
- WREG32_MC(RV515_MC_AGP_BASE_2, 0);
+ WREG32_MC(MC_AGP_LOCATION, 0x0FFFFFFF);
+ WREG32_MC(MC_AGP_BASE, 0);
+ WREG32_MC(MC_AGP_BASE_2, 0);
}
return 0;
}
*/
void rv515_ring_start(struct radeon_device *rdev)
{
- unsigned gb_tile_config;
int r;
- /* Sub pixel 1/12 so we can have 4K rendering according to doc */
- gb_tile_config = R300_ENABLE_TILING | R300_TILE_SIZE_16;
- switch (rdev->num_gb_pipes) {
- case 2:
- gb_tile_config |= R300_PIPE_COUNT_R300;
- break;
- case 3:
- gb_tile_config |= R300_PIPE_COUNT_R420_3P;
- break;
- case 4:
- gb_tile_config |= R300_PIPE_COUNT_R420;
- break;
- case 1:
- default:
- gb_tile_config |= R300_PIPE_COUNT_RV350;
- break;
- }
-
r = radeon_ring_lock(rdev, 64);
if (r) {
return;
}
- radeon_ring_write(rdev, PACKET0(RADEON_ISYNC_CNTL, 0));
- radeon_ring_write(rdev,
- RADEON_ISYNC_ANY2D_IDLE3D |
- RADEON_ISYNC_ANY3D_IDLE2D |
- RADEON_ISYNC_WAIT_IDLEGUI |
- RADEON_ISYNC_CPSCRATCH_IDLEGUI);
- radeon_ring_write(rdev, PACKET0(R300_GB_TILE_CONFIG, 0));
- radeon_ring_write(rdev, gb_tile_config);
- radeon_ring_write(rdev, PACKET0(RADEON_WAIT_UNTIL, 0));
+ radeon_ring_write(rdev, PACKET0(ISYNC_CNTL, 0));
radeon_ring_write(rdev,
- RADEON_WAIT_2D_IDLECLEAN |
- RADEON_WAIT_3D_IDLECLEAN);
+ ISYNC_ANY2D_IDLE3D |
+ ISYNC_ANY3D_IDLE2D |
+ ISYNC_WAIT_IDLEGUI |
+ ISYNC_CPSCRATCH_IDLEGUI);
+ radeon_ring_write(rdev, PACKET0(WAIT_UNTIL, 0));
+ radeon_ring_write(rdev, WAIT_2D_IDLECLEAN | WAIT_3D_IDLECLEAN);
radeon_ring_write(rdev, PACKET0(0x170C, 0));
radeon_ring_write(rdev, 1 << 31);
- radeon_ring_write(rdev, PACKET0(R300_GB_SELECT, 0));
+ radeon_ring_write(rdev, PACKET0(GB_SELECT, 0));
radeon_ring_write(rdev, 0);
- radeon_ring_write(rdev, PACKET0(R300_GB_ENABLE, 0));
+ radeon_ring_write(rdev, PACKET0(GB_ENABLE, 0));
radeon_ring_write(rdev, 0);
radeon_ring_write(rdev, PACKET0(0x42C8, 0));
radeon_ring_write(rdev, (1 << rdev->num_gb_pipes) - 1);
- radeon_ring_write(rdev, PACKET0(R500_VAP_INDEX_OFFSET, 0));
+ radeon_ring_write(rdev, PACKET0(VAP_INDEX_OFFSET, 0));
radeon_ring_write(rdev, 0);
- radeon_ring_write(rdev, PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
- radeon_ring_write(rdev, R300_RB3D_DC_FLUSH | R300_RB3D_DC_FREE);
- radeon_ring_write(rdev, PACKET0(R300_RB3D_ZCACHE_CTLSTAT, 0));
- radeon_ring_write(rdev, R300_ZC_FLUSH | R300_ZC_FREE);
- radeon_ring_write(rdev, PACKET0(RADEON_WAIT_UNTIL, 0));
- radeon_ring_write(rdev,
- RADEON_WAIT_2D_IDLECLEAN |
- RADEON_WAIT_3D_IDLECLEAN);
- radeon_ring_write(rdev, PACKET0(R300_GB_AA_CONFIG, 0));
+ radeon_ring_write(rdev, PACKET0(RB3D_DSTCACHE_CTLSTAT, 0));
+ radeon_ring_write(rdev, RB3D_DC_FLUSH | RB3D_DC_FREE);
+ radeon_ring_write(rdev, PACKET0(ZB_ZCACHE_CTLSTAT, 0));
+ radeon_ring_write(rdev, ZC_FLUSH | ZC_FREE);
+ radeon_ring_write(rdev, PACKET0(WAIT_UNTIL, 0));
+ radeon_ring_write(rdev, WAIT_2D_IDLECLEAN | WAIT_3D_IDLECLEAN);
+ radeon_ring_write(rdev, PACKET0(GB_AA_CONFIG, 0));
radeon_ring_write(rdev, 0);
- radeon_ring_write(rdev, PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
- radeon_ring_write(rdev, R300_RB3D_DC_FLUSH | R300_RB3D_DC_FREE);
- radeon_ring_write(rdev, PACKET0(R300_RB3D_ZCACHE_CTLSTAT, 0));
- radeon_ring_write(rdev, R300_ZC_FLUSH | R300_ZC_FREE);
- radeon_ring_write(rdev, PACKET0(R300_GB_MSPOS0, 0));
- radeon_ring_write(rdev,
- ((6 << R300_MS_X0_SHIFT) |
- (6 << R300_MS_Y0_SHIFT) |
- (6 << R300_MS_X1_SHIFT) |
- (6 << R300_MS_Y1_SHIFT) |
- (6 << R300_MS_X2_SHIFT) |
- (6 << R300_MS_Y2_SHIFT) |
- (6 << R300_MSBD0_Y_SHIFT) |
- (6 << R300_MSBD0_X_SHIFT)));
- radeon_ring_write(rdev, PACKET0(R300_GB_MSPOS1, 0));
- radeon_ring_write(rdev,
- ((6 << R300_MS_X3_SHIFT) |
- (6 << R300_MS_Y3_SHIFT) |
- (6 << R300_MS_X4_SHIFT) |
- (6 << R300_MS_Y4_SHIFT) |
- (6 << R300_MS_X5_SHIFT) |
- (6 << R300_MS_Y5_SHIFT) |
- (6 << R300_MSBD1_SHIFT)));
- radeon_ring_write(rdev, PACKET0(R300_GA_ENHANCE, 0));
- radeon_ring_write(rdev, R300_GA_DEADLOCK_CNTL | R300_GA_FASTSYNC_CNTL);
- radeon_ring_write(rdev, PACKET0(R300_GA_POLY_MODE, 0));
+ radeon_ring_write(rdev, PACKET0(RB3D_DSTCACHE_CTLSTAT, 0));
+ radeon_ring_write(rdev, RB3D_DC_FLUSH | RB3D_DC_FREE);
+ radeon_ring_write(rdev, PACKET0(ZB_ZCACHE_CTLSTAT, 0));
+ radeon_ring_write(rdev, ZC_FLUSH | ZC_FREE);
+ radeon_ring_write(rdev, PACKET0(GB_MSPOS0, 0));
radeon_ring_write(rdev,
- R300_FRONT_PTYPE_TRIANGE | R300_BACK_PTYPE_TRIANGE);
- radeon_ring_write(rdev, PACKET0(R300_GA_ROUND_MODE, 0));
+ ((6 << MS_X0_SHIFT) |
+ (6 << MS_Y0_SHIFT) |
+ (6 << MS_X1_SHIFT) |
+ (6 << MS_Y1_SHIFT) |
+ (6 << MS_X2_SHIFT) |
+ (6 << MS_Y2_SHIFT) |
+ (6 << MSBD0_Y_SHIFT) |
+ (6 << MSBD0_X_SHIFT)));
+ radeon_ring_write(rdev, PACKET0(GB_MSPOS1, 0));
radeon_ring_write(rdev,
- R300_GEOMETRY_ROUND_NEAREST |
- R300_COLOR_ROUND_NEAREST);
+ ((6 << MS_X3_SHIFT) |
+ (6 << MS_Y3_SHIFT) |
+ (6 << MS_X4_SHIFT) |
+ (6 << MS_Y4_SHIFT) |
+ (6 << MS_X5_SHIFT) |
+ (6 << MS_Y5_SHIFT) |
+ (6 << MSBD1_SHIFT)));
+ radeon_ring_write(rdev, PACKET0(GA_ENHANCE, 0));
+ radeon_ring_write(rdev, GA_DEADLOCK_CNTL | GA_FASTSYNC_CNTL);
+ radeon_ring_write(rdev, PACKET0(GA_POLY_MODE, 0));
+ radeon_ring_write(rdev, FRONT_PTYPE_TRIANGE | BACK_PTYPE_TRIANGE);
+ radeon_ring_write(rdev, PACKET0(GA_ROUND_MODE, 0));
+ radeon_ring_write(rdev, GEOMETRY_ROUND_NEAREST | COLOR_ROUND_NEAREST);
radeon_ring_write(rdev, PACKET0(0x20C8, 0));
radeon_ring_write(rdev, 0);
radeon_ring_unlock_commit(rdev);
for (i = 0; i < rdev->usec_timeout; i++) {
/* read MC_STATUS */
- tmp = RREG32_MC(RV515_MC_STATUS);
- if (tmp & RV515_MC_STATUS_IDLE) {
+ tmp = RREG32_MC(MC_STATUS);
+ if (tmp & MC_STATUS_IDLE) {
return 0;
}
DRM_UDELAY(1);
reinit_cp = rdev->cp.ready;
rdev->cp.ready = false;
for (i = 0; i < rdev->usec_timeout; i++) {
- WREG32(RADEON_CP_CSQ_MODE, 0);
- WREG32(RADEON_CP_CSQ_CNTL, 0);
- WREG32(RADEON_RBBM_SOFT_RESET, 0x32005);
- (void)RREG32(RADEON_RBBM_SOFT_RESET);
+ WREG32(CP_CSQ_MODE, 0);
+ WREG32(CP_CSQ_CNTL, 0);
+ WREG32(RBBM_SOFT_RESET, 0x32005);
+ (void)RREG32(RBBM_SOFT_RESET);
udelay(200);
- WREG32(RADEON_RBBM_SOFT_RESET, 0);
+ WREG32(RBBM_SOFT_RESET, 0);
/* Wait to prevent race in RBBM_STATUS */
mdelay(1);
- tmp = RREG32(RADEON_RBBM_STATUS);
+ tmp = RREG32(RBBM_STATUS);
if (tmp & ((1 << 20) | (1 << 26))) {
DRM_ERROR("VAP & CP still busy (RBBM_STATUS=0x%08X)\n", tmp);
/* GA still busy soft reset it */
WREG32(0x429C, 0x200);
- WREG32(R300_VAP_PVS_STATE_FLUSH_REG, 0);
+ WREG32(VAP_PVS_STATE_FLUSH_REG, 0);
WREG32(0x43E0, 0);
WREG32(0x43E4, 0);
WREG32(0x24AC, 0);
}
/* Wait to prevent race in RBBM_STATUS */
mdelay(1);
- tmp = RREG32(RADEON_RBBM_STATUS);
+ tmp = RREG32(RBBM_STATUS);
if (!(tmp & ((1 << 20) | (1 << 26)))) {
break;
}
}
for (i = 0; i < rdev->usec_timeout; i++) {
- tmp = RREG32(RADEON_RBBM_STATUS);
+ tmp = RREG32(RBBM_STATUS);
if (!(tmp & ((1 << 20) | (1 << 26)))) {
DRM_INFO("GA reset succeed (RBBM_STATUS=0x%08X)\n",
tmp);
}
DRM_UDELAY(1);
}
- tmp = RREG32(RADEON_RBBM_STATUS);
+ tmp = RREG32(RBBM_STATUS);
DRM_ERROR("Failed to reset GA ! (RBBM_STATUS=0x%08X)\n", tmp);
return -1;
}
uint32_t status;
/* reset order likely matter */
- status = RREG32(RADEON_RBBM_STATUS);
+ status = RREG32(RBBM_STATUS);
/* reset HDP */
r100_hdp_reset(rdev);
/* reset rb2d */
rv515_ga_reset(rdev);
}
/* reset CP */
- status = RREG32(RADEON_RBBM_STATUS);
+ status = RREG32(RBBM_STATUS);
if (status & (1 << 16)) {
r100_cp_reset(rdev);
}
/* Check if GPU is idle */
- status = RREG32(RADEON_RBBM_STATUS);
+ status = RREG32(RBBM_STATUS);
if (status & (1 << 31)) {
DRM_ERROR("Failed to reset GPU (RBBM_STATUS=0x%08X)\n", status);
return -1;
rdev->mc.vram_width = 128;
rdev->mc.vram_is_ddr = true;
- tmp = RREG32_MC(RV515_MC_CNTL);
- tmp &= RV515_MEM_NUM_CHANNELS_MASK;
+ tmp = RREG32_MC(RV515_MC_CNTL) & MEM_NUM_CHANNELS_MASK;
switch (tmp) {
case 0:
rdev->mc.vram_width = 64;
void rv515_vram_info(struct radeon_device *rdev)
{
+ fixed20_12 a;
+
rv515_vram_get_type(rdev);
- rdev->mc.vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
- rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
- rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+ r100_vram_init_sizes(rdev);
+ /* FIXME: we should enforce default clock in case GPU is not in
+ * default setup
+ */
+ a.full = rfixed_const(100);
+ rdev->pm.sclk.full = rfixed_const(rdev->clock.default_sclk);
+ rdev->pm.sclk.full = rfixed_div(rdev->pm.sclk, a);
}
{
uint32_t r;
- WREG32(R520_MC_IND_INDEX, 0x7f0000 | (reg & 0xffff));
- r = RREG32(R520_MC_IND_DATA);
- WREG32(R520_MC_IND_INDEX, 0);
+ WREG32(MC_IND_INDEX, 0x7f0000 | (reg & 0xffff));
+ r = RREG32(MC_IND_DATA);
+ WREG32(MC_IND_INDEX, 0);
return r;
}
void rv515_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
{
- WREG32(R520_MC_IND_INDEX, 0xff0000 | ((reg) & 0xffff));
- WREG32(R520_MC_IND_DATA, (v));
- WREG32(R520_MC_IND_INDEX, 0);
-}
-
-uint32_t rv515_pcie_rreg(struct radeon_device *rdev, uint32_t reg)
-{
- uint32_t r;
-
- WREG32(RADEON_PCIE_INDEX, ((reg) & 0x7ff));
- (void)RREG32(RADEON_PCIE_INDEX);
- r = RREG32(RADEON_PCIE_DATA);
- return r;
-}
-
-void rv515_pcie_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
-{
- WREG32(RADEON_PCIE_INDEX, ((reg) & 0x7ff));
- (void)RREG32(RADEON_PCIE_INDEX);
- WREG32(RADEON_PCIE_DATA, (v));
- (void)RREG32(RADEON_PCIE_DATA);
+ WREG32(MC_IND_INDEX, 0xff0000 | ((reg) & 0xffff));
+ WREG32(MC_IND_DATA, (v));
+ WREG32(MC_IND_INDEX, 0);
}
-
/*
* Debugfs info
*/
struct radeon_device *rdev = dev->dev_private;
uint32_t tmp;
- tmp = RREG32(R400_GB_PIPE_SELECT);
+ tmp = RREG32(GB_PIPE_SELECT);
seq_printf(m, "GB_PIPE_SELECT 0x%08x\n", tmp);
- tmp = RREG32(R500_SU_REG_DEST);
+ tmp = RREG32(SU_REG_DEST);
seq_printf(m, "SU_REG_DEST 0x%08x\n", tmp);
- tmp = RREG32(R300_GB_TILE_CONFIG);
+ tmp = RREG32(GB_TILE_CONFIG);
seq_printf(m, "GB_TILE_CONFIG 0x%08x\n", tmp);
- tmp = RREG32(R300_DST_PIPE_CONFIG);
+ tmp = RREG32(DST_PIPE_CONFIG);
seq_printf(m, "DST_PIPE_CONFIG 0x%08x\n", tmp);
return 0;
}
/*
* Asic initialization
*/
-static const unsigned r500_reg_safe_bm[159] = {
+static const unsigned r500_reg_safe_bm[219] = {
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
- 0xFFFFFFBF, 0xFFFFFFFF, 0xFFFFFFBF, 0xFFFFFFFF,
0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFF80FFFF,
0x00000000, 0x00000000, 0x00000000, 0x00000000,
- 0x0003FC01, 0x3FFFFCF8, 0xFE800B19,
+ 0x0003FC01, 0x3FFFFCF8, 0xFF800B19, 0xFFDFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
};
-
-
int rv515_init(struct radeon_device *rdev)
{
rdev->config.r300.reg_safe_bm = r500_reg_safe_bm;
rdev->config.r300.reg_safe_bm_size = ARRAY_SIZE(r500_reg_safe_bm);
return 0;
}
+
+void atom_rv515_force_tv_scaler(struct radeon_device *rdev)
+{
+
+ WREG32(0x659C, 0x0);
+ WREG32(0x6594, 0x705);
+ WREG32(0x65A4, 0x10001);
+ WREG32(0x65D8, 0x0);
+ WREG32(0x65B0, 0x0);
+ WREG32(0x65C0, 0x0);
+ WREG32(0x65D4, 0x0);
+ WREG32(0x6578, 0x0);
+ WREG32(0x657C, 0x841880A8);
+ WREG32(0x6578, 0x1);
+ WREG32(0x657C, 0x84208680);
+ WREG32(0x6578, 0x2);
+ WREG32(0x657C, 0xBFF880B0);
+ WREG32(0x6578, 0x100);
+ WREG32(0x657C, 0x83D88088);
+ WREG32(0x6578, 0x101);
+ WREG32(0x657C, 0x84608680);
+ WREG32(0x6578, 0x102);
+ WREG32(0x657C, 0xBFF080D0);
+ WREG32(0x6578, 0x200);
+ WREG32(0x657C, 0x83988068);
+ WREG32(0x6578, 0x201);
+ WREG32(0x657C, 0x84A08680);
+ WREG32(0x6578, 0x202);
+ WREG32(0x657C, 0xBFF080F8);
+ WREG32(0x6578, 0x300);
+ WREG32(0x657C, 0x83588058);
+ WREG32(0x6578, 0x301);
+ WREG32(0x657C, 0x84E08660);
+ WREG32(0x6578, 0x302);
+ WREG32(0x657C, 0xBFF88120);
+ WREG32(0x6578, 0x400);
+ WREG32(0x657C, 0x83188040);
+ WREG32(0x6578, 0x401);
+ WREG32(0x657C, 0x85008660);
+ WREG32(0x6578, 0x402);
+ WREG32(0x657C, 0xBFF88150);
+ WREG32(0x6578, 0x500);
+ WREG32(0x657C, 0x82D88030);
+ WREG32(0x6578, 0x501);
+ WREG32(0x657C, 0x85408640);
+ WREG32(0x6578, 0x502);
+ WREG32(0x657C, 0xBFF88180);
+ WREG32(0x6578, 0x600);
+ WREG32(0x657C, 0x82A08018);
+ WREG32(0x6578, 0x601);
+ WREG32(0x657C, 0x85808620);
+ WREG32(0x6578, 0x602);
+ WREG32(0x657C, 0xBFF081B8);
+ WREG32(0x6578, 0x700);
+ WREG32(0x657C, 0x82608010);
+ WREG32(0x6578, 0x701);
+ WREG32(0x657C, 0x85A08600);
+ WREG32(0x6578, 0x702);
+ WREG32(0x657C, 0x800081F0);
+ WREG32(0x6578, 0x800);
+ WREG32(0x657C, 0x8228BFF8);
+ WREG32(0x6578, 0x801);
+ WREG32(0x657C, 0x85E085E0);
+ WREG32(0x6578, 0x802);
+ WREG32(0x657C, 0xBFF88228);
+ WREG32(0x6578, 0x10000);
+ WREG32(0x657C, 0x82A8BF00);
+ WREG32(0x6578, 0x10001);
+ WREG32(0x657C, 0x82A08CC0);
+ WREG32(0x6578, 0x10002);
+ WREG32(0x657C, 0x8008BEF8);
+ WREG32(0x6578, 0x10100);
+ WREG32(0x657C, 0x81F0BF28);
+ WREG32(0x6578, 0x10101);
+ WREG32(0x657C, 0x83608CA0);
+ WREG32(0x6578, 0x10102);
+ WREG32(0x657C, 0x8018BED0);
+ WREG32(0x6578, 0x10200);
+ WREG32(0x657C, 0x8148BF38);
+ WREG32(0x6578, 0x10201);
+ WREG32(0x657C, 0x84408C80);
+ WREG32(0x6578, 0x10202);
+ WREG32(0x657C, 0x8008BEB8);
+ WREG32(0x6578, 0x10300);
+ WREG32(0x657C, 0x80B0BF78);
+ WREG32(0x6578, 0x10301);
+ WREG32(0x657C, 0x85008C20);
+ WREG32(0x6578, 0x10302);
+ WREG32(0x657C, 0x8020BEA0);
+ WREG32(0x6578, 0x10400);
+ WREG32(0x657C, 0x8028BF90);
+ WREG32(0x6578, 0x10401);
+ WREG32(0x657C, 0x85E08BC0);
+ WREG32(0x6578, 0x10402);
+ WREG32(0x657C, 0x8018BE90);
+ WREG32(0x6578, 0x10500);
+ WREG32(0x657C, 0xBFB8BFB0);
+ WREG32(0x6578, 0x10501);
+ WREG32(0x657C, 0x86C08B40);
+ WREG32(0x6578, 0x10502);
+ WREG32(0x657C, 0x8010BE90);
+ WREG32(0x6578, 0x10600);
+ WREG32(0x657C, 0xBF58BFC8);
+ WREG32(0x6578, 0x10601);
+ WREG32(0x657C, 0x87A08AA0);
+ WREG32(0x6578, 0x10602);
+ WREG32(0x657C, 0x8010BE98);
+ WREG32(0x6578, 0x10700);
+ WREG32(0x657C, 0xBF10BFF0);
+ WREG32(0x6578, 0x10701);
+ WREG32(0x657C, 0x886089E0);
+ WREG32(0x6578, 0x10702);
+ WREG32(0x657C, 0x8018BEB0);
+ WREG32(0x6578, 0x10800);
+ WREG32(0x657C, 0xBED8BFE8);
+ WREG32(0x6578, 0x10801);
+ WREG32(0x657C, 0x89408940);
+ WREG32(0x6578, 0x10802);
+ WREG32(0x657C, 0xBFE8BED8);
+ WREG32(0x6578, 0x20000);
+ WREG32(0x657C, 0x80008000);
+ WREG32(0x6578, 0x20001);
+ WREG32(0x657C, 0x90008000);
+ WREG32(0x6578, 0x20002);
+ WREG32(0x657C, 0x80008000);
+ WREG32(0x6578, 0x20003);
+ WREG32(0x657C, 0x80008000);
+ WREG32(0x6578, 0x20100);
+ WREG32(0x657C, 0x80108000);
+ WREG32(0x6578, 0x20101);
+ WREG32(0x657C, 0x8FE0BF70);
+ WREG32(0x6578, 0x20102);
+ WREG32(0x657C, 0xBFE880C0);
+ WREG32(0x6578, 0x20103);
+ WREG32(0x657C, 0x80008000);
+ WREG32(0x6578, 0x20200);
+ WREG32(0x657C, 0x8018BFF8);
+ WREG32(0x6578, 0x20201);
+ WREG32(0x657C, 0x8F80BF08);
+ WREG32(0x6578, 0x20202);
+ WREG32(0x657C, 0xBFD081A0);
+ WREG32(0x6578, 0x20203);
+ WREG32(0x657C, 0xBFF88000);
+ WREG32(0x6578, 0x20300);
+ WREG32(0x657C, 0x80188000);
+ WREG32(0x6578, 0x20301);
+ WREG32(0x657C, 0x8EE0BEC0);
+ WREG32(0x6578, 0x20302);
+ WREG32(0x657C, 0xBFB082A0);
+ WREG32(0x6578, 0x20303);
+ WREG32(0x657C, 0x80008000);
+ WREG32(0x6578, 0x20400);
+ WREG32(0x657C, 0x80188000);
+ WREG32(0x6578, 0x20401);
+ WREG32(0x657C, 0x8E00BEA0);
+ WREG32(0x6578, 0x20402);
+ WREG32(0x657C, 0xBF8883C0);
+ WREG32(0x6578, 0x20403);
+ WREG32(0x657C, 0x80008000);
+ WREG32(0x6578, 0x20500);
+ WREG32(0x657C, 0x80188000);
+ WREG32(0x6578, 0x20501);
+ WREG32(0x657C, 0x8D00BE90);
+ WREG32(0x6578, 0x20502);
+ WREG32(0x657C, 0xBF588500);
+ WREG32(0x6578, 0x20503);
+ WREG32(0x657C, 0x80008008);
+ WREG32(0x6578, 0x20600);
+ WREG32(0x657C, 0x80188000);
+ WREG32(0x6578, 0x20601);
+ WREG32(0x657C, 0x8BC0BE98);
+ WREG32(0x6578, 0x20602);
+ WREG32(0x657C, 0xBF308660);
+ WREG32(0x6578, 0x20603);
+ WREG32(0x657C, 0x80008008);
+ WREG32(0x6578, 0x20700);
+ WREG32(0x657C, 0x80108000);
+ WREG32(0x6578, 0x20701);
+ WREG32(0x657C, 0x8A80BEB0);
+ WREG32(0x6578, 0x20702);
+ WREG32(0x657C, 0xBF0087C0);
+ WREG32(0x6578, 0x20703);
+ WREG32(0x657C, 0x80008008);
+ WREG32(0x6578, 0x20800);
+ WREG32(0x657C, 0x80108000);
+ WREG32(0x6578, 0x20801);
+ WREG32(0x657C, 0x8920BED0);
+ WREG32(0x6578, 0x20802);
+ WREG32(0x657C, 0xBED08920);
+ WREG32(0x6578, 0x20803);
+ WREG32(0x657C, 0x80008010);
+ WREG32(0x6578, 0x30000);
+ WREG32(0x657C, 0x90008000);
+ WREG32(0x6578, 0x30001);
+ WREG32(0x657C, 0x80008000);
+ WREG32(0x6578, 0x30100);
+ WREG32(0x657C, 0x8FE0BF90);
+ WREG32(0x6578, 0x30101);
+ WREG32(0x657C, 0xBFF880A0);
+ WREG32(0x6578, 0x30200);
+ WREG32(0x657C, 0x8F60BF40);
+ WREG32(0x6578, 0x30201);
+ WREG32(0x657C, 0xBFE88180);
+ WREG32(0x6578, 0x30300);
+ WREG32(0x657C, 0x8EC0BF00);
+ WREG32(0x6578, 0x30301);
+ WREG32(0x657C, 0xBFC88280);
+ WREG32(0x6578, 0x30400);
+ WREG32(0x657C, 0x8DE0BEE0);
+ WREG32(0x6578, 0x30401);
+ WREG32(0x657C, 0xBFA083A0);
+ WREG32(0x6578, 0x30500);
+ WREG32(0x657C, 0x8CE0BED0);
+ WREG32(0x6578, 0x30501);
+ WREG32(0x657C, 0xBF7884E0);
+ WREG32(0x6578, 0x30600);
+ WREG32(0x657C, 0x8BA0BED8);
+ WREG32(0x6578, 0x30601);
+ WREG32(0x657C, 0xBF508640);
+ WREG32(0x6578, 0x30700);
+ WREG32(0x657C, 0x8A60BEE8);
+ WREG32(0x6578, 0x30701);
+ WREG32(0x657C, 0xBF2087A0);
+ WREG32(0x6578, 0x30800);
+ WREG32(0x657C, 0x8900BF00);
+ WREG32(0x6578, 0x30801);
+ WREG32(0x657C, 0xBF008900);
+}
+
+struct rv515_watermark {
+ u32 lb_request_fifo_depth;
+ fixed20_12 num_line_pair;
+ fixed20_12 estimated_width;
+ fixed20_12 worst_case_latency;
+ fixed20_12 consumption_rate;
+ fixed20_12 active_time;
+ fixed20_12 dbpp;
+ fixed20_12 priority_mark_max;
+ fixed20_12 priority_mark;
+ fixed20_12 sclk;
+};
+
+void rv515_crtc_bandwidth_compute(struct radeon_device *rdev,
+ struct radeon_crtc *crtc,
+ struct rv515_watermark *wm)
+{
+ struct drm_display_mode *mode = &crtc->base.mode;
+ fixed20_12 a, b, c;
+ fixed20_12 pclk, request_fifo_depth, tolerable_latency, estimated_width;
+ fixed20_12 consumption_time, line_time, chunk_time, read_delay_latency;
+
+ if (!crtc->base.enabled) {
+ /* FIXME: wouldn't it better to set priority mark to maximum */
+ wm->lb_request_fifo_depth = 4;
+ return;
+ }
+
+ if (crtc->vsc.full > rfixed_const(2))
+ wm->num_line_pair.full = rfixed_const(2);
+ else
+ wm->num_line_pair.full = rfixed_const(1);
+
+ b.full = rfixed_const(mode->crtc_hdisplay);
+ c.full = rfixed_const(256);
+ a.full = rfixed_mul(wm->num_line_pair, b);
+ request_fifo_depth.full = rfixed_div(a, c);
+ if (a.full < rfixed_const(4)) {
+ wm->lb_request_fifo_depth = 4;
+ } else {
+ wm->lb_request_fifo_depth = rfixed_trunc(request_fifo_depth);
+ }
+
+ /* Determine consumption rate
+ * pclk = pixel clock period(ns) = 1000 / (mode.clock / 1000)
+ * vtaps = number of vertical taps,
+ * vsc = vertical scaling ratio, defined as source/destination
+ * hsc = horizontal scaling ration, defined as source/destination
+ */
+ a.full = rfixed_const(mode->clock);
+ b.full = rfixed_const(1000);
+ a.full = rfixed_div(a, b);
+ pclk.full = rfixed_div(b, a);
+ if (crtc->rmx_type != RMX_OFF) {
+ b.full = rfixed_const(2);
+ if (crtc->vsc.full > b.full)
+ b.full = crtc->vsc.full;
+ b.full = rfixed_mul(b, crtc->hsc);
+ c.full = rfixed_const(2);
+ b.full = rfixed_div(b, c);
+ consumption_time.full = rfixed_div(pclk, b);
+ } else {
+ consumption_time.full = pclk.full;
+ }
+ a.full = rfixed_const(1);
+ wm->consumption_rate.full = rfixed_div(a, consumption_time);
+
+
+ /* Determine line time
+ * LineTime = total time for one line of displayhtotal
+ * LineTime = total number of horizontal pixels
+ * pclk = pixel clock period(ns)
+ */
+ a.full = rfixed_const(crtc->base.mode.crtc_htotal);
+ line_time.full = rfixed_mul(a, pclk);
+
+ /* Determine active time
+ * ActiveTime = time of active region of display within one line,
+ * hactive = total number of horizontal active pixels
+ * htotal = total number of horizontal pixels
+ */
+ a.full = rfixed_const(crtc->base.mode.crtc_htotal);
+ b.full = rfixed_const(crtc->base.mode.crtc_hdisplay);
+ wm->active_time.full = rfixed_mul(line_time, b);
+ wm->active_time.full = rfixed_div(wm->active_time, a);
+
+ /* Determine chunk time
+ * ChunkTime = the time it takes the DCP to send one chunk of data
+ * to the LB which consists of pipeline delay and inter chunk gap
+ * sclk = system clock(Mhz)
+ */
+ a.full = rfixed_const(600 * 1000);
+ chunk_time.full = rfixed_div(a, rdev->pm.sclk);
+ read_delay_latency.full = rfixed_const(1000);
+
+ /* Determine the worst case latency
+ * NumLinePair = Number of line pairs to request(1=2 lines, 2=4 lines)
+ * WorstCaseLatency = worst case time from urgent to when the MC starts
+ * to return data
+ * READ_DELAY_IDLE_MAX = constant of 1us
+ * ChunkTime = time it takes the DCP to send one chunk of data to the LB
+ * which consists of pipeline delay and inter chunk gap
+ */
+ if (rfixed_trunc(wm->num_line_pair) > 1) {
+ a.full = rfixed_const(3);
+ wm->worst_case_latency.full = rfixed_mul(a, chunk_time);
+ wm->worst_case_latency.full += read_delay_latency.full;
+ } else {
+ wm->worst_case_latency.full = chunk_time.full + read_delay_latency.full;
+ }
+
+ /* Determine the tolerable latency
+ * TolerableLatency = Any given request has only 1 line time
+ * for the data to be returned
+ * LBRequestFifoDepth = Number of chunk requests the LB can
+ * put into the request FIFO for a display
+ * LineTime = total time for one line of display
+ * ChunkTime = the time it takes the DCP to send one chunk
+ * of data to the LB which consists of
+ * pipeline delay and inter chunk gap
+ */
+ if ((2+wm->lb_request_fifo_depth) >= rfixed_trunc(request_fifo_depth)) {
+ tolerable_latency.full = line_time.full;
+ } else {
+ tolerable_latency.full = rfixed_const(wm->lb_request_fifo_depth - 2);
+ tolerable_latency.full = request_fifo_depth.full - tolerable_latency.full;
+ tolerable_latency.full = rfixed_mul(tolerable_latency, chunk_time);
+ tolerable_latency.full = line_time.full - tolerable_latency.full;
+ }
+ /* We assume worst case 32bits (4 bytes) */
+ wm->dbpp.full = rfixed_const(2 * 16);
+
+ /* Determine the maximum priority mark
+ * width = viewport width in pixels
+ */
+ a.full = rfixed_const(16);
+ wm->priority_mark_max.full = rfixed_const(crtc->base.mode.crtc_hdisplay);
+ wm->priority_mark_max.full = rfixed_div(wm->priority_mark_max, a);
+
+ /* Determine estimated width */
+ estimated_width.full = tolerable_latency.full - wm->worst_case_latency.full;
+ estimated_width.full = rfixed_div(estimated_width, consumption_time);
+ if (rfixed_trunc(estimated_width) > crtc->base.mode.crtc_hdisplay) {
+ wm->priority_mark.full = rfixed_const(10);
+ } else {
+ a.full = rfixed_const(16);
+ wm->priority_mark.full = rfixed_div(estimated_width, a);
+ wm->priority_mark.full = wm->priority_mark_max.full - wm->priority_mark.full;
+ }
+}
+
+void rv515_bandwidth_avivo_update(struct radeon_device *rdev)
+{
+ struct drm_display_mode *mode0 = NULL;
+ struct drm_display_mode *mode1 = NULL;
+ struct rv515_watermark wm0;
+ struct rv515_watermark wm1;
+ u32 tmp;
+ fixed20_12 priority_mark02, priority_mark12, fill_rate;
+ fixed20_12 a, b;
+
+ if (rdev->mode_info.crtcs[0]->base.enabled)
+ mode0 = &rdev->mode_info.crtcs[0]->base.mode;
+ if (rdev->mode_info.crtcs[1]->base.enabled)
+ mode1 = &rdev->mode_info.crtcs[1]->base.mode;
+ rs690_line_buffer_adjust(rdev, mode0, mode1);
+
+ rv515_crtc_bandwidth_compute(rdev, rdev->mode_info.crtcs[0], &wm0);
+ rv515_crtc_bandwidth_compute(rdev, rdev->mode_info.crtcs[1], &wm1);
+
+ tmp = wm0.lb_request_fifo_depth;
+ tmp |= wm1.lb_request_fifo_depth << 16;
+ WREG32(LB_MAX_REQ_OUTSTANDING, tmp);
+
+ if (mode0 && mode1) {
+ if (rfixed_trunc(wm0.dbpp) > 64)
+ a.full = rfixed_div(wm0.dbpp, wm0.num_line_pair);
+ else
+ a.full = wm0.num_line_pair.full;
+ if (rfixed_trunc(wm1.dbpp) > 64)
+ b.full = rfixed_div(wm1.dbpp, wm1.num_line_pair);
+ else
+ b.full = wm1.num_line_pair.full;
+ a.full += b.full;
+ fill_rate.full = rfixed_div(wm0.sclk, a);
+ if (wm0.consumption_rate.full > fill_rate.full) {
+ b.full = wm0.consumption_rate.full - fill_rate.full;
+ b.full = rfixed_mul(b, wm0.active_time);
+ a.full = rfixed_const(16);
+ b.full = rfixed_div(b, a);
+ a.full = rfixed_mul(wm0.worst_case_latency,
+ wm0.consumption_rate);
+ priority_mark02.full = a.full + b.full;
+ } else {
+ a.full = rfixed_mul(wm0.worst_case_latency,
+ wm0.consumption_rate);
+ b.full = rfixed_const(16 * 1000);
+ priority_mark02.full = rfixed_div(a, b);
+ }
+ if (wm1.consumption_rate.full > fill_rate.full) {
+ b.full = wm1.consumption_rate.full - fill_rate.full;
+ b.full = rfixed_mul(b, wm1.active_time);
+ a.full = rfixed_const(16);
+ b.full = rfixed_div(b, a);
+ a.full = rfixed_mul(wm1.worst_case_latency,
+ wm1.consumption_rate);
+ priority_mark12.full = a.full + b.full;
+ } else {
+ a.full = rfixed_mul(wm1.worst_case_latency,
+ wm1.consumption_rate);
+ b.full = rfixed_const(16 * 1000);
+ priority_mark12.full = rfixed_div(a, b);
+ }
+ if (wm0.priority_mark.full > priority_mark02.full)
+ priority_mark02.full = wm0.priority_mark.full;
+ if (rfixed_trunc(priority_mark02) < 0)
+ priority_mark02.full = 0;
+ if (wm0.priority_mark_max.full > priority_mark02.full)
+ priority_mark02.full = wm0.priority_mark_max.full;
+ if (wm1.priority_mark.full > priority_mark12.full)
+ priority_mark12.full = wm1.priority_mark.full;
+ if (rfixed_trunc(priority_mark12) < 0)
+ priority_mark12.full = 0;
+ if (wm1.priority_mark_max.full > priority_mark12.full)
+ priority_mark12.full = wm1.priority_mark_max.full;
+ WREG32(D1MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark02));
+ WREG32(D1MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark02));
+ WREG32(D2MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark12));
+ WREG32(D2MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark12));
+ } else if (mode0) {
+ if (rfixed_trunc(wm0.dbpp) > 64)
+ a.full = rfixed_div(wm0.dbpp, wm0.num_line_pair);
+ else
+ a.full = wm0.num_line_pair.full;
+ fill_rate.full = rfixed_div(wm0.sclk, a);
+ if (wm0.consumption_rate.full > fill_rate.full) {
+ b.full = wm0.consumption_rate.full - fill_rate.full;
+ b.full = rfixed_mul(b, wm0.active_time);
+ a.full = rfixed_const(16);
+ b.full = rfixed_div(b, a);
+ a.full = rfixed_mul(wm0.worst_case_latency,
+ wm0.consumption_rate);
+ priority_mark02.full = a.full + b.full;
+ } else {
+ a.full = rfixed_mul(wm0.worst_case_latency,
+ wm0.consumption_rate);
+ b.full = rfixed_const(16);
+ priority_mark02.full = rfixed_div(a, b);
+ }
+ if (wm0.priority_mark.full > priority_mark02.full)
+ priority_mark02.full = wm0.priority_mark.full;
+ if (rfixed_trunc(priority_mark02) < 0)
+ priority_mark02.full = 0;
+ if (wm0.priority_mark_max.full > priority_mark02.full)
+ priority_mark02.full = wm0.priority_mark_max.full;
+ WREG32(D1MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark02));
+ WREG32(D1MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark02));
+ WREG32(D2MODE_PRIORITY_A_CNT, MODE_PRIORITY_OFF);
+ WREG32(D2MODE_PRIORITY_B_CNT, MODE_PRIORITY_OFF);
+ } else {
+ if (rfixed_trunc(wm1.dbpp) > 64)
+ a.full = rfixed_div(wm1.dbpp, wm1.num_line_pair);
+ else
+ a.full = wm1.num_line_pair.full;
+ fill_rate.full = rfixed_div(wm1.sclk, a);
+ if (wm1.consumption_rate.full > fill_rate.full) {
+ b.full = wm1.consumption_rate.full - fill_rate.full;
+ b.full = rfixed_mul(b, wm1.active_time);
+ a.full = rfixed_const(16);
+ b.full = rfixed_div(b, a);
+ a.full = rfixed_mul(wm1.worst_case_latency,
+ wm1.consumption_rate);
+ priority_mark12.full = a.full + b.full;
+ } else {
+ a.full = rfixed_mul(wm1.worst_case_latency,
+ wm1.consumption_rate);
+ b.full = rfixed_const(16 * 1000);
+ priority_mark12.full = rfixed_div(a, b);
+ }
+ if (wm1.priority_mark.full > priority_mark12.full)
+ priority_mark12.full = wm1.priority_mark.full;
+ if (rfixed_trunc(priority_mark12) < 0)
+ priority_mark12.full = 0;
+ if (wm1.priority_mark_max.full > priority_mark12.full)
+ priority_mark12.full = wm1.priority_mark_max.full;
+ WREG32(D1MODE_PRIORITY_A_CNT, MODE_PRIORITY_OFF);
+ WREG32(D1MODE_PRIORITY_B_CNT, MODE_PRIORITY_OFF);
+ WREG32(D2MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark12));
+ WREG32(D2MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark12));
+ }
+}
+
+void rv515_bandwidth_update(struct radeon_device *rdev)
+{
+ uint32_t tmp;
+ struct drm_display_mode *mode0 = NULL;
+ struct drm_display_mode *mode1 = NULL;
+
+ if (rdev->mode_info.crtcs[0]->base.enabled)
+ mode0 = &rdev->mode_info.crtcs[0]->base.mode;
+ if (rdev->mode_info.crtcs[1]->base.enabled)
+ mode1 = &rdev->mode_info.crtcs[1]->base.mode;
+ /*
+ * Set display0/1 priority up in the memory controller for
+ * modes if the user specifies HIGH for displaypriority
+ * option.
+ */
+ if (rdev->disp_priority == 2) {
+ tmp = RREG32_MC(MC_MISC_LAT_TIMER);
+ tmp &= ~MC_DISP1R_INIT_LAT_MASK;
+ tmp &= ~MC_DISP0R_INIT_LAT_MASK;
+ if (mode1)
+ tmp |= (1 << MC_DISP1R_INIT_LAT_SHIFT);
+ if (mode0)
+ tmp |= (1 << MC_DISP0R_INIT_LAT_SHIFT);
+ WREG32_MC(MC_MISC_LAT_TIMER, tmp);
+ }
+ rv515_bandwidth_avivo_update(rdev);
+}
--- /dev/null
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ * Alex Deucher
+ * Jerome Glisse
+ */
+#ifndef RV515R_H
+#define RV515R_H
+
+/* RV515 registers */
+#define PCIE_INDEX 0x0030
+#define PCIE_DATA 0x0034
+#define MC_IND_INDEX 0x0070
+#define MC_IND_WR_EN (1 << 24)
+#define MC_IND_DATA 0x0074
+#define RBBM_SOFT_RESET 0x00F0
+#define CONFIG_MEMSIZE 0x00F8
+#define HDP_FB_LOCATION 0x0134
+#define CP_CSQ_CNTL 0x0740
+#define CP_CSQ_MODE 0x0744
+#define CP_CSQ_ADDR 0x07F0
+#define CP_CSQ_DATA 0x07F4
+#define CP_CSQ_STAT 0x07F8
+#define CP_CSQ2_STAT 0x07FC
+#define RBBM_STATUS 0x0E40
+#define DST_PIPE_CONFIG 0x170C
+#define WAIT_UNTIL 0x1720
+#define WAIT_2D_IDLE (1 << 14)
+#define WAIT_3D_IDLE (1 << 15)
+#define WAIT_2D_IDLECLEAN (1 << 16)
+#define WAIT_3D_IDLECLEAN (1 << 17)
+#define ISYNC_CNTL 0x1724
+#define ISYNC_ANY2D_IDLE3D (1 << 0)
+#define ISYNC_ANY3D_IDLE2D (1 << 1)
+#define ISYNC_TRIG2D_IDLE3D (1 << 2)
+#define ISYNC_TRIG3D_IDLE2D (1 << 3)
+#define ISYNC_WAIT_IDLEGUI (1 << 4)
+#define ISYNC_CPSCRATCH_IDLEGUI (1 << 5)
+#define VAP_INDEX_OFFSET 0x208C
+#define VAP_PVS_STATE_FLUSH_REG 0x2284
+#define GB_ENABLE 0x4008
+#define GB_MSPOS0 0x4010
+#define MS_X0_SHIFT 0
+#define MS_Y0_SHIFT 4
+#define MS_X1_SHIFT 8
+#define MS_Y1_SHIFT 12
+#define MS_X2_SHIFT 16
+#define MS_Y2_SHIFT 20
+#define MSBD0_Y_SHIFT 24
+#define MSBD0_X_SHIFT 28
+#define GB_MSPOS1 0x4014
+#define MS_X3_SHIFT 0
+#define MS_Y3_SHIFT 4
+#define MS_X4_SHIFT 8
+#define MS_Y4_SHIFT 12
+#define MS_X5_SHIFT 16
+#define MS_Y5_SHIFT 20
+#define MSBD1_SHIFT 24
+#define GB_TILE_CONFIG 0x4018
+#define ENABLE_TILING (1 << 0)
+#define PIPE_COUNT_MASK 0x0000000E
+#define PIPE_COUNT_SHIFT 1
+#define TILE_SIZE_8 (0 << 4)
+#define TILE_SIZE_16 (1 << 4)
+#define TILE_SIZE_32 (2 << 4)
+#define SUBPIXEL_1_12 (0 << 16)
+#define SUBPIXEL_1_16 (1 << 16)
+#define GB_SELECT 0x401C
+#define GB_AA_CONFIG 0x4020
+#define GB_PIPE_SELECT 0x402C
+#define GA_ENHANCE 0x4274
+#define GA_DEADLOCK_CNTL (1 << 0)
+#define GA_FASTSYNC_CNTL (1 << 1)
+#define GA_POLY_MODE 0x4288
+#define FRONT_PTYPE_POINT (0 << 4)
+#define FRONT_PTYPE_LINE (1 << 4)
+#define FRONT_PTYPE_TRIANGE (2 << 4)
+#define BACK_PTYPE_POINT (0 << 7)
+#define BACK_PTYPE_LINE (1 << 7)
+#define BACK_PTYPE_TRIANGE (2 << 7)
+#define GA_ROUND_MODE 0x428C
+#define GEOMETRY_ROUND_TRUNC (0 << 0)
+#define GEOMETRY_ROUND_NEAREST (1 << 0)
+#define COLOR_ROUND_TRUNC (0 << 2)
+#define COLOR_ROUND_NEAREST (1 << 2)
+#define SU_REG_DEST 0x42C8
+#define RB3D_DSTCACHE_CTLSTAT 0x4E4C
+#define RB3D_DC_FLUSH (2 << 0)
+#define RB3D_DC_FREE (2 << 2)
+#define RB3D_DC_FINISH (1 << 4)
+#define ZB_ZCACHE_CTLSTAT 0x4F18
+#define ZC_FLUSH (1 << 0)
+#define ZC_FREE (1 << 1)
+#define DC_LB_MEMORY_SPLIT 0x6520
+#define DC_LB_MEMORY_SPLIT_MASK 0x00000003
+#define DC_LB_MEMORY_SPLIT_SHIFT 0
+#define DC_LB_MEMORY_SPLIT_D1HALF_D2HALF 0
+#define DC_LB_MEMORY_SPLIT_D1_3Q_D2_1Q 1
+#define DC_LB_MEMORY_SPLIT_D1_ONLY 2
+#define DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q 3
+#define DC_LB_MEMORY_SPLIT_SHIFT_MODE (1 << 2)
+#define DC_LB_DISP1_END_ADR_SHIFT 4
+#define DC_LB_DISP1_END_ADR_MASK 0x00007FF0
+#define D1MODE_PRIORITY_A_CNT 0x6548
+#define MODE_PRIORITY_MARK_MASK 0x00007FFF
+#define MODE_PRIORITY_OFF (1 << 16)
+#define MODE_PRIORITY_ALWAYS_ON (1 << 20)
+#define MODE_PRIORITY_FORCE_MASK (1 << 24)
+#define D1MODE_PRIORITY_B_CNT 0x654C
+#define LB_MAX_REQ_OUTSTANDING 0x6D58
+#define LB_D1_MAX_REQ_OUTSTANDING_MASK 0x0000000F
+#define LB_D1_MAX_REQ_OUTSTANDING_SHIFT 0
+#define LB_D2_MAX_REQ_OUTSTANDING_MASK 0x000F0000
+#define LB_D2_MAX_REQ_OUTSTANDING_SHIFT 16
+#define D2MODE_PRIORITY_A_CNT 0x6D48
+#define D2MODE_PRIORITY_B_CNT 0x6D4C
+
+/* ix[MC] registers */
+#define MC_FB_LOCATION 0x01
+#define MC_FB_START_MASK 0x0000FFFF
+#define MC_FB_START_SHIFT 0
+#define MC_FB_TOP_MASK 0xFFFF0000
+#define MC_FB_TOP_SHIFT 16
+#define MC_AGP_LOCATION 0x02
+#define MC_AGP_START_MASK 0x0000FFFF
+#define MC_AGP_START_SHIFT 0
+#define MC_AGP_TOP_MASK 0xFFFF0000
+#define MC_AGP_TOP_SHIFT 16
+#define MC_AGP_BASE 0x03
+#define MC_AGP_BASE_2 0x04
+#define MC_CNTL 0x5
+#define MEM_NUM_CHANNELS_MASK 0x00000003
+#define MC_STATUS 0x08
+#define MC_STATUS_IDLE (1 << 4)
+#define MC_MISC_LAT_TIMER 0x09
+#define MC_CPR_INIT_LAT_MASK 0x0000000F
+#define MC_VF_INIT_LAT_MASK 0x000000F0
+#define MC_DISP0R_INIT_LAT_MASK 0x00000F00
+#define MC_DISP0R_INIT_LAT_SHIFT 8
+#define MC_DISP1R_INIT_LAT_MASK 0x0000F000
+#define MC_DISP1R_INIT_LAT_SHIFT 12
+#define MC_FIXED_INIT_LAT_MASK 0x000F0000
+#define MC_E2R_INIT_LAT_MASK 0x00F00000
+#define SAME_PAGE_PRIO_MASK 0x0F000000
+#define MC_GLOBW_INIT_LAT_MASK 0xF0000000
+
+
+#endif
+
"programming pipes. Bad things might happen.\n");
}
- tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+ tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
tmp = REG_SET(R700_MC_FB_TOP, tmp >> 24);
tmp |= REG_SET(R700_MC_FB_BASE, rdev->mc.vram_location >> 24);
WREG32(R700_MC_VM_FB_LOCATION, tmp);
#define TTM_BO_HASH_ORDER 13
static int ttm_bo_setup_vm(struct ttm_buffer_object *bo);
-static void ttm_bo_unmap_virtual(struct ttm_buffer_object *bo);
static int ttm_bo_swapout(struct ttm_mem_shrink *shrink);
static inline uint32_t ttm_bo_type_flags(unsigned type)
TTM_ASSERT_LOCKED(&bo->mutex);
bo->ttm = NULL;
+ if (bdev->need_dma32)
+ page_flags |= TTM_PAGE_FLAG_DMA32;
+
switch (bo->type) {
case ttm_bo_type_device:
if (zero_alloc)
}
+ if (bdev->driver->move_notify)
+ bdev->driver->move_notify(bo, mem);
+
if (!(old_man->flags & TTM_MEMTYPE_FLAG_FIXED) &&
!(new_man->flags & TTM_MEMTYPE_FLAG_FIXED))
ret = ttm_bo_move_ttm(bo, evict, no_wait, mem);
return 0;
}
+static uint32_t ttm_bo_select_caching(struct ttm_mem_type_manager *man,
+ uint32_t cur_placement,
+ uint32_t proposed_placement)
+{
+ uint32_t caching = proposed_placement & TTM_PL_MASK_CACHING;
+ uint32_t result = proposed_placement & ~TTM_PL_MASK_CACHING;
+
+ /**
+ * Keep current caching if possible.
+ */
+
+ if ((cur_placement & caching) != 0)
+ result |= (cur_placement & caching);
+ else if ((man->default_caching & caching) != 0)
+ result |= man->default_caching;
+ else if ((TTM_PL_FLAG_CACHED & caching) != 0)
+ result |= TTM_PL_FLAG_CACHED;
+ else if ((TTM_PL_FLAG_WC & caching) != 0)
+ result |= TTM_PL_FLAG_WC;
+ else if ((TTM_PL_FLAG_UNCACHED & caching) != 0)
+ result |= TTM_PL_FLAG_UNCACHED;
+
+ return result;
+}
+
+
static bool ttm_bo_mt_compatible(struct ttm_mem_type_manager *man,
bool disallow_fixed,
uint32_t mem_type,
- uint32_t mask, uint32_t *res_mask)
+ uint32_t proposed_placement,
+ uint32_t *masked_placement)
{
uint32_t cur_flags = ttm_bo_type_flags(mem_type);
if ((man->flags & TTM_MEMTYPE_FLAG_FIXED) && disallow_fixed)
return false;
- if ((cur_flags & mask & TTM_PL_MASK_MEM) == 0)
+ if ((cur_flags & proposed_placement & TTM_PL_MASK_MEM) == 0)
return false;
- if ((mask & man->available_caching) == 0)
+ if ((proposed_placement & man->available_caching) == 0)
return false;
- if (mask & man->default_caching)
- cur_flags |= man->default_caching;
- else if (mask & TTM_PL_FLAG_CACHED)
- cur_flags |= TTM_PL_FLAG_CACHED;
- else if (mask & TTM_PL_FLAG_WC)
- cur_flags |= TTM_PL_FLAG_WC;
- else
- cur_flags |= TTM_PL_FLAG_UNCACHED;
- *res_mask = cur_flags;
+ cur_flags |= (proposed_placement & man->available_caching);
+
+ *masked_placement = cur_flags;
return true;
}
if (!type_ok)
continue;
+ cur_flags = ttm_bo_select_caching(man, bo->mem.placement,
+ cur_flags);
+
if (mem_type == TTM_PL_SYSTEM)
break;
proposed_placement, &cur_flags))
continue;
+ cur_flags = ttm_bo_select_caching(man, bo->mem.placement,
+ cur_flags);
+
ret = ttm_bo_mem_force_space(bdev, mem, mem_type,
interruptible, no_wait);
int ttm_bo_clean_mm(struct ttm_bo_device *bdev, unsigned mem_type)
{
- struct ttm_mem_type_manager *man = &bdev->man[mem_type];
+ struct ttm_mem_type_manager *man;
int ret = -EINVAL;
if (mem_type >= TTM_NUM_MEM_TYPES) {
printk(KERN_ERR TTM_PFX "Illegal memory type %d\n", mem_type);
return ret;
}
+ man = &bdev->man[mem_type];
if (!man->has_type) {
printk(KERN_ERR TTM_PFX "Trying to take down uninitialized "
int ttm_bo_device_init(struct ttm_bo_device *bdev,
struct ttm_mem_global *mem_glob,
- struct ttm_bo_driver *driver, uint64_t file_page_offset)
+ struct ttm_bo_driver *driver, uint64_t file_page_offset,
+ bool need_dma32)
{
int ret = -EINVAL;
INIT_LIST_HEAD(&bdev->ddestroy);
INIT_LIST_HEAD(&bdev->swap_lru);
bdev->dev_mapping = NULL;
+ bdev->need_dma32 = need_dma32;
ttm_mem_init_shrink(&bdev->shrink, ttm_bo_swapout);
ret = ttm_mem_register_shrink(mem_glob, &bdev->shrink);
if (unlikely(ret != 0)) {
unmap_mapping_range(bdev->dev_mapping, offset, holelen, 1);
}
+EXPORT_SYMBOL(ttm_bo_unmap_virtual);
static void ttm_bo_vm_insert_rb(struct ttm_buffer_object *bo)
{
driver->sync_obj_unref(&sync_obj);
driver->sync_obj_unref(&tmp_obj);
spin_lock(&bo->lock);
+ } else {
+ spin_unlock(&bo->lock);
+ driver->sync_obj_unref(&sync_obj);
+ spin_lock(&bo->lock);
}
}
return 0;
}
static int ttm_copy_io_ttm_page(struct ttm_tt *ttm, void *src,
- unsigned long page)
+ unsigned long page,
+ pgprot_t prot)
{
struct page *d = ttm_tt_get_page(ttm, page);
void *dst;
return -ENOMEM;
src = (void *)((unsigned long)src + (page << PAGE_SHIFT));
- dst = kmap(d);
+
+#ifdef CONFIG_X86
+ dst = kmap_atomic_prot(d, KM_USER0, prot);
+#else
+ if (pgprot_val(prot) != pgprot_val(PAGE_KERNEL))
+ dst = vmap(&d, 1, 0, prot);
+ else
+ dst = kmap(d);
+#endif
if (!dst)
return -ENOMEM;
memcpy_fromio(dst, src, PAGE_SIZE);
- kunmap(d);
+
+#ifdef CONFIG_X86
+ kunmap_atomic(dst, KM_USER0);
+#else
+ if (pgprot_val(prot) != pgprot_val(PAGE_KERNEL))
+ vunmap(dst);
+ else
+ kunmap(d);
+#endif
+
return 0;
}
static int ttm_copy_ttm_io_page(struct ttm_tt *ttm, void *dst,
- unsigned long page)
+ unsigned long page,
+ pgprot_t prot)
{
struct page *s = ttm_tt_get_page(ttm, page);
void *src;
return -ENOMEM;
dst = (void *)((unsigned long)dst + (page << PAGE_SHIFT));
- src = kmap(s);
+#ifdef CONFIG_X86
+ src = kmap_atomic_prot(s, KM_USER0, prot);
+#else
+ if (pgprot_val(prot) != pgprot_val(PAGE_KERNEL))
+ src = vmap(&s, 1, 0, prot);
+ else
+ src = kmap(s);
+#endif
if (!src)
return -ENOMEM;
memcpy_toio(dst, src, PAGE_SIZE);
- kunmap(s);
+
+#ifdef CONFIG_X86
+ kunmap_atomic(src, KM_USER0);
+#else
+ if (pgprot_val(prot) != pgprot_val(PAGE_KERNEL))
+ vunmap(src);
+ else
+ kunmap(s);
+#endif
+
return 0;
}
for (i = 0; i < new_mem->num_pages; ++i) {
page = i * dir + add;
- if (old_iomap == NULL)
- ret = ttm_copy_ttm_io_page(ttm, new_iomap, page);
- else if (new_iomap == NULL)
- ret = ttm_copy_io_ttm_page(ttm, old_iomap, page);
- else
+ if (old_iomap == NULL) {
+ pgprot_t prot = ttm_io_prot(old_mem->placement,
+ PAGE_KERNEL);
+ ret = ttm_copy_ttm_io_page(ttm, new_iomap, page,
+ prot);
+ } else if (new_iomap == NULL) {
+ pgprot_t prot = ttm_io_prot(new_mem->placement,
+ PAGE_KERNEL);
+ ret = ttm_copy_io_ttm_page(ttm, old_iomap, page,
+ prot);
+ } else
ret = ttm_copy_io_page(new_iomap, old_iomap, page);
if (ret)
goto out1;
if (evict) {
ret = ttm_bo_wait(bo, false, false, false);
spin_unlock(&bo->lock);
- driver->sync_obj_unref(&bo->sync_obj);
-
+ if (tmp_obj)
+ driver->sync_obj_unref(&tmp_obj);
if (ret)
return ret;
set_bit(TTM_BO_PRIV_FLAG_MOVING, &bo->priv_flags);
spin_unlock(&bo->lock);
+ if (tmp_obj)
+ driver->sync_obj_unref(&tmp_obj);
ret = ttm_buffer_object_transfer(bo, &ghost_obj);
if (ret)
return VM_FAULT_NOPAGE;
}
+ if (bdev->driver->fault_reserve_notify)
+ bdev->driver->fault_reserve_notify(bo);
+
/*
* Wait for buffer data in transit, due to a pipelined
* move.
goto out_unref;
kmap_offset = dev_offset - bo->vm_node->start;
- if (unlikely(kmap_offset) >= bo->num_pages) {
+ if (unlikely(kmap_offset >= bo->num_pages)) {
ret = -EFBIG;
goto out_unref;
}
bool dummy;
kmap_offset = (*f_pos >> PAGE_SHIFT);
- if (unlikely(kmap_offset) >= bo->num_pages)
+ if (unlikely(kmap_offset >= bo->num_pages))
return -EFBIG;
page_offset = *f_pos & ~PAGE_MASK;
unsigned long i;
for (i = 0; i < num_pages; ++i) {
- if (pages[i]) {
- unsigned long start = (unsigned long)page_address(pages[i]);
- flush_dcache_range(start, start + PAGE_SIZE);
- }
+ struct page *page = pages[i];
+ void *page_virtual;
+
+ if (unlikely(page == NULL))
+ continue;
+
+ page_virtual = kmap_atomic(page, KM_USER0);
+ flush_dcache_range((unsigned long) page_virtual,
+ (unsigned long) page_virtual + PAGE_SIZE);
+ kunmap_atomic(page_virtual, KM_USER0);
}
#else
if (on_each_cpu(ttm_tt_ipi_handler, NULL, 1) != 0)
static struct page *ttm_tt_alloc_page(unsigned page_flags)
{
+ gfp_t gfp_flags = GFP_USER;
+
if (page_flags & TTM_PAGE_FLAG_ZERO_ALLOC)
- return alloc_page(GFP_HIGHUSER | __GFP_ZERO);
+ gfp_flags |= __GFP_ZERO;
+
+ if (page_flags & TTM_PAGE_FLAG_DMA32)
+ gfp_flags |= __GFP_DMA32;
+ else
+ gfp_flags |= __GFP_HIGHMEM;
- return alloc_page(GFP_HIGHUSER);
+ return alloc_page(gfp_flags);
}
static void ttm_tt_free_user_pages(struct ttm_tt *ttm)
}
status = VIA_READ(VIA_REG_INTERRUPT);
- VIA_WRITE(VIA_REG_INTERRUPT, status & VIA_IRQ_VBLANK_ENABLE);
+ VIA_WRITE(VIA_REG_INTERRUPT, status | VIA_IRQ_VBLANK_ENABLE);
VIA_WRITE8(0x83d4, 0x11);
VIA_WRITE8(0x83d5, VIA_READ8(0x83d5) | 0x30);
void via_disable_vblank(struct drm_device *dev, int crtc)
{
drm_via_private_t *dev_priv = dev->dev_private;
+ u32 status;
+
+ status = VIA_READ(VIA_REG_INTERRUPT);
+ VIA_WRITE(VIA_REG_INTERRUPT, status & ~VIA_IRQ_VBLANK_ENABLE);
VIA_WRITE8(0x83d4, 0x11);
VIA_WRITE8(0x83d5, VIA_READ8(0x83d5) & ~0x30);
*/
int hid_input_report(struct hid_device *hid, int type, u8 *data, int size, int interrupt)
{
- struct hid_report_enum *report_enum = hid->report_enum + type;
- struct hid_driver *hdrv = hid->driver;
+ struct hid_report_enum *report_enum;
+ struct hid_driver *hdrv;
struct hid_report *report;
unsigned int i;
int ret;
if (!hid || !hid->driver)
return -ENODEV;
+ report_enum = hid->report_enum + type;
+ hdrv = hid->driver;
if (!size) {
dbg_hid("empty report\n");
goto goodreturn;
case HIDIOCGCOLLECTIONINDEX:
+ i = field->usage[uref->usage_index].collection_index;
+ unlock_kernel();
kfree(uref_multi);
- return field->usage[uref->usage_index].collection_index;
+ return i;
case HIDIOCGUSAGES:
for (i = 0; i < uref_multi->num_values; i++)
uref_multi->values[i] =
sensor->data = data;
sensor->id = flags->integer.value;
sensor->limit1 = limit1->integer.value;
- sensor->limit2 = limit2->integer.value;
+ if (data->old_interface)
+ sensor->limit2 = limit2->integer.value;
+ else
+ /* The upper limit is expressed as delta from lower limit */
+ sensor->limit2 = sensor->limit1 + limit2->integer.value;
snprintf(sensor->input_attr_name, ATTR_NAME_SIZE,
"%s%d_input", base_name, start + *num);
#define SUPERIO_REG_ACT 0x30
#define SUPERIO_REG_BASE 0x60
#define SUPERIO_REG_DEVID 0x20
+#define SUPERIO_REG_DEVREV 0x21
/* Logical device registers */
* The LPC47M292 (device id 0x6B) is somewhat compatible, but it
* supports a 3rd fan, and the pin configuration registers are
* unfortunately different.
+ * The LPC47M233 has the same device id (0x6B) but is not compatible.
+ * We check the high bit of the device revision register to
+ * differentiate them.
*/
switch (val) {
case 0x51:
sio_data->type = smsc47m1;
break;
case 0x6B:
+ if (superio_inb(SUPERIO_REG_DEVREV) & 0x80) {
+ pr_debug(DRVNAME ": "
+ "Found SMSC LPC47M233, unsupported\n");
+ superio_exit();
+ return -ENODEV;
+ }
+
pr_info(DRVNAME ": Found SMSC LPC47M292\n");
sio_data->type = smsc47m2;
break;
davinci_i2c_write_reg(dev, DAVINCI_I2C_CLKH_REG, clkh);
davinci_i2c_write_reg(dev, DAVINCI_I2C_CLKL_REG, clkl);
+ /* Respond at reserved "SMBus Host" slave address" (and zero);
+ * we seem to have no option to not respond...
+ */
+ davinci_i2c_write_reg(dev, DAVINCI_I2C_OAR_REG, 0x08);
+
dev_dbg(dev->dev, "input_clock = %d, CLK = %d\n", input_clock, clk);
dev_dbg(dev->dev, "PSC = %d\n",
davinci_i2c_read_reg(dev, DAVINCI_I2C_PSC_REG));
davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w);
if (!dev->terminate)
- dev_err(dev->dev, "TDR IRQ while no data to send\n");
+ dev_dbg(dev->dev, "TDR IRQ while no data to send\n");
}
/*
break;
case DAVINCI_I2C_IVR_AAS:
- dev_warn(dev->dev, "Address as slave interrupt\n");
- }/* switch */
- }/* while */
+ dev_dbg(dev->dev, "Address as slave interrupt\n");
+ break;
+
+ default:
+ dev_warn(dev->dev, "Unrecognized irq stat %d\n", stat);
+ break;
+ }
+ }
return count ? IRQ_HANDLED : IRQ_NONE;
}
return -ENODEV;
}
- ioarea = request_mem_region(mem->start, (mem->end - mem->start) + 1,
+ ioarea = request_mem_region(mem->start, resource_size(mem),
pdev->name);
if (!ioarea) {
dev_err(&pdev->dev, "I2C region already claimed\n");
dev->irq = irq->start;
platform_set_drvdata(pdev, dev);
- dev->clk = clk_get(&pdev->dev, "I2CCLK");
+ dev->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(dev->clk)) {
r = -ENODEV;
goto err_free_mem;
put_device(&pdev->dev);
kfree(dev);
err_release_region:
- release_mem_region(mem->start, (mem->end - mem->start) + 1);
+ release_mem_region(mem->start, resource_size(mem));
return r;
}
kfree(dev);
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(mem->start, (mem->end - mem->start) + 1);
+ release_mem_region(mem->start, resource_size(mem));
return 0;
}
break;
}
- omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat);
-
err = 0;
+complete:
+ /*
+ * Ack the stat in one go, but [R/X]DR and [R/X]RDY should be
+ * acked after the data operation is complete.
+ * Ref: TRM SWPU114Q Figure 18-31
+ */
+ omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat &
+ ~(OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR |
+ OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR));
+
if (stat & OMAP_I2C_STAT_NACK) {
err |= OMAP_I2C_STAT_NACK;
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG,
err |= OMAP_I2C_STAT_AL;
}
if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK |
- OMAP_I2C_STAT_AL))
+ OMAP_I2C_STAT_AL)) {
+ omap_i2c_ack_stat(dev, stat &
+ (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR |
+ OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR));
omap_i2c_complete_cmd(dev, err);
+ return IRQ_HANDLED;
+ }
if (stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR)) {
u8 num_bytes = 1;
if (dev->fifo_size) {
if (stat & OMAP_I2C_STAT_RRDY)
num_bytes = dev->fifo_size;
- else
- num_bytes = omap_i2c_read_reg(dev,
- OMAP_I2C_BUFSTAT_REG);
+ else /* read RXSTAT on RDR interrupt */
+ num_bytes = (omap_i2c_read_reg(dev,
+ OMAP_I2C_BUFSTAT_REG)
+ >> 8) & 0x3F;
}
while (num_bytes) {
num_bytes--;
if (dev->fifo_size) {
if (stat & OMAP_I2C_STAT_XRDY)
num_bytes = dev->fifo_size;
- else
+ else /* read TXSTAT on XDR interrupt */
num_bytes = omap_i2c_read_reg(dev,
- OMAP_I2C_BUFSTAT_REG);
+ OMAP_I2C_BUFSTAT_REG)
+ & 0x3F;
}
while (num_bytes) {
num_bytes--;
"data to send\n");
break;
}
+
+ /*
+ * OMAP3430 Errata 1.153: When an XRDY/XDR
+ * is hit, wait for XUDF before writing data
+ * to DATA_REG. Otherwise some data bytes can
+ * be lost while transferring them from the
+ * memory to the I2C interface.
+ */
+
+ if (dev->rev <= OMAP_I2C_REV_ON_3430) {
+ while (!(stat & OMAP_I2C_STAT_XUDF)) {
+ if (stat & (OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) {
+ omap_i2c_ack_stat(dev, stat & (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR));
+ err |= OMAP_I2C_STAT_XUDF;
+ goto complete;
+ }
+ cpu_relax();
+ stat = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG);
+ }
+ }
+
omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w);
}
omap_i2c_ack_stat(dev,
return -ENODEV;
}
- ioarea = request_mem_region(mem->start, (mem->end - mem->start) + 1,
+ ioarea = request_mem_region(mem->start, resource_size(mem),
pdev->name);
if (!ioarea) {
dev_err(&pdev->dev, "I2C region already claimed\n");
i2c_set_adapdata(adap, dev);
adap->owner = THIS_MODULE;
adap->class = I2C_CLASS_HWMON;
- strncpy(adap->name, "OMAP I2C adapter", sizeof(adap->name));
+ strlcpy(adap->name, "OMAP I2C adapter", sizeof(adap->name));
adap->algo = &omap_i2c_algo;
adap->dev.parent = &pdev->dev;
platform_set_drvdata(pdev, NULL);
kfree(dev);
err_release_region:
- release_mem_region(mem->start, (mem->end - mem->start) + 1);
+ release_mem_region(mem->start, resource_size(mem));
return r;
}
iounmap(dev->base);
kfree(dev);
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(mem->start, (mem->end - mem->start) + 1);
+ release_mem_region(mem->start, resource_size(mem));
return 0;
}
dev_info(i2c->dev, "bus frequency set to %d KHz\n", freq);
dev_dbg(i2c->dev, "S3C2410_IICCON=0x%02lx\n", iicon);
- /* check for s3c2440 i2c controller */
-
- if (s3c24xx_i2c_is2440(i2c))
- writel(0x0, i2c->regs + S3C2440_IICLC);
-
return 0;
}
goto err_irq;
}
- size = (res->end - res->start) + 1;
+ size = resource_size(res);
pd->reg = ioremap(res->start, size);
if (pd->reg == NULL) {
platform_driver_unregister(&sh_mobile_i2c_driver);
}
-module_init(sh_mobile_i2c_adap_init);
+subsys_initcall(sh_mobile_i2c_adap_init);
module_exit(sh_mobile_i2c_adap_exit);
MODULE_DESCRIPTION("SuperH Mobile I2C Bus Controller driver");
goto err;
}
- size = (res->end-res->start)+1;
+ size = resource_size(res);
pd->ioarea = request_mem_region(res->start, size, dev->name);
if (pd->ioarea == NULL) {
STU300_ERROR_NONE = 0,
STU300_ERROR_ACKNOWLEDGE_FAILURE,
STU300_ERROR_BUS_ERROR,
- STU300_ERROR_ARBITRATION_LOST
+ STU300_ERROR_ARBITRATION_LOST,
+ STU300_ERROR_UNKNOWN
};
/* timeout waiting for the controller to respond */
* The number of address send athemps tried before giving up.
* If the first one failes it seems like 5 to 8 attempts are required.
*/
-#define NUM_ADDR_RESEND_ATTEMPTS 10
+#define NUM_ADDR_RESEND_ATTEMPTS 12
/* I2C clock speed, in Hz 0-400kHz*/
static unsigned int scl_frequency = 100000;
* @msg_index: index of current message
* @msg_len: length of current message
*/
+
struct stu300_dev {
struct platform_device *pdev;
struct i2c_adapter adapter;
return readl(address) & 0x000000FFU;
}
+static void stu300_irq_enable(struct stu300_dev *dev)
+{
+ u32 val;
+ val = stu300_r8(dev->virtbase + I2C_CR);
+ val |= I2C_CR_INTERRUPT_ENABLE;
+ /* Twice paranoia (possible HW glitch) */
+ stu300_wr8(val, dev->virtbase + I2C_CR);
+ stu300_wr8(val, dev->virtbase + I2C_CR);
+}
+
+static void stu300_irq_disable(struct stu300_dev *dev)
+{
+ u32 val;
+ val = stu300_r8(dev->virtbase + I2C_CR);
+ val &= ~I2C_CR_INTERRUPT_ENABLE;
+ /* Twice paranoia (possible HW glitch) */
+ stu300_wr8(val, dev->virtbase + I2C_CR);
+ stu300_wr8(val, dev->virtbase + I2C_CR);
+}
+
+
/*
* Tells whether a certain event or events occurred in
* response to a command. The events represent states in
* documentation and can only be treated as abstract state
* machine states.
*
- * @ret 0 = event has not occurred, any other value means
- * the event occurred.
+ * @ret 0 = event has not occurred or unknown error, any
+ * other value means the correct event occurred or an error.
*/
+
static int stu300_event_occurred(struct stu300_dev *dev,
enum stu300_event mr_event) {
u32 status1;
/* What event happened? */
status1 = stu300_r8(dev->virtbase + I2C_SR1);
+
if (!(status1 & I2C_SR1_EVF_IND))
/* No event at all */
return 0;
+
status2 = stu300_r8(dev->virtbase + I2C_SR2);
+ /* Block any multiple interrupts */
+ stu300_irq_disable(dev);
+
+ /* Check for errors first */
+ if (status2 & I2C_SR2_AF_IND) {
+ dev->cmd_err = STU300_ERROR_ACKNOWLEDGE_FAILURE;
+ return 1;
+ } else if (status2 & I2C_SR2_BERR_IND) {
+ dev->cmd_err = STU300_ERROR_BUS_ERROR;
+ return 1;
+ } else if (status2 & I2C_SR2_ARLO_IND) {
+ dev->cmd_err = STU300_ERROR_ARBITRATION_LOST;
+ return 1;
+ }
+
switch (mr_event) {
case STU300_EVENT_1:
if (status1 & I2C_SR1_ADSL_IND)
case STU300_EVENT_7:
case STU300_EVENT_8:
if (status1 & I2C_SR1_BTF_IND) {
- if (status2 & I2C_SR2_AF_IND)
- dev->cmd_err = STU300_ERROR_ACKNOWLEDGE_FAILURE;
- else if (status2 & I2C_SR2_BERR_IND)
- dev->cmd_err = STU300_ERROR_BUS_ERROR;
return 1;
}
break;
case STU300_EVENT_6:
if (status2 & I2C_SR2_ENDAD_IND) {
/* First check for any errors */
- if (status2 & I2C_SR2_AF_IND)
- dev->cmd_err = STU300_ERROR_ACKNOWLEDGE_FAILURE;
return 1;
}
break;
default:
break;
}
- if (status2 & I2C_SR2_ARLO_IND)
- dev->cmd_err = STU300_ERROR_ARBITRATION_LOST;
+ /* If we get here, we're on thin ice.
+ * Here we are in a status where we have
+ * gotten a response that does not match
+ * what we requested.
+ */
+ dev->cmd_err = STU300_ERROR_UNKNOWN;
+ dev_err(&dev->pdev->dev,
+ "Unhandled interrupt! %d sr1: 0x%x sr2: 0x%x\n",
+ mr_event, status1, status2);
return 0;
}
struct stu300_dev *dev = data;
int res;
+ /* Just make sure that the block is clocked */
+ clk_enable(dev->clk);
+
/* See if this was what we were waiting for */
spin_lock(&dev->cmd_issue_lock);
- if (dev->cmd_event != STU300_EVENT_NONE) {
- res = stu300_event_occurred(dev, dev->cmd_event);
- if (res || dev->cmd_err != STU300_ERROR_NONE) {
- u32 val;
-
- complete(&dev->cmd_complete);
- /* Block any multiple interrupts */
- val = stu300_r8(dev->virtbase + I2C_CR);
- val &= ~I2C_CR_INTERRUPT_ENABLE;
- stu300_wr8(val, dev->virtbase + I2C_CR);
- }
- }
+
+ res = stu300_event_occurred(dev, dev->cmd_event);
+ if (res || dev->cmd_err != STU300_ERROR_NONE)
+ complete(&dev->cmd_complete);
+
spin_unlock(&dev->cmd_issue_lock);
+
+ clk_disable(dev->clk);
+
return IRQ_HANDLED;
}
stu300_wr8(cr_value, dev->virtbase + I2C_CR);
ret = wait_for_completion_interruptible_timeout(&dev->cmd_complete,
STU300_TIMEOUT);
-
if (ret < 0) {
dev_err(&dev->pdev->dev,
"wait_for_completion_interruptible_timeout() "
enum stu300_event mr_event)
{
int ret;
- u32 val;
if (unlikely(irqs_disabled())) {
/* TODO: implement polling for this case if need be. */
/* Is it already here? */
spin_lock_irq(&dev->cmd_issue_lock);
dev->cmd_err = STU300_ERROR_NONE;
- if (stu300_event_occurred(dev, mr_event)) {
- spin_unlock_irq(&dev->cmd_issue_lock);
- goto exit_await_check_err;
- }
- init_completion(&dev->cmd_complete);
- dev->cmd_err = STU300_ERROR_NONE;
dev->cmd_event = mr_event;
- /* Turn on the I2C interrupt for current operation */
- val = stu300_r8(dev->virtbase + I2C_CR);
- val |= I2C_CR_INTERRUPT_ENABLE;
- stu300_wr8(val, dev->virtbase + I2C_CR);
-
- /* Twice paranoia (possible HW glitch) */
- stu300_wr8(val, dev->virtbase + I2C_CR);
+ init_completion(&dev->cmd_complete);
- /* Check again: is it already here? */
- if (unlikely(stu300_event_occurred(dev, mr_event))) {
- /* Disable IRQ again. */
- val &= ~I2C_CR_INTERRUPT_ENABLE;
- stu300_wr8(val, dev->virtbase + I2C_CR);
- spin_unlock_irq(&dev->cmd_issue_lock);
- goto exit_await_check_err;
- }
+ /* Turn on the I2C interrupt for current operation */
+ stu300_irq_enable(dev);
/* Unlock the command block and wait for the event to occur */
spin_unlock_irq(&dev->cmd_issue_lock);
+
ret = wait_for_completion_interruptible_timeout(&dev->cmd_complete,
STU300_TIMEOUT);
-
if (ret < 0) {
dev_err(&dev->pdev->dev,
"wait_for_completion_interruptible_timeout()"
return -ETIMEDOUT;
}
- exit_await_check_err:
if (dev->cmd_err != STU300_ERROR_NONE) {
if (mr_event != STU300_EVENT_6) {
dev_err(&dev->pdev->dev, "controller "
};
static const struct stu300_clkset stu300_clktable[] = {
- { 0, 0xFFU },
- { 2500000, I2C_OAR2_FR_25_10MHZ },
- { 10000000, I2C_OAR2_FR_10_1667MHZ },
- { 16670000, I2C_OAR2_FR_1667_2667MHZ },
- { 26670000, I2C_OAR2_FR_2667_40MHZ },
- { 40000000, I2C_OAR2_FR_40_5333MHZ },
- { 53330000, I2C_OAR2_FR_5333_66MHZ },
- { 66000000, I2C_OAR2_FR_66_80MHZ },
- { 80000000, I2C_OAR2_FR_80_100MHZ },
+ { 0, 0xFFU },
+ { 2500000, I2C_OAR2_FR_25_10MHZ },
+ { 10000000, I2C_OAR2_FR_10_1667MHZ },
+ { 16670000, I2C_OAR2_FR_1667_2667MHZ },
+ { 26670000, I2C_OAR2_FR_2667_40MHZ },
+ { 40000000, I2C_OAR2_FR_40_5333MHZ },
+ { 53330000, I2C_OAR2_FR_5333_66MHZ },
+ { 66000000, I2C_OAR2_FR_66_80MHZ },
+ { 80000000, I2C_OAR2_FR_80_100MHZ },
{ 100000000, 0xFFU },
};
+
static int stu300_set_clk(struct stu300_dev *dev, unsigned long clkrate)
{
if (dev->speed > 100000)
/* Fast Mode I2C */
- val = ((clkrate/dev->speed)-9)/3;
+ val = ((clkrate/dev->speed) - 9)/3 + 1;
else
/* Standard Mode I2C */
- val = ((clkrate/dev->speed)-7)/2;
+ val = ((clkrate/dev->speed) - 7)/2 + 1;
/* According to spec the divider must be > 2 */
if (val < 0x002) {
*/
clkrate = clk_get_rate(dev->clk);
ret = stu300_set_clk(dev, clkrate);
+
if (ret)
return ret;
/*
int attempts = 0;
struct stu300_dev *dev = i2c_get_adapdata(adap);
-
clk_enable(dev->clk);
/* Remove this if (0) to trace each and every message. */
if (attempts < NUM_ADDR_RESEND_ATTEMPTS && attempts > 0) {
dev_dbg(&dev->pdev->dev, "managed to get address "
- "through after %d attempts\n", attempts);
+ "through after %d attempts\n", attempts);
} else if (attempts == NUM_ADDR_RESEND_ATTEMPTS) {
dev_dbg(&dev->pdev->dev, "I give up, tried %d times "
- "to resend address.\n",
- NUM_ADDR_RESEND_ATTEMPTS);
+ "to resend address.\n",
+ NUM_ADDR_RESEND_ATTEMPTS);
goto exit_disable;
}
+
if (msg->flags & I2C_M_RD) {
/* READ: we read the actual bytes one at a time */
for (i = 0; i < msg->len; i++) {
{
int ret = -1;
int i;
+
struct stu300_dev *dev = i2c_get_adapdata(adap);
dev->msg_len = num;
+
for (i = 0; i < num; i++) {
/*
* Another driver appears to send stop for each message,
dev->msg_index = i;
ret = stu300_xfer_msg(adap, &msgs[i], (i == (num - 1)));
+
if (ret != 0) {
num = ret;
break;
struct resource *res;
int bus_nr;
int ret = 0;
+ char clk_name[] = "I2C0";
dev = kzalloc(sizeof(struct stu300_dev), GFP_KERNEL);
if (!dev) {
}
bus_nr = pdev->id;
- dev->clk = clk_get(&pdev->dev, NULL);
+ clk_name[3] += (char)bus_nr;
+ dev->clk = clk_get(&pdev->dev, clk_name);
if (IS_ERR(dev->clk)) {
ret = PTR_ERR(dev->clk);
dev_err(&pdev->dev, "could not retrieve i2c bus clock\n");
#include <linux/delay.h>
#define TSL2550_DRV_NAME "tsl2550"
-#define DRIVER_VERSION "1.1.1"
+#define DRIVER_VERSION "1.1.2"
/*
* Defines
u8 r = 128;
/* Avoid division by 0 and count 1 cannot be greater than count 0 */
- if (c0 && (c1 <= c0))
- r = c1 * 128 / c0;
+ if (c1 <= c0)
+ if (c0) {
+ r = c1 * 128 / c0;
+
+ /* Calculate LUX */
+ lux = ((c0 - c1) * ratio_lut[r]) / 256;
+ } else
+ lux = 0;
else
- return -1;
-
- /* Calculate LUX */
- lux = ((c0 - c1) * ratio_lut[r]) / 256;
+ return -EAGAIN;
/* LUX range check */
return lux > TSL2550_MAX_LUX ? TSL2550_MAX_LUX : lux;
PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9),
PCMCIA_DEVICE_PROD_ID12("ARGOSY", "CD-ROM", 0x78f308dc, 0x66536591),
PCMCIA_DEVICE_PROD_ID12("ARGOSY", "PnPIDE", 0x78f308dc, 0x0c694728),
+ PCMCIA_DEVICE_PROD_ID12("CNF ", "CD-ROM", 0x46d7db81, 0x66536591),
PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591),
PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4),
PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde),
rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
rq->special = cmd;
+ cmd->rq = rq;
}
ide_devset_get(multcount, mult_count);
tape->best_dsc_rw_freq = config.dsc_rw_frequency;
break;
case 0x0350:
+ memset(&config, 0, sizeof(config));
config.dsc_rw_frequency = (int) tape->best_dsc_rw_freq;
config.nr_stages = 1;
if (copy_to_user(argp, &config, sizeof(config)))
* In either case, must tell the provider to reject.
*/
cm_id_priv->state = IW_CM_STATE_DESTROYING;
+ cm_id->device->iwcm->reject(cm_id, NULL, 0);
break;
case IW_CM_STATE_CONN_SENT:
case IW_CM_STATE_DESTROYING:
* Copyright (c) 2004-2007 Voltaire, Inc. All rights reserved.
* Copyright (c) 2005 Intel Corporation. All rights reserved.
* Copyright (c) 2005 Mellanox Technologies Ltd. All rights reserved.
+ * Copyright (c) 2009 HNR Consulting. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
MODULE_AUTHOR("Hal Rosenstock");
MODULE_AUTHOR("Sean Hefty");
+int mad_sendq_size = IB_MAD_QP_SEND_SIZE;
+int mad_recvq_size = IB_MAD_QP_RECV_SIZE;
+
+module_param_named(send_queue_size, mad_sendq_size, int, 0444);
+MODULE_PARM_DESC(send_queue_size, "Size of send queue in number of work requests");
+module_param_named(recv_queue_size, mad_recvq_size, int, 0444);
+MODULE_PARM_DESC(recv_queue_size, "Size of receive queue in number of work requests");
+
static struct kmem_cache *ib_mad_cache;
static struct list_head ib_mad_port_list;
static u32 ib_mad_client_id = 0;
/* Port list lock */
-static spinlock_t ib_mad_port_list_lock;
-
+static DEFINE_SPINLOCK(ib_mad_port_list_lock);
/* Forward declarations */
static int method_in_use(struct ib_mad_mgmt_method_table **method,
unsigned long delay;
if (list_empty(&mad_agent_priv->wait_list)) {
- cancel_delayed_work(&mad_agent_priv->timed_work);
+ __cancel_delayed_work(&mad_agent_priv->timed_work);
} else {
mad_send_wr = list_entry(mad_agent_priv->wait_list.next,
struct ib_mad_send_wr_private,
if (time_after(mad_agent_priv->timeout,
mad_send_wr->timeout)) {
mad_agent_priv->timeout = mad_send_wr->timeout;
- cancel_delayed_work(&mad_agent_priv->timed_work);
+ __cancel_delayed_work(&mad_agent_priv->timed_work);
delay = mad_send_wr->timeout - jiffies;
if ((long)delay <= 0)
delay = 1;
/* Reschedule a work item if we have a shorter timeout */
if (mad_agent_priv->wait_list.next == &mad_send_wr->agent_list) {
- cancel_delayed_work(&mad_agent_priv->timed_work);
+ __cancel_delayed_work(&mad_agent_priv->timed_work);
queue_delayed_work(mad_agent_priv->qp_info->port_priv->wq,
&mad_agent_priv->timed_work, delay);
}
qp_init_attr.send_cq = qp_info->port_priv->cq;
qp_init_attr.recv_cq = qp_info->port_priv->cq;
qp_init_attr.sq_sig_type = IB_SIGNAL_ALL_WR;
- qp_init_attr.cap.max_send_wr = IB_MAD_QP_SEND_SIZE;
- qp_init_attr.cap.max_recv_wr = IB_MAD_QP_RECV_SIZE;
+ qp_init_attr.cap.max_send_wr = mad_sendq_size;
+ qp_init_attr.cap.max_recv_wr = mad_recvq_size;
qp_init_attr.cap.max_send_sge = IB_MAD_SEND_REQ_MAX_SG;
qp_init_attr.cap.max_recv_sge = IB_MAD_RECV_REQ_MAX_SG;
qp_init_attr.qp_type = qp_type;
goto error;
}
/* Use minimum queue sizes unless the CQ is resized */
- qp_info->send_queue.max_active = IB_MAD_QP_SEND_SIZE;
- qp_info->recv_queue.max_active = IB_MAD_QP_RECV_SIZE;
+ qp_info->send_queue.max_active = mad_sendq_size;
+ qp_info->recv_queue.max_active = mad_recvq_size;
return 0;
error:
init_mad_qp(port_priv, &port_priv->qp_info[0]);
init_mad_qp(port_priv, &port_priv->qp_info[1]);
- cq_size = (IB_MAD_QP_SEND_SIZE + IB_MAD_QP_RECV_SIZE) * 2;
+ cq_size = (mad_sendq_size + mad_recvq_size) * 2;
port_priv->cq = ib_create_cq(port_priv->device,
ib_mad_thread_completion_handler,
NULL, port_priv, cq_size, 0);
{
int ret;
- spin_lock_init(&ib_mad_port_list_lock);
+ mad_recvq_size = min(mad_recvq_size, IB_MAD_QP_MAX_SIZE);
+ mad_recvq_size = max(mad_recvq_size, IB_MAD_QP_MIN_SIZE);
+
+ mad_sendq_size = min(mad_sendq_size, IB_MAD_QP_MAX_SIZE);
+ mad_sendq_size = max(mad_sendq_size, IB_MAD_QP_MIN_SIZE);
ib_mad_cache = kmem_cache_create("ib_mad",
sizeof(struct ib_mad_private),
module_init(ib_mad_init_module);
module_exit(ib_mad_cleanup_module);
-
* Copyright (c) 2004, 2005, Voltaire, Inc. All rights reserved.
* Copyright (c) 2005 Intel Corporation. All rights reserved.
* Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved.
+ * Copyright (c) 2009 HNR Consulting. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
/* QP and CQ parameters */
#define IB_MAD_QP_SEND_SIZE 128
#define IB_MAD_QP_RECV_SIZE 512
+#define IB_MAD_QP_MIN_SIZE 64
+#define IB_MAD_QP_MAX_SIZE 8192
#define IB_MAD_SEND_REQ_MAX_SG 2
#define IB_MAD_RECV_REQ_MAX_SG 1
struct ib_sa_query *query;
int query_id;
u16 pkey_index;
+ u8 leave_state;
+ int retries;
};
struct mcast_member {
rec = group->rec;
rec.join_state = leave_state;
+ group->leave_state = leave_state;
ret = ib_sa_mcmember_rec_query(&sa_client, port->dev->device,
port->port_num, IB_SA_METHOD_DELETE, &rec,
{
struct mcast_group *group = context;
- mcast_work_handler(&group->work);
+ if (status && group->retries > 0 &&
+ !send_leave(group, group->leave_state))
+ group->retries--;
+ else
+ mcast_work_handler(&group->work);
}
static struct mcast_group *acquire_group(struct mcast_port *port,
if (!group)
return NULL;
+ group->retries = 3;
group->port = port;
group->rec.mgid = *mgid;
group->pkey_index = MCAST_INVALID_PKEY_INDEX;
.remove = ib_sa_remove_one
};
-static spinlock_t idr_lock;
+static DEFINE_SPINLOCK(idr_lock);
static DEFINE_IDR(query_idr);
-static spinlock_t tid_lock;
+static DEFINE_SPINLOCK(tid_lock);
static u32 tid;
#define PATH_REC_FIELD(field) \
{
int ret;
- spin_lock_init(&idr_lock);
- spin_lock_init(&tid_lock);
-
get_random_bytes(&tid, sizeof tid);
ret = ib_register_client(&sa_client);
hop_cnt = smp->hop_cnt;
/* See section 14.2.2.2, Vol 1 IB spec */
+ /* C14-6 -- valid hop_cnt values are from 0 to 63 */
+ if (hop_cnt >= IB_SMP_MAX_PATH_HOPS)
+ return IB_SMI_DISCARD;
+
if (!ib_get_smp_direction(smp)) {
/* C14-9:1 */
if (hop_cnt && hop_ptr == 0) {
hop_cnt = smp->hop_cnt;
/* See section 14.2.2.2, Vol 1 IB spec */
+ /* C14-6 -- valid hop_cnt values are from 0 to 63 */
+ if (hop_cnt >= IB_SMP_MAX_PATH_HOPS)
+ return IB_SMI_DISCARD;
+
if (!ib_get_smp_direction(smp)) {
/* C14-9:1 -- sender should have incremented hop_ptr */
if (hop_cnt && hop_ptr == 0)
DEFINE_IDR(ib_uverbs_qp_idr);
DEFINE_IDR(ib_uverbs_srq_idr);
-static spinlock_t map_lock;
+static DEFINE_SPINLOCK(map_lock);
static struct ib_uverbs_device *dev_table[IB_UVERBS_MAX_DEVICES];
static DECLARE_BITMAP(dev_map, IB_UVERBS_MAX_DEVICES);
if (hdr.command < 0 ||
hdr.command >= ARRAY_SIZE(uverbs_cmd_table) ||
- !uverbs_cmd_table[hdr.command] ||
- !(file->device->ib_dev->uverbs_cmd_mask & (1ull << hdr.command)))
+ !uverbs_cmd_table[hdr.command])
return -EINVAL;
if (!file->ucontext &&
hdr.command != IB_USER_VERBS_CMD_GET_CONTEXT)
return -EINVAL;
+ if (!(file->device->ib_dev->uverbs_cmd_mask & (1ull << hdr.command)))
+ return -ENOSYS;
+
return uverbs_cmd_table[hdr.command](file, buf + sizeof hdr,
hdr.in_words * 4, hdr.out_words * 4);
}
{
int ret;
- spin_lock_init(&map_lock);
-
ret = register_chrdev_region(IB_UVERBS_BASE_DEV, IB_UVERBS_MAX_DEVICES,
"infiniband_verbs");
if (ret) {
static void c2_print_macaddr(struct net_device *netdev)
{
- pr_debug("%s: MAC %02X:%02X:%02X:%02X:%02X:%02X, "
- "IRQ %u\n", netdev->name,
- netdev->dev_addr[0], netdev->dev_addr[1], netdev->dev_addr[2],
- netdev->dev_addr[3], netdev->dev_addr[4], netdev->dev_addr[5],
- netdev->irq);
+ pr_debug("%s: MAC %pM, IRQ %u\n", netdev->name, netdev->dev_addr, netdev->irq);
}
static void c2_set_rxbufsize(struct c2_port *c2_port)
/* Register pseudo network device */
dev->pseudo_netdev = c2_pseudo_netdev_init(dev);
if (!dev->pseudo_netdev)
- goto out3;
+ goto out;
ret = register_netdev(dev->pseudo_netdev);
if (ret)
- goto out2;
+ goto out_free_netdev;
pr_debug("%s:%u\n", __func__, __LINE__);
strlcpy(dev->ibdev.name, "amso%d", IB_DEVICE_NAME_MAX);
dev->ibdev.post_recv = c2_post_receive;
dev->ibdev.iwcm = kmalloc(sizeof(*dev->ibdev.iwcm), GFP_KERNEL);
+ if (dev->ibdev.iwcm == NULL) {
+ ret = -ENOMEM;
+ goto out_unregister_netdev;
+ }
dev->ibdev.iwcm->add_ref = c2_add_ref;
dev->ibdev.iwcm->rem_ref = c2_rem_ref;
dev->ibdev.iwcm->get_qp = c2_get_qp;
ret = ib_register_device(&dev->ibdev);
if (ret)
- goto out1;
+ goto out_free_iwcm;
for (i = 0; i < ARRAY_SIZE(c2_dev_attributes); ++i) {
ret = device_create_file(&dev->ibdev.dev,
c2_dev_attributes[i]);
if (ret)
- goto out0;
+ goto out_unregister_ibdev;
}
- goto out3;
+ goto out;
-out0:
+out_unregister_ibdev:
ib_unregister_device(&dev->ibdev);
-out1:
+out_free_iwcm:
+ kfree(dev->ibdev.iwcm);
+out_unregister_netdev:
unregister_netdev(dev->pseudo_netdev);
-out2:
+out_free_netdev:
free_netdev(dev->pseudo_netdev);
-out3:
+out:
pr_debug("%s:%u ret=%d\n", __func__, __LINE__, ret);
return ret;
}
wqe->qpcaps = attr->qpcaps;
wqe->ulpdu_size = cpu_to_be16(attr->tcp_emss);
wqe->rqe_count = cpu_to_be16(attr->rqe_count);
- wqe->flags_rtr_type = cpu_to_be16(attr->flags|V_RTR_TYPE(attr->rtr_type));
+ wqe->flags_rtr_type = cpu_to_be16(attr->flags |
+ V_RTR_TYPE(attr->rtr_type) |
+ V_CHAN(attr->chan));
wqe->ord = cpu_to_be32(attr->ord);
wqe->ird = cpu_to_be32(attr->ird);
wqe->qp_dma_addr = cpu_to_be64(attr->qp_dma_addr);
err2:
cxio_hal_destroy_ctrl_qp(rdev_p);
err1:
+ rdev_p->t3cdev_p->ulp = NULL;
list_del(&rdev_p->entry);
return err;
}
#define V_RTR_TYPE(x) ((x) << S_RTR_TYPE)
#define G_RTR_TYPE(x) ((((x) >> S_RTR_TYPE)) & M_RTR_TYPE)
+#define S_CHAN 4
+#define M_CHAN 0x3
+#define V_CHAN(x) ((x) << S_CHAN)
+#define G_CHAN(x) ((((x) >> S_CHAN)) & M_CHAN)
+
struct t3_rdma_init_attr {
u32 tid;
u32 qpid;
u16 flags;
u16 rqe_count;
u32 irs;
+ u32 chan;
};
struct t3_rdma_init_wr {
static void open_rnic_dev(struct t3cdev *);
static void close_rnic_dev(struct t3cdev *);
-static void iwch_err_handler(struct t3cdev *, u32, u32);
+static void iwch_event_handler(struct t3cdev *, u32, u32);
struct cxgb3_client t3c_client = {
.name = "iw_cxgb3",
.remove = close_rnic_dev,
.handlers = t3c_handlers,
.redirect = iwch_ep_redirect,
- .err_handler = iwch_err_handler
+ .event_handler = iwch_event_handler
};
static LIST_HEAD(dev_list);
static void open_rnic_dev(struct t3cdev *tdev)
{
struct iwch_dev *rnicp;
- static int vers_printed;
PDBG("%s t3cdev %p\n", __func__, tdev);
- if (!vers_printed++)
- printk(KERN_INFO MOD "Chelsio T3 RDMA Driver - version %s\n",
+ printk_once(KERN_INFO MOD "Chelsio T3 RDMA Driver - version %s\n",
DRV_VERSION);
rnicp = (struct iwch_dev *)ib_alloc_device(sizeof(*rnicp));
if (!rnicp) {
mutex_unlock(&dev_mutex);
}
-static void iwch_err_handler(struct t3cdev *tdev, u32 status, u32 error)
+static void iwch_event_handler(struct t3cdev *tdev, u32 evt, u32 port_id)
{
struct cxio_rdev *rdev = tdev->ulp;
- struct iwch_dev *rnicp = rdev_to_iwch_dev(rdev);
+ struct iwch_dev *rnicp;
struct ib_event event;
+ u32 portnum = port_id + 1;
- if (status == OFFLOAD_STATUS_DOWN) {
+ if (!rdev)
+ return;
+ rnicp = rdev_to_iwch_dev(rdev);
+ switch (evt) {
+ case OFFLOAD_STATUS_DOWN: {
rdev->flags = CXIO_ERROR_FATAL;
-
- event.device = &rnicp->ibdev;
event.event = IB_EVENT_DEVICE_FATAL;
- event.element.port_num = 0;
- ib_dispatch_event(&event);
+ break;
+ }
+ case OFFLOAD_PORT_DOWN: {
+ event.event = IB_EVENT_PORT_ERR;
+ break;
+ }
+ case OFFLOAD_PORT_UP: {
+ event.event = IB_EVENT_PORT_ACTIVE;
+ break;
+ }
}
+ event.device = &rnicp->ibdev;
+ event.element.port_num = portnum;
+ ib_dispatch_event(&event);
+
return;
}
ep = container_of(container_of(kref, struct iwch_ep_common, kref),
struct iwch_ep, com);
PDBG("%s ep %p state %s\n", __func__, ep, states[state_read(&ep->com)]);
- if (ep->com.flags & RELEASE_RESOURCES) {
+ if (test_bit(RELEASE_RESOURCES, &ep->com.flags)) {
cxgb3_remove_tid(ep->com.tdev, (void *)ep, ep->hwtid);
dst_release(ep->dst);
l2t_release(L2DATA(ep->com.tdev), ep->l2t);
static void release_ep_resources(struct iwch_ep *ep)
{
PDBG("%s ep %p tid %d\n", __func__, ep, ep->hwtid);
- ep->com.flags |= RELEASE_RESOURCES;
+ set_bit(RELEASE_RESOURCES, &ep->com.flags);
put_ep(&ep->com);
}
event.private_data_len = ep->plen;
event.private_data = ep->mpa_pkt + sizeof(struct mpa_message);
event.provider_data = ep;
- if (state_read(&ep->parent_ep->com) != DEAD)
+ if (state_read(&ep->parent_ep->com) != DEAD) {
+ get_ep(&ep->com);
ep->parent_ep->com.cm_id->event_handler(
ep->parent_ep->com.cm_id,
&event);
+ }
put_ep(&ep->parent_ep->com);
ep->parent_ep = NULL;
}
* We get 2 abort replies from the HW. The first one must
* be ignored except for scribbling that we need one more.
*/
- if (!(ep->com.flags & ABORT_REQ_IN_PROGRESS)) {
- ep->com.flags |= ABORT_REQ_IN_PROGRESS;
+ if (!test_and_set_bit(ABORT_REQ_IN_PROGRESS, &ep->com.flags)) {
return CPL_RET_BUF_DONE;
}
/*
* We're gonna mark this puppy DEAD, but keep
* the reference on it until the ULP accepts or
- * rejects the CR.
+ * rejects the CR. Also wake up anyone waiting
+ * in rdma connection migration (see iwch_accept_cr()).
*/
__state_set(&ep->com, CLOSING);
- get_ep(&ep->com);
+ ep->com.rpl_done = 1;
+ ep->com.rpl_err = -ECONNRESET;
+ PDBG("waking up ep %p\n", ep);
+ wake_up(&ep->com.waitq);
break;
case MPA_REP_SENT:
__state_set(&ep->com, CLOSING);
* We get 2 peer aborts from the HW. The first one must
* be ignored except for scribbling that we need one more.
*/
- if (!(ep->com.flags & PEER_ABORT_IN_PROGRESS)) {
- ep->com.flags |= PEER_ABORT_IN_PROGRESS;
+ if (!test_and_set_bit(PEER_ABORT_IN_PROGRESS, &ep->com.flags)) {
return CPL_RET_BUF_DONE;
}
/*
* We're gonna mark this puppy DEAD, but keep
* the reference on it until the ULP accepts or
- * rejects the CR.
+ * rejects the CR. Also wake up anyone waiting
+ * in rdma connection migration (see iwch_accept_cr()).
*/
- get_ep(&ep->com);
+ ep->com.rpl_done = 1;
+ ep->com.rpl_err = -ECONNRESET;
+ PDBG("waking up ep %p\n", ep);
+ wake_up(&ep->com.waitq);
break;
case MORIBUND:
case CLOSING:
err = send_mpa_reject(ep, pdata, pdata_len);
err = iwch_ep_disconnect(ep, 0, GFP_KERNEL);
}
+ put_ep(&ep->com);
return 0;
}
struct iwch_qp *qp = get_qhp(h, conn_param->qpn);
PDBG("%s ep %p tid %u\n", __func__, ep, ep->hwtid);
- if (state_read(&ep->com) == DEAD)
- return -ECONNRESET;
+ if (state_read(&ep->com) == DEAD) {
+ err = -ECONNRESET;
+ goto err;
+ }
BUG_ON(state_read(&ep->com) != MPA_REQ_RCVD);
BUG_ON(!qp);
if ((conn_param->ord > qp->rhp->attr.max_rdma_read_qp_depth) ||
(conn_param->ird > qp->rhp->attr.max_rdma_reads_per_qp)) {
abort_connection(ep, NULL, GFP_KERNEL);
- return -EINVAL;
+ err = -EINVAL;
+ goto err;
}
cm_id->add_ref(cm_id);
ep->com.cm_id = cm_id;
ep->com.qp = qp;
- ep->com.rpl_done = 0;
- ep->com.rpl_err = 0;
ep->ird = conn_param->ird;
ep->ord = conn_param->ord;
PDBG("%s %d ird %d ord %d\n", __func__, __LINE__, ep->ird, ep->ord);
- get_ep(&ep->com);
-
/* bind QP to EP and move to RTS */
attrs.mpa_attr = ep->mpa_attr;
attrs.max_ird = ep->ird;
err = iwch_modify_qp(ep->com.qp->rhp,
ep->com.qp, mask, &attrs, 1);
if (err)
- goto err;
+ goto err1;
/* if needed, wait for wr_ack */
if (iwch_rqes_posted(qp)) {
wait_event(ep->com.waitq, ep->com.rpl_done);
err = ep->com.rpl_err;
if (err)
- goto err;
+ goto err1;
}
err = send_mpa_reply(ep, conn_param->private_data,
conn_param->private_data_len);
if (err)
- goto err;
+ goto err1;
state_set(&ep->com, FPDU_MODE);
established_upcall(ep);
put_ep(&ep->com);
return 0;
-err:
+err1:
ep->com.cm_id = NULL;
ep->com.qp = NULL;
cm_id->rem_ref(cm_id);
+err:
put_ep(&ep->com);
return err;
}
ep->com.state = CLOSING;
start_ep_timer(ep);
}
+ set_bit(CLOSE_SENT, &ep->com.flags);
break;
case CLOSING:
- close = 1;
- if (abrupt) {
- stop_ep_timer(ep);
- ep->com.state = ABORTING;
- } else
- ep->com.state = MORIBUND;
+ if (!test_and_set_bit(CLOSE_SENT, &ep->com.flags)) {
+ close = 1;
+ if (abrupt) {
+ stop_ep_timer(ep);
+ ep->com.state = ABORTING;
+ } else
+ ep->com.state = MORIBUND;
+ }
break;
case MORIBUND:
case ABORTING:
};
enum iwch_ep_flags {
- PEER_ABORT_IN_PROGRESS = (1 << 0),
- ABORT_REQ_IN_PROGRESS = (1 << 1),
- RELEASE_RESOURCES = (1 << 2),
+ PEER_ABORT_IN_PROGRESS = 0,
+ ABORT_REQ_IN_PROGRESS = 1,
+ RELEASE_RESOURCES = 2,
+ CLOSE_SENT = 3,
};
struct iwch_ep_common {
wait_queue_head_t waitq;
int rpl_done;
int rpl_err;
- u32 flags;
+ unsigned long flags;
};
struct iwch_listen_ep {
#include "iwch.h"
#include "iwch_provider.h"
-static void iwch_finish_mem_reg(struct iwch_mr *mhp, u32 stag)
+static int iwch_finish_mem_reg(struct iwch_mr *mhp, u32 stag)
{
u32 mmid;
mhp->attr.stag = stag;
mmid = stag >> 8;
mhp->ibmr.rkey = mhp->ibmr.lkey = stag;
- insert_handle(mhp->rhp, &mhp->rhp->mmidr, mhp, mmid);
PDBG("%s mmid 0x%x mhp %p\n", __func__, mmid, mhp);
+ return insert_handle(mhp->rhp, &mhp->rhp->mmidr, mhp, mmid);
}
int iwch_register_mem(struct iwch_dev *rhp, struct iwch_pd *php,
struct iwch_mr *mhp, int shift)
{
u32 stag;
+ int ret;
if (cxio_register_phys_mem(&rhp->rdev,
&stag, mhp->attr.pdid,
mhp->attr.pbl_size, mhp->attr.pbl_addr))
return -ENOMEM;
- iwch_finish_mem_reg(mhp, stag);
-
- return 0;
+ ret = iwch_finish_mem_reg(mhp, stag);
+ if (ret)
+ cxio_dereg_mem(&rhp->rdev, mhp->attr.stag, mhp->attr.pbl_size,
+ mhp->attr.pbl_addr);
+ return ret;
}
int iwch_reregister_mem(struct iwch_dev *rhp, struct iwch_pd *php,
int npages)
{
u32 stag;
+ int ret;
/* We could support this... */
if (npages > mhp->attr.pbl_size)
mhp->attr.pbl_size, mhp->attr.pbl_addr))
return -ENOMEM;
- iwch_finish_mem_reg(mhp, stag);
+ ret = iwch_finish_mem_reg(mhp, stag);
+ if (ret)
+ cxio_dereg_mem(&rhp->rdev, mhp->attr.stag, mhp->attr.pbl_size,
+ mhp->attr.pbl_addr);
- return 0;
+ return ret;
}
int iwch_alloc_pbl(struct iwch_mr *mhp, int npages)
spin_lock_init(&chp->lock);
atomic_set(&chp->refcnt, 1);
init_waitqueue_head(&chp->wait);
- insert_handle(rhp, &rhp->cqidr, chp, chp->cq.cqid);
+ if (insert_handle(rhp, &rhp->cqidr, chp, chp->cq.cqid)) {
+ cxio_destroy_cq(&chp->rhp->rdev, &chp->cq);
+ kfree(chp);
+ return ERR_PTR(-ENOMEM);
+ }
if (ucontext) {
struct iwch_mm_entry *mm;
mhp->attr.stag = stag;
mmid = (stag) >> 8;
mhp->ibmw.rkey = stag;
- insert_handle(rhp, &rhp->mmidr, mhp, mmid);
+ if (insert_handle(rhp, &rhp->mmidr, mhp, mmid)) {
+ cxio_deallocate_window(&rhp->rdev, mhp->attr.stag);
+ kfree(mhp);
+ return ERR_PTR(-ENOMEM);
+ }
PDBG("%s mmid 0x%x mhp %p stag 0x%x\n", __func__, mmid, mhp, stag);
return &(mhp->ibmw);
}
struct iwch_mr *mhp;
u32 mmid;
u32 stag = 0;
- int ret;
+ int ret = 0;
php = to_iwch_pd(pd);
rhp = php->rhp;
mhp = kzalloc(sizeof(*mhp), GFP_KERNEL);
if (!mhp)
- return ERR_PTR(-ENOMEM);
+ goto err;
mhp->rhp = rhp;
ret = iwch_alloc_pbl(mhp, pbl_depth);
- if (ret) {
- kfree(mhp);
- return ERR_PTR(ret);
- }
+ if (ret)
+ goto err1;
mhp->attr.pbl_size = pbl_depth;
ret = cxio_allocate_stag(&rhp->rdev, &stag, php->pdid,
mhp->attr.pbl_size, mhp->attr.pbl_addr);
- if (ret) {
- iwch_free_pbl(mhp);
- kfree(mhp);
- return ERR_PTR(ret);
- }
+ if (ret)
+ goto err2;
mhp->attr.pdid = php->pdid;
mhp->attr.type = TPT_NON_SHARED_MR;
mhp->attr.stag = stag;
mhp->attr.state = 1;
mmid = (stag) >> 8;
mhp->ibmr.rkey = mhp->ibmr.lkey = stag;
- insert_handle(rhp, &rhp->mmidr, mhp, mmid);
+ if (insert_handle(rhp, &rhp->mmidr, mhp, mmid))
+ goto err3;
+
PDBG("%s mmid 0x%x mhp %p stag 0x%x\n", __func__, mmid, mhp, stag);
return &(mhp->ibmr);
+err3:
+ cxio_dereg_mem(&rhp->rdev, stag, mhp->attr.pbl_size,
+ mhp->attr.pbl_addr);
+err2:
+ iwch_free_pbl(mhp);
+err1:
+ kfree(mhp);
+err:
+ return ERR_PTR(ret);
}
static struct ib_fast_reg_page_list *iwch_alloc_fastreg_pbl(
spin_lock_init(&qhp->lock);
init_waitqueue_head(&qhp->wait);
atomic_set(&qhp->refcnt, 1);
- insert_handle(rhp, &rhp->qpidr, qhp, qhp->wq.qpid);
+
+ if (insert_handle(rhp, &rhp->qpidr, qhp, qhp->wq.qpid)) {
+ cxio_destroy_qp(&rhp->rdev, &qhp->wq,
+ ucontext ? &ucontext->uctx : &rhp->rdev.uctx);
+ kfree(qhp);
+ return ERR_PTR(-ENOMEM);
+ }
if (udata) {
bail2:
ib_unregister_device(&dev->ibdev);
bail1:
+ kfree(dev->ibdev.iwcm);
return ret;
}
device_remove_file(&dev->ibdev.dev,
iwch_class_attributes[i]);
ib_unregister_device(&dev->ibdev);
+ kfree(dev->ibdev.iwcm);
return;
}
init_attr.qp_dma_size = (1UL << qhp->wq.size_log2);
init_attr.rqe_count = iwch_rqes_posted(qhp);
init_attr.flags = qhp->attr.mpa_attr.initiator ? MPA_INITIATOR : 0;
+ init_attr.chan = qhp->ep->l2t->smt_idx;
if (peer2peer) {
init_attr.rtr_type = RTR_READ;
if (init_attr.ord == 0 && qhp->attr.mpa_attr.initiator)
#include "ehca_tools.h"
#include "hcp_if.h"
-#define HCAD_VERSION "0028"
+#define HCAD_VERSION "0029"
MODULE_LICENSE("Dual BSD/GPL");
MODULE_AUTHOR("Christoph Raisch <raisch@de.ibm.com>");
static int ehca_poll_all_eqs = 1;
int ehca_debug_level = 0;
-int ehca_nr_ports = 2;
+int ehca_nr_ports = -1;
int ehca_use_hp_mr = 0;
int ehca_port_act_time = 30;
int ehca_static_rate = -1;
"Hardware level (0: autosensing (default), "
"0x10..0x14: eHCA, 0x20..0x23: eHCA2)");
MODULE_PARM_DESC(nr_ports,
- "number of connected ports (-1: autodetect, 1: port one only, "
- "2: two ports (default)");
+ "number of connected ports (-1: autodetect (default), "
+ "1: port one only, 2: two ports)");
MODULE_PARM_DESC(use_hp_mr,
"Use high performance MRs (default: no)");
MODULE_PARM_DESC(port_act_time,
wc->slid = cqe->rlid;
wc->dlid_path_bits = cqe->dlid;
wc->src_qp = cqe->remote_qp_number;
- wc->wc_flags = cqe->w_completion_flags;
+ /*
+ * HW has "Immed data present" and "GRH present" in bits 6 and 5.
+ * SW defines those in bits 1 and 0, so we can just shift and mask.
+ */
+ wc->wc_flags = (cqe->w_completion_flags >> 5) & 3;
wc->ex.imm_data = cpu_to_be32(cqe->immediate_data);
wc->sl = cqe->service_level;
u8 data[192];
} __attribute__ ((packed));
+/* TC/SL/FL packed into 32 bits, as in ClassPortInfo */
+struct tcslfl {
+ u32 tc:8;
+ u32 sl:4;
+ u32 fl:20;
+} __attribute__ ((packed));
+
+/* IP Version/TC/FL packed into 32 bits, as in GRH */
+struct vertcfl {
+ u32 ver:4;
+ u32 tc:8;
+ u32 fl:20;
+} __attribute__ ((packed));
static int ehca_process_perf(struct ib_device *ibdev, u8 port_num,
+ struct ib_wc *in_wc, struct ib_grh *in_grh,
struct ib_mad *in_mad, struct ib_mad *out_mad)
{
struct ib_perf *in_perf = (struct ib_perf *)in_mad;
struct ib_perf *out_perf = (struct ib_perf *)out_mad;
struct ib_class_port_info *poi =
(struct ib_class_port_info *)out_perf->data;
+ struct tcslfl *tcslfl =
+ (struct tcslfl *)&poi->redirect_tcslfl;
struct ehca_shca *shca =
container_of(ibdev, struct ehca_shca, ib_device);
struct ehca_sport *sport = &shca->sport[port_num - 1];
poi->base_version = 1;
poi->class_version = 1;
poi->resp_time_value = 18;
- poi->redirect_lid = sport->saved_attr.lid;
- poi->redirect_qp = sport->pma_qp_nr;
+
+ /* copy local routing information from WC where applicable */
+ tcslfl->sl = in_wc->sl;
+ poi->redirect_lid =
+ sport->saved_attr.lid | in_wc->dlid_path_bits;
+ poi->redirect_qp = sport->pma_qp_nr;
poi->redirect_qkey = IB_QP1_QKEY;
- poi->redirect_pkey = IB_DEFAULT_PKEY_FULL;
+
+ ehca_query_pkey(ibdev, port_num, in_wc->pkey_index,
+ &poi->redirect_pkey);
+
+ /* if request was globally routed, copy route info */
+ if (in_grh) {
+ struct vertcfl *vertcfl =
+ (struct vertcfl *)&in_grh->version_tclass_flow;
+ memcpy(poi->redirect_gid, in_grh->dgid.raw,
+ sizeof(poi->redirect_gid));
+ tcslfl->tc = vertcfl->tc;
+ tcslfl->fl = vertcfl->fl;
+ } else
+ /* else only fill in default GID */
+ ehca_query_gid(ibdev, port_num, 0,
+ (union ib_gid *)&poi->redirect_gid);
ehca_dbg(ibdev, "ehca_pma_lid=%x ehca_pma_qp=%x",
sport->saved_attr.lid, sport->pma_qp_nr);
int ehca_process_mad(struct ib_device *ibdev, int mad_flags, u8 port_num,
struct ib_wc *in_wc, struct ib_grh *in_grh,
- struct ib_mad *in_mad,
- struct ib_mad *out_mad)
+ struct ib_mad *in_mad, struct ib_mad *out_mad)
{
int ret;
return IB_MAD_RESULT_SUCCESS;
ehca_dbg(ibdev, "port_num=%x src_qp=%x", port_num, in_wc->src_qp);
- ret = ehca_process_perf(ibdev, port_num, in_mad, out_mad);
+ ret = ehca_process_perf(ibdev, port_num, in_wc, in_grh,
+ in_mad, out_mad);
return ret;
}
pd->port_cnt = 1;
port_fp(fp) = pd;
pd->port_pid = get_pid(task_pid(current));
- strncpy(pd->port_comm, current->comm, sizeof(pd->port_comm));
+ strlcpy(pd->port_comm, current->comm, sizeof(pd->port_comm));
ipath_stats.sps_ports++;
ret = 0;
} else
if (smp->attr_mod)
smp->status |= IB_SMP_INVALID_FIELD;
- strncpy(smp->data, ibdev->node_desc, sizeof(smp->data));
+ memcpy(smp->data, ibdev->node_desc, sizeof(smp->data));
return reply(smp);
}
struct mlx4_ib_alloc_ucontext_resp resp;
int err;
+ if (!dev->ib_active)
+ return ERR_PTR(-EAGAIN);
+
resp.qp_tab_size = dev->dev->caps.num_qps;
resp.bf_reg_size = dev->dev->caps.bf_reg_size;
resp.bf_regs_per_page = dev->dev->caps.bf_regs_per_page;
static void *mlx4_ib_add(struct mlx4_dev *dev)
{
- static int mlx4_ib_version_printed;
struct mlx4_ib_dev *ibdev;
int num_ports = 0;
int i;
- if (!mlx4_ib_version_printed) {
- printk(KERN_INFO "%s", mlx4_ib_version);
- ++mlx4_ib_version_printed;
- }
+ printk_once(KERN_INFO "%s", mlx4_ib_version);
mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_IB)
num_ports++;
goto err_reg;
}
+ ibdev->ib_active = true;
+
return ibdev;
err_reg:
break;
case MLX4_DEV_EVENT_CATASTROPHIC_ERROR:
+ ibdev->ib_active = false;
ibev.event = IB_EVENT_DEVICE_FATAL;
break;
spinlock_t sm_lock;
struct mutex cap_mask_mutex;
+ bool ib_active;
};
static inline struct mlx4_ib_dev *to_mdev(struct ib_device *ibdev)
}
static void mlx4_ib_lock_cqs(struct mlx4_ib_cq *send_cq, struct mlx4_ib_cq *recv_cq)
+ __acquires(&send_cq->lock) __acquires(&recv_cq->lock)
{
- if (send_cq == recv_cq)
+ if (send_cq == recv_cq) {
spin_lock_irq(&send_cq->lock);
- else if (send_cq->mcq.cqn < recv_cq->mcq.cqn) {
+ __acquire(&recv_cq->lock);
+ } else if (send_cq->mcq.cqn < recv_cq->mcq.cqn) {
spin_lock_irq(&send_cq->lock);
spin_lock_nested(&recv_cq->lock, SINGLE_DEPTH_NESTING);
} else {
}
static void mlx4_ib_unlock_cqs(struct mlx4_ib_cq *send_cq, struct mlx4_ib_cq *recv_cq)
+ __releases(&send_cq->lock) __releases(&recv_cq->lock)
{
- if (send_cq == recv_cq)
+ if (send_cq == recv_cq) {
+ __release(&recv_cq->lock);
spin_unlock_irq(&send_cq->lock);
- else if (send_cq->mcq.cqn < recv_cq->mcq.cqn) {
+ } else if (send_cq->mcq.cqn < recv_cq->mcq.cqn) {
spin_unlock(&recv_cq->lock);
spin_unlock_irq(&send_cq->lock);
} else {
event.device = &dev->ib_dev;
event.event = IB_EVENT_DEVICE_FATAL;
event.element.port_num = 0;
+ dev->active = false;
ib_dispatch_event(&event);
#ifndef MTHCA_CONFIG_REG_H
#define MTHCA_CONFIG_REG_H
-#include <asm/page.h>
-
#define MTHCA_HCR_BASE 0x80680
#define MTHCA_HCR_SIZE 0x0001c
#define MTHCA_ECR_BASE 0x80700
struct ib_ah *sm_ah[MTHCA_MAX_PORTS];
spinlock_t sm_lock;
u8 rate[MTHCA_MAX_PORTS];
+ bool active;
};
#ifdef CONFIG_INFINIBAND_MTHCA_DEBUG
if (dev->mthca_flags & MTHCA_FLAG_MSI_X) {
static const char *eq_name[] = {
- [MTHCA_EQ_COMP] = DRV_NAME " (comp)",
- [MTHCA_EQ_ASYNC] = DRV_NAME " (async)",
- [MTHCA_EQ_CMD] = DRV_NAME " (cmd)"
+ [MTHCA_EQ_COMP] = DRV_NAME "-comp",
+ [MTHCA_EQ_ASYNC] = DRV_NAME "-async",
+ [MTHCA_EQ_CMD] = DRV_NAME "-cmd"
};
for (i = 0; i < MTHCA_NUM_EQ; ++i) {
+ snprintf(dev->eq_table.eq[i].irq_name,
+ IB_DEVICE_NAME_MAX,
+ "%s@pci:%s", eq_name[i],
+ pci_name(dev->pdev));
err = request_irq(dev->eq_table.eq[i].msi_x_vector,
mthca_is_memfree(dev) ?
mthca_arbel_msi_x_interrupt :
mthca_tavor_msi_x_interrupt,
- 0, eq_name[i], dev->eq_table.eq + i);
+ 0, dev->eq_table.eq[i].irq_name,
+ dev->eq_table.eq + i);
if (err)
goto err_out_cmd;
dev->eq_table.eq[i].have_irq = 1;
}
} else {
+ snprintf(dev->eq_table.eq[0].irq_name, IB_DEVICE_NAME_MAX,
+ DRV_NAME "@pci:%s", pci_name(dev->pdev));
err = request_irq(dev->pdev->irq,
mthca_is_memfree(dev) ?
mthca_arbel_interrupt :
mthca_tavor_interrupt,
- IRQF_SHARED, DRV_NAME, dev);
+ IRQF_SHARED, dev->eq_table.eq[0].irq_name, dev);
if (err)
goto err_out_cmd;
dev->eq_table.have_irq = 1;
pci_set_drvdata(pdev, mdev);
mdev->hca_type = hca_type;
+ mdev->active = true;
+
return 0;
err_unregister:
static int __devinit mthca_init_one(struct pci_dev *pdev,
const struct pci_device_id *id)
{
- static int mthca_version_printed = 0;
int ret;
mutex_lock(&mthca_device_mutex);
- if (!mthca_version_printed) {
- printk(KERN_INFO "%s", mthca_version);
- ++mthca_version_printed;
- }
+ printk_once(KERN_INFO "%s", mthca_version);
if (id->driver_data >= ARRAY_SIZE(mthca_hca_table)) {
printk(KERN_ERR PFX "%s has invalid driver data %lx\n",
struct mthca_ucontext *context;
int err;
+ if (!(to_mdev(ibdev)->active))
+ return ERR_PTR(-EAGAIN);
+
memset(&uresp, 0, sizeof uresp);
uresp.qp_tab_size = to_mdev(ibdev)->limits.num_qps;
int nent;
struct mthca_buf_list *page_list;
struct mthca_mr mr;
+ char irq_name[IB_DEVICE_NAME_MAX];
};
struct mthca_av;
}
static void mthca_lock_cqs(struct mthca_cq *send_cq, struct mthca_cq *recv_cq)
+ __acquires(&send_cq->lock) __acquires(&recv_cq->lock)
{
- if (send_cq == recv_cq)
+ if (send_cq == recv_cq) {
spin_lock_irq(&send_cq->lock);
- else if (send_cq->cqn < recv_cq->cqn) {
+ __acquire(&recv_cq->lock);
+ } else if (send_cq->cqn < recv_cq->cqn) {
spin_lock_irq(&send_cq->lock);
spin_lock_nested(&recv_cq->lock, SINGLE_DEPTH_NESTING);
} else {
}
static void mthca_unlock_cqs(struct mthca_cq *send_cq, struct mthca_cq *recv_cq)
+ __releases(&send_cq->lock) __releases(&recv_cq->lock)
{
- if (send_cq == recv_cq)
+ if (send_cq == recv_cq) {
+ __release(&recv_cq->lock);
spin_unlock_irq(&send_cq->lock);
- else if (send_cq->cqn < recv_cq->cqn) {
+ } else if (send_cq->cqn < recv_cq->cqn) {
spin_unlock(&recv_cq->lock);
spin_unlock_irq(&send_cq->lock);
} else {
* SOFTWARE.
*/
-#include <linux/init.h>
#include <linux/errno.h>
#include <linux/pci.h>
#include <linux/delay.h>
void nes_cm_disconn_worker(void *);
/* nes_verbs.c */
-int nes_hw_modify_qp(struct nes_device *, struct nes_qp *, u32, u32);
+int nes_hw_modify_qp(struct nes_device *, struct nes_qp *, u32, u32, u32);
int nes_modify_qp(struct ib_qp *, struct ib_qp_attr *, int, struct ib_udata *);
struct nes_ib_device *nes_init_ofa_device(struct net_device *);
void nes_destroy_ofa_device(struct nes_ib_device *);
*/
int nes_cm_disconn(struct nes_qp *nesqp)
{
- unsigned long flags;
-
- spin_lock_irqsave(&nesqp->lock, flags);
- if (nesqp->disconn_pending == 0) {
- nesqp->disconn_pending++;
- spin_unlock_irqrestore(&nesqp->lock, flags);
- /* init our disconnect work element, to */
- INIT_WORK(&nesqp->disconn_work, nes_disconnect_worker);
+ struct disconn_work *work;
- queue_work(g_cm_core->disconn_wq, &nesqp->disconn_work);
- } else
- spin_unlock_irqrestore(&nesqp->lock, flags);
+ work = kzalloc(sizeof *work, GFP_ATOMIC);
+ if (!work)
+ return -ENOMEM; /* Timer will clean up */
+ nes_add_ref(&nesqp->ibqp);
+ work->nesqp = nesqp;
+ INIT_WORK(&work->work, nes_disconnect_worker);
+ queue_work(g_cm_core->disconn_wq, &work->work);
return 0;
}
*/
static void nes_disconnect_worker(struct work_struct *work)
{
- struct nes_qp *nesqp = container_of(work, struct nes_qp, disconn_work);
+ struct disconn_work *dwork = container_of(work, struct disconn_work, work);
+ struct nes_qp *nesqp = dwork->nesqp;
+ kfree(dwork);
nes_debug(NES_DBG_CM, "processing AEQE id 0x%04X for QP%u.\n",
nesqp->last_aeq, nesqp->hwqp.qp_id);
nes_cm_disconn_true(nesqp);
+ nes_rem_ref(&nesqp->ibqp);
}
u16 last_ae;
u8 original_hw_tcp_state;
u8 original_ibqp_state;
- u8 issued_disconnect_reset = 0;
+ enum iw_cm_event_type disconn_status = IW_CM_EVENT_STATUS_OK;
+ int issue_disconn = 0;
+ int issue_close = 0;
+ int issue_flush = 0;
+ u32 flush_q = NES_CQP_FLUSH_RQ;
+ struct ib_event ibevent;
if (!nesqp) {
nes_debug(NES_DBG_CM, "disconnect_worker nesqp is NULL\n");
original_ibqp_state = nesqp->ibqp_state;
last_ae = nesqp->last_aeq;
+ if (nesqp->term_flags) {
+ issue_disconn = 1;
+ issue_close = 1;
+ nesqp->cm_id = NULL;
+ if (nesqp->flush_issued == 0) {
+ nesqp->flush_issued = 1;
+ issue_flush = 1;
+ }
+ } else if ((original_hw_tcp_state == NES_AEQE_TCP_STATE_CLOSE_WAIT) ||
+ ((original_ibqp_state == IB_QPS_RTS) &&
+ (last_ae == NES_AEQE_AEID_LLP_CONNECTION_RESET))) {
+ issue_disconn = 1;
+ if (last_ae == NES_AEQE_AEID_LLP_CONNECTION_RESET)
+ disconn_status = IW_CM_EVENT_STATUS_RESET;
+ }
+
+ if (((original_hw_tcp_state == NES_AEQE_TCP_STATE_CLOSED) ||
+ (original_hw_tcp_state == NES_AEQE_TCP_STATE_TIME_WAIT) ||
+ (last_ae == NES_AEQE_AEID_RDMAP_ROE_BAD_LLP_CLOSE) ||
+ (last_ae == NES_AEQE_AEID_LLP_CONNECTION_RESET))) {
+ issue_close = 1;
+ nesqp->cm_id = NULL;
+ if (nesqp->flush_issued == 0) {
+ nesqp->flush_issued = 1;
+ issue_flush = 1;
+ }
+ }
+
+ spin_unlock_irqrestore(&nesqp->lock, flags);
- nes_debug(NES_DBG_CM, "set ibqp_state=%u\n", nesqp->ibqp_state);
+ if ((issue_flush) && (nesqp->destroyed == 0)) {
+ /* Flush the queue(s) */
+ if (nesqp->hw_iwarp_state >= NES_AEQE_IWARP_STATE_TERMINATE)
+ flush_q |= NES_CQP_FLUSH_SQ;
+ flush_wqes(nesvnic->nesdev, nesqp, flush_q, 1);
- if ((nesqp->cm_id) && (cm_id->event_handler)) {
- if ((original_hw_tcp_state == NES_AEQE_TCP_STATE_CLOSE_WAIT) ||
- ((original_ibqp_state == IB_QPS_RTS) &&
- (last_ae == NES_AEQE_AEID_LLP_CONNECTION_RESET))) {
+ if (nesqp->term_flags) {
+ ibevent.device = nesqp->ibqp.device;
+ ibevent.event = nesqp->terminate_eventtype;
+ ibevent.element.qp = &nesqp->ibqp;
+ nesqp->ibqp.event_handler(&ibevent, nesqp->ibqp.qp_context);
+ }
+ }
+
+ if ((cm_id) && (cm_id->event_handler)) {
+ if (issue_disconn) {
atomic_inc(&cm_disconnects);
cm_event.event = IW_CM_EVENT_DISCONNECT;
- if (last_ae == NES_AEQE_AEID_LLP_CONNECTION_RESET) {
- cm_event.status = IW_CM_EVENT_STATUS_RESET;
- nes_debug(NES_DBG_CM, "Generating a CM "
- "Disconnect Event (status reset) for "
- "QP%u, cm_id = %p. \n",
- nesqp->hwqp.qp_id, cm_id);
- } else
- cm_event.status = IW_CM_EVENT_STATUS_OK;
-
+ cm_event.status = disconn_status;
cm_event.local_addr = cm_id->local_addr;
cm_event.remote_addr = cm_id->remote_addr;
cm_event.private_data = NULL;
nesqp->hwqp.sq_tail, cm_id,
atomic_read(&nesqp->refcount));
- spin_unlock_irqrestore(&nesqp->lock, flags);
ret = cm_id->event_handler(cm_id, &cm_event);
if (ret)
nes_debug(NES_DBG_CM, "OFA CM event_handler "
"returned, ret=%d\n", ret);
- spin_lock_irqsave(&nesqp->lock, flags);
}
- nesqp->disconn_pending = 0;
- /* There might have been another AE while the lock was released */
- original_hw_tcp_state = nesqp->hw_tcp_state;
- original_ibqp_state = nesqp->ibqp_state;
- last_ae = nesqp->last_aeq;
-
- if ((issued_disconnect_reset == 0) && (nesqp->cm_id) &&
- ((original_hw_tcp_state == NES_AEQE_TCP_STATE_CLOSED) ||
- (original_hw_tcp_state == NES_AEQE_TCP_STATE_TIME_WAIT) ||
- (last_ae == NES_AEQE_AEID_RDMAP_ROE_BAD_LLP_CLOSE) ||
- (last_ae == NES_AEQE_AEID_LLP_CONNECTION_RESET))) {
+ if (issue_close) {
atomic_inc(&cm_closes);
- nesqp->cm_id = NULL;
- nesqp->in_disconnect = 0;
- spin_unlock_irqrestore(&nesqp->lock, flags);
nes_disconnect(nesqp, 1);
cm_id->provider_data = nesqp;
}
cm_id->rem_ref(cm_id);
-
- spin_lock_irqsave(&nesqp->lock, flags);
- if (nesqp->flush_issued == 0) {
- nesqp->flush_issued = 1;
- spin_unlock_irqrestore(&nesqp->lock, flags);
- flush_wqes(nesvnic->nesdev, nesqp,
- NES_CQP_FLUSH_RQ, 1);
- } else
- spin_unlock_irqrestore(&nesqp->lock, flags);
- } else {
- cm_id = nesqp->cm_id;
- spin_unlock_irqrestore(&nesqp->lock, flags);
- /* check to see if the inbound reset beat the outbound reset */
- if ((!cm_id) && (last_ae==NES_AEQE_AEID_RESET_SENT)) {
- nes_debug(NES_DBG_CM, "QP%u: Decing refcount "
- "due to inbound reset beating the "
- "outbound reset.\n", nesqp->hwqp.qp_id);
- }
}
- } else {
- nesqp->disconn_pending = 0;
- spin_unlock_irqrestore(&nesqp->lock, flags);
}
return 0;
int schedule_nes_timer(struct nes_cm_node *, struct sk_buff *,
enum nes_timer_type, int, int);
-int nes_cm_disconn(struct nes_qp *);
-
int nes_accept(struct iw_cm_id *, struct iw_cm_conn_param *);
int nes_reject(struct iw_cm_id *, const void *, u8);
int nes_connect(struct iw_cm_id *, struct iw_cm_conn_param *);
static void process_critical_error(struct nes_device *nesdev);
static void nes_process_mac_intr(struct nes_device *nesdev, u32 mac_number);
static unsigned int nes_reset_adapter_ne020(struct nes_device *nesdev, u8 *OneG_Mode);
+static void nes_terminate_timeout(unsigned long context);
+static void nes_terminate_start_timer(struct nes_qp *nesqp);
#ifdef CONFIG_INFINIBAND_NES_DEBUG
static unsigned char *nes_iwarp_state_str[] = {
}
+static u8 *locate_mpa(u8 *pkt, u32 aeq_info)
+{
+ u16 pkt_len;
+
+ if (aeq_info & NES_AEQE_Q2_DATA_ETHERNET) {
+ /* skip over ethernet header */
+ pkt_len = be16_to_cpu(*(u16 *)(pkt + ETH_HLEN - 2));
+ pkt += ETH_HLEN;
+
+ /* Skip over IP and TCP headers */
+ pkt += 4 * (pkt[0] & 0x0f);
+ pkt += 4 * ((pkt[12] >> 4) & 0x0f);
+ }
+ return pkt;
+}
+
+/* Determine if incoming error pkt is rdma layer */
+static u32 iwarp_opcode(struct nes_qp *nesqp, u32 aeq_info)
+{
+ u8 *pkt;
+ u16 *mpa;
+ u32 opcode = 0xffffffff;
+
+ if (aeq_info & NES_AEQE_Q2_DATA_WRITTEN) {
+ pkt = nesqp->hwqp.q2_vbase + BAD_FRAME_OFFSET;
+ mpa = (u16 *)locate_mpa(pkt, aeq_info);
+ opcode = be16_to_cpu(mpa[1]) & 0xf;
+ }
+
+ return opcode;
+}
+
+/* Build iWARP terminate header */
+static int nes_bld_terminate_hdr(struct nes_qp *nesqp, u16 async_event_id, u32 aeq_info)
+{
+ u8 *pkt = nesqp->hwqp.q2_vbase + BAD_FRAME_OFFSET;
+ u16 ddp_seg_len;
+ int copy_len = 0;
+ u8 is_tagged = 0;
+ u8 flush_code = 0;
+ struct nes_terminate_hdr *termhdr;
+
+ termhdr = (struct nes_terminate_hdr *)nesqp->hwqp.q2_vbase;
+ memset(termhdr, 0, 64);
+
+ if (aeq_info & NES_AEQE_Q2_DATA_WRITTEN) {
+
+ /* Use data from offending packet to fill in ddp & rdma hdrs */
+ pkt = locate_mpa(pkt, aeq_info);
+ ddp_seg_len = be16_to_cpu(*(u16 *)pkt);
+ if (ddp_seg_len) {
+ copy_len = 2;
+ termhdr->hdrct = DDP_LEN_FLAG;
+ if (pkt[2] & 0x80) {
+ is_tagged = 1;
+ if (ddp_seg_len >= TERM_DDP_LEN_TAGGED) {
+ copy_len += TERM_DDP_LEN_TAGGED;
+ termhdr->hdrct |= DDP_HDR_FLAG;
+ }
+ } else {
+ if (ddp_seg_len >= TERM_DDP_LEN_UNTAGGED) {
+ copy_len += TERM_DDP_LEN_UNTAGGED;
+ termhdr->hdrct |= DDP_HDR_FLAG;
+ }
+
+ if (ddp_seg_len >= (TERM_DDP_LEN_UNTAGGED + TERM_RDMA_LEN)) {
+ if ((pkt[3] & RDMA_OPCODE_MASK) == RDMA_READ_REQ_OPCODE) {
+ copy_len += TERM_RDMA_LEN;
+ termhdr->hdrct |= RDMA_HDR_FLAG;
+ }
+ }
+ }
+ }
+ }
+
+ switch (async_event_id) {
+ case NES_AEQE_AEID_AMP_UNALLOCATED_STAG:
+ switch (iwarp_opcode(nesqp, aeq_info)) {
+ case IWARP_OPCODE_WRITE:
+ flush_code = IB_WC_LOC_PROT_ERR;
+ termhdr->layer_etype = (LAYER_DDP << 4) | DDP_TAGGED_BUFFER;
+ termhdr->error_code = DDP_TAGGED_INV_STAG;
+ break;
+ default:
+ flush_code = IB_WC_REM_ACCESS_ERR;
+ termhdr->layer_etype = (LAYER_RDMA << 4) | RDMAP_REMOTE_PROT;
+ termhdr->error_code = RDMAP_INV_STAG;
+ }
+ break;
+ case NES_AEQE_AEID_AMP_INVALID_STAG:
+ flush_code = IB_WC_REM_ACCESS_ERR;
+ termhdr->layer_etype = (LAYER_RDMA << 4) | RDMAP_REMOTE_PROT;
+ termhdr->error_code = RDMAP_INV_STAG;
+ break;
+ case NES_AEQE_AEID_AMP_BAD_QP:
+ flush_code = IB_WC_LOC_QP_OP_ERR;
+ termhdr->layer_etype = (LAYER_DDP << 4) | DDP_UNTAGGED_BUFFER;
+ termhdr->error_code = DDP_UNTAGGED_INV_QN;
+ break;
+ case NES_AEQE_AEID_AMP_BAD_STAG_KEY:
+ case NES_AEQE_AEID_AMP_BAD_STAG_INDEX:
+ switch (iwarp_opcode(nesqp, aeq_info)) {
+ case IWARP_OPCODE_SEND_INV:
+ case IWARP_OPCODE_SEND_SE_INV:
+ flush_code = IB_WC_REM_OP_ERR;
+ termhdr->layer_etype = (LAYER_RDMA << 4) | RDMAP_REMOTE_OP;
+ termhdr->error_code = RDMAP_CANT_INV_STAG;
+ break;
+ default:
+ flush_code = IB_WC_REM_ACCESS_ERR;
+ termhdr->layer_etype = (LAYER_RDMA << 4) | RDMAP_REMOTE_PROT;
+ termhdr->error_code = RDMAP_INV_STAG;
+ }
+ break;
+ case NES_AEQE_AEID_AMP_BOUNDS_VIOLATION:
+ if (aeq_info & (NES_AEQE_Q2_DATA_ETHERNET | NES_AEQE_Q2_DATA_MPA)) {
+ flush_code = IB_WC_LOC_PROT_ERR;
+ termhdr->layer_etype = (LAYER_DDP << 4) | DDP_TAGGED_BUFFER;
+ termhdr->error_code = DDP_TAGGED_BOUNDS;
+ } else {
+ flush_code = IB_WC_REM_ACCESS_ERR;
+ termhdr->layer_etype = (LAYER_RDMA << 4) | RDMAP_REMOTE_PROT;
+ termhdr->error_code = RDMAP_INV_BOUNDS;
+ }
+ break;
+ case NES_AEQE_AEID_AMP_RIGHTS_VIOLATION:
+ case NES_AEQE_AEID_AMP_INVALIDATE_NO_REMOTE_ACCESS_RIGHTS:
+ case NES_AEQE_AEID_PRIV_OPERATION_DENIED:
+ flush_code = IB_WC_REM_ACCESS_ERR;
+ termhdr->layer_etype = (LAYER_RDMA << 4) | RDMAP_REMOTE_PROT;
+ termhdr->error_code = RDMAP_ACCESS;
+ break;
+ case NES_AEQE_AEID_AMP_TO_WRAP:
+ flush_code = IB_WC_REM_ACCESS_ERR;
+ termhdr->layer_etype = (LAYER_RDMA << 4) | RDMAP_REMOTE_PROT;
+ termhdr->error_code = RDMAP_TO_WRAP;
+ break;
+ case NES_AEQE_AEID_AMP_BAD_PD:
+ switch (iwarp_opcode(nesqp, aeq_info)) {
+ case IWARP_OPCODE_WRITE:
+ flush_code = IB_WC_LOC_PROT_ERR;
+ termhdr->layer_etype = (LAYER_DDP << 4) | DDP_TAGGED_BUFFER;
+ termhdr->error_code = DDP_TAGGED_UNASSOC_STAG;
+ break;
+ case IWARP_OPCODE_SEND_INV:
+ case IWARP_OPCODE_SEND_SE_INV:
+ flush_code = IB_WC_REM_ACCESS_ERR;
+ termhdr->layer_etype = (LAYER_RDMA << 4) | RDMAP_REMOTE_PROT;
+ termhdr->error_code = RDMAP_CANT_INV_STAG;
+ break;
+ default:
+ flush_code = IB_WC_REM_ACCESS_ERR;
+ termhdr->layer_etype = (LAYER_RDMA << 4) | RDMAP_REMOTE_PROT;
+ termhdr->error_code = RDMAP_UNASSOC_STAG;
+ }
+ break;
+ case NES_AEQE_AEID_LLP_RECEIVED_MARKER_AND_LENGTH_FIELDS_DONT_MATCH:
+ flush_code = IB_WC_LOC_LEN_ERR;
+ termhdr->layer_etype = (LAYER_MPA << 4) | DDP_LLP;
+ termhdr->error_code = MPA_MARKER;
+ break;
+ case NES_AEQE_AEID_LLP_RECEIVED_MPA_CRC_ERROR:
+ flush_code = IB_WC_GENERAL_ERR;
+ termhdr->layer_etype = (LAYER_MPA << 4) | DDP_LLP;
+ termhdr->error_code = MPA_CRC;
+ break;
+ case NES_AEQE_AEID_LLP_SEGMENT_TOO_LARGE:
+ case NES_AEQE_AEID_LLP_SEGMENT_TOO_SMALL:
+ flush_code = IB_WC_LOC_LEN_ERR;
+ termhdr->layer_etype = (LAYER_DDP << 4) | DDP_CATASTROPHIC;
+ termhdr->error_code = DDP_CATASTROPHIC_LOCAL;
+ break;
+ case NES_AEQE_AEID_DDP_LCE_LOCAL_CATASTROPHIC:
+ case NES_AEQE_AEID_DDP_NO_L_BIT:
+ flush_code = IB_WC_FATAL_ERR;
+ termhdr->layer_etype = (LAYER_DDP << 4) | DDP_CATASTROPHIC;
+ termhdr->error_code = DDP_CATASTROPHIC_LOCAL;
+ break;
+ case NES_AEQE_AEID_DDP_INVALID_MSN_GAP_IN_MSN:
+ case NES_AEQE_AEID_DDP_INVALID_MSN_RANGE_IS_NOT_VALID:
+ flush_code = IB_WC_GENERAL_ERR;
+ termhdr->layer_etype = (LAYER_DDP << 4) | DDP_UNTAGGED_BUFFER;
+ termhdr->error_code = DDP_UNTAGGED_INV_MSN_RANGE;
+ break;
+ case NES_AEQE_AEID_DDP_UBE_DDP_MESSAGE_TOO_LONG_FOR_AVAILABLE_BUFFER:
+ flush_code = IB_WC_LOC_LEN_ERR;
+ termhdr->layer_etype = (LAYER_DDP << 4) | DDP_UNTAGGED_BUFFER;
+ termhdr->error_code = DDP_UNTAGGED_INV_TOO_LONG;
+ break;
+ case NES_AEQE_AEID_DDP_UBE_INVALID_DDP_VERSION:
+ flush_code = IB_WC_GENERAL_ERR;
+ if (is_tagged) {
+ termhdr->layer_etype = (LAYER_DDP << 4) | DDP_TAGGED_BUFFER;
+ termhdr->error_code = DDP_TAGGED_INV_DDP_VER;
+ } else {
+ termhdr->layer_etype = (LAYER_DDP << 4) | DDP_UNTAGGED_BUFFER;
+ termhdr->error_code = DDP_UNTAGGED_INV_DDP_VER;
+ }
+ break;
+ case NES_AEQE_AEID_DDP_UBE_INVALID_MO:
+ flush_code = IB_WC_GENERAL_ERR;
+ termhdr->layer_etype = (LAYER_DDP << 4) | DDP_UNTAGGED_BUFFER;
+ termhdr->error_code = DDP_UNTAGGED_INV_MO;
+ break;
+ case NES_AEQE_AEID_DDP_UBE_INVALID_MSN_NO_BUFFER_AVAILABLE:
+ flush_code = IB_WC_REM_OP_ERR;
+ termhdr->layer_etype = (LAYER_DDP << 4) | DDP_UNTAGGED_BUFFER;
+ termhdr->error_code = DDP_UNTAGGED_INV_MSN_NO_BUF;
+ break;
+ case NES_AEQE_AEID_DDP_UBE_INVALID_QN:
+ flush_code = IB_WC_GENERAL_ERR;
+ termhdr->layer_etype = (LAYER_DDP << 4) | DDP_UNTAGGED_BUFFER;
+ termhdr->error_code = DDP_UNTAGGED_INV_QN;
+ break;
+ case NES_AEQE_AEID_RDMAP_ROE_INVALID_RDMAP_VERSION:
+ flush_code = IB_WC_GENERAL_ERR;
+ termhdr->layer_etype = (LAYER_RDMA << 4) | RDMAP_REMOTE_OP;
+ termhdr->error_code = RDMAP_INV_RDMAP_VER;
+ break;
+ case NES_AEQE_AEID_RDMAP_ROE_UNEXPECTED_OPCODE:
+ flush_code = IB_WC_LOC_QP_OP_ERR;
+ termhdr->layer_etype = (LAYER_RDMA << 4) | RDMAP_REMOTE_OP;
+ termhdr->error_code = RDMAP_UNEXPECTED_OP;
+ break;
+ default:
+ flush_code = IB_WC_FATAL_ERR;
+ termhdr->layer_etype = (LAYER_RDMA << 4) | RDMAP_REMOTE_OP;
+ termhdr->error_code = RDMAP_UNSPECIFIED;
+ break;
+ }
+
+ if (copy_len)
+ memcpy(termhdr + 1, pkt, copy_len);
+
+ if ((flush_code) && ((NES_AEQE_INBOUND_RDMA & aeq_info) == 0)) {
+ if (aeq_info & NES_AEQE_SQ)
+ nesqp->term_sq_flush_code = flush_code;
+ else
+ nesqp->term_rq_flush_code = flush_code;
+ }
+
+ return sizeof(struct nes_terminate_hdr) + copy_len;
+}
+
+static void nes_terminate_connection(struct nes_device *nesdev, struct nes_qp *nesqp,
+ struct nes_hw_aeqe *aeqe, enum ib_event_type eventtype)
+{
+ u64 context;
+ unsigned long flags;
+ u32 aeq_info;
+ u16 async_event_id;
+ u8 tcp_state;
+ u8 iwarp_state;
+ u32 termlen = 0;
+ u32 mod_qp_flags = NES_CQP_QP_IWARP_STATE_TERMINATE |
+ NES_CQP_QP_TERM_DONT_SEND_FIN;
+ struct nes_adapter *nesadapter = nesdev->nesadapter;
+
+ if (nesqp->term_flags & NES_TERM_SENT)
+ return; /* Sanity check */
+
+ aeq_info = le32_to_cpu(aeqe->aeqe_words[NES_AEQE_MISC_IDX]);
+ tcp_state = (aeq_info & NES_AEQE_TCP_STATE_MASK) >> NES_AEQE_TCP_STATE_SHIFT;
+ iwarp_state = (aeq_info & NES_AEQE_IWARP_STATE_MASK) >> NES_AEQE_IWARP_STATE_SHIFT;
+ async_event_id = (u16)aeq_info;
+
+ context = (unsigned long)nesadapter->qp_table[le32_to_cpu(
+ aeqe->aeqe_words[NES_AEQE_COMP_QP_CQ_ID_IDX]) - NES_FIRST_QPN];
+ if (!context) {
+ WARN_ON(!context);
+ return;
+ }
+
+ nesqp = (struct nes_qp *)(unsigned long)context;
+ spin_lock_irqsave(&nesqp->lock, flags);
+ nesqp->hw_iwarp_state = iwarp_state;
+ nesqp->hw_tcp_state = tcp_state;
+ nesqp->last_aeq = async_event_id;
+ nesqp->terminate_eventtype = eventtype;
+ spin_unlock_irqrestore(&nesqp->lock, flags);
+
+ if (nesadapter->send_term_ok)
+ termlen = nes_bld_terminate_hdr(nesqp, async_event_id, aeq_info);
+ else
+ mod_qp_flags |= NES_CQP_QP_TERM_DONT_SEND_TERM_MSG;
+
+ nes_terminate_start_timer(nesqp);
+ nesqp->term_flags |= NES_TERM_SENT;
+ nes_hw_modify_qp(nesdev, nesqp, mod_qp_flags, termlen, 0);
+}
+
+static void nes_terminate_send_fin(struct nes_device *nesdev,
+ struct nes_qp *nesqp, struct nes_hw_aeqe *aeqe)
+{
+ u32 aeq_info;
+ u16 async_event_id;
+ u8 tcp_state;
+ u8 iwarp_state;
+ unsigned long flags;
+
+ aeq_info = le32_to_cpu(aeqe->aeqe_words[NES_AEQE_MISC_IDX]);
+ tcp_state = (aeq_info & NES_AEQE_TCP_STATE_MASK) >> NES_AEQE_TCP_STATE_SHIFT;
+ iwarp_state = (aeq_info & NES_AEQE_IWARP_STATE_MASK) >> NES_AEQE_IWARP_STATE_SHIFT;
+ async_event_id = (u16)aeq_info;
+
+ spin_lock_irqsave(&nesqp->lock, flags);
+ nesqp->hw_iwarp_state = iwarp_state;
+ nesqp->hw_tcp_state = tcp_state;
+ nesqp->last_aeq = async_event_id;
+ spin_unlock_irqrestore(&nesqp->lock, flags);
+
+ /* Send the fin only */
+ nes_hw_modify_qp(nesdev, nesqp, NES_CQP_QP_IWARP_STATE_TERMINATE |
+ NES_CQP_QP_TERM_DONT_SEND_TERM_MSG, 0, 0);
+}
+
+/* Cleanup after a terminate sent or received */
+static void nes_terminate_done(struct nes_qp *nesqp, int timeout_occurred)
+{
+ u32 next_iwarp_state = NES_CQP_QP_IWARP_STATE_ERROR;
+ unsigned long flags;
+ struct nes_vnic *nesvnic = to_nesvnic(nesqp->ibqp.device);
+ struct nes_device *nesdev = nesvnic->nesdev;
+ u8 first_time = 0;
+
+ spin_lock_irqsave(&nesqp->lock, flags);
+ if (nesqp->hte_added) {
+ nesqp->hte_added = 0;
+ next_iwarp_state |= NES_CQP_QP_DEL_HTE;
+ }
+
+ first_time = (nesqp->term_flags & NES_TERM_DONE) == 0;
+ nesqp->term_flags |= NES_TERM_DONE;
+ spin_unlock_irqrestore(&nesqp->lock, flags);
+
+ /* Make sure we go through this only once */
+ if (first_time) {
+ if (timeout_occurred == 0)
+ del_timer(&nesqp->terminate_timer);
+ else
+ next_iwarp_state |= NES_CQP_QP_RESET;
+
+ nes_hw_modify_qp(nesdev, nesqp, next_iwarp_state, 0, 0);
+ nes_cm_disconn(nesqp);
+ }
+}
+
+static void nes_terminate_received(struct nes_device *nesdev,
+ struct nes_qp *nesqp, struct nes_hw_aeqe *aeqe)
+{
+ u32 aeq_info;
+ u8 *pkt;
+ u32 *mpa;
+ u8 ddp_ctl;
+ u8 rdma_ctl;
+ u16 aeq_id = 0;
+
+ aeq_info = le32_to_cpu(aeqe->aeqe_words[NES_AEQE_MISC_IDX]);
+ if (aeq_info & NES_AEQE_Q2_DATA_WRITTEN) {
+ /* Terminate is not a performance path so the silicon */
+ /* did not validate the frame - do it now */
+ pkt = nesqp->hwqp.q2_vbase + BAD_FRAME_OFFSET;
+ mpa = (u32 *)locate_mpa(pkt, aeq_info);
+ ddp_ctl = (be32_to_cpu(mpa[0]) >> 8) & 0xff;
+ rdma_ctl = be32_to_cpu(mpa[0]) & 0xff;
+ if ((ddp_ctl & 0xc0) != 0x40)
+ aeq_id = NES_AEQE_AEID_DDP_LCE_LOCAL_CATASTROPHIC;
+ else if ((ddp_ctl & 0x03) != 1)
+ aeq_id = NES_AEQE_AEID_DDP_UBE_INVALID_DDP_VERSION;
+ else if (be32_to_cpu(mpa[2]) != 2)
+ aeq_id = NES_AEQE_AEID_DDP_UBE_INVALID_QN;
+ else if (be32_to_cpu(mpa[3]) != 1)
+ aeq_id = NES_AEQE_AEID_DDP_INVALID_MSN_GAP_IN_MSN;
+ else if (be32_to_cpu(mpa[4]) != 0)
+ aeq_id = NES_AEQE_AEID_DDP_UBE_INVALID_MO;
+ else if ((rdma_ctl & 0xc0) != 0x40)
+ aeq_id = NES_AEQE_AEID_RDMAP_ROE_INVALID_RDMAP_VERSION;
+
+ if (aeq_id) {
+ /* Bad terminate recvd - send back a terminate */
+ aeq_info = (aeq_info & 0xffff0000) | aeq_id;
+ aeqe->aeqe_words[NES_AEQE_MISC_IDX] = cpu_to_le32(aeq_info);
+ nes_terminate_connection(nesdev, nesqp, aeqe, IB_EVENT_QP_FATAL);
+ return;
+ }
+ }
+
+ nesqp->term_flags |= NES_TERM_RCVD;
+ nesqp->terminate_eventtype = IB_EVENT_QP_FATAL;
+ nes_terminate_start_timer(nesqp);
+ nes_terminate_send_fin(nesdev, nesqp, aeqe);
+}
+
+/* Timeout routine in case terminate fails to complete */
+static void nes_terminate_timeout(unsigned long context)
+{
+ struct nes_qp *nesqp = (struct nes_qp *)(unsigned long)context;
+
+ nes_terminate_done(nesqp, 1);
+}
+
+/* Set a timer in case hw cannot complete the terminate sequence */
+static void nes_terminate_start_timer(struct nes_qp *nesqp)
+{
+ init_timer(&nesqp->terminate_timer);
+ nesqp->terminate_timer.function = nes_terminate_timeout;
+ nesqp->terminate_timer.expires = jiffies + HZ;
+ nesqp->terminate_timer.data = (unsigned long)nesqp;
+ add_timer(&nesqp->terminate_timer);
+}
+
/**
* nes_process_iwarp_aeqe
*/
struct nes_hw_aeqe *aeqe)
{
u64 context;
- u64 aeqe_context = 0;
unsigned long flags;
struct nes_qp *nesqp;
+ struct nes_hw_cq *hw_cq;
+ struct nes_cq *nescq;
int resource_allocated;
- /* struct iw_cm_id *cm_id; */
struct nes_adapter *nesadapter = nesdev->nesadapter;
- struct ib_event ibevent;
- /* struct iw_cm_event cm_event; */
u32 aeq_info;
u32 next_iwarp_state = 0;
u16 async_event_id;
u8 tcp_state;
u8 iwarp_state;
+ int must_disconn = 1;
+ int must_terminate = 0;
+ struct ib_event ibevent;
nes_debug(NES_DBG_AEQ, "\n");
aeq_info = le32_to_cpu(aeqe->aeqe_words[NES_AEQE_MISC_IDX]);
- if ((NES_AEQE_INBOUND_RDMA&aeq_info) || (!(NES_AEQE_QP&aeq_info))) {
+ if ((NES_AEQE_INBOUND_RDMA & aeq_info) || (!(NES_AEQE_QP & aeq_info))) {
context = le32_to_cpu(aeqe->aeqe_words[NES_AEQE_COMP_CTXT_LOW_IDX]);
context += ((u64)le32_to_cpu(aeqe->aeqe_words[NES_AEQE_COMP_CTXT_HIGH_IDX])) << 32;
} else {
- aeqe_context = le32_to_cpu(aeqe->aeqe_words[NES_AEQE_COMP_CTXT_LOW_IDX]);
- aeqe_context += ((u64)le32_to_cpu(aeqe->aeqe_words[NES_AEQE_COMP_CTXT_HIGH_IDX])) << 32;
context = (unsigned long)nesadapter->qp_table[le32_to_cpu(
aeqe->aeqe_words[NES_AEQE_COMP_QP_CQ_ID_IDX]) - NES_FIRST_QPN];
BUG_ON(!context);
switch (async_event_id) {
case NES_AEQE_AEID_LLP_FIN_RECEIVED:
- nesqp = *((struct nes_qp **)&context);
+ nesqp = (struct nes_qp *)(unsigned long)context;
+
+ if (nesqp->term_flags)
+ return; /* Ignore it, wait for close complete */
+
if (atomic_inc_return(&nesqp->close_timer_started) == 1) {
nesqp->cm_id->add_ref(nesqp->cm_id);
schedule_nes_timer(nesqp->cm_node, (struct sk_buff *)nesqp,
nesqp->hwqp.qp_id, atomic_read(&nesqp->refcount),
async_event_id, nesqp->last_aeq, tcp_state);
}
+
if ((tcp_state != NES_AEQE_TCP_STATE_CLOSE_WAIT) ||
(nesqp->ibqp_state != IB_QPS_RTS)) {
/* FIN Received but tcp state or IB state moved on,
should expect a close complete */
return;
}
+
case NES_AEQE_AEID_LLP_CLOSE_COMPLETE:
+ nesqp = (struct nes_qp *)(unsigned long)context;
+ if (nesqp->term_flags) {
+ nes_terminate_done(nesqp, 0);
+ return;
+ }
+
case NES_AEQE_AEID_LLP_CONNECTION_RESET:
- case NES_AEQE_AEID_TERMINATE_SENT:
- case NES_AEQE_AEID_RDMAP_ROE_BAD_LLP_CLOSE:
case NES_AEQE_AEID_RESET_SENT:
- nesqp = *((struct nes_qp **)&context);
+ nesqp = (struct nes_qp *)(unsigned long)context;
if (async_event_id == NES_AEQE_AEID_RESET_SENT) {
tcp_state = NES_AEQE_TCP_STATE_CLOSED;
}
if ((tcp_state == NES_AEQE_TCP_STATE_CLOSED) ||
(tcp_state == NES_AEQE_TCP_STATE_TIME_WAIT)) {
nesqp->hte_added = 0;
- spin_unlock_irqrestore(&nesqp->lock, flags);
- nes_debug(NES_DBG_AEQ, "issuing hw modifyqp for QP%u to remove hte\n",
- nesqp->hwqp.qp_id);
- nes_hw_modify_qp(nesdev, nesqp,
- NES_CQP_QP_IWARP_STATE_ERROR | NES_CQP_QP_DEL_HTE, 0);
- spin_lock_irqsave(&nesqp->lock, flags);
+ next_iwarp_state = NES_CQP_QP_IWARP_STATE_ERROR | NES_CQP_QP_DEL_HTE;
}
if ((nesqp->ibqp_state == IB_QPS_RTS) &&
nesqp->hw_iwarp_state = NES_AEQE_IWARP_STATE_CLOSING;
break;
case NES_AEQE_IWARP_STATE_TERMINATE:
- next_iwarp_state = NES_CQP_QP_IWARP_STATE_TERMINATE;
- nesqp->hw_iwarp_state = NES_AEQE_IWARP_STATE_TERMINATE;
- if (async_event_id == NES_AEQE_AEID_RDMAP_ROE_BAD_LLP_CLOSE) {
- next_iwarp_state |= 0x02000000;
- nesqp->hw_tcp_state = NES_AEQE_TCP_STATE_CLOSED;
- }
+ must_disconn = 0; /* terminate path takes care of disconn */
+ if (nesqp->term_flags == 0)
+ must_terminate = 1;
break;
- default:
- next_iwarp_state = 0;
- }
- spin_unlock_irqrestore(&nesqp->lock, flags);
- if (next_iwarp_state) {
- nes_debug(NES_DBG_AEQ, "issuing hw modifyqp for QP%u. next state = 0x%08X,"
- " also added another reference\n",
- nesqp->hwqp.qp_id, next_iwarp_state);
- nes_hw_modify_qp(nesdev, nesqp, next_iwarp_state, 0);
}
- nes_cm_disconn(nesqp);
} else {
if (async_event_id == NES_AEQE_AEID_LLP_FIN_RECEIVED) {
/* FIN Received but ib state not RTS,
close complete will be on its way */
- spin_unlock_irqrestore(&nesqp->lock, flags);
- return;
- }
- spin_unlock_irqrestore(&nesqp->lock, flags);
- if (async_event_id == NES_AEQE_AEID_RDMAP_ROE_BAD_LLP_CLOSE) {
- next_iwarp_state = NES_CQP_QP_IWARP_STATE_TERMINATE | 0x02000000;
- nesqp->hw_tcp_state = NES_AEQE_TCP_STATE_CLOSED;
- nes_debug(NES_DBG_AEQ, "issuing hw modifyqp for QP%u. next state = 0x%08X,"
- " also added another reference\n",
- nesqp->hwqp.qp_id, next_iwarp_state);
- nes_hw_modify_qp(nesdev, nesqp, next_iwarp_state, 0);
+ must_disconn = 0;
}
- nes_cm_disconn(nesqp);
}
- break;
- case NES_AEQE_AEID_LLP_TERMINATE_RECEIVED:
- nesqp = *((struct nes_qp **)&context);
- spin_lock_irqsave(&nesqp->lock, flags);
- nesqp->hw_iwarp_state = iwarp_state;
- nesqp->hw_tcp_state = tcp_state;
- nesqp->last_aeq = async_event_id;
spin_unlock_irqrestore(&nesqp->lock, flags);
- nes_debug(NES_DBG_AEQ, "Processing an NES_AEQE_AEID_LLP_TERMINATE_RECEIVED"
- " event on QP%u \n Q2 Data:\n",
- nesqp->hwqp.qp_id);
- if (nesqp->ibqp.event_handler) {
- ibevent.device = nesqp->ibqp.device;
- ibevent.element.qp = &nesqp->ibqp;
- ibevent.event = IB_EVENT_QP_FATAL;
- nesqp->ibqp.event_handler(&ibevent, nesqp->ibqp.qp_context);
- }
- if ((tcp_state == NES_AEQE_TCP_STATE_CLOSE_WAIT) ||
- ((nesqp->ibqp_state == IB_QPS_RTS)&&
- (async_event_id == NES_AEQE_AEID_LLP_CONNECTION_RESET))) {
+
+ if (must_terminate)
+ nes_terminate_connection(nesdev, nesqp, aeqe, IB_EVENT_QP_FATAL);
+ else if (must_disconn) {
+ if (next_iwarp_state) {
+ nes_debug(NES_DBG_AEQ, "issuing hw modifyqp for QP%u. next state = 0x%08X\n",
+ nesqp->hwqp.qp_id, next_iwarp_state);
+ nes_hw_modify_qp(nesdev, nesqp, next_iwarp_state, 0, 0);
+ }
nes_cm_disconn(nesqp);
- } else {
- nesqp->in_disconnect = 0;
- wake_up(&nesqp->kick_waitq);
}
break;
- case NES_AEQE_AEID_LLP_TOO_MANY_RETRIES:
- nesqp = *((struct nes_qp **)&context);
- spin_lock_irqsave(&nesqp->lock, flags);
- nesqp->hw_iwarp_state = NES_AEQE_IWARP_STATE_ERROR;
- nesqp->hw_tcp_state = NES_AEQE_TCP_STATE_CLOSED;
- nesqp->last_aeq = async_event_id;
- if (nesqp->cm_id) {
- nes_debug(NES_DBG_AEQ, "Processing an NES_AEQE_AEID_LLP_TOO_MANY_RETRIES"
- " event on QP%u, remote IP = 0x%08X \n",
- nesqp->hwqp.qp_id,
- ntohl(nesqp->cm_id->remote_addr.sin_addr.s_addr));
- } else {
- nes_debug(NES_DBG_AEQ, "Processing an NES_AEQE_AEID_LLP_TOO_MANY_RETRIES"
- " event on QP%u \n",
- nesqp->hwqp.qp_id);
- }
- spin_unlock_irqrestore(&nesqp->lock, flags);
- next_iwarp_state = NES_CQP_QP_IWARP_STATE_ERROR | NES_CQP_QP_RESET;
- nes_hw_modify_qp(nesdev, nesqp, next_iwarp_state, 0);
- if (nesqp->ibqp.event_handler) {
- ibevent.device = nesqp->ibqp.device;
- ibevent.element.qp = &nesqp->ibqp;
- ibevent.event = IB_EVENT_QP_FATAL;
- nesqp->ibqp.event_handler(&ibevent, nesqp->ibqp.qp_context);
- }
+
+ case NES_AEQE_AEID_TERMINATE_SENT:
+ nesqp = (struct nes_qp *)(unsigned long)context;
+ nes_terminate_send_fin(nesdev, nesqp, aeqe);
break;
- case NES_AEQE_AEID_AMP_BAD_STAG_INDEX:
- if (NES_AEQE_INBOUND_RDMA&aeq_info) {
- nesqp = nesadapter->qp_table[le32_to_cpu(
- aeqe->aeqe_words[NES_AEQE_COMP_QP_CQ_ID_IDX])-NES_FIRST_QPN];
- } else {
- /* TODO: get the actual WQE and mask off wqe index */
- context &= ~((u64)511);
- nesqp = *((struct nes_qp **)&context);
- }
- spin_lock_irqsave(&nesqp->lock, flags);
- nesqp->hw_iwarp_state = iwarp_state;
- nesqp->hw_tcp_state = tcp_state;
- nesqp->last_aeq = async_event_id;
- spin_unlock_irqrestore(&nesqp->lock, flags);
- nes_debug(NES_DBG_AEQ, "Processing an NES_AEQE_AEID_AMP_BAD_STAG_INDEX event on QP%u\n",
- nesqp->hwqp.qp_id);
- if (nesqp->ibqp.event_handler) {
- ibevent.device = nesqp->ibqp.device;
- ibevent.element.qp = &nesqp->ibqp;
- ibevent.event = IB_EVENT_QP_ACCESS_ERR;
- nesqp->ibqp.event_handler(&ibevent, nesqp->ibqp.qp_context);
- }
+
+ case NES_AEQE_AEID_LLP_TERMINATE_RECEIVED:
+ nesqp = (struct nes_qp *)(unsigned long)context;
+ nes_terminate_received(nesdev, nesqp, aeqe);
break;
+
+ case NES_AEQE_AEID_AMP_BAD_STAG_KEY:
+ case NES_AEQE_AEID_AMP_BAD_STAG_INDEX:
case NES_AEQE_AEID_AMP_UNALLOCATED_STAG:
- nesqp = *((struct nes_qp **)&context);
- spin_lock_irqsave(&nesqp->lock, flags);
- nesqp->hw_iwarp_state = iwarp_state;
- nesqp->hw_tcp_state = tcp_state;
- nesqp->last_aeq = async_event_id;
- spin_unlock_irqrestore(&nesqp->lock, flags);
- nes_debug(NES_DBG_AEQ, "Processing an NES_AEQE_AEID_AMP_UNALLOCATED_STAG event on QP%u\n",
- nesqp->hwqp.qp_id);
- if (nesqp->ibqp.event_handler) {
- ibevent.device = nesqp->ibqp.device;
- ibevent.element.qp = &nesqp->ibqp;
- ibevent.event = IB_EVENT_QP_ACCESS_ERR;
- nesqp->ibqp.event_handler(&ibevent, nesqp->ibqp.qp_context);
- }
- break;
+ case NES_AEQE_AEID_AMP_INVALID_STAG:
+ case NES_AEQE_AEID_AMP_RIGHTS_VIOLATION:
+ case NES_AEQE_AEID_AMP_INVALIDATE_NO_REMOTE_ACCESS_RIGHTS:
case NES_AEQE_AEID_PRIV_OPERATION_DENIED:
- nesqp = nesadapter->qp_table[le32_to_cpu(aeqe->aeqe_words
- [NES_AEQE_COMP_QP_CQ_ID_IDX])-NES_FIRST_QPN];
- spin_lock_irqsave(&nesqp->lock, flags);
- nesqp->hw_iwarp_state = iwarp_state;
- nesqp->hw_tcp_state = tcp_state;
- nesqp->last_aeq = async_event_id;
- spin_unlock_irqrestore(&nesqp->lock, flags);
- nes_debug(NES_DBG_AEQ, "Processing an NES_AEQE_AEID_PRIV_OPERATION_DENIED event on QP%u,"
- " nesqp = %p, AE reported %p\n",
- nesqp->hwqp.qp_id, nesqp, *((struct nes_qp **)&context));
- if (nesqp->ibqp.event_handler) {
- ibevent.device = nesqp->ibqp.device;
- ibevent.element.qp = &nesqp->ibqp;
- ibevent.event = IB_EVENT_QP_ACCESS_ERR;
- nesqp->ibqp.event_handler(&ibevent, nesqp->ibqp.qp_context);
+ case NES_AEQE_AEID_DDP_UBE_DDP_MESSAGE_TOO_LONG_FOR_AVAILABLE_BUFFER:
+ case NES_AEQE_AEID_AMP_BOUNDS_VIOLATION:
+ case NES_AEQE_AEID_AMP_TO_WRAP:
+ nesqp = (struct nes_qp *)(unsigned long)context;
+ nes_terminate_connection(nesdev, nesqp, aeqe, IB_EVENT_QP_ACCESS_ERR);
+ break;
+
+ case NES_AEQE_AEID_LLP_SEGMENT_TOO_LARGE:
+ case NES_AEQE_AEID_LLP_SEGMENT_TOO_SMALL:
+ case NES_AEQE_AEID_DDP_UBE_INVALID_MO:
+ case NES_AEQE_AEID_DDP_UBE_INVALID_QN:
+ nesqp = (struct nes_qp *)(unsigned long)context;
+ if (iwarp_opcode(nesqp, aeq_info) > IWARP_OPCODE_TERM) {
+ aeq_info &= 0xffff0000;
+ aeq_info |= NES_AEQE_AEID_RDMAP_ROE_UNEXPECTED_OPCODE;
+ aeqe->aeqe_words[NES_AEQE_MISC_IDX] = cpu_to_le32(aeq_info);
}
+
+ case NES_AEQE_AEID_RDMAP_ROE_BAD_LLP_CLOSE:
+ case NES_AEQE_AEID_LLP_TOO_MANY_RETRIES:
+ case NES_AEQE_AEID_DDP_UBE_INVALID_MSN_NO_BUFFER_AVAILABLE:
+ case NES_AEQE_AEID_LLP_RECEIVED_MPA_CRC_ERROR:
+ case NES_AEQE_AEID_AMP_BAD_QP:
+ case NES_AEQE_AEID_LLP_RECEIVED_MARKER_AND_LENGTH_FIELDS_DONT_MATCH:
+ case NES_AEQE_AEID_DDP_LCE_LOCAL_CATASTROPHIC:
+ case NES_AEQE_AEID_DDP_NO_L_BIT:
+ case NES_AEQE_AEID_DDP_INVALID_MSN_GAP_IN_MSN:
+ case NES_AEQE_AEID_DDP_INVALID_MSN_RANGE_IS_NOT_VALID:
+ case NES_AEQE_AEID_DDP_UBE_INVALID_DDP_VERSION:
+ case NES_AEQE_AEID_RDMAP_ROE_INVALID_RDMAP_VERSION:
+ case NES_AEQE_AEID_RDMAP_ROE_UNEXPECTED_OPCODE:
+ case NES_AEQE_AEID_AMP_BAD_PD:
+ case NES_AEQE_AEID_AMP_FASTREG_SHARED:
+ case NES_AEQE_AEID_AMP_FASTREG_VALID_STAG:
+ case NES_AEQE_AEID_AMP_FASTREG_MW_STAG:
+ case NES_AEQE_AEID_AMP_FASTREG_INVALID_RIGHTS:
+ case NES_AEQE_AEID_AMP_FASTREG_PBL_TABLE_OVERFLOW:
+ case NES_AEQE_AEID_AMP_FASTREG_INVALID_LENGTH:
+ case NES_AEQE_AEID_AMP_INVALIDATE_SHARED:
+ case NES_AEQE_AEID_AMP_INVALIDATE_MR_WITH_BOUND_WINDOWS:
+ case NES_AEQE_AEID_AMP_MWBIND_VALID_STAG:
+ case NES_AEQE_AEID_AMP_MWBIND_OF_MR_STAG:
+ case NES_AEQE_AEID_AMP_MWBIND_TO_ZERO_BASED_STAG:
+ case NES_AEQE_AEID_AMP_MWBIND_TO_MW_STAG:
+ case NES_AEQE_AEID_AMP_MWBIND_INVALID_RIGHTS:
+ case NES_AEQE_AEID_AMP_MWBIND_INVALID_BOUNDS:
+ case NES_AEQE_AEID_AMP_MWBIND_TO_INVALID_PARENT:
+ case NES_AEQE_AEID_AMP_MWBIND_BIND_DISABLED:
+ case NES_AEQE_AEID_BAD_CLOSE:
+ case NES_AEQE_AEID_RDMA_READ_WHILE_ORD_ZERO:
+ case NES_AEQE_AEID_STAG_ZERO_INVALID:
+ case NES_AEQE_AEID_ROE_INVALID_RDMA_READ_REQUEST:
+ case NES_AEQE_AEID_ROE_INVALID_RDMA_WRITE_OR_READ_RESP:
+ nesqp = (struct nes_qp *)(unsigned long)context;
+ nes_terminate_connection(nesdev, nesqp, aeqe, IB_EVENT_QP_FATAL);
break;
+
case NES_AEQE_AEID_CQ_OPERATION_ERROR:
context <<= 1;
nes_debug(NES_DBG_AEQ, "Processing an NES_AEQE_AEID_CQ_OPERATION_ERROR event on CQ%u, %p\n",
if (resource_allocated) {
printk(KERN_ERR PFX "%s: Processing an NES_AEQE_AEID_CQ_OPERATION_ERROR event on CQ%u\n",
__func__, le32_to_cpu(aeqe->aeqe_words[NES_AEQE_COMP_QP_CQ_ID_IDX]));
+ hw_cq = (struct nes_hw_cq *)(unsigned long)context;
+ if (hw_cq) {
+ nescq = container_of(hw_cq, struct nes_cq, hw_cq);
+ if (nescq->ibcq.event_handler) {
+ ibevent.device = nescq->ibcq.device;
+ ibevent.event = IB_EVENT_CQ_ERR;
+ ibevent.element.cq = &nescq->ibcq;
+ nescq->ibcq.event_handler(&ibevent, nescq->ibcq.cq_context);
+ }
+ }
}
break;
- case NES_AEQE_AEID_DDP_UBE_DDP_MESSAGE_TOO_LONG_FOR_AVAILABLE_BUFFER:
- nesqp = nesadapter->qp_table[le32_to_cpu(
- aeqe->aeqe_words[NES_AEQE_COMP_QP_CQ_ID_IDX])-NES_FIRST_QPN];
- spin_lock_irqsave(&nesqp->lock, flags);
- nesqp->hw_iwarp_state = iwarp_state;
- nesqp->hw_tcp_state = tcp_state;
- nesqp->last_aeq = async_event_id;
- spin_unlock_irqrestore(&nesqp->lock, flags);
- nes_debug(NES_DBG_AEQ, "Processing an NES_AEQE_AEID_DDP_UBE_DDP_MESSAGE_TOO_LONG"
- "_FOR_AVAILABLE_BUFFER event on QP%u\n",
- nesqp->hwqp.qp_id);
- if (nesqp->ibqp.event_handler) {
- ibevent.device = nesqp->ibqp.device;
- ibevent.element.qp = &nesqp->ibqp;
- ibevent.event = IB_EVENT_QP_ACCESS_ERR;
- nesqp->ibqp.event_handler(&ibevent, nesqp->ibqp.qp_context);
- }
- /* tell cm to disconnect, cm will queue work to thread */
- nes_cm_disconn(nesqp);
- break;
- case NES_AEQE_AEID_DDP_UBE_INVALID_MSN_NO_BUFFER_AVAILABLE:
- nesqp = *((struct nes_qp **)&context);
- spin_lock_irqsave(&nesqp->lock, flags);
- nesqp->hw_iwarp_state = iwarp_state;
- nesqp->hw_tcp_state = tcp_state;
- nesqp->last_aeq = async_event_id;
- spin_unlock_irqrestore(&nesqp->lock, flags);
- nes_debug(NES_DBG_AEQ, "Processing an NES_AEQE_AEID_DDP_UBE_INVALID_MSN"
- "_NO_BUFFER_AVAILABLE event on QP%u\n",
- nesqp->hwqp.qp_id);
- if (nesqp->ibqp.event_handler) {
- ibevent.device = nesqp->ibqp.device;
- ibevent.element.qp = &nesqp->ibqp;
- ibevent.event = IB_EVENT_QP_FATAL;
- nesqp->ibqp.event_handler(&ibevent, nesqp->ibqp.qp_context);
- }
- /* tell cm to disconnect, cm will queue work to thread */
- nes_cm_disconn(nesqp);
- break;
- case NES_AEQE_AEID_LLP_RECEIVED_MPA_CRC_ERROR:
- nesqp = *((struct nes_qp **)&context);
- spin_lock_irqsave(&nesqp->lock, flags);
- nesqp->hw_iwarp_state = iwarp_state;
- nesqp->hw_tcp_state = tcp_state;
- nesqp->last_aeq = async_event_id;
- spin_unlock_irqrestore(&nesqp->lock, flags);
- nes_debug(NES_DBG_AEQ, "Processing an NES_AEQE_AEID_LLP_RECEIVED_MPA_CRC_ERROR"
- " event on QP%u \n Q2 Data:\n",
- nesqp->hwqp.qp_id);
- if (nesqp->ibqp.event_handler) {
- ibevent.device = nesqp->ibqp.device;
- ibevent.element.qp = &nesqp->ibqp;
- ibevent.event = IB_EVENT_QP_FATAL;
- nesqp->ibqp.event_handler(&ibevent, nesqp->ibqp.qp_context);
- }
- /* tell cm to disconnect, cm will queue work to thread */
- nes_cm_disconn(nesqp);
- break;
- /* TODO: additional AEs need to be here */
- case NES_AEQE_AEID_AMP_BOUNDS_VIOLATION:
- nesqp = *((struct nes_qp **)&context);
- spin_lock_irqsave(&nesqp->lock, flags);
- nesqp->hw_iwarp_state = iwarp_state;
- nesqp->hw_tcp_state = tcp_state;
- nesqp->last_aeq = async_event_id;
- spin_unlock_irqrestore(&nesqp->lock, flags);
- if (nesqp->ibqp.event_handler) {
- ibevent.device = nesqp->ibqp.device;
- ibevent.element.qp = &nesqp->ibqp;
- ibevent.event = IB_EVENT_QP_ACCESS_ERR;
- nesqp->ibqp.event_handler(&ibevent,
- nesqp->ibqp.qp_context);
- }
- nes_cm_disconn(nesqp);
- break;
+
default:
nes_debug(NES_DBG_AEQ, "Processing an iWARP related AE for QP, misc = 0x%04X\n",
async_event_id);
}
-
/**
* nes_iwarp_ce_handler
*/
{
struct nes_cqp_request *cqp_request;
struct nes_hw_cqp_wqe *cqp_wqe;
+ u32 sq_code = (NES_IWARP_CQE_MAJOR_FLUSH << 16) | NES_IWARP_CQE_MINOR_FLUSH;
+ u32 rq_code = (NES_IWARP_CQE_MAJOR_FLUSH << 16) | NES_IWARP_CQE_MINOR_FLUSH;
int ret;
cqp_request = nes_get_cqp_request(nesdev);
cqp_wqe = &cqp_request->cqp_wqe;
nes_fill_init_cqp_wqe(cqp_wqe, nesdev);
+ /* If wqe in error was identified, set code to be put into cqe */
+ if ((nesqp->term_sq_flush_code) && (which_wq & NES_CQP_FLUSH_SQ)) {
+ which_wq |= NES_CQP_FLUSH_MAJ_MIN;
+ sq_code = (CQE_MAJOR_DRV << 16) | nesqp->term_sq_flush_code;
+ nesqp->term_sq_flush_code = 0;
+ }
+
+ if ((nesqp->term_rq_flush_code) && (which_wq & NES_CQP_FLUSH_RQ)) {
+ which_wq |= NES_CQP_FLUSH_MAJ_MIN;
+ rq_code = (CQE_MAJOR_DRV << 16) | nesqp->term_rq_flush_code;
+ nesqp->term_rq_flush_code = 0;
+ }
+
+ if (which_wq & NES_CQP_FLUSH_MAJ_MIN) {
+ cqp_wqe->wqe_words[NES_CQP_QP_WQE_FLUSH_SQ_CODE] = cpu_to_le32(sq_code);
+ cqp_wqe->wqe_words[NES_CQP_QP_WQE_FLUSH_RQ_CODE] = cpu_to_le32(rq_code);
+ }
+
cqp_wqe->wqe_words[NES_CQP_WQE_OPCODE_IDX] =
cpu_to_le32(NES_CQP_FLUSH_WQES | which_wq);
cqp_wqe->wqe_words[NES_CQP_WQE_ID_IDX] = cpu_to_le32(nesqp->hwqp.qp_id);
};
#define NES_CQP_OP_IWARP_STATE_SHIFT 28
+#define NES_CQP_OP_TERMLEN_SHIFT 28
enum nes_cqp_qp_bits {
NES_CQP_QP_ARP_VALID = (1<<8),
NES_CQP_QP_IWARP_STATE_TERMINATE = (5<<NES_CQP_OP_IWARP_STATE_SHIFT),
NES_CQP_QP_IWARP_STATE_ERROR = (6<<NES_CQP_OP_IWARP_STATE_SHIFT),
NES_CQP_QP_IWARP_STATE_MASK = (7<<NES_CQP_OP_IWARP_STATE_SHIFT),
+ NES_CQP_QP_TERM_DONT_SEND_FIN = (1<<24),
+ NES_CQP_QP_TERM_DONT_SEND_TERM_MSG = (1<<25),
NES_CQP_QP_RESET = (1<<31),
};
enum nes_cqp_qp_wqe_word_idx {
NES_CQP_QP_WQE_CONTEXT_LOW_IDX = 6,
NES_CQP_QP_WQE_CONTEXT_HIGH_IDX = 7,
+ NES_CQP_QP_WQE_FLUSH_SQ_CODE = 8,
+ NES_CQP_QP_WQE_FLUSH_RQ_CODE = 9,
NES_CQP_QP_WQE_NEW_MSS_IDX = 15,
};
enum nes_cqp_flush_bits {
NES_CQP_FLUSH_SQ = (1<<30),
NES_CQP_FLUSH_RQ = (1<<31),
+ NES_CQP_FLUSH_MAJ_MIN = (1<<28),
};
enum nes_cqe_opcode_bits {
NES_AEQE_INBOUND_RDMA = (1<<19),
NES_AEQE_IWARP_STATE_MASK = (7<<20),
NES_AEQE_TCP_STATE_MASK = (0xf<<24),
+ NES_AEQE_Q2_DATA_WRITTEN = (0x3<<28),
NES_AEQE_VALID = (1<<31),
};
#define NES_AEQE_IWARP_STATE_SHIFT 20
#define NES_AEQE_TCP_STATE_SHIFT 24
+#define NES_AEQE_Q2_DATA_ETHERNET (1<<28)
+#define NES_AEQE_Q2_DATA_MPA (1<<29)
enum nes_aeqe_iwarp_state {
NES_AEQE_IWARP_STATE_NON_EXISTANT = 0,
NES_IWARP_SQ_OP_NOP = 12,
};
+enum nes_iwarp_cqe_major_code {
+ NES_IWARP_CQE_MAJOR_FLUSH = 1,
+ NES_IWARP_CQE_MAJOR_DRV = 0x8000
+};
+
+enum nes_iwarp_cqe_minor_code {
+ NES_IWARP_CQE_MINOR_FLUSH = 1
+};
+
#define NES_EEPROM_READ_REQUEST (1<<16)
#define NES_MAC_ADDR_VALID (1<<20)
u8 netdev_max; /* from host nic address count in EEPROM */
u8 port_count;
u8 virtwq;
+ u8 send_term_ok;
u8 et_use_adaptive_rx_coalesce;
u8 adapter_fcn_count;
u8 pft_mcast_map[NES_PFT_SIZE];
u32 num_pd;
};
+enum nes_hdrct_flags {
+ DDP_LEN_FLAG = 0x80,
+ DDP_HDR_FLAG = 0x40,
+ RDMA_HDR_FLAG = 0x20
+};
+
+enum nes_term_layers {
+ LAYER_RDMA = 0,
+ LAYER_DDP = 1,
+ LAYER_MPA = 2
+};
+
+enum nes_term_error_types {
+ RDMAP_CATASTROPHIC = 0,
+ RDMAP_REMOTE_PROT = 1,
+ RDMAP_REMOTE_OP = 2,
+ DDP_CATASTROPHIC = 0,
+ DDP_TAGGED_BUFFER = 1,
+ DDP_UNTAGGED_BUFFER = 2,
+ DDP_LLP = 3
+};
+
+enum nes_term_rdma_errors {
+ RDMAP_INV_STAG = 0x00,
+ RDMAP_INV_BOUNDS = 0x01,
+ RDMAP_ACCESS = 0x02,
+ RDMAP_UNASSOC_STAG = 0x03,
+ RDMAP_TO_WRAP = 0x04,
+ RDMAP_INV_RDMAP_VER = 0x05,
+ RDMAP_UNEXPECTED_OP = 0x06,
+ RDMAP_CATASTROPHIC_LOCAL = 0x07,
+ RDMAP_CATASTROPHIC_GLOBAL = 0x08,
+ RDMAP_CANT_INV_STAG = 0x09,
+ RDMAP_UNSPECIFIED = 0xff
+};
+
+enum nes_term_ddp_errors {
+ DDP_CATASTROPHIC_LOCAL = 0x00,
+ DDP_TAGGED_INV_STAG = 0x00,
+ DDP_TAGGED_BOUNDS = 0x01,
+ DDP_TAGGED_UNASSOC_STAG = 0x02,
+ DDP_TAGGED_TO_WRAP = 0x03,
+ DDP_TAGGED_INV_DDP_VER = 0x04,
+ DDP_UNTAGGED_INV_QN = 0x01,
+ DDP_UNTAGGED_INV_MSN_NO_BUF = 0x02,
+ DDP_UNTAGGED_INV_MSN_RANGE = 0x03,
+ DDP_UNTAGGED_INV_MO = 0x04,
+ DDP_UNTAGGED_INV_TOO_LONG = 0x05,
+ DDP_UNTAGGED_INV_DDP_VER = 0x06
+};
+
+enum nes_term_mpa_errors {
+ MPA_CLOSED = 0x01,
+ MPA_CRC = 0x02,
+ MPA_MARKER = 0x03,
+ MPA_REQ_RSP = 0x04,
+};
+
+struct nes_terminate_hdr {
+ u8 layer_etype;
+ u8 error_code;
+ u8 hdrct;
+ u8 rsvd;
+};
+
+/* Used to determine how to fill in terminate error codes */
+#define IWARP_OPCODE_WRITE 0
+#define IWARP_OPCODE_READREQ 1
+#define IWARP_OPCODE_READRSP 2
+#define IWARP_OPCODE_SEND 3
+#define IWARP_OPCODE_SEND_INV 4
+#define IWARP_OPCODE_SEND_SE 5
+#define IWARP_OPCODE_SEND_SE_INV 6
+#define IWARP_OPCODE_TERM 7
+
+/* These values are used only during terminate processing */
+#define TERM_DDP_LEN_TAGGED 14
+#define TERM_DDP_LEN_UNTAGGED 18
+#define TERM_RDMA_LEN 28
+#define RDMA_OPCODE_MASK 0x0f
+#define RDMA_READ_REQ_OPCODE 1
+#define BAD_FRAME_OFFSET 64
+#define CQE_MAJOR_DRV 0x8000
+
#define nes_vlan_rx vlan_hwaccel_receive_skb
#define nes_netif_rx netif_receive_skb
} else if (((major_ver == 2) && (minor_ver > 21)) || ((major_ver > 2) && (major_ver != 255))) {
nesadapter->virtwq = 1;
}
+ if (((major_ver == 3) && (minor_ver >= 16)) || (major_ver > 3))
+ nesadapter->send_term_ok = 1;
+
nesadapter->firmware_version = (((u32)(u8)(eeprom_data>>8)) << 16) +
(u32)((u8)eeprom_data);
spin_unlock_irqrestore(&nesdev->cqp.lock, flags);
}
if (cqp_request == NULL) {
- cqp_request = kzalloc(sizeof(struct nes_cqp_request), GFP_KERNEL);
+ cqp_request = kzalloc(sizeof(struct nes_cqp_request), GFP_ATOMIC);
if (cqp_request) {
cqp_request->dynamic = 1;
INIT_LIST_HEAD(&cqp_request->list);
*/
static int nes_query_port(struct ib_device *ibdev, u8 port, struct ib_port_attr *props)
{
+ struct nes_vnic *nesvnic = to_nesvnic(ibdev);
+ struct net_device *netdev = nesvnic->netdev;
+
memset(props, 0, sizeof(*props));
- props->max_mtu = IB_MTU_2048;
- props->active_mtu = IB_MTU_2048;
+ props->max_mtu = IB_MTU_4096;
+
+ if (netdev->mtu >= 4096)
+ props->active_mtu = IB_MTU_4096;
+ else if (netdev->mtu >= 2048)
+ props->active_mtu = IB_MTU_2048;
+ else if (netdev->mtu >= 1024)
+ props->active_mtu = IB_MTU_1024;
+ else if (netdev->mtu >= 512)
+ props->active_mtu = IB_MTU_512;
+ else
+ props->active_mtu = IB_MTU_256;
+
props->lid = 1;
props->lmc = 0;
props->sm_lid = 0;
props->sm_sl = 0;
- props->state = IB_PORT_ACTIVE;
+ if (nesvnic->linkup)
+ props->state = IB_PORT_ACTIVE;
+ else
+ props->state = IB_PORT_DOWN;
props->phys_state = 0;
props->port_cap_flags = IB_PORT_CM_SUP | IB_PORT_REINIT_SUP |
IB_PORT_VENDOR_CLASS_SUP | IB_PORT_BOOT_MGMT_SUP;
}
+/**
+ * nes_clean_cq
+ */
+static void nes_clean_cq(struct nes_qp *nesqp, struct nes_cq *nescq)
+{
+ u32 cq_head;
+ u32 lo;
+ u32 hi;
+ u64 u64temp;
+ unsigned long flags = 0;
+
+ spin_lock_irqsave(&nescq->lock, flags);
+
+ cq_head = nescq->hw_cq.cq_head;
+ while (le32_to_cpu(nescq->hw_cq.cq_vbase[cq_head].cqe_words[NES_CQE_OPCODE_IDX]) & NES_CQE_VALID) {
+ rmb();
+ lo = le32_to_cpu(nescq->hw_cq.cq_vbase[cq_head].cqe_words[NES_CQE_COMP_COMP_CTX_LOW_IDX]);
+ hi = le32_to_cpu(nescq->hw_cq.cq_vbase[cq_head].cqe_words[NES_CQE_COMP_COMP_CTX_HIGH_IDX]);
+ u64temp = (((u64)hi) << 32) | ((u64)lo);
+ u64temp &= ~(NES_SW_CONTEXT_ALIGN-1);
+ if (u64temp == (u64)(unsigned long)nesqp) {
+ /* Zero the context value so cqe will be ignored */
+ nescq->hw_cq.cq_vbase[cq_head].cqe_words[NES_CQE_COMP_COMP_CTX_LOW_IDX] = 0;
+ nescq->hw_cq.cq_vbase[cq_head].cqe_words[NES_CQE_COMP_COMP_CTX_HIGH_IDX] = 0;
+ }
+
+ if (++cq_head >= nescq->hw_cq.cq_size)
+ cq_head = 0;
+ }
+
+ spin_unlock_irqrestore(&nescq->lock, flags);
+}
+
+
/**
* nes_destroy_qp
*/
static int nes_destroy_qp(struct ib_qp *ibqp)
{
struct nes_qp *nesqp = to_nesqp(ibqp);
- /* struct nes_vnic *nesvnic = to_nesvnic(ibqp->device); */
struct nes_ucontext *nes_ucontext;
struct ib_qp_attr attr;
struct iw_cm_id *cm_id;
nes_debug(NES_DBG_QP, "OFA CM event_handler returned, ret=%d\n", ret);
}
-
if (nesqp->user_mode) {
if ((ibqp->uobject)&&(ibqp->uobject->context)) {
nes_ucontext = to_nesucontext(ibqp->uobject->context);
}
if (nesqp->pbl_pbase)
kunmap(nesqp->page);
+ } else {
+ /* Clean any pending completions from the cq(s) */
+ if (nesqp->nesscq)
+ nes_clean_cq(nesqp, nesqp->nesscq);
+
+ if ((nesqp->nesrcq) && (nesqp->nesrcq != nesqp->nesscq))
+ nes_clean_cq(nesqp, nesqp->nesrcq);
}
nes_rem_ref(&nesqp->ibqp);
* nes_hw_modify_qp
*/
int nes_hw_modify_qp(struct nes_device *nesdev, struct nes_qp *nesqp,
- u32 next_iwarp_state, u32 wait_completion)
+ u32 next_iwarp_state, u32 termlen, u32 wait_completion)
{
struct nes_hw_cqp_wqe *cqp_wqe;
/* struct iw_cm_id *cm_id = nesqp->cm_id; */
set_wqe_32bit_value(cqp_wqe->wqe_words, NES_CQP_WQE_ID_IDX, nesqp->hwqp.qp_id);
set_wqe_64bit_value(cqp_wqe->wqe_words, NES_CQP_QP_WQE_CONTEXT_LOW_IDX, (u64)nesqp->nesqp_context_pbase);
+ /* If sending a terminate message, fill in the length (in words) */
+ if (((next_iwarp_state & NES_CQP_QP_IWARP_STATE_MASK) == NES_CQP_QP_IWARP_STATE_TERMINATE) &&
+ !(next_iwarp_state & NES_CQP_QP_TERM_DONT_SEND_TERM_MSG)) {
+ termlen = ((termlen + 3) >> 2) << NES_CQP_OP_TERMLEN_SHIFT;
+ set_wqe_32bit_value(cqp_wqe->wqe_words, NES_CQP_QP_WQE_NEW_MSS_IDX, termlen);
+ }
+
atomic_set(&cqp_request->refcount, 2);
nes_post_cqp_request(nesdev, cqp_request);
}
nes_debug(NES_DBG_MOD_QP, "QP%u: new state = error\n",
nesqp->hwqp.qp_id);
+ if (nesqp->term_flags)
+ del_timer(&nesqp->terminate_timer);
+
next_iwarp_state = NES_CQP_QP_IWARP_STATE_ERROR;
/* next_iwarp_state = (NES_CQP_QP_IWARP_STATE_TERMINATE | 0x02000000); */
if (nesqp->hte_added) {
if (issue_modify_qp) {
nes_debug(NES_DBG_MOD_QP, "call nes_hw_modify_qp\n");
- ret = nes_hw_modify_qp(nesdev, nesqp, next_iwarp_state, 1);
+ ret = nes_hw_modify_qp(nesdev, nesqp, next_iwarp_state, 0, 1);
if (ret)
nes_debug(NES_DBG_MOD_QP, "nes_hw_modify_qp (next_iwarp_state = 0x%08X)"
" failed for QP%u.\n",
head = nesqp->hwqp.sq_head;
while (ib_wr) {
+ /* Check for QP error */
+ if (nesqp->term_flags) {
+ err = -EINVAL;
+ break;
+ }
+
/* Check for SQ overflow */
if (((head + (2 * qsize) - nesqp->hwqp.sq_tail) % qsize) == (qsize - 1)) {
err = -EINVAL;
head = nesqp->hwqp.rq_head;
while (ib_wr) {
+ /* Check for QP error */
+ if (nesqp->term_flags) {
+ err = -EINVAL;
+ break;
+ }
+
if (ib_wr->num_sge > nesdev->nesadapter->max_sge) {
err = -EINVAL;
break;
{
u64 u64temp;
u64 wrid;
- /* u64 u64temp; */
unsigned long flags = 0;
struct nes_vnic *nesvnic = to_nesvnic(ibcq->device);
struct nes_device *nesdev = nesvnic->nesdev;
struct nes_qp *nesqp;
struct nes_hw_cqe cqe;
u32 head;
- u32 wq_tail;
+ u32 wq_tail = 0;
u32 cq_size;
u32 cqe_count = 0;
u32 wqe_index;
u32 u32temp;
- /* u32 counter; */
+ u32 move_cq_head = 1;
+ u32 err_code;
nes_debug(NES_DBG_CQ, "\n");
cq_size = nescq->hw_cq.cq_size;
while (cqe_count < num_entries) {
- if (le32_to_cpu(nescq->hw_cq.cq_vbase[head].cqe_words[NES_CQE_OPCODE_IDX]) &
- NES_CQE_VALID) {
- /*
- * Make sure we read CQ entry contents *after*
- * we've checked the valid bit.
- */
- rmb();
-
- cqe = nescq->hw_cq.cq_vbase[head];
- nescq->hw_cq.cq_vbase[head].cqe_words[NES_CQE_OPCODE_IDX] = 0;
- u32temp = le32_to_cpu(cqe.cqe_words[NES_CQE_COMP_COMP_CTX_LOW_IDX]);
- wqe_index = u32temp &
- (nesdev->nesadapter->max_qp_wr - 1);
- u32temp &= ~(NES_SW_CONTEXT_ALIGN-1);
- /* parse CQE, get completion context from WQE (either rq or sq */
- u64temp = (((u64)(le32_to_cpu(cqe.cqe_words[NES_CQE_COMP_COMP_CTX_HIGH_IDX])))<<32) |
- ((u64)u32temp);
- nesqp = *((struct nes_qp **)&u64temp);
+ if ((le32_to_cpu(nescq->hw_cq.cq_vbase[head].cqe_words[NES_CQE_OPCODE_IDX]) &
+ NES_CQE_VALID) == 0)
+ break;
+
+ /*
+ * Make sure we read CQ entry contents *after*
+ * we've checked the valid bit.
+ */
+ rmb();
+
+ cqe = nescq->hw_cq.cq_vbase[head];
+ u32temp = le32_to_cpu(cqe.cqe_words[NES_CQE_COMP_COMP_CTX_LOW_IDX]);
+ wqe_index = u32temp & (nesdev->nesadapter->max_qp_wr - 1);
+ u32temp &= ~(NES_SW_CONTEXT_ALIGN-1);
+ /* parse CQE, get completion context from WQE (either rq or sq) */
+ u64temp = (((u64)(le32_to_cpu(cqe.cqe_words[NES_CQE_COMP_COMP_CTX_HIGH_IDX])))<<32) |
+ ((u64)u32temp);
+
+ if (u64temp) {
+ nesqp = (struct nes_qp *)(unsigned long)u64temp;
memset(entry, 0, sizeof *entry);
if (cqe.cqe_words[NES_CQE_ERROR_CODE_IDX] == 0) {
entry->status = IB_WC_SUCCESS;
} else {
- entry->status = IB_WC_WR_FLUSH_ERR;
+ err_code = le32_to_cpu(cqe.cqe_words[NES_CQE_ERROR_CODE_IDX]);
+ if (NES_IWARP_CQE_MAJOR_DRV == (err_code >> 16)) {
+ entry->status = err_code & 0x0000ffff;
+
+ /* The rest of the cqe's will be marked as flushed */
+ nescq->hw_cq.cq_vbase[head].cqe_words[NES_CQE_ERROR_CODE_IDX] =
+ cpu_to_le32((NES_IWARP_CQE_MAJOR_FLUSH << 16) |
+ NES_IWARP_CQE_MINOR_FLUSH);
+ } else
+ entry->status = IB_WC_WR_FLUSH_ERR;
}
entry->qp = &nesqp->ibqp;
if (le32_to_cpu(cqe.cqe_words[NES_CQE_OPCODE_IDX]) & NES_CQE_SQ) {
if (nesqp->skip_lsmm) {
nesqp->skip_lsmm = 0;
- wq_tail = nesqp->hwqp.sq_tail++;
+ nesqp->hwqp.sq_tail++;
}
/* Working on a SQ Completion*/
- wq_tail = wqe_index;
- nesqp->hwqp.sq_tail = (wqe_index+1)&(nesqp->hwqp.sq_size - 1);
- wrid = (((u64)(cpu_to_le32((u32)nesqp->hwqp.sq_vbase[wq_tail].
+ wrid = (((u64)(cpu_to_le32((u32)nesqp->hwqp.sq_vbase[wqe_index].
wqe_words[NES_IWARP_SQ_WQE_COMP_SCRATCH_HIGH_IDX]))) << 32) |
- ((u64)(cpu_to_le32((u32)nesqp->hwqp.sq_vbase[wq_tail].
+ ((u64)(cpu_to_le32((u32)nesqp->hwqp.sq_vbase[wqe_index].
wqe_words[NES_IWARP_SQ_WQE_COMP_SCRATCH_LOW_IDX])));
- entry->byte_len = le32_to_cpu(nesqp->hwqp.sq_vbase[wq_tail].
+ entry->byte_len = le32_to_cpu(nesqp->hwqp.sq_vbase[wqe_index].
wqe_words[NES_IWARP_SQ_WQE_TOTAL_PAYLOAD_IDX]);
- switch (le32_to_cpu(nesqp->hwqp.sq_vbase[wq_tail].
+ switch (le32_to_cpu(nesqp->hwqp.sq_vbase[wqe_index].
wqe_words[NES_IWARP_SQ_WQE_MISC_IDX]) & 0x3f) {
case NES_IWARP_SQ_OP_RDMAW:
nes_debug(NES_DBG_CQ, "Operation = RDMA WRITE.\n");
case NES_IWARP_SQ_OP_RDMAR:
nes_debug(NES_DBG_CQ, "Operation = RDMA READ.\n");
entry->opcode = IB_WC_RDMA_READ;
- entry->byte_len = le32_to_cpu(nesqp->hwqp.sq_vbase[wq_tail].
+ entry->byte_len = le32_to_cpu(nesqp->hwqp.sq_vbase[wqe_index].
wqe_words[NES_IWARP_SQ_WQE_RDMA_LENGTH_IDX]);
break;
case NES_IWARP_SQ_OP_SENDINV:
entry->opcode = IB_WC_SEND;
break;
}
+
+ nesqp->hwqp.sq_tail = (wqe_index+1)&(nesqp->hwqp.sq_size - 1);
+ if ((entry->status != IB_WC_SUCCESS) && (nesqp->hwqp.sq_tail != nesqp->hwqp.sq_head)) {
+ move_cq_head = 0;
+ wq_tail = nesqp->hwqp.sq_tail;
+ }
} else {
/* Working on a RQ Completion*/
- wq_tail = wqe_index;
- nesqp->hwqp.rq_tail = (wqe_index+1)&(nesqp->hwqp.rq_size - 1);
entry->byte_len = le32_to_cpu(cqe.cqe_words[NES_CQE_PAYLOAD_LENGTH_IDX]);
- wrid = ((u64)(le32_to_cpu(nesqp->hwqp.rq_vbase[wq_tail].wqe_words[NES_IWARP_RQ_WQE_COMP_SCRATCH_LOW_IDX]))) |
- ((u64)(le32_to_cpu(nesqp->hwqp.rq_vbase[wq_tail].wqe_words[NES_IWARP_RQ_WQE_COMP_SCRATCH_HIGH_IDX]))<<32);
+ wrid = ((u64)(le32_to_cpu(nesqp->hwqp.rq_vbase[wqe_index].wqe_words[NES_IWARP_RQ_WQE_COMP_SCRATCH_LOW_IDX]))) |
+ ((u64)(le32_to_cpu(nesqp->hwqp.rq_vbase[wqe_index].wqe_words[NES_IWARP_RQ_WQE_COMP_SCRATCH_HIGH_IDX]))<<32);
entry->opcode = IB_WC_RECV;
+
+ nesqp->hwqp.rq_tail = (wqe_index+1)&(nesqp->hwqp.rq_size - 1);
+ if ((entry->status != IB_WC_SUCCESS) && (nesqp->hwqp.rq_tail != nesqp->hwqp.rq_head)) {
+ move_cq_head = 0;
+ wq_tail = nesqp->hwqp.rq_tail;
+ }
}
+
entry->wr_id = wrid;
+ entry++;
+ cqe_count++;
+ }
+ if (move_cq_head) {
+ nescq->hw_cq.cq_vbase[head].cqe_words[NES_CQE_OPCODE_IDX] = 0;
if (++head >= cq_size)
head = 0;
- cqe_count++;
nescq->polled_completions++;
+
if ((nescq->polled_completions > (cq_size / 2)) ||
(nescq->polled_completions == 255)) {
nes_debug(NES_DBG_CQ, "CQ%u Issuing CQE Allocate since more than half of cqes"
- " are pending %u of %u.\n",
- nescq->hw_cq.cq_number, nescq->polled_completions, cq_size);
+ " are pending %u of %u.\n",
+ nescq->hw_cq.cq_number, nescq->polled_completions, cq_size);
nes_write32(nesdev->regs+NES_CQE_ALLOC,
- nescq->hw_cq.cq_number | (nescq->polled_completions << 16));
+ nescq->hw_cq.cq_number | (nescq->polled_completions << 16));
nescq->polled_completions = 0;
}
- entry++;
- } else
- break;
+ } else {
+ /* Update the wqe index and set status to flush */
+ wqe_index = le32_to_cpu(cqe.cqe_words[NES_CQE_COMP_COMP_CTX_LOW_IDX]);
+ wqe_index = (wqe_index & (~(nesdev->nesadapter->max_qp_wr - 1))) | wq_tail;
+ nescq->hw_cq.cq_vbase[head].cqe_words[NES_CQE_COMP_COMP_CTX_LOW_IDX] =
+ cpu_to_le32(wqe_index);
+ move_cq_head = 1; /* ready for next pass */
+ }
}
if (nescq->polled_completions) {
#define NES_MAX_USER_DB_REGIONS 4096
#define NES_MAX_USER_WQ_REGIONS 4096
+#define NES_TERM_SENT 0x01
+#define NES_TERM_RCVD 0x02
+#define NES_TERM_DONE 0x04
+
struct nes_ucontext {
struct ib_ucontext ibucontext;
struct nes_device *nesdev;
spinlock_t lock;
};
+struct disconn_work {
+ struct work_struct work;
+ struct nes_qp *nesqp;
+};
+
struct iw_cm_id;
struct ietf_mpa_frame;
void *allocated_buffer;
struct iw_cm_id *cm_id;
struct workqueue_struct *wq;
- struct work_struct disconn_work;
struct nes_cq *nesscq;
struct nes_cq *nesrcq;
struct nes_pd *nespd;
void *pbl_vbase;
dma_addr_t pbl_pbase;
struct page *page;
+ struct timer_list terminate_timer;
+ enum ib_event_type terminate_eventtype;
wait_queue_head_t kick_waitq;
u16 in_disconnect;
u16 private_data_len;
+ u16 term_sq_flush_code;
+ u16 term_rq_flush_code;
u8 active_conn;
u8 skip_lsmm;
u8 user_mode;
u8 hw_iwarp_state;
u8 flush_issued;
u8 hw_tcp_state;
- u8 disconn_pending;
+ u8 term_flags;
u8 destroyed;
};
#endif /* NES_VERBS_H */
*/
#include <rdma/ib_cm.h>
-#include <rdma/ib_cache.h>
#include <net/dst.h>
#include <net/icmp.h>
#include <linux/icmpv6.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
-#include <rdma/ib_cache.h>
#include <linux/ip.h>
#include <linux/tcp.h>
skb_queue_len(&neigh->queue));
goto err_drop;
}
- } else
+ } else {
+ spin_unlock_irqrestore(&priv->lock, flags);
ipoib_send(dev, skb, path->ah, IPOIB_QPN(skb_dst(skb)->neighbour->ha));
+ return;
+ }
} else {
neigh->ah = NULL;
ipoib_dbg(priv, "Send unicast ARP to %04x\n",
be16_to_cpu(path->pathrec.dlid));
+ spin_unlock_irqrestore(&priv->lock, flags);
ipoib_send(dev, skb, path->ah, IPOIB_QPN(phdr->hwaddr));
+ return;
} else if ((path->query || !path_rec_start(dev, path)) &&
skb_queue_len(&path->queue) < IPOIB_MAX_PATH_REC_QUEUE) {
/* put pseudoheader back on for next time */
}
}
+ spin_unlock_irqrestore(&priv->lock, flags);
ipoib_send(dev, skb, mcast->ah, IB_MULTICAST_QPN);
+ return;
}
unlock:
}
}
+static int ipoib_mcast_addr_is_valid(const u8 *addr, unsigned int addrlen,
+ const u8 *broadcast)
+{
+ if (addrlen != INFINIBAND_ALEN)
+ return 0;
+ /* reserved QPN, prefix, scope */
+ if (memcmp(addr, broadcast, 6))
+ return 0;
+ /* signature lower, pkey */
+ if (memcmp(addr + 7, broadcast + 7, 3))
+ return 0;
+ return 1;
+}
+
void ipoib_mcast_restart_task(struct work_struct *work)
{
struct ipoib_dev_priv *priv =
for (mclist = dev->mc_list; mclist; mclist = mclist->next) {
union ib_gid mgid;
+ if (!ipoib_mcast_addr_is_valid(mclist->dmi_addr,
+ mclist->dmi_addrlen,
+ dev->broadcast))
+ continue;
+
memcpy(mgid.raw, mclist->dmi_addr + 4, sizeof mgid);
mcast = __ipoib_mcast_find(dev, &mgid);
p, compat_mode);
if (_IOC_NR(cmd) == _IOC_NR(EVIOCGNAME(0)))
- return str_to_user(dev_name(&evdev->dev),
- _IOC_SIZE(cmd), p);
+ return str_to_user(dev->name, _IOC_SIZE(cmd), p);
if (_IOC_NR(cmd) == _IOC_NR(EVIOCGPHYS(0)))
return str_to_user(dev->phys, _IOC_SIZE(cmd), p);
unsigned int cmd, void __user *argp)
{
struct input_dev *dev = joydev->handle.dev;
+ size_t len;
int i, j;
+ const char *name;
+ /* Process fixed-sized commands. */
switch (cmd) {
case JS_SET_CAL:
return copy_to_user(argp, joydev->corr,
sizeof(joydev->corr[0]) * joydev->nabs) ? -EFAULT : 0;
- case JSIOCSAXMAP:
- if (copy_from_user(joydev->abspam, argp,
- sizeof(__u8) * (ABS_MAX + 1)))
+ }
+
+ /*
+ * Process variable-sized commands (the axis and button map commands
+ * are considered variable-sized to decouple them from the values of
+ * ABS_MAX and KEY_MAX).
+ */
+ switch (cmd & ~IOCSIZE_MASK) {
+
+ case (JSIOCSAXMAP & ~IOCSIZE_MASK):
+ len = min_t(size_t, _IOC_SIZE(cmd), sizeof(joydev->abspam));
+ /*
+ * FIXME: we should not copy into our axis map before
+ * validating the data.
+ */
+ if (copy_from_user(joydev->abspam, argp, len))
return -EFAULT;
for (i = 0; i < joydev->nabs; i++) {
}
return 0;
- case JSIOCGAXMAP:
- return copy_to_user(argp, joydev->abspam,
- sizeof(__u8) * (ABS_MAX + 1)) ? -EFAULT : 0;
-
- case JSIOCSBTNMAP:
- if (copy_from_user(joydev->keypam, argp,
- sizeof(__u16) * (KEY_MAX - BTN_MISC + 1)))
+ case (JSIOCGAXMAP & ~IOCSIZE_MASK):
+ len = min_t(size_t, _IOC_SIZE(cmd), sizeof(joydev->abspam));
+ return copy_to_user(argp, joydev->abspam, len) ? -EFAULT : 0;
+
+ case (JSIOCSBTNMAP & ~IOCSIZE_MASK):
+ len = min_t(size_t, _IOC_SIZE(cmd), sizeof(joydev->keypam));
+ /*
+ * FIXME: we should not copy into our keymap before
+ * validating the data.
+ */
+ if (copy_from_user(joydev->keypam, argp, len))
return -EFAULT;
for (i = 0; i < joydev->nkey; i++) {
return 0;
- case JSIOCGBTNMAP:
- return copy_to_user(argp, joydev->keypam,
- sizeof(__u16) * (KEY_MAX - BTN_MISC + 1)) ? -EFAULT : 0;
+ case (JSIOCGBTNMAP & ~IOCSIZE_MASK):
+ len = min_t(size_t, _IOC_SIZE(cmd), sizeof(joydev->keypam));
+ return copy_to_user(argp, joydev->keypam, len) ? -EFAULT : 0;
- default:
- if ((cmd & ~IOCSIZE_MASK) == JSIOCGNAME(0)) {
- int len;
- const char *name = dev_name(&dev->dev);
-
- if (!name)
- return 0;
- len = strlen(name) + 1;
- if (len > _IOC_SIZE(cmd))
- len = _IOC_SIZE(cmd);
- if (copy_to_user(argp, name, len))
- return -EFAULT;
- return len;
- }
+ case JSIOCGNAME(0):
+ name = dev->name;
+ if (!name)
+ return 0;
+
+ len = min_t(size_t, _IOC_SIZE(cmd), strlen(name) + 1);
+ return copy_to_user(argp, name, len) ? -EFAULT : len;
}
+
return -EINVAL;
}
{ 0x05ef, 0x8884, "AVB Mag Turbo Force", btn_avb_wheel, abs_wheel, ff_iforce },
{ 0x05ef, 0x8888, "AVB Top Shot Force Feedback Racing Wheel", btn_avb_tw, abs_wheel, ff_iforce }, //?
{ 0x061c, 0xc0a4, "ACT LABS Force RS", btn_wheel, abs_wheel, ff_iforce }, //?
+ { 0x061c, 0xc084, "ACT LABS Force RS", btn_wheel, abs_wheel, ff_iforce },
{ 0x06f8, 0x0001, "Guillemot Race Leader Force Feedback", btn_wheel, abs_wheel, ff_iforce }, //?
{ 0x06f8, 0x0004, "Guillemot Force Feedback Racing Wheel", btn_wheel, abs_wheel, ff_iforce }, //?
{ 0x06f8, 0x0004, "Gullemot Jet Leader 3D", btn_joystick, abs_joystick, ff_iforce }, //?
{ USB_DEVICE(0x05ef, 0x8884) }, /* AVB Mag Turbo Force */
{ USB_DEVICE(0x05ef, 0x8888) }, /* AVB Top Shot FFB Racing Wheel */
{ USB_DEVICE(0x061c, 0xc0a4) }, /* ACT LABS Force RS */
+ { USB_DEVICE(0x061c, 0xc084) }, /* ACT LABS Force RS */
{ USB_DEVICE(0x06f8, 0x0001) }, /* Guillemot Race Leader Force Feedback */
{ USB_DEVICE(0x06f8, 0x0004) }, /* Guillemot Force Feedback Racing Wheel */
{ USB_DEVICE(0x06f8, 0xa302) }, /* Guillemot Jet Leader 3D */
status = urb->status;
switch (status) {
- case 0:
+ case 0:
/* success */
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d",
- __func__, status);
- return;
- default:
- dbg("%s - nonzero urb status received: %d",
- __func__, status);
- goto exit;
+ return;
+
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* this urb is terminated, clean up */
+ dbg("%s - urb shutting down with status: %d", __func__, status);
+ return;
+
+ default:
+ dbg("%s - nonzero urb status received: %d", __func__, status);
+ goto exit;
}
exit:
0xae, 0xb0, -1U
};
+/*
+ * Perform fixup for HP (Compaq) Presario R4000 R4100 R4200 that don't generate
+ * release for their volume buttons
+ */
+static unsigned int atkbd_hp_r4000_forced_release_keys[] = {
+ 0xae, 0xb0, -1U
+};
+
/*
* Samsung NC10,NC20 with Fn+F? key release not working
*/
0xb0, 0xae, -1U
};
+/*
+ * Amilo Pi 3525 key release for Fn+Volume keys not working
+ */
+static unsigned int atkbd_amilo_pi3525_forced_release_keys[] = {
+ 0x20, 0xa0, 0x2e, 0xae, 0x30, 0xb0, -1U
+};
+
/*
* Amilo Xi 3650 key release for light touch bar not working
*/
0x67, 0xed, 0x90, 0xa2, 0x99, 0xa4, 0xae, 0xb0, -1U
};
+/*
+ * Soltech TA12 system with broken key release on volume keys and mute key
+ */
+static unsigned int atkdb_soltech_ta12_forced_release_keys[] = {
+ 0xa0, 0xae, 0xb0, -1U
+};
+
/*
* atkbd_set_keycode_table() initializes keyboard's keycode table
* according to the selected scancode set
.callback = atkbd_setup_forced_release,
.driver_data = atkbd_hp_zv6100_forced_release_keys,
},
+ {
+ .ident = "HP Presario R4000",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4000"),
+ },
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_hp_r4000_forced_release_keys,
+ },
+ {
+ .ident = "HP Presario R4100",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4100"),
+ },
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_hp_r4000_forced_release_keys,
+ },
+ {
+ .ident = "HP Presario R4200",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4200"),
+ },
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_hp_r4000_forced_release_keys,
+ },
{
.ident = "Inventec Symphony",
.matches = {
.callback = atkbd_setup_forced_release,
.driver_data = atkbd_amilo_pa1510_forced_release_keys,
},
+ {
+ .ident = "Fujitsu Amilo Pi 3525",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 3525"),
+ },
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_amilo_pi3525_forced_release_keys,
+ },
{
.ident = "Fujitsu Amilo Xi 3650",
.matches = {
.callback = atkbd_setup_forced_release,
.driver_data = atkbd_amilo_xi3650_forced_release_keys,
},
+ {
+ .ident = "Soltech Corporation TA12",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Soltech Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TA12"),
+ },
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkdb_soltech_ta12_forced_release_keys,
+ },
{ }
};
const struct matrix_keypad_platform_data *pdata;
struct input_dev *input_dev;
unsigned short *keycodes;
+ unsigned int row_shift;
uint32_t last_key_state[MATRIX_MAX_COLS];
struct delayed_work work;
if ((bits_changed & (1 << row)) == 0)
continue;
- code = (row << 4) + col;
+ code = MATRIX_SCAN_CODE(row, col, keypad->row_shift);
input_event(input_dev, EV_MSC, MSC_SCAN, code);
input_report_key(input_dev,
keypad->keycodes[code],
struct matrix_keypad *keypad;
struct input_dev *input_dev;
unsigned short *keycodes;
+ unsigned int row_shift;
int i;
int err;
return -EINVAL;
}
- if (!keymap_data->max_keymap_size) {
- dev_err(&pdev->dev, "invalid keymap data supplied\n");
- return -EINVAL;
- }
+ row_shift = get_count_order(pdata->num_col_gpios);
keypad = kzalloc(sizeof(struct matrix_keypad), GFP_KERNEL);
- keycodes = kzalloc(keymap_data->max_keymap_size *
- sizeof(keypad->keycodes),
+ keycodes = kzalloc((pdata->num_row_gpios << row_shift) *
+ sizeof(*keycodes),
GFP_KERNEL);
input_dev = input_allocate_device();
if (!keypad || !keycodes || !input_dev) {
keypad->input_dev = input_dev;
keypad->pdata = pdata;
keypad->keycodes = keycodes;
+ keypad->row_shift = row_shift;
keypad->stopped = true;
INIT_DELAYED_WORK(&keypad->work, matrix_keypad_scan);
spin_lock_init(&keypad->lock);
input_dev->keycode = keycodes;
input_dev->keycodesize = sizeof(*keycodes);
- input_dev->keycodemax = keymap_data->max_keymap_size;
+ input_dev->keycodemax = pdata->num_row_gpios << keypad->row_shift;
for (i = 0; i < keymap_data->keymap_size; i++) {
unsigned int key = keymap_data->keymap[i];
unsigned int col = KEY_COL(key);
unsigned short code = KEY_VAL(key);
- keycodes[(row << 4) + col] = code;
+ keycodes[MATRIX_SCAN_CODE(row, col, row_shift)] = code;
__set_bit(code, input_dev->keybit);
}
__clear_bit(KEY_RESERVED, input_dev->keybit);
return 0;
}
-static int pcspkr_suspend(struct platform_device *dev, pm_message_t state)
+static int pcspkr_suspend(struct device *dev)
{
pcspkr_event(NULL, EV_SND, SND_BELL, 0);
pcspkr_event(NULL, EV_SND, SND_BELL, 0);
}
+static struct dev_pm_ops pcspkr_pm_ops = {
+ .suspend = pcspkr_suspend,
+};
+
static struct platform_driver pcspkr_platform_driver = {
.driver = {
.name = "pcspkr",
.owner = THIS_MODULE,
+ .pm = &pcspkr_pm_ops,
},
.probe = pcspkr_probe,
.remove = __devexit_p(pcspkr_remove),
- .suspend = pcspkr_suspend,
.shutdown = pcspkr_shutdown,
};
{ KE_END, 0 }
};
+static struct key_entry keymap_prestigio[] __initdata = {
+ { KE_KEY, 0x11, {KEY_PROG1} },
+ { KE_KEY, 0x12, {KEY_PROG2} },
+ { KE_WIFI, 0x30 },
+ { KE_KEY, 0x22, {KEY_REWIND} },
+ { KE_KEY, 0x23, {KEY_FORWARD} },
+ { KE_KEY, 0x24, {KEY_PLAYPAUSE} },
+ { KE_KEY, 0x25, {KEY_STOPCD} },
+ { KE_KEY, 0x31, {KEY_MAIL} },
+ { KE_KEY, 0x36, {KEY_WWW} },
+ { KE_END, 0 }
+};
+
+
/*
* If your machine is not here (which is currently rather likely), please send
* a list of buttons and their key codes (reported when loading this module
},
.driver_data = keymap_fs_amilo_pro_v2000
},
+ {
+ .callback = dmi_matched,
+ .ident = "Maxdata Pro 7000 DX",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "MAXDATA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Pro 7000"),
+ },
+ .driver_data = keymap_fs_amilo_pro_v2000
+ },
{
.callback = dmi_matched,
.ident = "Fujitsu N3510",
if (keymap_name != NULL) {
if (strcmp (keymap_name, "1557/MS2141") == 0)
keymap = keymap_wistron_ms2141;
+ else if (strcmp (keymap_name, "prestigio") == 0)
+ keymap = keymap_prestigio;
else if (strcmp (keymap_name, "generic") == 0)
keymap = keymap_wistron_generic;
else {
priv->tseq[3] = 0;
if (mlc->opacket & HIL_CTRL_APE) {
priv->tseq[3] |= HP_SDC_LPC_APE_IPF;
- down_trylock(&mlc->csem);
+ BUG_ON(down_trylock(&mlc->csem));
}
enqueue:
hp_sdc_enqueue_transaction(&priv->trans);
DMI_MATCH(DMI_BOARD_VERSION, "Rev E"),
},
},
+ {
+ .ident = "ASUS G1S",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer Inc."),
+ DMI_MATCH(DMI_BOARD_NAME, "G1S"),
+ DMI_MATCH(DMI_BOARD_VERSION, "1.0"),
+ },
+ },
{
/* AUX LOOP command does not raise AUX IRQ */
.ident = "ASUS P65UP5",
DMI_MATCH(DMI_PRODUCT_NAME, "Vostro1510"),
},
},
+ {
+ .ident = "Acer Aspire 5536",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5536"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "0100"),
+ },
+ },
{ }
};
return result;
}
+static int wacom_query_tablet_data(struct usb_interface *intf)
+{
+ unsigned char *rep_data;
+ int limit = 0;
+ int error;
+
+ rep_data = kmalloc(2, GFP_KERNEL);
+ if (!rep_data)
+ return -ENOMEM;
+
+ do {
+ rep_data[0] = 2;
+ rep_data[1] = 2;
+ error = usb_set_report(intf, WAC_HID_FEATURE_REPORT,
+ 2, rep_data, 2);
+ if (error >= 0)
+ error = usb_get_report(intf,
+ WAC_HID_FEATURE_REPORT, 2,
+ rep_data, 2);
+ } while ((error < 0 || rep_data[1] != 2) && limit++ < 5);
+
+ kfree(rep_data);
+
+ return error < 0 ? error : 0;
+}
+
static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct usb_device *dev = interface_to_usbdev(intf);
struct wacom_features *features;
struct input_dev *input_dev;
int error = -ENOMEM;
- char rep_data[2], limit = 0;
struct hid_descriptor *hid_desc;
wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
/*
* Ask the tablet to report tablet data if it is not a Tablet PC.
- * Repeat until it succeeds
+ * Note that if query fails it is not a hard failure.
*/
- if (wacom_wac->features->type != TABLETPC) {
- do {
- rep_data[0] = 2;
- rep_data[1] = 2;
- error = usb_set_report(intf, WAC_HID_FEATURE_REPORT,
- 2, rep_data, 2);
- if (error >= 0)
- error = usb_get_report(intf,
- WAC_HID_FEATURE_REPORT, 2,
- rep_data, 2);
- } while ((error < 0 || rep_data[1] != 2) && limit++ < 5);
- }
+ if (wacom_wac->features->type != TABLETPC)
+ wacom_query_tablet_data(intf);
usb_set_intfdata(intf, wacom);
return 0;
ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, isr);
ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0);
- if (isr & UCB_IE_TSPX) {
+ if (isr & UCB_IE_TSPX)
ucb1400_ts_irq_disable(ucb->ac97);
- enable_irq(ucb->irq);
- } else
- printk(KERN_ERR "ucb1400: unexpected IE_STATUS = %#x\n", isr);
+ else
+ dev_dbg(&ucb->ts_idev->dev, "ucb1400: unexpected IE_STATUS = %#x\n", isr);
+ enable_irq(ucb->irq);
}
static int ucb1400_ts_thread(void *_ucb)
static int ucb1400_ts_probe(struct platform_device *dev)
{
int error, x_res, y_res;
+ u16 fcsr;
struct ucb1400_ts *ucb = dev->dev.platform_data;
ucb->ts_idev = input_allocate_device();
ucb->ts_idev->evbit[0] = BIT_MASK(EV_ABS) | BIT_MASK(EV_KEY);
ucb->ts_idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+ /*
+ * Enable ADC filter to prevent horrible jitter on Colibri.
+ * This also further reduces jitter on boards where ADCSYNC
+ * pin is connected.
+ */
+ fcsr = ucb1400_reg_read(ucb->ac97, UCB_FCSR);
+ ucb1400_reg_write(ucb->ac97, UCB_FCSR, fcsr | UCB_FCSR_AVE);
+
ucb1400_adc_enable(ucb->ac97);
x_res = ucb1400_ts_read_xres(ucb);
y_res = ucb1400_ts_read_yres(ucb);
return retval;
}
+/* FIXME: This function does not have error returns */
+
static int if_chars_in_buffer(struct tty_struct *tty)
{
struct cardstate *cs;
while (!signal_pending(current)) {
struct kvec iov = {
.iov_base = recvbuf,
- .iov_len = sizeof(recvbuf),
+ .iov_len = recvbuf_size,
};
recvlen = kernel_recvmsg(socket, &msg, &iov, 1,
- sizeof(recvbuf), 0);
+ recvbuf_size, 0);
if (recvlen > 0) {
l1oip_socket_parse(hc, &sin_rx, recvbuf, recvlen);
} else {
return -ENOMEM;
l1oip_cnt = 0;
- while (type[l1oip_cnt] && l1oip_cnt < MAX_CARDS) {
+ while (l1oip_cnt < MAX_CARDS && type[l1oip_cnt]) {
switch (type[l1oip_cnt] & 0xff) {
case 1:
pri = 0;
gpio_data->inverted = !!inverted;
+ /* After inverting, we need to update the LED. */
+ schedule_work(&gpio_data->work);
+
return n;
}
static DEVICE_ATTR(inverted, 0644, gpio_trig_inverted_show,
return -EINVAL;
}
+ if (gpio_data->gpio == gpio)
+ return n;
+
if (!gpio) {
- free_irq(gpio_to_irq(gpio_data->gpio), led);
+ if (gpio_data->gpio != 0)
+ free_irq(gpio_to_irq(gpio_data->gpio), led);
+ gpio_data->gpio = 0;
return n;
}
- if (gpio_data->gpio > 0 && gpio_data->gpio != gpio)
- free_irq(gpio_to_irq(gpio_data->gpio), led);
-
- gpio_data->gpio = gpio;
ret = request_irq(gpio_to_irq(gpio), gpio_trig_irq,
IRQF_SHARED | IRQF_TRIGGER_RISING
| IRQF_TRIGGER_FALLING, "ledtrig-gpio", led);
- if (ret)
+ if (ret) {
dev_err(dev, "request_irq failed with error %d\n", ret);
+ } else {
+ if (gpio_data->gpio != 0)
+ free_irq(gpio_to_irq(gpio_data->gpio), led);
+ gpio_data->gpio = gpio;
+ }
return ret ? ret : n;
}
device_remove_file(led->dev, &dev_attr_inverted);
device_remove_file(led->dev, &dev_attr_desired_brightness);
flush_work(&gpio_data->work);
- free_irq(gpio_to_irq(gpio_data->gpio),led);
+ if (gpio_data->gpio != 0)
+ free_irq(gpio_to_irq(gpio_data->gpio), led);
kfree(gpio_data);
}
}
-/*P:400 This contains run_guest() which actually calls into the Host<->Guest
+/*P:400
+ * This contains run_guest() which actually calls into the Host<->Guest
* Switcher and analyzes the return, such as determining if the Guest wants the
- * Host to do something. This file also contains useful helper routines. :*/
+ * Host to do something. This file also contains useful helper routines.
+:*/
#include <linux/module.h>
#include <linux/stringify.h>
#include <linux/stddef.h>
/* This One Big lock protects all inter-guest data structures. */
DEFINE_MUTEX(lguest_lock);
-/*H:010 We need to set up the Switcher at a high virtual address. Remember the
+/*H:010
+ * We need to set up the Switcher at a high virtual address. Remember the
* Switcher is a few hundred bytes of assembler code which actually changes the
* CPU to run the Guest, and then changes back to the Host when a trap or
* interrupt happens.
* Host since it will be running as the switchover occurs.
*
* Trying to map memory at a particular address is an unusual thing to do, so
- * it's not a simple one-liner. */
+ * it's not a simple one-liner.
+ */
static __init int map_switcher(void)
{
int i, err;
* easy.
*/
- /* We allocate an array of struct page pointers. map_vm_area() wants
- * this, rather than just an array of pages. */
+ /*
+ * We allocate an array of struct page pointers. map_vm_area() wants
+ * this, rather than just an array of pages.
+ */
switcher_page = kmalloc(sizeof(switcher_page[0])*TOTAL_SWITCHER_PAGES,
GFP_KERNEL);
if (!switcher_page) {
goto out;
}
- /* Now we actually allocate the pages. The Guest will see these pages,
- * so we make sure they're zeroed. */
+ /*
+ * Now we actually allocate the pages. The Guest will see these pages,
+ * so we make sure they're zeroed.
+ */
for (i = 0; i < TOTAL_SWITCHER_PAGES; i++) {
unsigned long addr = get_zeroed_page(GFP_KERNEL);
if (!addr) {
switcher_page[i] = virt_to_page(addr);
}
- /* First we check that the Switcher won't overlap the fixmap area at
+ /*
+ * First we check that the Switcher won't overlap the fixmap area at
* the top of memory. It's currently nowhere near, but it could have
- * very strange effects if it ever happened. */
+ * very strange effects if it ever happened.
+ */
if (SWITCHER_ADDR + (TOTAL_SWITCHER_PAGES+1)*PAGE_SIZE > FIXADDR_START){
err = -ENOMEM;
printk("lguest: mapping switcher would thwack fixmap\n");
goto free_pages;
}
- /* Now we reserve the "virtual memory area" we want: 0xFFC00000
+ /*
+ * Now we reserve the "virtual memory area" we want: 0xFFC00000
* (SWITCHER_ADDR). We might not get it in theory, but in practice
* it's worked so far. The end address needs +1 because __get_vm_area
- * allocates an extra guard page, so we need space for that. */
+ * allocates an extra guard page, so we need space for that.
+ */
switcher_vma = __get_vm_area(TOTAL_SWITCHER_PAGES * PAGE_SIZE,
VM_ALLOC, SWITCHER_ADDR, SWITCHER_ADDR
+ (TOTAL_SWITCHER_PAGES+1) * PAGE_SIZE);
goto free_pages;
}
- /* This code actually sets up the pages we've allocated to appear at
+ /*
+ * This code actually sets up the pages we've allocated to appear at
* SWITCHER_ADDR. map_vm_area() takes the vma we allocated above, the
* kind of pages we're mapping (kernel pages), and a pointer to our
* array of struct pages. It increments that pointer, but we don't
- * care. */
+ * care.
+ */
pagep = switcher_page;
err = map_vm_area(switcher_vma, PAGE_KERNEL_EXEC, &pagep);
if (err) {
goto free_vma;
}
- /* Now the Switcher is mapped at the right address, we can't fail!
- * Copy in the compiled-in Switcher code (from <arch>_switcher.S). */
+ /*
+ * Now the Switcher is mapped at the right address, we can't fail!
+ * Copy in the compiled-in Switcher code (from <arch>_switcher.S).
+ */
memcpy(switcher_vma->addr, start_switcher_text,
end_switcher_text - start_switcher_text);
}
/*:*/
-/* Cleaning up the mapping when the module is unloaded is almost...
- * too easy. */
+/* Cleaning up the mapping when the module is unloaded is almost... too easy. */
static void unmap_switcher(void)
{
unsigned int i;
* But we can't trust the Guest: it might be trying to access the Launcher
* code. We have to check that the range is below the pfn_limit the Launcher
* gave us. We have to make sure that addr + len doesn't give us a false
- * positive by overflowing, too. */
+ * positive by overflowing, too.
+ */
bool lguest_address_ok(const struct lguest *lg,
unsigned long addr, unsigned long len)
{
return (addr+len) / PAGE_SIZE < lg->pfn_limit && (addr+len >= addr);
}
-/* This routine copies memory from the Guest. Here we can see how useful the
+/*
+ * This routine copies memory from the Guest. Here we can see how useful the
* kill_lguest() routine we met in the Launcher can be: we return a random
- * value (all zeroes) instead of needing to return an error. */
+ * value (all zeroes) instead of needing to return an error.
+ */
void __lgread(struct lg_cpu *cpu, void *b, unsigned long addr, unsigned bytes)
{
if (!lguest_address_ok(cpu->lg, addr, bytes)
}
/*:*/
-/*H:030 Let's jump straight to the the main loop which runs the Guest.
+/*H:030
+ * Let's jump straight to the the main loop which runs the Guest.
* Remember, this is called by the Launcher reading /dev/lguest, and we keep
- * going around and around until something interesting happens. */
+ * going around and around until something interesting happens.
+ */
int run_guest(struct lg_cpu *cpu, unsigned long __user *user)
{
/* We stop running once the Guest is dead. */
if (cpu->hcall)
do_hypercalls(cpu);
- /* It's possible the Guest did a NOTIFY hypercall to the
- * Launcher, in which case we return from the read() now. */
+ /*
+ * It's possible the Guest did a NOTIFY hypercall to the
+ * Launcher.
+ */
if (cpu->pending_notify) {
+ /*
+ * Does it just needs to write to a registered
+ * eventfd (ie. the appropriate virtqueue thread)?
+ */
if (!send_notify_to_eventfd(cpu)) {
+ /* OK, we tell the main Laucher. */
if (put_user(cpu->pending_notify, user))
return -EFAULT;
return sizeof(cpu->pending_notify);
if (signal_pending(current))
return -ERESTARTSYS;
- /* Check if there are any interrupts which can be delivered now:
+ /*
+ * Check if there are any interrupts which can be delivered now:
* if so, this sets up the hander to be executed when we next
- * run the Guest. */
+ * run the Guest.
+ */
irq = interrupt_pending(cpu, &more);
if (irq < LGUEST_IRQS)
try_deliver_interrupt(cpu, irq, more);
- /* All long-lived kernel loops need to check with this horrible
+ /*
+ * All long-lived kernel loops need to check with this horrible
* thing called the freezer. If the Host is trying to suspend,
- * it stops us. */
+ * it stops us.
+ */
try_to_freeze();
- /* Just make absolutely sure the Guest is still alive. One of
- * those hypercalls could have been fatal, for example. */
+ /*
+ * Just make absolutely sure the Guest is still alive. One of
+ * those hypercalls could have been fatal, for example.
+ */
if (cpu->lg->dead)
break;
- /* If the Guest asked to be stopped, we sleep. The Guest's
- * clock timer will wake us. */
+ /*
+ * If the Guest asked to be stopped, we sleep. The Guest's
+ * clock timer will wake us.
+ */
if (cpu->halted) {
set_current_state(TASK_INTERRUPTIBLE);
- /* Just before we sleep, make sure no interrupt snuck in
- * which we should be doing. */
+ /*
+ * Just before we sleep, make sure no interrupt snuck in
+ * which we should be doing.
+ */
if (interrupt_pending(cpu, &more) < LGUEST_IRQS)
set_current_state(TASK_RUNNING);
else
continue;
}
- /* OK, now we're ready to jump into the Guest. First we put up
- * the "Do Not Disturb" sign: */
+ /*
+ * OK, now we're ready to jump into the Guest. First we put up
+ * the "Do Not Disturb" sign:
+ */
local_irq_disable();
/* Actually run the Guest until something happens. */
}
/*:*/
-/* The Host side of lguest can be a module. This is a nice way for people to
- * play with it. */
+/*
+ * The Host side of lguest can be a module. This is a nice way for people to
+ * play with it.
+ */
module_init(init);
module_exit(fini);
MODULE_LICENSE("GPL");
-/*P:500 Just as userspace programs request kernel operations through a system
+/*P:500
+ * Just as userspace programs request kernel operations through a system
* call, the Guest requests Host operations through a "hypercall". You might
* notice this nomenclature doesn't really follow any logic, but the name has
* been around for long enough that we're stuck with it. As you'd expect, this
- * code is basically a one big switch statement. :*/
+ * code is basically a one big switch statement.
+:*/
/* Copyright (C) 2006 Rusty Russell IBM Corporation
#include <asm/pgtable.h>
#include "lg.h"
-/*H:120 This is the core hypercall routine: where the Guest gets what it wants.
- * Or gets killed. Or, in the case of LHCALL_SHUTDOWN, both. */
+/*H:120
+ * This is the core hypercall routine: where the Guest gets what it wants.
+ * Or gets killed. Or, in the case of LHCALL_SHUTDOWN, both.
+ */
static void do_hcall(struct lg_cpu *cpu, struct hcall_args *args)
{
switch (args->arg0) {
case LHCALL_FLUSH_ASYNC:
- /* This call does nothing, except by breaking out of the Guest
- * it makes us process all the asynchronous hypercalls. */
+ /*
+ * This call does nothing, except by breaking out of the Guest
+ * it makes us process all the asynchronous hypercalls.
+ */
break;
case LHCALL_SEND_INTERRUPTS:
- /* This call does nothing too, but by breaking out of the Guest
- * it makes us process any pending interrupts. */
+ /*
+ * This call does nothing too, but by breaking out of the Guest
+ * it makes us process any pending interrupts.
+ */
break;
case LHCALL_LGUEST_INIT:
- /* You can't get here unless you're already initialized. Don't
- * do that. */
+ /*
+ * You can't get here unless you're already initialized. Don't
+ * do that.
+ */
kill_guest(cpu, "already have lguest_data");
break;
case LHCALL_SHUTDOWN: {
- /* Shutdown is such a trivial hypercall that we do it in four
- * lines right here. */
char msg[128];
- /* If the lgread fails, it will call kill_guest() itself; the
- * kill_guest() with the message will be ignored. */
+ /*
+ * Shutdown is such a trivial hypercall that we do it in five
+ * lines right here.
+ *
+ * If the lgread fails, it will call kill_guest() itself; the
+ * kill_guest() with the message will be ignored.
+ */
__lgread(cpu, msg, args->arg1, sizeof(msg));
msg[sizeof(msg)-1] = '\0';
kill_guest(cpu, "CRASH: %s", msg);
break;
}
case LHCALL_FLUSH_TLB:
- /* FLUSH_TLB comes in two flavors, depending on the
- * argument: */
+ /* FLUSH_TLB comes in two flavors, depending on the argument: */
if (args->arg1)
guest_pagetable_clear_all(cpu);
else
guest_pagetable_flush_user(cpu);
break;
- /* All these calls simply pass the arguments through to the right
- * routines. */
+ /*
+ * All these calls simply pass the arguments through to the right
+ * routines.
+ */
case LHCALL_NEW_PGTABLE:
guest_new_pagetable(cpu, args->arg1);
break;
kill_guest(cpu, "Bad hypercall %li\n", args->arg0);
}
}
-/*:*/
-/*H:124 Asynchronous hypercalls are easy: we just look in the array in the
+/*H:124
+ * Asynchronous hypercalls are easy: we just look in the array in the
* Guest's "struct lguest_data" to see if any new ones are marked "ready".
*
* We are careful to do these in order: obviously we respect the order the
* Guest put them in the ring, but we also promise the Guest that they will
* happen before any normal hypercall (which is why we check this before
- * checking for a normal hcall). */
+ * checking for a normal hcall).
+ */
static void do_async_hcalls(struct lg_cpu *cpu)
{
unsigned int i;
/* We process "struct lguest_data"s hcalls[] ring once. */
for (i = 0; i < ARRAY_SIZE(st); i++) {
struct hcall_args args;
- /* We remember where we were up to from last time. This makes
+ /*
+ * We remember where we were up to from last time. This makes
* sure that the hypercalls are done in the order the Guest
- * places them in the ring. */
+ * places them in the ring.
+ */
unsigned int n = cpu->next_hcall;
/* 0xFF means there's no call here (yet). */
if (st[n] == 0xFF)
break;
- /* OK, we have hypercall. Increment the "next_hcall" cursor,
- * and wrap back to 0 if we reach the end. */
+ /*
+ * OK, we have hypercall. Increment the "next_hcall" cursor,
+ * and wrap back to 0 if we reach the end.
+ */
if (++cpu->next_hcall == LHCALL_RING_SIZE)
cpu->next_hcall = 0;
- /* Copy the hypercall arguments into a local copy of
- * the hcall_args struct. */
+ /*
+ * Copy the hypercall arguments into a local copy of the
+ * hcall_args struct.
+ */
if (copy_from_user(&args, &cpu->lg->lguest_data->hcalls[n],
sizeof(struct hcall_args))) {
kill_guest(cpu, "Fetching async hypercalls");
break;
}
- /* Stop doing hypercalls if they want to notify the Launcher:
- * it needs to service this first. */
+ /*
+ * Stop doing hypercalls if they want to notify the Launcher:
+ * it needs to service this first.
+ */
if (cpu->pending_notify)
break;
}
}
-/* Last of all, we look at what happens first of all. The very first time the
- * Guest makes a hypercall, we end up here to set things up: */
+/*
+ * Last of all, we look at what happens first of all. The very first time the
+ * Guest makes a hypercall, we end up here to set things up:
+ */
static void initialize(struct lg_cpu *cpu)
{
- /* You can't do anything until you're initialized. The Guest knows the
- * rules, so we're unforgiving here. */
+ /*
+ * You can't do anything until you're initialized. The Guest knows the
+ * rules, so we're unforgiving here.
+ */
if (cpu->hcall->arg0 != LHCALL_LGUEST_INIT) {
kill_guest(cpu, "hypercall %li before INIT", cpu->hcall->arg0);
return;
if (lguest_arch_init_hypercalls(cpu))
kill_guest(cpu, "bad guest page %p", cpu->lg->lguest_data);
- /* The Guest tells us where we're not to deliver interrupts by putting
- * the range of addresses into "struct lguest_data". */
+ /*
+ * The Guest tells us where we're not to deliver interrupts by putting
+ * the range of addresses into "struct lguest_data".
+ */
if (get_user(cpu->lg->noirq_start, &cpu->lg->lguest_data->noirq_start)
|| get_user(cpu->lg->noirq_end, &cpu->lg->lguest_data->noirq_end))
kill_guest(cpu, "bad guest page %p", cpu->lg->lguest_data);
- /* We write the current time into the Guest's data page once so it can
- * set its clock. */
+ /*
+ * We write the current time into the Guest's data page once so it can
+ * set its clock.
+ */
write_timestamp(cpu);
/* page_tables.c will also do some setup. */
page_table_guest_data_init(cpu);
- /* This is the one case where the above accesses might have been the
+ /*
+ * This is the one case where the above accesses might have been the
* first write to a Guest page. This may have caused a copy-on-write
* fault, but the old page might be (read-only) in the Guest
- * pagetable. */
+ * pagetable.
+ */
guest_pagetable_clear_all(cpu);
}
/*:*/
-/*M:013 If a Guest reads from a page (so creates a mapping) that it has never
+/*M:013
+ * If a Guest reads from a page (so creates a mapping) that it has never
* written to, and then the Launcher writes to it (ie. the output of a virtual
* device), the Guest will still see the old page. In practice, this never
* happens: why would the Guest read a page which it has never written to? But
- * a similar scenario might one day bite us, so it's worth mentioning. :*/
+ * a similar scenario might one day bite us, so it's worth mentioning.
+ *
+ * Note that if we used a shared anonymous mapping in the Launcher instead of
+ * mapping /dev/zero private, we wouldn't worry about cop-on-write. And we
+ * need that to switch the Launcher to processes (away from threads) anyway.
+:*/
/*H:100
* Hypercalls
return;
}
- /* The Guest has initialized.
+ /*
+ * The Guest has initialized.
*
- * Look in the hypercall ring for the async hypercalls: */
+ * Look in the hypercall ring for the async hypercalls:
+ */
do_async_hcalls(cpu);
- /* If we stopped reading the hypercall ring because the Guest did a
+ /*
+ * If we stopped reading the hypercall ring because the Guest did a
* NOTIFY to the Launcher, we want to return now. Otherwise we do
- * the hypercall. */
+ * the hypercall.
+ */
if (!cpu->pending_notify) {
do_hcall(cpu, cpu->hcall);
- /* Tricky point: we reset the hcall pointer to mark the
+ /*
+ * Tricky point: we reset the hcall pointer to mark the
* hypercall as "done". We use the hcall pointer rather than
* the trap number to indicate a hypercall is pending.
* Normally it doesn't matter: the Guest will run again and
* However, if we are signalled or the Guest sends I/O to the
* Launcher, the run_guest() loop will exit without running the
* Guest. When it comes back it would try to re-run the
- * hypercall. Finding that bug sucked. */
+ * hypercall. Finding that bug sucked.
+ */
cpu->hcall = NULL;
}
}
-/* This routine supplies the Guest with time: it's used for wallclock time at
- * initial boot and as a rough time source if the TSC isn't available. */
+/*
+ * This routine supplies the Guest with time: it's used for wallclock time at
+ * initial boot and as a rough time source if the TSC isn't available.
+ */
void write_timestamp(struct lg_cpu *cpu)
{
struct timespec now;
-/*P:800 Interrupts (traps) are complicated enough to earn their own file.
+/*P:800
+ * Interrupts (traps) are complicated enough to earn their own file.
* There are three classes of interrupts:
*
* 1) Real hardware interrupts which occur while we're running the Guest,
* just like real hardware would deliver them. Traps from the Guest can be set
* up to go directly back into the Guest, but sometimes the Host wants to see
* them first, so we also have a way of "reflecting" them into the Guest as if
- * they had been delivered to it directly. :*/
+ * they had been delivered to it directly.
+:*/
#include <linux/uaccess.h>
#include <linux/interrupt.h>
#include <linux/module.h>
return (lo & 0x0000FFFF) | (hi & 0xFFFF0000);
}
-/* The "type" of the interrupt handler is a 4 bit field: we only support a
- * couple of types. */
+/*
+ * The "type" of the interrupt handler is a 4 bit field: we only support a
+ * couple of types.
+ */
static int idt_type(u32 lo, u32 hi)
{
return (hi >> 8) & 0xF;
return (hi & 0x8000);
}
-/* We need a helper to "push" a value onto the Guest's stack, since that's a
- * big part of what delivering an interrupt does. */
+/*
+ * We need a helper to "push" a value onto the Guest's stack, since that's a
+ * big part of what delivering an interrupt does.
+ */
static void push_guest_stack(struct lg_cpu *cpu, unsigned long *gstack, u32 val)
{
/* Stack grows upwards: move stack then write value. */
lgwrite(cpu, *gstack, u32, val);
}
-/*H:210 The set_guest_interrupt() routine actually delivers the interrupt or
+/*H:210
+ * The set_guest_interrupt() routine actually delivers the interrupt or
* trap. The mechanics of delivering traps and interrupts to the Guest are the
* same, except some traps have an "error code" which gets pushed onto the
* stack as well: the caller tells us if this is one.
*
* We set up the stack just like the CPU does for a real interrupt, so it's
* identical for the Guest (and the standard "iret" instruction will undo
- * it). */
+ * it).
+ */
static void set_guest_interrupt(struct lg_cpu *cpu, u32 lo, u32 hi,
bool has_err)
{
u32 eflags, ss, irq_enable;
unsigned long virtstack;
- /* There are two cases for interrupts: one where the Guest is already
+ /*
+ * There are two cases for interrupts: one where the Guest is already
* in the kernel, and a more complex one where the Guest is in
- * userspace. We check the privilege level to find out. */
+ * userspace. We check the privilege level to find out.
+ */
if ((cpu->regs->ss&0x3) != GUEST_PL) {
- /* The Guest told us their kernel stack with the SET_STACK
- * hypercall: both the virtual address and the segment */
+ /*
+ * The Guest told us their kernel stack with the SET_STACK
+ * hypercall: both the virtual address and the segment.
+ */
virtstack = cpu->esp1;
ss = cpu->ss1;
origstack = gstack = guest_pa(cpu, virtstack);
- /* We push the old stack segment and pointer onto the new
+ /*
+ * We push the old stack segment and pointer onto the new
* stack: when the Guest does an "iret" back from the interrupt
* handler the CPU will notice they're dropping privilege
- * levels and expect these here. */
+ * levels and expect these here.
+ */
push_guest_stack(cpu, &gstack, cpu->regs->ss);
push_guest_stack(cpu, &gstack, cpu->regs->esp);
} else {
origstack = gstack = guest_pa(cpu, virtstack);
}
- /* Remember that we never let the Guest actually disable interrupts, so
+ /*
+ * Remember that we never let the Guest actually disable interrupts, so
* the "Interrupt Flag" bit is always set. We copy that bit from the
* Guest's "irq_enabled" field into the eflags word: we saw the Guest
- * copy it back in "lguest_iret". */
+ * copy it back in "lguest_iret".
+ */
eflags = cpu->regs->eflags;
if (get_user(irq_enable, &cpu->lg->lguest_data->irq_enabled) == 0
&& !(irq_enable & X86_EFLAGS_IF))
eflags &= ~X86_EFLAGS_IF;
- /* An interrupt is expected to push three things on the stack: the old
+ /*
+ * An interrupt is expected to push three things on the stack: the old
* "eflags" word, the old code segment, and the old instruction
- * pointer. */
+ * pointer.
+ */
push_guest_stack(cpu, &gstack, eflags);
push_guest_stack(cpu, &gstack, cpu->regs->cs);
push_guest_stack(cpu, &gstack, cpu->regs->eip);
if (has_err)
push_guest_stack(cpu, &gstack, cpu->regs->errcode);
- /* Now we've pushed all the old state, we change the stack, the code
- * segment and the address to execute. */
+ /*
+ * Now we've pushed all the old state, we change the stack, the code
+ * segment and the address to execute.
+ */
cpu->regs->ss = ss;
cpu->regs->esp = virtstack + (gstack - origstack);
cpu->regs->cs = (__KERNEL_CS|GUEST_PL);
cpu->regs->eip = idt_address(lo, hi);
- /* There are two kinds of interrupt handlers: 0xE is an "interrupt
- * gate" which expects interrupts to be disabled on entry. */
+ /*
+ * There are two kinds of interrupt handlers: 0xE is an "interrupt
+ * gate" which expects interrupts to be disabled on entry.
+ */
if (idt_type(lo, hi) == 0xE)
if (put_user(0, &cpu->lg->lguest_data->irq_enabled))
kill_guest(cpu, "Disabling interrupts");
*
* interrupt_pending() returns the first pending interrupt which isn't blocked
* by the Guest. It is called before every entry to the Guest, and just before
- * we go to sleep when the Guest has halted itself. */
+ * we go to sleep when the Guest has halted itself.
+ */
unsigned int interrupt_pending(struct lg_cpu *cpu, bool *more)
{
unsigned int irq;
if (!cpu->lg->lguest_data)
return LGUEST_IRQS;
- /* Take our "irqs_pending" array and remove any interrupts the Guest
- * wants blocked: the result ends up in "blk". */
+ /*
+ * Take our "irqs_pending" array and remove any interrupts the Guest
+ * wants blocked: the result ends up in "blk".
+ */
if (copy_from_user(&blk, cpu->lg->lguest_data->blocked_interrupts,
sizeof(blk)))
return LGUEST_IRQS;
return irq;
}
-/* This actually diverts the Guest to running an interrupt handler, once an
- * interrupt has been identified by interrupt_pending(). */
+/*
+ * This actually diverts the Guest to running an interrupt handler, once an
+ * interrupt has been identified by interrupt_pending().
+ */
void try_deliver_interrupt(struct lg_cpu *cpu, unsigned int irq, bool more)
{
struct desc_struct *idt;
BUG_ON(irq >= LGUEST_IRQS);
- /* They may be in the middle of an iret, where they asked us never to
- * deliver interrupts. */
+ /*
+ * They may be in the middle of an iret, where they asked us never to
+ * deliver interrupts.
+ */
if (cpu->regs->eip >= cpu->lg->noirq_start &&
(cpu->regs->eip < cpu->lg->noirq_end))
return;
}
}
- /* Look at the IDT entry the Guest gave us for this interrupt. The
+ /*
+ * Look at the IDT entry the Guest gave us for this interrupt. The
* first 32 (FIRST_EXTERNAL_VECTOR) entries are for traps, so we skip
- * over them. */
+ * over them.
+ */
idt = &cpu->arch.idt[FIRST_EXTERNAL_VECTOR+irq];
/* If they don't have a handler (yet?), we just ignore it */
if (idt_present(idt->a, idt->b)) {
/* OK, mark it no longer pending and deliver it. */
clear_bit(irq, cpu->irqs_pending);
- /* set_guest_interrupt() takes the interrupt descriptor and a
+ /*
+ * set_guest_interrupt() takes the interrupt descriptor and a
* flag to say whether this interrupt pushes an error code onto
- * the stack as well: virtual interrupts never do. */
+ * the stack as well: virtual interrupts never do.
+ */
set_guest_interrupt(cpu, idt->a, idt->b, false);
}
- /* Every time we deliver an interrupt, we update the timestamp in the
+ /*
+ * Every time we deliver an interrupt, we update the timestamp in the
* Guest's lguest_data struct. It would be better for the Guest if we
* did this more often, but it can actually be quite slow: doing it
* here is a compromise which means at least it gets updated every
- * timer interrupt. */
+ * timer interrupt.
+ */
write_timestamp(cpu);
- /* If there are no other interrupts we want to deliver, clear
- * the pending flag. */
+ /*
+ * If there are no other interrupts we want to deliver, clear
+ * the pending flag.
+ */
if (!more)
put_user(0, &cpu->lg->lguest_data->irq_pending);
}
/* And this is the routine when we want to set an interrupt for the Guest. */
void set_interrupt(struct lg_cpu *cpu, unsigned int irq)
{
- /* Next time the Guest runs, the core code will see if it can deliver
- * this interrupt. */
+ /*
+ * Next time the Guest runs, the core code will see if it can deliver
+ * this interrupt.
+ */
set_bit(irq, cpu->irqs_pending);
- /* Make sure it sees it; it might be asleep (eg. halted), or
- * running the Guest right now, in which case kick_process()
- * will knock it out. */
+ /*
+ * Make sure it sees it; it might be asleep (eg. halted), or running
+ * the Guest right now, in which case kick_process() will knock it out.
+ */
if (!wake_up_process(cpu->tsk))
kick_process(cpu->tsk);
}
/*:*/
-/* Linux uses trap 128 for system calls. Plan9 uses 64, and Ron Minnich sent
+/*
+ * Linux uses trap 128 for system calls. Plan9 uses 64, and Ron Minnich sent
* me a patch, so we support that too. It'd be a big step for lguest if half
* the Plan 9 user base were to start using it.
*
* Actually now I think of it, it's possible that Ron *is* half the Plan 9
- * userbase. Oh well. */
+ * userbase. Oh well.
+ */
static bool could_be_syscall(unsigned int num)
{
/* Normal Linux SYSCALL_VECTOR or reserved vector? */
clear_bit(syscall_vector, used_vectors);
}
-/*H:220 Now we've got the routines to deliver interrupts, delivering traps like
+/*H:220
+ * Now we've got the routines to deliver interrupts, delivering traps like
* page fault is easy. The only trick is that Intel decided that some traps
- * should have error codes: */
+ * should have error codes:
+ */
static bool has_err(unsigned int trap)
{
return (trap == 8 || (trap >= 10 && trap <= 14) || trap == 17);
/* deliver_trap() returns true if it could deliver the trap. */
bool deliver_trap(struct lg_cpu *cpu, unsigned int num)
{
- /* Trap numbers are always 8 bit, but we set an impossible trap number
- * for traps inside the Switcher, so check that here. */
+ /*
+ * Trap numbers are always 8 bit, but we set an impossible trap number
+ * for traps inside the Switcher, so check that here.
+ */
if (num >= ARRAY_SIZE(cpu->arch.idt))
return false;
- /* Early on the Guest hasn't set the IDT entries (or maybe it put a
- * bogus one in): if we fail here, the Guest will be killed. */
+ /*
+ * Early on the Guest hasn't set the IDT entries (or maybe it put a
+ * bogus one in): if we fail here, the Guest will be killed.
+ */
if (!idt_present(cpu->arch.idt[num].a, cpu->arch.idt[num].b))
return false;
set_guest_interrupt(cpu, cpu->arch.idt[num].a,
return true;
}
-/*H:250 Here's the hard part: returning to the Host every time a trap happens
+/*H:250
+ * Here's the hard part: returning to the Host every time a trap happens
* and then calling deliver_trap() and re-entering the Guest is slow.
* Particularly because Guest userspace system calls are traps (usually trap
* 128).
* the other hypervisors would beat it up at lunchtime.
*
* This routine indicates if a particular trap number could be delivered
- * directly. */
+ * directly.
+ */
static bool direct_trap(unsigned int num)
{
- /* Hardware interrupts don't go to the Guest at all (except system
- * call). */
+ /*
+ * Hardware interrupts don't go to the Guest at all (except system
+ * call).
+ */
if (num >= FIRST_EXTERNAL_VECTOR && !could_be_syscall(num))
return false;
- /* The Host needs to see page faults (for shadow paging and to save the
+ /*
+ * The Host needs to see page faults (for shadow paging and to save the
* fault address), general protection faults (in/out emulation) and
* device not available (TS handling), invalid opcode fault (kvm hcall),
- * and of course, the hypercall trap. */
+ * and of course, the hypercall trap.
+ */
return num != 14 && num != 13 && num != 7 &&
num != 6 && num != LGUEST_TRAP_ENTRY;
}
/*:*/
-/*M:005 The Guest has the ability to turn its interrupt gates into trap gates,
+/*M:005
+ * The Guest has the ability to turn its interrupt gates into trap gates,
* if it is careful. The Host will let trap gates can go directly to the
* Guest, but the Guest needs the interrupts atomically disabled for an
* interrupt gate. It can do this by pointing the trap gate at instructions
- * within noirq_start and noirq_end, where it can safely disable interrupts. */
+ * within noirq_start and noirq_end, where it can safely disable interrupts.
+ */
-/*M:006 The Guests do not use the sysenter (fast system call) instruction,
+/*M:006
+ * The Guests do not use the sysenter (fast system call) instruction,
* because it's hardcoded to enter privilege level 0 and so can't go direct.
* It's about twice as fast as the older "int 0x80" system call, so it might
* still be worthwhile to handle it in the Switcher and lcall down to the
* Guest. The sysenter semantics are hairy tho: search for that keyword in
- * entry.S :*/
+ * entry.S
+:*/
-/*H:260 When we make traps go directly into the Guest, we need to make sure
+/*H:260
+ * When we make traps go directly into the Guest, we need to make sure
* the kernel stack is valid (ie. mapped in the page tables). Otherwise, the
* CPU trying to deliver the trap will fault while trying to push the interrupt
* words on the stack: this is called a double fault, and it forces us to kill
* the Guest.
*
- * Which is deeply unfair, because (literally!) it wasn't the Guests' fault. */
+ * Which is deeply unfair, because (literally!) it wasn't the Guests' fault.
+ */
void pin_stack_pages(struct lg_cpu *cpu)
{
unsigned int i;
- /* Depending on the CONFIG_4KSTACKS option, the Guest can have one or
- * two pages of stack space. */
+ /*
+ * Depending on the CONFIG_4KSTACKS option, the Guest can have one or
+ * two pages of stack space.
+ */
for (i = 0; i < cpu->lg->stack_pages; i++)
- /* The stack grows *upwards*, so the address we're given is the
+ /*
+ * The stack grows *upwards*, so the address we're given is the
* start of the page after the kernel stack. Subtract one to
* get back onto the first stack page, and keep subtracting to
- * get to the rest of the stack pages. */
+ * get to the rest of the stack pages.
+ */
pin_page(cpu, cpu->esp1 - 1 - i * PAGE_SIZE);
}
-/* Direct traps also mean that we need to know whenever the Guest wants to use
+/*
+ * Direct traps also mean that we need to know whenever the Guest wants to use
* a different kernel stack, so we can change the IDT entries to use that
* stack. The IDT entries expect a virtual address, so unlike most addresses
* the Guest gives us, the "esp" (stack pointer) value here is virtual, not
* physical.
*
* In Linux each process has its own kernel stack, so this happens a lot: we
- * change stacks on each context switch. */
+ * change stacks on each context switch.
+ */
void guest_set_stack(struct lg_cpu *cpu, u32 seg, u32 esp, unsigned int pages)
{
- /* You are not allowed have a stack segment with privilege level 0: bad
- * Guest! */
+ /*
+ * You're not allowed a stack segment with privilege level 0: bad Guest!
+ */
if ((seg & 0x3) != GUEST_PL)
kill_guest(cpu, "bad stack segment %i", seg);
/* We only expect one or two stack pages. */
pin_stack_pages(cpu);
}
-/* All this reference to mapping stacks leads us neatly into the other complex
- * part of the Host: page table handling. */
+/*
+ * All this reference to mapping stacks leads us neatly into the other complex
+ * part of the Host: page table handling.
+ */
-/*H:235 This is the routine which actually checks the Guest's IDT entry and
- * transfers it into the entry in "struct lguest": */
+/*H:235
+ * This is the routine which actually checks the Guest's IDT entry and
+ * transfers it into the entry in "struct lguest":
+ */
static void set_trap(struct lg_cpu *cpu, struct desc_struct *trap,
unsigned int num, u32 lo, u32 hi)
{
if (type != 0xE && type != 0xF)
kill_guest(cpu, "bad IDT type %i", type);
- /* We only copy the handler address, present bit, privilege level and
+ /*
+ * We only copy the handler address, present bit, privilege level and
* type. The privilege level controls where the trap can be triggered
* manually with an "int" instruction. This is usually GUEST_PL,
- * except for system calls which userspace can use. */
+ * except for system calls which userspace can use.
+ */
trap->a = ((__KERNEL_CS|GUEST_PL)<<16) | (lo&0x0000FFFF);
trap->b = (hi&0xFFFFEF00);
}
-/*H:230 While we're here, dealing with delivering traps and interrupts to the
+/*H:230
+ * While we're here, dealing with delivering traps and interrupts to the
* Guest, we might as well complete the picture: how the Guest tells us where
* it wants them to go. This would be simple, except making traps fast
* requires some tricks.
*
* We saw the Guest setting Interrupt Descriptor Table (IDT) entries with the
- * LHCALL_LOAD_IDT_ENTRY hypercall before: that comes here. */
+ * LHCALL_LOAD_IDT_ENTRY hypercall before: that comes here.
+ */
void load_guest_idt_entry(struct lg_cpu *cpu, unsigned int num, u32 lo, u32 hi)
{
- /* Guest never handles: NMI, doublefault, spurious interrupt or
- * hypercall. We ignore when it tries to set them. */
+ /*
+ * Guest never handles: NMI, doublefault, spurious interrupt or
+ * hypercall. We ignore when it tries to set them.
+ */
if (num == 2 || num == 8 || num == 15 || num == LGUEST_TRAP_ENTRY)
return;
- /* Mark the IDT as changed: next time the Guest runs we'll know we have
- * to copy this again. */
+ /*
+ * Mark the IDT as changed: next time the Guest runs we'll know we have
+ * to copy this again.
+ */
cpu->changed |= CHANGED_IDT;
/* Check that the Guest doesn't try to step outside the bounds. */
set_trap(cpu, &cpu->arch.idt[num], num, lo, hi);
}
-/* The default entry for each interrupt points into the Switcher routines which
+/*
+ * The default entry for each interrupt points into the Switcher routines which
* simply return to the Host. The run_guest() loop will then call
- * deliver_trap() to bounce it back into the Guest. */
+ * deliver_trap() to bounce it back into the Guest.
+ */
static void default_idt_entry(struct desc_struct *idt,
int trap,
const unsigned long handler,
/* A present interrupt gate. */
u32 flags = 0x8e00;
- /* Set the privilege level on the entry for the hypercall: this allows
- * the Guest to use the "int" instruction to trigger it. */
+ /*
+ * Set the privilege level on the entry for the hypercall: this allows
+ * the Guest to use the "int" instruction to trigger it.
+ */
if (trap == LGUEST_TRAP_ENTRY)
flags |= (GUEST_PL << 13);
else if (base)
- /* Copy priv. level from what Guest asked for. This allows
- * debug (int 3) traps from Guest userspace, for example. */
+ /*
+ * Copy privilege level from what Guest asked for. This allows
+ * debug (int 3) traps from Guest userspace, for example.
+ */
flags |= (base->b & 0x6000);
/* Now pack it into the IDT entry in its weird format. */
default_idt_entry(&state->guest_idt[i], i, def[i], NULL);
}
-/*H:240 We don't use the IDT entries in the "struct lguest" directly, instead
+/*H:240
+ * We don't use the IDT entries in the "struct lguest" directly, instead
* we copy them into the IDT which we've set up for Guests on this CPU, just
- * before we run the Guest. This routine does that copy. */
+ * before we run the Guest. This routine does that copy.
+ */
void copy_traps(const struct lg_cpu *cpu, struct desc_struct *idt,
const unsigned long *def)
{
unsigned int i;
- /* We can simply copy the direct traps, otherwise we use the default
- * ones in the Switcher: they will return to the Host. */
+ /*
+ * We can simply copy the direct traps, otherwise we use the default
+ * ones in the Switcher: they will return to the Host.
+ */
for (i = 0; i < ARRAY_SIZE(cpu->arch.idt); i++) {
const struct desc_struct *gidt = &cpu->arch.idt[i];
if (!direct_trap(i))
continue;
- /* Only trap gates (type 15) can go direct to the Guest.
+ /*
+ * Only trap gates (type 15) can go direct to the Guest.
* Interrupt gates (type 14) disable interrupts as they are
* entered, which we never let the Guest do. Not present
* entries (type 0x0) also can't go direct, of course.
*
* If it can't go direct, we still need to copy the priv. level:
* they might want to give userspace access to a software
- * interrupt. */
+ * interrupt.
+ */
if (idt_type(gidt->a, gidt->b) == 0xF)
idt[i] = *gidt;
else
* the next timer interrupt (in nanoseconds). We use the high-resolution timer
* infrastructure to set a callback at that time.
*
- * 0 means "turn off the clock". */
+ * 0 means "turn off the clock".
+ */
void guest_set_clockevent(struct lg_cpu *cpu, unsigned long delta)
{
ktime_t expires;
return;
}
- /* We use wallclock time here, so the Guest might not be running for
+ /*
+ * We use wallclock time here, so the Guest might not be running for
* all the time between now and the timer interrupt it asked for. This
- * is almost always the right thing to do. */
+ * is almost always the right thing to do.
+ */
expires = ktime_add_ns(ktime_get_real(), delta);
hrtimer_start(&cpu->hrt, expires, HRTIMER_MODE_ABS);
}
void free_pagetables(void);
int init_pagetables(struct page **switcher_page, unsigned int pages);
-struct pgdir
-{
+struct pgdir {
unsigned long gpgdir;
pgd_t *pgdir;
};
/* We have two pages shared with guests, per cpu. */
-struct lguest_pages
-{
+struct lguest_pages {
/* This is the stack page mapped rw in guest */
char spare[PAGE_SIZE - sizeof(struct lguest_regs)];
struct lguest_regs regs;
#define CHANGED_GDT_TLS 4 /* Actually a subset of CHANGED_GDT */
#define CHANGED_ALL 3
-struct lguest;
-
struct lg_cpu {
unsigned int id;
struct lguest *lg;
unsigned long pending_notify; /* pfn from LHCALL_NOTIFY */
- /* At end of a page shared mapped over lguest_pages in guest. */
+ /* At end of a page shared mapped over lguest_pages in guest. */
unsigned long regs_page;
struct lguest_regs *regs;
struct lguest_pages *last_pages;
- int cpu_pgd; /* which pgd this cpu is currently using */
+ int cpu_pgd; /* Which pgd this cpu is currently using */
/* If a hypercall was asked for, this points to the arguments. */
struct hcall_args *hcall;
};
/* The private info the thread maintains about the guest. */
-struct lguest
-{
+struct lguest {
struct lguest_data __user *lguest_data;
struct lg_cpu cpus[NR_CPUS];
unsigned int nr_cpus;
u32 pfn_limit;
- /* This provides the offset to the base of guest-physical
- * memory in the Launcher. */
+
+ /*
+ * This provides the offset to the base of guest-physical memory in the
+ * Launcher.
+ */
void __user *mem_base;
unsigned long kernel_address;
void __lgread(struct lg_cpu *, void *, unsigned long, unsigned);
void __lgwrite(struct lg_cpu *, unsigned long, const void *, unsigned);
-/*H:035 Using memory-copy operations like that is usually inconvient, so we
+/*H:035
+ * Using memory-copy operations like that is usually inconvient, so we
* have the following helper macros which read and write a specific type (often
* an unsigned long).
*
- * This reads into a variable of the given type then returns that. */
+ * This reads into a variable of the given type then returns that.
+ */
#define lgread(cpu, addr, type) \
({ type _v; __lgread((cpu), &_v, (addr), sizeof(_v)); _v; })
int run_guest(struct lg_cpu *cpu, unsigned long __user *user);
-/* Helper macros to obtain the first 12 or the last 20 bits, this is only the
+/*
+ * Helper macros to obtain the first 12 or the last 20 bits, this is only the
* first step in the migration to the kernel types. pte_pfn is already defined
- * in the kernel. */
+ * in the kernel.
+ */
#define pgd_flags(x) (pgd_val(x) & ~PAGE_MASK)
#define pgd_pfn(x) (pgd_val(x) >> PAGE_SHIFT)
#define pmd_flags(x) (pmd_val(x) & ~PAGE_MASK)
-/*P:050 Lguest guests use a very simple method to describe devices. It's a
+/*P:050
+ * Lguest guests use a very simple method to describe devices. It's a
* series of device descriptors contained just above the top of normal Guest
* memory.
*
* We use the standard "virtio" device infrastructure, which provides us with a
* console, a network and a block driver. Each one expects some configuration
- * information and a "virtqueue" or two to send and receive data. :*/
+ * information and a "virtqueue" or two to send and receive data.
+:*/
#include <linux/init.h>
#include <linux/bootmem.h>
#include <linux/lguest_launcher.h>
/* The pointer to our (page) of device descriptions. */
static void *lguest_devices;
-/* For Guests, device memory can be used as normal memory, so we cast away the
- * __iomem to quieten sparse. */
+/*
+ * For Guests, device memory can be used as normal memory, so we cast away the
+ * __iomem to quieten sparse.
+ */
static inline void *lguest_map(unsigned long phys_addr, unsigned long pages)
{
return (__force void *)ioremap_cache(phys_addr, PAGE_SIZE*pages);
iounmap((__force void __iomem *)addr);
}
-/*D:100 Each lguest device is just a virtio device plus a pointer to its entry
- * in the lguest_devices page. */
+/*D:100
+ * Each lguest device is just a virtio device plus a pointer to its entry
+ * in the lguest_devices page.
+ */
struct lguest_device {
struct virtio_device vdev;
struct lguest_device_desc *desc;
};
-/* Since the virtio infrastructure hands us a pointer to the virtio_device all
+/*
+ * Since the virtio infrastructure hands us a pointer to the virtio_device all
* the time, it helps to have a curt macro to get a pointer to the struct
- * lguest_device it's enclosed in. */
+ * lguest_device it's enclosed in.
+ */
#define to_lgdev(vd) container_of(vd, struct lguest_device, vdev)
/*D:130
* the driver will look at them during setup.
*
* A convenient routine to return the device's virtqueue config array:
- * immediately after the descriptor. */
+ * immediately after the descriptor.
+ */
static struct lguest_vqconfig *lg_vq(const struct lguest_device_desc *desc)
{
return (void *)(desc + 1);
return features;
}
-/* The virtio core takes the features the Host offers, and copies the
- * ones supported by the driver into the vdev->features array. Once
- * that's all sorted out, this routine is called so we can tell the
- * Host which features we understand and accept. */
+/*
+ * The virtio core takes the features the Host offers, and copies the ones
+ * supported by the driver into the vdev->features array. Once that's all
+ * sorted out, this routine is called so we can tell the Host which features we
+ * understand and accept.
+ */
static void lg_finalize_features(struct virtio_device *vdev)
{
unsigned int i, bits;
/* Give virtio_ring a chance to accept features. */
vring_transport_features(vdev);
- /* The vdev->feature array is a Linux bitmask: this isn't the
- * same as a the simple array of bits used by lguest devices
- * for features. So we do this slow, manual conversion which is
- * completely general. */
+ /*
+ * The vdev->feature array is a Linux bitmask: this isn't the same as a
+ * the simple array of bits used by lguest devices for features. So we
+ * do this slow, manual conversion which is completely general.
+ */
memset(out_features, 0, desc->feature_len);
bits = min_t(unsigned, desc->feature_len, sizeof(vdev->features)) * 8;
for (i = 0; i < bits; i++) {
memcpy(lg_config(desc) + offset, buf, len);
}
-/* The operations to get and set the status word just access the status field
- * of the device descriptor. */
+/*
+ * The operations to get and set the status word just access the status field
+ * of the device descriptor.
+ */
static u8 lg_get_status(struct virtio_device *vdev)
{
return to_lgdev(vdev)->desc->status;
}
-/* To notify on status updates, we (ab)use the NOTIFY hypercall, with the
- * descriptor address of the device. A zero status means "reset". */
+/*
+ * To notify on status updates, we (ab)use the NOTIFY hypercall, with the
+ * descriptor address of the device. A zero status means "reset".
+ */
static void set_status(struct virtio_device *vdev, u8 status)
{
unsigned long offset = (void *)to_lgdev(vdev)->desc - lguest_devices;
*/
/*D:140 This is the information we remember about each virtqueue. */
-struct lguest_vq_info
-{
+struct lguest_vq_info {
/* A copy of the information contained in the device config. */
struct lguest_vqconfig config;
void *pages;
};
-/* When the virtio_ring code wants to prod the Host, it calls us here and we
+/*
+ * When the virtio_ring code wants to prod the Host, it calls us here and we
* make a hypercall. We hand the physical address of the virtqueue so the Host
- * knows which virtqueue we're talking about. */
+ * knows which virtqueue we're talking about.
+ */
static void lg_notify(struct virtqueue *vq)
{
- /* We store our virtqueue information in the "priv" pointer of the
- * virtqueue structure. */
+ /*
+ * We store our virtqueue information in the "priv" pointer of the
+ * virtqueue structure.
+ */
struct lguest_vq_info *lvq = vq->priv;
kvm_hypercall1(LHCALL_NOTIFY, lvq->config.pfn << PAGE_SHIFT);
/* An extern declaration inside a C file is bad form. Don't do it. */
extern void lguest_setup_irq(unsigned int irq);
-/* This routine finds the first virtqueue described in the configuration of
+/*
+ * This routine finds the Nth virtqueue described in the configuration of
* this device and sets it up.
*
* This is kind of an ugly duckling. It'd be nicer to have a standard
* everyone wants to do it differently. The KVM coders want the Guest to
* allocate its own pages and tell the Host where they are, but for lguest it's
* simpler for the Host to simply tell us where the pages are.
- *
- * So we provide drivers with a "find the Nth virtqueue and set it up"
- * function. */
+ */
static struct virtqueue *lg_find_vq(struct virtio_device *vdev,
unsigned index,
void (*callback)(struct virtqueue *vq),
if (!lvq)
return ERR_PTR(-ENOMEM);
- /* Make a copy of the "struct lguest_vqconfig" entry, which sits after
+ /*
+ * Make a copy of the "struct lguest_vqconfig" entry, which sits after
* the descriptor. We need a copy because the config space might not
- * be aligned correctly. */
+ * be aligned correctly.
+ */
memcpy(&lvq->config, lg_vq(ldev->desc)+index, sizeof(lvq->config));
printk("Mapping virtqueue %i addr %lx\n", index,
goto free_lvq;
}
- /* OK, tell virtio_ring.c to set up a virtqueue now we know its size
- * and we've got a pointer to its pages. */
+ /*
+ * OK, tell virtio_ring.c to set up a virtqueue now we know its size
+ * and we've got a pointer to its pages.
+ */
vq = vring_new_virtqueue(lvq->config.num, LGUEST_VRING_ALIGN,
vdev, lvq->pages, lg_notify, callback, name);
if (!vq) {
/* Make sure the interrupt is allocated. */
lguest_setup_irq(lvq->config.irq);
- /* Tell the interrupt for this virtqueue to go to the virtio_ring
- * interrupt handler. */
- /* FIXME: We used to have a flag for the Host to tell us we could use
+ /*
+ * Tell the interrupt for this virtqueue to go to the virtio_ring
+ * interrupt handler.
+ *
+ * FIXME: We used to have a flag for the Host to tell us we could use
* the interrupt as a source of randomness: it'd be nice to have that
- * back.. */
+ * back.
+ */
err = request_irq(lvq->config.irq, vring_interrupt, IRQF_SHARED,
dev_name(&vdev->dev), vq);
if (err)
goto destroy_vring;
- /* Last of all we hook up our 'struct lguest_vq_info" to the
- * virtqueue's priv pointer. */
+ /*
+ * Last of all we hook up our 'struct lguest_vq_info" to the
+ * virtqueue's priv pointer.
+ */
vq->priv = lvq;
return vq;
.del_vqs = lg_del_vqs,
};
-/* The root device for the lguest virtio devices. This makes them appear as
- * /sys/devices/lguest/0,1,2 not /sys/devices/0,1,2. */
+/*
+ * The root device for the lguest virtio devices. This makes them appear as
+ * /sys/devices/lguest/0,1,2 not /sys/devices/0,1,2.
+ */
static struct device *lguest_root;
-/*D:120 This is the core of the lguest bus: actually adding a new device.
+/*D:120
+ * This is the core of the lguest bus: actually adding a new device.
* It's a separate function because it's neater that way, and because an
* earlier version of the code supported hotplug and unplug. They were removed
* early on because they were never used.
*
* It's worth reading this carefully: we start with a pointer to the new device
* descriptor in the "lguest_devices" page, and the offset into the device
- * descriptor page so we can uniquely identify it if things go badly wrong. */
+ * descriptor page so we can uniquely identify it if things go badly wrong.
+ */
static void add_lguest_device(struct lguest_device_desc *d,
unsigned int offset)
{
struct lguest_device *ldev;
- /* Start with zeroed memory; Linux's device layer seems to count on
- * it. */
+ /* Start with zeroed memory; Linux's device layer counts on it. */
ldev = kzalloc(sizeof(*ldev), GFP_KERNEL);
if (!ldev) {
printk(KERN_EMERG "Cannot allocate lguest dev %u type %u\n",
/* This devices' parent is the lguest/ dir. */
ldev->vdev.dev.parent = lguest_root;
- /* We have a unique device index thanks to the dev_index counter. */
+ /*
+ * The device type comes straight from the descriptor. There's also a
+ * device vendor field in the virtio_device struct, which we leave as
+ * 0.
+ */
ldev->vdev.id.device = d->type;
- /* We have a simple set of routines for querying the device's
- * configuration information and setting its status. */
+ /*
+ * We have a simple set of routines for querying the device's
+ * configuration information and setting its status.
+ */
ldev->vdev.config = &lguest_config_ops;
/* And we remember the device's descriptor for lguest_config_ops. */
ldev->desc = d;
- /* register_virtio_device() sets up the generic fields for the struct
+ /*
+ * register_virtio_device() sets up the generic fields for the struct
* virtio_device and calls device_register(). This makes the bus
- * infrastructure look for a matching driver. */
+ * infrastructure look for a matching driver.
+ */
if (register_virtio_device(&ldev->vdev) != 0) {
printk(KERN_ERR "Failed to register lguest dev %u type %u\n",
offset, d->type);
}
}
-/*D:110 scan_devices() simply iterates through the device page. The type 0 is
- * reserved to mean "end of devices". */
+/*D:110
+ * scan_devices() simply iterates through the device page. The type 0 is
+ * reserved to mean "end of devices".
+ */
static void scan_devices(void)
{
unsigned int i;
}
}
-/*D:105 Fairly early in boot, lguest_devices_init() is called to set up the
+/*D:105
+ * Fairly early in boot, lguest_devices_init() is called to set up the
* lguest device infrastructure. We check that we are a Guest by checking
* pv_info.name: there are other ways of checking, but this seems most
* obvious to me.
* correct sysfs incantation).
*
* Finally we call scan_devices() which adds all the devices found in the
- * lguest_devices page. */
+ * lguest_devices page.
+ */
static int __init lguest_devices_init(void)
{
if (strcmp(pv_info.name, "lguest") != 0)
/* We do this after core stuff, but before the drivers. */
postcore_initcall(lguest_devices_init);
-/*D:150 At this point in the journey we used to now wade through the lguest
+/*D:150
+ * At this point in the journey we used to now wade through the lguest
* devices themselves: net, block and console. Since they're all now virtio
* devices rather than lguest-specific, I've decided to ignore them. Mostly,
* they're kind of boring. But this does mean you'll never experience the
* thrill of reading the forbidden love scene buried deep in the block driver.
*
* "make Launcher" beckons, where we answer questions like "Where do Guests
- * come from?", and "What do you do when someone asks for optimization?". */
+ * come from?", and "What do you do when someone asks for optimization?".
+ */
/*P:200 This contains all the /dev/lguest code, whereby the userspace launcher
* controls and communicates with the Guest. For example, the first write will
- * tell us the Guest's memory layout, pagetable, entry point and kernel address
- * offset. A read will run the Guest until something happens, such as a signal
- * or the Guest doing a NOTIFY out to the Launcher. :*/
+ * tell us the Guest's memory layout and entry point. A read will run the
+ * Guest until something happens, such as a signal or the Guest doing a NOTIFY
+ * out to the Launcher.
+:*/
#include <linux/uaccess.h>
#include <linux/miscdevice.h>
#include <linux/fs.h>
#include <linux/file.h>
#include "lg.h"
+/*L:056
+ * Before we move on, let's jump ahead and look at what the kernel does when
+ * it needs to look up the eventfds. That will complete our picture of how we
+ * use RCU.
+ *
+ * The notification value is in cpu->pending_notify: we return true if it went
+ * to an eventfd.
+ */
bool send_notify_to_eventfd(struct lg_cpu *cpu)
{
unsigned int i;
struct lg_eventfd_map *map;
- /* lg->eventfds is RCU-protected */
+ /*
+ * This "rcu_read_lock()" helps track when someone is still looking at
+ * the (RCU-using) eventfds array. It's not actually a lock at all;
+ * indeed it's a noop in many configurations. (You didn't expect me to
+ * explain all the RCU secrets here, did you?)
+ */
rcu_read_lock();
+ /*
+ * rcu_dereference is the counter-side of rcu_assign_pointer(); it
+ * makes sure we don't access the memory pointed to by
+ * cpu->lg->eventfds before cpu->lg->eventfds is set. Sounds crazy,
+ * but Alpha allows this! Paul McKenney points out that a really
+ * aggressive compiler could have the same effect:
+ * http://lists.ozlabs.org/pipermail/lguest/2009-July/001560.html
+ *
+ * So play safe, use rcu_dereference to get the rcu-protected pointer:
+ */
map = rcu_dereference(cpu->lg->eventfds);
+ /*
+ * Simple array search: even if they add an eventfd while we do this,
+ * we'll continue to use the old array and just won't see the new one.
+ */
for (i = 0; i < map->num; i++) {
if (map->map[i].addr == cpu->pending_notify) {
eventfd_signal(map->map[i].event, 1);
break;
}
}
+ /* We're done with the rcu-protected variable cpu->lg->eventfds. */
rcu_read_unlock();
+
+ /* If we cleared the notification, it's because we found a match. */
return cpu->pending_notify == 0;
}
+/*L:055
+ * One of the more tricksy tricks in the Linux Kernel is a technique called
+ * Read Copy Update. Since one point of lguest is to teach lguest journeyers
+ * about kernel coding, I use it here. (In case you're curious, other purposes
+ * include learning about virtualization and instilling a deep appreciation for
+ * simplicity and puppies).
+ *
+ * We keep a simple array which maps LHCALL_NOTIFY values to eventfds, but we
+ * add new eventfds without ever blocking readers from accessing the array.
+ * The current Launcher only does this during boot, so that never happens. But
+ * Read Copy Update is cool, and adding a lock risks damaging even more puppies
+ * than this code does.
+ *
+ * We allocate a brand new one-larger array, copy the old one and add our new
+ * element. Then we make the lg eventfd pointer point to the new array.
+ * That's the easy part: now we need to free the old one, but we need to make
+ * sure no slow CPU somewhere is still looking at it. That's what
+ * synchronize_rcu does for us: waits until every CPU has indicated that it has
+ * moved on to know it's no longer using the old one.
+ *
+ * If that's unclear, see http://en.wikipedia.org/wiki/Read-copy-update.
+ */
static int add_eventfd(struct lguest *lg, unsigned long addr, int fd)
{
struct lg_eventfd_map *new, *old = lg->eventfds;
+ /*
+ * We don't allow notifications on value 0 anyway (pending_notify of
+ * 0 means "nothing pending").
+ */
if (!addr)
return -EINVAL;
- /* Replace the old array with the new one, carefully: others can
- * be accessing it at the same time */
+ /*
+ * Replace the old array with the new one, carefully: others can
+ * be accessing it at the same time.
+ */
new = kmalloc(sizeof(*new) + sizeof(new->map[0]) * (old->num + 1),
GFP_KERNEL);
if (!new)
new->map[new->num].addr = addr;
new->map[new->num].event = eventfd_ctx_fdget(fd);
if (IS_ERR(new->map[new->num].event)) {
+ int err = PTR_ERR(new->map[new->num].event);
kfree(new);
- return PTR_ERR(new->map[new->num].event);
+ return err;
}
new->num++;
- /* Now put new one in place. */
+ /*
+ * Now put new one in place: rcu_assign_pointer() is a fancy way of
+ * doing "lg->eventfds = new", but it uses memory barriers to make
+ * absolutely sure that the contents of "new" written above is nailed
+ * down before we actually do the assignment.
+ *
+ * We have to think about these kinds of things when we're operating on
+ * live data without locks.
+ */
rcu_assign_pointer(lg->eventfds, new);
- /* We're not in a big hurry. Wait until noone's looking at old
- * version, then delete it. */
+ /*
+ * We're not in a big hurry. Wait until noone's looking at old
+ * version, then free it.
+ */
synchronize_rcu();
kfree(old);
return 0;
}
+/*L:052
+ * Receiving notifications from the Guest is usually done by attaching a
+ * particular LHCALL_NOTIFY value to an event filedescriptor. The eventfd will
+ * become readable when the Guest does an LHCALL_NOTIFY with that value.
+ *
+ * This is really convenient for processing each virtqueue in a separate
+ * thread.
+ */
static int attach_eventfd(struct lguest *lg, const unsigned long __user *input)
{
unsigned long addr, fd;
if (get_user(fd, input) != 0)
return -EFAULT;
+ /*
+ * Just make sure two callers don't add eventfds at once. We really
+ * only need to lock against callers adding to the same Guest, so using
+ * the Big Lguest Lock is overkill. But this is setup, not a fast path.
+ */
mutex_lock(&lguest_lock);
err = add_eventfd(lg, addr, fd);
mutex_unlock(&lguest_lock);
- return 0;
+ return err;
}
-/*L:050 Sending an interrupt is done by writing LHREQ_IRQ and an interrupt
- * number to /dev/lguest. */
+/*L:050
+ * Sending an interrupt is done by writing LHREQ_IRQ and an interrupt
+ * number to /dev/lguest.
+ */
static int user_send_irq(struct lg_cpu *cpu, const unsigned long __user *input)
{
unsigned long irq;
if (irq >= LGUEST_IRQS)
return -EINVAL;
+ /*
+ * Next time the Guest runs, the core code will see if it can deliver
+ * this interrupt.
+ */
set_interrupt(cpu, irq);
return 0;
}
-/*L:040 Once our Guest is initialized, the Launcher makes it run by reading
- * from /dev/lguest. */
+/*L:040
+ * Once our Guest is initialized, the Launcher makes it run by reading
+ * from /dev/lguest.
+ */
static ssize_t read(struct file *file, char __user *user, size_t size,loff_t*o)
{
struct lguest *lg = file->private_data;
return len;
}
- /* If we returned from read() last time because the Guest sent I/O,
- * clear the flag. */
+ /*
+ * If we returned from read() last time because the Guest sent I/O,
+ * clear the flag.
+ */
if (cpu->pending_notify)
cpu->pending_notify = 0;
return run_guest(cpu, (unsigned long __user *)user);
}
-/*L:025 This actually initializes a CPU. For the moment, a Guest is only
- * uniprocessor, so "id" is always 0. */
+/*L:025
+ * This actually initializes a CPU. For the moment, a Guest is only
+ * uniprocessor, so "id" is always 0.
+ */
static int lg_cpu_start(struct lg_cpu *cpu, unsigned id, unsigned long start_ip)
{
/* We have a limited number the number of CPUs in the lguest struct. */
/* Each CPU has a timer it can set. */
init_clockdev(cpu);
- /* We need a complete page for the Guest registers: they are accessible
- * to the Guest and we can only grant it access to whole pages. */
+ /*
+ * We need a complete page for the Guest registers: they are accessible
+ * to the Guest and we can only grant it access to whole pages.
+ */
cpu->regs_page = get_zeroed_page(GFP_KERNEL);
if (!cpu->regs_page)
return -ENOMEM;
/* We actually put the registers at the bottom of the page. */
cpu->regs = (void *)cpu->regs_page + PAGE_SIZE - sizeof(*cpu->regs);
- /* Now we initialize the Guest's registers, handing it the start
- * address. */
+ /*
+ * Now we initialize the Guest's registers, handing it the start
+ * address.
+ */
lguest_arch_setup_regs(cpu, start_ip);
- /* We keep a pointer to the Launcher task (ie. current task) for when
- * other Guests want to wake this one (eg. console input). */
+ /*
+ * We keep a pointer to the Launcher task (ie. current task) for when
+ * other Guests want to wake this one (eg. console input).
+ */
cpu->tsk = current;
- /* We need to keep a pointer to the Launcher's memory map, because if
+ /*
+ * We need to keep a pointer to the Launcher's memory map, because if
* the Launcher dies we need to clean it up. If we don't keep a
- * reference, it is destroyed before close() is called. */
+ * reference, it is destroyed before close() is called.
+ */
cpu->mm = get_task_mm(cpu->tsk);
- /* We remember which CPU's pages this Guest used last, for optimization
- * when the same Guest runs on the same CPU twice. */
+ /*
+ * We remember which CPU's pages this Guest used last, for optimization
+ * when the same Guest runs on the same CPU twice.
+ */
cpu->last_pages = NULL;
/* No error == success. */
return 0;
}
-/*L:020 The initialization write supplies 3 pointer sized (32 or 64 bit)
- * values (in addition to the LHREQ_INITIALIZE value). These are:
+/*L:020
+ * The initialization write supplies 3 pointer sized (32 or 64 bit) values (in
+ * addition to the LHREQ_INITIALIZE value). These are:
*
* base: The start of the Guest-physical memory inside the Launcher memory.
*
*/
static int initialize(struct file *file, const unsigned long __user *input)
{
- /* "struct lguest" contains everything we (the Host) know about a
- * Guest. */
+ /* "struct lguest" contains all we (the Host) know about a Guest. */
struct lguest *lg;
int err;
unsigned long args[3];
- /* We grab the Big Lguest lock, which protects against multiple
- * simultaneous initializations. */
+ /*
+ * We grab the Big Lguest lock, which protects against multiple
+ * simultaneous initializations.
+ */
mutex_lock(&lguest_lock);
/* You can't initialize twice! Close the device and start again... */
if (file->private_data) {
if (err)
goto free_eventfds;
- /* Initialize the Guest's shadow page tables, using the toplevel
- * address the Launcher gave us. This allocates memory, so can fail. */
+ /*
+ * Initialize the Guest's shadow page tables, using the toplevel
+ * address the Launcher gave us. This allocates memory, so can fail.
+ */
err = init_guest_pagetable(lg);
if (err)
goto free_regs;
return err;
}
-/*L:010 The first operation the Launcher does must be a write. All writes
+/*L:010
+ * The first operation the Launcher does must be a write. All writes
* start with an unsigned long number: for the first write this must be
* LHREQ_INITIALIZE to set up the Guest. After that the Launcher can use
- * writes of other values to send interrupts.
+ * writes of other values to send interrupts or set up receipt of notifications.
*
* Note that we overload the "offset" in the /dev/lguest file to indicate what
- * CPU number we're dealing with. Currently this is always 0, since we only
+ * CPU number we're dealing with. Currently this is always 0 since we only
* support uniprocessor Guests, but you can see the beginnings of SMP support
- * here. */
+ * here.
+ */
static ssize_t write(struct file *file, const char __user *in,
size_t size, loff_t *off)
{
- /* Once the Guest is initialized, we hold the "struct lguest" in the
- * file private data. */
+ /*
+ * Once the Guest is initialized, we hold the "struct lguest" in the
+ * file private data.
+ */
struct lguest *lg = file->private_data;
const unsigned long __user *input = (const unsigned long __user *)in;
unsigned long req;
}
}
-/*L:060 The final piece of interface code is the close() routine. It reverses
+/*L:060
+ * The final piece of interface code is the close() routine. It reverses
* everything done in initialize(). This is usually called because the
* Launcher exited.
*
* Note that the close routine returns 0 or a negative error number: it can't
* really fail, but it can whine. I blame Sun for this wart, and K&R C for
- * letting them do it. :*/
+ * letting them do it.
+:*/
static int close(struct inode *inode, struct file *file)
{
struct lguest *lg = file->private_data;
if (!lg)
return 0;
- /* We need the big lock, to protect from inter-guest I/O and other
- * Launchers initializing guests. */
+ /*
+ * We need the big lock, to protect from inter-guest I/O and other
+ * Launchers initializing guests.
+ */
mutex_lock(&lguest_lock);
/* Free up the shadow page tables for the Guest. */
hrtimer_cancel(&lg->cpus[i].hrt);
/* We can free up the register page we allocated. */
free_page(lg->cpus[i].regs_page);
- /* Now all the memory cleanups are done, it's safe to release
- * the Launcher's memory management structure. */
+ /*
+ * Now all the memory cleanups are done, it's safe to release
+ * the Launcher's memory management structure.
+ */
mmput(lg->cpus[i].mm);
}
eventfd_ctx_put(lg->eventfds->map[i].event);
kfree(lg->eventfds);
- /* If lg->dead doesn't contain an error code it will be NULL or a
- * kmalloc()ed string, either of which is ok to hand to kfree(). */
+ /*
+ * If lg->dead doesn't contain an error code it will be NULL or a
+ * kmalloc()ed string, either of which is ok to hand to kfree().
+ */
if (!IS_ERR(lg->dead))
kfree(lg->dead);
/* Free the memory allocated to the lguest_struct */
*
* We begin our understanding with the Host kernel interface which the Launcher
* uses: reading and writing a character device called /dev/lguest. All the
- * work happens in the read(), write() and close() routines: */
+ * work happens in the read(), write() and close() routines:
+ */
static struct file_operations lguest_fops = {
.owner = THIS_MODULE,
.release = close,
.read = read,
};
-/* This is a textbook example of a "misc" character device. Populate a "struct
- * miscdevice" and register it with misc_register(). */
+/*
+ * This is a textbook example of a "misc" character device. Populate a "struct
+ * miscdevice" and register it with misc_register().
+ */
static struct miscdevice lguest_dev = {
.minor = MISC_DYNAMIC_MINOR,
.name = "lguest",
-/*P:700 The pagetable code, on the other hand, still shows the scars of
+/*P:700
+ * The pagetable code, on the other hand, still shows the scars of
* previous encounters. It's functional, and as neat as it can be in the
* circumstances, but be wary, for these things are subtle and break easily.
* The Guest provides a virtual to physical mapping, but we can neither trust
* it nor use it: we verify and convert it here then point the CPU to the
- * converted Guest pages when running the Guest. :*/
+ * converted Guest pages when running the Guest.
+:*/
/* Copyright (C) Rusty Russell IBM Corporation 2006.
* GPL v2 and any later version */
#include <asm/bootparam.h>
#include "lg.h"
-/*M:008 We hold reference to pages, which prevents them from being swapped.
+/*M:008
+ * We hold reference to pages, which prevents them from being swapped.
* It'd be nice to have a callback in the "struct mm_struct" when Linux wants
* to swap out. If we had this, and a shrinker callback to trim PTE pages, we
- * could probably consider launching Guests as non-root. :*/
+ * could probably consider launching Guests as non-root.
+:*/
/*H:300
* The Page Table Code
*
- * We use two-level page tables for the Guest. If you're not entirely
- * comfortable with virtual addresses, physical addresses and page tables then
- * I recommend you review arch/x86/lguest/boot.c's "Page Table Handling" (with
- * diagrams!).
+ * We use two-level page tables for the Guest, or three-level with PAE. If
+ * you're not entirely comfortable with virtual addresses, physical addresses
+ * and page tables then I recommend you review arch/x86/lguest/boot.c's "Page
+ * Table Handling" (with diagrams!).
*
* The Guest keeps page tables, but we maintain the actual ones here: these are
* called "shadow" page tables. Which is a very Guest-centric name: these are
* (v) Flushing (throwing away) page tables,
* (vi) Mapping the Switcher when the Guest is about to run,
* (vii) Setting up the page tables initially.
- :*/
+:*/
-
-/* 1024 entries in a page table page maps 1024 pages: 4MB. The Switcher is
- * conveniently placed at the top 4MB, so it uses a separate, complete PTE
- * page. */
+/*
+ * The Switcher uses the complete top PTE page. That's 1024 PTE entries (4MB)
+ * or 512 PTE entries with PAE (2MB).
+ */
#define SWITCHER_PGD_INDEX (PTRS_PER_PGD - 1)
-/* For PAE we need the PMD index as well. We use the last 2MB, so we
- * will need the last pmd entry of the last pmd page. */
+/*
+ * For PAE we need the PMD index as well. We use the last 2MB, so we
+ * will need the last pmd entry of the last pmd page.
+ */
#ifdef CONFIG_X86_PAE
#define SWITCHER_PMD_INDEX (PTRS_PER_PMD - 1)
#define RESERVE_MEM 2U
#define CHECK_GPGD_MASK _PAGE_TABLE
#endif
-/* We actually need a separate PTE page for each CPU. Remember that after the
+/*
+ * We actually need a separate PTE page for each CPU. Remember that after the
* Switcher code itself comes two pages for each CPU, and we don't want this
- * CPU's guest to see the pages of any other CPU. */
+ * CPU's guest to see the pages of any other CPU.
+ */
static DEFINE_PER_CPU(pte_t *, switcher_pte_pages);
#define switcher_pte_page(cpu) per_cpu(switcher_pte_pages, cpu)
-/*H:320 The page table code is curly enough to need helper functions to keep it
- * clear and clean.
+/*H:320
+ * The page table code is curly enough to need helper functions to keep it
+ * clear and clean. The kernel itself provides many of them; one advantage
+ * of insisting that the Guest and Host use the same CONFIG_PAE setting.
*
* There are two functions which return pointers to the shadow (aka "real")
* page tables.
* spgd_addr() takes the virtual address and returns a pointer to the top-level
* page directory entry (PGD) for that address. Since we keep track of several
* page tables, the "i" argument tells us which one we're interested in (it's
- * usually the current one). */
+ * usually the current one).
+ */
static pgd_t *spgd_addr(struct lg_cpu *cpu, u32 i, unsigned long vaddr)
{
unsigned int index = pgd_index(vaddr);
}
#ifdef CONFIG_X86_PAE
-/* This routine then takes the PGD entry given above, which contains the
+/*
+ * This routine then takes the PGD entry given above, which contains the
* address of the PMD page. It then returns a pointer to the PMD entry for the
- * given address. */
+ * given address.
+ */
static pmd_t *spmd_addr(struct lg_cpu *cpu, pgd_t spgd, unsigned long vaddr)
{
unsigned int index = pmd_index(vaddr);
}
#endif
-/* This routine then takes the page directory entry returned above, which
+/*
+ * This routine then takes the page directory entry returned above, which
* contains the address of the page table entry (PTE) page. It then returns a
- * pointer to the PTE entry for the given address. */
+ * pointer to the PTE entry for the given address.
+ */
static pte_t *spte_addr(struct lg_cpu *cpu, pgd_t spgd, unsigned long vaddr)
{
#ifdef CONFIG_X86_PAE
return &page[pte_index(vaddr)];
}
-/* These two functions just like the above two, except they access the Guest
- * page tables. Hence they return a Guest address. */
+/*
+ * These functions are just like the above two, except they access the Guest
+ * page tables. Hence they return a Guest address.
+ */
static unsigned long gpgd_addr(struct lg_cpu *cpu, unsigned long vaddr)
{
unsigned int index = vaddr >> (PGDIR_SHIFT);
}
#ifdef CONFIG_X86_PAE
+/* Follow the PGD to the PMD. */
static unsigned long gpmd_addr(pgd_t gpgd, unsigned long vaddr)
{
unsigned long gpage = pgd_pfn(gpgd) << PAGE_SHIFT;
return gpage + pmd_index(vaddr) * sizeof(pmd_t);
}
+/* Follow the PMD to the PTE. */
static unsigned long gpte_addr(struct lg_cpu *cpu,
pmd_t gpmd, unsigned long vaddr)
{
return gpage + pte_index(vaddr) * sizeof(pte_t);
}
#else
+/* Follow the PGD to the PTE (no mid-level for !PAE). */
static unsigned long gpte_addr(struct lg_cpu *cpu,
pgd_t gpgd, unsigned long vaddr)
{
#endif
/*:*/
-/*M:014 get_pfn is slow: we could probably try to grab batches of pages here as
- * an optimization (ie. pre-faulting). :*/
+/*M:014
+ * get_pfn is slow: we could probably try to grab batches of pages here as
+ * an optimization (ie. pre-faulting).
+:*/
-/*H:350 This routine takes a page number given by the Guest and converts it to
+/*H:350
+ * This routine takes a page number given by the Guest and converts it to
* an actual, physical page number. It can fail for several reasons: the
* virtual address might not be mapped by the Launcher, the write flag is set
* and the page is read-only, or the write flag was set and the page was
* shared so had to be copied, but we ran out of memory.
*
* This holds a reference to the page, so release_pte() is careful to put that
- * back. */
+ * back.
+ */
static unsigned long get_pfn(unsigned long virtpfn, int write)
{
struct page *page;
return -1UL;
}
-/*H:340 Converting a Guest page table entry to a shadow (ie. real) page table
+/*H:340
+ * Converting a Guest page table entry to a shadow (ie. real) page table
* entry can be a little tricky. The flags are (almost) the same, but the
* Guest PTE contains a virtual page number: the CPU needs the real page
- * number. */
+ * number.
+ */
static pte_t gpte_to_spte(struct lg_cpu *cpu, pte_t gpte, int write)
{
unsigned long pfn, base, flags;
- /* The Guest sets the global flag, because it thinks that it is using
+ /*
+ * The Guest sets the global flag, because it thinks that it is using
* PGE. We only told it to use PGE so it would tell us whether it was
* flushing a kernel mapping or a userspace mapping. We don't actually
- * use the global bit, so throw it away. */
+ * use the global bit, so throw it away.
+ */
flags = (pte_flags(gpte) & ~_PAGE_GLOBAL);
/* The Guest's pages are offset inside the Launcher. */
base = (unsigned long)cpu->lg->mem_base / PAGE_SIZE;
- /* We need a temporary "unsigned long" variable to hold the answer from
+ /*
+ * We need a temporary "unsigned long" variable to hold the answer from
* get_pfn(), because it returns 0xFFFFFFFF on failure, which wouldn't
* fit in spte.pfn. get_pfn() finds the real physical number of the
- * page, given the virtual number. */
+ * page, given the virtual number.
+ */
pfn = get_pfn(base + pte_pfn(gpte), write);
if (pfn == -1UL) {
kill_guest(cpu, "failed to get page %lu", pte_pfn(gpte));
- /* When we destroy the Guest, we'll go through the shadow page
+ /*
+ * When we destroy the Guest, we'll go through the shadow page
* tables and release_pte() them. Make sure we don't think
- * this one is valid! */
+ * this one is valid!
+ */
flags = 0;
}
/* Now we assemble our shadow PTE from the page number and flags. */
/*H:460 And to complete the chain, release_pte() looks like this: */
static void release_pte(pte_t pte)
{
- /* Remember that get_user_pages_fast() took a reference to the page, in
- * get_pfn()? We have to put it back now. */
+ /*
+ * Remember that get_user_pages_fast() took a reference to the page, in
+ * get_pfn()? We have to put it back now.
+ */
if (pte_flags(pte) & _PAGE_PRESENT)
put_page(pte_page(pte));
}
* and return to the Guest without it knowing.
*
* If we fixed up the fault (ie. we mapped the address), this routine returns
- * true. Otherwise, it was a real fault and we need to tell the Guest. */
+ * true. Otherwise, it was a real fault and we need to tell the Guest.
+ */
bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
{
pgd_t gpgd;
pte_t gpte;
pte_t *spte;
+ /* Mid level for PAE. */
#ifdef CONFIG_X86_PAE
pmd_t *spmd;
pmd_t gpmd;
if (!(pgd_flags(*spgd) & _PAGE_PRESENT)) {
/* No shadow entry: allocate a new shadow PTE page. */
unsigned long ptepage = get_zeroed_page(GFP_KERNEL);
- /* This is not really the Guest's fault, but killing it is
- * simple for this corner case. */
+ /*
+ * This is not really the Guest's fault, but killing it is
+ * simple for this corner case.
+ */
if (!ptepage) {
kill_guest(cpu, "out of memory allocating pte page");
return false;
}
/* We check that the Guest pgd is OK. */
check_gpgd(cpu, gpgd);
- /* And we copy the flags to the shadow PGD entry. The page
- * number in the shadow PGD is the page we just allocated. */
+ /*
+ * And we copy the flags to the shadow PGD entry. The page
+ * number in the shadow PGD is the page we just allocated.
+ */
set_pgd(spgd, __pgd(__pa(ptepage) | pgd_flags(gpgd)));
}
#ifdef CONFIG_X86_PAE
gpmd = lgread(cpu, gpmd_addr(gpgd, vaddr), pmd_t);
- /* middle level not present? We can't map it in. */
+ /* Middle level not present? We can't map it in. */
if (!(pmd_flags(gpmd) & _PAGE_PRESENT))
return false;
/* No shadow entry: allocate a new shadow PTE page. */
unsigned long ptepage = get_zeroed_page(GFP_KERNEL);
- /* This is not really the Guest's fault, but killing it is
- * simple for this corner case. */
+ /*
+ * This is not really the Guest's fault, but killing it is
+ * simple for this corner case.
+ */
if (!ptepage) {
kill_guest(cpu, "out of memory allocating pte page");
return false;
/* We check that the Guest pmd is OK. */
check_gpmd(cpu, gpmd);
- /* And we copy the flags to the shadow PMD entry. The page
- * number in the shadow PMD is the page we just allocated. */
+ /*
+ * And we copy the flags to the shadow PMD entry. The page
+ * number in the shadow PMD is the page we just allocated.
+ */
native_set_pmd(spmd, __pmd(__pa(ptepage) | pmd_flags(gpmd)));
}
- /* OK, now we look at the lower level in the Guest page table: keep its
- * address, because we might update it later. */
+ /*
+ * OK, now we look at the lower level in the Guest page table: keep its
+ * address, because we might update it later.
+ */
gpte_ptr = gpte_addr(cpu, gpmd, vaddr);
#else
- /* OK, now we look at the lower level in the Guest page table: keep its
- * address, because we might update it later. */
+ /*
+ * OK, now we look at the lower level in the Guest page table: keep its
+ * address, because we might update it later.
+ */
gpte_ptr = gpte_addr(cpu, gpgd, vaddr);
#endif
+
+ /* Read the actual PTE value. */
gpte = lgread(cpu, gpte_ptr, pte_t);
/* If this page isn't in the Guest page tables, we can't page it in. */
if (!(pte_flags(gpte) & _PAGE_PRESENT))
return false;
- /* Check they're not trying to write to a page the Guest wants
- * read-only (bit 2 of errcode == write). */
+ /*
+ * Check they're not trying to write to a page the Guest wants
+ * read-only (bit 2 of errcode == write).
+ */
if ((errcode & 2) && !(pte_flags(gpte) & _PAGE_RW))
return false;
if ((errcode & 4) && !(pte_flags(gpte) & _PAGE_USER))
return false;
- /* Check that the Guest PTE flags are OK, and the page number is below
- * the pfn_limit (ie. not mapping the Launcher binary). */
+ /*
+ * Check that the Guest PTE flags are OK, and the page number is below
+ * the pfn_limit (ie. not mapping the Launcher binary).
+ */
check_gpte(cpu, gpte);
/* Add the _PAGE_ACCESSED and (for a write) _PAGE_DIRTY flag */
/* Get the pointer to the shadow PTE entry we're going to set. */
spte = spte_addr(cpu, *spgd, vaddr);
- /* If there was a valid shadow PTE entry here before, we release it.
- * This can happen with a write to a previously read-only entry. */
+
+ /*
+ * If there was a valid shadow PTE entry here before, we release it.
+ * This can happen with a write to a previously read-only entry.
+ */
release_pte(*spte);
- /* If this is a write, we insist that the Guest page is writable (the
- * final arg to gpte_to_spte()). */
+ /*
+ * If this is a write, we insist that the Guest page is writable (the
+ * final arg to gpte_to_spte()).
+ */
if (pte_dirty(gpte))
*spte = gpte_to_spte(cpu, gpte, 1);
else
- /* If this is a read, don't set the "writable" bit in the page
+ /*
+ * If this is a read, don't set the "writable" bit in the page
* table entry, even if the Guest says it's writable. That way
* we will come back here when a write does actually occur, so
- * we can update the Guest's _PAGE_DIRTY flag. */
+ * we can update the Guest's _PAGE_DIRTY flag.
+ */
native_set_pte(spte, gpte_to_spte(cpu, pte_wrprotect(gpte), 0));
- /* Finally, we write the Guest PTE entry back: we've set the
- * _PAGE_ACCESSED and maybe the _PAGE_DIRTY flags. */
+ /*
+ * Finally, we write the Guest PTE entry back: we've set the
+ * _PAGE_ACCESSED and maybe the _PAGE_DIRTY flags.
+ */
lgwrite(cpu, gpte_ptr, pte_t, gpte);
- /* The fault is fixed, the page table is populated, the mapping
+ /*
+ * The fault is fixed, the page table is populated, the mapping
* manipulated, the result returned and the code complete. A small
* delay and a trace of alliteration are the only indications the Guest
- * has that a page fault occurred at all. */
+ * has that a page fault occurred at all.
+ */
return true;
}
* mapped, so it's overkill.
*
* This is a quick version which answers the question: is this virtual address
- * mapped by the shadow page tables, and is it writable? */
+ * mapped by the shadow page tables, and is it writable?
+ */
static bool page_writable(struct lg_cpu *cpu, unsigned long vaddr)
{
pgd_t *spgd;
return false;
#endif
- /* Check the flags on the pte entry itself: it must be present and
- * writable. */
+ /*
+ * Check the flags on the pte entry itself: it must be present and
+ * writable.
+ */
flags = pte_flags(*(spte_addr(cpu, *spgd, vaddr)));
return (flags & (_PAGE_PRESENT|_PAGE_RW)) == (_PAGE_PRESENT|_PAGE_RW);
}
-/* So, when pin_stack_pages() asks us to pin a page, we check if it's already
+/*
+ * So, when pin_stack_pages() asks us to pin a page, we check if it's already
* in the page tables, and if not, we call demand_page() with error code 2
- * (meaning "write"). */
+ * (meaning "write").
+ */
void pin_page(struct lg_cpu *cpu, unsigned long vaddr)
{
if (!page_writable(cpu, vaddr) && !demand_page(cpu, vaddr, 2))
kill_guest(cpu, "bad stack page %#lx", vaddr);
}
+/*:*/
#ifdef CONFIG_X86_PAE
static void release_pmd(pmd_t *spmd)
}
#else /* !CONFIG_X86_PAE */
-/*H:450 If we chase down the release_pgd() code, it looks like this: */
+/*H:450
+ * If we chase down the release_pgd() code, the non-PAE version looks like
+ * this. The PAE version is almost identical, but instead of calling
+ * release_pte it calls release_pmd(), which looks much like this.
+ */
static void release_pgd(pgd_t *spgd)
{
/* If the entry's not present, there's nothing to release. */
if (pgd_flags(*spgd) & _PAGE_PRESENT) {
unsigned int i;
- /* Converting the pfn to find the actual PTE page is easy: turn
+ /*
+ * Converting the pfn to find the actual PTE page is easy: turn
* the page number into a physical address, then convert to a
- * virtual address (easy for kernel pages like this one). */
+ * virtual address (easy for kernel pages like this one).
+ */
pte_t *ptepage = __va(pgd_pfn(*spgd) << PAGE_SHIFT);
/* For each entry in the page, we might need to release it. */
for (i = 0; i < PTRS_PER_PTE; i++)
}
}
#endif
-/*H:445 We saw flush_user_mappings() twice: once from the flush_user_mappings()
+
+/*H:445
+ * We saw flush_user_mappings() twice: once from the flush_user_mappings()
* hypercall and once in new_pgdir() when we re-used a top-level pgdir page.
- * It simply releases every PTE page from 0 up to the Guest's kernel address. */
+ * It simply releases every PTE page from 0 up to the Guest's kernel address.
+ */
static void flush_user_mappings(struct lguest *lg, int idx)
{
unsigned int i;
release_pgd(lg->pgdirs[idx].pgdir + i);
}
-/*H:440 (v) Flushing (throwing away) page tables,
+/*H:440
+ * (v) Flushing (throwing away) page tables,
*
* The Guest has a hypercall to throw away the page tables: it's used when a
- * large number of mappings have been changed. */
+ * large number of mappings have been changed.
+ */
void guest_pagetable_flush_user(struct lg_cpu *cpu)
{
/* Drop the userspace part of the current page table. */
return pte_pfn(gpte) * PAGE_SIZE | (vaddr & ~PAGE_MASK);
}
-/* We keep several page tables. This is a simple routine to find the page
+/*
+ * We keep several page tables. This is a simple routine to find the page
* table (if any) corresponding to this top-level address the Guest has given
- * us. */
+ * us.
+ */
static unsigned int find_pgdir(struct lguest *lg, unsigned long pgtable)
{
unsigned int i;
return i;
}
-/*H:435 And this is us, creating the new page directory. If we really do
+/*H:435
+ * And this is us, creating the new page directory. If we really do
* allocate a new one (and so the kernel parts are not there), we set
- * blank_pgdir. */
+ * blank_pgdir.
+ */
static unsigned int new_pgdir(struct lg_cpu *cpu,
unsigned long gpgdir,
int *blank_pgdir)
pmd_t *pmd_table;
#endif
- /* We pick one entry at random to throw out. Choosing the Least
- * Recently Used might be better, but this is easy. */
+ /*
+ * We pick one entry at random to throw out. Choosing the Least
+ * Recently Used might be better, but this is easy.
+ */
next = random32() % ARRAY_SIZE(cpu->lg->pgdirs);
/* If it's never been allocated at all before, try now. */
if (!cpu->lg->pgdirs[next].pgdir) {
next = cpu->cpu_pgd;
else {
#ifdef CONFIG_X86_PAE
- /* In PAE mode, allocate a pmd page and populate the
- * last pgd entry. */
+ /*
+ * In PAE mode, allocate a pmd page and populate the
+ * last pgd entry.
+ */
pmd_table = (pmd_t *)get_zeroed_page(GFP_KERNEL);
if (!pmd_table) {
free_page((long)cpu->lg->pgdirs[next].pgdir);
set_pgd(cpu->lg->pgdirs[next].pgdir +
SWITCHER_PGD_INDEX,
__pgd(__pa(pmd_table) | _PAGE_PRESENT));
- /* This is a blank page, so there are no kernel
- * mappings: caller must map the stack! */
+ /*
+ * This is a blank page, so there are no kernel
+ * mappings: caller must map the stack!
+ */
*blank_pgdir = 1;
}
#else
return next;
}
-/*H:430 (iv) Switching page tables
+/*H:430
+ * (iv) Switching page tables
*
* Now we've seen all the page table setting and manipulation, let's see
* what happens when the Guest changes page tables (ie. changes the top-level
- * pgdir). This occurs on almost every context switch. */
+ * pgdir). This occurs on almost every context switch.
+ */
void guest_new_pagetable(struct lg_cpu *cpu, unsigned long pgtable)
{
int newpgdir, repin = 0;
/* Look to see if we have this one already. */
newpgdir = find_pgdir(cpu->lg, pgtable);
- /* If not, we allocate or mug an existing one: if it's a fresh one,
- * repin gets set to 1. */
+ /*
+ * If not, we allocate or mug an existing one: if it's a fresh one,
+ * repin gets set to 1.
+ */
if (newpgdir == ARRAY_SIZE(cpu->lg->pgdirs))
newpgdir = new_pgdir(cpu, pgtable, &repin);
/* Change the current pgd index to the new one. */
pin_stack_pages(cpu);
}
-/*H:470 Finally, a routine which throws away everything: all PGD entries in all
+/*H:470
+ * Finally, a routine which throws away everything: all PGD entries in all
* the shadow page tables, including the Guest's kernel mappings. This is used
- * when we destroy the Guest. */
+ * when we destroy the Guest.
+ */
static void release_all_pagetables(struct lguest *lg)
{
unsigned int i, j;
spgd = lg->pgdirs[i].pgdir + SWITCHER_PGD_INDEX;
pmdpage = __va(pgd_pfn(*spgd) << PAGE_SHIFT);
- /* And release the pmd entries of that pmd page,
- * except for the switcher pmd. */
+ /*
+ * And release the pmd entries of that pmd page,
+ * except for the switcher pmd.
+ */
for (k = 0; k < SWITCHER_PMD_INDEX; k++)
release_pmd(&pmdpage[k]);
#endif
}
}
-/* We also throw away everything when a Guest tells us it's changed a kernel
+/*
+ * We also throw away everything when a Guest tells us it's changed a kernel
* mapping. Since kernel mappings are in every page table, it's easiest to
* throw them all away. This traps the Guest in amber for a while as
- * everything faults back in, but it's rare. */
+ * everything faults back in, but it's rare.
+ */
void guest_pagetable_clear_all(struct lg_cpu *cpu)
{
release_all_pagetables(cpu->lg);
pin_stack_pages(cpu);
}
/*:*/
-/*M:009 Since we throw away all mappings when a kernel mapping changes, our
+
+/*M:009
+ * Since we throw away all mappings when a kernel mapping changes, our
* performance sucks for guests using highmem. In fact, a guest with
* PAGE_OFFSET 0xc0000000 (the default) and more than about 700MB of RAM is
* usually slower than a Guest with less memory.
*
* This, of course, cannot be fixed. It would take some kind of... well, I
- * don't know, but the term "puissant code-fu" comes to mind. :*/
+ * don't know, but the term "puissant code-fu" comes to mind.
+:*/
-/*H:420 This is the routine which actually sets the page table entry for then
+/*H:420
+ * This is the routine which actually sets the page table entry for then
* "idx"'th shadow page table.
*
* Normally, we can just throw out the old entry and replace it with 0: if they
spmd = spmd_addr(cpu, *spgd, vaddr);
if (pmd_flags(*spmd) & _PAGE_PRESENT) {
#endif
- /* Otherwise, we start by releasing
- * the existing entry. */
+ /* Otherwise, start by releasing the existing entry. */
pte_t *spte = spte_addr(cpu, *spgd, vaddr);
release_pte(*spte);
- /* If they're setting this entry as dirty or accessed,
- * we might as well put that entry they've given us
- * in now. This shaves 10% off a
- * copy-on-write micro-benchmark. */
+ /*
+ * If they're setting this entry as dirty or accessed,
+ * we might as well put that entry they've given us in
+ * now. This shaves 10% off a copy-on-write
+ * micro-benchmark.
+ */
if (pte_flags(gpte) & (_PAGE_DIRTY | _PAGE_ACCESSED)) {
check_gpte(cpu, gpte);
native_set_pte(spte,
gpte_to_spte(cpu, gpte,
pte_flags(gpte) & _PAGE_DIRTY));
- } else
- /* Otherwise kill it and we can demand_page()
- * it in later. */
+ } else {
+ /*
+ * Otherwise kill it and we can demand_page()
+ * it in later.
+ */
native_set_pte(spte, __pte(0));
+ }
#ifdef CONFIG_X86_PAE
}
#endif
}
}
-/*H:410 Updating a PTE entry is a little trickier.
+/*H:410
+ * Updating a PTE entry is a little trickier.
*
* We keep track of several different page tables (the Guest uses one for each
* process, so it makes sense to cache at least a few). Each of these have
* all the page tables, not just the current one. This is rare.
*
* The benefit is that when we have to track a new page table, we can keep all
- * the kernel mappings. This speeds up context switch immensely. */
+ * the kernel mappings. This speeds up context switch immensely.
+ */
void guest_set_pte(struct lg_cpu *cpu,
unsigned long gpgdir, unsigned long vaddr, pte_t gpte)
{
- /* Kernel mappings must be changed on all top levels. Slow, but doesn't
- * happen often. */
+ /*
+ * Kernel mappings must be changed on all top levels. Slow, but doesn't
+ * happen often.
+ */
if (vaddr >= cpu->lg->kernel_address) {
unsigned int i;
for (i = 0; i < ARRAY_SIZE(cpu->lg->pgdirs); i++)
/* ... throw it away. */
release_pgd(lg->pgdirs[pgdir].pgdir + idx);
}
+
#ifdef CONFIG_X86_PAE
+/* For setting a mid-level, we just throw everything away. It's easy. */
void guest_set_pmd(struct lguest *lg, unsigned long pmdp, u32 idx)
{
guest_pagetable_clear_all(&lg->cpus[0]);
}
#endif
-/* Once we know how much memory we have we can construct simple identity
- * (which set virtual == physical) and linear mappings
- * which will get the Guest far enough into the boot to create its own.
+/*H:505
+ * To get through boot, we construct simple identity page mappings (which
+ * set virtual == physical) and linear mappings which will get the Guest far
+ * enough into the boot to create its own. The linear mapping means we
+ * simplify the Guest boot, but it makes assumptions about their PAGE_OFFSET,
+ * as you'll see.
*
* We lay them out of the way, just below the initrd (which is why we need to
- * know its size here). */
+ * know its size here).
+ */
static unsigned long setup_pagetables(struct lguest *lg,
unsigned long mem,
unsigned long initrd_size)
unsigned int phys_linear;
#endif
- /* We have mapped_pages frames to map, so we need
- * linear_pages page tables to map them. */
+ /*
+ * We have mapped_pages frames to map, so we need linear_pages page
+ * tables to map them.
+ */
mapped_pages = mem / PAGE_SIZE;
linear_pages = (mapped_pages + PTRS_PER_PTE - 1) / PTRS_PER_PTE;
linear = (void *)pgdir - linear_pages * PAGE_SIZE;
#ifdef CONFIG_X86_PAE
+ /*
+ * And the single mid page goes below that. We only use one, but
+ * that's enough to map 1G, which definitely gets us through boot.
+ */
pmds = (void *)linear - PAGE_SIZE;
#endif
- /* Linear mapping is easy: put every page's address into the
- * mapping in order. */
+ /*
+ * Linear mapping is easy: put every page's address into the
+ * mapping in order.
+ */
for (i = 0; i < mapped_pages; i++) {
pte_t pte;
pte = pfn_pte(i, __pgprot(_PAGE_PRESENT|_PAGE_RW|_PAGE_USER));
return -EFAULT;
}
- /* The top level points to the linear page table pages above.
- * We setup the identity and linear mappings here. */
#ifdef CONFIG_X86_PAE
+ /*
+ * Make the Guest PMD entries point to the corresponding place in the
+ * linear mapping (up to one page worth of PMD).
+ */
for (i = j = 0; i < mapped_pages && j < PTRS_PER_PMD;
i += PTRS_PER_PTE, j++) {
+ /* FIXME: native_set_pmd is overkill here. */
native_set_pmd(&pmd, __pmd(((unsigned long)(linear + i)
- mem_base) | _PAGE_PRESENT | _PAGE_RW | _PAGE_USER));
return -EFAULT;
}
+ /* One PGD entry, pointing to that PMD page. */
set_pgd(&pgd, __pgd(((u32)pmds - mem_base) | _PAGE_PRESENT));
+ /* Copy it in as the first PGD entry (ie. addresses 0-1G). */
if (copy_to_user(&pgdir[0], &pgd, sizeof(pgd)) != 0)
return -EFAULT;
+ /*
+ * And the third PGD entry (ie. addresses 3G-4G).
+ *
+ * FIXME: This assumes that PAGE_OFFSET for the Guest is 0xC0000000.
+ */
if (copy_to_user(&pgdir[3], &pgd, sizeof(pgd)) != 0)
return -EFAULT;
#else
+ /*
+ * The top level points to the linear page table pages above.
+ * We setup the identity and linear mappings here.
+ */
phys_linear = (unsigned long)linear - mem_base;
for (i = 0; i < mapped_pages; i += PTRS_PER_PTE) {
pgd_t pgd;
+ /*
+ * Create a PGD entry which points to the right part of the
+ * linear PTE pages.
+ */
pgd = __pgd((phys_linear + i * sizeof(pte_t)) |
(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER));
+ /*
+ * Copy it into the PGD page at 0 and PAGE_OFFSET.
+ */
if (copy_to_user(&pgdir[i / PTRS_PER_PTE], &pgd, sizeof(pgd))
|| copy_to_user(&pgdir[pgd_index(PAGE_OFFSET)
+ i / PTRS_PER_PTE],
}
#endif
- /* We return the top level (guest-physical) address: remember where
- * this is. */
+ /*
+ * We return the top level (guest-physical) address: we remember where
+ * this is to write it into lguest_data when the Guest initializes.
+ */
return (unsigned long)pgdir - mem_base;
}
-/*H:500 (vii) Setting up the page tables initially.
+/*H:500
+ * (vii) Setting up the page tables initially.
*
* When a Guest is first created, the Launcher tells us where the toplevel of
- * its first page table is. We set some things up here: */
+ * its first page table is. We set some things up here:
+ */
int init_guest_pagetable(struct lguest *lg)
{
u64 mem;
pgd_t *pgd;
pmd_t *pmd_table;
#endif
- /* Get the Guest memory size and the ramdisk size from the boot header
- * located at lg->mem_base (Guest address 0). */
+ /*
+ * Get the Guest memory size and the ramdisk size from the boot header
+ * located at lg->mem_base (Guest address 0).
+ */
if (copy_from_user(&mem, &boot->e820_map[0].size, sizeof(mem))
|| get_user(initrd_size, &boot->hdr.ramdisk_size))
return -EFAULT;
- /* We start on the first shadow page table, and give it a blank PGD
- * page. */
+ /*
+ * We start on the first shadow page table, and give it a blank PGD
+ * page.
+ */
lg->pgdirs[0].gpgdir = setup_pagetables(lg, mem, initrd_size);
if (IS_ERR_VALUE(lg->pgdirs[0].gpgdir))
return lg->pgdirs[0].gpgdir;
lg->pgdirs[0].pgdir = (pgd_t *)get_zeroed_page(GFP_KERNEL);
if (!lg->pgdirs[0].pgdir)
return -ENOMEM;
+
#ifdef CONFIG_X86_PAE
+ /* For PAE, we also create the initial mid-level. */
pgd = lg->pgdirs[0].pgdir;
pmd_table = (pmd_t *) get_zeroed_page(GFP_KERNEL);
if (!pmd_table)
set_pgd(pgd + SWITCHER_PGD_INDEX,
__pgd(__pa(pmd_table) | _PAGE_PRESENT));
#endif
+
+ /* This is the current page table. */
lg->cpus[0].cpu_pgd = 0;
return 0;
}
-/* When the Guest calls LHCALL_LGUEST_INIT we do more setup. */
+/*H:508 When the Guest calls LHCALL_LGUEST_INIT we do more setup. */
void page_table_guest_data_init(struct lg_cpu *cpu)
{
/* We get the kernel address: above this is all kernel memory. */
if (get_user(cpu->lg->kernel_address,
&cpu->lg->lguest_data->kernel_address)
- /* We tell the Guest that it can't use the top 2 or 4 MB
- * of virtual addresses used by the Switcher. */
+ /*
+ * We tell the Guest that it can't use the top 2 or 4 MB
+ * of virtual addresses used by the Switcher.
+ */
|| put_user(RESERVE_MEM * 1024 * 1024,
&cpu->lg->lguest_data->reserve_mem)
|| put_user(cpu->lg->pgdirs[0].gpgdir,
&cpu->lg->lguest_data->pgdir))
kill_guest(cpu, "bad guest page %p", cpu->lg->lguest_data);
- /* In flush_user_mappings() we loop from 0 to
+ /*
+ * In flush_user_mappings() we loop from 0 to
* "pgd_index(lg->kernel_address)". This assumes it won't hit the
- * Switcher mappings, so check that now. */
+ * Switcher mappings, so check that now.
+ */
#ifdef CONFIG_X86_PAE
if (pgd_index(cpu->lg->kernel_address) == SWITCHER_PGD_INDEX &&
pmd_index(cpu->lg->kernel_address) == SWITCHER_PMD_INDEX)
free_page((long)lg->pgdirs[i].pgdir);
}
-/*H:480 (vi) Mapping the Switcher when the Guest is about to run.
+/*H:480
+ * (vi) Mapping the Switcher when the Guest is about to run.
*
* The Switcher and the two pages for this CPU need to be visible in the
* Guest (and not the pages for other CPUs). We have the appropriate PTE pages
* for each CPU already set up, we just need to hook them in now we know which
- * Guest is about to run on this CPU. */
+ * Guest is about to run on this CPU.
+ */
void map_switcher_in_guest(struct lg_cpu *cpu, struct lguest_pages *pages)
{
pte_t *switcher_pte_page = __get_cpu_var(switcher_pte_pages);
pmd_t switcher_pmd;
pmd_t *pmd_table;
+ /* FIXME: native_set_pmd is overkill here. */
native_set_pmd(&switcher_pmd, pfn_pmd(__pa(switcher_pte_page) >>
PAGE_SHIFT, PAGE_KERNEL_EXEC));
+ /* Figure out where the pmd page is, by reading the PGD, and converting
+ * it to a virtual address. */
pmd_table = __va(pgd_pfn(cpu->lg->
pgdirs[cpu->cpu_pgd].pgdir[SWITCHER_PGD_INDEX])
<< PAGE_SHIFT);
+ /* Now write it into the shadow page table. */
native_set_pmd(&pmd_table[SWITCHER_PMD_INDEX], switcher_pmd);
#else
pgd_t switcher_pgd;
- /* Make the last PGD entry for this Guest point to the Switcher's PTE
- * page for this CPU (with appropriate flags). */
+ /*
+ * Make the last PGD entry for this Guest point to the Switcher's PTE
+ * page for this CPU (with appropriate flags).
+ */
switcher_pgd = __pgd(__pa(switcher_pte_page) | __PAGE_KERNEL_EXEC);
cpu->lg->pgdirs[cpu->cpu_pgd].pgdir[SWITCHER_PGD_INDEX] = switcher_pgd;
#endif
- /* We also change the Switcher PTE page. When we're running the Guest,
+ /*
+ * We also change the Switcher PTE page. When we're running the Guest,
* we want the Guest's "regs" page to appear where the first Switcher
* page for this CPU is. This is an optimization: when the Switcher
* saves the Guest registers, it saves them into the first page of this
* CPU's "struct lguest_pages": if we make sure the Guest's register
* page is already mapped there, we don't have to copy them out
- * again. */
+ * again.
+ */
pfn = __pa(cpu->regs_page) >> PAGE_SHIFT;
native_set_pte(®s_pte, pfn_pte(pfn, PAGE_KERNEL));
native_set_pte(&switcher_pte_page[pte_index((unsigned long)pages)],
free_page((long)switcher_pte_page(i));
}
-/*H:520 Setting up the Switcher PTE page for given CPU is fairly easy, given
+/*H:520
+ * Setting up the Switcher PTE page for given CPU is fairly easy, given
* the CPU number and the "struct page"s for the Switcher code itself.
*
- * Currently the Switcher is less than a page long, so "pages" is always 1. */
+ * Currently the Switcher is less than a page long, so "pages" is always 1.
+ */
static __init void populate_switcher_pte_page(unsigned int cpu,
struct page *switcher_page[],
unsigned int pages)
native_set_pte(&pte[i], pfn_pte(page_to_pfn(switcher_page[i]),
__pgprot(_PAGE_PRESENT|_PAGE_ACCESSED|_PAGE_RW)));
- /* The second page contains the "struct lguest_ro_state", and is
- * read-only. */
+ /*
+ * The second page contains the "struct lguest_ro_state", and is
+ * read-only.
+ */
native_set_pte(&pte[i+1], pfn_pte(page_to_pfn(switcher_page[i+1]),
__pgprot(_PAGE_PRESENT|_PAGE_ACCESSED)));
}
-/* We've made it through the page table code. Perhaps our tired brains are
+/*
+ * We've made it through the page table code. Perhaps our tired brains are
* still processing the details, or perhaps we're simply glad it's over.
*
* If nothing else, note that all this complexity in juggling shadow page tables
* uses exotic direct Guest pagetable manipulation, and why both Intel and AMD
* have implemented shadow page table support directly into hardware.
*
- * There is just one file remaining in the Host. */
+ * There is just one file remaining in the Host.
+ */
-/*H:510 At boot or module load time, init_pagetables() allocates and populates
- * the Switcher PTE page for each CPU. */
+/*H:510
+ * At boot or module load time, init_pagetables() allocates and populates
+ * the Switcher PTE page for each CPU.
+ */
__init int init_pagetables(struct page **switcher_page, unsigned int pages)
{
unsigned int i;
-/*P:600 The x86 architecture has segments, which involve a table of descriptors
+/*P:600
+ * The x86 architecture has segments, which involve a table of descriptors
* which can be used to do funky things with virtual address interpretation.
* We originally used to use segments so the Guest couldn't alter the
* Guest<->Host Switcher, and then we had to trim Guest segments, and restore
*
* In these modern times, the segment handling code consists of simple sanity
* checks, and the worst you'll experience reading this code is butterfly-rash
- * from frolicking through its parklike serenity. :*/
+ * from frolicking through its parklike serenity.
+:*/
#include "lg.h"
/*H:600
* begin.
*/
-/* There are several entries we don't let the Guest set. The TSS entry is the
+/*
+ * There are several entries we don't let the Guest set. The TSS entry is the
* "Task State Segment" which controls all kinds of delicate things. The
* LGUEST_CS and LGUEST_DS entries are reserved for the Switcher, and the
- * the Guest can't be trusted to deal with double faults. */
+ * the Guest can't be trusted to deal with double faults.
+ */
static bool ignored_gdt(unsigned int num)
{
return (num == GDT_ENTRY_TSS
|| num == GDT_ENTRY_DOUBLEFAULT_TSS);
}
-/*H:630 Once the Guest gave us new GDT entries, we fix them up a little. We
+/*H:630
+ * Once the Guest gave us new GDT entries, we fix them up a little. We
* don't care if they're invalid: the worst that can happen is a General
* Protection Fault in the Switcher when it restores a Guest segment register
* which tries to use that entry. Then we kill the Guest for causing such a
- * mess: the message will be "unhandled trap 256". */
+ * mess: the message will be "unhandled trap 256".
+ */
static void fixup_gdt_table(struct lg_cpu *cpu, unsigned start, unsigned end)
{
unsigned int i;
for (i = start; i < end; i++) {
- /* We never copy these ones to real GDT, so we don't care what
- * they say */
+ /*
+ * We never copy these ones to real GDT, so we don't care what
+ * they say
+ */
if (ignored_gdt(i))
continue;
- /* Segment descriptors contain a privilege level: the Guest is
+ /*
+ * Segment descriptors contain a privilege level: the Guest is
* sometimes careless and leaves this as 0, even though it's
- * running at privilege level 1. If so, we fix it here. */
+ * running at privilege level 1. If so, we fix it here.
+ */
if ((cpu->arch.gdt[i].b & 0x00006000) == 0)
cpu->arch.gdt[i].b |= (GUEST_PL << 13);
- /* Each descriptor has an "accessed" bit. If we don't set it
+ /*
+ * Each descriptor has an "accessed" bit. If we don't set it
* now, the CPU will try to set it when the Guest first loads
* that entry into a segment register. But the GDT isn't
- * writable by the Guest, so bad things can happen. */
+ * writable by the Guest, so bad things can happen.
+ */
cpu->arch.gdt[i].b |= 0x00000100;
}
}
-/*H:610 Like the IDT, we never simply use the GDT the Guest gives us. We keep
+/*H:610
+ * Like the IDT, we never simply use the GDT the Guest gives us. We keep
* a GDT for each CPU, and copy across the Guest's entries each time we want to
* run the Guest on that CPU.
*
* This routine is called at boot or modprobe time for each CPU to set up the
* constant GDT entries: the ones which are the same no matter what Guest we're
- * running. */
+ * running.
+ */
void setup_default_gdt_entries(struct lguest_ro_state *state)
{
struct desc_struct *gdt = state->guest_gdt;
gdt[GDT_ENTRY_LGUEST_CS] = FULL_EXEC_SEGMENT;
gdt[GDT_ENTRY_LGUEST_DS] = FULL_SEGMENT;
- /* The TSS segment refers to the TSS entry for this particular CPU.
+ /*
+ * The TSS segment refers to the TSS entry for this particular CPU.
* Forgive the magic flags: the 0x8900 means the entry is Present, it's
* privilege level 0 Available 386 TSS system segment, and the 0x67
- * means Saturn is eclipsed by Mercury in the twelfth house. */
+ * means Saturn is eclipsed by Mercury in the twelfth house.
+ */
gdt[GDT_ENTRY_TSS].a = 0x00000067 | (tss << 16);
gdt[GDT_ENTRY_TSS].b = 0x00008900 | (tss & 0xFF000000)
| ((tss >> 16) & 0x000000FF);
}
-/* This routine sets up the initial Guest GDT for booting. All entries start
- * as 0 (unusable). */
+/*
+ * This routine sets up the initial Guest GDT for booting. All entries start
+ * as 0 (unusable).
+ */
void setup_guest_gdt(struct lg_cpu *cpu)
{
- /* Start with full 0-4G segments... */
+ /*
+ * Start with full 0-4G segments...except the Guest is allowed to use
+ * them, so set the privilege level appropriately in the flags.
+ */
cpu->arch.gdt[GDT_ENTRY_KERNEL_CS] = FULL_EXEC_SEGMENT;
cpu->arch.gdt[GDT_ENTRY_KERNEL_DS] = FULL_SEGMENT;
- /* ...except the Guest is allowed to use them, so set the privilege
- * level appropriately in the flags. */
cpu->arch.gdt[GDT_ENTRY_KERNEL_CS].b |= (GUEST_PL << 13);
cpu->arch.gdt[GDT_ENTRY_KERNEL_DS].b |= (GUEST_PL << 13);
}
-/*H:650 An optimization of copy_gdt(), for just the three "thead-local storage"
- * entries. */
+/*H:650
+ * An optimization of copy_gdt(), for just the three "thead-local storage"
+ * entries.
+ */
void copy_gdt_tls(const struct lg_cpu *cpu, struct desc_struct *gdt)
{
unsigned int i;
gdt[i] = cpu->arch.gdt[i];
}
-/*H:640 When the Guest is run on a different CPU, or the GDT entries have
- * changed, copy_gdt() is called to copy the Guest's GDT entries across to this
- * CPU's GDT. */
+/*H:640
+ * When the Guest is run on a different CPU, or the GDT entries have changed,
+ * copy_gdt() is called to copy the Guest's GDT entries across to this CPU's
+ * GDT.
+ */
void copy_gdt(const struct lg_cpu *cpu, struct desc_struct *gdt)
{
unsigned int i;
- /* The default entries from setup_default_gdt_entries() are not
- * replaced. See ignored_gdt() above. */
+ /*
+ * The default entries from setup_default_gdt_entries() are not
+ * replaced. See ignored_gdt() above.
+ */
for (i = 0; i < GDT_ENTRIES; i++)
if (!ignored_gdt(i))
gdt[i] = cpu->arch.gdt[i];
}
-/*H:620 This is where the Guest asks us to load a new GDT entry
- * (LHCALL_LOAD_GDT_ENTRY). We tweak the entry and copy it in. */
+/*H:620
+ * This is where the Guest asks us to load a new GDT entry
+ * (LHCALL_LOAD_GDT_ENTRY). We tweak the entry and copy it in.
+ */
void load_guest_gdt_entry(struct lg_cpu *cpu, u32 num, u32 lo, u32 hi)
{
- /* We assume the Guest has the same number of GDT entries as the
- * Host, otherwise we'd have to dynamically allocate the Guest GDT. */
+ /*
+ * We assume the Guest has the same number of GDT entries as the
+ * Host, otherwise we'd have to dynamically allocate the Guest GDT.
+ */
if (num >= ARRAY_SIZE(cpu->arch.gdt))
kill_guest(cpu, "too many gdt entries %i", num);
cpu->arch.gdt[num].a = lo;
cpu->arch.gdt[num].b = hi;
fixup_gdt_table(cpu, num, num+1);
- /* Mark that the GDT changed so the core knows it has to copy it again,
- * even if the Guest is run on the same CPU. */
+ /*
+ * Mark that the GDT changed so the core knows it has to copy it again,
+ * even if the Guest is run on the same CPU.
+ */
cpu->changed |= CHANGED_GDT;
}
-/* This is the fast-track version for just changing the three TLS entries.
+/*
+ * This is the fast-track version for just changing the three TLS entries.
* Remember that this happens on every context switch, so it's worth
* optimizing. But wouldn't it be neater to have a single hypercall to cover
- * both cases? */
+ * both cases?
+ */
void guest_load_tls(struct lg_cpu *cpu, unsigned long gtls)
{
struct desc_struct *tls = &cpu->arch.gdt[GDT_ENTRY_TLS_MIN];
/* Note that just the TLS entries have changed. */
cpu->changed |= CHANGED_GDT_TLS;
}
-/*:*/
/*H:660
* With this, we have finished the Host.
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-/*P:450 This file contains the x86-specific lguest code. It used to be all
+/*P:450
+ * This file contains the x86-specific lguest code. It used to be all
* mixed in with drivers/lguest/core.c but several foolhardy code slashers
* wrestled most of the dependencies out to here in preparation for porting
* lguest to other architectures (see what I mean by foolhardy?).
*
* This also contains a couple of non-obvious setup and teardown pieces which
- * were implemented after days of debugging pain. :*/
+ * were implemented after days of debugging pain.
+:*/
#include <linux/kernel.h>
#include <linux/start_kernel.h>
#include <linux/string.h>
*/
static void copy_in_guest_info(struct lg_cpu *cpu, struct lguest_pages *pages)
{
- /* Copying all this data can be quite expensive. We usually run the
+ /*
+ * Copying all this data can be quite expensive. We usually run the
* same Guest we ran last time (and that Guest hasn't run anywhere else
* meanwhile). If that's not the case, we pretend everything in the
- * Guest has changed. */
+ * Guest has changed.
+ */
if (__get_cpu_var(last_cpu) != cpu || cpu->last_pages != pages) {
__get_cpu_var(last_cpu) = cpu;
cpu->last_pages = pages;
cpu->changed = CHANGED_ALL;
}
- /* These copies are pretty cheap, so we do them unconditionally: */
- /* Save the current Host top-level page directory. */
+ /*
+ * These copies are pretty cheap, so we do them unconditionally: */
+ /* Save the current Host top-level page directory.
+ */
pages->state.host_cr3 = __pa(current->mm->pgd);
- /* Set up the Guest's page tables to see this CPU's pages (and no
- * other CPU's pages). */
+ /*
+ * Set up the Guest's page tables to see this CPU's pages (and no
+ * other CPU's pages).
+ */
map_switcher_in_guest(cpu, pages);
- /* Set up the two "TSS" members which tell the CPU what stack to use
+ /*
+ * Set up the two "TSS" members which tell the CPU what stack to use
* for traps which do directly into the Guest (ie. traps at privilege
- * level 1). */
+ * level 1).
+ */
pages->state.guest_tss.sp1 = cpu->esp1;
pages->state.guest_tss.ss1 = cpu->ss1;
/* This is a dummy value we need for GCC's sake. */
unsigned int clobber;
- /* Copy the guest-specific information into this CPU's "struct
- * lguest_pages". */
+ /*
+ * Copy the guest-specific information into this CPU's "struct
+ * lguest_pages".
+ */
copy_in_guest_info(cpu, pages);
- /* Set the trap number to 256 (impossible value). If we fault while
+ /*
+ * Set the trap number to 256 (impossible value). If we fault while
* switching to the Guest (bad segment registers or bug), this will
- * cause us to abort the Guest. */
+ * cause us to abort the Guest.
+ */
cpu->regs->trapnum = 256;
- /* Now: we push the "eflags" register on the stack, then do an "lcall".
+ /*
+ * Now: we push the "eflags" register on the stack, then do an "lcall".
* This is how we change from using the kernel code segment to using
* the dedicated lguest code segment, as well as jumping into the
* Switcher.
*
* The lcall also pushes the old code segment (KERNEL_CS) onto the
* stack, then the address of this call. This stack layout happens to
- * exactly match the stack layout created by an interrupt... */
+ * exactly match the stack layout created by an interrupt...
+ */
asm volatile("pushf; lcall *lguest_entry"
- /* This is how we tell GCC that %eax ("a") and %ebx ("b")
- * are changed by this routine. The "=" means output. */
+ /*
+ * This is how we tell GCC that %eax ("a") and %ebx ("b")
+ * are changed by this routine. The "=" means output.
+ */
: "=a"(clobber), "=b"(clobber)
- /* %eax contains the pages pointer. ("0" refers to the
+ /*
+ * %eax contains the pages pointer. ("0" refers to the
* 0-th argument above, ie "a"). %ebx contains the
* physical address of the Guest's top-level page
- * directory. */
+ * directory.
+ */
: "0"(pages), "1"(__pa(cpu->lg->pgdirs[cpu->cpu_pgd].pgdir))
- /* We tell gcc that all these registers could change,
+ /*
+ * We tell gcc that all these registers could change,
* which means we don't have to save and restore them in
- * the Switcher. */
+ * the Switcher.
+ */
: "memory", "%edx", "%ecx", "%edi", "%esi");
}
/*:*/
-/*M:002 There are hooks in the scheduler which we can register to tell when we
+/*M:002
+ * There are hooks in the scheduler which we can register to tell when we
* get kicked off the CPU (preempt_notifier_register()). This would allow us
* to lazily disable SYSENTER which would regain some performance, and should
* also simplify copy_in_guest_info(). Note that we'd still need to restore
* things when we exit to Launcher userspace, but that's fairly easy.
*
- * We could also try using this hooks for PGE, but that might be too expensive.
+ * We could also try using these hooks for PGE, but that might be too expensive.
*
- * The hooks were designed for KVM, but we can also put them to good use. :*/
+ * The hooks were designed for KVM, but we can also put them to good use.
+:*/
-/*H:040 This is the i386-specific code to setup and run the Guest. Interrupts
- * are disabled: we own the CPU. */
+/*H:040
+ * This is the i386-specific code to setup and run the Guest. Interrupts
+ * are disabled: we own the CPU.
+ */
void lguest_arch_run_guest(struct lg_cpu *cpu)
{
- /* Remember the awfully-named TS bit? If the Guest has asked to set it
+ /*
+ * Remember the awfully-named TS bit? If the Guest has asked to set it
* we set it now, so we can trap and pass that trap to the Guest if it
- * uses the FPU. */
+ * uses the FPU.
+ */
if (cpu->ts)
unlazy_fpu(current);
- /* SYSENTER is an optimized way of doing system calls. We can't allow
+ /*
+ * SYSENTER is an optimized way of doing system calls. We can't allow
* it because it always jumps to privilege level 0. A normal Guest
* won't try it because we don't advertise it in CPUID, but a malicious
* Guest (or malicious Guest userspace program) could, so we tell the
- * CPU to disable it before running the Guest. */
+ * CPU to disable it before running the Guest.
+ */
if (boot_cpu_has(X86_FEATURE_SEP))
wrmsr(MSR_IA32_SYSENTER_CS, 0, 0);
- /* Now we actually run the Guest. It will return when something
+ /*
+ * Now we actually run the Guest. It will return when something
* interesting happens, and we can examine its registers to see what it
- * was doing. */
+ * was doing.
+ */
run_guest_once(cpu, lguest_pages(raw_smp_processor_id()));
- /* Note that the "regs" structure contains two extra entries which are
+ /*
+ * Note that the "regs" structure contains two extra entries which are
* not really registers: a trap number which says what interrupt or
* trap made the switcher code come back, and an error code which some
- * traps set. */
+ * traps set.
+ */
/* Restore SYSENTER if it's supposed to be on. */
if (boot_cpu_has(X86_FEATURE_SEP))
wrmsr(MSR_IA32_SYSENTER_CS, __KERNEL_CS, 0);
- /* If the Guest page faulted, then the cr2 register will tell us the
+ /*
+ * If the Guest page faulted, then the cr2 register will tell us the
* bad virtual address. We have to grab this now, because once we
* re-enable interrupts an interrupt could fault and thus overwrite
- * cr2, or we could even move off to a different CPU. */
+ * cr2, or we could even move off to a different CPU.
+ */
if (cpu->regs->trapnum == 14)
cpu->arch.last_pagefault = read_cr2();
- /* Similarly, if we took a trap because the Guest used the FPU,
+ /*
+ * Similarly, if we took a trap because the Guest used the FPU,
* we have to restore the FPU it expects to see.
* math_state_restore() may sleep and we may even move off to
* a different CPU. So all the critical stuff should be done
- * before this. */
+ * before this.
+ */
else if (cpu->regs->trapnum == 7)
math_state_restore();
}
-/*H:130 Now we've examined the hypercall code; our Guest can make requests.
+/*H:130
+ * Now we've examined the hypercall code; our Guest can make requests.
* Our Guest is usually so well behaved; it never tries to do things it isn't
* allowed to, and uses hypercalls instead. Unfortunately, Linux's paravirtual
* infrastructure isn't quite complete, because it doesn't contain replacements
*
* When the Guest uses one of these instructions, we get a trap (General
* Protection Fault) and come here. We see if it's one of those troublesome
- * instructions and skip over it. We return true if we did. */
+ * instructions and skip over it. We return true if we did.
+ */
static int emulate_insn(struct lg_cpu *cpu)
{
u8 insn;
unsigned int insnlen = 0, in = 0, shift = 0;
- /* The eip contains the *virtual* address of the Guest's instruction:
- * guest_pa just subtracts the Guest's page_offset. */
+ /*
+ * The eip contains the *virtual* address of the Guest's instruction:
+ * guest_pa just subtracts the Guest's page_offset.
+ */
unsigned long physaddr = guest_pa(cpu, cpu->regs->eip);
- /* This must be the Guest kernel trying to do something, not userspace!
+ /*
+ * This must be the Guest kernel trying to do something, not userspace!
* The bottom two bits of the CS segment register are the privilege
- * level. */
+ * level.
+ */
if ((cpu->regs->cs & 3) != GUEST_PL)
return 0;
/* Decoding x86 instructions is icky. */
insn = lgread(cpu, physaddr, u8);
- /* 0x66 is an "operand prefix". It means it's using the upper 16 bits
- of the eax register. */
+ /*
+ * 0x66 is an "operand prefix". It means it's using the upper 16 bits
+ * of the eax register.
+ */
if (insn == 0x66) {
shift = 16;
/* The instruction is 1 byte so far, read the next byte. */
insn = lgread(cpu, physaddr + insnlen, u8);
}
- /* We can ignore the lower bit for the moment and decode the 4 opcodes
- * we need to emulate. */
+ /*
+ * We can ignore the lower bit for the moment and decode the 4 opcodes
+ * we need to emulate.
+ */
switch (insn & 0xFE) {
case 0xE4: /* in <next byte>,%al */
insnlen += 2;
return 0;
}
- /* If it was an "IN" instruction, they expect the result to be read
+ /*
+ * If it was an "IN" instruction, they expect the result to be read
* into %eax, so we change %eax. We always return all-ones, which
- * traditionally means "there's nothing there". */
+ * traditionally means "there's nothing there".
+ */
if (in) {
/* Lower bit tells is whether it's a 16 or 32 bit access */
if (insn & 0x1)
return 1;
}
-/* Our hypercalls mechanism used to be based on direct software interrupts.
+/*
+ * Our hypercalls mechanism used to be based on direct software interrupts.
* After Anthony's "Refactor hypercall infrastructure" kvm patch, we decided to
* change over to using kvm hypercalls.
*
*/
static void rewrite_hypercall(struct lg_cpu *cpu)
{
- /* This are the opcodes we use to patch the Guest. The opcode for "int
+ /*
+ * This are the opcodes we use to patch the Guest. The opcode for "int
* $0x1f" is "0xcd 0x1f" but vmcall instruction is 3 bytes long, so we
- * complete the sequence with a NOP (0x90). */
+ * complete the sequence with a NOP (0x90).
+ */
u8 insn[3] = {0xcd, 0x1f, 0x90};
__lgwrite(cpu, guest_pa(cpu, cpu->regs->eip), insn, sizeof(insn));
- /* The above write might have caused a copy of that page to be made
+ /*
+ * The above write might have caused a copy of that page to be made
* (if it was read-only). We need to make sure the Guest has
* up-to-date pagetables. As this doesn't happen often, we can just
- * drop them all. */
+ * drop them all.
+ */
guest_pagetable_clear_all(cpu);
}
{
u8 insn[3];
- /* This must be the Guest kernel trying to do something.
+ /*
+ * This must be the Guest kernel trying to do something.
* The bottom two bits of the CS segment register are the privilege
- * level. */
+ * level.
+ */
if ((cpu->regs->cs & 3) != GUEST_PL)
return false;
{
switch (cpu->regs->trapnum) {
case 13: /* We've intercepted a General Protection Fault. */
- /* Check if this was one of those annoying IN or OUT
+ /*
+ * Check if this was one of those annoying IN or OUT
* instructions which we need to emulate. If so, we just go
- * back into the Guest after we've done it. */
+ * back into the Guest after we've done it.
+ */
if (cpu->regs->errcode == 0) {
if (emulate_insn(cpu))
return;
}
- /* If KVM is active, the vmcall instruction triggers a
- * General Protection Fault. Normally it triggers an
- * invalid opcode fault (6): */
+ /*
+ * If KVM is active, the vmcall instruction triggers a General
+ * Protection Fault. Normally it triggers an invalid opcode
+ * fault (6):
+ */
case 6:
- /* We need to check if ring == GUEST_PL and
- * faulting instruction == vmcall. */
+ /*
+ * We need to check if ring == GUEST_PL and faulting
+ * instruction == vmcall.
+ */
if (is_hypercall(cpu)) {
rewrite_hypercall(cpu);
return;
}
break;
case 14: /* We've intercepted a Page Fault. */
- /* The Guest accessed a virtual address that wasn't mapped.
+ /*
+ * The Guest accessed a virtual address that wasn't mapped.
* This happens a lot: we don't actually set up most of the page
* tables for the Guest at all when we start: as it runs it asks
* for more and more, and we set them up as required. In this
* case, we don't even tell the Guest that the fault happened.
*
* The errcode tells whether this was a read or a write, and
- * whether kernel or userspace code. */
+ * whether kernel or userspace code.
+ */
if (demand_page(cpu, cpu->arch.last_pagefault,
cpu->regs->errcode))
return;
- /* OK, it's really not there (or not OK): the Guest needs to
+ /*
+ * OK, it's really not there (or not OK): the Guest needs to
* know. We write out the cr2 value so it knows where the
* fault occurred.
*
* Note that if the Guest were really messed up, this could
* happen before it's done the LHCALL_LGUEST_INIT hypercall, so
- * lg->lguest_data could be NULL */
+ * lg->lguest_data could be NULL
+ */
if (cpu->lg->lguest_data &&
put_user(cpu->arch.last_pagefault,
&cpu->lg->lguest_data->cr2))
kill_guest(cpu, "Writing cr2");
break;
case 7: /* We've intercepted a Device Not Available fault. */
- /* If the Guest doesn't want to know, we already restored the
- * Floating Point Unit, so we just continue without telling
- * it. */
+ /*
+ * If the Guest doesn't want to know, we already restored the
+ * Floating Point Unit, so we just continue without telling it.
+ */
if (!cpu->ts)
return;
break;
case 32 ... 255:
- /* These values mean a real interrupt occurred, in which case
+ /*
+ * These values mean a real interrupt occurred, in which case
* the Host handler has already been run. We just do a
* friendly check if another process should now be run, then
- * return to run the Guest again */
+ * return to run the Guest again
+ */
cond_resched();
return;
case LGUEST_TRAP_ENTRY:
- /* Our 'struct hcall_args' maps directly over our regs: we set
- * up the pointer now to indicate a hypercall is pending. */
+ /*
+ * Our 'struct hcall_args' maps directly over our regs: we set
+ * up the pointer now to indicate a hypercall is pending.
+ */
cpu->hcall = (struct hcall_args *)cpu->regs;
return;
}
/* We didn't handle the trap, so it needs to go to the Guest. */
if (!deliver_trap(cpu, cpu->regs->trapnum))
- /* If the Guest doesn't have a handler (either it hasn't
+ /*
+ * If the Guest doesn't have a handler (either it hasn't
* registered any yet, or it's one of the faults we don't let
- * it handle), it dies with this cryptic error message. */
+ * it handle), it dies with this cryptic error message.
+ */
kill_guest(cpu, "unhandled trap %li at %#lx (%#lx)",
cpu->regs->trapnum, cpu->regs->eip,
cpu->regs->trapnum == 14 ? cpu->arch.last_pagefault
: cpu->regs->errcode);
}
-/* Now we can look at each of the routines this calls, in increasing order of
+/*
+ * Now we can look at each of the routines this calls, in increasing order of
* complexity: do_hypercalls(), emulate_insn(), maybe_do_interrupt(),
* deliver_trap() and demand_page(). After all those, we'll be ready to
* examine the Switcher, and our philosophical understanding of the Host/Guest
- * duality will be complete. :*/
+ * duality will be complete.
+:*/
static void adjust_pge(void *on)
{
if (on)
write_cr4(read_cr4() & ~X86_CR4_PGE);
}
-/*H:020 Now the Switcher is mapped and every thing else is ready, we need to do
- * some more i386-specific initialization. */
+/*H:020
+ * Now the Switcher is mapped and every thing else is ready, we need to do
+ * some more i386-specific initialization.
+ */
void __init lguest_arch_host_init(void)
{
int i;
- /* Most of the i386/switcher.S doesn't care that it's been moved; on
+ /*
+ * Most of the i386/switcher.S doesn't care that it's been moved; on
* Intel, jumps are relative, and it doesn't access any references to
* external code or data.
*
* addresses are placed in a table (default_idt_entries), so we need to
* update the table with the new addresses. switcher_offset() is a
* convenience function which returns the distance between the
- * compiled-in switcher code and the high-mapped copy we just made. */
+ * compiled-in switcher code and the high-mapped copy we just made.
+ */
for (i = 0; i < IDT_ENTRIES; i++)
default_idt_entries[i] += switcher_offset();
for_each_possible_cpu(i) {
/* lguest_pages() returns this CPU's two pages. */
struct lguest_pages *pages = lguest_pages(i);
- /* This is a convenience pointer to make the code fit one
- * statement to a line. */
+ /* This is a convenience pointer to make the code neater. */
struct lguest_ro_state *state = &pages->state;
- /* The Global Descriptor Table: the Host has a different one
+ /*
+ * The Global Descriptor Table: the Host has a different one
* for each CPU. We keep a descriptor for the GDT which says
* where it is and how big it is (the size is actually the last
- * byte, not the size, hence the "-1"). */
+ * byte, not the size, hence the "-1").
+ */
state->host_gdt_desc.size = GDT_SIZE-1;
state->host_gdt_desc.address = (long)get_cpu_gdt_table(i);
- /* All CPUs on the Host use the same Interrupt Descriptor
+ /*
+ * All CPUs on the Host use the same Interrupt Descriptor
* Table, so we just use store_idt(), which gets this CPU's IDT
- * descriptor. */
+ * descriptor.
+ */
store_idt(&state->host_idt_desc);
- /* The descriptors for the Guest's GDT and IDT can be filled
+ /*
+ * The descriptors for the Guest's GDT and IDT can be filled
* out now, too. We copy the GDT & IDT into ->guest_gdt and
- * ->guest_idt before actually running the Guest. */
+ * ->guest_idt before actually running the Guest.
+ */
state->guest_idt_desc.size = sizeof(state->guest_idt)-1;
state->guest_idt_desc.address = (long)&state->guest_idt;
state->guest_gdt_desc.size = sizeof(state->guest_gdt)-1;
state->guest_gdt_desc.address = (long)&state->guest_gdt;
- /* We know where we want the stack to be when the Guest enters
+ /*
+ * We know where we want the stack to be when the Guest enters
* the Switcher: in pages->regs. The stack grows upwards, so
- * we start it at the end of that structure. */
+ * we start it at the end of that structure.
+ */
state->guest_tss.sp0 = (long)(&pages->regs + 1);
- /* And this is the GDT entry to use for the stack: we keep a
- * couple of special LGUEST entries. */
+ /*
+ * And this is the GDT entry to use for the stack: we keep a
+ * couple of special LGUEST entries.
+ */
state->guest_tss.ss0 = LGUEST_DS;
- /* x86 can have a finegrained bitmap which indicates what I/O
+ /*
+ * x86 can have a finegrained bitmap which indicates what I/O
* ports the process can use. We set it to the end of our
- * structure, meaning "none". */
+ * structure, meaning "none".
+ */
state->guest_tss.io_bitmap_base = sizeof(state->guest_tss);
- /* Some GDT entries are the same across all Guests, so we can
- * set them up now. */
+ /*
+ * Some GDT entries are the same across all Guests, so we can
+ * set them up now.
+ */
setup_default_gdt_entries(state);
/* Most IDT entries are the same for all Guests, too.*/
setup_default_idt_entries(state, default_idt_entries);
- /* The Host needs to be able to use the LGUEST segments on this
- * CPU, too, so put them in the Host GDT. */
+ /*
+ * The Host needs to be able to use the LGUEST segments on this
+ * CPU, too, so put them in the Host GDT.
+ */
get_cpu_gdt_table(i)[GDT_ENTRY_LGUEST_CS] = FULL_EXEC_SEGMENT;
get_cpu_gdt_table(i)[GDT_ENTRY_LGUEST_DS] = FULL_SEGMENT;
}
- /* In the Switcher, we want the %cs segment register to use the
+ /*
+ * In the Switcher, we want the %cs segment register to use the
* LGUEST_CS GDT entry: we've put that in the Host and Guest GDTs, so
* it will be undisturbed when we switch. To change %cs and jump we
- * need this structure to feed to Intel's "lcall" instruction. */
+ * need this structure to feed to Intel's "lcall" instruction.
+ */
lguest_entry.offset = (long)switch_to_guest + switcher_offset();
lguest_entry.segment = LGUEST_CS;
- /* Finally, we need to turn off "Page Global Enable". PGE is an
+ /*
+ * Finally, we need to turn off "Page Global Enable". PGE is an
* optimization where page table entries are specially marked to show
* they never change. The Host kernel marks all the kernel pages this
* way because it's always present, even when userspace is running.
* you'll get really weird bugs that you'll chase for two days.
*
* I used to turn PGE off every time we switched to the Guest and back
- * on when we return, but that slowed the Switcher down noticibly. */
+ * on when we return, but that slowed the Switcher down noticibly.
+ */
- /* We don't need the complexity of CPUs coming and going while we're
- * doing this. */
+ /*
+ * We don't need the complexity of CPUs coming and going while we're
+ * doing this.
+ */
get_online_cpus();
if (cpu_has_pge) { /* We have a broader idea of "global". */
/* Remember that this was originally set (for cleanup). */
cpu_had_pge = 1;
- /* adjust_pge is a helper function which sets or unsets the PGE
- * bit on its CPU, depending on the argument (0 == unset). */
+ /*
+ * adjust_pge is a helper function which sets or unsets the PGE
+ * bit on its CPU, depending on the argument (0 == unset).
+ */
on_each_cpu(adjust_pge, (void *)0, 1);
/* Turn off the feature in the global feature set. */
clear_cpu_cap(&boot_cpu_data, X86_FEATURE_PGE);
{
u32 tsc_speed;
- /* The pointer to the Guest's "struct lguest_data" is the only argument.
- * We check that address now. */
+ /*
+ * The pointer to the Guest's "struct lguest_data" is the only argument.
+ * We check that address now.
+ */
if (!lguest_address_ok(cpu->lg, cpu->hcall->arg1,
sizeof(*cpu->lg->lguest_data)))
return -EFAULT;
- /* Having checked it, we simply set lg->lguest_data to point straight
+ /*
+ * Having checked it, we simply set lg->lguest_data to point straight
* into the Launcher's memory at the right place and then use
* copy_to_user/from_user from now on, instead of lgread/write. I put
* this in to show that I'm not immune to writing stupid
- * optimizations. */
+ * optimizations.
+ */
cpu->lg->lguest_data = cpu->lg->mem_base + cpu->hcall->arg1;
- /* We insist that the Time Stamp Counter exist and doesn't change with
+ /*
+ * We insist that the Time Stamp Counter exist and doesn't change with
* cpu frequency. Some devious chip manufacturers decided that TSC
* changes could be handled in software. I decided that time going
* backwards might be good for benchmarks, but it's bad for users.
*
* We also insist that the TSC be stable: the kernel detects unreliable
- * TSCs for its own purposes, and we use that here. */
+ * TSCs for its own purposes, and we use that here.
+ */
if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC) && !check_tsc_unstable())
tsc_speed = tsc_khz;
else
}
/*:*/
-/*L:030 lguest_arch_setup_regs()
+/*L:030
+ * lguest_arch_setup_regs()
*
* Most of the Guest's registers are left alone: we used get_zeroed_page() to
- * allocate the structure, so they will be 0. */
+ * allocate the structure, so they will be 0.
+ */
void lguest_arch_setup_regs(struct lg_cpu *cpu, unsigned long start)
{
struct lguest_regs *regs = cpu->regs;
- /* There are four "segment" registers which the Guest needs to boot:
+ /*
+ * There are four "segment" registers which the Guest needs to boot:
* The "code segment" register (cs) refers to the kernel code segment
* __KERNEL_CS, and the "data", "extra" and "stack" segment registers
* refer to the kernel data segment __KERNEL_DS.
*
* The privilege level is packed into the lower bits. The Guest runs
- * at privilege level 1 (GUEST_PL).*/
+ * at privilege level 1 (GUEST_PL).
+ */
regs->ds = regs->es = regs->ss = __KERNEL_DS|GUEST_PL;
regs->cs = __KERNEL_CS|GUEST_PL;
- /* The "eflags" register contains miscellaneous flags. Bit 1 (0x002)
+ /*
+ * The "eflags" register contains miscellaneous flags. Bit 1 (0x002)
* is supposed to always be "1". Bit 9 (0x200) controls whether
* interrupts are enabled. We always leave interrupts enabled while
- * running the Guest. */
+ * running the Guest.
+ */
regs->eflags = X86_EFLAGS_IF | 0x2;
- /* The "Extended Instruction Pointer" register says where the Guest is
- * running. */
+ /*
+ * The "Extended Instruction Pointer" register says where the Guest is
+ * running.
+ */
regs->eip = start;
- /* %esi points to our boot information, at physical address 0, so don't
- * touch it. */
+ /*
+ * %esi points to our boot information, at physical address 0, so don't
+ * touch it.
+ */
- /* There are a couple of GDT entries the Guest expects when first
- * booting. */
+ /* There are a couple of GDT entries the Guest expects at boot. */
setup_guest_gdt(cpu);
}
-/*P:900 This is the Switcher: code which sits at 0xFFC00000 astride both the
- * Host and Guest to do the low-level Guest<->Host switch. It is as simple as
- * it can be made, but it's naturally very specific to x86.
+/*P:900
+ * This is the Switcher: code which sits at 0xFFC00000 (or 0xFFE00000) astride
+ * both the Host and Guest to do the low-level Guest<->Host switch. It is as
+ * simple as it can be made, but it's naturally very specific to x86.
*
* You have now completed Preparation. If this has whet your appetite; if you
* are feeling invigorated and refreshed then the next, more challenging stage
- * can be found in "make Guest". :*/
+ * can be found in "make Guest".
+ :*/
-/*M:012 Lguest is meant to be simple: my rule of thumb is that 1% more LOC must
+/*M:012
+ * Lguest is meant to be simple: my rule of thumb is that 1% more LOC must
* gain at least 1% more performance. Since neither LOC nor performance can be
* measured beforehand, it generally means implementing a feature then deciding
* if it's worth it. And once it's implemented, who can say no?
* Host (which is actually really easy).
*
* Two questions remain. Would the performance gain outweigh the complexity?
- * And who would write the verse documenting it? :*/
+ * And who would write the verse documenting it?
+:*/
-/*M:011 Lguest64 handles NMI. This gave me NMI envy (until I looked at their
+/*M:011
+ * Lguest64 handles NMI. This gave me NMI envy (until I looked at their
* code). It's worth doing though, since it would let us use oprofile in the
- * Host when a Guest is running. :*/
+ * Host when a Guest is running.
+:*/
/*S:100
* Welcome to the Switcher itself!
}
/* This could be BAD... when the ADB controller doesn't respond
* for this long, it's probably not coming back :-( */
- if(count >= 50) /* Hopefully shouldn't happen */
+ if (count > 50) /* Hopefully shouldn't happen */
printk(KERN_ERR "maciisi_send_request: poll timed out!\n");
}
{
struct crypt_config *cc = ti->private;
- return fn(ti, cc->dev, cc->start, data);
+ return fn(ti, cc->dev, cc->start, ti->len, data);
}
static struct target_type crypt_target = {
struct delay_c *dc = ti->private;
int ret = 0;
- ret = fn(ti, dc->dev_read, dc->start_read, data);
+ ret = fn(ti, dc->dev_read, dc->start_read, ti->len, data);
if (ret)
goto out;
if (dc->dev_write)
- ret = fn(ti, dc->dev_write, dc->start_write, data);
+ ret = fn(ti, dc->dev_write, dc->start_write, ti->len, data);
out:
return ret;
*/
chunk_size_ulong = round_up(chunk_size_ulong, PAGE_SIZE >> 9);
+ return dm_exception_store_set_chunk_size(store, chunk_size_ulong,
+ error);
+}
+
+int dm_exception_store_set_chunk_size(struct dm_exception_store *store,
+ unsigned long chunk_size_ulong,
+ char **error)
+{
/* Check chunk_size is a power of 2 */
if (!is_power_of_2(chunk_size_ulong)) {
*error = "Chunk size is not a power of 2";
return -EINVAL;
}
+ if (chunk_size_ulong > INT_MAX >> SECTOR_SHIFT) {
+ *error = "Chunk size is too high";
+ return -EINVAL;
+ }
+
store->chunk_size = chunk_size_ulong;
store->chunk_mask = chunk_size_ulong - 1;
store->chunk_shift = ffs(chunk_size_ulong) - 1;
int dm_exception_store_type_register(struct dm_exception_store_type *type);
int dm_exception_store_type_unregister(struct dm_exception_store_type *type);
+int dm_exception_store_set_chunk_size(struct dm_exception_store *store,
+ unsigned long chunk_size_ulong,
+ char **error);
+
int dm_exception_store_create(struct dm_target *ti, int argc, char **argv,
unsigned *args_used,
struct dm_exception_store **store);
{
struct linear_c *lc = ti->private;
- return fn(ti, lc->dev, lc->start, data);
+ return fn(ti, lc->dev, lc->start, ti->len, data);
}
static struct target_type linear_target = {
struct dm_target *ti;
uint32_t region_size;
region_t region_count;
+ uint64_t luid;
char uuid[DM_UUID_LEN];
char *usr_argv_str;
* restored.
*/
retry:
- r = dm_consult_userspace(uuid, request_type, data,
+ r = dm_consult_userspace(uuid, lc->luid, request_type, data,
data_size, rdata, rdata_size);
if (r != -ESRCH)
set_current_state(TASK_INTERRUPTIBLE);
schedule_timeout(2*HZ);
DMWARN("Attempting to contact userspace log server...");
- r = dm_consult_userspace(uuid, DM_ULOG_CTR, lc->usr_argv_str,
+ r = dm_consult_userspace(uuid, lc->luid, DM_ULOG_CTR,
+ lc->usr_argv_str,
strlen(lc->usr_argv_str) + 1,
NULL, NULL);
if (!r)
break;
}
DMINFO("Reconnected to userspace log server... DM_ULOG_CTR complete");
- r = dm_consult_userspace(uuid, DM_ULOG_RESUME, NULL,
+ r = dm_consult_userspace(uuid, lc->luid, DM_ULOG_RESUME, NULL,
0, NULL, NULL);
if (!r)
goto retry;
return -ENOMEM;
}
- for (i = 0, str_size = 0; i < argc; i++)
- str_size += sprintf(str + str_size, "%s ", argv[i]);
- str_size += sprintf(str + str_size, "%llu",
- (unsigned long long)ti->len);
+ str_size = sprintf(str, "%llu", (unsigned long long)ti->len);
+ for (i = 0; i < argc; i++)
+ str_size += sprintf(str + str_size, " %s", argv[i]);
*ctr_str = str;
return str_size;
return -ENOMEM;
}
+ /* The ptr value is sufficient for local unique id */
+ lc->luid = (uint64_t)lc;
+
lc->ti = ti;
if (strlen(argv[0]) > (DM_UUID_LEN - 1)) {
}
/* Send table string */
- r = dm_consult_userspace(lc->uuid, DM_ULOG_CTR,
+ r = dm_consult_userspace(lc->uuid, lc->luid, DM_ULOG_CTR,
ctr_str, str_size, NULL, NULL);
if (r == -ESRCH) {
/* Since the region size does not change, get it now */
rdata_size = sizeof(rdata);
- r = dm_consult_userspace(lc->uuid, DM_ULOG_GET_REGION_SIZE,
+ r = dm_consult_userspace(lc->uuid, lc->luid, DM_ULOG_GET_REGION_SIZE,
NULL, 0, (char *)&rdata, &rdata_size);
if (r) {
int r;
struct log_c *lc = log->context;
- r = dm_consult_userspace(lc->uuid, DM_ULOG_DTR,
+ r = dm_consult_userspace(lc->uuid, lc->luid, DM_ULOG_DTR,
NULL, 0,
NULL, NULL);
int r;
struct log_c *lc = log->context;
- r = dm_consult_userspace(lc->uuid, DM_ULOG_PRESUSPEND,
+ r = dm_consult_userspace(lc->uuid, lc->luid, DM_ULOG_PRESUSPEND,
NULL, 0,
NULL, NULL);
int r;
struct log_c *lc = log->context;
- r = dm_consult_userspace(lc->uuid, DM_ULOG_POSTSUSPEND,
+ r = dm_consult_userspace(lc->uuid, lc->luid, DM_ULOG_POSTSUSPEND,
NULL, 0,
NULL, NULL);
struct log_c *lc = log->context;
lc->in_sync_hint = 0;
- r = dm_consult_userspace(lc->uuid, DM_ULOG_RESUME,
+ r = dm_consult_userspace(lc->uuid, lc->luid, DM_ULOG_RESUME,
NULL, 0,
NULL, NULL);
char *result, unsigned maxlen)
{
int r = 0;
+ char *table_args;
size_t sz = (size_t)maxlen;
struct log_c *lc = log->context;
break;
case STATUSTYPE_TABLE:
sz = 0;
- DMEMIT("%s %u %s %s", log->type->name, lc->usr_argc + 1,
- lc->uuid, lc->usr_argv_str);
+ table_args = strchr(lc->usr_argv_str, ' ');
+ BUG_ON(!table_args); /* There will always be a ' ' */
+ table_args++;
+
+ DMEMIT("%s %u %s %s ", log->type->name, lc->usr_argc,
+ lc->uuid, table_args);
break;
}
return (r) ? 0 : (int)sz;
*(pkg->data_size) = 0;
} else if (tfr->data_size > *(pkg->data_size)) {
DMERR("Insufficient space to receive package [%u] "
- "(%u vs %lu)", tfr->request_type,
+ "(%u vs %zu)", tfr->request_type,
tfr->data_size, *(pkg->data_size));
*(pkg->data_size) = 0;
/**
* dm_consult_userspace
- * @uuid: log's uuid (must be DM_UUID_LEN in size)
+ * @uuid: log's universal unique identifier (must be DM_UUID_LEN in size)
+ * @luid: log's local unique identifier
* @request_type: found in include/linux/dm-log-userspace.h
* @data: data to tx to the server
* @data_size: size of data in bytes
*
* Returns: 0 on success, -EXXX on failure
**/
-int dm_consult_userspace(const char *uuid, int request_type,
+int dm_consult_userspace(const char *uuid, uint64_t luid, int request_type,
char *data, size_t data_size,
char *rdata, size_t *rdata_size)
{
memset(tfr, 0, DM_ULOG_PREALLOCED_SIZE - overhead_size);
memcpy(tfr->uuid, uuid, DM_UUID_LEN);
+ tfr->luid = luid;
tfr->seq = dm_ulog_seq++;
/*
int dm_ulog_tfr_init(void);
void dm_ulog_tfr_exit(void);
-int dm_consult_userspace(const char *uuid, int request_type,
+int dm_consult_userspace(const char *uuid, uint64_t luid, int request_type,
char *data, size_t data_size,
char *rdata, size_t *rdata_size);
list_for_each_entry(pg, &m->priority_groups, list) {
list_for_each_entry(p, &pg->pgpaths, list) {
- ret = fn(ti, p->path.dev, ti->begin, data);
+ ret = fn(ti, p->path.dev, ti->begin, ti->len, data);
if (ret)
goto out;
}
spin_lock_irq(&ms->lock);
bio_list_merge(&ms->writes, &requeue);
spin_unlock_irq(&ms->lock);
+ delayed_wake(ms);
}
/*
*/
dm_rh_inc_pending(ms->rh, &sync);
dm_rh_inc_pending(ms->rh, &nosync);
- ms->log_failure = dm_rh_flush(ms->rh) ? 1 : 0;
+
+ /*
+ * If the flush fails on a previous call and succeeds here,
+ * we must not reset the log_failure variable. We need
+ * userspace interaction to do that.
+ */
+ ms->log_failure = dm_rh_flush(ms->rh) ? 1 : ms->log_failure;
/*
* Dispatch io.
for (i = 0; !ret && i < ms->nr_mirrors; i++)
ret = fn(ti, ms->mirror[i].dev,
- ms->mirror[i].offset, data);
+ ms->mirror[i].offset, ti->len, data);
return ret;
}
*/
void *zero_area;
+ /*
+ * An area used for header. The header can be written
+ * concurrently with metadata (when invalidating the snapshot),
+ * so it needs a separate buffer.
+ */
+ void *header_area;
+
/*
* Used to keep track of which metadata area the data in
* 'chunk' refers to.
*/
ps->area = vmalloc(len);
if (!ps->area)
- return r;
+ goto err_area;
ps->zero_area = vmalloc(len);
- if (!ps->zero_area) {
- vfree(ps->area);
- return r;
- }
+ if (!ps->zero_area)
+ goto err_zero_area;
memset(ps->zero_area, 0, len);
+ ps->header_area = vmalloc(len);
+ if (!ps->header_area)
+ goto err_header_area;
+
return 0;
+
+err_header_area:
+ vfree(ps->zero_area);
+
+err_zero_area:
+ vfree(ps->area);
+
+err_area:
+ return r;
}
static void free_area(struct pstore *ps)
if (ps->zero_area)
vfree(ps->zero_area);
ps->zero_area = NULL;
+
+ if (ps->header_area)
+ vfree(ps->header_area);
+ ps->header_area = NULL;
}
struct mdata_req {
/*
* Read or write a chunk aligned and sized block of data from a device.
*/
-static int chunk_io(struct pstore *ps, chunk_t chunk, int rw, int metadata)
+static int chunk_io(struct pstore *ps, void *area, chunk_t chunk, int rw,
+ int metadata)
{
struct dm_io_region where = {
.bdev = ps->store->cow->bdev,
struct dm_io_request io_req = {
.bi_rw = rw,
.mem.type = DM_IO_VMA,
- .mem.ptr.vma = ps->area,
+ .mem.ptr.vma = area,
.client = ps->io_client,
.notify.fn = NULL,
};
chunk = area_location(ps, ps->current_area);
- r = chunk_io(ps, chunk, rw, 0);
+ r = chunk_io(ps, ps->area, chunk, rw, 0);
if (r)
return r;
static int zero_disk_area(struct pstore *ps, chunk_t area)
{
- struct dm_io_region where = {
- .bdev = ps->store->cow->bdev,
- .sector = ps->store->chunk_size * area_location(ps, area),
- .count = ps->store->chunk_size,
- };
- struct dm_io_request io_req = {
- .bi_rw = WRITE,
- .mem.type = DM_IO_VMA,
- .mem.ptr.vma = ps->zero_area,
- .client = ps->io_client,
- .notify.fn = NULL,
- };
-
- return dm_io(&io_req, 1, &where, NULL);
+ return chunk_io(ps, ps->zero_area, area_location(ps, area), WRITE, 0);
}
static int read_header(struct pstore *ps, int *new_snapshot)
struct disk_header *dh;
chunk_t chunk_size;
int chunk_size_supplied = 1;
+ char *chunk_err;
/*
* Use default chunk size (or hardsect_size, if larger) if none supplied
if (r)
return r;
- r = chunk_io(ps, 0, READ, 1);
+ r = chunk_io(ps, ps->header_area, 0, READ, 1);
if (r)
goto bad;
- dh = (struct disk_header *) ps->area;
+ dh = ps->header_area;
if (le32_to_cpu(dh->magic) == 0) {
*new_snapshot = 1;
ps->version = le32_to_cpu(dh->version);
chunk_size = le32_to_cpu(dh->chunk_size);
- if (!chunk_size_supplied || ps->store->chunk_size == chunk_size)
+ if (ps->store->chunk_size == chunk_size)
return 0;
- DMWARN("chunk size %llu in device metadata overrides "
- "table chunk size of %llu.",
- (unsigned long long)chunk_size,
- (unsigned long long)ps->store->chunk_size);
+ if (chunk_size_supplied)
+ DMWARN("chunk size %llu in device metadata overrides "
+ "table chunk size of %llu.",
+ (unsigned long long)chunk_size,
+ (unsigned long long)ps->store->chunk_size);
/* We had a bogus chunk_size. Fix stuff up. */
free_area(ps);
- ps->store->chunk_size = chunk_size;
- ps->store->chunk_mask = chunk_size - 1;
- ps->store->chunk_shift = ffs(chunk_size) - 1;
+ r = dm_exception_store_set_chunk_size(ps->store, chunk_size,
+ &chunk_err);
+ if (r) {
+ DMERR("invalid on-disk chunk size %llu: %s.",
+ (unsigned long long)chunk_size, chunk_err);
+ return r;
+ }
r = dm_io_client_resize(sectors_to_pages(ps->store->chunk_size),
ps->io_client);
{
struct disk_header *dh;
- memset(ps->area, 0, ps->store->chunk_size << SECTOR_SHIFT);
+ memset(ps->header_area, 0, ps->store->chunk_size << SECTOR_SHIFT);
- dh = (struct disk_header *) ps->area;
+ dh = ps->header_area;
dh->magic = cpu_to_le32(SNAP_MAGIC);
dh->valid = cpu_to_le32(ps->valid);
dh->version = cpu_to_le32(ps->version);
dh->chunk_size = cpu_to_le32(ps->store->chunk_size);
- return chunk_io(ps, 0, WRITE, 1);
+ return chunk_io(ps, ps->header_area, 0, WRITE, 1);
}
/*
ps->valid = 1;
ps->version = SNAPSHOT_DISK_VERSION;
ps->area = NULL;
+ ps->zero_area = NULL;
+ ps->header_area = NULL;
ps->next_free = 2; /* skipping the header and first area */
ps->current_committed = 0;
return 0;
}
+static int snapshot_iterate_devices(struct dm_target *ti,
+ iterate_devices_callout_fn fn, void *data)
+{
+ struct dm_snapshot *snap = ti->private;
+
+ return fn(ti, snap->origin, 0, ti->len, data);
+}
+
+
/*-----------------------------------------------------------------
* Origin methods
*---------------------------------------------------------------*/
return 0;
}
+static int origin_iterate_devices(struct dm_target *ti,
+ iterate_devices_callout_fn fn, void *data)
+{
+ struct dm_dev *dev = ti->private;
+
+ return fn(ti, dev, 0, ti->len, data);
+}
+
static struct target_type origin_target = {
.name = "snapshot-origin",
- .version = {1, 6, 0},
+ .version = {1, 7, 0},
.module = THIS_MODULE,
.ctr = origin_ctr,
.dtr = origin_dtr,
.map = origin_map,
.resume = origin_resume,
.status = origin_status,
+ .iterate_devices = origin_iterate_devices,
};
static struct target_type snapshot_target = {
.name = "snapshot",
- .version = {1, 6, 0},
+ .version = {1, 7, 0},
.module = THIS_MODULE,
.ctr = snapshot_ctr,
.dtr = snapshot_dtr,
.end_io = snapshot_end_io,
.resume = snapshot_resume,
.status = snapshot_status,
+ .iterate_devices = snapshot_iterate_devices,
};
static int __init dm_snapshot_init(void)
int ret = 0;
unsigned i = 0;
- do
+ do {
ret = fn(ti, sc->stripe[i].dev,
- sc->stripe[i].physical_start, data);
- while (!ret && ++i < sc->stripes);
+ sc->stripe[i].physical_start,
+ sc->stripe_width, data);
+ } while (!ret && ++i < sc->stripes);
return ret;
}
+static void stripe_io_hints(struct dm_target *ti,
+ struct queue_limits *limits)
+{
+ struct stripe_c *sc = ti->private;
+ unsigned chunk_size = (sc->chunk_mask + 1) << 9;
+
+ blk_limits_io_min(limits, chunk_size);
+ limits->io_opt = chunk_size * sc->stripes;
+}
+
static struct target_type stripe_target = {
.name = "striped",
- .version = {1, 2, 0},
+ .version = {1, 3, 0},
.module = THIS_MODULE,
.ctr = stripe_ctr,
.dtr = stripe_dtr,
.end_io = stripe_end_io,
.status = stripe_status,
.iterate_devices = stripe_iterate_devices,
+ .io_hints = stripe_io_hints,
};
int __init dm_stripe_init(void)
}
/*
- * If possible, this checks an area of a destination device is valid.
+ * If possible, this checks an area of a destination device is invalid.
*/
-static int device_area_is_valid(struct dm_target *ti, struct dm_dev *dev,
- sector_t start, void *data)
+static int device_area_is_invalid(struct dm_target *ti, struct dm_dev *dev,
+ sector_t start, sector_t len, void *data)
{
struct queue_limits *limits = data;
struct block_device *bdev = dev->bdev;
char b[BDEVNAME_SIZE];
if (!dev_size)
- return 1;
-
- if ((start >= dev_size) || (start + ti->len > dev_size)) {
- DMWARN("%s: %s too small for target",
- dm_device_name(ti->table->md), bdevname(bdev, b));
return 0;
+
+ if ((start >= dev_size) || (start + len > dev_size)) {
+ DMWARN("%s: %s too small for target: "
+ "start=%llu, len=%llu, dev_size=%llu",
+ dm_device_name(ti->table->md), bdevname(bdev, b),
+ (unsigned long long)start,
+ (unsigned long long)len,
+ (unsigned long long)dev_size);
+ return 1;
}
if (logical_block_size_sectors <= 1)
- return 1;
+ return 0;
if (start & (logical_block_size_sectors - 1)) {
DMWARN("%s: start=%llu not aligned to h/w "
- "logical block size %hu of %s",
+ "logical block size %u of %s",
dm_device_name(ti->table->md),
(unsigned long long)start,
limits->logical_block_size, bdevname(bdev, b));
- return 0;
+ return 1;
}
- if (ti->len & (logical_block_size_sectors - 1)) {
+ if (len & (logical_block_size_sectors - 1)) {
DMWARN("%s: len=%llu not aligned to h/w "
- "logical block size %hu of %s",
+ "logical block size %u of %s",
dm_device_name(ti->table->md),
- (unsigned long long)ti->len,
+ (unsigned long long)len,
limits->logical_block_size, bdevname(bdev, b));
- return 0;
+ return 1;
}
- return 1;
+ return 0;
}
/*
#define min_not_zero(l, r) (l == 0) ? r : ((r == 0) ? l : min(l, r))
int dm_set_device_limits(struct dm_target *ti, struct dm_dev *dev,
- sector_t start, void *data)
+ sector_t start, sector_t len, void *data)
{
struct queue_limits *limits = data;
struct block_device *bdev = dev->bdev;
}
if (blk_stack_limits(limits, &q->limits, start << 9) < 0)
- DMWARN("%s: target device %s is misaligned",
- dm_device_name(ti->table->md), bdevname(bdev, b));
+ DMWARN("%s: target device %s is misaligned: "
+ "physical_block_size=%u, logical_block_size=%u, "
+ "alignment_offset=%u, start=%llu",
+ dm_device_name(ti->table->md), bdevname(bdev, b),
+ q->limits.physical_block_size,
+ q->limits.logical_block_size,
+ q->limits.alignment_offset,
+ (unsigned long long) start << 9);
+
/*
* Check if merge fn is supported.
if (remaining) {
DMWARN("%s: table line %u (start sect %llu len %llu) "
- "not aligned to h/w logical block size %hu",
+ "not aligned to h/w logical block size %u",
dm_device_name(table->md), i,
(unsigned long long) ti->begin,
(unsigned long long) ti->len,
return t->type;
}
-bool dm_table_bio_based(struct dm_table *t)
-{
- return dm_table_get_type(t) == DM_TYPE_BIO_BASED;
-}
-
bool dm_table_request_based(struct dm_table *t)
{
return dm_table_get_type(t) == DM_TYPE_REQUEST_BASED;
ti->type->iterate_devices(ti, dm_set_device_limits,
&ti_limits);
+ /* Set I/O hints portion of queue limits */
+ if (ti->type->io_hints)
+ ti->type->io_hints(ti, &ti_limits);
+
/*
* Check each device area is consistent with the target's
* overall queue limits.
*/
- if (!ti->type->iterate_devices(ti, device_area_is_valid,
- &ti_limits))
+ if (ti->type->iterate_devices(ti, device_area_is_invalid,
+ &ti_limits))
return -EINVAL;
combine_limits:
dm_put(md);
}
+static void free_rq_clone(struct request *clone)
+{
+ struct dm_rq_target_io *tio = clone->end_io_data;
+
+ blk_rq_unprep_clone(clone);
+ free_rq_tio(tio);
+}
+
static void dm_unprep_request(struct request *rq)
{
struct request *clone = rq->special;
- struct dm_rq_target_io *tio = clone->end_io_data;
rq->special = NULL;
rq->cmd_flags &= ~REQ_DONTPREP;
- blk_rq_unprep_clone(clone);
- free_rq_tio(tio);
+ free_rq_clone(clone);
}
/*
rq->sense_len = clone->sense_len;
}
- BUG_ON(clone->bio);
- free_rq_tio(tio);
+ free_rq_clone(clone);
blk_end_request_all(rq, error);
goto out;
}
- /*
- * It is enought that blk_queue_ordered() is called only once when
- * the first bio-based table is bound.
- *
- * This setting should be moved to alloc_dev() when request-based dm
- * supports barrier.
- */
- if (!md->map && dm_table_bio_based(table))
- blk_queue_ordered(md->queue, QUEUE_ORDERED_DRAIN, NULL);
-
__unbind(md);
r = __bind(md, table, &limits);
int dm_table_any_busy_target(struct dm_table *t);
int dm_table_set_type(struct dm_table *t);
unsigned dm_table_get_type(struct dm_table *t);
-bool dm_table_bio_based(struct dm_table *t);
bool dm_table_request_based(struct dm_table *t);
int dm_table_alloc_md_mempools(struct dm_table *t);
void dm_table_free_md_mempools(struct dm_table *t);
mddev->queue->unplug_fn = linear_unplug;
mddev->queue->backing_dev_info.congested_fn = linear_congested;
mddev->queue->backing_dev_info.congested_data = mddev;
+ md_integrity_register(mddev);
return 0;
}
rcu_assign_pointer(mddev->private, newconf);
md_set_array_sectors(mddev, linear_size(mddev, 0, 0));
set_capacity(mddev->gendisk, mddev->array_sectors);
+ revalidate_disk(mddev->gendisk);
call_rcu(&oldconf->rcu, free_conf);
return 0;
}
else
new->md_minor = MINOR(unit) >> MdpMinorShift;
+ mutex_init(&new->open_mutex);
mutex_init(&new->reconfig_mutex);
INIT_LIST_HEAD(&new->disks);
INIT_LIST_HEAD(&new->all_mddevs);
}
if (mddev->level != LEVEL_MULTIPATH) {
int role;
- role = le16_to_cpu(sb->dev_roles[rdev->desc_nr]);
+ if (rdev->desc_nr < 0 ||
+ rdev->desc_nr >= le32_to_cpu(sb->max_dev)) {
+ role = 0xffff;
+ rdev->desc_nr = -1;
+ } else
+ role = le16_to_cpu(sb->dev_roles[rdev->desc_nr]);
switch(role) {
case 0xffff: /* spare */
break;
if (rdev2->desc_nr+1 > max_dev)
max_dev = rdev2->desc_nr+1;
- if (max_dev > le32_to_cpu(sb->max_dev))
+ if (max_dev > le32_to_cpu(sb->max_dev)) {
+ int bmask;
sb->max_dev = cpu_to_le32(max_dev);
+ rdev->sb_size = max_dev * 2 + 256;
+ bmask = queue_logical_block_size(rdev->bdev->bd_disk->queue)-1;
+ if (rdev->sb_size & bmask)
+ rdev->sb_size = (rdev->sb_size | bmask) + 1;
+ }
for (i=0; i<max_dev;i++)
sb->dev_roles[i] = cpu_to_le16(0xfffe);
static LIST_HEAD(pending_raid_disks);
-static void md_integrity_check(mdk_rdev_t *rdev, mddev_t *mddev)
+/*
+ * Try to register data integrity profile for an mddev
+ *
+ * This is called when an array is started and after a disk has been kicked
+ * from the array. It only succeeds if all working and active component devices
+ * are integrity capable with matching profiles.
+ */
+int md_integrity_register(mddev_t *mddev)
+{
+ mdk_rdev_t *rdev, *reference = NULL;
+
+ if (list_empty(&mddev->disks))
+ return 0; /* nothing to do */
+ if (blk_get_integrity(mddev->gendisk))
+ return 0; /* already registered */
+ list_for_each_entry(rdev, &mddev->disks, same_set) {
+ /* skip spares and non-functional disks */
+ if (test_bit(Faulty, &rdev->flags))
+ continue;
+ if (rdev->raid_disk < 0)
+ continue;
+ /*
+ * If at least one rdev is not integrity capable, we can not
+ * enable data integrity for the md device.
+ */
+ if (!bdev_get_integrity(rdev->bdev))
+ return -EINVAL;
+ if (!reference) {
+ /* Use the first rdev as the reference */
+ reference = rdev;
+ continue;
+ }
+ /* does this rdev's profile match the reference profile? */
+ if (blk_integrity_compare(reference->bdev->bd_disk,
+ rdev->bdev->bd_disk) < 0)
+ return -EINVAL;
+ }
+ /*
+ * All component devices are integrity capable and have matching
+ * profiles, register the common profile for the md device.
+ */
+ if (blk_integrity_register(mddev->gendisk,
+ bdev_get_integrity(reference->bdev)) != 0) {
+ printk(KERN_ERR "md: failed to register integrity for %s\n",
+ mdname(mddev));
+ return -EINVAL;
+ }
+ printk(KERN_NOTICE "md: data integrity on %s enabled\n",
+ mdname(mddev));
+ return 0;
+}
+EXPORT_SYMBOL(md_integrity_register);
+
+/* Disable data integrity if non-capable/non-matching disk is being added */
+void md_integrity_add_rdev(mdk_rdev_t *rdev, mddev_t *mddev)
{
- struct mdk_personality *pers = mddev->pers;
- struct gendisk *disk = mddev->gendisk;
struct blk_integrity *bi_rdev = bdev_get_integrity(rdev->bdev);
- struct blk_integrity *bi_mddev = blk_get_integrity(disk);
+ struct blk_integrity *bi_mddev = blk_get_integrity(mddev->gendisk);
- /* Data integrity passthrough not supported on RAID 4, 5 and 6 */
- if (pers && pers->level >= 4 && pers->level <= 6)
+ if (!bi_mddev) /* nothing to do */
return;
-
- /* If rdev is integrity capable, register profile for mddev */
- if (!bi_mddev && bi_rdev) {
- if (blk_integrity_register(disk, bi_rdev))
- printk(KERN_ERR "%s: %s Could not register integrity!\n",
- __func__, disk->disk_name);
- else
- printk(KERN_NOTICE "Enabling data integrity on %s\n",
- disk->disk_name);
+ if (rdev->raid_disk < 0) /* skip spares */
return;
- }
-
- /* Check that mddev and rdev have matching profiles */
- if (blk_integrity_compare(disk, rdev->bdev->bd_disk) < 0) {
- printk(KERN_ERR "%s: %s/%s integrity mismatch!\n", __func__,
- disk->disk_name, rdev->bdev->bd_disk->disk_name);
- printk(KERN_NOTICE "Disabling data integrity on %s\n",
- disk->disk_name);
- blk_integrity_unregister(disk);
- }
+ if (bi_rdev && blk_integrity_compare(mddev->gendisk,
+ rdev->bdev->bd_disk) >= 0)
+ return;
+ printk(KERN_NOTICE "disabling data integrity on %s\n", mdname(mddev));
+ blk_integrity_unregister(mddev->gendisk);
}
+EXPORT_SYMBOL(md_integrity_add_rdev);
static int bind_rdev_to_array(mdk_rdev_t * rdev, mddev_t * mddev)
{
/* May as well allow recovery to be retried once */
mddev->recovery_disabled = 0;
- md_integrity_check(rdev, mddev);
return 0;
fail:
/* otherwise we have to go forward and ... */
mddev->events ++;
if (!mddev->in_sync || mddev->recovery_cp != MaxSector) { /* not clean */
- /* .. if the array isn't clean, insist on an odd 'events' */
- if ((mddev->events&1)==0) {
- mddev->events++;
+ /* .. if the array isn't clean, an 'even' event must also go
+ * to spares. */
+ if ((mddev->events&1)==0)
nospares = 0;
- }
} else {
- /* otherwise insist on an even 'events' (for clean states) */
- if ((mddev->events&1)) {
- mddev->events++;
+ /* otherwise an 'odd' event must go to spares */
+ if ((mddev->events&1))
nospares = 0;
- }
}
}
ssize_t rv = len;
struct mdk_personality *pers;
void *priv;
+ mdk_rdev_t *rdev;
if (mddev->pers == NULL) {
if (len == 0)
mddev_suspend(mddev);
mddev->pers->stop(mddev);
module_put(mddev->pers->owner);
+ /* Invalidate devices that are now superfluous */
+ list_for_each_entry(rdev, &mddev->disks, same_set)
+ if (rdev->raid_disk >= mddev->raid_disks) {
+ rdev->raid_disk = -1;
+ clear_bit(In_sync, &rdev->flags);
+ }
mddev->pers = pers;
mddev->private = priv;
strlcpy(mddev->clevel, pers->name, sizeof(mddev->clevel));
if (max < mddev->resync_min)
return -EINVAL;
if (max < mddev->resync_max &&
+ mddev->ro == 0 &&
test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
return -EBUSY;
mddev->array_sectors = sectors;
set_capacity(mddev->gendisk, mddev->array_sectors);
- if (mddev->pers) {
- struct block_device *bdev = bdget_disk(mddev->gendisk, 0);
-
- if (bdev) {
- mutex_lock(&bdev->bd_inode->i_mutex);
- i_size_write(bdev->bd_inode,
- (loff_t)mddev->array_sectors << 9);
- mutex_unlock(&bdev->bd_inode->i_mutex);
- bdput(bdev);
- }
- }
+ if (mddev->pers)
+ revalidate_disk(mddev->gendisk);
return len;
}
}
strlcpy(mddev->clevel, pers->name, sizeof(mddev->clevel));
- if (pers->level >= 4 && pers->level <= 6)
- /* Cannot support integrity (yet) */
- blk_integrity_unregister(mddev->gendisk);
-
if (mddev->reshape_position != MaxSector &&
pers->start_reshape == NULL) {
/* This personality cannot handle reshaping... */
md_wakeup_thread(mddev->thread);
md_wakeup_thread(mddev->sync_thread); /* possibly kick off a reshape */
+ revalidate_disk(mddev->gendisk);
mddev->changed = 1;
md_new_event(mddev);
sysfs_notify_dirent(mddev->sysfs_state);
struct gendisk *disk = mddev->gendisk;
mdk_rdev_t *rdev;
+ mutex_lock(&mddev->open_mutex);
if (atomic_read(&mddev->openers) > is_open) {
printk("md: %s still in use.\n",mdname(mddev));
- return -EBUSY;
- }
-
- if (mddev->pers) {
+ err = -EBUSY;
+ } else if (mddev->pers) {
if (mddev->sync_thread) {
set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
if (mode == 1)
set_disk_ro(disk, 1);
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
+ err = 0;
}
-
+out:
+ mutex_unlock(&mddev->open_mutex);
+ if (err)
+ return err;
/*
* Free resources if final stop
*/
blk_integrity_unregister(disk);
md_new_event(mddev);
sysfs_notify_dirent(mddev->sysfs_state);
-out:
return err;
}
return -ENOSPC;
}
rv = mddev->pers->resize(mddev, num_sectors);
- if (!rv) {
- struct block_device *bdev;
-
- bdev = bdget_disk(mddev->gendisk, 0);
- if (bdev) {
- mutex_lock(&bdev->bd_inode->i_mutex);
- i_size_write(bdev->bd_inode,
- (loff_t)mddev->array_sectors << 9);
- mutex_unlock(&bdev->bd_inode->i_mutex);
- bdput(bdev);
- }
- }
+ if (!rv)
+ revalidate_disk(mddev->gendisk);
return rv;
}
}
BUG_ON(mddev != bdev->bd_disk->private_data);
- if ((err = mutex_lock_interruptible_nested(&mddev->reconfig_mutex, 1)))
+ if ((err = mutex_lock_interruptible(&mddev->open_mutex)))
goto out;
err = 0;
atomic_inc(&mddev->openers);
- mddev_unlock(mddev);
+ mutex_unlock(&mddev->open_mutex);
check_disk_change(bdev);
out:
* so we don't loop trying */
int in_sync; /* know to not need resync */
+ /* 'open_mutex' avoids races between 'md_open' and 'do_md_stop', so
+ * that we are never stopping an array while it is open.
+ * 'reconfig_mutex' protects all other reconfiguration.
+ * These locks are separate due to conflicting interactions
+ * with bdev->bd_mutex.
+ * Lock ordering is:
+ * reconfig_mutex -> bd_mutex : e.g. do_md_run -> revalidate_disk
+ * bd_mutex -> open_mutex: e.g. __blkdev_get -> md_open
+ */
+ struct mutex open_mutex;
struct mutex reconfig_mutex;
atomic_t active; /* general refcount */
atomic_t openers; /* number of active opens */
extern void md_wait_for_blocked_rdev(mdk_rdev_t *rdev, mddev_t *mddev);
extern void md_set_array_sectors(mddev_t *mddev, sector_t array_sectors);
extern int md_check_no_bitmap(mddev_t *mddev);
+extern int md_integrity_register(mddev_t *mddev);
+void md_integrity_add_rdev(mdk_rdev_t *rdev, mddev_t *mddev);
#endif /* _MD_MD_H */
set_bit(In_sync, &rdev->flags);
rcu_assign_pointer(p->rdev, rdev);
err = 0;
+ md_integrity_add_rdev(rdev, mddev);
break;
}
/* lost the race, try later */
err = -EBUSY;
p->rdev = rdev;
+ goto abort;
}
+ md_integrity_register(mddev);
}
abort:
mddev->queue->unplug_fn = multipath_unplug;
mddev->queue->backing_dev_info.congested_fn = multipath_congested;
mddev->queue->backing_dev_info.congested_data = mddev;
-
+ md_integrity_register(mddev);
return 0;
out_free_conf:
blk_queue_merge_bvec(mddev->queue, raid0_mergeable_bvec);
dump_zones(mddev);
+ md_integrity_register(mddev);
return 0;
}
rcu_assign_pointer(p->rdev, rdev);
break;
}
-
+ md_integrity_add_rdev(rdev, mddev);
print_conf(conf);
return err;
}
/* lost the race, try later */
err = -EBUSY;
p->rdev = rdev;
+ goto abort;
}
+ md_integrity_register(mddev);
}
abort:
mddev->queue->unplug_fn = raid1_unplug;
mddev->queue->backing_dev_info.congested_fn = raid1_congested;
mddev->queue->backing_dev_info.congested_data = mddev;
-
+ md_integrity_register(mddev);
return 0;
out_no_mem:
return -EINVAL;
set_capacity(mddev->gendisk, mddev->array_sectors);
mddev->changed = 1;
+ revalidate_disk(mddev->gendisk);
if (sectors > mddev->dev_sectors &&
mddev->recovery_cp == MaxSector) {
mddev->recovery_cp = mddev->dev_sectors;
break;
}
+ md_integrity_add_rdev(rdev, mddev);
print_conf(conf);
return err;
}
/* lost the race, try later */
err = -EBUSY;
p->rdev = rdev;
+ goto abort;
}
+ md_integrity_register(mddev);
}
abort:
if (conf->near_copies < mddev->raid_disks)
blk_queue_merge_bvec(mddev->queue, raid10_mergeable_bvec);
+ md_integrity_register(mddev);
return 0;
out_free_conf:
conf->reshape_progress < raid5_size(mddev, 0, 0)) {
sector_nr = raid5_size(mddev, 0, 0)
- conf->reshape_progress;
- } else if (mddev->delta_disks > 0 &&
+ } else if (mddev->delta_disks >= 0 &&
conf->reshape_progress > 0)
sector_nr = conf->reshape_progress;
sector_div(sector_nr, new_data_disks);
return 0;
}
+ /* Allow raid5_quiesce to complete */
+ wait_event(conf->wait_for_overlap, conf->quiesce != 2);
+
if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery))
return reshape_request(mddev, sector_nr, skipped);
return sectors * (raid_disks - conf->max_degraded);
}
+static void free_conf(raid5_conf_t *conf)
+{
+ shrink_stripes(conf);
+ safe_put_page(conf->spare_page);
+ kfree(conf->disks);
+ kfree(conf->stripe_hashtbl);
+ kfree(conf);
+}
+
static raid5_conf_t *setup_conf(mddev_t *mddev)
{
raid5_conf_t *conf;
abort:
if (conf) {
- shrink_stripes(conf);
- safe_put_page(conf->spare_page);
- kfree(conf->disks);
- kfree(conf->stripe_hashtbl);
- kfree(conf);
+ free_conf(conf);
return ERR_PTR(-EIO);
} else
return ERR_PTR(-ENOMEM);
(old_disks-max_degraded));
/* here_old is the first stripe that we might need to read
* from */
- if (here_new >= here_old) {
+ if (mddev->delta_disks == 0) {
+ /* We cannot be sure it is safe to start an in-place
+ * reshape. It is only safe if user-space if monitoring
+ * and taking constant backups.
+ * mdadm always starts a situation like this in
+ * readonly mode so it can take control before
+ * allowing any writes. So just check for that.
+ */
+ if ((here_new * mddev->new_chunk_sectors !=
+ here_old * mddev->chunk_sectors) ||
+ mddev->ro == 0) {
+ printk(KERN_ERR "raid5: in-place reshape must be started"
+ " in read-only mode - aborting\n");
+ return -EINVAL;
+ }
+ } else if (mddev->delta_disks < 0
+ ? (here_new * mddev->new_chunk_sectors <=
+ here_old * mddev->chunk_sectors)
+ : (here_new * mddev->new_chunk_sectors >=
+ here_old * mddev->chunk_sectors)) {
/* Reading from the same stripe as writing to - bad */
printk(KERN_ERR "raid5: reshape_position too early for "
"auto-recovery - aborting.\n");
md_unregister_thread(mddev->thread);
mddev->thread = NULL;
if (conf) {
- shrink_stripes(conf);
print_raid5_conf(conf);
- safe_put_page(conf->spare_page);
- kfree(conf->disks);
- kfree(conf->stripe_hashtbl);
- kfree(conf);
+ free_conf(conf);
}
mddev->private = NULL;
printk(KERN_ALERT "raid5: failed to run raid set %s\n", mdname(mddev));
md_unregister_thread(mddev->thread);
mddev->thread = NULL;
- shrink_stripes(conf);
- kfree(conf->stripe_hashtbl);
mddev->queue->backing_dev_info.congested_fn = NULL;
blk_sync_queue(mddev->queue); /* the unplug fn references 'conf'*/
sysfs_remove_group(&mddev->kobj, &raid5_attrs_group);
- kfree(conf->disks);
- kfree(conf);
+ free_conf(conf);
mddev->private = NULL;
return 0;
}
return -EINVAL;
set_capacity(mddev->gendisk, mddev->array_sectors);
mddev->changed = 1;
+ revalidate_disk(mddev->gendisk);
if (sectors > mddev->dev_sectors && mddev->recovery_cp == MaxSector) {
mddev->recovery_cp = mddev->dev_sectors;
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
spin_unlock_irqrestore(&conf->device_lock, flags);
}
mddev->raid_disks = conf->raid_disks;
- mddev->reshape_position = 0;
+ mddev->reshape_position = conf->reshape_progress;
set_bit(MD_CHANGE_DEVS, &mddev->flags);
clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
*/
static void raid5_finish_reshape(mddev_t *mddev)
{
- struct block_device *bdev;
raid5_conf_t *conf = mddev->private;
if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery)) {
md_set_array_sectors(mddev, raid5_size(mddev, 0, 0));
set_capacity(mddev->gendisk, mddev->array_sectors);
mddev->changed = 1;
-
- bdev = bdget_disk(mddev->gendisk, 0);
- if (bdev) {
- mutex_lock(&bdev->bd_inode->i_mutex);
- i_size_write(bdev->bd_inode,
- (loff_t)mddev->array_sectors << 9);
- mutex_unlock(&bdev->bd_inode->i_mutex);
- bdput(bdev);
- }
+ revalidate_disk(mddev->gendisk);
} else {
int d;
mddev->degraded = conf->raid_disks;
mddev->degraded--;
for (d = conf->raid_disks ;
d < conf->raid_disks - mddev->delta_disks;
- d++)
- raid5_remove_disk(mddev, d);
+ d++) {
+ mdk_rdev_t *rdev = conf->disks[d].rdev;
+ if (rdev && raid5_remove_disk(mddev, d) == 0) {
+ char nm[20];
+ sprintf(nm, "rd%d", rdev->raid_disk);
+ sysfs_remove_link(&mddev->kobj, nm);
+ rdev->raid_disk = -1;
+ }
+ }
}
mddev->layout = conf->algorithm;
mddev->chunk_sectors = conf->chunk_sectors;
case 1: /* stop all writes */
spin_lock_irq(&conf->device_lock);
- conf->quiesce = 1;
+ /* '2' tells resync/reshape to pause so that all
+ * active stripes can drain
+ */
+ conf->quiesce = 2;
wait_event_lock_irq(conf->wait_for_stripe,
atomic_read(&conf->active_stripes) == 0 &&
atomic_read(&conf->active_aligned_reads) == 0,
conf->device_lock, /* nothing */);
+ conf->quiesce = 1;
spin_unlock_irq(&conf->device_lock);
+ /* allow reshape to continue */
+ wake_up(&conf->wait_for_overlap);
break;
case 0: /* re-enable writes */
/* dump all registers */
static void qt1010_dump_regs(struct qt1010_priv *priv)
{
- char buf[52], buf2[4];
u8 reg, val;
for (reg = 0; ; reg++) {
if (reg % 16 == 0) {
if (reg)
- printk("%s\n", buf);
- sprintf(buf, "%02x: ", reg);
+ printk(KERN_CONT "\n");
+ printk(KERN_DEBUG "%02x:", reg);
}
if (qt1010_readreg(priv, reg, &val) == 0)
- sprintf(buf2, "%02x ", val);
+ printk(KERN_CONT " %02x", val);
else
- strcpy(buf2, "-- ");
- strcat(buf, buf2);
+ printk(KERN_CONT " --");
if (reg == 0x2f)
break;
}
- printk("%s\n", buf);
+ printk(KERN_CONT "\n");
}
static int qt1010_set_params(struct dvb_frontend *fe,
struct xc2028_data *priv = fe->tuner_priv;
int rc = 0;
- /* Avoid firmware reload on slow devices */
- if (no_poweroff)
+ /* Avoid firmware reload on slow devices or if PM disabled */
+ if (no_poweroff || priv->ctrl.disable_power_mgmt)
return 0;
tuner_dbg("Putting xc2028/3028 into poweroff mode.\n");
unsigned int input1:1;
unsigned int vhfbw7:1;
unsigned int uhfbw8:1;
+ unsigned int disable_power_mgmt:1;
unsigned int demod;
enum firmware_type type:2;
};
#include "tuner-simple.h"
#include "stv0297.h"
+
+/* Can we use the specified front-end? Remember that if we are compiled
+ * into the kernel we can't call code that's in modules. */
+#define FE_SUPPORTED(fe) (defined(CONFIG_DVB_##fe) || \
+ (defined(CONFIG_DVB_##fe##_MODULE) && defined(MODULE)))
+
/* lnb control */
-#if defined(CONFIG_DVB_MT312_MODULE) || defined(CONFIG_DVB_STV0299_MODULE)
+#if FE_SUPPORTED(MT312) || FE_SUPPORTED(STV0299)
static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
{
struct flexcop_device *fc = fe->dvb->priv;
}
#endif
-#if defined(CONFIG_DVB_S5H1420_MODULE) || defined(CONFIG_DVB_STV0299_MODULE) \
- || defined(CONFIG_DVB_MT312_MODULE)
+#if FE_SUPPORTED(S5H1420) || FE_SUPPORTED(STV0299) || FE_SUPPORTED(MT312)
static int flexcop_sleep(struct dvb_frontend* fe)
{
struct flexcop_device *fc = fe->dvb->priv;
#endif
/* SkyStar2 DVB-S rev 2.3 */
-#if defined(CONFIG_DVB_MT312_MODULE)
+#if FE_SUPPORTED(MT312)
static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
{
/* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */
}
return 0;
}
+#else
+#define skystar2_rev23_attach NULL
#endif
/* SkyStar2 DVB-S rev 2.6 */
-#if defined(CONFIG_DVB_STV0299_MODULE)
+#if FE_SUPPORTED(STV0299)
static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend *fe,
u32 srate, u32 ratio)
{
}
return 0;
}
+#else
+#define skystar2_rev26_attach NULL
#endif
/* SkyStar2 DVB-S rev 2.7 */
-#if defined(CONFIG_DVB_S5H1420_MODULE)
+#if FE_SUPPORTED(S5H1420) && FE_SUPPORTED(ISL6421) && FE_SUPPORTED(TUNER_ITD1000)
static struct s5h1420_config skystar2_rev2_7_s5h1420_config = {
.demod_address = 0x53,
.invert = 1,
fc->fc_i2c_adap[0].no_base_addr = 0;
return 0;
}
+#else
+#define skystar2_rev27_attach NULL
#endif
/* SkyStar2 rev 2.8 */
-#if defined(CONFIG_DVB_CX24123_MODULE)
+#if FE_SUPPORTED(CX24123) && FE_SUPPORTED(ISL6421) && FE_SUPPORTED(TUNER_CX24113)
static struct cx24123_config skystar2_rev2_8_cx24123_config = {
.demod_address = 0x55,
.dont_use_pll = 1,
* IR-receiver (PIC16F818) - but the card has no input for that ??? */
return 1;
}
+#else
+#define skystar2_rev28_attach NULL
#endif
/* AirStar DVB-T */
-#if defined(CONFIG_DVB_MT352_MODULE)
+#if FE_SUPPORTED(MT352)
static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend *fe)
{
static u8 mt352_clock_config[] = { 0x89, 0x18, 0x2d };
}
return 0;
}
+#else
+#define airstar_dvbt_attach NULL
#endif
/* AirStar ATSC 1st generation */
-#if defined(CONFIG_DVB_BCM3510_MODULE)
+#if FE_SUPPORTED(BCM3510)
static int flexcop_fe_request_firmware(struct dvb_frontend *fe,
const struct firmware **fw, char* name)
{
fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, i2c);
return fc->fe != NULL;
}
+#else
+#define airstar_atsc1_attach NULL
#endif
/* AirStar ATSC 2nd generation */
-#if defined(CONFIG_DVB_NXT200X_MODULE)
+#if FE_SUPPORTED(NXT200X) && FE_SUPPORTED(PLL)
static struct nxt200x_config samsung_tbmv_config = {
.demod_address = 0x0a,
};
return !!dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL,
DVB_PLL_SAMSUNG_TBMV);
}
+#else
+#define airstar_atsc2_attach NULL
#endif
/* AirStar ATSC 3rd generation */
-#if defined(CONFIG_DVB_LGDT330X_MODULE)
+#if FE_SUPPORTED(LGDT330X)
static struct lgdt330x_config air2pc_atsc_hd5000_config = {
.demod_address = 0x59,
.demod_chip = LGDT3303,
return !!dvb_attach(simple_tuner_attach, fc->fe, i2c, 0x61,
TUNER_LG_TDVS_H06XF);
}
+#else
+#define airstar_atsc3_attach NULL
#endif
/* CableStar2 DVB-C */
-#if defined(CONFIG_DVB_STV0297_MODULE)
+#if FE_SUPPORTED(STV0297)
static int alps_tdee4_stv0297_tuner_set_params(struct dvb_frontend* fe,
struct dvb_frontend_parameters *fep)
{
fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params;
return 1;
}
+#else
+#define cablestar2_attach NULL
#endif
static struct {
flexcop_device_type_t type;
int (*attach)(struct flexcop_device *, struct i2c_adapter *);
} flexcop_frontends[] = {
-#if defined(CONFIG_DVB_S5H1420_MODULE)
{ FC_SKY_REV27, skystar2_rev27_attach },
-#endif
-#if defined(CONFIG_DVB_CX24123_MODULE)
{ FC_SKY_REV28, skystar2_rev28_attach },
-#endif
-#if defined(CONFIG_DVB_STV0299_MODULE)
{ FC_SKY_REV26, skystar2_rev26_attach },
-#endif
-#if defined(CONFIG_DVB_MT352_MODULE)
{ FC_AIR_DVBT, airstar_dvbt_attach },
-#endif
-#if defined(CONFIG_DVB_NXT200X_MODULE)
{ FC_AIR_ATSC2, airstar_atsc2_attach },
-#endif
-#if defined(CONFIG_DVB_LGDT330X_MODULE)
{ FC_AIR_ATSC3, airstar_atsc3_attach },
-#endif
-#if defined(CONFIG_DVB_BCM3510_MODULE)
{ FC_AIR_ATSC1, airstar_atsc1_attach },
-#endif
-#if defined(CONFIG_DVB_STV0297_MODULE)
{ FC_CABLE, cablestar2_attach },
-#endif
-#if defined(CONFIG_DVB_MT312_MODULE)
{ FC_SKY_REV23, skystar2_rev23_attach },
-#endif
};
/* try to figure out the frontend */
{
int i;
for (i = 0; i < ARRAY_SIZE(flexcop_frontends); i++) {
+ if (!flexcop_frontends[i].attach)
+ continue;
/* type needs to be set before, because of some workarounds
* done based on the probed card type */
fc->dev_type = flexcop_frontends[i].type;
switch (req->cmd) {
case GET_CONFIG:
- case BOOT:
case READ_MEMORY:
case RECONNECT_USB:
case GET_IR_CODE:
case WRITE_VIRTUAL_MEMORY:
case COPY_FIRMWARE:
case DOWNLOAD_FIRMWARE:
+ case BOOT:
break;
default:
err("unknown command:%d", req->cmd);
u8 i, buf[3] = {0, 0, 0};
*auto_mode = 0; /* set if parameters are requested to auto set */
+ /* Try auto-detect transmission parameters in case of AUTO requested or
+ garbage parameters given by application for compatibility.
+ MPlayer seems to provide garbage parameters currently. */
+
switch (params->transmission_mode) {
case TRANSMISSION_MODE_AUTO:
*auto_mode = 1;
buf[0] |= (1 << 0);
break;
default:
- return -EINVAL;
+ deb_info("%s: invalid transmission_mode\n", __func__);
+ *auto_mode = 1;
}
switch (params->guard_interval) {
buf[0] |= (3 << 2);
break;
default:
- return -EINVAL;
+ deb_info("%s: invalid guard_interval\n", __func__);
+ *auto_mode = 1;
}
switch (params->hierarchy_information) {
buf[0] |= (3 << 4);
break;
default:
- return -EINVAL;
+ deb_info("%s: invalid hierarchy_information\n", __func__);
+ *auto_mode = 1;
};
switch (params->constellation) {
buf[1] |= (2 << 6);
break;
default:
- return -EINVAL;
+ deb_info("%s: invalid constellation\n", __func__);
+ *auto_mode = 1;
}
/* Use HP. How and which case we can switch to LP? */
buf[2] |= (4 << 0);
break;
default:
- return -EINVAL;
+ deb_info("%s: invalid code_rate_HP\n", __func__);
+ *auto_mode = 1;
}
switch (params->code_rate_LP) {
if (params->hierarchy_information == HIERARCHY_AUTO)
break;
default:
- return -EINVAL;
+ deb_info("%s: invalid code_rate_LP\n", __func__);
+ *auto_mode = 1;
}
switch (params->bandwidth) {
buf[1] |= (2 << 2);
break;
default:
- return -EINVAL;
+ deb_info("%s: invalid bandwidth\n", __func__);
+ buf[1] |= (2 << 2); /* cannot auto-detect BW, try 8 MHz */
}
/* program */
struct cx22700_state* state = NULL;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct cx22700_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct cx22700_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
struct cx22702_state *state = NULL;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct cx22702_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct cx22702_state), GFP_KERNEL);
if (state == NULL)
goto error;
int ret;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct cx24110_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct cx24110_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
struct dvb_dummy_fe_state* state = NULL;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
if (state == NULL) goto error;
/* create dvb_frontend */
struct dvb_dummy_fe_state* state = NULL;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
if (state == NULL) goto error;
/* create dvb_frontend */
struct dvb_dummy_fe_state* state = NULL;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL);
if (state == NULL) goto error;
/* create dvb_frontend */
{ .addr = config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } };
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct l64781_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct l64781_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
dprintk("%s\n", __func__);
/* Allocate memory for the internal state */
- state = kmalloc(sizeof(struct lgs8gl5_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct lgs8gl5_state), GFP_KERNEL);
if (state == NULL)
goto error;
struct mt312_state *state = NULL;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct mt312_state), GFP_KERNEL);
if (state == NULL)
goto error;
struct nxt6000_state* state = NULL;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct nxt6000_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct nxt6000_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
struct or51132_state* state = NULL;
/* Allocate memory for the internal state */
- state = kmalloc(sizeof(struct or51132_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct or51132_state), GFP_KERNEL);
if (state == NULL)
return NULL;
struct or51211_state* state = NULL;
/* Allocate memory for the internal state */
- state = kmalloc(sizeof(struct or51211_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct or51211_state), GFP_KERNEL);
if (state == NULL)
return NULL;
u16 reg;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct s5h1409_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct s5h1409_state), GFP_KERNEL);
if (state == NULL)
goto error;
u16 reg;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct s5h1411_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct s5h1411_state), GFP_KERNEL);
if (state == NULL)
goto error;
dprintk("%s\n", __func__);
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct si21xx_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct si21xx_state), GFP_KERNEL);
if (state == NULL)
goto error;
struct sp8870_state* state = NULL;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct sp8870_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct sp8870_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
struct sp887x_state* state = NULL;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct sp887x_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct sp887x_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
int id;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct stv0288_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct stv0288_state), GFP_KERNEL);
if (state == NULL)
goto error;
struct stv0297_state *state = NULL;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct stv0297_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct stv0297_state), GFP_KERNEL);
if (state == NULL)
goto error;
int id;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct stv0299_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct stv0299_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
u8 id;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct tda10021_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct tda10021_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
dprintk(1, "%s()\n", __func__);
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct tda10048_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct tda10048_state), GFP_KERNEL);
if (state == NULL)
goto error;
int id;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
if (!state) {
printk(KERN_ERR "Can't alocate memory for tda10045 state\n");
return NULL;
int id;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
if (!state) {
printk(KERN_ERR "Can't alocate memory for tda10046 state\n");
return NULL;
dprintk ("%s\n", __func__);
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct tda10086_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct tda10086_state), GFP_KERNEL);
if (!state)
return NULL;
struct tda8083_state* state = NULL;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct tda8083_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct tda8083_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
struct ves1820_state* state = NULL;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct ves1820_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct ves1820_state), GFP_KERNEL);
if (state == NULL)
goto error;
u8 identity;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct ves1x93_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct ves1x93_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
static void zl10353_dump_regs(struct dvb_frontend *fe)
{
struct zl10353_state *state = fe->demodulator_priv;
- char buf[52], buf2[4];
int ret;
u8 reg;
for (reg = 0; ; reg++) {
if (reg % 16 == 0) {
if (reg)
- printk(KERN_DEBUG "%s\n", buf);
- sprintf(buf, "%02x: ", reg);
+ printk(KERN_CONT "\n");
+ printk(KERN_DEBUG "%02x:", reg);
}
ret = zl10353_read_register(state, reg);
if (ret >= 0)
- sprintf(buf2, "%02x ", (u8)ret);
+ printk(KERN_CONT " %02x", (u8)ret);
else
- strcpy(buf2, "-- ");
- strcat(buf, buf2);
+ printk(KERN_CONT " --");
if (reg == 0xff)
break;
}
- printk(KERN_DEBUG "%s\n", buf);
+ printk(KERN_CONT "\n");
}
static void zl10353_calc_nominal_rate(struct dvb_frontend *fe,
# Siano Mobile Silicon Digital TV device configuration
#
-config DVB_SIANO_SMS1XXX
- tristate "Siano SMS1XXX USB dongle support"
- depends on DVB_CORE && USB
+config SMS_SIANO_MDTV
+ tristate "Siano SMS1xxx based MDTV receiver"
+ depends on DVB_CORE && INPUT
---help---
- Choose Y here if you have a USB dongle with a SMS1XXX chipset.
+ Choose Y or M here if you have MDTV receiver with a Siano chipset.
- To compile this driver as a module, choose M here: the
- module will be called sms1xxx.
+ To compile this driver as a module, choose M here
+ (The module will be called smsmdtv).
-config DVB_SIANO_SMS1XXX_SMS_IDS
- bool "Enable support for Siano Mobile Silicon default USB IDs"
- depends on DVB_SIANO_SMS1XXX
- default y
- ---help---
- Choose Y here if you have a USB dongle with a SMS1XXX chipset
- that uses Siano Mobile Silicon's default usb vid:pid.
+ Further documentation on this driver can be found on the WWW
+ at http://www.siano-ms.com/
+
+if SMS_SIANO_MDTV
+menu "Siano module components"
- Choose N here if you would prefer to use Siano's external driver.
+# Hardware interfaces support
- Further documentation on this driver can be found on the WWW at
- <http://www.siano-ms.com/>.
+config SMS_USB_DRV
+ tristate "USB interface support"
+ depends on DVB_CORE && USB
+ ---help---
+ Choose if you would like to have Siano's support for USB interface
+config SMS_SDIO_DRV
+ tristate "SDIO interface support"
+ depends on DVB_CORE && MMC
+ ---help---
+ Choose if you would like to have Siano's support for SDIO interface
+endmenu
+endif # SMS_SIANO_MDTV
-sms1xxx-objs := smscoreapi.o sms-cards.o smsendian.o smsir.o
-obj-$(CONFIG_DVB_SIANO_SMS1XXX) += sms1xxx.o
-obj-$(CONFIG_DVB_SIANO_SMS1XXX) += smsusb.o
-obj-$(CONFIG_DVB_SIANO_SMS1XXX) += smsdvb.o
+smsmdtv-objs := smscoreapi.o sms-cards.o smsendian.o smsir.o
+
+obj-$(CONFIG_SMS_SIANO_MDTV) += smsmdtv.o smsdvb.o
+obj-$(CONFIG_SMS_USB_DRV) += smsusb.o
+obj-$(CONFIG_SMS_SDIO_DRV) += smssdio.o
EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
int sms_board_event(struct smscore_device_t *coredev,
enum SMS_BOARD_EVENTS gevent) {
- int board_id = smscore_get_board_id(coredev);
- struct sms_board *board = sms_get_board(board_id);
struct smscore_gpio_config MyGpioConfig;
sms_gpio_assign_11xx_default_led_config(&MyGpioConfig);
switch (gevent) {
case BOARD_EVENT_POWER_INIT: /* including hotplug */
- switch (board_id) {
- case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
- /* set I/O and turn off all LEDs */
- smscore_gpio_configure(coredev,
- board->board_cfg.leds_power,
- &MyGpioConfig);
- smscore_gpio_set_level(coredev,
- board->board_cfg.leds_power, 0);
- smscore_gpio_configure(coredev, board->board_cfg.led0,
- &MyGpioConfig);
- smscore_gpio_set_level(coredev,
- board->board_cfg.led0, 0);
- smscore_gpio_configure(coredev, board->board_cfg.led1,
- &MyGpioConfig);
- smscore_gpio_set_level(coredev,
- board->board_cfg.led1, 0);
- break;
- case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
- case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
- /* set I/O and turn off LNA */
- smscore_gpio_configure(coredev,
- board->board_cfg.foreign_lna0_ctrl,
- &MyGpioConfig);
- smscore_gpio_set_level(coredev,
- board->board_cfg.foreign_lna0_ctrl,
- 0);
- break;
- }
break; /* BOARD_EVENT_BIND */
case BOARD_EVENT_POWER_SUSPEND:
- switch (board_id) {
- case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
- smscore_gpio_set_level(coredev,
- board->board_cfg.leds_power, 0);
- smscore_gpio_set_level(coredev,
- board->board_cfg.led0, 0);
- smscore_gpio_set_level(coredev,
- board->board_cfg.led1, 0);
- break;
- case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
- case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
- smscore_gpio_set_level(coredev,
- board->board_cfg.foreign_lna0_ctrl,
- 0);
- break;
- }
break; /* BOARD_EVENT_POWER_SUSPEND */
case BOARD_EVENT_POWER_RESUME:
- switch (board_id) {
- case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
- smscore_gpio_set_level(coredev,
- board->board_cfg.leds_power, 1);
- smscore_gpio_set_level(coredev,
- board->board_cfg.led0, 1);
- smscore_gpio_set_level(coredev,
- board->board_cfg.led1, 0);
- break;
- case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
- case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
- smscore_gpio_set_level(coredev,
- board->board_cfg.foreign_lna0_ctrl,
- 1);
- break;
- }
break; /* BOARD_EVENT_POWER_RESUME */
case BOARD_EVENT_BIND:
- switch (board_id) {
- case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
- smscore_gpio_set_level(coredev,
- board->board_cfg.leds_power, 1);
- smscore_gpio_set_level(coredev,
- board->board_cfg.led0, 1);
- smscore_gpio_set_level(coredev,
- board->board_cfg.led1, 0);
- break;
- case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
- case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
- smscore_gpio_set_level(coredev,
- board->board_cfg.foreign_lna0_ctrl,
- 1);
- break;
- }
break; /* BOARD_EVENT_BIND */
case BOARD_EVENT_SCAN_PROG:
case BOARD_EVENT_EMERGENCY_WARNING_SIGNAL:
break; /* BOARD_EVENT_EMERGENCY_WARNING_SIGNAL */
case BOARD_EVENT_FE_LOCK:
- switch (board_id) {
- case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
- smscore_gpio_set_level(coredev,
- board->board_cfg.led1, 1);
- break;
- }
break; /* BOARD_EVENT_FE_LOCK */
case BOARD_EVENT_FE_UNLOCK:
- switch (board_id) {
- case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
- smscore_gpio_set_level(coredev,
- board->board_cfg.led1, 0);
- break;
- }
break; /* BOARD_EVENT_FE_UNLOCK */
case BOARD_EVENT_DEMOD_LOCK:
break; /* BOARD_EVENT_DEMOD_LOCK */
case BOARD_EVENT_RECEPTION_LOST_0:
break; /* BOARD_EVENT_RECEPTION_LOST_0 */
case BOARD_EVENT_MULTIPLEX_OK:
- switch (board_id) {
- case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
- smscore_gpio_set_level(coredev,
- board->board_cfg.led1, 1);
- break;
- }
break; /* BOARD_EVENT_MULTIPLEX_OK */
case BOARD_EVENT_MULTIPLEX_ERRORS:
- switch (board_id) {
- case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
- smscore_gpio_set_level(coredev,
- board->board_cfg.led1, 0);
- break;
- }
break; /* BOARD_EVENT_MULTIPLEX_ERRORS */
default:
sms_debug("set device mode to %d", mode);
if (coredev->device_flags & SMS_DEVICE_FAMILY2) {
- if (mode < DEVICE_MODE_DVBT || mode > DEVICE_MODE_RAW_TUNER) {
+ if (mode < DEVICE_MODE_DVBT || mode >= DEVICE_MODE_RAW_TUNER) {
sms_err("invalid mode specified %d", mode);
return -EINVAL;
}
0 : -ETIME;
}
+static inline int led_feedback(struct smsdvb_client_t *client)
+{
+ if (client->fe_status & FE_HAS_LOCK)
+ return sms_board_led_feedback(client->coredev,
+ (client->sms_stat_dvb.ReceptionData.BER
+ == 0) ? SMS_LED_HI : SMS_LED_LO);
+ else
+ return sms_board_led_feedback(client->coredev, SMS_LED_OFF);
+}
+
static int smsdvb_read_status(struct dvb_frontend *fe, fe_status_t *stat)
{
struct smsdvb_client_t *client;
*stat = client->fe_status;
+ led_feedback(client);
+
return 0;
}
*ber = client->sms_stat_dvb.ReceptionData.BER;
+ led_feedback(client);
+
return 0;
}
(client->sms_stat_dvb.ReceptionData.InBandPwr
+ 95) * 3 / 2;
+ led_feedback(client);
+
return 0;
}
*snr = client->sms_stat_dvb.ReceptionData.SNR;
+ led_feedback(client);
+
return 0;
}
*ucblocks = client->sms_stat_dvb.ReceptionData.ErrorTSPackets;
+ led_feedback(client);
+
return 0;
}
u32 Data[3];
} Msg;
+ int ret;
+
client->fe_status = FE_HAS_SIGNAL;
client->event_fe_state = -1;
client->event_unc_state = -1;
case BANDWIDTH_AUTO: return -EOPNOTSUPP;
default: return -EINVAL;
}
+ /* Disable LNA, if any. An error is returned if no LNA is present */
+ ret = sms_board_lna_control(client->coredev, 0);
+ if (ret == 0) {
+ fe_status_t status;
+
+ /* tune with LNA off at first */
+ ret = smsdvb_sendrequest_and_wait(client, &Msg, sizeof(Msg),
+ &client->tune_done);
+
+ smsdvb_read_status(fe, &status);
+
+ if (status & FE_HAS_LOCK)
+ return ret;
+
+ /* previous tune didnt lock - enable LNA and tune again */
+ sms_board_lna_control(client->coredev, 1);
+ }
return smsdvb_sendrequest_and_wait(client, &Msg, sizeof(Msg),
&client->tune_done);
struct smsdvb_client_t *client =
container_of(fe, struct smsdvb_client_t, frontend);
+ sms_board_power(client->coredev, 1);
+
sms_board_dvb3_event(client, DVB3_EVENT_INIT);
return 0;
}
struct smsdvb_client_t *client =
container_of(fe, struct smsdvb_client_t, frontend);
+ sms_board_led_feedback(client->coredev, SMS_LED_OFF);
+ sms_board_power(client->coredev, 0);
+
sms_board_dvb3_event(client, DVB3_EVENT_SLEEP);
return 0;
#define SMSSDIO_DATA 0x00
#define SMSSDIO_INT 0x04
+#define SMSSDIO_BLOCK_SIZE 128
static const struct sdio_device_id smssdio_ids[] = {
{SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_STELLAR),
sdio_claim_host(smsdev->func);
while (size >= smsdev->func->cur_blksize) {
- ret = sdio_write_blocks(smsdev->func, SMSSDIO_DATA, buffer, 1);
+ ret = sdio_memcpy_toio(smsdev->func, SMSSDIO_DATA,
+ buffer, smsdev->func->cur_blksize);
if (ret)
goto out;
}
if (size) {
- ret = sdio_write_bytes(smsdev->func, SMSSDIO_DATA,
- buffer, size);
+ ret = sdio_memcpy_toio(smsdev->func, SMSSDIO_DATA,
+ buffer, size);
}
out:
*/
isr = sdio_readb(func, SMSSDIO_INT, &ret);
if (ret) {
- dev_err(&smsdev->func->dev,
- "Unable to read interrupt register!\n");
+ sms_err("Unable to read interrupt register!\n");
return;
}
if (smsdev->split_cb == NULL) {
cb = smscore_getbuffer(smsdev->coredev);
if (!cb) {
- dev_err(&smsdev->func->dev,
- "Unable to allocate data buffer!\n");
+ sms_err("Unable to allocate data buffer!\n");
return;
}
- ret = sdio_read_blocks(smsdev->func, cb->p, SMSSDIO_DATA, 1);
+ ret = sdio_memcpy_fromio(smsdev->func,
+ cb->p,
+ SMSSDIO_DATA,
+ SMSSDIO_BLOCK_SIZE);
if (ret) {
- dev_err(&smsdev->func->dev,
- "Error %d reading initial block!\n", ret);
+ sms_err("Error %d reading initial block!\n", ret);
return;
}
return;
}
- size = hdr->msgLength - smsdev->func->cur_blksize;
+ if (hdr->msgLength > smsdev->func->cur_blksize)
+ size = hdr->msgLength - smsdev->func->cur_blksize;
+ else
+ size = 0;
} else {
cb = smsdev->split_cb;
hdr = cb->p;
smsdev->split_cb = NULL;
}
- if (hdr->msgLength > smsdev->func->cur_blksize) {
+ if (size) {
void *buffer;
- size = ALIGN(size, 128);
- buffer = cb->p + hdr->msgLength;
+ buffer = cb->p + (hdr->msgLength - size);
+ size = ALIGN(size, SMSSDIO_BLOCK_SIZE);
- BUG_ON(smsdev->func->cur_blksize != 128);
+ BUG_ON(smsdev->func->cur_blksize != SMSSDIO_BLOCK_SIZE);
/*
* First attempt to transfer all of it in one go...
*/
- ret = sdio_read_blocks(smsdev->func, buffer,
- SMSSDIO_DATA, size / 128);
+ ret = sdio_memcpy_fromio(smsdev->func,
+ buffer,
+ SMSSDIO_DATA,
+ size);
if (ret && ret != -EINVAL) {
smscore_putbuffer(smsdev->coredev, cb);
- dev_err(&smsdev->func->dev,
- "Error %d reading data from card!\n", ret);
+ sms_err("Error %d reading data from card!\n", ret);
return;
}
*/
if (ret == -EINVAL) {
while (size) {
- ret = sdio_read_blocks(smsdev->func,
- buffer, SMSSDIO_DATA, 1);
+ ret = sdio_memcpy_fromio(smsdev->func,
+ buffer, SMSSDIO_DATA,
+ smsdev->func->cur_blksize);
if (ret) {
smscore_putbuffer(smsdev->coredev, cb);
- dev_err(&smsdev->func->dev,
- "Error %d reading "
+ sms_err("Error %d reading "
"data from card!\n", ret);
return;
}
if (ret)
goto release;
- ret = sdio_set_block_size(func, 128);
+ ret = sdio_set_block_size(func, SMSSDIO_BLOCK_SIZE);
if (ret)
goto disable;
config USB_ZR364XX
tristate "USB ZR364XX Camera support"
depends on VIDEO_V4L2
+ select VIDEOBUF_GEN
+ select VIDEOBUF_VMALLOC
---help---
Say Y here if you want to connect this type of camera to your
computer's USB port.
/* initialization part two -- after registering i2c bus */
void __devinit bttv_init_card2(struct bttv *btv)
{
- int addr=ADDR_UNSET;
-
btv->tuner_type = UNSET;
if (BTTV_BOARD_UNKNOWN == btv->c.type) {
btv->pll.pll_current = -1;
/* tuner configuration (from card list / autodetect / insmod option) */
- if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
- addr = bttv_tvcards[btv->c.type].tuner_addr;
-
if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
if (UNSET == btv->tuner_type)
btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
if (UNSET == btv->tuner_type)
btv->tuner_type = TUNER_ABSENT;
- if (btv->tuner_type != TUNER_ABSENT) {
- struct tuner_setup tun_setup;
-
- /* Load tuner module before issuing tuner config call! */
- if (bttv_tvcards[btv->c.type].has_radio)
- v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, "tuner", "tuner",
- v4l2_i2c_tuner_addrs(ADDRS_RADIO));
- v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, "tuner", "tuner",
- v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
- v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, "tuner", "tuner",
- v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
-
- tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
- tun_setup.type = btv->tuner_type;
- tun_setup.addr = addr;
-
- if (bttv_tvcards[btv->c.type].has_radio)
- tun_setup.mode_mask |= T_RADIO;
-
- bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
- }
-
- if (btv->tda9887_conf) {
- struct v4l2_priv_tun_config tda9887_cfg;
-
- tda9887_cfg.tuner = TUNER_TDA9887;
- tda9887_cfg.priv = &btv->tda9887_conf;
-
- bttv_call_all(btv, tuner, s_config, &tda9887_cfg);
- }
-
btv->dig = bttv_tvcards[btv->c.type].has_dig_in ?
bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET;
btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ?
btv->has_remote = remote[btv->c.nr];
if (bttv_tvcards[btv->c.type].has_radio)
- btv->has_radio=1;
+ btv->has_radio = 1;
if (bttv_tvcards[btv->c.type].has_remote)
- btv->has_remote=1;
+ btv->has_remote = 1;
if (!bttv_tvcards[btv->c.type].no_gpioirq)
- btv->gpioirq=1;
+ btv->gpioirq = 1;
if (bttv_tvcards[btv->c.type].volume_gpio)
- btv->volume_gpio=bttv_tvcards[btv->c.type].volume_gpio;
+ btv->volume_gpio = bttv_tvcards[btv->c.type].volume_gpio;
if (bttv_tvcards[btv->c.type].audio_mode_gpio)
- btv->audio_mode_gpio=bttv_tvcards[btv->c.type].audio_mode_gpio;
+ btv->audio_mode_gpio = bttv_tvcards[btv->c.type].audio_mode_gpio;
if (btv->tuner_type == TUNER_ABSENT)
return; /* no tuner or related drivers to load */
}
+/* initialize the tuner */
+void __devinit bttv_init_tuner(struct bttv *btv)
+{
+ int addr = ADDR_UNSET;
+
+ if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
+ addr = bttv_tvcards[btv->c.type].tuner_addr;
+
+ if (btv->tuner_type != TUNER_ABSENT) {
+ struct tuner_setup tun_setup;
+
+ /* Load tuner module before issuing tuner config call! */
+ if (bttv_tvcards[btv->c.type].has_radio)
+ v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
+ &btv->c.i2c_adap, "tuner", "tuner",
+ v4l2_i2c_tuner_addrs(ADDRS_RADIO));
+ v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
+ &btv->c.i2c_adap, "tuner", "tuner",
+ v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
+ v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
+ &btv->c.i2c_adap, "tuner", "tuner",
+ v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
+
+ tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
+ tun_setup.type = btv->tuner_type;
+ tun_setup.addr = addr;
+
+ if (bttv_tvcards[btv->c.type].has_radio)
+ tun_setup.mode_mask |= T_RADIO;
+
+ bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
+ }
+
+ if (btv->tda9887_conf) {
+ struct v4l2_priv_tun_config tda9887_cfg;
+
+ tda9887_cfg.tuner = TUNER_TDA9887;
+ tda9887_cfg.priv = &btv->tda9887_conf;
+
+ bttv_call_all(btv, tuner, s_config, &tda9887_cfg);
+ }
+}
+
/* ----------------------------------------------------------------------- */
static void modtec_eeprom(struct bttv *btv)
/* some card-specific stuff (needs working i2c) */
bttv_init_card2(btv);
+ bttv_init_tuner(btv);
init_irqreg(btv);
/* register video4linux + input */
extern void bttv_idcard(struct bttv *btv);
extern void bttv_init_card1(struct bttv *btv);
extern void bttv_init_card2(struct bttv *btv);
+extern void bttv_init_tuner(struct bttv *btv);
/* card-specific funtions */
extern void tea5757_set_freq(struct bttv *btv, unsigned short freq);
if (parport[0] && strncmp(parport[0], "auto", 4) != 0) {
/* user gave parport parameters */
- for(n=0; parport[n] && n<MAX_CAMS; n++){
+ for (n = 0; n < MAX_CAMS && parport[n]; n++) {
char *ep;
unsigned long r;
r = simple_strtoul(parport[n], &ep, 0);
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
* 02111-1307 USA
*/
+#include <linux/kernel.h>
#include "cx18-driver.h"
#include "cx18-cards.h"
idx = p.audio_properties & 0x03;
/* The audio clock of the digitizer must match the codec sample
rate otherwise you get some very strange effects. */
- if (idx < sizeof(freqs))
+ if (idx < ARRAY_SIZE(freqs))
cx18_call_all(cx, audio, s_clock_freq, freqs[idx]);
return err;
}
#define dprintk(level, fmt, arg...)\
do { if (v4l_debug >= level) \
- printk(KERN_DEBUG "%s: " fmt, dev->name , ## arg);\
+ printk(KERN_DEBUG "%s: " fmt, \
+ (dev) ? dev->name : "cx23885[?]", ## arg); \
} while (0)
static struct cx23885_tvnorm cx23885_tvnorms[] = {
.read = mpeg_read,
.poll = mpeg_poll,
.mmap = mpeg_mmap,
+ .ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops mpeg_ioctl_ops = {
.fops = &mpeg_fops,
.ioctl_ops = &mpeg_ioctl_ops,
.minor = -1,
+ .tvnorms = CX23885_NORMS,
+ .current_norm = V4L2_STD_NTSC_M,
};
void cx23885_417_unregister(struct cx23885_dev *dev)
case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
ctl->demod = XC3028_FE_OREN538;
break;
+ case CX88_BOARD_GENIATECH_X8000_MT:
+ /* FIXME: For this board, the xc3028 never recovers after being
+ powered down (the reset GPIO probably is not set properly).
+ We don't have access to the hardware so we cannot determine
+ which GPIO is used for xc3028, so just disable power xc3028
+ power management for now */
+ ctl->disable_power_mgmt = 1;
+ break;
case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME:
case CX88_BOARD_PROLINK_PV_8000GT:
static struct zl10353_config cx88_geniatech_x8000_mt = {
.demod_address = (0x1e >> 1),
.no_tuner = 1,
+ .disable_i2c_gate_ctrl = 1,
};
static struct s5h1411_config dvico_fusionhdtv7_config = {
udelay(100);
break;
case CX88_BOARD_HAUPPAUGE_HVR1300:
+ /* Enable MPEG parallel IO and video signal pins */
+ cx_write(MO_PINMUX_IO, 0x88);
+ cx_write(TS_SOP_STAT, 0);
+ cx_write(TS_VALERR_CNTRL, 0);
break;
case CX88_BOARD_PINNACLE_PCTV_HD_800i:
/* Enable MPEG parallel IO and video signal pins */
module_param_array(card, int, NULL, 0444);
MODULE_PARM_DESC(card, "card type");
-#define MT9V011_VERSION 0x8243
-
/* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS */
static unsigned long em28xx_devused;
{ -1, -1, -1, -1},
};
+/* Pinnacle Hybrid Pro eb1a:2881 */
+static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = {
+ {EM28XX_R08_GPIO, 0xfd, ~EM_GPIO_4, 10},
+ { -1, -1, -1, -1},
+};
+
+static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = {
+ {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
+ {EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */
+ {EM2880_R04_GPO, 0x0c, 0xff, 1},
+ { -1, -1, -1, -1},
+};
+
+
/* Callback for the most boards */
static struct em28xx_reg_seq default_tuner_gpio[] = {
{EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
*/
struct em28xx_board em28xx_boards[] = {
[EM2750_BOARD_UNKNOWN] = {
- .name = "Unknown EM2750/EM2751 webcam grabber",
- .xclk = EM28XX_XCLK_FREQUENCY_48MHZ,
- .tuner_type = TUNER_ABSENT, /* This is a webcam */
+ .name = "EM2710/EM2750/EM2751 webcam grabber",
+ .xclk = EM28XX_XCLK_FREQUENCY_20MHZ,
+ .tuner_type = TUNER_ABSENT,
+ .is_webcam = 1,
.input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = 0,
.amux = EM28XX_AMUX_VIDEO,
+ .gpio = silvercrest_reg_seq,
} },
},
[EM2800_BOARD_UNKNOWN] = {
[EM2820_BOARD_UNKNOWN] = {
.name = "Unknown EM2750/28xx video grabber",
.tuner_type = TUNER_ABSENT,
+ .is_webcam = 1, /* To enable sensor probe */
},
[EM2750_BOARD_DLCW_130] = {
/* Beijing Huaqi Information Digital Technology Co., Ltd */
.name = "Huaqi DLCW-130",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.xclk = EM28XX_XCLK_FREQUENCY_48MHZ,
- .tuner_type = TUNER_ABSENT, /* This is a webcam */
+ .tuner_type = TUNER_ABSENT,
+ .is_webcam = 1,
.input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = 0,
[EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
.name = "Videology 20K14XUSB USB2.0",
.valid = EM28XX_BOARD_NOT_VALIDATED,
- .tuner_type = TUNER_ABSENT, /* This is a webcam */
+ .tuner_type = TUNER_ABSENT,
+ .is_webcam = 1,
.input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = 0,
[EM2820_BOARD_SILVERCREST_WEBCAM] = {
.name = "Silvercrest Webcam 1.3mpix",
.tuner_type = TUNER_ABSENT,
- .is_27xx = 1,
- .decoder = EM28XX_MT9V011,
+ .is_webcam = 1,
.input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = 0,
/* Beijing Huaqi Information Digital Technology Co., Ltd */
.name = "NetGMBH Cam",
.valid = EM28XX_BOARD_NOT_VALIDATED,
- .tuner_type = TUNER_ABSENT, /* This is a webcam */
+ .tuner_type = TUNER_ABSENT,
+ .is_webcam = 1,
.input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = 0,
},
[EM2861_BOARD_PLEXTOR_PX_TV100U] = {
.name = "Plextor ConvertX PX-TV100U",
- .valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_TNF_5335MF,
+ .xclk = EM28XX_XCLK_I2S_MSB_TIMING |
+ EM28XX_XCLK_FREQUENCY_12MHZ,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_TVP5150,
+ .has_msp34xx = 1,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
+ .gpio = pinnacle_hybrid_pro_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
+ .gpio = pinnacle_hybrid_pro_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
+ .gpio = pinnacle_hybrid_pro_analog,
} },
},
},
[EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
.name = "Pinnacle Hybrid Pro",
- .valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
+ .has_dvb = 1,
+ .dvb_gpio = pinnacle_hybrid_pro_digital,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
- .gpio = default_analog,
+ .gpio = pinnacle_hybrid_pro_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
- .gpio = default_analog,
+ .gpio = pinnacle_hybrid_pro_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
- .gpio = default_analog,
+ .gpio = pinnacle_hybrid_pro_analog,
} },
},
[EM2882_BOARD_PINNACLE_HYBRID_PRO] = {
.driver_info = EM2750_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2800),
.driver_info = EM2800_BOARD_UNKNOWN },
+ { USB_DEVICE(0xeb1a, 0x2710),
+ .driver_info = EM2820_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2820),
.driver_info = EM2820_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2821),
{0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
{0x9567eb1a, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028},
{0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028},
+ {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028},
};
/* I2C devicelist hash table for devices with generic USB IDs */
EM28XX_I2C_FREQ_100_KHZ;
}
+
+/* FIXME: Should be replaced by a proper mt9m111 driver */
+static int em28xx_initialize_mt9m111(struct em28xx *dev)
+{
+ int i;
+ unsigned char regs[][3] = {
+ { 0x0d, 0x00, 0x01, }, /* reset and use defaults */
+ { 0x0d, 0x00, 0x00, },
+ { 0x0a, 0x00, 0x21, },
+ { 0x21, 0x04, 0x00, }, /* full readout speed, no row/col skipping */
+ };
+
+ for (i = 0; i < ARRAY_SIZE(regs); i++)
+ i2c_master_send(&dev->i2c_client, ®s[i][0], 3);
+
+ return 0;
+}
+
+
+/* FIXME: Should be replaced by a proper mt9m001 driver */
+static int em28xx_initialize_mt9m001(struct em28xx *dev)
+{
+ int i;
+ unsigned char regs[][3] = {
+ { 0x0d, 0x00, 0x01, },
+ { 0x0d, 0x00, 0x00, },
+ { 0x04, 0x05, 0x00, }, /* hres = 1280 */
+ { 0x03, 0x04, 0x00, }, /* vres = 1024 */
+ { 0x20, 0x11, 0x00, },
+ { 0x06, 0x00, 0x10, },
+ { 0x2b, 0x00, 0x24, },
+ { 0x2e, 0x00, 0x24, },
+ { 0x35, 0x00, 0x24, },
+ { 0x2d, 0x00, 0x20, },
+ { 0x2c, 0x00, 0x20, },
+ { 0x09, 0x0a, 0xd4, },
+ { 0x35, 0x00, 0x57, },
+ };
+
+ for (i = 0; i < ARRAY_SIZE(regs); i++)
+ i2c_master_send(&dev->i2c_client, ®s[i][0], 3);
+
+ return 0;
+}
+
/* HINT method: webcam I2C chips
*
- * This method work for webcams with Micron sensors
+ * This method works for webcams with Micron sensors
*/
static int em28xx_hint_sensor(struct em28xx *dev)
{
__be16 version_be;
u16 version;
- if (dev->model != EM2820_BOARD_UNKNOWN)
- return 0;
-
+ /* Micron sensor detection */
dev->i2c_client.addr = 0xba >> 1;
cmd = 0;
i2c_master_send(&dev->i2c_client, &cmd, 1);
return -EINVAL;
version = be16_to_cpu(version_be);
-
switch (version) {
- case MT9V011_VERSION:
+ case 0x8232: /* mt9v011 640x480 1.3 Mpix sensor */
+ case 0x8243: /* mt9v011 rev B 640x480 1.3 Mpix sensor */
dev->model = EM2820_BOARD_SILVERCREST_WEBCAM;
+ em28xx_set_model(dev);
+
sensor_name = "mt9v011";
+ dev->em28xx_sensor = EM28XX_MT9V011;
+ dev->sensor_xres = 640;
+ dev->sensor_yres = 480;
+ /*
+ * FIXME: mt9v011 uses I2S speed as xtal clk - at least with
+ * the Silvercrest cam I have here for testing - for higher
+ * resolutions, a high clock cause horizontal artifacts, so we
+ * need to use a lower xclk frequency.
+ * Yet, it would be possible to adjust xclk depending on the
+ * desired resolution, since this affects directly the
+ * frame rate.
+ */
+ dev->board.xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ;
+ dev->sensor_xtal = 4300000;
+
+ /* probably means GRGB 16 bit bayer */
+ dev->vinmode = 0x0d;
+ dev->vinctl = 0x00;
+
+ break;
+
+ case 0x143a: /* MT9M111 as found in the ECS G200 */
+ dev->model = EM2750_BOARD_UNKNOWN;
+ em28xx_set_model(dev);
+
+ sensor_name = "mt9m111";
+ dev->board.xclk = EM28XX_XCLK_FREQUENCY_48MHZ;
+ dev->em28xx_sensor = EM28XX_MT9M111;
+ em28xx_initialize_mt9m111(dev);
+ dev->sensor_xres = 640;
+ dev->sensor_yres = 512;
+
+ dev->vinmode = 0x0a;
+ dev->vinctl = 0x00;
+
+ break;
+
+ case 0x8431:
+ dev->model = EM2750_BOARD_UNKNOWN;
+ em28xx_set_model(dev);
+
+ sensor_name = "mt9m001";
+ dev->em28xx_sensor = EM28XX_MT9M001;
+ em28xx_initialize_mt9m001(dev);
+ dev->sensor_xres = 1280;
+ dev->sensor_yres = 1024;
+
+ /* probably means BGGR 16 bit bayer */
+ dev->vinmode = 0x0c;
+ dev->vinctl = 0x00;
+
break;
default:
- printk("Unknown Sensor 0x%04x\n", be16_to_cpu(version));
+ printk("Unknown Micron Sensor 0x%04x\n", version);
return -EINVAL;
}
- em28xx_errdev("Sensor is %s, assuming that webcam is %s\n",
+ /* Setup webcam defaults */
+ em28xx_pre_card_setup(dev);
+
+ em28xx_errdev("Sensor is %s, using model %s entry.\n",
sensor_name, em28xx_boards[dev->model].name);
return 0;
*/
void em28xx_pre_card_setup(struct em28xx *dev)
{
- int rc;
-
- em28xx_set_model(dev);
-
- em28xx_info("Identified as %s (card=%d)\n",
- dev->board.name, dev->model);
-
- /* Set the default GPO/GPIO for legacy devices */
- dev->reg_gpo_num = EM2880_R04_GPO;
- dev->reg_gpio_num = EM28XX_R08_GPIO;
-
- dev->wait_after_write = 5;
-
- /* Based on the Chip ID, set the device configuration */
- rc = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
- if (rc > 0) {
- dev->chip_id = rc;
-
- switch (dev->chip_id) {
- case CHIP_ID_EM2750:
- em28xx_info("chip ID is em2750\n");
- break;
- case CHIP_ID_EM2820:
- if (dev->board.is_27xx)
- em28xx_info("chip is em2710\n");
- else
- em28xx_info("chip ID is em2820\n");
- break;
- case CHIP_ID_EM2840:
- em28xx_info("chip ID is em2840\n");
- break;
- case CHIP_ID_EM2860:
- em28xx_info("chip ID is em2860\n");
- break;
- case CHIP_ID_EM2870:
- em28xx_info("chip ID is em2870\n");
- dev->wait_after_write = 0;
- break;
- case CHIP_ID_EM2874:
- em28xx_info("chip ID is em2874\n");
- dev->reg_gpio_num = EM2874_R80_GPIO;
- dev->wait_after_write = 0;
- break;
- case CHIP_ID_EM2883:
- em28xx_info("chip ID is em2882/em2883\n");
- dev->wait_after_write = 0;
- break;
- default:
- em28xx_info("em28xx chip ID = %d\n", dev->chip_id);
- }
- }
-
- /* Prepopulate cached GPO register content */
- rc = em28xx_read_reg(dev, dev->reg_gpo_num);
- if (rc >= 0)
- dev->reg_gpo = rc;
-
/* Set the initial XCLK and I2C clock values based on the board
definition */
em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f);
/* request some modules */
switch (dev->model) {
case EM2861_BOARD_PLEXTOR_PX_TV100U:
- /* FIXME guess */
- /* Turn on analog audio output */
- em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
+ /* Sets the msp34xx I2S speed */
+ dev->i2s_speed = 2048000;
break;
case EM2861_BOARD_KWORLD_PVRTV_300U:
case EM2880_BOARD_KWORLD_DVB_305U:
ctl->demod = XC3028_FE_ZARLINK456;
break;
case EM2880_BOARD_TERRATEC_HYBRID_XS:
+ case EM2881_BOARD_PINNACLE_HYBRID_PRO:
ctl->demod = XC3028_FE_ZARLINK456;
break;
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
void em28xx_card_setup(struct em28xx *dev)
{
- em28xx_set_model(dev);
+ /*
+ * If the device can be a webcam, seek for a sensor.
+ * If sensor is not found, then it isn't a webcam.
+ */
+ if (dev->board.is_webcam) {
+ if (em28xx_hint_sensor(dev) < 0)
+ dev->board.is_webcam = 0;
+ else
+ dev->progressive = 1;
+ } else
+ em28xx_set_model(dev);
+
+ em28xx_info("Identified as %s (card=%d)\n",
+ dev->board.name, dev->model);
dev->tuner_type = em28xx_boards[dev->model].tuner_type;
if (em28xx_boards[dev->model].tuner_addr)
em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
so make the call now so the analog GPIOs are set properly
before probing the i2c bus. */
+ em28xx_gpio_set(dev, dev->board.tuner_gpio);
em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
break;
- case EM2820_BOARD_SILVERCREST_WEBCAM:
- /* FIXME: need to document the registers bellow */
- em28xx_write_reg(dev, 0x0d, 0x42);
- em28xx_write_reg(dev, 0x13, 0x08);
}
if (dev->board.has_snapshot_button)
v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
"tvp5150", "tvp5150", tvp5150_addrs);
- if (dev->board.decoder == EM28XX_MT9V011)
- v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- "mt9v011", "mt9v011", mt9v011_addrs);
+ if (dev->em28xx_sensor == EM28XX_MT9V011) {
+ struct v4l2_subdev *sd;
+
+ sd = v4l2_i2c_new_probed_subdev(&dev->v4l2_dev,
+ &dev->i2c_adap, "mt9v011", "mt9v011", mt9v011_addrs);
+ v4l2_subdev_call(sd, core, s_config, 0, &dev->sensor_xtal);
+ }
+
if (dev->board.adecoder == EM28XX_TVAUDIO)
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
}
em28xx_tuner_setup(dev);
- em28xx_ir_init(dev);
+
+ if(!disable_ir)
+ em28xx_ir_init(dev);
}
int minor)
{
struct em28xx *dev = *devhandle;
- int retval = -ENOMEM;
+ int retval;
int errCode;
dev->udev = udev;
dev->em28xx_read_reg_req = em28xx_read_reg_req;
dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800;
+ em28xx_set_model(dev);
+
+ /* Set the default GPO/GPIO for legacy devices */
+ dev->reg_gpo_num = EM2880_R04_GPO;
+ dev->reg_gpio_num = EM28XX_R08_GPIO;
+
+ dev->wait_after_write = 5;
+
+ /* Based on the Chip ID, set the device configuration */
+ retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
+ if (retval > 0) {
+ dev->chip_id = retval;
+
+ switch (dev->chip_id) {
+ case CHIP_ID_EM2710:
+ em28xx_info("chip ID is em2710\n");
+ break;
+ case CHIP_ID_EM2750:
+ em28xx_info("chip ID is em2750\n");
+ break;
+ case CHIP_ID_EM2820:
+ em28xx_info("chip ID is em2820 (or em2710)\n");
+ break;
+ case CHIP_ID_EM2840:
+ em28xx_info("chip ID is em2840\n");
+ break;
+ case CHIP_ID_EM2860:
+ em28xx_info("chip ID is em2860\n");
+ break;
+ case CHIP_ID_EM2870:
+ em28xx_info("chip ID is em2870\n");
+ dev->wait_after_write = 0;
+ break;
+ case CHIP_ID_EM2874:
+ em28xx_info("chip ID is em2874\n");
+ dev->reg_gpio_num = EM2874_R80_GPIO;
+ dev->wait_after_write = 0;
+ break;
+ case CHIP_ID_EM2883:
+ em28xx_info("chip ID is em2882/em2883\n");
+ dev->wait_after_write = 0;
+ break;
+ default:
+ em28xx_info("em28xx chip ID = %d\n", dev->chip_id);
+ }
+ }
+
+ /* Prepopulate cached GPO register content */
+ retval = em28xx_read_reg(dev, dev->reg_gpo_num);
+ if (retval >= 0)
+ dev->reg_gpo = retval;
+
em28xx_pre_card_setup(dev);
if (!dev->board.is_em2800) {
return errCode;
}
- em28xx_hint_sensor(dev);
+ /*
+ * Default format, used for tvp5150 or saa711x output formats
+ */
+ dev->vinmode = 0x10;
+ dev->vinctl = 0x11;
/* Do board specific init and eeprom reading */
em28xx_card_setup(dev);
return rc;
}
+ if (dev->board.is_webcam)
+ rc = em28xx_write_reg(dev, 0x13, 0x0c);
+
/* enable video capture */
rc = em28xx_write_reg(dev, 0x48, 0x00);
int em28xx_set_outfmt(struct em28xx *dev)
{
int ret;
- int vinmode, vinctl, outfmt;
-
- outfmt = dev->format->reg;
-
- if (dev->board.is_27xx) {
- vinmode = 0x0d;
- vinctl = 0x00;
- } else {
- vinmode = 0x10;
- vinctl = 0x11;
- }
ret = em28xx_write_reg_bits(dev, EM28XX_R27_OUTFMT,
- outfmt | 0x20, 0xff);
+ dev->format->reg | 0x20, 0xff);
if (ret < 0)
return ret;
- ret = em28xx_write_reg(dev, EM28XX_R10_VINMODE, vinmode);
+ ret = em28xx_write_reg(dev, EM28XX_R10_VINMODE, dev->vinmode);
if (ret < 0)
return ret;
- return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, vinctl);
+ return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, dev->vinctl);
}
static int em28xx_accumulator_set(struct em28xx *dev, u8 xmin, u8 xmax,
u8 mode;
/* the em2800 scaler only supports scaling down to 50% */
- if (dev->board.is_27xx) {
- /* FIXME: Don't use the scaler yet */
- mode = 0;
- } else if (dev->board.is_em2800) {
+ if (dev->board.is_em2800) {
mode = (v ? 0x20 : 0x00) | (h ? 0x10 : 0x00);
} else {
u8 buf[2];
{
int width, height;
width = norm_maxw(dev);
- height = norm_maxh(dev) >> 1;
+ height = norm_maxh(dev);
+
+ if (!dev->progressive)
+ height >>= norm_maxh(dev);
em28xx_set_outfmt(dev);
#include "lgdt330x.h"
#include "zl10353.h"
#include "s5h1409.h"
+#include "mt352.h"
+#include "mt352_priv.h" /* FIXME */
MODULE_DESCRIPTION("driver for em28xx based DVB cards");
MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
.mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK
};
-static struct zl10353_config em28xx_terratec_xs_zl10353_xc3028 = {
+static struct zl10353_config em28xx_zl10353_xc3028_no_i2c_gate = {
.demod_address = (0x1e >> 1),
.no_tuner = 1,
.disable_i2c_gate_ctrl = 1,
};
#endif
+static int mt352_terratec_xs_init(struct dvb_frontend *fe)
+{
+ /* Values extracted from a USB trace of the Terratec Windows driver */
+ static u8 clock_config[] = { CLOCK_CTL, 0x38, 0x2c };
+ static u8 reset[] = { RESET, 0x80 };
+ static u8 adc_ctl_1_cfg[] = { ADC_CTL_1, 0x40 };
+ static u8 agc_cfg[] = { AGC_TARGET, 0x28, 0xa0 };
+ static u8 input_freq_cfg[] = { INPUT_FREQ_1, 0x31, 0xb8 };
+ static u8 rs_err_cfg[] = { RS_ERR_PER_1, 0x00, 0x4d };
+ static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 };
+ static u8 trl_nom_cfg[] = { TRL_NOMINAL_RATE_1, 0x64, 0x00 };
+ static u8 tps_given_cfg[] = { TPS_GIVEN_1, 0x40, 0x80, 0x50 };
+ static u8 tuner_go[] = { TUNER_GO, 0x01};
+
+ mt352_write(fe, clock_config, sizeof(clock_config));
+ udelay(200);
+ mt352_write(fe, reset, sizeof(reset));
+ mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg));
+ mt352_write(fe, agc_cfg, sizeof(agc_cfg));
+ mt352_write(fe, input_freq_cfg, sizeof(input_freq_cfg));
+ mt352_write(fe, rs_err_cfg, sizeof(rs_err_cfg));
+ mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
+ mt352_write(fe, trl_nom_cfg, sizeof(trl_nom_cfg));
+ mt352_write(fe, tps_given_cfg, sizeof(tps_given_cfg));
+ mt352_write(fe, tuner_go, sizeof(tuner_go));
+ return 0;
+}
+
+static struct mt352_config terratec_xs_mt352_cfg = {
+ .demod_address = (0x1e >> 1),
+ .no_tuner = 1,
+ .if2 = 45600,
+ .demod_init = mt352_terratec_xs_init,
+};
+
/* ------------------------------------------------------------------ */
static int attach_xc3028(u8 addr, struct em28xx *dev)
goto out_free;
}
break;
- case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
case EM2880_BOARD_KWORLD_DVB_310U:
- case EM2880_BOARD_EMPIRE_DUAL_TV:
dvb->frontend = dvb_attach(zl10353_attach,
&em28xx_zl10353_with_xc3028,
&dev->i2c_adap);
goto out_free;
}
break;
+ case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
+ case EM2880_BOARD_EMPIRE_DUAL_TV:
+ dvb->frontend = dvb_attach(zl10353_attach,
+ &em28xx_zl10353_xc3028_no_i2c_gate,
+ &dev->i2c_adap);
+ if (attach_xc3028(0x61, dev) < 0) {
+ result = -EINVAL;
+ goto out_free;
+ }
+ break;
case EM2880_BOARD_TERRATEC_HYBRID_XS:
+ case EM2881_BOARD_PINNACLE_HYBRID_PRO:
dvb->frontend = dvb_attach(zl10353_attach,
- &em28xx_terratec_xs_zl10353_xc3028,
+ &em28xx_zl10353_xc3028_no_i2c_gate,
&dev->i2c_adap);
if (dvb->frontend == NULL) {
/* This board could have either a zl10353 or a mt352.
If the chip id isn't for zl10353, try mt352 */
-
- /* FIXME: make support for mt352 work */
- printk(KERN_ERR "version of this board with mt352 not "
- "currently supported\n");
- result = -EINVAL;
- goto out_free;
+ dvb->frontend = dvb_attach(mt352_attach,
+ &terratec_xs_mt352_cfg,
+ &dev->i2c_adap);
}
+
if (attach_xc3028(0x61, dev) < 0) {
result = -EINVAL;
goto out_free;
/* FIXME: Need to be populated with the other chip ID's */
enum em28xx_chip_id {
- CHIP_ID_EM2820 = 18, /* Also used by em2710 */
+ CHIP_ID_EM2710 = 17,
+ CHIP_ID_EM2820 = 18, /* Also used by some em2710 */
CHIP_ID_EM2840 = 20,
CHIP_ID_EM2750 = 33,
CHIP_ID_EM2860 = 34,
startread = p;
remain = len;
- /* Interlaces frame */
- if (buf->top_field)
+ if (dev->progressive)
fieldstart = outp;
- else
- fieldstart = outp + bytesperline;
+ else {
+ /* Interlaces two half frames */
+ if (buf->top_field)
+ fieldstart = outp;
+ else
+ fieldstart = outp + bytesperline;
+ }
linesdone = dma_q->pos / bytesperline;
currlinedone = dma_q->pos % bytesperline;
- offset = linesdone * bytesperline * 2 + currlinedone;
+
+ if (dev->progressive)
+ offset = linesdone * bytesperline + currlinedone;
+ else
+ offset = linesdone * bytesperline * 2 + currlinedone;
+
startwrite = fieldstart + offset;
lencopy = bytesperline - currlinedone;
lencopy = lencopy > remain ? remain : lencopy;
em28xx_isocdbg("Video frame %d, length=%i, %s\n", p[2],
len, (p[2] & 1) ? "odd" : "even");
- if (!(p[2] & 1)) {
+ if (dev->progressive || !(p[2] & 1)) {
if (buf != NULL)
buffer_filled(dev, dma_q, buf);
get_next_buf(dma_q, &buf);
unsigned int width, unsigned int height,
unsigned int *hscale, unsigned int *vscale)
{
- unsigned int maxw = norm_maxw(dev);
- unsigned int maxh = norm_maxh(dev);
+ unsigned int maxw = norm_maxw(dev);
+ unsigned int maxh = norm_maxh(dev);
*hscale = (((unsigned long)maxw) << 12) / width - 4096L;
if (*hscale >= 0x4000)
f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
/* FIXME: TOP? NONE? BOTTOM? ALTENATE? */
- f->fmt.pix.field = dev->interlaced ?
+ if (dev->progressive)
+ f->fmt.pix.field = V4L2_FIELD_NONE;
+ else
+ f->fmt.pix.field = dev->interlaced ?
V4L2_FIELD_INTERLACED : V4L2_FIELD_TOP;
mutex_unlock(&dev->lock);
return -EINVAL;
}
- if (dev->board.is_27xx) {
- /* FIXME: This is the only supported fmt */
- width = 640;
- height = 480;
- } else if (dev->board.is_em2800) {
+ if (dev->board.is_em2800) {
/* the em2800 can only scale down to 50% */
height = height > (3 * maxh / 4) ? maxh : maxh / 2;
width = width > (3 * maxw / 4) ? maxw : maxw / 2;
f->fmt.pix.bytesperline = (dev->width * fmt->depth + 7) >> 3;
f->fmt.pix.sizeimage = f->fmt.pix.bytesperline * height;
f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
- f->fmt.pix.field = V4L2_FIELD_INTERLACED;
+ if (dev->progressive)
+ f->fmt.pix.field = V4L2_FIELD_NONE;
+ else
+ f->fmt.pix.field = dev->interlaced ?
+ V4L2_FIELD_INTERLACED : V4L2_FIELD_TOP;
return 0;
}
{
struct em28xx_fmt *fmt;
- /* FIXME: This is the only supported fmt */
- if (dev->board.is_27xx) {
- width = 640;
- height = 480;
- }
-
fmt = format_by_fourcc(fourcc);
if (!fmt)
return -EINVAL;
return 0;
}
+static int vidioc_g_parm(struct file *file, void *priv,
+ struct v4l2_streamparm *p)
+{
+ struct em28xx_fh *fh = priv;
+ struct em28xx *dev = fh->dev;
+ int rc = 0;
+
+ if (p->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ if (dev->board.is_webcam)
+ rc = v4l2_device_call_until_err(&dev->v4l2_dev, 0,
+ video, g_parm, p);
+ else
+ v4l2_video_std_frame_period(dev->norm,
+ &p->parm.capture.timeperframe);
+
+ return rc;
+}
+
+static int vidioc_s_parm(struct file *file, void *priv,
+ struct v4l2_streamparm *p)
+{
+ struct em28xx_fh *fh = priv;
+ struct em28xx *dev = fh->dev;
+
+ if (!dev->board.is_webcam)
+ return -EINVAL;
+
+ if (p->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ return v4l2_device_call_until_err(&dev->v4l2_dev, 0, video, s_parm, p);
+}
+
static const char *iname[] = {
[EM28XX_VMUX_COMPOSITE1] = "Composite1",
[EM28XX_VMUX_COMPOSITE2] = "Composite2",
struct em28xx *dev;
enum v4l2_buf_type fh_type;
struct em28xx_fh *fh;
+ enum v4l2_field field;
dev = em28xx_get_device(minor, &fh_type, &radio);
dev->users++;
+ if (dev->progressive)
+ field = V4L2_FIELD_NONE;
+ else
+ field = V4L2_FIELD_INTERLACED;
+
videobuf_queue_vmalloc_init(&fh->vb_vidq, &em28xx_video_qops,
- NULL, &dev->slock, fh->type, V4L2_FIELD_INTERLACED,
+ NULL, &dev->slock, fh->type, field,
sizeof(struct em28xx_buffer), fh);
mutex_unlock(&dev->lock);
.vidioc_qbuf = vidioc_qbuf,
.vidioc_dqbuf = vidioc_dqbuf,
.vidioc_s_std = vidioc_s_std,
+ .vidioc_g_parm = vidioc_g_parm,
+ .vidioc_s_parm = vidioc_s_parm,
.vidioc_enum_input = vidioc_enum_input,
.vidioc_g_input = vidioc_g_input,
.vidioc_s_input = vidioc_s_input,
#define INPUT(nr) (&em28xx_boards[dev->model].input[nr])
enum em28xx_decoder {
- EM28XX_NODECODER,
+ EM28XX_NODECODER = 0,
EM28XX_TVP5150,
EM28XX_SAA711X,
+};
+
+enum em28xx_sensor {
+ EM28XX_NOSENSOR = 0,
EM28XX_MT9V011,
+ EM28XX_MT9M001,
+ EM28XX_MT9M111,
};
enum em28xx_adecoder {
unsigned int max_range_640_480:1;
unsigned int has_dvb:1;
unsigned int has_snapshot_button:1;
- unsigned int is_27xx:1;
+ unsigned int is_webcam:1;
unsigned int valid:1;
unsigned char xclk, i2c_speed;
struct v4l2_device v4l2_dev;
struct em28xx_board board;
+ /* Webcam specific fields */
+ enum em28xx_sensor em28xx_sensor;
+ int sensor_xres, sensor_yres;
+ int sensor_xtal;
+
+ /* Allows progressive (e. g. non-interlaced) mode */
+ int progressive;
+
+ /* Vinmode/Vinctl used at the driver */
+ int vinmode, vinctl;
+
unsigned int stream_on:1; /* Locks streams */
unsigned int has_audio_class:1;
unsigned int has_alsa_audio:1;
/*FIXME: maxw should be dependent of alt mode */
static inline unsigned int norm_maxw(struct em28xx *dev)
{
+ if (dev->board.is_webcam)
+ return dev->sensor_xres;
+
if (dev->board.max_range_640_480)
return 640;
- else
- return 720;
+
+ return 720;
}
static inline unsigned int norm_maxh(struct em28xx *dev)
{
+ if (dev->board.is_webcam)
+ return dev->sensor_yres;
+
if (dev->board.max_range_640_480)
return 480;
- else
- return (dev->norm & V4L2_STD_625_50) ? 576 : 480;
+
+ return (dev->norm & V4L2_STD_625_50) ? 576 : 480;
}
#endif
To compile this driver as a module, choose M here: the
module will be called gspca_pac7311.
+config USB_GSPCA_SN9C20X
+ tristate "SN9C20X USB Camera Driver"
+ depends on VIDEO_V4L2 && USB_GSPCA
+ help
+ Say Y here if you want support for cameras based on the
+ sn9c20x chips (SN9C201 and SN9C202).
+
+ To compile this driver as a module, choose M here: the
+ module will be called gspca_sn9c20x.
+
+config USB_GSPCA_SN9C20X_EVDEV
+ bool "Enable evdev support"
+ depends on USB_GSPCA_SN9C20X && INPUT
+ ---help---
+ Say Y here in order to enable evdev support for sn9c20x webcam button.
+
config USB_GSPCA_SONIXB
tristate "SONIX Bayer USB Camera Driver"
depends on VIDEO_V4L2 && USB_GSPCA
obj-$(CONFIG_USB_GSPCA_OV534) += gspca_ov534.o
obj-$(CONFIG_USB_GSPCA_PAC207) += gspca_pac207.o
obj-$(CONFIG_USB_GSPCA_PAC7311) += gspca_pac7311.o
+obj-$(CONFIG_USB_GSPCA_SN9C20X) += gspca_sn9c20x.o
obj-$(CONFIG_USB_GSPCA_SONIXB) += gspca_sonixb.o
obj-$(CONFIG_USB_GSPCA_SONIXJ) += gspca_sonixj.o
obj-$(CONFIG_USB_GSPCA_SPCA500) += gspca_spca500.o
gspca_ov534-objs := ov534.o
gspca_pac207-objs := pac207.o
gspca_pac7311-objs := pac7311.o
+gspca_sn9c20x-objs := sn9c20x.o
gspca_sonixb-objs := sonixb.o
gspca_sonixj-objs := sonixj.o
gspca_spca500-objs := spca500.o
/* create the JPEG header */
sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+ if (!sd->jpeg_hdr)
+ return -ENOMEM;
jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
0x22); /* JPEG 411 */
jpeg_set_qual(sd->jpeg_hdr, sd->quality);
return -EINVAL;
}
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int vidioc_g_register(struct file *file, void *priv,
+ struct v4l2_dbg_register *reg)
+{
+ int ret;
+ struct gspca_dev *gspca_dev = priv;
+
+ if (!gspca_dev->sd_desc->get_chip_ident)
+ return -EINVAL;
+
+ if (!gspca_dev->sd_desc->get_register)
+ return -EINVAL;
+
+ if (mutex_lock_interruptible(&gspca_dev->usb_lock))
+ return -ERESTARTSYS;
+ if (gspca_dev->present)
+ ret = gspca_dev->sd_desc->get_register(gspca_dev, reg);
+ else
+ ret = -ENODEV;
+ mutex_unlock(&gspca_dev->usb_lock);
+
+ return ret;
+}
+
+static int vidioc_s_register(struct file *file, void *priv,
+ struct v4l2_dbg_register *reg)
+{
+ int ret;
+ struct gspca_dev *gspca_dev = priv;
+
+ if (!gspca_dev->sd_desc->get_chip_ident)
+ return -EINVAL;
+
+ if (!gspca_dev->sd_desc->set_register)
+ return -EINVAL;
+
+ if (mutex_lock_interruptible(&gspca_dev->usb_lock))
+ return -ERESTARTSYS;
+ if (gspca_dev->present)
+ ret = gspca_dev->sd_desc->set_register(gspca_dev, reg);
+ else
+ ret = -ENODEV;
+ mutex_unlock(&gspca_dev->usb_lock);
+
+ return ret;
+}
+#endif
+
+static int vidioc_g_chip_ident(struct file *file, void *priv,
+ struct v4l2_dbg_chip_ident *chip)
+{
+ int ret;
+ struct gspca_dev *gspca_dev = priv;
+
+ if (!gspca_dev->sd_desc->get_chip_ident)
+ return -EINVAL;
+
+ if (mutex_lock_interruptible(&gspca_dev->usb_lock))
+ return -ERESTARTSYS;
+ if (gspca_dev->present)
+ ret = gspca_dev->sd_desc->get_chip_ident(gspca_dev, chip);
+ else
+ ret = -ENODEV;
+ mutex_unlock(&gspca_dev->usb_lock);
+
+ return ret;
+}
+
static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv,
struct v4l2_fmtdesc *fmtdesc)
{
.vidioc_s_parm = vidioc_s_parm,
.vidioc_s_std = vidioc_s_std,
.vidioc_enum_framesizes = vidioc_enum_framesizes,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ .vidioc_g_register = vidioc_g_register,
+ .vidioc_s_register = vidioc_s_register,
+#endif
+ .vidioc_g_chip_ident = vidioc_g_chip_ident,
#ifdef CONFIG_VIDEO_V4L1_COMPAT
.vidiocgmbuf = vidiocgmbuf,
#endif
typedef int (*cam_cf_op) (struct gspca_dev *, const struct usb_device_id *);
typedef int (*cam_jpg_op) (struct gspca_dev *,
struct v4l2_jpegcompression *);
+typedef int (*cam_reg_op) (struct gspca_dev *,
+ struct v4l2_dbg_register *);
+typedef int (*cam_ident_op) (struct gspca_dev *,
+ struct v4l2_dbg_chip_ident *);
typedef int (*cam_streamparm_op) (struct gspca_dev *,
struct v4l2_streamparm *);
typedef int (*cam_qmnu_op) (struct gspca_dev *,
cam_qmnu_op querymenu;
cam_streamparm_op get_streamparm;
cam_streamparm_op set_streamparm;
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ cam_reg_op set_register;
+ cam_reg_op get_register;
+#endif
+ cam_ident_op get_chip_ident;
};
/* packet types when moving from iso buf to frame buf */
PDEBUG(D_V4L2, "Set vertical flip to %d", val);
err = m5602_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1);
- if (err < 0)
- return err;
- err = m5602_write_sensor(sd, S5K4AA_READ_MODE, &data, 1);
if (err < 0)
return err;
PDEBUG(D_V4L2, "Set horizontal flip to %d", val);
err = m5602_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1);
- if (err < 0)
- return err;
- err = m5602_write_sensor(sd, S5K4AA_READ_MODE, &data, 1);
if (err < 0)
return err;
/* create the JPEG header */
sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+ if (!sd->jpeg_hdr)
+ return -ENOMEM;
jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
0x21); /* JPEG 422 */
jpeg_set_qual(sd->jpeg_hdr, sd->quality);
--- /dev/null
+/*
+ * Sonix sn9c201 sn9c202 library
+ * Copyright (C) 2008-2009 microdia project <microdia@googlegroups.com>
+ * Copyright (C) 2009 Brian Johnson <brijohn@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifdef CONFIG_USB_GSPCA_SN9C20X_EVDEV
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/usb/input.h>
+#include <linux/input.h>
+#endif
+
+#include "gspca.h"
+#include "jpeg.h"
+
+#include <media/v4l2-chip-ident.h>
+
+MODULE_AUTHOR("Brian Johnson <brijohn@gmail.com>, "
+ "microdia project <microdia@googlegroups.com>");
+MODULE_DESCRIPTION("GSPCA/SN9C20X USB Camera Driver");
+MODULE_LICENSE("GPL");
+
+#define MODULE_NAME "sn9c20x"
+
+#define MODE_RAW 0x10
+#define MODE_JPEG 0x20
+#define MODE_SXGA 0x80
+
+#define SENSOR_OV9650 0
+#define SENSOR_OV9655 1
+#define SENSOR_SOI968 2
+#define SENSOR_OV7660 3
+#define SENSOR_OV7670 4
+#define SENSOR_MT9V011 5
+#define SENSOR_MT9V111 6
+#define SENSOR_MT9V112 7
+#define SENSOR_MT9M001 8
+#define SENSOR_MT9M111 9
+#define SENSOR_HV7131R 10
+#define SENSOR_MT9VPRB 20
+
+/* specific webcam descriptor */
+struct sd {
+ struct gspca_dev gspca_dev;
+
+#define MIN_AVG_LUM 80
+#define MAX_AVG_LUM 130
+ atomic_t avg_lum;
+ u8 old_step;
+ u8 older_step;
+ u8 exposure_step;
+
+ u8 brightness;
+ u8 contrast;
+ u8 saturation;
+ s16 hue;
+ u8 gamma;
+ u8 red;
+ u8 blue;
+
+ u8 hflip;
+ u8 vflip;
+ u8 gain;
+ u16 exposure;
+ u8 auto_exposure;
+
+ u8 i2c_addr;
+ u8 sensor;
+ u8 hstart;
+ u8 vstart;
+
+ u8 *jpeg_hdr;
+ u8 quality;
+
+#ifdef CONFIG_USB_GSPCA_SN9C20X_EVDEV
+ struct input_dev *input_dev;
+ u8 input_gpio;
+ struct task_struct *input_task;
+#endif
+};
+
+static int sd_setbrightness(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getbrightness(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setcontrast(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getcontrast(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setsaturation(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getsaturation(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_sethue(struct gspca_dev *gspca_dev, s32 val);
+static int sd_gethue(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setgamma(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getgamma(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setredbalance(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getredbalance(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setbluebalance(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getbluebalance(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setvflip(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getvflip(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_sethflip(struct gspca_dev *gspca_dev, s32 val);
+static int sd_gethflip(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setgain(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getgain(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setexposure(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getexposure(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setautoexposure(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getautoexposure(struct gspca_dev *gspca_dev, s32 *val);
+
+static struct ctrl sd_ctrls[] = {
+ {
+#define BRIGHTNESS_IDX 0
+ {
+ .id = V4L2_CID_BRIGHTNESS,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Brightness",
+ .minimum = 0,
+ .maximum = 0xff,
+ .step = 1,
+#define BRIGHTNESS_DEFAULT 0x7f
+ .default_value = BRIGHTNESS_DEFAULT,
+ },
+ .set = sd_setbrightness,
+ .get = sd_getbrightness,
+ },
+ {
+#define CONTRAST_IDX 1
+ {
+ .id = V4L2_CID_CONTRAST,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Contrast",
+ .minimum = 0,
+ .maximum = 0xff,
+ .step = 1,
+#define CONTRAST_DEFAULT 0x7f
+ .default_value = CONTRAST_DEFAULT,
+ },
+ .set = sd_setcontrast,
+ .get = sd_getcontrast,
+ },
+ {
+#define SATURATION_IDX 2
+ {
+ .id = V4L2_CID_SATURATION,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Saturation",
+ .minimum = 0,
+ .maximum = 0xff,
+ .step = 1,
+#define SATURATION_DEFAULT 0x7f
+ .default_value = SATURATION_DEFAULT,
+ },
+ .set = sd_setsaturation,
+ .get = sd_getsaturation,
+ },
+ {
+#define HUE_IDX 3
+ {
+ .id = V4L2_CID_HUE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Hue",
+ .minimum = -180,
+ .maximum = 180,
+ .step = 1,
+#define HUE_DEFAULT 0
+ .default_value = HUE_DEFAULT,
+ },
+ .set = sd_sethue,
+ .get = sd_gethue,
+ },
+ {
+#define GAMMA_IDX 4
+ {
+ .id = V4L2_CID_GAMMA,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Gamma",
+ .minimum = 0,
+ .maximum = 0xff,
+ .step = 1,
+#define GAMMA_DEFAULT 0x10
+ .default_value = GAMMA_DEFAULT,
+ },
+ .set = sd_setgamma,
+ .get = sd_getgamma,
+ },
+ {
+#define BLUE_IDX 5
+ {
+ .id = V4L2_CID_BLUE_BALANCE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Blue Balance",
+ .minimum = 0,
+ .maximum = 0x7f,
+ .step = 1,
+#define BLUE_DEFAULT 0x28
+ .default_value = BLUE_DEFAULT,
+ },
+ .set = sd_setbluebalance,
+ .get = sd_getbluebalance,
+ },
+ {
+#define RED_IDX 6
+ {
+ .id = V4L2_CID_RED_BALANCE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Red Balance",
+ .minimum = 0,
+ .maximum = 0x7f,
+ .step = 1,
+#define RED_DEFAULT 0x28
+ .default_value = RED_DEFAULT,
+ },
+ .set = sd_setredbalance,
+ .get = sd_getredbalance,
+ },
+ {
+#define HFLIP_IDX 7
+ {
+ .id = V4L2_CID_HFLIP,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Horizontal Flip",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 1,
+#define HFLIP_DEFAULT 0
+ .default_value = HFLIP_DEFAULT,
+ },
+ .set = sd_sethflip,
+ .get = sd_gethflip,
+ },
+ {
+#define VFLIP_IDX 8
+ {
+ .id = V4L2_CID_VFLIP,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Vertical Flip",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 1,
+#define VFLIP_DEFAULT 0
+ .default_value = VFLIP_DEFAULT,
+ },
+ .set = sd_setvflip,
+ .get = sd_getvflip,
+ },
+ {
+#define EXPOSURE_IDX 9
+ {
+ .id = V4L2_CID_EXPOSURE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Exposure",
+ .minimum = 0,
+ .maximum = 0x1780,
+ .step = 1,
+#define EXPOSURE_DEFAULT 0x33
+ .default_value = EXPOSURE_DEFAULT,
+ },
+ .set = sd_setexposure,
+ .get = sd_getexposure,
+ },
+ {
+#define GAIN_IDX 10
+ {
+ .id = V4L2_CID_GAIN,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Gain",
+ .minimum = 0,
+ .maximum = 28,
+ .step = 1,
+#define GAIN_DEFAULT 0x00
+ .default_value = GAIN_DEFAULT,
+ },
+ .set = sd_setgain,
+ .get = sd_getgain,
+ },
+ {
+#define AUTOGAIN_IDX 11
+ {
+ .id = V4L2_CID_AUTOGAIN,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Auto Exposure",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 1,
+#define AUTO_EXPOSURE_DEFAULT 1
+ .default_value = AUTO_EXPOSURE_DEFAULT,
+ },
+ .set = sd_setautoexposure,
+ .get = sd_getautoexposure,
+ },
+};
+
+static const struct v4l2_pix_format vga_mode[] = {
+ {160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ .bytesperline = 240,
+ .sizeimage = 240 * 120,
+ .colorspace = V4L2_COLORSPACE_JPEG,
+ .priv = 0 | MODE_JPEG},
+ {160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+ .bytesperline = 160,
+ .sizeimage = 160 * 120,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 0 | MODE_RAW},
+ {160, 120, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
+ .bytesperline = 240,
+ .sizeimage = 240 * 120,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 0},
+ {320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ .bytesperline = 480,
+ .sizeimage = 480 * 240 ,
+ .colorspace = V4L2_COLORSPACE_JPEG,
+ .priv = 1 | MODE_JPEG},
+ {320, 240, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+ .bytesperline = 320,
+ .sizeimage = 320 * 240 ,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 1 | MODE_RAW},
+ {320, 240, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
+ .bytesperline = 480,
+ .sizeimage = 480 * 240 ,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 1},
+ {640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ .bytesperline = 960,
+ .sizeimage = 960 * 480,
+ .colorspace = V4L2_COLORSPACE_JPEG,
+ .priv = 2 | MODE_JPEG},
+ {640, 480, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+ .bytesperline = 640,
+ .sizeimage = 640 * 480,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 2 | MODE_RAW},
+ {640, 480, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
+ .bytesperline = 960,
+ .sizeimage = 960 * 480,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 2},
+};
+
+static const struct v4l2_pix_format sxga_mode[] = {
+ {160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ .bytesperline = 240,
+ .sizeimage = 240 * 120,
+ .colorspace = V4L2_COLORSPACE_JPEG,
+ .priv = 0 | MODE_JPEG},
+ {160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+ .bytesperline = 160,
+ .sizeimage = 160 * 120,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 0 | MODE_RAW},
+ {160, 120, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
+ .bytesperline = 240,
+ .sizeimage = 240 * 120,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 0},
+ {320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ .bytesperline = 480,
+ .sizeimage = 480 * 240 ,
+ .colorspace = V4L2_COLORSPACE_JPEG,
+ .priv = 1 | MODE_JPEG},
+ {320, 240, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+ .bytesperline = 320,
+ .sizeimage = 320 * 240 ,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 1 | MODE_RAW},
+ {320, 240, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
+ .bytesperline = 480,
+ .sizeimage = 480 * 240 ,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 1},
+ {640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ .bytesperline = 960,
+ .sizeimage = 960 * 480,
+ .colorspace = V4L2_COLORSPACE_JPEG,
+ .priv = 2 | MODE_JPEG},
+ {640, 480, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+ .bytesperline = 640,
+ .sizeimage = 640 * 480,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 2 | MODE_RAW},
+ {640, 480, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
+ .bytesperline = 960,
+ .sizeimage = 960 * 480,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 2},
+ {1280, 1024, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+ .bytesperline = 1280,
+ .sizeimage = (1280 * 1024) + 64,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 3 | MODE_RAW | MODE_SXGA},
+};
+
+static const int hsv_red_x[] = {
+ 41, 44, 46, 48, 50, 52, 54, 56,
+ 58, 60, 62, 64, 66, 68, 70, 72,
+ 74, 76, 78, 80, 81, 83, 85, 87,
+ 88, 90, 92, 93, 95, 97, 98, 100,
+ 101, 102, 104, 105, 107, 108, 109, 110,
+ 112, 113, 114, 115, 116, 117, 118, 119,
+ 120, 121, 122, 123, 123, 124, 125, 125,
+ 126, 127, 127, 128, 128, 129, 129, 129,
+ 130, 130, 130, 130, 131, 131, 131, 131,
+ 131, 131, 131, 131, 130, 130, 130, 130,
+ 129, 129, 129, 128, 128, 127, 127, 126,
+ 125, 125, 124, 123, 122, 122, 121, 120,
+ 119, 118, 117, 116, 115, 114, 112, 111,
+ 110, 109, 107, 106, 105, 103, 102, 101,
+ 99, 98, 96, 94, 93, 91, 90, 88,
+ 86, 84, 83, 81, 79, 77, 75, 74,
+ 72, 70, 68, 66, 64, 62, 60, 58,
+ 56, 54, 52, 49, 47, 45, 43, 41,
+ 39, 36, 34, 32, 30, 28, 25, 23,
+ 21, 19, 16, 14, 12, 9, 7, 5,
+ 3, 0, -1, -3, -6, -8, -10, -12,
+ -15, -17, -19, -22, -24, -26, -28, -30,
+ -33, -35, -37, -39, -41, -44, -46, -48,
+ -50, -52, -54, -56, -58, -60, -62, -64,
+ -66, -68, -70, -72, -74, -76, -78, -80,
+ -81, -83, -85, -87, -88, -90, -92, -93,
+ -95, -97, -98, -100, -101, -102, -104, -105,
+ -107, -108, -109, -110, -112, -113, -114, -115,
+ -116, -117, -118, -119, -120, -121, -122, -123,
+ -123, -124, -125, -125, -126, -127, -127, -128,
+ -128, -128, -128, -128, -128, -128, -128, -128,
+ -128, -128, -128, -128, -128, -128, -128, -128,
+ -128, -128, -128, -128, -128, -128, -128, -128,
+ -128, -127, -127, -126, -125, -125, -124, -123,
+ -122, -122, -121, -120, -119, -118, -117, -116,
+ -115, -114, -112, -111, -110, -109, -107, -106,
+ -105, -103, -102, -101, -99, -98, -96, -94,
+ -93, -91, -90, -88, -86, -84, -83, -81,
+ -79, -77, -75, -74, -72, -70, -68, -66,
+ -64, -62, -60, -58, -56, -54, -52, -49,
+ -47, -45, -43, -41, -39, -36, -34, -32,
+ -30, -28, -25, -23, -21, -19, -16, -14,
+ -12, -9, -7, -5, -3, 0, 1, 3,
+ 6, 8, 10, 12, 15, 17, 19, 22,
+ 24, 26, 28, 30, 33, 35, 37, 39, 41
+};
+
+static const int hsv_red_y[] = {
+ 82, 80, 78, 76, 74, 73, 71, 69,
+ 67, 65, 63, 61, 58, 56, 54, 52,
+ 50, 48, 46, 44, 41, 39, 37, 35,
+ 32, 30, 28, 26, 23, 21, 19, 16,
+ 14, 12, 10, 7, 5, 3, 0, -1,
+ -3, -6, -8, -10, -13, -15, -17, -19,
+ -22, -24, -26, -29, -31, -33, -35, -38,
+ -40, -42, -44, -46, -48, -51, -53, -55,
+ -57, -59, -61, -63, -65, -67, -69, -71,
+ -73, -75, -77, -79, -81, -82, -84, -86,
+ -88, -89, -91, -93, -94, -96, -98, -99,
+ -101, -102, -104, -105, -106, -108, -109, -110,
+ -112, -113, -114, -115, -116, -117, -119, -120,
+ -120, -121, -122, -123, -124, -125, -126, -126,
+ -127, -128, -128, -128, -128, -128, -128, -128,
+ -128, -128, -128, -128, -128, -128, -128, -128,
+ -128, -128, -128, -128, -128, -128, -128, -128,
+ -128, -128, -128, -128, -128, -128, -128, -128,
+ -127, -127, -126, -125, -125, -124, -123, -122,
+ -121, -120, -119, -118, -117, -116, -115, -114,
+ -113, -111, -110, -109, -107, -106, -105, -103,
+ -102, -100, -99, -97, -96, -94, -92, -91,
+ -89, -87, -85, -84, -82, -80, -78, -76,
+ -74, -73, -71, -69, -67, -65, -63, -61,
+ -58, -56, -54, -52, -50, -48, -46, -44,
+ -41, -39, -37, -35, -32, -30, -28, -26,
+ -23, -21, -19, -16, -14, -12, -10, -7,
+ -5, -3, 0, 1, 3, 6, 8, 10,
+ 13, 15, 17, 19, 22, 24, 26, 29,
+ 31, 33, 35, 38, 40, 42, 44, 46,
+ 48, 51, 53, 55, 57, 59, 61, 63,
+ 65, 67, 69, 71, 73, 75, 77, 79,
+ 81, 82, 84, 86, 88, 89, 91, 93,
+ 94, 96, 98, 99, 101, 102, 104, 105,
+ 106, 108, 109, 110, 112, 113, 114, 115,
+ 116, 117, 119, 120, 120, 121, 122, 123,
+ 124, 125, 126, 126, 127, 128, 128, 129,
+ 129, 130, 130, 131, 131, 131, 131, 132,
+ 132, 132, 132, 132, 132, 132, 132, 132,
+ 132, 132, 132, 131, 131, 131, 130, 130,
+ 130, 129, 129, 128, 127, 127, 126, 125,
+ 125, 124, 123, 122, 121, 120, 119, 118,
+ 117, 116, 115, 114, 113, 111, 110, 109,
+ 107, 106, 105, 103, 102, 100, 99, 97,
+ 96, 94, 92, 91, 89, 87, 85, 84, 82
+};
+
+static const int hsv_green_x[] = {
+ -124, -124, -125, -125, -125, -125, -125, -125,
+ -125, -126, -126, -125, -125, -125, -125, -125,
+ -125, -124, -124, -124, -123, -123, -122, -122,
+ -121, -121, -120, -120, -119, -118, -117, -117,
+ -116, -115, -114, -113, -112, -111, -110, -109,
+ -108, -107, -105, -104, -103, -102, -100, -99,
+ -98, -96, -95, -93, -92, -91, -89, -87,
+ -86, -84, -83, -81, -79, -77, -76, -74,
+ -72, -70, -69, -67, -65, -63, -61, -59,
+ -57, -55, -53, -51, -49, -47, -45, -43,
+ -41, -39, -37, -35, -33, -30, -28, -26,
+ -24, -22, -20, -18, -15, -13, -11, -9,
+ -7, -4, -2, 0, 1, 3, 6, 8,
+ 10, 12, 14, 17, 19, 21, 23, 25,
+ 27, 29, 32, 34, 36, 38, 40, 42,
+ 44, 46, 48, 50, 52, 54, 56, 58,
+ 60, 62, 64, 66, 68, 70, 71, 73,
+ 75, 77, 78, 80, 82, 83, 85, 87,
+ 88, 90, 91, 93, 94, 96, 97, 98,
+ 100, 101, 102, 104, 105, 106, 107, 108,
+ 109, 111, 112, 113, 113, 114, 115, 116,
+ 117, 118, 118, 119, 120, 120, 121, 122,
+ 122, 123, 123, 124, 124, 124, 125, 125,
+ 125, 125, 125, 125, 125, 126, 126, 125,
+ 125, 125, 125, 125, 125, 124, 124, 124,
+ 123, 123, 122, 122, 121, 121, 120, 120,
+ 119, 118, 117, 117, 116, 115, 114, 113,
+ 112, 111, 110, 109, 108, 107, 105, 104,
+ 103, 102, 100, 99, 98, 96, 95, 93,
+ 92, 91, 89, 87, 86, 84, 83, 81,
+ 79, 77, 76, 74, 72, 70, 69, 67,
+ 65, 63, 61, 59, 57, 55, 53, 51,
+ 49, 47, 45, 43, 41, 39, 37, 35,
+ 33, 30, 28, 26, 24, 22, 20, 18,
+ 15, 13, 11, 9, 7, 4, 2, 0,
+ -1, -3, -6, -8, -10, -12, -14, -17,
+ -19, -21, -23, -25, -27, -29, -32, -34,
+ -36, -38, -40, -42, -44, -46, -48, -50,
+ -52, -54, -56, -58, -60, -62, -64, -66,
+ -68, -70, -71, -73, -75, -77, -78, -80,
+ -82, -83, -85, -87, -88, -90, -91, -93,
+ -94, -96, -97, -98, -100, -101, -102, -104,
+ -105, -106, -107, -108, -109, -111, -112, -113,
+ -113, -114, -115, -116, -117, -118, -118, -119,
+ -120, -120, -121, -122, -122, -123, -123, -124, -124
+};
+
+static const int hsv_green_y[] = {
+ -100, -99, -98, -97, -95, -94, -93, -91,
+ -90, -89, -87, -86, -84, -83, -81, -80,
+ -78, -76, -75, -73, -71, -70, -68, -66,
+ -64, -63, -61, -59, -57, -55, -53, -51,
+ -49, -48, -46, -44, -42, -40, -38, -36,
+ -34, -32, -30, -27, -25, -23, -21, -19,
+ -17, -15, -13, -11, -9, -7, -4, -2,
+ 0, 1, 3, 5, 7, 9, 11, 14,
+ 16, 18, 20, 22, 24, 26, 28, 30,
+ 32, 34, 36, 38, 40, 42, 44, 46,
+ 48, 50, 52, 54, 56, 58, 59, 61,
+ 63, 65, 67, 68, 70, 72, 74, 75,
+ 77, 78, 80, 82, 83, 85, 86, 88,
+ 89, 90, 92, 93, 95, 96, 97, 98,
+ 100, 101, 102, 103, 104, 105, 106, 107,
+ 108, 109, 110, 111, 112, 112, 113, 114,
+ 115, 115, 116, 116, 117, 117, 118, 118,
+ 119, 119, 119, 120, 120, 120, 120, 120,
+ 121, 121, 121, 121, 121, 121, 120, 120,
+ 120, 120, 120, 119, 119, 119, 118, 118,
+ 117, 117, 116, 116, 115, 114, 114, 113,
+ 112, 111, 111, 110, 109, 108, 107, 106,
+ 105, 104, 103, 102, 100, 99, 98, 97,
+ 95, 94, 93, 91, 90, 89, 87, 86,
+ 84, 83, 81, 80, 78, 76, 75, 73,
+ 71, 70, 68, 66, 64, 63, 61, 59,
+ 57, 55, 53, 51, 49, 48, 46, 44,
+ 42, 40, 38, 36, 34, 32, 30, 27,
+ 25, 23, 21, 19, 17, 15, 13, 11,
+ 9, 7, 4, 2, 0, -1, -3, -5,
+ -7, -9, -11, -14, -16, -18, -20, -22,
+ -24, -26, -28, -30, -32, -34, -36, -38,
+ -40, -42, -44, -46, -48, -50, -52, -54,
+ -56, -58, -59, -61, -63, -65, -67, -68,
+ -70, -72, -74, -75, -77, -78, -80, -82,
+ -83, -85, -86, -88, -89, -90, -92, -93,
+ -95, -96, -97, -98, -100, -101, -102, -103,
+ -104, -105, -106, -107, -108, -109, -110, -111,
+ -112, -112, -113, -114, -115, -115, -116, -116,
+ -117, -117, -118, -118, -119, -119, -119, -120,
+ -120, -120, -120, -120, -121, -121, -121, -121,
+ -121, -121, -120, -120, -120, -120, -120, -119,
+ -119, -119, -118, -118, -117, -117, -116, -116,
+ -115, -114, -114, -113, -112, -111, -111, -110,
+ -109, -108, -107, -106, -105, -104, -103, -102, -100
+};
+
+static const int hsv_blue_x[] = {
+ 112, 113, 114, 114, 115, 116, 117, 117,
+ 118, 118, 119, 119, 120, 120, 120, 121,
+ 121, 121, 122, 122, 122, 122, 122, 122,
+ 122, 122, 122, 122, 122, 122, 121, 121,
+ 121, 120, 120, 120, 119, 119, 118, 118,
+ 117, 116, 116, 115, 114, 113, 113, 112,
+ 111, 110, 109, 108, 107, 106, 105, 104,
+ 103, 102, 100, 99, 98, 97, 95, 94,
+ 93, 91, 90, 88, 87, 85, 84, 82,
+ 80, 79, 77, 76, 74, 72, 70, 69,
+ 67, 65, 63, 61, 60, 58, 56, 54,
+ 52, 50, 48, 46, 44, 42, 40, 38,
+ 36, 34, 32, 30, 28, 26, 24, 22,
+ 19, 17, 15, 13, 11, 9, 7, 5,
+ 2, 0, -1, -3, -5, -7, -9, -12,
+ -14, -16, -18, -20, -22, -24, -26, -28,
+ -31, -33, -35, -37, -39, -41, -43, -45,
+ -47, -49, -51, -53, -54, -56, -58, -60,
+ -62, -64, -66, -67, -69, -71, -73, -74,
+ -76, -78, -79, -81, -83, -84, -86, -87,
+ -89, -90, -92, -93, -94, -96, -97, -98,
+ -99, -101, -102, -103, -104, -105, -106, -107,
+ -108, -109, -110, -111, -112, -113, -114, -114,
+ -115, -116, -117, -117, -118, -118, -119, -119,
+ -120, -120, -120, -121, -121, -121, -122, -122,
+ -122, -122, -122, -122, -122, -122, -122, -122,
+ -122, -122, -121, -121, -121, -120, -120, -120,
+ -119, -119, -118, -118, -117, -116, -116, -115,
+ -114, -113, -113, -112, -111, -110, -109, -108,
+ -107, -106, -105, -104, -103, -102, -100, -99,
+ -98, -97, -95, -94, -93, -91, -90, -88,
+ -87, -85, -84, -82, -80, -79, -77, -76,
+ -74, -72, -70, -69, -67, -65, -63, -61,
+ -60, -58, -56, -54, -52, -50, -48, -46,
+ -44, -42, -40, -38, -36, -34, -32, -30,
+ -28, -26, -24, -22, -19, -17, -15, -13,
+ -11, -9, -7, -5, -2, 0, 1, 3,
+ 5, 7, 9, 12, 14, 16, 18, 20,
+ 22, 24, 26, 28, 31, 33, 35, 37,
+ 39, 41, 43, 45, 47, 49, 51, 53,
+ 54, 56, 58, 60, 62, 64, 66, 67,
+ 69, 71, 73, 74, 76, 78, 79, 81,
+ 83, 84, 86, 87, 89, 90, 92, 93,
+ 94, 96, 97, 98, 99, 101, 102, 103,
+ 104, 105, 106, 107, 108, 109, 110, 111, 112
+};
+
+static const int hsv_blue_y[] = {
+ -11, -13, -15, -17, -19, -21, -23, -25,
+ -27, -29, -31, -33, -35, -37, -39, -41,
+ -43, -45, -46, -48, -50, -52, -54, -55,
+ -57, -59, -61, -62, -64, -66, -67, -69,
+ -71, -72, -74, -75, -77, -78, -80, -81,
+ -83, -84, -86, -87, -88, -90, -91, -92,
+ -93, -95, -96, -97, -98, -99, -100, -101,
+ -102, -103, -104, -105, -106, -106, -107, -108,
+ -109, -109, -110, -111, -111, -112, -112, -113,
+ -113, -114, -114, -114, -115, -115, -115, -115,
+ -116, -116, -116, -116, -116, -116, -116, -116,
+ -116, -115, -115, -115, -115, -114, -114, -114,
+ -113, -113, -112, -112, -111, -111, -110, -110,
+ -109, -108, -108, -107, -106, -105, -104, -103,
+ -102, -101, -100, -99, -98, -97, -96, -95,
+ -94, -93, -91, -90, -89, -88, -86, -85,
+ -84, -82, -81, -79, -78, -76, -75, -73,
+ -71, -70, -68, -67, -65, -63, -62, -60,
+ -58, -56, -55, -53, -51, -49, -47, -45,
+ -44, -42, -40, -38, -36, -34, -32, -30,
+ -28, -26, -24, -22, -20, -18, -16, -14,
+ -12, -10, -8, -6, -4, -2, 0, 1,
+ 3, 5, 7, 9, 11, 13, 15, 17,
+ 19, 21, 23, 25, 27, 29, 31, 33,
+ 35, 37, 39, 41, 43, 45, 46, 48,
+ 50, 52, 54, 55, 57, 59, 61, 62,
+ 64, 66, 67, 69, 71, 72, 74, 75,
+ 77, 78, 80, 81, 83, 84, 86, 87,
+ 88, 90, 91, 92, 93, 95, 96, 97,
+ 98, 99, 100, 101, 102, 103, 104, 105,
+ 106, 106, 107, 108, 109, 109, 110, 111,
+ 111, 112, 112, 113, 113, 114, 114, 114,
+ 115, 115, 115, 115, 116, 116, 116, 116,
+ 116, 116, 116, 116, 116, 115, 115, 115,
+ 115, 114, 114, 114, 113, 113, 112, 112,
+ 111, 111, 110, 110, 109, 108, 108, 107,
+ 106, 105, 104, 103, 102, 101, 100, 99,
+ 98, 97, 96, 95, 94, 93, 91, 90,
+ 89, 88, 86, 85, 84, 82, 81, 79,
+ 78, 76, 75, 73, 71, 70, 68, 67,
+ 65, 63, 62, 60, 58, 56, 55, 53,
+ 51, 49, 47, 45, 44, 42, 40, 38,
+ 36, 34, 32, 30, 28, 26, 24, 22,
+ 20, 18, 16, 14, 12, 10, 8, 6,
+ 4, 2, 0, -1, -3, -5, -7, -9, -11
+};
+
+static u16 i2c_ident[] = {
+ V4L2_IDENT_OV9650,
+ V4L2_IDENT_OV9655,
+ V4L2_IDENT_SOI968,
+ V4L2_IDENT_OV7660,
+ V4L2_IDENT_OV7670,
+ V4L2_IDENT_MT9V011,
+ V4L2_IDENT_MT9V111,
+ V4L2_IDENT_MT9V112,
+ V4L2_IDENT_MT9M001C12ST,
+ V4L2_IDENT_MT9M111,
+ V4L2_IDENT_HV7131R,
+};
+
+static u16 bridge_init[][2] = {
+ {0x1000, 0x78}, {0x1001, 0x40}, {0x1002, 0x1c},
+ {0x1020, 0x80}, {0x1061, 0x01}, {0x1067, 0x40},
+ {0x1068, 0x30}, {0x1069, 0x20}, {0x106a, 0x10},
+ {0x106b, 0x08}, {0x1188, 0x87}, {0x11a1, 0x00},
+ {0x11a2, 0x00}, {0x11a3, 0x6a}, {0x11a4, 0x50},
+ {0x11ab, 0x00}, {0x11ac, 0x00}, {0x11ad, 0x50},
+ {0x11ae, 0x3c}, {0x118a, 0x04}, {0x0395, 0x04},
+ {0x11b8, 0x3a}, {0x118b, 0x0e}, {0x10f7, 0x05},
+ {0x10f8, 0x14}, {0x10fa, 0xff}, {0x10f9, 0x00},
+ {0x11ba, 0x0a}, {0x11a5, 0x2d}, {0x11a6, 0x2d},
+ {0x11a7, 0x3a}, {0x11a8, 0x05}, {0x11a9, 0x04},
+ {0x11aa, 0x3f}, {0x11af, 0x28}, {0x11b0, 0xd8},
+ {0x11b1, 0x14}, {0x11b2, 0xec}, {0x11b3, 0x32},
+ {0x11b4, 0xdd}, {0x11b5, 0x32}, {0x11b6, 0xdd},
+ {0x10e0, 0x2c}, {0x11bc, 0x40}, {0x11bd, 0x01},
+ {0x11be, 0xf0}, {0x11bf, 0x00}, {0x118c, 0x1f},
+ {0x118d, 0x1f}, {0x118e, 0x1f}, {0x118f, 0x1f},
+ {0x1180, 0x01}, {0x1181, 0x00}, {0x1182, 0x01},
+ {0x1183, 0x00}, {0x1184, 0x50}, {0x1185, 0x80}
+};
+
+/* Gain = (bit[3:0] / 16 + 1) * (bit[4] + 1) * (bit[5] + 1) * (bit[6] + 1) */
+static u8 ov_gain[] = {
+ 0x00 /* 1x */, 0x04 /* 1.25x */, 0x08 /* 1.5x */, 0x0c /* 1.75x */,
+ 0x10 /* 2x */, 0x12 /* 2.25x */, 0x14 /* 2.5x */, 0x16 /* 2.75x */,
+ 0x18 /* 3x */, 0x1a /* 3.25x */, 0x1c /* 3.5x */, 0x1e /* 3.75x */,
+ 0x30 /* 4x */, 0x31 /* 4.25x */, 0x32 /* 4.5x */, 0x33 /* 4.75x */,
+ 0x34 /* 5x */, 0x35 /* 5.25x */, 0x36 /* 5.5x */, 0x37 /* 5.75x */,
+ 0x38 /* 6x */, 0x39 /* 6.25x */, 0x3a /* 6.5x */, 0x3b /* 6.75x */,
+ 0x3c /* 7x */, 0x3d /* 7.25x */, 0x3e /* 7.5x */, 0x3f /* 7.75x */,
+ 0x70 /* 8x */
+};
+
+/* Gain = (bit[8] + 1) * (bit[7] + 1) * (bit[6:0] * 0.03125) */
+static u16 micron1_gain[] = {
+ /* 1x 1.25x 1.5x 1.75x */
+ 0x0020, 0x0028, 0x0030, 0x0038,
+ /* 2x 2.25x 2.5x 2.75x */
+ 0x00a0, 0x00a4, 0x00a8, 0x00ac,
+ /* 3x 3.25x 3.5x 3.75x */
+ 0x00b0, 0x00b4, 0x00b8, 0x00bc,
+ /* 4x 4.25x 4.5x 4.75x */
+ 0x00c0, 0x00c4, 0x00c8, 0x00cc,
+ /* 5x 5.25x 5.5x 5.75x */
+ 0x00d0, 0x00d4, 0x00d8, 0x00dc,
+ /* 6x 6.25x 6.5x 6.75x */
+ 0x00e0, 0x00e4, 0x00e8, 0x00ec,
+ /* 7x 7.25x 7.5x 7.75x */
+ 0x00f0, 0x00f4, 0x00f8, 0x00fc,
+ /* 8x */
+ 0x01c0
+};
+
+/* mt9m001 sensor uses a different gain formula then other micron sensors */
+/* Gain = (bit[6] + 1) * (bit[5-0] * 0.125) */
+static u16 micron2_gain[] = {
+ /* 1x 1.25x 1.5x 1.75x */
+ 0x0008, 0x000a, 0x000c, 0x000e,
+ /* 2x 2.25x 2.5x 2.75x */
+ 0x0010, 0x0012, 0x0014, 0x0016,
+ /* 3x 3.25x 3.5x 3.75x */
+ 0x0018, 0x001a, 0x001c, 0x001e,
+ /* 4x 4.25x 4.5x 4.75x */
+ 0x0020, 0x0051, 0x0052, 0x0053,
+ /* 5x 5.25x 5.5x 5.75x */
+ 0x0054, 0x0055, 0x0056, 0x0057,
+ /* 6x 6.25x 6.5x 6.75x */
+ 0x0058, 0x0059, 0x005a, 0x005b,
+ /* 7x 7.25x 7.5x 7.75x */
+ 0x005c, 0x005d, 0x005e, 0x005f,
+ /* 8x */
+ 0x0060
+};
+
+/* Gain = .5 + bit[7:0] / 16 */
+static u8 hv7131r_gain[] = {
+ 0x08 /* 1x */, 0x0c /* 1.25x */, 0x10 /* 1.5x */, 0x14 /* 1.75x */,
+ 0x18 /* 2x */, 0x1c /* 2.25x */, 0x20 /* 2.5x */, 0x24 /* 2.75x */,
+ 0x28 /* 3x */, 0x2c /* 3.25x */, 0x30 /* 3.5x */, 0x34 /* 3.75x */,
+ 0x38 /* 4x */, 0x3c /* 4.25x */, 0x40 /* 4.5x */, 0x44 /* 4.75x */,
+ 0x48 /* 5x */, 0x4c /* 5.25x */, 0x50 /* 5.5x */, 0x54 /* 5.75x */,
+ 0x58 /* 6x */, 0x5c /* 6.25x */, 0x60 /* 6.5x */, 0x64 /* 6.75x */,
+ 0x68 /* 7x */, 0x6c /* 7.25x */, 0x70 /* 7.5x */, 0x74 /* 7.75x */,
+ 0x78 /* 8x */
+};
+
+static u8 soi968_init[][2] = {
+ {0x12, 0x80}, {0x0c, 0x00}, {0x0f, 0x1f},
+ {0x11, 0x80}, {0x38, 0x52}, {0x1e, 0x00},
+ {0x33, 0x08}, {0x35, 0x8c}, {0x36, 0x0c},
+ {0x37, 0x04}, {0x45, 0x04}, {0x47, 0xff},
+ {0x3e, 0x00}, {0x3f, 0x00}, {0x3b, 0x20},
+ {0x3a, 0x96}, {0x3d, 0x0a}, {0x14, 0x8e},
+ {0x13, 0x8a}, {0x12, 0x40}, {0x17, 0x13},
+ {0x18, 0x63}, {0x19, 0x01}, {0x1a, 0x79},
+ {0x32, 0x24}, {0x03, 0x00}, {0x11, 0x40},
+ {0x2a, 0x10}, {0x2b, 0xe0}, {0x10, 0x32},
+ {0x00, 0x00}, {0x01, 0x80}, {0x02, 0x80},
+};
+
+static u8 ov7660_init[][2] = {
+ {0x0e, 0x80}, {0x0d, 0x08}, {0x0f, 0xc3},
+ {0x04, 0xc3}, {0x10, 0x40}, {0x11, 0x40},
+ {0x12, 0x05}, {0x13, 0xba}, {0x14, 0x2a},
+ {0x37, 0x0f}, {0x38, 0x02}, {0x39, 0x43},
+ {0x3a, 0x00}, {0x69, 0x90}, {0x2d, 0xf6},
+ {0x2e, 0x0b}, {0x01, 0x78}, {0x02, 0x50},
+};
+
+static u8 ov7670_init[][2] = {
+ {0x12, 0x80}, {0x11, 0x80}, {0x3a, 0x04}, {0x12, 0x01},
+ {0x32, 0xb6}, {0x03, 0x0a}, {0x0c, 0x00}, {0x3e, 0x00},
+ {0x70, 0x3a}, {0x71, 0x35}, {0x72, 0x11}, {0x73, 0xf0},
+ {0xa2, 0x02}, {0x13, 0xe0}, {0x00, 0x00}, {0x10, 0x00},
+ {0x0d, 0x40}, {0x14, 0x28}, {0xa5, 0x05}, {0xab, 0x07},
+ {0x24, 0x95}, {0x25, 0x33}, {0x26, 0xe3}, {0x9f, 0x75},
+ {0xa0, 0x65}, {0xa1, 0x0b}, {0xa6, 0xd8}, {0xa7, 0xd8},
+ {0xa8, 0xf0}, {0xa9, 0x90}, {0xaa, 0x94}, {0x13, 0xe5},
+ {0x0e, 0x61}, {0x0f, 0x4b}, {0x16, 0x02}, {0x1e, 0x27},
+ {0x21, 0x02}, {0x22, 0x91}, {0x29, 0x07}, {0x33, 0x0b},
+ {0x35, 0x0b}, {0x37, 0x1d}, {0x38, 0x71}, {0x39, 0x2a},
+ {0x3c, 0x78}, {0x4d, 0x40}, {0x4e, 0x20}, {0x69, 0x00},
+ {0x74, 0x19}, {0x8d, 0x4f}, {0x8e, 0x00}, {0x8f, 0x00},
+ {0x90, 0x00}, {0x91, 0x00}, {0x96, 0x00}, {0x9a, 0x80},
+ {0xb0, 0x84}, {0xb1, 0x0c}, {0xb2, 0x0e}, {0xb3, 0x82},
+ {0xb8, 0x0a}, {0x43, 0x0a}, {0x44, 0xf0}, {0x45, 0x20},
+ {0x46, 0x7d}, {0x47, 0x29}, {0x48, 0x4a}, {0x59, 0x8c},
+ {0x5a, 0xa5}, {0x5b, 0xde}, {0x5c, 0x96}, {0x5d, 0x66},
+ {0x5e, 0x10}, {0x6c, 0x0a}, {0x6d, 0x55}, {0x6e, 0x11},
+ {0x6f, 0x9e}, {0x6a, 0x40}, {0x01, 0x40}, {0x02, 0x40},
+ {0x13, 0xe7}, {0x4f, 0x6e}, {0x50, 0x70}, {0x51, 0x02},
+ {0x52, 0x1d}, {0x53, 0x56}, {0x54, 0x73}, {0x55, 0x0a},
+ {0x56, 0x55}, {0x57, 0x80}, {0x58, 0x9e}, {0x41, 0x08},
+ {0x3f, 0x02}, {0x75, 0x03}, {0x76, 0x63}, {0x4c, 0x04},
+ {0x77, 0x06}, {0x3d, 0x02}, {0x4b, 0x09}, {0xc9, 0x30},
+ {0x41, 0x08}, {0x56, 0x48}, {0x34, 0x11}, {0xa4, 0x88},
+ {0x96, 0x00}, {0x97, 0x30}, {0x98, 0x20}, {0x99, 0x30},
+ {0x9a, 0x84}, {0x9b, 0x29}, {0x9c, 0x03}, {0x9d, 0x99},
+ {0x9e, 0x7f}, {0x78, 0x04}, {0x79, 0x01}, {0xc8, 0xf0},
+ {0x79, 0x0f}, {0xc8, 0x00}, {0x79, 0x10}, {0xc8, 0x7e},
+ {0x79, 0x0a}, {0xc8, 0x80}, {0x79, 0x0b}, {0xc8, 0x01},
+ {0x79, 0x0c}, {0xc8, 0x0f}, {0x79, 0x0d}, {0xc8, 0x20},
+ {0x79, 0x09}, {0xc8, 0x80}, {0x79, 0x02}, {0xc8, 0xc0},
+ {0x79, 0x03}, {0xc8, 0x40}, {0x79, 0x05}, {0xc8, 0x30},
+ {0x79, 0x26}, {0x62, 0x20}, {0x63, 0x00}, {0x64, 0x06},
+ {0x65, 0x00}, {0x66, 0x05}, {0x94, 0x05}, {0x95, 0x0a},
+ {0x17, 0x13}, {0x18, 0x01}, {0x19, 0x02}, {0x1a, 0x7a},
+ {0x46, 0x59}, {0x47, 0x30}, {0x58, 0x9a}, {0x59, 0x84},
+ {0x5a, 0x91}, {0x5b, 0x57}, {0x5c, 0x75}, {0x5d, 0x6d},
+ {0x5e, 0x13}, {0x64, 0x07}, {0x94, 0x07}, {0x95, 0x0d},
+ {0xa6, 0xdf}, {0xa7, 0xdf}, {0x48, 0x4d}, {0x51, 0x00},
+ {0x6b, 0x0a}, {0x11, 0x80}, {0x2a, 0x00}, {0x2b, 0x00},
+ {0x92, 0x00}, {0x93, 0x00}, {0x55, 0x0a}, {0x56, 0x60},
+ {0x4f, 0x6e}, {0x50, 0x70}, {0x51, 0x00}, {0x52, 0x1d},
+ {0x53, 0x56}, {0x54, 0x73}, {0x58, 0x9a}, {0x4f, 0x6e},
+ {0x50, 0x70}, {0x51, 0x00}, {0x52, 0x1d}, {0x53, 0x56},
+ {0x54, 0x73}, {0x58, 0x9a}, {0x3f, 0x01}, {0x7b, 0x03},
+ {0x7c, 0x09}, {0x7d, 0x16}, {0x7e, 0x38}, {0x7f, 0x47},
+ {0x80, 0x53}, {0x81, 0x5e}, {0x82, 0x6a}, {0x83, 0x74},
+ {0x84, 0x80}, {0x85, 0x8c}, {0x86, 0x9b}, {0x87, 0xb2},
+ {0x88, 0xcc}, {0x89, 0xe5}, {0x7a, 0x24}, {0x3b, 0x00},
+ {0x9f, 0x76}, {0xa0, 0x65}, {0x13, 0xe2}, {0x6b, 0x0a},
+ {0x11, 0x80}, {0x2a, 0x00}, {0x2b, 0x00}, {0x92, 0x00},
+ {0x93, 0x00},
+};
+
+static u8 ov9650_init[][2] = {
+ {0x12, 0x80}, {0x00, 0x00}, {0x01, 0x78},
+ {0x02, 0x78}, {0x03, 0x36}, {0x04, 0x03},
+ {0x05, 0x00}, {0x06, 0x00}, {0x08, 0x00},
+ {0x09, 0x01}, {0x0c, 0x00}, {0x0d, 0x00},
+ {0x0e, 0xa0}, {0x0f, 0x52}, {0x10, 0x7c},
+ {0x11, 0x80}, {0x12, 0x45}, {0x13, 0xc2},
+ {0x14, 0x2e}, {0x15, 0x00}, {0x16, 0x07},
+ {0x17, 0x24}, {0x18, 0xc5}, {0x19, 0x00},
+ {0x1a, 0x3c}, {0x1b, 0x00}, {0x1e, 0x04},
+ {0x1f, 0x00}, {0x24, 0x78}, {0x25, 0x68},
+ {0x26, 0xd4}, {0x27, 0x80}, {0x28, 0x80},
+ {0x29, 0x30}, {0x2a, 0x00}, {0x2b, 0x00},
+ {0x2c, 0x80}, {0x2d, 0x00}, {0x2e, 0x00},
+ {0x2f, 0x00}, {0x30, 0x08}, {0x31, 0x30},
+ {0x32, 0x84}, {0x33, 0xe2}, {0x34, 0xbf},
+ {0x35, 0x81}, {0x36, 0xf9}, {0x37, 0x00},
+ {0x38, 0x93}, {0x39, 0x50}, {0x3a, 0x01},
+ {0x3b, 0x01}, {0x3c, 0x73}, {0x3d, 0x19},
+ {0x3e, 0x0b}, {0x3f, 0x80}, {0x40, 0xc1},
+ {0x41, 0x00}, {0x42, 0x08}, {0x67, 0x80},
+ {0x68, 0x80}, {0x69, 0x40}, {0x6a, 0x00},
+ {0x6b, 0x0a}, {0x8b, 0x06}, {0x8c, 0x20},
+ {0x8d, 0x00}, {0x8e, 0x00}, {0x8f, 0xdf},
+ {0x92, 0x00}, {0x93, 0x00}, {0x94, 0x88},
+ {0x95, 0x88}, {0x96, 0x04}, {0xa1, 0x00},
+ {0xa5, 0x80}, {0xa8, 0x80}, {0xa9, 0xb8},
+ {0xaa, 0x92}, {0xab, 0x0a},
+};
+
+static u8 ov9655_init[][2] = {
+ {0x12, 0x80}, {0x12, 0x01}, {0x0d, 0x00}, {0x0e, 0x61},
+ {0x11, 0x80}, {0x13, 0xba}, {0x14, 0x2e}, {0x16, 0x24},
+ {0x1e, 0x04}, {0x1e, 0x04}, {0x1e, 0x04}, {0x27, 0x08},
+ {0x28, 0x08}, {0x29, 0x15}, {0x2c, 0x08}, {0x32, 0xbf},
+ {0x34, 0x3d}, {0x35, 0x00}, {0x36, 0xf8}, {0x38, 0x12},
+ {0x39, 0x57}, {0x3a, 0x00}, {0x3b, 0xcc}, {0x3c, 0x0c},
+ {0x3d, 0x19}, {0x3e, 0x0c}, {0x3f, 0x01}, {0x41, 0x40},
+ {0x42, 0x80}, {0x45, 0x46}, {0x46, 0x62}, {0x47, 0x2a},
+ {0x48, 0x3c}, {0x4a, 0xf0}, {0x4b, 0xdc}, {0x4c, 0xdc},
+ {0x4d, 0xdc}, {0x4e, 0xdc}, {0x69, 0x02}, {0x6c, 0x04},
+ {0x6f, 0x9e}, {0x70, 0x05}, {0x71, 0x78}, {0x77, 0x02},
+ {0x8a, 0x23}, {0x8c, 0x0d}, {0x90, 0x7e}, {0x91, 0x7c},
+ {0x9f, 0x6e}, {0xa0, 0x6e}, {0xa5, 0x68}, {0xa6, 0x60},
+ {0xa8, 0xc1}, {0xa9, 0xfa}, {0xaa, 0x92}, {0xab, 0x04},
+ {0xac, 0x80}, {0xad, 0x80}, {0xae, 0x80}, {0xaf, 0x80},
+ {0xb2, 0xf2}, {0xb3, 0x20}, {0xb5, 0x00}, {0xb6, 0xaf},
+ {0xbb, 0xae}, {0xbc, 0x44}, {0xbd, 0x44}, {0xbe, 0x3b},
+ {0xbf, 0x3a}, {0xc0, 0xe2}, {0xc1, 0xc8}, {0xc2, 0x01},
+ {0xc4, 0x00}, {0xc6, 0x85}, {0xc7, 0x81}, {0xc9, 0xe0},
+ {0xca, 0xe8}, {0xcc, 0xd8}, {0xcd, 0x93}, {0x12, 0x61},
+ {0x36, 0xfa}, {0x8c, 0x8d}, {0xc0, 0xaa}, {0x69, 0x0a},
+ {0x03, 0x12}, {0x17, 0x14}, {0x18, 0x00}, {0x19, 0x01},
+ {0x1a, 0x3d}, {0x32, 0xbf}, {0x11, 0x80}, {0x2a, 0x10},
+ {0x2b, 0x0a}, {0x92, 0x00}, {0x93, 0x00}, {0x1e, 0x04},
+ {0x1e, 0x04}, {0x10, 0x7c}, {0x04, 0x03}, {0xa1, 0x00},
+ {0x2d, 0x00}, {0x2e, 0x00}, {0x00, 0x00}, {0x01, 0x80},
+ {0x02, 0x80}, {0x12, 0x61}, {0x36, 0xfa}, {0x8c, 0x8d},
+ {0xc0, 0xaa}, {0x69, 0x0a}, {0x03, 0x12}, {0x17, 0x14},
+ {0x18, 0x00}, {0x19, 0x01}, {0x1a, 0x3d}, {0x32, 0xbf},
+ {0x11, 0x80}, {0x2a, 0x10}, {0x2b, 0x0a}, {0x92, 0x00},
+ {0x93, 0x00}, {0x04, 0x01}, {0x10, 0x1f}, {0xa1, 0x00},
+ {0x00, 0x0a}, {0xa1, 0x00}, {0x10, 0x5d}, {0x04, 0x03},
+ {0x00, 0x01}, {0xa1, 0x00}, {0x10, 0x7c}, {0x04, 0x03},
+ {0x00, 0x03}, {0x00, 0x0a}, {0x00, 0x10}, {0x00, 0x13},
+};
+
+static u16 mt9v112_init[][2] = {
+ {0xf0, 0x0000}, {0x0d, 0x0021}, {0x0d, 0x0020},
+ {0x34, 0xc019}, {0x0a, 0x0011}, {0x0b, 0x000b},
+ {0x20, 0x0703}, {0x35, 0x2022}, {0xf0, 0x0001},
+ {0x05, 0x0000}, {0x06, 0x340c}, {0x3b, 0x042a},
+ {0x3c, 0x0400}, {0xf0, 0x0002}, {0x2e, 0x0c58},
+ {0x5b, 0x0001}, {0xc8, 0x9f0b}, {0xf0, 0x0001},
+ {0x9b, 0x5300}, {0xf0, 0x0000}, {0x2b, 0x0020},
+ {0x2c, 0x002a}, {0x2d, 0x0032}, {0x2e, 0x0020},
+ {0x09, 0x01dc}, {0x01, 0x000c}, {0x02, 0x0020},
+ {0x03, 0x01e0}, {0x04, 0x0280}, {0x06, 0x000c},
+ {0x05, 0x0098}, {0x20, 0x0703}, {0x09, 0x01f2},
+ {0x2b, 0x00a0}, {0x2c, 0x00a0}, {0x2d, 0x00a0},
+ {0x2e, 0x00a0}, {0x01, 0x000c}, {0x02, 0x0020},
+ {0x03, 0x01e0}, {0x04, 0x0280}, {0x06, 0x000c},
+ {0x05, 0x0098}, {0x09, 0x01c1}, {0x2b, 0x00ae},
+ {0x2c, 0x00ae}, {0x2d, 0x00ae}, {0x2e, 0x00ae},
+};
+
+static u16 mt9v111_init[][2] = {
+ {0x01, 0x0004}, {0x0d, 0x0001}, {0x0d, 0x0000},
+ {0x01, 0x0001}, {0x02, 0x0016}, {0x03, 0x01e1},
+ {0x04, 0x0281}, {0x05, 0x0004}, {0x07, 0x3002},
+ {0x21, 0x0000}, {0x25, 0x4024}, {0x26, 0xff03},
+ {0x27, 0xff10}, {0x2b, 0x7828}, {0x2c, 0xb43c},
+ {0x2d, 0xf0a0}, {0x2e, 0x0c64}, {0x2f, 0x0064},
+ {0x67, 0x4010}, {0x06, 0x301e}, {0x08, 0x0480},
+ {0x01, 0x0004}, {0x02, 0x0016}, {0x03, 0x01e6},
+ {0x04, 0x0286}, {0x05, 0x0004}, {0x06, 0x0000},
+ {0x07, 0x3002}, {0x08, 0x0008}, {0x0c, 0x0000},
+ {0x0d, 0x0000}, {0x0e, 0x0000}, {0x0f, 0x0000},
+ {0x10, 0x0000}, {0x11, 0x0000}, {0x12, 0x00b0},
+ {0x13, 0x007c}, {0x14, 0x0000}, {0x15, 0x0000},
+ {0x16, 0x0000}, {0x17, 0x0000}, {0x18, 0x0000},
+ {0x19, 0x0000}, {0x1a, 0x0000}, {0x1b, 0x0000},
+ {0x1c, 0x0000}, {0x1d, 0x0000}, {0x30, 0x0000},
+ {0x30, 0x0005}, {0x31, 0x0000}, {0x02, 0x0016},
+ {0x03, 0x01e1}, {0x04, 0x0281}, {0x05, 0x0004},
+ {0x06, 0x0000}, {0x07, 0x3002}, {0x06, 0x002d},
+ {0x05, 0x0004}, {0x09, 0x0064}, {0x2b, 0x00a0},
+ {0x2c, 0x00a0}, {0x2d, 0x00a0}, {0x2e, 0x00a0},
+ {0x02, 0x0016}, {0x03, 0x01e1}, {0x04, 0x0281},
+ {0x05, 0x0004}, {0x06, 0x002d}, {0x07, 0x3002},
+ {0x0e, 0x0008}, {0x06, 0x002d}, {0x05, 0x0004},
+};
+
+static u16 mt9v011_init[][2] = {
+ {0x07, 0x0002}, {0x0d, 0x0001}, {0x0d, 0x0000},
+ {0x01, 0x0008}, {0x02, 0x0016}, {0x03, 0x01e1},
+ {0x04, 0x0281}, {0x05, 0x0083}, {0x06, 0x0006},
+ {0x0d, 0x0002}, {0x0a, 0x0000}, {0x0b, 0x0000},
+ {0x0c, 0x0000}, {0x0d, 0x0000}, {0x0e, 0x0000},
+ {0x0f, 0x0000}, {0x10, 0x0000}, {0x11, 0x0000},
+ {0x12, 0x0000}, {0x13, 0x0000}, {0x14, 0x0000},
+ {0x15, 0x0000}, {0x16, 0x0000}, {0x17, 0x0000},
+ {0x18, 0x0000}, {0x19, 0x0000}, {0x1a, 0x0000},
+ {0x1b, 0x0000}, {0x1c, 0x0000}, {0x1d, 0x0000},
+ {0x32, 0x0000}, {0x20, 0x1101}, {0x21, 0x0000},
+ {0x22, 0x0000}, {0x23, 0x0000}, {0x24, 0x0000},
+ {0x25, 0x0000}, {0x26, 0x0000}, {0x27, 0x0024},
+ {0x2f, 0xf7b0}, {0x30, 0x0005}, {0x31, 0x0000},
+ {0x32, 0x0000}, {0x33, 0x0000}, {0x34, 0x0100},
+ {0x3d, 0x068f}, {0x40, 0x01e0}, {0x41, 0x00d1},
+ {0x44, 0x0082}, {0x5a, 0x0000}, {0x5b, 0x0000},
+ {0x5c, 0x0000}, {0x5d, 0x0000}, {0x5e, 0x0000},
+ {0x5f, 0xa31d}, {0x62, 0x0611}, {0x0a, 0x0000},
+ {0x06, 0x0029}, {0x05, 0x0009}, {0x20, 0x1101},
+ {0x20, 0x1101}, {0x09, 0x0064}, {0x07, 0x0003},
+ {0x2b, 0x0033}, {0x2c, 0x00a0}, {0x2d, 0x00a0},
+ {0x2e, 0x0033}, {0x07, 0x0002}, {0x06, 0x0000},
+ {0x06, 0x0029}, {0x05, 0x0009},
+};
+
+static u16 mt9m001_init[][2] = {
+ {0x0d, 0x0001}, {0x0d, 0x0000}, {0x01, 0x000e},
+ {0x02, 0x0014}, {0x03, 0x03c1}, {0x04, 0x0501},
+ {0x05, 0x0083}, {0x06, 0x0006}, {0x0d, 0x0002},
+ {0x0a, 0x0000}, {0x0c, 0x0000}, {0x11, 0x0000},
+ {0x1e, 0x8000}, {0x5f, 0x8904}, {0x60, 0x0000},
+ {0x61, 0x0000}, {0x62, 0x0498}, {0x63, 0x0000},
+ {0x64, 0x0000}, {0x20, 0x111d}, {0x06, 0x00f2},
+ {0x05, 0x0013}, {0x09, 0x10f2}, {0x07, 0x0003},
+ {0x2b, 0x002a}, {0x2d, 0x002a}, {0x2c, 0x002a},
+ {0x2e, 0x0029}, {0x07, 0x0002},
+};
+
+static u16 mt9m111_init[][2] = {
+ {0xf0, 0x0000}, {0x0d, 0x0008}, {0x0d, 0x0009},
+ {0x0d, 0x0008}, {0xf0, 0x0001}, {0x3a, 0x4300},
+ {0x9b, 0x4300}, {0xa1, 0x0280}, {0xa4, 0x0200},
+ {0x06, 0x308e}, {0xf0, 0x0000},
+};
+
+static u8 hv7131r_init[][2] = {
+ {0x02, 0x08}, {0x02, 0x00}, {0x01, 0x08},
+ {0x02, 0x00}, {0x20, 0x00}, {0x21, 0xd0},
+ {0x22, 0x00}, {0x23, 0x09}, {0x01, 0x08},
+ {0x01, 0x08}, {0x01, 0x08}, {0x25, 0x07},
+ {0x26, 0xc3}, {0x27, 0x50}, {0x30, 0x62},
+ {0x31, 0x10}, {0x32, 0x06}, {0x33, 0x10},
+ {0x20, 0x00}, {0x21, 0xd0}, {0x22, 0x00},
+ {0x23, 0x09}, {0x01, 0x08},
+};
+
+int reg_r(struct gspca_dev *gspca_dev, u16 reg, u16 length)
+{
+ struct usb_device *dev = gspca_dev->dev;
+ int result;
+ result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+ 0x00,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
+ reg,
+ 0x00,
+ gspca_dev->usb_buf,
+ length,
+ 500);
+ if (unlikely(result < 0 || result != length)) {
+ err("Read register failed 0x%02X", reg);
+ return -EIO;
+ }
+ return 0;
+}
+
+int reg_w(struct gspca_dev *gspca_dev, u16 reg, const u8 *buffer, int length)
+{
+ struct usb_device *dev = gspca_dev->dev;
+ int result;
+ memcpy(gspca_dev->usb_buf, buffer, length);
+ result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+ 0x08,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
+ reg,
+ 0x00,
+ gspca_dev->usb_buf,
+ length,
+ 500);
+ if (unlikely(result < 0 || result != length)) {
+ err("Write register failed index 0x%02X", reg);
+ return -EIO;
+ }
+ return 0;
+}
+
+int reg_w1(struct gspca_dev *gspca_dev, u16 reg, const u8 value)
+{
+ u8 data[1] = {value};
+ return reg_w(gspca_dev, reg, data, 1);
+}
+
+int i2c_w(struct gspca_dev *gspca_dev, const u8 *buffer)
+{
+ int i;
+ reg_w(gspca_dev, 0x10c0, buffer, 8);
+ for (i = 0; i < 5; i++) {
+ reg_r(gspca_dev, 0x10c0, 1);
+ if (gspca_dev->usb_buf[0] & 0x04) {
+ if (gspca_dev->usb_buf[0] & 0x08)
+ return -1;
+ return 0;
+ }
+ msleep(1);
+ }
+ return -1;
+}
+
+int i2c_w1(struct gspca_dev *gspca_dev, u8 reg, u8 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ u8 row[8];
+
+ /*
+ * from the point of view of the bridge, the length
+ * includes the address
+ */
+ row[0] = 0x81 | (2 << 4);
+ row[1] = sd->i2c_addr;
+ row[2] = reg;
+ row[3] = val;
+ row[4] = 0x00;
+ row[5] = 0x00;
+ row[6] = 0x00;
+ row[7] = 0x10;
+
+ return i2c_w(gspca_dev, row);
+}
+
+int i2c_w2(struct gspca_dev *gspca_dev, u8 reg, u16 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ u8 row[8];
+
+ /*
+ * from the point of view of the bridge, the length
+ * includes the address
+ */
+ row[0] = 0x81 | (3 << 4);
+ row[1] = sd->i2c_addr;
+ row[2] = reg;
+ row[3] = (val >> 8) & 0xff;
+ row[4] = val & 0xff;
+ row[5] = 0x00;
+ row[6] = 0x00;
+ row[7] = 0x10;
+
+ return i2c_w(gspca_dev, row);
+}
+
+int i2c_r1(struct gspca_dev *gspca_dev, u8 reg, u8 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ u8 row[8];
+
+ row[0] = 0x81 | 0x10;
+ row[1] = sd->i2c_addr;
+ row[2] = reg;
+ row[3] = 0;
+ row[4] = 0;
+ row[5] = 0;
+ row[6] = 0;
+ row[7] = 0x10;
+ reg_w(gspca_dev, 0x10c0, row, 8);
+ msleep(1);
+ row[0] = 0x81 | (2 << 4) | 0x02;
+ row[2] = 0;
+ reg_w(gspca_dev, 0x10c0, row, 8);
+ msleep(1);
+ reg_r(gspca_dev, 0x10c2, 5);
+ *val = gspca_dev->usb_buf[3];
+ return 0;
+}
+
+int i2c_r2(struct gspca_dev *gspca_dev, u8 reg, u16 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ u8 row[8];
+
+ row[0] = 0x81 | 0x10;
+ row[1] = sd->i2c_addr;
+ row[2] = reg;
+ row[3] = 0;
+ row[4] = 0;
+ row[5] = 0;
+ row[6] = 0;
+ row[7] = 0x10;
+ reg_w(gspca_dev, 0x10c0, row, 8);
+ msleep(1);
+ row[0] = 0x81 | (3 << 4) | 0x02;
+ row[2] = 0;
+ reg_w(gspca_dev, 0x10c0, row, 8);
+ msleep(1);
+ reg_r(gspca_dev, 0x10c2, 5);
+ *val = (gspca_dev->usb_buf[2] << 8) | gspca_dev->usb_buf[3];
+ return 0;
+}
+
+static int ov9650_init_sensor(struct gspca_dev *gspca_dev)
+{
+ int i;
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ for (i = 0; i < ARRAY_SIZE(ov9650_init); i++) {
+ if (i2c_w1(gspca_dev, ov9650_init[i][0],
+ ov9650_init[i][1]) < 0) {
+ err("OV9650 sensor initialization failed");
+ return -ENODEV;
+ }
+ }
+ sd->hstart = 1;
+ sd->vstart = 7;
+ return 0;
+}
+
+static int ov9655_init_sensor(struct gspca_dev *gspca_dev)
+{
+ int i;
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ for (i = 0; i < ARRAY_SIZE(ov9655_init); i++) {
+ if (i2c_w1(gspca_dev, ov9655_init[i][0],
+ ov9655_init[i][1]) < 0) {
+ err("OV9655 sensor initialization failed");
+ return -ENODEV;
+ }
+ }
+ /* disable hflip and vflip */
+ gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX);
+ sd->hstart = 0;
+ sd->vstart = 7;
+ return 0;
+}
+
+static int soi968_init_sensor(struct gspca_dev *gspca_dev)
+{
+ int i;
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ for (i = 0; i < ARRAY_SIZE(soi968_init); i++) {
+ if (i2c_w1(gspca_dev, soi968_init[i][0],
+ soi968_init[i][1]) < 0) {
+ err("SOI968 sensor initialization failed");
+ return -ENODEV;
+ }
+ }
+ /* disable hflip and vflip */
+ gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX);
+ sd->hstart = 60;
+ sd->vstart = 11;
+ return 0;
+}
+
+static int ov7660_init_sensor(struct gspca_dev *gspca_dev)
+{
+ int i;
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ for (i = 0; i < ARRAY_SIZE(ov7660_init); i++) {
+ if (i2c_w1(gspca_dev, ov7660_init[i][0],
+ ov7660_init[i][1]) < 0) {
+ err("OV7660 sensor initialization failed");
+ return -ENODEV;
+ }
+ }
+ /* disable hflip and vflip */
+ gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX);
+ sd->hstart = 1;
+ sd->vstart = 1;
+ return 0;
+}
+
+static int ov7670_init_sensor(struct gspca_dev *gspca_dev)
+{
+ int i;
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ for (i = 0; i < ARRAY_SIZE(ov7670_init); i++) {
+ if (i2c_w1(gspca_dev, ov7670_init[i][0],
+ ov7670_init[i][1]) < 0) {
+ err("OV7670 sensor initialization failed");
+ return -ENODEV;
+ }
+ }
+ /* disable hflip and vflip */
+ gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX);
+ sd->hstart = 0;
+ sd->vstart = 1;
+ return 0;
+}
+
+static int mt9v_init_sensor(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int i;
+ u16 value;
+ int ret;
+
+ sd->i2c_addr = 0x5d;
+ ret = i2c_r2(gspca_dev, 0xff, &value);
+ if ((ret == 0) && (value == 0x8243)) {
+ for (i = 0; i < ARRAY_SIZE(mt9v011_init); i++) {
+ if (i2c_w2(gspca_dev, mt9v011_init[i][0],
+ mt9v011_init[i][1]) < 0) {
+ err("MT9V011 sensor initialization failed");
+ return -ENODEV;
+ }
+ }
+ sd->hstart = 2;
+ sd->vstart = 2;
+ sd->sensor = SENSOR_MT9V011;
+ info("MT9V011 sensor detected");
+ return 0;
+ }
+
+ sd->i2c_addr = 0x5c;
+ i2c_w2(gspca_dev, 0x01, 0x0004);
+ ret = i2c_r2(gspca_dev, 0xff, &value);
+ if ((ret == 0) && (value == 0x823a)) {
+ for (i = 0; i < ARRAY_SIZE(mt9v111_init); i++) {
+ if (i2c_w2(gspca_dev, mt9v111_init[i][0],
+ mt9v111_init[i][1]) < 0) {
+ err("MT9V111 sensor initialization failed");
+ return -ENODEV;
+ }
+ }
+ sd->hstart = 2;
+ sd->vstart = 2;
+ sd->sensor = SENSOR_MT9V111;
+ info("MT9V111 sensor detected");
+ return 0;
+ }
+
+ sd->i2c_addr = 0x5d;
+ ret = i2c_w2(gspca_dev, 0xf0, 0x0000);
+ if (ret < 0) {
+ sd->i2c_addr = 0x48;
+ i2c_w2(gspca_dev, 0xf0, 0x0000);
+ }
+ ret = i2c_r2(gspca_dev, 0x00, &value);
+ if ((ret == 0) && (value == 0x1229)) {
+ for (i = 0; i < ARRAY_SIZE(mt9v112_init); i++) {
+ if (i2c_w2(gspca_dev, mt9v112_init[i][0],
+ mt9v112_init[i][1]) < 0) {
+ err("MT9V112 sensor initialization failed");
+ return -ENODEV;
+ }
+ }
+ sd->hstart = 6;
+ sd->vstart = 2;
+ sd->sensor = SENSOR_MT9V112;
+ info("MT9V112 sensor detected");
+ return 0;
+ }
+
+ return -ENODEV;
+}
+
+static int mt9m111_init_sensor(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int i;
+ for (i = 0; i < ARRAY_SIZE(mt9m111_init); i++) {
+ if (i2c_w2(gspca_dev, mt9m111_init[i][0],
+ mt9m111_init[i][1]) < 0) {
+ err("MT9M111 sensor initialization failed");
+ return -ENODEV;
+ }
+ }
+ sd->hstart = 0;
+ sd->vstart = 2;
+ return 0;
+}
+
+static int mt9m001_init_sensor(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int i;
+ for (i = 0; i < ARRAY_SIZE(mt9m001_init); i++) {
+ if (i2c_w2(gspca_dev, mt9m001_init[i][0],
+ mt9m001_init[i][1]) < 0) {
+ err("MT9M001 sensor initialization failed");
+ return -ENODEV;
+ }
+ }
+ /* disable hflip and vflip */
+ gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX);
+ sd->hstart = 2;
+ sd->vstart = 2;
+ return 0;
+}
+
+static int hv7131r_init_sensor(struct gspca_dev *gspca_dev)
+{
+ int i;
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ for (i = 0; i < ARRAY_SIZE(hv7131r_init); i++) {
+ if (i2c_w1(gspca_dev, hv7131r_init[i][0],
+ hv7131r_init[i][1]) < 0) {
+ err("HV7131R Sensor initialization failed");
+ return -ENODEV;
+ }
+ }
+ sd->hstart = 0;
+ sd->vstart = 1;
+ return 0;
+}
+
+#ifdef CONFIG_USB_GSPCA_SN9C20X_EVDEV
+static int input_kthread(void *data)
+{
+ struct gspca_dev *gspca_dev = (struct gspca_dev *)data;
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ DECLARE_WAIT_QUEUE_HEAD(wait);
+ set_freezable();
+ for (;;) {
+ if (kthread_should_stop())
+ break;
+
+ if (reg_r(gspca_dev, 0x1005, 1) < 0)
+ continue;
+
+ input_report_key(sd->input_dev,
+ KEY_CAMERA,
+ gspca_dev->usb_buf[0] & sd->input_gpio);
+ input_sync(sd->input_dev);
+
+ wait_event_freezable_timeout(wait,
+ kthread_should_stop(),
+ msecs_to_jiffies(100));
+ }
+ return 0;
+}
+
+
+static int sn9c20x_input_init(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ if (sd->input_gpio == 0)
+ return 0;
+
+ sd->input_dev = input_allocate_device();
+ if (!sd->input_dev)
+ return -ENOMEM;
+
+ sd->input_dev->name = "SN9C20X Webcam";
+
+ sd->input_dev->phys = kasprintf(GFP_KERNEL, "usb-%s-%s",
+ gspca_dev->dev->bus->bus_name,
+ gspca_dev->dev->devpath);
+
+ if (!sd->input_dev->phys)
+ return -ENOMEM;
+
+ usb_to_input_id(gspca_dev->dev, &sd->input_dev->id);
+ sd->input_dev->dev.parent = &gspca_dev->dev->dev;
+
+ set_bit(EV_KEY, sd->input_dev->evbit);
+ set_bit(KEY_CAMERA, sd->input_dev->keybit);
+
+ if (input_register_device(sd->input_dev))
+ return -EINVAL;
+
+ sd->input_task = kthread_run(input_kthread, gspca_dev, "sn9c20x/%d",
+ gspca_dev->vdev.minor);
+
+ if (IS_ERR(sd->input_task))
+ return -EINVAL;
+
+ return 0;
+}
+
+static void sn9c20x_input_cleanup(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ if (sd->input_task != NULL && !IS_ERR(sd->input_task))
+ kthread_stop(sd->input_task);
+
+ if (sd->input_dev != NULL) {
+ input_unregister_device(sd->input_dev);
+ kfree(sd->input_dev->phys);
+ input_free_device(sd->input_dev);
+ sd->input_dev = NULL;
+ }
+}
+#endif
+
+static int set_cmatrix(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ s32 hue_coord, hue_index = 180 + sd->hue;
+ u8 cmatrix[21];
+ memset(cmatrix, 0, 21);
+
+ cmatrix[2] = (sd->contrast * 0x25 / 0x100) + 0x26;
+ cmatrix[0] = 0x13 + (cmatrix[2] - 0x26) * 0x13 / 0x25;
+ cmatrix[4] = 0x07 + (cmatrix[2] - 0x26) * 0x07 / 0x25;
+ cmatrix[18] = sd->brightness - 0x80;
+
+ hue_coord = (hsv_red_x[hue_index] * sd->saturation) >> 8;
+ cmatrix[6] = (unsigned char)(hue_coord & 0xff);
+ cmatrix[7] = (unsigned char)((hue_coord >> 8) & 0x0f);
+
+ hue_coord = (hsv_red_y[hue_index] * sd->saturation) >> 8;
+ cmatrix[8] = (unsigned char)(hue_coord & 0xff);
+ cmatrix[9] = (unsigned char)((hue_coord >> 8) & 0x0f);
+
+ hue_coord = (hsv_green_x[hue_index] * sd->saturation) >> 8;
+ cmatrix[10] = (unsigned char)(hue_coord & 0xff);
+ cmatrix[11] = (unsigned char)((hue_coord >> 8) & 0x0f);
+
+ hue_coord = (hsv_green_y[hue_index] * sd->saturation) >> 8;
+ cmatrix[12] = (unsigned char)(hue_coord & 0xff);
+ cmatrix[13] = (unsigned char)((hue_coord >> 8) & 0x0f);
+
+ hue_coord = (hsv_blue_x[hue_index] * sd->saturation) >> 8;
+ cmatrix[14] = (unsigned char)(hue_coord & 0xff);
+ cmatrix[15] = (unsigned char)((hue_coord >> 8) & 0x0f);
+
+ hue_coord = (hsv_blue_y[hue_index] * sd->saturation) >> 8;
+ cmatrix[16] = (unsigned char)(hue_coord & 0xff);
+ cmatrix[17] = (unsigned char)((hue_coord >> 8) & 0x0f);
+
+ return reg_w(gspca_dev, 0x10e1, cmatrix, 21);
+}
+
+static int set_gamma(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ u8 gamma[17];
+ u8 gval = sd->gamma * 0xb8 / 0x100;
+
+
+ gamma[0] = 0x0a;
+ gamma[1] = 0x13 + (gval * (0xcb - 0x13) / 0xb8);
+ gamma[2] = 0x25 + (gval * (0xee - 0x25) / 0xb8);
+ gamma[3] = 0x37 + (gval * (0xfa - 0x37) / 0xb8);
+ gamma[4] = 0x45 + (gval * (0xfc - 0x45) / 0xb8);
+ gamma[5] = 0x55 + (gval * (0xfb - 0x55) / 0xb8);
+ gamma[6] = 0x65 + (gval * (0xfc - 0x65) / 0xb8);
+ gamma[7] = 0x74 + (gval * (0xfd - 0x74) / 0xb8);
+ gamma[8] = 0x83 + (gval * (0xfe - 0x83) / 0xb8);
+ gamma[9] = 0x92 + (gval * (0xfc - 0x92) / 0xb8);
+ gamma[10] = 0xa1 + (gval * (0xfc - 0xa1) / 0xb8);
+ gamma[11] = 0xb0 + (gval * (0xfc - 0xb0) / 0xb8);
+ gamma[12] = 0xbf + (gval * (0xfb - 0xbf) / 0xb8);
+ gamma[13] = 0xce + (gval * (0xfb - 0xce) / 0xb8);
+ gamma[14] = 0xdf + (gval * (0xfd - 0xdf) / 0xb8);
+ gamma[15] = 0xea + (gval * (0xf9 - 0xea) / 0xb8);
+ gamma[16] = 0xf5;
+
+ return reg_w(gspca_dev, 0x1190, gamma, 17);
+}
+
+static int set_redblue(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ reg_w1(gspca_dev, 0x118c, sd->red);
+ reg_w1(gspca_dev, 0x118f, sd->blue);
+ return 0;
+}
+
+static int set_hvflip(struct gspca_dev *gspca_dev)
+{
+ u8 value, tslb;
+ u16 value2;
+ struct sd *sd = (struct sd *) gspca_dev;
+ switch (sd->sensor) {
+ case SENSOR_OV9650:
+ i2c_r1(gspca_dev, 0x1e, &value);
+ value &= ~0x30;
+ tslb = 0x01;
+ if (sd->hflip)
+ value |= 0x20;
+ if (sd->vflip) {
+ value |= 0x10;
+ tslb = 0x49;
+ }
+ i2c_w1(gspca_dev, 0x1e, value);
+ i2c_w1(gspca_dev, 0x3a, tslb);
+ break;
+ case SENSOR_MT9V111:
+ case SENSOR_MT9V011:
+ i2c_r2(gspca_dev, 0x20, &value2);
+ value2 &= ~0xc0a0;
+ if (sd->hflip)
+ value2 |= 0x8080;
+ if (sd->vflip)
+ value2 |= 0x4020;
+ i2c_w2(gspca_dev, 0x20, value2);
+ break;
+ case SENSOR_MT9M111:
+ case SENSOR_MT9V112:
+ i2c_r2(gspca_dev, 0x20, &value2);
+ value2 &= ~0x0003;
+ if (sd->hflip)
+ value2 |= 0x0002;
+ if (sd->vflip)
+ value2 |= 0x0001;
+ i2c_w2(gspca_dev, 0x20, value2);
+ break;
+ case SENSOR_HV7131R:
+ i2c_r1(gspca_dev, 0x01, &value);
+ value &= ~0x03;
+ if (sd->vflip)
+ value |= 0x01;
+ if (sd->hflip)
+ value |= 0x02;
+ i2c_w1(gspca_dev, 0x01, value);
+ break;
+ }
+ return 0;
+}
+
+static int set_exposure(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ u8 exp[8] = {0x81, sd->i2c_addr, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e};
+ switch (sd->sensor) {
+ case SENSOR_OV7660:
+ case SENSOR_OV7670:
+ case SENSOR_SOI968:
+ case SENSOR_OV9655:
+ case SENSOR_OV9650:
+ exp[0] |= (3 << 4);
+ exp[2] = 0x2d;
+ exp[3] = sd->exposure & 0xff;
+ exp[4] = sd->exposure >> 8;
+ break;
+ case SENSOR_MT9M001:
+ case SENSOR_MT9M111:
+ case SENSOR_MT9V112:
+ case SENSOR_MT9V111:
+ case SENSOR_MT9V011:
+ exp[0] |= (3 << 4);
+ exp[2] = 0x09;
+ exp[3] = sd->exposure >> 8;
+ exp[4] = sd->exposure & 0xff;
+ break;
+ case SENSOR_HV7131R:
+ exp[0] |= (4 << 4);
+ exp[2] = 0x25;
+ exp[3] = ((sd->exposure * 0xffffff) / 0xffff) >> 16;
+ exp[4] = ((sd->exposure * 0xffffff) / 0xffff) >> 8;
+ exp[5] = ((sd->exposure * 0xffffff) / 0xffff) & 0xff;
+ break;
+ }
+ i2c_w(gspca_dev, exp);
+ return 0;
+}
+
+static int set_gain(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ u8 gain[8] = {0x81, sd->i2c_addr, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1d};
+ switch (sd->sensor) {
+ case SENSOR_OV7660:
+ case SENSOR_OV7670:
+ case SENSOR_SOI968:
+ case SENSOR_OV9655:
+ case SENSOR_OV9650:
+ gain[0] |= (2 << 4);
+ gain[3] = ov_gain[sd->gain];
+ break;
+ case SENSOR_MT9V011:
+ case SENSOR_MT9V111:
+ gain[0] |= (3 << 4);
+ gain[2] = 0x35;
+ gain[3] = micron1_gain[sd->gain] >> 8;
+ gain[4] = micron1_gain[sd->gain] & 0xff;
+ break;
+ case SENSOR_MT9V112:
+ case SENSOR_MT9M111:
+ gain[0] |= (3 << 4);
+ gain[2] = 0x2f;
+ gain[3] = micron1_gain[sd->gain] >> 8;
+ gain[4] = micron1_gain[sd->gain] & 0xff;
+ break;
+ case SENSOR_MT9M001:
+ gain[0] |= (3 << 4);
+ gain[2] = 0x2f;
+ gain[3] = micron2_gain[sd->gain] >> 8;
+ gain[4] = micron2_gain[sd->gain] & 0xff;
+ break;
+ case SENSOR_HV7131R:
+ gain[0] |= (2 << 4);
+ gain[2] = 0x30;
+ gain[3] = hv7131r_gain[sd->gain];
+ break;
+ }
+ i2c_w(gspca_dev, gain);
+ return 0;
+}
+
+static int sd_setbrightness(struct gspca_dev *gspca_dev, s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->brightness = val;
+ if (gspca_dev->streaming)
+ return set_cmatrix(gspca_dev);
+ return 0;
+}
+
+static int sd_getbrightness(struct gspca_dev *gspca_dev, s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ *val = sd->brightness;
+ return 0;
+}
+
+
+static int sd_setcontrast(struct gspca_dev *gspca_dev, s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->contrast = val;
+ if (gspca_dev->streaming)
+ return set_cmatrix(gspca_dev);
+ return 0;
+}
+
+static int sd_getcontrast(struct gspca_dev *gspca_dev, s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ *val = sd->contrast;
+ return 0;
+}
+
+static int sd_setsaturation(struct gspca_dev *gspca_dev, s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->saturation = val;
+ if (gspca_dev->streaming)
+ return set_cmatrix(gspca_dev);
+ return 0;
+}
+
+static int sd_getsaturation(struct gspca_dev *gspca_dev, s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ *val = sd->saturation;
+ return 0;
+}
+
+static int sd_sethue(struct gspca_dev *gspca_dev, s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->hue = val;
+ if (gspca_dev->streaming)
+ return set_cmatrix(gspca_dev);
+ return 0;
+}
+
+static int sd_gethue(struct gspca_dev *gspca_dev, s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ *val = sd->hue;
+ return 0;
+}
+
+static int sd_setgamma(struct gspca_dev *gspca_dev, s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->gamma = val;
+ if (gspca_dev->streaming)
+ return set_gamma(gspca_dev);
+ return 0;
+}
+
+static int sd_getgamma(struct gspca_dev *gspca_dev, s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ *val = sd->gamma;
+ return 0;
+}
+
+static int sd_setredbalance(struct gspca_dev *gspca_dev, s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->red = val;
+ if (gspca_dev->streaming)
+ return set_redblue(gspca_dev);
+ return 0;
+}
+
+static int sd_getredbalance(struct gspca_dev *gspca_dev, s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ *val = sd->red;
+ return 0;
+}
+
+static int sd_setbluebalance(struct gspca_dev *gspca_dev, s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->blue = val;
+ if (gspca_dev->streaming)
+ return set_redblue(gspca_dev);
+ return 0;
+}
+
+static int sd_getbluebalance(struct gspca_dev *gspca_dev, s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ *val = sd->blue;
+ return 0;
+}
+
+static int sd_sethflip(struct gspca_dev *gspca_dev, s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->hflip = val;
+ if (gspca_dev->streaming)
+ return set_hvflip(gspca_dev);
+ return 0;
+}
+
+static int sd_gethflip(struct gspca_dev *gspca_dev, s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ *val = sd->hflip;
+ return 0;
+}
+
+static int sd_setvflip(struct gspca_dev *gspca_dev, s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->vflip = val;
+ if (gspca_dev->streaming)
+ return set_hvflip(gspca_dev);
+ return 0;
+}
+
+static int sd_getvflip(struct gspca_dev *gspca_dev, s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ *val = sd->vflip;
+ return 0;
+}
+
+static int sd_setexposure(struct gspca_dev *gspca_dev, s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->exposure = val;
+ if (gspca_dev->streaming)
+ return set_exposure(gspca_dev);
+ return 0;
+}
+
+static int sd_getexposure(struct gspca_dev *gspca_dev, s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ *val = sd->exposure;
+ return 0;
+}
+
+static int sd_setgain(struct gspca_dev *gspca_dev, s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->gain = val;
+ if (gspca_dev->streaming)
+ return set_gain(gspca_dev);
+ return 0;
+}
+
+static int sd_getgain(struct gspca_dev *gspca_dev, s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ *val = sd->gain;
+ return 0;
+}
+
+static int sd_setautoexposure(struct gspca_dev *gspca_dev, s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ sd->auto_exposure = val;
+ return 0;
+}
+
+static int sd_getautoexposure(struct gspca_dev *gspca_dev, s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ *val = sd->auto_exposure;
+ return 0;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int sd_dbg_g_register(struct gspca_dev *gspca_dev,
+ struct v4l2_dbg_register *reg)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ switch (reg->match.type) {
+ case V4L2_CHIP_MATCH_HOST:
+ if (reg->match.addr != 0)
+ return -EINVAL;
+ if (reg->reg < 0x1000 || reg->reg > 0x11ff)
+ return -EINVAL;
+ if (reg_r(gspca_dev, reg->reg, 1) < 0)
+ return -EINVAL;
+ reg->val = gspca_dev->usb_buf[0];
+ return 0;
+ case V4L2_CHIP_MATCH_I2C_ADDR:
+ if (reg->match.addr != sd->i2c_addr)
+ return -EINVAL;
+ if (sd->sensor >= SENSOR_MT9V011 &&
+ sd->sensor <= SENSOR_MT9M111) {
+ if (i2c_r2(gspca_dev, reg->reg, (u16 *)®->val) < 0)
+ return -EINVAL;
+ } else {
+ if (i2c_r1(gspca_dev, reg->reg, (u8 *)®->val) < 0)
+ return -EINVAL;
+ }
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static int sd_dbg_s_register(struct gspca_dev *gspca_dev,
+ struct v4l2_dbg_register *reg)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ switch (reg->match.type) {
+ case V4L2_CHIP_MATCH_HOST:
+ if (reg->match.addr != 0)
+ return -EINVAL;
+ if (reg->reg < 0x1000 || reg->reg > 0x11ff)
+ return -EINVAL;
+ if (reg_w1(gspca_dev, reg->reg, reg->val) < 0)
+ return -EINVAL;
+ return 0;
+ case V4L2_CHIP_MATCH_I2C_ADDR:
+ if (reg->match.addr != sd->i2c_addr)
+ return -EINVAL;
+ if (sd->sensor >= SENSOR_MT9V011 &&
+ sd->sensor <= SENSOR_MT9M111) {
+ if (i2c_w2(gspca_dev, reg->reg, reg->val) < 0)
+ return -EINVAL;
+ } else {
+ if (i2c_w1(gspca_dev, reg->reg, reg->val) < 0)
+ return -EINVAL;
+ }
+ return 0;
+ }
+ return -EINVAL;
+}
+#endif
+
+static int sd_chip_ident(struct gspca_dev *gspca_dev,
+ struct v4l2_dbg_chip_ident *chip)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ switch (chip->match.type) {
+ case V4L2_CHIP_MATCH_HOST:
+ if (chip->match.addr != 0)
+ return -EINVAL;
+ chip->revision = 0;
+ chip->ident = V4L2_IDENT_SN9C20X;
+ return 0;
+ case V4L2_CHIP_MATCH_I2C_ADDR:
+ if (chip->match.addr != sd->i2c_addr)
+ return -EINVAL;
+ chip->revision = 0;
+ chip->ident = i2c_ident[sd->sensor];
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static int sd_config(struct gspca_dev *gspca_dev,
+ const struct usb_device_id *id)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ struct cam *cam;
+
+ cam = &gspca_dev->cam;
+
+ sd->sensor = (id->driver_info >> 8) & 0xff;
+ sd->i2c_addr = id->driver_info & 0xff;
+
+ switch (sd->sensor) {
+ case SENSOR_OV9650:
+ cam->cam_mode = sxga_mode;
+ cam->nmodes = ARRAY_SIZE(sxga_mode);
+ break;
+ default:
+ cam->cam_mode = vga_mode;
+ cam->nmodes = ARRAY_SIZE(vga_mode);
+ }
+
+ sd->old_step = 0;
+ sd->older_step = 0;
+ sd->exposure_step = 16;
+
+ sd->brightness = BRIGHTNESS_DEFAULT;
+ sd->contrast = CONTRAST_DEFAULT;
+ sd->saturation = SATURATION_DEFAULT;
+ sd->hue = HUE_DEFAULT;
+ sd->gamma = GAMMA_DEFAULT;
+ sd->red = RED_DEFAULT;
+ sd->blue = BLUE_DEFAULT;
+
+ sd->hflip = HFLIP_DEFAULT;
+ sd->vflip = VFLIP_DEFAULT;
+ sd->exposure = EXPOSURE_DEFAULT;
+ sd->gain = GAIN_DEFAULT;
+ sd->auto_exposure = AUTO_EXPOSURE_DEFAULT;
+
+ sd->quality = 95;
+
+#ifdef CONFIG_USB_GSPCA_SN9C20X_EVDEV
+ sd->input_gpio = (id->driver_info >> 16) & 0xff;
+ if (sn9c20x_input_init(gspca_dev) < 0)
+ return -ENODEV;
+#endif
+ return 0;
+}
+
+static int sd_init(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int i;
+ u8 value;
+ u8 i2c_init[9] =
+ {0x80, sd->i2c_addr, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03};
+
+ for (i = 0; i < ARRAY_SIZE(bridge_init); i++) {
+ value = bridge_init[i][1];
+ if (reg_w(gspca_dev, bridge_init[i][0], &value, 1) < 0) {
+ err("Device initialization failed");
+ return -ENODEV;
+ }
+ }
+
+ if (reg_w(gspca_dev, 0x10c0, i2c_init, 9) < 0) {
+ err("Device initialization failed");
+ return -ENODEV;
+ }
+
+ switch (sd->sensor) {
+ case SENSOR_OV9650:
+ if (ov9650_init_sensor(gspca_dev) < 0)
+ return -ENODEV;
+ info("OV9650 sensor detected");
+ break;
+ case SENSOR_OV9655:
+ if (ov9655_init_sensor(gspca_dev) < 0)
+ return -ENODEV;
+ info("OV9655 sensor detected");
+ break;
+ case SENSOR_SOI968:
+ if (soi968_init_sensor(gspca_dev) < 0)
+ return -ENODEV;
+ info("SOI968 sensor detected");
+ break;
+ case SENSOR_OV7660:
+ if (ov7660_init_sensor(gspca_dev) < 0)
+ return -ENODEV;
+ info("OV7660 sensor detected");
+ break;
+ case SENSOR_OV7670:
+ if (ov7670_init_sensor(gspca_dev) < 0)
+ return -ENODEV;
+ info("OV7670 sensor detected");
+ break;
+ case SENSOR_MT9VPRB:
+ if (mt9v_init_sensor(gspca_dev) < 0)
+ return -ENODEV;
+ break;
+ case SENSOR_MT9M111:
+ if (mt9m111_init_sensor(gspca_dev) < 0)
+ return -ENODEV;
+ info("MT9M111 sensor detected");
+ break;
+ case SENSOR_MT9M001:
+ if (mt9m001_init_sensor(gspca_dev) < 0)
+ return -ENODEV;
+ info("MT9M001 sensor detected");
+ break;
+ case SENSOR_HV7131R:
+ if (hv7131r_init_sensor(gspca_dev) < 0)
+ return -ENODEV;
+ info("HV7131R sensor detected");
+ break;
+ default:
+ info("Unsupported Sensor");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static void configure_sensor_output(struct gspca_dev *gspca_dev, int mode)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ u8 value;
+ switch (sd->sensor) {
+ case SENSOR_OV9650:
+ if (mode & MODE_SXGA) {
+ i2c_w1(gspca_dev, 0x17, 0x1b);
+ i2c_w1(gspca_dev, 0x18, 0xbc);
+ i2c_w1(gspca_dev, 0x19, 0x01);
+ i2c_w1(gspca_dev, 0x1a, 0x82);
+ i2c_r1(gspca_dev, 0x12, &value);
+ i2c_w1(gspca_dev, 0x12, value & 0x07);
+ } else {
+ i2c_w1(gspca_dev, 0x17, 0x24);
+ i2c_w1(gspca_dev, 0x18, 0xc5);
+ i2c_w1(gspca_dev, 0x19, 0x00);
+ i2c_w1(gspca_dev, 0x1a, 0x3c);
+ i2c_r1(gspca_dev, 0x12, &value);
+ i2c_w1(gspca_dev, 0x12, (value & 0x7) | 0x40);
+ }
+ break;
+ }
+}
+
+#define HW_WIN(mode, hstart, vstart) \
+((const u8 []){hstart & 0xff, hstart >> 8, \
+vstart & 0xff, vstart >> 8, \
+(mode & MODE_SXGA ? 1280 >> 4 : 640 >> 4), \
+(mode & MODE_SXGA ? 1024 >> 3 : 480 >> 3)})
+
+#define CLR_WIN(width, height) \
+((const u8 [])\
+{0, width >> 2, 0, height >> 1,\
+((width >> 10) & 0x01) | ((height >> 8) & 0x6)})
+
+static int sd_start(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
+ int width = gspca_dev->width;
+ int height = gspca_dev->height;
+ u8 fmt, scale = 0;
+
+ sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+ if (sd->jpeg_hdr == NULL)
+ return -ENOMEM;
+
+ jpeg_define(sd->jpeg_hdr, height, width,
+ 0x21);
+ jpeg_set_qual(sd->jpeg_hdr, sd->quality);
+
+ if (mode & MODE_RAW)
+ fmt = 0x2d;
+ else if (mode & MODE_JPEG)
+ fmt = 0x2c;
+ else
+ fmt = 0x2f;
+
+ switch (mode & 0x0f) {
+ case 3:
+ scale = 0xc0;
+ info("Set 1280x1024");
+ break;
+ case 2:
+ scale = 0x80;
+ info("Set 640x480");
+ break;
+ case 1:
+ scale = 0x90;
+ info("Set 320x240");
+ break;
+ case 0:
+ scale = 0xa0;
+ info("Set 160x120");
+ break;
+ }
+
+ configure_sensor_output(gspca_dev, mode);
+ reg_w(gspca_dev, 0x1100, sd->jpeg_hdr + JPEG_QT0_OFFSET, 64);
+ reg_w(gspca_dev, 0x1140, sd->jpeg_hdr + JPEG_QT1_OFFSET, 64);
+ reg_w(gspca_dev, 0x10fb, CLR_WIN(width, height), 5);
+ reg_w(gspca_dev, 0x1180, HW_WIN(mode, sd->hstart, sd->vstart), 6);
+ reg_w1(gspca_dev, 0x1189, scale);
+ reg_w1(gspca_dev, 0x10e0, fmt);
+
+ set_cmatrix(gspca_dev);
+ set_gamma(gspca_dev);
+ set_redblue(gspca_dev);
+ set_gain(gspca_dev);
+ set_exposure(gspca_dev);
+ set_hvflip(gspca_dev);
+
+ reg_r(gspca_dev, 0x1061, 1);
+ reg_w1(gspca_dev, 0x1061, gspca_dev->usb_buf[0] | 0x02);
+ return 0;
+}
+
+static void sd_stopN(struct gspca_dev *gspca_dev)
+{
+ reg_r(gspca_dev, 0x1061, 1);
+ reg_w1(gspca_dev, 0x1061, gspca_dev->usb_buf[0] & ~0x02);
+}
+
+static void sd_stop0(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ kfree(sd->jpeg_hdr);
+}
+
+static void do_autoexposure(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int avg_lum, new_exp;
+
+ if (!sd->auto_exposure)
+ return;
+
+ avg_lum = atomic_read(&sd->avg_lum);
+
+ /*
+ * some hardcoded values are present
+ * like those for maximal/minimal exposure
+ * and exposure steps
+ */
+ if (avg_lum < MIN_AVG_LUM) {
+ if (sd->exposure > 0x1770)
+ return;
+
+ new_exp = sd->exposure + sd->exposure_step;
+ if (new_exp > 0x1770)
+ new_exp = 0x1770;
+ if (new_exp < 0x10)
+ new_exp = 0x10;
+ sd->exposure = new_exp;
+ set_exposure(gspca_dev);
+
+ sd->older_step = sd->old_step;
+ sd->old_step = 1;
+
+ if (sd->old_step ^ sd->older_step)
+ sd->exposure_step /= 2;
+ else
+ sd->exposure_step += 2;
+ }
+ if (avg_lum > MAX_AVG_LUM) {
+ if (sd->exposure < 0x10)
+ return;
+ new_exp = sd->exposure - sd->exposure_step;
+ if (new_exp > 0x1700)
+ new_exp = 0x1770;
+ if (new_exp < 0x10)
+ new_exp = 0x10;
+ sd->exposure = new_exp;
+ set_exposure(gspca_dev);
+ sd->older_step = sd->old_step;
+ sd->old_step = 0;
+
+ if (sd->old_step ^ sd->older_step)
+ sd->exposure_step /= 2;
+ else
+ sd->exposure_step += 2;
+ }
+}
+
+static void sd_pkt_scan(struct gspca_dev *gspca_dev,
+ struct gspca_frame *frame, /* target */
+ u8 *data, /* isoc packet */
+ int len) /* iso packet length */
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int avg_lum;
+ static unsigned char frame_header[] =
+ {0xff, 0xff, 0x00, 0xc4, 0xc4, 0x96};
+ if (len == 64 && memcmp(data, frame_header, 6) == 0) {
+ avg_lum = ((data[35] >> 2) & 3) |
+ (data[20] << 2) |
+ (data[19] << 10);
+ avg_lum += ((data[35] >> 4) & 3) |
+ (data[22] << 2) |
+ (data[21] << 10);
+ avg_lum += ((data[35] >> 6) & 3) |
+ (data[24] << 2) |
+ (data[23] << 10);
+ avg_lum += (data[36] & 3) |
+ (data[26] << 2) |
+ (data[25] << 10);
+ avg_lum += ((data[36] >> 2) & 3) |
+ (data[28] << 2) |
+ (data[27] << 10);
+ avg_lum += ((data[36] >> 4) & 3) |
+ (data[30] << 2) |
+ (data[29] << 10);
+ avg_lum += ((data[36] >> 6) & 3) |
+ (data[32] << 2) |
+ (data[31] << 10);
+ avg_lum += ((data[44] >> 4) & 3) |
+ (data[34] << 2) |
+ (data[33] << 10);
+ avg_lum >>= 9;
+ atomic_set(&sd->avg_lum, avg_lum);
+ gspca_frame_add(gspca_dev, LAST_PACKET,
+ frame, data, len);
+ return;
+ }
+ if (gspca_dev->last_packet_type == LAST_PACKET) {
+ if (gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv
+ & MODE_JPEG) {
+ gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
+ sd->jpeg_hdr, JPEG_HDR_SZ);
+ gspca_frame_add(gspca_dev, INTER_PACKET, frame,
+ data, len);
+ } else {
+ gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
+ data, len);
+ }
+ } else {
+ gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
+ }
+}
+
+/* sub-driver description */
+static const struct sd_desc sd_desc = {
+ .name = MODULE_NAME,
+ .ctrls = sd_ctrls,
+ .nctrls = ARRAY_SIZE(sd_ctrls),
+ .config = sd_config,
+ .init = sd_init,
+ .start = sd_start,
+ .stopN = sd_stopN,
+ .stop0 = sd_stop0,
+ .pkt_scan = sd_pkt_scan,
+ .dq_callback = do_autoexposure,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ .set_register = sd_dbg_s_register,
+ .get_register = sd_dbg_g_register,
+#endif
+ .get_chip_ident = sd_chip_ident,
+};
+
+#define SN9C20X(sensor, i2c_addr, button_mask) \
+ .driver_info = (button_mask << 16) \
+ | (SENSOR_ ## sensor << 8) \
+ | (i2c_addr)
+
+static const __devinitdata struct usb_device_id device_table[] = {
+ {USB_DEVICE(0x0c45, 0x6240), SN9C20X(MT9M001, 0x5d, 0)},
+ {USB_DEVICE(0x0c45, 0x6242), SN9C20X(MT9M111, 0x5d, 0)},
+ {USB_DEVICE(0x0c45, 0x6248), SN9C20X(OV9655, 0x30, 0)},
+ {USB_DEVICE(0x0c45, 0x624e), SN9C20X(SOI968, 0x30, 0x10)},
+ {USB_DEVICE(0x0c45, 0x624f), SN9C20X(OV9650, 0x30, 0)},
+ {USB_DEVICE(0x0c45, 0x6251), SN9C20X(OV9650, 0x30, 0)},
+ {USB_DEVICE(0x0c45, 0x6253), SN9C20X(OV9650, 0x30, 0)},
+ {USB_DEVICE(0x0c45, 0x6260), SN9C20X(OV7670, 0x21, 0)},
+ {USB_DEVICE(0x0c45, 0x6270), SN9C20X(MT9VPRB, 0x00, 0)},
+ {USB_DEVICE(0x0c45, 0x627b), SN9C20X(OV7660, 0x21, 0)},
+ {USB_DEVICE(0x0c45, 0x627c), SN9C20X(HV7131R, 0x11, 0)},
+ {USB_DEVICE(0x0c45, 0x627f), SN9C20X(OV9650, 0x30, 0)},
+ {USB_DEVICE(0x0c45, 0x6280), SN9C20X(MT9M001, 0x5d, 0)},
+ {USB_DEVICE(0x0c45, 0x6282), SN9C20X(MT9M111, 0x5d, 0)},
+ {USB_DEVICE(0x0c45, 0x6288), SN9C20X(OV9655, 0x30, 0)},
+ {USB_DEVICE(0x0c45, 0x628e), SN9C20X(SOI968, 0x30, 0)},
+ {USB_DEVICE(0x0c45, 0x628f), SN9C20X(OV9650, 0x30, 0)},
+ {USB_DEVICE(0x0c45, 0x62a0), SN9C20X(OV7670, 0x21, 0)},
+ {USB_DEVICE(0x0c45, 0x62b0), SN9C20X(MT9VPRB, 0x00, 0)},
+ {USB_DEVICE(0x0c45, 0x62b3), SN9C20X(OV9655, 0x30, 0)},
+ {USB_DEVICE(0x0c45, 0x62bb), SN9C20X(OV7660, 0x21, 0)},
+ {USB_DEVICE(0x0c45, 0x62bc), SN9C20X(HV7131R, 0x11, 0)},
+ {USB_DEVICE(0x045e, 0x00f4), SN9C20X(OV9650, 0x30, 0)},
+ {USB_DEVICE(0x145f, 0x013d), SN9C20X(OV7660, 0x21, 0)},
+ {USB_DEVICE(0x0458, 0x7029), SN9C20X(HV7131R, 0x11, 0)},
+ {USB_DEVICE(0xa168, 0x0610), SN9C20X(HV7131R, 0x11, 0)},
+ {USB_DEVICE(0xa168, 0x0611), SN9C20X(HV7131R, 0x11, 0)},
+ {USB_DEVICE(0xa168, 0x0613), SN9C20X(HV7131R, 0x11, 0)},
+ {USB_DEVICE(0xa168, 0x0618), SN9C20X(HV7131R, 0x11, 0)},
+ {USB_DEVICE(0xa168, 0x0614), SN9C20X(MT9M111, 0x5d, 0)},
+ {USB_DEVICE(0xa168, 0x0615), SN9C20X(MT9M111, 0x5d, 0)},
+ {USB_DEVICE(0xa168, 0x0617), SN9C20X(MT9M111, 0x5d, 0)},
+ {}
+};
+MODULE_DEVICE_TABLE(usb, device_table);
+
+/* -- device connect -- */
+static int sd_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd),
+ THIS_MODULE);
+}
+
+static void sd_disconnect(struct usb_interface *intf)
+{
+#ifdef CONFIG_USB_GSPCA_SN9C20X_EVDEV
+ struct gspca_dev *gspca_dev = usb_get_intfdata(intf);
+
+ sn9c20x_input_cleanup(gspca_dev);
+#endif
+
+ gspca_disconnect(intf);
+}
+
+static struct usb_driver sd_driver = {
+ .name = MODULE_NAME,
+ .id_table = device_table,
+ .probe = sd_probe,
+ .disconnect = sd_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+ .reset_resume = gspca_resume,
+#endif
+};
+
+/* -- module insert / remove -- */
+static int __init sd_mod_init(void)
+{
+ int ret;
+ ret = usb_register(&sd_driver);
+ if (ret < 0)
+ return ret;
+ info("registered");
+ return 0;
+}
+static void __exit sd_mod_exit(void)
+{
+ usb_deregister(&sd_driver);
+ info("deregistered");
+}
+
+module_init(sd_mod_init);
+module_exit(sd_mod_exit);
{
struct sd *sd = (struct sd *) gspca_dev;
+ if (gspca_dev->ctrl_dis & (1 << FREQ_IDX))
+ return;
if (sd->sensor == SENSOR_OV7660) {
switch (sd->freq) {
case 0: /* Banding filter disabled */
/* create the JPEG header */
sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+ if (!sd->jpeg_hdr)
+ return -ENOMEM;
jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
0x21); /* JPEG 422 */
jpeg_set_qual(sd->jpeg_hdr, sd->quality);
/* create the JPEG header */
sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+ if (!sd->jpeg_hdr)
+ return -ENOMEM;
jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
0x22); /* JPEG 411 */
jpeg_set_qual(sd->jpeg_hdr, sd->quality);
/* create the JPEG header */
sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+ if (!sd->jpeg_hdr)
+ return -ENOMEM;
jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
0x22); /* JPEG 411 */
jpeg_set_qual(sd->jpeg_hdr, sd->quality);
{
HDCS_1X00_DEF_WIDTH,
HDCS_1X00_DEF_HEIGHT,
- V4L2_PIX_FMT_SBGGR8,
+ V4L2_PIX_FMT_SGRBG8,
V4L2_FIELD_NONE,
.sizeimage =
HDCS_1X00_DEF_WIDTH * HDCS_1X00_DEF_HEIGHT,
{
HDCS_1020_DEF_WIDTH,
HDCS_1020_DEF_HEIGHT,
- V4L2_PIX_FMT_SBGGR8,
+ V4L2_PIX_FMT_SGRBG8,
V4L2_FIELD_NONE,
.sizeimage =
HDCS_1020_DEF_WIDTH * HDCS_1020_DEF_HEIGHT,
(reg + len > 0xff)))
return -EINVAL;
- for (i = 0; i < len; i++, reg++) {
- regs[2*i] = reg;
- regs[2*i+1] = vals[i];
+ for (i = 0; i < len; i++) {
+ regs[2 * i] = reg;
+ regs[2 * i + 1] = vals[i];
+ /* All addresses are shifted left one bit as bit 0 toggles r/w */
+ reg += 2;
}
return stv06xx_write_sensor_bytes(sd, regs, len);
}
ret = stv06xx_write_sensor(sd, HDCS_REG_CONTROL(sd), val);
- if (ret < 0)
+
+ /* Update the state if the write succeeded */
+ if (!ret)
hdcs->state = state;
return ret;
/* create the JPEG header */
sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+ if (!sd->jpeg_hdr)
+ return -ENOMEM;
jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
0x22); /* JPEG 411 */
jpeg_set_qual(sd->jpeg_hdr, sd->quality);
/* create the JPEG header */
sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+ if (!sd->jpeg_hdr)
+ return -ENOMEM;
jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
0x21); /* JPEG 422 */
jpeg_set_qual(sd->jpeg_hdr, sd->quality);
V4L2_STD_PAL_G | V4L2_STD_PAL_H | V4L2_STD_PAL_I |
V4L2_STD_PAL_D | V4L2_STD_PAL_M | V4L2_STD_PAL_N |
V4L2_STD_PAL_60,
+ .current_norm = V4L2_STD_NTSC | V4L2_STD_PAL_M |
+ V4L2_STD_PAL_60,
};
int hdpvr_register_videodev(struct hdpvr_device *dev, struct device *parent,
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/kernel.h>
#include "ivtv-driver.h"
#include "ivtv-cards.h"
idx = p.audio_properties & 0x03;
/* The audio clock of the digitizer must match the codec sample
rate otherwise you get some very strange effects. */
- if (idx < sizeof(freqs))
+ if (idx < ARRAY_SIZE(freqs))
ivtv_call_all(itv, audio, s_clock_freq, freqs[idx]);
return err;
}
#include <linux/i2c.h>
#include <linux/videodev2.h>
#include <linux/delay.h>
+#include <asm/div64.h>
#include <media/v4l2-device.h>
#include "mt9v011.h"
#include <media/v4l2-i2c-drv.h>
.step = 1,
.default_value = 0,
.flags = 0,
- },
+ }, {
+ .id = V4L2_CID_HFLIP,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Mirror",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 1,
+ .default_value = 0,
+ .flags = 0,
+ }, {
+ .id = V4L2_CID_VFLIP,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Vflip",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 1,
+ .default_value = 0,
+ .flags = 0,
+ }, {
+ }
};
struct mt9v011 {
struct v4l2_subdev sd;
unsigned width, height;
+ unsigned xtal;
+ unsigned hflip:1;
+ unsigned vflip:1;
u16 global_gain, red_bal, blue_bal;
};
{ R0A_MT9V011_CLK_SPEED, 0x0000 },
{ R1E_MT9V011_DIGITAL_ZOOM, 0x0000 },
- { R20_MT9V011_READ_MODE, 0x1000 },
- { R07_MT9V011_OUT_CTRL, 0x000a }, /* chip enable */
+ { R07_MT9V011_OUT_CTRL, 0x0002 }, /* chip enable */
};
static void set_balance(struct v4l2_subdev *sd)
mt9v011_write(sd, R2D_MT9V011_RED_GAIN, red_gain);
}
+static void calc_fps(struct v4l2_subdev *sd, u32 *numerator, u32 *denominator)
+{
+ struct mt9v011 *core = to_mt9v011(sd);
+ unsigned height, width, hblank, vblank, speed;
+ unsigned row_time, t_time;
+ u64 frames_per_ms;
+ unsigned tmp;
+
+ height = mt9v011_read(sd, R03_MT9V011_HEIGHT);
+ width = mt9v011_read(sd, R04_MT9V011_WIDTH);
+ hblank = mt9v011_read(sd, R05_MT9V011_HBLANK);
+ vblank = mt9v011_read(sd, R06_MT9V011_VBLANK);
+ speed = mt9v011_read(sd, R0A_MT9V011_CLK_SPEED);
+
+ row_time = (width + 113 + hblank) * (speed + 2);
+ t_time = row_time * (height + vblank + 1);
+
+ frames_per_ms = core->xtal * 1000l;
+ do_div(frames_per_ms, t_time);
+ tmp = frames_per_ms;
+
+ v4l2_dbg(1, debug, sd, "Programmed to %u.%03u fps (%d pixel clcks)\n",
+ tmp / 1000, tmp % 1000, t_time);
+
+ if (numerator && denominator) {
+ *numerator = 1000;
+ *denominator = (u32)frames_per_ms;
+ }
+}
+
+static u16 calc_speed(struct v4l2_subdev *sd, u32 numerator, u32 denominator)
+{
+ struct mt9v011 *core = to_mt9v011(sd);
+ unsigned height, width, hblank, vblank;
+ unsigned row_time, line_time;
+ u64 t_time, speed;
+
+ /* Avoid bogus calculus */
+ if (!numerator || !denominator)
+ return 0;
+
+ height = mt9v011_read(sd, R03_MT9V011_HEIGHT);
+ width = mt9v011_read(sd, R04_MT9V011_WIDTH);
+ hblank = mt9v011_read(sd, R05_MT9V011_HBLANK);
+ vblank = mt9v011_read(sd, R06_MT9V011_VBLANK);
+
+ row_time = width + 113 + hblank;
+ line_time = height + vblank + 1;
+
+ t_time = core->xtal * ((u64)numerator);
+ /* round to the closest value */
+ t_time += denominator / 2;
+ do_div(t_time, denominator);
+
+ speed = t_time;
+ do_div(speed, row_time * line_time);
+
+ /* Avoid having a negative value for speed */
+ if (speed < 2)
+ speed = 0;
+ else
+ speed -= 2;
+
+ /* Avoid speed overflow */
+ if (speed > 15)
+ return 15;
+
+ return (u16)speed;
+}
+
static void set_res(struct v4l2_subdev *sd)
{
struct mt9v011 *core = to_mt9v011(sd);
mt9v011_write(sd, R04_MT9V011_WIDTH, core->width);
mt9v011_write(sd, R05_MT9V011_HBLANK, 771 - core->width);
- vstart = 8 + (640 - core->height) / 2;
+ vstart = 8 + (480 - core->height) / 2;
mt9v011_write(sd, R01_MT9V011_ROWSTART, vstart);
mt9v011_write(sd, R03_MT9V011_HEIGHT, core->height);
mt9v011_write(sd, R06_MT9V011_VBLANK, 508 - core->height);
+
+ calc_fps(sd, NULL, NULL);
};
+static void set_read_mode(struct v4l2_subdev *sd)
+{
+ struct mt9v011 *core = to_mt9v011(sd);
+ unsigned mode = 0x1000;
+
+ if (core->hflip)
+ mode |= 0x4000;
+
+ if (core->vflip)
+ mode |= 0x8000;
+
+ mt9v011_write(sd, R20_MT9V011_READ_MODE, mode);
+}
+
static int mt9v011_reset(struct v4l2_subdev *sd, u32 val)
{
int i;
set_balance(sd);
set_res(sd);
+ set_read_mode(sd);
return 0;
};
case V4L2_CID_BLUE_BALANCE:
ctrl->value = core->blue_bal;
return 0;
+ case V4L2_CID_HFLIP:
+ ctrl->value = core->hflip ? 1 : 0;
+ return 0;
+ case V4L2_CID_VFLIP:
+ ctrl->value = core->vflip ? 1 : 0;
+ return 0;
}
return -EINVAL;
}
+static int mt9v011_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
+{
+ int i;
+
+ v4l2_dbg(1, debug, sd, "queryctrl called\n");
+
+ for (i = 0; i < ARRAY_SIZE(mt9v011_qctrl); i++)
+ if (qc->id && qc->id == mt9v011_qctrl[i].id) {
+ memcpy(qc, &(mt9v011_qctrl[i]),
+ sizeof(*qc));
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+
static int mt9v011_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
{
struct mt9v011 *core = to_mt9v011(sd);
case V4L2_CID_BLUE_BALANCE:
core->blue_bal = ctrl->value;
break;
+ case V4L2_CID_HFLIP:
+ core->hflip = ctrl->value;
+ set_read_mode(sd);
+ return 0;
+ case V4L2_CID_VFLIP:
+ core->vflip = ctrl->value;
+ set_read_mode(sd);
+ return 0;
default:
return -EINVAL;
}
return 0;
}
+static int mt9v011_g_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms)
+{
+ struct v4l2_captureparm *cp = &parms->parm.capture;
+
+ if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ memset(cp, 0, sizeof(struct v4l2_captureparm));
+ cp->capability = V4L2_CAP_TIMEPERFRAME;
+ calc_fps(sd,
+ &cp->timeperframe.numerator,
+ &cp->timeperframe.denominator);
+
+ return 0;
+}
+
+static int mt9v011_s_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms)
+{
+ struct v4l2_captureparm *cp = &parms->parm.capture;
+ struct v4l2_fract *tpf = &cp->timeperframe;
+ u16 speed;
+
+ if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+ if (cp->extendedmode != 0)
+ return -EINVAL;
+
+ speed = calc_speed(sd, tpf->numerator, tpf->denominator);
+
+ mt9v011_write(sd, R0A_MT9V011_CLK_SPEED, speed);
+ v4l2_dbg(1, debug, sd, "Setting speed to %d\n", speed);
+
+ /* Recalculate and update fps info */
+ calc_fps(sd, &tpf->numerator, &tpf->denominator);
+
+ return 0;
+}
+
static int mt9v011_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
{
struct v4l2_pix_format *pix = &fmt->fmt.pix;
return 0;
}
+static int mt9v011_s_config(struct v4l2_subdev *sd, int dumb, void *data)
+{
+ struct mt9v011 *core = to_mt9v011(sd);
+ unsigned *xtal = data;
+
+ v4l2_dbg(1, debug, sd, "s_config called\n");
+
+ if (xtal) {
+ core->xtal = *xtal;
+ v4l2_dbg(1, debug, sd, "xtal set to %d.%03d MHz\n",
+ *xtal / 1000000, (*xtal / 1000) % 1000);
+ }
+
+ return 0;
+}
+
#ifdef CONFIG_VIDEO_ADV_DEBUG
static int mt9v011_g_register(struct v4l2_subdev *sd,
static int mt9v011_g_chip_ident(struct v4l2_subdev *sd,
struct v4l2_dbg_chip_ident *chip)
{
+ u16 version;
struct i2c_client *client = v4l2_get_subdevdata(sd);
+ version = mt9v011_read(sd, R00_MT9V011_CHIP_VERSION);
+
return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_MT9V011,
- MT9V011_VERSION);
+ version);
}
static const struct v4l2_subdev_core_ops mt9v011_core_ops = {
+ .queryctrl = mt9v011_queryctrl,
.g_ctrl = mt9v011_g_ctrl,
.s_ctrl = mt9v011_s_ctrl,
.reset = mt9v011_reset,
+ .s_config = mt9v011_s_config,
.g_chip_ident = mt9v011_g_chip_ident,
#ifdef CONFIG_VIDEO_ADV_DEBUG
.g_register = mt9v011_g_register,
.enum_fmt = mt9v011_enum_fmt,
.try_fmt = mt9v011_try_fmt,
.s_fmt = mt9v011_s_fmt,
+ .g_parm = mt9v011_g_parm,
+ .s_parm = mt9v011_s_parm,
};
static const struct v4l2_subdev_ops mt9v011_ops = {
/* Check if the sensor is really a MT9V011 */
version = mt9v011_read(sd, R00_MT9V011_CHIP_VERSION);
- if (version != MT9V011_VERSION) {
- v4l2_info(sd, "*** unknown micron chip detected (0x%04x.\n",
+ if ((version != MT9V011_VERSION) &&
+ (version != MT9V011_REV_B_VERSION)) {
+ v4l2_info(sd, "*** unknown micron chip detected (0x%04x).\n",
version);
kfree(core);
return -EINVAL;
core->global_gain = 0x0024;
core->width = 640;
core->height = 480;
+ core->xtal = 27000000; /* Hz */
- v4l_info(c, "chip found @ 0x%02x (%s)\n",
- c->addr << 1, c->adapter->name);
+ v4l_info(c, "chip found @ 0x%02x (%s - chip version 0x%04x)\n",
+ c->addr << 1, c->adapter->name, version);
return 0;
}
#define R35_MT9V011_GLOBAL_GAIN 0x35
#define RF1_MT9V011_CHIP_ENABLE 0xf1
-#define MT9V011_VERSION 0x8243
+#define MT9V011_VERSION 0x8232
+#define MT9V011_REV_B_VERSION 0x8243
#endif
return ret;
}
+/* Called under spinlock_irqsave(&pcdev->lock, ...) */
static void mx1_videobuf_queue(struct videobuf_queue *vq,
struct videobuf_buffer *vb)
{
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
struct mx1_camera_dev *pcdev = ici->priv;
struct mx1_buffer *buf = container_of(vb, struct mx1_buffer, vb);
- unsigned long flags;
dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
vb, vb->baddr, vb->bsize);
- spin_lock_irqsave(&pcdev->lock, flags);
-
list_add_tail(&vb->queue, &pcdev->capture);
vb->state = VIDEOBUF_ACTIVE;
__raw_writel(temp, pcdev->base + CSICR1);
}
}
-
- spin_unlock_irqrestore(&pcdev->lock, flags);
}
static void mx1_videobuf_release(struct videobuf_queue *vq,
}
}
-/* Called with .vb_lock held */
+/*
+ * Called with .vb_lock mutex held and
+ * under spinlock_irqsave(&mx3_cam->lock, ...)
+ */
static void mx3_videobuf_queue(struct videobuf_queue *vq,
struct videobuf_buffer *vb)
{
struct idmac_video_param *video = &ichan->params.video;
const struct soc_camera_data_format *data_fmt = icd->current_fmt;
dma_cookie_t cookie;
- unsigned long flags;
+
+ BUG_ON(!irqs_disabled());
/* This is the configuration of one sg-element */
video->out_pixel_fmt = fourcc_to_ipu_pix(data_fmt->fourcc);
memset((void *)vb->baddr, 0xaa, vb->bsize);
#endif
- spin_lock_irqsave(&mx3_cam->lock, flags);
-
list_add_tail(&vb->queue, &mx3_cam->capture);
if (!mx3_cam->active) {
vb->state = VIDEOBUF_QUEUED;
}
- spin_unlock_irqrestore(&mx3_cam->lock, flags);
+ spin_unlock_irq(&mx3_cam->lock);
cookie = txd->tx_submit(txd);
dev_dbg(&icd->dev, "Submitted cookie %d DMA 0x%08x\n", cookie, sg_dma_address(&buf->sg));
+
+ spin_lock_irq(&mx3_cam->lock);
+
if (cookie >= 0)
return;
/* Submit error */
vb->state = VIDEOBUF_PREPARED;
- spin_lock_irqsave(&mx3_cam->lock, flags);
-
list_del_init(&vb->queue);
if (mx3_cam->active == buf)
mx3_cam->active = NULL;
-
- spin_unlock_irqrestore(&mx3_cam->lock, flags);
}
/* Called with .vb_lock held */
dev_dbg(pcdev->soc_host.dev, "%s\n", __func__);
}
+/* Called under spinlock_irqsave(&pcdev->lock, ...) */
static void pxa_videobuf_queue(struct videobuf_queue *vq,
struct videobuf_buffer *vb)
{
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
struct pxa_camera_dev *pcdev = ici->priv;
struct pxa_buffer *buf = container_of(vb, struct pxa_buffer, vb);
- unsigned long flags;
dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d active=%p\n", __func__,
vb, vb->baddr, vb->bsize, pcdev->active);
- spin_lock_irqsave(&pcdev->lock, flags);
-
list_add_tail(&vb->queue, &pcdev->capture);
vb->state = VIDEOBUF_ACTIVE;
if (!pcdev->active)
pxa_camera_start_capture(pcdev);
-
- spin_unlock_irqrestore(&pcdev->lock, flags);
}
static void pxa_videobuf_release(struct videobuf_queue *vq,
pcdev->mclk = 20000000;
}
+ pcdev->soc_host.dev = &pdev->dev;
pcdev->mclk_divisor = mclk_get_divisor(pcdev);
INIT_LIST_HEAD(&pcdev->capture);
pcdev->soc_host.drv_name = PXA_CAM_DRV_NAME;
pcdev->soc_host.ops = &pxa_soc_camera_host_ops;
pcdev->soc_host.priv = pcdev;
- pcdev->soc_host.dev = &pdev->dev;
pcdev->soc_host.nr = pdev->id;
err = soc_camera_host_register(&pcdev->soc_host);
.gpio = 0x0200100,
},
},
- [SAA7134_BOARD_HAUPPAUGE_HVR1120] = {
- .name = "Hauppauge WinTV-HVR1120 ATSC/QAM-Hybrid",
+ [SAA7134_BOARD_HAUPPAUGE_HVR1150] = {
+ .name = "Hauppauge WinTV-HVR1150 ATSC/QAM-Hybrid",
.audio_clock = 0x00187de7,
.tuner_type = TUNER_PHILIPS_TDA8290,
.radio_type = UNSET,
.gpio = 0x0800100, /* GPIO 23 HI for FM */
},
},
- [SAA7134_BOARD_HAUPPAUGE_HVR1110R3] = {
- .name = "Hauppauge WinTV-HVR1110r3 DVB-T/Hybrid",
+ [SAA7134_BOARD_HAUPPAUGE_HVR1120] = {
+ .name = "Hauppauge WinTV-HVR1120 DVB-T/Hybrid",
.audio_clock = 0x00187de7,
.tuner_type = TUNER_PHILIPS_TDA8290,
.radio_type = UNSET,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
.subvendor = 0x0070,
.subdevice = 0x6706,
- .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1120,
+ .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1150,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
.subvendor = 0x0070,
.subdevice = 0x6707,
- .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1110R3,
+ .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1120,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
.subvendor = 0x0070,
.subdevice = 0x6708,
- .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1120,
+ .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1150,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
.subvendor = 0x0070,
.subdevice = 0x6709,
- .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1110R3,
+ .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1120,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
.subvendor = 0x0070,
.subdevice = 0x670a,
- .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1110R3,
+ .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1120,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
switch (command) {
case TDA18271_CALLBACK_CMD_AGC_ENABLE: /* 0 */
switch (dev->board) {
+ case SAA7134_BOARD_HAUPPAUGE_HVR1150:
case SAA7134_BOARD_HAUPPAUGE_HVR1120:
- case SAA7134_BOARD_HAUPPAUGE_HVR1110R3:
ret = saa7134_tda18271_hvr11x0_toggle_agc(dev, arg);
break;
default:
int ret;
switch (dev->board) {
+ case SAA7134_BOARD_HAUPPAUGE_HVR1150:
case SAA7134_BOARD_HAUPPAUGE_HVR1120:
- case SAA7134_BOARD_HAUPPAUGE_HVR1110R3:
/* tda8290 + tda18271 */
ret = saa7134_tda8290_18271_callback(dev, command, arg);
break;
switch (tv.model) {
case 67019: /* WinTV-HVR1110 (Retail, IR Blaster, hybrid, FM, SVid/Comp, 3.5mm audio in) */
case 67109: /* WinTV-HVR1000 (Retail, IR Receive, analog, no FM, SVid/Comp, 3.5mm audio in) */
- case 67201: /* WinTV-HVR1120 (Retail, IR Receive, hybrid, FM, SVid/Comp, 3.5mm audio in) */
+ case 67201: /* WinTV-HVR1150 (Retail, IR Receive, hybrid, FM, SVid/Comp, 3.5mm audio in) */
case 67301: /* WinTV-HVR1000 (Retail, IR Receive, analog, no FM, SVid/Comp, 3.5mm audio in) */
case 67209: /* WinTV-HVR1110 (Retail, IR Receive, hybrid, FM, SVid/Comp, 3.5mm audio in) */
case 67559: /* WinTV-HVR1110 (OEM, no IR, hybrid, FM, SVid/Comp, RCA aud) */
case 67579: /* WinTV-HVR1110 (OEM, no IR, hybrid, no FM) */
case 67589: /* WinTV-HVR1110 (OEM, no IR, hybrid, no FM, SVid/Comp, RCA aud) */
case 67599: /* WinTV-HVR1110 (OEM, no IR, hybrid, no FM, SVid/Comp, RCA aud) */
- case 67651: /* WinTV-HVR1120 (OEM, no IR, hybrid, FM, SVid/Comp, RCA aud) */
+ case 67651: /* WinTV-HVR1150 (OEM, no IR, hybrid, FM, SVid/Comp, RCA aud) */
case 67659: /* WinTV-HVR1110 (OEM, no IR, hybrid, FM, SVid/Comp, RCA aud) */
break;
default:
saa_writeb (SAA7134_PRODUCTION_TEST_MODE, 0x00);
break;
+ case SAA7134_BOARD_HAUPPAUGE_HVR1150:
case SAA7134_BOARD_HAUPPAUGE_HVR1120:
- case SAA7134_BOARD_HAUPPAUGE_HVR1110R3:
/* GPIO 26 high for digital, low for analog */
saa7134_set_gpio(dev, 26, 0);
msleep(1);
dev->name, saa7134_boards[dev->board].name);
}
break;
+ case SAA7134_BOARD_HAUPPAUGE_HVR1150:
case SAA7134_BOARD_HAUPPAUGE_HVR1120:
- case SAA7134_BOARD_HAUPPAUGE_HVR1110R3:
hauppauge_eeprom(dev, dev->eedata+0x80);
break;
case SAA7134_BOARD_HAUPPAUGE_HVR1110:
&tda827x_cfg_2) < 0)
goto dettach_frontend;
break;
- case SAA7134_BOARD_HAUPPAUGE_HVR1110R3:
+ case SAA7134_BOARD_HAUPPAUGE_HVR1120:
fe0->dvb.frontend = dvb_attach(tda10048_attach,
&hcw_tda10048_config,
&dev->i2c_adap);
&tda827x_cfg_1) < 0)
goto dettach_frontend;
break;
- case SAA7134_BOARD_HAUPPAUGE_HVR1120:
+ case SAA7134_BOARD_HAUPPAUGE_HVR1150:
fe0->dvb.frontend = dvb_attach(lgdt3305_attach,
&hcw_lgdt3305_config,
&dev->i2c_adap);
#define SAA7134_BOARD_ASUSTeK_TIGER 152
#define SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG 153
#define SAA7134_BOARD_AVERMEDIA_GO_007_FM_PLUS 154
-#define SAA7134_BOARD_HAUPPAUGE_HVR1120 155
-#define SAA7134_BOARD_HAUPPAUGE_HVR1110R3 156
+#define SAA7134_BOARD_HAUPPAUGE_HVR1150 155
+#define SAA7134_BOARD_HAUPPAUGE_HVR1120 156
#define SAA7134_BOARD_AVERMEDIA_STUDIO_507UA 157
#define SAA7134_BOARD_AVERMEDIA_CARDBUS_501 158
#define SAA7134_BOARD_BEHOLD_505RDS 159
return ret;
}
+/* Called under spinlock_irqsave(&pcdev->lock, ...) */
static void sh_mobile_ceu_videobuf_queue(struct videobuf_queue *vq,
struct videobuf_buffer *vb)
{
struct soc_camera_device *icd = vq->priv_data;
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
struct sh_mobile_ceu_dev *pcdev = ici->priv;
- unsigned long flags;
dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %zd\n", __func__,
vb, vb->baddr, vb->bsize);
vb->state = VIDEOBUF_QUEUED;
- spin_lock_irqsave(&pcdev->lock, flags);
list_add_tail(&vb->queue, &pcdev->capture);
if (!pcdev->active) {
pcdev->active = vb;
sh_mobile_ceu_capture(pcdev);
}
-
- spin_unlock_irqrestore(&pcdev->lock, flags);
}
static void sh_mobile_ceu_videobuf_release(struct videobuf_queue *vq,
depth = 1;
else
depth = 2;
- while (stk_sizes[i].m != dev->vsettings.mode
- && i < ARRAY_SIZE(stk_sizes))
+ while (i < ARRAY_SIZE(stk_sizes) &&
+ stk_sizes[i].m != dev->vsettings.mode)
i++;
if (i == ARRAY_SIZE(stk_sizes)) {
STK_ERROR("Something is broken in %s\n", __func__);
.bInterfaceSubClass = 1,
.bInterfaceProtocol = 0,
.driver_info = UVC_QUIRK_STREAM_NO_FID },
- /* ViMicro */
- { .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+ /* ViMicro Vega */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x0ac8,
+ .idProduct = 0x332d,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_FIX_BANDWIDTH },
+ /* ViMicro - Minoru3D */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x0ac8,
+ .idProduct = 0x3410,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_FIX_BANDWIDTH },
+ /* ViMicro Venus - Minoru3D */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
| USB_DEVICE_ID_MATCH_INT_INFO,
.idVendor = 0x0ac8,
- .idProduct = 0x0000,
+ .idProduct = 0x3420,
.bInterfaceClass = USB_CLASS_VIDEO,
.bInterfaceSubClass = 1,
.bInterfaceProtocol = 0,
break;
default:
- uvc_printk(KERN_INFO, "unknown event type %u.\n",
- dev->status[0]);
+ uvc_trace(UVC_TRACE_STATUS, "Unknown status event "
+ "type %u.\n", dev->status[0]);
break;
}
}
/* Calls the specific handler */
if (ops->vidioc_g_std)
ret = ops->vidioc_g_std(file, fh, id);
- else
+ else if (vfd->current_norm)
*id = vfd->current_norm;
+ else
+ ret = -EINVAL;
if (!ret)
dbgarg(cmd, "std=0x%08Lx\n", (long long unsigned)*id);
break;
ret = ops->vidioc_g_parm(file, fh, p);
} else {
+ v4l2_std_id std = vfd->current_norm;
+
if (p->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
return -EINVAL;
- v4l2_video_std_frame_period(vfd->current_norm,
- &p->parm.capture.timeperframe);
ret = 0;
+ if (ops->vidioc_g_std)
+ ret = ops->vidioc_g_std(file, fh, &std);
+ else if (std == 0)
+ ret = -EINVAL;
+ if (ret == 0)
+ v4l2_video_std_frame_period(std,
+ &p->parm.capture.timeperframe);
}
dbgarg(cmd, "type=%d\n", p->type);
for (i = 0; i < 2; i++) {
err =
send_control_msg(udev, 1, init[cam->method][i].value,
- 0, init[i][cam->method].bytes,
+ 0, init[cam->method][i].bytes,
init[cam->method][i].size);
if (err < 0) {
dev_err(&udev->dev, "error during release sequence\n");
static int twl4030_irq_thread(void *data)
{
long irq = (long)data;
- struct irq_desc *desc = irq_to_desc(irq);
static unsigned i2c_errors;
static const unsigned max_i2c_errors = 100;
- if (!desc) {
- pr_err("twl4030: Invalid IRQ: %ld\n", irq);
- return -EINVAL;
- }
current->flags |= PF_NOFREEZE;
}
local_irq_enable();
- desc->chip->unmask(irq);
+ enable_irq(irq);
}
return 0;
* thread. All we do here is acknowledge and mask the interrupt and wakeup
* the kernel thread.
*/
-static void handle_twl4030_pih(unsigned int irq, struct irq_desc *desc)
+static irqreturn_t handle_twl4030_pih(int irq, void *devid)
{
/* Acknowledge, clear *AND* mask the interrupt... */
- desc->chip->ack(irq);
- complete(&irq_event);
-}
-
-static struct task_struct *start_twl4030_irq_thread(long irq)
-{
- struct task_struct *thread;
-
- init_completion(&irq_event);
- thread = kthread_run(twl4030_irq_thread, (void *)irq, "twl4030-irq");
- if (!thread)
- pr_err("twl4030: could not create irq %ld thread!\n", irq);
-
- return thread;
+ disable_irq_nosync(irq);
+ complete(devid);
+ return IRQ_HANDLED;
}
-
/*----------------------------------------------------------------------*/
/*
}
/* install an irq handler to demultiplex the TWL4030 interrupt */
- task = start_twl4030_irq_thread(irq_num);
- if (!task) {
- pr_err("twl4030: irq thread FAIL\n");
- status = -ESRCH;
- goto fail;
- }
- set_irq_data(irq_num, task);
- set_irq_chained_handler(irq_num, handle_twl4030_pih);
- return status;
+ init_completion(&irq_event);
+ status = request_irq(irq_num, handle_twl4030_pih, IRQF_DISABLED,
+ "TWL4030-PIH", &irq_event);
+ if (status < 0) {
+ pr_err("twl4030: could not claim irq%d: %d\n", irq_num, status);
+ goto fail_rqirq;
+ }
+
+ task = kthread_run(twl4030_irq_thread, (void *)irq_num, "twl4030-irq");
+ if (IS_ERR(task)) {
+ pr_err("twl4030: could not create irq %d thread!\n", irq_num);
+ status = PTR_ERR(task);
+ goto fail_kthread;
+ }
+ return status;
+fail_kthread:
+ free_irq(irq_num, &irq_event);
+fail_rqirq:
+ /* clean up twl4030_sih_setup */
fail:
for (i = irq_base; i < irq_end; i++)
set_irq_chip_and_handler(i, NULL, NULL);
if (!left)
return;
addr += len;
- flush_kernel_dcache_page(miter->page);
} while (sg_dwiter_next(miter));
}
return;
} else
sg_dwiter_write_slow(miter, data);
-
- if (miter->length == miter->consumed)
- flush_kernel_dcache_page(miter->page);
}
EXPORT_SYMBOL_GPL(cb710_sg_dwiter_write_next_block);
unsigned segment;
unsigned offset = (unsigned) off;
u8 *cp = bounce + 1;
+ int sr;
*cp = AT25_WREN;
status = spi_write(at25->spi, cp, 1);
timeout = jiffies + msecs_to_jiffies(EE_TIMEOUT);
retries = 0;
do {
- int sr;
sr = spi_w8r8(at25->spi, AT25_RDSR);
if (sr < 0 || (sr & AT25_SR_nRDY)) {
break;
} while (retries++ < 3 || time_before_eq(jiffies, timeout));
- if (time_after(jiffies, timeout)) {
+ if ((sr < 0) || (sr & AT25_SR_nRDY)) {
dev_err(&at25->spi->dev,
"write %d bytes offset %d, "
"timeout after %u msecs\n",
if (unlikely(data->blksz & 15 && (data->blocks != 1 || data->blksz != 8)))
return -EINVAL;
- sg_miter_start(&miter, data->sg, data->sg_len, 0);
+ sg_miter_start(&miter, data->sg, data->sg_len, SG_MITER_TO_SG);
cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
15, CB710_MMC_C2_READ_PIO_SIZE_MASK);
goto out;
}
out:
- cb710_sg_miter_stop_writing(&miter);
+ sg_miter_stop(&miter);
return err;
}
if (unlikely(data->blocks > 1 && data->blksz & 15))
return -EINVAL;
- sg_miter_start(&miter, data->sg, data->sg_len, 0);
+ sg_miter_start(&miter, data->sg, data->sg_len, SG_MITER_FROM_SG);
cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
0, CB710_MMC_C2_READ_PIO_SIZE_MASK);
set_bit(IMXMCI_PEND_STARTED_b, &host->pending_events);
tasklet_schedule(&host->tasklet);
- return IRQ_RETVAL(handled);;
+ return IRQ_RETVAL(handled);
}
static void imxmci_tasklet_fnc(unsigned long data)
u16 val[2] = {0, 0};
val[0] = mvsd_read(MVSD_FIFO);
val[1] = mvsd_read(MVSD_FIFO);
- memcpy(p, &val, s);
+ memcpy(p, ((void *)&val) + 4 - s, s);
s = 0;
intr_status = mvsd_read(MVSD_NOR_INTR_STATUS);
}
if (s < 4) {
if (s && (intr_status & MVSD_NOR_TX_AVAIL)) {
u16 val[2] = {0, 0};
- memcpy(&val, p, s);
+ memcpy(((void *)&val) + 4 - s, p, s);
mvsd_write(MVSD_FIFO, val[0]);
mvsd_write(MVSD_FIFO, val[1]);
s = 0;
if (data->flags & MMC_DATA_READ) {
host->dma_dir = DMA_FROM_DEVICE;
- dcmd = DCMD_INCTRGADDR | DCMD_FLOWTRG;
+ dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC;
DRCMR(host->dma_drcmrtx) = 0;
DRCMR(host->dma_drcmrrx) = host->dma | DRCMR_MAPVLD;
} else {
host->dma_dir = DMA_TO_DEVICE;
- dcmd = DCMD_INCSRCADDR | DCMD_FLOWSRC;
+ dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG;
DRCMR(host->dma_drcmrrx) = 0;
DRCMR(host->dma_drcmrtx) = host->dma | DRCMR_MAPVLD;
}
return of_host->clock;
}
+static unsigned int esdhc_get_min_clock(struct sdhci_host *host)
+{
+ struct sdhci_of_host *of_host = sdhci_priv(host);
+
+ return of_host->clock / 256 / 16;
+}
+
static unsigned int esdhc_get_timeout_clock(struct sdhci_host *host)
{
struct sdhci_of_host *of_host = sdhci_priv(host);
.set_clock = esdhc_set_clock,
.enable_dma = esdhc_enable_dma,
.get_max_clock = esdhc_get_max_clock,
+ .get_min_clock = esdhc_get_min_clock,
.get_timeout_clock = esdhc_get_timeout_clock,
},
};
return -ENODEV;
host = sdhci_alloc_host(&ofdev->dev, sizeof(*of_host));
- if (!host)
+ if (IS_ERR(host))
return -ENOMEM;
of_host = sdhci_priv(host);
}
if (!(host->flags & SDHCI_REQ_USE_DMA)) {
- sg_miter_start(&host->sg_miter,
- data->sg, data->sg_len, SG_MITER_ATOMIC);
+ int flags;
+
+ flags = SG_MITER_ATOMIC;
+ if (host->data->flags & MMC_DATA_READ)
+ flags |= SG_MITER_TO_SG;
+ else
+ flags |= SG_MITER_FROM_SG;
+ sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
host->blocks = data->blocks;
}
* Set host parameters.
*/
mmc->ops = &sdhci_ops;
- mmc->f_min = host->max_clk / 256;
+ if (host->ops->get_min_clock)
+ mmc->f_min = host->ops->get_min_clock(host);
+ else
+ mmc->f_min = host->max_clk / 256;
mmc->f_max = host->max_clk;
mmc->caps = MMC_CAP_SDIO_IRQ;
int (*enable_dma)(struct sdhci_host *host);
unsigned int (*get_max_clock)(struct sdhci_host *host);
+ unsigned int (*get_min_clock)(struct sdhci_host *host);
unsigned int (*get_timeout_clock)(struct sdhci_host *host);
};
flash->partitioned = 1;
return add_mtd_partitions(&flash->mtd, parts, nr_parts);
}
- } else if (data->nr_parts)
+ } else if (data && data->nr_parts)
dev_warn(&spi->dev, "ignoring %d default partitions on %s\n",
data->nr_parts, data->name);
BE VERY CAREFUL.
-config MTD_SBC8240
- tristate "Flash device on SBC8240"
- depends on MTD_JEDECPROBE && 8260
- help
- Flash access on the SBC8240 board from Wind River. See
- <http://www.windriver.com/products/sbc8240/>
-
config MTD_TQM8XXL
tristate "CFI Flash device mapped on TQM8XXL"
depends on MTD_CFI && TQM8xxL
obj-$(CONFIG_MTD_NETtel) += nettel.o
obj-$(CONFIG_MTD_SCB2_FLASH) += scb2_flash.o
obj-$(CONFIG_MTD_H720X) += h720x-flash.o
-obj-$(CONFIG_MTD_SBC8240) += sbc8240.o
obj-$(CONFIG_MTD_IXP4XX) += ixp4xx.o
obj-$(CONFIG_MTD_IXP2000) += ixp2000.o
obj-$(CONFIG_MTD_WRSBC8260) += wr_sbc82xx_flash.o
+++ /dev/null
-/*
- * Handle mapping of the flash memory access routines on the SBC8240 board.
- *
- * Carolyn Smith, Tektronix, Inc.
- *
- * This code is GPLed
- */
-
-/*
- * The SBC8240 has 2 flash banks.
- * Bank 0 is a 512 KiB AMD AM29F040B; 8 x 64 KiB sectors.
- * It contains the U-Boot code (7 sectors) and the environment (1 sector).
- * Bank 1 is 4 x 1 MiB AMD AM29LV800BT; 15 x 64 KiB sectors, 1 x 32 KiB sector,
- * 2 x 8 KiB sectors, 1 x 16 KiB sectors.
- * Both parts are JEDEC compatible.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <asm/io.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/cfi.h>
-
-#ifdef CONFIG_MTD_PARTITIONS
-#include <linux/mtd/partitions.h>
-#endif
-
-#define DEBUG
-
-#ifdef DEBUG
-# define debugk(fmt,args...) printk(fmt ,##args)
-#else
-# define debugk(fmt,args...)
-#endif
-
-
-#define WINDOW_ADDR0 0xFFF00000 /* 512 KiB */
-#define WINDOW_SIZE0 0x00080000
-#define BUSWIDTH0 1
-
-#define WINDOW_ADDR1 0xFF000000 /* 4 MiB */
-#define WINDOW_SIZE1 0x00400000
-#define BUSWIDTH1 8
-
-#define MSG_PREFIX "sbc8240:" /* prefix for our printk()'s */
-#define MTDID "sbc8240-%d" /* for mtdparts= partitioning */
-
-
-static struct map_info sbc8240_map[2] = {
- {
- .name = "sbc8240 Flash Bank #0",
- .size = WINDOW_SIZE0,
- .bankwidth = BUSWIDTH0,
- },
- {
- .name = "sbc8240 Flash Bank #1",
- .size = WINDOW_SIZE1,
- .bankwidth = BUSWIDTH1,
- }
-};
-
-#define NUM_FLASH_BANKS ARRAY_SIZE(sbc8240_map)
-
-/*
- * The following defines the partition layout of SBC8240 boards.
- *
- * See include/linux/mtd/partitions.h for definition of the
- * mtd_partition structure.
- *
- * The *_max_flash_size is the maximum possible mapped flash size
- * which is not necessarily the actual flash size. It must correspond
- * to the value specified in the mapping definition defined by the
- * "struct map_desc *_io_desc" for the corresponding machine.
- */
-
-#ifdef CONFIG_MTD_PARTITIONS
-
-static struct mtd_partition sbc8240_uboot_partitions [] = {
- /* Bank 0 */
- {
- .name = "U-boot", /* U-Boot Firmware */
- .offset = 0,
- .size = 0x00070000, /* 7 x 64 KiB sectors */
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
- {
- .name = "environment", /* U-Boot environment */
- .offset = 0x00070000,
- .size = 0x00010000, /* 1 x 64 KiB sector */
- },
-};
-
-static struct mtd_partition sbc8240_fs_partitions [] = {
- {
- .name = "jffs", /* JFFS filesystem */
- .offset = 0,
- .size = 0x003C0000, /* 4 * 15 * 64KiB */
- },
- {
- .name = "tmp32",
- .offset = 0x003C0000,
- .size = 0x00020000, /* 4 * 32KiB */
- },
- {
- .name = "tmp8a",
- .offset = 0x003E0000,
- .size = 0x00008000, /* 4 * 8KiB */
- },
- {
- .name = "tmp8b",
- .offset = 0x003E8000,
- .size = 0x00008000, /* 4 * 8KiB */
- },
- {
- .name = "tmp16",
- .offset = 0x003F0000,
- .size = 0x00010000, /* 4 * 16KiB */
- }
-};
-
-/* trivial struct to describe partition information */
-struct mtd_part_def
-{
- int nums;
- unsigned char *type;
- struct mtd_partition* mtd_part;
-};
-
-static struct mtd_info *sbc8240_mtd[NUM_FLASH_BANKS];
-static struct mtd_part_def sbc8240_part_banks[NUM_FLASH_BANKS];
-
-
-#endif /* CONFIG_MTD_PARTITIONS */
-
-
-static int __init init_sbc8240_mtd (void)
-{
- static struct _cjs {
- u_long addr;
- u_long size;
- } pt[NUM_FLASH_BANKS] = {
- {
- .addr = WINDOW_ADDR0,
- .size = WINDOW_SIZE0
- },
- {
- .addr = WINDOW_ADDR1,
- .size = WINDOW_SIZE1
- },
- };
-
- int devicesfound = 0;
- int i,j;
-
- for (i = 0; i < NUM_FLASH_BANKS; i++) {
- printk (KERN_NOTICE MSG_PREFIX
- "Probing 0x%08lx at 0x%08lx\n", pt[i].size, pt[i].addr);
-
- sbc8240_map[i].map_priv_1 =
- (unsigned long) ioremap (pt[i].addr, pt[i].size);
- if (!sbc8240_map[i].map_priv_1) {
- printk (MSG_PREFIX "failed to ioremap\n");
- for (j = 0; j < i; j++) {
- iounmap((void *) sbc8240_map[j].map_priv_1);
- sbc8240_map[j].map_priv_1 = 0;
- }
- return -EIO;
- }
- simple_map_init(&sbc8240_mtd[i]);
-
- sbc8240_mtd[i] = do_map_probe("jedec_probe", &sbc8240_map[i]);
-
- if (sbc8240_mtd[i]) {
- sbc8240_mtd[i]->module = THIS_MODULE;
- devicesfound++;
- } else {
- if (sbc8240_map[i].map_priv_1) {
- iounmap((void *) sbc8240_map[i].map_priv_1);
- sbc8240_map[i].map_priv_1 = 0;
- }
- }
- }
-
- if (!devicesfound) {
- printk(KERN_NOTICE MSG_PREFIX
- "No suppported flash chips found!\n");
- return -ENXIO;
- }
-
-#ifdef CONFIG_MTD_PARTITIONS
- sbc8240_part_banks[0].mtd_part = sbc8240_uboot_partitions;
- sbc8240_part_banks[0].type = "static image";
- sbc8240_part_banks[0].nums = ARRAY_SIZE(sbc8240_uboot_partitions);
- sbc8240_part_banks[1].mtd_part = sbc8240_fs_partitions;
- sbc8240_part_banks[1].type = "static file system";
- sbc8240_part_banks[1].nums = ARRAY_SIZE(sbc8240_fs_partitions);
-
- for (i = 0; i < NUM_FLASH_BANKS; i++) {
-
- if (!sbc8240_mtd[i]) continue;
- if (sbc8240_part_banks[i].nums == 0) {
- printk (KERN_NOTICE MSG_PREFIX
- "No partition info available, registering whole device\n");
- add_mtd_device(sbc8240_mtd[i]);
- } else {
- printk (KERN_NOTICE MSG_PREFIX
- "Using %s partition definition\n", sbc8240_part_banks[i].mtd_part->name);
- add_mtd_partitions (sbc8240_mtd[i],
- sbc8240_part_banks[i].mtd_part,
- sbc8240_part_banks[i].nums);
- }
- }
-#else
- printk(KERN_NOTICE MSG_PREFIX
- "Registering %d flash banks at once\n", devicesfound);
-
- for (i = 0; i < devicesfound; i++) {
- add_mtd_device(sbc8240_mtd[i]);
- }
-#endif /* CONFIG_MTD_PARTITIONS */
-
- return devicesfound == 0 ? -ENXIO : 0;
-}
-
-static void __exit cleanup_sbc8240_mtd (void)
-{
- int i;
-
- for (i = 0; i < NUM_FLASH_BANKS; i++) {
- if (sbc8240_mtd[i]) {
- del_mtd_device (sbc8240_mtd[i]);
- map_destroy (sbc8240_mtd[i]);
- }
- if (sbc8240_map[i].map_priv_1) {
- iounmap ((void *) sbc8240_map[i].map_priv_1);
- sbc8240_map[i].map_priv_1 = 0;
- }
- }
-}
-
-module_init (init_sbc8240_mtd);
-module_exit (cleanup_sbc8240_mtd);
-
-MODULE_LICENSE ("GPL");
-MODULE_AUTHOR ("Carolyn Smith <carolyn.smith@tektronix.com>");
-MODULE_DESCRIPTION ("MTD map driver for SBC8240 boards");
-
struct mtd_blktrans_ops *tr = dev->tr;
int ret = -ENODEV;
- if (!try_module_get(dev->mtd->owner))
+ if (!get_mtd_device(NULL, dev->mtd->index))
goto out;
if (!try_module_get(tr->owner))
ret = 0;
if (tr->open && (ret = tr->open(dev))) {
dev->mtd->usecount--;
- module_put(dev->mtd->owner);
+ put_mtd_device(dev->mtd);
out_tr:
module_put(tr->owner);
}
if (!ret) {
dev->mtd->usecount--;
- module_put(dev->mtd->owner);
+ put_mtd_device(dev->mtd);
module_put(tr->owner);
}
enum { STATE_EMPTY, STATE_CLEAN, STATE_DIRTY } cache_state;
} *mtdblks[MAX_MTD_DEVICES];
+static struct mutex mtdblks_lock;
+
/*
* Cache stuff...
*
DEBUG(MTD_DEBUG_LEVEL1,"mtdblock_open\n");
+ mutex_lock(&mtdblks_lock);
if (mtdblks[dev]) {
mtdblks[dev]->count++;
+ mutex_unlock(&mtdblks_lock);
return 0;
}
/* OK, it's not open. Create cache info for it */
mtdblk = kzalloc(sizeof(struct mtdblk_dev), GFP_KERNEL);
- if (!mtdblk)
+ if (!mtdblk) {
+ mutex_unlock(&mtdblks_lock);
return -ENOMEM;
+ }
mtdblk->count = 1;
mtdblk->mtd = mtd;
}
mtdblks[dev] = mtdblk;
+ mutex_unlock(&mtdblks_lock);
DEBUG(MTD_DEBUG_LEVEL1, "ok\n");
DEBUG(MTD_DEBUG_LEVEL1, "mtdblock_release\n");
+ mutex_lock(&mtdblks_lock);
+
mutex_lock(&mtdblk->cache_mutex);
write_cached_data(mtdblk);
mutex_unlock(&mtdblk->cache_mutex);
vfree(mtdblk->cache_data);
kfree(mtdblk);
}
+
+ mutex_unlock(&mtdblks_lock);
+
DEBUG(MTD_DEBUG_LEVEL1, "ok\n");
return 0;
static int __init init_mtdblock(void)
{
+ mutex_init(&mtdblks_lock);
+
return register_mtd_blktrans(&mtdblock_tr);
}
static int mtd_cls_suspend(struct device *dev, pm_message_t state)
{
struct mtd_info *mtd = dev_to_mtd(dev);
-
- if (mtd->suspend)
+
+ if (mtd && mtd->suspend)
return mtd->suspend(mtd);
else
return 0;
{
struct mtd_info *mtd = dev_to_mtd(dev);
- if (mtd->resume)
+ if (mtd && mtd->resume)
mtd->resume(mtd);
return 0;
}
mtd->dev.class = &mtd_class;
mtd->dev.devt = MTD_DEVT(i);
dev_set_name(&mtd->dev, "mtd%d", i);
+ dev_set_drvdata(&mtd->dev, mtd);
if (device_register(&mtd->dev) != 0) {
mtd_table[i] = NULL;
break;
buf64 = (uint64_t *)buf;
while (i < len/8) {
uint64_t x;
- asm ("ldrd\t%0, [%1]" : "=r" (x) : "r" (io_base));
+ asm volatile ("ldrd\t%0, [%1]" : "=&r" (x) : "r" (io_base));
buf64[i++] = x;
}
i *= 8;
int nftl_read_oob(struct mtd_info *mtd, loff_t offs, size_t len,
size_t *retlen, uint8_t *buf)
{
+ loff_t mask = mtd->writesize - 1;
struct mtd_oob_ops ops;
int res;
ops.mode = MTD_OOB_PLACE;
- ops.ooboffs = offs & (mtd->writesize - 1);
+ ops.ooboffs = offs & mask;
ops.ooblen = len;
ops.oobbuf = buf;
ops.datbuf = NULL;
- res = mtd->read_oob(mtd, offs & ~(mtd->writesize - 1), &ops);
+ res = mtd->read_oob(mtd, offs & ~mask, &ops);
*retlen = ops.oobretlen;
return res;
}
int nftl_write_oob(struct mtd_info *mtd, loff_t offs, size_t len,
size_t *retlen, uint8_t *buf)
{
+ loff_t mask = mtd->writesize - 1;
struct mtd_oob_ops ops;
int res;
ops.mode = MTD_OOB_PLACE;
- ops.ooboffs = offs & (mtd->writesize - 1);
+ ops.ooboffs = offs & mask;
ops.ooblen = len;
ops.oobbuf = buf;
ops.datbuf = NULL;
- res = mtd->write_oob(mtd, offs & ~(mtd->writesize - 1), &ops);
+ res = mtd->write_oob(mtd, offs & ~mask, &ops);
*retlen = ops.oobretlen;
return res;
}
static int nftl_write(struct mtd_info *mtd, loff_t offs, size_t len,
size_t *retlen, uint8_t *buf, uint8_t *oob)
{
+ loff_t mask = mtd->writesize - 1;
struct mtd_oob_ops ops;
int res;
ops.mode = MTD_OOB_PLACE;
- ops.ooboffs = offs;
+ ops.ooboffs = offs & mask;
ops.ooblen = mtd->oobsize;
ops.oobbuf = oob;
ops.datbuf = buf;
ops.len = len;
- res = mtd->write_oob(mtd, offs & ~(mtd->writesize - 1), &ops);
+ res = mtd->write_oob(mtd, offs & ~mask, &ops);
*retlen = ops.retlen;
return res;
}
if (ONENAND_CURRENT_BUFFERRAM(this)) {
if (area == ONENAND_DATARAM)
- return mtd->writesize;
+ return this->writesize;
if (area == ONENAND_SPARERAM)
return mtd->oobsize;
}
}
iounmap(c->onenand.base);
release_mem_region(c->phys_base, ONENAND_IO_SIZE);
+ gpmc_cs_free(c->gpmc_cs);
kfree(c);
return 0;
if (!ubi->volumes[i])
continue;
kfree(ubi->volumes[i]->eba_tbl);
+ ubi->volumes[i]->eba_tbl = NULL;
}
return err;
}
}
gluebi->vol_id = vi->vol_id;
+ gluebi->ubi_num = vi->ubi_num;
mtd->type = MTD_UBIVOLUME;
if (!di->ro_mode)
mtd->flags = MTD_WRITEABLE;
return -EINVAL;
}
- image_seq = be32_to_cpu(ech->ec);
+ /*
+ * Make sure that all PEBs have the same image sequence number.
+ * This allows us to detect situations when users flash UBI
+ * images incorrectly, so that the flash has the new UBI image
+ * and leftovers from the old one. This feature was added
+ * relatively recently, and the sequence number was always
+ * zero, because old UBI implementations always set it to zero.
+ * For this reasons, we do not panic if some PEBs have zero
+ * sequence number, while other PEBs have non-zero sequence
+ * number.
+ */
+ image_seq = be32_to_cpu(ech->image_seq);
if (!si->image_seq_set) {
ubi->image_seq = image_seq;
si->image_seq_set = 1;
- } else if (ubi->image_seq != image_seq) {
+ } else if (ubi->image_seq && ubi->image_seq != image_seq) {
ubi_err("bad image sequence number %d in PEB %d, "
"expected %d", image_seq, pnum, ubi->image_seq);
ubi_dbg_dump_ec_hdr(ech);
skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
vp->rx_ring[i].addr = isa_virt_to_bus(skb->data);
}
- vp->rx_ring[i - 1].next = isa_virt_to_bus(&vp->rx_ring[0]); /* Wrap the ring. */
+ if (i != 0)
+ vp->rx_ring[i - 1].next =
+ isa_virt_to_bus(&vp->rx_ring[0]); /* Wrap the ring. */
outl(isa_virt_to_bus(&vp->rx_ring[0]), ioaddr + UpListPtr);
}
if (vp->full_bus_master_tx) { /* Boomerang bus master Tx. */
CH_3C900B_FL,
CH_3C905_1,
CH_3C905_2,
+ CH_3C905B_TX,
CH_3C905B_1,
CH_3C905B_2,
PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_RESET, 64, },
{"3c905 Boomerang 100baseT4",
PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_RESET, 64, },
+ {"3C905B-TX Fast Etherlink XL PCI",
+ PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, },
{"3c905B Cyclone 100baseTx",
PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, },
{ 0x10B7, 0x900A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900B_FL },
{ 0x10B7, 0x9050, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905_1 },
{ 0x10B7, 0x9051, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905_2 },
+ { 0x10B7, 0x9054, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_TX },
{ 0x10B7, 0x9055, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_1 },
{ 0x10B7, 0x9058, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_2 },
&vp->tx_ring[vp->dirty_tx % TX_RING_SIZE]);
issue_and_wait(dev, DownStall);
for (i = 0; i < TX_RING_SIZE; i++) {
- pr_err(" %d: @%p length %8.8x status %8.8x\n", i,
- &vp->tx_ring[i],
+ unsigned int length;
+
#if DO_ZEROCOPY
- le32_to_cpu(vp->tx_ring[i].frag[0].length),
+ length = le32_to_cpu(vp->tx_ring[i].frag[0].length);
#else
- le32_to_cpu(vp->tx_ring[i].length),
+ length = le32_to_cpu(vp->tx_ring[i].length);
#endif
+ pr_err(" %d: @%p length %8.8x status %8.8x\n",
+ i, &vp->tx_ring[i], length,
le32_to_cpu(vp->tx_ring[i].status));
}
if (!stalled)
dma_addr_t mapping;
struct sk_buff *skb, *new_skb;
struct cp_desc *desc;
- unsigned buflen;
+ const unsigned buflen = cp->rx_buf_sz;
skb = cp->rx_skb[rx_tail];
BUG_ON(!skb);
pr_debug("%s: rx slot %d status 0x%x len %d\n",
dev->name, rx_tail, status, len);
- buflen = cp->rx_buf_sz + NET_IP_ALIGN;
- new_skb = netdev_alloc_skb(dev, buflen);
+ new_skb = netdev_alloc_skb(dev, buflen + NET_IP_ALIGN);
if (!new_skb) {
dev->stats.rx_dropped++;
goto rx_next;
.ndo_open = rtl8139_open,
.ndo_stop = rtl8139_close,
.ndo_get_stats = rtl8139_get_stats,
+ .ndo_change_mtu = eth_change_mtu,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = rtl8139_set_mac_address,
.ndo_start_xmit = rtl8139_start_xmit,
tristate "Micrel KSZ8842"
depends on HAS_IOMEM
help
- This platform driver is for Micrel KSZ8842 chip.
+ This platform driver is for Micrel KSZ8842 / KS8842
+ 2-port ethernet switch chip (managed, VLAN, QoS).
+
+config KS8851
+ tristate "Micrel KS8851 SPI"
+ depends on SPI
+ select MII
+ select CRC32
+ help
+ SPI driver for Micrel KS8851 SPI attached network chip.
config VIA_RHINE
tristate "VIA Rhine support"
obj-$(CONFIG_SKY2) += sky2.o
obj-$(CONFIG_SKFP) += skfp/
obj-$(CONFIG_KS8842) += ks8842.o
+obj-$(CONFIG_KS8851) += ks8851.o
obj-$(CONFIG_VIA_RHINE) += via-rhine.o
obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o
obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
help
Say Y here if you want to use built-in Ethernet ports
on IXP4xx processor.
+
+config W90P910_ETH
+ tristate "Nuvoton w90p910 Ethernet support"
+ depends on ARM && ARCH_W90X900
+ select PHYLIB
+ help
+ Say Y here if you want to use built-in Ethernet ports
+ on w90p910 processor.
obj-$(CONFIG_ARM_KS8695_ETHER) += ks8695net.o
obj-$(CONFIG_EP93XX_ETH) += ep93xx_eth.o
obj-$(CONFIG_IXP4XX_ETH) += ixp4xx_eth.o
+obj-$(CONFIG_W90P910_ETH) += w90p910_ether.o
#endif
static struct platform_driver at91ether_driver = {
- .probe = at91ether_probe,
.remove = __devexit_p(at91ether_remove),
.suspend = at91ether_suspend,
.resume = at91ether_resume,
static int __init at91ether_init(void)
{
- return platform_driver_register(&at91ether_driver);
+ return platform_driver_probe(&at91ether_driver, at91ether_probe);
}
static void __exit at91ether_exit(void)
.ndo_start_xmit = eth_xmit,
.ndo_set_multicast_list = eth_set_mcast_list,
.ndo_do_ioctl = eth_ioctl,
-
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
};
static int __devinit eth_init_one(struct platform_device *pdev)
--- /dev/null
+/*
+ * Copyright (c) 2008-2009 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/mii.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/ethtool.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+#define DRV_MODULE_NAME "w90p910-emc"
+#define DRV_MODULE_VERSION "0.1"
+
+/* Ethernet MAC Registers */
+#define REG_CAMCMR 0x00
+#define REG_CAMEN 0x04
+#define REG_CAMM_BASE 0x08
+#define REG_CAML_BASE 0x0c
+#define REG_TXDLSA 0x88
+#define REG_RXDLSA 0x8C
+#define REG_MCMDR 0x90
+#define REG_MIID 0x94
+#define REG_MIIDA 0x98
+#define REG_FFTCR 0x9C
+#define REG_TSDR 0xa0
+#define REG_RSDR 0xa4
+#define REG_DMARFC 0xa8
+#define REG_MIEN 0xac
+#define REG_MISTA 0xb0
+#define REG_CTXDSA 0xcc
+#define REG_CTXBSA 0xd0
+#define REG_CRXDSA 0xd4
+#define REG_CRXBSA 0xd8
+
+/* mac controller bit */
+#define MCMDR_RXON 0x01
+#define MCMDR_ACP (0x01 << 3)
+#define MCMDR_SPCRC (0x01 << 5)
+#define MCMDR_TXON (0x01 << 8)
+#define MCMDR_FDUP (0x01 << 18)
+#define MCMDR_ENMDC (0x01 << 19)
+#define MCMDR_OPMOD (0x01 << 20)
+#define SWR (0x01 << 24)
+
+/* cam command regiser */
+#define CAMCMR_AUP 0x01
+#define CAMCMR_AMP (0x01 << 1)
+#define CAMCMR_ABP (0x01 << 2)
+#define CAMCMR_CCAM (0x01 << 3)
+#define CAMCMR_ECMP (0x01 << 4)
+#define CAM0EN 0x01
+
+/* mac mii controller bit */
+#define MDCCR (0x0a << 20)
+#define PHYAD (0x01 << 8)
+#define PHYWR (0x01 << 16)
+#define PHYBUSY (0x01 << 17)
+#define PHYPRESP (0x01 << 18)
+#define CAM_ENTRY_SIZE 0x08
+
+/* rx and tx status */
+#define TXDS_TXCP (0x01 << 19)
+#define RXDS_CRCE (0x01 << 17)
+#define RXDS_PTLE (0x01 << 19)
+#define RXDS_RXGD (0x01 << 20)
+#define RXDS_ALIE (0x01 << 21)
+#define RXDS_RP (0x01 << 22)
+
+/* mac interrupt status*/
+#define MISTA_EXDEF (0x01 << 19)
+#define MISTA_TXBERR (0x01 << 24)
+#define MISTA_TDU (0x01 << 23)
+#define MISTA_RDU (0x01 << 10)
+#define MISTA_RXBERR (0x01 << 11)
+
+#define ENSTART 0x01
+#define ENRXINTR 0x01
+#define ENRXGD (0x01 << 4)
+#define ENRXBERR (0x01 << 11)
+#define ENTXINTR (0x01 << 16)
+#define ENTXCP (0x01 << 18)
+#define ENTXABT (0x01 << 21)
+#define ENTXBERR (0x01 << 24)
+#define ENMDC (0x01 << 19)
+#define PHYBUSY (0x01 << 17)
+#define MDCCR_VAL 0xa00000
+
+/* rx and tx owner bit */
+#define RX_OWEN_DMA (0x01 << 31)
+#define RX_OWEN_CPU (~(0x03 << 30))
+#define TX_OWEN_DMA (0x01 << 31)
+#define TX_OWEN_CPU (~(0x01 << 31))
+
+/* tx frame desc controller bit */
+#define MACTXINTEN 0x04
+#define CRCMODE 0x02
+#define PADDINGMODE 0x01
+
+/* fftcr controller bit */
+#define TXTHD (0x03 << 8)
+#define BLENGTH (0x01 << 20)
+
+/* global setting for driver */
+#define RX_DESC_SIZE 50
+#define TX_DESC_SIZE 10
+#define MAX_RBUFF_SZ 0x600
+#define MAX_TBUFF_SZ 0x600
+#define TX_TIMEOUT 50
+#define DELAY 1000
+#define CAM0 0x0
+
+static int w90p910_mdio_read(struct net_device *dev, int phy_id, int reg);
+
+struct w90p910_rxbd {
+ unsigned int sl;
+ unsigned int buffer;
+ unsigned int reserved;
+ unsigned int next;
+};
+
+struct w90p910_txbd {
+ unsigned int mode;
+ unsigned int buffer;
+ unsigned int sl;
+ unsigned int next;
+};
+
+struct recv_pdesc {
+ struct w90p910_rxbd desclist[RX_DESC_SIZE];
+ char recv_buf[RX_DESC_SIZE][MAX_RBUFF_SZ];
+};
+
+struct tran_pdesc {
+ struct w90p910_txbd desclist[TX_DESC_SIZE];
+ char tran_buf[RX_DESC_SIZE][MAX_TBUFF_SZ];
+};
+
+struct w90p910_ether {
+ struct recv_pdesc *rdesc;
+ struct recv_pdesc *rdesc_phys;
+ struct tran_pdesc *tdesc;
+ struct tran_pdesc *tdesc_phys;
+ struct net_device_stats stats;
+ struct platform_device *pdev;
+ struct sk_buff *skb;
+ struct clk *clk;
+ struct clk *rmiiclk;
+ struct mii_if_info mii;
+ struct timer_list check_timer;
+ void __iomem *reg;
+ unsigned int rxirq;
+ unsigned int txirq;
+ unsigned int cur_tx;
+ unsigned int cur_rx;
+ unsigned int finish_tx;
+ unsigned int rx_packets;
+ unsigned int rx_bytes;
+ unsigned int start_tx_ptr;
+ unsigned int start_rx_ptr;
+ unsigned int linkflag;
+ spinlock_t lock;
+};
+
+static void update_linkspeed_register(struct net_device *dev,
+ unsigned int speed, unsigned int duplex)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+ unsigned int val;
+
+ val = __raw_readl(ether->reg + REG_MCMDR);
+
+ if (speed == SPEED_100) {
+ /* 100 full/half duplex */
+ if (duplex == DUPLEX_FULL) {
+ val |= (MCMDR_OPMOD | MCMDR_FDUP);
+ } else {
+ val |= MCMDR_OPMOD;
+ val &= ~MCMDR_FDUP;
+ }
+ } else {
+ /* 10 full/half duplex */
+ if (duplex == DUPLEX_FULL) {
+ val |= MCMDR_FDUP;
+ val &= ~MCMDR_OPMOD;
+ } else {
+ val &= ~(MCMDR_FDUP | MCMDR_OPMOD);
+ }
+ }
+
+ __raw_writel(val, ether->reg + REG_MCMDR);
+}
+
+static void update_linkspeed(struct net_device *dev)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+ struct platform_device *pdev;
+ unsigned int bmsr, bmcr, lpa, speed, duplex;
+
+ pdev = ether->pdev;
+
+ if (!mii_link_ok(ðer->mii)) {
+ ether->linkflag = 0x0;
+ netif_carrier_off(dev);
+ dev_warn(&pdev->dev, "%s: Link down.\n", dev->name);
+ return;
+ }
+
+ if (ether->linkflag == 1)
+ return;
+
+ bmsr = w90p910_mdio_read(dev, ether->mii.phy_id, MII_BMSR);
+ bmcr = w90p910_mdio_read(dev, ether->mii.phy_id, MII_BMCR);
+
+ if (bmcr & BMCR_ANENABLE) {
+ if (!(bmsr & BMSR_ANEGCOMPLETE))
+ return;
+
+ lpa = w90p910_mdio_read(dev, ether->mii.phy_id, MII_LPA);
+
+ if ((lpa & LPA_100FULL) || (lpa & LPA_100HALF))
+ speed = SPEED_100;
+ else
+ speed = SPEED_10;
+
+ if ((lpa & LPA_100FULL) || (lpa & LPA_10FULL))
+ duplex = DUPLEX_FULL;
+ else
+ duplex = DUPLEX_HALF;
+
+ } else {
+ speed = (bmcr & BMCR_SPEED100) ? SPEED_100 : SPEED_10;
+ duplex = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;
+ }
+
+ update_linkspeed_register(dev, speed, duplex);
+
+ dev_info(&pdev->dev, "%s: Link now %i-%s\n", dev->name, speed,
+ (duplex == DUPLEX_FULL) ? "FullDuplex" : "HalfDuplex");
+ ether->linkflag = 0x01;
+
+ netif_carrier_on(dev);
+}
+
+static void w90p910_check_link(unsigned long dev_id)
+{
+ struct net_device *dev = (struct net_device *) dev_id;
+ struct w90p910_ether *ether = netdev_priv(dev);
+
+ update_linkspeed(dev);
+ mod_timer(ðer->check_timer, jiffies + msecs_to_jiffies(1000));
+}
+
+static void w90p910_write_cam(struct net_device *dev,
+ unsigned int x, unsigned char *pval)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+ unsigned int msw, lsw;
+
+ msw = (pval[0] << 24) | (pval[1] << 16) | (pval[2] << 8) | pval[3];
+
+ lsw = (pval[4] << 24) | (pval[5] << 16);
+
+ __raw_writel(lsw, ether->reg + REG_CAML_BASE + x * CAM_ENTRY_SIZE);
+ __raw_writel(msw, ether->reg + REG_CAMM_BASE + x * CAM_ENTRY_SIZE);
+}
+
+static void w90p910_init_desc(struct net_device *dev)
+{
+ struct w90p910_ether *ether;
+ struct w90p910_txbd *tdesc, *tdesc_phys;
+ struct w90p910_rxbd *rdesc, *rdesc_phys;
+ unsigned int i, j;
+
+ ether = netdev_priv(dev);
+
+ ether->tdesc = (struct tran_pdesc *)
+ dma_alloc_coherent(NULL, sizeof(struct tran_pdesc),
+ (dma_addr_t *) ðer->tdesc_phys, GFP_KERNEL);
+
+ ether->rdesc = (struct recv_pdesc *)
+ dma_alloc_coherent(NULL, sizeof(struct recv_pdesc),
+ (dma_addr_t *) ðer->rdesc_phys, GFP_KERNEL);
+
+ for (i = 0; i < TX_DESC_SIZE; i++) {
+ tdesc = &(ether->tdesc->desclist[i]);
+
+ j = ((i + 1) / TX_DESC_SIZE);
+
+ if (j != 0) {
+ tdesc_phys = &(ether->tdesc_phys->desclist[0]);
+ ether->start_tx_ptr = (unsigned int)tdesc_phys;
+ tdesc->next = (unsigned int)ether->start_tx_ptr;
+ } else {
+ tdesc_phys = &(ether->tdesc_phys->desclist[i+1]);
+ tdesc->next = (unsigned int)tdesc_phys;
+ }
+
+ tdesc->buffer = (unsigned int)ether->tdesc_phys->tran_buf[i];
+ tdesc->sl = 0;
+ tdesc->mode = 0;
+ }
+
+ for (i = 0; i < RX_DESC_SIZE; i++) {
+ rdesc = &(ether->rdesc->desclist[i]);
+
+ j = ((i + 1) / RX_DESC_SIZE);
+
+ if (j != 0) {
+ rdesc_phys = &(ether->rdesc_phys->desclist[0]);
+ ether->start_rx_ptr = (unsigned int)rdesc_phys;
+ rdesc->next = (unsigned int)ether->start_rx_ptr;
+ } else {
+ rdesc_phys = &(ether->rdesc_phys->desclist[i+1]);
+ rdesc->next = (unsigned int)rdesc_phys;
+ }
+
+ rdesc->sl = RX_OWEN_DMA;
+ rdesc->buffer = (unsigned int)ether->rdesc_phys->recv_buf[i];
+ }
+}
+
+static void w90p910_set_fifo_threshold(struct net_device *dev)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+ unsigned int val;
+
+ val = TXTHD | BLENGTH;
+ __raw_writel(val, ether->reg + REG_FFTCR);
+}
+
+static void w90p910_return_default_idle(struct net_device *dev)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+ unsigned int val;
+
+ val = __raw_readl(ether->reg + REG_MCMDR);
+ val |= SWR;
+ __raw_writel(val, ether->reg + REG_MCMDR);
+}
+
+static void w90p910_trigger_rx(struct net_device *dev)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+
+ __raw_writel(ENSTART, ether->reg + REG_RSDR);
+}
+
+static void w90p910_trigger_tx(struct net_device *dev)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+
+ __raw_writel(ENSTART, ether->reg + REG_TSDR);
+}
+
+static void w90p910_enable_mac_interrupt(struct net_device *dev)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+ unsigned int val;
+
+ val = ENTXINTR | ENRXINTR | ENRXGD | ENTXCP;
+ val |= ENTXBERR | ENRXBERR | ENTXABT;
+
+ __raw_writel(val, ether->reg + REG_MIEN);
+}
+
+static void w90p910_get_and_clear_int(struct net_device *dev,
+ unsigned int *val)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+
+ *val = __raw_readl(ether->reg + REG_MISTA);
+ __raw_writel(*val, ether->reg + REG_MISTA);
+}
+
+static void w90p910_set_global_maccmd(struct net_device *dev)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+ unsigned int val;
+
+ val = __raw_readl(ether->reg + REG_MCMDR);
+ val |= MCMDR_SPCRC | MCMDR_ENMDC | MCMDR_ACP | ENMDC;
+ __raw_writel(val, ether->reg + REG_MCMDR);
+}
+
+static void w90p910_enable_cam(struct net_device *dev)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+ unsigned int val;
+
+ w90p910_write_cam(dev, CAM0, dev->dev_addr);
+
+ val = __raw_readl(ether->reg + REG_CAMEN);
+ val |= CAM0EN;
+ __raw_writel(val, ether->reg + REG_CAMEN);
+}
+
+static void w90p910_enable_cam_command(struct net_device *dev)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+ unsigned int val;
+
+ val = CAMCMR_ECMP | CAMCMR_ABP | CAMCMR_AMP;
+ __raw_writel(val, ether->reg + REG_CAMCMR);
+}
+
+static void w90p910_enable_tx(struct net_device *dev, unsigned int enable)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+ unsigned int val;
+
+ val = __raw_readl(ether->reg + REG_MCMDR);
+
+ if (enable)
+ val |= MCMDR_TXON;
+ else
+ val &= ~MCMDR_TXON;
+
+ __raw_writel(val, ether->reg + REG_MCMDR);
+}
+
+static void w90p910_enable_rx(struct net_device *dev, unsigned int enable)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+ unsigned int val;
+
+ val = __raw_readl(ether->reg + REG_MCMDR);
+
+ if (enable)
+ val |= MCMDR_RXON;
+ else
+ val &= ~MCMDR_RXON;
+
+ __raw_writel(val, ether->reg + REG_MCMDR);
+}
+
+static void w90p910_set_curdest(struct net_device *dev)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+
+ __raw_writel(ether->start_rx_ptr, ether->reg + REG_RXDLSA);
+ __raw_writel(ether->start_tx_ptr, ether->reg + REG_TXDLSA);
+}
+
+static void w90p910_reset_mac(struct net_device *dev)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+
+ spin_lock(ðer->lock);
+
+ w90p910_enable_tx(dev, 0);
+ w90p910_enable_rx(dev, 0);
+ w90p910_set_fifo_threshold(dev);
+ w90p910_return_default_idle(dev);
+
+ if (!netif_queue_stopped(dev))
+ netif_stop_queue(dev);
+
+ w90p910_init_desc(dev);
+
+ dev->trans_start = jiffies;
+ ether->cur_tx = 0x0;
+ ether->finish_tx = 0x0;
+ ether->cur_rx = 0x0;
+
+ w90p910_set_curdest(dev);
+ w90p910_enable_cam(dev);
+ w90p910_enable_cam_command(dev);
+ w90p910_enable_mac_interrupt(dev);
+ w90p910_enable_tx(dev, 1);
+ w90p910_enable_rx(dev, 1);
+ w90p910_trigger_tx(dev);
+ w90p910_trigger_rx(dev);
+
+ dev->trans_start = jiffies;
+
+ if (netif_queue_stopped(dev))
+ netif_wake_queue(dev);
+
+ spin_unlock(ðer->lock);
+}
+
+static void w90p910_mdio_write(struct net_device *dev,
+ int phy_id, int reg, int data)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+ struct platform_device *pdev;
+ unsigned int val, i;
+
+ pdev = ether->pdev;
+
+ __raw_writel(data, ether->reg + REG_MIID);
+
+ val = (phy_id << 0x08) | reg;
+ val |= PHYBUSY | PHYWR | MDCCR_VAL;
+ __raw_writel(val, ether->reg + REG_MIIDA);
+
+ for (i = 0; i < DELAY; i++) {
+ if ((__raw_readl(ether->reg + REG_MIIDA) & PHYBUSY) == 0)
+ break;
+ }
+
+ if (i == DELAY)
+ dev_warn(&pdev->dev, "mdio write timed out\n");
+}
+
+static int w90p910_mdio_read(struct net_device *dev, int phy_id, int reg)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+ struct platform_device *pdev;
+ unsigned int val, i, data;
+
+ pdev = ether->pdev;
+
+ val = (phy_id << 0x08) | reg;
+ val |= PHYBUSY | MDCCR_VAL;
+ __raw_writel(val, ether->reg + REG_MIIDA);
+
+ for (i = 0; i < DELAY; i++) {
+ if ((__raw_readl(ether->reg + REG_MIIDA) & PHYBUSY) == 0)
+ break;
+ }
+
+ if (i == DELAY) {
+ dev_warn(&pdev->dev, "mdio read timed out\n");
+ data = 0xffff;
+ } else {
+ data = __raw_readl(ether->reg + REG_MIID);
+ }
+
+ return data;
+}
+
+static int set_mac_address(struct net_device *dev, void *addr)
+{
+ struct sockaddr *address = addr;
+
+ if (!is_valid_ether_addr(address->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(dev->dev_addr, address->sa_data, dev->addr_len);
+ w90p910_write_cam(dev, CAM0, dev->dev_addr);
+
+ return 0;
+}
+
+static int w90p910_ether_close(struct net_device *dev)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+
+ dma_free_writecombine(NULL, sizeof(struct w90p910_rxbd),
+ ether->rdesc, (dma_addr_t)ether->rdesc_phys);
+ dma_free_writecombine(NULL, sizeof(struct w90p910_txbd),
+ ether->tdesc, (dma_addr_t)ether->tdesc_phys);
+
+ netif_stop_queue(dev);
+
+ del_timer_sync(ðer->check_timer);
+ clk_disable(ether->rmiiclk);
+ clk_disable(ether->clk);
+
+ free_irq(ether->txirq, dev);
+ free_irq(ether->rxirq, dev);
+
+ return 0;
+}
+
+static struct net_device_stats *w90p910_ether_stats(struct net_device *dev)
+{
+ struct w90p910_ether *ether;
+
+ ether = netdev_priv(dev);
+
+ return ðer->stats;
+}
+
+static int w90p910_send_frame(struct net_device *dev,
+ unsigned char *data, int length)
+{
+ struct w90p910_ether *ether;
+ struct w90p910_txbd *txbd;
+ struct platform_device *pdev;
+ unsigned char *buffer;
+
+ ether = netdev_priv(dev);
+ pdev = ether->pdev;
+
+ txbd = ðer->tdesc->desclist[ether->cur_tx];
+ buffer = ether->tdesc->tran_buf[ether->cur_tx];
+ if (length > 1514) {
+ dev_err(&pdev->dev, "send data %d bytes, check it\n", length);
+ length = 1514;
+ }
+
+ txbd->sl = length & 0xFFFF;
+
+ memcpy(buffer, data, length);
+
+ txbd->mode = TX_OWEN_DMA | PADDINGMODE | CRCMODE | MACTXINTEN;
+
+ w90p910_enable_tx(dev, 1);
+
+ w90p910_trigger_tx(dev);
+
+ ether->cur_tx = (ether->cur_tx+1) % TX_DESC_SIZE;
+ txbd = ðer->tdesc->desclist[ether->cur_tx];
+
+ dev->trans_start = jiffies;
+
+ if (txbd->mode & TX_OWEN_DMA)
+ netif_stop_queue(dev);
+
+ return 0;
+}
+
+static int w90p910_ether_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+
+ if (!(w90p910_send_frame(dev, skb->data, skb->len))) {
+ ether->skb = skb;
+ dev_kfree_skb_irq(skb);
+ return 0;
+ }
+ return -1;
+}
+
+static irqreturn_t w90p910_tx_interrupt(int irq, void *dev_id)
+{
+ struct w90p910_ether *ether;
+ struct w90p910_txbd *txbd;
+ struct platform_device *pdev;
+ struct tran_pdesc *tran_pdesc;
+ struct net_device *dev;
+ unsigned int cur_entry, entry, status;
+
+ dev = (struct net_device *)dev_id;
+ ether = netdev_priv(dev);
+ pdev = ether->pdev;
+
+ spin_lock(ðer->lock);
+
+ w90p910_get_and_clear_int(dev, &status);
+
+ cur_entry = __raw_readl(ether->reg + REG_CTXDSA);
+
+ tran_pdesc = ether->tdesc_phys;
+ entry = (unsigned int)(&tran_pdesc->desclist[ether->finish_tx]);
+
+ while (entry != cur_entry) {
+ txbd = ðer->tdesc->desclist[ether->finish_tx];
+
+ ether->finish_tx = (ether->finish_tx + 1) % TX_DESC_SIZE;
+
+ if (txbd->sl & TXDS_TXCP) {
+ ether->stats.tx_packets++;
+ ether->stats.tx_bytes += txbd->sl & 0xFFFF;
+ } else {
+ ether->stats.tx_errors++;
+ }
+
+ txbd->sl = 0x0;
+ txbd->mode = 0x0;
+
+ if (netif_queue_stopped(dev))
+ netif_wake_queue(dev);
+
+ entry = (unsigned int)(&tran_pdesc->desclist[ether->finish_tx]);
+ }
+
+ if (status & MISTA_EXDEF) {
+ dev_err(&pdev->dev, "emc defer exceed interrupt\n");
+ } else if (status & MISTA_TXBERR) {
+ dev_err(&pdev->dev, "emc bus error interrupt\n");
+ w90p910_reset_mac(dev);
+ } else if (status & MISTA_TDU) {
+ if (netif_queue_stopped(dev))
+ netif_wake_queue(dev);
+ }
+
+ spin_unlock(ðer->lock);
+
+ return IRQ_HANDLED;
+}
+
+static void netdev_rx(struct net_device *dev)
+{
+ struct w90p910_ether *ether;
+ struct w90p910_rxbd *rxbd;
+ struct platform_device *pdev;
+ struct recv_pdesc *rdesc_phys;
+ struct sk_buff *skb;
+ unsigned char *data;
+ unsigned int length, status, val, entry;
+
+ ether = netdev_priv(dev);
+ pdev = ether->pdev;
+ rdesc_phys = ether->rdesc_phys;
+
+ rxbd = ðer->rdesc->desclist[ether->cur_rx];
+
+ do {
+ val = __raw_readl(ether->reg + REG_CRXDSA);
+ entry = (unsigned int)&rdesc_phys->desclist[ether->cur_rx];
+
+ if (val == entry)
+ break;
+
+ status = rxbd->sl;
+ length = status & 0xFFFF;
+
+ if (status & RXDS_RXGD) {
+ data = ether->rdesc->recv_buf[ether->cur_rx];
+ skb = dev_alloc_skb(length+2);
+ if (!skb) {
+ dev_err(&pdev->dev, "get skb buffer error\n");
+ ether->stats.rx_dropped++;
+ return;
+ }
+
+ skb->dev = dev;
+ skb_reserve(skb, 2);
+ skb_put(skb, length);
+ skb_copy_to_linear_data(skb, data, length);
+ skb->protocol = eth_type_trans(skb, dev);
+ ether->stats.rx_packets++;
+ ether->stats.rx_bytes += length;
+ netif_rx(skb);
+ } else {
+ ether->stats.rx_errors++;
+
+ if (status & RXDS_RP) {
+ dev_err(&pdev->dev, "rx runt err\n");
+ ether->stats.rx_length_errors++;
+ } else if (status & RXDS_CRCE) {
+ dev_err(&pdev->dev, "rx crc err\n");
+ ether->stats.rx_crc_errors++;
+ }
+
+ if (status & RXDS_ALIE) {
+ dev_err(&pdev->dev, "rx aligment err\n");
+ ether->stats.rx_frame_errors++;
+ } else if (status & RXDS_PTLE) {
+ dev_err(&pdev->dev, "rx longer err\n");
+ ether->stats.rx_over_errors++;
+ }
+ }
+
+ rxbd->sl = RX_OWEN_DMA;
+ rxbd->reserved = 0x0;
+ ether->cur_rx = (ether->cur_rx+1) % RX_DESC_SIZE;
+ rxbd = ðer->rdesc->desclist[ether->cur_rx];
+
+ dev->last_rx = jiffies;
+ } while (1);
+}
+
+static irqreturn_t w90p910_rx_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev;
+ struct w90p910_ether *ether;
+ struct platform_device *pdev;
+ unsigned int status;
+
+ dev = (struct net_device *)dev_id;
+ ether = netdev_priv(dev);
+ pdev = ether->pdev;
+
+ spin_lock(ðer->lock);
+
+ w90p910_get_and_clear_int(dev, &status);
+
+ if (status & MISTA_RDU) {
+ netdev_rx(dev);
+
+ w90p910_trigger_rx(dev);
+
+ spin_unlock(ðer->lock);
+ return IRQ_HANDLED;
+ } else if (status & MISTA_RXBERR) {
+ dev_err(&pdev->dev, "emc rx bus error\n");
+ w90p910_reset_mac(dev);
+ }
+
+ netdev_rx(dev);
+ spin_unlock(ðer->lock);
+ return IRQ_HANDLED;
+}
+
+static int w90p910_ether_open(struct net_device *dev)
+{
+ struct w90p910_ether *ether;
+ struct platform_device *pdev;
+
+ ether = netdev_priv(dev);
+ pdev = ether->pdev;
+
+ w90p910_reset_mac(dev);
+ w90p910_set_fifo_threshold(dev);
+ w90p910_set_curdest(dev);
+ w90p910_enable_cam(dev);
+ w90p910_enable_cam_command(dev);
+ w90p910_enable_mac_interrupt(dev);
+ w90p910_set_global_maccmd(dev);
+ w90p910_enable_rx(dev, 1);
+
+ ether->rx_packets = 0x0;
+ ether->rx_bytes = 0x0;
+
+ if (request_irq(ether->txirq, w90p910_tx_interrupt,
+ 0x0, pdev->name, dev)) {
+ dev_err(&pdev->dev, "register irq tx failed\n");
+ return -EAGAIN;
+ }
+
+ if (request_irq(ether->rxirq, w90p910_rx_interrupt,
+ 0x0, pdev->name, dev)) {
+ dev_err(&pdev->dev, "register irq rx failed\n");
+ return -EAGAIN;
+ }
+
+ mod_timer(ðer->check_timer, jiffies + msecs_to_jiffies(1000));
+ netif_start_queue(dev);
+ w90p910_trigger_rx(dev);
+
+ dev_info(&pdev->dev, "%s is OPENED\n", dev->name);
+
+ return 0;
+}
+
+static void w90p910_ether_set_multicast_list(struct net_device *dev)
+{
+ struct w90p910_ether *ether;
+ unsigned int rx_mode;
+
+ ether = netdev_priv(dev);
+
+ if (dev->flags & IFF_PROMISC)
+ rx_mode = CAMCMR_AUP | CAMCMR_AMP | CAMCMR_ABP | CAMCMR_ECMP;
+ else if ((dev->flags & IFF_ALLMULTI) || dev->mc_list)
+ rx_mode = CAMCMR_AMP | CAMCMR_ABP | CAMCMR_ECMP;
+ else
+ rx_mode = CAMCMR_ECMP | CAMCMR_ABP;
+ __raw_writel(rx_mode, ether->reg + REG_CAMCMR);
+}
+
+static int w90p910_ether_ioctl(struct net_device *dev,
+ struct ifreq *ifr, int cmd)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+ struct mii_ioctl_data *data = if_mii(ifr);
+
+ return generic_mii_ioctl(ðer->mii, data, cmd, NULL);
+}
+
+static void w90p910_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ strcpy(info->driver, DRV_MODULE_NAME);
+ strcpy(info->version, DRV_MODULE_VERSION);
+}
+
+static int w90p910_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+ return mii_ethtool_gset(ðer->mii, cmd);
+}
+
+static int w90p910_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+ return mii_ethtool_sset(ðer->mii, cmd);
+}
+
+static int w90p910_nway_reset(struct net_device *dev)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+ return mii_nway_restart(ðer->mii);
+}
+
+static u32 w90p910_get_link(struct net_device *dev)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+ return mii_link_ok(ðer->mii);
+}
+
+static const struct ethtool_ops w90p910_ether_ethtool_ops = {
+ .get_settings = w90p910_get_settings,
+ .set_settings = w90p910_set_settings,
+ .get_drvinfo = w90p910_get_drvinfo,
+ .nway_reset = w90p910_nway_reset,
+ .get_link = w90p910_get_link,
+};
+
+static const struct net_device_ops w90p910_ether_netdev_ops = {
+ .ndo_open = w90p910_ether_open,
+ .ndo_stop = w90p910_ether_close,
+ .ndo_start_xmit = w90p910_ether_start_xmit,
+ .ndo_get_stats = w90p910_ether_stats,
+ .ndo_set_multicast_list = w90p910_ether_set_multicast_list,
+ .ndo_set_mac_address = set_mac_address,
+ .ndo_do_ioctl = w90p910_ether_ioctl,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = eth_change_mtu,
+};
+
+static void __init get_mac_address(struct net_device *dev)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+ struct platform_device *pdev;
+ char addr[6];
+
+ pdev = ether->pdev;
+
+ addr[0] = 0x00;
+ addr[1] = 0x02;
+ addr[2] = 0xac;
+ addr[3] = 0x55;
+ addr[4] = 0x88;
+ addr[5] = 0xa8;
+
+ if (is_valid_ether_addr(addr))
+ memcpy(dev->dev_addr, &addr, 0x06);
+ else
+ dev_err(&pdev->dev, "invalid mac address\n");
+}
+
+static int w90p910_ether_setup(struct net_device *dev)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+
+ ether_setup(dev);
+ dev->netdev_ops = &w90p910_ether_netdev_ops;
+ dev->ethtool_ops = &w90p910_ether_ethtool_ops;
+
+ dev->tx_queue_len = 16;
+ dev->dma = 0x0;
+ dev->watchdog_timeo = TX_TIMEOUT;
+
+ get_mac_address(dev);
+
+ spin_lock_init(ðer->lock);
+
+ ether->cur_tx = 0x0;
+ ether->cur_rx = 0x0;
+ ether->finish_tx = 0x0;
+ ether->linkflag = 0x0;
+ ether->mii.phy_id = 0x01;
+ ether->mii.phy_id_mask = 0x1f;
+ ether->mii.reg_num_mask = 0x1f;
+ ether->mii.dev = dev;
+ ether->mii.mdio_read = w90p910_mdio_read;
+ ether->mii.mdio_write = w90p910_mdio_write;
+
+ setup_timer(ðer->check_timer, w90p910_check_link,
+ (unsigned long)dev);
+
+ return 0;
+}
+
+static int __devinit w90p910_ether_probe(struct platform_device *pdev)
+{
+ struct w90p910_ether *ether;
+ struct net_device *dev;
+ struct resource *res;
+ int error;
+
+ dev = alloc_etherdev(sizeof(struct w90p910_ether));
+ if (!dev)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "failed to get I/O memory\n");
+ error = -ENXIO;
+ goto failed_free;
+ }
+
+ res = request_mem_region(res->start, resource_size(res), pdev->name);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "failed to request I/O memory\n");
+ error = -EBUSY;
+ goto failed_free;
+ }
+
+ ether = netdev_priv(dev);
+
+ ether->reg = ioremap(res->start, resource_size(res));
+ if (ether->reg == NULL) {
+ dev_err(&pdev->dev, "failed to remap I/O memory\n");
+ error = -ENXIO;
+ goto failed_free_mem;
+ }
+
+ ether->txirq = platform_get_irq(pdev, 0);
+ if (ether->txirq < 0) {
+ dev_err(&pdev->dev, "failed to get ether tx irq\n");
+ error = -ENXIO;
+ goto failed_free_io;
+ }
+
+ ether->rxirq = platform_get_irq(pdev, 1);
+ if (ether->rxirq < 0) {
+ dev_err(&pdev->dev, "failed to get ether rx irq\n");
+ error = -ENXIO;
+ goto failed_free_txirq;
+ }
+
+ platform_set_drvdata(pdev, dev);
+
+ ether->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(ether->clk)) {
+ dev_err(&pdev->dev, "failed to get ether clock\n");
+ error = PTR_ERR(ether->clk);
+ goto failed_free_rxirq;
+ }
+
+ ether->rmiiclk = clk_get(&pdev->dev, "RMII");
+ if (IS_ERR(ether->rmiiclk)) {
+ dev_err(&pdev->dev, "failed to get ether clock\n");
+ error = PTR_ERR(ether->rmiiclk);
+ goto failed_put_clk;
+ }
+
+ ether->pdev = pdev;
+
+ w90p910_ether_setup(dev);
+
+ error = register_netdev(dev);
+ if (error != 0) {
+ dev_err(&pdev->dev, "Regiter EMC w90p910 FAILED\n");
+ error = -ENODEV;
+ goto failed_put_rmiiclk;
+ }
+
+ return 0;
+failed_put_rmiiclk:
+ clk_put(ether->rmiiclk);
+failed_put_clk:
+ clk_put(ether->clk);
+failed_free_rxirq:
+ free_irq(ether->rxirq, pdev);
+ platform_set_drvdata(pdev, NULL);
+failed_free_txirq:
+ free_irq(ether->txirq, pdev);
+failed_free_io:
+ iounmap(ether->reg);
+failed_free_mem:
+ release_mem_region(res->start, resource_size(res));
+failed_free:
+ free_netdev(dev);
+ return error;
+}
+
+static int __devexit w90p910_ether_remove(struct platform_device *pdev)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+ struct w90p910_ether *ether = netdev_priv(dev);
+
+ unregister_netdev(dev);
+ clk_put(ether->rmiiclk);
+ clk_put(ether->clk);
+ del_timer_sync(ðer->check_timer);
+ platform_set_drvdata(pdev, NULL);
+ free_netdev(dev);
+ return 0;
+}
+
+static struct platform_driver w90p910_ether_driver = {
+ .probe = w90p910_ether_probe,
+ .remove = __devexit_p(w90p910_ether_remove),
+ .driver = {
+ .name = "nuc900-emc",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init w90p910_ether_init(void)
+{
+ return platform_driver_register(&w90p910_ether_driver);
+}
+
+static void __exit w90p910_ether_exit(void)
+{
+ platform_driver_unregister(&w90p910_ether_driver);
+}
+
+module_init(w90p910_ether_init);
+module_exit(w90p910_ether_exit);
+
+MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
+MODULE_DESCRIPTION("w90p910 MAC driver!");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:nuc900-emc");
+
pos3 = mca_read_stored_pos( slot, 3 );
pos4 = mca_read_stored_pos( slot, 4 );
- for (l_i = 0; l_i < 0x09; l_i++)
+ for (l_i = 0; l_i < 8; l_i++)
if (( pos3 & 0x07) == at1700_ioaddr_pattern[l_i])
break;
ioaddr = at1700_mca_probe_list[l_i];
#define RRS_HDS_TYPE_DATA 2
#define RRS_IS_NO_HDS_TYPE(flag) \
- (((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK == 0)
+ ((((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK) == 0)
#define RRS_IS_HDS_HEAD(flag) \
- (((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK == \
+ ((((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK) == \
RRS_HDS_TYPE_HEAD)
#define RRS_IS_HDS_DATA(flag) \
- (((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK == \
+ ((((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK) == \
RRS_HDS_TYPE_DATA)
/* rrs word 3 bit 0:31 */
#define RRS_PACKET_TYPE_802_3 1
#define RRS_PACKET_TYPE_ETH 0
#define RRS_PACKET_IS_ETH(word) \
- (((word) >> RRS_PACKET_TYPE_SHIFT) & RRS_PACKET_TYPE_MASK == \
+ ((((word) >> RRS_PACKET_TYPE_SHIFT) & RRS_PACKET_TYPE_MASK) == \
RRS_PACKET_TYPE_ETH)
#define RRS_RXD_IS_VALID(word) \
((((word) >> RRS_RXD_UPDATED_SHIFT) & RRS_RXD_UPDATED_MASK) == 1)
{
struct atl1c_adapter *adapter = netdev_priv(netdev);
- strncpy(drvinfo->driver, atl1c_driver_name, sizeof(drvinfo->driver));
- strncpy(drvinfo->version, atl1c_driver_version,
+ strlcpy(drvinfo->driver, atl1c_driver_name, sizeof(drvinfo->driver));
+ strlcpy(drvinfo->version, atl1c_driver_version,
sizeof(drvinfo->version));
- strncpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version));
- strncpy(drvinfo->bus_info, pci_name(adapter->pdev),
+ strlcpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version));
+ strlcpy(drvinfo->bus_info, pci_name(adapter->pdev),
sizeof(drvinfo->bus_info));
drvinfo->n_stats = 0;
drvinfo->testinfo_len = 0;
if (likely(RRS_RXD_IS_VALID(rrs->word3))) {
rfd_num = (rrs->word0 >> RRS_RX_RFD_CNT_SHIFT) &
RRS_RX_RFD_CNT_MASK;
- if (unlikely(rfd_num) != 1)
+ if (unlikely(rfd_num != 1))
/* TODO support mul rfd*/
if (netif_msg_rx_err(adapter))
dev_warn(&pdev->dev,
{
struct atl1_adapter *adapter = netdev_priv(netdev);
- strncpy(drvinfo->driver, ATLX_DRIVER_NAME, sizeof(drvinfo->driver));
- strncpy(drvinfo->version, ATLX_DRIVER_VERSION,
+ strlcpy(drvinfo->driver, ATLX_DRIVER_NAME, sizeof(drvinfo->driver));
+ strlcpy(drvinfo->version, ATLX_DRIVER_VERSION,
sizeof(drvinfo->version));
- strncpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version));
- strncpy(drvinfo->bus_info, pci_name(adapter->pdev),
+ strlcpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version));
+ strlcpy(drvinfo->bus_info, pci_name(adapter->pdev),
sizeof(drvinfo->bus_info));
drvinfo->eedump_len = ATL1_EEDUMP_LEN;
}
if (wol->wolopts & (WAKE_ARP | WAKE_MAGICSECURE))
return -EOPNOTSUPP;
- if (wol->wolopts & (WAKE_MCAST|WAKE_BCAST|WAKE_MCAST))
+ if (wol->wolopts & (WAKE_UCAST | WAKE_BCAST | WAKE_MCAST))
return -EOPNOTSUPP;
/* these settings will always override what we currently have */
int rc = NETDEV_TX_OK;
dma_addr_t mapping;
u32 len, entry, ctrl;
+ unsigned long flags;
len = skb->len;
- spin_lock_irq(&bp->lock);
+ spin_lock_irqsave(&bp->lock, flags);
/* This is a hard error, log it. */
if (unlikely(TX_BUFFS_AVAIL(bp) < 1)) {
dev->trans_start = jiffies;
out_unlock:
- spin_unlock_irq(&bp->lock);
+ spin_unlock_irqrestore(&bp->lock, flags);
return rc;
struct be_queue_info *rxq = &adapter->rx_obj.q;
struct be_rx_page_info *page_info;
u16 rxq_idx, i, num_rcvd, j;
- u32 pktsize, hdr_len, curr_frag_len;
+ u32 pktsize, hdr_len, curr_frag_len, size;
u8 *start;
rxq_idx = AMAP_GET_BITS(struct amap_eth_rx_compl, fragndx, rxcp);
}
/* More frags present for this completion */
- pktsize -= curr_frag_len; /* account for above copied frag */
+ size = pktsize;
for (i = 1, j = 0; i < num_rcvd; i++) {
+ size -= curr_frag_len;
index_inc(&rxq_idx, rxq->len);
page_info = get_rx_page_info(adapter, rxq_idx);
- curr_frag_len = min(pktsize, rx_frag_size);
+ curr_frag_len = min(size, rx_frag_size);
/* Coalesce all frags from the same physical page in one slot */
if (page_info->page_offset == 0) {
skb_shinfo(skb)->frags[j].size += curr_frag_len;
skb->len += curr_frag_len;
skb->data_len += curr_frag_len;
- pktsize -= curr_frag_len;
memset(page_info, 0, sizeof(*page_info));
}
struct bnx2_napi *bnapi = &bp->bnx2_napi[0];
struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
+ mutex_lock(&bp->cnic_lock);
cp->drv_state = 0;
bnapi->cnic_present = 0;
rcu_assign_pointer(bp->cnic_ops, NULL);
+ mutex_unlock(&bp->cnic_lock);
synchronize_rcu();
return 0;
}
struct cnic_ops *c_ops;
struct cnic_ctl_info info;
- rcu_read_lock();
- c_ops = rcu_dereference(bp->cnic_ops);
+ mutex_lock(&bp->cnic_lock);
+ c_ops = bp->cnic_ops;
if (c_ops) {
info.cmd = CNIC_CTL_STOP_CMD;
c_ops->cnic_ctl(bp->cnic_data, &info);
}
- rcu_read_unlock();
+ mutex_unlock(&bp->cnic_lock);
}
static void
struct cnic_ops *c_ops;
struct cnic_ctl_info info;
- rcu_read_lock();
- c_ops = rcu_dereference(bp->cnic_ops);
+ mutex_lock(&bp->cnic_lock);
+ c_ops = bp->cnic_ops;
if (c_ops) {
if (!(bp->flags & BNX2_FLAG_USING_MSIX)) {
struct bnx2_napi *bnapi = &bp->bnx2_napi[0];
info.cmd = CNIC_CTL_START_CMD;
c_ops->cnic_ctl(bp->cnic_data, &info);
}
- rcu_read_unlock();
+ mutex_unlock(&bp->cnic_lock);
}
#else
spin_lock_init(&bp->phy_lock);
spin_lock_init(&bp->indirect_lock);
+#ifdef BCM_CNIC
+ mutex_init(&bp->cnic_lock);
+#endif
INIT_WORK(&bp->reset_task, bnx2_reset_task);
dev->base_addr = dev->mem_start = pci_resource_start(pdev, 0);
u32 idle_chk_status_idx;
#ifdef BCM_CNIC
+ struct mutex cnic_lock;
struct cnic_eth_dev cnic_eth_dev;
#endif
u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded,
u8 *version, u16 len)
{
- struct bnx2x *bp = params->bp;
+ struct bnx2x *bp;
u32 ext_phy_type = 0;
u32 spirom_ver = 0;
u8 status = 0 ;
if (version == NULL || params == NULL)
return -EINVAL;
+ bp = params->bp;
spirom_ver = REG_RD(bp, params->shmem_base +
offsetof(struct shmem_region,
* ether type (eg ARPHRD_ETHER and ARPHRD_INFINIBAND) share the same bond
*/
if (bond->slave_cnt == 0) {
- if (slave_dev->type != ARPHRD_ETHER)
- bond_setup_by_slave(bond_dev, slave_dev);
+ if (bond_dev->type != slave_dev->type) {
+ dev_close(bond_dev);
+ pr_debug("%s: change device type from %d to %d\n",
+ bond_dev->name, bond_dev->type, slave_dev->type);
+ if (slave_dev->type != ARPHRD_ETHER)
+ bond_setup_by_slave(bond_dev, slave_dev);
+ else
+ ether_setup(bond_dev);
+ dev_open(bond_dev);
+ }
} else if (bond_dev->type != slave_dev->type) {
pr_err(DRV_NAME ": %s ether type (%d) is different "
"from other slaves (%d), can not enslave it.\n",
skb = dev_alloc_skb(sizeof(struct can_frame));
if (skb == NULL) {
err = -ENOMEM;
- goto out;
+ goto restart;
}
skb->dev = dev;
skb->protocol = htons(ETH_P_CAN);
stats->rx_packets++;
stats->rx_bytes += cf->can_dlc;
+restart:
dev_dbg(dev->dev.parent, "restarted\n");
priv->can_stats.restarts++;
/* Now restart the device */
err = priv->do_set_mode(dev, CAN_MODE_START);
-out:
netif_carrier_on(dev);
if (err)
dev_err(dev->dev.parent, "Error %d during restart", err);
return -EINVAL;
}
+ /* Switch carrier on if device was stopped while in bus-off state */
+ if (!netif_carrier_ok(dev))
+ netif_carrier_on(dev);
+
setup_timer(&priv->restart_timer, can_restart, (unsigned long)dev);
return 0;
return -EMSGSIZE;
}
+static int can_newlink(struct net_device *dev,
+ struct nlattr *tb[], struct nlattr *data[])
+{
+ return -EOPNOTSUPP;
+}
+
static struct rtnl_link_ops can_link_ops __read_mostly = {
.kind = "can",
.maxtype = IFLA_CAN_MAX,
.policy = can_policy,
.setup = can_setup,
+ .newlink = can_newlink,
.changelink = can_changelink,
.fill_info = can_fill_info,
.fill_xstats = can_fill_xstats,
#include <linux/can.h>
#include <linux/can/dev.h>
#include <linux/can/error.h>
-#include <linux/can/dev.h>
#include "sja1000.h"
return NULL;
}
+static inline void ulp_get(struct cnic_ulp_ops *ulp_ops)
+{
+ atomic_inc(&ulp_ops->ref_count);
+}
+
+static inline void ulp_put(struct cnic_ulp_ops *ulp_ops)
+{
+ atomic_dec(&ulp_ops->ref_count);
+}
+
static void cnic_ctx_wr(struct cnic_dev *dev, u32 cid_addr, u32 off, u32 val)
{
struct cnic_local *cp = dev->cnic_priv;
}
rcu_read_lock();
- ulp_ops = rcu_dereference(cp->ulp_ops[CNIC_ULP_ISCSI]);
+ ulp_ops = rcu_dereference(cnic_ulp_tbl[CNIC_ULP_ISCSI]);
if (ulp_ops)
ulp_ops->iscsi_nl_send_msg(cp->dev, msg_type, buf, len);
rcu_read_unlock();
return 0;
}
+static void cnic_uio_stop(void)
+{
+ struct cnic_dev *dev;
+
+ read_lock(&cnic_dev_lock);
+ list_for_each_entry(dev, &cnic_dev_list, list) {
+ struct cnic_local *cp = dev->cnic_priv;
+
+ if (cp->cnic_uinfo)
+ cnic_send_nlmsg(cp, ISCSI_KEVENT_IF_DOWN, NULL);
+ }
+ read_unlock(&cnic_dev_lock);
+}
+
int cnic_register_driver(int ulp_type, struct cnic_ulp_ops *ulp_ops)
{
struct cnic_dev *dev;
}
read_unlock(&cnic_dev_lock);
+ atomic_set(&ulp_ops->ref_count, 0);
rcu_assign_pointer(cnic_ulp_tbl[ulp_type], ulp_ops);
mutex_unlock(&cnic_lock);
int cnic_unregister_driver(int ulp_type)
{
struct cnic_dev *dev;
+ struct cnic_ulp_ops *ulp_ops;
+ int i = 0;
if (ulp_type >= MAX_CNIC_ULP_TYPE) {
printk(KERN_ERR PFX "cnic_unregister_driver: Bad type %d\n",
return -EINVAL;
}
mutex_lock(&cnic_lock);
- if (!cnic_ulp_tbl[ulp_type]) {
+ ulp_ops = cnic_ulp_tbl[ulp_type];
+ if (!ulp_ops) {
printk(KERN_ERR PFX "cnic_unregister_driver: Type %d has not "
"been registered\n", ulp_type);
goto out_unlock;
}
read_unlock(&cnic_dev_lock);
+ if (ulp_type == CNIC_ULP_ISCSI)
+ cnic_uio_stop();
+
rcu_assign_pointer(cnic_ulp_tbl[ulp_type], NULL);
mutex_unlock(&cnic_lock);
synchronize_rcu();
+ while ((atomic_read(&ulp_ops->ref_count) != 0) && (i < 20)) {
+ msleep(100);
+ i++;
+ }
+
+ if (atomic_read(&ulp_ops->ref_count) != 0)
+ printk(KERN_WARNING PFX "%s: Failed waiting for ref count to go"
+ " to zero.\n", dev->netdev->name);
return 0;
out_unlock:
static int cnic_unregister_device(struct cnic_dev *dev, int ulp_type)
{
struct cnic_local *cp = dev->cnic_priv;
+ int i = 0;
if (ulp_type >= MAX_CNIC_ULP_TYPE) {
printk(KERN_ERR PFX "cnic_unregister_device: Bad type %d\n",
synchronize_rcu();
+ while (test_bit(ULP_F_CALL_PENDING, &cp->ulp_flags[ulp_type]) &&
+ i < 20) {
+ msleep(100);
+ i++;
+ }
+ if (test_bit(ULP_F_CALL_PENDING, &cp->ulp_flags[ulp_type]))
+ printk(KERN_WARNING PFX "%s: Failed waiting for ULP up call"
+ " to complete.\n", dev->netdev->name);
+
return 0;
}
EXPORT_SYMBOL(cnic_unregister_driver);
int i = 0;
if (cp->cnic_uinfo) {
- cnic_send_nlmsg(cp, ISCSI_KEVENT_IF_DOWN, NULL);
while (cp->uio_dev != -1 && i < 15) {
msleep(100);
i++;
struct cnic_local *cp = dev->cnic_priv;
int if_type;
- rcu_read_lock();
+ if (cp->cnic_uinfo)
+ cnic_send_nlmsg(cp, ISCSI_KEVENT_IF_DOWN, NULL);
+
for (if_type = 0; if_type < MAX_CNIC_ULP_TYPE; if_type++) {
struct cnic_ulp_ops *ulp_ops;
- ulp_ops = rcu_dereference(cp->ulp_ops[if_type]);
- if (!ulp_ops)
+ mutex_lock(&cnic_lock);
+ ulp_ops = cp->ulp_ops[if_type];
+ if (!ulp_ops) {
+ mutex_unlock(&cnic_lock);
continue;
+ }
+ set_bit(ULP_F_CALL_PENDING, &cp->ulp_flags[if_type]);
+ mutex_unlock(&cnic_lock);
if (test_and_clear_bit(ULP_F_START, &cp->ulp_flags[if_type]))
ulp_ops->cnic_stop(cp->ulp_handle[if_type]);
+
+ clear_bit(ULP_F_CALL_PENDING, &cp->ulp_flags[if_type]);
}
- rcu_read_unlock();
}
static void cnic_ulp_start(struct cnic_dev *dev)
struct cnic_local *cp = dev->cnic_priv;
int if_type;
- rcu_read_lock();
for (if_type = 0; if_type < MAX_CNIC_ULP_TYPE; if_type++) {
struct cnic_ulp_ops *ulp_ops;
- ulp_ops = rcu_dereference(cp->ulp_ops[if_type]);
- if (!ulp_ops || !ulp_ops->cnic_start)
+ mutex_lock(&cnic_lock);
+ ulp_ops = cp->ulp_ops[if_type];
+ if (!ulp_ops || !ulp_ops->cnic_start) {
+ mutex_unlock(&cnic_lock);
continue;
+ }
+ set_bit(ULP_F_CALL_PENDING, &cp->ulp_flags[if_type]);
+ mutex_unlock(&cnic_lock);
if (!test_and_set_bit(ULP_F_START, &cp->ulp_flags[if_type]))
ulp_ops->cnic_start(cp->ulp_handle[if_type]);
+
+ clear_bit(ULP_F_CALL_PENDING, &cp->ulp_flags[if_type]);
}
- rcu_read_unlock();
}
static int cnic_ctl(void *data, struct cnic_ctl_info *info)
switch (info->cmd) {
case CNIC_CTL_STOP_CMD:
cnic_hold(dev);
- mutex_lock(&cnic_lock);
cnic_ulp_stop(dev);
cnic_stop_hw(dev);
- mutex_unlock(&cnic_lock);
cnic_put(dev);
break;
case CNIC_CTL_START_CMD:
cnic_hold(dev);
- mutex_lock(&cnic_lock);
if (!cnic_start_hw(dev))
cnic_ulp_start(dev);
- mutex_unlock(&cnic_lock);
cnic_put(dev);
break;
default:
int i;
struct cnic_local *cp = dev->cnic_priv;
- rcu_read_lock();
for (i = 0; i < MAX_CNIC_ULP_TYPE_EXT; i++) {
struct cnic_ulp_ops *ulp_ops;
- ulp_ops = rcu_dereference(cnic_ulp_tbl[i]);
- if (!ulp_ops || !ulp_ops->cnic_init)
+ mutex_lock(&cnic_lock);
+ ulp_ops = cnic_ulp_tbl[i];
+ if (!ulp_ops || !ulp_ops->cnic_init) {
+ mutex_unlock(&cnic_lock);
continue;
+ }
+ ulp_get(ulp_ops);
+ mutex_unlock(&cnic_lock);
if (!test_and_set_bit(ULP_F_INIT, &cp->ulp_flags[i]))
ulp_ops->cnic_init(dev);
+ ulp_put(ulp_ops);
}
- rcu_read_unlock();
}
static void cnic_ulp_exit(struct cnic_dev *dev)
int i;
struct cnic_local *cp = dev->cnic_priv;
- rcu_read_lock();
for (i = 0; i < MAX_CNIC_ULP_TYPE_EXT; i++) {
struct cnic_ulp_ops *ulp_ops;
- ulp_ops = rcu_dereference(cnic_ulp_tbl[i]);
- if (!ulp_ops || !ulp_ops->cnic_exit)
+ mutex_lock(&cnic_lock);
+ ulp_ops = cnic_ulp_tbl[i];
+ if (!ulp_ops || !ulp_ops->cnic_exit) {
+ mutex_unlock(&cnic_lock);
continue;
+ }
+ ulp_get(ulp_ops);
+ mutex_unlock(&cnic_lock);
if (test_and_clear_bit(ULP_F_INIT, &cp->ulp_flags[i]))
ulp_ops->cnic_exit(dev);
+ ulp_put(ulp_ops);
}
- rcu_read_unlock();
}
static int cnic_cm_offload_pg(struct cnic_sock *csk)
return 0;
}
-static int cnic_start_hw(struct cnic_dev *dev)
+static int cnic_register_netdev(struct cnic_dev *dev)
{
struct cnic_local *cp = dev->cnic_priv;
struct cnic_eth_dev *ethdev = cp->ethdev;
int err;
- if (test_bit(CNIC_F_CNIC_UP, &dev->flags))
- return -EALREADY;
+ if (!ethdev)
+ return -ENODEV;
+
+ if (ethdev->drv_state & CNIC_DRV_STATE_REGD)
+ return 0;
err = ethdev->drv_register_cnic(dev->netdev, cp->cnic_ops, dev);
- if (err) {
+ if (err)
printk(KERN_ERR PFX "%s: register_cnic failed\n",
dev->netdev->name);
- goto err2;
- }
+
+ return err;
+}
+
+static void cnic_unregister_netdev(struct cnic_dev *dev)
+{
+ struct cnic_local *cp = dev->cnic_priv;
+ struct cnic_eth_dev *ethdev = cp->ethdev;
+
+ if (!ethdev)
+ return;
+
+ ethdev->drv_unregister_cnic(dev->netdev);
+}
+
+static int cnic_start_hw(struct cnic_dev *dev)
+{
+ struct cnic_local *cp = dev->cnic_priv;
+ struct cnic_eth_dev *ethdev = cp->ethdev;
+ int err;
+
+ if (test_bit(CNIC_F_CNIC_UP, &dev->flags))
+ return -EALREADY;
dev->regview = ethdev->io_base;
cp->chip_id = ethdev->chip_id;
return 0;
err1:
- ethdev->drv_unregister_cnic(dev->netdev);
cp->free_resc(dev);
pci_dev_put(dev->pcidev);
-err2:
return err;
}
static void cnic_stop_bnx2_hw(struct cnic_dev *dev)
{
- struct cnic_local *cp = dev->cnic_priv;
- struct cnic_eth_dev *ethdev = cp->ethdev;
-
cnic_disable_bnx2_int_sync(dev);
cnic_reg_wr_ind(dev, BNX2_CP_SCRATCH + 0x20, 0);
cnic_setup_5709_context(dev, 0);
cnic_free_irq(dev);
- ethdev->drv_unregister_cnic(dev->netdev);
-
cnic_free_resc(dev);
}
probe = symbol_get(bnx2_cnic_probe);
if (probe) {
ethdev = (*probe)(dev);
- symbol_put_addr(probe);
+ symbol_put(bnx2_cnic_probe);
}
if (!ethdev)
return NULL;
else if (event == NETDEV_UNREGISTER)
cnic_ulp_exit(dev);
else if (event == NETDEV_UP) {
- mutex_lock(&cnic_lock);
+ if (cnic_register_netdev(dev) != 0) {
+ cnic_put(dev);
+ goto done;
+ }
if (!cnic_start_hw(dev))
cnic_ulp_start(dev);
- mutex_unlock(&cnic_lock);
}
rcu_read_lock();
rcu_read_unlock();
if (event == NETDEV_GOING_DOWN) {
- mutex_lock(&cnic_lock);
cnic_ulp_stop(dev);
cnic_stop_hw(dev);
- mutex_unlock(&cnic_lock);
+ cnic_unregister_netdev(dev);
} else if (event == NETDEV_UNREGISTER) {
write_lock(&cnic_dev_lock);
list_del_init(&dev->list);
}
cnic_ulp_exit(dev);
+ cnic_unregister_netdev(dev);
list_del_init(&dev->list);
cnic_free_dev(dev);
}
unsigned long ulp_flags[MAX_CNIC_ULP_TYPE];
#define ULP_F_INIT 0
#define ULP_F_START 1
+#define ULP_F_CALL_PENDING 2
struct cnic_ulp_ops *ulp_ops[MAX_CNIC_ULP_TYPE];
/* protected by ulp_lock */
void (*iscsi_nl_send_msg)(struct cnic_dev *dev, u32 msg_type,
char *data, u16 data_size);
struct module *owner;
+ atomic_t ref_count;
};
extern int cnic_register_driver(int ulp_type, struct cnic_ulp_ops *ulp_ops);
static int net_send_packet(struct sk_buff *skb, struct net_device *dev)
{
struct net_local *lp = netdev_priv(dev);
+ unsigned long flags;
if (net_debug > 3) {
printk("%s: sent %d byte packet of type %x\n",
ask the chip to start transmitting before the
whole packet has been completely uploaded. */
- spin_lock_irq(&lp->lock);
+ spin_lock_irqsave(&lp->lock, flags);
netif_stop_queue(dev);
/* initiate a transmit sequence */
* we're waiting for TxOk, so return 1 and requeue this packet.
*/
- spin_unlock_irq(&lp->lock);
+ spin_unlock_irqrestore(&lp->lock, flags);
if (net_debug) printk("cs89x0: Tx buffer not free!\n");
return NETDEV_TX_BUSY;
}
/* Write the contents of the packet */
writewords(dev->base_addr, TX_FRAME_PORT,skb->data,(skb->len+1) >>1);
- spin_unlock_irq(&lp->lock);
+ spin_unlock_irqrestore(&lp->lock, flags);
lp->stats.tx_bytes += skb->len;
dev->trans_start = jiffies;
dev_kfree_skb (skb);
if (!other_ports)
schedule_chk_task(adapter);
+ cxgb3_event_notify(&adapter->tdev, OFFLOAD_PORT_UP, pi->port_id);
return 0;
}
if (!adapter->open_device_map)
cxgb_down(adapter);
+ cxgb3_event_notify(&adapter->tdev, OFFLOAD_PORT_DOWN, pi->port_id);
return 0;
}
if (is_offload(adapter) &&
test_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map)) {
- cxgb3_err_notify(&adapter->tdev, OFFLOAD_STATUS_DOWN, 0);
+ cxgb3_event_notify(&adapter->tdev, OFFLOAD_STATUS_DOWN, 0);
offload_close(&adapter->tdev);
}
}
if (is_offload(adapter) && !ofld_disable)
- cxgb3_err_notify(&adapter->tdev, OFFLOAD_STATUS_UP, 0);
+ cxgb3_event_notify(&adapter->tdev, OFFLOAD_STATUS_UP, 0);
}
/*
mutex_unlock(&cxgb3_db_lock);
}
-void cxgb3_err_notify(struct t3cdev *tdev, u32 status, u32 error)
+void cxgb3_event_notify(struct t3cdev *tdev, u32 event, u32 port)
{
struct cxgb3_client *client;
mutex_lock(&cxgb3_db_lock);
list_for_each_entry(client, &client_list, client_list) {
- if (client->err_handler)
- client->err_handler(tdev, status, error);
+ if (client->event_handler)
+ client->event_handler(tdev, event, port);
}
mutex_unlock(&cxgb3_db_lock);
}
void cxgb3_unregister_client(struct cxgb3_client *client);
void cxgb3_add_clients(struct t3cdev *tdev);
void cxgb3_remove_clients(struct t3cdev *tdev);
-void cxgb3_err_notify(struct t3cdev *tdev, u32 status, u32 error);
+void cxgb3_event_notify(struct t3cdev *tdev, u32 event, u32 port);
typedef int (*cxgb3_cpl_handler_func)(struct t3cdev *dev,
struct sk_buff *skb, void *ctx);
enum {
OFFLOAD_STATUS_UP,
- OFFLOAD_STATUS_DOWN
+ OFFLOAD_STATUS_DOWN,
+ OFFLOAD_PORT_DOWN,
+ OFFLOAD_PORT_UP
};
struct cxgb3_client {
int (*redirect)(void *ctx, struct dst_entry *old,
struct dst_entry *new, struct l2t_entry *l2t);
struct list_head client_list;
- void (*err_handler)(struct t3cdev *tdev, u32 status, u32 error);
+ void (*event_handler)(struct t3cdev *tdev, u32 event, u32 port);
};
/*
if (ioread8(&nic->csr->scb.status) & rus_no_res)
nic->ru_running = RU_SUSPENDED;
+ pci_dma_sync_single_for_device(nic->pdev, rx->dma_addr,
+ sizeof(struct rfd),
+ PCI_DMA_FROMDEVICE);
return -ENODATA;
}
{
struct e1000_nvm_info *nvm = &hw->nvm;
struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
- union ich8_hws_flash_status hsfsts;
- u32 gfpreg;
- u32 sector_base_addr;
- u32 sector_end_addr;
+ u32 gfpreg, sector_base_addr, sector_end_addr;
u16 i;
/* Can't read flash registers if the register set isn't mapped. */
/* Adjust to word count */
nvm->flash_bank_size /= sizeof(u16);
- /*
- * Make sure the flash bank size does not overwrite the 4k
- * sector ranges. We may have 64k allotted to us but we only care
- * about the first 2 4k sectors. Therefore, if we have anything less
- * than 64k set in the HSFSTS register, we will reduce the bank size
- * down to 4k and let the rest remain unused. If berasesz == 3, then
- * we are working in 64k mode. Otherwise we are not.
- */
- if (nvm->flash_bank_size > E1000_ICH8_SHADOW_RAM_WORDS) {
- hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
- if (hsfsts.hsf_status.berasesz != 3)
- nvm->flash_bank_size = E1000_ICH8_SHADOW_RAM_WORDS;
- }
-
nvm->word_size = E1000_ICH8_SHADOW_RAM_WORDS;
/* Clear shadow ram */
**/
static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw)
{
- u32 extcnf_ctrl;
- u32 timeout = PHY_CFG_TIMEOUT;
+ u32 extcnf_ctrl, timeout = PHY_CFG_TIMEOUT;
+ s32 ret_val = 0;
might_sleep();
while (timeout) {
extcnf_ctrl = er32(EXTCNF_CTRL);
+ if (!(extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG))
+ break;
- if (!(extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG)) {
- extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG;
- ew32(EXTCNF_CTRL, extcnf_ctrl);
+ mdelay(1);
+ timeout--;
+ }
+
+ if (!timeout) {
+ hw_dbg(hw, "SW/FW/HW has locked the resource for too long.\n");
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+ timeout = PHY_CFG_TIMEOUT * 2;
+
+ extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG;
+ ew32(EXTCNF_CTRL, extcnf_ctrl);
+
+ while (timeout) {
+ extcnf_ctrl = er32(EXTCNF_CTRL);
+ if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG)
+ break;
- extcnf_ctrl = er32(EXTCNF_CTRL);
- if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG)
- break;
- }
mdelay(1);
timeout--;
}
if (!timeout) {
- hw_dbg(hw, "FW or HW has locked the resource for too long.\n");
+ hw_dbg(hw, "Failed to acquire the semaphore.\n");
extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
ew32(EXTCNF_CTRL, extcnf_ctrl);
- mutex_unlock(&nvm_mutex);
- return -E1000_ERR_CONFIG;
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
}
- return 0;
+out:
+ if (ret_val)
+ mutex_unlock(&nvm_mutex);
+
+ return ret_val;
}
/**
struct e1000_nvm_info *nvm = &hw->nvm;
struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
u32 act_offset;
- s32 ret_val;
+ s32 ret_val = 0;
u32 bank = 0;
u16 i, word;
goto out;
ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
- if (ret_val)
- goto release;
+ if (ret_val) {
+ hw_dbg(hw, "Could not detect valid bank, assuming bank 0\n");
+ bank = 0;
+ }
act_offset = (bank) ? nvm->flash_bank_size : 0;
act_offset += offset;
+ ret_val = 0;
for (i = 0; i < words; i++) {
if ((dev_spec->shadow_ram) &&
(dev_spec->shadow_ram[offset+i].modified)) {
}
}
-release:
e1000_release_swflag_ich8lan(hw);
out:
{
struct e1000_nvm_info *nvm = &hw->nvm;
struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
- s32 ret_val;
u16 i;
if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) ||
return -E1000_ERR_NVM;
}
- ret_val = e1000_acquire_swflag_ich8lan(hw);
- if (ret_val)
- return ret_val;
-
for (i = 0; i < words; i++) {
dev_spec->shadow_ram[offset+i].modified = 1;
dev_spec->shadow_ram[offset+i].value = data[i];
}
- e1000_release_swflag_ich8lan(hw);
-
return 0;
}
*/
ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
if (ret_val) {
- e1000_release_swflag_ich8lan(hw);
- goto out;
+ hw_dbg(hw, "Could not detect valid bank, assuming bank 0\n");
+ bank = 0;
}
if (bank == 0) {
iteration = 1;
break;
case 2:
- if (hw->mac.type == e1000_ich9lan) {
- sector_size = ICH_FLASH_SEG_SIZE_8K;
- iteration = flash_bank_size / ICH_FLASH_SEG_SIZE_8K;
- } else {
- return -E1000_ERR_NVM;
- }
+ sector_size = ICH_FLASH_SEG_SIZE_8K;
+ iteration = 1;
break;
case 3:
sector_size = ICH_FLASH_SEG_SIZE_64K;
/* Start with the base address, then add the sector offset. */
flash_linear_addr = hw->nvm.flash_base_addr;
- flash_linear_addr += (bank) ? (sector_size * iteration) : 0;
+ flash_linear_addr += (bank) ? flash_bank_size : 0;
for (j = 0; j < iteration ; j++) {
do {
/* Allow time for pending master requests to run */
e1000e_disable_pcie_master(&adapter->hw);
- if ((adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) &&
- !(hw->mac.ops.check_mng_mode(hw))) {
+ if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) {
/* enable wakeup by the PHY */
retval = e1000_init_phy_wakeup(adapter, wufc);
if (retval)
*enable_wake = !!wufc;
/* make sure adapter isn't asleep if manageability is enabled */
- if (adapter->flags & FLAG_MNG_PT_ENABLED)
+ if ((adapter->flags & FLAG_MNG_PT_ENABLED) ||
+ (hw->mac.ops.check_mng_mode(hw)))
*enable_wake = true;
if (adapter->hw.phy.type == e1000_phy_igp_3)
return err;
}
- /* AER (Advanced Error Reporting) hooks */
- err = pci_enable_pcie_error_reporting(pdev);
- if (err) {
- dev_err(&pdev->dev, "pci_enable_pcie_error_reporting failed "
- "0x%x\n", err);
- /* non-fatal, continue */
- }
-
pci_set_master(pdev);
pci_enable_wake(pdev, PCI_D3hot, 0);
if (err)
goto err_pci_reg;
+ /* AER (Advanced Error Reporting) hooks */
+ err = pci_enable_pcie_error_reporting(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "pci_enable_pcie_error_reporting failed "
+ "0x%x\n", err);
+ /* non-fatal, continue */
+ }
+
pci_set_master(pdev);
/* PCI config space info */
err = pci_save_state(pdev);
printk(KERN_INFO "eepro_init_module: Auto-detecting boards (May God protect us...)\n");
}
- for (i = 0; io[i] != -1 && i < MAX_EEPRO; i++) {
+ for (i = 0; i < MAX_EEPRO && io[i] != -1; i++) {
dev = alloc_etherdev(sizeof(struct eepro_local));
if (!dev)
break;
outw(0x0000, ioaddr + 0x800c);
outw(0x0000, ioaddr + 0x800e);
- for (i = 0; i < (sizeof(start_code)); i+=32) {
+ for (i = 0; i < ARRAY_SIZE(start_code) * 2; i+=32) {
int j;
outw(i, ioaddr + SM_PTR);
- for (j = 0; j < 16; j+=2)
+ for (j = 0; j < 16 && (i+j)/2 < ARRAY_SIZE(start_code); j+=2)
outw(start_code[(i+j)/2],
ioaddr+0x4000+j);
- for (j = 0; j < 16; j+=2)
+ for (j = 0; j < 16 && (i+j+16)/2 < ARRAY_SIZE(start_code); j+=2)
outw(start_code[(i+j+16)/2],
ioaddr+0x8000+j);
}
#include <asm/io.h>
#define DRV_NAME "ehea"
-#define DRV_VERSION "EHEA_0101"
+#define DRV_VERSION "EHEA_0102"
/* eHEA capability flags */
#define DLPAR_PORT_ADD_REM 1
{
int ret, i;
+ if (pr->qp)
+ netif_napi_del(&pr->napi);
+
ret = ehea_destroy_qp(pr->qp);
if (!ret) {
.ndo_poll_controller = ehea_netpoll,
#endif
.ndo_get_stats = ehea_get_stats,
+ .ndo_change_mtu = eth_change_mtu,
.ndo_set_mac_address = ehea_set_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
.ndo_set_multicast_list = ehea_set_multicast_list,
.ndo_change_mtu = ehea_change_mtu,
.ndo_vlan_rx_register = ehea_vlan_rx_register,
if (np->flags == HAS_MII_XCVR) {
int phy, phy_idx = 0;
- for (phy = 1; phy < 32 && phy_idx < 4; phy++) {
+ for (phy = 1; phy < 32 && phy_idx < ARRAY_SIZE(np->phys);
+ phy++) {
int mii_status = mdio_read(dev, phy, 1);
if (mii_status != 0xffff && mii_status != 0x0000) {
{
struct fec_enet_private *fep = netdev_priv(dev);
struct bufdesc *bdp;
+ void *bufaddr;
unsigned short status;
unsigned long flags;
status &= ~BD_ENET_TX_STATS;
/* Set buffer length and buffer pointer */
- bdp->cbd_bufaddr = __pa(skb->data);
+ bufaddr = skb->data;
bdp->cbd_datlen = skb->len;
/*
* 4-byte boundaries. Use bounce buffers to copy data
* and get it aligned. Ugh.
*/
- if (bdp->cbd_bufaddr & FEC_ALIGNMENT) {
+ if (((unsigned long) bufaddr) & FEC_ALIGNMENT) {
unsigned int index;
index = bdp - fep->tx_bd_base;
memcpy(fep->tx_bounce[index], (void *)skb->data, skb->len);
- bdp->cbd_bufaddr = __pa(fep->tx_bounce[index]);
+ bufaddr = fep->tx_bounce[index];
}
/* Save skb pointer */
/* Push the data cache so the CPM does not get stale memory
* data.
*/
- bdp->cbd_bufaddr = dma_map_single(&dev->dev, skb->data,
+ bdp->cbd_bufaddr = dma_map_single(&dev->dev, bufaddr,
FEC_ENET_TX_FRSIZE, DMA_TO_DEVICE);
/* Send it on its way. Tell FEC it's ready, interrupt when done,
.ndo_stop = fec_enet_close,
.ndo_start_xmit = fec_enet_start_xmit,
.ndo_set_multicast_list = set_multicast_list,
+ .ndo_change_mtu = eth_change_mtu,
.ndo_validate_addr = eth_validate_addr,
.ndo_tx_timeout = fec_timeout,
.ndo_set_mac_address = fec_set_mac_address,
{
struct mpc52xx_fec_priv *priv = netdev_priv(dev);
struct bcom_fec_bd *bd;
+ unsigned long flags;
if (bcom_queue_full(priv->tx_dmatsk)) {
if (net_ratelimit())
return NETDEV_TX_BUSY;
}
- spin_lock_irq(&priv->lock);
+ spin_lock_irqsave(&priv->lock, flags);
dev->trans_start = jiffies;
bd = (struct bcom_fec_bd *)
netif_stop_queue(dev);
}
- spin_unlock_irq(&priv->lock);
+ spin_unlock_irqrestore(&priv->lock, flags);
return NETDEV_TX_OK;
}
fep->oldlink = 0;
fep->oldspeed = 0;
fep->oldduplex = -1;
- if(fep->fpi->phy_node)
- phydev = of_phy_connect(dev, fep->fpi->phy_node,
- &fs_adjust_link, 0,
- PHY_INTERFACE_MODE_MII);
- else {
- printk("No phy bus ID specified in BSP code\n");
- return -EINVAL;
+
+ phydev = of_phy_connect(dev, fep->fpi->phy_node, &fs_adjust_link, 0,
+ PHY_INTERFACE_MODE_MII);
+ if (!phydev) {
+ phydev = of_phy_connect_fixed_link(dev, &fs_adjust_link,
+ PHY_INTERFACE_MODE_MII);
}
- if (IS_ERR(phydev)) {
- printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
- return PTR_ERR(phydev);
+ if (!phydev) {
+ dev_err(&dev->dev, "Could not attach to PHY\n");
+ return -ENODEV;
}
fep->phydev = phydev;
goto out_free_fpi;
}
+ SET_NETDEV_DEV(ndev, &ofdev->dev);
dev_set_drvdata(&ofdev->dev, ndev);
fep = netdev_priv(ndev);
.ndo_tx_timeout = gfar_timeout,
.ndo_do_ioctl = gfar_ioctl,
.ndo_vlan_rx_register = gfar_vlan_rx_register,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = gfar_netpoll,
#endif
priv->device_flags |= FSL_GIANFAR_DEV_HAS_MAGIC_PACKET;
priv->phy_node = of_parse_phandle(np, "phy-handle", 0);
- if (!priv->phy_node) {
- u32 *fixed_link;
-
- fixed_link = (u32 *)of_get_property(np, "fixed-link", NULL);
- if (!fixed_link) {
- err = -ENODEV;
- goto err_out;
- }
- }
/* Find the TBI PHY. If it's not there, we don't support SGMII */
priv->tbi_node = of_parse_phandle(np, "tbi-handle", 0);
dev_set_drvdata(&ofdev->dev, NULL);
+ unregister_netdev(priv->ndev);
iounmap(priv->regs);
free_netdev(priv->ndev);
interface = gfar_get_interface(dev);
- if (priv->phy_node) {
- priv->phydev = of_phy_connect(dev, priv->phy_node, &adjust_link,
- 0, interface);
- if (!priv->phydev) {
- dev_err(&dev->dev, "error: Could not attach to PHY\n");
- return -ENODEV;
- }
+ priv->phydev = of_phy_connect(dev, priv->phy_node, &adjust_link, 0,
+ interface);
+ if (!priv->phydev)
+ priv->phydev = of_phy_connect_fixed_link(dev, &adjust_link,
+ interface);
+ if (!priv->phydev) {
+ dev_err(&dev->dev, "could not attach to PHY\n");
+ return -ENODEV;
}
if (interface == PHY_INTERFACE_MODE_SGMII)
struct gfar __iomem *regs = priv->regs;
int err = 0;
u32 rctrl = 0;
+ u32 tctrl = 0;
u32 attrs = 0;
gfar_write(®s->imask, IMASK_INIT_CLEAR);
rctrl |= RCTRL_PADDING(priv->padding);
}
+ /* keep vlan related bits if it's enabled */
+ if (priv->vlgrp) {
+ rctrl |= RCTRL_VLEX | RCTRL_PRSDEP_INIT;
+ tctrl |= TCTRL_VLINS;
+ }
+
/* Init rctrl based on our settings */
gfar_write(&priv->regs->rctrl, rctrl);
if (dev->features & NETIF_F_IP_CSUM)
- gfar_write(&priv->regs->tctrl, TCTRL_INIT_CSUM);
+ tctrl |= TCTRL_INIT_CSUM;
+
+ gfar_write(&priv->regs->tctrl, tctrl);
/* Set the extraction length and index */
attrs = ATTRELI_EL(priv->rx_stash_size) |
/* Enable VLAN tag extraction */
tempval = gfar_read(&priv->regs->rctrl);
- tempval |= RCTRL_VLEX;
tempval |= (RCTRL_VLEX | RCTRL_PRSDEP_INIT);
gfar_write(&priv->regs->rctrl, tempval);
} else {
return -EINVAL;
}
- priv->rxic = mk_ic_value(
- gfar_usecs2ticks(priv, cvals->rx_coalesce_usecs),
- cvals->rx_max_coalesced_frames);
+ priv->rxic = mk_ic_value(cvals->rx_max_coalesced_frames,
+ gfar_usecs2ticks(priv, cvals->rx_coalesce_usecs));
/* Set up tx coalescing */
if ((cvals->tx_coalesce_usecs == 0) ||
return -EINVAL;
}
- priv->txic = mk_ic_value(
- gfar_usecs2ticks(priv, cvals->tx_coalesce_usecs),
- cvals->tx_max_coalesced_frames);
+ priv->txic = mk_ic_value(cvals->tx_max_coalesced_frames,
+ gfar_usecs2ticks(priv, cvals->tx_coalesce_usecs));
gfar_write(&priv->regs->rxic, 0);
if (priv->rxcoalescing)
* devices like TTY. It interfaces between a raw TTY and the
* kernel's AX.25 protocol layers.
*
- * Authors: Andreas Könsgen <ajk@iehk.rwth-aachen.de>
+ * Authors: Andreas Könsgen <ajk@comnets.uni-bremen.de>
* Ralf Baechle DL5RB <ralf@linux-mips.org>
*
* Quite a lot of stuff "stolen" by Joerg Reuter from slip.c, written by
free_irq(dev->emac_irq, dev);
+ netif_carrier_off(ndev);
+
return 0;
}
void rgmii_detach(struct of_device *ofdev, int input)
{
struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev);
- struct rgmii_regs __iomem *p = dev->base;
-
- mutex_lock(&dev->lock);
+ struct rgmii_regs __iomem *p;
BUG_ON(!dev || dev->users == 0);
+ p = dev->base;
+
+ mutex_lock(&dev->lock);
RGMII_DBG(dev, "detach(%d)" NL, input);
static void igb_ping_all_vfs(struct igb_adapter *);
static void igb_msg_task(struct igb_adapter *);
static int igb_rcv_msg_from_vf(struct igb_adapter *, u32);
-static inline void igb_set_rah_pool(struct e1000_hw *, int , int);
static void igb_set_mc_list_pools(struct igb_adapter *, int, u16);
static void igb_vmm_control(struct igb_adapter *);
-static inline void igb_set_vmolr(struct e1000_hw *, int);
-static inline int igb_set_vf_rlpml(struct igb_adapter *, int, int);
static int igb_set_vf_mac(struct igb_adapter *adapter, int, unsigned char *);
static void igb_restore_vf_multicasts(struct igb_adapter *adapter);
+static inline void igb_set_vmolr(struct e1000_hw *hw, int vfn)
+{
+ u32 reg_data;
+
+ reg_data = rd32(E1000_VMOLR(vfn));
+ reg_data |= E1000_VMOLR_BAM | /* Accept broadcast */
+ E1000_VMOLR_ROPE | /* Accept packets matched in UTA */
+ E1000_VMOLR_ROMPE | /* Accept packets matched in MTA */
+ E1000_VMOLR_AUPE | /* Accept untagged packets */
+ E1000_VMOLR_STRVLAN; /* Strip vlan tags */
+ wr32(E1000_VMOLR(vfn), reg_data);
+}
+
+static inline int igb_set_vf_rlpml(struct igb_adapter *adapter, int size,
+ int vfn)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 vmolr;
+
+ vmolr = rd32(E1000_VMOLR(vfn));
+ vmolr &= ~E1000_VMOLR_RLPML_MASK;
+ vmolr |= size | E1000_VMOLR_LPE;
+ wr32(E1000_VMOLR(vfn), vmolr);
+
+ return 0;
+}
+
+static inline void igb_set_rah_pool(struct e1000_hw *hw, int pool, int entry)
+{
+ u32 reg_data;
+
+ reg_data = rd32(E1000_RAH(entry));
+ reg_data &= ~E1000_RAH_POOL_MASK;
+ reg_data |= E1000_RAH_POOL_1 << pool;;
+ wr32(E1000_RAH(entry), reg_data);
+}
+
#ifdef CONFIG_PM
static int igb_suspend(struct pci_dev *, pm_message_t);
static int igb_resume(struct pci_dev *);
igb_get_hw_control(adapter);
}
-static inline void igb_set_vmolr(struct e1000_hw *hw, int vfn)
-{
- u32 reg_data;
-
- reg_data = rd32(E1000_VMOLR(vfn));
- reg_data |= E1000_VMOLR_BAM | /* Accept broadcast */
- E1000_VMOLR_ROPE | /* Accept packets matched in UTA */
- E1000_VMOLR_ROMPE | /* Accept packets matched in MTA */
- E1000_VMOLR_AUPE | /* Accept untagged packets */
- E1000_VMOLR_STRVLAN; /* Strip vlan tags */
- wr32(E1000_VMOLR(vfn), reg_data);
-}
-
-static inline int igb_set_vf_rlpml(struct igb_adapter *adapter, int size,
- int vfn)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 vmolr;
-
- vmolr = rd32(E1000_VMOLR(vfn));
- vmolr &= ~E1000_VMOLR_RLPML_MASK;
- vmolr |= size | E1000_VMOLR_LPE;
- wr32(E1000_VMOLR(vfn), vmolr);
-
- return 0;
-}
-
-static inline void igb_set_rah_pool(struct e1000_hw *hw, int pool, int entry)
-{
- u32 reg_data;
-
- reg_data = rd32(E1000_RAH(entry));
- reg_data &= ~E1000_RAH_POOL_MASK;
- reg_data |= E1000_RAH_POOL_1 << pool;;
- wr32(E1000_RAH(entry), reg_data);
-}
-
static void igb_set_mc_list_pools(struct igb_adapter *adapter,
int entry_count, u16 total_rar_filters)
{
err = mbx->ops.read_posted(hw, msgbuf, 2);
+ msgbuf[0] &= ~E1000_VT_MSGTYPE_CTS;
+
/* if nacked the vlan was rejected */
if (!err && (msgbuf[0] == (E1000_VF_SET_VLAN | E1000_VT_MSGTYPE_NACK)))
err = -E1000_ERR_MAC_INIT;
if (!ret_val)
ret_val = mbx->ops.read_posted(hw, msgbuf, 3);
+ msgbuf[0] &= ~E1000_VT_MSGTYPE_CTS;
+
/* if nacked the address was rejected, use "perm_addr" */
if (!ret_val &&
(msgbuf[0] == (E1000_VF_SET_MAC_ADDR | E1000_VT_MSGTYPE_NACK)))
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
#include <linux/slab.h>
#include <linux/rtnetlink.h>
#include <linux/interrupt.h>
.ndo_start_xmit = au1k_irda_hard_xmit,
.ndo_tx_timeout = au1k_tx_timeout,
.ndo_do_ioctl = au1k_irda_ioctl,
- .ndo_change_mtu = eth_change_mtu,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = eth_mac_addr,
};
static int au1k_irda_net_init(struct net_device *dev)
.ndo_stop = pxa_irda_stop,
.ndo_start_xmit = pxa_irda_hard_xmit,
.ndo_do_ioctl = pxa_irda_ioctl,
- .ndo_change_mtu = eth_change_mtu,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = eth_mac_addr,
};
static int pxa_irda_probe(struct platform_device *pdev)
if (!dev)
goto err_mem_3;
+ SET_NETDEV_DEV(dev, &pdev->dev);
si = netdev_priv(dev);
si->dev = &pdev->dev;
si->pdata = pdev->dev.platform_data;
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
#include <linux/slab.h>
#include <linux/rtnetlink.h>
#include <linux/interrupt.h>
.ndo_stop = sa1100_irda_stop,
.ndo_start_xmit = sa1100_irda_hard_xmit,
.ndo_do_ioctl = sa1100_irda_ioctl,
- .ndo_change_mtu = eth_change_mtu,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = eth_mac_addr,
};
static int sa1100_irda_probe(struct platform_device *pdev)
IRDA_DEBUG(0, "%s()\n", __func__ );
- for (i=0; (io[i] < 2000) && (i < ARRAY_SIZE(dev_self)); i++) {
+ for (i=0; i < ARRAY_SIZE(dev_self) && io[i] < 2000; i++) {
if (w83977af_open(i, io[i], irq[i], dma[i]) == 0)
return 0;
}
* hardware interrupt handler. Queue flow control is
* thus managed under this lock as well.
*/
- spin_lock_irq(&np->lock);
+ unsigned long flags;
+ spin_lock_irqsave(&np->lock, flags);
add_to_tx_ring(np, skb, length);
dev->trans_start = jiffies;
* is when the transmit statistics are updated.
*/
- spin_unlock_irq(&np->lock);
+ spin_unlock_irqrestore(&np->lock, flags);
#else
/* This is the case for older hardware which takes
* a single transmit buffer at a time, and it is
#define IXGBE_TX_FLAGS_VLAN_PRIO_MASK 0x0000e000
#define IXGBE_TX_FLAGS_VLAN_SHIFT 16
+#define IXGBE_MAX_RSC_INT_RATE 162760
+
/* wrapper around a pointer to a socket buffer,
* so a DMA handle can be stored along with the buffer */
struct ixgbe_tx_buffer {
u8 queue_index; /* needed for multiqueue queue management */
+#define IXGBE_RING_RX_PS_ENABLED (u8)(1)
+ u8 flags; /* per ring feature flags */
u16 head;
u16 tail;
#define IXGBE_FLAG_IN_SFP_MOD_TASK (u32)(1 << 25)
#define IXGBE_FLAG_FDIR_HASH_CAPABLE (u32)(1 << 26)
#define IXGBE_FLAG_FDIR_PERFECT_CAPABLE (u32)(1 << 27)
+#define IXGBE_FLAG_FCOE_CAPABLE (u32)(1 << 28)
#define IXGBE_FLAG_FCOE_ENABLED (u32)(1 << 29)
u32 flags2;
static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
u8 *eeprom_data);
+/**
+ * ixgbe_set_pcie_completion_timeout - set pci-e completion timeout
+ * @hw: pointer to the HW structure
+ *
+ * The defaults for 82598 should be in the range of 50us to 50ms,
+ * however the hardware default for these parts is 500us to 1ms which is less
+ * than the 10ms recommended by the pci-e spec. To address this we need to
+ * increase the value to either 10ms to 250ms for capability version 1 config,
+ * or 16ms to 55ms for version 2.
+ **/
+void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw)
+{
+ struct ixgbe_adapter *adapter = hw->back;
+ u32 gcr = IXGBE_READ_REG(hw, IXGBE_GCR);
+ u16 pcie_devctl2;
+
+ /* only take action if timeout value is defaulted to 0 */
+ if (gcr & IXGBE_GCR_CMPL_TMOUT_MASK)
+ goto out;
+
+ /*
+ * if capababilities version is type 1 we can write the
+ * timeout of 10ms to 250ms through the GCR register
+ */
+ if (!(gcr & IXGBE_GCR_CAP_VER2)) {
+ gcr |= IXGBE_GCR_CMPL_TMOUT_10ms;
+ goto out;
+ }
+
+ /*
+ * for version 2 capabilities we need to write the config space
+ * directly in order to set the completion timeout value for
+ * 16ms to 55ms
+ */
+ pci_read_config_word(adapter->pdev,
+ IXGBE_PCI_DEVICE_CONTROL2, &pcie_devctl2);
+ pcie_devctl2 |= IXGBE_PCI_DEVICE_CONTROL2_16ms;
+ pci_write_config_word(adapter->pdev,
+ IXGBE_PCI_DEVICE_CONTROL2, pcie_devctl2);
+out:
+ /* disable completion timeout resend */
+ gcr &= ~IXGBE_GCR_CMPL_TMOUT_RESEND;
+ IXGBE_WRITE_REG(hw, IXGBE_GCR, gcr);
+}
+
/**
* ixgbe_get_pcie_msix_count_82598 - Gets MSI-X vector count
* @hw: pointer to hardware structure
return ret_val;
}
+/**
+ * ixgbe_start_hw_82598 - Prepare hardware for Tx/Rx
+ * @hw: pointer to hardware structure
+ *
+ * Starts the hardware using the generic start_hw function.
+ * Then set pcie completion timeout
+ **/
+s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw)
+{
+ s32 ret_val = 0;
+
+ ret_val = ixgbe_start_hw_generic(hw);
+
+ /* set the completion timeout for interface */
+ if (ret_val == 0)
+ ixgbe_set_pcie_completion_timeout(hw);
+
+ return ret_val;
+}
+
/**
* ixgbe_get_link_capabilities_82598 - Determines link capabilities
* @hw: pointer to hardware structure
static struct ixgbe_mac_operations mac_ops_82598 = {
.init_hw = &ixgbe_init_hw_generic,
.reset_hw = &ixgbe_reset_hw_82598,
- .start_hw = &ixgbe_start_hw_generic,
+ .start_hw = &ixgbe_start_hw_82598,
.clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic,
.get_media_type = &ixgbe_get_media_type_82598,
.get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82598,
{
struct ixgbe_adapter *adapter = netdev_priv(netdev);
- DPRINTK(DRV, INFO, "Get DCB Admin Mode.\n");
-
return !!(adapter->flags & IXGBE_FLAG_DCB_ENABLED);
}
u8 err = 0;
struct ixgbe_adapter *adapter = netdev_priv(netdev);
- DPRINTK(DRV, INFO, "Set DCB Admin Mode.\n");
-
if (state > 0) {
/* Turn on DCB */
if (adapter->flags & IXGBE_FLAG_DCB_ENABLED)
adapter->flags &= ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
}
adapter->flags |= IXGBE_FLAG_DCB_ENABLED;
+#ifdef IXGBE_FCOE
+ /* Turn on FCoE offload */
+ if ((adapter->flags & IXGBE_FLAG_FCOE_CAPABLE) &&
+ (!(adapter->flags & IXGBE_FLAG_FCOE_ENABLED))) {
+ adapter->flags |= IXGBE_FLAG_FCOE_ENABLED;
+ adapter->ring_feature[RING_F_FCOE].indices =
+ IXGBE_FCRETA_SIZE;
+ netdev->features |= NETIF_F_FCOE_CRC;
+ netdev->features |= NETIF_F_FSO;
+ netdev->fcoe_ddp_xid = IXGBE_FCOE_DDP_MAX - 1;
+ }
+#endif /* IXGBE_FCOE */
ixgbe_init_interrupt_scheme(adapter);
if (netif_running(netdev))
netdev->netdev_ops->ndo_open(netdev);
adapter->flags |= IXGBE_FLAG_RSS_ENABLED;
if (adapter->hw.mac.type == ixgbe_mac_82599EB)
adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
+
+#ifdef IXGBE_FCOE
+ /* Turn off FCoE offload */
+ if (adapter->flags & (IXGBE_FLAG_FCOE_CAPABLE |
+ IXGBE_FLAG_FCOE_ENABLED)) {
+ adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED;
+ adapter->ring_feature[RING_F_FCOE].indices = 0;
+ netdev->features &= ~NETIF_F_FCOE_CRC;
+ netdev->features &= ~NETIF_F_FSO;
+ netdev->fcoe_ddp_xid = 0;
+ }
+#endif /* IXGBE_FCOE */
ixgbe_init_interrupt_scheme(adapter);
if (netif_running(netdev))
netdev->netdev_ops->ndo_open(netdev);
struct ixgbe_adapter *adapter = netdev_priv(netdev);
int i, j;
+ memset(perm_addr, 0xff, MAX_ADDR_LEN);
+
for (i = 0; i < netdev->addr_len; i++)
perm_addr[i] = adapter->hw.mac.perm_addr[i];
struct ethtool_coalesce *ec)
{
struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_q_vector *q_vector;
int i;
if (ec->tx_max_coalesced_frames_irq)
* any other value means disable eitr, which is best
* served by setting the interrupt rate very high
*/
- adapter->eitr_param = IXGBE_MAX_INT_RATE;
+ if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)
+ adapter->eitr_param = IXGBE_MAX_RSC_INT_RATE;
+ else
+ adapter->eitr_param = IXGBE_MAX_INT_RATE;
adapter->itr_setting = 0;
}
- for (i = 0; i < adapter->num_msix_vectors - NON_Q_VECTORS; i++) {
- struct ixgbe_q_vector *q_vector = adapter->q_vector[i];
- if (q_vector->txr_count && !q_vector->rxr_count)
- /* tx vector gets half the rate */
- q_vector->eitr = (adapter->eitr_param >> 1);
- else
- /* rx only or mixed */
- q_vector->eitr = adapter->eitr_param;
+ /* MSI/MSIx Interrupt Mode */
+ if (adapter->flags &
+ (IXGBE_FLAG_MSIX_ENABLED | IXGBE_FLAG_MSI_ENABLED)) {
+ int num_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+ for (i = 0; i < num_vectors; i++) {
+ q_vector = adapter->q_vector[i];
+ if (q_vector->txr_count && !q_vector->rxr_count)
+ /* tx vector gets half the rate */
+ q_vector->eitr = (adapter->eitr_param >> 1);
+ else
+ /* rx only or mixed */
+ q_vector->eitr = adapter->eitr_param;
+ ixgbe_write_eitr(q_vector);
+ }
+ /* Legacy Interrupt Mode */
+ } else {
+ q_vector = adapter->q_vector[0];
+ q_vector->eitr = adapter->eitr_param;
ixgbe_write_eitr(q_vector);
}
ethtool_op_set_flags(netdev, data);
- if (!(adapter->flags & IXGBE_FLAG2_RSC_CAPABLE))
+ if (!(adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE))
return 0;
/* if state changes we need to update adapter->flags and reset */
if ((!!(data & ETH_FLAG_LRO)) !=
- (!!(adapter->flags & IXGBE_FLAG2_RSC_ENABLED))) {
- adapter->flags ^= IXGBE_FLAG2_RSC_ENABLED;
+ (!!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED))) {
+ adapter->flags2 ^= IXGBE_FLAG2_RSC_ENABLED;
if (netif_running(netdev))
ixgbe_reinit_locked(adapter);
else
/* return 0 to bypass going to ULD for DDPed data */
if (fcstat == IXGBE_RXDADV_STAT_FCSTAT_DDP)
rc = 0;
- else
+ else if (ddp->len)
rc = ddp->len;
}
#include <linux/in.h>
#include <linux/ip.h>
#include <linux/tcp.h>
+#include <linux/pkt_sched.h>
#include <linux/ipv6.h>
#include <net/checksum.h>
#include <net/ip6_checksum.h>
skb_record_rx_queue(skb, ring->queue_index);
if (!(adapter->flags & IXGBE_FLAG_IN_NETPOLL)) {
- if (adapter->vlgrp && is_vlan && (tag != 0))
+ if (adapter->vlgrp && is_vlan && (tag & VLAN_VID_MASK))
vlan_gro_receive(napi, adapter->vlgrp, tag, skb);
else
napi_gro_receive(napi, skb);
} else {
- if (adapter->vlgrp && is_vlan && (tag != 0))
+ if (adapter->vlgrp && is_vlan && (tag & VLAN_VID_MASK))
vlan_hwaccel_rx(skb, adapter->vlgrp, tag);
else
netif_rx(skb);
* @skb: skb currently being received and modified
**/
static inline void ixgbe_rx_checksum(struct ixgbe_adapter *adapter,
- u32 status_err, struct sk_buff *skb)
+ union ixgbe_adv_rx_desc *rx_desc,
+ struct sk_buff *skb)
{
+ u32 status_err = le32_to_cpu(rx_desc->wb.upper.status_error);
+
skb->ip_summed = CHECKSUM_NONE;
/* Rx csum disabled */
return;
if (status_err & IXGBE_RXDADV_ERR_TCPE) {
+ u16 pkt_info = rx_desc->wb.lower.lo_dword.hs_rss.pkt_info;
+
+ /*
+ * 82599 errata, UDP frames with a 0 checksum can be marked as
+ * checksum errors.
+ */
+ if ((pkt_info & IXGBE_RXDADV_PKTTYPE_UDP) &&
+ (adapter->hw.mac.type == ixgbe_mac_82599EB))
+ return;
+
adapter->hw_csum_rx_error++;
return;
}
rx_desc = IXGBE_RX_DESC_ADV(*rx_ring, i);
if (!bi->page_dma &&
- (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED)) {
+ (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED)) {
if (!bi->page) {
bi->page = alloc_page(GFP_ATOMIC);
if (!bi->page) {
}
/* Refresh the desc even if buffer_addrs didn't change because
* each write-back erases this info. */
- if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
+ if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED) {
rx_desc->read.pkt_addr = cpu_to_le64(bi->page_dma);
rx_desc->read.hdr_addr = cpu_to_le64(bi->dma);
} else {
break;
(*work_done)++;
- if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
+ if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED) {
hdr_info = le16_to_cpu(ixgbe_get_hdr_info(rx_desc));
len = (hdr_info & IXGBE_RXDADV_HDRBUFLEN_MASK) >>
IXGBE_RXDADV_HDRBUFLEN_SHIFT;
prefetch(next_rxd);
cleaned_count++;
- if (adapter->flags & IXGBE_FLAG2_RSC_CAPABLE)
+ if (adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE)
rsc_count = ixgbe_get_rsc_count(rx_desc);
if (rsc_count) {
rx_ring->stats.packets++;
rx_ring->stats.bytes += skb->len;
} else {
- if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
+ if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED) {
rx_buffer_info->skb = next_buffer->skb;
rx_buffer_info->dma = next_buffer->dma;
next_buffer->skb = skb;
goto next_desc;
}
- ixgbe_rx_checksum(adapter, staterr, skb);
+ ixgbe_rx_checksum(adapter, rx_desc, skb);
/* probably a little skewed due to removing CRC */
total_rx_bytes += skb->len;
#define IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT 2
-static void ixgbe_configure_srrctl(struct ixgbe_adapter *adapter, int index)
+static void ixgbe_configure_srrctl(struct ixgbe_adapter *adapter,
+ struct ixgbe_ring *rx_ring)
{
- struct ixgbe_ring *rx_ring;
u32 srrctl;
- int queue0 = 0;
- unsigned long mask;
+ int index;
struct ixgbe_ring_feature *feature = adapter->ring_feature;
- if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
- if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
- int dcb_i = feature[RING_F_DCB].indices;
- if (dcb_i == 8)
- queue0 = index >> 4;
- else if (dcb_i == 4)
- queue0 = index >> 5;
- else
- dev_err(&adapter->pdev->dev, "Invalid DCB "
- "configuration\n");
-#ifdef IXGBE_FCOE
- if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
- struct ixgbe_ring_feature *f;
-
- rx_ring = &adapter->rx_ring[queue0];
- f = &adapter->ring_feature[RING_F_FCOE];
- if ((queue0 == 0) && (index > rx_ring->reg_idx))
- queue0 = f->mask + index -
- rx_ring->reg_idx - 1;
- }
-#endif /* IXGBE_FCOE */
- } else {
- queue0 = index;
- }
- } else {
+ index = rx_ring->reg_idx;
+ if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
+ unsigned long mask;
mask = (unsigned long) feature[RING_F_RSS].mask;
- queue0 = index & mask;
index = index & mask;
}
-
- rx_ring = &adapter->rx_ring[queue0];
-
srrctl = IXGBE_READ_REG(&adapter->hw, IXGBE_SRRCTL(index));
srrctl &= ~IXGBE_SRRCTL_BSIZEHDR_MASK;
srrctl |= (IXGBE_RX_HDR_SIZE << IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT) &
IXGBE_SRRCTL_BSIZEHDR_MASK;
- if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
+ if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED) {
#if (PAGE_SIZE / 2) > IXGBE_MAX_RXBUFFER
srrctl |= IXGBE_MAX_RXBUFFER >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
#else
{
u64 rdba;
struct ixgbe_hw *hw = &adapter->hw;
+ struct ixgbe_ring *rx_ring;
struct net_device *netdev = adapter->netdev;
int max_frame = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
int i, j;
/* Decide whether to use packet split mode or not */
adapter->flags |= IXGBE_FLAG_RX_PS_ENABLED;
-#ifdef IXGBE_FCOE
- if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)
- adapter->flags &= ~IXGBE_FLAG_RX_PS_ENABLED;
-#endif /* IXGBE_FCOE */
-
/* Set the RX buffer length according to the mode */
if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
rx_buf_len = IXGBE_RX_HDR_SIZE;
IXGBE_WRITE_REG(hw, IXGBE_PSRTYPE(0), psrtype);
}
} else {
- if (!(adapter->flags & IXGBE_FLAG2_RSC_ENABLED) &&
+ if (!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) &&
(netdev->mtu <= ETH_DATA_LEN))
rx_buf_len = MAXIMUM_ETHERNET_VLAN_SIZE;
else
* the Base and Length of the Rx Descriptor Ring
*/
for (i = 0; i < adapter->num_rx_queues; i++) {
- rdba = adapter->rx_ring[i].dma;
- j = adapter->rx_ring[i].reg_idx;
+ rx_ring = &adapter->rx_ring[i];
+ rdba = rx_ring->dma;
+ j = rx_ring->reg_idx;
IXGBE_WRITE_REG(hw, IXGBE_RDBAL(j), (rdba & DMA_BIT_MASK(32)));
IXGBE_WRITE_REG(hw, IXGBE_RDBAH(j), (rdba >> 32));
IXGBE_WRITE_REG(hw, IXGBE_RDLEN(j), rdlen);
IXGBE_WRITE_REG(hw, IXGBE_RDH(j), 0);
IXGBE_WRITE_REG(hw, IXGBE_RDT(j), 0);
- adapter->rx_ring[i].head = IXGBE_RDH(j);
- adapter->rx_ring[i].tail = IXGBE_RDT(j);
- adapter->rx_ring[i].rx_buf_len = rx_buf_len;
+ rx_ring->head = IXGBE_RDH(j);
+ rx_ring->tail = IXGBE_RDT(j);
+ rx_ring->rx_buf_len = rx_buf_len;
+
+ if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED)
+ rx_ring->flags |= IXGBE_RING_RX_PS_ENABLED;
#ifdef IXGBE_FCOE
if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
struct ixgbe_ring_feature *f;
f = &adapter->ring_feature[RING_F_FCOE];
- if ((rx_buf_len < IXGBE_FCOE_JUMBO_FRAME_SIZE) &&
- (i >= f->mask) && (i < f->mask + f->indices))
- adapter->rx_ring[i].rx_buf_len =
- IXGBE_FCOE_JUMBO_FRAME_SIZE;
+ if ((i >= f->mask) && (i < f->mask + f->indices)) {
+ rx_ring->flags &= ~IXGBE_RING_RX_PS_ENABLED;
+ if (rx_buf_len < IXGBE_FCOE_JUMBO_FRAME_SIZE)
+ rx_ring->rx_buf_len =
+ IXGBE_FCOE_JUMBO_FRAME_SIZE;
+ }
}
#endif /* IXGBE_FCOE */
- ixgbe_configure_srrctl(adapter, j);
+ ixgbe_configure_srrctl(adapter, rx_ring);
}
if (hw->mac.type == ixgbe_mac_82598EB) {
IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, rdrxctl);
}
- if (adapter->flags & IXGBE_FLAG2_RSC_ENABLED) {
+ if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) {
/* Enable 82599 HW-RSC */
for (i = 0; i < adapter->num_rx_queues; i++) {
- j = adapter->rx_ring[i].reg_idx;
+ rx_ring = &adapter->rx_ring[i];
+ j = rx_ring->reg_idx;
rscctrl = IXGBE_READ_REG(hw, IXGBE_RSCCTL(j));
rscctrl |= IXGBE_RSCCTL_RSCEN;
/*
* total size of max desc * buf_len is not greater
* than 65535
*/
- if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
+ if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED) {
#if (MAX_SKB_FRAGS > 16)
rscctrl |= IXGBE_RSCCTL_MAXDESC_16;
#elif (MAX_SKB_FRAGS > 8)
adapter->max_msix_q_vectors = MAX_MSIX_Q_VECTORS_82598;
} else if (hw->mac.type == ixgbe_mac_82599EB) {
adapter->max_msix_q_vectors = MAX_MSIX_Q_VECTORS_82599;
- adapter->flags |= IXGBE_FLAG2_RSC_CAPABLE;
- adapter->flags |= IXGBE_FLAG2_RSC_ENABLED;
+ adapter->flags2 |= IXGBE_FLAG2_RSC_CAPABLE;
+ adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED;
adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
adapter->ring_feature[RING_F_FDIR].indices =
IXGBE_MAX_FDIR_INDICES;
adapter->atr_sample_rate = 20;
adapter->fdir_pballoc = 0;
#ifdef IXGBE_FCOE
- adapter->flags |= IXGBE_FLAG_FCOE_ENABLED;
- adapter->ring_feature[RING_F_FCOE].indices = IXGBE_FCRETA_SIZE;
+ adapter->flags |= IXGBE_FLAG_FCOE_CAPABLE;
+ adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED;
+ adapter->ring_feature[RING_F_FCOE].indices = 0;
#endif /* IXGBE_FCOE */
}
int count = 0;
unsigned int f;
- r_idx = skb->queue_mapping;
- tx_ring = &adapter->tx_ring[r_idx];
-
if (adapter->vlgrp && vlan_tx_tag_present(skb)) {
tx_flags |= vlan_tx_tag_get(skb);
if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
tx_flags <<= IXGBE_TX_FLAGS_VLAN_SHIFT;
tx_flags |= IXGBE_TX_FLAGS_VLAN;
} else if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
- tx_flags |= (skb->queue_mapping << 13);
- tx_flags <<= IXGBE_TX_FLAGS_VLAN_SHIFT;
- tx_flags |= IXGBE_TX_FLAGS_VLAN;
+ if (skb->priority != TC_PRIO_CONTROL) {
+ tx_flags |= (skb->queue_mapping << 13);
+ tx_flags <<= IXGBE_TX_FLAGS_VLAN_SHIFT;
+ tx_flags |= IXGBE_TX_FLAGS_VLAN;
+ } else {
+ skb->queue_mapping =
+ adapter->ring_feature[RING_F_DCB].indices-1;
+ }
}
+ r_idx = skb->queue_mapping;
+ tx_ring = &adapter->tx_ring[r_idx];
+
if ((adapter->flags & IXGBE_FLAG_FCOE_ENABLED) &&
(skb->protocol == htons(ETH_P_FCOE)))
tx_flags |= IXGBE_TX_FLAGS_FCOE;
static void ixgbe_netpoll(struct net_device *netdev)
{
struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ int i;
- disable_irq(adapter->pdev->irq);
adapter->flags |= IXGBE_FLAG_IN_NETPOLL;
- ixgbe_intr(adapter->pdev->irq, netdev);
+ if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
+ int num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+ for (i = 0; i < num_q_vectors; i++) {
+ struct ixgbe_q_vector *q_vector = adapter->q_vector[i];
+ ixgbe_msix_clean_many(0, q_vector);
+ }
+ } else {
+ ixgbe_intr(adapter->pdev->irq, netdev);
+ }
adapter->flags &= ~IXGBE_FLAG_IN_NETPOLL;
- enable_irq(adapter->pdev->irq);
}
#endif
#endif
#ifdef IXGBE_FCOE
- if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
+ if (adapter->flags & IXGBE_FLAG_FCOE_CAPABLE) {
if (hw->mac.ops.get_device_caps) {
hw->mac.ops.get_device_caps(hw, &device_caps);
- if (!(device_caps & IXGBE_DEVICE_CAPS_FCOE_OFFLOADS)) {
- netdev->features |= NETIF_F_FCOE_CRC;
- netdev->features |= NETIF_F_FSO;
- netdev->fcoe_ddp_xid = IXGBE_FCOE_DDP_MAX - 1;
- } else {
- adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED;
- }
+ if (device_caps & IXGBE_DEVICE_CAPS_FCOE_OFFLOADS)
+ adapter->flags &= ~IXGBE_FLAG_FCOE_CAPABLE;
}
}
#endif /* IXGBE_FCOE */
if (pci_using_dac)
netdev->features |= NETIF_F_HIGHDMA;
- if (adapter->flags & IXGBE_FLAG2_RSC_ENABLED)
+ if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)
netdev->features |= NETIF_F_LRO;
/* make sure the EEPROM is good */
adapter->wol = 0;
break;
}
- device_init_wakeup(&adapter->pdev->dev, true);
device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
/* pick up the PCI bus settings for reporting later */
#define IXGBE_ECC_STATUS_82599 0x110E0
#define IXGBE_BAR_CTRL_82599 0x110F4
+/* PCI Express Control */
+#define IXGBE_GCR_CMPL_TMOUT_MASK 0x0000F000
+#define IXGBE_GCR_CMPL_TMOUT_10ms 0x00001000
+#define IXGBE_GCR_CMPL_TMOUT_RESEND 0x00010000
+#define IXGBE_GCR_CAP_VER2 0x00040000
+
/* Time Sync Registers */
#define IXGBE_TSYNCRXCTL 0x05188 /* Rx Time Sync Control register - RW */
#define IXGBE_TSYNCTXCTL 0x08C00 /* Tx Time Sync Control register - RW */
/* PCI Bus Info */
#define IXGBE_PCI_LINK_STATUS 0xB2
+#define IXGBE_PCI_DEVICE_CONTROL2 0xC8
#define IXGBE_PCI_LINK_WIDTH 0x3F0
#define IXGBE_PCI_LINK_WIDTH_1 0x10
#define IXGBE_PCI_LINK_WIDTH_2 0x20
#define IXGBE_PCI_LINK_SPEED_5000 0x2
#define IXGBE_PCI_HEADER_TYPE_REGISTER 0x0E
#define IXGBE_PCI_HEADER_TYPE_MULTIFUNC 0x80
+#define IXGBE_PCI_DEVICE_CONTROL2_16ms 0x0005
/* Number of 100 microseconds we wait for PCI Express master disable */
#define IXGBE_PCI_MASTER_DISABLE_TIMEOUT 800
struct ixpdev_priv *ip = netdev_priv(dev);
struct ixpdev_tx_desc *desc;
int entry;
+ unsigned long flags;
if (unlikely(skb->len > PAGE_SIZE)) {
/* @@@ Count drops. */
dev->trans_start = jiffies;
- local_irq_disable();
+ local_irq_save(flags);
ip->tx_queue_entries++;
if (ip->tx_queue_entries == TX_BUF_COUNT_PER_CHAN)
netif_stop_queue(dev);
- local_irq_enable();
+ local_irq_restore(flags);
return 0;
}
lp = netdev_priv(dev);
lp->device = &pdev->dev;
SET_NETDEV_DEV(dev, &pdev->dev);
+ platform_set_drvdata(pdev, dev);
netdev_boot_setup_check(dev);
--- /dev/null
+/* drivers/net/ks8651.c
+ *
+ * Copyright 2009 Simtec Electronics
+ * http://www.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define DEBUG
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/cache.h>
+#include <linux/crc32.h>
+#include <linux/mii.h>
+
+#include <linux/spi/spi.h>
+
+#include "ks8851.h"
+
+/**
+ * struct ks8851_rxctrl - KS8851 driver rx control
+ * @mchash: Multicast hash-table data.
+ * @rxcr1: KS_RXCR1 register setting
+ * @rxcr2: KS_RXCR2 register setting
+ *
+ * Representation of the settings needs to control the receive filtering
+ * such as the multicast hash-filter and the receive register settings. This
+ * is used to make the job of working out if the receive settings change and
+ * then issuing the new settings to the worker that will send the necessary
+ * commands.
+ */
+struct ks8851_rxctrl {
+ u16 mchash[4];
+ u16 rxcr1;
+ u16 rxcr2;
+};
+
+/**
+ * union ks8851_tx_hdr - tx header data
+ * @txb: The header as bytes
+ * @txw: The header as 16bit, little-endian words
+ *
+ * A dual representation of the tx header data to allow
+ * access to individual bytes, and to allow 16bit accesses
+ * with 16bit alignment.
+ */
+union ks8851_tx_hdr {
+ u8 txb[6];
+ __le16 txw[3];
+};
+
+/**
+ * struct ks8851_net - KS8851 driver private data
+ * @netdev: The network device we're bound to
+ * @spidev: The spi device we're bound to.
+ * @lock: Lock to ensure that the device is not accessed when busy.
+ * @statelock: Lock on this structure for tx list.
+ * @mii: The MII state information for the mii calls.
+ * @rxctrl: RX settings for @rxctrl_work.
+ * @tx_work: Work queue for tx packets
+ * @irq_work: Work queue for servicing interrupts
+ * @rxctrl_work: Work queue for updating RX mode and multicast lists
+ * @txq: Queue of packets for transmission.
+ * @spi_msg1: pre-setup SPI transfer with one message, @spi_xfer1.
+ * @spi_msg2: pre-setup SPI transfer with two messages, @spi_xfer2.
+ * @txh: Space for generating packet TX header in DMA-able data
+ * @rxd: Space for receiving SPI data, in DMA-able space.
+ * @txd: Space for transmitting SPI data, in DMA-able space.
+ * @msg_enable: The message flags controlling driver output (see ethtool).
+ * @fid: Incrementing frame id tag.
+ * @rc_ier: Cached copy of KS_IER.
+ * @rc_rxqcr: Cached copy of KS_RXQCR.
+ *
+ * The @lock ensures that the chip is protected when certain operations are
+ * in progress. When the read or write packet transfer is in progress, most
+ * of the chip registers are not ccessible until the transfer is finished and
+ * the DMA has been de-asserted.
+ *
+ * The @statelock is used to protect information in the structure which may
+ * need to be accessed via several sources, such as the network driver layer
+ * or one of the work queues.
+ *
+ * We align the buffers we may use for rx/tx to ensure that if the SPI driver
+ * wants to DMA map them, it will not have any problems with data the driver
+ * modifies.
+ */
+struct ks8851_net {
+ struct net_device *netdev;
+ struct spi_device *spidev;
+ struct mutex lock;
+ spinlock_t statelock;
+
+ union ks8851_tx_hdr txh ____cacheline_aligned;
+ u8 rxd[8];
+ u8 txd[8];
+
+ u32 msg_enable ____cacheline_aligned;
+ u16 tx_space;
+ u8 fid;
+
+ u16 rc_ier;
+ u16 rc_rxqcr;
+
+ struct mii_if_info mii;
+ struct ks8851_rxctrl rxctrl;
+
+ struct work_struct tx_work;
+ struct work_struct irq_work;
+ struct work_struct rxctrl_work;
+
+ struct sk_buff_head txq;
+
+ struct spi_message spi_msg1;
+ struct spi_message spi_msg2;
+ struct spi_transfer spi_xfer1;
+ struct spi_transfer spi_xfer2[2];
+};
+
+static int msg_enable;
+
+#define ks_info(_ks, _msg...) dev_info(&(_ks)->spidev->dev, _msg)
+#define ks_warn(_ks, _msg...) dev_warn(&(_ks)->spidev->dev, _msg)
+#define ks_dbg(_ks, _msg...) dev_dbg(&(_ks)->spidev->dev, _msg)
+#define ks_err(_ks, _msg...) dev_err(&(_ks)->spidev->dev, _msg)
+
+/* shift for byte-enable data */
+#define BYTE_EN(_x) ((_x) << 2)
+
+/* turn register number and byte-enable mask into data for start of packet */
+#define MK_OP(_byteen, _reg) (BYTE_EN(_byteen) | (_reg) << (8+2) | (_reg) >> 6)
+
+/* SPI register read/write calls.
+ *
+ * All these calls issue SPI transactions to access the chip's registers. They
+ * all require that the necessary lock is held to prevent accesses when the
+ * chip is busy transfering packet data (RX/TX FIFO accesses).
+ */
+
+/**
+ * ks8851_wrreg16 - write 16bit register value to chip
+ * @ks: The chip state
+ * @reg: The register address
+ * @val: The value to write
+ *
+ * Issue a write to put the value @val into the register specified in @reg.
+ */
+static void ks8851_wrreg16(struct ks8851_net *ks, unsigned reg, unsigned val)
+{
+ struct spi_transfer *xfer = &ks->spi_xfer1;
+ struct spi_message *msg = &ks->spi_msg1;
+ __le16 txb[2];
+ int ret;
+
+ txb[0] = cpu_to_le16(MK_OP(reg & 2 ? 0xC : 0x03, reg) | KS_SPIOP_WR);
+ txb[1] = cpu_to_le16(val);
+
+ xfer->tx_buf = txb;
+ xfer->rx_buf = NULL;
+ xfer->len = 4;
+
+ ret = spi_sync(ks->spidev, msg);
+ if (ret < 0)
+ ks_err(ks, "spi_sync() failed\n");
+}
+
+/**
+ * ks8851_rx_1msg - select whether to use one or two messages for spi read
+ * @ks: The device structure
+ *
+ * Return whether to generate a single message with a tx and rx buffer
+ * supplied to spi_sync(), or alternatively send the tx and rx buffers
+ * as separate messages.
+ *
+ * Depending on the hardware in use, a single message may be more efficient
+ * on interrupts or work done by the driver.
+ *
+ * This currently always returns true until we add some per-device data passed
+ * from the platform code to specify which mode is better.
+ */
+static inline bool ks8851_rx_1msg(struct ks8851_net *ks)
+{
+ return true;
+}
+
+/**
+ * ks8851_rdreg - issue read register command and return the data
+ * @ks: The device state
+ * @op: The register address and byte enables in message format.
+ * @rxb: The RX buffer to return the result into
+ * @rxl: The length of data expected.
+ *
+ * This is the low level read call that issues the necessary spi message(s)
+ * to read data from the register specified in @op.
+ */
+static void ks8851_rdreg(struct ks8851_net *ks, unsigned op,
+ u8 *rxb, unsigned rxl)
+{
+ struct spi_transfer *xfer;
+ struct spi_message *msg;
+ __le16 *txb = (__le16 *)ks->txd;
+ u8 *trx = ks->rxd;
+ int ret;
+
+ txb[0] = cpu_to_le16(op | KS_SPIOP_RD);
+
+ if (ks8851_rx_1msg(ks)) {
+ msg = &ks->spi_msg1;
+ xfer = &ks->spi_xfer1;
+
+ xfer->tx_buf = txb;
+ xfer->rx_buf = trx;
+ xfer->len = rxl + 2;
+ } else {
+ msg = &ks->spi_msg2;
+ xfer = ks->spi_xfer2;
+
+ xfer->tx_buf = txb;
+ xfer->rx_buf = NULL;
+ xfer->len = 2;
+
+ xfer++;
+ xfer->tx_buf = NULL;
+ xfer->rx_buf = trx;
+ xfer->len = rxl;
+ }
+
+ ret = spi_sync(ks->spidev, msg);
+ if (ret < 0)
+ ks_err(ks, "read: spi_sync() failed\n");
+ else if (ks8851_rx_1msg(ks))
+ memcpy(rxb, trx + 2, rxl);
+ else
+ memcpy(rxb, trx, rxl);
+}
+
+/**
+ * ks8851_rdreg8 - read 8 bit register from device
+ * @ks: The chip information
+ * @reg: The register address
+ *
+ * Read a 8bit register from the chip, returning the result
+*/
+static unsigned ks8851_rdreg8(struct ks8851_net *ks, unsigned reg)
+{
+ u8 rxb[1];
+
+ ks8851_rdreg(ks, MK_OP(1 << (reg & 3), reg), rxb, 1);
+ return rxb[0];
+}
+
+/**
+ * ks8851_rdreg16 - read 16 bit register from device
+ * @ks: The chip information
+ * @reg: The register address
+ *
+ * Read a 16bit register from the chip, returning the result
+*/
+static unsigned ks8851_rdreg16(struct ks8851_net *ks, unsigned reg)
+{
+ __le16 rx = 0;
+
+ ks8851_rdreg(ks, MK_OP(reg & 2 ? 0xC : 0x3, reg), (u8 *)&rx, 2);
+ return le16_to_cpu(rx);
+}
+
+/**
+ * ks8851_rdreg32 - read 32 bit register from device
+ * @ks: The chip information
+ * @reg: The register address
+ *
+ * Read a 32bit register from the chip.
+ *
+ * Note, this read requires the address be aligned to 4 bytes.
+*/
+static unsigned ks8851_rdreg32(struct ks8851_net *ks, unsigned reg)
+{
+ __le32 rx = 0;
+
+ WARN_ON(reg & 3);
+
+ ks8851_rdreg(ks, MK_OP(0xf, reg), (u8 *)&rx, 4);
+ return le32_to_cpu(rx);
+}
+
+/**
+ * ks8851_soft_reset - issue one of the soft reset to the device
+ * @ks: The device state.
+ * @op: The bit(s) to set in the GRR
+ *
+ * Issue the relevant soft-reset command to the device's GRR register
+ * specified by @op.
+ *
+ * Note, the delays are in there as a caution to ensure that the reset
+ * has time to take effect and then complete. Since the datasheet does
+ * not currently specify the exact sequence, we have chosen something
+ * that seems to work with our device.
+ */
+static void ks8851_soft_reset(struct ks8851_net *ks, unsigned op)
+{
+ ks8851_wrreg16(ks, KS_GRR, op);
+ mdelay(1); /* wait a short time to effect reset */
+ ks8851_wrreg16(ks, KS_GRR, 0);
+ mdelay(1); /* wait for condition to clear */
+}
+
+/**
+ * ks8851_write_mac_addr - write mac address to device registers
+ * @dev: The network device
+ *
+ * Update the KS8851 MAC address registers from the address in @dev.
+ *
+ * This call assumes that the chip is not running, so there is no need to
+ * shutdown the RXQ process whilst setting this.
+*/
+static int ks8851_write_mac_addr(struct net_device *dev)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+ u16 *mcp = (u16 *)dev->dev_addr;
+
+ mutex_lock(&ks->lock);
+
+ ks8851_wrreg16(ks, KS_MARL, mcp[0]);
+ ks8851_wrreg16(ks, KS_MARM, mcp[1]);
+ ks8851_wrreg16(ks, KS_MARH, mcp[2]);
+
+ mutex_unlock(&ks->lock);
+
+ return 0;
+}
+
+/**
+ * ks8851_init_mac - initialise the mac address
+ * @ks: The device structure
+ *
+ * Get or create the initial mac address for the device and then set that
+ * into the station address register. Currently we assume that the device
+ * does not have a valid mac address in it, and so we use random_ether_addr()
+ * to create a new one.
+ *
+ * In future, the driver should check to see if the device has an EEPROM
+ * attached and whether that has a valid ethernet address in it.
+ */
+static void ks8851_init_mac(struct ks8851_net *ks)
+{
+ struct net_device *dev = ks->netdev;
+
+ random_ether_addr(dev->dev_addr);
+ ks8851_write_mac_addr(dev);
+}
+
+/**
+ * ks8851_irq - device interrupt handler
+ * @irq: Interrupt number passed from the IRQ hnalder.
+ * @pw: The private word passed to register_irq(), our struct ks8851_net.
+ *
+ * Disable the interrupt from happening again until we've processed the
+ * current status by scheduling ks8851_irq_work().
+ */
+static irqreturn_t ks8851_irq(int irq, void *pw)
+{
+ struct ks8851_net *ks = pw;
+
+ disable_irq_nosync(irq);
+ schedule_work(&ks->irq_work);
+ return IRQ_HANDLED;
+}
+
+/**
+ * ks8851_rdfifo - read data from the receive fifo
+ * @ks: The device state.
+ * @buff: The buffer address
+ * @len: The length of the data to read
+ *
+ * Issue an RXQ FIFO read command and read the @len ammount of data from
+ * the FIFO into the buffer specified by @buff.
+ */
+static void ks8851_rdfifo(struct ks8851_net *ks, u8 *buff, unsigned len)
+{
+ struct spi_transfer *xfer = ks->spi_xfer2;
+ struct spi_message *msg = &ks->spi_msg2;
+ u8 txb[1];
+ int ret;
+
+ if (netif_msg_rx_status(ks))
+ ks_dbg(ks, "%s: %d@%p\n", __func__, len, buff);
+
+ /* set the operation we're issuing */
+ txb[0] = KS_SPIOP_RXFIFO;
+
+ xfer->tx_buf = txb;
+ xfer->rx_buf = NULL;
+ xfer->len = 1;
+
+ xfer++;
+ xfer->rx_buf = buff;
+ xfer->tx_buf = NULL;
+ xfer->len = len;
+
+ ret = spi_sync(ks->spidev, msg);
+ if (ret < 0)
+ ks_err(ks, "%s: spi_sync() failed\n", __func__);
+}
+
+/**
+ * ks8851_dbg_dumpkkt - dump initial packet contents to debug
+ * @ks: The device state
+ * @rxpkt: The data for the received packet
+ *
+ * Dump the initial data from the packet to dev_dbg().
+*/
+static void ks8851_dbg_dumpkkt(struct ks8851_net *ks, u8 *rxpkt)
+{
+ ks_dbg(ks, "pkt %02x%02x%02x%02x %02x%02x%02x%02x %02x%02x%02x%02x\n",
+ rxpkt[4], rxpkt[5], rxpkt[6], rxpkt[7],
+ rxpkt[8], rxpkt[9], rxpkt[10], rxpkt[11],
+ rxpkt[12], rxpkt[13], rxpkt[14], rxpkt[15]);
+}
+
+/**
+ * ks8851_rx_pkts - receive packets from the host
+ * @ks: The device information.
+ *
+ * This is called from the IRQ work queue when the system detects that there
+ * are packets in the receive queue. Find out how many packets there are and
+ * read them from the FIFO.
+ */
+static void ks8851_rx_pkts(struct ks8851_net *ks)
+{
+ struct sk_buff *skb;
+ unsigned rxfc;
+ unsigned rxlen;
+ unsigned rxstat;
+ u32 rxh;
+ u8 *rxpkt;
+
+ rxfc = ks8851_rdreg8(ks, KS_RXFC);
+
+ if (netif_msg_rx_status(ks))
+ ks_dbg(ks, "%s: %d packets\n", __func__, rxfc);
+
+ /* Currently we're issuing a read per packet, but we could possibly
+ * improve the code by issuing a single read, getting the receive
+ * header, allocating the packet and then reading the packet data
+ * out in one go.
+ *
+ * This form of operation would require us to hold the SPI bus'
+ * chipselect low during the entie transaction to avoid any
+ * reset to the data stream comming from the chip.
+ */
+
+ for (; rxfc != 0; rxfc--) {
+ rxh = ks8851_rdreg32(ks, KS_RXFHSR);
+ rxstat = rxh & 0xffff;
+ rxlen = rxh >> 16;
+
+ if (netif_msg_rx_status(ks))
+ ks_dbg(ks, "rx: stat 0x%04x, len 0x%04x\n",
+ rxstat, rxlen);
+
+ /* the length of the packet includes the 32bit CRC */
+
+ /* set dma read address */
+ ks8851_wrreg16(ks, KS_RXFDPR, RXFDPR_RXFPAI | 0x00);
+
+ /* start the packet dma process, and set auto-dequeue rx */
+ ks8851_wrreg16(ks, KS_RXQCR,
+ ks->rc_rxqcr | RXQCR_SDA | RXQCR_ADRFE);
+
+ if (rxlen > 0) {
+ skb = netdev_alloc_skb(ks->netdev, rxlen + 2 + 8);
+ if (!skb) {
+ /* todo - dump frame and move on */
+ }
+
+ /* two bytes to ensure ip is aligned, and four bytes
+ * for the status header and 4 bytes of garbage */
+ skb_reserve(skb, 2 + 4 + 4);
+
+ rxpkt = skb_put(skb, rxlen - 4) - 8;
+
+ /* align the packet length to 4 bytes, and add 4 bytes
+ * as we're getting the rx status header as well */
+ ks8851_rdfifo(ks, rxpkt, ALIGN(rxlen, 4) + 8);
+
+ if (netif_msg_pktdata(ks))
+ ks8851_dbg_dumpkkt(ks, rxpkt);
+
+ skb->protocol = eth_type_trans(skb, ks->netdev);
+ netif_rx(skb);
+
+ ks->netdev->stats.rx_packets++;
+ ks->netdev->stats.rx_bytes += rxlen - 4;
+ }
+
+ ks8851_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr);
+ }
+}
+
+/**
+ * ks8851_irq_work - work queue handler for dealing with interrupt requests
+ * @work: The work structure that was scheduled by schedule_work()
+ *
+ * This is the handler invoked when the ks8851_irq() is called to find out
+ * what happened, as we cannot allow ourselves to sleep whilst waiting for
+ * anything other process has the chip's lock.
+ *
+ * Read the interrupt status, work out what needs to be done and then clear
+ * any of the interrupts that are not needed.
+ */
+static void ks8851_irq_work(struct work_struct *work)
+{
+ struct ks8851_net *ks = container_of(work, struct ks8851_net, irq_work);
+ unsigned status;
+ unsigned handled = 0;
+
+ mutex_lock(&ks->lock);
+
+ status = ks8851_rdreg16(ks, KS_ISR);
+
+ if (netif_msg_intr(ks))
+ dev_dbg(&ks->spidev->dev, "%s: status 0x%04x\n",
+ __func__, status);
+
+ if (status & IRQ_LCI) {
+ /* should do something about checking link status */
+ handled |= IRQ_LCI;
+ }
+
+ if (status & IRQ_LDI) {
+ u16 pmecr = ks8851_rdreg16(ks, KS_PMECR);
+ pmecr &= ~PMECR_WKEVT_MASK;
+ ks8851_wrreg16(ks, KS_PMECR, pmecr | PMECR_WKEVT_LINK);
+
+ handled |= IRQ_LDI;
+ }
+
+ if (status & IRQ_RXPSI)
+ handled |= IRQ_RXPSI;
+
+ if (status & IRQ_TXI) {
+ handled |= IRQ_TXI;
+
+ /* no lock here, tx queue should have been stopped */
+
+ /* update our idea of how much tx space is available to the
+ * system */
+ ks->tx_space = ks8851_rdreg16(ks, KS_TXMIR);
+
+ if (netif_msg_intr(ks))
+ ks_dbg(ks, "%s: txspace %d\n", __func__, ks->tx_space);
+ }
+
+ if (status & IRQ_RXI)
+ handled |= IRQ_RXI;
+
+ if (status & IRQ_SPIBEI) {
+ dev_err(&ks->spidev->dev, "%s: spi bus error\n", __func__);
+ handled |= IRQ_SPIBEI;
+ }
+
+ ks8851_wrreg16(ks, KS_ISR, handled);
+
+ if (status & IRQ_RXI) {
+ /* the datasheet says to disable the rx interrupt during
+ * packet read-out, however we're masking the interrupt
+ * from the device so do not bother masking just the RX
+ * from the device. */
+
+ ks8851_rx_pkts(ks);
+ }
+
+ /* if something stopped the rx process, probably due to wanting
+ * to change the rx settings, then do something about restarting
+ * it. */
+ if (status & IRQ_RXPSI) {
+ struct ks8851_rxctrl *rxc = &ks->rxctrl;
+
+ /* update the multicast hash table */
+ ks8851_wrreg16(ks, KS_MAHTR0, rxc->mchash[0]);
+ ks8851_wrreg16(ks, KS_MAHTR1, rxc->mchash[1]);
+ ks8851_wrreg16(ks, KS_MAHTR2, rxc->mchash[2]);
+ ks8851_wrreg16(ks, KS_MAHTR3, rxc->mchash[3]);
+
+ ks8851_wrreg16(ks, KS_RXCR2, rxc->rxcr2);
+ ks8851_wrreg16(ks, KS_RXCR1, rxc->rxcr1);
+ }
+
+ mutex_unlock(&ks->lock);
+
+ if (status & IRQ_TXI)
+ netif_wake_queue(ks->netdev);
+
+ enable_irq(ks->netdev->irq);
+}
+
+/**
+ * calc_txlen - calculate size of message to send packet
+ * @len: Lenght of data
+ *
+ * Returns the size of the TXFIFO message needed to send
+ * this packet.
+ */
+static inline unsigned calc_txlen(unsigned len)
+{
+ return ALIGN(len + 4, 4);
+}
+
+/**
+ * ks8851_wrpkt - write packet to TX FIFO
+ * @ks: The device state.
+ * @txp: The sk_buff to transmit.
+ * @irq: IRQ on completion of the packet.
+ *
+ * Send the @txp to the chip. This means creating the relevant packet header
+ * specifying the length of the packet and the other information the chip
+ * needs, such as IRQ on completion. Send the header and the packet data to
+ * the device.
+ */
+static void ks8851_wrpkt(struct ks8851_net *ks, struct sk_buff *txp, bool irq)
+{
+ struct spi_transfer *xfer = ks->spi_xfer2;
+ struct spi_message *msg = &ks->spi_msg2;
+ unsigned fid = 0;
+ int ret;
+
+ if (netif_msg_tx_queued(ks))
+ dev_dbg(&ks->spidev->dev, "%s: skb %p, %d@%p, irq %d\n",
+ __func__, txp, txp->len, txp->data, irq);
+
+ fid = ks->fid++;
+ fid &= TXFR_TXFID_MASK;
+
+ if (irq)
+ fid |= TXFR_TXIC; /* irq on completion */
+
+ /* start header at txb[1] to align txw entries */
+ ks->txh.txb[1] = KS_SPIOP_TXFIFO;
+ ks->txh.txw[1] = cpu_to_le16(fid);
+ ks->txh.txw[2] = cpu_to_le16(txp->len);
+
+ xfer->tx_buf = &ks->txh.txb[1];
+ xfer->rx_buf = NULL;
+ xfer->len = 5;
+
+ xfer++;
+ xfer->tx_buf = txp->data;
+ xfer->rx_buf = NULL;
+ xfer->len = ALIGN(txp->len, 4);
+
+ ret = spi_sync(ks->spidev, msg);
+ if (ret < 0)
+ ks_err(ks, "%s: spi_sync() failed\n", __func__);
+}
+
+/**
+ * ks8851_done_tx - update and then free skbuff after transmitting
+ * @ks: The device state
+ * @txb: The buffer transmitted
+ */
+static void ks8851_done_tx(struct ks8851_net *ks, struct sk_buff *txb)
+{
+ struct net_device *dev = ks->netdev;
+
+ dev->stats.tx_bytes += txb->len;
+ dev->stats.tx_packets++;
+
+ dev_kfree_skb(txb);
+}
+
+/**
+ * ks8851_tx_work - process tx packet(s)
+ * @work: The work strucutre what was scheduled.
+ *
+ * This is called when a number of packets have been scheduled for
+ * transmission and need to be sent to the device.
+ */
+static void ks8851_tx_work(struct work_struct *work)
+{
+ struct ks8851_net *ks = container_of(work, struct ks8851_net, tx_work);
+ struct sk_buff *txb;
+ bool last = false;
+
+ mutex_lock(&ks->lock);
+
+ while (!last) {
+ txb = skb_dequeue(&ks->txq);
+ last = skb_queue_empty(&ks->txq);
+
+ ks8851_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr | RXQCR_SDA);
+ ks8851_wrpkt(ks, txb, last);
+ ks8851_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr);
+ ks8851_wrreg16(ks, KS_TXQCR, TXQCR_METFE);
+
+ ks8851_done_tx(ks, txb);
+ }
+
+ mutex_unlock(&ks->lock);
+}
+
+/**
+ * ks8851_set_powermode - set power mode of the device
+ * @ks: The device state
+ * @pwrmode: The power mode value to write to KS_PMECR.
+ *
+ * Change the power mode of the chip.
+ */
+static void ks8851_set_powermode(struct ks8851_net *ks, unsigned pwrmode)
+{
+ unsigned pmecr;
+
+ if (netif_msg_hw(ks))
+ ks_dbg(ks, "setting power mode %d\n", pwrmode);
+
+ pmecr = ks8851_rdreg16(ks, KS_PMECR);
+ pmecr &= ~PMECR_PM_MASK;
+ pmecr |= pwrmode;
+
+ ks8851_wrreg16(ks, KS_PMECR, pmecr);
+}
+
+/**
+ * ks8851_net_open - open network device
+ * @dev: The network device being opened.
+ *
+ * Called when the network device is marked active, such as a user executing
+ * 'ifconfig up' on the device.
+ */
+static int ks8851_net_open(struct net_device *dev)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+
+ /* lock the card, even if we may not actually be doing anything
+ * else at the moment */
+ mutex_lock(&ks->lock);
+
+ if (netif_msg_ifup(ks))
+ ks_dbg(ks, "opening %s\n", dev->name);
+
+ /* bring chip out of any power saving mode it was in */
+ ks8851_set_powermode(ks, PMECR_PM_NORMAL);
+
+ /* issue a soft reset to the RX/TX QMU to put it into a known
+ * state. */
+ ks8851_soft_reset(ks, GRR_QMU);
+
+ /* setup transmission parameters */
+
+ ks8851_wrreg16(ks, KS_TXCR, (TXCR_TXE | /* enable transmit process */
+ TXCR_TXPE | /* pad to min length */
+ TXCR_TXCRC | /* add CRC */
+ TXCR_TXFCE)); /* enable flow control */
+
+ /* auto-increment tx data, reset tx pointer */
+ ks8851_wrreg16(ks, KS_TXFDPR, TXFDPR_TXFPAI);
+
+ /* setup receiver control */
+
+ ks8851_wrreg16(ks, KS_RXCR1, (RXCR1_RXPAFMA | /* from mac filter */
+ RXCR1_RXFCE | /* enable flow control */
+ RXCR1_RXBE | /* broadcast enable */
+ RXCR1_RXUE | /* unicast enable */
+ RXCR1_RXE)); /* enable rx block */
+
+ /* transfer entire frames out in one go */
+ ks8851_wrreg16(ks, KS_RXCR2, RXCR2_SRDBL_FRAME);
+
+ /* set receive counter timeouts */
+ ks8851_wrreg16(ks, KS_RXDTTR, 1000); /* 1ms after first frame to IRQ */
+ ks8851_wrreg16(ks, KS_RXDBCTR, 4096); /* >4Kbytes in buffer to IRQ */
+ ks8851_wrreg16(ks, KS_RXFCTR, 10); /* 10 frames to IRQ */
+
+ ks->rc_rxqcr = (RXQCR_RXFCTE | /* IRQ on frame count exceeded */
+ RXQCR_RXDBCTE | /* IRQ on byte count exceeded */
+ RXQCR_RXDTTE); /* IRQ on time exceeded */
+
+ ks8851_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr);
+
+ /* clear then enable interrupts */
+
+#define STD_IRQ (IRQ_LCI | /* Link Change */ \
+ IRQ_TXI | /* TX done */ \
+ IRQ_RXI | /* RX done */ \
+ IRQ_SPIBEI | /* SPI bus error */ \
+ IRQ_TXPSI | /* TX process stop */ \
+ IRQ_RXPSI) /* RX process stop */
+
+ ks->rc_ier = STD_IRQ;
+ ks8851_wrreg16(ks, KS_ISR, STD_IRQ);
+ ks8851_wrreg16(ks, KS_IER, STD_IRQ);
+
+ netif_start_queue(ks->netdev);
+
+ if (netif_msg_ifup(ks))
+ ks_dbg(ks, "network device %s up\n", dev->name);
+
+ mutex_unlock(&ks->lock);
+ return 0;
+}
+
+/**
+ * ks8851_net_stop - close network device
+ * @dev: The device being closed.
+ *
+ * Called to close down a network device which has been active. Cancell any
+ * work, shutdown the RX and TX process and then place the chip into a low
+ * power state whilst it is not being used.
+ */
+static int ks8851_net_stop(struct net_device *dev)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+
+ if (netif_msg_ifdown(ks))
+ ks_info(ks, "%s: shutting down\n", dev->name);
+
+ netif_stop_queue(dev);
+
+ mutex_lock(&ks->lock);
+
+ /* stop any outstanding work */
+ flush_work(&ks->irq_work);
+ flush_work(&ks->tx_work);
+ flush_work(&ks->rxctrl_work);
+
+ /* turn off the IRQs and ack any outstanding */
+ ks8851_wrreg16(ks, KS_IER, 0x0000);
+ ks8851_wrreg16(ks, KS_ISR, 0xffff);
+
+ /* shutdown RX process */
+ ks8851_wrreg16(ks, KS_RXCR1, 0x0000);
+
+ /* shutdown TX process */
+ ks8851_wrreg16(ks, KS_TXCR, 0x0000);
+
+ /* set powermode to soft power down to save power */
+ ks8851_set_powermode(ks, PMECR_PM_SOFTDOWN);
+
+ /* ensure any queued tx buffers are dumped */
+ while (!skb_queue_empty(&ks->txq)) {
+ struct sk_buff *txb = skb_dequeue(&ks->txq);
+
+ if (netif_msg_ifdown(ks))
+ ks_dbg(ks, "%s: freeing txb %p\n", __func__, txb);
+
+ dev_kfree_skb(txb);
+ }
+
+ mutex_unlock(&ks->lock);
+ return 0;
+}
+
+/**
+ * ks8851_start_xmit - transmit packet
+ * @skb: The buffer to transmit
+ * @dev: The device used to transmit the packet.
+ *
+ * Called by the network layer to transmit the @skb. Queue the packet for
+ * the device and schedule the necessary work to transmit the packet when
+ * it is free.
+ *
+ * We do this to firstly avoid sleeping with the network device locked,
+ * and secondly so we can round up more than one packet to transmit which
+ * means we can try and avoid generating too many transmit done interrupts.
+ */
+static int ks8851_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+ unsigned needed = calc_txlen(skb->len);
+ int ret = NETDEV_TX_OK;
+
+ if (netif_msg_tx_queued(ks))
+ ks_dbg(ks, "%s: skb %p, %d@%p\n", __func__,
+ skb, skb->len, skb->data);
+
+ spin_lock(&ks->statelock);
+
+ if (needed > ks->tx_space) {
+ netif_stop_queue(dev);
+ ret = NETDEV_TX_BUSY;
+ } else {
+ ks->tx_space -= needed;
+ skb_queue_tail(&ks->txq, skb);
+ }
+
+ spin_unlock(&ks->statelock);
+ schedule_work(&ks->tx_work);
+
+ return ret;
+}
+
+/**
+ * ks8851_rxctrl_work - work handler to change rx mode
+ * @work: The work structure this belongs to.
+ *
+ * Lock the device and issue the necessary changes to the receive mode from
+ * the network device layer. This is done so that we can do this without
+ * having to sleep whilst holding the network device lock.
+ *
+ * Since the recommendation from Micrel is that the RXQ is shutdown whilst the
+ * receive parameters are programmed, we issue a write to disable the RXQ and
+ * then wait for the interrupt handler to be triggered once the RXQ shutdown is
+ * complete. The interrupt handler then writes the new values into the chip.
+ */
+static void ks8851_rxctrl_work(struct work_struct *work)
+{
+ struct ks8851_net *ks = container_of(work, struct ks8851_net, rxctrl_work);
+
+ mutex_lock(&ks->lock);
+
+ /* need to shutdown RXQ before modifying filter parameters */
+ ks8851_wrreg16(ks, KS_RXCR1, 0x00);
+
+ mutex_unlock(&ks->lock);
+}
+
+static void ks8851_set_rx_mode(struct net_device *dev)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+ struct ks8851_rxctrl rxctrl;
+
+ memset(&rxctrl, 0, sizeof(rxctrl));
+
+ if (dev->flags & IFF_PROMISC) {
+ /* interface to receive everything */
+
+ rxctrl.rxcr1 = RXCR1_RXAE | RXCR1_RXINVF;
+ } else if (dev->flags & IFF_ALLMULTI) {
+ /* accept all multicast packets */
+
+ rxctrl.rxcr1 = (RXCR1_RXME | RXCR1_RXAE |
+ RXCR1_RXPAFMA | RXCR1_RXMAFMA);
+ } else if (dev->flags & IFF_MULTICAST && dev->mc_count > 0) {
+ struct dev_mc_list *mcptr = dev->mc_list;
+ u32 crc;
+ int i;
+
+ /* accept some multicast */
+
+ for (i = dev->mc_count; i > 0; i--) {
+ crc = ether_crc(ETH_ALEN, mcptr->dmi_addr);
+ crc >>= (32 - 6); /* get top six bits */
+
+ rxctrl.mchash[crc >> 4] |= (1 << (crc & 0xf));
+ mcptr = mcptr->next;
+ }
+
+ rxctrl.rxcr1 = RXCR1_RXME | RXCR1_RXAE | RXCR1_RXPAFMA;
+ } else {
+ /* just accept broadcast / unicast */
+ rxctrl.rxcr1 = RXCR1_RXPAFMA;
+ }
+
+ rxctrl.rxcr1 |= (RXCR1_RXUE | /* unicast enable */
+ RXCR1_RXBE | /* broadcast enable */
+ RXCR1_RXE | /* RX process enable */
+ RXCR1_RXFCE); /* enable flow control */
+
+ rxctrl.rxcr2 |= RXCR2_SRDBL_FRAME;
+
+ /* schedule work to do the actual set of the data if needed */
+
+ spin_lock(&ks->statelock);
+
+ if (memcmp(&rxctrl, &ks->rxctrl, sizeof(rxctrl)) != 0) {
+ memcpy(&ks->rxctrl, &rxctrl, sizeof(ks->rxctrl));
+ schedule_work(&ks->rxctrl_work);
+ }
+
+ spin_unlock(&ks->statelock);
+}
+
+static int ks8851_set_mac_address(struct net_device *dev, void *addr)
+{
+ struct sockaddr *sa = addr;
+
+ if (netif_running(dev))
+ return -EBUSY;
+
+ if (!is_valid_ether_addr(sa->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(dev->dev_addr, sa->sa_data, ETH_ALEN);
+ return ks8851_write_mac_addr(dev);
+}
+
+static int ks8851_net_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+
+ if (!netif_running(dev))
+ return -EINVAL;
+
+ return generic_mii_ioctl(&ks->mii, if_mii(req), cmd, NULL);
+}
+
+static const struct net_device_ops ks8851_netdev_ops = {
+ .ndo_open = ks8851_net_open,
+ .ndo_stop = ks8851_net_stop,
+ .ndo_do_ioctl = ks8851_net_ioctl,
+ .ndo_start_xmit = ks8851_start_xmit,
+ .ndo_set_mac_address = ks8851_set_mac_address,
+ .ndo_set_rx_mode = ks8851_set_rx_mode,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
+/* ethtool support */
+
+static void ks8851_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *di)
+{
+ strlcpy(di->driver, "KS8851", sizeof(di->driver));
+ strlcpy(di->version, "1.00", sizeof(di->version));
+ strlcpy(di->bus_info, dev_name(dev->dev.parent), sizeof(di->bus_info));
+}
+
+static u32 ks8851_get_msglevel(struct net_device *dev)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+ return ks->msg_enable;
+}
+
+static void ks8851_set_msglevel(struct net_device *dev, u32 to)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+ ks->msg_enable = to;
+}
+
+static int ks8851_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+ return mii_ethtool_gset(&ks->mii, cmd);
+}
+
+static int ks8851_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+ return mii_ethtool_sset(&ks->mii, cmd);
+}
+
+static u32 ks8851_get_link(struct net_device *dev)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+ return mii_link_ok(&ks->mii);
+}
+
+static int ks8851_nway_reset(struct net_device *dev)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+ return mii_nway_restart(&ks->mii);
+}
+
+static const struct ethtool_ops ks8851_ethtool_ops = {
+ .get_drvinfo = ks8851_get_drvinfo,
+ .get_msglevel = ks8851_get_msglevel,
+ .set_msglevel = ks8851_set_msglevel,
+ .get_settings = ks8851_get_settings,
+ .set_settings = ks8851_set_settings,
+ .get_link = ks8851_get_link,
+ .nway_reset = ks8851_nway_reset,
+};
+
+/* MII interface controls */
+
+/**
+ * ks8851_phy_reg - convert MII register into a KS8851 register
+ * @reg: MII register number.
+ *
+ * Return the KS8851 register number for the corresponding MII PHY register
+ * if possible. Return zero if the MII register has no direct mapping to the
+ * KS8851 register set.
+ */
+static int ks8851_phy_reg(int reg)
+{
+ switch (reg) {
+ case MII_BMCR:
+ return KS_P1MBCR;
+ case MII_BMSR:
+ return KS_P1MBSR;
+ case MII_PHYSID1:
+ return KS_PHY1ILR;
+ case MII_PHYSID2:
+ return KS_PHY1IHR;
+ case MII_ADVERTISE:
+ return KS_P1ANAR;
+ case MII_LPA:
+ return KS_P1ANLPR;
+ }
+
+ return 0x0;
+}
+
+/**
+ * ks8851_phy_read - MII interface PHY register read.
+ * @dev: The network device the PHY is on.
+ * @phy_addr: Address of PHY (ignored as we only have one)
+ * @reg: The register to read.
+ *
+ * This call reads data from the PHY register specified in @reg. Since the
+ * device does not support all the MII registers, the non-existant values
+ * are always returned as zero.
+ *
+ * We return zero for unsupported registers as the MII code does not check
+ * the value returned for any error status, and simply returns it to the
+ * caller. The mii-tool that the driver was tested with takes any -ve error
+ * as real PHY capabilities, thus displaying incorrect data to the user.
+ */
+static int ks8851_phy_read(struct net_device *dev, int phy_addr, int reg)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+ int ksreg;
+ int result;
+
+ ksreg = ks8851_phy_reg(reg);
+ if (!ksreg)
+ return 0x0; /* no error return allowed, so use zero */
+
+ mutex_lock(&ks->lock);
+ result = ks8851_rdreg16(ks, ksreg);
+ mutex_unlock(&ks->lock);
+
+ return result;
+}
+
+static void ks8851_phy_write(struct net_device *dev,
+ int phy, int reg, int value)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+ int ksreg;
+
+ ksreg = ks8851_phy_reg(reg);
+ if (ksreg) {
+ mutex_lock(&ks->lock);
+ ks8851_wrreg16(ks, ksreg, value);
+ mutex_unlock(&ks->lock);
+ }
+}
+
+/**
+ * ks8851_read_selftest - read the selftest memory info.
+ * @ks: The device state
+ *
+ * Read and check the TX/RX memory selftest information.
+ */
+static int ks8851_read_selftest(struct ks8851_net *ks)
+{
+ unsigned both_done = MBIR_TXMBF | MBIR_RXMBF;
+ int ret = 0;
+ unsigned rd;
+
+ rd = ks8851_rdreg16(ks, KS_MBIR);
+
+ if ((rd & both_done) != both_done) {
+ ks_warn(ks, "Memory selftest not finished\n");
+ return 0;
+ }
+
+ if (rd & MBIR_TXMBFA) {
+ ks_err(ks, "TX memory selftest fail\n");
+ ret |= 1;
+ }
+
+ if (rd & MBIR_RXMBFA) {
+ ks_err(ks, "RX memory selftest fail\n");
+ ret |= 2;
+ }
+
+ return 0;
+}
+
+/* driver bus management functions */
+
+static int __devinit ks8851_probe(struct spi_device *spi)
+{
+ struct net_device *ndev;
+ struct ks8851_net *ks;
+ int ret;
+
+ ndev = alloc_etherdev(sizeof(struct ks8851_net));
+ if (!ndev) {
+ dev_err(&spi->dev, "failed to alloc ethernet device\n");
+ return -ENOMEM;
+ }
+
+ spi->bits_per_word = 8;
+
+ ks = netdev_priv(ndev);
+
+ ks->netdev = ndev;
+ ks->spidev = spi;
+ ks->tx_space = 6144;
+
+ mutex_init(&ks->lock);
+ spin_lock_init(&ks->statelock);
+
+ INIT_WORK(&ks->tx_work, ks8851_tx_work);
+ INIT_WORK(&ks->irq_work, ks8851_irq_work);
+ INIT_WORK(&ks->rxctrl_work, ks8851_rxctrl_work);
+
+ /* initialise pre-made spi transfer messages */
+
+ spi_message_init(&ks->spi_msg1);
+ spi_message_add_tail(&ks->spi_xfer1, &ks->spi_msg1);
+
+ spi_message_init(&ks->spi_msg2);
+ spi_message_add_tail(&ks->spi_xfer2[0], &ks->spi_msg2);
+ spi_message_add_tail(&ks->spi_xfer2[1], &ks->spi_msg2);
+
+ /* setup mii state */
+ ks->mii.dev = ndev;
+ ks->mii.phy_id = 1,
+ ks->mii.phy_id_mask = 1;
+ ks->mii.reg_num_mask = 0xf;
+ ks->mii.mdio_read = ks8851_phy_read;
+ ks->mii.mdio_write = ks8851_phy_write;
+
+ dev_info(&spi->dev, "message enable is %d\n", msg_enable);
+
+ /* set the default message enable */
+ ks->msg_enable = netif_msg_init(msg_enable, (NETIF_MSG_DRV |
+ NETIF_MSG_PROBE |
+ NETIF_MSG_LINK));
+
+ skb_queue_head_init(&ks->txq);
+
+ SET_ETHTOOL_OPS(ndev, &ks8851_ethtool_ops);
+ SET_NETDEV_DEV(ndev, &spi->dev);
+
+ dev_set_drvdata(&spi->dev, ks);
+
+ ndev->if_port = IF_PORT_100BASET;
+ ndev->netdev_ops = &ks8851_netdev_ops;
+ ndev->irq = spi->irq;
+
+ /* simple check for a valid chip being connected to the bus */
+
+ if ((ks8851_rdreg16(ks, KS_CIDER) & ~CIDER_REV_MASK) != CIDER_ID) {
+ dev_err(&spi->dev, "failed to read device ID\n");
+ ret = -ENODEV;
+ goto err_id;
+ }
+
+ ks8851_read_selftest(ks);
+ ks8851_init_mac(ks);
+
+ ret = request_irq(spi->irq, ks8851_irq, IRQF_TRIGGER_LOW,
+ ndev->name, ks);
+ if (ret < 0) {
+ dev_err(&spi->dev, "failed to get irq\n");
+ goto err_irq;
+ }
+
+ ret = register_netdev(ndev);
+ if (ret) {
+ dev_err(&spi->dev, "failed to register network device\n");
+ goto err_netdev;
+ }
+
+ dev_info(&spi->dev, "revision %d, MAC %pM, IRQ %d\n",
+ CIDER_REV_GET(ks8851_rdreg16(ks, KS_CIDER)),
+ ndev->dev_addr, ndev->irq);
+
+ return 0;
+
+
+err_netdev:
+ free_irq(ndev->irq, ndev);
+
+err_id:
+err_irq:
+ free_netdev(ndev);
+ return ret;
+}
+
+static int __devexit ks8851_remove(struct spi_device *spi)
+{
+ struct ks8851_net *priv = dev_get_drvdata(&spi->dev);
+
+ if (netif_msg_drv(priv))
+ dev_info(&spi->dev, "remove");
+
+ unregister_netdev(priv->netdev);
+ free_irq(spi->irq, priv);
+ free_netdev(priv->netdev);
+
+ return 0;
+}
+
+static struct spi_driver ks8851_driver = {
+ .driver = {
+ .name = "ks8851",
+ .owner = THIS_MODULE,
+ },
+ .probe = ks8851_probe,
+ .remove = __devexit_p(ks8851_remove),
+};
+
+static int __init ks8851_init(void)
+{
+ return spi_register_driver(&ks8851_driver);
+}
+
+static void __exit ks8851_exit(void)
+{
+ spi_unregister_driver(&ks8851_driver);
+}
+
+module_init(ks8851_init);
+module_exit(ks8851_exit);
+
+MODULE_DESCRIPTION("KS8851 Network driver");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL");
+
+module_param_named(message, msg_enable, int, 0);
+MODULE_PARM_DESC(message, "Message verbosity level (0=none, 31=all)");
--- /dev/null
+/* drivers/net/ks8851.h
+ *
+ * Copyright 2009 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * KS8851 register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define KS_CCR 0x08
+#define CCR_EEPROM (1 << 9)
+#define CCR_SPI (1 << 8)
+#define CCR_32PIN (1 << 0)
+
+/* MAC address registers */
+#define KS_MARL 0x10
+#define KS_MARM 0x12
+#define KS_MARH 0x14
+
+#define KS_OBCR 0x20
+#define OBCR_ODS_16mA (1 << 6)
+
+#define KS_EEPCR 0x22
+#define EEPCR_EESA (1 << 4)
+#define EEPCR_EESB (1 << 3)
+#define EEPCR_EEDO (1 << 2)
+#define EEPCR_EESCK (1 << 1)
+#define EEPCR_EECS (1 << 0)
+
+#define KS_MBIR 0x24
+#define MBIR_TXMBF (1 << 12)
+#define MBIR_TXMBFA (1 << 11)
+#define MBIR_RXMBF (1 << 4)
+#define MBIR_RXMBFA (1 << 3)
+
+#define KS_GRR 0x26
+#define GRR_QMU (1 << 1)
+#define GRR_GSR (1 << 0)
+
+#define KS_WFCR 0x2A
+#define WFCR_MPRXE (1 << 7)
+#define WFCR_WF3E (1 << 3)
+#define WFCR_WF2E (1 << 2)
+#define WFCR_WF1E (1 << 1)
+#define WFCR_WF0E (1 << 0)
+
+#define KS_WF0CRC0 0x30
+#define KS_WF0CRC1 0x32
+#define KS_WF0BM0 0x34
+#define KS_WF0BM1 0x36
+#define KS_WF0BM2 0x38
+#define KS_WF0BM3 0x3A
+
+#define KS_WF1CRC0 0x40
+#define KS_WF1CRC1 0x42
+#define KS_WF1BM0 0x44
+#define KS_WF1BM1 0x46
+#define KS_WF1BM2 0x48
+#define KS_WF1BM3 0x4A
+
+#define KS_WF2CRC0 0x50
+#define KS_WF2CRC1 0x52
+#define KS_WF2BM0 0x54
+#define KS_WF2BM1 0x56
+#define KS_WF2BM2 0x58
+#define KS_WF2BM3 0x5A
+
+#define KS_WF3CRC0 0x60
+#define KS_WF3CRC1 0x62
+#define KS_WF3BM0 0x64
+#define KS_WF3BM1 0x66
+#define KS_WF3BM2 0x68
+#define KS_WF3BM3 0x6A
+
+#define KS_TXCR 0x70
+#define TXCR_TCGICMP (1 << 8)
+#define TXCR_TCGUDP (1 << 7)
+#define TXCR_TCGTCP (1 << 6)
+#define TXCR_TCGIP (1 << 5)
+#define TXCR_FTXQ (1 << 4)
+#define TXCR_TXFCE (1 << 3)
+#define TXCR_TXPE (1 << 2)
+#define TXCR_TXCRC (1 << 1)
+#define TXCR_TXE (1 << 0)
+
+#define KS_TXSR 0x72
+#define TXSR_TXLC (1 << 13)
+#define TXSR_TXMC (1 << 12)
+#define TXSR_TXFID_MASK (0x3f << 0)
+#define TXSR_TXFID_SHIFT (0)
+#define TXSR_TXFID_GET(_v) (((_v) >> 0) & 0x3f)
+
+#define KS_RXCR1 0x74
+#define RXCR1_FRXQ (1 << 15)
+#define RXCR1_RXUDPFCC (1 << 14)
+#define RXCR1_RXTCPFCC (1 << 13)
+#define RXCR1_RXIPFCC (1 << 12)
+#define RXCR1_RXPAFMA (1 << 11)
+#define RXCR1_RXFCE (1 << 10)
+#define RXCR1_RXEFE (1 << 9)
+#define RXCR1_RXMAFMA (1 << 8)
+#define RXCR1_RXBE (1 << 7)
+#define RXCR1_RXME (1 << 6)
+#define RXCR1_RXUE (1 << 5)
+#define RXCR1_RXAE (1 << 4)
+#define RXCR1_RXINVF (1 << 1)
+#define RXCR1_RXE (1 << 0)
+
+#define KS_RXCR2 0x76
+#define RXCR2_SRDBL_MASK (0x7 << 5)
+#define RXCR2_SRDBL_SHIFT (5)
+#define RXCR2_SRDBL_4B (0x0 << 5)
+#define RXCR2_SRDBL_8B (0x1 << 5)
+#define RXCR2_SRDBL_16B (0x2 << 5)
+#define RXCR2_SRDBL_32B (0x3 << 5)
+#define RXCR2_SRDBL_FRAME (0x4 << 5)
+#define RXCR2_IUFFP (1 << 4)
+#define RXCR2_RXIUFCEZ (1 << 3)
+#define RXCR2_UDPLFE (1 << 2)
+#define RXCR2_RXICMPFCC (1 << 1)
+#define RXCR2_RXSAF (1 << 0)
+
+#define KS_TXMIR 0x78
+
+#define KS_RXFHSR 0x7C
+#define RXFSHR_RXFV (1 << 15)
+#define RXFSHR_RXICMPFCS (1 << 13)
+#define RXFSHR_RXIPFCS (1 << 12)
+#define RXFSHR_RXTCPFCS (1 << 11)
+#define RXFSHR_RXUDPFCS (1 << 10)
+#define RXFSHR_RXBF (1 << 7)
+#define RXFSHR_RXMF (1 << 6)
+#define RXFSHR_RXUF (1 << 5)
+#define RXFSHR_RXMR (1 << 4)
+#define RXFSHR_RXFT (1 << 3)
+#define RXFSHR_RXFTL (1 << 2)
+#define RXFSHR_RXRF (1 << 1)
+#define RXFSHR_RXCE (1 << 0)
+
+#define KS_RXFHBCR 0x7E
+#define KS_TXQCR 0x80
+#define TXQCR_AETFE (1 << 2)
+#define TXQCR_TXQMAM (1 << 1)
+#define TXQCR_METFE (1 << 0)
+
+#define KS_RXQCR 0x82
+#define RXQCR_RXDTTS (1 << 12)
+#define RXQCR_RXDBCTS (1 << 11)
+#define RXQCR_RXFCTS (1 << 10)
+#define RXQCR_RXIPHTOE (1 << 9)
+#define RXQCR_RXDTTE (1 << 7)
+#define RXQCR_RXDBCTE (1 << 6)
+#define RXQCR_RXFCTE (1 << 5)
+#define RXQCR_ADRFE (1 << 4)
+#define RXQCR_SDA (1 << 3)
+#define RXQCR_RRXEF (1 << 0)
+
+#define KS_TXFDPR 0x84
+#define TXFDPR_TXFPAI (1 << 14)
+#define TXFDPR_TXFP_MASK (0x7ff << 0)
+#define TXFDPR_TXFP_SHIFT (0)
+
+#define KS_RXFDPR 0x86
+#define RXFDPR_RXFPAI (1 << 14)
+
+#define KS_RXDTTR 0x8C
+#define KS_RXDBCTR 0x8E
+
+#define KS_IER 0x90
+#define KS_ISR 0x92
+#define IRQ_LCI (1 << 15)
+#define IRQ_TXI (1 << 14)
+#define IRQ_RXI (1 << 13)
+#define IRQ_RXOI (1 << 11)
+#define IRQ_TXPSI (1 << 9)
+#define IRQ_RXPSI (1 << 8)
+#define IRQ_TXSAI (1 << 6)
+#define IRQ_RXWFDI (1 << 5)
+#define IRQ_RXMPDI (1 << 4)
+#define IRQ_LDI (1 << 3)
+#define IRQ_EDI (1 << 2)
+#define IRQ_SPIBEI (1 << 1)
+#define IRQ_DEDI (1 << 0)
+
+#define KS_RXFCTR 0x9C
+#define KS_RXFC 0x9D
+#define RXFCTR_RXFC_MASK (0xff << 8)
+#define RXFCTR_RXFC_SHIFT (8)
+#define RXFCTR_RXFC_GET(_v) (((_v) >> 8) & 0xff)
+#define RXFCTR_RXFCT_MASK (0xff << 0)
+#define RXFCTR_RXFCT_SHIFT (0)
+
+#define KS_TXNTFSR 0x9E
+
+#define KS_MAHTR0 0xA0
+#define KS_MAHTR1 0xA2
+#define KS_MAHTR2 0xA4
+#define KS_MAHTR3 0xA6
+
+#define KS_FCLWR 0xB0
+#define KS_FCHWR 0xB2
+#define KS_FCOWR 0xB4
+
+#define KS_CIDER 0xC0
+#define CIDER_ID 0x8870
+#define CIDER_REV_MASK (0x7 << 1)
+#define CIDER_REV_SHIFT (1)
+#define CIDER_REV_GET(_v) (((_v) >> 1) & 0x7)
+
+#define KS_CGCR 0xC6
+
+#define KS_IACR 0xC8
+#define IACR_RDEN (1 << 12)
+#define IACR_TSEL_MASK (0x3 << 10)
+#define IACR_TSEL_SHIFT (10)
+#define IACR_TSEL_MIB (0x3 << 10)
+#define IACR_ADDR_MASK (0x1f << 0)
+#define IACR_ADDR_SHIFT (0)
+
+#define KS_IADLR 0xD0
+#define KS_IAHDR 0xD2
+
+#define KS_PMECR 0xD4
+#define PMECR_PME_DELAY (1 << 14)
+#define PMECR_PME_POL (1 << 12)
+#define PMECR_WOL_WAKEUP (1 << 11)
+#define PMECR_WOL_MAGICPKT (1 << 10)
+#define PMECR_WOL_LINKUP (1 << 9)
+#define PMECR_WOL_ENERGY (1 << 8)
+#define PMECR_AUTO_WAKE_EN (1 << 7)
+#define PMECR_WAKEUP_NORMAL (1 << 6)
+#define PMECR_WKEVT_MASK (0xf << 2)
+#define PMECR_WKEVT_SHIFT (2)
+#define PMECR_WKEVT_GET(_v) (((_v) >> 2) & 0xf)
+#define PMECR_WKEVT_ENERGY (0x1 << 2)
+#define PMECR_WKEVT_LINK (0x2 << 2)
+#define PMECR_WKEVT_MAGICPKT (0x4 << 2)
+#define PMECR_WKEVT_FRAME (0x8 << 2)
+#define PMECR_PM_MASK (0x3 << 0)
+#define PMECR_PM_SHIFT (0)
+#define PMECR_PM_NORMAL (0x0 << 0)
+#define PMECR_PM_ENERGY (0x1 << 0)
+#define PMECR_PM_SOFTDOWN (0x2 << 0)
+#define PMECR_PM_POWERSAVE (0x3 << 0)
+
+/* Standard MII PHY data */
+#define KS_P1MBCR 0xE4
+#define KS_P1MBSR 0xE6
+#define KS_PHY1ILR 0xE8
+#define KS_PHY1IHR 0xEA
+#define KS_P1ANAR 0xEC
+#define KS_P1ANLPR 0xEE
+
+#define KS_P1SCLMD 0xF4
+#define P1SCLMD_LEDOFF (1 << 15)
+#define P1SCLMD_TXIDS (1 << 14)
+#define P1SCLMD_RESTARTAN (1 << 13)
+#define P1SCLMD_DISAUTOMDIX (1 << 10)
+#define P1SCLMD_FORCEMDIX (1 << 9)
+#define P1SCLMD_AUTONEGEN (1 << 7)
+#define P1SCLMD_FORCE100 (1 << 6)
+#define P1SCLMD_FORCEFDX (1 << 5)
+#define P1SCLMD_ADV_FLOW (1 << 4)
+#define P1SCLMD_ADV_100BT_FDX (1 << 3)
+#define P1SCLMD_ADV_100BT_HDX (1 << 2)
+#define P1SCLMD_ADV_10BT_FDX (1 << 1)
+#define P1SCLMD_ADV_10BT_HDX (1 << 0)
+
+#define KS_P1CR 0xF6
+#define P1CR_HP_MDIX (1 << 15)
+#define P1CR_REV_POL (1 << 13)
+#define P1CR_OP_100M (1 << 10)
+#define P1CR_OP_FDX (1 << 9)
+#define P1CR_OP_MDI (1 << 7)
+#define P1CR_AN_DONE (1 << 6)
+#define P1CR_LINK_GOOD (1 << 5)
+#define P1CR_PNTR_FLOW (1 << 4)
+#define P1CR_PNTR_100BT_FDX (1 << 3)
+#define P1CR_PNTR_100BT_HDX (1 << 2)
+#define P1CR_PNTR_10BT_FDX (1 << 1)
+#define P1CR_PNTR_10BT_HDX (1 << 0)
+
+/* TX Frame control */
+
+#define TXFR_TXIC (1 << 15)
+#define TXFR_TXFID_MASK (0x3f << 0)
+#define TXFR_TXFID_SHIFT (0)
+
+/* SPI frame opcodes */
+#define KS_SPIOP_RD (0x00)
+#define KS_SPIOP_WR (0x40)
+#define KS_SPIOP_RXFIFO (0x80)
+#define KS_SPIOP_TXFIFO (0xC0)
dma_addr_t mapping;
unsigned int len, entry;
u32 ctrl;
+ unsigned long flags;
#ifdef DEBUG
int i;
#endif
len = skb->len;
- spin_lock_irq(&bp->lock);
+ spin_lock_irqsave(&bp->lock, flags);
/* This is a hard error, log it. */
if (TX_BUFFS_AVAIL(bp) < 1) {
netif_stop_queue(dev);
- spin_unlock_irq(&bp->lock);
+ spin_unlock_irqrestore(&bp->lock, flags);
dev_err(&bp->pdev->dev,
"BUG! Tx Ring full when queue awake!\n");
dev_dbg(&bp->pdev->dev, "tx_head = %u, tx_tail = %u\n",
if (TX_BUFFS_AVAIL(bp) < 1)
netif_stop_queue(dev);
- spin_unlock_irq(&bp->lock);
+ spin_unlock_irqrestore(&bp->lock, flags);
dev->trans_start = jiffies;
.ndo_set_mac_address = eth_mac_addr,
};
-static int __init macsonic_init(struct net_device *dev)
+static int __devinit macsonic_init(struct net_device *dev)
{
struct sonic_local* lp = netdev_priv(dev);
return 0;
}
-static int __init mac_onboard_sonic_ethernet_addr(struct net_device *dev)
+static int __devinit mac_onboard_sonic_ethernet_addr(struct net_device *dev)
{
struct sonic_local *lp = netdev_priv(dev);
const int prom_addr = ONBOARD_SONIC_PROM_BASE;
} else return 0;
}
-static int __init mac_onboard_sonic_probe(struct net_device *dev)
+static int __devinit mac_onboard_sonic_probe(struct net_device *dev)
{
/* Bwahahaha */
static int once_is_more_than_enough;
return macsonic_init(dev);
}
-static int __init mac_nubus_sonic_ethernet_addr(struct net_device *dev,
+static int __devinit mac_nubus_sonic_ethernet_addr(struct net_device *dev,
unsigned long prom_addr,
int id)
{
return 0;
}
-static int __init macsonic_ident(struct nubus_dev *ndev)
+static int __devinit macsonic_ident(struct nubus_dev *ndev)
{
if (ndev->dr_hw == NUBUS_DRHW_ASANTE_LC &&
ndev->dr_sw == NUBUS_DRSW_SONIC_LC)
return -1;
}
-static int __init mac_nubus_sonic_probe(struct net_device *dev)
+static int __devinit mac_nubus_sonic_probe(struct net_device *dev)
{
static int slots;
struct nubus_dev* ndev = NULL;
return macsonic_init(dev);
}
-static int __init mac_sonic_probe(struct platform_device *pdev)
+static int __devinit mac_sonic_probe(struct platform_device *pdev)
{
struct net_device *dev;
struct sonic_local *lp;
lp = netdev_priv(dev);
lp->device = &pdev->dev;
SET_NETDEV_DEV(dev, &pdev->dev);
+ platform_set_drvdata(pdev, dev);
/* This will catch fatal stuff like -ENOMEM as well as success */
err = mac_onboard_sonic_probe(dev);
/* Bad management packet (silently discarded): */
CMD_STAT_BAD_PKT = 0x30,
/* More outstanding CQEs in CQ than new CQ size: */
- CMD_STAT_BAD_SIZE = 0x40
+ CMD_STAT_BAD_SIZE = 0x40,
+ /* Multi Function device support required: */
+ CMD_STAT_MULTI_FUNC_REQ = 0x50,
};
enum {
[CMD_STAT_LAM_NOT_PRE] = -EAGAIN,
[CMD_STAT_BAD_PKT] = -EINVAL,
[CMD_STAT_BAD_SIZE] = -ENOMEM,
+ [CMD_STAT_MULTI_FUNC_REQ] = -EACCES,
};
if (status >= ARRAY_SIZE(trans_table) ||
* SOFTWARE.
*/
-#include <linux/init.h>
#include <linux/hardirq.h>
#include <linux/mlx4/cmd.h>
{
cmd->autoneg = AUTONEG_DISABLE;
cmd->supported = SUPPORTED_10000baseT_Full;
- cmd->advertising = SUPPORTED_10000baseT_Full;
+ cmd->advertising = ADVERTISED_1000baseT_Full;
if (netif_carrier_ok(dev)) {
cmd->speed = SPEED_10000;
cmd->duplex = DUPLEX_FULL;
PCI_DMA_FROMDEVICE);
}
/* Adjust size of last fragment to match actual length */
- skb_frags_rx[nr - 1].size = length -
- priv->frag_info[nr - 1].frag_prefix_size;
+ if (nr > 0)
+ skb_frags_rx[nr - 1].size = length -
+ priv->frag_info[nr - 1].frag_prefix_size;
return nr;
fail:
pci_unmap_page(mdev->pdev,
(dma_addr_t) be64_to_cpu(data->addr),
frag->size, PCI_DMA_TODEVICE);
+ ++data;
}
}
/* Stamp the freed descriptor */
{
struct mlx4_en_cq *cq = &priv->tx_cq[tx_ind];
struct mlx4_en_tx_ring *ring = &priv->tx_ring[tx_ind];
+ unsigned long flags;
/* If we don't have a pending timer, set one up to catch our recent
post in case the interface becomes idle */
/* Poll the CQ every mlx4_en_TX_MODER_POLL packets */
if ((++ring->poll_cnt & (MLX4_EN_TX_POLL_MODER - 1)) == 0)
- if (spin_trylock_irq(&ring->comp_lock)) {
+ if (spin_trylock_irqsave(&ring->comp_lock, flags)) {
mlx4_en_process_tx_cq(priv->dev, cq);
- spin_unlock_irq(&ring->comp_lock);
+ spin_unlock_irqrestore(&ring->comp_lock, flags);
}
}
* SOFTWARE.
*/
-#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/mm.h>
#include <linux/dma-mapping.h>
#include "mlx4.h"
#include "fw.h"
+enum {
+ MLX4_IRQNAME_SIZE = 64
+};
+
enum {
MLX4_NUM_ASYNC_EQE = 0x100,
MLX4_NUM_SPARE_EQE = 0x80,
iounmap(priv->clr_base);
}
-int mlx4_map_eq_icm(struct mlx4_dev *dev, u64 icm_virt)
-{
- struct mlx4_priv *priv = mlx4_priv(dev);
- int ret;
-
- /*
- * We assume that mapping one page is enough for the whole EQ
- * context table. This is fine with all current HCAs, because
- * we only use 32 EQs and each EQ uses 64 bytes of context
- * memory, or 1 KB total.
- */
- priv->eq_table.icm_virt = icm_virt;
- priv->eq_table.icm_page = alloc_page(GFP_HIGHUSER);
- if (!priv->eq_table.icm_page)
- return -ENOMEM;
- priv->eq_table.icm_dma = pci_map_page(dev->pdev, priv->eq_table.icm_page, 0,
- PAGE_SIZE, PCI_DMA_BIDIRECTIONAL);
- if (pci_dma_mapping_error(dev->pdev, priv->eq_table.icm_dma)) {
- __free_page(priv->eq_table.icm_page);
- return -ENOMEM;
- }
-
- ret = mlx4_MAP_ICM_page(dev, priv->eq_table.icm_dma, icm_virt);
- if (ret) {
- pci_unmap_page(dev->pdev, priv->eq_table.icm_dma, PAGE_SIZE,
- PCI_DMA_BIDIRECTIONAL);
- __free_page(priv->eq_table.icm_page);
- }
-
- return ret;
-}
-
-void mlx4_unmap_eq_icm(struct mlx4_dev *dev)
-{
- struct mlx4_priv *priv = mlx4_priv(dev);
-
- mlx4_UNMAP_ICM(dev, priv->eq_table.icm_virt, 1);
- pci_unmap_page(dev->pdev, priv->eq_table.icm_dma, PAGE_SIZE,
- PCI_DMA_BIDIRECTIONAL);
- __free_page(priv->eq_table.icm_page);
-}
-
int mlx4_alloc_eq_table(struct mlx4_dev *dev)
{
struct mlx4_priv *priv = mlx4_priv(dev);
priv->eq_table.clr_int = priv->clr_base +
(priv->eq_table.inta_pin < 32 ? 4 : 0);
- priv->eq_table.irq_names = kmalloc(16 * dev->caps.num_comp_vectors, GFP_KERNEL);
+ priv->eq_table.irq_names =
+ kmalloc(MLX4_IRQNAME_SIZE * (dev->caps.num_comp_vectors + 1),
+ GFP_KERNEL);
if (!priv->eq_table.irq_names) {
err = -ENOMEM;
goto err_out_bitmap;
goto err_out_comp;
if (dev->flags & MLX4_FLAG_MSI_X) {
- static const char async_eq_name[] = "mlx4-async";
const char *eq_name;
for (i = 0; i < dev->caps.num_comp_vectors + 1; ++i) {
if (i < dev->caps.num_comp_vectors) {
- snprintf(priv->eq_table.irq_names + i * 16, 16,
- "mlx4-comp-%d", i);
- eq_name = priv->eq_table.irq_names + i * 16;
- } else
- eq_name = async_eq_name;
+ snprintf(priv->eq_table.irq_names +
+ i * MLX4_IRQNAME_SIZE,
+ MLX4_IRQNAME_SIZE,
+ "mlx4-comp-%d@pci:%s", i,
+ pci_name(dev->pdev));
+ } else {
+ snprintf(priv->eq_table.irq_names +
+ i * MLX4_IRQNAME_SIZE,
+ MLX4_IRQNAME_SIZE,
+ "mlx4-async@pci:%s",
+ pci_name(dev->pdev));
+ }
+ eq_name = priv->eq_table.irq_names +
+ i * MLX4_IRQNAME_SIZE;
err = request_irq(priv->eq_table.eq[i].irq,
mlx4_msi_x_interrupt, 0, eq_name,
priv->eq_table.eq + i);
priv->eq_table.eq[i].have_irq = 1;
}
} else {
+ snprintf(priv->eq_table.irq_names,
+ MLX4_IRQNAME_SIZE,
+ DRV_NAME "@pci:%s",
+ pci_name(dev->pdev));
err = request_irq(dev->pdev->irq, mlx4_interrupt,
- IRQF_SHARED, DRV_NAME, dev);
+ IRQF_SHARED, priv->eq_table.irq_names, dev);
if (err)
goto err_out_async;
* SOFTWARE.
*/
-#include <linux/init.h>
#include <linux/errno.h>
#include <linux/mm.h>
#include <linux/scatterlist.h>
goto err_unmap_aux;
}
- err = mlx4_map_eq_icm(dev, init_hca->eqc_base);
+ err = mlx4_init_icm_table(dev, &priv->eq_table.table,
+ init_hca->eqc_base, dev_cap->eqc_entry_sz,
+ dev->caps.num_eqs, dev->caps.num_eqs,
+ 0, 0);
if (err) {
mlx4_err(dev, "Failed to map EQ context memory, aborting.\n");
goto err_unmap_cmpt;
mlx4_cleanup_icm_table(dev, &priv->mr_table.mtt_table);
err_unmap_eq:
- mlx4_unmap_eq_icm(dev);
+ mlx4_cleanup_icm_table(dev, &priv->eq_table.table);
err_unmap_cmpt:
mlx4_cleanup_icm_table(dev, &priv->eq_table.cmpt_table);
mlx4_cleanup_icm_table(dev, &priv->qp_table.qp_table);
mlx4_cleanup_icm_table(dev, &priv->mr_table.dmpt_table);
mlx4_cleanup_icm_table(dev, &priv->mr_table.mtt_table);
+ mlx4_cleanup_icm_table(dev, &priv->eq_table.table);
mlx4_cleanup_icm_table(dev, &priv->eq_table.cmpt_table);
mlx4_cleanup_icm_table(dev, &priv->cq_table.cmpt_table);
mlx4_cleanup_icm_table(dev, &priv->srq_table.cmpt_table);
mlx4_cleanup_icm_table(dev, &priv->qp_table.cmpt_table);
- mlx4_unmap_eq_icm(dev);
mlx4_UNMAP_ICM_AUX(dev);
mlx4_free_icm(dev, priv->fw.aux_icm, 0);
err = mlx4_QUERY_FW(dev);
if (err) {
- mlx4_err(dev, "QUERY_FW command failed, aborting.\n");
+ if (err == -EACCES)
+ mlx4_info(dev, "non-primary physical function, skipping.\n");
+ else
+ mlx4_err(dev, "QUERY_FW command failed, aborting.\n");
return err;
}
return 0;
err_close:
- mlx4_close_hca(dev);
+ mlx4_CLOSE_HCA(dev, 0);
err_free_icm:
mlx4_free_icms(dev);
goto err_disable_pdev;
}
- err = pci_request_region(pdev, 0, DRV_NAME);
+ err = pci_request_regions(pdev, DRV_NAME);
if (err) {
- dev_err(&pdev->dev, "Cannot request control region, aborting.\n");
+ dev_err(&pdev->dev, "Couldn't get PCI resources, aborting\n");
goto err_disable_pdev;
}
- err = pci_request_region(pdev, 2, DRV_NAME);
- if (err) {
- dev_err(&pdev->dev, "Cannot request UAR region, aborting.\n");
- goto err_release_bar0;
- }
-
pci_set_master(pdev);
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (err) {
dev_err(&pdev->dev, "Can't set PCI DMA mask, aborting.\n");
- goto err_release_bar2;
+ goto err_release_regions;
}
}
err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
if (err) {
dev_err(&pdev->dev, "Can't set consistent PCI DMA mask, "
"aborting.\n");
- goto err_release_bar2;
+ goto err_release_regions;
}
}
dev_err(&pdev->dev, "Device struct alloc failed, "
"aborting.\n");
err = -ENOMEM;
- goto err_release_bar2;
+ goto err_release_regions;
}
dev = &priv->dev;
err_free_dev:
kfree(priv);
-err_release_bar2:
- pci_release_region(pdev, 2);
-
-err_release_bar0:
- pci_release_region(pdev, 0);
+err_release_regions:
+ pci_release_regions(pdev);
err_disable_pdev:
pci_disable_device(pdev);
pci_disable_msix(pdev);
kfree(priv);
- pci_release_region(pdev, 2);
- pci_release_region(pdev, 0);
+ pci_release_regions(pdev);
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
}
{ PCI_VDEVICE(MELLANOX, 0x6750) }, /* MT25408 "Hermon" EN 10GigE PCIe gen2 */
{ PCI_VDEVICE(MELLANOX, 0x6372) }, /* MT25458 ConnectX EN 10GBASE-T 10GigE */
{ PCI_VDEVICE(MELLANOX, 0x675a) }, /* MT25458 ConnectX EN 10GBASE-T+Gen2 10GigE */
+ { PCI_VDEVICE(MELLANOX, 0x6764) }, /* MT26468 ConnectX EN 10GigE PCIe gen2*/
{ 0, }
};
* SOFTWARE.
*/
-#include <linux/init.h>
#include <linux/string.h>
#include <linux/slab.h>
void __iomem **uar_map;
u32 clr_mask;
struct mlx4_eq *eq;
- u64 icm_virt;
- struct page *icm_page;
- dma_addr_t icm_dma;
+ struct mlx4_icm_table table;
struct mlx4_icm_table cmpt_table;
int have_irq;
u8 inta_pin;
struct mlx4_dev_cap *dev_cap,
struct mlx4_init_hca_param *init_hca);
-int mlx4_map_eq_icm(struct mlx4_dev *dev, u64 icm_virt);
-void mlx4_unmap_eq_icm(struct mlx4_dev *dev);
-
int mlx4_cmd_init(struct mlx4_dev *dev);
void mlx4_cmd_cleanup(struct mlx4_dev *dev);
void mlx4_cmd_event(struct mlx4_dev *dev, u16 token, u8 status, u64 out_param);
* SOFTWARE.
*/
-#include <linux/init.h>
#include <linux/errno.h>
#include <linux/mlx4/cmd.h>
* SOFTWARE.
*/
-#include <linux/init.h>
#include <linux/errno.h>
#include <asm/page.h>
* SOFTWARE.
*/
-#include <linux/init.h>
-
#include "mlx4.h"
#include "fw.h"
* SOFTWARE.
*/
-#include <linux/init.h>
-
#include <linux/mlx4/cmd.h>
#include <linux/mlx4/qp.h>
* SOFTWARE.
*/
-#include <linux/init.h>
#include <linux/errno.h>
#include <linux/pci.h>
#include <linux/delay.h>
* SOFTWARE.
*/
-#include <linux/init.h>
-
#include <linux/mlx4/cmd.h>
#include "mlx4.h"
#define NETXEN_CTX_SIGNATURE 0xdee0
#define NETXEN_CTX_SIGNATURE_V2 0x0002dee0
#define NETXEN_CTX_RESET 0xbad0
+#define NETXEN_CTX_D3_RESET 0xacc0
#define NETXEN_RCV_PRODUCER(ringid) (ringid)
#define PHAN_PEG_RCV_INITIALIZED 0xff01
u32 crb_cmd_consumer;
u32 num_desc;
+ struct netdev_queue *txq;
+
struct netxen_cmd_buffer *cmd_buf_arr;
struct cmd_desc_type0 *desc_head;
dma_addr_t phys_addr;
u8 mc_enabled;
u8 max_mc_count;
u8 rss_supported;
- u8 resv2;
+ u8 link_changed;
u32 resv3;
u8 has_link_events;
goto err_out_free;
} else {
err = netxen_init_old_ctx(adapter);
- if (err) {
- netxen_free_hw_resources(adapter);
- return err;
- }
+ if (err)
+ goto err_out_free;
}
return 0;
int port = adapter->portnum;
if (adapter->fw_major >= 4) {
- nx_fw_cmd_destroy_tx_ctx(adapter);
nx_fw_cmd_destroy_rx_ctx(adapter);
+ nx_fw_cmd_destroy_tx_ctx(adapter);
} else {
netxen_api_lock(adapter);
NXWR32(adapter, CRB_CTX_SIGNATURE_REG(port),
- NETXEN_CTX_RESET | port);
+ NETXEN_CTX_D3_RESET | port);
netxen_api_unlock(adapter);
}
+ /* Allow dma queues to drain after context reset */
+ msleep(20);
+
recv_ctx = &adapter->recv_ctx;
if (recv_ctx->hwctx != NULL) {
i = 0;
tx_ring = adapter->tx_ring;
- netif_tx_lock_bh(adapter->netdev);
+ __netif_tx_lock_bh(tx_ring->txq);
producer = tx_ring->producer;
consumer = tx_ring->sw_consumer;
- if (nr_desc >= find_diff_among(producer, consumer, tx_ring->num_desc)) {
- netif_tx_unlock_bh(adapter->netdev);
+ if (nr_desc >= netxen_tx_avail(tx_ring)) {
+ netif_tx_stop_queue(tx_ring->txq);
+ __netif_tx_unlock_bh(tx_ring->txq);
return -EBUSY;
}
netxen_nic_update_cmd_producer(adapter, tx_ring);
- netif_tx_unlock_bh(adapter->netdev);
+ __netif_tx_unlock_bh(tx_ring->txq);
return 0;
}
adapter->tx_ring = tx_ring;
tx_ring->num_desc = adapter->num_txd;
+ tx_ring->txq = netdev_get_tx_queue(netdev, 0);
cmd_buf_arr = vmalloc(TX_BUFF_RINGSIZE(tx_ring));
if (cmd_buf_arr == NULL) {
smp_mb();
if (netif_queue_stopped(netdev) && netif_carrier_ok(netdev)) {
- netif_tx_lock(netdev);
+ __netif_tx_lock(tx_ring->txq, smp_processor_id());
if (netxen_tx_avail(tx_ring) > TX_STOP_THRESH)
netif_wake_queue(netdev);
- netif_tx_unlock(netdev);
+ __netif_tx_unlock(tx_ring->txq);
}
}
/*
MODULE_DEVICE_TABLE(pci, netxen_pci_tbl);
-static struct workqueue_struct *netxen_workq;
-#define SCHEDULE_WORK(tp) queue_work(netxen_workq, tp)
-#define FLUSH_SCHEDULED_WORK() flush_workqueue(netxen_workq)
-
static void netxen_watchdog(unsigned long);
static uint32_t crb_cmd_producer[4] = {
{
if (recv_ctx->sds_rings != NULL)
kfree(recv_ctx->sds_rings);
+
+ recv_ctx->sds_rings = NULL;
}
static int
return 0;
}
+static void
+netxen_napi_del(struct netxen_adapter *adapter)
+{
+ int ring;
+ struct nx_host_sds_ring *sds_ring;
+ struct netxen_recv_context *recv_ctx = &adapter->recv_ctx;
+
+ for (ring = 0; ring < adapter->max_sds_rings; ring++) {
+ sds_ring = &recv_ctx->sds_rings[ring];
+ netif_napi_del(&sds_ring->napi);
+ }
+
+ netxen_free_sds_rings(&adapter->recv_ctx);
+}
+
static void
netxen_napi_enable(struct netxen_adapter *adapter)
{
for (ring = 0; ring < adapter->max_sds_rings; ring++) {
sds_ring = &recv_ctx->sds_rings[ring];
- napi_disable(&sds_ring->napi);
netxen_nic_disable_int(sds_ring);
- synchronize_irq(sds_ring->irq);
+ napi_synchronize(&sds_ring->napi);
+ napi_disable(&sds_ring->napi);
}
}
-static int nx_set_dma_mask(struct netxen_adapter *adapter, uint8_t revision_id)
+static int nx_set_dma_mask(struct netxen_adapter *adapter)
{
struct pci_dev *pdev = adapter->pdev;
uint64_t mask, cmask;
adapter->pci_using_dac = 0;
mask = DMA_BIT_MASK(32);
- /*
- * Consistent DMA mask is set to 32 bit because it cannot be set to
- * 35 bits. For P3 also leave it at 32 bits for now. Only the rings
- * come off this pool.
- */
cmask = DMA_BIT_MASK(32);
+ if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
#ifndef CONFIG_IA64
- if (revision_id >= NX_P3_B0)
- mask = DMA_BIT_MASK(39);
- else if (revision_id == NX_P2_C1)
mask = DMA_BIT_MASK(35);
#endif
+ } else {
+ mask = DMA_BIT_MASK(39);
+ cmask = mask;
+ }
+
if (pci_set_dma_mask(pdev, mask) == 0 &&
pci_set_consistent_dma_mask(pdev, cmask) == 0) {
adapter->pci_using_dac = 1;
nx_update_dma_mask(struct netxen_adapter *adapter)
{
int change, shift, err;
- uint64_t mask, old_mask;
+ uint64_t mask, old_mask, old_cmask;
struct pci_dev *pdev = adapter->pdev;
change = 0;
shift = NXRD32(adapter, CRB_DMA_SHIFT);
- if (shift >= 32)
+ if (shift > 32)
return 0;
if (NX_IS_REVISION_P3(adapter->ahw.revision_id) && (shift > 9))
if (change) {
old_mask = pdev->dma_mask;
- mask = (1ULL<<(32+shift)) - 1;
+ old_cmask = pdev->dev.coherent_dma_mask;
+
+ mask = DMA_BIT_MASK(32+shift);
err = pci_set_dma_mask(pdev, mask);
if (err)
- return pci_set_dma_mask(pdev, old_mask);
+ goto err_out;
+
+ if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
+
+ err = pci_set_consistent_dma_mask(pdev, mask);
+ if (err)
+ goto err_out;
+ }
+ dev_info(&pdev->dev, "using %d-bit dma mask\n", 32+shift);
}
return 0;
+
+err_out:
+ pci_set_dma_mask(pdev, old_mask);
+ pci_set_consistent_dma_mask(pdev, old_cmask);
+ return err;
}
static void netxen_check_options(struct netxen_adapter *adapter)
adapter->ahw.linkup = 0;
- netxen_napi_enable(adapter);
-
if (adapter->max_sds_rings > 1)
netxen_config_rss(adapter, 1);
+ netxen_napi_enable(adapter);
+
if (adapter->capabilities & NX_FW_CAPABILITY_LINK_NOTIFICATION)
netxen_linkevent_request(adapter, 1);
else
static void
netxen_nic_down(struct netxen_adapter *adapter, struct net_device *netdev)
{
+ spin_lock(&adapter->tx_clean_lock);
netif_carrier_off(netdev);
- netif_stop_queue(netdev);
+ netif_tx_disable(netdev);
if (adapter->stop_port)
adapter->stop_port(adapter);
netxen_napi_disable(adapter);
netxen_release_tx_buffers(adapter);
+ spin_unlock(&adapter->tx_clean_lock);
- FLUSH_SCHEDULED_WORK();
del_timer_sync(&adapter->watchdog_timer);
}
struct nx_host_tx_ring *tx_ring;
err = netxen_init_firmware(adapter);
- if (err != 0) {
- printk(KERN_ERR "Failed to init firmware\n");
- return -EIO;
- }
+ if (err)
+ return err;
+
+ err = netxen_napi_add(adapter, netdev);
+ if (err)
+ return err;
if (adapter->fw_major < 4)
adapter->max_rds_rings = 3;
static void
netxen_nic_detach(struct netxen_adapter *adapter)
{
- netxen_release_rx_buffers(adapter);
netxen_free_hw_resources(adapter);
+ netxen_release_rx_buffers(adapter);
netxen_nic_free_irq(adapter);
+ netxen_napi_del(adapter);
netxen_free_sw_resources(adapter);
adapter->is_up = 0;
revision_id = pdev->revision;
adapter->ahw.revision_id = revision_id;
- err = nx_set_dma_mask(adapter, revision_id);
+ err = nx_set_dma_mask(adapter);
if (err)
goto err_out_free_netdev;
netdev->irq = adapter->msix_entries[0].vector;
- if (netxen_napi_add(adapter, netdev))
- goto err_out_disable_msi;
-
init_timer(&adapter->watchdog_timer);
adapter->watchdog_timer.function = &netxen_watchdog;
adapter->watchdog_timer.data = (unsigned long)adapter;
unregister_netdev(netdev);
+ cancel_work_sync(&adapter->watchdog_task);
+ cancel_work_sync(&adapter->tx_timeout_task);
+
if (adapter->is_up == NETXEN_ADAPTER_UP_MAGIC) {
netxen_nic_detach(adapter);
}
netxen_free_adapter_offload(adapter);
netxen_teardown_intr(adapter);
- netxen_free_sds_rings(&adapter->recv_ctx);
netxen_cleanup_pci_map(adapter);
if (netif_running(netdev))
netxen_nic_down(adapter, netdev);
+ cancel_work_sync(&adapter->watchdog_task);
+ cancel_work_sync(&adapter->tx_timeout_task);
+
if (adapter->is_up == NETXEN_ADAPTER_UP_MAGIC)
netxen_nic_detach(adapter);
printk(KERN_ALERT
"%s: Device temperature %d degrees C exceeds"
" maximum allowed. Hardware has been shut down.\n",
- netxen_nic_driver_name, temp_val);
-
- netif_carrier_off(netdev);
- netif_stop_queue(netdev);
+ netdev->name, temp_val);
rv = 1;
} else if (temp_state == NX_TEMP_WARN) {
if (adapter->temp == NX_TEMP_NORMAL) {
"%s: Device temperature %d degrees C "
"exceeds operating range."
" Immediate action needed.\n",
- netxen_nic_driver_name, temp_val);
+ netdev->name, temp_val);
}
} else {
if (adapter->temp == NX_TEMP_WARN) {
printk(KERN_INFO
"%s: Device temperature is now %d degrees C"
- " in normal range.\n", netxen_nic_driver_name,
+ " in normal range.\n", netdev->name,
temp_val);
}
}
netif_carrier_off(netdev);
netif_stop_queue(netdev);
}
-
- if (!adapter->has_link_events)
- netxen_nic_set_link_parameters(adapter);
-
+ adapter->link_changed = !adapter->has_link_events;
} else if (!adapter->ahw.linkup && linkup) {
printk(KERN_INFO "%s: %s NIC Link is up\n",
netxen_nic_driver_name, netdev->name);
netif_carrier_on(netdev);
netif_wake_queue(netdev);
}
-
- if (!adapter->has_link_events)
- netxen_nic_set_link_parameters(adapter);
+ adapter->link_changed = !adapter->has_link_events;
}
}
netxen_advert_link_change(adapter, linkup);
}
+static void netxen_nic_thermal_shutdown(struct netxen_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+
+ netif_device_detach(netdev);
+ netxen_nic_down(adapter, netdev);
+ netxen_nic_detach(adapter);
+}
+
static void netxen_watchdog(unsigned long v)
{
struct netxen_adapter *adapter = (struct netxen_adapter *)v;
- SCHEDULE_WORK(&adapter->watchdog_task);
+ if (netxen_nic_check_temp(adapter))
+ goto do_sched;
+
+ if (!adapter->has_link_events) {
+ netxen_nic_handle_phy_intr(adapter);
+
+ if (adapter->link_changed)
+ goto do_sched;
+ }
+
+ if (netif_running(adapter->netdev))
+ mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
+
+ return;
+
+do_sched:
+ schedule_work(&adapter->watchdog_task);
}
void netxen_watchdog_task(struct work_struct *work)
struct netxen_adapter *adapter =
container_of(work, struct netxen_adapter, watchdog_task);
- if ((adapter->portnum == 0) && netxen_nic_check_temp(adapter))
+ if (adapter->temp == NX_TEMP_PANIC) {
+ netxen_nic_thermal_shutdown(adapter);
return;
+ }
- if (!adapter->has_link_events)
- netxen_nic_handle_phy_intr(adapter);
+ if (adapter->link_changed)
+ netxen_nic_set_link_parameters(adapter);
if (netif_running(adapter->netdev))
mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
static void netxen_tx_timeout(struct net_device *netdev)
{
- struct netxen_adapter *adapter = (struct netxen_adapter *)
- netdev_priv(netdev);
- SCHEDULE_WORK(&adapter->tx_timeout_task);
+ struct netxen_adapter *adapter = netdev_priv(netdev);
+ schedule_work(&adapter->tx_timeout_task);
}
static void netxen_tx_timeout_task(struct work_struct *work)
struct netxen_adapter *adapter =
container_of(work, struct netxen_adapter, tx_timeout_task);
+ if (!netif_running(adapter->netdev))
+ return;
+
printk(KERN_ERR "%s %s: transmit timeout, resetting.\n",
netxen_nic_driver_name, adapter->netdev->name);
if ((work_done < budget) && tx_complete) {
napi_complete(&sds_ring->napi);
- netxen_nic_enable_int(sds_ring);
+ if (netif_running(adapter->netdev))
+ netxen_nic_enable_int(sds_ring);
}
return work_done;
{
printk(KERN_INFO "%s\n", netxen_nic_driver_string);
- if ((netxen_workq = create_singlethread_workqueue("netxen")) == NULL)
- return -ENOMEM;
-
return pci_register_driver(&netxen_driver);
}
static void __exit netxen_exit_module(void)
{
pci_unregister_driver(&netxen_driver);
- destroy_workqueue(netxen_workq);
}
module_exit(netxen_exit_module);
static int el3_rx(struct net_device *dev);
static int el3_close(struct net_device *dev);
static void el3_tx_timeout(struct net_device *dev);
+static void set_rx_mode(struct net_device *dev);
static void set_multicast_list(struct net_device *dev);
static const struct ethtool_ops netdev_ethtool_ops;
/* Switch to register set 1 for normal use. */
EL3WINDOW(1);
- /* Accept b-cast and phys addr only. */
- outw(SetRxFilter | RxStation | RxBroadcast, ioaddr + EL3_CMD);
+ set_rx_mode(dev);
outw(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */
outw(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */
outw(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */
if (fifo_diag & 0x2000) {
/* Rx underrun */
tc589_wait_for_completion(dev, RxReset);
- set_multicast_list(dev);
+ set_rx_mode(dev);
outw(RxEnable, ioaddr + EL3_CMD);
}
outw(AckIntr | AdapterFailure, ioaddr + EL3_CMD);
return 0;
}
-static void set_multicast_list(struct net_device *dev)
+static void set_rx_mode(struct net_device *dev)
{
- struct el3_private *lp = netdev_priv(dev);
- struct pcmcia_device *link = lp->p_dev;
unsigned int ioaddr = dev->base_addr;
u16 opts = SetRxFilter | RxStation | RxBroadcast;
- if (!pcmcia_dev_present(link)) return;
if (dev->flags & IFF_PROMISC)
opts |= RxMulticast | RxProm;
else if (dev->mc_count || (dev->flags & IFF_ALLMULTI))
outw(opts, ioaddr + EL3_CMD);
}
+static void set_multicast_list(struct net_device *dev)
+{
+ struct el3_private *priv = netdev_priv(dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ set_rx_mode(dev);
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
static int el3_close(struct net_device *dev)
{
struct el3_private *lp = netdev_priv(dev);
if (pcnet32_dwio_read_csr(ioaddr, 0) == 4
&& pcnet32_dwio_check(ioaddr)) {
a = &pcnet32_dwio;
- } else
+ } else {
+ if (pcnet32_debug & NETIF_MSG_PROBE)
+ printk(KERN_ERR PFX "No access methods\n");
goto err_release_region;
+ }
}
chip_version =
ret = -ENOMEM;
goto err_release_region;
}
- SET_NETDEV_DEV(dev, &pdev->dev);
+
+ if (pdev)
+ SET_NETDEV_DEV(dev, &pdev->dev);
if (pcnet32_debug & NETIF_MSG_PROBE)
printk(KERN_INFO PFX "%s at %#3lx,", chipname, ioaddr);
spin_lock_init(&lp->lock);
- SET_NETDEV_DEV(dev, &pdev->dev);
lp->name = chipname;
lp->shared_irq = shared;
lp->tx_ring_size = TX_RING_SIZE; /* default tx ring size */
lp->chip_version = chip_version;
lp->msg_enable = pcnet32_debug;
if ((cards_found >= MAX_UNITS)
- || (options[cards_found] > sizeof(options_mapping)))
+ || (options[cards_found] >= sizeof(options_mapping)))
lp->options = PCNET32_PORT_ASEL;
else
lp->options = options_mapping[options[cards_found]];
((cards_found >= MAX_UNITS) || full_duplex[cards_found]))
lp->options |= PCNET32_PORT_FD;
- if (!a) {
- if (pcnet32_debug & NETIF_MSG_PROBE)
- printk(KERN_ERR PFX "No access methods\n");
- ret = -ENODEV;
- goto err_free_consistent;
- }
lp->a = *a;
/* prior to register_netdev, dev->name is not yet correct */
return 0;
- err_free_ring:
+err_free_ring:
pcnet32_free_ring(dev);
- err_free_consistent:
pci_free_consistent(lp->pci_dev, sizeof(*lp->init_block),
lp->init_block, lp->init_dma_addr);
- err_free_netdev:
+err_free_netdev:
free_netdev(dev);
- err_release_region:
+err_release_region:
release_region(ioaddr, PCNET32_TOTAL_SIZE);
return ret;
}
static int pcnet32_open(struct net_device *dev)
{
struct pcnet32_private *lp = netdev_priv(dev);
+ struct pci_dev *pdev = lp->pci_dev;
unsigned long ioaddr = dev->base_addr;
u16 val;
int i;
lp->a.write_csr(ioaddr, 124, val);
/* Allied Telesyn AT 2700/2701 FX are 100Mbit only and do not negotiate */
- if (lp->pci_dev->subsystem_vendor == PCI_VENDOR_ID_AT &&
- (lp->pci_dev->subsystem_device == PCI_SUBDEVICE_ID_AT_2700FX ||
- lp->pci_dev->subsystem_device == PCI_SUBDEVICE_ID_AT_2701FX)) {
+ if (pdev && pdev->subsystem_vendor == PCI_VENDOR_ID_AT &&
+ (pdev->subsystem_device == PCI_SUBDEVICE_ID_AT_2700FX ||
+ pdev->subsystem_device == PCI_SUBDEVICE_ID_AT_2701FX)) {
if (lp->options & PCNET32_PORT_ASEL) {
lp->options = PCNET32_PORT_FD | PCNET32_PORT_100;
if (netif_msg_link(lp))
#ifdef CONFIG_OF_GPIO
#include <linux/of_gpio.h>
+#include <linux/of_mdio.h>
#include <linux/of_platform.h>
#endif
.get_mdio_data = mdio_get,
};
-static int __devinit mdio_gpio_bus_init(struct device *dev,
+static struct mii_bus * __devinit mdio_gpio_bus_init(struct device *dev,
struct mdio_gpio_platform_data *pdata,
int bus_id)
{
struct mii_bus *new_bus;
struct mdio_gpio_info *bitbang;
- int ret = -ENOMEM;
int i;
bitbang = kzalloc(sizeof(*bitbang), GFP_KERNEL);
new_bus->name = "GPIO Bitbanged MDIO",
- ret = -ENODEV;
-
new_bus->phy_mask = pdata->phy_mask;
new_bus->irq = pdata->irqs;
new_bus->parent = dev;
dev_set_drvdata(dev, new_bus);
- ret = mdiobus_register(new_bus);
- if (ret)
- goto out_free_all;
-
- return 0;
+ return new_bus;
-out_free_all:
- dev_set_drvdata(dev, NULL);
- gpio_free(bitbang->mdio);
out_free_mdc:
gpio_free(bitbang->mdc);
out_free_bus:
out_free_bitbang:
kfree(bitbang);
out:
- return ret;
+ return NULL;
}
-static void __devexit mdio_gpio_bus_destroy(struct device *dev)
+static void __devinit mdio_gpio_bus_deinit(struct device *dev)
{
struct mii_bus *bus = dev_get_drvdata(dev);
struct mdio_gpio_info *bitbang = bus->priv;
- mdiobus_unregister(bus);
- free_mdio_bitbang(bus);
dev_set_drvdata(dev, NULL);
- gpio_free(bitbang->mdc);
gpio_free(bitbang->mdio);
+ gpio_free(bitbang->mdc);
+ free_mdio_bitbang(bus);
kfree(bitbang);
}
+static void __devexit mdio_gpio_bus_destroy(struct device *dev)
+{
+ struct mii_bus *bus = dev_get_drvdata(dev);
+
+ mdiobus_unregister(bus);
+ mdio_gpio_bus_deinit(dev);
+}
+
static int __devinit mdio_gpio_probe(struct platform_device *pdev)
{
struct mdio_gpio_platform_data *pdata = pdev->dev.platform_data;
+ struct mii_bus *new_bus;
+ int ret;
if (!pdata)
return -ENODEV;
- return mdio_gpio_bus_init(&pdev->dev, pdata, pdev->id);
+ new_bus = mdio_gpio_bus_init(&pdev->dev, pdata, pdev->id);
+ if (!new_bus)
+ return -ENODEV;
+
+ ret = mdiobus_register(new_bus);
+ if (ret)
+ mdio_gpio_bus_deinit(&pdev->dev);
+
+ return ret;
}
static int __devexit mdio_gpio_remove(struct platform_device *pdev)
}
#ifdef CONFIG_OF_GPIO
-static void __devinit add_phy(struct mdio_gpio_platform_data *pdata,
- struct device_node *np)
-{
- const u32 *data;
- int len, id, irq;
-
- data = of_get_property(np, "reg", &len);
- if (!data || len != 4)
- return;
-
- id = *data;
- pdata->phy_mask &= ~(1 << id);
-
- irq = of_irq_to_resource(np, 0, NULL);
- if (irq)
- pdata->irqs[id] = irq;
-}
static int __devinit mdio_ofgpio_probe(struct of_device *ofdev,
const struct of_device_id *match)
{
- struct device_node *np = NULL;
struct mdio_gpio_platform_data *pdata;
+ struct mii_bus *new_bus;
int ret;
pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
ret = of_get_gpio(ofdev->node, 1);
if (ret < 0)
- goto out_free;
+ goto out_free;
pdata->mdio = ret;
- while ((np = of_get_next_child(ofdev->node, np)))
- if (!strcmp(np->type, "ethernet-phy"))
- add_phy(pdata, np);
+ new_bus = mdio_gpio_bus_init(&ofdev->dev, pdata, pdata->mdc);
+ if (!new_bus)
+ return -ENODEV;
- return mdio_gpio_bus_init(&ofdev->dev, pdata, pdata->mdc);
+ ret = of_mdiobus_register(new_bus, ofdev->node);
+ if (ret)
+ mdio_gpio_bus_deinit(&ofdev->dev);
+
+ return ret;
out_free:
kfree(pdata);
err = fixup->run(phydev);
- if (err < 0)
+ if (err < 0) {
+ mutex_unlock(&phy_fixup_lock);
return err;
+ }
}
}
mutex_unlock(&phy_fixup_lock);
.ndo_stop = plip_close,
.ndo_start_xmit = plip_tx_packet,
.ndo_do_ioctl = plip_ioctl,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
};
/* Entry point of PLIP driver.
if (!skb_queue_empty(&ap->rqueue))
tasklet_schedule(&ap->tsk);
ap_put(ap);
+ tty_unthrottle(tty);
}
static void
/* create a fragment for each channel */
bits = B;
- while (nfree > 0 && len > 0) {
+ while (len > 0) {
list = list->next;
if (list == &ppp->channels) {
i = 0;
*otherwise divide it according to the speed
*of the channel we are going to transmit on
*/
- if (pch->speed == 0) {
- flen = totlen/nfree ;
- if (nbigger > 0) {
- flen++;
- nbigger--;
- }
- } else {
- flen = (((totfree - nzero)*(totlen + hdrlen*totfree)) /
- ((totspeed*totfree)/pch->speed)) - hdrlen;
- if (nbigger > 0) {
- flen += ((totfree - nzero)*pch->speed)/totspeed;
- nbigger -= ((totfree - nzero)*pch->speed)/
+ if (nfree > 0) {
+ if (pch->speed == 0) {
+ flen = totlen/nfree ;
+ if (nbigger > 0) {
+ flen++;
+ nbigger--;
+ }
+ } else {
+ flen = (((totfree - nzero)*(totlen + hdrlen*totfree)) /
+ ((totspeed*totfree)/pch->speed)) - hdrlen;
+ if (nbigger > 0) {
+ flen += ((totfree - nzero)*pch->speed)/totspeed;
+ nbigger -= ((totfree - nzero)*pch->speed)/
totspeed;
+ }
}
+ nfree--;
}
- nfree--;
/*
*check if we are on the last channel or
*we exceded the lenght of the data to
*fragment
*/
- if ((nfree == 0) || (flen > len))
+ if ((nfree <= 0) || (flen > len))
flen = len;
/*
*it is not worth to tx on slow channels:
continue;
}
- mtu = pch->chan->mtu + 2 - hdrlen;
+ mtu = pch->chan->mtu - hdrlen;
if (mtu < 4)
mtu = 4;
if (flen > mtu)
if (!skb_queue_empty(&ap->rqueue))
tasklet_schedule(&ap->tsk);
sp_put(ap);
+ tty_unthrottle(tty);
}
static void
else {
int hash = hash_item(po->pppoe_pa.sid, po->pppoe_pa.remote);
+ po = NULL;
while (++hash < PPPOE_HASH_SIZE) {
po = pn->hash_table[hash];
if (po)
static void __exit pppol2tp_exit(void)
{
unregister_pppox_proto(PX_PROTO_OL2TP);
+ unregister_pernet_gen_device(pppol2tp_net_id, &pppol2tp_net_ops);
proto_unregister(&pppol2tp_sk_proto);
}
.ndo_set_multicast_list = gelic_net_set_multi,
.ndo_change_mtu = gelic_net_change_mtu,
.ndo_tx_timeout = gelic_net_tx_timeout,
+ .ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = gelic_net_poll_controller,
.ndo_set_multicast_list = gelic_net_set_multi,
.ndo_change_mtu = gelic_net_change_mtu,
.ndo_tx_timeout = gelic_net_tx_timeout,
+ .ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = gelic_net_poll_controller,
}
}
- pci_set_master(pdev);
-
/* ioremap MMIO region */
ioaddr = ioremap(pci_resource_start(pdev, region), R8169_REGS_SIZE);
if (!ioaddr) {
RTL_W16(IntrStatus, 0xffff);
+ pci_set_master(pdev);
+
/* Identify chip attached to board */
rtl8169_get_mac_version(tp, ioaddr);
spin_unlock_irq(&tp->lock);
if (system_state == SYSTEM_POWER_OFF) {
+ /* WoL fails with some 8168 when the receiver is disabled. */
+ if (tp->features & RTL_FEATURE_WOL) {
+ pci_clear_master(pdev);
+
+ RTL_W8(ChipCmd, CmdRxEnb);
+ /* PCI commit */
+ RTL_R8(ChipCmd);
+ }
+
pci_wake_from_d3(pdev, true);
pci_set_power_state(pdev, PCI_D3hot);
}
struct s6gmac *pd = netdev_priv(dev);
int i = 0;
struct phy_device *p = NULL;
- while ((!(p = pd->mii.bus->phy_map[i])) && (i < PHY_MAX_ADDR))
+ while ((i < PHY_MAX_ADDR) && (!(p = pd->mii.bus->phy_map[i])))
i++;
p = phy_connect(dev, dev_name(&p->dev), &s6gmac_adjust_link, 0,
PHY_INTERFACE_MODE_RGMII);
static struct pci_device_id sc92031_pci_device_id_table[] __devinitdata = {
{ PCI_DEVICE(PCI_VENDOR_ID_SILAN, 0x2031) },
{ PCI_DEVICE(PCI_VENDOR_ID_SILAN, 0x8139) },
+ { PCI_DEVICE(0x1088, 0x2031) },
{ 0, }
};
MODULE_DEVICE_TABLE(pci, sc92031_pci_device_id_table);
skge->speed = -1;
skge->advertising = skge_supported_modes(hw);
- if (device_may_wakeup(&hw->pdev->dev))
+ if (device_can_wakeup(&hw->pdev->dev)) {
skge->wol = wol_supported(hw) & WAKE_MAGIC;
+ device_set_wakeup_enable(&hw->pdev->dev, skge->wol);
+ }
hw->dev[port] = dev;
/* reset the Rx prefetch unit */
sky2_write32(hw, Y2_QADDR(rxq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET);
-
- /* Reset the RAM Buffer receive queue */
- sky2_write8(hw, RB_ADDR(rxq, RB_CTRL), RB_RST_SET);
-
- /* Reset Rx MAC FIFO */
- sky2_write8(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), GMF_RST_SET);
-
- sky2_read8(hw, B0_CTST);
+ mmiowb();
}
/* Clean out receive buffer area, assumes receiver hardware stopped */
sky2_set_vlan_mode(hw, port, sky2->vlgrp != NULL);
#endif
+ sky2->restarting = 0;
+
err = sky2_rx_start(sky2);
if (err)
goto err_out;
sky2_set_multicast(dev);
+ /* wake queue incase we are restarting */
+ netif_wake_queue(dev);
+
if (netif_msg_ifup(sky2))
printk(KERN_INFO PFX "%s: enabling interface\n", dev->name);
return 0;
/* Number of list elements available for next tx */
static inline int tx_avail(const struct sky2_port *sky2)
{
+ if (unlikely(sky2->restarting))
+ return 0;
return sky2->tx_pending - tx_dist(sky2->tx_cons, sky2->tx_prod);
}
if (netif_msg_ifdown(sky2))
printk(KERN_INFO PFX "%s: disabling interface\n", dev->name);
- /* Disable port IRQ */
- imask = sky2_read32(hw, B0_IMSK);
- imask &= ~portirq_msk[port];
- sky2_write32(hw, B0_IMSK, imask);
- sky2_read32(hw, B0_IMSK);
+ /* explicitly shut off tx incase we're restarting */
+ sky2->restarting = 1;
+ netif_tx_disable(dev);
/* Force flow control off */
sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), RB_RST_SET);
- sky2_rx_stop(sky2);
-
sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET);
sky2_write32(hw, STAT_ISR_TIMER_CNT, 0);
sky2_read8(hw, STAT_ISR_TIMER_CTRL);
+ sky2_rx_stop(sky2);
+
+ /* Disable port IRQ */
+ imask = sky2_read32(hw, B0_IMSK);
+ imask &= ~portirq_msk[port];
+ sky2_write32(hw, B0_IMSK, imask);
+ sky2_read32(hw, B0_IMSK);
+
synchronize_irq(hw->pdev->irq);
napi_synchronize(&hw->napi);
{
struct sky2_port *sky2 = netdev_priv(dev);
- if (netif_running(dev)) {
+ if (likely(netif_running(dev) && !sky2->restarting)) {
netif_tx_lock(dev);
sky2_tx_complete(sky2, last);
netif_tx_unlock(dev);
spin_lock_init(&sky2->phy_lock);
sky2->tx_pending = TX_DEF_PENDING;
sky2->rx_pending = RX_DEF_PENDING;
+ sky2->restarting = 0;
hw->dev[port] = dev;
u8 duplex; /* DUPLEX_HALF, DUPLEX_FULL */
u8 rx_csum;
u8 wol;
+ u8 restarting;
enum flow_control flow_mode;
enum flow_control flow_status;
/* this enables an interrupt in the interrupt mask register */
#define SMC_ENABLE_INT(lp, x) do { \
unsigned char mask; \
- spin_lock_irq(&lp->lock); \
+ unsigned long smc_enable_flags; \
+ spin_lock_irqsave(&lp->lock, smc_enable_flags); \
mask = SMC_GET_INT_MASK(lp); \
mask |= (x); \
SMC_SET_INT_MASK(lp, mask); \
- spin_unlock_irq(&lp->lock); \
+ spin_unlock_irqrestore(&lp->lock, smc_enable_flags); \
} while (0)
/* this disables an interrupt from the interrupt mask register */
#define SMC_DISABLE_INT(lp, x) do { \
unsigned char mask; \
- spin_lock_irq(&lp->lock); \
+ unsigned long smc_disable_flags; \
+ spin_lock_irqsave(&lp->lock, smc_disable_flags); \
mask = SMC_GET_INT_MASK(lp); \
mask &= ~(x); \
SMC_SET_INT_MASK(lp, mask); \
- spin_unlock_irq(&lp->lock); \
+ spin_unlock_irqrestore(&lp->lock, smc_disable_flags); \
} while (0)
/*
* any other concurrent access and C would always interrupt B. But life
* isn't that easy in a SMP world...
*/
-#define smc_special_trylock(lock) \
+#define smc_special_trylock(lock, flags) \
({ \
int __ret; \
- local_irq_disable(); \
+ local_irq_save(flags); \
__ret = spin_trylock(lock); \
if (!__ret) \
- local_irq_enable(); \
+ local_irq_restore(flags); \
__ret; \
})
-#define smc_special_lock(lock) spin_lock_irq(lock)
-#define smc_special_unlock(lock) spin_unlock_irq(lock)
+#define smc_special_lock(lock, flags) spin_lock_irqsave(lock, flags)
+#define smc_special_unlock(lock, flags) spin_unlock_irqrestore(lock, flags)
#else
-#define smc_special_trylock(lock) (1)
-#define smc_special_lock(lock) do { } while (0)
-#define smc_special_unlock(lock) do { } while (0)
+#define smc_special_trylock(lock, flags) (1)
+#define smc_special_lock(lock, flags) do { } while (0)
+#define smc_special_unlock(lock, flags) do { } while (0)
#endif
/*
struct sk_buff *skb;
unsigned int packet_no, len;
unsigned char *buf;
+ unsigned long flags;
DBG(3, "%s: %s\n", dev->name, __func__);
- if (!smc_special_trylock(&lp->lock)) {
+ if (!smc_special_trylock(&lp->lock, flags)) {
netif_stop_queue(dev);
tasklet_schedule(&lp->tx_task);
return;
skb = lp->pending_tx_skb;
if (unlikely(!skb)) {
- smc_special_unlock(&lp->lock);
+ smc_special_unlock(&lp->lock, flags);
return;
}
lp->pending_tx_skb = NULL;
printk("%s: Memory allocation failed.\n", dev->name);
dev->stats.tx_errors++;
dev->stats.tx_fifo_errors++;
- smc_special_unlock(&lp->lock);
+ smc_special_unlock(&lp->lock, flags);
goto done;
}
/* queue the packet for TX */
SMC_SET_MMU_CMD(lp, MC_ENQUEUE);
- smc_special_unlock(&lp->lock);
+ smc_special_unlock(&lp->lock, flags);
dev->trans_start = jiffies;
dev->stats.tx_packets++;
struct smc_local *lp = netdev_priv(dev);
void __iomem *ioaddr = lp->base;
unsigned int numPages, poll_count, status;
+ unsigned long flags;
DBG(3, "%s: %s\n", dev->name, __func__);
return 0;
}
- smc_special_lock(&lp->lock);
+ smc_special_lock(&lp->lock, flags);
/* now, try to allocate the memory */
SMC_SET_MMU_CMD(lp, MC_ALLOC | numPages);
}
} while (--poll_count);
- smc_special_unlock(&lp->lock);
+ smc_special_unlock(&lp->lock, flags);
lp->pending_tx_skb = skb;
if (!poll_count) {
.ndo_start_xmit = smc_hard_start_xmit,
.ndo_tx_timeout = smc_timeout,
.ndo_set_multicast_list = smc_set_multicast_list,
+ .ndo_change_mtu = eth_change_mtu,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = eth_mac_addr,
#ifdef CONFIG_NET_POLL_CONTROLLER
#define SMC_outsb(a, r, p, l) writesb((a) + (r), p, (l))
#define SMC_IRQ_FLAGS (-1) /* from resource */
-#elif defined(CONFIG_MACH_LOGICPD_PXA270)
+#elif defined(CONFIG_MACH_LOGICPD_PXA270) \
+ || defined(CONFIG_MACH_NOMADIK_8815NHK)
#define SMC_CAN_USE_8BIT 0
#define SMC_CAN_USE_16BIT 1
.ndo_get_stats = smsc911x_get_stats,
.ndo_set_multicast_list = smsc911x_set_multicast_list,
.ndo_do_ioctl = smsc911x_do_ioctl,
+ .ndo_change_mtu = eth_change_mtu,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = smsc911x_set_mac_address,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_open = vnet_open,
.ndo_stop = vnet_close,
.ndo_set_multicast_list = vnet_set_rx_mode,
+ .ndo_change_mtu = eth_change_mtu,
.ndo_set_mac_address = vnet_set_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
.ndo_tx_timeout = vnet_tx_timeout,
.ndo_change_mtu = vnet_change_mtu,
.ndo_start_xmit = vnet_start_xmit,
find_turbo_adapters(io);
- for (i = 0; io[i] && (i < IBMTR_MAX_ADAPTERS); i++) {
+ for (i = 0; i < IBMTR_MAX_ADAPTERS && io[i]; i++) {
struct net_device *dev;
irq[i] = 0;
mem[i] = 0;
if ((id == 0) || (id == 65535)) continue; /* Valid ID? */
for (j=0; j<limit; j++) { /* Search PHY table */
if (id != phy_info[j].id) continue; /* ID match? */
- for (k=0; lp->phy[k].id && (k < DE4X5_MAX_PHY); k++);
+ for (k=0; k < DE4X5_MAX_PHY && lp->phy[k].id; k++);
if (k < DE4X5_MAX_PHY) {
memcpy((char *)&lp->phy[k],
(char *)&phy_info[j], sizeof(struct phy_table));
break;
}
if ((j == limit) && (i < DE4X5_MAX_MII)) {
- for (k=0; lp->phy[k].id && (k < DE4X5_MAX_PHY); k++);
+ for (k=0; k < DE4X5_MAX_PHY && lp->phy[k].id; k++);
lp->phy[k].addr = i;
lp->phy[k].id = id;
lp->phy[k].spd.reg = GENERIC_REG; /* ANLPA register */
purgatory:
lp->active = 0;
if (lp->phy[0].id) { /* Reset the PHY devices */
- for (k=0; lp->phy[k].id && (k < DE4X5_MAX_PHY); k++) { /*For each PHY*/
+ for (k=0; k < DE4X5_MAX_PHY && lp->phy[k].id; k++) { /*For each PHY*/
mii_wr(MII_CR_RST, MII_CR, lp->phy[k].addr, DE4X5_MII);
while (mii_rd(MII_CR, lp->phy[k].addr, DE4X5_MII) & MII_CR_RST);
int entry;
u32 flag;
dma_addr_t mapping;
+ unsigned long flags;
- spin_lock_irq(&tp->lock);
+ spin_lock_irqsave(&tp->lock, flags);
/* Calculate the next Tx descriptor entry. */
entry = tp->cur_tx % TX_RING_SIZE;
/* Trigger an immediate transmit demand. */
iowrite32(0, tp->base_addr + CSR1);
- spin_unlock_irq(&tp->lock);
+ spin_unlock_irqrestore(&tp->lock, flags);
dev->trans_start = jiffies;
static int tun_attach(struct tun_struct *tun, struct file *file)
{
struct tun_file *tfile = file->private_data;
- const struct cred *cred = current_cred();
int err;
ASSERT_RTNL();
- /* Check permissions */
- if (((tun->owner != -1 && cred->euid != tun->owner) ||
- (tun->group != -1 && !in_egroup_p(tun->group))) &&
- !capable(CAP_NET_ADMIN))
- return -EPERM;
-
netif_tx_lock_bh(tun->dev);
err = -EINVAL;
dev = __dev_get_by_name(net, ifr->ifr_name);
if (dev) {
+ const struct cred *cred = current_cred();
+
if (ifr->ifr_flags & IFF_TUN_EXCL)
return -EBUSY;
if ((ifr->ifr_flags & IFF_TUN) && dev->netdev_ops == &tun_netdev_ops)
else
return -EINVAL;
+ if (((tun->owner != -1 && cred->euid != tun->owner) ||
+ (tun->group != -1 && !in_egroup_p(tun->group))) &&
+ !capable(CAP_NET_ADMIN))
+ return -EPERM;
+ err = security_tun_dev_attach(tun->sk);
+ if (err < 0)
+ return err;
+
err = tun_attach(tun, file);
if (err < 0)
return err;
if (!capable(CAP_NET_ADMIN))
return -EPERM;
+ err = security_tun_dev_create();
+ if (err < 0)
+ return err;
/* Set dev type */
if (ifr->ifr_flags & IFF_TUN) {
tun->sk = sk;
container_of(sk, struct tun_sock, sk)->tun = tun;
+ security_tun_dev_post_create(sk);
+
tun_net_init(dev);
if (strchr(dev->name, '%')) {
return err;
}
-static int tun_get_iff(struct net *net, struct file *file, struct ifreq *ifr)
+static int tun_get_iff(struct net *net, struct tun_struct *tun,
+ struct ifreq *ifr)
{
- struct tun_struct *tun = tun_get(file);
-
- if (!tun)
- return -EBADFD;
-
DBG(KERN_INFO "%s: tun_get_iff\n", tun->dev->name);
strcpy(ifr->ifr_name, tun->dev->name);
ifr->ifr_flags = tun_flags(tun);
- tun_put(tun);
return 0;
}
return 0;
}
-static int tun_chr_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
+static long tun_chr_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
{
struct tun_file *tfile = file->private_data;
struct tun_struct *tun;
(unsigned int __user*)argp);
}
+ rtnl_lock();
+
tun = __tun_get(tfile);
if (cmd == TUNSETIFF && !tun) {
- int err;
-
ifr.ifr_name[IFNAMSIZ-1] = '\0';
- rtnl_lock();
- err = tun_set_iff(tfile->net, file, &ifr);
- rtnl_unlock();
+ ret = tun_set_iff(tfile->net, file, &ifr);
- if (err)
- return err;
+ if (ret)
+ goto unlock;
if (copy_to_user(argp, &ifr, sizeof(ifr)))
- return -EFAULT;
- return 0;
+ ret = -EFAULT;
+ goto unlock;
}
-
+ ret = -EBADFD;
if (!tun)
- return -EBADFD;
+ goto unlock;
DBG(KERN_INFO "%s: tun_chr_ioctl cmd %d\n", tun->dev->name, cmd);
ret = 0;
switch (cmd) {
case TUNGETIFF:
- ret = tun_get_iff(current->nsproxy->net_ns, file, &ifr);
+ ret = tun_get_iff(current->nsproxy->net_ns, tun, &ifr);
if (ret)
break;
case TUNSETLINK:
/* Only allow setting the type when the interface is down */
- rtnl_lock();
if (tun->dev->flags & IFF_UP) {
DBG(KERN_INFO "%s: Linktype set failed because interface is up\n",
tun->dev->name);
DBG(KERN_INFO "%s: linktype set to %d\n", tun->dev->name, tun->dev->type);
ret = 0;
}
- rtnl_unlock();
break;
#ifdef TUN_DEBUG
break;
#endif
case TUNSETOFFLOAD:
- rtnl_lock();
ret = set_offload(tun->dev, arg);
- rtnl_unlock();
break;
case TUNSETTXFILTER:
ret = -EINVAL;
if ((tun->flags & TUN_TYPE_MASK) != TUN_TAP_DEV)
break;
- rtnl_lock();
ret = update_filter(&tun->txflt, (void __user *)arg);
- rtnl_unlock();
break;
case SIOCGIFHWADDR:
DBG(KERN_DEBUG "%s: set hw address: %pM\n",
tun->dev->name, ifr.ifr_hwaddr.sa_data);
- rtnl_lock();
ret = dev_set_mac_address(tun->dev, &ifr.ifr_hwaddr);
- rtnl_unlock();
break;
case TUNGETSNDBUF:
break;
};
- tun_put(tun);
+unlock:
+ rtnl_unlock();
+ if (tun)
+ tun_put(tun);
return ret;
}
.write = do_sync_write,
.aio_write = tun_chr_aio_write,
.poll = tun_chr_poll,
- .ioctl = tun_chr_ioctl,
+ .unlocked_ioctl = tun_chr_ioctl,
.open = tun_chr_open,
.release = tun_chr_close,
.fasync = tun_chr_fasync
priv->oldspeed = 0;
priv->oldduplex = -1;
- if (!ug_info->phy_node)
- return 0;
-
phydev = of_phy_connect(dev, ug_info->phy_node, &adjust_link, 0,
priv->phy_interface);
+ if (!phydev)
+ phydev = of_phy_connect_fixed_link(dev, &adjust_link,
+ priv->phy_interface);
if (!phydev) {
- printk("%s: Could not attach to PHY\n", dev->name);
+ dev_err(&dev->dev, "Could not attach to PHY\n");
return -ENODEV;
}
u8 __iomem *bd; /* BD pointer */
u32 bd_status;
u8 txQ = 0;
+ unsigned long flags;
ugeth_vdbg("%s: IN", __func__);
- spin_lock_irq(&ugeth->lock);
+ spin_lock_irqsave(&ugeth->lock, flags);
dev->stats.tx_bytes += skb->len;
uccf = ugeth->uccf;
out_be16(uccf->p_utodr, UCC_FAST_TOD);
#endif
- spin_unlock_irq(&ugeth->lock);
+ spin_unlock_irqrestore(&ugeth->lock, flags);
return 0;
}
struct ucc_geth_private *ugeth = NULL;
struct ucc_geth_info *ug_info;
struct resource res;
- struct device_node *phy;
int err, ucc_num, max_speed = 0;
- const u32 *fixed_link;
const unsigned int *prop;
const char *sprop;
const void *mac_addr;
ug_info->uf_info.regs = res.start;
ug_info->uf_info.irq = irq_of_parse_and_map(np, 0);
- fixed_link = of_get_property(np, "fixed-link", NULL);
- if (fixed_link) {
- phy = NULL;
- } else {
- phy = of_parse_phandle(np, "phy-handle", 0);
- if (phy == NULL)
- return -ENODEV;
- }
- ug_info->phy_node = phy;
+
+ ug_info->phy_node = of_parse_phandle(np, "phy-handle", 0);
/* Find the TBI PHY node. If it's not there, we don't support SGMII */
ug_info->tbi_node = of_parse_phandle(np, "tbi-handle", 0);
prop = of_get_property(np, "phy-connection-type", NULL);
if (!prop) {
/* handle interface property present in old trees */
- prop = of_get_property(phy, "interface", NULL);
+ prop = of_get_property(ug_info->phy_node, "interface", NULL);
if (prop != NULL) {
phy_interface = enet_to_phy_interface[*prop];
max_speed = enet_to_speed[*prop];
(Powerline Communications) solution with an Intellon
INT51x1/INT5200 chip, like the "devolo dLan duo".
+config USB_CDC_PHONET
+ tristate "CDC Phonet support"
+ depends on PHONET
+ help
+ Choose this option to support the Phonet interface to a Nokia
+ cellular modem, as found on most Nokia handsets with the
+ "PC suite" USB profile.
+
endmenu
obj-$(CONFIG_USB_NET_MCS7830) += mcs7830.o
obj-$(CONFIG_USB_USBNET) += usbnet.o
obj-$(CONFIG_USB_NET_INT51X1) += int51x1.o
+obj-$(CONFIG_USB_CDC_PHONET) += cdc-phonet.o
--- /dev/null
+/*
+ * phonet.c -- USB CDC Phonet host driver
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation. All rights reserved.
+ *
+ * Author: Rémi Denis-Courmont
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/cdc.h>
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/if_phonet.h>
+
+#define PN_MEDIA_USB 0x1B
+
+static const unsigned rxq_size = 17;
+
+struct usbpn_dev {
+ struct net_device *dev;
+
+ struct usb_interface *intf, *data_intf;
+ struct usb_device *usb;
+ unsigned int tx_pipe, rx_pipe;
+ u8 active_setting;
+ u8 disconnected;
+
+ unsigned tx_queue;
+ spinlock_t tx_lock;
+
+ spinlock_t rx_lock;
+ struct sk_buff *rx_skb;
+ struct urb *urbs[0];
+};
+
+static void tx_complete(struct urb *req);
+static void rx_complete(struct urb *req);
+
+/*
+ * Network device callbacks
+ */
+static int usbpn_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct usbpn_dev *pnd = netdev_priv(dev);
+ struct urb *req = NULL;
+ unsigned long flags;
+ int err;
+
+ if (skb->protocol != htons(ETH_P_PHONET))
+ goto drop;
+
+ req = usb_alloc_urb(0, GFP_ATOMIC);
+ if (!req)
+ goto drop;
+ usb_fill_bulk_urb(req, pnd->usb, pnd->tx_pipe, skb->data, skb->len,
+ tx_complete, skb);
+ req->transfer_flags = URB_ZERO_PACKET;
+ err = usb_submit_urb(req, GFP_ATOMIC);
+ if (err) {
+ usb_free_urb(req);
+ goto drop;
+ }
+
+ spin_lock_irqsave(&pnd->tx_lock, flags);
+ pnd->tx_queue++;
+ if (pnd->tx_queue >= dev->tx_queue_len)
+ netif_stop_queue(dev);
+ spin_unlock_irqrestore(&pnd->tx_lock, flags);
+ return 0;
+
+drop:
+ dev_kfree_skb(skb);
+ dev->stats.tx_dropped++;
+ return 0;
+}
+
+static void tx_complete(struct urb *req)
+{
+ struct sk_buff *skb = req->context;
+ struct net_device *dev = skb->dev;
+ struct usbpn_dev *pnd = netdev_priv(dev);
+
+ switch (req->status) {
+ case 0:
+ dev->stats.tx_bytes += skb->len;
+ break;
+
+ case -ENOENT:
+ case -ECONNRESET:
+ case -ESHUTDOWN:
+ dev->stats.tx_aborted_errors++;
+ default:
+ dev->stats.tx_errors++;
+ dev_dbg(&dev->dev, "TX error (%d)\n", req->status);
+ }
+ dev->stats.tx_packets++;
+
+ spin_lock(&pnd->tx_lock);
+ pnd->tx_queue--;
+ netif_wake_queue(dev);
+ spin_unlock(&pnd->tx_lock);
+
+ dev_kfree_skb_any(skb);
+ usb_free_urb(req);
+}
+
+static int rx_submit(struct usbpn_dev *pnd, struct urb *req, gfp_t gfp_flags)
+{
+ struct net_device *dev = pnd->dev;
+ struct page *page;
+ int err;
+
+ page = __netdev_alloc_page(dev, gfp_flags);
+ if (!page)
+ return -ENOMEM;
+
+ usb_fill_bulk_urb(req, pnd->usb, pnd->rx_pipe, page_address(page),
+ PAGE_SIZE, rx_complete, dev);
+ req->transfer_flags = 0;
+ err = usb_submit_urb(req, gfp_flags);
+ if (unlikely(err)) {
+ dev_dbg(&dev->dev, "RX submit error (%d)\n", err);
+ netdev_free_page(dev, page);
+ }
+ return err;
+}
+
+static void rx_complete(struct urb *req)
+{
+ struct net_device *dev = req->context;
+ struct usbpn_dev *pnd = netdev_priv(dev);
+ struct page *page = virt_to_page(req->transfer_buffer);
+ struct sk_buff *skb;
+ unsigned long flags;
+
+ switch (req->status) {
+ case 0:
+ spin_lock_irqsave(&pnd->rx_lock, flags);
+ skb = pnd->rx_skb;
+ if (!skb) {
+ skb = pnd->rx_skb = netdev_alloc_skb(dev, 12);
+ if (likely(skb)) {
+ /* Can't use pskb_pull() on page in IRQ */
+ memcpy(skb_put(skb, 1), page_address(page), 1);
+ skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags,
+ page, 1, req->actual_length);
+ page = NULL;
+ }
+ } else {
+ skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags,
+ page, 0, req->actual_length);
+ page = NULL;
+ }
+ if (req->actual_length < PAGE_SIZE)
+ pnd->rx_skb = NULL; /* Last fragment */
+ else
+ skb = NULL;
+ spin_unlock_irqrestore(&pnd->rx_lock, flags);
+ if (skb) {
+ skb->protocol = htons(ETH_P_PHONET);
+ skb_reset_mac_header(skb);
+ __skb_pull(skb, 1);
+ skb->dev = dev;
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += skb->len;
+
+ netif_rx(skb);
+ }
+ goto resubmit;
+
+ case -ENOENT:
+ case -ECONNRESET:
+ case -ESHUTDOWN:
+ req = NULL;
+ break;
+
+ case -EOVERFLOW:
+ dev->stats.rx_over_errors++;
+ dev_dbg(&dev->dev, "RX overflow\n");
+ break;
+
+ case -EILSEQ:
+ dev->stats.rx_crc_errors++;
+ break;
+ }
+
+ dev->stats.rx_errors++;
+resubmit:
+ if (page)
+ netdev_free_page(dev, page);
+ if (req)
+ rx_submit(pnd, req, GFP_ATOMIC);
+}
+
+static int usbpn_close(struct net_device *dev);
+
+static int usbpn_open(struct net_device *dev)
+{
+ struct usbpn_dev *pnd = netdev_priv(dev);
+ int err;
+ unsigned i;
+ unsigned num = pnd->data_intf->cur_altsetting->desc.bInterfaceNumber;
+
+ err = usb_set_interface(pnd->usb, num, pnd->active_setting);
+ if (err)
+ return err;
+
+ for (i = 0; i < rxq_size; i++) {
+ struct urb *req = usb_alloc_urb(0, GFP_KERNEL);
+
+ if (!req || rx_submit(pnd, req, GFP_KERNEL)) {
+ usbpn_close(dev);
+ return -ENOMEM;
+ }
+ pnd->urbs[i] = req;
+ }
+
+ netif_wake_queue(dev);
+ return 0;
+}
+
+static int usbpn_close(struct net_device *dev)
+{
+ struct usbpn_dev *pnd = netdev_priv(dev);
+ unsigned i;
+ unsigned num = pnd->data_intf->cur_altsetting->desc.bInterfaceNumber;
+
+ netif_stop_queue(dev);
+
+ for (i = 0; i < rxq_size; i++) {
+ struct urb *req = pnd->urbs[i];
+
+ if (!req)
+ continue;
+ usb_kill_urb(req);
+ usb_free_urb(req);
+ pnd->urbs[i] = NULL;
+ }
+
+ return usb_set_interface(pnd->usb, num, !pnd->active_setting);
+}
+
+static int usbpn_set_mtu(struct net_device *dev, int new_mtu)
+{
+ if ((new_mtu < PHONET_MIN_MTU) || (new_mtu > PHONET_MAX_MTU))
+ return -EINVAL;
+
+ dev->mtu = new_mtu;
+ return 0;
+}
+
+static const struct net_device_ops usbpn_ops = {
+ .ndo_open = usbpn_open,
+ .ndo_stop = usbpn_close,
+ .ndo_start_xmit = usbpn_xmit,
+ .ndo_change_mtu = usbpn_set_mtu,
+};
+
+static void usbpn_setup(struct net_device *dev)
+{
+ dev->features = 0;
+ dev->netdev_ops = &usbpn_ops,
+ dev->header_ops = &phonet_header_ops;
+ dev->type = ARPHRD_PHONET;
+ dev->flags = IFF_POINTOPOINT | IFF_NOARP;
+ dev->mtu = PHONET_MAX_MTU;
+ dev->hard_header_len = 1;
+ dev->dev_addr[0] = PN_MEDIA_USB;
+ dev->addr_len = 1;
+ dev->tx_queue_len = 3;
+
+ dev->destructor = free_netdev;
+}
+
+/*
+ * USB driver callbacks
+ */
+static struct usb_device_id usbpn_ids[] = {
+ {
+ .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+ | USB_DEVICE_ID_MATCH_INT_CLASS
+ | USB_DEVICE_ID_MATCH_INT_SUBCLASS,
+ .idVendor = 0x0421, /* Nokia */
+ .bInterfaceClass = USB_CLASS_COMM,
+ .bInterfaceSubClass = 0xFE,
+ },
+ { },
+};
+
+MODULE_DEVICE_TABLE(usb, usbpn_ids);
+
+static struct usb_driver usbpn_driver;
+
+int usbpn_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+ static const char ifname[] = "usbpn%d";
+ const struct usb_cdc_union_desc *union_header = NULL;
+ const struct usb_cdc_header_desc *phonet_header = NULL;
+ const struct usb_host_interface *data_desc;
+ struct usb_interface *data_intf;
+ struct usb_device *usbdev = interface_to_usbdev(intf);
+ struct net_device *dev;
+ struct usbpn_dev *pnd;
+ u8 *data;
+ int len, err;
+
+ data = intf->altsetting->extra;
+ len = intf->altsetting->extralen;
+ while (len >= 3) {
+ u8 dlen = data[0];
+ if (dlen < 3)
+ return -EINVAL;
+
+ /* bDescriptorType */
+ if (data[1] == USB_DT_CS_INTERFACE) {
+ /* bDescriptorSubType */
+ switch (data[2]) {
+ case USB_CDC_UNION_TYPE:
+ if (union_header || dlen < 5)
+ break;
+ union_header =
+ (struct usb_cdc_union_desc *)data;
+ break;
+ case 0xAB:
+ if (phonet_header || dlen < 5)
+ break;
+ phonet_header =
+ (struct usb_cdc_header_desc *)data;
+ break;
+ }
+ }
+ data += dlen;
+ len -= dlen;
+ }
+
+ if (!union_header || !phonet_header)
+ return -EINVAL;
+
+ data_intf = usb_ifnum_to_if(usbdev, union_header->bSlaveInterface0);
+ if (data_intf == NULL)
+ return -ENODEV;
+ /* Data interface has one inactive and one active setting */
+ if (data_intf->num_altsetting != 2)
+ return -EINVAL;
+ if (data_intf->altsetting[0].desc.bNumEndpoints == 0
+ && data_intf->altsetting[1].desc.bNumEndpoints == 2)
+ data_desc = data_intf->altsetting + 1;
+ else
+ if (data_intf->altsetting[0].desc.bNumEndpoints == 2
+ && data_intf->altsetting[1].desc.bNumEndpoints == 0)
+ data_desc = data_intf->altsetting;
+ else
+ return -EINVAL;
+
+ dev = alloc_netdev(sizeof(*pnd) + sizeof(pnd->urbs[0]) * rxq_size,
+ ifname, usbpn_setup);
+ if (!dev)
+ return -ENOMEM;
+
+ pnd = netdev_priv(dev);
+ SET_NETDEV_DEV(dev, &intf->dev);
+ netif_stop_queue(dev);
+
+ pnd->dev = dev;
+ pnd->usb = usb_get_dev(usbdev);
+ pnd->intf = intf;
+ pnd->data_intf = data_intf;
+ spin_lock_init(&pnd->tx_lock);
+ spin_lock_init(&pnd->rx_lock);
+ /* Endpoints */
+ if (usb_pipein(data_desc->endpoint[0].desc.bEndpointAddress)) {
+ pnd->rx_pipe = usb_rcvbulkpipe(usbdev,
+ data_desc->endpoint[0].desc.bEndpointAddress);
+ pnd->tx_pipe = usb_sndbulkpipe(usbdev,
+ data_desc->endpoint[1].desc.bEndpointAddress);
+ } else {
+ pnd->rx_pipe = usb_rcvbulkpipe(usbdev,
+ data_desc->endpoint[1].desc.bEndpointAddress);
+ pnd->tx_pipe = usb_sndbulkpipe(usbdev,
+ data_desc->endpoint[0].desc.bEndpointAddress);
+ }
+ pnd->active_setting = data_desc - data_intf->altsetting;
+
+ err = usb_driver_claim_interface(&usbpn_driver, data_intf, pnd);
+ if (err)
+ goto out;
+
+ /* Force inactive mode until the network device is brought UP */
+ usb_set_interface(usbdev, union_header->bSlaveInterface0,
+ !pnd->active_setting);
+ usb_set_intfdata(intf, pnd);
+
+ err = register_netdev(dev);
+ if (err) {
+ usb_driver_release_interface(&usbpn_driver, data_intf);
+ goto out;
+ }
+
+ dev_dbg(&dev->dev, "USB CDC Phonet device found\n");
+ return 0;
+
+out:
+ usb_set_intfdata(intf, NULL);
+ free_netdev(dev);
+ return err;
+}
+
+static void usbpn_disconnect(struct usb_interface *intf)
+{
+ struct usbpn_dev *pnd = usb_get_intfdata(intf);
+ struct usb_device *usb = pnd->usb;
+
+ if (pnd->disconnected)
+ return;
+
+ pnd->disconnected = 1;
+ usb_driver_release_interface(&usbpn_driver,
+ (pnd->intf == intf) ? pnd->data_intf : pnd->intf);
+ unregister_netdev(pnd->dev);
+ usb_put_dev(usb);
+}
+
+static struct usb_driver usbpn_driver = {
+ .name = "cdc_phonet",
+ .probe = usbpn_probe,
+ .disconnect = usbpn_disconnect,
+ .id_table = usbpn_ids,
+};
+
+static int __init usbpn_init(void)
+{
+ return usb_register(&usbpn_driver);
+}
+
+static void __exit usbpn_exit(void)
+{
+ usb_deregister(&usbpn_driver);
+}
+
+module_init(usbpn_init);
+module_exit(usbpn_exit);
+
+MODULE_AUTHOR("Remi Denis-Courmont");
+MODULE_DESCRIPTION("USB CDC Phonet host interface");
+MODULE_LICENSE("GPL");
* bmCRC = 0 : CRC = 0xDEADBEEF
*/
if (header & BIT(14))
- crc2 = ~crc32_le(~0, skb2->data, len);
+ crc2 = ~crc32_le(~0, skb2->data, skb2->len);
else
crc2 = 0xdeadbeef;
.ndo_tx_timeout = kaweth_tx_timeout,
.ndo_set_multicast_list = kaweth_set_rx_mode,
.ndo_get_stats = kaweth_netdev_stats,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
};
static int kaweth_probe(
.ndo_set_multicast_list = pegasus_set_multicast,
.ndo_get_stats = pegasus_netdev_stats,
.ndo_tx_timeout = pegasus_tx_timeout,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
};
static struct usb_driver pegasus_driver = {
DEFAULT_GPIO_RESET )
PEGASUS_DEV( "IO DATA USB ET/TX-S", VENDOR_IODATA, 0x0913,
DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "IO DATA USB ETX-US2", VENDOR_IODATA, 0x092a,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "Kingston KNU101TX Ethernet", VENDOR_KINGSTON, 0x000a,
DEFAULT_GPIO_RESET)
PEGASUS_DEV( "LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x4002,
.ndo_start_xmit = rhine_start_tx,
.ndo_get_stats = rhine_get_stats,
.ndo_set_multicast_list = rhine_set_rx_mode,
+ .ndo_change_mtu = eth_change_mtu,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = eth_mac_addr,
.ndo_do_ioctl = netdev_ioctl,
struct rhine_private *rp = netdev_priv(dev);
void __iomem *ioaddr = rp->base;
unsigned entry;
+ unsigned long flags;
/* Caution: the write order is important here, set the field
with the "ownership" bits last. */
cpu_to_le32(TXDESC | (skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN));
/* lock eth irq */
- spin_lock_irq(&rp->lock);
+ spin_lock_irqsave(&rp->lock, flags);
wmb();
rp->tx_ring[entry].tx_status = cpu_to_le32(DescOwn);
wmb();
dev->trans_start = jiffies;
- spin_unlock_irq(&rp->lock);
+ spin_unlock_irqrestore(&rp->lock, flags);
if (debug > 4) {
printk(KERN_DEBUG "%s: Transmit frame #%d queued in slot %d.\n",
* mode
*/
if (vptr->rev_id < REV_ID_VT3216_A0) {
- if (vptr->mii_status | VELOCITY_DUPLEX_FULL)
+ if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
BYTE_REG_BITS_ON(TCR_TB2BDIS, ®s->TCR);
else
BYTE_REG_BITS_OFF(TCR_TB2BDIS, ®s->TCR);
struct sk_buff_head recv;
struct sk_buff_head send;
+ /* Work struct for refilling if we run low on memory. */
+ struct delayed_work refill;
+
/* Chain pages by the private ptr. */
struct page *pages;
};
dev_kfree_skb(skb);
}
-static void try_fill_recv_maxbufs(struct virtnet_info *vi)
+static bool try_fill_recv_maxbufs(struct virtnet_info *vi, gfp_t gfp)
{
struct sk_buff *skb;
struct scatterlist sg[2+MAX_SKB_FRAGS];
int num, err, i;
+ bool oom = false;
sg_init_table(sg, 2+MAX_SKB_FRAGS);
for (;;) {
struct virtio_net_hdr *hdr;
skb = netdev_alloc_skb(vi->dev, MAX_PACKET_LEN + NET_IP_ALIGN);
- if (unlikely(!skb))
+ if (unlikely(!skb)) {
+ oom = true;
break;
+ }
skb_reserve(skb, NET_IP_ALIGN);
skb_put(skb, MAX_PACKET_LEN);
if (vi->big_packets) {
for (i = 0; i < MAX_SKB_FRAGS; i++) {
skb_frag_t *f = &skb_shinfo(skb)->frags[i];
- f->page = get_a_page(vi, GFP_ATOMIC);
+ f->page = get_a_page(vi, gfp);
if (!f->page)
break;
if (unlikely(vi->num > vi->max))
vi->max = vi->num;
vi->rvq->vq_ops->kick(vi->rvq);
+ return !oom;
}
-static void try_fill_recv(struct virtnet_info *vi)
+/* Returns false if we couldn't fill entirely (OOM). */
+static bool try_fill_recv(struct virtnet_info *vi, gfp_t gfp)
{
struct sk_buff *skb;
struct scatterlist sg[1];
int err;
+ bool oom = false;
- if (!vi->mergeable_rx_bufs) {
- try_fill_recv_maxbufs(vi);
- return;
- }
+ if (!vi->mergeable_rx_bufs)
+ return try_fill_recv_maxbufs(vi, gfp);
for (;;) {
skb_frag_t *f;
skb = netdev_alloc_skb(vi->dev, GOOD_COPY_LEN + NET_IP_ALIGN);
- if (unlikely(!skb))
+ if (unlikely(!skb)) {
+ oom = true;
break;
+ }
skb_reserve(skb, NET_IP_ALIGN);
f = &skb_shinfo(skb)->frags[0];
- f->page = get_a_page(vi, GFP_ATOMIC);
+ f->page = get_a_page(vi, gfp);
if (!f->page) {
+ oom = true;
kfree_skb(skb);
break;
}
if (unlikely(vi->num > vi->max))
vi->max = vi->num;
vi->rvq->vq_ops->kick(vi->rvq);
+ return !oom;
}
static void skb_recv_done(struct virtqueue *rvq)
}
}
+static void refill_work(struct work_struct *work)
+{
+ struct virtnet_info *vi;
+ bool still_empty;
+
+ vi = container_of(work, struct virtnet_info, refill.work);
+ napi_disable(&vi->napi);
+ try_fill_recv(vi, GFP_KERNEL);
+ still_empty = (vi->num == 0);
+ napi_enable(&vi->napi);
+
+ /* In theory, this can happen: if we don't get any buffers in
+ * we will *never* try to fill again. */
+ if (still_empty)
+ schedule_delayed_work(&vi->refill, HZ/2);
+}
+
static int virtnet_poll(struct napi_struct *napi, int budget)
{
struct virtnet_info *vi = container_of(napi, struct virtnet_info, napi);
received++;
}
- /* FIXME: If we oom and completely run out of inbufs, we need
- * to start a timer trying to fill more. */
- if (vi->num < vi->max / 2)
- try_fill_recv(vi);
+ if (vi->num < vi->max / 2) {
+ if (!try_fill_recv(vi, GFP_ATOMIC))
+ schedule_delayed_work(&vi->refill, 0);
+ }
/* Out of packets? */
if (received < budget) {
vi->vdev = vdev;
vdev->priv = vi;
vi->pages = NULL;
+ INIT_DELAYED_WORK(&vi->refill, refill_work);
/* If they give us a callback when all buffers are done, we don't need
* the timer. */
}
/* Last of all, set up some receive buffers. */
- try_fill_recv(vi);
+ try_fill_recv(vi, GFP_KERNEL);
/* If we didn't even get one input buffer, we're useless. */
if (vi->num == 0) {
unregister:
unregister_netdev(dev);
+ cancel_delayed_work_sync(&vi->refill);
free_vqs:
vdev->config->del_vqs(vdev);
free:
BUG_ON(vi->num != 0);
unregister_netdev(vi->dev);
+ cancel_delayed_work_sync(&vi->refill);
vdev->config->del_vqs(vi->vdev);
readSsidRid(local, &SSID_rid);
/* Check if we asked for `any' */
- if(dwrq->flags == 0) {
+ if (dwrq->flags == 0) {
/* Just send an empty SSID list */
memset(&SSID_rid, 0, sizeof(SSID_rid));
} else {
- int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
+ unsigned index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
/* Check the size of the string */
- if(dwrq->length > IW_ESSID_MAX_SIZE) {
+ if (dwrq->length > IW_ESSID_MAX_SIZE)
return -E2BIG ;
- }
+
/* Check if index is valid */
- if((index < 0) || (index >= 4)) {
+ if (index >= ARRAY_SIZE(SSID_rid.ssids))
return -EINVAL;
- }
/* Set the SSID */
memset(SSID_rid.ssids[index].ssid, 0,
return -EINVAL;
}
clear_bit (FLAG_RADIO_OFF, &local->flags);
- for (i = 0; cap_rid.txPowerLevels[i] && (i < 8); i++)
+ for (i = 0; i < 8 && cap_rid.txPowerLevels[i]; i++)
if (v == cap_rid.txPowerLevels[i]) {
readConfigRid(local, 1);
local->config.txPower = v;
int ret;
mutex_lock(&ar->mutex);
- if ((param) && !(queue > __AR9170_NUM_TXQ)) {
+ if (queue < __AR9170_NUM_TXQ) {
memcpy(&ar->edcf[ar9170_qos_hwmap[queue]],
param, sizeof(*param));
ret = ar9170_set_qos(ar);
- } else
+ } else {
ret = -EINVAL;
+ }
mutex_unlock(&ar->mutex);
return ret;
err = request_firmware(&aru->init_values, "ar9170-1.fw",
&aru->udev->dev);
+ if (err) {
+ dev_err(&aru->udev->dev, "file with init values not found.\n");
+ return err;
+ }
err = request_firmware(&aru->firmware, "ar9170-2.fw", &aru->udev->dev);
if (err) {
release_firmware(aru->init_values);
- dev_err(&aru->udev->dev, "file with init values not found.\n");
+ dev_err(&aru->udev->dev, "firmware file not found.\n");
return err;
}
if (modparam_nohwcrypt)
return -EOPNOTSUPP;
+ if (sc->opmode == NL80211_IFTYPE_AP)
+ return -EOPNOTSUPP;
+
switch (key->alg) {
case ALG_WEP:
case ALG_TKIP:
"Reset ANI state opmode %u\n", ah->opmode);
ah->stats.ast_ani_reset++;
+ if (ah->opmode == NL80211_IFTYPE_AP) {
+ /*
+ * ath9k_hw_ani_control() will only process items set on
+ * ah->ani_function
+ */
+ if (IS_CHAN_2GHZ(chan))
+ ah->ani_function = (ATH9K_ANI_SPUR_IMMUNITY_LEVEL |
+ ATH9K_ANI_FIRSTEP_LEVEL);
+ else
+ ah->ani_function = 0;
+ }
+
ath9k_hw_ani_control(ah, ATH9K_ANI_NOISE_IMMUNITY_LEVEL, 0);
ath9k_hw_ani_control(ah, ATH9K_ANI_SPUR_IMMUNITY_LEVEL, 0);
ath9k_hw_ani_control(ah, ATH9K_ANI_FIRSTEP_LEVEL, 0);
integer = swab32(eep->modalHeader.antCtrlCommon);
eep->modalHeader.antCtrlCommon = integer;
- for (i = 0; i < AR5416_MAX_CHAINS; i++) {
+ for (i = 0; i < AR5416_EEP4K_MAX_CHAINS; i++) {
integer = swab32(eep->modalHeader.antCtrlChain[i]);
eep->modalHeader.antCtrlChain[i] = integer;
}
ctlMode, numCtlModes, isHt40CtlMode,
(pCtlMode[ctlMode] & EXT_ADDITIVE));
- for (i = 0; (i < AR5416_NUM_CTLS) &&
+ for (i = 0; (i < AR5416_EEP4K_NUM_CTLS) &&
pEepData->ctlIndex[i]; i++) {
DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
" LOOP-Ctlidx %d: cfgCtl 0x%2.2x "
return 0;
}
+/*
+ * Some users have reported their EEPROM programmed with
+ * 0x8000 set, this is not a supported regulatory domain
+ * but since we have more than one user with it we need
+ * a solution for them. We default to 0x64, which is the
+ * default Atheros world regulatory domain.
+ */
+static void ath_regd_sanitize(struct ath_regulatory *reg)
+{
+ if (reg->current_rd != COUNTRY_ERD_FLAG)
+ return;
+ printk(KERN_DEBUG "ath: EEPROM regdomain sanitized\n");
+ reg->current_rd = 0x64;
+}
+
int
ath_regd_init(struct ath_regulatory *reg,
struct wiphy *wiphy,
if (!reg)
return -EINVAL;
+ ath_regd_sanitize(reg);
+
printk(KERN_DEBUG "ath: EEPROM regdomain: 0x%0x\n", reg->current_rd);
if (!ath_regd_is_eeprom_valid(reg)) {
return 0;
}
-static int ipw_fw_dma_add_buffer(struct ipw_priv *priv,
- u32 src_phys, u32 dest_address, u32 length)
+static int ipw_fw_dma_add_buffer(struct ipw_priv *priv, dma_addr_t *src_address,
+ int nr, u32 dest_address, u32 len)
{
- u32 bytes_left = length;
- u32 src_offset = 0;
- u32 dest_offset = 0;
- int status = 0;
+ int ret, i;
+ u32 size;
+
IPW_DEBUG_FW(">> \n");
- IPW_DEBUG_FW_INFO("src_phys=0x%x dest_address=0x%x length=0x%x\n",
- src_phys, dest_address, length);
- while (bytes_left > CB_MAX_LENGTH) {
- status = ipw_fw_dma_add_command_block(priv,
- src_phys + src_offset,
- dest_address +
- dest_offset,
- CB_MAX_LENGTH, 0, 0);
- if (status) {
+ IPW_DEBUG_FW_INFO("nr=%d dest_address=0x%x len=0x%x\n",
+ nr, dest_address, len);
+
+ for (i = 0; i < nr; i++) {
+ size = min_t(u32, len - i * CB_MAX_LENGTH, CB_MAX_LENGTH);
+ ret = ipw_fw_dma_add_command_block(priv, src_address[i],
+ dest_address +
+ i * CB_MAX_LENGTH, size,
+ 0, 0);
+ if (ret) {
IPW_DEBUG_FW_INFO(": Failed\n");
return -1;
} else
IPW_DEBUG_FW_INFO(": Added new cb\n");
-
- src_offset += CB_MAX_LENGTH;
- dest_offset += CB_MAX_LENGTH;
- bytes_left -= CB_MAX_LENGTH;
- }
-
- /* add the buffer tail */
- if (bytes_left > 0) {
- status =
- ipw_fw_dma_add_command_block(priv, src_phys + src_offset,
- dest_address + dest_offset,
- bytes_left, 0, 0);
- if (status) {
- IPW_DEBUG_FW_INFO(": Failed on the buffer tail\n");
- return -1;
- } else
- IPW_DEBUG_FW_INFO
- (": Adding new cb - the buffer tail\n");
}
IPW_DEBUG_FW("<< \n");
static int ipw_load_firmware(struct ipw_priv *priv, u8 * data, size_t len)
{
- int rc = -1;
+ int ret = -1;
int offset = 0;
struct fw_chunk *chunk;
- dma_addr_t shared_phys;
- u8 *shared_virt;
+ int total_nr = 0;
+ int i;
+ struct pci_pool *pool;
+ u32 *virts[CB_NUMBER_OF_ELEMENTS_SMALL];
+ dma_addr_t phys[CB_NUMBER_OF_ELEMENTS_SMALL];
IPW_DEBUG_TRACE("<< : \n");
- shared_virt = pci_alloc_consistent(priv->pci_dev, len, &shared_phys);
- if (!shared_virt)
+ pool = pci_pool_create("ipw2200", priv->pci_dev, CB_MAX_LENGTH, 0, 0);
+ if (!pool) {
+ IPW_ERROR("pci_pool_create failed\n");
return -ENOMEM;
-
- memmove(shared_virt, data, len);
+ }
/* Start the Dma */
- rc = ipw_fw_dma_enable(priv);
+ ret = ipw_fw_dma_enable(priv);
/* the DMA is already ready this would be a bug. */
BUG_ON(priv->sram_desc.last_cb_index > 0);
do {
+ u32 chunk_len;
+ u8 *start;
+ int size;
+ int nr = 0;
+
chunk = (struct fw_chunk *)(data + offset);
offset += sizeof(struct fw_chunk);
+ chunk_len = le32_to_cpu(chunk->length);
+ start = data + offset;
+
+ nr = (chunk_len + CB_MAX_LENGTH - 1) / CB_MAX_LENGTH;
+ for (i = 0; i < nr; i++) {
+ virts[total_nr] = pci_pool_alloc(pool, GFP_KERNEL,
+ &phys[total_nr]);
+ if (!virts[total_nr]) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ size = min_t(u32, chunk_len - i * CB_MAX_LENGTH,
+ CB_MAX_LENGTH);
+ memcpy(virts[total_nr], start, size);
+ start += size;
+ total_nr++;
+ /* We don't support fw chunk larger than 64*8K */
+ BUG_ON(total_nr > CB_NUMBER_OF_ELEMENTS_SMALL);
+ }
+
/* build DMA packet and queue up for sending */
/* dma to chunk->address, the chunk->length bytes from data +
* offeset*/
/* Dma loading */
- rc = ipw_fw_dma_add_buffer(priv, shared_phys + offset,
- le32_to_cpu(chunk->address),
- le32_to_cpu(chunk->length));
- if (rc) {
+ ret = ipw_fw_dma_add_buffer(priv, &phys[total_nr - nr],
+ nr, le32_to_cpu(chunk->address),
+ chunk_len);
+ if (ret) {
IPW_DEBUG_INFO("dmaAddBuffer Failed\n");
goto out;
}
- offset += le32_to_cpu(chunk->length);
+ offset += chunk_len;
} while (offset < len);
/* Run the DMA and wait for the answer */
- rc = ipw_fw_dma_kick(priv);
- if (rc) {
+ ret = ipw_fw_dma_kick(priv);
+ if (ret) {
IPW_ERROR("dmaKick Failed\n");
goto out;
}
- rc = ipw_fw_dma_wait(priv);
- if (rc) {
+ ret = ipw_fw_dma_wait(priv);
+ if (ret) {
IPW_ERROR("dmaWaitSync Failed\n");
goto out;
}
- out:
- pci_free_consistent(priv->pci_dev, len, shared_virt, shared_phys);
- return rc;
+ out:
+ for (i = 0; i < total_nr; i++)
+ pci_pool_free(pool, virts[i], phys[i]);
+
+ pci_pool_destroy(pool);
+
+ return ret;
}
/* stop nic */
};
u8 channel;
- while (channel_index < IPW_SCAN_CHANNELS) {
+ while (channel_index < IPW_SCAN_CHANNELS - 1) {
channel =
priv->speed_scan[priv->speed_scan_pos];
if (channel == 0) {
#define IWL_TX_FIFO_NONE 7
/* Minimum number of queues. MAX_NUM is defined in hw specific files */
-#define IWL_MIN_NUM_QUEUES 4
+#define IWL39_MIN_NUM_QUEUES 4
#define IEEE80211_DATA_LEN 2304
#define IEEE80211_4ADDR_LEN 30
struct device_attribute *attr, char *buf)
{
struct iwl_priv *priv = dev_get_drvdata(d);
- int mode = priv->power_data.user_power_setting;
int level = priv->power_data.power_mode;
char *p = buf;
- p += sprintf(p, "INDEX:%d\t", level);
- p += sprintf(p, "USER:%d\n", mode);
+ p += sprintf(p, "%d\n", level);
return p - buf + 1;
}
hw->wiphy->custom_regulatory = true;
+ /* Firmware does not support this */
+ hw->wiphy->disable_beacon_hints = true;
+
hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX;
/* we create the 802.11 header and a zero-length SSID element */
hw->wiphy->max_scan_ie_len = IWL_MAX_PROBE_REQUEST - 24 - 2;
return -ENODATA;
}
+ ptr = priv->eeprom;
+ if (!ptr) {
+ IWL_ERR(priv, "Invalid EEPROM/OTP memory\n");
+ return -ENOMEM;
+ }
+
/* 4 characters for byte 0xYY */
buf = kzalloc(buf_size, GFP_KERNEL);
if (!buf) {
IWL_ERR(priv, "Can not allocate Buffer\n");
return -ENOMEM;
}
-
- ptr = priv->eeprom;
- if (!ptr) {
- IWL_ERR(priv, "Invalid EEPROM/OTP memory\n");
- return -ENOMEM;
- }
pos += scnprintf(buf + pos, buf_size - pos, "NVM Type: %s\n",
(priv->nvm_device_type == NVM_DEVICE_TYPE_OTP)
? "OTP" : "EEPROM");
#define IWL_TX_FIFO_HCCA_2 6
#define IWL_TX_FIFO_NONE 7
-/* Minimum number of queues. MAX_NUM is defined in hw specific files */
-#define IWL_MIN_NUM_QUEUES 4
+/* Minimum number of queues. MAX_NUM is defined in hw specific files.
+ * Set the minimum to accommodate the 4 standard TX queues, 1 command
+ * queue, 2 (unused) HCCA queues, and 4 HT queues (one for each AC) */
+#define IWL_MIN_NUM_QUEUES 10
/* Power management (not Tx power) structures */
unsigned long flags;
spin_lock_irqsave(&priv->sta_lock, flags);
+ IWL_DEBUG_WEP(priv, "Removing default WEP key: idx=%d\n",
+ keyconf->keyidx);
if (!test_and_clear_bit(keyconf->keyidx, &priv->ucode_key_table))
IWL_ERR(priv, "index %d not used in uCode key table.\n",
priv->default_wep_key--;
memset(&priv->wep_keys[keyconf->keyidx], 0, sizeof(priv->wep_keys[0]));
+ if (iwl_is_rfkill(priv)) {
+ IWL_DEBUG_WEP(priv, "Not sending REPLY_WEPKEY command due to RFKILL.\n");
+ spin_unlock_irqrestore(&priv->sta_lock, flags);
+ return 0;
+ }
ret = iwl_send_static_wepkey_cmd(priv, 1);
IWL_DEBUG_WEP(priv, "Remove default WEP key: idx=%d ret=%d\n",
keyconf->keyidx, ret);
priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
+ if (iwl_is_rfkill(priv)) {
+ IWL_DEBUG_WEP(priv, "Not sending REPLY_ADD_STA command because RFKILL enabled. \n");
+ spin_unlock_irqrestore(&priv->sta_lock, flags);
+ return 0;
+ }
ret = iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC);
spin_unlock_irqrestore(&priv->sta_lock, flags);
return ret;
goto drop_unlock;
}
- spin_unlock_irqrestore(&priv->lock, flags);
-
hdr_len = ieee80211_hdrlen(fc);
/* Find (or create) index into station table for destination station */
if (sta_id == IWL_INVALID_STATION) {
IWL_DEBUG_DROP(priv, "Dropping - INVALID STATION: %pM\n",
hdr->addr1);
- goto drop;
+ goto drop_unlock;
}
IWL_DEBUG_TX(priv, "station Id %d\n", sta_id);
txq_id = priv->stations[sta_id].tid[tid].agg.txq_id;
swq_id = iwl_virtual_agg_queue_num(swq_id, txq_id);
}
- priv->stations[sta_id].tid[tid].tfds_in_queue++;
}
txq = &priv->txq[txq_id];
q = &txq->q;
txq->swq_id = swq_id;
- spin_lock_irqsave(&priv->lock, flags);
+ if (unlikely(iwl_queue_space(q) < q->high_mark))
+ goto drop_unlock;
+
+ if (ieee80211_is_data_qos(fc))
+ priv->stations[sta_id].tid[tid].tfds_in_queue++;
/* Set up driver data for this TFD */
memset(&(txq->txb[q->write_ptr]), 0, sizeof(struct iwl_tx_info));
iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd->hdr, hdr_len);
/* Set up entry for this TFD in Tx byte-count array */
- priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq,
+ if (info->flags & IEEE80211_TX_CTL_AMPDU)
+ priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq,
le16_to_cpu(tx_cmd->len));
pci_dma_sync_single_for_device(priv->pci_dev, txcmd_phys,
drop_unlock:
spin_unlock_irqrestore(&priv->lock, flags);
-drop:
return -1;
}
EXPORT_SYMBOL(iwl_tx_skb);
IWL_ERR(priv, "Start AGG on invalid station\n");
return -ENXIO;
}
+ if (unlikely(tid >= MAX_TID_COUNT))
+ return -EINVAL;
if (priv->stations[sta_id].tid[tid].agg.state != IWL_AGG_OFF) {
IWL_ERR(priv, "Start AGG when state is not IWL_AGG_OFF !\n");
struct device_attribute *attr, char *buf)
{
struct iwl_priv *priv = dev_get_drvdata(d);
- int mode = priv->power_data.user_power_setting;
int level = priv->power_data.power_mode;
char *p = buf;
- p += sprintf(p, "INDEX:%d\t", level);
- p += sprintf(p, "USER:%d\n", mode);
+ p += sprintf(p, "%d\n", level);
return p - buf + 1;
}
hw->wiphy->custom_regulatory = true;
+ /* Firmware does not support this */
+ hw->wiphy->disable_beacon_hints = true;
+
hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX_3945;
/* we create the 802.11 header and a zero-length SSID element */
hw->wiphy->max_scan_ie_len = IWL_MAX_PROBE_REQUEST - 24 - 2;
SET_IEEE80211_DEV(hw, &pdev->dev);
if ((iwl3945_mod_params.num_of_queues > IWL39_MAX_NUM_QUEUES) ||
- (iwl3945_mod_params.num_of_queues < IWL_MIN_NUM_QUEUES)) {
+ (iwl3945_mod_params.num_of_queues < IWL39_MIN_NUM_QUEUES)) {
IWL_ERR(priv,
"invalid queues_num, should be between %d and %d\n",
- IWL_MIN_NUM_QUEUES, IWL39_MAX_NUM_QUEUES);
+ IWL39_MIN_NUM_QUEUES, IWL39_MAX_NUM_QUEUES);
err = -EINVAL;
goto out_ieee80211_free_hw;
}
eeprom_rxiq = iwm_eeprom_access(iwm, IWM_EEPROM_CALIB_RXIQ);
if (IS_ERR(eeprom_rxiq)) {
IWM_ERR(iwm, "Couldn't access EEPROM RX IQ entry\n");
+ kfree(rxiq);
return PTR_ERR(eeprom_rxiq);
}
int ret = 0;
wdev = iwm_wdev_alloc(sizeof_bus, dev);
- if (!wdev) {
- dev_err(dev, "no memory for wireless device instance\n");
- return ERR_PTR(-ENOMEM);
- }
+ if (IS_ERR(wdev))
+ return wdev;
iwm = wdev_to_iwm(wdev);
iwm->bus_ops = if_ops;
return;
free_netdev(iwm_to_ndev(iwm));
- iwm_wdev_free(iwm);
iwm_priv_deinit(iwm);
+ iwm_wdev_free(iwm);
}
int iwm_if_add(struct iwm_priv *iwm)
{
u8 i;
- for (i = 0; region[i] && i < COUNTRY_CODE_LEN; i++)
+ for (i = 0; i < COUNTRY_CODE_LEN && region[i]; i++)
region[i] = toupper(region[i]);
for (i = 0; i < ARRAY_SIZE(region_code_mapping); i++) {
/* Clamp region code to 8-bit since FW spec indicates that it should
* only ever be 8-bit, even though the field size is 16-bit. Some firmware
* returns non-zero high 8 bits here.
+ *
+ * Firmware version 4.0.102 used in CF8381 has region code shifted. We
+ * need to check for this problem and handle it properly.
*/
- priv->regioncode = le16_to_cpu(cmd.regioncode) & 0xFF;
+ if (MRVL_FW_MAJOR_REV(priv->fwrelease) == MRVL_FW_V4)
+ priv->regioncode = (le16_to_cpu(cmd.regioncode) >> 8) & 0xFF;
+ else
+ priv->regioncode = le16_to_cpu(cmd.regioncode) & 0xFF;
for (i = 0; i < MRVDRV_MAX_REGION_CODE; i++) {
/* use the region code to search for the index */
/** Mesh enable bit in FW capability */
#define MESH_CAPINFO_ENABLE_MASK (1<<16)
+/** FW definition from Marvell v4 */
+#define MRVL_FW_V4 (0x04)
/** FW definition from Marvell v5 */
#define MRVL_FW_V5 (0x05)
/** FW definition from Marvell v10 */
u8 bss_type;
/* BSS number */
u8 bss_num;
- } bss;
- } u;
+ } __attribute__ ((packed)) bss;
+ } __attribute__ ((packed)) u;
/* SNR */
u8 snr;
* for sending scan commands to the firmware.
*/
#include <linux/types.h>
+#include <linux/kernel.h>
#include <linux/etherdevice.h>
#include <linux/if_arp.h>
#include <asm/unaligned.h>
iwe.u.bitrate.disabled = 0;
iwe.u.bitrate.value = 0;
- for (j = 0; bss->rates[j] && (j < sizeof(bss->rates)); j++) {
+ for (j = 0; j < ARRAY_SIZE(bss->rates) && bss->rates[j]; j++) {
/* Bit rate given in 500 kb/s units */
iwe.u.bitrate.value = bss->rates[j] * 500000;
current_val = iwe_stream_add_value(info, start, current_val,
static void mac80211_hwsim_free(void)
{
struct list_head tmplist, *i, *tmp;
- struct mac80211_hwsim_data *data;
+ struct mac80211_hwsim_data *data, *tmpdata;
INIT_LIST_HEAD(&tmplist);
list_move(i, &tmplist);
spin_unlock_bh(&hwsim_radio_lock);
- list_for_each_entry(data, &tmplist, list) {
+ list_for_each_entry_safe(data, tmpdata, &tmplist, list) {
debugfs_remove(data->debugfs_group);
debugfs_remove(data->debugfs_ps);
debugfs_remove(data->debugfs);
{
printk(KERN_DEBUG "mac80211_hwsim: unregister radios\n");
- unregister_netdev(hwsim_mon);
mac80211_hwsim_free();
+ unregister_netdev(hwsim_mon);
}
*/
};
-#define MWL8K_VIF(_vif) (struct mwl8k_vif *)(&((_vif)->drv_priv))
+#define MWL8K_VIF(_vif) ((struct mwl8k_vif *)&((_vif)->drv_priv))
static const struct ieee80211_channel mwl8k_channels[] = {
{ .center_freq = 2412, .hw_value = 1, },
rmb();
skb = rxq->rx_skb[rxq->rx_head];
+ if (skb == NULL)
+ break;
rxq->rx_skb[rxq->rx_head] = NULL;
rxq->rx_head = (rxq->rx_head + 1) % MWL8K_RX_DESCS;
timeout = wait_for_completion_timeout(&cmd_wait,
msecs_to_jiffies(MWL8K_CMD_TIMEOUT_MS));
+ pci_unmap_single(priv->pdev, dma_addr, dma_size,
+ PCI_DMA_BIDIRECTIONAL);
+
result = &cmd->result;
if (!timeout) {
spin_lock_irq(&priv->fw_lock);
*result);
}
- pci_unmap_single(priv->pdev, dma_addr, dma_size,
- PCI_DMA_BIDIRECTIONAL);
return rc;
}
memset(cmd->perm_addr, 0xff, sizeof(cmd->perm_addr));
cmd->ps_cookie = cpu_to_le32(priv->cookie_dma);
cmd->rx_queue_ptr = cpu_to_le32(priv->rxq[0].rx_desc_dma);
- cmd->num_tx_queues = MWL8K_TX_QUEUES;
+ cmd->num_tx_queues = cpu_to_le32(MWL8K_TX_QUEUES);
for (i = 0; i < MWL8K_TX_QUEUES; i++)
cmd->tx_queue_ptrs[i] = cpu_to_le32(priv->txq[i].tx_desc_dma);
- cmd->num_tx_desc_per_queue = MWL8K_TX_DESCS;
- cmd->total_rx_desc = MWL8K_RX_DESCS;
+ cmd->num_tx_desc_per_queue = cpu_to_le32(MWL8K_TX_DESCS);
+ cmd->total_rx_desc = cpu_to_le32(MWL8K_RX_DESCS);
rc = mwl8k_post_cmd(hw, &cmd->header);
if (!rc) {
SET_IEEE80211_PERM_ADDR(hw, cmd->perm_addr);
priv->num_mcaddrs = le16_to_cpu(cmd->num_mcaddrs);
- priv->fw_rev = cmd->fw_rev;
+ priv->fw_rev = le32_to_cpu(cmd->fw_rev);
priv->hw_rev = cmd->hw_rev;
priv->region_code = le16_to_cpu(cmd->region_code);
}
struct dev_addr_list *mclist = worker->mclist;
struct mwl8k_priv *priv = hw->priv;
- struct mwl8k_vif *mv_vif;
int rc = 0;
if (changed_flags & FIF_BCN_PRBRESP_PROMISC) {
if (*total_flags & FIF_BCN_PRBRESP_PROMISC)
rc = mwl8k_cmd_set_pre_scan(hw);
else {
- mv_vif = MWL8K_VIF(priv->vif);
- rc = mwl8k_cmd_set_post_scan(hw, mv_vif->bssid);
+ u8 *bssid;
+
+ bssid = "\x00\x00\x00\x00\x00\x00";
+ if (priv->vif != NULL)
+ bssid = MWL8K_VIF(priv->vif)->bssid;
+
+ rc = mwl8k_cmd_set_post_scan(hw, bssid);
}
}
ieee80211_stop_queues(hw);
+ ieee80211_unregister_hw(hw);
+
/* Remove tx reclaim tasklet */
tasklet_kill(&priv->tx_reclaim_task);
for (i = 0; i < MWL8K_TX_QUEUES; i++)
mwl8k_txq_reclaim(hw, i, 1);
- ieee80211_unregister_hw(hw);
-
for (i = 0; i < MWL8K_TX_QUEUES; i++)
mwl8k_txq_deinit(hw, i);
int err = 0;
u8 tsc_arr[4][IW_ENCODE_SEQ_MAX_SIZE];
- if ((key < 0) || (key > 4))
+ if ((key < 0) || (key >= 4))
return -EINVAL;
err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_TKIP_IV,
.ndo_start_xmit = orinoco_xmit,
.ndo_set_multicast_list = orinoco_set_multicast_list,
.ndo_change_mtu = orinoco_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
.ndo_tx_timeout = orinoco_tx_timeout,
.ndo_get_stats = orinoco_get_stats,
};
priv->wireless_data.spy_data = &priv->spy_data;
dev->wireless_data = &priv->wireless_data;
#endif
- /* we use the default eth_mac_addr for setting the MAC addr */
/* Reserve space in skb for the SNAP header */
dev->hard_header_len += ENCAPS_OVERHEAD;
hw = p54_init_common(sizeof(*priv));
if (!hw) {
- dev_err(&priv->spi->dev, "could not alloc ieee80211_hw");
+ dev_err(&spi->dev, "could not alloc ieee80211_hw");
return -ENOMEM;
}
rt2500usb_register_read(rt2x00dev, MAC_CSR0, ®);
rt2x00_set_chip(rt2x00dev, RT2570, value, reg);
- if (!rt2x00_check_rev(&rt2x00dev->chip, 0x000ffff0, 0)) {
+ if (!rt2x00_check_rev(&rt2x00dev->chip, 0x000ffff0, 0) ||
+ rt2x00_check_rev(&rt2x00dev->chip, 0x0000000f, 0)) {
+
ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
return -ENODEV;
}
static inline void rt2x00_rf_read(struct rt2x00_dev *rt2x00dev,
const unsigned int word, u32 *data)
{
- *data = rt2x00dev->rf[word];
+ BUG_ON(word < 1 || word > rt2x00dev->ops->rf_size / sizeof(u32));
+ *data = rt2x00dev->rf[word - 1];
}
static inline void rt2x00_rf_write(struct rt2x00_dev *rt2x00dev,
const unsigned int word, u32 data)
{
- rt2x00dev->rf[word] = data;
+ BUG_ON(word < 1 || word > rt2x00dev->ops->rf_size / sizeof(u32));
+ rt2x00dev->rf[word - 1] = data;
}
/*
priv->aifsn[3] = 3; /* AIFSN[AC_BE] */
rtl818x_iowrite8(priv, &priv->map->ACM_CONTROL, 0);
+ /* ENEDCA flag must always be set, transmit issues? */
+ rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_ENEDCA);
+
return 0;
}
rtl818x_iowrite8(priv, &priv->map->BSSID[i],
info->bssid[i]);
+ if (priv->is_rtl8187b)
+ reg = RTL818X_MSR_ENEDCA;
+ else
+ reg = 0;
+
if (is_valid_ether_addr(info->bssid)) {
- reg = RTL818X_MSR_INFRA;
- if (priv->is_rtl8187b)
- reg |= RTL818X_MSR_ENEDCA;
+ reg |= RTL818X_MSR_INFRA;
rtl818x_iowrite8(priv, &priv->map->MSR, reg);
} else {
- reg = RTL818X_MSR_NO_LINK;
+ reg |= RTL818X_MSR_NO_LINK;
rtl818x_iowrite8(priv, &priv->map->MSR, reg);
}
{
struct rtl8187_priv *priv = dev->priv;
- rtl8187_unregister_led(&priv->led_tx);
/* turn the LED off before exiting */
queue_delayed_work(dev->workqueue, &priv->led_off, 0);
cancel_delayed_work_sync(&priv->led_off);
+ cancel_delayed_work_sync(&priv->led_on);
rtl8187_unregister_led(&priv->led_rx);
+ rtl8187_unregister_led(&priv->led_tx);
}
#endif /* def CONFIG_RTL8187_LED */
&& !mac->pass_ctrl)
return 0;
- fc = *(__le16 *)buffer;
+ fc = get_unaligned((__le16*)buffer);
need_padding = ieee80211_is_data_qos(fc) ^ ieee80211_has_a4(fc);
skb = dev_alloc_skb(length + (need_padding ? 2 : 0));
static int yellowfin_open(struct net_device *dev);
static void yellowfin_timer(unsigned long data);
static void yellowfin_tx_timeout(struct net_device *dev);
-static void yellowfin_init_ring(struct net_device *dev);
+static int yellowfin_init_ring(struct net_device *dev);
static int yellowfin_start_xmit(struct sk_buff *skb, struct net_device *dev);
static irqreturn_t yellowfin_interrupt(int irq, void *dev_instance);
static int yellowfin_rx(struct net_device *dev);
{
struct yellowfin_private *yp = netdev_priv(dev);
void __iomem *ioaddr = yp->base;
- int i;
+ int i, ret;
/* Reset the chip. */
iowrite32(0x80000000, ioaddr + DMACtrl);
- i = request_irq(dev->irq, &yellowfin_interrupt, IRQF_SHARED, dev->name, dev);
- if (i) return i;
+ ret = request_irq(dev->irq, &yellowfin_interrupt, IRQF_SHARED, dev->name, dev);
+ if (ret)
+ return ret;
if (yellowfin_debug > 1)
printk(KERN_DEBUG "%s: yellowfin_open() irq %d.\n",
dev->name, dev->irq);
- yellowfin_init_ring(dev);
+ ret = yellowfin_init_ring(dev);
+ if (ret) {
+ free_irq(dev->irq, dev);
+ return ret;
+ }
iowrite32(yp->rx_ring_dma, ioaddr + RxPtr);
iowrite32(yp->tx_ring_dma, ioaddr + TxPtr);
}
/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
-static void yellowfin_init_ring(struct net_device *dev)
+static int yellowfin_init_ring(struct net_device *dev)
{
struct yellowfin_private *yp = netdev_priv(dev);
- int i;
+ int i, j;
yp->tx_full = 0;
yp->cur_rx = yp->cur_tx = 0;
yp->rx_ring[i].addr = cpu_to_le32(pci_map_single(yp->pci_dev,
skb->data, yp->rx_buf_sz, PCI_DMA_FROMDEVICE));
}
+ if (i != RX_RING_SIZE) {
+ for (j = 0; j < i; j++)
+ dev_kfree_skb(yp->rx_skbuff[j]);
+ return -ENOMEM;
+ }
yp->rx_ring[i-1].dbdma_cmd = cpu_to_le32(CMD_STOP);
yp->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
yp->tx_ring[--i].dbdma_cmd = cpu_to_le32(CMD_STOP | BRANCH_ALWAYS);
#else
{
- int j;
-
/* Tx ring needs a pair of descriptors, the second for the status. */
for (i = 0; i < TX_RING_SIZE; i++) {
j = 2*i;
}
#endif
yp->tx_tail_desc = &yp->tx_status[0];
- return;
+ return 0;
}
static int yellowfin_start_xmit(struct sk_buff *skb, struct net_device *dev)
for (i = ARRAY_SIZE(cards)-1; i >= 0; i--)
if (z->id == cards[i].id)
break;
+ if (i < 0)
+ return -ENODEV;
+
board = z->resource.start;
ioaddr = board+cards[i].offset;
dev = alloc_ei_netdev();
* out of the OpenFirmware device tree and using it to populate an mii_bus.
*/
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/netdevice.h>
+#include <linux/err.h>
#include <linux/phy.h>
#include <linux/of.h>
#include <linux/of_mdio.h>
return phy_connect_direct(dev, phy, hndlr, flags, iface) ? NULL : phy;
}
EXPORT_SYMBOL(of_phy_connect);
+
+/**
+ * of_phy_connect_fixed_link - Parse fixed-link property and return a dummy phy
+ * @dev: pointer to net_device claiming the phy
+ * @hndlr: Link state callback for the network device
+ * @iface: PHY data interface type
+ *
+ * This function is a temporary stop-gap and will be removed soon. It is
+ * only to support the fs_enet, ucc_geth and gianfar Ethernet drivers. Do
+ * not call this function from new drivers.
+ */
+struct phy_device *of_phy_connect_fixed_link(struct net_device *dev,
+ void (*hndlr)(struct net_device *),
+ phy_interface_t iface)
+{
+ struct device_node *net_np;
+ char bus_id[MII_BUS_ID_SIZE + 3];
+ struct phy_device *phy;
+ const u32 *phy_id;
+ int sz;
+
+ if (!dev->dev.parent)
+ return NULL;
+
+ net_np = dev_archdata_get_node(&dev->dev.parent->archdata);
+ if (!net_np)
+ return NULL;
+
+ phy_id = of_get_property(net_np, "fixed-link", &sz);
+ if (!phy_id || sz < sizeof(*phy_id))
+ return NULL;
+
+ sprintf(bus_id, PHY_ID_FMT, "0", phy_id[0]);
+
+ phy = phy_connect(dev, bus_id, hndlr, 0, iface);
+ return IS_ERR(phy) ? NULL : phy;
+}
+EXPORT_SYMBOL(of_phy_connect_fixed_link);
#undef CCIO_COLLECT_STATS
#endif
-#include <linux/proc_fs.h>
#include <asm/runway.h> /* for proc_runway_root */
#ifdef DEBUG_CCIO_INIT
dev_name(&bus->self->dev), i,
bus->self->resource[i].start,
bus->self->resource[i].end);
- pci_assign_resource(bus->self, i);
+ WARN_ON(pci_assign_resource(bus->self, i));
DBG("DEBUG %s after assign %d [0x%lx,0x%lx]\n",
dev_name(&bus->self->dev), i,
bus->self->resource[i].start,
ssize_t ret;
int i;
- if (*ppos >= HPEE_MAX_LENGTH)
+ if (*ppos < 0 || *ppos >= HPEE_MAX_LENGTH)
return 0;
count = *ppos + count < HPEE_MAX_LENGTH ? count : HPEE_MAX_LENGTH - *ppos;
}
card = card->next;
}
- printk(KERN_INFO "Found GeckoBoa at 0x%x\n", dev->hpa.start);
+ printk(KERN_INFO "Found GeckoBoa at 0x%llx\n",
+ (unsigned long long) dev->hpa.start);
card->hpa = dev->hpa.start;
card->mmio_region.name = "HP-PB Bus";
status = ccio_request_resource(dev, &card->mmio_region);
if(status < 0) {
- printk(KERN_ERR "%s: failed to claim HP-PB bus space (%08x, %08x)\n",
- __FILE__, card->mmio_region.start, card->mmio_region.end);
+ printk(KERN_ERR "%s: failed to claim HP-PB "
+ "bus space (0x%08llx, 0x%08llx)\n",
+ __FILE__, (unsigned long long) card->mmio_region.start,
+ (unsigned long long) card->mmio_region.end);
}
return 0;
return;
io_pdc_cell = kzalloc(sizeof(pdc_pat_cell_mod_maddr_block_t), GFP_KERNEL);
- if (!pa_pdc_cell) {
+ if (!io_pdc_cell) {
kfree(pa_pdc_cell);
return;
}
if (!i) /* entry is not ready */
return -ENODATA;
- for (i = 0; devpath->layers[i] && (likely(i < 6)); i++)
+ for (i = 0; i < 6 && devpath->layers[i]; i++)
out += sprintf(out, "%u ", devpath->layers[i]);
out += sprintf(out, "\n");
static DEFINE_MUTEX(sn_hotplug_mutex);
-static ssize_t path_show (struct hotplug_slot *bss_hotplug_slot,
- char *buf)
+static ssize_t path_show(struct pci_slot *pci_slot, char *buf)
{
int retval = -ENOENT;
- struct slot *slot = bss_hotplug_slot->private;
+ struct slot *slot = pci_slot->hotplug->private;
if (!slot)
return retval;
return retval;
}
-static struct hotplug_slot_attribute sn_slot_path_attr = __ATTR_RO(path);
+static struct pci_slot_attribute sn_slot_path_attr = __ATTR_RO(path);
static int sn_pci_slot_valid(struct pci_bus *pci_bus, int device)
{
}
set_bit(num, iommu->domain_ids);
- set_bit(iommu->seq_id, &domain->iommu_bmp);
iommu->domains[num] = domain;
id = num;
}
tmp->devfn);
}
+/* Returns a number of VTD pages, but aligned to MM page size */
+static inline unsigned long aligned_nrpages(unsigned long host_addr,
+ size_t size)
+{
+ host_addr &= ~PAGE_MASK;
+ return PAGE_ALIGN(host_addr + size) >> VTD_PAGE_SHIFT;
+}
+
static int __domain_mapping(struct dmar_domain *domain, unsigned long iov_pfn,
struct scatterlist *sg, unsigned long phys_pfn,
unsigned long nr_pages, int prot)
uint64_t tmp;
if (!sg_res) {
- sg_res = (sg->offset + sg->length + VTD_PAGE_SIZE - 1) >> VTD_PAGE_SHIFT;
+ sg_res = aligned_nrpages(sg->offset, sg->length);
sg->dma_address = ((dma_addr_t)iov_pfn << VTD_PAGE_SHIFT) + sg->offset;
sg->dma_length = sg->length;
pteval = page_to_phys(sg_page(sg)) | prot;
return ret;
}
-/* Returns a number of VTD pages, but aligned to MM page size */
-static inline unsigned long aligned_nrpages(unsigned long host_addr,
- size_t size)
-{
- host_addr &= ~PAGE_MASK;
- return PAGE_ALIGN(host_addr + size) >> VTD_PAGE_SHIFT;
-}
-
/* This takes a number of _MM_ pages, not VTD pages */
static struct iova *intel_alloc_iova(struct device *dev,
struct dmar_domain *domain,
int prot = 0;
int ret;
struct intel_iommu *iommu;
+ unsigned long paddr_pfn = paddr >> PAGE_SHIFT;
BUG_ON(dir == DMA_NONE);
* is not a big problem
*/
ret = domain_pfn_mapping(domain, mm_to_dma_pfn(iova->pfn_lo),
- paddr >> VTD_PAGE_SHIFT, size, prot);
+ mm_to_dma_pfn(paddr_pfn), size, prot);
if (ret)
goto error;
start_vpfn = mm_to_dma_pfn(iova->pfn_lo);
- ret = domain_sg_mapping(domain, start_vpfn, sglist, mm_to_dma_pfn(size), prot);
+ ret = domain_sg_mapping(domain, start_vpfn, sglist, size, prot);
if (unlikely(ret)) {
/* clear the page */
dma_pte_clear_range(domain, start_vpfn,
domain->iommu_count = 0;
domain->iommu_coherency = 0;
+ domain->iommu_snooping = 0;
domain->max_addr = 0;
/* always allocate the top pgd */
return desc->irq_2_iommu;
}
-static struct irq_2_iommu *irq_2_iommu_alloc_node(unsigned int irq, int node)
+static struct irq_2_iommu *irq_2_iommu_alloc(unsigned int irq)
{
struct irq_desc *desc;
struct irq_2_iommu *irq_iommu;
- /*
- * alloc irq desc if not allocated already.
- */
- desc = irq_to_desc_alloc_node(irq, node);
+ desc = irq_to_desc(irq);
if (!desc) {
printk(KERN_INFO "can not get irq_desc for %d\n", irq);
return NULL;
irq_iommu = desc->irq_2_iommu;
if (!irq_iommu)
- desc->irq_2_iommu = get_one_free_irq_2_iommu(node);
+ desc->irq_2_iommu = get_one_free_irq_2_iommu(irq_node(irq));
return desc->irq_2_iommu;
}
-static struct irq_2_iommu *irq_2_iommu_alloc(unsigned int irq)
-{
- return irq_2_iommu_alloc_node(irq, cpu_to_node(boot_cpu_id));
-}
-
#else /* !CONFIG_SPARSE_IRQ */
static struct irq_2_iommu irq_2_iommuX[NR_IRQS];
4 * (resno - PCI_IOV_RESOURCES);
}
+/**
+ * pci_sriov_resource_alignment - get resource alignment for VF BAR
+ * @dev: the PCI device
+ * @resno: the resource number
+ *
+ * Returns the alignment of the VF BAR found in the SR-IOV capability.
+ * This is not the same as the resource size which is defined as
+ * the VF BAR size multiplied by the number of VFs. The alignment
+ * is just the VF BAR size.
+ */
+int pci_sriov_resource_alignment(struct pci_dev *dev, int resno)
+{
+ struct resource tmp;
+ enum pci_bar_type type;
+ int reg = pci_iov_resource_bar(dev, resno, &type);
+
+ if (!reg)
+ return 0;
+
+ __pci_read_base(dev, type, &tmp, reg);
+ return resource_alignment(&tmp);
+}
+
/**
* pci_restore_iov_state - restore the state of the IOV capability
* @dev: the PCI device
return error;
}
- return pci_dev->state_saved ? pci_restore_state(pci_dev) : 0;
+ return pci_restore_state(pci_dev);
}
static void pci_pm_default_resume_noirq(struct pci_dev *pci_dev)
int i;
u32 val;
+ if (!dev->state_saved)
+ return 0;
/* PCI Express register must be restored first */
pci_restore_pcie_state(dev);
extern void pci_iov_release(struct pci_dev *dev);
extern int pci_iov_resource_bar(struct pci_dev *dev, int resno,
enum pci_bar_type *type);
+extern int pci_sriov_resource_alignment(struct pci_dev *dev, int resno);
extern void pci_restore_iov_state(struct pci_dev *dev);
extern int pci_iov_bus_range(struct pci_bus *bus);
}
#endif /* CONFIG_PCI_IOV */
+static inline int pci_resource_alignment(struct pci_dev *dev,
+ struct resource *res)
+{
+#ifdef CONFIG_PCI_IOV
+ int resno = res - dev->resource;
+
+ if (resno >= PCI_IOV_RESOURCES && resno <= PCI_IOV_RESOURCE_END)
+ return pci_sriov_resource_alignment(dev, resno);
+#endif
+ return resource_alignment(res);
+}
+
#endif /* DRIVERS_PCI_H */
#include <linux/ioport.h>
#include <linux/cache.h>
#include <linux/slab.h>
-
+#include "pci.h"
static void pbus_assign_resources_sorted(const struct pci_bus *bus)
{
continue;
r_size = resource_size(r);
/* For bridges size != alignment */
- align = resource_alignment(r);
+ align = pci_resource_alignment(dev, r);
order = __ffs(align) - 20;
if (order > 11) {
dev_warn(&dev->dev, "BAR %d bad alignment %llx: "
{
struct resource *res = &dev->resource[resource];
struct resource *root;
- char *dtype = resource < PCI_BRIDGE_RESOURCES ? "device" : "bridge";
int err;
root = pci_find_parent_resource(dev, res);
err = -EINVAL;
if (root != NULL)
- err = insert_resource(root, res);
+ err = request_resource(root, res);
if (err) {
+ const char *dtype = resource < PCI_BRIDGE_RESOURCES ? "device" : "bridge";
dev_err(&dev->dev, "BAR %d: %s of %s %pR\n",
resource,
root ? "address space collision on" :
size = resource_size(res);
min = (res->flags & IORESOURCE_IO) ? PCIBIOS_MIN_IO : PCIBIOS_MIN_MEM;
- align = resource_alignment(res);
+ align = pci_resource_alignment(dev, res);
/* First, try exact prefetching match.. */
ret = pci_bus_alloc_resource(bus, res, size, align, min,
struct pci_bus *bus;
int ret;
- align = resource_alignment(res);
+ align = pci_resource_alignment(dev, res);
if (!align) {
dev_info(&dev->dev, "BAR %d: can't allocate resource (bogus "
"alignment) %pR flags %#lx\n",
if (!(r->flags) || r->parent)
continue;
- r_align = resource_alignment(r);
+ r_align = pci_resource_alignment(dev, r);
if (!r_align) {
dev_warn(&dev->dev, "BAR %d: bogus alignment "
"%pR flags %#lx\n",
struct resource_list *ln = list->next;
if (ln)
- align = resource_alignment(ln->res);
+ align = pci_resource_alignment(ln->dev, ln->res);
if (r_align > align) {
tmp = kmalloc(sizeof(*tmp), GFP_KERNEL);
Say N here, unless you are building a kernel for your own
use, and need to control the important firmware LEDs.
-config THINKPAD_ACPI_DOCK
- bool "Legacy Docking Station Support"
- depends on THINKPAD_ACPI
- depends on ACPI_DOCK=n
- default n
- ---help---
- Allows the thinkpad_acpi driver to handle docking station events.
- This support was made obsolete by the generic ACPI docking station
- support (CONFIG_ACPI_DOCK). It will allow locking and removing the
- laptop from the docking station, but will not properly connect PCI
- devices.
-
- If you are not sure, say N here.
-
-config THINKPAD_ACPI_BAY
- bool "Legacy Removable Bay Support"
- depends on THINKPAD_ACPI
- default y
- ---help---
- Allows the thinkpad_acpi driver to handle removable bays. It will
- electrically disable the device in the bay, and also generate
- notifications when the bay lever is ejected or inserted.
-
- If you are not sure, say Y here.
-
config THINKPAD_ACPI_VIDEO
bool "Video output control support"
depends on THINKPAD_ACPI
{
acpi_status status;
u32 cap = (unsigned long)data;
- status = set_u32(!!blocked, cap);
+ status = set_u32(!blocked, cap);
if (ACPI_FAILURE(status))
return -ENODEV;
return 0;
struct rfkill *bluetooth_rfkill;
struct rfkill *wwan3g_rfkill;
struct hotplug_slot *hotplug_slot;
+ struct work_struct hotplug_work;
};
/* The actual device the driver binds to */
return 0;
}
-static void eeepc_rfkill_hotplug(void)
+static void eeepc_hotplug_work(struct work_struct *work)
{
struct pci_dev *dev;
struct pci_bus *bus = pci_find_bus(0, 1);
if (event != ACPI_NOTIFY_BUS_CHECK)
return;
- eeepc_rfkill_hotplug();
+ schedule_work(&ehotk->hotplug_work);
}
static void eeepc_hotk_notify(struct acpi_device *device, u32 event)
rfkill_set_sw_state(ehotk->wlan_rfkill, wlan != 1);
- eeepc_rfkill_hotplug();
+ schedule_work(&ehotk->hotplug_work);
}
if (ehotk->bluetooth_rfkill)
{
int result = 0;
+ INIT_WORK(&ehotk->hotplug_work, eeepc_hotplug_work);
+
eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6");
eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7");
* the input layer will only actually pass it on if the state
* changed.
*/
-
- input_report_switch(hp_wmi_input_dev, SW_DOCK, hp_wmi_dock_state());
- input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE,
- hp_wmi_tablet_state());
- input_sync(hp_wmi_input_dev);
+ if (hp_wmi_input_dev) {
+ input_report_switch(hp_wmi_input_dev, SW_DOCK,
+ hp_wmi_dock_state());
+ input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE,
+ hp_wmi_tablet_state());
+ input_sync(hp_wmi_input_dev);
+ }
return 0;
}
};
static struct {
-#ifdef CONFIG_THINKPAD_ACPI_BAY
- u32 bay_status:1;
- u32 bay_eject:1;
- u32 bay_status2:1;
- u32 bay_eject2:1;
-#endif
u32 bluetooth:1;
u32 hotkey:1;
u32 hotkey_mask:1;
return 1;
}
-#if defined(CONFIG_THINKPAD_ACPI_DOCK) || defined(CONFIG_THINKPAD_ACPI_BAY)
-static int _sta(acpi_handle handle)
-{
- int status;
-
- if (!handle || !acpi_evalf(handle, &status, "_STA", "d"))
- status = 0;
-
- return status;
-}
-#endif
-
static int issue_thinkpad_cmos_command(int cmos_cmd)
{
if (!cmos_handle)
if (!ibm || !ibm->write)
return -EINVAL;
+ if (count > PAGE_SIZE - 2)
+ return -EINVAL;
kernbuf = kmalloc(count + 2, GFP_KERNEL);
if (!kernbuf)
.exit = light_exit,
};
-/*************************************************************************
- * Dock subdriver
- */
-
-#ifdef CONFIG_THINKPAD_ACPI_DOCK
-
-static void dock_notify(struct ibm_struct *ibm, u32 event);
-static int dock_read(char *p);
-static int dock_write(char *buf);
-
-TPACPI_HANDLE(dock, root, "\\_SB.GDCK", /* X30, X31, X40 */
- "\\_SB.PCI0.DOCK", /* 600e/x,770e,770x,A2xm/p,T20-22,X20-21 */
- "\\_SB.PCI0.PCI1.DOCK", /* all others */
- "\\_SB.PCI.ISA.SLCE", /* 570 */
- ); /* A21e,G4x,R30,R31,R32,R40,R40e,R50e */
-
-/* don't list other alternatives as we install a notify handler on the 570 */
-TPACPI_HANDLE(pci, root, "\\_SB.PCI"); /* 570 */
-
-static const struct acpi_device_id ibm_pci_device_ids[] = {
- {PCI_ROOT_HID_STRING, 0},
- {"", 0},
-};
-
-static struct tp_acpi_drv_struct ibm_dock_acpidriver[2] = {
- {
- .notify = dock_notify,
- .handle = &dock_handle,
- .type = ACPI_SYSTEM_NOTIFY,
- },
- {
- /* THIS ONE MUST NEVER BE USED FOR DRIVER AUTOLOADING.
- * We just use it to get notifications of dock hotplug
- * in very old thinkpads */
- .hid = ibm_pci_device_ids,
- .notify = dock_notify,
- .handle = &pci_handle,
- .type = ACPI_SYSTEM_NOTIFY,
- },
-};
-
-static struct ibm_struct dock_driver_data[2] = {
- {
- .name = "dock",
- .read = dock_read,
- .write = dock_write,
- .acpi = &ibm_dock_acpidriver[0],
- },
- {
- .name = "dock",
- .acpi = &ibm_dock_acpidriver[1],
- },
-};
-
-#define dock_docked() (_sta(dock_handle) & 1)
-
-static int __init dock_init(struct ibm_init_struct *iibm)
-{
- vdbg_printk(TPACPI_DBG_INIT, "initializing dock subdriver\n");
-
- TPACPI_ACPIHANDLE_INIT(dock);
-
- vdbg_printk(TPACPI_DBG_INIT, "dock is %s\n",
- str_supported(dock_handle != NULL));
-
- return (dock_handle)? 0 : 1;
-}
-
-static int __init dock_init2(struct ibm_init_struct *iibm)
-{
- int dock2_needed;
-
- vdbg_printk(TPACPI_DBG_INIT, "initializing dock subdriver part 2\n");
-
- if (dock_driver_data[0].flags.acpi_driver_registered &&
- dock_driver_data[0].flags.acpi_notify_installed) {
- TPACPI_ACPIHANDLE_INIT(pci);
- dock2_needed = (pci_handle != NULL);
- vdbg_printk(TPACPI_DBG_INIT,
- "dock PCI handler for the TP 570 is %s\n",
- str_supported(dock2_needed));
- } else {
- vdbg_printk(TPACPI_DBG_INIT,
- "dock subdriver part 2 not required\n");
- dock2_needed = 0;
- }
-
- return (dock2_needed)? 0 : 1;
-}
-
-static void dock_notify(struct ibm_struct *ibm, u32 event)
-{
- int docked = dock_docked();
- int pci = ibm->acpi->hid && ibm->acpi->device &&
- acpi_match_device_ids(ibm->acpi->device, ibm_pci_device_ids);
- int data;
-
- if (event == 1 && !pci) /* 570 */
- data = 1; /* button */
- else if (event == 1 && pci) /* 570 */
- data = 3; /* dock */
- else if (event == 3 && docked)
- data = 1; /* button */
- else if (event == 3 && !docked)
- data = 2; /* undock */
- else if (event == 0 && docked)
- data = 3; /* dock */
- else {
- printk(TPACPI_ERR "unknown dock event %d, status %d\n",
- event, _sta(dock_handle));
- data = 0; /* unknown */
- }
- acpi_bus_generate_proc_event(ibm->acpi->device, event, data);
- acpi_bus_generate_netlink_event(ibm->acpi->device->pnp.device_class,
- dev_name(&ibm->acpi->device->dev),
- event, data);
-}
-
-static int dock_read(char *p)
-{
- int len = 0;
- int docked = dock_docked();
-
- if (!dock_handle)
- len += sprintf(p + len, "status:\t\tnot supported\n");
- else if (!docked)
- len += sprintf(p + len, "status:\t\tundocked\n");
- else {
- len += sprintf(p + len, "status:\t\tdocked\n");
- len += sprintf(p + len, "commands:\tdock, undock\n");
- }
-
- return len;
-}
-
-static int dock_write(char *buf)
-{
- char *cmd;
-
- if (!dock_docked())
- return -ENODEV;
-
- while ((cmd = next_cmd(&buf))) {
- if (strlencmp(cmd, "undock") == 0) {
- if (!acpi_evalf(dock_handle, NULL, "_DCK", "vd", 0) ||
- !acpi_evalf(dock_handle, NULL, "_EJ0", "vd", 1))
- return -EIO;
- } else if (strlencmp(cmd, "dock") == 0) {
- if (!acpi_evalf(dock_handle, NULL, "_DCK", "vd", 1))
- return -EIO;
- } else
- return -EINVAL;
- }
-
- return 0;
-}
-
-#endif /* CONFIG_THINKPAD_ACPI_DOCK */
-
-/*************************************************************************
- * Bay subdriver
- */
-
-#ifdef CONFIG_THINKPAD_ACPI_BAY
-
-TPACPI_HANDLE(bay, root, "\\_SB.PCI.IDE.SECN.MAST", /* 570 */
- "\\_SB.PCI0.IDE0.IDES.IDSM", /* 600e/x, 770e, 770x */
- "\\_SB.PCI0.SATA.SCND.MSTR", /* T60, X60, Z60 */
- "\\_SB.PCI0.IDE0.SCND.MSTR", /* all others */
- ); /* A21e, R30, R31 */
-TPACPI_HANDLE(bay_ej, bay, "_EJ3", /* 600e/x, A2xm/p, A3x */
- "_EJ0", /* all others */
- ); /* 570,A21e,G4x,R30,R31,R32,R40e,R50e */
-TPACPI_HANDLE(bay2, root, "\\_SB.PCI0.IDE0.PRIM.SLAV", /* A3x, R32 */
- "\\_SB.PCI0.IDE0.IDEP.IDPS", /* 600e/x, 770e, 770x */
- ); /* all others */
-TPACPI_HANDLE(bay2_ej, bay2, "_EJ3", /* 600e/x, 770e, A3x */
- "_EJ0", /* 770x */
- ); /* all others */
-
-static int __init bay_init(struct ibm_init_struct *iibm)
-{
- vdbg_printk(TPACPI_DBG_INIT, "initializing bay subdriver\n");
-
- TPACPI_ACPIHANDLE_INIT(bay);
- if (bay_handle)
- TPACPI_ACPIHANDLE_INIT(bay_ej);
- TPACPI_ACPIHANDLE_INIT(bay2);
- if (bay2_handle)
- TPACPI_ACPIHANDLE_INIT(bay2_ej);
-
- tp_features.bay_status = bay_handle &&
- acpi_evalf(bay_handle, NULL, "_STA", "qv");
- tp_features.bay_status2 = bay2_handle &&
- acpi_evalf(bay2_handle, NULL, "_STA", "qv");
-
- tp_features.bay_eject = bay_handle && bay_ej_handle &&
- (strlencmp(bay_ej_path, "_EJ0") == 0 || experimental);
- tp_features.bay_eject2 = bay2_handle && bay2_ej_handle &&
- (strlencmp(bay2_ej_path, "_EJ0") == 0 || experimental);
-
- vdbg_printk(TPACPI_DBG_INIT,
- "bay 1: status %s, eject %s; bay 2: status %s, eject %s\n",
- str_supported(tp_features.bay_status),
- str_supported(tp_features.bay_eject),
- str_supported(tp_features.bay_status2),
- str_supported(tp_features.bay_eject2));
-
- return (tp_features.bay_status || tp_features.bay_eject ||
- tp_features.bay_status2 || tp_features.bay_eject2)? 0 : 1;
-}
-
-static void bay_notify(struct ibm_struct *ibm, u32 event)
-{
- acpi_bus_generate_proc_event(ibm->acpi->device, event, 0);
- acpi_bus_generate_netlink_event(ibm->acpi->device->pnp.device_class,
- dev_name(&ibm->acpi->device->dev),
- event, 0);
-}
-
-#define bay_occupied(b) (_sta(b##_handle) & 1)
-
-static int bay_read(char *p)
-{
- int len = 0;
- int occupied = bay_occupied(bay);
- int occupied2 = bay_occupied(bay2);
- int eject, eject2;
-
- len += sprintf(p + len, "status:\t\t%s\n",
- tp_features.bay_status ?
- (occupied ? "occupied" : "unoccupied") :
- "not supported");
- if (tp_features.bay_status2)
- len += sprintf(p + len, "status2:\t%s\n", occupied2 ?
- "occupied" : "unoccupied");
-
- eject = tp_features.bay_eject && occupied;
- eject2 = tp_features.bay_eject2 && occupied2;
-
- if (eject && eject2)
- len += sprintf(p + len, "commands:\teject, eject2\n");
- else if (eject)
- len += sprintf(p + len, "commands:\teject\n");
- else if (eject2)
- len += sprintf(p + len, "commands:\teject2\n");
-
- return len;
-}
-
-static int bay_write(char *buf)
-{
- char *cmd;
-
- if (!tp_features.bay_eject && !tp_features.bay_eject2)
- return -ENODEV;
-
- while ((cmd = next_cmd(&buf))) {
- if (tp_features.bay_eject && strlencmp(cmd, "eject") == 0) {
- if (!acpi_evalf(bay_ej_handle, NULL, NULL, "vd", 1))
- return -EIO;
- } else if (tp_features.bay_eject2 &&
- strlencmp(cmd, "eject2") == 0) {
- if (!acpi_evalf(bay2_ej_handle, NULL, NULL, "vd", 1))
- return -EIO;
- } else
- return -EINVAL;
- }
-
- return 0;
-}
-
-static struct tp_acpi_drv_struct ibm_bay_acpidriver = {
- .notify = bay_notify,
- .handle = &bay_handle,
- .type = ACPI_SYSTEM_NOTIFY,
-};
-
-static struct ibm_struct bay_driver_data = {
- .name = "bay",
- .read = bay_read,
- .write = bay_write,
- .acpi = &ibm_bay_acpidriver,
-};
-
-#endif /* CONFIG_THINKPAD_ACPI_BAY */
-
/*************************************************************************
* CMOS subdriver
*/
/* --------------------------------------------------------------------- */
+/*
+ * These are only useful for models that have only one possibility
+ * of GPU. If the BIOS model handles both ATI and Intel, don't use
+ * these quirks.
+ */
+#define TPACPI_BRGHT_Q_NOEC 0x0001 /* Must NOT use EC HBRV */
+#define TPACPI_BRGHT_Q_EC 0x0002 /* Should or must use EC HBRV */
+#define TPACPI_BRGHT_Q_ASK 0x8000 /* Ask for user report */
+
+static const struct tpacpi_quirk brightness_quirk_table[] __initconst = {
+ /* Models with ATI GPUs known to require ECNVRAM mode */
+ TPACPI_Q_IBM('1', 'Y', TPACPI_BRGHT_Q_EC), /* T43/p ATI */
+
+ /* Models with ATI GPUs (waiting confirmation) */
+ TPACPI_Q_IBM('1', 'R', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
+ TPACPI_Q_IBM('1', 'Q', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
+ TPACPI_Q_IBM('7', '6', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
+ TPACPI_Q_IBM('7', '8', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
+
+ /* Models with Intel Extreme Graphics 2 (waiting confirmation) */
+ TPACPI_Q_IBM('1', 'V', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_NOEC),
+ TPACPI_Q_IBM('1', 'W', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_NOEC),
+ TPACPI_Q_IBM('1', 'U', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_NOEC),
+
+ /* Models with Intel GMA900 */
+ TPACPI_Q_IBM('7', '0', TPACPI_BRGHT_Q_NOEC), /* T43, R52 */
+ TPACPI_Q_IBM('7', '4', TPACPI_BRGHT_Q_NOEC), /* X41 */
+ TPACPI_Q_IBM('7', '5', TPACPI_BRGHT_Q_NOEC), /* X41 Tablet */
+};
+
static int __init brightness_init(struct ibm_init_struct *iibm)
{
int b;
+ unsigned long quirks;
vdbg_printk(TPACPI_DBG_INIT, "initializing brightness subdriver\n");
mutex_init(&brightness_mutex);
+ quirks = tpacpi_check_quirks(brightness_quirk_table,
+ ARRAY_SIZE(brightness_quirk_table));
+
/*
* We always attempt to detect acpi support, so as to switch
* Lenovo Vista BIOS to ACPI brightness mode even if we are not
/* TPACPI_BRGHT_MODE_AUTO not implemented yet, just use default */
if (brightness_mode == TPACPI_BRGHT_MODE_AUTO ||
brightness_mode == TPACPI_BRGHT_MODE_MAX) {
- if (thinkpad_id.vendor == PCI_VENDOR_ID_IBM) {
- /*
- * IBM models that define HBRV probably have
- * EC-based backlight level control
- */
- if (acpi_evalf(ec_handle, NULL, "HBRV", "qd"))
- /* T40-T43, R50-R52, R50e, R51e, X31-X41 */
- brightness_mode = TPACPI_BRGHT_MODE_ECNVRAM;
- else
- /* all other IBM ThinkPads */
- brightness_mode = TPACPI_BRGHT_MODE_UCMS_STEP;
- } else
- /* All Lenovo ThinkPads */
+ if (quirks & TPACPI_BRGHT_Q_EC)
+ brightness_mode = TPACPI_BRGHT_MODE_ECNVRAM;
+ else
brightness_mode = TPACPI_BRGHT_MODE_UCMS_STEP;
dbg_printk(TPACPI_DBG_BRGHT,
- "selected brightness_mode=%d\n",
+ "driver auto-selected brightness_mode=%d\n",
brightness_mode);
}
vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_BRGHT,
"brightness is supported\n");
+ if (quirks & TPACPI_BRGHT_Q_ASK) {
+ printk(TPACPI_NOTICE
+ "brightness: will use unverified default: "
+ "brightness_mode=%d\n", brightness_mode);
+ printk(TPACPI_NOTICE
+ "brightness: please report to %s whether it works well "
+ "or not on your ThinkPad\n", TPACPI_MAIL);
+ }
+
ibm_backlight_device->props.max_brightness =
(tp_features.bright_16levels)? 15 : 7;
ibm_backlight_device->props.brightness = b & TP_EC_BACKLIGHT_LVLMSK;
.init = light_init,
.data = &light_driver_data,
},
-#ifdef CONFIG_THINKPAD_ACPI_DOCK
- {
- .init = dock_init,
- .data = &dock_driver_data[0],
- },
- {
- .init = dock_init2,
- .data = &dock_driver_data[1],
- },
-#endif
-#ifdef CONFIG_THINKPAD_ACPI_BAY
- {
- .init = bay_init,
- .data = &bay_driver_data,
- },
-#endif
{
.init = cmos_init,
.data = &cmos_driver_data,
TPACPI_PARAM(bluetooth);
TPACPI_PARAM(video);
TPACPI_PARAM(light);
-#ifdef CONFIG_THINKPAD_ACPI_DOCK
-TPACPI_PARAM(dock);
-#endif
-#ifdef CONFIG_THINKPAD_ACPI_BAY
-TPACPI_PARAM(bay);
-#endif /* CONFIG_THINKPAD_ACPI_BAY */
TPACPI_PARAM(cmos);
TPACPI_PARAM(led);
TPACPI_PARAM(beep);
if (hci_result != HCI_SUCCESS) {
/* Can't do anything useful */
mutex_unlock(&dev->mutex);
+ return;
}
new_rfk_state = value;
acpi_status status;
struct acpi_object_list input;
union acpi_object params[3];
- char method[4] = "WM";
+ char method[5] = "WM";
if (!find_guid(guid_string, &wblock))
return AE_ERROR;
acpi_status status, wc_status = AE_ERROR;
struct acpi_object_list input, wc_input;
union acpi_object wc_params[1], wq_params[1];
- char method[4];
- char wc_method[4] = "WC";
+ char method[5];
+ char wc_method[5] = "WC";
if (!guid_string || !out)
return AE_BAD_PARAMETER;
acpi_handle handle;
struct acpi_object_list input;
union acpi_object params[2];
- char method[4] = "WS";
+ char method[5] = "WS";
if (!guid_string || !in)
return AE_BAD_DATA;
help
Say Y here to enable support for batteries with ds2760 chip.
+config BATTERY_DS2782
+ tristate "DS2782 standalone gas-gauge"
+ depends on I2C
+ help
+ Say Y here to enable support for the DS2782 standalone battery
+ gas-gauge.
+
config BATTERY_PMU
tristate "Apple PMU battery"
depends on PPC32 && ADB_PMU
obj-$(CONFIG_WM8350_POWER) += wm8350_power.o
obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o
+obj-$(CONFIG_BATTERY_DS2782) += ds2782_battery.o
obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o
obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o
obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o
--- /dev/null
+/*
+ * I2C client/driver for the Maxim/Dallas DS2782 Stand-Alone Fuel Gauge IC
+ *
+ * Copyright (C) 2009 Bluewater Systems Ltd
+ *
+ * Author: Ryan Mallon <ryan@bluewatersys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/swab.h>
+#include <linux/i2c.h>
+#include <linux/idr.h>
+#include <linux/power_supply.h>
+
+#define DS2782_REG_RARC 0x06 /* Remaining active relative capacity */
+
+#define DS2782_REG_VOLT_MSB 0x0c
+#define DS2782_REG_TEMP_MSB 0x0a
+#define DS2782_REG_CURRENT_MSB 0x0e
+
+/* EEPROM Block */
+#define DS2782_REG_RSNSP 0x69 /* Sense resistor value */
+
+/* Current unit measurement in uA for a 1 milli-ohm sense resistor */
+#define DS2782_CURRENT_UNITS 1563
+
+#define to_ds2782_info(x) container_of(x, struct ds2782_info, battery)
+
+struct ds2782_info {
+ struct i2c_client *client;
+ struct power_supply battery;
+ int id;
+};
+
+static DEFINE_IDR(battery_id);
+static DEFINE_MUTEX(battery_lock);
+
+static inline int ds2782_read_reg(struct ds2782_info *info, int reg, u8 *val)
+{
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(info->client, reg);
+ if (ret < 0) {
+ dev_err(&info->client->dev, "register read failed\n");
+ return ret;
+ }
+
+ *val = ret;
+ return 0;
+}
+
+static inline int ds2782_read_reg16(struct ds2782_info *info, int reg_msb,
+ s16 *val)
+{
+ int ret;
+
+ ret = swab16(i2c_smbus_read_word_data(info->client, reg_msb));
+ if (ret < 0) {
+ dev_err(&info->client->dev, "register read failed\n");
+ return ret;
+ }
+
+ *val = ret;
+ return 0;
+}
+
+static int ds2782_get_temp(struct ds2782_info *info, int *temp)
+{
+ s16 raw;
+ int err;
+
+ /*
+ * Temperature is measured in units of 0.125 degrees celcius, the
+ * power_supply class measures temperature in tenths of degrees
+ * celsius. The temperature value is stored as a 10 bit number, plus
+ * sign in the upper bits of a 16 bit register.
+ */
+ err = ds2782_read_reg16(info, DS2782_REG_TEMP_MSB, &raw);
+ if (err)
+ return err;
+ *temp = ((raw / 32) * 125) / 100;
+ return 0;
+}
+
+static int ds2782_get_current(struct ds2782_info *info, int *current_uA)
+{
+ int sense_res;
+ int err;
+ u8 sense_res_raw;
+ s16 raw;
+
+ /*
+ * The units of measurement for current are dependent on the value of
+ * the sense resistor.
+ */
+ err = ds2782_read_reg(info, DS2782_REG_RSNSP, &sense_res_raw);
+ if (err)
+ return err;
+ if (sense_res_raw == 0) {
+ dev_err(&info->client->dev, "sense resistor value is 0\n");
+ return -ENXIO;
+ }
+ sense_res = 1000 / sense_res_raw;
+
+ dev_dbg(&info->client->dev, "sense resistor = %d milli-ohms\n",
+ sense_res);
+ err = ds2782_read_reg16(info, DS2782_REG_CURRENT_MSB, &raw);
+ if (err)
+ return err;
+ *current_uA = raw * (DS2782_CURRENT_UNITS / sense_res);
+ return 0;
+}
+
+static int ds2782_get_voltage(struct ds2782_info *info, int *voltage_uA)
+{
+ s16 raw;
+ int err;
+
+ /*
+ * Voltage is measured in units of 4.88mV. The voltage is stored as
+ * a 10-bit number plus sign, in the upper bits of a 16-bit register
+ */
+ err = ds2782_read_reg16(info, DS2782_REG_VOLT_MSB, &raw);
+ if (err)
+ return err;
+ *voltage_uA = (raw / 32) * 4800;
+ return 0;
+}
+
+static int ds2782_get_capacity(struct ds2782_info *info, int *capacity)
+{
+ int err;
+ u8 raw;
+
+ err = ds2782_read_reg(info, DS2782_REG_RARC, &raw);
+ if (err)
+ return err;
+ *capacity = raw;
+ return raw;
+}
+
+static int ds2782_get_status(struct ds2782_info *info, int *status)
+{
+ int err;
+ int current_uA;
+ int capacity;
+
+ err = ds2782_get_current(info, ¤t_uA);
+ if (err)
+ return err;
+
+ err = ds2782_get_capacity(info, &capacity);
+ if (err)
+ return err;
+
+ if (capacity == 100)
+ *status = POWER_SUPPLY_STATUS_FULL;
+ else if (current_uA == 0)
+ *status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ else if (current_uA < 0)
+ *status = POWER_SUPPLY_STATUS_DISCHARGING;
+ else
+ *status = POWER_SUPPLY_STATUS_CHARGING;
+
+ return 0;
+}
+
+static int ds2782_battery_get_property(struct power_supply *psy,
+ enum power_supply_property prop,
+ union power_supply_propval *val)
+{
+ struct ds2782_info *info = to_ds2782_info(psy);
+ int ret;
+
+ switch (prop) {
+ case POWER_SUPPLY_PROP_STATUS:
+ ret = ds2782_get_status(info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_CAPACITY:
+ ret = ds2782_get_capacity(info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = ds2782_get_voltage(info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ ret = ds2782_get_current(info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_TEMP:
+ ret = ds2782_get_temp(info, &val->intval);
+ break;
+
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static enum power_supply_property ds2782_battery_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_TEMP,
+};
+
+static void ds2782_power_supply_init(struct power_supply *battery)
+{
+ battery->type = POWER_SUPPLY_TYPE_BATTERY;
+ battery->properties = ds2782_battery_props;
+ battery->num_properties = ARRAY_SIZE(ds2782_battery_props);
+ battery->get_property = ds2782_battery_get_property;
+ battery->external_power_changed = NULL;
+}
+
+static int ds2782_battery_remove(struct i2c_client *client)
+{
+ struct ds2782_info *info = i2c_get_clientdata(client);
+
+ power_supply_unregister(&info->battery);
+ kfree(info->battery.name);
+
+ mutex_lock(&battery_lock);
+ idr_remove(&battery_id, info->id);
+ mutex_unlock(&battery_lock);
+
+ i2c_set_clientdata(client, info);
+
+ kfree(info);
+ return 0;
+}
+
+static int ds2782_battery_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct ds2782_info *info;
+ int ret;
+ int num;
+
+ /* Get an ID for this battery */
+ ret = idr_pre_get(&battery_id, GFP_KERNEL);
+ if (ret == 0) {
+ ret = -ENOMEM;
+ goto fail_id;
+ }
+
+ mutex_lock(&battery_lock);
+ ret = idr_get_new(&battery_id, client, &num);
+ mutex_unlock(&battery_lock);
+ if (ret < 0)
+ goto fail_id;
+
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info) {
+ ret = -ENOMEM;
+ goto fail_info;
+ }
+
+ info->battery.name = kasprintf(GFP_KERNEL, "ds2782-%d", num);
+ if (!info->battery.name) {
+ ret = -ENOMEM;
+ goto fail_name;
+ }
+
+ i2c_set_clientdata(client, info);
+ info->client = client;
+ ds2782_power_supply_init(&info->battery);
+
+ ret = power_supply_register(&client->dev, &info->battery);
+ if (ret) {
+ dev_err(&client->dev, "failed to register battery\n");
+ goto fail_register;
+ }
+
+ return 0;
+
+fail_register:
+ kfree(info->battery.name);
+fail_name:
+ i2c_set_clientdata(client, info);
+ kfree(info);
+fail_info:
+ mutex_lock(&battery_lock);
+ idr_remove(&battery_id, num);
+ mutex_unlock(&battery_lock);
+fail_id:
+ return ret;
+}
+
+static const struct i2c_device_id ds2782_id[] = {
+ {"ds2782", 0},
+ {},
+};
+
+static struct i2c_driver ds2782_battery_driver = {
+ .driver = {
+ .name = "ds2782-battery",
+ },
+ .probe = ds2782_battery_probe,
+ .remove = ds2782_battery_remove,
+ .id_table = ds2782_id,
+};
+
+static int __init ds2782_init(void)
+{
+ return i2c_add_driver(&ds2782_battery_driver);
+}
+module_init(ds2782_init);
+
+static void __exit ds2782_exit(void)
+{
+ i2c_del_driver(&ds2782_battery_driver);
+}
+module_exit(ds2782_exit);
+
+MODULE_AUTHOR("Ryan Mallon <ryan@bluewatersys.com>");
+MODULE_DESCRIPTION("Maxim/Dallas DS2782 Stand-Alone Fuel Gauage IC driver");
+MODULE_LICENSE("GPL");
* published by the Free Software Foundation.
*/
+#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#define BAT_STAT_AC 0x10
#define BAT_STAT_CHARGING 0x20
#define BAT_STAT_DISCHARGING 0x40
+#define BAT_STAT_TRICKLE 0x80
#define BAT_ERR_INFOFAIL 0x02
#define BAT_ERR_OVERVOLTAGE 0x04
static int olpc_bat_get_status(union power_supply_propval *val, uint8_t ec_byte)
{
if (olpc_platform_info.ecver > 0x44) {
- if (ec_byte & BAT_STAT_CHARGING)
+ if (ec_byte & (BAT_STAT_CHARGING | BAT_STAT_TRICKLE))
val->intval = POWER_SUPPLY_STATUS_CHARGING;
else if (ec_byte & BAT_STAT_DISCHARGING)
val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
It doesn't matter though -- the EC will return the last-known
information, and it's as if we just ran that _little_ bit faster
and managed to read it out before the battery went away. */
- if (!(ec_byte & BAT_STAT_PRESENT) && psp != POWER_SUPPLY_PROP_PRESENT)
+ if (!(ec_byte & (BAT_STAT_PRESENT | BAT_STAT_TRICKLE)) &&
+ psp != POWER_SUPPLY_PROP_PRESENT)
return -ENODEV;
switch (psp) {
return ret;
break;
case POWER_SUPPLY_PROP_PRESENT:
- val->intval = !!(ec_byte & BAT_STAT_PRESENT);
+ val->intval = !!(ec_byte & (BAT_STAT_PRESENT |
+ BAT_STAT_TRICKLE));
break;
case POWER_SUPPLY_PROP_HEALTH:
struct bin_attribute *attr, char *buf, loff_t off, size_t count)
{
uint8_t ec_byte;
- int ret, end;
+ int ret;
+ int i;
if (off >= EEPROM_SIZE)
return 0;
if (off + count > EEPROM_SIZE)
count = EEPROM_SIZE - off;
- end = EEPROM_START + off + count;
- for (ec_byte = EEPROM_START + off; ec_byte < end; ec_byte++) {
- ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1,
- &buf[ec_byte - EEPROM_START], 1);
+ for (i = 0; i < count; i++) {
+ ec_byte = EEPROM_START + off + i;
+ ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &buf[i], 1);
if (ret) {
- printk(KERN_ERR "olpc-battery: EC command "
- "EC_BAT_EEPROM @ 0x%x failed -"
- " %d!\n", ec_byte, ret);
+ pr_err("olpc-battery: "
+ "EC_BAT_EEPROM cmd @ 0x%x failed - %d!\n",
+ ec_byte, ret);
return -EIO;
}
}
}
pps->dev = device_create(pps_class, pps->info.dev, pps->devno, NULL,
"pps%d", pps->id);
- if (err)
+ if (IS_ERR(pps->dev))
goto del_cdev;
dev_set_drvdata(pps->dev, pps);
}
};
+#ifdef CONFIG_PNP
+static bool pnp_driver_registered;
+#endif
+static bool platform_driver_registered;
+
static int __init cmos_init(void)
{
int retval = 0;
#ifdef CONFIG_PNP
- pnp_register_driver(&cmos_pnp_driver);
+ retval = pnp_register_driver(&cmos_pnp_driver);
+ if (retval == 0)
+ pnp_driver_registered = true;
#endif
- if (!cmos_rtc.dev)
+ if (!cmos_rtc.dev) {
retval = platform_driver_probe(&cmos_platform_driver,
cmos_platform_probe);
+ if (retval == 0)
+ platform_driver_registered = true;
+ }
if (retval == 0)
return 0;
#ifdef CONFIG_PNP
- pnp_unregister_driver(&cmos_pnp_driver);
+ if (pnp_driver_registered)
+ pnp_unregister_driver(&cmos_pnp_driver);
#endif
return retval;
}
static void __exit cmos_exit(void)
{
#ifdef CONFIG_PNP
- pnp_unregister_driver(&cmos_pnp_driver);
+ if (pnp_driver_registered)
+ pnp_unregister_driver(&cmos_pnp_driver);
#endif
- platform_driver_unregister(&cmos_platform_driver);
+ if (platform_driver_registered)
+ platform_driver_unregister(&cmos_platform_driver);
}
module_exit(cmos_exit);
* memory and 2) dasd_smalloc_request uses the static ccw memory
* that gets allocated for each device.
*/
-struct dasd_ccw_req *dasd_kmalloc_request(char *magic, int cplength,
+struct dasd_ccw_req *dasd_kmalloc_request(int magic, int cplength,
int datasize,
struct dasd_device *device)
{
struct dasd_ccw_req *cqr;
/* Sanity checks */
- BUG_ON( magic == NULL || datasize > PAGE_SIZE ||
+ BUG_ON(datasize > PAGE_SIZE ||
(cplength*sizeof(struct ccw1)) > PAGE_SIZE);
cqr = kzalloc(sizeof(struct dasd_ccw_req), GFP_ATOMIC);
return ERR_PTR(-ENOMEM);
}
}
- strncpy((char *) &cqr->magic, magic, 4);
- ASCEBC((char *) &cqr->magic, 4);
+ cqr->magic = magic;
set_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags);
dasd_get_device(device);
return cqr;
}
-struct dasd_ccw_req *dasd_smalloc_request(char *magic, int cplength,
+struct dasd_ccw_req *dasd_smalloc_request(int magic, int cplength,
int datasize,
struct dasd_device *device)
{
int size;
/* Sanity checks */
- BUG_ON( magic == NULL || datasize > PAGE_SIZE ||
+ BUG_ON(datasize > PAGE_SIZE ||
(cplength*sizeof(struct ccw1)) > PAGE_SIZE);
size = (sizeof(struct dasd_ccw_req) + 7L) & -8L;
cqr->data = data;
memset(cqr->data, 0, datasize);
}
- strncpy((char *) &cqr->magic, magic, 4);
- ASCEBC((char *) &cqr->magic, 4);
+ cqr->magic = magic;
set_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags);
dasd_get_device(device);
return cqr;
switch (rc) {
case 0:
cqr->status = DASD_CQR_IN_IO;
- DBF_DEV_EVENT(DBF_DEBUG, device,
- "start_IO: request %p started successful",
- cqr);
break;
case -EBUSY:
DBF_DEV_EVENT(DBF_DEBUG, device, "%s",
* for that. State DASD_STATE_ONLINE is normal block device
* operation.
*/
- if (basedev->state < DASD_STATE_READY)
+ if (basedev->state < DASD_STATE_READY) {
+ while ((req = blk_fetch_request(block->request_queue)))
+ __blk_end_request_all(req, -EIO);
return;
+ }
/* Now we try to fetch requests from the request queue */
while (!blk_queue_plugged(queue) && (req = blk_peek_request(queue))) {
if (basedev->features & DASD_FEATURE_READONLY &&
struct dasd_device *base;
block = bdev->bd_disk->private_data;
- base = block->base;
if (!block)
return -ENODEV;
+ base = block->base;
if (!base->discipline ||
!base->discipline->fill_geometry)
static struct dasd_ccw_req *dasd_generic_build_rdc(struct dasd_device *device,
void *rdc_buffer,
int rdc_buffer_size,
- char *magic)
+ int magic)
{
struct dasd_ccw_req *cqr;
struct ccw1 *ccw;
}
-int dasd_generic_read_dev_chars(struct dasd_device *device, char *magic,
+int dasd_generic_read_dev_chars(struct dasd_device *device, int magic,
void *rdc_buffer, int rdc_buffer_size)
{
int ret;
*
*/
-#define KMSG_COMPONENT "dasd"
+#define KMSG_COMPONENT "dasd-eckd"
#include <linux/timer.h>
#include <linux/slab.h>
* Author(s): Stefan Weinhuber <wein@de.ibm.com>
*/
-#define KMSG_COMPONENT "dasd"
+#define KMSG_COMPONENT "dasd-eckd"
#include <linux/list.h>
#include <asm/ebcdic.h>
int rc;
unsigned long flags;
- cqr = dasd_kmalloc_request("ECKD",
- 1 /* PSF */ + 1 /* RSSD */ ,
+ cqr = dasd_kmalloc_request(DASD_ECKD_MAGIC, 1 /* PSF */ + 1 /* RSSD */,
(sizeof(struct dasd_psf_prssd_data)),
device);
if (IS_ERR(cqr))
*
*/
-#define KMSG_COMPONENT "dasd"
+#define KMSG_COMPONENT "dasd-diag"
#include <linux/stddef.h>
#include <linux/kernel.h>
/* Build the request */
datasize = sizeof(struct dasd_diag_req) +
count*sizeof(struct dasd_diag_bio);
- cqr = dasd_smalloc_request(dasd_diag_discipline.name, 0,
- datasize, memdev);
+ cqr = dasd_smalloc_request(DASD_DIAG_MAGIC, 0, datasize, memdev);
if (IS_ERR(cqr))
return cqr;
* Author.........: Nigel Hislop <hislop_nigel@emc.com>
*/
-#define KMSG_COMPONENT "dasd"
+#define KMSG_COMPONENT "dasd-eckd"
#include <linux/stddef.h>
#include <linux/kernel.h>
struct dasd_ccw_req *cqr;
struct ccw1 *ccw;
- cqr = dasd_smalloc_request("ECKD", 1 /* RCD */, ciw->count, device);
+ cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1 /* RCD */, ciw->count,
+ device);
if (IS_ERR(cqr)) {
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
struct dasd_eckd_private *private;
private = (struct dasd_eckd_private *) device->private;
- cqr = dasd_smalloc_request(dasd_eckd_discipline.name,
- 1 /* PSF */ + 1 /* RSSD */ ,
+ cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1 /* PSF */ + 1 /* RSSD */,
(sizeof(struct dasd_psf_prssd_data) +
sizeof(struct dasd_rssd_features)),
device);
struct dasd_psf_ssc_data *psf_ssc_data;
struct ccw1 *ccw;
- cqr = dasd_smalloc_request("ECKD", 1 /* PSF */ ,
+ cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1 /* PSF */ ,
sizeof(struct dasd_psf_ssc_data),
device);
goto out_err3;
/* Read Device Characteristics */
- rc = dasd_generic_read_dev_chars(device, "ECKD", &private->rdc_data,
- 64);
+ rc = dasd_generic_read_dev_chars(device, DASD_ECKD_MAGIC,
+ &private->rdc_data, 64);
if (rc) {
DBF_EVENT(DBF_WARNING,
"Read device characteristics failed, rc=%d for "
cplength = 8;
datasize = sizeof(struct DE_eckd_data) + 2*sizeof(struct LO_eckd_data);
- cqr = dasd_smalloc_request(dasd_eckd_discipline.name,
- cplength, datasize, device);
+ cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, cplength, datasize, device);
if (IS_ERR(cqr))
return cqr;
ccw = cqr->cpaddr;
return ERR_PTR(-EINVAL);
}
/* Allocate the format ccw request. */
- fcp = dasd_smalloc_request(dasd_eckd_discipline.name,
- cplength, datasize, device);
+ fcp = dasd_smalloc_request(DASD_ECKD_MAGIC, cplength, datasize, device);
if (IS_ERR(fcp))
return fcp;
datasize += count*sizeof(struct LO_eckd_data);
}
/* Allocate the ccw request. */
- cqr = dasd_smalloc_request(dasd_eckd_discipline.name,
- cplength, datasize, startdev);
+ cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, cplength, datasize,
+ startdev);
if (IS_ERR(cqr))
return cqr;
ccw = cqr->cpaddr;
cidaw * sizeof(unsigned long long);
/* Allocate the ccw request. */
- cqr = dasd_smalloc_request(dasd_eckd_discipline.name,
- cplength, datasize, startdev);
+ cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, cplength, datasize,
+ startdev);
if (IS_ERR(cqr))
return cqr;
ccw = cqr->cpaddr;
/* Allocate the ccw request. */
itcw_size = itcw_calc_size(0, ctidaw, 0);
- cqr = dasd_smalloc_request(dasd_eckd_discipline.name,
- 0, itcw_size, startdev);
+ cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 0, itcw_size, startdev);
if (IS_ERR(cqr))
return cqr;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
- cqr = dasd_smalloc_request(dasd_eckd_discipline.name,
- 1, 32, device);
+ cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1, 32, device);
if (IS_ERR(cqr)) {
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
"Could not allocate initialization request");
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
- cqr = dasd_smalloc_request(dasd_eckd_discipline.name,
- 1, 32, device);
+ cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1, 32, device);
if (IS_ERR(cqr)) {
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
"Could not allocate initialization request");
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
- cqr = dasd_smalloc_request(dasd_eckd_discipline.name,
- 1, 32, device);
+ cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1, 32, device);
if (IS_ERR(cqr)) {
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
"Could not allocate initialization request");
struct ccw1 *ccw;
int rc;
- cqr = dasd_smalloc_request(dasd_eckd_discipline.name,
- 1 /* PSF */ + 1 /* RSSD */ ,
+ cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1 /* PSF */ + 1 /* RSSD */,
(sizeof(struct dasd_psf_prssd_data) +
sizeof(struct dasd_rssd_perf_stats_t)),
device);
}
/* setup CCWs for PSF + RSSD */
- cqr = dasd_smalloc_request("ECKD", 2 , 0, device);
+ cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 2 , 0, device);
if (IS_ERR(cqr)) {
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
"Could not allocate initialization request");
/* Read Device Characteristics */
memset(&private->rdc_data, 0, sizeof(private->rdc_data));
- rc = dasd_generic_read_dev_chars(device, "ECKD",
+ rc = dasd_generic_read_dev_chars(device, DASD_ECKD_MAGIC,
&private->rdc_data, 64);
if (rc) {
DBF_EVENT(DBF_WARNING,
* Author(s): Stefan Weinhuber <wein@de.ibm.com>
*/
-#define KMSG_COMPONENT "dasd"
+#define KMSG_COMPONENT "dasd-eckd"
#include <linux/init.h>
#include <linux/fs.h>
if (!device->discipline || strcmp(device->discipline->name, "ECKD"))
return -EPERM; /* FIXME: -EMEDIUMTYPE ? */
- cqr = dasd_kmalloc_request("ECKD", 1 /* SNSS */,
+ cqr = dasd_kmalloc_request(DASD_ECKD_MAGIC, 1 /* SNSS */,
SNSS_DATA_SIZE, device);
if (IS_ERR(cqr))
return -ENOMEM;
cqr->lpm = LPM_ANYPATH;
cqr->status = DASD_CQR_FILLED;
} else {
- dev_err(&device->cdev->dev,
- "default ERP has run out of retries and failed\n");
+ pr_err("%s: default ERP has run out of retries and failed\n",
+ dev_name(&device->cdev->dev));
cqr->status = DASD_CQR_FAILED;
cqr->stopclk = get_clock();
}
* Copyright IBM Corp. 1999, 2009
*/
-#define KMSG_COMPONENT "dasd"
+#define KMSG_COMPONENT "dasd-fba"
#include <linux/stddef.h>
#include <linux/kernel.h>
block->base = device;
/* Read Device Characteristics */
- rc = dasd_generic_read_dev_chars(device, "FBA ", &private->rdc_data,
- 32);
+ rc = dasd_generic_read_dev_chars(device, DASD_FBA_MAGIC,
+ &private->rdc_data, 32);
if (rc) {
DBF_EVENT(DBF_WARNING, "Read device characteristics returned "
"error %d for device: %s",
datasize += (count - 1)*sizeof(struct LO_fba_data);
}
/* Allocate the ccw request. */
- cqr = dasd_smalloc_request(dasd_fba_discipline.name,
- cplength, datasize, memdev);
+ cqr = dasd_smalloc_request(DASD_FBA_MAGIC, cplength, datasize, memdev);
if (IS_ERR(cqr))
return cqr;
ccw = cqr->cpaddr;
#include <asm/dasd.h>
#include <asm/idals.h>
+/* DASD discipline magic */
+#define DASD_ECKD_MAGIC 0xC5C3D2C4
+#define DASD_DIAG_MAGIC 0xC4C9C1C7
+#define DASD_FBA_MAGIC 0xC6C2C140
+
/*
* SECTION: Type definitions
*/
extern struct kmem_cache *dasd_page_cache;
struct dasd_ccw_req *
-dasd_kmalloc_request(char *, int, int, struct dasd_device *);
+dasd_kmalloc_request(int , int, int, struct dasd_device *);
struct dasd_ccw_req *
-dasd_smalloc_request(char *, int, int, struct dasd_device *);
+dasd_smalloc_request(int , int, int, struct dasd_device *);
void dasd_kfree_request(struct dasd_ccw_req *, struct dasd_device *);
void dasd_sfree_request(struct dasd_ccw_req *, struct dasd_device *);
int dasd_generic_pm_freeze(struct ccw_device *);
int dasd_generic_restore_device(struct ccw_device *);
-int dasd_generic_read_dev_chars(struct dasd_device *, char *, void *, int);
+int dasd_generic_read_dev_chars(struct dasd_device *, int, void *, int);
char *dasd_get_sense(struct irb *);
/* externals in dasd_devmap.c */
if (!capable (CAP_SYS_ADMIN))
return -EACCES;
- dev_info(&base->cdev->dev, "The DASD has been put in the quiesce "
- "state\n");
+ pr_info("%s: The DASD has been put in the quiesce "
+ "state\n", dev_name(&base->cdev->dev));
spin_lock_irqsave(get_ccwdev_lock(base->cdev), flags);
base->stopped |= DASD_STOPPED_QUIESCE;
spin_unlock_irqrestore(get_ccwdev_lock(base->cdev), flags);
if (!capable (CAP_SYS_ADMIN))
return -EACCES;
- dev_info(&base->cdev->dev, "I/O operations have been resumed "
- "on the DASD\n");
+ pr_info("%s: I/O operations have been resumed "
+ "on the DASD\n", dev_name(&base->cdev->dev));
spin_lock_irqsave(get_ccwdev_lock(base->cdev), flags);
base->stopped &= ~DASD_STOPPED_QUIESCE;
spin_unlock_irqrestore(get_ccwdev_lock(base->cdev), flags);
return -EPERM;
if (base->state != DASD_STATE_BASIC) {
- dev_warn(&base->cdev->dev,
- "The DASD cannot be formatted while it is enabled\n");
+ pr_warning("%s: The DASD cannot be formatted while it is "
+ "enabled\n", dev_name(&base->cdev->dev));
return -EBUSY;
}
dasd_sfree_request(cqr, cqr->memdev);
if (rc) {
if (rc != -ERESTARTSYS)
- dev_err(&base->cdev->dev,
- "Formatting unit %d failed with "
- "rc=%d\n", fdata->start_unit, rc);
+ pr_err("%s: Formatting unit %d failed with "
+ "rc=%d\n", dev_name(&base->cdev->dev),
+ fdata->start_unit, rc);
return rc;
}
fdata->start_unit++;
if (copy_from_user(&fdata, argp, sizeof(struct format_data_t)))
return -EFAULT;
if (bdev != bdev->bd_contains) {
- dev_warn(&block->base->cdev->dev,
- "The specified DASD is a partition and cannot be "
- "formatted\n");
+ pr_warning("%s: The specified DASD is a partition and cannot "
+ "be formatted\n",
+ dev_name(&block->base->cdev->dev));
return -EINVAL;
}
return dasd_format(block, &fdata);
#include <linux/suspend.h>
#include <linux/platform_device.h>
#include <asm/uaccess.h>
-#include <asm/checksum.h>
#define XPRAM_NAME "xpram"
#define XPRAM_DEVS 1 /* one partition */
typedef struct {
unsigned int size; /* size of xpram segment in pages */
unsigned int offset; /* start page of xpram segment */
- unsigned int csum; /* partition checksum for suspend */
} xpram_device_t;
static xpram_device_t xpram_devices[XPRAM_MAX_DEVS];
return rc;
}
-/*
- * Save checksums for all partitions.
- */
-static int xpram_save_checksums(void)
-{
- unsigned long mem_page;
- int rc, i;
-
- rc = 0;
- mem_page = (unsigned long) __get_free_page(GFP_KERNEL);
- if (!mem_page)
- return -ENOMEM;
- for (i = 0; i < xpram_devs; i++) {
- rc = xpram_page_in(mem_page, xpram_devices[i].offset);
- if (rc)
- goto fail;
- xpram_devices[i].csum = csum_partial((const void *) mem_page,
- PAGE_SIZE, 0);
- }
-fail:
- free_page(mem_page);
- return rc ? -ENXIO : 0;
-}
-
-/*
- * Verify checksums for all partitions.
- */
-static int xpram_validate_checksums(void)
-{
- unsigned long mem_page;
- unsigned int csum;
- int rc, i;
-
- rc = 0;
- mem_page = (unsigned long) __get_free_page(GFP_KERNEL);
- if (!mem_page)
- return -ENOMEM;
- for (i = 0; i < xpram_devs; i++) {
- rc = xpram_page_in(mem_page, xpram_devices[i].offset);
- if (rc)
- goto fail;
- csum = csum_partial((const void *) mem_page, PAGE_SIZE, 0);
- if (xpram_devices[i].csum != csum) {
- rc = -EINVAL;
- goto fail;
- }
- }
-fail:
- free_page(mem_page);
- return rc ? -ENXIO : 0;
-}
-
/*
* Resume failed: Print error message and call panic.
*/
xpram_resume_error("xpram disappeared");
if (xpram_pages != xpram_highest_page_index() + 1)
xpram_resume_error("Size of xpram changed");
- if (xpram_validate_checksums())
- xpram_resume_error("Data of xpram changed");
return 0;
}
-/*
- * Save necessary state in suspend.
- */
-static int xpram_freeze(struct device *dev)
-{
- return xpram_save_checksums();
-}
-
static struct dev_pm_ops xpram_pm_ops = {
- .freeze = xpram_freeze,
.restore = xpram_restore,
};
You should only select this option if you know what you are doing,
need this feature and intend to run your kernel in LPAR.
+config SCLP_ASYNC
+ tristate "Support for Call Home via Asynchronous SCLP Records"
+ depends on S390
+ help
+ This option enables the call home function, which is able to inform
+ the service element and connected organisations about a kernel panic.
+ You should only select this option if you know what you are doing,
+ want for inform other people about your kernel panics,
+ need this feature and intend to run your kernel in LPAR.
+
config S390_TAPE
tristate "S/390 tape device support"
depends on CCW
obj-$(CONFIG_SCLP_CONSOLE) += sclp_con.o
obj-$(CONFIG_SCLP_VT220_TTY) += sclp_vt220.o
obj-$(CONFIG_SCLP_CPI) += sclp_cpi.o
+obj-$(CONFIG_SCLP_ASYNC) += sclp_async.o
obj-$(CONFIG_ZVM_WATCHDOG) += vmwatchdog.o
obj-$(CONFIG_VMLOGRDR) += vmlogrdr.o
monreader_device->release = (void (*)(struct device *))kfree;
rc = device_register(monreader_device);
if (rc) {
- kfree(monreader_device);
+ put_device(monreader_device);
goto out_driver;
}
#define EVTYP_VT220MSG 0x1A
#define EVTYP_CONFMGMDATA 0x04
#define EVTYP_SDIAS 0x1C
+#define EVTYP_ASYNC 0x0A
#define EVTYP_OPCMD_MASK 0x80000000
#define EVTYP_MSG_MASK 0x40000000
#define EVTYP_VT220MSG_MASK 0x00000040
#define EVTYP_CONFMGMDATA_MASK 0x10000000
#define EVTYP_SDIAS_MASK 0x00000010
+#define EVTYP_ASYNC_MASK 0x00400000
#define GNRLMSGFLGS_DOM 0x8000
#define GNRLMSGFLGS_SNDALRM 0x4000
} __attribute__((packed));
extern u64 sclp_facilities;
-
#define SCLP_HAS_CHP_INFO (sclp_facilities & 0x8000000000000000ULL)
#define SCLP_HAS_CHP_RECONFIG (sclp_facilities & 0x2000000000000000ULL)
#define SCLP_HAS_CPU_INFO (sclp_facilities & 0x0800000000000000ULL)
#define SCLP_HAS_CPU_RECONFIG (sclp_facilities & 0x0400000000000000ULL)
+
struct gds_subvector {
u8 length;
u8 key;
--- /dev/null
+/*
+ * Enable Asynchronous Notification via SCLP.
+ *
+ * Copyright IBM Corp. 2009
+ * Author(s): Hans-Joachim Picht <hans@linux.vnet.ibm.com>
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/stat.h>
+#include <linux/string.h>
+#include <linux/ctype.h>
+#include <linux/kmod.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/proc_fs.h>
+#include <linux/sysctl.h>
+#include <linux/utsname.h>
+#include "sclp.h"
+
+static int callhome_enabled;
+static struct sclp_req *request;
+static struct sclp_async_sccb *sccb;
+static int sclp_async_send_wait(char *message);
+static struct ctl_table_header *callhome_sysctl_header;
+static DEFINE_SPINLOCK(sclp_async_lock);
+static char nodename[64];
+#define SCLP_NORMAL_WRITE 0x00
+
+struct async_evbuf {
+ struct evbuf_header header;
+ u64 reserved;
+ u8 rflags;
+ u8 empty;
+ u8 rtype;
+ u8 otype;
+ char comp_id[12];
+ char data[3000]; /* there is still some space left */
+} __attribute__((packed));
+
+struct sclp_async_sccb {
+ struct sccb_header header;
+ struct async_evbuf evbuf;
+} __attribute__((packed));
+
+static struct sclp_register sclp_async_register = {
+ .send_mask = EVTYP_ASYNC_MASK,
+};
+
+static int call_home_on_panic(struct notifier_block *self,
+ unsigned long event, void *data)
+{
+ strncat(data, nodename, strlen(nodename));
+ sclp_async_send_wait(data);
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block call_home_panic_nb = {
+ .notifier_call = call_home_on_panic,
+ .priority = INT_MAX,
+};
+
+static int proc_handler_callhome(ctl_table *ctl, int write, struct file *filp,
+ void __user *buffer, size_t *count,
+ loff_t *ppos)
+{
+ unsigned long val;
+ int len, rc;
+ char buf[2];
+
+ if (!*count | (*ppos && !write)) {
+ *count = 0;
+ return 0;
+ }
+ if (!write) {
+ len = sprintf(buf, "%d\n", callhome_enabled);
+ buf[len] = '\0';
+ rc = copy_to_user(buffer, buf, sizeof(buf));
+ if (rc != 0)
+ return -EFAULT;
+ } else {
+ len = *count;
+ rc = copy_from_user(buf, buffer, sizeof(buf));
+ if (rc != 0)
+ return -EFAULT;
+ if (strict_strtoul(buf, 0, &val) != 0)
+ return -EINVAL;
+ if (val != 0 && val != 1)
+ return -EINVAL;
+ callhome_enabled = val;
+ }
+ *count = len;
+ *ppos += len;
+ return 0;
+}
+
+static struct ctl_table callhome_table[] = {
+ {
+ .procname = "callhome",
+ .mode = 0644,
+ .proc_handler = &proc_handler_callhome,
+ },
+ { .ctl_name = 0 }
+};
+
+static struct ctl_table kern_dir_table[] = {
+ {
+ .ctl_name = CTL_KERN,
+ .procname = "kernel",
+ .maxlen = 0,
+ .mode = 0555,
+ .child = callhome_table,
+ },
+ { .ctl_name = 0 }
+};
+
+/*
+ * Function used to transfer asynchronous notification
+ * records which waits for send completion
+ */
+static int sclp_async_send_wait(char *message)
+{
+ struct async_evbuf *evb;
+ int rc;
+ unsigned long flags;
+
+ if (!callhome_enabled)
+ return 0;
+ sccb->evbuf.header.type = EVTYP_ASYNC;
+ sccb->evbuf.rtype = 0xA5;
+ sccb->evbuf.otype = 0x00;
+ evb = &sccb->evbuf;
+ request->command = SCLP_CMDW_WRITE_EVENT_DATA;
+ request->sccb = sccb;
+ request->status = SCLP_REQ_FILLED;
+ strncpy(sccb->evbuf.data, message, sizeof(sccb->evbuf.data));
+ /*
+ * Retain Queue
+ * e.g. 5639CC140 500 Red Hat RHEL5 Linux for zSeries (RHEL AS)
+ */
+ strncpy(sccb->evbuf.comp_id, "000000000", sizeof(sccb->evbuf.comp_id));
+ sccb->evbuf.header.length = sizeof(sccb->evbuf);
+ sccb->header.length = sizeof(sccb->evbuf) + sizeof(sccb->header);
+ sccb->header.function_code = SCLP_NORMAL_WRITE;
+ rc = sclp_add_request(request);
+ if (rc)
+ return rc;
+ spin_lock_irqsave(&sclp_async_lock, flags);
+ while (request->status != SCLP_REQ_DONE &&
+ request->status != SCLP_REQ_FAILED) {
+ sclp_sync_wait();
+ }
+ spin_unlock_irqrestore(&sclp_async_lock, flags);
+ if (request->status != SCLP_REQ_DONE)
+ return -EIO;
+ rc = ((struct sclp_async_sccb *)
+ request->sccb)->header.response_code;
+ if (rc != 0x0020)
+ return -EIO;
+ if (evb->header.flags != 0x80)
+ return -EIO;
+ return rc;
+}
+
+static int __init sclp_async_init(void)
+{
+ int rc;
+
+ rc = sclp_register(&sclp_async_register);
+ if (rc)
+ return rc;
+ callhome_sysctl_header = register_sysctl_table(kern_dir_table);
+ if (!callhome_sysctl_header) {
+ rc = -ENOMEM;
+ goto out_sclp;
+ }
+ if (!(sclp_async_register.sclp_receive_mask & EVTYP_ASYNC_MASK)) {
+ rc = -EOPNOTSUPP;
+ goto out_sclp;
+ }
+ rc = -ENOMEM;
+ request = kzalloc(sizeof(struct sclp_req), GFP_KERNEL);
+ if (!request)
+ goto out_sys;
+ sccb = (struct sclp_async_sccb *) get_zeroed_page(GFP_KERNEL | GFP_DMA);
+ if (!sccb)
+ goto out_mem;
+ rc = atomic_notifier_chain_register(&panic_notifier_list,
+ &call_home_panic_nb);
+ if (rc)
+ goto out_mem;
+
+ strncpy(nodename, init_utsname()->nodename, 64);
+ return 0;
+
+out_mem:
+ kfree(request);
+ free_page((unsigned long) sccb);
+out_sys:
+ unregister_sysctl_table(callhome_sysctl_header);
+out_sclp:
+ sclp_unregister(&sclp_async_register);
+ return rc;
+
+}
+module_init(sclp_async_init);
+
+static void __exit sclp_async_exit(void)
+{
+ atomic_notifier_chain_unregister(&panic_notifier_list,
+ &call_home_panic_nb);
+ unregister_sysctl_table(callhome_sysctl_header);
+ sclp_unregister(&sclp_async_register);
+ free_page((unsigned long) sccb);
+ kfree(request);
+}
+module_exit(sclp_async_exit);
+
+MODULE_AUTHOR("Copyright IBM Corp. 2009");
+MODULE_AUTHOR("Hans-Joachim Picht <hans@linux.vnet.ibm.com>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("SCLP Asynchronous Notification Records");
* Martin Schwidefsky <schwidefsky@de.ibm.com>
*/
-#define KMSG_COMPONENT "tape"
+#define KMSG_COMPONENT "tape_34xx"
#include <linux/module.h>
#include <linux/init.h>
* Martin Schwidefsky <schwidefsky@de.ibm.com>
*/
-#define KMSG_COMPONENT "tape"
+#define KMSG_COMPONENT "tape_3590"
#include <linux/module.h>
#include <linux/init.h>
* - Read Alternate: implemented
*******************************************************************/
-#define KMSG_COMPONENT "tape"
-
static const char *tape_3590_msg[TAPE_3590_MAX_MSG] = {
[0x00] = "",
[0x10] = "Lost Sense",
if (!device->blk_data.medium_changed)
return 0;
- dev_info(&device->cdev->dev, "Determining the size of the recorded "
- "area...\n");
rc = tape_mtop(device, MTFSFM, 1);
if (rc)
return rc;
if (rc < 0)
return rc;
+ pr_info("%s: Determining the size of the recorded area...\n",
+ dev_name(&device->cdev->dev));
DBF_LH(3, "Image file ends at %d\n", rc);
nr_of_blks = rc;
device->bof = rc;
nr_of_blks -= rc;
- dev_info(&device->cdev->dev, "The size of the recorded area is %i "
- "blocks\n", nr_of_blks);
+ pr_info("%s: The size of the recorded area is %i blocks\n",
+ dev_name(&device->cdev->dev), nr_of_blks);
set_capacity(device->blk_data.disk,
nr_of_blks*(TAPEBLOCK_HSEC_SIZE/512));
if (device->required_tapemarks) {
DBF_EVENT(2, "TBLOCK: missing tapemarks\n");
- dev_warn(&device->cdev->dev, "Opening the tape failed because"
- " of missing end-of-file marks\n");
+ pr_warning("%s: Opening the tape failed because of missing "
+ "end-of-file marks\n", dev_name(&device->cdev->dev));
rc = -EPERM;
goto put_device;
}
switch(newstate){
case MS_UNLOADED:
device->tape_generic_status |= GMT_DR_OPEN(~0);
- dev_info(&device->cdev->dev, "The tape cartridge has been "
- "successfully unloaded\n");
+ if (device->medium_state == MS_LOADED)
+ pr_info("%s: The tape cartridge has been successfully "
+ "unloaded\n", dev_name(&device->cdev->dev));
break;
case MS_LOADED:
device->tape_generic_status &= ~GMT_DR_OPEN(~0);
- dev_info(&device->cdev->dev, "A tape cartridge has been "
- "mounted\n");
+ if (device->medium_state == MS_UNLOADED)
+ pr_info("%s: A tape cartridge has been mounted\n",
+ dev_name(&device->cdev->dev));
break;
default:
// print nothing
out_char:
tapechar_cleanup_device(device);
+out_minor:
+ tape_remove_minor(device);
out_discipline:
device->discipline->cleanup_device(device);
device->discipline = NULL;
-out_minor:
- tape_remove_minor(device);
out:
module_put(discipline->owner);
return rc;
*/
DBF_EVENT(3, "(%08x): Drive in use vanished!\n",
device->cdev_id);
- dev_warn(&device->cdev->dev, "A tape unit was detached"
- " while in use\n");
+ pr_warning("%s: A tape unit was detached while in "
+ "use\n", dev_name(&device->cdev->dev));
tape_state_set(device, TS_NOT_OPER);
__tape_discard_requests(device);
spin_unlock_irq(get_ccwdev_lock(device->cdev));
* to another host (actually this shouldn't happen but it does).
* So we set up a timeout for this call.
*/
- init_timer(&timeout);
+ init_timer_on_stack(&timeout);
timeout.function = tape_std_assign_timeout;
timeout.data = (unsigned long) request;
timeout.expires = jiffies + 2 * HZ;
} else
return -ENOMEM;
ret = device_register(dev);
- if (ret)
+ if (ret) {
+ put_device(dev);
return ret;
+ }
ret = sysfs_create_group(&dev->kobj, &vmlogrdr_attr_group);
if (ret) {
debug_set_level(vmur_dbf, 6);
+ vmur_class = class_create(THIS_MODULE, "vmur");
+ if (IS_ERR(vmur_class)) {
+ rc = PTR_ERR(vmur_class);
+ goto fail_free_dbf;
+ }
+
rc = ccw_driver_register(&ur_driver);
if (rc)
- goto fail_free_dbf;
+ goto fail_class_destroy;
rc = alloc_chrdev_region(&dev, 0, NUM_MINORS, "vmur");
if (rc) {
}
ur_first_dev_maj_min = MKDEV(MAJOR(dev), 0);
- vmur_class = class_create(THIS_MODULE, "vmur");
- if (IS_ERR(vmur_class)) {
- rc = PTR_ERR(vmur_class);
- goto fail_unregister_region;
- }
pr_info("%s loaded.\n", ur_banner);
return 0;
-fail_unregister_region:
- unregister_chrdev_region(ur_first_dev_maj_min, NUM_MINORS);
fail_unregister_driver:
ccw_driver_unregister(&ur_driver);
+fail_class_destroy:
+ class_destroy(vmur_class);
fail_free_dbf:
debug_unregister(vmur_dbf);
return rc;
static void __exit ur_exit(void)
{
- class_destroy(vmur_class);
unregister_chrdev_region(ur_first_dev_maj_min, NUM_MINORS);
ccw_driver_unregister(&ur_driver);
+ class_destroy(vmur_class);
debug_unregister(vmur_dbf);
pr_info("%s unloaded.\n", ur_banner);
}
u32 num_pages;
u32 pad1;
u64 tod;
- cpuid_t cpu_id;
+ struct cpuid cpu_id;
u32 arch_id;
u32 volnr;
u32 build_arch;
# Makefile for the S/390 common i/o drivers
#
-obj-y += airq.o blacklist.o chsc.o cio.o css.o chp.o idset.o isc.o scsw.o \
+obj-y += airq.o blacklist.o chsc.o cio.o css.o chp.o idset.o isc.o \
fcx.o itcw.o crw.o
ccw_device-objs += device.o device_fsm.o device_ops.o
ccw_device-objs += device_id.o device_pgid.o device_status.o
if (ret) {
CIO_MSG_EVENT(0, "Could not register chp%x.%02x: %d\n",
chpid.cssid, chpid.id, ret);
- goto out_free;
+ put_device(&chp->dev);
+ goto out;
}
ret = sysfs_create_group(&chp->dev.kobj, &chp_attr_group);
if (ret) {
struct channel_path;
-struct css_general_char {
- u64 : 12;
- u32 dynio : 1; /* bit 12 */
- u32 : 28;
- u32 aif : 1; /* bit 41 */
- u32 : 3;
- u32 mcss : 1; /* bit 45 */
- u32 fcs : 1; /* bit 46 */
- u32 : 1;
- u32 ext_mb : 1; /* bit 48 */
- u32 : 7;
- u32 aif_tdd : 1; /* bit 56 */
- u32 : 1;
- u32 qebsm : 1; /* bit 58 */
- u32 : 8;
- u32 aif_osa : 1; /* bit 67 */
- u32 : 14;
- u32 cib : 1; /* bit 82 */
- u32 : 5;
- u32 fcx : 1; /* bit 88 */
- u32 : 7;
-}__attribute__((packed));
-
struct css_chsc_char {
u64 res;
u64 : 20;
u32 : 19;
}__attribute__((packed));
-extern struct css_general_char css_general_characteristics;
extern struct css_chsc_char css_chsc_characteristics;
struct chsc_ssd_info {
__u8 lpm, /* logical path mask */
__u8 key) /* storage key */
{
- char dbf_txt[15];
int ccode;
union orb *orb;
- CIO_TRACE_EVENT(4, "stIO");
- CIO_TRACE_EVENT(4, dev_name(&sch->dev));
+ CIO_TRACE_EVENT(5, "stIO");
+ CIO_TRACE_EVENT(5, dev_name(&sch->dev));
orb = &to_io_private(sch)->orb;
memset(orb, 0, sizeof(union orb));
ccode = ssch(sch->schid, orb);
/* process condition code */
- sprintf(dbf_txt, "ccode:%d", ccode);
- CIO_TRACE_EVENT(4, dbf_txt);
+ CIO_HEX_EVENT(5, &ccode, sizeof(ccode));
switch (ccode) {
case 0:
int
cio_resume (struct subchannel *sch)
{
- char dbf_txt[15];
int ccode;
- CIO_TRACE_EVENT (4, "resIO");
+ CIO_TRACE_EVENT(4, "resIO");
CIO_TRACE_EVENT(4, dev_name(&sch->dev));
ccode = rsch (sch->schid);
- sprintf (dbf_txt, "ccode:%d", ccode);
- CIO_TRACE_EVENT (4, dbf_txt);
+ CIO_HEX_EVENT(4, &ccode, sizeof(ccode));
switch (ccode) {
case 0:
int
cio_halt(struct subchannel *sch)
{
- char dbf_txt[15];
int ccode;
if (!sch)
return -ENODEV;
- CIO_TRACE_EVENT (2, "haltIO");
+ CIO_TRACE_EVENT(2, "haltIO");
CIO_TRACE_EVENT(2, dev_name(&sch->dev));
/*
*/
ccode = hsch (sch->schid);
- sprintf (dbf_txt, "ccode:%d", ccode);
- CIO_TRACE_EVENT (2, dbf_txt);
+ CIO_HEX_EVENT(2, &ccode, sizeof(ccode));
switch (ccode) {
case 0:
int
cio_clear(struct subchannel *sch)
{
- char dbf_txt[15];
int ccode;
if (!sch)
return -ENODEV;
- CIO_TRACE_EVENT (2, "clearIO");
+ CIO_TRACE_EVENT(2, "clearIO");
CIO_TRACE_EVENT(2, dev_name(&sch->dev));
/*
*/
ccode = csch (sch->schid);
- sprintf (dbf_txt, "ccode:%d", ccode);
- CIO_TRACE_EVENT (2, dbf_txt);
+ CIO_HEX_EVENT(2, &ccode, sizeof(ccode));
switch (ccode) {
case 0:
int
cio_cancel (struct subchannel *sch)
{
- char dbf_txt[15];
int ccode;
if (!sch)
return -ENODEV;
- CIO_TRACE_EVENT (2, "cancelIO");
+ CIO_TRACE_EVENT(2, "cancelIO");
CIO_TRACE_EVENT(2, dev_name(&sch->dev));
ccode = xsch (sch->schid);
- sprintf (dbf_txt, "ccode:%d", ccode);
- CIO_TRACE_EVENT (2, dbf_txt);
+ CIO_HEX_EVENT(2, &ccode, sizeof(ccode));
switch (ccode) {
case 0: /* success */
*/
int cio_enable_subchannel(struct subchannel *sch, u32 intparm)
{
- char dbf_txt[15];
int retry;
int ret;
- CIO_TRACE_EVENT (2, "ensch");
+ CIO_TRACE_EVENT(2, "ensch");
CIO_TRACE_EVENT(2, dev_name(&sch->dev));
if (sch_is_pseudo_sch(sch))
} else
break;
}
- sprintf (dbf_txt, "ret:%d", ret);
- CIO_TRACE_EVENT (2, dbf_txt);
+ CIO_HEX_EVENT(2, &ret, sizeof(ret));
return ret;
}
EXPORT_SYMBOL_GPL(cio_enable_subchannel);
*/
int cio_disable_subchannel(struct subchannel *sch)
{
- char dbf_txt[15];
int retry;
int ret;
- CIO_TRACE_EVENT (2, "dissch");
+ CIO_TRACE_EVENT(2, "dissch");
CIO_TRACE_EVENT(2, dev_name(&sch->dev));
if (sch_is_pseudo_sch(sch))
} else
break;
}
- sprintf (dbf_txt, "ret:%d", ret);
- CIO_TRACE_EVENT (2, dbf_txt);
+ CIO_HEX_EVENT(2, &ret, sizeof(ret));
return ret;
}
EXPORT_SYMBOL_GPL(cio_disable_subchannel);
goto out;
}
mutex_init(&sch->reg_mutex);
- /* Set a name for the subchannel */
- if (cio_is_console(schid))
- sch->dev.init_name = cio_get_console_sch_name(schid);
- else
- dev_set_name(&sch->dev, "0.%x.%04x", schid.ssid, schid.sch_no);
/*
* The first subchannel that is not-operational (ccode==3)
#ifdef CONFIG_CCW_CONSOLE
static struct subchannel console_subchannel;
-static char console_sch_name[10] = "0.x.xxxx";
static struct io_subchannel_private console_priv;
static int console_subchannel_in_use;
return &console_subchannel;
}
-const char *cio_get_console_sch_name(struct subchannel_id schid)
-{
- snprintf(console_sch_name, 10, "0.%x.%04x", schid.ssid, schid.sch_no);
- return (const char *)console_sch_name;
-}
-
#endif
static int
__disable_subchannel_easy(struct subchannel_id schid, struct schib *schib)
extern struct subchannel *cio_get_console_subchannel(void);
extern spinlock_t * cio_get_console_lock(void);
extern void *cio_get_console_priv(void);
-extern const char *cio_get_console_sch_name(struct subchannel_id schid);
-extern const char *cio_get_console_cdev_name(struct subchannel *sch);
#else
#define cio_is_console(schid) 0
#define cio_get_console_subchannel() NULL
#define cio_get_console_lock() NULL
#define cio_get_console_priv() NULL
-#define cio_get_console_sch_name(schid) NULL
-#define cio_get_console_cdev_name(sch) NULL
#endif
#endif
return sch;
}
-static void
-css_free_subchannel(struct subchannel *sch)
-{
- if (sch) {
- /* Reset intparm to zeroes. */
- sch->config.intparm = 0;
- cio_commit_config(sch);
- kfree(sch->lock);
- kfree(sch);
- }
-}
-
static void
css_subchannel_release(struct device *dev)
{
sch = to_subchannel(dev);
if (!cio_is_console(sch->schid)) {
+ /* Reset intparm to zeroes. */
+ sch->config.intparm = 0;
+ cio_commit_config(sch);
kfree(sch->lock);
kfree(sch);
}
int ret;
mutex_lock(&sch->reg_mutex);
+ dev_set_name(&sch->dev, "0.%x.%04x", sch->schid.ssid,
+ sch->schid.sch_no);
ret = device_register(&sch->dev);
mutex_unlock(&sch->reg_mutex);
return ret;
return PTR_ERR(sch);
ret = css_register_subchannel(sch);
if (ret)
- css_free_subchannel(sch);
+ put_device(&sch->dev);
return ret;
}
* not working) so we do it now. This is true e.g. for the
* console subchannel.
*/
- css_register_subchannel(sch);
+ if (css_register_subchannel(sch)) {
+ if (!cio_is_console(schid))
+ put_device(&sch->dev);
+ }
return 0;
}
css->global_pgid.pgid_high.cpu_addr = 0;
#endif
}
- css->global_pgid.cpu_id = ((cpuid_t *) __LC_CPUID)->ident;
- css->global_pgid.cpu_model = ((cpuid_t *) __LC_CPUID)->machine;
+ css->global_pgid.cpu_id = S390_lowcore.cpu_id.ident;
+ css->global_pgid.cpu_model = S390_lowcore.cpu_id.machine;
css->global_pgid.tod_high = tod_high;
}
goto out_device;
}
ret = device_register(&css->pseudo_subchannel->dev);
- if (ret)
+ if (ret) {
+ put_device(&css->pseudo_subchannel->dev);
goto out_file;
+ }
}
ret = register_reboot_notifier(&css_reboot_notifier);
if (ret)
static void ccw_device_unregister(struct ccw_device *cdev)
{
- if (test_and_clear_bit(1, &cdev->private->registered))
+ if (test_and_clear_bit(1, &cdev->private->registered)) {
device_del(&cdev->dev);
+ /* Release reference from device_initialize(). */
+ put_device(&cdev->dev);
+ }
}
static void ccw_device_remove_orphan_cb(struct work_struct *work)
priv = container_of(work, struct ccw_device_private, kick_work);
cdev = priv->cdev;
ccw_device_unregister(cdev);
- put_device(&cdev->dev);
/* Release cdev reference for workqueue processing. */
put_device(&cdev->dev);
}
* Forced offline in disconnected state means
* 'throw away device'.
*/
- /* Get cdev reference for workqueue processing. */
- if (!get_device(&cdev->dev))
- return;
if (ccw_device_is_orphan(cdev)) {
/*
* Deregister ccw device.
* Unfortunately, we cannot do this directly from the
* attribute method.
*/
+ /* Get cdev reference for workqueue processing. */
+ if (!get_device(&cdev->dev))
+ return;
spin_lock_irqsave(cdev->ccwlock, flags);
cdev->private->state = DEV_STATE_NOT_OPER;
spin_unlock_irqrestore(cdev->ccwlock, flags);
}
cdev->online = 0;
spin_lock_irq(cdev->ccwlock);
- ret = ccw_device_offline(cdev);
- if (ret == -ENODEV) {
- if (cdev->private->state != DEV_STATE_NOT_OPER) {
- cdev->private->state = DEV_STATE_OFFLINE;
- dev_fsm_event(cdev, DEV_EVENT_NOTOPER);
- }
+ /* Wait until a final state or DISCONNECTED is reached */
+ while (!dev_fsm_final_state(cdev) &&
+ cdev->private->state != DEV_STATE_DISCONNECTED) {
spin_unlock_irq(cdev->ccwlock);
- /* Give up reference from ccw_device_set_online(). */
- put_device(&cdev->dev);
- return ret;
+ wait_event(cdev->private->wait_q, (dev_fsm_final_state(cdev) ||
+ cdev->private->state == DEV_STATE_DISCONNECTED));
+ spin_lock_irq(cdev->ccwlock);
}
+ ret = ccw_device_offline(cdev);
+ if (ret)
+ goto error;
spin_unlock_irq(cdev->ccwlock);
- if (ret == 0) {
- wait_event(cdev->private->wait_q, dev_fsm_final_state(cdev));
- /* Give up reference from ccw_device_set_online(). */
- put_device(&cdev->dev);
- } else {
- CIO_MSG_EVENT(0, "ccw_device_offline returned %d, "
- "device 0.%x.%04x\n",
- ret, cdev->private->dev_id.ssid,
- cdev->private->dev_id.devno);
- cdev->online = 1;
- }
- return ret;
+ wait_event(cdev->private->wait_q, (dev_fsm_final_state(cdev) ||
+ cdev->private->state == DEV_STATE_DISCONNECTED));
+ /* Give up reference from ccw_device_set_online(). */
+ put_device(&cdev->dev);
+ return 0;
+
+error:
+ CIO_MSG_EVENT(0, "ccw_device_offline returned %d, device 0.%x.%04x\n",
+ ret, cdev->private->dev_id.ssid,
+ cdev->private->dev_id.devno);
+ cdev->private->state = DEV_STATE_OFFLINE;
+ dev_fsm_event(cdev, DEV_EVENT_NOTOPER);
+ spin_unlock_irq(cdev->ccwlock);
+ /* Give up reference from ccw_device_set_online(). */
+ put_device(&cdev->dev);
+ return -ENODEV;
}
/**
int ccw_device_set_online(struct ccw_device *cdev)
{
int ret;
+ int ret2;
if (!cdev)
return -ENODEV;
put_device(&cdev->dev);
return ret;
}
- if (cdev->private->state != DEV_STATE_ONLINE) {
+ spin_lock_irq(cdev->ccwlock);
+ /* Check if online processing was successful */
+ if ((cdev->private->state != DEV_STATE_ONLINE) &&
+ (cdev->private->state != DEV_STATE_W4SENSE)) {
+ spin_unlock_irq(cdev->ccwlock);
/* Give up online reference since onlining failed. */
put_device(&cdev->dev);
return -ENODEV;
}
- if (!cdev->drv->set_online || cdev->drv->set_online(cdev) == 0) {
- cdev->online = 1;
- return 0;
- }
+ spin_unlock_irq(cdev->ccwlock);
+ if (cdev->drv->set_online)
+ ret = cdev->drv->set_online(cdev);
+ if (ret)
+ goto rollback;
+ cdev->online = 1;
+ return 0;
+
+rollback:
spin_lock_irq(cdev->ccwlock);
- ret = ccw_device_offline(cdev);
+ /* Wait until a final state or DISCONNECTED is reached */
+ while (!dev_fsm_final_state(cdev) &&
+ cdev->private->state != DEV_STATE_DISCONNECTED) {
+ spin_unlock_irq(cdev->ccwlock);
+ wait_event(cdev->private->wait_q, (dev_fsm_final_state(cdev) ||
+ cdev->private->state == DEV_STATE_DISCONNECTED));
+ spin_lock_irq(cdev->ccwlock);
+ }
+ ret2 = ccw_device_offline(cdev);
+ if (ret2)
+ goto error;
+ spin_unlock_irq(cdev->ccwlock);
+ wait_event(cdev->private->wait_q, (dev_fsm_final_state(cdev) ||
+ cdev->private->state == DEV_STATE_DISCONNECTED));
+ /* Give up online reference since onlining failed. */
+ put_device(&cdev->dev);
+ return ret;
+
+error:
+ CIO_MSG_EVENT(0, "rollback ccw_device_offline returned %d, "
+ "device 0.%x.%04x\n",
+ ret2, cdev->private->dev_id.ssid,
+ cdev->private->dev_id.devno);
+ cdev->private->state = DEV_STATE_OFFLINE;
spin_unlock_irq(cdev->ccwlock);
- if (ret == 0)
- wait_event(cdev->private->wait_q, dev_fsm_final_state(cdev));
- else
- CIO_MSG_EVENT(0, "ccw_device_offline returned %d, "
- "device 0.%x.%04x\n",
- ret, cdev->private->dev_id.ssid,
- cdev->private->dev_id.devno);
/* Give up online reference since onlining failed. */
put_device(&cdev->dev);
- return (ret == 0) ? -ENODEV : ret;
+ return ret;
}
static int online_store_handle_offline(struct ccw_device *cdev)
int ret;
dev->bus = &ccw_bus_type;
-
- if ((ret = device_add(dev)))
+ ret = dev_set_name(&cdev->dev, "0.%x.%04x", cdev->private->dev_id.ssid,
+ cdev->private->dev_id.devno);
+ if (ret)
+ return ret;
+ ret = device_add(dev);
+ if (ret)
return ret;
set_bit(1, &cdev->private->registered);
cdev = io_subchannel_allocate_dev(sch);
if (!IS_ERR(cdev)) {
ret = io_subchannel_initialize_dev(sch, cdev);
- if (ret) {
- kfree(cdev);
+ if (ret)
cdev = ERR_PTR(ret);
- }
}
return cdev;
}
return;
sch = to_subchannel(cdev->dev.parent);
css_sch_device_unregister(sch);
- /* Reset intparm to zeroes. */
- sch->config.intparm = 0;
- cio_commit_config(sch);
/* Release cdev reference for workqueue processing.*/
put_device(&cdev->dev);
/* Release subchannel reference for local processing. */
void ccw_device_schedule_sch_unregister(struct ccw_device *cdev)
{
+ /* Get cdev reference for workqueue processing. */
+ if (!get_device(&cdev->dev))
+ return;
PREPARE_WORK(&cdev->private->kick_work,
ccw_device_call_sch_unregister);
queue_work(slow_path_wq, &cdev->private->kick_work);
/* Device did not respond in time. */
case DEV_STATE_NOT_OPER:
cdev->private->flags.recog_done = 1;
- /* Remove device found not operational. */
- if (!get_device(&cdev->dev))
- break;
ccw_device_schedule_sch_unregister(cdev);
if (atomic_dec_and_test(&ccw_device_init_count))
wake_up(&ccw_device_init_wq);
init_waitqueue_head(&priv->wait_q);
init_timer(&priv->timer);
- /* Set an initial name for the device. */
- if (cio_is_console(sch->schid))
- cdev->dev.init_name = cio_get_console_cdev_name(sch);
- else
- dev_set_name(&cdev->dev, "0.%x.%04x",
- sch->schid.ssid, sch->schib.pmcw.dev);
-
/* Increase counter of devices currently in recognition. */
atomic_inc(&ccw_device_init_count);
cdev = sch_get_cdev(sch);
- CIO_TRACE_EVENT(3, "IRQ");
- CIO_TRACE_EVENT(3, dev_name(&sch->dev));
+ CIO_TRACE_EVENT(6, "IRQ");
+ CIO_TRACE_EVENT(6, dev_name(&sch->dev));
if (cdev)
dev_fsm_event(cdev, DEV_EVENT_INTERRUPT);
}
sch = container_of(work, struct subchannel, work);
css_sch_device_unregister(sch);
- /* Reset intparm to zeroes. */
- sch->config.intparm = 0;
- cio_commit_config(sch);
put_device(&sch->dev);
}
cdev->private->state = DEV_STATE_NOT_OPER;
spin_unlock_irqrestore(cdev->ccwlock, flags);
ccw_device_unregister(cdev);
- put_device(&cdev->dev);
kfree(sch->private);
sysfs_remove_group(&sch->dev.kobj, &io_subchannel_attr_group);
return 0;
spin_unlock_irq(cdev->ccwlock);
if (!unreg)
goto out;
- if (!get_device(&cdev->dev))
- goto out;
CIO_MSG_EVENT(3, "ccw: purging 0.%x.%04x\n", priv->dev_id.ssid,
priv->dev_id.devno);
ccw_device_schedule_sch_unregister(cdev);
spin_unlock_irqrestore(sch->lock, flags);
css_sch_device_unregister(sch);
spin_lock_irqsave(sch->lock, flags);
-
- /* Reset intparm to zeroes. */
- sch->config.intparm = 0;
- cio_commit_config(sch);
break;
case REPROBE:
ccw_device_trigger_reprobe(cdev);
#ifdef CONFIG_CCW_CONSOLE
static struct ccw_device console_cdev;
-static char console_cdev_name[10] = "0.x.xxxx";
static struct ccw_device_private console_private;
static int console_cdev_in_use;
return ccw_device_pm_restore(&console_cdev.dev);
}
EXPORT_SYMBOL_GPL(ccw_device_force_console);
-
-const char *cio_get_console_cdev_name(struct subchannel *sch)
-{
- snprintf(console_cdev_name, 10, "0.%x.%04x",
- sch->schid.ssid, sch->schib.pmcw.dev);
- return (const char *)console_cdev_name;
-}
#endif
/*
spin_unlock_irq(sch->lock);
if (ret) {
CIO_MSG_EVENT(0, "Couldn't start recognition for device "
- "%s (ret=%d)\n", dev_name(&cdev->dev), ret);
+ "0.%x.%04x (ret=%d)\n",
+ cdev->private->dev_id.ssid,
+ cdev->private->dev_id.devno, ret);
spin_lock_irq(sch->lock);
cdev->private->state = DEV_STATE_DISCONNECTED;
spin_unlock_irq(sch->lock);
}
/* check if the device id has changed */
if (sch->schib.pmcw.dev != cdev->private->dev_id.devno) {
- CIO_MSG_EVENT(0, "resume: sch %s: failed (devno changed from "
- "%04x to %04x)\n", dev_name(&sch->dev),
+ CIO_MSG_EVENT(0, "resume: sch 0.%x.%04x: failed (devno "
+ "changed from %04x to %04x)\n",
+ sch->schid.ssid, sch->schid.sch_no,
cdev->private->dev_id.devno,
sch->schib.pmcw.dev);
goto out_unreg_unlock;
if (cm_enabled) {
ret = ccw_set_cmf(cdev, 1);
if (ret) {
- CIO_MSG_EVENT(2, "resume: cdev %s: cmf failed "
- "(rc=%d)\n", dev_name(&cdev->dev), ret);
+ CIO_MSG_EVENT(2, "resume: cdev 0.%x.%04x: cmf failed "
+ "(rc=%d)\n", cdev->private->dev_id.ssid,
+ cdev->private->dev_id.devno, ret);
ret = 0;
}
}
ccw_device_schedule_sch_unregister(cdev);
cdev->private->flags.donotify = 0;
}
+ if (state == DEV_STATE_NOT_OPER) {
+ CIO_MSG_EVENT(0, "Device %04x gone on subchannel %04x\n",
+ cdev->private->dev_id.devno, sch->schid.sch_no);
+ if (!ccw_device_notify(cdev, CIO_GONE))
+ ccw_device_schedule_sch_unregister(cdev);
+ cdev->private->flags.donotify = 0;
+ }
if (cdev->private->flags.donotify) {
cdev->private->flags.donotify = 0;
css_schedule_eval(sch->schid);
}
+/*
+ * Handle path verification event in offline state.
+ */
+static void ccw_device_offline_verify(struct ccw_device *cdev,
+ enum dev_event dev_event)
+{
+ struct subchannel *sch = to_subchannel(cdev->dev.parent);
+
+ css_schedule_eval(sch->schid);
+}
+
/*
* Handle path verification event.
*/
}
call_handler:
cdev->private->state = DEV_STATE_ONLINE;
+ /* In case sensing interfered with setting the device online */
+ wake_up(&cdev->private->wait_q);
/* Call the handler. */
if (ccw_device_call_handler(cdev) && cdev->private->flags.doverify)
/* Start delayed path verification. */
[DEV_EVENT_NOTOPER] = ccw_device_generic_notoper,
[DEV_EVENT_INTERRUPT] = ccw_device_offline_irq,
[DEV_EVENT_TIMEOUT] = ccw_device_nop,
- [DEV_EVENT_VERIFY] = ccw_device_nop,
+ [DEV_EVENT_VERIFY] = ccw_device_offline_verify,
},
[DEV_STATE_VERIFY] = {
[DEV_EVENT_NOTOPER] = ccw_device_generic_notoper,
/*
* linux/drivers/s390/cio/qdio.h
*
- * Copyright 2000,2008 IBM Corp.
+ * Copyright 2000,2009 IBM Corp.
* Author(s): Utz Bacher <utz.bacher@de.ibm.com>
* Jan Glauber <jang@linux.vnet.ibm.com>
*/
atomic_t nr_buf_used;
struct qdio_irq *irq_ptr;
+ struct dentry *debugfs_q;
struct tasklet_struct tasklet;
/* error condition during a data transfer */
struct qib qib;
u32 *dsci; /* address of device state change indicator */
struct ccw_device *cdev;
+ struct dentry *debugfs_dev;
unsigned long int_parm;
struct subchannel_id schid;
/*
* drivers/s390/cio/qdio_debug.c
*
- * Copyright IBM Corp. 2008
+ * Copyright IBM Corp. 2008,2009
*
* Author: Jan Glauber (jang@linux.vnet.ibm.com)
*/
-#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/debugfs.h>
-#include <asm/qdio.h>
#include <asm/debug.h>
#include "qdio_debug.h"
#include "qdio.h"
debug_info_t *qdio_dbf_error;
static struct dentry *debugfs_root;
-#define MAX_DEBUGFS_QUEUES 32
-static struct dentry *debugfs_queues[MAX_DEBUGFS_QUEUES] = { NULL };
-static DEFINE_MUTEX(debugfs_mutex);
-#define QDIO_DEBUGFS_NAME_LEN 40
+#define QDIO_DEBUGFS_NAME_LEN 10
void qdio_allocate_dbf(struct qdio_initialize *init_data,
struct qdio_irq *irq_ptr)
filp->f_path.dentry->d_inode->i_private);
}
-static void remove_debugfs_entry(struct qdio_q *q)
-{
- int i;
-
- for (i = 0; i < MAX_DEBUGFS_QUEUES; i++) {
- if (!debugfs_queues[i])
- continue;
- if (debugfs_queues[i]->d_inode->i_private == q) {
- debugfs_remove(debugfs_queues[i]);
- debugfs_queues[i] = NULL;
- }
- }
-}
-
static struct file_operations debugfs_fops = {
.owner = THIS_MODULE,
.open = qstat_seq_open,
static void setup_debugfs_entry(struct qdio_q *q, struct ccw_device *cdev)
{
- int i = 0;
char name[QDIO_DEBUGFS_NAME_LEN];
- while (debugfs_queues[i] != NULL) {
- i++;
- if (i >= MAX_DEBUGFS_QUEUES)
- return;
- }
- snprintf(name, QDIO_DEBUGFS_NAME_LEN, "%s_%s_%d",
- dev_name(&cdev->dev),
+ snprintf(name, QDIO_DEBUGFS_NAME_LEN, "%s_%d",
q->is_input_q ? "input" : "output",
q->nr);
- debugfs_queues[i] = debugfs_create_file(name, S_IFREG | S_IRUGO | S_IWUSR,
- debugfs_root, q, &debugfs_fops);
- if (IS_ERR(debugfs_queues[i]))
- debugfs_queues[i] = NULL;
+ q->debugfs_q = debugfs_create_file(name, S_IFREG | S_IRUGO | S_IWUSR,
+ q->irq_ptr->debugfs_dev, q, &debugfs_fops);
+ if (IS_ERR(q->debugfs_q))
+ q->debugfs_q = NULL;
}
void qdio_setup_debug_entries(struct qdio_irq *irq_ptr, struct ccw_device *cdev)
struct qdio_q *q;
int i;
- mutex_lock(&debugfs_mutex);
+ irq_ptr->debugfs_dev = debugfs_create_dir(dev_name(&cdev->dev),
+ debugfs_root);
+ if (IS_ERR(irq_ptr->debugfs_dev))
+ irq_ptr->debugfs_dev = NULL;
for_each_input_queue(irq_ptr, q, i)
setup_debugfs_entry(q, cdev);
for_each_output_queue(irq_ptr, q, i)
setup_debugfs_entry(q, cdev);
- mutex_unlock(&debugfs_mutex);
}
void qdio_shutdown_debug_entries(struct qdio_irq *irq_ptr, struct ccw_device *cdev)
struct qdio_q *q;
int i;
- mutex_lock(&debugfs_mutex);
for_each_input_queue(irq_ptr, q, i)
- remove_debugfs_entry(q);
+ debugfs_remove(q->debugfs_q);
for_each_output_queue(irq_ptr, q, i)
- remove_debugfs_entry(q);
- mutex_unlock(&debugfs_mutex);
+ debugfs_remove(q->debugfs_q);
+ debugfs_remove(irq_ptr->debugfs_dev);
}
int __init qdio_debug_init(void)
{
- debugfs_root = debugfs_create_dir("qdio_queues", NULL);
+ debugfs_root = debugfs_create_dir("qdio", NULL);
qdio_dbf_setup = debug_register("qdio_setup", 16, 1, 16);
debug_register_view(qdio_dbf_setup, &debug_hex_ascii_view);
if (!qdio_inbound_q_done(q)) {
qdio_perf_stat_inc(&perf_stats.thinint_inbound_loop);
- if (likely(q->irq_ptr->state != QDIO_IRQ_STATE_STOPPED))
+ if (likely(q->irq_ptr->state != QDIO_IRQ_STATE_STOPPED)) {
tasklet_schedule(&q->tasklet);
+ return;
+ }
}
qdio_stop_polling(q);
/* Poll on the device until all requests are finished. */
do {
flags = 0;
+ spin_lock_bh(&ap_dev->lock);
__ap_poll_device(ap_dev, &flags);
+ spin_unlock_bh(&ap_dev->lock);
} while ((flags & 1) || (flags & 2));
ap_device_remove(dev);
ap_dev->device.bus = &ap_bus_type;
ap_dev->device.parent = ap_root_device;
- dev_set_name(&ap_dev->device, "card%02x",
- AP_QID_DEVICE(ap_dev->qid));
+ if (dev_set_name(&ap_dev->device, "card%02x",
+ AP_QID_DEVICE(ap_dev->qid))) {
+ kfree(ap_dev);
+ continue;
+ }
ap_dev->device.release = ap_device_release;
rc = device_register(&ap_dev->device);
if (rc) {
- kfree(ap_dev);
+ put_device(&ap_dev->device);
continue;
}
/* Add device attributes. */
*/
static inline void ap_schedule_poll_timer(void)
{
+ ktime_t hr_time;
if (ap_using_interrupts() || ap_suspend_flag)
return;
if (hrtimer_is_queued(&ap_poll_timer))
return;
- hrtimer_start(&ap_poll_timer, ktime_set(0, poll_timeout),
- HRTIMER_MODE_ABS);
+ if (ktime_to_ns(hrtimer_expires_remaining(&ap_poll_timer)) <= 0) {
+ hr_time = ktime_set(0, poll_timeout);
+ hrtimer_forward_now(&ap_poll_timer, hr_time);
+ hrtimer_restart(&ap_poll_timer);
+ }
+ return;
}
/**
static int __ap_poll_device(struct ap_device *ap_dev, unsigned long *flags)
{
- spin_lock(&ap_dev->lock);
if (!ap_dev->unregistered) {
if (ap_poll_queue(ap_dev, flags))
ap_dev->unregistered = 1;
if (ap_dev->reset == AP_RESET_DO)
ap_reset(ap_dev);
}
- spin_unlock(&ap_dev->lock);
return 0;
}
flags = 0;
spin_lock(&ap_device_list_lock);
list_for_each_entry(ap_dev, &ap_device_list, list) {
+ spin_lock(&ap_dev->lock);
__ap_poll_device(ap_dev, &flags);
+ spin_unlock(&ap_dev->lock);
}
spin_unlock(&ap_device_list_lock);
} while (flags & 1);
flags = 0;
spin_lock_bh(&ap_device_list_lock);
list_for_each_entry(ap_dev, &ap_device_list, list) {
+ spin_lock(&ap_dev->lock);
__ap_poll_device(ap_dev, &flags);
+ spin_unlock(&ap_dev->lock);
}
spin_unlock_bh(&ap_device_list_lock);
}
return len;
}
-void __init s390_virtio_console_init(void)
+static int __init s390_virtio_console_init(void)
{
- virtio_cons_early_init(early_put_chars);
+ if (!MACHINE_IS_KVM)
+ return -ENODEV;
+ return virtio_cons_early_init(early_put_chars);
}
+console_initcall(s390_virtio_console_init);
+
/*
* We do this after core stuff, but before the drivers.
return -ENOMEM;
ret = device_register(dev);
-
- if (ret)
+ if (ret) {
+ put_device(dev);
return ret;
+ }
ret = netiucv_add_files(dev);
if (ret)
goto out_unreg;
netiucv_dev->release = (void (*)(struct device *))kfree;
netiucv_dev->driver = &netiucv_driver;
rc = device_register(netiucv_dev);
- if (rc)
+ if (rc) {
+ put_device(netiucv_dev);
goto out_driver;
+ }
netiucv_banner();
return rc;
smsg_dev->driver = &smsg_driver;
rc = device_register(smsg_dev);
if (rc)
- goto out_free_dev;
+ goto out_put;
cpcmd("SET SMSG IUCV", NULL, 0, NULL);
return 0;
-out_free_dev:
- kfree(smsg_dev);
+out_put:
+ put_device(smsg_dev);
out_free_path:
iucv_path_free(smsg_path);
smsg_path = NULL;
_zfcp_erp_unit_reopen(unit, clear, id, ref);
}
-static void zfcp_erp_strategy_followup_actions(struct zfcp_erp_action *act)
+static void zfcp_erp_strategy_followup_failed(struct zfcp_erp_action *act)
{
- struct zfcp_adapter *adapter = act->adapter;
- struct zfcp_port *port = act->port;
- struct zfcp_unit *unit = act->unit;
- u32 status = act->status;
-
- /* initiate follow-up actions depending on success of finished action */
switch (act->action) {
-
case ZFCP_ERP_ACTION_REOPEN_ADAPTER:
- if (status == ZFCP_ERP_SUCCEEDED)
- _zfcp_erp_port_reopen_all(adapter, 0, "ersfa_1", NULL);
- else
- _zfcp_erp_adapter_reopen(adapter, 0, "ersfa_2", NULL);
+ _zfcp_erp_adapter_reopen(act->adapter, 0, "ersff_1", NULL);
break;
-
case ZFCP_ERP_ACTION_REOPEN_PORT_FORCED:
- if (status == ZFCP_ERP_SUCCEEDED)
- _zfcp_erp_port_reopen(port, 0, "ersfa_3", NULL);
- else
- _zfcp_erp_adapter_reopen(adapter, 0, "ersfa_4", NULL);
+ _zfcp_erp_port_forced_reopen(act->port, 0, "ersff_2", NULL);
break;
-
case ZFCP_ERP_ACTION_REOPEN_PORT:
- if (status == ZFCP_ERP_SUCCEEDED)
- _zfcp_erp_unit_reopen_all(port, 0, "ersfa_5", NULL);
- else
- _zfcp_erp_port_forced_reopen(port, 0, "ersfa_6", NULL);
+ _zfcp_erp_port_reopen(act->port, 0, "ersff_3", NULL);
break;
-
case ZFCP_ERP_ACTION_REOPEN_UNIT:
- if (status != ZFCP_ERP_SUCCEEDED)
- _zfcp_erp_port_reopen(unit->port, 0, "ersfa_7", NULL);
+ _zfcp_erp_unit_reopen(act->unit, 0, "ersff_4", NULL);
+ break;
+ }
+}
+
+static void zfcp_erp_strategy_followup_success(struct zfcp_erp_action *act)
+{
+ switch (act->action) {
+ case ZFCP_ERP_ACTION_REOPEN_ADAPTER:
+ _zfcp_erp_port_reopen_all(act->adapter, 0, "ersfs_1", NULL);
+ break;
+ case ZFCP_ERP_ACTION_REOPEN_PORT_FORCED:
+ _zfcp_erp_port_reopen(act->port, 0, "ersfs_2", NULL);
+ break;
+ case ZFCP_ERP_ACTION_REOPEN_PORT:
+ _zfcp_erp_unit_reopen_all(act->port, 0, "ersfs_3", NULL);
break;
}
}
return ZFCP_ERP_FAILED;
case ZFCP_ERP_STEP_PHYS_PORT_CLOSING:
- if (status & ZFCP_STATUS_PORT_PHYS_OPEN)
+ if (!(status & ZFCP_STATUS_PORT_PHYS_OPEN))
return ZFCP_ERP_SUCCEEDED;
}
return ZFCP_ERP_FAILED;
gid_pn_work);
retval = zfcp_fc_ns_gid_pn(&port->erp_action);
- if (retval == -ENOMEM)
- zfcp_erp_notify(&port->erp_action, ZFCP_ERP_NOMEM);
- port->erp_action.step = ZFCP_ERP_STEP_NAMESERVER_LOOKUP;
- if (retval)
- zfcp_erp_notify(&port->erp_action, ZFCP_ERP_FAILED);
+ if (!retval) {
+ port->erp_action.step = ZFCP_ERP_STEP_NAMESERVER_LOOKUP;
+ goto out;
+ }
+ if (retval == -ENOMEM) {
+ zfcp_erp_notify(&port->erp_action, ZFCP_STATUS_ERP_LOWMEM);
+ goto out;
+ }
+ /* all other error condtions */
+ zfcp_erp_notify(&port->erp_action, 0);
+out:
zfcp_port_put(port);
}
retval = zfcp_erp_strategy_statechange(erp_action, retval);
if (retval == ZFCP_ERP_EXIT)
goto unlock;
- zfcp_erp_strategy_followup_actions(erp_action);
+ if (retval == ZFCP_ERP_SUCCEEDED)
+ zfcp_erp_strategy_followup_success(erp_action);
+ if (retval == ZFCP_ERP_FAILED)
+ zfcp_erp_strategy_followup_failed(erp_action);
unlock:
write_unlock(&adapter->erp_lock);
mutex_unlock(&wka_port->mutex);
- wait_event_timeout(
- wka_port->completion_wq,
- wka_port->status == ZFCP_WKA_PORT_ONLINE ||
- wka_port->status == ZFCP_WKA_PORT_OFFLINE,
- HZ >> 1);
+ wait_event(wka_port->completion_wq,
+ wka_port->status == ZFCP_WKA_PORT_ONLINE ||
+ wka_port->status == ZFCP_WKA_PORT_OFFLINE);
if (wka_port->status == ZFCP_WKA_PORT_ONLINE) {
atomic_inc(&wka_port->refcount);
zfcp_fsf_sbal_check(adapter), 5 * HZ);
if (ret > 0)
return 0;
- if (!ret)
+ if (!ret) {
atomic_inc(&adapter->qdio_outb_full);
+ /* assume hanging outbound queue, try queue recovery */
+ zfcp_erp_adapter_reopen(adapter, 0, "fsrsg_1", NULL);
+ }
spin_lock_bh(&adapter->req_q_lock);
return -EIO;
req = zfcp_fsf_alloc_qtcb(pool);
if (unlikely(!req))
- return ERR_PTR(-EIO);
+ return ERR_PTR(-ENOMEM);
if (adapter->req_no == 0)
adapter->req_no++;
send_ct->handler(send_ct->handler_data);
}
+static void zfcp_fsf_setup_ct_els_unchained(struct qdio_buffer_element *sbale,
+ struct scatterlist *sg_req,
+ struct scatterlist *sg_resp)
+{
+ sbale[0].flags |= SBAL_FLAGS0_TYPE_WRITE_READ;
+ sbale[2].addr = sg_virt(sg_req);
+ sbale[2].length = sg_req->length;
+ sbale[3].addr = sg_virt(sg_resp);
+ sbale[3].length = sg_resp->length;
+ sbale[3].flags |= SBAL_FLAGS_LAST_ENTRY;
+}
+
+static int zfcp_fsf_one_sbal(struct scatterlist *sg)
+{
+ return sg_is_last(sg) && sg->length <= PAGE_SIZE;
+}
+
static int zfcp_fsf_setup_ct_els_sbals(struct zfcp_fsf_req *req,
struct scatterlist *sg_req,
struct scatterlist *sg_resp,
int bytes;
if (!(feat & FSF_FEATURE_ELS_CT_CHAINED_SBALS)) {
- if (sg_req->length > PAGE_SIZE || sg_resp->length > PAGE_SIZE ||
- !sg_is_last(sg_req) || !sg_is_last(sg_resp))
+ if (!zfcp_fsf_one_sbal(sg_req) || !zfcp_fsf_one_sbal(sg_resp))
return -EOPNOTSUPP;
- sbale[0].flags |= SBAL_FLAGS0_TYPE_WRITE_READ;
- sbale[2].addr = sg_virt(sg_req);
- sbale[2].length = sg_req->length;
- sbale[3].addr = sg_virt(sg_resp);
- sbale[3].length = sg_resp->length;
- sbale[3].flags |= SBAL_FLAGS_LAST_ENTRY;
+ zfcp_fsf_setup_ct_els_unchained(sbale, sg_req, sg_resp);
+ return 0;
+ }
+
+ /* use single, unchained SBAL if it can hold the request */
+ if (zfcp_fsf_one_sbal(sg_req) && zfcp_fsf_one_sbal(sg_resp)) {
+ zfcp_fsf_setup_ct_els_unchained(sbale, sg_req, sg_resp);
return 0;
}
bytes = zfcp_qdio_sbals_from_sg(req, SBAL_FLAGS0_TYPE_WRITE_READ,
sg_req, max_sbals);
if (bytes <= 0)
- return -ENOMEM;
+ return -EIO;
req->qtcb->bottom.support.req_buf_length = bytes;
req->sbale_curr = ZFCP_LAST_SBALE_PER_SBAL;
bytes = zfcp_qdio_sbals_from_sg(req, SBAL_FLAGS0_TYPE_WRITE_READ,
sg_resp, max_sbals);
if (bytes <= 0)
- return -ENOMEM;
+ return -EIO;
req->qtcb->bottom.support.resp_buf_length = bytes;
return 0;
case FSF_ACCESS_DENIED:
wka_port->status = ZFCP_WKA_PORT_OFFLINE;
break;
- case FSF_PORT_ALREADY_OPEN:
- break;
case FSF_GOOD:
wka_port->handle = header->port_handle;
+ /* fall through */
+ case FSF_PORT_ALREADY_OPEN:
wka_port->status = ZFCP_WKA_PORT_ONLINE;
}
out:
zfcp_fsf_access_denied_port(req, port);
break;
case FSF_PORT_BOXED:
- zfcp_erp_port_boxed(port, "fscpph2", req);
- req->status |= ZFCP_STATUS_FSFREQ_ERROR |
- ZFCP_STATUS_FSFREQ_RETRY;
/* can't use generic zfcp_erp_modify_port_status because
* ZFCP_STATUS_COMMON_OPEN must not be reset for the port */
atomic_clear_mask(ZFCP_STATUS_PORT_PHYS_OPEN, &port->status);
list_for_each_entry(unit, &port->unit_list_head, list)
atomic_clear_mask(ZFCP_STATUS_COMMON_OPEN,
&unit->status);
+ zfcp_erp_port_boxed(port, "fscpph2", req);
+ req->status |= ZFCP_STATUS_FSFREQ_ERROR |
+ ZFCP_STATUS_FSFREQ_RETRY;
+
break;
case FSF_ADAPTER_STATUS_AVAILABLE:
switch (header->fsf_status_qual.word[0]) {
bytes = zfcp_qdio_sbals_from_sg(req, direction, fsf_cfdc->sg,
FSF_MAX_SBALS_PER_REQ);
if (bytes != ZFCP_CFDC_MAX_SIZE) {
- retval = -ENOMEM;
zfcp_fsf_req_free(req);
goto out;
}
struct zfcp_unit *unit = scpnt->device->hostdata;
struct zfcp_fsf_req *old_req, *abrt_req;
unsigned long flags;
- unsigned long old_req_id = (unsigned long) scpnt->host_scribble;
+ unsigned long old_reqid = (unsigned long) scpnt->host_scribble;
int retval = SUCCESS;
int retry = 3;
+ char *dbf_tag;
/* avoid race condition between late normal completion and abort */
write_lock_irqsave(&adapter->abort_lock, flags);
spin_lock(&adapter->req_list_lock);
- old_req = zfcp_reqlist_find(adapter, old_req_id);
+ old_req = zfcp_reqlist_find(adapter, old_reqid);
spin_unlock(&adapter->req_list_lock);
if (!old_req) {
write_unlock_irqrestore(&adapter->abort_lock, flags);
zfcp_scsi_dbf_event_abort("lte1", adapter, scpnt, NULL,
- old_req_id);
+ old_reqid);
return FAILED; /* completion could be in progress */
}
old_req->data = NULL;
write_unlock_irqrestore(&adapter->abort_lock, flags);
while (retry--) {
- abrt_req = zfcp_fsf_abort_fcp_command(old_req_id, unit);
+ abrt_req = zfcp_fsf_abort_fcp_command(old_reqid, unit);
if (abrt_req)
break;
if (!(atomic_read(&adapter->status) &
ZFCP_STATUS_COMMON_RUNNING)) {
zfcp_scsi_dbf_event_abort("nres", adapter, scpnt, NULL,
- old_req_id);
+ old_reqid);
return SUCCESS;
}
}
abrt_req->status & ZFCP_STATUS_FSFREQ_COMPLETED);
if (abrt_req->status & ZFCP_STATUS_FSFREQ_ABORTSUCCEEDED)
- zfcp_scsi_dbf_event_abort("okay", adapter, scpnt, abrt_req, 0);
+ dbf_tag = "okay";
else if (abrt_req->status & ZFCP_STATUS_FSFREQ_ABORTNOTNEEDED)
- zfcp_scsi_dbf_event_abort("lte2", adapter, scpnt, abrt_req, 0);
+ dbf_tag = "lte2";
else {
- zfcp_scsi_dbf_event_abort("fail", adapter, scpnt, abrt_req, 0);
+ dbf_tag = "fail";
retval = FAILED;
}
+ zfcp_scsi_dbf_event_abort(dbf_tag, adapter, scpnt, abrt_req, old_reqid);
zfcp_fsf_req_free(abrt_req);
return retval;
}
struct fc_rport_identifiers ids;
struct fc_rport *rport;
+ if (port->rport)
+ return;
+
ids.node_name = port->wwnn;
ids.port_name = port->wwpn;
ids.port_id = port->d_id;
{
struct fc_rport *rport = port->rport;
- if (rport)
+ if (rport) {
fc_remote_port_delete(rport);
+ port->rport = NULL;
+ }
}
void zfcp_scsi_schedule_rport_register(struct zfcp_port *port)
struct Scsi_Host *scsi_host = class_to_shost(dev);
struct zfcp_adapter *adapter =
(struct zfcp_adapter *) scsi_host->hostdata[0];
+ u64 util;
+
+ spin_lock_bh(&adapter->qdio_stat_lock);
+ util = adapter->req_q_util;
+ spin_unlock_bh(&adapter->qdio_stat_lock);
return sprintf(buf, "%d %llu\n", atomic_read(&adapter->qdio_outb_full),
- (unsigned long long)adapter->req_q_util);
+ (unsigned long long)util);
}
static DEVICE_ATTR(queue_full, S_IRUGO, zfcp_sysfs_adapter_q_full_show, NULL);
}
if (temp_index != 0 && fan_index != 0) {
kenvctrld_task = kthread_run(kenvctrld, NULL, "kenvctrld");
- if (IS_ERR(kenvctrld_task))
- return PTR_ERR(kenvctrld_task);
+ if (IS_ERR(kenvctrld_task)) {
+ int err = PTR_ERR(kenvctrld_task);
+
+ kenvctrld_task = NULL;
+ return err;
+ }
}
return 0;
struct bbc_cpu_temperature *tp, *tpos;
struct bbc_fan_control *fp, *fpos;
- kthread_stop(kenvctrld_task);
+ if (kenvctrld_task)
+ kthread_stop(kenvctrld_task);
list_for_each_entry_safe(tp, tpos, &bp->temps, bp_list) {
list_del(&tp->bp_list);
static void open_s3_dev(struct t3cdev *);
static void close_s3_dev(struct t3cdev *);
-static void s3_err_handler(struct t3cdev *tdev, u32 status, u32 error);
+static void s3_event_handler(struct t3cdev *tdev, u32 event, u32 port);
static cxgb3_cpl_handler_func cxgb3i_cpl_handlers[NUM_CPL_CMDS];
static struct cxgb3_client t3c_client = {
.handlers = cxgb3i_cpl_handlers,
.add = open_s3_dev,
.remove = close_s3_dev,
- .err_handler = s3_err_handler,
+ .event_handler = s3_event_handler,
};
/**
cxgb3i_ddp_cleanup(t3dev);
}
-static void s3_err_handler(struct t3cdev *tdev, u32 status, u32 error)
+static void s3_event_handler(struct t3cdev *tdev, u32 event, u32 port)
{
struct cxgb3i_adapter *snic = cxgb3i_adapter_find_by_tdev(tdev);
- cxgb3i_log_info("snic 0x%p, tdev 0x%p, status 0x%x, err 0x%x.\n",
- snic, tdev, status, error);
+ cxgb3i_log_info("snic 0x%p, tdev 0x%p, event 0x%x, port 0x%x.\n",
+ snic, tdev, event, port);
if (!snic)
return;
- switch (status) {
+ switch (event) {
case OFFLOAD_STATUS_DOWN:
snic->flags |= CXGB3I_ADAPTER_FLAG_RESET;
break;
e_stat = ep->esb_stat;
if (e_stat & ESB_ST_COMPLETE) {
ep->esb_stat = e_stat & ~ESB_ST_REC_QUAL;
+ spin_unlock_bh(&ep->ex_lock);
if (e_stat & ESB_ST_REC_QUAL)
fc_exch_rrq(ep);
- spin_unlock_bh(&ep->ex_lock);
goto done;
} else {
resp = ep->resp;
struct fc_lport *lp;
struct fc_els_rrq *rrq;
struct fc_frame *fp;
- struct fc_seq *rrq_sp;
u32 did;
lp = ep->lp;
fp = fc_frame_alloc(lp, sizeof(*rrq));
if (!fp)
- return;
+ goto retry;
+
rrq = fc_frame_payload_get(fp, sizeof(*rrq));
memset(rrq, 0, sizeof(*rrq));
rrq->rrq_cmd = ELS_RRQ;
fc_host_port_id(lp->host), FC_TYPE_ELS,
FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0);
- rrq_sp = fc_exch_seq_send(lp, fp, fc_exch_rrq_resp, NULL, ep,
- lp->e_d_tov);
- if (!rrq_sp) {
- ep->esb_stat |= ESB_ST_REC_QUAL;
- fc_exch_timer_set_locked(ep, ep->r_a_tov);
+ if (fc_exch_seq_send(lp, fp, fc_exch_rrq_resp, NULL, ep, lp->e_d_tov))
+ return;
+
+retry:
+ spin_lock_bh(&ep->ex_lock);
+ if (ep->state & (FC_EX_RST_CLEANUP | FC_EX_DONE)) {
+ spin_unlock_bh(&ep->ex_lock);
+ /* drop hold for rec qual */
+ fc_exch_release(ep);
return;
}
+ ep->esb_stat |= ESB_ST_REC_QUAL;
+ fc_exch_timer_set_locked(ep, ep->r_a_tov);
+ spin_unlock_bh(&ep->ex_lock);
}
* good and have never sent us a successful tmf response
* then sent more data for the cmd.
*/
- spin_lock(&session->lock);
+ spin_lock_bh(&session->lock);
fail_scsi_task(task, DID_ABORT);
conn->tmf_state = TMF_INITIAL;
- spin_unlock(&session->lock);
+ spin_unlock_bh(&session->lock);
iscsi_start_tx(conn);
goto success_unlocked;
case TMF_TIMEDOUT:
if (!memcmp(phy->attached_sas_addr, ephy->attached_sas_addr,
SAS_ADDR_SIZE) && ephy->port) {
sas_port_add_phy(ephy->port, phy->phy);
+ phy->port = ephy->port;
phy->phy_state = PHY_DEVICE_DISCOVERED;
return 0;
}
if (ex->ex_phy[i].phy_state == PHY_VACANT ||
ex->ex_phy[i].phy_state == PHY_NOT_PRESENT)
continue;
-
+ /*
+ * Due to races, the phy might not get added to the
+ * wide port, so we add the phy to the wide port here.
+ */
if (SAS_ADDR(ex->ex_phy[i].attached_sas_addr) ==
- SAS_ADDR(child->sas_addr))
+ SAS_ADDR(child->sas_addr)) {
ex->ex_phy[i].phy_state= PHY_DEVICE_DISCOVERED;
+ res = sas_ex_join_wide_port(dev, i);
+ if (!res)
+ SAS_DPRINTK("Attaching ex phy%d to wide port %016llx\n",
+ i, SAS_ADDR(ex->ex_phy[i].attached_sas_addr));
+
+ }
}
+ res = 0;
}
return res;
}
static int sas_find_bcast_phy(struct domain_device *dev, int *phy_id,
- int from_phy)
+ int from_phy, bool update)
{
struct expander_device *ex = &dev->ex_dev;
int res = 0;
if (res)
goto out;
else if (phy_change_count != ex->ex_phy[i].phy_change_count) {
- ex->ex_phy[i].phy_change_count = phy_change_count;
+ if (update)
+ ex->ex_phy[i].phy_change_count =
+ phy_change_count;
*phy_id = i;
return 0;
}
kfree(rg_req);
return res;
}
+/**
+ * sas_find_bcast_dev - find the device issue BROADCAST(CHANGE).
+ * @dev:domain device to be detect.
+ * @src_dev: the device which originated BROADCAST(CHANGE).
+ *
+ * Add self-configuration expander suport. Suppose two expander cascading,
+ * when the first level expander is self-configuring, hotplug the disks in
+ * second level expander, BROADCAST(CHANGE) will not only be originated
+ * in the second level expander, but also be originated in the first level
+ * expander (see SAS protocol SAS 2r-14, 7.11 for detail), it is to say,
+ * expander changed count in two level expanders will all increment at least
+ * once, but the phy which chang count has changed is the source device which
+ * we concerned.
+ */
static int sas_find_bcast_dev(struct domain_device *dev,
struct domain_device **src_dev)
{
struct expander_device *ex = &dev->ex_dev;
int ex_change_count = -1;
+ int phy_id = -1;
int res;
+ struct domain_device *ch;
res = sas_get_ex_change_count(dev, &ex_change_count);
if (res)
goto out;
- if (ex_change_count != -1 &&
- ex_change_count != ex->ex_change_count) {
- *src_dev = dev;
- ex->ex_change_count = ex_change_count;
- } else {
- struct domain_device *ch;
-
- list_for_each_entry(ch, &ex->children, siblings) {
- if (ch->dev_type == EDGE_DEV ||
- ch->dev_type == FANOUT_DEV) {
- res = sas_find_bcast_dev(ch, src_dev);
- if (src_dev)
- return res;
- }
+ if (ex_change_count != -1 && ex_change_count != ex->ex_change_count) {
+ /* Just detect if this expander phys phy change count changed,
+ * in order to determine if this expander originate BROADCAST,
+ * and do not update phy change count field in our structure.
+ */
+ res = sas_find_bcast_phy(dev, &phy_id, 0, false);
+ if (phy_id != -1) {
+ *src_dev = dev;
+ ex->ex_change_count = ex_change_count;
+ SAS_DPRINTK("Expander phy change count has changed\n");
+ return res;
+ } else
+ SAS_DPRINTK("Expander phys DID NOT change\n");
+ }
+ list_for_each_entry(ch, &ex->children, siblings) {
+ if (ch->dev_type == EDGE_DEV || ch->dev_type == FANOUT_DEV) {
+ res = sas_find_bcast_dev(ch, src_dev);
+ if (src_dev)
+ return res;
}
}
out:
}
static void sas_unregister_devs_sas_addr(struct domain_device *parent,
- int phy_id)
+ int phy_id, bool last)
{
struct expander_device *ex_dev = &parent->ex_dev;
struct ex_phy *phy = &ex_dev->ex_phy[phy_id];
struct domain_device *child, *n;
-
- list_for_each_entry_safe(child, n, &ex_dev->children, siblings) {
- if (SAS_ADDR(child->sas_addr) ==
- SAS_ADDR(phy->attached_sas_addr)) {
- if (child->dev_type == EDGE_DEV ||
- child->dev_type == FANOUT_DEV)
- sas_unregister_ex_tree(child);
- else
- sas_unregister_dev(child);
- break;
+ if (last) {
+ list_for_each_entry_safe(child, n,
+ &ex_dev->children, siblings) {
+ if (SAS_ADDR(child->sas_addr) ==
+ SAS_ADDR(phy->attached_sas_addr)) {
+ if (child->dev_type == EDGE_DEV ||
+ child->dev_type == FANOUT_DEV)
+ sas_unregister_ex_tree(child);
+ else
+ sas_unregister_dev(child);
+ break;
+ }
}
+ sas_disable_routing(parent, phy->attached_sas_addr);
}
- sas_disable_routing(parent, phy->attached_sas_addr);
memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
sas_port_delete_phy(phy->port, phy->phy);
if (phy->port->num_phys == 0)
{
struct ex_phy *ex_phy = &dev->ex_dev.ex_phy[phy_id];
struct domain_device *child;
- int res;
+ bool found = false;
+ int res, i;
SAS_DPRINTK("ex %016llx phy%d new device attached\n",
SAS_ADDR(dev->sas_addr), phy_id);
res = sas_ex_phy_discover(dev, phy_id);
if (res)
goto out;
+ /* to support the wide port inserted */
+ for (i = 0; i < dev->ex_dev.num_phys; i++) {
+ struct ex_phy *ex_phy_temp = &dev->ex_dev.ex_phy[i];
+ if (i == phy_id)
+ continue;
+ if (SAS_ADDR(ex_phy_temp->attached_sas_addr) ==
+ SAS_ADDR(ex_phy->attached_sas_addr)) {
+ found = true;
+ break;
+ }
+ }
+ if (found) {
+ sas_ex_join_wide_port(dev, phy_id);
+ return 0;
+ }
res = sas_ex_discover_devices(dev, phy_id);
- if (res)
+ if (!res)
goto out;
list_for_each_entry(child, &dev->ex_dev.children, siblings) {
if (SAS_ADDR(child->sas_addr) ==
return res;
}
-static int sas_rediscover_dev(struct domain_device *dev, int phy_id)
+static int sas_rediscover_dev(struct domain_device *dev, int phy_id, bool last)
{
struct expander_device *ex = &dev->ex_dev;
struct ex_phy *phy = &ex->ex_phy[phy_id];
switch (res) {
case SMP_RESP_NO_PHY:
phy->phy_state = PHY_NOT_PRESENT;
- sas_unregister_devs_sas_addr(dev, phy_id);
+ sas_unregister_devs_sas_addr(dev, phy_id, last);
goto out; break;
case SMP_RESP_PHY_VACANT:
phy->phy_state = PHY_VACANT;
- sas_unregister_devs_sas_addr(dev, phy_id);
+ sas_unregister_devs_sas_addr(dev, phy_id, last);
goto out; break;
case SMP_RESP_FUNC_ACC:
break;
if (SAS_ADDR(attached_sas_addr) == 0) {
phy->phy_state = PHY_EMPTY;
- sas_unregister_devs_sas_addr(dev, phy_id);
+ sas_unregister_devs_sas_addr(dev, phy_id, last);
} else if (SAS_ADDR(attached_sas_addr) ==
SAS_ADDR(phy->attached_sas_addr)) {
SAS_DPRINTK("ex %016llx phy 0x%x broadcast flutter\n",
return res;
}
+/**
+ * sas_rediscover - revalidate the domain.
+ * @dev:domain device to be detect.
+ * @phy_id: the phy id will be detected.
+ *
+ * NOTE: this process _must_ quit (return) as soon as any connection
+ * errors are encountered. Connection recovery is done elsewhere.
+ * Discover process only interrogates devices in order to discover the
+ * domain.For plugging out, we un-register the device only when it is
+ * the last phy in the port, for other phys in this port, we just delete it
+ * from the port.For inserting, we do discovery when it is the
+ * first phy,for other phys in this port, we add it to the port to
+ * forming the wide-port.
+ */
static int sas_rediscover(struct domain_device *dev, const int phy_id)
{
struct expander_device *ex = &dev->ex_dev;
struct ex_phy *changed_phy = &ex->ex_phy[phy_id];
int res = 0;
int i;
+ bool last = true; /* is this the last phy of the port */
SAS_DPRINTK("ex %016llx phy%d originated BROADCAST(CHANGE)\n",
SAS_ADDR(dev->sas_addr), phy_id);
SAS_ADDR(changed_phy->attached_sas_addr)) {
SAS_DPRINTK("phy%d part of wide port with "
"phy%d\n", phy_id, i);
- goto out;
+ last = false;
+ break;
}
}
- res = sas_rediscover_dev(dev, phy_id);
+ res = sas_rediscover_dev(dev, phy_id, last);
} else
res = sas_discover_new(dev, phy_id);
-out:
return res;
}
do {
phy_id = -1;
- res = sas_find_bcast_phy(dev, &phy_id, i);
+ res = sas_find_bcast_phy(dev, &phy_id, i, true);
if (phy_id == -1)
break;
res = sas_rediscover(dev, phy_id);
}
}
- /* find a port */
+ /* see if the phy should be part of a wide port */
spin_lock_irqsave(&sas_ha->phy_port_lock, flags);
for (i = 0; i < sas_ha->num_phys; i++) {
port = sas_ha->sas_port[i];
SAS_DPRINTK("phy%d matched wide port%d\n", phy->id,
port->id);
break;
- } else if (*(u64 *) port->sas_addr == 0 && port->num_phys==0) {
- memcpy(port->sas_addr, phy->sas_addr, SAS_ADDR_SIZE);
- break;
}
spin_unlock(&port->phy_list_lock);
}
+ /* The phy does not match any existing port, create a new one */
+ if (i == sas_ha->num_phys) {
+ for (i = 0; i < sas_ha->num_phys; i++) {
+ port = sas_ha->sas_port[i];
+ spin_lock(&port->phy_list_lock);
+ if (*(u64 *)port->sas_addr == 0
+ && port->num_phys == 0) {
+ memcpy(port->sas_addr, phy->sas_addr,
+ SAS_ADDR_SIZE);
+ break;
+ }
+ spin_unlock(&port->phy_list_lock);
+ }
+ }
if (i >= sas_ha->num_phys) {
printk(KERN_NOTICE "%s: couldn't find a free port, bug?\n",
spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
}
+/**
+ * mpt2sas_base_start_watchdog - start the fault_reset_work_q
+ * @ioc: pointer to scsi command object
+ * Context: sleep.
+ *
+ * Return nothing.
+ */
+void
+mpt2sas_base_start_watchdog(struct MPT2SAS_ADAPTER *ioc)
+{
+ unsigned long flags;
+
+ if (ioc->fault_reset_work_q)
+ return;
+
+ /* initialize fault polling */
+ INIT_DELAYED_WORK(&ioc->fault_reset_work, _base_fault_reset_work);
+ snprintf(ioc->fault_reset_work_q_name,
+ sizeof(ioc->fault_reset_work_q_name), "poll_%d_status", ioc->id);
+ ioc->fault_reset_work_q =
+ create_singlethread_workqueue(ioc->fault_reset_work_q_name);
+ if (!ioc->fault_reset_work_q) {
+ printk(MPT2SAS_ERR_FMT "%s: failed (line=%d)\n",
+ ioc->name, __func__, __LINE__);
+ return;
+ }
+ spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+ if (ioc->fault_reset_work_q)
+ queue_delayed_work(ioc->fault_reset_work_q,
+ &ioc->fault_reset_work,
+ msecs_to_jiffies(FAULT_POLLING_INTERVAL));
+ spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+}
+
+/**
+ * mpt2sas_base_stop_watchdog - stop the fault_reset_work_q
+ * @ioc: pointer to scsi command object
+ * Context: sleep.
+ *
+ * Return nothing.
+ */
+void
+mpt2sas_base_stop_watchdog(struct MPT2SAS_ADAPTER *ioc)
+{
+ unsigned long flags;
+ struct workqueue_struct *wq;
+
+ spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+ wq = ioc->fault_reset_work_q;
+ ioc->fault_reset_work_q = NULL;
+ spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+ if (wq) {
+ if (!cancel_delayed_work(&ioc->fault_reset_work))
+ flush_workqueue(wq);
+ destroy_workqueue(wq);
+ }
+}
+
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
/**
* _base_sas_ioc_info - verbose translation of the ioc status
if (sas_loginfo.dw.bus_type != 3 /*SAS*/)
return;
+ /* each nexus loss loginfo */
+ if (log_info == 0x31170000)
+ return;
+
/* eat the loginfos associated with task aborts */
if (ioc->ignore_loginfos && (log_info == 30050000 || log_info ==
0x31140000 || log_info == 0x31130000))
}
}
- pci_set_drvdata(pdev, ioc->shost);
_base_mask_interrupts(ioc);
r = _base_enable_msix(ioc);
if (r)
ioc->pci_irq = -1;
pci_release_selected_regions(ioc->pdev, ioc->bars);
pci_disable_device(pdev);
- pci_set_drvdata(pdev, NULL);
return r;
}
ioc->chip_phys = 0;
pci_release_selected_regions(ioc->pdev, ioc->bars);
pci_disable_device(pdev);
- pci_set_drvdata(pdev, NULL);
return;
}
mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
{
int r, i;
- unsigned long flags;
dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
__func__));
if (r)
return r;
+ pci_set_drvdata(ioc->pdev, ioc->shost);
r = _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET);
if (r)
goto out_free_resources;
if (r)
goto out_free_resources;
- /* initialize fault polling */
- INIT_DELAYED_WORK(&ioc->fault_reset_work, _base_fault_reset_work);
- snprintf(ioc->fault_reset_work_q_name,
- sizeof(ioc->fault_reset_work_q_name), "poll_%d_status", ioc->id);
- ioc->fault_reset_work_q =
- create_singlethread_workqueue(ioc->fault_reset_work_q_name);
- if (!ioc->fault_reset_work_q) {
- printk(MPT2SAS_ERR_FMT "%s: failed (line=%d)\n",
- ioc->name, __func__, __LINE__);
- goto out_free_resources;
- }
- spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
- if (ioc->fault_reset_work_q)
- queue_delayed_work(ioc->fault_reset_work_q,
- &ioc->fault_reset_work,
- msecs_to_jiffies(FAULT_POLLING_INTERVAL));
- spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+ mpt2sas_base_start_watchdog(ioc);
return 0;
out_free_resources:
ioc->remove_host = 1;
mpt2sas_base_free_resources(ioc);
_base_release_memory_pools(ioc);
+ pci_set_drvdata(ioc->pdev, NULL);
kfree(ioc->tm_cmds.reply);
kfree(ioc->transport_cmds.reply);
kfree(ioc->config_cmds.reply);
void
mpt2sas_base_detach(struct MPT2SAS_ADAPTER *ioc)
{
- unsigned long flags;
- struct workqueue_struct *wq;
dexitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
__func__));
- spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
- wq = ioc->fault_reset_work_q;
- ioc->fault_reset_work_q = NULL;
- spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
- if (!cancel_delayed_work(&ioc->fault_reset_work))
- flush_workqueue(wq);
- destroy_workqueue(wq);
-
+ mpt2sas_base_stop_watchdog(ioc);
mpt2sas_base_free_resources(ioc);
_base_release_memory_pools(ioc);
+ pci_set_drvdata(ioc->pdev, NULL);
kfree(ioc->pfacts);
kfree(ioc->ctl_cmds.reply);
kfree(ioc->base_cmds.reply);
#define MPT2SAS_DRIVER_NAME "mpt2sas"
#define MPT2SAS_AUTHOR "LSI Corporation <DL-MPTFusionLinux@lsi.com>"
#define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver"
-#define MPT2SAS_DRIVER_VERSION "01.100.03.00"
+#define MPT2SAS_DRIVER_VERSION "01.100.04.00"
#define MPT2SAS_MAJOR_VERSION 01
#define MPT2SAS_MINOR_VERSION 100
-#define MPT2SAS_BUILD_VERSION 03
+#define MPT2SAS_BUILD_VERSION 04
#define MPT2SAS_RELEASE_VERSION 00
/*
/* base shared API */
extern struct list_head mpt2sas_ioc_list;
+void mpt2sas_base_start_watchdog(struct MPT2SAS_ADAPTER *ioc);
+void mpt2sas_base_stop_watchdog(struct MPT2SAS_ADAPTER *ioc);
int mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc);
void mpt2sas_base_detach(struct MPT2SAS_ADAPTER *ioc);
Mpi2ConfigRequest_t *config_request;
int r;
u8 retry_count;
- u8 issue_reset;
+ u8 issue_host_reset = 0;
u16 wait_state_count;
+ mutex_lock(&ioc->config_cmds.mutex);
if (ioc->config_cmds.status != MPT2_CMD_NOT_USED) {
printk(MPT2SAS_ERR_FMT "%s: config_cmd in use\n",
ioc->name, __func__);
+ mutex_unlock(&ioc->config_cmds.mutex);
return -EAGAIN;
}
retry_count = 0;
retry_config:
+ if (retry_count) {
+ if (retry_count > 2) /* attempt only 2 retries */
+ return -EFAULT;
+ printk(MPT2SAS_INFO_FMT "%s: attempting retry (%d)\n",
+ ioc->name, __func__, retry_count);
+ }
wait_state_count = 0;
ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
printk(MPT2SAS_ERR_FMT
"%s: failed due to ioc not operational\n",
ioc->name, __func__);
- ioc->config_cmds.status = MPT2_CMD_NOT_USED;
- return -EFAULT;
+ r = -EFAULT;
+ goto out;
}
ssleep(1);
ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
if (!smid) {
printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
ioc->name, __func__);
- ioc->config_cmds.status = MPT2_CMD_NOT_USED;
- return -EAGAIN;
+ r = -EAGAIN;
+ goto out;
}
r = 0;
ioc->name, __func__);
_debug_dump_mf(mpi_request,
sizeof(Mpi2ConfigRequest_t)/4);
- if (!(ioc->config_cmds.status & MPT2_CMD_RESET))
- issue_reset = 1;
- goto issue_host_reset;
+ retry_count++;
+ if (ioc->config_cmds.smid == smid)
+ mpt2sas_base_free_smid(ioc, smid);
+ if ((ioc->shost_recovery) ||
+ (ioc->config_cmds.status & MPT2_CMD_RESET))
+ goto retry_config;
+ issue_host_reset = 1;
+ r = -EFAULT;
+ goto out;
}
if (ioc->config_cmds.status & MPT2_CMD_REPLY_VALID)
memcpy(mpi_reply, ioc->config_cmds.reply,
if (retry_count)
printk(MPT2SAS_INFO_FMT "%s: retry completed!!\n",
ioc->name, __func__);
+out:
ioc->config_cmds.status = MPT2_CMD_NOT_USED;
- return r;
-
- issue_host_reset:
- if (issue_reset)
+ mutex_unlock(&ioc->config_cmds.mutex);
+ if (issue_host_reset)
mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
FORCE_BIG_HAMMER);
- ioc->config_cmds.status = MPT2_CMD_NOT_USED;
- if (!retry_count) {
- printk(MPT2SAS_INFO_FMT "%s: attempting retry\n",
- ioc->name, __func__);
- retry_count++;
- goto retry_config;
- }
- return -EFAULT;
+ return r;
}
/**
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2ManufacturingPage0_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2BiosPage2_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2BiosPage3_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2IOUnitPage0_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2IOUnitPage1_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2IOCPage8_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2SasDevicePage0_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2SasDevicePage1_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
Mpi2ConfigReply_t mpi_reply;
Mpi2SasIOUnitPage0_t config_page;
- mutex_lock(&ioc->config_cmds.mutex);
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
Mpi2ConfigRequest_t mpi_request;
int r;
struct config_request mem;
-
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sz);
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sz);
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2ExpanderPage0_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2ExpanderPage1_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2SasEnclosurePage0_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2SasPhyPage0_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2SasPhyPage1_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(config_page, 0, sizeof(Mpi2RaidVolPage1_t));
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
struct config_request mem;
u16 ioc_status;
- mutex_lock(&ioc->config_cmds.mutex);
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
*num_pds = 0;
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
memset(config_page, 0, sz);
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
int r;
struct config_request mem;
- mutex_lock(&ioc->config_cmds.mutex);
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
memset(config_page, 0, sizeof(Mpi2RaidPhysDiskPage0_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
struct config_request mem;
u16 ioc_status;
- mutex_lock(&ioc->config_cmds.mutex);
*volume_handle = 0;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
_config_free_config_dma_memory(ioc, &mem);
out:
- mutex_unlock(&ioc->config_cmds.mutex);
return r;
}
char *desc_ioc_state = NULL;
char *desc_scsi_status = NULL;
char *desc_scsi_state = ioc->tmp_string;
+ u32 log_info = le32_to_cpu(mpi_reply->IOCLogInfo);
+
+ if (log_info == 0x31170000)
+ return;
switch (ioc_status) {
case MPI2_IOCSTATUS_SUCCESS:
__le64 sas_address;
int i;
unsigned long flags;
- struct _sas_port *mpt2sas_port;
+ struct _sas_port *mpt2sas_port = NULL;
int rc = 0;
if (!handle)
&expander_pg1, i, handle))) {
printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
ioc->name, __FILE__, __LINE__, __func__);
- continue;
+ rc = -1;
+ goto out_fail;
}
sas_expander->phy[i].handle = handle;
sas_expander->phy[i].phy_id = i;
- mpt2sas_transport_add_expander_phy(ioc, &sas_expander->phy[i],
- expander_pg1, sas_expander->parent_dev);
+
+ if ((mpt2sas_transport_add_expander_phy(ioc,
+ &sas_expander->phy[i], expander_pg1,
+ sas_expander->parent_dev))) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ rc = -1;
+ goto out_fail;
+ }
}
if (sas_expander->enclosure_handle) {
out_fail:
- if (sas_expander)
- kfree(sas_expander->phy);
+ if (mpt2sas_port)
+ mpt2sas_transport_port_remove(ioc, sas_expander->sas_address,
+ sas_expander->parent_handle);
kfree(sas_expander);
return rc;
}
sas_device->hidden_raid_component = is_pd;
/* get enclosure_logical_id */
- if (!(mpt2sas_config_get_enclosure_pg0(ioc, &mpi_reply, &enclosure_pg0,
- MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
- sas_device->enclosure_handle))) {
+ if (sas_device->enclosure_handle && !(mpt2sas_config_get_enclosure_pg0(
+ ioc, &mpi_reply, &enclosure_pg0, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
+ sas_device->enclosure_handle)))
sas_device->enclosure_logical_id =
le64_to_cpu(enclosure_pg0.EnclosureLogicalID);
- }
/* get device name */
sas_device->device_name = le64_to_cpu(sas_device_pg0.DeviceName);
u16 handle = le16_to_cpu(element->VolDevHandle);
int rc;
-#if 0 /* RAID_HACKS */
- if (le32_to_cpu(event_data->Flags) &
- MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG)
- return;
-#endif
-
mpt2sas_config_get_volume_wwid(ioc, handle, &wwid);
if (!wwid) {
printk(MPT2SAS_ERR_FMT
unsigned long flags;
struct MPT2SAS_TARGET *sas_target_priv_data;
-#if 0 /* RAID_HACKS */
- if (le32_to_cpu(event_data->Flags) &
- MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG)
- return;
-#endif
-
spin_lock_irqsave(&ioc->raid_device_lock, flags);
raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
struct _sas_device *sas_device;
unsigned long flags;
u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
+ Mpi2ConfigReply_t mpi_reply;
+ Mpi2SasDevicePage0_t sas_device_pg0;
+ u32 ioc_status;
spin_lock_irqsave(&ioc->sas_device_lock, flags);
sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- if (sas_device)
+ if (sas_device) {
sas_device->hidden_raid_component = 1;
- else
- _scsih_add_device(ioc, handle, 0, 1);
+ return;
+ }
+
+ if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
+ MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return;
+ }
+
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return;
+ }
+
+ _scsih_link_change(ioc,
+ le16_to_cpu(sas_device_pg0.ParentDevHandle),
+ handle, sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
+
+ _scsih_add_device(ioc, handle, 0, 1);
}
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
{
Mpi2EventIrConfigElement_t *element;
int i;
+ u8 foreign_config;
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
_scsih_sas_ir_config_change_event_debug(ioc, event_data);
#endif
+ foreign_config = (le32_to_cpu(event_data->Flags) &
+ MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ? 1 : 0;
element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
for (i = 0; i < event_data->NumElements; i++, element++) {
switch (element->ReasonCode) {
case MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED:
case MPI2_EVENT_IR_CHANGE_RC_ADDED:
- _scsih_sas_volume_add(ioc, element);
+ if (!foreign_config)
+ _scsih_sas_volume_add(ioc, element);
break;
case MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED:
case MPI2_EVENT_IR_CHANGE_RC_REMOVED:
- _scsih_sas_volume_delete(ioc, element);
+ if (!foreign_config)
+ _scsih_sas_volume_delete(ioc, element);
break;
case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED:
_scsih_sas_pd_hide(ioc, element);
u32 state;
struct _sas_device *sas_device;
unsigned long flags;
+ Mpi2ConfigReply_t mpi_reply;
+ Mpi2SasDevicePage0_t sas_device_pg0;
+ u32 ioc_status;
if (event_data->ReasonCode != MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED)
return;
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
switch (state) {
-#if 0
- case MPI2_RAID_PD_STATE_OFFLINE:
- if (sas_device)
- _scsih_remove_device(ioc, handle);
- break;
-#endif
case MPI2_RAID_PD_STATE_ONLINE:
case MPI2_RAID_PD_STATE_DEGRADED:
case MPI2_RAID_PD_STATE_REBUILDING:
case MPI2_RAID_PD_STATE_OPTIMAL:
- if (sas_device)
+ if (sas_device) {
sas_device->hidden_raid_component = 1;
- else
- _scsih_add_device(ioc, handle, 0, 1);
+ return;
+ }
+
+ if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply,
+ &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
+ handle))) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return;
+ }
+
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return;
+ }
+
+ _scsih_link_change(ioc,
+ le16_to_cpu(sas_device_pg0.ParentDevHandle),
+ handle, sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
+
+ _scsih_add_device(ioc, handle, 0, 1);
+
break;
+ case MPI2_RAID_PD_STATE_OFFLINE:
case MPI2_RAID_PD_STATE_NOT_CONFIGURED:
case MPI2_RAID_PD_STATE_NOT_COMPATIBLE:
case MPI2_RAID_PD_STATE_HOT_SPARE:
struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
u32 device_state;
+ mpt2sas_base_stop_watchdog(ioc);
flush_scheduled_work();
scsi_block_requests(shost);
device_state = pci_choose_state(pdev, state);
mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, SOFT_RESET);
scsi_unblock_requests(shost);
+ mpt2sas_base_start_watchdog(ioc);
return 0;
}
#endif /* CONFIG_PM */
uint32_t cnt;
uint8_t *c = b;
- printk(" 0 1 2 3 4 5 6 7 8 9 Ah Bh Ch Dh Eh "
+ printk(" 0 1 2 3 4 5 6 7 8 9 Ah Bh Ch Dh Eh "
"Fh\n");
printk("------------------------------------------------------------"
"--\n");
- for (cnt = 0; cnt < size; cnt++, c++) {
- printk(KERN_DEBUG "%02x", *c);
- if (!(cnt % 16))
- printk(KERN_DEBUG "\n");
+ for (cnt = 0; cnt < size; c++) {
+ printk(KERN_INFO "%02x", *c);
+ if (!(++cnt % 16))
+ printk(KERN_INFO "\n");
else
- printk(KERN_DEBUG " ");
+ printk(KERN_INFO " ");
}
- if (cnt % 16)
- printk(KERN_DEBUG "\n");
+ printk(KERN_INFO "\n");
}
#define MAX_SRBS MAX_CMDS_TO_RISC
#define MBOX_AEN_REG_COUNT 5
#define MAX_INIT_RETRIES 5
-#define IOCB_HIWAT_CUSHION 16
/*
* Buffer sizes
uint16_t cc_stat;
u_long r_start; /* Time we recieve a cmd from OS */
u_long u_start; /* Time when we handed the cmd to F/W */
+
+ /* Used for extended sense / status continuation */
+ uint8_t *req_sense_ptr;
+ uint16_t req_sense_len;
+ uint16_t reserved2;
};
/*
uint32_t tot_ddbs;
uint16_t iocb_cnt;
- uint16_t iocb_hiwat;
/* SRB cache. */
#define SRB_MIN_REQ 128
/* Map ddb_list entry by FW ddb index */
struct ddb_entry *fw_ddb_index_map[MAX_DDB_ENTRIES];
+ /* Saved srb for status continuation entry processing */
+ struct srb *status_srb;
};
static inline int is_qla4010(struct scsi_qla_host *ha)
*************************************************************************/
#define IOCB_MAX_CDB_LEN 16 /* Bytes in a CBD */
#define IOCB_MAX_SENSEDATA_LEN 32 /* Bytes of sense data */
+#define IOCB_MAX_EXT_SENSEDATA_LEN 60 /* Bytes of extended sense data */
/* IOCB header structure */
struct qla4_header {
};
+/* Status Continuation entry */
+struct status_cont_entry {
+ struct qla4_header hdr; /* 00-03 */
+ uint8_t ext_sense_data[IOCB_MAX_EXT_SENSEDATA_LEN]; /* 04-63 */
+};
+
struct passthru0 {
struct qla4_header hdr; /* 00-03 */
uint32_t handle; /* 04-07 */
#include "ql4_dbg.h"
#include "ql4_inline.h"
-
#include <scsi/scsi_tcq.h>
+static int
+qla4xxx_space_in_req_ring(struct scsi_qla_host *ha, uint16_t req_cnt)
+{
+ uint16_t cnt;
+
+ /* Calculate number of free request entries. */
+ if ((req_cnt + 2) >= ha->req_q_count) {
+ cnt = (uint16_t) le32_to_cpu(ha->shadow_regs->req_q_out);
+ if (ha->request_in < cnt)
+ ha->req_q_count = cnt - ha->request_in;
+ else
+ ha->req_q_count = REQUEST_QUEUE_DEPTH -
+ (ha->request_in - cnt);
+ }
+
+ /* Check if room for request in request ring. */
+ if ((req_cnt + 2) < ha->req_q_count)
+ return 1;
+ else
+ return 0;
+}
+
+static void qla4xxx_advance_req_ring_ptr(struct scsi_qla_host *ha)
+{
+ /* Advance request queue pointer */
+ if (ha->request_in == (REQUEST_QUEUE_DEPTH - 1)) {
+ ha->request_in = 0;
+ ha->request_ptr = ha->request_ring;
+ } else {
+ ha->request_in++;
+ ha->request_ptr++;
+ }
+}
+
/**
* qla4xxx_get_req_pkt - returns a valid entry in request queue.
* @ha: Pointer to host adapter structure.
static int qla4xxx_get_req_pkt(struct scsi_qla_host *ha,
struct queue_entry **queue_entry)
{
- uint16_t request_in;
- uint8_t status = QLA_SUCCESS;
-
- *queue_entry = ha->request_ptr;
+ uint16_t req_cnt = 1;
- /* get the latest request_in and request_out index */
- request_in = ha->request_in;
- ha->request_out = (uint16_t) le32_to_cpu(ha->shadow_regs->req_q_out);
-
- /* Advance request queue pointer and check for queue full */
- if (request_in == (REQUEST_QUEUE_DEPTH - 1)) {
- request_in = 0;
- ha->request_ptr = ha->request_ring;
- } else {
- request_in++;
- ha->request_ptr++;
- }
-
- /* request queue is full, try again later */
- if ((ha->iocb_cnt + 1) >= ha->iocb_hiwat) {
- /* restore request pointer */
- ha->request_ptr = *queue_entry;
- status = QLA_ERROR;
- } else {
- ha->request_in = request_in;
+ if (qla4xxx_space_in_req_ring(ha, req_cnt)) {
+ *queue_entry = ha->request_ptr;
memset(*queue_entry, 0, sizeof(**queue_entry));
+
+ qla4xxx_advance_req_ring_ptr(ha);
+ ha->req_q_count -= req_cnt;
+ return QLA_SUCCESS;
}
- return status;
+ return QLA_ERROR;
}
/**
return status;
}
-static struct continuation_t1_entry* qla4xxx_alloc_cont_entry(
- struct scsi_qla_host *ha)
+static struct continuation_t1_entry *
+qla4xxx_alloc_cont_entry(struct scsi_qla_host *ha)
{
struct continuation_t1_entry *cont_entry;
cont_entry = (struct continuation_t1_entry *)ha->request_ptr;
- /* Advance request queue pointer */
- if (ha->request_in == (REQUEST_QUEUE_DEPTH - 1)) {
- ha->request_in = 0;
- ha->request_ptr = ha->request_ring;
- } else {
- ha->request_in++;
- ha->request_ptr++;
- }
+ qla4xxx_advance_req_ring_ptr(ha);
/* Load packet defaults */
cont_entry->hdr.entryType = ET_CONTINUE;
struct scsi_cmnd *cmd = srb->cmd;
struct ddb_entry *ddb_entry;
struct command_t3_entry *cmd_entry;
-
int nseg;
uint16_t tot_dsds;
uint16_t req_cnt;
-
unsigned long flags;
- uint16_t cnt;
uint32_t index;
char tag[2];
index = (uint32_t)cmd->request->tag;
+ /*
+ * Check to see if adapter is online before placing request on
+ * request queue. If a reset occurs and a request is in the queue,
+ * the firmware will still attempt to process the request, retrieving
+ * garbage for pointers.
+ */
+ if (!test_bit(AF_ONLINE, &ha->flags)) {
+ DEBUG2(printk("scsi%ld: %s: Adapter OFFLINE! "
+ "Do not issue command.\n",
+ ha->host_no, __func__));
+ goto queuing_error;
+ }
+
/* Calculate the number of request entries needed. */
nseg = scsi_dma_map(cmd);
if (nseg < 0)
tot_dsds = nseg;
req_cnt = qla4xxx_calc_request_entries(tot_dsds);
-
- if (ha->req_q_count < (req_cnt + 2)) {
- cnt = (uint16_t) le32_to_cpu(ha->shadow_regs->req_q_out);
- if (ha->request_in < cnt)
- ha->req_q_count = cnt - ha->request_in;
- else
- ha->req_q_count = REQUEST_QUEUE_DEPTH -
- (ha->request_in - cnt);
- }
-
- if (ha->req_q_count < (req_cnt + 2))
+ if (!qla4xxx_space_in_req_ring(ha, req_cnt))
goto queuing_error;
/* total iocbs active */
break;
}
-
- /* Advance request queue pointer */
- ha->request_in++;
- if (ha->request_in == REQUEST_QUEUE_DEPTH) {
- ha->request_in = 0;
- ha->request_ptr = ha->request_ring;
- } else
- ha->request_ptr++;
-
-
+ qla4xxx_advance_req_ring_ptr(ha);
qla4xxx_build_scsi_iocbs(srb, cmd_entry, tot_dsds);
wmb();
- /*
- * Check to see if adapter is online before placing request on
- * request queue. If a reset occurs and a request is in the queue,
- * the firmware will still attempt to process the request, retrieving
- * garbage for pointers.
- */
- if (!test_bit(AF_ONLINE, &ha->flags)) {
- DEBUG2(printk("scsi%ld: %s: Adapter OFFLINE! "
- "Do not issue command.\n",
- ha->host_no, __func__));
- goto queuing_error;
- }
-
srb->cmd->host_scribble = (unsigned char *)srb;
/* update counters */
#include "ql4_dbg.h"
#include "ql4_inline.h"
+/**
+ * qla4xxx_copy_sense - copy sense data into cmd sense buffer
+ * @ha: Pointer to host adapter structure.
+ * @sts_entry: Pointer to status entry structure.
+ * @srb: Pointer to srb structure.
+ **/
+static void qla4xxx_copy_sense(struct scsi_qla_host *ha,
+ struct status_entry *sts_entry,
+ struct srb *srb)
+{
+ struct scsi_cmnd *cmd = srb->cmd;
+ uint16_t sense_len;
+
+ memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
+ sense_len = le16_to_cpu(sts_entry->senseDataByteCnt);
+ if (sense_len == 0)
+ return;
+
+ /* Save total available sense length,
+ * not to exceed cmd's sense buffer size */
+ sense_len = min_t(uint16_t, sense_len, SCSI_SENSE_BUFFERSIZE);
+ srb->req_sense_ptr = cmd->sense_buffer;
+ srb->req_sense_len = sense_len;
+
+ /* Copy sense from sts_entry pkt */
+ sense_len = min_t(uint16_t, sense_len, IOCB_MAX_SENSEDATA_LEN);
+ memcpy(cmd->sense_buffer, sts_entry->senseData, sense_len);
+
+ DEBUG2(printk(KERN_INFO "scsi%ld:%d:%d:%d: %s: sense key = %x, "
+ "ASL= %02x, ASC/ASCQ = %02x/%02x\n", ha->host_no,
+ cmd->device->channel, cmd->device->id,
+ cmd->device->lun, __func__,
+ sts_entry->senseData[2] & 0x0f,
+ sts_entry->senseData[7],
+ sts_entry->senseData[12],
+ sts_entry->senseData[13]));
+
+ DEBUG5(qla4xxx_dump_buffer(cmd->sense_buffer, sense_len));
+ srb->flags |= SRB_GOT_SENSE;
+
+ /* Update srb, in case a sts_cont pkt follows */
+ srb->req_sense_ptr += sense_len;
+ srb->req_sense_len -= sense_len;
+ if (srb->req_sense_len != 0)
+ ha->status_srb = srb;
+ else
+ ha->status_srb = NULL;
+}
+
+/**
+ * qla4xxx_status_cont_entry - Process a Status Continuations entry.
+ * @ha: SCSI driver HA context
+ * @sts_cont: Entry pointer
+ *
+ * Extended sense data.
+ */
+static void
+qla4xxx_status_cont_entry(struct scsi_qla_host *ha,
+ struct status_cont_entry *sts_cont)
+{
+ struct srb *srb = ha->status_srb;
+ struct scsi_cmnd *cmd;
+ uint8_t sense_len;
+
+ if (srb == NULL)
+ return;
+
+ cmd = srb->cmd;
+ if (cmd == NULL) {
+ DEBUG2(printk(KERN_INFO "scsi%ld: %s: Cmd already returned "
+ "back to OS srb=%p srb->state:%d\n", ha->host_no,
+ __func__, srb, srb->state));
+ ha->status_srb = NULL;
+ return;
+ }
+
+ /* Copy sense data. */
+ sense_len = min_t(uint16_t, srb->req_sense_len,
+ IOCB_MAX_EXT_SENSEDATA_LEN);
+ memcpy(srb->req_sense_ptr, sts_cont->ext_sense_data, sense_len);
+ DEBUG5(qla4xxx_dump_buffer(srb->req_sense_ptr, sense_len));
+
+ srb->req_sense_ptr += sense_len;
+ srb->req_sense_len -= sense_len;
+
+ /* Place command on done queue. */
+ if (srb->req_sense_len == 0) {
+ qla4xxx_srb_compl(ha, srb);
+ ha->status_srb = NULL;
+ }
+}
+
/**
* qla4xxx_status_entry - processes status IOCBs
* @ha: Pointer to host adapter structure.
struct srb *srb;
struct ddb_entry *ddb_entry;
uint32_t residual;
- uint16_t sensebytecnt;
srb = qla4xxx_del_from_active_array(ha, le32_to_cpu(sts_entry->handle));
if (!srb) {
break;
/* Copy Sense Data into sense buffer. */
- memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
-
- sensebytecnt = le16_to_cpu(sts_entry->senseDataByteCnt);
- if (sensebytecnt == 0)
- break;
-
- memcpy(cmd->sense_buffer, sts_entry->senseData,
- min_t(uint16_t, sensebytecnt, SCSI_SENSE_BUFFERSIZE));
-
- DEBUG2(printk("scsi%ld:%d:%d:%d: %s: sense key = %x, "
- "ASC/ASCQ = %02x/%02x\n", ha->host_no,
- cmd->device->channel, cmd->device->id,
- cmd->device->lun, __func__,
- sts_entry->senseData[2] & 0x0f,
- sts_entry->senseData[12],
- sts_entry->senseData[13]));
-
- srb->flags |= SRB_GOT_SENSE;
+ qla4xxx_copy_sense(ha, sts_entry, srb);
break;
case SCS_INCOMPLETE:
break;
/* Copy Sense Data into sense buffer. */
- memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
-
- sensebytecnt =
- le16_to_cpu(sts_entry->senseDataByteCnt);
- if (sensebytecnt == 0)
- break;
-
- memcpy(cmd->sense_buffer, sts_entry->senseData,
- min_t(uint16_t, sensebytecnt, SCSI_SENSE_BUFFERSIZE));
-
- DEBUG2(printk("scsi%ld:%d:%d:%d: %s: sense key = %x, "
- "ASC/ASCQ = %02x/%02x\n", ha->host_no,
- cmd->device->channel, cmd->device->id,
- cmd->device->lun, __func__,
- sts_entry->senseData[2] & 0x0f,
- sts_entry->senseData[12],
- sts_entry->senseData[13]));
+ qla4xxx_copy_sense(ha, sts_entry, srb);
} else {
/*
* If RISC reports underrun and target does not
status_entry_exit:
- /* complete the request */
+ /* complete the request, if not waiting for status_continuation pkt */
srb->cc_stat = sts_entry->completionStatus;
- qla4xxx_srb_compl(ha, srb);
+ if (ha->status_srb == NULL)
+ qla4xxx_srb_compl(ha, srb);
}
/**
/* process entry */
switch (sts_entry->hdr.entryType) {
case ET_STATUS:
- /*
- * Common status - Single completion posted in single
- * IOSB.
- */
+ /* Common status */
qla4xxx_status_entry(ha, sts_entry);
break;
break;
case ET_STATUS_CONTINUATION:
- /* Just throw away the status continuation entries */
- DEBUG2(printk("scsi%ld: %s: Status Continuation entry "
- "- ignoring\n", ha->host_no, __func__));
+ qla4xxx_status_cont_entry(ha,
+ (struct status_cont_entry *) sts_entry);
break;
case ET_COMMAND:
mbox_sts[0]));
return QLA_ERROR;
}
-
- /* High-water mark of IOCBs */
- ha->iocb_hiwat = mbox_sts[2];
- if (ha->iocb_hiwat > IOCB_HIWAT_CUSHION)
- ha->iocb_hiwat -= IOCB_HIWAT_CUSHION;
- else
- dev_info(&ha->pdev->dev, "WARNING!!! You have less than %d "
- "firmware IOCBs available (%d).\n",
- IOCB_HIWAT_CUSHION, ha->iocb_hiwat);
-
return QLA_SUCCESS;
}
static int qla4xxx_host_get_param(struct Scsi_Host *shost,
enum iscsi_host_param param, char *buf);
static void qla4xxx_recovery_timedout(struct iscsi_cls_session *session);
+static enum blk_eh_timer_return qla4xxx_eh_cmd_timed_out(struct scsi_cmnd *sc);
/*
* SCSI host template entry points
.eh_device_reset_handler = qla4xxx_eh_device_reset,
.eh_target_reset_handler = qla4xxx_eh_target_reset,
.eh_host_reset_handler = qla4xxx_eh_host_reset,
+ .eh_timed_out = qla4xxx_eh_cmd_timed_out,
.slave_configure = qla4xxx_slave_configure,
.slave_alloc = qla4xxx_slave_alloc,
static struct scsi_transport_template *qla4xxx_scsi_transport;
+static enum blk_eh_timer_return qla4xxx_eh_cmd_timed_out(struct scsi_cmnd *sc)
+{
+ struct iscsi_cls_session *session;
+ struct ddb_entry *ddb_entry;
+
+ session = starget_to_session(scsi_target(sc->device));
+ ddb_entry = session->dd_data;
+
+ /* if we are not logged in then the LLD is going to clean up the cmd */
+ if (atomic_read(&ddb_entry->state) != DDB_STATE_ONLINE)
+ return BLK_EH_RESET_TIMER;
+ else
+ return BLK_EH_NOT_HANDLED;
+}
+
static void qla4xxx_recovery_timedout(struct iscsi_cls_session *session)
{
struct ddb_entry *ddb_entry = session->dd_data;
/* Flush any pending ddb changed AENs */
qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS);
+ qla4xxx_flush_active_srbs(ha);
+
/* Reset the firmware. If successful, function
* returns with ISP interrupts enabled.
*/
- if (status == QLA_SUCCESS) {
- DEBUG2(printk("scsi%ld: %s - Performing soft reset..\n",
- ha->host_no, __func__));
- qla4xxx_flush_active_srbs(ha);
- if (ql4xxx_lock_drvr_wait(ha) == QLA_SUCCESS)
- status = qla4xxx_soft_reset(ha);
- else
- status = QLA_ERROR;
- }
+ DEBUG2(printk("scsi%ld: %s - Performing soft reset..\n",
+ ha->host_no, __func__));
+ if (ql4xxx_lock_drvr_wait(ha) == QLA_SUCCESS)
+ status = qla4xxx_soft_reset(ha);
+ else
+ status = QLA_ERROR;
/* Flush any pending ddb changed AENs */
qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS);
{
struct scsi_qla_host *ha = to_qla_host(cmd->device->host);
struct ddb_entry *ddb_entry = cmd->device->hostdata;
- struct srb *sp;
int ret = FAILED, stat;
- sp = (struct srb *) cmd->SCp.ptr;
- if (!sp || !ddb_entry)
+ if (!ddb_entry)
return ret;
dev_info(&ha->pdev->dev,
ha = (struct scsi_qla_host *) cmd->device->host->hostdata;
dev_info(&ha->pdev->dev,
- "scsi(%ld:%d:%d:%d): ADAPTER RESET ISSUED.\n", ha->host_no,
+ "scsi(%ld:%d:%d:%d): HOST RESET ISSUED.\n", ha->host_no,
cmd->device->channel, cmd->device->id, cmd->device->lun);
if (qla4xxx_wait_for_hba_online(ha) != QLA_SUCCESS) {
* See LICENSE.qla4xxx for copyright and licensing details.
*/
-#define QLA4XXX_DRIVER_VERSION "5.01.00-k8"
+#define QLA4XXX_DRIVER_VERSION "5.01.00-k9"
struct iscsi_uevent *ev;
int len = NLMSG_SPACE(sizeof(*ev) + data_size);
- skb = alloc_skb(len, GFP_NOIO);
+ skb = alloc_skb(len, GFP_ATOMIC);
if (!skb) {
printk(KERN_ERR "can not deliver iscsi offload message:OOM\n");
return -ENOMEM;
memcpy((char *)ev + sizeof(*ev), data, data_size);
- return iscsi_multicast_skb(skb, ISCSI_NL_GRP_UIP, GFP_NOIO);
+ return iscsi_multicast_skb(skb, ISCSI_NL_GRP_UIP, GFP_ATOMIC);
}
EXPORT_SYMBOL_GPL(iscsi_offload_mesg);
kfree(buffer);
}
+static int sd_try_extended_inquiry(struct scsi_device *sdp)
+{
+ /*
+ * Although VPD inquiries can go to SCSI-2 type devices,
+ * some USB ones crash on receiving them, and the pages
+ * we currently ask for are for SPC-3 and beyond
+ */
+ if (sdp->scsi_level > SCSI_SPC_2)
+ return 1;
+ return 0;
+}
+
/**
* sd_revalidate_disk - called the first time a new disk is seen,
* performs disk spin up, read_capacity, etc.
*/
if (sdkp->media_present) {
sd_read_capacity(sdkp, buffer);
- sd_read_block_limits(sdkp);
- sd_read_block_characteristics(sdkp);
+
+ if (sd_try_extended_inquiry(sdp)) {
+ sd_read_block_limits(sdkp);
+ sd_read_block_characteristics(sdkp);
+ }
+
sd_read_write_protect_flag(sdkp, buffer);
sd_read_cache_type(sdkp, buffer);
sd_read_app_tag_own(sdkp, buffer);
config SERIAL_S3C6400
tristate "Samsung S3C6400/S3C6410 Serial port support"
- depends on SERIAL_SAMSUNG && (CPU_S3C600 || CPU_S3C6410)
+ depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410)
default y
help
Serial port support for the Samsung S3C6400 and S3C6410
if (ret)
goto err_add_port;
+#ifdef CONFIG_SERIAL_ATMEL_CONSOLE
if (atmel_is_console_port(&port->uart)
&& ATMEL_CONSOLE_DEVICE->flags & CON_ENABLED) {
/*
*/
clk_disable(port->clk);
}
+#endif
device_init_wakeup(&pdev->dev, 1);
platform_set_drvdata(pdev, port);
int retval;
pr_debug("%s enter\n", __func__);
- memset(buffer, 20, '\0');
snprintf(buffer, 20, "%s rx", up->name);
retval = request_irq(up->rx_irq, sport_uart_rx_irq, IRQF_SAMPLE_RANDOM, buffer, up);
if (retval) {
memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) +
L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize);
if (is_con) {
- mem_addr = alloc_bootmem(memsz);
+ mem_addr = kzalloc(memsz, GFP_NOWAIT);
dma_addr = virt_to_bus(mem_addr);
}
else
}
static struct platform_driver msm_platform_driver = {
- .probe = msm_serial_probe,
.remove = msm_serial_remove,
.driver = {
.name = "msm_serial",
return s3c24xx_serial_probe(dev, &s3c2400_uart_inf);
}
-static struct platform_driver s3c2400_serial_drv = {
+static struct platform_driver s3c2400_serial_driver = {
.probe = s3c2400_serial_probe,
.remove = __devexit_p(s3c24xx_serial_remove),
.driver = {
},
};
-s3c24xx_console_init(&s3c2400_serial_drv, &s3c2400_uart_inf);
+s3c24xx_console_init(&s3c2400_serial_driver, &s3c2400_uart_inf);
static inline int s3c2400_serial_init(void)
{
- return s3c24xx_serial_init(&s3c2400_serial_drv, &s3c2400_uart_inf);
+ return s3c24xx_serial_init(&s3c2400_serial_driver, &s3c2400_uart_inf);
}
static inline void s3c2400_serial_exit(void)
{
- platform_driver_unregister(&s3c2400_serial_drv);
+ platform_driver_unregister(&s3c2400_serial_driver);
}
module_init(s3c2400_serial_init);
return s3c24xx_serial_probe(dev, &s3c2410_uart_inf);
}
-static struct platform_driver s3c2410_serial_drv = {
+static struct platform_driver s3c2410_serial_driver = {
.probe = s3c2410_serial_probe,
.remove = __devexit_p(s3c24xx_serial_remove),
.driver = {
},
};
-s3c24xx_console_init(&s3c2410_serial_drv, &s3c2410_uart_inf);
+s3c24xx_console_init(&s3c2410_serial_driver, &s3c2410_uart_inf);
static int __init s3c2410_serial_init(void)
{
- return s3c24xx_serial_init(&s3c2410_serial_drv, &s3c2410_uart_inf);
+ return s3c24xx_serial_init(&s3c2410_serial_driver, &s3c2410_uart_inf);
}
static void __exit s3c2410_serial_exit(void)
{
- platform_driver_unregister(&s3c2410_serial_drv);
+ platform_driver_unregister(&s3c2410_serial_driver);
}
module_init(s3c2410_serial_init);
return s3c24xx_serial_probe(dev, &s3c2412_uart_inf);
}
-static struct platform_driver s3c2412_serial_drv = {
+static struct platform_driver s3c2412_serial_driver = {
.probe = s3c2412_serial_probe,
.remove = __devexit_p(s3c24xx_serial_remove),
.driver = {
},
};
-s3c24xx_console_init(&s3c2412_serial_drv, &s3c2412_uart_inf);
+s3c24xx_console_init(&s3c2412_serial_driver, &s3c2412_uart_inf);
static inline int s3c2412_serial_init(void)
{
- return s3c24xx_serial_init(&s3c2412_serial_drv, &s3c2412_uart_inf);
+ return s3c24xx_serial_init(&s3c2412_serial_driver, &s3c2412_uart_inf);
}
static inline void s3c2412_serial_exit(void)
{
- platform_driver_unregister(&s3c2412_serial_drv);
+ platform_driver_unregister(&s3c2412_serial_driver);
}
module_init(s3c2412_serial_init);
return s3c24xx_serial_probe(dev, &s3c2440_uart_inf);
}
-static struct platform_driver s3c2440_serial_drv = {
+static struct platform_driver s3c2440_serial_driver = {
.probe = s3c2440_serial_probe,
.remove = __devexit_p(s3c24xx_serial_remove),
.driver = {
},
};
-s3c24xx_console_init(&s3c2440_serial_drv, &s3c2440_uart_inf);
+s3c24xx_console_init(&s3c2440_serial_driver, &s3c2440_uart_inf);
static int __init s3c2440_serial_init(void)
{
- return s3c24xx_serial_init(&s3c2440_serial_drv, &s3c2440_uart_inf);
+ return s3c24xx_serial_init(&s3c2440_serial_driver, &s3c2440_uart_inf);
}
static void __exit s3c2440_serial_exit(void)
{
- platform_driver_unregister(&s3c2440_serial_drv);
+ platform_driver_unregister(&s3c2440_serial_driver);
}
module_init(s3c2440_serial_init);
return s3c24xx_serial_probe(dev, &s3c24a0_uart_inf);
}
-static struct platform_driver s3c24a0_serial_drv = {
+static struct platform_driver s3c24a0_serial_driver = {
.probe = s3c24a0_serial_probe,
.remove = __devexit_p(s3c24xx_serial_remove),
.driver = {
},
};
-s3c24xx_console_init(&s3c24a0_serial_drv, &s3c24a0_uart_inf);
+s3c24xx_console_init(&s3c24a0_serial_driver, &s3c24a0_uart_inf);
static int __init s3c24a0_serial_init(void)
{
- return s3c24xx_serial_init(&s3c24a0_serial_drv, &s3c24a0_uart_inf);
+ return s3c24xx_serial_init(&s3c24a0_serial_driver, &s3c24a0_uart_inf);
}
static void __exit s3c24a0_serial_exit(void)
{
- platform_driver_unregister(&s3c24a0_serial_drv);
+ platform_driver_unregister(&s3c24a0_serial_driver);
}
module_init(s3c24a0_serial_init);
return s3c24xx_serial_probe(dev, &s3c6400_uart_inf);
}
-static struct platform_driver s3c6400_serial_drv = {
+static struct platform_driver s3c6400_serial_driver = {
.probe = s3c6400_serial_probe,
.remove = __devexit_p(s3c24xx_serial_remove),
.driver = {
},
};
-s3c24xx_console_init(&s3c6400_serial_drv, &s3c6400_uart_inf);
+s3c24xx_console_init(&s3c6400_serial_driver, &s3c6400_uart_inf);
static int __init s3c6400_serial_init(void)
{
- return s3c24xx_serial_init(&s3c6400_serial_drv, &s3c6400_uart_inf);
+ return s3c24xx_serial_init(&s3c6400_serial_driver, &s3c6400_uart_inf);
}
static void __exit s3c6400_serial_exit(void)
{
- platform_driver_unregister(&s3c6400_serial_drv);
+ platform_driver_unregister(&s3c6400_serial_driver);
}
module_init(s3c6400_serial_init);
.mapbase = KS8695_UART_VA,
.iotype = SERIAL_IO_MEM,
.irq = KS8695_IRQ_UART_TX,
- .uartclk = CLOCK_TICK_RATE * 16,
+ .uartclk = KS8695_CLOCK_RATE * 16,
.fifosize = 16,
.ops = &ks8695uart_pops,
.flags = ASYNC_BOOT_AUTOCONF,
/* per-register bitmasks: */
+#define OMAP2_MCSPI_SYSCONFIG_SMARTIDLE (2 << 3)
+#define OMAP2_MCSPI_SYSCONFIG_ENAWAKEUP (1 << 2)
#define OMAP2_MCSPI_SYSCONFIG_AUTOIDLE (1 << 0)
#define OMAP2_MCSPI_SYSCONFIG_SOFTRESET (1 << 1)
#define OMAP2_MCSPI_CHCTRL_EN (1 << 0)
+#define OMAP2_MCSPI_WAKEUPENABLE_WKEN (1 << 0)
/* We have 2 DMA channels per CS, one for RX and one for TX */
struct omap2_mcspi_dma {
if (rx != NULL) {
omap_set_dma_transfer_params(mcspi_dma->dma_rx_channel,
- data_type, element_count, 1,
+ data_type, element_count - 1, 1,
OMAP_DMA_SYNC_ELEMENT,
mcspi_dma->dma_rx_sync_dev, 1);
if (rx != NULL) {
wait_for_completion(&mcspi_dma->dma_rx_completion);
dma_unmap_single(NULL, xfer->rx_dma, count, DMA_FROM_DEVICE);
+ omap2_mcspi_set_enable(spi, 0);
+ if (likely(mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHSTAT0)
+ & OMAP2_MCSPI_CHSTAT_RXS)) {
+ u32 w;
+
+ w = mcspi_read_cs_reg(spi, OMAP2_MCSPI_RX0);
+ if (word_len <= 8)
+ ((u8 *)xfer->rx_buf)[element_count - 1] = w;
+ else if (word_len <= 16)
+ ((u16 *)xfer->rx_buf)[element_count - 1] = w;
+ else /* word_len <= 32 */
+ ((u32 *)xfer->rx_buf)[element_count - 1] = w;
+ } else {
+ dev_err(&spi->dev, "DMA RX last word empty");
+ count -= (word_len <= 8) ? 1 :
+ (word_len <= 16) ? 2 :
+ /* word_len <= 32 */ 4;
+ }
+ omap2_mcspi_set_enable(spi, 1);
}
return count;
}
} while (!(tmp & OMAP2_MCSPI_SYSSTATUS_RESETDONE));
mcspi_write_reg(master, OMAP2_MCSPI_SYSCONFIG,
- /* (3 << 8) | (2 << 3) | */
- OMAP2_MCSPI_SYSCONFIG_AUTOIDLE);
+ OMAP2_MCSPI_SYSCONFIG_AUTOIDLE |
+ OMAP2_MCSPI_SYSCONFIG_ENAWAKEUP |
+ OMAP2_MCSPI_SYSCONFIG_SMARTIDLE);
+
+ mcspi_write_reg(master, OMAP2_MCSPI_WAKEUPENABLE,
+ OMAP2_MCSPI_WAKEUPENABLE_WKEN);
omap2_mcspi_set_master_mode(master);
unsigned int bpw;
unsigned int hz;
unsigned int div;
+ unsigned long clk;
bpw = t ? t->bits_per_word : spi->bits_per_word;
hz = t ? t->speed_hz : spi->max_speed_hz;
+ if (!bpw)
+ bpw = 8;
+
+ if (!hz)
+ hz = spi->max_speed_hz;
+
if (bpw != 8) {
dev_err(&spi->dev, "invalid bits-per-word (%d)\n", bpw);
return -EINVAL;
}
- div = clk_get_rate(hw->clk) / hz;
-
- /* is clk = pclk / (2 * (pre+1)), or is it
- * clk = (pclk * 2) / ( pre + 1) */
-
- div /= 2;
-
- if (div > 0)
- div -= 1;
+ clk = clk_get_rate(hw->clk);
+ div = DIV_ROUND_UP(clk, hz * 2) - 1;
if (div > 255)
div = 255;
- dev_dbg(&spi->dev, "setting pre-scaler to %d (hz %d)\n", div, hz);
+ dev_dbg(&spi->dev, "setting pre-scaler to %d (wanted %d, got %ld)\n",
+ div, hz, clk / (2 * (div + 1)));
+
+
writeb(div, hw->regs + S3C2410_SPPRE);
spin_lock(&hw->bitbang.lock);
source "drivers/staging/stlc45xx/Kconfig"
-source "drivers/staging/uc2322/Kconfig"
-
source "drivers/staging/b3dfg/Kconfig"
source "drivers/staging/phison/Kconfig"
obj-$(CONFIG_DST) += dst/
obj-$(CONFIG_POHMELFS) += pohmelfs/
obj-$(CONFIG_STLC45XX) += stlc45xx/
-obj-$(CONFIG_USB_SERIAL_ATEN2011) += uc2322/
obj-$(CONFIG_B3DFG) += b3dfg/
obj-$(CONFIG_IDE_PHISON) += phison/
obj-$(CONFIG_PLAN9AUTH) += p9auth/
read_lock(&tasklist_lock);
for_each_process(p) {
+ struct mm_struct *mm;
int oom_adj;
task_lock(p);
- if (!p->mm) {
+ mm = p->mm;
+ if (!mm) {
task_unlock(p);
continue;
}
- oom_adj = p->oomkilladj;
+ oom_adj = mm->oom_adj;
if (oom_adj < min_adj) {
task_unlock(p);
continue;
}
- tasksize = get_mm_rss(p->mm);
+ tasksize = get_mm_rss(mm);
task_unlock(p);
if (tasksize <= 0)
continue;
config B3DFG
tristate "Brontes 3d Frame Framegrabber"
+ depends on PCI
default n
---help---
This driver provides support for the Brontes 3d Framegrabber
mutex_lock(&dev->mutex);
if (dev->attached)
goto ok;
- if (!capable(CAP_SYS_MODULE) && dev->in_request_module) {
+ if (!capable(CAP_NET_ADMIN) && dev->in_request_module) {
DPRINTK("in request module\n");
mutex_unlock(&dev->mutex);
return -ENODEV;
}
- if (capable(CAP_SYS_MODULE) && dev->in_request_module)
+ if (capable(CAP_NET_ADMIN) && dev->in_request_module)
goto ok;
dev->in_request_module = 1;
dev->in_request_module = 0;
- if (!dev->attached && !capable(CAP_SYS_MODULE)) {
- DPRINTK("not attached and not CAP_SYS_MODULE\n");
+ if (!dev->attached && !capable(CAP_NET_ADMIN)) {
+ DPRINTK("not attached and not CAP_NET_ADMIN\n");
mutex_unlock(&dev->mutex);
return -ENODEV;
}
config HECI
tristate "Intel Management Engine Interface (MEI) Support"
+ depends on PCI
---help---
The Intel Management Engine Interface (Intel MEI) driver allows
applications to access the Active Management Technology
*/
static void pohmelfs_kill_super(struct super_block *sb)
{
- struct writeback_control wbc = {
- .sync_mode = WB_SYNC_ALL,
- .range_start = 0,
- .range_end = LLONG_MAX,
- .nr_to_write = LONG_MAX,
- };
- generic_sync_sb_inodes(sb, &wbc);
-
+ sync_inodes_sb(sb);
kill_anon_super(sb);
}
pdx->PixelUrb[frameInfo][i]->transfer_flags =
URB_NO_TRANSFER_DMA_MAP | URB_NO_INTERRUPT;
}
+ if (i == 0)
+ return -EINVAL;
/* only interrupt when last URB completes */
pdx->PixelUrb[frameInfo][--i]->transfer_flags &= ~URB_NO_INTERRUPT;
pdx->pendedPixelUrbs[frameInfo] =
#include "rtmp_type.h"
#include <linux/module.h>
#include <linux/kernel.h>
-#if !defined(RT2860) && !defined(RT30xx)
-#include <linux/kthread.h>
-#endif
#include <linux/spinlock.h>
#include <linux/init.h>
#ifndef RT30xx
typedef struct pid * THREAD_PID;
-#ifdef RT2860
#define THREAD_PID_INIT_VALUE NULL
-#endif
#define GET_PID(_v) find_get_pid(_v)
#define GET_PID_NUMBER(_v) pid_nr(_v)
#define CHECK_PID_LEGALITY(_pid) if (pid_nr(_pid) >= 0)
dma_addr_t pAd_pa;
#endif
#ifdef RT2870
- struct usb_device *pUsb_Dev;
+ struct usb_device *pUsb_Dev;
#ifndef RT30xx
- struct task_struct *MLMEThr_task;
- struct task_struct *RTUSBCmdThr_task;
- struct task_struct *TimerQThr_task;
+ THREAD_PID MLMEThr_pid;
+ THREAD_PID RTUSBCmdThr_pid;
+ THREAD_PID TimerQThr_pid;
#endif
#ifdef RT30xx
struct pid *MLMEThr_pid;
DBGPRINT(RT_DEBUG_TRACE,( "<---%s\n",__func__));
#ifndef RT30xx
- pObj->MLMEThr_task = NULL;
+ pObj->MLMEThr_pid = THREAD_PID_INIT_VALUE;
#endif
#ifdef RT30xx
pObj->MLMEThr_pid = NULL;
DBGPRINT(RT_DEBUG_TRACE,( "<---RTUSBCmdThread\n"));
#ifndef RT30xx
- pObj->RTUSBCmdThr_task = NULL;
+ pObj->RTUSBCmdThr_pid = THREAD_PID_INIT_VALUE;
#endif
#ifdef RT30xx
pObj->RTUSBCmdThr_pid = NULL;
DBGPRINT(RT_DEBUG_TRACE,( "<---%s\n",__func__));
#ifndef RT30xx
- pObj->TimerQThr_task = NULL;
+ pObj->TimerQThr_pid = THREAD_PID_INIT_VALUE;
#endif
#ifdef RT30xx
pObj->TimerQThr_pid = NULL;
// Terminate Threads
#ifndef RT30xx
- BUG_ON(pObj->TimerQThr_task == NULL);
- CHECK_PID_LEGALITY(task_pid(pObj->TimerQThr_task))
+ CHECK_PID_LEGALITY(pObj->TimerQThr_pid)
{
POS_COOKIE pObj = (POS_COOKIE)pAd->OS_Cookie;
- printk(KERN_DEBUG "Terminate the TimerQThr pid=%d!\n",
- pid_nr(task_pid(pObj->TimerQThr_task)));
+ printk("Terminate the TimerQThr_pid=%d!\n", GET_PID_NUMBER(pObj->TimerQThr_pid));
mb();
pAd->TimerFunc_kill = 1;
mb();
- kthread_stop(pObj->TimerQThr_task);
- pObj->TimerQThr_task = NULL;
+ ret = KILL_THREAD_PID(pObj->TimerQThr_pid, SIGTERM, 1);
+ if (ret)
+ {
+ printk(KERN_WARNING "%s: unable to stop TimerQThread, pid=%d, ret=%d!\n",
+ pAd->net_dev->name, GET_PID_NUMBER(pObj->TimerQThr_pid), ret);
+ }
+ else
+ {
+ wait_for_completion(&pAd->TimerQComplete);
+ pObj->TimerQThr_pid = THREAD_PID_INIT_VALUE;
+ }
}
- BUG_ON(pObj->MLMEThr_task == NULL);
- CHECK_PID_LEGALITY(task_pid(pObj->MLMEThr_task))
+ CHECK_PID_LEGALITY(pObj->MLMEThr_pid)
{
- printk(KERN_DEBUG "Terminate the MLMEThr pid=%d!\n",
- pid_nr(task_pid(pObj->MLMEThr_task)));
+ printk("Terminate the MLMEThr_pid=%d!\n", GET_PID_NUMBER(pObj->MLMEThr_pid));
mb();
pAd->mlme_kill = 1;
//RT28XX_MLME_HANDLER(pAd);
mb();
- kthread_stop(pObj->MLMEThr_task);
- pObj->MLMEThr_task = NULL;
+ ret = KILL_THREAD_PID(pObj->MLMEThr_pid, SIGTERM, 1);
+ if (ret)
+ {
+ printk (KERN_WARNING "%s: unable to Mlme thread, pid=%d, ret=%d!\n",
+ pAd->net_dev->name, GET_PID_NUMBER(pObj->MLMEThr_pid), ret);
+ }
+ else
+ {
+ //wait_for_completion (&pAd->notify);
+ wait_for_completion (&pAd->mlmeComplete);
+ pObj->MLMEThr_pid = THREAD_PID_INIT_VALUE;
+ }
}
- BUG_ON(pObj->RTUSBCmdThr_task == NULL);
- CHECK_PID_LEGALITY(task_pid(pObj->RTUSBCmdThr_task))
+ CHECK_PID_LEGALITY(pObj->RTUSBCmdThr_pid)
{
- printk(KERN_DEBUG "Terminate the RTUSBCmdThr pid=%d!\n",
- pid_nr(task_pid(pObj->RTUSBCmdThr_task)));
+ printk("Terminate the RTUSBCmdThr_pid=%d!\n", GET_PID_NUMBER(pObj->RTUSBCmdThr_pid));
mb();
NdisAcquireSpinLock(&pAd->CmdQLock);
pAd->CmdQ.CmdQState = RT2870_THREAD_STOPED;
NdisReleaseSpinLock(&pAd->CmdQLock);
mb();
//RTUSBCMDUp(pAd);
- kthread_stop(pObj->RTUSBCmdThr_task);
- pObj->RTUSBCmdThr_task = NULL;
+ ret = KILL_THREAD_PID(pObj->RTUSBCmdThr_pid, SIGTERM, 1);
+ if (ret)
+ {
+ printk(KERN_WARNING "%s: unable to RTUSBCmd thread, pid=%d, ret=%d!\n",
+ pAd->net_dev->name, GET_PID_NUMBER(pObj->RTUSBCmdThr_pid), ret);
+ }
+ else
+ {
+ //wait_for_completion (&pAd->notify);
+ wait_for_completion (&pAd->CmdQComplete);
+ pObj->RTUSBCmdThr_pid = THREAD_PID_INIT_VALUE;
+ }
}
#endif
#ifdef RT30xx
dev_p->descriptor.idProduct == rtusb_usb_id[i].idProduct)
{
#ifndef RT30xx
- printk(KERN_DEBUG "rt2870: idVendor = 0x%x, idProduct = 0x%x\n",
+ printk("rt2870: idVendor = 0x%x, idProduct = 0x%x\n",
#endif
#ifdef RT30xx
printk("rt2870: idVendor = 0x%x, idProduct = 0x%x\n",
usb_dev = pObj->pUsb_Dev;
#ifndef RT30xx
- pObj->MLMEThr_task = NULL;
- pObj->RTUSBCmdThr_task = NULL;
+ pObj->MLMEThr_pid = THREAD_PID_INIT_VALUE;
+ pObj->RTUSBCmdThr_pid = THREAD_PID_INIT_VALUE;
#endif
#ifdef RT30xx
pObj->MLMEThr_pid = NULL;
PRTMP_ADAPTER pAd = net_dev->ml_priv;
POS_COOKIE pObj = (POS_COOKIE) pAd->OS_Cookie;
#ifndef RT30xx
- struct task_struct *tsk;
+ pid_t pid_number = -1;
#endif
#ifdef RT30xx
pid_t pid_number;
// Creat MLME Thread
#ifndef RT30xx
- pObj->MLMEThr_task = NULL;
- tsk = kthread_run(MlmeThread, pAd, "%s", pAd->net_dev->name);
-
- if (IS_ERR(tsk)) {
+ pObj->MLMEThr_pid= THREAD_PID_INIT_VALUE;
+ pid_number = kernel_thread(MlmeThread, pAd, CLONE_VM);
+ if (pid_number < 0)
+ {
#endif
#ifdef RT30xx
pObj->MLMEThr_pid = NULL;
}
#ifndef RT30xx
- pObj->MLMEThr_task = tsk;
+ pObj->MLMEThr_pid = GET_PID(pid_number);
#endif
#ifdef RT30xx
pObj->MLMEThr_pid = find_get_pid(pid_number);
// Creat Command Thread
#ifndef RT30xx
- pObj->RTUSBCmdThr_task = NULL;
- tsk = kthread_run(RTUSBCmdThread, pAd, "%s", pAd->net_dev->name);
-
- if (IS_ERR(tsk) < 0)
+ pObj->RTUSBCmdThr_pid= THREAD_PID_INIT_VALUE;
+ pid_number = kernel_thread(RTUSBCmdThread, pAd, CLONE_VM);
+ if (pid_number < 0)
#endif
#ifdef RT30xx
pObj->RTUSBCmdThr_pid = NULL;
}
#ifndef RT30xx
- pObj->RTUSBCmdThr_task = tsk;
+ pObj->RTUSBCmdThr_pid = GET_PID(pid_number);
#endif
#ifdef RT30xx
pObj->RTUSBCmdThr_pid = find_get_pid(pid_number);
wait_for_completion(&(pAd->CmdQComplete));
#ifndef RT30xx
- pObj->TimerQThr_task = NULL;
- tsk = kthread_run(TimerQThread, pAd, "%s", pAd->net_dev->name);
- if (IS_ERR(tsk) < 0)
+ pObj->TimerQThr_pid= THREAD_PID_INIT_VALUE;
+ pid_number = kernel_thread(TimerQThread, pAd, CLONE_VM);
+ if (pid_number < 0)
#endif
#ifdef RT30xx
pObj->TimerQThr_pid = NULL;
return NDIS_STATUS_FAILURE;
}
#ifndef RT30xx
- pObj->TimerQThr_task = tsk;
+ pObj->TimerQThr_pid = GET_PID(pid_number);
#endif
#ifdef RT30xx
pObj->TimerQThr_pid = find_get_pid(pid_number);
POS_COOKIE pObj = (POS_COOKIE) pAd->OS_Cookie;
#ifndef RT30xx
- BUG_ON(pObj->RTUSBCmdThr_task == NULL);
- CHECK_PID_LEGALITY(task_pid(pObj->RTUSBCmdThr_task))
+ CHECK_PID_LEGALITY(pObj->RTUSBCmdThr_pid)
#endif
#ifdef RT30xx
if (pObj->RTUSBCmdThr_pid < 0)
{ \
{USB_DEVICE(0x148F,0x2770)}, /* Ralink */ \
{USB_DEVICE(0x1737,0x0071)}, /* Linksys WUSB600N */ \
+ {USB_DEVICE(0x1737,0x0070)}, /* Linksys */ \
{USB_DEVICE(0x148F,0x2870)}, /* Ralink */ \
{USB_DEVICE(0x148F,0x3070)}, /* Ralink */ \
{USB_DEVICE(0x0B05,0x1731)}, /* Asus */ \
{USB_DEVICE(0x14B2,0x3C06)}, /* Conceptronic */ \
{USB_DEVICE(0x14B2,0x3C28)}, /* Conceptronic */ \
{USB_DEVICE(0x2019,0xED06)}, /* Planex Communications, Inc. */ \
+ {USB_DEVICE(0x2019,0xED14)}, /* Planex Communications, Inc. */ \
{USB_DEVICE(0x2019,0xAB25)}, /* Planex Communications, Inc. RT3070 */ \
{USB_DEVICE(0x07D1,0x3C09)}, /* D-Link */ \
{USB_DEVICE(0x07D1,0x3C11)}, /* D-Link */ \
{USB_DEVICE(0x14B2,0x3C07)}, /* AL */ \
{USB_DEVICE(0x14B2,0x3C12)}, /* AL */ \
{USB_DEVICE(0x050D,0x8053)}, /* Belkin */ \
+ {USB_DEVICE(0x050D,0x815C)}, /* Belkin */ \
{USB_DEVICE(0x14B2,0x3C23)}, /* Airlink */ \
{USB_DEVICE(0x14B2,0x3C27)}, /* Airlink */ \
{USB_DEVICE(0x07AA,0x002F)}, /* Corega */ \
#define RTUSBMlmeUp(pAd) \
{ \
POS_COOKIE pObj = (POS_COOKIE) pAd->OS_Cookie; \
- BUG_ON(pObj->MLMEThr_task == NULL); \
- CHECK_PID_LEGALITY(task_pid(pObj->MLMEThr_task)) \
+ CHECK_PID_LEGALITY(pObj->MLMEThr_pid) \
up(&(pAd->mlme_semaphore)); \
}
#define RTUSBCMDUp(pAd) \
{ \
POS_COOKIE pObj = (POS_COOKIE) pAd->OS_Cookie; \
- BUG_ON(pObj->RTUSBCmdThr_task == NULL); \
- CHECK_PID_LEGALITY(task_pid(pObj->RTUSBCmdThr_task)) \
+ CHECK_PID_LEGALITY(pObj->RTUSBCmdThr_pid) \
up(&(pAd->RTUSBCmd_semaphore)); \
}
#endif
struct sk_buff *frag,
int hdr_len);
-extern int ieee80211_xmit(struct sk_buff *skb,
+extern int rtl8192_ieee80211_xmit(struct sk_buff *skb,
struct net_device *dev);
extern void ieee80211_txb_free(struct ieee80211_txb *);
struct sk_buff *frag,
int hdr_len);
-extern int ieee80211_xmit(struct sk_buff *skb,
+extern int rtl8192_ieee80211_xmit(struct sk_buff *skb,
struct net_device *dev);
extern void ieee80211_txb_free(struct ieee80211_txb *);
}
}
-int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
+int rtl8192_ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
{
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0))
struct ieee80211_device *ieee = netdev_priv(dev);
return 1;
}
+EXPORT_SYMBOL(rtl8192_ieee80211_xmit);
EXPORT_SYMBOL(ieee80211_txb_free);
.ndo_set_mac_address = r8192_set_mac_adr,
.ndo_validate_addr = eth_validate_addr,
.ndo_change_mtu = eth_change_mtu,
- .ndo_start_xmit = ieee80211_xmit,
+ .ndo_start_xmit = rtl8192_ieee80211_xmit,
};
#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
if (port_paranoia_check(port, __func__) != 0) {
dbg("%s - port_paranoia_check, exiting\n", __func__);
qt_port->ReadBulkStopped = 1;
- return;
+ goto exit;
}
if (!serial) {
dbg("%s - bad serial pointer, exiting\n", __func__);
- return;
+ goto exit;
}
if (qt_port->closePending == 1) {
/* Were closing , stop reading */
dbg("%s - (qt_port->closepending == 1\n", __func__);
qt_port->ReadBulkStopped = 1;
- return;
+ goto exit;
}
/*
*/
if (qt_port->RxHolding == 1) {
qt_port->ReadBulkStopped = 1;
- return;
+ goto exit;
}
if (urb->status) {
dbg("%s - nonzero read bulk status received: %d\n",
__func__, urb->status);
- return;
+ goto exit;
}
if (tty && RxCount) {
}
schedule_work(&port->work);
+exit:
+ tty_kref_put(tty);
}
/*
if (!qt_port) {
dbg("%s: kmalloc for quatech_port (%d) failed!.",
__func__, i);
+ for(--i; i >= 0; i--) {
+ port = serial->port[i];
+ kfree(usb_get_serial_port_data(port));
+ usb_set_serial_port_data(port, NULL);
+ }
return -ENOMEM;
}
spin_lock_init(&qt_port->lock);
}
}
-static void qt_close( struct usb_serial_port *port)
+static void qt_close(struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
struct quatech_port *qt_port;
/* wait up to for transmitter to empty */
if (serial->dev)
qt_block_until_empty(tty, qt_port);
+ tty_kref_put(tty);
/* Close uart channel */
status = qt_close_channel(serial, index);
+++ /dev/null
-config USB_SERIAL_ATEN2011
- tristate "ATEN 2011 USB to serial device support"
- depends on USB_SERIAL
- default N
- ---help---
- Say Y here if you want to use a ATEN 2011 dual port USB to serial
- adapter.
-
- To compile this driver as a module, choose M here: the module will be
- called aten2011.
+++ /dev/null
-obj-$(CONFIG_USB_SERIAL_ATEN2011) += aten2011.o
+++ /dev/null
-TODO:
- - checkpatch.pl cleanups
- - remove dead and useless code (auditing the tty ioctls to
- verify that they really are correct and needed.)
-
-Please send any patches to Greg Kroah-Hartman <greg@kroah.com> and
-Russell Lang <gsview@ghostgum.com.au>.
+++ /dev/null
-/*
- * Aten 2011 USB serial driver for 4 port devices
- *
- * Copyright (C) 2000 Inside Out Networks
- * Copyright (C) 2001-2002, 2009 Greg Kroah-Hartman <greg@kroah.com>
- * Copyright (C) 2009 Novell Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/tty.h>
-#include <linux/tty_driver.h>
-#include <linux/tty_flip.h>
-#include <linux/module.h>
-#include <linux/serial.h>
-#include <linux/uaccess.h>
-#include <linux/usb.h>
-#include <linux/usb/serial.h>
-
-
-#define ZLP_REG1 0x3A /* Zero_Flag_Reg1 58 */
-#define ZLP_REG2 0x3B /* Zero_Flag_Reg2 59 */
-#define ZLP_REG3 0x3C /* Zero_Flag_Reg3 60 */
-#define ZLP_REG4 0x3D /* Zero_Flag_Reg4 61 */
-#define ZLP_REG5 0x3E /* Zero_Flag_Reg5 62 */
-
-/* Interrupt Rotinue Defines */
-#define SERIAL_IIR_RLS 0x06
-#define SERIAL_IIR_RDA 0x04
-#define SERIAL_IIR_CTI 0x0c
-#define SERIAL_IIR_THR 0x02
-#define SERIAL_IIR_MS 0x00
-
-/* Emulation of the bit mask on the LINE STATUS REGISTER. */
-#define SERIAL_LSR_DR 0x0001
-#define SERIAL_LSR_OE 0x0002
-#define SERIAL_LSR_PE 0x0004
-#define SERIAL_LSR_FE 0x0008
-#define SERIAL_LSR_BI 0x0010
-#define SERIAL_LSR_THRE 0x0020
-#define SERIAL_LSR_TEMT 0x0040
-#define SERIAL_LSR_FIFOERR 0x0080
-
-/* MSR bit defines(place holders) */
-#define ATEN_MSR_DELTA_CTS 0x10
-#define ATEN_MSR_DELTA_DSR 0x20
-#define ATEN_MSR_DELTA_RI 0x40
-#define ATEN_MSR_DELTA_CD 0x80
-
-/* Serial Port register Address */
-#define RECEIVE_BUFFER_REGISTER ((__u16)(0x00))
-#define TRANSMIT_HOLDING_REGISTER ((__u16)(0x00))
-#define INTERRUPT_ENABLE_REGISTER ((__u16)(0x01))
-#define INTERRUPT_IDENT_REGISTER ((__u16)(0x02))
-#define FIFO_CONTROL_REGISTER ((__u16)(0x02))
-#define LINE_CONTROL_REGISTER ((__u16)(0x03))
-#define MODEM_CONTROL_REGISTER ((__u16)(0x04))
-#define LINE_STATUS_REGISTER ((__u16)(0x05))
-#define MODEM_STATUS_REGISTER ((__u16)(0x06))
-#define SCRATCH_PAD_REGISTER ((__u16)(0x07))
-#define DIVISOR_LATCH_LSB ((__u16)(0x00))
-#define DIVISOR_LATCH_MSB ((__u16)(0x01))
-
-#define SP1_REGISTER ((__u16)(0x00))
-#define CONTROL1_REGISTER ((__u16)(0x01))
-#define CLK_MULTI_REGISTER ((__u16)(0x02))
-#define CLK_START_VALUE_REGISTER ((__u16)(0x03))
-#define DCR1_REGISTER ((__u16)(0x04))
-#define GPIO_REGISTER ((__u16)(0x07))
-
-#define SERIAL_LCR_DLAB ((__u16)(0x0080))
-
-/*
- * URB POOL related defines
- */
-#define NUM_URBS 16 /* URB Count */
-#define URB_TRANSFER_BUFFER_SIZE 32 /* URB Size */
-
-#define USB_VENDOR_ID_ATENINTL 0x0557
-#define ATENINTL_DEVICE_ID_2011 0x2011
-#define ATENINTL_DEVICE_ID_7820 0x7820
-
-static struct usb_device_id id_table[] = {
- { USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_2011) },
- { USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_7820) },
- { } /* terminating entry */
-};
-MODULE_DEVICE_TABLE(usb, id_table);
-
-/* This structure holds all of the local port information */
-struct ATENINTL_port {
- int port_num; /*Actual port number in the device(1,2,etc)*/
- __u8 bulk_out_endpoint; /* the bulk out endpoint handle */
- unsigned char *bulk_out_buffer; /* buffer used for the bulk out endpoint */
- struct urb *write_urb; /* write URB for this port */
- __u8 bulk_in_endpoint; /* the bulk in endpoint handle */
- unsigned char *bulk_in_buffer; /* the buffer we use for the bulk in endpoint */
- struct urb *read_urb; /* read URB for this port */
- __u8 shadowLCR; /* last LCR value received */
- __u8 shadowMCR; /* last MCR value received */
- char open;
- char chaseResponsePending;
- wait_queue_head_t wait_chase; /* for handling sleeping while waiting for chase to finish */
- wait_queue_head_t wait_command; /* for handling sleeping while waiting for command to finish */
- struct async_icount icount;
- struct usb_serial_port *port; /* loop back to the owner of this object */
- /*Offsets*/
- __u8 SpRegOffset;
- __u8 ControlRegOffset;
- __u8 DcrRegOffset;
- /* for processing control URBS in interrupt context */
- struct urb *control_urb;
- char *ctrl_buf;
- int MsrLsr;
-
- struct urb *write_urb_pool[NUM_URBS];
- /* we pass a pointer to this as the arguement sent to cypress_set_termios old_termios */
- struct ktermios tmp_termios; /* stores the old termios settings */
- spinlock_t lock; /* private lock */
-};
-
-/* This structure holds all of the individual serial device information */
-struct ATENINTL_serial {
- __u8 interrupt_in_endpoint; /* the interrupt endpoint handle */
- unsigned char *interrupt_in_buffer; /* the buffer we use for the interrupt endpoint */
- struct urb *interrupt_read_urb; /* our interrupt urb */
- __u8 bulk_in_endpoint; /* the bulk in endpoint handle */
- unsigned char *bulk_in_buffer; /* the buffer we use for the bulk in endpoint */
- struct urb *read_urb; /* our bulk read urb */
- __u8 bulk_out_endpoint; /* the bulk out endpoint handle */
- struct usb_serial *serial; /* loop back to the owner of this object */
- int ATEN2011_spectrum_2or4ports; /* this says the number of ports in the device */
- /* Indicates about the no.of opened ports of an individual USB-serial adapater. */
- unsigned int NoOfOpenPorts;
- /* a flag for Status endpoint polling */
- unsigned char status_polling_started;
-};
-
-static void ATEN2011_set_termios(struct tty_struct *tty,
- struct usb_serial_port *port,
- struct ktermios *old_termios);
-static void ATEN2011_change_port_settings(struct tty_struct *tty,
- struct ATENINTL_port *ATEN2011_port,
- struct ktermios *old_termios);
-
-/*************************************
- * Bit definitions for each register *
- *************************************/
-#define LCR_BITS_5 0x00 /* 5 bits/char */
-#define LCR_BITS_6 0x01 /* 6 bits/char */
-#define LCR_BITS_7 0x02 /* 7 bits/char */
-#define LCR_BITS_8 0x03 /* 8 bits/char */
-#define LCR_BITS_MASK 0x03 /* Mask for bits/char field */
-
-#define LCR_STOP_1 0x00 /* 1 stop bit */
-#define LCR_STOP_1_5 0x04 /* 1.5 stop bits (if 5 bits/char) */
-#define LCR_STOP_2 0x04 /* 2 stop bits (if 6-8 bits/char) */
-#define LCR_STOP_MASK 0x04 /* Mask for stop bits field */
-
-#define LCR_PAR_NONE 0x00 /* No parity */
-#define LCR_PAR_ODD 0x08 /* Odd parity */
-#define LCR_PAR_EVEN 0x18 /* Even parity */
-#define LCR_PAR_MARK 0x28 /* Force parity bit to 1 */
-#define LCR_PAR_SPACE 0x38 /* Force parity bit to 0 */
-#define LCR_PAR_MASK 0x38 /* Mask for parity field */
-
-#define LCR_SET_BREAK 0x40 /* Set Break condition */
-#define LCR_DL_ENABLE 0x80 /* Enable access to divisor latch */
-
-#define MCR_DTR 0x01 /* Assert DTR */
-#define MCR_RTS 0x02 /* Assert RTS */
-#define MCR_OUT1 0x04 /* Loopback only: Sets state of RI */
-#define MCR_MASTER_IE 0x08 /* Enable interrupt outputs */
-#define MCR_LOOPBACK 0x10 /* Set internal (digital) loopback mode */
-#define MCR_XON_ANY 0x20 /* Enable any char to exit XOFF mode */
-
-#define ATEN2011_MSR_CTS 0x10 /* Current state of CTS */
-#define ATEN2011_MSR_DSR 0x20 /* Current state of DSR */
-#define ATEN2011_MSR_RI 0x40 /* Current state of RI */
-#define ATEN2011_MSR_CD 0x80 /* Current state of CD */
-
-
-static int debug;
-
-/*
- * Version Information
- */
-#define DRIVER_VERSION "2.0"
-#define DRIVER_DESC "ATENINTL 2011 USB Serial Adapter"
-
-/*
- * Defines used for sending commands to port
- */
-
-#define ATEN_WDR_TIMEOUT (50) /* default urb timeout */
-
-/* Requests */
-#define ATEN_RD_RTYPE 0xC0
-#define ATEN_WR_RTYPE 0x40
-#define ATEN_RDREQ 0x0D
-#define ATEN_WRREQ 0x0E
-#define ATEN_CTRL_TIMEOUT 500
-#define VENDOR_READ_LENGTH (0x01)
-
-/* set to 1 for RS485 mode and 0 for RS232 mode */
-/* FIXME make this somehow dynamic and not build time specific */
-static int RS485mode;
-
-static int set_reg_sync(struct usb_serial_port *port, __u16 reg, __u16 val)
-{
- struct usb_device *dev = port->serial->dev;
- val = val & 0x00ff;
-
- dbg("%s: is %x, value %x", __func__, reg, val);
-
- return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), ATEN_WRREQ,
- ATEN_WR_RTYPE, val, reg, NULL, 0,
- ATEN_WDR_TIMEOUT);
-}
-
-static int get_reg_sync(struct usb_serial_port *port, __u16 reg, __u16 *val)
-{
- struct usb_device *dev = port->serial->dev;
- int ret;
-
- ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), ATEN_RDREQ,
- ATEN_RD_RTYPE, 0, reg, val, VENDOR_READ_LENGTH,
- ATEN_WDR_TIMEOUT);
- dbg("%s: offset is %x, return val %x", __func__, reg, *val);
- *val = (*val) & 0x00ff;
- return ret;
-}
-
-static int set_uart_reg(struct usb_serial_port *port, __u16 reg, __u16 val)
-{
- struct usb_device *dev = port->serial->dev;
- struct ATENINTL_serial *a_serial;
- __u16 minor;
-
- a_serial = usb_get_serial_data(port->serial);
- minor = port->serial->minor;
- if (minor == SERIAL_TTY_NO_MINOR)
- minor = 0;
- val = val & 0x00ff;
-
- /*
- * For the UART control registers,
- * the application number need to be Or'ed
- */
- if (a_serial->ATEN2011_spectrum_2or4ports == 4)
- val |= (((__u16)port->number - minor) + 1) << 8;
- else {
- if (((__u16) port->number - minor) == 0)
- val |= (((__u16)port->number - minor) + 1) << 8;
- else
- val |= (((__u16)port->number - minor) + 2) << 8;
- }
- dbg("%s: application number is %x", __func__, val);
-
- return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), ATEN_WRREQ,
- ATEN_WR_RTYPE, val, reg, NULL, 0,
- ATEN_WDR_TIMEOUT);
-}
-
-static int get_uart_reg(struct usb_serial_port *port, __u16 reg, __u16 *val)
-{
- struct usb_device *dev = port->serial->dev;
- int ret = 0;
- __u16 wval;
- struct ATENINTL_serial *a_serial;
- __u16 minor = port->serial->minor;
-
- a_serial = usb_get_serial_data(port->serial);
- if (minor == SERIAL_TTY_NO_MINOR)
- minor = 0;
-
- /* wval is same as application number */
- if (a_serial->ATEN2011_spectrum_2or4ports == 4)
- wval = (((__u16)port->number - minor) + 1) << 8;
- else {
- if (((__u16) port->number - minor) == 0)
- wval = (((__u16) port->number - minor) + 1) << 8;
- else
- wval = (((__u16) port->number - minor) + 2) << 8;
- }
- dbg("%s: application number is %x", __func__, wval);
- ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), ATEN_RDREQ,
- ATEN_RD_RTYPE, wval, reg, val, VENDOR_READ_LENGTH,
- ATEN_WDR_TIMEOUT);
- *val = (*val) & 0x00ff;
- return ret;
-}
-
-static int handle_newMsr(struct ATENINTL_port *port, __u8 newMsr)
-{
- struct ATENINTL_port *ATEN2011_port;
- struct async_icount *icount;
- ATEN2011_port = port;
- icount = &ATEN2011_port->icount;
- if (newMsr &
- (ATEN_MSR_DELTA_CTS | ATEN_MSR_DELTA_DSR | ATEN_MSR_DELTA_RI |
- ATEN_MSR_DELTA_CD)) {
- icount = &ATEN2011_port->icount;
-
- /* update input line counters */
- if (newMsr & ATEN_MSR_DELTA_CTS)
- icount->cts++;
- if (newMsr & ATEN_MSR_DELTA_DSR)
- icount->dsr++;
- if (newMsr & ATEN_MSR_DELTA_CD)
- icount->dcd++;
- if (newMsr & ATEN_MSR_DELTA_RI)
- icount->rng++;
- }
-
- return 0;
-}
-
-static int handle_newLsr(struct ATENINTL_port *port, __u8 newLsr)
-{
- struct async_icount *icount;
-
- dbg("%s - %02x", __func__, newLsr);
-
- if (newLsr & SERIAL_LSR_BI) {
- /*
- * Parity and Framing errors only count if they occur exclusive
- * of a break being received.
- */
- newLsr &= (__u8) (SERIAL_LSR_OE | SERIAL_LSR_BI);
- }
-
- /* update input line counters */
- icount = &port->icount;
- if (newLsr & SERIAL_LSR_BI)
- icount->brk++;
- if (newLsr & SERIAL_LSR_OE)
- icount->overrun++;
- if (newLsr & SERIAL_LSR_PE)
- icount->parity++;
- if (newLsr & SERIAL_LSR_FE)
- icount->frame++;
-
- return 0;
-}
-
-static void ATEN2011_control_callback(struct urb *urb)
-{
- unsigned char *data;
- struct ATENINTL_port *ATEN2011_port;
- __u8 regval = 0x0;
-
- switch (urb->status) {
- case 0:
- /* success */
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d", __func__,
- urb->status);
- return;
- default:
- dbg("%s - nonzero urb status received: %d", __func__,
- urb->status);
- goto exit;
- }
-
- ATEN2011_port = (struct ATENINTL_port *)urb->context;
-
- dbg("%s urb buffer size is %d", __func__, urb->actual_length);
- dbg("%s ATEN2011_port->MsrLsr is %d port %d", __func__,
- ATEN2011_port->MsrLsr, ATEN2011_port->port_num);
- data = urb->transfer_buffer;
- regval = (__u8) data[0];
- dbg("%s data is %x", __func__, regval);
- if (ATEN2011_port->MsrLsr == 0)
- handle_newMsr(ATEN2011_port, regval);
- else if (ATEN2011_port->MsrLsr == 1)
- handle_newLsr(ATEN2011_port, regval);
-
-exit:
- return;
-}
-
-static int ATEN2011_get_reg(struct ATENINTL_port *ATEN, __u16 Wval, __u16 reg,
- __u16 *val)
-{
- struct usb_device *dev = ATEN->port->serial->dev;
- struct usb_ctrlrequest *dr = NULL;
- unsigned char *buffer = NULL;
- int ret = 0;
- buffer = (__u8 *) ATEN->ctrl_buf;
-
- dr = (void *)(buffer + 2);
- dr->bRequestType = ATEN_RD_RTYPE;
- dr->bRequest = ATEN_RDREQ;
- dr->wValue = cpu_to_le16(Wval);
- dr->wIndex = cpu_to_le16(reg);
- dr->wLength = cpu_to_le16(2);
-
- usb_fill_control_urb(ATEN->control_urb, dev, usb_rcvctrlpipe(dev, 0),
- (unsigned char *)dr, buffer, 2,
- ATEN2011_control_callback, ATEN);
- ATEN->control_urb->transfer_buffer_length = 2;
- ret = usb_submit_urb(ATEN->control_urb, GFP_ATOMIC);
- return ret;
-}
-
-static void ATEN2011_interrupt_callback(struct urb *urb)
-{
- int result;
- int length;
- struct ATENINTL_port *ATEN2011_port;
- struct ATENINTL_serial *ATEN2011_serial;
- struct usb_serial *serial;
- __u16 Data;
- unsigned char *data;
- __u8 sp[5], st;
- int i;
- __u16 wval;
- int minor;
-
- dbg("%s", " : Entering");
-
- ATEN2011_serial = (struct ATENINTL_serial *)urb->context;
-
- switch (urb->status) {
- case 0:
- /* success */
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d", __func__,
- urb->status);
- return;
- default:
- dbg("%s - nonzero urb status received: %d", __func__,
- urb->status);
- goto exit;
- }
- length = urb->actual_length;
- data = urb->transfer_buffer;
-
- serial = ATEN2011_serial->serial;
-
- /* ATENINTL get 5 bytes
- * Byte 1 IIR Port 1 (port.number is 0)
- * Byte 2 IIR Port 2 (port.number is 1)
- * Byte 3 IIR Port 3 (port.number is 2)
- * Byte 4 IIR Port 4 (port.number is 3)
- * Byte 5 FIFO status for both */
-
- if (length && length > 5) {
- dbg("%s", "Wrong data !!!");
- return;
- }
-
- /* MATRIX */
- if (ATEN2011_serial->ATEN2011_spectrum_2or4ports == 4) {
- sp[0] = (__u8) data[0];
- sp[1] = (__u8) data[1];
- sp[2] = (__u8) data[2];
- sp[3] = (__u8) data[3];
- st = (__u8) data[4];
- } else {
- sp[0] = (__u8) data[0];
- sp[1] = (__u8) data[2];
- /* sp[2]=(__u8)data[2]; */
- /* sp[3]=(__u8)data[3]; */
- st = (__u8) data[4];
-
- }
- for (i = 0; i < serial->num_ports; i++) {
- ATEN2011_port = usb_get_serial_port_data(serial->port[i]);
- minor = serial->minor;
- if (minor == SERIAL_TTY_NO_MINOR)
- minor = 0;
- if ((ATEN2011_serial->ATEN2011_spectrum_2or4ports == 2)
- && (i != 0))
- wval =
- (((__u16) serial->port[i]->number -
- (__u16) (minor)) + 2) << 8;
- else
- wval =
- (((__u16) serial->port[i]->number -
- (__u16) (minor)) + 1) << 8;
- if (ATEN2011_port->open != 0) {
- if (sp[i] & 0x01) {
- dbg("SP%d No Interrupt !!!", i);
- } else {
- switch (sp[i] & 0x0f) {
- case SERIAL_IIR_RLS:
- dbg("Serial Port %d: Receiver status error or address bit detected in 9-bit mode", i);
- ATEN2011_port->MsrLsr = 1;
- ATEN2011_get_reg(ATEN2011_port, wval,
- LINE_STATUS_REGISTER,
- &Data);
- break;
- case SERIAL_IIR_MS:
- dbg("Serial Port %d: Modem status change", i);
- ATEN2011_port->MsrLsr = 0;
- ATEN2011_get_reg(ATEN2011_port, wval,
- MODEM_STATUS_REGISTER,
- &Data);
- break;
- }
- }
- }
-
- }
-exit:
- if (ATEN2011_serial->status_polling_started == 0)
- return;
-
- result = usb_submit_urb(urb, GFP_ATOMIC);
- if (result) {
- dev_err(&urb->dev->dev,
- "%s - Error %d submitting interrupt urb\n",
- __func__, result);
- }
-
- return;
-}
-
-static void ATEN2011_bulk_in_callback(struct urb *urb)
-{
- int status;
- unsigned char *data;
- struct usb_serial *serial;
- struct usb_serial_port *port;
- struct ATENINTL_serial *ATEN2011_serial;
- struct ATENINTL_port *ATEN2011_port;
- struct tty_struct *tty;
-
- if (urb->status) {
- dbg("nonzero read bulk status received: %d", urb->status);
- return;
- }
-
- ATEN2011_port = (struct ATENINTL_port *)urb->context;
-
- port = (struct usb_serial_port *)ATEN2011_port->port;
- serial = port->serial;
-
- dbg("%s", "Entering...");
-
- data = urb->transfer_buffer;
- ATEN2011_serial = usb_get_serial_data(serial);
-
- if (urb->actual_length) {
- tty = tty_port_tty_get(&ATEN2011_port->port->port);
- if (tty) {
- tty_buffer_request_room(tty, urb->actual_length);
- tty_insert_flip_string(tty, data, urb->actual_length);
- tty_flip_buffer_push(tty);
- tty_kref_put(tty);
- }
-
- ATEN2011_port->icount.rx += urb->actual_length;
- dbg("ATEN2011_port->icount.rx is %d:",
- ATEN2011_port->icount.rx);
- }
-
- if (!ATEN2011_port->read_urb) {
- dbg("%s", "URB KILLED !!!");
- return;
- }
-
- if (ATEN2011_port->read_urb->status != -EINPROGRESS) {
- ATEN2011_port->read_urb->dev = serial->dev;
-
- status = usb_submit_urb(ATEN2011_port->read_urb, GFP_ATOMIC);
- if (status)
- dbg("usb_submit_urb(read bulk) failed, status = %d", status);
- }
-}
-
-static void ATEN2011_bulk_out_data_callback(struct urb *urb)
-{
- struct ATENINTL_port *ATEN2011_port;
- struct tty_struct *tty;
-
- if (urb->status) {
- dbg("nonzero write bulk status received:%d", urb->status);
- return;
- }
-
- ATEN2011_port = (struct ATENINTL_port *)urb->context;
-
- dbg("%s", "Entering .........");
-
- tty = tty_port_tty_get(&ATEN2011_port->port->port);
-
- if (tty && ATEN2011_port->open)
- /* tell the tty driver that something has changed */
- tty_wakeup(tty);
-
- /* schedule_work(&ATEN2011_port->port->work); */
- tty_kref_put(tty);
-
-}
-
-#ifdef ATENSerialProbe
-static int ATEN2011_serial_probe(struct usb_serial *serial,
- const struct usb_device_id *id)
-{
-
- /*need to implement the mode_reg reading and updating\
- structures usb_serial_ device_type\
- (i.e num_ports, num_bulkin,bulkout etc) */
- /* Also we can update the changes attach */
- return 1;
-}
-#endif
-
-static int ATEN2011_open(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp)
-{
- int response;
- int j;
- struct usb_serial *serial;
- struct urb *urb;
- __u16 Data;
- int status;
- struct ATENINTL_serial *ATEN2011_serial;
- struct ATENINTL_port *ATEN2011_port;
- struct ktermios tmp_termios;
- int minor;
-
- serial = port->serial;
-
- ATEN2011_port = usb_get_serial_port_data(port);
-
- if (ATEN2011_port == NULL)
- return -ENODEV;
-
- ATEN2011_serial = usb_get_serial_data(serial);
- if (ATEN2011_serial == NULL)
- return -ENODEV;
-
- /* increment the number of opened ports counter here */
- ATEN2011_serial->NoOfOpenPorts++;
-
- usb_clear_halt(serial->dev, port->write_urb->pipe);
- usb_clear_halt(serial->dev, port->read_urb->pipe);
-
- /* Initialising the write urb pool */
- for (j = 0; j < NUM_URBS; ++j) {
- urb = usb_alloc_urb(0, GFP_ATOMIC);
- ATEN2011_port->write_urb_pool[j] = urb;
-
- if (urb == NULL) {
- err("No more urbs???");
- continue;
- }
-
- urb->transfer_buffer = NULL;
- urb->transfer_buffer =
- kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
- if (!urb->transfer_buffer) {
- err("%s-out of memory for urb buffers.", __func__);
- continue;
- }
- }
-
-/*****************************************************************************
- * Initialize ATEN2011 -- Write Init values to corresponding Registers
- *
- * Register Index
- * 1 : IER
- * 2 : FCR
- * 3 : LCR
- * 4 : MCR
- *
- * 0x08 : SP1/2 Control Reg
- *****************************************************************************/
-
-/* NEED to check the fallowing Block */
-
- Data = 0x0;
- status = get_reg_sync(port, ATEN2011_port->SpRegOffset, &Data);
- if (status < 0) {
- dbg("Reading Spreg failed");
- return -1;
- }
- Data |= 0x80;
- status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data);
- if (status < 0) {
- dbg("writing Spreg failed");
- return -1;
- }
-
- Data &= ~0x80;
- status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data);
- if (status < 0) {
- dbg("writing Spreg failed");
- return -1;
- }
-
-/* End of block to be checked */
-/**************************CHECK***************************/
-
- if (RS485mode == 0)
- Data = 0xC0;
- else
- Data = 0x00;
- status = set_uart_reg(port, SCRATCH_PAD_REGISTER, Data);
- if (status < 0) {
- dbg("Writing SCRATCH_PAD_REGISTER failed status-0x%x", status);
- return -1;
- } else
- dbg("SCRATCH_PAD_REGISTER Writing success status%d", status);
-
-/**************************CHECK***************************/
-
- Data = 0x0;
- status = get_reg_sync(port, ATEN2011_port->ControlRegOffset, &Data);
- if (status < 0) {
- dbg("Reading Controlreg failed");
- return -1;
- }
- Data |= 0x08; /* Driver done bit */
- Data |= 0x20; /* rx_disable */
- status = 0;
- status =
- set_reg_sync(port, ATEN2011_port->ControlRegOffset, Data);
- if (status < 0) {
- dbg("writing Controlreg failed");
- return -1;
- }
- /*
- * do register settings here
- * Set all regs to the device default values.
- * First Disable all interrupts.
- */
-
- Data = 0x00;
- status = set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
- if (status < 0) {
- dbg("disableing interrupts failed");
- return -1;
- }
- /* Set FIFO_CONTROL_REGISTER to the default value */
- Data = 0x00;
- status = set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
- if (status < 0) {
- dbg("Writing FIFO_CONTROL_REGISTER failed");
- return -1;
- }
-
- Data = 0xcf; /* chk */
- status = set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
- if (status < 0) {
- dbg("Writing FIFO_CONTROL_REGISTER failed");
- return -1;
- }
-
- Data = 0x03; /* LCR_BITS_8 */
- status = set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
- ATEN2011_port->shadowLCR = Data;
-
- Data = 0x0b; /* MCR_DTR|MCR_RTS|MCR_MASTER_IE */
- status = set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
- ATEN2011_port->shadowMCR = Data;
-
-#ifdef Check
- Data = 0x00;
- status = get_uart_reg(port, LINE_CONTROL_REGISTER, &Data);
- ATEN2011_port->shadowLCR = Data;
-
- Data |= SERIAL_LCR_DLAB; /* data latch enable in LCR 0x80 */
- status = set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
-
- Data = 0x0c;
- status = set_uart_reg(port, DIVISOR_LATCH_LSB, Data);
-
- Data = 0x0;
- status = set_uart_reg(port, DIVISOR_LATCH_MSB, Data);
-
- Data = 0x00;
- status = get_uart_reg(port, LINE_CONTROL_REGISTER, &Data);
-
-/* Data = ATEN2011_port->shadowLCR; */ /* data latch disable */
- Data = Data & ~SERIAL_LCR_DLAB;
- status = set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
- ATEN2011_port->shadowLCR = Data;
-#endif
- /* clearing Bulkin and Bulkout Fifo */
- Data = 0x0;
- status = get_reg_sync(port, ATEN2011_port->SpRegOffset, &Data);
-
- Data = Data | 0x0c;
- status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data);
-
- Data = Data & ~0x0c;
- status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data);
- /* Finally enable all interrupts */
- Data = 0x0;
- Data = 0x0c;
- status = set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
-
- /* clearing rx_disable */
- Data = 0x0;
- status = get_reg_sync(port, ATEN2011_port->ControlRegOffset, &Data);
- Data = Data & ~0x20;
- status = set_reg_sync(port, ATEN2011_port->ControlRegOffset, Data);
-
- /* rx_negate */
- Data = 0x0;
- status = get_reg_sync(port, ATEN2011_port->ControlRegOffset, &Data);
- Data = Data | 0x10;
- status = 0;
- status = set_reg_sync(port, ATEN2011_port->ControlRegOffset, Data);
-
- /*
- * Check to see if we've set up our endpoint info yet
- * (can't set it up in ATEN2011_startup as the structures
- * were not set up at that time.)
- */
- if (ATEN2011_serial->NoOfOpenPorts == 1) {
- /* start the status polling here */
- ATEN2011_serial->status_polling_started = 1;
- /* If not yet set, Set here */
- ATEN2011_serial->interrupt_in_buffer =
- serial->port[0]->interrupt_in_buffer;
- ATEN2011_serial->interrupt_in_endpoint =
- serial->port[0]->interrupt_in_endpointAddress;
- ATEN2011_serial->interrupt_read_urb =
- serial->port[0]->interrupt_in_urb;
-
- /* set up interrupt urb */
- usb_fill_int_urb(ATEN2011_serial->interrupt_read_urb,
- serial->dev,
- usb_rcvintpipe(serial->dev,
- ATEN2011_serial->
- interrupt_in_endpoint),
- ATEN2011_serial->interrupt_in_buffer,
- ATEN2011_serial->interrupt_read_urb->
- transfer_buffer_length,
- ATEN2011_interrupt_callback, ATEN2011_serial,
- ATEN2011_serial->interrupt_read_urb->interval);
-
- /* start interrupt read for ATEN2011 *
- * will continue as long as ATEN2011 is connected */
-
- response =
- usb_submit_urb(ATEN2011_serial->interrupt_read_urb,
- GFP_KERNEL);
- if (response) {
- dbg("%s - Error %d submitting interrupt urb",
- __func__, response);
- }
-
- }
-
- /*
- * See if we've set up our endpoint info yet
- * (can't set it up in ATEN2011_startup as the
- * structures were not set up at that time.)
- */
-
- dbg("port number is %d", port->number);
- dbg("serial number is %d", port->serial->minor);
- dbg("Bulkin endpoint is %d", port->bulk_in_endpointAddress);
- dbg("BulkOut endpoint is %d", port->bulk_out_endpointAddress);
- dbg("Interrupt endpoint is %d",
- port->interrupt_in_endpointAddress);
- dbg("port's number in the device is %d", ATEN2011_port->port_num);
- ATEN2011_port->bulk_in_buffer = port->bulk_in_buffer;
- ATEN2011_port->bulk_in_endpoint = port->bulk_in_endpointAddress;
- ATEN2011_port->read_urb = port->read_urb;
- ATEN2011_port->bulk_out_endpoint = port->bulk_out_endpointAddress;
-
- minor = port->serial->minor;
- if (minor == SERIAL_TTY_NO_MINOR)
- minor = 0;
-
- /* set up our bulk in urb */
- if ((ATEN2011_serial->ATEN2011_spectrum_2or4ports == 2)
- && (((__u16) port->number - (__u16) (minor)) != 0)) {
- usb_fill_bulk_urb(ATEN2011_port->read_urb, serial->dev,
- usb_rcvbulkpipe(serial->dev,
- (port->
- bulk_in_endpointAddress +
- 2)), port->bulk_in_buffer,
- ATEN2011_port->read_urb->
- transfer_buffer_length,
- ATEN2011_bulk_in_callback, ATEN2011_port);
- } else
- usb_fill_bulk_urb(ATEN2011_port->read_urb,
- serial->dev,
- usb_rcvbulkpipe(serial->dev,
- port->
- bulk_in_endpointAddress),
- port->bulk_in_buffer,
- ATEN2011_port->read_urb->
- transfer_buffer_length,
- ATEN2011_bulk_in_callback, ATEN2011_port);
-
- dbg("ATEN2011_open: bulkin endpoint is %d",
- port->bulk_in_endpointAddress);
- response = usb_submit_urb(ATEN2011_port->read_urb, GFP_KERNEL);
- if (response) {
- err("%s - Error %d submitting control urb", __func__,
- response);
- }
-
- /* initialize our wait queues */
- init_waitqueue_head(&ATEN2011_port->wait_chase);
- init_waitqueue_head(&ATEN2011_port->wait_command);
-
- /* initialize our icount structure */
- memset(&(ATEN2011_port->icount), 0x00, sizeof(ATEN2011_port->icount));
-
- /* initialize our port settings */
- ATEN2011_port->shadowMCR = MCR_MASTER_IE; /* Must set to enable ints! */
- ATEN2011_port->chaseResponsePending = 0;
- /* send a open port command */
- ATEN2011_port->open = 1;
- /* ATEN2011_change_port_settings(ATEN2011_port,old_termios); */
- /* Setup termios */
- ATEN2011_set_termios(tty, port, &tmp_termios);
- ATEN2011_port->icount.tx = 0;
- ATEN2011_port->icount.rx = 0;
-
- dbg("usb_serial serial:%x ATEN2011_port:%x\nATEN2011_serial:%x usb_serial_port port:%x",
- (unsigned int)serial, (unsigned int)ATEN2011_port,
- (unsigned int)ATEN2011_serial, (unsigned int)port);
-
- return 0;
-
-}
-
-static int ATEN2011_chars_in_buffer(struct tty_struct *tty)
-{
- struct usb_serial_port *port = tty->driver_data;
- int i;
- int chars = 0;
- struct ATENINTL_port *ATEN2011_port;
-
- /* dbg("%s"," ATEN2011_chars_in_buffer:entering ..........."); */
-
- ATEN2011_port = usb_get_serial_port_data(port);
- if (ATEN2011_port == NULL) {
- dbg("%s", "ATEN2011_break:leaving ...........");
- return -1;
- }
-
- for (i = 0; i < NUM_URBS; ++i)
- if (ATEN2011_port->write_urb_pool[i]->status == -EINPROGRESS)
- chars += URB_TRANSFER_BUFFER_SIZE;
-
- dbg("%s - returns %d", __func__, chars);
- return chars;
-
-}
-
-static void ATEN2011_block_until_tx_empty(struct tty_struct *tty,
- struct ATENINTL_port *ATEN2011_port)
-{
- int timeout = HZ / 10;
- int wait = 30;
- int count;
-
- while (1) {
- count = ATEN2011_chars_in_buffer(tty);
-
- /* Check for Buffer status */
- if (count <= 0)
- return;
-
- /* Block the thread for a while */
- interruptible_sleep_on_timeout(&ATEN2011_port->wait_chase,
- timeout);
-
- /* No activity.. count down section */
- wait--;
- if (wait == 0) {
- dbg("%s - TIMEOUT", __func__);
- return;
- } else {
- /* Reset timout value back to seconds */
- wait = 30;
- }
- }
-}
-
-static void ATEN2011_close(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp)
-{
- struct usb_serial *serial;
- struct ATENINTL_serial *ATEN2011_serial;
- struct ATENINTL_port *ATEN2011_port;
- int no_urbs;
- __u16 Data;
-
- dbg("%s", "ATEN2011_close:entering...");
- serial = port->serial;
-
- /* take the Adpater and port's private data */
- ATEN2011_serial = usb_get_serial_data(serial);
- ATEN2011_port = usb_get_serial_port_data(port);
- if ((ATEN2011_serial == NULL) || (ATEN2011_port == NULL))
- return;
-
- if (serial->dev) {
- /* flush and block(wait) until tx is empty */
- ATEN2011_block_until_tx_empty(tty, ATEN2011_port);
- }
- /* kill the ports URB's */
- for (no_urbs = 0; no_urbs < NUM_URBS; no_urbs++)
- usb_kill_urb(ATEN2011_port->write_urb_pool[no_urbs]);
- /* Freeing Write URBs */
- for (no_urbs = 0; no_urbs < NUM_URBS; ++no_urbs) {
- kfree(ATEN2011_port->write_urb_pool[no_urbs]->transfer_buffer);
- usb_free_urb(ATEN2011_port->write_urb_pool[no_urbs]);
- }
- /* While closing port, shutdown all bulk read, write *
- * and interrupt read if they exists */
- if (serial->dev) {
- if (ATEN2011_port->write_urb) {
- dbg("%s", "Shutdown bulk write");
- usb_kill_urb(ATEN2011_port->write_urb);
- }
- if (ATEN2011_port->read_urb) {
- dbg("%s", "Shutdown bulk read");
- usb_kill_urb(ATEN2011_port->read_urb);
- }
- if ((&ATEN2011_port->control_urb)) {
- dbg("%s", "Shutdown control read");
- /* usb_kill_urb (ATEN2011_port->control_urb); */
-
- }
- }
- /* if(ATEN2011_port->ctrl_buf != NULL) */
- /* kfree(ATEN2011_port->ctrl_buf); */
- /* decrement the no.of open ports counter of an individual USB-serial adapter. */
- ATEN2011_serial->NoOfOpenPorts--;
- dbg("NoOfOpenPorts in close%d:in port%d",
- ATEN2011_serial->NoOfOpenPorts, port->number);
- if (ATEN2011_serial->NoOfOpenPorts == 0) {
- /* stop the stus polling here */
- ATEN2011_serial->status_polling_started = 0;
- if (ATEN2011_serial->interrupt_read_urb) {
- dbg("%s", "Shutdown interrupt_read_urb");
- /* ATEN2011_serial->interrupt_in_buffer=NULL; */
- /* usb_kill_urb (ATEN2011_serial->interrupt_read_urb); */
- }
- }
- if (ATEN2011_port->write_urb) {
- /* if this urb had a transfer buffer already (old tx) free it */
- kfree(ATEN2011_port->write_urb->transfer_buffer);
- usb_free_urb(ATEN2011_port->write_urb);
- }
-
- /* clear the MCR & IER */
- Data = 0x00;
- set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
- Data = 0x00;
- set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
-
- ATEN2011_port->open = 0;
- dbg("%s", "Leaving ............");
-
-}
-
-static void ATEN2011_block_until_chase_response(struct tty_struct *tty,
- struct ATENINTL_port
- *ATEN2011_port)
-{
- int timeout = 1 * HZ;
- int wait = 10;
- int count;
-
- while (1) {
- count = ATEN2011_chars_in_buffer(tty);
-
- /* Check for Buffer status */
- if (count <= 0) {
- ATEN2011_port->chaseResponsePending = 0;
- return;
- }
-
- /* Block the thread for a while */
- interruptible_sleep_on_timeout(&ATEN2011_port->wait_chase,
- timeout);
- /* No activity.. count down section */
- wait--;
- if (wait == 0) {
- dbg("%s - TIMEOUT", __func__);
- return;
- } else {
- /* Reset timout value back to seconds */
- wait = 10;
- }
- }
-
-}
-
-static void ATEN2011_break(struct tty_struct *tty, int break_state)
-{
- struct usb_serial_port *port = tty->driver_data;
- unsigned char data;
- struct usb_serial *serial;
- struct ATENINTL_serial *ATEN2011_serial;
- struct ATENINTL_port *ATEN2011_port;
-
- dbg("%s", "Entering ...........");
- dbg("ATEN2011_break: Start");
-
- serial = port->serial;
-
- ATEN2011_serial = usb_get_serial_data(serial);
- ATEN2011_port = usb_get_serial_port_data(port);
-
- if ((ATEN2011_serial == NULL) || (ATEN2011_port == NULL))
- return;
-
- /* flush and chase */
- ATEN2011_port->chaseResponsePending = 1;
-
- if (serial->dev) {
- /* flush and block until tx is empty */
- ATEN2011_block_until_chase_response(tty, ATEN2011_port);
- }
-
- if (break_state == -1)
- data = ATEN2011_port->shadowLCR | LCR_SET_BREAK;
- else
- data = ATEN2011_port->shadowLCR & ~LCR_SET_BREAK;
-
- ATEN2011_port->shadowLCR = data;
- dbg("ATEN2011_break ATEN2011_port->shadowLCR is %x",
- ATEN2011_port->shadowLCR);
- set_uart_reg(port, LINE_CONTROL_REGISTER, ATEN2011_port->shadowLCR);
-
- return;
-}
-
-static int ATEN2011_write_room(struct tty_struct *tty)
-{
- struct usb_serial_port *port = tty->driver_data;
- int i;
- int room = 0;
- struct ATENINTL_port *ATEN2011_port;
-
- ATEN2011_port = usb_get_serial_port_data(port);
- if (ATEN2011_port == NULL) {
- dbg("%s", "ATEN2011_break:leaving ...........");
- return -1;
- }
-
- for (i = 0; i < NUM_URBS; ++i)
- if (ATEN2011_port->write_urb_pool[i]->status != -EINPROGRESS)
- room += URB_TRANSFER_BUFFER_SIZE;
-
- dbg("%s - returns %d", __func__, room);
- return room;
-
-}
-
-static int ATEN2011_write(struct tty_struct *tty, struct usb_serial_port *port,
- const unsigned char *data, int count)
-{
- int status;
- int i;
- int bytes_sent = 0;
- int transfer_size;
- int minor;
-
- struct ATENINTL_port *ATEN2011_port;
- struct usb_serial *serial;
- struct ATENINTL_serial *ATEN2011_serial;
- struct urb *urb;
- const unsigned char *current_position = data;
- unsigned char *data1;
- dbg("%s", "entering ...........");
-
- serial = port->serial;
-
- ATEN2011_port = usb_get_serial_port_data(port);
- if (ATEN2011_port == NULL) {
- dbg("%s", "ATEN2011_port is NULL");
- return -1;
- }
-
- ATEN2011_serial = usb_get_serial_data(serial);
- if (ATEN2011_serial == NULL) {
- dbg("%s", "ATEN2011_serial is NULL");
- return -1;
- }
-
- /* try to find a free urb in the list */
- urb = NULL;
-
- for (i = 0; i < NUM_URBS; ++i) {
- if (ATEN2011_port->write_urb_pool[i]->status != -EINPROGRESS) {
- urb = ATEN2011_port->write_urb_pool[i];
- dbg("URB:%d", i);
- break;
- }
- }
-
- if (urb == NULL) {
- dbg("%s - no more free urbs", __func__);
- goto exit;
- }
-
- if (urb->transfer_buffer == NULL) {
- urb->transfer_buffer =
- kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
-
- if (urb->transfer_buffer == NULL) {
- err("%s no more kernel memory...", __func__);
- goto exit;
- }
- }
- transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE);
-
- memcpy(urb->transfer_buffer, current_position, transfer_size);
- /* usb_serial_debug_data (__FILE__, __func__, transfer_size, urb->transfer_buffer); */
-
- /* fill urb with data and submit */
- minor = port->serial->minor;
- if (minor == SERIAL_TTY_NO_MINOR)
- minor = 0;
- if ((ATEN2011_serial->ATEN2011_spectrum_2or4ports == 2)
- && (((__u16) port->number - (__u16) (minor)) != 0)) {
- usb_fill_bulk_urb(urb, ATEN2011_serial->serial->dev,
- usb_sndbulkpipe(ATEN2011_serial->serial->dev,
- (port->
- bulk_out_endpointAddress) +
- 2), urb->transfer_buffer,
- transfer_size,
- ATEN2011_bulk_out_data_callback,
- ATEN2011_port);
- } else
-
- usb_fill_bulk_urb(urb,
- ATEN2011_serial->serial->dev,
- usb_sndbulkpipe(ATEN2011_serial->serial->dev,
- port->
- bulk_out_endpointAddress),
- urb->transfer_buffer, transfer_size,
- ATEN2011_bulk_out_data_callback,
- ATEN2011_port);
-
- data1 = urb->transfer_buffer;
- dbg("bulkout endpoint is %d", port->bulk_out_endpointAddress);
- /* for(i=0;i < urb->actual_length;i++) */
- /* dbg("Data is %c ",data1[i]); */
-
- /* send it down the pipe */
- status = usb_submit_urb(urb, GFP_ATOMIC);
-
- if (status) {
- err("%s - usb_submit_urb(write bulk) failed with status = %d",
- __func__, status);
- bytes_sent = status;
- goto exit;
- }
- bytes_sent = transfer_size;
- ATEN2011_port->icount.tx += transfer_size;
- dbg("ATEN2011_port->icount.tx is %d:", ATEN2011_port->icount.tx);
-
-exit:
- return bytes_sent;
-}
-
-static void ATEN2011_throttle(struct tty_struct *tty)
-{
- struct usb_serial_port *port = tty->driver_data;
- struct ATENINTL_port *ATEN2011_port;
- int status;
-
- dbg("- port %d", port->number);
-
- ATEN2011_port = usb_get_serial_port_data(port);
-
- if (ATEN2011_port == NULL)
- return;
-
- if (!ATEN2011_port->open) {
- dbg("%s", "port not opened");
- return;
- }
-
- dbg("%s", "Entering .......... ");
-
- if (!tty) {
- dbg("%s - no tty available", __func__);
- return;
- }
-
- /* if we are implementing XON/XOFF, send the stop character */
- if (I_IXOFF(tty)) {
- unsigned char stop_char = STOP_CHAR(tty);
- status = ATEN2011_write(tty, port, &stop_char, 1);
- if (status <= 0)
- return;
- }
-
- /* if we are implementing RTS/CTS, toggle that line */
- if (tty->termios->c_cflag & CRTSCTS) {
- ATEN2011_port->shadowMCR &= ~MCR_RTS;
- status = set_uart_reg(port, MODEM_CONTROL_REGISTER,
- ATEN2011_port->shadowMCR);
- if (status < 0)
- return;
- }
-
- return;
-}
-
-static void ATEN2011_unthrottle(struct tty_struct *tty)
-{
- struct usb_serial_port *port = tty->driver_data;
- int status;
- struct ATENINTL_port *ATEN2011_port = usb_get_serial_port_data(port);
-
- if (ATEN2011_port == NULL)
- return;
-
- if (!ATEN2011_port->open) {
- dbg("%s - port not opened", __func__);
- return;
- }
-
- dbg("%s", "Entering .......... ");
-
- if (!tty) {
- dbg("%s - no tty available", __func__);
- return;
- }
-
- /* if we are implementing XON/XOFF, send the start character */
- if (I_IXOFF(tty)) {
- unsigned char start_char = START_CHAR(tty);
- status = ATEN2011_write(tty, port, &start_char, 1);
- if (status <= 0)
- return;
- }
-
- /* if we are implementing RTS/CTS, toggle that line */
- if (tty->termios->c_cflag & CRTSCTS) {
- ATEN2011_port->shadowMCR |= MCR_RTS;
- status = set_uart_reg(port, MODEM_CONTROL_REGISTER,
- ATEN2011_port->shadowMCR);
- if (status < 0)
- return;
- }
-
- return;
-}
-
-static int ATEN2011_tiocmget(struct tty_struct *tty, struct file *file)
-{
- struct usb_serial_port *port = tty->driver_data;
- struct ATENINTL_port *ATEN2011_port;
- unsigned int result;
- __u16 msr;
- __u16 mcr;
- /* unsigned int mcr; */
- int status = 0;
- ATEN2011_port = usb_get_serial_port_data(port);
-
- dbg("%s - port %d", __func__, port->number);
-
- if (ATEN2011_port == NULL)
- return -ENODEV;
-
- status = get_uart_reg(port, MODEM_STATUS_REGISTER, &msr);
- status = get_uart_reg(port, MODEM_CONTROL_REGISTER, &mcr);
- /* mcr = ATEN2011_port->shadowMCR; */
- /* COMMENT2: the Fallowing three line are commented for updating only MSR values */
- result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0)
- | ((mcr & MCR_RTS) ? TIOCM_RTS : 0)
- | ((mcr & MCR_LOOPBACK) ? TIOCM_LOOP : 0)
- | ((msr & ATEN2011_MSR_CTS) ? TIOCM_CTS : 0)
- | ((msr & ATEN2011_MSR_CD) ? TIOCM_CAR : 0)
- | ((msr & ATEN2011_MSR_RI) ? TIOCM_RI : 0)
- | ((msr & ATEN2011_MSR_DSR) ? TIOCM_DSR : 0);
-
- dbg("%s - 0x%04X", __func__, result);
-
- return result;
-}
-
-static int ATEN2011_tiocmset(struct tty_struct *tty, struct file *file,
- unsigned int set, unsigned int clear)
-{
- struct usb_serial_port *port = tty->driver_data;
- struct ATENINTL_port *ATEN2011_port;
- unsigned int mcr;
- unsigned int status;
-
- dbg("%s - port %d", __func__, port->number);
-
- ATEN2011_port = usb_get_serial_port_data(port);
-
- if (ATEN2011_port == NULL)
- return -ENODEV;
-
- mcr = ATEN2011_port->shadowMCR;
- if (clear & TIOCM_RTS)
- mcr &= ~MCR_RTS;
- if (clear & TIOCM_DTR)
- mcr &= ~MCR_DTR;
- if (clear & TIOCM_LOOP)
- mcr &= ~MCR_LOOPBACK;
-
- if (set & TIOCM_RTS)
- mcr |= MCR_RTS;
- if (set & TIOCM_DTR)
- mcr |= MCR_DTR;
- if (set & TIOCM_LOOP)
- mcr |= MCR_LOOPBACK;
-
- ATEN2011_port->shadowMCR = mcr;
-
- status = set_uart_reg(port, MODEM_CONTROL_REGISTER, mcr);
- if (status < 0) {
- dbg("setting MODEM_CONTROL_REGISTER Failed");
- return -1;
- }
-
- return 0;
-}
-
-static void ATEN2011_set_termios(struct tty_struct *tty,
- struct usb_serial_port *port,
- struct ktermios *old_termios)
-{
- int status;
- unsigned int cflag;
- struct usb_serial *serial;
- struct ATENINTL_port *ATEN2011_port;
-
- dbg("ATEN2011_set_termios: START");
-
- serial = port->serial;
-
- ATEN2011_port = usb_get_serial_port_data(port);
-
- if (ATEN2011_port == NULL)
- return;
-
- if (!ATEN2011_port->open) {
- dbg("%s - port not opened", __func__);
- return;
- }
-
- dbg("%s", "setting termios - ");
-
- cflag = tty->termios->c_cflag;
-
- dbg("%s - cflag %08x iflag %08x", __func__,
- tty->termios->c_cflag, RELEVANT_IFLAG(tty->termios->c_iflag));
-
- if (old_termios) {
- dbg("%s - old clfag %08x old iflag %08x", __func__,
- old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag));
- }
-
- dbg("%s - port %d", __func__, port->number);
-
- /* change the port settings to the new ones specified */
-
- ATEN2011_change_port_settings(tty, ATEN2011_port, old_termios);
-
- if (!ATEN2011_port->read_urb) {
- dbg("%s", "URB KILLED !!!!!");
- return;
- }
-
- if (ATEN2011_port->read_urb->status != -EINPROGRESS) {
- ATEN2011_port->read_urb->dev = serial->dev;
- status = usb_submit_urb(ATEN2011_port->read_urb, GFP_ATOMIC);
- if (status) {
- dbg
- (" usb_submit_urb(read bulk) failed, status = %d",
- status);
- }
- }
- return;
-}
-
-static int get_lsr_info(struct tty_struct *tty,
- struct ATENINTL_port *ATEN2011_port,
- unsigned int __user *value)
-{
- int count;
- unsigned int result = 0;
-
- count = ATEN2011_chars_in_buffer(tty);
- if (count == 0) {
- dbg("%s -- Empty", __func__);
- result = TIOCSER_TEMT;
- }
-
- if (copy_to_user(value, &result, sizeof(int)))
- return -EFAULT;
- return 0;
-}
-
-static int get_number_bytes_avail(struct tty_struct *tty,
- struct ATENINTL_port *ATEN2011_port,
- unsigned int __user *value)
-{
- unsigned int result = 0;
-
- if (!tty)
- return -ENOIOCTLCMD;
-
- result = tty->read_cnt;
-
- dbg("%s(%d) = %d", __func__, ATEN2011_port->port->number, result);
- if (copy_to_user(value, &result, sizeof(int)))
- return -EFAULT;
-
- return -ENOIOCTLCMD;
-}
-
-static int set_modem_info(struct ATENINTL_port *ATEN2011_port, unsigned int cmd,
- unsigned int __user *value)
-{
- unsigned int mcr;
- unsigned int arg;
- __u16 Data;
- int status;
- struct usb_serial_port *port;
-
- if (ATEN2011_port == NULL)
- return -1;
-
- port = (struct usb_serial_port *)ATEN2011_port->port;
-
- mcr = ATEN2011_port->shadowMCR;
-
- if (copy_from_user(&arg, value, sizeof(int)))
- return -EFAULT;
-
- switch (cmd) {
- case TIOCMBIS:
- if (arg & TIOCM_RTS)
- mcr |= MCR_RTS;
- if (arg & TIOCM_DTR)
- mcr |= MCR_RTS;
- if (arg & TIOCM_LOOP)
- mcr |= MCR_LOOPBACK;
- break;
-
- case TIOCMBIC:
- if (arg & TIOCM_RTS)
- mcr &= ~MCR_RTS;
- if (arg & TIOCM_DTR)
- mcr &= ~MCR_RTS;
- if (arg & TIOCM_LOOP)
- mcr &= ~MCR_LOOPBACK;
- break;
-
- case TIOCMSET:
- /* turn off the RTS and DTR and LOOPBACK
- * and then only turn on what was asked to */
- mcr &= ~(MCR_RTS | MCR_DTR | MCR_LOOPBACK);
- mcr |= ((arg & TIOCM_RTS) ? MCR_RTS : 0);
- mcr |= ((arg & TIOCM_DTR) ? MCR_DTR : 0);
- mcr |= ((arg & TIOCM_LOOP) ? MCR_LOOPBACK : 0);
- break;
- }
-
- ATEN2011_port->shadowMCR = mcr;
-
- Data = ATEN2011_port->shadowMCR;
- status = set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
- if (status < 0) {
- dbg("setting MODEM_CONTROL_REGISTER Failed");
- return -1;
- }
-
- return 0;
-}
-
-static int get_modem_info(struct ATENINTL_port *ATEN2011_port,
- unsigned int __user *value)
-{
- unsigned int result = 0;
- __u16 msr;
- unsigned int mcr = ATEN2011_port->shadowMCR;
- int status;
-
- status = get_uart_reg(ATEN2011_port->port, MODEM_STATUS_REGISTER, &msr);
- result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0) /* 0x002 */
- |((mcr & MCR_RTS) ? TIOCM_RTS : 0) /* 0x004 */
- |((msr & ATEN2011_MSR_CTS) ? TIOCM_CTS : 0) /* 0x020 */
- |((msr & ATEN2011_MSR_CD) ? TIOCM_CAR : 0) /* 0x040 */
- |((msr & ATEN2011_MSR_RI) ? TIOCM_RI : 0) /* 0x080 */
- |((msr & ATEN2011_MSR_DSR) ? TIOCM_DSR : 0); /* 0x100 */
-
- dbg("%s -- %x", __func__, result);
-
- if (copy_to_user(value, &result, sizeof(int)))
- return -EFAULT;
- return 0;
-}
-
-static int get_serial_info(struct ATENINTL_port *ATEN2011_port,
- struct serial_struct __user *retinfo)
-{
- struct serial_struct tmp;
-
- if (ATEN2011_port == NULL)
- return -1;
-
- if (!retinfo)
- return -EFAULT;
-
- memset(&tmp, 0, sizeof(tmp));
-
- tmp.type = PORT_16550A;
- tmp.line = ATEN2011_port->port->serial->minor;
- if (tmp.line == SERIAL_TTY_NO_MINOR)
- tmp.line = 0;
- tmp.port = ATEN2011_port->port->number;
- tmp.irq = 0;
- tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
- tmp.xmit_fifo_size = NUM_URBS * URB_TRANSFER_BUFFER_SIZE;
- tmp.baud_base = 9600;
- tmp.close_delay = 5 * HZ;
- tmp.closing_wait = 30 * HZ;
-
- if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
- return -EFAULT;
- return 0;
-}
-
-static int ATEN2011_ioctl(struct tty_struct *tty, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- struct usb_serial_port *port = tty->driver_data;
- struct ATENINTL_port *ATEN2011_port;
- struct async_icount cnow;
- struct async_icount cprev;
- struct serial_icounter_struct icount;
- int ATENret = 0;
- unsigned int __user *user_arg = (unsigned int __user *)arg;
-
- ATEN2011_port = usb_get_serial_port_data(port);
-
- if (ATEN2011_port == NULL)
- return -1;
-
- dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
-
- switch (cmd) {
- /* return number of bytes available */
-
- case TIOCINQ:
- dbg("%s (%d) TIOCINQ", __func__, port->number);
- return get_number_bytes_avail(tty, ATEN2011_port, user_arg);
- break;
-
- case TIOCOUTQ:
- dbg("%s (%d) TIOCOUTQ", __func__, port->number);
- return put_user(ATEN2011_chars_in_buffer(tty), user_arg);
- break;
-
- case TIOCSERGETLSR:
- dbg("%s (%d) TIOCSERGETLSR", __func__, port->number);
- return get_lsr_info(tty, ATEN2011_port, user_arg);
- return 0;
-
- case TIOCMBIS:
- case TIOCMBIC:
- case TIOCMSET:
- dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", __func__,
- port->number);
- ATENret = set_modem_info(ATEN2011_port, cmd, user_arg);
- return ATENret;
-
- case TIOCMGET:
- dbg("%s (%d) TIOCMGET", __func__, port->number);
- return get_modem_info(ATEN2011_port, user_arg);
-
- case TIOCGSERIAL:
- dbg("%s (%d) TIOCGSERIAL", __func__, port->number);
- return get_serial_info(ATEN2011_port,
- (struct serial_struct __user *)arg);
-
- case TIOCSSERIAL:
- dbg("%s (%d) TIOCSSERIAL", __func__, port->number);
- break;
-
- case TIOCMIWAIT:
- dbg("%s (%d) TIOCMIWAIT", __func__, port->number);
- cprev = ATEN2011_port->icount;
- while (1) {
- /* see if a signal did it */
- if (signal_pending(current))
- return -ERESTARTSYS;
- cnow = ATEN2011_port->icount;
- if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
- cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
- return -EIO; /* no change => error */
- if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
- ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
- ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
- ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
- return 0;
- }
- cprev = cnow;
- }
- /* NOTREACHED */
- break;
-
- case TIOCGICOUNT:
- cnow = ATEN2011_port->icount;
- icount.cts = cnow.cts;
- icount.dsr = cnow.dsr;
- icount.rng = cnow.rng;
- icount.dcd = cnow.dcd;
- icount.rx = cnow.rx;
- icount.tx = cnow.tx;
- icount.frame = cnow.frame;
- icount.overrun = cnow.overrun;
- icount.parity = cnow.parity;
- icount.brk = cnow.brk;
- icount.buf_overrun = cnow.buf_overrun;
-
- dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__,
- port->number, icount.rx, icount.tx);
- if (copy_to_user((void __user *)arg, &icount, sizeof(icount)))
- return -EFAULT;
- return 0;
-
- default:
- break;
- }
-
- return -ENOIOCTLCMD;
-}
-
-static int ATEN2011_calc_baud_rate_divisor(int baudRate, int *divisor,
- __u16 *clk_sel_val)
-{
- dbg("%s - %d", __func__, baudRate);
-
- if (baudRate <= 115200) {
- *divisor = 115200 / baudRate;
- *clk_sel_val = 0x0;
- }
- if ((baudRate > 115200) && (baudRate <= 230400)) {
- *divisor = 230400 / baudRate;
- *clk_sel_val = 0x10;
- } else if ((baudRate > 230400) && (baudRate <= 403200)) {
- *divisor = 403200 / baudRate;
- *clk_sel_val = 0x20;
- } else if ((baudRate > 403200) && (baudRate <= 460800)) {
- *divisor = 460800 / baudRate;
- *clk_sel_val = 0x30;
- } else if ((baudRate > 460800) && (baudRate <= 806400)) {
- *divisor = 806400 / baudRate;
- *clk_sel_val = 0x40;
- } else if ((baudRate > 806400) && (baudRate <= 921600)) {
- *divisor = 921600 / baudRate;
- *clk_sel_val = 0x50;
- } else if ((baudRate > 921600) && (baudRate <= 1572864)) {
- *divisor = 1572864 / baudRate;
- *clk_sel_val = 0x60;
- } else if ((baudRate > 1572864) && (baudRate <= 3145728)) {
- *divisor = 3145728 / baudRate;
- *clk_sel_val = 0x70;
- }
- return 0;
-}
-
-static int ATEN2011_send_cmd_write_baud_rate(struct ATENINTL_port
- *ATEN2011_port, int baudRate)
-{
- int divisor = 0;
- int status;
- __u16 Data;
- unsigned char number;
- __u16 clk_sel_val;
- struct usb_serial_port *port;
- int minor;
-
- if (ATEN2011_port == NULL)
- return -1;
-
- port = (struct usb_serial_port *)ATEN2011_port->port;
-
- dbg("%s", "Entering .......... ");
-
- minor = ATEN2011_port->port->serial->minor;
- if (minor == SERIAL_TTY_NO_MINOR)
- minor = 0;
- number = ATEN2011_port->port->number - minor;
-
- dbg("%s - port = %d, baud = %d", __func__,
- ATEN2011_port->port->number, baudRate);
- /* reset clk_uart_sel in spregOffset */
- if (baudRate > 115200) {
-#ifdef HW_flow_control
- /*
- * NOTE: need to see the pther register to modify
- * setting h/w flow control bit to 1;
- */
- /* Data = ATEN2011_port->shadowMCR; */
- Data = 0x2b;
- ATEN2011_port->shadowMCR = Data;
- status = set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
- if (status < 0) {
- dbg("Writing spreg failed in set_serial_baud");
- return -1;
- }
-#endif
-
- } else {
-#ifdef HW_flow_control
- /* setting h/w flow control bit to 0; */
- /* Data = ATEN2011_port->shadowMCR; */
- Data = 0xb;
- ATEN2011_port->shadowMCR = Data;
- status = set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
- if (status < 0) {
- dbg("Writing spreg failed in set_serial_baud");
- return -1;
- }
-#endif
-
- }
-
- if (1) /* baudRate <= 115200) */ {
- clk_sel_val = 0x0;
- Data = 0x0;
- status =
- ATEN2011_calc_baud_rate_divisor(baudRate, &divisor,
- &clk_sel_val);
- status = get_reg_sync(port, ATEN2011_port->SpRegOffset, &Data);
- if (status < 0) {
- dbg("reading spreg failed in set_serial_baud");
- return -1;
- }
- Data = (Data & 0x8f) | clk_sel_val;
- status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data);
- if (status < 0) {
- dbg("Writing spreg failed in set_serial_baud");
- return -1;
- }
- /* Calculate the Divisor */
-
- if (status) {
- err("%s - bad baud rate", __func__);
- dbg("%s", "bad baud rate");
- return status;
- }
- /* Enable access to divisor latch */
- Data = ATEN2011_port->shadowLCR | SERIAL_LCR_DLAB;
- ATEN2011_port->shadowLCR = Data;
- set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
-
- /* Write the divisor */
- Data = (unsigned char)(divisor & 0xff);
- dbg("set_serial_baud Value to write DLL is %x", Data);
- set_uart_reg(port, DIVISOR_LATCH_LSB, Data);
-
- Data = (unsigned char)((divisor & 0xff00) >> 8);
- dbg("set_serial_baud Value to write DLM is %x", Data);
- set_uart_reg(port, DIVISOR_LATCH_MSB, Data);
-
- /* Disable access to divisor latch */
- Data = ATEN2011_port->shadowLCR & ~SERIAL_LCR_DLAB;
- ATEN2011_port->shadowLCR = Data;
- set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
-
- }
-
- return status;
-}
-
-static void ATEN2011_change_port_settings(struct tty_struct *tty,
- struct ATENINTL_port *ATEN2011_port,
- struct ktermios *old_termios)
-{
- int baud;
- unsigned cflag;
- unsigned iflag;
- __u8 lData;
- __u8 lParity;
- __u8 lStop;
- int status;
- __u16 Data;
- struct usb_serial_port *port;
- struct usb_serial *serial;
-
- if (ATEN2011_port == NULL)
- return;
-
- port = (struct usb_serial_port *)ATEN2011_port->port;
-
- serial = port->serial;
-
- dbg("%s - port %d", __func__, ATEN2011_port->port->number);
-
- if (!ATEN2011_port->open) {
- dbg("%s - port not opened", __func__);
- return;
- }
-
- if ((!tty) || (!tty->termios)) {
- dbg("%s - no tty structures", __func__);
- return;
- }
-
- dbg("%s", "Entering .......... ");
-
- lData = LCR_BITS_8;
- lStop = LCR_STOP_1;
- lParity = LCR_PAR_NONE;
-
- cflag = tty->termios->c_cflag;
- iflag = tty->termios->c_iflag;
-
- /* Change the number of bits */
-
- /* COMMENT1: the below Line"if(cflag & CSIZE)" is added for the errors we get for serial loop data test i.e serial_loopback.pl -v */
- /* if(cflag & CSIZE) */
- {
- switch (cflag & CSIZE) {
- case CS5:
- lData = LCR_BITS_5;
- break;
-
- case CS6:
- lData = LCR_BITS_6;
- break;
-
- case CS7:
- lData = LCR_BITS_7;
- break;
- default:
- case CS8:
- lData = LCR_BITS_8;
- break;
- }
- }
- /* Change the Parity bit */
- if (cflag & PARENB) {
- if (cflag & PARODD) {
- lParity = LCR_PAR_ODD;
- dbg("%s - parity = odd", __func__);
- } else {
- lParity = LCR_PAR_EVEN;
- dbg("%s - parity = even", __func__);
- }
-
- } else {
- dbg("%s - parity = none", __func__);
- }
-
- if (cflag & CMSPAR)
- lParity = lParity | 0x20;
-
- /* Change the Stop bit */
- if (cflag & CSTOPB) {
- lStop = LCR_STOP_2;
- dbg("%s - stop bits = 2", __func__);
- } else {
- lStop = LCR_STOP_1;
- dbg("%s - stop bits = 1", __func__);
- }
-
- /* Update the LCR with the correct value */
- ATEN2011_port->shadowLCR &=
- ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK);
- ATEN2011_port->shadowLCR |= (lData | lParity | lStop);
-
- dbg
- ("ATEN2011_change_port_settings ATEN2011_port->shadowLCR is %x",
- ATEN2011_port->shadowLCR);
- /* Disable Interrupts */
- Data = 0x00;
- set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
-
- Data = 0x00;
- set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
-
- Data = 0xcf;
- set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
-
- /* Send the updated LCR value to the ATEN2011 */
- Data = ATEN2011_port->shadowLCR;
-
- set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
-
- Data = 0x00b;
- ATEN2011_port->shadowMCR = Data;
- set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
- Data = 0x00b;
- set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
-
- /* set up the MCR register and send it to the ATEN2011 */
-
- ATEN2011_port->shadowMCR = MCR_MASTER_IE;
- if (cflag & CBAUD)
- ATEN2011_port->shadowMCR |= (MCR_DTR | MCR_RTS);
-
- if (cflag & CRTSCTS)
- ATEN2011_port->shadowMCR |= (MCR_XON_ANY);
- else
- ATEN2011_port->shadowMCR &= ~(MCR_XON_ANY);
-
- Data = ATEN2011_port->shadowMCR;
- set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
-
- /* Determine divisor based on baud rate */
- baud = tty_get_baud_rate(tty);
-
- if (!baud) {
- /* pick a default, any default... */
- dbg("%s", "Picked default baud...");
- baud = 9600;
- }
-
- dbg("%s - baud rate = %d", __func__, baud);
- status = ATEN2011_send_cmd_write_baud_rate(ATEN2011_port, baud);
-
- /* Enable Interrupts */
- Data = 0x0c;
- set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
-
- if (ATEN2011_port->read_urb->status != -EINPROGRESS) {
- ATEN2011_port->read_urb->dev = serial->dev;
-
- status = usb_submit_urb(ATEN2011_port->read_urb, GFP_ATOMIC);
-
- if (status) {
- dbg
- (" usb_submit_urb(read bulk) failed, status = %d",
- status);
- }
- }
- dbg
- ("ATEN2011_change_port_settings ATEN2011_port->shadowLCR is End %x",
- ATEN2011_port->shadowLCR);
-
- return;
-}
-
-static int ATEN2011_calc_num_ports(struct usb_serial *serial)
-{
-
- __u16 Data = 0x00;
- int ret = 0;
- int ATEN2011_2or4ports;
- ret = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
- ATEN_RDREQ, ATEN_RD_RTYPE, 0, GPIO_REGISTER,
- &Data, VENDOR_READ_LENGTH, ATEN_WDR_TIMEOUT);
-
-/* ghostgum: here is where the problem appears to bet */
-/* Which of the following are needed? */
-/* Greg used the serial->type->num_ports=2 */
-/* But the code in the ATEN2011_open relies on serial->num_ports=2 */
- if ((Data & 0x01) == 0) {
- ATEN2011_2or4ports = 2;
- serial->type->num_ports = 2;
- serial->num_ports = 2;
- }
- /* else if(serial->interface->cur_altsetting->desc.bNumEndpoints == 9) */
- else {
- ATEN2011_2or4ports = 4;
- serial->type->num_ports = 4;
- serial->num_ports = 4;
-
- }
-
- return ATEN2011_2or4ports;
-}
-
-static int ATEN2011_startup(struct usb_serial *serial)
-{
- struct ATENINTL_serial *ATEN2011_serial;
- struct ATENINTL_port *ATEN2011_port;
- struct usb_device *dev;
- int i, status;
- int minor;
-
- __u16 Data;
- dbg("%s", " ATEN2011_startup :entering..........");
-
- if (!serial) {
- dbg("%s", "Invalid Handler");
- return -1;
- }
-
- dev = serial->dev;
-
- dbg("%s", "Entering...");
-
- /* create our private serial structure */
- ATEN2011_serial = kzalloc(sizeof(struct ATENINTL_serial), GFP_KERNEL);
- if (ATEN2011_serial == NULL) {
- err("%s - Out of memory", __func__);
- return -ENOMEM;
- }
-
- /* resetting the private structure field values to zero */
- memset(ATEN2011_serial, 0, sizeof(struct ATENINTL_serial));
-
- ATEN2011_serial->serial = serial;
- /* initilize status polling flag to 0 */
- ATEN2011_serial->status_polling_started = 0;
-
- usb_set_serial_data(serial, ATEN2011_serial);
- ATEN2011_serial->ATEN2011_spectrum_2or4ports =
- ATEN2011_calc_num_ports(serial);
- /* we set up the pointers to the endpoints in the ATEN2011_open *
- * function, as the structures aren't created yet. */
-
- /* set up port private structures */
- for (i = 0; i < serial->num_ports; ++i) {
- ATEN2011_port =
- kmalloc(sizeof(struct ATENINTL_port), GFP_KERNEL);
- if (ATEN2011_port == NULL) {
- err("%s - Out of memory", __func__);
- usb_set_serial_data(serial, NULL);
- kfree(ATEN2011_serial);
- return -ENOMEM;
- }
- memset(ATEN2011_port, 0, sizeof(struct ATENINTL_port));
-
- /*
- * Initialize all port interrupt end point to port 0
- * int endpoint. Our device has only one interrupt end point
- * comman to all port
- */
- /* serial->port[i]->interrupt_in_endpointAddress = serial->port[0]->interrupt_in_endpointAddress; */
-
- ATEN2011_port->port = serial->port[i];
- usb_set_serial_port_data(serial->port[i], ATEN2011_port);
-
- minor = serial->port[i]->serial->minor;
- if (minor == SERIAL_TTY_NO_MINOR)
- minor = 0;
- ATEN2011_port->port_num =
- ((serial->port[i]->number - minor) + 1);
-
- if (ATEN2011_port->port_num == 1) {
- ATEN2011_port->SpRegOffset = 0x0;
- ATEN2011_port->ControlRegOffset = 0x1;
- ATEN2011_port->DcrRegOffset = 0x4;
- } else if ((ATEN2011_port->port_num == 2)
- && (ATEN2011_serial->ATEN2011_spectrum_2or4ports ==
- 4)) {
- ATEN2011_port->SpRegOffset = 0x8;
- ATEN2011_port->ControlRegOffset = 0x9;
- ATEN2011_port->DcrRegOffset = 0x16;
- } else if ((ATEN2011_port->port_num == 2)
- && (ATEN2011_serial->ATEN2011_spectrum_2or4ports ==
- 2)) {
- ATEN2011_port->SpRegOffset = 0xa;
- ATEN2011_port->ControlRegOffset = 0xb;
- ATEN2011_port->DcrRegOffset = 0x19;
- } else if ((ATEN2011_port->port_num == 3)
- && (ATEN2011_serial->ATEN2011_spectrum_2or4ports ==
- 4)) {
- ATEN2011_port->SpRegOffset = 0xa;
- ATEN2011_port->ControlRegOffset = 0xb;
- ATEN2011_port->DcrRegOffset = 0x19;
- } else if ((ATEN2011_port->port_num == 4)
- && (ATEN2011_serial->ATEN2011_spectrum_2or4ports ==
- 4)) {
- ATEN2011_port->SpRegOffset = 0xc;
- ATEN2011_port->ControlRegOffset = 0xd;
- ATEN2011_port->DcrRegOffset = 0x1c;
- }
-
- usb_set_serial_port_data(serial->port[i], ATEN2011_port);
-
- /* enable rx_disable bit in control register */
-
- status = get_reg_sync(serial->port[i],
- ATEN2011_port->ControlRegOffset, &Data);
- if (status < 0) {
- dbg("Reading ControlReg failed status-0x%x",
- status);
- break;
- } else
- dbg
- ("ControlReg Reading success val is %x, status%d",
- Data, status);
- Data |= 0x08; /* setting driver done bit */
- Data |= 0x04; /* sp1_bit to have cts change reflect in modem status reg */
-
- /* Data |= 0x20; */ /* rx_disable bit */
- status = set_reg_sync(serial->port[i],
- ATEN2011_port->ControlRegOffset, Data);
- if (status < 0) {
- dbg
- ("Writing ControlReg failed(rx_disable) status-0x%x",
- status);
- break;
- } else
- dbg
- ("ControlReg Writing success(rx_disable) status%d",
- status);
-
- /*
- * Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2
- * and 0x24 in DCR3
- */
- Data = 0x01;
- status = set_reg_sync(serial->port[i],
- (__u16)(ATEN2011_port->DcrRegOffset + 0),
- Data);
- if (status < 0) {
- dbg("Writing DCR0 failed status-0x%x", status);
- break;
- } else
- dbg("DCR0 Writing success status%d", status);
-
- Data = 0x05;
- status = set_reg_sync(serial->port[i],
- (__u16)(ATEN2011_port->DcrRegOffset + 1),
- Data);
- if (status < 0) {
- dbg("Writing DCR1 failed status-0x%x", status);
- break;
- } else
- dbg("DCR1 Writing success status%d", status);
-
- Data = 0x24;
- status = set_reg_sync(serial->port[i],
- (__u16)(ATEN2011_port->DcrRegOffset + 2),
- Data);
- if (status < 0) {
- dbg("Writing DCR2 failed status-0x%x", status);
- break;
- } else
- dbg("DCR2 Writing success status%d", status);
-
- /* write values in clkstart0x0 and clkmulti 0x20 */
- Data = 0x0;
- status = set_reg_sync(serial->port[i], CLK_START_VALUE_REGISTER,
- Data);
- if (status < 0) {
- dbg
- ("Writing CLK_START_VALUE_REGISTER failed status-0x%x",
- status);
- break;
- } else
- dbg
- ("CLK_START_VALUE_REGISTER Writing success status%d",
- status);
-
- Data = 0x20;
- status = set_reg_sync(serial->port[i], CLK_MULTI_REGISTER,
- Data);
- if (status < 0) {
- dbg
- ("Writing CLK_MULTI_REGISTER failed status-0x%x",
- status);
- break;
- } else
- dbg("CLK_MULTI_REGISTER Writing success status%d",
- status);
-
- /* Zero Length flag register */
- if ((ATEN2011_port->port_num != 1)
- && (ATEN2011_serial->ATEN2011_spectrum_2or4ports == 2)) {
-
- Data = 0xff;
- status = set_reg_sync(serial->port[i],
- (__u16)(ZLP_REG1 + ((__u16)ATEN2011_port->port_num)),
- Data);
- dbg("ZLIP offset%x",
- (__u16) (ZLP_REG1 +
- ((__u16) ATEN2011_port->port_num)));
- if (status < 0) {
- dbg
- ("Writing ZLP_REG%d failed status-0x%x",
- i + 2, status);
- break;
- } else
- dbg("ZLP_REG%d Writing success status%d",
- i + 2, status);
- } else {
- Data = 0xff;
- status = set_reg_sync(serial->port[i],
- (__u16)(ZLP_REG1 + ((__u16)ATEN2011_port->port_num) - 0x1),
- Data);
- dbg("ZLIP offset%x",
- (__u16) (ZLP_REG1 +
- ((__u16) ATEN2011_port->port_num) -
- 0x1));
- if (status < 0) {
- dbg
- ("Writing ZLP_REG%d failed status-0x%x",
- i + 1, status);
- break;
- } else
- dbg("ZLP_REG%d Writing success status%d",
- i + 1, status);
-
- }
- ATEN2011_port->control_urb = usb_alloc_urb(0, GFP_ATOMIC);
- ATEN2011_port->ctrl_buf = kmalloc(16, GFP_KERNEL);
-
- }
-
- /* Zero Length flag enable */
- Data = 0x0f;
- status = set_reg_sync(serial->port[0], ZLP_REG5, Data);
- if (status < 0) {
- dbg("Writing ZLP_REG5 failed status-0x%x", status);
- return -1;
- } else
- dbg("ZLP_REG5 Writing success status%d", status);
-
- /* setting configuration feature to one */
- usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
- (__u8) 0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5 * HZ);
- return 0;
-}
-
-static void ATEN2011_release(struct usb_serial *serial)
-{
- int i;
- struct ATENINTL_port *ATEN2011_port;
-
- /* check for the ports to be closed,close the ports and disconnect */
-
- /* free private structure allocated for serial port *
- * stop reads and writes on all ports */
-
- for (i = 0; i < serial->num_ports; ++i) {
- ATEN2011_port = usb_get_serial_port_data(serial->port[i]);
- kfree(ATEN2011_port->ctrl_buf);
- usb_kill_urb(ATEN2011_port->control_urb);
- kfree(ATEN2011_port);
- usb_set_serial_port_data(serial->port[i], NULL);
- }
-
- /* free private structure allocated for serial device */
-
- kfree(usb_get_serial_data(serial));
- usb_set_serial_data(serial, NULL);
-}
-
-static struct usb_serial_driver aten_serial_driver = {
- .driver = {
- .owner = THIS_MODULE,
- .name = "aten2011",
- },
- .description = DRIVER_DESC,
- .id_table = id_table,
- .open = ATEN2011_open,
- .close = ATEN2011_close,
- .write = ATEN2011_write,
- .write_room = ATEN2011_write_room,
- .chars_in_buffer = ATEN2011_chars_in_buffer,
- .throttle = ATEN2011_throttle,
- .unthrottle = ATEN2011_unthrottle,
- .calc_num_ports = ATEN2011_calc_num_ports,
-
- .ioctl = ATEN2011_ioctl,
- .set_termios = ATEN2011_set_termios,
- .break_ctl = ATEN2011_break,
- .tiocmget = ATEN2011_tiocmget,
- .tiocmset = ATEN2011_tiocmset,
- .attach = ATEN2011_startup,
- .release = ATEN2011_release,
- .read_bulk_callback = ATEN2011_bulk_in_callback,
- .read_int_callback = ATEN2011_interrupt_callback,
-};
-
-static struct usb_driver aten_driver = {
- .name = "aten2011",
- .probe = usb_serial_probe,
- .disconnect = usb_serial_disconnect,
- .id_table = id_table,
-};
-
-static int __init aten_init(void)
-{
- int retval;
-
- /* Register with the usb serial */
- retval = usb_serial_register(&aten_serial_driver);
- if (retval)
- return retval;
-
- printk(KERN_INFO KBUILD_MODNAME ":"
- DRIVER_DESC " " DRIVER_VERSION "\n");
-
- /* Register with the usb */
- retval = usb_register(&aten_driver);
- if (retval)
- usb_serial_deregister(&aten_serial_driver);
-
- return retval;
-}
-
-static void __exit aten_exit(void)
-{
- usb_deregister(&aten_driver);
- usb_serial_deregister(&aten_serial_driver);
-}
-
-module_init(aten_init);
-module_exit(aten_exit);
-
-/* Module information */
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
-
-MODULE_PARM_DESC(debug, "Debug enabled or not");
#include <linux/mm.h>
#include <linux/fb.h>
#include <linux/mutex.h>
+#include <linux/vmalloc.h>
#include "udlfb.h"
mutex_lock(&tz->lock);
- tz->ops->get_temp(tz, &temp);
+ if (tz->ops->get_temp(tz, &temp)) {
+ /* get_temp failed - retry it later */
+ printk(KERN_WARNING PREFIX "failed to read out thermal zone "
+ "%d\n", tz->id);
+ goto leave;
+ }
for (count = 0; count < tz->trips; count++) {
tz->ops->get_trip_type(tz, count, &trip_type);
THERMAL_TRIPS_NONE);
tz->last_temperature = temp;
+
+ leave:
if (tz->passive)
thermal_zone_device_set_polling(tz, tz->passive_delay);
else if (tz->polling_delay)
struct acm_ru *rcv;
unsigned long flags;
unsigned char throttled;
- struct usb_host_endpoint *ep;
dbg("Entering acm_rx_tasklet");
rcv->buffer = buf;
- ep = (usb_pipein(acm->rx_endpoint) ? acm->dev->ep_in : acm->dev->ep_out)
- [usb_pipeendpoint(acm->rx_endpoint)];
- if (usb_endpoint_xfer_int(&ep->desc))
+ if (acm->is_int_ep)
usb_fill_int_urb(rcv->urb, acm->dev,
acm->rx_endpoint,
buf->base,
acm->readsize,
- acm_read_bulk, rcv, ep->desc.bInterval);
+ acm_read_bulk, rcv, acm->bInterval);
else
usb_fill_bulk_urb(rcv->urb, acm->dev,
acm->rx_endpoint,
{
struct acm *acm = tty->driver_data;
if (!ACM_READY(acm))
- return -EINVAL;
+ return 0;
/*
* This is inaccurate (overcounts), but it works.
*/
spin_lock_init(&acm->read_lock);
mutex_init(&acm->mutex);
acm->rx_endpoint = usb_rcvbulkpipe(usb_dev, epread->bEndpointAddress);
+ acm->is_int_ep = usb_endpoint_xfer_int(epread);
+ if (acm->is_int_ep)
+ acm->bInterval = epread->bInterval;
tty_port_init(&acm->port);
acm->port.ops = &acm_port_ops;
unsigned int ctrl_caps; /* control capabilities from the class specific header */
unsigned int susp_count; /* number of suspended interfaces */
int combined_interfaces:1; /* control and data collapsed */
+ int is_int_ep:1; /* interrupt endpoints contrary to spec used */
+ u8 bInterval;
struct acm_wb *delayed_wb; /* write queued for a device about to be woken */
};
int max_tx;
int i;
- /* Allocate space for the SS endpoint companion descriptor */
- ep->ss_ep_comp = kzalloc(sizeof(struct usb_host_ss_ep_comp),
- GFP_KERNEL);
- if (!ep->ss_ep_comp)
- return -ENOMEM;
desc = (struct usb_ss_ep_comp_descriptor *) buffer;
if (desc->bDescriptorType != USB_DT_SS_ENDPOINT_COMP) {
dev_warn(ddev, "No SuperSpeed endpoint companion for config %d "
" interface %d altsetting %d ep %d: "
"using minimum values\n",
cfgno, inum, asnum, ep->desc.bEndpointAddress);
- ep->ss_ep_comp->desc.bLength = USB_DT_SS_EP_COMP_SIZE;
- ep->ss_ep_comp->desc.bDescriptorType = USB_DT_SS_ENDPOINT_COMP;
- ep->ss_ep_comp->desc.bMaxBurst = 0;
- /*
- * Leave bmAttributes as zero, which will mean no streams for
- * bulk, and isoc won't support multiple bursts of packets.
- * With bursts of only one packet, and a Mult of 1, the max
- * amount of data moved per endpoint service interval is one
- * packet.
- */
- if (usb_endpoint_xfer_isoc(&ep->desc) ||
- usb_endpoint_xfer_int(&ep->desc))
- ep->ss_ep_comp->desc.wBytesPerInterval =
- ep->desc.wMaxPacketSize;
/*
* The next descriptor is for an Endpoint or Interface,
* no extra descriptors to copy into the companion structure,
* and we didn't eat up any of the buffer.
*/
- retval = 0;
- goto valid;
+ return 0;
}
memcpy(&ep->ss_ep_comp->desc, desc, USB_DT_SS_EP_COMP_SIZE);
desc = &ep->ss_ep_comp->desc;
buffer += i;
size -= i;
+ /* Allocate space for the SS endpoint companion descriptor */
+ endpoint->ss_ep_comp = kzalloc(sizeof(struct usb_host_ss_ep_comp),
+ GFP_KERNEL);
+ if (!endpoint->ss_ep_comp)
+ return -ENOMEM;
+
+ /* Fill in some default values (may be overwritten later) */
+ endpoint->ss_ep_comp->desc.bLength = USB_DT_SS_EP_COMP_SIZE;
+ endpoint->ss_ep_comp->desc.bDescriptorType = USB_DT_SS_ENDPOINT_COMP;
+ endpoint->ss_ep_comp->desc.bMaxBurst = 0;
+ /*
+ * Leave bmAttributes as zero, which will mean no streams for
+ * bulk, and isoc won't support multiple bursts of packets.
+ * With bursts of only one packet, and a Mult of 1, the max
+ * amount of data moved per endpoint service interval is one
+ * packet.
+ */
+ if (usb_endpoint_xfer_isoc(&endpoint->desc) ||
+ usb_endpoint_xfer_int(&endpoint->desc))
+ endpoint->ss_ep_comp->desc.wBytesPerInterval =
+ endpoint->desc.wMaxPacketSize;
+
if (size > 0) {
retval = usb_parse_ss_endpoint_companion(ddev, cfgno,
inum, asnum, endpoint, num_ep, buffer,
retval = buffer - buffer0;
}
} else {
+ dev_warn(ddev, "config %d interface %d altsetting %d "
+ "endpoint 0x%X has no "
+ "SuperSpeed companion descriptor\n",
+ cfgno, inum, asnum, d->bEndpointAddress);
retval = buffer - buffer0;
}
} else {
if (!ps)
goto out;
- ret = -ENOENT;
+ ret = -ENODEV;
/* usbdev device-node */
if (imajor(inode) == USB_DEVICE_MAJOR)
struct usbdevfs_urb32 __user *uurb)
{
__u32 uptr;
- if (get_user(kurb->type, &uurb->type) ||
+ if (!access_ok(VERIFY_READ, uurb, sizeof(*uurb)) ||
+ __get_user(kurb->type, &uurb->type) ||
__get_user(kurb->endpoint, &uurb->endpoint) ||
__get_user(kurb->status, &uurb->status) ||
__get_user(kurb->flags, &uurb->flags) ||
u32 udata;
uioc = compat_ptr((long)arg);
- if (get_user(ctrl.ifno, &uioc->ifno) ||
- get_user(ctrl.ioctl_code, &uioc->ioctl_code) ||
+ if (!access_ok(VERIFY_READ, uioc, sizeof(*uioc)) ||
+ __get_user(ctrl.ifno, &uioc->ifno) ||
+ __get_user(ctrl.ioctl_code, &uioc->ioctl_code) ||
__get_user(udata, &uioc->data))
return -EFAULT;
ctrl.data = compat_ptr(udata);
/* already started */
break;
case QH_STATE_IDLE:
- WARN_ON(1);
+ /* QH might be waiting for a Clear-TT-Buffer */
+ qh_completions(ehci, qh);
break;
}
break;
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
int retval;
+ ehci_reset(ehci);
retval = ehci_halt(ehci);
if (retval)
return retval;
hcd->has_tt = 1;
- ehci_reset(ehci);
ehci_port_power(ehci, 0);
return retval;
*/
if ((token & QTD_STS_XACT) &&
QTD_CERR(token) == 0 &&
- --qh->xacterrs > 0 &&
+ ++qh->xacterrs < QH_XACTERR_MAX &&
!urb->unlinked) {
ehci_dbg(ehci,
"detected XactErr len %zu/%zu retry %d\n",
- qtd->length - QTD_LENGTH(token), qtd->length,
- QH_XACTERR_MAX - qh->xacterrs);
+ qtd->length - QTD_LENGTH(token), qtd->length, qh->xacterrs);
/* reset the token in the qtd and the
* qh overlay (which still contains
last = qtd;
/* reinit the xacterr counter for the next qtd */
- qh->xacterrs = QH_XACTERR_MAX;
+ qh->xacterrs = 0;
}
/* last urb's completion might still need calling */
head->qh_next.qh = qh;
head->hw_next = dma;
- qh->xacterrs = QH_XACTERR_MAX;
+ qh_get(qh);
+ qh->xacterrs = 0;
qh->qh_state = QH_STATE_LINKED;
/* qtd completions reported later by interrupt */
}
* the HC and TT handle it when the TT has a buffer ready.
*/
if (likely (qh->qh_state == QH_STATE_IDLE))
- qh_link_async (ehci, qh_get (qh));
+ qh_link_async(ehci, qh);
done:
spin_unlock_irqrestore (&ehci->lock, flags);
if (unlikely (qh == NULL))
&& HC_IS_RUNNING (ehci_to_hcd(ehci)->state))
qh_link_async (ehci, qh);
else {
- qh_put (qh); // refcount from async list
-
/* it's not free to turn the async schedule on/off; leave it
* active but idle for a while once it empties.
*/
&& ehci->async->qh_next.qh == NULL)
timer_action (ehci, TIMER_ASYNC_OFF);
}
+ qh_put(qh); /* refcount from async list */
if (next) {
ehci->reclaim = NULL;
}
}
qh->qh_state = QH_STATE_LINKED;
+ qh->xacterrs = 0;
qh_get (qh);
/* update per-qh bandwidth for usbfs */
static void ohci_omap_stop(struct usb_hcd *hcd)
{
dev_dbg(hcd->self.controller, "stopping USB Controller\n");
+ ohci_stop(hcd);
omap_ohci_clock_power(0);
}
{
void *addr;
u32 temp;
+ u64 temp_64;
addr = &ir_set->irq_pending;
temp = xhci_readl(xhci, addr);
xhci_dbg(xhci, " WARN: %p: ir_set.rsvd = 0x%x\n",
addr, (unsigned int)temp);
- addr = &ir_set->erst_base[0];
- temp = xhci_readl(xhci, addr);
- xhci_dbg(xhci, " %p: ir_set.erst_base[0] = 0x%x\n",
- addr, (unsigned int) temp);
-
- addr = &ir_set->erst_base[1];
- temp = xhci_readl(xhci, addr);
- xhci_dbg(xhci, " %p: ir_set.erst_base[1] = 0x%x\n",
- addr, (unsigned int) temp);
+ addr = &ir_set->erst_base;
+ temp_64 = xhci_read_64(xhci, addr);
+ xhci_dbg(xhci, " %p: ir_set.erst_base = @%08llx\n",
+ addr, temp_64);
- addr = &ir_set->erst_dequeue[0];
- temp = xhci_readl(xhci, addr);
- xhci_dbg(xhci, " %p: ir_set.erst_dequeue[0] = 0x%x\n",
- addr, (unsigned int) temp);
-
- addr = &ir_set->erst_dequeue[1];
- temp = xhci_readl(xhci, addr);
- xhci_dbg(xhci, " %p: ir_set.erst_dequeue[1] = 0x%x\n",
- addr, (unsigned int) temp);
+ addr = &ir_set->erst_dequeue;
+ temp_64 = xhci_read_64(xhci, addr);
+ xhci_dbg(xhci, " %p: ir_set.erst_dequeue = @%08llx\n",
+ addr, temp_64);
}
void xhci_print_run_regs(struct xhci_hcd *xhci)
xhci_dbg(xhci, "Link TRB:\n");
xhci_print_trb_offsets(xhci, trb);
- address = trb->link.segment_ptr[0] +
- (((u64) trb->link.segment_ptr[1]) << 32);
+ address = trb->link.segment_ptr;
xhci_dbg(xhci, "Next ring segment DMA address = 0x%llx\n", address);
xhci_dbg(xhci, "Interrupter target = 0x%x\n",
(unsigned int) (trb->link.control & TRB_NO_SNOOP));
break;
case TRB_TYPE(TRB_TRANSFER):
- address = trb->trans_event.buffer[0] +
- (((u64) trb->trans_event.buffer[1]) << 32);
+ address = trb->trans_event.buffer;
/*
* FIXME: look at flags to figure out if it's an address or if
* the data is directly in the buffer field.
xhci_dbg(xhci, "DMA address or buffer contents= %llu\n", address);
break;
case TRB_TYPE(TRB_COMPLETION):
- address = trb->event_cmd.cmd_trb[0] +
- (((u64) trb->event_cmd.cmd_trb[1]) << 32);
+ address = trb->event_cmd.cmd_trb;
xhci_dbg(xhci, "Command TRB pointer = %llu\n", address);
xhci_dbg(xhci, "Completion status = %u\n",
(unsigned int) GET_COMP_CODE(trb->event_cmd.status));
for (i = 0; i < TRBS_PER_SEGMENT; ++i) {
trb = &seg->trbs[i];
xhci_dbg(xhci, "@%08x %08x %08x %08x %08x\n", addr,
- (unsigned int) trb->link.segment_ptr[0],
- (unsigned int) trb->link.segment_ptr[1],
+ lower_32_bits(trb->link.segment_ptr),
+ upper_32_bits(trb->link.segment_ptr),
(unsigned int) trb->link.intr_target,
(unsigned int) trb->link.control);
addr += sizeof(*trb);
entry = &erst->entries[i];
xhci_dbg(xhci, "@%08x %08x %08x %08x %08x\n",
(unsigned int) addr,
- (unsigned int) entry->seg_addr[0],
- (unsigned int) entry->seg_addr[1],
+ lower_32_bits(entry->seg_addr),
+ upper_32_bits(entry->seg_addr),
(unsigned int) entry->seg_size,
(unsigned int) entry->rsvd);
addr += sizeof(*entry);
void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci)
{
- u32 val;
+ u64 val;
- val = xhci_readl(xhci, &xhci->op_regs->cmd_ring[0]);
- xhci_dbg(xhci, "// xHC command ring deq ptr low bits + flags = 0x%x\n", val);
- val = xhci_readl(xhci, &xhci->op_regs->cmd_ring[1]);
- xhci_dbg(xhci, "// xHC command ring deq ptr high bits = 0x%x\n", val);
+ val = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
+ xhci_dbg(xhci, "// xHC command ring deq ptr low bits + flags = @%08x\n",
+ lower_32_bits(val));
+ xhci_dbg(xhci, "// xHC command ring deq ptr high bits = @%08x\n",
+ upper_32_bits(val));
}
-void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_device_control *ctx, dma_addr_t dma, unsigned int last_ep)
+/* Print the last 32 bytes for 64-byte contexts */
+static void dbg_rsvd64(struct xhci_hcd *xhci, u64 *ctx, dma_addr_t dma)
+{
+ int i;
+ for (i = 0; i < 4; ++i) {
+ xhci_dbg(xhci, "@%p (virt) @%08llx "
+ "(dma) %#08llx - rsvd64[%d]\n",
+ &ctx[4 + i], (unsigned long long)dma,
+ ctx[4 + i], i);
+ dma += 8;
+ }
+}
+
+void xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx)
{
- int i, j;
- int last_ep_ctx = 31;
/* Fields are 32 bits wide, DMA addresses are in bytes */
int field_size = 32 / 8;
+ int i;
- xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - drop flags\n",
- &ctx->drop_flags, (unsigned long long)dma,
- ctx->drop_flags);
- dma += field_size;
- xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - add flags\n",
- &ctx->add_flags, (unsigned long long)dma,
- ctx->add_flags);
- dma += field_size;
- for (i = 0; i > 6; ++i) {
- xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n",
- &ctx->rsvd[i], (unsigned long long)dma,
- ctx->rsvd[i], i);
- dma += field_size;
- }
+ struct xhci_slot_ctx *slot_ctx = xhci_get_slot_ctx(xhci, ctx);
+ dma_addr_t dma = ctx->dma + ((unsigned long)slot_ctx - (unsigned long)ctx);
+ int csz = HCC_64BYTE_CONTEXT(xhci->hcc_params);
xhci_dbg(xhci, "Slot Context:\n");
xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_info\n",
- &ctx->slot.dev_info,
- (unsigned long long)dma, ctx->slot.dev_info);
+ &slot_ctx->dev_info,
+ (unsigned long long)dma, slot_ctx->dev_info);
dma += field_size;
xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_info2\n",
- &ctx->slot.dev_info2,
- (unsigned long long)dma, ctx->slot.dev_info2);
+ &slot_ctx->dev_info2,
+ (unsigned long long)dma, slot_ctx->dev_info2);
dma += field_size;
xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - tt_info\n",
- &ctx->slot.tt_info,
- (unsigned long long)dma, ctx->slot.tt_info);
+ &slot_ctx->tt_info,
+ (unsigned long long)dma, slot_ctx->tt_info);
dma += field_size;
xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_state\n",
- &ctx->slot.dev_state,
- (unsigned long long)dma, ctx->slot.dev_state);
+ &slot_ctx->dev_state,
+ (unsigned long long)dma, slot_ctx->dev_state);
dma += field_size;
- for (i = 0; i > 4; ++i) {
+ for (i = 0; i < 4; ++i) {
xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n",
- &ctx->slot.reserved[i], (unsigned long long)dma,
- ctx->slot.reserved[i], i);
+ &slot_ctx->reserved[i], (unsigned long long)dma,
+ slot_ctx->reserved[i], i);
dma += field_size;
}
+ if (csz)
+ dbg_rsvd64(xhci, (u64 *)slot_ctx, dma);
+}
+
+void xhci_dbg_ep_ctx(struct xhci_hcd *xhci,
+ struct xhci_container_ctx *ctx,
+ unsigned int last_ep)
+{
+ int i, j;
+ int last_ep_ctx = 31;
+ /* Fields are 32 bits wide, DMA addresses are in bytes */
+ int field_size = 32 / 8;
+ int csz = HCC_64BYTE_CONTEXT(xhci->hcc_params);
+
if (last_ep < 31)
last_ep_ctx = last_ep + 1;
for (i = 0; i < last_ep_ctx; ++i) {
+ struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, ctx, i);
+ dma_addr_t dma = ctx->dma +
+ ((unsigned long)ep_ctx - (unsigned long)ctx);
+
xhci_dbg(xhci, "Endpoint %02d Context:\n", i);
xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - ep_info\n",
- &ctx->ep[i].ep_info,
- (unsigned long long)dma, ctx->ep[i].ep_info);
+ &ep_ctx->ep_info,
+ (unsigned long long)dma, ep_ctx->ep_info);
dma += field_size;
xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - ep_info2\n",
- &ctx->ep[i].ep_info2,
- (unsigned long long)dma, ctx->ep[i].ep_info2);
- dma += field_size;
- xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - deq[0]\n",
- &ctx->ep[i].deq[0],
- (unsigned long long)dma, ctx->ep[i].deq[0]);
- dma += field_size;
- xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - deq[1]\n",
- &ctx->ep[i].deq[1],
- (unsigned long long)dma, ctx->ep[i].deq[1]);
+ &ep_ctx->ep_info2,
+ (unsigned long long)dma, ep_ctx->ep_info2);
dma += field_size;
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08llx - deq\n",
+ &ep_ctx->deq,
+ (unsigned long long)dma, ep_ctx->deq);
+ dma += 2*field_size;
xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - tx_info\n",
- &ctx->ep[i].tx_info,
- (unsigned long long)dma, ctx->ep[i].tx_info);
+ &ep_ctx->tx_info,
+ (unsigned long long)dma, ep_ctx->tx_info);
dma += field_size;
for (j = 0; j < 3; ++j) {
xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n",
- &ctx->ep[i].reserved[j],
+ &ep_ctx->reserved[j],
(unsigned long long)dma,
- ctx->ep[i].reserved[j], j);
+ ep_ctx->reserved[j], j);
+ dma += field_size;
+ }
+
+ if (csz)
+ dbg_rsvd64(xhci, (u64 *)ep_ctx, dma);
+ }
+}
+
+void xhci_dbg_ctx(struct xhci_hcd *xhci,
+ struct xhci_container_ctx *ctx,
+ unsigned int last_ep)
+{
+ int i;
+ /* Fields are 32 bits wide, DMA addresses are in bytes */
+ int field_size = 32 / 8;
+ struct xhci_slot_ctx *slot_ctx;
+ dma_addr_t dma = ctx->dma;
+ int csz = HCC_64BYTE_CONTEXT(xhci->hcc_params);
+
+ if (ctx->type == XHCI_CTX_TYPE_INPUT) {
+ struct xhci_input_control_ctx *ctrl_ctx =
+ xhci_get_input_control_ctx(xhci, ctx);
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - drop flags\n",
+ &ctrl_ctx->drop_flags, (unsigned long long)dma,
+ ctrl_ctx->drop_flags);
+ dma += field_size;
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - add flags\n",
+ &ctrl_ctx->add_flags, (unsigned long long)dma,
+ ctrl_ctx->add_flags);
+ dma += field_size;
+ for (i = 0; i < 6; ++i) {
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd2[%d]\n",
+ &ctrl_ctx->rsvd2[i], (unsigned long long)dma,
+ ctrl_ctx->rsvd2[i], i);
dma += field_size;
}
+
+ if (csz)
+ dbg_rsvd64(xhci, (u64 *)ctrl_ctx, dma);
}
+
+ slot_ctx = xhci_get_slot_ctx(xhci, ctx);
+ xhci_dbg_slot_ctx(xhci, ctx);
+ xhci_dbg_ep_ctx(xhci, ctx, last_ep);
}
u32 state;
state = xhci_readl(xhci, &xhci->op_regs->status);
- BUG_ON((state & STS_HALT) == 0);
+ if ((state & STS_HALT) == 0) {
+ xhci_warn(xhci, "Host controller not halted, aborting reset.\n");
+ return 0;
+ }
xhci_dbg(xhci, "// Reset the HC\n");
command = xhci_readl(xhci, &xhci->op_regs->command);
static void xhci_work(struct xhci_hcd *xhci)
{
u32 temp;
+ u64 temp_64;
/*
* Clear the op reg interrupt status first,
/* FIXME this should be a delayed service routine that clears the EHB */
xhci_handle_event(xhci);
- /* Clear the event handler busy flag; the event ring should be empty. */
- temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]);
- xhci_writel(xhci, temp & ~ERST_EHB, &xhci->ir_set->erst_dequeue[0]);
+ /* Clear the event handler busy flag (RW1C); the event ring should be empty. */
+ temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+ xhci_write_64(xhci, temp_64 | ERST_EHB, &xhci->ir_set->erst_dequeue);
/* Flush posted writes -- FIXME is this necessary? */
xhci_readl(xhci, &xhci->ir_set->irq_pending);
}
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
u32 temp, temp2;
+ union xhci_trb *trb;
spin_lock(&xhci->lock);
+ trb = xhci->event_ring->dequeue;
/* Check if the xHC generated the interrupt, or the irq is shared */
temp = xhci_readl(xhci, &xhci->op_regs->status);
temp2 = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+ if (temp == 0xffffffff && temp2 == 0xffffffff)
+ goto hw_died;
+
if (!(temp & STS_EINT) && !ER_IRQ_PENDING(temp2)) {
spin_unlock(&xhci->lock);
return IRQ_NONE;
}
+ xhci_dbg(xhci, "op reg status = %08x\n", temp);
+ xhci_dbg(xhci, "ir set irq_pending = %08x\n", temp2);
+ xhci_dbg(xhci, "Event ring dequeue ptr:\n");
+ xhci_dbg(xhci, "@%llx %08x %08x %08x %08x\n",
+ (unsigned long long)xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, trb),
+ lower_32_bits(trb->link.segment_ptr),
+ upper_32_bits(trb->link.segment_ptr),
+ (unsigned int) trb->link.intr_target,
+ (unsigned int) trb->link.control);
if (temp & STS_FATAL) {
xhci_warn(xhci, "WARNING: Host System Error\n");
xhci_halt(xhci);
+hw_died:
xhci_to_hcd(xhci)->state = HC_STATE_HALT;
spin_unlock(&xhci->lock);
return -ESHUTDOWN;
{
unsigned long flags;
int temp;
+ u64 temp_64;
struct xhci_hcd *xhci = (struct xhci_hcd *) arg;
int i, j;
xhci_dbg(xhci, "Event ring:\n");
xhci_debug_segment(xhci, xhci->event_ring->deq_seg);
xhci_dbg_ring_ptrs(xhci, xhci->event_ring);
- temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]);
- temp &= ERST_PTR_MASK;
- xhci_dbg(xhci, "ERST deq = 0x%x\n", temp);
+ temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+ temp_64 &= ~ERST_PTR_MASK;
+ xhci_dbg(xhci, "ERST deq = 64'h%0lx\n", (long unsigned int) temp_64);
xhci_dbg(xhci, "Command ring:\n");
xhci_debug_segment(xhci, xhci->cmd_ring->deq_seg);
xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring);
int xhci_run(struct usb_hcd *hcd)
{
u32 temp;
+ u64 temp_64;
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
void (*doorbell)(struct xhci_hcd *) = NULL;
add_timer(&xhci->event_ring_timer);
#endif
+ xhci_dbg(xhci, "Command ring memory map follows:\n");
+ xhci_debug_ring(xhci, xhci->cmd_ring);
+ xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring);
+ xhci_dbg_cmd_ptrs(xhci);
+
+ xhci_dbg(xhci, "ERST memory map follows:\n");
+ xhci_dbg_erst(xhci, &xhci->erst);
+ xhci_dbg(xhci, "Event ring:\n");
+ xhci_debug_ring(xhci, xhci->event_ring);
+ xhci_dbg_ring_ptrs(xhci, xhci->event_ring);
+ temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+ temp_64 &= ~ERST_PTR_MASK;
+ xhci_dbg(xhci, "ERST deq = 64'h%0lx\n", (long unsigned int) temp_64);
+
xhci_dbg(xhci, "// Set the interrupt modulation register\n");
temp = xhci_readl(xhci, &xhci->ir_set->irq_control);
temp &= ~ER_IRQ_INTERVAL_MASK;
if (NUM_TEST_NOOPS > 0)
doorbell = xhci_setup_one_noop(xhci);
- xhci_dbg(xhci, "Command ring memory map follows:\n");
- xhci_debug_ring(xhci, xhci->cmd_ring);
- xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring);
- xhci_dbg_cmd_ptrs(xhci);
-
- xhci_dbg(xhci, "ERST memory map follows:\n");
- xhci_dbg_erst(xhci, &xhci->erst);
- xhci_dbg(xhci, "Event ring:\n");
- xhci_debug_ring(xhci, xhci->event_ring);
- xhci_dbg_ring_ptrs(xhci, xhci->event_ring);
- temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]);
- temp &= ERST_PTR_MASK;
- xhci_dbg(xhci, "ERST deq = 0x%x\n", temp);
- temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[1]);
- xhci_dbg(xhci, "ERST deq upper = 0x%x\n", temp);
-
temp = xhci_readl(xhci, &xhci->op_regs->command);
temp |= (CMD_RUN);
xhci_dbg(xhci, "// Turn on HC, cmd = 0x%x.\n",
goto exit;
}
if (usb_endpoint_xfer_control(&urb->ep->desc))
- ret = xhci_queue_ctrl_tx(xhci, mem_flags, urb,
+ /* We have a spinlock and interrupts disabled, so we must pass
+ * atomic context to this function, which may allocate memory.
+ */
+ ret = xhci_queue_ctrl_tx(xhci, GFP_ATOMIC, urb,
slot_id, ep_index);
else if (usb_endpoint_xfer_bulk(&urb->ep->desc))
- ret = xhci_queue_bulk_tx(xhci, mem_flags, urb,
+ ret = xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb,
slot_id, ep_index);
else
ret = -EINVAL;
goto done;
xhci_dbg(xhci, "Cancel URB %p\n", urb);
+ xhci_dbg(xhci, "Event ring:\n");
+ xhci_debug_ring(xhci, xhci->event_ring);
ep_index = xhci_get_endpoint_index(&urb->ep->desc);
ep_ring = xhci->devs[urb->dev->slot_id]->ep_rings[ep_index];
+ xhci_dbg(xhci, "Endpoint ring:\n");
+ xhci_debug_ring(xhci, ep_ring);
td = (struct xhci_td *) urb->hcpriv;
ep_ring->cancels_pending++;
struct usb_host_endpoint *ep)
{
struct xhci_hcd *xhci;
- struct xhci_device_control *in_ctx;
+ struct xhci_container_ctx *in_ctx, *out_ctx;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ struct xhci_slot_ctx *slot_ctx;
unsigned int last_ctx;
unsigned int ep_index;
struct xhci_ep_ctx *ep_ctx;
}
in_ctx = xhci->devs[udev->slot_id]->in_ctx;
+ out_ctx = xhci->devs[udev->slot_id]->out_ctx;
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
ep_index = xhci_get_endpoint_index(&ep->desc);
- ep_ctx = &xhci->devs[udev->slot_id]->out_ctx->ep[ep_index];
+ ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
/* If the HC already knows the endpoint is disabled,
* or the HCD has noted it is disabled, ignore this request
*/
if ((ep_ctx->ep_info & EP_STATE_MASK) == EP_STATE_DISABLED ||
- in_ctx->drop_flags & xhci_get_endpoint_flag(&ep->desc)) {
+ ctrl_ctx->drop_flags & xhci_get_endpoint_flag(&ep->desc)) {
xhci_warn(xhci, "xHCI %s called with disabled ep %p\n",
__func__, ep);
return 0;
}
- in_ctx->drop_flags |= drop_flag;
- new_drop_flags = in_ctx->drop_flags;
+ ctrl_ctx->drop_flags |= drop_flag;
+ new_drop_flags = ctrl_ctx->drop_flags;
- in_ctx->add_flags = ~drop_flag;
- new_add_flags = in_ctx->add_flags;
+ ctrl_ctx->add_flags = ~drop_flag;
+ new_add_flags = ctrl_ctx->add_flags;
- last_ctx = xhci_last_valid_endpoint(in_ctx->add_flags);
+ last_ctx = xhci_last_valid_endpoint(ctrl_ctx->add_flags);
+ slot_ctx = xhci_get_slot_ctx(xhci, in_ctx);
/* Update the last valid endpoint context, if we deleted the last one */
- if ((in_ctx->slot.dev_info & LAST_CTX_MASK) > LAST_CTX(last_ctx)) {
- in_ctx->slot.dev_info &= ~LAST_CTX_MASK;
- in_ctx->slot.dev_info |= LAST_CTX(last_ctx);
+ if ((slot_ctx->dev_info & LAST_CTX_MASK) > LAST_CTX(last_ctx)) {
+ slot_ctx->dev_info &= ~LAST_CTX_MASK;
+ slot_ctx->dev_info |= LAST_CTX(last_ctx);
}
- new_slot_info = in_ctx->slot.dev_info;
+ new_slot_info = slot_ctx->dev_info;
xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep);
struct usb_host_endpoint *ep)
{
struct xhci_hcd *xhci;
- struct xhci_device_control *in_ctx;
+ struct xhci_container_ctx *in_ctx, *out_ctx;
unsigned int ep_index;
struct xhci_ep_ctx *ep_ctx;
+ struct xhci_slot_ctx *slot_ctx;
+ struct xhci_input_control_ctx *ctrl_ctx;
u32 added_ctxs;
unsigned int last_ctx;
u32 new_add_flags, new_drop_flags, new_slot_info;
int ret = 0;
ret = xhci_check_args(hcd, udev, ep, 1, __func__);
- if (ret <= 0)
+ if (ret <= 0) {
+ /* So we won't queue a reset ep command for a root hub */
+ ep->hcpriv = NULL;
return ret;
+ }
xhci = hcd_to_xhci(hcd);
added_ctxs = xhci_get_endpoint_flag(&ep->desc);
}
in_ctx = xhci->devs[udev->slot_id]->in_ctx;
+ out_ctx = xhci->devs[udev->slot_id]->out_ctx;
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
ep_index = xhci_get_endpoint_index(&ep->desc);
- ep_ctx = &xhci->devs[udev->slot_id]->out_ctx->ep[ep_index];
+ ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
/* If the HCD has already noted the endpoint is enabled,
* ignore this request.
*/
- if (in_ctx->add_flags & xhci_get_endpoint_flag(&ep->desc)) {
+ if (ctrl_ctx->add_flags & xhci_get_endpoint_flag(&ep->desc)) {
xhci_warn(xhci, "xHCI %s called with enabled ep %p\n",
__func__, ep);
return 0;
return -ENOMEM;
}
- in_ctx->add_flags |= added_ctxs;
- new_add_flags = in_ctx->add_flags;
+ ctrl_ctx->add_flags |= added_ctxs;
+ new_add_flags = ctrl_ctx->add_flags;
/* If xhci_endpoint_disable() was called for this endpoint, but the
* xHC hasn't been notified yet through the check_bandwidth() call,
* descriptors. We must drop and re-add this endpoint, so we leave the
* drop flags alone.
*/
- new_drop_flags = in_ctx->drop_flags;
+ new_drop_flags = ctrl_ctx->drop_flags;
+ slot_ctx = xhci_get_slot_ctx(xhci, in_ctx);
/* Update the last valid endpoint context, if we just added one past */
- if ((in_ctx->slot.dev_info & LAST_CTX_MASK) < LAST_CTX(last_ctx)) {
- in_ctx->slot.dev_info &= ~LAST_CTX_MASK;
- in_ctx->slot.dev_info |= LAST_CTX(last_ctx);
+ if ((slot_ctx->dev_info & LAST_CTX_MASK) < LAST_CTX(last_ctx)) {
+ slot_ctx->dev_info &= ~LAST_CTX_MASK;
+ slot_ctx->dev_info |= LAST_CTX(last_ctx);
}
- new_slot_info = in_ctx->slot.dev_info;
+ new_slot_info = slot_ctx->dev_info;
+
+ /* Store the usb_device pointer for later use */
+ ep->hcpriv = udev;
xhci_dbg(xhci, "add ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x, new slot info = %#x\n",
(unsigned int) ep->desc.bEndpointAddress,
return 0;
}
-static void xhci_zero_in_ctx(struct xhci_virt_device *virt_dev)
+static void xhci_zero_in_ctx(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev)
{
+ struct xhci_input_control_ctx *ctrl_ctx;
struct xhci_ep_ctx *ep_ctx;
+ struct xhci_slot_ctx *slot_ctx;
int i;
/* When a device's add flag and drop flag are zero, any subsequent
* untouched. Make sure we don't leave any old state in the input
* endpoint contexts.
*/
- virt_dev->in_ctx->drop_flags = 0;
- virt_dev->in_ctx->add_flags = 0;
- virt_dev->in_ctx->slot.dev_info &= ~LAST_CTX_MASK;
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
+ ctrl_ctx->drop_flags = 0;
+ ctrl_ctx->add_flags = 0;
+ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
+ slot_ctx->dev_info &= ~LAST_CTX_MASK;
/* Endpoint 0 is always valid */
- virt_dev->in_ctx->slot.dev_info |= LAST_CTX(1);
+ slot_ctx->dev_info |= LAST_CTX(1);
for (i = 1; i < 31; ++i) {
- ep_ctx = &virt_dev->in_ctx->ep[i];
+ ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, i);
ep_ctx->ep_info = 0;
ep_ctx->ep_info2 = 0;
- ep_ctx->deq[0] = 0;
- ep_ctx->deq[1] = 0;
+ ep_ctx->deq = 0;
ep_ctx->tx_info = 0;
}
}
unsigned long flags;
struct xhci_hcd *xhci;
struct xhci_virt_device *virt_dev;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ struct xhci_slot_ctx *slot_ctx;
ret = xhci_check_args(hcd, udev, NULL, 0, __func__);
if (ret <= 0)
virt_dev = xhci->devs[udev->slot_id];
/* See section 4.6.6 - A0 = 1; A1 = D0 = D1 = 0 */
- virt_dev->in_ctx->add_flags |= SLOT_FLAG;
- virt_dev->in_ctx->add_flags &= ~EP0_FLAG;
- virt_dev->in_ctx->drop_flags &= ~SLOT_FLAG;
- virt_dev->in_ctx->drop_flags &= ~EP0_FLAG;
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
+ ctrl_ctx->add_flags |= SLOT_FLAG;
+ ctrl_ctx->add_flags &= ~EP0_FLAG;
+ ctrl_ctx->drop_flags &= ~SLOT_FLAG;
+ ctrl_ctx->drop_flags &= ~EP0_FLAG;
xhci_dbg(xhci, "New Input Control Context:\n");
- xhci_dbg_ctx(xhci, virt_dev->in_ctx, virt_dev->in_ctx_dma,
- LAST_CTX_TO_EP_NUM(virt_dev->in_ctx->slot.dev_info));
+ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
+ xhci_dbg_ctx(xhci, virt_dev->in_ctx,
+ LAST_CTX_TO_EP_NUM(slot_ctx->dev_info));
spin_lock_irqsave(&xhci->lock, flags);
- ret = xhci_queue_configure_endpoint(xhci, virt_dev->in_ctx_dma,
+ ret = xhci_queue_configure_endpoint(xhci, virt_dev->in_ctx->dma,
udev->slot_id);
if (ret < 0) {
spin_unlock_irqrestore(&xhci->lock, flags);
}
xhci_dbg(xhci, "Output context after successful config ep cmd:\n");
- xhci_dbg_ctx(xhci, virt_dev->out_ctx, virt_dev->out_ctx_dma,
- LAST_CTX_TO_EP_NUM(virt_dev->in_ctx->slot.dev_info));
+ xhci_dbg_ctx(xhci, virt_dev->out_ctx,
+ LAST_CTX_TO_EP_NUM(slot_ctx->dev_info));
- xhci_zero_in_ctx(virt_dev);
+ xhci_zero_in_ctx(xhci, virt_dev);
/* Free any old rings */
for (i = 1; i < 31; ++i) {
if (virt_dev->new_ep_rings[i]) {
virt_dev->new_ep_rings[i] = NULL;
}
}
- xhci_zero_in_ctx(virt_dev);
+ xhci_zero_in_ctx(xhci, virt_dev);
+}
+
+/* Deal with stalled endpoints. The core should have sent the control message
+ * to clear the halt condition. However, we need to make the xHCI hardware
+ * reset its sequence number, since a device will expect a sequence number of
+ * zero after the halt condition is cleared.
+ * Context: in_interrupt
+ */
+void xhci_endpoint_reset(struct usb_hcd *hcd,
+ struct usb_host_endpoint *ep)
+{
+ struct xhci_hcd *xhci;
+ struct usb_device *udev;
+ unsigned int ep_index;
+ unsigned long flags;
+ int ret;
+ struct xhci_dequeue_state deq_state;
+ struct xhci_ring *ep_ring;
+
+ xhci = hcd_to_xhci(hcd);
+ udev = (struct usb_device *) ep->hcpriv;
+ /* Called with a root hub endpoint (or an endpoint that wasn't added
+ * with xhci_add_endpoint()
+ */
+ if (!ep->hcpriv)
+ return;
+ ep_index = xhci_get_endpoint_index(&ep->desc);
+ ep_ring = xhci->devs[udev->slot_id]->ep_rings[ep_index];
+ if (!ep_ring->stopped_td) {
+ xhci_dbg(xhci, "Endpoint 0x%x not halted, refusing to reset.\n",
+ ep->desc.bEndpointAddress);
+ return;
+ }
+
+ xhci_dbg(xhci, "Queueing reset endpoint command\n");
+ spin_lock_irqsave(&xhci->lock, flags);
+ ret = xhci_queue_reset_ep(xhci, udev->slot_id, ep_index);
+ /*
+ * Can't change the ring dequeue pointer until it's transitioned to the
+ * stopped state, which is only upon a successful reset endpoint
+ * command. Better hope that last command worked!
+ */
+ if (!ret) {
+ xhci_dbg(xhci, "Cleaning up stalled endpoint ring\n");
+ /* We need to move the HW's dequeue pointer past this TD,
+ * or it will attempt to resend it on the next doorbell ring.
+ */
+ xhci_find_new_dequeue_state(xhci, udev->slot_id,
+ ep_index, ep_ring->stopped_td, &deq_state);
+ xhci_dbg(xhci, "Queueing new dequeue state\n");
+ xhci_queue_new_dequeue_state(xhci, ep_ring,
+ udev->slot_id,
+ ep_index, &deq_state);
+ kfree(ep_ring->stopped_td);
+ xhci_ring_cmd_db(xhci);
+ }
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ if (ret)
+ xhci_warn(xhci, "FIXME allocate a new ring segment\n");
}
/*
struct xhci_virt_device *virt_dev;
int ret = 0;
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
- u32 temp;
+ struct xhci_slot_ctx *slot_ctx;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ u64 temp_64;
if (!udev->slot_id) {
xhci_dbg(xhci, "Bad Slot ID %d\n", udev->slot_id);
if (!udev->config)
xhci_setup_addressable_virt_dev(xhci, udev);
/* Otherwise, assume the core has the device configured how it wants */
+ xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id);
+ xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2);
spin_lock_irqsave(&xhci->lock, flags);
- ret = xhci_queue_address_device(xhci, virt_dev->in_ctx_dma,
- udev->slot_id);
+ ret = xhci_queue_address_device(xhci, virt_dev->in_ctx->dma,
+ udev->slot_id);
if (ret) {
spin_unlock_irqrestore(&xhci->lock, flags);
xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
default:
xhci_err(xhci, "ERROR: unexpected command completion "
"code 0x%x.\n", virt_dev->cmd_status);
+ xhci_dbg(xhci, "Slot ID %d Output Context:\n", udev->slot_id);
+ xhci_dbg_ctx(xhci, virt_dev->out_ctx, 2);
ret = -EINVAL;
break;
}
if (ret) {
return ret;
}
- temp = xhci_readl(xhci, &xhci->op_regs->dcbaa_ptr[0]);
- xhci_dbg(xhci, "Op regs DCBAA ptr[0] = %#08x\n", temp);
- temp = xhci_readl(xhci, &xhci->op_regs->dcbaa_ptr[1]);
- xhci_dbg(xhci, "Op regs DCBAA ptr[1] = %#08x\n", temp);
- xhci_dbg(xhci, "Slot ID %d dcbaa entry[0] @%p = %#08x\n",
- udev->slot_id,
- &xhci->dcbaa->dev_context_ptrs[2*udev->slot_id],
- xhci->dcbaa->dev_context_ptrs[2*udev->slot_id]);
- xhci_dbg(xhci, "Slot ID %d dcbaa entry[1] @%p = %#08x\n",
+ temp_64 = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
+ xhci_dbg(xhci, "Op regs DCBAA ptr = %#016llx\n", temp_64);
+ xhci_dbg(xhci, "Slot ID %d dcbaa entry @%p = %#016llx\n",
udev->slot_id,
- &xhci->dcbaa->dev_context_ptrs[2*udev->slot_id+1],
- xhci->dcbaa->dev_context_ptrs[2*udev->slot_id+1]);
+ &xhci->dcbaa->dev_context_ptrs[udev->slot_id],
+ (unsigned long long)
+ xhci->dcbaa->dev_context_ptrs[udev->slot_id]);
xhci_dbg(xhci, "Output Context DMA address = %#08llx\n",
- (unsigned long long)virt_dev->out_ctx_dma);
+ (unsigned long long)virt_dev->out_ctx->dma);
xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id);
- xhci_dbg_ctx(xhci, virt_dev->in_ctx, virt_dev->in_ctx_dma, 2);
+ xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2);
xhci_dbg(xhci, "Slot ID %d Output Context:\n", udev->slot_id);
- xhci_dbg_ctx(xhci, virt_dev->out_ctx, virt_dev->out_ctx_dma, 2);
+ xhci_dbg_ctx(xhci, virt_dev->out_ctx, 2);
/*
* USB core uses address 1 for the roothubs, so we add one to the
* address given back to us by the HC.
*/
- udev->devnum = (virt_dev->out_ctx->slot.dev_state & DEV_ADDR_MASK) + 1;
+ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
+ udev->devnum = (slot_ctx->dev_state & DEV_ADDR_MASK) + 1;
/* Zero the input context control for later use */
- virt_dev->in_ctx->add_flags = 0;
- virt_dev->in_ctx->drop_flags = 0;
- /* Mirror flags in the output context for future ep enable/disable */
- virt_dev->out_ctx->add_flags = SLOT_FLAG | EP0_FLAG;
- virt_dev->out_ctx->drop_flags = 0;
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
+ ctrl_ctx->add_flags = 0;
+ ctrl_ctx->drop_flags = 0;
xhci_dbg(xhci, "Device address = %d\n", udev->devnum);
/* XXX Meh, not sure if anyone else but choose_address uses this. */
/* xhci_device_control has eight fields, and also
* embeds one xhci_slot_ctx and 31 xhci_ep_ctx
*/
- BUILD_BUG_ON(sizeof(struct xhci_device_control) != (8+8+8*31)*32/8);
BUILD_BUG_ON(sizeof(struct xhci_stream_ctx) != 4*32/8);
BUILD_BUG_ON(sizeof(union xhci_trb) != 4*32/8);
BUILD_BUG_ON(sizeof(struct xhci_erst_entry) != 4*32/8);
return;
prev->next = next;
if (link_trbs) {
- prev->trbs[TRBS_PER_SEGMENT-1].link.segment_ptr[0] = next->dma;
+ prev->trbs[TRBS_PER_SEGMENT-1].link.segment_ptr = next->dma;
/* Set the last TRB in the segment to have a TRB type ID of Link TRB */
val = prev->trbs[TRBS_PER_SEGMENT-1].link.control;
return 0;
}
+#define CTX_SIZE(_hcc) (HCC_64BYTE_CONTEXT(_hcc) ? 64 : 32)
+
+struct xhci_container_ctx *xhci_alloc_container_ctx(struct xhci_hcd *xhci,
+ int type, gfp_t flags)
+{
+ struct xhci_container_ctx *ctx = kzalloc(sizeof(*ctx), flags);
+ if (!ctx)
+ return NULL;
+
+ BUG_ON((type != XHCI_CTX_TYPE_DEVICE) && (type != XHCI_CTX_TYPE_INPUT));
+ ctx->type = type;
+ ctx->size = HCC_64BYTE_CONTEXT(xhci->hcc_params) ? 2048 : 1024;
+ if (type == XHCI_CTX_TYPE_INPUT)
+ ctx->size += CTX_SIZE(xhci->hcc_params);
+
+ ctx->bytes = dma_pool_alloc(xhci->device_pool, flags, &ctx->dma);
+ memset(ctx->bytes, 0, ctx->size);
+ return ctx;
+}
+
+void xhci_free_container_ctx(struct xhci_hcd *xhci,
+ struct xhci_container_ctx *ctx)
+{
+ dma_pool_free(xhci->device_pool, ctx->bytes, ctx->dma);
+ kfree(ctx);
+}
+
+struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci,
+ struct xhci_container_ctx *ctx)
+{
+ BUG_ON(ctx->type != XHCI_CTX_TYPE_INPUT);
+ return (struct xhci_input_control_ctx *)ctx->bytes;
+}
+
+struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci,
+ struct xhci_container_ctx *ctx)
+{
+ if (ctx->type == XHCI_CTX_TYPE_DEVICE)
+ return (struct xhci_slot_ctx *)ctx->bytes;
+
+ return (struct xhci_slot_ctx *)
+ (ctx->bytes + CTX_SIZE(xhci->hcc_params));
+}
+
+struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci,
+ struct xhci_container_ctx *ctx,
+ unsigned int ep_index)
+{
+ /* increment ep index by offset of start of ep ctx array */
+ ep_index++;
+ if (ctx->type == XHCI_CTX_TYPE_INPUT)
+ ep_index++;
+
+ return (struct xhci_ep_ctx *)
+ (ctx->bytes + (ep_index * CTX_SIZE(xhci->hcc_params)));
+}
+
/* All the xhci_tds in the ring's TD list should be freed at this point */
void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
{
return;
dev = xhci->devs[slot_id];
- xhci->dcbaa->dev_context_ptrs[2*slot_id] = 0;
- xhci->dcbaa->dev_context_ptrs[2*slot_id + 1] = 0;
+ xhci->dcbaa->dev_context_ptrs[slot_id] = 0;
if (!dev)
return;
xhci_ring_free(xhci, dev->ep_rings[i]);
if (dev->in_ctx)
- dma_pool_free(xhci->device_pool,
- dev->in_ctx, dev->in_ctx_dma);
+ xhci_free_container_ctx(xhci, dev->in_ctx);
if (dev->out_ctx)
- dma_pool_free(xhci->device_pool,
- dev->out_ctx, dev->out_ctx_dma);
+ xhci_free_container_ctx(xhci, dev->out_ctx);
+
kfree(xhci->devs[slot_id]);
xhci->devs[slot_id] = 0;
}
int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id,
struct usb_device *udev, gfp_t flags)
{
- dma_addr_t dma;
struct xhci_virt_device *dev;
/* Slot ID 0 is reserved */
return 0;
dev = xhci->devs[slot_id];
- /* Allocate the (output) device context that will be used in the HC */
- dev->out_ctx = dma_pool_alloc(xhci->device_pool, flags, &dma);
+ /* Allocate the (output) device context that will be used in the HC. */
+ dev->out_ctx = xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_DEVICE, flags);
if (!dev->out_ctx)
goto fail;
- dev->out_ctx_dma = dma;
+
xhci_dbg(xhci, "Slot %d output ctx = 0x%llx (dma)\n", slot_id,
- (unsigned long long)dma);
- memset(dev->out_ctx, 0, sizeof(*dev->out_ctx));
+ (unsigned long long)dev->out_ctx->dma);
/* Allocate the (input) device context for address device command */
- dev->in_ctx = dma_pool_alloc(xhci->device_pool, flags, &dma);
+ dev->in_ctx = xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_INPUT, flags);
if (!dev->in_ctx)
goto fail;
- dev->in_ctx_dma = dma;
+
xhci_dbg(xhci, "Slot %d input ctx = 0x%llx (dma)\n", slot_id,
- (unsigned long long)dma);
- memset(dev->in_ctx, 0, sizeof(*dev->in_ctx));
+ (unsigned long long)dev->in_ctx->dma);
/* Allocate endpoint 0 ring */
dev->ep_rings[0] = xhci_ring_alloc(xhci, 1, true, flags);
init_completion(&dev->cmd_completion);
- /*
- * Point to output device context in dcbaa; skip the output control
- * context, which is eight 32 bit fields (or 32 bytes long)
- */
- xhci->dcbaa->dev_context_ptrs[2*slot_id] =
- (u32) dev->out_ctx_dma + (32);
+ /* Point to output device context in dcbaa. */
+ xhci->dcbaa->dev_context_ptrs[slot_id] = dev->out_ctx->dma;
xhci_dbg(xhci, "Set slot id %d dcbaa entry %p to 0x%llx\n",
slot_id,
- &xhci->dcbaa->dev_context_ptrs[2*slot_id],
- (unsigned long long)dev->out_ctx_dma);
- xhci->dcbaa->dev_context_ptrs[2*slot_id + 1] = 0;
+ &xhci->dcbaa->dev_context_ptrs[slot_id],
+ (unsigned long long) xhci->dcbaa->dev_context_ptrs[slot_id]);
return 1;
fail:
struct xhci_virt_device *dev;
struct xhci_ep_ctx *ep0_ctx;
struct usb_device *top_dev;
+ struct xhci_slot_ctx *slot_ctx;
+ struct xhci_input_control_ctx *ctrl_ctx;
dev = xhci->devs[udev->slot_id];
/* Slot ID 0 is reserved */
udev->slot_id);
return -EINVAL;
}
- ep0_ctx = &dev->in_ctx->ep[0];
+ ep0_ctx = xhci_get_ep_ctx(xhci, dev->in_ctx, 0);
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, dev->in_ctx);
+ slot_ctx = xhci_get_slot_ctx(xhci, dev->in_ctx);
/* 2) New slot context and endpoint 0 context are valid*/
- dev->in_ctx->add_flags = SLOT_FLAG | EP0_FLAG;
+ ctrl_ctx->add_flags = SLOT_FLAG | EP0_FLAG;
/* 3) Only the control endpoint is valid - one endpoint context */
- dev->in_ctx->slot.dev_info |= LAST_CTX(1);
+ slot_ctx->dev_info |= LAST_CTX(1);
switch (udev->speed) {
case USB_SPEED_SUPER:
- dev->in_ctx->slot.dev_info |= (u32) udev->route;
- dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_SS;
+ slot_ctx->dev_info |= (u32) udev->route;
+ slot_ctx->dev_info |= (u32) SLOT_SPEED_SS;
break;
case USB_SPEED_HIGH:
- dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_HS;
+ slot_ctx->dev_info |= (u32) SLOT_SPEED_HS;
break;
case USB_SPEED_FULL:
- dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_FS;
+ slot_ctx->dev_info |= (u32) SLOT_SPEED_FS;
break;
case USB_SPEED_LOW:
- dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_LS;
+ slot_ctx->dev_info |= (u32) SLOT_SPEED_LS;
break;
case USB_SPEED_VARIABLE:
xhci_dbg(xhci, "FIXME xHCI doesn't support wireless speeds\n");
for (top_dev = udev; top_dev->parent && top_dev->parent->parent;
top_dev = top_dev->parent)
/* Found device below root hub */;
- dev->in_ctx->slot.dev_info2 |= (u32) ROOT_HUB_PORT(top_dev->portnum);
+ slot_ctx->dev_info2 |= (u32) ROOT_HUB_PORT(top_dev->portnum);
xhci_dbg(xhci, "Set root hub portnum to %d\n", top_dev->portnum);
/* Is this a LS/FS device under a HS hub? */
*/
if ((udev->speed == USB_SPEED_LOW || udev->speed == USB_SPEED_FULL) &&
udev->tt) {
- dev->in_ctx->slot.tt_info = udev->tt->hub->slot_id;
- dev->in_ctx->slot.tt_info |= udev->ttport << 8;
+ slot_ctx->tt_info = udev->tt->hub->slot_id;
+ slot_ctx->tt_info |= udev->ttport << 8;
}
xhci_dbg(xhci, "udev->tt = %p\n", udev->tt);
xhci_dbg(xhci, "udev->ttport = 0x%x\n", udev->ttport);
ep0_ctx->ep_info2 |= MAX_BURST(0);
ep0_ctx->ep_info2 |= ERROR_COUNT(3);
- ep0_ctx->deq[0] =
+ ep0_ctx->deq =
dev->ep_rings[0]->first_seg->dma;
- ep0_ctx->deq[0] |= dev->ep_rings[0]->cycle_state;
- ep0_ctx->deq[1] = 0;
+ ep0_ctx->deq |= dev->ep_rings[0]->cycle_state;
/* Steps 7 and 8 were done in xhci_alloc_virt_device() */
unsigned int max_burst;
ep_index = xhci_get_endpoint_index(&ep->desc);
- ep_ctx = &virt_dev->in_ctx->ep[ep_index];
+ ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
/* Set up the endpoint ring */
virt_dev->new_ep_rings[ep_index] = xhci_ring_alloc(xhci, 1, true, mem_flags);
if (!virt_dev->new_ep_rings[ep_index])
return -ENOMEM;
ep_ring = virt_dev->new_ep_rings[ep_index];
- ep_ctx->deq[0] = ep_ring->first_seg->dma | ep_ring->cycle_state;
- ep_ctx->deq[1] = 0;
+ ep_ctx->deq = ep_ring->first_seg->dma | ep_ring->cycle_state;
ep_ctx->ep_info = xhci_get_endpoint_interval(udev, ep);
/* FIXME dig Mult and streams info out of ep companion desc */
- /* Allow 3 retries for everything but isoc */
+ /* Allow 3 retries for everything but isoc;
+ * error count = 0 means infinite retries.
+ */
if (!usb_endpoint_xfer_isoc(&ep->desc))
ep_ctx->ep_info2 = ERROR_COUNT(3);
else
- ep_ctx->ep_info2 = ERROR_COUNT(0);
+ ep_ctx->ep_info2 = ERROR_COUNT(1);
ep_ctx->ep_info2 |= xhci_get_endpoint_type(udev, ep);
max_packet = ep->desc.wMaxPacketSize;
ep_ctx->ep_info2 |= MAX_PACKET(max_packet);
/* dig out max burst from ep companion desc */
- max_packet = ep->ss_ep_comp->desc.bMaxBurst;
+ if (!ep->ss_ep_comp) {
+ xhci_warn(xhci, "WARN no SS endpoint companion descriptor.\n");
+ max_packet = 0;
+ } else {
+ max_packet = ep->ss_ep_comp->desc.bMaxBurst;
+ }
ep_ctx->ep_info2 |= MAX_BURST(max_packet);
break;
case USB_SPEED_HIGH:
struct xhci_ep_ctx *ep_ctx;
ep_index = xhci_get_endpoint_index(&ep->desc);
- ep_ctx = &virt_dev->in_ctx->ep[ep_index];
+ ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
ep_ctx->ep_info = 0;
ep_ctx->ep_info2 = 0;
- ep_ctx->deq[0] = 0;
- ep_ctx->deq[1] = 0;
+ ep_ctx->deq = 0;
ep_ctx->tx_info = 0;
/* Don't free the endpoint ring until the set interface or configuration
* request succeeds.
*/
}
+/* Set up the scratchpad buffer array and scratchpad buffers, if needed. */
+static int scratchpad_alloc(struct xhci_hcd *xhci, gfp_t flags)
+{
+ int i;
+ struct device *dev = xhci_to_hcd(xhci)->self.controller;
+ int num_sp = HCS_MAX_SCRATCHPAD(xhci->hcs_params2);
+
+ xhci_dbg(xhci, "Allocating %d scratchpad buffers\n", num_sp);
+
+ if (!num_sp)
+ return 0;
+
+ xhci->scratchpad = kzalloc(sizeof(*xhci->scratchpad), flags);
+ if (!xhci->scratchpad)
+ goto fail_sp;
+
+ xhci->scratchpad->sp_array =
+ pci_alloc_consistent(to_pci_dev(dev),
+ num_sp * sizeof(u64),
+ &xhci->scratchpad->sp_dma);
+ if (!xhci->scratchpad->sp_array)
+ goto fail_sp2;
+
+ xhci->scratchpad->sp_buffers = kzalloc(sizeof(void *) * num_sp, flags);
+ if (!xhci->scratchpad->sp_buffers)
+ goto fail_sp3;
+
+ xhci->scratchpad->sp_dma_buffers =
+ kzalloc(sizeof(dma_addr_t) * num_sp, flags);
+
+ if (!xhci->scratchpad->sp_dma_buffers)
+ goto fail_sp4;
+
+ xhci->dcbaa->dev_context_ptrs[0] = xhci->scratchpad->sp_dma;
+ for (i = 0; i < num_sp; i++) {
+ dma_addr_t dma;
+ void *buf = pci_alloc_consistent(to_pci_dev(dev),
+ xhci->page_size, &dma);
+ if (!buf)
+ goto fail_sp5;
+
+ xhci->scratchpad->sp_array[i] = dma;
+ xhci->scratchpad->sp_buffers[i] = buf;
+ xhci->scratchpad->sp_dma_buffers[i] = dma;
+ }
+
+ return 0;
+
+ fail_sp5:
+ for (i = i - 1; i >= 0; i--) {
+ pci_free_consistent(to_pci_dev(dev), xhci->page_size,
+ xhci->scratchpad->sp_buffers[i],
+ xhci->scratchpad->sp_dma_buffers[i]);
+ }
+ kfree(xhci->scratchpad->sp_dma_buffers);
+
+ fail_sp4:
+ kfree(xhci->scratchpad->sp_buffers);
+
+ fail_sp3:
+ pci_free_consistent(to_pci_dev(dev), num_sp * sizeof(u64),
+ xhci->scratchpad->sp_array,
+ xhci->scratchpad->sp_dma);
+
+ fail_sp2:
+ kfree(xhci->scratchpad);
+ xhci->scratchpad = NULL;
+
+ fail_sp:
+ return -ENOMEM;
+}
+
+static void scratchpad_free(struct xhci_hcd *xhci)
+{
+ int num_sp;
+ int i;
+ struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+
+ if (!xhci->scratchpad)
+ return;
+
+ num_sp = HCS_MAX_SCRATCHPAD(xhci->hcs_params2);
+
+ for (i = 0; i < num_sp; i++) {
+ pci_free_consistent(pdev, xhci->page_size,
+ xhci->scratchpad->sp_buffers[i],
+ xhci->scratchpad->sp_dma_buffers[i]);
+ }
+ kfree(xhci->scratchpad->sp_dma_buffers);
+ kfree(xhci->scratchpad->sp_buffers);
+ pci_free_consistent(pdev, num_sp * sizeof(u64),
+ xhci->scratchpad->sp_array,
+ xhci->scratchpad->sp_dma);
+ kfree(xhci->scratchpad);
+ xhci->scratchpad = NULL;
+}
+
void xhci_mem_cleanup(struct xhci_hcd *xhci)
{
struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
/* Free the Event Ring Segment Table and the actual Event Ring */
xhci_writel(xhci, 0, &xhci->ir_set->erst_size);
- xhci_writel(xhci, 0, &xhci->ir_set->erst_base[0]);
- xhci_writel(xhci, 0, &xhci->ir_set->erst_base[1]);
- xhci_writel(xhci, 0, &xhci->ir_set->erst_dequeue[0]);
- xhci_writel(xhci, 0, &xhci->ir_set->erst_dequeue[1]);
+ xhci_write_64(xhci, 0, &xhci->ir_set->erst_base);
+ xhci_write_64(xhci, 0, &xhci->ir_set->erst_dequeue);
size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
if (xhci->erst.entries)
pci_free_consistent(pdev, size,
xhci->event_ring = NULL;
xhci_dbg(xhci, "Freed event ring\n");
- xhci_writel(xhci, 0, &xhci->op_regs->cmd_ring[0]);
- xhci_writel(xhci, 0, &xhci->op_regs->cmd_ring[1]);
+ xhci_write_64(xhci, 0, &xhci->op_regs->cmd_ring);
if (xhci->cmd_ring)
xhci_ring_free(xhci, xhci->cmd_ring);
xhci->cmd_ring = NULL;
xhci->device_pool = NULL;
xhci_dbg(xhci, "Freed device context pool\n");
- xhci_writel(xhci, 0, &xhci->op_regs->dcbaa_ptr[0]);
- xhci_writel(xhci, 0, &xhci->op_regs->dcbaa_ptr[1]);
+ xhci_write_64(xhci, 0, &xhci->op_regs->dcbaa_ptr);
if (xhci->dcbaa)
pci_free_consistent(pdev, sizeof(*xhci->dcbaa),
xhci->dcbaa, xhci->dcbaa->dma);
xhci->page_size = 0;
xhci->page_shift = 0;
+ scratchpad_free(xhci);
}
int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
dma_addr_t dma;
struct device *dev = xhci_to_hcd(xhci)->self.controller;
unsigned int val, val2;
+ u64 val_64;
struct xhci_segment *seg;
u32 page_size;
int i;
xhci->dcbaa->dma = dma;
xhci_dbg(xhci, "// Device context base array address = 0x%llx (DMA), %p (virt)\n",
(unsigned long long)xhci->dcbaa->dma, xhci->dcbaa);
- xhci_writel(xhci, dma, &xhci->op_regs->dcbaa_ptr[0]);
- xhci_writel(xhci, (u32) 0, &xhci->op_regs->dcbaa_ptr[1]);
+ xhci_write_64(xhci, dma, &xhci->op_regs->dcbaa_ptr);
/*
* Initialize the ring segment pool. The ring must be a contiguous
*/
xhci->segment_pool = dma_pool_create("xHCI ring segments", dev,
SEGMENT_SIZE, 64, xhci->page_size);
+
/* See Table 46 and Note on Figure 55 */
- /* FIXME support 64-byte contexts */
xhci->device_pool = dma_pool_create("xHCI input/output contexts", dev,
- sizeof(struct xhci_device_control),
- 64, xhci->page_size);
+ 2112, 64, xhci->page_size);
if (!xhci->segment_pool || !xhci->device_pool)
goto fail;
(unsigned long long)xhci->cmd_ring->first_seg->dma);
/* Set the address in the Command Ring Control register */
- val = xhci_readl(xhci, &xhci->op_regs->cmd_ring[0]);
- val = (val & ~CMD_RING_ADDR_MASK) |
- (xhci->cmd_ring->first_seg->dma & CMD_RING_ADDR_MASK) |
+ val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
+ val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) |
+ (xhci->cmd_ring->first_seg->dma & (u64) ~CMD_RING_RSVD_BITS) |
xhci->cmd_ring->cycle_state;
- xhci_dbg(xhci, "// Setting command ring address low bits to 0x%x\n", val);
- xhci_writel(xhci, val, &xhci->op_regs->cmd_ring[0]);
- xhci_dbg(xhci, "// Setting command ring address high bits to 0x0\n");
- xhci_writel(xhci, (u32) 0, &xhci->op_regs->cmd_ring[1]);
+ xhci_dbg(xhci, "// Setting command ring address to 0x%x\n", val);
+ xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring);
xhci_dbg_cmd_ptrs(xhci);
val = xhci_readl(xhci, &xhci->cap_regs->db_off);
/* set ring base address and size for each segment table entry */
for (val = 0, seg = xhci->event_ring->first_seg; val < ERST_NUM_SEGS; val++) {
struct xhci_erst_entry *entry = &xhci->erst.entries[val];
- entry->seg_addr[0] = seg->dma;
- entry->seg_addr[1] = 0;
+ entry->seg_addr = seg->dma;
entry->seg_size = TRBS_PER_SEGMENT;
entry->rsvd = 0;
seg = seg->next;
/* set the segment table base address */
xhci_dbg(xhci, "// Set ERST base address for ir_set 0 = 0x%llx\n",
(unsigned long long)xhci->erst.erst_dma_addr);
- val = xhci_readl(xhci, &xhci->ir_set->erst_base[0]);
- val &= ERST_PTR_MASK;
- val |= (xhci->erst.erst_dma_addr & ~ERST_PTR_MASK);
- xhci_writel(xhci, val, &xhci->ir_set->erst_base[0]);
- xhci_writel(xhci, 0, &xhci->ir_set->erst_base[1]);
+ val_64 = xhci_read_64(xhci, &xhci->ir_set->erst_base);
+ val_64 &= ERST_PTR_MASK;
+ val_64 |= (xhci->erst.erst_dma_addr & (u64) ~ERST_PTR_MASK);
+ xhci_write_64(xhci, val_64, &xhci->ir_set->erst_base);
/* Set the event ring dequeue address */
xhci_set_hc_event_deq(xhci);
for (i = 0; i < MAX_HC_SLOTS; ++i)
xhci->devs[i] = 0;
+ if (scratchpad_alloc(xhci, flags))
+ goto fail;
+
return 0;
+
fail:
xhci_warn(xhci, "Couldn't initialize memory\n");
xhci_mem_cleanup(xhci);
.free_dev = xhci_free_dev,
.add_endpoint = xhci_add_endpoint,
.drop_endpoint = xhci_drop_endpoint,
+ .endpoint_reset = xhci_endpoint_reset,
.check_bandwidth = xhci_check_bandwidth,
.reset_bandwidth = xhci_reset_bandwidth,
.address_device = xhci_address_device,
static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer)
{
union xhci_trb *next = ++(ring->dequeue);
+ unsigned long long addr;
ring->deq_updates++;
/* Update the dequeue pointer further if that was a link TRB or we're at
ring->dequeue = ring->deq_seg->trbs;
next = ring->dequeue;
}
+ addr = (unsigned long long) xhci_trb_virt_to_dma(ring->deq_seg, ring->dequeue);
+ if (ring == xhci->event_ring)
+ xhci_dbg(xhci, "Event ring deq = 0x%llx (DMA)\n", addr);
+ else if (ring == xhci->cmd_ring)
+ xhci_dbg(xhci, "Command ring deq = 0x%llx (DMA)\n", addr);
+ else
+ xhci_dbg(xhci, "Ring deq = 0x%llx (DMA)\n", addr);
}
/*
{
u32 chain;
union xhci_trb *next;
+ unsigned long long addr;
chain = ring->enqueue->generic.field[3] & TRB_CHAIN;
next = ++(ring->enqueue);
ring->enqueue = ring->enq_seg->trbs;
next = ring->enqueue;
}
+ addr = (unsigned long long) xhci_trb_virt_to_dma(ring->enq_seg, ring->enqueue);
+ if (ring == xhci->event_ring)
+ xhci_dbg(xhci, "Event ring enq = 0x%llx (DMA)\n", addr);
+ else if (ring == xhci->cmd_ring)
+ xhci_dbg(xhci, "Command ring enq = 0x%llx (DMA)\n", addr);
+ else
+ xhci_dbg(xhci, "Ring enq = 0x%llx (DMA)\n", addr);
}
/*
void xhci_set_hc_event_deq(struct xhci_hcd *xhci)
{
- u32 temp;
+ u64 temp;
dma_addr_t deq;
deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg,
xhci_warn(xhci, "WARN something wrong with SW event ring "
"dequeue ptr.\n");
/* Update HC event ring dequeue pointer */
- temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]);
+ temp = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
temp &= ERST_PTR_MASK;
- if (!in_interrupt())
- xhci_dbg(xhci, "// Write event ring dequeue pointer\n");
- xhci_writel(xhci, 0, &xhci->ir_set->erst_dequeue[1]);
- xhci_writel(xhci, (deq & ~ERST_PTR_MASK) | temp,
- &xhci->ir_set->erst_dequeue[0]);
+ /* Don't clear the EHB bit (which is RW1C) because
+ * there might be more events to service.
+ */
+ temp &= ~ERST_EHB;
+ xhci_dbg(xhci, "// Write event ring dequeue pointer, preserving EHB bit\n");
+ xhci_write_64(xhci, ((u64) deq & (u64) ~ERST_PTR_MASK) | temp,
+ &xhci->ir_set->erst_dequeue);
}
/* Ring the host controller doorbell after placing a command on the ring */
/* Don't ring the doorbell for this endpoint if there are pending
* cancellations because the we don't want to interrupt processing.
*/
- if (!ep_ring->cancels_pending && !(ep_ring->state & SET_DEQ_PENDING)) {
+ if (!ep_ring->cancels_pending && !(ep_ring->state & SET_DEQ_PENDING)
+ && !(ep_ring->state & EP_HALTED)) {
field = xhci_readl(xhci, db_addr) & DB_MASK;
xhci_writel(xhci, field | EPI_TO_DB(ep_index), db_addr);
/* Flush PCI posted writes - FIXME Matthew Wilcox says this
return cur_seg;
}
-struct dequeue_state {
- struct xhci_segment *new_deq_seg;
- union xhci_trb *new_deq_ptr;
- int new_cycle_state;
-};
-
/*
* Move the xHC's endpoint ring dequeue pointer past cur_td.
* Record the new state of the xHC's endpoint ring dequeue segment,
* - Finally we move the dequeue state one TRB further, toggling the cycle bit
* if we've moved it past a link TRB with the toggle cycle bit set.
*/
-static void find_new_dequeue_state(struct xhci_hcd *xhci,
+void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
unsigned int slot_id, unsigned int ep_index,
- struct xhci_td *cur_td, struct dequeue_state *state)
+ struct xhci_td *cur_td, struct xhci_dequeue_state *state)
{
struct xhci_virt_device *dev = xhci->devs[slot_id];
struct xhci_ring *ep_ring = dev->ep_rings[ep_index];
struct xhci_generic_trb *trb;
+ struct xhci_ep_ctx *ep_ctx;
+ dma_addr_t addr;
state->new_cycle_state = 0;
+ xhci_dbg(xhci, "Finding segment containing stopped TRB.\n");
state->new_deq_seg = find_trb_seg(cur_td->start_seg,
ep_ring->stopped_trb,
&state->new_cycle_state);
if (!state->new_deq_seg)
BUG();
/* Dig out the cycle state saved by the xHC during the stop ep cmd */
- state->new_cycle_state = 0x1 & dev->out_ctx->ep[ep_index].deq[0];
+ xhci_dbg(xhci, "Finding endpoint context\n");
+ ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
+ state->new_cycle_state = 0x1 & ep_ctx->deq;
state->new_deq_ptr = cur_td->last_trb;
+ xhci_dbg(xhci, "Finding segment containing last TRB in TD.\n");
state->new_deq_seg = find_trb_seg(state->new_deq_seg,
state->new_deq_ptr,
&state->new_cycle_state);
next_trb(xhci, ep_ring, &state->new_deq_seg, &state->new_deq_ptr);
/* Don't update the ring cycle state for the producer (us). */
+ xhci_dbg(xhci, "New dequeue segment = %p (virtual)\n",
+ state->new_deq_seg);
+ addr = xhci_trb_virt_to_dma(state->new_deq_seg, state->new_deq_ptr);
+ xhci_dbg(xhci, "New dequeue pointer = 0x%llx (DMA)\n",
+ (unsigned long long) addr);
+ xhci_dbg(xhci, "Setting dequeue pointer in internal ring state.\n");
ep_ring->dequeue = state->new_deq_ptr;
ep_ring->deq_seg = state->new_deq_seg;
}
unsigned int ep_index, struct xhci_segment *deq_seg,
union xhci_trb *deq_ptr, u32 cycle_state);
+void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
+ struct xhci_ring *ep_ring, unsigned int slot_id,
+ unsigned int ep_index, struct xhci_dequeue_state *deq_state)
+{
+ xhci_dbg(xhci, "Set TR Deq Ptr cmd, new deq seg = %p (0x%llx dma), "
+ "new deq ptr = %p (0x%llx dma), new cycle = %u\n",
+ deq_state->new_deq_seg,
+ (unsigned long long)deq_state->new_deq_seg->dma,
+ deq_state->new_deq_ptr,
+ (unsigned long long)xhci_trb_virt_to_dma(deq_state->new_deq_seg, deq_state->new_deq_ptr),
+ deq_state->new_cycle_state);
+ queue_set_tr_deq(xhci, slot_id, ep_index,
+ deq_state->new_deq_seg,
+ deq_state->new_deq_ptr,
+ (u32) deq_state->new_cycle_state);
+ /* Stop the TD queueing code from ringing the doorbell until
+ * this command completes. The HC won't set the dequeue pointer
+ * if the ring is running, and ringing the doorbell starts the
+ * ring running.
+ */
+ ep_ring->state |= SET_DEQ_PENDING;
+ xhci_ring_cmd_db(xhci);
+}
+
/*
* When we get a command completion for a Stop Endpoint Command, we need to
* unlink any cancelled TDs from the ring. There are two ways to do that:
struct xhci_td *cur_td = 0;
struct xhci_td *last_unlinked_td;
- struct dequeue_state deq_state;
+ struct xhci_dequeue_state deq_state;
#ifdef CONFIG_USB_HCD_STAT
ktime_t stop_time = ktime_get();
#endif
* move the xHC endpoint ring dequeue pointer past this TD.
*/
if (cur_td == ep_ring->stopped_td)
- find_new_dequeue_state(xhci, slot_id, ep_index, cur_td,
+ xhci_find_new_dequeue_state(xhci, slot_id, ep_index, cur_td,
&deq_state);
else
td_to_noop(xhci, ep_ring, cur_td);
/* If necessary, queue a Set Transfer Ring Dequeue Pointer command */
if (deq_state.new_deq_ptr && deq_state.new_deq_seg) {
- xhci_dbg(xhci, "Set TR Deq Ptr cmd, new deq seg = %p (0x%llx dma), "
- "new deq ptr = %p (0x%llx dma), new cycle = %u\n",
- deq_state.new_deq_seg,
- (unsigned long long)deq_state.new_deq_seg->dma,
- deq_state.new_deq_ptr,
- (unsigned long long)xhci_trb_virt_to_dma(deq_state.new_deq_seg, deq_state.new_deq_ptr),
- deq_state.new_cycle_state);
- queue_set_tr_deq(xhci, slot_id, ep_index,
- deq_state.new_deq_seg,
- deq_state.new_deq_ptr,
- (u32) deq_state.new_cycle_state);
- /* Stop the TD queueing code from ringing the doorbell until
- * this command completes. The HC won't set the dequeue pointer
- * if the ring is running, and ringing the doorbell starts the
- * ring running.
- */
- ep_ring->state |= SET_DEQ_PENDING;
- xhci_ring_cmd_db(xhci);
+ xhci_queue_new_dequeue_state(xhci, ep_ring,
+ slot_id, ep_index, &deq_state);
} else {
/* Otherwise just ring the doorbell to restart the ring */
ring_ep_doorbell(xhci, slot_id, ep_index);
unsigned int ep_index;
struct xhci_ring *ep_ring;
struct xhci_virt_device *dev;
+ struct xhci_ep_ctx *ep_ctx;
+ struct xhci_slot_ctx *slot_ctx;
slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]);
ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]);
dev = xhci->devs[slot_id];
ep_ring = dev->ep_rings[ep_index];
+ ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
+ slot_ctx = xhci_get_slot_ctx(xhci, dev->out_ctx);
if (GET_COMP_CODE(event->status) != COMP_SUCCESS) {
unsigned int ep_state;
case COMP_CTX_STATE:
xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed due "
"to incorrect slot or ep state.\n");
- ep_state = dev->out_ctx->ep[ep_index].ep_info;
+ ep_state = ep_ctx->ep_info;
ep_state &= EP_STATE_MASK;
- slot_state = dev->out_ctx->slot.dev_state;
+ slot_state = slot_ctx->dev_state;
slot_state = GET_SLOT_STATE(slot_state);
xhci_dbg(xhci, "Slot state = %u, EP state = %u\n",
slot_state, ep_state);
* cancelling URBs, which might not be an error...
*/
} else {
- xhci_dbg(xhci, "Successful Set TR Deq Ptr cmd, deq[0] = 0x%x, "
- "deq[1] = 0x%x.\n",
- dev->out_ctx->ep[ep_index].deq[0],
- dev->out_ctx->ep[ep_index].deq[1]);
+ xhci_dbg(xhci, "Successful Set TR Deq Ptr cmd, deq = @%08llx\n",
+ ep_ctx->deq);
}
ep_ring->state &= ~SET_DEQ_PENDING;
ring_ep_doorbell(xhci, slot_id, ep_index);
}
+static void handle_reset_ep_completion(struct xhci_hcd *xhci,
+ struct xhci_event_cmd *event,
+ union xhci_trb *trb)
+{
+ int slot_id;
+ unsigned int ep_index;
+
+ slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]);
+ ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]);
+ /* This command will only fail if the endpoint wasn't halted,
+ * but we don't care.
+ */
+ xhci_dbg(xhci, "Ignoring reset ep completion code of %u\n",
+ (unsigned int) GET_COMP_CODE(event->status));
+
+ /* Clear our internal halted state and restart the ring */
+ xhci->devs[slot_id]->ep_rings[ep_index]->state &= ~EP_HALTED;
+ ring_ep_doorbell(xhci, slot_id, ep_index);
+}
static void handle_cmd_completion(struct xhci_hcd *xhci,
struct xhci_event_cmd *event)
u64 cmd_dma;
dma_addr_t cmd_dequeue_dma;
- cmd_dma = (((u64) event->cmd_trb[1]) << 32) + event->cmd_trb[0];
+ cmd_dma = event->cmd_trb;
cmd_dequeue_dma = xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
xhci->cmd_ring->dequeue);
/* Is the command ring deq ptr out of sync with the deq seg ptr? */
case TRB_TYPE(TRB_CMD_NOOP):
++xhci->noops_handled;
break;
+ case TRB_TYPE(TRB_RESET_EP):
+ handle_reset_ep_completion(xhci, event, xhci->cmd_ring->dequeue);
+ break;
default:
/* Skip over unknown commands on the event ring */
xhci->error_bitmask |= 1 << 6;
union xhci_trb *event_trb;
struct urb *urb = 0;
int status = -EINPROGRESS;
+ struct xhci_ep_ctx *ep_ctx;
+ xhci_dbg(xhci, "In %s\n", __func__);
xdev = xhci->devs[TRB_TO_SLOT_ID(event->flags)];
if (!xdev) {
xhci_err(xhci, "ERROR Transfer event pointed to bad slot\n");
/* Endpoint ID is 1 based, our index is zero based */
ep_index = TRB_TO_EP_ID(event->flags) - 1;
+ xhci_dbg(xhci, "%s - ep index = %d\n", __func__, ep_index);
ep_ring = xdev->ep_rings[ep_index];
- if (!ep_ring || (xdev->out_ctx->ep[ep_index].ep_info & EP_STATE_MASK) == EP_STATE_DISABLED) {
+ ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
+ if (!ep_ring || (ep_ctx->ep_info & EP_STATE_MASK) == EP_STATE_DISABLED) {
xhci_err(xhci, "ERROR Transfer event pointed to disabled endpoint\n");
return -ENODEV;
}
- event_dma = event->buffer[0];
- if (event->buffer[1] != 0)
- xhci_warn(xhci, "WARN ignoring upper 32-bits of 64-bit TRB dma address\n");
-
+ event_dma = event->buffer;
/* This TRB should be in the TD at the head of this ring's TD list */
+ xhci_dbg(xhci, "%s - checking for list empty\n", __func__);
if (list_empty(&ep_ring->td_list)) {
xhci_warn(xhci, "WARN Event TRB for slot %d ep %d with no TDs queued?\n",
TRB_TO_SLOT_ID(event->flags), ep_index);
urb = NULL;
goto cleanup;
}
+ xhci_dbg(xhci, "%s - getting list entry\n", __func__);
td = list_entry(ep_ring->td_list.next, struct xhci_td, td_list);
/* Is this a TRB in the currently executing TD? */
+ xhci_dbg(xhci, "%s - looking for TD\n", __func__);
event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue,
td->last_trb, event_dma);
+ xhci_dbg(xhci, "%s - found event_seg = %p\n", __func__, event_seg);
if (!event_seg) {
/* HC is busted, give up! */
xhci_err(xhci, "ERROR Transfer event TRB DMA ptr not part of current TD\n");
event_trb = &event_seg->trbs[(event_dma - event_seg->dma) / sizeof(*event_trb)];
xhci_dbg(xhci, "Event TRB with TRB type ID %u\n",
(unsigned int) (event->flags & TRB_TYPE_BITMASK)>>10);
- xhci_dbg(xhci, "Offset 0x00 (buffer[0]) = 0x%x\n",
- (unsigned int) event->buffer[0]);
- xhci_dbg(xhci, "Offset 0x04 (buffer[0]) = 0x%x\n",
- (unsigned int) event->buffer[1]);
+ xhci_dbg(xhci, "Offset 0x00 (buffer lo) = 0x%x\n",
+ lower_32_bits(event->buffer));
+ xhci_dbg(xhci, "Offset 0x04 (buffer hi) = 0x%x\n",
+ upper_32_bits(event->buffer));
xhci_dbg(xhci, "Offset 0x08 (transfer length) = 0x%x\n",
(unsigned int) event->transfer_len);
xhci_dbg(xhci, "Offset 0x0C (flags) = 0x%x\n",
break;
case COMP_STALL:
xhci_warn(xhci, "WARN: Stalled endpoint\n");
+ ep_ring->state |= EP_HALTED;
status = -EPIPE;
break;
case COMP_TRB_ERR:
xhci_warn(xhci, "WARN: transfer error on endpoint\n");
status = -EPROTO;
break;
+ case COMP_BABBLE:
+ xhci_warn(xhci, "WARN: babble error on endpoint\n");
+ status = -EOVERFLOW;
+ break;
case COMP_DB_ERR:
xhci_warn(xhci, "WARN: HC couldn't access mem fast enough\n");
status = -ENOSR;
if (event_trb != ep_ring->dequeue) {
/* The event was for the status stage */
if (event_trb == td->last_trb) {
- td->urb->actual_length =
- td->urb->transfer_buffer_length;
+ if (td->urb->actual_length != 0) {
+ /* Don't overwrite a previously set error code */
+ if (status == -EINPROGRESS || status == 0)
+ /* Did we already see a short data stage? */
+ status = -EREMOTEIO;
+ } else {
+ td->urb->actual_length =
+ td->urb->transfer_buffer_length;
+ }
} else {
/* Maybe the event was for the data stage? */
- if (GET_COMP_CODE(event->transfer_len) != COMP_STOP_INVAL)
+ if (GET_COMP_CODE(event->transfer_len) != COMP_STOP_INVAL) {
/* We didn't stop on a link TRB in the middle */
td->urb->actual_length =
td->urb->transfer_buffer_length -
TRB_LEN(event->transfer_len);
+ xhci_dbg(xhci, "Waiting for status stage event\n");
+ urb = NULL;
+ goto cleanup;
+ }
}
}
} else {
TRB_LEN(event->transfer_len));
td->urb->actual_length = 0;
}
- if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
- status = -EREMOTEIO;
- else
- status = 0;
+ /* Don't overwrite a previously set error code */
+ if (status == -EINPROGRESS) {
+ if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+ status = -EREMOTEIO;
+ else
+ status = 0;
+ }
} else {
td->urb->actual_length = td->urb->transfer_buffer_length;
/* Ignore a short packet completion if the
* untransferred length was zero.
*/
- status = 0;
+ if (status == -EREMOTEIO)
+ status = 0;
}
} else {
/* Slow path - walk the list, starting from the dequeue
TRB_LEN(event->transfer_len);
}
}
- /* The Endpoint Stop Command completion will take care of
- * any stopped TDs. A stopped TD may be restarted, so don't update the
- * ring dequeue pointer or take this TD off any lists yet.
- */
if (GET_COMP_CODE(event->transfer_len) == COMP_STOP_INVAL ||
GET_COMP_CODE(event->transfer_len) == COMP_STOP) {
+ /* The Endpoint Stop Command completion will take care of any
+ * stopped TDs. A stopped TD may be restarted, so don't update
+ * the ring dequeue pointer or take this TD off any lists yet.
+ */
ep_ring->stopped_td = td;
ep_ring->stopped_trb = event_trb;
} else {
- /* Update ring dequeue pointer */
- while (ep_ring->dequeue != td->last_trb)
+ if (GET_COMP_CODE(event->transfer_len) == COMP_STALL) {
+ /* The transfer is completed from the driver's
+ * perspective, but we need to issue a set dequeue
+ * command for this stalled endpoint to move the dequeue
+ * pointer past the TD. We can't do that here because
+ * the halt condition must be cleared first.
+ */
+ ep_ring->stopped_td = td;
+ ep_ring->stopped_trb = event_trb;
+ } else {
+ /* Update ring dequeue pointer */
+ while (ep_ring->dequeue != td->last_trb)
+ inc_deq(xhci, ep_ring, false);
inc_deq(xhci, ep_ring, false);
- inc_deq(xhci, ep_ring, false);
+ }
/* Clean up the endpoint's TD list */
urb = td->urb;
list_del(&td->cancelled_td_list);
ep_ring->cancels_pending--;
}
- kfree(td);
+ /* Leave the TD around for the reset endpoint function to use */
+ if (GET_COMP_CODE(event->transfer_len) != COMP_STALL) {
+ kfree(td);
+ }
urb->hcpriv = NULL;
}
cleanup:
/* FIXME for multi-TD URBs (who have buffers bigger than 64MB) */
if (urb) {
usb_hcd_unlink_urb_from_ep(xhci_to_hcd(xhci), urb);
+ xhci_dbg(xhci, "Giveback URB %p, len = %d, status = %d\n",
+ urb, td->urb->actual_length, status);
spin_unlock(&xhci->lock);
usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, status);
spin_lock(&xhci->lock);
int update_ptrs = 1;
int ret;
+ xhci_dbg(xhci, "In %s\n", __func__);
if (!xhci->event_ring || !xhci->event_ring->dequeue) {
xhci->error_bitmask |= 1 << 1;
return;
xhci->error_bitmask |= 1 << 2;
return;
}
+ xhci_dbg(xhci, "%s - OS owns TRB\n", __func__);
/* FIXME: Handle more event types. */
switch ((event->event_cmd.flags & TRB_TYPE_BITMASK)) {
case TRB_TYPE(TRB_COMPLETION):
+ xhci_dbg(xhci, "%s - calling handle_cmd_completion\n", __func__);
handle_cmd_completion(xhci, &event->event_cmd);
+ xhci_dbg(xhci, "%s - returned from handle_cmd_completion\n", __func__);
break;
case TRB_TYPE(TRB_PORT_STATUS):
+ xhci_dbg(xhci, "%s - calling handle_port_status\n", __func__);
handle_port_status(xhci, event);
+ xhci_dbg(xhci, "%s - returned from handle_port_status\n", __func__);
update_ptrs = 0;
break;
case TRB_TYPE(TRB_TRANSFER):
+ xhci_dbg(xhci, "%s - calling handle_tx_event\n", __func__);
ret = handle_tx_event(xhci, &event->trans_event);
+ xhci_dbg(xhci, "%s - returned from handle_tx_event\n", __func__);
if (ret < 0)
xhci->error_bitmask |= 1 << 9;
else
*/
xhci_warn(xhci, "WARN urb submitted to disabled ep\n");
return -ENOENT;
- case EP_STATE_HALTED:
case EP_STATE_ERROR:
- xhci_warn(xhci, "WARN waiting for halt or error on ep "
- "to be cleared\n");
+ xhci_warn(xhci, "WARN waiting for error on ep to be cleared\n");
/* FIXME event handling code for error needs to clear it */
/* XXX not sure if this should be -ENOENT or not */
return -EINVAL;
+ case EP_STATE_HALTED:
+ xhci_dbg(xhci, "WARN halted endpoint, queueing URB anyway.\n");
case EP_STATE_STOPPED:
case EP_STATE_RUNNING:
break;
gfp_t mem_flags)
{
int ret;
-
+ struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
ret = prepare_ring(xhci, xdev->ep_rings[ep_index],
- xdev->out_ctx->ep[ep_index].ep_info & EP_STATE_MASK,
+ ep_ctx->ep_info & EP_STATE_MASK,
num_trbs, mem_flags);
if (ret)
return ret;
/* Queue the first TRB, even if it's zero-length */
do {
u32 field = 0;
+ u32 length_field = 0;
/* Don't change the cycle bit of the first TRB until later */
if (first_trb)
(unsigned int) (addr + TRB_MAX_BUFF_SIZE) & ~(TRB_MAX_BUFF_SIZE - 1),
(unsigned int) addr + trb_buff_len);
}
+ length_field = TRB_LEN(trb_buff_len) |
+ TD_REMAINDER(urb->transfer_buffer_length - running_total) |
+ TRB_INTR_TARGET(0);
queue_trb(xhci, ep_ring, false,
- (u32) addr,
- (u32) ((u64) addr >> 32),
- TRB_LEN(trb_buff_len) | TRB_INTR_TARGET(0),
+ lower_32_bits(addr),
+ upper_32_bits(addr),
+ length_field,
/* We always want to know if the TRB was short,
* or we won't get an event when it completes.
* (Unless we use event data TRBs, which are a
struct xhci_generic_trb *start_trb;
bool first_trb;
int start_cycle;
- u32 field;
+ u32 field, length_field;
int running_total, trb_buff_len, ret;
u64 addr;
td->last_trb = ep_ring->enqueue;
field |= TRB_IOC;
}
+ length_field = TRB_LEN(trb_buff_len) |
+ TD_REMAINDER(urb->transfer_buffer_length - running_total) |
+ TRB_INTR_TARGET(0);
queue_trb(xhci, ep_ring, false,
- (u32) addr,
- (u32) ((u64) addr >> 32),
- TRB_LEN(trb_buff_len) | TRB_INTR_TARGET(0),
+ lower_32_bits(addr),
+ upper_32_bits(addr),
+ length_field,
/* We always want to know if the TRB was short,
* or we won't get an event when it completes.
* (Unless we use event data TRBs, which are a
struct usb_ctrlrequest *setup;
struct xhci_generic_trb *start_trb;
int start_cycle;
- u32 field;
+ u32 field, length_field;
struct xhci_td *td;
ep_ring = xhci->devs[slot_id]->ep_rings[ep_index];
/* If there's data, queue data TRBs */
field = 0;
+ length_field = TRB_LEN(urb->transfer_buffer_length) |
+ TD_REMAINDER(urb->transfer_buffer_length) |
+ TRB_INTR_TARGET(0);
if (urb->transfer_buffer_length > 0) {
if (setup->bRequestType & USB_DIR_IN)
field |= TRB_DIR_IN;
queue_trb(xhci, ep_ring, false,
lower_32_bits(urb->transfer_dma),
upper_32_bits(urb->transfer_dma),
- TRB_LEN(urb->transfer_buffer_length) | TRB_INTR_TARGET(0),
+ length_field,
/* Event on short tx */
field | TRB_ISP | TRB_TYPE(TRB_DATA) | ep_ring->cycle_state);
}
int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
u32 slot_id)
{
- return queue_command(xhci, in_ctx_ptr, 0, 0,
+ return queue_command(xhci, lower_32_bits(in_ctx_ptr),
+ upper_32_bits(in_ctx_ptr), 0,
TRB_TYPE(TRB_ADDR_DEV) | SLOT_ID_FOR_TRB(slot_id));
}
int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
u32 slot_id)
{
- return queue_command(xhci, in_ctx_ptr, 0, 0,
+ return queue_command(xhci, lower_32_bits(in_ctx_ptr),
+ upper_32_bits(in_ctx_ptr), 0,
TRB_TYPE(TRB_CONFIG_EP) | SLOT_ID_FOR_TRB(slot_id));
}
u32 type = TRB_TYPE(TRB_SET_DEQ);
addr = xhci_trb_virt_to_dma(deq_seg, deq_ptr);
- if (addr == 0)
+ if (addr == 0) {
xhci_warn(xhci, "WARN Cannot submit Set TR Deq Ptr\n");
xhci_warn(xhci, "WARN deq seg = %p, deq pt = %p\n",
deq_seg, deq_ptr);
- return queue_command(xhci, (u32) addr | cycle_state, 0, 0,
+ return 0;
+ }
+ return queue_command(xhci, lower_32_bits(addr) | cycle_state,
+ upper_32_bits(addr), 0,
trb_slot_id | trb_ep_index | type);
}
+
+int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id,
+ unsigned int ep_index)
+{
+ u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id);
+ u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
+ u32 type = TRB_TYPE(TRB_RESET_EP);
+
+ return queue_command(xhci, 0, 0, 0, trb_slot_id | trb_ep_index | type);
+}
#include <linux/usb.h>
#include <linux/timer.h>
+#include <linux/kernel.h>
#include "../core/hcd.h"
/* Code sharing between pci-quirks and xhci hcd */
* xHCI register interface.
* This corresponds to the eXtensible Host Controller Interface (xHCI)
* Revision 0.95 specification
- *
- * Registers should always be accessed with double word or quad word accesses.
- *
- * Some xHCI implementations may support 64-bit address pointers. Registers
- * with 64-bit address pointers should be written to with dword accesses by
- * writing the low dword first (ptr[0]), then the high dword (ptr[1]) second.
- * xHCI implementations that do not support 64-bit address pointers will ignore
- * the high dword, and write order is irrelevant.
*/
/**
#define HCS_ERST_MAX(p) (((p) >> 4) & 0xf)
/* bit 26 Scratchpad restore - for save/restore HW state - not used yet */
/* bits 27:31 number of Scratchpad buffers SW must allocate for the HW */
+#define HCS_MAX_SCRATCHPAD(p) (((p) >> 27) & 0x1f)
/* HCSPARAMS3 - hcs_params3 - bitmasks */
/* bits 0:7, Max U1 to U0 latency for the roothub ports */
u32 reserved1;
u32 reserved2;
u32 dev_notification;
- u32 cmd_ring[2];
+ u64 cmd_ring;
/* rsvd: offset 0x20-2F */
u32 reserved3[4];
- u32 dcbaa_ptr[2];
+ u64 dcbaa_ptr;
u32 config_reg;
/* rsvd: offset 0x3C-3FF */
u32 reserved4[241];
#define CMD_RING_RUNNING (1 << 3)
/* bits 4:5 reserved and should be preserved */
/* Command Ring pointer - bit mask for the lower 32 bits. */
-#define CMD_RING_ADDR_MASK (0xffffffc0)
+#define CMD_RING_RSVD_BITS (0x3f)
/* CONFIG - Configure Register - config_reg bitmasks */
/* bits 0:7 - maximum number of device slots enabled (NumSlotsEn) */
u32 irq_control;
u32 erst_size;
u32 rsvd;
- u32 erst_base[2];
- u32 erst_dequeue[2];
+ u64 erst_base;
+ u64 erst_dequeue;
};
/* irq_pending bitmasks */
#define EPI_TO_DB(p) (((p) + 1) & 0xff)
+/**
+ * struct xhci_container_ctx
+ * @type: Type of context. Used to calculated offsets to contained contexts.
+ * @size: Size of the context data
+ * @bytes: The raw context data given to HW
+ * @dma: dma address of the bytes
+ *
+ * Represents either a Device or Input context. Holds a pointer to the raw
+ * memory used for the context (bytes) and dma address of it (dma).
+ */
+struct xhci_container_ctx {
+ unsigned type;
+#define XHCI_CTX_TYPE_DEVICE 0x1
+#define XHCI_CTX_TYPE_INPUT 0x2
+
+ int size;
+
+ u8 *bytes;
+ dma_addr_t dma;
+};
+
/**
* struct xhci_slot_ctx
* @dev_info: Route string, device speed, hub info, and last valid endpoint
struct xhci_ep_ctx {
u32 ep_info;
u32 ep_info2;
- u32 deq[2];
+ u64 deq;
u32 tx_info;
/* offset 0x14 - 0x1f reserved for HC internal use */
u32 reserved[3];
/**
- * struct xhci_device_control
- * Input/Output context; see section 6.2.5.
+ * struct xhci_input_control_context
+ * Input control context; see section 6.2.5.
*
* @drop_context: set the bit of the endpoint context you want to disable
* @add_context: set the bit of the endpoint context you want to enable
*/
-struct xhci_device_control {
+struct xhci_input_control_ctx {
u32 drop_flags;
u32 add_flags;
- u32 rsvd[6];
- struct xhci_slot_ctx slot;
- struct xhci_ep_ctx ep[31];
+ u32 rsvd2[6];
};
/* drop context bitmasks */
/* add context bitmasks */
#define ADD_EP(x) (0x1 << x)
-
struct xhci_virt_device {
/*
* Commands to the hardware are passed an "input context" that
* track of input and output contexts separately because
* these commands might fail and we don't trust the hardware.
*/
- struct xhci_device_control *out_ctx;
- dma_addr_t out_ctx_dma;
+ struct xhci_container_ctx *out_ctx;
/* Used for addressing devices and configuration changes */
- struct xhci_device_control *in_ctx;
- dma_addr_t in_ctx_dma;
+ struct xhci_container_ctx *in_ctx;
+
/* FIXME when stream support is added */
struct xhci_ring *ep_rings[31];
/* Temporary storage in case the configure endpoint command fails and we
*/
struct xhci_device_context_array {
/* 64-bit device addresses; we only write 32-bit addresses */
- u32 dev_context_ptrs[2*MAX_HC_SLOTS];
+ u64 dev_context_ptrs[MAX_HC_SLOTS];
/* private xHCD pointers */
dma_addr_t dma;
};
struct xhci_stream_ctx {
/* 64-bit stream ring address, cycle state, and stream type */
- u32 stream_ring[2];
+ u64 stream_ring;
/* offset 0x14 - 0x1f reserved for HC internal use */
u32 reserved[2];
};
struct xhci_transfer_event {
/* 64-bit buffer address, or immediate data */
- u32 buffer[2];
+ u64 buffer;
u32 transfer_len;
/* This field is interpreted differently based on the type of TRB */
u32 flags;
struct xhci_link_trb {
/* 64-bit segment pointer*/
- u32 segment_ptr[2];
+ u64 segment_ptr;
u32 intr_target;
u32 control;
};
/* Command completion event TRB */
struct xhci_event_cmd {
/* Pointer to command TRB, or the value passed by the event data trb */
- u32 cmd_trb[2];
+ u64 cmd_trb;
u32 status;
u32 flags;
};
#define TRB_CONFIG_EP 12
/* Evaluate Context Command */
#define TRB_EVAL_CONTEXT 13
-/* Reset Transfer Ring Command */
-#define TRB_RESET_RING 14
+/* Reset Endpoint Command */
+#define TRB_RESET_EP 14
/* Stop Transfer Ring Command */
#define TRB_STOP_RING 15
/* Set Transfer Ring Dequeue Pointer Command */
unsigned int cancels_pending;
unsigned int state;
#define SET_DEQ_PENDING (1 << 0)
+#define EP_HALTED (1 << 1)
/* The TRB that was last reported in a stopped endpoint ring */
union xhci_trb *stopped_trb;
struct xhci_td *stopped_td;
u32 cycle_state;
};
+struct xhci_dequeue_state {
+ struct xhci_segment *new_deq_seg;
+ union xhci_trb *new_deq_ptr;
+ int new_cycle_state;
+};
+
struct xhci_erst_entry {
/* 64-bit event ring segment address */
- u32 seg_addr[2];
+ u64 seg_addr;
u32 seg_size;
/* Set to zero */
u32 rsvd;
unsigned int erst_size;
};
+struct xhci_scratchpad {
+ u64 *sp_array;
+ dma_addr_t sp_dma;
+ void **sp_buffers;
+ dma_addr_t *sp_dma_buffers;
+};
+
/*
* Each segment table entry is 4*32bits long. 1K seems like an ok size:
* (1K bytes * 8bytes/bit) / (4*32 bits) = 64 segment entries in the table,
struct xhci_ring *cmd_ring;
struct xhci_ring *event_ring;
struct xhci_erst erst;
+ /* Scratchpad */
+ struct xhci_scratchpad *scratchpad;
+
/* slot enabling and address device helpers */
struct completion addr_dev;
int slot_id;
static inline void xhci_writel(struct xhci_hcd *xhci,
const unsigned int val, __u32 __iomem *regs)
{
- if (!in_interrupt())
- xhci_dbg(xhci,
- "`MEM_WRITE_DWORD(3'b000, 32'h%p, 32'h%0x, 4'hf);\n",
- regs, val);
+ xhci_dbg(xhci,
+ "`MEM_WRITE_DWORD(3'b000, 32'h%p, 32'h%0x, 4'hf);\n",
+ regs, val);
writel(val, regs);
}
+/*
+ * Registers should always be accessed with double word or quad word accesses.
+ *
+ * Some xHCI implementations may support 64-bit address pointers. Registers
+ * with 64-bit address pointers should be written to with dword accesses by
+ * writing the low dword first (ptr[0]), then the high dword (ptr[1]) second.
+ * xHCI implementations that do not support 64-bit address pointers will ignore
+ * the high dword, and write order is irrelevant.
+ */
+static inline u64 xhci_read_64(const struct xhci_hcd *xhci,
+ __u64 __iomem *regs)
+{
+ __u32 __iomem *ptr = (__u32 __iomem *) regs;
+ u64 val_lo = readl(ptr);
+ u64 val_hi = readl(ptr + 1);
+ return val_lo + (val_hi << 32);
+}
+static inline void xhci_write_64(struct xhci_hcd *xhci,
+ const u64 val, __u64 __iomem *regs)
+{
+ __u32 __iomem *ptr = (__u32 __iomem *) regs;
+ u32 val_lo = lower_32_bits(val);
+ u32 val_hi = upper_32_bits(val);
+
+ xhci_dbg(xhci,
+ "`MEM_WRITE_DWORD(3'b000, 64'h%p, 64'h%0lx, 4'hf);\n",
+ regs, (long unsigned int) val);
+ writel(val_lo, ptr);
+ writel(val_hi, ptr + 1);
+}
+
/* xHCI debugging */
void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int set_num);
void xhci_print_registers(struct xhci_hcd *xhci);
void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst);
void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci);
void xhci_dbg_ring_ptrs(struct xhci_hcd *xhci, struct xhci_ring *ring);
-void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_device_control *ctx, dma_addr_t dma, unsigned int last_ep);
+void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int last_ep);
/* xHCI memory managment */
void xhci_mem_cleanup(struct xhci_hcd *xhci);
int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status);
int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep);
int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep);
+void xhci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep);
int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
int slot_id, unsigned int ep_index);
int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
u32 slot_id);
+int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id,
+ unsigned int ep_index);
+void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
+ unsigned int slot_id, unsigned int ep_index,
+ struct xhci_td *cur_td, struct xhci_dequeue_state *state);
+void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
+ struct xhci_ring *ep_ring, unsigned int slot_id,
+ unsigned int ep_index, struct xhci_dequeue_state *deq_state);
/* xHCI roothub code */
int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex,
char *buf, u16 wLength);
int xhci_hub_status_data(struct usb_hcd *hcd, char *buf);
+/* xHCI contexts */
+struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx);
+struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx);
+struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int ep_index);
+
#endif /* __LINUX_XHCI_HCD_H */
config USB_TEST
tristate "USB testing driver"
- depends on USB && USB_DEVICEFS
+ depends on USB
help
This driver is for testing host controller software. It is used
with specialized device firmware for regression and stress testing,
depends on !SUPERH
select NOP_USB_XCEIV if ARCH_DAVINCI
select TWL4030_USB if MACH_OMAP_3430SDP
+ select NOP_USB_XCEIV if MACH_OMAP3EVM
select USB_OTG_UTILS
tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
help
int i;
/* log core options (read using indexed model) */
- musb_ep_select(mbase, 0);
reg = musb_read_configdata(mbase);
strcpy(aInfo, (reg & MUSB_CONFIGDATA_UTMIDW) ? "UTMI-16" : "UTMI-8");
if (status < 0)
goto fail2;
-#ifdef CONFIG_USB_OTG
+#ifdef CONFIG_USB_MUSB_OTG
setup_timer(&musb->otg_timer, musb_otg_timer_func, (unsigned long) musb);
#endif
csr |= MUSB_RXCSR_P_SENDSTALL
| MUSB_RXCSR_FLUSHFIFO
| MUSB_RXCSR_CLRDATATOG
- | MUSB_TXCSR_P_WZC_BITS;
+ | MUSB_RXCSR_P_WZC_BITS;
musb_writew(regs, MUSB_RXCSR,
csr);
}
static inline u8 musb_read_configdata(void __iomem *mbase)
{
+ musb_writeb(mbase, MUSB_INDEX, 0);
return musb_readb(mbase, 0x10 + MUSB_CONFIGDATA);
}
{ USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
{ USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */
{ USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
+ { USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */
{ USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
{ USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */
{ USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
+ { USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */
{ USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
+ { USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */
{ USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
{ USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) },
+ { USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) },
+ { USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) },
+ { USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
#define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */
+/*
+ * GN Otometrics (http://www.otometrics.com)
+ * Submitted by Ville Sundberg.
+ */
+#define GN_OTOMETRICS_VID 0x0c33 /* Vendor ID */
+#define AURICAL_USB_PID 0x0010 /* Aurical USB Audiometer */
+
+/*
+ * Bayer Ascensia Contour blood glucose meter USB-converter cable.
+ * http://winglucofacts.com/cables/
+ */
+#define BAYER_VID 0x1A79
+#define BAYER_CONTOUR_CABLE_PID 0x6001
+
+/*
+ * Marvell OpenRD Base, Client
+ * http://www.open-rd.org
+ * OpenRD Base, Client use VID 0x0403
+ */
+#define MARVELL_OPENRD_PID 0x9e90
+
/*
* BmRequestType: 1100 0000b
* bRequest: FTDI_E2_READ
mos7720_port = usb_get_serial_port_data(port);
if (mos7720_port == NULL) {
dbg("%s:leaving ...........", __func__);
- return -ENODEV;
+ return 0;
}
for (i = 0; i < NUM_URBS; ++i) {
#define BANDB_DEVICE_ID_USOPTL4_4 0xAC44
#define BANDB_DEVICE_ID_USOPTL4_2 0xAC42
-/* This driver also supports the ATEN UC2324 device since it is mos7840 based
- * - if I knew the device id it would also support the ATEN UC2322 */
+/* This driver also supports
+ * ATEN UC2324 device using Moschip MCS7840
+ * ATEN UC2322 device using Moschip MCS7820
+ */
#define USB_VENDOR_ID_ATENINTL 0x0557
#define ATENINTL_DEVICE_ID_UC2324 0x2011
+#define ATENINTL_DEVICE_ID_UC2322 0x7820
/* Interrupt Routine Defines */
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
+ {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)},
{} /* terminating entry */
};
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
+ {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)},
{} /* terminating entry */
};
static int option_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear);
static int option_send_setup(struct usb_serial_port *port);
+#ifdef CONFIG_PM
static int option_suspend(struct usb_serial *serial, pm_message_t message);
static int option_resume(struct usb_serial *serial);
+#endif
/* Vendor and product IDs */
#define OPTION_VENDOR_ID 0x0AF0
#define NOVATELWIRELESS_PRODUCT_MC727 0x4100
#define NOVATELWIRELESS_PRODUCT_MC950D 0x4400
#define NOVATELWIRELESS_PRODUCT_U727 0x5010
+#define NOVATELWIRELESS_PRODUCT_MC727_NEW 0x5100
#define NOVATELWIRELESS_PRODUCT_MC760 0x6000
#define NOVATELWIRELESS_PRODUCT_OVMC760 0x6002
#define AXESSTEL_VENDOR_ID 0x1726
#define AXESSTEL_PRODUCT_MV110H 0x1000
-#define ONDA_VENDOR_ID 0x19d2
-#define ONDA_PRODUCT_MSA501HS 0x0001
-#define ONDA_PRODUCT_ET502HS 0x0002
-#define ONDA_PRODUCT_MT503HS 0x2000
-
#define BANDRICH_VENDOR_ID 0x1A8D
#define BANDRICH_PRODUCT_C100_1 0x1002
#define BANDRICH_PRODUCT_C100_2 0x1003
#define ZTE_PRODUCT_MF628 0x0015
#define ZTE_PRODUCT_MF626 0x0031
#define ZTE_PRODUCT_CDMA_TECH 0xfffe
+#define ZTE_PRODUCT_AC8710 0xfff1
#define BENQ_VENDOR_ID 0x04a5
#define BENQ_PRODUCT_H10 0x4068
#define ALINK_VENDOR_ID 0x1e0e
#define ALINK_PRODUCT_3GU 0x9200
+/* ALCATEL PRODUCTS */
+#define ALCATEL_VENDOR_ID 0x1bbb
+#define ALCATEL_PRODUCT_X060S 0x0000
+
+
static struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU870D) }, /* Novatel EU850D/EU860D/EU870D */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC950D) }, /* Novatel MC930D/MC950D */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC727) }, /* Novatel MC727/U727/USB727 */
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC727_NEW) }, /* Novatel MC727/U727/USB727 refresh */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U727) }, /* Novatel MC727/U727/USB727 */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC760) }, /* Novatel MC760/U760/USB760 */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_OVMC760) }, /* Novatel Ovation MC760 */
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) },
{ USB_DEVICE(AXESSTEL_VENDOR_ID, AXESSTEL_PRODUCT_MV110H) },
- { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MSA501HS) },
- { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_ET502HS) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0003) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0004) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0005) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0006) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0007) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0008) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0009) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x000a) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x000b) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x000c) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x000d) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x000e) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x000f) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0010) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0011) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0012) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0013) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0014) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0015) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0016) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0017) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0018) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0019) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0020) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0021) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0022) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0023) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0024) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0025) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0026) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0027) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0028) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0029) },
- { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MT503HS) },
{ USB_DEVICE(YISO_VENDOR_ID, YISO_PRODUCT_U893) },
{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) },
{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) },
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
{ USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
- { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622) },
- { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626) },
- { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) },
- { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0003, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0004, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0005, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0006, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0007, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0008, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0009, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000a, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000b, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000c, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000d, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000e, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000f, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0010, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0011, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0012, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0013, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0016, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0017, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0018, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0019, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0020, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0021, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0022, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0023, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0024, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0025, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0026, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0028, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0029, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0030, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0032, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0033, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0037, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0039, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0042, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0043, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0048, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0049, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0051, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0052, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0054, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0055, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0057, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0058, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0061, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0062, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0063, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0064, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0066, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0069, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0076, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0078, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0082, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0086, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) }, /* ZTE CDMA products */
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0027, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0059, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0060, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) },
{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4512) },
{ USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_HSDPA_MINICARD ) }, /* Toshiba 3G HSDPA == Novatel Expedite EU870D MiniCard */
{ USB_DEVICE(ALINK_VENDOR_ID, 0x9000) },
{ USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) },
+ { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
.name = "option",
.probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
+#ifdef CONFIG_PM
.suspend = usb_serial_suspend,
.resume = usb_serial_resume,
+#endif
.id_table = option_ids,
.no_dynamic_id = 1,
};
.disconnect = option_disconnect,
.release = option_release,
.read_int_callback = option_instat_callback,
+#ifdef CONFIG_PM
.suspend = option_suspend,
.resume = option_resume,
+#endif
};
static int debug;
int status = urb->status;
struct usb_serial_port *port = urb->context;
struct option_port_private *portdata = usb_get_serial_port_data(port);
- struct usb_serial *serial = port->serial;
dbg("%s", __func__);
dbg("%s: urb %p port %p has data %p", __func__, urb, port, portdata);
struct usb_serial_port *port, struct file *filp)
{
struct option_port_private *portdata;
- struct usb_serial *serial = port->serial;
int i, err;
struct urb *urb;
}
}
+#ifdef CONFIG_PM
static int option_suspend(struct usb_serial *serial, pm_message_t message)
{
dbg("%s entered", __func__);
}
return 0;
}
+#endif
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
{ USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
{ USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) },
+ { USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
{ } /* Terminating entry */
};
/* Cressi Edy (diving computer) PC interface */
#define CRESSI_VENDOR_ID 0x04b8
#define CRESSI_EDY_PRODUCT_ID 0x0521
+
+/* Sony, USB data cable for CMD-Jxx mobile phones */
+#define SONY_VENDOR_ID 0x054c
+#define SONY_QN3USB_PRODUCT_ID 0x0437
dbg("%s - port %d", __func__, port->number);
if (tport == NULL)
- return -ENODEV;
+ return 0;
spin_lock_irqsave(&tport->tp_lock, flags);
room = ti_buf_space_avail(tport->tp_write_buf);
dbg("%s - port %d", __func__, port->number);
if (tport == NULL)
- return -ENODEV;
+ return 0;
spin_lock_irqsave(&tport->tp_lock, flags);
chars = ti_buf_data_avail(tport->tp_write_buf);
#include <linux/mutex.h>
#include <linux/list.h>
#include <linux/uaccess.h>
+#include <linux/serial.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
#include "pl2303.h"
struct usb_serial_port *port;
unsigned int portNumber;
int retval = 0;
+ int first = 0;
dbg("%s", __func__);
/* If the console is attached, the device is already open */
if (port->port.count == 1 && !port->console) {
-
+ first = 1;
/* lock this module before we call it
* this may fail, which means we must bail out,
* safe because we are called with BKL held */
if (retval)
goto bailout_interface_put;
mutex_unlock(&serial->disc_mutex);
+ set_bit(ASYNCB_INITIALIZED, &port->port.flags);
}
mutex_unlock(&port->mutex);
/* Now do the correct tty layer semantics */
retval = tty_port_block_til_ready(&port->port, tty, filp);
- if (retval == 0)
+ if (retval == 0) {
+ if (!first)
+ usb_serial_put(serial);
return 0;
-
+ }
+ mutex_lock(&port->mutex);
+ if (first == 0)
+ goto bailout_mutex_unlock;
+ /* Undo the initial port actions */
+ mutex_lock(&serial->disc_mutex);
bailout_interface_put:
usb_autopm_put_interface(serial->interface);
bailout_module_put:
dbg("%s - port %d", __func__, port->number);
+ /* FIXME:
+ This leaves a very narrow race. Really we should do the
+ serial_do_free() on tty->shutdown(), but tty->shutdown can
+ be called from IRQ context and serial_do_free can sleep.
+
+ The right fix is probably to make the tty free (which is rare)
+ and thus tty->shutdown() occur via a work queue and simplify all
+ the drivers that use it.
+ */
+ if (tty_hung_up_p(filp)) {
+ /* serial_hangup already called serial_down at this point.
+ Another user may have already reopened the port but
+ serial_do_free is refcounted */
+ serial_do_free(port);
+ return;
+ }
if (tty_port_close_start(&port->port, tty, filp) == 0)
return;
struct usb_serial_port *port = tty->driver_data;
serial_do_down(port);
tty_port_hangup(&port->port);
- serial_do_free(port);
+ /* We must not free port yet - the USB serial layer depends on it's
+ continued existence */
}
static int serial_write(struct tty_struct *tty, const unsigned char *buf,
struct usb_serial_port *port = tty->driver_data;
dbg("%s = port %d", __func__, port->number);
- WARN_ON(!port->port.count);
/* if the device was unplugged then any remaining characters
fell out of the connector ;) */
if (port->serial->disconnected)
US_BULK_GET_MAX_LUN,
USB_DIR_IN | USB_TYPE_CLASS |
USB_RECIP_INTERFACE,
- 0, us->ifnum, us->iobuf, 1, HZ);
+ 0, us->ifnum, us->iobuf, 1, 10*HZ);
US_DEBUGP("GetMaxLUN command result is %d, data is %d\n",
result, us->iobuf[0]);
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
+/* Reported by Rogerio Brito <rbrito@ime.usp.br> */
+UNUSUAL_DEV( 0x067b, 0x2317, 0x0001, 0x001,
+ "Prolific Technology, Inc.",
+ "Mass Storage Device",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_NOT_LOCKABLE ),
+
/* Reported by Richard -=[]=- <micro_flyer@hotmail.com> */
/* Change to bcdDeviceMin (0x0100 to 0x0001) reported by
* Thomas Bartosik <tbartdev@gmx-topmail.de> */
config FB_INTEL
tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && FB && PCI && X86 && AGP_INTEL
+ depends on EXPERIMENTAL && FB && PCI && X86 && AGP_INTEL && EMBEDDED
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FB_BOOT_VESA_SUPPORT if FB_INTEL = y
+ depends on !DRM_I915
help
This driver supports the on-board graphics built in to the Intel
830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets.
if (jornada_ssp_byte(SETBRIGHTNESS) != TXDUMMY) {
printk(KERN_INFO "bl : failed to set brightness\n");
ret = -ETIMEDOUT;
- goto out
+ goto out;
}
/* at this point we expect that the mcu has accepted
struct backlight_device *bl = platform_get_drvdata(pdev);
struct pwm_bl_data *pb = dev_get_drvdata(&bl->dev);
+ if (pb->notify)
+ pb->notify(0);
pwm_config(pb->pwm, 0, pb->period);
pwm_disable(pb->pwm);
return 0;
new_rows = FBCON_SWAP(ops->rotate, info->var.yres, info->var.xres);
new_cols /= vc->vc_font.width;
new_rows /= vc->vc_font.height;
- vc_resize(vc, new_cols, new_rows);
/*
* We must always set the mode. The mode of the previous console
* vc_{cols,rows}, but we must not set those if we are only
* resizing the console.
*/
- if (!init) {
+ if (init) {
vc->vc_cols = new_cols;
vc->vc_rows = new_rows;
- }
+ } else
+ vc_resize(vc, new_cols, new_rows);
if (logo)
fbcon_prepare_logo(vc, info, cols, rows, new_cols, new_rows);
width = (width + 7) & ~7;
for (i = 0; i < height; i++) {
- for (j = 0; j < width; j++) {
+ for (j = 0; j < width - shift; j++) {
if (pattern_test_bit(j, i, width, in))
pattern_set_bit(width - (1 + j + shift),
height - (1 + i),
#ifdef CONFIG_PCI
unsigned long fb_base, rom_base;
unsigned int fb_len, rom_len;
+ int err;
struct sti_struct *sti;
- pci_enable_device(pd);
+ err = pci_enable_device(pd);
+ if (err < 0) {
+ dev_err(&pd->dev, "Cannot enable PCI device\n");
+ return err;
+ }
fb_base = pci_resource_start(pd, 0);
fb_len = pci_resource_len(pd, 0);
/* Register drivers for native & PCI cards */
register_parisc_driver(&pa_sti_driver);
- pci_register_driver(&pci_sti_driver);
+ WARN_ON(pci_register_driver(&pci_sti_driver));
/* if we didn't find the given default sti, take the first one */
if (!default_sti)
static int edid_checksum(unsigned char *edid)
{
- unsigned char i, csum = 0, all_null = 0;
- int err = 0, fix = check_edid(edid);
+ unsigned char csum = 0, all_null = 0;
+ int i, err = 0, fix = check_edid(edid);
if (fix)
fix_edid(edid, fix);
}
static int mx3fb_blank(int blank, struct fb_info *fbi);
-static int mx3fb_map_video_memory(struct fb_info *fbi, unsigned int mem_len);
+static int mx3fb_map_video_memory(struct fb_info *fbi, unsigned int mem_len,
+ bool lock);
static int mx3fb_unmap_video_memory(struct fb_info *fbi);
/**
complete(&mx3_fbi->flip_cmpl);
}
-/**
- * mx3fb_set_par() - set framebuffer parameters and change the operating mode.
- * @fbi: framebuffer information pointer.
- * @return: 0 on success or negative error code on failure.
- */
-static int mx3fb_set_par(struct fb_info *fbi)
+static int __set_par(struct fb_info *fbi, bool lock)
{
u32 mem_len;
struct ipu_di_signal_cfg sig_cfg;
struct idmac_video_param *video = &ichan->params.video;
struct scatterlist *sg = mx3_fbi->sg;
- dev_dbg(mx3fb->dev, "%s [%c]\n", __func__, list_empty(&ichan->queue) ? '-' : '+');
-
- mutex_lock(&mx3_fbi->mutex);
-
/* Total cleanup */
if (mx3_fbi->txd)
sdc_disable_channel(mx3_fbi);
if (fbi->fix.smem_start)
mx3fb_unmap_video_memory(fbi);
- if (mx3fb_map_video_memory(fbi, mem_len) < 0) {
- mutex_unlock(&mx3_fbi->mutex);
+ if (mx3fb_map_video_memory(fbi, mem_len, lock) < 0)
return -ENOMEM;
- }
}
sg_init_table(&sg[0], 1);
fbi->var.vsync_len,
fbi->var.lower_margin +
fbi->var.vsync_len, sig_cfg) != 0) {
- mutex_unlock(&mx3_fbi->mutex);
dev_err(fbi->device,
"mx3fb: Error initializing panel.\n");
return -EINVAL;
if (mx3_fbi->blank == FB_BLANK_UNBLANK)
sdc_enable_channel(mx3_fbi);
+ return 0;
+}
+
+/**
+ * mx3fb_set_par() - set framebuffer parameters and change the operating mode.
+ * @fbi: framebuffer information pointer.
+ * @return: 0 on success or negative error code on failure.
+ */
+static int mx3fb_set_par(struct fb_info *fbi)
+{
+ struct mx3fb_info *mx3_fbi = fbi->par;
+ struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
+ struct idmac_channel *ichan = mx3_fbi->idmac_channel;
+ int ret;
+
+ dev_dbg(mx3fb->dev, "%s [%c]\n", __func__, list_empty(&ichan->queue) ? '-' : '+');
+
+ mutex_lock(&mx3_fbi->mutex);
+
+ ret = __set_par(fbi, true);
+
mutex_unlock(&mx3_fbi->mutex);
- return 0;
+ return ret;
}
/**
return ret;
}
-/**
- * mx3fb_blank() - blank the display.
- */
-static int mx3fb_blank(int blank, struct fb_info *fbi)
+static void __blank(int blank, struct fb_info *fbi)
{
struct mx3fb_info *mx3_fbi = fbi->par;
struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
- dev_dbg(fbi->device, "%s, blank = %d, base %p, len %u\n", __func__,
- blank, fbi->screen_base, fbi->fix.smem_len);
-
- if (mx3_fbi->blank == blank)
- return 0;
-
- mutex_lock(&mx3_fbi->mutex);
mx3_fbi->blank = blank;
switch (blank) {
sdc_set_brightness(mx3fb, mx3fb->backlight_level);
break;
}
+}
+
+/**
+ * mx3fb_blank() - blank the display.
+ */
+static int mx3fb_blank(int blank, struct fb_info *fbi)
+{
+ struct mx3fb_info *mx3_fbi = fbi->par;
+
+ dev_dbg(fbi->device, "%s, blank = %d, base %p, len %u\n", __func__,
+ blank, fbi->screen_base, fbi->fix.smem_len);
+
+ if (mx3_fbi->blank == blank)
+ return 0;
+
+ mutex_lock(&mx3_fbi->mutex);
+ __blank(blank, fbi);
mutex_unlock(&mx3_fbi->mutex);
return 0;
* mx3fb_map_video_memory() - allocates the DRAM memory for the frame buffer.
* @fbi: framebuffer information pointer
* @mem_len: length of mapped memory
+ * @lock: do not lock during initialisation
* @return: Error code indicating success or failure
*
* This buffer is remapped into a non-cached, non-buffered, memory region to
* area is remapped, all virtual memory access to the video memory should occur
* at the new region.
*/
-static int mx3fb_map_video_memory(struct fb_info *fbi, unsigned int mem_len)
+static int mx3fb_map_video_memory(struct fb_info *fbi, unsigned int mem_len,
+ bool lock)
{
int retval = 0;
dma_addr_t addr;
goto err0;
}
- mutex_lock(&fbi->mm_lock);
+ if (lock)
+ mutex_lock(&fbi->mm_lock);
fbi->fix.smem_start = addr;
fbi->fix.smem_len = mem_len;
- mutex_unlock(&fbi->mm_lock);
+ if (lock)
+ mutex_unlock(&fbi->mm_lock);
dev_dbg(fbi->device, "allocated fb @ p=0x%08x, v=0x%p, size=%d.\n",
(uint32_t) fbi->fix.smem_start, fbi->screen_base, fbi->fix.smem_len);
init_completion(&mx3fbi->flip_cmpl);
disable_irq(ichan->eof_irq);
dev_dbg(mx3fb->dev, "disabling irq %d\n", ichan->eof_irq);
+ ret = __set_par(fbi, false);
+ if (ret < 0)
+ goto esetpar;
+
+ __blank(FB_BLANK_UNBLANK, fbi);
dev_info(dev, "registered, using mode %s\n", fb_mode);
struct s3c_fb *sfb = platform_get_drvdata(pdev);
int win;
- for (win = 0; win <= S3C_FB_MAX_WIN; win++)
+ for (win = 0; win < S3C_FB_MAX_WIN; win++)
if (sfb->windows[win])
s3c_fb_release_win(sfb, sfb->windows[win]);
struct s3c_fb_win *win;
int win_no;
- for (win_no = S3C_FB_MAX_WIN; win_no >= 0; win_no--) {
+ for (win_no = S3C_FB_MAX_WIN - 1; win_no >= 0; win_no--) {
win = sfb->windows[win_no];
if (!win)
continue;
/* tell the board code to enable the panel */
for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
ch = &priv->ch[k];
+ if (!ch->enabled)
+ continue;
+
board_cfg = &ch->cfg.board_cfg;
if (board_cfg->display_on)
board_cfg->display_on(board_cfg->board_data);
/* clean up deferred io and ask board code to disable panel */
for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
ch = &priv->ch[k];
+ if (!ch->enabled)
+ continue;
/* deferred io mode:
* flush frame, and wait for frame end interrupt
viafb_dvi_set_mode(viafb_get_mode_index
(viaparinfo->tmds_setting_info->h_active,
viaparinfo->tmds_setting_info->
- v_active, 1),
+ v_active),
video_bpp1, viaparinfo->
tmds_setting_info->iga_path);
} else {
viafb_dvi_set_mode(viafb_get_mode_index
(viaparinfo->tmds_setting_info->h_active,
viaparinfo->
- tmds_setting_info->v_active, 0),
+ tmds_setting_info->v_active),
video_bpp, viaparinfo->
tmds_setting_info->iga_path);
}
int reg_num = 0;
struct io_reg *lcd_patch_reg = NULL;
- if (viaparinfo->lvds_setting_info->iga_path == IGA2)
- vmode_index = viafb_get_mode_index(set_hres, set_vres, 1);
- else
- vmode_index = viafb_get_mode_index(set_hres, set_vres, 0);
+ vmode_index = viafb_get_mode_index(set_hres, set_vres);
switch (panel_id) {
/* LCD 800x600 */
case LCD_PANEL_ID1_800X600:
int reg_num = 0;
struct io_reg *lcd_patch_reg = NULL;
- if (viaparinfo->lvds_setting_info->iga_path == IGA2)
- vmode_index = viafb_get_mode_index(set_hres, set_vres, 1);
- else
- vmode_index = viafb_get_mode_index(set_hres, set_vres, 0);
+ vmode_index = viafb_get_mode_index(set_hres, set_vres);
switch (panel_id) {
case LCD_PANEL_ID5_1400X1050:
{
int vmode_index;
- if (viaparinfo->lvds_setting_info->iga_path == IGA2)
- vmode_index = viafb_get_mode_index(set_hres, set_vres, 1);
- else
- vmode_index = viafb_get_mode_index(set_hres, set_vres, 0);
+ vmode_index = viafb_get_mode_index(set_hres, set_vres);
viafb_unlock_crt();
/* video mode */
static char *viafb_mode = "640x480";
static char *viafb_mode1 = "640x480";
-static int viafb_resMode = VIA_RES_640X480;
/* Added for specifying active devices.*/
char *viafb_active_dev = "";
/* Mode information */
static const struct viafb_modeinfo viafb_modentry[] = {
- {480, 640, VIA_RES_480X640, "480x640"},
- {640, 480, VIA_RES_640X480, "640x480"},
- {800, 480, VIA_RES_800X480, "800x480"},
- {800, 600, VIA_RES_800X600, "800x600"},
- {1024, 768, VIA_RES_1024X768, "1024x768"},
- {1152, 864, VIA_RES_1152X864, "1152x864"},
- {1280, 1024, VIA_RES_1280X1024, "1280x1024"},
- {1600, 1200, VIA_RES_1600X1200, "1600x1200"},
- {1440, 1050, VIA_RES_1440X1050, "1440x1050"},
- {1280, 768, VIA_RES_1280X768, "1280x768"},
- {1280, 800, VIA_RES_1280X800, "1280x800"},
- {1280, 960, VIA_RES_1280X960, "1280x960"},
- {1920, 1440, VIA_RES_1920X1440, "1920x1440"},
- {848, 480, VIA_RES_848X480, "848x480"},
- {1400, 1050, VIA_RES_1400X1050, "1400x1050"},
- {720, 480, VIA_RES_720X480, "720x480"},
- {720, 576, VIA_RES_720X576, "720x576"},
- {1024, 512, VIA_RES_1024X512, "1024x512"},
- {1024, 576, VIA_RES_1024X576, "1024x576"},
- {1024, 600, VIA_RES_1024X600, "1024x600"},
- {1280, 720, VIA_RES_1280X720, "1280x720"},
- {1920, 1080, VIA_RES_1920X1080, "1920x1080"},
- {1366, 768, VIA_RES_1368X768, "1368x768"},
- {1680, 1050, VIA_RES_1680X1050, "1680x1050"},
- {960, 600, VIA_RES_960X600, "960x600"},
- {1000, 600, VIA_RES_1000X600, "1000x600"},
- {1024, 576, VIA_RES_1024X576, "1024x576"},
- {1024, 600, VIA_RES_1024X600, "1024x600"},
- {1088, 612, VIA_RES_1088X612, "1088x612"},
- {1152, 720, VIA_RES_1152X720, "1152x720"},
- {1200, 720, VIA_RES_1200X720, "1200x720"},
- {1280, 600, VIA_RES_1280X600, "1280x600"},
- {1360, 768, VIA_RES_1360X768, "1360x768"},
- {1440, 900, VIA_RES_1440X900, "1440x900"},
- {1600, 900, VIA_RES_1600X900, "1600x900"},
- {1600, 1024, VIA_RES_1600X1024, "1600x1024"},
- {1792, 1344, VIA_RES_1792X1344, "1792x1344"},
- {1856, 1392, VIA_RES_1856X1392, "1856x1392"},
- {1920, 1200, VIA_RES_1920X1200, "1920x1200"},
- {2048, 1536, VIA_RES_2048X1536, "2048x1536"},
- {0, 0, VIA_RES_INVALID, "640x480"}
+ {480, 640, VIA_RES_480X640},
+ {640, 480, VIA_RES_640X480},
+ {800, 480, VIA_RES_800X480},
+ {800, 600, VIA_RES_800X600},
+ {1024, 768, VIA_RES_1024X768},
+ {1152, 864, VIA_RES_1152X864},
+ {1280, 1024, VIA_RES_1280X1024},
+ {1600, 1200, VIA_RES_1600X1200},
+ {1440, 1050, VIA_RES_1440X1050},
+ {1280, 768, VIA_RES_1280X768,},
+ {1280, 800, VIA_RES_1280X800},
+ {1280, 960, VIA_RES_1280X960},
+ {1920, 1440, VIA_RES_1920X1440},
+ {848, 480, VIA_RES_848X480},
+ {1400, 1050, VIA_RES_1400X1050},
+ {720, 480, VIA_RES_720X480},
+ {720, 576, VIA_RES_720X576},
+ {1024, 512, VIA_RES_1024X512},
+ {1024, 576, VIA_RES_1024X576},
+ {1024, 600, VIA_RES_1024X600},
+ {1280, 720, VIA_RES_1280X720},
+ {1920, 1080, VIA_RES_1920X1080},
+ {1366, 768, VIA_RES_1368X768},
+ {1680, 1050, VIA_RES_1680X1050},
+ {960, 600, VIA_RES_960X600},
+ {1000, 600, VIA_RES_1000X600},
+ {1024, 576, VIA_RES_1024X576},
+ {1024, 600, VIA_RES_1024X600},
+ {1088, 612, VIA_RES_1088X612},
+ {1152, 720, VIA_RES_1152X720},
+ {1200, 720, VIA_RES_1200X720},
+ {1280, 600, VIA_RES_1280X600},
+ {1360, 768, VIA_RES_1360X768},
+ {1440, 900, VIA_RES_1440X900},
+ {1600, 900, VIA_RES_1600X900},
+ {1600, 1024, VIA_RES_1600X1024},
+ {1792, 1344, VIA_RES_1792X1344},
+ {1856, 1392, VIA_RES_1856X1392},
+ {1920, 1200, VIA_RES_1920X1200},
+ {2048, 1536, VIA_RES_2048X1536},
+ {0, 0, VIA_RES_INVALID}
};
static struct fb_ops viafb_ops;
if (var->vmode & FB_VMODE_INTERLACED || var->vmode & FB_VMODE_DOUBLE)
return -EINVAL;
- vmode_index = viafb_get_mode_index(var->xres, var->yres, 0);
+ vmode_index = viafb_get_mode_index(var->xres, var->yres);
if (vmode_index == VIA_RES_INVALID) {
DEBUG_MSG(KERN_INFO
"viafb: Mode %dx%dx%d not supported!!\n",
viafb_update_device_setting(info->var.xres, info->var.yres,
info->var.bits_per_pixel, viafb_refresh, 0);
- vmode_index = viafb_get_mode_index(info->var.xres, info->var.yres, 0);
+ vmode_index = viafb_get_mode_index(info->var.xres, info->var.yres);
if (viafb_SAMM_ON == 1) {
DEBUG_MSG(KERN_INFO
"viafb_second_xres = %d, viafb_second_yres = %d, bpp = %d\n",
viafb_second_xres, viafb_second_yres, viafb_bpp1);
vmode_index1 = viafb_get_mode_index(viafb_second_xres,
- viafb_second_yres, 1);
+ viafb_second_yres);
DEBUG_MSG(KERN_INFO "->viafb_SAMM_ON: index=%d\n",
vmode_index1);
return 0;
}
-int viafb_get_mode_index(int hres, int vres, int flag)
+int viafb_get_mode_index(int hres, int vres)
{
u32 i;
DEBUG_MSG(KERN_INFO "viafb_get_mode_index!\n");
viafb_modentry[i].yres == vres)
break;
- viafb_resMode = viafb_modentry[i].mode_index;
- if (flag)
- viafb_mode1 = viafb_modentry[i].mode_res;
- else
- viafb_mode = viafb_modentry[i].mode_res;
-
- return viafb_resMode;
+ return viafb_modentry[i].mode_index;
}
static void check_available_device_to_enable(int device_id)
strict_strtoul(tmpc, 0, &default_xres);
strict_strtoul(tmpm, 0, &default_yres);
- vmode_index = viafb_get_mode_index(default_xres, default_yres, 0);
+ vmode_index = viafb_get_mode_index(default_xres, default_yres);
DEBUG_MSG(KERN_INFO "0->index=%d\n", vmode_index);
if (viafb_SAMM_ON == 1) {
u32 xres;
u32 yres;
int mode_index;
- char *mode_res;
};
extern unsigned int viafb_second_virtual_yres;
extern unsigned int viafb_second_virtual_xres;
void viafb_memory_pitch_patch(struct fb_info *info);
void viafb_fill_var_timing_info(struct fb_var_screeninfo *var, int refresh,
int mode_index);
-int viafb_get_mode_index(int hres, int vres, int flag);
+int viafb_get_mode_index(int hres, int vres);
u8 viafb_gpio_i2c_read_lvds(struct lvds_setting_information
*plvds_setting_info, struct lvds_chip_information
*plvds_chip_info, u8 index);
xenfb_init_shared_page(info, fb_info);
+ ret = xenfb_connect_backend(dev, info);
+ if (ret < 0)
+ goto error;
+
ret = register_framebuffer(fb_info);
if (ret) {
fb_deferred_io_cleanup(fb_info);
}
info->fb_info = fb_info;
- ret = xenfb_connect_backend(dev, info);
- if (ret < 0)
- goto error;
-
xenfb_make_preferred_console();
return 0;
char (*msix_names)[256];
/* Number of available vectors */
unsigned msix_vectors;
- /* Vectors allocated */
+ /* Vectors allocated, excluding per-vq vectors if any */
unsigned msix_used_vectors;
+ /* Whether we have vector per vq */
+ bool per_vq_vectors;
};
/* Constants for MSI-X */
for (i = 0; i < vp_dev->msix_used_vectors; ++i)
free_irq(vp_dev->msix_entries[i].vector, vp_dev);
- vp_dev->msix_used_vectors = 0;
if (vp_dev->msix_enabled) {
/* Disable the vector used for configuration */
/* Flush the write out to device */
ioread16(vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
- vp_dev->msix_enabled = 0;
pci_disable_msix(vp_dev->pci_dev);
+ vp_dev->msix_enabled = 0;
+ vp_dev->msix_vectors = 0;
}
-}
-static int vp_enable_msix(struct pci_dev *dev, struct msix_entry *entries,
- int *options, int noptions)
-{
- int i;
- for (i = 0; i < noptions; ++i)
- if (!pci_enable_msix(dev, entries, options[i]))
- return options[i];
- return -EBUSY;
+ vp_dev->msix_used_vectors = 0;
+ kfree(vp_dev->msix_names);
+ vp_dev->msix_names = NULL;
+ kfree(vp_dev->msix_entries);
+ vp_dev->msix_entries = NULL;
}
-static int vp_request_vectors(struct virtio_device *vdev, unsigned max_vqs)
+static int vp_request_vectors(struct virtio_device *vdev, int nvectors,
+ bool per_vq_vectors)
{
struct virtio_pci_device *vp_dev = to_vp_device(vdev);
const char *name = dev_name(&vp_dev->vdev.dev);
unsigned i, v;
int err = -ENOMEM;
- /* We want at most one vector per queue and one for config changes.
- * Fallback to separate vectors for config and a shared for queues.
- * Finally fall back to regular interrupts. */
- int options[] = { max_vqs + 1, 2 };
- int nvectors = max(options[0], options[1]);
+
+ if (!nvectors) {
+ /* Can't allocate MSI-X vectors, use regular interrupt */
+ vp_dev->msix_vectors = 0;
+ err = request_irq(vp_dev->pci_dev->irq, vp_interrupt,
+ IRQF_SHARED, name, vp_dev);
+ if (err)
+ return err;
+ vp_dev->intx_enabled = 1;
+ return 0;
+ }
vp_dev->msix_entries = kmalloc(nvectors * sizeof *vp_dev->msix_entries,
GFP_KERNEL);
if (!vp_dev->msix_entries)
- goto error_entries;
+ goto error;
vp_dev->msix_names = kmalloc(nvectors * sizeof *vp_dev->msix_names,
GFP_KERNEL);
if (!vp_dev->msix_names)
- goto error_names;
+ goto error;
for (i = 0; i < nvectors; ++i)
vp_dev->msix_entries[i].entry = i;
- err = vp_enable_msix(vp_dev->pci_dev, vp_dev->msix_entries,
- options, ARRAY_SIZE(options));
- if (err < 0) {
- /* Can't allocate enough MSI-X vectors, use regular interrupt */
- vp_dev->msix_vectors = 0;
- err = request_irq(vp_dev->pci_dev->irq, vp_interrupt,
- IRQF_SHARED, name, vp_dev);
- if (err)
- goto error_irq;
- vp_dev->intx_enabled = 1;
- } else {
- vp_dev->msix_vectors = err;
- vp_dev->msix_enabled = 1;
-
- /* Set the vector used for configuration */
- v = vp_dev->msix_used_vectors;
- snprintf(vp_dev->msix_names[v], sizeof *vp_dev->msix_names,
- "%s-config", name);
- err = request_irq(vp_dev->msix_entries[v].vector,
- vp_config_changed, 0, vp_dev->msix_names[v],
- vp_dev);
- if (err)
- goto error_irq;
- ++vp_dev->msix_used_vectors;
-
- iowrite16(v, vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
- /* Verify we had enough resources to assign the vector */
- v = ioread16(vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
- if (v == VIRTIO_MSI_NO_VECTOR) {
- err = -EBUSY;
- goto error_irq;
- }
+ err = pci_enable_msix(vp_dev->pci_dev, vp_dev->msix_entries, nvectors);
+ if (err > 0)
+ err = -ENOSPC;
+ if (err)
+ goto error;
+ vp_dev->msix_vectors = nvectors;
+ vp_dev->msix_enabled = 1;
+
+ /* Set the vector used for configuration */
+ v = vp_dev->msix_used_vectors;
+ snprintf(vp_dev->msix_names[v], sizeof *vp_dev->msix_names,
+ "%s-config", name);
+ err = request_irq(vp_dev->msix_entries[v].vector,
+ vp_config_changed, 0, vp_dev->msix_names[v],
+ vp_dev);
+ if (err)
+ goto error;
+ ++vp_dev->msix_used_vectors;
+
+ iowrite16(v, vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
+ /* Verify we had enough resources to assign the vector */
+ v = ioread16(vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
+ if (v == VIRTIO_MSI_NO_VECTOR) {
+ err = -EBUSY;
+ goto error;
}
- if (vp_dev->msix_vectors && vp_dev->msix_vectors != max_vqs + 1) {
+ if (!per_vq_vectors) {
/* Shared vector for all VQs */
v = vp_dev->msix_used_vectors;
snprintf(vp_dev->msix_names[v], sizeof *vp_dev->msix_names,
vp_vring_interrupt, 0, vp_dev->msix_names[v],
vp_dev);
if (err)
- goto error_irq;
+ goto error;
++vp_dev->msix_used_vectors;
}
return 0;
-error_irq:
+error:
vp_free_vectors(vdev);
- kfree(vp_dev->msix_names);
-error_names:
- kfree(vp_dev->msix_entries);
-error_entries:
return err;
}
static struct virtqueue *vp_find_vq(struct virtio_device *vdev, unsigned index,
void (*callback)(struct virtqueue *vq),
- const char *name)
+ const char *name,
+ u16 vector)
{
struct virtio_pci_device *vp_dev = to_vp_device(vdev);
struct virtio_pci_vq_info *info;
struct virtqueue *vq;
unsigned long flags, size;
- u16 num, vector;
+ u16 num;
int err;
/* Select the queue we're interested in */
info->queue_index = index;
info->num = num;
- info->vector = VIRTIO_MSI_NO_VECTOR;
+ info->vector = vector;
size = PAGE_ALIGN(vring_size(num, VIRTIO_PCI_VRING_ALIGN));
info->queue = alloc_pages_exact(size, GFP_KERNEL|__GFP_ZERO);
vq->priv = info;
info->vq = vq;
- /* allocate per-vq vector if available and necessary */
- if (callback && vp_dev->msix_used_vectors < vp_dev->msix_vectors) {
- vector = vp_dev->msix_used_vectors;
- snprintf(vp_dev->msix_names[vector], sizeof *vp_dev->msix_names,
- "%s-%s", dev_name(&vp_dev->vdev.dev), name);
- err = request_irq(vp_dev->msix_entries[vector].vector,
- vring_interrupt, 0,
- vp_dev->msix_names[vector], vq);
- if (err)
- goto out_request_irq;
- info->vector = vector;
- ++vp_dev->msix_used_vectors;
- } else
- vector = VP_MSIX_VQ_VECTOR;
-
- if (callback && vp_dev->msix_enabled) {
+ if (vector != VIRTIO_MSI_NO_VECTOR) {
iowrite16(vector, vp_dev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR);
vector = ioread16(vp_dev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR);
if (vector == VIRTIO_MSI_NO_VECTOR) {
return vq;
out_assign:
- if (info->vector != VIRTIO_MSI_NO_VECTOR) {
- free_irq(vp_dev->msix_entries[info->vector].vector, vq);
- --vp_dev->msix_used_vectors;
- }
-out_request_irq:
vring_del_virtqueue(vq);
out_activate_queue:
iowrite32(0, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_PFN);
{
struct virtio_pci_device *vp_dev = to_vp_device(vq->vdev);
struct virtio_pci_vq_info *info = vq->priv;
- unsigned long size;
+ unsigned long flags, size;
- iowrite16(info->queue_index, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_SEL);
+ spin_lock_irqsave(&vp_dev->lock, flags);
+ list_del(&info->node);
+ spin_unlock_irqrestore(&vp_dev->lock, flags);
- if (info->vector != VIRTIO_MSI_NO_VECTOR)
- free_irq(vp_dev->msix_entries[info->vector].vector, vq);
+ iowrite16(info->queue_index, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_SEL);
if (vp_dev->msix_enabled) {
iowrite16(VIRTIO_MSI_NO_VECTOR,
/* the config->del_vqs() implementation */
static void vp_del_vqs(struct virtio_device *vdev)
{
+ struct virtio_pci_device *vp_dev = to_vp_device(vdev);
struct virtqueue *vq, *n;
+ struct virtio_pci_vq_info *info;
- list_for_each_entry_safe(vq, n, &vdev->vqs, list)
+ list_for_each_entry_safe(vq, n, &vdev->vqs, list) {
+ info = vq->priv;
+ if (vp_dev->per_vq_vectors)
+ free_irq(vp_dev->msix_entries[info->vector].vector, vq);
vp_del_vq(vq);
+ }
+ vp_dev->per_vq_vectors = false;
vp_free_vectors(vdev);
}
-/* the config->find_vqs() implementation */
-static int vp_find_vqs(struct virtio_device *vdev, unsigned nvqs,
- struct virtqueue *vqs[],
- vq_callback_t *callbacks[],
- const char *names[])
+static int vp_try_to_find_vqs(struct virtio_device *vdev, unsigned nvqs,
+ struct virtqueue *vqs[],
+ vq_callback_t *callbacks[],
+ const char *names[],
+ int nvectors,
+ bool per_vq_vectors)
{
- int vectors = 0;
- int i, err;
-
- /* How many vectors would we like? */
- for (i = 0; i < nvqs; ++i)
- if (callbacks[i])
- ++vectors;
+ struct virtio_pci_device *vp_dev = to_vp_device(vdev);
+ u16 vector;
+ int i, err, allocated_vectors;
- err = vp_request_vectors(vdev, vectors);
+ err = vp_request_vectors(vdev, nvectors, per_vq_vectors);
if (err)
goto error_request;
+ vp_dev->per_vq_vectors = per_vq_vectors;
+ allocated_vectors = vp_dev->msix_used_vectors;
for (i = 0; i < nvqs; ++i) {
- vqs[i] = vp_find_vq(vdev, i, callbacks[i], names[i]);
- if (IS_ERR(vqs[i]))
+ if (!callbacks[i] || !vp_dev->msix_enabled)
+ vector = VIRTIO_MSI_NO_VECTOR;
+ else if (vp_dev->per_vq_vectors)
+ vector = allocated_vectors++;
+ else
+ vector = VP_MSIX_VQ_VECTOR;
+ vqs[i] = vp_find_vq(vdev, i, callbacks[i], names[i], vector);
+ if (IS_ERR(vqs[i])) {
+ err = PTR_ERR(vqs[i]);
goto error_find;
+ }
+ /* allocate per-vq irq if available and necessary */
+ if (vp_dev->per_vq_vectors && vector != VIRTIO_MSI_NO_VECTOR) {
+ snprintf(vp_dev->msix_names[vector], sizeof *vp_dev->msix_names,
+ "%s-%s", dev_name(&vp_dev->vdev.dev), names[i]);
+ err = request_irq(vp_dev->msix_entries[vector].vector,
+ vring_interrupt, 0,
+ vp_dev->msix_names[vector], vqs[i]);
+ if (err) {
+ vp_del_vq(vqs[i]);
+ goto error_find;
+ }
+ }
}
return 0;
vp_del_vqs(vdev);
error_request:
- return PTR_ERR(vqs[i]);
+ return err;
+}
+
+/* the config->find_vqs() implementation */
+static int vp_find_vqs(struct virtio_device *vdev, unsigned nvqs,
+ struct virtqueue *vqs[],
+ vq_callback_t *callbacks[],
+ const char *names[])
+{
+ int vectors = 0;
+ int i, uninitialized_var(err);
+
+ /* How many vectors would we like? */
+ for (i = 0; i < nvqs; ++i)
+ if (callbacks[i])
+ ++vectors;
+
+ /* We want at most one vector per queue and one for config changes. */
+ err = vp_try_to_find_vqs(vdev, nvqs, vqs, callbacks, names,
+ vectors + 1, true);
+ if (!err)
+ return 0;
+ /* Fallback to separate vectors for config and a shared for queues. */
+ err = vp_try_to_find_vqs(vdev, nvqs, vqs, callbacks, names,
+ 2, false);
+ if (!err)
+ return 0;
+ /* Finally fall back to regular interrupts. */
+ err = vp_try_to_find_vqs(vdev, nvqs, vqs, callbacks, names,
+ 0, false);
+ return err;
}
static struct virtio_config_ops virtio_pci_config_ops = {
err = pci_register_driver(&virtio_pci_driver);
if (err)
- device_unregister(virtio_pci_root);
+ root_device_unregister(virtio_pci_root);
return err;
}
if (hdq_data->hdq_usecount) {
dev_dbg(&pdev->dev, "removed when use count is not zero\n");
+ mutex_unlock(&hdq_data->hdq_mutex);
return -EBUSY;
}
#include <linux/uaccess.h>
#include <asm/addrspace.h>
-#include <asm/ar7/ar7.h>
+#include <asm/mach-ar7/ar7.h>
#define DRVNAME "ar7_wdt"
#define LONGNAME "TI AR7 Watchdog Timer"
#include <linux/bitops.h>
#include <linux/uaccess.h>
#include <linux/clk.h>
+#include <linux/delay.h>
#define DRV_NAME "WDOG COH 901 327"
static void coh901327_enable(u16 timeout)
{
u16 val;
+ unsigned long freq;
+ unsigned long delay_ns;
clk_enable(clk);
/* Restart timer if it is disabled */
/* Acknowledge any pending interrupt so it doesn't just fire off */
writew(U300_WDOG_IER_WILL_BARK_IRQ_ACK_ENABLE,
virtbase + U300_WDOG_IER);
+ /*
+ * The interrupt is cleared in the 32 kHz clock domain.
+ * Wait 3 32 kHz cycles for it to take effect
+ */
+ freq = clk_get_rate(clk);
+ delay_ns = (1000000000 + freq - 1) / freq; /* Freq to ns and round up */
+ delay_ns = 3 * delay_ns; /* Wait 3 cycles */
+ ndelay(delay_ns);
/* Enable the watchdog interrupt */
writew(U300_WDOG_IMR_WILL_BARK_IRQ_ENABLE, virtbase + U300_WDOG_IMR);
/* Activate the watchdog timer */
#include <linux/watchdog.h>
#include <linux/timer.h>
#include <linux/uaccess.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#define WDT_VERSION "0.3"
static inline void ks8695_wdt_start(void)
{
unsigned long tmcon;
- unsigned long tval = wdt_time * CLOCK_TICK_RATE;
+ unsigned long tval = wdt_time * KS8695_CLOCK_RATE;
spin_lock(&ks8695_lock);
/* disable timer0 */
static int ks8695_wdt_settimeout(int new_time)
{
/*
- * All counting occurs at SLOW_CLOCK / 128 = 0.256 Hz
+ * All counting occurs at KS8695_CLOCK_RATE / 128 = 0.256 Hz
*
* Since WDV is a 16-bit counter, the maximum period is
* 65536 / 0.256 = 256 seconds.
* Return 0 upon success, -ERRNO upon failure.
*/
-static int v9fs_parse_options(struct v9fs_session_info *v9ses)
+static int v9fs_parse_options(struct v9fs_session_info *v9ses, char *opts)
{
char *options;
substring_t args[MAX_OPT_ARGS];
v9ses->debug = 0;
v9ses->cache = 0;
- if (!v9ses->options)
+ if (!opts)
return 0;
- options = kstrdup(v9ses->options, GFP_KERNEL);
+ options = kstrdup(opts, GFP_KERNEL);
if (!options) {
P9_DPRINTK(P9_DEBUG_ERROR,
"failed to allocate copy of option string\n");
v9ses->uid = ~0;
v9ses->dfltuid = V9FS_DEFUID;
v9ses->dfltgid = V9FS_DEFGID;
- if (data) {
- v9ses->options = kstrdup(data, GFP_KERNEL);
- if (!v9ses->options) {
- P9_DPRINTK(P9_DEBUG_ERROR,
- "failed to allocate copy of option string\n");
- retval = -ENOMEM;
- goto error;
- }
- }
- rc = v9fs_parse_options(v9ses);
+ rc = v9fs_parse_options(v9ses, data);
if (rc < 0) {
retval = rc;
goto error;
}
- v9ses->clnt = p9_client_create(dev_name, v9ses->options);
-
+ v9ses->clnt = p9_client_create(dev_name, data);
if (IS_ERR(v9ses->clnt)) {
retval = PTR_ERR(v9ses->clnt);
v9ses->clnt = NULL;
__putname(v9ses->uname);
__putname(v9ses->aname);
- kfree(v9ses->options);
}
/**
unsigned int afid;
unsigned int cache;
- char *options; /* copy of mount options */
char *uname; /* user name to mount as */
char *aname; /* name of remote hierarchy being mounted */
unsigned int maxdata; /* max data for client interface */
buffer = kmap(page);
offset = page_offset(page);
- retval = v9fs_file_readn(filp, buffer, NULL, offset, PAGE_CACHE_SIZE);
+ retval = v9fs_file_readn(filp, buffer, NULL, PAGE_CACHE_SIZE, offset);
if (retval < 0)
goto done;
/**
* v9fs_blank_wstat - helper function to setup a 9P stat structure
- * @v9ses: 9P session info (for determining extended mode)
* @wstat: structure to initialize
*
*/
struct inode *v9fs_get_inode(struct super_block *sb, int mode)
{
+ int err;
struct inode *inode;
struct v9fs_session_info *v9ses = sb->s_fs_info;
P9_DPRINTK(P9_DEBUG_VFS, "super block: %p mode: %o\n", sb, mode);
inode = new_inode(sb);
- if (inode) {
- inode->i_mode = mode;
- inode->i_uid = current_fsuid();
- inode->i_gid = current_fsgid();
- inode->i_blocks = 0;
- inode->i_rdev = 0;
- inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
- inode->i_mapping->a_ops = &v9fs_addr_operations;
-
- switch (mode & S_IFMT) {
- case S_IFIFO:
- case S_IFBLK:
- case S_IFCHR:
- case S_IFSOCK:
- if (!v9fs_extended(v9ses)) {
- P9_DPRINTK(P9_DEBUG_ERROR,
- "special files without extended mode\n");
- return ERR_PTR(-EINVAL);
- }
- init_special_inode(inode, inode->i_mode,
- inode->i_rdev);
- break;
- case S_IFREG:
- inode->i_op = &v9fs_file_inode_operations;
- inode->i_fop = &v9fs_file_operations;
- break;
- case S_IFLNK:
- if (!v9fs_extended(v9ses)) {
- P9_DPRINTK(P9_DEBUG_ERROR,
- "extended modes used w/o 9P2000.u\n");
- return ERR_PTR(-EINVAL);
- }
- inode->i_op = &v9fs_symlink_inode_operations;
- break;
- case S_IFDIR:
- inc_nlink(inode);
- if (v9fs_extended(v9ses))
- inode->i_op = &v9fs_dir_inode_operations_ext;
- else
- inode->i_op = &v9fs_dir_inode_operations;
- inode->i_fop = &v9fs_dir_operations;
- break;
- default:
- P9_DPRINTK(P9_DEBUG_ERROR,
- "BAD mode 0x%x S_IFMT 0x%x\n",
- mode, mode & S_IFMT);
- return ERR_PTR(-EINVAL);
- }
- } else {
+ if (!inode) {
P9_EPRINTK(KERN_WARNING, "Problem allocating inode\n");
return ERR_PTR(-ENOMEM);
}
+
+ inode->i_mode = mode;
+ inode->i_uid = current_fsuid();
+ inode->i_gid = current_fsgid();
+ inode->i_blocks = 0;
+ inode->i_rdev = 0;
+ inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
+ inode->i_mapping->a_ops = &v9fs_addr_operations;
+
+ switch (mode & S_IFMT) {
+ case S_IFIFO:
+ case S_IFBLK:
+ case S_IFCHR:
+ case S_IFSOCK:
+ if (!v9fs_extended(v9ses)) {
+ P9_DPRINTK(P9_DEBUG_ERROR,
+ "special files without extended mode\n");
+ err = -EINVAL;
+ goto error;
+ }
+ init_special_inode(inode, inode->i_mode, inode->i_rdev);
+ break;
+ case S_IFREG:
+ inode->i_op = &v9fs_file_inode_operations;
+ inode->i_fop = &v9fs_file_operations;
+ break;
+ case S_IFLNK:
+ if (!v9fs_extended(v9ses)) {
+ P9_DPRINTK(P9_DEBUG_ERROR,
+ "extended modes used w/o 9P2000.u\n");
+ err = -EINVAL;
+ goto error;
+ }
+ inode->i_op = &v9fs_symlink_inode_operations;
+ break;
+ case S_IFDIR:
+ inc_nlink(inode);
+ if (v9fs_extended(v9ses))
+ inode->i_op = &v9fs_dir_inode_operations_ext;
+ else
+ inode->i_op = &v9fs_dir_inode_operations;
+ inode->i_fop = &v9fs_dir_operations;
+ break;
+ default:
+ P9_DPRINTK(P9_DEBUG_ERROR, "BAD mode 0x%x S_IFMT 0x%x\n",
+ mode, mode & S_IFMT);
+ err = -EINVAL;
+ goto error;
+ }
+
return inode;
+
+error:
+ iput(inode);
+ return ERR_PTR(err);
}
/*
ret = NULL;
st = p9_client_stat(fid);
- if (IS_ERR(st)) {
- err = PTR_ERR(st);
- st = NULL;
- goto error;
- }
+ if (IS_ERR(st))
+ return ERR_CAST(st);
umode = p9mode2unixmode(v9ses, st->mode);
ret = v9fs_get_inode(sb, umode);
if (IS_ERR(ret)) {
err = PTR_ERR(ret);
- ret = NULL;
goto error;
}
v9fs_stat2inode(st, ret, sb);
ret->i_ino = v9fs_qid2ino(&st->qid);
+ p9stat_free(st);
kfree(st);
return ret;
error:
+ p9stat_free(st);
kfree(st);
- if (ret)
- iput(ret);
-
return ERR_PTR(err);
}
* @v9ses: session information
* @dir: directory that dentry is being created in
* @dentry: dentry that is being created
+ * @extension: 9p2000.u extension string to support devices, etc.
* @perm: create permissions
* @mode: open mode
- * @extension: 9p2000.u extension string to support devices, etc.
*
*/
static struct p9_fid *
dentry->d_op = &v9fs_dentry_operations;
d_instantiate(dentry, inode);
- v9fs_fid_add(dentry, fid);
+ err = v9fs_fid_add(dentry, fid);
+ if (err < 0)
+ goto error;
+
return ofid;
error:
static void
v9fs_fill_super(struct super_block *sb, struct v9fs_session_info *v9ses,
- int flags)
+ int flags, void *data)
{
sb->s_maxbytes = MAX_LFS_FILESIZE;
sb->s_blocksize_bits = fls(v9ses->maxdata - 1);
sb->s_flags = flags | MS_ACTIVE | MS_SYNCHRONOUS | MS_DIRSYNC |
MS_NOATIME;
+
+ save_mount_options(sb, data);
}
/**
struct v9fs_session_info *v9ses = NULL;
struct p9_wstat *st = NULL;
int mode = S_IRWXUGO | S_ISVTX;
- uid_t uid = current_fsuid();
- gid_t gid = current_fsgid();
struct p9_fid *fid;
int retval = 0;
P9_DPRINTK(P9_DEBUG_VFS, " \n");
- st = NULL;
v9ses = kzalloc(sizeof(struct v9fs_session_info), GFP_KERNEL);
if (!v9ses)
return -ENOMEM;
retval = PTR_ERR(sb);
goto free_stat;
}
- v9fs_fill_super(sb, v9ses, flags);
+ v9fs_fill_super(sb, v9ses, flags, data);
inode = v9fs_get_inode(sb, S_IFDIR | mode);
if (IS_ERR(inode)) {
goto release_sb;
}
- inode->i_uid = uid;
- inode->i_gid = gid;
-
root = d_alloc_root(inode);
if (!root) {
iput(inode);
simple_set_mnt(mnt, sb);
return 0;
-release_sb:
- deactivate_locked_super(sb);
-
free_stat:
+ p9stat_free(st);
kfree(st);
clunk_fid:
close_session:
v9fs_session_close(v9ses);
kfree(v9ses);
+ return retval;
+release_sb:
+ p9stat_free(st);
+ kfree(st);
+ deactivate_locked_super(sb);
return retval;
}
v9fs_session_close(v9ses);
kfree(v9ses);
+ s->s_fs_info = NULL;
P9_DPRINTK(P9_DEBUG_VFS, "exiting kill_super\n");
}
-/**
- * v9fs_show_options - Show mount options in /proc/mounts
- * @m: seq_file to write to
- * @mnt: mount descriptor
- *
- */
-
-static int v9fs_show_options(struct seq_file *m, struct vfsmount *mnt)
-{
- struct v9fs_session_info *v9ses = mnt->mnt_sb->s_fs_info;
-
- seq_printf(m, "%s", v9ses->options);
- return 0;
-}
-
static void
v9fs_umount_begin(struct super_block *sb)
{
static const struct super_operations v9fs_super_ops = {
.statfs = simple_statfs,
.clear_inode = v9fs_clear_inode,
- .show_options = v9fs_show_options,
+ .show_options = generic_show_options,
.umount_begin = v9fs_umount_begin,
};
source "fs/sysv/Kconfig"
source "fs/ufs/Kconfig"
source "fs/exofs/Kconfig"
-
-config NILFS2_FS
- tristate "NILFS2 file system support (EXPERIMENTAL)"
- depends on BLOCK && EXPERIMENTAL
- select CRC32
- help
- NILFS2 is a log-structured file system (LFS) supporting continuous
- snapshotting. In addition to versioning capability of the entire
- file system, users can even restore files mistakenly overwritten or
- destroyed just a few seconds ago. Since this file system can keep
- consistency like conventional LFS, it achieves quick recovery after
- system crashes.
-
- NILFS2 creates a number of checkpoints every few seconds or per
- synchronous write basis (unless there is no change). Users can
- select significant versions among continuously created checkpoints,
- and can change them into snapshots which will be preserved for long
- periods until they are changed back to checkpoints. Each
- snapshot is mountable as a read-only file system concurrently with
- its writable mount, and this feature is convenient for online backup.
-
- Some features including atime, extended attributes, and POSIX ACLs,
- are not supported yet.
-
- To compile this file system support as a module, choose M here: the
- module will be called nilfs2. If unsure, say N.
+source "fs/nilfs2/Kconfig"
endif # MISC_FILESYSTEMS
inode = page->mapping->host;
- ASSERT(file != NULL);
- key = file->private_data;
- ASSERT(key != NULL);
+ if (file) {
+ key = file->private_data;
+ ASSERT(key != NULL);
+ } else {
+ key = afs_request_key(AFS_FS_S(inode->i_sb)->volume->cell);
+ if (IS_ERR(key)) {
+ ret = PTR_ERR(key);
+ goto error_nokey;
+ }
+ }
_enter("{%x},{%lu},{%lu}", key_serial(key), inode->i_ino, page->index);
unlock_page(page);
}
+ if (!file)
+ key_put(key);
_leave(" = 0");
return 0;
error:
SetPageError(page);
unlock_page(page);
+ if (!file)
+ key_put(key);
+error_nokey:
_leave(" = %d", ret);
return ret;
}
}
/* Update the expiry counter if fs is busy */
- if (!may_umount_tree(mnt)) {
+ if (!may_umount_tree(path.mnt)) {
struct autofs_info *ino = autofs4_dentry_ino(top);
ino->last_used = jiffies;
goto done;
}
}
- /*
- * Now fill out the bss section. First pad the last page up
- * to the page boundary, and then perform a mmap to make sure
- * that there are zero-mapped pages up to and including the
- * last bss page.
- */
- if (padzero(elf_bss)) {
- error = -EFAULT;
- goto out_close;
- }
+ if (last_bss > elf_bss) {
+ /*
+ * Now fill out the bss section. First pad the last page up
+ * to the page boundary, and then perform a mmap to make sure
+ * that there are zero-mapped pages up to and including the
+ * last bss page.
+ */
+ if (padzero(elf_bss)) {
+ error = -EFAULT;
+ goto out_close;
+ }
- /* What we have mapped so far */
- elf_bss = ELF_PAGESTART(elf_bss + ELF_MIN_ALIGN - 1);
+ /* What we have mapped so far */
+ elf_bss = ELF_PAGESTART(elf_bss + ELF_MIN_ALIGN - 1);
- /* Map the last of the bss segment */
- if (last_bss > elf_bss) {
+ /* Map the last of the bss segment */
down_write(¤t->mm->mmap_sem);
error = do_brk(elf_bss, last_bss - elf_bss);
up_write(¤t->mm->mmap_sem);
if (IS_ERR(bprm.file))
return res;
+ bprm.cred = prepare_exec_creds();
+ res = -ENOMEM;
+ if (!bprm.cred)
+ goto out;
+
res = prepare_binprm(&bprm);
if (res <= (unsigned long)-4096)
res = load_flat_file(&bprm, libs, id, NULL);
- if (bprm.file) {
- allow_write_access(bprm.file);
- fput(bprm.file);
- bprm.file = NULL;
- }
+
+ abort_creds(bprm.cred);
+
+out:
+ allow_write_access(bprm.file);
+ fput(bprm.file);
+
return(res);
}
EXPORT_SYMBOL(bdget);
+/**
+ * bdgrab -- Grab a reference to an already referenced block device
+ * @bdev: Block device to grab a reference to.
+ */
+struct block_device *bdgrab(struct block_device *bdev)
+{
+ atomic_inc(&bdev->bd_inode->i_count);
+ return bdev;
+}
+
long nr_blockdev_pages(void)
{
struct block_device *bdev;
* list
*/
if (worker->idle) {
- spin_lock_irqsave(&worker->workers->lock, flags);
+ spin_lock(&worker->workers->lock);
worker->idle = 0;
list_move_tail(&worker->worker_list,
&worker->workers->worker_list);
- spin_unlock_irqrestore(&worker->workers->lock, flags);
+ spin_unlock(&worker->workers->lock);
}
if (!worker->working) {
wake = 1;
btrfs_disk_key_to_cpu(&k1, disk);
- if (k1.objectid > k2->objectid)
- return 1;
- if (k1.objectid < k2->objectid)
- return -1;
- if (k1.type > k2->type)
- return 1;
- if (k1.type < k2->type)
- return -1;
- if (k1.offset > k2->offset)
- return 1;
- if (k1.offset < k2->offset)
- return -1;
- return 0;
+ return btrfs_comp_cpu_keys(&k1, k2);
}
/*
BTRFS_NODEPTRS_PER_BLOCK(root) / 4)
return 0;
- if (btrfs_header_nritems(mid) > 2)
- return 0;
-
if (btrfs_header_nritems(mid) < 2)
err_on_enospc = 1;
struct extent_buffer *b;
int slot;
int ret;
+ int err;
int level;
int lowest_unlock = 1;
u8 lowest_level = 0;
p->locks[level] = 1;
if (cow) {
- int wret;
-
/*
* if we don't really need to cow this block
* then we don't want to set the path blocking,
btrfs_set_path_blocking(p);
- wret = btrfs_cow_block(trans, root, b,
- p->nodes[level + 1],
- p->slots[level + 1], &b);
- if (wret) {
+ err = btrfs_cow_block(trans, root, b,
+ p->nodes[level + 1],
+ p->slots[level + 1], &b);
+ if (err) {
free_extent_buffer(b);
- ret = wret;
+ ret = err;
goto done;
}
}
ret = bin_search(b, key, level, &slot);
if (level != 0) {
- if (ret && slot > 0)
+ int dec = 0;
+ if (ret && slot > 0) {
+ dec = 1;
slot -= 1;
+ }
p->slots[level] = slot;
- ret = setup_nodes_for_search(trans, root, p, b, level,
+ err = setup_nodes_for_search(trans, root, p, b, level,
ins_len);
- if (ret == -EAGAIN)
+ if (err == -EAGAIN)
goto again;
- else if (ret)
+ if (err) {
+ ret = err;
goto done;
+ }
b = p->nodes[level];
slot = p->slots[level];
unlock_up(p, level, lowest_unlock);
- /* this is only true while dropping a snapshot */
if (level == lowest_level) {
- ret = 0;
+ if (dec)
+ p->slots[level]++;
goto done;
}
- ret = read_block_for_search(trans, root, p,
+ err = read_block_for_search(trans, root, p,
&b, level, slot, key);
- if (ret == -EAGAIN)
+ if (err == -EAGAIN)
goto again;
-
- if (ret == -EIO)
+ if (err) {
+ ret = err;
goto done;
+ }
if (!p->skip_locking) {
- int lret;
-
btrfs_clear_path_blocking(p, NULL);
- lret = btrfs_try_spin_lock(b);
+ err = btrfs_try_spin_lock(b);
- if (!lret) {
+ if (!err) {
btrfs_set_path_blocking(p);
btrfs_tree_lock(b);
btrfs_clear_path_blocking(p, b);
p->slots[level] = slot;
if (ins_len > 0 &&
btrfs_leaf_free_space(root, b) < ins_len) {
- int sret;
-
btrfs_set_path_blocking(p);
- sret = split_leaf(trans, root, key,
- p, ins_len, ret == 0);
+ err = split_leaf(trans, root, key,
+ p, ins_len, ret == 0);
btrfs_clear_path_blocking(p, NULL);
- BUG_ON(sret > 0);
- if (sret) {
- ret = sret;
+ BUG_ON(err > 0);
+ if (err) {
+ ret = err;
goto done;
}
}
}
/* delete the leaf if it is mostly empty */
- if (used < BTRFS_LEAF_DATA_SIZE(root) / 2) {
+ if (used < BTRFS_LEAF_DATA_SIZE(root) / 3) {
/* push_leaf_left fixes the path.
* make sure the path still points to our leaf
* for possible call to del_ptr below
* calling this function.
*/
int btrfs_find_next_key(struct btrfs_root *root, struct btrfs_path *path,
- struct btrfs_key *key, int lowest_level,
+ struct btrfs_key *key, int level,
int cache_only, u64 min_trans)
{
- int level = lowest_level;
int slot;
struct extent_buffer *c;
c = path->nodes[level];
next:
if (slot >= btrfs_header_nritems(c)) {
- level++;
- if (level == BTRFS_MAX_LEVEL)
+ int ret;
+ int orig_lowest;
+ struct btrfs_key cur_key;
+ if (level + 1 >= BTRFS_MAX_LEVEL ||
+ !path->nodes[level + 1])
return 1;
- continue;
+
+ if (path->locks[level + 1]) {
+ level++;
+ continue;
+ }
+
+ slot = btrfs_header_nritems(c) - 1;
+ if (level == 0)
+ btrfs_item_key_to_cpu(c, &cur_key, slot);
+ else
+ btrfs_node_key_to_cpu(c, &cur_key, slot);
+
+ orig_lowest = path->lowest_level;
+ btrfs_release_path(root, path);
+ path->lowest_level = level;
+ ret = btrfs_search_slot(NULL, root, &cur_key, path,
+ 0, 0);
+ path->lowest_level = orig_lowest;
+ if (ret < 0)
+ return ret;
+
+ c = path->nodes[level];
+ slot = path->slots[level];
+ if (ret == 0)
+ slot++;
+ goto next;
}
+
if (level == 0)
btrfs_item_key_to_cpu(c, key, slot);
else {
* advance the path if there are now more items available.
*/
if (nritems > 0 && path->slots[0] < nritems - 1) {
- path->slots[0]++;
+ if (ret == 0)
+ path->slots[0]++;
ret = 0;
goto done;
}
path->slots[0]--;
btrfs_item_key_to_cpu(leaf, &found_key, path->slots[0]);
- if (found_key.type == type)
- return 0;
if (found_key.objectid < min_objectid)
break;
+ if (found_key.type == type)
+ return 0;
if (found_key.objectid == min_objectid &&
found_key.type < type)
break;
struct btrfs_extent_inline_ref {
u8 type;
- u64 offset;
+ __le64 offset;
} __attribute__ ((__packed__));
/* old style backrefs item */
struct list_head block_groups;
spinlock_t lock;
struct rw_semaphore groups_sem;
+ atomic_t caching_threads;
};
/*
/* first extent starting offset */
u64 window_start;
+ /* if this cluster simply points at a bitmap in the block group */
+ bool points_to_bitmap;
+
struct btrfs_block_group_cache *block_group;
/*
* when a cluster is allocated from a block group, we put the
struct list_head block_group_list;
};
+enum btrfs_caching_type {
+ BTRFS_CACHE_NO = 0,
+ BTRFS_CACHE_STARTED = 1,
+ BTRFS_CACHE_FINISHED = 2,
+};
+
struct btrfs_block_group_cache {
struct btrfs_key key;
struct btrfs_block_group_item item;
+ struct btrfs_fs_info *fs_info;
spinlock_t lock;
- struct mutex cache_mutex;
u64 pinned;
u64 reserved;
u64 flags;
- int cached;
+ u64 sectorsize;
+ int extents_thresh;
+ int free_extents;
+ int total_bitmaps;
int ro;
int dirty;
+ /* cache tracking stuff */
+ wait_queue_head_t caching_q;
+ int cached;
+
struct btrfs_space_info *space_info;
/* free space cache stuff */
spinlock_t tree_lock;
- struct rb_root free_space_bytes;
struct rb_root free_space_offset;
+ u64 free_space;
/* block group cache stuff */
struct rb_node cache_node;
struct mutex drop_mutex;
struct mutex volume_mutex;
struct mutex tree_reloc_mutex;
+ struct rw_semaphore extent_commit_sem;
/*
* this protects the ordered operations list only while we are
u64 bytes);
void btrfs_delalloc_free_space(struct btrfs_root *root, struct inode *inode,
u64 bytes);
+void btrfs_free_pinned_extents(struct btrfs_fs_info *info);
/* ctree.c */
int btrfs_bin_search(struct extent_buffer *eb, struct btrfs_key *key,
int level, int *slot);
{
int err;
+ bdi->name = "btrfs";
bdi->capabilities = BDI_CAP_MAP_COPY;
err = bdi_init(bdi);
if (err)
mutex_init(&fs_info->cleaner_mutex);
mutex_init(&fs_info->volume_mutex);
mutex_init(&fs_info->tree_reloc_mutex);
+ init_rwsem(&fs_info->extent_commit_sem);
btrfs_init_free_cluster(&fs_info->meta_alloc_cluster);
btrfs_init_free_cluster(&fs_info->data_alloc_cluster);
btrfs_super_chunk_root(disk_super),
blocksize, generation);
BUG_ON(!chunk_root->node);
+ if (!test_bit(EXTENT_BUFFER_UPTODATE, &chunk_root->node->bflags)) {
+ printk(KERN_WARNING "btrfs: failed to read chunk root on %s\n",
+ sb->s_id);
+ goto fail_chunk_root;
+ }
btrfs_set_root_node(&chunk_root->root_item, chunk_root->node);
chunk_root->commit_root = btrfs_root_node(chunk_root);
blocksize, generation);
if (!tree_root->node)
goto fail_chunk_root;
+ if (!test_bit(EXTENT_BUFFER_UPTODATE, &tree_root->node->bflags)) {
+ printk(KERN_WARNING "btrfs: failed to read tree root on %s\n",
+ sb->s_id);
+ goto fail_tree_root;
+ }
btrfs_set_root_node(&tree_root->root_item, tree_root->node);
tree_root->commit_root = btrfs_root_node(tree_root);
printk(KERN_ERR "btrfs: commit super ret %d\n", ret);
}
+ fs_info->closing = 2;
+ smp_mb();
+
if (fs_info->delalloc_bytes) {
printk(KERN_INFO "btrfs: at unmount delalloc count %llu\n",
(unsigned long long)fs_info->delalloc_bytes);
free_extent_buffer(root->fs_info->csum_root->commit_root);
btrfs_free_block_groups(root->fs_info);
+ btrfs_free_pinned_extents(root->fs_info);
del_fs_roots(fs_info);
#include <linux/blkdev.h>
#include <linux/sort.h>
#include <linux/rcupdate.h>
+#include <linux/kthread.h>
#include "compat.h"
#include "hash.h"
#include "ctree.h"
struct btrfs_root *extent_root, u64 alloc_bytes,
u64 flags, int force);
+static noinline int
+block_group_cache_done(struct btrfs_block_group_cache *cache)
+{
+ smp_mb();
+ return cache->cached == BTRFS_CACHE_FINISHED;
+}
+
static int block_group_bits(struct btrfs_block_group_cache *cache, u64 bits)
{
return (cache->flags & bits) == bits;
return ret;
}
+/*
+ * We always set EXTENT_LOCKED for the super mirror extents so we don't
+ * overwrite them, so those bits need to be unset. Also, if we are unmounting
+ * with pinned extents still sitting there because we had a block group caching,
+ * we need to clear those now, since we are done.
+ */
+void btrfs_free_pinned_extents(struct btrfs_fs_info *info)
+{
+ u64 start, end, last = 0;
+ int ret;
+
+ while (1) {
+ ret = find_first_extent_bit(&info->pinned_extents, last,
+ &start, &end,
+ EXTENT_LOCKED|EXTENT_DIRTY);
+ if (ret)
+ break;
+
+ clear_extent_bits(&info->pinned_extents, start, end,
+ EXTENT_LOCKED|EXTENT_DIRTY, GFP_NOFS);
+ last = end+1;
+ }
+}
+
+static int remove_sb_from_cache(struct btrfs_root *root,
+ struct btrfs_block_group_cache *cache)
+{
+ struct btrfs_fs_info *fs_info = root->fs_info;
+ u64 bytenr;
+ u64 *logical;
+ int stripe_len;
+ int i, nr, ret;
+
+ for (i = 0; i < BTRFS_SUPER_MIRROR_MAX; i++) {
+ bytenr = btrfs_sb_offset(i);
+ ret = btrfs_rmap_block(&root->fs_info->mapping_tree,
+ cache->key.objectid, bytenr,
+ 0, &logical, &nr, &stripe_len);
+ BUG_ON(ret);
+ while (nr--) {
+ try_lock_extent(&fs_info->pinned_extents,
+ logical[nr],
+ logical[nr] + stripe_len - 1, GFP_NOFS);
+ }
+ kfree(logical);
+ }
+
+ return 0;
+}
+
/*
* this is only called by cache_block_group, since we could have freed extents
* we need to check the pinned_extents for any extents that can't be used yet
* since their free space will be released as soon as the transaction commits.
*/
-static int add_new_free_space(struct btrfs_block_group_cache *block_group,
+static u64 add_new_free_space(struct btrfs_block_group_cache *block_group,
struct btrfs_fs_info *info, u64 start, u64 end)
{
- u64 extent_start, extent_end, size;
+ u64 extent_start, extent_end, size, total_added = 0;
int ret;
while (start < end) {
ret = find_first_extent_bit(&info->pinned_extents, start,
&extent_start, &extent_end,
- EXTENT_DIRTY);
+ EXTENT_DIRTY|EXTENT_LOCKED);
if (ret)
break;
start = extent_end + 1;
} else if (extent_start > start && extent_start < end) {
size = extent_start - start;
+ total_added += size;
ret = btrfs_add_free_space(block_group, start,
size);
BUG_ON(ret);
if (start < end) {
size = end - start;
+ total_added += size;
ret = btrfs_add_free_space(block_group, start, size);
BUG_ON(ret);
}
- return 0;
-}
-
-static int remove_sb_from_cache(struct btrfs_root *root,
- struct btrfs_block_group_cache *cache)
-{
- u64 bytenr;
- u64 *logical;
- int stripe_len;
- int i, nr, ret;
-
- for (i = 0; i < BTRFS_SUPER_MIRROR_MAX; i++) {
- bytenr = btrfs_sb_offset(i);
- ret = btrfs_rmap_block(&root->fs_info->mapping_tree,
- cache->key.objectid, bytenr, 0,
- &logical, &nr, &stripe_len);
- BUG_ON(ret);
- while (nr--) {
- btrfs_remove_free_space(cache, logical[nr],
- stripe_len);
- }
- kfree(logical);
- }
- return 0;
+ return total_added;
}
-static int cache_block_group(struct btrfs_root *root,
- struct btrfs_block_group_cache *block_group)
+static int caching_kthread(void *data)
{
+ struct btrfs_block_group_cache *block_group = data;
+ struct btrfs_fs_info *fs_info = block_group->fs_info;
+ u64 last = 0;
struct btrfs_path *path;
int ret = 0;
struct btrfs_key key;
struct extent_buffer *leaf;
int slot;
- u64 last;
-
- if (!block_group)
- return 0;
-
- root = root->fs_info->extent_root;
+ u64 total_found = 0;
- if (block_group->cached)
- return 0;
+ BUG_ON(!fs_info);
path = btrfs_alloc_path();
if (!path)
return -ENOMEM;
- path->reada = 2;
+ atomic_inc(&block_group->space_info->caching_threads);
+ last = max_t(u64, block_group->key.objectid, BTRFS_SUPER_INFO_OFFSET);
/*
- * we get into deadlocks with paths held by callers of this function.
- * since the alloc_mutex is protecting things right now, just
- * skip the locking here
+ * We don't want to deadlock with somebody trying to allocate a new
+ * extent for the extent root while also trying to search the extent
+ * root to add free space. So we skip locking and search the commit
+ * root, since its read-only
*/
path->skip_locking = 1;
- last = max_t(u64, block_group->key.objectid, BTRFS_SUPER_INFO_OFFSET);
+ path->search_commit_root = 1;
+ path->reada = 2;
+
key.objectid = last;
key.offset = 0;
btrfs_set_key_type(&key, BTRFS_EXTENT_ITEM_KEY);
- ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
+again:
+ /* need to make sure the commit_root doesn't disappear */
+ down_read(&fs_info->extent_commit_sem);
+
+ ret = btrfs_search_slot(NULL, fs_info->extent_root, &key, path, 0, 0);
if (ret < 0)
goto err;
while (1) {
+ smp_mb();
+ if (block_group->fs_info->closing > 1) {
+ last = (u64)-1;
+ break;
+ }
+
leaf = path->nodes[0];
slot = path->slots[0];
if (slot >= btrfs_header_nritems(leaf)) {
- ret = btrfs_next_leaf(root, path);
+ ret = btrfs_next_leaf(fs_info->extent_root, path);
if (ret < 0)
goto err;
- if (ret == 0)
- continue;
- else
+ else if (ret)
break;
+
+ if (need_resched() ||
+ btrfs_transaction_in_commit(fs_info)) {
+ leaf = path->nodes[0];
+
+ /* this shouldn't happen, but if the
+ * leaf is empty just move on.
+ */
+ if (btrfs_header_nritems(leaf) == 0)
+ break;
+ /*
+ * we need to copy the key out so that
+ * we are sure the next search advances
+ * us forward in the btree.
+ */
+ btrfs_item_key_to_cpu(leaf, &key, 0);
+ btrfs_release_path(fs_info->extent_root, path);
+ up_read(&fs_info->extent_commit_sem);
+ schedule_timeout(1);
+ goto again;
+ }
+
+ continue;
}
btrfs_item_key_to_cpu(leaf, &key, slot);
if (key.objectid < block_group->key.objectid)
break;
if (btrfs_key_type(&key) == BTRFS_EXTENT_ITEM_KEY) {
- add_new_free_space(block_group, root->fs_info, last,
- key.objectid);
-
+ total_found += add_new_free_space(block_group,
+ fs_info, last,
+ key.objectid);
last = key.objectid + key.offset;
}
+
+ if (total_found > (1024 * 1024 * 2)) {
+ total_found = 0;
+ wake_up(&block_group->caching_q);
+ }
next:
path->slots[0]++;
}
+ ret = 0;
- add_new_free_space(block_group, root->fs_info, last,
- block_group->key.objectid +
- block_group->key.offset);
+ total_found += add_new_free_space(block_group, fs_info, last,
+ block_group->key.objectid +
+ block_group->key.offset);
+
+ spin_lock(&block_group->lock);
+ block_group->cached = BTRFS_CACHE_FINISHED;
+ spin_unlock(&block_group->lock);
- block_group->cached = 1;
- remove_sb_from_cache(root, block_group);
- ret = 0;
err:
btrfs_free_path(path);
+ up_read(&fs_info->extent_commit_sem);
+ atomic_dec(&block_group->space_info->caching_threads);
+ wake_up(&block_group->caching_q);
+
+ return 0;
+}
+
+static int cache_block_group(struct btrfs_block_group_cache *cache)
+{
+ struct task_struct *tsk;
+ int ret = 0;
+
+ spin_lock(&cache->lock);
+ if (cache->cached != BTRFS_CACHE_NO) {
+ spin_unlock(&cache->lock);
+ return ret;
+ }
+ cache->cached = BTRFS_CACHE_STARTED;
+ spin_unlock(&cache->lock);
+
+ tsk = kthread_run(caching_kthread, cache, "btrfs-cache-%llu\n",
+ cache->key.objectid);
+ if (IS_ERR(tsk)) {
+ ret = PTR_ERR(tsk);
+ printk(KERN_ERR "error running thread %d\n", ret);
+ BUG();
+ }
+
return ret;
}
}
+static struct btrfs_block_group_cache *
+next_block_group(struct btrfs_root *root,
+ struct btrfs_block_group_cache *cache)
+{
+ struct rb_node *node;
+ spin_lock(&root->fs_info->block_group_cache_lock);
+ node = rb_next(&cache->cache_node);
+ btrfs_put_block_group(cache);
+ if (node) {
+ cache = rb_entry(node, struct btrfs_block_group_cache,
+ cache_node);
+ atomic_inc(&cache->count);
+ } else
+ cache = NULL;
+ spin_unlock(&root->fs_info->block_group_cache_lock);
+ return cache;
+}
+
int btrfs_write_dirty_block_groups(struct btrfs_trans_handle *trans,
struct btrfs_root *root)
{
- struct btrfs_block_group_cache *cache, *entry;
- struct rb_node *n;
+ struct btrfs_block_group_cache *cache;
int err = 0;
- int werr = 0;
struct btrfs_path *path;
u64 last = 0;
return -ENOMEM;
while (1) {
- cache = NULL;
- spin_lock(&root->fs_info->block_group_cache_lock);
- for (n = rb_first(&root->fs_info->block_group_cache_tree);
- n; n = rb_next(n)) {
- entry = rb_entry(n, struct btrfs_block_group_cache,
- cache_node);
- if (entry->dirty) {
- cache = entry;
- break;
- }
+ if (last == 0) {
+ err = btrfs_run_delayed_refs(trans, root,
+ (unsigned long)-1);
+ BUG_ON(err);
}
- spin_unlock(&root->fs_info->block_group_cache_lock);
- if (!cache)
- break;
+ cache = btrfs_lookup_first_block_group(root->fs_info, last);
+ while (cache) {
+ if (cache->dirty)
+ break;
+ cache = next_block_group(root, cache);
+ }
+ if (!cache) {
+ if (last == 0)
+ break;
+ last = 0;
+ continue;
+ }
cache->dirty = 0;
- last += cache->key.offset;
+ last = cache->key.objectid + cache->key.offset;
- err = write_one_cache_group(trans, root,
- path, cache);
- /*
- * if we fail to write the cache group, we want
- * to keep it marked dirty in hopes that a later
- * write will work
- */
- if (err) {
- werr = err;
- continue;
- }
+ err = write_one_cache_group(trans, root, path, cache);
+ BUG_ON(err);
+ btrfs_put_block_group(cache);
}
+
btrfs_free_path(path);
- return werr;
+ return 0;
}
int btrfs_extent_readonly(struct btrfs_root *root, u64 bytenr)
found->force_alloc = 0;
*space_info = found;
list_add_rcu(&found->list, &info->space_info);
+ atomic_set(&found->caching_threads, 0);
return 0;
}
struct btrfs_block_group_cache *cache;
struct btrfs_fs_info *fs_info = root->fs_info;
- if (pin) {
+ if (pin)
set_extent_dirty(&fs_info->pinned_extents,
bytenr, bytenr + num - 1, GFP_NOFS);
- } else {
- clear_extent_dirty(&fs_info->pinned_extents,
- bytenr, bytenr + num - 1, GFP_NOFS);
- }
while (num > 0) {
cache = btrfs_lookup_block_group(fs_info, bytenr);
spin_unlock(&cache->space_info->lock);
fs_info->total_pinned += len;
} else {
+ int unpin = 0;
+
+ /*
+ * in order to not race with the block group caching, we
+ * only want to unpin the extent if we are cached. If
+ * we aren't cached, we want to start async caching this
+ * block group so we can free the extent the next time
+ * around.
+ */
spin_lock(&cache->space_info->lock);
spin_lock(&cache->lock);
- cache->pinned -= len;
- cache->space_info->bytes_pinned -= len;
+ unpin = (cache->cached == BTRFS_CACHE_FINISHED);
+ if (likely(unpin)) {
+ cache->pinned -= len;
+ cache->space_info->bytes_pinned -= len;
+ fs_info->total_pinned -= len;
+ }
spin_unlock(&cache->lock);
spin_unlock(&cache->space_info->lock);
- fs_info->total_pinned -= len;
- if (cache->cached)
+
+ if (likely(unpin))
+ clear_extent_dirty(&fs_info->pinned_extents,
+ bytenr, bytenr + len -1,
+ GFP_NOFS);
+ else
+ cache_block_group(cache);
+
+ if (unpin)
btrfs_add_free_space(cache, bytenr, len);
}
btrfs_put_block_group(cache);
&start, &end, EXTENT_DIRTY);
if (ret)
break;
+
set_extent_dirty(copy, start, end, GFP_NOFS);
last = end + 1;
}
cond_resched();
}
+
return ret;
}
return ret;
}
+/*
+ * when we wait for progress in the block group caching, its because
+ * our allocation attempt failed at least once. So, we must sleep
+ * and let some progress happen before we try again.
+ *
+ * This function will sleep at least once waiting for new free space to
+ * show up, and then it will check the block group free space numbers
+ * for our min num_bytes. Another option is to have it go ahead
+ * and look in the rbtree for a free extent of a given size, but this
+ * is a good start.
+ */
+static noinline int
+wait_block_group_cache_progress(struct btrfs_block_group_cache *cache,
+ u64 num_bytes)
+{
+ DEFINE_WAIT(wait);
+
+ prepare_to_wait(&cache->caching_q, &wait, TASK_UNINTERRUPTIBLE);
+
+ if (block_group_cache_done(cache)) {
+ finish_wait(&cache->caching_q, &wait);
+ return 0;
+ }
+ schedule();
+ finish_wait(&cache->caching_q, &wait);
+
+ wait_event(cache->caching_q, block_group_cache_done(cache) ||
+ (cache->free_space >= num_bytes));
+ return 0;
+}
+
+enum btrfs_loop_type {
+ LOOP_CACHED_ONLY = 0,
+ LOOP_CACHING_NOWAIT = 1,
+ LOOP_CACHING_WAIT = 2,
+ LOOP_ALLOC_CHUNK = 3,
+ LOOP_NO_EMPTY_SIZE = 4,
+};
+
/*
* walks the btree of allocated extents and find a hole of a given size.
* The key ins is changed to record the hole:
struct btrfs_space_info *space_info;
int last_ptr_loop = 0;
int loop = 0;
+ bool found_uncached_bg = false;
WARN_ON(num_bytes < root->sectorsize);
btrfs_set_key_type(ins, BTRFS_EXTENT_ITEM_KEY);
search_start = max(search_start, first_logical_byte(root, 0));
search_start = max(search_start, hint_byte);
- if (!last_ptr) {
+ if (!last_ptr)
empty_cluster = 0;
- loop = 1;
- }
if (search_start == hint_byte) {
block_group = btrfs_lookup_block_group(root->fs_info,
search_start);
- if (block_group && block_group_bits(block_group, data)) {
+ /*
+ * we don't want to use the block group if it doesn't match our
+ * allocation bits, or if its not cached.
+ */
+ if (block_group && block_group_bits(block_group, data) &&
+ block_group_cache_done(block_group)) {
down_read(&space_info->groups_sem);
if (list_empty(&block_group->list) ||
block_group->ro) {
down_read(&space_info->groups_sem);
list_for_each_entry(block_group, &space_info->block_groups, list) {
u64 offset;
+ int cached;
atomic_inc(&block_group->count);
search_start = block_group->key.objectid;
have_block_group:
- if (unlikely(!block_group->cached)) {
- mutex_lock(&block_group->cache_mutex);
- ret = cache_block_group(root, block_group);
- mutex_unlock(&block_group->cache_mutex);
- if (ret) {
- btrfs_put_block_group(block_group);
- break;
+ if (unlikely(block_group->cached == BTRFS_CACHE_NO)) {
+ /*
+ * we want to start caching kthreads, but not too many
+ * right off the bat so we don't overwhelm the system,
+ * so only start them if there are less than 2 and we're
+ * in the initial allocation phase.
+ */
+ if (loop > LOOP_CACHING_NOWAIT ||
+ atomic_read(&space_info->caching_threads) < 2) {
+ ret = cache_block_group(block_group);
+ BUG_ON(ret);
}
}
+ cached = block_group_cache_done(block_group);
+ if (unlikely(!cached)) {
+ found_uncached_bg = true;
+
+ /* if we only want cached bgs, loop */
+ if (loop == LOOP_CACHED_ONLY)
+ goto loop;
+ }
+
if (unlikely(block_group->ro))
goto loop;
spin_unlock(&last_ptr->refill_lock);
goto checks;
}
+ } else if (!cached && loop > LOOP_CACHING_NOWAIT) {
+ spin_unlock(&last_ptr->refill_lock);
+
+ wait_block_group_cache_progress(block_group,
+ num_bytes + empty_cluster + empty_size);
+ goto have_block_group;
}
+
/*
* at this point we either didn't find a cluster
* or we weren't able to allocate a block from our
* cluster. Free the cluster we've been trying
* to use, and go to the next block group
*/
- if (loop < 2) {
+ if (loop < LOOP_NO_EMPTY_SIZE) {
btrfs_return_cluster_to_free_space(NULL,
last_ptr);
spin_unlock(&last_ptr->refill_lock);
offset = btrfs_find_space_for_alloc(block_group, search_start,
num_bytes, empty_size);
- if (!offset)
+ if (!offset && (cached || (!cached &&
+ loop == LOOP_CACHING_NOWAIT))) {
goto loop;
+ } else if (!offset && (!cached &&
+ loop > LOOP_CACHING_NOWAIT)) {
+ wait_block_group_cache_progress(block_group,
+ num_bytes + empty_size);
+ goto have_block_group;
+ }
checks:
search_start = stripe_align(root, offset);
-
/* move on to the next group */
if (search_start + num_bytes >= search_end) {
btrfs_add_free_space(block_group, offset, num_bytes);
}
up_read(&space_info->groups_sem);
- /* loop == 0, try to find a clustered alloc in every block group
- * loop == 1, try again after forcing a chunk allocation
- * loop == 2, set empty_size and empty_cluster to 0 and try again
+ /* LOOP_CACHED_ONLY, only search fully cached block groups
+ * LOOP_CACHING_NOWAIT, search partially cached block groups, but
+ * dont wait foR them to finish caching
+ * LOOP_CACHING_WAIT, search everything, and wait if our bg is caching
+ * LOOP_ALLOC_CHUNK, force a chunk allocation and try again
+ * LOOP_NO_EMPTY_SIZE, set empty_size and empty_cluster to 0 and try
+ * again
*/
- if (!ins->objectid && loop < 3 &&
- (empty_size || empty_cluster || allowed_chunk_alloc)) {
- if (loop >= 2) {
+ if (!ins->objectid && loop < LOOP_NO_EMPTY_SIZE &&
+ (found_uncached_bg || empty_size || empty_cluster ||
+ allowed_chunk_alloc)) {
+ if (found_uncached_bg) {
+ found_uncached_bg = false;
+ if (loop < LOOP_CACHING_WAIT) {
+ loop++;
+ goto search;
+ }
+ }
+
+ if (loop == LOOP_ALLOC_CHUNK) {
empty_size = 0;
empty_cluster = 0;
}
space_info->force_alloc = 1;
}
- if (loop < 3) {
+ if (loop < LOOP_NO_EMPTY_SIZE) {
loop++;
goto search;
}
num_bytes, data, 1);
goto again;
}
- if (ret) {
+ if (ret == -ENOSPC) {
struct btrfs_space_info *sinfo;
sinfo = __find_space_info(root->fs_info, data);
"wanted %llu\n", (unsigned long long)data,
(unsigned long long)num_bytes);
dump_space_info(sinfo, num_bytes);
- BUG();
}
return ret;
ret = __btrfs_reserve_extent(trans, root, num_bytes, min_alloc_size,
empty_size, hint_byte, search_end, ins,
data);
- update_reserved_extents(root, ins->objectid, ins->offset, 1);
+ if (!ret)
+ update_reserved_extents(root, ins->objectid, ins->offset, 1);
+
return ret;
}
struct btrfs_block_group_cache *block_group;
block_group = btrfs_lookup_block_group(root->fs_info, ins->objectid);
- mutex_lock(&block_group->cache_mutex);
- cache_block_group(root, block_group);
- mutex_unlock(&block_group->cache_mutex);
+ cache_block_group(block_group);
+ wait_event(block_group->caching_q,
+ block_group_cache_done(block_group));
ret = btrfs_remove_free_space(block_group, ins->objectid,
ins->offset);
ret = __btrfs_reserve_extent(trans, root, num_bytes, num_bytes,
empty_size, hint_byte, search_end,
ins, 0);
- BUG_ON(ret);
+ if (ret)
+ return ret;
if (root_objectid == BTRFS_TREE_RELOC_OBJECTID) {
if (parent == 0)
&info->block_group_cache_tree);
spin_unlock(&info->block_group_cache_lock);
- btrfs_remove_free_space_cache(block_group);
down_write(&block_group->space_info->groups_sem);
list_del(&block_group->list);
up_write(&block_group->space_info->groups_sem);
+ if (block_group->cached == BTRFS_CACHE_STARTED)
+ wait_event(block_group->caching_q,
+ block_group_cache_done(block_group));
+
+ btrfs_remove_free_space_cache(block_group);
+
WARN_ON(atomic_read(&block_group->count) != 1);
kfree(block_group);
atomic_set(&cache->count, 1);
spin_lock_init(&cache->lock);
spin_lock_init(&cache->tree_lock);
- mutex_init(&cache->cache_mutex);
+ cache->fs_info = info;
+ init_waitqueue_head(&cache->caching_q);
INIT_LIST_HEAD(&cache->list);
INIT_LIST_HEAD(&cache->cluster_list);
+
+ /*
+ * we only want to have 32k of ram per block group for keeping
+ * track of free space, and if we pass 1/2 of that we want to
+ * start converting things over to using bitmaps
+ */
+ cache->extents_thresh = ((1024 * 32) / 2) /
+ sizeof(struct btrfs_free_space);
+
read_extent_buffer(leaf, &cache->item,
btrfs_item_ptr_offset(leaf, path->slots[0]),
sizeof(cache->item));
key.objectid = found_key.objectid + found_key.offset;
btrfs_release_path(root, path);
cache->flags = btrfs_block_group_flags(&cache->item);
+ cache->sectorsize = root->sectorsize;
+
+ remove_sb_from_cache(root, cache);
+
+ /*
+ * check for two cases, either we are full, and therefore
+ * don't need to bother with the caching work since we won't
+ * find any space, or we are empty, and we can just add all
+ * the space in and be done with it. This saves us _alot_ of
+ * time, particularly in the full case.
+ */
+ if (found_key.offset == btrfs_block_group_used(&cache->item)) {
+ cache->cached = BTRFS_CACHE_FINISHED;
+ } else if (btrfs_block_group_used(&cache->item) == 0) {
+ cache->cached = BTRFS_CACHE_FINISHED;
+ add_new_free_space(cache, root->fs_info,
+ found_key.objectid,
+ found_key.objectid +
+ found_key.offset);
+ }
ret = update_space_info(info, cache->flags, found_key.offset,
btrfs_block_group_used(&cache->item),
cache->key.objectid = chunk_offset;
cache->key.offset = size;
cache->key.type = BTRFS_BLOCK_GROUP_ITEM_KEY;
+ cache->sectorsize = root->sectorsize;
+
+ /*
+ * we only want to have 32k of ram per block group for keeping track
+ * of free space, and if we pass 1/2 of that we want to start
+ * converting things over to using bitmaps
+ */
+ cache->extents_thresh = ((1024 * 32) / 2) /
+ sizeof(struct btrfs_free_space);
atomic_set(&cache->count, 1);
spin_lock_init(&cache->lock);
spin_lock_init(&cache->tree_lock);
- mutex_init(&cache->cache_mutex);
+ init_waitqueue_head(&cache->caching_q);
INIT_LIST_HEAD(&cache->list);
INIT_LIST_HEAD(&cache->cluster_list);
cache->flags = type;
btrfs_set_block_group_flags(&cache->item, type);
+ cache->cached = BTRFS_CACHE_FINISHED;
+ remove_sb_from_cache(root, cache);
+
+ add_new_free_space(cache, root->fs_info, chunk_offset,
+ chunk_offset + size);
+
ret = update_space_info(root->fs_info, cache->flags, size, bytes_used,
&cache->space_info);
BUG_ON(ret);
rb_erase(&block_group->cache_node,
&root->fs_info->block_group_cache_tree);
spin_unlock(&root->fs_info->block_group_cache_lock);
- btrfs_remove_free_space_cache(block_group);
+
down_write(&block_group->space_info->groups_sem);
/*
* we must use list_del_init so people can check to see if they
list_del_init(&block_group->list);
up_write(&block_group->space_info->groups_sem);
+ if (block_group->cached == BTRFS_CACHE_STARTED)
+ wait_event(block_group->caching_q,
+ block_group_cache_done(block_group));
+
+ btrfs_remove_free_space_cache(block_group);
+
spin_lock(&block_group->space_info->lock);
block_group->space_info->total_bytes -= block_group->key.offset;
block_group->space_info->bytes_readonly -= block_group->key.offset;
spin_unlock(&block_group->space_info->lock);
- block_group->space_info->full = 0;
+
+ btrfs_clear_space_info_full(root->fs_info);
btrfs_put_block_group(block_group);
btrfs_put_block_group(block_group);
* Boston, MA 021110-1307, USA.
*/
+#include <linux/pagemap.h>
#include <linux/sched.h>
+#include <linux/math64.h>
#include "ctree.h"
#include "free-space-cache.h"
#include "transaction.h"
-struct btrfs_free_space {
- struct rb_node bytes_index;
- struct rb_node offset_index;
- u64 offset;
- u64 bytes;
-};
+#define BITS_PER_BITMAP (PAGE_CACHE_SIZE * 8)
+#define MAX_CACHE_BYTES_PER_GIG (32 * 1024)
-static int tree_insert_offset(struct rb_root *root, u64 offset,
- struct rb_node *node)
+static inline unsigned long offset_to_bit(u64 bitmap_start, u64 sectorsize,
+ u64 offset)
{
- struct rb_node **p = &root->rb_node;
- struct rb_node *parent = NULL;
- struct btrfs_free_space *info;
+ BUG_ON(offset < bitmap_start);
+ offset -= bitmap_start;
+ return (unsigned long)(div64_u64(offset, sectorsize));
+}
- while (*p) {
- parent = *p;
- info = rb_entry(parent, struct btrfs_free_space, offset_index);
+static inline unsigned long bytes_to_bits(u64 bytes, u64 sectorsize)
+{
+ return (unsigned long)(div64_u64(bytes, sectorsize));
+}
- if (offset < info->offset)
- p = &(*p)->rb_left;
- else if (offset > info->offset)
- p = &(*p)->rb_right;
- else
- return -EEXIST;
- }
+static inline u64 offset_to_bitmap(struct btrfs_block_group_cache *block_group,
+ u64 offset)
+{
+ u64 bitmap_start;
+ u64 bytes_per_bitmap;
- rb_link_node(node, parent, p);
- rb_insert_color(node, root);
+ bytes_per_bitmap = BITS_PER_BITMAP * block_group->sectorsize;
+ bitmap_start = offset - block_group->key.objectid;
+ bitmap_start = div64_u64(bitmap_start, bytes_per_bitmap);
+ bitmap_start *= bytes_per_bitmap;
+ bitmap_start += block_group->key.objectid;
- return 0;
+ return bitmap_start;
}
-static int tree_insert_bytes(struct rb_root *root, u64 bytes,
- struct rb_node *node)
+static int tree_insert_offset(struct rb_root *root, u64 offset,
+ struct rb_node *node, int bitmap)
{
struct rb_node **p = &root->rb_node;
struct rb_node *parent = NULL;
while (*p) {
parent = *p;
- info = rb_entry(parent, struct btrfs_free_space, bytes_index);
+ info = rb_entry(parent, struct btrfs_free_space, offset_index);
- if (bytes < info->bytes)
+ if (offset < info->offset) {
p = &(*p)->rb_left;
- else
+ } else if (offset > info->offset) {
p = &(*p)->rb_right;
+ } else {
+ /*
+ * we could have a bitmap entry and an extent entry
+ * share the same offset. If this is the case, we want
+ * the extent entry to always be found first if we do a
+ * linear search through the tree, since we want to have
+ * the quickest allocation time, and allocating from an
+ * extent is faster than allocating from a bitmap. So
+ * if we're inserting a bitmap and we find an entry at
+ * this offset, we want to go right, or after this entry
+ * logically. If we are inserting an extent and we've
+ * found a bitmap, we want to go left, or before
+ * logically.
+ */
+ if (bitmap) {
+ WARN_ON(info->bitmap);
+ p = &(*p)->rb_right;
+ } else {
+ WARN_ON(!info->bitmap);
+ p = &(*p)->rb_left;
+ }
+ }
}
rb_link_node(node, parent, p);
/*
* searches the tree for the given offset.
*
- * fuzzy == 1: this is used for allocations where we are given a hint of where
- * to look for free space. Because the hint may not be completely on an offset
- * mark, or the hint may no longer point to free space we need to fudge our
- * results a bit. So we look for free space starting at or after offset with at
- * least bytes size. We prefer to find as close to the given offset as we can.
- * Also if the offset is within a free space range, then we will return the free
- * space that contains the given offset, which means we can return a free space
- * chunk with an offset before the provided offset.
- *
- * fuzzy == 0: this is just a normal tree search. Give us the free space that
- * starts at the given offset which is at least bytes size, and if its not there
- * return NULL.
+ * fuzzy - If this is set, then we are trying to make an allocation, and we just
+ * want a section that has at least bytes size and comes at or after the given
+ * offset.
*/
-static struct btrfs_free_space *tree_search_offset(struct rb_root *root,
- u64 offset, u64 bytes,
- int fuzzy)
+static struct btrfs_free_space *
+tree_search_offset(struct btrfs_block_group_cache *block_group,
+ u64 offset, int bitmap_only, int fuzzy)
{
- struct rb_node *n = root->rb_node;
- struct btrfs_free_space *entry, *ret = NULL;
+ struct rb_node *n = block_group->free_space_offset.rb_node;
+ struct btrfs_free_space *entry, *prev = NULL;
+
+ /* find entry that is closest to the 'offset' */
+ while (1) {
+ if (!n) {
+ entry = NULL;
+ break;
+ }
- while (n) {
entry = rb_entry(n, struct btrfs_free_space, offset_index);
+ prev = entry;
- if (offset < entry->offset) {
- if (fuzzy &&
- (!ret || entry->offset < ret->offset) &&
- (bytes <= entry->bytes))
- ret = entry;
+ if (offset < entry->offset)
n = n->rb_left;
- } else if (offset > entry->offset) {
- if (fuzzy &&
- (entry->offset + entry->bytes - 1) >= offset &&
- bytes <= entry->bytes) {
- ret = entry;
- break;
- }
+ else if (offset > entry->offset)
n = n->rb_right;
- } else {
- if (bytes > entry->bytes) {
- n = n->rb_right;
- continue;
- }
- ret = entry;
+ else
break;
- }
}
- return ret;
-}
+ if (bitmap_only) {
+ if (!entry)
+ return NULL;
+ if (entry->bitmap)
+ return entry;
-/*
- * return a chunk at least bytes size, as close to offset that we can get.
- */
-static struct btrfs_free_space *tree_search_bytes(struct rb_root *root,
- u64 offset, u64 bytes)
-{
- struct rb_node *n = root->rb_node;
- struct btrfs_free_space *entry, *ret = NULL;
-
- while (n) {
- entry = rb_entry(n, struct btrfs_free_space, bytes_index);
+ /*
+ * bitmap entry and extent entry may share same offset,
+ * in that case, bitmap entry comes after extent entry.
+ */
+ n = rb_next(n);
+ if (!n)
+ return NULL;
+ entry = rb_entry(n, struct btrfs_free_space, offset_index);
+ if (entry->offset != offset)
+ return NULL;
- if (bytes < entry->bytes) {
+ WARN_ON(!entry->bitmap);
+ return entry;
+ } else if (entry) {
+ if (entry->bitmap) {
/*
- * We prefer to get a hole size as close to the size we
- * are asking for so we don't take small slivers out of
- * huge holes, but we also want to get as close to the
- * offset as possible so we don't have a whole lot of
- * fragmentation.
+ * if previous extent entry covers the offset,
+ * we should return it instead of the bitmap entry
*/
- if (offset <= entry->offset) {
- if (!ret)
- ret = entry;
- else if (entry->bytes < ret->bytes)
- ret = entry;
- else if (entry->offset < ret->offset)
- ret = entry;
+ n = &entry->offset_index;
+ while (1) {
+ n = rb_prev(n);
+ if (!n)
+ break;
+ prev = rb_entry(n, struct btrfs_free_space,
+ offset_index);
+ if (!prev->bitmap) {
+ if (prev->offset + prev->bytes > offset)
+ entry = prev;
+ break;
+ }
}
- n = n->rb_left;
- } else if (bytes > entry->bytes) {
- n = n->rb_right;
+ }
+ return entry;
+ }
+
+ if (!prev)
+ return NULL;
+
+ /* find last entry before the 'offset' */
+ entry = prev;
+ if (entry->offset > offset) {
+ n = rb_prev(&entry->offset_index);
+ if (n) {
+ entry = rb_entry(n, struct btrfs_free_space,
+ offset_index);
+ BUG_ON(entry->offset > offset);
} else {
- /*
- * Ok we may have multiple chunks of the wanted size,
- * so we don't want to take the first one we find, we
- * want to take the one closest to our given offset, so
- * keep searching just in case theres a better match.
- */
- n = n->rb_right;
- if (offset > entry->offset)
- continue;
- else if (!ret || entry->offset < ret->offset)
- ret = entry;
+ if (fuzzy)
+ return entry;
+ else
+ return NULL;
}
}
- return ret;
+ if (entry->bitmap) {
+ n = &entry->offset_index;
+ while (1) {
+ n = rb_prev(n);
+ if (!n)
+ break;
+ prev = rb_entry(n, struct btrfs_free_space,
+ offset_index);
+ if (!prev->bitmap) {
+ if (prev->offset + prev->bytes > offset)
+ return prev;
+ break;
+ }
+ }
+ if (entry->offset + BITS_PER_BITMAP *
+ block_group->sectorsize > offset)
+ return entry;
+ } else if (entry->offset + entry->bytes > offset)
+ return entry;
+
+ if (!fuzzy)
+ return NULL;
+
+ while (1) {
+ if (entry->bitmap) {
+ if (entry->offset + BITS_PER_BITMAP *
+ block_group->sectorsize > offset)
+ break;
+ } else {
+ if (entry->offset + entry->bytes > offset)
+ break;
+ }
+
+ n = rb_next(&entry->offset_index);
+ if (!n)
+ return NULL;
+ entry = rb_entry(n, struct btrfs_free_space, offset_index);
+ }
+ return entry;
}
static void unlink_free_space(struct btrfs_block_group_cache *block_group,
struct btrfs_free_space *info)
{
rb_erase(&info->offset_index, &block_group->free_space_offset);
- rb_erase(&info->bytes_index, &block_group->free_space_bytes);
+ block_group->free_extents--;
+ block_group->free_space -= info->bytes;
}
static int link_free_space(struct btrfs_block_group_cache *block_group,
{
int ret = 0;
-
- BUG_ON(!info->bytes);
+ BUG_ON(!info->bitmap && !info->bytes);
ret = tree_insert_offset(&block_group->free_space_offset, info->offset,
- &info->offset_index);
+ &info->offset_index, (info->bitmap != NULL));
if (ret)
return ret;
- ret = tree_insert_bytes(&block_group->free_space_bytes, info->bytes,
- &info->bytes_index);
- if (ret)
- return ret;
+ block_group->free_space += info->bytes;
+ block_group->free_extents++;
+ return ret;
+}
+
+static void recalculate_thresholds(struct btrfs_block_group_cache *block_group)
+{
+ u64 max_bytes, possible_bytes;
+
+ /*
+ * The goal is to keep the total amount of memory used per 1gb of space
+ * at or below 32k, so we need to adjust how much memory we allow to be
+ * used by extent based free space tracking
+ */
+ max_bytes = MAX_CACHE_BYTES_PER_GIG *
+ (div64_u64(block_group->key.offset, 1024 * 1024 * 1024));
+
+ possible_bytes = (block_group->total_bitmaps * PAGE_CACHE_SIZE) +
+ (sizeof(struct btrfs_free_space) *
+ block_group->extents_thresh);
+
+ if (possible_bytes > max_bytes) {
+ int extent_bytes = max_bytes -
+ (block_group->total_bitmaps * PAGE_CACHE_SIZE);
+
+ if (extent_bytes <= 0) {
+ block_group->extents_thresh = 0;
+ return;
+ }
+
+ block_group->extents_thresh = extent_bytes /
+ (sizeof(struct btrfs_free_space));
+ }
+}
+
+static void bitmap_clear_bits(struct btrfs_block_group_cache *block_group,
+ struct btrfs_free_space *info, u64 offset,
+ u64 bytes)
+{
+ unsigned long start, end;
+ unsigned long i;
+
+ start = offset_to_bit(info->offset, block_group->sectorsize, offset);
+ end = start + bytes_to_bits(bytes, block_group->sectorsize);
+ BUG_ON(end > BITS_PER_BITMAP);
+
+ for (i = start; i < end; i++)
+ clear_bit(i, info->bitmap);
+
+ info->bytes -= bytes;
+ block_group->free_space -= bytes;
+}
+
+static void bitmap_set_bits(struct btrfs_block_group_cache *block_group,
+ struct btrfs_free_space *info, u64 offset,
+ u64 bytes)
+{
+ unsigned long start, end;
+ unsigned long i;
+
+ start = offset_to_bit(info->offset, block_group->sectorsize, offset);
+ end = start + bytes_to_bits(bytes, block_group->sectorsize);
+ BUG_ON(end > BITS_PER_BITMAP);
+
+ for (i = start; i < end; i++)
+ set_bit(i, info->bitmap);
+
+ info->bytes += bytes;
+ block_group->free_space += bytes;
+}
+
+static int search_bitmap(struct btrfs_block_group_cache *block_group,
+ struct btrfs_free_space *bitmap_info, u64 *offset,
+ u64 *bytes)
+{
+ unsigned long found_bits = 0;
+ unsigned long bits, i;
+ unsigned long next_zero;
+
+ i = offset_to_bit(bitmap_info->offset, block_group->sectorsize,
+ max_t(u64, *offset, bitmap_info->offset));
+ bits = bytes_to_bits(*bytes, block_group->sectorsize);
+
+ for (i = find_next_bit(bitmap_info->bitmap, BITS_PER_BITMAP, i);
+ i < BITS_PER_BITMAP;
+ i = find_next_bit(bitmap_info->bitmap, BITS_PER_BITMAP, i + 1)) {
+ next_zero = find_next_zero_bit(bitmap_info->bitmap,
+ BITS_PER_BITMAP, i);
+ if ((next_zero - i) >= bits) {
+ found_bits = next_zero - i;
+ break;
+ }
+ i = next_zero;
+ }
+
+ if (found_bits) {
+ *offset = (u64)(i * block_group->sectorsize) +
+ bitmap_info->offset;
+ *bytes = (u64)(found_bits) * block_group->sectorsize;
+ return 0;
+ }
+
+ return -1;
+}
+
+static struct btrfs_free_space *find_free_space(struct btrfs_block_group_cache
+ *block_group, u64 *offset,
+ u64 *bytes, int debug)
+{
+ struct btrfs_free_space *entry;
+ struct rb_node *node;
+ int ret;
+
+ if (!block_group->free_space_offset.rb_node)
+ return NULL;
+
+ entry = tree_search_offset(block_group,
+ offset_to_bitmap(block_group, *offset),
+ 0, 1);
+ if (!entry)
+ return NULL;
+
+ for (node = &entry->offset_index; node; node = rb_next(node)) {
+ entry = rb_entry(node, struct btrfs_free_space, offset_index);
+ if (entry->bytes < *bytes)
+ continue;
+
+ if (entry->bitmap) {
+ ret = search_bitmap(block_group, entry, offset, bytes);
+ if (!ret)
+ return entry;
+ continue;
+ }
+
+ *offset = entry->offset;
+ *bytes = entry->bytes;
+ return entry;
+ }
+
+ return NULL;
+}
+
+static void add_new_bitmap(struct btrfs_block_group_cache *block_group,
+ struct btrfs_free_space *info, u64 offset)
+{
+ u64 bytes_per_bg = BITS_PER_BITMAP * block_group->sectorsize;
+ int max_bitmaps = (int)div64_u64(block_group->key.offset +
+ bytes_per_bg - 1, bytes_per_bg);
+ BUG_ON(block_group->total_bitmaps >= max_bitmaps);
+
+ info->offset = offset_to_bitmap(block_group, offset);
+ link_free_space(block_group, info);
+ block_group->total_bitmaps++;
+
+ recalculate_thresholds(block_group);
+}
+
+static noinline int remove_from_bitmap(struct btrfs_block_group_cache *block_group,
+ struct btrfs_free_space *bitmap_info,
+ u64 *offset, u64 *bytes)
+{
+ u64 end;
+ u64 search_start, search_bytes;
+ int ret;
+
+again:
+ end = bitmap_info->offset +
+ (u64)(BITS_PER_BITMAP * block_group->sectorsize) - 1;
+
+ /*
+ * XXX - this can go away after a few releases.
+ *
+ * since the only user of btrfs_remove_free_space is the tree logging
+ * stuff, and the only way to test that is under crash conditions, we
+ * want to have this debug stuff here just in case somethings not
+ * working. Search the bitmap for the space we are trying to use to
+ * make sure its actually there. If its not there then we need to stop
+ * because something has gone wrong.
+ */
+ search_start = *offset;
+ search_bytes = *bytes;
+ ret = search_bitmap(block_group, bitmap_info, &search_start,
+ &search_bytes);
+ BUG_ON(ret < 0 || search_start != *offset);
+
+ if (*offset > bitmap_info->offset && *offset + *bytes > end) {
+ bitmap_clear_bits(block_group, bitmap_info, *offset,
+ end - *offset + 1);
+ *bytes -= end - *offset + 1;
+ *offset = end + 1;
+ } else if (*offset >= bitmap_info->offset && *offset + *bytes <= end) {
+ bitmap_clear_bits(block_group, bitmap_info, *offset, *bytes);
+ *bytes = 0;
+ }
+
+ if (*bytes) {
+ struct rb_node *next = rb_next(&bitmap_info->offset_index);
+ if (!bitmap_info->bytes) {
+ unlink_free_space(block_group, bitmap_info);
+ kfree(bitmap_info->bitmap);
+ kfree(bitmap_info);
+ block_group->total_bitmaps--;
+ recalculate_thresholds(block_group);
+ }
+
+ /*
+ * no entry after this bitmap, but we still have bytes to
+ * remove, so something has gone wrong.
+ */
+ if (!next)
+ return -EINVAL;
+
+ bitmap_info = rb_entry(next, struct btrfs_free_space,
+ offset_index);
+
+ /*
+ * if the next entry isn't a bitmap we need to return to let the
+ * extent stuff do its work.
+ */
+ if (!bitmap_info->bitmap)
+ return -EAGAIN;
+
+ /*
+ * Ok the next item is a bitmap, but it may not actually hold
+ * the information for the rest of this free space stuff, so
+ * look for it, and if we don't find it return so we can try
+ * everything over again.
+ */
+ search_start = *offset;
+ search_bytes = *bytes;
+ ret = search_bitmap(block_group, bitmap_info, &search_start,
+ &search_bytes);
+ if (ret < 0 || search_start != *offset)
+ return -EAGAIN;
+
+ goto again;
+ } else if (!bitmap_info->bytes) {
+ unlink_free_space(block_group, bitmap_info);
+ kfree(bitmap_info->bitmap);
+ kfree(bitmap_info);
+ block_group->total_bitmaps--;
+ recalculate_thresholds(block_group);
+ }
+
+ return 0;
+}
+
+static int insert_into_bitmap(struct btrfs_block_group_cache *block_group,
+ struct btrfs_free_space *info)
+{
+ struct btrfs_free_space *bitmap_info;
+ int added = 0;
+ u64 bytes, offset, end;
+ int ret;
+
+ /*
+ * If we are below the extents threshold then we can add this as an
+ * extent, and don't have to deal with the bitmap
+ */
+ if (block_group->free_extents < block_group->extents_thresh &&
+ info->bytes > block_group->sectorsize * 4)
+ return 0;
+
+ /*
+ * some block groups are so tiny they can't be enveloped by a bitmap, so
+ * don't even bother to create a bitmap for this
+ */
+ if (BITS_PER_BITMAP * block_group->sectorsize >
+ block_group->key.offset)
+ return 0;
+
+ bytes = info->bytes;
+ offset = info->offset;
+
+again:
+ bitmap_info = tree_search_offset(block_group,
+ offset_to_bitmap(block_group, offset),
+ 1, 0);
+ if (!bitmap_info) {
+ BUG_ON(added);
+ goto new_bitmap;
+ }
+
+ end = bitmap_info->offset +
+ (u64)(BITS_PER_BITMAP * block_group->sectorsize);
+
+ if (offset >= bitmap_info->offset && offset + bytes > end) {
+ bitmap_set_bits(block_group, bitmap_info, offset,
+ end - offset);
+ bytes -= end - offset;
+ offset = end;
+ added = 0;
+ } else if (offset >= bitmap_info->offset && offset + bytes <= end) {
+ bitmap_set_bits(block_group, bitmap_info, offset, bytes);
+ bytes = 0;
+ } else {
+ BUG();
+ }
+
+ if (!bytes) {
+ ret = 1;
+ goto out;
+ } else
+ goto again;
+
+new_bitmap:
+ if (info && info->bitmap) {
+ add_new_bitmap(block_group, info, offset);
+ added = 1;
+ info = NULL;
+ goto again;
+ } else {
+ spin_unlock(&block_group->tree_lock);
+
+ /* no pre-allocated info, allocate a new one */
+ if (!info) {
+ info = kzalloc(sizeof(struct btrfs_free_space),
+ GFP_NOFS);
+ if (!info) {
+ spin_lock(&block_group->tree_lock);
+ ret = -ENOMEM;
+ goto out;
+ }
+ }
+
+ /* allocate the bitmap */
+ info->bitmap = kzalloc(PAGE_CACHE_SIZE, GFP_NOFS);
+ spin_lock(&block_group->tree_lock);
+ if (!info->bitmap) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ goto again;
+ }
+
+out:
+ if (info) {
+ if (info->bitmap)
+ kfree(info->bitmap);
+ kfree(info);
+ }
return ret;
}
int btrfs_add_free_space(struct btrfs_block_group_cache *block_group,
u64 offset, u64 bytes)
{
- struct btrfs_free_space *right_info;
- struct btrfs_free_space *left_info;
+ struct btrfs_free_space *right_info = NULL;
+ struct btrfs_free_space *left_info = NULL;
struct btrfs_free_space *info = NULL;
int ret = 0;
* are adding, if there is remove that struct and add a new one to
* cover the entire range
*/
- right_info = tree_search_offset(&block_group->free_space_offset,
- offset+bytes, 0, 0);
- left_info = tree_search_offset(&block_group->free_space_offset,
- offset-1, 0, 1);
+ right_info = tree_search_offset(block_group, offset + bytes, 0, 0);
+ if (right_info && rb_prev(&right_info->offset_index))
+ left_info = rb_entry(rb_prev(&right_info->offset_index),
+ struct btrfs_free_space, offset_index);
+ else
+ left_info = tree_search_offset(block_group, offset - 1, 0, 0);
+
+ /*
+ * If there was no extent directly to the left or right of this new
+ * extent then we know we're going to have to allocate a new extent, so
+ * before we do that see if we need to drop this into a bitmap
+ */
+ if ((!left_info || left_info->bitmap) &&
+ (!right_info || right_info->bitmap)) {
+ ret = insert_into_bitmap(block_group, info);
+
+ if (ret < 0) {
+ goto out;
+ } else if (ret) {
+ ret = 0;
+ goto out;
+ }
+ }
- if (right_info) {
+ if (right_info && !right_info->bitmap) {
unlink_free_space(block_group, right_info);
info->bytes += right_info->bytes;
kfree(right_info);
}
- if (left_info && left_info->offset + left_info->bytes == offset) {
+ if (left_info && !left_info->bitmap &&
+ left_info->offset + left_info->bytes == offset) {
unlink_free_space(block_group, left_info);
info->offset = left_info->offset;
info->bytes += left_info->bytes;
ret = link_free_space(block_group, info);
if (ret)
kfree(info);
-
+out:
spin_unlock(&block_group->tree_lock);
if (ret) {
- printk(KERN_ERR "btrfs: unable to add free space :%d\n", ret);
+ printk(KERN_CRIT "btrfs: unable to add free space :%d\n", ret);
BUG_ON(ret == -EEXIST);
}
u64 offset, u64 bytes)
{
struct btrfs_free_space *info;
+ struct btrfs_free_space *next_info = NULL;
int ret = 0;
spin_lock(&block_group->tree_lock);
- info = tree_search_offset(&block_group->free_space_offset, offset, 0,
- 1);
- if (info && info->offset == offset) {
- if (info->bytes < bytes) {
- printk(KERN_ERR "Found free space at %llu, size %llu,"
- "trying to use %llu\n",
- (unsigned long long)info->offset,
- (unsigned long long)info->bytes,
- (unsigned long long)bytes);
+again:
+ info = tree_search_offset(block_group, offset, 0, 0);
+ if (!info) {
+ /*
+ * oops didn't find an extent that matched the space we wanted
+ * to remove, look for a bitmap instead
+ */
+ info = tree_search_offset(block_group,
+ offset_to_bitmap(block_group, offset),
+ 1, 0);
+ if (!info) {
+ WARN_ON(1);
+ goto out_lock;
+ }
+ }
+
+ if (info->bytes < bytes && rb_next(&info->offset_index)) {
+ u64 end;
+ next_info = rb_entry(rb_next(&info->offset_index),
+ struct btrfs_free_space,
+ offset_index);
+
+ if (next_info->bitmap)
+ end = next_info->offset + BITS_PER_BITMAP *
+ block_group->sectorsize - 1;
+ else
+ end = next_info->offset + next_info->bytes;
+
+ if (next_info->bytes < bytes ||
+ next_info->offset > offset || offset > end) {
+ printk(KERN_CRIT "Found free space at %llu, size %llu,"
+ " trying to use %llu\n",
+ (unsigned long long)info->offset,
+ (unsigned long long)info->bytes,
+ (unsigned long long)bytes);
WARN_ON(1);
ret = -EINVAL;
- spin_unlock(&block_group->tree_lock);
- goto out;
+ goto out_lock;
}
- unlink_free_space(block_group, info);
- if (info->bytes == bytes) {
- kfree(info);
- spin_unlock(&block_group->tree_lock);
- goto out;
+ info = next_info;
+ }
+
+ if (info->bytes == bytes) {
+ unlink_free_space(block_group, info);
+ if (info->bitmap) {
+ kfree(info->bitmap);
+ block_group->total_bitmaps--;
}
+ kfree(info);
+ goto out_lock;
+ }
+ if (!info->bitmap && info->offset == offset) {
+ unlink_free_space(block_group, info);
info->offset += bytes;
info->bytes -= bytes;
+ link_free_space(block_group, info);
+ goto out_lock;
+ }
- ret = link_free_space(block_group, info);
- spin_unlock(&block_group->tree_lock);
- BUG_ON(ret);
- } else if (info && info->offset < offset &&
- info->offset + info->bytes >= offset + bytes) {
+ if (!info->bitmap && info->offset <= offset &&
+ info->offset + info->bytes >= offset + bytes) {
u64 old_start = info->offset;
/*
* we're freeing space in the middle of the info,
info->offset = offset + bytes;
info->bytes = old_end - info->offset;
ret = link_free_space(block_group, info);
- BUG_ON(ret);
+ WARN_ON(ret);
+ if (ret)
+ goto out_lock;
} else {
/* the hole we're creating ends at the end
* of the info struct, just free the info
kfree(info);
}
spin_unlock(&block_group->tree_lock);
- /* step two, insert a new info struct to cover anything
- * before the hole
+
+ /* step two, insert a new info struct to cover
+ * anything before the hole
*/
ret = btrfs_add_free_space(block_group, old_start,
offset - old_start);
- BUG_ON(ret);
- } else {
- spin_unlock(&block_group->tree_lock);
- if (!info) {
- printk(KERN_ERR "couldn't find space %llu to free\n",
- (unsigned long long)offset);
- printk(KERN_ERR "cached is %d, offset %llu bytes %llu\n",
- block_group->cached,
- (unsigned long long)block_group->key.objectid,
- (unsigned long long)block_group->key.offset);
- btrfs_dump_free_space(block_group, bytes);
- } else if (info) {
- printk(KERN_ERR "hmm, found offset=%llu bytes=%llu, "
- "but wanted offset=%llu bytes=%llu\n",
- (unsigned long long)info->offset,
- (unsigned long long)info->bytes,
- (unsigned long long)offset,
- (unsigned long long)bytes);
- }
- WARN_ON(1);
+ WARN_ON(ret);
+ goto out;
}
+
+ ret = remove_from_bitmap(block_group, info, &offset, &bytes);
+ if (ret == -EAGAIN)
+ goto again;
+ BUG_ON(ret);
+out_lock:
+ spin_unlock(&block_group->tree_lock);
out:
return ret;
}
info = rb_entry(n, struct btrfs_free_space, offset_index);
if (info->bytes >= bytes)
count++;
- printk(KERN_ERR "entry offset %llu, bytes %llu\n",
+ printk(KERN_CRIT "entry offset %llu, bytes %llu, bitmap %s\n",
(unsigned long long)info->offset,
- (unsigned long long)info->bytes);
+ (unsigned long long)info->bytes,
+ (info->bitmap) ? "yes" : "no");
}
+ printk(KERN_INFO "block group has cluster?: %s\n",
+ list_empty(&block_group->cluster_list) ? "no" : "yes");
printk(KERN_INFO "%d blocks of free space at or bigger than bytes is"
"\n", count);
}
{
struct btrfs_free_space *entry;
struct rb_node *node;
+ bool bitmap;
spin_lock(&cluster->lock);
if (cluster->block_group != block_group)
goto out;
+ bitmap = cluster->points_to_bitmap;
+ cluster->block_group = NULL;
cluster->window_start = 0;
+ list_del_init(&cluster->block_group_list);
+ cluster->points_to_bitmap = false;
+
+ if (bitmap)
+ goto out;
+
node = rb_first(&cluster->root);
- while(node) {
+ while (node) {
entry = rb_entry(node, struct btrfs_free_space, offset_index);
node = rb_next(&entry->offset_index);
rb_erase(&entry->offset_index, &cluster->root);
- link_free_space(block_group, entry);
+ BUG_ON(entry->bitmap);
+ tree_insert_offset(&block_group->free_space_offset,
+ entry->offset, &entry->offset_index, 0);
}
- list_del_init(&cluster->block_group_list);
-
- btrfs_put_block_group(cluster->block_group);
- cluster->block_group = NULL;
cluster->root.rb_node = NULL;
+
out:
spin_unlock(&cluster->lock);
+ btrfs_put_block_group(block_group);
return 0;
}
struct btrfs_free_space *info;
struct rb_node *node;
struct btrfs_free_cluster *cluster;
- struct btrfs_free_cluster *safe;
+ struct list_head *head;
spin_lock(&block_group->tree_lock);
-
- list_for_each_entry_safe(cluster, safe, &block_group->cluster_list,
- block_group_list) {
+ while ((head = block_group->cluster_list.next) !=
+ &block_group->cluster_list) {
+ cluster = list_entry(head, struct btrfs_free_cluster,
+ block_group_list);
WARN_ON(cluster->block_group != block_group);
__btrfs_return_cluster_to_free_space(block_group, cluster);
+ if (need_resched()) {
+ spin_unlock(&block_group->tree_lock);
+ cond_resched();
+ spin_lock(&block_group->tree_lock);
+ }
}
- while ((node = rb_last(&block_group->free_space_bytes)) != NULL) {
- info = rb_entry(node, struct btrfs_free_space, bytes_index);
+ while ((node = rb_last(&block_group->free_space_offset)) != NULL) {
+ info = rb_entry(node, struct btrfs_free_space, offset_index);
unlink_free_space(block_group, info);
+ if (info->bitmap)
+ kfree(info->bitmap);
kfree(info);
if (need_resched()) {
spin_unlock(&block_group->tree_lock);
spin_lock(&block_group->tree_lock);
}
}
+
spin_unlock(&block_group->tree_lock);
}
u64 offset, u64 bytes, u64 empty_size)
{
struct btrfs_free_space *entry = NULL;
+ u64 bytes_search = bytes + empty_size;
u64 ret = 0;
spin_lock(&block_group->tree_lock);
- entry = tree_search_offset(&block_group->free_space_offset, offset,
- bytes + empty_size, 1);
+ entry = find_free_space(block_group, &offset, &bytes_search, 0);
if (!entry)
- entry = tree_search_bytes(&block_group->free_space_bytes,
- offset, bytes + empty_size);
- if (entry) {
+ goto out;
+
+ ret = offset;
+ if (entry->bitmap) {
+ bitmap_clear_bits(block_group, entry, offset, bytes);
+ if (!entry->bytes) {
+ unlink_free_space(block_group, entry);
+ kfree(entry->bitmap);
+ kfree(entry);
+ block_group->total_bitmaps--;
+ recalculate_thresholds(block_group);
+ }
+ } else {
unlink_free_space(block_group, entry);
- ret = entry->offset;
entry->offset += bytes;
entry->bytes -= bytes;
-
if (!entry->bytes)
kfree(entry);
else
link_free_space(block_group, entry);
}
+
+out:
spin_unlock(&block_group->tree_lock);
return ret;
return ret;
}
+static u64 btrfs_alloc_from_bitmap(struct btrfs_block_group_cache *block_group,
+ struct btrfs_free_cluster *cluster,
+ u64 bytes, u64 min_start)
+{
+ struct btrfs_free_space *entry;
+ int err;
+ u64 search_start = cluster->window_start;
+ u64 search_bytes = bytes;
+ u64 ret = 0;
+
+ spin_lock(&block_group->tree_lock);
+ spin_lock(&cluster->lock);
+
+ if (!cluster->points_to_bitmap)
+ goto out;
+
+ if (cluster->block_group != block_group)
+ goto out;
+
+ /*
+ * search_start is the beginning of the bitmap, but at some point it may
+ * be a good idea to point to the actual start of the free area in the
+ * bitmap, so do the offset_to_bitmap trick anyway, and set bitmap_only
+ * to 1 to make sure we get the bitmap entry
+ */
+ entry = tree_search_offset(block_group,
+ offset_to_bitmap(block_group, search_start),
+ 1, 0);
+ if (!entry || !entry->bitmap)
+ goto out;
+
+ search_start = min_start;
+ search_bytes = bytes;
+
+ err = search_bitmap(block_group, entry, &search_start,
+ &search_bytes);
+ if (err)
+ goto out;
+
+ ret = search_start;
+ bitmap_clear_bits(block_group, entry, ret, bytes);
+out:
+ spin_unlock(&cluster->lock);
+ spin_unlock(&block_group->tree_lock);
+
+ return ret;
+}
+
/*
* given a cluster, try to allocate 'bytes' from it, returns 0
* if it couldn't find anything suitably large, or a logical disk offset
struct rb_node *node;
u64 ret = 0;
+ if (cluster->points_to_bitmap)
+ return btrfs_alloc_from_bitmap(block_group, cluster, bytes,
+ min_start);
+
spin_lock(&cluster->lock);
if (bytes > cluster->max_size)
goto out;
}
out:
spin_unlock(&cluster->lock);
+
return ret;
}
+static int btrfs_bitmap_cluster(struct btrfs_block_group_cache *block_group,
+ struct btrfs_free_space *entry,
+ struct btrfs_free_cluster *cluster,
+ u64 offset, u64 bytes, u64 min_bytes)
+{
+ unsigned long next_zero;
+ unsigned long i;
+ unsigned long search_bits;
+ unsigned long total_bits;
+ unsigned long found_bits;
+ unsigned long start = 0;
+ unsigned long total_found = 0;
+ bool found = false;
+
+ i = offset_to_bit(entry->offset, block_group->sectorsize,
+ max_t(u64, offset, entry->offset));
+ search_bits = bytes_to_bits(min_bytes, block_group->sectorsize);
+ total_bits = bytes_to_bits(bytes, block_group->sectorsize);
+
+again:
+ found_bits = 0;
+ for (i = find_next_bit(entry->bitmap, BITS_PER_BITMAP, i);
+ i < BITS_PER_BITMAP;
+ i = find_next_bit(entry->bitmap, BITS_PER_BITMAP, i + 1)) {
+ next_zero = find_next_zero_bit(entry->bitmap,
+ BITS_PER_BITMAP, i);
+ if (next_zero - i >= search_bits) {
+ found_bits = next_zero - i;
+ break;
+ }
+ i = next_zero;
+ }
+
+ if (!found_bits)
+ return -1;
+
+ if (!found) {
+ start = i;
+ found = true;
+ }
+
+ total_found += found_bits;
+
+ if (cluster->max_size < found_bits * block_group->sectorsize)
+ cluster->max_size = found_bits * block_group->sectorsize;
+
+ if (total_found < total_bits) {
+ i = find_next_bit(entry->bitmap, BITS_PER_BITMAP, next_zero);
+ if (i - start > total_bits * 2) {
+ total_found = 0;
+ cluster->max_size = 0;
+ found = false;
+ }
+ goto again;
+ }
+
+ cluster->window_start = start * block_group->sectorsize +
+ entry->offset;
+ cluster->points_to_bitmap = true;
+
+ return 0;
+}
+
/*
* here we try to find a cluster of blocks in a block group. The goal
* is to find at least bytes free and up to empty_size + bytes free.
struct btrfs_free_space *entry = NULL;
struct rb_node *node;
struct btrfs_free_space *next;
- struct btrfs_free_space *last;
+ struct btrfs_free_space *last = NULL;
u64 min_bytes;
u64 window_start;
u64 window_free;
u64 max_extent = 0;
- int total_retries = 0;
+ bool found_bitmap = false;
int ret;
/* for metadata, allow allocates with more holes */
goto out;
}
again:
- min_bytes = min(min_bytes, bytes + empty_size);
- entry = tree_search_bytes(&block_group->free_space_bytes,
- offset, min_bytes);
+ entry = tree_search_offset(block_group, offset, found_bitmap, 1);
if (!entry) {
ret = -ENOSPC;
goto out;
}
+
+ /*
+ * If found_bitmap is true, we exhausted our search for extent entries,
+ * and we just want to search all of the bitmaps that we can find, and
+ * ignore any extent entries we find.
+ */
+ while (entry->bitmap || found_bitmap ||
+ (!entry->bitmap && entry->bytes < min_bytes)) {
+ struct rb_node *node = rb_next(&entry->offset_index);
+
+ if (entry->bitmap && entry->bytes > bytes + empty_size) {
+ ret = btrfs_bitmap_cluster(block_group, entry, cluster,
+ offset, bytes + empty_size,
+ min_bytes);
+ if (!ret)
+ goto got_it;
+ }
+
+ if (!node) {
+ ret = -ENOSPC;
+ goto out;
+ }
+ entry = rb_entry(node, struct btrfs_free_space, offset_index);
+ }
+
+ /*
+ * We already searched all the extent entries from the passed in offset
+ * to the end and didn't find enough space for the cluster, and we also
+ * didn't find any bitmaps that met our criteria, just go ahead and exit
+ */
+ if (found_bitmap) {
+ ret = -ENOSPC;
+ goto out;
+ }
+
+ cluster->points_to_bitmap = false;
window_start = entry->offset;
window_free = entry->bytes;
last = entry;
max_extent = entry->bytes;
- while(1) {
+ while (1) {
/* out window is just right, lets fill it */
if (window_free >= bytes + empty_size)
break;
node = rb_next(&last->offset_index);
if (!node) {
+ if (found_bitmap)
+ goto again;
ret = -ENOSPC;
goto out;
}
next = rb_entry(node, struct btrfs_free_space, offset_index);
+ /*
+ * we found a bitmap, so if this search doesn't result in a
+ * cluster, we know to go and search again for the bitmaps and
+ * start looking for space there
+ */
+ if (next->bitmap) {
+ if (!found_bitmap)
+ offset = next->offset;
+ found_bitmap = true;
+ last = next;
+ continue;
+ }
+
/*
* we haven't filled the empty size and the window is
* very large. reset and try again
window_free = entry->bytes;
last = entry;
max_extent = 0;
- total_retries++;
- if (total_retries % 64 == 0) {
- if (min_bytes >= (bytes + empty_size)) {
- ret = -ENOSPC;
- goto out;
- }
- /*
- * grow our allocation a bit, we're not having
- * much luck
- */
- min_bytes *= 2;
- goto again;
- }
} else {
last = next;
window_free += next->bytes;
* The cluster includes an rbtree, but only uses the offset index
* of each free space cache entry.
*/
- while(1) {
+ while (1) {
node = rb_next(&entry->offset_index);
- unlink_free_space(block_group, entry);
+ if (entry->bitmap && node) {
+ entry = rb_entry(node, struct btrfs_free_space,
+ offset_index);
+ continue;
+ } else if (entry->bitmap && !node) {
+ break;
+ }
+
+ rb_erase(&entry->offset_index, &block_group->free_space_offset);
ret = tree_insert_offset(&cluster->root, entry->offset,
- &entry->offset_index);
+ &entry->offset_index, 0);
BUG_ON(ret);
if (!node || entry == last)
entry = rb_entry(node, struct btrfs_free_space, offset_index);
}
- ret = 0;
+
cluster->max_size = max_extent;
+got_it:
+ ret = 0;
atomic_inc(&block_group->count);
list_add_tail(&cluster->block_group_list, &block_group->cluster_list);
cluster->block_group = block_group;
spin_lock_init(&cluster->refill_lock);
cluster->root.rb_node = NULL;
cluster->max_size = 0;
+ cluster->points_to_bitmap = false;
INIT_LIST_HEAD(&cluster->block_group_list);
cluster->block_group = NULL;
}
#ifndef __BTRFS_FREE_SPACE_CACHE
#define __BTRFS_FREE_SPACE_CACHE
+struct btrfs_free_space {
+ struct rb_node offset_index;
+ u64 offset;
+ u64 bytes;
+ unsigned long *bitmap;
+ struct list_head list;
+};
+
int btrfs_add_free_space(struct btrfs_block_group_cache *block_group,
u64 bytenr, u64 size);
int btrfs_remove_free_space(struct btrfs_block_group_cache *block_group,
if (root->ref_cows)
btrfs_drop_extent_cache(inode, new_size & (~mask), (u64)-1, 0);
path = btrfs_alloc_path();
- path->reada = -1;
BUG_ON(!path);
+ path->reada = -1;
/* FIXME, add redo link to tree so we don't leak on crash */
key.objectid = inode->i_ino;
{
struct btrfs_root *root = BTRFS_I(inode)->root;
struct btrfs_inode *entry;
- struct rb_node **p = &root->inode_tree.rb_node;
- struct rb_node *parent = NULL;
+ struct rb_node **p;
+ struct rb_node *parent;
+
+again:
+ p = &root->inode_tree.rb_node;
+ parent = NULL;
spin_lock(&root->inode_lock);
while (*p) {
entry = rb_entry(parent, struct btrfs_inode, rb_node);
if (inode->i_ino < entry->vfs_inode.i_ino)
- p = &(*p)->rb_left;
+ p = &parent->rb_left;
else if (inode->i_ino > entry->vfs_inode.i_ino)
- p = &(*p)->rb_right;
+ p = &parent->rb_right;
else {
WARN_ON(!(entry->vfs_inode.i_state &
(I_WILL_FREE | I_FREEING | I_CLEAR)));
- break;
+ rb_erase(parent, &root->inode_tree);
+ RB_CLEAR_NODE(parent);
+ spin_unlock(&root->inode_lock);
+ goto again;
}
}
rb_link_node(&BTRFS_I(inode)->rb_node, parent, p);
{
struct btrfs_root *root = BTRFS_I(inode)->root;
+ spin_lock(&root->inode_lock);
if (!RB_EMPTY_NODE(&BTRFS_I(inode)->rb_node)) {
- spin_lock(&root->inode_lock);
rb_erase(&BTRFS_I(inode)->rb_node, &root->inode_tree);
- spin_unlock(&root->inode_lock);
RB_CLEAR_NODE(&BTRFS_I(inode)->rb_node);
}
+ spin_unlock(&root->inode_lock);
}
static noinline void init_btrfs_i(struct inode *inode)
* and the replacement file is large. Start IO on it now so
* we don't add too much work to the end of the transaction
*/
- if (new_inode && old_inode && S_ISREG(old_inode->i_mode) &&
- new_inode->i_size &&
+ if (new_inode && S_ISREG(old_inode->i_mode) && new_inode->i_size &&
old_inode->i_size > BTRFS_ORDERED_OPERATIONS_FLUSH_LIMIT)
filemap_flush(old_inode->i_mapping);
}
printk(KERN_INFO "node %llu level %d total ptrs %d free spc %u\n",
(unsigned long long)btrfs_header_bytenr(c),
- btrfs_header_level(c), nr,
+ level, nr,
(u32)BTRFS_NODEPTRS_PER_BLOCK(root) - nr);
for (i = 0; i < nr; i++) {
btrfs_node_key_to_cpu(c, &key, i);
btrfs_level_size(root, level - 1),
btrfs_node_ptr_generation(c, i));
if (btrfs_is_leaf(next) &&
- btrfs_header_level(c) != 1)
+ level != 1)
BUG();
if (btrfs_header_level(next) !=
- btrfs_header_level(c) - 1)
+ level - 1)
BUG();
btrfs_print_tree(root, next);
free_extent_buffer(next);
err = ret;
goto out;
}
+ if (ret > 0 && path2->slots[level] > 0)
+ path2->slots[level]--;
eb = path2->nodes[level];
WARN_ON(btrfs_node_blockptr(eb, path2->slots[level]) !=
BUG_ON(level == 0);
path->lowest_level = level;
ret = btrfs_search_slot(NULL, reloc_root, &key, path, 0, 0);
+ path->lowest_level = 0;
if (ret < 0) {
btrfs_free_path(path);
return ret;
last_index = (start + len - 1) >> PAGE_CACHE_SHIFT;
/* make sure the dirty trick played by the caller work */
- ret = invalidate_inode_pages2_range(inode->i_mapping,
- first_index, last_index);
+ while (1) {
+ ret = invalidate_inode_pages2_range(inode->i_mapping,
+ first_index, last_index);
+ if (ret != -EBUSY)
+ break;
+ schedule_timeout(HZ/10);
+ }
if (ret)
goto out_unlock;
}
}
+static noinline void switch_commit_root(struct btrfs_root *root)
+{
+ free_extent_buffer(root->commit_root);
+ root->commit_root = btrfs_root_node(root);
+}
+
/*
* either allocate a new transaction or hop into the existing one
*/
btrfs_write_dirty_block_groups(trans, root);
- ret = btrfs_run_delayed_refs(trans, root, (unsigned long)-1);
- BUG_ON(ret);
-
while (1) {
old_root_bytenr = btrfs_root_bytenr(&root->root_item);
if (old_root_bytenr == root->node->start)
&root->root_key,
&root->root_item);
BUG_ON(ret);
- btrfs_write_dirty_block_groups(trans, root);
- ret = btrfs_run_delayed_refs(trans, root, (unsigned long)-1);
+ ret = btrfs_write_dirty_block_groups(trans, root);
BUG_ON(ret);
}
- free_extent_buffer(root->commit_root);
- root->commit_root = btrfs_root_node(root);
+
+ if (root != root->fs_info->extent_root)
+ switch_commit_root(root);
+
return 0;
}
root = list_entry(next, struct btrfs_root, dirty_list);
update_cowonly_root(trans, root);
-
- ret = btrfs_run_delayed_refs(trans, root, (unsigned long)-1);
- BUG_ON(ret);
}
+
+ down_write(&fs_info->extent_commit_sem);
+ switch_commit_root(fs_info->extent_root);
+ up_write(&fs_info->extent_commit_sem);
+
return 0;
}
btrfs_update_reloc_root(trans, root);
if (root->commit_root != root->node) {
- free_extent_buffer(root->commit_root);
- root->commit_root = btrfs_root_node(root);
+ switch_commit_root(root);
btrfs_set_root_node(&root->root_item,
root->node);
}
super->root_level = root_item->level;
}
+int btrfs_transaction_in_commit(struct btrfs_fs_info *info)
+{
+ int ret = 0;
+ spin_lock(&info->new_trans_lock);
+ if (info->running_transaction)
+ ret = info->running_transaction->in_commit;
+ spin_unlock(&info->new_trans_lock);
+ return ret;
+}
+
int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
struct btrfs_root *root)
{
mutex_unlock(&root->fs_info->trans_mutex);
- if (flush_on_commit || snap_pending) {
- if (flush_on_commit)
- btrfs_start_delalloc_inodes(root);
+ if (flush_on_commit) {
+ btrfs_start_delalloc_inodes(root);
+ ret = btrfs_wait_ordered_extents(root, 0);
+ BUG_ON(ret);
+ } else if (snap_pending) {
ret = btrfs_wait_ordered_extents(root, 1);
BUG_ON(ret);
}
btrfs_set_root_node(&root->fs_info->tree_root->root_item,
root->fs_info->tree_root->node);
- free_extent_buffer(root->fs_info->tree_root->commit_root);
- root->fs_info->tree_root->commit_root =
- btrfs_root_node(root->fs_info->tree_root);
+ switch_commit_root(root->fs_info->tree_root);
btrfs_set_root_node(&root->fs_info->chunk_root->root_item,
root->fs_info->chunk_root->node);
- free_extent_buffer(root->fs_info->chunk_root->commit_root);
- root->fs_info->chunk_root->commit_root =
- btrfs_root_node(root->fs_info->chunk_root);
+ switch_commit_root(root->fs_info->chunk_root);
update_super_roots(root);
cur_trans->commit_done = 1;
root->fs_info->last_trans_committed = cur_trans->transid;
+
wake_up(&cur_trans->commit_wait);
put_transaction(cur_trans);
struct btrfs_root *root);
int btrfs_write_and_wait_marked_extents(struct btrfs_root *root,
struct extent_io_tree *dirty_pages);
+int btrfs_transaction_in_commit(struct btrfs_fs_info *info);
#endif
return -ENOENT;
inode = read_one_inode(root, key->objectid);
- BUG_ON(!dir);
+ BUG_ON(!inode);
ref_ptr = btrfs_item_ptr_offset(eb, slot);
ref_end = ref_ptr + btrfs_item_size_nr(eb, slot);
*/
static noinline int find_free_dev_extent(struct btrfs_trans_handle *trans,
struct btrfs_device *device,
- u64 num_bytes, u64 *start)
+ u64 num_bytes, u64 *start,
+ u64 *max_avail)
{
struct btrfs_key key;
struct btrfs_root *root = device->dev_root;
ret = btrfs_search_slot(trans, root, &key, path, 0, 0);
if (ret < 0)
goto error;
- ret = btrfs_previous_item(root, path, 0, key.type);
- if (ret < 0)
- goto error;
+ if (ret > 0) {
+ ret = btrfs_previous_item(root, path, key.objectid, key.type);
+ if (ret < 0)
+ goto error;
+ if (ret > 0)
+ start_found = 1;
+ }
l = path->nodes[0];
btrfs_item_key_to_cpu(l, &key, path->slots[0]);
while (1) {
if (last_byte < search_start)
last_byte = search_start;
hole_size = key.offset - last_byte;
+
+ if (hole_size > *max_avail)
+ *max_avail = hole_size;
+
if (key.offset > last_byte &&
hole_size >= num_bytes) {
*start = last_byte;
device->fs_devices->total_rw_bytes += diff;
device->total_bytes = new_size;
+ device->disk_total_bytes = new_size;
btrfs_clear_space_info_full(device->dev_root->fs_info);
return btrfs_update_device(trans, device);
goto done;
if (ret) {
ret = 0;
- goto done;
+ break;
}
l = path->nodes[0];
btrfs_item_key_to_cpu(l, &key, path->slots[0]);
if (key.objectid != device->devid)
- goto done;
+ break;
dev_extent = btrfs_item_ptr(l, slot, struct btrfs_dev_extent);
length = btrfs_dev_extent_length(l, dev_extent);
max_chunk_size);
again:
+ max_avail = 0;
if (!map || map->num_stripes != num_stripes) {
kfree(map);
map = kmalloc(map_lookup_size(num_stripes), GFP_NOFS);
if (device->in_fs_metadata && avail >= min_free) {
ret = find_free_dev_extent(trans, device,
- min_free, &dev_offset);
+ min_free, &dev_offset,
+ &max_avail);
if (ret == 0) {
list_move_tail(&device->dev_alloc_list,
&private_devs);
}
}
- for (i = 0; i > nr; i++) {
- struct btrfs_multi_bio *multi;
- struct btrfs_bio_stripe *stripe;
- int ret;
-
- length = 1;
- ret = btrfs_map_block(map_tree, WRITE, buf[i],
- &length, &multi, 0);
- BUG_ON(ret);
-
- stripe = multi->stripes;
- for (j = 0; j < multi->num_stripes; j++) {
- if (stripe->physical >= physical &&
- physical < stripe->physical + length)
- break;
- }
- BUG_ON(j >= multi->num_stripes);
- kfree(multi);
- }
-
*logical = buf;
*naddrs = nr;
*stripe_len = map->stripe_len;
*total_in = 0;
workspace = find_zlib_workspace();
- if (!workspace)
+ if (IS_ERR(workspace))
return -1;
if (Z_OK != zlib_deflateInit(&workspace->def_strm, 3)) {
char *kaddr;
workspace = find_zlib_workspace();
- if (!workspace)
+ if (IS_ERR(workspace))
return -ENOMEM;
data_in = kmap(pages_in[page_in_index]);
return -ENOMEM;
workspace = find_zlib_workspace();
- if (!workspace)
+ if (IS_ERR(workspace))
return -ENOMEM;
workspace->inf_strm.next_in = data_in;
struct zone *zone;
int nid;
- wakeup_pdflush(1024);
+ wakeup_flusher_threads(1024);
yield();
for_each_online_node(nid) {
if (!test_set_buffer_dirty(bh)) {
struct page *page = bh->b_page;
- if (!TestSetPageDirty(page))
- __set_page_dirty(page, page_mapping(page), 0);
+ if (!TestSetPageDirty(page)) {
+ struct address_space *mapping = page_mapping(page);
+ if (mapping)
+ __set_page_dirty(page, mapping, 0);
+ }
}
}
* - no readahead or I/O queue unplugging required
*/
struct backing_dev_info directly_mappable_cdev_bdi = {
+ .name = "char",
.capabilities = (
#ifdef CONFIG_MMU
/* permit private copies of the data to be taken */
}
/**
- * register_chrdev() - Register a major number for character devices.
+ * __register_chrdev() - create and register a cdev occupying a range of minors
* @major: major device number or 0 for dynamic allocation
+ * @baseminor: first of the requested range of minor numbers
+ * @count: the number of minor numbers required
* @name: name of this range of devices
* @fops: file operations associated with this devices
*
* /dev. It only helps to keep track of the different owners of devices. If
* your module name has only one type of devices it's ok to use e.g. the name
* of the module here.
- *
- * This function registers a range of 256 minor numbers. The first minor number
- * is 0.
*/
-int register_chrdev(unsigned int major, const char *name,
- const struct file_operations *fops)
+int __register_chrdev(unsigned int major, unsigned int baseminor,
+ unsigned int count, const char *name,
+ const struct file_operations *fops)
{
struct char_device_struct *cd;
struct cdev *cdev;
char *s;
int err = -ENOMEM;
- cd = __register_chrdev_region(major, 0, 256, name);
+ cd = __register_chrdev_region(major, baseminor, count, name);
if (IS_ERR(cd))
return PTR_ERR(cd);
for (s = strchr(kobject_name(&cdev->kobj),'/'); s; s = strchr(s, '/'))
*s = '!';
- err = cdev_add(cdev, MKDEV(cd->major, 0), 256);
+ err = cdev_add(cdev, MKDEV(cd->major, baseminor), count);
if (err)
goto out;
out:
kobject_put(&cdev->kobj);
out2:
- kfree(__unregister_chrdev_region(cd->major, 0, 256));
+ kfree(__unregister_chrdev_region(cd->major, baseminor, count));
return err;
}
}
}
-void unregister_chrdev(unsigned int major, const char *name)
+/**
+ * __unregister_chrdev - unregister and destroy a cdev
+ * @major: major device number
+ * @baseminor: first of the range of minor numbers
+ * @count: the number of minor numbers this cdev is occupying
+ * @name: name of this range of devices
+ *
+ * Unregister and destroy the cdev occupying the region described by
+ * @major, @baseminor and @count. This function undoes what
+ * __register_chrdev() did.
+ */
+void __unregister_chrdev(unsigned int major, unsigned int baseminor,
+ unsigned int count, const char *name)
{
struct char_device_struct *cd;
- cd = __unregister_chrdev_region(major, 0, 256);
+
+ cd = __unregister_chrdev_region(major, baseminor, count);
if (cd && cd->cdev)
cdev_del(cd->cdev);
kfree(cd);
EXPORT_SYMBOL(cdev_del);
EXPORT_SYMBOL(cdev_add);
EXPORT_SYMBOL(cdev_index);
-EXPORT_SYMBOL(register_chrdev);
-EXPORT_SYMBOL(unregister_chrdev);
+EXPORT_SYMBOL(__register_chrdev);
+EXPORT_SYMBOL(__unregister_chrdev);
EXPORT_SYMBOL(directly_mappable_cdev_bdi);
+Version 1.60
+-------------
+Fix memory leak in reconnect. Fix oops in DFS mount error path.
+Set s_maxbytes to smaller (the max that vfs can handle) so that
+sendfile will now work over cifs mounts again. Add noforcegid
+and noforceuid mount parameters.
+
Version 1.59
------------
Client uses server inode numbers (which are persistent) rather than
mount.
domain Set the SMB/CIFS workgroup name prepended to the
username during CIFS session establishment
- forceuid Set the default uid for inodes based on the uid
- passed in. For mounts to servers
+ forceuid Set the default uid for inodes to the uid
+ passed in on mount. For mounts to servers
which do support the CIFS Unix extensions, such as a
properly configured Samba server, the server provides
- the uid, gid and mode so this parameter should not be
+ the uid, gid and mode so this parameter should not be
specified unless the server and clients uid and gid
numbering differ. If the server and client are in the
same domain (e.g. running winbind or nss_ldap) and
of existing files will be the uid (gid) of the person
who executed the mount (root, except when mount.cifs
is configured setuid for user mounts) unless the "uid="
- (gid) mount option is specified. For the uid (gid) of newly
- created files and directories, ie files created since
- the last mount of the server share, the expected uid
- (gid) is cached as long as the inode remains in
- memory on the client. Also note that permission
+ (gid) mount option is specified. Also note that permission
checks (authorization checks) on accesses to a file occur
at the server, but there are cases in which an administrator
may want to restrict at the client as well. For those
(such as Windows), permissions can also be checked at the
client, and a crude form of client side permission checking
can be enabled by specifying file_mode and dir_mode on
- the client. Note that the mount.cifs helper must be
- at version 1.10 or higher to support specifying the uid
- (or gid) in non-numeric form.
- forcegid (similar to above but for the groupid instead of uid)
+ the client. (default)
+ forcegid (similar to above but for the groupid instead of uid) (default)
+ noforceuid Fill in file owner information (uid) by requesting it from
+ the server if possible. With this option, the value given in
+ the uid= option (on mount) will only be used if the server
+ can not support returning uids on inodes.
+ noforcegid (similar to above but for the group owner, gid, instead of uid)
uid Set the default uid for inodes, and indicate to the
- cifs kernel driver which local user mounted . If the server
+ cifs kernel driver which local user mounted. If the server
supports the unix extensions the default uid is
not used to fill in the owner fields of inodes (files)
unless the "forceuid" parameter is specified.
atomic_set(&tcon->num_reads, 0);
atomic_set(&tcon->num_oplock_brks, 0);
atomic_set(&tcon->num_opens, 0);
+ atomic_set(&tcon->num_posixopens, 0);
+ atomic_set(&tcon->num_posixmkdirs, 0);
atomic_set(&tcon->num_closes, 0);
atomic_set(&tcon->num_deletes, 0);
atomic_set(&tcon->num_mkdirs, 0);
atomic_read(&tcon->num_locks),
atomic_read(&tcon->num_hardlinks),
atomic_read(&tcon->num_symlinks));
- seq_printf(m, "\nOpens: %d Closes: %d"
+ seq_printf(m, "\nOpens: %d Closes: %d "
"Deletes: %d",
atomic_read(&tcon->num_opens),
atomic_read(&tcon->num_closes),
atomic_read(&tcon->num_deletes));
+ seq_printf(m, "\nPosix Opens: %d "
+ "Posix Mkdirs: %d",
+ atomic_read(&tcon->num_posixopens),
+ atomic_read(&tcon->num_posixmkdirs));
seq_printf(m, "\nMkdirs: %d Rmdirs: %d",
atomic_read(&tcon->num_mkdirs),
atomic_read(&tcon->num_rmdirs));
* i.e. strips from UNC trailing path that is not part of share
* name and fixup missing '\' in the begining of DFS node refferal
* if neccessary.
- * Returns pointer to share name on success or NULL on error.
+ * Returns pointer to share name on success or ERR_PTR on error.
* Caller is responsible for freeing returned string.
*/
static char *cifs_get_share_name(const char *node_name)
UNC = kmalloc(len+2 /*for term null and additional \ if it's missed */,
GFP_KERNEL);
if (!UNC)
- return NULL;
+ return ERR_PTR(-ENOMEM);
/* get share name and server name */
if (node_name[1] != '\\') {
cERROR(1, ("%s: no server name end in node name: %s",
__func__, node_name));
kfree(UNC);
- return NULL;
+ return ERR_PTR(-EINVAL);
}
/* find sharename end */
return ERR_PTR(-EINVAL);
*devname = cifs_get_share_name(ref->node_name);
+ if (IS_ERR(*devname)) {
+ rc = PTR_ERR(*devname);
+ *devname = NULL;
+ goto compose_mount_options_err;
+ }
+
rc = dns_resolve_server_name_to_ip(*devname, &srvIP);
if (rc != 0) {
cERROR(1, ("%s: Failed to resolve server part of %s to IP: %d",
int maxwords = maxbytes / 2;
char tmp[NLS_MAX_CHARSET_SIZE];
- for (i = 0; from[i] && i < maxwords; i++) {
+ for (i = 0; i < maxwords && from[i]; i++) {
charlen = codepage->uni2char(le16_to_cpu(from[i]), tmp,
NLS_MAX_CHARSET_SIZE);
if (charlen > 0)
seq_printf(s, ",uid=%d", cifs_sb->mnt_uid);
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_UID)
seq_printf(s, ",forceuid");
+ else
+ seq_printf(s, ",noforceuid");
seq_printf(s, ",gid=%d", cifs_sb->mnt_gid);
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_GID)
seq_printf(s, ",forcegid");
+ else
+ seq_printf(s, ",noforcegid");
cifs_show_address(s, tcon->ses->server);
atomic_t num_closes;
atomic_t num_deletes;
atomic_t num_mkdirs;
+ atomic_t num_posixopens;
+ atomic_t num_posixmkdirs;
atomic_t num_rmdirs;
atomic_t num_renames;
atomic_t num_t2renames;
psx_create_err:
cifs_buf_release(pSMB);
- cifs_stats_inc(&tcon->num_mkdirs);
+ if (posix_flags & SMB_O_DIRECTORY)
+ cifs_stats_inc(&tcon->num_posixmkdirs);
+ else
+ cifs_stats_inc(&tcon->num_posixopens);
if (rc == -EAGAIN)
goto PsxCreat;
char *data;
unsigned int temp_len, i, j;
char separator[2];
+ short int override_uid = -1;
+ short int override_gid = -1;
+ bool uid_specified = false;
+ bool gid_specified = false;
separator[0] = ',';
separator[1] = 0;
"too long.\n");
return 1;
}
- } else if (strnicmp(data, "uid", 3) == 0) {
- if (value && *value)
- vol->linux_uid =
- simple_strtoul(value, &value, 0);
- } else if (strnicmp(data, "forceuid", 8) == 0) {
- vol->override_uid = 1;
- } else if (strnicmp(data, "gid", 3) == 0) {
- if (value && *value)
- vol->linux_gid =
- simple_strtoul(value, &value, 0);
- } else if (strnicmp(data, "forcegid", 8) == 0) {
- vol->override_gid = 1;
+ } else if (!strnicmp(data, "uid", 3) && value && *value) {
+ vol->linux_uid = simple_strtoul(value, &value, 0);
+ uid_specified = true;
+ } else if (!strnicmp(data, "forceuid", 8)) {
+ override_uid = 1;
+ } else if (!strnicmp(data, "noforceuid", 10)) {
+ override_uid = 0;
+ } else if (!strnicmp(data, "gid", 3) && value && *value) {
+ vol->linux_gid = simple_strtoul(value, &value, 0);
+ gid_specified = true;
+ } else if (!strnicmp(data, "forcegid", 8)) {
+ override_gid = 1;
+ } else if (!strnicmp(data, "noforcegid", 10)) {
+ override_gid = 0;
} else if (strnicmp(data, "file_mode", 4) == 0) {
if (value && *value) {
vol->file_mode =
if (vol->UNCip == NULL)
vol->UNCip = &vol->UNC[2];
+ if (uid_specified)
+ vol->override_uid = override_uid;
+ else if (override_uid == 1)
+ printk(KERN_NOTICE "CIFS: ignoring forceuid mount option "
+ "specified with no uid= option.\n");
+
+ if (gid_specified)
+ vol->override_gid = override_gid;
+ else if (override_gid == 1)
+ printk(KERN_NOTICE "CIFS: ignoring forcegid mount option "
+ "specified with no gid= option.\n");
+
return 0;
}
tcon->local_lease = volume_info->local_lease;
}
if (pSesInfo) {
- if (pSesInfo->capabilities & CAP_LARGE_FILES) {
- sb->s_maxbytes = (u64) 1 << 63;
- } else
- sb->s_maxbytes = (u64) 1 << 31; /* 2 GB */
+ if (pSesInfo->capabilities & CAP_LARGE_FILES)
+ sb->s_maxbytes = MAX_LFS_FILESIZE;
+ else
+ sb->s_maxbytes = MAX_NON_LFS;
}
/* BB FIXME fix time_gran to be larger for LANMAN sessions */
if (mount_data != mount_data_global)
kfree(mount_data);
+
mount_data = cifs_compose_mount_options(
cifs_sb->mountdata, full_path + 1,
referrals, &fake_devname);
- kfree(fake_devname);
+
free_dfs_info_array(referrals, num_referrals);
+ kfree(fake_devname);
+ kfree(full_path);
+
+ if (IS_ERR(mount_data)) {
+ rc = PTR_ERR(mount_data);
+ mount_data = NULL;
+ goto mount_fail_check;
+ }
if (tcon)
cifs_put_tcon(tcon);
cifs_put_smb_ses(pSesInfo);
cleanup_volume_info(&volume_info);
- FreeXid(xid);
- kfree(full_path);
referral_walks_count++;
goto try_mount_again;
}
strncpy(tcon->treeName, tree, MAX_TREE_SIZE);
/* mostly informational -- no need to fail on error here */
+ kfree(tcon->nativeFileSystem);
tcon->nativeFileSystem = cifs_strndup_from_ucs(bcc_ptr,
bytes_left, is_unicode,
nls_codepage);
* junction to the new submount (ie to setup the fake directory
* which represents a DFS referral).
*/
-void
+static void
cifs_create_dfs_fattr(struct cifs_fattr *fattr, struct super_block *sb)
{
struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
}
/* Fill a cifs_fattr struct with info from FILE_ALL_INFO */
-void
+static void
cifs_all_info_to_fattr(struct cifs_fattr *fattr, FILE_ALL_INFO *info,
struct cifs_sb_info *cifs_sb, bool adjust_tz)
{
cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
if (rc1) {
- /* BB EOPNOSUPP disable SERVER_INUM? */
cFYI(1, ("GetSrvInodeNum rc %d", rc1));
fattr.cf_uniqueid = iunique(sb, ROOT_I);
+ /* disable serverino if call not supported */
+ if (rc1 == -EINVAL)
+ cifs_sb->mnt_cifs_flags &=
+ ~CIFS_MOUNT_SERVER_INUM;
}
} else {
fattr.cf_uniqueid = iunique(sb, ROOT_I);
if (!bprm)
goto out_files;
- retval = -ERESTARTNOINTR;
- if (mutex_lock_interruptible(¤t->cred_guard_mutex))
+ retval = prepare_bprm_creds(bprm);
+ if (retval)
goto out_free;
- current->in_execve = 1;
-
- retval = -ENOMEM;
- bprm->cred = prepare_exec_creds();
- if (!bprm->cred)
- goto out_unlock;
retval = check_unsafe_exec(bprm);
if (retval < 0)
- goto out_unlock;
+ goto out_free;
clear_in_exec = retval;
+ current->in_execve = 1;
file = open_exec(filename);
retval = PTR_ERR(file);
/* execve succeeded */
current->fs->in_exec = 0;
current->in_execve = 0;
- mutex_unlock(¤t->cred_guard_mutex);
acct_update_integrals(current);
free_bprm(bprm);
if (displaced)
out_unmark:
if (clear_in_exec)
current->fs->in_exec = 0;
-
-out_unlock:
current->in_execve = 0;
- mutex_unlock(¤t->cred_guard_mutex);
out_free:
free_bprm(bprm);
COMPATIBLE_IOCTL(FIOASYNC)
COMPATIBLE_IOCTL(FIONBIO)
COMPATIBLE_IOCTL(FIONREAD) /* This is also TIOCINQ */
+COMPATIBLE_IOCTL(FS_IOC_FIEMAP)
/* 0x00 */
COMPATIBLE_IOCTL(FIBMAP)
COMPATIBLE_IOCTL(FIGETBSZ)
};
static struct backing_dev_info configfs_backing_dev_info = {
+ .name = "configfs",
.ra_pages = 0, /* No readahead */
.capabilities = BDI_CAP_NO_ACCT_AND_WRITEBACK,
};
static int find_rsb(struct dlm_ls *ls, char *name, int namelen,
unsigned int flags, struct dlm_rsb **r_ret)
{
- struct dlm_rsb *r, *tmp;
+ struct dlm_rsb *r = NULL, *tmp;
uint32_t hash, bucket;
int error = -EINVAL;
int result = -EHOSTUNREACH;
struct sockaddr_storage saddr, src_addr;
int addr_len;
- struct socket *sock;
+ struct socket *sock = NULL;
if (con->nodeid == 0) {
log_print("attempt to connect sock 0 foiled");
if (con->sock) {
sock_release(con->sock);
con->sock = NULL;
+ } else if (sock) {
+ sock_release(sock);
}
/*
* Some errors are fatal and this list might need adjusting. For other
{
struct dlm_plock_info info;
struct plock_op *op;
- int found = 0;
+ int found = 0, do_callback = 0;
if (count != sizeof(info))
return -EINVAL;
spin_lock(&ops_lock);
list_for_each_entry(op, &recv_list, list) {
- if (op->info.fsid == info.fsid && op->info.number == info.number &&
+ if (op->info.fsid == info.fsid &&
+ op->info.number == info.number &&
op->info.owner == info.owner) {
+ struct plock_xop *xop = (struct plock_xop *)op;
list_del_init(&op->list);
- found = 1;
- op->done = 1;
memcpy(&op->info, &info, sizeof(info));
+ if (xop->callback)
+ do_callback = 1;
+ else
+ op->done = 1;
+ found = 1;
break;
}
}
spin_unlock(&ops_lock);
if (found) {
- struct plock_xop *xop;
- xop = (struct plock_xop *)op;
- if (xop->callback)
+ if (do_callback)
dlm_plock_callback(op);
else
wake_up(&recv_wq);
}
(*new_auth_tok)->session_key.encrypted_key_size =
(body_size - (ECRYPTFS_SALT_SIZE + 5));
+ if ((*new_auth_tok)->session_key.encrypted_key_size
+ > ECRYPTFS_MAX_ENCRYPTED_KEY_BYTES) {
+ printk(KERN_WARNING "Tag 3 packet contains key larger "
+ "than ECRYPTFS_MAX_ENCRYPTED_KEY_BYTES\n");
+ rc = -EINVAL;
+ goto out_free;
+ }
if (unlikely(data[(*packet_size)++] != 0x04)) {
printk(KERN_WARNING "Unknown version number [%d]\n",
data[(*packet_size) - 1]);
rc = -EINVAL;
goto out;
}
+ if (unlikely((*tag_11_contents_size) > max_contents_bytes)) {
+ printk(KERN_ERR "Literal data section in tag 11 packet exceeds "
+ "expected size\n");
+ rc = -EINVAL;
+ goto out;
+ }
if (data[(*packet_size)++] != 0x62) {
printk(KERN_WARNING "Unrecognizable packet\n");
rc = -EINVAL;
}
EXPORT_SYMBOL(open_exec);
-int kernel_read(struct file *file, unsigned long offset,
- char *addr, unsigned long count)
+int kernel_read(struct file *file, loff_t offset,
+ char *addr, unsigned long count)
{
mm_segment_t old_fs;
loff_t pos = offset;
EXPORT_SYMBOL(flush_old_exec);
+/*
+ * Prepare credentials and lock ->cred_guard_mutex.
+ * install_exec_creds() commits the new creds and drops the lock.
+ * Or, if exec fails before, free_bprm() should release ->cred and
+ * and unlock.
+ */
+int prepare_bprm_creds(struct linux_binprm *bprm)
+{
+ if (mutex_lock_interruptible(¤t->cred_guard_mutex))
+ return -ERESTARTNOINTR;
+
+ bprm->cred = prepare_exec_creds();
+ if (likely(bprm->cred))
+ return 0;
+
+ mutex_unlock(¤t->cred_guard_mutex);
+ return -ENOMEM;
+}
+
+void free_bprm(struct linux_binprm *bprm)
+{
+ free_arg_pages(bprm);
+ if (bprm->cred) {
+ mutex_unlock(¤t->cred_guard_mutex);
+ abort_creds(bprm->cred);
+ }
+ kfree(bprm);
+}
+
/*
* install the new credentials for this executable
*/
commit_creds(bprm->cred);
bprm->cred = NULL;
-
- /* cred_guard_mutex must be held at least to this point to prevent
+ /*
+ * cred_guard_mutex must be held at least to this point to prevent
* ptrace_attach() from altering our determination of the task's
- * credentials; any time after this it may be unlocked */
-
+ * credentials; any time after this it may be unlocked.
+ */
security_bprm_committed_creds(bprm);
+ mutex_unlock(¤t->cred_guard_mutex);
}
EXPORT_SYMBOL(install_exec_creds);
EXPORT_SYMBOL(search_binary_handler);
-void free_bprm(struct linux_binprm *bprm)
-{
- free_arg_pages(bprm);
- if (bprm->cred)
- abort_creds(bprm->cred);
- kfree(bprm);
-}
-
/*
* sys_execve() executes a new program.
*/
if (!bprm)
goto out_files;
- retval = -ERESTARTNOINTR;
- if (mutex_lock_interruptible(¤t->cred_guard_mutex))
+ retval = prepare_bprm_creds(bprm);
+ if (retval)
goto out_free;
- current->in_execve = 1;
-
- retval = -ENOMEM;
- bprm->cred = prepare_exec_creds();
- if (!bprm->cred)
- goto out_unlock;
retval = check_unsafe_exec(bprm);
if (retval < 0)
- goto out_unlock;
+ goto out_free;
clear_in_exec = retval;
+ current->in_execve = 1;
file = open_exec(filename);
retval = PTR_ERR(file);
/* execve succeeded */
current->fs->in_exec = 0;
current->in_execve = 0;
- mutex_unlock(¤t->cred_guard_mutex);
acct_update_integrals(current);
free_bprm(bprm);
if (displaced)
out_unmark:
if (clear_in_exec)
current->fs->in_exec = 0;
-
-out_unlock:
current->in_execve = 0;
- mutex_unlock(¤t->cred_guard_mutex);
out_free:
free_bprm(bprm);
return error;
}
-static int
+int
ext2_check_acl(struct inode *inode, int mask)
{
struct posix_acl *acl = ext2_get_acl(inode, ACL_TYPE_ACCESS);
return -EAGAIN;
}
-int
-ext2_permission(struct inode *inode, int mask)
-{
- return generic_permission(inode, mask, ext2_check_acl);
-}
-
/*
* Initialize the ACLs of a new inode. Called from ext2_new_inode.
*
#ifdef CONFIG_EXT2_FS_POSIX_ACL
/* acl.c */
-extern int ext2_permission (struct inode *, int);
+extern int ext2_check_acl (struct inode *, int);
extern int ext2_acl_chmod (struct inode *);
extern int ext2_init_acl (struct inode *, struct inode *);
#else
#include <linux/sched.h>
-#define ext2_permission NULL
+#define ext2_check_acl NULL
#define ext2_get_acl NULL
#define ext2_set_acl NULL
.removexattr = generic_removexattr,
#endif
.setattr = ext2_setattr,
- .permission = ext2_permission,
+ .check_acl = ext2_check_acl,
.fiemap = ext2_fiemap,
};
if (dir_de) {
if (old_dir != new_dir)
ext2_set_link(old_inode, dir_de, dir_page, new_dir, 0);
+ else {
+ kunmap(dir_page);
+ page_cache_release(dir_page);
+ }
inode_dec_link_count(old_dir);
}
return 0;
.removexattr = generic_removexattr,
#endif
.setattr = ext2_setattr,
- .permission = ext2_permission,
+ .check_acl = ext2_check_acl,
};
const struct inode_operations ext2_special_inode_operations = {
.removexattr = generic_removexattr,
#endif
.setattr = ext2_setattr,
- .permission = ext2_permission,
+ .check_acl = ext2_check_acl,
};
module will be called ext3.
config EXT3_DEFAULTS_TO_ORDERED
- bool "Default to 'data=ordered' in ext3 (legacy option)"
+ bool "Default to 'data=ordered' in ext3"
depends on EXT3_FS
help
- If a filesystem does not explicitly specify a data ordering
- mode, and the journal capability allowed it, ext3 used to
- historically default to 'data=ordered'.
-
- That was a rather unfortunate choice, because it leads to all
- kinds of latency problems, and the 'data=writeback' mode is more
- appropriate these days.
-
- You should probably always answer 'n' here, and if you really
- want to use 'data=ordered' mode, set it in the filesystem itself
- with 'tune2fs -o journal_data_ordered'.
-
- But if you really want to enable the legacy default, you can do
- so by answering 'y' to this question.
+ The journal mode options for ext3 have different tradeoffs
+ between when data is guaranteed to be on disk and
+ performance. The use of "data=writeback" can cause
+ unwritten data to appear in files after an system crash or
+ power failure, which can be a security issue. However,
+ "data=ordered" mode can also result in major performance
+ problems, including seconds-long delays before an fsync()
+ call returns. For details, see:
+
+ http://ext4.wiki.kernel.org/index.php/Ext3_data_mode_tradeoffs
+
+ If you have been historically happy with ext3's performance,
+ data=ordered mode will be a safe choice and you should
+ answer 'y' here. If you understand the reliability and data
+ privacy issues of data=writeback and are willing to make
+ that trade off, answer 'n'.
config EXT3_FS_XATTR
bool "Ext3 extended attributes"
return error;
}
-static int
+int
ext3_check_acl(struct inode *inode, int mask)
{
struct posix_acl *acl = ext3_get_acl(inode, ACL_TYPE_ACCESS);
return -EAGAIN;
}
-int
-ext3_permission(struct inode *inode, int mask)
-{
- return generic_permission(inode, mask, ext3_check_acl);
-}
-
/*
* Initialize the ACLs of a new inode. Called from ext3_new_inode.
*
#ifdef CONFIG_EXT3_FS_POSIX_ACL
/* acl.c */
-extern int ext3_permission (struct inode *, int);
+extern int ext3_check_acl (struct inode *, int);
extern int ext3_acl_chmod (struct inode *);
extern int ext3_init_acl (handle_t *, struct inode *, struct inode *);
#else /* CONFIG_EXT3_FS_POSIX_ACL */
#include <linux/sched.h>
-#define ext3_permission NULL
+#define ext3_check_acl NULL
static inline int
ext3_acl_chmod(struct inode *inode)
struct buffer_head *bh = NULL;
map_bh.b_state = 0;
- err = ext3_get_blocks_handle(NULL, inode, blk, 1,
- &map_bh, 0, 0);
+ err = ext3_get_blocks_handle(NULL, inode, blk, 1, &map_bh, 0);
if (err > 0) {
pgoff_t index = map_bh.b_blocknr >>
(PAGE_CACHE_SHIFT - inode->i_blkbits);
.listxattr = ext3_listxattr,
.removexattr = generic_removexattr,
#endif
- .permission = ext3_permission,
+ .check_acl = ext3_check_acl,
.fiemap = ext3_fiemap,
};
int ext3_get_blocks_handle(handle_t *handle, struct inode *inode,
sector_t iblock, unsigned long maxblocks,
struct buffer_head *bh_result,
- int create, int extend_disksize)
+ int create)
{
int err = -EIO;
int offsets[4];
if (!err)
err = ext3_splice_branch(handle, inode, iblock,
partial, indirect_blks, count);
- /*
- * i_disksize growing is protected by truncate_mutex. Don't forget to
- * protect it if you're about to implement concurrent
- * ext3_get_block() -bzzz
- */
- if (!err && extend_disksize && inode->i_size > ei->i_disksize)
- ei->i_disksize = inode->i_size;
mutex_unlock(&ei->truncate_mutex);
if (err)
goto cleanup;
}
ret = ext3_get_blocks_handle(handle, inode, iblock,
- max_blocks, bh_result, create, 0);
+ max_blocks, bh_result, create);
if (ret > 0) {
bh_result->b_size = (ret << inode->i_blkbits);
ret = 0;
dummy.b_blocknr = -1000;
buffer_trace_init(&dummy.b_history);
err = ext3_get_blocks_handle(handle, inode, block, 1,
- &dummy, create, 1);
+ &dummy, create);
/*
* ext3_get_blocks_handle() returns number of blocks
* mapped. 0 in case of a HOLE.
* i_size_read because we hold i_mutex.
*
* Add inode to orphan list in case we crash before truncate
- * finishes.
+ * finishes. Do this only if ext3_can_truncate() agrees so
+ * that orphan processing code is happy.
*/
- if (pos + len > inode->i_size)
+ if (pos + len > inode->i_size && ext3_can_truncate(inode))
ext3_orphan_add(handle, inode);
ext3_journal_stop(handle);
unlock_page(page);
page_cache_release(page);
if (pos + len > inode->i_size)
- vmtruncate(inode, inode->i_size);
+ ext3_truncate(inode);
}
if (ret == -ENOSPC && ext3_should_retry_alloc(inode->i_sb, &retries))
goto retry;
* There may be allocated blocks outside of i_size because
* we failed to copy some data. Prepare for truncate.
*/
- if (pos + len > inode->i_size)
+ if (pos + len > inode->i_size && ext3_can_truncate(inode))
ext3_orphan_add(handle, inode);
ret2 = ext3_journal_stop(handle);
if (!ret)
page_cache_release(page);
if (pos + len > inode->i_size)
- vmtruncate(inode, inode->i_size);
+ ext3_truncate(inode);
return ret ? ret : copied;
}
* There may be allocated blocks outside of i_size because
* we failed to copy some data. Prepare for truncate.
*/
- if (pos + len > inode->i_size)
+ if (pos + len > inode->i_size && ext3_can_truncate(inode))
ext3_orphan_add(handle, inode);
ret = ext3_journal_stop(handle);
unlock_page(page);
page_cache_release(page);
if (pos + len > inode->i_size)
- vmtruncate(inode, inode->i_size);
+ ext3_truncate(inode);
return ret ? ret : copied;
}
* There may be allocated blocks outside of i_size because
* we failed to copy some data. Prepare for truncate.
*/
- if (pos + len > inode->i_size)
+ if (pos + len > inode->i_size && ext3_can_truncate(inode))
ext3_orphan_add(handle, inode);
EXT3_I(inode)->i_state |= EXT3_STATE_JDATA;
if (inode->i_size > EXT3_I(inode)->i_disksize) {
page_cache_release(page);
if (pos + len > inode->i_size)
- vmtruncate(inode, inode->i_size);
+ ext3_truncate(inode);
return ret ? ret : copied;
}
.listxattr = ext3_listxattr,
.removexattr = generic_removexattr,
#endif
- .permission = ext3_permission,
+ .check_acl = ext3_check_acl,
};
const struct inode_operations ext3_special_inode_operations = {
.listxattr = ext3_listxattr,
.removexattr = generic_removexattr,
#endif
- .permission = ext3_permission,
+ .check_acl = ext3_check_acl,
};
#endif
}
+static char *data_mode_string(unsigned long mode)
+{
+ switch (mode) {
+ case EXT3_MOUNT_JOURNAL_DATA:
+ return "journal";
+ case EXT3_MOUNT_ORDERED_DATA:
+ return "ordered";
+ case EXT3_MOUNT_WRITEBACK_DATA:
+ return "writeback";
+ }
+ return "unknown";
+}
+
/*
* Show an option if
* - it's set to a non-default value OR
if (test_opt(sb, NOBH))
seq_puts(seq, ",nobh");
- if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_JOURNAL_DATA)
- seq_puts(seq, ",data=journal");
- else if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_ORDERED_DATA)
- seq_puts(seq, ",data=ordered");
- else if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_WRITEBACK_DATA)
- seq_puts(seq, ",data=writeback");
-
+ seq_printf(seq, ",data=%s", data_mode_string(sbi->s_mount_opt &
+ EXT3_MOUNT_DATA_FLAGS));
if (test_opt(sb, DATA_ERR_ABORT))
seq_puts(seq, ",data_err=abort");
datacheck:
if (is_remount) {
if ((sbi->s_mount_opt & EXT3_MOUNT_DATA_FLAGS)
- != data_opt) {
- printk(KERN_ERR
- "EXT3-fs: cannot change data "
- "mode on remount\n");
- return 0;
- }
+ == data_opt)
+ break;
+ printk(KERN_ERR
+ "EXT3-fs (device %s): Cannot change "
+ "data mode on remount. The filesystem "
+ "is mounted in data=%s mode and you "
+ "try to remount it in data=%s mode.\n",
+ sb->s_id,
+ data_mode_string(sbi->s_mount_opt &
+ EXT3_MOUNT_DATA_FLAGS),
+ data_mode_string(data_opt));
+ return 0;
} else {
sbi->s_mount_opt &= ~EXT3_MOUNT_DATA_FLAGS;
sbi->s_mount_opt |= data_opt;
return error;
}
-static int
+int
ext4_check_acl(struct inode *inode, int mask)
{
struct posix_acl *acl = ext4_get_acl(inode, ACL_TYPE_ACCESS);
return -EAGAIN;
}
-int
-ext4_permission(struct inode *inode, int mask)
-{
- return generic_permission(inode, mask, ext4_check_acl);
-}
-
/*
* Initialize the ACLs of a new inode. Called from ext4_new_inode.
*
#ifdef CONFIG_EXT4_FS_POSIX_ACL
/* acl.c */
-extern int ext4_permission(struct inode *, int);
+extern int ext4_check_acl(struct inode *, int);
extern int ext4_acl_chmod(struct inode *);
extern int ext4_init_acl(handle_t *, struct inode *, struct inode *);
#else /* CONFIG_EXT4_FS_POSIX_ACL */
#include <linux/sched.h>
-#define ext4_permission NULL
+#define ext4_check_acl NULL
static inline int
ext4_acl_chmod(struct inode *inode)
.listxattr = ext4_listxattr,
.removexattr = generic_removexattr,
#endif
- .permission = ext4_permission,
+ .check_acl = ext4_check_acl,
.fallocate = ext4_fallocate,
.fiemap = ext4_fiemap,
};
.listxattr = ext4_listxattr,
.removexattr = generic_removexattr,
#endif
- .permission = ext4_permission,
+ .check_acl = ext4_check_acl,
.fiemap = ext4_fiemap,
};
.listxattr = ext4_listxattr,
.removexattr = generic_removexattr,
#endif
- .permission = ext4_permission,
+ .check_acl = ext4_check_acl,
};
#include <linux/sched.h>
#include <linux/fs.h>
#include <linux/mm.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
#include <linux/writeback.h>
#include <linux/blkdev.h>
#include <linux/backing-dev.h>
#include <linux/buffer_head.h>
#include "internal.h"
+#define inode_to_bdi(inode) ((inode)->i_mapping->backing_dev_info)
-/**
- * writeback_acquire - attempt to get exclusive writeback access to a device
- * @bdi: the device's backing_dev_info structure
- *
- * It is a waste of resources to have more than one pdflush thread blocked on
- * a single request queue. Exclusion at the request_queue level is obtained
- * via a flag in the request_queue's backing_dev_info.state.
- *
- * Non-request_queue-backed address_spaces will share default_backing_dev_info,
- * unless they implement their own. Which is somewhat inefficient, as this
- * may prevent concurrent writeback against multiple devices.
+/*
+ * We don't actually have pdflush, but this one is exported though /proc...
*/
-static int writeback_acquire(struct backing_dev_info *bdi)
+int nr_pdflush_threads;
+
+/*
+ * Work items for the bdi_writeback threads
+ */
+struct bdi_work {
+ struct list_head list;
+ struct list_head wait_list;
+ struct rcu_head rcu_head;
+
+ unsigned long seen;
+ atomic_t pending;
+
+ struct super_block *sb;
+ unsigned long nr_pages;
+ enum writeback_sync_modes sync_mode;
+
+ unsigned long state;
+};
+
+enum {
+ WS_USED_B = 0,
+ WS_ONSTACK_B,
+};
+
+#define WS_USED (1 << WS_USED_B)
+#define WS_ONSTACK (1 << WS_ONSTACK_B)
+
+static inline bool bdi_work_on_stack(struct bdi_work *work)
{
- return !test_and_set_bit(BDI_pdflush, &bdi->state);
+ return test_bit(WS_ONSTACK_B, &work->state);
+}
+
+static inline void bdi_work_init(struct bdi_work *work,
+ struct writeback_control *wbc)
+{
+ INIT_RCU_HEAD(&work->rcu_head);
+ work->sb = wbc->sb;
+ work->nr_pages = wbc->nr_to_write;
+ work->sync_mode = wbc->sync_mode;
+ work->state = WS_USED;
+}
+
+static inline void bdi_work_init_on_stack(struct bdi_work *work,
+ struct writeback_control *wbc)
+{
+ bdi_work_init(work, wbc);
+ work->state |= WS_ONSTACK;
}
/**
* writeback_in_progress - determine whether there is writeback in progress
* @bdi: the device's backing_dev_info structure.
*
- * Determine whether there is writeback in progress against a backing device.
+ * Determine whether there is writeback waiting to be handled against a
+ * backing device.
*/
int writeback_in_progress(struct backing_dev_info *bdi)
{
- return test_bit(BDI_pdflush, &bdi->state);
+ return !list_empty(&bdi->work_list);
}
-/**
- * writeback_release - relinquish exclusive writeback access against a device.
- * @bdi: the device's backing_dev_info structure
- */
-static void writeback_release(struct backing_dev_info *bdi)
+static void bdi_work_clear(struct bdi_work *work)
{
- BUG_ON(!writeback_in_progress(bdi));
- clear_bit(BDI_pdflush, &bdi->state);
+ clear_bit(WS_USED_B, &work->state);
+ smp_mb__after_clear_bit();
+ wake_up_bit(&work->state, WS_USED_B);
}
-static noinline void block_dump___mark_inode_dirty(struct inode *inode)
+static void bdi_work_free(struct rcu_head *head)
{
- if (inode->i_ino || strcmp(inode->i_sb->s_id, "bdev")) {
- struct dentry *dentry;
- const char *name = "?";
+ struct bdi_work *work = container_of(head, struct bdi_work, rcu_head);
- dentry = d_find_alias(inode);
- if (dentry) {
- spin_lock(&dentry->d_lock);
- name = (const char *) dentry->d_name.name;
- }
- printk(KERN_DEBUG
- "%s(%d): dirtied inode %lu (%s) on %s\n",
- current->comm, task_pid_nr(current), inode->i_ino,
- name, inode->i_sb->s_id);
- if (dentry) {
- spin_unlock(&dentry->d_lock);
- dput(dentry);
- }
- }
+ if (!bdi_work_on_stack(work))
+ kfree(work);
+ else
+ bdi_work_clear(work);
}
-/**
- * __mark_inode_dirty - internal function
- * @inode: inode to mark
- * @flags: what kind of dirty (i.e. I_DIRTY_SYNC)
- * Mark an inode as dirty. Callers should use mark_inode_dirty or
- * mark_inode_dirty_sync.
- *
- * Put the inode on the super block's dirty list.
- *
- * CAREFUL! We mark it dirty unconditionally, but move it onto the
- * dirty list only if it is hashed or if it refers to a blockdev.
- * If it was not hashed, it will never be added to the dirty list
- * even if it is later hashed, as it will have been marked dirty already.
- *
- * In short, make sure you hash any inodes _before_ you start marking
- * them dirty.
- *
- * This function *must* be atomic for the I_DIRTY_PAGES case -
- * set_page_dirty() is called under spinlock in several places.
- *
- * Note that for blockdevs, inode->dirtied_when represents the dirtying time of
- * the block-special inode (/dev/hda1) itself. And the ->dirtied_when field of
- * the kernel-internal blockdev inode represents the dirtying time of the
- * blockdev's pages. This is why for I_DIRTY_PAGES we always use
- * page->mapping->host, so the page-dirtying time is recorded in the internal
- * blockdev inode.
- */
-void __mark_inode_dirty(struct inode *inode, int flags)
+static void wb_work_complete(struct bdi_work *work)
{
- struct super_block *sb = inode->i_sb;
+ const enum writeback_sync_modes sync_mode = work->sync_mode;
/*
- * Don't do this for I_DIRTY_PAGES - that doesn't actually
- * dirty the inode itself
+ * For allocated work, we can clear the done/seen bit right here.
+ * For on-stack work, we need to postpone both the clear and free
+ * to after the RCU grace period, since the stack could be invalidated
+ * as soon as bdi_work_clear() has done the wakeup.
*/
- if (flags & (I_DIRTY_SYNC | I_DIRTY_DATASYNC)) {
- if (sb->s_op->dirty_inode)
- sb->s_op->dirty_inode(inode);
- }
+ if (!bdi_work_on_stack(work))
+ bdi_work_clear(work);
+ if (sync_mode == WB_SYNC_NONE || bdi_work_on_stack(work))
+ call_rcu(&work->rcu_head, bdi_work_free);
+}
+static void wb_clear_pending(struct bdi_writeback *wb, struct bdi_work *work)
+{
/*
- * make sure that changes are seen by all cpus before we test i_state
- * -- mikulas
+ * The caller has retrieved the work arguments from this work,
+ * drop our reference. If this is the last ref, delete and free it
*/
- smp_mb();
+ if (atomic_dec_and_test(&work->pending)) {
+ struct backing_dev_info *bdi = wb->bdi;
- /* avoid the locking if we can */
- if ((inode->i_state & flags) == flags)
- return;
+ spin_lock(&bdi->wb_lock);
+ list_del_rcu(&work->list);
+ spin_unlock(&bdi->wb_lock);
- if (unlikely(block_dump))
- block_dump___mark_inode_dirty(inode);
-
- spin_lock(&inode_lock);
- if ((inode->i_state & flags) != flags) {
- const int was_dirty = inode->i_state & I_DIRTY;
+ wb_work_complete(work);
+ }
+}
- inode->i_state |= flags;
+static void bdi_queue_work(struct backing_dev_info *bdi, struct bdi_work *work)
+{
+ if (work) {
+ work->seen = bdi->wb_mask;
+ BUG_ON(!work->seen);
+ atomic_set(&work->pending, bdi->wb_cnt);
+ BUG_ON(!bdi->wb_cnt);
/*
- * If the inode is being synced, just update its dirty state.
- * The unlocker will place the inode on the appropriate
- * superblock list, based upon its state.
+ * Make sure stores are seen before it appears on the list
*/
- if (inode->i_state & I_SYNC)
- goto out;
+ smp_mb();
- /*
- * Only add valid (hashed) inodes to the superblock's
- * dirty list. Add blockdev inodes as well.
- */
- if (!S_ISBLK(inode->i_mode)) {
- if (hlist_unhashed(&inode->i_hash))
- goto out;
- }
- if (inode->i_state & (I_FREEING|I_CLEAR))
- goto out;
+ spin_lock(&bdi->wb_lock);
+ list_add_tail_rcu(&work->list, &bdi->work_list);
+ spin_unlock(&bdi->wb_lock);
+ }
+
+ /*
+ * If the default thread isn't there, make sure we add it. When
+ * it gets created and wakes up, we'll run this work.
+ */
+ if (unlikely(list_empty_careful(&bdi->wb_list)))
+ wake_up_process(default_backing_dev_info.wb.task);
+ else {
+ struct bdi_writeback *wb = &bdi->wb;
/*
- * If the inode was already on s_dirty/s_io/s_more_io, don't
- * reposition it (that would break s_dirty time-ordering).
+ * If we failed allocating the bdi work item, wake up the wb
+ * thread always. As a safety precaution, it'll flush out
+ * everything
*/
- if (!was_dirty) {
- inode->dirtied_when = jiffies;
- list_move(&inode->i_list, &sb->s_dirty);
- }
+ if (!wb_has_dirty_io(wb)) {
+ if (work)
+ wb_clear_pending(wb, work);
+ } else if (wb->task)
+ wake_up_process(wb->task);
}
-out:
- spin_unlock(&inode_lock);
}
-EXPORT_SYMBOL(__mark_inode_dirty);
+/*
+ * Used for on-stack allocated work items. The caller needs to wait until
+ * the wb threads have acked the work before it's safe to continue.
+ */
+static void bdi_wait_on_work_clear(struct bdi_work *work)
+{
+ wait_on_bit(&work->state, WS_USED_B, bdi_sched_wait,
+ TASK_UNINTERRUPTIBLE);
+}
-static int write_inode(struct inode *inode, int sync)
+static struct bdi_work *bdi_alloc_work(struct writeback_control *wbc)
{
- if (inode->i_sb->s_op->write_inode && !is_bad_inode(inode))
- return inode->i_sb->s_op->write_inode(inode, sync);
- return 0;
+ struct bdi_work *work;
+
+ work = kmalloc(sizeof(*work), GFP_ATOMIC);
+ if (work)
+ bdi_work_init(work, wbc);
+
+ return work;
+}
+
+void bdi_start_writeback(struct writeback_control *wbc)
+{
+ const bool must_wait = wbc->sync_mode == WB_SYNC_ALL;
+ struct bdi_work work_stack, *work = NULL;
+
+ if (!must_wait)
+ work = bdi_alloc_work(wbc);
+
+ if (!work) {
+ work = &work_stack;
+ bdi_work_init_on_stack(work, wbc);
+ }
+
+ bdi_queue_work(wbc->bdi, work);
+
+ /*
+ * If the sync mode is WB_SYNC_ALL, block waiting for the work to
+ * complete. If not, we only need to wait for the work to be started,
+ * if we allocated it on-stack. We use the same mechanism, if the
+ * wait bit is set in the bdi_work struct, then threads will not
+ * clear pending until after they are done.
+ *
+ * Note that work == &work_stack if must_wait is true, so we don't
+ * need to do call_rcu() here ever, since the completion path will
+ * have done that for us.
+ */
+ if (must_wait || work == &work_stack) {
+ bdi_wait_on_work_clear(work);
+ if (work != &work_stack)
+ call_rcu(&work->rcu_head, bdi_work_free);
+ }
}
/*
* furthest end of its superblock's dirty-inode list.
*
* Before stamping the inode's ->dirtied_when, we check to see whether it is
- * already the most-recently-dirtied inode on the s_dirty list. If that is
+ * already the most-recently-dirtied inode on the b_dirty list. If that is
* the case then the inode must have been redirtied while it was being written
* out and we don't reset its dirtied_when.
*/
static void redirty_tail(struct inode *inode)
{
- struct super_block *sb = inode->i_sb;
+ struct bdi_writeback *wb = &inode_to_bdi(inode)->wb;
- if (!list_empty(&sb->s_dirty)) {
- struct inode *tail_inode;
+ if (!list_empty(&wb->b_dirty)) {
+ struct inode *tail;
- tail_inode = list_entry(sb->s_dirty.next, struct inode, i_list);
- if (time_before(inode->dirtied_when,
- tail_inode->dirtied_when))
+ tail = list_entry(wb->b_dirty.next, struct inode, i_list);
+ if (time_before(inode->dirtied_when, tail->dirtied_when))
inode->dirtied_when = jiffies;
}
- list_move(&inode->i_list, &sb->s_dirty);
+ list_move(&inode->i_list, &wb->b_dirty);
}
/*
- * requeue inode for re-scanning after sb->s_io list is exhausted.
+ * requeue inode for re-scanning after bdi->b_io list is exhausted.
*/
static void requeue_io(struct inode *inode)
{
- list_move(&inode->i_list, &inode->i_sb->s_more_io);
+ struct bdi_writeback *wb = &inode_to_bdi(inode)->wb;
+
+ list_move(&inode->i_list, &wb->b_more_io);
}
static void inode_sync_complete(struct inode *inode)
/*
* Queue all expired dirty inodes for io, eldest first.
*/
-static void queue_io(struct super_block *sb,
- unsigned long *older_than_this)
+static void queue_io(struct bdi_writeback *wb, unsigned long *older_than_this)
{
- list_splice_init(&sb->s_more_io, sb->s_io.prev);
- move_expired_inodes(&sb->s_dirty, &sb->s_io, older_than_this);
+ list_splice_init(&wb->b_more_io, wb->b_io.prev);
+ move_expired_inodes(&wb->b_dirty, &wb->b_io, older_than_this);
}
-int sb_has_dirty_inodes(struct super_block *sb)
+static int write_inode(struct inode *inode, int sync)
{
- return !list_empty(&sb->s_dirty) ||
- !list_empty(&sb->s_io) ||
- !list_empty(&sb->s_more_io);
+ if (inode->i_sb->s_op->write_inode && !is_bad_inode(inode))
+ return inode->i_sb->s_op->write_inode(inode, sync);
+ return 0;
}
-EXPORT_SYMBOL(sb_has_dirty_inodes);
/*
* Wait for writeback on an inode to complete.
if (inode->i_state & I_SYNC) {
/*
* If this inode is locked for writeback and we are not doing
- * writeback-for-data-integrity, move it to s_more_io so that
+ * writeback-for-data-integrity, move it to b_more_io so that
* writeback can proceed with the other inodes on s_io.
*
* We'll have another go at writing back this inode when we
- * completed a full scan of s_io.
+ * completed a full scan of b_io.
*/
if (!wait) {
requeue_io(inode);
/*
* We didn't write back all the pages. nfs_writepages()
* sometimes bales out without doing anything. Redirty
- * the inode; Move it from s_io onto s_more_io/s_dirty.
+ * the inode; Move it from b_io onto b_more_io/b_dirty.
*/
/*
* akpm: if the caller was the kupdate function we put
- * this inode at the head of s_dirty so it gets first
+ * this inode at the head of b_dirty so it gets first
* consideration. Otherwise, move it to the tail, for
* the reasons described there. I'm not really sure
* how much sense this makes. Presumably I had a good
if (wbc->for_kupdate) {
/*
* For the kupdate function we move the inode
- * to s_more_io so it will get more writeout as
+ * to b_more_io so it will get more writeout as
* soon as the queue becomes uncongested.
*/
inode->i_state |= I_DIRTY_PAGES;
}
/*
- * Write out a superblock's list of dirty inodes. A wait will be performed
- * upon no inodes, all inodes or the final one, depending upon sync_mode.
- *
- * If older_than_this is non-NULL, then only write out inodes which
- * had their first dirtying at a time earlier than *older_than_this.
- *
- * If we're a pdflush thread, then implement pdflush collision avoidance
- * against the entire list.
+ * For WB_SYNC_NONE writeback, the caller does not have the sb pinned
+ * before calling writeback. So make sure that we do pin it, so it doesn't
+ * go away while we are writing inodes from it.
*
- * If `bdi' is non-zero then we're being asked to writeback a specific queue.
- * This function assumes that the blockdev superblock's inodes are backed by
- * a variety of queues, so all inodes are searched. For other superblocks,
- * assume that all inodes are backed by the same queue.
- *
- * FIXME: this linear search could get expensive with many fileystems. But
- * how to fix? We need to go from an address_space to all inodes which share
- * a queue with that address_space. (Easy: have a global "dirty superblocks"
- * list).
- *
- * The inodes to be written are parked on sb->s_io. They are moved back onto
- * sb->s_dirty as they are selected for writing. This way, none can be missed
- * on the writer throttling path, and we get decent balancing between many
- * throttled threads: we don't want them all piling up on inode_sync_wait.
+ * Returns 0 if the super was successfully pinned (or pinning wasn't needed),
+ * 1 if we failed.
*/
-void generic_sync_sb_inodes(struct super_block *sb,
+static int pin_sb_for_writeback(struct writeback_control *wbc,
+ struct inode *inode)
+{
+ struct super_block *sb = inode->i_sb;
+
+ /*
+ * Caller must already hold the ref for this
+ */
+ if (wbc->sync_mode == WB_SYNC_ALL) {
+ WARN_ON(!rwsem_is_locked(&sb->s_umount));
+ return 0;
+ }
+
+ spin_lock(&sb_lock);
+ sb->s_count++;
+ if (down_read_trylock(&sb->s_umount)) {
+ if (sb->s_root) {
+ spin_unlock(&sb_lock);
+ return 0;
+ }
+ /*
+ * umounted, drop rwsem again and fall through to failure
+ */
+ up_read(&sb->s_umount);
+ }
+
+ sb->s_count--;
+ spin_unlock(&sb_lock);
+ return 1;
+}
+
+static void unpin_sb_for_writeback(struct writeback_control *wbc,
+ struct inode *inode)
+{
+ struct super_block *sb = inode->i_sb;
+
+ if (wbc->sync_mode == WB_SYNC_ALL)
+ return;
+
+ up_read(&sb->s_umount);
+ put_super(sb);
+}
+
+static void writeback_inodes_wb(struct bdi_writeback *wb,
struct writeback_control *wbc)
{
+ struct super_block *sb = wbc->sb;
+ const int is_blkdev_sb = sb_is_blkdev_sb(sb);
const unsigned long start = jiffies; /* livelock avoidance */
- int sync = wbc->sync_mode == WB_SYNC_ALL;
spin_lock(&inode_lock);
- if (!wbc->for_kupdate || list_empty(&sb->s_io))
- queue_io(sb, wbc->older_than_this);
- while (!list_empty(&sb->s_io)) {
- struct inode *inode = list_entry(sb->s_io.prev,
+ if (!wbc->for_kupdate || list_empty(&wb->b_io))
+ queue_io(wb, wbc->older_than_this);
+
+ while (!list_empty(&wb->b_io)) {
+ struct inode *inode = list_entry(wb->b_io.prev,
struct inode, i_list);
- struct address_space *mapping = inode->i_mapping;
- struct backing_dev_info *bdi = mapping->backing_dev_info;
long pages_skipped;
- if (!bdi_cap_writeback_dirty(bdi)) {
+ /*
+ * super block given and doesn't match, skip this inode
+ */
+ if (sb && sb != inode->i_sb) {
+ redirty_tail(inode);
+ continue;
+ }
+
+ if (!bdi_cap_writeback_dirty(wb->bdi)) {
redirty_tail(inode);
- if (sb_is_blkdev_sb(sb)) {
+ if (is_blkdev_sb) {
/*
* Dirty memory-backed blockdev: the ramdisk
* driver does this. Skip just this inode
continue;
}
- if (wbc->nonblocking && bdi_write_congested(bdi)) {
+ if (wbc->nonblocking && bdi_write_congested(wb->bdi)) {
wbc->encountered_congestion = 1;
- if (!sb_is_blkdev_sb(sb))
+ if (!is_blkdev_sb)
break; /* Skip a congested fs */
requeue_io(inode);
continue; /* Skip a congested blockdev */
}
- if (wbc->bdi && bdi != wbc->bdi) {
- if (!sb_is_blkdev_sb(sb))
- break; /* fs has the wrong queue */
- requeue_io(inode);
- continue; /* blockdev has wrong queue */
- }
-
/*
* Was this inode dirtied after sync_sb_inodes was called?
* This keeps sync from extra jobs and livelock.
if (inode_dirtied_after(inode, start))
break;
- /* Is another pdflush already flushing this queue? */
- if (current_is_pdflush() && !writeback_acquire(bdi))
- break;
+ if (pin_sb_for_writeback(wbc, inode)) {
+ requeue_io(inode);
+ continue;
+ }
BUG_ON(inode->i_state & (I_FREEING | I_CLEAR));
__iget(inode);
pages_skipped = wbc->pages_skipped;
writeback_single_inode(inode, wbc);
- if (current_is_pdflush())
- writeback_release(bdi);
+ unpin_sb_for_writeback(wbc, inode);
if (wbc->pages_skipped != pages_skipped) {
/*
* writeback is not making progress due to locked
wbc->more_io = 1;
break;
}
- if (!list_empty(&sb->s_more_io))
+ if (!list_empty(&wb->b_more_io))
wbc->more_io = 1;
}
- if (sync) {
- struct inode *inode, *old_inode = NULL;
+ spin_unlock(&inode_lock);
+ /* Leave any unwritten inodes on b_io */
+}
+
+void writeback_inodes_wbc(struct writeback_control *wbc)
+{
+ struct backing_dev_info *bdi = wbc->bdi;
+ writeback_inodes_wb(&bdi->wb, wbc);
+}
+
+/*
+ * The maximum number of pages to writeout in a single bdi flush/kupdate
+ * operation. We do this so we don't hold I_SYNC against an inode for
+ * enormous amounts of time, which would block a userspace task which has
+ * been forced to throttle against that inode. Also, the code reevaluates
+ * the dirty each time it has written this many pages.
+ */
+#define MAX_WRITEBACK_PAGES 1024
+
+static inline bool over_bground_thresh(void)
+{
+ unsigned long background_thresh, dirty_thresh;
+
+ get_dirty_limits(&background_thresh, &dirty_thresh, NULL, NULL);
+
+ return (global_page_state(NR_FILE_DIRTY) +
+ global_page_state(NR_UNSTABLE_NFS) >= background_thresh);
+}
+
+/*
+ * Explicit flushing or periodic writeback of "old" data.
+ *
+ * Define "old": the first time one of an inode's pages is dirtied, we mark the
+ * dirtying-time in the inode's address_space. So this periodic writeback code
+ * just walks the superblock inode list, writing back any inodes which are
+ * older than a specific point in time.
+ *
+ * Try to run once per dirty_writeback_interval. But if a writeback event
+ * takes longer than a dirty_writeback_interval interval, then leave a
+ * one-second gap.
+ *
+ * older_than_this takes precedence over nr_to_write. So we'll only write back
+ * all dirty pages if they are all attached to "old" mappings.
+ */
+static long wb_writeback(struct bdi_writeback *wb, long nr_pages,
+ struct super_block *sb,
+ enum writeback_sync_modes sync_mode, int for_kupdate)
+{
+ struct writeback_control wbc = {
+ .bdi = wb->bdi,
+ .sb = sb,
+ .sync_mode = sync_mode,
+ .older_than_this = NULL,
+ .for_kupdate = for_kupdate,
+ .range_cyclic = 1,
+ };
+ unsigned long oldest_jif;
+ long wrote = 0;
+
+ if (wbc.for_kupdate) {
+ wbc.older_than_this = &oldest_jif;
+ oldest_jif = jiffies -
+ msecs_to_jiffies(dirty_expire_interval * 10);
+ }
+
+ for (;;) {
/*
- * Data integrity sync. Must wait for all pages under writeback,
- * because there may have been pages dirtied before our sync
- * call, but which had writeout started before we write it out.
- * In which case, the inode may not be on the dirty list, but
- * we still have to wait for that writeout.
+ * Don't flush anything for non-integrity writeback where
+ * no nr_pages was given
*/
- list_for_each_entry(inode, &sb->s_inodes, i_sb_list) {
- struct address_space *mapping;
+ if (!for_kupdate && nr_pages <= 0 && sync_mode == WB_SYNC_NONE)
+ break;
- if (inode->i_state &
- (I_FREEING|I_CLEAR|I_WILL_FREE|I_NEW))
- continue;
- mapping = inode->i_mapping;
- if (mapping->nrpages == 0)
+ /*
+ * If no specific pages were given and this is just a
+ * periodic background writeout and we are below the
+ * background dirty threshold, don't do anything
+ */
+ if (for_kupdate && nr_pages <= 0 && !over_bground_thresh())
+ break;
+
+ wbc.more_io = 0;
+ wbc.encountered_congestion = 0;
+ wbc.nr_to_write = MAX_WRITEBACK_PAGES;
+ wbc.pages_skipped = 0;
+ writeback_inodes_wb(wb, &wbc);
+ nr_pages -= MAX_WRITEBACK_PAGES - wbc.nr_to_write;
+ wrote += MAX_WRITEBACK_PAGES - wbc.nr_to_write;
+
+ /*
+ * If we ran out of stuff to write, bail unless more_io got set
+ */
+ if (wbc.nr_to_write > 0 || wbc.pages_skipped > 0) {
+ if (wbc.more_io && !wbc.for_kupdate)
continue;
- __iget(inode);
- spin_unlock(&inode_lock);
+ break;
+ }
+ }
+
+ return wrote;
+}
+
+/*
+ * Return the next bdi_work struct that hasn't been processed by this
+ * wb thread yet
+ */
+static struct bdi_work *get_next_work_item(struct backing_dev_info *bdi,
+ struct bdi_writeback *wb)
+{
+ struct bdi_work *work, *ret = NULL;
+
+ rcu_read_lock();
+
+ list_for_each_entry_rcu(work, &bdi->work_list, list) {
+ if (!test_and_clear_bit(wb->nr, &work->seen))
+ continue;
+
+ ret = work;
+ break;
+ }
+
+ rcu_read_unlock();
+ return ret;
+}
+
+static long wb_check_old_data_flush(struct bdi_writeback *wb)
+{
+ unsigned long expired;
+ long nr_pages;
+
+ expired = wb->last_old_flush +
+ msecs_to_jiffies(dirty_writeback_interval * 10);
+ if (time_before(jiffies, expired))
+ return 0;
+
+ wb->last_old_flush = jiffies;
+ nr_pages = global_page_state(NR_FILE_DIRTY) +
+ global_page_state(NR_UNSTABLE_NFS) +
+ (inodes_stat.nr_inodes - inodes_stat.nr_unused);
+
+ if (nr_pages)
+ return wb_writeback(wb, nr_pages, NULL, WB_SYNC_NONE, 1);
+
+ return 0;
+}
+
+/*
+ * Retrieve work items and do the writeback they describe
+ */
+long wb_do_writeback(struct bdi_writeback *wb, int force_wait)
+{
+ struct backing_dev_info *bdi = wb->bdi;
+ struct bdi_work *work;
+ long nr_pages, wrote = 0;
+
+ while ((work = get_next_work_item(bdi, wb)) != NULL) {
+ enum writeback_sync_modes sync_mode;
+
+ nr_pages = work->nr_pages;
+
+ /*
+ * Override sync mode, in case we must wait for completion
+ */
+ if (force_wait)
+ work->sync_mode = sync_mode = WB_SYNC_ALL;
+ else
+ sync_mode = work->sync_mode;
+
+ /*
+ * If this isn't a data integrity operation, just notify
+ * that we have seen this work and we are now starting it.
+ */
+ if (sync_mode == WB_SYNC_NONE)
+ wb_clear_pending(wb, work);
+
+ wrote += wb_writeback(wb, nr_pages, work->sb, sync_mode, 0);
+
+ /*
+ * This is a data integrity writeback, so only do the
+ * notification when we have completed the work.
+ */
+ if (sync_mode == WB_SYNC_ALL)
+ wb_clear_pending(wb, work);
+ }
+
+ /*
+ * Check for periodic writeback, kupdated() style
+ */
+ wrote += wb_check_old_data_flush(wb);
+
+ return wrote;
+}
+
+/*
+ * Handle writeback of dirty data for the device backed by this bdi. Also
+ * wakes up periodically and does kupdated style flushing.
+ */
+int bdi_writeback_task(struct bdi_writeback *wb)
+{
+ unsigned long last_active = jiffies;
+ unsigned long wait_jiffies = -1UL;
+ long pages_written;
+
+ while (!kthread_should_stop()) {
+ pages_written = wb_do_writeback(wb, 0);
+
+ if (pages_written)
+ last_active = jiffies;
+ else if (wait_jiffies != -1UL) {
+ unsigned long max_idle;
+
/*
- * We hold a reference to 'inode' so it couldn't have
- * been removed from s_inodes list while we dropped the
- * inode_lock. We cannot iput the inode now as we can
- * be holding the last reference and we cannot iput it
- * under inode_lock. So we keep the reference and iput
- * it later.
+ * Longest period of inactivity that we tolerate. If we
+ * see dirty data again later, the task will get
+ * recreated automatically.
*/
- iput(old_inode);
- old_inode = inode;
+ max_idle = max(5UL * 60 * HZ, wait_jiffies);
+ if (time_after(jiffies, max_idle + last_active))
+ break;
+ }
- filemap_fdatawait(mapping);
+ wait_jiffies = msecs_to_jiffies(dirty_writeback_interval * 10);
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(wait_jiffies);
+ try_to_freeze();
+ }
- cond_resched();
+ return 0;
+}
+
+/*
+ * Schedule writeback for all backing devices. Expensive! If this is a data
+ * integrity operation, writeback will be complete when this returns. If
+ * we are simply called for WB_SYNC_NONE, then writeback will merely be
+ * scheduled to run.
+ */
+static void bdi_writeback_all(struct writeback_control *wbc)
+{
+ const bool must_wait = wbc->sync_mode == WB_SYNC_ALL;
+ struct backing_dev_info *bdi;
+ struct bdi_work *work;
+ LIST_HEAD(list);
+
+restart:
+ spin_lock(&bdi_lock);
+
+ list_for_each_entry(bdi, &bdi_list, bdi_list) {
+ struct bdi_work *work;
- spin_lock(&inode_lock);
+ if (!bdi_has_dirty_io(bdi))
+ continue;
+
+ /*
+ * If work allocation fails, do the writes inline. We drop
+ * the lock and restart the list writeout. This should be OK,
+ * since this happens rarely and because the writeout should
+ * eventually make more free memory available.
+ */
+ work = bdi_alloc_work(wbc);
+ if (!work) {
+ struct writeback_control __wbc;
+
+ /*
+ * Not a data integrity writeout, just continue
+ */
+ if (!must_wait)
+ continue;
+
+ spin_unlock(&bdi_lock);
+ __wbc = *wbc;
+ __wbc.bdi = bdi;
+ writeback_inodes_wbc(&__wbc);
+ goto restart;
}
- spin_unlock(&inode_lock);
- iput(old_inode);
- } else
- spin_unlock(&inode_lock);
+ if (must_wait)
+ list_add_tail(&work->wait_list, &list);
+
+ bdi_queue_work(bdi, work);
+ }
+
+ spin_unlock(&bdi_lock);
- return; /* Leave any unwritten inodes on s_io */
+ /*
+ * If this is for WB_SYNC_ALL, wait for pending work to complete
+ * before returning.
+ */
+ while (!list_empty(&list)) {
+ work = list_entry(list.next, struct bdi_work, wait_list);
+ list_del(&work->wait_list);
+ bdi_wait_on_work_clear(work);
+ call_rcu(&work->rcu_head, bdi_work_free);
+ }
}
-EXPORT_SYMBOL_GPL(generic_sync_sb_inodes);
-static void sync_sb_inodes(struct super_block *sb,
- struct writeback_control *wbc)
+/*
+ * Start writeback of `nr_pages' pages. If `nr_pages' is zero, write back
+ * the whole world.
+ */
+void wakeup_flusher_threads(long nr_pages)
{
- generic_sync_sb_inodes(sb, wbc);
+ struct writeback_control wbc = {
+ .sync_mode = WB_SYNC_NONE,
+ .older_than_this = NULL,
+ .range_cyclic = 1,
+ };
+
+ if (nr_pages == 0)
+ nr_pages = global_page_state(NR_FILE_DIRTY) +
+ global_page_state(NR_UNSTABLE_NFS);
+ wbc.nr_to_write = nr_pages;
+ bdi_writeback_all(&wbc);
}
-/*
- * Start writeback of dirty pagecache data against all unlocked inodes.
+static noinline void block_dump___mark_inode_dirty(struct inode *inode)
+{
+ if (inode->i_ino || strcmp(inode->i_sb->s_id, "bdev")) {
+ struct dentry *dentry;
+ const char *name = "?";
+
+ dentry = d_find_alias(inode);
+ if (dentry) {
+ spin_lock(&dentry->d_lock);
+ name = (const char *) dentry->d_name.name;
+ }
+ printk(KERN_DEBUG
+ "%s(%d): dirtied inode %lu (%s) on %s\n",
+ current->comm, task_pid_nr(current), inode->i_ino,
+ name, inode->i_sb->s_id);
+ if (dentry) {
+ spin_unlock(&dentry->d_lock);
+ dput(dentry);
+ }
+ }
+}
+
+/**
+ * __mark_inode_dirty - internal function
+ * @inode: inode to mark
+ * @flags: what kind of dirty (i.e. I_DIRTY_SYNC)
+ * Mark an inode as dirty. Callers should use mark_inode_dirty or
+ * mark_inode_dirty_sync.
*
- * Note:
- * We don't need to grab a reference to superblock here. If it has non-empty
- * ->s_dirty it's hadn't been killed yet and kill_super() won't proceed
- * past sync_inodes_sb() until the ->s_dirty/s_io/s_more_io lists are all
- * empty. Since __sync_single_inode() regains inode_lock before it finally moves
- * inode from superblock lists we are OK.
+ * Put the inode on the super block's dirty list.
+ *
+ * CAREFUL! We mark it dirty unconditionally, but move it onto the
+ * dirty list only if it is hashed or if it refers to a blockdev.
+ * If it was not hashed, it will never be added to the dirty list
+ * even if it is later hashed, as it will have been marked dirty already.
*
- * If `older_than_this' is non-zero then only flush inodes which have a
- * flushtime older than *older_than_this.
+ * In short, make sure you hash any inodes _before_ you start marking
+ * them dirty.
*
- * If `bdi' is non-zero then we will scan the first inode against each
- * superblock until we find the matching ones. One group will be the dirty
- * inodes against a filesystem. Then when we hit the dummy blockdev superblock,
- * sync_sb_inodes will seekout the blockdev which matches `bdi'. Maybe not
- * super-efficient but we're about to do a ton of I/O...
+ * This function *must* be atomic for the I_DIRTY_PAGES case -
+ * set_page_dirty() is called under spinlock in several places.
+ *
+ * Note that for blockdevs, inode->dirtied_when represents the dirtying time of
+ * the block-special inode (/dev/hda1) itself. And the ->dirtied_when field of
+ * the kernel-internal blockdev inode represents the dirtying time of the
+ * blockdev's pages. This is why for I_DIRTY_PAGES we always use
+ * page->mapping->host, so the page-dirtying time is recorded in the internal
+ * blockdev inode.
*/
-void
-writeback_inodes(struct writeback_control *wbc)
+void __mark_inode_dirty(struct inode *inode, int flags)
{
- struct super_block *sb;
+ struct super_block *sb = inode->i_sb;
- might_sleep();
- spin_lock(&sb_lock);
-restart:
- list_for_each_entry_reverse(sb, &super_blocks, s_list) {
- if (sb_has_dirty_inodes(sb)) {
- /* we're making our own get_super here */
- sb->s_count++;
- spin_unlock(&sb_lock);
- /*
- * If we can't get the readlock, there's no sense in
- * waiting around, most of the time the FS is going to
- * be unmounted by the time it is released.
- */
- if (down_read_trylock(&sb->s_umount)) {
- if (sb->s_root)
- sync_sb_inodes(sb, wbc);
- up_read(&sb->s_umount);
+ /*
+ * Don't do this for I_DIRTY_PAGES - that doesn't actually
+ * dirty the inode itself
+ */
+ if (flags & (I_DIRTY_SYNC | I_DIRTY_DATASYNC)) {
+ if (sb->s_op->dirty_inode)
+ sb->s_op->dirty_inode(inode);
+ }
+
+ /*
+ * make sure that changes are seen by all cpus before we test i_state
+ * -- mikulas
+ */
+ smp_mb();
+
+ /* avoid the locking if we can */
+ if ((inode->i_state & flags) == flags)
+ return;
+
+ if (unlikely(block_dump))
+ block_dump___mark_inode_dirty(inode);
+
+ spin_lock(&inode_lock);
+ if ((inode->i_state & flags) != flags) {
+ const int was_dirty = inode->i_state & I_DIRTY;
+
+ inode->i_state |= flags;
+
+ /*
+ * If the inode is being synced, just update its dirty state.
+ * The unlocker will place the inode on the appropriate
+ * superblock list, based upon its state.
+ */
+ if (inode->i_state & I_SYNC)
+ goto out;
+
+ /*
+ * Only add valid (hashed) inodes to the superblock's
+ * dirty list. Add blockdev inodes as well.
+ */
+ if (!S_ISBLK(inode->i_mode)) {
+ if (hlist_unhashed(&inode->i_hash))
+ goto out;
+ }
+ if (inode->i_state & (I_FREEING|I_CLEAR))
+ goto out;
+
+ /*
+ * If the inode was already on b_dirty/b_io/b_more_io, don't
+ * reposition it (that would break b_dirty time-ordering).
+ */
+ if (!was_dirty) {
+ struct bdi_writeback *wb = &inode_to_bdi(inode)->wb;
+ struct backing_dev_info *bdi = wb->bdi;
+
+ if (bdi_cap_writeback_dirty(bdi) &&
+ !test_bit(BDI_registered, &bdi->state)) {
+ WARN_ON(1);
+ printk(KERN_ERR "bdi-%s not registered\n",
+ bdi->name);
}
- spin_lock(&sb_lock);
- if (__put_super_and_need_restart(sb))
- goto restart;
+
+ inode->dirtied_when = jiffies;
+ list_move(&inode->i_list, &wb->b_dirty);
}
- if (wbc->nr_to_write <= 0)
- break;
}
- spin_unlock(&sb_lock);
+out:
+ spin_unlock(&inode_lock);
}
+EXPORT_SYMBOL(__mark_inode_dirty);
/*
- * writeback and wait upon the filesystem's dirty inodes. The caller will
- * do this in two passes - one to write, and one to wait.
+ * Write out a superblock's list of dirty inodes. A wait will be performed
+ * upon no inodes, all inodes or the final one, depending upon sync_mode.
+ *
+ * If older_than_this is non-NULL, then only write out inodes which
+ * had their first dirtying at a time earlier than *older_than_this.
*
- * A finite limit is set on the number of pages which will be written.
- * To prevent infinite livelock of sys_sync().
+ * If we're a pdlfush thread, then implement pdflush collision avoidance
+ * against the entire list.
*
- * We add in the number of potentially dirty inodes, because each inode write
- * can dirty pagecache in the underlying blockdev.
+ * If `bdi' is non-zero then we're being asked to writeback a specific queue.
+ * This function assumes that the blockdev superblock's inodes are backed by
+ * a variety of queues, so all inodes are searched. For other superblocks,
+ * assume that all inodes are backed by the same queue.
+ *
+ * The inodes to be written are parked on bdi->b_io. They are moved back onto
+ * bdi->b_dirty as they are selected for writing. This way, none can be missed
+ * on the writer throttling path, and we get decent balancing between many
+ * throttled threads: we don't want them all piling up on inode_sync_wait.
*/
-void sync_inodes_sb(struct super_block *sb, int wait)
+static void wait_sb_inodes(struct writeback_control *wbc)
+{
+ struct inode *inode, *old_inode = NULL;
+
+ /*
+ * We need to be protected against the filesystem going from
+ * r/o to r/w or vice versa.
+ */
+ WARN_ON(!rwsem_is_locked(&wbc->sb->s_umount));
+
+ spin_lock(&inode_lock);
+
+ /*
+ * Data integrity sync. Must wait for all pages under writeback,
+ * because there may have been pages dirtied before our sync
+ * call, but which had writeout started before we write it out.
+ * In which case, the inode may not be on the dirty list, but
+ * we still have to wait for that writeout.
+ */
+ list_for_each_entry(inode, &wbc->sb->s_inodes, i_sb_list) {
+ struct address_space *mapping;
+
+ if (inode->i_state & (I_FREEING|I_CLEAR|I_WILL_FREE|I_NEW))
+ continue;
+ mapping = inode->i_mapping;
+ if (mapping->nrpages == 0)
+ continue;
+ __iget(inode);
+ spin_unlock(&inode_lock);
+ /*
+ * We hold a reference to 'inode' so it couldn't have
+ * been removed from s_inodes list while we dropped the
+ * inode_lock. We cannot iput the inode now as we can
+ * be holding the last reference and we cannot iput it
+ * under inode_lock. So we keep the reference and iput
+ * it later.
+ */
+ iput(old_inode);
+ old_inode = inode;
+
+ filemap_fdatawait(mapping);
+
+ cond_resched();
+
+ spin_lock(&inode_lock);
+ }
+ spin_unlock(&inode_lock);
+ iput(old_inode);
+}
+
+/**
+ * writeback_inodes_sb - writeback dirty inodes from given super_block
+ * @sb: the superblock
+ *
+ * Start writeback on some inodes on this super_block. No guarantees are made
+ * on how many (if any) will be written, and this function does not wait
+ * for IO completion of submitted IO. The number of pages submitted is
+ * returned.
+ */
+long writeback_inodes_sb(struct super_block *sb)
{
struct writeback_control wbc = {
- .sync_mode = wait ? WB_SYNC_ALL : WB_SYNC_NONE,
+ .sb = sb,
+ .sync_mode = WB_SYNC_NONE,
.range_start = 0,
.range_end = LLONG_MAX,
};
+ unsigned long nr_dirty = global_page_state(NR_FILE_DIRTY);
+ unsigned long nr_unstable = global_page_state(NR_UNSTABLE_NFS);
+ long nr_to_write;
- if (!wait) {
- unsigned long nr_dirty = global_page_state(NR_FILE_DIRTY);
- unsigned long nr_unstable = global_page_state(NR_UNSTABLE_NFS);
-
- wbc.nr_to_write = nr_dirty + nr_unstable +
+ nr_to_write = nr_dirty + nr_unstable +
(inodes_stat.nr_inodes - inodes_stat.nr_unused);
- } else
- wbc.nr_to_write = LONG_MAX; /* doesn't actually matter */
- sync_sb_inodes(sb, &wbc);
+ wbc.nr_to_write = nr_to_write;
+ bdi_writeback_all(&wbc);
+ return nr_to_write - wbc.nr_to_write;
+}
+EXPORT_SYMBOL(writeback_inodes_sb);
+
+/**
+ * sync_inodes_sb - sync sb inode pages
+ * @sb: the superblock
+ *
+ * This function writes and waits on any dirty inode belonging to this
+ * super_block. The number of pages synced is returned.
+ */
+long sync_inodes_sb(struct super_block *sb)
+{
+ struct writeback_control wbc = {
+ .sb = sb,
+ .sync_mode = WB_SYNC_ALL,
+ .range_start = 0,
+ .range_end = LLONG_MAX,
+ };
+ long nr_to_write = LONG_MAX; /* doesn't actually matter */
+
+ wbc.nr_to_write = nr_to_write;
+ bdi_writeback_all(&wbc);
+ wait_sb_inodes(&wbc);
+ return nr_to_write - wbc.nr_to_write;
}
+EXPORT_SYMBOL(sync_inodes_sb);
/**
* write_inode_now - write an inode to disk
{
int err;
+ fc->bdi.name = "fuse";
fc->bdi.ra_pages = (VM_MAX_READAHEAD * 1024) / PAGE_CACHE_SIZE;
fc->bdi.unplug_io_fn = default_unplug_io_fn;
/* fuse does it's own writeback accounting */
{
struct gfs2_inode *ip = GFS2_I(mapping->host);
struct gfs2_sbd *sdp = GFS2_SB(mapping->host);
+ struct gfs2_inode *m_ip = GFS2_I(sdp->sd_statfs_inode);
unsigned int data_blocks = 0, ind_blocks = 0, rblocks;
int alloc_required;
int error = 0;
error = gfs2_glock_nq(&ip->i_gh);
if (unlikely(error))
goto out_uninit;
+ if (&ip->i_inode == sdp->sd_rindex) {
+ error = gfs2_glock_nq_init(m_ip->i_gl, LM_ST_EXCLUSIVE,
+ GL_NOCACHE, &m_ip->i_gh);
+ if (unlikely(error)) {
+ gfs2_glock_dq(&ip->i_gh);
+ goto out_uninit;
+ }
+ }
error = gfs2_write_alloc_required(ip, pos, len, &alloc_required);
if (error)
rblocks += data_blocks ? data_blocks : 1;
if (ind_blocks || data_blocks)
rblocks += RES_STATFS + RES_QUOTA;
+ if (&ip->i_inode == sdp->sd_rindex)
+ rblocks += 2 * RES_STATFS;
error = gfs2_trans_begin(sdp, rblocks,
PAGE_CACHE_SIZE/sdp->sd_sb.sb_bsize);
gfs2_alloc_put(ip);
}
out_unlock:
+ if (&ip->i_inode == sdp->sd_rindex) {
+ gfs2_glock_dq(&m_ip->i_gh);
+ gfs2_holder_uninit(&m_ip->i_gh);
+ }
gfs2_glock_dq(&ip->i_gh);
out_uninit:
gfs2_holder_uninit(&ip->i_gh);
static void adjust_fs_space(struct inode *inode)
{
struct gfs2_sbd *sdp = inode->i_sb->s_fs_info;
+ struct gfs2_inode *m_ip = GFS2_I(sdp->sd_statfs_inode);
+ struct gfs2_inode *l_ip = GFS2_I(sdp->sd_sc_inode);
struct gfs2_statfs_change_host *m_sc = &sdp->sd_statfs_master;
struct gfs2_statfs_change_host *l_sc = &sdp->sd_statfs_local;
+ struct buffer_head *m_bh, *l_bh;
u64 fs_total, new_free;
/* Total up the file system space, according to the latest rindex. */
fs_total = gfs2_ri_total(sdp);
+ if (gfs2_meta_inode_buffer(m_ip, &m_bh) != 0)
+ return;
spin_lock(&sdp->sd_statfs_spin);
+ gfs2_statfs_change_in(m_sc, m_bh->b_data +
+ sizeof(struct gfs2_dinode));
if (fs_total > (m_sc->sc_total + l_sc->sc_total))
new_free = fs_total - (m_sc->sc_total + l_sc->sc_total);
else
fs_warn(sdp, "File system extended by %llu blocks.\n",
(unsigned long long)new_free);
gfs2_statfs_change(sdp, new_free, new_free, 0);
+
+ if (gfs2_meta_inode_buffer(l_ip, &l_bh) != 0)
+ goto out;
+ update_statfs(sdp, m_bh, l_bh);
+ brelse(l_bh);
+out:
+ brelse(m_bh);
}
/**
{
struct gfs2_inode *ip = GFS2_I(inode);
struct gfs2_sbd *sdp = GFS2_SB(inode);
+ struct gfs2_inode *m_ip = GFS2_I(sdp->sd_statfs_inode);
u64 to = pos + copied;
void *kaddr;
unsigned char *buf = dibh->b_data + sizeof(struct gfs2_dinode);
brelse(dibh);
gfs2_trans_end(sdp);
+ if (inode == sdp->sd_rindex) {
+ gfs2_glock_dq(&m_ip->i_gh);
+ gfs2_holder_uninit(&m_ip->i_gh);
+ }
gfs2_glock_dq(&ip->i_gh);
gfs2_holder_uninit(&ip->i_gh);
return copied;
struct inode *inode = page->mapping->host;
struct gfs2_inode *ip = GFS2_I(inode);
struct gfs2_sbd *sdp = GFS2_SB(inode);
+ struct gfs2_inode *m_ip = GFS2_I(sdp->sd_statfs_inode);
struct buffer_head *dibh;
struct gfs2_alloc *al = ip->i_alloc;
unsigned int from = pos & (PAGE_CACHE_SIZE - 1);
gfs2_quota_unlock(ip);
gfs2_alloc_put(ip);
}
+ if (inode == sdp->sd_rindex) {
+ gfs2_glock_dq(&m_ip->i_gh);
+ gfs2_holder_uninit(&m_ip->i_gh);
+ }
gfs2_glock_dq(&ip->i_gh);
gfs2_holder_uninit(&ip->i_gh);
return ret;
static DECLARE_RWSEM(gfs2_umount_flush_sem);
static struct dentry *gfs2_root;
static struct workqueue_struct *glock_workqueue;
+struct workqueue_struct *gfs2_delete_workqueue;
static LIST_HEAD(lru_list);
static atomic_t lru_count = ATOMIC_INIT(0);
static DEFINE_SPINLOCK(lru_lock);
*
*/
-static void gfs2_glock_hold(struct gfs2_glock *gl)
+void gfs2_glock_hold(struct gfs2_glock *gl)
{
GLOCK_BUG_ON(gl, atomic_read(&gl->gl_ref) == 0);
atomic_inc(&gl->gl_ref);
}
+/**
+ * demote_ok - Check to see if it's ok to unlock a glock
+ * @gl: the glock
+ *
+ * Returns: 1 if it's ok
+ */
+
+static int demote_ok(const struct gfs2_glock *gl)
+{
+ const struct gfs2_glock_operations *glops = gl->gl_ops;
+
+ if (gl->gl_state == LM_ST_UNLOCKED)
+ return 0;
+ if (!list_empty(&gl->gl_holders))
+ return 0;
+ if (glops->go_demote_ok)
+ return glops->go_demote_ok(gl);
+ return 1;
+}
+
/**
* gfs2_glock_schedule_for_reclaim - Add a glock to the reclaim list
* @gl: the glock
static void gfs2_glock_schedule_for_reclaim(struct gfs2_glock *gl)
{
+ int may_reclaim;
+ may_reclaim = (demote_ok(gl) &&
+ (atomic_read(&gl->gl_ref) == 1 ||
+ (gl->gl_name.ln_type == LM_TYPE_INODE &&
+ atomic_read(&gl->gl_ref) <= 2)));
spin_lock(&lru_lock);
- if (list_empty(&gl->gl_lru) && gl->gl_state != LM_ST_UNLOCKED) {
+ if (list_empty(&gl->gl_lru) && may_reclaim) {
list_add_tail(&gl->gl_lru, &lru_list);
atomic_inc(&lru_count);
}
spin_unlock(&lru_lock);
}
+/**
+ * gfs2_glock_put_nolock() - Decrement reference count on glock
+ * @gl: The glock to put
+ *
+ * This function should only be used if the caller has its own reference
+ * to the glock, in addition to the one it is dropping.
+ */
+
+void gfs2_glock_put_nolock(struct gfs2_glock *gl)
+{
+ if (atomic_dec_and_test(&gl->gl_ref))
+ GLOCK_BUG_ON(gl, 1);
+ gfs2_glock_schedule_for_reclaim(gl);
+}
+
/**
* gfs2_glock_put() - Decrement reference count on glock
* @gl: The glock to put
rv = 1;
goto out;
}
- /* 1 for being hashed, 1 for having state != LM_ST_UNLOCKED */
- if (atomic_read(&gl->gl_ref) == 2)
- gfs2_glock_schedule_for_reclaim(gl);
+ spin_lock(&gl->gl_spin);
+ gfs2_glock_schedule_for_reclaim(gl);
+ spin_unlock(&gl->gl_spin);
write_unlock(gl_lock_addr(gl->gl_hash));
out:
return rv;
if (held2)
gfs2_glock_hold(gl);
else
- gfs2_glock_put(gl);
+ gfs2_glock_put_nolock(gl);
}
gl->gl_state = new_state;
out_sched:
gfs2_glock_hold(gl);
if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
- gfs2_glock_put(gl);
+ gfs2_glock_put_nolock(gl);
out_unlock:
clear_bit(GLF_LOCK, &gl->gl_flags);
goto out;
}
+static void delete_work_func(struct work_struct *work)
+{
+ struct gfs2_glock *gl = container_of(work, struct gfs2_glock, gl_delete);
+ struct gfs2_sbd *sdp = gl->gl_sbd;
+ struct gfs2_inode *ip = NULL;
+ struct inode *inode;
+ u64 no_addr = 0;
+
+ spin_lock(&gl->gl_spin);
+ ip = (struct gfs2_inode *)gl->gl_object;
+ if (ip)
+ no_addr = ip->i_no_addr;
+ spin_unlock(&gl->gl_spin);
+ if (ip) {
+ inode = gfs2_ilookup(sdp->sd_vfs, no_addr);
+ if (inode) {
+ d_prune_aliases(inode);
+ iput(inode);
+ }
+ }
+ gfs2_glock_put(gl);
+}
+
static void glock_work_func(struct work_struct *work)
{
unsigned long delay = 0;
gl->gl_sbd = sdp;
gl->gl_aspace = NULL;
INIT_DELAYED_WORK(&gl->gl_work, glock_work_func);
+ INIT_WORK(&gl->gl_delete, delete_work_func);
/* If this glock protects actual on-disk data or metadata blocks,
create a VFS inode to manage the pages/buffers holding them. */
gl->gl_demote_state != state) {
gl->gl_demote_state = LM_ST_UNLOCKED;
}
+ if (gl->gl_ops->go_callback)
+ gl->gl_ops->go_callback(gl);
trace_gfs2_demote_rq(gl);
}
gfs2_glock_put(gl);
}
-/**
- * demote_ok - Check to see if it's ok to unlock a glock
- * @gl: the glock
- *
- * Returns: 1 if it's ok
- */
-
-static int demote_ok(const struct gfs2_glock *gl)
-{
- const struct gfs2_glock_operations *glops = gl->gl_ops;
-
- if (gl->gl_state == LM_ST_UNLOCKED)
- return 0;
- if (!list_empty(&gl->gl_holders))
- return 0;
- if (glops->go_demote_ok)
- return glops->go_demote_ok(gl);
- return 1;
-}
-
static int gfs2_shrink_glock_memory(int nr, gfp_t gfp_mask)
{
struct gfs2_glock *gl;
int may_demote;
int nr_skipped = 0;
- int got_ref = 0;
LIST_HEAD(skipped);
if (nr == 0)
list_del_init(&gl->gl_lru);
atomic_dec(&lru_count);
+ /* Check if glock is about to be freed */
+ if (atomic_read(&gl->gl_ref) == 0)
+ continue;
+
/* Test for being demotable */
if (!test_and_set_bit(GLF_LOCK, &gl->gl_flags)) {
gfs2_glock_hold(gl);
- got_ref = 1;
spin_unlock(&lru_lock);
spin_lock(&gl->gl_spin);
may_demote = demote_ok(gl);
- spin_unlock(&gl->gl_spin);
- clear_bit(GLF_LOCK, &gl->gl_flags);
if (may_demote) {
handle_callback(gl, LM_ST_UNLOCKED, 0);
nr--;
- if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
- gfs2_glock_put(gl);
- got_ref = 0;
}
+ if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
+ gfs2_glock_put_nolock(gl);
+ spin_unlock(&gl->gl_spin);
+ clear_bit(GLF_LOCK, &gl->gl_flags);
spin_lock(&lru_lock);
- if (may_demote)
- continue;
- }
- if (list_empty(&gl->gl_lru) &&
- (atomic_read(&gl->gl_ref) <= (2 + got_ref))) {
- nr_skipped++;
- list_add(&gl->gl_lru, &skipped);
- }
- if (got_ref) {
- spin_unlock(&lru_lock);
- gfs2_glock_put(gl);
- spin_lock(&lru_lock);
- got_ref = 0;
+ continue;
}
+ nr_skipped++;
+ list_add(&gl->gl_lru, &skipped);
}
list_splice(&skipped, &lru_list);
atomic_add(nr_skipped, &lru_count);
glock_workqueue = create_workqueue("glock_workqueue");
if (IS_ERR(glock_workqueue))
return PTR_ERR(glock_workqueue);
+ gfs2_delete_workqueue = create_workqueue("delete_workqueue");
+ if (IS_ERR(gfs2_delete_workqueue)) {
+ destroy_workqueue(glock_workqueue);
+ return PTR_ERR(gfs2_delete_workqueue);
+ }
register_shrinker(&glock_shrinker);
{
unregister_shrinker(&glock_shrinker);
destroy_workqueue(glock_workqueue);
+ destroy_workqueue(gfs2_delete_workqueue);
}
static int gfs2_glock_iter_next(struct gfs2_glock_iter *gi)
#define GLR_TRYFAILED 13
+extern struct workqueue_struct *gfs2_delete_workqueue;
static inline struct gfs2_holder *gfs2_glock_is_locked_by_me(struct gfs2_glock *gl)
{
struct gfs2_holder *gh;
int gfs2_glock_get(struct gfs2_sbd *sdp,
u64 number, const struct gfs2_glock_operations *glops,
int create, struct gfs2_glock **glp);
+void gfs2_glock_hold(struct gfs2_glock *gl);
+void gfs2_glock_put_nolock(struct gfs2_glock *gl);
int gfs2_glock_put(struct gfs2_glock *gl);
void gfs2_holder_init(struct gfs2_glock *gl, unsigned int state, unsigned flags,
struct gfs2_holder *gh);
if (gl->gl_state != LM_ST_UNLOCKED &&
test_bit(SDF_JOURNAL_LIVE, &sdp->sd_flags)) {
+ flush_workqueue(gfs2_delete_workqueue);
gfs2_meta_syncfs(sdp);
gfs2_log_shutdown(sdp);
}
return 0;
}
+/**
+ * iopen_go_callback - schedule the dcache entry for the inode to be deleted
+ * @gl: the glock
+ *
+ * gl_spin lock is held while calling this
+ */
+static void iopen_go_callback(struct gfs2_glock *gl)
+{
+ struct gfs2_inode *ip = (struct gfs2_inode *)gl->gl_object;
+
+ if (gl->gl_demote_state == LM_ST_UNLOCKED &&
+ gl->gl_state == LM_ST_SHARED &&
+ ip && test_bit(GIF_USER, &ip->i_flags)) {
+ gfs2_glock_hold(gl);
+ if (queue_work(gfs2_delete_workqueue, &gl->gl_delete) == 0)
+ gfs2_glock_put_nolock(gl);
+ }
+}
+
const struct gfs2_glock_operations gfs2_meta_glops = {
.go_type = LM_TYPE_META,
};
const struct gfs2_glock_operations gfs2_iopen_glops = {
.go_type = LM_TYPE_IOPEN,
+ .go_callback = iopen_go_callback,
};
const struct gfs2_glock_operations gfs2_flock_glops = {
int (*go_lock) (struct gfs2_holder *gh);
void (*go_unlock) (struct gfs2_holder *gh);
int (*go_dump)(struct seq_file *seq, const struct gfs2_glock *gl);
+ void (*go_callback) (struct gfs2_glock *gl);
const int go_type;
const unsigned long go_min_hold_time;
};
struct list_head gl_ail_list;
atomic_t gl_ail_count;
struct delayed_work gl_work;
+ struct work_struct gl_delete;
};
#define GFS2_MIN_LVB_SIZE 32 /* Min size of LVB that gfs2 supports */
}
tmp = rgd->rd_data - rgd->rd_free - rgd->rd_dinodes;
- if (count[1] + count[2] != tmp) {
+ if (count[1] != tmp) {
if (gfs2_consist_rgrpd(rgd))
fs_err(sdp, "used data mismatch: %u != %u\n",
count[1], tmp);
return;
}
- if (count[3] != rgd->rd_dinodes) {
+ if (count[2] + count[3] != rgd->rd_dinodes) {
if (gfs2_consist_rgrpd(rgd))
fs_err(sdp, "used metadata mismatch: %u != %u\n",
- count[3], rgd->rd_dinodes);
+ count[2] + count[3], rgd->rd_dinodes);
return;
}
-
- if (count[2] > count[3]) {
- if (gfs2_consist_rgrpd(rgd))
- fs_err(sdp, "unlinked inodes > inodes: %u\n",
- count[2]);
- return;
- }
-
}
static inline int rgrp_contains_block(struct gfs2_rgrpd *rgd, u64 block)
* Returns: The inode, if one has been found
*/
-static struct inode *try_rgrp_unlink(struct gfs2_rgrpd *rgd, u64 *last_unlinked)
+static struct inode *try_rgrp_unlink(struct gfs2_rgrpd *rgd, u64 *last_unlinked,
+ u64 skip)
{
struct inode *inode;
u32 goal = 0, block;
goal++;
if (*last_unlinked != NO_BLOCK && no_addr <= *last_unlinked)
continue;
+ if (no_addr == skip)
+ continue;
*last_unlinked = no_addr;
inode = gfs2_inode_lookup(rgd->rd_sbd->sd_vfs, DT_UNKNOWN,
no_addr, -1, 1);
if (try_rgrp_fit(rgd, al))
goto out;
if (rgd->rd_flags & GFS2_RDF_CHECK)
- inode = try_rgrp_unlink(rgd, last_unlinked);
+ inode = try_rgrp_unlink(rgd, last_unlinked, ip->i_no_addr);
if (!rg_locked)
gfs2_glock_dq_uninit(&al->al_rgd_gh);
if (inode)
if (try_rgrp_fit(rgd, al))
goto out;
if (rgd->rd_flags & GFS2_RDF_CHECK)
- inode = try_rgrp_unlink(rgd, last_unlinked);
+ inode = try_rgrp_unlink(rgd, last_unlinked, ip->i_no_addr);
if (!rg_locked)
gfs2_glock_dq_uninit(&al->al_rgd_gh);
if (inode)
return error;
}
-static void gfs2_statfs_change_in(struct gfs2_statfs_change_host *sc, const void *buf)
+void gfs2_statfs_change_in(struct gfs2_statfs_change_host *sc, const void *buf)
{
const struct gfs2_statfs_change *str = buf;
brelse(l_bh);
}
+void update_statfs(struct gfs2_sbd *sdp, struct buffer_head *m_bh,
+ struct buffer_head *l_bh)
+{
+ struct gfs2_inode *m_ip = GFS2_I(sdp->sd_statfs_inode);
+ struct gfs2_inode *l_ip = GFS2_I(sdp->sd_sc_inode);
+ struct gfs2_statfs_change_host *m_sc = &sdp->sd_statfs_master;
+ struct gfs2_statfs_change_host *l_sc = &sdp->sd_statfs_local;
+
+ gfs2_trans_add_bh(l_ip->i_gl, l_bh, 1);
+
+ spin_lock(&sdp->sd_statfs_spin);
+ m_sc->sc_total += l_sc->sc_total;
+ m_sc->sc_free += l_sc->sc_free;
+ m_sc->sc_dinodes += l_sc->sc_dinodes;
+ memset(l_sc, 0, sizeof(struct gfs2_statfs_change));
+ memset(l_bh->b_data + sizeof(struct gfs2_dinode),
+ 0, sizeof(struct gfs2_statfs_change));
+ spin_unlock(&sdp->sd_statfs_spin);
+
+ gfs2_trans_add_bh(m_ip->i_gl, m_bh, 1);
+ gfs2_statfs_change_out(m_sc, m_bh->b_data + sizeof(struct gfs2_dinode));
+}
+
int gfs2_statfs_sync(struct gfs2_sbd *sdp)
{
struct gfs2_inode *m_ip = GFS2_I(sdp->sd_statfs_inode);
if (error)
goto out_bh2;
- gfs2_trans_add_bh(l_ip->i_gl, l_bh, 1);
-
- spin_lock(&sdp->sd_statfs_spin);
- m_sc->sc_total += l_sc->sc_total;
- m_sc->sc_free += l_sc->sc_free;
- m_sc->sc_dinodes += l_sc->sc_dinodes;
- memset(l_sc, 0, sizeof(struct gfs2_statfs_change));
- memset(l_bh->b_data + sizeof(struct gfs2_dinode),
- 0, sizeof(struct gfs2_statfs_change));
- spin_unlock(&sdp->sd_statfs_spin);
-
- gfs2_trans_add_bh(m_ip->i_gl, m_bh, 1);
- gfs2_statfs_change_out(m_sc, m_bh->b_data + sizeof(struct gfs2_dinode));
+ update_statfs(sdp, m_bh, l_bh);
gfs2_trans_end(sdp);
struct gfs2_holder t_gh;
int error;
+ flush_workqueue(gfs2_delete_workqueue);
gfs2_quota_sync(sdp);
gfs2_statfs_sync(sdp);
extern int gfs2_statfs_init(struct gfs2_sbd *sdp);
extern void gfs2_statfs_change(struct gfs2_sbd *sdp, s64 total, s64 free,
s64 dinodes);
+extern void gfs2_statfs_change_in(struct gfs2_statfs_change_host *sc,
+ const void *buf);
+extern void update_statfs(struct gfs2_sbd *sdp, struct buffer_head *m_bh,
+ struct buffer_head *l_bh);
extern int gfs2_statfs_sync(struct gfs2_sbd *sdp);
extern int gfs2_freeze_fs(struct gfs2_sbd *sdp);
#define GDLM_ATTR(_name,_mode,_show,_store) \
static struct gfs2_attr gdlm_attr_##_name = __ATTR(_name,_mode,_show,_store)
-GDLM_ATTR(proto_name, 0444, proto_name_show, NULL);
-GDLM_ATTR(block, 0644, block_show, block_store);
-GDLM_ATTR(withdraw, 0644, withdraw_show, withdraw_store);
-GDLM_ATTR(id, 0444, lkid_show, NULL);
-GDLM_ATTR(jid, 0444, jid_show, NULL);
-GDLM_ATTR(first, 0444, lkfirst_show, NULL);
-GDLM_ATTR(first_done, 0444, first_done_show, NULL);
-GDLM_ATTR(recover, 0200, NULL, recover_store);
-GDLM_ATTR(recover_done, 0444, recover_done_show, NULL);
-GDLM_ATTR(recover_status, 0444, recover_status_show, NULL);
+GDLM_ATTR(proto_name, 0444, proto_name_show, NULL);
+GDLM_ATTR(block, 0644, block_show, block_store);
+GDLM_ATTR(withdraw, 0644, withdraw_show, withdraw_store);
+GDLM_ATTR(id, 0444, lkid_show, NULL);
+GDLM_ATTR(jid, 0444, jid_show, NULL);
+GDLM_ATTR(first, 0444, lkfirst_show, NULL);
+GDLM_ATTR(first_done, 0444, first_done_show, NULL);
+GDLM_ATTR(recover, 0600, NULL, recover_store);
+GDLM_ATTR(recover_done, 0444, recover_done_show, NULL);
+GDLM_ATTR(recover_status, 0444, recover_status_show, NULL);
static struct attribute *lock_module_attrs[] = {
&gdlm_attr_proto_name.attr,
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM gfs2
+
#if !defined(_TRACE_GFS2_H) || defined(TRACE_HEADER_MULTI_READ)
#define _TRACE_GFS2_H
#include <linux/tracepoint.h>
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM gfs2
-#define TRACE_INCLUDE_FILE trace_gfs2
-
#include <linux/fs.h>
#include <linux/buffer_head.h>
#include <linux/dlmconstants.h>
/* This part must be outside protection */
#undef TRACE_INCLUDE_PATH
#define TRACE_INCLUDE_PATH .
+#define TRACE_INCLUDE_FILE trace_gfs2
#include <trace/define_trace.h>
static const struct inode_operations hugetlbfs_inode_operations;
static struct backing_dev_info hugetlbfs_backing_dev_info = {
+ .name = "hugetlbfs",
.ra_pages = 0, /* No readahead */
.capabilities = BDI_CAP_NO_ACCT_AND_WRITEBACK,
};
return capable(CAP_IPC_LOCK) || in_group_p(sysctl_hugetlb_shm_group);
}
-struct file *hugetlb_file_setup(const char *name, size_t size, int acctflag)
+struct file *hugetlb_file_setup(const char *name, size_t size, int acctflag,
+ struct user_struct **user)
{
int error = -ENOMEM;
- int unlock_shm = 0;
struct file *file;
struct inode *inode;
struct dentry *dentry, *root;
struct qstr quick_string;
- struct user_struct *user = current_user();
+ *user = NULL;
if (!hugetlbfs_vfsmount)
return ERR_PTR(-ENOENT);
if (!can_do_hugetlb_shm()) {
- if (user_shm_lock(size, user)) {
- unlock_shm = 1;
+ *user = current_user();
+ if (user_shm_lock(size, *user)) {
WARN_ONCE(1,
"Using mlock ulimits for SHM_HUGETLB deprecated\n");
- } else
+ } else {
+ *user = NULL;
return ERR_PTR(-EPERM);
+ }
}
root = hugetlbfs_vfsmount->mnt_root;
out_dentry:
dput(dentry);
out_shm_unlock:
- if (unlock_shm)
- user_shm_unlock(size, user);
+ if (*user) {
+ user_shm_unlock(size, *user);
+ *user = NULL;
+ }
return ERR_PTR(error);
}
* These are initializations that need to be done on every inode
* allocation as the fields are not initialised by slab allocation.
*/
-struct inode *inode_init_always(struct super_block *sb, struct inode *inode)
+int inode_init_always(struct super_block *sb, struct inode *inode)
{
static const struct address_space_operations empty_aops;
static struct inode_operations empty_iops;
static const struct file_operations empty_fops;
-
struct address_space *const mapping = &inode->i_data;
inode->i_sb = sb;
inode->dirtied_when = 0;
if (security_inode_alloc(inode))
- goto out_free_inode;
+ goto out;
/* allocate and initialize an i_integrity */
if (ima_inode_alloc(inode))
inode->i_fsnotify_mask = 0;
#endif
- return inode;
+ return 0;
out_free_security:
security_inode_free(inode);
-out_free_inode:
- if (inode->i_sb->s_op->destroy_inode)
- inode->i_sb->s_op->destroy_inode(inode);
- else
- kmem_cache_free(inode_cachep, (inode));
- return NULL;
+out:
+ return -ENOMEM;
}
EXPORT_SYMBOL(inode_init_always);
else
inode = kmem_cache_alloc(inode_cachep, GFP_KERNEL);
- if (inode)
- return inode_init_always(sb, inode);
- return NULL;
+ if (!inode)
+ return NULL;
+
+ if (unlikely(inode_init_always(sb, inode))) {
+ if (inode->i_sb->s_op->destroy_inode)
+ inode->i_sb->s_op->destroy_inode(inode);
+ else
+ kmem_cache_free(inode_cachep, inode);
+ return NULL;
+ }
+
+ return inode;
}
-void destroy_inode(struct inode *inode)
+void __destroy_inode(struct inode *inode)
{
BUG_ON(inode_has_buffers(inode));
ima_inode_free(inode);
if (inode->i_default_acl && inode->i_default_acl != ACL_NOT_CACHED)
posix_acl_release(inode->i_default_acl);
#endif
+}
+EXPORT_SYMBOL(__destroy_inode);
+
+void destroy_inode(struct inode *inode)
+{
+ __destroy_inode(inode);
if (inode->i_sb->s_op->destroy_inode)
inode->i_sb->s_op->destroy_inode(inode);
else
kmem_cache_free(inode_cachep, (inode));
}
-EXPORT_SYMBOL(destroy_inode);
-
/*
* These are initializations that only need to be done
struct page *new_page;
unsigned int new_offset;
struct buffer_head *bh_in = jh2bh(jh_in);
+ journal_t *journal = transaction->t_journal;
/*
* The buffer really shouldn't be locked: only the current committing
J_ASSERT_BH(bh_in, buffer_jbddirty(bh_in));
new_bh = alloc_buffer_head(GFP_NOFS|__GFP_NOFAIL);
+ /* keep subsequent assertions sane */
+ new_bh->b_state = 0;
+ init_buffer(new_bh, NULL, NULL);
+ atomic_set(&new_bh->b_count, 1);
+ new_jh = journal_add_journal_head(new_bh); /* This sleeps */
/*
* If a new transaction has already done a buffer copy-out, then
kunmap_atomic(mapped_data, KM_USER0);
}
- /* keep subsequent assertions sane */
- new_bh->b_state = 0;
- init_buffer(new_bh, NULL, NULL);
- atomic_set(&new_bh->b_count, 1);
- jbd_unlock_bh_state(bh_in);
-
- new_jh = journal_add_journal_head(new_bh); /* This sleeps */
-
set_bh_page(new_bh, new_page, new_offset);
new_jh->b_transaction = NULL;
new_bh->b_size = jh2bh(jh_in)->b_size;
* copying is moved to the transaction's shadow queue.
*/
JBUFFER_TRACE(jh_in, "file as BJ_Shadow");
- journal_file_buffer(jh_in, transaction, BJ_Shadow);
+ spin_lock(&journal->j_list_lock);
+ __journal_file_buffer(jh_in, transaction, BJ_Shadow);
+ spin_unlock(&journal->j_list_lock);
+ jbd_unlock_bh_state(bh_in);
+
JBUFFER_TRACE(new_jh, "file as BJ_IO");
journal_file_buffer(new_jh, transaction, BJ_IO);
first = be32_to_cpu(sb->s_first);
last = be32_to_cpu(sb->s_maxlen);
+ if (first + JFS_MIN_JOURNAL_BLOCKS > last + 1) {
+ printk(KERN_ERR "JBD: Journal too short (blocks %lu-%lu).\n",
+ first, last);
+ journal_fail_superblock(journal);
+ return -EINVAL;
+ }
journal->j_first = first;
journal->j_last = last;
wake_up(&journal->j_wait_transaction_locked);
}
-/*
- * Report any unexpected dirty buffers which turn up. Normally those
- * indicate an error, but they can occur if the user is running (say)
- * tune2fs to modify the live filesystem, so we need the option of
- * continuing as gracefully as possible. #
- *
- * The caller should already hold the journal lock and
- * j_list_lock spinlock: most callers will need those anyway
- * in order to probe the buffer's journaling state safely.
- */
-static void jbd_unexpected_dirty_buffer(struct journal_head *jh)
+static void warn_dirty_buffer(struct buffer_head *bh)
{
- int jlist;
-
- /* If this buffer is one which might reasonably be dirty
- * --- ie. data, or not part of this journal --- then
- * we're OK to leave it alone, but otherwise we need to
- * move the dirty bit to the journal's own internal
- * JBDDirty bit. */
- jlist = jh->b_jlist;
+ char b[BDEVNAME_SIZE];
- if (jlist == BJ_Metadata || jlist == BJ_Reserved ||
- jlist == BJ_Shadow || jlist == BJ_Forget) {
- struct buffer_head *bh = jh2bh(jh);
-
- if (test_clear_buffer_dirty(bh))
- set_buffer_jbddirty(bh);
- }
+ printk(KERN_WARNING
+ "JBD: Spotted dirty metadata buffer (dev = %s, blocknr = %llu). "
+ "There's a risk of filesystem corruption in case of system "
+ "crash.\n",
+ bdevname(bh->b_bdev, b), (unsigned long long)bh->b_blocknr);
}
/*
if (jh->b_next_transaction)
J_ASSERT_JH(jh, jh->b_next_transaction ==
transaction);
+ warn_dirty_buffer(bh);
}
/*
* In any case we need to clean the dirty flag and we must
* do it under the buffer lock to be sure we don't race
* with running write-out.
*/
- JBUFFER_TRACE(jh, "Unexpected dirty buffer");
- jbd_unexpected_dirty_buffer(jh);
+ JBUFFER_TRACE(jh, "Journalling dirty buffer");
+ clear_buffer_dirty(bh);
+ set_buffer_jbddirty(bh);
}
unlock_buffer(bh);
J_ASSERT_JH(jh, buffer_locked(jh2bh(jh)));
if (jh->b_transaction == NULL) {
+ /*
+ * Previous journal_forget() could have left the buffer
+ * with jbddirty bit set because it was being committed. When
+ * the commit finished, we've filed the buffer for
+ * checkpointing and marked it dirty. Now we are reallocating
+ * the buffer so the transaction freeing it must have
+ * committed and so it's safe to clear the dirty bit.
+ */
+ clear_buffer_dirty(jh2bh(jh));
jh->b_transaction = transaction;
/* first access by this transaction */
if (jh->b_cp_transaction) {
JBUFFER_TRACE(jh, "on running+cp transaction");
+ /*
+ * We don't want to write the buffer anymore, clear the
+ * bit so that we don't confuse checks in
+ * __journal_file_buffer
+ */
+ clear_buffer_dirty(bh);
__journal_file_buffer(jh, transaction, BJ_Forget);
- clear_buffer_jbddirty(bh);
may_free = 0;
} else {
JBUFFER_TRACE(jh, "on running transaction");
if (jh->b_transaction && jh->b_jlist == jlist)
return;
- /* The following list of buffer states needs to be consistent
- * with __jbd_unexpected_dirty_buffer()'s handling of dirty
- * state. */
-
if (jlist == BJ_Metadata || jlist == BJ_Reserved ||
jlist == BJ_Shadow || jlist == BJ_Forget) {
+ /*
+ * For metadata buffers, we track dirty bit in buffer_jbddirty
+ * instead of buffer_dirty. We should not see a dirty bit set
+ * here because we clear it in do_get_write_access but e.g.
+ * tune2fs can modify the sb and set the dirty bit at any time
+ * so we try to gracefully handle that.
+ */
+ if (buffer_dirty(bh))
+ warn_dirty_buffer(bh);
if (test_clear_buffer_dirty(bh) ||
test_clear_buffer_jbddirty(bh))
was_dirty = 1;
return rc;
}
-static int jffs2_check_acl(struct inode *inode, int mask)
+int jffs2_check_acl(struct inode *inode, int mask)
{
struct posix_acl *acl;
int rc;
return -EAGAIN;
}
-int jffs2_permission(struct inode *inode, int mask)
-{
- return generic_permission(inode, mask, jffs2_check_acl);
-}
-
int jffs2_init_acl_pre(struct inode *dir_i, struct inode *inode, int *i_mode)
{
struct posix_acl *acl, *clone;
#ifdef CONFIG_JFFS2_FS_POSIX_ACL
-extern int jffs2_permission(struct inode *, int);
+extern int jffs2_check_acl(struct inode *, int);
extern int jffs2_acl_chmod(struct inode *);
extern int jffs2_init_acl_pre(struct inode *, struct inode *, int *);
extern int jffs2_init_acl_post(struct inode *);
#else
-#define jffs2_permission (NULL)
+#define jffs2_check_acl (NULL)
#define jffs2_acl_chmod(inode) (0)
#define jffs2_init_acl_pre(dir_i,inode,mode) (0)
#define jffs2_init_acl_post(inode) (0)
.rmdir = jffs2_rmdir,
.mknod = jffs2_mknod,
.rename = jffs2_rename,
- .permission = jffs2_permission,
+ .check_acl = jffs2_check_acl,
.setattr = jffs2_setattr,
.setxattr = jffs2_setxattr,
.getxattr = jffs2_getxattr,
const struct inode_operations jffs2_file_inode_operations =
{
- .permission = jffs2_permission,
+ .check_acl = jffs2_check_acl,
.setattr = jffs2_setattr,
.setxattr = jffs2_setxattr,
.getxattr = jffs2_getxattr,
kunmap(pg);
D2(printk(KERN_DEBUG "readpage finished\n"));
- return 0;
+ return ret;
}
int jffs2_do_readpage_unlock(struct inode *inode, struct page *pg)
{
.readlink = generic_readlink,
.follow_link = jffs2_follow_link,
- .permission = jffs2_permission,
+ .check_acl = jffs2_check_acl,
.setattr = jffs2_setattr,
.setxattr = jffs2_setxattr,
.getxattr = jffs2_getxattr,
if (!c->wbuf)
return -ENOMEM;
+#ifdef CONFIG_JFFS2_FS_WBUF_VERIFY
+ c->wbuf_verify = kmalloc(c->wbuf_pagesize, GFP_KERNEL);
+ if (!c->wbuf_verify) {
+ kfree(c->wbuf);
+ return -ENOMEM;
+ }
+#endif
return 0;
}
void jffs2_nor_wbuf_flash_cleanup(struct jffs2_sb_info *c) {
+#ifdef CONFIG_JFFS2_FS_WBUF_VERIFY
+ kfree(c->wbuf_verify);
+#endif
kfree(c->wbuf);
}
acl = posix_acl_from_xattr(value, size);
}
kfree(value);
- if (!IS_ERR(acl)) {
+ if (!IS_ERR(acl))
set_cached_acl(inode, type, acl);
- posix_acl_release(acl);
- }
return acl;
}
return rc;
}
-static int jfs_check_acl(struct inode *inode, int mask)
+int jfs_check_acl(struct inode *inode, int mask)
{
struct posix_acl *acl = jfs_get_acl(inode, ACL_TYPE_ACCESS);
return -EAGAIN;
}
-int jfs_permission(struct inode *inode, int mask)
-{
- return generic_permission(inode, mask, jfs_check_acl);
-}
-
int jfs_init_acl(tid_t tid, struct inode *inode, struct inode *dir)
{
struct posix_acl *acl = NULL;
.removexattr = jfs_removexattr,
#ifdef CONFIG_JFS_POSIX_ACL
.setattr = jfs_setattr,
- .permission = jfs_permission,
+ .check_acl = jfs_check_acl,
#endif
};
#ifdef CONFIG_JFS_POSIX_ACL
-int jfs_permission(struct inode *, int);
+int jfs_check_acl(struct inode *, int);
int jfs_init_acl(tid_t, struct inode *, struct inode *);
int jfs_setattr(struct dentry *, struct iattr *);
.removexattr = jfs_removexattr,
#ifdef CONFIG_JFS_POSIX_ACL
.setattr = jfs_setattr,
- .permission = jfs_permission,
+ .check_acl = jfs_check_acl,
#endif
};
return PTR_ERR(s);
s->s_flags = MS_NOUSER;
- s->s_maxbytes = ~0ULL;
+ s->s_maxbytes = MAX_LFS_FILESIZE;
s->s_blocksize = PAGE_SIZE;
s->s_blocksize_bits = PAGE_SHIFT;
s->s_magic = magic;
if (can_sleep)
lock->fl_flags |= FL_SLEEP;
- error = security_file_lock(filp, cmd);
+ error = security_file_lock(filp, lock->fl_type);
if (error)
goto out_free;
EXPORT_SYMBOL(putname);
#endif
-
-/**
- * generic_permission - check for access rights on a Posix-like filesystem
- * @inode: inode to check access rights for
- * @mask: right to check for (%MAY_READ, %MAY_WRITE, %MAY_EXEC)
- * @check_acl: optional callback to check for Posix ACLs
- *
- * Used to check for read/write/execute permissions on a file.
- * We use "fsuid" for this, letting us set arbitrary permissions
- * for filesystem access without changing the "normal" uids which
- * are used for other things..
+/*
+ * This does basic POSIX ACL permission checking
*/
-int generic_permission(struct inode *inode, int mask,
+static int acl_permission_check(struct inode *inode, int mask,
int (*check_acl)(struct inode *inode, int mask))
{
umode_t mode = inode->i_mode;
else {
if (IS_POSIXACL(inode) && (mode & S_IRWXG) && check_acl) {
int error = check_acl(inode, mask);
- if (error == -EACCES)
- goto check_capabilities;
- else if (error != -EAGAIN)
+ if (error != -EAGAIN)
return error;
}
*/
if ((mask & ~mode) == 0)
return 0;
+ return -EACCES;
+}
+
+/**
+ * generic_permission - check for access rights on a Posix-like filesystem
+ * @inode: inode to check access rights for
+ * @mask: right to check for (%MAY_READ, %MAY_WRITE, %MAY_EXEC)
+ * @check_acl: optional callback to check for Posix ACLs
+ *
+ * Used to check for read/write/execute permissions on a file.
+ * We use "fsuid" for this, letting us set arbitrary permissions
+ * for filesystem access without changing the "normal" uids which
+ * are used for other things..
+ */
+int generic_permission(struct inode *inode, int mask,
+ int (*check_acl)(struct inode *inode, int mask))
+{
+ int ret;
+
+ /*
+ * Do the basic POSIX ACL permission checks.
+ */
+ ret = acl_permission_check(inode, mask, check_acl);
+ if (ret != -EACCES)
+ return ret;
- check_capabilities:
/*
* Read/write DACs are always overridable.
* Executable DACs are overridable if at least one exec bit is set.
if (inode->i_op->permission)
retval = inode->i_op->permission(inode, mask);
else
- retval = generic_permission(inode, mask, NULL);
+ retval = generic_permission(inode, mask, inode->i_op->check_acl);
if (retval)
return retval;
*/
static int exec_permission_lite(struct inode *inode)
{
- umode_t mode = inode->i_mode;
+ int ret;
- if (inode->i_op->permission)
- return -EAGAIN;
-
- if (current_fsuid() == inode->i_uid)
- mode >>= 6;
- else if (in_group_p(inode->i_gid))
- mode >>= 3;
-
- if (mode & MAY_EXEC)
- goto ok;
-
- if ((inode->i_mode & S_IXUGO) && capable(CAP_DAC_OVERRIDE))
- goto ok;
-
- if (S_ISDIR(inode->i_mode) && capable(CAP_DAC_OVERRIDE))
+ if (inode->i_op->permission) {
+ ret = inode->i_op->permission(inode, MAY_EXEC);
+ if (!ret)
+ goto ok;
+ return ret;
+ }
+ ret = acl_permission_check(inode, MAY_EXEC, inode->i_op->check_acl);
+ if (!ret)
goto ok;
- if (S_ISDIR(inode->i_mode) && capable(CAP_DAC_READ_SEARCH))
+ if (capable(CAP_DAC_OVERRIDE) || capable(CAP_DAC_READ_SEARCH))
goto ok;
- return -EACCES;
+ return ret;
ok:
return security_inode_permission(inode, MAY_EXEC);
}
nd->flags |= LOOKUP_CONTINUE;
err = exec_permission_lite(inode);
- if (err == -EAGAIN)
- err = inode_permission(nd->path.dentry->d_inode,
- MAY_EXEC);
- if (!err)
- err = ima_path_check(&nd->path, MAY_EXEC,
- IMA_COUNT_UPDATE);
if (err)
break;
if (error)
return error;
- error = ima_path_check(path,
- acc_mode & (MAY_READ | MAY_WRITE | MAY_EXEC),
+ error = ima_path_check(path, acc_mode ?
+ acc_mode & (MAY_READ | MAY_WRITE | MAY_EXEC) :
+ ACC_MODE(flag) & (MAY_READ | MAY_WRITE),
IMA_COUNT_UPDATE);
+
if (error)
return error;
/*
* An append-only file must be opened in append mode for writing.
*/
if (IS_APPEND(inode)) {
+ error = -EPERM;
if ((flag & FMODE_WRITE) && !(flag & O_APPEND))
- return -EPERM;
+ goto err_out;
if (flag & O_TRUNC)
- return -EPERM;
+ goto err_out;
}
/* O_NOATIME can only be set by the owner or superuser */
if (flag & O_NOATIME)
- if (!is_owner_or_cap(inode))
- return -EPERM;
+ if (!is_owner_or_cap(inode)) {
+ error = -EPERM;
+ goto err_out;
+ }
/*
* Ensure there are no outstanding leases on the file.
*/
error = break_lease(inode, flag);
if (error)
- return error;
+ goto err_out;
if (flag & O_TRUNC) {
error = get_write_access(inode);
if (error)
- return error;
+ goto err_out;
/*
* Refuse to truncate files with mandatory locks held on them.
}
put_write_access(inode);
if (error)
- return error;
+ goto err_out;
} else
if (flag & FMODE_WRITE)
vfs_dq_init(inode);
return 0;
+err_out:
+ ima_counts_put(path, acc_mode ?
+ acc_mode & (MAY_READ | MAY_WRITE | MAY_EXEC) :
+ ACC_MODE(flag) & (MAY_READ | MAY_WRITE));
+ return error;
}
/*
*/
int mnt_want_write_file(struct file *file)
{
- if (!(file->f_mode & FMODE_WRITE))
+ struct inode *inode = file->f_dentry->d_inode;
+ if (!(file->f_mode & FMODE_WRITE) || special_file(inode->i_mode))
return mnt_want_write(file->f_path.mnt);
else
return mnt_clone_write(file->f_path.mnt);
server->rsize = NFS_MAX_FILE_IO_SIZE;
server->rpages = (server->rsize + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
+ server->backing_dev_info.name = "nfs";
server->backing_dev_info.ra_pages = server->rpages * NFS_MAX_READAHEAD;
if (server->wsize > max_rpc_payload)
return error;
}
-/*
- * Initialize a session.
- * Note: save the mount rsize and wsize for create_server negotiation.
- */
-static void nfs4_init_session(struct nfs_client *clp,
- unsigned int wsize, unsigned int rsize)
-{
-#if defined(CONFIG_NFS_V4_1)
- if (nfs4_has_session(clp)) {
- clp->cl_session->fc_attrs.max_rqst_sz = wsize;
- clp->cl_session->fc_attrs.max_resp_sz = rsize;
- }
-#endif /* CONFIG_NFS_V4_1 */
-}
/*
* Session has been established, and the client marked ready.
BUG_ON(!server->nfs_client->rpc_ops);
BUG_ON(!server->nfs_client->rpc_ops->file_inode_ops);
- nfs4_init_session(server->nfs_client, server->wsize, server->rsize);
+ error = nfs4_init_session(server);
+ if (error < 0)
+ goto error;
/* Probe the root fh to retrieve its FSID */
error = nfs4_path_walk(server, mntfh, data->nfs_server.export_path);
res = NULL;
goto out;
/* This turned out not to be a regular file */
- case -EISDIR:
case -ENOTDIR:
goto no_open;
case -ELOOP:
if (!(nd->intent.open.flags & O_NOFOLLOW))
goto no_open;
+ /* case -EISDIR: */
/* case -EINVAL: */
default:
goto out;
if (put_dreq(dreq))
nfs_direct_complete(dreq);
- nfs_readdata_release(calldata);
+ nfs_readdata_free(data);
}
static const struct rpc_call_ops nfs_read_direct_ops = {
data->npages, 1, 0, data->pagevec, NULL);
up_read(¤t->mm->mmap_sem);
if (result < 0) {
- nfs_readdata_release(data);
+ nfs_readdata_free(data);
break;
}
if ((unsigned)result < data->npages) {
bytes = result * PAGE_SIZE;
if (bytes <= pgbase) {
nfs_direct_release_pages(data->pagevec, result);
- nfs_readdata_release(data);
+ nfs_readdata_free(data);
break;
}
bytes -= pgbase;
data->inode = inode;
data->cred = msg.rpc_cred;
data->args.fh = NFS_FH(inode);
- data->args.context = get_nfs_open_context(ctx);
+ data->args.context = ctx;
data->args.offset = pos;
data->args.pgbase = pgbase;
data->args.pages = data->pagevec;
struct nfs_write_data *data = list_entry(dreq->rewrite_list.next, struct nfs_write_data, pages);
list_del(&data->pages);
nfs_direct_release_pages(data->pagevec, data->npages);
- nfs_writedata_release(data);
+ nfs_writedata_free(data);
}
}
dprintk("NFS: %5u commit returned %d\n", data->task.tk_pid, status);
nfs_direct_write_complete(dreq, data->inode);
- nfs_commitdata_release(calldata);
+ nfs_commit_free(data);
}
static const struct rpc_call_ops nfs_commit_direct_ops = {
data->args.fh = NFS_FH(data->inode);
data->args.offset = 0;
data->args.count = 0;
- data->args.context = get_nfs_open_context(dreq->ctx);
+ data->args.context = dreq->ctx;
data->res.count = 0;
data->res.fattr = &data->fattr;
data->res.verf = &data->verf;
data->npages, 0, 0, data->pagevec, NULL);
up_read(¤t->mm->mmap_sem);
if (result < 0) {
- nfs_writedata_release(data);
+ nfs_writedata_free(data);
break;
}
if ((unsigned)result < data->npages) {
bytes = result * PAGE_SIZE;
if (bytes <= pgbase) {
nfs_direct_release_pages(data->pagevec, result);
- nfs_writedata_release(data);
+ nfs_writedata_free(data);
break;
}
bytes -= pgbase;
data->inode = inode;
data->cred = msg.rpc_cred;
data->args.fh = NFS_FH(inode);
- data->args.context = get_nfs_open_context(ctx);
+ data->args.context = ctx;
data->args.offset = pos;
data->args.pgbase = pgbase;
data->args.pages = data->pagevec;
extern struct nfs4_session *nfs4_alloc_session(struct nfs_client *clp);
extern int nfs4_proc_create_session(struct nfs_client *, int reset);
extern int nfs4_proc_destroy_session(struct nfs4_session *);
+extern int nfs4_init_session(struct nfs_server *server);
#else /* CONFIG_NFS_v4_1 */
static inline int nfs4_setup_sequence(struct nfs_client *clp,
struct nfs4_sequence_args *args, struct nfs4_sequence_res *res,
{
return 0;
}
+
+static inline int nfs4_init_session(struct nfs_server *server)
+{
+ return 0;
+}
#endif /* CONFIG_NFS_V4_1 */
extern struct nfs4_state_maintenance_ops *nfs4_state_renewal_ops[];
.rpc_argp = &args,
.rpc_resp = &res,
};
- int status;
nfs_fattr_init(info->fattr);
- status = nfs4_recover_expired_lease(server);
- if (!status)
- status = nfs4_check_client_ready(server->nfs_client);
- if (!status)
- status = nfs4_call_sync(server, &msg, &args, &res, 0);
- return status;
+ return nfs4_call_sync(server, &msg, &args, &res, 0);
}
static int nfs4_lookup_root(struct nfs_server *server, struct nfs_fh *fhandle,
if (request->fl_start < 0 || request->fl_end < 0)
return -EINVAL;
- if (IS_GETLK(cmd))
- return nfs4_proc_getlk(state, F_GETLK, request);
+ if (IS_GETLK(cmd)) {
+ if (state != NULL)
+ return nfs4_proc_getlk(state, F_GETLK, request);
+ return 0;
+ }
if (!(IS_SETLK(cmd) || IS_SETLKW(cmd)))
return -EINVAL;
- if (request->fl_type == F_UNLCK)
- return nfs4_proc_unlck(state, cmd, request);
+ if (request->fl_type == F_UNLCK) {
+ if (state != NULL)
+ return nfs4_proc_unlck(state, cmd, request);
+ return 0;
+ }
+ if (state == NULL)
+ return -ENOLCK;
do {
status = nfs4_proc_setlk(state, cmd, request);
if ((status != -EAGAIN) || IS_SETLK(cmd))
return status;
}
+int nfs4_init_session(struct nfs_server *server)
+{
+ struct nfs_client *clp = server->nfs_client;
+ int ret;
+
+ if (!nfs4_has_session(clp))
+ return 0;
+
+ clp->cl_session->fc_attrs.max_rqst_sz = server->wsize;
+ clp->cl_session->fc_attrs.max_resp_sz = server->rsize;
+ ret = nfs4_recover_expired_lease(server);
+ if (!ret)
+ ret = nfs4_check_client_ready(clp);
+ return ret;
+}
+
/*
* Renew the cl_session lease.
*/
INIT_LIST_HEAD(&lsp->ls_sequence.list);
lsp->ls_seqid.sequence = &lsp->ls_sequence;
atomic_set(&lsp->ls_count, 1);
+ lsp->ls_state = state;
lsp->ls_owner = fl_owner;
spin_lock(&clp->cl_lock);
nfs_alloc_unique_id(&clp->cl_lockowner_id, &lsp->ls_id, 1, 64);
if (lsp != NULL)
break;
if (new != NULL) {
- new->ls_state = state;
list_add(&new->ls_locks, &state->lock_states);
set_bit(LK_STATE_IN_USE, &state->flags);
lsp = new;
continue;
}
/* Initialize or reset the session */
- if (nfs4_has_session(clp) &&
- test_and_clear_bit(NFS4CLNT_SESSION_SETUP, &clp->cl_state)) {
+ if (test_and_clear_bit(NFS4CLNT_SESSION_SETUP, &clp->cl_state)
+ && nfs4_has_session(clp)) {
if (clp->cl_cons_state == NFS_CS_SESSION_INITING)
status = nfs4_initialize_session(clp);
else
return p;
}
-static void nfs_readdata_free(struct nfs_read_data *p)
+void nfs_readdata_free(struct nfs_read_data *p)
{
if (p && (p->pagevec != &p->page_array[0]))
kfree(p->pagevec);
mempool_free(p, nfs_rdata_mempool);
}
-void nfs_readdata_release(void *data)
+static void nfs_readdata_release(struct nfs_read_data *rdata)
{
- struct nfs_read_data *rdata = data;
-
put_nfs_open_context(rdata->args.context);
nfs_readdata_free(rdata);
}
return p;
}
-static void nfs_writedata_free(struct nfs_write_data *p)
+void nfs_writedata_free(struct nfs_write_data *p)
{
if (p && (p->pagevec != &p->page_array[0]))
kfree(p->pagevec);
mempool_free(p, nfs_wdata_mempool);
}
-void nfs_writedata_release(void *data)
+static void nfs_writedata_release(struct nfs_write_data *wdata)
{
- struct nfs_write_data *wdata = data;
-
put_nfs_open_context(wdata->args.context);
nfs_writedata_free(wdata);
}
int flags = nfsexp_flags(rqstp, exp);
int ret;
+ validate_process_creds();
+
/* discard any old override before preparing the new set */
revert_creds(get_cred(current->real_cred));
new = prepare_creds();
else
new->cap_effective = cap_raise_nfsd_set(new->cap_effective,
new->cap_permitted);
+ validate_process_creds();
put_cred(override_creds(new));
put_cred(new);
+ validate_process_creds();
return 0;
oom:
/* Lock the export hash tables for reading. */
exp_readlock();
+ validate_process_creds();
svc_process(rqstp);
+ validate_process_creds();
/* Unlock export hash tables */
exp_readunlock();
__be32 err;
int host_err;
+ validate_process_creds();
+
/*
* If we get here, then the client has already done an "open",
* and (hopefully) checked permission - so allow OWNER_OVERRIDE
out_nfserr:
err = nfserrno(host_err);
out:
+ validate_process_creds();
return err;
}
--- /dev/null
+config NILFS2_FS
+ tristate "NILFS2 file system support (EXPERIMENTAL)"
+ depends on BLOCK && EXPERIMENTAL
+ select CRC32
+ help
+ NILFS2 is a log-structured file system (LFS) supporting continuous
+ snapshotting. In addition to versioning capability of the entire
+ file system, users can even restore files mistakenly overwritten or
+ destroyed just a few seconds ago. Since this file system can keep
+ consistency like conventional LFS, it achieves quick recovery after
+ system crashes.
+
+ NILFS2 creates a number of checkpoints every few seconds or per
+ synchronous write basis (unless there is no change). Users can
+ select significant versions among continuously created checkpoints,
+ and can change them into snapshots which will be preserved for long
+ periods until they are changed back to checkpoints. Each
+ snapshot is mountable as a read-only file system concurrently with
+ its writable mount, and this feature is convenient for online backup.
+
+ Some features including atime, extended attributes, and POSIX ACLs,
+ are not supported yet.
+
+ To compile this file system support as a module, choose M here: the
+ module will be called nilfs2. If unsure, say N.
* We cannot call radix_tree_preload for the kernels older
* than 2.6.23, because it is not exported for modules.
*/
+retry:
err = radix_tree_preload(GFP_NOFS & ~__GFP_HIGHMEM);
if (err)
goto failed_unlock;
(unsigned long long)oldkey,
(unsigned long long)newkey);
-retry:
spin_lock_irq(&btnc->tree_lock);
err = radix_tree_insert(&btnc->page_tree, newkey, obh->b_page);
spin_unlock_irq(&btnc->tree_lock);
return 0; /* Do not request flush for shadow page cache */
if (!sb) {
writer = nilfs_get_writer(NILFS_MDT(inode)->mi_nilfs);
- if (!writer)
+ if (!writer) {
+ nilfs_put_writer(NILFS_MDT(inode)->mi_nilfs);
return -EROFS;
+ }
sb = writer->s_super;
}
if (!page)
return;
- if (buffer_nilfs_node(page_buffers(page)) && !PageWriteback(page))
+ if (buffer_nilfs_node(page_buffers(page)) && !PageWriteback(page)) {
/*
* For b-tree node pages, this function may be called twice
* or more because they might be split in a segment.
*/
+ if (PageDirty(page)) {
+ /*
+ * For pages holding split b-tree node buffers, dirty
+ * flag on the buffers may be cleared discretely.
+ * In that case, the page is once redirtied for
+ * remaining buffers, and it must be cancelled if
+ * all the buffers get cleaned later.
+ */
+ lock_page(page);
+ if (nilfs_page_buffers_clean(page))
+ __nilfs_clear_page_dirty(page);
+ unlock_page(page);
+ }
return;
+ }
__nilfs_end_page_io(page, err);
}
if (unlikely(err))
goto failed;
+ down_read(&nilfs->ns_segctor_sem);
err = nilfs_cpfile_get_checkpoint(nilfs->ns_cpfile, cno, 0, &raw_cp,
&bh_cp);
+ up_read(&nilfs->ns_segctor_sem);
if (unlikely(err)) {
if (err == -ENOENT || err == -EINVAL) {
printk(KERN_ERR
static inline void nilfs_put_sbinfo(struct nilfs_sb_info *sbi)
{
- if (!atomic_dec_and_test(&sbi->s_count))
+ if (atomic_dec_and_test(&sbi->s_count))
kfree(sbi);
}
config FSNOTIFY
- bool "Filesystem notification backend"
- default y
- ---help---
- fsnotify is a backend for filesystem notification. fsnotify does
- not provide any userspace interface but does provide the basis
- needed for other notification schemes such as dnotify, inotify,
- and fanotify.
-
- Say Y here to enable fsnotify suport.
-
- If unsure, say Y.
+ def_bool n
source "fs/notify/dnotify/Kconfig"
source "fs/notify/inotify/Kconfig"
config DNOTIFY
bool "Dnotify support"
- depends on FSNOTIFY
+ select FSNOTIFY
default y
help
Dnotify is a directory-based per-fd file change notification system
if (!group->ops->should_send_event(group, to_tell, mask))
continue;
if (!event) {
- event = fsnotify_create_event(to_tell, mask, data, data_is, file_name, cookie);
+ event = fsnotify_create_event(to_tell, mask, data,
+ data_is, file_name, cookie,
+ GFP_KERNEL);
/* shit, we OOM'd and now we can't tell, maybe
* someday someone else will want to do something
* here */
config INOTIFY_USER
bool "Inotify support for userspace"
- depends on FSNOTIFY
+ select FSNOTIFY
default y
---help---
Say Y here to enable inotify support for userspace, including the
event_priv->wd = wd;
ret = fsnotify_add_notify_event(group, event, fsn_event_priv);
- /* EEXIST is not an error */
- if (ret == -EEXIST)
- ret = 0;
-
- /* did event_priv get attached? */
- if (list_empty(&fsn_event_priv->event_list))
+ if (ret) {
inotify_free_event_priv(fsn_event_priv);
+ /* EEXIST says we tail matched, EOVERFLOW isn't something
+ * to report up the stack. */
+ if ((ret == -EEXIST) ||
+ (ret == -EOVERFLOW))
+ ret = 0;
+ }
/*
* If we hold the entry until after the event is on the queue
return send;
}
+/*
+ * This is NEVER supposed to be called. Inotify marks should either have been
+ * removed from the idr when the watch was removed or in the
+ * fsnotify_destroy_mark_by_group() call when the inotify instance was being
+ * torn down. This is only called if the idr is about to be freed but there
+ * are still marks in it.
+ */
static int idr_callback(int id, void *p, void *data)
{
- BUG();
+ struct fsnotify_mark_entry *entry;
+ struct inotify_inode_mark_entry *ientry;
+ static bool warned = false;
+
+ if (warned)
+ return 0;
+
+ warned = false;
+ entry = p;
+ ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
+
+ WARN(1, "inotify closing but id=%d for entry=%p in group=%p still in "
+ "idr. Probably leaking memory\n", id, p, data);
+
+ /*
+ * I'm taking the liberty of assuming that the mark in question is a
+ * valid address and I'm dereferencing it. This might help to figure
+ * out why we got here and the panic is no worse than the original
+ * BUG() that was here.
+ */
+ if (entry)
+ printk(KERN_WARNING "entry->group=%p inode=%p wd=%d\n",
+ entry->group, entry->inode, ientry->wd);
return 0;
}
static void inotify_free_group_priv(struct fsnotify_group *group)
{
/* ideally the idr is empty and we won't hit the BUG in teh callback */
- idr_for_each(&group->inotify_data.idr, idr_callback, NULL);
+ idr_for_each(&group->inotify_data.idr, idr_callback, group);
idr_remove_all(&group->inotify_data.idr);
idr_destroy(&group->inotify_data.idr);
}
static struct vfsmount *inotify_mnt __read_mostly;
-/* this just sits here and wastes global memory. used to just pad userspace messages with zeros */
-static struct inotify_event nul_inotify_event;
-
/* these are configurable via /proc/sys/fs/inotify/ */
static int inotify_max_user_instances __read_mostly;
static int inotify_max_queued_events __read_mostly;
static struct kmem_cache *inotify_inode_mark_cachep __read_mostly;
struct kmem_cache *event_priv_cachep __read_mostly;
-static struct fsnotify_event *inotify_ignored_event;
/*
* When inotify registers a new group it increments this and uses that
event = fsnotify_peek_notify_event(group);
- event_size += roundup(event->name_len, event_size);
+ if (event->name_len)
+ event_size += roundup(event->name_len + 1, event_size);
if (event_size > count)
return ERR_PTR(-EINVAL);
struct fsnotify_event_private_data *fsn_priv;
struct inotify_event_private_data *priv;
size_t event_size = sizeof(struct inotify_event);
- size_t name_len;
+ size_t name_len = 0;
/* we get the inotify watch descriptor from the event private data */
spin_lock(&event->lock);
inotify_free_event_priv(fsn_priv);
}
- /* round up event->name_len so it is a multiple of event_size */
- name_len = roundup(event->name_len, event_size);
+ /*
+ * round up event->name_len so it is a multiple of event_size
+ * plus an extra byte for the terminating '\0'.
+ */
+ if (event->name_len)
+ name_len = roundup(event->name_len + 1, event_size);
inotify_event.len = name_len;
inotify_event.mask = inotify_mask_to_arg(event->mask);
return -EFAULT;
buf += event->name_len;
- /* fill userspace with 0's from nul_inotify_event */
- if (copy_to_user(buf, &nul_inotify_event, len_to_zero))
+ /* fill userspace with 0's */
+ if (clear_user(buf, len_to_zero))
return -EFAULT;
buf += len_to_zero;
event_size += name_len;
list_for_each_entry(holder, &group->notification_list, event_list) {
event = holder->event;
send_len += sizeof(struct inotify_event);
- send_len += roundup(event->name_len,
- sizeof(struct inotify_event));
+ if (event->name_len)
+ send_len += roundup(event->name_len + 1,
+ sizeof(struct inotify_event));
}
mutex_unlock(&group->notification_mutex);
ret = put_user(send_len, (int __user *) p);
}
/*
- * Send IN_IGNORED for this wd, remove this wd from the idr, and drop the
- * internal reference help on the mark because it is in the idr.
+ * Remove the mark from the idr (if present) and drop the reference
+ * on the mark because it was in the idr.
+ */
+static void inotify_remove_from_idr(struct fsnotify_group *group,
+ struct inotify_inode_mark_entry *ientry)
+{
+ struct idr *idr;
+ struct fsnotify_mark_entry *entry;
+ struct inotify_inode_mark_entry *found_ientry;
+ int wd;
+
+ spin_lock(&group->inotify_data.idr_lock);
+ idr = &group->inotify_data.idr;
+ wd = ientry->wd;
+
+ if (wd == -1)
+ goto out;
+
+ entry = idr_find(&group->inotify_data.idr, wd);
+ if (unlikely(!entry))
+ goto out;
+
+ found_ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
+ if (unlikely(found_ientry != ientry)) {
+ /* We found an entry in the idr with the right wd, but it's
+ * not the entry we were told to remove. eparis seriously
+ * fucked up somewhere. */
+ WARN_ON(1);
+ ientry->wd = -1;
+ goto out;
+ }
+
+ /* One ref for being in the idr, one ref held by the caller */
+ BUG_ON(atomic_read(&entry->refcnt) < 2);
+
+ idr_remove(idr, wd);
+ ientry->wd = -1;
+
+ /* removed from the idr, drop that ref */
+ fsnotify_put_mark(entry);
+out:
+ spin_unlock(&group->inotify_data.idr_lock);
+}
+
+/*
+ * Send IN_IGNORED for this wd, remove this wd from the idr.
*/
void inotify_ignored_and_remove_idr(struct fsnotify_mark_entry *entry,
struct fsnotify_group *group)
{
struct inotify_inode_mark_entry *ientry;
+ struct fsnotify_event *ignored_event;
struct inotify_event_private_data *event_priv;
struct fsnotify_event_private_data *fsn_event_priv;
- struct idr *idr;
+ int ret;
+
+ ignored_event = fsnotify_create_event(NULL, FS_IN_IGNORED, NULL,
+ FSNOTIFY_EVENT_NONE, NULL, 0,
+ GFP_NOFS);
+ if (!ignored_event)
+ return;
ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
- event_priv = kmem_cache_alloc(event_priv_cachep, GFP_KERNEL);
+ event_priv = kmem_cache_alloc(event_priv_cachep, GFP_NOFS);
if (unlikely(!event_priv))
goto skip_send_ignore;
fsn_event_priv->group = group;
event_priv->wd = ientry->wd;
- fsnotify_add_notify_event(group, inotify_ignored_event, fsn_event_priv);
-
- /* did the private data get added? */
- if (list_empty(&fsn_event_priv->event_list))
+ ret = fsnotify_add_notify_event(group, ignored_event, fsn_event_priv);
+ if (ret)
inotify_free_event_priv(fsn_event_priv);
skip_send_ignore:
+ /* matches the reference taken when the event was created */
+ fsnotify_put_event(ignored_event);
+
/* remove this entry from the idr */
- spin_lock(&group->inotify_data.idr_lock);
- idr = &group->inotify_data.idr;
- idr_remove(idr, ientry->wd);
- spin_unlock(&group->inotify_data.idr_lock);
+ inotify_remove_from_idr(group, ientry);
- /* removed from idr, drop that reference */
- fsnotify_put_mark(entry);
+ atomic_dec(&group->inotify_data.user->inotify_watches);
}
/* ding dong the mark is dead */
kmem_cache_free(inotify_inode_mark_cachep, ientry);
}
-static int inotify_update_watch(struct fsnotify_group *group, struct inode *inode, u32 arg)
+static int inotify_update_existing_watch(struct fsnotify_group *group,
+ struct inode *inode,
+ u32 arg)
{
- struct fsnotify_mark_entry *entry = NULL;
+ struct fsnotify_mark_entry *entry;
struct inotify_inode_mark_entry *ientry;
- int ret = 0;
- int add = (arg & IN_MASK_ADD);
- __u32 mask;
__u32 old_mask, new_mask;
+ __u32 mask;
+ int add = (arg & IN_MASK_ADD);
+ int ret;
/* don't allow invalid bits: we don't want flags set */
mask = inotify_arg_to_mask(arg);
if (unlikely(!mask))
return -EINVAL;
- ientry = kmem_cache_alloc(inotify_inode_mark_cachep, GFP_KERNEL);
- if (unlikely(!ientry))
- return -ENOMEM;
- /* we set the mask at the end after attaching it */
- fsnotify_init_mark(&ientry->fsn_entry, inotify_free_mark);
- ientry->wd = 0;
-
-find_entry:
spin_lock(&inode->i_lock);
entry = fsnotify_find_mark_entry(group, inode);
spin_unlock(&inode->i_lock);
- if (entry) {
- kmem_cache_free(inotify_inode_mark_cachep, ientry);
- ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
- } else {
- if (atomic_read(&group->inotify_data.user->inotify_watches) >= inotify_max_user_watches) {
- ret = -ENOSPC;
- goto out_err;
- }
-
- ret = fsnotify_add_mark(&ientry->fsn_entry, group, inode);
- if (ret == -EEXIST)
- goto find_entry;
- else if (ret)
- goto out_err;
+ if (!entry)
+ return -ENOENT;
- entry = &ientry->fsn_entry;
-retry:
- ret = -ENOMEM;
- if (unlikely(!idr_pre_get(&group->inotify_data.idr, GFP_KERNEL)))
- goto out_err;
-
- spin_lock(&group->inotify_data.idr_lock);
- /* if entry is added to the idr we keep the reference obtained
- * through fsnotify_mark_add. remember to drop this reference
- * when entry is removed from idr */
- ret = idr_get_new_above(&group->inotify_data.idr, entry,
- ++group->inotify_data.last_wd,
- &ientry->wd);
- spin_unlock(&group->inotify_data.idr_lock);
- if (ret) {
- if (ret == -EAGAIN)
- goto retry;
- goto out_err;
- }
- atomic_inc(&group->inotify_data.user->inotify_watches);
- }
+ ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
spin_lock(&entry->lock);
fsnotify_recalc_group_mask(group);
}
- return ientry->wd;
+ /* return the wd */
+ ret = ientry->wd;
-out_err:
- /* see this isn't supposed to happen, just kill the watch */
- if (entry) {
- fsnotify_destroy_mark_by_entry(entry);
- fsnotify_put_mark(entry);
+ /* match the get from fsnotify_find_mark_entry() */
+ fsnotify_put_mark(entry);
+
+ return ret;
+}
+
+static int inotify_new_watch(struct fsnotify_group *group,
+ struct inode *inode,
+ u32 arg)
+{
+ struct inotify_inode_mark_entry *tmp_ientry;
+ __u32 mask;
+ int ret;
+
+ /* don't allow invalid bits: we don't want flags set */
+ mask = inotify_arg_to_mask(arg);
+ if (unlikely(!mask))
+ return -EINVAL;
+
+ tmp_ientry = kmem_cache_alloc(inotify_inode_mark_cachep, GFP_KERNEL);
+ if (unlikely(!tmp_ientry))
+ return -ENOMEM;
+
+ fsnotify_init_mark(&tmp_ientry->fsn_entry, inotify_free_mark);
+ tmp_ientry->fsn_entry.mask = mask;
+ tmp_ientry->wd = -1;
+
+ ret = -ENOSPC;
+ if (atomic_read(&group->inotify_data.user->inotify_watches) >= inotify_max_user_watches)
+ goto out_err;
+retry:
+ ret = -ENOMEM;
+ if (unlikely(!idr_pre_get(&group->inotify_data.idr, GFP_KERNEL)))
+ goto out_err;
+
+ spin_lock(&group->inotify_data.idr_lock);
+ ret = idr_get_new_above(&group->inotify_data.idr, &tmp_ientry->fsn_entry,
+ group->inotify_data.last_wd,
+ &tmp_ientry->wd);
+ spin_unlock(&group->inotify_data.idr_lock);
+ if (ret) {
+ /* idr was out of memory allocate and try again */
+ if (ret == -EAGAIN)
+ goto retry;
+ goto out_err;
+ }
+
+ /* we put the mark on the idr, take a reference */
+ fsnotify_get_mark(&tmp_ientry->fsn_entry);
+
+ /* we are on the idr, now get on the inode */
+ ret = fsnotify_add_mark(&tmp_ientry->fsn_entry, group, inode);
+ if (ret) {
+ /* we failed to get on the inode, get off the idr */
+ inotify_remove_from_idr(group, tmp_ientry);
+ goto out_err;
}
+
+ /* update the idr hint, who cares about races, it's just a hint */
+ group->inotify_data.last_wd = tmp_ientry->wd;
+
+ /* increment the number of watches the user has */
+ atomic_inc(&group->inotify_data.user->inotify_watches);
+
+ /* return the watch descriptor for this new entry */
+ ret = tmp_ientry->wd;
+
+ /* match the ref from fsnotify_init_markentry() */
+ fsnotify_put_mark(&tmp_ientry->fsn_entry);
+
+ /* if this mark added a new event update the group mask */
+ if (mask & ~group->mask)
+ fsnotify_recalc_group_mask(group);
+
+out_err:
+ if (ret < 0)
+ kmem_cache_free(inotify_inode_mark_cachep, tmp_ientry);
+
+ return ret;
+}
+
+static int inotify_update_watch(struct fsnotify_group *group, struct inode *inode, u32 arg)
+{
+ int ret = 0;
+
+retry:
+ /* try to update and existing watch with the new arg */
+ ret = inotify_update_existing_watch(group, inode, arg);
+ /* no mark present, try to add a new one */
+ if (ret == -ENOENT)
+ ret = inotify_new_watch(group, inode, arg);
+ /*
+ * inotify_new_watch could race with another thread which did an
+ * inotify_new_watch between the update_existing and the add watch
+ * here, go back and try to update an existing mark again.
+ */
+ if (ret == -EEXIST)
+ goto retry;
+
return ret;
}
spin_lock_init(&group->inotify_data.idr_lock);
idr_init(&group->inotify_data.idr);
- group->inotify_data.last_wd = 0;
+ group->inotify_data.last_wd = 1;
group->inotify_data.user = user;
group->inotify_data.fa = NULL;
inotify_inode_mark_cachep = KMEM_CACHE(inotify_inode_mark_entry, SLAB_PANIC);
event_priv_cachep = KMEM_CACHE(inotify_event_private_data, SLAB_PANIC);
- inotify_ignored_event = fsnotify_create_event(NULL, FS_IN_IGNORED, NULL, FSNOTIFY_EVENT_NONE, NULL, 0);
- if (!inotify_ignored_event)
- panic("unable to allocate the inotify ignored event\n");
inotify_max_queued_events = 16384;
inotify_max_user_instances = 128;
{
if ((old->mask == new->mask) &&
(old->to_tell == new->to_tell) &&
- (old->data_type == new->data_type)) {
+ (old->data_type == new->data_type) &&
+ (old->name_len == new->name_len)) {
switch (old->data_type) {
case (FSNOTIFY_EVENT_INODE):
- if (old->inode == new->inode)
+ /* remember, after old was put on the wait_q we aren't
+ * allowed to look at the inode any more, only thing
+ * left to check was if the file_name is the same */
+ if (old->name_len &&
+ !strcmp(old->file_name, new->file_name))
return true;
break;
case (FSNOTIFY_EVENT_PATH):
if ((old->path.mnt == new->path.mnt) &&
(old->path.dentry == new->path.dentry))
return true;
+ break;
case (FSNOTIFY_EVENT_NONE):
- return true;
+ if (old->mask & FS_Q_OVERFLOW)
+ return true;
+ else if (old->mask & FS_IN_IGNORED)
+ return false;
+ return false;
};
}
return false;
struct list_head *list = &group->notification_list;
struct fsnotify_event_holder *last_holder;
struct fsnotify_event *last_event;
-
- /* easy to tell if priv was attached to the event */
- INIT_LIST_HEAD(&priv->event_list);
+ int ret = 0;
/*
* There is one fsnotify_event_holder embedded inside each fsnotify_event.
if (group->q_len >= group->max_events) {
event = &q_overflow_event;
+ ret = -EOVERFLOW;
/* sorry, no private data on the overflow event */
priv = NULL;
}
mutex_unlock(&group->notification_mutex);
wake_up(&group->notification_waitq);
- return 0;
+ return ret;
}
/*
* @name the filename, if available
*/
struct fsnotify_event *fsnotify_create_event(struct inode *to_tell, __u32 mask, void *data,
- int data_type, const char *name, u32 cookie)
+ int data_type, const char *name, u32 cookie,
+ gfp_t gfp)
{
struct fsnotify_event *event;
- event = kmem_cache_alloc(fsnotify_event_cachep, GFP_KERNEL);
+ event = kmem_cache_alloc(fsnotify_event_cachep, gfp);
if (!event)
return NULL;
initialize_event(event);
if (name) {
- event->file_name = kstrdup(name, GFP_KERNEL);
+ event->file_name = kstrdup(name, gfp);
if (!event->file_name) {
kmem_cache_free(fsnotify_event_cachep, event);
return NULL;
* immediately to their right.
*/
left_clusters = le32_to_cpu(right_child_el->l_recs[0].e_cpos);
- if (ocfs2_is_empty_extent(&right_child_el->l_recs[0])) {
+ if (!ocfs2_rec_clusters(right_child_el, &right_child_el->l_recs[0])) {
+ BUG_ON(right_child_el->l_tree_depth);
BUG_ON(le16_to_cpu(right_child_el->l_next_free_rec) <= 1);
left_clusters = le32_to_cpu(right_child_el->l_recs[1].e_cpos);
}
return ret;
}
-static void ocfs2_update_edge_lengths(struct inode *inode, handle_t *handle,
- struct ocfs2_path *path)
+static int ocfs2_update_edge_lengths(struct inode *inode, handle_t *handle,
+ int subtree_index, struct ocfs2_path *path)
{
- int i, idx;
+ int i, idx, ret;
struct ocfs2_extent_rec *rec;
struct ocfs2_extent_list *el;
struct ocfs2_extent_block *eb;
u32 range;
+ /*
+ * In normal tree rotation process, we will never touch the
+ * tree branch above subtree_index and ocfs2_extend_rotate_transaction
+ * doesn't reserve the credits for them either.
+ *
+ * But we do have a special case here which will update the rightmost
+ * records for all the bh in the path.
+ * So we have to allocate extra credits and access them.
+ */
+ ret = ocfs2_extend_trans(handle,
+ handle->h_buffer_credits + subtree_index);
+ if (ret) {
+ mlog_errno(ret);
+ goto out;
+ }
+
+ ret = ocfs2_journal_access_path(inode, handle, path);
+ if (ret) {
+ mlog_errno(ret);
+ goto out;
+ }
+
/* Path should always be rightmost. */
eb = (struct ocfs2_extent_block *)path_leaf_bh(path)->b_data;
BUG_ON(eb->h_next_leaf_blk != 0ULL);
ocfs2_journal_dirty(handle, path->p_node[i].bh);
}
+out:
+ return ret;
}
static void ocfs2_unlink_path(struct inode *inode, handle_t *handle,
if (del_right_subtree) {
ocfs2_unlink_subtree(inode, handle, left_path, right_path,
subtree_index, dealloc);
- ocfs2_update_edge_lengths(inode, handle, left_path);
+ ret = ocfs2_update_edge_lengths(inode, handle, subtree_index,
+ left_path);
+ if (ret) {
+ mlog_errno(ret);
+ goto out;
+ }
eb = (struct ocfs2_extent_block *)path_leaf_bh(left_path)->b_data;
ocfs2_et_set_last_eb_blk(et, le64_to_cpu(eb->h_blkno));
ocfs2_unlink_subtree(inode, handle, left_path, path,
subtree_index, dealloc);
- ocfs2_update_edge_lengths(inode, handle, left_path);
+ ret = ocfs2_update_edge_lengths(inode, handle, subtree_index,
+ left_path);
+ if (ret) {
+ mlog_errno(ret);
+ goto out;
+ }
eb = (struct ocfs2_extent_block *)path_leaf_bh(left_path)->b_data;
ocfs2_et_set_last_eb_blk(et, le64_to_cpu(eb->h_blkno));
}
status = 0;
bail:
-
+ brelse(last_eb_bh);
mlog_exit(status);
return status;
}
(unsigned long long)OCFS2_I(inode)->ip_blkno);
mlog(ML_ERROR, "Size %llu, clusters %u\n", (unsigned long long)i_size_read(inode), OCFS2_I(inode)->ip_clusters);
dump_stack();
+ goto bail;
}
past_eof = ocfs2_blocks_for_bytes(inode->i_sb, i_size_read(inode));
*/
unsigned c_new;
unsigned c_unwritten;
+ unsigned c_needs_zero;
};
-static inline int ocfs2_should_zero_cluster(struct ocfs2_write_cluster_desc *d)
-{
- return d->c_new || d->c_unwritten;
-}
-
struct ocfs2_write_ctxt {
/* Logical cluster position / len of write */
u32 w_cpos;
u32 w_clen;
+ /* First cluster allocated in a nonsparse extend */
+ u32 w_first_new_cpos;
+
struct ocfs2_write_cluster_desc w_desc[OCFS2_MAX_CLUSTERS_PER_PAGE];
/*
return -ENOMEM;
wc->w_cpos = pos >> osb->s_clustersize_bits;
+ wc->w_first_new_cpos = UINT_MAX;
cend = (pos + len - 1) >> osb->s_clustersize_bits;
wc->w_clen = cend - wc->w_cpos + 1;
get_bh(di_bh);
*/
static int ocfs2_write_cluster(struct address_space *mapping,
u32 phys, unsigned int unwritten,
+ unsigned int should_zero,
struct ocfs2_alloc_context *data_ac,
struct ocfs2_alloc_context *meta_ac,
struct ocfs2_write_ctxt *wc, u32 cpos,
loff_t user_pos, unsigned user_len)
{
- int ret, i, new, should_zero = 0;
+ int ret, i, new;
u64 v_blkno, p_blkno;
struct inode *inode = mapping->host;
struct ocfs2_extent_tree et;
new = phys == 0 ? 1 : 0;
- if (new || unwritten)
- should_zero = 1;
-
if (new) {
u32 tmp_pos;
if (tmpret) {
mlog_errno(tmpret);
if (ret == 0)
- tmpret = ret;
+ ret = tmpret;
}
}
local_len = osb->s_clustersize - cluster_off;
ret = ocfs2_write_cluster(mapping, desc->c_phys,
- desc->c_unwritten, data_ac, meta_ac,
+ desc->c_unwritten,
+ desc->c_needs_zero,
+ data_ac, meta_ac,
wc, desc->c_cpos, pos, local_len);
if (ret) {
mlog_errno(ret);
* newly allocated cluster.
*/
desc = &wc->w_desc[0];
- if (ocfs2_should_zero_cluster(desc))
+ if (desc->c_needs_zero)
ocfs2_figure_cluster_boundaries(osb,
desc->c_cpos,
&wc->w_target_from,
NULL);
desc = &wc->w_desc[wc->w_clen - 1];
- if (ocfs2_should_zero_cluster(desc))
+ if (desc->c_needs_zero)
ocfs2_figure_cluster_boundaries(osb,
desc->c_cpos,
NULL,
phys++;
}
+ /*
+ * If w_first_new_cpos is < UINT_MAX, we have a non-sparse
+ * file that got extended. w_first_new_cpos tells us
+ * where the newly allocated clusters are so we can
+ * zero them.
+ */
+ if (desc->c_cpos >= wc->w_first_new_cpos) {
+ BUG_ON(phys == 0);
+ desc->c_needs_zero = 1;
+ }
+
desc->c_phys = phys;
if (phys == 0) {
desc->c_new = 1;
+ desc->c_needs_zero = 1;
*clusters_to_alloc = *clusters_to_alloc + 1;
}
- if (ext_flags & OCFS2_EXT_UNWRITTEN)
+
+ if (ext_flags & OCFS2_EXT_UNWRITTEN) {
desc->c_unwritten = 1;
+ desc->c_needs_zero = 1;
+ }
num_clusters--;
}
if (newsize <= i_size_read(inode))
return 0;
- ret = ocfs2_extend_no_holes(inode, newsize, newsize - len);
+ ret = ocfs2_extend_no_holes(inode, newsize, pos);
if (ret)
mlog_errno(ret);
+ wc->w_first_new_cpos =
+ ocfs2_clusters_for_bytes(inode->i_sb, i_size_read(inode));
+
return ret;
}
struct page **pagep, void **fsdata,
struct buffer_head *di_bh, struct page *mmap_page)
{
- int ret, credits = OCFS2_INODE_UPDATE_CREDITS;
+ int ret, cluster_of_pages, credits = OCFS2_INODE_UPDATE_CREDITS;
unsigned int clusters_to_alloc, extents_to_split;
struct ocfs2_write_ctxt *wc;
struct inode *inode = mapping->host;
}
- ocfs2_set_target_boundaries(osb, wc, pos, len,
- clusters_to_alloc + extents_to_split);
+ /*
+ * We have to zero sparse allocated clusters, unwritten extent clusters,
+ * and non-sparse clusters we just extended. For non-sparse writes,
+ * we know zeros will only be needed in the first and/or last cluster.
+ */
+ if (clusters_to_alloc || extents_to_split ||
+ (wc->w_clen && (wc->w_desc[0].c_needs_zero ||
+ wc->w_desc[wc->w_clen - 1].c_needs_zero)))
+ cluster_of_pages = 1;
+ else
+ cluster_of_pages = 0;
+
+ ocfs2_set_target_boundaries(osb, wc, pos, len, cluster_of_pages);
handle = ocfs2_start_trans(osb, credits);
if (IS_ERR(handle)) {
* extent.
*/
ret = ocfs2_grab_pages_for_write(mapping, wc, wc->w_cpos, pos,
- clusters_to_alloc + extents_to_split,
- mmap_page);
+ cluster_of_pages, mmap_page);
if (ret) {
mlog_errno(ret);
goto out_quota;
goto bail;
}
+ /*
+ * If the last lookup failed to create dentry lock, let us
+ * redo it.
+ */
+ if (!dentry->d_fsdata) {
+ mlog(0, "Inode %llu doesn't have dentry lock, "
+ "returning false\n",
+ (unsigned long long)OCFS2_I(inode)->ip_blkno);
+ goto bail;
+ }
+
ret = 1;
bail:
return ret;
}
-static DEFINE_SPINLOCK(dentry_list_lock);
+DEFINE_SPINLOCK(dentry_list_lock);
/* We limit the number of dentry locks to drop in one go. We have
* this limit so that we don't starve other users of ocfs2_wq. */
#define DL_INODE_DROP_COUNT 64
/* Drop inode references from dentry locks */
-void ocfs2_drop_dl_inodes(struct work_struct *work)
+static void __ocfs2_drop_dl_inodes(struct ocfs2_super *osb, int drop_count)
{
- struct ocfs2_super *osb = container_of(work, struct ocfs2_super,
- dentry_lock_work);
struct ocfs2_dentry_lock *dl;
- int drop_count = DL_INODE_DROP_COUNT;
spin_lock(&dentry_list_lock);
- while (osb->dentry_lock_list && drop_count--) {
+ while (osb->dentry_lock_list && (drop_count < 0 || drop_count--)) {
dl = osb->dentry_lock_list;
osb->dentry_lock_list = dl->dl_next;
spin_unlock(&dentry_list_lock);
kfree(dl);
spin_lock(&dentry_list_lock);
}
- if (osb->dentry_lock_list)
+ spin_unlock(&dentry_list_lock);
+}
+
+void ocfs2_drop_dl_inodes(struct work_struct *work)
+{
+ struct ocfs2_super *osb = container_of(work, struct ocfs2_super,
+ dentry_lock_work);
+
+ __ocfs2_drop_dl_inodes(osb, DL_INODE_DROP_COUNT);
+ /*
+ * Don't queue dropping if umount is in progress. We flush the
+ * list in ocfs2_dismount_volume
+ */
+ spin_lock(&dentry_list_lock);
+ if (osb->dentry_lock_list &&
+ !ocfs2_test_osb_flag(osb, OCFS2_OSB_DROP_DENTRY_LOCK_IMMED))
queue_work(ocfs2_wq, &osb->dentry_lock_work);
spin_unlock(&dentry_list_lock);
}
+/* Flush the whole work queue */
+void ocfs2_drop_all_dl_inodes(struct ocfs2_super *osb)
+{
+ __ocfs2_drop_dl_inodes(osb, -1);
+}
+
/*
* ocfs2_dentry_iput() and friends.
*
/* We leave dropping of inode reference to ocfs2_wq as that can
* possibly lead to inode deletion which gets tricky */
spin_lock(&dentry_list_lock);
- if (!osb->dentry_lock_list)
+ if (!osb->dentry_lock_list &&
+ !ocfs2_test_osb_flag(osb, OCFS2_OSB_DROP_DENTRY_LOCK_IMMED))
queue_work(ocfs2_wq, &osb->dentry_lock_work);
dl->dl_next = osb->dentry_lock_list;
osb->dentry_lock_list = dl;
int ocfs2_dentry_attach_lock(struct dentry *dentry, struct inode *inode,
u64 parent_blkno);
+extern spinlock_t dentry_list_lock;
+
void ocfs2_dentry_lock_put(struct ocfs2_super *osb,
struct ocfs2_dentry_lock *dl);
void ocfs2_drop_dl_inodes(struct work_struct *work);
+void ocfs2_drop_all_dl_inodes(struct ocfs2_super *osb);
struct dentry *ocfs2_find_local_alias(struct inode *inode, u64 parent_blkno,
int skip_unhashed);
lock->ast_pending, lock->ml.type);
BUG();
}
- BUG_ON(!list_empty(&lock->ast_list));
if (lock->ast_pending)
mlog(0, "lock has an ast getting flushed right now\n");
}
static struct backing_dev_info dlmfs_backing_dev_info = {
+ .name = "ocfs2-dlmfs",
.ra_pages = 0, /* No readahead */
.capabilities = BDI_CAP_NO_ACCT_AND_WRITEBACK,
};
mlog(0, "%s:%.*s: sending mig lockres (%s) to %u\n",
dlm->name, res->lockname.len, res->lockname.name,
- orig_flags & DLM_MRES_MIGRATION ? "migrate" : "recovery",
+ orig_flags & DLM_MRES_MIGRATION ? "migration" : "recovery",
send_to);
/* send it */
* that still has AST's pending... */
in_use = !list_empty(&lock->ast_list);
spin_unlock(&dlm->ast_lock);
- if (in_use) {
+ if (in_use && !(flags & LKM_CANCEL)) {
mlog(ML_ERROR, "lockres %.*s: Someone is calling dlmunlock "
"while waiting for an ast!", res->lockname.len,
res->lockname.name);
spin_lock(&res->spinlock);
if (res->state & DLM_LOCK_RES_IN_PROGRESS) {
- if (master_node) {
+ if (master_node && !(flags & LKM_CANCEL)) {
mlog(ML_ERROR, "lockres in progress!\n");
spin_unlock(&res->spinlock);
return DLM_FORWARD;
if (ret)
goto out_dio;
+ count = ocount;
ret = generic_write_checks(file, ppos, &count,
S_ISBLK(inode->i_mode));
if (ret)
mutex_unlock(&inode->i_mutex);
+ if (written)
+ ret = written;
mlog_exit(ret);
- return written ? written : ret;
+ return ret;
}
static int ocfs2_splice_to_file(struct pipe_inode_info *pipe,
os->os_osb = osb;
os->os_count = 0;
os->os_seqno = 0;
- os->os_scantime = CURRENT_TIME;
mutex_init(&os->os_lock);
INIT_DELAYED_WORK(&os->os_orphan_scan_work, ocfs2_orphan_scan_work);
+}
+void ocfs2_orphan_scan_start(struct ocfs2_super *osb)
+{
+ struct ocfs2_orphan_scan *os;
+
+ os = &osb->osb_orphan_scan;
+ os->os_scantime = CURRENT_TIME;
if (ocfs2_is_hard_readonly(osb) || ocfs2_mount_local(osb))
atomic_set(&os->os_state, ORPHAN_SCAN_INACTIVE);
else {
/* Exported only for the journal struct init code in super.c. Do not call. */
void ocfs2_orphan_scan_init(struct ocfs2_super *osb);
+void ocfs2_orphan_scan_start(struct ocfs2_super *osb);
void ocfs2_orphan_scan_stop(struct ocfs2_super *osb);
void ocfs2_orphan_scan_exit(struct ocfs2_super *osb);
/* extended attribute block update */
#define OCFS2_XATTR_BLOCK_UPDATE_CREDITS 1
+/* Update of a single quota block */
+#define OCFS2_QUOTA_BLOCK_UPDATE_CREDITS 1
+
/* global quotafile inode update, data block */
-#define OCFS2_QINFO_WRITE_CREDITS (OCFS2_INODE_UPDATE_CREDITS + 1)
+#define OCFS2_QINFO_WRITE_CREDITS (OCFS2_INODE_UPDATE_CREDITS + \
+ OCFS2_QUOTA_BLOCK_UPDATE_CREDITS)
+#define OCFS2_LOCAL_QINFO_WRITE_CREDITS OCFS2_QUOTA_BLOCK_UPDATE_CREDITS
/*
* The two writes below can accidentally see global info dirty due
* to set_info() quotactl so make them prepared for the writes.
*/
/* quota data block, global info */
/* Write to local quota file */
-#define OCFS2_QWRITE_CREDITS (OCFS2_QINFO_WRITE_CREDITS + 1)
+#define OCFS2_QWRITE_CREDITS (OCFS2_QINFO_WRITE_CREDITS + \
+ OCFS2_QUOTA_BLOCK_UPDATE_CREDITS)
/* global quota data block, local quota data block, global quota inode,
* global quota info */
-#define OCFS2_QSYNC_CREDITS (OCFS2_INODE_UPDATE_CREDITS + 3)
+#define OCFS2_QSYNC_CREDITS (OCFS2_QINFO_WRITE_CREDITS + \
+ 2 * OCFS2_QUOTA_BLOCK_UPDATE_CREDITS)
static inline int ocfs2_quota_trans_credits(struct super_block *sb)
{
return credits;
}
-/* Number of credits needed for removing quota structure from file */
-int ocfs2_calc_qdel_credits(struct super_block *sb, int type);
-/* Number of credits needed for initialization of new quota structure */
-int ocfs2_calc_qinit_credits(struct super_block *sb, int type);
-
/* group extend. inode update and last group update. */
#define OCFS2_GROUP_EXTEND_CREDITS (OCFS2_INODE_UPDATE_CREDITS + 1)
OCFS2_MOUNT_GRPQUOTA = 1 << 10, /* We support group quotas */
};
-#define OCFS2_OSB_SOFT_RO 0x0001
-#define OCFS2_OSB_HARD_RO 0x0002
-#define OCFS2_OSB_ERROR_FS 0x0004
-#define OCFS2_DEFAULT_ATIME_QUANTUM 60
+#define OCFS2_OSB_SOFT_RO 0x0001
+#define OCFS2_OSB_HARD_RO 0x0002
+#define OCFS2_OSB_ERROR_FS 0x0004
+#define OCFS2_OSB_DROP_DENTRY_LOCK_IMMED 0x0008
+
+#define OCFS2_DEFAULT_ATIME_QUANTUM 60
struct ocfs2_journal;
struct ocfs2_slot_info;
spin_unlock(&osb->osb_lock);
}
+
+static inline unsigned long ocfs2_test_osb_flag(struct ocfs2_super *osb,
+ unsigned long flag)
+{
+ unsigned long ret;
+
+ spin_lock(&osb->osb_lock);
+ ret = osb->osb_flags & flag;
+ spin_unlock(&osb->osb_lock);
+ return ret;
+}
+
static inline void ocfs2_set_ro_flag(struct ocfs2_super *osb,
int hard)
{
[OCFS2_LOCK_TYPE_OPEN] = "Open",
[OCFS2_LOCK_TYPE_FLOCK] = "Flock",
[OCFS2_LOCK_TYPE_QINFO] = "Quota",
+ [OCFS2_LOCK_TYPE_NFS_SYNC] = "NFSSync",
[OCFS2_LOCK_TYPE_ORPHAN_SCAN] = "OrphanScan",
};
unsigned int dqi_chunks; /* Number of chunks in local quota file */
unsigned int dqi_blocks; /* Number of blocks allocated for local quota file */
unsigned int dqi_syncms; /* How often should we sync with other nodes */
- unsigned int dqi_syncjiff; /* Precomputed dqi_syncms in jiffies */
struct list_head dqi_chunk; /* List of chunks */
struct inode *dqi_gqinode; /* Global quota file inode */
struct ocfs2_lock_res dqi_gqlock; /* Lock protecting quota information structure */
#include "sysfile.h"
#include "dlmglue.h"
#include "uptodate.h"
+#include "super.h"
#include "quota.h"
static struct workqueue_struct *ocfs2_quota_wq = NULL;
d->dqb_curspace = cpu_to_le64(m->dqb_curspace);
d->dqb_btime = cpu_to_le64(m->dqb_btime);
d->dqb_itime = cpu_to_le64(m->dqb_itime);
+ d->dqb_pad1 = d->dqb_pad2 = 0;
}
static int ocfs2_global_is_id(void *dp, struct dquot *dquot)
int rc = 0;
struct buffer_head *tmp = *bh;
+ if (i_size_read(inode) >> inode->i_sb->s_blocksize_bits <= v_block) {
+ ocfs2_error(inode->i_sb,
+ "Quota file %llu is probably corrupted! Requested "
+ "to read block %Lu but file has size only %Lu\n",
+ (unsigned long long)OCFS2_I(inode)->ip_blkno,
+ (unsigned long long)v_block,
+ (unsigned long long)i_size_read(inode));
+ return -EIO;
+ }
rc = ocfs2_read_virt_blocks(inode, v_block, 1, &tmp, 0,
ocfs2_validate_quota_block);
if (rc)
mutex_lock_nested(&gqinode->i_mutex, I_MUTEX_QUOTA);
if (gqinode->i_size < off + len) {
- down_write(&OCFS2_I(gqinode)->ip_alloc_sem);
- err = ocfs2_extend_no_holes(gqinode, off + len, off);
- up_write(&OCFS2_I(gqinode)->ip_alloc_sem);
- if (err < 0)
- goto out;
+ loff_t rounded_end =
+ ocfs2_align_bytes_to_blocks(sb, off + len);
+
+ /* Space is already allocated in ocfs2_global_read_dquot() */
err = ocfs2_simple_size_update(gqinode,
oinfo->dqi_gqi_bh,
- off + len);
+ rounded_end);
if (err < 0)
goto out;
new = 1;
}
if (err) {
mlog_errno(err);
- return err;
+ goto out;
}
lock_buffer(bh);
if (new)
info->dqi_bgrace = le32_to_cpu(dinfo.dqi_bgrace);
info->dqi_igrace = le32_to_cpu(dinfo.dqi_igrace);
oinfo->dqi_syncms = le32_to_cpu(dinfo.dqi_syncms);
- oinfo->dqi_syncjiff = msecs_to_jiffies(oinfo->dqi_syncms);
oinfo->dqi_gi.dqi_blocks = le32_to_cpu(dinfo.dqi_blocks);
oinfo->dqi_gi.dqi_free_blk = le32_to_cpu(dinfo.dqi_free_blk);
oinfo->dqi_gi.dqi_free_entry = le32_to_cpu(dinfo.dqi_free_entry);
oinfo->dqi_gi.dqi_qtree_depth = qtree_depth(&oinfo->dqi_gi);
INIT_DELAYED_WORK(&oinfo->dqi_sync_work, qsync_work_fn);
queue_delayed_work(ocfs2_quota_wq, &oinfo->dqi_sync_work,
- oinfo->dqi_syncjiff);
+ msecs_to_jiffies(oinfo->dqi_syncms));
out_err:
mlog_exit(status);
return err;
}
+static int ocfs2_global_qinit_alloc(struct super_block *sb, int type)
+{
+ struct ocfs2_mem_dqinfo *oinfo = sb_dqinfo(sb, type)->dqi_priv;
+
+ /*
+ * We may need to allocate tree blocks and a leaf block but not the
+ * root block
+ */
+ return oinfo->dqi_gi.dqi_qtree_depth;
+}
+
+static int ocfs2_calc_global_qinit_credits(struct super_block *sb, int type)
+{
+ /* We modify all the allocated blocks, tree root, and info block */
+ return (ocfs2_global_qinit_alloc(sb, type) + 2) *
+ OCFS2_QUOTA_BLOCK_UPDATE_CREDITS;
+}
+
/* Read in information from global quota file and acquire a reference to it.
* dquot_acquire() has already started the transaction and locked quota file */
int ocfs2_global_read_dquot(struct dquot *dquot)
{
int err, err2, ex = 0;
- struct ocfs2_mem_dqinfo *info =
- sb_dqinfo(dquot->dq_sb, dquot->dq_type)->dqi_priv;
+ struct super_block *sb = dquot->dq_sb;
+ int type = dquot->dq_type;
+ struct ocfs2_mem_dqinfo *info = sb_dqinfo(sb, type)->dqi_priv;
+ struct ocfs2_super *osb = OCFS2_SB(sb);
+ struct inode *gqinode = info->dqi_gqinode;
+ int need_alloc = ocfs2_global_qinit_alloc(sb, type);
+ handle_t *handle = NULL;
err = ocfs2_qinfo_lock(info, 0);
if (err < 0)
OCFS2_DQUOT(dquot)->dq_use_count++;
OCFS2_DQUOT(dquot)->dq_origspace = dquot->dq_dqb.dqb_curspace;
OCFS2_DQUOT(dquot)->dq_originodes = dquot->dq_dqb.dqb_curinodes;
+ ocfs2_qinfo_unlock(info, 0);
+
if (!dquot->dq_off) { /* No real quota entry? */
- /* Upgrade to exclusive lock for allocation */
- ocfs2_qinfo_unlock(info, 0);
- err = ocfs2_qinfo_lock(info, 1);
- if (err < 0)
- goto out_qlock;
ex = 1;
+ /*
+ * Add blocks to quota file before we start a transaction since
+ * locking allocators ranks above a transaction start
+ */
+ WARN_ON(journal_current_handle());
+ down_write(&OCFS2_I(gqinode)->ip_alloc_sem);
+ err = ocfs2_extend_no_holes(gqinode,
+ gqinode->i_size + (need_alloc << sb->s_blocksize_bits),
+ gqinode->i_size);
+ up_write(&OCFS2_I(gqinode)->ip_alloc_sem);
+ if (err < 0)
+ goto out;
}
+
+ handle = ocfs2_start_trans(osb,
+ ocfs2_calc_global_qinit_credits(sb, type));
+ if (IS_ERR(handle)) {
+ err = PTR_ERR(handle);
+ goto out;
+ }
+ err = ocfs2_qinfo_lock(info, ex);
+ if (err < 0)
+ goto out_trans;
err = qtree_write_dquot(&info->dqi_gi, dquot);
if (ex && info_dirty(sb_dqinfo(dquot->dq_sb, dquot->dq_type))) {
err2 = __ocfs2_global_write_info(dquot->dq_sb, dquot->dq_type);
ocfs2_qinfo_unlock(info, 1);
else
ocfs2_qinfo_unlock(info, 0);
+out_trans:
+ if (handle)
+ ocfs2_commit_trans(osb, handle);
out:
if (err < 0)
mlog_errno(err);
dquot_scan_active(sb, ocfs2_sync_dquot_helper, oinfo->dqi_type);
queue_delayed_work(ocfs2_quota_wq, &oinfo->dqi_sync_work,
- oinfo->dqi_syncjiff);
+ msecs_to_jiffies(oinfo->dqi_syncms));
}
/*
return status;
}
-int ocfs2_calc_qdel_credits(struct super_block *sb, int type)
+static int ocfs2_calc_qdel_credits(struct super_block *sb, int type)
{
- struct ocfs2_mem_dqinfo *oinfo;
- int features[MAXQUOTAS] = { OCFS2_FEATURE_RO_COMPAT_USRQUOTA,
- OCFS2_FEATURE_RO_COMPAT_GRPQUOTA };
-
- if (!OCFS2_HAS_RO_COMPAT_FEATURE(sb, features[type]))
- return 0;
-
- oinfo = sb_dqinfo(sb, type)->dqi_priv;
- /* We modify tree, leaf block, global info, local chunk header,
- * global and local inode */
- return oinfo->dqi_gi.dqi_qtree_depth + 2 + 1 +
- 2 * OCFS2_INODE_UPDATE_CREDITS;
+ struct ocfs2_mem_dqinfo *oinfo = sb_dqinfo(sb, type)->dqi_priv;
+ /*
+ * We modify tree, leaf block, global info, local chunk header,
+ * global and local inode; OCFS2_QINFO_WRITE_CREDITS already
+ * accounts for inode update
+ */
+ return (oinfo->dqi_gi.dqi_qtree_depth + 2) *
+ OCFS2_QUOTA_BLOCK_UPDATE_CREDITS +
+ OCFS2_QINFO_WRITE_CREDITS +
+ OCFS2_INODE_UPDATE_CREDITS;
}
static int ocfs2_release_dquot(struct dquot *dquot)
return status;
}
-int ocfs2_calc_qinit_credits(struct super_block *sb, int type)
-{
- struct ocfs2_mem_dqinfo *oinfo;
- int features[MAXQUOTAS] = { OCFS2_FEATURE_RO_COMPAT_USRQUOTA,
- OCFS2_FEATURE_RO_COMPAT_GRPQUOTA };
- struct ocfs2_dinode *lfe, *gfe;
-
- if (!OCFS2_HAS_RO_COMPAT_FEATURE(sb, features[type]))
- return 0;
-
- oinfo = sb_dqinfo(sb, type)->dqi_priv;
- gfe = (struct ocfs2_dinode *)oinfo->dqi_gqi_bh->b_data;
- lfe = (struct ocfs2_dinode *)oinfo->dqi_lqi_bh->b_data;
- /* We can extend local file + global file. In local file we
- * can modify info, chunk header block and dquot block. In
- * global file we can modify info, tree and leaf block */
- return ocfs2_calc_extend_credits(sb, &lfe->id2.i_list, 0) +
- ocfs2_calc_extend_credits(sb, &gfe->id2.i_list, 0) +
- 3 + oinfo->dqi_gi.dqi_qtree_depth + 2;
-}
-
static int ocfs2_acquire_dquot(struct dquot *dquot)
{
- handle_t *handle;
struct ocfs2_mem_dqinfo *oinfo =
sb_dqinfo(dquot->dq_sb, dquot->dq_type)->dqi_priv;
- struct ocfs2_super *osb = OCFS2_SB(dquot->dq_sb);
int status = 0;
mlog_entry("id=%u, type=%d", dquot->dq_id, dquot->dq_type);
status = ocfs2_lock_global_qf(oinfo, 1);
if (status < 0)
goto out;
- handle = ocfs2_start_trans(osb,
- ocfs2_calc_qinit_credits(dquot->dq_sb, dquot->dq_type));
- if (IS_ERR(handle)) {
- status = PTR_ERR(handle);
- mlog_errno(status);
- goto out_ilock;
- }
status = dquot_acquire(dquot);
- ocfs2_commit_trans(osb, handle);
-out_ilock:
ocfs2_unlock_global_qf(oinfo, 1);
out:
mlog_exit(status);
#include "sysfile.h"
#include "dlmglue.h"
#include "quota.h"
+#include "uptodate.h"
/* Number of local quota structures per block */
static inline unsigned int ol_quota_entries_per_block(struct super_block *sb)
handle_t *handle;
int status;
- handle = ocfs2_start_trans(OCFS2_SB(sb), 1);
+ handle = ocfs2_start_trans(OCFS2_SB(sb),
+ OCFS2_QUOTA_BLOCK_UPDATE_CREDITS);
if (IS_ERR(handle)) {
status = PTR_ERR(handle);
mlog_errno(status);
goto out_bh;
/* Mark quota file as clean if we are recovering quota file of
* some other node. */
- handle = ocfs2_start_trans(osb, 1);
+ handle = ocfs2_start_trans(osb,
+ OCFS2_LOCAL_QINFO_WRITE_CREDITS);
if (IS_ERR(handle)) {
status = PTR_ERR(handle);
mlog_errno(status);
struct ocfs2_local_disk_chunk *dchunk;
int status;
handle_t *handle;
- struct buffer_head *bh = NULL;
+ struct buffer_head *bh = NULL, *dbh = NULL;
u64 p_blkno;
/* We are protected by dqio_sem so no locking needed */
mlog_errno(status);
goto out;
}
+ /* Local quota info and two new blocks we initialize */
+ handle = ocfs2_start_trans(OCFS2_SB(sb),
+ OCFS2_LOCAL_QINFO_WRITE_CREDITS +
+ 2 * OCFS2_QUOTA_BLOCK_UPDATE_CREDITS);
+ if (IS_ERR(handle)) {
+ status = PTR_ERR(handle);
+ mlog_errno(status);
+ goto out;
+ }
+ /* Initialize chunk header */
down_read(&OCFS2_I(lqinode)->ip_alloc_sem);
status = ocfs2_extent_map_get_blocks(lqinode, oinfo->dqi_blocks,
&p_blkno, NULL, NULL);
up_read(&OCFS2_I(lqinode)->ip_alloc_sem);
if (status < 0) {
mlog_errno(status);
- goto out;
+ goto out_trans;
}
bh = sb_getblk(sb, p_blkno);
if (!bh) {
status = -ENOMEM;
mlog_errno(status);
- goto out;
+ goto out_trans;
}
dchunk = (struct ocfs2_local_disk_chunk *)bh->b_data;
-
- handle = ocfs2_start_trans(OCFS2_SB(sb), 2);
- if (IS_ERR(handle)) {
- status = PTR_ERR(handle);
- mlog_errno(status);
- goto out;
- }
-
+ ocfs2_set_new_buffer_uptodate(lqinode, bh);
status = ocfs2_journal_access_dq(handle, lqinode, bh,
- OCFS2_JOURNAL_ACCESS_WRITE);
+ OCFS2_JOURNAL_ACCESS_CREATE);
if (status < 0) {
mlog_errno(status);
goto out_trans;
memset(dchunk->dqc_bitmap, 0,
sb->s_blocksize - sizeof(struct ocfs2_local_disk_chunk) -
OCFS2_QBLK_RESERVED_SPACE);
- set_buffer_uptodate(bh);
unlock_buffer(bh);
status = ocfs2_journal_dirty(handle, bh);
if (status < 0) {
goto out_trans;
}
+ /* Initialize new block with structures */
+ down_read(&OCFS2_I(lqinode)->ip_alloc_sem);
+ status = ocfs2_extent_map_get_blocks(lqinode, oinfo->dqi_blocks + 1,
+ &p_blkno, NULL, NULL);
+ up_read(&OCFS2_I(lqinode)->ip_alloc_sem);
+ if (status < 0) {
+ mlog_errno(status);
+ goto out_trans;
+ }
+ dbh = sb_getblk(sb, p_blkno);
+ if (!dbh) {
+ status = -ENOMEM;
+ mlog_errno(status);
+ goto out_trans;
+ }
+ ocfs2_set_new_buffer_uptodate(lqinode, dbh);
+ status = ocfs2_journal_access_dq(handle, lqinode, dbh,
+ OCFS2_JOURNAL_ACCESS_CREATE);
+ if (status < 0) {
+ mlog_errno(status);
+ goto out_trans;
+ }
+ lock_buffer(dbh);
+ memset(dbh->b_data, 0, sb->s_blocksize - OCFS2_QBLK_RESERVED_SPACE);
+ unlock_buffer(dbh);
+ status = ocfs2_journal_dirty(handle, dbh);
+ if (status < 0) {
+ mlog_errno(status);
+ goto out_trans;
+ }
+
+ /* Update local quotafile info */
oinfo->dqi_blocks += 2;
oinfo->dqi_chunks++;
status = ocfs2_local_write_info(sb, type);
ocfs2_commit_trans(OCFS2_SB(sb), handle);
out:
brelse(bh);
+ brelse(dbh);
kmem_cache_free(ocfs2_qf_chunk_cachep, chunk);
return ERR_PTR(status);
}
struct ocfs2_local_disk_chunk *dchunk;
int epb = ol_quota_entries_per_block(sb);
unsigned int chunk_blocks;
+ struct buffer_head *bh;
+ u64 p_blkno;
int status;
handle_t *handle;
mlog_errno(status);
goto out;
}
- handle = ocfs2_start_trans(OCFS2_SB(sb), 2);
+
+ /* Get buffer from the just added block */
+ down_read(&OCFS2_I(lqinode)->ip_alloc_sem);
+ status = ocfs2_extent_map_get_blocks(lqinode, oinfo->dqi_blocks,
+ &p_blkno, NULL, NULL);
+ up_read(&OCFS2_I(lqinode)->ip_alloc_sem);
+ if (status < 0) {
+ mlog_errno(status);
+ goto out;
+ }
+ bh = sb_getblk(sb, p_blkno);
+ if (!bh) {
+ status = -ENOMEM;
+ mlog_errno(status);
+ goto out;
+ }
+ ocfs2_set_new_buffer_uptodate(lqinode, bh);
+
+ /* Local quota info, chunk header and the new block we initialize */
+ handle = ocfs2_start_trans(OCFS2_SB(sb),
+ OCFS2_LOCAL_QINFO_WRITE_CREDITS +
+ 2 * OCFS2_QUOTA_BLOCK_UPDATE_CREDITS);
if (IS_ERR(handle)) {
status = PTR_ERR(handle);
mlog_errno(status);
goto out;
}
+ /* Zero created block */
+ status = ocfs2_journal_access_dq(handle, lqinode, bh,
+ OCFS2_JOURNAL_ACCESS_CREATE);
+ if (status < 0) {
+ mlog_errno(status);
+ goto out_trans;
+ }
+ lock_buffer(bh);
+ memset(bh->b_data, 0, sb->s_blocksize);
+ unlock_buffer(bh);
+ status = ocfs2_journal_dirty(handle, bh);
+ if (status < 0) {
+ mlog_errno(status);
+ goto out_trans;
+ }
+ /* Update chunk header */
status = ocfs2_journal_access_dq(handle, lqinode, chunk->qc_headerbh,
OCFS2_JOURNAL_ACCESS_WRITE);
if (status < 0) {
mlog_errno(status);
goto out_trans;
}
+ /* Update file header */
oinfo->dqi_blocks++;
status = ocfs2_local_write_info(sb, type);
if (status < 0) {
* General Public License for more details.
*/
+#include <linux/kernel.h>
#include <linux/crc32.h>
#include <linux/module.h>
static int dlm_status_to_errno(enum dlm_status status)
{
- BUG_ON(status > (sizeof(status_map) / sizeof(status_map[0])));
+ BUG_ON(status < 0 || status >= ARRAY_SIZE(status_map));
return status_map[status];
}
}
di = (struct ocfs2_dinode *) (*bh)->b_data;
memset(stats, 0, sizeof(struct ocfs2_blockcheck_stats));
+ spin_lock_init(&stats->b_lock);
status = ocfs2_verify_volume(di, *bh, blksize, stats);
if (status >= 0)
goto bail;
wake_up(&osb->osb_mount_event);
/* Start this when the mount is almost sure of being successful */
- ocfs2_orphan_scan_init(osb);
+ ocfs2_orphan_scan_start(osb);
mlog_exit(status);
return status;
mnt);
}
+static void ocfs2_kill_sb(struct super_block *sb)
+{
+ struct ocfs2_super *osb = OCFS2_SB(sb);
+
+ /* Failed mount? */
+ if (!osb || atomic_read(&osb->vol_state) == VOLUME_DISABLED)
+ goto out;
+
+ /* Prevent further queueing of inode drop events */
+ spin_lock(&dentry_list_lock);
+ ocfs2_set_osb_flag(osb, OCFS2_OSB_DROP_DENTRY_LOCK_IMMED);
+ spin_unlock(&dentry_list_lock);
+ /* Wait for work to finish and/or remove it */
+ cancel_work_sync(&osb->dentry_lock_work);
+out:
+ kill_block_super(sb);
+}
+
static struct file_system_type ocfs2_fs_type = {
.owner = THIS_MODULE,
.name = "ocfs2",
.get_sb = ocfs2_get_sb, /* is this called when we mount
* the fs? */
- .kill_sb = kill_block_super, /* set to the generic one
- * right now, but do we
- * need to change that? */
+ .kill_sb = ocfs2_kill_sb,
+
.fs_flags = FS_REQUIRES_DEV|FS_RENAME_DOES_D_MOVE,
.next = NULL
};
debugfs_remove(osb->osb_ctxt);
+ /*
+ * Flush inode dropping work queue so that deletes are
+ * performed while the filesystem is still working
+ */
+ ocfs2_drop_all_dl_inodes(osb);
+
/* Orphan scan should be stopped as early as possible */
ocfs2_orphan_scan_stop(osb);
snprintf(osb->dev_str, sizeof(osb->dev_str), "%u,%u",
MAJOR(osb->sb->s_dev), MINOR(osb->sb->s_dev));
+ ocfs2_orphan_scan_init(osb);
+
status = ocfs2_recovery_init(osb);
if (status) {
mlog(ML_ERROR, "Unable to initialize recovery state\n");
struct ocfs2_xattr_block *xb;
struct ocfs2_xattr_value_root *xv;
size_t size;
- int ret = -ENODATA, name_offset, name_len, block_off, i;
+ int ret = -ENODATA, name_offset, name_len, i;
+ int uninitialized_var(block_off);
xs->bucket = ocfs2_xattr_bucket_new(inode);
if (!xs->bucket) {
int do_truncate(struct dentry *dentry, loff_t length, unsigned int time_attrs,
struct file *filp)
{
- int err;
+ int ret;
struct iattr newattrs;
/* Not pretty: "inode->i_size" shouldn't really be signed. But it is. */
}
/* Remove suid/sgid on truncate too */
- newattrs.ia_valid |= should_remove_suid(dentry);
+ ret = should_remove_suid(dentry);
+ if (ret)
+ newattrs.ia_valid |= ret | ATTR_FORCE;
mutex_lock(&dentry->d_inode->i_mutex);
- err = notify_change(dentry, &newattrs);
+ ret = notify_change(dentry, &newattrs);
mutex_unlock(&dentry->d_inode->i_mutex);
- return err;
+ return ret;
}
static long do_sys_truncate(const char __user *pathname, loff_t length)
int error;
struct file *f;
+ validate_creds(cred);
+
/*
* We must always pass in a valid mount pointer. Historically
* callers got away with not passing it, but we must enforce this at
pipe_lock_nested(pipe1, I_MUTEX_PARENT);
pipe_lock_nested(pipe2, I_MUTEX_CHILD);
} else {
- pipe_lock_nested(pipe2, I_MUTEX_CHILD);
- pipe_lock_nested(pipe1, I_MUTEX_PARENT);
+ pipe_lock_nested(pipe2, I_MUTEX_PARENT);
+ pipe_lock_nested(pipe1, I_MUTEX_CHILD);
}
}
struct mm_struct *mm_for_maps(struct task_struct *task)
{
- struct mm_struct *mm = get_task_mm(task);
- if (!mm)
+ struct mm_struct *mm;
+
+ if (mutex_lock_killable(&task->cred_guard_mutex))
return NULL;
- down_read(&mm->mmap_sem);
- task_lock(task);
- if (task->mm != mm)
- goto out;
- if (task->mm != current->mm &&
- __ptrace_may_access(task, PTRACE_MODE_READ) < 0)
- goto out;
- task_unlock(task);
+
+ mm = get_task_mm(task);
+ if (mm && mm != current->mm &&
+ !ptrace_may_access(task, PTRACE_MODE_READ)) {
+ mmput(mm);
+ mm = NULL;
+ }
+ mutex_unlock(&task->cred_guard_mutex);
+
return mm;
-out:
- task_unlock(task);
- up_read(&mm->mmap_sem);
- mmput(mm);
- return NULL;
}
static int proc_pid_cmdline(struct task_struct *task, char * buffer)
if (!task)
return -ESRCH;
- task_lock(task);
- if (task->mm)
- oom_adjust = task->mm->oom_adj;
- else
- oom_adjust = OOM_DISABLE;
- task_unlock(task);
+ oom_adjust = task->oomkilladj;
put_task_struct(task);
len = snprintf(buffer, sizeof(buffer), "%i\n", oom_adjust);
task = get_proc_task(file->f_path.dentry->d_inode);
if (!task)
return -ESRCH;
- task_lock(task);
- if (!task->mm) {
- task_unlock(task);
- put_task_struct(task);
- return -EINVAL;
- }
- if (oom_adjust < task->mm->oom_adj && !capable(CAP_SYS_RESOURCE)) {
- task_unlock(task);
+ if (oom_adjust < task->oomkilladj && !capable(CAP_SYS_RESOURCE)) {
put_task_struct(task);
return -EACCES;
}
- task->mm->oom_adj = oom_adjust;
- task_unlock(task);
+ task->oomkilladj = oom_adjust;
put_task_struct(task);
if (end - buffer == 0)
return -EIO;
mm = mm_for_maps(priv->task);
if (!mm)
return NULL;
+ down_read(&mm->mmap_sem);
tail_vma = get_gate_vma(priv->task);
priv->tail_vma = tail_vma;
priv->task = NULL;
return NULL;
}
+ down_read(&mm->mmap_sem);
/* start from the Nth VMA */
for (p = rb_first(&mm->mm_rb); p; p = rb_next(p))
invalidate_bdev(sb->s_bdev);
}
mutex_lock(&dqopt->dqonoff_mutex);
- mutex_lock_nested(&inode->i_mutex, I_MUTEX_QUOTA);
if (sb_has_quota_loaded(sb, type)) {
error = -EBUSY;
goto out_lock;
* possible) Also nobody should write to the file - we use
* special IO operations which ignore the immutable bit. */
down_write(&dqopt->dqptr_sem);
+ mutex_lock_nested(&inode->i_mutex, I_MUTEX_QUOTA);
oldflags = inode->i_flags & (S_NOATIME | S_IMMUTABLE |
S_NOQUOTA);
inode->i_flags |= S_NOQUOTA | S_NOATIME | S_IMMUTABLE;
+ mutex_unlock(&inode->i_mutex);
up_write(&dqopt->dqptr_sem);
sb->dq_op->drop(inode);
}
goto out_file_init;
}
mutex_unlock(&dqopt->dqio_mutex);
- mutex_unlock(&inode->i_mutex);
spin_lock(&dq_state_lock);
dqopt->flags |= dquot_state_flag(flags, type);
spin_unlock(&dq_state_lock);
out_lock:
if (oldflags != -1) {
down_write(&dqopt->dqptr_sem);
+ mutex_lock_nested(&inode->i_mutex, I_MUTEX_QUOTA);
/* Set the flags back (in the case of accidental quotaon()
* on a wrong file we don't want to mess up the flags) */
inode->i_flags &= ~(S_NOATIME | S_NOQUOTA | S_IMMUTABLE);
inode->i_flags |= oldflags;
+ mutex_unlock(&inode->i_mutex);
up_write(&dqopt->dqptr_sem);
}
- mutex_unlock(&inode->i_mutex);
mutex_unlock(&dqopt->dqonoff_mutex);
out_fmt:
put_quota_format(fmt);
#include <linux/ramfs.h>
#include <linux/pagevec.h>
#include <linux/mman.h>
+#include <linux/sched.h>
#include <asm/uaccess.h>
#include "internal.h"
static const struct inode_operations ramfs_dir_inode_operations;
static struct backing_dev_info ramfs_backing_dev_info = {
+ .name = "ramfs",
.ra_pages = 0, /* No readahead */
.capabilities = BDI_CAP_NO_ACCT_AND_WRITEBACK |
BDI_CAP_MAP_DIRECT | BDI_CAP_MAP_COPY |
{
init_poll_funcptr(&pwq->pt, __pollwait);
pwq->polling_task = current;
+ pwq->triggered = 0;
pwq->error = 0;
pwq->table = NULL;
pwq->inline_index = 0;
s = NULL;
goto out;
}
- INIT_LIST_HEAD(&s->s_dirty);
- INIT_LIST_HEAD(&s->s_io);
- INIT_LIST_HEAD(&s->s_more_io);
INIT_LIST_HEAD(&s->s_files);
INIT_LIST_HEAD(&s->s_instances);
INIT_HLIST_HEAD(&s->s_anon);
* Drops a temporary reference, frees superblock if there's no
* references left.
*/
-static void put_super(struct super_block *sb)
+void put_super(struct super_block *sb)
{
spin_lock(&sb_lock);
__put_super(sb);
SYNC_FILE_RANGE_WAIT_AFTER)
/*
- * Do the filesystem syncing work. For simple filesystems sync_inodes_sb(sb, 0)
- * just dirties buffers with inodes so we have to submit IO for these buffers
- * via __sync_blockdev(). This also speeds up the wait == 1 case since in that
- * case write_inode() functions do sync_dirty_buffer() and thus effectively
- * write one block at a time.
+ * Do the filesystem syncing work. For simple filesystems
+ * writeback_inodes_sb(sb) just dirties buffers with inodes so we have to
+ * submit IO for these buffers via __sync_blockdev(). This also speeds up the
+ * wait == 1 case since in that case write_inode() functions do
+ * sync_dirty_buffer() and thus effectively write one block at a time.
*/
static int __sync_filesystem(struct super_block *sb, int wait)
{
/* Avoid doing twice syncing and cache pruning for quota sync */
- if (!wait)
+ if (!wait) {
writeout_quota_sb(sb, -1);
- else
+ writeback_inodes_sb(sb);
+ } else {
sync_quota_sb(sb, -1);
- sync_inodes_sb(sb, wait);
+ sync_inodes_sb(sb);
+ }
if (sb->s_op->sync_fs)
sb->s_op->sync_fs(sb, wait);
return __sync_blockdev(sb->s_bdev, wait);
*/
SYSCALL_DEFINE0(sync)
{
- wakeup_pdflush(0);
+ wakeup_flusher_threads(0);
sync_filesystems(0);
sync_filesystems(1);
if (unlikely(laptop_mode))
const struct inode_operations sysfs_dir_inode_operations = {
.lookup = sysfs_lookup,
.setattr = sysfs_setattr,
+ .setxattr = sysfs_setxattr,
};
static void remove_dir(struct sysfs_dirent *sd)
/* Remove from old parent's list and insert into new parent's list. */
sysfs_unlink_sibling(sd);
sysfs_get(new_parent_sd);
+ drop_nlink(old_parent->d_inode);
sysfs_put(sd->s_parent);
sd->s_parent = new_parent_sd;
+ inc_nlink(new_parent->d_inode);
sysfs_link_sibling(sd);
out_unlock:
#include <linux/capability.h>
#include <linux/errno.h>
#include <linux/sched.h>
+#include <linux/xattr.h>
+#include <linux/security.h>
#include "sysfs.h"
extern struct super_block * sysfs_sb;
};
static struct backing_dev_info sysfs_backing_dev_info = {
+ .name = "sysfs",
.ra_pages = 0, /* No readahead */
.capabilities = BDI_CAP_NO_ACCT_AND_WRITEBACK,
};
static const struct inode_operations sysfs_inode_operations ={
.setattr = sysfs_setattr,
+ .setxattr = sysfs_setxattr,
};
int __init sysfs_inode_init(void)
return bdi_init(&sysfs_backing_dev_info);
}
+struct sysfs_inode_attrs *sysfs_init_inode_attrs(struct sysfs_dirent *sd)
+{
+ struct sysfs_inode_attrs *attrs;
+ struct iattr *iattrs;
+
+ attrs = kzalloc(sizeof(struct sysfs_inode_attrs), GFP_KERNEL);
+ if (!attrs)
+ return NULL;
+ iattrs = &attrs->ia_iattr;
+
+ /* assign default attributes */
+ iattrs->ia_mode = sd->s_mode;
+ iattrs->ia_uid = 0;
+ iattrs->ia_gid = 0;
+ iattrs->ia_atime = iattrs->ia_mtime = iattrs->ia_ctime = CURRENT_TIME;
+
+ return attrs;
+}
int sysfs_setattr(struct dentry * dentry, struct iattr * iattr)
{
struct inode * inode = dentry->d_inode;
struct sysfs_dirent * sd = dentry->d_fsdata;
- struct iattr * sd_iattr;
+ struct sysfs_inode_attrs *sd_attrs;
+ struct iattr *iattrs;
unsigned int ia_valid = iattr->ia_valid;
int error;
if (!sd)
return -EINVAL;
- sd_iattr = sd->s_iattr;
+ sd_attrs = sd->s_iattr;
error = inode_change_ok(inode, iattr);
if (error)
if (error)
return error;
- if (!sd_iattr) {
+ if (!sd_attrs) {
/* setting attributes for the first time, allocate now */
- sd_iattr = kzalloc(sizeof(struct iattr), GFP_KERNEL);
- if (!sd_iattr)
+ sd_attrs = sysfs_init_inode_attrs(sd);
+ if (!sd_attrs)
return -ENOMEM;
- /* assign default attributes */
- sd_iattr->ia_mode = sd->s_mode;
- sd_iattr->ia_uid = 0;
- sd_iattr->ia_gid = 0;
- sd_iattr->ia_atime = sd_iattr->ia_mtime = sd_iattr->ia_ctime = CURRENT_TIME;
- sd->s_iattr = sd_iattr;
+ sd->s_iattr = sd_attrs;
+ } else {
+ /* attributes were changed at least once in past */
+ iattrs = &sd_attrs->ia_iattr;
+
+ if (ia_valid & ATTR_UID)
+ iattrs->ia_uid = iattr->ia_uid;
+ if (ia_valid & ATTR_GID)
+ iattrs->ia_gid = iattr->ia_gid;
+ if (ia_valid & ATTR_ATIME)
+ iattrs->ia_atime = timespec_trunc(iattr->ia_atime,
+ inode->i_sb->s_time_gran);
+ if (ia_valid & ATTR_MTIME)
+ iattrs->ia_mtime = timespec_trunc(iattr->ia_mtime,
+ inode->i_sb->s_time_gran);
+ if (ia_valid & ATTR_CTIME)
+ iattrs->ia_ctime = timespec_trunc(iattr->ia_ctime,
+ inode->i_sb->s_time_gran);
+ if (ia_valid & ATTR_MODE) {
+ umode_t mode = iattr->ia_mode;
+
+ if (!in_group_p(inode->i_gid) && !capable(CAP_FSETID))
+ mode &= ~S_ISGID;
+ iattrs->ia_mode = sd->s_mode = mode;
+ }
}
+ return error;
+}
- /* attributes were changed atleast once in past */
-
- if (ia_valid & ATTR_UID)
- sd_iattr->ia_uid = iattr->ia_uid;
- if (ia_valid & ATTR_GID)
- sd_iattr->ia_gid = iattr->ia_gid;
- if (ia_valid & ATTR_ATIME)
- sd_iattr->ia_atime = timespec_trunc(iattr->ia_atime,
- inode->i_sb->s_time_gran);
- if (ia_valid & ATTR_MTIME)
- sd_iattr->ia_mtime = timespec_trunc(iattr->ia_mtime,
- inode->i_sb->s_time_gran);
- if (ia_valid & ATTR_CTIME)
- sd_iattr->ia_ctime = timespec_trunc(iattr->ia_ctime,
- inode->i_sb->s_time_gran);
- if (ia_valid & ATTR_MODE) {
- umode_t mode = iattr->ia_mode;
-
- if (!in_group_p(inode->i_gid) && !capable(CAP_FSETID))
- mode &= ~S_ISGID;
- sd_iattr->ia_mode = sd->s_mode = mode;
- }
+int sysfs_setxattr(struct dentry *dentry, const char *name, const void *value,
+ size_t size, int flags)
+{
+ struct sysfs_dirent *sd = dentry->d_fsdata;
+ struct sysfs_inode_attrs *iattrs;
+ void *secdata;
+ int error;
+ u32 secdata_len = 0;
+
+ if (!sd)
+ return -EINVAL;
+ if (!sd->s_iattr)
+ sd->s_iattr = sysfs_init_inode_attrs(sd);
+ if (!sd->s_iattr)
+ return -ENOMEM;
+
+ iattrs = sd->s_iattr;
+
+ if (!strncmp(name, XATTR_SECURITY_PREFIX, XATTR_SECURITY_PREFIX_LEN)) {
+ const char *suffix = name + XATTR_SECURITY_PREFIX_LEN;
+ error = security_inode_setsecurity(dentry->d_inode, suffix,
+ value, size, flags);
+ if (error)
+ goto out;
+ error = security_inode_getsecctx(dentry->d_inode,
+ &secdata, &secdata_len);
+ if (error)
+ goto out;
+ if (iattrs->ia_secdata)
+ security_release_secctx(iattrs->ia_secdata,
+ iattrs->ia_secdata_len);
+ iattrs->ia_secdata = secdata;
+ iattrs->ia_secdata_len = secdata_len;
+ } else
+ return -EINVAL;
+out:
return error;
}
static void sysfs_init_inode(struct sysfs_dirent *sd, struct inode *inode)
{
struct bin_attribute *bin_attr;
+ struct sysfs_inode_attrs *iattrs;
inode->i_private = sysfs_get(sd);
inode->i_mapping->a_ops = &sysfs_aops;
inode->i_ino = sd->s_ino;
lockdep_set_class(&inode->i_mutex, &sysfs_inode_imutex_key);
- if (sd->s_iattr) {
+ iattrs = sd->s_iattr;
+ if (iattrs) {
/* sysfs_dirent has non-default attributes
* get them for the new inode from persistent copy
* in sysfs_dirent
*/
- set_inode_attr(inode, sd->s_iattr);
+ set_inode_attr(inode, &iattrs->ia_iattr);
+ if (iattrs->ia_secdata)
+ security_inode_notifysecctx(inode,
+ iattrs->ia_secdata,
+ iattrs->ia_secdata_len);
} else
set_default_inode_attr(inode, sd->s_mode);
-
/* initialize inode according to type */
switch (sysfs_type(sd)) {
case SYSFS_DIR:
#include <linux/kobject.h>
#include <linux/namei.h>
#include <linux/mutex.h>
+#include <linux/security.h>
#include "sysfs.h"
}
const struct inode_operations sysfs_symlink_inode_operations = {
+ .setxattr = sysfs_setxattr,
.readlink = generic_readlink,
.follow_link = sysfs_follow_link,
.put_link = sysfs_put_link,
* This file is released under the GPLv2.
*/
+#include <linux/fs.h>
+
struct sysfs_open_dirent;
/* type-specific structures for sysfs_dirent->s_* union members */
struct hlist_head buffers;
};
+struct sysfs_inode_attrs {
+ struct iattr ia_iattr;
+ void *ia_secdata;
+ u32 ia_secdata_len;
+};
+
/*
* sysfs_dirent - the building block of sysfs hierarchy. Each and
* every sysfs node is represented by single sysfs_dirent.
unsigned int s_flags;
ino_t s_ino;
umode_t s_mode;
- struct iattr *s_iattr;
+ struct sysfs_inode_attrs *s_iattr;
};
#define SD_DEACTIVATED_BIAS INT_MIN
struct inode *sysfs_get_inode(struct sysfs_dirent *sd);
void sysfs_delete_inode(struct inode *inode);
int sysfs_setattr(struct dentry *dentry, struct iattr *iattr);
+int sysfs_setxattr(struct dentry *dentry, const char *name, const void *value,
+ size_t size, int flags);
int sysfs_hash_and_remove(struct sysfs_dirent *dir_sd, const char *name);
int sysfs_inode_init(void);
static int shrink_liability(struct ubifs_info *c, int nr_to_write)
{
int nr_written;
- struct writeback_control wbc = {
- .sync_mode = WB_SYNC_NONE,
- .range_end = LLONG_MAX,
- .nr_to_write = nr_to_write,
- };
-
- generic_sync_sb_inodes(c->vfs_sb, &wbc);
- nr_written = nr_to_write - wbc.nr_to_write;
+ nr_written = writeback_inodes_sb(c->vfs_sb);
if (!nr_written) {
/*
* Re-try again but wait on pages/inodes which are being
* written-back concurrently (e.g., by pdflush).
*/
- memset(&wbc, 0, sizeof(struct writeback_control));
- wbc.sync_mode = WB_SYNC_ALL;
- wbc.range_end = LLONG_MAX;
- wbc.nr_to_write = nr_to_write;
- generic_sync_sb_inodes(c->vfs_sb, &wbc);
- nr_written = nr_to_write - wbc.nr_to_write;
+ nr_written = sync_inodes_sb(c->vfs_sb);
}
dbg_budg("%d pages were written back", nr_written);
{
int i, err;
struct ubifs_info *c = sb->s_fs_info;
- struct writeback_control wbc = {
- .sync_mode = WB_SYNC_ALL,
- .range_start = 0,
- .range_end = LLONG_MAX,
- .nr_to_write = LONG_MAX,
- };
/*
* Zero @wait is just an advisory thing to help the file system shove
* the user be able to get more accurate results of 'statfs()' after
* they synchronize the file system.
*/
- generic_sync_sb_inodes(sb, &wbc);
+ sync_inodes_sb(sb);
/*
* Synchronize write buffers, because 'ubifs_run_commit()' does not
*
* Read-ahead will be disabled because @c->bdi.ra_pages is 0.
*/
+ c->bdi.name = "ubifs",
c->bdi.capabilities = BDI_CAP_MAP_COPY;
c->bdi.unplug_io_fn = default_unplug_io_fn;
err = bdi_init(&c->bdi);
struct udf_inode_info *vati;
uint32_t pos;
struct virtualAllocationTable20 *vat20;
+ sector_t blocks = sb->s_bdev->bd_inode->i_size >> sb->s_blocksize_bits;
/* VAT file entry is in the last recorded block */
ino.partitionReferenceNum = type1_index;
ino.logicalBlockNum = sbi->s_last_block - map->s_partition_root;
sbi->s_vat_inode = udf_iget(sb, &ino);
+ if (!sbi->s_vat_inode &&
+ sbi->s_last_block != blocks - 1) {
+ printk(KERN_NOTICE "UDF-fs: Failed to read VAT inode from the"
+ " last recorded block (%lu), retrying with the last "
+ "block of the device (%lu).\n",
+ (unsigned long)sbi->s_last_block,
+ (unsigned long)blocks - 1);
+ ino.partitionReferenceNum = type1_index;
+ ino.logicalBlockNum = blocks - 1 - map->s_partition_root;
+ sbi->s_vat_inode = udf_iget(sb, &ino);
+ }
if (!sbi->s_vat_inode)
return 1;
return inode_permission(inode, mask);
}
-int
-vfs_setxattr(struct dentry *dentry, const char *name, const void *value,
- size_t size, int flags)
+/**
+ * __vfs_setxattr_noperm - perform setxattr operation without performing
+ * permission checks.
+ *
+ * @dentry - object to perform setxattr on
+ * @name - xattr name to set
+ * @value - value to set @name to
+ * @size - size of @value
+ * @flags - flags to pass into filesystem operations
+ *
+ * returns the result of the internal setxattr or setsecurity operations.
+ *
+ * This function requires the caller to lock the inode's i_mutex before it
+ * is executed. It also assumes that the caller will make the appropriate
+ * permission checks.
+ */
+int __vfs_setxattr_noperm(struct dentry *dentry, const char *name,
+ const void *value, size_t size, int flags)
{
struct inode *inode = dentry->d_inode;
- int error;
-
- error = xattr_permission(inode, name, MAY_WRITE);
- if (error)
- return error;
+ int error = -EOPNOTSUPP;
- mutex_lock(&inode->i_mutex);
- error = security_inode_setxattr(dentry, name, value, size, flags);
- if (error)
- goto out;
- error = -EOPNOTSUPP;
if (inode->i_op->setxattr) {
error = inode->i_op->setxattr(dentry, name, value, size, flags);
if (!error) {
if (!error)
fsnotify_xattr(dentry);
}
+
+ return error;
+}
+
+
+int
+vfs_setxattr(struct dentry *dentry, const char *name, const void *value,
+ size_t size, int flags)
+{
+ struct inode *inode = dentry->d_inode;
+ int error;
+
+ error = xattr_permission(inode, name, MAY_WRITE);
+ if (error)
+ return error;
+
+ mutex_lock(&inode->i_mutex);
+ error = security_inode_setxattr(dentry, name, value, size, flags);
+ if (error)
+ goto out;
+
+ error = __vfs_setxattr_noperm(dentry, name, value, size, flags);
+
out:
mutex_unlock(&inode->i_mutex);
return error;
if (!page_has_buffers(page))
create_empty_buffers(page, 1 << inode->i_blkbits, 0);
+
+ /*
+ * VM calculation for nr_to_write seems off. Bump it way
+ * up, this gets simple streaming writes zippy again.
+ * To be reviewed again after Jens' writeback changes.
+ */
+ wbc->nr_to_write *= 4;
+
/*
* Convert delayed allocate, unwritten or unmapped space
* to real space and flush out to disk.
bp->b_pages = NULL;
bp->b_addr = mem;
- rval = _xfs_buf_get_pages(bp, page_count, 0);
+ rval = _xfs_buf_get_pages(bp, page_count, XBF_DONT_BLOCK);
if (rval)
return rval;
case XFS_IOC_GETVERSION_32:
cmd = _NATIVE_IOC(cmd, long);
return xfs_file_ioctl(filp, cmd, p);
- case XFS_IOC_SWAPEXT: {
+ case XFS_IOC_SWAPEXT_32: {
struct xfs_swapext sxp;
struct compat_xfs_swapext __user *sxu = arg;
kfree(s);
}
-STATIC int
-xfs_vn_permission(
- struct inode *inode,
- int mask)
-{
- return generic_permission(inode, mask, xfs_check_acl);
-}
-
STATIC int
xfs_vn_getattr(
struct vfsmount *mnt,
else
bm.bmv_length = BTOBB(length);
- /* our formatter will tell xfs_getbmap when to stop. */
- bm.bmv_count = MAXEXTNUM;
+ /* We add one because in getbmap world count includes the header */
+ bm.bmv_count = fieinfo->fi_extents_max + 1;
bm.bmv_iflags = BMV_IF_PREALLOC;
if (fieinfo->fi_flags & FIEMAP_FLAG_XATTR)
bm.bmv_iflags |= BMV_IF_ATTRFORK;
}
static const struct inode_operations xfs_inode_operations = {
- .permission = xfs_vn_permission,
+ .check_acl = xfs_check_acl,
.truncate = xfs_vn_truncate,
.getattr = xfs_vn_getattr,
.setattr = xfs_vn_setattr,
.rmdir = xfs_vn_unlink,
.mknod = xfs_vn_mknod,
.rename = xfs_vn_rename,
- .permission = xfs_vn_permission,
+ .check_acl = xfs_check_acl,
.getattr = xfs_vn_getattr,
.setattr = xfs_vn_setattr,
.setxattr = generic_setxattr,
.rmdir = xfs_vn_unlink,
.mknod = xfs_vn_mknod,
.rename = xfs_vn_rename,
- .permission = xfs_vn_permission,
+ .check_acl = xfs_check_acl,
.getattr = xfs_vn_getattr,
.setattr = xfs_vn_setattr,
.setxattr = generic_setxattr,
.readlink = generic_readlink,
.follow_link = xfs_vn_follow_link,
.put_link = xfs_vn_put_link,
- .permission = xfs_vn_permission,
+ .check_acl = xfs_check_acl,
.getattr = xfs_vn_getattr,
.setattr = xfs_vn_setattr,
.setxattr = generic_setxattr,
return 0;
}
+void
+__xfs_inode_set_reclaim_tag(
+ struct xfs_perag *pag,
+ struct xfs_inode *ip)
+{
+ radix_tree_tag_set(&pag->pag_ici_root,
+ XFS_INO_TO_AGINO(ip->i_mount, ip->i_ino),
+ XFS_ICI_RECLAIM_TAG);
+}
+
/*
* We set the inode flag atomically with the radix tree tag.
* Once we get tag lookups on the radix tree, this inode flag
read_lock(&pag->pag_ici_lock);
spin_lock(&ip->i_flags_lock);
- radix_tree_tag_set(&pag->pag_ici_root,
- XFS_INO_TO_AGINO(mp, ip->i_ino), XFS_ICI_RECLAIM_TAG);
+ __xfs_inode_set_reclaim_tag(pag, ip);
__xfs_iflags_set(ip, XFS_IRECLAIMABLE);
spin_unlock(&ip->i_flags_lock);
read_unlock(&pag->pag_ici_lock);
int xfs_reclaim_inodes(struct xfs_mount *mp, int mode);
void xfs_inode_set_reclaim_tag(struct xfs_inode *ip);
+void __xfs_inode_set_reclaim_tag(struct xfs_perag *pag, struct xfs_inode *ip);
void xfs_inode_clear_reclaim_tag(struct xfs_inode *ip);
void __xfs_inode_clear_reclaim_tag(struct xfs_mount *mp, struct xfs_perag *pag,
struct xfs_inode *ip);
dblkno = XFS_FSB_TO_DADDR(mp, map[i].br_startblock);
blkcnt = XFS_FSB_TO_BB(mp, map[i].br_blockcount);
error = xfs_read_buf(mp, mp->m_ddev_targp, dblkno,
- blkcnt, XFS_BUF_LOCK, &bp);
+ blkcnt,
+ XFS_BUF_LOCK | XBF_DONT_BLOCK,
+ &bp);
if (error)
return(error);
dblkno = XFS_FSB_TO_DADDR(mp, map.br_startblock),
blkcnt = XFS_FSB_TO_BB(mp, map.br_blockcount);
- bp = xfs_buf_get_flags(mp->m_ddev_targp, dblkno,
- blkcnt, XFS_BUF_LOCK);
+ bp = xfs_buf_get_flags(mp->m_ddev_targp, dblkno, blkcnt,
+ XFS_BUF_LOCK | XBF_DONT_BLOCK);
ASSERT(bp);
ASSERT(!XFS_BUF_GETERROR(bp));
*/
error = ENOMEM;
subnex = 16;
- map = kmem_alloc(subnex * sizeof(*map), KM_MAYFAIL);
+ map = kmem_alloc(subnex * sizeof(*map), KM_MAYFAIL | KM_NOFS);
if (!map)
goto out_unlock_ilock;
XFS_RANDOM_BTREE_CHECK_SBLOCK))) {
if (bp)
xfs_buftrace("SBTREE ERROR", bp);
- XFS_ERROR_REPORT("xfs_btree_check_sblock", XFS_ERRLEVEL_LOW,
- cur->bc_mp);
+ XFS_CORRUPTION_ERROR("xfs_btree_check_sblock",
+ XFS_ERRLEVEL_LOW, cur->bc_mp, block);
return XFS_ERROR(EFSCORRUPTED);
}
return 0;
xfs_da_state_t *
xfs_da_state_alloc(void)
{
- return kmem_zone_zalloc(xfs_da_state_zone, KM_SLEEP);
+ return kmem_zone_zalloc(xfs_da_state_zone, KM_NOFS);
}
/*
int off;
if (nbuf == 1)
- dabuf = kmem_zone_alloc(xfs_dabuf_zone, KM_SLEEP);
+ dabuf = kmem_zone_alloc(xfs_dabuf_zone, KM_NOFS);
else
- dabuf = kmem_alloc(XFS_DA_BUF_SIZE(nbuf), KM_SLEEP);
+ dabuf = kmem_alloc(XFS_DA_BUF_SIZE(nbuf), KM_NOFS);
dabuf->dirty = 0;
#ifdef XFS_DABUF_DEBUG
dabuf->ra = ra;
!(args->op_flags & XFS_DA_OP_CILOOKUP))
return EEXIST;
- args->value = kmem_alloc(len, KM_MAYFAIL);
+ args->value = kmem_alloc(len, KM_NOFS | KM_MAYFAIL);
if (!args->value)
return ENOMEM;
new = nb - mp->m_sb.sb_dblocks;
oagcount = mp->m_sb.sb_agcount;
if (nagcount > oagcount) {
+ void *new_perag, *old_perag;
+
xfs_filestream_flush(mp);
+
+ new_perag = kmem_zalloc(sizeof(xfs_perag_t) * nagcount,
+ KM_MAYFAIL);
+ if (!new_perag)
+ return XFS_ERROR(ENOMEM);
+
down_write(&mp->m_peraglock);
- mp->m_perag = kmem_realloc(mp->m_perag,
- sizeof(xfs_perag_t) * nagcount,
- sizeof(xfs_perag_t) * oagcount,
- KM_SLEEP);
- memset(&mp->m_perag[oagcount], 0,
- (nagcount - oagcount) * sizeof(xfs_perag_t));
+ memcpy(new_perag, mp->m_perag, sizeof(xfs_perag_t) * oagcount);
+ old_perag = mp->m_perag;
+ mp->m_perag = new_perag;
+
mp->m_flags |= XFS_MOUNT_32BITINODES;
nagimax = xfs_initialize_perag(mp, nagcount);
up_write(&mp->m_peraglock);
+
+ kmem_free(old_perag);
}
tp = xfs_trans_alloc(mp, XFS_TRANS_GROWFS);
tp->t_flags |= XFS_TRANS_RESERVE;
ip = kmem_zone_alloc(xfs_inode_zone, KM_SLEEP);
if (!ip)
return NULL;
+ if (inode_init_always(mp->m_super, VFS_I(ip))) {
+ kmem_zone_free(xfs_inode_zone, ip);
+ return NULL;
+ }
ASSERT(atomic_read(&ip->i_iocount) == 0);
ASSERT(atomic_read(&ip->i_pincount) == 0);
#ifdef XFS_DIR2_TRACE
ip->i_dir_trace = ktrace_alloc(XFS_DIR2_KTRACE_SIZE, KM_NOFS);
#endif
- /*
- * Now initialise the VFS inode. We do this after the xfs_inode
- * initialisation as internal failures will result in ->destroy_inode
- * being called and that will pass down through the reclaim path and
- * free the XFS inode. This path requires the XFS inode to already be
- * initialised. Hence if this call fails, the xfs_inode has already
- * been freed and we should not reference it at all in the error
- * handling.
- */
- if (!inode_init_always(mp->m_super, VFS_I(ip)))
- return NULL;
/* prevent anyone from using this yet */
VFS_I(ip)->i_state = I_NEW|I_LOCK;
return ip;
}
+STATIC void
+xfs_inode_free(
+ struct xfs_inode *ip)
+{
+ switch (ip->i_d.di_mode & S_IFMT) {
+ case S_IFREG:
+ case S_IFDIR:
+ case S_IFLNK:
+ xfs_idestroy_fork(ip, XFS_DATA_FORK);
+ break;
+ }
+
+ if (ip->i_afp)
+ xfs_idestroy_fork(ip, XFS_ATTR_FORK);
+
+#ifdef XFS_INODE_TRACE
+ ktrace_free(ip->i_trace);
+#endif
+#ifdef XFS_BMAP_TRACE
+ ktrace_free(ip->i_xtrace);
+#endif
+#ifdef XFS_BTREE_TRACE
+ ktrace_free(ip->i_btrace);
+#endif
+#ifdef XFS_RW_TRACE
+ ktrace_free(ip->i_rwtrace);
+#endif
+#ifdef XFS_ILOCK_TRACE
+ ktrace_free(ip->i_lock_trace);
+#endif
+#ifdef XFS_DIR2_TRACE
+ ktrace_free(ip->i_dir_trace);
+#endif
+
+ if (ip->i_itemp) {
+ /*
+ * Only if we are shutting down the fs will we see an
+ * inode still in the AIL. If it is there, we should remove
+ * it to prevent a use-after-free from occurring.
+ */
+ xfs_log_item_t *lip = &ip->i_itemp->ili_item;
+ struct xfs_ail *ailp = lip->li_ailp;
+
+ ASSERT(((lip->li_flags & XFS_LI_IN_AIL) == 0) ||
+ XFS_FORCED_SHUTDOWN(ip->i_mount));
+ if (lip->li_flags & XFS_LI_IN_AIL) {
+ spin_lock(&ailp->xa_lock);
+ if (lip->li_flags & XFS_LI_IN_AIL)
+ xfs_trans_ail_delete(ailp, lip);
+ else
+ spin_unlock(&ailp->xa_lock);
+ }
+ xfs_inode_item_destroy(ip);
+ ip->i_itemp = NULL;
+ }
+
+ /* asserts to verify all state is correct here */
+ ASSERT(atomic_read(&ip->i_iocount) == 0);
+ ASSERT(atomic_read(&ip->i_pincount) == 0);
+ ASSERT(!spin_is_locked(&ip->i_flags_lock));
+ ASSERT(completion_done(&ip->i_flush));
+
+ kmem_zone_free(xfs_inode_zone, ip);
+}
+
/*
* Check the validity of the inode we just found it the cache
*/
int flags,
int lock_flags) __releases(pag->pag_ici_lock)
{
+ struct inode *inode = VFS_I(ip);
struct xfs_mount *mp = ip->i_mount;
- int error = EAGAIN;
+ int error;
+
+ spin_lock(&ip->i_flags_lock);
/*
- * If INEW is set this inode is being set up
- * If IRECLAIM is set this inode is being torn down
- * Pause and try again.
+ * If we are racing with another cache hit that is currently
+ * instantiating this inode or currently recycling it out of
+ * reclaimabe state, wait for the initialisation to complete
+ * before continuing.
+ *
+ * XXX(hch): eventually we should do something equivalent to
+ * wait_on_inode to wait for these flags to be cleared
+ * instead of polling for it.
*/
- if (xfs_iflags_test(ip, (XFS_INEW|XFS_IRECLAIM))) {
+ if (ip->i_flags & (XFS_INEW|XFS_IRECLAIM)) {
XFS_STATS_INC(xs_ig_frecycle);
+ error = EAGAIN;
goto out_error;
}
- /* If IRECLAIMABLE is set, we've torn down the vfs inode part */
- if (xfs_iflags_test(ip, XFS_IRECLAIMABLE)) {
-
- /*
- * If lookup is racing with unlink, then we should return an
- * error immediately so we don't remove it from the reclaim
- * list and potentially leak the inode.
- */
- if ((ip->i_d.di_mode == 0) && !(flags & XFS_IGET_CREATE)) {
- error = ENOENT;
- goto out_error;
- }
+ /*
+ * If lookup is racing with unlink return an error immediately.
+ */
+ if (ip->i_d.di_mode == 0 && !(flags & XFS_IGET_CREATE)) {
+ error = ENOENT;
+ goto out_error;
+ }
+ /*
+ * If IRECLAIMABLE is set, we've torn down the VFS inode already.
+ * Need to carefully get it back into useable state.
+ */
+ if (ip->i_flags & XFS_IRECLAIMABLE) {
xfs_itrace_exit_tag(ip, "xfs_iget.alloc");
/*
- * We need to re-initialise the VFS inode as it has been
- * 'freed' by the VFS. Do this here so we can deal with
- * errors cleanly, then tag it so it can be set up correctly
- * later.
+ * We need to set XFS_INEW atomically with clearing the
+ * reclaimable tag so that we do have an indicator of the
+ * inode still being initialized.
*/
- if (!inode_init_always(mp->m_super, VFS_I(ip))) {
- error = ENOMEM;
- goto out_error;
- }
+ ip->i_flags |= XFS_INEW;
+ ip->i_flags &= ~XFS_IRECLAIMABLE;
+ __xfs_inode_clear_reclaim_tag(mp, pag, ip);
- /*
- * We must set the XFS_INEW flag before clearing the
- * XFS_IRECLAIMABLE flag so that if a racing lookup does
- * not find the XFS_IRECLAIMABLE above but has the igrab()
- * below succeed we can safely check XFS_INEW to detect
- * that this inode is still being initialised.
- */
- xfs_iflags_set(ip, XFS_INEW);
- xfs_iflags_clear(ip, XFS_IRECLAIMABLE);
+ spin_unlock(&ip->i_flags_lock);
+ read_unlock(&pag->pag_ici_lock);
- /* clear the radix tree reclaim flag as well. */
- __xfs_inode_clear_reclaim_tag(mp, pag, ip);
- } else if (!igrab(VFS_I(ip))) {
+ error = -inode_init_always(mp->m_super, inode);
+ if (error) {
+ /*
+ * Re-initializing the inode failed, and we are in deep
+ * trouble. Try to re-add it to the reclaim list.
+ */
+ read_lock(&pag->pag_ici_lock);
+ spin_lock(&ip->i_flags_lock);
+
+ ip->i_flags &= ~XFS_INEW;
+ ip->i_flags |= XFS_IRECLAIMABLE;
+ __xfs_inode_set_reclaim_tag(pag, ip);
+ goto out_error;
+ }
+ inode->i_state = I_LOCK|I_NEW;
+ } else {
/* If the VFS inode is being torn down, pause and try again. */
- XFS_STATS_INC(xs_ig_frecycle);
- goto out_error;
- } else if (xfs_iflags_test(ip, XFS_INEW)) {
- /*
- * We are racing with another cache hit that is
- * currently recycling this inode out of the XFS_IRECLAIMABLE
- * state. Wait for the initialisation to complete before
- * continuing.
- */
- wait_on_inode(VFS_I(ip));
- }
+ if (!igrab(inode)) {
+ error = EAGAIN;
+ goto out_error;
+ }
- if (ip->i_d.di_mode == 0 && !(flags & XFS_IGET_CREATE)) {
- error = ENOENT;
- iput(VFS_I(ip));
- goto out_error;
+ /* We've got a live one. */
+ spin_unlock(&ip->i_flags_lock);
+ read_unlock(&pag->pag_ici_lock);
}
- /* We've got a live one. */
- read_unlock(&pag->pag_ici_lock);
-
if (lock_flags != 0)
xfs_ilock(ip, lock_flags);
return 0;
out_error:
+ spin_unlock(&ip->i_flags_lock);
read_unlock(&pag->pag_ici_lock);
return error;
}
if (lock_flags)
xfs_iunlock(ip, lock_flags);
out_destroy:
- xfs_destroy_inode(ip);
+ __destroy_inode(VFS_I(ip));
+ xfs_inode_free(ip);
return error;
}
xfs_qm_dqdetach(ip);
xfs_iunlock(ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
- switch (ip->i_d.di_mode & S_IFMT) {
- case S_IFREG:
- case S_IFDIR:
- case S_IFLNK:
- xfs_idestroy_fork(ip, XFS_DATA_FORK);
- break;
- }
-
- if (ip->i_afp)
- xfs_idestroy_fork(ip, XFS_ATTR_FORK);
-
-#ifdef XFS_INODE_TRACE
- ktrace_free(ip->i_trace);
-#endif
-#ifdef XFS_BMAP_TRACE
- ktrace_free(ip->i_xtrace);
-#endif
-#ifdef XFS_BTREE_TRACE
- ktrace_free(ip->i_btrace);
-#endif
-#ifdef XFS_RW_TRACE
- ktrace_free(ip->i_rwtrace);
-#endif
-#ifdef XFS_ILOCK_TRACE
- ktrace_free(ip->i_lock_trace);
-#endif
-#ifdef XFS_DIR2_TRACE
- ktrace_free(ip->i_dir_trace);
-#endif
- if (ip->i_itemp) {
- /*
- * Only if we are shutting down the fs will we see an
- * inode still in the AIL. If it is there, we should remove
- * it to prevent a use-after-free from occurring.
- */
- xfs_log_item_t *lip = &ip->i_itemp->ili_item;
- struct xfs_ail *ailp = lip->li_ailp;
-
- ASSERT(((lip->li_flags & XFS_LI_IN_AIL) == 0) ||
- XFS_FORCED_SHUTDOWN(ip->i_mount));
- if (lip->li_flags & XFS_LI_IN_AIL) {
- spin_lock(&ailp->xa_lock);
- if (lip->li_flags & XFS_LI_IN_AIL)
- xfs_trans_ail_delete(ailp, lip);
- else
- spin_unlock(&ailp->xa_lock);
- }
- xfs_inode_item_destroy(ip);
- ip->i_itemp = NULL;
- }
- /* asserts to verify all state is correct here */
- ASSERT(atomic_read(&ip->i_iocount) == 0);
- ASSERT(atomic_read(&ip->i_pincount) == 0);
- ASSERT(!spin_is_locked(&ip->i_flags_lock));
- ASSERT(completion_done(&ip->i_flush));
- kmem_zone_free(xfs_inode_zone, ip);
+ xfs_inode_free(ip);
}
/*
return XFS_ERROR(EFSCORRUPTED);
}
+ if (unlikely((ip->i_d.di_flags & XFS_DIFLAG_REALTIME) &&
+ !ip->i_mount->m_rtdev_targp)) {
+ xfs_fs_repair_cmn_err(CE_WARN, ip->i_mount,
+ "corrupt dinode %Lu, has realtime flag set.",
+ ip->i_ino);
+ XFS_CORRUPTION_ERROR("xfs_iformat(realtime)",
+ XFS_ERRLEVEL_LOW, ip->i_mount, dip);
+ return XFS_ERROR(EFSCORRUPTED);
+ }
+
switch (ip->i_d.di_mode & S_IFMT) {
case S_IFIFO:
case S_IFCHR:
return &ip->i_vnode;
}
-/*
- * Get rid of a partially initialized inode.
- *
- * We have to go through destroy_inode to make sure allocations
- * from init_inode_always like the security data are undone.
- *
- * We mark the inode bad so that it takes the short cut in
- * the reclaim path instead of going through the flush path
- * which doesn't make sense for an inode that has never seen the
- * light of day.
- */
-static inline void xfs_destroy_inode(struct xfs_inode *ip)
-{
- make_bad_inode(VFS_I(ip));
- return destroy_inode(VFS_I(ip));
-}
-
/*
* i_flags helper functions
*/
STATIC void
xlog_state_want_sync(xlog_t *log, xlog_in_core_t *iclog)
{
- ASSERT(spin_is_locked(&log->l_icloglock));
+ assert_spin_locked(&log->l_icloglock);
if (iclog->ic_state == XLOG_STATE_ACTIVE) {
xlog_state_switch_iclogs(log, iclog, 0);
d = XFS_FSB_TO_DADDR(mp, mval[n].br_startblock);
byte_cnt = XFS_FSB_TO_B(mp, mval[n].br_blockcount);
- bp = xfs_buf_read(mp->m_ddev_targp, d, BTOBB(byte_cnt), 0);
+ bp = xfs_buf_read_flags(mp->m_ddev_targp, d, BTOBB(byte_cnt),
+ XBF_LOCK | XBF_MAPPED |
+ XBF_DONT_BLOCK);
error = XFS_BUF_GETERROR(bp);
if (error) {
xfs_ioerror_alert("xfs_readlink",
acpi_status acpi_os_validate_interface(char *interface);
acpi_status acpi_osi_invalidate(char* interface);
+acpi_status
+acpi_os_validate_address(u8 space_id, acpi_physical_address address,
+ acpi_size length, char *name);
+
u64 acpi_os_get_timer(void);
acpi_status acpi_os_signal(u32 function, void *info);
cpumask_var_t shared_cpu_map;
int (*acpi_processor_get_throttling) (struct acpi_processor * pr);
int (*acpi_processor_set_throttling) (struct acpi_processor * pr,
- int state);
+ int state, bool force);
u32 address;
u8 duty_offset;
/* in processor_throttling.c */
int acpi_processor_tstate_has_changed(struct acpi_processor *pr);
int acpi_processor_get_throttling_info(struct acpi_processor *pr);
-extern int acpi_processor_set_throttling(struct acpi_processor *pr, int state);
+extern int acpi_processor_set_throttling(struct acpi_processor *pr,
+ int state, bool force);
extern const struct file_operations acpi_processor_throttling_fops;
extern void acpi_processor_throttling_init(void);
/* in processor_idle.c */
#define pud_page_vaddr(pud) pgd_page_vaddr(pud)
#undef pud_free_tlb
-#define pud_free_tlb(tlb, x) do { } while (0)
+#define pud_free_tlb(tlb, x, addr) do { } while (0)
#define pud_free(mm, x) do { } while (0)
-#define __pud_free_tlb(tlb, x) do { } while (0)
+#define __pud_free_tlb(tlb, x, addr) do { } while (0)
#undef pud_addr_end
#define pud_addr_end(addr, end) (end)
if (ops->sync_single_for_cpu)
ops->sync_single_for_cpu(dev, addr, size, dir);
debug_dma_sync_single_for_cpu(dev, addr, size, dir);
- flush_write_buffers();
}
static inline void dma_sync_single_for_device(struct device *dev,
if (ops->sync_single_for_device)
ops->sync_single_for_device(dev, addr, size, dir);
debug_dma_sync_single_for_device(dev, addr, size, dir);
- flush_write_buffers();
}
static inline void dma_sync_single_range_for_cpu(struct device *dev,
ops->sync_single_range_for_cpu(dev, addr, offset, size, dir);
debug_dma_sync_single_range_for_cpu(dev, addr, offset, size, dir);
- flush_write_buffers();
} else
dma_sync_single_for_cpu(dev, addr, size, dir);
}
ops->sync_single_range_for_device(dev, addr, offset, size, dir);
debug_dma_sync_single_range_for_device(dev, addr, offset, size, dir);
- flush_write_buffers();
} else
dma_sync_single_for_device(dev, addr, size, dir);
}
if (ops->sync_sg_for_cpu)
ops->sync_sg_for_cpu(dev, sg, nelems, dir);
debug_dma_sync_sg_for_cpu(dev, sg, nelems, dir);
- flush_write_buffers();
}
static inline void
ops->sync_sg_for_device(dev, sg, nelems, dir);
debug_dma_sync_sg_for_device(dev, sg, nelems, dir);
- flush_write_buffers();
}
#define dma_map_single(d, a, s, r) dma_map_single_attrs(d, a, s, r, NULL)
static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
{
}
-#define __pmd_free_tlb(tlb, x) do { } while (0)
+#define __pmd_free_tlb(tlb, x, a) do { } while (0)
#undef pmd_addr_end
#define pmd_addr_end(addr, end) (end)
*/
#define pud_alloc_one(mm, address) NULL
#define pud_free(mm, x) do { } while (0)
-#define __pud_free_tlb(tlb, x) do { } while (0)
+#define __pud_free_tlb(tlb, x, a) do { } while (0)
#undef pud_addr_end
#define pud_addr_end(addr, end) (end)
__tlb_remove_tlb_entry(tlb, ptep, address); \
} while (0)
-#define pte_free_tlb(tlb, ptep) \
+#define pte_free_tlb(tlb, ptep, address) \
do { \
tlb->need_flush = 1; \
- __pte_free_tlb(tlb, ptep); \
+ __pte_free_tlb(tlb, ptep, address); \
} while (0)
#ifndef __ARCH_HAS_4LEVEL_HACK
-#define pud_free_tlb(tlb, pudp) \
+#define pud_free_tlb(tlb, pudp, address) \
do { \
tlb->need_flush = 1; \
- __pud_free_tlb(tlb, pudp); \
+ __pud_free_tlb(tlb, pudp, address); \
} while (0)
#endif
-#define pmd_free_tlb(tlb, pmdp) \
+#define pmd_free_tlb(tlb, pmdp, address) \
do { \
tlb->need_flush = 1; \
- __pmd_free_tlb(tlb, pmdp); \
+ __pmd_free_tlb(tlb, pmdp, address); \
} while (0)
#define tlb_migrate_finish(mm) do {} while (0)
* EXCEPTION_TABLE(...)
* NOTES
*
- * __bss_start = .;
- * BSS_SECTION(0, 0)
- * __bss_stop = .;
+ * BSS_SECTION(0, 0, 0)
* _end = .;
*
* /DISCARD/ : {
* bss (Block Started by Symbol) - uninitialized data
* zeroed during startup
*/
-#define SBSS \
+#define SBSS(sbss_align) \
+ . = ALIGN(sbss_align); \
.sbss : AT(ADDR(.sbss) - LOAD_OFFSET) { \
*(.sbss) \
*(.scommon) \
#define BSS(bss_align) \
. = ALIGN(bss_align); \
.bss : AT(ADDR(.bss) - LOAD_OFFSET) { \
- VMLINUX_SYMBOL(__bss_start) = .; \
*(.bss.page_aligned) \
*(.dynbss) \
*(.bss) \
*(COMMON) \
- VMLINUX_SYMBOL(__bss_stop) = .; \
}
/*
INIT_RAM_FS \
}
-#define BSS_SECTION(sbss_align, bss_align) \
- SBSS \
+#define BSS_SECTION(sbss_align, bss_align, stop_align) \
+ . = ALIGN(sbss_align); \
+ VMLINUX_SYMBOL(__bss_start) = .; \
+ SBSS(sbss_align) \
BSS(bss_align) \
- . = ALIGN(4);
-
+ . = ALIGN(stop_align); \
+ VMLINUX_SYMBOL(__bss_stop) = .;
struct crypto_type {
unsigned int (*ctxsize)(struct crypto_alg *alg, u32 type, u32 mask);
- unsigned int (*extsize)(struct crypto_alg *alg,
- const struct crypto_type *frontend);
+ unsigned int (*extsize)(struct crypto_alg *alg);
int (*init)(struct crypto_tfm *tfm, u32 type, u32 mask);
- int (*init_tfm)(struct crypto_tfm *tfm,
- const struct crypto_type *frontend);
+ int (*init_tfm)(struct crypto_tfm *tfm);
void (*show)(struct seq_file *m, struct crypto_alg *alg);
struct crypto_alg *(*lookup)(const char *name, u32 type, u32 mask);
struct crypto_instance *(*alloc)(struct rtattr **tb);
void (*free)(struct crypto_instance *inst);
+ int (*create)(struct crypto_template *tmpl, struct rtattr **tb);
char name[CRYPTO_MAX_ALG_NAME];
};
struct list_head list;
struct crypto_alg *alg;
struct crypto_instance *inst;
+ const struct crypto_type *frontend;
u32 mask;
};
void crypto_unregister_template(struct crypto_template *tmpl);
struct crypto_template *crypto_lookup_template(const char *name);
+int crypto_register_instance(struct crypto_template *tmpl,
+ struct crypto_instance *inst);
+
int crypto_init_spawn(struct crypto_spawn *spawn, struct crypto_alg *alg,
struct crypto_instance *inst, u32 mask);
+int crypto_init_spawn2(struct crypto_spawn *spawn, struct crypto_alg *alg,
+ struct crypto_instance *inst,
+ const struct crypto_type *frontend);
+
void crypto_drop_spawn(struct crypto_spawn *spawn);
struct crypto_tfm *crypto_spawn_tfm(struct crypto_spawn *spawn, u32 type,
u32 mask);
+void *crypto_spawn_tfm2(struct crypto_spawn *spawn);
static inline void crypto_set_spawn(struct crypto_spawn *spawn,
struct crypto_instance *inst)
struct crypto_attr_type *crypto_get_attr_type(struct rtattr **tb);
int crypto_check_attr_type(struct rtattr **tb, u32 type);
const char *crypto_attr_alg_name(struct rtattr *rta);
-struct crypto_alg *crypto_attr_alg(struct rtattr *rta, u32 type, u32 mask);
+struct crypto_alg *crypto_attr_alg2(struct rtattr *rta,
+ const struct crypto_type *frontend,
+ u32 type, u32 mask);
+
+static inline struct crypto_alg *crypto_attr_alg(struct rtattr *rta,
+ u32 type, u32 mask)
+{
+ return crypto_attr_alg2(rta, NULL, type, mask);
+}
+
int crypto_attr_u32(struct rtattr *rta, u32 *num);
+void *crypto_alloc_instance2(const char *name, struct crypto_alg *alg,
+ unsigned int head);
struct crypto_instance *crypto_alloc_instance(const char *name,
struct crypto_alg *alg);
void crypto_init_queue(struct crypto_queue *queue, unsigned int max_qlen);
int crypto_enqueue_request(struct crypto_queue *queue,
struct crypto_async_request *request);
+void *__crypto_dequeue_request(struct crypto_queue *queue, unsigned int offset);
struct crypto_async_request *crypto_dequeue_request(struct crypto_queue *queue);
int crypto_tfm_in_queue(struct crypto_queue *queue, struct crypto_tfm *tfm);
static inline void *crypto_tfm_ctx_aligned(struct crypto_tfm *tfm)
{
- unsigned long addr = (unsigned long)crypto_tfm_ctx(tfm);
- unsigned long align = crypto_tfm_alg_alignmask(tfm);
-
- if (align <= crypto_tfm_ctx_alignment())
- align = 1;
- return (void *)ALIGN(addr, align);
+ return PTR_ALIGN(crypto_tfm_ctx(tfm),
+ crypto_tfm_alg_alignmask(tfm) + 1);
}
static inline struct crypto_instance *crypto_tfm_alg_instance(
#include <linux/crypto.h>
#include <linux/kernel.h>
+#include <crypto/hash.h>
struct cryptd_ablkcipher {
struct crypto_ablkcipher base;
struct crypto_blkcipher *cryptd_ablkcipher_child(struct cryptd_ablkcipher *tfm);
void cryptd_free_ablkcipher(struct cryptd_ablkcipher *tfm);
+struct cryptd_ahash {
+ struct crypto_ahash base;
+};
+
+static inline struct cryptd_ahash *__cryptd_ahash_cast(
+ struct crypto_ahash *tfm)
+{
+ return (struct cryptd_ahash *)tfm;
+}
+
+/* alg_name should be algorithm to be cryptd-ed */
+struct cryptd_ahash *cryptd_alloc_ahash(const char *alg_name,
+ u32 type, u32 mask);
+struct crypto_shash *cryptd_ahash_child(struct cryptd_ahash *tfm);
+void cryptd_free_ahash(struct cryptd_ahash *tfm);
+
#endif
#include <linux/crypto.h>
+struct crypto_ahash;
+
+struct hash_alg_common {
+ unsigned int digestsize;
+ unsigned int statesize;
+
+ struct crypto_alg base;
+};
+
+struct ahash_request {
+ struct crypto_async_request base;
+
+ unsigned int nbytes;
+ struct scatterlist *src;
+ u8 *result;
+
+ /* This field may only be used by the ahash API code. */
+ void *priv;
+
+ void *__ctx[] CRYPTO_MINALIGN_ATTR;
+};
+
+struct ahash_alg {
+ int (*init)(struct ahash_request *req);
+ int (*update)(struct ahash_request *req);
+ int (*final)(struct ahash_request *req);
+ int (*finup)(struct ahash_request *req);
+ int (*digest)(struct ahash_request *req);
+ int (*export)(struct ahash_request *req, void *out);
+ int (*import)(struct ahash_request *req, const void *in);
+ int (*setkey)(struct crypto_ahash *tfm, const u8 *key,
+ unsigned int keylen);
+
+ struct hash_alg_common halg;
+};
+
struct shash_desc {
struct crypto_shash *tfm;
u32 flags;
struct shash_alg {
int (*init)(struct shash_desc *desc);
- int (*reinit)(struct shash_desc *desc);
int (*update)(struct shash_desc *desc, const u8 *data,
unsigned int len);
int (*final)(struct shash_desc *desc, u8 *out);
unsigned int len, u8 *out);
int (*digest)(struct shash_desc *desc, const u8 *data,
unsigned int len, u8 *out);
+ int (*export)(struct shash_desc *desc, void *out);
+ int (*import)(struct shash_desc *desc, const void *in);
int (*setkey)(struct crypto_shash *tfm, const u8 *key,
unsigned int keylen);
unsigned int descsize;
- unsigned int digestsize;
+
+ /* These fields must match hash_alg_common. */
+ unsigned int digestsize
+ __attribute__ ((aligned(__alignof__(struct hash_alg_common))));
+ unsigned int statesize;
struct crypto_alg base;
};
struct crypto_ahash {
+ int (*init)(struct ahash_request *req);
+ int (*update)(struct ahash_request *req);
+ int (*final)(struct ahash_request *req);
+ int (*finup)(struct ahash_request *req);
+ int (*digest)(struct ahash_request *req);
+ int (*export)(struct ahash_request *req, void *out);
+ int (*import)(struct ahash_request *req, const void *in);
+ int (*setkey)(struct crypto_ahash *tfm, const u8 *key,
+ unsigned int keylen);
+
+ unsigned int reqsize;
struct crypto_tfm base;
};
struct crypto_shash {
+ unsigned int descsize;
struct crypto_tfm base;
};
static inline struct crypto_ahash *__crypto_ahash_cast(struct crypto_tfm *tfm)
{
- return (struct crypto_ahash *)tfm;
+ return container_of(tfm, struct crypto_ahash, base);
}
-static inline struct crypto_ahash *crypto_alloc_ahash(const char *alg_name,
- u32 type, u32 mask)
-{
- type &= ~CRYPTO_ALG_TYPE_MASK;
- mask &= ~CRYPTO_ALG_TYPE_MASK;
- type |= CRYPTO_ALG_TYPE_AHASH;
- mask |= CRYPTO_ALG_TYPE_AHASH_MASK;
-
- return __crypto_ahash_cast(crypto_alloc_base(alg_name, type, mask));
-}
+struct crypto_ahash *crypto_alloc_ahash(const char *alg_name, u32 type,
+ u32 mask);
static inline struct crypto_tfm *crypto_ahash_tfm(struct crypto_ahash *tfm)
{
static inline void crypto_free_ahash(struct crypto_ahash *tfm)
{
- crypto_free_tfm(crypto_ahash_tfm(tfm));
+ crypto_destroy_tfm(tfm, crypto_ahash_tfm(tfm));
}
static inline unsigned int crypto_ahash_alignmask(
return crypto_tfm_alg_alignmask(crypto_ahash_tfm(tfm));
}
-static inline struct ahash_tfm *crypto_ahash_crt(struct crypto_ahash *tfm)
+static inline struct hash_alg_common *__crypto_hash_alg_common(
+ struct crypto_alg *alg)
+{
+ return container_of(alg, struct hash_alg_common, base);
+}
+
+static inline struct hash_alg_common *crypto_hash_alg_common(
+ struct crypto_ahash *tfm)
{
- return &crypto_ahash_tfm(tfm)->crt_ahash;
+ return __crypto_hash_alg_common(crypto_ahash_tfm(tfm)->__crt_alg);
}
static inline unsigned int crypto_ahash_digestsize(struct crypto_ahash *tfm)
{
- return crypto_ahash_crt(tfm)->digestsize;
+ return crypto_hash_alg_common(tfm)->digestsize;
+}
+
+static inline unsigned int crypto_ahash_statesize(struct crypto_ahash *tfm)
+{
+ return crypto_hash_alg_common(tfm)->statesize;
}
static inline u32 crypto_ahash_get_flags(struct crypto_ahash *tfm)
static inline unsigned int crypto_ahash_reqsize(struct crypto_ahash *tfm)
{
- return crypto_ahash_crt(tfm)->reqsize;
+ return tfm->reqsize;
}
static inline void *ahash_request_ctx(struct ahash_request *req)
return req->__ctx;
}
-static inline int crypto_ahash_setkey(struct crypto_ahash *tfm,
- const u8 *key, unsigned int keylen)
-{
- struct ahash_tfm *crt = crypto_ahash_crt(tfm);
-
- return crt->setkey(tfm, key, keylen);
-}
+int crypto_ahash_setkey(struct crypto_ahash *tfm, const u8 *key,
+ unsigned int keylen);
+int crypto_ahash_finup(struct ahash_request *req);
+int crypto_ahash_final(struct ahash_request *req);
+int crypto_ahash_digest(struct ahash_request *req);
-static inline int crypto_ahash_digest(struct ahash_request *req)
+static inline int crypto_ahash_export(struct ahash_request *req, void *out)
{
- struct ahash_tfm *crt = crypto_ahash_crt(crypto_ahash_reqtfm(req));
- return crt->digest(req);
+ return crypto_ahash_reqtfm(req)->export(req, out);
}
-static inline void crypto_ahash_export(struct ahash_request *req, u8 *out)
+static inline int crypto_ahash_import(struct ahash_request *req, const void *in)
{
- memcpy(out, ahash_request_ctx(req),
- crypto_ahash_reqsize(crypto_ahash_reqtfm(req)));
+ return crypto_ahash_reqtfm(req)->import(req, in);
}
-int crypto_ahash_import(struct ahash_request *req, const u8 *in);
-
static inline int crypto_ahash_init(struct ahash_request *req)
{
- struct ahash_tfm *crt = crypto_ahash_crt(crypto_ahash_reqtfm(req));
- return crt->init(req);
+ return crypto_ahash_reqtfm(req)->init(req);
}
static inline int crypto_ahash_update(struct ahash_request *req)
{
- struct ahash_tfm *crt = crypto_ahash_crt(crypto_ahash_reqtfm(req));
- return crt->update(req);
-}
-
-static inline int crypto_ahash_final(struct ahash_request *req)
-{
- struct ahash_tfm *crt = crypto_ahash_crt(crypto_ahash_reqtfm(req));
- return crt->final(req);
+ return crypto_ahash_reqtfm(req)->update(req);
}
static inline void ahash_request_set_tfm(struct ahash_request *req,
static inline void ahash_request_free(struct ahash_request *req)
{
- kfree(req);
+ kzfree(req);
}
static inline struct ahash_request *ahash_request_cast(
return crypto_shash_alg(tfm)->digestsize;
}
+static inline unsigned int crypto_shash_statesize(struct crypto_shash *tfm)
+{
+ return crypto_shash_alg(tfm)->statesize;
+}
+
static inline u32 crypto_shash_get_flags(struct crypto_shash *tfm)
{
return crypto_tfm_get_flags(crypto_shash_tfm(tfm));
static inline unsigned int crypto_shash_descsize(struct crypto_shash *tfm)
{
- return crypto_shash_alg(tfm)->descsize;
+ return tfm->descsize;
}
static inline void *shash_desc_ctx(struct shash_desc *desc)
int crypto_shash_digest(struct shash_desc *desc, const u8 *data,
unsigned int len, u8 *out);
-static inline void crypto_shash_export(struct shash_desc *desc, u8 *out)
+static inline int crypto_shash_export(struct shash_desc *desc, void *out)
{
- memcpy(out, shash_desc_ctx(desc), crypto_shash_descsize(desc->tfm));
+ return crypto_shash_alg(desc->tfm)->export(desc, out);
}
-int crypto_shash_import(struct shash_desc *desc, const u8 *in);
+static inline int crypto_shash_import(struct shash_desc *desc, const void *in)
+{
+ return crypto_shash_alg(desc->tfm)->import(desc, in);
+}
static inline int crypto_shash_init(struct shash_desc *desc)
{
unsigned int flags;
};
+struct ahash_instance {
+ struct ahash_alg alg;
+};
+
+struct shash_instance {
+ struct shash_alg alg;
+};
+
+struct crypto_ahash_spawn {
+ struct crypto_spawn base;
+};
+
+struct crypto_shash_spawn {
+ struct crypto_spawn base;
+};
+
extern const struct crypto_type crypto_ahash_type;
int crypto_hash_walk_done(struct crypto_hash_walk *walk, int err);
struct crypto_hash_walk *walk,
struct scatterlist *sg, unsigned int len);
+static inline int crypto_hash_walk_last(struct crypto_hash_walk *walk)
+{
+ return !(walk->entrylen | walk->total);
+}
+
+int crypto_register_ahash(struct ahash_alg *alg);
+int crypto_unregister_ahash(struct ahash_alg *alg);
+int ahash_register_instance(struct crypto_template *tmpl,
+ struct ahash_instance *inst);
+void ahash_free_instance(struct crypto_instance *inst);
+
+int crypto_init_ahash_spawn(struct crypto_ahash_spawn *spawn,
+ struct hash_alg_common *alg,
+ struct crypto_instance *inst);
+
+static inline void crypto_drop_ahash(struct crypto_ahash_spawn *spawn)
+{
+ crypto_drop_spawn(&spawn->base);
+}
+
+struct hash_alg_common *ahash_attr_alg(struct rtattr *rta, u32 type, u32 mask);
+
int crypto_register_shash(struct shash_alg *alg);
int crypto_unregister_shash(struct shash_alg *alg);
+int shash_register_instance(struct crypto_template *tmpl,
+ struct shash_instance *inst);
+void shash_free_instance(struct crypto_instance *inst);
+
+int crypto_init_shash_spawn(struct crypto_shash_spawn *spawn,
+ struct shash_alg *alg,
+ struct crypto_instance *inst);
+
+static inline void crypto_drop_shash(struct crypto_shash_spawn *spawn)
+{
+ crypto_drop_spawn(&spawn->base);
+}
+
+struct shash_alg *shash_attr_alg(struct rtattr *rta, u32 type, u32 mask);
+
+int shash_ahash_update(struct ahash_request *req, struct shash_desc *desc);
+int shash_ahash_finup(struct ahash_request *req, struct shash_desc *desc);
+int shash_ahash_digest(struct ahash_request *req, struct shash_desc *desc);
+
+int crypto_init_shash_ops_async(struct crypto_tfm *tfm);
static inline void *crypto_ahash_ctx(struct crypto_ahash *tfm)
{
- return crypto_tfm_ctx(&tfm->base);
+ return crypto_tfm_ctx(crypto_ahash_tfm(tfm));
+}
+
+static inline struct ahash_alg *__crypto_ahash_alg(struct crypto_alg *alg)
+{
+ return container_of(__crypto_hash_alg_common(alg), struct ahash_alg,
+ halg);
+}
+
+static inline void crypto_ahash_set_reqsize(struct crypto_ahash *tfm,
+ unsigned int reqsize)
+{
+ tfm->reqsize = reqsize;
+}
+
+static inline struct crypto_instance *ahash_crypto_instance(
+ struct ahash_instance *inst)
+{
+ return container_of(&inst->alg.halg.base, struct crypto_instance, alg);
}
-static inline struct ahash_alg *crypto_ahash_alg(
- struct crypto_ahash *tfm)
+static inline struct ahash_instance *ahash_instance(
+ struct crypto_instance *inst)
{
- return &crypto_ahash_tfm(tfm)->__crt_alg->cra_ahash;
+ return container_of(&inst->alg, struct ahash_instance, alg.halg.base);
+}
+
+static inline void *ahash_instance_ctx(struct ahash_instance *inst)
+{
+ return crypto_instance_ctx(ahash_crypto_instance(inst));
+}
+
+static inline unsigned int ahash_instance_headroom(void)
+{
+ return sizeof(struct ahash_alg) - sizeof(struct crypto_alg);
+}
+
+static inline struct ahash_instance *ahash_alloc_instance(
+ const char *name, struct crypto_alg *alg)
+{
+ return crypto_alloc_instance2(name, alg, ahash_instance_headroom());
+}
+
+static inline struct crypto_ahash *crypto_spawn_ahash(
+ struct crypto_ahash_spawn *spawn)
+{
+ return crypto_spawn_tfm2(&spawn->base);
}
static inline int ahash_enqueue_request(struct crypto_queue *queue,
return crypto_tfm_ctx(&tfm->base);
}
+static inline struct crypto_instance *shash_crypto_instance(
+ struct shash_instance *inst)
+{
+ return container_of(&inst->alg.base, struct crypto_instance, alg);
+}
+
+static inline struct shash_instance *shash_instance(
+ struct crypto_instance *inst)
+{
+ return container_of(__crypto_shash_alg(&inst->alg),
+ struct shash_instance, alg);
+}
+
+static inline void *shash_instance_ctx(struct shash_instance *inst)
+{
+ return crypto_instance_ctx(shash_crypto_instance(inst));
+}
+
+static inline struct shash_instance *shash_alloc_instance(
+ const char *name, struct crypto_alg *alg)
+{
+ return crypto_alloc_instance2(name, alg,
+ sizeof(struct shash_alg) - sizeof(*alg));
+}
+
+static inline struct crypto_shash *crypto_spawn_shash(
+ struct crypto_shash_spawn *spawn)
+{
+ return crypto_spawn_tfm2(&spawn->base);
+}
+
+static inline void *crypto_shash_ctx_aligned(struct crypto_shash *tfm)
+{
+ return crypto_tfm_ctx_aligned(&tfm->base);
+}
+
+static inline struct crypto_shash *__crypto_shash_cast(struct crypto_tfm *tfm)
+{
+ return container_of(tfm, struct crypto_shash, base);
+}
+
#endif /* _CRYPTO_INTERNAL_HASH_H */
static inline struct skcipher_givcrypt_request *skcipher_dequeue_givcrypt(
struct crypto_queue *queue)
{
- return container_of(ablkcipher_dequeue_request(queue),
- struct skcipher_givcrypt_request, creq);
+ return __crypto_dequeue_request(
+ queue, offsetof(struct skcipher_givcrypt_request, creq.base));
}
static inline void *skcipher_givcrypt_reqctx(
#ifndef _CRYPTO_SHA_H
#define _CRYPTO_SHA_H
+#include <linux/types.h>
+
#define SHA1_DIGEST_SIZE 20
#define SHA1_BLOCK_SIZE 64
#define SHA512_H6 0x1f83d9abfb41bd6bULL
#define SHA512_H7 0x5be0cd19137e2179ULL
+struct sha1_state {
+ u64 count;
+ u32 state[SHA1_DIGEST_SIZE / 4];
+ u8 buffer[SHA1_BLOCK_SIZE];
+};
+
+struct sha256_state {
+ u64 count;
+ u32 state[SHA256_DIGEST_SIZE / 4];
+ u8 buf[SHA256_BLOCK_SIZE];
+};
+
+struct sha512_state {
+ u64 count[2];
+ u64 state[SHA512_DIGEST_SIZE / 8];
+ u8 buf[SHA512_BLOCK_SIZE];
+};
+
#endif
--- /dev/null
+/*
+ * Modified to interface to the Linux kernel
+ * Copyright (c) 2009, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ */
+
+#ifndef __CRYPTO_VMAC_H
+#define __CRYPTO_VMAC_H
+
+/* --------------------------------------------------------------------------
+ * VMAC and VHASH Implementation by Ted Krovetz (tdk@acm.org) and Wei Dai.
+ * This implementation is herby placed in the public domain.
+ * The authors offers no warranty. Use at your own risk.
+ * Please send bug reports to the authors.
+ * Last modified: 17 APR 08, 1700 PDT
+ * ----------------------------------------------------------------------- */
+
+/*
+ * User definable settings.
+ */
+#define VMAC_TAG_LEN 64
+#define VMAC_KEY_SIZE 128/* Must be 128, 192 or 256 */
+#define VMAC_KEY_LEN (VMAC_KEY_SIZE/8)
+#define VMAC_NHBYTES 128/* Must 2^i for any 3 < i < 13 Standard = 128*/
+
+/*
+ * This implementation uses u32 and u64 as names for unsigned 32-
+ * and 64-bit integer types. These are defined in C99 stdint.h. The
+ * following may need adaptation if you are not running a C99 or
+ * Microsoft C environment.
+ */
+struct vmac_ctx {
+ u64 nhkey[(VMAC_NHBYTES/8)+2*(VMAC_TAG_LEN/64-1)];
+ u64 polykey[2*VMAC_TAG_LEN/64];
+ u64 l3key[2*VMAC_TAG_LEN/64];
+ u64 polytmp[2*VMAC_TAG_LEN/64];
+ u64 cached_nonce[2];
+ u64 cached_aes[2];
+ int first_block_processed;
+};
+
+typedef u64 vmac_t;
+
+struct vmac_ctx_t {
+ struct crypto_cipher *child;
+ struct vmac_ctx __vmac_ctx;
+};
+
+#endif /* __CRYPTO_VMAC_H */
{0x1002, 0x4A4F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
{0x1002, 0x4A50, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
{0x1002, 0x4A54, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x4B48, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
{0x1002, 0x4B49, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
{0x1002, 0x4B4A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
{0x1002, 0x4B4B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
{0x1002, 0x940F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R600|RADEON_NEW_MEMMAP}, \
{0x1002, 0x94A0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x94A1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x94A3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x94B1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_NEW_MEMMAP}, \
{0x1002, 0x94B3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x94B4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_NEW_MEMMAP}, \
{0x1002, 0x94B5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x94B9, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x9440, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
{0x1002, 0x9441, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
{0x1002, 0x9442, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x9443, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
{0x1002, 0x9444, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
{0x1002, 0x9446, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
{0x1002, 0x944A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x948F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV730|RADEON_NEW_MEMMAP}, \
{0x1002, 0x9490, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV730|RADEON_NEW_MEMMAP}, \
{0x1002, 0x9491, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV730|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x9495, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV730|RADEON_NEW_MEMMAP}, \
{0x1002, 0x9498, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV730|RADEON_NEW_MEMMAP}, \
{0x1002, 0x949C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV730|RADEON_NEW_MEMMAP}, \
{0x1002, 0x949E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV730|RADEON_NEW_MEMMAP}, \
{0x1002, 0x9552, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV710|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x9553, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV710|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x9555, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV710|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x9557, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV710|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x9580, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV630|RADEON_NEW_MEMMAP}, \
{0x1002, 0x9581, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV630|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x9583, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV630|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x9599, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV635|RADEON_NEW_MEMMAP}, \
{0x1002, 0x959B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV635|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x95C0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x95C2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x95C4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x95C5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \
{0x1002, 0x95C6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \
{0x1002, 0x95C7, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \
{0x1002, 0x95C9, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \
- {0x1002, 0x95C2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
- {0x1002, 0x95C4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x95CC, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \
{0x1002, 0x95CD, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \
{0x1002, 0x95CE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \
{0x1002, 0x9614, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS780|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9615, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS780|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9616, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS780|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9710, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS880|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9711, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS880|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9712, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS880|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9713, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS880|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9714, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS880|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0, 0, 0}
#define r128_PCI_IDS \
#define DRM_RADEON_GEM_WAIT_IDLE 0x24
#define DRM_RADEON_CS 0x26
#define DRM_RADEON_INFO 0x27
+#define DRM_RADEON_GEM_SET_TILING 0x28
+#define DRM_RADEON_GEM_GET_TILING 0x29
+#define DRM_RADEON_GEM_BUSY 0x2a
#define DRM_IOCTL_RADEON_CP_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_CP_INIT, drm_radeon_init_t)
#define DRM_IOCTL_RADEON_CP_START DRM_IO( DRM_COMMAND_BASE + DRM_RADEON_CP_START)
#define DRM_IOCTL_RADEON_GEM_WAIT_IDLE DRM_IOW(DRM_COMMAND_BASE + DRM_RADEON_GEM_WAIT_IDLE, struct drm_radeon_gem_wait_idle)
#define DRM_IOCTL_RADEON_CS DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_CS, struct drm_radeon_cs)
#define DRM_IOCTL_RADEON_INFO DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_INFO, struct drm_radeon_info)
-
+#define DRM_IOCTL_RADEON_SET_TILING DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_SET_TILING, struct drm_radeon_gem_set_tiling)
+#define DRM_IOCTL_RADEON_GET_TILING DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_GET_TILING, struct drm_radeon_gem_get_tiling)
+#define DRM_IOCTL_RADEON_GEM_BUSY DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_BUSY, struct drm_radeon_gem_busy)
typedef struct drm_radeon_init {
enum {
#define RADEON_PARAM_FB_LOCATION 14 /* FB location */
#define RADEON_PARAM_NUM_GB_PIPES 15 /* num GB pipes */
#define RADEON_PARAM_DEVICE_ID 16
+#define RADEON_PARAM_NUM_Z_PIPES 17 /* num Z pipes */
typedef struct drm_radeon_getparam {
int param;
uint32_t flags;
};
+#define RADEON_TILING_MACRO 0x1
+#define RADEON_TILING_MICRO 0x2
+#define RADEON_TILING_SWAP 0x4
+#define RADEON_TILING_SURFACE 0x8 /* this object requires a surface
+ * when mapped - i.e. front buffer */
+
+struct drm_radeon_gem_set_tiling {
+ uint32_t handle;
+ uint32_t tiling_flags;
+ uint32_t pitch;
+};
+
+struct drm_radeon_gem_get_tiling {
+ uint32_t handle;
+ uint32_t tiling_flags;
+ uint32_t pitch;
+};
+
struct drm_radeon_gem_mmap {
uint32_t handle;
uint32_t pad;
struct drm_radeon_gem_busy {
uint32_t handle;
- uint32_t busy;
+ uint32_t domain;
};
struct drm_radeon_gem_pread {
#define RADEON_INFO_DEVICE_ID 0x00
#define RADEON_INFO_NUM_GB_PIPES 0x01
+#define RADEON_INFO_NUM_Z_PIPES 0x02
struct drm_radeon_info {
uint32_t request;
#define TTM_PAGE_FLAG_SWAPPED (1 << 4)
#define TTM_PAGE_FLAG_PERSISTANT_SWAP (1 << 5)
#define TTM_PAGE_FLAG_ZERO_ALLOC (1 << 6)
+#define TTM_PAGE_FLAG_DMA32 (1 << 7)
enum ttm_caching_state {
tt_uncached,
int (*sync_obj_flush) (void *sync_obj, void *sync_arg);
void (*sync_obj_unref) (void **sync_obj);
void *(*sync_obj_ref) (void *sync_obj);
+
+ /* hook to notify driver about a driver move so it
+ * can do tiling things */
+ void (*move_notify)(struct ttm_buffer_object *bo,
+ struct ttm_mem_reg *new_mem);
+ /* notify the driver we are taking a fault on this BO
+ * and have reserved it */
+ void (*fault_reserve_notify)(struct ttm_buffer_object *bo);
};
#define TTM_NUM_MEM_TYPES 8
*/
struct delayed_work wq;
+
+ bool need_dma32;
};
/**
extern int ttm_bo_device_init(struct ttm_bo_device *bdev,
struct ttm_mem_global *mem_glob,
struct ttm_bo_driver *driver,
- uint64_t file_page_offset);
+ uint64_t file_page_offset, bool need_dma32);
+
+/**
+ * ttm_bo_unmap_virtual
+ *
+ * @bo: tear down the virtual mappings for this BO
+ */
+extern void ttm_bo_unmap_virtual(struct ttm_buffer_object *bo);
/**
* ttm_bo_reserve:
#include <linux/kernel.h>
-#define TTM_PFX "[TTM]"
+#define TTM_PFX "[TTM] "
enum ttm_global_types {
TTM_GLOBAL_TTM_MEM = 0,
#include <linux/proportions.h>
#include <linux/kernel.h>
#include <linux/fs.h>
+#include <linux/sched.h>
+#include <linux/writeback.h>
#include <asm/atomic.h>
struct page;
* Bits in backing_dev_info.state
*/
enum bdi_state {
- BDI_pdflush, /* A pdflush thread is working this device */
+ BDI_pending, /* On its way to being activated */
+ BDI_wb_alloc, /* Default embedded wb allocated */
BDI_async_congested, /* The async (write) queue is getting full */
BDI_sync_congested, /* The sync queue is getting full */
+ BDI_registered, /* bdi_register() was done */
BDI_unused, /* Available bits start here */
};
#define BDI_STAT_BATCH (8*(1+ilog2(nr_cpu_ids)))
+struct bdi_writeback {
+ struct list_head list; /* hangs off the bdi */
+
+ struct backing_dev_info *bdi; /* our parent bdi */
+ unsigned int nr;
+
+ unsigned long last_old_flush; /* last old data flush */
+
+ struct task_struct *task; /* writeback task */
+ struct list_head b_dirty; /* dirty inodes */
+ struct list_head b_io; /* parked for writeback */
+ struct list_head b_more_io; /* parked for more writeback */
+};
+
struct backing_dev_info {
+ struct list_head bdi_list;
unsigned long ra_pages; /* max readahead in PAGE_CACHE_SIZE units */
unsigned long state; /* Always use atomic bitops on this */
unsigned int capabilities; /* Device capabilities */
void (*unplug_io_fn)(struct backing_dev_info *, struct page *);
void *unplug_io_data;
+ char *name;
+
struct percpu_counter bdi_stat[NR_BDI_STAT_ITEMS];
struct prop_local_percpu completions;
unsigned int min_ratio;
unsigned int max_ratio, max_prop_frac;
+ struct bdi_writeback wb; /* default writeback info for this bdi */
+ spinlock_t wb_lock; /* protects update side of wb_list */
+ struct list_head wb_list; /* the flusher threads hanging off this bdi */
+ unsigned long wb_mask; /* bitmask of registered tasks */
+ unsigned int wb_cnt; /* number of registered tasks */
+
+ struct list_head work_list;
+
struct device *dev;
#ifdef CONFIG_DEBUG_FS
const char *fmt, ...);
int bdi_register_dev(struct backing_dev_info *bdi, dev_t dev);
void bdi_unregister(struct backing_dev_info *bdi);
+void bdi_start_writeback(struct writeback_control *wbc);
+int bdi_writeback_task(struct bdi_writeback *wb);
+int bdi_has_dirty_io(struct backing_dev_info *bdi);
+
+extern spinlock_t bdi_lock;
+extern struct list_head bdi_list;
+
+static inline int wb_has_dirty_io(struct bdi_writeback *wb)
+{
+ return !list_empty(&wb->b_dirty) ||
+ !list_empty(&wb->b_io) ||
+ !list_empty(&wb->b_more_io);
+}
static inline void __add_bdi_stat(struct backing_dev_info *bdi,
enum bdi_stat_item item, s64 amount)
return bdi->capabilities & BDI_CAP_SWAP_BACKED;
}
+static inline bool bdi_cap_flush_forker(struct backing_dev_info *bdi)
+{
+ return bdi == &default_backing_dev_info;
+}
+
static inline bool mapping_cap_writeback_dirty(struct address_space *mapping)
{
return bdi_cap_writeback_dirty(mapping->backing_dev_info);
return bdi_cap_swap_backed(mapping->backing_dev_info);
}
+static inline int bdi_sched_wait(void *word)
+{
+ schedule();
+ return 0;
+}
+
#endif /* _LINUX_BACKING_DEV_H */
int executable_stack);
extern int bprm_mm_init(struct linux_binprm *bprm);
extern int copy_strings_kernel(int argc,char ** argv,struct linux_binprm *bprm);
+extern int prepare_bprm_creds(struct linux_binprm *bprm);
extern void install_exec_creds(struct linux_binprm *bprm);
extern void do_coredump(long signr, int exit_code, struct pt_regs *regs);
extern int set_binfmt(struct linux_binfmt *new);
const unsigned long *src, int shift, int bits);
extern void __bitmap_shift_left(unsigned long *dst,
const unsigned long *src, int shift, int bits);
-extern void __bitmap_and(unsigned long *dst, const unsigned long *bitmap1,
+extern int __bitmap_and(unsigned long *dst, const unsigned long *bitmap1,
const unsigned long *bitmap2, int bits);
extern void __bitmap_or(unsigned long *dst, const unsigned long *bitmap1,
const unsigned long *bitmap2, int bits);
extern void __bitmap_xor(unsigned long *dst, const unsigned long *bitmap1,
const unsigned long *bitmap2, int bits);
-extern void __bitmap_andnot(unsigned long *dst, const unsigned long *bitmap1,
+extern int __bitmap_andnot(unsigned long *dst, const unsigned long *bitmap1,
const unsigned long *bitmap2, int bits);
extern int __bitmap_intersects(const unsigned long *bitmap1,
const unsigned long *bitmap2, int bits);
}
}
-static inline void bitmap_and(unsigned long *dst, const unsigned long *src1,
+static inline int bitmap_and(unsigned long *dst, const unsigned long *src1,
const unsigned long *src2, int nbits)
{
if (small_const_nbits(nbits))
- *dst = *src1 & *src2;
- else
- __bitmap_and(dst, src1, src2, nbits);
+ return (*dst = *src1 & *src2) != 0;
+ return __bitmap_and(dst, src1, src2, nbits);
}
static inline void bitmap_or(unsigned long *dst, const unsigned long *src1,
__bitmap_xor(dst, src1, src2, nbits);
}
-static inline void bitmap_andnot(unsigned long *dst, const unsigned long *src1,
+static inline int bitmap_andnot(unsigned long *dst, const unsigned long *src1,
const unsigned long *src2, int nbits)
{
if (small_const_nbits(nbits))
- *dst = *src1 & ~(*src2);
- else
- __bitmap_andnot(dst, src1, src2, nbits);
+ return (*dst = *src1 & ~(*src2)) != 0;
+ return __bitmap_andnot(dst, src1, src2, nbits);
}
static inline void bitmap_complement(unsigned long *dst, const unsigned long *src,
extern void blk_queue_physical_block_size(struct request_queue *, unsigned short);
extern void blk_queue_alignment_offset(struct request_queue *q,
unsigned int alignment);
+extern void blk_limits_io_min(struct queue_limits *limits, unsigned int min);
extern void blk_queue_io_min(struct request_queue *q, unsigned int min);
extern void blk_queue_io_opt(struct request_queue *q, unsigned int opt);
extern void blk_set_default_limits(struct queue_limits *lim);
#include <linux/highmem.h>
#include <linux/scatterlist.h>
-/**
- * cb710_sg_miter_stop_writing - stop mapping iteration after writing
- * @miter: sg mapping iter to be stopped
- *
- * Description:
- * Stops mapping iterator @miter. @miter should have been started
- * started using sg_miter_start(). A stopped iteration can be
- * resumed by calling sg_miter_next() on it. This is useful when
- * resources (kmap) need to be released during iteration.
- *
- * This is a convenience wrapper that will be optimized out for arches
- * that don't need flush_kernel_dcache_page().
- *
- * Context:
- * IRQ disabled if the SG_MITER_ATOMIC is set. Don't care otherwise.
- */
-static inline void cb710_sg_miter_stop_writing(struct sg_mapping_iter *miter)
-{
- if (miter->page)
- flush_kernel_dcache_page(miter->page);
- sg_miter_stop(miter);
-}
-
/*
* 32-bit PIO mapping sg iterator
*
* without DMA support).
*
* Best-case reading (transfer from device):
- * sg_miter_start();
+ * sg_miter_start(, SG_MITER_TO_SG);
* cb710_sg_dwiter_write_from_io();
- * cb710_sg_miter_stop_writing();
+ * sg_miter_stop();
*
* Best-case writing (transfer to device):
- * sg_miter_start();
+ * sg_miter_start(, SG_MITER_FROM_SG);
* cb710_sg_dwiter_read_to_io();
* sg_miter_stop();
*/
*/
struct list_head release_list;
- /* pids_mutex protects the fields below */
+ /* pids_mutex protects pids_list and cached pid arrays. */
struct rw_semaphore pids_mutex;
- /* Array of process ids in the cgroup */
- pid_t *tasks_pids;
- /* How many files are using the current tasks_pids array */
- int pids_use_count;
- /* Length of the current tasks_pids array */
- int pids_length;
+
+ /* Linked list of struct cgroup_pids */
+ struct list_head pids_list;
/* For RCU-protected deletion */
struct rcu_head rcu_head;
/* Return true if cgrp is a descendant of the task's cgroup */
int cgroup_is_descendant(const struct cgroup *cgrp, struct task_struct *task);
+/*
+ * When the subsys has to access css and may add permanent refcnt to css,
+ * it should take care of racy conditions with rmdir(). Following set of
+ * functions, is for stop/restart rmdir if necessary.
+ * Because these will call css_get/put, "css" should be alive css.
+ *
+ * cgroup_exclude_rmdir();
+ * ...do some jobs which may access arbitrary empty cgroup
+ * cgroup_release_and_wakeup_rmdir();
+ *
+ * When someone removes a cgroup while cgroup_exclude_rmdir() holds it,
+ * it sleeps and cgroup_release_and_wakeup_rmdir() will wake him up.
+ */
+
+void cgroup_exclude_rmdir(struct cgroup_subsys_state *css);
+void cgroup_release_and_wakeup_rmdir(struct cgroup_subsys_state *css);
+
/*
* Control Group subsystem type.
* See Documentation/cgroups/cgroups.txt for details
#endif
#endif
-
-#ifdef CONFIG_GENERIC_CLOCKEVENTS
-extern ktime_t clockevents_get_next_event(int cpu);
-#else
-static inline ktime_t clockevents_get_next_event(int cpu)
-{
- return (ktime_t) { .tv64 = KTIME_MAX };
-}
-#endif
if (cs->enable)
ret = cs->enable(cs);
- /* save mult_orig on enable */
+ /*
+ * The frequency may have changed while the clocksource
+ * was disabled. If so the code in ->enable() must update
+ * the mult value to reflect the new frequency. Make sure
+ * mult_orig follows this change.
+ */
cs->mult_orig = cs->mult;
return ret;
*/
static inline void clocksource_disable(struct clocksource *cs)
{
+ /*
+ * Save mult_orig in mult so clocksource_enable() can
+ * restore the value regardless if ->enable() updates
+ * the value of mult or not.
+ */
+ cs->mult = cs->mult_orig;
+
if (cs->disable)
cs->disable(cs);
}
unsigned int vc_need_wrap : 1;
unsigned int vc_can_do_color : 1;
unsigned int vc_report_mouse : 2;
- unsigned int vc_kmalloced : 1;
unsigned char vc_utf : 1; /* Unicode UTF-8 encoding */
unsigned char vc_utf_count;
int vc_utf_char;
#ifdef CONFIG_SMP
/* Need to know about CPUs going up/down? */
+#if defined(CONFIG_HOTPLUG_CPU) || !defined(MODULE)
+#define cpu_notifier(fn, pri) { \
+ static struct notifier_block fn##_nb __cpuinitdata = \
+ { .notifier_call = fn, .priority = pri }; \
+ register_cpu_notifier(&fn##_nb); \
+}
+#else /* #if defined(CONFIG_HOTPLUG_CPU) || !defined(MODULE) */
+#define cpu_notifier(fn, pri) do { (void)(fn); } while (0)
+#endif /* #else #if defined(CONFIG_HOTPLUG_CPU) || !defined(MODULE) */
#ifdef CONFIG_HOTPLUG_CPU
extern int register_cpu_notifier(struct notifier_block *nb);
extern void unregister_cpu_notifier(struct notifier_block *nb);
#else /* CONFIG_SMP */
+#define cpu_notifier(fn, pri) do { (void)(fn); } while (0)
+
static inline int register_cpu_notifier(struct notifier_block *nb)
{
return 0;
extern void get_online_cpus(void);
extern void put_online_cpus(void);
-#define hotcpu_notifier(fn, pri) { \
- static struct notifier_block fn##_nb __cpuinitdata = \
- { .notifier_call = fn, .priority = pri }; \
- register_cpu_notifier(&fn##_nb); \
-}
+#define hotcpu_notifier(fn, pri) cpu_notifier(fn, pri)
#define register_hotcpu_notifier(nb) register_cpu_notifier(nb)
#define unregister_hotcpu_notifier(nb) unregister_cpu_notifier(nb)
int cpu_down(unsigned int cpu);
* int cpu_isset(cpu, mask) true iff bit 'cpu' set in mask
* int cpu_test_and_set(cpu, mask) test and set bit 'cpu' in mask
*
- * void cpus_and(dst, src1, src2) dst = src1 & src2 [intersection]
+ * int cpus_and(dst, src1, src2) dst = src1 & src2 [intersection]
* void cpus_or(dst, src1, src2) dst = src1 | src2 [union]
* void cpus_xor(dst, src1, src2) dst = src1 ^ src2
- * void cpus_andnot(dst, src1, src2) dst = src1 & ~src2
+ * int cpus_andnot(dst, src1, src2) dst = src1 & ~src2
* void cpus_complement(dst, src) dst = ~src
*
* int cpus_equal(mask1, mask2) Does mask1 == mask2?
}
#define cpus_and(dst, src1, src2) __cpus_and(&(dst), &(src1), &(src2), NR_CPUS)
-static inline void __cpus_and(cpumask_t *dstp, const cpumask_t *src1p,
+static inline int __cpus_and(cpumask_t *dstp, const cpumask_t *src1p,
const cpumask_t *src2p, int nbits)
{
- bitmap_and(dstp->bits, src1p->bits, src2p->bits, nbits);
+ return bitmap_and(dstp->bits, src1p->bits, src2p->bits, nbits);
}
#define cpus_or(dst, src1, src2) __cpus_or(&(dst), &(src1), &(src2), NR_CPUS)
#define cpus_andnot(dst, src1, src2) \
__cpus_andnot(&(dst), &(src1), &(src2), NR_CPUS)
-static inline void __cpus_andnot(cpumask_t *dstp, const cpumask_t *src1p,
+static inline int __cpus_andnot(cpumask_t *dstp, const cpumask_t *src1p,
const cpumask_t *src2p, int nbits)
{
- bitmap_andnot(dstp->bits, src1p->bits, src2p->bits, nbits);
+ return bitmap_andnot(dstp->bits, src1p->bits, src2p->bits, nbits);
}
#define cpus_complement(dst, src) __cpus_complement(&(dst), &(src), NR_CPUS)
* @src1p: the first input
* @src2p: the second input
*/
-static inline void cpumask_and(struct cpumask *dstp,
+static inline int cpumask_and(struct cpumask *dstp,
const struct cpumask *src1p,
const struct cpumask *src2p)
{
- bitmap_and(cpumask_bits(dstp), cpumask_bits(src1p),
+ return bitmap_and(cpumask_bits(dstp), cpumask_bits(src1p),
cpumask_bits(src2p), nr_cpumask_bits);
}
* @src1p: the first input
* @src2p: the second input
*/
-static inline void cpumask_andnot(struct cpumask *dstp,
+static inline int cpumask_andnot(struct cpumask *dstp,
const struct cpumask *src1p,
const struct cpumask *src2p)
{
- bitmap_andnot(cpumask_bits(dstp), cpumask_bits(src1p),
+ return bitmap_andnot(cpumask_bits(dstp), cpumask_bits(src1p),
cpumask_bits(src2p), nr_cpumask_bits);
}
*/
struct cred {
atomic_t usage;
+#ifdef CONFIG_DEBUG_CREDENTIALS
+ atomic_t subscribers; /* number of processes subscribed */
+ void *put_addr;
+ unsigned magic;
+#define CRED_MAGIC 0x43736564
+#define CRED_MAGIC_DEAD 0x44656144
+#endif
uid_t uid; /* real UID of the task */
gid_t gid; /* real GID of the task */
uid_t suid; /* saved UID of the task */
};
extern void __put_cred(struct cred *);
+extern void exit_creds(struct task_struct *);
extern int copy_creds(struct task_struct *, unsigned long);
+extern struct cred *cred_alloc_blank(void);
extern struct cred *prepare_creds(void);
extern struct cred *prepare_exec_creds(void);
extern struct cred *prepare_usermodehelper_creds(void);
extern int set_create_files_as(struct cred *, struct inode *);
extern void __init cred_init(void);
+/*
+ * check for validity of credentials
+ */
+#ifdef CONFIG_DEBUG_CREDENTIALS
+extern void __invalid_creds(const struct cred *, const char *, unsigned);
+extern void __validate_process_creds(struct task_struct *,
+ const char *, unsigned);
+
+static inline bool creds_are_invalid(const struct cred *cred)
+{
+ if (cred->magic != CRED_MAGIC)
+ return true;
+ if (atomic_read(&cred->usage) < atomic_read(&cred->subscribers))
+ return true;
+#ifdef CONFIG_SECURITY_SELINUX
+ if ((unsigned long) cred->security < PAGE_SIZE)
+ return true;
+ if ((*(u32*)cred->security & 0xffffff00) ==
+ (POISON_FREE << 24 | POISON_FREE << 16 | POISON_FREE << 8))
+ return true;
+#endif
+ return false;
+}
+
+static inline void __validate_creds(const struct cred *cred,
+ const char *file, unsigned line)
+{
+ if (unlikely(creds_are_invalid(cred)))
+ __invalid_creds(cred, file, line);
+}
+
+#define validate_creds(cred) \
+do { \
+ __validate_creds((cred), __FILE__, __LINE__); \
+} while(0)
+
+#define validate_process_creds() \
+do { \
+ __validate_process_creds(current, __FILE__, __LINE__); \
+} while(0)
+
+extern void validate_creds_for_do_exit(struct task_struct *);
+#else
+static inline void validate_creds(const struct cred *cred)
+{
+}
+static inline void validate_creds_for_do_exit(struct task_struct *tsk)
+{
+}
+static inline void validate_process_creds(void)
+{
+}
+#endif
+
/**
* get_new_cred - Get a reference on a new set of credentials
* @cred: The new credentials to reference
*/
static inline const struct cred *get_cred(const struct cred *cred)
{
- return get_new_cred((struct cred *) cred);
+ struct cred *nonconst_cred = (struct cred *) cred;
+ validate_creds(cred);
+ return get_new_cred(nonconst_cred);
}
/**
{
struct cred *cred = (struct cred *) _cred;
- BUG_ON(atomic_read(&(cred)->usage) <= 0);
+ validate_creds(cred);
if (atomic_dec_and_test(&(cred)->usage))
__put_cred(cred);
}
struct crypto_aead;
struct crypto_blkcipher;
struct crypto_hash;
-struct crypto_ahash;
struct crypto_rng;
struct crypto_tfm;
struct crypto_type;
void *__ctx[] CRYPTO_MINALIGN_ATTR;
};
-struct ahash_request {
- struct crypto_async_request base;
-
- unsigned int nbytes;
- struct scatterlist *src;
- u8 *result;
-
- void *__ctx[] CRYPTO_MINALIGN_ATTR;
-};
-
/**
* struct aead_request - AEAD request
* @base: Common attributes for async crypto requests
unsigned int ivsize;
};
-struct ahash_alg {
- int (*init)(struct ahash_request *req);
- int (*reinit)(struct ahash_request *req);
- int (*update)(struct ahash_request *req);
- int (*final)(struct ahash_request *req);
- int (*digest)(struct ahash_request *req);
- int (*setkey)(struct crypto_ahash *tfm, const u8 *key,
- unsigned int keylen);
-
- unsigned int digestsize;
-};
-
struct aead_alg {
int (*setkey)(struct crypto_aead *tfm, const u8 *key,
unsigned int keylen);
#define cra_cipher cra_u.cipher
#define cra_digest cra_u.digest
#define cra_hash cra_u.hash
-#define cra_ahash cra_u.ahash
#define cra_compress cra_u.compress
#define cra_rng cra_u.rng
struct cipher_alg cipher;
struct digest_alg digest;
struct hash_alg hash;
- struct ahash_alg ahash;
struct compress_alg compress;
struct rng_alg rng;
} cra_u;
unsigned int digestsize;
};
-struct ahash_tfm {
- int (*init)(struct ahash_request *req);
- int (*update)(struct ahash_request *req);
- int (*final)(struct ahash_request *req);
- int (*digest)(struct ahash_request *req);
- int (*setkey)(struct crypto_ahash *tfm, const u8 *key,
- unsigned int keylen);
-
- unsigned int digestsize;
- unsigned int reqsize;
-};
-
struct compress_tfm {
int (*cot_compress)(struct crypto_tfm *tfm,
const u8 *src, unsigned int slen,
#define crt_blkcipher crt_u.blkcipher
#define crt_cipher crt_u.cipher
#define crt_hash crt_u.hash
-#define crt_ahash crt_u.ahash
#define crt_compress crt_u.compress
#define crt_rng crt_u.rng
struct blkcipher_tfm blkcipher;
struct cipher_tfm cipher;
struct hash_tfm hash;
- struct ahash_tfm ahash;
struct compress_tfm compress;
struct rng_tfm rng;
} crt_u;
static inline void ablkcipher_request_free(struct ablkcipher_request *req)
{
- kfree(req);
+ kzfree(req);
}
static inline void ablkcipher_request_set_callback(
static inline void aead_request_free(struct aead_request *req)
{
- kfree(req);
+ kzfree(req);
}
static inline void aead_request_set_callback(struct aead_request *req,
#ifndef DECOMPRESS_GENERIC_H
#define DECOMPRESS_GENERIC_H
-/* Minimal chunksize to be read.
- *Bzip2 prefers at least 4096
- *Lzma prefers 0x10000 */
-#define COMPR_IOBUF_SIZE 4096
-
typedef int (*decompress_fn) (unsigned char *inbuf, int len,
int(*fill)(void*, unsigned int),
- int(*writebb)(void*, unsigned int),
- unsigned char *output,
+ int(*flush)(void*, unsigned int),
+ unsigned char *outbuf,
int *posp,
void(*error)(char *x));
/* inbuf - input buffer
*len - len of pre-read data in inbuf
- *fill - function to fill inbuf if empty
- *writebb - function to write out outbug
+ *fill - function to fill inbuf when empty
+ *flush - function to write out outbuf
+ *outbuf - output buffer
*posp - if non-null, input position (number of bytes read) will be
* returned here
*
- *If len != 0, the inbuf is initialized (with as much data), and fill
- *should not be called
- *If len = 0, the inbuf is allocated, but empty. Its size is IOBUF_SIZE
- *fill should be called (repeatedly...) to read data, at most IOBUF_SIZE
+ *If len != 0, inbuf should contain all the necessary input data, and fill
+ *should be NULL
+ *If len = 0, inbuf can be NULL, in which case the decompressor will allocate
+ *the input buffer. If inbuf != NULL it must be at least XXX_IOBUF_SIZE bytes.
+ *fill will be called (repeatedly...) to read data, at most XXX_IOBUF_SIZE
+ *bytes should be read per call. Replace XXX with the appropriate decompressor
+ *name, i.e. LZMA_IOBUF_SIZE.
+ *
+ *If flush = NULL, outbuf must be large enough to buffer all the expected
+ *output. If flush != NULL, the output buffer will be allocated by the
+ *decompressor (outbuf = NULL), and the flush function will be called to
+ *flush the output buffer at the appropriate time (decompressor and stream
+ *dependent).
*/
+
/* Utility routine to detect the decompression method */
decompress_fn decompress_method(const unsigned char *inbuf, int len,
const char **name);
typedef int (*iterate_devices_callout_fn) (struct dm_target *ti,
struct dm_dev *dev,
- sector_t physical_start,
+ sector_t start, sector_t len,
void *data);
typedef int (*dm_iterate_devices_fn) (struct dm_target *ti,
iterate_devices_callout_fn fn,
void *data);
+typedef void (*dm_io_hints_fn) (struct dm_target *ti,
+ struct queue_limits *limits);
+
/*
* Returns:
* 0: The target can handle the next I/O immediately.
* Combine device limits.
*/
int dm_set_device_limits(struct dm_target *ti, struct dm_dev *dev,
- sector_t start, void *data);
+ sector_t start, sector_t len, void *data);
struct dm_dev {
struct block_device *bdev;
dm_merge_fn merge;
dm_busy_fn busy;
dm_iterate_devices_fn iterate_devices;
+ dm_io_hints_fn io_hints;
/* For internal device-mapper use. */
struct list_head list;
(DM_ULOG_REQUEST_MASK & (request_type))
struct dm_ulog_request {
- char uuid[DM_UUID_LEN]; /* Ties a request to a specific mirror log */
+ /*
+ * The local unique identifier (luid) and the universally unique
+ * identifier (uuid) are used to tie a request to a specific
+ * mirror log. A single machine log could probably make due with
+ * just the 'luid', but a cluster-aware log must use the 'uuid' and
+ * the 'luid'. The uuid is what is required for node to node
+ * communication concerning a particular log, but the 'luid' helps
+ * differentiate between logs that are being swapped and have the
+ * same 'uuid'. (Think "live" and "inactive" device-mapper tables.)
+ */
+ uint64_t luid;
+ char uuid[DM_UUID_LEN];
char padding[7]; /* Padding because DM_UUID_LEN = 129 */
int32_t error; /* Used to report back processing errors */
return dev->dma_mask != NULL && *dev->dma_mask != DMA_MASK_NONE;
}
-static inline int is_buffer_dma_capable(u64 mask, dma_addr_t addr, size_t size)
-{
- return addr + size <= mask;
-}
-
#ifdef CONFIG_HAS_DMA
#include <asm/dma-mapping.h>
#else
struct buffer_head * ext3_bread (handle_t *, struct inode *, int, int, int *);
int ext3_get_blocks_handle(handle_t *handle, struct inode *inode,
sector_t iblock, unsigned long maxblocks, struct buffer_head *bh_result,
- int create, int extend_disksize);
+ int create);
extern struct inode *ext3_iget(struct super_block *, unsigned long);
extern int ext3_write_inode (struct inode *, int);
--- /dev/null
+#ifndef _FIPS_H
+#define _FIPS_H
+
+#ifdef CONFIG_CRYPTO_FIPS
+extern int fips_enabled;
+#else
+#define fips_enabled 0
+#endif
+
+#endif
--- /dev/null
+#ifndef _FLEX_ARRAY_H
+#define _FLEX_ARRAY_H
+
+#include <linux/types.h>
+#include <asm/page.h>
+
+#define FLEX_ARRAY_PART_SIZE PAGE_SIZE
+#define FLEX_ARRAY_BASE_SIZE PAGE_SIZE
+
+struct flex_array_part;
+
+/*
+ * This is meant to replace cases where an array-like
+ * structure has gotten too big to fit into kmalloc()
+ * and the developer is getting tempted to use
+ * vmalloc().
+ */
+
+struct flex_array {
+ union {
+ struct {
+ int element_size;
+ int total_nr_elements;
+ struct flex_array_part *parts[];
+ };
+ /*
+ * This little trick makes sure that
+ * sizeof(flex_array) == PAGE_SIZE
+ */
+ char padding[FLEX_ARRAY_BASE_SIZE];
+ };
+};
+
+#define FLEX_ARRAY_INIT(size, total) { { {\
+ .element_size = (size), \
+ .total_nr_elements = (total), \
+} } }
+
+struct flex_array *flex_array_alloc(int element_size, unsigned int total,
+ gfp_t flags);
+int flex_array_prealloc(struct flex_array *fa, unsigned int start,
+ unsigned int end, gfp_t flags);
+void flex_array_free(struct flex_array *fa);
+void flex_array_free_parts(struct flex_array *fa);
+int flex_array_put(struct flex_array *fa, unsigned int element_nr, void *src,
+ gfp_t flags);
+void *flex_array_get(struct flex_array *fa, unsigned int element_nr);
+
+#endif /* _FLEX_ARRAY_H */
struct inode {
struct hlist_node i_hash;
- struct list_head i_list;
+ struct list_head i_list; /* backing dev IO list */
struct list_head i_sb_list;
struct list_head i_dentry;
unsigned long i_ino;
struct xattr_handler **s_xattr;
struct list_head s_inodes; /* all inodes */
- struct list_head s_dirty; /* dirty inodes */
- struct list_head s_io; /* parked for writeback */
- struct list_head s_more_io; /* parked for more writeback */
struct hlist_head s_anon; /* anonymous dentries for (nfs) exporting */
struct list_head s_files;
/* s_dentry_lru and s_nr_dentry_unused are protected by dcache_lock */
void (*put_link) (struct dentry *, struct nameidata *, void *);
void (*truncate) (struct inode *);
int (*permission) (struct inode *, int);
+ int (*check_acl)(struct inode *, int);
int (*setattr) (struct dentry *, struct iattr *);
int (*getattr) (struct vfsmount *mnt, struct dentry *, struct kstat *);
int (*setxattr) (struct dentry *, const char *,const void *,size_t,int);
struct vfsmount *mnt);
extern void simple_set_mnt(struct vfsmount *mnt, struct super_block *sb);
int __put_super_and_need_restart(struct super_block *sb);
+void put_super(struct super_block *sb);
/* Alas, no aliases. Too much hassle with bringing module.h everywhere */
#define fops_get(fops) \
extern int register_blkdev(unsigned int, const char *);
extern void unregister_blkdev(unsigned int, const char *);
extern struct block_device *bdget(dev_t);
+extern struct block_device *bdgrab(struct block_device *bdev);
extern void bd_set_size(struct block_device *, loff_t size);
extern void bd_forget(struct inode *inode);
extern void bdput(struct block_device *);
#define CHRDEV_MAJOR_HASH_SIZE 255
extern int alloc_chrdev_region(dev_t *, unsigned, unsigned, const char *);
extern int register_chrdev_region(dev_t, unsigned, const char *);
-extern int register_chrdev(unsigned int, const char *,
- const struct file_operations *);
-extern void unregister_chrdev(unsigned int, const char *);
+extern int __register_chrdev(unsigned int major, unsigned int baseminor,
+ unsigned int count, const char *name,
+ const struct file_operations *fops);
+extern void __unregister_chrdev(unsigned int major, unsigned int baseminor,
+ unsigned int count, const char *name);
extern void unregister_chrdev_region(dev_t, unsigned);
extern void chrdev_show(struct seq_file *,off_t);
+static inline int register_chrdev(unsigned int major, const char *name,
+ const struct file_operations *fops)
+{
+ return __register_chrdev(major, 0, 256, name, fops);
+}
+
+static inline void unregister_chrdev(unsigned int major, const char *name)
+{
+ __unregister_chrdev(major, 0, 256, name);
+}
+
/* fs/block_dev.c */
#define BDEVNAME_SIZE 32 /* Largest string for a blockdev identifier */
#define BDEVT_SIZE 10 /* Largest string for MAJ:MIN for blkdev */
extern int invalidate_inode_pages2(struct address_space *mapping);
extern int invalidate_inode_pages2_range(struct address_space *mapping,
pgoff_t start, pgoff_t end);
-extern void generic_sync_sb_inodes(struct super_block *sb,
- struct writeback_control *wbc);
extern int write_inode_now(struct inode *, int);
extern int filemap_fdatawrite(struct address_space *);
extern int filemap_flush(struct address_space *);
int open_flag, int mode, int acc_mode);
extern int may_open(struct path *, int, int);
-extern int kernel_read(struct file *, unsigned long, char *, unsigned long);
+extern int kernel_read(struct file *, loff_t, char *, unsigned long);
extern struct file * open_exec(const char *);
/* fs/dcache.c -- generic fs support functions */
extern loff_t vfs_llseek(struct file *file, loff_t offset, int origin);
-extern struct inode * inode_init_always(struct super_block *, struct inode *);
+extern int inode_init_always(struct super_block *, struct inode *);
extern void inode_init_once(struct inode *);
extern void inode_add_to_lists(struct super_block *, struct inode *);
extern void iput(struct inode *);
extern void iget_failed(struct inode *);
extern void clear_inode(struct inode *);
extern void destroy_inode(struct inode *);
+extern void __destroy_inode(struct inode *);
extern struct inode *new_inode(struct super_block *);
extern int should_remove_suid(struct dentry *);
extern int file_remove_suid(struct file *);
extern int set_blocksize(struct block_device *, int);
extern int sb_set_blocksize(struct super_block *, int);
extern int sb_min_blocksize(struct super_block *, int);
-extern int sb_has_dirty_inodes(struct super_block *);
extern int generic_file_mmap(struct file *, struct vm_area_struct *);
extern int generic_file_readonly_mmap(struct file *, struct vm_area_struct *);
/* put here because inotify does some weird stuff when destroying watches */
extern struct fsnotify_event *fsnotify_create_event(struct inode *to_tell, __u32 mask,
void *data, int data_is, const char *name,
- u32 cookie);
+ u32 cookie, gfp_t gfp);
#else
TRACE_TYPE_NO_CONSUME = 3 /* Handled but ask to not consume */
};
-
+void tracing_generic_entry_update(struct trace_entry *entry,
+ unsigned long flags,
+ int pc);
struct ring_buffer_event *
trace_current_buffer_lock_reserve(int type, unsigned long len,
unsigned long flags, int pc);
void *filter;
void *mod;
-#ifdef CONFIG_EVENT_PROFILE
- atomic_t profile_count;
- int (*profile_enable)(struct ftrace_event_call *);
- void (*profile_disable)(struct ftrace_event_call *);
-#endif
+ atomic_t profile_count;
+ int (*profile_enable)(struct ftrace_event_call *);
+ void (*profile_disable)(struct ftrace_event_call *);
};
#define MAX_FILTER_PRED 32
* @packets: number of seen packets
*/
struct gnet_stats_basic
+{
+ __u64 bytes;
+ __u32 packets;
+};
+struct gnet_stats_basic_packed
{
__u64 bytes;
__u32 packets;
}
#endif
-#if defined(CONFIG_NO_HZ) && !defined(CONFIG_CLASSIC_RCU)
+#if defined(CONFIG_NO_HZ)
extern void rcu_irq_enter(void);
extern void rcu_irq_exit(void);
extern void rcu_nmi_enter(void);
# define rcu_irq_exit() do { } while (0)
# define rcu_nmi_enter() do { } while (0)
# define rcu_nmi_exit() do { } while (0)
-#endif /* #if defined(CONFIG_NO_HZ) && !defined(CONFIG_CLASSIC_RCU) */
+#endif /* #if defined(CONFIG_NO_HZ) */
/*
* It is safe to do non-atomic ops on ->hardirq_context,
static inline void timer_stats_account_hrtimer(struct hrtimer *timer)
{
- if (likely(!timer->start_pid))
+ if (likely(!timer->start_site))
return;
timer_stats_update_stats(timer, timer->start_pid, timer->start_site,
timer->function, timer->start_comm, 0);
#include <asm/tlbflush.h>
struct ctl_table;
+struct user_struct;
int PageHuge(struct page *page);
extern const struct file_operations hugetlbfs_file_operations;
extern struct vm_operations_struct hugetlb_vm_ops;
-struct file *hugetlb_file_setup(const char *name, size_t, int);
+struct file *hugetlb_file_setup(const char *name, size_t size, int acct,
+ struct user_struct **user);
int hugetlb_get_quota(struct address_space *mapping, long delta);
void hugetlb_put_quota(struct address_space *mapping, long delta);
#define is_file_hugepages(file) 0
#define set_file_hugepages(file) BUG()
-#define hugetlb_file_setup(name,size,acctflag) ERR_PTR(-ENOSYS)
+#define hugetlb_file_setup(name,size,acct,user) ERR_PTR(-ENOSYS)
#endif /* !CONFIG_HUGETLBFS */
#define IN_DEV_FORWARD(in_dev) IN_DEV_CONF_GET((in_dev), FORWARDING)
#define IN_DEV_MFORWARD(in_dev) IN_DEV_ANDCONF((in_dev), MC_FORWARDING)
-#define IN_DEV_RPFILTER(in_dev) IN_DEV_ANDCONF((in_dev), RP_FILTER)
+#define IN_DEV_RPFILTER(in_dev) IN_DEV_MAXCONF((in_dev), RP_FILTER)
#define IN_DEV_SOURCE_ROUTE(in_dev) IN_DEV_ANDCONF((in_dev), \
ACCEPT_SOURCE_ROUTE)
#define IN_DEV_BOOTP_RELAY(in_dev) IN_DEV_ANDCONF((in_dev), BOOTP_RELAY)
# define CAP_INIT_BSET CAP_INIT_EFF_SET
#endif
+#ifdef CONFIG_TREE_PREEMPT_RCU
+#define INIT_TASK_RCU_PREEMPT(tsk) \
+ .rcu_read_lock_nesting = 0, \
+ .rcu_read_unlock_special = 0, \
+ .rcu_blocked_node = NULL, \
+ .rcu_node_entry = LIST_HEAD_INIT(tsk.rcu_node_entry),
+#else
+#define INIT_TASK_RCU_PREEMPT(tsk)
+#endif
+
extern struct cred init_cred;
#ifdef CONFIG_PERF_COUNTERS
INIT_LOCKDEP \
INIT_FTRACE_GRAPH \
INIT_TRACE_RECURSION \
+ INIT_TASK_RCU_PREEMPT(tsk) \
}
#define KEY_COL(k) (((k) >> 16) & 0xff)
#define KEY_VAL(k) ((k) & 0xffff)
+#define MATRIX_SCAN_CODE(row, col, row_shift) (((row) << (row_shift)) + (col))
+
/**
* struct matrix_keymap_data - keymap for matrix keyboards
* @keymap: pointer to array of uint32 values encoded with KEY() macro
* representing keymap
* @keymap_size: number of entries (initialized) in this keymap
- * @max_keymap_size: maximum size of keymap supported by the device
*
* This structure is supposed to be used by platform code to supply
* keymaps to drivers that implement matrix-like keypads/keyboards.
struct matrix_keymap_data {
const uint32_t *keymap;
unsigned int keymap_size;
- unsigned int max_keymap_size;
};
/**
* struct matrix_keypad_platform_data - platform-dependent keypad data
* @keymap_data: pointer to &matrix_keymap_data
- * @row_gpios: array of gpio numbers reporesenting rows
- * @col_gpios: array of gpio numbers reporesenting colums
+ * @row_gpios: pointer to array of gpio numbers representing rows
+ * @col_gpios: pointer to array of gpio numbers reporesenting colums
* @num_row_gpios: actual number of row gpios used by device
* @num_col_gpios: actual number of col gpios used by device
* @col_scan_delay_us: delay, measured in microseconds, that is
struct matrix_keypad_platform_data {
const struct matrix_keymap_data *keymap_data;
- unsigned int row_gpios[MATRIX_MAX_ROWS];
- unsigned int col_gpios[MATRIX_MAX_COLS];
+ const unsigned int *row_gpios;
+ const unsigned int *col_gpios;
+
unsigned int num_row_gpios;
unsigned int num_col_gpios;
#include <linux/irqflags.h>
#include <linux/smp.h>
#include <linux/percpu.h>
+#include <linux/hrtimer.h>
#include <asm/atomic.h>
#include <asm/ptrace.h>
* IRQF_IRQPOLL - Interrupt is used for polling (only the interrupt that is
* registered first in an shared interrupt is considered for
* performance reasons)
+ * IRQF_ONESHOT - Interrupt is not reenabled after the hardirq handler finished.
+ * Used by threaded interrupts which need to keep the
+ * irq line disabled until the threaded handler has been run.
*/
#define IRQF_DISABLED 0x00000020
#define IRQF_SAMPLE_RANDOM 0x00000040
#define IRQF_PERCPU 0x00000400
#define IRQF_NOBALANCING 0x00000800
#define IRQF_IRQPOLL 0x00001000
+#define IRQF_ONESHOT 0x00002000
/*
* Bits used by threaded handlers:
* IRQTF_RUNTHREAD - signals that the interrupt handler thread should run
* IRQTF_DIED - handler thread died
* IRQTF_WARNED - warning "IRQ_WAKE_THREAD w/o thread_fn" has been printed
+ * IRQTF_AFFINITY - irq thread is requested to adjust affinity
*/
enum {
IRQTF_RUNTHREAD,
IRQTF_DIED,
IRQTF_WARNED,
+ IRQTF_AFFINITY,
};
typedef irqreturn_t (*irq_handler_t)(int, void *);
extern void tasklet_init(struct tasklet_struct *t,
void (*func)(unsigned long), unsigned long data);
+struct tasklet_hrtimer {
+ struct hrtimer timer;
+ struct tasklet_struct tasklet;
+ enum hrtimer_restart (*function)(struct hrtimer *);
+};
+
+extern void
+tasklet_hrtimer_init(struct tasklet_hrtimer *ttimer,
+ enum hrtimer_restart (*function)(struct hrtimer *),
+ clockid_t which_clock, enum hrtimer_mode mode);
+
+static inline
+int tasklet_hrtimer_start(struct tasklet_hrtimer *ttimer, ktime_t time,
+ const enum hrtimer_mode mode)
+{
+ return hrtimer_start(&ttimer->timer, time, mode);
+}
+
+static inline
+void tasklet_hrtimer_cancel(struct tasklet_hrtimer *ttimer)
+{
+ hrtimer_cancel(&ttimer->timer);
+ tasklet_kill(&ttimer->tasklet);
+}
+
/*
* Autoprobing for irqs:
*
* a race).
*/
if (ioc && atomic_long_inc_not_zero(&ioc->refcount)) {
- atomic_long_inc(&ioc->refcount);
+ atomic_inc(&ioc->nr_tasks);
return ioc;
}
#define IRQ_MOVE_PCNTXT 0x01000000 /* IRQ migration from process context */
#define IRQ_AFFINITY_SET 0x02000000 /* IRQ affinity was set from userspace*/
#define IRQ_SUSPENDED 0x04000000 /* IRQ has gone through suspend sequence */
+#define IRQ_ONESHOT 0x08000000 /* IRQ is not unmasked after hardirq */
+#define IRQ_NESTED_THREAD 0x10000000 /* IRQ is nested into another, no own handler thread */
#ifdef CONFIG_IRQ_PER_CPU
# define CHECK_IRQ_PER_CPU(var) ((var) & IRQ_PER_CPU)
* @set_type: set the flow type (IRQ_TYPE_LEVEL/etc.) of an IRQ
* @set_wake: enable/disable power-management wake-on of an IRQ
*
+ * @bus_lock: function to lock access to slow bus (i2c) chips
+ * @bus_sync_unlock: function to sync and unlock slow bus (i2c) chips
+ *
* @release: release function solely used by UML
* @typename: obsoleted by name, kept as migration helper
*/
int (*set_type)(unsigned int irq, unsigned int flow_type);
int (*set_wake)(unsigned int irq, unsigned int on);
+ void (*bus_lock)(unsigned int irq);
+ void (*bus_sync_unlock)(unsigned int irq);
+
/* Currently used only by UML, might disappear one day.*/
#ifdef CONFIG_IRQ_RELEASE_METHOD
void (*release)(unsigned int irq, void *dev_id);
extern struct irq_desc *irq_to_desc_alloc_node(unsigned int irq, int node);
-/*
- * Migration helpers for obsolete names, they will go away:
- */
-#define hw_interrupt_type irq_chip
-#define no_irq_type no_irq_chip
-typedef struct irq_desc irq_desc_t;
-
/*
* Pick up the arch-dependent methods:
*/
extern void handle_simple_irq(unsigned int irq, struct irq_desc *desc);
extern void handle_percpu_irq(unsigned int irq, struct irq_desc *desc);
extern void handle_bad_irq(unsigned int irq, struct irq_desc *desc);
+extern void handle_nested_irq(unsigned int irq);
/*
* Monolithic do_IRQ implementation.
__set_irq_handler(irq, handle, 1, NULL);
}
+extern void set_irq_nested_thread(unsigned int irq, int nest);
+
extern void set_irq_noprobe(unsigned int irq);
extern void set_irq_probe(unsigned int irq);
; \
else
+#ifdef CONFIG_SMP
+#define irq_node(irq) (irq_to_desc(irq)->node)
+#else
+#define irq_node(irq) 0
+#endif
+
#endif /* CONFIG_GENERIC_HARDIRQS */
#define for_each_irq_nr(irq) \
struct rw_semaphore sem; /* change vs change sem */
struct key_user *user; /* owner of this key */
void *security; /* security data for this key */
- time_t expiry; /* time at which key expires (or 0) */
+ union {
+ time_t expiry; /* time at which key expires (or 0) */
+ time_t revoked_at; /* time at which key was revoked */
+ };
uid_t uid;
gid_t gid;
key_perm_t perm; /* access permissions */
extern ctl_table key_sysctls[];
#endif
+extern void key_replace_session_keyring(void);
+
/*
* the userspace interface
*/
#define key_fsuid_changed(t) do { } while(0)
#define key_fsgid_changed(t) do { } while(0)
#define key_init() do { } while(0)
+#define key_replace_session_keyring() do { } while(0)
#endif /* CONFIG_KEYS */
#endif /* __KERNEL__ */
#define KEYCTL_SET_TIMEOUT 15 /* set key timeout */
#define KEYCTL_ASSUME_AUTHORITY 16 /* assume request_key() authorisation */
#define KEYCTL_GET_SECURITY 17 /* get key security label */
+#define KEYCTL_SESSION_TO_PARENT 18 /* apply session keyring to parent process */
#endif /* _LINUX_KEYCTL_H */
int kmemcheck_show_addr(unsigned long address);
int kmemcheck_hide_addr(unsigned long address);
+bool kmemcheck_is_obj_initialized(unsigned long addr, size_t size);
+
#else
#define kmemcheck_enabled 0
{
}
+static inline bool kmemcheck_is_obj_initialized(unsigned long addr, size_t size)
+{
+ return true;
+}
+
#endif /* CONFIG_KMEMCHECK */
/*
#ifdef CONFIG_DEBUG_KMEMLEAK
-extern void kmemleak_init(void);
+extern void kmemleak_init(void) __ref;
extern void kmemleak_alloc(const void *ptr, size_t size, int min_count,
- gfp_t gfp);
-extern void kmemleak_free(const void *ptr);
-extern void kmemleak_free_part(const void *ptr, size_t size);
+ gfp_t gfp) __ref;
+extern void kmemleak_free(const void *ptr) __ref;
+extern void kmemleak_free_part(const void *ptr, size_t size) __ref;
extern void kmemleak_padding(const void *ptr, unsigned long offset,
- size_t size);
-extern void kmemleak_not_leak(const void *ptr);
-extern void kmemleak_ignore(const void *ptr);
+ size_t size) __ref;
+extern void kmemleak_not_leak(const void *ptr) __ref;
+extern void kmemleak_ignore(const void *ptr) __ref;
extern void kmemleak_scan_area(const void *ptr, unsigned long offset,
- size_t length, gfp_t gfp);
-extern void kmemleak_no_scan(const void *ptr);
+ size_t length, gfp_t gfp) __ref;
+extern void kmemleak_no_scan(const void *ptr) __ref;
static inline void kmemleak_alloc_recursive(const void *ptr, size_t size,
int min_count, unsigned long flags,
struct kvm_kernel_irq_routing_entry {
u32 gsi;
+ u32 type;
int (*set)(struct kvm_kernel_irq_routing_entry *e,
struct kvm *kvm, int level);
union {
-/* Things the lguest guest needs to know. Note: like all lguest interfaces,
- * this is subject to wild and random change between versions. */
+/*
+ * Things the lguest guest needs to know. Note: like all lguest interfaces,
+ * this is subject to wild and random change between versions.
+ */
#ifndef _LINUX_LGUEST_H
#define _LINUX_LGUEST_H
#define LG_CLOCK_MIN_DELTA 100UL
#define LG_CLOCK_MAX_DELTA ULONG_MAX
-/*G:032 The second method of communicating with the Host is to via "struct
+/*G:031
+ * The second method of communicating with the Host is to via "struct
* lguest_data". Once the Guest's initialization hypercall tells the Host where
- * this is, the Guest and Host both publish information in it. :*/
-struct lguest_data
-{
- /* 512 == enabled (same as eflags in normal hardware). The Guest
- * changes interrupts so often that a hypercall is too slow. */
+ * this is, the Guest and Host both publish information in it.
+:*/
+struct lguest_data {
+ /*
+ * 512 == enabled (same as eflags in normal hardware). The Guest
+ * changes interrupts so often that a hypercall is too slow.
+ */
unsigned int irq_enabled;
/* Fine-grained interrupt disabling by the Guest */
DECLARE_BITMAP(blocked_interrupts, LGUEST_IRQS);
- /* The Host writes the virtual address of the last page fault here,
+ /*
+ * The Host writes the virtual address of the last page fault here,
* which saves the Guest a hypercall. CR2 is the native register where
- * this address would normally be found. */
+ * this address would normally be found.
+ */
unsigned long cr2;
/* Wallclock time set by the Host. */
struct timespec time;
- /* Interrupt pending set by the Host. The Guest should do a hypercall
- * if it re-enables interrupts and sees this set (to X86_EFLAGS_IF). */
+ /*
+ * Interrupt pending set by the Host. The Guest should do a hypercall
+ * if it re-enables interrupts and sees this set (to X86_EFLAGS_IF).
+ */
int irq_pending;
- /* Async hypercall ring. Instead of directly making hypercalls, we can
+ /*
+ * Async hypercall ring. Instead of directly making hypercalls, we can
* place them in here for processing the next time the Host wants.
- * This batching can be quite efficient. */
+ * This batching can be quite efficient.
+ */
/* 0xFF == done (set by Host), 0 == pending (set by Guest). */
u8 hcall_status[LHCALL_RING_SIZE];
__u8 type;
/* The number of virtqueues (first in config array) */
__u8 num_vq;
- /* The number of bytes of feature bits. Multiply by 2: one for host
- * features and one for Guest acknowledgements. */
+ /*
+ * The number of bytes of feature bits. Multiply by 2: one for host
+ * features and one for Guest acknowledgements.
+ */
__u8 feature_len;
/* The number of bytes of the config array after virtqueues. */
__u8 config_len;
__u8 config[0];
};
-/*D:135 This is how we expect the device configuration field for a virtqueue
- * to be laid out in config space. */
+/*D:135
+ * This is how we expect the device configuration field for a virtqueue
+ * to be laid out in config space.
+ */
struct lguest_vqconfig {
/* The number of entries in the virtio_ring */
__u16 num;
LHREQ_EVENTFD, /* + address, fd. */
};
-/* The alignment to use between consumer and producer parts of vring.
- * x86 pagesize for historical reasons. */
+/*
+ * The alignment to use between consumer and producer parts of vring.
+ * x86 pagesize for historical reasons.
+ */
#define LGUEST_VRING_ALIGN 4096
#endif /* _LINUX_LGUEST_LAUNCHER */
not multiple of 16 bytes */
ATA_HORKAGE_FIRMWARE_WARN = (1 << 12), /* firmware update warning */
ATA_HORKAGE_1_5_GBPS = (1 << 13), /* force 1.5 Gbps */
+ ATA_HORKAGE_NOSETXFER = (1 << 14), /* skip SETXFER, SATA only */
/* DMA mask for user DMA control: User visible values; DO NOT
renumber */
#endif
/* n_sector is CLEAR_BEGIN, read comment above CLEAR_BEGIN */
u64 n_sectors; /* size of device, if ATA */
+ u64 n_native_sectors; /* native size, if ATA */
unsigned int class; /* ATA_DEV_xxx */
unsigned long unpark_deadline;
extern u64 __init __lmb_alloc_base(u64 size,
u64 align, u64 max_addr);
extern u64 __init lmb_phys_mem_size(void);
-extern u64 __init lmb_end_of_DRAM(void);
+extern u64 lmb_end_of_DRAM(void);
extern void __init lmb_enforce_memory_limit(u64 memory_limit);
extern int __init lmb_is_reserved(u64 addr);
extern int lmb_find(struct lmb_property *res);
struct lock_class *class;
struct stack_trace trace;
int distance;
+
+ /*
+ * The parent field is used to implement breadth-first search, and the
+ * bit 0 is reused to indicate if the lock has been accessed in BFS.
+ */
+ struct lock_list *parent;
};
/*
* interrupt context:
*/
unsigned int irq_context:2; /* bit 0 - soft, bit 1 - hard */
- unsigned int trylock:1;
+ unsigned int trylock:1; /* 16 bits */
+
unsigned int read:2; /* see lock_acquire() comment */
unsigned int check:2; /* see lock_acquire() comment */
unsigned int hardirqs_off:1;
+ unsigned int references:11; /* 32 bits */
};
/*
extern void lock_release(struct lockdep_map *lock, int nested,
unsigned long ip);
+#define lockdep_is_held(lock) lock_is_held(&(lock)->dep_map)
+
+extern int lock_is_held(struct lockdep_map *lock);
+
extern void lock_set_class(struct lockdep_map *lock, const char *name,
struct lock_class_key *key, unsigned int subclass,
unsigned long ip);
#define lockdep_depth(tsk) (debug_locks ? (tsk)->lockdep_depth : 0)
+#define lockdep_assert_held(l) WARN_ON(debug_locks && !lockdep_is_held(l))
+
#else /* !LOCKDEP */
static inline void lockdep_off(void)
#define lockdep_depth(tsk) (0)
+#define lockdep_assert_held(l) do { } while (0)
+
#endif /* !LOCKDEP */
#ifdef CONFIG_LOCK_STAT
#define LSM_AUDIT_DATA_IPC 4
#define LSM_AUDIT_DATA_TASK 5
#define LSM_AUDIT_DATA_KEY 6
+#define LSM_AUDIT_NO_AUDIT 7
struct task_struct *tsk;
union {
struct {
} key_struct;
#endif
} u;
- const char *function;
/* this union contains LSM specific data */
union {
+#ifdef CONFIG_SECURITY_SMACK
/* SMACK data */
struct smack_audit_data {
+ const char *function;
char *subject;
char *object;
char *request;
int result;
} smack_audit_data;
+#endif
+#ifdef CONFIG_SECURITY_SELINUX
/* SELinux data */
struct {
u32 ssid;
u16 tclass;
u32 requested;
u32 audited;
+ u32 denied;
struct av_decision *avd;
int result;
} selinux_audit_data;
- } lsm_priv;
+#endif
+ };
/* these callback will be implemented by a specific LSM */
void (*lsm_pre_audit)(struct audit_buffer *, void *);
void (*lsm_post_audit)(struct audit_buffer *, void *);
/* Initialize an LSM audit data structure. */
#define COMMON_AUDIT_DATA_INIT(_d, _t) \
{ memset((_d), 0, sizeof(struct common_audit_data)); \
- (_d)->type = LSM_AUDIT_DATA_##_t; (_d)->function = __func__; }
+ (_d)->type = LSM_AUDIT_DATA_##_t; }
void common_lsm_audit(struct common_audit_data *a);
#define sysctl_legacy_va_layout 0
#endif
-extern unsigned long mmap_min_addr;
-
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/processor.h>
set_page_section(page, pfn_to_section_nr(pfn));
}
-/*
- * If a hint addr is less than mmap_min_addr change hint to be as
- * low as possible but still greater than mmap_min_addr
- */
-static inline unsigned long round_hint_to_min(unsigned long hint)
-{
- hint &= PAGE_MASK;
- if (((void *)hint != NULL) &&
- (hint < mmap_min_addr))
- return PAGE_ALIGN(mmap_min_addr);
- return hint;
-}
-
/*
* Some inline functions in vmstat.h depend on page_zone()
*/
unsigned long saved_auxv[AT_VECTOR_SIZE]; /* for /proc/PID/auxv */
- s8 oom_adj; /* OOM kill score adjustment (bit shift) */
-
cpumask_t cpu_vm_mask;
/* Architecture-specific MM context */
static inline struct mtd_info *dev_to_mtd(struct device *dev)
{
- return dev ? container_of(dev, struct mtd_info, dev) : NULL;
+ return dev ? dev_get_drvdata(dev) : NULL;
}
static inline uint32_t mtd_div_by_eb(uint64_t sz, struct mtd_info *mtd)
#define MTDPART_SIZ_FULL (0)
+struct mtd_info;
+
int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int);
int del_mtd_partitions(struct mtd_info *);
extern int nfs_flush_incompatible(struct file *file, struct page *page);
extern int nfs_updatepage(struct file *, struct page *, unsigned int, unsigned int);
extern int nfs_writeback_done(struct rpc_task *, struct nfs_write_data *);
-extern void nfs_writedata_release(void *);
/*
* Try to write back everything synchronously (but check the
extern int nfs_commit_inode(struct inode *, int);
extern struct nfs_write_data *nfs_commitdata_alloc(void);
extern void nfs_commit_free(struct nfs_write_data *wdata);
-extern void nfs_commitdata_release(void *wdata);
#else
static inline int
nfs_commit_inode(struct inode *inode, int how)
* Allocate nfs_write_data structures
*/
extern struct nfs_write_data *nfs_writedata_alloc(unsigned int npages);
+extern void nfs_writedata_free(struct nfs_write_data *);
/*
* linux/fs/nfs/read.c
extern int nfs_readpages(struct file *, struct address_space *,
struct list_head *, unsigned);
extern int nfs_readpage_result(struct rpc_task *, struct nfs_read_data *);
-extern void nfs_readdata_release(void *data);
extern int nfs_readpage_async(struct nfs_open_context *, struct inode *,
struct page *);
* Allocate nfs_read_data structures
*/
extern struct nfs_read_data *nfs_readdata_alloc(unsigned int npages);
+extern void nfs_readdata_free(struct nfs_read_data *);
/*
* linux/fs/nfs3proc.c
static inline void acpi_nmi_enable(void) { }
#endif
-#ifndef trigger_all_cpu_backtrace
-#define trigger_all_cpu_backtrace() do { } while (0)
+/*
+ * Create trigger_all_cpu_backtrace() out of the arch-provided
+ * base function. Return whether such support was available,
+ * to allow calling code to fall back to some other mechanism:
+ */
+#ifdef arch_trigger_all_cpu_backtrace
+static inline bool trigger_all_cpu_backtrace(void)
+{
+ arch_trigger_all_cpu_backtrace();
+
+ return true;
+}
+#else
+static inline bool trigger_all_cpu_backtrace(void)
+{
+ return false;
+}
#endif
#endif
* to generate slightly worse code. So use a simple one-line #define
* for node_isset(), instead of wrapping an inline inside a macro, the
* way we do the other calls.
+ *
+ * NODEMASK_SCRATCH
+ * When doing above logical AND, OR, XOR, Remap operations the callers tend to
+ * need temporary nodemask_t's on the stack. But if NODES_SHIFT is large,
+ * nodemask_t's consume too much stack space. NODEMASK_SCRATCH is a helper
+ * for such situations. See below and CPUMASK_ALLOC also.
*/
#include <linux/kernel.h>
#define for_each_node(node) for_each_node_state(node, N_POSSIBLE)
#define for_each_online_node(node) for_each_node_state(node, N_ONLINE)
+/*
+ * For nodemask scrach area.(See CPUMASK_ALLOC() in cpumask.h)
+ */
+
+#if NODES_SHIFT > 8 /* nodemask_t > 64 bytes */
+#define NODEMASK_ALLOC(x, m) struct x *m = kmalloc(sizeof(*m), GFP_KERNEL)
+#define NODEMASK_FREE(m) kfree(m)
+#else
+#define NODEMASK_ALLOC(x, m) struct x _m, *m = &_m
+#define NODEMASK_FREE(m)
+#endif
+
+/* A example struture for using NODEMASK_ALLOC, used in mempolicy. */
+struct nodemask_scratch {
+ nodemask_t mask1;
+ nodemask_t mask2;
+};
+
+#define NODEMASK_SCRATCH(x) NODEMASK_ALLOC(nodemask_scratch, x)
+#define NODEMASK_SCRATCH_FREE(x) NODEMASK_FREE(x)
+
+
#endif /* __LINUX_NODEMASK_H */
struct device_node *phy_np,
void (*hndlr)(struct net_device *),
u32 flags, phy_interface_t iface);
+extern struct phy_device *of_phy_connect_fixed_link(struct net_device *dev,
+ void (*hndlr)(struct net_device *),
+ phy_interface_t iface);
#endif /* __LINUX_OF_MDIO_H */
{
VM_BUG_ON(in_interrupt());
-#if !defined(CONFIG_SMP) && defined(CONFIG_CLASSIC_RCU)
+#if !defined(CONFIG_SMP) && defined(CONFIG_TREE_RCU)
# ifdef CONFIG_PREEMPT
VM_BUG_ON(!in_atomic());
# endif
{
VM_BUG_ON(in_interrupt());
-#if !defined(CONFIG_SMP) && defined(CONFIG_CLASSIC_RCU)
+#if !defined(CONFIG_SMP) && defined(CONFIG_TREE_RCU)
# ifdef CONFIG_PREEMPT
VM_BUG_ON(!in_atomic());
# endif
PERF_SAMPLE_TID = 1U << 1,
PERF_SAMPLE_TIME = 1U << 2,
PERF_SAMPLE_ADDR = 1U << 3,
- PERF_SAMPLE_GROUP = 1U << 4,
+ PERF_SAMPLE_READ = 1U << 4,
PERF_SAMPLE_CALLCHAIN = 1U << 5,
PERF_SAMPLE_ID = 1U << 6,
PERF_SAMPLE_CPU = 1U << 7,
PERF_SAMPLE_PERIOD = 1U << 8,
+ PERF_SAMPLE_STREAM_ID = 1U << 9,
+ PERF_SAMPLE_RAW = 1U << 10,
- PERF_SAMPLE_MAX = 1U << 9, /* non-ABI */
+ PERF_SAMPLE_MAX = 1U << 11, /* non-ABI */
};
/*
- * Bits that can be set in attr.read_format to request that
- * reads on the counter should return the indicated quantities,
- * in increasing order of bit value, after the counter value.
+ * The format of the data returned by read() on a perf counter fd,
+ * as specified by attr.read_format:
+ *
+ * struct read_format {
+ * { u64 value;
+ * { u64 time_enabled; } && PERF_FORMAT_ENABLED
+ * { u64 time_running; } && PERF_FORMAT_RUNNING
+ * { u64 id; } && PERF_FORMAT_ID
+ * } && !PERF_FORMAT_GROUP
+ *
+ * { u64 nr;
+ * { u64 time_enabled; } && PERF_FORMAT_ENABLED
+ * { u64 time_running; } && PERF_FORMAT_RUNNING
+ * { u64 value;
+ * { u64 id; } && PERF_FORMAT_ID
+ * } cntr[nr];
+ * } && PERF_FORMAT_GROUP
+ * };
*/
enum perf_counter_read_format {
PERF_FORMAT_TOTAL_TIME_ENABLED = 1U << 0,
PERF_FORMAT_TOTAL_TIME_RUNNING = 1U << 1,
PERF_FORMAT_ID = 1U << 2,
+ PERF_FORMAT_GROUP = 1U << 3,
- PERF_FORMAT_MAX = 1U << 3, /* non-ABI */
+ PERF_FORMAT_MAX = 1U << 4, /* non-ABI */
};
#define PERF_ATTR_SIZE_VER0 64 /* sizeof first published struct */
freq : 1, /* use freq, not period */
inherit_stat : 1, /* per task counts */
enable_on_exec : 1, /* next exec enables */
+ task : 1, /* trace fork/exit */
- __reserved_1 : 51;
+ __reserved_1 : 50;
__u32 wakeup_events; /* wakeup every n events */
__u32 __reserved_2;
/*
* struct {
* struct perf_event_header header;
- * u64 time;
- * u64 id;
- * u64 sample_period;
+ * u32 pid, ppid;
+ * u32 tid, ptid;
* };
*/
- PERF_EVENT_PERIOD = 4,
+ PERF_EVENT_EXIT = 4,
/*
* struct {
* struct perf_event_header header;
* u64 time;
* u64 id;
+ * u64 stream_id;
* };
*/
PERF_EVENT_THROTTLE = 5,
* struct {
* struct perf_event_header header;
* u32 pid, ppid;
+ * u32 tid, ptid;
* };
*/
PERF_EVENT_FORK = 7,
* struct {
* struct perf_event_header header;
* u32 pid, tid;
- * u64 value;
- * { u64 time_enabled; } && PERF_FORMAT_ENABLED
- * { u64 time_running; } && PERF_FORMAT_RUNNING
- * { u64 parent_id; } && PERF_FORMAT_ID
+ *
+ * struct read_format values;
* };
*/
PERF_EVENT_READ = 8,
* { u64 time; } && PERF_SAMPLE_TIME
* { u64 addr; } && PERF_SAMPLE_ADDR
* { u64 id; } && PERF_SAMPLE_ID
+ * { u64 stream_id;} && PERF_SAMPLE_STREAM_ID
* { u32 cpu, res; } && PERF_SAMPLE_CPU
* { u64 period; } && PERF_SAMPLE_PERIOD
*
- * { u64 nr;
- * { u64 id, val; } cnt[nr]; } && PERF_SAMPLE_GROUP
+ * { struct read_format values; } && PERF_SAMPLE_READ
*
* { u64 nr,
* u64 ips[nr]; } && PERF_SAMPLE_CALLCHAIN
+ *
+ * #
+ * # The RAW record below is opaque data wrt the ABI
+ * #
+ * # That is, the ABI doesn't make any promises wrt to
+ * # the stability of its content, it may vary depending
+ * # on event, hardware, kernel version and phase of
+ * # the moon.
+ * #
+ * # In other words, PERF_SAMPLE_RAW contents are not an ABI.
+ * #
+ *
+ * { u32 size;
+ * char data[size];}&& PERF_SAMPLE_RAW
* };
*/
PERF_EVENT_SAMPLE = 9,
__u64 ip[PERF_MAX_STACK_DEPTH];
};
+struct perf_raw_record {
+ u32 size;
+ void *data;
+};
+
struct task_struct;
/**
struct pt_regs *regs;
u64 addr;
u64 period;
+ struct perf_raw_record *raw;
};
extern int perf_counter_overflow(struct perf_counter *counter, int nmi,
struct perf_sample_data *data);
+extern void perf_counter_output(struct perf_counter *counter, int nmi,
+ struct perf_sample_data *data);
/*
* Return 1 for a software counter, 0 for a hardware counter
#ifndef _PPS_H_
#define _PPS_H_
+#include <linux/types.h>
+
#define PPS_VERSION "5.3.6"
#define PPS_MAX_SOURCES 16 /* should be enough... */
+++ /dev/null
-/*
- * Read-Copy Update mechanism for mutual exclusion (classic version)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright IBM Corporation, 2001
- *
- * Author: Dipankar Sarma <dipankar@in.ibm.com>
- *
- * Based on the original work by Paul McKenney <paulmck@us.ibm.com>
- * and inputs from Rusty Russell, Andrea Arcangeli and Andi Kleen.
- * Papers:
- * http://www.rdrop.com/users/paulmck/paper/rclockpdcsproof.pdf
- * http://lse.sourceforge.net/locking/rclock_OLS.2001.05.01c.sc.pdf (OLS2001)
- *
- * For detailed explanation of Read-Copy Update mechanism see -
- * Documentation/RCU
- *
- */
-
-#ifndef __LINUX_RCUCLASSIC_H
-#define __LINUX_RCUCLASSIC_H
-
-#include <linux/cache.h>
-#include <linux/spinlock.h>
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <linux/seqlock.h>
-
-#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
-#define RCU_SECONDS_TILL_STALL_CHECK (10 * HZ) /* for rcp->jiffies_stall */
-#define RCU_SECONDS_TILL_STALL_RECHECK (30 * HZ) /* for rcp->jiffies_stall */
-#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
-
-/* Global control variables for rcupdate callback mechanism. */
-struct rcu_ctrlblk {
- long cur; /* Current batch number. */
- long completed; /* Number of the last completed batch */
- long pending; /* Number of the last pending batch */
-#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
- unsigned long gp_start; /* Time at which GP started in jiffies. */
- unsigned long jiffies_stall;
- /* Time at which to check for CPU stalls. */
-#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
-
- int signaled;
-
- spinlock_t lock ____cacheline_internodealigned_in_smp;
- DECLARE_BITMAP(cpumask, NR_CPUS); /* CPUs that need to switch for */
- /* current batch to proceed. */
-} ____cacheline_internodealigned_in_smp;
-
-/* Is batch a before batch b ? */
-static inline int rcu_batch_before(long a, long b)
-{
- return (a - b) < 0;
-}
-
-/* Is batch a after batch b ? */
-static inline int rcu_batch_after(long a, long b)
-{
- return (a - b) > 0;
-}
-
-/* Per-CPU data for Read-Copy UPdate. */
-struct rcu_data {
- /* 1) quiescent state handling : */
- long quiescbatch; /* Batch # for grace period */
- int passed_quiesc; /* User-mode/idle loop etc. */
- int qs_pending; /* core waits for quiesc state */
-
- /* 2) batch handling */
- /*
- * if nxtlist is not NULL, then:
- * batch:
- * The batch # for the last entry of nxtlist
- * [*nxttail[1], NULL = *nxttail[2]):
- * Entries that batch # <= batch
- * [*nxttail[0], *nxttail[1]):
- * Entries that batch # <= batch - 1
- * [nxtlist, *nxttail[0]):
- * Entries that batch # <= batch - 2
- * The grace period for these entries has completed, and
- * the other grace-period-completed entries may be moved
- * here temporarily in rcu_process_callbacks().
- */
- long batch;
- struct rcu_head *nxtlist;
- struct rcu_head **nxttail[3];
- long qlen; /* # of queued callbacks */
- struct rcu_head *donelist;
- struct rcu_head **donetail;
- long blimit; /* Upper limit on a processed batch */
- int cpu;
- struct rcu_head barrier;
-};
-
-/*
- * Increment the quiescent state counter.
- * The counter is a bit degenerated: We do not need to know
- * how many quiescent states passed, just if there was at least
- * one since the start of the grace period. Thus just a flag.
- */
-extern void rcu_qsctr_inc(int cpu);
-extern void rcu_bh_qsctr_inc(int cpu);
-
-extern int rcu_pending(int cpu);
-extern int rcu_needs_cpu(int cpu);
-
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-extern struct lockdep_map rcu_lock_map;
-# define rcu_read_acquire() \
- lock_acquire(&rcu_lock_map, 0, 0, 2, 1, NULL, _THIS_IP_)
-# define rcu_read_release() lock_release(&rcu_lock_map, 1, _THIS_IP_)
-#else
-# define rcu_read_acquire() do { } while (0)
-# define rcu_read_release() do { } while (0)
-#endif
-
-#define __rcu_read_lock() \
- do { \
- preempt_disable(); \
- __acquire(RCU); \
- rcu_read_acquire(); \
- } while (0)
-#define __rcu_read_unlock() \
- do { \
- rcu_read_release(); \
- __release(RCU); \
- preempt_enable(); \
- } while (0)
-#define __rcu_read_lock_bh() \
- do { \
- local_bh_disable(); \
- __acquire(RCU_BH); \
- rcu_read_acquire(); \
- } while (0)
-#define __rcu_read_unlock_bh() \
- do { \
- rcu_read_release(); \
- __release(RCU_BH); \
- local_bh_enable(); \
- } while (0)
-
-#define __synchronize_sched() synchronize_rcu()
-
-#define call_rcu_sched(head, func) call_rcu(head, func)
-
-extern void __rcu_init(void);
-#define rcu_init_sched() do { } while (0)
-extern void rcu_check_callbacks(int cpu, int user);
-extern void rcu_restart_cpu(int cpu);
-
-extern long rcu_batches_completed(void);
-extern long rcu_batches_completed_bh(void);
-
-#define rcu_enter_nohz() do { } while (0)
-#define rcu_exit_nohz() do { } while (0)
-
-/* A context switch is a grace period for rcuclassic. */
-static inline int rcu_blocking_is_gp(void)
-{
- return num_online_cpus() == 1;
-}
-
-#endif /* __LINUX_RCUCLASSIC_H */
void (*func)(struct rcu_head *head);
};
-/* Internal to kernel, but needed by rcupreempt.h. */
+/* Exported common interfaces */
+extern void synchronize_rcu(void);
+extern void synchronize_rcu_bh(void);
+extern void rcu_barrier(void);
+extern void rcu_barrier_bh(void);
+extern void rcu_barrier_sched(void);
+extern void synchronize_sched_expedited(void);
+extern int sched_expedited_torture_stats(char *page);
+
+/* Internal to kernel */
+extern void rcu_init(void);
+extern void rcu_scheduler_starting(void);
+extern int rcu_needs_cpu(int cpu);
extern int rcu_scheduler_active;
-#if defined(CONFIG_CLASSIC_RCU)
-#include <linux/rcuclassic.h>
-#elif defined(CONFIG_TREE_RCU)
+#if defined(CONFIG_TREE_RCU) || defined(CONFIG_TREE_PREEMPT_RCU)
#include <linux/rcutree.h>
-#elif defined(CONFIG_PREEMPT_RCU)
-#include <linux/rcupreempt.h>
#else
#error "Unknown RCU implementation specified to kernel configuration"
-#endif /* #else #if defined(CONFIG_CLASSIC_RCU) */
+#endif
#define RCU_HEAD_INIT { .next = NULL, .func = NULL }
#define RCU_HEAD(head) struct rcu_head head = RCU_HEAD_INIT
(ptr)->next = NULL; (ptr)->func = NULL; \
} while (0)
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+extern struct lockdep_map rcu_lock_map;
+# define rcu_read_acquire() \
+ lock_acquire(&rcu_lock_map, 0, 0, 2, 1, NULL, _THIS_IP_)
+# define rcu_read_release() lock_release(&rcu_lock_map, 1, _THIS_IP_)
+#else
+# define rcu_read_acquire() do { } while (0)
+# define rcu_read_release() do { } while (0)
+#endif
+
/**
* rcu_read_lock - mark the beginning of an RCU read-side critical section.
*
*
* It is illegal to block while in an RCU read-side critical section.
*/
-#define rcu_read_lock() __rcu_read_lock()
+static inline void rcu_read_lock(void)
+{
+ __rcu_read_lock();
+ __acquire(RCU);
+ rcu_read_acquire();
+}
/**
* rcu_read_unlock - marks the end of an RCU read-side critical section.
* used as well. RCU does not care how the writers keep out of each
* others' way, as long as they do so.
*/
-#define rcu_read_unlock() __rcu_read_unlock()
+static inline void rcu_read_unlock(void)
+{
+ rcu_read_release();
+ __release(RCU);
+ __rcu_read_unlock();
+}
/**
* rcu_read_lock_bh - mark the beginning of a softirq-only RCU critical section
* can use just rcu_read_lock().
*
*/
-#define rcu_read_lock_bh() __rcu_read_lock_bh()
+static inline void rcu_read_lock_bh(void)
+{
+ __rcu_read_lock_bh();
+ __acquire(RCU_BH);
+ rcu_read_acquire();
+}
/*
* rcu_read_unlock_bh - marks the end of a softirq-only RCU critical section
*
* See rcu_read_lock_bh() for more information.
*/
-#define rcu_read_unlock_bh() __rcu_read_unlock_bh()
+static inline void rcu_read_unlock_bh(void)
+{
+ rcu_read_release();
+ __release(RCU_BH);
+ __rcu_read_unlock_bh();
+}
/**
* rcu_read_lock_sched - mark the beginning of a RCU-classic critical section
* - call_rcu_sched() and rcu_barrier_sched()
* on the write-side to insure proper synchronization.
*/
-#define rcu_read_lock_sched() preempt_disable()
-#define rcu_read_lock_sched_notrace() preempt_disable_notrace()
+static inline void rcu_read_lock_sched(void)
+{
+ preempt_disable();
+ __acquire(RCU_SCHED);
+ rcu_read_acquire();
+}
+static inline notrace void rcu_read_lock_sched_notrace(void)
+{
+ preempt_disable_notrace();
+ __acquire(RCU_SCHED);
+}
/*
* rcu_read_unlock_sched - marks the end of a RCU-classic critical section
*
* See rcu_read_lock_sched for more information.
*/
-#define rcu_read_unlock_sched() preempt_enable()
-#define rcu_read_unlock_sched_notrace() preempt_enable_notrace()
-
+static inline void rcu_read_unlock_sched(void)
+{
+ rcu_read_release();
+ __release(RCU_SCHED);
+ preempt_enable();
+}
+static inline notrace void rcu_read_unlock_sched_notrace(void)
+{
+ __release(RCU_SCHED);
+ preempt_enable_notrace();
+}
/**
extern void call_rcu_bh(struct rcu_head *head,
void (*func)(struct rcu_head *head));
-/* Exported common interfaces */
-extern void synchronize_rcu(void);
-extern void rcu_barrier(void);
-extern void rcu_barrier_bh(void);
-extern void rcu_barrier_sched(void);
-
-/* Internal to kernel */
-extern void rcu_init(void);
-extern void rcu_scheduler_starting(void);
-extern int rcu_needs_cpu(int cpu);
-
#endif /* __LINUX_RCUPDATE_H */
+++ /dev/null
-/*
- * Read-Copy Update mechanism for mutual exclusion (RT implementation)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) IBM Corporation, 2006
- *
- * Author: Paul McKenney <paulmck@us.ibm.com>
- *
- * Based on the original work by Paul McKenney <paul.mckenney@us.ibm.com>
- * and inputs from Rusty Russell, Andrea Arcangeli and Andi Kleen.
- * Papers:
- * http://www.rdrop.com/users/paulmck/paper/rclockpdcsproof.pdf
- * http://lse.sourceforge.net/locking/rclock_OLS.2001.05.01c.sc.pdf (OLS2001)
- *
- * For detailed explanation of Read-Copy Update mechanism see -
- * Documentation/RCU
- *
- */
-
-#ifndef __LINUX_RCUPREEMPT_H
-#define __LINUX_RCUPREEMPT_H
-
-#include <linux/cache.h>
-#include <linux/spinlock.h>
-#include <linux/threads.h>
-#include <linux/smp.h>
-#include <linux/cpumask.h>
-#include <linux/seqlock.h>
-
-extern void rcu_qsctr_inc(int cpu);
-static inline void rcu_bh_qsctr_inc(int cpu) { }
-
-/*
- * Someone might want to pass call_rcu_bh as a function pointer.
- * So this needs to just be a rename and not a macro function.
- * (no parentheses)
- */
-#define call_rcu_bh call_rcu
-
-/**
- * call_rcu_sched - Queue RCU callback for invocation after sched grace period.
- * @head: structure to be used for queueing the RCU updates.
- * @func: actual update function to be invoked after the grace period
- *
- * The update function will be invoked some time after a full
- * synchronize_sched()-style grace period elapses, in other words after
- * all currently executing preempt-disabled sections of code (including
- * hardirq handlers, NMI handlers, and local_irq_save() blocks) have
- * completed.
- */
-extern void call_rcu_sched(struct rcu_head *head,
- void (*func)(struct rcu_head *head));
-
-extern void __rcu_read_lock(void) __acquires(RCU);
-extern void __rcu_read_unlock(void) __releases(RCU);
-extern int rcu_pending(int cpu);
-extern int rcu_needs_cpu(int cpu);
-
-#define __rcu_read_lock_bh() { rcu_read_lock(); local_bh_disable(); }
-#define __rcu_read_unlock_bh() { local_bh_enable(); rcu_read_unlock(); }
-
-extern void __synchronize_sched(void);
-
-extern void __rcu_init(void);
-extern void rcu_init_sched(void);
-extern void rcu_check_callbacks(int cpu, int user);
-extern void rcu_restart_cpu(int cpu);
-extern long rcu_batches_completed(void);
-
-/*
- * Return the number of RCU batches processed thus far. Useful for debug
- * and statistic. The _bh variant is identifcal to straight RCU
- */
-static inline long rcu_batches_completed_bh(void)
-{
- return rcu_batches_completed();
-}
-
-#ifdef CONFIG_RCU_TRACE
-struct rcupreempt_trace;
-extern long *rcupreempt_flipctr(int cpu);
-extern long rcupreempt_data_completed(void);
-extern int rcupreempt_flip_flag(int cpu);
-extern int rcupreempt_mb_flag(int cpu);
-extern char *rcupreempt_try_flip_state_name(void);
-extern struct rcupreempt_trace *rcupreempt_trace_cpu(int cpu);
-#endif
-
-struct softirq_action;
-
-#ifdef CONFIG_NO_HZ
-extern void rcu_enter_nohz(void);
-extern void rcu_exit_nohz(void);
-#else
-# define rcu_enter_nohz() do { } while (0)
-# define rcu_exit_nohz() do { } while (0)
-#endif
-
-/*
- * A context switch is a grace period for rcupreempt synchronize_rcu()
- * only during early boot, before the scheduler has been initialized.
- * So, how the heck do we get a context switch? Well, if the caller
- * invokes synchronize_rcu(), they are willing to accept a context
- * switch, so we simply pretend that one happened.
- *
- * After boot, there might be a blocked or preempted task in an RCU
- * read-side critical section, so we cannot then take the fastpath.
- */
-static inline int rcu_blocking_is_gp(void)
-{
- return num_online_cpus() == 1 && !rcu_scheduler_active;
-}
-
-#endif /* __LINUX_RCUPREEMPT_H */
+++ /dev/null
-/*
- * Read-Copy Update mechanism for mutual exclusion (RT implementation)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) IBM Corporation, 2006
- *
- * Author: Paul McKenney <paulmck@us.ibm.com>
- *
- * Based on the original work by Paul McKenney <paul.mckenney@us.ibm.com>
- * and inputs from Rusty Russell, Andrea Arcangeli and Andi Kleen.
- * Papers:
- * http://www.rdrop.com/users/paulmck/paper/rclockpdcsproof.pdf
- * http://lse.sourceforge.net/locking/rclock_OLS.2001.05.01c.sc.pdf (OLS2001)
- *
- * For detailed explanation of the Preemptible Read-Copy Update mechanism see -
- * http://lwn.net/Articles/253651/
- */
-
-#ifndef __LINUX_RCUPREEMPT_TRACE_H
-#define __LINUX_RCUPREEMPT_TRACE_H
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-
-#include <asm/atomic.h>
-
-/*
- * PREEMPT_RCU data structures.
- */
-
-struct rcupreempt_trace {
- long next_length;
- long next_add;
- long wait_length;
- long wait_add;
- long done_length;
- long done_add;
- long done_remove;
- atomic_t done_invoked;
- long rcu_check_callbacks;
- atomic_t rcu_try_flip_1;
- atomic_t rcu_try_flip_e1;
- long rcu_try_flip_i1;
- long rcu_try_flip_ie1;
- long rcu_try_flip_g1;
- long rcu_try_flip_a1;
- long rcu_try_flip_ae1;
- long rcu_try_flip_a2;
- long rcu_try_flip_z1;
- long rcu_try_flip_ze1;
- long rcu_try_flip_z2;
- long rcu_try_flip_m1;
- long rcu_try_flip_me1;
- long rcu_try_flip_m2;
-};
-
-#ifdef CONFIG_RCU_TRACE
-#define RCU_TRACE(fn, arg) fn(arg);
-#else
-#define RCU_TRACE(fn, arg)
-#endif
-
-extern void rcupreempt_trace_move2done(struct rcupreempt_trace *trace);
-extern void rcupreempt_trace_move2wait(struct rcupreempt_trace *trace);
-extern void rcupreempt_trace_try_flip_1(struct rcupreempt_trace *trace);
-extern void rcupreempt_trace_try_flip_e1(struct rcupreempt_trace *trace);
-extern void rcupreempt_trace_try_flip_i1(struct rcupreempt_trace *trace);
-extern void rcupreempt_trace_try_flip_ie1(struct rcupreempt_trace *trace);
-extern void rcupreempt_trace_try_flip_g1(struct rcupreempt_trace *trace);
-extern void rcupreempt_trace_try_flip_a1(struct rcupreempt_trace *trace);
-extern void rcupreempt_trace_try_flip_ae1(struct rcupreempt_trace *trace);
-extern void rcupreempt_trace_try_flip_a2(struct rcupreempt_trace *trace);
-extern void rcupreempt_trace_try_flip_z1(struct rcupreempt_trace *trace);
-extern void rcupreempt_trace_try_flip_ze1(struct rcupreempt_trace *trace);
-extern void rcupreempt_trace_try_flip_z2(struct rcupreempt_trace *trace);
-extern void rcupreempt_trace_try_flip_m1(struct rcupreempt_trace *trace);
-extern void rcupreempt_trace_try_flip_me1(struct rcupreempt_trace *trace);
-extern void rcupreempt_trace_try_flip_m2(struct rcupreempt_trace *trace);
-extern void rcupreempt_trace_check_callbacks(struct rcupreempt_trace *trace);
-extern void rcupreempt_trace_done_remove(struct rcupreempt_trace *trace);
-extern void rcupreempt_trace_invoke(struct rcupreempt_trace *trace);
-extern void rcupreempt_trace_next_add(struct rcupreempt_trace *trace);
-
-#endif /* __LINUX_RCUPREEMPT_TRACE_H */
#ifndef __LINUX_RCUTREE_H
#define __LINUX_RCUTREE_H
-#include <linux/cache.h>
-#include <linux/spinlock.h>
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <linux/seqlock.h>
+extern void rcu_sched_qs(int cpu);
+extern void rcu_bh_qs(int cpu);
-/*
- * Define shape of hierarchy based on NR_CPUS and CONFIG_RCU_FANOUT.
- * In theory, it should be possible to add more levels straightforwardly.
- * In practice, this has not been tested, so there is probably some
- * bug somewhere.
- */
-#define MAX_RCU_LVLS 3
-#define RCU_FANOUT (CONFIG_RCU_FANOUT)
-#define RCU_FANOUT_SQ (RCU_FANOUT * RCU_FANOUT)
-#define RCU_FANOUT_CUBE (RCU_FANOUT_SQ * RCU_FANOUT)
-
-#if NR_CPUS <= RCU_FANOUT
-# define NUM_RCU_LVLS 1
-# define NUM_RCU_LVL_0 1
-# define NUM_RCU_LVL_1 (NR_CPUS)
-# define NUM_RCU_LVL_2 0
-# define NUM_RCU_LVL_3 0
-#elif NR_CPUS <= RCU_FANOUT_SQ
-# define NUM_RCU_LVLS 2
-# define NUM_RCU_LVL_0 1
-# define NUM_RCU_LVL_1 (((NR_CPUS) + RCU_FANOUT - 1) / RCU_FANOUT)
-# define NUM_RCU_LVL_2 (NR_CPUS)
-# define NUM_RCU_LVL_3 0
-#elif NR_CPUS <= RCU_FANOUT_CUBE
-# define NUM_RCU_LVLS 3
-# define NUM_RCU_LVL_0 1
-# define NUM_RCU_LVL_1 (((NR_CPUS) + RCU_FANOUT_SQ - 1) / RCU_FANOUT_SQ)
-# define NUM_RCU_LVL_2 (((NR_CPUS) + (RCU_FANOUT) - 1) / (RCU_FANOUT))
-# define NUM_RCU_LVL_3 NR_CPUS
-#else
-# error "CONFIG_RCU_FANOUT insufficient for NR_CPUS"
-#endif /* #if (NR_CPUS) <= RCU_FANOUT */
-
-#define RCU_SUM (NUM_RCU_LVL_0 + NUM_RCU_LVL_1 + NUM_RCU_LVL_2 + NUM_RCU_LVL_3)
-#define NUM_RCU_NODES (RCU_SUM - NR_CPUS)
-
-/*
- * Dynticks per-CPU state.
- */
-struct rcu_dynticks {
- int dynticks_nesting; /* Track nesting level, sort of. */
- int dynticks; /* Even value for dynticks-idle, else odd. */
- int dynticks_nmi; /* Even value for either dynticks-idle or */
- /* not in nmi handler, else odd. So this */
- /* remains even for nmi from irq handler. */
-};
-
-/*
- * Definition for node within the RCU grace-period-detection hierarchy.
- */
-struct rcu_node {
- spinlock_t lock;
- unsigned long qsmask; /* CPUs or groups that need to switch in */
- /* order for current grace period to proceed.*/
- unsigned long qsmaskinit;
- /* Per-GP initialization for qsmask. */
- unsigned long grpmask; /* Mask to apply to parent qsmask. */
- int grplo; /* lowest-numbered CPU or group here. */
- int grphi; /* highest-numbered CPU or group here. */
- u8 grpnum; /* CPU/group number for next level up. */
- u8 level; /* root is at level 0. */
- struct rcu_node *parent;
-} ____cacheline_internodealigned_in_smp;
-
-/* Index values for nxttail array in struct rcu_data. */
-#define RCU_DONE_TAIL 0 /* Also RCU_WAIT head. */
-#define RCU_WAIT_TAIL 1 /* Also RCU_NEXT_READY head. */
-#define RCU_NEXT_READY_TAIL 2 /* Also RCU_NEXT head. */
-#define RCU_NEXT_TAIL 3
-#define RCU_NEXT_SIZE 4
-
-/* Per-CPU data for read-copy update. */
-struct rcu_data {
- /* 1) quiescent-state and grace-period handling : */
- long completed; /* Track rsp->completed gp number */
- /* in order to detect GP end. */
- long gpnum; /* Highest gp number that this CPU */
- /* is aware of having started. */
- long passed_quiesc_completed;
- /* Value of completed at time of qs. */
- bool passed_quiesc; /* User-mode/idle loop etc. */
- bool qs_pending; /* Core waits for quiesc state. */
- bool beenonline; /* CPU online at least once. */
- struct rcu_node *mynode; /* This CPU's leaf of hierarchy */
- unsigned long grpmask; /* Mask to apply to leaf qsmask. */
-
- /* 2) batch handling */
- /*
- * If nxtlist is not NULL, it is partitioned as follows.
- * Any of the partitions might be empty, in which case the
- * pointer to that partition will be equal to the pointer for
- * the following partition. When the list is empty, all of
- * the nxttail elements point to nxtlist, which is NULL.
- *
- * [*nxttail[RCU_NEXT_READY_TAIL], NULL = *nxttail[RCU_NEXT_TAIL]):
- * Entries that might have arrived after current GP ended
- * [*nxttail[RCU_WAIT_TAIL], *nxttail[RCU_NEXT_READY_TAIL]):
- * Entries known to have arrived before current GP ended
- * [*nxttail[RCU_DONE_TAIL], *nxttail[RCU_WAIT_TAIL]):
- * Entries that batch # <= ->completed - 1: waiting for current GP
- * [nxtlist, *nxttail[RCU_DONE_TAIL]):
- * Entries that batch # <= ->completed
- * The grace period for these entries has completed, and
- * the other grace-period-completed entries may be moved
- * here temporarily in rcu_process_callbacks().
- */
- struct rcu_head *nxtlist;
- struct rcu_head **nxttail[RCU_NEXT_SIZE];
- long qlen; /* # of queued callbacks */
- long blimit; /* Upper limit on a processed batch */
-
-#ifdef CONFIG_NO_HZ
- /* 3) dynticks interface. */
- struct rcu_dynticks *dynticks; /* Shared per-CPU dynticks state. */
- int dynticks_snap; /* Per-GP tracking for dynticks. */
- int dynticks_nmi_snap; /* Per-GP tracking for dynticks_nmi. */
-#endif /* #ifdef CONFIG_NO_HZ */
-
- /* 4) reasons this CPU needed to be kicked by force_quiescent_state */
-#ifdef CONFIG_NO_HZ
- unsigned long dynticks_fqs; /* Kicked due to dynticks idle. */
-#endif /* #ifdef CONFIG_NO_HZ */
- unsigned long offline_fqs; /* Kicked due to being offline. */
- unsigned long resched_ipi; /* Sent a resched IPI. */
-
- /* 5) __rcu_pending() statistics. */
- long n_rcu_pending; /* rcu_pending() calls since boot. */
- long n_rp_qs_pending;
- long n_rp_cb_ready;
- long n_rp_cpu_needs_gp;
- long n_rp_gp_completed;
- long n_rp_gp_started;
- long n_rp_need_fqs;
- long n_rp_need_nothing;
-
- int cpu;
-};
-
-/* Values for signaled field in struct rcu_state. */
-#define RCU_GP_INIT 0 /* Grace period being initialized. */
-#define RCU_SAVE_DYNTICK 1 /* Need to scan dyntick state. */
-#define RCU_FORCE_QS 2 /* Need to force quiescent state. */
-#ifdef CONFIG_NO_HZ
-#define RCU_SIGNAL_INIT RCU_SAVE_DYNTICK
-#else /* #ifdef CONFIG_NO_HZ */
-#define RCU_SIGNAL_INIT RCU_FORCE_QS
-#endif /* #else #ifdef CONFIG_NO_HZ */
-
-#define RCU_JIFFIES_TILL_FORCE_QS 3 /* for rsp->jiffies_force_qs */
-#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
-#define RCU_SECONDS_TILL_STALL_CHECK (10 * HZ) /* for rsp->jiffies_stall */
-#define RCU_SECONDS_TILL_STALL_RECHECK (30 * HZ) /* for rsp->jiffies_stall */
-#define RCU_STALL_RAT_DELAY 2 /* Allow other CPUs time */
- /* to take at least one */
- /* scheduling clock irq */
- /* before ratting on them. */
-
-#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
-
-/*
- * RCU global state, including node hierarchy. This hierarchy is
- * represented in "heap" form in a dense array. The root (first level)
- * of the hierarchy is in ->node[0] (referenced by ->level[0]), the second
- * level in ->node[1] through ->node[m] (->node[1] referenced by ->level[1]),
- * and the third level in ->node[m+1] and following (->node[m+1] referenced
- * by ->level[2]). The number of levels is determined by the number of
- * CPUs and by CONFIG_RCU_FANOUT. Small systems will have a "hierarchy"
- * consisting of a single rcu_node.
- */
-struct rcu_state {
- struct rcu_node node[NUM_RCU_NODES]; /* Hierarchy. */
- struct rcu_node *level[NUM_RCU_LVLS]; /* Hierarchy levels. */
- u32 levelcnt[MAX_RCU_LVLS + 1]; /* # nodes in each level. */
- u8 levelspread[NUM_RCU_LVLS]; /* kids/node in each level. */
- struct rcu_data *rda[NR_CPUS]; /* array of rdp pointers. */
-
- /* The following fields are guarded by the root rcu_node's lock. */
-
- u8 signaled ____cacheline_internodealigned_in_smp;
- /* Force QS state. */
- long gpnum; /* Current gp number. */
- long completed; /* # of last completed gp. */
- spinlock_t onofflock; /* exclude on/offline and */
- /* starting new GP. */
- spinlock_t fqslock; /* Only one task forcing */
- /* quiescent states. */
- unsigned long jiffies_force_qs; /* Time at which to invoke */
- /* force_quiescent_state(). */
- unsigned long n_force_qs; /* Number of calls to */
- /* force_quiescent_state(). */
- unsigned long n_force_qs_lh; /* ~Number of calls leaving */
- /* due to lock unavailable. */
- unsigned long n_force_qs_ngp; /* Number of calls leaving */
- /* due to no GP active. */
-#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
- unsigned long gp_start; /* Time at which GP started, */
- /* but in jiffies. */
- unsigned long jiffies_stall; /* Time at which to check */
- /* for CPU stalls. */
-#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
-#ifdef CONFIG_NO_HZ
- long dynticks_completed; /* Value of completed @ snap. */
-#endif /* #ifdef CONFIG_NO_HZ */
-};
+extern int rcu_needs_cpu(int cpu);
-extern void rcu_qsctr_inc(int cpu);
-extern void rcu_bh_qsctr_inc(int cpu);
+#ifdef CONFIG_TREE_PREEMPT_RCU
-extern int rcu_pending(int cpu);
-extern int rcu_needs_cpu(int cpu);
+extern void __rcu_read_lock(void);
+extern void __rcu_read_unlock(void);
+extern void exit_rcu(void);
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-extern struct lockdep_map rcu_lock_map;
-# define rcu_read_acquire() \
- lock_acquire(&rcu_lock_map, 0, 0, 2, 1, NULL, _THIS_IP_)
-# define rcu_read_release() lock_release(&rcu_lock_map, 1, _THIS_IP_)
-#else
-# define rcu_read_acquire() do { } while (0)
-# define rcu_read_release() do { } while (0)
-#endif
+#else /* #ifdef CONFIG_TREE_PREEMPT_RCU */
static inline void __rcu_read_lock(void)
{
preempt_disable();
- __acquire(RCU);
- rcu_read_acquire();
}
+
static inline void __rcu_read_unlock(void)
{
- rcu_read_release();
- __release(RCU);
preempt_enable();
}
+
+static inline void exit_rcu(void)
+{
+}
+
+#endif /* #else #ifdef CONFIG_TREE_PREEMPT_RCU */
+
static inline void __rcu_read_lock_bh(void)
{
local_bh_disable();
- __acquire(RCU_BH);
- rcu_read_acquire();
}
static inline void __rcu_read_unlock_bh(void)
{
- rcu_read_release();
- __release(RCU_BH);
local_bh_enable();
}
#define __synchronize_sched() synchronize_rcu()
-#define call_rcu_sched(head, func) call_rcu(head, func)
+extern void call_rcu_sched(struct rcu_head *head,
+ void (*func)(struct rcu_head *rcu));
-static inline void rcu_init_sched(void)
+static inline void synchronize_rcu_expedited(void)
{
+ synchronize_sched_expedited();
+}
+
+static inline void synchronize_rcu_bh_expedited(void)
+{
+ synchronize_sched_expedited();
}
extern void __rcu_init(void);
extern long rcu_batches_completed(void);
extern long rcu_batches_completed_bh(void);
+extern long rcu_batches_completed_sched(void);
+
+static inline void rcu_init_sched(void)
+{
+}
#ifdef CONFIG_NO_HZ
void rcu_enter_nohz(void);
* should be blocked) so that drivers need not keep track of the soft
* block state -- which they might not be able to.
*/
-bool __must_check rfkill_set_hw_state(struct rfkill *rfkill, bool blocked);
+bool rfkill_set_hw_state(struct rfkill *rfkill, bool blocked);
/**
* rfkill_set_sw_state - Set the internal rfkill software block state
*/
#define SG_MITER_ATOMIC (1 << 0) /* use kmap_atomic */
+#define SG_MITER_TO_SG (1 << 1) /* flush back to phys on unmap */
+#define SG_MITER_FROM_SG (1 << 2) /* nop */
struct sg_mapping_iter {
/* the following three fields can be accessed directly */
((task->state & (__TASK_STOPPED | __TASK_TRACED)) != 0)
#define task_contributes_to_load(task) \
((task->state & TASK_UNINTERRUPTIBLE) != 0 && \
- (task->flags & PF_FROZEN) == 0)
+ (task->flags & PF_FREEZING) == 0)
#define __set_task_state(tsk, state_value) \
do { (tsk)->state = (state_value); } while (0)
#endif
};
+struct rcu_node;
+
struct task_struct {
volatile long state; /* -1 unrunnable, 0 runnable, >0 stopped */
void *stack;
* a short time
*/
unsigned char fpu_counter;
+ s8 oomkilladj; /* OOM kill score adjustment (bit shift). */
#ifdef CONFIG_BLK_DEV_IO_TRACE
unsigned int btrace_seq;
#endif
unsigned int policy;
cpumask_t cpus_allowed;
-#ifdef CONFIG_PREEMPT_RCU
+#ifdef CONFIG_TREE_PREEMPT_RCU
int rcu_read_lock_nesting;
- int rcu_flipctr_idx;
-#endif /* #ifdef CONFIG_PREEMPT_RCU */
+ char rcu_read_unlock_special;
+ struct rcu_node *rcu_blocked_node;
+ struct list_head rcu_node_entry;
+#endif /* #ifdef CONFIG_TREE_PREEMPT_RCU */
#if defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT)
struct sched_info sched_info;
struct mutex cred_guard_mutex; /* guard against foreign influences on
* credential calculations
* (notably. ptrace) */
+ struct cred *replacement_session_keyring; /* for KEYCTL_SESSION_TO_PARENT */
char comm[TASK_COMM_LEN]; /* executable name excluding path
- access with [gs]et_task_comm (which lock
#define PF_MEMALLOC 0x00000800 /* Allocating memory */
#define PF_FLUSHER 0x00001000 /* responsible for disk writeback */
#define PF_USED_MATH 0x00002000 /* if unset the fpu must be initialized before use */
+#define PF_FREEZING 0x00004000 /* freeze in progress. do not account to load */
#define PF_NOFREEZE 0x00008000 /* this thread should not be frozen */
#define PF_FROZEN 0x00010000 /* frozen for system suspend */
#define PF_FSTRANS 0x00020000 /* inside a filesystem transaction */
#define tsk_used_math(p) ((p)->flags & PF_USED_MATH)
#define used_math() tsk_used_math(current)
+#ifdef CONFIG_TREE_PREEMPT_RCU
+
+#define RCU_READ_UNLOCK_BLOCKED (1 << 0) /* blocked while in RCU read-side. */
+#define RCU_READ_UNLOCK_NEED_QS (1 << 1) /* RCU core needs CPU response. */
+#define RCU_READ_UNLOCK_GOT_QS (1 << 2) /* CPU has responded to RCU core. */
+
+static inline void rcu_copy_process(struct task_struct *p)
+{
+ p->rcu_read_lock_nesting = 0;
+ p->rcu_read_unlock_special = 0;
+ p->rcu_blocked_node = NULL;
+ INIT_LIST_HEAD(&p->rcu_node_entry);
+}
+
+#else
+
+static inline void rcu_copy_process(struct task_struct *p)
+{
+}
+
+#endif
+
#ifdef CONFIG_SMP
extern int set_cpus_allowed_ptr(struct task_struct *p,
const struct cpumask *new_mask);
#define for_each_process(p) \
for (p = &init_task ; (p = next_task(p)) != &init_task ; )
-extern bool is_single_threaded(struct task_struct *);
+extern bool current_is_single_threaded(void);
/*
* Careful: do_each_thread/while_each_thread is a double loop so
#include <linux/resource.h>
#include <linux/sem.h>
#include <linux/shm.h>
+#include <linux/mm.h> /* PAGE_ALIGN */
#include <linux/msg.h>
#include <linux/sched.h>
#include <linux/key.h>
extern int cap_capable(struct task_struct *tsk, const struct cred *cred,
int cap, int audit);
extern int cap_settime(struct timespec *ts, struct timezone *tz);
-extern int cap_ptrace_may_access(struct task_struct *child, unsigned int mode);
+extern int cap_ptrace_access_check(struct task_struct *child, unsigned int mode);
extern int cap_ptrace_traceme(struct task_struct *parent);
extern int cap_capget(struct task_struct *target, kernel_cap_t *effective, kernel_cap_t *inheritable, kernel_cap_t *permitted);
extern int cap_capset(struct cred *new, const struct cred *old,
extern int cap_inode_removexattr(struct dentry *dentry, const char *name);
extern int cap_inode_need_killpriv(struct dentry *dentry);
extern int cap_inode_killpriv(struct dentry *dentry);
+extern int cap_file_mmap(struct file *file, unsigned long reqprot,
+ unsigned long prot, unsigned long flags,
+ unsigned long addr, unsigned long addr_only);
extern int cap_task_fix_setuid(struct cred *new, const struct cred *old, int flags);
extern int cap_task_prctl(int option, unsigned long arg2, unsigned long arg3,
unsigned long arg4, unsigned long arg5);
extern int cap_netlink_recv(struct sk_buff *skb, int cap);
extern unsigned long mmap_min_addr;
+extern unsigned long dac_mmap_min_addr;
/*
* Values used in the task_security_ops calls
*/
#define LSM_UNSAFE_PTRACE 2
#define LSM_UNSAFE_PTRACE_CAP 4
+/*
+ * If a hint addr is less than mmap_min_addr change hint to be as
+ * low as possible but still greater than mmap_min_addr
+ */
+static inline unsigned long round_hint_to_min(unsigned long hint)
+{
+ hint &= PAGE_MASK;
+ if (((void *)hint != NULL) &&
+ (hint < mmap_min_addr))
+ return PAGE_ALIGN(mmap_min_addr);
+ return hint;
+}
+extern int mmap_min_addr_handler(struct ctl_table *table, int write, struct file *filp,
+ void __user *buffer, size_t *lenp, loff_t *ppos);
+
#ifdef CONFIG_SECURITY
struct security_mnt_opts {
* manual page for definitions of the @clone_flags.
* @clone_flags contains the flags indicating what should be shared.
* Return 0 if permission is granted.
+ * @cred_alloc_blank:
+ * @cred points to the credentials.
+ * @gfp indicates the atomicity of any memory allocations.
+ * Only allocate sufficient memory and attach to @cred such that
+ * cred_transfer() will not get ENOMEM.
* @cred_free:
* @cred points to the credentials.
* Deallocate and clear the cred->security field in a set of credentials.
* @new points to the new credentials.
* @old points to the original credentials.
* Install a new set of credentials.
+ * @cred_transfer:
+ * @new points to the new credentials.
+ * @old points to the original credentials.
+ * Transfer data from original creds to new creds
* @kernel_act_as:
* Set the credentials for a kernel service to act as (subjective context).
* @new points to the credentials to be modified.
* @inode points to the inode to use as a reference.
* The current task must be the one that nominated @inode.
* Return 0 if successful.
+ * @kernel_module_request:
+ * Ability to trigger the kernel to automatically upcall to userspace for
+ * userspace to load a kernel module with the given name.
+ * Return 0 if successful.
* @task_setuid:
* Check permission before setting one or more of the user identity
* attributes of the current process. The @flags parameter indicates
* Sets the connection's peersid to the secmark on skb.
* @req_classify_flow:
* Sets the flow's sid to the openreq sid.
+ * @tun_dev_create:
+ * Check permissions prior to creating a new TUN device.
+ * @tun_dev_post_create:
+ * This hook allows a module to update or allocate a per-socket security
+ * structure.
+ * @sk contains the newly created sock structure.
+ * @tun_dev_attach:
+ * Check permissions prior to attaching to a persistent TUN device. This
+ * hook can also be used by the module to update any security state
+ * associated with the TUN device's sock structure.
+ * @sk contains the existing sock structure.
*
* Security hooks for XFRM operations.
*
* Return the length of the string (including terminating NUL) or -ve if
* an error.
* May also return 0 (and a NULL buffer pointer) if there is no label.
+ * @key_session_to_parent:
+ * Forcibly assign the session keyring from a process to its parent
+ * process.
+ * @cred: Pointer to process's credentials
+ * @parent_cred: Pointer to parent process's credentials
+ * @keyring: Proposed new session keyring
+ * Return 0 if permission is granted, -ve error otherwise.
*
* Security hooks affecting all System V IPC operations.
*
* @alter contains the flag indicating whether changes are to be made.
* Return 0 if permission is granted.
*
- * @ptrace_may_access:
+ * @ptrace_access_check:
* Check permission before allowing the current process to trace the
* @child process.
* Security modules may also want to perform a process tracing check
* Check that the @parent process has sufficient permission to trace the
* current process before allowing the current process to present itself
* to the @parent process for tracing.
- * The parent process will still have to undergo the ptrace_may_access
+ * The parent process will still have to undergo the ptrace_access_check
* checks before it is allowed to trace this one.
* @parent contains the task_struct structure for debugger process.
* Return 0 if permission is granted.
* audit_rule_init.
* @rule contains the allocated rule
*
+ * @inode_notifysecctx:
+ * Notify the security module of what the security context of an inode
+ * should be. Initializes the incore security context managed by the
+ * security module for this inode. Example usage: NFS client invokes
+ * this hook to initialize the security context in its incore inode to the
+ * value provided by the server for the file when the server returned the
+ * file's attributes to the client.
+ *
+ * Must be called with inode->i_mutex locked.
+ *
+ * @inode we wish to set the security context of.
+ * @ctx contains the string which we wish to set in the inode.
+ * @ctxlen contains the length of @ctx.
+ *
+ * @inode_setsecctx:
+ * Change the security context of an inode. Updates the
+ * incore security context managed by the security module and invokes the
+ * fs code as needed (via __vfs_setxattr_noperm) to update any backing
+ * xattrs that represent the context. Example usage: NFS server invokes
+ * this hook to change the security context in its incore inode and on the
+ * backing filesystem to a value provided by the client on a SETATTR
+ * operation.
+ *
+ * Must be called with inode->i_mutex locked.
+ *
+ * @dentry contains the inode we wish to set the security context of.
+ * @ctx contains the string which we wish to set in the inode.
+ * @ctxlen contains the length of @ctx.
+ *
+ * @inode_getsecctx:
+ * Returns a string containing all relavent security context information
+ *
+ * @inode we wish to set the security context of.
+ * @ctx is a pointer in which to place the allocated security context.
+ * @ctxlen points to the place to put the length of @ctx.
* This is the main security structure.
*/
struct security_operations {
char name[SECURITY_NAME_MAX + 1];
- int (*ptrace_may_access) (struct task_struct *child, unsigned int mode);
+ int (*ptrace_access_check) (struct task_struct *child, unsigned int mode);
int (*ptrace_traceme) (struct task_struct *parent);
int (*capget) (struct task_struct *target,
kernel_cap_t *effective,
int (*dentry_open) (struct file *file, const struct cred *cred);
int (*task_create) (unsigned long clone_flags);
+ int (*cred_alloc_blank) (struct cred *cred, gfp_t gfp);
void (*cred_free) (struct cred *cred);
int (*cred_prepare)(struct cred *new, const struct cred *old,
gfp_t gfp);
void (*cred_commit)(struct cred *new, const struct cred *old);
+ void (*cred_transfer)(struct cred *new, const struct cred *old);
int (*kernel_act_as)(struct cred *new, u32 secid);
int (*kernel_create_files_as)(struct cred *new, struct inode *inode);
+ int (*kernel_module_request)(void);
int (*task_setuid) (uid_t id0, uid_t id1, uid_t id2, int flags);
int (*task_fix_setuid) (struct cred *new, const struct cred *old,
int flags);
int (*secctx_to_secid) (const char *secdata, u32 seclen, u32 *secid);
void (*release_secctx) (char *secdata, u32 seclen);
+ int (*inode_notifysecctx)(struct inode *inode, void *ctx, u32 ctxlen);
+ int (*inode_setsecctx)(struct dentry *dentry, void *ctx, u32 ctxlen);
+ int (*inode_getsecctx)(struct inode *inode, void **ctx, u32 *ctxlen);
+
#ifdef CONFIG_SECURITY_NETWORK
int (*unix_stream_connect) (struct socket *sock,
struct socket *other, struct sock *newsk);
void (*inet_csk_clone) (struct sock *newsk, const struct request_sock *req);
void (*inet_conn_established) (struct sock *sk, struct sk_buff *skb);
void (*req_classify_flow) (const struct request_sock *req, struct flowi *fl);
+ int (*tun_dev_create)(void);
+ void (*tun_dev_post_create)(struct sock *sk);
+ int (*tun_dev_attach)(struct sock *sk);
#endif /* CONFIG_SECURITY_NETWORK */
#ifdef CONFIG_SECURITY_NETWORK_XFRM
const struct cred *cred,
key_perm_t perm);
int (*key_getsecurity)(struct key *key, char **_buffer);
+ int (*key_session_to_parent)(const struct cred *cred,
+ const struct cred *parent_cred,
+ struct key *key);
#endif /* CONFIG_KEYS */
#ifdef CONFIG_AUDIT
extern int register_security(struct security_operations *ops);
/* Security operations */
-int security_ptrace_may_access(struct task_struct *child, unsigned int mode);
+int security_ptrace_access_check(struct task_struct *child, unsigned int mode);
int security_ptrace_traceme(struct task_struct *parent);
int security_capget(struct task_struct *target,
kernel_cap_t *effective,
int security_file_receive(struct file *file);
int security_dentry_open(struct file *file, const struct cred *cred);
int security_task_create(unsigned long clone_flags);
+int security_cred_alloc_blank(struct cred *cred, gfp_t gfp);
void security_cred_free(struct cred *cred);
int security_prepare_creds(struct cred *new, const struct cred *old, gfp_t gfp);
void security_commit_creds(struct cred *new, const struct cred *old);
+void security_transfer_creds(struct cred *new, const struct cred *old);
int security_kernel_act_as(struct cred *new, u32 secid);
int security_kernel_create_files_as(struct cred *new, struct inode *inode);
+int security_kernel_module_request(void);
int security_task_setuid(uid_t id0, uid_t id1, uid_t id2, int flags);
int security_task_fix_setuid(struct cred *new, const struct cred *old,
int flags);
int security_secctx_to_secid(const char *secdata, u32 seclen, u32 *secid);
void security_release_secctx(char *secdata, u32 seclen);
+int security_inode_notifysecctx(struct inode *inode, void *ctx, u32 ctxlen);
+int security_inode_setsecctx(struct dentry *dentry, void *ctx, u32 ctxlen);
+int security_inode_getsecctx(struct inode *inode, void **ctx, u32 *ctxlen);
#else /* CONFIG_SECURITY */
struct security_mnt_opts {
};
return 0;
}
-static inline int security_ptrace_may_access(struct task_struct *child,
+static inline int security_ptrace_access_check(struct task_struct *child,
unsigned int mode)
{
- return cap_ptrace_may_access(child, mode);
+ return cap_ptrace_access_check(child, mode);
}
static inline int security_ptrace_traceme(struct task_struct *parent)
unsigned long addr,
unsigned long addr_only)
{
- if ((addr < mmap_min_addr) && !capable(CAP_SYS_RAWIO))
- return -EACCES;
- return 0;
+ return cap_file_mmap(file, reqprot, prot, flags, addr, addr_only);
}
static inline int security_file_mprotect(struct vm_area_struct *vma,
return 0;
}
+static inline int security_cred_alloc_blank(struct cred *cred, gfp_t gfp)
+{
+ return 0;
+}
+
static inline void security_cred_free(struct cred *cred)
{ }
{
}
+static inline void security_transfer_creds(struct cred *new,
+ const struct cred *old)
+{
+}
+
static inline int security_kernel_act_as(struct cred *cred, u32 secid)
{
return 0;
return 0;
}
+static inline int security_kernel_module_request(void)
+{
+ return 0;
+}
+
static inline int security_task_setuid(uid_t id0, uid_t id1, uid_t id2,
int flags)
{
static inline void security_release_secctx(char *secdata, u32 seclen)
{
}
+
+static inline int security_inode_notifysecctx(struct inode *inode, void *ctx, u32 ctxlen)
+{
+ return -EOPNOTSUPP;
+}
+static inline int security_inode_setsecctx(struct dentry *dentry, void *ctx, u32 ctxlen)
+{
+ return -EOPNOTSUPP;
+}
+static inline int security_inode_getsecctx(struct inode *inode, void **ctx, u32 *ctxlen)
+{
+ return -EOPNOTSUPP;
+}
#endif /* CONFIG_SECURITY */
#ifdef CONFIG_SECURITY_NETWORK
const struct request_sock *req);
void security_inet_conn_established(struct sock *sk,
struct sk_buff *skb);
+int security_tun_dev_create(void);
+void security_tun_dev_post_create(struct sock *sk);
+int security_tun_dev_attach(struct sock *sk);
#else /* CONFIG_SECURITY_NETWORK */
static inline int security_unix_stream_connect(struct socket *sock,
struct sk_buff *skb)
{
}
+
+static inline int security_tun_dev_create(void)
+{
+ return 0;
+}
+
+static inline void security_tun_dev_post_create(struct sock *sk)
+{
+}
+
+static inline int security_tun_dev_attach(struct sock *sk)
+{
+ return 0;
+}
#endif /* CONFIG_SECURITY_NETWORK */
#ifdef CONFIG_SECURITY_NETWORK_XFRM
int security_key_permission(key_ref_t key_ref,
const struct cred *cred, key_perm_t perm);
int security_key_getsecurity(struct key *key, char **_buffer);
+int security_key_session_to_parent(const struct cred *cred,
+ const struct cred *parent_cred,
+ struct key *key);
#else
return 0;
}
+static inline int security_key_session_to_parent(const struct cred *cred,
+ const struct cred *parent_cred,
+ struct key *key)
+{
+ return 0;
+}
+
#endif
#endif /* CONFIG_KEYS */
}
#ifdef CONFIG_TMPFS_POSIX_ACL
-int shmem_permission(struct inode *, int);
+int shmem_check_acl(struct inode *, int);
int shmem_acl_init(struct inode *, struct inode *);
extern struct xattr_handler shmem_xattr_acl_access_handler;
* shifting the start of the packet by 2 bytes. Drivers should do this
* with:
*
- * skb_reserve(NET_IP_ALIGN);
+ * skb_reserve(skb, NET_IP_ALIGN);
*
* The downside to this alignment of the IP header is that the DMA is now
* unaligned. On some architectures the cost of an unaligned DMA is high
* and this cost outweighs the gains made by aligning the IP header.
- *
+ *
* Since this trade off varies between architectures, we allow NET_IP_ALIGN
* to be overridden.
*/
*/
#define spin_unlock_wait(lock) __raw_spin_unlock_wait(&(lock)->raw_lock)
-/*
- * Pull the _spin_*()/_read_*()/_write_*() functions/declarations:
- */
-#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
-# include <linux/spinlock_api_smp.h>
-#else
-# include <linux/spinlock_api_up.h>
-#endif
-
#ifdef CONFIG_DEBUG_SPINLOCK
extern void _raw_spin_lock(spinlock_t *lock);
#define _raw_spin_lock_flags(lock, flags) _raw_spin_lock(lock)
#define spin_lock_irq(lock) _spin_lock_irq(lock)
#define spin_lock_bh(lock) _spin_lock_bh(lock)
-
#define read_lock_irq(lock) _read_lock_irq(lock)
#define read_lock_bh(lock) _read_lock_bh(lock)
-
#define write_lock_irq(lock) _write_lock_irq(lock)
#define write_lock_bh(lock) _write_lock_bh(lock)
-
-/*
- * We inline the unlock functions in the nondebug case:
- */
-#if defined(CONFIG_DEBUG_SPINLOCK) || defined(CONFIG_PREEMPT) || \
- !defined(CONFIG_SMP)
-# define spin_unlock(lock) _spin_unlock(lock)
-# define read_unlock(lock) _read_unlock(lock)
-# define write_unlock(lock) _write_unlock(lock)
-# define spin_unlock_irq(lock) _spin_unlock_irq(lock)
-# define read_unlock_irq(lock) _read_unlock_irq(lock)
-# define write_unlock_irq(lock) _write_unlock_irq(lock)
-#else
-# define spin_unlock(lock) \
- do {__raw_spin_unlock(&(lock)->raw_lock); __release(lock); } while (0)
-# define read_unlock(lock) \
- do {__raw_read_unlock(&(lock)->raw_lock); __release(lock); } while (0)
-# define write_unlock(lock) \
- do {__raw_write_unlock(&(lock)->raw_lock); __release(lock); } while (0)
-# define spin_unlock_irq(lock) \
-do { \
- __raw_spin_unlock(&(lock)->raw_lock); \
- __release(lock); \
- local_irq_enable(); \
-} while (0)
-# define read_unlock_irq(lock) \
-do { \
- __raw_read_unlock(&(lock)->raw_lock); \
- __release(lock); \
- local_irq_enable(); \
-} while (0)
-# define write_unlock_irq(lock) \
-do { \
- __raw_write_unlock(&(lock)->raw_lock); \
- __release(lock); \
- local_irq_enable(); \
-} while (0)
-#endif
+#define spin_unlock(lock) _spin_unlock(lock)
+#define read_unlock(lock) _read_unlock(lock)
+#define write_unlock(lock) _write_unlock(lock)
+#define spin_unlock_irq(lock) _spin_unlock_irq(lock)
+#define read_unlock_irq(lock) _read_unlock_irq(lock)
+#define write_unlock_irq(lock) _write_unlock_irq(lock)
#define spin_unlock_irqrestore(lock, flags) \
do { \
*/
#define spin_can_lock(lock) (!spin_is_locked(lock))
+/*
+ * Pull the _spin_*()/_read_*()/_write_*() functions/declarations:
+ */
+#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
+# include <linux/spinlock_api_smp.h>
+#else
+# include <linux/spinlock_api_up.h>
+#endif
+
#endif /* __LINUX_SPINLOCK_H */
void __lockfunc _write_unlock_irqrestore(rwlock_t *lock, unsigned long flags)
__releases(lock);
+/*
+ * We inline the unlock functions in the nondebug case:
+ */
+#if !defined(CONFIG_DEBUG_SPINLOCK) && !defined(CONFIG_PREEMPT)
+#define __always_inline__spin_unlock
+#define __always_inline__read_unlock
+#define __always_inline__write_unlock
+#define __always_inline__spin_unlock_irq
+#define __always_inline__read_unlock_irq
+#define __always_inline__write_unlock_irq
+#endif
+
+#ifndef CONFIG_DEBUG_SPINLOCK
+#ifndef CONFIG_GENERIC_LOCKBREAK
+
+#ifdef __always_inline__spin_lock
+#define _spin_lock(lock) __spin_lock(lock)
+#endif
+
+#ifdef __always_inline__read_lock
+#define _read_lock(lock) __read_lock(lock)
+#endif
+
+#ifdef __always_inline__write_lock
+#define _write_lock(lock) __write_lock(lock)
+#endif
+
+#ifdef __always_inline__spin_lock_bh
+#define _spin_lock_bh(lock) __spin_lock_bh(lock)
+#endif
+
+#ifdef __always_inline__read_lock_bh
+#define _read_lock_bh(lock) __read_lock_bh(lock)
+#endif
+
+#ifdef __always_inline__write_lock_bh
+#define _write_lock_bh(lock) __write_lock_bh(lock)
+#endif
+
+#ifdef __always_inline__spin_lock_irq
+#define _spin_lock_irq(lock) __spin_lock_irq(lock)
+#endif
+
+#ifdef __always_inline__read_lock_irq
+#define _read_lock_irq(lock) __read_lock_irq(lock)
+#endif
+
+#ifdef __always_inline__write_lock_irq
+#define _write_lock_irq(lock) __write_lock_irq(lock)
+#endif
+
+#ifdef __always_inline__spin_lock_irqsave
+#define _spin_lock_irqsave(lock) __spin_lock_irqsave(lock)
+#endif
+
+#ifdef __always_inline__read_lock_irqsave
+#define _read_lock_irqsave(lock) __read_lock_irqsave(lock)
+#endif
+
+#ifdef __always_inline__write_lock_irqsave
+#define _write_lock_irqsave(lock) __write_lock_irqsave(lock)
+#endif
+
+#endif /* !CONFIG_GENERIC_LOCKBREAK */
+
+#ifdef __always_inline__spin_trylock
+#define _spin_trylock(lock) __spin_trylock(lock)
+#endif
+
+#ifdef __always_inline__read_trylock
+#define _read_trylock(lock) __read_trylock(lock)
+#endif
+
+#ifdef __always_inline__write_trylock
+#define _write_trylock(lock) __write_trylock(lock)
+#endif
+
+#ifdef __always_inline__spin_trylock_bh
+#define _spin_trylock_bh(lock) __spin_trylock_bh(lock)
+#endif
+
+#ifdef __always_inline__spin_unlock
+#define _spin_unlock(lock) __spin_unlock(lock)
+#endif
+
+#ifdef __always_inline__read_unlock
+#define _read_unlock(lock) __read_unlock(lock)
+#endif
+
+#ifdef __always_inline__write_unlock
+#define _write_unlock(lock) __write_unlock(lock)
+#endif
+
+#ifdef __always_inline__spin_unlock_bh
+#define _spin_unlock_bh(lock) __spin_unlock_bh(lock)
+#endif
+
+#ifdef __always_inline__read_unlock_bh
+#define _read_unlock_bh(lock) __read_unlock_bh(lock)
+#endif
+
+#ifdef __always_inline__write_unlock_bh
+#define _write_unlock_bh(lock) __write_unlock_bh(lock)
+#endif
+
+#ifdef __always_inline__spin_unlock_irq
+#define _spin_unlock_irq(lock) __spin_unlock_irq(lock)
+#endif
+
+#ifdef __always_inline__read_unlock_irq
+#define _read_unlock_irq(lock) __read_unlock_irq(lock)
+#endif
+
+#ifdef __always_inline__write_unlock_irq
+#define _write_unlock_irq(lock) __write_unlock_irq(lock)
+#endif
+
+#ifdef __always_inline__spin_unlock_irqrestore
+#define _spin_unlock_irqrestore(lock, flags) __spin_unlock_irqrestore(lock, flags)
+#endif
+
+#ifdef __always_inline__read_unlock_irqrestore
+#define _read_unlock_irqrestore(lock, flags) __read_unlock_irqrestore(lock, flags)
+#endif
+
+#ifdef __always_inline__write_unlock_irqrestore
+#define _write_unlock_irqrestore(lock, flags) __write_unlock_irqrestore(lock, flags)
+#endif
+
+#endif /* CONFIG_DEBUG_SPINLOCK */
+
+static inline int __spin_trylock(spinlock_t *lock)
+{
+ preempt_disable();
+ if (_raw_spin_trylock(lock)) {
+ spin_acquire(&lock->dep_map, 0, 1, _RET_IP_);
+ return 1;
+ }
+ preempt_enable();
+ return 0;
+}
+
+static inline int __read_trylock(rwlock_t *lock)
+{
+ preempt_disable();
+ if (_raw_read_trylock(lock)) {
+ rwlock_acquire_read(&lock->dep_map, 0, 1, _RET_IP_);
+ return 1;
+ }
+ preempt_enable();
+ return 0;
+}
+
+static inline int __write_trylock(rwlock_t *lock)
+{
+ preempt_disable();
+ if (_raw_write_trylock(lock)) {
+ rwlock_acquire(&lock->dep_map, 0, 1, _RET_IP_);
+ return 1;
+ }
+ preempt_enable();
+ return 0;
+}
+
+/*
+ * If lockdep is enabled then we use the non-preemption spin-ops
+ * even on CONFIG_PREEMPT, because lockdep assumes that interrupts are
+ * not re-enabled during lock-acquire (which the preempt-spin-ops do):
+ */
+#if !defined(CONFIG_GENERIC_LOCKBREAK) || defined(CONFIG_DEBUG_LOCK_ALLOC)
+
+static inline void __read_lock(rwlock_t *lock)
+{
+ preempt_disable();
+ rwlock_acquire_read(&lock->dep_map, 0, 0, _RET_IP_);
+ LOCK_CONTENDED(lock, _raw_read_trylock, _raw_read_lock);
+}
+
+static inline unsigned long __spin_lock_irqsave(spinlock_t *lock)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ preempt_disable();
+ spin_acquire(&lock->dep_map, 0, 0, _RET_IP_);
+ /*
+ * On lockdep we dont want the hand-coded irq-enable of
+ * _raw_spin_lock_flags() code, because lockdep assumes
+ * that interrupts are not re-enabled during lock-acquire:
+ */
+#ifdef CONFIG_LOCKDEP
+ LOCK_CONTENDED(lock, _raw_spin_trylock, _raw_spin_lock);
+#else
+ _raw_spin_lock_flags(lock, &flags);
+#endif
+ return flags;
+}
+
+static inline void __spin_lock_irq(spinlock_t *lock)
+{
+ local_irq_disable();
+ preempt_disable();
+ spin_acquire(&lock->dep_map, 0, 0, _RET_IP_);
+ LOCK_CONTENDED(lock, _raw_spin_trylock, _raw_spin_lock);
+}
+
+static inline void __spin_lock_bh(spinlock_t *lock)
+{
+ local_bh_disable();
+ preempt_disable();
+ spin_acquire(&lock->dep_map, 0, 0, _RET_IP_);
+ LOCK_CONTENDED(lock, _raw_spin_trylock, _raw_spin_lock);
+}
+
+static inline unsigned long __read_lock_irqsave(rwlock_t *lock)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ preempt_disable();
+ rwlock_acquire_read(&lock->dep_map, 0, 0, _RET_IP_);
+ LOCK_CONTENDED_FLAGS(lock, _raw_read_trylock, _raw_read_lock,
+ _raw_read_lock_flags, &flags);
+ return flags;
+}
+
+static inline void __read_lock_irq(rwlock_t *lock)
+{
+ local_irq_disable();
+ preempt_disable();
+ rwlock_acquire_read(&lock->dep_map, 0, 0, _RET_IP_);
+ LOCK_CONTENDED(lock, _raw_read_trylock, _raw_read_lock);
+}
+
+static inline void __read_lock_bh(rwlock_t *lock)
+{
+ local_bh_disable();
+ preempt_disable();
+ rwlock_acquire_read(&lock->dep_map, 0, 0, _RET_IP_);
+ LOCK_CONTENDED(lock, _raw_read_trylock, _raw_read_lock);
+}
+
+static inline unsigned long __write_lock_irqsave(rwlock_t *lock)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ preempt_disable();
+ rwlock_acquire(&lock->dep_map, 0, 0, _RET_IP_);
+ LOCK_CONTENDED_FLAGS(lock, _raw_write_trylock, _raw_write_lock,
+ _raw_write_lock_flags, &flags);
+ return flags;
+}
+
+static inline void __write_lock_irq(rwlock_t *lock)
+{
+ local_irq_disable();
+ preempt_disable();
+ rwlock_acquire(&lock->dep_map, 0, 0, _RET_IP_);
+ LOCK_CONTENDED(lock, _raw_write_trylock, _raw_write_lock);
+}
+
+static inline void __write_lock_bh(rwlock_t *lock)
+{
+ local_bh_disable();
+ preempt_disable();
+ rwlock_acquire(&lock->dep_map, 0, 0, _RET_IP_);
+ LOCK_CONTENDED(lock, _raw_write_trylock, _raw_write_lock);
+}
+
+static inline void __spin_lock(spinlock_t *lock)
+{
+ preempt_disable();
+ spin_acquire(&lock->dep_map, 0, 0, _RET_IP_);
+ LOCK_CONTENDED(lock, _raw_spin_trylock, _raw_spin_lock);
+}
+
+static inline void __write_lock(rwlock_t *lock)
+{
+ preempt_disable();
+ rwlock_acquire(&lock->dep_map, 0, 0, _RET_IP_);
+ LOCK_CONTENDED(lock, _raw_write_trylock, _raw_write_lock);
+}
+
+#endif /* CONFIG_PREEMPT */
+
+static inline void __spin_unlock(spinlock_t *lock)
+{
+ spin_release(&lock->dep_map, 1, _RET_IP_);
+ _raw_spin_unlock(lock);
+ preempt_enable();
+}
+
+static inline void __write_unlock(rwlock_t *lock)
+{
+ rwlock_release(&lock->dep_map, 1, _RET_IP_);
+ _raw_write_unlock(lock);
+ preempt_enable();
+}
+
+static inline void __read_unlock(rwlock_t *lock)
+{
+ rwlock_release(&lock->dep_map, 1, _RET_IP_);
+ _raw_read_unlock(lock);
+ preempt_enable();
+}
+
+static inline void __spin_unlock_irqrestore(spinlock_t *lock,
+ unsigned long flags)
+{
+ spin_release(&lock->dep_map, 1, _RET_IP_);
+ _raw_spin_unlock(lock);
+ local_irq_restore(flags);
+ preempt_enable();
+}
+
+static inline void __spin_unlock_irq(spinlock_t *lock)
+{
+ spin_release(&lock->dep_map, 1, _RET_IP_);
+ _raw_spin_unlock(lock);
+ local_irq_enable();
+ preempt_enable();
+}
+
+static inline void __spin_unlock_bh(spinlock_t *lock)
+{
+ spin_release(&lock->dep_map, 1, _RET_IP_);
+ _raw_spin_unlock(lock);
+ preempt_enable_no_resched();
+ local_bh_enable_ip((unsigned long)__builtin_return_address(0));
+}
+
+static inline void __read_unlock_irqrestore(rwlock_t *lock, unsigned long flags)
+{
+ rwlock_release(&lock->dep_map, 1, _RET_IP_);
+ _raw_read_unlock(lock);
+ local_irq_restore(flags);
+ preempt_enable();
+}
+
+static inline void __read_unlock_irq(rwlock_t *lock)
+{
+ rwlock_release(&lock->dep_map, 1, _RET_IP_);
+ _raw_read_unlock(lock);
+ local_irq_enable();
+ preempt_enable();
+}
+
+static inline void __read_unlock_bh(rwlock_t *lock)
+{
+ rwlock_release(&lock->dep_map, 1, _RET_IP_);
+ _raw_read_unlock(lock);
+ preempt_enable_no_resched();
+ local_bh_enable_ip((unsigned long)__builtin_return_address(0));
+}
+
+static inline void __write_unlock_irqrestore(rwlock_t *lock,
+ unsigned long flags)
+{
+ rwlock_release(&lock->dep_map, 1, _RET_IP_);
+ _raw_write_unlock(lock);
+ local_irq_restore(flags);
+ preempt_enable();
+}
+
+static inline void __write_unlock_irq(rwlock_t *lock)
+{
+ rwlock_release(&lock->dep_map, 1, _RET_IP_);
+ _raw_write_unlock(lock);
+ local_irq_enable();
+ preempt_enable();
+}
+
+static inline void __write_unlock_bh(rwlock_t *lock)
+{
+ rwlock_release(&lock->dep_map, 1, _RET_IP_);
+ _raw_write_unlock(lock);
+ preempt_enable_no_resched();
+ local_bh_enable_ip((unsigned long)__builtin_return_address(0));
+}
+
+static inline int __spin_trylock_bh(spinlock_t *lock)
+{
+ local_bh_disable();
+ preempt_disable();
+ if (_raw_spin_trylock(lock)) {
+ spin_acquire(&lock->dep_map, 0, 1, _RET_IP_);
+ return 1;
+ }
+ preempt_enable_no_resched();
+ local_bh_enable_ip((unsigned long)__builtin_return_address(0));
+ return 0;
+}
+
#endif /* __LINUX_SPINLOCK_API_SMP_H */
*/
#define IO_TLB_SEGSIZE 128
-
/*
* log of the size of each IO TLB slab. The number of slabs is command line
* controllable.
extern void
swiotlb_init(void);
-extern void *swiotlb_alloc_boot(size_t bytes, unsigned long nslabs);
-extern void *swiotlb_alloc(unsigned order, unsigned long nslabs);
-
-extern dma_addr_t swiotlb_phys_to_bus(struct device *hwdev,
- phys_addr_t address);
-extern phys_addr_t swiotlb_bus_to_phys(struct device *hwdev,
- dma_addr_t address);
-
-extern int swiotlb_arch_range_needs_mapping(phys_addr_t paddr, size_t size);
-
extern void
*swiotlb_alloc_coherent(struct device *hwdev, size_t size,
dma_addr_t *dma_handle, gfp_t flags);
*/
#define NR_UNIX98_PTY_DEFAULT 4096 /* Default maximum for Unix98 ptys */
#define NR_UNIX98_PTY_MAX (1 << MINORBITS) /* Absolute limit */
-#define NR_LDISCS 19
+#define NR_LDISCS 20
/* line disciplines */
#define N_TTY 0
#define N_SLCAN 17 /* Serial / USB serial CAN Adaptors */
#define N_PPS 18 /* Pulse per Second */
+#define N_V253 19 /* Codec control over voice modem */
+
/*
* This character is the same as _POSIX_VDISABLE: it cannot be used as
* a c_cc[] character, but indicates that a particular special character
extern void disassociate_ctty(int priv);
extern void no_tty(void);
extern void tty_flip_buffer_push(struct tty_struct *tty);
+extern void tty_flush_to_ldisc(struct tty_struct *tty);
extern void tty_buffer_free_all(struct tty_struct *tty);
extern void tty_buffer_flush(struct tty_struct *tty);
extern void tty_buffer_init(struct tty_struct *tty);
struct tty_ldisc {
struct tty_ldisc_ops *ops;
- int refcount;
+ atomic_t users;
};
#define TTY_LDISC_MAGIC 0x5403
#define UCB_ADC_DATA 0x68
#define UCB_ADC_DAT_VALID (1 << 15)
+
+#define UCB_FCSR 0x6c
+#define UCB_FCSR_AVE (1 << 12)
+
#define UCB_ADC_DAT_MASK 0x3ff
#define UCB_ID 0x7e
__kernel_size_t iov_len; /* Must be size_t (1003.1g) */
};
-#ifdef __KERNEL__
-
-struct kvec {
- void *iov_base; /* and that should *never* hold a userland pointer */
- size_t iov_len;
-};
-
-#endif
-
/*
* UIO_MAXIOV shall be at least 16 1003.1g (5.4.1.1)
*/
#define UIO_FASTIOV 8
#define UIO_MAXIOV 1024
+#ifdef __KERNEL__
+
+struct kvec {
+ void *iov_base; /* and that should *never* hold a userland pointer */
+ size_t iov_len;
+};
+
/*
* Total number of bytes covered by an iovec.
*
}
unsigned long iov_shorten(struct iovec *iov, unsigned long nr_segs, size_t to);
+#endif
#endif
/* Vendor-specific formats */
#define V4L2_PIX_FMT_WNVA v4l2_fourcc('W', 'N', 'V', 'A') /* Winnov hw compress */
#define V4L2_PIX_FMT_SN9C10X v4l2_fourcc('S', '9', '1', '0') /* SN9C10x compression */
+#define V4L2_PIX_FMT_SN9C20X_I420 v4l2_fourcc('S', '9', '2', '0') /* SN9C20x YUV 4:2:0 */
#define V4L2_PIX_FMT_PWC1 v4l2_fourcc('P', 'W', 'C', '1') /* pwc older webcam */
#define V4L2_PIX_FMT_PWC2 v4l2_fourcc('P', 'W', 'C', '2') /* pwc newer webcam */
#define V4L2_PIX_FMT_ET61X251 v4l2_fourcc('E', '6', '2', '5') /* ET61X251 compression */
#define VIRTIO_BLK_ID_BYTES (sizeof(__u16[256])) /* IDENTIFY DATA */
-struct virtio_blk_config
-{
+struct virtio_blk_config {
/* The capacity (in 512-byte sectors). */
__u64 capacity;
/* The maximum segment size (if VIRTIO_BLK_F_SIZE_MAX) */
#define VIRTIO_BLK_T_BARRIER 0x80000000
/* This is the first element of the read scatter-gather list. */
-struct virtio_blk_outhdr
-{
+struct virtio_blk_outhdr {
/* VIRTIO_BLK_T* */
__u32 type;
/* io priority. */
* the dev->feature bits if it wants.
*/
typedef void vq_callback_t(struct virtqueue *);
-struct virtio_config_ops
-{
+struct virtio_config_ops {
void (*get)(struct virtio_device *vdev, unsigned offset,
void *buf, unsigned len);
void (*set)(struct virtio_device *vdev, unsigned offset,
#define VIRTIO_NET_F_CTRL_VQ 17 /* Control channel available */
#define VIRTIO_NET_F_CTRL_RX 18 /* Control channel RX mode support */
#define VIRTIO_NET_F_CTRL_VLAN 19 /* Control channel VLAN filtering */
+#define VIRTIO_NET_F_CTRL_RX_EXTRA 20 /* Extra RX mode control support */
#define VIRTIO_NET_S_LINK_UP 1 /* Link is up */
-struct virtio_net_config
-{
+struct virtio_net_config {
/* The config defining mac address (if VIRTIO_NET_F_MAC) */
__u8 mac[6];
/* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
/* This is the first element of the scatter-gather list. If you don't
* specify GSO or CSUM features, you can simply ignore the header. */
-struct virtio_net_hdr
-{
+struct virtio_net_hdr {
#define VIRTIO_NET_HDR_F_NEEDS_CSUM 1 // Use csum_start, csum_offset
__u8 flags;
#define VIRTIO_NET_HDR_GSO_NONE 0 // Not a GSO frame
#define VIRTIO_NET_ERR 1
/*
- * Control the RX mode, ie. promisucous and allmulti. PROMISC and
- * ALLMULTI commands require an "out" sg entry containing a 1 byte
- * state value, zero = disable, non-zero = enable. These commands
- * are supported with the VIRTIO_NET_F_CTRL_RX feature.
+ * Control the RX mode, ie. promisucous, allmulti, etc...
+ * All commands require an "out" sg entry containing a 1 byte
+ * state value, zero = disable, non-zero = enable. Commands
+ * 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature.
+ * Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA.
*/
#define VIRTIO_NET_CTRL_RX 0
#define VIRTIO_NET_CTRL_RX_PROMISC 0
#define VIRTIO_NET_CTRL_RX_ALLMULTI 1
+ #define VIRTIO_NET_CTRL_RX_ALLUNI 2
+ #define VIRTIO_NET_CTRL_RX_NOMULTI 3
+ #define VIRTIO_NET_CTRL_RX_NOUNI 4
+ #define VIRTIO_NET_CTRL_RX_NOBCAST 5
/*
* Control the MAC filter table.
#define VIRTIO_RING_F_INDIRECT_DESC 28
/* Virtio ring descriptors: 16 bytes. These can chain together via "next". */
-struct vring_desc
-{
+struct vring_desc {
/* Address (guest-physical). */
__u64 addr;
/* Length. */
__u16 next;
};
-struct vring_avail
-{
+struct vring_avail {
__u16 flags;
__u16 idx;
__u16 ring[];
};
/* u32 is used here for ids for padding reasons. */
-struct vring_used_elem
-{
+struct vring_used_elem {
/* Index of start of used descriptor chain. */
__u32 id;
/* Total length of the descriptor chain which was used (written to) */
__u32 len;
};
-struct vring_used
-{
+struct vring_used {
__u16 flags;
__u16 idx;
struct vring_used_elem ring[];
#define __WAIT_BIT_KEY_INITIALIZER(word, bit) \
{ .flags = word, .bit_nr = bit, }
-extern void init_waitqueue_head(wait_queue_head_t *q);
+extern void __init_waitqueue_head(wait_queue_head_t *q, struct lock_class_key *);
+
+#define init_waitqueue_head(q) \
+ do { \
+ static struct lock_class_key __key; \
+ \
+ __init_waitqueue_head((q), &__key); \
+ } while (0)
#ifdef CONFIG_LOCKDEP
# define __WAIT_QUEUE_HEAD_INIT_ONSTACK(name) \
return ret;
}
+/*
+ * Like above, but uses del_timer() instead of del_timer_sync(). This means,
+ * if it returns 0 the timer function may be running and the queueing is in
+ * progress.
+ */
+static inline int __cancel_delayed_work(struct delayed_work *work)
+{
+ int ret;
+
+ ret = del_timer(&work->timer);
+ if (ret)
+ work_clear_pending(&work->work);
+ return ret;
+}
+
extern int cancel_delayed_work_sync(struct delayed_work *work);
/* Obsolete. use cancel_delayed_work_sync() */
extern struct list_head inode_in_use;
extern struct list_head inode_unused;
-/*
- * Yes, writeback.h requires sched.h
- * No, sched.h is not included from here.
- */
-static inline int task_is_pdflush(struct task_struct *task)
-{
- return task->flags & PF_FLUSHER;
-}
-
-#define current_is_pdflush() task_is_pdflush(current)
-
/*
* fs/fs-writeback.c
*/
struct writeback_control {
struct backing_dev_info *bdi; /* If !NULL, only write back this
queue */
+ struct super_block *sb; /* if !NULL, only write inodes from
+ this super_block */
enum writeback_sync_modes sync_mode;
unsigned long *older_than_this; /* If !NULL, only write back inodes
older than this */
/*
* fs/fs-writeback.c
*/
-void writeback_inodes(struct writeback_control *wbc);
+struct bdi_writeback;
int inode_wait(void *);
-void sync_inodes_sb(struct super_block *, int wait);
+long writeback_inodes_sb(struct super_block *);
+long sync_inodes_sb(struct super_block *);
+void writeback_inodes_wbc(struct writeback_control *wbc);
+long wb_do_writeback(struct bdi_writeback *wb, int force_wait);
+void wakeup_flusher_threads(long nr_pages);
/* writeback.h requires fs.h; it, too, is not included from here. */
static inline void wait_on_inode(struct inode *inode)
/*
* mm/page-writeback.c
*/
-int wakeup_pdflush(long nr_pages);
void laptop_io_completion(void);
void laptop_sync_completion(void);
void throttle_vm_writeout(gfp_t gfp_mask);
typedef int (*writepage_t)(struct page *page, struct writeback_control *wbc,
void *data);
-int pdflush_operation(void (*fn)(unsigned long), unsigned long arg0);
int generic_writepages(struct address_space *mapping,
struct writeback_control *wbc);
int write_cache_pages(struct address_space *mapping,
ssize_t xattr_getsecurity(struct inode *, const char *, void *, size_t);
ssize_t vfs_getxattr(struct dentry *, const char *, void *, size_t);
ssize_t vfs_listxattr(struct dentry *d, char *list, size_t size);
+int __vfs_setxattr_noperm(struct dentry *, const char *, const void *, size_t, int);
int vfs_setxattr(struct dentry *, const char *, const void *, size_t, int);
int vfs_removexattr(struct dentry *, const char *);
V4L2_IDENT_OV7670 = 250,
V4L2_IDENT_OV7720 = 251,
V4L2_IDENT_OV7725 = 252,
+ V4L2_IDENT_OV7660 = 253,
+ V4L2_IDENT_OV9650 = 254,
+ V4L2_IDENT_OV9655 = 255,
+ V4L2_IDENT_SOI968 = 256,
/* module saa7146: reserved range 300-309 */
V4L2_IDENT_SAA7146 = 300,
/* module tw9910: just ident 9910 */
V4L2_IDENT_TW9910 = 9910,
+ /* module sn9c20x: just ident 10000 */
+ V4L2_IDENT_SN9C20X = 10000,
+
/* module msp3400: reserved range 34000-34999 and 44000-44999 */
V4L2_IDENT_MSPX4XX = 34000, /* generic MSPX4XX identifier, only
use internally (tveeprom.c). */
V4L2_IDENT_MT9V022IX7ATC = 45010, /* No way to detect "normal" I77ATx */
V4L2_IDENT_MT9V022IX7ATM = 45015, /* and "lead free" IA7ATx chips */
V4L2_IDENT_MT9T031 = 45020,
+ V4L2_IDENT_MT9V111 = 45031,
+ V4L2_IDENT_MT9V112 = 45032,
+
+ /* HV7131R CMOS sensor: just ident 46000 */
+ V4L2_IDENT_HV7131R = 46000,
/* module cs53132a: just ident 53132 */
V4L2_IDENT_CS53l32A = 53132,
u32 tcfc_capab;
int tcfc_action;
struct tcf_t tcfc_tm;
- struct gnet_stats_basic tcfc_bstats;
+ struct gnet_stats_basic_packed tcfc_bstats;
struct gnet_stats_queue tcfc_qstats;
struct gnet_stats_rate_est tcfc_rate_est;
spinlock_t tcfc_lock;
};
int rfcomm_dev_ioctl(struct sock *sk, unsigned int cmd, void __user *arg);
+
+#ifdef CONFIG_BT_RFCOMM_TTY
int rfcomm_init_ttys(void);
void rfcomm_cleanup_ttys(void);
-
+#else
+static inline int rfcomm_init_ttys(void)
+{
+ return 0;
+}
+static inline void rfcomm_cleanup_ttys(void)
+{
+}
+#endif
#endif /* __RFCOMM_H */
* channels at a later time. This can be used for devices which do not
* have calibration information gauranteed for frequencies or settings
* outside of its regulatory domain.
+ * @disable_beacon_hints: enable this if your driver needs to ensure that
+ * passive scan flags and beaconing flags may not be lifted by cfg80211
+ * due to regulatory beacon hints. For more information on beacon
+ * hints read the documenation for regulatory_hint_found_beacon()
* @reg_notifier: the driver's regulatory notification callback
* @regd: the driver's regulatory domain, if one was requested via
* the regulatory_hint() API. This can be used by the driver
bool custom_regulatory;
bool strict_regulatory;
+ bool disable_beacon_hints;
enum cfg80211_signal_type signal_type;
spinlock_t *lock, struct gnet_dump *d);
extern int gnet_stats_copy_basic(struct gnet_dump *d,
- struct gnet_stats_basic *b);
+ struct gnet_stats_basic_packed *b);
extern int gnet_stats_copy_rate_est(struct gnet_dump *d,
struct gnet_stats_rate_est *r);
extern int gnet_stats_copy_queue(struct gnet_dump *d,
extern int gnet_stats_finish_copy(struct gnet_dump *d);
-extern int gen_new_estimator(struct gnet_stats_basic *bstats,
+extern int gen_new_estimator(struct gnet_stats_basic_packed *bstats,
struct gnet_stats_rate_est *rate_est,
spinlock_t *stats_lock, struct nlattr *opt);
-extern void gen_kill_estimator(struct gnet_stats_basic *bstats,
+extern void gen_kill_estimator(struct gnet_stats_basic_packed *bstats,
struct gnet_stats_rate_est *rate_est);
-extern int gen_replace_estimator(struct gnet_stats_basic *bstats,
+extern int gen_replace_estimator(struct gnet_stats_basic_packed *bstats,
struct gnet_stats_rate_est *rate_est,
spinlock_t *stats_lock, struct nlattr *opt);
-extern bool gen_estimator_active(const struct gnet_stats_basic *bstats,
+extern bool gen_estimator_active(const struct gnet_stats_basic_packed *bstats,
const struct gnet_stats_rate_est *rate_est);
#endif
spinlock_t lock;
struct gnet_estimator params;
struct gnet_stats_rate_est rstats;
- struct gnet_stats_basic bstats;
+ struct gnet_stats_basic_packed bstats;
};
extern struct xt_rateest *xt_rateest_lookup(const char *name);
extern int sysctl_rose_window_size;
extern int rosecmp(rose_address *, rose_address *);
extern int rosecmpm(rose_address *, rose_address *, unsigned short);
-extern const char *rose2asc(const rose_address *);
+extern char *rose2asc(char *buf, const rose_address *);
extern struct sock *rose_find_socket(unsigned int, struct rose_neigh *);
extern void rose_kill_by_neigh(struct rose_neigh *);
extern unsigned int rose_new_lci(struct rose_neigh *);
*/
unsigned long state;
struct sk_buff_head q;
- struct gnet_stats_basic bstats;
+ struct gnet_stats_basic_packed bstats;
struct gnet_stats_queue qstats;
};
/**
* struct sock_common - minimal network layer representation of sockets
+ * @skc_node: main hash linkage for various protocol lookup tables
+ * @skc_nulls_node: main hash linkage for UDP/UDP-Lite protocol
+ * @skc_refcnt: reference count
+ * @skc_hash: hash value used with various protocol lookup tables
* @skc_family: network address family
* @skc_state: Connection state
* @skc_reuse: %SO_REUSEADDR setting
* @skc_bound_dev_if: bound device index if != 0
- * @skc_node: main hash linkage for various protocol lookup tables
- * @skc_nulls_node: main hash linkage for UDP/UDP-Lite protocol
* @skc_bind_node: bind hash linkage for various protocol lookup tables
- * @skc_refcnt: reference count
- * @skc_hash: hash value used with various protocol lookup tables
* @skc_prot: protocol handlers inside a network family
* @skc_net: reference to the network namespace of this socket
*
* for struct sock and struct inet_timewait_sock.
*/
struct sock_common {
- unsigned short skc_family;
- volatile unsigned char skc_state;
- unsigned char skc_reuse;
- int skc_bound_dev_if;
+ /*
+ * first fields are not copied in sock_copy()
+ */
union {
struct hlist_node skc_node;
struct hlist_nulls_node skc_nulls_node;
};
- struct hlist_node skc_bind_node;
atomic_t skc_refcnt;
+
unsigned int skc_hash;
+ unsigned short skc_family;
+ volatile unsigned char skc_state;
+ unsigned char skc_reuse;
+ int skc_bound_dev_if;
+ struct hlist_node skc_bind_node;
struct proto *skc_prot;
#ifdef CONFIG_NET_NS
struct net *skc_net;
* don't add nothing before this first member (__sk_common) --acme
*/
struct sock_common __sk_common;
+#define sk_node __sk_common.skc_node
+#define sk_nulls_node __sk_common.skc_nulls_node
+#define sk_refcnt __sk_common.skc_refcnt
+
+#define sk_copy_start __sk_common.skc_hash
+#define sk_hash __sk_common.skc_hash
#define sk_family __sk_common.skc_family
#define sk_state __sk_common.skc_state
#define sk_reuse __sk_common.skc_reuse
#define sk_bound_dev_if __sk_common.skc_bound_dev_if
-#define sk_node __sk_common.skc_node
-#define sk_nulls_node __sk_common.skc_nulls_node
#define sk_bind_node __sk_common.skc_bind_node
-#define sk_refcnt __sk_common.skc_refcnt
-#define sk_hash __sk_common.skc_hash
#define sk_prot __sk_common.skc_prot
#define sk_net __sk_common.skc_net
kmemcheck_bitfield_begin(flags);
#ifdef CONFIG_TCP_MD5SIG
struct tcp_md5sig_key *(*md5_lookup) (struct sock *sk,
struct request_sock *req);
+ int (*calc_md5_hash) (char *location,
+ struct tcp_md5sig_key *md5,
+ struct sock *sk,
+ struct request_sock *req,
+ struct sk_buff *skb);
#endif
};
#include "control.h"
#include "info.h"
+/* maximum number of devices on the AC97 bus */
+#define AC97_BUS_MAX_DEVICES 4
+
/*
* AC'97 codec registers
*/
/* ad hoc AC97 device driver access */
extern struct bus_type ac97_bus_type;
+/* AC97 platform_data adding function */
+static inline void snd_ac97_dev_add_pdata(struct snd_ac97 *ac97, void *data)
+{
+ ac97->dev.platform_data = data;
+}
+
#endif /* __SOUND_AC97_CODEC_H */
* *
*****************************************************************************/
-#define SNDRV_PCM_VERSION SNDRV_PROTOCOL_VERSION(2, 0, 9)
+#define SNDRV_PCM_VERSION SNDRV_PROTOCOL_VERSION(2, 0, 10)
typedef unsigned long snd_pcm_uframes_t;
typedef signed long snd_pcm_sframes_t;
#define snd_device(n) list_entry(n, struct snd_device, list)
-/* monitor files for graceful shutdown (hotplug) */
-
-struct snd_monitor_file {
- struct file *file;
- const struct file_operations *disconnected_f_op;
- struct list_head shutdown_list; /* still need to shutdown */
- struct list_head list; /* link of monitor files */
-};
-
/* main structure for soundcard */
struct snd_card {
int snd_card_file_add(struct snd_card *card, struct file *file);
int snd_card_file_remove(struct snd_card *card, struct file *file);
-#ifndef snd_card_set_dev
#define snd_card_set_dev(card, devptr) ((card)->dev = (devptr))
-#endif
/* device.c */
struct resource;
void release_and_free_resource(struct resource *res);
-#ifdef CONFIG_SND_VERBOSE_PRINTK
-void snd_verbose_printk(const char *file, int line, const char *format, ...)
- __attribute__ ((format (printf, 3, 4)));
-#endif
-#if defined(CONFIG_SND_DEBUG) && defined(CONFIG_SND_VERBOSE_PRINTK)
-void snd_verbose_printd(const char *file, int line, const char *format, ...)
- __attribute__ ((format (printf, 3, 4)));
-#endif
-
/* --- */
-#ifdef CONFIG_SND_VERBOSE_PRINTK
+#if defined(CONFIG_SND_DEBUG) || defined(CONFIG_SND_VERBOSE_PRINTK)
+void __snd_printk(unsigned int level, const char *file, int line,
+ const char *format, ...)
+ __attribute__ ((format (printf, 4, 5)));
+#else
+#define __snd_printk(level, file, line, format, args...) \
+ printk(format, ##args)
+#endif
+
/**
* snd_printk - printk wrapper
* @fmt: format string
* when configured with CONFIG_SND_VERBOSE_PRINTK.
*/
#define snd_printk(fmt, args...) \
- snd_verbose_printk(__FILE__, __LINE__, fmt ,##args)
-#else
-#define snd_printk(fmt, args...) \
- printk(fmt ,##args)
-#endif
+ __snd_printk(0, __FILE__, __LINE__, fmt, ##args)
#ifdef CONFIG_SND_DEBUG
-
-#ifdef CONFIG_SND_VERBOSE_PRINTK
/**
* snd_printd - debug printk
* @fmt: format string
* Ignored when CONFIG_SND_DEBUG is not set.
*/
#define snd_printd(fmt, args...) \
- snd_verbose_printd(__FILE__, __LINE__, fmt ,##args)
-#else
-#define snd_printd(fmt, args...) \
- printk(fmt ,##args)
-#endif
+ __snd_printk(1, __FILE__, __LINE__, fmt, ##args)
/**
* snd_BUG - give a BUG warning message and stack trace
* Works like snd_printk() for debugging purposes.
* Ignored when CONFIG_SND_DEBUG_VERBOSE is not set.
*/
-#define snd_printdd(format, args...) snd_printk(format, ##args)
+#define snd_printdd(format, args...) \
+ __snd_printk(2, __FILE__, __LINE__, format, ##args)
#else
-#define snd_printdd(format, args...) /* nothing */
+#define snd_printdd(format, args...) do { } while (0)
#endif
/* for easier backward-porting */
#if defined(CONFIG_GAMEPORT) || defined(CONFIG_GAMEPORT_MODULE)
-#ifndef gameport_set_dev_parent
#define gameport_set_dev_parent(gp,xdev) ((gp)->dev.parent = (xdev))
#define gameport_set_port_data(gp,r) ((gp)->port_data = (r))
#define gameport_get_port_data(gp) (gp)->port_data
#endif
-#endif
/* PCI quirk list helper */
struct snd_pci_quirk {
static inline void snd_card_info_read_oss(struct snd_info_buffer *buffer) {}
#endif
-int snd_iprintf(struct snd_info_buffer *buffer, char *fmt, ...) \
+int snd_iprintf(struct snd_info_buffer *buffer, const char *fmt, ...) \
__attribute__ ((format (printf, 2, 3)));
int snd_info_init(void);
int snd_info_done(void);
int snd_info_get_line(struct snd_info_buffer *buffer, char *line, int len);
-char *snd_info_get_str(char *dest, char *src, int len);
+const char *snd_info_get_str(char *dest, const char *src, int len);
struct snd_info_entry *snd_info_create_module_entry(struct module *module,
const char *name,
struct snd_info_entry *parent);
#define SNDRV_DMA_TYPE_UNKNOWN 0 /* not defined */
#define SNDRV_DMA_TYPE_CONTINUOUS 1 /* continuous no-DMA memory */
#define SNDRV_DMA_TYPE_DEV 2 /* generic device continuous */
+#ifdef CONFIG_SND_DMA_SGBUF
#define SNDRV_DMA_TYPE_DEV_SG 3 /* generic device SG-buffer */
+#else
+#define SNDRV_DMA_TYPE_DEV_SG SNDRV_DMA_TYPE_DEV /* no SG-buf support */
+#endif
/*
* info for buffer allocation
void *private_data; /* private for allocator; don't touch */
};
+#ifdef CONFIG_SND_DMA_SGBUF
/*
* Scatter-Gather generic device pages
*/
{
return sgbuf->table[offset >> PAGE_SHIFT].buf + offset % PAGE_SIZE;
}
+#endif /* CONFIG_SND_DMA_SGBUF */
/* allocate/release a buffer */
int snd_dma_alloc_pages(int type, struct device *dev, size_t size,
int snd_pcm_lib_malloc_pages(struct snd_pcm_substream *substream, size_t size);
int snd_pcm_lib_free_pages(struct snd_pcm_substream *substream);
+#ifdef CONFIG_SND_DMA_SGBUF
/*
* SG-buffer handling
*/
unsigned int snd_pcm_sgbuf_get_chunk_size(struct snd_pcm_substream *substream,
unsigned int ofs, unsigned int size);
+#else /* !SND_DMA_SGBUF */
+/*
+ * fake using a continuous buffer
+ */
+static inline dma_addr_t
+snd_pcm_sgbuf_get_addr(struct snd_pcm_substream *substream, unsigned int ofs)
+{
+ return substream->runtime->dma_addr + ofs;
+}
+
+static inline void *
+snd_pcm_sgbuf_get_ptr(struct snd_pcm_substream *substream, unsigned int ofs)
+{
+ return substream->runtime->dma_area + ofs;
+}
+
+#define snd_pcm_sgbuf_ops_page NULL
+
+#define snd_pcm_sgbuf_get_chunk_size(subs, ofs, size) (size)
+
+#endif /* SND_DMA_SGBUF */
+
/* handle mmap counter - PCM mmap callback should handle this counter properly */
static inline void snd_pcm_mmap_data_open(struct vm_area_struct *area)
{
#define PCM_RUNTIME_CHECK(sub) snd_BUG_ON(!(sub) || !(sub)->runtime)
+const char *snd_pcm_format_name(snd_pcm_format_t format);
+
#endif /* __SOUND_PCM_H */
--- /dev/null
+#ifndef __SOUND_FSI_H
+#define __SOUND_FSI_H
+
+/*
+ * Fifo-attached Serial Interface (FSI) support for SH7724
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* flags format
+
+ * 0xABCDEEFF
+ *
+ * A: channel size for TDM (input)
+ * B: channel size for TDM (ooutput)
+ * C: inversion
+ * D: mode
+ * E: input format
+ * F: output format
+ */
+
+#include <linux/clk.h>
+#include <sound/soc.h>
+
+/* TDM channel */
+#define SH_FSI_SET_CH_I(x) ((x & 0xF) << 28)
+#define SH_FSI_SET_CH_O(x) ((x & 0xF) << 24)
+
+#define SH_FSI_CH_IMASK 0xF0000000
+#define SH_FSI_CH_OMASK 0x0F000000
+#define SH_FSI_GET_CH_I(x) ((x & SH_FSI_CH_IMASK) >> 28)
+#define SH_FSI_GET_CH_O(x) ((x & SH_FSI_CH_OMASK) >> 24)
+
+/* clock inversion */
+#define SH_FSI_INVERSION_MASK 0x00F00000
+#define SH_FSI_LRM_INV (1 << 20)
+#define SH_FSI_BRM_INV (1 << 21)
+#define SH_FSI_LRS_INV (1 << 22)
+#define SH_FSI_BRS_INV (1 << 23)
+
+/* mode */
+#define SH_FSI_MODE_MASK 0x000F0000
+#define SH_FSI_IN_SLAVE_MODE (1 << 16) /* default master mode */
+#define SH_FSI_OUT_SLAVE_MODE (1 << 17) /* default master mode */
+
+/* DI format */
+#define SH_FSI_FMT_MASK 0x000000FF
+#define SH_FSI_IFMT(x) (((SH_FSI_FMT_ ## x) & SH_FSI_FMT_MASK) << 8)
+#define SH_FSI_OFMT(x) (((SH_FSI_FMT_ ## x) & SH_FSI_FMT_MASK) << 0)
+#define SH_FSI_GET_IFMT(x) ((x >> 8) & SH_FSI_FMT_MASK)
+#define SH_FSI_GET_OFMT(x) ((x >> 0) & SH_FSI_FMT_MASK)
+
+#define SH_FSI_FMT_MONO (1 << 0)
+#define SH_FSI_FMT_MONO_DELAY (1 << 1)
+#define SH_FSI_FMT_PCM (1 << 2)
+#define SH_FSI_FMT_I2S (1 << 3)
+#define SH_FSI_FMT_TDM (1 << 4)
+#define SH_FSI_FMT_TDM_DELAY (1 << 5)
+
+#define SH_FSI_IFMT_TDM_CH(x) \
+ (SH_FSI_IFMT(TDM) | SH_FSI_SET_CH_I(x))
+#define SH_FSI_IFMT_TDM_DELAY_CH(x) \
+ (SH_FSI_IFMT(TDM_DELAY) | SH_FSI_SET_CH_I(x))
+
+#define SH_FSI_OFMT_TDM_CH(x) \
+ (SH_FSI_OFMT(TDM) | SH_FSI_SET_CH_O(x))
+#define SH_FSI_OFMT_TDM_DELAY_CH(x) \
+ (SH_FSI_OFMT(TDM_DELAY) | SH_FSI_SET_CH_O(x))
+
+struct sh_fsi_platform_info {
+ unsigned long porta_flags;
+ unsigned long portb_flags;
+};
+
+extern struct snd_soc_dai fsi_soc_dai[2];
+extern struct snd_soc_platform fsi_soc_platform;
+
+#endif /* __SOUND_FSI_H */
#define SND_SOC_DAIFMT_I2S 0 /* I2S mode */
#define SND_SOC_DAIFMT_RIGHT_J 1 /* Right Justified mode */
#define SND_SOC_DAIFMT_LEFT_J 2 /* Left Justified mode */
-#define SND_SOC_DAIFMT_DSP_A 3 /* L data msb after FRM LRC */
-#define SND_SOC_DAIFMT_DSP_B 4 /* L data msb during FRM LRC */
+#define SND_SOC_DAIFMT_DSP_A 3 /* L data MSB after FRM LRC */
+#define SND_SOC_DAIFMT_DSP_B 4 /* L data MSB during FRM LRC */
#define SND_SOC_DAIFMT_AC97 5 /* AC97 */
/* left and right justified also known as MSB and LSB respectively */
/*
* DAI Clock gating.
*
- * DAI bit clocks can be be gated (disabled) when not the DAI is not
+ * DAI bit clocks can be be gated (disabled) when the DAI is not
* sending or receiving PCM data in a frame. This can be used to save power.
*/
#define SND_SOC_DAIFMT_CONT (0 << 4) /* continuous clock */
* format.
*/
#define SND_SOC_DAIFMT_NB_NF (0 << 8) /* normal bit clock + frame */
-#define SND_SOC_DAIFMT_NB_IF (1 << 8) /* normal bclk + inv frm */
-#define SND_SOC_DAIFMT_IB_NF (2 << 8) /* invert bclk + nor frm */
-#define SND_SOC_DAIFMT_IB_IF (3 << 8) /* invert bclk + frm */
+#define SND_SOC_DAIFMT_NB_IF (1 << 8) /* normal BCLK + inv FRM */
+#define SND_SOC_DAIFMT_IB_NF (2 << 8) /* invert BCLK + nor FRM */
+#define SND_SOC_DAIFMT_IB_IF (3 << 8) /* invert BCLK + FRM */
/*
* DAI hardware clock masters.
*
* This is wrt the codec, the inverse is true for the interface
- * i.e. if the codec is clk and frm master then the interface is
+ * i.e. if the codec is clk and FRM master then the interface is
* clk and frame slave.
*/
-#define SND_SOC_DAIFMT_CBM_CFM (0 << 12) /* codec clk & frm master */
-#define SND_SOC_DAIFMT_CBS_CFM (1 << 12) /* codec clk slave & frm master */
+#define SND_SOC_DAIFMT_CBM_CFM (0 << 12) /* codec clk & FRM master */
+#define SND_SOC_DAIFMT_CBS_CFM (1 << 12) /* codec clk slave & FRM master */
#define SND_SOC_DAIFMT_CBM_CFS (2 << 12) /* codec clk master & frame slave */
-#define SND_SOC_DAIFMT_CBS_CFS (3 << 12) /* codec clk & frm slave */
+#define SND_SOC_DAIFMT_CBS_CFS (3 << 12) /* codec clk & FRM slave */
#define SND_SOC_DAIFMT_FORMAT_MASK 0x000f
#define SND_SOC_DAIFMT_CLOCK_MASK 0x00f0
#define SND_SOC_CLOCK_IN 0
#define SND_SOC_CLOCK_OUT 1
-#define SND_SOC_STD_AC97_FMTS (SNDRV_PCM_FMTBIT_S16_LE |\
+#define SND_SOC_STD_AC97_FMTS (SNDRV_PCM_FMTBIT_S8 |\
+ SNDRV_PCM_FMTBIT_S16_LE |\
+ SNDRV_PCM_FMTBIT_S16_BE |\
+ SNDRV_PCM_FMTBIT_S20_3LE |\
+ SNDRV_PCM_FMTBIT_S20_3BE |\
+ SNDRV_PCM_FMTBIT_S24_3LE |\
+ SNDRV_PCM_FMTBIT_S24_3BE |\
SNDRV_PCM_FMTBIT_S32_LE |\
SNDRV_PCM_FMTBIT_S32_BE)
int snd_soc_dai_set_fmt(struct snd_soc_dai *dai, unsigned int fmt);
int snd_soc_dai_set_tdm_slot(struct snd_soc_dai *dai,
- unsigned int mask, int slots);
+ unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width);
int snd_soc_dai_set_tristate(struct snd_soc_dai *dai, int tristate);
/*
* Digital Audio Interface.
*
- * Describes the Digital Audio Interface in terms of it's ALSA, DAI and AC97
- * operations an capabilities. Codec and platfom drivers will register a this
+ * Describes the Digital Audio Interface in terms of its ALSA, DAI and AC97
+ * operations and capabilities. Codec and platform drivers will register this
* structure for every DAI they have.
*
* This structure covers the clocking, formating and ALSA operations for each
- * interface a
+ * interface.
*/
struct snd_soc_dai_ops {
/*
*/
int (*set_fmt)(struct snd_soc_dai *dai, unsigned int fmt);
int (*set_tdm_slot)(struct snd_soc_dai *dai,
- unsigned int mask, int slots);
+ unsigned int tx_mask, unsigned int rx_mask,
+ int slots, int slot_width);
int (*set_tristate)(struct snd_soc_dai *dai, int tristate);
/*
int ac97_control;
struct device *dev;
+ void *ac97_pdata; /* platform_data for the ac97 codec */
/* DAI callbacks */
int (*probe)(struct platform_device *pdev,
.event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD}
/* stream domain */
+#define SND_SOC_DAPM_AIF_IN(wname, stname, wslot, wreg, wshift, winvert) \
+{ .id = snd_soc_dapm_aif_in, .name = wname, .sname = stname, \
+ .reg = wreg, .shift = wshift, .invert = winvert }
+#define SND_SOC_DAPM_AIF_OUT(wname, stname, wslot, wreg, wshift, winvert) \
+{ .id = snd_soc_dapm_aif_out, .name = wname, .sname = stname, \
+ .reg = wreg, .shift = wshift, .invert = winvert }
#define SND_SOC_DAPM_DAC(wname, stname, wreg, wshift, winvert) \
{ .id = snd_soc_dapm_dac, .name = wname, .sname = stname, .reg = wreg, \
.shift = wshift, .invert = winvert}
/* dapm events */
int snd_soc_dapm_stream_event(struct snd_soc_codec *codec, char *stream,
int event);
+void snd_soc_dapm_shutdown(struct snd_soc_device *socdev);
/* dapm sys fs - used by the core */
int snd_soc_dapm_sys_add(struct device *dev);
+void snd_soc_dapm_debugfs_init(struct snd_soc_codec *codec);
/* dapm audio pin control and status */
int snd_soc_dapm_enable_pin(struct snd_soc_codec *codec, const char *pin);
snd_soc_dapm_pre, /* machine specific pre widget - exec first */
snd_soc_dapm_post, /* machine specific post widget - exec last */
snd_soc_dapm_supply, /* power/clock supply */
+ snd_soc_dapm_aif_in, /* audio interface input */
+ snd_soc_dapm_aif_out, /* audio interface output */
};
/*
.info = snd_soc_info_volsw, \
.get = xhandler_get, .put = xhandler_put, \
.private_value = SOC_SINGLE_VALUE(xreg, xshift, xmax, xinvert) }
+#define SOC_DOUBLE_EXT_TLV(xname, xreg, shift_left, shift_right, xmax, xinvert,\
+ xhandler_get, xhandler_put, tlv_array) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
+ .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
+ SNDRV_CTL_ELEM_ACCESS_READWRITE, \
+ .tlv.p = (tlv_array), \
+ .info = snd_soc_info_volsw, \
+ .get = xhandler_get, .put = xhandler_put, \
+ .private_value = (unsigned long)&(struct soc_mixer_control) \
+ {.reg = xreg, .shift = shift_left, .rshift = shift_right, \
+ .max = xmax, .invert = xinvert} }
+#define SOC_DOUBLE_R_EXT_TLV(xname, reg_left, reg_right, xshift, xmax, xinvert,\
+ xhandler_get, xhandler_put, tlv_array) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
+ .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
+ SNDRV_CTL_ELEM_ACCESS_READWRITE, \
+ .tlv.p = (tlv_array), \
+ .info = snd_soc_info_volsw_2r, \
+ .get = xhandler_get, .put = xhandler_put, \
+ .private_value = (unsigned long)&(struct soc_mixer_control) \
+ {.reg = reg_left, .rreg = reg_right, .shift = xshift, \
+ .max = xmax, .invert = xinvert} }
#define SOC_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
.info = snd_soc_info_bool_ext, \
#endif
typedef int (*hw_write_t)(void *,const char* ,int);
-typedef int (*hw_read_t)(void *,char* ,int);
extern struct snd_ac97_bus_ops soc_ac97_ops;
+enum snd_soc_control_type {
+ SND_SOC_CUSTOM,
+ SND_SOC_I2C,
+ SND_SOC_SPI,
+};
+
int snd_soc_register_platform(struct snd_soc_platform *platform);
void snd_soc_unregister_platform(struct snd_soc_platform *platform);
int snd_soc_register_codec(struct snd_soc_codec *codec);
void snd_soc_unregister_codec(struct snd_soc_codec *codec);
+int snd_soc_codec_volatile_register(struct snd_soc_codec *codec, int reg);
+int snd_soc_codec_set_cache_io(struct snd_soc_codec *codec,
+ int addr_bits, int data_bits,
+ enum snd_soc_control_type control);
+
+#ifdef CONFIG_PM
+int snd_soc_suspend_device(struct device *dev);
+int snd_soc_resume_device(struct device *dev);
+#endif
/* pcm <-> DAI connect */
void snd_soc_free_pcms(struct snd_soc_device *socdev);
/* codec register bit access */
int snd_soc_update_bits(struct snd_soc_codec *codec, unsigned short reg,
- unsigned short mask, unsigned short value);
+ unsigned int mask, unsigned int value);
int snd_soc_test_bits(struct snd_soc_codec *codec, unsigned short reg,
- unsigned short mask, unsigned short value);
+ unsigned int mask, unsigned int value);
int snd_soc_new_ac97_codec(struct snd_soc_codec *codec,
struct snd_ac97_bus_ops *ops, int num);
int (*write)(struct snd_soc_codec *, unsigned int, unsigned int);
int (*display_register)(struct snd_soc_codec *, char *,
size_t, unsigned int);
+ int (*volatile_register)(unsigned int);
+ int (*readable_register)(unsigned int);
hw_write_t hw_write;
- hw_read_t hw_read;
+ unsigned int (*hw_read)(struct snd_soc_codec *, unsigned int);
void *reg_cache;
short reg_cache_size;
short reg_cache_step;
enum snd_soc_bias_level bias_level;
enum snd_soc_bias_level suspend_bias_level;
struct delayed_work delayed_work;
- struct list_head up_list;
- struct list_head down_list;
/* codec DAI's */
struct snd_soc_dai *dai;
#ifdef CONFIG_DEBUG_FS
struct dentry *debugfs_reg;
struct dentry *debugfs_pop_time;
+ struct dentry *debugfs_dapm;
#endif
};
#define SNDRV_CTL_TLVT_DB_SCALE 1 /* dB scale */
#define SNDRV_CTL_TLVT_DB_LINEAR 2 /* linear volume */
#define SNDRV_CTL_TLVT_DB_RANGE 3 /* dB range container */
+#define SNDRV_CTL_TLVT_DB_MINMAX 4 /* dB scale with min/max */
+#define SNDRV_CTL_TLVT_DB_MINMAX_MUTE 5 /* dB scale with min/max with mute */
#define TLV_DB_SCALE_ITEM(min, step, mute) \
SNDRV_CTL_TLVT_DB_SCALE, 2 * sizeof(unsigned int), \
#define DECLARE_TLV_DB_SCALE(name, min, step, mute) \
unsigned int name[] = { TLV_DB_SCALE_ITEM(min, step, mute) }
+/* dB scale specified with min/max values instead of step */
+#define TLV_DB_MINMAX_ITEM(min_dB, max_dB) \
+ SNDRV_CTL_TLVT_DB_MINMAX, 2 * sizeof(unsigned int), \
+ (min_dB), (max_dB)
+#define TLV_DB_MINMAX_MUTE_ITEM(min_dB, max_dB) \
+ SNDRV_CTL_TLVT_DB_MINMAX_MUTE, 2 * sizeof(unsigned int), \
+ (min_dB), (max_dB)
+#define DECLARE_TLV_DB_MINMAX(name, min_dB, max_dB) \
+ unsigned int name[] = { TLV_DB_MINMAX_ITEM(min_dB, max_dB) }
+#define DECLARE_TLV_DB_MINMAX_MUTE(name, min_dB, max_dB) \
+ unsigned int name[] = { TLV_DB_MINMAX_MUTE_ITEM(min_dB, max_dB) }
+
/* linear volume between min_dB and max_dB (.01dB unit) */
#define TLV_DB_LINEAR_ITEM(min_dB, max_dB) \
SNDRV_CTL_TLVT_DB_LINEAR, 2 * sizeof(unsigned int), \
--- /dev/null
+/*
+ * UDA1380 ALSA SoC Codec driver
+ *
+ * Copyright 2009 Philipp Zabel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __UDA1380_H
+#define __UDA1380_H
+
+struct uda1380_platform_data {
+ int gpio_power;
+ int gpio_reset;
+ int dac_clk;
+#define UDA1380_DAC_CLK_SYSCLK 0
+#define UDA1380_DAC_CLK_WSPLL 1
+};
+
+#endif /* __UDA1380_H */
/* include/version.h */
-#define CONFIG_SND_VERSION "1.0.20"
+#define CONFIG_SND_VERSION "1.0.21"
#define CONFIG_SND_DATE ""
--- /dev/null
+/*
+ * linux/sound/wm8993.h -- Platform data for WM8993
+ *
+ * Copyright 2009 Wolfson Microelectronics. PLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_SND_WM8993_H
+#define __LINUX_SND_WM8993_H
+
+/* Note that EQ1 only contains the enable/disable bit so will be
+ ignored but is included for simplicity.
+ */
+struct wm8993_retune_mobile_setting {
+ const char *name;
+ unsigned int rate;
+ u16 config[24];
+};
+
+struct wm8993_platform_data {
+ struct wm8993_retune_mobile_setting *retune_configs;
+ int num_retune_configs;
+
+ /* LINEOUT can be differential or single ended */
+ unsigned int lineout1_diff:1;
+ unsigned int lineout2_diff:1;
+
+ /* Common mode feedback */
+ unsigned int lineout1fb:1;
+ unsigned int lineout2fb:1;
+
+ /* Microphone biases: 0=0.9*AVDD1 1=0.65*AVVD1 */
+ unsigned int micbias1_lvl:1;
+ unsigned int micbias2_lvl:1;
+
+ /* Jack detect threashold levels, see datasheet for values */
+ unsigned int jd_scthr:2;
+ unsigned int jd_thr:2;
+};
+
+#endif
struct snd_ac97 *ac97;
struct snd_rawmidi *rawmidi;
struct snd_timer *timer;
+ unsigned int timer_ticks;
struct pci_dev *pci;
struct snd_card *card;
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM block
+
#if !defined(_TRACE_BLOCK_H) || defined(TRACE_HEADER_MULTI_READ)
#define _TRACE_BLOCK_H
#include <linux/blkdev.h>
#include <linux/tracepoint.h>
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM block
-
TRACE_EVENT(block_rq_abort,
TP_PROTO(struct request_queue *q, struct request *rq),
-#if !defined(_TRACE_EXT4_H) || defined(TRACE_HEADER_MULTI_READ)
-#define _TRACE_EXT4_H
-
#undef TRACE_SYSTEM
#define TRACE_SYSTEM ext4
+#if !defined(_TRACE_EXT4_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_EXT4_H
+
#include <linux/writeback.h>
#include "../../../fs/ext4/ext4.h"
#include "../../../fs/ext4/mballoc.h"
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM irq
+
#if !defined(_TRACE_IRQ_H) || defined(TRACE_HEADER_MULTI_READ)
#define _TRACE_IRQ_H
#include <linux/tracepoint.h>
#include <linux/interrupt.h>
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM irq
-
#define softirq_name(sirq) { sirq##_SOFTIRQ, #sirq }
#define show_softirq_name(val) \
__print_symbolic(val, \
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM jbd2
+
#if !defined(_TRACE_JBD2_H) || defined(TRACE_HEADER_MULTI_READ)
#define _TRACE_JBD2_H
#include <linux/jbd2.h>
#include <linux/tracepoint.h>
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM jbd2
-
TRACE_EVENT(jbd2_checkpoint,
TP_PROTO(journal_t *journal, int result),
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM kmem
+
#if !defined(_TRACE_KMEM_H) || defined(TRACE_HEADER_MULTI_READ)
#define _TRACE_KMEM_H
#include <linux/types.h>
#include <linux/tracepoint.h>
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM kmem
-
/*
* The order of these masks is important. Matching masks will be seen
* first and the left over flags will end up showing by themselves.
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM lockdep
+
#if !defined(_TRACE_LOCKDEP_H) || defined(TRACE_HEADER_MULTI_READ)
#define _TRACE_LOCKDEP_H
#include <linux/lockdep.h>
#include <linux/tracepoint.h>
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM lockdep
-
#ifdef CONFIG_LOCKDEP
TRACE_EVENT(lock_acquire,
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM sched
+
#if !defined(_TRACE_SCHED_H) || defined(TRACE_HEADER_MULTI_READ)
#define _TRACE_SCHED_H
#include <linux/sched.h>
#include <linux/tracepoint.h>
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM sched
-
/*
* Tracepoint for calling kthread_stop, performed to end a kthread:
*/
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM skb
+
#if !defined(_TRACE_SKB_H) || defined(TRACE_HEADER_MULTI_READ)
#define _TRACE_SKB_H
#include <linux/skbuff.h>
#include <linux/tracepoint.h>
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM skb
-
/*
* Tracepoint for free an sk_buff:
*/
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM workqueue
+
#if !defined(_TRACE_WORKQUEUE_H) || defined(TRACE_HEADER_MULTI_READ)
#define _TRACE_WORKQUEUE_H
#include <linux/sched.h>
#include <linux/tracepoint.h>
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM workqueue
-
TRACE_EVENT(workqueue_insertion,
TP_PROTO(struct task_struct *wq_thread, struct work_struct *work),
#undef TP_fast_assign
#define TP_fast_assign(args...) args
+#undef TP_perf_assign
+#define TP_perf_assign(args...)
+
#undef TRACE_EVENT
#define TRACE_EVENT(call, proto, args, tstruct, func, print) \
static int \
#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
+#ifdef CONFIG_EVENT_PROFILE
+
+/*
+ * Generate the functions needed for tracepoint perf_counter support.
+ *
+ * NOTE: The insertion profile callback (ftrace_profile_<call>) is defined later
+ *
+ * static int ftrace_profile_enable_<call>(struct ftrace_event_call *event_call)
+ * {
+ * int ret = 0;
+ *
+ * if (!atomic_inc_return(&event_call->profile_count))
+ * ret = register_trace_<call>(ftrace_profile_<call>);
+ *
+ * return ret;
+ * }
+ *
+ * static void ftrace_profile_disable_<call>(struct ftrace_event_call *event_call)
+ * {
+ * if (atomic_add_negative(-1, &event->call->profile_count))
+ * unregister_trace_<call>(ftrace_profile_<call>);
+ * }
+ *
+ */
+
+#undef TRACE_EVENT
+#define TRACE_EVENT(call, proto, args, tstruct, assign, print) \
+ \
+static void ftrace_profile_##call(proto); \
+ \
+static int ftrace_profile_enable_##call(struct ftrace_event_call *event_call) \
+{ \
+ int ret = 0; \
+ \
+ if (!atomic_inc_return(&event_call->profile_count)) \
+ ret = register_trace_##call(ftrace_profile_##call); \
+ \
+ return ret; \
+} \
+ \
+static void ftrace_profile_disable_##call(struct ftrace_event_call *event_call)\
+{ \
+ if (atomic_add_negative(-1, &event_call->profile_count)) \
+ unregister_trace_##call(ftrace_profile_##call); \
+}
+
+#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
+
+#endif
+
/*
* Stage 4 of the trace events.
*
#define TP_FMT(fmt, args...) fmt "\n", ##args
#ifdef CONFIG_EVENT_PROFILE
-#define _TRACE_PROFILE(call, proto, args) \
-static void ftrace_profile_##call(proto) \
-{ \
- extern void perf_tpcounter_event(int); \
- perf_tpcounter_event(event_##call.id); \
-} \
- \
-static int ftrace_profile_enable_##call(struct ftrace_event_call *event_call) \
-{ \
- int ret = 0; \
- \
- if (!atomic_inc_return(&event_call->profile_count)) \
- ret = register_trace_##call(ftrace_profile_##call); \
- \
- return ret; \
-} \
- \
-static void ftrace_profile_disable_##call(struct ftrace_event_call *event_call)\
-{ \
- if (atomic_add_negative(-1, &event_call->profile_count)) \
- unregister_trace_##call(ftrace_profile_##call); \
-}
#define _TRACE_PROFILE_INIT(call) \
.profile_count = ATOMIC_INIT(-1), \
.profile_disable = ftrace_profile_disable_##call,
#else
-#define _TRACE_PROFILE(call, proto, args)
#define _TRACE_PROFILE_INIT(call)
#endif
#undef TRACE_EVENT
#define TRACE_EVENT(call, proto, args, tstruct, assign, print) \
-_TRACE_PROFILE(call, PARAMS(proto), PARAMS(args)) \
\
static struct ftrace_event_call event_##call; \
\
#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
-#undef _TRACE_PROFILE
+/*
+ * Define the insertion callback to profile events
+ *
+ * The job is very similar to ftrace_raw_event_<call> except that we don't
+ * insert in the ring buffer but in a perf counter.
+ *
+ * static void ftrace_profile_<call>(proto)
+ * {
+ * struct ftrace_data_offsets_<call> __maybe_unused __data_offsets;
+ * struct ftrace_event_call *event_call = &event_<call>;
+ * extern void perf_tpcounter_event(int, u64, u64, void *, int);
+ * struct ftrace_raw_##call *entry;
+ * u64 __addr = 0, __count = 1;
+ * unsigned long irq_flags;
+ * int __entry_size;
+ * int __data_size;
+ * int pc;
+ *
+ * local_save_flags(irq_flags);
+ * pc = preempt_count();
+ *
+ * __data_size = ftrace_get_offsets_<call>(&__data_offsets, args);
+ *
+ * // Below we want to get the aligned size by taking into account
+ * // the u32 field that will later store the buffer size
+ * __entry_size = ALIGN(__data_size + sizeof(*entry) + sizeof(u32),
+ * sizeof(u64));
+ * __entry_size -= sizeof(u32);
+ *
+ * do {
+ * char raw_data[__entry_size]; <- allocate our sample in the stack
+ * struct trace_entry *ent;
+ *
+ * zero dead bytes from alignment to avoid stack leak to userspace:
+ *
+ * *(u64 *)(&raw_data[__entry_size - sizeof(u64)]) = 0ULL;
+ * entry = (struct ftrace_raw_<call> *)raw_data;
+ * ent = &entry->ent;
+ * tracing_generic_entry_update(ent, irq_flags, pc);
+ * ent->type = event_call->id;
+ *
+ * <tstruct> <- do some jobs with dynamic arrays
+ *
+ * <assign> <- affect our values
+ *
+ * perf_tpcounter_event(event_call->id, __addr, __count, entry,
+ * __entry_size); <- submit them to perf counter
+ * } while (0);
+ *
+ * }
+ */
+
+#ifdef CONFIG_EVENT_PROFILE
+
+#undef __perf_addr
+#define __perf_addr(a) __addr = (a)
+
+#undef __perf_count
+#define __perf_count(c) __count = (c)
+
+#undef TRACE_EVENT
+#define TRACE_EVENT(call, proto, args, tstruct, assign, print) \
+static void ftrace_profile_##call(proto) \
+{ \
+ struct ftrace_data_offsets_##call __maybe_unused __data_offsets;\
+ struct ftrace_event_call *event_call = &event_##call; \
+ extern void perf_tpcounter_event(int, u64, u64, void *, int); \
+ struct ftrace_raw_##call *entry; \
+ u64 __addr = 0, __count = 1; \
+ unsigned long irq_flags; \
+ int __entry_size; \
+ int __data_size; \
+ int pc; \
+ \
+ local_save_flags(irq_flags); \
+ pc = preempt_count(); \
+ \
+ __data_size = ftrace_get_offsets_##call(&__data_offsets, args); \
+ __entry_size = ALIGN(__data_size + sizeof(*entry) + sizeof(u32),\
+ sizeof(u64)); \
+ __entry_size -= sizeof(u32); \
+ \
+ do { \
+ char raw_data[__entry_size]; \
+ struct trace_entry *ent; \
+ \
+ *(u64 *)(&raw_data[__entry_size - sizeof(u64)]) = 0ULL; \
+ entry = (struct ftrace_raw_##call *)raw_data; \
+ ent = &entry->ent; \
+ tracing_generic_entry_update(ent, irq_flags, pc); \
+ ent->type = event_call->id; \
+ \
+ tstruct \
+ \
+ { assign; } \
+ \
+ perf_tpcounter_event(event_call->id, __addr, __count, entry,\
+ __entry_size); \
+ } while (0); \
+ \
+}
+
+#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
+#endif /* CONFIG_EVENT_PROFILE */
+
#undef _TRACE_PROFILE_INIT
prompt "RCU Implementation"
default TREE_RCU
-config CLASSIC_RCU
- bool "Classic RCU"
- help
- This option selects the classic RCU implementation that is
- designed for best read-side performance on non-realtime
- systems.
-
- Select this option if you are unsure.
-
config TREE_RCU
bool "Tree-based hierarchical RCU"
help
This option selects the RCU implementation that is
designed for very large SMP system with hundreds or
- thousands of CPUs.
+ thousands of CPUs. It also scales down nicely to
+ smaller systems.
-config PREEMPT_RCU
- bool "Preemptible RCU"
+config TREE_PREEMPT_RCU
+ bool "Preemptable tree-based hierarchical RCU"
depends on PREEMPT
help
- This option reduces the latency of the kernel by making certain
- RCU sections preemptible. Normally RCU code is non-preemptible, if
- this option is selected then read-only RCU sections become
- preemptible. This helps latency, but may expose bugs due to
- now-naive assumptions about each RCU read-side critical section
- remaining on a given CPU through its execution.
+ This option selects the RCU implementation that is
+ designed for very large SMP systems with hundreds or
+ thousands of CPUs, but for which real-time response
+ is also required.
endchoice
config RCU_TRACE
bool "Enable tracing for RCU"
- depends on TREE_RCU || PREEMPT_RCU
+ depends on TREE_RCU || TREE_PREEMPT_RCU
help
This option provides tracing in RCU which presents stats
in debugfs for debugging RCU implementation.
int "Tree-based hierarchical RCU fanout value"
range 2 64 if 64BIT
range 2 32 if !64BIT
- depends on TREE_RCU
+ depends on TREE_RCU || TREE_PREEMPT_RCU
default 64 if 64BIT
default 32 if !64BIT
help
config RCU_FANOUT_EXACT
bool "Disable tree-based hierarchical RCU auto-balancing"
- depends on TREE_RCU
+ depends on TREE_RCU || TREE_PREEMPT_RCU
default n
help
This option forces use of the exact RCU_FANOUT value specified,
Say N if unsure.
config TREE_RCU_TRACE
- def_bool RCU_TRACE && TREE_RCU
+ def_bool RCU_TRACE && ( TREE_RCU || TREE_PREEMPT_RCU )
select DEBUG_FS
help
- This option provides tracing for the TREE_RCU implementation,
- permitting Makefile to trivially select kernel/rcutree_trace.c.
-
-config PREEMPT_RCU_TRACE
- def_bool RCU_TRACE && PREEMPT_RCU
- select DEBUG_FS
- help
- This option provides tracing for the PREEMPT_RCU implementation,
- permitting Makefile to trivially select kernel/rcupreempt_trace.c.
+ This option provides tracing for the TREE_RCU and
+ TREE_PREEMPT_RCU implementations, permitting Makefile to
+ trivially select kernel/rcutree_trace.c.
endmenu # "RCU Subsystem"
config PERF_COUNTERS
bool "Kernel Performance Counters"
+ default y if PROFILING
depends on HAVE_PERF_COUNTERS
select ANON_INODES
help
Say Y if unsure.
config EVENT_PROFILE
- bool "Tracepoint profile sources"
- depends on PERF_COUNTERS && EVENT_TRACER
+ bool "Tracepoint profiling sources"
+ depends on PERF_COUNTERS && EVENT_TRACING
default y
+ help
+ Allow the use of tracepoints as software performance counters.
+
+ When this is enabled, you can create perf counters based on
+ tracepoints using PERF_TYPE_TRACEPOINT and the tracepoint ID
+ found in debugfs://tracing/events/*/*/id. (The -e/--events
+ option to the perf tool can parse and interpret symbolic
+ tracepoints, in the subsystem:tracepoint_name format.)
endmenu
{
int pid;
+ rcu_scheduler_starting();
kernel_thread(kernel_init, NULL, CLONE_FS | CLONE_SIGHAND);
numa_default_policy();
pid = kernel_thread(kthreadd, NULL, CLONE_FS | CLONE_FILES);
* at least once to get things moving:
*/
init_idle_bootup_task(current);
- rcu_scheduler_starting();
preempt_enable_no_resched();
schedule();
preempt_disable();
setup_arch(&command_line);
mm_init_owner(&init_mm, &init_task);
setup_command_line(command_line);
- setup_per_cpu_areas();
setup_nr_cpu_ids();
+ setup_per_cpu_areas();
smp_prepare_boot_cpu(); /* arch-specific boot-cpu hooks */
build_all_zonelists();
int initcall_debug;
core_param(initcall_debug, initcall_debug, bool, 0644);
+static char msgbuf[64];
+static struct boot_trace_call call;
+static struct boot_trace_ret ret;
+
int do_one_initcall(initcall_t fn)
{
int count = preempt_count();
ktime_t calltime, delta, rettime;
- char msgbuf[64];
- struct boot_trace_call call;
- struct boot_trace_ret ret;
if (initcall_debug) {
call.caller = task_pid_nr(current);
shm_unlock(shp);
if (!is_file_hugepages(shp->shm_file))
shmem_lock(shp->shm_file, 0, shp->mlock_user);
- else
+ else if (shp->mlock_user)
user_shm_unlock(shp->shm_file->f_path.dentry->d_inode->i_size,
shp->mlock_user);
fput (shp->shm_file);
/* hugetlb_file_setup applies strict accounting */
if (shmflg & SHM_NORESERVE)
acctflag = VM_NORESERVE;
- file = hugetlb_file_setup(name, size, acctflag);
- shp->mlock_user = current_user();
+ file = hugetlb_file_setup(name, size, acctflag,
+ &shp->mlock_user);
} else {
/*
* Do not allow no accounting for OVERCOMMIT_NEVER, even
return error;
no_id:
+ if (shp->mlock_user) /* shmflg & SHM_HUGETLB case */
+ user_shm_unlock(size, shp->mlock_user);
fput(file);
no_file:
security_shm_free(shp);
obj-$(CONFIG_GENERIC_HARDIRQS) += irq/
obj-$(CONFIG_SECCOMP) += seccomp.o
obj-$(CONFIG_RCU_TORTURE_TEST) += rcutorture.o
-obj-$(CONFIG_CLASSIC_RCU) += rcuclassic.o
obj-$(CONFIG_TREE_RCU) += rcutree.o
-obj-$(CONFIG_PREEMPT_RCU) += rcupreempt.o
+obj-$(CONFIG_TREE_PREEMPT_RCU) += rcutree.o
obj-$(CONFIG_TREE_RCU_TRACE) += rcutree_trace.o
-obj-$(CONFIG_PREEMPT_RCU_TRACE) += rcupreempt_trace.o
obj-$(CONFIG_RELAY) += relay.o
obj-$(CONFIG_SYSCTL) += utsname_sysctl.o
obj-$(CONFIG_TASK_DELAY_ACCT) += delayacct.o
u64 run_time;
struct timespec uptime;
struct tty_struct *tty;
+ const struct cred *orig_cred;
+
+ /* Perform file operations on behalf of whoever enabled accounting */
+ orig_cred = override_creds(file->f_cred);
/*
* First check to see if there is enough free_space to continue
* the process accounting system.
*/
if (!check_free_space(acct, file))
- return;
+ goto out;
/*
* Fill the accounting struct with the needed info as recorded
sizeof(acct_t), &file->f_pos);
current->signal->rlim[RLIMIT_FSIZE].rlim_cur = flim;
set_fs(fs);
+out:
+ revert_creds(orig_cred);
}
/**
#include <linux/hash.h>
#include <linux/namei.h>
#include <linux/smp_lock.h>
+#include <linux/pid_namespace.h>
#include <asm/atomic.h>
static struct file_operations proc_cgroupstats_operations;
static struct backing_dev_info cgroup_backing_dev_info = {
+ .name = "cgroup",
.capabilities = BDI_CAP_NO_ACCT_AND_WRITEBACK,
};
* reference to css->refcnt. In general, this refcnt is expected to goes down
* to zero, soon.
*
- * CGRP_WAIT_ON_RMDIR flag is modified under cgroup's inode->i_mutex;
+ * CGRP_WAIT_ON_RMDIR flag is set under cgroup's inode->i_mutex;
*/
DECLARE_WAIT_QUEUE_HEAD(cgroup_rmdir_waitq);
-static void cgroup_wakeup_rmdir_waiters(const struct cgroup *cgrp)
+static void cgroup_wakeup_rmdir_waiter(struct cgroup *cgrp)
{
- if (unlikely(test_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags)))
+ if (unlikely(test_and_clear_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags)))
wake_up_all(&cgroup_rmdir_waitq);
}
+void cgroup_exclude_rmdir(struct cgroup_subsys_state *css)
+{
+ css_get(css);
+}
+
+void cgroup_release_and_wakeup_rmdir(struct cgroup_subsys_state *css)
+{
+ cgroup_wakeup_rmdir_waiter(css->cgroup);
+ css_put(css);
+}
+
+
static int rebind_subsystems(struct cgroupfs_root *root,
unsigned long final_bits)
{
INIT_LIST_HEAD(&cgrp->children);
INIT_LIST_HEAD(&cgrp->css_sets);
INIT_LIST_HEAD(&cgrp->release_list);
+ INIT_LIST_HEAD(&cgrp->pids_list);
init_rwsem(&cgrp->pids_mutex);
}
static void init_cgroup_root(struct cgroupfs_root *root)
* wake up rmdir() waiter. the rmdir should fail since the cgroup
* is no longer empty.
*/
- cgroup_wakeup_rmdir_waiters(cgrp);
+ cgroup_wakeup_rmdir_waiter(cgrp);
return 0;
}
return ret;
}
+/*
+ * Cache pids for all threads in the same pid namespace that are
+ * opening the same "tasks" file.
+ */
+struct cgroup_pids {
+ /* The node in cgrp->pids_list */
+ struct list_head list;
+ /* The cgroup those pids belong to */
+ struct cgroup *cgrp;
+ /* The namepsace those pids belong to */
+ struct pid_namespace *ns;
+ /* Array of process ids in the cgroup */
+ pid_t *tasks_pids;
+ /* How many files are using the this tasks_pids array */
+ int use_count;
+ /* Length of the current tasks_pids array */
+ int length;
+};
+
static int cmppid(const void *a, const void *b)
{
return *(pid_t *)a - *(pid_t *)b;
}
-
/*
* seq_file methods for the "tasks" file. The seq_file position is the
* next pid to display; the seq_file iterator is a pointer to the pid
* after a seek to the start). Use a binary-search to find the
* next pid to display, if any
*/
- struct cgroup *cgrp = s->private;
+ struct cgroup_pids *cp = s->private;
+ struct cgroup *cgrp = cp->cgrp;
int index = 0, pid = *pos;
int *iter;
down_read(&cgrp->pids_mutex);
if (pid) {
- int end = cgrp->pids_length;
+ int end = cp->length;
while (index < end) {
int mid = (index + end) / 2;
- if (cgrp->tasks_pids[mid] == pid) {
+ if (cp->tasks_pids[mid] == pid) {
index = mid;
break;
- } else if (cgrp->tasks_pids[mid] <= pid)
+ } else if (cp->tasks_pids[mid] <= pid)
index = mid + 1;
else
end = mid;
}
}
/* If we're off the end of the array, we're done */
- if (index >= cgrp->pids_length)
+ if (index >= cp->length)
return NULL;
/* Update the abstract position to be the actual pid that we found */
- iter = cgrp->tasks_pids + index;
+ iter = cp->tasks_pids + index;
*pos = *iter;
return iter;
}
static void cgroup_tasks_stop(struct seq_file *s, void *v)
{
- struct cgroup *cgrp = s->private;
+ struct cgroup_pids *cp = s->private;
+ struct cgroup *cgrp = cp->cgrp;
up_read(&cgrp->pids_mutex);
}
static void *cgroup_tasks_next(struct seq_file *s, void *v, loff_t *pos)
{
- struct cgroup *cgrp = s->private;
+ struct cgroup_pids *cp = s->private;
int *p = v;
- int *end = cgrp->tasks_pids + cgrp->pids_length;
+ int *end = cp->tasks_pids + cp->length;
/*
* Advance to the next pid in the array. If this goes off the
.show = cgroup_tasks_show,
};
-static void release_cgroup_pid_array(struct cgroup *cgrp)
+static void release_cgroup_pid_array(struct cgroup_pids *cp)
{
+ struct cgroup *cgrp = cp->cgrp;
+
down_write(&cgrp->pids_mutex);
- BUG_ON(!cgrp->pids_use_count);
- if (!--cgrp->pids_use_count) {
- kfree(cgrp->tasks_pids);
- cgrp->tasks_pids = NULL;
- cgrp->pids_length = 0;
+ BUG_ON(!cp->use_count);
+ if (!--cp->use_count) {
+ list_del(&cp->list);
+ put_pid_ns(cp->ns);
+ kfree(cp->tasks_pids);
+ kfree(cp);
}
up_write(&cgrp->pids_mutex);
}
static int cgroup_tasks_release(struct inode *inode, struct file *file)
{
- struct cgroup *cgrp = __d_cgrp(file->f_dentry->d_parent);
+ struct seq_file *seq;
+ struct cgroup_pids *cp;
if (!(file->f_mode & FMODE_READ))
return 0;
- release_cgroup_pid_array(cgrp);
+ seq = file->private_data;
+ cp = seq->private;
+
+ release_cgroup_pid_array(cp);
return seq_release(inode, file);
}
static int cgroup_tasks_open(struct inode *unused, struct file *file)
{
struct cgroup *cgrp = __d_cgrp(file->f_dentry->d_parent);
+ struct pid_namespace *ns = current->nsproxy->pid_ns;
+ struct cgroup_pids *cp;
pid_t *pidarray;
int npids;
int retval;
* array if necessary
*/
down_write(&cgrp->pids_mutex);
- kfree(cgrp->tasks_pids);
- cgrp->tasks_pids = pidarray;
- cgrp->pids_length = npids;
- cgrp->pids_use_count++;
+
+ list_for_each_entry(cp, &cgrp->pids_list, list) {
+ if (ns == cp->ns)
+ goto found;
+ }
+
+ cp = kzalloc(sizeof(*cp), GFP_KERNEL);
+ if (!cp) {
+ up_write(&cgrp->pids_mutex);
+ kfree(pidarray);
+ return -ENOMEM;
+ }
+ cp->cgrp = cgrp;
+ cp->ns = ns;
+ get_pid_ns(ns);
+ list_add(&cp->list, &cgrp->pids_list);
+found:
+ kfree(cp->tasks_pids);
+ cp->tasks_pids = pidarray;
+ cp->length = npids;
+ cp->use_count++;
up_write(&cgrp->pids_mutex);
file->f_op = &cgroup_tasks_operations;
retval = seq_open(file, &cgroup_tasks_seq_operations);
if (retval) {
- release_cgroup_pid_array(cgrp);
+ release_cgroup_pid_array(cp);
return retval;
}
- ((struct seq_file *)file->private_data)->private = cgrp;
+ ((struct seq_file *)file->private_data)->private = cp;
return 0;
}
}
mutex_unlock(&cgroup_mutex);
+ /*
+ * In general, subsystem has no css->refcnt after pre_destroy(). But
+ * in racy cases, subsystem may have to get css->refcnt after
+ * pre_destroy() and it makes rmdir return with -EBUSY. This sometimes
+ * make rmdir return -EBUSY too often. To avoid that, we use waitqueue
+ * for cgroup's rmdir. CGRP_WAIT_ON_RMDIR is for synchronizing rmdir
+ * and subsystem's reference count handling. Please see css_get/put
+ * and css_tryget() and cgroup_wakeup_rmdir_waiter() implementation.
+ */
+ set_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags);
+
/*
* Call pre_destroy handlers of subsys. Notify subsystems
* that rmdir() request comes.
*/
ret = cgroup_call_pre_destroy(cgrp);
- if (ret)
+ if (ret) {
+ clear_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags);
return ret;
+ }
mutex_lock(&cgroup_mutex);
parent = cgrp->parent;
if (atomic_read(&cgrp->count) || !list_empty(&cgrp->children)) {
+ clear_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags);
mutex_unlock(&cgroup_mutex);
return -EBUSY;
}
- /*
- * css_put/get is provided for subsys to grab refcnt to css. In typical
- * case, subsystem has no reference after pre_destroy(). But, under
- * hierarchy management, some *temporal* refcnt can be hold.
- * To avoid returning -EBUSY to a user, waitqueue is used. If subsys
- * is really busy, it should return -EBUSY at pre_destroy(). wake_up
- * is called when css_put() is called and refcnt goes down to 0.
- */
- set_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags);
prepare_to_wait(&cgroup_rmdir_waitq, &wait, TASK_INTERRUPTIBLE);
-
if (!cgroup_clear_css_refs(cgrp)) {
mutex_unlock(&cgroup_mutex);
- schedule();
+ /*
+ * Because someone may call cgroup_wakeup_rmdir_waiter() before
+ * prepare_to_wait(), we need to check this flag.
+ */
+ if (test_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags))
+ schedule();
finish_wait(&cgroup_rmdir_waitq, &wait);
clear_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags);
if (signal_pending(current))
set_bit(CGRP_RELEASABLE, &cgrp->flags);
check_for_release(cgrp);
}
- cgroup_wakeup_rmdir_waiters(cgrp);
+ cgroup_wakeup_rmdir_waiter(cgrp);
}
rcu_read_unlock();
}
#include <linux/cn_proc.h>
#include "cred-internals.h"
+#if 0
+#define kdebug(FMT, ...) \
+ printk("[%-5.5s%5u] "FMT"\n", current->comm, current->pid ,##__VA_ARGS__)
+#else
+static inline __attribute__((format(printf, 1, 2)))
+void no_printk(const char *fmt, ...)
+{
+}
+#define kdebug(FMT, ...) \
+ no_printk("[%-5.5s%5u] "FMT"\n", current->comm, current->pid ,##__VA_ARGS__)
+#endif
+
static struct kmem_cache *cred_jar;
/*
*/
struct cred init_cred = {
.usage = ATOMIC_INIT(4),
+#ifdef CONFIG_DEBUG_CREDENTIALS
+ .subscribers = ATOMIC_INIT(2),
+ .magic = CRED_MAGIC,
+#endif
.securebits = SECUREBITS_DEFAULT,
.cap_inheritable = CAP_INIT_INH_SET,
.cap_permitted = CAP_FULL_SET,
#endif
};
+static inline void set_cred_subscribers(struct cred *cred, int n)
+{
+#ifdef CONFIG_DEBUG_CREDENTIALS
+ atomic_set(&cred->subscribers, n);
+#endif
+}
+
+static inline int read_cred_subscribers(const struct cred *cred)
+{
+#ifdef CONFIG_DEBUG_CREDENTIALS
+ return atomic_read(&cred->subscribers);
+#else
+ return 0;
+#endif
+}
+
+static inline void alter_cred_subscribers(const struct cred *_cred, int n)
+{
+#ifdef CONFIG_DEBUG_CREDENTIALS
+ struct cred *cred = (struct cred *) _cred;
+
+ atomic_add(n, &cred->subscribers);
+#endif
+}
+
/*
* Dispose of the shared task group credentials
*/
{
struct cred *cred = container_of(rcu, struct cred, rcu);
+ kdebug("put_cred_rcu(%p)", cred);
+
+#ifdef CONFIG_DEBUG_CREDENTIALS
+ if (cred->magic != CRED_MAGIC_DEAD ||
+ atomic_read(&cred->usage) != 0 ||
+ read_cred_subscribers(cred) != 0)
+ panic("CRED: put_cred_rcu() sees %p with"
+ " mag %x, put %p, usage %d, subscr %d\n",
+ cred, cred->magic, cred->put_addr,
+ atomic_read(&cred->usage),
+ read_cred_subscribers(cred));
+#else
if (atomic_read(&cred->usage) != 0)
panic("CRED: put_cred_rcu() sees %p with usage %d\n",
cred, atomic_read(&cred->usage));
+#endif
security_cred_free(cred);
key_put(cred->thread_keyring);
*/
void __put_cred(struct cred *cred)
{
+ kdebug("__put_cred(%p{%d,%d})", cred,
+ atomic_read(&cred->usage),
+ read_cred_subscribers(cred));
+
BUG_ON(atomic_read(&cred->usage) != 0);
+#ifdef CONFIG_DEBUG_CREDENTIALS
+ BUG_ON(read_cred_subscribers(cred) != 0);
+ cred->magic = CRED_MAGIC_DEAD;
+ cred->put_addr = __builtin_return_address(0);
+#endif
+ BUG_ON(cred == current->cred);
+ BUG_ON(cred == current->real_cred);
call_rcu(&cred->rcu, put_cred_rcu);
}
EXPORT_SYMBOL(__put_cred);
+/*
+ * Clean up a task's credentials when it exits
+ */
+void exit_creds(struct task_struct *tsk)
+{
+ struct cred *cred;
+
+ kdebug("exit_creds(%u,%p,%p,{%d,%d})", tsk->pid, tsk->real_cred, tsk->cred,
+ atomic_read(&tsk->cred->usage),
+ read_cred_subscribers(tsk->cred));
+
+ cred = (struct cred *) tsk->real_cred;
+ tsk->real_cred = NULL;
+ validate_creds(cred);
+ alter_cred_subscribers(cred, -1);
+ put_cred(cred);
+
+ cred = (struct cred *) tsk->cred;
+ tsk->cred = NULL;
+ validate_creds(cred);
+ alter_cred_subscribers(cred, -1);
+ put_cred(cred);
+
+ cred = (struct cred *) tsk->replacement_session_keyring;
+ if (cred) {
+ tsk->replacement_session_keyring = NULL;
+ validate_creds(cred);
+ put_cred(cred);
+ }
+}
+
+/*
+ * Allocate blank credentials, such that the credentials can be filled in at a
+ * later date without risk of ENOMEM.
+ */
+struct cred *cred_alloc_blank(void)
+{
+ struct cred *new;
+
+ new = kmem_cache_zalloc(cred_jar, GFP_KERNEL);
+ if (!new)
+ return NULL;
+
+#ifdef CONFIG_KEYS
+ new->tgcred = kzalloc(sizeof(*new->tgcred), GFP_KERNEL);
+ if (!new->tgcred) {
+ kfree(new);
+ return NULL;
+ }
+ atomic_set(&new->tgcred->usage, 1);
+#endif
+
+ atomic_set(&new->usage, 1);
+
+ if (security_cred_alloc_blank(new, GFP_KERNEL) < 0)
+ goto error;
+
+#ifdef CONFIG_DEBUG_CREDENTIALS
+ new->magic = CRED_MAGIC;
+#endif
+ return new;
+
+error:
+ abort_creds(new);
+ return NULL;
+}
+
/**
* prepare_creds - Prepare a new set of credentials for modification
*
const struct cred *old;
struct cred *new;
- BUG_ON(atomic_read(&task->real_cred->usage) < 1);
+ validate_process_creds();
new = kmem_cache_alloc(cred_jar, GFP_KERNEL);
if (!new)
return NULL;
+ kdebug("prepare_creds() alloc %p", new);
+
old = task->cred;
memcpy(new, old, sizeof(struct cred));
atomic_set(&new->usage, 1);
+ set_cred_subscribers(new, 0);
get_group_info(new->group_info);
get_uid(new->user);
if (security_prepare_creds(new, old, GFP_KERNEL) < 0)
goto error;
+ validate_creds(new);
return new;
error:
if (!new)
return NULL;
+ kdebug("prepare_usermodehelper_creds() alloc %p", new);
+
memcpy(new, &init_cred, sizeof(struct cred));
atomic_set(&new->usage, 1);
+ set_cred_subscribers(new, 0);
get_group_info(new->group_info);
get_uid(new->user);
#endif
if (security_prepare_creds(new, &init_cred, GFP_ATOMIC) < 0)
goto error;
+ validate_creds(new);
BUG_ON(atomic_read(&new->usage) != 1);
return new;
) {
p->real_cred = get_cred(p->cred);
get_cred(p->cred);
+ alter_cred_subscribers(p->cred, 2);
+ kdebug("share_creds(%p{%d,%d})",
+ p->cred, atomic_read(&p->cred->usage),
+ read_cred_subscribers(p->cred));
atomic_inc(&p->cred->user->processes);
return 0;
}
atomic_inc(&new->user->processes);
p->cred = p->real_cred = get_cred(new);
+ alter_cred_subscribers(new, 2);
+ validate_creds(new);
return 0;
error_put:
int commit_creds(struct cred *new)
{
struct task_struct *task = current;
- const struct cred *old;
+ const struct cred *old = task->real_cred;
- BUG_ON(task->cred != task->real_cred);
- BUG_ON(atomic_read(&task->real_cred->usage) < 2);
+ kdebug("commit_creds(%p{%d,%d})", new,
+ atomic_read(&new->usage),
+ read_cred_subscribers(new));
+
+ BUG_ON(task->cred != old);
+#ifdef CONFIG_DEBUG_CREDENTIALS
+ BUG_ON(read_cred_subscribers(old) < 2);
+ validate_creds(old);
+ validate_creds(new);
+#endif
BUG_ON(atomic_read(&new->usage) < 1);
- old = task->real_cred;
security_commit_creds(new, old);
get_cred(new); /* we will require a ref for the subj creds too */
* cheaply with the new uid cache, so if it matters
* we should be checking for it. -DaveM
*/
+ alter_cred_subscribers(new, 2);
if (new->user != old->user)
atomic_inc(&new->user->processes);
rcu_assign_pointer(task->real_cred, new);
rcu_assign_pointer(task->cred, new);
if (new->user != old->user)
atomic_dec(&old->user->processes);
+ alter_cred_subscribers(old, -2);
sched_switch_user(task);
*/
void abort_creds(struct cred *new)
{
+ kdebug("abort_creds(%p{%d,%d})", new,
+ atomic_read(&new->usage),
+ read_cred_subscribers(new));
+
+#ifdef CONFIG_DEBUG_CREDENTIALS
+ BUG_ON(read_cred_subscribers(new) != 0);
+#endif
BUG_ON(atomic_read(&new->usage) < 1);
put_cred(new);
}
{
const struct cred *old = current->cred;
- rcu_assign_pointer(current->cred, get_cred(new));
+ kdebug("override_creds(%p{%d,%d})", new,
+ atomic_read(&new->usage),
+ read_cred_subscribers(new));
+
+ validate_creds(old);
+ validate_creds(new);
+ get_cred(new);
+ alter_cred_subscribers(new, 1);
+ rcu_assign_pointer(current->cred, new);
+ alter_cred_subscribers(old, -1);
+
+ kdebug("override_creds() = %p{%d,%d}", old,
+ atomic_read(&old->usage),
+ read_cred_subscribers(old));
return old;
}
EXPORT_SYMBOL(override_creds);
{
const struct cred *override = current->cred;
+ kdebug("revert_creds(%p{%d,%d})", old,
+ atomic_read(&old->usage),
+ read_cred_subscribers(old));
+
+ validate_creds(old);
+ validate_creds(override);
+ alter_cred_subscribers(old, 1);
rcu_assign_pointer(current->cred, old);
+ alter_cred_subscribers(override, -1);
put_cred(override);
}
EXPORT_SYMBOL(revert_creds);
if (!new)
return NULL;
+ kdebug("prepare_kernel_cred() alloc %p", new);
+
if (daemon)
old = get_task_cred(daemon);
else
old = get_cred(&init_cred);
+ validate_creds(old);
+
*new = *old;
get_uid(new->user);
get_group_info(new->group_info);
goto error;
atomic_set(&new->usage, 1);
+ set_cred_subscribers(new, 0);
put_cred(old);
+ validate_creds(new);
return new;
error:
return security_kernel_create_files_as(new, inode);
}
EXPORT_SYMBOL(set_create_files_as);
+
+#ifdef CONFIG_DEBUG_CREDENTIALS
+
+/*
+ * dump invalid credentials
+ */
+static void dump_invalid_creds(const struct cred *cred, const char *label,
+ const struct task_struct *tsk)
+{
+ printk(KERN_ERR "CRED: %s credentials: %p %s%s%s\n",
+ label, cred,
+ cred == &init_cred ? "[init]" : "",
+ cred == tsk->real_cred ? "[real]" : "",
+ cred == tsk->cred ? "[eff]" : "");
+ printk(KERN_ERR "CRED: ->magic=%x, put_addr=%p\n",
+ cred->magic, cred->put_addr);
+ printk(KERN_ERR "CRED: ->usage=%d, subscr=%d\n",
+ atomic_read(&cred->usage),
+ read_cred_subscribers(cred));
+ printk(KERN_ERR "CRED: ->*uid = { %d,%d,%d,%d }\n",
+ cred->uid, cred->euid, cred->suid, cred->fsuid);
+ printk(KERN_ERR "CRED: ->*gid = { %d,%d,%d,%d }\n",
+ cred->gid, cred->egid, cred->sgid, cred->fsgid);
+#ifdef CONFIG_SECURITY
+ printk(KERN_ERR "CRED: ->security is %p\n", cred->security);
+ if ((unsigned long) cred->security >= PAGE_SIZE &&
+ (((unsigned long) cred->security & 0xffffff00) !=
+ (POISON_FREE << 24 | POISON_FREE << 16 | POISON_FREE << 8)))
+ printk(KERN_ERR "CRED: ->security {%x, %x}\n",
+ ((u32*)cred->security)[0],
+ ((u32*)cred->security)[1]);
+#endif
+}
+
+/*
+ * report use of invalid credentials
+ */
+void __invalid_creds(const struct cred *cred, const char *file, unsigned line)
+{
+ printk(KERN_ERR "CRED: Invalid credentials\n");
+ printk(KERN_ERR "CRED: At %s:%u\n", file, line);
+ dump_invalid_creds(cred, "Specified", current);
+ BUG();
+}
+EXPORT_SYMBOL(__invalid_creds);
+
+/*
+ * check the credentials on a process
+ */
+void __validate_process_creds(struct task_struct *tsk,
+ const char *file, unsigned line)
+{
+ if (tsk->cred == tsk->real_cred) {
+ if (unlikely(read_cred_subscribers(tsk->cred) < 2 ||
+ creds_are_invalid(tsk->cred)))
+ goto invalid_creds;
+ } else {
+ if (unlikely(read_cred_subscribers(tsk->real_cred) < 1 ||
+ read_cred_subscribers(tsk->cred) < 1 ||
+ creds_are_invalid(tsk->real_cred) ||
+ creds_are_invalid(tsk->cred)))
+ goto invalid_creds;
+ }
+ return;
+
+invalid_creds:
+ printk(KERN_ERR "CRED: Invalid process credentials\n");
+ printk(KERN_ERR "CRED: At %s:%u\n", file, line);
+
+ dump_invalid_creds(tsk->real_cred, "Real", tsk);
+ if (tsk->cred != tsk->real_cred)
+ dump_invalid_creds(tsk->cred, "Effective", tsk);
+ else
+ printk(KERN_ERR "CRED: Effective creds == Real creds\n");
+ BUG();
+}
+EXPORT_SYMBOL(__validate_process_creds);
+
+/*
+ * check creds for do_exit()
+ */
+void validate_creds_for_do_exit(struct task_struct *tsk)
+{
+ kdebug("validate_creds_for_do_exit(%p,%p{%d,%d})",
+ tsk->real_cred, tsk->cred,
+ atomic_read(&tsk->cred->usage),
+ read_cred_subscribers(tsk->cred));
+
+ __validate_process_creds(tsk, __FILE__, __LINE__);
+}
+
+#endif /* CONFIG_DEBUG_CREDENTIALS */
tracehook_report_exit(&code);
+ validate_creds_for_do_exit(tsk);
+
/*
* We're taking recursive faults here in do_exit. Safest is to just
* leave this task alone and wait for reboot.
if (tsk->splice_pipe)
__free_pipe_info(tsk->splice_pipe);
+ validate_creds_for_do_exit(tsk);
+
preempt_disable();
+ exit_rcu();
/* causes final put_task_struct in finish_task_switch(). */
tsk->state = TASK_DEAD;
schedule();
WARN_ON(atomic_read(&tsk->usage));
WARN_ON(tsk == current);
- put_cred(tsk->real_cred);
- put_cred(tsk->cred);
+ exit_creds(tsk);
delayacct_tsk_free(tsk);
if (!profile_handoff_task(tsk))
* the value intact in a core dump, and to save the unnecessary
* trouble otherwise. Userland only wants this done for a sys_exit.
*/
- if (tsk->clear_child_tid
- && !(tsk->flags & PF_SIGNALED)
- && atomic_read(&mm->mm_users) > 1) {
- u32 __user * tidptr = tsk->clear_child_tid;
+ if (tsk->clear_child_tid) {
+ if (!(tsk->flags & PF_SIGNALED) &&
+ atomic_read(&mm->mm_users) > 1) {
+ /*
+ * We don't check the error code - if userspace has
+ * not set up a proper pointer then tough luck.
+ */
+ put_user(0, tsk->clear_child_tid);
+ sys_futex(tsk->clear_child_tid, FUTEX_WAKE,
+ 1, NULL, NULL, 0);
+ }
tsk->clear_child_tid = NULL;
-
- /*
- * We don't check the error code - if userspace has
- * not set up a proper pointer then tough luck.
- */
- put_user(0, tidptr);
- sys_futex(tidptr, FUTEX_WAKE, 1, NULL, NULL, 0);
}
}
{
struct signal_struct *sig;
- if (clone_flags & CLONE_THREAD) {
- atomic_inc(¤t->signal->count);
- atomic_inc(¤t->signal->live);
+ if (clone_flags & CLONE_THREAD)
return 0;
- }
sig = kmem_cache_alloc(signal_cachep, GFP_KERNEL);
tsk->signal = sig;
kmem_cache_free(signal_cachep, sig);
}
-static void cleanup_signal(struct task_struct *tsk)
-{
- struct signal_struct *sig = tsk->signal;
-
- atomic_dec(&sig->live);
-
- if (atomic_dec_and_test(&sig->count))
- __cleanup_signal(sig);
-}
-
static void copy_flags(unsigned long clone_flags, struct task_struct *p)
{
unsigned long new_flags = p->flags;
copy_flags(clone_flags, p);
INIT_LIST_HEAD(&p->children);
INIT_LIST_HEAD(&p->sibling);
-#ifdef CONFIG_PREEMPT_RCU
- p->rcu_read_lock_nesting = 0;
- p->rcu_flipctr_idx = 0;
-#endif /* #ifdef CONFIG_PREEMPT_RCU */
+ rcu_copy_process(p);
p->vfork_done = NULL;
spin_lock_init(&p->alloc_lock);
}
if (clone_flags & CLONE_THREAD) {
+ atomic_inc(¤t->signal->count);
+ atomic_inc(¤t->signal->live);
p->group_leader = current->group_leader;
list_add_tail_rcu(&p->thread_group, &p->group_leader->thread_group);
}
write_unlock_irq(&tasklist_lock);
proc_fork_connector(p);
cgroup_post_fork(p);
+ perf_counter_fork(p);
return p;
bad_fork_free_pid:
if (p->mm)
mmput(p->mm);
bad_fork_cleanup_signal:
- cleanup_signal(p);
+ if (!(clone_flags & CLONE_THREAD))
+ __cleanup_signal(p->signal);
bad_fork_cleanup_sighand:
__cleanup_sighand(p->sighand);
bad_fork_cleanup_fs:
module_put(task_thread_info(p)->exec_domain->module);
bad_fork_cleanup_count:
atomic_dec(&p->cred->user->processes);
- put_cred(p->real_cred);
- put_cred(p->cred);
+ exit_creds(p);
bad_fork_free:
free_task(p);
fork_out:
if (clone_flags & CLONE_VFORK) {
p->vfork_done = &vfork;
init_completion(&vfork);
- } else if (!(clone_flags & CLONE_VM)) {
- /*
- * vfork will do an exec which will call
- * set_task_comm()
- */
- perf_counter_fork(p);
}
audit_finish_fork(p);
recalc_sigpending(); /* We sent fake signal, clean it up */
spin_unlock_irq(¤t->sighand->siglock);
+ /* prevent accounting of that task to load */
+ current->flags |= PF_FREEZING;
+
for (;;) {
set_current_state(TASK_UNINTERRUPTIBLE);
if (!frozen(current))
break;
schedule();
}
+
+ /* Remove the accounting blocker */
+ current->flags &= ~PF_FREEZING;
+
pr_debug("%s left refrigerator\n", current->comm);
__set_current_state(save);
}
/* rt_waiter storage for requeue_pi: */
struct rt_mutex_waiter *rt_waiter;
+ /* The expected requeue pi target futex key: */
+ union futex_key *requeue_pi_key;
+
/* Bitset for the optional bitmasked wakeup */
u32 bitset;
};
if (err < 0)
return err;
+ page = compound_head(page);
lock_page(page);
if (!page->mapping) {
unlock_page(page);
* requeue_pi_wake_futex() - Wake a task that acquired the lock during requeue
* q: the futex_q
* key: the key of the requeue target futex
+ * hb: the hash_bucket of the requeue target futex
*
* During futex_requeue, with requeue_pi=1, it is possible to acquire the
* target futex if it is uncontended or via a lock steal. Set the futex_q key
* to the requeue target futex so the waiter can detect the wakeup on the right
* futex, but remove it from the hb and NULL the rt_waiter so it can detect
- * atomic lock acquisition. Must be called with the q->lock_ptr held.
+ * atomic lock acquisition. Set the q->lock_ptr to the requeue target hb->lock
+ * to protect access to the pi_state to fixup the owner later. Must be called
+ * with both q->lock_ptr and hb->lock held.
*/
static inline
-void requeue_pi_wake_futex(struct futex_q *q, union futex_key *key)
+void requeue_pi_wake_futex(struct futex_q *q, union futex_key *key,
+ struct futex_hash_bucket *hb)
{
drop_futex_key_refs(&q->key);
get_futex_key_refs(key);
WARN_ON(!q->rt_waiter);
q->rt_waiter = NULL;
+ q->lock_ptr = &hb->lock;
+#ifdef CONFIG_DEBUG_PI_LIST
+ q->list.plist.lock = &hb->lock;
+#endif
+
wake_up_state(q->task, TASK_NORMAL);
}
if (!top_waiter)
return 0;
+ /* Ensure we requeue to the expected futex. */
+ if (!match_futex(top_waiter->requeue_pi_key, key2))
+ return -EINVAL;
+
/*
* Try to take the lock for top_waiter. Set the FUTEX_WAITERS bit in
* the contended case or if set_waiters is 1. The pi_state is returned
ret = futex_lock_pi_atomic(pifutex, hb2, key2, ps, top_waiter->task,
set_waiters);
if (ret == 1)
- requeue_pi_wake_futex(top_waiter, key2);
+ requeue_pi_wake_futex(top_waiter, key2, hb2);
return ret;
}
if (!match_futex(&this->key, &key1))
continue;
- WARN_ON(!requeue_pi && this->rt_waiter);
- WARN_ON(requeue_pi && !this->rt_waiter);
+ /*
+ * FUTEX_WAIT_REQEUE_PI and FUTEX_CMP_REQUEUE_PI should always
+ * be paired with each other and no other futex ops.
+ */
+ if ((requeue_pi && !this->rt_waiter) ||
+ (!requeue_pi && this->rt_waiter)) {
+ ret = -EINVAL;
+ break;
+ }
/*
* Wake nr_wake waiters. For requeue_pi, if we acquired the
continue;
}
+ /* Ensure we requeue to the expected futex for requeue_pi. */
+ if (requeue_pi && !match_futex(this->requeue_pi_key, &key2)) {
+ ret = -EINVAL;
+ break;
+ }
+
/*
* Requeue nr_requeue waiters and possibly one more in the case
* of requeue_pi if we couldn't acquire the lock atomically.
this->task, 1);
if (ret == 1) {
/* We got the lock. */
- requeue_pi_wake_futex(this, &key2);
+ requeue_pi_wake_futex(this, &key2, hb2);
continue;
} else if (ret) {
/* -EDEADLK */
q.pi_state = NULL;
q.bitset = bitset;
q.rt_waiter = NULL;
+ q.requeue_pi_key = NULL;
if (abs_time) {
to = &timeout;
q.pi_state = NULL;
q.rt_waiter = NULL;
+ q.requeue_pi_key = NULL;
retry:
q.key = FUTEX_KEY_INIT;
ret = get_futex_key(uaddr, fshared, &q.key, VERIFY_WRITE);
* We call schedule in futex_wait_queue_me() when we enqueue and return there
* via the following:
* 1) wakeup on uaddr2 after an atomic lock acquisition by futex_requeue()
- * 2) wakeup on uaddr2 after a requeue and subsequent unlock
- * 3) signal (before or after requeue)
- * 4) timeout (before or after requeue)
+ * 2) wakeup on uaddr2 after a requeue
+ * 3) signal
+ * 4) timeout
*
- * If 3, we setup a restart_block with futex_wait_requeue_pi() as the function.
+ * If 3, cleanup and return -ERESTARTNOINTR.
*
* If 2, we may then block on trying to take the rt_mutex and return via:
* 5) successful lock
* 7) timeout
* 8) other lock acquisition failure
*
- * If 6, we setup a restart_block with futex_lock_pi() as the function.
+ * If 6, return -EWOULDBLOCK (restarting the syscall would do the same).
*
* If 4 or 7, we cleanup and return with -ETIMEDOUT.
*
debug_rt_mutex_init_waiter(&rt_waiter);
rt_waiter.task = NULL;
- q.pi_state = NULL;
- q.bitset = bitset;
- q.rt_waiter = &rt_waiter;
-
key2 = FUTEX_KEY_INIT;
ret = get_futex_key(uaddr2, fshared, &key2, VERIFY_WRITE);
if (unlikely(ret != 0))
goto out;
+ q.pi_state = NULL;
+ q.bitset = bitset;
+ q.rt_waiter = &rt_waiter;
+ q.requeue_pi_key = &key2;
+
/* Prepare to wait on uaddr. */
ret = futex_wait_setup(uaddr, val, fshared, &q, &hb);
if (ret)
rt_mutex_unlock(pi_mutex);
} else if (ret == -EINTR) {
/*
- * We've already been requeued, but we have no way to
- * restart by calling futex_lock_pi() directly. We
- * could restart the syscall, but that will look at
- * the user space value and return right away. So we
- * drop back with EWOULDBLOCK to tell user space that
- * "val" has been changed. That's the same what the
- * restart of the syscall would do in
- * futex_wait_setup().
+ * We've already been requeued, but cannot restart by calling
+ * futex_lock_pi() directly. We could restart this syscall, but
+ * it would detect that the user space "val" changed and return
+ * -EWOULDBLOCK. Save the overhead of the restart and return
+ * -EWOULDBLOCK directly.
*/
ret = -EWOULDBLOCK;
}
int cmd = op & FUTEX_CMD_MASK;
if (utime && (cmd == FUTEX_WAIT || cmd == FUTEX_LOCK_PI ||
- cmd == FUTEX_WAIT_BITSET)) {
+ cmd == FUTEX_WAIT_BITSET ||
+ cmd == FUTEX_WAIT_REQUEUE_PI)) {
if (get_compat_timespec(&ts, utime))
return -EFAULT;
if (!timespec_valid(&ts))
t = ktime_add_safe(ktime_get(), t);
tp = &t;
}
- if (cmd == FUTEX_REQUEUE || cmd == FUTEX_CMP_REQUEUE)
+ if (cmd == FUTEX_REQUEUE || cmd == FUTEX_CMP_REQUEUE ||
+ cmd == FUTEX_CMP_REQUEUE_PI || cmd == FUTEX_WAKE_OP)
val2 = (int) (unsigned long) utime;
return do_futex(uaddr, op, val, tp, uaddr2, val2, val3);
}
}
+
+/*
+ * Get the preferred target CPU for NOHZ
+ */
+static int hrtimer_get_target(int this_cpu, int pinned)
+{
+#ifdef CONFIG_NO_HZ
+ if (!pinned && get_sysctl_timer_migration() && idle_cpu(this_cpu)) {
+ int preferred_cpu = get_nohz_load_balancer();
+
+ if (preferred_cpu >= 0)
+ return preferred_cpu;
+ }
+#endif
+ return this_cpu;
+}
+
+/*
+ * With HIGHRES=y we do not migrate the timer when it is expiring
+ * before the next event on the target cpu because we cannot reprogram
+ * the target cpu hardware and we would cause it to fire late.
+ *
+ * Called with cpu_base->lock of target cpu held.
+ */
+static int
+hrtimer_check_target(struct hrtimer *timer, struct hrtimer_clock_base *new_base)
+{
+#ifdef CONFIG_HIGH_RES_TIMERS
+ ktime_t expires;
+
+ if (!new_base->cpu_base->hres_active)
+ return 0;
+
+ expires = ktime_sub(hrtimer_get_expires(timer), new_base->offset);
+ return expires.tv64 <= new_base->cpu_base->expires_next.tv64;
+#else
+ return 0;
+#endif
+}
+
/*
* Switch the timer base to the current CPU when possible.
*/
{
struct hrtimer_clock_base *new_base;
struct hrtimer_cpu_base *new_cpu_base;
- int cpu, preferred_cpu = -1;
-
- cpu = smp_processor_id();
-#if defined(CONFIG_NO_HZ) && defined(CONFIG_SMP)
- if (!pinned && get_sysctl_timer_migration() && idle_cpu(cpu)) {
- preferred_cpu = get_nohz_load_balancer();
- if (preferred_cpu >= 0)
- cpu = preferred_cpu;
- }
-#endif
+ int this_cpu = smp_processor_id();
+ int cpu = hrtimer_get_target(this_cpu, pinned);
again:
new_cpu_base = &per_cpu(hrtimer_bases, cpu);
if (base != new_base) {
/*
- * We are trying to schedule the timer on the local CPU.
+ * We are trying to move timer to new_base.
* However we can't change timer's base while it is running,
* so we keep it on the same CPU. No hassle vs. reprogramming
* the event source in the high resolution case. The softirq
spin_unlock(&base->cpu_base->lock);
spin_lock(&new_base->cpu_base->lock);
- /* Optimized away for NOHZ=n SMP=n */
- if (cpu == preferred_cpu) {
- /* Calculate clock monotonic expiry time */
-#ifdef CONFIG_HIGH_RES_TIMERS
- ktime_t expires = ktime_sub(hrtimer_get_expires(timer),
- new_base->offset);
-#else
- ktime_t expires = hrtimer_get_expires(timer);
-#endif
-
- /*
- * Get the next event on target cpu from the
- * clock events layer.
- * This covers the highres=off nohz=on case as well.
- */
- ktime_t next = clockevents_get_next_event(cpu);
-
- ktime_t delta = ktime_sub(expires, next);
-
- /*
- * We do not migrate the timer when it is expiring
- * before the next event on the target cpu because
- * we cannot reprogram the target cpu hardware and
- * we would cause it to fire late.
- */
- if (delta.tv64 < 0) {
- cpu = smp_processor_id();
- spin_unlock(&new_base->cpu_base->lock);
- spin_lock(&base->cpu_base->lock);
- timer->base = base;
- goto again;
- }
+ if (cpu != this_cpu && hrtimer_check_target(timer, new_base)) {
+ cpu = this_cpu;
+ spin_unlock(&new_base->cpu_base->lock);
+ spin_lock(&base->cpu_base->lock);
+ timer->base = base;
+ goto again;
}
timer->base = new_base;
}
expires_next.tv64 = KTIME_MAX;
+ spin_lock(&cpu_base->lock);
+ /*
+ * We set expires_next to KTIME_MAX here with cpu_base->lock
+ * held to prevent that a timer is enqueued in our queue via
+ * the migration code. This does not affect enqueueing of
+ * timers which run their callback and need to be requeued on
+ * this CPU.
+ */
+ cpu_base->expires_next.tv64 = KTIME_MAX;
+
base = cpu_base->clock_base;
for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) {
ktime_t basenow;
struct rb_node *node;
- spin_lock(&cpu_base->lock);
-
basenow = ktime_add(now, base->offset);
while ((node = base->first)) {
__run_hrtimer(timer);
}
- spin_unlock(&cpu_base->lock);
base++;
}
+ /*
+ * Store the new expiry value so the migration code can verify
+ * against it.
+ */
cpu_base->expires_next = expires_next;
+ spin_unlock(&cpu_base->lock);
/* Reprogramming necessary ? */
if (expires_next.tv64 != KTIME_MAX) {
}
EXPORT_SYMBOL(set_irq_chip_data);
+/**
+ * set_irq_nested_thread - Set/Reset the IRQ_NESTED_THREAD flag of an irq
+ *
+ * @irq: Interrupt number
+ * @nest: 0 to clear / 1 to set the IRQ_NESTED_THREAD flag
+ *
+ * The IRQ_NESTED_THREAD flag indicates that on
+ * request_threaded_irq() no separate interrupt thread should be
+ * created for the irq as the handler are called nested in the
+ * context of a demultiplexing interrupt handler thread.
+ */
+void set_irq_nested_thread(unsigned int irq, int nest)
+{
+ struct irq_desc *desc = irq_to_desc(irq);
+ unsigned long flags;
+
+ if (!desc)
+ return;
+
+ spin_lock_irqsave(&desc->lock, flags);
+ if (nest)
+ desc->status |= IRQ_NESTED_THREAD;
+ else
+ desc->status &= ~IRQ_NESTED_THREAD;
+ spin_unlock_irqrestore(&desc->lock, flags);
+}
+EXPORT_SYMBOL_GPL(set_irq_nested_thread);
+
/*
* default enable function
*/
}
}
+/*
+ * handle_nested_irq - Handle a nested irq from a irq thread
+ * @irq: the interrupt number
+ *
+ * Handle interrupts which are nested into a threaded interrupt
+ * handler. The handler function is called inside the calling
+ * threads context.
+ */
+void handle_nested_irq(unsigned int irq)
+{
+ struct irq_desc *desc = irq_to_desc(irq);
+ struct irqaction *action;
+ irqreturn_t action_ret;
+
+ might_sleep();
+
+ spin_lock_irq(&desc->lock);
+
+ kstat_incr_irqs_this_cpu(irq, desc);
+
+ action = desc->action;
+ if (unlikely(!action || (desc->status & IRQ_DISABLED)))
+ goto out_unlock;
+
+ desc->status |= IRQ_INPROGRESS;
+ spin_unlock_irq(&desc->lock);
+
+ action_ret = action->thread_fn(action->irq, action->dev_id);
+ if (!noirqdebug)
+ note_interrupt(irq, desc, action_ret);
+
+ spin_lock_irq(&desc->lock);
+ desc->status &= ~IRQ_INPROGRESS;
+
+out_unlock:
+ spin_unlock_irq(&desc->lock);
+}
+EXPORT_SYMBOL_GPL(handle_nested_irq);
+
/**
* handle_simple_irq - Simple and software-decoded IRQs.
* @irq: the interrupt number
spin_lock(&desc->lock);
desc->status &= ~IRQ_INPROGRESS;
- if (!(desc->status & IRQ_DISABLED) && desc->chip->unmask)
+
+ if (unlikely(desc->status & IRQ_ONESHOT))
+ desc->status |= IRQ_MASKED;
+ else if (!(desc->status & IRQ_DISABLED) && desc->chip->unmask)
desc->chip->unmask(irq);
out_unlock:
spin_unlock(&desc->lock);
desc->chip = &dummy_irq_chip;
}
+ chip_bus_lock(irq, desc);
spin_lock_irqsave(&desc->lock, flags);
/* Uninstall? */
desc->chip->startup(irq);
}
spin_unlock_irqrestore(&desc->lock, flags);
+ chip_bus_sync_unlock(irq, desc);
}
EXPORT_SYMBOL_GPL(__set_irq_handler);
desc = irq_desc_legacy;
legacy_count = ARRAY_SIZE(irq_desc_legacy);
- node = first_online_node;
+ node = first_online_node;
/* allocate irq_desc_ptrs array based on nr_irqs */
irq_desc_ptrs = kcalloc(nr_irqs, sizeof(void *), GFP_NOWAIT);
for (i = 0; i < legacy_count; i++) {
desc[i].irq = i;
+#ifdef CONFIG_SMP
+ desc[i].node = node;
+#endif
desc[i].kstat_irqs = kstat_irqs_legacy + i * nr_cpu_ids;
lockdep_set_class(&desc[i].lock, &irq_desc_lock_class);
alloc_desc_masks(&desc[i], node, true);
extern int irq_select_affinity_usr(unsigned int irq);
-extern void
-irq_set_thread_affinity(struct irq_desc *desc, const struct cpumask *cpumask);
+extern void irq_set_thread_affinity(struct irq_desc *desc);
+
+/* Inline functions for support of irq chips on slow busses */
+static inline void chip_bus_lock(unsigned int irq, struct irq_desc *desc)
+{
+ if (unlikely(desc->chip->bus_lock))
+ desc->chip->bus_lock(irq);
+}
+
+static inline void chip_bus_sync_unlock(unsigned int irq, struct irq_desc *desc)
+{
+ if (unlikely(desc->chip->bus_sync_unlock))
+ desc->chip->bus_sync_unlock(irq);
+}
/*
* Debugging printout:
return 1;
}
-void
-irq_set_thread_affinity(struct irq_desc *desc, const struct cpumask *cpumask)
+/**
+ * irq_set_thread_affinity - Notify irq threads to adjust affinity
+ * @desc: irq descriptor which has affitnity changed
+ *
+ * We just set IRQTF_AFFINITY and delegate the affinity setting
+ * to the interrupt thread itself. We can not call
+ * set_cpus_allowed_ptr() here as we hold desc->lock and this
+ * code can be called from hard interrupt context.
+ */
+void irq_set_thread_affinity(struct irq_desc *desc)
{
struct irqaction *action = desc->action;
while (action) {
if (action->thread)
- set_cpus_allowed_ptr(action->thread, cpumask);
+ set_bit(IRQTF_AFFINITY, &action->thread_flags);
action = action->next;
}
}
if (desc->status & IRQ_MOVE_PCNTXT) {
if (!desc->chip->set_affinity(irq, cpumask)) {
cpumask_copy(desc->affinity, cpumask);
- irq_set_thread_affinity(desc, cpumask);
+ irq_set_thread_affinity(desc);
}
}
else {
#else
if (!desc->chip->set_affinity(irq, cpumask)) {
cpumask_copy(desc->affinity, cpumask);
- irq_set_thread_affinity(desc, cpumask);
+ irq_set_thread_affinity(desc);
}
#endif
desc->status |= IRQ_AFFINITY_SET;
spin_lock_irqsave(&desc->lock, flags);
ret = setup_affinity(irq, desc);
if (!ret)
- irq_set_thread_affinity(desc, desc->affinity);
+ irq_set_thread_affinity(desc);
spin_unlock_irqrestore(&desc->lock, flags);
return ret;
if (!desc)
return;
+ chip_bus_lock(irq, desc);
spin_lock_irqsave(&desc->lock, flags);
__disable_irq(desc, irq, false);
spin_unlock_irqrestore(&desc->lock, flags);
+ chip_bus_sync_unlock(irq, desc);
}
EXPORT_SYMBOL(disable_irq_nosync);
* matches the last disable, processing of interrupts on this
* IRQ line is re-enabled.
*
- * This function may be called from IRQ context.
+ * This function may be called from IRQ context only when
+ * desc->chip->bus_lock and desc->chip->bus_sync_unlock are NULL !
*/
void enable_irq(unsigned int irq)
{
if (!desc)
return;
+ chip_bus_lock(irq, desc);
spin_lock_irqsave(&desc->lock, flags);
__enable_irq(desc, irq, false);
spin_unlock_irqrestore(&desc->lock, flags);
+ chip_bus_sync_unlock(irq, desc);
}
EXPORT_SYMBOL(enable_irq);
return ret;
}
+/*
+ * Default primary interrupt handler for threaded interrupts. Is
+ * assigned as primary handler when request_threaded_irq is called
+ * with handler == NULL. Useful for oneshot interrupts.
+ */
+static irqreturn_t irq_default_primary_handler(int irq, void *dev_id)
+{
+ return IRQ_WAKE_THREAD;
+}
+
+/*
+ * Primary handler for nested threaded interrupts. Should never be
+ * called.
+ */
+static irqreturn_t irq_nested_primary_handler(int irq, void *dev_id)
+{
+ WARN(1, "Primary handler called for nested irq %d\n", irq);
+ return IRQ_NONE;
+}
+
static int irq_wait_for_interrupt(struct irqaction *action)
{
while (!kthread_should_stop()) {
return -1;
}
+/*
+ * Oneshot interrupts keep the irq line masked until the threaded
+ * handler finished. unmask if the interrupt has not been disabled and
+ * is marked MASKED.
+ */
+static void irq_finalize_oneshot(unsigned int irq, struct irq_desc *desc)
+{
+ chip_bus_lock(irq, desc);
+ spin_lock_irq(&desc->lock);
+ if (!(desc->status & IRQ_DISABLED) && (desc->status & IRQ_MASKED)) {
+ desc->status &= ~IRQ_MASKED;
+ desc->chip->unmask(irq);
+ }
+ spin_unlock_irq(&desc->lock);
+ chip_bus_sync_unlock(irq, desc);
+}
+
+#ifdef CONFIG_SMP
+/*
+ * Check whether we need to change the affinity of the interrupt thread.
+ */
+static void
+irq_thread_check_affinity(struct irq_desc *desc, struct irqaction *action)
+{
+ cpumask_var_t mask;
+
+ if (!test_and_clear_bit(IRQTF_AFFINITY, &action->thread_flags))
+ return;
+
+ /*
+ * In case we are out of memory we set IRQTF_AFFINITY again and
+ * try again next time
+ */
+ if (!alloc_cpumask_var(&mask, GFP_KERNEL)) {
+ set_bit(IRQTF_AFFINITY, &action->thread_flags);
+ return;
+ }
+
+ spin_lock_irq(&desc->lock);
+ cpumask_copy(mask, desc->affinity);
+ spin_unlock_irq(&desc->lock);
+
+ set_cpus_allowed_ptr(current, mask);
+ free_cpumask_var(mask);
+}
+#else
+static inline void
+irq_thread_check_affinity(struct irq_desc *desc, struct irqaction *action) { }
+#endif
+
/*
* Interrupt handler thread
*/
struct sched_param param = { .sched_priority = MAX_USER_RT_PRIO/2, };
struct irqaction *action = data;
struct irq_desc *desc = irq_to_desc(action->irq);
- int wake;
+ int wake, oneshot = desc->status & IRQ_ONESHOT;
sched_setscheduler(current, SCHED_FIFO, ¶m);
current->irqaction = action;
while (!irq_wait_for_interrupt(action)) {
+ irq_thread_check_affinity(desc, action);
+
atomic_inc(&desc->threads_active);
spin_lock_irq(&desc->lock);
spin_unlock_irq(&desc->lock);
action->thread_fn(action->irq, action->dev_id);
+
+ if (oneshot)
+ irq_finalize_oneshot(action->irq, desc);
}
wake = atomic_dec_and_test(&desc->threads_active);
struct irqaction *old, **old_ptr;
const char *old_name = NULL;
unsigned long flags;
- int shared = 0;
+ int nested, shared = 0;
int ret;
if (!desc)
rand_initialize_irq(irq);
}
+ /* Oneshot interrupts are not allowed with shared */
+ if ((new->flags & IRQF_ONESHOT) && (new->flags & IRQF_SHARED))
+ return -EINVAL;
+
+ /*
+ * Check whether the interrupt nests into another interrupt
+ * thread.
+ */
+ nested = desc->status & IRQ_NESTED_THREAD;
+ if (nested) {
+ if (!new->thread_fn)
+ return -EINVAL;
+ /*
+ * Replace the primary handler which was provided from
+ * the driver for non nested interrupt handling by the
+ * dummy function which warns when called.
+ */
+ new->handler = irq_nested_primary_handler;
+ }
+
/*
- * Threaded handler ?
+ * Create a handler thread when a thread function is supplied
+ * and the interrupt does not nest into another interrupt
+ * thread.
*/
- if (new->thread_fn) {
+ if (new->thread_fn && !nested) {
struct task_struct *t;
t = kthread_create(irq_thread, new, "irq/%d-%s", irq,
*/
get_task_struct(t);
new->thread = t;
- wake_up_process(t);
}
/*
desc->status |= IRQ_PER_CPU;
#endif
- desc->status &= ~(IRQ_AUTODETECT | IRQ_WAITING |
+ desc->status &= ~(IRQ_AUTODETECT | IRQ_WAITING | IRQ_ONESHOT |
IRQ_INPROGRESS | IRQ_SPURIOUS_DISABLED);
+ if (new->flags & IRQF_ONESHOT)
+ desc->status |= IRQ_ONESHOT;
+
if (!(desc->status & IRQ_NOAUTOEN)) {
desc->depth = 0;
desc->status &= ~IRQ_DISABLED;
(int)(new->flags & IRQF_TRIGGER_MASK));
}
+ new->irq = irq;
*old_ptr = new;
/* Reset broken irq detection when installing new handler */
spin_unlock_irqrestore(&desc->lock, flags);
- new->irq = irq;
+ /*
+ * Strictly no need to wake it up, but hung_task complains
+ * when no hard interrupt wakes the thread up.
+ */
+ if (new->thread)
+ wake_up_process(new->thread);
+
register_irq_proc(irq, desc);
new->dir = NULL;
register_handler_proc(irq, new);
{
struct irq_desc *desc = irq_to_desc(irq);
struct irqaction *action, **action_ptr;
- struct task_struct *irqthread;
unsigned long flags;
WARN(in_interrupt(), "Trying to free IRQ %d from IRQ context!\n", irq);
desc->chip->disable(irq);
}
- irqthread = action->thread;
- action->thread = NULL;
-
spin_unlock_irqrestore(&desc->lock, flags);
unregister_handler_proc(irq, action);
/* Make sure it's not being used on another CPU: */
synchronize_irq(irq);
- if (irqthread) {
- if (!test_bit(IRQTF_DIED, &action->thread_flags))
- kthread_stop(irqthread);
- put_task_struct(irqthread);
- }
-
#ifdef CONFIG_DEBUG_SHIRQ
/*
* It's a shared IRQ -- the driver ought to be prepared for an IRQ
local_irq_restore(flags);
}
#endif
+
+ if (action->thread) {
+ if (!test_bit(IRQTF_DIED, &action->thread_flags))
+ kthread_stop(action->thread);
+ put_task_struct(action->thread);
+ }
+
return action;
}
*/
void free_irq(unsigned int irq, void *dev_id)
{
+ struct irq_desc *desc = irq_to_desc(irq);
+
+ if (!desc)
+ return;
+
+ chip_bus_lock(irq, desc);
kfree(__free_irq(irq, dev_id));
+ chip_bus_sync_unlock(irq, desc);
}
EXPORT_SYMBOL(free_irq);
* @irq: Interrupt line to allocate
* @handler: Function to be called when the IRQ occurs.
* Primary handler for threaded interrupts
+ * If NULL and thread_fn != NULL the default
+ * primary handler is installed
* @thread_fn: Function called from the irq handler thread
* If NULL, no irq thread is created
* @irqflags: Interrupt type flags
if (desc->status & IRQ_NOREQUEST)
return -EINVAL;
- if (!handler)
- return -EINVAL;
+
+ if (!handler) {
+ if (!thread_fn)
+ return -EINVAL;
+ handler = irq_default_primary_handler;
+ }
action = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
if (!action)
action->name = devname;
action->dev_id = dev_id;
+ chip_bus_lock(irq, desc);
retval = __setup_irq(irq, desc, action);
+ chip_bus_sync_unlock(irq, desc);
+
if (retval)
kfree(action);
< nr_cpu_ids))
if (!desc->chip->set_affinity(irq, desc->pending_mask)) {
cpumask_copy(desc->affinity, desc->pending_mask);
- irq_set_thread_affinity(desc, desc->pending_mask);
+ irq_set_thread_affinity(desc);
}
cpumask_clear(desc->pending_mask);
struct irq_desc *move_irq_desc(struct irq_desc *desc, int node)
{
- /* those all static, do move them */
- if (desc->irq < NR_IRQS_LEGACY)
+ /* those static or target node is -1, do not move them */
+ if (desc->irq < NR_IRQS_LEGACY || node == -1)
return desc;
if (desc->node != node)
/**
* suspend_device_irqs - disable all currently enabled interrupt lines
*
- * During system-wide suspend or hibernation device interrupts need to be
- * disabled at the chip level and this function is provided for this purpose.
- * It disables all interrupt lines that are enabled at the moment and sets the
- * IRQ_SUSPENDED flag for them.
+ * During system-wide suspend or hibernation device drivers need to be prevented
+ * from receiving interrupts and this function is provided for this purpose.
+ * It marks all interrupt lines in use, except for the timer ones, as disabled
+ * and sets the IRQ_SUSPENDED flag for each of them.
*/
void suspend_device_irqs(void)
{
if ((status & (IRQ_LEVEL | IRQ_PENDING | IRQ_REPLAY)) == IRQ_PENDING) {
desc->status = (status & ~IRQ_PENDING) | IRQ_REPLAY;
- if (!desc->chip || !desc->chip->retrigger ||
- !desc->chip->retrigger(irq)) {
+ if (!desc->chip->retrigger || !desc->chip->retrigger(irq)) {
#ifdef CONFIG_HARDIRQS_SW_RESEND
/* Set it pending and activate the softirq: */
set_bit(irq, irqs_resend);
__setup("irqfixup", irqfixup_setup);
module_param(irqfixup, int, 0644);
-MODULE_PARM_DESC("irqfixup", "0: No fixup, 1: irqfixup mode, 2: irqpoll mode");
static int __init irqpoll_setup(char *str)
{
} while (*cur++ == ',');
if (*crash_size > 0) {
- while (*cur != ' ' && *cur != '@')
+ while (*cur && *cur != ' ' && *cur != '@')
cur++;
if (*cur == '@') {
cur++;
#define MAX_KMOD_CONCURRENT 50 /* Completely arbitrary value - KAO */
static int kmod_loop_msg;
+ ret = security_kernel_module_request();
+ if (ret)
+ return ret;
+
va_start(args, fmt);
ret = vsnprintf(module_name, MODULE_NAME_LEN, fmt, args);
va_end(args);
int retval = 0;
BUG_ON(atomic_read(&sub_info->cred->usage) != 1);
+ validate_creds(sub_info->cred);
helper_lock();
if (sub_info->path[0] == '\0')
p->addr = addr;
preempt_disable();
- if (!__kernel_text_address((unsigned long) p->addr) ||
+ if (!kernel_text_address((unsigned long) p->addr) ||
in_kprobes_functions((unsigned long) p->addr)) {
preempt_enable();
return -EINVAL;
* @k: thread created by kthread_create().
*
* Sets kthread_should_stop() for @k to return true, wakes it, and
- * waits for it to exit. Your threadfn() must not call do_exit()
- * itself if you use this function! This can also be called after
- * kthread_create() instead of calling wake_up_process(): the thread
- * will exit without calling threadfn().
+ * waits for it to exit. This can also be called after kthread_create()
+ * instead of calling wake_up_process(): the thread will exit without
+ * calling threadfn().
+ *
+ * If threadfn() may call do_exit() itself, the caller must ensure
+ * task_struct can't go away.
*
* Returns the result of threadfn(), or %-EINTR if wake_up_process()
* was never called.
#include <linux/hash.h>
#include <linux/ftrace.h>
#include <linux/stringify.h>
+#include <linux/bitops.h>
#include <asm/sections.h>
save_stack_trace(trace);
+ /*
+ * Some daft arches put -1 at the end to indicate its a full trace.
+ *
+ * <rant> this is buggy anyway, since it takes a whole extra entry so a
+ * complete trace that maxes out the entries provided will be reported
+ * as incomplete, friggin useless </rant>
+ */
+ if (trace->entries[trace->nr_entries-1] == ULONG_MAX)
+ trace->nr_entries--;
+
trace->max_entries = trace->nr_entries;
nr_stack_trace_entries += trace->nr_entries;
- if (nr_stack_trace_entries == MAX_STACK_TRACE_ENTRIES) {
+ if (nr_stack_trace_entries >= MAX_STACK_TRACE_ENTRIES-1) {
if (!debug_locks_off_graph_unlock())
return 0;
unsigned int nr_softirq_chains;
unsigned int nr_process_chains;
unsigned int max_lockdep_depth;
-unsigned int max_recursion_depth;
-
-static unsigned int lockdep_dependency_gen_id;
-
-static bool lockdep_dependency_visit(struct lock_class *source,
- unsigned int depth)
-{
- if (!depth)
- lockdep_dependency_gen_id++;
- if (source->dep_gen_id == lockdep_dependency_gen_id)
- return true;
- source->dep_gen_id = lockdep_dependency_gen_id;
- return false;
-}
#ifdef CONFIG_DEBUG_LOCKDEP
/*
atomic_t redundant_softirqs_off;
atomic_t nr_unused_locks;
atomic_t nr_cyclic_checks;
-atomic_t nr_cyclic_check_recursions;
atomic_t nr_find_usage_forwards_checks;
-atomic_t nr_find_usage_forwards_recursions;
atomic_t nr_find_usage_backwards_checks;
-atomic_t nr_find_usage_backwards_recursions;
#endif
/*
}
}
-static void print_lock_class_header(struct lock_class *class, int depth)
-{
- int bit;
-
- printk("%*s->", depth, "");
- print_lock_name(class);
- printk(" ops: %lu", class->ops);
- printk(" {\n");
-
- for (bit = 0; bit < LOCK_USAGE_STATES; bit++) {
- if (class->usage_mask & (1 << bit)) {
- int len = depth;
-
- len += printk("%*s %s", depth, "", usage_str[bit]);
- len += printk(" at:\n");
- print_stack_trace(class->usage_traces + bit, len);
- }
- }
- printk("%*s }\n", depth, "");
-
- printk("%*s ... key at: ",depth,"");
- print_ip_sym((unsigned long)class->key);
-}
-
-/*
- * printk all lock dependencies starting at <entry>:
- */
-static void __used
-print_lock_dependencies(struct lock_class *class, int depth)
-{
- struct lock_list *entry;
-
- if (lockdep_dependency_visit(class, depth))
- return;
-
- if (DEBUG_LOCKS_WARN_ON(depth >= 20))
- return;
-
- print_lock_class_header(class, depth);
-
- list_for_each_entry(entry, &class->locks_after, entry) {
- if (DEBUG_LOCKS_WARN_ON(!entry->class))
- return;
-
- print_lock_dependencies(entry->class, depth + 1);
-
- printk("%*s ... acquired at:\n",depth,"");
- print_stack_trace(&entry->trace, 2);
- printk("\n");
- }
-}
-
static void print_kernel_version(void)
{
printk("%s %.*s\n", init_utsname()->release,
return 1;
}
+/*
+ * For good efficiency of modular, we use power of 2
+ */
+#define MAX_CIRCULAR_QUEUE_SIZE 4096UL
+#define CQ_MASK (MAX_CIRCULAR_QUEUE_SIZE-1)
+
+/*
+ * The circular_queue and helpers is used to implement the
+ * breadth-first search(BFS)algorithem, by which we can build
+ * the shortest path from the next lock to be acquired to the
+ * previous held lock if there is a circular between them.
+ */
+struct circular_queue {
+ unsigned long element[MAX_CIRCULAR_QUEUE_SIZE];
+ unsigned int front, rear;
+};
+
+static struct circular_queue lock_cq;
+
+unsigned int max_bfs_queue_depth;
+
+static unsigned int lockdep_dependency_gen_id;
+
+static inline void __cq_init(struct circular_queue *cq)
+{
+ cq->front = cq->rear = 0;
+ lockdep_dependency_gen_id++;
+}
+
+static inline int __cq_empty(struct circular_queue *cq)
+{
+ return (cq->front == cq->rear);
+}
+
+static inline int __cq_full(struct circular_queue *cq)
+{
+ return ((cq->rear + 1) & CQ_MASK) == cq->front;
+}
+
+static inline int __cq_enqueue(struct circular_queue *cq, unsigned long elem)
+{
+ if (__cq_full(cq))
+ return -1;
+
+ cq->element[cq->rear] = elem;
+ cq->rear = (cq->rear + 1) & CQ_MASK;
+ return 0;
+}
+
+static inline int __cq_dequeue(struct circular_queue *cq, unsigned long *elem)
+{
+ if (__cq_empty(cq))
+ return -1;
+
+ *elem = cq->element[cq->front];
+ cq->front = (cq->front + 1) & CQ_MASK;
+ return 0;
+}
+
+static inline unsigned int __cq_get_elem_count(struct circular_queue *cq)
+{
+ return (cq->rear - cq->front) & CQ_MASK;
+}
+
+static inline void mark_lock_accessed(struct lock_list *lock,
+ struct lock_list *parent)
+{
+ unsigned long nr;
+
+ nr = lock - list_entries;
+ WARN_ON(nr >= nr_list_entries);
+ lock->parent = parent;
+ lock->class->dep_gen_id = lockdep_dependency_gen_id;
+}
+
+static inline unsigned long lock_accessed(struct lock_list *lock)
+{
+ unsigned long nr;
+
+ nr = lock - list_entries;
+ WARN_ON(nr >= nr_list_entries);
+ return lock->class->dep_gen_id == lockdep_dependency_gen_id;
+}
+
+static inline struct lock_list *get_lock_parent(struct lock_list *child)
+{
+ return child->parent;
+}
+
+static inline int get_lock_depth(struct lock_list *child)
+{
+ int depth = 0;
+ struct lock_list *parent;
+
+ while ((parent = get_lock_parent(child))) {
+ child = parent;
+ depth++;
+ }
+ return depth;
+}
+
+static int __bfs(struct lock_list *source_entry,
+ void *data,
+ int (*match)(struct lock_list *entry, void *data),
+ struct lock_list **target_entry,
+ int forward)
+{
+ struct lock_list *entry;
+ struct list_head *head;
+ struct circular_queue *cq = &lock_cq;
+ int ret = 1;
+
+ if (match(source_entry, data)) {
+ *target_entry = source_entry;
+ ret = 0;
+ goto exit;
+ }
+
+ if (forward)
+ head = &source_entry->class->locks_after;
+ else
+ head = &source_entry->class->locks_before;
+
+ if (list_empty(head))
+ goto exit;
+
+ __cq_init(cq);
+ __cq_enqueue(cq, (unsigned long)source_entry);
+
+ while (!__cq_empty(cq)) {
+ struct lock_list *lock;
+
+ __cq_dequeue(cq, (unsigned long *)&lock);
+
+ if (!lock->class) {
+ ret = -2;
+ goto exit;
+ }
+
+ if (forward)
+ head = &lock->class->locks_after;
+ else
+ head = &lock->class->locks_before;
+
+ list_for_each_entry(entry, head, entry) {
+ if (!lock_accessed(entry)) {
+ unsigned int cq_depth;
+ mark_lock_accessed(entry, lock);
+ if (match(entry, data)) {
+ *target_entry = entry;
+ ret = 0;
+ goto exit;
+ }
+
+ if (__cq_enqueue(cq, (unsigned long)entry)) {
+ ret = -1;
+ goto exit;
+ }
+ cq_depth = __cq_get_elem_count(cq);
+ if (max_bfs_queue_depth < cq_depth)
+ max_bfs_queue_depth = cq_depth;
+ }
+ }
+ }
+exit:
+ return ret;
+}
+
+static inline int __bfs_forwards(struct lock_list *src_entry,
+ void *data,
+ int (*match)(struct lock_list *entry, void *data),
+ struct lock_list **target_entry)
+{
+ return __bfs(src_entry, data, match, target_entry, 1);
+
+}
+
+static inline int __bfs_backwards(struct lock_list *src_entry,
+ void *data,
+ int (*match)(struct lock_list *entry, void *data),
+ struct lock_list **target_entry)
+{
+ return __bfs(src_entry, data, match, target_entry, 0);
+
+}
+
/*
* Recursive, forwards-direction lock-dependency checking, used for
* both noncyclic checking and for hardirq-unsafe/softirq-unsafe
* checking.
- *
- * (to keep the stackframe of the recursive functions small we
- * use these global variables, and we also mark various helper
- * functions as noinline.)
*/
-static struct held_lock *check_source, *check_target;
/*
* Print a dependency chain entry (this is only done when a deadlock
* has been detected):
*/
static noinline int
-print_circular_bug_entry(struct lock_list *target, unsigned int depth)
+print_circular_bug_entry(struct lock_list *target, int depth)
{
if (debug_locks_silent)
return 0;
* header first:
*/
static noinline int
-print_circular_bug_header(struct lock_list *entry, unsigned int depth)
+print_circular_bug_header(struct lock_list *entry, unsigned int depth,
+ struct held_lock *check_src,
+ struct held_lock *check_tgt)
{
struct task_struct *curr = current;
- if (!debug_locks_off_graph_unlock() || debug_locks_silent)
+ if (debug_locks_silent)
return 0;
printk("\n=======================================================\n");
printk( "-------------------------------------------------------\n");
printk("%s/%d is trying to acquire lock:\n",
curr->comm, task_pid_nr(curr));
- print_lock(check_source);
+ print_lock(check_src);
printk("\nbut task is already holding lock:\n");
- print_lock(check_target);
+ print_lock(check_tgt);
printk("\nwhich lock already depends on the new lock.\n\n");
printk("\nthe existing dependency chain (in reverse order) is:\n");
return 0;
}
-static noinline int print_circular_bug_tail(void)
+static inline int class_equal(struct lock_list *entry, void *data)
+{
+ return entry->class == data;
+}
+
+static noinline int print_circular_bug(struct lock_list *this,
+ struct lock_list *target,
+ struct held_lock *check_src,
+ struct held_lock *check_tgt)
{
struct task_struct *curr = current;
- struct lock_list this;
+ struct lock_list *parent;
+ int depth;
- if (debug_locks_silent)
+ if (!debug_locks_off_graph_unlock() || debug_locks_silent)
return 0;
- this.class = hlock_class(check_source);
- if (!save_trace(&this.trace))
+ if (!save_trace(&this->trace))
return 0;
- print_circular_bug_entry(&this, 0);
+ depth = get_lock_depth(target);
+
+ print_circular_bug_header(target, depth, check_src, check_tgt);
+
+ parent = get_lock_parent(target);
+
+ while (parent) {
+ print_circular_bug_entry(parent, --depth);
+ parent = get_lock_parent(parent);
+ }
printk("\nother info that might help us debug this:\n\n");
lockdep_print_held_locks(curr);
return 0;
}
-#define RECURSION_LIMIT 40
-
-static int noinline print_infinite_recursion_bug(void)
+static noinline int print_bfs_bug(int ret)
{
if (!debug_locks_off_graph_unlock())
return 0;
- WARN_ON(1);
+ WARN(1, "lockdep bfs error:%d\n", ret);
return 0;
}
-unsigned long __lockdep_count_forward_deps(struct lock_class *class,
- unsigned int depth)
+static int noop_count(struct lock_list *entry, void *data)
{
- struct lock_list *entry;
- unsigned long ret = 1;
+ (*(unsigned long *)data)++;
+ return 0;
+}
- if (lockdep_dependency_visit(class, depth))
- return 0;
+unsigned long __lockdep_count_forward_deps(struct lock_list *this)
+{
+ unsigned long count = 0;
+ struct lock_list *uninitialized_var(target_entry);
- /*
- * Recurse this class's dependency list:
- */
- list_for_each_entry(entry, &class->locks_after, entry)
- ret += __lockdep_count_forward_deps(entry->class, depth + 1);
+ __bfs_forwards(this, (void *)&count, noop_count, &target_entry);
- return ret;
+ return count;
}
-
unsigned long lockdep_count_forward_deps(struct lock_class *class)
{
unsigned long ret, flags;
+ struct lock_list this;
+
+ this.parent = NULL;
+ this.class = class;
local_irq_save(flags);
__raw_spin_lock(&lockdep_lock);
- ret = __lockdep_count_forward_deps(class, 0);
+ ret = __lockdep_count_forward_deps(&this);
__raw_spin_unlock(&lockdep_lock);
local_irq_restore(flags);
return ret;
}
-unsigned long __lockdep_count_backward_deps(struct lock_class *class,
- unsigned int depth)
+unsigned long __lockdep_count_backward_deps(struct lock_list *this)
{
- struct lock_list *entry;
- unsigned long ret = 1;
+ unsigned long count = 0;
+ struct lock_list *uninitialized_var(target_entry);
- if (lockdep_dependency_visit(class, depth))
- return 0;
- /*
- * Recurse this class's dependency list:
- */
- list_for_each_entry(entry, &class->locks_before, entry)
- ret += __lockdep_count_backward_deps(entry->class, depth + 1);
+ __bfs_backwards(this, (void *)&count, noop_count, &target_entry);
- return ret;
+ return count;
}
unsigned long lockdep_count_backward_deps(struct lock_class *class)
{
unsigned long ret, flags;
+ struct lock_list this;
+
+ this.parent = NULL;
+ this.class = class;
local_irq_save(flags);
__raw_spin_lock(&lockdep_lock);
- ret = __lockdep_count_backward_deps(class, 0);
+ ret = __lockdep_count_backward_deps(&this);
__raw_spin_unlock(&lockdep_lock);
local_irq_restore(flags);
* lead to <target>. Print an error and return 0 if it does.
*/
static noinline int
-check_noncircular(struct lock_class *source, unsigned int depth)
+check_noncircular(struct lock_list *root, struct lock_class *target,
+ struct lock_list **target_entry)
{
- struct lock_list *entry;
+ int result;
- if (lockdep_dependency_visit(source, depth))
- return 1;
+ debug_atomic_inc(&nr_cyclic_checks);
- debug_atomic_inc(&nr_cyclic_check_recursions);
- if (depth > max_recursion_depth)
- max_recursion_depth = depth;
- if (depth >= RECURSION_LIMIT)
- return print_infinite_recursion_bug();
- /*
- * Check this lock's dependency list:
- */
- list_for_each_entry(entry, &source->locks_after, entry) {
- if (entry->class == hlock_class(check_target))
- return print_circular_bug_header(entry, depth+1);
- debug_atomic_inc(&nr_cyclic_checks);
- if (!check_noncircular(entry->class, depth+1))
- return print_circular_bug_entry(entry, depth+1);
- }
- return 1;
+ result = __bfs_forwards(root, target, class_equal, target_entry);
+
+ return result;
}
#if defined(CONFIG_TRACE_IRQFLAGS) && defined(CONFIG_PROVE_LOCKING)
* proving that two subgraphs can be connected by a new dependency
* without creating any illegal irq-safe -> irq-unsafe lock dependency.
*/
-static enum lock_usage_bit find_usage_bit;
-static struct lock_class *forwards_match, *backwards_match;
+
+static inline int usage_match(struct lock_list *entry, void *bit)
+{
+ return entry->class->usage_mask & (1 << (enum lock_usage_bit)bit);
+}
+
+
/*
* Find a node in the forwards-direction dependency sub-graph starting
- * at <source> that matches <find_usage_bit>.
+ * at @root->class that matches @bit.
*
- * Return 2 if such a node exists in the subgraph, and put that node
- * into <forwards_match>.
+ * Return 0 if such a node exists in the subgraph, and put that node
+ * into *@target_entry.
*
- * Return 1 otherwise and keep <forwards_match> unchanged.
- * Return 0 on error.
+ * Return 1 otherwise and keep *@target_entry unchanged.
+ * Return <0 on error.
*/
-static noinline int
-find_usage_forwards(struct lock_class *source, unsigned int depth)
+static int
+find_usage_forwards(struct lock_list *root, enum lock_usage_bit bit,
+ struct lock_list **target_entry)
{
- struct lock_list *entry;
- int ret;
-
- if (lockdep_dependency_visit(source, depth))
- return 1;
-
- if (depth > max_recursion_depth)
- max_recursion_depth = depth;
- if (depth >= RECURSION_LIMIT)
- return print_infinite_recursion_bug();
+ int result;
debug_atomic_inc(&nr_find_usage_forwards_checks);
- if (source->usage_mask & (1 << find_usage_bit)) {
- forwards_match = source;
- return 2;
- }
- /*
- * Check this lock's dependency list:
- */
- list_for_each_entry(entry, &source->locks_after, entry) {
- debug_atomic_inc(&nr_find_usage_forwards_recursions);
- ret = find_usage_forwards(entry->class, depth+1);
- if (ret == 2 || ret == 0)
- return ret;
- }
- return 1;
+ result = __bfs_forwards(root, (void *)bit, usage_match, target_entry);
+
+ return result;
}
/*
* Find a node in the backwards-direction dependency sub-graph starting
- * at <source> that matches <find_usage_bit>.
+ * at @root->class that matches @bit.
*
- * Return 2 if such a node exists in the subgraph, and put that node
- * into <backwards_match>.
+ * Return 0 if such a node exists in the subgraph, and put that node
+ * into *@target_entry.
*
- * Return 1 otherwise and keep <backwards_match> unchanged.
- * Return 0 on error.
+ * Return 1 otherwise and keep *@target_entry unchanged.
+ * Return <0 on error.
*/
-static noinline int
-find_usage_backwards(struct lock_class *source, unsigned int depth)
+static int
+find_usage_backwards(struct lock_list *root, enum lock_usage_bit bit,
+ struct lock_list **target_entry)
{
- struct lock_list *entry;
- int ret;
+ int result;
- if (lockdep_dependency_visit(source, depth))
- return 1;
+ debug_atomic_inc(&nr_find_usage_backwards_checks);
- if (!__raw_spin_is_locked(&lockdep_lock))
- return DEBUG_LOCKS_WARN_ON(1);
+ result = __bfs_backwards(root, (void *)bit, usage_match, target_entry);
- if (depth > max_recursion_depth)
- max_recursion_depth = depth;
- if (depth >= RECURSION_LIMIT)
- return print_infinite_recursion_bug();
+ return result;
+}
- debug_atomic_inc(&nr_find_usage_backwards_checks);
- if (source->usage_mask & (1 << find_usage_bit)) {
- backwards_match = source;
- return 2;
- }
+static void print_lock_class_header(struct lock_class *class, int depth)
+{
+ int bit;
- if (!source && debug_locks_off_graph_unlock()) {
- WARN_ON(1);
- return 0;
- }
+ printk("%*s->", depth, "");
+ print_lock_name(class);
+ printk(" ops: %lu", class->ops);
+ printk(" {\n");
- /*
- * Check this lock's dependency list:
- */
- list_for_each_entry(entry, &source->locks_before, entry) {
- debug_atomic_inc(&nr_find_usage_backwards_recursions);
- ret = find_usage_backwards(entry->class, depth+1);
- if (ret == 2 || ret == 0)
- return ret;
+ for (bit = 0; bit < LOCK_USAGE_STATES; bit++) {
+ if (class->usage_mask & (1 << bit)) {
+ int len = depth;
+
+ len += printk("%*s %s", depth, "", usage_str[bit]);
+ len += printk(" at:\n");
+ print_stack_trace(class->usage_traces + bit, len);
+ }
}
- return 1;
+ printk("%*s }\n", depth, "");
+
+ printk("%*s ... key at: ",depth,"");
+ print_ip_sym((unsigned long)class->key);
+}
+
+/*
+ * printk the shortest lock dependencies from @start to @end in reverse order:
+ */
+static void __used
+print_shortest_lock_dependencies(struct lock_list *leaf,
+ struct lock_list *root)
+{
+ struct lock_list *entry = leaf;
+ int depth;
+
+ /*compute depth from generated tree by BFS*/
+ depth = get_lock_depth(leaf);
+
+ do {
+ print_lock_class_header(entry->class, depth);
+ printk("%*s ... acquired at:\n", depth, "");
+ print_stack_trace(&entry->trace, 2);
+ printk("\n");
+
+ if (depth == 0 && (entry != root)) {
+ printk("lockdep:%s bad BFS generated tree\n", __func__);
+ break;
+ }
+
+ entry = get_lock_parent(entry);
+ depth--;
+ } while (entry && (depth >= 0));
+
+ return;
}
static int
print_bad_irq_dependency(struct task_struct *curr,
+ struct lock_list *prev_root,
+ struct lock_list *next_root,
+ struct lock_list *backwards_entry,
+ struct lock_list *forwards_entry,
struct held_lock *prev,
struct held_lock *next,
enum lock_usage_bit bit1,
printk("\nbut this new dependency connects a %s-irq-safe lock:\n",
irqclass);
- print_lock_name(backwards_match);
+ print_lock_name(backwards_entry->class);
printk("\n... which became %s-irq-safe at:\n", irqclass);
- print_stack_trace(backwards_match->usage_traces + bit1, 1);
+ print_stack_trace(backwards_entry->class->usage_traces + bit1, 1);
printk("\nto a %s-irq-unsafe lock:\n", irqclass);
- print_lock_name(forwards_match);
+ print_lock_name(forwards_entry->class);
printk("\n... which became %s-irq-unsafe at:\n", irqclass);
printk("...");
- print_stack_trace(forwards_match->usage_traces + bit2, 1);
+ print_stack_trace(forwards_entry->class->usage_traces + bit2, 1);
printk("\nother info that might help us debug this:\n\n");
lockdep_print_held_locks(curr);
- printk("\nthe %s-irq-safe lock's dependencies:\n", irqclass);
- print_lock_dependencies(backwards_match, 0);
+ printk("\nthe dependencies between %s-irq-safe lock", irqclass);
+ printk(" and the holding lock:\n");
+ if (!save_trace(&prev_root->trace))
+ return 0;
+ print_shortest_lock_dependencies(backwards_entry, prev_root);
- printk("\nthe %s-irq-unsafe lock's dependencies:\n", irqclass);
- print_lock_dependencies(forwards_match, 0);
+ printk("\nthe dependencies between the lock to be acquired");
+ printk(" and %s-irq-unsafe lock:\n", irqclass);
+ if (!save_trace(&next_root->trace))
+ return 0;
+ print_shortest_lock_dependencies(forwards_entry, next_root);
printk("\nstack backtrace:\n");
dump_stack();
enum lock_usage_bit bit_forwards, const char *irqclass)
{
int ret;
+ struct lock_list this, that;
+ struct lock_list *uninitialized_var(target_entry);
+ struct lock_list *uninitialized_var(target_entry1);
- find_usage_bit = bit_backwards;
- /* fills in <backwards_match> */
- ret = find_usage_backwards(hlock_class(prev), 0);
- if (!ret || ret == 1)
+ this.parent = NULL;
+
+ this.class = hlock_class(prev);
+ ret = find_usage_backwards(&this, bit_backwards, &target_entry);
+ if (ret < 0)
+ return print_bfs_bug(ret);
+ if (ret == 1)
return ret;
- find_usage_bit = bit_forwards;
- ret = find_usage_forwards(hlock_class(next), 0);
- if (!ret || ret == 1)
+ that.parent = NULL;
+ that.class = hlock_class(next);
+ ret = find_usage_forwards(&that, bit_forwards, &target_entry1);
+ if (ret < 0)
+ return print_bfs_bug(ret);
+ if (ret == 1)
return ret;
- /* ret == 2 */
- return print_bad_irq_dependency(curr, prev, next,
+
+ return print_bad_irq_dependency(curr, &this, &that,
+ target_entry, target_entry1,
+ prev, next,
bit_backwards, bit_forwards, irqclass);
}
{
struct lock_list *entry;
int ret;
+ struct lock_list this;
+ struct lock_list *uninitialized_var(target_entry);
/*
* Prove that the new <prev> -> <next> dependency would not
* We are using global variables to control the recursion, to
* keep the stackframe size of the recursive functions low:
*/
- check_source = next;
- check_target = prev;
- if (!(check_noncircular(hlock_class(next), 0)))
- return print_circular_bug_tail();
+ this.class = hlock_class(next);
+ this.parent = NULL;
+ ret = check_noncircular(&this, hlock_class(prev), &target_entry);
+ if (unlikely(!ret))
+ return print_circular_bug(&this, target_entry, next, prev);
+ else if (unlikely(ret < 0))
+ return print_bfs_bug(ret);
if (!check_prev_add_irq(curr, prev, next))
return 0;
* print irq inversion bug:
*/
static int
-print_irq_inversion_bug(struct task_struct *curr, struct lock_class *other,
+print_irq_inversion_bug(struct task_struct *curr,
+ struct lock_list *root, struct lock_list *other,
struct held_lock *this, int forwards,
const char *irqclass)
{
printk("but this lock took another, %s-unsafe lock in the past:\n", irqclass);
else
printk("but this lock was taken by another, %s-safe lock in the past:\n", irqclass);
- print_lock_name(other);
+ print_lock_name(other->class);
printk("\n\nand interrupts could create inverse lock ordering between them.\n\n");
printk("\nother info that might help us debug this:\n");
lockdep_print_held_locks(curr);
- printk("\nthe first lock's dependencies:\n");
- print_lock_dependencies(hlock_class(this), 0);
-
- printk("\nthe second lock's dependencies:\n");
- print_lock_dependencies(other, 0);
+ printk("\nthe shortest dependencies between 2nd lock and 1st lock:\n");
+ if (!save_trace(&root->trace))
+ return 0;
+ print_shortest_lock_dependencies(other, root);
printk("\nstack backtrace:\n");
dump_stack();
enum lock_usage_bit bit, const char *irqclass)
{
int ret;
-
- find_usage_bit = bit;
- /* fills in <forwards_match> */
- ret = find_usage_forwards(hlock_class(this), 0);
- if (!ret || ret == 1)
+ struct lock_list root;
+ struct lock_list *uninitialized_var(target_entry);
+
+ root.parent = NULL;
+ root.class = hlock_class(this);
+ ret = find_usage_forwards(&root, bit, &target_entry);
+ if (ret < 0)
+ return print_bfs_bug(ret);
+ if (ret == 1)
return ret;
- return print_irq_inversion_bug(curr, forwards_match, this, 1, irqclass);
+ return print_irq_inversion_bug(curr, &root, target_entry,
+ this, 1, irqclass);
}
/*
enum lock_usage_bit bit, const char *irqclass)
{
int ret;
-
- find_usage_bit = bit;
- /* fills in <backwards_match> */
- ret = find_usage_backwards(hlock_class(this), 0);
- if (!ret || ret == 1)
+ struct lock_list root;
+ struct lock_list *uninitialized_var(target_entry);
+
+ root.parent = NULL;
+ root.class = hlock_class(this);
+ ret = find_usage_backwards(&root, bit, &target_entry);
+ if (ret < 0)
+ return print_bfs_bug(ret);
+ if (ret == 1)
return ret;
- return print_irq_inversion_bug(curr, backwards_match, this, 0, irqclass);
+ return print_irq_inversion_bug(curr, &root, target_entry,
+ this, 1, irqclass);
}
void print_irqtrace_events(struct task_struct *curr)
*/
static int __lock_acquire(struct lockdep_map *lock, unsigned int subclass,
int trylock, int read, int check, int hardirqs_off,
- struct lockdep_map *nest_lock, unsigned long ip)
+ struct lockdep_map *nest_lock, unsigned long ip,
+ int references)
{
struct task_struct *curr = current;
struct lock_class *class = NULL;
struct held_lock *hlock;
unsigned int depth, id;
int chain_head = 0;
+ int class_idx;
u64 chain_key;
if (!prove_locking)
if (DEBUG_LOCKS_WARN_ON(depth >= MAX_LOCK_DEPTH))
return 0;
+ class_idx = class - lock_classes + 1;
+
+ if (depth) {
+ hlock = curr->held_locks + depth - 1;
+ if (hlock->class_idx == class_idx && nest_lock) {
+ if (hlock->references)
+ hlock->references++;
+ else
+ hlock->references = 2;
+
+ return 1;
+ }
+ }
+
hlock = curr->held_locks + depth;
if (DEBUG_LOCKS_WARN_ON(!class))
return 0;
- hlock->class_idx = class - lock_classes + 1;
+ hlock->class_idx = class_idx;
hlock->acquire_ip = ip;
hlock->instance = lock;
hlock->nest_lock = nest_lock;
hlock->read = read;
hlock->check = check;
hlock->hardirqs_off = !!hardirqs_off;
+ hlock->references = references;
#ifdef CONFIG_LOCK_STAT
hlock->waittime_stamp = 0;
hlock->holdtime_stamp = sched_clock();
return 1;
}
+static int match_held_lock(struct held_lock *hlock, struct lockdep_map *lock)
+{
+ if (hlock->instance == lock)
+ return 1;
+
+ if (hlock->references) {
+ struct lock_class *class = lock->class_cache;
+
+ if (!class)
+ class = look_up_lock_class(lock, 0);
+
+ if (DEBUG_LOCKS_WARN_ON(!class))
+ return 0;
+
+ if (DEBUG_LOCKS_WARN_ON(!hlock->nest_lock))
+ return 0;
+
+ if (hlock->class_idx == class - lock_classes + 1)
+ return 1;
+ }
+
+ return 0;
+}
+
static int
__lock_set_class(struct lockdep_map *lock, const char *name,
struct lock_class_key *key, unsigned int subclass,
*/
if (prev_hlock && prev_hlock->irq_context != hlock->irq_context)
break;
- if (hlock->instance == lock)
+ if (match_held_lock(hlock, lock))
goto found_it;
prev_hlock = hlock;
}
if (!__lock_acquire(hlock->instance,
hlock_class(hlock)->subclass, hlock->trylock,
hlock->read, hlock->check, hlock->hardirqs_off,
- hlock->nest_lock, hlock->acquire_ip))
+ hlock->nest_lock, hlock->acquire_ip,
+ hlock->references))
return 0;
}
*/
if (prev_hlock && prev_hlock->irq_context != hlock->irq_context)
break;
- if (hlock->instance == lock)
+ if (match_held_lock(hlock, lock))
goto found_it;
prev_hlock = hlock;
}
return print_unlock_inbalance_bug(curr, lock, ip);
found_it:
- lock_release_holdtime(hlock);
+ if (hlock->instance == lock)
+ lock_release_holdtime(hlock);
+
+ if (hlock->references) {
+ hlock->references--;
+ if (hlock->references) {
+ /*
+ * We had, and after removing one, still have
+ * references, the current lock stack is still
+ * valid. We're done!
+ */
+ return 1;
+ }
+ }
/*
* We have the right lock to unlock, 'hlock' points to it.
* Now we remove it from the stack, and add back the other
* entries (if any), recalculating the hash along the way:
*/
+
curr->lockdep_depth = i;
curr->curr_chain_key = hlock->prev_chain_key;
if (!__lock_acquire(hlock->instance,
hlock_class(hlock)->subclass, hlock->trylock,
hlock->read, hlock->check, hlock->hardirqs_off,
- hlock->nest_lock, hlock->acquire_ip))
+ hlock->nest_lock, hlock->acquire_ip,
+ hlock->references))
return 0;
}
/*
* Is the unlock non-nested:
*/
- if (hlock->instance != lock)
+ if (hlock->instance != lock || hlock->references)
return lock_release_non_nested(curr, lock, ip);
curr->lockdep_depth--;
check_chain_key(curr);
}
+static int __lock_is_held(struct lockdep_map *lock)
+{
+ struct task_struct *curr = current;
+ int i;
+
+ for (i = 0; i < curr->lockdep_depth; i++) {
+ struct held_lock *hlock = curr->held_locks + i;
+
+ if (match_held_lock(hlock, lock))
+ return 1;
+ }
+
+ return 0;
+}
+
/*
* Check whether we follow the irq-flags state precisely:
*/
current->lockdep_recursion = 1;
__lock_acquire(lock, subclass, trylock, read, check,
- irqs_disabled_flags(flags), nest_lock, ip);
+ irqs_disabled_flags(flags), nest_lock, ip, 0);
current->lockdep_recursion = 0;
raw_local_irq_restore(flags);
}
}
EXPORT_SYMBOL_GPL(lock_release);
+int lock_is_held(struct lockdep_map *lock)
+{
+ unsigned long flags;
+ int ret = 0;
+
+ if (unlikely(current->lockdep_recursion))
+ return ret;
+
+ raw_local_irq_save(flags);
+ check_flags(flags);
+
+ current->lockdep_recursion = 1;
+ ret = __lock_is_held(lock);
+ current->lockdep_recursion = 0;
+ raw_local_irq_restore(flags);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(lock_is_held);
+
void lockdep_set_current_reclaim_state(gfp_t gfp_mask)
{
current->lockdep_reclaim_gfp = gfp_mask;
*/
if (prev_hlock && prev_hlock->irq_context != hlock->irq_context)
break;
- if (hlock->instance == lock)
+ if (match_held_lock(hlock, lock))
goto found_it;
prev_hlock = hlock;
}
return;
found_it:
+ if (hlock->instance != lock)
+ return;
+
hlock->waittime_stamp = sched_clock();
contention_point = lock_point(hlock_class(hlock)->contention_point, ip);
*/
if (prev_hlock && prev_hlock->irq_context != hlock->irq_context)
break;
- if (hlock->instance == lock)
+ if (match_held_lock(hlock, lock))
goto found_it;
prev_hlock = hlock;
}
return;
found_it:
+ if (hlock->instance != lock)
+ return;
+
cpu = smp_processor_id();
if (hlock->waittime_stamp) {
now = sched_clock();
sizeof(struct list_head) * CLASSHASH_SIZE +
sizeof(struct lock_list) * MAX_LOCKDEP_ENTRIES +
sizeof(struct lock_chain) * MAX_LOCKDEP_CHAINS +
- sizeof(struct list_head) * CHAINHASH_SIZE) / 1024);
+ sizeof(struct list_head) * CHAINHASH_SIZE
+#ifdef CONFIG_PROVE_LOCKING
+ + sizeof(struct circular_queue)
+#endif
+ ) / 1024
+ );
printk(" per task-struct memory footprint: %lu bytes\n",
sizeof(struct held_lock) * MAX_LOCK_DEPTH);
extern unsigned int max_lockdep_depth;
extern unsigned int max_recursion_depth;
+extern unsigned int max_bfs_queue_depth;
+
#ifdef CONFIG_PROVE_LOCKING
extern unsigned long lockdep_count_forward_deps(struct lock_class *);
extern unsigned long lockdep_count_backward_deps(struct lock_class *);
static void *l_next(struct seq_file *m, void *v, loff_t *pos)
{
- struct lock_class *class;
-
- (*pos)++;
-
- if (v == SEQ_START_TOKEN)
- class = m->private;
- else {
- class = v;
-
- if (class->lock_entry.next != &all_lock_classes)
- class = list_entry(class->lock_entry.next,
- struct lock_class, lock_entry);
- else
- class = NULL;
- }
-
- return class;
+ return seq_list_next(v, &all_lock_classes, pos);
}
static void *l_start(struct seq_file *m, loff_t *pos)
{
- struct lock_class *class;
- loff_t i = 0;
-
- if (*pos == 0)
- return SEQ_START_TOKEN;
-
- list_for_each_entry(class, &all_lock_classes, lock_entry) {
- if (++i == *pos)
- return class;
- }
- return NULL;
+ return seq_list_start_head(&all_lock_classes, *pos);
}
static void l_stop(struct seq_file *m, void *v)
static int l_show(struct seq_file *m, void *v)
{
- struct lock_class *class = v;
+ struct lock_class *class = list_entry(v, struct lock_class, lock_entry);
struct lock_list *entry;
char usage[LOCK_USAGE_CHARS];
- if (v == SEQ_START_TOKEN) {
+ if (v == &all_lock_classes) {
seq_printf(m, "all lock classes:\n");
return 0;
}
static int lockdep_open(struct inode *inode, struct file *file)
{
- int res = seq_open(file, &lockdep_ops);
- if (!res) {
- struct seq_file *m = file->private_data;
-
- if (!list_empty(&all_lock_classes))
- m->private = list_entry(all_lock_classes.next,
- struct lock_class, lock_entry);
- else
- m->private = NULL;
- }
- return res;
+ return seq_open(file, &lockdep_ops);
}
static const struct file_operations proc_lockdep_operations = {
};
#ifdef CONFIG_PROVE_LOCKING
-static void *lc_next(struct seq_file *m, void *v, loff_t *pos)
-{
- struct lock_chain *chain;
-
- (*pos)++;
-
- if (v == SEQ_START_TOKEN)
- chain = m->private;
- else {
- chain = v;
-
- if (*pos < nr_lock_chains)
- chain = lock_chains + *pos;
- else
- chain = NULL;
- }
-
- return chain;
-}
-
static void *lc_start(struct seq_file *m, loff_t *pos)
{
if (*pos == 0)
return SEQ_START_TOKEN;
- if (*pos < nr_lock_chains)
- return lock_chains + *pos;
+ if (*pos - 1 < nr_lock_chains)
+ return lock_chains + (*pos - 1);
return NULL;
}
+static void *lc_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ (*pos)++;
+ return lc_start(m, pos);
+}
+
static void lc_stop(struct seq_file *m, void *v)
{
}
static int lockdep_chains_open(struct inode *inode, struct file *file)
{
- int res = seq_open(file, &lockdep_chains_ops);
- if (!res) {
- struct seq_file *m = file->private_data;
-
- if (nr_lock_chains)
- m->private = lock_chains;
- else
- m->private = NULL;
- }
- return res;
+ return seq_open(file, &lockdep_chains_ops);
}
static const struct file_operations proc_lockdep_chains_operations = {
debug_atomic_read(&chain_lookup_hits));
seq_printf(m, " cyclic checks: %11u\n",
debug_atomic_read(&nr_cyclic_checks));
- seq_printf(m, " cyclic-check recursions: %11u\n",
- debug_atomic_read(&nr_cyclic_check_recursions));
seq_printf(m, " find-mask forwards checks: %11u\n",
debug_atomic_read(&nr_find_usage_forwards_checks));
- seq_printf(m, " find-mask forwards recursions: %11u\n",
- debug_atomic_read(&nr_find_usage_forwards_recursions));
seq_printf(m, " find-mask backwards checks: %11u\n",
debug_atomic_read(&nr_find_usage_backwards_checks));
- seq_printf(m, " find-mask backwards recursions:%11u\n",
- debug_atomic_read(&nr_find_usage_backwards_recursions));
seq_printf(m, " hardirq on events: %11u\n", hi1);
seq_printf(m, " hardirq off events: %11u\n", hi2);
nr_unused);
seq_printf(m, " max locking depth: %11u\n",
max_lockdep_depth);
- seq_printf(m, " max recursion depth: %11u\n",
- max_recursion_depth);
+#ifdef CONFIG_PROVE_LOCKING
+ seq_printf(m, " max bfs queue depth: %11u\n",
+ max_bfs_queue_depth);
+#endif
lockdep_stats_debug_show(m);
seq_printf(m, " debug_locks: %11u\n",
debug_locks);
};
struct lock_stat_seq {
- struct lock_stat_data *iter;
struct lock_stat_data *iter_end;
struct lock_stat_data stats[MAX_LOCKDEP_KEYS];
};
static void *ls_start(struct seq_file *m, loff_t *pos)
{
struct lock_stat_seq *data = m->private;
+ struct lock_stat_data *iter;
if (*pos == 0)
return SEQ_START_TOKEN;
- data->iter = data->stats + *pos;
- if (data->iter >= data->iter_end)
- data->iter = NULL;
+ iter = data->stats + (*pos - 1);
+ if (iter >= data->iter_end)
+ iter = NULL;
- return data->iter;
+ return iter;
}
static void *ls_next(struct seq_file *m, void *v, loff_t *pos)
{
- struct lock_stat_seq *data = m->private;
-
(*pos)++;
-
- if (v == SEQ_START_TOKEN)
- data->iter = data->stats;
- else {
- data->iter = v;
- data->iter++;
- }
-
- if (data->iter == data->iter_end)
- data->iter = NULL;
-
- return data->iter;
+ return ls_start(m, pos);
}
static void ls_stop(struct seq_file *m, void *v)
struct lock_stat_data *iter = data->stats;
struct seq_file *m = file->private_data;
- data->iter = iter;
list_for_each_entry(class, &all_lock_classes, lock_entry) {
iter->class = class;
iter->stats = lock_stats(class);
}
data->iter_end = iter;
- sort(data->stats, data->iter_end - data->iter,
+ sort(data->stats, data->iter_end - data->stats,
sizeof(struct lock_stat_data),
lock_stat_cmp, NULL);
struct seq_file *seq = file->private_data;
vfree(seq->private);
- seq->private = NULL;
return seq_release(inode, file);
}
&proc_lockdep_stats_operations);
#ifdef CONFIG_LOCK_STAT
- proc_create("lock_stat", S_IRUSR, NULL, &proc_lock_stat_operations);
+ proc_create("lock_stat", S_IRUSR | S_IWUSR, NULL,
+ &proc_lock_stat_operations);
#endif
return 0;
}
EXPORT_SYMBOL(__symbol_put);
+/* Note this assumes addr is a function, which it currently always is. */
void symbol_put_addr(void *addr)
{
struct module *modaddr;
+ unsigned long a = (unsigned long)dereference_function_descriptor(addr);
- if (core_kernel_text((unsigned long)addr))
+ if (core_kernel_text(a))
return;
/* module_text_address is safe here: we're supposed to have reference
* to module from symbol_get, so it can't go away. */
- modaddr = __module_text_address((unsigned long)addr);
+ modaddr = __module_text_address(a);
BUG_ON(!modaddr);
module_put(modaddr);
}
{
const unsigned long *crc;
- if (!find_symbol("module_layout", NULL, &crc, true, false))
+ if (!find_symbol(MODULE_SYMBOL_PREFIX "module_layout", NULL,
+ &crc, true, false))
BUG();
return check_version(sechdrs, versindex, "module_layout", mod, crc);
}
struct module_notes_attrs *notes_attrs;
struct bin_attribute *nattr;
+ /* failed to create section attributes, so can't create notes */
+ if (!mod->sect_attrs)
+ return;
+
/* Count notes sections and allocate structures. */
notes = 0;
for (i = 0; i < nsect; i++)
*/
void oops_enter(void)
{
+ tracing_off();
/* can't trust the integrity of the kernel anymore: */
debug_locks_off();
do_oops_enter_exit();
static atomic_t nr_counters __read_mostly;
static atomic_t nr_mmap_counters __read_mostly;
static atomic_t nr_comm_counters __read_mostly;
+static atomic_t nr_task_counters __read_mostly;
/*
* perf counter paranoia level:
* 1 - disallow cpu counters to unpriv
* 2 - disallow kernel profiling to unpriv
*/
-int sysctl_perf_counter_paranoid __read_mostly;
+int sysctl_perf_counter_paranoid __read_mostly = 1;
static inline bool perf_paranoid_cpu(void)
{
void __weak hw_perf_enable(void) { barrier(); }
void __weak hw_perf_counter_setup(int cpu) { barrier(); }
+void __weak hw_perf_counter_setup_online(int cpu) { barrier(); }
int __weak
hw_perf_group_sched_in(struct perf_counter *group_leader,
}
}
+static void unclone_ctx(struct perf_counter_context *ctx)
+{
+ if (ctx->parent_ctx) {
+ put_ctx(ctx->parent_ctx);
+ ctx->parent_ctx = NULL;
+ }
+}
+
+/*
+ * If we inherit counters we want to return the parent counter id
+ * to userspace.
+ */
+static u64 primary_counter_id(struct perf_counter *counter)
+{
+ u64 id = counter->id;
+
+ if (counter->parent)
+ id = counter->parent->id;
+
+ return id;
+}
+
/*
* Get the perf_counter_context for a task and lock it.
* This has to cope with with the fact that until it is locked,
return;
counter->state = PERF_COUNTER_STATE_INACTIVE;
+ if (counter->pending_disable) {
+ counter->pending_disable = 0;
+ counter->state = PERF_COUNTER_STATE_OFF;
+ }
counter->tstamp_stopped = ctx->time;
counter->pmu->disable(counter);
counter->oncpu = -1;
__perf_counter_sync_stat(counter, next_counter);
counter = list_next_entry(counter, event_entry);
- next_counter = list_next_entry(counter, event_entry);
+ next_counter = list_next_entry(next_counter, event_entry);
}
}
#define MAX_INTERRUPTS (~0ULL)
static void perf_log_throttle(struct perf_counter *counter, int enable);
-static void perf_log_period(struct perf_counter *counter, u64 period);
static void perf_adjust_period(struct perf_counter *counter, u64 events)
{
if (!sample_period)
sample_period = 1;
- perf_log_period(counter, sample_period);
-
hwc->sample_period = sample_period;
}
/*
* Unclone this context if we enabled any counter.
*/
- if (enabled && ctx->parent_ctx) {
- put_ctx(ctx->parent_ctx);
- ctx->parent_ctx = NULL;
- }
+ if (enabled)
+ unclone_ctx(ctx);
spin_unlock(&ctx->lock);
*/
static void __perf_counter_read(void *info)
{
+ struct perf_cpu_context *cpuctx = &__get_cpu_var(perf_cpu_context);
struct perf_counter *counter = info;
struct perf_counter_context *ctx = counter->ctx;
unsigned long flags;
+ /*
+ * If this is a task context, we need to check whether it is
+ * the current task context of this cpu. If not it has been
+ * scheduled out before the smp call arrived. In that case
+ * counter->count would have been updated to a recent sample
+ * when the counter was scheduled out.
+ */
+ if (ctx->task && cpuctx->task_ctx != ctx)
+ return;
+
local_irq_save(flags);
if (ctx->is_active)
update_context_time(ctx);
static struct perf_counter_context *find_get_context(pid_t pid, int cpu)
{
- struct perf_counter_context *parent_ctx;
struct perf_counter_context *ctx;
struct perf_cpu_context *cpuctx;
struct task_struct *task;
retry:
ctx = perf_lock_task_context(task, &flags);
if (ctx) {
- parent_ctx = ctx->parent_ctx;
- if (parent_ctx) {
- put_ctx(parent_ctx);
- ctx->parent_ctx = NULL; /* no longer a clone */
- }
+ unclone_ctx(ctx);
spin_unlock_irqrestore(&ctx->lock, flags);
}
atomic_dec(&nr_mmap_counters);
if (counter->attr.comm)
atomic_dec(&nr_comm_counters);
+ if (counter->attr.task)
+ atomic_dec(&nr_task_counters);
}
if (counter->destroy)
return 0;
}
+static int perf_counter_read_size(struct perf_counter *counter)
+{
+ int entry = sizeof(u64); /* value */
+ int size = 0;
+ int nr = 1;
+
+ if (counter->attr.read_format & PERF_FORMAT_TOTAL_TIME_ENABLED)
+ size += sizeof(u64);
+
+ if (counter->attr.read_format & PERF_FORMAT_TOTAL_TIME_RUNNING)
+ size += sizeof(u64);
+
+ if (counter->attr.read_format & PERF_FORMAT_ID)
+ entry += sizeof(u64);
+
+ if (counter->attr.read_format & PERF_FORMAT_GROUP) {
+ nr += counter->group_leader->nr_siblings;
+ size += sizeof(u64);
+ }
+
+ size += entry * nr;
+
+ return size;
+}
+
+static u64 perf_counter_read_value(struct perf_counter *counter)
+{
+ struct perf_counter *child;
+ u64 total = 0;
+
+ total += perf_counter_read(counter);
+ list_for_each_entry(child, &counter->child_list, child_list)
+ total += perf_counter_read(child);
+
+ return total;
+}
+
+static int perf_counter_read_entry(struct perf_counter *counter,
+ u64 read_format, char __user *buf)
+{
+ int n = 0, count = 0;
+ u64 values[2];
+
+ values[n++] = perf_counter_read_value(counter);
+ if (read_format & PERF_FORMAT_ID)
+ values[n++] = primary_counter_id(counter);
+
+ count = n * sizeof(u64);
+
+ if (copy_to_user(buf, values, count))
+ return -EFAULT;
+
+ return count;
+}
+
+static int perf_counter_read_group(struct perf_counter *counter,
+ u64 read_format, char __user *buf)
+{
+ struct perf_counter *leader = counter->group_leader, *sub;
+ int n = 0, size = 0, err = -EFAULT;
+ u64 values[3];
+
+ values[n++] = 1 + leader->nr_siblings;
+ if (read_format & PERF_FORMAT_TOTAL_TIME_ENABLED) {
+ values[n++] = leader->total_time_enabled +
+ atomic64_read(&leader->child_total_time_enabled);
+ }
+ if (read_format & PERF_FORMAT_TOTAL_TIME_RUNNING) {
+ values[n++] = leader->total_time_running +
+ atomic64_read(&leader->child_total_time_running);
+ }
+
+ size = n * sizeof(u64);
+
+ if (copy_to_user(buf, values, size))
+ return -EFAULT;
+
+ err = perf_counter_read_entry(leader, read_format, buf + size);
+ if (err < 0)
+ return err;
+
+ size += err;
+
+ list_for_each_entry(sub, &leader->sibling_list, list_entry) {
+ err = perf_counter_read_entry(sub, read_format,
+ buf + size);
+ if (err < 0)
+ return err;
+
+ size += err;
+ }
+
+ return size;
+}
+
+static int perf_counter_read_one(struct perf_counter *counter,
+ u64 read_format, char __user *buf)
+{
+ u64 values[4];
+ int n = 0;
+
+ values[n++] = perf_counter_read_value(counter);
+ if (read_format & PERF_FORMAT_TOTAL_TIME_ENABLED) {
+ values[n++] = counter->total_time_enabled +
+ atomic64_read(&counter->child_total_time_enabled);
+ }
+ if (read_format & PERF_FORMAT_TOTAL_TIME_RUNNING) {
+ values[n++] = counter->total_time_running +
+ atomic64_read(&counter->child_total_time_running);
+ }
+ if (read_format & PERF_FORMAT_ID)
+ values[n++] = primary_counter_id(counter);
+
+ if (copy_to_user(buf, values, n * sizeof(u64)))
+ return -EFAULT;
+
+ return n * sizeof(u64);
+}
+
/*
* Read the performance counter - simple non blocking version for now
*/
static ssize_t
perf_read_hw(struct perf_counter *counter, char __user *buf, size_t count)
{
- u64 values[4];
- int n;
+ u64 read_format = counter->attr.read_format;
+ int ret;
/*
* Return end-of-file for a read on a counter that is in
if (counter->state == PERF_COUNTER_STATE_ERROR)
return 0;
+ if (count < perf_counter_read_size(counter))
+ return -ENOSPC;
+
WARN_ON_ONCE(counter->ctx->parent_ctx);
mutex_lock(&counter->child_mutex);
- values[0] = perf_counter_read(counter);
- n = 1;
- if (counter->attr.read_format & PERF_FORMAT_TOTAL_TIME_ENABLED)
- values[n++] = counter->total_time_enabled +
- atomic64_read(&counter->child_total_time_enabled);
- if (counter->attr.read_format & PERF_FORMAT_TOTAL_TIME_RUNNING)
- values[n++] = counter->total_time_running +
- atomic64_read(&counter->child_total_time_running);
- if (counter->attr.read_format & PERF_FORMAT_ID)
- values[n++] = counter->id;
+ if (read_format & PERF_FORMAT_GROUP)
+ ret = perf_counter_read_group(counter, read_format, buf);
+ else
+ ret = perf_counter_read_one(counter, read_format, buf);
mutex_unlock(&counter->child_mutex);
- if (count < n * sizeof(u64))
- return -EINVAL;
- count = n * sizeof(u64);
-
- if (copy_to_user(buf, values, count))
- return -EFAULT;
-
- return count;
+ return ret;
}
static ssize_t
counter->attr.sample_freq = value;
} else {
- perf_log_period(counter, value);
-
counter->attr.sample_period = value;
counter->hw.sample_period = value;
}
return 0;
}
+#ifndef PERF_COUNTER_INDEX_OFFSET
+# define PERF_COUNTER_INDEX_OFFSET 0
+#endif
+
static int perf_counter_index(struct perf_counter *counter)
{
if (counter->state != PERF_COUNTER_STATE_ACTIVE)
if (counter->pending_disable) {
counter->pending_disable = 0;
- perf_counter_disable(counter);
+ __perf_counter_disable(counter);
}
if (counter->pending_wakeup) {
return task_pid_nr_ns(p, counter->ns);
}
-static void perf_counter_output(struct perf_counter *counter, int nmi,
+static void perf_output_read_one(struct perf_output_handle *handle,
+ struct perf_counter *counter)
+{
+ u64 read_format = counter->attr.read_format;
+ u64 values[4];
+ int n = 0;
+
+ values[n++] = atomic64_read(&counter->count);
+ if (read_format & PERF_FORMAT_TOTAL_TIME_ENABLED) {
+ values[n++] = counter->total_time_enabled +
+ atomic64_read(&counter->child_total_time_enabled);
+ }
+ if (read_format & PERF_FORMAT_TOTAL_TIME_RUNNING) {
+ values[n++] = counter->total_time_running +
+ atomic64_read(&counter->child_total_time_running);
+ }
+ if (read_format & PERF_FORMAT_ID)
+ values[n++] = primary_counter_id(counter);
+
+ perf_output_copy(handle, values, n * sizeof(u64));
+}
+
+/*
+ * XXX PERF_FORMAT_GROUP vs inherited counters seems difficult.
+ */
+static void perf_output_read_group(struct perf_output_handle *handle,
+ struct perf_counter *counter)
+{
+ struct perf_counter *leader = counter->group_leader, *sub;
+ u64 read_format = counter->attr.read_format;
+ u64 values[5];
+ int n = 0;
+
+ values[n++] = 1 + leader->nr_siblings;
+
+ if (read_format & PERF_FORMAT_TOTAL_TIME_ENABLED)
+ values[n++] = leader->total_time_enabled;
+
+ if (read_format & PERF_FORMAT_TOTAL_TIME_RUNNING)
+ values[n++] = leader->total_time_running;
+
+ if (leader != counter)
+ leader->pmu->read(leader);
+
+ values[n++] = atomic64_read(&leader->count);
+ if (read_format & PERF_FORMAT_ID)
+ values[n++] = primary_counter_id(leader);
+
+ perf_output_copy(handle, values, n * sizeof(u64));
+
+ list_for_each_entry(sub, &leader->sibling_list, list_entry) {
+ n = 0;
+
+ if (sub != counter)
+ sub->pmu->read(sub);
+
+ values[n++] = atomic64_read(&sub->count);
+ if (read_format & PERF_FORMAT_ID)
+ values[n++] = primary_counter_id(sub);
+
+ perf_output_copy(handle, values, n * sizeof(u64));
+ }
+}
+
+static void perf_output_read(struct perf_output_handle *handle,
+ struct perf_counter *counter)
+{
+ if (counter->attr.read_format & PERF_FORMAT_GROUP)
+ perf_output_read_group(handle, counter);
+ else
+ perf_output_read_one(handle, counter);
+}
+
+void perf_counter_output(struct perf_counter *counter, int nmi,
struct perf_sample_data *data)
{
int ret;
struct {
u32 pid, tid;
} tid_entry;
- struct {
- u64 id;
- u64 counter;
- } group_entry;
struct perf_callchain_entry *callchain = NULL;
int callchain_size = 0;
u64 time;
if (sample_type & PERF_SAMPLE_ID)
header.size += sizeof(u64);
+ if (sample_type & PERF_SAMPLE_STREAM_ID)
+ header.size += sizeof(u64);
+
if (sample_type & PERF_SAMPLE_CPU) {
header.size += sizeof(cpu_entry);
cpu_entry.cpu = raw_smp_processor_id();
+ cpu_entry.reserved = 0;
}
if (sample_type & PERF_SAMPLE_PERIOD)
header.size += sizeof(u64);
- if (sample_type & PERF_SAMPLE_GROUP) {
- header.size += sizeof(u64) +
- counter->nr_siblings * sizeof(group_entry);
- }
+ if (sample_type & PERF_SAMPLE_READ)
+ header.size += perf_counter_read_size(counter);
if (sample_type & PERF_SAMPLE_CALLCHAIN) {
callchain = perf_callchain(data->regs);
header.size += sizeof(u64);
}
+ if (sample_type & PERF_SAMPLE_RAW) {
+ int size = sizeof(u32);
+
+ if (data->raw)
+ size += data->raw->size;
+ else
+ size += sizeof(u32);
+
+ WARN_ON_ONCE(size & (sizeof(u64)-1));
+ header.size += size;
+ }
+
ret = perf_output_begin(&handle, counter, header.size, nmi, 1);
if (ret)
return;
if (sample_type & PERF_SAMPLE_ADDR)
perf_output_put(&handle, data->addr);
- if (sample_type & PERF_SAMPLE_ID)
+ if (sample_type & PERF_SAMPLE_ID) {
+ u64 id = primary_counter_id(counter);
+
+ perf_output_put(&handle, id);
+ }
+
+ if (sample_type & PERF_SAMPLE_STREAM_ID)
perf_output_put(&handle, counter->id);
if (sample_type & PERF_SAMPLE_CPU)
if (sample_type & PERF_SAMPLE_PERIOD)
perf_output_put(&handle, data->period);
- /*
- * XXX PERF_SAMPLE_GROUP vs inherited counters seems difficult.
- */
- if (sample_type & PERF_SAMPLE_GROUP) {
- struct perf_counter *leader, *sub;
- u64 nr = counter->nr_siblings;
-
- perf_output_put(&handle, nr);
-
- leader = counter->group_leader;
- list_for_each_entry(sub, &leader->sibling_list, list_entry) {
- if (sub != counter)
- sub->pmu->read(sub);
-
- group_entry.id = sub->id;
- group_entry.counter = atomic64_read(&sub->count);
-
- perf_output_put(&handle, group_entry);
- }
- }
+ if (sample_type & PERF_SAMPLE_READ)
+ perf_output_read(&handle, counter);
if (sample_type & PERF_SAMPLE_CALLCHAIN) {
if (callchain)
}
}
+ if (sample_type & PERF_SAMPLE_RAW) {
+ if (data->raw) {
+ perf_output_put(&handle, data->raw->size);
+ perf_output_copy(&handle, data->raw->data, data->raw->size);
+ } else {
+ struct {
+ u32 size;
+ u32 data;
+ } raw = {
+ .size = sizeof(u32),
+ .data = 0,
+ };
+ perf_output_put(&handle, raw);
+ }
+ }
+
perf_output_end(&handle);
}
u32 pid;
u32 tid;
- u64 value;
- u64 format[3];
};
static void
.header = {
.type = PERF_EVENT_READ,
.misc = 0,
- .size = sizeof(event) - sizeof(event.format),
+ .size = sizeof(event) + perf_counter_read_size(counter),
},
.pid = perf_counter_pid(counter, task),
.tid = perf_counter_tid(counter, task),
- .value = atomic64_read(&counter->count),
};
- int ret, i = 0;
-
- if (counter->attr.read_format & PERF_FORMAT_TOTAL_TIME_ENABLED) {
- event.header.size += sizeof(u64);
- event.format[i++] = counter->total_time_enabled;
- }
-
- if (counter->attr.read_format & PERF_FORMAT_TOTAL_TIME_RUNNING) {
- event.header.size += sizeof(u64);
- event.format[i++] = counter->total_time_running;
- }
-
- if (counter->attr.read_format & PERF_FORMAT_ID) {
- u64 id;
-
- event.header.size += sizeof(u64);
- if (counter->parent)
- id = counter->parent->id;
- else
- id = counter->id;
-
- event.format[i++] = id;
- }
+ int ret;
ret = perf_output_begin(&handle, counter, event.header.size, 0, 0);
if (ret)
return;
- perf_output_copy(&handle, &event, event.header.size);
+ perf_output_put(&handle, event);
+ perf_output_read(&handle, counter);
+
perf_output_end(&handle);
}
/*
- * fork tracking
+ * task tracking -- fork/exit
+ *
+ * enabled by: attr.comm | attr.mmap | attr.task
*/
-struct perf_fork_event {
- struct task_struct *task;
+struct perf_task_event {
+ struct task_struct *task;
+ struct perf_counter_context *task_ctx;
struct {
struct perf_event_header header;
u32 pid;
u32 ppid;
+ u32 tid;
+ u32 ptid;
} event;
};
-static void perf_counter_fork_output(struct perf_counter *counter,
- struct perf_fork_event *fork_event)
+static void perf_counter_task_output(struct perf_counter *counter,
+ struct perf_task_event *task_event)
{
struct perf_output_handle handle;
- int size = fork_event->event.header.size;
- struct task_struct *task = fork_event->task;
+ int size = task_event->event.header.size;
+ struct task_struct *task = task_event->task;
int ret = perf_output_begin(&handle, counter, size, 0, 0);
if (ret)
return;
- fork_event->event.pid = perf_counter_pid(counter, task);
- fork_event->event.ppid = perf_counter_pid(counter, task->real_parent);
+ task_event->event.pid = perf_counter_pid(counter, task);
+ task_event->event.ppid = perf_counter_pid(counter, current);
- perf_output_put(&handle, fork_event->event);
+ task_event->event.tid = perf_counter_tid(counter, task);
+ task_event->event.ptid = perf_counter_tid(counter, current);
+
+ perf_output_put(&handle, task_event->event);
perf_output_end(&handle);
}
-static int perf_counter_fork_match(struct perf_counter *counter)
+static int perf_counter_task_match(struct perf_counter *counter)
{
- if (counter->attr.comm || counter->attr.mmap)
+ if (counter->attr.comm || counter->attr.mmap || counter->attr.task)
return 1;
return 0;
}
-static void perf_counter_fork_ctx(struct perf_counter_context *ctx,
- struct perf_fork_event *fork_event)
+static void perf_counter_task_ctx(struct perf_counter_context *ctx,
+ struct perf_task_event *task_event)
{
struct perf_counter *counter;
rcu_read_lock();
list_for_each_entry_rcu(counter, &ctx->event_list, event_entry) {
- if (perf_counter_fork_match(counter))
- perf_counter_fork_output(counter, fork_event);
+ if (perf_counter_task_match(counter))
+ perf_counter_task_output(counter, task_event);
}
rcu_read_unlock();
}
-static void perf_counter_fork_event(struct perf_fork_event *fork_event)
+static void perf_counter_task_event(struct perf_task_event *task_event)
{
struct perf_cpu_context *cpuctx;
- struct perf_counter_context *ctx;
+ struct perf_counter_context *ctx = task_event->task_ctx;
cpuctx = &get_cpu_var(perf_cpu_context);
- perf_counter_fork_ctx(&cpuctx->ctx, fork_event);
+ perf_counter_task_ctx(&cpuctx->ctx, task_event);
put_cpu_var(perf_cpu_context);
rcu_read_lock();
- /*
- * doesn't really matter which of the child contexts the
- * events ends up in.
- */
- ctx = rcu_dereference(current->perf_counter_ctxp);
+ if (!ctx)
+ ctx = rcu_dereference(task_event->task->perf_counter_ctxp);
if (ctx)
- perf_counter_fork_ctx(ctx, fork_event);
+ perf_counter_task_ctx(ctx, task_event);
rcu_read_unlock();
}
-void perf_counter_fork(struct task_struct *task)
+static void perf_counter_task(struct task_struct *task,
+ struct perf_counter_context *task_ctx,
+ int new)
{
- struct perf_fork_event fork_event;
+ struct perf_task_event task_event;
if (!atomic_read(&nr_comm_counters) &&
- !atomic_read(&nr_mmap_counters))
+ !atomic_read(&nr_mmap_counters) &&
+ !atomic_read(&nr_task_counters))
return;
- fork_event = (struct perf_fork_event){
- .task = task,
- .event = {
+ task_event = (struct perf_task_event){
+ .task = task,
+ .task_ctx = task_ctx,
+ .event = {
.header = {
- .type = PERF_EVENT_FORK,
- .size = sizeof(fork_event.event),
+ .type = new ? PERF_EVENT_FORK : PERF_EVENT_EXIT,
+ .misc = 0,
+ .size = sizeof(task_event.event),
},
+ /* .pid */
+ /* .ppid */
+ /* .tid */
+ /* .ptid */
},
};
- perf_counter_fork_event(&fork_event);
+ perf_counter_task_event(&task_event);
+}
+
+void perf_counter_fork(struct task_struct *task)
+{
+ perf_counter_task(task, NULL, 1);
}
/*
struct perf_cpu_context *cpuctx;
struct perf_counter_context *ctx;
unsigned int size;
- char *comm = comm_event->task->comm;
+ char comm[TASK_COMM_LEN];
+ memset(comm, 0, sizeof(comm));
+ strncpy(comm, comm_event->task->comm, sizeof(comm));
size = ALIGN(strlen(comm)+1, sizeof(u64));
comm_event->comm = comm;
comm_event = (struct perf_comm_event){
.task = task,
+ /* .comm */
+ /* .comm_size */
.event = {
- .header = { .type = PERF_EVENT_COMM, },
+ .header = {
+ .type = PERF_EVENT_COMM,
+ .misc = 0,
+ /* .size */
+ },
+ /* .pid */
+ /* .tid */
},
};
char *buf = NULL;
const char *name;
+ memset(tmp, 0, sizeof(tmp));
+
if (file) {
- buf = kzalloc(PATH_MAX, GFP_KERNEL);
+ /*
+ * d_path works from the end of the buffer backwards, so we
+ * need to add enough zero bytes after the string to handle
+ * the 64bit alignment we do later.
+ */
+ buf = kzalloc(PATH_MAX + sizeof(u64), GFP_KERNEL);
if (!buf) {
name = strncpy(tmp, "//enomem", sizeof(tmp));
goto got_name;
goto got_name;
}
} else {
- name = arch_vma_name(mmap_event->vma);
- if (name)
+ if (arch_vma_name(mmap_event->vma)) {
+ name = strncpy(tmp, arch_vma_name(mmap_event->vma),
+ sizeof(tmp));
goto got_name;
+ }
if (!vma->vm_mm) {
name = strncpy(tmp, "[vdso]", sizeof(tmp));
mmap_event = (struct perf_mmap_event){
.vma = vma,
+ /* .file_name */
+ /* .file_size */
.event = {
- .header = { .type = PERF_EVENT_MMAP, },
+ .header = {
+ .type = PERF_EVENT_MMAP,
+ .misc = 0,
+ /* .size */
+ },
+ /* .pid */
+ /* .tid */
.start = vma->vm_start,
.len = vma->vm_end - vma->vm_start,
.pgoff = vma->vm_pgoff,
perf_counter_mmap_event(&mmap_event);
}
-/*
- * Log sample_period changes so that analyzing tools can re-normalize the
- * event flow.
- */
-
-struct freq_event {
- struct perf_event_header header;
- u64 time;
- u64 id;
- u64 period;
-};
-
-static void perf_log_period(struct perf_counter *counter, u64 period)
-{
- struct perf_output_handle handle;
- struct freq_event event;
- int ret;
-
- if (counter->hw.sample_period == period)
- return;
-
- if (counter->attr.sample_type & PERF_SAMPLE_PERIOD)
- return;
-
- event = (struct freq_event) {
- .header = {
- .type = PERF_EVENT_PERIOD,
- .misc = 0,
- .size = sizeof(event),
- },
- .time = sched_clock(),
- .id = counter->id,
- .period = period,
- };
-
- ret = perf_output_begin(&handle, counter, sizeof(event), 1, 0);
- if (ret)
- return;
-
- perf_output_put(&handle, event);
- perf_output_end(&handle);
-}
-
/*
* IRQ throttle logging
*/
struct perf_event_header header;
u64 time;
u64 id;
+ u64 stream_id;
} throttle_event = {
.header = {
- .type = PERF_EVENT_THROTTLE + 1,
+ .type = PERF_EVENT_THROTTLE,
.misc = 0,
.size = sizeof(throttle_event),
},
- .time = sched_clock(),
- .id = counter->id,
+ .time = sched_clock(),
+ .id = primary_counter_id(counter),
+ .stream_id = counter->id,
};
+ if (enable)
+ throttle_event.header.type = PERF_EVENT_UNTHROTTLE;
+
ret = perf_output_begin(&handle, counter, sizeof(throttle_event), 1, 0);
if (ret)
return;
* Generic software counter infrastructure
*/
-static void perf_swcounter_update(struct perf_counter *counter)
+/*
+ * We directly increment counter->count and keep a second value in
+ * counter->hw.period_left to count intervals. This period counter
+ * is kept in the range [-sample_period, 0] so that we can use the
+ * sign as trigger.
+ */
+
+static u64 perf_swcounter_set_period(struct perf_counter *counter)
{
struct hw_perf_counter *hwc = &counter->hw;
- u64 prev, now;
- s64 delta;
+ u64 period = hwc->last_period;
+ u64 nr, offset;
+ s64 old, val;
+
+ hwc->last_period = hwc->sample_period;
again:
- prev = atomic64_read(&hwc->prev_count);
- now = atomic64_read(&hwc->count);
- if (atomic64_cmpxchg(&hwc->prev_count, prev, now) != prev)
- goto again;
+ old = val = atomic64_read(&hwc->period_left);
+ if (val < 0)
+ return 0;
- delta = now - prev;
+ nr = div64_u64(period + val, period);
+ offset = nr * period;
+ val -= offset;
+ if (atomic64_cmpxchg(&hwc->period_left, old, val) != old)
+ goto again;
- atomic64_add(delta, &counter->count);
- atomic64_sub(delta, &hwc->period_left);
+ return nr;
}
-static void perf_swcounter_set_period(struct perf_counter *counter)
+static void perf_swcounter_overflow(struct perf_counter *counter,
+ int nmi, struct perf_sample_data *data)
{
struct hw_perf_counter *hwc = &counter->hw;
- s64 left = atomic64_read(&hwc->period_left);
- s64 period = hwc->sample_period;
+ u64 overflow;
- if (unlikely(left <= -period)) {
- left = period;
- atomic64_set(&hwc->period_left, left);
- hwc->last_period = period;
- }
+ data->period = counter->hw.last_period;
+ overflow = perf_swcounter_set_period(counter);
- if (unlikely(left <= 0)) {
- left += period;
- atomic64_add(period, &hwc->period_left);
- hwc->last_period = period;
- }
+ if (hwc->interrupts == MAX_INTERRUPTS)
+ return;
- atomic64_set(&hwc->prev_count, -left);
- atomic64_set(&hwc->count, -left);
+ for (; overflow; overflow--) {
+ if (perf_counter_overflow(counter, nmi, data)) {
+ /*
+ * We inhibit the overflow from happening when
+ * hwc->interrupts == MAX_INTERRUPTS.
+ */
+ break;
+ }
+ }
}
-static enum hrtimer_restart perf_swcounter_hrtimer(struct hrtimer *hrtimer)
+static void perf_swcounter_unthrottle(struct perf_counter *counter)
{
- enum hrtimer_restart ret = HRTIMER_RESTART;
- struct perf_sample_data data;
- struct perf_counter *counter;
- u64 period;
-
- counter = container_of(hrtimer, struct perf_counter, hw.hrtimer);
- counter->pmu->read(counter);
-
- data.addr = 0;
- data.regs = get_irq_regs();
/*
- * In case we exclude kernel IPs or are somehow not in interrupt
- * context, provide the next best thing, the user IP.
+ * Nothing to do, we already reset hwc->interrupts.
*/
- if ((counter->attr.exclude_kernel || !data.regs) &&
- !counter->attr.exclude_user)
- data.regs = task_pt_regs(current);
+}
- if (data.regs) {
- if (perf_counter_overflow(counter, 0, &data))
- ret = HRTIMER_NORESTART;
- }
+static void perf_swcounter_add(struct perf_counter *counter, u64 nr,
+ int nmi, struct perf_sample_data *data)
+{
+ struct hw_perf_counter *hwc = &counter->hw;
- period = max_t(u64, 10000, counter->hw.sample_period);
- hrtimer_forward_now(hrtimer, ns_to_ktime(period));
+ atomic64_add(nr, &counter->count);
- return ret;
-}
+ if (!hwc->sample_period)
+ return;
-static void perf_swcounter_overflow(struct perf_counter *counter,
- int nmi, struct perf_sample_data *data)
-{
- data->period = counter->hw.last_period;
+ if (!data->regs)
+ return;
- perf_swcounter_update(counter);
- perf_swcounter_set_period(counter);
- if (perf_counter_overflow(counter, nmi, data))
- /* soft-disable the counter */
- ;
+ if (!atomic64_add_negative(nr, &hwc->period_left))
+ perf_swcounter_overflow(counter, nmi, data);
}
static int perf_swcounter_is_counting(struct perf_counter *counter)
{
- struct perf_counter_context *ctx;
- unsigned long flags;
- int count;
-
+ /*
+ * The counter is active, we're good!
+ */
if (counter->state == PERF_COUNTER_STATE_ACTIVE)
return 1;
+ /*
+ * The counter is off/error, not counting.
+ */
if (counter->state != PERF_COUNTER_STATE_INACTIVE)
return 0;
/*
- * If the counter is inactive, it could be just because
- * its task is scheduled out, or because it's in a group
- * which could not go on the PMU. We want to count in
- * the first case but not the second. If the context is
- * currently active then an inactive software counter must
- * be the second case. If it's not currently active then
- * we need to know whether the counter was active when the
- * context was last active, which we can determine by
- * comparing counter->tstamp_stopped with ctx->time.
- *
- * We are within an RCU read-side critical section,
- * which protects the existence of *ctx.
+ * The counter is inactive, if the context is active
+ * we're part of a group that didn't make it on the 'pmu',
+ * not counting.
*/
- ctx = counter->ctx;
- spin_lock_irqsave(&ctx->lock, flags);
- count = 1;
- /* Re-check state now we have the lock */
- if (counter->state < PERF_COUNTER_STATE_INACTIVE ||
- counter->ctx->is_active ||
- counter->tstamp_stopped < ctx->time)
- count = 0;
- spin_unlock_irqrestore(&ctx->lock, flags);
- return count;
+ if (counter->ctx->is_active)
+ return 0;
+
+ /*
+ * We're inactive and the context is too, this means the
+ * task is scheduled out, we're counting events that happen
+ * to us, like migration events.
+ */
+ return 1;
}
static int perf_swcounter_match(struct perf_counter *counter,
return 1;
}
-static void perf_swcounter_add(struct perf_counter *counter, u64 nr,
- int nmi, struct perf_sample_data *data)
-{
- int neg = atomic64_add_negative(nr, &counter->hw.count);
-
- if (counter->hw.sample_period && !neg && data->regs)
- perf_swcounter_overflow(counter, nmi, data);
-}
-
static void perf_swcounter_ctx_event(struct perf_counter_context *ctx,
enum perf_type_id type,
u32 event, u64 nr, int nmi,
static void perf_swcounter_read(struct perf_counter *counter)
{
- perf_swcounter_update(counter);
}
static int perf_swcounter_enable(struct perf_counter *counter)
{
- perf_swcounter_set_period(counter);
+ struct hw_perf_counter *hwc = &counter->hw;
+
+ if (hwc->sample_period) {
+ hwc->last_period = hwc->sample_period;
+ perf_swcounter_set_period(counter);
+ }
return 0;
}
static void perf_swcounter_disable(struct perf_counter *counter)
{
- perf_swcounter_update(counter);
}
static const struct pmu perf_ops_generic = {
.enable = perf_swcounter_enable,
.disable = perf_swcounter_disable,
.read = perf_swcounter_read,
+ .unthrottle = perf_swcounter_unthrottle,
};
+/*
+ * hrtimer based swcounter callback
+ */
+
+static enum hrtimer_restart perf_swcounter_hrtimer(struct hrtimer *hrtimer)
+{
+ enum hrtimer_restart ret = HRTIMER_RESTART;
+ struct perf_sample_data data;
+ struct perf_counter *counter;
+ u64 period;
+
+ counter = container_of(hrtimer, struct perf_counter, hw.hrtimer);
+ counter->pmu->read(counter);
+
+ data.addr = 0;
+ data.regs = get_irq_regs();
+ /*
+ * In case we exclude kernel IPs or are somehow not in interrupt
+ * context, provide the next best thing, the user IP.
+ */
+ if ((counter->attr.exclude_kernel || !data.regs) &&
+ !counter->attr.exclude_user)
+ data.regs = task_pt_regs(current);
+
+ if (data.regs) {
+ if (perf_counter_overflow(counter, 0, &data))
+ ret = HRTIMER_NORESTART;
+ }
+
+ period = max_t(u64, 10000, counter->hw.sample_period);
+ hrtimer_forward_now(hrtimer, ns_to_ktime(period));
+
+ return ret;
+}
+
/*
* Software counter: cpu wall time clock
*/
};
#ifdef CONFIG_EVENT_PROFILE
-void perf_tpcounter_event(int event_id)
+void perf_tpcounter_event(int event_id, u64 addr, u64 count, void *record,
+ int entry_size)
{
+ struct perf_raw_record raw = {
+ .size = entry_size,
+ .data = record,
+ };
+
struct perf_sample_data data = {
- .regs = get_irq_regs();
- .addr = 0,
+ .regs = get_irq_regs(),
+ .addr = addr,
+ .raw = &raw,
};
if (!data.regs)
data.regs = task_pt_regs(current);
- do_perf_swcounter_event(PERF_TYPE_TRACEPOINT, event_id, 1, 1, &data);
+ do_perf_swcounter_event(PERF_TYPE_TRACEPOINT, event_id, count, 1, &data);
}
EXPORT_SYMBOL_GPL(perf_tpcounter_event);
static void tp_perf_counter_destroy(struct perf_counter *counter)
{
- ftrace_profile_disable(perf_event_id(&counter->attr));
+ ftrace_profile_disable(counter->attr.config);
}
static const struct pmu *tp_perf_counter_init(struct perf_counter *counter)
{
- int event_id = perf_event_id(&counter->attr);
- int ret;
+ /*
+ * Raw tracepoint data is a severe data leak, only allow root to
+ * have these.
+ */
+ if ((counter->attr.sample_type & PERF_SAMPLE_RAW) &&
+ !capable(CAP_SYS_ADMIN))
+ return ERR_PTR(-EPERM);
- ret = ftrace_profile_enable(event_id);
- if (ret)
+ if (ftrace_profile_enable(counter->attr.config))
return NULL;
counter->destroy = tp_perf_counter_destroy;
hwc->sample_period = attr->sample_period;
if (attr->freq && attr->sample_freq)
hwc->sample_period = 1;
+ hwc->last_period = hwc->sample_period;
atomic64_set(&hwc->period_left, hwc->sample_period);
/*
- * we currently do not support PERF_SAMPLE_GROUP on inherited counters
+ * we currently do not support PERF_FORMAT_GROUP on inherited counters
*/
- if (attr->inherit && (attr->sample_type & PERF_SAMPLE_GROUP))
+ if (attr->inherit && (attr->read_format & PERF_FORMAT_GROUP))
goto done;
switch (attr->type) {
atomic_inc(&nr_mmap_counters);
if (counter->attr.comm)
atomic_inc(&nr_comm_counters);
+ if (counter->attr.task)
+ atomic_inc(&nr_task_counters);
}
return counter;
struct perf_counter_context *child_ctx;
unsigned long flags;
- if (likely(!child->perf_counter_ctxp))
+ if (likely(!child->perf_counter_ctxp)) {
+ perf_counter_task(child, NULL, 0);
return;
+ }
local_irq_save(flags);
/*
*/
spin_lock(&child_ctx->lock);
child->perf_counter_ctxp = NULL;
- if (child_ctx->parent_ctx) {
- /*
- * This context is a clone; unclone it so it can't get
- * swapped to another process while we're removing all
- * the counters from it.
- */
- put_ctx(child_ctx->parent_ctx);
- child_ctx->parent_ctx = NULL;
- }
- spin_unlock(&child_ctx->lock);
- local_irq_restore(flags);
+ /*
+ * If this context is a clone; unclone it so it can't get
+ * swapped to another process while we're removing all
+ * the counters from it.
+ */
+ unclone_ctx(child_ctx);
+ spin_unlock_irqrestore(&child_ctx->lock, flags);
+
+ /*
+ * Report the task dead after unscheduling the counters so that we
+ * won't get any samples after PERF_EVENT_EXIT. We can however still
+ * get a few PERF_EVENT_READ events.
+ */
+ perf_counter_task(child, child_ctx, 0);
/*
* We can recurse on the same lock type through:
perf_counter_init_cpu(cpu);
break;
+ case CPU_ONLINE:
+ case CPU_ONLINE_FROZEN:
+ hw_perf_counter_setup_online(cpu);
+ break;
+
case CPU_DOWN_PREPARE:
case CPU_DOWN_PREPARE_FROZEN:
perf_counter_exit_cpu(cpu);
{
perf_cpu_notify(&perf_cpu_nb, (unsigned long)CPU_UP_PREPARE,
(void *)(long)smp_processor_id());
+ perf_cpu_notify(&perf_cpu_nb, (unsigned long)CPU_ONLINE,
+ (void *)(long)smp_processor_id());
register_cpu_notifier(&perf_cpu_nb);
}
}
void posix_cpu_timers_exit_group(struct task_struct *tsk)
{
- struct task_cputime cputime;
+ struct signal_struct *const sig = tsk->signal;
- thread_group_cputimer(tsk, &cputime);
cleanup_timers(tsk->signal->cpu_timers,
- cputime.utime, cputime.stime, cputime.sum_exec_runtime);
+ cputime_add(tsk->utime, sig->utime),
+ cputime_add(tsk->stime, sig->stime),
+ tsk->se.sum_exec_runtime + sig->sum_sched_runtime);
}
static void clear_dead_task(struct k_itimer *timer, union cpu_time_count now)
return -EOPNOTSUPP;
}
+static int no_nsleep(const clockid_t which_clock, int flags,
+ struct timespec *tsave, struct timespec __user *rmtp)
+{
+ return -EOPNOTSUPP;
+}
+
/*
* Return nonzero if we know a priori this clockid_t value is bogus.
*/
.clock_get = posix_get_monotonic_raw,
.clock_set = do_posix_clock_nosettime,
.timer_create = no_timer_create,
+ .nsleep = no_nsleep,
};
register_posix_clock(CLOCK_REALTIME, &clock_realtime);
#include <asm/uaccess.h>
+/*
+ * for_each_console() allows you to iterate on each console
+ */
+#define for_each_console(con) \
+ for (con = console_drivers; con != NULL; con = con->next)
+
/*
* Architectures can override it:
*/
DEFAULT_CONSOLE_LOGLEVEL, /* default_console_loglevel */
};
+static int saved_console_loglevel = -1;
+
/*
* Low level drivers may need that to know if they can schedule in
* their unblank() callback or not. So let's export it.
logged_chars = 0;
break;
case 6: /* Disable logging to console */
+ if (saved_console_loglevel == -1)
+ saved_console_loglevel = console_loglevel;
console_loglevel = minimum_console_loglevel;
break;
case 7: /* Enable logging to console */
- console_loglevel = default_console_loglevel;
+ if (saved_console_loglevel != -1) {
+ console_loglevel = saved_console_loglevel;
+ saved_console_loglevel = -1;
+ }
break;
case 8: /* Set level of messages printed to console */
error = -EINVAL;
if (len < minimum_console_loglevel)
len = minimum_console_loglevel;
console_loglevel = len;
+ /* Implicitly re-enable logging to console */
+ saved_console_loglevel = -1;
error = 0;
break;
case 9: /* Number of chars in the log buffer */
{
struct console *con;
- for (con = console_drivers; con; con = con->next) {
+ for_each_console(con) {
if ((con->flags & CON_ENABLED) && con->write &&
(cpu_online(smp_processor_id()) ||
(con->flags & CON_ANYTIME)))
{
struct console *con;
- for (con = console_drivers; con; con = con->next)
+ for_each_console(con)
if (con->flags & CON_ANYTIME)
return 1;
console_locked = 1;
console_may_schedule = 0;
- for (c = console_drivers; c != NULL; c = c->next)
+ for_each_console(c)
if ((c->flags & CON_ENABLED) && c->unblank)
c->unblank();
release_console_sem();
struct tty_driver *driver = NULL;
acquire_console_sem();
- for (c = console_drivers; c != NULL; c = c->next) {
+ for_each_console(c) {
if (!c->device)
continue;
driver = c->device(c, index);
* to register the console printing procedure with printk() and to
* print any messages that were printed by the kernel before the
* console driver was initialized.
+ *
+ * This can happen pretty early during the boot process (because of
+ * early_printk) - sometimes before setup_arch() completes - be careful
+ * of what kernel features are used - they may not be initialised yet.
+ *
+ * There are two types of consoles - bootconsoles (early_printk) and
+ * "real" consoles (everything which is not a bootconsole) which are
+ * handled differently.
+ * - Any number of bootconsoles can be registered at any time.
+ * - As soon as a "real" console is registered, all bootconsoles
+ * will be unregistered automatically.
+ * - Once a "real" console is registered, any attempt to register a
+ * bootconsoles will be rejected
*/
-void register_console(struct console *console)
+void register_console(struct console *newcon)
{
int i;
unsigned long flags;
- struct console *bootconsole = NULL;
+ struct console *bcon = NULL;
- if (console_drivers) {
- if (console->flags & CON_BOOT)
- return;
- if (console_drivers->flags & CON_BOOT)
- bootconsole = console_drivers;
+ /*
+ * before we register a new CON_BOOT console, make sure we don't
+ * already have a valid console
+ */
+ if (console_drivers && newcon->flags & CON_BOOT) {
+ /* find the last or real console */
+ for_each_console(bcon) {
+ if (!(bcon->flags & CON_BOOT)) {
+ printk(KERN_INFO "Too late to register bootconsole %s%d\n",
+ newcon->name, newcon->index);
+ return;
+ }
+ }
}
- if (preferred_console < 0 || bootconsole || !console_drivers)
+ if (console_drivers && console_drivers->flags & CON_BOOT)
+ bcon = console_drivers;
+
+ if (preferred_console < 0 || bcon || !console_drivers)
preferred_console = selected_console;
- if (console->early_setup)
- console->early_setup();
+ if (newcon->early_setup)
+ newcon->early_setup();
/*
* See if we want to use this console driver. If we
* that registers here.
*/
if (preferred_console < 0) {
- if (console->index < 0)
- console->index = 0;
- if (console->setup == NULL ||
- console->setup(console, NULL) == 0) {
- console->flags |= CON_ENABLED;
- if (console->device) {
- console->flags |= CON_CONSDEV;
+ if (newcon->index < 0)
+ newcon->index = 0;
+ if (newcon->setup == NULL ||
+ newcon->setup(newcon, NULL) == 0) {
+ newcon->flags |= CON_ENABLED;
+ if (newcon->device) {
+ newcon->flags |= CON_CONSDEV;
preferred_console = 0;
}
}
*/
for (i = 0; i < MAX_CMDLINECONSOLES && console_cmdline[i].name[0];
i++) {
- if (strcmp(console_cmdline[i].name, console->name) != 0)
+ if (strcmp(console_cmdline[i].name, newcon->name) != 0)
continue;
- if (console->index >= 0 &&
- console->index != console_cmdline[i].index)
+ if (newcon->index >= 0 &&
+ newcon->index != console_cmdline[i].index)
continue;
- if (console->index < 0)
- console->index = console_cmdline[i].index;
+ if (newcon->index < 0)
+ newcon->index = console_cmdline[i].index;
#ifdef CONFIG_A11Y_BRAILLE_CONSOLE
if (console_cmdline[i].brl_options) {
- console->flags |= CON_BRL;
- braille_register_console(console,
+ newcon->flags |= CON_BRL;
+ braille_register_console(newcon,
console_cmdline[i].index,
console_cmdline[i].options,
console_cmdline[i].brl_options);
return;
}
#endif
- if (console->setup &&
- console->setup(console, console_cmdline[i].options) != 0)
+ if (newcon->setup &&
+ newcon->setup(newcon, console_cmdline[i].options) != 0)
break;
- console->flags |= CON_ENABLED;
- console->index = console_cmdline[i].index;
+ newcon->flags |= CON_ENABLED;
+ newcon->index = console_cmdline[i].index;
if (i == selected_console) {
- console->flags |= CON_CONSDEV;
+ newcon->flags |= CON_CONSDEV;
preferred_console = selected_console;
}
break;
}
- if (!(console->flags & CON_ENABLED))
+ if (!(newcon->flags & CON_ENABLED))
return;
- if (bootconsole && (console->flags & CON_CONSDEV)) {
- printk(KERN_INFO "console handover: boot [%s%d] -> real [%s%d]\n",
- bootconsole->name, bootconsole->index,
- console->name, console->index);
- unregister_console(bootconsole);
- console->flags &= ~CON_PRINTBUFFER;
- } else {
- printk(KERN_INFO "console [%s%d] enabled\n",
- console->name, console->index);
- }
+ /*
+ * If we have a bootconsole, and are switching to a real console,
+ * don't print everything out again, since when the boot console, and
+ * the real console are the same physical device, it's annoying to
+ * see the beginning boot messages twice
+ */
+ if (bcon && ((newcon->flags & (CON_CONSDEV | CON_BOOT)) == CON_CONSDEV))
+ newcon->flags &= ~CON_PRINTBUFFER;
/*
* Put this console in the list - keep the
* preferred driver at the head of the list.
*/
acquire_console_sem();
- if ((console->flags & CON_CONSDEV) || console_drivers == NULL) {
- console->next = console_drivers;
- console_drivers = console;
- if (console->next)
- console->next->flags &= ~CON_CONSDEV;
+ if ((newcon->flags & CON_CONSDEV) || console_drivers == NULL) {
+ newcon->next = console_drivers;
+ console_drivers = newcon;
+ if (newcon->next)
+ newcon->next->flags &= ~CON_CONSDEV;
} else {
- console->next = console_drivers->next;
- console_drivers->next = console;
+ newcon->next = console_drivers->next;
+ console_drivers->next = newcon;
}
- if (console->flags & CON_PRINTBUFFER) {
+ if (newcon->flags & CON_PRINTBUFFER) {
/*
* release_console_sem() will print out the buffered messages
* for us.
spin_unlock_irqrestore(&logbuf_lock, flags);
}
release_console_sem();
+
+ /*
+ * By unregistering the bootconsoles after we enable the real console
+ * we get the "console xxx enabled" message on all the consoles -
+ * boot consoles, real consoles, etc - this is to ensure that end
+ * users know there might be something in the kernel's log buffer that
+ * went to the bootconsole (that they do not see on the real console)
+ */
+ if (bcon && ((newcon->flags & (CON_CONSDEV | CON_BOOT)) == CON_CONSDEV)) {
+ /* we need to iterate through twice, to make sure we print
+ * everything out, before we unregister the console(s)
+ */
+ printk(KERN_INFO "console [%s%d] enabled, bootconsole disabled\n",
+ newcon->name, newcon->index);
+ for_each_console(bcon)
+ if (bcon->flags & CON_BOOT)
+ unregister_console(bcon);
+ } else {
+ printk(KERN_INFO "%sconsole [%s%d] enabled\n",
+ (newcon->flags & CON_BOOT) ? "boot" : "" ,
+ newcon->name, newcon->index);
+ }
}
EXPORT_SYMBOL(register_console);
static int __init disable_boot_consoles(void)
{
- if (console_drivers != NULL) {
- if (console_drivers->flags & CON_BOOT) {
+ struct console *con;
+
+ for_each_console(con) {
+ if (con->flags & CON_BOOT) {
printk(KERN_INFO "turn off boot console %s%d\n",
- console_drivers->name, console_drivers->index);
- return unregister_console(console_drivers);
+ con->name, con->index);
+ unregister_console(con);
}
}
return 0;
cpumask_copy(prof_cpu_mask, cpu_possible_mask);
- prof_buffer = kzalloc(buffer_bytes, GFP_KERNEL);
+ prof_buffer = kzalloc(buffer_bytes, GFP_KERNEL|__GFP_NOWARN);
if (prof_buffer)
return 0;
- prof_buffer = alloc_pages_exact(buffer_bytes, GFP_KERNEL|__GFP_ZERO);
+ prof_buffer = alloc_pages_exact(buffer_bytes,
+ GFP_KERNEL|__GFP_ZERO|__GFP_NOWARN);
if (prof_buffer)
return 0;
if (!dumpable && !capable(CAP_SYS_PTRACE))
return -EPERM;
- return security_ptrace_may_access(task, mode);
+ return security_ptrace_access_check(task, mode);
}
bool ptrace_may_access(struct task_struct *task, unsigned int mode)
+++ /dev/null
-/*
- * Read-Copy Update mechanism for mutual exclusion
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright IBM Corporation, 2001
- *
- * Authors: Dipankar Sarma <dipankar@in.ibm.com>
- * Manfred Spraul <manfred@colorfullife.com>
- *
- * Based on the original work by Paul McKenney <paulmck@us.ibm.com>
- * and inputs from Rusty Russell, Andrea Arcangeli and Andi Kleen.
- * Papers:
- * http://www.rdrop.com/users/paulmck/paper/rclockpdcsproof.pdf
- * http://lse.sourceforge.net/locking/rclock_OLS.2001.05.01c.sc.pdf (OLS2001)
- *
- * For detailed explanation of Read-Copy Update mechanism see -
- * Documentation/RCU
- *
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/smp.h>
-#include <linux/rcupdate.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <asm/atomic.h>
-#include <linux/bitops.h>
-#include <linux/module.h>
-#include <linux/completion.h>
-#include <linux/moduleparam.h>
-#include <linux/percpu.h>
-#include <linux/notifier.h>
-#include <linux/cpu.h>
-#include <linux/mutex.h>
-#include <linux/time.h>
-
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-static struct lock_class_key rcu_lock_key;
-struct lockdep_map rcu_lock_map =
- STATIC_LOCKDEP_MAP_INIT("rcu_read_lock", &rcu_lock_key);
-EXPORT_SYMBOL_GPL(rcu_lock_map);
-#endif
-
-
-/* Definition for rcupdate control block. */
-static struct rcu_ctrlblk rcu_ctrlblk = {
- .cur = -300,
- .completed = -300,
- .pending = -300,
- .lock = __SPIN_LOCK_UNLOCKED(&rcu_ctrlblk.lock),
- .cpumask = CPU_BITS_NONE,
-};
-
-static struct rcu_ctrlblk rcu_bh_ctrlblk = {
- .cur = -300,
- .completed = -300,
- .pending = -300,
- .lock = __SPIN_LOCK_UNLOCKED(&rcu_bh_ctrlblk.lock),
- .cpumask = CPU_BITS_NONE,
-};
-
-static DEFINE_PER_CPU(struct rcu_data, rcu_data);
-static DEFINE_PER_CPU(struct rcu_data, rcu_bh_data);
-
-/*
- * Increment the quiescent state counter.
- * The counter is a bit degenerated: We do not need to know
- * how many quiescent states passed, just if there was at least
- * one since the start of the grace period. Thus just a flag.
- */
-void rcu_qsctr_inc(int cpu)
-{
- struct rcu_data *rdp = &per_cpu(rcu_data, cpu);
- rdp->passed_quiesc = 1;
-}
-
-void rcu_bh_qsctr_inc(int cpu)
-{
- struct rcu_data *rdp = &per_cpu(rcu_bh_data, cpu);
- rdp->passed_quiesc = 1;
-}
-
-static int blimit = 10;
-static int qhimark = 10000;
-static int qlowmark = 100;
-
-#ifdef CONFIG_SMP
-static void force_quiescent_state(struct rcu_data *rdp,
- struct rcu_ctrlblk *rcp)
-{
- int cpu;
- unsigned long flags;
-
- set_need_resched();
- spin_lock_irqsave(&rcp->lock, flags);
- if (unlikely(!rcp->signaled)) {
- rcp->signaled = 1;
- /*
- * Don't send IPI to itself. With irqs disabled,
- * rdp->cpu is the current cpu.
- *
- * cpu_online_mask is updated by the _cpu_down()
- * using __stop_machine(). Since we're in irqs disabled
- * section, __stop_machine() is not exectuting, hence
- * the cpu_online_mask is stable.
- *
- * However, a cpu might have been offlined _just_ before
- * we disabled irqs while entering here.
- * And rcu subsystem might not yet have handled the CPU_DEAD
- * notification, leading to the offlined cpu's bit
- * being set in the rcp->cpumask.
- *
- * Hence cpumask = (rcp->cpumask & cpu_online_mask) to prevent
- * sending smp_reschedule() to an offlined CPU.
- */
- for_each_cpu_and(cpu,
- to_cpumask(rcp->cpumask), cpu_online_mask) {
- if (cpu != rdp->cpu)
- smp_send_reschedule(cpu);
- }
- }
- spin_unlock_irqrestore(&rcp->lock, flags);
-}
-#else
-static inline void force_quiescent_state(struct rcu_data *rdp,
- struct rcu_ctrlblk *rcp)
-{
- set_need_resched();
-}
-#endif
-
-static void __call_rcu(struct rcu_head *head, struct rcu_ctrlblk *rcp,
- struct rcu_data *rdp)
-{
- long batch;
-
- head->next = NULL;
- smp_mb(); /* Read of rcu->cur must happen after any change by caller. */
-
- /*
- * Determine the batch number of this callback.
- *
- * Using ACCESS_ONCE to avoid the following error when gcc eliminates
- * local variable "batch" and emits codes like this:
- * 1) rdp->batch = rcp->cur + 1 # gets old value
- * ......
- * 2)rcu_batch_after(rcp->cur + 1, rdp->batch) # gets new value
- * then [*nxttail[0], *nxttail[1]) may contain callbacks
- * that batch# = rdp->batch, see the comment of struct rcu_data.
- */
- batch = ACCESS_ONCE(rcp->cur) + 1;
-
- if (rdp->nxtlist && rcu_batch_after(batch, rdp->batch)) {
- /* process callbacks */
- rdp->nxttail[0] = rdp->nxttail[1];
- rdp->nxttail[1] = rdp->nxttail[2];
- if (rcu_batch_after(batch - 1, rdp->batch))
- rdp->nxttail[0] = rdp->nxttail[2];
- }
-
- rdp->batch = batch;
- *rdp->nxttail[2] = head;
- rdp->nxttail[2] = &head->next;
-
- if (unlikely(++rdp->qlen > qhimark)) {
- rdp->blimit = INT_MAX;
- force_quiescent_state(rdp, &rcu_ctrlblk);
- }
-}
-
-#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
-
-static void record_gp_stall_check_time(struct rcu_ctrlblk *rcp)
-{
- rcp->gp_start = jiffies;
- rcp->jiffies_stall = jiffies + RCU_SECONDS_TILL_STALL_CHECK;
-}
-
-static void print_other_cpu_stall(struct rcu_ctrlblk *rcp)
-{
- int cpu;
- long delta;
- unsigned long flags;
-
- /* Only let one CPU complain about others per time interval. */
-
- spin_lock_irqsave(&rcp->lock, flags);
- delta = jiffies - rcp->jiffies_stall;
- if (delta < 2 || rcp->cur != rcp->completed) {
- spin_unlock_irqrestore(&rcp->lock, flags);
- return;
- }
- rcp->jiffies_stall = jiffies + RCU_SECONDS_TILL_STALL_RECHECK;
- spin_unlock_irqrestore(&rcp->lock, flags);
-
- /* OK, time to rat on our buddy... */
-
- printk(KERN_ERR "INFO: RCU detected CPU stalls:");
- for_each_possible_cpu(cpu) {
- if (cpumask_test_cpu(cpu, to_cpumask(rcp->cpumask)))
- printk(" %d", cpu);
- }
- printk(" (detected by %d, t=%ld jiffies)\n",
- smp_processor_id(), (long)(jiffies - rcp->gp_start));
-}
-
-static void print_cpu_stall(struct rcu_ctrlblk *rcp)
-{
- unsigned long flags;
-
- printk(KERN_ERR "INFO: RCU detected CPU %d stall (t=%lu/%lu jiffies)\n",
- smp_processor_id(), jiffies,
- jiffies - rcp->gp_start);
- dump_stack();
- spin_lock_irqsave(&rcp->lock, flags);
- if ((long)(jiffies - rcp->jiffies_stall) >= 0)
- rcp->jiffies_stall =
- jiffies + RCU_SECONDS_TILL_STALL_RECHECK;
- spin_unlock_irqrestore(&rcp->lock, flags);
- set_need_resched(); /* kick ourselves to get things going. */
-}
-
-static void check_cpu_stall(struct rcu_ctrlblk *rcp)
-{
- long delta;
-
- delta = jiffies - rcp->jiffies_stall;
- if (cpumask_test_cpu(smp_processor_id(), to_cpumask(rcp->cpumask)) &&
- delta >= 0) {
-
- /* We haven't checked in, so go dump stack. */
- print_cpu_stall(rcp);
-
- } else if (rcp->cur != rcp->completed && delta >= 2) {
-
- /* They had two seconds to dump stack, so complain. */
- print_other_cpu_stall(rcp);
- }
-}
-
-#else /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
-
-static void record_gp_stall_check_time(struct rcu_ctrlblk *rcp)
-{
-}
-
-static inline void check_cpu_stall(struct rcu_ctrlblk *rcp)
-{
-}
-
-#endif /* #else #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
-
-/**
- * call_rcu - Queue an RCU callback for invocation after a grace period.
- * @head: structure to be used for queueing the RCU updates.
- * @func: actual update function to be invoked after the grace period
- *
- * The update function will be invoked some time after a full grace
- * period elapses, in other words after all currently executing RCU
- * read-side critical sections have completed. RCU read-side critical
- * sections are delimited by rcu_read_lock() and rcu_read_unlock(),
- * and may be nested.
- */
-void call_rcu(struct rcu_head *head,
- void (*func)(struct rcu_head *rcu))
-{
- unsigned long flags;
-
- head->func = func;
- local_irq_save(flags);
- __call_rcu(head, &rcu_ctrlblk, &__get_cpu_var(rcu_data));
- local_irq_restore(flags);
-}
-EXPORT_SYMBOL_GPL(call_rcu);
-
-/**
- * call_rcu_bh - Queue an RCU for invocation after a quicker grace period.
- * @head: structure to be used for queueing the RCU updates.
- * @func: actual update function to be invoked after the grace period
- *
- * The update function will be invoked some time after a full grace
- * period elapses, in other words after all currently executing RCU
- * read-side critical sections have completed. call_rcu_bh() assumes
- * that the read-side critical sections end on completion of a softirq
- * handler. This means that read-side critical sections in process
- * context must not be interrupted by softirqs. This interface is to be
- * used when most of the read-side critical sections are in softirq context.
- * RCU read-side critical sections are delimited by rcu_read_lock() and
- * rcu_read_unlock(), * if in interrupt context or rcu_read_lock_bh()
- * and rcu_read_unlock_bh(), if in process context. These may be nested.
- */
-void call_rcu_bh(struct rcu_head *head,
- void (*func)(struct rcu_head *rcu))
-{
- unsigned long flags;
-
- head->func = func;
- local_irq_save(flags);
- __call_rcu(head, &rcu_bh_ctrlblk, &__get_cpu_var(rcu_bh_data));
- local_irq_restore(flags);
-}
-EXPORT_SYMBOL_GPL(call_rcu_bh);
-
-/*
- * Return the number of RCU batches processed thus far. Useful
- * for debug and statistics.
- */
-long rcu_batches_completed(void)
-{
- return rcu_ctrlblk.completed;
-}
-EXPORT_SYMBOL_GPL(rcu_batches_completed);
-
-/*
- * Return the number of RCU batches processed thus far. Useful
- * for debug and statistics.
- */
-long rcu_batches_completed_bh(void)
-{
- return rcu_bh_ctrlblk.completed;
-}
-EXPORT_SYMBOL_GPL(rcu_batches_completed_bh);
-
-/* Raises the softirq for processing rcu_callbacks. */
-static inline void raise_rcu_softirq(void)
-{
- raise_softirq(RCU_SOFTIRQ);
-}
-
-/*
- * Invoke the completed RCU callbacks. They are expected to be in
- * a per-cpu list.
- */
-static void rcu_do_batch(struct rcu_data *rdp)
-{
- unsigned long flags;
- struct rcu_head *next, *list;
- int count = 0;
-
- list = rdp->donelist;
- while (list) {
- next = list->next;
- prefetch(next);
- list->func(list);
- list = next;
- if (++count >= rdp->blimit)
- break;
- }
- rdp->donelist = list;
-
- local_irq_save(flags);
- rdp->qlen -= count;
- local_irq_restore(flags);
- if (rdp->blimit == INT_MAX && rdp->qlen <= qlowmark)
- rdp->blimit = blimit;
-
- if (!rdp->donelist)
- rdp->donetail = &rdp->donelist;
- else
- raise_rcu_softirq();
-}
-
-/*
- * Grace period handling:
- * The grace period handling consists out of two steps:
- * - A new grace period is started.
- * This is done by rcu_start_batch. The start is not broadcasted to
- * all cpus, they must pick this up by comparing rcp->cur with
- * rdp->quiescbatch. All cpus are recorded in the
- * rcu_ctrlblk.cpumask bitmap.
- * - All cpus must go through a quiescent state.
- * Since the start of the grace period is not broadcasted, at least two
- * calls to rcu_check_quiescent_state are required:
- * The first call just notices that a new grace period is running. The
- * following calls check if there was a quiescent state since the beginning
- * of the grace period. If so, it updates rcu_ctrlblk.cpumask. If
- * the bitmap is empty, then the grace period is completed.
- * rcu_check_quiescent_state calls rcu_start_batch(0) to start the next grace
- * period (if necessary).
- */
-
-/*
- * Register a new batch of callbacks, and start it up if there is currently no
- * active batch and the batch to be registered has not already occurred.
- * Caller must hold rcu_ctrlblk.lock.
- */
-static void rcu_start_batch(struct rcu_ctrlblk *rcp)
-{
- if (rcp->cur != rcp->pending &&
- rcp->completed == rcp->cur) {
- rcp->cur++;
- record_gp_stall_check_time(rcp);
-
- /*
- * Accessing nohz_cpu_mask before incrementing rcp->cur needs a
- * Barrier Otherwise it can cause tickless idle CPUs to be
- * included in rcp->cpumask, which will extend graceperiods
- * unnecessarily.
- */
- smp_mb();
- cpumask_andnot(to_cpumask(rcp->cpumask),
- cpu_online_mask, nohz_cpu_mask);
-
- rcp->signaled = 0;
- }
-}
-
-/*
- * cpu went through a quiescent state since the beginning of the grace period.
- * Clear it from the cpu mask and complete the grace period if it was the last
- * cpu. Start another grace period if someone has further entries pending
- */
-static void cpu_quiet(int cpu, struct rcu_ctrlblk *rcp)
-{
- cpumask_clear_cpu(cpu, to_cpumask(rcp->cpumask));
- if (cpumask_empty(to_cpumask(rcp->cpumask))) {
- /* batch completed ! */
- rcp->completed = rcp->cur;
- rcu_start_batch(rcp);
- }
-}
-
-/*
- * Check if the cpu has gone through a quiescent state (say context
- * switch). If so and if it already hasn't done so in this RCU
- * quiescent cycle, then indicate that it has done so.
- */
-static void rcu_check_quiescent_state(struct rcu_ctrlblk *rcp,
- struct rcu_data *rdp)
-{
- unsigned long flags;
-
- if (rdp->quiescbatch != rcp->cur) {
- /* start new grace period: */
- rdp->qs_pending = 1;
- rdp->passed_quiesc = 0;
- rdp->quiescbatch = rcp->cur;
- return;
- }
-
- /* Grace period already completed for this cpu?
- * qs_pending is checked instead of the actual bitmap to avoid
- * cacheline trashing.
- */
- if (!rdp->qs_pending)
- return;
-
- /*
- * Was there a quiescent state since the beginning of the grace
- * period? If no, then exit and wait for the next call.
- */
- if (!rdp->passed_quiesc)
- return;
- rdp->qs_pending = 0;
-
- spin_lock_irqsave(&rcp->lock, flags);
- /*
- * rdp->quiescbatch/rcp->cur and the cpu bitmap can come out of sync
- * during cpu startup. Ignore the quiescent state.
- */
- if (likely(rdp->quiescbatch == rcp->cur))
- cpu_quiet(rdp->cpu, rcp);
-
- spin_unlock_irqrestore(&rcp->lock, flags);
-}
-
-
-#ifdef CONFIG_HOTPLUG_CPU
-
-/* warning! helper for rcu_offline_cpu. do not use elsewhere without reviewing
- * locking requirements, the list it's pulling from has to belong to a cpu
- * which is dead and hence not processing interrupts.
- */
-static void rcu_move_batch(struct rcu_data *this_rdp, struct rcu_head *list,
- struct rcu_head **tail, long batch)
-{
- unsigned long flags;
-
- if (list) {
- local_irq_save(flags);
- this_rdp->batch = batch;
- *this_rdp->nxttail[2] = list;
- this_rdp->nxttail[2] = tail;
- local_irq_restore(flags);
- }
-}
-
-static void __rcu_offline_cpu(struct rcu_data *this_rdp,
- struct rcu_ctrlblk *rcp, struct rcu_data *rdp)
-{
- unsigned long flags;
-
- /*
- * if the cpu going offline owns the grace period
- * we can block indefinitely waiting for it, so flush
- * it here
- */
- spin_lock_irqsave(&rcp->lock, flags);
- if (rcp->cur != rcp->completed)
- cpu_quiet(rdp->cpu, rcp);
- rcu_move_batch(this_rdp, rdp->donelist, rdp->donetail, rcp->cur + 1);
- rcu_move_batch(this_rdp, rdp->nxtlist, rdp->nxttail[2], rcp->cur + 1);
- spin_unlock(&rcp->lock);
-
- this_rdp->qlen += rdp->qlen;
- local_irq_restore(flags);
-}
-
-static void rcu_offline_cpu(int cpu)
-{
- struct rcu_data *this_rdp = &get_cpu_var(rcu_data);
- struct rcu_data *this_bh_rdp = &get_cpu_var(rcu_bh_data);
-
- __rcu_offline_cpu(this_rdp, &rcu_ctrlblk,
- &per_cpu(rcu_data, cpu));
- __rcu_offline_cpu(this_bh_rdp, &rcu_bh_ctrlblk,
- &per_cpu(rcu_bh_data, cpu));
- put_cpu_var(rcu_data);
- put_cpu_var(rcu_bh_data);
-}
-
-#else
-
-static void rcu_offline_cpu(int cpu)
-{
-}
-
-#endif
-
-/*
- * This does the RCU processing work from softirq context.
- */
-static void __rcu_process_callbacks(struct rcu_ctrlblk *rcp,
- struct rcu_data *rdp)
-{
- unsigned long flags;
- long completed_snap;
-
- if (rdp->nxtlist) {
- local_irq_save(flags);
- completed_snap = ACCESS_ONCE(rcp->completed);
-
- /*
- * move the other grace-period-completed entries to
- * [rdp->nxtlist, *rdp->nxttail[0]) temporarily
- */
- if (!rcu_batch_before(completed_snap, rdp->batch))
- rdp->nxttail[0] = rdp->nxttail[1] = rdp->nxttail[2];
- else if (!rcu_batch_before(completed_snap, rdp->batch - 1))
- rdp->nxttail[0] = rdp->nxttail[1];
-
- /*
- * the grace period for entries in
- * [rdp->nxtlist, *rdp->nxttail[0]) has completed and
- * move these entries to donelist
- */
- if (rdp->nxttail[0] != &rdp->nxtlist) {
- *rdp->donetail = rdp->nxtlist;
- rdp->donetail = rdp->nxttail[0];
- rdp->nxtlist = *rdp->nxttail[0];
- *rdp->donetail = NULL;
-
- if (rdp->nxttail[1] == rdp->nxttail[0])
- rdp->nxttail[1] = &rdp->nxtlist;
- if (rdp->nxttail[2] == rdp->nxttail[0])
- rdp->nxttail[2] = &rdp->nxtlist;
- rdp->nxttail[0] = &rdp->nxtlist;
- }
-
- local_irq_restore(flags);
-
- if (rcu_batch_after(rdp->batch, rcp->pending)) {
- unsigned long flags2;
-
- /* and start it/schedule start if it's a new batch */
- spin_lock_irqsave(&rcp->lock, flags2);
- if (rcu_batch_after(rdp->batch, rcp->pending)) {
- rcp->pending = rdp->batch;
- rcu_start_batch(rcp);
- }
- spin_unlock_irqrestore(&rcp->lock, flags2);
- }
- }
-
- rcu_check_quiescent_state(rcp, rdp);
- if (rdp->donelist)
- rcu_do_batch(rdp);
-}
-
-static void rcu_process_callbacks(struct softirq_action *unused)
-{
- /*
- * Memory references from any prior RCU read-side critical sections
- * executed by the interrupted code must be see before any RCU
- * grace-period manupulations below.
- */
-
- smp_mb(); /* See above block comment. */
-
- __rcu_process_callbacks(&rcu_ctrlblk, &__get_cpu_var(rcu_data));
- __rcu_process_callbacks(&rcu_bh_ctrlblk, &__get_cpu_var(rcu_bh_data));
-
- /*
- * Memory references from any later RCU read-side critical sections
- * executed by the interrupted code must be see after any RCU
- * grace-period manupulations above.
- */
-
- smp_mb(); /* See above block comment. */
-}
-
-static int __rcu_pending(struct rcu_ctrlblk *rcp, struct rcu_data *rdp)
-{
- /* Check for CPU stalls, if enabled. */
- check_cpu_stall(rcp);
-
- if (rdp->nxtlist) {
- long completed_snap = ACCESS_ONCE(rcp->completed);
-
- /*
- * This cpu has pending rcu entries and the grace period
- * for them has completed.
- */
- if (!rcu_batch_before(completed_snap, rdp->batch))
- return 1;
- if (!rcu_batch_before(completed_snap, rdp->batch - 1) &&
- rdp->nxttail[0] != rdp->nxttail[1])
- return 1;
- if (rdp->nxttail[0] != &rdp->nxtlist)
- return 1;
-
- /*
- * This cpu has pending rcu entries and the new batch
- * for then hasn't been started nor scheduled start
- */
- if (rcu_batch_after(rdp->batch, rcp->pending))
- return 1;
- }
-
- /* This cpu has finished callbacks to invoke */
- if (rdp->donelist)
- return 1;
-
- /* The rcu core waits for a quiescent state from the cpu */
- if (rdp->quiescbatch != rcp->cur || rdp->qs_pending)
- return 1;
-
- /* nothing to do */
- return 0;
-}
-
-/*
- * Check to see if there is any immediate RCU-related work to be done
- * by the current CPU, returning 1 if so. This function is part of the
- * RCU implementation; it is -not- an exported member of the RCU API.
- */
-int rcu_pending(int cpu)
-{
- return __rcu_pending(&rcu_ctrlblk, &per_cpu(rcu_data, cpu)) ||
- __rcu_pending(&rcu_bh_ctrlblk, &per_cpu(rcu_bh_data, cpu));
-}
-
-/*
- * Check to see if any future RCU-related work will need to be done
- * by the current CPU, even if none need be done immediately, returning
- * 1 if so. This function is part of the RCU implementation; it is -not-
- * an exported member of the RCU API.
- */
-int rcu_needs_cpu(int cpu)
-{
- struct rcu_data *rdp = &per_cpu(rcu_data, cpu);
- struct rcu_data *rdp_bh = &per_cpu(rcu_bh_data, cpu);
-
- return !!rdp->nxtlist || !!rdp_bh->nxtlist || rcu_pending(cpu);
-}
-
-/*
- * Top-level function driving RCU grace-period detection, normally
- * invoked from the scheduler-clock interrupt. This function simply
- * increments counters that are read only from softirq by this same
- * CPU, so there are no memory barriers required.
- */
-void rcu_check_callbacks(int cpu, int user)
-{
- if (user ||
- (idle_cpu(cpu) && rcu_scheduler_active &&
- !in_softirq() && hardirq_count() <= (1 << HARDIRQ_SHIFT))) {
-
- /*
- * Get here if this CPU took its interrupt from user
- * mode or from the idle loop, and if this is not a
- * nested interrupt. In this case, the CPU is in
- * a quiescent state, so count it.
- *
- * Also do a memory barrier. This is needed to handle
- * the case where writes from a preempt-disable section
- * of code get reordered into schedule() by this CPU's
- * write buffer. The memory barrier makes sure that
- * the rcu_qsctr_inc() and rcu_bh_qsctr_inc() are see
- * by other CPUs to happen after any such write.
- */
-
- smp_mb(); /* See above block comment. */
- rcu_qsctr_inc(cpu);
- rcu_bh_qsctr_inc(cpu);
-
- } else if (!in_softirq()) {
-
- /*
- * Get here if this CPU did not take its interrupt from
- * softirq, in other words, if it is not interrupting
- * a rcu_bh read-side critical section. This is an _bh
- * critical section, so count it. The memory barrier
- * is needed for the same reason as is the above one.
- */
-
- smp_mb(); /* See above block comment. */
- rcu_bh_qsctr_inc(cpu);
- }
- raise_rcu_softirq();
-}
-
-static void __cpuinit rcu_init_percpu_data(int cpu, struct rcu_ctrlblk *rcp,
- struct rcu_data *rdp)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&rcp->lock, flags);
- memset(rdp, 0, sizeof(*rdp));
- rdp->nxttail[0] = rdp->nxttail[1] = rdp->nxttail[2] = &rdp->nxtlist;
- rdp->donetail = &rdp->donelist;
- rdp->quiescbatch = rcp->completed;
- rdp->qs_pending = 0;
- rdp->cpu = cpu;
- rdp->blimit = blimit;
- spin_unlock_irqrestore(&rcp->lock, flags);
-}
-
-static void __cpuinit rcu_online_cpu(int cpu)
-{
- struct rcu_data *rdp = &per_cpu(rcu_data, cpu);
- struct rcu_data *bh_rdp = &per_cpu(rcu_bh_data, cpu);
-
- rcu_init_percpu_data(cpu, &rcu_ctrlblk, rdp);
- rcu_init_percpu_data(cpu, &rcu_bh_ctrlblk, bh_rdp);
- open_softirq(RCU_SOFTIRQ, rcu_process_callbacks);
-}
-
-static int __cpuinit rcu_cpu_notify(struct notifier_block *self,
- unsigned long action, void *hcpu)
-{
- long cpu = (long)hcpu;
-
- switch (action) {
- case CPU_UP_PREPARE:
- case CPU_UP_PREPARE_FROZEN:
- rcu_online_cpu(cpu);
- break;
- case CPU_DEAD:
- case CPU_DEAD_FROZEN:
- rcu_offline_cpu(cpu);
- break;
- default:
- break;
- }
- return NOTIFY_OK;
-}
-
-static struct notifier_block __cpuinitdata rcu_nb = {
- .notifier_call = rcu_cpu_notify,
-};
-
-/*
- * Initializes rcu mechanism. Assumed to be called early.
- * That is before local timer(SMP) or jiffie timer (uniproc) is setup.
- * Note that rcu_qsctr and friends are implicitly
- * initialized due to the choice of ``0'' for RCU_CTR_INVALID.
- */
-void __init __rcu_init(void)
-{
-#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
- printk(KERN_INFO "RCU-based detection of stalled CPUs is enabled.\n");
-#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
- rcu_cpu_notify(&rcu_nb, CPU_UP_PREPARE,
- (void *)(long)smp_processor_id());
- /* Register notifier for non-boot CPUs */
- register_cpu_notifier(&rcu_nb);
-}
-
-module_param(blimit, int, 0);
-module_param(qhimark, int, 0);
-module_param(qlowmark, int, 0);
}
EXPORT_SYMBOL_GPL(synchronize_rcu);
+/**
+ * synchronize_rcu_bh - wait until an rcu_bh grace period has elapsed.
+ *
+ * Control will return to the caller some time after a full rcu_bh grace
+ * period has elapsed, in other words after all currently executing rcu_bh
+ * read-side critical sections have completed. RCU read-side critical
+ * sections are delimited by rcu_read_lock_bh() and rcu_read_unlock_bh(),
+ * and may be nested.
+ */
+void synchronize_rcu_bh(void)
+{
+ struct rcu_synchronize rcu;
+
+ if (rcu_blocking_is_gp())
+ return;
+
+ init_completion(&rcu.completion);
+ /* Will wake me after RCU finished. */
+ call_rcu_bh(&rcu.head, wakeme_after_rcu);
+ /* Wait for it. */
+ wait_for_completion(&rcu.completion);
+}
+EXPORT_SYMBOL_GPL(synchronize_rcu_bh);
+
static void rcu_barrier_callback(struct rcu_head *notused)
{
if (atomic_dec_and_test(&rcu_barrier_cpu_count))
static inline void wait_migrated_callbacks(void)
{
wait_event(rcu_migrate_wq, !atomic_read(&rcu_migrate_type_count));
+ smp_mb(); /* In case we didn't sleep. */
}
/*
wake_up(&rcu_migrate_wq);
}
+extern int rcu_cpu_notify(struct notifier_block *self,
+ unsigned long action, void *hcpu);
+
static int __cpuinit rcu_barrier_cpu_hotplug(struct notifier_block *self,
unsigned long action, void *hcpu)
{
+ rcu_cpu_notify(self, action, hcpu);
if (action == CPU_DYING) {
/*
* preempt_disable() in on_each_cpu() prevents stop_machine(),
call_rcu_bh(rcu_migrate_head, rcu_migrate_callback);
call_rcu_sched(rcu_migrate_head + 1, rcu_migrate_callback);
call_rcu(rcu_migrate_head + 2, rcu_migrate_callback);
- } else if (action == CPU_POST_DEAD) {
+ } else if (action == CPU_DOWN_PREPARE) {
+ /* Don't need to wait until next removal operation. */
/* rcu_migrate_head is protected by cpu_add_remove_lock */
wait_migrated_callbacks();
}
void __init rcu_init(void)
{
+ int i;
+
__rcu_init();
- hotcpu_notifier(rcu_barrier_cpu_hotplug, 0);
+ cpu_notifier(rcu_barrier_cpu_hotplug, 0);
+
+ /*
+ * We don't need protection against CPU-hotplug here because
+ * this is called early in boot, before either interrupts
+ * or the scheduler are operational.
+ */
+ for_each_online_cpu(i)
+ rcu_barrier_cpu_hotplug(NULL, CPU_UP_PREPARE, (void *)(long)i);
}
void rcu_scheduler_starting(void)
+++ /dev/null
-/*
- * Read-Copy Update mechanism for mutual exclusion, realtime implementation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright IBM Corporation, 2006
- *
- * Authors: Paul E. McKenney <paulmck@us.ibm.com>
- * With thanks to Esben Nielsen, Bill Huey, and Ingo Molnar
- * for pushing me away from locks and towards counters, and
- * to Suparna Bhattacharya for pushing me completely away
- * from atomic instructions on the read side.
- *
- * - Added handling of Dynamic Ticks
- * Copyright 2007 - Paul E. Mckenney <paulmck@us.ibm.com>
- * - Steven Rostedt <srostedt@redhat.com>
- *
- * Papers: http://www.rdrop.com/users/paulmck/RCU
- *
- * Design Document: http://lwn.net/Articles/253651/
- *
- * For detailed explanation of Read-Copy Update mechanism see -
- * Documentation/RCU/ *.txt
- *
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/smp.h>
-#include <linux/rcupdate.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <asm/atomic.h>
-#include <linux/bitops.h>
-#include <linux/module.h>
-#include <linux/kthread.h>
-#include <linux/completion.h>
-#include <linux/moduleparam.h>
-#include <linux/percpu.h>
-#include <linux/notifier.h>
-#include <linux/cpu.h>
-#include <linux/random.h>
-#include <linux/delay.h>
-#include <linux/cpumask.h>
-#include <linux/rcupreempt_trace.h>
-#include <asm/byteorder.h>
-
-/*
- * PREEMPT_RCU data structures.
- */
-
-/*
- * GP_STAGES specifies the number of times the state machine has
- * to go through the all the rcu_try_flip_states (see below)
- * in a single Grace Period.
- *
- * GP in GP_STAGES stands for Grace Period ;)
- */
-#define GP_STAGES 2
-struct rcu_data {
- spinlock_t lock; /* Protect rcu_data fields. */
- long completed; /* Number of last completed batch. */
- int waitlistcount;
- struct rcu_head *nextlist;
- struct rcu_head **nexttail;
- struct rcu_head *waitlist[GP_STAGES];
- struct rcu_head **waittail[GP_STAGES];
- struct rcu_head *donelist; /* from waitlist & waitschedlist */
- struct rcu_head **donetail;
- long rcu_flipctr[2];
- struct rcu_head *nextschedlist;
- struct rcu_head **nextschedtail;
- struct rcu_head *waitschedlist;
- struct rcu_head **waitschedtail;
- int rcu_sched_sleeping;
-#ifdef CONFIG_RCU_TRACE
- struct rcupreempt_trace trace;
-#endif /* #ifdef CONFIG_RCU_TRACE */
-};
-
-/*
- * States for rcu_try_flip() and friends.
- */
-
-enum rcu_try_flip_states {
-
- /*
- * Stay here if nothing is happening. Flip the counter if somthing
- * starts happening. Denoted by "I"
- */
- rcu_try_flip_idle_state,
-
- /*
- * Wait here for all CPUs to notice that the counter has flipped. This
- * prevents the old set of counters from ever being incremented once
- * we leave this state, which in turn is necessary because we cannot
- * test any individual counter for zero -- we can only check the sum.
- * Denoted by "A".
- */
- rcu_try_flip_waitack_state,
-
- /*
- * Wait here for the sum of the old per-CPU counters to reach zero.
- * Denoted by "Z".
- */
- rcu_try_flip_waitzero_state,
-
- /*
- * Wait here for each of the other CPUs to execute a memory barrier.
- * This is necessary to ensure that these other CPUs really have
- * completed executing their RCU read-side critical sections, despite
- * their CPUs wildly reordering memory. Denoted by "M".
- */
- rcu_try_flip_waitmb_state,
-};
-
-/*
- * States for rcu_ctrlblk.rcu_sched_sleep.
- */
-
-enum rcu_sched_sleep_states {
- rcu_sched_not_sleeping, /* Not sleeping, callbacks need GP. */
- rcu_sched_sleep_prep, /* Thinking of sleeping, rechecking. */
- rcu_sched_sleeping, /* Sleeping, awaken if GP needed. */
-};
-
-struct rcu_ctrlblk {
- spinlock_t fliplock; /* Protect state-machine transitions. */
- long completed; /* Number of last completed batch. */
- enum rcu_try_flip_states rcu_try_flip_state; /* The current state of
- the rcu state machine */
- spinlock_t schedlock; /* Protect rcu_sched sleep state. */
- enum rcu_sched_sleep_states sched_sleep; /* rcu_sched state. */
- wait_queue_head_t sched_wq; /* Place for rcu_sched to sleep. */
-};
-
-struct rcu_dyntick_sched {
- int dynticks;
- int dynticks_snap;
- int sched_qs;
- int sched_qs_snap;
- int sched_dynticks_snap;
-};
-
-static DEFINE_PER_CPU_SHARED_ALIGNED(struct rcu_dyntick_sched, rcu_dyntick_sched) = {
- .dynticks = 1,
-};
-
-void rcu_qsctr_inc(int cpu)
-{
- struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu);
-
- rdssp->sched_qs++;
-}
-
-#ifdef CONFIG_NO_HZ
-
-void rcu_enter_nohz(void)
-{
- static DEFINE_RATELIMIT_STATE(rs, 10 * HZ, 1);
-
- smp_mb(); /* CPUs seeing ++ must see prior RCU read-side crit sects */
- __get_cpu_var(rcu_dyntick_sched).dynticks++;
- WARN_ON_RATELIMIT(__get_cpu_var(rcu_dyntick_sched).dynticks & 0x1, &rs);
-}
-
-void rcu_exit_nohz(void)
-{
- static DEFINE_RATELIMIT_STATE(rs, 10 * HZ, 1);
-
- __get_cpu_var(rcu_dyntick_sched).dynticks++;
- smp_mb(); /* CPUs seeing ++ must see later RCU read-side crit sects */
- WARN_ON_RATELIMIT(!(__get_cpu_var(rcu_dyntick_sched).dynticks & 0x1),
- &rs);
-}
-
-#endif /* CONFIG_NO_HZ */
-
-
-static DEFINE_PER_CPU(struct rcu_data, rcu_data);
-
-static struct rcu_ctrlblk rcu_ctrlblk = {
- .fliplock = __SPIN_LOCK_UNLOCKED(rcu_ctrlblk.fliplock),
- .completed = 0,
- .rcu_try_flip_state = rcu_try_flip_idle_state,
- .schedlock = __SPIN_LOCK_UNLOCKED(rcu_ctrlblk.schedlock),
- .sched_sleep = rcu_sched_not_sleeping,
- .sched_wq = __WAIT_QUEUE_HEAD_INITIALIZER(rcu_ctrlblk.sched_wq),
-};
-
-static struct task_struct *rcu_sched_grace_period_task;
-
-#ifdef CONFIG_RCU_TRACE
-static char *rcu_try_flip_state_names[] =
- { "idle", "waitack", "waitzero", "waitmb" };
-#endif /* #ifdef CONFIG_RCU_TRACE */
-
-static DECLARE_BITMAP(rcu_cpu_online_map, NR_CPUS) __read_mostly
- = CPU_BITS_NONE;
-
-/*
- * Enum and per-CPU flag to determine when each CPU has seen
- * the most recent counter flip.
- */
-
-enum rcu_flip_flag_values {
- rcu_flip_seen, /* Steady/initial state, last flip seen. */
- /* Only GP detector can update. */
- rcu_flipped /* Flip just completed, need confirmation. */
- /* Only corresponding CPU can update. */
-};
-static DEFINE_PER_CPU_SHARED_ALIGNED(enum rcu_flip_flag_values, rcu_flip_flag)
- = rcu_flip_seen;
-
-/*
- * Enum and per-CPU flag to determine when each CPU has executed the
- * needed memory barrier to fence in memory references from its last RCU
- * read-side critical section in the just-completed grace period.
- */
-
-enum rcu_mb_flag_values {
- rcu_mb_done, /* Steady/initial state, no mb()s required. */
- /* Only GP detector can update. */
- rcu_mb_needed /* Flip just completed, need an mb(). */
- /* Only corresponding CPU can update. */
-};
-static DEFINE_PER_CPU_SHARED_ALIGNED(enum rcu_mb_flag_values, rcu_mb_flag)
- = rcu_mb_done;
-
-/*
- * RCU_DATA_ME: find the current CPU's rcu_data structure.
- * RCU_DATA_CPU: find the specified CPU's rcu_data structure.
- */
-#define RCU_DATA_ME() (&__get_cpu_var(rcu_data))
-#define RCU_DATA_CPU(cpu) (&per_cpu(rcu_data, cpu))
-
-/*
- * Helper macro for tracing when the appropriate rcu_data is not
- * cached in a local variable, but where the CPU number is so cached.
- */
-#define RCU_TRACE_CPU(f, cpu) RCU_TRACE(f, &(RCU_DATA_CPU(cpu)->trace));
-
-/*
- * Helper macro for tracing when the appropriate rcu_data is not
- * cached in a local variable.
- */
-#define RCU_TRACE_ME(f) RCU_TRACE(f, &(RCU_DATA_ME()->trace));
-
-/*
- * Helper macro for tracing when the appropriate rcu_data is pointed
- * to by a local variable.
- */
-#define RCU_TRACE_RDP(f, rdp) RCU_TRACE(f, &((rdp)->trace));
-
-#define RCU_SCHED_BATCH_TIME (HZ / 50)
-
-/*
- * Return the number of RCU batches processed thus far. Useful
- * for debug and statistics.
- */
-long rcu_batches_completed(void)
-{
- return rcu_ctrlblk.completed;
-}
-EXPORT_SYMBOL_GPL(rcu_batches_completed);
-
-void __rcu_read_lock(void)
-{
- int idx;
- struct task_struct *t = current;
- int nesting;
-
- nesting = ACCESS_ONCE(t->rcu_read_lock_nesting);
- if (nesting != 0) {
-
- /* An earlier rcu_read_lock() covers us, just count it. */
-
- t->rcu_read_lock_nesting = nesting + 1;
-
- } else {
- unsigned long flags;
-
- /*
- * We disable interrupts for the following reasons:
- * - If we get scheduling clock interrupt here, and we
- * end up acking the counter flip, it's like a promise
- * that we will never increment the old counter again.
- * Thus we will break that promise if that
- * scheduling clock interrupt happens between the time
- * we pick the .completed field and the time that we
- * increment our counter.
- *
- * - We don't want to be preempted out here.
- *
- * NMIs can still occur, of course, and might themselves
- * contain rcu_read_lock().
- */
-
- local_irq_save(flags);
-
- /*
- * Outermost nesting of rcu_read_lock(), so increment
- * the current counter for the current CPU. Use volatile
- * casts to prevent the compiler from reordering.
- */
-
- idx = ACCESS_ONCE(rcu_ctrlblk.completed) & 0x1;
- ACCESS_ONCE(RCU_DATA_ME()->rcu_flipctr[idx])++;
-
- /*
- * Now that the per-CPU counter has been incremented, we
- * are protected from races with rcu_read_lock() invoked
- * from NMI handlers on this CPU. We can therefore safely
- * increment the nesting counter, relieving further NMIs
- * of the need to increment the per-CPU counter.
- */
-
- ACCESS_ONCE(t->rcu_read_lock_nesting) = nesting + 1;
-
- /*
- * Now that we have preventing any NMIs from storing
- * to the ->rcu_flipctr_idx, we can safely use it to
- * remember which counter to decrement in the matching
- * rcu_read_unlock().
- */
-
- ACCESS_ONCE(t->rcu_flipctr_idx) = idx;
- local_irq_restore(flags);
- }
-}
-EXPORT_SYMBOL_GPL(__rcu_read_lock);
-
-void __rcu_read_unlock(void)
-{
- int idx;
- struct task_struct *t = current;
- int nesting;
-
- nesting = ACCESS_ONCE(t->rcu_read_lock_nesting);
- if (nesting > 1) {
-
- /*
- * We are still protected by the enclosing rcu_read_lock(),
- * so simply decrement the counter.
- */
-
- t->rcu_read_lock_nesting = nesting - 1;
-
- } else {
- unsigned long flags;
-
- /*
- * Disable local interrupts to prevent the grace-period
- * detection state machine from seeing us half-done.
- * NMIs can still occur, of course, and might themselves
- * contain rcu_read_lock() and rcu_read_unlock().
- */
-
- local_irq_save(flags);
-
- /*
- * Outermost nesting of rcu_read_unlock(), so we must
- * decrement the current counter for the current CPU.
- * This must be done carefully, because NMIs can
- * occur at any point in this code, and any rcu_read_lock()
- * and rcu_read_unlock() pairs in the NMI handlers
- * must interact non-destructively with this code.
- * Lots of volatile casts, and -very- careful ordering.
- *
- * Changes to this code, including this one, must be
- * inspected, validated, and tested extremely carefully!!!
- */
-
- /*
- * First, pick up the index.
- */
-
- idx = ACCESS_ONCE(t->rcu_flipctr_idx);
-
- /*
- * Now that we have fetched the counter index, it is
- * safe to decrement the per-task RCU nesting counter.
- * After this, any interrupts or NMIs will increment and
- * decrement the per-CPU counters.
- */
- ACCESS_ONCE(t->rcu_read_lock_nesting) = nesting - 1;
-
- /*
- * It is now safe to decrement this task's nesting count.
- * NMIs that occur after this statement will route their
- * rcu_read_lock() calls through this "else" clause, and
- * will thus start incrementing the per-CPU counter on
- * their own. They will also clobber ->rcu_flipctr_idx,
- * but that is OK, since we have already fetched it.
- */
-
- ACCESS_ONCE(RCU_DATA_ME()->rcu_flipctr[idx])--;
- local_irq_restore(flags);
- }
-}
-EXPORT_SYMBOL_GPL(__rcu_read_unlock);
-
-/*
- * If a global counter flip has occurred since the last time that we
- * advanced callbacks, advance them. Hardware interrupts must be
- * disabled when calling this function.
- */
-static void __rcu_advance_callbacks(struct rcu_data *rdp)
-{
- int cpu;
- int i;
- int wlc = 0;
-
- if (rdp->completed != rcu_ctrlblk.completed) {
- if (rdp->waitlist[GP_STAGES - 1] != NULL) {
- *rdp->donetail = rdp->waitlist[GP_STAGES - 1];
- rdp->donetail = rdp->waittail[GP_STAGES - 1];
- RCU_TRACE_RDP(rcupreempt_trace_move2done, rdp);
- }
- for (i = GP_STAGES - 2; i >= 0; i--) {
- if (rdp->waitlist[i] != NULL) {
- rdp->waitlist[i + 1] = rdp->waitlist[i];
- rdp->waittail[i + 1] = rdp->waittail[i];
- wlc++;
- } else {
- rdp->waitlist[i + 1] = NULL;
- rdp->waittail[i + 1] =
- &rdp->waitlist[i + 1];
- }
- }
- if (rdp->nextlist != NULL) {
- rdp->waitlist[0] = rdp->nextlist;
- rdp->waittail[0] = rdp->nexttail;
- wlc++;
- rdp->nextlist = NULL;
- rdp->nexttail = &rdp->nextlist;
- RCU_TRACE_RDP(rcupreempt_trace_move2wait, rdp);
- } else {
- rdp->waitlist[0] = NULL;
- rdp->waittail[0] = &rdp->waitlist[0];
- }
- rdp->waitlistcount = wlc;
- rdp->completed = rcu_ctrlblk.completed;
- }
-
- /*
- * Check to see if this CPU needs to report that it has seen
- * the most recent counter flip, thereby declaring that all
- * subsequent rcu_read_lock() invocations will respect this flip.
- */
-
- cpu = raw_smp_processor_id();
- if (per_cpu(rcu_flip_flag, cpu) == rcu_flipped) {
- smp_mb(); /* Subsequent counter accesses must see new value */
- per_cpu(rcu_flip_flag, cpu) = rcu_flip_seen;
- smp_mb(); /* Subsequent RCU read-side critical sections */
- /* seen -after- acknowledgement. */
- }
-}
-
-#ifdef CONFIG_NO_HZ
-static DEFINE_PER_CPU(int, rcu_update_flag);
-
-/**
- * rcu_irq_enter - Called from Hard irq handlers and NMI/SMI.
- *
- * If the CPU was idle with dynamic ticks active, this updates the
- * rcu_dyntick_sched.dynticks to let the RCU handling know that the
- * CPU is active.
- */
-void rcu_irq_enter(void)
-{
- int cpu = smp_processor_id();
- struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu);
-
- if (per_cpu(rcu_update_flag, cpu))
- per_cpu(rcu_update_flag, cpu)++;
-
- /*
- * Only update if we are coming from a stopped ticks mode
- * (rcu_dyntick_sched.dynticks is even).
- */
- if (!in_interrupt() &&
- (rdssp->dynticks & 0x1) == 0) {
- /*
- * The following might seem like we could have a race
- * with NMI/SMIs. But this really isn't a problem.
- * Here we do a read/modify/write, and the race happens
- * when an NMI/SMI comes in after the read and before
- * the write. But NMI/SMIs will increment this counter
- * twice before returning, so the zero bit will not
- * be corrupted by the NMI/SMI which is the most important
- * part.
- *
- * The only thing is that we would bring back the counter
- * to a postion that it was in during the NMI/SMI.
- * But the zero bit would be set, so the rest of the
- * counter would again be ignored.
- *
- * On return from the IRQ, the counter may have the zero
- * bit be 0 and the counter the same as the return from
- * the NMI/SMI. If the state machine was so unlucky to
- * see that, it still doesn't matter, since all
- * RCU read-side critical sections on this CPU would
- * have already completed.
- */
- rdssp->dynticks++;
- /*
- * The following memory barrier ensures that any
- * rcu_read_lock() primitives in the irq handler
- * are seen by other CPUs to follow the above
- * increment to rcu_dyntick_sched.dynticks. This is
- * required in order for other CPUs to correctly
- * determine when it is safe to advance the RCU
- * grace-period state machine.
- */
- smp_mb(); /* see above block comment. */
- /*
- * Since we can't determine the dynamic tick mode from
- * the rcu_dyntick_sched.dynticks after this routine,
- * we use a second flag to acknowledge that we came
- * from an idle state with ticks stopped.
- */
- per_cpu(rcu_update_flag, cpu)++;
- /*
- * If we take an NMI/SMI now, they will also increment
- * the rcu_update_flag, and will not update the
- * rcu_dyntick_sched.dynticks on exit. That is for
- * this IRQ to do.
- */
- }
-}
-
-/**
- * rcu_irq_exit - Called from exiting Hard irq context.
- *
- * If the CPU was idle with dynamic ticks active, update the
- * rcu_dyntick_sched.dynticks to put let the RCU handling be
- * aware that the CPU is going back to idle with no ticks.
- */
-void rcu_irq_exit(void)
-{
- int cpu = smp_processor_id();
- struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu);
-
- /*
- * rcu_update_flag is set if we interrupted the CPU
- * when it was idle with ticks stopped.
- * Once this occurs, we keep track of interrupt nesting
- * because a NMI/SMI could also come in, and we still
- * only want the IRQ that started the increment of the
- * rcu_dyntick_sched.dynticks to be the one that modifies
- * it on exit.
- */
- if (per_cpu(rcu_update_flag, cpu)) {
- if (--per_cpu(rcu_update_flag, cpu))
- return;
-
- /* This must match the interrupt nesting */
- WARN_ON(in_interrupt());
-
- /*
- * If an NMI/SMI happens now we are still
- * protected by the rcu_dyntick_sched.dynticks being odd.
- */
-
- /*
- * The following memory barrier ensures that any
- * rcu_read_unlock() primitives in the irq handler
- * are seen by other CPUs to preceed the following
- * increment to rcu_dyntick_sched.dynticks. This
- * is required in order for other CPUs to determine
- * when it is safe to advance the RCU grace-period
- * state machine.
- */
- smp_mb(); /* see above block comment. */
- rdssp->dynticks++;
- WARN_ON(rdssp->dynticks & 0x1);
- }
-}
-
-void rcu_nmi_enter(void)
-{
- rcu_irq_enter();
-}
-
-void rcu_nmi_exit(void)
-{
- rcu_irq_exit();
-}
-
-static void dyntick_save_progress_counter(int cpu)
-{
- struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu);
-
- rdssp->dynticks_snap = rdssp->dynticks;
-}
-
-static inline int
-rcu_try_flip_waitack_needed(int cpu)
-{
- long curr;
- long snap;
- struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu);
-
- curr = rdssp->dynticks;
- snap = rdssp->dynticks_snap;
- smp_mb(); /* force ordering with cpu entering/leaving dynticks. */
-
- /*
- * If the CPU remained in dynticks mode for the entire time
- * and didn't take any interrupts, NMIs, SMIs, or whatever,
- * then it cannot be in the middle of an rcu_read_lock(), so
- * the next rcu_read_lock() it executes must use the new value
- * of the counter. So we can safely pretend that this CPU
- * already acknowledged the counter.
- */
-
- if ((curr == snap) && ((curr & 0x1) == 0))
- return 0;
-
- /*
- * If the CPU passed through or entered a dynticks idle phase with
- * no active irq handlers, then, as above, we can safely pretend
- * that this CPU already acknowledged the counter.
- */
-
- if ((curr - snap) > 2 || (curr & 0x1) == 0)
- return 0;
-
- /* We need this CPU to explicitly acknowledge the counter flip. */
-
- return 1;
-}
-
-static inline int
-rcu_try_flip_waitmb_needed(int cpu)
-{
- long curr;
- long snap;
- struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu);
-
- curr = rdssp->dynticks;
- snap = rdssp->dynticks_snap;
- smp_mb(); /* force ordering with cpu entering/leaving dynticks. */
-
- /*
- * If the CPU remained in dynticks mode for the entire time
- * and didn't take any interrupts, NMIs, SMIs, or whatever,
- * then it cannot have executed an RCU read-side critical section
- * during that time, so there is no need for it to execute a
- * memory barrier.
- */
-
- if ((curr == snap) && ((curr & 0x1) == 0))
- return 0;
-
- /*
- * If the CPU either entered or exited an outermost interrupt,
- * SMI, NMI, or whatever handler, then we know that it executed
- * a memory barrier when doing so. So we don't need another one.
- */
- if (curr != snap)
- return 0;
-
- /* We need the CPU to execute a memory barrier. */
-
- return 1;
-}
-
-static void dyntick_save_progress_counter_sched(int cpu)
-{
- struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu);
-
- rdssp->sched_dynticks_snap = rdssp->dynticks;
-}
-
-static int rcu_qsctr_inc_needed_dyntick(int cpu)
-{
- long curr;
- long snap;
- struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu);
-
- curr = rdssp->dynticks;
- snap = rdssp->sched_dynticks_snap;
- smp_mb(); /* force ordering with cpu entering/leaving dynticks. */
-
- /*
- * If the CPU remained in dynticks mode for the entire time
- * and didn't take any interrupts, NMIs, SMIs, or whatever,
- * then it cannot be in the middle of an rcu_read_lock(), so
- * the next rcu_read_lock() it executes must use the new value
- * of the counter. Therefore, this CPU has been in a quiescent
- * state the entire time, and we don't need to wait for it.
- */
-
- if ((curr == snap) && ((curr & 0x1) == 0))
- return 0;
-
- /*
- * If the CPU passed through or entered a dynticks idle phase with
- * no active irq handlers, then, as above, this CPU has already
- * passed through a quiescent state.
- */
-
- if ((curr - snap) > 2 || (snap & 0x1) == 0)
- return 0;
-
- /* We need this CPU to go through a quiescent state. */
-
- return 1;
-}
-
-#else /* !CONFIG_NO_HZ */
-
-# define dyntick_save_progress_counter(cpu) do { } while (0)
-# define rcu_try_flip_waitack_needed(cpu) (1)
-# define rcu_try_flip_waitmb_needed(cpu) (1)
-
-# define dyntick_save_progress_counter_sched(cpu) do { } while (0)
-# define rcu_qsctr_inc_needed_dyntick(cpu) (1)
-
-#endif /* CONFIG_NO_HZ */
-
-static void save_qsctr_sched(int cpu)
-{
- struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu);
-
- rdssp->sched_qs_snap = rdssp->sched_qs;
-}
-
-static inline int rcu_qsctr_inc_needed(int cpu)
-{
- struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu);
-
- /*
- * If there has been a quiescent state, no more need to wait
- * on this CPU.
- */
-
- if (rdssp->sched_qs != rdssp->sched_qs_snap) {
- smp_mb(); /* force ordering with cpu entering schedule(). */
- return 0;
- }
-
- /* We need this CPU to go through a quiescent state. */
-
- return 1;
-}
-
-/*
- * Get here when RCU is idle. Decide whether we need to
- * move out of idle state, and return non-zero if so.
- * "Straightforward" approach for the moment, might later
- * use callback-list lengths, grace-period duration, or
- * some such to determine when to exit idle state.
- * Might also need a pre-idle test that does not acquire
- * the lock, but let's get the simple case working first...
- */
-
-static int
-rcu_try_flip_idle(void)
-{
- int cpu;
-
- RCU_TRACE_ME(rcupreempt_trace_try_flip_i1);
- if (!rcu_pending(smp_processor_id())) {
- RCU_TRACE_ME(rcupreempt_trace_try_flip_ie1);
- return 0;
- }
-
- /*
- * Do the flip.
- */
-
- RCU_TRACE_ME(rcupreempt_trace_try_flip_g1);
- rcu_ctrlblk.completed++; /* stands in for rcu_try_flip_g2 */
-
- /*
- * Need a memory barrier so that other CPUs see the new
- * counter value before they see the subsequent change of all
- * the rcu_flip_flag instances to rcu_flipped.
- */
-
- smp_mb(); /* see above block comment. */
-
- /* Now ask each CPU for acknowledgement of the flip. */
-
- for_each_cpu(cpu, to_cpumask(rcu_cpu_online_map)) {
- per_cpu(rcu_flip_flag, cpu) = rcu_flipped;
- dyntick_save_progress_counter(cpu);
- }
-
- return 1;
-}
-
-/*
- * Wait for CPUs to acknowledge the flip.
- */
-
-static int
-rcu_try_flip_waitack(void)
-{
- int cpu;
-
- RCU_TRACE_ME(rcupreempt_trace_try_flip_a1);
- for_each_cpu(cpu, to_cpumask(rcu_cpu_online_map))
- if (rcu_try_flip_waitack_needed(cpu) &&
- per_cpu(rcu_flip_flag, cpu) != rcu_flip_seen) {
- RCU_TRACE_ME(rcupreempt_trace_try_flip_ae1);
- return 0;
- }
-
- /*
- * Make sure our checks above don't bleed into subsequent
- * waiting for the sum of the counters to reach zero.
- */
-
- smp_mb(); /* see above block comment. */
- RCU_TRACE_ME(rcupreempt_trace_try_flip_a2);
- return 1;
-}
-
-/*
- * Wait for collective ``last'' counter to reach zero,
- * then tell all CPUs to do an end-of-grace-period memory barrier.
- */
-
-static int
-rcu_try_flip_waitzero(void)
-{
- int cpu;
- int lastidx = !(rcu_ctrlblk.completed & 0x1);
- int sum = 0;
-
- /* Check to see if the sum of the "last" counters is zero. */
-
- RCU_TRACE_ME(rcupreempt_trace_try_flip_z1);
- for_each_cpu(cpu, to_cpumask(rcu_cpu_online_map))
- sum += RCU_DATA_CPU(cpu)->rcu_flipctr[lastidx];
- if (sum != 0) {
- RCU_TRACE_ME(rcupreempt_trace_try_flip_ze1);
- return 0;
- }
-
- /*
- * This ensures that the other CPUs see the call for
- * memory barriers -after- the sum to zero has been
- * detected here
- */
- smp_mb(); /* ^^^^^^^^^^^^ */
-
- /* Call for a memory barrier from each CPU. */
- for_each_cpu(cpu, to_cpumask(rcu_cpu_online_map)) {
- per_cpu(rcu_mb_flag, cpu) = rcu_mb_needed;
- dyntick_save_progress_counter(cpu);
- }
-
- RCU_TRACE_ME(rcupreempt_trace_try_flip_z2);
- return 1;
-}
-
-/*
- * Wait for all CPUs to do their end-of-grace-period memory barrier.
- * Return 0 once all CPUs have done so.
- */
-
-static int
-rcu_try_flip_waitmb(void)
-{
- int cpu;
-
- RCU_TRACE_ME(rcupreempt_trace_try_flip_m1);
- for_each_cpu(cpu, to_cpumask(rcu_cpu_online_map))
- if (rcu_try_flip_waitmb_needed(cpu) &&
- per_cpu(rcu_mb_flag, cpu) != rcu_mb_done) {
- RCU_TRACE_ME(rcupreempt_trace_try_flip_me1);
- return 0;
- }
-
- smp_mb(); /* Ensure that the above checks precede any following flip. */
- RCU_TRACE_ME(rcupreempt_trace_try_flip_m2);
- return 1;
-}
-
-/*
- * Attempt a single flip of the counters. Remember, a single flip does
- * -not- constitute a grace period. Instead, the interval between
- * at least GP_STAGES consecutive flips is a grace period.
- *
- * If anyone is nuts enough to run this CONFIG_PREEMPT_RCU implementation
- * on a large SMP, they might want to use a hierarchical organization of
- * the per-CPU-counter pairs.
- */
-static void rcu_try_flip(void)
-{
- unsigned long flags;
-
- RCU_TRACE_ME(rcupreempt_trace_try_flip_1);
- if (unlikely(!spin_trylock_irqsave(&rcu_ctrlblk.fliplock, flags))) {
- RCU_TRACE_ME(rcupreempt_trace_try_flip_e1);
- return;
- }
-
- /*
- * Take the next transition(s) through the RCU grace-period
- * flip-counter state machine.
- */
-
- switch (rcu_ctrlblk.rcu_try_flip_state) {
- case rcu_try_flip_idle_state:
- if (rcu_try_flip_idle())
- rcu_ctrlblk.rcu_try_flip_state =
- rcu_try_flip_waitack_state;
- break;
- case rcu_try_flip_waitack_state:
- if (rcu_try_flip_waitack())
- rcu_ctrlblk.rcu_try_flip_state =
- rcu_try_flip_waitzero_state;
- break;
- case rcu_try_flip_waitzero_state:
- if (rcu_try_flip_waitzero())
- rcu_ctrlblk.rcu_try_flip_state =
- rcu_try_flip_waitmb_state;
- break;
- case rcu_try_flip_waitmb_state:
- if (rcu_try_flip_waitmb())
- rcu_ctrlblk.rcu_try_flip_state =
- rcu_try_flip_idle_state;
- }
- spin_unlock_irqrestore(&rcu_ctrlblk.fliplock, flags);
-}
-
-/*
- * Check to see if this CPU needs to do a memory barrier in order to
- * ensure that any prior RCU read-side critical sections have committed
- * their counter manipulations and critical-section memory references
- * before declaring the grace period to be completed.
- */
-static void rcu_check_mb(int cpu)
-{
- if (per_cpu(rcu_mb_flag, cpu) == rcu_mb_needed) {
- smp_mb(); /* Ensure RCU read-side accesses are visible. */
- per_cpu(rcu_mb_flag, cpu) = rcu_mb_done;
- }
-}
-
-void rcu_check_callbacks(int cpu, int user)
-{
- unsigned long flags;
- struct rcu_data *rdp = RCU_DATA_CPU(cpu);
-
- /*
- * If this CPU took its interrupt from user mode or from the
- * idle loop, and this is not a nested interrupt, then
- * this CPU has to have exited all prior preept-disable
- * sections of code. So increment the counter to note this.
- *
- * The memory barrier is needed to handle the case where
- * writes from a preempt-disable section of code get reordered
- * into schedule() by this CPU's write buffer. So the memory
- * barrier makes sure that the rcu_qsctr_inc() is seen by other
- * CPUs to happen after any such write.
- */
-
- if (user ||
- (idle_cpu(cpu) && !in_softirq() &&
- hardirq_count() <= (1 << HARDIRQ_SHIFT))) {
- smp_mb(); /* Guard against aggressive schedule(). */
- rcu_qsctr_inc(cpu);
- }
-
- rcu_check_mb(cpu);
- if (rcu_ctrlblk.completed == rdp->completed)
- rcu_try_flip();
- spin_lock_irqsave(&rdp->lock, flags);
- RCU_TRACE_RDP(rcupreempt_trace_check_callbacks, rdp);
- __rcu_advance_callbacks(rdp);
- if (rdp->donelist == NULL) {
- spin_unlock_irqrestore(&rdp->lock, flags);
- } else {
- spin_unlock_irqrestore(&rdp->lock, flags);
- raise_softirq(RCU_SOFTIRQ);
- }
-}
-
-/*
- * Needed by dynticks, to make sure all RCU processing has finished
- * when we go idle:
- */
-void rcu_advance_callbacks(int cpu, int user)
-{
- unsigned long flags;
- struct rcu_data *rdp = RCU_DATA_CPU(cpu);
-
- if (rcu_ctrlblk.completed == rdp->completed) {
- rcu_try_flip();
- if (rcu_ctrlblk.completed == rdp->completed)
- return;
- }
- spin_lock_irqsave(&rdp->lock, flags);
- RCU_TRACE_RDP(rcupreempt_trace_check_callbacks, rdp);
- __rcu_advance_callbacks(rdp);
- spin_unlock_irqrestore(&rdp->lock, flags);
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-#define rcu_offline_cpu_enqueue(srclist, srctail, dstlist, dsttail) do { \
- *dsttail = srclist; \
- if (srclist != NULL) { \
- dsttail = srctail; \
- srclist = NULL; \
- srctail = &srclist;\
- } \
- } while (0)
-
-void rcu_offline_cpu(int cpu)
-{
- int i;
- struct rcu_head *list = NULL;
- unsigned long flags;
- struct rcu_data *rdp = RCU_DATA_CPU(cpu);
- struct rcu_head *schedlist = NULL;
- struct rcu_head **schedtail = &schedlist;
- struct rcu_head **tail = &list;
-
- /*
- * Remove all callbacks from the newly dead CPU, retaining order.
- * Otherwise rcu_barrier() will fail
- */
-
- spin_lock_irqsave(&rdp->lock, flags);
- rcu_offline_cpu_enqueue(rdp->donelist, rdp->donetail, list, tail);
- for (i = GP_STAGES - 1; i >= 0; i--)
- rcu_offline_cpu_enqueue(rdp->waitlist[i], rdp->waittail[i],
- list, tail);
- rcu_offline_cpu_enqueue(rdp->nextlist, rdp->nexttail, list, tail);
- rcu_offline_cpu_enqueue(rdp->waitschedlist, rdp->waitschedtail,
- schedlist, schedtail);
- rcu_offline_cpu_enqueue(rdp->nextschedlist, rdp->nextschedtail,
- schedlist, schedtail);
- rdp->rcu_sched_sleeping = 0;
- spin_unlock_irqrestore(&rdp->lock, flags);
- rdp->waitlistcount = 0;
-
- /* Disengage the newly dead CPU from the grace-period computation. */
-
- spin_lock_irqsave(&rcu_ctrlblk.fliplock, flags);
- rcu_check_mb(cpu);
- if (per_cpu(rcu_flip_flag, cpu) == rcu_flipped) {
- smp_mb(); /* Subsequent counter accesses must see new value */
- per_cpu(rcu_flip_flag, cpu) = rcu_flip_seen;
- smp_mb(); /* Subsequent RCU read-side critical sections */
- /* seen -after- acknowledgement. */
- }
-
- RCU_DATA_ME()->rcu_flipctr[0] += RCU_DATA_CPU(cpu)->rcu_flipctr[0];
- RCU_DATA_ME()->rcu_flipctr[1] += RCU_DATA_CPU(cpu)->rcu_flipctr[1];
-
- RCU_DATA_CPU(cpu)->rcu_flipctr[0] = 0;
- RCU_DATA_CPU(cpu)->rcu_flipctr[1] = 0;
-
- cpumask_clear_cpu(cpu, to_cpumask(rcu_cpu_online_map));
-
- spin_unlock_irqrestore(&rcu_ctrlblk.fliplock, flags);
-
- /*
- * Place the removed callbacks on the current CPU's queue.
- * Make them all start a new grace period: simple approach,
- * in theory could starve a given set of callbacks, but
- * you would need to be doing some serious CPU hotplugging
- * to make this happen. If this becomes a problem, adding
- * a synchronize_rcu() to the hotplug path would be a simple
- * fix.
- */
-
- local_irq_save(flags); /* disable preempt till we know what lock. */
- rdp = RCU_DATA_ME();
- spin_lock(&rdp->lock);
- *rdp->nexttail = list;
- if (list)
- rdp->nexttail = tail;
- *rdp->nextschedtail = schedlist;
- if (schedlist)
- rdp->nextschedtail = schedtail;
- spin_unlock_irqrestore(&rdp->lock, flags);
-}
-
-#else /* #ifdef CONFIG_HOTPLUG_CPU */
-
-void rcu_offline_cpu(int cpu)
-{
-}
-
-#endif /* #else #ifdef CONFIG_HOTPLUG_CPU */
-
-void __cpuinit rcu_online_cpu(int cpu)
-{
- unsigned long flags;
- struct rcu_data *rdp;
-
- spin_lock_irqsave(&rcu_ctrlblk.fliplock, flags);
- cpumask_set_cpu(cpu, to_cpumask(rcu_cpu_online_map));
- spin_unlock_irqrestore(&rcu_ctrlblk.fliplock, flags);
-
- /*
- * The rcu_sched grace-period processing might have bypassed
- * this CPU, given that it was not in the rcu_cpu_online_map
- * when the grace-period scan started. This means that the
- * grace-period task might sleep. So make sure that if this
- * should happen, the first callback posted to this CPU will
- * wake up the grace-period task if need be.
- */
-
- rdp = RCU_DATA_CPU(cpu);
- spin_lock_irqsave(&rdp->lock, flags);
- rdp->rcu_sched_sleeping = 1;
- spin_unlock_irqrestore(&rdp->lock, flags);
-}
-
-static void rcu_process_callbacks(struct softirq_action *unused)
-{
- unsigned long flags;
- struct rcu_head *next, *list;
- struct rcu_data *rdp;
-
- local_irq_save(flags);
- rdp = RCU_DATA_ME();
- spin_lock(&rdp->lock);
- list = rdp->donelist;
- if (list == NULL) {
- spin_unlock_irqrestore(&rdp->lock, flags);
- return;
- }
- rdp->donelist = NULL;
- rdp->donetail = &rdp->donelist;
- RCU_TRACE_RDP(rcupreempt_trace_done_remove, rdp);
- spin_unlock_irqrestore(&rdp->lock, flags);
- while (list) {
- next = list->next;
- list->func(list);
- list = next;
- RCU_TRACE_ME(rcupreempt_trace_invoke);
- }
-}
-
-void call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu))
-{
- unsigned long flags;
- struct rcu_data *rdp;
-
- head->func = func;
- head->next = NULL;
- local_irq_save(flags);
- rdp = RCU_DATA_ME();
- spin_lock(&rdp->lock);
- __rcu_advance_callbacks(rdp);
- *rdp->nexttail = head;
- rdp->nexttail = &head->next;
- RCU_TRACE_RDP(rcupreempt_trace_next_add, rdp);
- spin_unlock_irqrestore(&rdp->lock, flags);
-}
-EXPORT_SYMBOL_GPL(call_rcu);
-
-void call_rcu_sched(struct rcu_head *head, void (*func)(struct rcu_head *rcu))
-{
- unsigned long flags;
- struct rcu_data *rdp;
- int wake_gp = 0;
-
- head->func = func;
- head->next = NULL;
- local_irq_save(flags);
- rdp = RCU_DATA_ME();
- spin_lock(&rdp->lock);
- *rdp->nextschedtail = head;
- rdp->nextschedtail = &head->next;
- if (rdp->rcu_sched_sleeping) {
-
- /* Grace-period processing might be sleeping... */
-
- rdp->rcu_sched_sleeping = 0;
- wake_gp = 1;
- }
- spin_unlock_irqrestore(&rdp->lock, flags);
- if (wake_gp) {
-
- /* Wake up grace-period processing, unless someone beat us. */
-
- spin_lock_irqsave(&rcu_ctrlblk.schedlock, flags);
- if (rcu_ctrlblk.sched_sleep != rcu_sched_sleeping)
- wake_gp = 0;
- rcu_ctrlblk.sched_sleep = rcu_sched_not_sleeping;
- spin_unlock_irqrestore(&rcu_ctrlblk.schedlock, flags);
- if (wake_gp)
- wake_up_interruptible(&rcu_ctrlblk.sched_wq);
- }
-}
-EXPORT_SYMBOL_GPL(call_rcu_sched);
-
-/*
- * Wait until all currently running preempt_disable() code segments
- * (including hardware-irq-disable segments) complete. Note that
- * in -rt this does -not- necessarily result in all currently executing
- * interrupt -handlers- having completed.
- */
-void __synchronize_sched(void)
-{
- struct rcu_synchronize rcu;
-
- if (num_online_cpus() == 1)
- return; /* blocking is gp if only one CPU! */
-
- init_completion(&rcu.completion);
- /* Will wake me after RCU finished. */
- call_rcu_sched(&rcu.head, wakeme_after_rcu);
- /* Wait for it. */
- wait_for_completion(&rcu.completion);
-}
-EXPORT_SYMBOL_GPL(__synchronize_sched);
-
-/*
- * kthread function that manages call_rcu_sched grace periods.
- */
-static int rcu_sched_grace_period(void *arg)
-{
- int couldsleep; /* might sleep after current pass. */
- int couldsleepnext = 0; /* might sleep after next pass. */
- int cpu;
- unsigned long flags;
- struct rcu_data *rdp;
- int ret;
-
- /*
- * Each pass through the following loop handles one
- * rcu_sched grace period cycle.
- */
- do {
- /* Save each CPU's current state. */
-
- for_each_online_cpu(cpu) {
- dyntick_save_progress_counter_sched(cpu);
- save_qsctr_sched(cpu);
- }
-
- /*
- * Sleep for about an RCU grace-period's worth to
- * allow better batching and to consume less CPU.
- */
- schedule_timeout_interruptible(RCU_SCHED_BATCH_TIME);
-
- /*
- * If there was nothing to do last time, prepare to
- * sleep at the end of the current grace period cycle.
- */
- couldsleep = couldsleepnext;
- couldsleepnext = 1;
- if (couldsleep) {
- spin_lock_irqsave(&rcu_ctrlblk.schedlock, flags);
- rcu_ctrlblk.sched_sleep = rcu_sched_sleep_prep;
- spin_unlock_irqrestore(&rcu_ctrlblk.schedlock, flags);
- }
-
- /*
- * Wait on each CPU in turn to have either visited
- * a quiescent state or been in dynticks-idle mode.
- */
- for_each_online_cpu(cpu) {
- while (rcu_qsctr_inc_needed(cpu) &&
- rcu_qsctr_inc_needed_dyntick(cpu)) {
- /* resched_cpu(cpu); @@@ */
- schedule_timeout_interruptible(1);
- }
- }
-
- /* Advance callbacks for each CPU. */
-
- for_each_online_cpu(cpu) {
-
- rdp = RCU_DATA_CPU(cpu);
- spin_lock_irqsave(&rdp->lock, flags);
-
- /*
- * We are running on this CPU irq-disabled, so no
- * CPU can go offline until we re-enable irqs.
- * The current CPU might have already gone
- * offline (between the for_each_offline_cpu and
- * the spin_lock_irqsave), but in that case all its
- * callback lists will be empty, so no harm done.
- *
- * Advance the callbacks! We share normal RCU's
- * donelist, since callbacks are invoked the
- * same way in either case.
- */
- if (rdp->waitschedlist != NULL) {
- *rdp->donetail = rdp->waitschedlist;
- rdp->donetail = rdp->waitschedtail;
-
- /*
- * Next rcu_check_callbacks() will
- * do the required raise_softirq().
- */
- }
- if (rdp->nextschedlist != NULL) {
- rdp->waitschedlist = rdp->nextschedlist;
- rdp->waitschedtail = rdp->nextschedtail;
- couldsleep = 0;
- couldsleepnext = 0;
- } else {
- rdp->waitschedlist = NULL;
- rdp->waitschedtail = &rdp->waitschedlist;
- }
- rdp->nextschedlist = NULL;
- rdp->nextschedtail = &rdp->nextschedlist;
-
- /* Mark sleep intention. */
-
- rdp->rcu_sched_sleeping = couldsleep;
-
- spin_unlock_irqrestore(&rdp->lock, flags);
- }
-
- /* If we saw callbacks on the last scan, go deal with them. */
-
- if (!couldsleep)
- continue;
-
- /* Attempt to block... */
-
- spin_lock_irqsave(&rcu_ctrlblk.schedlock, flags);
- if (rcu_ctrlblk.sched_sleep != rcu_sched_sleep_prep) {
-
- /*
- * Someone posted a callback after we scanned.
- * Go take care of it.
- */
- spin_unlock_irqrestore(&rcu_ctrlblk.schedlock, flags);
- couldsleepnext = 0;
- continue;
- }
-
- /* Block until the next person posts a callback. */
-
- rcu_ctrlblk.sched_sleep = rcu_sched_sleeping;
- spin_unlock_irqrestore(&rcu_ctrlblk.schedlock, flags);
- ret = 0; /* unused */
- __wait_event_interruptible(rcu_ctrlblk.sched_wq,
- rcu_ctrlblk.sched_sleep != rcu_sched_sleeping,
- ret);
-
- couldsleepnext = 0;
-
- } while (!kthread_should_stop());
-
- return (0);
-}
-
-/*
- * Check to see if any future RCU-related work will need to be done
- * by the current CPU, even if none need be done immediately, returning
- * 1 if so. Assumes that notifiers would take care of handling any
- * outstanding requests from the RCU core.
- *
- * This function is part of the RCU implementation; it is -not-
- * an exported member of the RCU API.
- */
-int rcu_needs_cpu(int cpu)
-{
- struct rcu_data *rdp = RCU_DATA_CPU(cpu);
-
- return (rdp->donelist != NULL ||
- !!rdp->waitlistcount ||
- rdp->nextlist != NULL ||
- rdp->nextschedlist != NULL ||
- rdp->waitschedlist != NULL);
-}
-
-int rcu_pending(int cpu)
-{
- struct rcu_data *rdp = RCU_DATA_CPU(cpu);
-
- /* The CPU has at least one callback queued somewhere. */
-
- if (rdp->donelist != NULL ||
- !!rdp->waitlistcount ||
- rdp->nextlist != NULL ||
- rdp->nextschedlist != NULL ||
- rdp->waitschedlist != NULL)
- return 1;
-
- /* The RCU core needs an acknowledgement from this CPU. */
-
- if ((per_cpu(rcu_flip_flag, cpu) == rcu_flipped) ||
- (per_cpu(rcu_mb_flag, cpu) == rcu_mb_needed))
- return 1;
-
- /* This CPU has fallen behind the global grace-period number. */
-
- if (rdp->completed != rcu_ctrlblk.completed)
- return 1;
-
- /* Nothing needed from this CPU. */
-
- return 0;
-}
-
-static int __cpuinit rcu_cpu_notify(struct notifier_block *self,
- unsigned long action, void *hcpu)
-{
- long cpu = (long)hcpu;
-
- switch (action) {
- case CPU_UP_PREPARE:
- case CPU_UP_PREPARE_FROZEN:
- rcu_online_cpu(cpu);
- break;
- case CPU_UP_CANCELED:
- case CPU_UP_CANCELED_FROZEN:
- case CPU_DEAD:
- case CPU_DEAD_FROZEN:
- rcu_offline_cpu(cpu);
- break;
- default:
- break;
- }
- return NOTIFY_OK;
-}
-
-static struct notifier_block __cpuinitdata rcu_nb = {
- .notifier_call = rcu_cpu_notify,
-};
-
-void __init __rcu_init(void)
-{
- int cpu;
- int i;
- struct rcu_data *rdp;
-
- printk(KERN_NOTICE "Preemptible RCU implementation.\n");
- for_each_possible_cpu(cpu) {
- rdp = RCU_DATA_CPU(cpu);
- spin_lock_init(&rdp->lock);
- rdp->completed = 0;
- rdp->waitlistcount = 0;
- rdp->nextlist = NULL;
- rdp->nexttail = &rdp->nextlist;
- for (i = 0; i < GP_STAGES; i++) {
- rdp->waitlist[i] = NULL;
- rdp->waittail[i] = &rdp->waitlist[i];
- }
- rdp->donelist = NULL;
- rdp->donetail = &rdp->donelist;
- rdp->rcu_flipctr[0] = 0;
- rdp->rcu_flipctr[1] = 0;
- rdp->nextschedlist = NULL;
- rdp->nextschedtail = &rdp->nextschedlist;
- rdp->waitschedlist = NULL;
- rdp->waitschedtail = &rdp->waitschedlist;
- rdp->rcu_sched_sleeping = 0;
- }
- register_cpu_notifier(&rcu_nb);
-
- /*
- * We don't need protection against CPU-Hotplug here
- * since
- * a) If a CPU comes online while we are iterating over the
- * cpu_online_mask below, we would only end up making a
- * duplicate call to rcu_online_cpu() which sets the corresponding
- * CPU's mask in the rcu_cpu_online_map.
- *
- * b) A CPU cannot go offline at this point in time since the user
- * does not have access to the sysfs interface, nor do we
- * suspend the system.
- */
- for_each_online_cpu(cpu)
- rcu_cpu_notify(&rcu_nb, CPU_UP_PREPARE, (void *)(long) cpu);
-
- open_softirq(RCU_SOFTIRQ, rcu_process_callbacks);
-}
-
-/*
- * Late-boot-time RCU initialization that must wait until after scheduler
- * has been initialized.
- */
-void __init rcu_init_sched(void)
-{
- rcu_sched_grace_period_task = kthread_run(rcu_sched_grace_period,
- NULL,
- "rcu_sched_grace_period");
- WARN_ON(IS_ERR(rcu_sched_grace_period_task));
-}
-
-#ifdef CONFIG_RCU_TRACE
-long *rcupreempt_flipctr(int cpu)
-{
- return &RCU_DATA_CPU(cpu)->rcu_flipctr[0];
-}
-EXPORT_SYMBOL_GPL(rcupreempt_flipctr);
-
-int rcupreempt_flip_flag(int cpu)
-{
- return per_cpu(rcu_flip_flag, cpu);
-}
-EXPORT_SYMBOL_GPL(rcupreempt_flip_flag);
-
-int rcupreempt_mb_flag(int cpu)
-{
- return per_cpu(rcu_mb_flag, cpu);
-}
-EXPORT_SYMBOL_GPL(rcupreempt_mb_flag);
-
-char *rcupreempt_try_flip_state_name(void)
-{
- return rcu_try_flip_state_names[rcu_ctrlblk.rcu_try_flip_state];
-}
-EXPORT_SYMBOL_GPL(rcupreempt_try_flip_state_name);
-
-struct rcupreempt_trace *rcupreempt_trace_cpu(int cpu)
-{
- struct rcu_data *rdp = RCU_DATA_CPU(cpu);
-
- return &rdp->trace;
-}
-EXPORT_SYMBOL_GPL(rcupreempt_trace_cpu);
-
-#endif /* #ifdef RCU_TRACE */
+++ /dev/null
-/*
- * Read-Copy Update tracing for realtime implementation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright IBM Corporation, 2006
- *
- * Papers: http://www.rdrop.com/users/paulmck/RCU
- *
- * For detailed explanation of Read-Copy Update mechanism see -
- * Documentation/RCU/ *.txt
- *
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/smp.h>
-#include <linux/rcupdate.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <asm/atomic.h>
-#include <linux/bitops.h>
-#include <linux/module.h>
-#include <linux/completion.h>
-#include <linux/moduleparam.h>
-#include <linux/percpu.h>
-#include <linux/notifier.h>
-#include <linux/cpu.h>
-#include <linux/mutex.h>
-#include <linux/rcupreempt_trace.h>
-#include <linux/debugfs.h>
-
-static struct mutex rcupreempt_trace_mutex;
-static char *rcupreempt_trace_buf;
-#define RCUPREEMPT_TRACE_BUF_SIZE 4096
-
-void rcupreempt_trace_move2done(struct rcupreempt_trace *trace)
-{
- trace->done_length += trace->wait_length;
- trace->done_add += trace->wait_length;
- trace->wait_length = 0;
-}
-void rcupreempt_trace_move2wait(struct rcupreempt_trace *trace)
-{
- trace->wait_length += trace->next_length;
- trace->wait_add += trace->next_length;
- trace->next_length = 0;
-}
-void rcupreempt_trace_try_flip_1(struct rcupreempt_trace *trace)
-{
- atomic_inc(&trace->rcu_try_flip_1);
-}
-void rcupreempt_trace_try_flip_e1(struct rcupreempt_trace *trace)
-{
- atomic_inc(&trace->rcu_try_flip_e1);
-}
-void rcupreempt_trace_try_flip_i1(struct rcupreempt_trace *trace)
-{
- trace->rcu_try_flip_i1++;
-}
-void rcupreempt_trace_try_flip_ie1(struct rcupreempt_trace *trace)
-{
- trace->rcu_try_flip_ie1++;
-}
-void rcupreempt_trace_try_flip_g1(struct rcupreempt_trace *trace)
-{
- trace->rcu_try_flip_g1++;
-}
-void rcupreempt_trace_try_flip_a1(struct rcupreempt_trace *trace)
-{
- trace->rcu_try_flip_a1++;
-}
-void rcupreempt_trace_try_flip_ae1(struct rcupreempt_trace *trace)
-{
- trace->rcu_try_flip_ae1++;
-}
-void rcupreempt_trace_try_flip_a2(struct rcupreempt_trace *trace)
-{
- trace->rcu_try_flip_a2++;
-}
-void rcupreempt_trace_try_flip_z1(struct rcupreempt_trace *trace)
-{
- trace->rcu_try_flip_z1++;
-}
-void rcupreempt_trace_try_flip_ze1(struct rcupreempt_trace *trace)
-{
- trace->rcu_try_flip_ze1++;
-}
-void rcupreempt_trace_try_flip_z2(struct rcupreempt_trace *trace)
-{
- trace->rcu_try_flip_z2++;
-}
-void rcupreempt_trace_try_flip_m1(struct rcupreempt_trace *trace)
-{
- trace->rcu_try_flip_m1++;
-}
-void rcupreempt_trace_try_flip_me1(struct rcupreempt_trace *trace)
-{
- trace->rcu_try_flip_me1++;
-}
-void rcupreempt_trace_try_flip_m2(struct rcupreempt_trace *trace)
-{
- trace->rcu_try_flip_m2++;
-}
-void rcupreempt_trace_check_callbacks(struct rcupreempt_trace *trace)
-{
- trace->rcu_check_callbacks++;
-}
-void rcupreempt_trace_done_remove(struct rcupreempt_trace *trace)
-{
- trace->done_remove += trace->done_length;
- trace->done_length = 0;
-}
-void rcupreempt_trace_invoke(struct rcupreempt_trace *trace)
-{
- atomic_inc(&trace->done_invoked);
-}
-void rcupreempt_trace_next_add(struct rcupreempt_trace *trace)
-{
- trace->next_add++;
- trace->next_length++;
-}
-
-static void rcupreempt_trace_sum(struct rcupreempt_trace *sp)
-{
- struct rcupreempt_trace *cp;
- int cpu;
-
- memset(sp, 0, sizeof(*sp));
- for_each_possible_cpu(cpu) {
- cp = rcupreempt_trace_cpu(cpu);
- sp->next_length += cp->next_length;
- sp->next_add += cp->next_add;
- sp->wait_length += cp->wait_length;
- sp->wait_add += cp->wait_add;
- sp->done_length += cp->done_length;
- sp->done_add += cp->done_add;
- sp->done_remove += cp->done_remove;
- atomic_add(atomic_read(&cp->done_invoked), &sp->done_invoked);
- sp->rcu_check_callbacks += cp->rcu_check_callbacks;
- atomic_add(atomic_read(&cp->rcu_try_flip_1),
- &sp->rcu_try_flip_1);
- atomic_add(atomic_read(&cp->rcu_try_flip_e1),
- &sp->rcu_try_flip_e1);
- sp->rcu_try_flip_i1 += cp->rcu_try_flip_i1;
- sp->rcu_try_flip_ie1 += cp->rcu_try_flip_ie1;
- sp->rcu_try_flip_g1 += cp->rcu_try_flip_g1;
- sp->rcu_try_flip_a1 += cp->rcu_try_flip_a1;
- sp->rcu_try_flip_ae1 += cp->rcu_try_flip_ae1;
- sp->rcu_try_flip_a2 += cp->rcu_try_flip_a2;
- sp->rcu_try_flip_z1 += cp->rcu_try_flip_z1;
- sp->rcu_try_flip_ze1 += cp->rcu_try_flip_ze1;
- sp->rcu_try_flip_z2 += cp->rcu_try_flip_z2;
- sp->rcu_try_flip_m1 += cp->rcu_try_flip_m1;
- sp->rcu_try_flip_me1 += cp->rcu_try_flip_me1;
- sp->rcu_try_flip_m2 += cp->rcu_try_flip_m2;
- }
-}
-
-static ssize_t rcustats_read(struct file *filp, char __user *buffer,
- size_t count, loff_t *ppos)
-{
- struct rcupreempt_trace trace;
- ssize_t bcount;
- int cnt = 0;
-
- rcupreempt_trace_sum(&trace);
- mutex_lock(&rcupreempt_trace_mutex);
- snprintf(&rcupreempt_trace_buf[cnt], RCUPREEMPT_TRACE_BUF_SIZE - cnt,
- "ggp=%ld rcc=%ld\n",
- rcu_batches_completed(),
- trace.rcu_check_callbacks);
- snprintf(&rcupreempt_trace_buf[cnt], RCUPREEMPT_TRACE_BUF_SIZE - cnt,
- "na=%ld nl=%ld wa=%ld wl=%ld da=%ld dl=%ld dr=%ld di=%d\n"
- "1=%d e1=%d i1=%ld ie1=%ld g1=%ld a1=%ld ae1=%ld a2=%ld\n"
- "z1=%ld ze1=%ld z2=%ld m1=%ld me1=%ld m2=%ld\n",
-
- trace.next_add, trace.next_length,
- trace.wait_add, trace.wait_length,
- trace.done_add, trace.done_length,
- trace.done_remove, atomic_read(&trace.done_invoked),
- atomic_read(&trace.rcu_try_flip_1),
- atomic_read(&trace.rcu_try_flip_e1),
- trace.rcu_try_flip_i1, trace.rcu_try_flip_ie1,
- trace.rcu_try_flip_g1,
- trace.rcu_try_flip_a1, trace.rcu_try_flip_ae1,
- trace.rcu_try_flip_a2,
- trace.rcu_try_flip_z1, trace.rcu_try_flip_ze1,
- trace.rcu_try_flip_z2,
- trace.rcu_try_flip_m1, trace.rcu_try_flip_me1,
- trace.rcu_try_flip_m2);
- bcount = simple_read_from_buffer(buffer, count, ppos,
- rcupreempt_trace_buf, strlen(rcupreempt_trace_buf));
- mutex_unlock(&rcupreempt_trace_mutex);
- return bcount;
-}
-
-static ssize_t rcugp_read(struct file *filp, char __user *buffer,
- size_t count, loff_t *ppos)
-{
- long oldgp = rcu_batches_completed();
- ssize_t bcount;
-
- mutex_lock(&rcupreempt_trace_mutex);
- synchronize_rcu();
- snprintf(rcupreempt_trace_buf, RCUPREEMPT_TRACE_BUF_SIZE,
- "oldggp=%ld newggp=%ld\n", oldgp, rcu_batches_completed());
- bcount = simple_read_from_buffer(buffer, count, ppos,
- rcupreempt_trace_buf, strlen(rcupreempt_trace_buf));
- mutex_unlock(&rcupreempt_trace_mutex);
- return bcount;
-}
-
-static ssize_t rcuctrs_read(struct file *filp, char __user *buffer,
- size_t count, loff_t *ppos)
-{
- int cnt = 0;
- int cpu;
- int f = rcu_batches_completed() & 0x1;
- ssize_t bcount;
-
- mutex_lock(&rcupreempt_trace_mutex);
-
- cnt += snprintf(&rcupreempt_trace_buf[cnt], RCUPREEMPT_TRACE_BUF_SIZE,
- "CPU last cur F M\n");
- for_each_online_cpu(cpu) {
- long *flipctr = rcupreempt_flipctr(cpu);
- cnt += snprintf(&rcupreempt_trace_buf[cnt],
- RCUPREEMPT_TRACE_BUF_SIZE - cnt,
- "%3d %4ld %3ld %d %d\n",
- cpu,
- flipctr[!f],
- flipctr[f],
- rcupreempt_flip_flag(cpu),
- rcupreempt_mb_flag(cpu));
- }
- cnt += snprintf(&rcupreempt_trace_buf[cnt],
- RCUPREEMPT_TRACE_BUF_SIZE - cnt,
- "ggp = %ld, state = %s\n",
- rcu_batches_completed(),
- rcupreempt_try_flip_state_name());
- cnt += snprintf(&rcupreempt_trace_buf[cnt],
- RCUPREEMPT_TRACE_BUF_SIZE - cnt,
- "\n");
- bcount = simple_read_from_buffer(buffer, count, ppos,
- rcupreempt_trace_buf, strlen(rcupreempt_trace_buf));
- mutex_unlock(&rcupreempt_trace_mutex);
- return bcount;
-}
-
-static struct file_operations rcustats_fops = {
- .owner = THIS_MODULE,
- .read = rcustats_read,
-};
-
-static struct file_operations rcugp_fops = {
- .owner = THIS_MODULE,
- .read = rcugp_read,
-};
-
-static struct file_operations rcuctrs_fops = {
- .owner = THIS_MODULE,
- .read = rcuctrs_read,
-};
-
-static struct dentry *rcudir, *statdir, *ctrsdir, *gpdir;
-static int rcupreempt_debugfs_init(void)
-{
- rcudir = debugfs_create_dir("rcu", NULL);
- if (!rcudir)
- goto out;
- statdir = debugfs_create_file("rcustats", 0444, rcudir,
- NULL, &rcustats_fops);
- if (!statdir)
- goto free_out;
-
- gpdir = debugfs_create_file("rcugp", 0444, rcudir, NULL, &rcugp_fops);
- if (!gpdir)
- goto free_out;
-
- ctrsdir = debugfs_create_file("rcuctrs", 0444, rcudir,
- NULL, &rcuctrs_fops);
- if (!ctrsdir)
- goto free_out;
- return 0;
-free_out:
- if (statdir)
- debugfs_remove(statdir);
- if (gpdir)
- debugfs_remove(gpdir);
- debugfs_remove(rcudir);
-out:
- return 1;
-}
-
-static int __init rcupreempt_trace_init(void)
-{
- int ret;
-
- mutex_init(&rcupreempt_trace_mutex);
- rcupreempt_trace_buf = kmalloc(RCUPREEMPT_TRACE_BUF_SIZE, GFP_KERNEL);
- if (!rcupreempt_trace_buf)
- return 1;
- ret = rcupreempt_debugfs_init();
- if (ret)
- kfree(rcupreempt_trace_buf);
- return ret;
-}
-
-static void __exit rcupreempt_trace_cleanup(void)
-{
- debugfs_remove(statdir);
- debugfs_remove(gpdir);
- debugfs_remove(ctrsdir);
- debugfs_remove(rcudir);
- kfree(rcupreempt_trace_buf);
-}
-
-
-module_init(rcupreempt_trace_init);
-module_exit(rcupreempt_trace_cleanup);
void (*init)(void);
void (*cleanup)(void);
int (*readlock)(void);
- void (*readdelay)(struct rcu_random_state *rrsp);
+ void (*read_delay)(struct rcu_random_state *rrsp);
void (*readunlock)(int idx);
int (*completed)(void);
- void (*deferredfree)(struct rcu_torture *p);
+ void (*deferred_free)(struct rcu_torture *p);
void (*sync)(void);
void (*cb_barrier)(void);
int (*stats)(char *page);
- int irqcapable;
+ int irq_capable;
char *name;
};
static struct rcu_torture_ops *cur_ops = NULL;
rp->rtort_mbtest = 0;
rcu_torture_free(rp);
} else
- cur_ops->deferredfree(rp);
+ cur_ops->deferred_free(rp);
}
static void rcu_torture_deferred_free(struct rcu_torture *p)
}
static struct rcu_torture_ops rcu_ops = {
- .init = NULL,
- .cleanup = NULL,
- .readlock = rcu_torture_read_lock,
- .readdelay = rcu_read_delay,
- .readunlock = rcu_torture_read_unlock,
- .completed = rcu_torture_completed,
- .deferredfree = rcu_torture_deferred_free,
- .sync = synchronize_rcu,
- .cb_barrier = rcu_barrier,
- .stats = NULL,
- .irqcapable = 1,
- .name = "rcu"
+ .init = NULL,
+ .cleanup = NULL,
+ .readlock = rcu_torture_read_lock,
+ .read_delay = rcu_read_delay,
+ .readunlock = rcu_torture_read_unlock,
+ .completed = rcu_torture_completed,
+ .deferred_free = rcu_torture_deferred_free,
+ .sync = synchronize_rcu,
+ .cb_barrier = rcu_barrier,
+ .stats = NULL,
+ .irq_capable = 1,
+ .name = "rcu"
};
static void rcu_sync_torture_deferred_free(struct rcu_torture *p)
}
static struct rcu_torture_ops rcu_sync_ops = {
- .init = rcu_sync_torture_init,
- .cleanup = NULL,
- .readlock = rcu_torture_read_lock,
- .readdelay = rcu_read_delay,
- .readunlock = rcu_torture_read_unlock,
- .completed = rcu_torture_completed,
- .deferredfree = rcu_sync_torture_deferred_free,
- .sync = synchronize_rcu,
- .cb_barrier = NULL,
- .stats = NULL,
- .irqcapable = 1,
- .name = "rcu_sync"
+ .init = rcu_sync_torture_init,
+ .cleanup = NULL,
+ .readlock = rcu_torture_read_lock,
+ .read_delay = rcu_read_delay,
+ .readunlock = rcu_torture_read_unlock,
+ .completed = rcu_torture_completed,
+ .deferred_free = rcu_sync_torture_deferred_free,
+ .sync = synchronize_rcu,
+ .cb_barrier = NULL,
+ .stats = NULL,
+ .irq_capable = 1,
+ .name = "rcu_sync"
};
/*
}
static struct rcu_torture_ops rcu_bh_ops = {
- .init = NULL,
- .cleanup = NULL,
- .readlock = rcu_bh_torture_read_lock,
- .readdelay = rcu_read_delay, /* just reuse rcu's version. */
- .readunlock = rcu_bh_torture_read_unlock,
- .completed = rcu_bh_torture_completed,
- .deferredfree = rcu_bh_torture_deferred_free,
- .sync = rcu_bh_torture_synchronize,
- .cb_barrier = rcu_barrier_bh,
- .stats = NULL,
- .irqcapable = 1,
- .name = "rcu_bh"
+ .init = NULL,
+ .cleanup = NULL,
+ .readlock = rcu_bh_torture_read_lock,
+ .read_delay = rcu_read_delay, /* just reuse rcu's version. */
+ .readunlock = rcu_bh_torture_read_unlock,
+ .completed = rcu_bh_torture_completed,
+ .deferred_free = rcu_bh_torture_deferred_free,
+ .sync = rcu_bh_torture_synchronize,
+ .cb_barrier = rcu_barrier_bh,
+ .stats = NULL,
+ .irq_capable = 1,
+ .name = "rcu_bh"
};
static struct rcu_torture_ops rcu_bh_sync_ops = {
- .init = rcu_sync_torture_init,
- .cleanup = NULL,
- .readlock = rcu_bh_torture_read_lock,
- .readdelay = rcu_read_delay, /* just reuse rcu's version. */
- .readunlock = rcu_bh_torture_read_unlock,
- .completed = rcu_bh_torture_completed,
- .deferredfree = rcu_sync_torture_deferred_free,
- .sync = rcu_bh_torture_synchronize,
- .cb_barrier = NULL,
- .stats = NULL,
- .irqcapable = 1,
- .name = "rcu_bh_sync"
+ .init = rcu_sync_torture_init,
+ .cleanup = NULL,
+ .readlock = rcu_bh_torture_read_lock,
+ .read_delay = rcu_read_delay, /* just reuse rcu's version. */
+ .readunlock = rcu_bh_torture_read_unlock,
+ .completed = rcu_bh_torture_completed,
+ .deferred_free = rcu_sync_torture_deferred_free,
+ .sync = rcu_bh_torture_synchronize,
+ .cb_barrier = NULL,
+ .stats = NULL,
+ .irq_capable = 1,
+ .name = "rcu_bh_sync"
};
/*
}
static struct rcu_torture_ops srcu_ops = {
- .init = srcu_torture_init,
- .cleanup = srcu_torture_cleanup,
- .readlock = srcu_torture_read_lock,
- .readdelay = srcu_read_delay,
- .readunlock = srcu_torture_read_unlock,
- .completed = srcu_torture_completed,
- .deferredfree = rcu_sync_torture_deferred_free,
- .sync = srcu_torture_synchronize,
- .cb_barrier = NULL,
- .stats = srcu_torture_stats,
- .name = "srcu"
+ .init = srcu_torture_init,
+ .cleanup = srcu_torture_cleanup,
+ .readlock = srcu_torture_read_lock,
+ .read_delay = srcu_read_delay,
+ .readunlock = srcu_torture_read_unlock,
+ .completed = srcu_torture_completed,
+ .deferred_free = rcu_sync_torture_deferred_free,
+ .sync = srcu_torture_synchronize,
+ .cb_barrier = NULL,
+ .stats = srcu_torture_stats,
+ .name = "srcu"
};
/*
}
static struct rcu_torture_ops sched_ops = {
- .init = rcu_sync_torture_init,
- .cleanup = NULL,
- .readlock = sched_torture_read_lock,
- .readdelay = rcu_read_delay, /* just reuse rcu's version. */
- .readunlock = sched_torture_read_unlock,
- .completed = sched_torture_completed,
- .deferredfree = rcu_sched_torture_deferred_free,
- .sync = sched_torture_synchronize,
- .cb_barrier = rcu_barrier_sched,
- .stats = NULL,
- .irqcapable = 1,
- .name = "sched"
+ .init = rcu_sync_torture_init,
+ .cleanup = NULL,
+ .readlock = sched_torture_read_lock,
+ .read_delay = rcu_read_delay, /* just reuse rcu's version. */
+ .readunlock = sched_torture_read_unlock,
+ .completed = sched_torture_completed,
+ .deferred_free = rcu_sched_torture_deferred_free,
+ .sync = sched_torture_synchronize,
+ .cb_barrier = rcu_barrier_sched,
+ .stats = NULL,
+ .irq_capable = 1,
+ .name = "sched"
};
static struct rcu_torture_ops sched_ops_sync = {
- .init = rcu_sync_torture_init,
- .cleanup = NULL,
- .readlock = sched_torture_read_lock,
- .readdelay = rcu_read_delay, /* just reuse rcu's version. */
- .readunlock = sched_torture_read_unlock,
- .completed = sched_torture_completed,
- .deferredfree = rcu_sync_torture_deferred_free,
- .sync = sched_torture_synchronize,
- .cb_barrier = NULL,
- .stats = NULL,
- .name = "sched_sync"
+ .init = rcu_sync_torture_init,
+ .cleanup = NULL,
+ .readlock = sched_torture_read_lock,
+ .read_delay = rcu_read_delay, /* just reuse rcu's version. */
+ .readunlock = sched_torture_read_unlock,
+ .completed = sched_torture_completed,
+ .deferred_free = rcu_sync_torture_deferred_free,
+ .sync = sched_torture_synchronize,
+ .cb_barrier = NULL,
+ .stats = NULL,
+ .name = "sched_sync"
+};
+
+extern int rcu_expedited_torture_stats(char *page);
+
+static struct rcu_torture_ops sched_expedited_ops = {
+ .init = rcu_sync_torture_init,
+ .cleanup = NULL,
+ .readlock = sched_torture_read_lock,
+ .read_delay = rcu_read_delay, /* just reuse rcu's version. */
+ .readunlock = sched_torture_read_unlock,
+ .completed = sched_torture_completed,
+ .deferred_free = rcu_sync_torture_deferred_free,
+ .sync = synchronize_sched_expedited,
+ .cb_barrier = NULL,
+ .stats = rcu_expedited_torture_stats,
+ .irq_capable = 1,
+ .name = "sched_expedited"
};
/*
i = RCU_TORTURE_PIPE_LEN;
atomic_inc(&rcu_torture_wcount[i]);
old_rp->rtort_pipe_count++;
- cur_ops->deferredfree(old_rp);
+ cur_ops->deferred_free(old_rp);
}
rcu_torture_current_version++;
oldbatch = cur_ops->completed();
if (p->rtort_mbtest == 0)
atomic_inc(&n_rcu_torture_mberror);
spin_lock(&rand_lock);
- cur_ops->readdelay(&rand);
+ cur_ops->read_delay(&rand);
n_rcu_torture_timers++;
spin_unlock(&rand_lock);
preempt_disable();
VERBOSE_PRINTK_STRING("rcu_torture_reader task started");
set_user_nice(current, 19);
- if (irqreader && cur_ops->irqcapable)
+ if (irqreader && cur_ops->irq_capable)
setup_timer_on_stack(&t, rcu_torture_timer, 0);
do {
- if (irqreader && cur_ops->irqcapable) {
+ if (irqreader && cur_ops->irq_capable) {
if (!timer_pending(&t))
mod_timer(&t, 1);
}
}
if (p->rtort_mbtest == 0)
atomic_inc(&n_rcu_torture_mberror);
- cur_ops->readdelay(&rand);
+ cur_ops->read_delay(&rand);
preempt_disable();
pipe_count = p->rtort_pipe_count;
if (pipe_count > RCU_TORTURE_PIPE_LEN) {
} while (!kthread_should_stop() && fullstop == FULLSTOP_DONTSTOP);
VERBOSE_PRINTK_STRING("rcu_torture_reader task stopping");
rcutorture_shutdown_absorb("rcu_torture_reader");
- if (irqreader && cur_ops->irqcapable)
+ if (irqreader && cur_ops->irq_capable)
del_timer_sync(&t);
while (!kthread_should_stop())
schedule_timeout_uninterruptible(1);
int firsterr = 0;
static struct rcu_torture_ops *torture_ops[] =
{ &rcu_ops, &rcu_sync_ops, &rcu_bh_ops, &rcu_bh_sync_ops,
+ &sched_expedited_ops,
&srcu_ops, &sched_ops, &sched_ops_sync, };
mutex_lock(&fullstop_mutex);
#include <linux/rcupdate.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
+#include <linux/nmi.h>
#include <asm/atomic.h>
#include <linux/bitops.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/time.h>
+#include "rcutree.h"
+
#ifdef CONFIG_DEBUG_LOCK_ALLOC
static struct lock_class_key rcu_lock_key;
struct lockdep_map rcu_lock_map =
.n_force_qs_ngp = 0, \
}
-struct rcu_state rcu_state = RCU_STATE_INITIALIZER(rcu_state);
-DEFINE_PER_CPU(struct rcu_data, rcu_data);
+struct rcu_state rcu_sched_state = RCU_STATE_INITIALIZER(rcu_sched_state);
+DEFINE_PER_CPU(struct rcu_data, rcu_sched_data);
struct rcu_state rcu_bh_state = RCU_STATE_INITIALIZER(rcu_bh_state);
DEFINE_PER_CPU(struct rcu_data, rcu_bh_data);
+extern long rcu_batches_completed_sched(void);
+static struct rcu_node *rcu_get_root(struct rcu_state *rsp);
+static void cpu_quiet_msk(unsigned long mask, struct rcu_state *rsp,
+ struct rcu_node *rnp, unsigned long flags);
+static void cpu_quiet_msk_finish(struct rcu_state *rsp, unsigned long flags);
+#ifdef CONFIG_HOTPLUG_CPU
+static void __rcu_offline_cpu(int cpu, struct rcu_state *rsp);
+#endif /* #ifdef CONFIG_HOTPLUG_CPU */
+static void __rcu_process_callbacks(struct rcu_state *rsp,
+ struct rcu_data *rdp);
+static void __call_rcu(struct rcu_head *head,
+ void (*func)(struct rcu_head *rcu),
+ struct rcu_state *rsp);
+static int __rcu_pending(struct rcu_state *rsp, struct rcu_data *rdp);
+static void __cpuinit rcu_init_percpu_data(int cpu, struct rcu_state *rsp,
+ int preemptable);
+
+#include "rcutree_plugin.h"
+
/*
- * Increment the quiescent state counter.
- * The counter is a bit degenerated: We do not need to know
+ * Note a quiescent state. Because we do not need to know
* how many quiescent states passed, just if there was at least
- * one since the start of the grace period. Thus just a flag.
+ * one since the start of the grace period, this just sets a flag.
*/
-void rcu_qsctr_inc(int cpu)
+void rcu_sched_qs(int cpu)
{
- struct rcu_data *rdp = &per_cpu(rcu_data, cpu);
+ unsigned long flags;
+ struct rcu_data *rdp;
+
+ local_irq_save(flags);
+ rdp = &per_cpu(rcu_sched_data, cpu);
rdp->passed_quiesc = 1;
rdp->passed_quiesc_completed = rdp->completed;
+ rcu_preempt_qs(cpu);
+ local_irq_restore(flags);
}
-void rcu_bh_qsctr_inc(int cpu)
+void rcu_bh_qs(int cpu)
{
- struct rcu_data *rdp = &per_cpu(rcu_bh_data, cpu);
+ unsigned long flags;
+ struct rcu_data *rdp;
+
+ local_irq_save(flags);
+ rdp = &per_cpu(rcu_bh_data, cpu);
rdp->passed_quiesc = 1;
rdp->passed_quiesc_completed = rdp->completed;
+ local_irq_restore(flags);
}
#ifdef CONFIG_NO_HZ
static int qlowmark = 100; /* Once only this many pending, use blimit. */
static void force_quiescent_state(struct rcu_state *rsp, int relaxed);
+static int rcu_pending(int cpu);
/*
- * Return the number of RCU batches processed thus far for debug & stats.
+ * Return the number of RCU-sched batches processed thus far for debug & stats.
*/
-long rcu_batches_completed(void)
+long rcu_batches_completed_sched(void)
{
- return rcu_state.completed;
+ return rcu_sched_state.completed;
}
-EXPORT_SYMBOL_GPL(rcu_batches_completed);
+EXPORT_SYMBOL_GPL(rcu_batches_completed_sched);
/*
* Return the number of RCU BH batches processed thus far for debug & stats.
return 1;
}
+ /* If preemptable RCU, no point in sending reschedule IPI. */
+ if (rdp->preemptable)
+ return 0;
+
/* The CPU is online, so send it a reschedule IPI. */
if (rdp->cpu != smp_processor_id())
smp_send_reschedule(rdp->cpu);
#endif /* #ifdef CONFIG_SMP */
#ifdef CONFIG_NO_HZ
-static DEFINE_RATELIMIT_STATE(rcu_rs, 10 * HZ, 5);
/**
* rcu_enter_nohz - inform RCU that current CPU is entering nohz
rdtp = &__get_cpu_var(rcu_dynticks);
rdtp->dynticks++;
rdtp->dynticks_nesting--;
- WARN_ON_RATELIMIT(rdtp->dynticks & 0x1, &rcu_rs);
+ WARN_ON_ONCE(rdtp->dynticks & 0x1);
local_irq_restore(flags);
}
rdtp = &__get_cpu_var(rcu_dynticks);
rdtp->dynticks++;
rdtp->dynticks_nesting++;
- WARN_ON_RATELIMIT(!(rdtp->dynticks & 0x1), &rcu_rs);
+ WARN_ON_ONCE(!(rdtp->dynticks & 0x1));
local_irq_restore(flags);
smp_mb(); /* CPUs seeing ++ must see later RCU read-side crit sects */
}
if (rdtp->dynticks & 0x1)
return;
rdtp->dynticks_nmi++;
- WARN_ON_RATELIMIT(!(rdtp->dynticks_nmi & 0x1), &rcu_rs);
+ WARN_ON_ONCE(!(rdtp->dynticks_nmi & 0x1));
smp_mb(); /* CPUs seeing ++ must see later RCU read-side crit sects */
}
return;
smp_mb(); /* CPUs seeing ++ must see prior RCU read-side crit sects */
rdtp->dynticks_nmi++;
- WARN_ON_RATELIMIT(rdtp->dynticks_nmi & 0x1, &rcu_rs);
+ WARN_ON_ONCE(rdtp->dynticks_nmi & 0x1);
}
/**
if (rdtp->dynticks_nesting++)
return;
rdtp->dynticks++;
- WARN_ON_RATELIMIT(!(rdtp->dynticks & 0x1), &rcu_rs);
+ WARN_ON_ONCE(!(rdtp->dynticks & 0x1));
smp_mb(); /* CPUs seeing ++ must see later RCU read-side crit sects */
}
return;
smp_mb(); /* CPUs seeing ++ must see prior RCU read-side crit sects */
rdtp->dynticks++;
- WARN_ON_RATELIMIT(rdtp->dynticks & 0x1, &rcu_rs);
+ WARN_ON_ONCE(rdtp->dynticks & 0x1);
/* If the interrupt queued a callback, get out of dyntick mode. */
- if (__get_cpu_var(rcu_data).nxtlist ||
+ if (__get_cpu_var(rcu_sched_data).nxtlist ||
__get_cpu_var(rcu_bh_data).nxtlist)
set_need_resched();
}
printk(KERN_ERR "INFO: RCU detected CPU stalls:");
for (; rnp_cur < rnp_end; rnp_cur++) {
+ rcu_print_task_stall(rnp);
if (rnp_cur->qsmask == 0)
continue;
for (cpu = 0; cpu <= rnp_cur->grphi - rnp_cur->grplo; cpu++)
}
printk(" (detected by %d, t=%ld jiffies)\n",
smp_processor_id(), (long)(jiffies - rsp->gp_start));
+ trigger_all_cpu_backtrace();
+
force_quiescent_state(rsp, 0); /* Kick them all. */
}
printk(KERN_ERR "INFO: RCU detected CPU %d stall (t=%lu jiffies)\n",
smp_processor_id(), jiffies - rsp->gp_start);
- dump_stack();
+ trigger_all_cpu_backtrace();
+
spin_lock_irqsave(&rnp->lock, flags);
if ((long)(jiffies - rsp->jiffies_stall) >= 0)
rsp->jiffies_stall =
jiffies + RCU_SECONDS_TILL_STALL_RECHECK;
spin_unlock_irqrestore(&rnp->lock, flags);
+
set_need_resched(); /* kick ourselves to get things going. */
}
local_irq_restore(flags);
}
+/*
+ * Clean up after the prior grace period and let rcu_start_gp() start up
+ * the next grace period if one is needed. Note that the caller must
+ * hold rnp->lock, as required by rcu_start_gp(), which will release it.
+ */
+static void cpu_quiet_msk_finish(struct rcu_state *rsp, unsigned long flags)
+ __releases(rnp->lock)
+{
+ rsp->completed = rsp->gpnum;
+ rcu_process_gp_end(rsp, rsp->rda[smp_processor_id()]);
+ rcu_start_gp(rsp, flags); /* releases root node's rnp->lock. */
+}
+
/*
* Similar to cpu_quiet(), for which it is a helper function. Allows
* a group of CPUs to be quieted at one go, though all the CPUs in the
return;
}
rnp->qsmask &= ~mask;
- if (rnp->qsmask != 0) {
+ if (rnp->qsmask != 0 || rcu_preempted_readers(rnp)) {
/* Other bits still set at this level, so done. */
spin_unlock_irqrestore(&rnp->lock, flags);
/*
* Get here if we are the last CPU to pass through a quiescent
- * state for this grace period. Clean up and let rcu_start_gp()
- * start up the next grace period if one is needed. Note that
- * we still hold rnp->lock, as required by rcu_start_gp(), which
- * will release it.
+ * state for this grace period. Invoke cpu_quiet_msk_finish()
+ * to clean up and start the next grace period if one is needed.
*/
- rsp->completed = rsp->gpnum;
- rcu_process_gp_end(rsp, rsp->rda[smp_processor_id()]);
- rcu_start_gp(rsp, flags); /* releases rnp->lock. */
+ cpu_quiet_msk_finish(rsp, flags); /* releases rnp->lock. */
}
/*
spin_lock(&rnp->lock); /* irqs already disabled. */
rnp->qsmaskinit &= ~mask;
if (rnp->qsmaskinit != 0) {
- spin_unlock(&rnp->lock); /* irqs already disabled. */
+ spin_unlock(&rnp->lock); /* irqs remain disabled. */
break;
}
+ rcu_preempt_offline_tasks(rsp, rnp);
mask = rnp->grpmask;
- spin_unlock(&rnp->lock); /* irqs already disabled. */
+ spin_unlock(&rnp->lock); /* irqs remain disabled. */
rnp = rnp->parent;
} while (rnp != NULL);
lastcomp = rsp->completed;
/*
* Move callbacks from the outgoing CPU to the running CPU.
* Note that the outgoing CPU is now quiscent, so it is now
- * (uncharacteristically) safe to access it rcu_data structure.
+ * (uncharacteristically) safe to access its rcu_data structure.
* Note also that we must carefully retain the order of the
* outgoing CPU's callbacks in order for rcu_barrier() to work
* correctly. Finally, note that we start all the callbacks
*/
static void rcu_offline_cpu(int cpu)
{
- __rcu_offline_cpu(cpu, &rcu_state);
+ __rcu_offline_cpu(cpu, &rcu_sched_state);
__rcu_offline_cpu(cpu, &rcu_bh_state);
+ rcu_preempt_offline_cpu(cpu);
}
#else /* #ifdef CONFIG_HOTPLUG_CPU */
*/
void rcu_check_callbacks(int cpu, int user)
{
+ if (!rcu_pending(cpu))
+ return; /* if nothing for RCU to do. */
if (user ||
(idle_cpu(cpu) && rcu_scheduler_active &&
!in_softirq() && hardirq_count() <= (1 << HARDIRQ_SHIFT))) {
* Get here if this CPU took its interrupt from user
* mode or from the idle loop, and if this is not a
* nested interrupt. In this case, the CPU is in
- * a quiescent state, so count it.
+ * a quiescent state, so note it.
*
* No memory barrier is required here because both
- * rcu_qsctr_inc() and rcu_bh_qsctr_inc() reference
- * only CPU-local variables that other CPUs neither
- * access nor modify, at least not while the corresponding
- * CPU is online.
+ * rcu_sched_qs() and rcu_bh_qs() reference only CPU-local
+ * variables that other CPUs neither access nor modify,
+ * at least not while the corresponding CPU is online.
*/
- rcu_qsctr_inc(cpu);
- rcu_bh_qsctr_inc(cpu);
+ rcu_sched_qs(cpu);
+ rcu_bh_qs(cpu);
} else if (!in_softirq()) {
* Get here if this CPU did not take its interrupt from
* softirq, in other words, if it is not interrupting
* a rcu_bh read-side critical section. This is an _bh
- * critical section, so count it.
+ * critical section, so note it.
*/
- rcu_bh_qsctr_inc(cpu);
+ rcu_bh_qs(cpu);
}
+ rcu_preempt_check_callbacks(cpu);
raise_softirq(RCU_SOFTIRQ);
}
{
unsigned long flags;
+ WARN_ON_ONCE(rdp->beenonline == 0);
+
/*
* If an RCU GP has gone long enough, go check for dyntick
* idle CPUs and, if needed, send resched IPIs.
*/
smp_mb(); /* See above block comment. */
- __rcu_process_callbacks(&rcu_state, &__get_cpu_var(rcu_data));
+ __rcu_process_callbacks(&rcu_sched_state,
+ &__get_cpu_var(rcu_sched_data));
__rcu_process_callbacks(&rcu_bh_state, &__get_cpu_var(rcu_bh_data));
+ rcu_preempt_process_callbacks();
/*
* Memory references from any later RCU read-side critical sections
}
/*
- * Queue an RCU callback for invocation after a grace period.
+ * Queue an RCU-sched callback for invocation after a grace period.
*/
-void call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu))
+void call_rcu_sched(struct rcu_head *head, void (*func)(struct rcu_head *rcu))
{
- __call_rcu(head, func, &rcu_state);
+ __call_rcu(head, func, &rcu_sched_state);
}
-EXPORT_SYMBOL_GPL(call_rcu);
+EXPORT_SYMBOL_GPL(call_rcu_sched);
/*
* Queue an RCU for invocation after a quicker grace period.
* by the current CPU, returning 1 if so. This function is part of the
* RCU implementation; it is -not- an exported member of the RCU API.
*/
-int rcu_pending(int cpu)
+static int rcu_pending(int cpu)
{
- return __rcu_pending(&rcu_state, &per_cpu(rcu_data, cpu)) ||
- __rcu_pending(&rcu_bh_state, &per_cpu(rcu_bh_data, cpu));
+ return __rcu_pending(&rcu_sched_state, &per_cpu(rcu_sched_data, cpu)) ||
+ __rcu_pending(&rcu_bh_state, &per_cpu(rcu_bh_data, cpu)) ||
+ rcu_preempt_pending(cpu);
}
/*
int rcu_needs_cpu(int cpu)
{
/* RCU callbacks either ready or pending? */
- return per_cpu(rcu_data, cpu).nxtlist ||
- per_cpu(rcu_bh_data, cpu).nxtlist;
+ return per_cpu(rcu_sched_data, cpu).nxtlist ||
+ per_cpu(rcu_bh_data, cpu).nxtlist ||
+ rcu_preempt_needs_cpu(cpu);
}
/*
- * Initialize a CPU's per-CPU RCU data. We take this "scorched earth"
- * approach so that we don't have to worry about how long the CPU has
- * been gone, or whether it ever was online previously. We do trust the
- * ->mynode field, as it is constant for a given struct rcu_data and
- * initialized during early boot.
- *
- * Note that only one online or offline event can be happening at a given
- * time. Note also that we can accept some slop in the rsp->completed
- * access due to the fact that this CPU cannot possibly have any RCU
- * callbacks in flight yet.
+ * Do boot-time initialization of a CPU's per-CPU RCU data.
*/
-static void __cpuinit
-rcu_init_percpu_data(int cpu, struct rcu_state *rsp)
+static void __init
+rcu_boot_init_percpu_data(int cpu, struct rcu_state *rsp)
{
unsigned long flags;
int i;
+ struct rcu_data *rdp = rsp->rda[cpu];
+ struct rcu_node *rnp = rcu_get_root(rsp);
+
+ /* Set up local state, ensuring consistent view of global state. */
+ spin_lock_irqsave(&rnp->lock, flags);
+ rdp->grpmask = 1UL << (cpu - rdp->mynode->grplo);
+ rdp->nxtlist = NULL;
+ for (i = 0; i < RCU_NEXT_SIZE; i++)
+ rdp->nxttail[i] = &rdp->nxtlist;
+ rdp->qlen = 0;
+#ifdef CONFIG_NO_HZ
+ rdp->dynticks = &per_cpu(rcu_dynticks, cpu);
+#endif /* #ifdef CONFIG_NO_HZ */
+ rdp->cpu = cpu;
+ spin_unlock_irqrestore(&rnp->lock, flags);
+}
+
+/*
+ * Initialize a CPU's per-CPU RCU data. Note that only one online or
+ * offline event can be happening at a given time. Note also that we
+ * can accept some slop in the rsp->completed access due to the fact
+ * that this CPU cannot possibly have any RCU callbacks in flight yet.
+ */
+static void __cpuinit
+rcu_init_percpu_data(int cpu, struct rcu_state *rsp, int preemptable)
+{
+ unsigned long flags;
long lastcomp;
unsigned long mask;
struct rcu_data *rdp = rsp->rda[cpu];
rdp->passed_quiesc = 0; /* We could be racing with new GP, */
rdp->qs_pending = 1; /* so set up to respond to current GP. */
rdp->beenonline = 1; /* We have now been online. */
+ rdp->preemptable = preemptable;
rdp->passed_quiesc_completed = lastcomp - 1;
- rdp->grpmask = 1UL << (cpu - rdp->mynode->grplo);
- rdp->nxtlist = NULL;
- for (i = 0; i < RCU_NEXT_SIZE; i++)
- rdp->nxttail[i] = &rdp->nxtlist;
- rdp->qlen = 0;
rdp->blimit = blimit;
-#ifdef CONFIG_NO_HZ
- rdp->dynticks = &per_cpu(rcu_dynticks, cpu);
-#endif /* #ifdef CONFIG_NO_HZ */
- rdp->cpu = cpu;
spin_unlock(&rnp->lock); /* irqs remain disabled. */
/*
static void __cpuinit rcu_online_cpu(int cpu)
{
- rcu_init_percpu_data(cpu, &rcu_state);
- rcu_init_percpu_data(cpu, &rcu_bh_state);
- open_softirq(RCU_SOFTIRQ, rcu_process_callbacks);
+ rcu_init_percpu_data(cpu, &rcu_sched_state, 0);
+ rcu_init_percpu_data(cpu, &rcu_bh_state, 0);
+ rcu_preempt_init_percpu_data(cpu);
}
/*
- * Handle CPU online/offline notifcation events.
+ * Handle CPU online/offline notification events.
*/
-static int __cpuinit rcu_cpu_notify(struct notifier_block *self,
- unsigned long action, void *hcpu)
+int __cpuinit rcu_cpu_notify(struct notifier_block *self,
+ unsigned long action, void *hcpu)
{
long cpu = (long)hcpu;
rnp = rsp->level[i];
for (j = 0; j < rsp->levelcnt[i]; j++, rnp++) {
spin_lock_init(&rnp->lock);
+ rnp->gpnum = 0;
rnp->qsmask = 0;
rnp->qsmaskinit = 0;
rnp->grplo = j * cpustride;
j / rsp->levelspread[i - 1];
}
rnp->level = i;
+ INIT_LIST_HEAD(&rnp->blocked_tasks[0]);
+ INIT_LIST_HEAD(&rnp->blocked_tasks[1]);
}
}
}
/*
- * Helper macro for __rcu_init(). To be used nowhere else!
- * Assigns leaf node pointers into each CPU's rcu_data structure.
+ * Helper macro for __rcu_init() and __rcu_init_preempt(). To be used
+ * nowhere else! Assigns leaf node pointers into each CPU's rcu_data
+ * structure.
*/
-#define RCU_DATA_PTR_INIT(rsp, rcu_data) \
+#define RCU_INIT_FLAVOR(rsp, rcu_data) \
do { \
+ rcu_init_one(rsp); \
rnp = (rsp)->level[NUM_RCU_LVLS - 1]; \
j = 0; \
for_each_possible_cpu(i) { \
j++; \
per_cpu(rcu_data, i).mynode = &rnp[j]; \
(rsp)->rda[i] = &per_cpu(rcu_data, i); \
+ rcu_boot_init_percpu_data(i, rsp); \
} \
} while (0)
-static struct notifier_block __cpuinitdata rcu_nb = {
- .notifier_call = rcu_cpu_notify,
-};
+#ifdef CONFIG_TREE_PREEMPT_RCU
+
+void __init __rcu_init_preempt(void)
+{
+ int i; /* All used by RCU_INIT_FLAVOR(). */
+ int j;
+ struct rcu_node *rnp;
+
+ RCU_INIT_FLAVOR(&rcu_preempt_state, rcu_preempt_data);
+}
+
+#else /* #ifdef CONFIG_TREE_PREEMPT_RCU */
+
+void __init __rcu_init_preempt(void)
+{
+}
+
+#endif /* #else #ifdef CONFIG_TREE_PREEMPT_RCU */
void __init __rcu_init(void)
{
- int i; /* All used by RCU_DATA_PTR_INIT(). */
+ int i; /* All used by RCU_INIT_FLAVOR(). */
int j;
struct rcu_node *rnp;
- printk(KERN_INFO "Hierarchical RCU implementation.\n");
+ rcu_bootup_announce();
#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
printk(KERN_INFO "RCU-based detection of stalled CPUs is enabled.\n");
#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
- rcu_init_one(&rcu_state);
- RCU_DATA_PTR_INIT(&rcu_state, rcu_data);
- rcu_init_one(&rcu_bh_state);
- RCU_DATA_PTR_INIT(&rcu_bh_state, rcu_bh_data);
-
- for_each_online_cpu(i)
- rcu_cpu_notify(&rcu_nb, CPU_UP_PREPARE, (void *)(long)i);
- /* Register notifier for non-boot CPUs */
- register_cpu_notifier(&rcu_nb);
+ RCU_INIT_FLAVOR(&rcu_sched_state, rcu_sched_data);
+ RCU_INIT_FLAVOR(&rcu_bh_state, rcu_bh_data);
+ __rcu_init_preempt();
+ open_softirq(RCU_SOFTIRQ, rcu_process_callbacks);
}
module_param(blimit, int, 0);
+/*
+ * Read-Copy Update mechanism for mutual exclusion (tree-based version)
+ * Internal non-public definitions.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright IBM Corporation, 2008
+ *
+ * Author: Ingo Molnar <mingo@elte.hu>
+ * Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+ */
+
+#include <linux/cache.h>
+#include <linux/spinlock.h>
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/seqlock.h>
+
+/*
+ * Define shape of hierarchy based on NR_CPUS and CONFIG_RCU_FANOUT.
+ * In theory, it should be possible to add more levels straightforwardly.
+ * In practice, this has not been tested, so there is probably some
+ * bug somewhere.
+ */
+#define MAX_RCU_LVLS 3
+#define RCU_FANOUT (CONFIG_RCU_FANOUT)
+#define RCU_FANOUT_SQ (RCU_FANOUT * RCU_FANOUT)
+#define RCU_FANOUT_CUBE (RCU_FANOUT_SQ * RCU_FANOUT)
+
+#if NR_CPUS <= RCU_FANOUT
+# define NUM_RCU_LVLS 1
+# define NUM_RCU_LVL_0 1
+# define NUM_RCU_LVL_1 (NR_CPUS)
+# define NUM_RCU_LVL_2 0
+# define NUM_RCU_LVL_3 0
+#elif NR_CPUS <= RCU_FANOUT_SQ
+# define NUM_RCU_LVLS 2
+# define NUM_RCU_LVL_0 1
+# define NUM_RCU_LVL_1 (((NR_CPUS) + RCU_FANOUT - 1) / RCU_FANOUT)
+# define NUM_RCU_LVL_2 (NR_CPUS)
+# define NUM_RCU_LVL_3 0
+#elif NR_CPUS <= RCU_FANOUT_CUBE
+# define NUM_RCU_LVLS 3
+# define NUM_RCU_LVL_0 1
+# define NUM_RCU_LVL_1 (((NR_CPUS) + RCU_FANOUT_SQ - 1) / RCU_FANOUT_SQ)
+# define NUM_RCU_LVL_2 (((NR_CPUS) + (RCU_FANOUT) - 1) / (RCU_FANOUT))
+# define NUM_RCU_LVL_3 NR_CPUS
+#else
+# error "CONFIG_RCU_FANOUT insufficient for NR_CPUS"
+#endif /* #if (NR_CPUS) <= RCU_FANOUT */
+
+#define RCU_SUM (NUM_RCU_LVL_0 + NUM_RCU_LVL_1 + NUM_RCU_LVL_2 + NUM_RCU_LVL_3)
+#define NUM_RCU_NODES (RCU_SUM - NR_CPUS)
+
+/*
+ * Dynticks per-CPU state.
+ */
+struct rcu_dynticks {
+ int dynticks_nesting; /* Track nesting level, sort of. */
+ int dynticks; /* Even value for dynticks-idle, else odd. */
+ int dynticks_nmi; /* Even value for either dynticks-idle or */
+ /* not in nmi handler, else odd. So this */
+ /* remains even for nmi from irq handler. */
+};
+
+/*
+ * Definition for node within the RCU grace-period-detection hierarchy.
+ */
+struct rcu_node {
+ spinlock_t lock;
+ long gpnum; /* Current grace period for this node. */
+ /* This will either be equal to or one */
+ /* behind the root rcu_node's gpnum. */
+ unsigned long qsmask; /* CPUs or groups that need to switch in */
+ /* order for current grace period to proceed.*/
+ unsigned long qsmaskinit;
+ /* Per-GP initialization for qsmask. */
+ unsigned long grpmask; /* Mask to apply to parent qsmask. */
+ int grplo; /* lowest-numbered CPU or group here. */
+ int grphi; /* highest-numbered CPU or group here. */
+ u8 grpnum; /* CPU/group number for next level up. */
+ u8 level; /* root is at level 0. */
+ struct rcu_node *parent;
+ struct list_head blocked_tasks[2];
+ /* Tasks blocked in RCU read-side critsect. */
+} ____cacheline_internodealigned_in_smp;
+
+/* Index values for nxttail array in struct rcu_data. */
+#define RCU_DONE_TAIL 0 /* Also RCU_WAIT head. */
+#define RCU_WAIT_TAIL 1 /* Also RCU_NEXT_READY head. */
+#define RCU_NEXT_READY_TAIL 2 /* Also RCU_NEXT head. */
+#define RCU_NEXT_TAIL 3
+#define RCU_NEXT_SIZE 4
+
+/* Per-CPU data for read-copy update. */
+struct rcu_data {
+ /* 1) quiescent-state and grace-period handling : */
+ long completed; /* Track rsp->completed gp number */
+ /* in order to detect GP end. */
+ long gpnum; /* Highest gp number that this CPU */
+ /* is aware of having started. */
+ long passed_quiesc_completed;
+ /* Value of completed at time of qs. */
+ bool passed_quiesc; /* User-mode/idle loop etc. */
+ bool qs_pending; /* Core waits for quiesc state. */
+ bool beenonline; /* CPU online at least once. */
+ bool preemptable; /* Preemptable RCU? */
+ struct rcu_node *mynode; /* This CPU's leaf of hierarchy */
+ unsigned long grpmask; /* Mask to apply to leaf qsmask. */
+
+ /* 2) batch handling */
+ /*
+ * If nxtlist is not NULL, it is partitioned as follows.
+ * Any of the partitions might be empty, in which case the
+ * pointer to that partition will be equal to the pointer for
+ * the following partition. When the list is empty, all of
+ * the nxttail elements point to nxtlist, which is NULL.
+ *
+ * [*nxttail[RCU_NEXT_READY_TAIL], NULL = *nxttail[RCU_NEXT_TAIL]):
+ * Entries that might have arrived after current GP ended
+ * [*nxttail[RCU_WAIT_TAIL], *nxttail[RCU_NEXT_READY_TAIL]):
+ * Entries known to have arrived before current GP ended
+ * [*nxttail[RCU_DONE_TAIL], *nxttail[RCU_WAIT_TAIL]):
+ * Entries that batch # <= ->completed - 1: waiting for current GP
+ * [nxtlist, *nxttail[RCU_DONE_TAIL]):
+ * Entries that batch # <= ->completed
+ * The grace period for these entries has completed, and
+ * the other grace-period-completed entries may be moved
+ * here temporarily in rcu_process_callbacks().
+ */
+ struct rcu_head *nxtlist;
+ struct rcu_head **nxttail[RCU_NEXT_SIZE];
+ long qlen; /* # of queued callbacks */
+ long blimit; /* Upper limit on a processed batch */
+
+#ifdef CONFIG_NO_HZ
+ /* 3) dynticks interface. */
+ struct rcu_dynticks *dynticks; /* Shared per-CPU dynticks state. */
+ int dynticks_snap; /* Per-GP tracking for dynticks. */
+ int dynticks_nmi_snap; /* Per-GP tracking for dynticks_nmi. */
+#endif /* #ifdef CONFIG_NO_HZ */
+
+ /* 4) reasons this CPU needed to be kicked by force_quiescent_state */
+#ifdef CONFIG_NO_HZ
+ unsigned long dynticks_fqs; /* Kicked due to dynticks idle. */
+#endif /* #ifdef CONFIG_NO_HZ */
+ unsigned long offline_fqs; /* Kicked due to being offline. */
+ unsigned long resched_ipi; /* Sent a resched IPI. */
+
+ /* 5) __rcu_pending() statistics. */
+ long n_rcu_pending; /* rcu_pending() calls since boot. */
+ long n_rp_qs_pending;
+ long n_rp_cb_ready;
+ long n_rp_cpu_needs_gp;
+ long n_rp_gp_completed;
+ long n_rp_gp_started;
+ long n_rp_need_fqs;
+ long n_rp_need_nothing;
+
+ int cpu;
+};
+
+/* Values for signaled field in struct rcu_state. */
+#define RCU_GP_INIT 0 /* Grace period being initialized. */
+#define RCU_SAVE_DYNTICK 1 /* Need to scan dyntick state. */
+#define RCU_FORCE_QS 2 /* Need to force quiescent state. */
+#ifdef CONFIG_NO_HZ
+#define RCU_SIGNAL_INIT RCU_SAVE_DYNTICK
+#else /* #ifdef CONFIG_NO_HZ */
+#define RCU_SIGNAL_INIT RCU_FORCE_QS
+#endif /* #else #ifdef CONFIG_NO_HZ */
+
+#define RCU_JIFFIES_TILL_FORCE_QS 3 /* for rsp->jiffies_force_qs */
+#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
+#define RCU_SECONDS_TILL_STALL_CHECK (10 * HZ) /* for rsp->jiffies_stall */
+#define RCU_SECONDS_TILL_STALL_RECHECK (30 * HZ) /* for rsp->jiffies_stall */
+#define RCU_STALL_RAT_DELAY 2 /* Allow other CPUs time */
+ /* to take at least one */
+ /* scheduling clock irq */
+ /* before ratting on them. */
+
+#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
+
+/*
+ * RCU global state, including node hierarchy. This hierarchy is
+ * represented in "heap" form in a dense array. The root (first level)
+ * of the hierarchy is in ->node[0] (referenced by ->level[0]), the second
+ * level in ->node[1] through ->node[m] (->node[1] referenced by ->level[1]),
+ * and the third level in ->node[m+1] and following (->node[m+1] referenced
+ * by ->level[2]). The number of levels is determined by the number of
+ * CPUs and by CONFIG_RCU_FANOUT. Small systems will have a "hierarchy"
+ * consisting of a single rcu_node.
+ */
+struct rcu_state {
+ struct rcu_node node[NUM_RCU_NODES]; /* Hierarchy. */
+ struct rcu_node *level[NUM_RCU_LVLS]; /* Hierarchy levels. */
+ u32 levelcnt[MAX_RCU_LVLS + 1]; /* # nodes in each level. */
+ u8 levelspread[NUM_RCU_LVLS]; /* kids/node in each level. */
+ struct rcu_data *rda[NR_CPUS]; /* array of rdp pointers. */
+
+ /* The following fields are guarded by the root rcu_node's lock. */
+
+ u8 signaled ____cacheline_internodealigned_in_smp;
+ /* Force QS state. */
+ long gpnum; /* Current gp number. */
+ long completed; /* # of last completed gp. */
+ spinlock_t onofflock; /* exclude on/offline and */
+ /* starting new GP. */
+ spinlock_t fqslock; /* Only one task forcing */
+ /* quiescent states. */
+ unsigned long jiffies_force_qs; /* Time at which to invoke */
+ /* force_quiescent_state(). */
+ unsigned long n_force_qs; /* Number of calls to */
+ /* force_quiescent_state(). */
+ unsigned long n_force_qs_lh; /* ~Number of calls leaving */
+ /* due to lock unavailable. */
+ unsigned long n_force_qs_ngp; /* Number of calls leaving */
+ /* due to no GP active. */
+#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
+ unsigned long gp_start; /* Time at which GP started, */
+ /* but in jiffies. */
+ unsigned long jiffies_stall; /* Time at which to check */
+ /* for CPU stalls. */
+#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
+#ifdef CONFIG_NO_HZ
+ long dynticks_completed; /* Value of completed @ snap. */
+#endif /* #ifdef CONFIG_NO_HZ */
+};
+
+#ifdef RCU_TREE_NONCORE
/*
* RCU implementation internal declarations:
*/
-extern struct rcu_state rcu_state;
-DECLARE_PER_CPU(struct rcu_data, rcu_data);
+extern struct rcu_state rcu_sched_state;
+DECLARE_PER_CPU(struct rcu_data, rcu_sched_data);
extern struct rcu_state rcu_bh_state;
DECLARE_PER_CPU(struct rcu_data, rcu_bh_data);
+#ifdef CONFIG_TREE_PREEMPT_RCU
+extern struct rcu_state rcu_preempt_state;
+DECLARE_PER_CPU(struct rcu_data, rcu_preempt_data);
+#endif /* #ifdef CONFIG_TREE_PREEMPT_RCU */
+
+#endif /* #ifdef RCU_TREE_NONCORE */
+
--- /dev/null
+/*
+ * Read-Copy Update mechanism for mutual exclusion (tree-based version)
+ * Internal non-public definitions that provide either classic
+ * or preemptable semantics.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright Red Hat, 2009
+ * Copyright IBM Corporation, 2009
+ *
+ * Author: Ingo Molnar <mingo@elte.hu>
+ * Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+ */
+
+
+#ifdef CONFIG_TREE_PREEMPT_RCU
+
+struct rcu_state rcu_preempt_state = RCU_STATE_INITIALIZER(rcu_preempt_state);
+DEFINE_PER_CPU(struct rcu_data, rcu_preempt_data);
+
+/*
+ * Tell them what RCU they are running.
+ */
+static inline void rcu_bootup_announce(void)
+{
+ printk(KERN_INFO
+ "Experimental preemptable hierarchical RCU implementation.\n");
+}
+
+/*
+ * Return the number of RCU-preempt batches processed thus far
+ * for debug and statistics.
+ */
+long rcu_batches_completed_preempt(void)
+{
+ return rcu_preempt_state.completed;
+}
+EXPORT_SYMBOL_GPL(rcu_batches_completed_preempt);
+
+/*
+ * Return the number of RCU batches processed thus far for debug & stats.
+ */
+long rcu_batches_completed(void)
+{
+ return rcu_batches_completed_preempt();
+}
+EXPORT_SYMBOL_GPL(rcu_batches_completed);
+
+/*
+ * Record a preemptable-RCU quiescent state for the specified CPU. Note
+ * that this just means that the task currently running on the CPU is
+ * not in a quiescent state. There might be any number of tasks blocked
+ * while in an RCU read-side critical section.
+ */
+static void rcu_preempt_qs_record(int cpu)
+{
+ struct rcu_data *rdp = &per_cpu(rcu_preempt_data, cpu);
+ rdp->passed_quiesc = 1;
+ rdp->passed_quiesc_completed = rdp->completed;
+}
+
+/*
+ * We have entered the scheduler or are between softirqs in ksoftirqd.
+ * If we are in an RCU read-side critical section, we need to reflect
+ * that in the state of the rcu_node structure corresponding to this CPU.
+ * Caller must disable hardirqs.
+ */
+static void rcu_preempt_qs(int cpu)
+{
+ struct task_struct *t = current;
+ int phase;
+ struct rcu_data *rdp;
+ struct rcu_node *rnp;
+
+ if (t->rcu_read_lock_nesting &&
+ (t->rcu_read_unlock_special & RCU_READ_UNLOCK_BLOCKED) == 0) {
+
+ /* Possibly blocking in an RCU read-side critical section. */
+ rdp = rcu_preempt_state.rda[cpu];
+ rnp = rdp->mynode;
+ spin_lock(&rnp->lock);
+ t->rcu_read_unlock_special |= RCU_READ_UNLOCK_BLOCKED;
+ t->rcu_blocked_node = rnp;
+
+ /*
+ * If this CPU has already checked in, then this task
+ * will hold up the next grace period rather than the
+ * current grace period. Queue the task accordingly.
+ * If the task is queued for the current grace period
+ * (i.e., this CPU has not yet passed through a quiescent
+ * state for the current grace period), then as long
+ * as that task remains queued, the current grace period
+ * cannot end.
+ */
+ phase = !(rnp->qsmask & rdp->grpmask) ^ (rnp->gpnum & 0x1);
+ list_add(&t->rcu_node_entry, &rnp->blocked_tasks[phase]);
+ smp_mb(); /* Ensure later ctxt swtch seen after above. */
+ spin_unlock(&rnp->lock);
+ }
+
+ /*
+ * Either we were not in an RCU read-side critical section to
+ * begin with, or we have now recorded that critical section
+ * globally. Either way, we can now note a quiescent state
+ * for this CPU. Again, if we were in an RCU read-side critical
+ * section, and if that critical section was blocking the current
+ * grace period, then the fact that the task has been enqueued
+ * means that we continue to block the current grace period.
+ */
+ rcu_preempt_qs_record(cpu);
+ t->rcu_read_unlock_special &= ~(RCU_READ_UNLOCK_NEED_QS |
+ RCU_READ_UNLOCK_GOT_QS);
+}
+
+/*
+ * Tree-preemptable RCU implementation for rcu_read_lock().
+ * Just increment ->rcu_read_lock_nesting, shared state will be updated
+ * if we block.
+ */
+void __rcu_read_lock(void)
+{
+ ACCESS_ONCE(current->rcu_read_lock_nesting)++;
+ barrier(); /* needed if we ever invoke rcu_read_lock in rcutree.c */
+}
+EXPORT_SYMBOL_GPL(__rcu_read_lock);
+
+static void rcu_read_unlock_special(struct task_struct *t)
+{
+ int empty;
+ unsigned long flags;
+ unsigned long mask;
+ struct rcu_node *rnp;
+ int special;
+
+ /* NMI handlers cannot block and cannot safely manipulate state. */
+ if (in_nmi())
+ return;
+
+ local_irq_save(flags);
+
+ /*
+ * If RCU core is waiting for this CPU to exit critical section,
+ * let it know that we have done so.
+ */
+ special = t->rcu_read_unlock_special;
+ if (special & RCU_READ_UNLOCK_NEED_QS) {
+ t->rcu_read_unlock_special &= ~RCU_READ_UNLOCK_NEED_QS;
+ t->rcu_read_unlock_special |= RCU_READ_UNLOCK_GOT_QS;
+ }
+
+ /* Hardware IRQ handlers cannot block. */
+ if (in_irq()) {
+ local_irq_restore(flags);
+ return;
+ }
+
+ /* Clean up if blocked during RCU read-side critical section. */
+ if (special & RCU_READ_UNLOCK_BLOCKED) {
+ t->rcu_read_unlock_special &= ~RCU_READ_UNLOCK_BLOCKED;
+
+ /*
+ * Remove this task from the list it blocked on. The
+ * task can migrate while we acquire the lock, but at
+ * most one time. So at most two passes through loop.
+ */
+ for (;;) {
+ rnp = t->rcu_blocked_node;
+ spin_lock(&rnp->lock);
+ if (rnp == t->rcu_blocked_node)
+ break;
+ spin_unlock(&rnp->lock);
+ }
+ empty = list_empty(&rnp->blocked_tasks[rnp->gpnum & 0x1]);
+ list_del_init(&t->rcu_node_entry);
+ t->rcu_blocked_node = NULL;
+
+ /*
+ * If this was the last task on the current list, and if
+ * we aren't waiting on any CPUs, report the quiescent state.
+ * Note that both cpu_quiet_msk_finish() and cpu_quiet_msk()
+ * drop rnp->lock and restore irq.
+ */
+ if (!empty && rnp->qsmask == 0 &&
+ list_empty(&rnp->blocked_tasks[rnp->gpnum & 0x1])) {
+ t->rcu_read_unlock_special &=
+ ~(RCU_READ_UNLOCK_NEED_QS |
+ RCU_READ_UNLOCK_GOT_QS);
+ if (rnp->parent == NULL) {
+ /* Only one rcu_node in the tree. */
+ cpu_quiet_msk_finish(&rcu_preempt_state, flags);
+ return;
+ }
+ /* Report up the rest of the hierarchy. */
+ mask = rnp->grpmask;
+ spin_unlock_irqrestore(&rnp->lock, flags);
+ rnp = rnp->parent;
+ spin_lock_irqsave(&rnp->lock, flags);
+ cpu_quiet_msk(mask, &rcu_preempt_state, rnp, flags);
+ return;
+ }
+ spin_unlock(&rnp->lock);
+ }
+ local_irq_restore(flags);
+}
+
+/*
+ * Tree-preemptable RCU implementation for rcu_read_unlock().
+ * Decrement ->rcu_read_lock_nesting. If the result is zero (outermost
+ * rcu_read_unlock()) and ->rcu_read_unlock_special is non-zero, then
+ * invoke rcu_read_unlock_special() to clean up after a context switch
+ * in an RCU read-side critical section and other special cases.
+ */
+void __rcu_read_unlock(void)
+{
+ struct task_struct *t = current;
+
+ barrier(); /* needed if we ever invoke rcu_read_unlock in rcutree.c */
+ if (--ACCESS_ONCE(t->rcu_read_lock_nesting) == 0 &&
+ unlikely(ACCESS_ONCE(t->rcu_read_unlock_special)))
+ rcu_read_unlock_special(t);
+}
+EXPORT_SYMBOL_GPL(__rcu_read_unlock);
+
+#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
+
+/*
+ * Scan the current list of tasks blocked within RCU read-side critical
+ * sections, printing out the tid of each.
+ */
+static void rcu_print_task_stall(struct rcu_node *rnp)
+{
+ unsigned long flags;
+ struct list_head *lp;
+ int phase = rnp->gpnum & 0x1;
+ struct task_struct *t;
+
+ if (!list_empty(&rnp->blocked_tasks[phase])) {
+ spin_lock_irqsave(&rnp->lock, flags);
+ phase = rnp->gpnum & 0x1; /* re-read under lock. */
+ lp = &rnp->blocked_tasks[phase];
+ list_for_each_entry(t, lp, rcu_node_entry)
+ printk(" P%d", t->pid);
+ spin_unlock_irqrestore(&rnp->lock, flags);
+ }
+}
+
+#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
+
+/*
+ * Check for preempted RCU readers for the specified rcu_node structure.
+ * If the caller needs a reliable answer, it must hold the rcu_node's
+ * >lock.
+ */
+static int rcu_preempted_readers(struct rcu_node *rnp)
+{
+ return !list_empty(&rnp->blocked_tasks[rnp->gpnum & 0x1]);
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+
+/*
+ * Handle tasklist migration for case in which all CPUs covered by the
+ * specified rcu_node have gone offline. Move them up to the root
+ * rcu_node. The reason for not just moving them to the immediate
+ * parent is to remove the need for rcu_read_unlock_special() to
+ * make more than two attempts to acquire the target rcu_node's lock.
+ *
+ * The caller must hold rnp->lock with irqs disabled.
+ */
+static void rcu_preempt_offline_tasks(struct rcu_state *rsp,
+ struct rcu_node *rnp)
+{
+ int i;
+ struct list_head *lp;
+ struct list_head *lp_root;
+ struct rcu_node *rnp_root = rcu_get_root(rsp);
+ struct task_struct *tp;
+
+ if (rnp == rnp_root) {
+ WARN_ONCE(1, "Last CPU thought to be offlined?");
+ return; /* Shouldn't happen: at least one CPU online. */
+ }
+
+ /*
+ * Move tasks up to root rcu_node. Rely on the fact that the
+ * root rcu_node can be at most one ahead of the rest of the
+ * rcu_nodes in terms of gp_num value. This fact allows us to
+ * move the blocked_tasks[] array directly, element by element.
+ */
+ for (i = 0; i < 2; i++) {
+ lp = &rnp->blocked_tasks[i];
+ lp_root = &rnp_root->blocked_tasks[i];
+ while (!list_empty(lp)) {
+ tp = list_entry(lp->next, typeof(*tp), rcu_node_entry);
+ spin_lock(&rnp_root->lock); /* irqs already disabled */
+ list_del(&tp->rcu_node_entry);
+ tp->rcu_blocked_node = rnp_root;
+ list_add(&tp->rcu_node_entry, lp_root);
+ spin_unlock(&rnp_root->lock); /* irqs remain disabled */
+ }
+ }
+}
+
+/*
+ * Do CPU-offline processing for preemptable RCU.
+ */
+static void rcu_preempt_offline_cpu(int cpu)
+{
+ __rcu_offline_cpu(cpu, &rcu_preempt_state);
+}
+
+#endif /* #ifdef CONFIG_HOTPLUG_CPU */
+
+/*
+ * Check for a quiescent state from the current CPU. When a task blocks,
+ * the task is recorded in the corresponding CPU's rcu_node structure,
+ * which is checked elsewhere.
+ *
+ * Caller must disable hard irqs.
+ */
+static void rcu_preempt_check_callbacks(int cpu)
+{
+ struct task_struct *t = current;
+
+ if (t->rcu_read_lock_nesting == 0) {
+ t->rcu_read_unlock_special &=
+ ~(RCU_READ_UNLOCK_NEED_QS | RCU_READ_UNLOCK_GOT_QS);
+ rcu_preempt_qs_record(cpu);
+ return;
+ }
+ if (per_cpu(rcu_preempt_data, cpu).qs_pending) {
+ if (t->rcu_read_unlock_special & RCU_READ_UNLOCK_GOT_QS) {
+ rcu_preempt_qs_record(cpu);
+ t->rcu_read_unlock_special &= ~RCU_READ_UNLOCK_GOT_QS;
+ } else if (!(t->rcu_read_unlock_special &
+ RCU_READ_UNLOCK_NEED_QS)) {
+ t->rcu_read_unlock_special |= RCU_READ_UNLOCK_NEED_QS;
+ }
+ }
+}
+
+/*
+ * Process callbacks for preemptable RCU.
+ */
+static void rcu_preempt_process_callbacks(void)
+{
+ __rcu_process_callbacks(&rcu_preempt_state,
+ &__get_cpu_var(rcu_preempt_data));
+}
+
+/*
+ * Queue a preemptable-RCU callback for invocation after a grace period.
+ */
+void call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu))
+{
+ __call_rcu(head, func, &rcu_preempt_state);
+}
+EXPORT_SYMBOL_GPL(call_rcu);
+
+/*
+ * Check to see if there is any immediate preemptable-RCU-related work
+ * to be done.
+ */
+static int rcu_preempt_pending(int cpu)
+{
+ return __rcu_pending(&rcu_preempt_state,
+ &per_cpu(rcu_preempt_data, cpu));
+}
+
+/*
+ * Does preemptable RCU need the CPU to stay out of dynticks mode?
+ */
+static int rcu_preempt_needs_cpu(int cpu)
+{
+ return !!per_cpu(rcu_preempt_data, cpu).nxtlist;
+}
+
+/*
+ * Initialize preemptable RCU's per-CPU data.
+ */
+static void __cpuinit rcu_preempt_init_percpu_data(int cpu)
+{
+ rcu_init_percpu_data(cpu, &rcu_preempt_state, 1);
+}
+
+/*
+ * Check for a task exiting while in a preemptable-RCU read-side
+ * critical section, clean up if so. No need to issue warnings,
+ * as debug_check_no_locks_held() already does this if lockdep
+ * is enabled.
+ */
+void exit_rcu(void)
+{
+ struct task_struct *t = current;
+
+ if (t->rcu_read_lock_nesting == 0)
+ return;
+ t->rcu_read_lock_nesting = 1;
+ rcu_read_unlock();
+}
+
+#else /* #ifdef CONFIG_TREE_PREEMPT_RCU */
+
+/*
+ * Tell them what RCU they are running.
+ */
+static inline void rcu_bootup_announce(void)
+{
+ printk(KERN_INFO "Hierarchical RCU implementation.\n");
+}
+
+/*
+ * Return the number of RCU batches processed thus far for debug & stats.
+ */
+long rcu_batches_completed(void)
+{
+ return rcu_batches_completed_sched();
+}
+EXPORT_SYMBOL_GPL(rcu_batches_completed);
+
+/*
+ * Because preemptable RCU does not exist, we never have to check for
+ * CPUs being in quiescent states.
+ */
+static void rcu_preempt_qs(int cpu)
+{
+}
+
+#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
+
+/*
+ * Because preemptable RCU does not exist, we never have to check for
+ * tasks blocked within RCU read-side critical sections.
+ */
+static void rcu_print_task_stall(struct rcu_node *rnp)
+{
+}
+
+#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
+
+/*
+ * Because preemptable RCU does not exist, there are never any preempted
+ * RCU readers.
+ */
+static int rcu_preempted_readers(struct rcu_node *rnp)
+{
+ return 0;
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+
+/*
+ * Because preemptable RCU does not exist, it never needs to migrate
+ * tasks that were blocked within RCU read-side critical sections.
+ */
+static void rcu_preempt_offline_tasks(struct rcu_state *rsp,
+ struct rcu_node *rnp)
+{
+}
+
+/*
+ * Because preemptable RCU does not exist, it never needs CPU-offline
+ * processing.
+ */
+static void rcu_preempt_offline_cpu(int cpu)
+{
+}
+
+#endif /* #ifdef CONFIG_HOTPLUG_CPU */
+
+/*
+ * Because preemptable RCU does not exist, it never has any callbacks
+ * to check.
+ */
+void rcu_preempt_check_callbacks(int cpu)
+{
+}
+
+/*
+ * Because preemptable RCU does not exist, it never has any callbacks
+ * to process.
+ */
+void rcu_preempt_process_callbacks(void)
+{
+}
+
+/*
+ * In classic RCU, call_rcu() is just call_rcu_sched().
+ */
+void call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu))
+{
+ call_rcu_sched(head, func);
+}
+EXPORT_SYMBOL_GPL(call_rcu);
+
+/*
+ * Because preemptable RCU does not exist, it never has any work to do.
+ */
+static int rcu_preempt_pending(int cpu)
+{
+ return 0;
+}
+
+/*
+ * Because preemptable RCU does not exist, it never needs any CPU.
+ */
+static int rcu_preempt_needs_cpu(int cpu)
+{
+ return 0;
+}
+
+/*
+ * Because preemptable RCU does not exist, there is no per-CPU
+ * data to initialize.
+ */
+static void __cpuinit rcu_preempt_init_percpu_data(int cpu)
+{
+}
+
+#endif /* #else #ifdef CONFIG_TREE_PREEMPT_RCU */
#include <linux/debugfs.h>
#include <linux/seq_file.h>
+#define RCU_TREE_NONCORE
#include "rcutree.h"
static void print_one_rcu_data(struct seq_file *m, struct rcu_data *rdp)
static int show_rcudata(struct seq_file *m, void *unused)
{
- seq_puts(m, "rcu:\n");
- PRINT_RCU_DATA(rcu_data, print_one_rcu_data, m);
+#ifdef CONFIG_TREE_PREEMPT_RCU
+ seq_puts(m, "rcu_preempt:\n");
+ PRINT_RCU_DATA(rcu_preempt_data, print_one_rcu_data, m);
+#endif /* #ifdef CONFIG_TREE_PREEMPT_RCU */
+ seq_puts(m, "rcu_sched:\n");
+ PRINT_RCU_DATA(rcu_sched_data, print_one_rcu_data, m);
seq_puts(m, "rcu_bh:\n");
PRINT_RCU_DATA(rcu_bh_data, print_one_rcu_data, m);
return 0;
return;
seq_printf(m, "%d,%s,%ld,%ld,%d,%ld,%d",
rdp->cpu,
- cpu_is_offline(rdp->cpu) ? "\"Y\"" : "\"N\"",
+ cpu_is_offline(rdp->cpu) ? "\"N\"" : "\"Y\"",
rdp->completed, rdp->gpnum,
rdp->passed_quiesc, rdp->passed_quiesc_completed,
rdp->qs_pending);
seq_puts(m, "\"dt\",\"dt nesting\",\"dn\",\"df\",");
#endif /* #ifdef CONFIG_NO_HZ */
seq_puts(m, "\"of\",\"ri\",\"ql\",\"b\"\n");
- seq_puts(m, "\"rcu:\"\n");
- PRINT_RCU_DATA(rcu_data, print_one_rcu_data_csv, m);
+#ifdef CONFIG_TREE_PREEMPT_RCU
+ seq_puts(m, "\"rcu_preempt:\"\n");
+ PRINT_RCU_DATA(rcu_preempt_data, print_one_rcu_data_csv, m);
+#endif /* #ifdef CONFIG_TREE_PREEMPT_RCU */
+ seq_puts(m, "\"rcu_sched:\"\n");
+ PRINT_RCU_DATA(rcu_sched_data, print_one_rcu_data_csv, m);
seq_puts(m, "\"rcu_bh:\"\n");
PRINT_RCU_DATA(rcu_bh_data, print_one_rcu_data_csv, m);
return 0;
static int show_rcuhier(struct seq_file *m, void *unused)
{
- seq_puts(m, "rcu:\n");
- print_one_rcu_state(m, &rcu_state);
+#ifdef CONFIG_TREE_PREEMPT_RCU
+ seq_puts(m, "rcu_preempt:\n");
+ print_one_rcu_state(m, &rcu_preempt_state);
+#endif /* #ifdef CONFIG_TREE_PREEMPT_RCU */
+ seq_puts(m, "rcu_sched:\n");
+ print_one_rcu_state(m, &rcu_sched_state);
seq_puts(m, "rcu_bh:\n");
print_one_rcu_state(m, &rcu_bh_state);
return 0;
static int show_rcugp(struct seq_file *m, void *unused)
{
- seq_printf(m, "rcu: completed=%ld gpnum=%ld\n",
- rcu_state.completed, rcu_state.gpnum);
+#ifdef CONFIG_TREE_PREEMPT_RCU
+ seq_printf(m, "rcu_preempt: completed=%ld gpnum=%ld\n",
+ rcu_preempt_state.completed, rcu_preempt_state.gpnum);
+#endif /* #ifdef CONFIG_TREE_PREEMPT_RCU */
+ seq_printf(m, "rcu_sched: completed=%ld gpnum=%ld\n",
+ rcu_sched_state.completed, rcu_sched_state.gpnum);
seq_printf(m, "rcu_bh: completed=%ld gpnum=%ld\n",
rcu_bh_state.completed, rcu_bh_state.gpnum);
return 0;
static int show_rcu_pending(struct seq_file *m, void *unused)
{
- seq_puts(m, "rcu:\n");
- print_rcu_pendings(m, &rcu_state);
+#ifdef CONFIG_TREE_PREEMPT_RCU
+ seq_puts(m, "rcu_preempt:\n");
+ print_rcu_pendings(m, &rcu_preempt_state);
+#endif /* #ifdef CONFIG_TREE_PREEMPT_RCU */
+ seq_puts(m, "rcu_sched:\n");
+ print_rcu_pendings(m, &rcu_sched_state);
seq_puts(m, "rcu_bh:\n");
print_rcu_pendings(m, &rcu_bh_state);
return 0;
};
static struct dentry *rcudir;
-static struct dentry *datadir;
-static struct dentry *datadir_csv;
-static struct dentry *gpdir;
-static struct dentry *hierdir;
-static struct dentry *rcu_pendingdir;
static int __init rcuclassic_trace_init(void)
{
+ struct dentry *retval;
+
rcudir = debugfs_create_dir("rcu", NULL);
if (!rcudir)
- goto out;
+ goto free_out;
- datadir = debugfs_create_file("rcudata", 0444, rcudir,
+ retval = debugfs_create_file("rcudata", 0444, rcudir,
NULL, &rcudata_fops);
- if (!datadir)
+ if (!retval)
goto free_out;
- datadir_csv = debugfs_create_file("rcudata.csv", 0444, rcudir,
+ retval = debugfs_create_file("rcudata.csv", 0444, rcudir,
NULL, &rcudata_csv_fops);
- if (!datadir_csv)
+ if (!retval)
goto free_out;
- gpdir = debugfs_create_file("rcugp", 0444, rcudir, NULL, &rcugp_fops);
- if (!gpdir)
+ retval = debugfs_create_file("rcugp", 0444, rcudir, NULL, &rcugp_fops);
+ if (!retval)
goto free_out;
- hierdir = debugfs_create_file("rcuhier", 0444, rcudir,
+ retval = debugfs_create_file("rcuhier", 0444, rcudir,
NULL, &rcuhier_fops);
- if (!hierdir)
+ if (!retval)
goto free_out;
- rcu_pendingdir = debugfs_create_file("rcu_pending", 0444, rcudir,
+ retval = debugfs_create_file("rcu_pending", 0444, rcudir,
NULL, &rcu_pending_fops);
- if (!rcu_pendingdir)
+ if (!retval)
goto free_out;
return 0;
free_out:
- if (datadir)
- debugfs_remove(datadir);
- if (datadir_csv)
- debugfs_remove(datadir_csv);
- if (gpdir)
- debugfs_remove(gpdir);
- debugfs_remove(rcudir);
-out:
+ debugfs_remove_recursive(rcudir);
return 1;
}
static void __exit rcuclassic_trace_cleanup(void)
{
- debugfs_remove(datadir);
- debugfs_remove(datadir_csv);
- debugfs_remove(gpdir);
- debugfs_remove(hierdir);
- debugfs_remove(rcu_pendingdir);
- debugfs_remove(rcudir);
+ debugfs_remove_recursive(rcudir);
}
if (!rt_mutex_owner(lock) || try_to_steal_lock(lock, task)) {
/* We got the lock for task. */
debug_rt_mutex_lock(lock);
-
rt_mutex_set_owner(lock, task, 0);
-
+ spin_unlock(&lock->wait_lock);
rt_mutex_deadlock_account_lock(lock, task);
return 1;
}
ret = task_blocks_on_rt_mutex(lock, waiter, task, detect_deadlock);
-
if (ret && !waiter->task) {
/*
* Reset the return value. We might have
#endif
#ifdef CONFIG_SMP
unsigned long rt_nr_migratory;
+ unsigned long rt_nr_total;
int overloaded;
struct plist_head pushable_tasks;
#endif
p->se.avg_wakeup = sysctl_sched_wakeup_granularity;
#ifdef CONFIG_SCHEDSTATS
- p->se.wait_start = 0;
- p->se.sum_sleep_runtime = 0;
- p->se.sleep_start = 0;
- p->se.block_start = 0;
- p->se.sleep_max = 0;
- p->se.block_max = 0;
- p->se.exec_max = 0;
- p->se.slice_max = 0;
- p->se.wait_max = 0;
+ p->se.wait_start = 0;
+ p->se.wait_max = 0;
+ p->se.wait_count = 0;
+ p->se.wait_sum = 0;
+
+ p->se.sleep_start = 0;
+ p->se.sleep_max = 0;
+ p->se.sum_sleep_runtime = 0;
+
+ p->se.block_start = 0;
+ p->se.block_max = 0;
+ p->se.exec_max = 0;
+ p->se.slice_max = 0;
+
+ p->se.nr_migrations_cold = 0;
+ p->se.nr_failed_migrations_affine = 0;
+ p->se.nr_failed_migrations_running = 0;
+ p->se.nr_failed_migrations_hot = 0;
+ p->se.nr_forced_migrations = 0;
+ p->se.nr_forced2_migrations = 0;
+
+ p->se.nr_wakeups = 0;
+ p->se.nr_wakeups_sync = 0;
+ p->se.nr_wakeups_migrate = 0;
+ p->se.nr_wakeups_local = 0;
+ p->se.nr_wakeups_remote = 0;
+ p->se.nr_wakeups_affine = 0;
+ p->se.nr_wakeups_affine_attempts = 0;
+ p->se.nr_wakeups_passive = 0;
+ p->se.nr_wakeups_idle = 0;
+
#endif
INIT_LIST_HEAD(&p->rt.run_list);
preempt_disable();
cpu = smp_processor_id();
rq = cpu_rq(cpu);
- rcu_qsctr_inc(cpu);
+ rcu_sched_qs(cpu);
prev = rq->curr;
switch_count = &prev->nivcsw;
int resched = should_resched();
int ret = 0;
+ lockdep_assert_held(lock);
+
if (spin_needbreak(lock) || resched) {
spin_unlock(lock);
if (resched)
return ret;
}
+#define RCU_MIGRATION_IDLE 0
+#define RCU_MIGRATION_NEED_QS 1
+#define RCU_MIGRATION_GOT_QS 2
+#define RCU_MIGRATION_MUST_SYNC 3
+
/*
* migration_thread - this is a highprio system thread that performs
* thread migration by bumping thread off CPU then 'pushing' onto
*/
static int migration_thread(void *data)
{
+ int badcpu;
int cpu = (long)data;
struct rq *rq;
req = list_entry(head->next, struct migration_req, list);
list_del_init(head->next);
- spin_unlock(&rq->lock);
- __migrate_task(req->task, cpu, req->dest_cpu);
+ if (req->task != NULL) {
+ spin_unlock(&rq->lock);
+ __migrate_task(req->task, cpu, req->dest_cpu);
+ } else if (likely(cpu == (badcpu = smp_processor_id()))) {
+ req->dest_cpu = RCU_MIGRATION_GOT_QS;
+ spin_unlock(&rq->lock);
+ } else {
+ req->dest_cpu = RCU_MIGRATION_MUST_SYNC;
+ spin_unlock(&rq->lock);
+ WARN_ONCE(1, "migration_thread() on CPU %d, expected %d\n", badcpu, cpu);
+ }
local_irq_enable();
complete(&req->done);
static void calc_global_load_remove(struct rq *rq)
{
atomic_long_sub(rq->calc_load_active, &calc_load_tasks);
+ rq->calc_load_active = 0;
}
#endif /* CONFIG_HOTPLUG_CPU */
task_rq_unlock(rq, &flags);
get_task_struct(p);
cpu_rq(cpu)->migration_thread = p;
+ rq->calc_load_update = calc_load_update;
break;
case CPU_ONLINE:
/* Update our root-domain */
rq = cpu_rq(cpu);
spin_lock_irqsave(&rq->lock, flags);
- rq->calc_load_update = calc_load_update;
- rq->calc_load_active = 0;
if (rq->rd) {
BUG_ON(!cpumask_test_cpu(cpu, rq->rd->span));
#ifdef CONFIG_SMP
rt_rq->rt_nr_migratory = 0;
rt_rq->overloaded = 0;
- plist_head_init(&rq->rt.pushable_tasks, &rq->lock);
+ plist_head_init(&rt_rq->pushable_tasks, &rq->lock);
#endif
rt_rq->rt_time = 0;
.subsys_id = cpuacct_subsys_id,
};
#endif /* CONFIG_CGROUP_CPUACCT */
+
+#ifndef CONFIG_SMP
+
+int rcu_expedited_torture_stats(char *page)
+{
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rcu_expedited_torture_stats);
+
+void synchronize_sched_expedited(void)
+{
+}
+EXPORT_SYMBOL_GPL(synchronize_sched_expedited);
+
+#else /* #ifndef CONFIG_SMP */
+
+static DEFINE_PER_CPU(struct migration_req, rcu_migration_req);
+static DEFINE_MUTEX(rcu_sched_expedited_mutex);
+
+#define RCU_EXPEDITED_STATE_POST -2
+#define RCU_EXPEDITED_STATE_IDLE -1
+
+static int rcu_expedited_state = RCU_EXPEDITED_STATE_IDLE;
+
+int rcu_expedited_torture_stats(char *page)
+{
+ int cnt = 0;
+ int cpu;
+
+ cnt += sprintf(&page[cnt], "state: %d /", rcu_expedited_state);
+ for_each_online_cpu(cpu) {
+ cnt += sprintf(&page[cnt], " %d:%d",
+ cpu, per_cpu(rcu_migration_req, cpu).dest_cpu);
+ }
+ cnt += sprintf(&page[cnt], "\n");
+ return cnt;
+}
+EXPORT_SYMBOL_GPL(rcu_expedited_torture_stats);
+
+static long synchronize_sched_expedited_count;
+
+/*
+ * Wait for an rcu-sched grace period to elapse, but use "big hammer"
+ * approach to force grace period to end quickly. This consumes
+ * significant time on all CPUs, and is thus not recommended for
+ * any sort of common-case code.
+ *
+ * Note that it is illegal to call this function while holding any
+ * lock that is acquired by a CPU-hotplug notifier. Failing to
+ * observe this restriction will result in deadlock.
+ */
+void synchronize_sched_expedited(void)
+{
+ int cpu;
+ unsigned long flags;
+ bool need_full_sync = 0;
+ struct rq *rq;
+ struct migration_req *req;
+ long snap;
+ int trycount = 0;
+
+ smp_mb(); /* ensure prior mod happens before capturing snap. */
+ snap = ACCESS_ONCE(synchronize_sched_expedited_count) + 1;
+ get_online_cpus();
+ while (!mutex_trylock(&rcu_sched_expedited_mutex)) {
+ put_online_cpus();
+ if (trycount++ < 10)
+ udelay(trycount * num_online_cpus());
+ else {
+ synchronize_sched();
+ return;
+ }
+ if (ACCESS_ONCE(synchronize_sched_expedited_count) - snap > 0) {
+ smp_mb(); /* ensure test happens before caller kfree */
+ return;
+ }
+ get_online_cpus();
+ }
+ rcu_expedited_state = RCU_EXPEDITED_STATE_POST;
+ for_each_online_cpu(cpu) {
+ rq = cpu_rq(cpu);
+ req = &per_cpu(rcu_migration_req, cpu);
+ init_completion(&req->done);
+ req->task = NULL;
+ req->dest_cpu = RCU_MIGRATION_NEED_QS;
+ spin_lock_irqsave(&rq->lock, flags);
+ list_add(&req->list, &rq->migration_queue);
+ spin_unlock_irqrestore(&rq->lock, flags);
+ wake_up_process(rq->migration_thread);
+ }
+ for_each_online_cpu(cpu) {
+ rcu_expedited_state = cpu;
+ req = &per_cpu(rcu_migration_req, cpu);
+ rq = cpu_rq(cpu);
+ wait_for_completion(&req->done);
+ spin_lock_irqsave(&rq->lock, flags);
+ if (unlikely(req->dest_cpu == RCU_MIGRATION_MUST_SYNC))
+ need_full_sync = 1;
+ req->dest_cpu = RCU_MIGRATION_IDLE;
+ spin_unlock_irqrestore(&rq->lock, flags);
+ }
+ rcu_expedited_state = RCU_EXPEDITED_STATE_IDLE;
+ mutex_unlock(&rcu_sched_expedited_mutex);
+ put_online_cpus();
+ if (need_full_sync)
+ synchronize_sched();
+}
+EXPORT_SYMBOL_GPL(synchronize_sched_expedited);
+
+#endif /* #else #ifndef CONFIG_SMP */
if (cpumask_any_and(&p->cpus_allowed, vec->mask) >= nr_cpu_ids)
continue;
- if (lowest_mask)
+ if (lowest_mask) {
cpumask_and(lowest_mask, &p->cpus_allowed, vec->mask);
+
+ /*
+ * We have to ensure that we have at least one bit
+ * still set in the array, since the map could have
+ * been concurrently emptied between the first and
+ * second reads of vec->mask. If we hit this
+ * condition, simply act as though we never hit this
+ * priority level and continue on.
+ */
+ if (cpumask_any(lowest_mask) >= nr_cpu_ids)
+ continue;
+ }
+
return 1;
}
return min_vruntime;
}
+static inline int entity_before(struct sched_entity *a,
+ struct sched_entity *b)
+{
+ return (s64)(a->vruntime - b->vruntime) < 0;
+}
+
static inline s64 entity_key(struct cfs_rq *cfs_rq, struct sched_entity *se)
{
return se->vruntime - cfs_rq->min_vruntime;
static void enqueue_sleeper(struct cfs_rq *cfs_rq, struct sched_entity *se)
{
#ifdef CONFIG_SCHEDSTATS
+ struct task_struct *tsk = NULL;
+
+ if (entity_is_task(se))
+ tsk = task_of(se);
+
if (se->sleep_start) {
u64 delta = rq_of(cfs_rq)->clock - se->sleep_start;
- struct task_struct *tsk = task_of(se);
if ((s64)delta < 0)
delta = 0;
se->sleep_start = 0;
se->sum_sleep_runtime += delta;
- account_scheduler_latency(tsk, delta >> 10, 1);
+ if (tsk)
+ account_scheduler_latency(tsk, delta >> 10, 1);
}
if (se->block_start) {
u64 delta = rq_of(cfs_rq)->clock - se->block_start;
- struct task_struct *tsk = task_of(se);
if ((s64)delta < 0)
delta = 0;
se->block_start = 0;
se->sum_sleep_runtime += delta;
- /*
- * Blocking time is in units of nanosecs, so shift by 20 to
- * get a milliseconds-range estimation of the amount of
- * time that the task spent sleeping:
- */
- if (unlikely(prof_on == SLEEP_PROFILING)) {
-
- profile_hits(SLEEP_PROFILING, (void *)get_wchan(tsk),
- delta >> 20);
+ if (tsk) {
+ /*
+ * Blocking time is in units of nanosecs, so shift by
+ * 20 to get a milliseconds-range estimation of the
+ * amount of time that the task spent sleeping:
+ */
+ if (unlikely(prof_on == SLEEP_PROFILING)) {
+ profile_hits(SLEEP_PROFILING,
+ (void *)get_wchan(tsk),
+ delta >> 20);
+ }
+ account_scheduler_latency(tsk, delta >> 10, 0);
}
- account_scheduler_latency(tsk, delta >> 10, 0);
}
#endif
}
* all of which have the same weight.
*/
if (sched_feat(NORMALIZED_SLEEPER) &&
- task_of(se)->policy != SCHED_IDLE)
+ (!entity_is_task(se) ||
+ task_of(se)->policy != SCHED_IDLE))
thresh = calc_delta_fair(thresh, se);
vruntime -= thresh;
/*
* Already in the rightmost position?
*/
- if (unlikely(!rightmost || rightmost->vruntime < se->vruntime))
+ if (unlikely(!rightmost || entity_before(rightmost, se)))
return;
/*
/* 'curr' will be NULL if the child belongs to a different group */
if (sysctl_sched_child_runs_first && this_cpu == task_cpu(p) &&
- curr && curr->vruntime < se->vruntime) {
+ curr && entity_before(curr, se)) {
/*
* Upon rescheduling, sched_class::put_prev_task() will place
* 'current' within the tree based on its new key value.
#ifdef CONFIG_RT_GROUP_SCHED
+#define rt_entity_is_task(rt_se) (!(rt_se)->my_q)
+
static inline struct rq *rq_of_rt_rq(struct rt_rq *rt_rq)
{
return rt_rq->rq;
#else /* CONFIG_RT_GROUP_SCHED */
+#define rt_entity_is_task(rt_se) (1)
+
static inline struct rq *rq_of_rt_rq(struct rt_rq *rt_rq)
{
return container_of(rt_rq, struct rq, rt);
static void update_rt_migration(struct rt_rq *rt_rq)
{
- if (rt_rq->rt_nr_migratory && (rt_rq->rt_nr_running > 1)) {
+ if (rt_rq->rt_nr_migratory && rt_rq->rt_nr_total > 1) {
if (!rt_rq->overloaded) {
rt_set_overload(rq_of_rt_rq(rt_rq));
rt_rq->overloaded = 1;
static void inc_rt_migration(struct sched_rt_entity *rt_se, struct rt_rq *rt_rq)
{
+ if (!rt_entity_is_task(rt_se))
+ return;
+
+ rt_rq = &rq_of_rt_rq(rt_rq)->rt;
+
+ rt_rq->rt_nr_total++;
if (rt_se->nr_cpus_allowed > 1)
rt_rq->rt_nr_migratory++;
static void dec_rt_migration(struct sched_rt_entity *rt_se, struct rt_rq *rt_rq)
{
+ if (!rt_entity_is_task(rt_se))
+ return;
+
+ rt_rq = &rq_of_rt_rq(rt_rq)->rt;
+
+ rt_rq->rt_nr_total--;
if (rt_se->nr_cpus_allowed > 1)
rt_rq->rt_nr_migratory--;
stack_t oss;
int error;
- if (uoss) {
- oss.ss_sp = (void __user *) current->sas_ss_sp;
- oss.ss_size = current->sas_ss_size;
- oss.ss_flags = sas_ss_flags(sp);
- }
+ oss.ss_sp = (void __user *) current->sas_ss_sp;
+ oss.ss_size = current->sas_ss_size;
+ oss.ss_flags = sas_ss_flags(sp);
if (uss) {
void __user *ss_sp;
int ss_flags;
error = -EFAULT;
- if (!access_ok(VERIFY_READ, uss, sizeof(*uss))
- || __get_user(ss_sp, &uss->ss_sp)
- || __get_user(ss_flags, &uss->ss_flags)
- || __get_user(ss_size, &uss->ss_size))
+ if (!access_ok(VERIFY_READ, uss, sizeof(*uss)))
+ goto out;
+ error = __get_user(ss_sp, &uss->ss_sp) |
+ __get_user(ss_flags, &uss->ss_flags) |
+ __get_user(ss_size, &uss->ss_size);
+ if (error)
goto out;
error = -EPERM;
current->sas_ss_size = ss_size;
}
+ error = 0;
if (uoss) {
error = -EFAULT;
- if (copy_to_user(uoss, &oss, sizeof(oss)))
+ if (!access_ok(VERIFY_WRITE, uoss, sizeof(*uoss)))
goto out;
+ error = __put_user(oss.ss_sp, &uoss->ss_sp) |
+ __put_user(oss.ss_size, &uoss->ss_size) |
+ __put_user(oss.ss_flags, &uoss->ss_flags);
}
- error = 0;
out:
return error;
}
return NOTIFY_BAD;
break;
-#ifdef CONFIG_CPU_HOTPLUG
+#ifdef CONFIG_HOTPLUG_CPU
case CPU_UP_CANCELED:
case CPU_UP_CANCELED_FROZEN:
preempt_count() = prev_count;
}
- rcu_bh_qsctr_inc(cpu);
+ rcu_bh_qs(cpu);
}
h++;
pending >>= 1;
softirq_vec[nr].action = action;
}
-/* Tasklets */
+/*
+ * Tasklets
+ */
struct tasklet_head
{
struct tasklet_struct *head;
EXPORT_SYMBOL(tasklet_kill);
+/*
+ * tasklet_hrtimer
+ */
+
+/*
+ * The trampoline is called when the hrtimer expires. If this is
+ * called from the hrtimer interrupt then we schedule the tasklet as
+ * the timer callback function expects to run in softirq context. If
+ * it's called in softirq context anyway (i.e. high resolution timers
+ * disabled) then the hrtimer callback is called right away.
+ */
+static enum hrtimer_restart __hrtimer_tasklet_trampoline(struct hrtimer *timer)
+{
+ struct tasklet_hrtimer *ttimer =
+ container_of(timer, struct tasklet_hrtimer, timer);
+
+ if (hrtimer_is_hres_active(timer)) {
+ tasklet_hi_schedule(&ttimer->tasklet);
+ return HRTIMER_NORESTART;
+ }
+ return ttimer->function(timer);
+}
+
+/*
+ * Helper function which calls the hrtimer callback from
+ * tasklet/softirq context
+ */
+static void __tasklet_hrtimer_trampoline(unsigned long data)
+{
+ struct tasklet_hrtimer *ttimer = (void *)data;
+ enum hrtimer_restart restart;
+
+ restart = ttimer->function(&ttimer->timer);
+ if (restart != HRTIMER_NORESTART)
+ hrtimer_restart(&ttimer->timer);
+}
+
+/**
+ * tasklet_hrtimer_init - Init a tasklet/hrtimer combo for softirq callbacks
+ * @ttimer: tasklet_hrtimer which is initialized
+ * @function: hrtimer callback funtion which gets called from softirq context
+ * @which_clock: clock id (CLOCK_MONOTONIC/CLOCK_REALTIME)
+ * @mode: hrtimer mode (HRTIMER_MODE_ABS/HRTIMER_MODE_REL)
+ */
+void tasklet_hrtimer_init(struct tasklet_hrtimer *ttimer,
+ enum hrtimer_restart (*function)(struct hrtimer *),
+ clockid_t which_clock, enum hrtimer_mode mode)
+{
+ hrtimer_init(&ttimer->timer, which_clock, mode);
+ ttimer->timer.function = __hrtimer_tasklet_trampoline;
+ tasklet_init(&ttimer->tasklet, __tasklet_hrtimer_trampoline,
+ (unsigned long)ttimer);
+ ttimer->function = function;
+}
+EXPORT_SYMBOL_GPL(tasklet_hrtimer_init);
+
+/*
+ * Remote softirq bits
+ */
+
DEFINE_PER_CPU(struct list_head [NR_SOFTIRQS], softirq_work_list);
EXPORT_PER_CPU_SYMBOL(softirq_work_list);
preempt_enable_no_resched();
cond_resched();
preempt_disable();
- rcu_qsctr_inc((long)__bind_cpu);
+ rcu_sched_qs((long)__bind_cpu);
}
preempt_enable();
set_current_state(TASK_INTERRUPTIBLE);
#include <linux/debug_locks.h>
#include <linux/module.h>
+#ifndef _spin_trylock
int __lockfunc _spin_trylock(spinlock_t *lock)
{
- preempt_disable();
- if (_raw_spin_trylock(lock)) {
- spin_acquire(&lock->dep_map, 0, 1, _RET_IP_);
- return 1;
- }
-
- preempt_enable();
- return 0;
+ return __spin_trylock(lock);
}
EXPORT_SYMBOL(_spin_trylock);
+#endif
+#ifndef _read_trylock
int __lockfunc _read_trylock(rwlock_t *lock)
{
- preempt_disable();
- if (_raw_read_trylock(lock)) {
- rwlock_acquire_read(&lock->dep_map, 0, 1, _RET_IP_);
- return 1;
- }
-
- preempt_enable();
- return 0;
+ return __read_trylock(lock);
}
EXPORT_SYMBOL(_read_trylock);
+#endif
+#ifndef _write_trylock
int __lockfunc _write_trylock(rwlock_t *lock)
{
- preempt_disable();
- if (_raw_write_trylock(lock)) {
- rwlock_acquire(&lock->dep_map, 0, 1, _RET_IP_);
- return 1;
- }
-
- preempt_enable();
- return 0;
+ return __write_trylock(lock);
}
EXPORT_SYMBOL(_write_trylock);
+#endif
/*
* If lockdep is enabled then we use the non-preemption spin-ops
*/
#if !defined(CONFIG_GENERIC_LOCKBREAK) || defined(CONFIG_DEBUG_LOCK_ALLOC)
+#ifndef _read_lock
void __lockfunc _read_lock(rwlock_t *lock)
{
- preempt_disable();
- rwlock_acquire_read(&lock->dep_map, 0, 0, _RET_IP_);
- LOCK_CONTENDED(lock, _raw_read_trylock, _raw_read_lock);
+ __read_lock(lock);
}
EXPORT_SYMBOL(_read_lock);
+#endif
+#ifndef _spin_lock_irqsave
unsigned long __lockfunc _spin_lock_irqsave(spinlock_t *lock)
{
- unsigned long flags;
-
- local_irq_save(flags);
- preempt_disable();
- spin_acquire(&lock->dep_map, 0, 0, _RET_IP_);
- /*
- * On lockdep we dont want the hand-coded irq-enable of
- * _raw_spin_lock_flags() code, because lockdep assumes
- * that interrupts are not re-enabled during lock-acquire:
- */
-#ifdef CONFIG_LOCKDEP
- LOCK_CONTENDED(lock, _raw_spin_trylock, _raw_spin_lock);
-#else
- _raw_spin_lock_flags(lock, &flags);
-#endif
- return flags;
+ return __spin_lock_irqsave(lock);
}
EXPORT_SYMBOL(_spin_lock_irqsave);
+#endif
+#ifndef _spin_lock_irq
void __lockfunc _spin_lock_irq(spinlock_t *lock)
{
- local_irq_disable();
- preempt_disable();
- spin_acquire(&lock->dep_map, 0, 0, _RET_IP_);
- LOCK_CONTENDED(lock, _raw_spin_trylock, _raw_spin_lock);
+ __spin_lock_irq(lock);
}
EXPORT_SYMBOL(_spin_lock_irq);
+#endif
+#ifndef _spin_lock_bh
void __lockfunc _spin_lock_bh(spinlock_t *lock)
{
- local_bh_disable();
- preempt_disable();
- spin_acquire(&lock->dep_map, 0, 0, _RET_IP_);
- LOCK_CONTENDED(lock, _raw_spin_trylock, _raw_spin_lock);
+ __spin_lock_bh(lock);
}
EXPORT_SYMBOL(_spin_lock_bh);
+#endif
+#ifndef _read_lock_irqsave
unsigned long __lockfunc _read_lock_irqsave(rwlock_t *lock)
{
- unsigned long flags;
-
- local_irq_save(flags);
- preempt_disable();
- rwlock_acquire_read(&lock->dep_map, 0, 0, _RET_IP_);
- LOCK_CONTENDED_FLAGS(lock, _raw_read_trylock, _raw_read_lock,
- _raw_read_lock_flags, &flags);
- return flags;
+ return __read_lock_irqsave(lock);
}
EXPORT_SYMBOL(_read_lock_irqsave);
+#endif
+#ifndef _read_lock_irq
void __lockfunc _read_lock_irq(rwlock_t *lock)
{
- local_irq_disable();
- preempt_disable();
- rwlock_acquire_read(&lock->dep_map, 0, 0, _RET_IP_);
- LOCK_CONTENDED(lock, _raw_read_trylock, _raw_read_lock);
+ __read_lock_irq(lock);
}
EXPORT_SYMBOL(_read_lock_irq);
+#endif
+#ifndef _read_lock_bh
void __lockfunc _read_lock_bh(rwlock_t *lock)
{
- local_bh_disable();
- preempt_disable();
- rwlock_acquire_read(&lock->dep_map, 0, 0, _RET_IP_);
- LOCK_CONTENDED(lock, _raw_read_trylock, _raw_read_lock);
+ __read_lock_bh(lock);
}
EXPORT_SYMBOL(_read_lock_bh);
+#endif
+#ifndef _write_lock_irqsave
unsigned long __lockfunc _write_lock_irqsave(rwlock_t *lock)
{
- unsigned long flags;
-
- local_irq_save(flags);
- preempt_disable();
- rwlock_acquire(&lock->dep_map, 0, 0, _RET_IP_);
- LOCK_CONTENDED_FLAGS(lock, _raw_write_trylock, _raw_write_lock,
- _raw_write_lock_flags, &flags);
- return flags;
+ return __write_lock_irqsave(lock);
}
EXPORT_SYMBOL(_write_lock_irqsave);
+#endif
+#ifndef _write_lock_irq
void __lockfunc _write_lock_irq(rwlock_t *lock)
{
- local_irq_disable();
- preempt_disable();
- rwlock_acquire(&lock->dep_map, 0, 0, _RET_IP_);
- LOCK_CONTENDED(lock, _raw_write_trylock, _raw_write_lock);
+ __write_lock_irq(lock);
}
EXPORT_SYMBOL(_write_lock_irq);
+#endif
+#ifndef _write_lock_bh
void __lockfunc _write_lock_bh(rwlock_t *lock)
{
- local_bh_disable();
- preempt_disable();
- rwlock_acquire(&lock->dep_map, 0, 0, _RET_IP_);
- LOCK_CONTENDED(lock, _raw_write_trylock, _raw_write_lock);
+ __write_lock_bh(lock);
}
EXPORT_SYMBOL(_write_lock_bh);
+#endif
+#ifndef _spin_lock
void __lockfunc _spin_lock(spinlock_t *lock)
{
- preempt_disable();
- spin_acquire(&lock->dep_map, 0, 0, _RET_IP_);
- LOCK_CONTENDED(lock, _raw_spin_trylock, _raw_spin_lock);
+ __spin_lock(lock);
}
-
EXPORT_SYMBOL(_spin_lock);
+#endif
+#ifndef _write_lock
void __lockfunc _write_lock(rwlock_t *lock)
{
- preempt_disable();
- rwlock_acquire(&lock->dep_map, 0, 0, _RET_IP_);
- LOCK_CONTENDED(lock, _raw_write_trylock, _raw_write_lock);
+ __write_lock(lock);
}
-
EXPORT_SYMBOL(_write_lock);
+#endif
#else /* CONFIG_PREEMPT: */
#endif
+#ifndef _spin_unlock
void __lockfunc _spin_unlock(spinlock_t *lock)
{
- spin_release(&lock->dep_map, 1, _RET_IP_);
- _raw_spin_unlock(lock);
- preempt_enable();
+ __spin_unlock(lock);
}
EXPORT_SYMBOL(_spin_unlock);
+#endif
+#ifndef _write_unlock
void __lockfunc _write_unlock(rwlock_t *lock)
{
- rwlock_release(&lock->dep_map, 1, _RET_IP_);
- _raw_write_unlock(lock);
- preempt_enable();
+ __write_unlock(lock);
}
EXPORT_SYMBOL(_write_unlock);
+#endif
+#ifndef _read_unlock
void __lockfunc _read_unlock(rwlock_t *lock)
{
- rwlock_release(&lock->dep_map, 1, _RET_IP_);
- _raw_read_unlock(lock);
- preempt_enable();
+ __read_unlock(lock);
}
EXPORT_SYMBOL(_read_unlock);
+#endif
+#ifndef _spin_unlock_irqrestore
void __lockfunc _spin_unlock_irqrestore(spinlock_t *lock, unsigned long flags)
{
- spin_release(&lock->dep_map, 1, _RET_IP_);
- _raw_spin_unlock(lock);
- local_irq_restore(flags);
- preempt_enable();
+ __spin_unlock_irqrestore(lock, flags);
}
EXPORT_SYMBOL(_spin_unlock_irqrestore);
+#endif
+#ifndef _spin_unlock_irq
void __lockfunc _spin_unlock_irq(spinlock_t *lock)
{
- spin_release(&lock->dep_map, 1, _RET_IP_);
- _raw_spin_unlock(lock);
- local_irq_enable();
- preempt_enable();
+ __spin_unlock_irq(lock);
}
EXPORT_SYMBOL(_spin_unlock_irq);
+#endif
+#ifndef _spin_unlock_bh
void __lockfunc _spin_unlock_bh(spinlock_t *lock)
{
- spin_release(&lock->dep_map, 1, _RET_IP_);
- _raw_spin_unlock(lock);
- preempt_enable_no_resched();
- local_bh_enable_ip((unsigned long)__builtin_return_address(0));
+ __spin_unlock_bh(lock);
}
EXPORT_SYMBOL(_spin_unlock_bh);
+#endif
+#ifndef _read_unlock_irqrestore
void __lockfunc _read_unlock_irqrestore(rwlock_t *lock, unsigned long flags)
{
- rwlock_release(&lock->dep_map, 1, _RET_IP_);
- _raw_read_unlock(lock);
- local_irq_restore(flags);
- preempt_enable();
+ __read_unlock_irqrestore(lock, flags);
}
EXPORT_SYMBOL(_read_unlock_irqrestore);
+#endif
+#ifndef _read_unlock_irq
void __lockfunc _read_unlock_irq(rwlock_t *lock)
{
- rwlock_release(&lock->dep_map, 1, _RET_IP_);
- _raw_read_unlock(lock);
- local_irq_enable();
- preempt_enable();
+ __read_unlock_irq(lock);
}
EXPORT_SYMBOL(_read_unlock_irq);
+#endif
+#ifndef _read_unlock_bh
void __lockfunc _read_unlock_bh(rwlock_t *lock)
{
- rwlock_release(&lock->dep_map, 1, _RET_IP_);
- _raw_read_unlock(lock);
- preempt_enable_no_resched();
- local_bh_enable_ip((unsigned long)__builtin_return_address(0));
+ __read_unlock_bh(lock);
}
EXPORT_SYMBOL(_read_unlock_bh);
+#endif
+#ifndef _write_unlock_irqrestore
void __lockfunc _write_unlock_irqrestore(rwlock_t *lock, unsigned long flags)
{
- rwlock_release(&lock->dep_map, 1, _RET_IP_);
- _raw_write_unlock(lock);
- local_irq_restore(flags);
- preempt_enable();
+ __write_unlock_irqrestore(lock, flags);
}
EXPORT_SYMBOL(_write_unlock_irqrestore);
+#endif
+#ifndef _write_unlock_irq
void __lockfunc _write_unlock_irq(rwlock_t *lock)
{
- rwlock_release(&lock->dep_map, 1, _RET_IP_);
- _raw_write_unlock(lock);
- local_irq_enable();
- preempt_enable();
+ __write_unlock_irq(lock);
}
EXPORT_SYMBOL(_write_unlock_irq);
+#endif
+#ifndef _write_unlock_bh
void __lockfunc _write_unlock_bh(rwlock_t *lock)
{
- rwlock_release(&lock->dep_map, 1, _RET_IP_);
- _raw_write_unlock(lock);
- preempt_enable_no_resched();
- local_bh_enable_ip((unsigned long)__builtin_return_address(0));
+ __write_unlock_bh(lock);
}
EXPORT_SYMBOL(_write_unlock_bh);
+#endif
+#ifndef _spin_trylock_bh
int __lockfunc _spin_trylock_bh(spinlock_t *lock)
{
- local_bh_disable();
- preempt_disable();
- if (_raw_spin_trylock(lock)) {
- spin_acquire(&lock->dep_map, 0, 1, _RET_IP_);
- return 1;
- }
-
- preempt_enable_no_resched();
- local_bh_enable_ip((unsigned long)__builtin_return_address(0));
- return 0;
+ return __spin_trylock_bh(lock);
}
EXPORT_SYMBOL(_spin_trylock_bh);
+#endif
notrace int in_lock_functions(unsigned long addr)
{
{
.ctl_name = CTL_UNNUMBERED,
.procname = "mmap_min_addr",
- .data = &mmap_min_addr,
- .maxlen = sizeof(unsigned long),
+ .data = &dac_mmap_min_addr,
+ .maxlen = sizeof(unsigned long),
.mode = 0644,
- .proc_handler = &proc_doulongvec_minmax,
+ .proc_handler = &mmap_min_addr_handler,
},
#ifdef CONFIG_NUMA
{
*/
int clockevents_register_notifier(struct notifier_block *nb)
{
+ unsigned long flags;
int ret;
- spin_lock(&clockevents_lock);
+ spin_lock_irqsave(&clockevents_lock, flags);
ret = raw_notifier_chain_register(&clockevents_chain, nb);
- spin_unlock(&clockevents_lock);
+ spin_unlock_irqrestore(&clockevents_lock, flags);
return ret;
}
*/
void clockevents_register_device(struct clock_event_device *dev)
{
+ unsigned long flags;
+
BUG_ON(dev->mode != CLOCK_EVT_MODE_UNUSED);
BUG_ON(!dev->cpumask);
- spin_lock(&clockevents_lock);
+ spin_lock_irqsave(&clockevents_lock, flags);
list_add(&dev->list, &clockevent_devices);
clockevents_do_notify(CLOCK_EVT_NOTIFY_ADD, dev);
clockevents_notify_released();
- spin_unlock(&clockevents_lock);
+ spin_unlock_irqrestore(&clockevents_lock, flags);
}
EXPORT_SYMBOL_GPL(clockevents_register_device);
void clockevents_notify(unsigned long reason, void *arg)
{
struct list_head *node, *tmp;
+ unsigned long flags;
- spin_lock(&clockevents_lock);
+ spin_lock_irqsave(&clockevents_lock, flags);
clockevents_do_notify(reason, arg);
switch (reason) {
default:
break;
}
- spin_unlock(&clockevents_lock);
+ spin_unlock_irqrestore(&clockevents_lock, flags);
}
EXPORT_SYMBOL_GPL(clockevents_notify);
-
-ktime_t clockevents_get_next_event(int cpu)
-{
- struct tick_device *td;
- struct clock_event_device *dev;
-
- td = &per_cpu(tick_cpu_device, cpu);
- dev = td->evtdev;
-
- return dev->next_event;
-}
#endif
* Check to make sure we don't switch to a non-highres capable
* clocksource if the tick code is in oneshot mode (highres or nohz)
*/
- if (tick_oneshot_mode_active() &&
+ if (tick_oneshot_mode_active() && ovr &&
!(ovr->flags & CLOCK_SOURCE_VALID_FOR_HRES)) {
printk(KERN_WARNING "%s clocksource is not HRT compatible. "
"Cannot switch while in HRT/NOHZ mode\n", ovr->name);
* Powerstate information: The system enters/leaves a state, where
* affected devices might stop
*/
-static void tick_do_broadcast_on_off(void *why)
+static void tick_do_broadcast_on_off(unsigned long *reason)
{
struct clock_event_device *bc, *dev;
struct tick_device *td;
- unsigned long flags, *reason = why;
+ unsigned long flags;
int cpu, bc_stopped;
spin_lock_irqsave(&tick_broadcast_lock, flags);
printk(KERN_ERR "tick-broadcast: ignoring broadcast for "
"offline CPU #%d\n", *oncpu);
else
- smp_call_function_single(*oncpu, tick_do_broadcast_on_off,
- &reason, 1);
+ tick_do_broadcast_on_off(&reason);
}
/*
{
struct proc_dir_entry *pe;
- pe = proc_create("timer_list", 0644, NULL, &timer_list_fops);
+ pe = proc_create("timer_list", 0444, NULL, &timer_list_fops);
if (!pe)
return -ENOMEM;
return 0;
* networking code - if the timer is re-modified
* to be the same thing then just return:
*/
- if (timer->expires == expires && timer_pending(timer))
+ if (timer_pending(timer) && timer->expires == expires)
return 1;
return __mod_timer(timer, expires, false, TIMER_NOT_PINNED);
/* Note: this timer irq context must be accounted for as well. */
account_process_tick(p, user_tick);
run_local_timers();
- if (rcu_pending(cpu))
- rcu_check_callbacks(cpu, user_tick);
+ rcu_check_callbacks(cpu, user_tick);
printk_tick();
scheduler_tick();
run_posix_cpu_timers(p);
{
debugfs_remove(bt->msg_file);
debugfs_remove(bt->dropped_file);
- debugfs_remove(bt->dir);
relay_close(bt->rchan);
+ debugfs_remove(bt->dir);
free_percpu(bt->sequence);
free_percpu(bt->msg_data);
kfree(bt);
static int blk_remove_buf_file_callback(struct dentry *dentry)
{
- struct dentry *parent = dentry->d_parent;
debugfs_remove(dentry);
- /*
- * this will fail for all but the last file, but that is ok. what we
- * care about is the top level buts->name directory going away, when
- * the last trace file is gone. Then we don't have to rmdir() that
- * manually on trace stop, so it nicely solves the issue with
- * force killing of running traces.
- */
-
- debugfs_remove(parent);
return 0;
}
.stat_show = function_stat_show
};
-static void ftrace_profile_debugfs(struct dentry *d_tracer)
+static __init void ftrace_profile_debugfs(struct dentry *d_tracer)
{
struct ftrace_profile_stat *stat;
struct dentry *entry;
* The files created are permanent, if something happens
* we still do not free memory.
*/
- kfree(stat);
WARN(1,
"Could not allocate stat file for cpu %d\n",
cpu);
}
#else /* CONFIG_FUNCTION_PROFILER */
-static void ftrace_profile_debugfs(struct dentry *d_tracer)
+static __init void ftrace_profile_debugfs(struct dentry *d_tracer)
{
}
#endif /* CONFIG_FUNCTION_PROFILER */
mutex_lock(&ftrace_regex_lock);
if ((file->f_mode & FMODE_WRITE) &&
- !(file->f_flags & O_APPEND))
+ (file->f_flags & O_TRUNC))
ftrace_filter_reset(enable);
if (file->f_mode & FMODE_READ) {
read++;
cnt--;
- if (!(iter->flags & ~FTRACE_ITER_CONT)) {
+ /*
+ * If the parser haven't finished with the last write,
+ * continue reading the user input without skipping spaces.
+ */
+ if (!(iter->flags & FTRACE_ITER_CONT)) {
/* skip white space */
while (cnt && isspace(ch)) {
ret = get_user(ch, ubuf++);
cnt--;
}
+ /* only spaces were written */
if (isspace(ch)) {
- file->f_pos += read;
+ *ppos += read;
ret = read;
goto out;
}
if (ret)
goto out;
iter->buffer_idx = 0;
- } else
+ } else {
iter->flags |= FTRACE_ITER_CONT;
+ iter->buffer[iter->buffer_idx++] = ch;
+ }
-
- file->f_pos += read;
-
+ *ppos += read;
ret = read;
out:
mutex_unlock(&ftrace_regex_lock);
mutex_lock(&graph_lock);
if ((file->f_mode & FMODE_WRITE) &&
- !(file->f_flags & O_APPEND)) {
+ (file->f_flags & O_TRUNC)) {
ftrace_graph_count = 0;
memset(ftrace_graph_funcs, 0, sizeof(ftrace_graph_funcs));
}
return ret;
}
+static int
+ftrace_graph_release(struct inode *inode, struct file *file)
+{
+ if (file->f_mode & FMODE_READ)
+ seq_release(inode, file);
+ return 0;
+}
+
static int
ftrace_set_func(unsigned long *array, int *idx, char *buffer)
{
}
static const struct file_operations ftrace_graph_fops = {
- .open = ftrace_graph_open,
- .read = seq_read,
- .write = ftrace_graph_write,
+ .open = ftrace_graph_open,
+ .read = seq_read,
+ .write = ftrace_graph_write,
+ .release = ftrace_graph_release,
};
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
put_online_cpus();
+ kfree(buffer->buffers);
free_cpumask_var(buffer->cpumask);
kfree(buffer);
*/
RB_WARN_ON(buffer, !local_read(&cpu_buffer->committing));
- if (!rb_try_to_discard(cpu_buffer, event))
+ if (rb_try_to_discard(cpu_buffer, event))
goto out;
/*
* the box. Return the padding, and we will release
* the current locks, and try again.
*/
- rb_advance_reader(cpu_buffer);
return event;
case RINGBUF_TYPE_TIME_EXTEND:
* buffer too. A one time deal is all you get from reading
* the ring buffer from an NMI.
*/
- if (likely(!in_nmi() && !oops_in_progress))
+ if (likely(!in_nmi()))
return 1;
tracing_off_permanent();
if (dolock)
spin_lock(&cpu_buffer->reader_lock);
event = rb_buffer_peek(buffer, cpu, ts);
+ if (event && event->type_len == RINGBUF_TYPE_PADDING)
+ rb_advance_reader(cpu_buffer);
if (dolock)
spin_unlock(&cpu_buffer->reader_lock);
local_irq_restore(flags);
spin_lock(&cpu_buffer->reader_lock);
event = rb_buffer_peek(buffer, cpu, ts);
- if (!event)
- goto out_unlock;
-
- rb_advance_reader(cpu_buffer);
+ if (event)
+ rb_advance_reader(cpu_buffer);
- out_unlock:
if (dolock)
spin_unlock(&cpu_buffer->reader_lock);
local_irq_restore(flags);
((pc & SOFTIRQ_MASK) ? TRACE_FLAG_SOFTIRQ : 0) |
(need_resched() ? TRACE_FLAG_NEED_RESCHED : 0);
}
+EXPORT_SYMBOL_GPL(tracing_generic_entry_update);
struct ring_buffer_event *trace_buffer_lock_reserve(struct trace_array *tr,
int type,
/* If this file was open for write, then erase contents */
if ((file->f_mode & FMODE_WRITE) &&
- !(file->f_flags & O_APPEND)) {
+ (file->f_flags & O_TRUNC)) {
long cpu = (long) inode->i_private;
if (cpu == TRACE_PIPE_ALL_CPU)
break;
}
- trace_consume(iter);
+ if (ret != TRACE_TYPE_NO_CONSUME)
+ trace_consume(iter);
rem -= count;
if (!find_next_entry_inc(iter)) {
rem = 0;
if (ret < 0)
return ret;
- switch (val) {
- case 0:
- trace_flags &= ~(1 << index);
- break;
- case 1:
- trace_flags |= 1 << index;
- break;
-
- default:
+ if (val != 0 && val != 1)
return -EINVAL;
- }
+ set_tracer_flags(1 << index, val);
*ppos += cnt;
iter.pos = -1;
if (find_next_entry_inc(&iter) != NULL) {
- print_trace_line(&iter);
- trace_consume(&iter);
+ int ret;
+
+ ret = print_trace_line(&iter);
+ if (ret != TRACE_TYPE_NO_CONSUME)
+ trace_consume(&iter);
}
trace_printk_seq(&iter.seq);
struct trace_entry *trace_find_next_entry(struct trace_iterator *iter,
int *ent_cpu, u64 *ent_ts);
-void tracing_generic_entry_update(struct trace_entry *entry,
- unsigned long flags,
- int pc);
-
void default_wait_pipe(struct trace_iterator *iter);
void poll_wait_pipe(struct trace_iterator *iter);
mutex_lock(&event_mutex);
list_for_each_entry(event, &ftrace_events, list) {
- if (event->id == event_id) {
+ if (event->id == event_id && event->profile_enable) {
ret = event->profile_enable(event);
break;
}
const struct seq_operations *seq_ops;
if ((file->f_mode & FMODE_WRITE) &&
- !(file->f_flags & O_APPEND))
+ (file->f_flags & O_TRUNC))
ftrace_clear_events();
seq_ops = inode->i_private;
entry = trace_create_file("enable", 0644, call->dir, call,
enable);
- if (call->id)
+ if (call->id && call->profile_enable)
entry = trace_create_file("id", 0444, call->dir, call,
id);
return -ENOSPC;
}
- filter->preds[filter->n_preds] = pred;
- filter->n_preds++;
-
list_for_each_entry(call, &ftrace_events, list) {
if (!call->define_fields)
}
replace_filter_string(call->filter, filter_string);
}
+
+ filter->preds[filter->n_preds] = pred;
+ filter->n_preds++;
out:
return err;
}
if (elt->op == OP_AND || elt->op == OP_OR) {
pred = create_logical_pred(elt->op);
+ if (!pred)
+ return -ENOMEM;
if (call) {
err = filter_add_pred(ps, call, pred);
filter_free_pred(pred);
- } else
+ } else {
err = filter_add_subsystem_pred(ps, system,
pred, filter_string);
+ if (err)
+ filter_free_pred(pred);
+ }
if (err)
return err;
}
pred = create_pred(elt->op, operand1, operand2);
+ if (!pred)
+ return -ENOMEM;
if (call) {
err = filter_add_pred(ps, call, pred);
filter_free_pred(pred);
- } else
+ } else {
err = filter_add_subsystem_pred(ps, system, pred,
filter_string);
+ if (err)
+ filter_free_pred(pred);
+ }
if (err)
return err;
out_reg:
ret = register_ftrace_function_probe(glob, ops, count);
- return ret;
+ return ret < 0 ? ret : 0;
}
static struct ftrace_func_command ftrace_traceon_cmd = {
switch (entry->type) {
case TRACE_GRAPH_ENT: {
- struct ftrace_graph_ent_entry *field;
+ /*
+ * print_graph_entry() may consume the current event,
+ * thus @field may become invalid, so we need to save it.
+ * sizeof(struct ftrace_graph_ent_entry) is very small,
+ * it can be safely saved at the stack.
+ */
+ struct ftrace_graph_ent_entry *field, saved;
trace_assign_type(field, entry);
- return print_graph_entry(field, s, iter);
+ saved = *field;
+ return print_graph_entry(&saved, s, iter);
}
case TRACE_GRAPH_RET: {
struct ftrace_graph_ret_entry *field;
const char *str = *fmt;
int i;
- seq_printf(m, "0x%lx : \"", (unsigned long)fmt);
+ seq_printf(m, "0x%lx : \"", *(unsigned long *)fmt);
/*
* Tabs and new lines need to be converted.
static int stack_trace_open(struct inode *inode, struct file *file)
{
- int ret;
-
- ret = seq_open(file, &stack_trace_seq_ops);
-
- return ret;
+ return seq_open(file, &stack_trace_seq_ops);
}
static const struct file_operations stack_trace_fops = {
.open = stack_trace_open,
.read = seq_read,
.llseek = seq_lseek,
+ .release = seq_release,
};
int
}
}
-static void reset_stat_session(struct stat_session *session)
+static void __reset_stat_session(struct stat_session *session)
{
struct rb_node *node = session->stat_root.rb_node;
session->stat_root = RB_ROOT;
}
+static void reset_stat_session(struct stat_session *session)
+{
+ mutex_lock(&session->stat_mutex);
+ __reset_stat_session(session);
+ mutex_unlock(&session->stat_mutex);
+}
+
static void destroy_session(struct stat_session *session)
{
debugfs_remove(session->file);
- reset_stat_session(session);
+ __reset_stat_session(session);
mutex_destroy(&session->stat_mutex);
kfree(session);
}
int i;
mutex_lock(&session->stat_mutex);
- reset_stat_session(session);
+ __reset_stat_session(session);
if (!ts->stat_cmp)
ts->stat_cmp = dummy_cmp;
return ret;
exit_free_rbtree:
- reset_stat_session(session);
+ __reset_stat_session(session);
mutex_unlock(&session->stat_mutex);
return ret;
}
static int tracing_stat_open(struct inode *inode, struct file *file)
{
int ret;
-
+ struct seq_file *m;
struct stat_session *session = inode->i_private;
+ ret = stat_seq_init(session);
+ if (ret)
+ return ret;
+
ret = seq_open(file, &trace_stat_seq_ops);
- if (!ret) {
- struct seq_file *m = file->private_data;
- m->private = session;
- ret = stat_seq_init(session);
+ if (ret) {
+ reset_stat_session(session);
+ return ret;
}
+ m = file->private_data;
+ m->private = session;
return ret;
}
{
struct stat_session *session = i->i_private;
- mutex_lock(&session->stat_mutex);
reset_stat_session(session);
- mutex_unlock(&session->stat_mutex);
- return 0;
+ return seq_release(i, f);
}
static const struct file_operations tracing_stat_fops = {
#include <linux/wait.h>
#include <linux/hash.h>
-void init_waitqueue_head(wait_queue_head_t *q)
+void __init_waitqueue_head(wait_queue_head_t *q, struct lock_class_key *key)
{
spin_lock_init(&q->lock);
+ lockdep_set_class(&q->lock, key);
INIT_LIST_HEAD(&q->task_list);
}
-EXPORT_SYMBOL(init_waitqueue_head);
+EXPORT_SYMBOL(__init_waitqueue_head);
void add_wait_queue(wait_queue_head_t *q, wait_queue_t *wait)
{
* schedule_work - put work task in global workqueue
* @work: job to be done
*
- * This puts a job in the kernel-global workqueue.
+ * Returns zero if @work was already on the kernel-global workqueue and
+ * non-zero otherwise.
+ *
+ * This puts a job in the kernel-global workqueue if it was not already
+ * queued and leaves it in the same position on the kernel-global
+ * workqueue otherwise.
*/
int schedule_work(struct work_struct *work)
{
This is a relatively cheap check but if you care about maximum
performance, say N.
+config DEBUG_CREDENTIALS
+ bool "Debug credential management"
+ depends on DEBUG_KERNEL
+ help
+ Enable this to turn on some debug checking for credential
+ management. The additional code keeps track of the number of
+ pointers from task_structs to any given cred struct, and checks to
+ see that this number never exceeds the usage count of the cred
+ struct.
+
+ Furthermore, if SELinux is enabled, this also checks that the
+ security pointer in the cred struct is never seen to be invalid.
+
+ If unsure, say N.
+
#
# Select this config option from the architecture Kconfig, if it
# it is preferred to always offer frame pointers as a config
config RCU_CPU_STALL_DETECTOR
bool "Check for stalled CPUs delaying RCU grace periods"
- depends on CLASSIC_RCU || TREE_RCU
+ depends on TREE_RCU || TREE_PREEMPT_RCU
default n
help
This option causes RCU to printk information on which
idr.o int_sqrt.o extable.o prio_tree.o \
sha1.o irq_regs.o reciprocal_div.o argv_split.o \
proportions.o prio_heap.o ratelimit.o show_mem.o \
- is_single_threaded.o plist.o decompress.o
+ is_single_threaded.o plist.o decompress.o flex_array.o
lib-$(CONFIG_MMU) += ioremap.o
lib-$(CONFIG_SMP) += cpumask.o
#include <linux/cache.h>
#include <linux/spinlock.h>
#include <linux/init.h>
+#include <linux/module.h>
#include <asm/atomic.h>
/*
spin_unlock_irqrestore(lock, flags);
return val;
}
+EXPORT_SYMBOL(atomic64_read);
void atomic64_set(atomic64_t *v, long long i)
{
v->counter = i;
spin_unlock_irqrestore(lock, flags);
}
+EXPORT_SYMBOL(atomic64_set);
void atomic64_add(long long a, atomic64_t *v)
{
v->counter += a;
spin_unlock_irqrestore(lock, flags);
}
+EXPORT_SYMBOL(atomic64_add);
long long atomic64_add_return(long long a, atomic64_t *v)
{
spin_unlock_irqrestore(lock, flags);
return val;
}
+EXPORT_SYMBOL(atomic64_add_return);
void atomic64_sub(long long a, atomic64_t *v)
{
v->counter -= a;
spin_unlock_irqrestore(lock, flags);
}
+EXPORT_SYMBOL(atomic64_sub);
long long atomic64_sub_return(long long a, atomic64_t *v)
{
spin_unlock_irqrestore(lock, flags);
return val;
}
+EXPORT_SYMBOL(atomic64_sub_return);
long long atomic64_dec_if_positive(atomic64_t *v)
{
spin_unlock_irqrestore(lock, flags);
return val;
}
+EXPORT_SYMBOL(atomic64_dec_if_positive);
long long atomic64_cmpxchg(atomic64_t *v, long long o, long long n)
{
spin_unlock_irqrestore(lock, flags);
return val;
}
+EXPORT_SYMBOL(atomic64_cmpxchg);
long long atomic64_xchg(atomic64_t *v, long long new)
{
spin_unlock_irqrestore(lock, flags);
return val;
}
+EXPORT_SYMBOL(atomic64_xchg);
int atomic64_add_unless(atomic64_t *v, long long a, long long u)
{
spin_unlock_irqrestore(lock, flags);
return ret;
}
+EXPORT_SYMBOL(atomic64_add_unless);
static int init_atomic64_lock(void)
{
}
EXPORT_SYMBOL(__bitmap_shift_left);
-void __bitmap_and(unsigned long *dst, const unsigned long *bitmap1,
+int __bitmap_and(unsigned long *dst, const unsigned long *bitmap1,
const unsigned long *bitmap2, int bits)
{
int k;
int nr = BITS_TO_LONGS(bits);
+ unsigned long result = 0;
for (k = 0; k < nr; k++)
- dst[k] = bitmap1[k] & bitmap2[k];
+ result |= (dst[k] = bitmap1[k] & bitmap2[k]);
+ return result != 0;
}
EXPORT_SYMBOL(__bitmap_and);
}
EXPORT_SYMBOL(__bitmap_xor);
-void __bitmap_andnot(unsigned long *dst, const unsigned long *bitmap1,
+int __bitmap_andnot(unsigned long *dst, const unsigned long *bitmap1,
const unsigned long *bitmap2, int bits)
{
int k;
int nr = BITS_TO_LONGS(bits);
+ unsigned long result = 0;
for (k = 0; k < nr; k++)
- dst[k] = bitmap1[k] & ~bitmap2[k];
+ result |= (dst[k] = bitmap1[k] & ~bitmap2[k]);
+ return result != 0;
}
EXPORT_SYMBOL(__bitmap_andnot);
*/
-#ifndef STATIC
+#ifdef STATIC
+#define PREBOOT
+#else
#include <linux/decompress/bunzip2.h>
-#endif /* !STATIC */
+#include <linux/slab.h>
+#endif /* STATIC */
#include <linux/decompress/mm.h>
-#include <linux/slab.h>
#ifndef INT_MAX
#define INT_MAX 0x7fffffff
set_error_fn(error_fn);
if (flush)
outbuf = malloc(BZIP2_IOBUF_SIZE);
- else
- len -= 4; /* Uncompressed size hack active in pre-boot
- environment */
+
if (!outbuf) {
error("Could not allocate output bufer");
return -1;
return i;
}
-#define decompress bunzip2
+#ifdef PREBOOT
+STATIC int INIT decompress(unsigned char *buf, int len,
+ int(*fill)(void*, unsigned int),
+ int(*flush)(void*, unsigned int),
+ unsigned char *outbuf,
+ int *pos,
+ void(*error_fn)(char *x))
+{
+ return bunzip2(buf, len - 4, fill, flush, outbuf, pos, error_fn);
+}
+#endif
#include "zlib_inflate/inflate.h"
#include "zlib_inflate/infutil.h"
+#include <linux/slab.h>
#endif /* STATIC */
#include <linux/decompress/mm.h>
-#include <linux/slab.h>
-#define INBUF_LEN (16*1024)
+#define GZIP_IOBUF_SIZE (16*1024)
/* Included from initramfs et al code */
STATIC int INIT gunzip(unsigned char *buf, int len,
if (buf)
zbuf = buf;
else {
- zbuf = malloc(INBUF_LEN);
+ zbuf = malloc(GZIP_IOBUF_SIZE);
len = 0;
}
if (!zbuf) {
}
if (len == 0)
- len = fill(zbuf, INBUF_LEN);
+ len = fill(zbuf, GZIP_IOBUF_SIZE);
/* verify the gzip header */
if (len < 10 ||
while (rc == Z_OK) {
if (strm->avail_in == 0) {
/* TODO: handle case where both pos and fill are set */
- len = fill(zbuf, INBUF_LEN);
+ len = fill(zbuf, GZIP_IOBUF_SIZE);
if (len < 0) {
rc = -1;
error("read error");
*Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#ifndef STATIC
+#ifdef STATIC
+#define PREBOOT
+#else
#include <linux/decompress/unlzma.h>
+#include <linux/slab.h>
#endif /* STATIC */
#include <linux/decompress/mm.h>
-#include <linux/slab.h>
#define MIN(a, b) (((a) < (b)) ? (a) : (b))
int ret = -1;
set_error_fn(error_fn);
- if (!flush)
- in_len -= 4; /* Uncompressed size hack active in pre-boot
- environment */
+
if (buf)
inbuf = buf;
else
return ret;
}
-#define decompress unlzma
+#ifdef PREBOOT
+STATIC int INIT decompress(unsigned char *buf, int in_len,
+ int(*fill)(void*, unsigned int),
+ int(*flush)(void*, unsigned int),
+ unsigned char *output,
+ int *posp,
+ void(*error_fn)(char *x)
+ )
+{
+ return unlzma(buf, in_len - 4, fill, flush, output, posp, error_fn);
+}
+#endif
return true;
/* driver filter on and initialized */
- if (current_driver && dev->driver == current_driver)
+ if (current_driver && dev && dev->driver == current_driver)
return true;
+ /* driver filter on, but we can't filter on a NULL device... */
+ if (!dev)
+ return false;
+
if (current_driver || !current_driver_name[0])
return false;
return ret;
}
-#define err_printk(dev, entry, format, arg...) do { \
- error_count += 1; \
- if (driver_filter(dev) && \
- (show_all_errors || show_num_errors > 0)) { \
- WARN(1, "%s %s: " format, \
- dev_driver_string(dev), \
- dev_name(dev) , ## arg); \
- dump_entry_trace(entry); \
- } \
- if (!show_all_errors && show_num_errors > 0) \
- show_num_errors -= 1; \
+#define err_printk(dev, entry, format, arg...) do { \
+ error_count += 1; \
+ if (driver_filter(dev) && \
+ (show_all_errors || show_num_errors > 0)) { \
+ WARN(1, "%s %s: " format, \
+ dev ? dev_driver_string(dev) : "NULL", \
+ dev ? dev_name(dev) : "NULL", ## arg); \
+ dump_entry_trace(entry); \
+ } \
+ if (!show_all_errors && show_num_errors > 0) \
+ show_num_errors -= 1; \
} while (0);
/*
if (!newflags)
dt->num_enabled--;
- else if (!dp-flags)
+ else if (!dp->flags)
dt->num_enabled++;
dp->flags = newflags;
if (newflags) {
--- /dev/null
+/*
+ * Flexible array managed in PAGE_SIZE parts
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright IBM Corporation, 2009
+ *
+ * Author: Dave Hansen <dave@linux.vnet.ibm.com>
+ */
+
+#include <linux/flex_array.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+
+struct flex_array_part {
+ char elements[FLEX_ARRAY_PART_SIZE];
+};
+
+static inline int __elements_per_part(int element_size)
+{
+ return FLEX_ARRAY_PART_SIZE / element_size;
+}
+
+static inline int bytes_left_in_base(void)
+{
+ int element_offset = offsetof(struct flex_array, parts);
+ int bytes_left = FLEX_ARRAY_BASE_SIZE - element_offset;
+ return bytes_left;
+}
+
+static inline int nr_base_part_ptrs(void)
+{
+ return bytes_left_in_base() / sizeof(struct flex_array_part *);
+}
+
+/*
+ * If a user requests an allocation which is small
+ * enough, we may simply use the space in the
+ * flex_array->parts[] array to store the user
+ * data.
+ */
+static inline int elements_fit_in_base(struct flex_array *fa)
+{
+ int data_size = fa->element_size * fa->total_nr_elements;
+ if (data_size <= bytes_left_in_base())
+ return 1;
+ return 0;
+}
+
+/**
+ * flex_array_alloc - allocate a new flexible array
+ * @element_size: the size of individual elements in the array
+ * @total: total number of elements that this should hold
+ *
+ * Note: all locking must be provided by the caller.
+ *
+ * @total is used to size internal structures. If the user ever
+ * accesses any array indexes >=@total, it will produce errors.
+ *
+ * The maximum number of elements is defined as: the number of
+ * elements that can be stored in a page times the number of
+ * page pointers that we can fit in the base structure or (using
+ * integer math):
+ *
+ * (PAGE_SIZE/element_size) * (PAGE_SIZE-8)/sizeof(void *)
+ *
+ * Here's a table showing example capacities. Note that the maximum
+ * index that the get/put() functions is just nr_objects-1. This
+ * basically means that you get 4MB of storage on 32-bit and 2MB on
+ * 64-bit.
+ *
+ *
+ * Element size | Objects | Objects |
+ * PAGE_SIZE=4k | 32-bit | 64-bit |
+ * ---------------------------------|
+ * 1 bytes | 4186112 | 2093056 |
+ * 2 bytes | 2093056 | 1046528 |
+ * 3 bytes | 1395030 | 697515 |
+ * 4 bytes | 1046528 | 523264 |
+ * 32 bytes | 130816 | 65408 |
+ * 33 bytes | 126728 | 63364 |
+ * 2048 bytes | 2044 | 1022 |
+ * 2049 bytes | 1022 | 511 |
+ * void * | 1046528 | 261632 |
+ *
+ * Since 64-bit pointers are twice the size, we lose half the
+ * capacity in the base structure. Also note that no effort is made
+ * to efficiently pack objects across page boundaries.
+ */
+struct flex_array *flex_array_alloc(int element_size, unsigned int total,
+ gfp_t flags)
+{
+ struct flex_array *ret;
+ int max_size = nr_base_part_ptrs() * __elements_per_part(element_size);
+
+ /* max_size will end up 0 if element_size > PAGE_SIZE */
+ if (total > max_size)
+ return NULL;
+ ret = kzalloc(sizeof(struct flex_array), flags);
+ if (!ret)
+ return NULL;
+ ret->element_size = element_size;
+ ret->total_nr_elements = total;
+ return ret;
+}
+
+static int fa_element_to_part_nr(struct flex_array *fa,
+ unsigned int element_nr)
+{
+ return element_nr / __elements_per_part(fa->element_size);
+}
+
+/**
+ * flex_array_free_parts - just free the second-level pages
+ *
+ * This is to be used in cases where the base 'struct flex_array'
+ * has been statically allocated and should not be free.
+ */
+void flex_array_free_parts(struct flex_array *fa)
+{
+ int part_nr;
+ int max_part = nr_base_part_ptrs();
+
+ if (elements_fit_in_base(fa))
+ return;
+ for (part_nr = 0; part_nr < max_part; part_nr++)
+ kfree(fa->parts[part_nr]);
+}
+
+void flex_array_free(struct flex_array *fa)
+{
+ flex_array_free_parts(fa);
+ kfree(fa);
+}
+
+static unsigned int index_inside_part(struct flex_array *fa,
+ unsigned int element_nr)
+{
+ unsigned int part_offset;
+
+ part_offset = element_nr % __elements_per_part(fa->element_size);
+ return part_offset * fa->element_size;
+}
+
+static struct flex_array_part *
+__fa_get_part(struct flex_array *fa, int part_nr, gfp_t flags)
+{
+ struct flex_array_part *part = fa->parts[part_nr];
+ if (!part) {
+ /*
+ * This leaves the part pages uninitialized
+ * and with potentially random data, just
+ * as if the user had kmalloc()'d the whole.
+ * __GFP_ZERO can be used to zero it.
+ */
+ part = kmalloc(FLEX_ARRAY_PART_SIZE, flags);
+ if (!part)
+ return NULL;
+ fa->parts[part_nr] = part;
+ }
+ return part;
+}
+
+/**
+ * flex_array_put - copy data into the array at @element_nr
+ * @src: address of data to copy into the array
+ * @element_nr: index of the position in which to insert
+ * the new element.
+ *
+ * Note that this *copies* the contents of @src into
+ * the array. If you are trying to store an array of
+ * pointers, make sure to pass in &ptr instead of ptr.
+ *
+ * Locking must be provided by the caller.
+ */
+int flex_array_put(struct flex_array *fa, unsigned int element_nr, void *src,
+ gfp_t flags)
+{
+ int part_nr = fa_element_to_part_nr(fa, element_nr);
+ struct flex_array_part *part;
+ void *dst;
+
+ if (element_nr >= fa->total_nr_elements)
+ return -ENOSPC;
+ if (elements_fit_in_base(fa))
+ part = (struct flex_array_part *)&fa->parts[0];
+ else {
+ part = __fa_get_part(fa, part_nr, flags);
+ if (!part)
+ return -ENOMEM;
+ }
+ dst = &part->elements[index_inside_part(fa, element_nr)];
+ memcpy(dst, src, fa->element_size);
+ return 0;
+}
+
+/**
+ * flex_array_prealloc - guarantee that array space exists
+ * @start: index of first array element for which space is allocated
+ * @end: index of last (inclusive) element for which space is allocated
+ *
+ * This will guarantee that no future calls to flex_array_put()
+ * will allocate memory. It can be used if you are expecting to
+ * be holding a lock or in some atomic context while writing
+ * data into the array.
+ *
+ * Locking must be provided by the caller.
+ */
+int flex_array_prealloc(struct flex_array *fa, unsigned int start,
+ unsigned int end, gfp_t flags)
+{
+ int start_part;
+ int end_part;
+ int part_nr;
+ struct flex_array_part *part;
+
+ if (start >= fa->total_nr_elements || end >= fa->total_nr_elements)
+ return -ENOSPC;
+ if (elements_fit_in_base(fa))
+ return 0;
+ start_part = fa_element_to_part_nr(fa, start);
+ end_part = fa_element_to_part_nr(fa, end);
+ for (part_nr = start_part; part_nr <= end_part; part_nr++) {
+ part = __fa_get_part(fa, part_nr, flags);
+ if (!part)
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+/**
+ * flex_array_get - pull data back out of the array
+ * @element_nr: index of the element to fetch from the array
+ *
+ * Returns a pointer to the data at index @element_nr. Note
+ * that this is a copy of the data that was passed in. If you
+ * are using this to store pointers, you'll get back &ptr.
+ *
+ * Locking must be provided by the caller.
+ */
+void *flex_array_get(struct flex_array *fa, unsigned int element_nr)
+{
+ int part_nr = fa_element_to_part_nr(fa, element_nr);
+ struct flex_array_part *part;
+
+ if (element_nr >= fa->total_nr_elements)
+ return NULL;
+ if (elements_fit_in_base(fa))
+ part = (struct flex_array_part *)&fa->parts[0];
+ else {
+ part = fa->parts[part_nr];
+ if (!part)
+ return NULL;
+ }
+ return &part->elements[index_inside_part(fa, element_nr)];
+}
#include <linux/sched.h>
-/**
- * is_single_threaded - Determine if a thread group is single-threaded or not
- * @p: A task in the thread group in question
- *
- * This returns true if the thread group to which a task belongs is single
- * threaded, false if it is not.
+/*
+ * Returns true if the task does not share ->mm with another thread/process.
*/
-bool is_single_threaded(struct task_struct *p)
+bool current_is_single_threaded(void)
{
- struct task_struct *g, *t;
- struct mm_struct *mm = p->mm;
+ struct task_struct *task = current;
+ struct mm_struct *mm = task->mm;
+ struct task_struct *p, *t;
+ bool ret;
- if (atomic_read(&p->signal->count) != 1)
- goto no;
+ if (atomic_read(&task->signal->live) != 1)
+ return false;
- if (atomic_read(&p->mm->mm_users) != 1) {
- read_lock(&tasklist_lock);
- do_each_thread(g, t) {
- if (t->mm == mm && t != p)
- goto no_unlock;
- } while_each_thread(g, t);
- read_unlock(&tasklist_lock);
- }
+ if (atomic_read(&mm->mm_users) == 1)
+ return true;
- return true;
+ ret = false;
+ rcu_read_lock();
+ for_each_process(p) {
+ if (unlikely(p->flags & PF_KTHREAD))
+ continue;
+ if (unlikely(p == task->group_leader))
+ continue;
+
+ t = p;
+ do {
+ if (unlikely(t->mm == mm))
+ goto found;
+ if (likely(t->mm))
+ break;
+ /*
+ * t->mm == NULL. Make sure next_thread/next_task
+ * will see other CLONE_VM tasks which might be
+ * forked before exiting.
+ */
+ smp_rmb();
+ } while_each_thread(p, t);
+ }
+ ret = true;
+found:
+ rcu_read_unlock();
-no_unlock:
- read_unlock(&tasklist_lock);
-no:
- return false;
+ return ret;
}
return lmb.memory.size;
}
-u64 __init lmb_end_of_DRAM(void)
+u64 lmb_end_of_DRAM(void)
{
int idx = lmb.memory.cnt - 1;
miter->__sg = sgl;
miter->__nents = nents;
miter->__offset = 0;
+ WARN_ON(!(flags & (SG_MITER_TO_SG | SG_MITER_FROM_SG)));
miter->__flags = flags;
}
EXPORT_SYMBOL(sg_miter_start);
if (miter->addr) {
miter->__offset += miter->consumed;
+ if (miter->__flags & SG_MITER_TO_SG)
+ flush_kernel_dcache_page(miter->page);
+
if (miter->__flags & SG_MITER_ATOMIC) {
WARN_ON(!irqs_disabled());
kunmap_atomic(miter->addr, KM_BIO_SRC_IRQ);
unsigned int offset = 0;
struct sg_mapping_iter miter;
unsigned long flags;
+ unsigned int sg_flags = SG_MITER_ATOMIC;
+
+ if (to_buffer)
+ sg_flags |= SG_MITER_FROM_SG;
+ else
+ sg_flags |= SG_MITER_TO_SG;
- sg_miter_start(&miter, sgl, nents, SG_MITER_ATOMIC);
+ sg_miter_start(&miter, sgl, nents, sg_flags);
local_irq_save(flags);
if (to_buffer)
memcpy(buf + offset, miter.addr, len);
- else {
+ else
memcpy(miter.addr, buf + offset, len);
- flush_kernel_dcache_page(miter.page);
- }
offset += len;
}
__setup("swiotlb=", setup_io_tlb_npages);
/* make io_tlb_overflow tunable too? */
-void * __weak __init swiotlb_alloc_boot(size_t size, unsigned long nslabs)
-{
- return alloc_bootmem_low_pages(size);
-}
-
-void * __weak swiotlb_alloc(unsigned order, unsigned long nslabs)
-{
- return (void *)__get_free_pages(GFP_DMA | __GFP_NOWARN, order);
-}
-
-dma_addr_t __weak swiotlb_phys_to_bus(struct device *hwdev, phys_addr_t paddr)
-{
- return paddr;
-}
-
-phys_addr_t __weak swiotlb_bus_to_phys(struct device *hwdev, dma_addr_t baddr)
-{
- return baddr;
-}
-
+/* Note that this doesn't work with highmem page */
static dma_addr_t swiotlb_virt_to_bus(struct device *hwdev,
volatile void *address)
{
- return swiotlb_phys_to_bus(hwdev, virt_to_phys(address));
-}
-
-void * __weak swiotlb_bus_to_virt(struct device *hwdev, dma_addr_t address)
-{
- return phys_to_virt(swiotlb_bus_to_phys(hwdev, address));
-}
-
-int __weak swiotlb_arch_address_needs_mapping(struct device *hwdev,
- dma_addr_t addr, size_t size)
-{
- return !is_buffer_dma_capable(dma_get_mask(hwdev), addr, size);
-}
-
-int __weak swiotlb_arch_range_needs_mapping(phys_addr_t paddr, size_t size)
-{
- return 0;
+ return phys_to_dma(hwdev, virt_to_phys(address));
}
static void swiotlb_print_info(unsigned long bytes)
/*
* Get IO TLB memory from the low pages
*/
- io_tlb_start = swiotlb_alloc_boot(bytes, io_tlb_nslabs);
+ io_tlb_start = alloc_bootmem_low_pages(bytes);
if (!io_tlb_start)
panic("Cannot allocate SWIOTLB buffer");
io_tlb_end = io_tlb_start + bytes;
bytes = io_tlb_nslabs << IO_TLB_SHIFT;
while ((SLABS_PER_PAGE << order) > IO_TLB_MIN_SLABS) {
- io_tlb_start = swiotlb_alloc(order, io_tlb_nslabs);
+ io_tlb_start = (void *)__get_free_pages(GFP_DMA | __GFP_NOWARN,
+ order);
if (io_tlb_start)
break;
order--;
return -ENOMEM;
}
-static inline int
-address_needs_mapping(struct device *hwdev, dma_addr_t addr, size_t size)
+static int is_swiotlb_buffer(phys_addr_t paddr)
{
- return swiotlb_arch_address_needs_mapping(hwdev, addr, size);
-}
-
-static inline int range_needs_mapping(phys_addr_t paddr, size_t size)
-{
- return swiotlb_force || swiotlb_arch_range_needs_mapping(paddr, size);
-}
-
-static int is_swiotlb_buffer(char *addr)
-{
- return addr >= io_tlb_start && addr < io_tlb_end;
+ return paddr >= virt_to_phys(io_tlb_start) &&
+ paddr < virt_to_phys(io_tlb_end);
}
/*
dma_mask = hwdev->coherent_dma_mask;
ret = (void *)__get_free_pages(flags, order);
- if (ret &&
- !is_buffer_dma_capable(dma_mask, swiotlb_virt_to_bus(hwdev, ret),
- size)) {
+ if (ret && swiotlb_virt_to_bus(hwdev, ret) + size > dma_mask) {
/*
* The allocated memory isn't reachable by the device.
*/
dev_addr = swiotlb_virt_to_bus(hwdev, ret);
/* Confirm address can be DMA'd by device */
- if (!is_buffer_dma_capable(dma_mask, dev_addr, size)) {
+ if (dev_addr + size > dma_mask) {
printk("hwdev DMA mask = 0x%016Lx, dev_addr = 0x%016Lx\n",
(unsigned long long)dma_mask,
(unsigned long long)dev_addr);
void
swiotlb_free_coherent(struct device *hwdev, size_t size, void *vaddr,
- dma_addr_t dma_handle)
+ dma_addr_t dev_addr)
{
+ phys_addr_t paddr = dma_to_phys(hwdev, dev_addr);
+
WARN_ON(irqs_disabled());
- if (!is_swiotlb_buffer(vaddr))
- free_pages((unsigned long) vaddr, get_order(size));
+ if (!is_swiotlb_buffer(paddr))
+ free_pages((unsigned long)vaddr, get_order(size));
else
/* DMA_TO_DEVICE to avoid memcpy in unmap_single */
do_unmap_single(hwdev, vaddr, size, DMA_TO_DEVICE);
printk(KERN_ERR "DMA: Out of SW-IOMMU space for %zu bytes at "
"device %s\n", size, dev ? dev_name(dev) : "?");
- if (size > io_tlb_overflow && do_panic) {
- if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL)
- panic("DMA: Memory would be corrupted\n");
- if (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL)
- panic("DMA: Random memory would be DMAed\n");
- }
+ if (size <= io_tlb_overflow || !do_panic)
+ return;
+
+ if (dir == DMA_BIDIRECTIONAL)
+ panic("DMA: Random memory could be DMA accessed\n");
+ if (dir == DMA_FROM_DEVICE)
+ panic("DMA: Random memory could be DMA written\n");
+ if (dir == DMA_TO_DEVICE)
+ panic("DMA: Random memory could be DMA read\n");
}
/*
struct dma_attrs *attrs)
{
phys_addr_t phys = page_to_phys(page) + offset;
- dma_addr_t dev_addr = swiotlb_phys_to_bus(dev, phys);
+ dma_addr_t dev_addr = phys_to_dma(dev, phys);
void *map;
BUG_ON(dir == DMA_NONE);
* we can safely return the device addr and not worry about bounce
* buffering it.
*/
- if (!address_needs_mapping(dev, dev_addr, size) &&
- !range_needs_mapping(phys, size))
+ if (dma_capable(dev, dev_addr, size) && !swiotlb_force)
return dev_addr;
/*
/*
* Ensure that the address returned is DMA'ble
*/
- if (address_needs_mapping(dev, dev_addr, size))
+ if (!dma_capable(dev, dev_addr, size))
panic("map_single: bounce buffer is not DMA'ble");
return dev_addr;
static void unmap_single(struct device *hwdev, dma_addr_t dev_addr,
size_t size, int dir)
{
- char *dma_addr = swiotlb_bus_to_virt(hwdev, dev_addr);
+ phys_addr_t paddr = dma_to_phys(hwdev, dev_addr);
BUG_ON(dir == DMA_NONE);
- if (is_swiotlb_buffer(dma_addr)) {
- do_unmap_single(hwdev, dma_addr, size, dir);
+ if (is_swiotlb_buffer(paddr)) {
+ do_unmap_single(hwdev, phys_to_virt(paddr), size, dir);
return;
}
if (dir != DMA_FROM_DEVICE)
return;
- dma_mark_clean(dma_addr, size);
+ /*
+ * phys_to_virt doesn't work with hihgmem page but we could
+ * call dma_mark_clean() with hihgmem page here. However, we
+ * are fine since dma_mark_clean() is null on POWERPC. We can
+ * make dma_mark_clean() take a physical address if necessary.
+ */
+ dma_mark_clean(phys_to_virt(paddr), size);
}
void swiotlb_unmap_page(struct device *hwdev, dma_addr_t dev_addr,
swiotlb_sync_single(struct device *hwdev, dma_addr_t dev_addr,
size_t size, int dir, int target)
{
- char *dma_addr = swiotlb_bus_to_virt(hwdev, dev_addr);
+ phys_addr_t paddr = dma_to_phys(hwdev, dev_addr);
BUG_ON(dir == DMA_NONE);
- if (is_swiotlb_buffer(dma_addr)) {
- sync_single(hwdev, dma_addr, size, dir, target);
+ if (is_swiotlb_buffer(paddr)) {
+ sync_single(hwdev, phys_to_virt(paddr), size, dir, target);
return;
}
if (dir != DMA_FROM_DEVICE)
return;
- dma_mark_clean(dma_addr, size);
+ dma_mark_clean(phys_to_virt(paddr), size);
}
void
for_each_sg(sgl, sg, nelems, i) {
phys_addr_t paddr = sg_phys(sg);
- dma_addr_t dev_addr = swiotlb_phys_to_bus(hwdev, paddr);
+ dma_addr_t dev_addr = phys_to_dma(hwdev, paddr);
- if (range_needs_mapping(paddr, sg->length) ||
- address_needs_mapping(hwdev, dev_addr, sg->length)) {
+ if (swiotlb_force ||
+ !dma_capable(hwdev, dev_addr, sg->length)) {
void *map = map_single(hwdev, sg_phys(sg),
sg->length, dir);
if (!map) {
For most ia64, ppc64 and x86 users with lots of address space
a value of 65536 is reasonable and should cause no problems.
On arm and other archs it should not be higher than 32768.
- Programs which use vm86 functionality would either need additional
- permissions from either the LSM or the capabilities module or have
- this protection disabled.
+ Programs which use vm86 functionality or have some need to map
+ this low address space will need CAP_SYS_RAWIO or disable this
+ protection by setting the value to 0.
This value can be changed after boot using the
/proc/sys/vm/mmap_min_addr tunable.
vmalloc.o
obj-y := bootmem.o filemap.o mempool.o oom_kill.o fadvise.o \
- maccess.o page_alloc.o page-writeback.o pdflush.o \
+ maccess.o page_alloc.o page-writeback.o \
readahead.o swap.o truncate.o vmscan.o shmem.o \
prio_tree.o util.o mmzone.o vmstat.o backing-dev.o \
page_isolation.o mm_init.o $(mmu-y)
#include <linux/wait.h>
#include <linux/backing-dev.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
#include <linux/fs.h>
#include <linux/pagemap.h>
+#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/module.h>
#include <linux/writeback.h>
EXPORT_SYMBOL(default_unplug_io_fn);
struct backing_dev_info default_backing_dev_info = {
+ .name = "default",
.ra_pages = VM_MAX_READAHEAD * 1024 / PAGE_CACHE_SIZE,
.state = 0,
.capabilities = BDI_CAP_MAP_COPY,
EXPORT_SYMBOL_GPL(default_backing_dev_info);
static struct class *bdi_class;
+DEFINE_SPINLOCK(bdi_lock);
+LIST_HEAD(bdi_list);
+LIST_HEAD(bdi_pending_list);
+
+static struct task_struct *sync_supers_tsk;
+static struct timer_list sync_supers_timer;
+
+static int bdi_sync_supers(void *);
+static void sync_supers_timer_fn(unsigned long);
+static void arm_supers_timer(void);
+
+static void bdi_add_default_flusher_task(struct backing_dev_info *bdi);
#ifdef CONFIG_DEBUG_FS
#include <linux/debugfs.h>
static int bdi_debug_stats_show(struct seq_file *m, void *v)
{
struct backing_dev_info *bdi = m->private;
+ struct bdi_writeback *wb;
unsigned long background_thresh;
unsigned long dirty_thresh;
unsigned long bdi_thresh;
+ unsigned long nr_dirty, nr_io, nr_more_io, nr_wb;
+ struct inode *inode;
+
+ /*
+ * inode lock is enough here, the bdi->wb_list is protected by
+ * RCU on the reader side
+ */
+ nr_wb = nr_dirty = nr_io = nr_more_io = 0;
+ spin_lock(&inode_lock);
+ list_for_each_entry(wb, &bdi->wb_list, list) {
+ nr_wb++;
+ list_for_each_entry(inode, &wb->b_dirty, i_list)
+ nr_dirty++;
+ list_for_each_entry(inode, &wb->b_io, i_list)
+ nr_io++;
+ list_for_each_entry(inode, &wb->b_more_io, i_list)
+ nr_more_io++;
+ }
+ spin_unlock(&inode_lock);
get_dirty_limits(&background_thresh, &dirty_thresh, &bdi_thresh, bdi);
"BdiReclaimable: %8lu kB\n"
"BdiDirtyThresh: %8lu kB\n"
"DirtyThresh: %8lu kB\n"
- "BackgroundThresh: %8lu kB\n",
+ "BackgroundThresh: %8lu kB\n"
+ "WriteBack threads:%8lu\n"
+ "b_dirty: %8lu\n"
+ "b_io: %8lu\n"
+ "b_more_io: %8lu\n"
+ "bdi_list: %8u\n"
+ "state: %8lx\n"
+ "wb_mask: %8lx\n"
+ "wb_list: %8u\n"
+ "wb_cnt: %8u\n",
(unsigned long) K(bdi_stat(bdi, BDI_WRITEBACK)),
(unsigned long) K(bdi_stat(bdi, BDI_RECLAIMABLE)),
- K(bdi_thresh),
- K(dirty_thresh),
- K(background_thresh));
+ K(bdi_thresh), K(dirty_thresh),
+ K(background_thresh), nr_wb, nr_dirty, nr_io, nr_more_io,
+ !list_empty(&bdi->bdi_list), bdi->state, bdi->wb_mask,
+ !list_empty(&bdi->wb_list), bdi->wb_cnt);
#undef K
return 0;
{
int err;
+ sync_supers_tsk = kthread_run(bdi_sync_supers, NULL, "sync_supers");
+ BUG_ON(IS_ERR(sync_supers_tsk));
+
+ init_timer(&sync_supers_timer);
+ setup_timer(&sync_supers_timer, sync_supers_timer_fn, 0);
+ arm_supers_timer();
+
err = bdi_init(&default_backing_dev_info);
if (!err)
bdi_register(&default_backing_dev_info, NULL, "default");
}
subsys_initcall(default_bdi_init);
+static void bdi_wb_init(struct bdi_writeback *wb, struct backing_dev_info *bdi)
+{
+ memset(wb, 0, sizeof(*wb));
+
+ wb->bdi = bdi;
+ wb->last_old_flush = jiffies;
+ INIT_LIST_HEAD(&wb->b_dirty);
+ INIT_LIST_HEAD(&wb->b_io);
+ INIT_LIST_HEAD(&wb->b_more_io);
+}
+
+static void bdi_task_init(struct backing_dev_info *bdi,
+ struct bdi_writeback *wb)
+{
+ struct task_struct *tsk = current;
+
+ spin_lock(&bdi->wb_lock);
+ list_add_tail_rcu(&wb->list, &bdi->wb_list);
+ spin_unlock(&bdi->wb_lock);
+
+ tsk->flags |= PF_FLUSHER | PF_SWAPWRITE;
+ set_freezable();
+
+ /*
+ * Our parent may run at a different priority, just set us to normal
+ */
+ set_user_nice(tsk, 0);
+}
+
+static int bdi_start_fn(void *ptr)
+{
+ struct bdi_writeback *wb = ptr;
+ struct backing_dev_info *bdi = wb->bdi;
+ int ret;
+
+ /*
+ * Add us to the active bdi_list
+ */
+ spin_lock(&bdi_lock);
+ list_add(&bdi->bdi_list, &bdi_list);
+ spin_unlock(&bdi_lock);
+
+ bdi_task_init(bdi, wb);
+
+ /*
+ * Clear pending bit and wakeup anybody waiting to tear us down
+ */
+ clear_bit(BDI_pending, &bdi->state);
+ smp_mb__after_clear_bit();
+ wake_up_bit(&bdi->state, BDI_pending);
+
+ ret = bdi_writeback_task(wb);
+
+ /*
+ * Remove us from the list
+ */
+ spin_lock(&bdi->wb_lock);
+ list_del_rcu(&wb->list);
+ spin_unlock(&bdi->wb_lock);
+
+ /*
+ * Flush any work that raced with us exiting. No new work
+ * will be added, since this bdi isn't discoverable anymore.
+ */
+ if (!list_empty(&bdi->work_list))
+ wb_do_writeback(wb, 1);
+
+ wb->task = NULL;
+ return ret;
+}
+
+int bdi_has_dirty_io(struct backing_dev_info *bdi)
+{
+ return wb_has_dirty_io(&bdi->wb);
+}
+
+static void bdi_flush_io(struct backing_dev_info *bdi)
+{
+ struct writeback_control wbc = {
+ .bdi = bdi,
+ .sync_mode = WB_SYNC_NONE,
+ .older_than_this = NULL,
+ .range_cyclic = 1,
+ .nr_to_write = 1024,
+ };
+
+ writeback_inodes_wbc(&wbc);
+}
+
+/*
+ * kupdated() used to do this. We cannot do it from the bdi_forker_task()
+ * or we risk deadlocking on ->s_umount. The longer term solution would be
+ * to implement sync_supers_bdi() or similar and simply do it from the
+ * bdi writeback tasks individually.
+ */
+static int bdi_sync_supers(void *unused)
+{
+ set_user_nice(current, 0);
+
+ while (!kthread_should_stop()) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule();
+
+ /*
+ * Do this periodically, like kupdated() did before.
+ */
+ sync_supers();
+ }
+
+ return 0;
+}
+
+static void arm_supers_timer(void)
+{
+ unsigned long next;
+
+ next = msecs_to_jiffies(dirty_writeback_interval * 10) + jiffies;
+ mod_timer(&sync_supers_timer, round_jiffies_up(next));
+}
+
+static void sync_supers_timer_fn(unsigned long unused)
+{
+ wake_up_process(sync_supers_tsk);
+ arm_supers_timer();
+}
+
+static int bdi_forker_task(void *ptr)
+{
+ struct bdi_writeback *me = ptr;
+
+ bdi_task_init(me->bdi, me);
+
+ for (;;) {
+ struct backing_dev_info *bdi, *tmp;
+ struct bdi_writeback *wb;
+
+ /*
+ * Temporary measure, we want to make sure we don't see
+ * dirty data on the default backing_dev_info
+ */
+ if (wb_has_dirty_io(me) || !list_empty(&me->bdi->work_list))
+ wb_do_writeback(me, 0);
+
+ spin_lock(&bdi_lock);
+
+ /*
+ * Check if any existing bdi's have dirty data without
+ * a thread registered. If so, set that up.
+ */
+ list_for_each_entry_safe(bdi, tmp, &bdi_list, bdi_list) {
+ if (bdi->wb.task)
+ continue;
+ if (list_empty(&bdi->work_list) &&
+ !bdi_has_dirty_io(bdi))
+ continue;
+
+ bdi_add_default_flusher_task(bdi);
+ }
+
+ set_current_state(TASK_INTERRUPTIBLE);
+
+ if (list_empty(&bdi_pending_list)) {
+ unsigned long wait;
+
+ spin_unlock(&bdi_lock);
+ wait = msecs_to_jiffies(dirty_writeback_interval * 10);
+ schedule_timeout(wait);
+ try_to_freeze();
+ continue;
+ }
+
+ __set_current_state(TASK_RUNNING);
+
+ /*
+ * This is our real job - check for pending entries in
+ * bdi_pending_list, and create the tasks that got added
+ */
+ bdi = list_entry(bdi_pending_list.next, struct backing_dev_info,
+ bdi_list);
+ list_del_init(&bdi->bdi_list);
+ spin_unlock(&bdi_lock);
+
+ wb = &bdi->wb;
+ wb->task = kthread_run(bdi_start_fn, wb, "flush-%s",
+ dev_name(bdi->dev));
+ /*
+ * If task creation fails, then readd the bdi to
+ * the pending list and force writeout of the bdi
+ * from this forker thread. That will free some memory
+ * and we can try again.
+ */
+ if (IS_ERR(wb->task)) {
+ wb->task = NULL;
+
+ /*
+ * Add this 'bdi' to the back, so we get
+ * a chance to flush other bdi's to free
+ * memory.
+ */
+ spin_lock(&bdi_lock);
+ list_add_tail(&bdi->bdi_list, &bdi_pending_list);
+ spin_unlock(&bdi_lock);
+
+ bdi_flush_io(bdi);
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Add the default flusher task that gets created for any bdi
+ * that has dirty data pending writeout
+ */
+void static bdi_add_default_flusher_task(struct backing_dev_info *bdi)
+{
+ if (!bdi_cap_writeback_dirty(bdi))
+ return;
+
+ if (WARN_ON(!test_bit(BDI_registered, &bdi->state))) {
+ printk(KERN_ERR "bdi %p/%s is not registered!\n",
+ bdi, bdi->name);
+ return;
+ }
+
+ /*
+ * Check with the helper whether to proceed adding a task. Will only
+ * abort if we two or more simultanous calls to
+ * bdi_add_default_flusher_task() occured, further additions will block
+ * waiting for previous additions to finish.
+ */
+ if (!test_and_set_bit(BDI_pending, &bdi->state)) {
+ list_move_tail(&bdi->bdi_list, &bdi_pending_list);
+
+ /*
+ * We are now on the pending list, wake up bdi_forker_task()
+ * to finish the job and add us back to the active bdi_list
+ */
+ wake_up_process(default_backing_dev_info.wb.task);
+ }
+}
+
int bdi_register(struct backing_dev_info *bdi, struct device *parent,
const char *fmt, ...)
{
goto exit;
}
+ spin_lock(&bdi_lock);
+ list_add_tail(&bdi->bdi_list, &bdi_list);
+ spin_unlock(&bdi_lock);
+
bdi->dev = dev;
- bdi_debug_register(bdi, dev_name(dev));
+ /*
+ * Just start the forker thread for our default backing_dev_info,
+ * and add other bdi's to the list. They will get a thread created
+ * on-demand when they need it.
+ */
+ if (bdi_cap_flush_forker(bdi)) {
+ struct bdi_writeback *wb = &bdi->wb;
+
+ wb->task = kthread_run(bdi_forker_task, wb, "bdi-%s",
+ dev_name(dev));
+ if (IS_ERR(wb->task)) {
+ wb->task = NULL;
+ ret = -ENOMEM;
+
+ spin_lock(&bdi_lock);
+ list_del(&bdi->bdi_list);
+ spin_unlock(&bdi_lock);
+ goto exit;
+ }
+ }
+
+ bdi_debug_register(bdi, dev_name(dev));
+ set_bit(BDI_registered, &bdi->state);
exit:
return ret;
}
}
EXPORT_SYMBOL(bdi_register_dev);
+/*
+ * Remove bdi from the global list and shutdown any threads we have running
+ */
+static void bdi_wb_shutdown(struct backing_dev_info *bdi)
+{
+ struct bdi_writeback *wb;
+
+ if (!bdi_cap_writeback_dirty(bdi))
+ return;
+
+ /*
+ * If setup is pending, wait for that to complete first
+ */
+ wait_on_bit(&bdi->state, BDI_pending, bdi_sched_wait,
+ TASK_UNINTERRUPTIBLE);
+
+ /*
+ * Make sure nobody finds us on the bdi_list anymore
+ */
+ spin_lock(&bdi_lock);
+ list_del(&bdi->bdi_list);
+ spin_unlock(&bdi_lock);
+
+ /*
+ * Finally, kill the kernel threads. We don't need to be RCU
+ * safe anymore, since the bdi is gone from visibility.
+ */
+ list_for_each_entry(wb, &bdi->wb_list, list)
+ kthread_stop(wb->task);
+}
+
void bdi_unregister(struct backing_dev_info *bdi)
{
if (bdi->dev) {
+ if (!bdi_cap_flush_forker(bdi))
+ bdi_wb_shutdown(bdi);
bdi_debug_unregister(bdi);
device_unregister(bdi->dev);
bdi->dev = NULL;
int bdi_init(struct backing_dev_info *bdi)
{
- int i;
- int err;
+ int i, err;
bdi->dev = NULL;
bdi->min_ratio = 0;
bdi->max_ratio = 100;
bdi->max_prop_frac = PROP_FRAC_BASE;
+ spin_lock_init(&bdi->wb_lock);
+ INIT_LIST_HEAD(&bdi->bdi_list);
+ INIT_LIST_HEAD(&bdi->wb_list);
+ INIT_LIST_HEAD(&bdi->work_list);
+
+ bdi_wb_init(&bdi->wb, bdi);
+
+ /*
+ * Just one thread support for now, hard code mask and count
+ */
+ bdi->wb_mask = 1;
+ bdi->wb_cnt = 1;
for (i = 0; i < NR_BDI_STAT_ITEMS; i++) {
err = percpu_counter_init(&bdi->bdi_stat[i], 0);
{
int i;
+ WARN_ON(bdi_has_dirty_io(bdi));
+
bdi_unregister(bdi);
for (i = 0; i < NR_BDI_STAT_ITEMS; i++)
region = phys_to_virt(PFN_PHYS(bdata->node_min_pfn) +
start_off);
memset(region, 0, size);
- kmemleak_alloc(region, size, 1, 0);
+ /*
+ * The min_count is set to 0 so that bootmem allocated blocks
+ * are never reported as leaks.
+ */
+ kmemleak_alloc(region, size, 0, 0);
return region;
}
long chg = region_truncate(&inode->i_mapping->private_list, offset);
spin_lock(&inode->i_lock);
- inode->i_blocks -= blocks_per_huge_page(h);
+ inode->i_blocks -= (blocks_per_huge_page(h) * freed);
spin_unlock(&inode->i_lock);
hugetlb_put_quota(inode->i_mapping, (chg - freed));
#include <linux/string.h>
#include <linux/nodemask.h>
#include <linux/mm.h>
+#include <linux/workqueue.h>
#include <asm/sections.h>
#include <asm/processor.h>
#include <asm/atomic.h>
+#include <linux/kmemcheck.h>
#include <linux/kmemleak.h>
/*
#define SECS_FIRST_SCAN 60 /* delay before the first scan */
#define SECS_SCAN_WAIT 600 /* subsequent auto scanning delay */
#define GRAY_LIST_PASSES 25 /* maximum number of gray list scans */
+#define MAX_SCAN_SIZE 4096 /* maximum size of a scanned block */
#define BYTES_PER_POINTER sizeof(void *)
size_t length;
};
+#define KMEMLEAK_GREY 0
+#define KMEMLEAK_BLACK -1
+
/*
* Structure holding the metadata for each allocated memory block.
* Modifications to such objects should be made while holding the
/* flag set on newly allocated objects */
#define OBJECT_NEW (1 << 3)
+/* number of bytes to print per line; must be 16 or 32 */
+#define HEX_ROW_SIZE 16
+/* number of bytes to print at a time (1, 2, 4, 8) */
+#define HEX_GROUP_SIZE 1
+/* include ASCII after the hex output */
+#define HEX_ASCII 1
+/* max number of lines to be printed */
+#define HEX_MAX_LINES 2
+
/* the list of all allocated objects */
static LIST_HEAD(object_list);
/* the list of gray-colored objects (see color_gray comment below) */
int min_count; /* minimum reference count */
unsigned long offset; /* scan area offset */
size_t length; /* scan area length */
+ unsigned long trace[MAX_TRACE]; /* stack trace */
+ unsigned int trace_len; /* stack trace length */
};
/* early logging buffer and current position */
-static struct early_log early_log[CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE];
-static int crt_early_log;
+static struct early_log
+ early_log[CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE] __initdata;
+static int crt_early_log __initdata;
static void kmemleak_disable(void);
kmemleak_disable(); \
} while (0)
+/*
+ * Printing of the objects hex dump to the seq file. The number of lines to be
+ * printed is limited to HEX_MAX_LINES to prevent seq file spamming. The
+ * actual number of printed bytes depends on HEX_ROW_SIZE. It must be called
+ * with the object->lock held.
+ */
+static void hex_dump_object(struct seq_file *seq,
+ struct kmemleak_object *object)
+{
+ const u8 *ptr = (const u8 *)object->pointer;
+ int i, len, remaining;
+ unsigned char linebuf[HEX_ROW_SIZE * 5];
+
+ /* limit the number of lines to HEX_MAX_LINES */
+ remaining = len =
+ min(object->size, (size_t)(HEX_MAX_LINES * HEX_ROW_SIZE));
+
+ seq_printf(seq, " hex dump (first %d bytes):\n", len);
+ for (i = 0; i < len; i += HEX_ROW_SIZE) {
+ int linelen = min(remaining, HEX_ROW_SIZE);
+
+ remaining -= HEX_ROW_SIZE;
+ hex_dump_to_buffer(ptr + i, linelen, HEX_ROW_SIZE,
+ HEX_GROUP_SIZE, linebuf, sizeof(linebuf),
+ HEX_ASCII);
+ seq_printf(seq, " %s\n", linebuf);
+ }
+}
+
/*
* Object colors, encoded with count and min_count:
* - white - orphan object, not enough references to it (count < min_count)
* Newly created objects don't have any color assigned (object->count == -1)
* before the next memory scan when they become white.
*/
-static int color_white(const struct kmemleak_object *object)
+static bool color_white(const struct kmemleak_object *object)
{
- return object->count != -1 && object->count < object->min_count;
+ return object->count != KMEMLEAK_BLACK &&
+ object->count < object->min_count;
}
-static int color_gray(const struct kmemleak_object *object)
+static bool color_gray(const struct kmemleak_object *object)
{
- return object->min_count != -1 && object->count >= object->min_count;
+ return object->min_count != KMEMLEAK_BLACK &&
+ object->count >= object->min_count;
}
-static int color_black(const struct kmemleak_object *object)
+static bool color_black(const struct kmemleak_object *object)
{
- return object->min_count == -1;
+ return object->min_count == KMEMLEAK_BLACK;
}
/*
* not be deleted and have a minimum age to avoid false positives caused by
* pointers temporarily stored in CPU registers.
*/
-static int unreferenced_object(struct kmemleak_object *object)
+static bool unreferenced_object(struct kmemleak_object *object)
{
return (object->flags & OBJECT_ALLOCATED) && color_white(object) &&
time_before_eq(object->jiffies + jiffies_min_age,
object->pointer, object->size);
seq_printf(seq, " comm \"%s\", pid %d, jiffies %lu\n",
object->comm, object->pid, object->jiffies);
+ hex_dump_object(seq, object);
seq_printf(seq, " backtrace:\n");
for (i = 0; i < object->trace_len; i++) {
object->comm, object->pid, object->jiffies);
pr_notice(" min_count = %d\n", object->min_count);
pr_notice(" count = %d\n", object->count);
+ pr_notice(" flags = 0x%lx\n", object->flags);
pr_notice(" backtrace:\n");
print_stack_trace(&trace, 4);
}
return object;
}
+/*
+ * Save stack trace to the given array of MAX_TRACE size.
+ */
+static int __save_stack_trace(unsigned long *trace)
+{
+ struct stack_trace stack_trace;
+
+ stack_trace.max_entries = MAX_TRACE;
+ stack_trace.nr_entries = 0;
+ stack_trace.entries = trace;
+ stack_trace.skip = 2;
+ save_stack_trace(&stack_trace);
+
+ return stack_trace.nr_entries;
+}
+
/*
* Create the metadata (struct kmemleak_object) corresponding to an allocated
* memory block and add it to the object_list and object_tree_root.
*/
-static void create_object(unsigned long ptr, size_t size, int min_count,
- gfp_t gfp)
+static struct kmemleak_object *create_object(unsigned long ptr, size_t size,
+ int min_count, gfp_t gfp)
{
unsigned long flags;
struct kmemleak_object *object;
struct prio_tree_node *node;
- struct stack_trace trace;
object = kmem_cache_alloc(object_cache, gfp & GFP_KMEMLEAK_MASK);
if (!object) {
kmemleak_stop("Cannot allocate a kmemleak_object structure\n");
- return;
+ return NULL;
}
INIT_LIST_HEAD(&object->object_list);
}
/* kernel backtrace */
- trace.max_entries = MAX_TRACE;
- trace.nr_entries = 0;
- trace.entries = object->trace;
- trace.skip = 1;
- save_stack_trace(&trace);
- object->trace_len = trace.nr_entries;
+ object->trace_len = __save_stack_trace(object->trace);
INIT_PRIO_TREE_NODE(&object->tree_node);
object->tree_node.start = ptr;
object->tree_node.last = ptr + size - 1;
write_lock_irqsave(&kmemleak_lock, flags);
+
min_addr = min(min_addr, ptr);
max_addr = max(max_addr, ptr + size);
node = prio_tree_insert(&object_tree_root, &object->tree_node);
* random memory blocks.
*/
if (node != &object->tree_node) {
- unsigned long flags;
-
kmemleak_stop("Cannot insert 0x%lx into the object search tree "
"(already existing)\n", ptr);
object = lookup_object(ptr, 1);
- spin_lock_irqsave(&object->lock, flags);
+ spin_lock(&object->lock);
dump_object_info(object);
- spin_unlock_irqrestore(&object->lock, flags);
+ spin_unlock(&object->lock);
goto out;
}
list_add_tail_rcu(&object->object_list, &object_list);
out:
write_unlock_irqrestore(&kmemleak_lock, flags);
+ return object;
}
/*
put_object(object);
}
-/*
- * Make a object permanently as gray-colored so that it can no longer be
- * reported as a leak. This is used in general to mark a false positive.
- */
-static void make_gray_object(unsigned long ptr)
+
+static void __paint_it(struct kmemleak_object *object, int color)
+{
+ object->min_count = color;
+ if (color == KMEMLEAK_BLACK)
+ object->flags |= OBJECT_NO_SCAN;
+}
+
+static void paint_it(struct kmemleak_object *object, int color)
{
unsigned long flags;
+
+ spin_lock_irqsave(&object->lock, flags);
+ __paint_it(object, color);
+ spin_unlock_irqrestore(&object->lock, flags);
+}
+
+static void paint_ptr(unsigned long ptr, int color)
+{
struct kmemleak_object *object;
object = find_and_get_object(ptr, 0);
if (!object) {
- kmemleak_warn("Graying unknown object at 0x%08lx\n", ptr);
+ kmemleak_warn("Trying to color unknown object "
+ "at 0x%08lx as %s\n", ptr,
+ (color == KMEMLEAK_GREY) ? "Grey" :
+ (color == KMEMLEAK_BLACK) ? "Black" : "Unknown");
return;
}
-
- spin_lock_irqsave(&object->lock, flags);
- object->min_count = 0;
- spin_unlock_irqrestore(&object->lock, flags);
+ paint_it(object, color);
put_object(object);
}
+/*
+ * Make a object permanently as gray-colored so that it can no longer be
+ * reported as a leak. This is used in general to mark a false positive.
+ */
+static void make_gray_object(unsigned long ptr)
+{
+ paint_ptr(ptr, KMEMLEAK_GREY);
+}
+
/*
* Mark the object as black-colored so that it is ignored from scans and
* reporting.
*/
static void make_black_object(unsigned long ptr)
{
- unsigned long flags;
- struct kmemleak_object *object;
-
- object = find_and_get_object(ptr, 0);
- if (!object) {
- kmemleak_warn("Blacking unknown object at 0x%08lx\n", ptr);
- return;
- }
-
- spin_lock_irqsave(&object->lock, flags);
- object->min_count = -1;
- spin_unlock_irqrestore(&object->lock, flags);
- put_object(object);
+ paint_ptr(ptr, KMEMLEAK_BLACK);
}
/*
* Log an early kmemleak_* call to the early_log buffer. These calls will be
* processed later once kmemleak is fully initialized.
*/
-static void log_early(int op_type, const void *ptr, size_t size,
- int min_count, unsigned long offset, size_t length)
+static void __init log_early(int op_type, const void *ptr, size_t size,
+ int min_count, unsigned long offset, size_t length)
{
unsigned long flags;
struct early_log *log;
if (crt_early_log >= ARRAY_SIZE(early_log)) {
- pr_warning("Early log buffer exceeded\n");
+ pr_warning("Early log buffer exceeded, "
+ "please increase DEBUG_KMEMLEAK_EARLY_LOG_SIZE\n");
kmemleak_disable();
return;
}
log->min_count = min_count;
log->offset = offset;
log->length = length;
+ if (op_type == KMEMLEAK_ALLOC)
+ log->trace_len = __save_stack_trace(log->trace);
crt_early_log++;
local_irq_restore(flags);
}
+/*
+ * Log an early allocated block and populate the stack trace.
+ */
+static void early_alloc(struct early_log *log)
+{
+ struct kmemleak_object *object;
+ unsigned long flags;
+ int i;
+
+ if (!atomic_read(&kmemleak_enabled) || !log->ptr || IS_ERR(log->ptr))
+ return;
+
+ /*
+ * RCU locking needed to ensure object is not freed via put_object().
+ */
+ rcu_read_lock();
+ object = create_object((unsigned long)log->ptr, log->size,
+ log->min_count, GFP_KERNEL);
+ spin_lock_irqsave(&object->lock, flags);
+ for (i = 0; i < log->trace_len; i++)
+ object->trace[i] = log->trace[i];
+ object->trace_len = log->trace_len;
+ spin_unlock_irqrestore(&object->lock, flags);
+ rcu_read_unlock();
+}
+
/*
* Memory allocation function callback. This function is called from the
* kernel allocators when a new block is allocated (kmem_cache_alloc, kmalloc,
* vmalloc etc.).
*/
-void kmemleak_alloc(const void *ptr, size_t size, int min_count, gfp_t gfp)
+void __ref kmemleak_alloc(const void *ptr, size_t size, int min_count,
+ gfp_t gfp)
{
pr_debug("%s(0x%p, %zu, %d)\n", __func__, ptr, size, min_count);
* Memory freeing function callback. This function is called from the kernel
* allocators when a block is freed (kmem_cache_free, kfree, vfree etc.).
*/
-void kmemleak_free(const void *ptr)
+void __ref kmemleak_free(const void *ptr)
{
pr_debug("%s(0x%p)\n", __func__, ptr);
* Partial memory freeing function callback. This function is usually called
* from bootmem allocator when (part of) a memory block is freed.
*/
-void kmemleak_free_part(const void *ptr, size_t size)
+void __ref kmemleak_free_part(const void *ptr, size_t size)
{
pr_debug("%s(0x%p)\n", __func__, ptr);
* Mark an already allocated memory block as a false positive. This will cause
* the block to no longer be reported as leak and always be scanned.
*/
-void kmemleak_not_leak(const void *ptr)
+void __ref kmemleak_not_leak(const void *ptr)
{
pr_debug("%s(0x%p)\n", __func__, ptr);
* corresponding block is not a leak and does not contain any references to
* other allocated memory blocks.
*/
-void kmemleak_ignore(const void *ptr)
+void __ref kmemleak_ignore(const void *ptr)
{
pr_debug("%s(0x%p)\n", __func__, ptr);
/*
* Limit the range to be scanned in an allocated memory block.
*/
-void kmemleak_scan_area(const void *ptr, unsigned long offset, size_t length,
- gfp_t gfp)
+void __ref kmemleak_scan_area(const void *ptr, unsigned long offset,
+ size_t length, gfp_t gfp)
{
pr_debug("%s(0x%p)\n", __func__, ptr);
/*
* Inform kmemleak not to scan the given memory block.
*/
-void kmemleak_no_scan(const void *ptr)
+void __ref kmemleak_no_scan(const void *ptr)
{
pr_debug("%s(0x%p)\n", __func__, ptr);
unsigned long *end = _end - (BYTES_PER_POINTER - 1);
for (ptr = start; ptr < end; ptr++) {
- unsigned long flags;
- unsigned long pointer = *ptr;
struct kmemleak_object *object;
+ unsigned long flags;
+ unsigned long pointer;
if (allow_resched)
cond_resched();
if (scan_should_stop())
break;
+ /* don't scan uninitialized memory */
+ if (!kmemcheck_is_obj_initialized((unsigned long)ptr,
+ BYTES_PER_POINTER))
+ continue;
+
+ pointer = *ptr;
+
object = find_and_get_object(pointer, 1);
if (!object)
continue;
if (!(object->flags & OBJECT_ALLOCATED))
/* already freed object */
goto out;
- if (hlist_empty(&object->area_list))
- scan_block((void *)object->pointer,
- (void *)(object->pointer + object->size), object, 0);
- else
+ if (hlist_empty(&object->area_list)) {
+ void *start = (void *)object->pointer;
+ void *end = (void *)(object->pointer + object->size);
+
+ while (start < end && (object->flags & OBJECT_ALLOCATED) &&
+ !(object->flags & OBJECT_NO_SCAN)) {
+ scan_block(start, min(start + MAX_SCAN_SIZE, end),
+ object, 0);
+ start += MAX_SCAN_SIZE;
+
+ spin_unlock_irqrestore(&object->lock, flags);
+ cond_resched();
+ spin_lock_irqsave(&object->lock, flags);
+ }
+ } else
hlist_for_each_entry(area, elem, &object->area_list, node)
scan_block((void *)(object->pointer + area->offset),
(void *)(object->pointer + area->offset
{
unsigned long flags;
struct kmemleak_object *object, *tmp;
- struct task_struct *task;
int i;
int new_leaks = 0;
int gray_list_pass = 0;
}
/*
- * Scanning the task stacks may introduce false negatives and it is
- * not enabled by default.
+ * Scanning the task stacks (may introduce false negatives).
*/
if (kmemleak_stack_scan) {
+ struct task_struct *p, *g;
+
read_lock(&tasklist_lock);
- for_each_process(task)
- scan_block(task_stack_page(task),
- task_stack_page(task) + THREAD_SIZE,
- NULL, 0);
+ do_each_thread(g, p) {
+ scan_block(task_stack_page(p), task_stack_page(p) +
+ THREAD_SIZE, NULL, 0);
+ } while_each_thread(g, p);
read_unlock(&tasklist_lock);
}
* Start the automatic memory scanning thread. This function must be called
* with the scan_mutex held.
*/
-void start_scan_thread(void)
+static void start_scan_thread(void)
{
if (scan_thread)
return;
* Stop the automatic memory scanning thread. This function must be called
* with the scan_mutex held.
*/
-void stop_scan_thread(void)
+static void stop_scan_thread(void)
{
if (scan_thread) {
kthread_stop(scan_thread);
}
object = NULL;
out:
- rcu_read_unlock();
return object;
}
++(*pos);
- rcu_read_lock();
list_for_each_continue_rcu(n, &object_list) {
next_obj = list_entry(n, struct kmemleak_object, object_list);
if (get_object(next_obj))
break;
}
- rcu_read_unlock();
put_object(prev_obj);
return next_obj;
* kmemleak_seq_start may return ERR_PTR if the scan_mutex
* waiting was interrupted, so only release it if !IS_ERR.
*/
+ rcu_read_unlock();
mutex_unlock(&scan_mutex);
if (v)
put_object(v);
return seq_release(inode, file);
}
+static int dump_str_object_info(const char *str)
+{
+ unsigned long flags;
+ struct kmemleak_object *object;
+ unsigned long addr;
+
+ addr= simple_strtoul(str, NULL, 0);
+ object = find_and_get_object(addr, 0);
+ if (!object) {
+ pr_info("Unknown object at 0x%08lx\n", addr);
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&object->lock, flags);
+ dump_object_info(object);
+ spin_unlock_irqrestore(&object->lock, flags);
+
+ put_object(object);
+ return 0;
+}
+
+/*
+ * We use grey instead of black to ensure we can do future scans on the same
+ * objects. If we did not do future scans these black objects could
+ * potentially contain references to newly allocated objects in the future and
+ * we'd end up with false positives.
+ */
+static void kmemleak_clear(void)
+{
+ struct kmemleak_object *object;
+ unsigned long flags;
+
+ rcu_read_lock();
+ list_for_each_entry_rcu(object, &object_list, object_list) {
+ spin_lock_irqsave(&object->lock, flags);
+ if ((object->flags & OBJECT_REPORTED) &&
+ unreferenced_object(object))
+ __paint_it(object, KMEMLEAK_GREY);
+ spin_unlock_irqrestore(&object->lock, flags);
+ }
+ rcu_read_unlock();
+}
+
/*
* File write operation to configure kmemleak at run-time. The following
* commands can be written to the /sys/kernel/debug/kmemleak file:
* scan=... - set the automatic memory scanning period in seconds (0 to
* disable it)
* scan - trigger a memory scan
+ * clear - mark all current reported unreferenced kmemleak objects as
+ * grey to ignore printing them
+ * dump=... - dump information about the object found at the given address
*/
static ssize_t kmemleak_write(struct file *file, const char __user *user_buf,
size_t size, loff_t *ppos)
}
} else if (strncmp(buf, "scan", 4) == 0)
kmemleak_scan();
+ else if (strncmp(buf, "clear", 5) == 0)
+ kmemleak_clear();
+ else if (strncmp(buf, "dump=", 5) == 0)
+ ret = dump_str_object_info(buf + 5);
else
ret = -EINVAL;
* Perform the freeing of the kmemleak internal objects after waiting for any
* current memory scan to complete.
*/
-static int kmemleak_cleanup_thread(void *arg)
+static void kmemleak_do_cleanup(struct work_struct *work)
{
struct kmemleak_object *object;
delete_object_full(object->pointer);
rcu_read_unlock();
mutex_unlock(&scan_mutex);
-
- return 0;
}
-/*
- * Start the clean-up thread.
- */
-static void kmemleak_cleanup(void)
-{
- struct task_struct *cleanup_thread;
-
- cleanup_thread = kthread_run(kmemleak_cleanup_thread, NULL,
- "kmemleak-clean");
- if (IS_ERR(cleanup_thread))
- pr_warning("Failed to create the clean-up thread\n");
-}
+static DECLARE_WORK(cleanup_work, kmemleak_do_cleanup);
/*
* Disable kmemleak. No memory allocation/freeing will be traced once this
/* check whether it is too early for a kernel thread */
if (atomic_read(&kmemleak_initialized))
- kmemleak_cleanup();
+ schedule_work(&cleanup_work);
pr_info("Kernel memory leak detector disabled\n");
}
switch (log->op_type) {
case KMEMLEAK_ALLOC:
- kmemleak_alloc(log->ptr, log->size, log->min_count,
- GFP_KERNEL);
+ early_alloc(log);
break;
case KMEMLEAK_FREE:
kmemleak_free(log->ptr);
* after setting kmemleak_initialized and we may end up with
* two clean-up threads but serialized by scan_mutex.
*/
- kmemleak_cleanup();
+ schedule_work(&cleanup_work);
return -ENOMEM;
}
ret = 0;
out:
unlock_page_cgroup(pc);
+ /*
+ * We charges against "to" which may not have any tasks. Then, "to"
+ * can be under rmdir(). But in current implementation, caller of
+ * this function is just force_empty() and it's garanteed that
+ * "to" is never removed. So, we don't check rmdir status here.
+ */
return ret;
}
return;
if (!ptr)
return;
+ cgroup_exclude_rmdir(&ptr->css);
pc = lookup_page_cgroup(page);
mem_cgroup_lru_del_before_commit_swapcache(page);
__mem_cgroup_commit_charge(ptr, pc, ctype);
}
rcu_read_unlock();
}
- /* add this page(page_cgroup) to the LRU we want. */
-
+ /*
+ * At swapin, we may charge account against cgroup which has no tasks.
+ * So, rmdir()->pre_destroy() can be called while we do this charge.
+ * In that case, we need to call pre_destroy() again. check it here.
+ */
+ cgroup_release_and_wakeup_rmdir(&ptr->css);
}
void mem_cgroup_commit_charge_swapin(struct page *page, struct mem_cgroup *ptr)
if (!mem)
return;
-
+ cgroup_exclude_rmdir(&mem->css);
/* at migration success, oldpage->mapping is NULL. */
if (oldpage->mapping) {
target = oldpage;
*/
if (ctype == MEM_CGROUP_CHARGE_TYPE_MAPPED)
mem_cgroup_uncharge_page(target);
+ /*
+ * At migration, we may charge account against cgroup which has no tasks
+ * So, rmdir()->pre_destroy() can be called while we do this charge.
+ * In that case, we need to call pre_destroy() again. check it here.
+ */
+ cgroup_release_and_wakeup_rmdir(&mem->css);
}
/*
* Note: this doesn't free the actual pages themselves. That
* has been handled earlier when unmapping all the memory regions.
*/
-static void free_pte_range(struct mmu_gather *tlb, pmd_t *pmd)
+static void free_pte_range(struct mmu_gather *tlb, pmd_t *pmd,
+ unsigned long addr)
{
pgtable_t token = pmd_pgtable(*pmd);
pmd_clear(pmd);
- pte_free_tlb(tlb, token);
+ pte_free_tlb(tlb, token, addr);
tlb->mm->nr_ptes--;
}
next = pmd_addr_end(addr, end);
if (pmd_none_or_clear_bad(pmd))
continue;
- free_pte_range(tlb, pmd);
+ free_pte_range(tlb, pmd, addr);
} while (pmd++, addr = next, addr != end);
start &= PUD_MASK;
pmd = pmd_offset(pud, start);
pud_clear(pud);
- pmd_free_tlb(tlb, pmd);
+ pmd_free_tlb(tlb, pmd, start);
}
static inline void free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
pud = pud_offset(pgd, start);
pgd_clear(pgd);
- pud_free_tlb(tlb, pud);
+ pud_free_tlb(tlb, pud, start);
}
/*
* Must be called holding task's alloc_lock to protect task's mems_allowed
* and mempolicy. May also be called holding the mmap_semaphore for write.
*/
-static int mpol_set_nodemask(struct mempolicy *pol, const nodemask_t *nodes)
+static int mpol_set_nodemask(struct mempolicy *pol,
+ const nodemask_t *nodes, struct nodemask_scratch *nsc)
{
- nodemask_t cpuset_context_nmask;
int ret;
/* if mode is MPOL_DEFAULT, pol is NULL. This is right. */
if (pol == NULL)
return 0;
+ /* Check N_HIGH_MEMORY */
+ nodes_and(nsc->mask1,
+ cpuset_current_mems_allowed, node_states[N_HIGH_MEMORY]);
VM_BUG_ON(!nodes);
if (pol->mode == MPOL_PREFERRED && nodes_empty(*nodes))
nodes = NULL; /* explicit local allocation */
else {
if (pol->flags & MPOL_F_RELATIVE_NODES)
- mpol_relative_nodemask(&cpuset_context_nmask, nodes,
- &cpuset_current_mems_allowed);
+ mpol_relative_nodemask(&nsc->mask2, nodes,&nsc->mask1);
else
- nodes_and(cpuset_context_nmask, *nodes,
- cpuset_current_mems_allowed);
+ nodes_and(nsc->mask2, *nodes, nsc->mask1);
+
if (mpol_store_user_nodemask(pol))
pol->w.user_nodemask = *nodes;
else
cpuset_current_mems_allowed;
}
- ret = mpol_ops[pol->mode].create(pol,
- nodes ? &cpuset_context_nmask : NULL);
+ if (nodes)
+ ret = mpol_ops[pol->mode].create(pol, &nsc->mask2);
+ else
+ ret = mpol_ops[pol->mode].create(pol, NULL);
return ret;
}
{
struct mempolicy *new, *old;
struct mm_struct *mm = current->mm;
+ NODEMASK_SCRATCH(scratch);
int ret;
- new = mpol_new(mode, flags, nodes);
- if (IS_ERR(new))
- return PTR_ERR(new);
+ if (!scratch)
+ return -ENOMEM;
+ new = mpol_new(mode, flags, nodes);
+ if (IS_ERR(new)) {
+ ret = PTR_ERR(new);
+ goto out;
+ }
/*
* prevent changing our mempolicy while show_numa_maps()
* is using it.
if (mm)
down_write(&mm->mmap_sem);
task_lock(current);
- ret = mpol_set_nodemask(new, nodes);
+ ret = mpol_set_nodemask(new, nodes, scratch);
if (ret) {
task_unlock(current);
if (mm)
up_write(&mm->mmap_sem);
mpol_put(new);
- return ret;
+ goto out;
}
old = current->mempolicy;
current->mempolicy = new;
up_write(&mm->mmap_sem);
mpol_put(old);
- return 0;
+ ret = 0;
+out:
+ NODEMASK_SCRATCH_FREE(scratch);
+ return ret;
}
/*
if (err)
return err;
}
- down_write(&mm->mmap_sem);
- task_lock(current);
- err = mpol_set_nodemask(new, nmask);
- task_unlock(current);
+ {
+ NODEMASK_SCRATCH(scratch);
+ if (scratch) {
+ down_write(&mm->mmap_sem);
+ task_lock(current);
+ err = mpol_set_nodemask(new, nmask, scratch);
+ task_unlock(current);
+ if (err)
+ up_write(&mm->mmap_sem);
+ } else
+ err = -ENOMEM;
+ NODEMASK_SCRATCH_FREE(scratch);
+ }
if (err) {
- up_write(&mm->mmap_sem);
mpol_put(new);
return err;
}
* Install non-NULL @mpol in inode's shared policy rb-tree.
* On entry, the current task has a reference on a non-NULL @mpol.
* This must be released on exit.
+ * This is called at get_inode() calls and we can use GFP_KERNEL.
*/
void mpol_shared_policy_init(struct shared_policy *sp, struct mempolicy *mpol)
{
if (mpol) {
struct vm_area_struct pvma;
struct mempolicy *new;
+ NODEMASK_SCRATCH(scratch);
+ if (!scratch)
+ return;
/* contextualize the tmpfs mount point mempolicy */
new = mpol_new(mpol->mode, mpol->flags, &mpol->w.user_nodemask);
if (IS_ERR(new)) {
mpol_put(mpol); /* drop our ref on sb mpol */
+ NODEMASK_SCRATCH_FREE(scratch);
return; /* no valid nodemask intersection */
}
task_lock(current);
- ret = mpol_set_nodemask(new, &mpol->w.user_nodemask);
+ ret = mpol_set_nodemask(new, &mpol->w.user_nodemask, scratch);
task_unlock(current);
mpol_put(mpol); /* drop our ref on sb mpol */
if (ret) {
+ NODEMASK_SCRATCH_FREE(scratch);
mpol_put(new);
return;
}
pvma.vm_end = TASK_SIZE; /* policy covers entire file */
mpol_set_shared_policy(sp, &pvma, new); /* adds ref */
mpol_put(new); /* drop initial ref */
+ NODEMASK_SCRATCH_FREE(scratch);
}
}
err = 1;
else {
int ret;
-
- task_lock(current);
- ret = mpol_set_nodemask(new, &nodes);
- task_unlock(current);
- if (ret)
+ NODEMASK_SCRATCH(scratch);
+ if (scratch) {
+ task_lock(current);
+ ret = mpol_set_nodemask(new, &nodes, scratch);
+ task_unlock(current);
+ } else
+ ret = -ENOMEM;
+ NODEMASK_SCRATCH_FREE(scratch);
+ if (ret) {
err = 1;
- else if (no_context) {
+ mpol_put(new);
+ } else if (no_context) {
/* save for contextualization */
new->w.user_nodemask = nodes;
}
*/
void *mempool_kmalloc(gfp_t gfp_mask, void *pool_data)
{
- size_t size = (size_t)(long)pool_data;
+ size_t size = (size_t)pool_data;
return kmalloc(size, gfp_mask);
}
EXPORT_SYMBOL(mempool_kmalloc);
void *mempool_kzalloc(gfp_t gfp_mask, void *pool_data)
{
- size_t size = (size_t) pool_data;
+ size_t size = (size_t)pool_data;
return kzalloc(size, gfp_mask);
}
EXPORT_SYMBOL(mempool_kzalloc);
int sysctl_max_map_count __read_mostly = DEFAULT_MAX_MAP_COUNT;
struct percpu_counter vm_committed_as;
-/* amount of vm to protect from userspace access */
-unsigned long mmap_min_addr = CONFIG_DEFAULT_MMAP_MIN_ADDR;
-
/*
* Check that a process has enough memory to allocate a new virtual
* mapping. 0 means there is enough memory for the allocation to
int sysctl_nr_trim_pages = CONFIG_NOMMU_INITIAL_TRIM_EXCESS;
int heap_stack_gap = 0;
-/* amount of vm to protect from userspace access */
-unsigned long mmap_min_addr = CONFIG_DEFAULT_MMAP_MIN_ADDR;
-
atomic_long_t mmap_pages_allocated;
EXPORT_SYMBOL(mem_map);
if (!file->f_op->read)
capabilities &= ~BDI_CAP_MAP_COPY;
+ /* The file shall have been opened with read permission. */
+ if (!(file->f_mode & FMODE_READ))
+ return -EACCES;
+
if (flags & MAP_SHARED) {
/* do checks for writing, appending and locking */
if ((prot & PROT_WRITE) &&
}
vma->vm_region = region;
+ add_nommu_region(region);
/* set up the mapping */
if (file && vma->vm_flags & VM_SHARED)
if (ret < 0)
goto error_put_region;
- add_nommu_region(region);
-
/* okay... we have a mapping; now we have to register it */
result = vma->vm_start;
unsigned long points, cpu_time, run_time;
struct mm_struct *mm;
struct task_struct *child;
- int oom_adj;
task_lock(p);
mm = p->mm;
task_unlock(p);
return 0;
}
- oom_adj = mm->oom_adj;
- if (oom_adj == OOM_DISABLE) {
- task_unlock(p);
- return 0;
- }
/*
* The memory size of the process is the basis for the badness.
points /= 8;
/*
- * Adjust the score by oom_adj.
+ * Adjust the score by oomkilladj.
*/
- if (oom_adj) {
- if (oom_adj > 0) {
+ if (p->oomkilladj) {
+ if (p->oomkilladj > 0) {
if (!points)
points = 1;
- points <<= oom_adj;
+ points <<= p->oomkilladj;
} else
- points >>= -(oom_adj);
+ points >>= -(p->oomkilladj);
}
#ifdef DEBUG
*ppoints = ULONG_MAX;
}
+ if (p->oomkilladj == OOM_DISABLE)
+ continue;
+
points = badness(p, uptime.tv_sec);
- if (points > *ppoints) {
+ if (points > *ppoints || !chosen) {
chosen = p;
*ppoints = points;
}
}
printk(KERN_INFO "[%5d] %5d %5d %8lu %8lu %3d %3d %s\n",
p->pid, __task_cred(p)->uid, p->tgid, mm->total_vm,
- get_mm_rss(mm), (int)task_cpu(p), mm->oom_adj, p->comm);
+ get_mm_rss(mm), (int)task_cpu(p), p->oomkilladj,
+ p->comm);
task_unlock(p);
} while_each_thread(g, p);
}
return;
}
- if (!p->mm)
+ if (!p->mm) {
+ WARN_ON(1);
+ printk(KERN_WARNING "tried to kill an mm-less task!\n");
return;
+ }
if (verbose)
printk(KERN_ERR "Killed process %d (%s)\n",
struct mm_struct *mm;
struct task_struct *g, *q;
- task_lock(p);
mm = p->mm;
- if (!mm || mm->oom_adj == OOM_DISABLE) {
- task_unlock(p);
+
+ /* WARNING: mm may not be dereferenced since we did not obtain its
+ * value from get_task_mm(p). This is OK since all we need to do is
+ * compare mm to q->mm below.
+ *
+ * Furthermore, even if mm contains a non-NULL value, p->mm may
+ * change to NULL at any time since we do not hold task_lock(p).
+ * However, this is of no concern to us.
+ */
+
+ if (mm == NULL)
return 1;
- }
- task_unlock(p);
+
+ /*
+ * Don't kill the process if any threads are set to OOM_DISABLE
+ */
+ do_each_thread(g, q) {
+ if (q->mm == mm && q->oomkilladj == OOM_DISABLE)
+ return 1;
+ } while_each_thread(g, q);
+
__oom_kill_task(p, 1);
/*
struct task_struct *c;
if (printk_ratelimit()) {
- task_lock(current);
printk(KERN_WARNING "%s invoked oom-killer: "
- "gfp_mask=0x%x, order=%d, oom_adj=%d\n",
- current->comm, gfp_mask, order,
- current->mm ? current->mm->oom_adj : OOM_DISABLE);
+ "gfp_mask=0x%x, order=%d, oomkilladj=%d\n",
+ current->comm, gfp_mask, order, current->oomkilladj);
+ task_lock(current);
cpuset_print_task_mems_allowed(current);
task_unlock(current);
dump_stack();
/*
* If the task is already exiting, don't alarm the sysadmin or kill
* its children or threads, just set TIF_MEMDIE so it can die quickly
- * if its mm is still attached.
*/
- if (p->mm && (p->flags & PF_EXITING)) {
+ if (p->flags & PF_EXITING) {
__oom_kill_task(p, 0);
return 0;
}
#include <linux/buffer_head.h>
#include <linux/pagevec.h>
-/*
- * The maximum number of pages to writeout in a single bdflush/kupdate
- * operation. We do this so we don't hold I_SYNC against an inode for
- * enormous amounts of time, which would block a userspace task which has
- * been forced to throttle against that inode. Also, the code reevaluates
- * the dirty each time it has written this many pages.
- */
-#define MAX_WRITEBACK_PAGES 1024
-
/*
* After a CPU has dirtied this many pages, balance_dirty_pages_ratelimited
* will look to see if it needs to force writeback or throttling.
/* End of sysctl-exported parameters */
-static void background_writeout(unsigned long _min_pages);
-
/*
* Scale the writeback cache size proportional to the relative writeout speeds.
*
/*
*
*/
-static DEFINE_SPINLOCK(bdi_lock);
static unsigned int bdi_min_ratio;
int bdi_set_min_ratio(struct backing_dev_info *bdi, unsigned int min_ratio)
{
int ret = 0;
- unsigned long flags;
- spin_lock_irqsave(&bdi_lock, flags);
+ spin_lock(&bdi_lock);
if (min_ratio > bdi->max_ratio) {
ret = -EINVAL;
} else {
ret = -EINVAL;
}
}
- spin_unlock_irqrestore(&bdi_lock, flags);
+ spin_unlock(&bdi_lock);
return ret;
}
int bdi_set_max_ratio(struct backing_dev_info *bdi, unsigned max_ratio)
{
- unsigned long flags;
int ret = 0;
if (max_ratio > 100)
return -EINVAL;
- spin_lock_irqsave(&bdi_lock, flags);
+ spin_lock(&bdi_lock);
if (bdi->min_ratio > max_ratio) {
ret = -EINVAL;
} else {
bdi->max_ratio = max_ratio;
bdi->max_prop_frac = (PROP_FRAC_BASE * max_ratio) / 100;
}
- spin_unlock_irqrestore(&bdi_lock, flags);
+ spin_unlock(&bdi_lock);
return ret;
}
* up.
*/
if (bdi_nr_reclaimable > bdi_thresh) {
- writeback_inodes(&wbc);
+ writeback_inodes_wbc(&wbc);
pages_written += write_chunk - wbc.nr_to_write;
get_dirty_limits(&background_thresh, &dirty_thresh,
&bdi_thresh, bdi);
if (pages_written >= write_chunk)
break; /* We've done our duty */
- congestion_wait(BLK_RW_ASYNC, HZ/10);
+ schedule_timeout(1);
}
if (bdi_nr_reclaimable + bdi_nr_writeback < bdi_thresh &&
* background_thresh, to keep the amount of dirty memory low.
*/
if ((laptop_mode && pages_written) ||
- (!laptop_mode && (global_page_state(NR_FILE_DIRTY)
- + global_page_state(NR_UNSTABLE_NFS)
- > background_thresh)))
- pdflush_operation(background_writeout, 0);
+ (!laptop_mode && ((nr_writeback = global_page_state(NR_FILE_DIRTY)
+ + global_page_state(NR_UNSTABLE_NFS))
+ > background_thresh))) {
+ struct writeback_control wbc = {
+ .bdi = bdi,
+ .sync_mode = WB_SYNC_NONE,
+ .nr_to_write = nr_writeback,
+ };
+
+
+ bdi_start_writeback(&wbc);
+ }
}
void set_page_dirty_balance(struct page *page, int page_mkwrite)
}
}
-/*
- * writeback at least _min_pages, and keep writing until the amount of dirty
- * memory is less than the background threshold, or until we're all clean.
- */
-static void background_writeout(unsigned long _min_pages)
-{
- long min_pages = _min_pages;
- struct writeback_control wbc = {
- .bdi = NULL,
- .sync_mode = WB_SYNC_NONE,
- .older_than_this = NULL,
- .nr_to_write = 0,
- .nonblocking = 1,
- .range_cyclic = 1,
- };
-
- for ( ; ; ) {
- unsigned long background_thresh;
- unsigned long dirty_thresh;
-
- get_dirty_limits(&background_thresh, &dirty_thresh, NULL, NULL);
- if (global_page_state(NR_FILE_DIRTY) +
- global_page_state(NR_UNSTABLE_NFS) < background_thresh
- && min_pages <= 0)
- break;
- wbc.more_io = 0;
- wbc.encountered_congestion = 0;
- wbc.nr_to_write = MAX_WRITEBACK_PAGES;
- wbc.pages_skipped = 0;
- writeback_inodes(&wbc);
- min_pages -= MAX_WRITEBACK_PAGES - wbc.nr_to_write;
- if (wbc.nr_to_write > 0 || wbc.pages_skipped > 0) {
- /* Wrote less than expected */
- if (wbc.encountered_congestion || wbc.more_io)
- congestion_wait(BLK_RW_ASYNC, HZ/10);
- else
- break;
- }
- }
-}
-
-/*
- * Start writeback of `nr_pages' pages. If `nr_pages' is zero, write back
- * the whole world. Returns 0 if a pdflush thread was dispatched. Returns
- * -1 if all pdflush threads were busy.
- */
-int wakeup_pdflush(long nr_pages)
-{
- if (nr_pages == 0)
- nr_pages = global_page_state(NR_FILE_DIRTY) +
- global_page_state(NR_UNSTABLE_NFS);
- return pdflush_operation(background_writeout, nr_pages);
-}
-
-static void wb_timer_fn(unsigned long unused);
static void laptop_timer_fn(unsigned long unused);
-static DEFINE_TIMER(wb_timer, wb_timer_fn, 0, 0);
static DEFINE_TIMER(laptop_mode_wb_timer, laptop_timer_fn, 0, 0);
-/*
- * Periodic writeback of "old" data.
- *
- * Define "old": the first time one of an inode's pages is dirtied, we mark the
- * dirtying-time in the inode's address_space. So this periodic writeback code
- * just walks the superblock inode list, writing back any inodes which are
- * older than a specific point in time.
- *
- * Try to run once per dirty_writeback_interval. But if a writeback event
- * takes longer than a dirty_writeback_interval interval, then leave a
- * one-second gap.
- *
- * older_than_this takes precedence over nr_to_write. So we'll only write back
- * all dirty pages if they are all attached to "old" mappings.
- */
-static void wb_kupdate(unsigned long arg)
-{
- unsigned long oldest_jif;
- unsigned long start_jif;
- unsigned long next_jif;
- long nr_to_write;
- struct writeback_control wbc = {
- .bdi = NULL,
- .sync_mode = WB_SYNC_NONE,
- .older_than_this = &oldest_jif,
- .nr_to_write = 0,
- .nonblocking = 1,
- .for_kupdate = 1,
- .range_cyclic = 1,
- };
-
- sync_supers();
-
- oldest_jif = jiffies - msecs_to_jiffies(dirty_expire_interval * 10);
- start_jif = jiffies;
- next_jif = start_jif + msecs_to_jiffies(dirty_writeback_interval * 10);
- nr_to_write = global_page_state(NR_FILE_DIRTY) +
- global_page_state(NR_UNSTABLE_NFS) +
- (inodes_stat.nr_inodes - inodes_stat.nr_unused);
- while (nr_to_write > 0) {
- wbc.more_io = 0;
- wbc.encountered_congestion = 0;
- wbc.nr_to_write = MAX_WRITEBACK_PAGES;
- writeback_inodes(&wbc);
- if (wbc.nr_to_write > 0) {
- if (wbc.encountered_congestion || wbc.more_io)
- congestion_wait(BLK_RW_ASYNC, HZ/10);
- else
- break; /* All the old data is written */
- }
- nr_to_write -= MAX_WRITEBACK_PAGES - wbc.nr_to_write;
- }
- if (time_before(next_jif, jiffies + HZ))
- next_jif = jiffies + HZ;
- if (dirty_writeback_interval)
- mod_timer(&wb_timer, next_jif);
-}
-
/*
* sysctl handler for /proc/sys/vm/dirty_writeback_centisecs
*/
struct file *file, void __user *buffer, size_t *length, loff_t *ppos)
{
proc_dointvec(table, write, file, buffer, length, ppos);
- if (dirty_writeback_interval)
- mod_timer(&wb_timer, jiffies +
- msecs_to_jiffies(dirty_writeback_interval * 10));
- else
- del_timer(&wb_timer);
return 0;
}
-static void wb_timer_fn(unsigned long unused)
-{
- if (pdflush_operation(wb_kupdate, 0) < 0)
- mod_timer(&wb_timer, jiffies + HZ); /* delay 1 second */
-}
-
-static void laptop_flush(unsigned long unused)
+static void do_laptop_sync(struct work_struct *work)
{
- sys_sync();
+ wakeup_flusher_threads(0);
+ kfree(work);
}
static void laptop_timer_fn(unsigned long unused)
{
- pdflush_operation(laptop_flush, 0);
+ struct work_struct *work;
+
+ work = kmalloc(sizeof(*work), GFP_ATOMIC);
+ if (work) {
+ INIT_WORK(work, do_laptop_sync);
+ schedule_work(work);
+ }
}
/*
{
int shift;
- mod_timer(&wb_timer,
- jiffies + msecs_to_jiffies(dirty_writeback_interval * 10));
writeback_set_ratelimit();
register_cpu_notifier(&ratelimit_nb);
* agressive about taking ownership of free pages
*/
if (unlikely(current_order >= (pageblock_order >> 1)) ||
- start_migratetype == MIGRATE_RECLAIMABLE) {
+ start_migratetype == MIGRATE_RECLAIMABLE ||
+ page_group_by_mobility_disabled) {
unsigned long pages;
pages = move_freepages_block(zone, page,
start_migratetype);
/* Claim the whole block if over half of it is free */
- if (pages >= (1 << (pageblock_order-1)))
+ if (pages >= (1 << (pageblock_order-1)) ||
+ page_group_by_mobility_disabled)
set_pageblock_migratetype(page,
start_migratetype);
*/
static int rmqueue_bulk(struct zone *zone, unsigned int order,
unsigned long count, struct list_head *list,
- int migratetype)
+ int migratetype, int cold)
{
int i;
* merge IO requests if the physical pages are ordered
* properly.
*/
- list_add(&page->lru, list);
+ if (likely(cold == 0))
+ list_add(&page->lru, list);
+ else
+ list_add_tail(&page->lru, list);
set_page_private(page, migratetype);
list = &page->lru;
}
local_irq_save(flags);
if (!pcp->count) {
pcp->count = rmqueue_bulk(zone, 0,
- pcp->batch, &pcp->list, migratetype);
+ pcp->batch, &pcp->list,
+ migratetype, cold);
if (unlikely(!pcp->count))
goto failed;
}
/* Allocate more to the pcp list if necessary */
if (unlikely(&page->lru == &pcp->list)) {
pcp->count += rmqueue_bulk(zone, 0,
- pcp->batch, &pcp->list, migratetype);
+ pcp->batch, &pcp->list,
+ migratetype, cold);
page = list_entry(pcp->list.next, struct page, lru);
}
* be using allocators in order of preference for an area that is
* too large.
*/
- if (WARN_ON_ONCE(order >= MAX_ORDER))
+ if (order >= MAX_ORDER) {
+ WARN_ON_ONCE(!(gfp_mask & __GFP_NOWARN));
return NULL;
+ }
/*
* GFP_THISNODE (meaning __GFP_THISNODE, __GFP_NORETRY and
if (p->flags & PF_MEMALLOC)
goto nopage;
+ /* Avoid allocations with no watermarks from looping endlessly */
+ if (test_thread_flag(TIF_MEMDIE) && !(gfp_mask & __GFP_NOFAIL))
+ goto nopage;
+
/* Try direct reclaim and then allocating */
page = __alloc_pages_direct_reclaim(gfp_mask, order,
zonelist, high_zoneidx,
prev_node = local_node;
nodes_clear(used_mask);
- memset(node_load, 0, sizeof(node_load));
memset(node_order, 0, sizeof(node_order));
j = 0;
{
int nid;
+#ifdef CONFIG_NUMA
+ memset(node_load, 0, sizeof(node_load));
+#endif
for_each_online_node(nid) {
pg_data_t *pgdat = NODE_DATA(nid);
+++ /dev/null
-/*
- * mm/pdflush.c - worker threads for writing back filesystem data
- *
- * Copyright (C) 2002, Linus Torvalds.
- *
- * 09Apr2002 Andrew Morton
- * Initial version
- * 29Feb2004 kaos@sgi.com
- * Move worker thread creation to kthread to avoid chewing
- * up stack space with nested calls to kernel_thread.
- */
-
-#include <linux/sched.h>
-#include <linux/list.h>
-#include <linux/signal.h>
-#include <linux/spinlock.h>
-#include <linux/gfp.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/fs.h> /* Needed by writeback.h */
-#include <linux/writeback.h> /* Prototypes pdflush_operation() */
-#include <linux/kthread.h>
-#include <linux/cpuset.h>
-#include <linux/freezer.h>
-
-
-/*
- * Minimum and maximum number of pdflush instances
- */
-#define MIN_PDFLUSH_THREADS 2
-#define MAX_PDFLUSH_THREADS 8
-
-static void start_one_pdflush_thread(void);
-
-
-/*
- * The pdflush threads are worker threads for writing back dirty data.
- * Ideally, we'd like one thread per active disk spindle. But the disk
- * topology is very hard to divine at this level. Instead, we take
- * care in various places to prevent more than one pdflush thread from
- * performing writeback against a single filesystem. pdflush threads
- * have the PF_FLUSHER flag set in current->flags to aid in this.
- */
-
-/*
- * All the pdflush threads. Protected by pdflush_lock
- */
-static LIST_HEAD(pdflush_list);
-static DEFINE_SPINLOCK(pdflush_lock);
-
-/*
- * The count of currently-running pdflush threads. Protected
- * by pdflush_lock.
- *
- * Readable by sysctl, but not writable. Published to userspace at
- * /proc/sys/vm/nr_pdflush_threads.
- */
-int nr_pdflush_threads = 0;
-
-/*
- * The time at which the pdflush thread pool last went empty
- */
-static unsigned long last_empty_jifs;
-
-/*
- * The pdflush thread.
- *
- * Thread pool management algorithm:
- *
- * - The minimum and maximum number of pdflush instances are bound
- * by MIN_PDFLUSH_THREADS and MAX_PDFLUSH_THREADS.
- *
- * - If there have been no idle pdflush instances for 1 second, create
- * a new one.
- *
- * - If the least-recently-went-to-sleep pdflush thread has been asleep
- * for more than one second, terminate a thread.
- */
-
-/*
- * A structure for passing work to a pdflush thread. Also for passing
- * state information between pdflush threads. Protected by pdflush_lock.
- */
-struct pdflush_work {
- struct task_struct *who; /* The thread */
- void (*fn)(unsigned long); /* A callback function */
- unsigned long arg0; /* An argument to the callback */
- struct list_head list; /* On pdflush_list, when idle */
- unsigned long when_i_went_to_sleep;
-};
-
-static int __pdflush(struct pdflush_work *my_work)
-{
- current->flags |= PF_FLUSHER | PF_SWAPWRITE;
- set_freezable();
- my_work->fn = NULL;
- my_work->who = current;
- INIT_LIST_HEAD(&my_work->list);
-
- spin_lock_irq(&pdflush_lock);
- for ( ; ; ) {
- struct pdflush_work *pdf;
-
- set_current_state(TASK_INTERRUPTIBLE);
- list_move(&my_work->list, &pdflush_list);
- my_work->when_i_went_to_sleep = jiffies;
- spin_unlock_irq(&pdflush_lock);
- schedule();
- try_to_freeze();
- spin_lock_irq(&pdflush_lock);
- if (!list_empty(&my_work->list)) {
- /*
- * Someone woke us up, but without removing our control
- * structure from the global list. swsusp will do this
- * in try_to_freeze()->refrigerator(). Handle it.
- */
- my_work->fn = NULL;
- continue;
- }
- if (my_work->fn == NULL) {
- printk("pdflush: bogus wakeup\n");
- continue;
- }
- spin_unlock_irq(&pdflush_lock);
-
- (*my_work->fn)(my_work->arg0);
-
- spin_lock_irq(&pdflush_lock);
-
- /*
- * Thread creation: For how long have there been zero
- * available threads?
- *
- * To throttle creation, we reset last_empty_jifs.
- */
- if (time_after(jiffies, last_empty_jifs + 1 * HZ)) {
- if (list_empty(&pdflush_list)) {
- if (nr_pdflush_threads < MAX_PDFLUSH_THREADS) {
- last_empty_jifs = jiffies;
- nr_pdflush_threads++;
- spin_unlock_irq(&pdflush_lock);
- start_one_pdflush_thread();
- spin_lock_irq(&pdflush_lock);
- }
- }
- }
-
- my_work->fn = NULL;
-
- /*
- * Thread destruction: For how long has the sleepiest
- * thread slept?
- */
- if (list_empty(&pdflush_list))
- continue;
- if (nr_pdflush_threads <= MIN_PDFLUSH_THREADS)
- continue;
- pdf = list_entry(pdflush_list.prev, struct pdflush_work, list);
- if (time_after(jiffies, pdf->when_i_went_to_sleep + 1 * HZ)) {
- /* Limit exit rate */
- pdf->when_i_went_to_sleep = jiffies;
- break; /* exeunt */
- }
- }
- nr_pdflush_threads--;
- spin_unlock_irq(&pdflush_lock);
- return 0;
-}
-
-/*
- * Of course, my_work wants to be just a local in __pdflush(). It is
- * separated out in this manner to hopefully prevent the compiler from
- * performing unfortunate optimisations against the auto variables. Because
- * these are visible to other tasks and CPUs. (No problem has actually
- * been observed. This is just paranoia).
- */
-static int pdflush(void *dummy)
-{
- struct pdflush_work my_work;
- cpumask_var_t cpus_allowed;
-
- /*
- * Since the caller doesn't even check kthread_run() worked, let's not
- * freak out too much if this fails.
- */
- if (!alloc_cpumask_var(&cpus_allowed, GFP_KERNEL)) {
- printk(KERN_WARNING "pdflush failed to allocate cpumask\n");
- return 0;
- }
-
- /*
- * pdflush can spend a lot of time doing encryption via dm-crypt. We
- * don't want to do that at keventd's priority.
- */
- set_user_nice(current, 0);
-
- /*
- * Some configs put our parent kthread in a limited cpuset,
- * which kthread() overrides, forcing cpus_allowed == cpu_all_mask.
- * Our needs are more modest - cut back to our cpusets cpus_allowed.
- * This is needed as pdflush's are dynamically created and destroyed.
- * The boottime pdflush's are easily placed w/o these 2 lines.
- */
- cpuset_cpus_allowed(current, cpus_allowed);
- set_cpus_allowed_ptr(current, cpus_allowed);
- free_cpumask_var(cpus_allowed);
-
- return __pdflush(&my_work);
-}
-
-/*
- * Attempt to wake up a pdflush thread, and get it to do some work for you.
- * Returns zero if it indeed managed to find a worker thread, and passed your
- * payload to it.
- */
-int pdflush_operation(void (*fn)(unsigned long), unsigned long arg0)
-{
- unsigned long flags;
- int ret = 0;
-
- BUG_ON(fn == NULL); /* Hard to diagnose if it's deferred */
-
- spin_lock_irqsave(&pdflush_lock, flags);
- if (list_empty(&pdflush_list)) {
- ret = -1;
- } else {
- struct pdflush_work *pdf;
-
- pdf = list_entry(pdflush_list.next, struct pdflush_work, list);
- list_del_init(&pdf->list);
- if (list_empty(&pdflush_list))
- last_empty_jifs = jiffies;
- pdf->fn = fn;
- pdf->arg0 = arg0;
- wake_up_process(pdf->who);
- }
- spin_unlock_irqrestore(&pdflush_lock, flags);
-
- return ret;
-}
-
-static void start_one_pdflush_thread(void)
-{
- struct task_struct *k;
-
- k = kthread_run(pdflush, NULL, "pdflush");
- if (unlikely(IS_ERR(k))) {
- spin_lock_irq(&pdflush_lock);
- nr_pdflush_threads--;
- spin_unlock_irq(&pdflush_lock);
- }
-}
-
-static int __init pdflush_init(void)
-{
- int i;
-
- /*
- * Pre-set nr_pdflush_threads... If we fail to create,
- * the count will be decremented.
- */
- nr_pdflush_threads = MIN_PDFLUSH_THREADS;
-
- for (i = 0; i < MIN_PDFLUSH_THREADS; i++)
- start_one_pdflush_thread();
- return 0;
-}
-
-module_init(pdflush_init);
*
* This is percpu allocator which can handle both static and dynamic
* areas. Percpu areas are allocated in chunks in vmalloc area. Each
- * chunk is consisted of num_possible_cpus() units and the first chunk
- * is used for static percpu variables in the kernel image (special
- * boot time alloc/init handling necessary as these areas need to be
- * brought up before allocation services are running). Unit grows as
- * necessary and all units grow or shrink in unison. When a chunk is
- * filled up, another chunk is allocated. ie. in vmalloc area
+ * chunk is consisted of nr_cpu_ids units and the first chunk is used
+ * for static percpu variables in the kernel image (special boot time
+ * alloc/init handling necessary as these areas need to be brought up
+ * before allocation services are running). Unit grows as necessary
+ * and all units grow or shrink in unison. When a chunk is filled up,
+ * another chunk is allocated. ie. in vmalloc area
*
* c0 c1 c2
* ------------------- ------------------- ------------
static bool pcpu_chunk_page_occupied(struct pcpu_chunk *chunk,
int page_idx)
{
- return *pcpu_chunk_pagep(chunk, 0, page_idx) != NULL;
+ /*
+ * Any possible cpu id can be used here, so there's no need to
+ * worry about preemption or cpu hotplug.
+ */
+ return *pcpu_chunk_pagep(chunk, raw_smp_processor_id(),
+ page_idx) != NULL;
}
/* set the pointer to a chunk in a page struct */
return pcpu_first_chunk;
}
+ /*
+ * The address is relative to unit0 which might be unused and
+ * thus unmapped. Offset the address to the unit space of the
+ * current processor before looking it up in the vmalloc
+ * space. Note that any possible cpu id can be used here, so
+ * there's no need to worry about preemption or cpu hotplug.
+ */
+ addr += raw_smp_processor_id() * pcpu_unit_size;
return pcpu_get_page_chunk(vmalloc_to_page(addr));
}
static void pcpu_unmap(struct pcpu_chunk *chunk, int page_start, int page_end,
bool flush_tlb)
{
- unsigned int last = num_possible_cpus() - 1;
+ unsigned int last = nr_cpu_ids - 1;
unsigned int cpu;
/* unmap must not be done on immutable chunk */
*/
static int pcpu_map(struct pcpu_chunk *chunk, int page_start, int page_end)
{
- unsigned int last = num_possible_cpus() - 1;
+ unsigned int last = nr_cpu_ids - 1;
unsigned int cpu;
int err;
chunk->map[chunk->map_used++] = pcpu_unit_size;
chunk->page = chunk->page_ar;
- chunk->vm = get_vm_area(pcpu_chunk_size, GFP_KERNEL);
+ chunk->vm = get_vm_area(pcpu_chunk_size, VM_ALLOC);
if (!chunk->vm) {
free_pcpu_chunk(chunk);
return NULL;
PFN_UP(size_sum));
pcpu_unit_size = pcpu_unit_pages << PAGE_SHIFT;
- pcpu_chunk_size = num_possible_cpus() * pcpu_unit_size;
+ pcpu_chunk_size = nr_cpu_ids * pcpu_unit_size;
pcpu_chunk_struct_size = sizeof(struct pcpu_chunk)
- + num_possible_cpus() * pcpu_unit_pages * sizeof(struct page *);
+ + nr_cpu_ids * pcpu_unit_pages * sizeof(struct page *);
if (dyn_size < 0)
dyn_size = pcpu_unit_size - static_size - reserved_size;
} else
pcpue_unit_size = max_t(size_t, pcpue_size, PCPU_MIN_UNIT_SIZE);
- chunk_size = pcpue_unit_size * num_possible_cpus();
+ chunk_size = pcpue_unit_size * nr_cpu_ids;
pcpue_ptr = __alloc_bootmem_nopanic(chunk_size, PAGE_SIZE,
__pa(MAX_DMA_ADDRESS));
}
/* return the leftover and copy */
- for_each_possible_cpu(cpu) {
+ for (cpu = 0; cpu < nr_cpu_ids; cpu++) {
void *ptr = pcpue_ptr + cpu * pcpue_unit_size;
- free_bootmem(__pa(ptr + pcpue_size),
- pcpue_unit_size - pcpue_size);
- memcpy(ptr, __per_cpu_load, static_size);
+ if (cpu_possible(cpu)) {
+ free_bootmem(__pa(ptr + pcpue_size),
+ pcpue_unit_size - pcpue_size);
+ memcpy(ptr, __per_cpu_load, static_size);
+ } else
+ free_bootmem(__pa(ptr), pcpue_unit_size);
}
/* we're ready, commit */
*/
if (vma->vm_flags & VM_LOCKED) {
*mapcount = 1; /* break early from loop */
+ *vm_flags |= VM_LOCKED;
goto out_unmap;
}
.getxattr = generic_getxattr,
.listxattr = generic_listxattr,
.removexattr = generic_removexattr,
- .permission = shmem_permission,
+ .check_acl = shmem_check_acl,
#endif
};
.getxattr = generic_getxattr,
.listxattr = generic_listxattr,
.removexattr = generic_removexattr,
- .permission = shmem_permission,
+ .check_acl = shmem_check_acl,
#endif
};
.getxattr = generic_getxattr,
.listxattr = generic_listxattr,
.removexattr = generic_removexattr,
- .permission = shmem_permission,
+ .check_acl = shmem_check_acl,
#endif
};
/**
* shmem_check_acl - check_acl() callback for generic_permission()
*/
-static int
+int
shmem_check_acl(struct inode *inode, int mask)
{
struct posix_acl *acl = shmem_get_acl(inode, ACL_TYPE_ACCESS);
}
return -EAGAIN;
}
-
-/**
- * shmem_permission - permission() inode operation
- */
-int
-shmem_permission(struct inode *inode, int mask)
-{
- return generic_permission(inode, mask, shmem_check_acl);
-}
*/
void kmem_cache_destroy(struct kmem_cache *s)
{
- if (s->flags & SLAB_DESTROY_BY_RCU)
- rcu_barrier();
down_write(&slub_lock);
s->refcount--;
if (!s->refcount) {
"still has objects.\n", s->name, __func__);
dump_stack();
}
+ if (s->flags & SLAB_DESTROY_BY_RCU)
+ rcu_barrier();
sysfs_slab_remove(s);
} else
up_write(&slub_lock);
};
static struct backing_dev_info swap_backing_dev_info = {
+ .name = "swap",
.capabilities = BDI_CAP_NO_ACCT_AND_WRITEBACK | BDI_CAP_SWAP_BACKED,
.unplug_io_fn = swap_unplug_io_fn,
};
if (!bdev) {
if (bdev_p)
- *bdev_p = bdget(sis->bdev->bd_dev);
+ *bdev_p = bdgrab(sis->bdev);
spin_unlock(&swap_lock);
return i;
struct swap_extent, list);
if (se->start_block == offset) {
if (bdev_p)
- *bdev_p = bdget(sis->bdev->bd_dev);
+ *bdev_p = bdgrab(sis->bdev);
spin_unlock(&swap_lock);
bdput(bdev);
referenced = page_referenced(page, 1,
sc->mem_cgroup, &vm_flags);
- /* In active use or really unfreeable? Activate it. */
+ /*
+ * In active use or really unfreeable? Activate it.
+ * If page which have PG_mlocked lost isoltation race,
+ * try_to_unmap moves it to unevictable list
+ */
if (sc->order <= PAGE_ALLOC_COSTLY_ORDER &&
- referenced && page_mapping_inuse(page))
+ referenced && page_mapping_inuse(page)
+ && !(vm_flags & VM_LOCKED))
goto activate_locked;
/*
*/
if (total_scanned > sc->swap_cluster_max +
sc->swap_cluster_max / 2) {
- wakeup_pdflush(laptop_mode ? 0 : total_scanned);
+ wakeup_flusher_threads(laptop_mode ? 0 : total_scanned);
sc->may_writepage = 1;
}
p9_client_rpc(struct p9_client *c, int8_t type, const char *fmt, ...);
/**
- * v9fs_parse_options - parse mount options into session structure
- * @options: options string passed from mount
- * @v9ses: existing v9fs session information
+ * parse_options - parse mount options into client structure
+ * @opts: options string passed from mount
+ * @clnt: existing v9fs client information
*
* Return 0 upon success, -ERRNO upon failure
*/
}
}
- if (!clnt->trans_mod)
- clnt->trans_mod = v9fs_get_default_trans();
-
kfree(options);
return ret;
}
/**
* p9_tag_init - setup tags structure and contents
- * @tags: tags structure from the client struct
+ * @c: v9fs client struct
*
* This initializes the tags structure for each client instance.
*
/**
* p9_tag_cleanup - cleans up tags structure and reclaims resources
- * @tags: tags structure from the client struct
+ * @c: v9fs client struct
*
* This frees resources associated with the tags structure
*
if (c->dotu)
err = -ecode;
- if (!err) {
+ if (!err || !IS_ERR_VALUE(err))
err = p9_errstr2errno(ename, strlen(ename));
- /* string match failed */
- if (!err)
- err = -ESERVERFAULT;
- }
-
P9_DPRINTK(P9_DEBUG_9P, "<<< RERROR (%d) %s\n", -ecode, ename);
kfree(ename);
/**
* p9_client_flush - flush (cancel) a request
- * c: client state
- * req: request to cancel
+ * @c: client state
+ * @oldreq: request to cancel
*
* This sents a flush for a particular requests and links
* the flush request to the original request. The current
if (err < 0)
goto error;
+ if (!clnt->trans_mod)
+ clnt->trans_mod = v9fs_get_default_trans();
+
if (clnt->trans_mod == NULL) {
err = -EPROTONOSUPPORT;
P9_DPRINTK(P9_DEBUG_ERROR,
if (data) {
memmove(data, dataptr, count);
- data += count;
}
if (udata) {
err = p9pdu_readf(req->rc, clnt->dotu, "wS", &ignored, ret);
if (err) {
- ret = ERR_PTR(err);
p9pdu_dump(1, req->rc);
- goto free_and_error;
+ p9_free_req(clnt, req);
+ goto error;
}
P9_DPRINTK(P9_DEBUG_9P,
p9_free_req(clnt, req);
return ret;
-free_and_error:
- p9_free_req(clnt, req);
error:
kfree(ret);
return ERR_PTR(err);
errstr[len] = 0;
printk(KERN_ERR "%s: server reported unknown error %s\n",
__func__, errstr);
- errno = 1;
+ errno = ESERVERFAULT;
}
return -errno;
* @wpos: write position for current frame
* @wsize: amount of data to write for current frame
* @wbuf: current write buffer
+ * @poll_pending_link: pending links to be polled per conn
* @poll_wait: array of wait_q's for various worker threads
- * @poll_waddr: ????
* @pt: poll state
* @rq: current read work
* @wq: current write work
}
/**
- * parse_options - parse mount options into session structure
- * @options: options string passed from mount
- * @opts: transport-specific structure to parse options into
+ * parse_opts - parse mount options into p9_fd_opts structure
+ * @params: options string passed from mount
+ * @opts: fd transport-specific structure to parse options into
*
* Returns 0 upon success, -ERRNO upon failure
*/
* @pd: Protection Domain pointer
* @qp: Queue Pair pointer
* @cq: Completion Queue pointer
+ * @dm_mr: DMA Memory Region pointer
* @lkey: The local access only memory region key
* @timeout: Number of uSecs to wait for connection management events
* @sq_depth: The depth of the Send Queue
* @sq_sem: Semaphore for the SQ
* @rq_depth: The depth of the Receive Queue.
+ * @rq_count: Count of requests in the Receive Queue.
* @addr: The remote peer's address
* @req_lock: Protects the active request list
- * @send_wait: Wait list when the SQ fills up
* @cm_done: Completion event for connection management tracking
*/
struct p9_trans_rdma {
};
/**
- * parse_options - parse mount options into session structure
- * @options: options string passed from mount
- * @opts: transport-specific structure to parse options into
+ * parse_opts - parse mount options into rdma options structure
+ * @params: options string passed from mount
+ * @opts: rdma transport-specific structure to parse options into
*
* Returns 0 upon success, -ERRNO upon failure
*/
* @initialized: whether the channel is initialized
* @inuse: whether the channel is in use
* @lock: protects multiple elements within this structure
+ * @client: client instance
* @vdev: virtio dev associated with this channel
* @vq: virtio queue associated with this channel
- * @tagpool: accounting for tag ids (and request slots)
- * @reqs: array of request slots
- * @max_tag: current number of request_slots allocated
* @sg: scatter gather list which is used to pack a request (protected?)
*
* We keep all per-channel information in a structure.
/**
* p9_virtio_close - reclaim resources of a channel
- * @trans: transport state
+ * @client: client instance
*
* This reclaims a channel by freeing its resources and
* reseting its inuse flag.
/**
* p9_virtio_request - issue a request
- * @t: transport state
- * @tc: &p9_fcall request to transmit
- * @rc: &p9_fcall to put reponse into
+ * @client: client instance issuing the request
+ * @req: request to be issued
*
*/
return -ENOBUFS;
*uaddr_len = sizeof(struct sockaddr_at);
+ memset(&sat.sat_zero, 0, sizeof(sat.sat_zero));
if (peer) {
if (sk->sk_state != TCP_ESTABLISHED)
/* ---- Initialization ---- */
static int __init rfcomm_init(void)
{
+ int ret;
+
l2cap_load();
hci_register_cb(&rfcomm_cb);
rfcomm_thread = kthread_run(rfcomm_run, NULL, "krfcommd");
if (IS_ERR(rfcomm_thread)) {
- hci_unregister_cb(&rfcomm_cb);
- return PTR_ERR(rfcomm_thread);
+ ret = PTR_ERR(rfcomm_thread);
+ goto out_thread;
}
if (class_create_file(bt_class, &class_attr_rfcomm_dlc) < 0)
BT_ERR("Failed to create RFCOMM info file");
- rfcomm_init_sockets();
+ ret = rfcomm_init_ttys();
+ if (ret)
+ goto out_tty;
-#ifdef CONFIG_BT_RFCOMM_TTY
- rfcomm_init_ttys();
-#endif
+ ret = rfcomm_init_sockets();
+ if (ret)
+ goto out_sock;
BT_INFO("RFCOMM ver %s", VERSION);
return 0;
+
+out_sock:
+ rfcomm_cleanup_ttys();
+out_tty:
+ kthread_stop(rfcomm_thread);
+out_thread:
+ hci_unregister_cb(&rfcomm_cb);
+
+ return ret;
}
static void __exit rfcomm_exit(void)
kthread_stop(rfcomm_thread);
-#ifdef CONFIG_BT_RFCOMM_TTY
rfcomm_cleanup_ttys();
-#endif
rfcomm_cleanup_sockets();
}
return err;
}
-void __exit rfcomm_cleanup_sockets(void)
+void rfcomm_cleanup_sockets(void)
{
class_remove_file(bt_class, &class_attr_rfcomm);
err2:
br_fdb_delete_by_port(br, p, 1);
err1:
- kobject_del(&p->kobj);
+ kobject_put(&p->kobj);
err0:
dev_set_promiscuity(dev, -1);
put_back:
MODULE_DESCRIPTION("PF_CAN broadcast manager protocol");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_AUTHOR("Oliver Hartkopp <oliver.hartkopp@volkswagen.de>");
+MODULE_ALIAS("can-proto-2");
/* easy access to can_frame payload */
static inline u64 GET_U64(const struct can_frame *cp)
bo->ifindex = 0;
}
+ sock_orphan(sk);
+ sock->sk = NULL;
+
release_sock(sk);
sock_put(sk);
MODULE_DESCRIPTION("PF_CAN raw protocol");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_AUTHOR("Urs Thuermann <urs.thuermann@volkswagen.de>");
+MODULE_ALIAS("can-proto-1");
#define MASK_ALL 0
ro->bound = 0;
ro->count = 0;
+ sock_orphan(sk);
+ sock->sk = NULL;
+
release_sock(sk);
sock_put(sk);
if (peer)
return -EOPNOTSUPP;
+ memset(addr, 0, sizeof(*addr));
addr->can_family = AF_CAN;
addr->can_ifindex = ro->ifindex;
dev = __dev_get_by_name(net, name);
read_unlock(&dev_base_lock);
- if (!dev && capable(CAP_SYS_MODULE))
+ if (!dev && capable(CAP_NET_ADMIN))
request_module("%s", name);
}
ASSERT_RTNL();
+ netif_addr_lock_bh(dev);
err = __hw_addr_del(&dev->uc, addr, dev->addr_len,
NETDEV_HW_ADDR_T_UNICAST);
if (!err)
__dev_set_rx_mode(dev);
+ netif_addr_unlock_bh(dev);
return err;
}
EXPORT_SYMBOL(dev_unicast_delete);
ASSERT_RTNL();
+ netif_addr_lock_bh(dev);
err = __hw_addr_add(&dev->uc, addr, dev->addr_len,
NETDEV_HW_ADDR_T_UNICAST);
if (!err)
__dev_set_rx_mode(dev);
+ netif_addr_unlock_bh(dev);
return err;
}
EXPORT_SYMBOL(dev_unicast_add);
* @from: source device
*
* Add newly added addresses to the destination device and release
- * addresses that have no users left.
+ * addresses that have no users left. The source device must be
+ * locked by netif_tx_lock_bh.
*
* This function is intended to be called from the dev->set_rx_mode
* function of layered software devices.
{
int err = 0;
- ASSERT_RTNL();
-
if (to->addr_len != from->addr_len)
return -EINVAL;
+ netif_addr_lock_bh(to);
err = __hw_addr_sync(&to->uc, &from->uc, to->addr_len);
if (!err)
__dev_set_rx_mode(to);
+ netif_addr_unlock_bh(to);
return err;
}
EXPORT_SYMBOL(dev_unicast_sync);
*/
void dev_unicast_unsync(struct net_device *to, struct net_device *from)
{
- ASSERT_RTNL();
-
if (to->addr_len != from->addr_len)
return;
+ netif_addr_lock_bh(from);
+ netif_addr_lock(to);
__hw_addr_unsync(&to->uc, &from->uc, to->addr_len);
__dev_set_rx_mode(to);
+ netif_addr_unlock(to);
+ netif_addr_unlock_bh(from);
}
EXPORT_SYMBOL(dev_unicast_unsync);
static void dev_unicast_flush(struct net_device *dev)
{
- /* rtnl_mutex must be held here */
-
+ netif_addr_lock_bh(dev);
__hw_addr_flush(&dev->uc);
+ netif_addr_unlock_bh(dev);
}
static void dev_unicast_init(struct net_device *dev)
{
- /* rtnl_mutex must be held here */
-
__hw_addr_init(&dev->uc);
}
struct gen_estimator
{
struct list_head list;
- struct gnet_stats_basic *bstats;
+ struct gnet_stats_basic_packed *bstats;
struct gnet_stats_rate_est *rate_est;
spinlock_t *stats_lock;
int ewma_log;
}
static
-struct gen_estimator *gen_find_node(const struct gnet_stats_basic *bstats,
+struct gen_estimator *gen_find_node(const struct gnet_stats_basic_packed *bstats,
const struct gnet_stats_rate_est *rate_est)
{
struct rb_node *p = est_root.rb_node;
*
* NOTE: Called under rtnl_mutex
*/
-int gen_new_estimator(struct gnet_stats_basic *bstats,
+int gen_new_estimator(struct gnet_stats_basic_packed *bstats,
struct gnet_stats_rate_est *rate_est,
spinlock_t *stats_lock,
struct nlattr *opt)
*
* NOTE: Called under rtnl_mutex
*/
-void gen_kill_estimator(struct gnet_stats_basic *bstats,
+void gen_kill_estimator(struct gnet_stats_basic_packed *bstats,
struct gnet_stats_rate_est *rate_est)
{
struct gen_estimator *e;
*
* Returns 0 on success or a negative error code.
*/
-int gen_replace_estimator(struct gnet_stats_basic *bstats,
+int gen_replace_estimator(struct gnet_stats_basic_packed *bstats,
struct gnet_stats_rate_est *rate_est,
spinlock_t *stats_lock, struct nlattr *opt)
{
*
* Returns true if estimator is active, and false if not.
*/
-bool gen_estimator_active(const struct gnet_stats_basic *bstats,
+bool gen_estimator_active(const struct gnet_stats_basic_packed *bstats,
const struct gnet_stats_rate_est *rate_est)
{
ASSERT_RTNL();
* if the room in the socket buffer was not sufficient.
*/
int
-gnet_stats_copy_basic(struct gnet_dump *d, struct gnet_stats_basic *b)
+gnet_stats_copy_basic(struct gnet_dump *d, struct gnet_stats_basic_packed *b)
{
if (d->compat_tc_stats) {
d->tc_stats.bytes = b->bytes;
d->tc_stats.packets = b->packets;
}
- if (d->tail)
- return gnet_stats_copy(d, TCA_STATS_BASIC, b, sizeof(*b));
+ if (d->tail) {
+ struct gnet_stats_basic sb;
+ memset(&sb, 0, sizeof(sb));
+ sb.bytes = b->bytes;
+ sb.packets = b->packets;
+ return gnet_stats_copy(d, TCA_STATS_BASIC, &sb, sizeof(sb));
+ }
return 0;
}
*/
ng->len = id;
- memcpy(&ng->ptr, &old_ng->ptr, old_ng->len);
+ memcpy(&ng->ptr, &old_ng->ptr, old_ng->len * sizeof(void*));
rcu_assign_pointer(net->gen, ng);
call_rcu(&old_ng->rcu, net_generic_release);
udelay(USEC_PER_POLL);
}
+
+ WARN_ONCE(!irqs_disabled(),
+ "netpoll_send_skb(): %s enabled interrupts in poll (%pF)\n",
+ dev->name, ops->ndo_start_xmit);
+
local_irq_restore(flags);
}
case SO_TIMESTAMPING:
if (val & ~SOF_TIMESTAMPING_MASK) {
- ret = EINVAL;
+ ret = -EINVAL;
break;
}
sock_valbool_flag(sk, SOCK_TIMESTAMPING_TX_HARDWARE,
af_family_keys + sk->sk_family);
}
+/*
+ * Copy all fields from osk to nsk but nsk->sk_refcnt must not change yet,
+ * even temporarly, because of RCU lookups. sk_node should also be left as is.
+ */
static void sock_copy(struct sock *nsk, const struct sock *osk)
{
#ifdef CONFIG_SECURITY_NETWORK
void *sptr = nsk->sk_security;
#endif
-
- memcpy(nsk, osk, osk->sk_prot->obj_size);
+ BUILD_BUG_ON(offsetof(struct sock, sk_copy_start) !=
+ sizeof(osk->sk_node) + sizeof(osk->sk_refcnt));
+ memcpy(&nsk->sk_copy_start, &osk->sk_copy_start,
+ osk->sk_prot->obj_size - offsetof(struct sock, sk_copy_start));
#ifdef CONFIG_SECURITY_NETWORK
nsk->sk_security = sptr;
security_sk_clone(osk, nsk);
struct kmem_cache *slab;
slab = prot->slab;
- if (slab != NULL)
- sk = kmem_cache_alloc(slab, priority);
+ if (slab != NULL) {
+ sk = kmem_cache_alloc(slab, priority & ~__GFP_ZERO);
+ if (!sk)
+ return sk;
+ if (priority & __GFP_ZERO) {
+ /*
+ * caches using SLAB_DESTROY_BY_RCU should let
+ * sk_node.next un-modified. Special care is taken
+ * when initializing object to zero.
+ */
+ if (offsetof(struct sock, sk_node.next) != 0)
+ memset(sk, 0, offsetof(struct sock, sk_node.next));
+ memset(&sk->sk_node.pprev, 0,
+ prot->obj_size - offsetof(struct sock,
+ sk_node.pprev));
+ }
+ }
else
sk = kmalloc(prot->obj_size, priority);
sk->sk_prot = sk->sk_prot_creator = prot;
sock_lock_init(sk);
sock_net_set(sk, get_net(net));
+ atomic_set(&sk->sk_wmem_alloc, 1);
}
return sk;
newsk->sk_err = 0;
newsk->sk_priority = 0;
+ /*
+ * Before updating sk_refcnt, we must commit prior changes to memory
+ * (Documentation/RCU/rculist_nulls.txt for details)
+ */
+ smp_wmb();
atomic_set(&newsk->sk_refcnt, 2);
/*
sk->sk_stamp = ktime_set(-1L, 0);
+ /*
+ * Before updating sk_refcnt, we must commit prior changes to memory
+ * (Documentation/RCU/rculist_nulls.txt for details)
+ */
+ smp_wmb();
atomic_set(&sk->sk_refcnt, 1);
- atomic_set(&sk->sk_wmem_alloc, 1);
atomic_set(&sk->sk_drops, 0);
}
EXPORT_SYMBOL(sock_init_data);
(dccp_hashinfo.ehash_size - 1))
dccp_hashinfo.ehash_size--;
dccp_hashinfo.ehash = (struct inet_ehash_bucket *)
- __get_free_pages(GFP_ATOMIC, ehash_order);
+ __get_free_pages(GFP_ATOMIC|__GFP_NOWARN, ehash_order);
} while (!dccp_hashinfo.ehash && --ehash_order > 0);
if (!dccp_hashinfo.ehash) {
bhash_order > 0)
continue;
dccp_hashinfo.bhash = (struct inet_bind_hashbucket *)
- __get_free_pages(GFP_ATOMIC, bhash_order);
+ __get_free_pages(GFP_ATOMIC|__GFP_NOWARN, bhash_order);
} while (!dccp_hashinfo.bhash && --bhash_order >= 0);
if (!dccp_hashinfo.bhash) {
kmem_cache_destroy(dccp_hashinfo.bind_bucket_cachep);
dccp_ackvec_exit();
dccp_sysctl_exit();
+ percpu_counter_destroy(&dccp_orphan_count);
}
module_init(dccp_init);
if (peer)
return -EOPNOTSUPP;
+ memset(sec, 0, sizeof(*sec));
mutex_lock(&econet_mutex);
sk = sock->sk;
unsigned int cmd)
{
struct ifreq ifr;
- int ret = -EINVAL;
+ int ret = -ENOIOCTLCMD;
struct net_device *dev;
if (copy_from_user(&ifr, arg, sizeof(struct ifreq)))
dev_load(sock_net(sk), ifr.ifr_name);
dev = dev_get_by_name(sock_net(sk), ifr.ifr_name);
- if (dev->type == ARPHRD_IEEE802154 ||
- dev->type == ARPHRD_IEEE802154_PHY)
+
+ if ((dev->type == ARPHRD_IEEE802154 ||
+ dev->type == ARPHRD_IEEE802154_PHY) &&
+ dev->netdev_ops->ndo_do_ioctl)
ret = dev->netdev_ops->ndo_do_ioctl(dev, &ifr, cmd);
if (!ret && copy_to_user(arg, &ifr, sizeof(struct ifreq)))
return ret;
}
+static int dgram_getsockopt(struct sock *sk, int level, int optname,
+ char __user *optval, int __user *optlen)
+{
+ return -EOPNOTSUPP;
+}
+
+static int dgram_setsockopt(struct sock *sk, int level, int optname,
+ char __user *optval, int __user optlen)
+{
+ return -EOPNOTSUPP;
+}
+
struct proto ieee802154_dgram_prot = {
.name = "IEEE-802.15.4-MAC",
.owner = THIS_MODULE,
.connect = dgram_connect,
.disconnect = dgram_disconnect,
.ioctl = dgram_ioctl,
+ .getsockopt = dgram_getsockopt,
+ .setsockopt = dgram_setsockopt,
};
read_unlock(&raw_lock);
}
+static int raw_getsockopt(struct sock *sk, int level, int optname,
+ char __user *optval, int __user *optlen)
+{
+ return -EOPNOTSUPP;
+}
+
+static int raw_setsockopt(struct sock *sk, int level, int optname,
+ char __user *optval, int __user optlen)
+{
+ return -EOPNOTSUPP;
+}
+
struct proto ieee802154_raw_prot = {
.name = "IEEE-802.15.4-RAW",
.owner = THIS_MODULE,
.unhash = raw_unhash,
.connect = raw_connect,
.disconnect = raw_disconnect,
+ .getsockopt = raw_getsockopt,
+ .setsockopt = raw_setsockopt,
};
hbuffer[k++] = hex_asc_lo(n->ha[j]);
hbuffer[k++] = ':';
}
- hbuffer[--k] = 0;
+ if (k != 0)
+ --k;
+ hbuffer[k] = 0;
#if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
}
#endif
}
tos = tiph->tos;
- if (tos&1) {
+ if (tos == 1) {
+ tos = 0;
if (skb->protocol == htons(ETH_P_IP))
tos = old_iph->tos;
- tos &= ~1;
}
{
addend += 4;
}
dev->needed_headroom = addend + hlen;
- mtu -= dev->hard_header_len - addend;
+ mtu -= dev->hard_header_len + addend;
if (mtu < 68)
mtu = 68;
inet->cork.addr = ipc->addr;
}
rt = *rtp;
+ if (unlikely(!rt))
+ return -EFAULT;
/*
* We steal reference to this route, caller should not release it
*/
skb->len += tmp_skb->len;
skb->data_len += tmp_skb->len;
skb->truesize += tmp_skb->truesize;
- __sock_put(tmp_skb->sk);
tmp_skb->destructor = NULL;
tmp_skb->sk = NULL;
}
spin_lock(&tcp_cong_list_lock);
ca = tcp_ca_find(name);
#ifdef CONFIG_MODULES
- if (!ca && capable(CAP_SYS_MODULE)) {
+ if (!ca && capable(CAP_NET_ADMIN)) {
spin_unlock(&tcp_cong_list_lock);
request_module("tcp_%s", name);
#ifdef CONFIG_MODULES
/* not found attempt to autoload module */
- if (!ca && capable(CAP_SYS_MODULE)) {
+ if (!ca && capable(CAP_NET_ADMIN)) {
rcu_read_unlock();
request_module("tcp_%s", name);
rcu_read_lock();
#ifdef CONFIG_TCP_MD5SIG
static struct tcp_request_sock_ops tcp_request_sock_ipv4_ops = {
.md5_lookup = tcp_v4_reqsk_md5_lookup,
+ .calc_md5_hash = tcp_v4_md5_hash_skb,
};
#endif
*/
char *newkey = kmemdup(key->key, key->keylen, GFP_ATOMIC);
if (newkey != NULL)
- tcp_v4_md5_do_add(newsk, inet_sk(sk)->daddr,
+ tcp_v4_md5_do_add(newsk, newinet->daddr,
newkey, key->keylen);
newsk->sk_route_caps &= ~NETIF_F_GSO_MASK;
}
#ifdef CONFIG_TCP_MD5SIG
/* Okay, we have all we need - do the md5 hash if needed */
if (md5) {
- tp->af_specific->calc_md5_hash(md5_hash_location,
+ tcp_rsk(req)->af_specific->calc_md5_hash(md5_hash_location,
md5, NULL, req, skb);
}
#endif
v4addr != htonl(INADDR_ANY) &&
chk_addr_ret != RTN_LOCAL &&
chk_addr_ret != RTN_MULTICAST &&
- chk_addr_ret != RTN_BROADCAST)
+ chk_addr_ret != RTN_BROADCAST) {
+ err = -EADDRNOTAVAIL;
goto out;
+ }
} else {
if (addr_type != IPV6_ADDR_ANY) {
struct net_device *dev = NULL;
skb->len += tmp_skb->len;
skb->data_len += tmp_skb->len;
skb->truesize += tmp_skb->truesize;
- __sock_put(tmp_skb->sk);
tmp_skb->destructor = NULL;
tmp_skb->sk = NULL;
}
dev->hard_header_len = LL_MAX_HEADER + sizeof(struct iphdr);
dev->mtu = ETH_DATA_LEN - sizeof(struct iphdr);
dev->flags = IFF_NOARP;
+ dev->priv_flags &= ~IFF_XMIT_DST_RELEASE;
dev->iflink = 0;
dev->addr_len = 4;
dev->features |= NETIF_F_NETNS_LOCAL;
#ifdef CONFIG_TCP_MD5SIG
static struct tcp_request_sock_ops tcp_request_sock_ipv6_ops = {
.md5_lookup = tcp_v6_reqsk_md5_lookup,
+ .calc_md5_hash = tcp_v6_md5_hash_skb,
};
#endif
*/
char *newkey = kmemdup(key->key, key->keylen, GFP_ATOMIC);
if (newkey != NULL)
- tcp_v6_md5_do_add(newsk, &inet6_sk(sk)->daddr,
+ tcp_v6_md5_do_add(newsk, &newnp->daddr,
newkey, key->keylen);
}
#endif
struct sock *sk = sock->sk;
struct irda_sock *self = irda_sk(sk);
+ memset(&saddr, 0, sizeof(saddr));
if (peer) {
if (sk->sk_state != TCP_ESTABLISHED)
return -ENOTCONN;
}
/* Dup */
memcpy(new, orig, sizeof(struct tsap_cb));
+ spin_lock_init(&new->lock);
/* We don't need the old instance any more */
spin_unlock_irqrestore(&irttp->tsaps->hb_spinlock, flags);
struct llc_sock *llc = llc_sk(sk);
int rc = 0;
+ memset(&sllc, 0, sizeof(sllc));
lock_sock(sk);
if (sock_flag(sk, SOCK_ZAPPED))
goto out;
config MAC80211_MESH
bool "Enable mac80211 mesh networking (pre-802.11s) support"
depends on MAC80211 && EXPERIMENTAL
+ depends on BROKEN
---help---
This options enables support of Draft 802.11s mesh networking.
The implementation is based on Draft 1.08 of the Mesh Networking
&local->hw, queue,
IEEE80211_QUEUE_STOP_REASON_AGGREGATION);
+ if (!(sta->ampdu_mlme.tid_state_tx[tid] & HT_ADDBA_REQUESTED_MSK))
+ return;
+
+ if (WARN(!sta->ampdu_mlme.tid_tx[tid],
+ "TID %d gone but expected when splicing aggregates from"
+ "the pending queue\n", tid))
+ return;
+
if (!skb_queue_empty(&sta->ampdu_mlme.tid_tx[tid]->pending)) {
spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
/* mark queue as pending, it is stopped already */
*
* @key: key to add to do item for
* @flag: todo flag(s)
+ *
+ * Must be called with IRQs or softirqs disabled.
*/
static void add_todo(struct ieee80211_key *key, u32 flag)
{
ret = drv_set_key(key->local, SET_KEY, &sdata->vif, sta, &key->conf);
if (!ret) {
- spin_lock(&todo_lock);
+ spin_lock_bh(&todo_lock);
key->flags |= KEY_FLAG_UPLOADED_TO_HARDWARE;
- spin_unlock(&todo_lock);
+ spin_unlock_bh(&todo_lock);
}
if (ret && ret != -ENOSPC && ret != -EOPNOTSUPP)
if (!key || !key->local->ops->set_key)
return;
- spin_lock(&todo_lock);
+ spin_lock_bh(&todo_lock);
if (!(key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE)) {
- spin_unlock(&todo_lock);
+ spin_unlock_bh(&todo_lock);
return;
}
- spin_unlock(&todo_lock);
+ spin_unlock_bh(&todo_lock);
sta = get_sta_for_key(key);
sdata = key->sdata;
wiphy_name(key->local->hw.wiphy),
key->conf.keyidx, sta ? sta->addr : bcast_addr, ret);
- spin_lock(&todo_lock);
+ spin_lock_bh(&todo_lock);
key->flags &= ~KEY_FLAG_UPLOADED_TO_HARDWARE;
- spin_unlock(&todo_lock);
+ spin_unlock_bh(&todo_lock);
}
static void __ieee80211_set_default_key(struct ieee80211_sub_if_data *sdata,
__ieee80211_key_replace(sdata, sta, old_key, key);
- spin_unlock_irqrestore(&sdata->local->key_lock, flags);
-
/* free old key later */
add_todo(old_key, KEY_FLAG_TODO_DELETE);
add_todo(key, KEY_FLAG_TODO_ADD_DEBUGFS);
if (netif_running(sdata->dev))
add_todo(key, KEY_FLAG_TODO_HWACCEL_ADD);
+
+ spin_unlock_irqrestore(&sdata->local->key_lock, flags);
}
static void __ieee80211_key_free(struct ieee80211_key *key)
*/
synchronize_rcu();
- spin_lock(&todo_lock);
+ spin_lock_bh(&todo_lock);
while (!list_empty(&todo_list)) {
key = list_first_entry(&todo_list, struct ieee80211_key, todo);
list_del_init(&key->todo);
KEY_FLAG_TODO_HWACCEL_REMOVE |
KEY_FLAG_TODO_DELETE);
key->flags &= ~todoflags;
- spin_unlock(&todo_lock);
+ spin_unlock_bh(&todo_lock);
work_done = false;
WARN_ON(!work_done);
- spin_lock(&todo_lock);
+ spin_lock_bh(&todo_lock);
}
- spin_unlock(&todo_lock);
+ spin_unlock_bh(&todo_lock);
}
void ieee80211_key_todo(void)
int err = 0;
u32 hash_idx;
+ might_sleep();
+
if (memcmp(dst, sdata->dev->dev_addr, ETH_ALEN) == 0)
/* never add ourselves as neighbours */
return -ENOTSUPP;
int err = 0;
u32 hash_idx;
+ might_sleep();
if (memcmp(dst, sdata->dev->dev_addr, ETH_ALEN) == 0)
/* never add ourselves as neighbours */
* @skb: frame to discard
* @sdata: network subif the frame was to be sent through
*
- * If the frame was beign forwarded from another MP, a PERR frame will be sent
- * to the precursor.
+ * If the frame was being forwarded from another MP, a PERR frame will be sent
+ * to the precursor. The precursor's address (i.e. the previous hop) was saved
+ * in addr1 of the frame-to-be-forwarded, and would only be overwritten once
+ * the destination is successfully resolved.
*
* Locking: the function must me called within a rcu_read_lock region
*/
u8 *ra, *da;
da = hdr->addr3;
- ra = hdr->addr2;
+ ra = hdr->addr1;
mpath = mesh_path_lookup(da, sdata);
if (mpath)
dsn = ++mpath->dsn;
{
struct ieee80211_local *local = (void *) data;
- if (local->quiescing)
+ if (local->quiescing || local->suspended)
return;
queue_work(local->hw.workqueue, &local->dynamic_ps_enable_work);
rcu_read_unlock();
- /* flush again, in case driver queued work */
- flush_workqueue(local->hw.workqueue);
-
- /* stop hardware - this must stop RX */
- if (local->open_count) {
- ieee80211_led_radio(local, false);
- drv_stop(local);
- }
-
/* remove STAs */
spin_lock_irqsave(&local->sta_lock, flags);
list_for_each_entry(sta, &local->sta_list, list) {
drv_remove_interface(local, &conf);
}
+ /* stop hardware - this must stop RX */
+ if (local->open_count) {
+ ieee80211_led_radio(local, false);
+ drv_stop(local);
+ }
+
+ /*
+ * flush again, in case driver queued work -- it
+ * shouldn't be doing (or cancel everything in the
+ * stop callback) that but better safe than sorry.
+ */
+ flush_workqueue(local->hw.workqueue);
+
local->suspended = true;
+ /* need suspended to be visible before quiescing is false */
+ barrier();
local->quiescing = false;
return 0;
return;
}
+ /*
+ * If we're suspending, it is possible although not too likely
+ * that we'd be receiving frames after having already partially
+ * quiesced the stack. We can't process such frames then since
+ * that might, for example, cause stations to be added or other
+ * driver callbacks be invoked.
+ */
+ if (unlikely(local->quiescing || local->suspended)) {
+ kfree_skb(skb);
+ return;
+ }
+
if (status->flag & RX_FLAG_HT) {
/* rate_idx is MCS index */
if (WARN_ON(status->rate_idx < 0 ||
monitor_iface = UNKNOWN_ADDRESS;
len_rthdr = ieee80211_get_radiotap_len(skb->data);
- hdr = (struct ieee80211_hdr *)skb->data + len_rthdr;
+ hdr = (struct ieee80211_hdr *)(skb->data + len_rthdr);
hdrlen = ieee80211_hdrlen(hdr->frame_control);
/* check the header is complete in the frame */
}
}
- ct = kmem_cache_zalloc(nf_conntrack_cachep, gfp);
+ /*
+ * Do not use kmem_cache_zalloc(), as this cache uses
+ * SLAB_DESTROY_BY_RCU.
+ */
+ ct = kmem_cache_alloc(nf_conntrack_cachep, gfp);
if (ct == NULL) {
pr_debug("nf_conntrack_alloc: Can't alloc conntrack.\n");
atomic_dec(&net->ct.count);
return ERR_PTR(-ENOMEM);
}
-
+ /*
+ * Let ct->tuplehash[IP_CT_DIR_ORIGINAL].hnnode.next
+ * and ct->tuplehash[IP_CT_DIR_REPLY].hnnode.next unchanged.
+ */
+ memset(&ct->tuplehash[IP_CT_DIR_MAX], 0,
+ sizeof(*ct) - offsetof(struct nf_conn, tuplehash[IP_CT_DIR_MAX]));
spin_lock_init(&ct->lock);
- atomic_set(&ct->ct_general.use, 1);
ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple = *orig;
+ ct->tuplehash[IP_CT_DIR_ORIGINAL].hnnode.pprev = NULL;
ct->tuplehash[IP_CT_DIR_REPLY].tuple = *repl;
+ ct->tuplehash[IP_CT_DIR_REPLY].hnnode.pprev = NULL;
/* Don't set timer yet: wait for confirmation */
setup_timer(&ct->timeout, death_by_timeout, (unsigned long)ct);
#ifdef CONFIG_NET_NS
ct->ct_net = net;
#endif
+ /*
+ * changes to lookup keys must be done before setting refcnt to 1
+ */
+ smp_wmb();
+ atomic_set(&ct->ct_general.use, 1);
return ct;
}
EXPORT_SYMBOL_GPL(nf_conntrack_alloc);
xt_rateest_tg(struct sk_buff *skb, const struct xt_target_param *par)
{
const struct xt_rateest_target_info *info = par->targinfo;
- struct gnet_stats_basic *stats = &info->est->bstats;
+ struct gnet_stats_basic_packed *stats = &info->est->bstats;
spin_lock_bh(&info->est->lock);
stats->bytes += skb->len;
fcount++;
if (info->flags & XT_OSF_LOG)
- nf_log_packet(p->hooknum, 0, skb, p->in, p->out, NULL,
+ nf_log_packet(p->family, p->hooknum, skb,
+ p->in, p->out, NULL,
"%s [%s:%s] : %pi4:%d -> %pi4:%d hops=%d\n",
f->genre, f->version, f->subtype,
&ip->saddr, ntohs(tcp->source),
rcu_read_unlock();
if (!fcount && (info->flags & XT_OSF_LOG))
- nf_log_packet(p->hooknum, 0, skb, p->in, p->out, NULL,
+ nf_log_packet(p->family, p->hooknum, skb, p->in, p->out, NULL,
"Remote OS is not known: %pi4:%u -> %pi4:%u\n",
&ip->saddr, ntohs(tcp->source),
&ip->daddr, ntohs(tcp->dest));
q->master = kmalloc(sizeof(*q->master), GFP_KERNEL);
if (q->master == NULL)
- return -ENOMEM;
+ return false;
q->master->quota = q->quota;
return true;
addr6 = addr;
mask6 = mask;
map6 = kzalloc(sizeof(*map6), GFP_ATOMIC);
- if (map4 == NULL)
+ if (map6 == NULL)
goto cfg_unlbl_map_add_failure;
map6->type = NETLBL_NLTYPE_UNLABELED;
ipv6_addr_copy(&map6->list.addr, addr6);
sax->fsa_ax25.sax25_family = AF_NETROM;
sax->fsa_ax25.sax25_ndigis = 1;
sax->fsa_ax25.sax25_call = nr->user_addr;
+ memset(sax->fsa_digipeater, 0, sizeof(sax->fsa_digipeater));
sax->fsa_digipeater[0] = nr->dest_addr;
*uaddr_len = sizeof(struct full_sockaddr_ax25);
} else {
return dev;
}
-static ax25_digi *nr_call_to_digi(int ndigis, ax25_address *digipeaters)
+static ax25_digi *nr_call_to_digi(ax25_digi *digi, int ndigis,
+ ax25_address *digipeaters)
{
- static ax25_digi ax25_digi;
int i;
if (ndigis == 0)
return NULL;
for (i = 0; i < ndigis; i++) {
- ax25_digi.calls[i] = digipeaters[i];
- ax25_digi.repeated[i] = 0;
+ digi->calls[i] = digipeaters[i];
+ digi->repeated[i] = 0;
}
- ax25_digi.ndigi = ndigis;
- ax25_digi.lastrepeat = -1;
+ digi->ndigi = ndigis;
+ digi->lastrepeat = -1;
- return &ax25_digi;
+ return digi;
}
/*
{
struct nr_route_struct nr_route;
struct net_device *dev;
+ ax25_digi digi;
int ret;
switch (cmd) {
ret = nr_add_node(&nr_route.callsign,
nr_route.mnemonic,
&nr_route.neighbour,
- nr_call_to_digi(nr_route.ndigis, nr_route.digipeaters),
+ nr_call_to_digi(&digi, nr_route.ndigis,
+ nr_route.digipeaters),
dev, nr_route.quality,
nr_route.obs_count);
break;
case NETROM_NEIGH:
ret = nr_add_neigh(&nr_route.callsign,
- nr_call_to_digi(nr_route.ndigis, nr_route.digipeaters),
+ nr_call_to_digi(&digi, nr_route.ndigis,
+ nr_route.digipeaters),
dev, nr_route.quality);
break;
default:
{
struct phonet_device_list *pndevs = phonet_device_list(net);
struct phonet_device *pnd;
- struct net_device *dev;
+ struct net_device *dev = NULL;
spin_lock_bh(&pndevs->lock);
list_for_each_entry(pnd, &pndevs->list, list) {
swprev = !!(rfkill->state & RFKILL_BLOCK_SW);
hwprev = !!(rfkill->state & RFKILL_BLOCK_HW);
__rfkill_set_sw_state(rfkill, sw);
+ if (hw)
+ rfkill->state |= RFKILL_BLOCK_HW;
+ else
+ rfkill->state &= ~RFKILL_BLOCK_HW;
spin_unlock_irqrestore(&rfkill->lock, flags);
struct device_attribute *attr,
const char *buf, size_t count)
{
- /*
- * The intention was that userspace can only take control over
- * a given device when/if rfkill-input doesn't control it due
- * to user_claim. Since user_claim is currently unsupported,
- * we never support changing the state from userspace -- this
- * can be implemented again later.
- */
+ struct rfkill *rfkill = to_rfkill(dev);
+ unsigned long state;
+ int err;
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ err = strict_strtoul(buf, 0, &state);
+ if (err)
+ return err;
+
+ if (state != RFKILL_USER_STATE_SOFT_BLOCKED &&
+ state != RFKILL_USER_STATE_UNBLOCKED)
+ return -EINVAL;
+
+ mutex_lock(&rfkill_global_mutex);
+ rfkill_set_block(rfkill, state == RFKILL_USER_STATE_SOFT_BLOCKED);
+ mutex_unlock(&rfkill_global_mutex);
- return -EPERM;
+ return err ?: count;
}
static ssize_t rfkill_claim_show(struct device *dev,
/*
* Convert a ROSE address into text.
*/
-const char *rose2asc(const rose_address *addr)
+char *rose2asc(char *buf, const rose_address *addr)
{
- static char buffer[11];
-
if (addr->rose_addr[0] == 0x00 && addr->rose_addr[1] == 0x00 &&
addr->rose_addr[2] == 0x00 && addr->rose_addr[3] == 0x00 &&
addr->rose_addr[4] == 0x00) {
- strcpy(buffer, "*");
+ strcpy(buf, "*");
} else {
- sprintf(buffer, "%02X%02X%02X%02X%02X", addr->rose_addr[0] & 0xFF,
+ sprintf(buf, "%02X%02X%02X%02X%02X", addr->rose_addr[0] & 0xFF,
addr->rose_addr[1] & 0xFF,
addr->rose_addr[2] & 0xFF,
addr->rose_addr[3] & 0xFF,
addr->rose_addr[4] & 0xFF);
}
- return buffer;
+ return buf;
}
/*
struct rose_sock *rose = rose_sk(sk);
int n;
+ memset(srose, 0, sizeof(*srose));
if (peer != 0) {
if (sk->sk_state != TCP_ESTABLISHED)
return -ENOTCONN;
static int rose_info_show(struct seq_file *seq, void *v)
{
- char buf[11];
+ char buf[11], rsbuf[11];
if (v == SEQ_START_TOKEN)
seq_puts(seq,
devname = dev->name;
seq_printf(seq, "%-10s %-9s ",
- rose2asc(&rose->dest_addr),
- ax2asc(buf, &rose->dest_call));
+ rose2asc(rsbuf, &rose->dest_addr),
+ ax2asc(buf, &rose->dest_call));
if (ax25cmp(&rose->source_call, &null_ax25_address) == 0)
callsign = "??????-?";
seq_printf(seq,
"%-10s %-9s %-5s %3.3X %05d %d %d %d %d %3lu %3lu %3lu %3lu %3lu %3lu/%03lu %5d %5d %ld\n",
- rose2asc(&rose->source_addr),
+ rose2asc(rsbuf, &rose->source_addr),
callsign,
devname,
rose->lci & 0x0FFF,
static int rose_node_show(struct seq_file *seq, void *v)
{
+ char rsbuf[11];
int i;
if (v == SEQ_START_TOKEN)
const struct rose_node *rose_node = v;
/* if (rose_node->loopback) {
seq_printf(seq, "%-10s %04d 1 loopback\n",
- rose2asc(&rose_node->address),
- rose_node->mask);
+ rose2asc(rsbuf, &rose_node->address),
+ rose_node->mask);
} else { */
seq_printf(seq, "%-10s %04d %d",
- rose2asc(&rose_node->address),
- rose_node->mask,
- rose_node->count);
+ rose2asc(rsbuf, &rose_node->address),
+ rose_node->mask,
+ rose_node->count);
for (i = 0; i < rose_node->count; i++)
seq_printf(seq, " %05d",
static int rose_route_show(struct seq_file *seq, void *v)
{
- char buf[11];
+ char buf[11], rsbuf[11];
if (v == SEQ_START_TOKEN)
seq_puts(seq,
seq_printf(seq,
"%3.3X %-10s %-9s %05d ",
rose_route->lci1,
- rose2asc(&rose_route->src_addr),
+ rose2asc(rsbuf, &rose_route->src_addr),
ax2asc(buf, &rose_route->src_call),
rose_route->neigh1->number);
else
if (rose_route->neigh2)
seq_printf(seq,
"%3.3X %-10s %-9s %05d\n",
- rose_route->lci2,
- rose2asc(&rose_route->dest_addr),
- ax2asc(buf, &rose_route->dest_call),
- rose_route->neigh2->number);
+ rose_route->lci2,
+ rose2asc(rsbuf, &rose_route->dest_addr),
+ ax2asc(buf, &rose_route->dest_call),
+ rose_route->neigh2->number);
else
seq_puts(seq,
"000 * * 00000\n");
nlh = NLMSG_NEW(skb, pid, seq, event, sizeof(*tcm), flags);
tcm = NLMSG_DATA(nlh);
tcm->tcm_family = AF_UNSPEC;
+ tcm->tcm__pad1 = 0;
+ tcm->tcm__pad2 = 0;
tcm->tcm_ifindex = qdisc_dev(q)->ifindex;
tcm->tcm_parent = q->handle;
tcm->tcm_handle = q->handle;
struct socket *sock; /* for closing */
u32 classid; /* x:y type ID */
int ref; /* reference count */
- struct gnet_stats_basic bstats;
+ struct gnet_stats_basic_packed bstats;
struct gnet_stats_queue qstats;
struct atm_flow_data *next;
struct atm_flow_data *excess; /* flow for excess traffic;
long avgidle;
long deficit; /* Saved deficit for WRR */
psched_time_t penalized;
- struct gnet_stats_basic bstats;
+ struct gnet_stats_basic_packed bstats;
struct gnet_stats_queue qstats;
struct gnet_stats_rate_est rate_est;
struct tc_cbq_xstats xstats;
unsigned int refcnt;
unsigned int filter_cnt;
- struct gnet_stats_basic bstats;
+ struct gnet_stats_basic_packed bstats;
struct gnet_stats_queue qstats;
struct gnet_stats_rate_est rate_est;
struct list_head alist;
struct Qdisc_class_common cl_common;
unsigned int refcnt; /* usage count */
- struct gnet_stats_basic bstats;
+ struct gnet_stats_basic_packed bstats;
struct gnet_stats_queue qstats;
struct gnet_stats_rate_est rate_est;
unsigned int level; /* class level in hierarchy */
struct htb_class {
struct Qdisc_class_common common;
/* general class parameters */
- struct gnet_stats_basic bstats;
+ struct gnet_stats_basic_packed bstats;
struct gnet_stats_queue qstats;
struct gnet_stats_rate_est rate_est;
struct tc_htb_xstats xstats; /* our special stats */
remove_proc_entry("sctp", init_net.proc_net);
}
#endif
+ percpu_counter_destroy(&sctp_sockets_allocated);
}
/* Private helper to extract ipv4 address and stash them in
if (more)
flags |= MSG_MORE;
- return sock->ops->sendpage(sock, page, offset, size, flags);
+ return kernel_sendpage(sock, page, offset, size, flags);
}
static ssize_t sock_splice_read(struct file *file, loff_t *ppos,
rpc_task_force_reencode(struct rpc_task *task)
{
task->tk_rqstp->rq_snd_buf.len = 0;
+ task->tk_rqstp->rq_bytes_sent = 0;
}
static inline void
if (IS_ERR(hdr)) {
err = PTR_ERR(hdr);
- goto out;
+ goto free_msg;
}
cookie.msg = msg;
&cookie, get_key_callback);
if (err)
- goto out;
+ goto free_msg;
if (cookie.error)
goto nla_put_failure;
nla_put_failure:
err = -ENOBUFS;
+ free_msg:
nlmsg_free(msg);
out:
cfg80211_put_dev(drv);
chan->beacon_found = true;
+ if (wiphy->disable_beacon_hints)
+ return;
+
chan_before.center_freq = chan->center_freq;
chan_before.flags = chan->flags;
- if ((chan->flags & IEEE80211_CHAN_PASSIVE_SCAN) &&
- !(chan->orig_flags & IEEE80211_CHAN_PASSIVE_SCAN)) {
+ if (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN) {
chan->flags &= ~IEEE80211_CHAN_PASSIVE_SCAN;
channel_changed = true;
}
- if ((chan->flags & IEEE80211_CHAN_NO_IBSS) &&
- !(chan->orig_flags & IEEE80211_CHAN_NO_IBSS)) {
+ if (chan->flags & IEEE80211_CHAN_NO_IBSS) {
chan->flags &= ~IEEE80211_CHAN_NO_IBSS;
channel_changed = true;
}
* non-radar 5 GHz channels.
*
* Drivers do not need to call this, cfg80211 will do it for after a scan
- * on a newly found BSS.
+ * on a newly found BSS. If you cannot make use of this feature you can
+ * set the wiphy->disable_beacon_hints to true.
*/
int regulatory_hint_found_beacon(struct wiphy *wiphy,
struct ieee80211_channel *beacon_chan,
else
nl80211_send_scan_done(wiphy_to_dev(request->wiphy), dev);
- wiphy_to_dev(request->wiphy)->scan_req = NULL;
-
#ifdef CONFIG_WIRELESS_EXT
if (!aborted) {
memset(&wrqu, 0, sizeof(wrqu));
dev_put(dev);
out:
+ wiphy_to_dev(request->wiphy)->scan_req = NULL;
kfree(request);
}
EXPORT_SYMBOL(cfg80211_scan_done);
if (!ie1 && !ie2)
return 0;
- if (!ie1)
+ if (!ie1 || !ie2)
return -1;
r = memcmp(ie1 + 2, ie2 + 2, min(ie1[1], ie2[1]));
ie = find_ie(WLAN_EID_MESH_CONFIG,
a->information_elements,
a->len_information_elements);
+ if (!ie)
+ return false;
if (ie[1] != IEEE80211_MESH_CONFIG_LEN)
return false;
static inline unsigned int __xfrm4_daddr_saddr_hash(xfrm_address_t *daddr, xfrm_address_t *saddr)
{
- return ntohl(daddr->a4 ^ saddr->a4);
+ return ntohl(daddr->a4 + saddr->a4);
}
static inline unsigned int __xfrm6_daddr_saddr_hash(xfrm_address_t *daddr, xfrm_address_t *saddr)
-/*
- * Notice that this file is not protected like a normal header.
- * We also must allow for rereading of this file. The
- *
- * || defined(TRACE_HEADER_MULTI_READ)
- *
- * serves this purpose.
- */
-#if !defined(_TRACE_EVENT_SAMPLE_H) || defined(TRACE_HEADER_MULTI_READ)
-#define _TRACE_EVENT_SAMPLE_H
-
-/*
- * All trace headers should include tracepoint.h, until we finally
- * make it into a standard header.
- */
-#include <linux/tracepoint.h>
-
/*
* If TRACE_SYSTEM is defined, that will be the directory created
* in the ftrace directory under /debugfs/tracing/events/<system>
* #define TRACE_INCLUDE_FILE trace-events-sample
*
* As we do an the bottom of this file.
+ *
+ * Notice that TRACE_SYSTEM should be defined outside of #if
+ * protection, just like TRACE_INCLUDE_FILE.
*/
#undef TRACE_SYSTEM
#define TRACE_SYSTEM sample
+/*
+ * Notice that this file is not protected like a normal header.
+ * We also must allow for rereading of this file. The
+ *
+ * || defined(TRACE_HEADER_MULTI_READ)
+ *
+ * serves this purpose.
+ */
+#if !defined(_TRACE_EVENT_SAMPLE_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_EVENT_SAMPLE_H
+
+/*
+ * All trace headers should include tracepoint.h, until we finally
+ * make it into a standard header.
+ */
+#include <linux/tracepoint.h>
+
/*
* The TRACE_EVENT macro is broken up into 5 parts.
*
use strict;
my $P = $0;
-my $V = '0.16';
+my $V = '0.17';
use Getopt::Long qw(:config no_auto_abbrev);
my $email_git_penguin_chiefs = 0;
my $email_git_min_signatures = 1;
my $email_git_max_maintainers = 5;
+my $email_git_min_percent = 5;
my $email_git_since = "1-year-ago";
my $output_multiline = 1;
my $output_separator = ", ";
'git-chief-penguins!' => \$email_git_penguin_chiefs,
'git-min-signatures=i' => \$email_git_min_signatures,
'git-max-maintainers=i' => \$email_git_max_maintainers,
+ 'git-min-percent=i' => \$email_git_min_percent,
'git-since=s' => \$email_git_since,
'm!' => \$email_maintainer,
'n!' => \$email_usename,
$value =~ s@\.@\\\.@g; ##Convert . to \.
$value =~ s/\*/\.\*/g; ##Convert * to .*
$value =~ s/\?/\./g; ##Convert ? to .
+ ##if pattern is a directory and it lacks a trailing slash, add one
+ if ((-d $value)) {
+ $value =~ s@([^/])$@$1/@;
+ }
}
push(@typevalue, "$type:$value");
} elsif (!/^(\s)*$/) {
my @files = ();
foreach my $file (@ARGV) {
- next if ((-d $file));
- if (!(-f $file)) {
+ ##if $file is a directory and it lacks a trailing slash, add one
+ if ((-d $file)) {
+ $file =~ s@([^/])$@$1/@;
+ } elsif (!(-f $file)) {
die "$P: file '${file}' not found\n";
}
if ($from_filename) {
sub usage {
print <<EOT;
usage: $P [options] patchfile
- $P [options] -f file
+ $P [options] -f file|directory
version: $V
MAINTAINER field selection options:
--git-chief-penguins => include ${penguin_chiefs}
--git-min-signatures => number of signatures required (default: 1)
--git-max-maintainers => maximum maintainers to add (default: 5)
+ --git-min-percent => minimum percentage of commits required (default: 5)
--git-since => git history to use (default: 1-year-ago)
--m => include maintainer(s) if any
--n => include name 'Full Name <addr\@domain.tld>'
--version => show version
--help => show this help information
+Notes:
+ Using "-f directory" may give unexpected results:
+
+ Used with "--git", git signators for _all_ files in and below
+ directory are examined as git recurses directories.
+ Any specified X: (exclude) pattern matches are _not_ ignored.
+ Used with "--nogit", directory is used as a pattern match,
+ no individual file within the directory or subdirectory
+ is matched.
EOT
}
my $output = "";
my $count = 0;
my @lines = ();
+ my $total_sign_offs;
if (which("git") eq "") {
warn("$P: git not found. Add --nogit to options?\n");
$output =~ s/^\s*//gm;
@lines = split("\n", $output);
+
+ $total_sign_offs = 0;
+ foreach my $line (@lines) {
+ if ($line =~ m/([0-9]+)\s+(.*)/) {
+ $total_sign_offs += $1;
+ } else {
+ die("$P: Unexpected git output: ${line}\n");
+ }
+ }
+
foreach my $line (@lines) {
if ($line =~ m/([0-9]+)\s+(.*)/) {
my $sign_offs = $1;
$line = $2;
$count++;
if ($sign_offs < $email_git_min_signatures ||
- $count > $email_git_max_maintainers) {
+ $count > $email_git_max_maintainers ||
+ $sign_offs * 100 / $total_sign_offs < $email_git_min_percent) {
last;
}
- } else {
- die("$P: Unexpected git output: ${line}\n");
}
if ($line =~ m/(.+)<(.+)>/) {
my $git_name = $1;
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <stdarg.h>
+
#include "dialog.h"
struct dialog_info dlg;
single_menu_mode = 1;
}
+ initscr();
+
getyx(stdscr, saved_y, saved_x);
if (init_dialog(NULL)) {
fprintf(stderr, N_("Your display is too small to run Menuconfig!\n"));
#!/usr/bin/perl
use File::Basename;
+use Math::BigInt;
# Copyright 2008, Intel Corporation
#
parse_x86_regs($line);
}
-my $decodestart = hex($target) - hex($func_offset);
-my $decodestop = hex($target) + 8192;
+my $decodestart = Math::BigInt->from_hex("0x$target") - Math::BigInt->from_hex("0x$func_offset");
+my $decodestop = Math::BigInt->from_hex("0x$target") + 8192;
if ($target eq "0") {
print "No oops found!\n";
print "Usage: \n";
set -e
# Pass maintainer script parameters to hook scripts
-export DEB_MAINT_PARAMS="\$@"
+export DEB_MAINT_PARAMS="\$*"
test -d $debhookdir/$script.d && run-parts --arg="$version" $debhookdir/$script.d
exit 0
$read_function = 0;
}
# print out any recorded offsets
- update_funcs() if ($text_found);
+ update_funcs() if (defined($ref_func));
# reset all markers and arrays
$text_found = 0;
# section found, now is this a start of a function?
} elsif ($read_function && /$function_regex/) {
$text_found = 1;
- $offset = hex $1;
$text = $2;
# if this is either a local function or a weak function
if (!defined($locals{$text}) && !defined($weak{$text})) {
$ref_func = $text;
$read_function = 0;
+ $offset = hex $1;
} else {
# if we already have a function, and this is weak, skip it
- if (!defined($ref_func) || !defined($weak{$text})) {
+ if (!defined($ref_func) && !defined($weak{$text}) &&
+ # PPC64 can have symbols that start with .L and
+ # gcc considers these special. Don't use them!
+ $text !~ /^\.L/) {
$ref_func = $text;
+ $offset = hex $1;
}
}
} elsif ($read_headers && /$mcount_section/) {
}
# dump out anymore offsets that may have been found
-update_funcs() if ($text_found);
+update_funcs() if (defined($ref_func));
# If we did not find any mcount callers, we are done (do nothing).
if (!$opened) {
If you are unsure how to answer this question, answer N.
+config LSM_MMAP_MIN_ADDR
+ int "Low address space for LSM to protect from user allocation"
+ depends on SECURITY && SECURITY_SELINUX
+ default 65536
+ help
+ This is the portion of low virtual memory which should be protected
+ from userspace allocation. Keeping a user from writing to low pages
+ can help reduce the impact of kernel NULL pointer bugs.
+
+ For most ia64, ppc64 and x86 users with lots of address space
+ a value of 65536 is reasonable and should cause no problems.
+ On arm and other archs it should not be higher than 32768.
+ Programs which use vm86 functionality or have some need to map
+ this low address space will need the permission specific to the
+ systems running LSM.
+
source security/selinux/Kconfig
source security/smack/Kconfig
source security/tomoyo/Kconfig
subdir-$(CONFIG_SECURITY_TOMOYO) += tomoyo
# always enable default capabilities
-obj-y += commoncap.o
+obj-y += commoncap.o min_addr.o
# Object file lists
obj-$(CONFIG_SECURITY) += security.o capability.o
# Must precede capability.o in order to stack properly.
obj-$(CONFIG_SECURITY_SELINUX) += selinux/built-in.o
obj-$(CONFIG_SECURITY_SMACK) += smack/built-in.o
-ifeq ($(CONFIG_AUDIT),y)
-obj-$(CONFIG_SECURITY_SMACK) += lsm_audit.o
-endif
+obj-$(CONFIG_AUDIT) += lsm_audit.o
obj-$(CONFIG_SECURITY_TOMOYO) += tomoyo/built-in.o
obj-$(CONFIG_SECURITY_ROOTPLUG) += root_plug.o
obj-$(CONFIG_CGROUP_DEVICE) += device_cgroup.o
return 0;
}
-static int cap_file_mmap(struct file *file, unsigned long reqprot,
- unsigned long prot, unsigned long flags,
- unsigned long addr, unsigned long addr_only)
-{
- if ((addr < mmap_min_addr) && !capable(CAP_SYS_RAWIO))
- return -EACCES;
- return 0;
-}
-
static int cap_file_mprotect(struct vm_area_struct *vma, unsigned long reqprot,
unsigned long prot)
{
return 0;
}
+static int cap_cred_alloc_blank(struct cred *cred, gfp_t gfp)
+{
+ return 0;
+}
+
static void cap_cred_free(struct cred *cred)
{
}
{
}
+static void cap_cred_transfer(struct cred *new, const struct cred *old)
+{
+}
+
static int cap_kernel_act_as(struct cred *new, u32 secid)
{
return 0;
return 0;
}
+static int cap_kernel_module_request(void)
+{
+ return 0;
+}
+
static int cap_task_setuid(uid_t id0, uid_t id1, uid_t id2, int flags)
{
return 0;
{
}
+
+
static void cap_req_classify_flow(const struct request_sock *req,
struct flowi *fl)
{
}
+
+static int cap_tun_dev_create(void)
+{
+ return 0;
+}
+
+static void cap_tun_dev_post_create(struct sock *sk)
+{
+}
+
+static int cap_tun_dev_attach(struct sock *sk)
+{
+ return 0;
+}
#endif /* CONFIG_SECURITY_NETWORK */
#ifdef CONFIG_SECURITY_NETWORK_XFRM
{
}
+static int cap_inode_notifysecctx(struct inode *inode, void *ctx, u32 ctxlen)
+{
+ return 0;
+}
+
+static int cap_inode_setsecctx(struct dentry *dentry, void *ctx, u32 ctxlen)
+{
+ return 0;
+}
+
+static int cap_inode_getsecctx(struct inode *inode, void **ctx, u32 *ctxlen)
+{
+ return 0;
+}
#ifdef CONFIG_KEYS
static int cap_key_alloc(struct key *key, const struct cred *cred,
unsigned long flags)
return 0;
}
+static int cap_key_session_to_parent(const struct cred *cred,
+ const struct cred *parent_cred,
+ struct key *key)
+{
+ return 0;
+}
+
#endif /* CONFIG_KEYS */
#ifdef CONFIG_AUDIT
void security_fixup_ops(struct security_operations *ops)
{
- set_to_cap_if_null(ops, ptrace_may_access);
+ set_to_cap_if_null(ops, ptrace_access_check);
set_to_cap_if_null(ops, ptrace_traceme);
set_to_cap_if_null(ops, capget);
set_to_cap_if_null(ops, capset);
set_to_cap_if_null(ops, file_receive);
set_to_cap_if_null(ops, dentry_open);
set_to_cap_if_null(ops, task_create);
+ set_to_cap_if_null(ops, cred_alloc_blank);
set_to_cap_if_null(ops, cred_free);
set_to_cap_if_null(ops, cred_prepare);
set_to_cap_if_null(ops, cred_commit);
+ set_to_cap_if_null(ops, cred_transfer);
set_to_cap_if_null(ops, kernel_act_as);
set_to_cap_if_null(ops, kernel_create_files_as);
+ set_to_cap_if_null(ops, kernel_module_request);
set_to_cap_if_null(ops, task_setuid);
set_to_cap_if_null(ops, task_fix_setuid);
set_to_cap_if_null(ops, task_setgid);
set_to_cap_if_null(ops, secid_to_secctx);
set_to_cap_if_null(ops, secctx_to_secid);
set_to_cap_if_null(ops, release_secctx);
+ set_to_cap_if_null(ops, inode_notifysecctx);
+ set_to_cap_if_null(ops, inode_setsecctx);
+ set_to_cap_if_null(ops, inode_getsecctx);
#ifdef CONFIG_SECURITY_NETWORK
set_to_cap_if_null(ops, unix_stream_connect);
set_to_cap_if_null(ops, unix_may_send);
set_to_cap_if_null(ops, inet_csk_clone);
set_to_cap_if_null(ops, inet_conn_established);
set_to_cap_if_null(ops, req_classify_flow);
+ set_to_cap_if_null(ops, tun_dev_create);
+ set_to_cap_if_null(ops, tun_dev_post_create);
+ set_to_cap_if_null(ops, tun_dev_attach);
#endif /* CONFIG_SECURITY_NETWORK */
#ifdef CONFIG_SECURITY_NETWORK_XFRM
set_to_cap_if_null(ops, xfrm_policy_alloc_security);
set_to_cap_if_null(ops, key_free);
set_to_cap_if_null(ops, key_permission);
set_to_cap_if_null(ops, key_getsecurity);
+ set_to_cap_if_null(ops, key_session_to_parent);
#endif /* CONFIG_KEYS */
#ifdef CONFIG_AUDIT
set_to_cap_if_null(ops, audit_rule_init);
}
/**
- * cap_ptrace_may_access - Determine whether the current process may access
+ * cap_ptrace_access_check - Determine whether the current process may access
* another
* @child: The process to be accessed
* @mode: The mode of attachment.
* Determine whether a process may access another, returning 0 if permission
* granted, -ve if denied.
*/
-int cap_ptrace_may_access(struct task_struct *child, unsigned int mode)
+int cap_ptrace_access_check(struct task_struct *child, unsigned int mode)
{
int ret = 0;
cap_sys_admin = 1;
return __vm_enough_memory(mm, pages, cap_sys_admin);
}
+
+/*
+ * cap_file_mmap - check if able to map given addr
+ * @file: unused
+ * @reqprot: unused
+ * @prot: unused
+ * @flags: unused
+ * @addr: address attempting to be mapped
+ * @addr_only: unused
+ *
+ * If the process is attempting to map memory below mmap_min_addr they need
+ * CAP_SYS_RAWIO. The other parameters to this function are unused by the
+ * capability security module. Returns 0 if this mapping should be allowed
+ * -EPERM if not.
+ */
+int cap_file_mmap(struct file *file, unsigned long reqprot,
+ unsigned long prot, unsigned long flags,
+ unsigned long addr, unsigned long addr_only)
+{
+ int ret = 0;
+
+ if (addr < dac_mmap_min_addr) {
+ ret = cap_capable(current, current_cred(), CAP_SYS_RAWIO,
+ SECURITY_CAP_AUDIT);
+ /* set PF_SUPERPRIV if it turns out we allow the low mmap */
+ if (ret == 0)
+ current->flags |= PF_SUPERPRIV;
+ }
+ return ret;
+}
{
struct hash_desc desc;
struct scatterlist sg[1];
- loff_t i_size;
+ loff_t i_size, offset = 0;
char *rbuf;
- int rc, offset = 0;
+ int rc;
rc = init_desc(&desc);
if (rc != 0)
rc = rbuf_len;
break;
}
+ if (rbuf_len == 0)
+ break;
offset += rbuf_len;
sg_init_one(sg, rbuf, rbuf_len);
struct inode *inode = path->dentry->d_inode;
struct ima_iint_cache *iint;
- if (!ima_initialized || !S_ISREG(inode->i_mode))
+ /* The inode may already have been freed, freeing the iint
+ * with it. Verify the inode is not NULL before dereferencing
+ * it.
+ */
+ if (!ima_initialized || !inode || !S_ISREG(inode->i_mode))
return;
iint = ima_iint_find_insert_get(inode);
if (!iint)
else if (mask & (MAY_READ | MAY_EXEC))
iint->readcount--;
mutex_unlock(&iint->mutex);
+
+ kref_put(&iint->refcount, iint_free);
}
/*
if (file->f_mode & FMODE_WRITE)
iint->writecount++;
mutex_unlock(&iint->mutex);
+
+ kref_put(&iint->refcount, iint_free);
}
EXPORT_SYMBOL_GPL(ima_counts_get);
#
obj-y := \
+ gc.o \
key.o \
keyring.o \
keyctl.o \
case KEYCTL_GET_SECURITY:
return keyctl_get_security(arg2, compat_ptr(arg3), arg4);
+ case KEYCTL_SESSION_TO_PARENT:
+ return keyctl_session_to_parent();
+
default:
return -EOPNOTSUPP;
}
--- /dev/null
+/* Key garbage collector
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <keys/keyring-type.h>
+#include "internal.h"
+
+/*
+ * Delay between key revocation/expiry in seconds
+ */
+unsigned key_gc_delay = 5 * 60;
+
+/*
+ * Reaper
+ */
+static void key_gc_timer_func(unsigned long);
+static void key_garbage_collector(struct work_struct *);
+static DEFINE_TIMER(key_gc_timer, key_gc_timer_func, 0, 0);
+static DECLARE_WORK(key_gc_work, key_garbage_collector);
+static key_serial_t key_gc_cursor; /* the last key the gc considered */
+static unsigned long key_gc_executing;
+static time_t key_gc_next_run = LONG_MAX;
+
+/*
+ * Schedule a garbage collection run
+ * - precision isn't particularly important
+ */
+void key_schedule_gc(time_t gc_at)
+{
+ unsigned long expires;
+ time_t now = current_kernel_time().tv_sec;
+
+ kenter("%ld", gc_at - now);
+
+ gc_at += key_gc_delay;
+
+ if (now >= gc_at) {
+ schedule_work(&key_gc_work);
+ } else if (gc_at < key_gc_next_run) {
+ expires = jiffies + (gc_at - now) * HZ;
+ mod_timer(&key_gc_timer, expires);
+ }
+}
+
+/*
+ * The garbage collector timer kicked off
+ */
+static void key_gc_timer_func(unsigned long data)
+{
+ kenter("");
+ key_gc_next_run = LONG_MAX;
+ schedule_work(&key_gc_work);
+}
+
+/*
+ * Garbage collect pointers from a keyring
+ * - return true if we altered the keyring
+ */
+static bool key_gc_keyring(struct key *keyring, time_t limit)
+ __releases(key_serial_lock)
+{
+ struct keyring_list *klist;
+ struct key *key;
+ int loop;
+
+ kenter("%x", key_serial(keyring));
+
+ if (test_bit(KEY_FLAG_REVOKED, &keyring->flags))
+ goto dont_gc;
+
+ /* scan the keyring looking for dead keys */
+ klist = rcu_dereference(keyring->payload.subscriptions);
+ if (!klist)
+ goto dont_gc;
+
+ for (loop = klist->nkeys - 1; loop >= 0; loop--) {
+ key = klist->keys[loop];
+ if (test_bit(KEY_FLAG_DEAD, &key->flags) ||
+ (key->expiry > 0 && key->expiry <= limit))
+ goto do_gc;
+ }
+
+dont_gc:
+ kleave(" = false");
+ return false;
+
+do_gc:
+ key_gc_cursor = keyring->serial;
+ key_get(keyring);
+ spin_unlock(&key_serial_lock);
+ keyring_gc(keyring, limit);
+ key_put(keyring);
+ kleave(" = true");
+ return true;
+}
+
+/*
+ * Garbage collector for keys
+ * - this involves scanning the keyrings for dead, expired and revoked keys
+ * that have overstayed their welcome
+ */
+static void key_garbage_collector(struct work_struct *work)
+{
+ struct rb_node *rb;
+ key_serial_t cursor;
+ struct key *key, *xkey;
+ time_t new_timer = LONG_MAX, limit;
+
+ kenter("");
+
+ if (test_and_set_bit(0, &key_gc_executing)) {
+ key_schedule_gc(current_kernel_time().tv_sec);
+ return;
+ }
+
+ limit = current_kernel_time().tv_sec;
+ if (limit > key_gc_delay)
+ limit -= key_gc_delay;
+ else
+ limit = key_gc_delay;
+
+ spin_lock(&key_serial_lock);
+
+ if (RB_EMPTY_ROOT(&key_serial_tree))
+ goto reached_the_end;
+
+ cursor = key_gc_cursor;
+ if (cursor < 0)
+ cursor = 0;
+
+ /* find the first key above the cursor */
+ key = NULL;
+ rb = key_serial_tree.rb_node;
+ while (rb) {
+ xkey = rb_entry(rb, struct key, serial_node);
+ if (cursor < xkey->serial) {
+ key = xkey;
+ rb = rb->rb_left;
+ } else if (cursor > xkey->serial) {
+ rb = rb->rb_right;
+ } else {
+ rb = rb_next(rb);
+ if (!rb)
+ goto reached_the_end;
+ key = rb_entry(rb, struct key, serial_node);
+ break;
+ }
+ }
+
+ if (!key)
+ goto reached_the_end;
+
+ /* trawl through the keys looking for keyrings */
+ for (;;) {
+ if (key->expiry > 0 && key->expiry < new_timer)
+ new_timer = key->expiry;
+
+ if (key->type == &key_type_keyring &&
+ key_gc_keyring(key, limit)) {
+ /* the gc ate our lock */
+ schedule_work(&key_gc_work);
+ goto no_unlock;
+ }
+
+ rb = rb_next(&key->serial_node);
+ if (!rb) {
+ key_gc_cursor = 0;
+ break;
+ }
+ key = rb_entry(rb, struct key, serial_node);
+ }
+
+out:
+ spin_unlock(&key_serial_lock);
+no_unlock:
+ clear_bit(0, &key_gc_executing);
+ if (new_timer < LONG_MAX)
+ key_schedule_gc(new_timer);
+
+ kleave("");
+ return;
+
+reached_the_end:
+ key_gc_cursor = 0;
+ goto out;
+}
struct key *dest_keyring,
unsigned long flags);
-extern key_ref_t lookup_user_key(key_serial_t id, int create, int partial,
+extern key_ref_t lookup_user_key(key_serial_t id, unsigned long flags,
key_perm_t perm);
+#define KEY_LOOKUP_CREATE 0x01
+#define KEY_LOOKUP_PARTIAL 0x02
+#define KEY_LOOKUP_FOR_UNLINK 0x04
extern long join_session_keyring(const char *name);
+extern unsigned key_gc_delay;
+extern void keyring_gc(struct key *keyring, time_t limit);
+extern void key_schedule_gc(time_t expiry_at);
+
/*
* check to see whether permission is granted to use a key in the desired way
*/
extern long keyctl_assume_authority(key_serial_t);
extern long keyctl_get_security(key_serial_t keyid, char __user *buffer,
size_t buflen);
+extern long keyctl_session_to_parent(void);
/*
* debugging key validation
set_bit(KEY_FLAG_INSTANTIATED, &key->flags);
now = current_kernel_time();
key->expiry = now.tv_sec + timeout;
+ key_schedule_gc(key->expiry);
if (test_and_clear_bit(KEY_FLAG_USER_CONSTRUCT, &key->flags))
awaken = 1;
goto error;
found:
- /* pretend it doesn't exist if it's dead */
- if (atomic_read(&key->usage) == 0 ||
- test_bit(KEY_FLAG_DEAD, &key->flags) ||
- key->type == &key_type_dead)
+ /* pretend it doesn't exist if it is awaiting deletion */
+ if (atomic_read(&key->usage) == 0)
goto not_found;
/* this races with key_put(), but that doesn't matter since key_put()
*/
void key_revoke(struct key *key)
{
+ struct timespec now;
+ time_t time;
+
key_check(key);
/* make sure no one's trying to change or use the key when we mark it
key->type->revoke)
key->type->revoke(key);
+ /* set the death time to no more than the expiry time */
+ now = current_kernel_time();
+ time = now.tv_sec;
+ if (key->revoked_at == 0 || key->revoked_at > time) {
+ key->revoked_at = time;
+ key_schedule_gc(key->revoked_at);
+ }
+
up_write(&key->sem);
} /* end key_revoke() */
for (_n = rb_first(&key_serial_tree); _n; _n = rb_next(_n)) {
key = rb_entry(_n, struct key, serial_node);
- if (key->type == ktype)
+ if (key->type == ktype) {
key->type = &key_type_dead;
+ set_bit(KEY_FLAG_DEAD, &key->flags);
+ }
}
spin_unlock(&key_serial_lock);
spin_unlock(&key_serial_lock);
up_write(&key_types_sem);
+ key_schedule_gc(0);
+
} /* end unregister_key_type() */
EXPORT_SYMBOL(unregister_key_type);
}
/* find the target keyring (which must be writable) */
- keyring_ref = lookup_user_key(ringid, 1, 0, KEY_WRITE);
+ keyring_ref = lookup_user_key(ringid, KEY_LOOKUP_CREATE, KEY_WRITE);
if (IS_ERR(keyring_ref)) {
ret = PTR_ERR(keyring_ref);
goto error3;
/* get the destination keyring if specified */
dest_ref = NULL;
if (destringid) {
- dest_ref = lookup_user_key(destringid, 1, 0, KEY_WRITE);
+ dest_ref = lookup_user_key(destringid, KEY_LOOKUP_CREATE,
+ KEY_WRITE);
if (IS_ERR(dest_ref)) {
ret = PTR_ERR(dest_ref);
goto error3;
long keyctl_get_keyring_ID(key_serial_t id, int create)
{
key_ref_t key_ref;
+ unsigned long lflags;
long ret;
- key_ref = lookup_user_key(id, create, 0, KEY_SEARCH);
+ lflags = create ? KEY_LOOKUP_CREATE : 0;
+ key_ref = lookup_user_key(id, lflags, KEY_SEARCH);
if (IS_ERR(key_ref)) {
ret = PTR_ERR(key_ref);
goto error;
}
/* find the target key (which must be writable) */
- key_ref = lookup_user_key(id, 0, 0, KEY_WRITE);
+ key_ref = lookup_user_key(id, 0, KEY_WRITE);
if (IS_ERR(key_ref)) {
ret = PTR_ERR(key_ref);
goto error2;
key_ref_t key_ref;
long ret;
- key_ref = lookup_user_key(id, 0, 0, KEY_WRITE);
+ key_ref = lookup_user_key(id, 0, KEY_WRITE);
if (IS_ERR(key_ref)) {
ret = PTR_ERR(key_ref);
- goto error;
+ if (ret != -EACCES)
+ goto error;
+ key_ref = lookup_user_key(id, 0, KEY_SETATTR);
+ if (IS_ERR(key_ref)) {
+ ret = PTR_ERR(key_ref);
+ goto error;
+ }
}
key_revoke(key_ref_to_ptr(key_ref));
key_ref_t keyring_ref;
long ret;
- keyring_ref = lookup_user_key(ringid, 1, 0, KEY_WRITE);
+ keyring_ref = lookup_user_key(ringid, KEY_LOOKUP_CREATE, KEY_WRITE);
if (IS_ERR(keyring_ref)) {
ret = PTR_ERR(keyring_ref);
goto error;
key_ref_t keyring_ref, key_ref;
long ret;
- keyring_ref = lookup_user_key(ringid, 1, 0, KEY_WRITE);
+ keyring_ref = lookup_user_key(ringid, KEY_LOOKUP_CREATE, KEY_WRITE);
if (IS_ERR(keyring_ref)) {
ret = PTR_ERR(keyring_ref);
goto error;
}
- key_ref = lookup_user_key(id, 1, 0, KEY_LINK);
+ key_ref = lookup_user_key(id, KEY_LOOKUP_CREATE, KEY_LINK);
if (IS_ERR(key_ref)) {
ret = PTR_ERR(key_ref);
goto error2;
key_ref_t keyring_ref, key_ref;
long ret;
- keyring_ref = lookup_user_key(ringid, 0, 0, KEY_WRITE);
+ keyring_ref = lookup_user_key(ringid, 0, KEY_WRITE);
if (IS_ERR(keyring_ref)) {
ret = PTR_ERR(keyring_ref);
goto error;
}
- key_ref = lookup_user_key(id, 0, 0, 0);
+ key_ref = lookup_user_key(id, KEY_LOOKUP_FOR_UNLINK, 0);
if (IS_ERR(key_ref)) {
ret = PTR_ERR(key_ref);
goto error2;
char *tmpbuf;
long ret;
- key_ref = lookup_user_key(keyid, 0, 1, KEY_VIEW);
+ key_ref = lookup_user_key(keyid, KEY_LOOKUP_PARTIAL, KEY_VIEW);
if (IS_ERR(key_ref)) {
/* viewing a key under construction is permitted if we have the
* authorisation token handy */
if (!IS_ERR(instkey)) {
key_put(instkey);
key_ref = lookup_user_key(keyid,
- 0, 1, 0);
+ KEY_LOOKUP_PARTIAL,
+ 0);
if (!IS_ERR(key_ref))
goto okay;
}
}
/* get the keyring at which to begin the search */
- keyring_ref = lookup_user_key(ringid, 0, 0, KEY_SEARCH);
+ keyring_ref = lookup_user_key(ringid, 0, KEY_SEARCH);
if (IS_ERR(keyring_ref)) {
ret = PTR_ERR(keyring_ref);
goto error2;
/* get the destination keyring if specified */
dest_ref = NULL;
if (destringid) {
- dest_ref = lookup_user_key(destringid, 1, 0, KEY_WRITE);
+ dest_ref = lookup_user_key(destringid, KEY_LOOKUP_CREATE,
+ KEY_WRITE);
if (IS_ERR(dest_ref)) {
ret = PTR_ERR(dest_ref);
goto error3;
long ret;
/* find the key first */
- key_ref = lookup_user_key(keyid, 0, 0, 0);
+ key_ref = lookup_user_key(keyid, 0, 0);
if (IS_ERR(key_ref)) {
ret = -ENOKEY;
goto error;
if (uid == (uid_t) -1 && gid == (gid_t) -1)
goto error;
- key_ref = lookup_user_key(id, 1, 1, KEY_SETATTR);
+ key_ref = lookup_user_key(id, KEY_LOOKUP_CREATE | KEY_LOOKUP_PARTIAL,
+ KEY_SETATTR);
if (IS_ERR(key_ref)) {
ret = PTR_ERR(key_ref);
goto error;
if (perm & ~(KEY_POS_ALL | KEY_USR_ALL | KEY_GRP_ALL | KEY_OTH_ALL))
goto error;
- key_ref = lookup_user_key(id, 1, 1, KEY_SETATTR);
+ key_ref = lookup_user_key(id, KEY_LOOKUP_CREATE | KEY_LOOKUP_PARTIAL,
+ KEY_SETATTR);
if (IS_ERR(key_ref)) {
ret = PTR_ERR(key_ref);
goto error;
/* if a specific keyring is nominated by ID, then use that */
if (ringid > 0) {
- dkref = lookup_user_key(ringid, 1, 0, KEY_WRITE);
+ dkref = lookup_user_key(ringid, KEY_LOOKUP_CREATE, KEY_WRITE);
if (IS_ERR(dkref))
return PTR_ERR(dkref);
*_dest_keyring = key_ref_to_ptr(dkref);
time_t expiry;
long ret;
- key_ref = lookup_user_key(id, 1, 1, KEY_SETATTR);
+ key_ref = lookup_user_key(id, KEY_LOOKUP_CREATE | KEY_LOOKUP_PARTIAL,
+ KEY_SETATTR);
if (IS_ERR(key_ref)) {
ret = PTR_ERR(key_ref);
goto error;
}
key->expiry = expiry;
+ key_schedule_gc(key->expiry);
up_write(&key->sem);
key_put(key);
char *context;
long ret;
- key_ref = lookup_user_key(keyid, 0, 1, KEY_VIEW);
+ key_ref = lookup_user_key(keyid, KEY_LOOKUP_PARTIAL, KEY_VIEW);
if (IS_ERR(key_ref)) {
if (PTR_ERR(key_ref) != -EACCES)
return PTR_ERR(key_ref);
return PTR_ERR(key_ref);
key_put(instkey);
- key_ref = lookup_user_key(keyid, 0, 1, 0);
+ key_ref = lookup_user_key(keyid, KEY_LOOKUP_PARTIAL, 0);
if (IS_ERR(key_ref))
return PTR_ERR(key_ref);
}
return ret;
}
+/*
+ * attempt to install the calling process's session keyring on the process's
+ * parent process
+ * - the keyring must exist and must grant us LINK permission
+ * - implements keyctl(KEYCTL_SESSION_TO_PARENT)
+ */
+long keyctl_session_to_parent(void)
+{
+ struct task_struct *me, *parent;
+ const struct cred *mycred, *pcred;
+ struct cred *cred, *oldcred;
+ key_ref_t keyring_r;
+ int ret;
+
+ keyring_r = lookup_user_key(KEY_SPEC_SESSION_KEYRING, 0, KEY_LINK);
+ if (IS_ERR(keyring_r))
+ return PTR_ERR(keyring_r);
+
+ /* our parent is going to need a new cred struct, a new tgcred struct
+ * and new security data, so we allocate them here to prevent ENOMEM in
+ * our parent */
+ ret = -ENOMEM;
+ cred = cred_alloc_blank();
+ if (!cred)
+ goto error_keyring;
+
+ cred->tgcred->session_keyring = key_ref_to_ptr(keyring_r);
+ keyring_r = NULL;
+
+ me = current;
+ write_lock_irq(&tasklist_lock);
+
+ parent = me->real_parent;
+ ret = -EPERM;
+
+ /* the parent mustn't be init and mustn't be a kernel thread */
+ if (parent->pid <= 1 || !parent->mm)
+ goto not_permitted;
+
+ /* the parent must be single threaded */
+ if (atomic_read(&parent->signal->count) != 1)
+ goto not_permitted;
+
+ /* the parent and the child must have different session keyrings or
+ * there's no point */
+ mycred = current_cred();
+ pcred = __task_cred(parent);
+ if (mycred == pcred ||
+ mycred->tgcred->session_keyring == pcred->tgcred->session_keyring)
+ goto already_same;
+
+ /* the parent must have the same effective ownership and mustn't be
+ * SUID/SGID */
+ if (pcred-> uid != mycred->euid ||
+ pcred->euid != mycred->euid ||
+ pcred->suid != mycred->euid ||
+ pcred-> gid != mycred->egid ||
+ pcred->egid != mycred->egid ||
+ pcred->sgid != mycred->egid)
+ goto not_permitted;
+
+ /* the keyrings must have the same UID */
+ if (pcred ->tgcred->session_keyring->uid != mycred->euid ||
+ mycred->tgcred->session_keyring->uid != mycred->euid)
+ goto not_permitted;
+
+ /* the LSM must permit the replacement of the parent's keyring with the
+ * keyring from this process */
+ ret = security_key_session_to_parent(mycred, pcred,
+ key_ref_to_ptr(keyring_r));
+ if (ret < 0)
+ goto not_permitted;
+
+ /* if there's an already pending keyring replacement, then we replace
+ * that */
+ oldcred = parent->replacement_session_keyring;
+
+ /* the replacement session keyring is applied just prior to userspace
+ * restarting */
+ parent->replacement_session_keyring = cred;
+ cred = NULL;
+ set_ti_thread_flag(task_thread_info(parent), TIF_NOTIFY_RESUME);
+
+ write_unlock_irq(&tasklist_lock);
+ if (oldcred)
+ put_cred(oldcred);
+ return 0;
+
+already_same:
+ ret = 0;
+not_permitted:
+ put_cred(cred);
+ return ret;
+
+error_keyring:
+ key_ref_put(keyring_r);
+ return ret;
+}
+
/*****************************************************************************/
/*
* the key control system call
(char __user *) arg3,
(size_t) arg4);
+ case KEYCTL_SESSION_TO_PARENT:
+ return keyctl_session_to_parent();
+
default:
return -EOPNOTSUPP;
}
}
} /* end keyring_revoke() */
+
+/*
+ * Determine whether a key is dead
+ */
+static bool key_is_dead(struct key *key, time_t limit)
+{
+ return test_bit(KEY_FLAG_DEAD, &key->flags) ||
+ (key->expiry > 0 && key->expiry <= limit);
+}
+
+/*
+ * Collect garbage from the contents of a keyring
+ */
+void keyring_gc(struct key *keyring, time_t limit)
+{
+ struct keyring_list *klist, *new;
+ struct key *key;
+ int loop, keep, max;
+
+ kenter("%x", key_serial(keyring));
+
+ down_write(&keyring->sem);
+
+ klist = keyring->payload.subscriptions;
+ if (!klist)
+ goto just_return;
+
+ /* work out how many subscriptions we're keeping */
+ keep = 0;
+ for (loop = klist->nkeys - 1; loop >= 0; loop--)
+ if (!key_is_dead(klist->keys[loop], limit));
+ keep++;
+
+ if (keep == klist->nkeys)
+ goto just_return;
+
+ /* allocate a new keyring payload */
+ max = roundup(keep, 4);
+ new = kmalloc(sizeof(struct keyring_list) + max * sizeof(struct key *),
+ GFP_KERNEL);
+ if (!new)
+ goto just_return;
+ new->maxkeys = max;
+ new->nkeys = 0;
+ new->delkey = 0;
+
+ /* install the live keys
+ * - must take care as expired keys may be updated back to life
+ */
+ keep = 0;
+ for (loop = klist->nkeys - 1; loop >= 0; loop--) {
+ key = klist->keys[loop];
+ if (!key_is_dead(key, limit)) {
+ if (keep >= max)
+ goto discard_new;
+ new->keys[keep++] = key_get(key);
+ }
+ }
+ new->nkeys = keep;
+
+ /* adjust the quota */
+ key_payload_reserve(keyring,
+ sizeof(struct keyring_list) +
+ KEYQUOTA_LINK_BYTES * keep);
+
+ if (keep == 0) {
+ rcu_assign_pointer(keyring->payload.subscriptions, NULL);
+ kfree(new);
+ } else {
+ rcu_assign_pointer(keyring->payload.subscriptions, new);
+ }
+
+ up_write(&keyring->sem);
+
+ call_rcu(&klist->rcu, keyring_clear_rcu_disposal);
+ kleave(" [yes]");
+ return;
+
+discard_new:
+ new->nkeys = keep;
+ keyring_clear_rcu_disposal(&new->rcu);
+just_return:
+ up_write(&keyring->sem);
+ kleave(" [no]");
+}
*/
#ifdef CONFIG_KEYS_DEBUG_PROC_KEYS
-static struct rb_node *__key_serial_next(struct rb_node *n)
+static struct rb_node *key_serial_next(struct rb_node *n)
{
+ struct user_namespace *user_ns = current_user_ns();
+
+ n = rb_next(n);
while (n) {
struct key *key = rb_entry(n, struct key, serial_node);
- if (key->user->user_ns == current_user_ns())
+ if (key->user->user_ns == user_ns)
break;
n = rb_next(n);
}
return n;
}
-static struct rb_node *key_serial_next(struct rb_node *n)
+static int proc_keys_open(struct inode *inode, struct file *file)
{
- return __key_serial_next(rb_next(n));
+ return seq_open(file, &proc_keys_ops);
}
-static struct rb_node *key_serial_first(struct rb_root *r)
+static struct key *find_ge_key(key_serial_t id)
{
- struct rb_node *n = rb_first(r);
- return __key_serial_next(n);
-}
+ struct user_namespace *user_ns = current_user_ns();
+ struct rb_node *n = key_serial_tree.rb_node;
+ struct key *minkey = NULL;
-static int proc_keys_open(struct inode *inode, struct file *file)
-{
- return seq_open(file, &proc_keys_ops);
+ while (n) {
+ struct key *key = rb_entry(n, struct key, serial_node);
+ if (id < key->serial) {
+ if (!minkey || minkey->serial > key->serial)
+ minkey = key;
+ n = n->rb_left;
+ } else if (id > key->serial) {
+ n = n->rb_right;
+ } else {
+ minkey = key;
+ break;
+ }
+ key = NULL;
+ }
+ if (!minkey)
+ return NULL;
+
+ for (;;) {
+ if (minkey->user->user_ns == user_ns)
+ return minkey;
+ n = rb_next(&minkey->serial_node);
+ if (!n)
+ return NULL;
+ minkey = rb_entry(n, struct key, serial_node);
+ }
}
static void *proc_keys_start(struct seq_file *p, loff_t *_pos)
+ __acquires(key_serial_lock)
{
- struct rb_node *_p;
- loff_t pos = *_pos;
+ key_serial_t pos = *_pos;
+ struct key *key;
spin_lock(&key_serial_lock);
- _p = key_serial_first(&key_serial_tree);
- while (pos > 0 && _p) {
- pos--;
- _p = key_serial_next(_p);
- }
-
- return _p;
+ if (*_pos > INT_MAX)
+ return NULL;
+ key = find_ge_key(pos);
+ if (!key)
+ return NULL;
+ *_pos = key->serial;
+ return &key->serial_node;
+}
+static inline key_serial_t key_node_serial(struct rb_node *n)
+{
+ struct key *key = rb_entry(n, struct key, serial_node);
+ return key->serial;
}
static void *proc_keys_next(struct seq_file *p, void *v, loff_t *_pos)
{
- (*_pos)++;
- return key_serial_next((struct rb_node *) v);
+ struct rb_node *n;
+ n = key_serial_next(v);
+ if (n)
+ *_pos = key_node_serial(n);
+ return n;
}
static void proc_keys_stop(struct seq_file *p, void *v)
+ __releases(key_serial_lock)
{
spin_unlock(&key_serial_lock);
}
/* come up with a suitable timeout value */
if (key->expiry == 0) {
memcpy(xbuf, "perm", 5);
- }
- else if (now.tv_sec >= key->expiry) {
+ } else if (now.tv_sec >= key->expiry) {
memcpy(xbuf, "expd", 5);
- }
- else {
+ } else {
timo = key->expiry - now.tv_sec;
if (timo < 60)
seq_putc(m, '\n');
rcu_read_unlock();
-
return 0;
-
}
#endif /* CONFIG_KEYS_DEBUG_PROC_KEYS */
struct rb_node *n = rb_first(r);
return __key_user_next(n);
}
+
/*****************************************************************************/
/*
* implement "/proc/key-users" to provides a list of the key users
static int proc_key_users_open(struct inode *inode, struct file *file)
{
return seq_open(file, &proc_key_users_ops);
-
}
static void *proc_key_users_start(struct seq_file *p, loff_t *_pos)
+ __acquires(key_user_lock)
{
struct rb_node *_p;
loff_t pos = *_pos;
}
return _p;
-
}
static void *proc_key_users_next(struct seq_file *p, void *v, loff_t *_pos)
{
(*_pos)++;
return key_user_next((struct rb_node *) v);
-
}
static void proc_key_users_stop(struct seq_file *p, void *v)
+ __releases(key_user_lock)
{
spin_unlock(&key_user_lock);
}
#include <linux/fs.h>
#include <linux/err.h>
#include <linux/mutex.h>
+#include <linux/security.h>
#include <linux/user_namespace.h>
#include <asm/uaccess.h>
#include "internal.h"
* - don't create special keyrings unless so requested
* - partially constructed keys aren't found unless requested
*/
-key_ref_t lookup_user_key(key_serial_t id, int create, int partial,
+key_ref_t lookup_user_key(key_serial_t id, unsigned long lflags,
key_perm_t perm)
{
struct request_key_auth *rka;
switch (id) {
case KEY_SPEC_THREAD_KEYRING:
if (!cred->thread_keyring) {
- if (!create)
+ if (!(lflags & KEY_LOOKUP_CREATE))
goto error;
ret = install_thread_keyring();
case KEY_SPEC_PROCESS_KEYRING:
if (!cred->tgcred->process_keyring) {
- if (!create)
+ if (!(lflags & KEY_LOOKUP_CREATE))
goto error;
ret = install_process_keyring();
break;
}
- if (!partial) {
+ /* unlink does not use the nominated key in any way, so can skip all
+ * the permission checks as it is only concerned with the keyring */
+ if (lflags & KEY_LOOKUP_FOR_UNLINK) {
+ ret = 0;
+ goto error;
+ }
+
+ if (!(lflags & KEY_LOOKUP_PARTIAL)) {
ret = wait_for_key_construction(key, true);
switch (ret) {
case -ERESTARTSYS:
}
ret = -EIO;
- if (!partial && !test_bit(KEY_FLAG_INSTANTIATED, &key->flags))
+ if (!(lflags & KEY_LOOKUP_PARTIAL) &&
+ !test_bit(KEY_FLAG_INSTANTIATED, &key->flags))
goto invalid_key;
/* check the permissions */
/* only permit this if there's a single thread in the thread group -
* this avoids us having to adjust the creds on all threads and risking
* ENOMEM */
- if (!is_single_threaded(current))
+ if (!current_is_single_threaded())
return -EMLINK;
new = prepare_creds();
abort_creds(new);
return ret;
}
+
+/*
+ * Replace a process's session keyring when that process resumes userspace on
+ * behalf of one of its children
+ */
+void key_replace_session_keyring(void)
+{
+ const struct cred *old;
+ struct cred *new;
+
+ if (!current->replacement_session_keyring)
+ return;
+
+ write_lock_irq(&tasklist_lock);
+ new = current->replacement_session_keyring;
+ current->replacement_session_keyring = NULL;
+ write_unlock_irq(&tasklist_lock);
+
+ if (!new)
+ return;
+
+ old = current_cred();
+ new-> uid = old-> uid;
+ new-> euid = old-> euid;
+ new-> suid = old-> suid;
+ new->fsuid = old->fsuid;
+ new-> gid = old-> gid;
+ new-> egid = old-> egid;
+ new-> sgid = old-> sgid;
+ new->fsgid = old->fsgid;
+ new->user = get_uid(old->user);
+ new->group_info = get_group_info(old->group_info);
+
+ new->securebits = old->securebits;
+ new->cap_inheritable = old->cap_inheritable;
+ new->cap_permitted = old->cap_permitted;
+ new->cap_effective = old->cap_effective;
+ new->cap_bset = old->cap_bset;
+
+ new->jit_keyring = old->jit_keyring;
+ new->thread_keyring = key_get(old->thread_keyring);
+ new->tgcred->tgid = old->tgcred->tgid;
+ new->tgcred->process_keyring = key_get(old->tgcred->process_keyring);
+
+ security_transfer_creds(new, old);
+
+ commit_creds(new);
+}
#include <linux/sysctl.h>
#include "internal.h"
+static const int zero, one = 1, max = INT_MAX;
+
ctl_table key_sysctls[] = {
{
.ctl_name = CTL_UNNUMBERED,
.data = &key_quota_maxkeys,
.maxlen = sizeof(unsigned),
.mode = 0644,
- .proc_handler = &proc_dointvec,
+ .proc_handler = &proc_dointvec_minmax,
+ .extra1 = (void *) &one,
+ .extra2 = (void *) &max,
},
{
.ctl_name = CTL_UNNUMBERED,
.data = &key_quota_maxbytes,
.maxlen = sizeof(unsigned),
.mode = 0644,
- .proc_handler = &proc_dointvec,
+ .proc_handler = &proc_dointvec_minmax,
+ .extra1 = (void *) &one,
+ .extra2 = (void *) &max,
},
{
.ctl_name = CTL_UNNUMBERED,
.data = &key_quota_root_maxkeys,
.maxlen = sizeof(unsigned),
.mode = 0644,
- .proc_handler = &proc_dointvec,
+ .proc_handler = &proc_dointvec_minmax,
+ .extra1 = (void *) &one,
+ .extra2 = (void *) &max,
},
{
.ctl_name = CTL_UNNUMBERED,
.data = &key_quota_root_maxbytes,
.maxlen = sizeof(unsigned),
.mode = 0644,
- .proc_handler = &proc_dointvec,
+ .proc_handler = &proc_dointvec_minmax,
+ .extra1 = (void *) &one,
+ .extra2 = (void *) &max,
+ },
+ {
+ .ctl_name = CTL_UNNUMBERED,
+ .procname = "gc_delay",
+ .data = &key_gc_delay,
+ .maxlen = sizeof(unsigned),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec_minmax,
+ .extra1 = (void *) &zero,
+ .extra2 = (void *) &max,
},
{ .ctl_name = 0 }
};
}
switch (a->type) {
+ case LSM_AUDIT_NO_AUDIT:
+ return;
case LSM_AUDIT_DATA_IPC:
audit_log_format(ab, " key=%d ", a->u.ipc_id);
break;
--- /dev/null
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/security.h>
+#include <linux/sysctl.h>
+
+/* amount of vm to protect from userspace access by both DAC and the LSM*/
+unsigned long mmap_min_addr;
+/* amount of vm to protect from userspace using CAP_SYS_RAWIO (DAC) */
+unsigned long dac_mmap_min_addr = CONFIG_DEFAULT_MMAP_MIN_ADDR;
+/* amount of vm to protect from userspace using the LSM = CONFIG_LSM_MMAP_MIN_ADDR */
+
+/*
+ * Update mmap_min_addr = max(dac_mmap_min_addr, CONFIG_LSM_MMAP_MIN_ADDR)
+ */
+static void update_mmap_min_addr(void)
+{
+#ifdef CONFIG_LSM_MMAP_MIN_ADDR
+ if (dac_mmap_min_addr > CONFIG_LSM_MMAP_MIN_ADDR)
+ mmap_min_addr = dac_mmap_min_addr;
+ else
+ mmap_min_addr = CONFIG_LSM_MMAP_MIN_ADDR;
+#else
+ mmap_min_addr = dac_mmap_min_addr;
+#endif
+}
+
+/*
+ * sysctl handler which just sets dac_mmap_min_addr = the new value and then
+ * calls update_mmap_min_addr() so non MAP_FIXED hints get rounded properly
+ */
+int mmap_min_addr_handler(struct ctl_table *table, int write, struct file *filp,
+ void __user *buffer, size_t *lenp, loff_t *ppos)
+{
+ int ret;
+
+ ret = proc_doulongvec_minmax(table, write, filp, buffer, lenp, ppos);
+
+ update_mmap_min_addr();
+
+ return ret;
+}
+
+int __init init_mmap_min_addr(void)
+{
+ update_mmap_min_addr();
+
+ return 0;
+}
+pure_initcall(init_mmap_min_addr);
/* Security operations */
-int security_ptrace_may_access(struct task_struct *child, unsigned int mode)
+int security_ptrace_access_check(struct task_struct *child, unsigned int mode)
{
- return security_ops->ptrace_may_access(child, mode);
+ return security_ops->ptrace_access_check(child, mode);
}
int security_ptrace_traceme(struct task_struct *parent)
return security_ops->task_create(clone_flags);
}
+int security_cred_alloc_blank(struct cred *cred, gfp_t gfp)
+{
+ return security_ops->cred_alloc_blank(cred, gfp);
+}
+
void security_cred_free(struct cred *cred)
{
security_ops->cred_free(cred);
security_ops->cred_commit(new, old);
}
+void security_transfer_creds(struct cred *new, const struct cred *old)
+{
+ security_ops->cred_transfer(new, old);
+}
+
int security_kernel_act_as(struct cred *new, u32 secid)
{
return security_ops->kernel_act_as(new, secid);
return security_ops->kernel_create_files_as(new, inode);
}
+int security_kernel_module_request(void)
+{
+ return security_ops->kernel_module_request();
+}
+
int security_task_setuid(uid_t id0, uid_t id1, uid_t id2, int flags)
{
return security_ops->task_setuid(id0, id1, id2, flags);
}
EXPORT_SYMBOL(security_release_secctx);
+int security_inode_notifysecctx(struct inode *inode, void *ctx, u32 ctxlen)
+{
+ return security_ops->inode_notifysecctx(inode, ctx, ctxlen);
+}
+EXPORT_SYMBOL(security_inode_notifysecctx);
+
+int security_inode_setsecctx(struct dentry *dentry, void *ctx, u32 ctxlen)
+{
+ return security_ops->inode_setsecctx(dentry, ctx, ctxlen);
+}
+EXPORT_SYMBOL(security_inode_setsecctx);
+
+int security_inode_getsecctx(struct inode *inode, void **ctx, u32 *ctxlen)
+{
+ return security_ops->inode_getsecctx(inode, ctx, ctxlen);
+}
+EXPORT_SYMBOL(security_inode_getsecctx);
+
#ifdef CONFIG_SECURITY_NETWORK
int security_unix_stream_connect(struct socket *sock, struct socket *other,
security_ops->inet_conn_established(sk, skb);
}
+int security_tun_dev_create(void)
+{
+ return security_ops->tun_dev_create();
+}
+EXPORT_SYMBOL(security_tun_dev_create);
+
+void security_tun_dev_post_create(struct sock *sk)
+{
+ return security_ops->tun_dev_post_create(sk);
+}
+EXPORT_SYMBOL(security_tun_dev_post_create);
+
+int security_tun_dev_attach(struct sock *sk)
+{
+ return security_ops->tun_dev_attach(sk);
+}
+EXPORT_SYMBOL(security_tun_dev_attach);
+
#endif /* CONFIG_SECURITY_NETWORK */
#ifdef CONFIG_SECURITY_NETWORK_XFRM
return security_ops->key_getsecurity(key, _buffer);
}
+int security_key_session_to_parent(const struct cred *cred,
+ const struct cred *parent_cred,
+ struct key *key)
+{
+ return security_ops->key_session_to_parent(cred, parent_cred, key);
+}
+
#endif /* CONFIG_KEYS */
#ifdef CONFIG_AUDIT
* @tclass: target security class
* @av: access vector
*/
-void avc_dump_av(struct audit_buffer *ab, u16 tclass, u32 av)
+static void avc_dump_av(struct audit_buffer *ab, u16 tclass, u32 av)
{
const char **common_pts = NULL;
u32 common_base = 0;
return node;
}
-static inline void avc_print_ipv6_addr(struct audit_buffer *ab,
- struct in6_addr *addr, __be16 port,
- char *name1, char *name2)
+/**
+ * avc_audit_pre_callback - SELinux specific information
+ * will be called by generic audit code
+ * @ab: the audit buffer
+ * @a: audit_data
+ */
+static void avc_audit_pre_callback(struct audit_buffer *ab, void *a)
{
- if (!ipv6_addr_any(addr))
- audit_log_format(ab, " %s=%pI6", name1, addr);
- if (port)
- audit_log_format(ab, " %s=%d", name2, ntohs(port));
+ struct common_audit_data *ad = a;
+ audit_log_format(ab, "avc: %s ",
+ ad->selinux_audit_data.denied ? "denied" : "granted");
+ avc_dump_av(ab, ad->selinux_audit_data.tclass,
+ ad->selinux_audit_data.audited);
+ audit_log_format(ab, " for ");
}
-static inline void avc_print_ipv4_addr(struct audit_buffer *ab, __be32 addr,
- __be16 port, char *name1, char *name2)
+/**
+ * avc_audit_post_callback - SELinux specific information
+ * will be called by generic audit code
+ * @ab: the audit buffer
+ * @a: audit_data
+ */
+static void avc_audit_post_callback(struct audit_buffer *ab, void *a)
{
- if (addr)
- audit_log_format(ab, " %s=%pI4", name1, &addr);
- if (port)
- audit_log_format(ab, " %s=%d", name2, ntohs(port));
+ struct common_audit_data *ad = a;
+ audit_log_format(ab, " ");
+ avc_dump_query(ab, ad->selinux_audit_data.ssid,
+ ad->selinux_audit_data.tsid,
+ ad->selinux_audit_data.tclass);
}
/**
*/
void avc_audit(u32 ssid, u32 tsid,
u16 tclass, u32 requested,
- struct av_decision *avd, int result, struct avc_audit_data *a)
+ struct av_decision *avd, int result, struct common_audit_data *a)
{
- struct task_struct *tsk = current;
- struct inode *inode = NULL;
+ struct common_audit_data stack_data;
u32 denied, audited;
- struct audit_buffer *ab;
-
denied = requested & ~avd->allowed;
if (denied) {
audited = denied;
if (!(audited & avd->auditallow))
return;
}
-
- ab = audit_log_start(current->audit_context, GFP_ATOMIC, AUDIT_AVC);
- if (!ab)
- return; /* audit_panic has been called */
- audit_log_format(ab, "avc: %s ", denied ? "denied" : "granted");
- avc_dump_av(ab, tclass, audited);
- audit_log_format(ab, " for ");
- if (a && a->tsk)
- tsk = a->tsk;
- if (tsk && tsk->pid) {
- audit_log_format(ab, " pid=%d comm=", tsk->pid);
- audit_log_untrustedstring(ab, tsk->comm);
+ if (!a) {
+ a = &stack_data;
+ memset(a, 0, sizeof(*a));
+ a->type = LSM_AUDIT_NO_AUDIT;
}
- if (a) {
- switch (a->type) {
- case AVC_AUDIT_DATA_IPC:
- audit_log_format(ab, " key=%d", a->u.ipc_id);
- break;
- case AVC_AUDIT_DATA_CAP:
- audit_log_format(ab, " capability=%d", a->u.cap);
- break;
- case AVC_AUDIT_DATA_FS:
- if (a->u.fs.path.dentry) {
- struct dentry *dentry = a->u.fs.path.dentry;
- if (a->u.fs.path.mnt) {
- audit_log_d_path(ab, "path=",
- &a->u.fs.path);
- } else {
- audit_log_format(ab, " name=");
- audit_log_untrustedstring(ab, dentry->d_name.name);
- }
- inode = dentry->d_inode;
- } else if (a->u.fs.inode) {
- struct dentry *dentry;
- inode = a->u.fs.inode;
- dentry = d_find_alias(inode);
- if (dentry) {
- audit_log_format(ab, " name=");
- audit_log_untrustedstring(ab, dentry->d_name.name);
- dput(dentry);
- }
- }
- if (inode)
- audit_log_format(ab, " dev=%s ino=%lu",
- inode->i_sb->s_id,
- inode->i_ino);
- break;
- case AVC_AUDIT_DATA_NET:
- if (a->u.net.sk) {
- struct sock *sk = a->u.net.sk;
- struct unix_sock *u;
- int len = 0;
- char *p = NULL;
-
- switch (sk->sk_family) {
- case AF_INET: {
- struct inet_sock *inet = inet_sk(sk);
-
- avc_print_ipv4_addr(ab, inet->rcv_saddr,
- inet->sport,
- "laddr", "lport");
- avc_print_ipv4_addr(ab, inet->daddr,
- inet->dport,
- "faddr", "fport");
- break;
- }
- case AF_INET6: {
- struct inet_sock *inet = inet_sk(sk);
- struct ipv6_pinfo *inet6 = inet6_sk(sk);
-
- avc_print_ipv6_addr(ab, &inet6->rcv_saddr,
- inet->sport,
- "laddr", "lport");
- avc_print_ipv6_addr(ab, &inet6->daddr,
- inet->dport,
- "faddr", "fport");
- break;
- }
- case AF_UNIX:
- u = unix_sk(sk);
- if (u->dentry) {
- struct path path = {
- .dentry = u->dentry,
- .mnt = u->mnt
- };
- audit_log_d_path(ab, "path=",
- &path);
- break;
- }
- if (!u->addr)
- break;
- len = u->addr->len-sizeof(short);
- p = &u->addr->name->sun_path[0];
- audit_log_format(ab, " path=");
- if (*p)
- audit_log_untrustedstring(ab, p);
- else
- audit_log_n_hex(ab, p, len);
- break;
- }
- }
-
- switch (a->u.net.family) {
- case AF_INET:
- avc_print_ipv4_addr(ab, a->u.net.v4info.saddr,
- a->u.net.sport,
- "saddr", "src");
- avc_print_ipv4_addr(ab, a->u.net.v4info.daddr,
- a->u.net.dport,
- "daddr", "dest");
- break;
- case AF_INET6:
- avc_print_ipv6_addr(ab, &a->u.net.v6info.saddr,
- a->u.net.sport,
- "saddr", "src");
- avc_print_ipv6_addr(ab, &a->u.net.v6info.daddr,
- a->u.net.dport,
- "daddr", "dest");
- break;
- }
- if (a->u.net.netif > 0) {
- struct net_device *dev;
-
- /* NOTE: we always use init's namespace */
- dev = dev_get_by_index(&init_net,
- a->u.net.netif);
- if (dev) {
- audit_log_format(ab, " netif=%s",
- dev->name);
- dev_put(dev);
- }
- }
- break;
- }
- }
- audit_log_format(ab, " ");
- avc_dump_query(ab, ssid, tsid, tclass);
- audit_log_end(ab);
+ a->selinux_audit_data.tclass = tclass;
+ a->selinux_audit_data.requested = requested;
+ a->selinux_audit_data.ssid = ssid;
+ a->selinux_audit_data.tsid = tsid;
+ a->selinux_audit_data.audited = audited;
+ a->selinux_audit_data.denied = denied;
+ a->lsm_pre_audit = avc_audit_pre_callback;
+ a->lsm_post_audit = avc_audit_post_callback;
+ common_lsm_audit(a);
}
/**
* another -errno upon other errors.
*/
int avc_has_perm(u32 ssid, u32 tsid, u16 tclass,
- u32 requested, struct avc_audit_data *auditdata)
+ u32 requested, struct common_audit_data *auditdata)
{
struct av_decision avd;
int rc;
{
return avc_cache.latest_notif;
}
+
+void avc_disable(void)
+{
+ if (avc_node_cachep)
+ kmem_cache_destroy(avc_node_cachep);
+}
* Eric Paris <eparis@redhat.com>
* Copyright (C) 2004-2005 Trusted Computer Solutions, Inc.
* <dgoeddel@trustedcs.com>
- * Copyright (C) 2006, 2007 Hewlett-Packard Development Company, L.P.
- *
Paul Moore <paul.moore@hp.com>
+ * Copyright (C) 2006, 2007, 2009 Hewlett-Packard Development Company, L.P.
+ * Paul Moore <paul.moore@hp.com>
* Copyright (C) 2007 Hitachi Software Engineering Co., Ltd.
* Yuichi Nakamura <ynakam@hitachisoft.jp>
*
sbsec->behavior > ARRAY_SIZE(labeling_behaviors))
sbsec->flags &= ~SE_SBLABELSUPP;
+ /* Special handling for sysfs. Is genfs but also has setxattr handler*/
+ if (strncmp(sb->s_type->name, "sysfs", sizeof("sysfs")) == 0)
+ sbsec->flags |= SE_SBLABELSUPP;
+
/* Initialize the root inode. */
rc = inode_doinit_with_dentry(root_inode, root);
rc = inode->i_op->getxattr(dentry, XATTR_NAME_SELINUX,
context, len);
if (rc == -ERANGE) {
+ kfree(context);
+
/* Need a larger buffer. Query for the right size. */
rc = inode->i_op->getxattr(dentry, XATTR_NAME_SELINUX,
NULL, 0);
dput(dentry);
goto out_unlock;
}
- kfree(context);
len = rc;
context = kmalloc(len+1, GFP_NOFS);
if (!context) {
const struct cred *cred,
int cap, int audit)
{
- struct avc_audit_data ad;
+ struct common_audit_data ad;
struct av_decision avd;
u16 sclass;
u32 sid = cred_sid(cred);
u32 av = CAP_TO_MASK(cap);
int rc;
- AVC_AUDIT_DATA_INIT(&ad, CAP);
+ COMMON_AUDIT_DATA_INIT(&ad, CAP);
ad.tsk = tsk;
ad.u.cap = cap;
static int inode_has_perm(const struct cred *cred,
struct inode *inode,
u32 perms,
- struct avc_audit_data *adp)
+ struct common_audit_data *adp)
{
struct inode_security_struct *isec;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
u32 sid;
+ validate_creds(cred);
+
if (unlikely(IS_PRIVATE(inode)))
return 0;
if (!adp) {
adp = &ad;
- AVC_AUDIT_DATA_INIT(&ad, FS);
+ COMMON_AUDIT_DATA_INIT(&ad, FS);
ad.u.fs.inode = inode;
}
u32 av)
{
struct inode *inode = dentry->d_inode;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
- AVC_AUDIT_DATA_INIT(&ad, FS);
+ COMMON_AUDIT_DATA_INIT(&ad, FS);
ad.u.fs.path.mnt = mnt;
ad.u.fs.path.dentry = dentry;
return inode_has_perm(cred, inode, av, &ad);
{
struct file_security_struct *fsec = file->f_security;
struct inode *inode = file->f_path.dentry->d_inode;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
u32 sid = cred_sid(cred);
int rc;
- AVC_AUDIT_DATA_INIT(&ad, FS);
+ COMMON_AUDIT_DATA_INIT(&ad, FS);
ad.u.fs.path = file->f_path;
if (sid != fsec->sid) {
struct inode_security_struct *dsec;
struct superblock_security_struct *sbsec;
u32 sid, newsid;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
int rc;
dsec = dir->i_security;
sid = tsec->sid;
newsid = tsec->create_sid;
- AVC_AUDIT_DATA_INIT(&ad, FS);
+ COMMON_AUDIT_DATA_INIT(&ad, FS);
ad.u.fs.path.dentry = dentry;
rc = avc_has_perm(sid, dsec->sid, SECCLASS_DIR,
{
struct inode_security_struct *dsec, *isec;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
u32 sid = current_sid();
u32 av;
int rc;
dsec = dir->i_security;
isec = dentry->d_inode->i_security;
- AVC_AUDIT_DATA_INIT(&ad, FS);
+ COMMON_AUDIT_DATA_INIT(&ad, FS);
ad.u.fs.path.dentry = dentry;
av = DIR__SEARCH;
struct dentry *new_dentry)
{
struct inode_security_struct *old_dsec, *new_dsec, *old_isec, *new_isec;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
u32 sid = current_sid();
u32 av;
int old_is_dir, new_is_dir;
old_is_dir = S_ISDIR(old_dentry->d_inode->i_mode);
new_dsec = new_dir->i_security;
- AVC_AUDIT_DATA_INIT(&ad, FS);
+ COMMON_AUDIT_DATA_INIT(&ad, FS);
ad.u.fs.path.dentry = old_dentry;
rc = avc_has_perm(sid, old_dsec->sid, SECCLASS_DIR,
static int superblock_has_perm(const struct cred *cred,
struct super_block *sb,
u32 perms,
- struct avc_audit_data *ad)
+ struct common_audit_data *ad)
{
struct superblock_security_struct *sbsec;
u32 sid = cred_sid(cred);
/* Hook functions begin here. */
-static int selinux_ptrace_may_access(struct task_struct *child,
+static int selinux_ptrace_access_check(struct task_struct *child,
unsigned int mode)
{
int rc;
- rc = cap_ptrace_may_access(child, mode);
+ rc = cap_ptrace_access_check(child, mode);
if (rc)
return rc;
const struct task_security_struct *old_tsec;
struct task_security_struct *new_tsec;
struct inode_security_struct *isec;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
struct inode *inode = bprm->file->f_path.dentry->d_inode;
int rc;
return rc;
}
- AVC_AUDIT_DATA_INIT(&ad, FS);
+ COMMON_AUDIT_DATA_INIT(&ad, FS);
ad.u.fs.path = bprm->file->f_path;
if (bprm->file->f_path.mnt->mnt_flags & MNT_NOSUID)
static inline void flush_unauthorized_files(const struct cred *cred,
struct files_struct *files)
{
- struct avc_audit_data ad;
+ struct common_audit_data ad;
struct file *file, *devnull = NULL;
struct tty_struct *tty;
struct fdtable *fdt;
/* Revalidate access to inherited open files. */
- AVC_AUDIT_DATA_INIT(&ad, FS);
+ COMMON_AUDIT_DATA_INIT(&ad, FS);
spin_lock(&files->file_lock);
for (;;) {
static int selinux_sb_kern_mount(struct super_block *sb, int flags, void *data)
{
const struct cred *cred = current_cred();
- struct avc_audit_data ad;
+ struct common_audit_data ad;
int rc;
rc = superblock_doinit(sb, data);
if (flags & MS_KERNMOUNT)
return 0;
- AVC_AUDIT_DATA_INIT(&ad, FS);
+ COMMON_AUDIT_DATA_INIT(&ad, FS);
ad.u.fs.path.dentry = sb->s_root;
return superblock_has_perm(cred, sb, FILESYSTEM__MOUNT, &ad);
}
static int selinux_sb_statfs(struct dentry *dentry)
{
const struct cred *cred = current_cred();
- struct avc_audit_data ad;
+ struct common_audit_data ad;
- AVC_AUDIT_DATA_INIT(&ad, FS);
+ COMMON_AUDIT_DATA_INIT(&ad, FS);
ad.u.fs.path.dentry = dentry->d_sb->s_root;
return superblock_has_perm(cred, dentry->d_sb, FILESYSTEM__GETATTR, &ad);
}
static int selinux_inode_setattr(struct dentry *dentry, struct iattr *iattr)
{
const struct cred *cred = current_cred();
+ unsigned int ia_valid = iattr->ia_valid;
+
+ /* ATTR_FORCE is just used for ATTR_KILL_S[UG]ID. */
+ if (ia_valid & ATTR_FORCE) {
+ ia_valid &= ~(ATTR_KILL_SUID | ATTR_KILL_SGID | ATTR_MODE |
+ ATTR_FORCE);
+ if (!ia_valid)
+ return 0;
+ }
- if (iattr->ia_valid & ATTR_FORCE)
- return 0;
-
- if (iattr->ia_valid & (ATTR_MODE | ATTR_UID | ATTR_GID |
- ATTR_ATIME_SET | ATTR_MTIME_SET))
+ if (ia_valid & (ATTR_MODE | ATTR_UID | ATTR_GID |
+ ATTR_ATIME_SET | ATTR_MTIME_SET | ATTR_TIMES_SET))
return dentry_has_perm(cred, NULL, dentry, FILE__SETATTR);
return dentry_has_perm(cred, NULL, dentry, FILE__WRITE);
struct inode *inode = dentry->d_inode;
struct inode_security_struct *isec = inode->i_security;
struct superblock_security_struct *sbsec;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
u32 newsid, sid = current_sid();
int rc = 0;
if (!is_owner_or_cap(inode))
return -EPERM;
- AVC_AUDIT_DATA_INIT(&ad, FS);
+ COMMON_AUDIT_DATA_INIT(&ad, FS);
ad.u.fs.path.dentry = dentry;
rc = avc_has_perm(sid, isec->sid, isec->sclass,
return rc;
isec->sid = newsid;
+ isec->initialized = 1;
return 0;
}
const struct cred *cred = current_cred();
struct inode *inode = file->f_path.dentry->d_inode;
- if (!mask) {
- /* No permission to check. Existence test. */
- return 0;
- }
-
/* file_mask_to_av won't add FILE__WRITE if MAY_APPEND is set */
if ((file->f_flags & O_APPEND) && (mask & MAY_WRITE))
mask |= MAY_APPEND;
static int selinux_file_permission(struct file *file, int mask)
{
+ struct inode *inode = file->f_path.dentry->d_inode;
+ struct file_security_struct *fsec = file->f_security;
+ struct inode_security_struct *isec = inode->i_security;
+ u32 sid = current_sid();
+
if (!mask)
/* No permission to check. Existence test. */
return 0;
+ if (sid == fsec->sid && fsec->isid == isec->sid &&
+ fsec->pseqno == avc_policy_seqno())
+ /* No change since dentry_open check. */
+ return 0;
+
return selinux_revalidate_file_permission(file, mask);
}
int rc = 0;
u32 sid = current_sid();
- if (addr < mmap_min_addr)
+ /*
+ * notice that we are intentionally putting the SELinux check before
+ * the secondary cap_file_mmap check. This is such a likely attempt
+ * at bad behaviour/exploit that we always want to get the AVC, even
+ * if DAC would have also denied the operation.
+ */
+ if (addr < CONFIG_LSM_MMAP_MIN_ADDR) {
rc = avc_has_perm(sid, sid, SECCLASS_MEMPROTECT,
MEMPROTECT__MMAP_ZERO, NULL);
+ if (rc)
+ return rc;
+ }
+
+ /* do DAC check on address space usage */
+ rc = cap_file_mmap(file, reqprot, prot, flags, addr, addr_only);
if (rc || addr_only)
return rc;
return current_has_perm(current, PROCESS__FORK);
}
+/*
+ * allocate the SELinux part of blank credentials
+ */
+static int selinux_cred_alloc_blank(struct cred *cred, gfp_t gfp)
+{
+ struct task_security_struct *tsec;
+
+ tsec = kzalloc(sizeof(struct task_security_struct), gfp);
+ if (!tsec)
+ return -ENOMEM;
+
+ cred->security = tsec;
+ return 0;
+}
+
/*
* detach and free the LSM part of a set of credentials
*/
static void selinux_cred_free(struct cred *cred)
{
struct task_security_struct *tsec = cred->security;
- cred->security = NULL;
+
+ BUG_ON((unsigned long) cred->security < PAGE_SIZE);
+ cred->security = (void *) 0x7UL;
kfree(tsec);
}
return 0;
}
+/*
+ * transfer the SELinux data to a blank set of creds
+ */
+static void selinux_cred_transfer(struct cred *new, const struct cred *old)
+{
+ const struct task_security_struct *old_tsec = old->security;
+ struct task_security_struct *tsec = new->security;
+
+ *tsec = *old_tsec;
+}
+
/*
* set the security data for a kernel service
* - all the creation contexts are set to unlabelled
return 0;
}
+static int selinux_kernel_module_request(void)
+{
+ return task_has_system(current, SYSTEM__MODULE_REQUEST);
+}
+
static int selinux_task_setpgid(struct task_struct *p, pid_t pgid)
{
return current_has_perm(p, PROCESS__SETPGID);
/* Returns error only if unable to parse addresses */
static int selinux_parse_skb_ipv4(struct sk_buff *skb,
- struct avc_audit_data *ad, u8 *proto)
+ struct common_audit_data *ad, u8 *proto)
{
int offset, ihlen, ret = -EINVAL;
struct iphdr _iph, *ih;
/* Returns error only if unable to parse addresses */
static int selinux_parse_skb_ipv6(struct sk_buff *skb,
- struct avc_audit_data *ad, u8 *proto)
+ struct common_audit_data *ad, u8 *proto)
{
u8 nexthdr;
int ret = -EINVAL, offset;
#endif /* IPV6 */
-static int selinux_parse_skb(struct sk_buff *skb, struct avc_audit_data *ad,
+static int selinux_parse_skb(struct sk_buff *skb, struct common_audit_data *ad,
char **_addrp, int src, u8 *proto)
{
char *addrp;
u32 perms)
{
struct inode_security_struct *isec;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
u32 sid;
int err = 0;
goto out;
sid = task_sid(task);
- AVC_AUDIT_DATA_INIT(&ad, NET);
+ COMMON_AUDIT_DATA_INIT(&ad, NET);
ad.u.net.sk = sock->sk;
err = avc_has_perm(sid, isec->sid, isec->sclass, perms, &ad);
if (family == PF_INET || family == PF_INET6) {
char *addrp;
struct inode_security_struct *isec;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
struct sockaddr_in *addr4 = NULL;
struct sockaddr_in6 *addr6 = NULL;
unsigned short snum;
snum, &sid);
if (err)
goto out;
- AVC_AUDIT_DATA_INIT(&ad, NET);
+ COMMON_AUDIT_DATA_INIT(&ad, NET);
ad.u.net.sport = htons(snum);
ad.u.net.family = family;
err = avc_has_perm(isec->sid, sid,
if (err)
goto out;
- AVC_AUDIT_DATA_INIT(&ad, NET);
+ COMMON_AUDIT_DATA_INIT(&ad, NET);
ad.u.net.sport = htons(snum);
ad.u.net.family = family;
isec = SOCK_INODE(sock)->i_security;
if (isec->sclass == SECCLASS_TCP_SOCKET ||
isec->sclass == SECCLASS_DCCP_SOCKET) {
- struct avc_audit_data ad;
+ struct common_audit_data ad;
struct sockaddr_in *addr4 = NULL;
struct sockaddr_in6 *addr6 = NULL;
unsigned short snum;
perm = (isec->sclass == SECCLASS_TCP_SOCKET) ?
TCP_SOCKET__NAME_CONNECT : DCCP_SOCKET__NAME_CONNECT;
- AVC_AUDIT_DATA_INIT(&ad, NET);
+ COMMON_AUDIT_DATA_INIT(&ad, NET);
ad.u.net.dport = htons(snum);
ad.u.net.family = sk->sk_family;
err = avc_has_perm(isec->sid, sid, isec->sclass, perm, &ad);
struct sk_security_struct *ssec;
struct inode_security_struct *isec;
struct inode_security_struct *other_isec;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
int err;
isec = SOCK_INODE(sock)->i_security;
other_isec = SOCK_INODE(other)->i_security;
- AVC_AUDIT_DATA_INIT(&ad, NET);
+ COMMON_AUDIT_DATA_INIT(&ad, NET);
ad.u.net.sk = other->sk;
err = avc_has_perm(isec->sid, other_isec->sid,
{
struct inode_security_struct *isec;
struct inode_security_struct *other_isec;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
int err;
isec = SOCK_INODE(sock)->i_security;
other_isec = SOCK_INODE(other)->i_security;
- AVC_AUDIT_DATA_INIT(&ad, NET);
+ COMMON_AUDIT_DATA_INIT(&ad, NET);
ad.u.net.sk = other->sk;
err = avc_has_perm(isec->sid, other_isec->sid,
static int selinux_inet_sys_rcv_skb(int ifindex, char *addrp, u16 family,
u32 peer_sid,
- struct avc_audit_data *ad)
+ struct common_audit_data *ad)
{
int err;
u32 if_sid;
struct sk_security_struct *sksec = sk->sk_security;
u32 peer_sid;
u32 sk_sid = sksec->sid;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
char *addrp;
- AVC_AUDIT_DATA_INIT(&ad, NET);
+ COMMON_AUDIT_DATA_INIT(&ad, NET);
ad.u.net.netif = skb->iif;
ad.u.net.family = family;
err = selinux_parse_skb(skb, &ad, &addrp, 1, NULL);
struct sk_security_struct *sksec = sk->sk_security;
u16 family = sk->sk_family;
u32 sk_sid = sksec->sid;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
char *addrp;
u8 secmark_active;
u8 peerlbl_active;
if (!secmark_active && !peerlbl_active)
return 0;
- AVC_AUDIT_DATA_INIT(&ad, NET);
+ COMMON_AUDIT_DATA_INIT(&ad, NET);
ad.u.net.netif = skb->iif;
ad.u.net.family = family;
err = selinux_parse_skb(skb, &ad, &addrp, 1, NULL);
fl->secid = req->secid;
}
+static int selinux_tun_dev_create(void)
+{
+ u32 sid = current_sid();
+
+ /* we aren't taking into account the "sockcreate" SID since the socket
+ * that is being created here is not a socket in the traditional sense,
+ * instead it is a private sock, accessible only to the kernel, and
+ * representing a wide range of network traffic spanning multiple
+ * connections unlike traditional sockets - check the TUN driver to
+ * get a better understanding of why this socket is special */
+
+ return avc_has_perm(sid, sid, SECCLASS_TUN_SOCKET, TUN_SOCKET__CREATE,
+ NULL);
+}
+
+static void selinux_tun_dev_post_create(struct sock *sk)
+{
+ struct sk_security_struct *sksec = sk->sk_security;
+
+ /* we don't currently perform any NetLabel based labeling here and it
+ * isn't clear that we would want to do so anyway; while we could apply
+ * labeling without the support of the TUN user the resulting labeled
+ * traffic from the other end of the connection would almost certainly
+ * cause confusion to the TUN user that had no idea network labeling
+ * protocols were being used */
+
+ /* see the comments in selinux_tun_dev_create() about why we don't use
+ * the sockcreate SID here */
+
+ sksec->sid = current_sid();
+ sksec->sclass = SECCLASS_TUN_SOCKET;
+}
+
+static int selinux_tun_dev_attach(struct sock *sk)
+{
+ struct sk_security_struct *sksec = sk->sk_security;
+ u32 sid = current_sid();
+ int err;
+
+ err = avc_has_perm(sid, sksec->sid, SECCLASS_TUN_SOCKET,
+ TUN_SOCKET__RELABELFROM, NULL);
+ if (err)
+ return err;
+ err = avc_has_perm(sid, sid, SECCLASS_TUN_SOCKET,
+ TUN_SOCKET__RELABELTO, NULL);
+ if (err)
+ return err;
+
+ sksec->sid = sid;
+
+ return 0;
+}
+
static int selinux_nlmsg_perm(struct sock *sk, struct sk_buff *skb)
{
int err = 0;
int err;
char *addrp;
u32 peer_sid;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
u8 secmark_active;
u8 netlbl_active;
u8 peerlbl_active;
if (selinux_skb_peerlbl_sid(skb, family, &peer_sid) != 0)
return NF_DROP;
- AVC_AUDIT_DATA_INIT(&ad, NET);
+ COMMON_AUDIT_DATA_INIT(&ad, NET);
ad.u.net.netif = ifindex;
ad.u.net.family = family;
if (selinux_parse_skb(skb, &ad, &addrp, 1, NULL) != 0)
{
struct sock *sk = skb->sk;
struct sk_security_struct *sksec;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
char *addrp;
u8 proto;
return NF_ACCEPT;
sksec = sk->sk_security;
- AVC_AUDIT_DATA_INIT(&ad, NET);
+ COMMON_AUDIT_DATA_INIT(&ad, NET);
ad.u.net.netif = ifindex;
ad.u.net.family = family;
if (selinux_parse_skb(skb, &ad, &addrp, 0, &proto))
u32 secmark_perm;
u32 peer_sid;
struct sock *sk;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
char *addrp;
u8 secmark_active;
u8 peerlbl_active;
secmark_perm = PACKET__SEND;
}
- AVC_AUDIT_DATA_INIT(&ad, NET);
+ COMMON_AUDIT_DATA_INIT(&ad, NET);
ad.u.net.netif = ifindex;
ad.u.net.family = family;
if (selinux_parse_skb(skb, &ad, &addrp, 0, NULL))
static int selinux_netlink_recv(struct sk_buff *skb, int capability)
{
int err;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
err = cap_netlink_recv(skb, capability);
if (err)
return err;
- AVC_AUDIT_DATA_INIT(&ad, CAP);
+ COMMON_AUDIT_DATA_INIT(&ad, CAP);
ad.u.cap = capability;
return avc_has_perm(NETLINK_CB(skb).sid, NETLINK_CB(skb).sid,
u32 perms)
{
struct ipc_security_struct *isec;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
u32 sid = current_sid();
isec = ipc_perms->security;
- AVC_AUDIT_DATA_INIT(&ad, IPC);
+ COMMON_AUDIT_DATA_INIT(&ad, IPC);
ad.u.ipc_id = ipc_perms->key;
return avc_has_perm(sid, isec->sid, isec->sclass, perms, &ad);
static int selinux_msg_queue_alloc_security(struct msg_queue *msq)
{
struct ipc_security_struct *isec;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
u32 sid = current_sid();
int rc;
isec = msq->q_perm.security;
- AVC_AUDIT_DATA_INIT(&ad, IPC);
+ COMMON_AUDIT_DATA_INIT(&ad, IPC);
ad.u.ipc_id = msq->q_perm.key;
rc = avc_has_perm(sid, isec->sid, SECCLASS_MSGQ,
static int selinux_msg_queue_associate(struct msg_queue *msq, int msqflg)
{
struct ipc_security_struct *isec;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
u32 sid = current_sid();
isec = msq->q_perm.security;
- AVC_AUDIT_DATA_INIT(&ad, IPC);
+ COMMON_AUDIT_DATA_INIT(&ad, IPC);
ad.u.ipc_id = msq->q_perm.key;
return avc_has_perm(sid, isec->sid, SECCLASS_MSGQ,
{
struct ipc_security_struct *isec;
struct msg_security_struct *msec;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
u32 sid = current_sid();
int rc;
return rc;
}
- AVC_AUDIT_DATA_INIT(&ad, IPC);
+ COMMON_AUDIT_DATA_INIT(&ad, IPC);
ad.u.ipc_id = msq->q_perm.key;
/* Can this process write to the queue? */
{
struct ipc_security_struct *isec;
struct msg_security_struct *msec;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
u32 sid = task_sid(target);
int rc;
isec = msq->q_perm.security;
msec = msg->security;
- AVC_AUDIT_DATA_INIT(&ad, IPC);
+ COMMON_AUDIT_DATA_INIT(&ad, IPC);
ad.u.ipc_id = msq->q_perm.key;
rc = avc_has_perm(sid, isec->sid,
static int selinux_shm_alloc_security(struct shmid_kernel *shp)
{
struct ipc_security_struct *isec;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
u32 sid = current_sid();
int rc;
isec = shp->shm_perm.security;
- AVC_AUDIT_DATA_INIT(&ad, IPC);
+ COMMON_AUDIT_DATA_INIT(&ad, IPC);
ad.u.ipc_id = shp->shm_perm.key;
rc = avc_has_perm(sid, isec->sid, SECCLASS_SHM,
static int selinux_shm_associate(struct shmid_kernel *shp, int shmflg)
{
struct ipc_security_struct *isec;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
u32 sid = current_sid();
isec = shp->shm_perm.security;
- AVC_AUDIT_DATA_INIT(&ad, IPC);
+ COMMON_AUDIT_DATA_INIT(&ad, IPC);
ad.u.ipc_id = shp->shm_perm.key;
return avc_has_perm(sid, isec->sid, SECCLASS_SHM,
static int selinux_sem_alloc_security(struct sem_array *sma)
{
struct ipc_security_struct *isec;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
u32 sid = current_sid();
int rc;
isec = sma->sem_perm.security;
- AVC_AUDIT_DATA_INIT(&ad, IPC);
+ COMMON_AUDIT_DATA_INIT(&ad, IPC);
ad.u.ipc_id = sma->sem_perm.key;
rc = avc_has_perm(sid, isec->sid, SECCLASS_SEM,
static int selinux_sem_associate(struct sem_array *sma, int semflg)
{
struct ipc_security_struct *isec;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
u32 sid = current_sid();
isec = sma->sem_perm.security;
- AVC_AUDIT_DATA_INIT(&ad, IPC);
+ COMMON_AUDIT_DATA_INIT(&ad, IPC);
ad.u.ipc_id = sma->sem_perm.key;
return avc_has_perm(sid, isec->sid, SECCLASS_SEM,
/* Only allow single threaded processes to change context */
error = -EPERM;
- if (!is_single_threaded(p)) {
+ if (!current_is_single_threaded()) {
error = security_bounded_transition(tsec->sid, sid);
if (error)
goto abort_change;
kfree(secdata);
}
+/*
+ * called with inode->i_mutex locked
+ */
+static int selinux_inode_notifysecctx(struct inode *inode, void *ctx, u32 ctxlen)
+{
+ return selinux_inode_setsecurity(inode, XATTR_SELINUX_SUFFIX, ctx, ctxlen, 0);
+}
+
+/*
+ * called with inode->i_mutex locked
+ */
+static int selinux_inode_setsecctx(struct dentry *dentry, void *ctx, u32 ctxlen)
+{
+ return __vfs_setxattr_noperm(dentry, XATTR_NAME_SELINUX, ctx, ctxlen, 0);
+}
+
+static int selinux_inode_getsecctx(struct inode *inode, void **ctx, u32 *ctxlen)
+{
+ int len = 0;
+ len = selinux_inode_getsecurity(inode, XATTR_SELINUX_SUFFIX,
+ ctx, true);
+ if (len < 0)
+ return len;
+ *ctxlen = len;
+ return 0;
+}
#ifdef CONFIG_KEYS
static int selinux_key_alloc(struct key *k, const struct cred *cred,
static struct security_operations selinux_ops = {
.name = "selinux",
- .ptrace_may_access = selinux_ptrace_may_access,
+ .ptrace_access_check = selinux_ptrace_access_check,
.ptrace_traceme = selinux_ptrace_traceme,
.capget = selinux_capget,
.capset = selinux_capset,
.dentry_open = selinux_dentry_open,
.task_create = selinux_task_create,
+ .cred_alloc_blank = selinux_cred_alloc_blank,
.cred_free = selinux_cred_free,
.cred_prepare = selinux_cred_prepare,
+ .cred_transfer = selinux_cred_transfer,
.kernel_act_as = selinux_kernel_act_as,
.kernel_create_files_as = selinux_kernel_create_files_as,
+ .kernel_module_request = selinux_kernel_module_request,
.task_setpgid = selinux_task_setpgid,
.task_getpgid = selinux_task_getpgid,
.task_getsid = selinux_task_getsid,
.secid_to_secctx = selinux_secid_to_secctx,
.secctx_to_secid = selinux_secctx_to_secid,
.release_secctx = selinux_release_secctx,
+ .inode_notifysecctx = selinux_inode_notifysecctx,
+ .inode_setsecctx = selinux_inode_setsecctx,
+ .inode_getsecctx = selinux_inode_getsecctx,
.unix_stream_connect = selinux_socket_unix_stream_connect,
.unix_may_send = selinux_socket_unix_may_send,
.inet_csk_clone = selinux_inet_csk_clone,
.inet_conn_established = selinux_inet_conn_established,
.req_classify_flow = selinux_req_classify_flow,
+ .tun_dev_create = selinux_tun_dev_create,
+ .tun_dev_post_create = selinux_tun_dev_post_create,
+ .tun_dev_attach = selinux_tun_dev_attach,
#ifdef CONFIG_SECURITY_NETWORK_XFRM
.xfrm_policy_alloc_security = selinux_xfrm_policy_alloc,
selinux_disabled = 1;
selinux_enabled = 0;
+ /* Try to destroy the avc node cache */
+ avc_disable();
+
/* Reset security_ops to the secondary module, dummy or capability. */
security_ops = secondary_ops;
S_(SECCLASS_KEY_SOCKET, socket, 0x00400000UL)
S_(SECCLASS_UNIX_STREAM_SOCKET, socket, 0x00400000UL)
S_(SECCLASS_UNIX_DGRAM_SOCKET, socket, 0x00400000UL)
+ S_(SECCLASS_TUN_SOCKET, socket, 0x00400000UL)
S_(SECCLASS_IPC, ipc, 0x00000200UL)
S_(SECCLASS_SEM, ipc, 0x00000200UL)
S_(SECCLASS_MSGQ, ipc, 0x00000200UL)
S_(SECCLASS_SYSTEM, SYSTEM__SYSLOG_READ, "syslog_read")
S_(SECCLASS_SYSTEM, SYSTEM__SYSLOG_MOD, "syslog_mod")
S_(SECCLASS_SYSTEM, SYSTEM__SYSLOG_CONSOLE, "syslog_console")
+ S_(SECCLASS_SYSTEM, SYSTEM__MODULE_REQUEST, "module_request")
S_(SECCLASS_CAPABILITY, CAPABILITY__CHOWN, "chown")
S_(SECCLASS_CAPABILITY, CAPABILITY__DAC_OVERRIDE, "dac_override")
S_(SECCLASS_CAPABILITY, CAPABILITY__DAC_READ_SEARCH, "dac_read_search")
#define UNIX_DGRAM_SOCKET__RECV_MSG 0x00080000UL
#define UNIX_DGRAM_SOCKET__SEND_MSG 0x00100000UL
#define UNIX_DGRAM_SOCKET__NAME_BIND 0x00200000UL
+#define TUN_SOCKET__IOCTL 0x00000001UL
+#define TUN_SOCKET__READ 0x00000002UL
+#define TUN_SOCKET__WRITE 0x00000004UL
+#define TUN_SOCKET__CREATE 0x00000008UL
+#define TUN_SOCKET__GETATTR 0x00000010UL
+#define TUN_SOCKET__SETATTR 0x00000020UL
+#define TUN_SOCKET__LOCK 0x00000040UL
+#define TUN_SOCKET__RELABELFROM 0x00000080UL
+#define TUN_SOCKET__RELABELTO 0x00000100UL
+#define TUN_SOCKET__APPEND 0x00000200UL
+#define TUN_SOCKET__BIND 0x00000400UL
+#define TUN_SOCKET__CONNECT 0x00000800UL
+#define TUN_SOCKET__LISTEN 0x00001000UL
+#define TUN_SOCKET__ACCEPT 0x00002000UL
+#define TUN_SOCKET__GETOPT 0x00004000UL
+#define TUN_SOCKET__SETOPT 0x00008000UL
+#define TUN_SOCKET__SHUTDOWN 0x00010000UL
+#define TUN_SOCKET__RECVFROM 0x00020000UL
+#define TUN_SOCKET__SENDTO 0x00040000UL
+#define TUN_SOCKET__RECV_MSG 0x00080000UL
+#define TUN_SOCKET__SEND_MSG 0x00100000UL
+#define TUN_SOCKET__NAME_BIND 0x00200000UL
#define PROCESS__FORK 0x00000001UL
#define PROCESS__TRANSITION 0x00000002UL
#define PROCESS__SIGCHLD 0x00000004UL
#define SYSTEM__SYSLOG_READ 0x00000002UL
#define SYSTEM__SYSLOG_MOD 0x00000004UL
#define SYSTEM__SYSLOG_CONSOLE 0x00000008UL
+#define SYSTEM__MODULE_REQUEST 0x00000010UL
#define CAPABILITY__CHOWN 0x00000001UL
#define CAPABILITY__DAC_OVERRIDE 0x00000002UL
#define CAPABILITY__DAC_READ_SEARCH 0x00000004UL
#include <linux/spinlock.h>
#include <linux/init.h>
#include <linux/audit.h>
+#include <linux/lsm_audit.h>
#include <linux/in6.h>
#include <linux/path.h>
#include <asm/system.h>
struct sock;
struct sk_buff;
-/* Auxiliary data to use in generating the audit record. */
-struct avc_audit_data {
- char type;
-#define AVC_AUDIT_DATA_FS 1
-#define AVC_AUDIT_DATA_NET 2
-#define AVC_AUDIT_DATA_CAP 3
-#define AVC_AUDIT_DATA_IPC 4
- struct task_struct *tsk;
- union {
- struct {
- struct path path;
- struct inode *inode;
- } fs;
- struct {
- int netif;
- struct sock *sk;
- u16 family;
- __be16 dport;
- __be16 sport;
- union {
- struct {
- __be32 daddr;
- __be32 saddr;
- } v4;
- struct {
- struct in6_addr daddr;
- struct in6_addr saddr;
- } v6;
- } fam;
- } net;
- int cap;
- int ipc_id;
- } u;
-};
-
-#define v4info fam.v4
-#define v6info fam.v6
-
-/* Initialize an AVC audit data structure. */
-#define AVC_AUDIT_DATA_INIT(_d,_t) \
- { memset((_d), 0, sizeof(struct avc_audit_data)); (_d)->type = AVC_AUDIT_DATA_##_t; }
-
/*
* AVC statistics
*/
void avc_audit(u32 ssid, u32 tsid,
u16 tclass, u32 requested,
- struct av_decision *avd, int result, struct avc_audit_data *auditdata);
+ struct av_decision *avd,
+ int result,
+ struct common_audit_data *a);
#define AVC_STRICT 1 /* Ignore permissive mode. */
int avc_has_perm_noaudit(u32 ssid, u32 tsid,
int avc_has_perm(u32 ssid, u32 tsid,
u16 tclass, u32 requested,
- struct avc_audit_data *auditdata);
+ struct common_audit_data *auditdata);
u32 avc_policy_seqno(void);
u32 events, u32 ssid, u32 tsid,
u16 tclass, u32 perms);
-/* Shows permission in human readable form */
-void avc_dump_av(struct audit_buffer *ab, u16 tclass, u32 av);
-
/* Exported to selinuxfs */
int avc_get_hash_stats(char *page);
extern unsigned int avc_cache_threshold;
+/* Attempt to free avc node cache */
+void avc_disable(void);
+
#ifdef CONFIG_SECURITY_SELINUX_AVC_STATS
DECLARE_PER_CPU(struct avc_cache_stats, avc_cache_stats);
#endif
S_(NULL)
S_(NULL)
S_("kernel_service")
+ S_("tun_socket")
#define SECCLASS_PEER 68
#define SECCLASS_CAPABILITY2 69
#define SECCLASS_KERNEL_SERVICE 74
+#define SECCLASS_TUN_SOCKET 75
/*
* Security identifier indices for initial entities
int selinux_netlbl_sock_rcv_skb(struct sk_security_struct *sksec,
struct sk_buff *skb,
u16 family,
- struct avc_audit_data *ad);
+ struct common_audit_data *ad);
int selinux_netlbl_socket_setsockopt(struct socket *sock,
int level,
int optname);
static inline int selinux_netlbl_sock_rcv_skb(struct sk_security_struct *sksec,
struct sk_buff *skb,
u16 family,
- struct avc_audit_data *ad)
+ struct common_audit_data *ad)
{
return 0;
}
}
int selinux_xfrm_sock_rcv_skb(u32 sid, struct sk_buff *skb,
- struct avc_audit_data *ad);
+ struct common_audit_data *ad);
int selinux_xfrm_postroute_last(u32 isec_sid, struct sk_buff *skb,
- struct avc_audit_data *ad, u8 proto);
+ struct common_audit_data *ad, u8 proto);
int selinux_xfrm_decode_session(struct sk_buff *skb, u32 *sid, int ckall);
static inline void selinux_xfrm_notify_policyload(void)
}
static inline int selinux_xfrm_sock_rcv_skb(u32 isec_sid, struct sk_buff *skb,
- struct avc_audit_data *ad)
+ struct common_audit_data *ad)
{
return 0;
}
static inline int selinux_xfrm_postroute_last(u32 isec_sid, struct sk_buff *skb,
- struct avc_audit_data *ad, u8 proto)
+ struct common_audit_data *ad, u8 proto)
{
return 0;
}
int selinux_netlbl_sock_rcv_skb(struct sk_security_struct *sksec,
struct sk_buff *skb,
u16 family,
- struct avc_audit_data *ad)
+ struct common_audit_data *ad)
{
int rc;
u32 nlbl_sid;
*
* Added validation of kernel classes and permissions
*
+ * Updated: KaiGai Kohei <kaigai@ak.jp.nec.com>
+ *
+ * Added support for bounds domain and audit messaged on masked permissions
+ *
+ * Copyright (C) 2008, 2009 NEC Corporation
* Copyright (C) 2006, 2007 Hewlett-Packard Development Company, L.P.
* Copyright (C) 2004-2006 Trusted Computer Solutions, Inc.
* Copyright (C) 2003 - 2004, 2006 Tresys Technology, LLC
return s[0];
}
+/*
+ * security_dump_masked_av - dumps masked permissions during
+ * security_compute_av due to RBAC, MLS/Constraint and Type bounds.
+ */
+static int dump_masked_av_helper(void *k, void *d, void *args)
+{
+ struct perm_datum *pdatum = d;
+ char **permission_names = args;
+
+ BUG_ON(pdatum->value < 1 || pdatum->value > 32);
+
+ permission_names[pdatum->value - 1] = (char *)k;
+
+ return 0;
+}
+
+static void security_dump_masked_av(struct context *scontext,
+ struct context *tcontext,
+ u16 tclass,
+ u32 permissions,
+ const char *reason)
+{
+ struct common_datum *common_dat;
+ struct class_datum *tclass_dat;
+ struct audit_buffer *ab;
+ char *tclass_name;
+ char *scontext_name = NULL;
+ char *tcontext_name = NULL;
+ char *permission_names[32];
+ int index, length;
+ bool need_comma = false;
+
+ if (!permissions)
+ return;
+
+ tclass_name = policydb.p_class_val_to_name[tclass - 1];
+ tclass_dat = policydb.class_val_to_struct[tclass - 1];
+ common_dat = tclass_dat->comdatum;
+
+ /* init permission_names */
+ if (common_dat &&
+ hashtab_map(common_dat->permissions.table,
+ dump_masked_av_helper, permission_names) < 0)
+ goto out;
+
+ if (hashtab_map(tclass_dat->permissions.table,
+ dump_masked_av_helper, permission_names) < 0)
+ goto out;
+
+ /* get scontext/tcontext in text form */
+ if (context_struct_to_string(scontext,
+ &scontext_name, &length) < 0)
+ goto out;
+
+ if (context_struct_to_string(tcontext,
+ &tcontext_name, &length) < 0)
+ goto out;
+
+ /* audit a message */
+ ab = audit_log_start(current->audit_context,
+ GFP_ATOMIC, AUDIT_SELINUX_ERR);
+ if (!ab)
+ goto out;
+
+ audit_log_format(ab, "op=security_compute_av reason=%s "
+ "scontext=%s tcontext=%s tclass=%s perms=",
+ reason, scontext_name, tcontext_name, tclass_name);
+
+ for (index = 0; index < 32; index++) {
+ u32 mask = (1 << index);
+
+ if ((mask & permissions) == 0)
+ continue;
+
+ audit_log_format(ab, "%s%s",
+ need_comma ? "," : "",
+ permission_names[index]
+ ? permission_names[index] : "????");
+ need_comma = true;
+ }
+ audit_log_end(ab);
+out:
+ /* release scontext/tcontext */
+ kfree(tcontext_name);
+ kfree(scontext_name);
+
+ return;
+}
+
/*
* security_boundary_permission - drops violated permissions
* on boundary constraint.
}
if (masked) {
- struct audit_buffer *ab;
- char *stype_name
- = policydb.p_type_val_to_name[source->value - 1];
- char *ttype_name
- = policydb.p_type_val_to_name[target->value - 1];
- char *tclass_name
- = policydb.p_class_val_to_name[tclass - 1];
-
/* mask violated permissions */
avd->allowed &= ~masked;
- /* notice to userspace via audit message */
- ab = audit_log_start(current->audit_context,
- GFP_ATOMIC, AUDIT_SELINUX_ERR);
- if (!ab)
- return;
-
- audit_log_format(ab, "av boundary violation: "
- "source=%s target=%s tclass=%s",
- stype_name, ttype_name, tclass_name);
- avc_dump_av(ab, tclass, masked);
- audit_log_end(ab);
+ /* audit masked permissions */
+ security_dump_masked_av(scontext, tcontext,
+ tclass, masked, "bounds");
}
}
if ((constraint->permissions & (avd->allowed)) &&
!constraint_expr_eval(scontext, tcontext, NULL,
constraint->expr)) {
- avd->allowed = (avd->allowed) & ~(constraint->permissions);
+ avd->allowed &= ~(constraint->permissions);
}
constraint = constraint->next;
}
break;
}
if (!ra)
- avd->allowed = (avd->allowed) & ~(PROCESS__TRANSITION |
- PROCESS__DYNTRANSITION);
+ avd->allowed &= ~(PROCESS__TRANSITION |
+ PROCESS__DYNTRANSITION);
}
/*
}
index = type->bounds;
}
+
+ if (rc) {
+ char *old_name = NULL;
+ char *new_name = NULL;
+ int length;
+
+ if (!context_struct_to_string(old_context,
+ &old_name, &length) &&
+ !context_struct_to_string(new_context,
+ &new_name, &length)) {
+ audit_log(current->audit_context,
+ GFP_ATOMIC, AUDIT_SELINUX_ERR,
+ "op=security_bounded_transition "
+ "result=denied "
+ "oldcontext=%s newcontext=%s",
+ old_name, new_name);
+ }
+ kfree(new_name);
+ kfree(old_name);
+ }
out:
read_unlock(&policy_rwlock);
* gone thru the IPSec process.
*/
int selinux_xfrm_sock_rcv_skb(u32 isec_sid, struct sk_buff *skb,
- struct avc_audit_data *ad)
+ struct common_audit_data *ad)
{
int i, rc = 0;
struct sec_path *sp;
* checked in the selinux_xfrm_state_pol_flow_match hook above.
*/
int selinux_xfrm_postroute_last(u32 isec_sid, struct sk_buff *skb,
- struct avc_audit_data *ad, u8 proto)
+ struct common_audit_data *ad, u8 proto)
{
struct dst_entry *dst;
int rc = 0;
{
memset(a, 0, sizeof(*a));
a->a.type = type;
- a->a.function = func;
+ a->a.smack_audit_data.function = func;
}
static inline void smk_ad_setfield_u_tsk(struct smk_audit_info *a,
static void smack_log_callback(struct audit_buffer *ab, void *a)
{
struct common_audit_data *ad = a;
- struct smack_audit_data *sad = &ad->lsm_priv.smack_audit_data;
- audit_log_format(ab, "lsm=SMACK fn=%s action=%s", ad->function,
+ struct smack_audit_data *sad = &ad->smack_audit_data;
+ audit_log_format(ab, "lsm=SMACK fn=%s action=%s",
+ ad->smack_audit_data.function,
sad->result ? "denied" : "granted");
audit_log_format(ab, " subject=");
audit_log_untrustedstring(ab, sad->subject);
if (result == 0 && (log_policy & SMACK_AUDIT_ACCEPT) == 0)
return;
- if (a->function == NULL)
- a->function = "unknown";
+ if (a->smack_audit_data.function == NULL)
+ a->smack_audit_data.function = "unknown";
/* end preparing the audit data */
- sad = &a->lsm_priv.smack_audit_data;
+ sad = &a->smack_audit_data;
smack_str_from_perm(request_buffer, request);
sad->subject = subject_label;
sad->object = object_label;
*/
/**
- * smack_ptrace_may_access - Smack approval on PTRACE_ATTACH
+ * smack_ptrace_access_check - Smack approval on PTRACE_ATTACH
* @ctp: child task pointer
* @mode: ptrace attachment mode
*
*
* Do the capability checks, and require read and write.
*/
-static int smack_ptrace_may_access(struct task_struct *ctp, unsigned int mode)
+static int smack_ptrace_access_check(struct task_struct *ctp, unsigned int mode)
{
int rc;
struct smk_audit_info ad;
char *sp, *tsp;
- rc = cap_ptrace_may_access(ctp, mode);
+ rc = cap_ptrace_access_check(ctp, mode);
if (rc != 0)
return rc;
* Task hooks
*/
+/**
+ * smack_cred_alloc_blank - "allocate" blank task-level security credentials
+ * @new: the new credentials
+ * @gfp: the atomicity of any memory allocations
+ *
+ * Prepare a blank set of credentials for modification. This must allocate all
+ * the memory the LSM module might require such that cred_transfer() can
+ * complete without error.
+ */
+static int smack_cred_alloc_blank(struct cred *cred, gfp_t gfp)
+{
+ cred->security = NULL;
+ return 0;
+}
+
+
/**
* smack_cred_free - "free" task-level security credentials
* @cred: the credentials in question
{
}
+/**
+ * smack_cred_transfer - Transfer the old credentials to the new credentials
+ * @new: the new credentials
+ * @old: the original credentials
+ *
+ * Fill in a set of blank credentials from another set of credentials.
+ */
+static void smack_cred_transfer(struct cred *new, const struct cred *old)
+{
+ new->security = old->security;
+}
+
/**
* smack_kernel_act_as - Set the subjective context in a set of credentials
* @new: points to the set of credentials to be modified.
if (strcmp(name, XATTR_SMACK_SUFFIX) == 0) {
nsp->smk_inode = sp;
+ nsp->smk_flags |= SMK_INODE_INSTANT;
return 0;
}
/*
/*
* Perfectly reasonable for this to be NULL
*/
- if (sip == NULL || sip->sin_family != PF_INET)
+ if (sip == NULL || sip->sin_family != AF_INET)
return 0;
return smack_netlabel_send(sock->sk, sip);
{
}
+static int smack_inode_notifysecctx(struct inode *inode, void *ctx, u32 ctxlen)
+{
+ return smack_inode_setsecurity(inode, XATTR_SMACK_SUFFIX, ctx, ctxlen, 0);
+}
+
+static int smack_inode_setsecctx(struct dentry *dentry, void *ctx, u32 ctxlen)
+{
+ return __vfs_setxattr_noperm(dentry, XATTR_NAME_SMACK, ctx, ctxlen, 0);
+}
+
+static int smack_inode_getsecctx(struct inode *inode, void **ctx, u32 *ctxlen)
+{
+ int len = 0;
+ len = smack_inode_getsecurity(inode, XATTR_SMACK_SUFFIX, ctx, true);
+
+ if (len < 0)
+ return len;
+ *ctxlen = len;
+ return 0;
+}
+
struct security_operations smack_ops = {
.name = "smack",
- .ptrace_may_access = smack_ptrace_may_access,
+ .ptrace_access_check = smack_ptrace_access_check,
.ptrace_traceme = smack_ptrace_traceme,
.syslog = smack_syslog,
.file_send_sigiotask = smack_file_send_sigiotask,
.file_receive = smack_file_receive,
+ .cred_alloc_blank = smack_cred_alloc_blank,
.cred_free = smack_cred_free,
.cred_prepare = smack_cred_prepare,
.cred_commit = smack_cred_commit,
+ .cred_transfer = smack_cred_transfer,
.kernel_act_as = smack_kernel_act_as,
.kernel_create_files_as = smack_kernel_create_files_as,
.task_setpgid = smack_task_setpgid,
.secid_to_secctx = smack_secid_to_secctx,
.secctx_to_secid = smack_secctx_to_secid,
.release_secctx = smack_release_secctx,
+ .inode_notifysecctx = smack_inode_notifysecctx,
+ .inode_setsecctx = smack_inode_setsecctx,
+ .inode_getsecctx = smack_inode_getsecctx,
};
return true;
}
+/**
+ * tomoyo_delete_domain - Delete a domain.
+ *
+ * @domainname: The name of domain.
+ *
+ * Returns 0.
+ */
+static int tomoyo_delete_domain(char *domainname)
+{
+ struct tomoyo_domain_info *domain;
+ struct tomoyo_path_info name;
+
+ name.name = domainname;
+ tomoyo_fill_path_info(&name);
+ down_write(&tomoyo_domain_list_lock);
+ /* Is there an active domain? */
+ list_for_each_entry(domain, &tomoyo_domain_list, list) {
+ /* Never delete tomoyo_kernel_domain */
+ if (domain == &tomoyo_kernel_domain)
+ continue;
+ if (domain->is_deleted ||
+ tomoyo_pathcmp(domain->domainname, &name))
+ continue;
+ domain->is_deleted = true;
+ break;
+ }
+ up_write(&tomoyo_domain_list_lock);
+ return 0;
+}
+
/**
* tomoyo_write_domain_policy - Write domain policy.
*
const char *tomoyo_get_msg(const bool is_enforce);
/* Convert single path operation to operation name. */
const char *tomoyo_sp2keyword(const u8 operation);
-/* Delete a domain. */
-int tomoyo_delete_domain(char *data);
/* Create "alias" entry in exception policy. */
int tomoyo_write_alias_policy(char *data, const bool is_delete);
/*
return tomoyo_update_alias_entry(data, cp, is_delete);
}
-/* Domain create/delete handler. */
-
-/**
- * tomoyo_delete_domain - Delete a domain.
- *
- * @domainname: The name of domain.
- *
- * Returns 0.
- */
-int tomoyo_delete_domain(char *domainname)
-{
- struct tomoyo_domain_info *domain;
- struct tomoyo_path_info name;
-
- name.name = domainname;
- tomoyo_fill_path_info(&name);
- down_write(&tomoyo_domain_list_lock);
- /* Is there an active domain? */
- list_for_each_entry(domain, &tomoyo_domain_list, list) {
- /* Never delete tomoyo_kernel_domain */
- if (domain == &tomoyo_kernel_domain)
- continue;
- if (domain->is_deleted ||
- tomoyo_pathcmp(domain->domainname, &name))
- continue;
- domain->is_deleted = true;
- break;
- }
- up_write(&tomoyo_domain_list_lock);
- return 0;
-}
-
/**
* tomoyo_find_or_assign_new_domain - Create a domain.
*
/**
* tomoyo_find_next_domain - Find a domain.
*
- * @bprm: Pointer to "struct linux_binprm".
- * @next_domain: Pointer to pointer to "struct tomoyo_domain_info".
+ * @bprm: Pointer to "struct linux_binprm".
*
* Returns 0 on success, negative value otherwise.
*/
-int tomoyo_find_next_domain(struct linux_binprm *bprm,
- struct tomoyo_domain_info **next_domain)
+int tomoyo_find_next_domain(struct linux_binprm *bprm)
{
/*
* This function assumes that the size of buffer returned by
tomoyo_set_domain_flag(old_domain, false,
TOMOYO_DOMAIN_FLAGS_TRANSITION_FAILED);
out:
+ if (!domain)
+ domain = old_domain;
+ bprm->cred->security = domain;
tomoyo_free(real_program_name);
tomoyo_free(symlink_program_name);
- *next_domain = domain ? domain : old_domain;
tomoyo_free(tmp);
return retval;
}
#include "tomoyo.h"
#include "realpath.h"
+static int tomoyo_cred_alloc_blank(struct cred *new, gfp_t gfp)
+{
+ new->security = NULL;
+ return 0;
+}
+
static int tomoyo_cred_prepare(struct cred *new, const struct cred *old,
gfp_t gfp)
{
return 0;
}
+static void tomoyo_cred_transfer(struct cred *new, const struct cred *old)
+{
+ /*
+ * Since "struct tomoyo_domain_info *" is a sharable pointer,
+ * we don't need to duplicate.
+ */
+ new->security = old->security;
+}
+
static int tomoyo_bprm_set_creds(struct linux_binprm *bprm)
{
int rc;
* Execute permission is checked against pathname passed to do_execve()
* using current domain.
*/
- if (!domain) {
- struct tomoyo_domain_info *next_domain = NULL;
- int retval = tomoyo_find_next_domain(bprm, &next_domain);
-
- if (!retval)
- bprm->cred->security = next_domain;
- return retval;
- }
+ if (!domain)
+ return tomoyo_find_next_domain(bprm);
/*
* Read permission is checked against interpreters using next domain.
* '1' is the result of open_to_namei_flags(O_RDONLY).
*/
static struct security_operations tomoyo_security_ops = {
.name = "tomoyo",
+ .cred_alloc_blank = tomoyo_cred_alloc_blank,
.cred_prepare = tomoyo_cred_prepare,
+ .cred_transfer = tomoyo_cred_transfer,
.bprm_set_creds = tomoyo_bprm_set_creds,
.bprm_check_security = tomoyo_bprm_check_security,
#ifdef CONFIG_SYSCTL
struct path *path2);
int tomoyo_check_rewrite_permission(struct tomoyo_domain_info *domain,
struct file *filp);
-int tomoyo_find_next_domain(struct linux_binprm *bprm,
- struct tomoyo_domain_info **next_domain);
+int tomoyo_find_next_domain(struct linux_binprm *bprm);
/* Index numbers for Access Controls. */
bool
default n
+config SOUND_OSS_CORE_PRECLAIM
+ bool "Preclaim OSS device numbers"
+ depends on SOUND_OSS_CORE
+ default y
+ help
+ With this option enabled, the kernel will claim all OSS device
+ numbers if any OSS support (native or emulation) is enabled
+ whether the respective module is loaded or not and try to load the
+ appropriate module using sound-slot/service-* and char-major-*
+ module aliases when one of the device numbers is opened. With
+ this option disabled, kernel will only claim actually in-use
+ device numbers and opening a missing device will generate only the
+ standard char-major-* aliases.
+
+ The only visible difference is use of additional module aliases
+ and whether OSS sound devices appear multiple times in
+ /proc/devices. sound-slot/service-* module aliases are scheduled
+ to be removed (ie. PRECLAIM won't be available) and this option is
+ to make the transition easier. This option can be overridden
+ during boot using the kernel parameter soundcore.preclaim_oss.
+
+ Disabling this allows alternative OSS implementations.
+
+ Please read Documentation/feature-removal-schedule.txt for
+ details.
+
+ If unusre, say Y.
+
source "sound/oss/dmasound/Kconfig"
if !M68K
if (!old && notify) {
irq_client = kzalloc(sizeof(struct pmf_irq_client),
GFP_KERNEL);
+ if (!irq_client) {
+ err = -ENOMEM;
+ goto out_unlock;
+ }
irq_client->data = notif;
irq_client->handler = pmf_handle_notify_irq;
irq_client->owner = THIS_MODULE;
struct snd_ac97_bus *ac97_bus;
struct snd_ac97_template ac97_template;
int ret;
+ pxa2xx_audio_ops_t *pdata = dev->dev.platform_data;
+
+ if (dev->id >= 0) {
+ dev_err(&dev->dev, "PXA2xx has only one AC97 port.\n");
+ ret = -ENXIO;
+ goto err_dev;
+ }
ret = snd_card_create(SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1,
THIS_MODULE, 0, &card);
snprintf(card->longname, sizeof(card->longname),
"%s (%s)", dev->dev.driver->name, card->mixername);
+ if (pdata && pdata->codec_pdata[0])
+ snd_ac97_dev_add_pdata(ac97_bus->codec[0], pdata->codec_pdata[0]);
snd_card_set_dev(card, &dev->dev);
ret = snd_card_register(card);
if (ret == 0) {
err:
if (card)
snd_card_free(card);
+err_dev:
return ret;
}
{
struct pxa2xx_runtime_data *rtd = substream->runtime->private_data;
- if (rtd && rtd->params)
+ if (rtd && rtd->params && rtd->params->drcmr)
*rtd->params->drcmr = 0;
snd_pcm_set_runtime_buffer(substream, NULL);
{
struct pxa2xx_runtime_data *prtd = substream->runtime->private_data;
+ if (!prtd || !prtd->params)
+ return 0;
+
DCSR(prtd->dma_ch) &= ~DCSR_RUN;
DCSR(prtd->dma_ch) = 0;
DCMD(prtd->dma_ch) = 0;
config SND_VMASTER
bool
+config SND_DMA_SGBUF
+ def_bool y
+ depends on X86
+
source "sound/core/seq/Kconfig"
pcm_memory.o
snd-page-alloc-y := memalloc.o
-snd-page-alloc-$(CONFIG_HAS_DMA) += sgbuf.o
+snd-page-alloc-$(CONFIG_SND_DMA_SGBUF) += sgbuf.o
snd-rawmidi-objs := rawmidi.o
snd-timer-objs := timer.o
EXPORT_SYMBOL(snd_ctl_remove_id);
/**
- * snd_ctl_remove_unlocked_id - remove the unlocked control of the given id and release it
+ * snd_ctl_remove_user_ctl - remove and release the unlocked user control
* @file: active control handle
* @id: the control id to remove
*
*
* Returns 0 if successful, or a negative error code on failure.
*/
-static int snd_ctl_remove_unlocked_id(struct snd_ctl_file * file,
- struct snd_ctl_elem_id *id)
+static int snd_ctl_remove_user_ctl(struct snd_ctl_file * file,
+ struct snd_ctl_elem_id *id)
{
struct snd_card *card = file->card;
struct snd_kcontrol *kctl;
down_write(&card->controls_rwsem);
kctl = snd_ctl_find_id(card, id);
if (kctl == NULL) {
- up_write(&card->controls_rwsem);
- return -ENOENT;
+ ret = -ENOENT;
+ goto error;
+ }
+ if (!(kctl->vd[0].access & SNDRV_CTL_ELEM_ACCESS_USER)) {
+ ret = -EINVAL;
+ goto error;
}
for (idx = 0; idx < kctl->count; idx++)
if (kctl->vd[idx].owner != NULL && kctl->vd[idx].owner != file) {
- up_write(&card->controls_rwsem);
- return -EBUSY;
+ ret = -EBUSY;
+ goto error;
}
ret = snd_ctl_remove(card, kctl);
+ if (ret < 0)
+ goto error;
+ card->user_ctl_count--;
+error:
up_write(&card->controls_rwsem);
return ret;
}
if (card->user_ctl_count >= MAX_USER_CONTROLS)
return -ENOMEM;
- if (info->count > 1024)
+ if (info->count < 1)
return -EINVAL;
access = info->access == 0 ? SNDRV_CTL_ELEM_ACCESS_READWRITE :
(info->access & (SNDRV_CTL_ELEM_ACCESS_READWRITE|
struct snd_ctl_elem_id __user *_id)
{
struct snd_ctl_elem_id id;
- int err;
if (copy_from_user(&id, _id, sizeof(id)))
return -EFAULT;
- err = snd_ctl_remove_unlocked_id(file, &id);
- if (! err) {
- struct snd_card *card = file->card;
- down_write(&card->controls_rwsem);
- card->user_ctl_count--;
- up_write(&card->controls_rwsem);
- }
- return err;
+ return snd_ctl_remove_user_ctl(file, &id);
}
static int snd_ctl_subscribe_events(struct snd_ctl_file *file, int __user *ptr)
char *nbuf;
nsize = PAGE_ALIGN(nsize);
- nbuf = kmalloc(nsize, GFP_KERNEL);
+ nbuf = krealloc(buffer->buffer, nsize, GFP_KERNEL);
if (! nbuf)
return -ENOMEM;
- memcpy(nbuf, buffer->buffer, buffer->len);
- kfree(buffer->buffer);
buffer->buffer = nbuf;
buffer->len = nsize;
return 0;
*
* Returns the size of output string.
*/
-int snd_iprintf(struct snd_info_buffer *buffer, char *fmt,...)
+int snd_iprintf(struct snd_info_buffer *buffer, const char *fmt, ...)
{
va_list args;
int len, res;
* Returns the updated pointer of the original string so that
* it can be used for the next call.
*/
-char *snd_info_get_str(char *dest, char *src, int len)
+const char *snd_info_get_str(char *dest, const char *src, int len)
{
int c;
#include <sound/control.h>
#include <sound/info.h>
+/* monitor files for graceful shutdown (hotplug) */
+struct snd_monitor_file {
+ struct file *file;
+ const struct file_operations *disconnected_f_op;
+ struct list_head shutdown_list; /* still need to shutdown */
+ struct list_head list; /* link of monitor files */
+};
+
static DEFINE_SPINLOCK(shutdown_lock);
static LIST_HEAD(shutdown_files);
case SNDRV_DMA_TYPE_DEV:
dmab->area = snd_malloc_dev_pages(device, size, &dmab->addr);
break;
+#endif
+#ifdef CONFIG_SND_DMA_SGBUF
case SNDRV_DMA_TYPE_DEV_SG:
snd_malloc_sgbuf_pages(device, size, dmab, NULL);
break;
case SNDRV_DMA_TYPE_DEV:
snd_free_dev_pages(dmab->dev.dev, dmab->bytes, dmab->area, dmab->addr);
break;
+#endif
+#ifdef CONFIG_SND_DMA_SGBUF
case SNDRV_DMA_TYPE_DEV_SG:
snd_free_sgbuf_pages(dmab);
break;
#include <linux/ioport.h>
#include <sound/core.h>
+#ifdef CONFIG_SND_DEBUG
+
+#ifdef CONFIG_SND_DEBUG_VERBOSE
+#define DEFAULT_DEBUG_LEVEL 2
+#else
+#define DEFAULT_DEBUG_LEVEL 1
+#endif
+
+static int debug = DEFAULT_DEBUG_LEVEL;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Debug level (0 = disable)");
+
+#endif /* CONFIG_SND_DEBUG */
+
void release_and_free_resource(struct resource *res)
{
if (res) {
EXPORT_SYMBOL(release_and_free_resource);
#ifdef CONFIG_SND_VERBOSE_PRINTK
-void snd_verbose_printk(const char *file, int line, const char *format, ...)
+/* strip the leading path if the given path is absolute */
+static const char *sanity_file_name(const char *path)
{
- va_list args;
-
- if (format[0] == '<' && format[1] >= '0' && format[1] <= '7' && format[2] == '>') {
- char tmp[] = "<0>";
+ if (*path == '/')
+ return strrchr(path, '/') + 1;
+ else
+ return path;
+}
+
+/* print file and line with a certain printk prefix */
+static int print_snd_pfx(unsigned int level, const char *path, int line,
+ const char *format)
+{
+ const char *file = sanity_file_name(path);
+ char tmp[] = "<0>";
+ const char *pfx = level ? KERN_DEBUG : KERN_DEFAULT;
+ int ret = 0;
+
+ if (format[0] == '<' && format[2] == '>') {
tmp[1] = format[1];
- printk("%sALSA %s:%d: ", tmp, file, line);
- format += 3;
- } else {
- printk("ALSA %s:%d: ", file, line);
+ pfx = tmp;
+ ret = 1;
}
- va_start(args, format);
- vprintk(format, args);
- va_end(args);
+ printk("%sALSA %s:%d: ", pfx, file, line);
+ return ret;
}
-
-EXPORT_SYMBOL(snd_verbose_printk);
+#else
+#define print_snd_pfx(level, path, line, format) 0
#endif
-#if defined(CONFIG_SND_DEBUG) && defined(CONFIG_SND_VERBOSE_PRINTK)
-void snd_verbose_printd(const char *file, int line, const char *format, ...)
+#if defined(CONFIG_SND_DEBUG) || defined(CONFIG_SND_VERBOSE_PRINTK)
+void __snd_printk(unsigned int level, const char *path, int line,
+ const char *format, ...)
{
va_list args;
- if (format[0] == '<' && format[1] >= '0' && format[1] <= '7' && format[2] == '>') {
- char tmp[] = "<0>";
- tmp[1] = format[1];
- printk("%sALSA %s:%d: ", tmp, file, line);
- format += 3;
- } else {
- printk(KERN_DEBUG "ALSA %s:%d: ", file, line);
- }
+#ifdef CONFIG_SND_DEBUG
+ if (debug < level)
+ return;
+#endif
va_start(args, format);
+ if (print_snd_pfx(level, path, line, format))
+ format += 3; /* skip the printk level-prefix */
vprintk(format, args);
va_end(args);
-
}
-
-EXPORT_SYMBOL(snd_verbose_printd);
+EXPORT_SYMBOL_GPL(__snd_printk);
#endif
#ifdef CONFIG_PCI
struct snd_info_buffer *buffer)
{
struct snd_mixer_oss *mixer = entry->private_data;
- char line[128], str[32], idxstr[16], *cptr;
+ char line[128], str[32], idxstr[16];
+ const char *cptr;
int ch, idx;
struct snd_mixer_oss_assign_table *tbl;
struct slot *slot;
runtime->oss.channels = params_channels(params);
runtime->oss.rate = params_rate(params);
- runtime->oss.params = 0;
- runtime->oss.prepare = 1;
vfree(runtime->oss.buffer);
runtime->oss.buffer = vmalloc(runtime->oss.period_bytes);
+ if (!runtime->oss.buffer) {
+ err = -ENOMEM;
+ goto failure;
+ }
+
+ runtime->oss.params = 0;
+ runtime->oss.prepare = 1;
runtime->oss.buffer_used = 0;
if (runtime->dma_area)
snd_pcm_format_set_silence(runtime->format, runtime->dma_area, bytes_to_samples(runtime, runtime->dma_bytes));
struct snd_info_buffer *buffer)
{
struct snd_pcm_str *pstr = entry->private_data;
- char line[128], str[32], task_name[32], *ptr;
+ char line[128], str[32], task_name[32];
+ const char *ptr;
int idx1;
struct snd_pcm_oss_setup *setup, *setup1, template;
return -ENOIOCTLCMD;
}
-#ifdef CONFIG_SND_VERBOSE_PROCFS
-
-#define STATE(v) [SNDRV_PCM_STATE_##v] = #v
-#define STREAM(v) [SNDRV_PCM_STREAM_##v] = #v
-#define READY(v) [SNDRV_PCM_READY_##v] = #v
-#define XRUN(v) [SNDRV_PCM_XRUN_##v] = #v
-#define SILENCE(v) [SNDRV_PCM_SILENCE_##v] = #v
-#define TSTAMP(v) [SNDRV_PCM_TSTAMP_##v] = #v
-#define ACCESS(v) [SNDRV_PCM_ACCESS_##v] = #v
-#define START(v) [SNDRV_PCM_START_##v] = #v
#define FORMAT(v) [SNDRV_PCM_FORMAT_##v] = #v
-#define SUBFORMAT(v) [SNDRV_PCM_SUBFORMAT_##v] = #v
static char *snd_pcm_format_names[] = {
FORMAT(S8),
FORMAT(U18_3BE),
};
-static const char *snd_pcm_format_name(snd_pcm_format_t format)
+const char *snd_pcm_format_name(snd_pcm_format_t format)
{
return snd_pcm_format_names[format];
}
+EXPORT_SYMBOL_GPL(snd_pcm_format_name);
+
+#ifdef CONFIG_SND_VERBOSE_PROCFS
+
+#define STATE(v) [SNDRV_PCM_STATE_##v] = #v
+#define STREAM(v) [SNDRV_PCM_STREAM_##v] = #v
+#define READY(v) [SNDRV_PCM_READY_##v] = #v
+#define XRUN(v) [SNDRV_PCM_XRUN_##v] = #v
+#define SILENCE(v) [SNDRV_PCM_SILENCE_##v] = #v
+#define TSTAMP(v) [SNDRV_PCM_TSTAMP_##v] = #v
+#define ACCESS(v) [SNDRV_PCM_ACCESS_##v] = #v
+#define START(v) [SNDRV_PCM_START_##v] = #v
+#define SUBFORMAT(v) [SNDRV_PCM_SUBFORMAT_##v] = #v
static char *snd_pcm_stream_names[] = {
STREAM(PLAYBACK),
avail = snd_pcm_capture_avail(runtime);
if (avail > runtime->avail_max)
runtime->avail_max = avail;
- if (avail >= runtime->stop_threshold) {
- if (substream->runtime->status->state == SNDRV_PCM_STATE_DRAINING)
+ if (runtime->status->state == SNDRV_PCM_STATE_DRAINING) {
+ if (avail >= runtime->buffer_size) {
snd_pcm_drain_done(substream);
- else
+ return -EPIPE;
+ }
+ } else {
+ if (avail >= runtime->stop_threshold) {
xrun(substream);
- return -EPIPE;
+ return -EPIPE;
+ }
}
if (avail >= runtime->control->avail_min)
wake_up(&runtime->sleep);
xrun(substream);
return -EPIPE;
}
+ if (xrun_debug(substream, 8)) {
+ char name[16];
+ pcm_debug_name(substream, name, sizeof(name));
+ snd_printd("period_update: %s: pos=0x%x/0x%x/0x%x, "
+ "hwptr=0x%lx, hw_base=0x%lx, hw_intr=0x%lx\n",
+ name, (unsigned int)pos,
+ (unsigned int)runtime->period_size,
+ (unsigned int)runtime->buffer_size,
+ (unsigned long)old_hw_ptr,
+ (unsigned long)runtime->hw_ptr_base,
+ (unsigned long)runtime->hw_ptr_interrupt);
+ }
hw_base = runtime->hw_ptr_base;
new_hw_ptr = hw_base + pos;
hw_ptr_interrupt = runtime->hw_ptr_interrupt + runtime->period_size;
delta = new_hw_ptr - hw_ptr_interrupt;
}
if (delta < 0) {
- delta += runtime->buffer_size;
+ if (runtime->periods == 1 || new_hw_ptr < old_hw_ptr)
+ delta += runtime->buffer_size;
if (delta < 0) {
hw_ptr_error(substream,
"Unexpected hw_pointer value "
"(stream=%i, pos=%ld, intr_ptr=%ld)\n",
substream->stream, (long)pos,
(long)hw_ptr_interrupt);
+#if 1
+ /* simply skipping the hwptr update seems more
+ * robust in some cases, e.g. on VMware with
+ * inaccurate timer source
+ */
+ return 0; /* skip this update */
+#else
/* rebase to interrupt position */
hw_base = new_hw_ptr = hw_ptr_interrupt;
/* align hw_base to buffer_size */
hw_base -= hw_base % runtime->buffer_size;
delta = 0;
+#endif
} else {
hw_base += runtime->buffer_size;
if (hw_base >= runtime->boundary)
xrun(substream);
return -EPIPE;
}
+ if (xrun_debug(substream, 16)) {
+ char name[16];
+ pcm_debug_name(substream, name, sizeof(name));
+ snd_printd("hw_update: %s: pos=0x%x/0x%x/0x%x, "
+ "hwptr=0x%lx, hw_base=0x%lx, hw_intr=0x%lx\n",
+ name, (unsigned int)pos,
+ (unsigned int)runtime->period_size,
+ (unsigned int)runtime->buffer_size,
+ (unsigned long)old_hw_ptr,
+ (unsigned long)runtime->hw_ptr_base,
+ (unsigned long)runtime->hw_ptr_interrupt);
+ }
+
hw_base = runtime->hw_ptr_base;
new_hw_ptr = hw_base + pos;
int snd_interval_list(struct snd_interval *i, unsigned int count, unsigned int *list, unsigned int mask)
{
unsigned int k;
- int changed = 0;
+ struct snd_interval list_range;
if (!count) {
i->empty = 1;
return -EINVAL;
}
+ snd_interval_any(&list_range);
+ list_range.min = UINT_MAX;
+ list_range.max = 0;
for (k = 0; k < count; k++) {
if (mask && !(mask & (1 << k)))
continue;
- if (i->min == list[k] && !i->openmin)
- goto _l1;
- if (i->min < list[k]) {
- i->min = list[k];
- i->openmin = 0;
- changed = 1;
- goto _l1;
- }
- }
- i->empty = 1;
- return -EINVAL;
- _l1:
- for (k = count; k-- > 0;) {
- if (mask && !(mask & (1 << k)))
+ if (!snd_interval_test(i, list[k]))
continue;
- if (i->max == list[k] && !i->openmax)
- goto _l2;
- if (i->max > list[k]) {
- i->max = list[k];
- i->openmax = 0;
- changed = 1;
- goto _l2;
- }
+ list_range.min = min(list_range.min, list[k]);
+ list_range.max = max(list_range.max, list[k]);
}
- i->empty = 1;
- return -EINVAL;
- _l2:
- if (snd_interval_checkempty(i)) {
- i->empty = 1;
- return -EINVAL;
- }
- return changed;
+ return snd_interval_refine(i, &list_range);
}
EXPORT_SYMBOL(snd_interval_list);
EXPORT_SYMBOL(snd_pcm_lib_preallocate_pages_for_all);
+#ifdef CONFIG_SND_DMA_SGBUF
/**
* snd_pcm_sgbuf_ops_page - get the page struct at the given offset
* @substream: the pcm substream instance
return size;
}
EXPORT_SYMBOL(snd_pcm_sgbuf_get_chunk_size);
+#endif /* CONFIG_SND_DMA_SGBUF */
/**
* snd_pcm_lib_malloc_pages - allocate the DMA buffer
static int snd_pcm_pre_drain_init(struct snd_pcm_substream *substream, int state)
{
- if (substream->f_flags & O_NONBLOCK)
- return -EAGAIN;
substream->runtime->trigger_master = substream;
return 0;
}
struct drain_rec {
struct snd_pcm_substream *substream;
wait_queue_t wait;
- snd_pcm_uframes_t stop_threshold;
};
static int snd_pcm_drop(struct snd_pcm_substream *substream);
* After this call, all streams are supposed to be either SETUP or DRAINING
* (capture only) state.
*/
-static int snd_pcm_drain(struct snd_pcm_substream *substream)
+static int snd_pcm_drain(struct snd_pcm_substream *substream,
+ struct file *file)
{
struct snd_card *card;
struct snd_pcm_runtime *runtime;
struct snd_pcm_substream *s;
int result = 0;
int i, num_drecs;
+ int nonblock = 0;
struct drain_rec *drec, drec_tmp, *d;
card = substream->pcm->card;
}
}
+ if (file) {
+ if (file->f_flags & O_NONBLOCK)
+ nonblock = 1;
+ } else if (substream->f_flags & O_NONBLOCK)
+ nonblock = 1;
+
+ if (nonblock)
+ goto lock; /* no need to allocate waitqueues */
+
/* allocate temporary record for drain sync */
down_read(&snd_pcm_link_rwsem);
if (snd_pcm_stream_linked(substream)) {
d->substream = s;
init_waitqueue_entry(&d->wait, current);
add_wait_queue(&runtime->sleep, &d->wait);
- /* stop_threshold fixup to avoid endless loop when
- * stop_threshold > buffer_size
- */
- d->stop_threshold = runtime->stop_threshold;
- if (runtime->stop_threshold > runtime->buffer_size)
- runtime->stop_threshold = runtime->buffer_size;
}
}
up_read(&snd_pcm_link_rwsem);
+ lock:
snd_pcm_stream_lock_irq(substream);
/* resume pause */
if (substream->runtime->status->state == SNDRV_PCM_STATE_PAUSED)
/* pre-start/stop - all running streams are changed to DRAINING state */
result = snd_pcm_action(&snd_pcm_action_drain_init, substream, 0);
- if (result < 0) {
- snd_pcm_stream_unlock_irq(substream);
- goto _error;
+ if (result < 0)
+ goto unlock;
+ /* in non-blocking, we don't wait in ioctl but let caller poll */
+ if (nonblock) {
+ result = -EAGAIN;
+ goto unlock;
}
for (;;) {
}
}
+ unlock:
snd_pcm_stream_unlock_irq(substream);
- _error:
- for (i = 0; i < num_drecs; i++) {
- d = &drec[i];
- runtime = d->substream->runtime;
- remove_wait_queue(&runtime->sleep, &d->wait);
- runtime->stop_threshold = d->stop_threshold;
+ if (!nonblock) {
+ for (i = 0; i < num_drecs; i++) {
+ d = &drec[i];
+ runtime = d->substream->runtime;
+ remove_wait_queue(&runtime->sleep, &d->wait);
+ }
+ if (drec != &drec_tmp)
+ kfree(drec);
}
-
- if (drec != &drec_tmp)
- kfree(drec);
snd_power_unlock(card);
return result;
case SNDRV_PCM_STATE_XRUN:
ret = -EPIPE;
goto __end;
+ case SNDRV_PCM_STATE_SUSPENDED:
+ ret = -ESTRPIPE;
+ goto __end;
default:
ret = -EBADFD;
goto __end;
case SNDRV_PCM_STATE_XRUN:
ret = -EPIPE;
goto __end;
+ case SNDRV_PCM_STATE_SUSPENDED:
+ ret = -ESTRPIPE;
+ goto __end;
default:
ret = -EBADFD;
goto __end;
case SNDRV_PCM_STATE_XRUN:
ret = -EPIPE;
goto __end;
+ case SNDRV_PCM_STATE_SUSPENDED:
+ ret = -ESTRPIPE;
+ goto __end;
default:
ret = -EBADFD;
goto __end;
case SNDRV_PCM_STATE_XRUN:
ret = -EPIPE;
goto __end;
+ case SNDRV_PCM_STATE_SUSPENDED:
+ ret = -ESTRPIPE;
+ goto __end;
default:
ret = -EBADFD;
goto __end;
return snd_pcm_hw_params_old_user(substream, arg);
#endif
case SNDRV_PCM_IOCTL_DRAIN:
- return snd_pcm_drain(substream);
+ return snd_pcm_drain(substream, file);
case SNDRV_PCM_IOCTL_DROP:
return snd_pcm_drop(substream);
case SNDRV_PCM_IOCTL_PAUSE:
return err;
substream->opened = 1;
if (substream->use_count++ == 0)
- substream->active_sensing = 1;
+ substream->active_sensing = 0;
if (mode & SNDRV_RAWMIDI_LFLG_APPEND)
substream->append = 1;
rmidi->streams[substream->stream].substream_opened++;
# Copyright (c) 1999 by Jaroslav Kysela <perex@perex.cz>
#
-ifeq ($(CONFIG_SND_SEQUENCER_OSS),y)
- obj-$(CONFIG_SND_SEQUENCER) += oss/
-endif
-
snd-seq-device-objs := seq_device.o
snd-seq-objs := seq.o seq_lock.o seq_clientmgr.o seq_memory.o seq_queue.o \
seq_fifo.o seq_prioq.o seq_timer.o \
obj-$(CONFIG_SND_SEQUENCER) += snd-seq.o snd-seq-device.o
ifeq ($(CONFIG_SND_SEQUENCER_OSS),y)
-obj-$(CONFIG_SND_SEQUENCER) += snd-seq-midi-event.o
+ obj-$(CONFIG_SND_SEQUENCER) += snd-seq-midi-event.o
+ obj-$(CONFIG_SND_SEQUENCER) += oss/
endif
obj-$(CONFIG_SND_SEQ_DUMMY) += snd-seq-dummy.o
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <sound/asoundef.h>
#include "seq_oss_midi.h"
#include "seq_oss_readq.h"
#include "seq_oss_timer.h"
ev.source.port = dp->port;
if (dp->seq_mode == SNDRV_SEQ_OSS_MODE_SYNTH) {
ev.type = SNDRV_SEQ_EVENT_SENSING;
- snd_seq_oss_dispatch(dp, &ev, 0, 0); /* active sensing */
+ snd_seq_oss_dispatch(dp, &ev, 0, 0);
}
for (c = 0; c < 16; c++) {
ev.type = SNDRV_SEQ_EVENT_CONTROLLER;
ev.data.control.channel = c;
- ev.data.control.param = 123;
- snd_seq_oss_dispatch(dp, &ev, 0, 0); /* all notes off */
+ ev.data.control.param = MIDI_CTL_ALL_NOTES_OFF;
+ snd_seq_oss_dispatch(dp, &ev, 0, 0);
if (dp->seq_mode == SNDRV_SEQ_OSS_MODE_MUSIC) {
- ev.data.control.param = 121;
- snd_seq_oss_dispatch(dp, &ev, 0, 0); /* reset all controllers */
+ ev.data.control.param =
+ MIDI_CTL_RESET_CONTROLLERS;
+ snd_seq_oss_dispatch(dp, &ev, 0, 0);
ev.type = SNDRV_SEQ_EVENT_PITCHBEND;
ev.data.control.value = 0;
- snd_seq_oss_dispatch(dp, &ev, 0, 0); /* bender off */
+ snd_seq_oss_dispatch(dp, &ev, 0, 0);
}
}
}
return -EINVAL;
runtime = substream->runtime;
if ((tmp = runtime->avail) < count) {
- snd_printd("warning, output event was lost (count = %i, available = %i)\n", count, tmp);
+ if (printk_ratelimit())
+ snd_printk(KERN_ERR "MIDI output buffer overrun\n");
return -ENOMEM;
}
if (snd_rawmidi_kernel_write(substream, buf, count) < count)
memset(¶ms, 0, sizeof(params));
params.avail_min = 1;
params.buffer_size = output_buffer_size;
+ params.no_active_sensing = 1;
if ((err = snd_rawmidi_output_params(msynth->output_rfile.output, ¶ms)) < 0) {
snd_rawmidi_kernel_release(&msynth->output_rfile);
return err;
static int midisynth_unuse(void *private_data, struct snd_seq_port_subscribe *info)
{
struct seq_midisynth *msynth = private_data;
- unsigned char buf = 0xff; /* MIDI reset */
if (snd_BUG_ON(!msynth->output_rfile.output))
return -EINVAL;
- /* sending single MIDI reset message to shut the device up */
- snd_rawmidi_kernel_write(msynth->output_rfile.output, &buf, 1);
snd_rawmidi_drain_output(msynth->output_rfile.output);
return snd_rawmidi_kernel_release(&msynth->output_rfile);
}
*
* The optional argument @tlv can be used to specify the TLV information
* for dB scale of the master control. It should be a single element
- * with #SNDRV_CTL_TLVT_DB_SCALE type, and should be the max 0dB.
+ * with #SNDRV_CTL_TLVT_DB_SCALE, #SNDRV_CTL_TLV_DB_MINMAX or
+ * #SNDRV_CTL_TLVT_DB_MINMAX_MUTE type, and should be the max 0dB.
*/
struct snd_kcontrol *snd_ctl_make_virtual_master(char *name,
const unsigned int *tlv)
kctl->private_free = master_free;
/* additional (constant) TLV read */
- if (tlv && tlv[0] == SNDRV_CTL_TLVT_DB_SCALE) {
+ if (tlv &&
+ (tlv[0] == SNDRV_CTL_TLVT_DB_SCALE ||
+ tlv[0] == SNDRV_CTL_TLVT_DB_MINMAX ||
+ tlv[0] == SNDRV_CTL_TLVT_DB_MINMAX_MUTE)) {
kctl->vd[0].access |= SNDRV_CTL_ELEM_ACCESS_TLV_READ;
memcpy(master->tlv, tlv, sizeof(master->tlv));
kctl->tlv.p = master->tlv;
#include <linux/slab.h>
#include <linux/time.h>
#include <linux/wait.h>
+#include <linux/hrtimer.h>
+#include <linux/math64.h>
#include <linux/moduleparam.h>
#include <sound/core.h>
#include <sound/control.h>
#include <sound/tlv.h>
#include <sound/pcm.h>
#include <sound/rawmidi.h>
+#include <sound/info.h>
#include <sound/initval.h>
MODULE_AUTHOR("Jaroslav Kysela <perex@perex.cz>");
MODULE_SUPPORTED_DEVICE("{{ALSA,Dummy soundcard}}");
#define MAX_PCM_DEVICES 4
-#define MAX_PCM_SUBSTREAMS 16
+#define MAX_PCM_SUBSTREAMS 128
#define MAX_MIDI_DEVICES 2
#if 0 /* emu10k1 emulation */
static int pcm_devs[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 1};
static int pcm_substreams[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 8};
//static int midi_devs[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 2};
+#ifdef CONFIG_HIGH_RES_TIMERS
+static int hrtimer = 1;
+#endif
+static int fake_buffer = 1;
module_param_array(index, int, NULL, 0444);
MODULE_PARM_DESC(index, "Index value for dummy soundcard.");
MODULE_PARM_DESC(pcm_substreams, "PCM substreams # (1-16) for dummy driver.");
//module_param_array(midi_devs, int, NULL, 0444);
//MODULE_PARM_DESC(midi_devs, "MIDI devices # (0-2) for dummy driver.");
+module_param(fake_buffer, bool, 0444);
+MODULE_PARM_DESC(fake_buffer, "Fake buffer allocations.");
+#ifdef CONFIG_HIGH_RES_TIMERS
+module_param(hrtimer, bool, 0644);
+MODULE_PARM_DESC(hrtimer, "Use hrtimer as the timer source.");
+#endif
static struct platform_device *devices[SNDRV_CARDS];
#define MIXER_ADDR_CD 4
#define MIXER_ADDR_LAST 4
+struct dummy_timer_ops {
+ int (*create)(struct snd_pcm_substream *);
+ void (*free)(struct snd_pcm_substream *);
+ int (*prepare)(struct snd_pcm_substream *);
+ int (*start)(struct snd_pcm_substream *);
+ int (*stop)(struct snd_pcm_substream *);
+ snd_pcm_uframes_t (*pointer)(struct snd_pcm_substream *);
+};
+
struct snd_dummy {
struct snd_card *card;
struct snd_pcm *pcm;
spinlock_t mixer_lock;
int mixer_volume[MIXER_ADDR_LAST+1][2];
int capture_source[MIXER_ADDR_LAST+1][2];
+ const struct dummy_timer_ops *timer_ops;
};
-struct snd_dummy_pcm {
- struct snd_dummy *dummy;
+/*
+ * system timer interface
+ */
+
+struct dummy_systimer_pcm {
spinlock_t lock;
struct timer_list timer;
- unsigned int pcm_buffer_size;
- unsigned int pcm_period_size;
- unsigned int pcm_bps; /* bytes per second */
- unsigned int pcm_hz; /* HZ */
- unsigned int pcm_irq_pos; /* IRQ position */
- unsigned int pcm_buf_pos; /* position in buffer */
+ unsigned long base_time;
+ unsigned int frac_pos; /* fractional sample position (based HZ) */
+ unsigned int frac_period_rest;
+ unsigned int frac_buffer_size; /* buffer_size * HZ */
+ unsigned int frac_period_size; /* period_size * HZ */
+ unsigned int rate;
+ int elapsed;
struct snd_pcm_substream *substream;
};
-
-static inline void snd_card_dummy_pcm_timer_start(struct snd_dummy_pcm *dpcm)
+static void dummy_systimer_rearm(struct dummy_systimer_pcm *dpcm)
{
- dpcm->timer.expires = 1 + jiffies;
+ dpcm->timer.expires = jiffies +
+ (dpcm->frac_period_rest + dpcm->rate - 1) / dpcm->rate;
add_timer(&dpcm->timer);
}
-static inline void snd_card_dummy_pcm_timer_stop(struct snd_dummy_pcm *dpcm)
+static void dummy_systimer_update(struct dummy_systimer_pcm *dpcm)
{
- del_timer(&dpcm->timer);
+ unsigned long delta;
+
+ delta = jiffies - dpcm->base_time;
+ if (!delta)
+ return;
+ dpcm->base_time += delta;
+ delta *= dpcm->rate;
+ dpcm->frac_pos += delta;
+ while (dpcm->frac_pos >= dpcm->frac_buffer_size)
+ dpcm->frac_pos -= dpcm->frac_buffer_size;
+ while (dpcm->frac_period_rest <= delta) {
+ dpcm->elapsed++;
+ dpcm->frac_period_rest += dpcm->frac_period_size;
+ }
+ dpcm->frac_period_rest -= delta;
}
-static int snd_card_dummy_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+static int dummy_systimer_start(struct snd_pcm_substream *substream)
{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct snd_dummy_pcm *dpcm = runtime->private_data;
- int err = 0;
+ struct dummy_systimer_pcm *dpcm = substream->runtime->private_data;
+ spin_lock(&dpcm->lock);
+ dpcm->base_time = jiffies;
+ dummy_systimer_rearm(dpcm);
+ spin_unlock(&dpcm->lock);
+ return 0;
+}
+static int dummy_systimer_stop(struct snd_pcm_substream *substream)
+{
+ struct dummy_systimer_pcm *dpcm = substream->runtime->private_data;
spin_lock(&dpcm->lock);
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- case SNDRV_PCM_TRIGGER_RESUME:
- snd_card_dummy_pcm_timer_start(dpcm);
- break;
- case SNDRV_PCM_TRIGGER_STOP:
- case SNDRV_PCM_TRIGGER_SUSPEND:
- snd_card_dummy_pcm_timer_stop(dpcm);
- break;
- default:
- err = -EINVAL;
- break;
- }
+ del_timer(&dpcm->timer);
spin_unlock(&dpcm->lock);
return 0;
}
-static int snd_card_dummy_pcm_prepare(struct snd_pcm_substream *substream)
+static int dummy_systimer_prepare(struct snd_pcm_substream *substream)
{
struct snd_pcm_runtime *runtime = substream->runtime;
- struct snd_dummy_pcm *dpcm = runtime->private_data;
- int bps;
-
- bps = snd_pcm_format_width(runtime->format) * runtime->rate *
- runtime->channels / 8;
-
- if (bps <= 0)
- return -EINVAL;
-
- dpcm->pcm_bps = bps;
- dpcm->pcm_hz = HZ;
- dpcm->pcm_buffer_size = snd_pcm_lib_buffer_bytes(substream);
- dpcm->pcm_period_size = snd_pcm_lib_period_bytes(substream);
- dpcm->pcm_irq_pos = 0;
- dpcm->pcm_buf_pos = 0;
+ struct dummy_systimer_pcm *dpcm = runtime->private_data;
- snd_pcm_format_set_silence(runtime->format, runtime->dma_area,
- bytes_to_samples(runtime, runtime->dma_bytes));
+ dpcm->frac_pos = 0;
+ dpcm->rate = runtime->rate;
+ dpcm->frac_buffer_size = runtime->buffer_size * HZ;
+ dpcm->frac_period_size = runtime->period_size * HZ;
+ dpcm->frac_period_rest = dpcm->frac_period_size;
+ dpcm->elapsed = 0;
return 0;
}
-static void snd_card_dummy_pcm_timer_function(unsigned long data)
+static void dummy_systimer_callback(unsigned long data)
{
- struct snd_dummy_pcm *dpcm = (struct snd_dummy_pcm *)data;
+ struct dummy_systimer_pcm *dpcm = (struct dummy_systimer_pcm *)data;
unsigned long flags;
+ int elapsed = 0;
spin_lock_irqsave(&dpcm->lock, flags);
- dpcm->timer.expires = 1 + jiffies;
- add_timer(&dpcm->timer);
- dpcm->pcm_irq_pos += dpcm->pcm_bps;
- dpcm->pcm_buf_pos += dpcm->pcm_bps;
- dpcm->pcm_buf_pos %= dpcm->pcm_buffer_size * dpcm->pcm_hz;
- if (dpcm->pcm_irq_pos >= dpcm->pcm_period_size * dpcm->pcm_hz) {
- dpcm->pcm_irq_pos %= dpcm->pcm_period_size * dpcm->pcm_hz;
- spin_unlock_irqrestore(&dpcm->lock, flags);
+ dummy_systimer_update(dpcm);
+ dummy_systimer_rearm(dpcm);
+ elapsed = dpcm->elapsed;
+ dpcm->elapsed = 0;
+ spin_unlock_irqrestore(&dpcm->lock, flags);
+ if (elapsed)
+ snd_pcm_period_elapsed(dpcm->substream);
+}
+
+static snd_pcm_uframes_t
+dummy_systimer_pointer(struct snd_pcm_substream *substream)
+{
+ struct dummy_systimer_pcm *dpcm = substream->runtime->private_data;
+ snd_pcm_uframes_t pos;
+
+ spin_lock(&dpcm->lock);
+ dummy_systimer_update(dpcm);
+ pos = dpcm->frac_pos / HZ;
+ spin_unlock(&dpcm->lock);
+ return pos;
+}
+
+static int dummy_systimer_create(struct snd_pcm_substream *substream)
+{
+ struct dummy_systimer_pcm *dpcm;
+
+ dpcm = kzalloc(sizeof(*dpcm), GFP_KERNEL);
+ if (!dpcm)
+ return -ENOMEM;
+ substream->runtime->private_data = dpcm;
+ init_timer(&dpcm->timer);
+ dpcm->timer.data = (unsigned long) dpcm;
+ dpcm->timer.function = dummy_systimer_callback;
+ spin_lock_init(&dpcm->lock);
+ dpcm->substream = substream;
+ return 0;
+}
+
+static void dummy_systimer_free(struct snd_pcm_substream *substream)
+{
+ kfree(substream->runtime->private_data);
+}
+
+static struct dummy_timer_ops dummy_systimer_ops = {
+ .create = dummy_systimer_create,
+ .free = dummy_systimer_free,
+ .prepare = dummy_systimer_prepare,
+ .start = dummy_systimer_start,
+ .stop = dummy_systimer_stop,
+ .pointer = dummy_systimer_pointer,
+};
+
+#ifdef CONFIG_HIGH_RES_TIMERS
+/*
+ * hrtimer interface
+ */
+
+struct dummy_hrtimer_pcm {
+ ktime_t base_time;
+ ktime_t period_time;
+ atomic_t running;
+ struct hrtimer timer;
+ struct tasklet_struct tasklet;
+ struct snd_pcm_substream *substream;
+};
+
+static void dummy_hrtimer_pcm_elapsed(unsigned long priv)
+{
+ struct dummy_hrtimer_pcm *dpcm = (struct dummy_hrtimer_pcm *)priv;
+ if (atomic_read(&dpcm->running))
snd_pcm_period_elapsed(dpcm->substream);
- } else
- spin_unlock_irqrestore(&dpcm->lock, flags);
}
-static snd_pcm_uframes_t snd_card_dummy_pcm_pointer(struct snd_pcm_substream *substream)
+static enum hrtimer_restart dummy_hrtimer_callback(struct hrtimer *timer)
+{
+ struct dummy_hrtimer_pcm *dpcm;
+
+ dpcm = container_of(timer, struct dummy_hrtimer_pcm, timer);
+ if (!atomic_read(&dpcm->running))
+ return HRTIMER_NORESTART;
+ tasklet_schedule(&dpcm->tasklet);
+ hrtimer_forward_now(timer, dpcm->period_time);
+ return HRTIMER_RESTART;
+}
+
+static int dummy_hrtimer_start(struct snd_pcm_substream *substream)
+{
+ struct dummy_hrtimer_pcm *dpcm = substream->runtime->private_data;
+
+ dpcm->base_time = hrtimer_cb_get_time(&dpcm->timer);
+ hrtimer_start(&dpcm->timer, dpcm->period_time, HRTIMER_MODE_REL);
+ atomic_set(&dpcm->running, 1);
+ return 0;
+}
+
+static int dummy_hrtimer_stop(struct snd_pcm_substream *substream)
+{
+ struct dummy_hrtimer_pcm *dpcm = substream->runtime->private_data;
+
+ atomic_set(&dpcm->running, 0);
+ hrtimer_cancel(&dpcm->timer);
+ return 0;
+}
+
+static inline void dummy_hrtimer_sync(struct dummy_hrtimer_pcm *dpcm)
+{
+ tasklet_kill(&dpcm->tasklet);
+}
+
+static snd_pcm_uframes_t
+dummy_hrtimer_pointer(struct snd_pcm_substream *substream)
{
struct snd_pcm_runtime *runtime = substream->runtime;
- struct snd_dummy_pcm *dpcm = runtime->private_data;
+ struct dummy_hrtimer_pcm *dpcm = runtime->private_data;
+ u64 delta;
+ u32 pos;
+
+ delta = ktime_us_delta(hrtimer_cb_get_time(&dpcm->timer),
+ dpcm->base_time);
+ delta = div_u64(delta * runtime->rate + 999999, 1000000);
+ div_u64_rem(delta, runtime->buffer_size, &pos);
+ return pos;
+}
- return bytes_to_frames(runtime, dpcm->pcm_buf_pos / dpcm->pcm_hz);
+static int dummy_hrtimer_prepare(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct dummy_hrtimer_pcm *dpcm = runtime->private_data;
+ unsigned int period, rate;
+ long sec;
+ unsigned long nsecs;
+
+ dummy_hrtimer_sync(dpcm);
+ period = runtime->period_size;
+ rate = runtime->rate;
+ sec = period / rate;
+ period %= rate;
+ nsecs = div_u64((u64)period * 1000000000UL + rate - 1, rate);
+ dpcm->period_time = ktime_set(sec, nsecs);
+
+ return 0;
}
-static struct snd_pcm_hardware snd_card_dummy_playback =
+static int dummy_hrtimer_create(struct snd_pcm_substream *substream)
{
- .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_RESUME | SNDRV_PCM_INFO_MMAP_VALID),
- .formats = USE_FORMATS,
- .rates = USE_RATE,
- .rate_min = USE_RATE_MIN,
- .rate_max = USE_RATE_MAX,
- .channels_min = USE_CHANNELS_MIN,
- .channels_max = USE_CHANNELS_MAX,
- .buffer_bytes_max = MAX_BUFFER_SIZE,
- .period_bytes_min = 64,
- .period_bytes_max = MAX_PERIOD_SIZE,
- .periods_min = USE_PERIODS_MIN,
- .periods_max = USE_PERIODS_MAX,
- .fifo_size = 0,
+ struct dummy_hrtimer_pcm *dpcm;
+
+ dpcm = kzalloc(sizeof(*dpcm), GFP_KERNEL);
+ if (!dpcm)
+ return -ENOMEM;
+ substream->runtime->private_data = dpcm;
+ hrtimer_init(&dpcm->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+ dpcm->timer.function = dummy_hrtimer_callback;
+ dpcm->substream = substream;
+ atomic_set(&dpcm->running, 0);
+ tasklet_init(&dpcm->tasklet, dummy_hrtimer_pcm_elapsed,
+ (unsigned long)dpcm);
+ return 0;
+}
+
+static void dummy_hrtimer_free(struct snd_pcm_substream *substream)
+{
+ struct dummy_hrtimer_pcm *dpcm = substream->runtime->private_data;
+ dummy_hrtimer_sync(dpcm);
+ kfree(dpcm);
+}
+
+static struct dummy_timer_ops dummy_hrtimer_ops = {
+ .create = dummy_hrtimer_create,
+ .free = dummy_hrtimer_free,
+ .prepare = dummy_hrtimer_prepare,
+ .start = dummy_hrtimer_start,
+ .stop = dummy_hrtimer_stop,
+ .pointer = dummy_hrtimer_pointer,
};
-static struct snd_pcm_hardware snd_card_dummy_capture =
+#endif /* CONFIG_HIGH_RES_TIMERS */
+
+/*
+ * PCM interface
+ */
+
+static int dummy_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
{
- .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_RESUME | SNDRV_PCM_INFO_MMAP_VALID),
+ struct snd_dummy *dummy = snd_pcm_substream_chip(substream);
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_RESUME:
+ return dummy->timer_ops->start(substream);
+ case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ return dummy->timer_ops->stop(substream);
+ }
+ return -EINVAL;
+}
+
+static int dummy_pcm_prepare(struct snd_pcm_substream *substream)
+{
+ struct snd_dummy *dummy = snd_pcm_substream_chip(substream);
+
+ return dummy->timer_ops->prepare(substream);
+}
+
+static snd_pcm_uframes_t dummy_pcm_pointer(struct snd_pcm_substream *substream)
+{
+ struct snd_dummy *dummy = snd_pcm_substream_chip(substream);
+
+ return dummy->timer_ops->pointer(substream);
+}
+
+static struct snd_pcm_hardware dummy_pcm_hardware = {
+ .info = (SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_RESUME |
+ SNDRV_PCM_INFO_MMAP_VALID),
.formats = USE_FORMATS,
.rates = USE_RATE,
.rate_min = USE_RATE_MIN,
.fifo_size = 0,
};
-static void snd_card_dummy_runtime_free(struct snd_pcm_runtime *runtime)
-{
- kfree(runtime->private_data);
-}
-
-static int snd_card_dummy_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *hw_params)
+static int dummy_pcm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *hw_params)
{
- return snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(hw_params));
+ if (fake_buffer) {
+ /* runtime->dma_bytes has to be set manually to allow mmap */
+ substream->runtime->dma_bytes = params_buffer_bytes(hw_params);
+ return 0;
+ }
+ return snd_pcm_lib_malloc_pages(substream,
+ params_buffer_bytes(hw_params));
}
-static int snd_card_dummy_hw_free(struct snd_pcm_substream *substream)
+static int dummy_pcm_hw_free(struct snd_pcm_substream *substream)
{
+ if (fake_buffer)
+ return 0;
return snd_pcm_lib_free_pages(substream);
}
-static struct snd_dummy_pcm *new_pcm_stream(struct snd_pcm_substream *substream)
-{
- struct snd_dummy_pcm *dpcm;
-
- dpcm = kzalloc(sizeof(*dpcm), GFP_KERNEL);
- if (! dpcm)
- return dpcm;
- init_timer(&dpcm->timer);
- dpcm->timer.data = (unsigned long) dpcm;
- dpcm->timer.function = snd_card_dummy_pcm_timer_function;
- spin_lock_init(&dpcm->lock);
- dpcm->substream = substream;
- return dpcm;
-}
-
-static int snd_card_dummy_playback_open(struct snd_pcm_substream *substream)
+static int dummy_pcm_open(struct snd_pcm_substream *substream)
{
+ struct snd_dummy *dummy = snd_pcm_substream_chip(substream);
struct snd_pcm_runtime *runtime = substream->runtime;
- struct snd_dummy_pcm *dpcm;
int err;
- if ((dpcm = new_pcm_stream(substream)) == NULL)
- return -ENOMEM;
- runtime->private_data = dpcm;
- /* makes the infrastructure responsible for freeing dpcm */
- runtime->private_free = snd_card_dummy_runtime_free;
- runtime->hw = snd_card_dummy_playback;
+ dummy->timer_ops = &dummy_systimer_ops;
+#ifdef CONFIG_HIGH_RES_TIMERS
+ if (hrtimer)
+ dummy->timer_ops = &dummy_hrtimer_ops;
+#endif
+
+ err = dummy->timer_ops->create(substream);
+ if (err < 0)
+ return err;
+
+ runtime->hw = dummy_pcm_hardware;
if (substream->pcm->device & 1) {
runtime->hw.info &= ~SNDRV_PCM_INFO_INTERLEAVED;
runtime->hw.info |= SNDRV_PCM_INFO_NONINTERLEAVED;
}
if (substream->pcm->device & 2)
- runtime->hw.info &= ~(SNDRV_PCM_INFO_MMAP|SNDRV_PCM_INFO_MMAP_VALID);
- err = add_playback_constraints(runtime);
- if (err < 0)
+ runtime->hw.info &= ~(SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_MMAP_VALID);
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ err = add_playback_constraints(substream->runtime);
+ else
+ err = add_capture_constraints(substream->runtime);
+ if (err < 0) {
+ dummy->timer_ops->free(substream);
return err;
-
+ }
return 0;
}
-static int snd_card_dummy_capture_open(struct snd_pcm_substream *substream)
+static int dummy_pcm_close(struct snd_pcm_substream *substream)
{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct snd_dummy_pcm *dpcm;
- int err;
+ struct snd_dummy *dummy = snd_pcm_substream_chip(substream);
+ dummy->timer_ops->free(substream);
+ return 0;
+}
- if ((dpcm = new_pcm_stream(substream)) == NULL)
- return -ENOMEM;
- runtime->private_data = dpcm;
- /* makes the infrastructure responsible for freeing dpcm */
- runtime->private_free = snd_card_dummy_runtime_free;
- runtime->hw = snd_card_dummy_capture;
- if (substream->pcm->device == 1) {
- runtime->hw.info &= ~SNDRV_PCM_INFO_INTERLEAVED;
- runtime->hw.info |= SNDRV_PCM_INFO_NONINTERLEAVED;
+/*
+ * dummy buffer handling
+ */
+
+static void *dummy_page[2];
+
+static void free_fake_buffer(void)
+{
+ if (fake_buffer) {
+ int i;
+ for (i = 0; i < 2; i++)
+ if (dummy_page[i]) {
+ free_page((unsigned long)dummy_page[i]);
+ dummy_page[i] = NULL;
+ }
}
- if (substream->pcm->device & 2)
- runtime->hw.info &= ~(SNDRV_PCM_INFO_MMAP|SNDRV_PCM_INFO_MMAP_VALID);
- err = add_capture_constraints(runtime);
- if (err < 0)
- return err;
+}
+static int alloc_fake_buffer(void)
+{
+ int i;
+
+ if (!fake_buffer)
+ return 0;
+ for (i = 0; i < 2; i++) {
+ dummy_page[i] = (void *)get_zeroed_page(GFP_KERNEL);
+ if (!dummy_page[i]) {
+ free_fake_buffer();
+ return -ENOMEM;
+ }
+ }
return 0;
}
-static int snd_card_dummy_playback_close(struct snd_pcm_substream *substream)
+static int dummy_pcm_copy(struct snd_pcm_substream *substream,
+ int channel, snd_pcm_uframes_t pos,
+ void __user *dst, snd_pcm_uframes_t count)
{
- return 0;
+ return 0; /* do nothing */
}
-static int snd_card_dummy_capture_close(struct snd_pcm_substream *substream)
+static int dummy_pcm_silence(struct snd_pcm_substream *substream,
+ int channel, snd_pcm_uframes_t pos,
+ snd_pcm_uframes_t count)
{
- return 0;
+ return 0; /* do nothing */
+}
+
+static struct page *dummy_pcm_page(struct snd_pcm_substream *substream,
+ unsigned long offset)
+{
+ return virt_to_page(dummy_page[substream->stream]); /* the same page */
}
-static struct snd_pcm_ops snd_card_dummy_playback_ops = {
- .open = snd_card_dummy_playback_open,
- .close = snd_card_dummy_playback_close,
- .ioctl = snd_pcm_lib_ioctl,
- .hw_params = snd_card_dummy_hw_params,
- .hw_free = snd_card_dummy_hw_free,
- .prepare = snd_card_dummy_pcm_prepare,
- .trigger = snd_card_dummy_pcm_trigger,
- .pointer = snd_card_dummy_pcm_pointer,
+static struct snd_pcm_ops dummy_pcm_ops = {
+ .open = dummy_pcm_open,
+ .close = dummy_pcm_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = dummy_pcm_hw_params,
+ .hw_free = dummy_pcm_hw_free,
+ .prepare = dummy_pcm_prepare,
+ .trigger = dummy_pcm_trigger,
+ .pointer = dummy_pcm_pointer,
};
-static struct snd_pcm_ops snd_card_dummy_capture_ops = {
- .open = snd_card_dummy_capture_open,
- .close = snd_card_dummy_capture_close,
- .ioctl = snd_pcm_lib_ioctl,
- .hw_params = snd_card_dummy_hw_params,
- .hw_free = snd_card_dummy_hw_free,
- .prepare = snd_card_dummy_pcm_prepare,
- .trigger = snd_card_dummy_pcm_trigger,
- .pointer = snd_card_dummy_pcm_pointer,
+static struct snd_pcm_ops dummy_pcm_ops_no_buf = {
+ .open = dummy_pcm_open,
+ .close = dummy_pcm_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = dummy_pcm_hw_params,
+ .hw_free = dummy_pcm_hw_free,
+ .prepare = dummy_pcm_prepare,
+ .trigger = dummy_pcm_trigger,
+ .pointer = dummy_pcm_pointer,
+ .copy = dummy_pcm_copy,
+ .silence = dummy_pcm_silence,
+ .page = dummy_pcm_page,
};
static int __devinit snd_card_dummy_pcm(struct snd_dummy *dummy, int device,
int substreams)
{
struct snd_pcm *pcm;
+ struct snd_pcm_ops *ops;
int err;
err = snd_pcm_new(dummy->card, "Dummy PCM", device,
if (err < 0)
return err;
dummy->pcm = pcm;
- snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_card_dummy_playback_ops);
- snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_card_dummy_capture_ops);
+ if (fake_buffer)
+ ops = &dummy_pcm_ops_no_buf;
+ else
+ ops = &dummy_pcm_ops;
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, ops);
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, ops);
pcm->private_data = dummy;
pcm->info_flags = 0;
strcpy(pcm->name, "Dummy PCM");
- snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS,
- snd_dma_continuous_data(GFP_KERNEL),
- 0, 64*1024);
+ if (!fake_buffer) {
+ snd_pcm_lib_preallocate_pages_for_all(pcm,
+ SNDRV_DMA_TYPE_CONTINUOUS,
+ snd_dma_continuous_data(GFP_KERNEL),
+ 0, 64*1024);
+ }
return 0;
}
+/*
+ * mixer interface
+ */
+
#define DUMMY_VOLUME(xname, xindex, addr) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
.access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_TLV_READ, \
return 0;
}
+#if defined(CONFIG_SND_DEBUG) && defined(CONFIG_PROC_FS)
+/*
+ * proc interface
+ */
+static void print_formats(struct snd_info_buffer *buffer)
+{
+ int i;
+
+ for (i = 0; i < SNDRV_PCM_FORMAT_LAST; i++) {
+ if (dummy_pcm_hardware.formats & (1ULL << i))
+ snd_iprintf(buffer, " %s", snd_pcm_format_name(i));
+ }
+}
+
+static void print_rates(struct snd_info_buffer *buffer)
+{
+ static int rates[] = {
+ 5512, 8000, 11025, 16000, 22050, 32000, 44100, 48000,
+ 64000, 88200, 96000, 176400, 192000,
+ };
+ int i;
+
+ if (dummy_pcm_hardware.rates & SNDRV_PCM_RATE_CONTINUOUS)
+ snd_iprintf(buffer, " continuous");
+ if (dummy_pcm_hardware.rates & SNDRV_PCM_RATE_KNOT)
+ snd_iprintf(buffer, " knot");
+ for (i = 0; i < ARRAY_SIZE(rates); i++)
+ if (dummy_pcm_hardware.rates & (1 << i))
+ snd_iprintf(buffer, " %d", rates[i]);
+}
+
+#define get_dummy_int_ptr(ofs) \
+ (unsigned int *)((char *)&dummy_pcm_hardware + (ofs))
+#define get_dummy_ll_ptr(ofs) \
+ (unsigned long long *)((char *)&dummy_pcm_hardware + (ofs))
+
+struct dummy_hw_field {
+ const char *name;
+ const char *format;
+ unsigned int offset;
+ unsigned int size;
+};
+#define FIELD_ENTRY(item, fmt) { \
+ .name = #item, \
+ .format = fmt, \
+ .offset = offsetof(struct snd_pcm_hardware, item), \
+ .size = sizeof(dummy_pcm_hardware.item) }
+
+static struct dummy_hw_field fields[] = {
+ FIELD_ENTRY(formats, "%#llx"),
+ FIELD_ENTRY(rates, "%#x"),
+ FIELD_ENTRY(rate_min, "%d"),
+ FIELD_ENTRY(rate_max, "%d"),
+ FIELD_ENTRY(channels_min, "%d"),
+ FIELD_ENTRY(channels_max, "%d"),
+ FIELD_ENTRY(buffer_bytes_max, "%ld"),
+ FIELD_ENTRY(period_bytes_min, "%ld"),
+ FIELD_ENTRY(period_bytes_max, "%ld"),
+ FIELD_ENTRY(periods_min, "%d"),
+ FIELD_ENTRY(periods_max, "%d"),
+};
+
+static void dummy_proc_read(struct snd_info_entry *entry,
+ struct snd_info_buffer *buffer)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(fields); i++) {
+ snd_iprintf(buffer, "%s ", fields[i].name);
+ if (fields[i].size == sizeof(int))
+ snd_iprintf(buffer, fields[i].format,
+ *get_dummy_int_ptr(fields[i].offset));
+ else
+ snd_iprintf(buffer, fields[i].format,
+ *get_dummy_ll_ptr(fields[i].offset));
+ if (!strcmp(fields[i].name, "formats"))
+ print_formats(buffer);
+ else if (!strcmp(fields[i].name, "rates"))
+ print_rates(buffer);
+ snd_iprintf(buffer, "\n");
+ }
+}
+
+static void dummy_proc_write(struct snd_info_entry *entry,
+ struct snd_info_buffer *buffer)
+{
+ char line[64];
+
+ while (!snd_info_get_line(buffer, line, sizeof(line))) {
+ char item[20];
+ const char *ptr;
+ unsigned long long val;
+ int i;
+
+ ptr = snd_info_get_str(item, line, sizeof(item));
+ for (i = 0; i < ARRAY_SIZE(fields); i++) {
+ if (!strcmp(item, fields[i].name))
+ break;
+ }
+ if (i >= ARRAY_SIZE(fields))
+ continue;
+ snd_info_get_str(item, ptr, sizeof(item));
+ if (strict_strtoull(item, 0, &val))
+ continue;
+ if (fields[i].size == sizeof(int))
+ *get_dummy_int_ptr(fields[i].offset) = val;
+ else
+ *get_dummy_ll_ptr(fields[i].offset) = val;
+ }
+}
+
+static void __devinit dummy_proc_init(struct snd_dummy *chip)
+{
+ struct snd_info_entry *entry;
+
+ if (!snd_card_proc_new(chip->card, "dummy_pcm", &entry)) {
+ snd_info_set_text_ops(entry, chip, dummy_proc_read);
+ entry->c.text.write = dummy_proc_write;
+ entry->mode |= S_IWUSR;
+ }
+}
+#else
+#define dummy_proc_init(x)
+#endif /* CONFIG_SND_DEBUG && CONFIG_PROC_FS */
+
static int __devinit snd_dummy_probe(struct platform_device *devptr)
{
struct snd_card *card;
strcpy(card->shortname, "Dummy");
sprintf(card->longname, "Dummy %i", dev + 1);
+ dummy_proc_init(dummy);
+
snd_card_set_dev(card, &devptr->dev);
err = snd_card_register(card);
for (i = 0; i < ARRAY_SIZE(devices); ++i)
platform_device_unregister(devices[i]);
platform_driver_unregister(&snd_dummy_driver);
+ free_fake_buffer();
}
static int __init alsa_card_dummy_init(void)
if (err < 0)
return err;
+ err = alloc_fake_buffer();
+ if (err < 0) {
+ platform_driver_unregister(&snd_dummy_driver);
+ return err;
+ }
+
cards = 0;
for (i = 0; i < SNDRV_CARDS; i++) {
struct platform_device *device;
/*
- * Driver for C-Media's CMI8330 soundcards.
+ * Driver for C-Media's CMI8330 and CMI8329 soundcards.
* Copyright (c) by George Talusan <gstalusan@uwaterloo.ca>
* http://www.undergrad.math.uwaterloo.ca/~gstalusa
*
*
* This card has two mixers and two PCM devices. I've cheesed it such
* that recording and playback can be done through the same device.
- * The driver "magically" routes the capturing to the CMI8330 codec,
+ * The driver "magically" routes the capturing to the AD1848 codec,
* and playback to the SB16 codec. This allows for full-duplex mode
* to some extent.
* The utilities in alsa-utils are aware of both devices, so passing
/*
*/
MODULE_AUTHOR("George Talusan <gstalusan@uwaterloo.ca>");
-MODULE_DESCRIPTION("C-Media CMI8330");
+MODULE_DESCRIPTION("C-Media CMI8330/CMI8329");
MODULE_LICENSE("GPL");
MODULE_SUPPORTED_DEVICE("{{C-Media,CMI8330,isapnp:{CMI0001,@@@0001,@X@0001}}}");
static int mpuirq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ;
module_param_array(index, int, NULL, 0444);
-MODULE_PARM_DESC(index, "Index value for CMI8330 soundcard.");
+MODULE_PARM_DESC(index, "Index value for CMI8330/CMI8329 soundcard.");
module_param_array(id, charp, NULL, 0444);
-MODULE_PARM_DESC(id, "ID string for CMI8330 soundcard.");
+MODULE_PARM_DESC(id, "ID string for CMI8330/CMI8329 soundcard.");
module_param_array(enable, bool, NULL, 0444);
-MODULE_PARM_DESC(enable, "Enable CMI8330 soundcard.");
+MODULE_PARM_DESC(enable, "Enable CMI8330/CMI8329 soundcard.");
#ifdef CONFIG_PNP
module_param_array(isapnp, bool, NULL, 0444);
MODULE_PARM_DESC(isapnp, "PnP detection for specified soundcard.");
#endif
module_param_array(sbport, long, NULL, 0444);
-MODULE_PARM_DESC(sbport, "Port # for CMI8330 SB driver.");
+MODULE_PARM_DESC(sbport, "Port # for CMI8330/CMI8329 SB driver.");
module_param_array(sbirq, int, NULL, 0444);
-MODULE_PARM_DESC(sbirq, "IRQ # for CMI8330 SB driver.");
+MODULE_PARM_DESC(sbirq, "IRQ # for CMI8330/CMI8329 SB driver.");
module_param_array(sbdma8, int, NULL, 0444);
-MODULE_PARM_DESC(sbdma8, "DMA8 for CMI8330 SB driver.");
+MODULE_PARM_DESC(sbdma8, "DMA8 for CMI8330/CMI8329 SB driver.");
module_param_array(sbdma16, int, NULL, 0444);
-MODULE_PARM_DESC(sbdma16, "DMA16 for CMI8330 SB driver.");
+MODULE_PARM_DESC(sbdma16, "DMA16 for CMI8330/CMI8329 SB driver.");
module_param_array(wssport, long, NULL, 0444);
-MODULE_PARM_DESC(wssport, "Port # for CMI8330 WSS driver.");
+MODULE_PARM_DESC(wssport, "Port # for CMI8330/CMI8329 WSS driver.");
module_param_array(wssirq, int, NULL, 0444);
-MODULE_PARM_DESC(wssirq, "IRQ # for CMI8330 WSS driver.");
+MODULE_PARM_DESC(wssirq, "IRQ # for CMI8330/CMI8329 WSS driver.");
module_param_array(wssdma, int, NULL, 0444);
-MODULE_PARM_DESC(wssdma, "DMA for CMI8330 WSS driver.");
+MODULE_PARM_DESC(wssdma, "DMA for CMI8330/CMI8329 WSS driver.");
module_param_array(fmport, long, NULL, 0444);
-MODULE_PARM_DESC(fmport, "FM port # for CMI8330 driver.");
+MODULE_PARM_DESC(fmport, "FM port # for CMI8330/CMI8329 driver.");
module_param_array(mpuport, long, NULL, 0444);
-MODULE_PARM_DESC(mpuport, "MPU-401 port # for CMI8330 driver.");
+MODULE_PARM_DESC(mpuport, "MPU-401 port # for CMI8330/CMI8329 driver.");
module_param_array(mpuirq, int, NULL, 0444);
-MODULE_PARM_DESC(mpuirq, "IRQ # for CMI8330 MPU-401 port.");
+MODULE_PARM_DESC(mpuirq, "IRQ # for CMI8330/CMI8329 MPU-401 port.");
#ifdef CONFIG_PNP
static int isa_registered;
static int pnp_registered;
typedef int (*snd_pcm_open_callback_t)(struct snd_pcm_substream *);
+enum card_type {
+ CMI8330,
+ CMI8329
+};
+
struct snd_cmi8330 {
#ifdef CONFIG_PNP
struct pnp_dev *cap;
snd_pcm_open_callback_t open;
void *private_data; /* sb or wss */
} streams[2];
+
+ enum card_type type;
};
#ifdef CONFIG_PNP
static struct pnp_card_device_id snd_cmi8330_pnpids[] = {
+ { .id = "CMI0001", .devs = { { "@X@0001" }, { "@@@0001" }, { "@H@0001" }, { "A@@0001" } } },
{ .id = "CMI0001", .devs = { { "@@@0001" }, { "@X@0001" }, { "@H@0001" } } },
{ .id = "" }
};
unsigned int idx;
int err;
- strcpy(card->mixername, "CMI8330/C3D");
+ strcpy(card->mixername, (acard->type == CMI8329) ? "CMI8329" : "CMI8330/C3D");
for (idx = 0; idx < ARRAY_SIZE(snd_cmi8330_controls); idx++) {
err = snd_ctl_add(card,
struct pnp_dev *pdev;
int err;
+ /* CMI8329 has a device with ID A@@0001, CMI8330 does not */
+ acard->type = (id->devs[3].id[0]) ? CMI8329 : CMI8330;
+
acard->cap = pnp_request_card_device(card, id->devs[0].id, NULL);
if (acard->cap == NULL)
return -EBUSY;
err = pnp_activate_dev(pdev);
if (err < 0) {
- snd_printk(KERN_ERR "CMI8330/C3D PnP configure failure\n");
+ snd_printk(KERN_ERR "AD1848 PnP configure failure\n");
return -EBUSY;
}
wssport[dev] = pnp_port_start(pdev, 0);
wssdma[dev] = pnp_dma(pdev, 0);
wssirq[dev] = pnp_irq(pdev, 0);
- fmport[dev] = pnp_port_start(pdev, 1);
+ if (pnp_port_start(pdev, 1))
+ fmport[dev] = pnp_port_start(pdev, 1);
/* allocate SB16 resources */
pdev = acard->play;
err = pnp_activate_dev(pdev);
if (err < 0) {
- snd_printk(KERN_ERR "CMI8330/C3D (SB16) PnP configure failure\n");
+ snd_printk(KERN_ERR "SB16 PnP configure failure\n");
return -EBUSY;
}
sbport[dev] = pnp_port_start(pdev, 0);
sbdma8[dev] = pnp_dma(pdev, 0);
sbdma16[dev] = pnp_dma(pdev, 1);
sbirq[dev] = pnp_irq(pdev, 0);
+ /* On CMI8239, the OPL3 port might be present in SB16 PnP resources */
+ if (fmport[dev] == SNDRV_AUTO_PORT) {
+ if (pnp_port_start(pdev, 1))
+ fmport[dev] = pnp_port_start(pdev, 1);
+ else
+ fmport[dev] = 0x388; /* Or hardwired */
+ }
/* allocate MPU-401 resources */
pdev = acard->mpu;
err = pnp_activate_dev(pdev);
- if (err < 0) {
- snd_printk(KERN_ERR
- "CMI8330/C3D (MPU-401) PnP configure failure\n");
- return -EBUSY;
+ if (err < 0)
+ snd_printk(KERN_ERR "MPU-401 PnP configure failure: will be disabled\n");
+ else {
+ mpuport[dev] = pnp_port_start(pdev, 0);
+ mpuirq[dev] = pnp_irq(pdev, 0);
}
- mpuport[dev] = pnp_port_start(pdev, 0);
- mpuirq[dev] = pnp_irq(pdev, 0);
return 0;
}
#endif
snd_cmi8330_capture_open
};
- if ((err = snd_pcm_new(card, "CMI8330", 0, 1, 1, &pcm)) < 0)
+ if ((err = snd_pcm_new(card, (chip->type == CMI8329) ? "CMI8329" : "CMI8330", 0, 1, 1, &pcm)) < 0)
return err;
- strcpy(pcm->name, "CMI8330");
+ strcpy(pcm->name, (chip->type == CMI8329) ? "CMI8329" : "CMI8330");
pcm->private_data = chip;
/* SB16 */
wssdma[dev], -1,
WSS_HW_DETECT, 0, &acard->wss);
if (err < 0) {
- snd_printk(KERN_ERR PFX "(CMI8330) device busy??\n");
+ snd_printk(KERN_ERR PFX "AD1848 device busy??\n");
return err;
}
if (acard->wss->hardware != WSS_HW_CMI8330) {
- snd_printk(KERN_ERR PFX "(CMI8330) not found during probe\n");
+ snd_printk(KERN_ERR PFX "AD1848 not found during probe\n");
return -ENODEV;
}
sbdma8[dev],
sbdma16[dev],
SB_HW_AUTO, &acard->sb)) < 0) {
- snd_printk(KERN_ERR PFX "(SB16) device busy??\n");
+ snd_printk(KERN_ERR PFX "SB16 device busy??\n");
return err;
}
if (acard->sb->hardware != SB_HW_16) {
- snd_printk(KERN_ERR PFX "(SB16) not found during probe\n");
+ snd_printk(KERN_ERR PFX "SB16 not found during probe\n");
return err;
}
mpuport[dev]);
}
- strcpy(card->driver, "CMI8330/C3D");
- strcpy(card->shortname, "C-Media CMI8330/C3D");
+ strcpy(card->driver, (acard->type == CMI8329) ? "CMI8329" : "CMI8330/C3D");
+ strcpy(card->shortname, (acard->type == CMI8329) ? "C-Media CMI8329" : "C-Media CMI8330/C3D");
sprintf(card->longname, "%s at 0x%lx, irq %d, dma %d",
card->shortname,
acard->wss->port,
if (!(pcmp->flags & SNDRV_GF1_PCM_PFLG_ACTIVE))
continue;
/* load real volume - better precision */
- spin_lock_irqsave(&gus->reg_lock, flags);
+ spin_lock(&gus->reg_lock);
snd_gf1_select_voice(gus, pvoice->number);
snd_gf1_ctrl_stop(gus, SNDRV_GF1_VB_VOLUME_CONTROL);
vol = pvoice == pcmp->pvoices[0] ? gus->gf1.pcm_volume_level_left : gus->gf1.pcm_volume_level_right;
snd_gf1_write16(gus, SNDRV_GF1_VW_VOLUME, vol);
pcmp->final_volume = 1;
- spin_unlock_irqrestore(&gus->reg_lock, flags);
+ spin_unlock(&gus->reg_lock);
}
spin_unlock_irqrestore(&gus->voice_alloc, flags);
return change;
/*
* Size of character arrays that store name and version of sound card
*/
-#define CARDNAMELEN 15 /* Size of the card's name in chars */
-#define CARDVERLEN 2 /* Size of the card's version in chars */
+#define CARDNAMELEN 15 /* Size of the card's name in chars */
+#define CARDVERLEN 10 /* Size of the card's version in chars */
+#define CARDVERDIGITS 2 /* Number of digits in the version */
#if defined(CONFIG_SC6600)
/*
static int soft_cfg __initdata = 0; /* bitmapped config */
static int soft_cfg_mss __initdata = 0; /* bitmapped mss config */
-static int ver[CARDVERLEN] __initdata = {0, 0}; /* DSP Ver:
+static int ver[CARDVERDIGITS] __initdata = {0, 0}; /* DSP Ver:
hi->ver[0] lo->ver[1] */
#if defined(CONFIG_SC6600)
* string is finished.
*/
ver[len++] = ret;
- } while (len < CARDVERLEN);
+ } while (len < CARDVERDIGITS);
sprintf(DSPVersion, "%d.%d", ver[0], ver[1]);
DBG(("success.\n"));
for (dev = 0; dev < num_midis; dev++)
if (midi_devs[dev] != NULL && midi_out_buf[dev] != NULL)
{
- int ok = 1;
-
- while (DATA_AVAIL(midi_out_buf[dev]) && ok)
+ while (DATA_AVAIL(midi_out_buf[dev]))
{
+ int ok;
int c = midi_out_buf[dev]->queue[midi_out_buf[dev]->head];
spin_unlock_irqrestore(&lock,flags);/* Give some time to others */
ok = midi_devs[dev]->outputc(dev, c);
spin_lock_irqsave(&lock, flags);
+ if (!ok)
+ break;
midi_out_buf[dev]->head = (midi_out_buf[dev]->head + 1) % MAX_QUEUE_SIZE;
midi_out_buf[dev]->len--;
}
sprintf(mpu_synth_info[m].name, "%s (MPU401)", hw_config->name);
else
sprintf(mpu_synth_info[m].name,
- "MPU-401 %d.%d%c Midi interface #%d",
+ "MPU-401 %d.%d%c MIDI #%d",
(int) (devc->version & 0xf0) >> 4,
devc->version & 0x0f,
revision_char,
ASSERT(!(buffer_paddr & 0xFF));
chan->baseval = (buffer_paddr >> 8) | 1 << (37 - 8);
- chan->cfgval = (!LI_CCFG_LOCK |
+ chan->cfgval = ((chan->cfgval & ~LI_CCFG_LOCK) |
SHIFT_FIELD(desc->ad1843_slot, LI_CCFG_SLOT) |
desc->direction |
mode |
tmask = 13 - fragshift; /* See Lithium DMA Notes above. */
ASSERT(size >= 2 && size <= 7);
ASSERT(tmask >= 1 && tmask <= 7);
- chan->ctlval = (!LI_CCTL_RESET |
+ chan->ctlval = ((chan->ctlval & ~LI_CCTL_RESET) |
SHIFT_FIELD(size, LI_CCTL_SIZE) |
- !LI_CCTL_DMA_ENABLE |
+ (chan->ctlval & ~LI_CCTL_DMA_ENABLE) |
SHIFT_FIELD(tmask, LI_CCTL_TMASK) |
SHIFT_FIELD(0, LI_CCTL_TPTR));
config SND_AZT3328
- tristate "Aztech AZF3328 / PCI168 (EXPERIMENTAL)"
- depends on EXPERIMENTAL
+ tristate "Aztech AZF3328 / PCI168"
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_PCM
+ select SND_RAWMIDI
help
Say Y here to include support for Aztech AZF3328 (PCI168)
soundcards.
unsigned int res;
end_time = jiffies + msecs_to_jiffies(250);
- do {
+
+ for (;;) {
res = snd_ali_5451_peek(codec,port);
if (!(res & 0x8000))
return 0;
+ if (!time_after_eq(end_time, jiffies))
+ break;
schedule_timeout_uninterruptible(1);
- } while (time_after_eq(end_time, jiffies));
+ }
+
snd_ali_5451_poke(codec, port, res & ~0x8000);
snd_printdd("ali_codec_ready: codec is not ready.\n ");
return -EIO;
unsigned long dwChk1,dwChk2;
dwChk1 = snd_ali_5451_peek(codec, ALI_STIMER);
- dwChk2 = snd_ali_5451_peek(codec, ALI_STIMER);
-
end_time = jiffies + msecs_to_jiffies(250);
- do {
+
+ for (;;) {
dwChk2 = snd_ali_5451_peek(codec, ALI_STIMER);
if (dwChk2 != dwChk1)
return 0;
+ if (!time_after_eq(end_time, jiffies))
+ break;
schedule_timeout_uninterruptible(1);
- } while (time_after_eq(end_time, jiffies));
+ }
+
snd_printk(KERN_ERR "ali_stimer_read: stimer is not ready.\n");
return -EIO;
}
return 0;
}
-#ifdef CODEC_RESET
-
-static int snd_ali_reset_codec(struct snd_ali *codec)
-{
- struct pci_dev *pci_dev;
- unsigned char bVal;
- unsigned int dwVal;
- unsigned short wCount, wReg;
-
- pci_dev = codec->pci_m1533;
-
- pci_read_config_dword(pci_dev, 0x7c, &dwVal);
- pci_write_config_dword(pci_dev, 0x7c, dwVal | 0x08000000);
- udelay(5000);
- pci_read_config_dword(pci_dev, 0x7c, &dwVal);
- pci_write_config_dword(pci_dev, 0x7c, dwVal & 0xf7ffffff);
- udelay(5000);
-
- bVal = inb(ALI_REG(codec,ALI_SCTRL));
- bVal |= 0x02;
- outb(ALI_REG(codec,ALI_SCTRL),bVal);
- udelay(5000);
- bVal = inb(ALI_REG(codec,ALI_SCTRL));
- bVal &= 0xfd;
- outb(ALI_REG(codec,ALI_SCTRL),bVal);
- udelay(15000);
-
- wCount = 200;
- while (wCount--) {
- wReg = snd_ali_codec_read(codec->ac97, AC97_POWERDOWN);
- if ((wReg & 0x000f) == 0x000f)
- return 0;
- udelay(5000);
- }
- return -1;
-}
-
-#endif
-
/*
* ALI 5451 Controller
*/
outl(gc, ALI_REG(codec, ALI_GC_CIR));
}
-#if 0 /* not used */
-static void snd_ali_enable_voice_irq(struct snd_ali *codec,
- unsigned int channel)
-{
- unsigned int mask;
- struct snd_ali_channel_control *pchregs = &(codec->chregs);
-
- snd_ali_printk("enable_voice_irq channel=%d\n",channel);
-
- mask = 1 << (channel & 0x1f);
- pchregs->data.ainten = inl(ALI_REG(codec, pchregs->regs.ainten));
- pchregs->data.ainten |= mask;
- outl(pchregs->data.ainten, ALI_REG(codec, pchregs->regs.ainten));
-}
-#endif
-
static void snd_ali_disable_voice_irq(struct snd_ali *codec,
unsigned int channel)
{
}
}
-#if 0 /* not used */
-static void snd_ali_start_voice(struct snd_ali *codec, unsigned int channel)
-{
- unsigned int mask = 1 << (channel & 0x1f);
-
- snd_ali_printk("start_voice: channel=%d\n",channel);
- outl(mask, ALI_REG(codec,codec->chregs.regs.start));
-}
-#endif
-
static void snd_ali_stop_voice(struct snd_ali *codec, unsigned int channel)
{
unsigned int mask = 1 << (channel & 0x1f);
/*
* azt3328.c - driver for Aztech AZF3328 based soundcards (e.g. PCI168).
- * Copyright (C) 2002, 2005 - 200
8 by Andreas Mohr <andi AT lisas.de>
+ * Copyright (C) 2002, 2005 - 200
9 by Andreas Mohr <andi AT lisas.de>
*
* Framework borrowed from Bart Hartgers's als4000.c.
* Driver developed on PCI168 AP(W) version (PCI rev. 10, subsystem ID 1801),
* PCI168 A/AP, sub ID 8000
* Please give me feedback in case you try my driver with one of these!!
*
+ * Keywords: Windows XP Vista 168nt4-125.zip 168win95-125.zip PCI 168 download
+ * (XP/Vista do not support this card at all but every Linux distribution
+ * has very good support out of the box;
+ * just to make sure that the right people hit this and get to know that,
+ * despite the high level of Internet ignorance - as usual :-P -
+ * about very good support for this card - on Linux!)
+ *
* GPL LICENSE
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* - built-in General DirectX timer having a 20 bits counter
* with 1us resolution (see below!)
* - I2S serial output port for external DAC
+ * [FIXME: 3.3V or 5V level? maximum rate is 66.2kHz right?]
* - supports 33MHz PCI spec 2.1, PCI power management 1.0, compliant with ACPI
* - supports hardware volume control
* - single chip low cost solution (128 pin QFP)
- * - supports programmable Sub-vendor and Sub-system ID
+ * - supports programmable Sub-vendor and Sub-system ID [24C02 SEEPROM chip]
* required for Microsoft's logo compliance (FIXME: where?)
* At least the Trident 4D Wave DX has one bit somewhere
* to enable writes to PCI subsystem VID registers, that should be it.
* some custom data starting at 0x80. What kind of config settings
* are located in our extended PCI space anyway??
* - PCI168 AP(W) card: power amplifier with 4 Watts/channel at 4 Ohms
+ * [TDA1517P chip]
*
* Note that this driver now is actually *better* than the Windows driver,
* since it additionally supports the card's 1MHz DirectX timer - just try
* to read the Digital Enhanced Game Port. Not sure whether it is fixable.
*
* TODO
+ * - use PCI_VDEVICE
+ * - verify driver status on x86_64
+ * - test multi-card driver operation
+ * - (ab)use 1MHz DirectX timer as kernel clocksource
* - test MPU401 MIDI playback etc.
* - add more power micro-management (disable various units of the card
- * as long as they're unused). However this requires more I/O ports which I
- * haven't figured out yet and which thus might not even exist...
+ * as long as they're unused, to improve audio quality and save power).
+ * However this requires more I/O ports which I haven't figured out yet
+ * and which thus might not even exist...
* The standard suspend/resume functionality could probably make use of
* some improvement, too...
* - figure out what all unknown port bits are responsible for
#define SUPPORT_GAMEPORT 1
#endif
+/* === Debug settings ===
+ Further diagnostic functionality than the settings below
+ does not need to be provided, since one can easily write a bash script
+ to dump the card's I/O ports (those listed in lspci -v -v):
+ function dump()
+ {
+ local descr=$1; local addr=$2; local count=$3
+
+ echo "${descr}: ${count} @ ${addr}:"
+ dd if=/dev/port skip=$[${addr}] count=${count} bs=1 2>/dev/null| hexdump -C
+ }
+ and then use something like
+ "dump joy200 0x200 8", "dump mpu388 0x388 4", "dump joy 0xb400 8",
+ "dump codec00 0xa800 32", "dump mixer 0xb800 64", "dump synth 0xbc00 8",
+ possibly within a "while true; do ... sleep 1; done" loop.
+ Tweaking ports could be done using
+ VALSTRING="`printf "%02x" $value`"
+ printf "\x""$VALSTRING"|dd of=/dev/port seek=$[${addr}] bs=1 2>/dev/null
+*/
+
#define DEBUG_MISC 0
#define DEBUG_CALLS 0
#define DEBUG_MIXER 0
-#define DEBUG_PLAY_REC 0
+#define DEBUG_CODEC 0
#define DEBUG_IO 0
#define DEBUG_TIMER 0
#define DEBUG_GAME 0
+#define DEBUG_PM 0
#define MIXER_TESTING 0
#if DEBUG_MISC
-#define snd_azf3328_dbgmisc(format, args...) printk(KERN_ERR format, ##args)
+#define snd_azf3328_dbgmisc(format, args...) printk(KERN_DEBUG format, ##args)
#else
#define snd_azf3328_dbgmisc(format, args...)
#endif
#if DEBUG_CALLS
#define snd_azf3328_dbgcalls(format, args...) printk(format, ##args)
-#define snd_azf3328_dbgcallenter() printk(KERN_ERR "--> %s\n", __func__)
-#define snd_azf3328_dbgcallleave() printk(KERN_ERR "<-- %s\n", __func__)
+#define snd_azf3328_dbgcallenter() printk(KERN_DEBUG "--> %s\n", __func__)
+#define snd_azf3328_dbgcallleave() printk(KERN_DEBUG "<-- %s\n", __func__)
#else
#define snd_azf3328_dbgcalls(format, args...)
#define snd_azf3328_dbgcallenter()
#define snd_azf3328_dbgmixer(format, args...)
#endif
-#if DEBUG_PLAY_REC
-#define snd_azf3328_dbgplay(format, args...) printk(KERN_DEBUG format, ##args)
+#if DEBUG_CODEC
+#define snd_azf3328_dbgcodec(format, args...) printk(KERN_DEBUG format, ##args)
#else
-#define snd_azf3328_dbgplay(format, args...)
+#define snd_azf3328_dbgcodec(format, args...)
#endif
#if DEBUG_MISC
#define snd_azf3328_dbggame(format, args...)
#endif
+#if DEBUG_PM
+#define snd_azf3328_dbgpm(format, args...) printk(KERN_DEBUG format, ##args)
+#else
+#define snd_azf3328_dbgpm(format, args...)
+#endif
+
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
module_param_array(index, int, NULL, 0444);
MODULE_PARM_DESC(index, "Index value for AZF3328 soundcard.");
module_param(seqtimer_scaling, int, 0444);
MODULE_PARM_DESC(seqtimer_scaling, "Set 1024000Hz sequencer timer scale factor (lockup danger!). Default 128.");
-struct snd_azf3328_audio_stream {
+struct snd_azf3328_codec_data {
+ unsigned long io_base;
struct snd_pcm_substream *substream;
- int enabled;
- int running;
- unsigned long portbase;
+ bool running;
+ const char *name;
};
-enum snd_azf3328_stream_index {
- AZF_PLAYBACK = 0,
- AZF_CAPTURE = 1,
+enum snd_azf3328_codec_type {
+ AZF_CODEC_PLAYBACK = 0,
+ AZF_CODEC_CAPTURE = 1,
+ AZF_CODEC_I2S_OUT = 2,
};
struct snd_azf3328 {
/* often-used fields towards beginning, then grouped */
- unsigned long codec_io; /* usually 0xb000, size 128 */
+ unsigned long ctrl_io; /* usually 0xb000, size 128 */
unsigned long game_io; /* usually 0xb400, size 8 */
unsigned long mpu_io; /* usually 0xb800, size 4 */
unsigned long opl3_io; /* usually 0xbc00, size 8 */
struct snd_timer *timer;
- struct snd_pcm *pcm;
- struct snd_azf3328_audio_stream audio_stream[2];
+ struct snd_pcm *pcm[3];
+
+ /* playback, recording and I2S out codecs */
+ struct snd_azf3328_codec_data codecs[3];
struct snd_card *card;
struct snd_rawmidi *rmidi;
#ifdef SUPPORT_GAMEPORT
struct gameport *gameport;
- int axes[4];
+ u16 axes[4];
#endif
struct pci_dev *pci;
* If we need to add more registers here, then we might try to fold this
* into some transparent combined shadow register handling with
* CONFIG_PM register storage below, but that's slightly difficult. */
- u16 shadow_reg_codec_6AH;
+ u16 shadow_reg_ctrl_6AH;
#ifdef CONFIG_PM
/* register value containers for power management
- * Note: not always full I/O range preserved (just like Win driver!) */
- u16 saved_regs_codec[AZF_IO_SIZE_CODEC_PM / 2];
- u16 saved_regs_game [AZF_IO_SIZE_GAME_PM / 2];
- u16 saved_regs_mpu [AZF_IO_SIZE_MPU_PM / 2];
- u16 saved_regs_opl3 [AZF_IO_SIZE_OPL3_PM / 2];
- u16 saved_regs_mixer[AZF_IO_SIZE_MIXER_PM / 2];
+ * Note: not always full I/O range preserved (similar to Win driver!) */
+ u32 saved_regs_ctrl[AZF_ALIGN(AZF_IO_SIZE_CTRL_PM) / 4];
+ u32 saved_regs_game[AZF_ALIGN(AZF_IO_SIZE_GAME_PM) / 4];
+ u32 saved_regs_mpu[AZF_ALIGN(AZF_IO_SIZE_MPU_PM) / 4];
+ u32 saved_regs_opl3[AZF_ALIGN(AZF_IO_SIZE_OPL3_PM) / 4];
+ u32 saved_regs_mixer[AZF_ALIGN(AZF_IO_SIZE_MIXER_PM) / 4];
#endif
};
static int
-snd_azf3328_io_reg_setb(unsigned reg, u8 mask, int do_set)
+snd_azf3328_io_reg_setb(unsigned reg, u8 mask, bool do_set)
{
u8 prev = inb(reg), new;
}
static inline void
-snd_azf3328_codec_outb(const struct snd_azf3328 *chip, unsigned reg, u8 value)
+snd_azf3328_codec_outb(const struct snd_azf3328_codec_data *codec,
+ unsigned reg,
+ u8 value
+)
{
- outb(value, chip->codec_io + reg);
+ outb(value, codec->io_base + reg);
}
static inline u8
-snd_azf3328_codec_inb(const struct snd_azf3328 *chip, unsigned reg)
+snd_azf3328_codec_inb(const struct snd_azf3328_codec_data *codec, unsigned reg)
{
- return inb(chip->codec_io + reg);
+ return inb(codec->io_base + reg);
}
static inline void
-snd_azf3328_codec_outw(const struct snd_azf3328 *chip, unsigned reg, u16 value)
+snd_azf3328_codec_outw(const struct snd_azf3328_codec_data *codec,
+ unsigned reg,
+ u16 value
+)
{
- outw(value, chip->codec_io + reg);
+ outw(value, codec->io_base + reg);
}
static inline u16
-snd_azf3328_codec_inw(const struct snd_azf3328 *chip, unsigned reg)
+snd_azf3328_codec_inw(const struct snd_azf3328_codec_data *codec, unsigned reg)
{
- return inw(chip->codec_io + reg);
+ return inw(codec->io_base + reg);
}
static inline void
-snd_azf3328_codec_outl(const struct snd_azf3328 *chip, unsigned reg, u32 value)
+snd_azf3328_codec_outl(const struct snd_azf3328_codec_data *codec,
+ unsigned reg,
+ u32 value
+)
{
- outl(value, chip->codec_io + reg);
+ outl(value, codec->io_base + reg);
}
static inline u32
-snd_azf3328_codec_inl(const struct snd_azf3328 *chip, unsigned reg)
+snd_azf3328_codec_inl(const struct snd_azf3328_codec_data *codec, unsigned reg)
+{
+ return inl(codec->io_base + reg);
+}
+
+static inline void
+snd_azf3328_ctrl_outb(const struct snd_azf3328 *chip, unsigned reg, u8 value)
+{
+ outb(value, chip->ctrl_io + reg);
+}
+
+static inline u8
+snd_azf3328_ctrl_inb(const struct snd_azf3328 *chip, unsigned reg)
+{
+ return inb(chip->ctrl_io + reg);
+}
+
+static inline void
+snd_azf3328_ctrl_outw(const struct snd_azf3328 *chip, unsigned reg, u16 value)
+{
+ outw(value, chip->ctrl_io + reg);
+}
+
+static inline void
+snd_azf3328_ctrl_outl(const struct snd_azf3328 *chip, unsigned reg, u32 value)
{
- return inl(chip->codec_io + reg);
+ outl(value, chip->ctrl_io + reg);
}
static inline void
#define AZF_MUTE_BIT 0x80
-static int
+static bool
snd_azf3328_mixer_set_mute(const struct snd_azf3328 *chip,
- unsigned reg, int do_mute
+ unsigned reg, bool do_mute
)
{
unsigned long portbase = chip->mixer_io + reg + 1;
- int updated;
+ bool updated;
/* the mute bit is on the *second* (i.e. right) register of a
* left/right channel setting */
{
struct snd_azf3328 *chip = snd_kcontrol_chip(kcontrol);
struct azf3328_mixer_reg reg;
- unsigned int oreg, val;
+ u16 oreg, val;
snd_azf3328_dbgcallenter();
snd_azf3328_mixer_reg_decode(®, kcontrol->private_value);
{
struct snd_azf3328 *chip = snd_kcontrol_chip(kcontrol);
struct azf3328_mixer_reg reg;
- unsigned int oreg, nreg, val;
+ u16 oreg, nreg, val;
snd_azf3328_dbgcallenter();
snd_azf3328_mixer_reg_decode(®, kcontrol->private_value);
{
struct snd_azf3328 *chip = snd_kcontrol_chip(kcontrol);
struct azf3328_mixer_reg reg;
- unsigned int oreg, nreg, val;
+ u16 oreg, nreg, val;
snd_azf3328_mixer_reg_decode(®, kcontrol->private_value);
oreg = snd_azf3328_mixer_inw(chip, reg.reg);
static void
snd_azf3328_codec_setfmt(struct snd_azf3328 *chip,
- unsigned reg,
+ enum snd_azf3328_codec_type codec_type,
enum azf_freq_t bitrate,
unsigned int format_width,
unsigned int channels
)
{
- u16 val = 0xff00;
unsigned long flags;
+ const struct snd_azf3328_codec_data *codec = &chip->codecs[codec_type];
+ u16 val = 0xff00;
snd_azf3328_dbgcallenter();
switch (bitrate) {
spin_lock_irqsave(&chip->reg_lock, flags);
/* set bitrate/format */
- snd_azf3328_codec_outw(chip, reg, val);
+ snd_azf3328_codec_outw(codec, IDX_IO_CODEC_SOUNDFORMAT, val);
/* changing the bitrate/format settings switches off the
* audio output with an annoying click in case of 8/16bit format change
* (FIXME: yes, it works, but what exactly am I doing here?? :)
* FIXME: does this have some side effects for full-duplex
* or other dramatic side effects? */
- if (reg == IDX_IO_PLAY_SOUNDFORMAT) /* only do it for playback */
- snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS,
- snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS) |
- DMA_PLAY_SOMETHING1 |
- DMA_PLAY_SOMETHING2 |
+ if (codec_type == AZF_CODEC_PLAYBACK) /* only do it for playback */
+ snd_azf3328_codec_outw(codec, IDX_IO_CODEC_DMA_FLAGS,
+ snd_azf3328_codec_inw(codec, IDX_IO_CODEC_DMA_FLAGS) |
+ DMA_RUN_SOMETHING1 |
+ DMA_RUN_SOMETHING2 |
SOMETHING_ALMOST_ALWAYS_SET |
DMA_EPILOGUE_SOMETHING |
DMA_SOMETHING_ELSE
static inline void
snd_azf3328_codec_setfmt_lowpower(struct snd_azf3328 *chip,
- unsigned reg
+ enum snd_azf3328_codec_type codec_type
)
{
/* choose lowest frequency for low power consumption.
* While this will cause louder noise due to rather coarse frequency,
* it should never matter since output should always
* get disabled properly when idle anyway. */
- snd_azf3328_codec_setfmt(chip, reg, AZF_FREQ_4000, 8, 1);
+ snd_azf3328_codec_setfmt(chip, codec_type, AZF_FREQ_4000, 8, 1);
}
static void
-snd_azf3328_codec_reg_6AH_update(struct snd_azf3328 *chip,
+snd_azf3328_ctrl_reg_6AH_update(struct snd_azf3328 *chip,
unsigned bitmask,
- int enable
+ bool enable
)
{
- if (enable)
- chip->shadow_reg_codec_6AH &= ~bitmask;
+ bool do_mask = !enable;
+ if (do_mask)
+ chip->shadow_reg_ctrl_6AH |= bitmask;
else
- chip->shadow_reg_codec_6AH |= bitmask;
- snd_azf3328_dbgplay("6AH_update mask 0x%04x enable %d: val 0x%04x\n",
- bitmask, enable, chip->shadow_reg_codec_6AH);
- snd_azf3328_codec_outw(chip, IDX_IO_6AH, chip->shadow_reg_codec_6AH);
+ chip->shadow_reg_ctrl_6AH &= ~bitmask;
+ snd_azf3328_dbgcodec("6AH_update mask 0x%04x do_mask %d: val 0x%04x\n",
+ bitmask, do_mask, chip->shadow_reg_ctrl_6AH);
+ snd_azf3328_ctrl_outw(chip, IDX_IO_6AH, chip->shadow_reg_ctrl_6AH);
}
static inline void
-snd_azf3328_codec_enable(struct snd_azf3328 *chip, int enable)
+snd_azf3328_ctrl_enable_codecs(struct snd_azf3328 *chip, bool enable)
{
- snd_azf3328_dbgplay("codec_enable %d\n", enable);
+ snd_azf3328_dbgcodec("codec_enable %d\n", enable);
/* no idea what exactly is being done here, but I strongly assume it's
* PM related */
- snd_azf3328_codec_reg_6AH_update(
+ snd_azf3328_ctrl_reg_6AH_update(
chip, IO_6A_PAUSE_PLAYBACK_BIT8, enable
);
}
static void
-snd_azf3328_codec_activity(struct snd_azf3328 *chip,
- enum snd_azf3328_stream_index stream_type,
- int enable
+snd_azf3328_ctrl_codec_activity(struct snd_azf3328 *chip,
+ enum snd_azf3328_codec_type codec_type,
+ bool enable
)
{
- int need_change = (chip->audio_stream[stream_type].running != enable);
+ struct snd_azf3328_codec_data *codec = &chip->codecs[codec_type];
+ bool need_change = (codec->running != enable);
- snd_azf3328_dbgplay(
- "codec_activity: type %d, enable %d, need_change %d\n",
- stream_type, enable, need_change
+ snd_azf3328_dbgcodec(
+ "codec_activity: %s codec, enable %d, need_change %d\n",
+ codec->name, enable, need_change
);
if (need_change) {
- enum snd_azf3328_stream_index other =
- (stream_type == AZF_PLAYBACK) ?
- AZF_CAPTURE : AZF_PLAYBACK;
- /* small check to prevent shutting down the other party
- * in case it's active */
- if ((enable) || !(chip->audio_stream[other].running))
- snd_azf3328_codec_enable(chip, enable);
+ static const struct {
+ enum snd_azf3328_codec_type other1;
+ enum snd_azf3328_codec_type other2;
+ } peer_codecs[3] =
+ { { AZF_CODEC_CAPTURE, AZF_CODEC_I2S_OUT },
+ { AZF_CODEC_PLAYBACK, AZF_CODEC_I2S_OUT },
+ { AZF_CODEC_PLAYBACK, AZF_CODEC_CAPTURE } };
+ bool call_function;
+
+ if (enable)
+ /* if enable codec, call enable_codecs func
+ to enable codec supply... */
+ call_function = 1;
+ else {
+ /* ...otherwise call enable_codecs func
+ (which globally shuts down operation of codecs)
+ only in case the other codecs are currently
+ not active either! */
+ call_function =
+ ((!chip->codecs[peer_codecs[codec_type].other1]
+ .running)
+ && (!chip->codecs[peer_codecs[codec_type].other2]
+ .running));
+ }
+ if (call_function)
+ snd_azf3328_ctrl_enable_codecs(chip, enable);
/* ...and adjust clock, too
* (reduce noise and power consumption) */
if (!enable)
snd_azf3328_codec_setfmt_lowpower(
chip,
- chip->audio_stream[stream_type].portbase
- + IDX_IO_PLAY_SOUNDFORMAT
+ codec_type
);
+ codec->running = enable;
}
- chip->audio_stream[stream_type].running = enable;
}
static void
-snd_azf3328_setdmaa(struct snd_azf3328 *chip,
- long unsigned int addr,
- unsigned int count,
- unsigned int size,
- enum snd_azf3328_stream_index stream_type
+snd_azf3328_codec_setdmaa(struct snd_azf3328 *chip,
+ enum snd_azf3328_codec_type codec_type,
+ unsigned long addr,
+ unsigned int count,
+ unsigned int size
)
{
+ const struct snd_azf3328_codec_data *codec = &chip->codecs[codec_type];
snd_azf3328_dbgcallenter();
- if (!chip->audio_stream[stream_type].running) {
- /* AZF3328 uses a two buffer pointer DMA playback approach */
+ if (!codec->running) {
+ /* AZF3328 uses a two buffer pointer DMA transfer approach */
- unsigned long flags, portbase, addr_area2;
+ unsigned long flags, addr_area2;
/* width 32bit (prevent overflow): */
- unsigned long count_areas, count_tmp;
+ u32 count_areas, lengths;
- portbase = chip->audio_stream[stream_type].portbase;
count_areas = size/2;
addr_area2 = addr+count_areas;
count_areas--; /* max. index */
- snd_azf3328_dbgplay("set DMA: buf1 %08lx[%lu], buf2 %08lx[%lu]\n", addr, count_areas, addr_area2, count_areas);
+ snd_azf3328_dbgcodec("setdma: buffers %08lx[%u] / %08lx[%u]\n",
+ addr, count_areas, addr_area2, count_areas);
/* build combined I/O buffer length word */
- count_tmp = count_areas;
- count_areas |= (count_tmp << 16);
+ lengths = (count_areas << 16) | (count_areas);
spin_lock_irqsave(&chip->reg_lock, flags);
- outl(addr, portbase + IDX_IO_PLAY_DMA_START_1);
- outl(addr_area2, portbase + IDX_IO_PLAY_DMA_START_2);
- outl(count_areas, portbase + IDX_IO_PLAY_DMA_LEN_1);
+ snd_azf3328_codec_outl(codec, IDX_IO_CODEC_DMA_START_1, addr);
+ snd_azf3328_codec_outl(codec, IDX_IO_CODEC_DMA_START_2,
+ addr_area2);
+ snd_azf3328_codec_outl(codec, IDX_IO_CODEC_DMA_LENGTHS,
+ lengths);
spin_unlock_irqrestore(&chip->reg_lock, flags);
}
snd_azf3328_dbgcallleave();
}
static int
-snd_azf3328_playback_prepare(struct snd_pcm_substream *substream)
+snd_azf3328_codec_prepare(struct snd_pcm_substream *substream)
{
#if 0
struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
snd_azf3328_dbgcallenter();
#if 0
- snd_azf3328_codec_setfmt(chip, IDX_IO_PLAY_SOUNDFORMAT,
+ snd_azf3328_codec_setfmt(chip, AZF_CODEC_...,
runtime->rate,
snd_pcm_format_width(runtime->format),
runtime->channels);
- snd_azf3328_setdmaa(chip, runtime->dma_addr, count, size, AZF_PLAYBACK);
+ snd_azf3328_codec_setdmaa(chip, AZF_CODEC_...,
+ runtime->dma_addr, count, size);
#endif
snd_azf3328_dbgcallleave();
return 0;
}
static int
-snd_azf3328_capture_prepare(struct snd_pcm_substream *substream)
-{
-#if 0
- struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
- struct snd_pcm_runtime *runtime = substream->runtime;
- unsigned int size = snd_pcm_lib_buffer_bytes(substream);
- unsigned int count = snd_pcm_lib_period_bytes(substream);
-#endif
-
- snd_azf3328_dbgcallenter();
-#if 0
- snd_azf3328_codec_setfmt(chip, IDX_IO_REC_SOUNDFORMAT,
- runtime->rate,
- snd_pcm_format_width(runtime->format),
- runtime->channels);
- snd_azf3328_setdmaa(chip, runtime->dma_addr, count, size, AZF_CAPTURE);
-#endif
- snd_azf3328_dbgcallleave();
- return 0;
-}
-
-static int
-snd_azf3328_playback_trigger(struct snd_pcm_substream *substream, int cmd)
+snd_azf3328_codec_trigger(enum snd_azf3328_codec_type codec_type,
+ struct snd_pcm_substream *substream, int cmd)
{
struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
+ const struct snd_azf3328_codec_data *codec = &chip->codecs[codec_type];
struct snd_pcm_runtime *runtime = substream->runtime;
int result = 0;
- unsigned int status1;
- int previously_muted;
+ u16 flags1;
+ bool previously_muted = 0;
+ bool is_playback_codec = (AZF_CODEC_PLAYBACK == codec_type);
- snd_azf3328_dbgcalls("snd_azf3328_playback_trigger cmd %d\n", cmd);
+ snd_azf3328_dbgcalls("snd_azf3328_codec_trigger cmd %d\n", cmd);
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
- snd_azf3328_dbgplay("START PLAYBACK\n");
-
- /* mute WaveOut (avoid clicking during setup) */
- previously_muted =
- snd_azf3328_mixer_set_mute(chip, IDX_MIXER_WAVEOUT, 1);
+ snd_azf3328_dbgcodec("START %s\n", codec->name);
+
+ if (is_playback_codec) {
+ /* mute WaveOut (avoid clicking during setup) */
+ previously_muted =
+ snd_azf3328_mixer_set_mute(
+ chip, IDX_MIXER_WAVEOUT, 1
+ );
+ }
- snd_azf3328_codec_setfmt(chip, IDX_IO_PLAY_SOUNDFORMAT,
+ snd_azf3328_codec_setfmt(chip, codec_type,
runtime->rate,
snd_pcm_format_width(runtime->format),
runtime->channels);
spin_lock(&chip->reg_lock);
/* first, remember current value: */
- status1 = snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS);
+ flags1 = snd_azf3328_codec_inw(codec, IDX_IO_CODEC_DMA_FLAGS);
- /* stop playback */
- status1 &= ~DMA_RESUME;
- snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, status1);
+ /* stop transfer */
+ flags1 &= ~DMA_RESUME;
+ snd_azf3328_codec_outw(codec, IDX_IO_CODEC_DMA_FLAGS, flags1);
/* FIXME: clear interrupts or what??? */
- snd_azf3328_codec_outw(chip, IDX_IO_PLAY_IRQTYPE, 0xffff);
+ snd_azf3328_codec_outw(codec, IDX_IO_CODEC_IRQTYPE, 0xffff);
spin_unlock(&chip->reg_lock);
- snd_azf3328_setdmaa(chip, runtime->dma_addr,
+ snd_azf3328_codec_setdmaa(chip, codec_type, runtime->dma_addr,
snd_pcm_lib_period_bytes(substream),
- snd_pcm_lib_buffer_bytes(substream),
- AZF_PLAYBACK);
+ snd_pcm_lib_buffer_bytes(substream)
+ );
spin_lock(&chip->reg_lock);
#ifdef WIN9X
/* FIXME: enable playback/recording??? */
- status1 |= DMA_PLAY_SOMETHING1 | DMA_PLAY_SOMETHING2;
- snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, status1);
+ flags1 |= DMA_RUN_SOMETHING1 | DMA_RUN_SOMETHING2;
+ snd_azf3328_codec_outw(codec, IDX_IO_CODEC_DMA_FLAGS, flags1);
- /* start playback again */
+ /* start transfer again */
/* FIXME: what is this value (0x0010)??? */
- status1 |= DMA_RESUME | DMA_EPILOGUE_SOMETHING;
- snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, status1);
+ flags1 |= DMA_RESUME | DMA_EPILOGUE_SOMETHING;
+ snd_azf3328_codec_outw(codec, IDX_IO_CODEC_DMA_FLAGS, flags1);
#else /* NT4 */
- snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS,
+ snd_azf3328_codec_outw(codec, IDX_IO_CODEC_DMA_FLAGS,
0x0000);
- snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS,
- DMA_PLAY_SOMETHING1);
- snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS,
- DMA_PLAY_SOMETHING1 |
- DMA_PLAY_SOMETHING2);
- snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS,
+ snd_azf3328_codec_outw(codec, IDX_IO_CODEC_DMA_FLAGS,
+ DMA_RUN_SOMETHING1);
+ snd_azf3328_codec_outw(codec, IDX_IO_CODEC_DMA_FLAGS,
+ DMA_RUN_SOMETHING1 |
+ DMA_RUN_SOMETHING2);
+ snd_azf3328_codec_outw(codec, IDX_IO_CODEC_DMA_FLAGS,
DMA_RESUME |
SOMETHING_ALMOST_ALWAYS_SET |
DMA_EPILOGUE_SOMETHING |
DMA_SOMETHING_ELSE);
#endif
spin_unlock(&chip->reg_lock);
- snd_azf3328_codec_activity(chip, AZF_PLAYBACK, 1);
-
- /* now unmute WaveOut */
- if (!previously_muted)
- snd_azf3328_mixer_set_mute(chip, IDX_MIXER_WAVEOUT, 0);
+ snd_azf3328_ctrl_codec_activity(chip, codec_type, 1);
+
+ if (is_playback_codec) {
+ /* now unmute WaveOut */
+ if (!previously_muted)
+ snd_azf3328_mixer_set_mute(
+ chip, IDX_MIXER_WAVEOUT, 0
+ );
+ }
- snd_azf3328_dbgplay("STARTED PLAYBACK\n");
+ snd_azf3328_dbgcodec("STARTED %s\n", codec->name);
break;
case SNDRV_PCM_TRIGGER_RESUME:
- snd_azf3328_dbgplay("RESUME PLAYBACK\n");
- /* resume playback if we were active */
+ snd_azf3328_dbgcodec("RESUME %s\n", codec->name);
+ /* resume codec if we were active */
spin_lock(&chip->reg_lock);
- if (chip->audio_stream[AZF_PLAYBACK].running)
- snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS,
- snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS) | DMA_RESUME);
+ if (codec->running)
+ snd_azf3328_codec_outw(codec, IDX_IO_CODEC_DMA_FLAGS,
+ snd_azf3328_codec_inw(
+ codec, IDX_IO_CODEC_DMA_FLAGS
+ ) | DMA_RESUME
+ );
spin_unlock(&chip->reg_lock);
break;
case SNDRV_PCM_TRIGGER_STOP:
- snd_azf3328_dbgplay("STOP PLAYBACK\n");
-
- /* mute WaveOut (avoid clicking during setup) */
- previously_muted =
- snd_azf3328_mixer_set_mute(chip, IDX_MIXER_WAVEOUT, 1);
+ snd_azf3328_dbgcodec("STOP %s\n", codec->name);
+
+ if (is_playback_codec) {
+ /* mute WaveOut (avoid clicking during setup) */
+ previously_muted =
+ snd_azf3328_mixer_set_mute(
+ chip, IDX_MIXER_WAVEOUT, 1
+ );
+ }
spin_lock(&chip->reg_lock);
/* first, remember current value: */
- status1 = snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS);
+ flags1 = snd_azf3328_codec_inw(codec, IDX_IO_CODEC_DMA_FLAGS);
- /* stop playback */
- status1 &= ~DMA_RESUME;
- snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, status1);
+ /* stop transfer */
+ flags1 &= ~DMA_RESUME;
+ snd_azf3328_codec_outw(codec, IDX_IO_CODEC_DMA_FLAGS, flags1);
/* hmm, is this really required? we're resetting the same bit
* immediately thereafter... */
- status1 |= DMA_PLAY_SOMETHING1;
- snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, status1);
+ flags1 |= DMA_RUN_SOMETHING1;
+ snd_azf3328_codec_outw(codec, IDX_IO_CODEC_DMA_FLAGS, flags1);
- status1 &= ~DMA_PLAY_SOMETHING1;
- snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, status1);
+ flags1 &= ~DMA_RUN_SOMETHING1;
+ snd_azf3328_codec_outw(codec, IDX_IO_CODEC_DMA_FLAGS, flags1);
spin_unlock(&chip->reg_lock);
- snd_azf3328_codec_activity(chip, AZF_PLAYBACK, 0);
-
- /* now unmute WaveOut */
- if (!previously_muted)
- snd_azf3328_mixer_set_mute(chip, IDX_MIXER_WAVEOUT, 0);
+ snd_azf3328_ctrl_codec_activity(chip, codec_type, 0);
+
+ if (is_playback_codec) {
+ /* now unmute WaveOut */
+ if (!previously_muted)
+ snd_azf3328_mixer_set_mute(
+ chip, IDX_MIXER_WAVEOUT, 0
+ );
+ }
- snd_azf3328_dbgplay("STOPPED PLAYBACK\n");
+ snd_azf3328_dbgcodec("STOPPED %s\n", codec->name);
break;
case SNDRV_PCM_TRIGGER_SUSPEND:
- snd_azf3328_dbgplay("SUSPEND PLAYBACK\n");
- /* make sure playback is stopped */
- snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS,
- snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS) & ~DMA_RESUME);
+ snd_azf3328_dbgcodec("SUSPEND %s\n", codec->name);
+ /* make sure codec is stopped */
+ snd_azf3328_codec_outw(codec, IDX_IO_CODEC_DMA_FLAGS,
+ snd_azf3328_codec_inw(
+ codec, IDX_IO_CODEC_DMA_FLAGS
+ ) & ~DMA_RESUME
+ );
break;
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
snd_printk(KERN_ERR "FIXME: SNDRV_PCM_TRIGGER_PAUSE_PUSH NIY!\n");
snd_printk(KERN_ERR "FIXME: SNDRV_PCM_TRIGGER_PAUSE_RELEASE NIY!\n");
break;
default:
- printk(KERN_ERR "FIXME: unknown trigger mode!\n");
+ snd_printk(KERN_ERR "FIXME: unknown trigger mode!\n");
return -EINVAL;
}
return result;
}
-/* this is just analogous to playback; I'm not quite sure whether recording
- * should actually be triggered like that */
static int
-snd_azf3328_capture_trigger(struct snd_pcm_substream *substream, int cmd)
+snd_azf3328_codec_playback_trigger(struct snd_pcm_substream *substream, int cmd)
{
- struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
- struct snd_pcm_runtime *runtime = substream->runtime;
- int result = 0;
- unsigned int status1;
-
- snd_azf3328_dbgcalls("snd_azf3328_capture_trigger cmd %d\n", cmd);
-
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
-
- snd_azf3328_dbgplay("START CAPTURE\n");
-
- snd_azf3328_codec_setfmt(chip, IDX_IO_REC_SOUNDFORMAT,
- runtime->rate,
- snd_pcm_format_width(runtime->format),
- runtime->channels);
-
- spin_lock(&chip->reg_lock);
- /* first, remember current value: */
- status1 = snd_azf3328_codec_inw(chip, IDX_IO_REC_FLAGS);
-
- /* stop recording */
- status1 &= ~DMA_RESUME;
- snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, status1);
-
- /* FIXME: clear interrupts or what??? */
- snd_azf3328_codec_outw(chip, IDX_IO_REC_IRQTYPE, 0xffff);
- spin_unlock(&chip->reg_lock);
-
- snd_azf3328_setdmaa(chip, runtime->dma_addr,
- snd_pcm_lib_period_bytes(substream),
- snd_pcm_lib_buffer_bytes(substream),
- AZF_CAPTURE);
-
- spin_lock(&chip->reg_lock);
-#ifdef WIN9X
- /* FIXME: enable playback/recording??? */
- status1 |= DMA_PLAY_SOMETHING1 | DMA_PLAY_SOMETHING2;
- snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, status1);
-
- /* start capture again */
- /* FIXME: what is this value (0x0010)??? */
- status1 |= DMA_RESUME | DMA_EPILOGUE_SOMETHING;
- snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, status1);
-#else
- snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS,
- 0x0000);
- snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS,
- DMA_PLAY_SOMETHING1);
- snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS,
- DMA_PLAY_SOMETHING1 |
- DMA_PLAY_SOMETHING2);
- snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS,
- DMA_RESUME |
- SOMETHING_ALMOST_ALWAYS_SET |
- DMA_EPILOGUE_SOMETHING |
- DMA_SOMETHING_ELSE);
-#endif
- spin_unlock(&chip->reg_lock);
- snd_azf3328_codec_activity(chip, AZF_CAPTURE, 1);
-
- snd_azf3328_dbgplay("STARTED CAPTURE\n");
- break;
- case SNDRV_PCM_TRIGGER_RESUME:
- snd_azf3328_dbgplay("RESUME CAPTURE\n");
- /* resume recording if we were active */
- spin_lock(&chip->reg_lock);
- if (chip->audio_stream[AZF_CAPTURE].running)
- snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS,
- snd_azf3328_codec_inw(chip, IDX_IO_REC_FLAGS) | DMA_RESUME);
- spin_unlock(&chip->reg_lock);
- break;
- case SNDRV_PCM_TRIGGER_STOP:
- snd_azf3328_dbgplay("STOP CAPTURE\n");
-
- spin_lock(&chip->reg_lock);
- /* first, remember current value: */
- status1 = snd_azf3328_codec_inw(chip, IDX_IO_REC_FLAGS);
-
- /* stop recording */
- status1 &= ~DMA_RESUME;
- snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, status1);
-
- status1 |= DMA_PLAY_SOMETHING1;
- snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, status1);
-
- status1 &= ~DMA_PLAY_SOMETHING1;
- snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, status1);
- spin_unlock(&chip->reg_lock);
- snd_azf3328_codec_activity(chip, AZF_CAPTURE, 0);
+ return snd_azf3328_codec_trigger(AZF_CODEC_PLAYBACK, substream, cmd);
+}
- snd_azf3328_dbgplay("STOPPED CAPTURE\n");
- break;
- case SNDRV_PCM_TRIGGER_SUSPEND:
- snd_azf3328_dbgplay("SUSPEND CAPTURE\n");
- /* make sure recording is stopped */
- snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS,
- snd_azf3328_codec_inw(chip, IDX_IO_REC_FLAGS) & ~DMA_RESUME);
- break;
- case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- snd_printk(KERN_ERR "FIXME: SNDRV_PCM_TRIGGER_PAUSE_PUSH NIY!\n");
- break;
- case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- snd_printk(KERN_ERR "FIXME: SNDRV_PCM_TRIGGER_PAUSE_RELEASE NIY!\n");
- break;
- default:
- printk(KERN_ERR "FIXME: unknown trigger mode!\n");
- return -EINVAL;
- }
+static int
+snd_azf3328_codec_capture_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+ return snd_azf3328_codec_trigger(AZF_CODEC_CAPTURE, substream, cmd);
+}
- snd_azf3328_dbgcallleave();
- return result;
+static int
+snd_azf3328_codec_i2s_out_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+ return snd_azf3328_codec_trigger(AZF_CODEC_I2S_OUT, substream, cmd);
}
static snd_pcm_uframes_t
-snd_azf3328_playback_pointer(struct snd_pcm_substream *substream)
+snd_azf3328_codec_pointer(struct snd_pcm_substream *substream,
+ enum snd_azf3328_codec_type codec_type
+)
{
- struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
+ const struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
+ const struct snd_azf3328_codec_data *codec = &chip->codecs[codec_type];
unsigned long bufptr, result;
snd_pcm_uframes_t frmres;
#ifdef QUERY_HARDWARE
- bufptr = snd_azf3328_codec_inl(chip, IDX_IO_PLAY_DMA_START_1);
+ bufptr = snd_azf3328_codec_inl(codec, IDX_IO_CODEC_DMA_START_1);
#else
bufptr = substream->runtime->dma_addr;
#endif
- result = snd_azf3328_codec_inl(chip, IDX_IO_PLAY_DMA_CURRPOS);
+ result = snd_azf3328_codec_inl(codec, IDX_IO_CODEC_DMA_CURRPOS);
/* calculate offset */
result -= bufptr;
frmres = bytes_to_frames( substream->runtime, result);
- snd_azf3328_dbgplay("PLAY @ 0x%8lx, frames %8ld\n", result, frmres);
+ snd_azf3328_dbgcodec("%s @ 0x%8lx, frames %8ld\n",
+ codec->name, result, frmres);
return frmres;
}
static snd_pcm_uframes_t
-snd_azf3328_capture_pointer(struct snd_pcm_substream *substream)
+snd_azf3328_codec_playback_pointer(struct snd_pcm_substream *substream)
{
- struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
- unsigned long bufptr, result;
- snd_pcm_uframes_t frmres;
+ return snd_azf3328_codec_pointer(substream, AZF_CODEC_PLAYBACK);
+}
-#ifdef QUERY_HARDWARE
- bufptr = snd_azf3328_codec_inl(chip, IDX_IO_REC_DMA_START_1);
-#else
- bufptr = substream->runtime->dma_addr;
-#endif
- result = snd_azf3328_codec_inl(chip, IDX_IO_REC_DMA_CURRPOS);
+static snd_pcm_uframes_t
+snd_azf3328_codec_capture_pointer(struct snd_pcm_substream *substream)
+{
+ return snd_azf3328_codec_pointer(substream, AZF_CODEC_CAPTURE);
+}
- /* calculate offset */
- result -= bufptr;
- frmres = bytes_to_frames( substream->runtime, result);
- snd_azf3328_dbgplay("REC @ 0x%8lx, frames %8ld\n", result, frmres);
- return frmres;
+static snd_pcm_uframes_t
+snd_azf3328_codec_i2s_out_pointer(struct snd_pcm_substream *substream)
+{
+ return snd_azf3328_codec_pointer(substream, AZF_CODEC_I2S_OUT);
}
/******************************************************************/
#ifdef SUPPORT_GAMEPORT
static inline void
-snd_azf3328_gameport_irq_enable(struct snd_azf3328 *chip, int enable)
+snd_azf3328_gameport_irq_enable(struct snd_azf3328 *chip,
+ bool enable
+)
{
snd_azf3328_io_reg_setb(
chip->game_io+IDX_GAME_HWCONFIG,
}
static inline void
-snd_azf3328_gameport_legacy_address_enable(struct snd_azf3328 *chip, int enable)
+snd_azf3328_gameport_legacy_address_enable(struct snd_azf3328 *chip,
+ bool enable
+)
{
snd_azf3328_io_reg_setb(
chip->game_io+IDX_GAME_HWCONFIG,
);
}
+static void
+snd_azf3328_gameport_set_counter_frequency(struct snd_azf3328 *chip,
+ unsigned int freq_cfg
+)
+{
+ snd_azf3328_io_reg_setb(
+ chip->game_io+IDX_GAME_HWCONFIG,
+ 0x02,
+ (freq_cfg & 1) != 0
+ );
+ snd_azf3328_io_reg_setb(
+ chip->game_io+IDX_GAME_HWCONFIG,
+ 0x04,
+ (freq_cfg & 2) != 0
+ );
+}
+
static inline void
-snd_azf3328_gameport_axis_circuit_enable(struct snd_azf3328 *chip, int enable)
+snd_azf3328_gameport_axis_circuit_enable(struct snd_azf3328 *chip, bool enable)
{
- snd_azf3328_codec_reg_6AH_update(
+ snd_azf3328_ctrl_reg_6AH_update(
chip, IO_6A_SOMETHING2_GAMEPORT, enable
);
}
break;
}
+ snd_azf3328_gameport_set_counter_frequency(chip,
+ GAME_HWCFG_ADC_COUNTER_FREQ_STD);
snd_azf3328_gameport_axis_circuit_enable(chip, (res == 0));
return res;
struct snd_azf3328 *chip = gameport_get_port_data(gameport);
snd_azf3328_dbggame("gameport_close\n");
+ snd_azf3328_gameport_set_counter_frequency(chip,
+ GAME_HWCFG_ADC_COUNTER_FREQ_1_200);
snd_azf3328_gameport_axis_circuit_enable(chip, 0);
}
val = snd_azf3328_game_inb(chip, IDX_GAME_AXES_CONFIG);
if (val & GAME_AXES_SAMPLING_READY) {
- for (i = 0; i < 4; ++i) {
+ for (i = 0; i < ARRAY_SIZE(chip->axes); ++i) {
/* configure the axis to read */
val = (i << 4) | 0x0f;
snd_azf3328_game_outb(chip, IDX_GAME_AXES_CONFIG, val);
snd_azf3328_game_outw(chip, IDX_GAME_AXIS_VALUE, 0xffff);
spin_unlock_irqrestore(&chip->reg_lock, flags);
- for (i = 0; i < 4; i++) {
+ for (i = 0; i < ARRAY_SIZE(chip->axes); i++) {
axes[i] = chip->axes[i];
if (axes[i] == 0xffff)
axes[i] = -1;
/* DISABLE legacy address: we don't need it! */
snd_azf3328_gameport_legacy_address_enable(chip, 0);
+ snd_azf3328_gameport_set_counter_frequency(chip,
+ GAME_HWCFG_ADC_COUNTER_FREQ_1_200);
snd_azf3328_gameport_axis_circuit_enable(chip, 0);
gameport_register_port(chip->gameport);
static inline void
snd_azf3328_irq_log_unknown_type(u8 which)
{
- snd_azf3328_dbgplay(
+ snd_azf3328_dbgcodec(
"azt3328: unknown IRQ type (%x) occurred, please report!\n",
which
);
}
+static inline void
+snd_azf3328_codec_interrupt(struct snd_azf3328 *chip, u8 status)
+{
+ u8 which;
+ enum snd_azf3328_codec_type codec_type;
+ const struct snd_azf3328_codec_data *codec;
+
+ for (codec_type = AZF_CODEC_PLAYBACK;
+ codec_type <= AZF_CODEC_I2S_OUT;
+ ++codec_type) {
+
+ /* skip codec if there's no interrupt for it */
+ if (!(status & (1 << codec_type)))
+ continue;
+
+ codec = &chip->codecs[codec_type];
+
+ spin_lock(&chip->reg_lock);
+ which = snd_azf3328_codec_inb(codec, IDX_IO_CODEC_IRQTYPE);
+ /* ack all IRQ types immediately */
+ snd_azf3328_codec_outb(codec, IDX_IO_CODEC_IRQTYPE, which);
+ spin_unlock(&chip->reg_lock);
+
+ if ((chip->pcm[codec_type]) && (codec->substream)) {
+ snd_pcm_period_elapsed(codec->substream);
+ snd_azf3328_dbgcodec("%s period done (#%x), @ %x\n",
+ codec->name,
+ which,
+ snd_azf3328_codec_inl(
+ codec, IDX_IO_CODEC_DMA_CURRPOS
+ )
+ );
+ } else
+ printk(KERN_WARNING "azt3328: irq handler problem!\n");
+ if (which & IRQ_SOMETHING)
+ snd_azf3328_irq_log_unknown_type(which);
+ }
+}
+
static irqreturn_t
snd_azf3328_interrupt(int irq, void *dev_id)
{
struct snd_azf3328 *chip = dev_id;
- u8 status, which;
-#if DEBUG_PLAY_REC
+ u8 status;
+#if DEBUG_CODEC
static unsigned long irq_count;
#endif
- status = snd_azf3328_codec_inb(chip, IDX_IO_IRQSTATUS);
+ status = snd_azf3328_ctrl_inb(chip, IDX_IO_IRQSTATUS);
/* fast path out, to ease interrupt sharing */
if (!(status &
- (IRQ_PLAYBACK|IRQ_RECORDING|IRQ_GAMEPORT|IRQ_MPU401|IRQ_TIMER)
+ (IRQ_PLAYBACK|IRQ_RECORDING|IRQ_I2S_OUT
+ |IRQ_GAMEPORT|IRQ_MPU401|IRQ_TIMER)
))
return IRQ_NONE; /* must be interrupt for another device */
- snd_azf3328_dbgplay(
- "irq_count %ld! IDX_IO_PLAY_FLAGS %04x, "
- "IDX_IO_PLAY_IRQTYPE %04x, IDX_IO_IRQSTATUS %04x\n",
+ snd_azf3328_dbgcodec(
+ "irq_count %ld! IDX_IO_IRQSTATUS %04x\n",
irq_count++ /* debug-only */,
- snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS),
- snd_azf3328_codec_inw(chip, IDX_IO_PLAY_IRQTYPE),
status
);
if (status & IRQ_TIMER) {
- /* snd_azf3328_dbgplay("timer %ld\n",
+ /* snd_azf3328_dbgcodec("timer %ld\n",
snd_azf3328_codec_inl(chip, IDX_IO_TIMER_VALUE)
& TIMER_VALUE_MASK
); */
snd_timer_interrupt(chip->timer, chip->timer->sticks);
/* ACK timer */
spin_lock(&chip->reg_lock);
- snd_azf3328_codec_outb(chip, IDX_IO_TIMER_VALUE + 3, 0x07);
+ snd_azf3328_ctrl_outb(chip, IDX_IO_TIMER_VALUE + 3, 0x07);
spin_unlock(&chip->reg_lock);
- snd_azf3328_dbgplay("azt3328: timer IRQ\n");
+ snd_azf3328_dbgcodec("azt3328: timer IRQ\n");
}
- if (status & IRQ_PLAYBACK) {
- spin_lock(&chip->reg_lock);
- which = snd_azf3328_codec_inb(chip, IDX_IO_PLAY_IRQTYPE);
- /* ack all IRQ types immediately */
- snd_azf3328_codec_outb(chip, IDX_IO_PLAY_IRQTYPE, which);
- spin_unlock(&chip->reg_lock);
- if (chip->pcm && chip->audio_stream[AZF_PLAYBACK].substream) {
- snd_pcm_period_elapsed(
- chip->audio_stream[AZF_PLAYBACK].substream
- );
- snd_azf3328_dbgplay("PLAY period done (#%x), @ %x\n",
- which,
- snd_azf3328_codec_inl(
- chip, IDX_IO_PLAY_DMA_CURRPOS
- )
- );
- } else
- printk(KERN_WARNING "azt3328: irq handler problem!\n");
- if (which & IRQ_PLAY_SOMETHING)
- snd_azf3328_irq_log_unknown_type(which);
- }
- if (status & IRQ_RECORDING) {
- spin_lock(&chip->reg_lock);
- which = snd_azf3328_codec_inb(chip, IDX_IO_REC_IRQTYPE);
- /* ack all IRQ types immediately */
- snd_azf3328_codec_outb(chip, IDX_IO_REC_IRQTYPE, which);
- spin_unlock(&chip->reg_lock);
+ if (status & (IRQ_PLAYBACK|IRQ_RECORDING|IRQ_I2S_OUT))
+ snd_azf3328_codec_interrupt(chip, status);
- if (chip->pcm && chip->audio_stream[AZF_CAPTURE].substream) {
- snd_pcm_period_elapsed(
- chip->audio_stream[AZF_CAPTURE].substream
- );
- snd_azf3328_dbgplay("REC period done (#%x), @ %x\n",
- which,
- snd_azf3328_codec_inl(
- chip, IDX_IO_REC_DMA_CURRPOS
- )
- );
- } else
- printk(KERN_WARNING "azt3328: irq handler problem!\n");
- if (which & IRQ_REC_SOMETHING)
- snd_azf3328_irq_log_unknown_type(which);
- }
if (status & IRQ_GAMEPORT)
snd_azf3328_gameport_interrupt(chip);
+
/* MPU401 has less critical IRQ requirements
* than timer and playback/recording, right? */
if (status & IRQ_MPU401) {
snd_mpu401_uart_interrupt(irq, chip->rmidi->private_data);
/* hmm, do we have to ack the IRQ here somehow?
- * If so, then I don't know how... */
- snd_azf3328_dbgplay("azt3328: MPU401 IRQ\n");
+ * If so, then I don't know how yet... */
+ snd_azf3328_dbgcodec("azt3328: MPU401 IRQ\n");
}
return IRQ_HANDLED;
}
/*****************************************************************/
-static const struct snd_pcm_hardware snd_azf3328_playback =
+/* as long as we think we have identical snd_pcm_hardware parameters
+ for playback, capture and i2s out, we can use the same physical struct
+ since the struct is simply being copied into a member.
+*/
+static const struct snd_pcm_hardware snd_azf3328_hardware =
{
/* FIXME!! Correct? */
.info = SNDRV_PCM_INFO_MMAP |
.fifo_size = 0,
};
-static const struct snd_pcm_hardware snd_azf3328_capture =
-{
- /* FIXME */
- .info = SNDRV_PCM_INFO_MMAP |
- SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_MMAP_VALID,
- .formats = SNDRV_PCM_FMTBIT_S8 |
- SNDRV_PCM_FMTBIT_U8 |
- SNDRV_PCM_FMTBIT_S16_LE |
- SNDRV_PCM_FMTBIT_U16_LE,
- .rates = SNDRV_PCM_RATE_5512 |
- SNDRV_PCM_RATE_8000_48000 |
- SNDRV_PCM_RATE_KNOT,
- .rate_min = AZF_FREQ_4000,
- .rate_max = AZF_FREQ_66200,
- .channels_min = 1,
- .channels_max = 2,
- .buffer_bytes_max = 65536,
- .period_bytes_min = 64,
- .period_bytes_max = 65536,
- .periods_min = 1,
- .periods_max = 1024,
- .fifo_size = 0,
-};
-
static unsigned int snd_azf3328_fixed_rates[] = {
AZF_FREQ_4000,
/*****************************************************************/
static int
-snd_azf3328_playback_open(struct snd_pcm_substream *substream)
+snd_azf3328_pcm_open(struct snd_pcm_substream *substream,
+ enum snd_azf3328_codec_type codec_type
+)
{
struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
struct snd_pcm_runtime *runtime = substream->runtime;
snd_azf3328_dbgcallenter();
- chip->audio_stream[AZF_PLAYBACK].substream = substream;
- runtime->hw = snd_azf3328_playback;
+ chip->codecs[codec_type].substream = substream;
+
+ /* same parameters for all our codecs - at least we think so... */
+ runtime->hw = snd_azf3328_hardware;
+
snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE,
&snd_azf3328_hw_constraints_rates);
snd_azf3328_dbgcallleave();
return 0;
}
+static int
+snd_azf3328_playback_open(struct snd_pcm_substream *substream)
+{
+ return snd_azf3328_pcm_open(substream, AZF_CODEC_PLAYBACK);
+}
+
static int
snd_azf3328_capture_open(struct snd_pcm_substream *substream)
{
- struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
- struct snd_pcm_runtime *runtime = substream->runtime;
+ return snd_azf3328_pcm_open(substream, AZF_CODEC_CAPTURE);
+}
- snd_azf3328_dbgcallenter();
- chip->audio_stream[AZF_CAPTURE].substream = substream;
- runtime->hw = snd_azf3328_capture;
- snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE,
- &snd_azf3328_hw_constraints_rates);
- snd_azf3328_dbgcallleave();
- return 0;
+static int
+snd_azf3328_i2s_out_open(struct snd_pcm_substream *substream)
+{
+ return snd_azf3328_pcm_open(substream, AZF_CODEC_I2S_OUT);
}
static int
-snd_azf3328_playback_close(struct snd_pcm_substream *substream)
+snd_azf3328_pcm_close(struct snd_pcm_substream *substream,
+ enum snd_azf3328_codec_type codec_type
+)
{
struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
snd_azf3328_dbgcallenter();
- chip->audio_stream[AZF_PLAYBACK].substream = NULL;
+ chip->codecs[codec_type].substream = NULL;
snd_azf3328_dbgcallleave();
return 0;
}
+static int
+snd_azf3328_playback_close(struct snd_pcm_substream *substream)
+{
+ return snd_azf3328_pcm_close(substream, AZF_CODEC_PLAYBACK);
+}
+
static int
snd_azf3328_capture_close(struct snd_pcm_substream *substream)
{
- struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
+ return snd_azf3328_pcm_close(substream, AZF_CODEC_CAPTURE);
+}
- snd_azf3328_dbgcallenter();
- chip->audio_stream[AZF_CAPTURE].substream = NULL;
- snd_azf3328_dbgcallleave();
- return 0;
+static int
+snd_azf3328_i2s_out_close(struct snd_pcm_substream *substream)
+{
+ return snd_azf3328_pcm_close(substream, AZF_CODEC_I2S_OUT);
}
/******************************************************************/
.ioctl = snd_pcm_lib_ioctl,
.hw_params = snd_azf3328_hw_params,
.hw_free = snd_azf3328_hw_free,
- .prepare = snd_azf3328_playback_prepare,
- .trigger = snd_azf3328_playback_trigger,
- .pointer = snd_azf3328_playback_pointer
+ .prepare = snd_azf3328_codec_prepare,
+ .trigger = snd_azf3328_codec_playback_trigger,
+ .pointer = snd_azf3328_codec_playback_pointer
};
static struct snd_pcm_ops snd_azf3328_capture_ops = {
.ioctl = snd_pcm_lib_ioctl,
.hw_params = snd_azf3328_hw_params,
.hw_free = snd_azf3328_hw_free,
- .prepare = snd_azf3328_capture_prepare,
- .trigger = snd_azf3328_capture_trigger,
- .pointer = snd_azf3328_capture_pointer
+ .prepare = snd_azf3328_codec_prepare,
+ .trigger = snd_azf3328_codec_capture_trigger,
+ .pointer = snd_azf3328_codec_capture_pointer
+};
+
+static struct snd_pcm_ops snd_azf3328_i2s_out_ops = {
+ .open = snd_azf3328_i2s_out_open,
+ .close = snd_azf3328_i2s_out_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = snd_azf3328_hw_params,
+ .hw_free = snd_azf3328_hw_free,
+ .prepare = snd_azf3328_codec_prepare,
+ .trigger = snd_azf3328_codec_i2s_out_trigger,
+ .pointer = snd_azf3328_codec_i2s_out_pointer
};
static int __devinit
-snd_azf3328_pcm(struct snd_azf3328 *chip, int device)
+snd_azf3328_pcm(struct snd_azf3328 *chip)
{
+enum { AZF_PCMDEV_STD, AZF_PCMDEV_I2S_OUT, NUM_AZF_PCMDEVS }; /* pcm devices */
+
struct snd_pcm *pcm;
int err;
snd_azf3328_dbgcallenter();
- if ((err = snd_pcm_new(chip->card, "AZF3328 DSP", device, 1, 1, &pcm)) < 0)
+
+ err = snd_pcm_new(chip->card, "AZF3328 DSP", AZF_PCMDEV_STD,
+ 1, 1, &pcm);
+ if (err < 0)
return err;
- snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_azf3328_playback_ops);
- snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_azf3328_capture_ops);
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
+ &snd_azf3328_playback_ops);
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE,
+ &snd_azf3328_capture_ops);
pcm->private_data = chip;
pcm->info_flags = 0;
strcpy(pcm->name, chip->card->shortname);
- chip->pcm = pcm;
+ /* same pcm object for playback/capture (see snd_pcm_new() above) */
+ chip->pcm[AZF_CODEC_PLAYBACK] = pcm;
+ chip->pcm[AZF_CODEC_CAPTURE] = pcm;
snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
- snd_dma_pci_data(chip->pci), 64*1024, 64*1024);
+ snd_dma_pci_data(chip->pci),
+ 64*1024, 64*1024);
+
+ err = snd_pcm_new(chip->card, "AZF3328 I2S OUT", AZF_PCMDEV_I2S_OUT,
+ 1, 0, &pcm);
+ if (err < 0)
+ return err;
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
+ &snd_azf3328_i2s_out_ops);
+
+ pcm->private_data = chip;
+ pcm->info_flags = 0;
+ strcpy(pcm->name, chip->card->shortname);
+ chip->pcm[AZF_CODEC_I2S_OUT] = pcm;
+
+ snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
+ snd_dma_pci_data(chip->pci),
+ 64*1024, 64*1024);
snd_azf3328_dbgcallleave();
return 0;
snd_azf3328_dbgtimer("setting timer countdown value %d, add COUNTDOWN|IRQ\n", delay);
delay |= TIMER_COUNTDOWN_ENABLE | TIMER_IRQ_ENABLE;
spin_lock_irqsave(&chip->reg_lock, flags);
- snd_azf3328_codec_outl(chip, IDX_IO_TIMER_VALUE, delay);
+ snd_azf3328_ctrl_outl(chip, IDX_IO_TIMER_VALUE, delay);
spin_unlock_irqrestore(&chip->reg_lock, flags);
snd_azf3328_dbgcallleave();
return 0;
spin_lock_irqsave(&chip->reg_lock, flags);
/* disable timer countdown and interrupt */
/* FIXME: should we write TIMER_IRQ_ACK here? */
- snd_azf3328_codec_outb(chip, IDX_IO_TIMER_VALUE + 3, 0);
+ snd_azf3328_ctrl_outb(chip, IDX_IO_TIMER_VALUE + 3, 0);
spin_unlock_irqrestore(&chip->reg_lock, flags);
snd_azf3328_dbgcallleave();
return 0;
outb(val, reg);
- printk(KERN_ERR "reg %04x bit %d: %02x %02x %02x\n",
+ printk(KERN_DEBUG "reg %04x bit %d: %02x %02x %02x\n",
reg, bit, val, valoff, valon
);
}
u16 tmp;
snd_azf3328_dbgmisc(
- "codec_io 0x%lx, game_io 0x%lx, mpu_io 0x%lx, "
+ "ctrl_io 0x%lx, game_io 0x%lx, mpu_io 0x%lx, "
"opl3_io 0x%lx, mixer_io 0x%lx, irq %d\n",
- chip->codec_io, chip->game_io, chip->mpu_io,
+ chip->ctrl_io, chip->game_io, chip->mpu_io,
chip->opl3_io, chip->mixer_io, chip->irq
);
inb(0x38c + tmp)
);
- for (tmp = 0; tmp < AZF_IO_SIZE_CODEC; tmp += 2)
- snd_azf3328_dbgmisc("codec 0x%02x: 0x%04x\n",
- tmp, snd_azf3328_codec_inw(chip, tmp)
+ for (tmp = 0; tmp < AZF_IO_SIZE_CTRL; tmp += 2)
+ snd_azf3328_dbgmisc("ctrl 0x%02x: 0x%04x\n",
+ tmp, snd_azf3328_ctrl_inw(chip, tmp)
);
for (tmp = 0; tmp < AZF_IO_SIZE_MIXER; tmp += 2)
static struct snd_device_ops ops = {
.dev_free = snd_azf3328_dev_free,
};
- u16 tmp;
+ u8 dma_init;
+ enum snd_azf3328_codec_type codec_type;
*rchip = NULL;
if (err < 0)
goto out_err;
- chip->codec_io = pci_resource_start(pci, 0);
+ chip->ctrl_io = pci_resource_start(pci, 0);
chip->game_io = pci_resource_start(pci, 1);
chip->mpu_io = pci_resource_start(pci, 2);
- chip->opl3_io = pci_resource_start(pci, 3);
+ chip->opl3_io = pci_resource_start(pci, 3);
chip->mixer_io = pci_resource_start(pci, 4);
- chip->audio_stream[AZF_PLAYBACK].portbase = chip->codec_io + 0x00;
- chip->audio_stream[AZF_CAPTURE].portbase = chip->codec_io + 0x20;
+ chip->codecs[AZF_CODEC_PLAYBACK].io_base =
+ chip->ctrl_io + AZF_IO_OFFS_CODEC_PLAYBACK;
+ chip->codecs[AZF_CODEC_PLAYBACK].name = "PLAYBACK";
+ chip->codecs[AZF_CODEC_CAPTURE].io_base =
+ chip->ctrl_io + AZF_IO_OFFS_CODEC_CAPTURE;
+ chip->codecs[AZF_CODEC_CAPTURE].name = "CAPTURE";
+ chip->codecs[AZF_CODEC_I2S_OUT].io_base =
+ chip->ctrl_io + AZF_IO_OFFS_CODEC_I2S_OUT;
+ chip->codecs[AZF_CODEC_I2S_OUT].name = "I2S_OUT";
if (request_irq(pci->irq, snd_azf3328_interrupt,
IRQF_SHARED, card->shortname, chip)) {
if (err < 0)
goto out_err;
- /* shutdown codecs to save power */
- /* have snd_azf3328_codec_activity() act properly */
- chip->audio_stream[AZF_PLAYBACK].running = 1;
- snd_azf3328_codec_activity(chip, AZF_PLAYBACK, 0);
+ /* standard codec init stuff */
+ /* default DMA init value */
+ dma_init = DMA_RUN_SOMETHING2|DMA_EPILOGUE_SOMETHING|DMA_SOMETHING_ELSE;
- /* standard chip init stuff */
- /* default IRQ init value */
- tmp = DMA_PLAY_SOMETHING2|DMA_EPILOGUE_SOMETHING|DMA_SOMETHING_ELSE;
+ for (codec_type = AZF_CODEC_PLAYBACK;
+ codec_type <= AZF_CODEC_I2S_OUT; ++codec_type) {
+ struct snd_azf3328_codec_data *codec =
+ &chip->codecs[codec_type];
- spin_lock_irq(&chip->reg_lock);
- snd_azf3328_codec_outb(chip, IDX_IO_PLAY_FLAGS, tmp);
- snd_azf3328_codec_outb(chip, IDX_IO_REC_FLAGS, tmp);
- snd_azf3328_codec_outb(chip, IDX_IO_SOMETHING_FLAGS, tmp);
- spin_unlock_irq(&chip->reg_lock);
+ /* shutdown codecs to save power */
+ /* have ...ctrl_codec_activity() act properly */
+ codec->running = 1;
+ snd_azf3328_ctrl_codec_activity(chip, codec_type, 0);
+
+ spin_lock_irq(&chip->reg_lock);
+ snd_azf3328_codec_outb(codec, IDX_IO_CODEC_DMA_FLAGS,
+ dma_init);
+ spin_unlock_irq(&chip->reg_lock);
+ }
snd_card_set_dev(card, &pci->dev);
card->private_data = chip;
+ /* chose to use MPU401_HW_AZT2320 ID instead of MPU401_HW_MPU401,
+ since our hardware ought to be similar, thus use same ID. */
err = snd_mpu401_uart_new(
- card, 0, MPU401_HW_MPU401, chip->mpu_io, MPU401_INFO_INTEGRATED,
+ card, 0,
+ MPU401_HW_AZT2320, chip->mpu_io, MPU401_INFO_INTEGRATED,
pci->irq, 0, &chip->rmidi
);
if (err < 0) {
if (err < 0)
goto out_err;
- err = snd_azf3328_pcm(chip, 0);
+ err = snd_azf3328_pcm(chip);
if (err < 0)
goto out_err;
opl3->private_data = chip;
sprintf(card->longname, "%s at 0x%lx, irq %i",
- card->shortname, chip->codec_io, chip->irq);
+ card->shortname, chip->ctrl_io, chip->irq);
err = snd_card_register(card);
if (err < 0)
goto out_err;
#ifdef MODULE
- printk(
+ printk(KERN_INFO
"azt3328: Sound driver for Aztech AZF3328-based soundcards such as PCI168.\n"
"azt3328: Hardware was completely undocumented, unfortunately.\n"
"azt3328: Feel free to contact andi AT lisas.de for bug reports etc.!\n"
}
#ifdef CONFIG_PM
+static inline void
+snd_azf3328_suspend_regs(unsigned long io_addr, unsigned count, u32 *saved_regs)
+{
+ unsigned reg;
+
+ for (reg = 0; reg < count; ++reg) {
+ *saved_regs = inl(io_addr);
+ snd_azf3328_dbgpm("suspend: io 0x%04lx: 0x%08x\n",
+ io_addr, *saved_regs);
+ ++saved_regs;
+ io_addr += sizeof(*saved_regs);
+ }
+}
+
static int
snd_azf3328_suspend(struct pci_dev *pci, pm_message_t state)
{
struct snd_card *card = pci_get_drvdata(pci);
struct snd_azf3328 *chip = card->private_data;
- unsigned reg;
+ u16 *saved_regs_ctrl_u16;
snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
- snd_pcm_suspend_all(chip->pcm);
+ snd_pcm_suspend_all(chip->pcm[AZF_CODEC_PLAYBACK]);
+ snd_pcm_suspend_all(chip->pcm[AZF_CODEC_I2S_OUT]);
- for (reg = 0; reg < AZF_IO_SIZE_MIXER_PM / 2; ++reg)
- chip->saved_regs_mixer[reg] = inw(chip->mixer_io + reg * 2);
+ snd_azf3328_suspend_regs(chip->mixer_io,
+ ARRAY_SIZE(chip->saved_regs_mixer), chip->saved_regs_mixer);
/* make sure to disable master volume etc. to prevent looping sound */
snd_azf3328_mixer_set_mute(chip, IDX_MIXER_PLAY_MASTER, 1);
snd_azf3328_mixer_set_mute(chip, IDX_MIXER_WAVEOUT, 1);
- for (reg = 0; reg < AZF_IO_SIZE_CODEC_PM / 2; ++reg)
- chip->saved_regs_codec[reg] = inw(chip->codec_io + reg * 2);
+ snd_azf3328_suspend_regs(chip->ctrl_io,
+ ARRAY_SIZE(chip->saved_regs_ctrl), chip->saved_regs_ctrl);
/* manually store the one currently relevant write-only reg, too */
- chip->saved_regs_codec[IDX_IO_6AH / 2] = chip->shadow_reg_codec_6AH;
+ saved_regs_ctrl_u16 = (u16 *)chip->saved_regs_ctrl;
+ saved_regs_ctrl_u16[IDX_IO_6AH / 2] = chip->shadow_reg_ctrl_6AH;
- for (reg = 0; reg < AZF_IO_SIZE_GAME_PM / 2; ++reg)
- chip->saved_regs_game[reg] = inw(chip->game_io + reg * 2);
- for (reg = 0; reg < AZF_IO_SIZE_MPU_PM / 2; ++reg)
- chip->saved_regs_mpu[reg] = inw(chip->mpu_io + reg * 2);
- for (reg = 0; reg < AZF_IO_SIZE_OPL3_PM / 2; ++reg)
- chip->saved_regs_opl3[reg] = inw(chip->opl3_io + reg * 2);
+ snd_azf3328_suspend_regs(chip->game_io,
+ ARRAY_SIZE(chip->saved_regs_game), chip->saved_regs_game);
+ snd_azf3328_suspend_regs(chip->mpu_io,
+ ARRAY_SIZE(chip->saved_regs_mpu), chip->saved_regs_mpu);
+ snd_azf3328_suspend_regs(chip->opl3_io,
+ ARRAY_SIZE(chip->saved_regs_opl3), chip->saved_regs_opl3);
pci_disable_device(pci);
pci_save_state(pci);
return 0;
}
+static inline void
+snd_azf3328_resume_regs(const u32 *saved_regs,
+ unsigned long io_addr,
+ unsigned count
+)
+{
+ unsigned reg;
+
+ for (reg = 0; reg < count; ++reg) {
+ outl(*saved_regs, io_addr);
+ snd_azf3328_dbgpm("resume: io 0x%04lx: 0x%08x --> 0x%08x\n",
+ io_addr, *saved_regs, inl(io_addr));
+ ++saved_regs;
+ io_addr += sizeof(*saved_regs);
+ }
+}
+
static int
snd_azf3328_resume(struct pci_dev *pci)
{
struct snd_card *card = pci_get_drvdata(pci);
- struct snd_azf3328 *chip = card->private_data;
- unsigned reg;
+ const struct snd_azf3328 *chip = card->private_data;
pci_set_power_state(pci, PCI_D0);
pci_restore_state(pci);
}
pci_set_master(pci);
- for (reg = 0; reg < AZF_IO_SIZE_GAME_PM / 2; ++reg)
- outw(chip->saved_regs_game[reg], chip->game_io + reg * 2);
- for (reg = 0; reg < AZF_IO_SIZE_MPU_PM / 2; ++reg)
- outw(chip->saved_regs_mpu[reg], chip->mpu_io + reg * 2);
- for (reg = 0; reg < AZF_IO_SIZE_OPL3_PM / 2; ++reg)
- outw(chip->saved_regs_opl3[reg], chip->opl3_io + reg * 2);
- for (reg = 0; reg < AZF_IO_SIZE_MIXER_PM / 2; ++reg)
- outw(chip->saved_regs_mixer[reg], chip->mixer_io + reg * 2);
- for (reg = 0; reg < AZF_IO_SIZE_CODEC_PM / 2; ++reg)
- outw(chip->saved_regs_codec[reg], chip->codec_io + reg * 2);
+ snd_azf3328_resume_regs(chip->saved_regs_game, chip->game_io,
+ ARRAY_SIZE(chip->saved_regs_game));
+ snd_azf3328_resume_regs(chip->saved_regs_mpu, chip->mpu_io,
+ ARRAY_SIZE(chip->saved_regs_mpu));
+ snd_azf3328_resume_regs(chip->saved_regs_opl3, chip->opl3_io,
+ ARRAY_SIZE(chip->saved_regs_opl3));
+
+ snd_azf3328_resume_regs(chip->saved_regs_mixer, chip->mixer_io,
+ ARRAY_SIZE(chip->saved_regs_mixer));
+
+ /* unfortunately with 32bit transfers, IDX_MIXER_PLAY_MASTER (0x02)
+ and IDX_MIXER_RESET (offset 0x00) get touched at the same time,
+ resulting in a mixer reset condition persisting until _after_
+ master vol was restored. Thus master vol needs an extra restore. */
+ outw(((u16 *)chip->saved_regs_mixer)[1], chip->mixer_io + 2);
+
+ snd_azf3328_resume_regs(chip->saved_regs_ctrl, chip->ctrl_io,
+ ARRAY_SIZE(chip->saved_regs_ctrl));
snd_power_change_state(card, SNDRV_CTL_POWER_D0);
return 0;
/*** main I/O area port indices ***/
/* (only 0x70 of 0x80 bytes saved/restored by Windows driver) */
-#define AZF_IO_SIZE_CODEC 0x80
-#define AZF_IO_SIZE_CODEC_PM 0x70
+#define AZF_IO_SIZE_CTRL 0x80
+#define AZF_IO_SIZE_CTRL_PM 0x70
-/* the driver initialisation suggests a layout of 4 main areas:
- * from 0x00 (playback), from 0x20 (recording) and from 0x40 (maybe MPU401??).
+/* the driver initialisation suggests a layout of 4 areas
+ * within the main card control I/O:
+ * from 0x00 (playback codec), from 0x20 (recording codec)
+ * and from 0x40 (most certainly I2S out codec).
* And another area from 0x60 to 0x6f (DirectX timer, IRQ management,
* power management etc.???). */
-/** playback area **/
-#define IDX_IO_PLAY_FLAGS 0x00 /* PU:0x0000 */
+#define AZF_IO_OFFS_CODEC_PLAYBACK 0x00
+#define AZF_IO_OFFS_CODEC_CAPTURE 0x20
+#define AZF_IO_OFFS_CODEC_I2S_OUT 0x40
+
+#define IDX_IO_CODEC_DMA_FLAGS 0x00 /* PU:0x0000 */
/* able to reactivate output after output muting due to 8/16bit
* output change, just like 0x0002.
* 0x0001 is the only bit that's able to start the DMA counter */
- #define DMA_RESUME 0x0001 /* paused if cleared ? */
+ #define DMA_RESUME 0x0001 /* paused if cleared? */
/* 0x0002 *temporarily* set during DMA stopping. hmm
* both 0x0002 and 0x0004 set in playback setup. */
/* able to reactivate output after output muting due to 8/16bit
* output change, just like 0x0001. */
- #define DMA_PLAY_SOMETHING1 0x0002 /* \ alternated (toggled) */
+ #define DMA_RUN_SOMETHING1 0x0002 /* \ alternated (toggled) */
/* 0x0004: NOT able to reactivate output */
- #define DMA_PLAY_SOMETHING2 0x0004 /* / bits */
+ #define DMA_RUN_SOMETHING2 0x0004 /* / bits */
#define SOMETHING_ALMOST_ALWAYS_SET 0x0008 /* ???; can be modified */
#define DMA_EPILOGUE_SOMETHING 0x0010
#define DMA_SOMETHING_ELSE 0x0020 /* ??? */
- #define SOMETHING_UNMODIFIABLE 0xffc0 /* unused ? not modifiable */
-#define IDX_IO_PLAY_IRQTYPE 0x02 /* PU:0x0001 */
+ #define SOMETHING_UNMODIFIABLE 0xffc0 /* unused? not modifiable */
+#define IDX_IO_CODEC_IRQTYPE 0x02 /* PU:0x0001 */
/* write back to flags in case flags are set, in order to ACK IRQ in handler
* (bit 1 of port 0x64 indicates interrupt for one of these three types)
* sometimes in this case it just writes 0xffff to globally ACK all IRQs
* settings written are not reflected when reading back, though.
- * seems to be IRQ, too (frequently used: port |= 0x07 !), but who knows ? */
- #define IRQ_PLAY_SOMETHING 0x0001 /* something & ACK */
- #define IRQ_FINISHED_PLAYBUF_1 0x0002 /* 1st dmabuf finished & ACK */
- #define IRQ_FINISHED_PLAYBUF_2 0x0004 /* 2nd dmabuf finished & ACK */
+ * seems to be IRQ, too (frequently used: port |= 0x07 !), but who knows? */
+ #define IRQ_SOMETHING 0x0001 /* something & ACK */
+ #define IRQ_FINISHED_DMABUF_1 0x0002 /* 1st dmabuf finished & ACK */
+ #define IRQ_FINISHED_DMABUF_2 0x0004 /* 2nd dmabuf finished & ACK */
#define IRQMASK_SOME_STATUS_1 0x0008 /* \ related bits */
#define IRQMASK_SOME_STATUS_2 0x0010 /* / (checked together in loop) */
- #define IRQMASK_UNMODIFIABLE 0xffe0 /* unused ? not modifiable */
-#define IDX_IO_PLAY_DMA_START_1 0x04 /* start address of 1st DMA play area, PU:0x00000000 */
-#define IDX_IO_PLAY_DMA_START_2 0x08 /* start address of 2nd DMA play area, PU:0x00000000 */
-#define IDX_IO_PLAY_DMA_LEN_1 0x0c /* length of 1st DMA play area, PU:0x0000 */
-#define IDX_IO_PLAY_DMA_LEN_2 0x0e /* length of 2nd DMA play area, PU:0x0000 */
-#define IDX_IO_PLAY_DMA_CURRPOS 0x10 /* current DMA position, PU:0x00000000 */
-#define IDX_IO_PLAY_DMA_CURROFS 0x14 /* offset within current DMA play area, PU:0x0000 */
-#define IDX_IO_PLAY_SOUNDFORMAT 0x16 /* PU:0x0010 */
+ #define IRQMASK_UNMODIFIABLE 0xffe0 /* unused? not modifiable */
+ /* start address of 1st DMA transfer area, PU:0x00000000 */
+#define IDX_IO_CODEC_DMA_START_1 0x04
+ /* start address of 2nd DMA transfer area, PU:0x00000000 */
+#define IDX_IO_CODEC_DMA_START_2 0x08
+ /* both lengths of DMA transfer areas, PU:0x00000000
+ length1: offset 0x0c, length2: offset 0x0e */
+#define IDX_IO_CODEC_DMA_LENGTHS 0x0c
+#define IDX_IO_CODEC_DMA_CURRPOS 0x10 /* current DMA position, PU:0x00000000 */
+ /* offset within current DMA transfer area, PU:0x0000 */
+#define IDX_IO_CODEC_DMA_CURROFS 0x14
+#define IDX_IO_CODEC_SOUNDFORMAT 0x16 /* PU:0x0010 */
/* all unspecified bits can't be modified */
#define SOUNDFORMAT_FREQUENCY_MASK 0x000f
#define SOUNDFORMAT_XTAL1 0x00
#define SOUNDFORMAT_FLAG_16BIT 0x0010
#define SOUNDFORMAT_FLAG_2CHANNELS 0x0020
+
/* define frequency helpers, for maximum value safety */
enum azf_freq_t {
#define AZF_FREQ(rate) AZF_FREQ_##rate = rate
#undef AZF_FREQ
};
-/** recording area (see also: playback bit flag definitions) **/
-#define IDX_IO_REC_FLAGS 0x20 /* ??, PU:0x0000 */
-#define IDX_IO_REC_IRQTYPE 0x22 /* ??, PU:0x0000 */
- #define IRQ_REC_SOMETHING 0x0001 /* something & ACK */
- #define IRQ_FINISHED_RECBUF_1 0x0002 /* 1st dmabuf finished & ACK */
- #define IRQ_FINISHED_RECBUF_2 0x0004 /* 2nd dmabuf finished & ACK */
- /* hmm, maybe these are just the corresponding *recording* flags ?
- * but OTOH they are most likely at port 0x22 instead */
- #define IRQMASK_SOME_STATUS_1 0x0008 /* \ related bits */
- #define IRQMASK_SOME_STATUS_2 0x0010 /* / (checked together in loop) */
-#define IDX_IO_REC_DMA_START_1 0x24 /* PU:0x00000000 */
-#define IDX_IO_REC_DMA_START_2 0x28 /* PU:0x00000000 */
-#define IDX_IO_REC_DMA_LEN_1 0x2c /* PU:0x0000 */
-#define IDX_IO_REC_DMA_LEN_2 0x2e /* PU:0x0000 */
-#define IDX_IO_REC_DMA_CURRPOS 0x30 /* PU:0x00000000 */
-#define IDX_IO_REC_DMA_CURROFS 0x34 /* PU:0x00000000 */
-#define IDX_IO_REC_SOUNDFORMAT 0x36 /* PU:0x0000 */
-
-/** hmm, what is this I/O area for? MPU401?? or external DAC via I2S?? (after playback, recording, ???, timer) **/
-#define IDX_IO_SOMETHING_FLAGS 0x40 /* gets set to 0x34 just like port 0x0 and 0x20 on card init, PU:0x0000 */
-/* general */
-#define IDX_IO_42H 0x42 /* PU:0x0001 */
-
/** DirectX timer, main interrupt area (FIXME: and something else?) **/
#define IDX_IO_TIMER_VALUE 0x60 /* found this timer area by pure luck :-) */
/* timer countdown value; triggers IRQ when timer is finished */
#define IDX_IO_IRQSTATUS 0x64
/* some IRQ bit in here might also be used to signal a power-management timer
* timeout, to request shutdown of the chip (e.g. AD1815JS has such a thing).
- * Some OPL3 hardware (e.g. in LM4560) has some special timer hardware which
- * can trigger an OPL3 timer IRQ, so maybe there's such a thing as well... */
+ * OPL3 hardware contains several timers which confusingly in most cases
+ * are NOT routed to an IRQ, but some designs (e.g. LM4560) DO support that,
+ * so I wouldn't be surprised at all to discover that AZF3328
+ * supports that thing as well... */
#define IRQ_PLAYBACK 0x0001
#define IRQ_RECORDING 0x0002
- #define IRQ_UNKNOWN1 0x0004 /* most probably I2S port */
+ #define IRQ_I2S_OUT 0x0004 /* this IS I2S, right!? (untested) */
#define IRQ_GAMEPORT 0x0008 /* Interrupt of Digital(ly) Enhanced Game Port */
#define IRQ_MPU401 0x0010
#define IRQ_TIMER 0x0020 /* DirectX timer */
- #define IRQ_UNKNOWN2 0x0040 /* probably unused, or possibly I2S port? */
- #define IRQ_UNKNOWN3 0x0080 /* probably unused, or possibly I2S port? */
+ #define IRQ_UNKNOWN2 0x0040 /* probably unused, or possibly OPL3 timer? */
+ #define IRQ_UNKNOWN3 0x0080 /* probably unused, or possibly OPL3 timer? */
#define IDX_IO_66H 0x66 /* writing 0xffff returns 0x0000 */
/* this is set to e.g. 0x3ff or 0x300, and writable;
* maybe some buffer limit, but I couldn't find out more, PU:0x00ff: */
/*** Gameport area port indices ***/
/* (only 0x06 of 0x08 bytes saved/restored by Windows driver) */
#define AZF_IO_SIZE_GAME 0x08
-#define AZF_IO_SIZE_GAME_PM 0x06
+#define AZF_IO_SIZE_GAME_PM 0x06
enum {
AZF_GAME_LEGACY_IO_PORT = 0x200
* 11 --> 1/200: */
#define GAME_HWCFG_ADC_COUNTER_FREQ_MASK 0x06
+ /* FIXME: these values might be reversed... */
+ #define GAME_HWCFG_ADC_COUNTER_FREQ_STD 0
+ #define GAME_HWCFG_ADC_COUNTER_FREQ_1_2 1
+ #define GAME_HWCFG_ADC_COUNTER_FREQ_1_20 2
+ #define GAME_HWCFG_ADC_COUNTER_FREQ_1_200 3
+
/* enable gameport legacy I/O address (0x200)
* I was unable to locate any configurability for a different address: */
#define GAME_HWCFG_LEGACY_ADDRESS_ENABLE 0x08
#define AZF_IO_SIZE_MPU_PM 0x04
/*** OPL3 synth ***/
+/* (only 0x06 of 0x08 bytes saved/restored by Windows driver) */
#define AZF_IO_SIZE_OPL3 0x08
#define AZF_IO_SIZE_OPL3_PM 0x06
/* hmm, given that a standard OPL3 has 4 registers only,
#define SET_CHAN_LEFT 1
#define SET_CHAN_RIGHT 2
+/* helper macro to align I/O port ranges to 32bit I/O width */
+#define AZF_ALIGN(x) (((x) + 3) & (~3))
+
#endif /* __SOUND_AZT3328_H */
.rate_max = 192000,
.channels_min = 2,
.channels_max = 2,
- .buffer_bytes_max = ((65536 - 64) * 8),
+ .buffer_bytes_max = 65536 - 128,
.period_bytes_min = 64,
- .period_bytes_max = (65536 - 64),
+ .period_bytes_max = 32768 - 64,
.periods_min = 2,
.periods_max = 2,
.fifo_size = 0,
#ifdef CONFIG_SND_CS46XX_NEW_DSP
-#define CS46XX_MIN_PERIOD_SIZE 1
+#define CS46XX_MIN_PERIOD_SIZE 64
#define CS46XX_MAX_PERIOD_SIZE 1024*1024
#else
#define CS46XX_MIN_PERIOD_SIZE 2048
/* Timer Registers */
-#define TIMER_TIMR 0x1B7004
-#define INTERRUPT_GIP 0x1B7010
-#define INTERRUPT_GIE 0x1B7014
+#define WC 0x1b7000
+#define TIMR 0x1b7004
+# define TIMR_IE (1<<15)
+# define TIMR_IP (1<<14)
+#define GIP 0x1b7010
+#define GIE 0x1b7014
/* I2C Registers */
#define I2C_IF_ADDRESS 0x1B9000
hw = amixer->rsc.hw;
hw->amixer_set_mode(amixer->rsc.ctrl_blk, AMIXER_Y_IMMEDIATE);
amixer->input = rsc;
- if (NULL == rsc)
+ if (!rsc)
hw->amixer_set_x(amixer->rsc.ctrl_blk, BLANK_SLOT);
else
hw->amixer_set_x(amixer->rsc.ctrl_blk,
hw = amixer->rsc.hw;
amixer->sum = sum;
- if (NULL == sum) {
+ if (!sum) {
hw->amixer_set_se(amixer->rsc.ctrl_blk, 0);
} else {
hw->amixer_set_se(amixer->rsc.ctrl_blk, 1);
/* Program master and conjugate resources */
amixer->rsc.ops->master(&amixer->rsc);
- if (NULL != input)
+ if (input)
input->ops->master(input);
- if (NULL != sum)
+ if (sum)
sum->rsc.ops->master(&sum->rsc);
for (i = 0; i < amixer->rsc.msr; i++) {
hw->amixer_set_dirty_all(amixer->rsc.ctrl_blk);
- if (NULL != input) {
+ if (input) {
hw->amixer_set_x(amixer->rsc.ctrl_blk,
input->ops->output_slot(input));
input->ops->next_conj(input);
}
- if (NULL != sum) {
+ if (sum) {
hw->amixer_set_sadr(amixer->rsc.ctrl_blk,
sum->rsc.ops->index(&sum->rsc));
sum->rsc.ops->next_conj(&sum->rsc);
amixer->rsc.ops->next_conj(&amixer->rsc);
}
amixer->rsc.ops->master(&amixer->rsc);
- if (NULL != input)
+ if (input)
input->ops->master(input);
- if (NULL != sum)
+ if (sum)
sum->rsc.ops->master(&sum->rsc);
return 0;
/* Allocate mem for amixer resource */
amixer = kzalloc(sizeof(*amixer), GFP_KERNEL);
- if (NULL == amixer) {
- err = -ENOMEM;
- return err;
- }
+ if (!amixer)
+ return -ENOMEM;
/* Check whether there are sufficient
* amixer resources to meet request. */
+ err = 0;
spin_lock_irqsave(&mgr->mgr_lock, flags);
for (i = 0; i < desc->msr; i++) {
err = mgr_get_resource(&mgr->mgr, 1, &idx);
*ramixer_mgr = NULL;
amixer_mgr = kzalloc(sizeof(*amixer_mgr), GFP_KERNEL);
- if (NULL == amixer_mgr)
+ if (!amixer_mgr)
return -ENOMEM;
err = rsc_mgr_init(&amixer_mgr->mgr, AMIXER, AMIXER_RESOURCE_NUM, hw);
/* Allocate mem for sum resource */
sum = kzalloc(sizeof(*sum), GFP_KERNEL);
- if (NULL == sum) {
- err = -ENOMEM;
- return err;
- }
+ if (!sum)
+ return -ENOMEM;
/* Check whether there are sufficient sum resources to meet request. */
+ err = 0;
spin_lock_irqsave(&mgr->mgr_lock, flags);
for (i = 0; i < desc->msr; i++) {
err = mgr_get_resource(&mgr->mgr, 1, &idx);
*rsum_mgr = NULL;
sum_mgr = kzalloc(sizeof(*sum_mgr), GFP_KERNEL);
- if (NULL == sum_mgr)
+ if (!sum_mgr)
return -ENOMEM;
err = rsc_mgr_init(&sum_mgr->mgr, SUM, SUM_RESOURCE_NUM, hw);
struct snd_pcm_runtime *runtime;
struct ct_vm *vm;
- if (NULL == apcm->substream)
+ if (!apcm->substream)
return 0;
runtime = apcm->substream->runtime;
apcm->vm_block = vm->map(vm, apcm->substream, runtime->dma_bytes);
- if (NULL == apcm->vm_block)
+ if (!apcm->vm_block)
return -ENOENT;
return 0;
{
struct ct_vm *vm;
- if (NULL == apcm->vm_block)
+ if (!apcm->vm_block)
return;
vm = atc->vm;
static int select_rom(unsigned int pitch)
{
- if ((pitch > 0x00428f5c) && (pitch < 0x01b851ec)) {
+ if (pitch > 0x00428f5c && pitch < 0x01b851ec) {
/* 0.26 <= pitch <= 1.72 */
return 1;
- } else if ((0x01d66666 == pitch) || (0x01d66667 == pitch)) {
+ } else if (pitch == 0x01d66666 || pitch == 0x01d66667) {
/* pitch == 1.8375 */
return 2;
- } else if (0x02000000 == pitch) {
+ } else if (pitch == 0x02000000) {
/* pitch == 2 */
return 3;
- } else if ((pitch >= 0x0) && (pitch <= 0x08000000)) {
+ } else if (pitch >= 0x0 && pitch <= 0x08000000) {
/* 0 <= pitch <= 8 */
return 0;
} else {
/* Get AMIXER resource */
n_amixer = (n_amixer < 2) ? 2 : n_amixer;
apcm->amixers = kzalloc(sizeof(void *)*n_amixer, GFP_KERNEL);
- if (NULL == apcm->amixers) {
+ if (!apcm->amixers) {
err = -ENOMEM;
goto error1;
}
INIT_VOL, atc->pcm[i+device*2]);
mutex_unlock(&atc->atc_mutex);
src = src->ops->next_interleave(src);
- if (NULL == src)
+ if (!src)
src = apcm->src;
}
struct srcimp *srcimp;
int i;
- if (NULL != apcm->srcimps) {
+ if (apcm->srcimps) {
for (i = 0; i < apcm->n_srcimp; i++) {
srcimp = apcm->srcimps[i];
srcimp->ops->unmap(srcimp);
apcm->srcimps = NULL;
}
- if (NULL != apcm->srccs) {
+ if (apcm->srccs) {
for (i = 0; i < apcm->n_srcc; i++) {
src_mgr->put_src(src_mgr, apcm->srccs[i]);
apcm->srccs[i] = NULL;
apcm->srccs = NULL;
}
- if (NULL != apcm->amixers) {
+ if (apcm->amixers) {
for (i = 0; i < apcm->n_amixer; i++) {
amixer_mgr->put_amixer(amixer_mgr, apcm->amixers[i]);
apcm->amixers[i] = NULL;
apcm->amixers = NULL;
}
- if (NULL != apcm->mono) {
+ if (apcm->mono) {
sum_mgr->put_sum(sum_mgr, apcm->mono);
apcm->mono = NULL;
}
- if (NULL != apcm->src) {
+ if (apcm->src) {
src_mgr->put_src(src_mgr, apcm->src);
apcm->src = NULL;
}
- if (NULL != apcm->vm_block) {
+ if (apcm->vm_block) {
/* Undo device virtual mem map */
ct_unmap_audio_buffer(atc, apcm);
apcm->vm_block = NULL;
src->ops->set_state(src, SRC_STATE_OFF);
src->ops->commit_write(src);
- if (NULL != apcm->srccs) {
+ if (apcm->srccs) {
for (i = 0; i < apcm->n_srcc; i++) {
src = apcm->srccs[i];
src->ops->set_bm(src, 0);
if (n_srcc) {
apcm->srccs = kzalloc(sizeof(void *)*n_srcc, GFP_KERNEL);
- if (NULL == apcm->srccs)
+ if (!apcm->srccs)
return -ENOMEM;
}
if (n_amixer) {
apcm->amixers = kzalloc(sizeof(void *)*n_amixer, GFP_KERNEL);
- if (NULL == apcm->amixers) {
+ if (!apcm->amixers) {
err = -ENOMEM;
goto error1;
}
}
apcm->srcimps = kzalloc(sizeof(void *)*n_srcimp, GFP_KERNEL);
- if (NULL == apcm->srcimps) {
+ if (!apcm->srcimps) {
err = -ENOMEM;
goto error1;
}
/* Get AMIXER resource */
n_amixer = (n_amixer < 2) ? 2 : n_amixer;
apcm->amixers = kzalloc(sizeof(void *)*n_amixer, GFP_KERNEL);
- if (NULL == apcm->amixers) {
+ if (!apcm->amixers) {
err = -ENOMEM;
goto error1;
}
amixer = apcm->amixers[i];
amixer->ops->setup(amixer, &src->rsc, INIT_VOL, NULL);
src = src->ops->next_interleave(src);
- if (NULL == src)
+ if (!src)
src = apcm->src;
}
/* Connect to SPDIFOO */
struct ct_mixer *mixer = NULL;
/* disconnect internal mixer objects */
- if (NULL != atc->mixer) {
+ if (atc->mixer) {
mixer = atc->mixer;
mixer->set_input_left(mixer, MIX_LINE_IN, NULL);
mixer->set_input_right(mixer, MIX_LINE_IN, NULL);
mixer->set_input_right(mixer, MIX_SPDIF_IN, NULL);
}
- if (NULL != atc->daios) {
+ if (atc->daios) {
daio_mgr = (struct daio_mgr *)atc->rsc_mgrs[DAIO];
for (i = 0; i < atc->n_daio; i++) {
daio = atc->daios[i];
atc->daios = NULL;
}
- if (NULL != atc->pcm) {
+ if (atc->pcm) {
sum_mgr = atc->rsc_mgrs[SUM];
for (i = 0; i < atc->n_pcm; i++)
sum_mgr->put_sum(sum_mgr, atc->pcm[i]);
atc->pcm = NULL;
}
- if (NULL != atc->srcs) {
+ if (atc->srcs) {
src_mgr = atc->rsc_mgrs[SRC];
for (i = 0; i < atc->n_src; i++)
src_mgr->put_src(src_mgr, atc->srcs[i]);
atc->srcs = NULL;
}
- if (NULL != atc->srcimps) {
+ if (atc->srcimps) {
srcimp_mgr = atc->rsc_mgrs[SRCIMP];
for (i = 0; i < atc->n_srcimp; i++) {
srcimp = atc->srcimps[i];
{
int i = 0;
- if (NULL == atc)
+ if (!atc)
return 0;
if (atc->timer) {
atc_release_resources(atc);
/* Destroy internal mixer objects */
- if (NULL != atc->mixer)
+ if (atc->mixer)
ct_mixer_destroy(atc->mixer);
for (i = 0; i < NUM_RSCTYP; i++) {
- if ((NULL != rsc_mgr_funcs[i].destroy) &&
- (NULL != atc->rsc_mgrs[i]))
+ if (rsc_mgr_funcs[i].destroy && atc->rsc_mgrs[i])
rsc_mgr_funcs[i].destroy(atc->rsc_mgrs[i]);
}
- if (NULL != atc->hw)
+ if (atc->hw)
destroy_hw_obj((struct hw *)atc->hw);
/* Destroy device virtual memory manager object */
- if (NULL != atc->vm) {
+ if (atc->vm) {
ct_vm_destroy(atc->vm);
atc->vm = NULL;
}
alsa_dev_funcs[MIXER].public_name = atc->chip_name;
for (i = 0; i < NUM_CTALSADEVS; i++) {
- if (NULL == alsa_dev_funcs[i].create)
+ if (!alsa_dev_funcs[i].create)
continue;
err = alsa_dev_funcs[i].create(atc, i,
return err;
for (i = 0; i < NUM_RSCTYP; i++) {
- if (NULL == rsc_mgr_funcs[i].create)
+ if (!rsc_mgr_funcs[i].create)
continue;
err = rsc_mgr_funcs[i].create(atc->hw, &atc->rsc_mgrs[i]);
int err, i;
atc->daios = kzalloc(sizeof(void *)*(DAIONUM), GFP_KERNEL);
- if (NULL == atc->daios)
+ if (!atc->daios)
return -ENOMEM;
atc->srcs = kzalloc(sizeof(void *)*(2*2), GFP_KERNEL);
- if (NULL == atc->srcs)
+ if (!atc->srcs)
return -ENOMEM;
atc->srcimps = kzalloc(sizeof(void *)*(2*2), GFP_KERNEL);
- if (NULL == atc->srcimps)
+ if (!atc->srcimps)
return -ENOMEM;
atc->pcm = kzalloc(sizeof(void *)*(2*4), GFP_KERNEL);
- if (NULL == atc->pcm)
+ if (!atc->pcm)
return -ENOMEM;
daio_mgr = (struct daio_mgr *)atc->rsc_mgrs[DAIO];
*ratc = NULL;
atc = kzalloc(sizeof(*atc), GFP_KERNEL);
- if (NULL == atc)
+ if (!atc)
return -ENOMEM;
/* Set operations */
struct daio_rsc_idx idx_20k2[NUM_DAIOTYP] = {
[LINEO1] = {.left = 0x40, .right = 0x41},
- [LINEO2] = {.left = 0x70, .right = 0x71},
+ [LINEO2] = {.left = 0x60, .right = 0x61},
[LINEO3] = {.left = 0x50, .right = 0x51},
- [LINEO4] = {.left = 0x60, .right = 0x61},
+ [LINEO4] = {.left = 0x70, .right = 0x71},
[LINEIM] = {.left = 0x45, .right = 0xc5},
[SPDIFOO] = {.left = 0x00, .right = 0x01},
[SPDIFIO] = {.left = 0x05, .right = 0x85},
int i;
entry = kzalloc((sizeof(*entry) * daio->rscl.msr), GFP_KERNEL);
- if (NULL == entry)
+ if (!entry)
return -ENOMEM;
/* Program master and conjugate resources */
int i;
entry = kzalloc((sizeof(*entry) * daio->rscr.msr), GFP_KERNEL);
- if (NULL == entry)
+ if (!entry)
return -ENOMEM;
/* Program master and conjugate resources */
struct daio *daio = &dao->daio;
int i;
- if (NULL == dao->imappers[0])
+ if (!dao->imappers[0])
return 0;
entry = dao->imappers[0];
struct daio *daio = &dao->daio;
int i;
- if (NULL == dao->imappers[daio->rscl.msr])
+ if (!dao->imappers[daio->rscl.msr])
return 0;
entry = dao->imappers[daio->rscl.msr];
return err;
dao->imappers = kzalloc(sizeof(void *)*desc->msr*2, GFP_KERNEL);
- if (NULL == dao->imappers) {
+ if (!dao->imappers) {
err = -ENOMEM;
goto error1;
}
static int dao_rsc_uninit(struct dao *dao)
{
- if (NULL != dao->imappers) {
- if (NULL != dao->imappers[0])
+ if (dao->imappers) {
+ if (dao->imappers[0])
dao_clear_left_input(dao);
- if (NULL != dao->imappers[dao->daio.rscl.msr])
+ if (dao->imappers[dao->daio.rscl.msr])
dao_clear_right_input(dao);
kfree(dao->imappers);
/* Allocate mem for daio resource */
if (desc->type <= DAIO_OUT_MAX) {
dao = kzalloc(sizeof(*dao), GFP_KERNEL);
- if (NULL == dao) {
+ if (!dao) {
err = -ENOMEM;
goto error;
}
*rdaio = &dao->daio;
} else {
dai = kzalloc(sizeof(*dai), GFP_KERNEL);
- if (NULL == dai) {
+ if (!dai) {
err = -ENOMEM;
goto error;
}
return 0;
error:
- if (NULL != dao)
+ if (dao)
kfree(dao);
- else if (NULL != dai)
+ else if (dai)
kfree(dai);
spin_lock_irqsave(&mgr->mgr_lock, flags);
int err;
spin_lock_irqsave(&mgr->imap_lock, flags);
- if ((0 == entry->addr) && (mgr->init_imap_added)) {
+ if (!entry->addr && mgr->init_imap_added) {
input_mapper_delete(&mgr->imappers, mgr->init_imap,
daio_map_op, mgr);
mgr->init_imap_added = 0;
*rdaio_mgr = NULL;
daio_mgr = kzalloc(sizeof(*daio_mgr), GFP_KERNEL);
- if (NULL == daio_mgr)
+ if (!daio_mgr)
return -ENOMEM;
err = rsc_mgr_init(&daio_mgr->mgr, DAIO, DAIO_RESOURCE_NUM, hw);
spin_lock_init(&daio_mgr->imap_lock);
INIT_LIST_HEAD(&daio_mgr->imappers);
entry = kzalloc(sizeof(*entry), GFP_KERNEL);
- if (NULL == entry) {
+ if (!entry) {
err = -ENOMEM;
goto error2;
}
*rblk = NULL;
blk = kzalloc(sizeof(*blk), GFP_KERNEL);
- if (NULL == blk)
+ if (!blk)
return -ENOMEM;
*rblk = blk;
*rblk = NULL;
blk = kzalloc(sizeof(*blk), GFP_KERNEL);
- if (NULL == blk)
+ if (!blk)
return -ENOMEM;
*rblk = blk;
*rblk = NULL;
blk = kzalloc(sizeof(*blk), GFP_KERNEL);
- if (NULL == blk)
+ if (!blk)
return -ENOMEM;
*rblk = blk;
*rblk = NULL;
blk = kzalloc(sizeof(*blk), GFP_KERNEL);
- if (NULL == blk)
+ if (!blk)
return -ENOMEM;
*rblk = blk;
*rblk = NULL;
/*blk = kzalloc(sizeof(*blk), GFP_KERNEL);
- if (NULL == blk)
+ if (!blk)
return -ENOMEM;
*rblk = blk;*/
*rblk = NULL;
blk = kzalloc(sizeof(*blk), GFP_KERNEL);
- if (NULL == blk)
+ if (!blk)
return -ENOMEM;
*rblk = blk;
*rblk = NULL;
blk = kzalloc(sizeof(*blk), GFP_KERNEL);
- if (NULL == blk)
+ if (!blk)
return -ENOMEM;
*rblk = blk;
*rblk = NULL;
blk = kzalloc(sizeof(*blk), GFP_KERNEL);
- if (NULL == blk)
+ if (!blk)
return -ENOMEM;
blk->i2sctl = hw_read_20kx(hw, I2SCTL);
/* By default, Hendrix card UAA Bar0 should be using memory... */
io_base = pci_resource_start(pci, 0);
mem_base = ioremap(io_base, pci_resource_len(pci, 0));
- if (NULL == mem_base)
+ if (!mem_base)
return -ENOENT;
/* Read current mode from Mode Change Register */
hw->irq = -1;
- if (NULL != ((void *)hw->mem_base))
+ if (hw->mem_base)
iounmap((void *)hw->mem_base);
hw->mem_base = (unsigned long)NULL;
*rhw = NULL;
hw20k1 = kzalloc(sizeof(*hw20k1), GFP_KERNEL);
- if (NULL == hw20k1)
+ if (!hw20k1)
return -ENOMEM;
spin_lock_init(&hw20k1->reg_20k1_lock);
*rblk = NULL;
blk = kzalloc(sizeof(*blk), GFP_KERNEL);
- if (NULL == blk)
+ if (!blk)
return -ENOMEM;
*rblk = blk;
*rblk = NULL;
blk = kzalloc(sizeof(*blk), GFP_KERNEL);
- if (NULL == blk)
+ if (!blk)
return -ENOMEM;
*rblk = blk;
*rblk = NULL;
blk = kzalloc(sizeof(*blk), GFP_KERNEL);
- if (NULL == blk)
+ if (!blk)
return -ENOMEM;
*rblk = blk;
*rblk = NULL;
blk = kzalloc(sizeof(*blk), GFP_KERNEL);
- if (NULL == blk)
+ if (!blk)
return -ENOMEM;
*rblk = blk;
*rblk = NULL;
blk = kzalloc(sizeof(*blk), GFP_KERNEL);
- if (NULL == blk)
+ if (!blk)
return -ENOMEM;
*rblk = blk;
*rblk = NULL;
blk = kzalloc(sizeof(*blk), GFP_KERNEL);
- if (NULL == blk)
+ if (!blk)
return -ENOMEM;
*rblk = blk;
*rblk = NULL;
blk = kzalloc(sizeof(*blk), GFP_KERNEL);
- if (NULL == blk)
+ if (!blk)
return -ENOMEM;
for (i = 0; i < 8; i++) {
return 0;
}
+/* Timer interrupt */
+static int set_timer_irq(struct hw *hw, int enable)
+{
+ hw_write_20kx(hw, GIE, enable ? IT_INT : 0);
+ return 0;
+}
+
+static int set_timer_tick(struct hw *hw, unsigned int ticks)
+{
+ if (ticks)
+ ticks |= TIMR_IE | TIMR_IP;
+ hw_write_20kx(hw, TIMR, ticks);
+ return 0;
+}
+
+static unsigned int get_wc(struct hw *hw)
+{
+ return hw_read_20kx(hw, WC);
+}
+
/* Card hardware initialization block */
struct dac_conf {
unsigned int msr; /* master sample rate in rsrs */
return 0;
}
+static irqreturn_t ct_20k2_interrupt(int irq, void *dev_id)
+{
+ struct hw *hw = dev_id;
+ unsigned int status;
+
+ status = hw_read_20kx(hw, GIP);
+ if (!status)
+ return IRQ_NONE;
+
+ if (hw->irq_callback)
+ hw->irq_callback(hw->irq_callback_data, status);
+
+ hw_write_20kx(hw, GIP, status);
+ return IRQ_HANDLED;
+}
+
static int hw_card_start(struct hw *hw)
{
int err = 0;
hw->io_base = pci_resource_start(hw->pci, 2);
hw->mem_base = (unsigned long)ioremap(hw->io_base,
pci_resource_len(hw->pci, 2));
- if (NULL == (void *)hw->mem_base) {
+ if (!hw->mem_base) {
err = -ENOENT;
goto error2;
}
set_field(&gctl, GCTL_UAA, 0);
hw_write_20kx(hw, GLOBAL_CNTL_GCTL, gctl);
- /*if ((err = request_irq(pci->irq, ct_atc_interrupt, IRQF_SHARED,
- atc->chip_details->nm_card, hw))) {
- goto error3;
+ if (hw->irq < 0) {
+ err = request_irq(pci->irq, ct_20k2_interrupt, IRQF_SHARED,
+ "ctxfi", hw);
+ if (err < 0) {
+ printk(KERN_ERR "XFi: Cannot get irq %d\n", pci->irq);
+ goto error2;
+ }
+ hw->irq = pci->irq;
}
- hw->irq = pci->irq;
- */
pci_set_master(pci);
hw->irq = -1;
- if (NULL != ((void *)hw->mem_base))
+ if (hw->mem_base)
iounmap((void *)hw->mem_base);
hw->mem_base = (unsigned long)NULL;
hw_write_20kx(hw, GLOBAL_CNTL_GCTL, gctl);
/* Reset all global pending interrupts */
- hw_write_20kx(hw, INTERRUPT_GIE, 0);
+ hw_write_20kx(hw, GIE, 0);
/* Reset all SRC pending interrupts */
hw_write_20kx(hw, SRC_IP, 0);
.daio_mgr_set_imapnxt = daio_mgr_set_imapnxt,
.daio_mgr_set_imapaddr = daio_mgr_set_imapaddr,
.daio_mgr_commit_write = daio_mgr_commit_write,
+
+ .set_timer_irq = set_timer_irq,
+ .set_timer_tick = set_timer_tick,
+ .get_wc = get_wc,
};
int __devinit create_20k2_hw_obj(struct hw **rhw)
int err;
kctl = snd_ctl_new1(new, mixer->atc);
- if (NULL == kctl)
+ if (!kctl)
return -ENOMEM;
if (SNDRV_CTL_ELEM_IFACE_PCM == kctl->id.iface)
*rmixer = NULL;
/* Allocate mem for mixer obj */
mixer = kzalloc(sizeof(*mixer), GFP_KERNEL);
- if (NULL == mixer)
+ if (!mixer)
return -ENOMEM;
mixer->amixers = kzalloc(sizeof(void *)*(NUM_CT_AMIXERS*CHN_NUM),
GFP_KERNEL);
- if (NULL == mixer->amixers) {
+ if (!mixer->amixers) {
err = -ENOMEM;
goto error1;
}
mixer->sums = kzalloc(sizeof(void *)*(NUM_CT_SUMS*CHN_NUM), GFP_KERNEL);
- if (NULL == mixer->sums) {
+ if (!mixer->sums) {
err = -ENOMEM;
goto error2;
}
{
struct ct_atc_pcm *apcm = atc_pcm;
- if (NULL == apcm->substream)
+ if (!apcm->substream)
return;
snd_pcm_period_elapsed(apcm->substream);
int err;
apcm = kzalloc(sizeof(*apcm), GFP_KERNEL);
- if (NULL == apcm)
+ if (!apcm)
return -ENOMEM;
apcm->substream = substream;
int err;
apcm = kzalloc(sizeof(*apcm), GFP_KERNEL);
- if (NULL == apcm)
+ if (!apcm)
return -ENOMEM;
apcm->started = 0;
rsc->msr = msr;
rsc->hw = hw;
rsc->ops = &rsc_generic_ops;
- if (NULL == hw) {
+ if (!hw) {
rsc->ctrl_blk = NULL;
return 0;
}
mgr->type = NUM_RSCTYP;
mgr->rscs = kzalloc(((amount + 8 - 1) / 8), GFP_KERNEL);
- if (NULL == mgr->rscs)
+ if (!mgr->rscs)
return -ENOMEM;
switch (type) {
else
src = kzalloc(sizeof(*src), GFP_KERNEL);
- if (NULL == src) {
+ if (!src) {
err = -ENOMEM;
goto error1;
}
*rsrc_mgr = NULL;
src_mgr = kzalloc(sizeof(*src_mgr), GFP_KERNEL);
- if (NULL == src_mgr)
+ if (!src_mgr)
return -ENOMEM;
err = rsc_mgr_init(&src_mgr->mgr, SRC, SRC_RESOURCE_NUM, hw);
/* Reserve memory for imapper nodes */
srcimp->imappers = kzalloc(sizeof(struct imapper)*desc->msr,
GFP_KERNEL);
- if (NULL == srcimp->imappers) {
+ if (!srcimp->imappers) {
err = -ENOMEM;
goto error1;
}
/* Allocate mem for SRCIMP resource */
srcimp = kzalloc(sizeof(*srcimp), GFP_KERNEL);
- if (NULL == srcimp) {
- err = -ENOMEM;
- return err;
- }
+ if (!srcimp)
+ return -ENOMEM;
/* Check whether there are sufficient SRCIMP resources. */
+ err = 0;
spin_lock_irqsave(&mgr->mgr_lock, flags);
for (i = 0; i < desc->msr; i++) {
err = mgr_get_resource(&mgr->mgr, 1, &idx);
*rsrcimp_mgr = NULL;
srcimp_mgr = kzalloc(sizeof(*srcimp_mgr), GFP_KERNEL);
- if (NULL == srcimp_mgr)
+ if (!srcimp_mgr)
return -ENOMEM;
err = rsc_mgr_init(&srcimp_mgr->mgr, SRCIMP, SRCIMP_RESOURCE_NUM, hw);
spin_lock_init(&srcimp_mgr->imap_lock);
INIT_LIST_HEAD(&srcimp_mgr->imappers);
entry = kzalloc(sizeof(*entry), GFP_KERNEL);
- if (NULL == entry) {
+ if (!entry) {
err = -ENOMEM;
goto error2;
}
}
block = kzalloc(sizeof(*block), GFP_KERNEL);
- if (NULL == block)
+ if (!block)
goto out;
block->addr = entry->addr;
*rvm = NULL;
vm = kzalloc(sizeof(*vm), GFP_KERNEL);
- if (NULL == vm)
+ if (!vm)
return -ENOMEM;
mutex_init(&vm->lock);
/* Allocate page table pages */
for (i = 0; i < CT_PTP_NUM; i++) {
vm->ptp[i] = kmalloc(PAGE_SIZE, GFP_KERNEL);
- if (NULL == vm->ptp[i])
+ if (!vm->ptp[i])
break;
}
if (!i) {
Say Y here to enable the jack plugging notification via
input layer.
+config SND_HDA_PATCH_LOADER
+ bool "Support initialization patch loading for HD-audio"
+ depends on EXPERIMENTAL
+ select FW_LOADER
+ select SND_HDA_HWDEP
+ select SND_HDA_RECONFIG
+ help
+ Say Y here to allow the HD-audio driver to load a pseudo
+ firmware file ("patch") for overriding the BIOS setup at
+ start up. The "patch" file can be specified via patch module
+ option, such as patch=hda-init.
+
+ This option turns on hwdep and reconfig features automatically.
+
config SND_HDA_CODEC_REALTEK
bool "Build Realtek HD-audio codec support"
default y
def_bool y
depends on SND_HDA_CODEC_INTELHDMI
+config SND_HDA_CODEC_CIRRUS
+ bool "Build Cirrus Logic codec support"
+ depends on SND_HDA_INTEL
+ default y
+ help
+ Say Y here to include Cirrus Logic codec support in
+ snd-hda-intel driver, such as CS4206.
+
+ When the HD-audio driver is built as a module, the codec
+ support code is also built as another module,
+ snd-hda-codec-cirrus.
+ This module is automatically loaded at probing.
+
config SND_HDA_CODEC_CONEXANT
bool "Build Conexant HD-audio codec support"
default y
snd-hda-codec-idt-objs := patch_sigmatel.o
snd-hda-codec-si3054-objs := patch_si3054.o
snd-hda-codec-atihdmi-objs := patch_atihdmi.o
+snd-hda-codec-cirrus-objs := patch_cirrus.o
snd-hda-codec-ca0110-objs := patch_ca0110.o
snd-hda-codec-conexant-objs := patch_conexant.o
snd-hda-codec-via-objs := patch_via.o
ifdef CONFIG_SND_HDA_CODEC_ATIHDMI
obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-atihdmi.o
endif
+ifdef CONFIG_SND_HDA_CODEC_CIRRUS
+obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-cirrus.o
+endif
ifdef CONFIG_SND_HDA_CODEC_CA0110
obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-ca0110.o
endif
#include <linux/workqueue.h>
#include <sound/core.h>
#include "hda_beep.h"
+#include "hda_local.h"
enum {
DIGBEEP_HZ_STEP = 46875, /* 46.875 Hz */
struct hda_beep *beep;
int err;
+ if (!snd_hda_get_bool_hint(codec, "beep"))
+ return 0; /* disabled explicitly */
+
beep = kzalloc(sizeof(*beep), GFP_KERNEL);
if (beep == NULL)
return -ENOMEM;
/* codec vendor labels */
static struct hda_vendor_id hda_vendor_ids[] = {
{ 0x1002, "ATI" },
+ { 0x1013, "Cirrus Logic" },
{ 0x1057, "Motorola" },
{ 0x1095, "Silicon Image" },
{ 0x10de, "Nvidia" },
{
u32 val;
- val = (u32)(codec->addr & 0x0f) << 28;
+ if ((codec->addr & ~0xf) || (direct & ~1) || (nid & ~0x7f) ||
+ (verb & ~0xfff) || (parm & ~0xffff)) {
+ printk(KERN_ERR "hda-codec: out of range cmd %x:%x:%x:%x:%x\n",
+ codec->addr, direct, nid, verb, parm);
+ return ~0;
+ }
+
+ val = (u32)codec->addr << 28;
val |= (u32)direct << 27;
val |= (u32)nid << 20;
val |= verb << 8;
struct hda_bus *bus = codec->bus;
int err;
+ if (cmd == ~0)
+ return -1;
+
if (res)
*res = -1;
again:
mutex_lock(&bus->cmd_mutex);
err = bus->ops.command(bus, cmd);
if (!err && res)
- *res = bus->ops.get_response(bus);
+ *res = bus->ops.get_response(bus, codec->addr);
mutex_unlock(&bus->cmd_mutex);
snd_hda_power_down(codec);
if (res && *res == -1 && bus->rirb_error) {
unsigned int parm;
int i, conn_len, conns;
unsigned int shift, num_elems, mask;
+ unsigned int wcaps;
hda_nid_t prev_nid;
if (snd_BUG_ON(!conn_list || max_conns <= 0))
return -EINVAL;
+ wcaps = get_wcaps(codec, nid);
+ if (!(wcaps & AC_WCAP_CONN_LIST) &&
+ get_wcaps_type(wcaps) != AC_WID_VOL_KNB) {
+ snd_printk(KERN_WARNING "hda_codec: "
+ "connection list not available for 0x%x\n", nid);
+ return -EINVAL;
+ }
+
parm = snd_hda_param_read(codec, nid, AC_PAR_CONNLIST_LEN);
if (parm & AC_CLIST_LONG) {
/* long form */
/* single connection */
parm = snd_hda_codec_read(codec, nid, 0,
AC_VERB_GET_CONNECT_LIST, 0);
+ if (parm == -1 && codec->bus->rirb_error)
+ return -EIO;
conn_list[0] = parm & mask;
return 1;
}
int range_val;
hda_nid_t val, n;
- if (i % num_elems == 0)
+ if (i % num_elems == 0) {
parm = snd_hda_codec_read(codec, nid, 0,
AC_VERB_GET_CONNECT_LIST, i);
+ if (parm == -1 && codec->bus->rirb_error)
+ return -EIO;
+ }
range_val = !!(parm & (1 << (shift-1))); /* ranges */
val = parm & mask;
+ if (val == 0) {
+ snd_printk(KERN_WARNING "hda_codec: "
+ "invalid CONNECT_LIST verb %x[%i]:%x\n",
+ nid, i, parm);
+ return 0;
+ }
parm >>= shift;
if (range_val) {
/* ranges between the previous and this one */
for (i = 0; i < codec->num_nodes; i++, nid++) {
struct hda_pincfg *pin;
unsigned int wcaps = get_wcaps(codec, nid);
- unsigned int wid_type = (wcaps & AC_WCAP_TYPE) >>
- AC_WCAP_TYPE_SHIFT;
+ unsigned int wid_type = get_wcaps_type(wcaps);
if (wid_type != AC_WID_PIN)
continue;
pin = snd_array_new(&codec->init_pins);
* Returns 0 if successful, or a negative error code.
*/
int /*__devinit*/ snd_hda_codec_new(struct hda_bus *bus, unsigned int codec_addr,
- int do_init, struct hda_codec **codecp)
+ struct hda_codec **codecp)
{
struct hda_codec *codec;
char component[31];
codec->afg ? codec->afg : codec->mfg,
AC_PWRST_D0);
- if (do_init) {
- err = snd_hda_codec_configure(codec);
- if (err < 0)
- goto error;
- }
snd_hda_codec_proc_new(codec);
snd_hda_create_hwdep(codec);
err = init_unsol_queue(codec->bus);
return err;
}
+EXPORT_SYMBOL_HDA(snd_hda_codec_configure);
/**
* snd_hda_codec_setup_stream - set up the codec for streaming
hda_nid_t nid;
int i;
- snd_hda_codec_write(codec, fg, 0, AC_VERB_SET_POWER_STATE,
+ /* this delay seems necessary to avoid click noise at power-down */
+ if (power_state == AC_PWRST_D3)
+ msleep(100);
+ snd_hda_codec_read(codec, fg, 0, AC_VERB_SET_POWER_STATE,
power_state);
- msleep(10); /* partial workaround for "azx_get_response timeout" */
+ /* partial workaround for "azx_get_response timeout" */
+ if (power_state == AC_PWRST_D0)
+ msleep(10);
nid = codec->start_nid;
for (i = 0; i < codec->num_nodes; i++, nid++) {
unsigned int wcaps = get_wcaps(codec, nid);
if (wcaps & AC_WCAP_POWER) {
- unsigned int wid_type = (wcaps & AC_WCAP_TYPE) >>
- AC_WCAP_TYPE_SHIFT;
+ unsigned int wid_type = get_wcaps_type(wcaps);
if (power_state == AC_PWRST_D3 &&
wid_type == AC_WID_PIN) {
unsigned int pincap;
case 20:
case 24:
case 32:
- if (maxbps >= 32)
+ if (maxbps >= 32 || format == SNDRV_PCM_FORMAT_FLOAT_LE)
val |= 0x40;
else if (maxbps >= 24)
val |= 0x30;
bps = 20;
}
}
- else if (streams == AC_SUPFMT_FLOAT32) {
- /* should be exclusive */
+ if (streams & AC_SUPFMT_FLOAT32) {
formats |= SNDRV_PCM_FMTBIT_FLOAT_LE;
- bps = 32;
- } else if (streams == AC_SUPFMT_AC3) {
+ if (!bps)
+ bps = 32;
+ }
+ if (streams == AC_SUPFMT_AC3) {
/* should be exclusive */
/* temporary hack: we have still no proper support
* for the direct AC3 stream...
tbl = q;
if (tbl->value >= 0 && tbl->value < num_configs) {
-#ifdef CONFIG_SND_DEBUG_DETECT
+#ifdef CONFIG_SND_DEBUG_VERBOSE
char tmp[10];
const char *model = NULL;
if (models)
end_nid = codec->start_nid + codec->num_nodes;
for (nid = codec->start_nid; nid < end_nid; nid++) {
unsigned int wid_caps = get_wcaps(codec, nid);
- unsigned int wid_type =
- (wid_caps & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
+ unsigned int wid_type = get_wcaps_type(wid_caps);
unsigned int def_conf;
short assoc, loc;
/* send a single command */
int (*command)(struct hda_bus *bus, unsigned int cmd);
/* get a response from the last command */
- unsigned int (*get_response)(struct hda_bus *bus);
+ unsigned int (*get_response)(struct hda_bus *bus, unsigned int addr);
/* free the private data */
void (*private_free)(struct hda_bus *);
/* attach a PCM stream */
int snd_hda_bus_new(struct snd_card *card, const struct hda_bus_template *temp,
struct hda_bus **busp);
int snd_hda_codec_new(struct hda_bus *bus, unsigned int codec_addr,
- int do_init, struct hda_codec **codecp);
+ struct hda_codec **codecp);
+int snd_hda_codec_configure(struct hda_codec *codec);
/*
* low level functions
#define snd_hda_codec_needs_resume(codec) 1
#endif
+#ifdef CONFIG_SND_HDA_PATCH_LOADER
+/*
+ * patch firmware
+ */
+int snd_hda_load_patch(struct hda_bus *bus, const char *patch);
+#endif
+
/*
* Codec modularization
*/
char name[64];
char *sname;
long long val;
- int n;
+ unsigned int n;
while (!snd_info_get_line(buffer, line, sizeof(line))) {
if (sscanf(line, "%s %llx", name, &val) != 2)
sname++;
n = 10 * n + name[4] - '0';
}
- if (n < 0 || n > 31) /* double the CEA limit */
+ if (n >= ELD_MAX_SAD)
continue;
if (!strcmp(sname, "_coding_type"))
e->sad[n].format = val;
if (node == NULL)
return -ENOMEM;
node->nid = nid;
- nconns = snd_hda_get_connections(codec, nid, conn_list,
- HDA_MAX_CONNECTIONS);
- if (nconns < 0) {
- kfree(node);
- return nconns;
+ node->wid_caps = get_wcaps(codec, nid);
+ node->type = get_wcaps_type(node->wid_caps);
+ if (node->wid_caps & AC_WCAP_CONN_LIST) {
+ nconns = snd_hda_get_connections(codec, nid, conn_list,
+ HDA_MAX_CONNECTIONS);
+ if (nconns < 0) {
+ kfree(node);
+ return nconns;
+ }
+ } else {
+ nconns = 0;
}
if (nconns <= ARRAY_SIZE(node->slist))
node->conn_list = node->slist;
}
memcpy(node->conn_list, conn_list, nconns * sizeof(hda_nid_t));
node->nconns = nconns;
- node->wid_caps = get_wcaps(codec, nid);
- node->type = (node->wid_caps & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
if (node->type == AC_WID_PIN) {
node->pin_caps = snd_hda_query_pin_caps(codec, node->nid);
#include <linux/compat.h>
#include <linux/mutex.h>
#include <linux/ctype.h>
+#include <linux/firmware.h>
#include <sound/core.h>
#include "hda_codec.h"
#include "hda_local.h"
return len;
}
-static ssize_t init_verbs_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
+static int parse_init_verbs(struct hda_codec *codec, const char *buf)
{
- struct snd_hwdep *hwdep = dev_get_drvdata(dev);
- struct hda_codec *codec = hwdep->private_data;
struct hda_verb *v;
int nid, verb, param;
v->nid = nid;
v->verb = verb;
v->param = param;
+ return 0;
+}
+
+static ssize_t init_verbs_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct snd_hwdep *hwdep = dev_get_drvdata(dev);
+ struct hda_codec *codec = hwdep->private_data;
+ int err = parse_init_verbs(codec, buf);
+ if (err < 0)
+ return err;
return count;
}
#define MAX_HINTS 1024
-static ssize_t hints_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
+static int parse_hints(struct hda_codec *codec, const char *buf)
{
- struct snd_hwdep *hwdep = dev_get_drvdata(dev);
- struct hda_codec *codec = hwdep->private_data;
char *key, *val;
struct hda_hint *hint;
while (isspace(*buf))
buf++;
if (!*buf || *buf == '#' || *buf == '\n')
- return count;
+ return 0;
if (*buf == '=')
return -EINVAL;
key = kstrndup_noeol(buf, 1024);
kfree(hint->key);
hint->key = key;
hint->val = val;
- return count;
+ return 0;
}
/* allocate a new hint entry */
if (codec->hints.used >= MAX_HINTS)
}
hint->key = key;
hint->val = val;
+ return 0;
+}
+
+static ssize_t hints_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct snd_hwdep *hwdep = dev_get_drvdata(dev);
+ struct hda_codec *codec = hwdep->private_data;
+ int err = parse_hints(codec, buf);
+ if (err < 0)
+ return err;
return count;
}
#define MAX_PIN_CONFIGS 32
-static ssize_t user_pin_configs_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
+static int parse_user_pin_configs(struct hda_codec *codec, const char *buf)
{
- struct snd_hwdep *hwdep = dev_get_drvdata(dev);
- struct hda_codec *codec = hwdep->private_data;
int nid, cfg;
- int err;
if (sscanf(buf, "%i %i", &nid, &cfg) != 2)
return -EINVAL;
if (!nid)
return -EINVAL;
- err = snd_hda_add_pincfg(codec, &codec->user_pins, nid, cfg);
+ return snd_hda_add_pincfg(codec, &codec->user_pins, nid, cfg);
+}
+
+static ssize_t user_pin_configs_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct snd_hwdep *hwdep = dev_get_drvdata(dev);
+ struct hda_codec *codec = hwdep->private_data;
+ int err = parse_user_pin_configs(codec, buf);
if (err < 0)
return err;
return count;
EXPORT_SYMBOL_HDA(snd_hda_get_bool_hint);
#endif /* CONFIG_SND_HDA_RECONFIG */
+
+#ifdef CONFIG_SND_HDA_PATCH_LOADER
+
+/* parser mode */
+enum {
+ LINE_MODE_NONE,
+ LINE_MODE_CODEC,
+ LINE_MODE_MODEL,
+ LINE_MODE_PINCFG,
+ LINE_MODE_VERB,
+ LINE_MODE_HINT,
+ NUM_LINE_MODES,
+};
+
+static inline int strmatch(const char *a, const char *b)
+{
+ return strnicmp(a, b, strlen(b)) == 0;
+}
+
+/* parse the contents after the line "[codec]"
+ * accept only the line with three numbers, and assign the current codec
+ */
+static void parse_codec_mode(char *buf, struct hda_bus *bus,
+ struct hda_codec **codecp)
+{
+ unsigned int vendorid, subid, caddr;
+ struct hda_codec *codec;
+
+ *codecp = NULL;
+ if (sscanf(buf, "%i %i %i", &vendorid, &subid, &caddr) == 3) {
+ list_for_each_entry(codec, &bus->codec_list, list) {
+ if (codec->addr == caddr) {
+ *codecp = codec;
+ break;
+ }
+ }
+ }
+}
+
+/* parse the contents after the other command tags, [pincfg], [verb],
+ * [hint] and [model]
+ * just pass to the sysfs helper (only when any codec was specified)
+ */
+static void parse_pincfg_mode(char *buf, struct hda_bus *bus,
+ struct hda_codec **codecp)
+{
+ if (!*codecp)
+ return;
+ parse_user_pin_configs(*codecp, buf);
+}
+
+static void parse_verb_mode(char *buf, struct hda_bus *bus,
+ struct hda_codec **codecp)
+{
+ if (!*codecp)
+ return;
+ parse_init_verbs(*codecp, buf);
+}
+
+static void parse_hint_mode(char *buf, struct hda_bus *bus,
+ struct hda_codec **codecp)
+{
+ if (!*codecp)
+ return;
+ parse_hints(*codecp, buf);
+}
+
+static void parse_model_mode(char *buf, struct hda_bus *bus,
+ struct hda_codec **codecp)
+{
+ if (!*codecp)
+ return;
+ kfree((*codecp)->modelname);
+ (*codecp)->modelname = kstrdup(buf, GFP_KERNEL);
+}
+
+struct hda_patch_item {
+ const char *tag;
+ void (*parser)(char *buf, struct hda_bus *bus, struct hda_codec **retc);
+};
+
+static struct hda_patch_item patch_items[NUM_LINE_MODES] = {
+ [LINE_MODE_CODEC] = { "[codec]", parse_codec_mode },
+ [LINE_MODE_MODEL] = { "[model]", parse_model_mode },
+ [LINE_MODE_VERB] = { "[verb]", parse_verb_mode },
+ [LINE_MODE_PINCFG] = { "[pincfg]", parse_pincfg_mode },
+ [LINE_MODE_HINT] = { "[hint]", parse_hint_mode },
+};
+
+/* check the line starting with '[' -- change the parser mode accodingly */
+static int parse_line_mode(char *buf, struct hda_bus *bus)
+{
+ int i;
+ for (i = 0; i < ARRAY_SIZE(patch_items); i++) {
+ if (!patch_items[i].tag)
+ continue;
+ if (strmatch(buf, patch_items[i].tag))
+ return i;
+ }
+ return LINE_MODE_NONE;
+}
+
+/* copy one line from the buffer in fw, and update the fields in fw
+ * return zero if it reaches to the end of the buffer, or non-zero
+ * if successfully copied a line
+ *
+ * the spaces at the beginning and the end of the line are stripped
+ */
+static int get_line_from_fw(char *buf, int size, struct firmware *fw)
+{
+ int len;
+ const char *p = fw->data;
+ while (isspace(*p) && fw->size) {
+ p++;
+ fw->size--;
+ }
+ if (!fw->size)
+ return 0;
+ if (size < fw->size)
+ size = fw->size;
+
+ for (len = 0; len < fw->size; len++) {
+ if (!*p)
+ break;
+ if (*p == '\n') {
+ p++;
+ len++;
+ break;
+ }
+ if (len < size)
+ *buf++ = *p++;
+ }
+ *buf = 0;
+ fw->size -= len;
+ fw->data = p;
+ remove_trail_spaces(buf);
+ return 1;
+}
+
+/*
+ * load a "patch" firmware file and parse it
+ */
+int snd_hda_load_patch(struct hda_bus *bus, const char *patch)
+{
+ int err;
+ const struct firmware *fw;
+ struct firmware tmp;
+ char buf[128];
+ struct hda_codec *codec;
+ int line_mode;
+ struct device *dev = bus->card->dev;
+
+ if (snd_BUG_ON(!dev))
+ return -ENODEV;
+ err = request_firmware(&fw, patch, dev);
+ if (err < 0) {
+ printk(KERN_ERR "hda-codec: Cannot load the patch '%s'\n",
+ patch);
+ return err;
+ }
+
+ tmp = *fw;
+ line_mode = LINE_MODE_NONE;
+ codec = NULL;
+ while (get_line_from_fw(buf, sizeof(buf) - 1, &tmp)) {
+ if (!*buf || *buf == '#' || *buf == '\n')
+ continue;
+ if (*buf == '[')
+ line_mode = parse_line_mode(buf, bus);
+ else if (patch_items[line_mode].parser)
+ patch_items[line_mode].parser(buf, bus, &codec);
+ }
+ release_firmware(fw);
+ return 0;
+}
+EXPORT_SYMBOL_HDA(snd_hda_load_patch);
+#endif /* CONFIG_SND_HDA_PATCH_LOADER */
static int probe_only[SNDRV_CARDS];
static int single_cmd;
static int enable_msi;
+#ifdef CONFIG_SND_HDA_PATCH_LOADER
+static char *patch[SNDRV_CARDS];
+#endif
module_param_array(index, int, NULL, 0444);
MODULE_PARM_DESC(index, "Index value for Intel HD audio interface.");
"(for debugging only).");
module_param(enable_msi, int, 0444);
MODULE_PARM_DESC(enable_msi, "Enable Message Signaled Interrupt (MSI)");
+#ifdef CONFIG_SND_HDA_PATCH_LOADER
+module_param_array(patch, charp, NULL, 0444);
+MODULE_PARM_DESC(patch, "Patch file for Intel HD audio interface.");
+#endif
#ifdef CONFIG_SND_HDA_POWER_SAVE
static int power_save = CONFIG_SND_HDA_POWER_SAVE_DEFAULT;
/* STATESTS int mask: S3,SD2,SD1,SD0 */
#define AZX_MAX_CODECS 4
-#define STATESTS_INT_MASK 0x0f
+#define STATESTS_INT_MASK ((1 << AZX_MAX_CODECS) - 1)
/* SD_CTL bits */
#define SD_CTL_STREAM_RESET 0x01 /* stream reset bit */
dma_addr_t addr; /* physical address of CORB/RIRB buffer */
/* for RIRB */
unsigned short rp, wp; /* read/write pointers */
- int cmds; /* number of pending requests */
- u32 res; /* last read value */
+ int cmds[AZX_MAX_CODECS]; /* number of pending requests */
+ u32 res[AZX_MAX_CODECS]; /* last read value */
};
struct azx {
unsigned int probing :1; /* codec probing phase */
/* for debugging */
- unsigned int last_cmd; /* last issued command (to sync) */
+ unsigned int last_cmd[AZX_MAX_CODECS];
/* for pending irqs */
struct work_struct irq_pending_work;
static void azx_init_cmd_io(struct azx *chip)
{
+ spin_lock_irq(&chip->reg_lock);
/* CORB set up */
chip->corb.addr = chip->rb.addr;
chip->corb.buf = (u32 *)chip->rb.area;
/* RIRB set up */
chip->rirb.addr = chip->rb.addr + 2048;
chip->rirb.buf = (u32 *)(chip->rb.area + 2048);
- chip->rirb.wp = chip->rirb.rp = chip->rirb.cmds = 0;
+ chip->rirb.wp = chip->rirb.rp = 0;
+ memset(chip->rirb.cmds, 0, sizeof(chip->rirb.cmds));
azx_writel(chip, RIRBLBASE, (u32)chip->rirb.addr);
azx_writel(chip, RIRBUBASE, upper_32_bits(chip->rirb.addr));
azx_writew(chip, RINTCNT, 1);
/* enable rirb dma and response irq */
azx_writeb(chip, RIRBCTL, ICH6_RBCTL_DMA_EN | ICH6_RBCTL_IRQ_EN);
+ spin_unlock_irq(&chip->reg_lock);
}
static void azx_free_cmd_io(struct azx *chip)
{
+ spin_lock_irq(&chip->reg_lock);
/* disable ringbuffer DMAs */
azx_writeb(chip, RIRBCTL, 0);
azx_writeb(chip, CORBCTL, 0);
+ spin_unlock_irq(&chip->reg_lock);
+}
+
+static unsigned int azx_command_addr(u32 cmd)
+{
+ unsigned int addr = cmd >> 28;
+
+ if (addr >= AZX_MAX_CODECS) {
+ snd_BUG();
+ addr = 0;
+ }
+
+ return addr;
+}
+
+static unsigned int azx_response_addr(u32 res)
+{
+ unsigned int addr = res & 0xf;
+
+ if (addr >= AZX_MAX_CODECS) {
+ snd_BUG();
+ addr = 0;
+ }
+
+ return addr;
}
/* send a command */
static int azx_corb_send_cmd(struct hda_bus *bus, u32 val)
{
struct azx *chip = bus->private_data;
+ unsigned int addr = azx_command_addr(val);
unsigned int wp;
+ spin_lock_irq(&chip->reg_lock);
+
/* add command to corb */
wp = azx_readb(chip, CORBWP);
wp++;
wp %= ICH6_MAX_CORB_ENTRIES;
- spin_lock_irq(&chip->reg_lock);
- chip->rirb.cmds++;
+ chip->rirb.cmds[addr]++;
chip->corb.buf[wp] = cpu_to_le32(val);
azx_writel(chip, CORBWP, wp);
+
spin_unlock_irq(&chip->reg_lock);
return 0;
static void azx_update_rirb(struct azx *chip)
{
unsigned int rp, wp;
+ unsigned int addr;
u32 res, res_ex;
wp = azx_readb(chip, RIRBWP);
if (wp == chip->rirb.wp)
return;
chip->rirb.wp = wp;
-
+
while (chip->rirb.rp != wp) {
chip->rirb.rp++;
chip->rirb.rp %= ICH6_MAX_RIRB_ENTRIES;
rp = chip->rirb.rp << 1; /* an RIRB entry is 8-bytes */
res_ex = le32_to_cpu(chip->rirb.buf[rp + 1]);
res = le32_to_cpu(chip->rirb.buf[rp]);
+ addr = azx_response_addr(res_ex);
if (res_ex & ICH6_RIRB_EX_UNSOL_EV)
snd_hda_queue_unsol_event(chip->bus, res, res_ex);
- else if (chip->rirb.cmds) {
- chip->rirb.res = res;
+ else if (chip->rirb.cmds[addr]) {
+ chip->rirb.res[addr] = res;
smp_wmb();
- chip->rirb.cmds--;
- }
+ chip->rirb.cmds[addr]--;
+ } else
+ snd_printk(KERN_ERR SFX "spurious response %#x:%#x, "
+ "last cmd=%#08x\n",
+ res, res_ex,
+ chip->last_cmd[addr]);
}
}
/* receive a response */
-static unsigned int azx_rirb_get_response(struct hda_bus *bus)
+static unsigned int azx_rirb_get_response(struct hda_bus *bus,
+ unsigned int addr)
{
struct azx *chip = bus->private_data;
unsigned long timeout;
azx_update_rirb(chip);
spin_unlock_irq(&chip->reg_lock);
}
- if (!chip->rirb.cmds) {
+ if (!chip->rirb.cmds[addr]) {
smp_rmb();
bus->rirb_error = 0;
- return chip->rirb.res; /* the last value */
+ return chip->rirb.res[addr]; /* the last value */
}
if (time_after(jiffies, timeout))
break;
if (chip->msi) {
snd_printk(KERN_WARNING SFX "No response from codec, "
- "disabling MSI: last cmd=0x%08x\n", chip->last_cmd);
+ "disabling MSI: last cmd=0x%08x\n",
+ chip->last_cmd[addr]);
free_irq(chip->irq, chip);
chip->irq = -1;
pci_disable_msi(chip->pci);
if (!chip->polling_mode) {
snd_printk(KERN_WARNING SFX "azx_get_response timeout, "
"switching to polling mode: last cmd=0x%08x\n",
- chip->last_cmd);
+ chip->last_cmd[addr]);
chip->polling_mode = 1;
goto again;
}
snd_printk(KERN_ERR "hda_intel: azx_get_response timeout, "
"switching to single_cmd mode: last cmd=0x%08x\n",
- chip->last_cmd);
+ chip->last_cmd[addr]);
chip->single_cmd = 1;
bus->response_reset = 0;
/* re-initialize CORB/RIRB */
*/
/* receive a response */
-static int azx_single_wait_for_response(struct azx *chip)
+static int azx_single_wait_for_response(struct azx *chip, unsigned int addr)
{
int timeout = 50;
/* check IRV busy bit */
if (azx_readw(chip, IRS) & ICH6_IRS_VALID) {
/* reuse rirb.res as the response return value */
- chip->rirb.res = azx_readl(chip, IR);
+ chip->rirb.res[addr] = azx_readl(chip, IR);
return 0;
}
udelay(1);
if (printk_ratelimit())
snd_printd(SFX "get_response timeout: IRS=0x%x\n",
azx_readw(chip, IRS));
- chip->rirb.res = -1;
+ chip->rirb.res[addr] = -1;
return -EIO;
}
static int azx_single_send_cmd(struct hda_bus *bus, u32 val)
{
struct azx *chip = bus->private_data;
+ unsigned int addr = azx_command_addr(val);
int timeout = 50;
bus->rirb_error = 0;
azx_writel(chip, IC, val);
azx_writew(chip, IRS, azx_readw(chip, IRS) |
ICH6_IRS_BUSY);
- return azx_single_wait_for_response(chip);
+ return azx_single_wait_for_response(chip, addr);
}
udelay(1);
}
}
/* receive a response */
-static unsigned int azx_single_get_response(struct hda_bus *bus)
+static unsigned int azx_single_get_response(struct hda_bus *bus,
+ unsigned int addr)
{
struct azx *chip = bus->private_data;
- return chip->rirb.res;
+ return chip->rirb.res[addr];
}
/*
{
struct azx *chip = bus->private_data;
- chip->last_cmd = val;
+ chip->last_cmd[azx_command_addr(val)] = val;
if (chip->single_cmd)
return azx_single_send_cmd(bus, val);
else
}
/* get a response */
-static unsigned int azx_get_response(struct hda_bus *bus)
+static unsigned int azx_get_response(struct hda_bus *bus,
+ unsigned int addr)
{
struct azx *chip = bus->private_data;
if (chip->single_cmd)
- return azx_single_get_response(bus);
+ return azx_single_get_response(bus, addr);
else
- return azx_rirb_get_response(bus);
+ return azx_rirb_get_response(bus, addr);
}
#ifdef CONFIG_SND_HDA_POWER_SAVE
(AC_VERB_PARAMETERS << 8) | AC_PAR_VENDOR_ID;
unsigned int res;
+ mutex_lock(&chip->bus->cmd_mutex);
chip->probing = 1;
azx_send_cmd(chip->bus, cmd);
- res = azx_get_response(chip->bus);
+ res = azx_get_response(chip->bus, addr);
chip->probing = 0;
+ mutex_unlock(&chip->bus->cmd_mutex);
if (res == -1)
return -EIO;
snd_printdd(SFX "codec #%d probed OK\n", addr);
[AZX_DRIVER_TERA] = 1,
};
-static int __devinit azx_codec_create(struct azx *chip, const char *model,
- int no_init)
+static int __devinit azx_codec_create(struct azx *chip, const char *model)
{
struct hda_bus_template bus_temp;
int c, codecs, err;
for (c = 0; c < max_slots; c++) {
if ((chip->codec_mask & (1 << c)) & chip->codec_probe_mask) {
struct hda_codec *codec;
- err = snd_hda_codec_new(chip->bus, c, !no_init, &codec);
+ err = snd_hda_codec_new(chip->bus, c, &codec);
if (err < 0)
continue;
codecs++;
snd_printk(KERN_ERR SFX "no codecs initialized\n");
return -ENXIO;
}
+ return 0;
+}
+/* configure each codec instance */
+static int __devinit azx_codec_configure(struct azx *chip)
+{
+ struct hda_codec *codec;
+ list_for_each_entry(codec, &chip->bus->codec_list, list) {
+ snd_hda_codec_configure(codec);
+ }
return 0;
}
}
}
+/*
+ * white-list for enable_msi
+ */
+static struct snd_pci_quirk msi_white_list[] __devinitdata = {
+ SND_PCI_QUIRK(0x103c, 0x3607, "HP Compa CQ40", 1),
+ {}
+};
+
+static void __devinit check_msi(struct azx *chip)
+{
+ const struct snd_pci_quirk *q;
+
+ chip->msi = enable_msi;
+ if (chip->msi)
+ return;
+ q = snd_pci_quirk_lookup(chip->pci, msi_white_list);
+ if (q) {
+ printk(KERN_INFO
+ "hda_intel: msi for device %04x:%04x set to %d\n",
+ q->subvendor, q->subdevice, q->value);
+ chip->msi = q->value;
+ }
+}
+
/*
* constructor
chip->pci = pci;
chip->irq = -1;
chip->driver_type = driver_type;
- chip->msi = enable_msi;
+ check_msi(chip);
chip->dev_index = dev;
INIT_WORK(&chip->irq_pending_work, azx_irq_pending_work);
return err;
}
+ /* set this here since it's referred in snd_hda_load_patch() */
+ snd_card_set_dev(card, &pci->dev);
+
err = azx_create(card, pci, dev, pci_id->driver_data, &chip);
if (err < 0)
goto out_free;
card->private_data = chip;
/* create codec instances */
- err = azx_codec_create(chip, model[dev], probe_only[dev]);
+ err = azx_codec_create(chip, model[dev]);
if (err < 0)
goto out_free;
+#ifdef CONFIG_SND_HDA_PATCH_LOADER
+ if (patch[dev]) {
+ snd_printk(KERN_ERR SFX "Applying patch firmware '%s'\n",
+ patch[dev]);
+ err = snd_hda_load_patch(chip->bus, patch[dev]);
+ if (err < 0)
+ goto out_free;
+ }
+#endif
+ if (!probe_only[dev]) {
+ err = azx_codec_configure(chip);
+ if (err < 0)
+ goto out_free;
+ }
/* create PCM streams */
err = snd_hda_build_pcms(chip->bus);
if (err < 0)
goto out_free;
- snd_card_set_dev(card, &pci->dev);
-
err = snd_card_register(card);
if (err < 0)
goto out_free;
/* this entry seems still valid -- i.e. without emu20kx chip */
{ PCI_DEVICE(0x1102, 0x0009), .driver_data = AZX_DRIVER_GENERIC },
#endif
- /* AMD Generic, PCI class code and Vendor ID for HD Audio */
+ /* AMD/ATI Generic, PCI class code and Vendor ID for HD Audio */
{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_ANY_ID),
.class = PCI_CLASS_MULTIMEDIA_HD_AUDIO << 8,
.class_mask = 0xffffff,
.driver_data = AZX_DRIVER_GENERIC },
+ { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_ANY_ID),
+ .class = PCI_CLASS_MULTIMEDIA_HD_AUDIO << 8,
+ .class_mask = 0xffffff,
+ .driver_data = AZX_DRIVER_GENERIC },
{ 0, }
};
MODULE_DEVICE_TABLE(pci, azx_ids);
int snd_hda_add_vmaster(struct hda_codec *codec, char *name,
unsigned int *tlv, const char **slaves);
int snd_hda_codec_reset(struct hda_codec *codec);
-int snd_hda_codec_configure(struct hda_codec *codec);
/* amp value bits */
#define HDA_AMP_MUTE 0x80
return codec->wcaps[nid - codec->start_nid];
}
+/* get the widget type from widget capability bits */
+#define get_wcaps_type(wcaps) (((wcaps) & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT)
+
+static inline unsigned int get_wcaps_channels(u32 wcaps)
+{
+ unsigned int chans;
+
+ chans = (wcaps & AC_WCAP_CHAN_CNT_EXT) >> 13;
+ chans = ((chans << 1) | 1) + 1;
+
+ return chans;
+}
+
u32 query_amp_caps(struct hda_codec *codec, hda_nid_t nid, int direction);
int snd_hda_override_amp_caps(struct hda_codec *codec, hda_nid_t nid, int dir,
unsigned int caps);
unsigned int wid_caps =
snd_hda_param_read(codec, nid,
AC_PAR_AUDIO_WIDGET_CAP);
- unsigned int wid_type =
- (wid_caps & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
+ unsigned int wid_type = get_wcaps_type(wid_caps);
hda_nid_t conn[HDA_MAX_CONNECTIONS];
int conn_len = 0;
snd_iprintf(buffer, "Node 0x%02x [%s] wcaps 0x%x:", nid,
get_wid_type_name(wid_type), wid_caps);
if (wid_caps & AC_WCAP_STEREO) {
- unsigned int chans;
- chans = (wid_caps & AC_WCAP_CHAN_CNT_EXT) >> 13;
- chans = ((chans << 1) | 1) + 1;
+ unsigned int chans = get_wcaps_channels(wid_caps);
if (chans == 2)
snd_iprintf(buffer, " Stereo");
else
board_config = snd_hda_check_board_config(codec, AD1988_MODEL_LAST,
ad1988_models, ad1988_cfg_tbl);
if (board_config < 0) {
- printk(KERN_INFO "hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...\n");
+ printk(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
+ codec->chip_name);
board_config = AD1988_AUTO;
}
* Port F: Internal speakers
*/
-static struct hda_input_mux ad1884a_laptop_capture_source = {
- .num_items = 4,
- .items = {
- { "Mic", 0x0 }, /* port-B */
- { "Internal Mic", 0x1 }, /* port-C */
- { "Dock Mic", 0x4 }, /* port-E */
- { "Mix", 0x3 },
- },
-};
+static int ad1884a_mobile_master_sw_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ int ret = snd_hda_mixer_amp_switch_put(kcontrol, ucontrol);
+ int mute = (!ucontrol->value.integer.value[0] &&
+ !ucontrol->value.integer.value[1]);
+ /* toggle GPIO1 according to the mute state */
+ snd_hda_codec_write_cache(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA,
+ mute ? 0x02 : 0x0);
+ return ret;
+}
static struct snd_kcontrol_new ad1884a_laptop_mixers[] = {
HDA_CODEC_VOLUME("Master Playback Volume", 0x21, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Master Playback Switch", 0x21, 0x0, HDA_OUTPUT),
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Master Playback Switch",
+ .info = snd_hda_mixer_amp_switch_info,
+ .get = snd_hda_mixer_amp_switch_get,
+ .put = ad1884a_mobile_master_sw_put,
+ .private_value = HDA_COMPOSE_AMP_VAL(0x21, 3, 0, HDA_OUTPUT),
+ },
HDA_CODEC_MUTE("Dock Playback Switch", 0x12, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("PCM Playback Volume", 0x20, 0x5, HDA_INPUT),
HDA_CODEC_MUTE("PCM Playback Switch", 0x20, 0x5, HDA_INPUT),
HDA_CODEC_VOLUME("Dock Mic Boost", 0x25, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("Capture Volume", 0x0c, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Capture Switch", 0x0c, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x0d, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x0d, 0x0, HDA_OUTPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* The multiple "Capture Source" controls confuse alsamixer
- * So call somewhat different..
- */
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 2,
- .info = ad198x_mux_enum_info,
- .get = ad198x_mux_enum_get,
- .put = ad198x_mux_enum_put,
- },
{ } /* end */
};
-static int ad1884a_mobile_master_sw_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
- int ret = snd_hda_mixer_amp_switch_put(kcontrol, ucontrol);
- int mute = (!ucontrol->value.integer.value[0] &&
- !ucontrol->value.integer.value[1]);
- /* toggle GPIO1 according to the mute state */
- snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA,
- mute ? 0x02 : 0x0);
- return ret;
-}
-
static struct snd_kcontrol_new ad1884a_mobile_mixers[] = {
HDA_CODEC_VOLUME("Master Playback Volume", 0x21, 0x0, HDA_OUTPUT),
/*HDA_CODEC_MUTE("Master Playback Switch", 0x21, 0x0, HDA_OUTPUT),*/
return 0;
}
+/* mute internal speaker if HP or docking HP is plugged */
+static void ad1884a_laptop_automute(struct hda_codec *codec)
+{
+ unsigned int present;
+
+ present = snd_hda_codec_read(codec, 0x11, 0, AC_VERB_GET_PIN_SENSE, 0);
+ present &= AC_PINSENSE_PRESENCE;
+ if (!present) {
+ present = snd_hda_codec_read(codec, 0x12, 0,
+ AC_VERB_GET_PIN_SENSE, 0);
+ present &= AC_PINSENSE_PRESENCE;
+ }
+ snd_hda_codec_amp_stereo(codec, 0x16, HDA_OUTPUT, 0,
+ HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
+ snd_hda_codec_write(codec, 0x16, 0, AC_VERB_SET_EAPD_BTLENABLE,
+ present ? 0x00 : 0x02);
+}
+
+/* switch to external mic if plugged */
+static void ad1884a_laptop_automic(struct hda_codec *codec)
+{
+ unsigned int idx;
+
+ if (snd_hda_codec_read(codec, 0x14, 0, AC_VERB_GET_PIN_SENSE, 0) &
+ AC_PINSENSE_PRESENCE)
+ idx = 0;
+ else if (snd_hda_codec_read(codec, 0x1c, 0, AC_VERB_GET_PIN_SENSE, 0) &
+ AC_PINSENSE_PRESENCE)
+ idx = 4;
+ else
+ idx = 1;
+ snd_hda_codec_write(codec, 0x0c, 0, AC_VERB_SET_CONNECT_SEL, idx);
+}
+
+/* unsolicited event for HP jack sensing */
+static void ad1884a_laptop_unsol_event(struct hda_codec *codec,
+ unsigned int res)
+{
+ switch (res >> 26) {
+ case AD1884A_HP_EVENT:
+ ad1884a_laptop_automute(codec);
+ break;
+ case AD1884A_MIC_EVENT:
+ ad1884a_laptop_automic(codec);
+ break;
+ }
+}
+
+/* initialize jack-sensing, too */
+static int ad1884a_laptop_init(struct hda_codec *codec)
+{
+ ad198x_init(codec);
+ ad1884a_laptop_automute(codec);
+ ad1884a_laptop_automic(codec);
+ return 0;
+}
+
/* additional verbs for laptop model */
static struct hda_verb ad1884a_laptop_verbs[] = {
/* Port-A (HP) pin - always unmuted */
/* Port-F (int speaker) mixer - route only from analog mixer */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- /* Port-F pin */
- {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ /* Port-F (int speaker) pin */
+ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* required for compaq 6530s/6531s speaker output */
+ {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
/* Port-C pin - internal mic-in */
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x7002}, /* raise mic as default */
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x7002}, /* raise mic as default */
+ /* Port-D (docking line-out) pin - default unmuted */
+ {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* analog mix */
{0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
/* unsolicited event for pin-sense */
{0x11, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_HP_EVENT},
+ {0x12, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_HP_EVENT},
{0x14, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_MIC_EVENT},
+ {0x1c, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_MIC_EVENT},
+ /* allow to touch GPIO1 (for mute control) */
+ {0x01, AC_VERB_SET_GPIO_MASK, 0x02},
+ {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x02},
+ {0x01, AC_VERB_SET_GPIO_DATA, 0x02}, /* first muted */
{ } /* end */
};
SND_PCI_QUIRK_MASK(0x103c, 0xfff0, 0x30d0, "HP laptop", AD1884A_LAPTOP),
SND_PCI_QUIRK_MASK(0x103c, 0xfff0, 0x30e0, "HP laptop", AD1884A_LAPTOP),
SND_PCI_QUIRK_MASK(0x103c, 0xff00, 0x3600, "HP laptop", AD1884A_LAPTOP),
+ SND_PCI_QUIRK_MASK(0x103c, 0xfff0, 0x7010, "HP laptop", AD1884A_MOBILE),
SND_PCI_QUIRK(0x17aa, 0x20ac, "Thinkpad X300", AD1884A_THINKPAD),
{}
};
spec->mixers[0] = ad1884a_laptop_mixers;
spec->init_verbs[spec->num_init_verbs++] = ad1884a_laptop_verbs;
spec->multiout.dig_out_nid = 0;
- spec->input_mux = &ad1884a_laptop_capture_source;
- codec->patch_ops.unsol_event = ad1884a_hp_unsol_event;
- codec->patch_ops.init = ad1884a_hp_init;
+ codec->patch_ops.unsol_event = ad1884a_laptop_unsol_event;
+ codec->patch_ops.init = ad1884a_laptop_init;
/* set the upper-limit for mixer amp to 0dB for avoiding the
* possible damage by overloading
*/
/* FIXME: we must check ELD and change the PCM parameters dynamically
*/
chans = get_wcaps(codec, CVT_NID);
- chans = (chans & AC_WCAP_CHAN_CNT_EXT) >> 13;
- chans = ((chans << 1) | 1) + 1;
+ chans = get_wcaps_channels(chans);
info->stream[SNDRV_PCM_STREAM_PLAYBACK].channels_max = chans;
return 0;
nid = codec->start_nid;
for (i = 0; i < codec->num_nodes; i++, nid++) {
unsigned int wcaps = get_wcaps(codec, nid);
- unsigned int type = (wcaps & AC_WCAP_TYPE) >>
- AC_WCAP_TYPE_SHIFT;
+ unsigned int type = get_wcaps_type(wcaps);
if (type != AC_WID_AUD_IN)
continue;
if (snd_hda_get_connections(codec, nid, &pin, 1) != 1)
--- /dev/null
+/*
+ * HD audio interface patch for Cirrus Logic CS420x chip
+ *
+ * Copyright (c) 2009 Takashi Iwai <tiwai@suse.de>
+ *
+ * This driver is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <sound/core.h>
+#include "hda_codec.h"
+#include "hda_local.h"
+
+/*
+ */
+
+struct cs_spec {
+ int board_config;
+ struct auto_pin_cfg autocfg;
+ struct hda_multi_out multiout;
+ struct snd_kcontrol *vmaster_sw;
+ struct snd_kcontrol *vmaster_vol;
+
+ hda_nid_t dac_nid[AUTO_CFG_MAX_OUTS];
+ hda_nid_t slave_dig_outs[2];
+
+ unsigned int input_idx[AUTO_PIN_LAST];
+ unsigned int capsrc_idx[AUTO_PIN_LAST];
+ hda_nid_t adc_nid[AUTO_PIN_LAST];
+ unsigned int adc_idx[AUTO_PIN_LAST];
+ unsigned int num_inputs;
+ unsigned int cur_input;
+ unsigned int automic_idx;
+ hda_nid_t cur_adc;
+ unsigned int cur_adc_stream_tag;
+ unsigned int cur_adc_format;
+ hda_nid_t dig_in;
+
+ struct hda_bind_ctls *capture_bind[2];
+
+ unsigned int gpio_mask;
+ unsigned int gpio_dir;
+ unsigned int gpio_data;
+
+ struct hda_pcm pcm_rec[2]; /* PCM information */
+
+ unsigned int hp_detect:1;
+ unsigned int mic_detect:1;
+};
+
+/* available models */
+enum {
+ CS420X_MBP55,
+ CS420X_AUTO,
+ CS420X_MODELS
+};
+
+/* Vendor-specific processing widget */
+#define CS420X_VENDOR_NID 0x11
+#define CS_DIG_OUT1_PIN_NID 0x10
+#define CS_DIG_OUT2_PIN_NID 0x15
+#define CS_DMIC1_PIN_NID 0x12
+#define CS_DMIC2_PIN_NID 0x0e
+
+/* coef indices */
+#define IDX_SPDIF_STAT 0x0000
+#define IDX_SPDIF_CTL 0x0001
+#define IDX_ADC_CFG 0x0002
+/* SZC bitmask, 4 modes below:
+ * 0 = immediate,
+ * 1 = digital immediate, analog zero-cross
+ * 2 = digtail & analog soft-ramp
+ * 3 = digital soft-ramp, analog zero-cross
+ */
+#define CS_COEF_ADC_SZC_MASK (3 << 0)
+#define CS_COEF_ADC_MIC_SZC_MODE (3 << 0) /* SZC setup for mic */
+#define CS_COEF_ADC_LI_SZC_MODE (3 << 0) /* SZC setup for line-in */
+/* PGA mode: 0 = differential, 1 = signle-ended */
+#define CS_COEF_ADC_MIC_PGA_MODE (1 << 5) /* PGA setup for mic */
+#define CS_COEF_ADC_LI_PGA_MODE (1 << 6) /* PGA setup for line-in */
+#define IDX_DAC_CFG 0x0003
+/* SZC bitmask, 4 modes below:
+ * 0 = Immediate
+ * 1 = zero-cross
+ * 2 = soft-ramp
+ * 3 = soft-ramp on zero-cross
+ */
+#define CS_COEF_DAC_HP_SZC_MODE (3 << 0) /* nid 0x02 */
+#define CS_COEF_DAC_LO_SZC_MODE (3 << 2) /* nid 0x03 */
+#define CS_COEF_DAC_SPK_SZC_MODE (3 << 4) /* nid 0x04 */
+
+#define IDX_BEEP_CFG 0x0004
+/* 0x0008 - test reg key */
+/* 0x0009 - 0x0014 -> 12 test regs */
+/* 0x0015 - visibility reg */
+
+
+static inline int cs_vendor_coef_get(struct hda_codec *codec, unsigned int idx)
+{
+ snd_hda_codec_write(codec, CS420X_VENDOR_NID, 0,
+ AC_VERB_SET_COEF_INDEX, idx);
+ return snd_hda_codec_read(codec, CS420X_VENDOR_NID, 0,
+ AC_VERB_GET_PROC_COEF, 0);
+}
+
+static inline void cs_vendor_coef_set(struct hda_codec *codec, unsigned int idx,
+ unsigned int coef)
+{
+ snd_hda_codec_write(codec, CS420X_VENDOR_NID, 0,
+ AC_VERB_SET_COEF_INDEX, idx);
+ snd_hda_codec_write(codec, CS420X_VENDOR_NID, 0,
+ AC_VERB_SET_PROC_COEF, coef);
+}
+
+
+#define HP_EVENT 1
+#define MIC_EVENT 2
+
+/*
+ * PCM callbacks
+ */
+static int cs_playback_pcm_open(struct hda_pcm_stream *hinfo,
+ struct hda_codec *codec,
+ struct snd_pcm_substream *substream)
+{
+ struct cs_spec *spec = codec->spec;
+ return snd_hda_multi_out_analog_open(codec, &spec->multiout, substream,
+ hinfo);
+}
+
+static int cs_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
+ struct hda_codec *codec,
+ unsigned int stream_tag,
+ unsigned int format,
+ struct snd_pcm_substream *substream)
+{
+ struct cs_spec *spec = codec->spec;
+ return snd_hda_multi_out_analog_prepare(codec, &spec->multiout,
+ stream_tag, format, substream);
+}
+
+static int cs_playback_pcm_cleanup(struct hda_pcm_stream *hinfo,
+ struct hda_codec *codec,
+ struct snd_pcm_substream *substream)
+{
+ struct cs_spec *spec = codec->spec;
+ return snd_hda_multi_out_analog_cleanup(codec, &spec->multiout);
+}
+
+/*
+ * Digital out
+ */
+static int cs_dig_playback_pcm_open(struct hda_pcm_stream *hinfo,
+ struct hda_codec *codec,
+ struct snd_pcm_substream *substream)
+{
+ struct cs_spec *spec = codec->spec;
+ return snd_hda_multi_out_dig_open(codec, &spec->multiout);
+}
+
+static int cs_dig_playback_pcm_close(struct hda_pcm_stream *hinfo,
+ struct hda_codec *codec,
+ struct snd_pcm_substream *substream)
+{
+ struct cs_spec *spec = codec->spec;
+ return snd_hda_multi_out_dig_close(codec, &spec->multiout);
+}
+
+static int cs_dig_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
+ struct hda_codec *codec,
+ unsigned int stream_tag,
+ unsigned int format,
+ struct snd_pcm_substream *substream)
+{
+ struct cs_spec *spec = codec->spec;
+ return snd_hda_multi_out_dig_prepare(codec, &spec->multiout, stream_tag,
+ format, substream);
+}
+
+static int cs_dig_playback_pcm_cleanup(struct hda_pcm_stream *hinfo,
+ struct hda_codec *codec,
+ struct snd_pcm_substream *substream)
+{
+ struct cs_spec *spec = codec->spec;
+ return snd_hda_multi_out_dig_cleanup(codec, &spec->multiout);
+}
+
+/*
+ * Analog capture
+ */
+static int cs_capture_pcm_prepare(struct hda_pcm_stream *hinfo,
+ struct hda_codec *codec,
+ unsigned int stream_tag,
+ unsigned int format,
+ struct snd_pcm_substream *substream)
+{
+ struct cs_spec *spec = codec->spec;
+ spec->cur_adc = spec->adc_nid[spec->cur_input];
+ spec->cur_adc_stream_tag = stream_tag;
+ spec->cur_adc_format = format;
+ snd_hda_codec_setup_stream(codec, spec->cur_adc, stream_tag, 0, format);
+ return 0;
+}
+
+static int cs_capture_pcm_cleanup(struct hda_pcm_stream *hinfo,
+ struct hda_codec *codec,
+ struct snd_pcm_substream *substream)
+{
+ struct cs_spec *spec = codec->spec;
+ snd_hda_codec_cleanup_stream(codec, spec->cur_adc);
+ spec->cur_adc = 0;
+ return 0;
+}
+
+/*
+ */
+static struct hda_pcm_stream cs_pcm_analog_playback = {
+ .substreams = 1,
+ .channels_min = 2,
+ .channels_max = 2,
+ .ops = {
+ .open = cs_playback_pcm_open,
+ .prepare = cs_playback_pcm_prepare,
+ .cleanup = cs_playback_pcm_cleanup
+ },
+};
+
+static struct hda_pcm_stream cs_pcm_analog_capture = {
+ .substreams = 1,
+ .channels_min = 2,
+ .channels_max = 2,
+ .ops = {
+ .prepare = cs_capture_pcm_prepare,
+ .cleanup = cs_capture_pcm_cleanup
+ },
+};
+
+static struct hda_pcm_stream cs_pcm_digital_playback = {
+ .substreams = 1,
+ .channels_min = 2,
+ .channels_max = 2,
+ .ops = {
+ .open = cs_dig_playback_pcm_open,
+ .close = cs_dig_playback_pcm_close,
+ .prepare = cs_dig_playback_pcm_prepare,
+ .cleanup = cs_dig_playback_pcm_cleanup
+ },
+};
+
+static struct hda_pcm_stream cs_pcm_digital_capture = {
+ .substreams = 1,
+ .channels_min = 2,
+ .channels_max = 2,
+};
+
+static int cs_build_pcms(struct hda_codec *codec)
+{
+ struct cs_spec *spec = codec->spec;
+ struct hda_pcm *info = spec->pcm_rec;
+
+ codec->pcm_info = info;
+ codec->num_pcms = 0;
+
+ info->name = "Cirrus Analog";
+ info->stream[SNDRV_PCM_STREAM_PLAYBACK] = cs_pcm_analog_playback;
+ info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = spec->dac_nid[0];
+ info->stream[SNDRV_PCM_STREAM_PLAYBACK].channels_max =
+ spec->multiout.max_channels;
+ info->stream[SNDRV_PCM_STREAM_CAPTURE] = cs_pcm_analog_capture;
+ info->stream[SNDRV_PCM_STREAM_CAPTURE].nid =
+ spec->adc_nid[spec->cur_input];
+ codec->num_pcms++;
+
+ if (!spec->multiout.dig_out_nid && !spec->dig_in)
+ return 0;
+
+ info++;
+ info->name = "Cirrus Digital";
+ info->pcm_type = spec->autocfg.dig_out_type[0];
+ if (!info->pcm_type)
+ info->pcm_type = HDA_PCM_TYPE_SPDIF;
+ if (spec->multiout.dig_out_nid) {
+ info->stream[SNDRV_PCM_STREAM_PLAYBACK] =
+ cs_pcm_digital_playback;
+ info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid =
+ spec->multiout.dig_out_nid;
+ }
+ if (spec->dig_in) {
+ info->stream[SNDRV_PCM_STREAM_CAPTURE] =
+ cs_pcm_digital_capture;
+ info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->dig_in;
+ }
+ codec->num_pcms++;
+
+ return 0;
+}
+
+/*
+ * parse codec topology
+ */
+
+static hda_nid_t get_dac(struct hda_codec *codec, hda_nid_t pin)
+{
+ hda_nid_t dac;
+ if (!pin)
+ return 0;
+ if (snd_hda_get_connections(codec, pin, &dac, 1) != 1)
+ return 0;
+ return dac;
+}
+
+static int is_ext_mic(struct hda_codec *codec, unsigned int idx)
+{
+ struct cs_spec *spec = codec->spec;
+ struct auto_pin_cfg *cfg = &spec->autocfg;
+ hda_nid_t pin = cfg->input_pins[idx];
+ unsigned int val = snd_hda_query_pin_caps(codec, pin);
+ if (!(val & AC_PINCAP_PRES_DETECT))
+ return 0;
+ val = snd_hda_codec_get_pincfg(codec, pin);
+ return (get_defcfg_connect(val) == AC_JACK_PORT_COMPLEX);
+}
+
+static hda_nid_t get_adc(struct hda_codec *codec, hda_nid_t pin,
+ unsigned int *idxp)
+{
+ int i;
+ hda_nid_t nid;
+
+ nid = codec->start_nid;
+ for (i = 0; i < codec->num_nodes; i++, nid++) {
+ hda_nid_t pins[2];
+ unsigned int type;
+ int j, nums;
+ type = (get_wcaps(codec, nid) & AC_WCAP_TYPE)
+ >> AC_WCAP_TYPE_SHIFT;
+ if (type != AC_WID_AUD_IN)
+ continue;
+ nums = snd_hda_get_connections(codec, nid, pins,
+ ARRAY_SIZE(pins));
+ if (nums <= 0)
+ continue;
+ for (j = 0; j < nums; j++) {
+ if (pins[j] == pin) {
+ *idxp = j;
+ return nid;
+ }
+ }
+ }
+ return 0;
+}
+
+static int is_active_pin(struct hda_codec *codec, hda_nid_t nid)
+{
+ unsigned int val;
+ val = snd_hda_codec_get_pincfg(codec, nid);
+ return (get_defcfg_connect(val) != AC_JACK_PORT_NONE);
+}
+
+static int parse_output(struct hda_codec *codec)
+{
+ struct cs_spec *spec = codec->spec;
+ struct auto_pin_cfg *cfg = &spec->autocfg;
+ int i, extra_nids;
+ hda_nid_t dac;
+
+ for (i = 0; i < cfg->line_outs; i++) {
+ dac = get_dac(codec, cfg->line_out_pins[i]);
+ if (!dac)
+ break;
+ spec->dac_nid[i] = dac;
+ }
+ spec->multiout.num_dacs = i;
+ spec->multiout.dac_nids = spec->dac_nid;
+ spec->multiout.max_channels = i * 2;
+
+ /* add HP and speakers */
+ extra_nids = 0;
+ for (i = 0; i < cfg->hp_outs; i++) {
+ dac = get_dac(codec, cfg->hp_pins[i]);
+ if (!dac)
+ break;
+ if (!i)
+ spec->multiout.hp_nid = dac;
+ else
+ spec->multiout.extra_out_nid[extra_nids++] = dac;
+ }
+ for (i = 0; i < cfg->speaker_outs; i++) {
+ dac = get_dac(codec, cfg->speaker_pins[i]);
+ if (!dac)
+ break;
+ spec->multiout.extra_out_nid[extra_nids++] = dac;
+ }
+
+ if (cfg->line_out_type == AUTO_PIN_SPEAKER_OUT) {
+ cfg->speaker_outs = cfg->line_outs;
+ memcpy(cfg->speaker_pins, cfg->line_out_pins,
+ sizeof(cfg->speaker_pins));
+ cfg->line_outs = 0;
+ }
+
+ return 0;
+}
+
+static int parse_input(struct hda_codec *codec)
+{
+ struct cs_spec *spec = codec->spec;
+ struct auto_pin_cfg *cfg = &spec->autocfg;
+ int i;
+
+ for (i = 0; i < AUTO_PIN_LAST; i++) {
+ hda_nid_t pin = cfg->input_pins[i];
+ if (!pin)
+ continue;
+ spec->input_idx[spec->num_inputs] = i;
+ spec->capsrc_idx[i] = spec->num_inputs++;
+ spec->cur_input = i;
+ spec->adc_nid[i] = get_adc(codec, pin, &spec->adc_idx[i]);
+ }
+ if (!spec->num_inputs)
+ return 0;
+
+ /* check whether the automatic mic switch is available */
+ if (spec->num_inputs == 2 &&
+ spec->adc_nid[AUTO_PIN_MIC] && spec->adc_nid[AUTO_PIN_FRONT_MIC]) {
+ if (is_ext_mic(codec, cfg->input_pins[AUTO_PIN_FRONT_MIC])) {
+ if (!is_ext_mic(codec, cfg->input_pins[AUTO_PIN_MIC])) {
+ spec->mic_detect = 1;
+ spec->automic_idx = AUTO_PIN_FRONT_MIC;
+ }
+ } else {
+ if (is_ext_mic(codec, cfg->input_pins[AUTO_PIN_MIC])) {
+ spec->mic_detect = 1;
+ spec->automic_idx = AUTO_PIN_MIC;
+ }
+ }
+ }
+ return 0;
+}
+
+
+static int parse_digital_output(struct hda_codec *codec)
+{
+ struct cs_spec *spec = codec->spec;
+ struct auto_pin_cfg *cfg = &spec->autocfg;
+ hda_nid_t nid;
+
+ if (!cfg->dig_outs)
+ return 0;
+ if (snd_hda_get_connections(codec, cfg->dig_out_pins[0], &nid, 1) < 1)
+ return 0;
+ spec->multiout.dig_out_nid = nid;
+ spec->multiout.share_spdif = 1;
+ if (cfg->dig_outs > 1 &&
+ snd_hda_get_connections(codec, cfg->dig_out_pins[1], &nid, 1) > 0) {
+ spec->slave_dig_outs[0] = nid;
+ codec->slave_dig_outs = spec->slave_dig_outs;
+ }
+ return 0;
+}
+
+static int parse_digital_input(struct hda_codec *codec)
+{
+ struct cs_spec *spec = codec->spec;
+ struct auto_pin_cfg *cfg = &spec->autocfg;
+ int idx;
+
+ if (cfg->dig_in_pin)
+ spec->dig_in = get_adc(codec, cfg->dig_in_pin, &idx);
+ return 0;
+}
+
+/*
+ * create mixer controls
+ */
+
+static const char *dir_sfx[2] = { "Playback", "Capture" };
+
+static int add_mute(struct hda_codec *codec, const char *name, int index,
+ unsigned int pval, int dir, struct snd_kcontrol **kctlp)
+{
+ char tmp[44];
+ struct snd_kcontrol_new knew =
+ HDA_CODEC_MUTE_IDX(tmp, index, 0, 0, HDA_OUTPUT);
+ knew.private_value = pval;
+ snprintf(tmp, sizeof(tmp), "%s %s Switch", name, dir_sfx[dir]);
+ *kctlp = snd_ctl_new1(&knew, codec);
+ return snd_hda_ctl_add(codec, *kctlp);
+}
+
+static int add_volume(struct hda_codec *codec, const char *name,
+ int index, unsigned int pval, int dir,
+ struct snd_kcontrol **kctlp)
+{
+ char tmp[32];
+ struct snd_kcontrol_new knew =
+ HDA_CODEC_VOLUME_IDX(tmp, index, 0, 0, HDA_OUTPUT);
+ knew.private_value = pval;
+ snprintf(tmp, sizeof(tmp), "%s %s Volume", name, dir_sfx[dir]);
+ *kctlp = snd_ctl_new1(&knew, codec);
+ return snd_hda_ctl_add(codec, *kctlp);
+}
+
+static void fix_volume_caps(struct hda_codec *codec, hda_nid_t dac)
+{
+ unsigned int caps;
+
+ /* set the upper-limit for mixer amp to 0dB */
+ caps = query_amp_caps(codec, dac, HDA_OUTPUT);
+ caps &= ~(0x7f << AC_AMPCAP_NUM_STEPS_SHIFT);
+ caps |= ((caps >> AC_AMPCAP_OFFSET_SHIFT) & 0x7f)
+ << AC_AMPCAP_NUM_STEPS_SHIFT;
+ snd_hda_override_amp_caps(codec, dac, HDA_OUTPUT, caps);
+}
+
+static int add_vmaster(struct hda_codec *codec, hda_nid_t dac)
+{
+ struct cs_spec *spec = codec->spec;
+ unsigned int tlv[4];
+ int err;
+
+ spec->vmaster_sw =
+ snd_ctl_make_virtual_master("Master Playback Switch", NULL);
+ err = snd_hda_ctl_add(codec, spec->vmaster_sw);
+ if (err < 0)
+ return err;
+
+ snd_hda_set_vmaster_tlv(codec, dac, HDA_OUTPUT, tlv);
+ spec->vmaster_vol =
+ snd_ctl_make_virtual_master("Master Playback Volume", tlv);
+ err = snd_hda_ctl_add(codec, spec->vmaster_vol);
+ if (err < 0)
+ return err;
+ return 0;
+}
+
+static int add_output(struct hda_codec *codec, hda_nid_t dac, int idx,
+ int num_ctls, int type)
+{
+ struct cs_spec *spec = codec->spec;
+ const char *name;
+ int err, index;
+ struct snd_kcontrol *kctl;
+ static char *speakers[] = {
+ "Front Speaker", "Surround Speaker", "Bass Speaker"
+ };
+ static char *line_outs[] = {
+ "Front Line-Out", "Surround Line-Out", "Bass Line-Out"
+ };
+
+ fix_volume_caps(codec, dac);
+ if (!spec->vmaster_sw) {
+ err = add_vmaster(codec, dac);
+ if (err < 0)
+ return err;
+ }
+
+ index = 0;
+ switch (type) {
+ case AUTO_PIN_HP_OUT:
+ name = "Headphone";
+ index = idx;
+ break;
+ case AUTO_PIN_SPEAKER_OUT:
+ if (num_ctls > 1)
+ name = speakers[idx];
+ else
+ name = "Speaker";
+ break;
+ default:
+ if (num_ctls > 1)
+ name = line_outs[idx];
+ else
+ name = "Line-Out";
+ break;
+ }
+
+ err = add_mute(codec, name, index,
+ HDA_COMPOSE_AMP_VAL(dac, 3, 0, HDA_OUTPUT), 0, &kctl);
+ if (err < 0)
+ return err;
+ err = snd_ctl_add_slave(spec->vmaster_sw, kctl);
+ if (err < 0)
+ return err;
+
+ err = add_volume(codec, name, index,
+ HDA_COMPOSE_AMP_VAL(dac, 3, 0, HDA_OUTPUT), 0, &kctl);
+ if (err < 0)
+ return err;
+ err = snd_ctl_add_slave(spec->vmaster_vol, kctl);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int build_output(struct hda_codec *codec)
+{
+ struct cs_spec *spec = codec->spec;
+ struct auto_pin_cfg *cfg = &spec->autocfg;
+ int i, err;
+
+ for (i = 0; i < cfg->line_outs; i++) {
+ err = add_output(codec, get_dac(codec, cfg->line_out_pins[i]),
+ i, cfg->line_outs, cfg->line_out_type);
+ if (err < 0)
+ return err;
+ }
+ for (i = 0; i < cfg->hp_outs; i++) {
+ err = add_output(codec, get_dac(codec, cfg->hp_pins[i]),
+ i, cfg->hp_outs, AUTO_PIN_HP_OUT);
+ if (err < 0)
+ return err;
+ }
+ for (i = 0; i < cfg->speaker_outs; i++) {
+ err = add_output(codec, get_dac(codec, cfg->speaker_pins[i]),
+ i, cfg->speaker_outs, AUTO_PIN_SPEAKER_OUT);
+ if (err < 0)
+ return err;
+ }
+ return 0;
+}
+
+/*
+ */
+
+static struct snd_kcontrol_new cs_capture_ctls[] = {
+ HDA_BIND_SW("Capture Switch", 0),
+ HDA_BIND_VOL("Capture Volume", 0),
+};
+
+static int change_cur_input(struct hda_codec *codec, unsigned int idx,
+ int force)
+{
+ struct cs_spec *spec = codec->spec;
+
+ if (spec->cur_input == idx && !force)
+ return 0;
+ if (spec->cur_adc && spec->cur_adc != spec->adc_nid[idx]) {
+ /* stream is running, let's swap the current ADC */
+ snd_hda_codec_cleanup_stream(codec, spec->cur_adc);
+ spec->cur_adc = spec->adc_nid[idx];
+ snd_hda_codec_setup_stream(codec, spec->cur_adc,
+ spec->cur_adc_stream_tag, 0,
+ spec->cur_adc_format);
+ }
+ snd_hda_codec_write(codec, spec->cur_adc, 0,
+ AC_VERB_SET_CONNECT_SEL,
+ spec->adc_idx[idx]);
+ spec->cur_input = idx;
+ return 1;
+}
+
+static int cs_capture_source_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct cs_spec *spec = codec->spec;
+ unsigned int idx;
+
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+ uinfo->count = 1;
+ uinfo->value.enumerated.items = spec->num_inputs;
+ if (uinfo->value.enumerated.item >= spec->num_inputs)
+ uinfo->value.enumerated.item = spec->num_inputs - 1;
+ idx = spec->input_idx[uinfo->value.enumerated.item];
+ strcpy(uinfo->value.enumerated.name, auto_pin_cfg_labels[idx]);
+ return 0;
+}
+
+static int cs_capture_source_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct cs_spec *spec = codec->spec;
+ ucontrol->value.enumerated.item[0] = spec->capsrc_idx[spec->cur_input];
+ return 0;
+}
+
+static int cs_capture_source_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct cs_spec *spec = codec->spec;
+ unsigned int idx = ucontrol->value.enumerated.item[0];
+
+ if (idx >= spec->num_inputs)
+ return -EINVAL;
+ idx = spec->input_idx[idx];
+ return change_cur_input(codec, idx, 0);
+}
+
+static struct snd_kcontrol_new cs_capture_source = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Capture Source",
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .info = cs_capture_source_info,
+ .get = cs_capture_source_get,
+ .put = cs_capture_source_put,
+};
+
+static struct hda_bind_ctls *make_bind_capture(struct hda_codec *codec,
+ struct hda_ctl_ops *ops)
+{
+ struct cs_spec *spec = codec->spec;
+ struct hda_bind_ctls *bind;
+ int i, n;
+
+ bind = kzalloc(sizeof(*bind) + sizeof(long) * (spec->num_inputs + 1),
+ GFP_KERNEL);
+ if (!bind)
+ return NULL;
+ bind->ops = ops;
+ n = 0;
+ for (i = 0; i < AUTO_PIN_LAST; i++) {
+ if (!spec->adc_nid[i])
+ continue;
+ bind->values[n++] =
+ HDA_COMPOSE_AMP_VAL(spec->adc_nid[i], 3,
+ spec->adc_idx[i], HDA_INPUT);
+ }
+ return bind;
+}
+
+static int build_input(struct hda_codec *codec)
+{
+ struct cs_spec *spec = codec->spec;
+ int i, err;
+
+ if (!spec->num_inputs)
+ return 0;
+
+ /* make bind-capture */
+ spec->capture_bind[0] = make_bind_capture(codec, &snd_hda_bind_sw);
+ spec->capture_bind[1] = make_bind_capture(codec, &snd_hda_bind_vol);
+ for (i = 0; i < 2; i++) {
+ struct snd_kcontrol *kctl;
+ if (!spec->capture_bind[i])
+ return -ENOMEM;
+ kctl = snd_ctl_new1(&cs_capture_ctls[i], codec);
+ if (!kctl)
+ return -ENOMEM;
+ kctl->private_value = (long)spec->capture_bind[i];
+ err = snd_hda_ctl_add(codec, kctl);
+ if (err < 0)
+ return err;
+ }
+
+ if (spec->num_inputs > 1 && !spec->mic_detect) {
+ err = snd_hda_ctl_add(codec,
+ snd_ctl_new1(&cs_capture_source, codec));
+ if (err < 0)
+ return err;
+ }
+
+ return 0;
+}
+
+/*
+ */
+
+static int build_digital_output(struct hda_codec *codec)
+{
+ struct cs_spec *spec = codec->spec;
+ int err;
+
+ if (!spec->multiout.dig_out_nid)
+ return 0;
+
+ err = snd_hda_create_spdif_out_ctls(codec, spec->multiout.dig_out_nid);
+ if (err < 0)
+ return err;
+ err = snd_hda_create_spdif_share_sw(codec, &spec->multiout);
+ if (err < 0)
+ return err;
+ return 0;
+}
+
+static int build_digital_input(struct hda_codec *codec)
+{
+ struct cs_spec *spec = codec->spec;
+ if (spec->dig_in)
+ return snd_hda_create_spdif_in_ctls(codec, spec->dig_in);
+ return 0;
+}
+
+/*
+ * auto-mute and auto-mic switching
+ */
+
+static void cs_automute(struct hda_codec *codec)
+{
+ struct cs_spec *spec = codec->spec;
+ struct auto_pin_cfg *cfg = &spec->autocfg;
+ unsigned int caps, present, hp_present;
+ hda_nid_t nid;
+ int i;
+
+ hp_present = 0;
+ for (i = 0; i < cfg->hp_outs; i++) {
+ nid = cfg->hp_pins[i];
+ caps = snd_hda_query_pin_caps(codec, nid);
+ if (!(caps & AC_PINCAP_PRES_DETECT))
+ continue;
+ if (caps & AC_PINCAP_TRIG_REQ)
+ snd_hda_codec_read(codec, nid, 0,
+ AC_VERB_SET_PIN_SENSE, 0);
+ present = snd_hda_codec_read(codec, nid, 0,
+ AC_VERB_GET_PIN_SENSE, 0);
+ hp_present |= (present & AC_PINSENSE_PRESENCE) != 0;
+ if (hp_present)
+ break;
+ }
+ for (i = 0; i < cfg->speaker_outs; i++) {
+ nid = cfg->speaker_pins[i];
+ snd_hda_codec_write(codec, nid, 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL,
+ hp_present ? 0 : PIN_OUT);
+ }
+ if (spec->board_config == CS420X_MBP55) {
+ unsigned int gpio = hp_present ? 0x02 : 0x08;
+ snd_hda_codec_write(codec, 0x01, 0,
+ AC_VERB_SET_GPIO_DATA, gpio);
+ }
+}
+
+static void cs_automic(struct hda_codec *codec)
+{
+ struct cs_spec *spec = codec->spec;
+ struct auto_pin_cfg *cfg = &spec->autocfg;
+ hda_nid_t nid;
+ unsigned int caps, present;
+
+ nid = cfg->input_pins[spec->automic_idx];
+ caps = snd_hda_query_pin_caps(codec, nid);
+ if (caps & AC_PINCAP_TRIG_REQ)
+ snd_hda_codec_read(codec, nid, 0, AC_VERB_SET_PIN_SENSE, 0);
+ present = snd_hda_codec_read(codec, nid, 0,
+ AC_VERB_GET_PIN_SENSE, 0);
+ if (present & AC_PINSENSE_PRESENCE)
+ change_cur_input(codec, spec->automic_idx, 0);
+ else {
+ unsigned int imic = (spec->automic_idx == AUTO_PIN_MIC) ?
+ AUTO_PIN_FRONT_MIC : AUTO_PIN_MIC;
+ change_cur_input(codec, imic, 0);
+ }
+}
+
+/*
+ */
+
+static void init_output(struct hda_codec *codec)
+{
+ struct cs_spec *spec = codec->spec;
+ struct auto_pin_cfg *cfg = &spec->autocfg;
+ int i;
+
+ /* mute first */
+ for (i = 0; i < spec->multiout.num_dacs; i++)
+ snd_hda_codec_write(codec, spec->multiout.dac_nids[i], 0,
+ AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE);
+ if (spec->multiout.hp_nid)
+ snd_hda_codec_write(codec, spec->multiout.hp_nid, 0,
+ AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE);
+ for (i = 0; i < ARRAY_SIZE(spec->multiout.extra_out_nid); i++) {
+ if (!spec->multiout.extra_out_nid[i])
+ break;
+ snd_hda_codec_write(codec, spec->multiout.extra_out_nid[i], 0,
+ AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE);
+ }
+
+ /* set appropriate pin controls */
+ for (i = 0; i < cfg->line_outs; i++)
+ snd_hda_codec_write(codec, cfg->line_out_pins[i], 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT);
+ for (i = 0; i < cfg->hp_outs; i++) {
+ hda_nid_t nid = cfg->hp_pins[i];
+ snd_hda_codec_write(codec, nid, 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP);
+ if (!cfg->speaker_outs)
+ continue;
+ if (get_wcaps(codec, nid) & AC_WCAP_UNSOL_CAP) {
+ snd_hda_codec_write(codec, nid, 0,
+ AC_VERB_SET_UNSOLICITED_ENABLE,
+ AC_USRSP_EN | HP_EVENT);
+ spec->hp_detect = 1;
+ }
+ }
+ for (i = 0; i < cfg->speaker_outs; i++)
+ snd_hda_codec_write(codec, cfg->speaker_pins[i], 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT);
+ if (spec->hp_detect)
+ cs_automute(codec);
+}
+
+static void init_input(struct hda_codec *codec)
+{
+ struct cs_spec *spec = codec->spec;
+ struct auto_pin_cfg *cfg = &spec->autocfg;
+ unsigned int coef;
+ int i;
+
+ for (i = 0; i < AUTO_PIN_LAST; i++) {
+ unsigned int ctl;
+ hda_nid_t pin = cfg->input_pins[i];
+ if (!pin || !spec->adc_nid[i])
+ continue;
+ /* set appropriate pin control and mute first */
+ ctl = PIN_IN;
+ if (i <= AUTO_PIN_FRONT_MIC) {
+ unsigned int caps = snd_hda_query_pin_caps(codec, pin);
+ caps >>= AC_PINCAP_VREF_SHIFT;
+ if (caps & AC_PINCAP_VREF_80)
+ ctl = PIN_VREF80;
+ }
+ snd_hda_codec_write(codec, pin, 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL, ctl);
+ snd_hda_codec_write(codec, spec->adc_nid[i], 0,
+ AC_VERB_SET_AMP_GAIN_MUTE,
+ AMP_IN_MUTE(spec->adc_idx[i]));
+ if (spec->mic_detect && spec->automic_idx == i)
+ snd_hda_codec_write(codec, pin, 0,
+ AC_VERB_SET_UNSOLICITED_ENABLE,
+ AC_USRSP_EN | MIC_EVENT);
+ }
+ change_cur_input(codec, spec->cur_input, 1);
+ if (spec->mic_detect)
+ cs_automic(codec);
+
+ coef = 0x000a; /* ADC1/2 - Digital and Analog Soft Ramp */
+ if (is_active_pin(codec, CS_DMIC2_PIN_NID))
+ coef |= 0x0500; /* DMIC2 enable 2 channels, disable GPIO1 */
+ if (is_active_pin(codec, CS_DMIC1_PIN_NID))
+ coef |= 0x1800; /* DMIC1 enable 2 channels, disable GPIO0
+ * No effect if SPDIF_OUT2 is slected in
+ * IDX_SPDIF_CTL.
+ */
+ cs_vendor_coef_set(codec, IDX_ADC_CFG, coef);
+}
+
+static struct hda_verb cs_coef_init_verbs[] = {
+ {0x11, AC_VERB_SET_PROC_STATE, 1},
+ {0x11, AC_VERB_SET_COEF_INDEX, IDX_DAC_CFG},
+ {0x11, AC_VERB_SET_PROC_COEF,
+ (0x002a /* DAC1/2/3 SZCMode Soft Ramp */
+ | 0x0040 /* Mute DACs on FIFO error */
+ | 0x1000 /* Enable DACs High Pass Filter */
+ | 0x0400 /* Disable Coefficient Auto increment */
+ )},
+ /* Beep */
+ {0x11, AC_VERB_SET_COEF_INDEX, IDX_DAC_CFG},
+ {0x11, AC_VERB_SET_PROC_COEF, 0x0007}, /* Enable Beep thru DAC1/2/3 */
+
+ {} /* terminator */
+};
+
+/* SPDIF setup */
+static void init_digital(struct hda_codec *codec)
+{
+ unsigned int coef;
+
+ coef = 0x0002; /* SRC_MUTE soft-mute on SPDIF (if no lock) */
+ coef |= 0x0008; /* Replace with mute on error */
+ if (is_active_pin(codec, CS_DIG_OUT2_PIN_NID))
+ coef |= 0x4000; /* RX to TX1 or TX2 Loopthru / SPDIF2
+ * SPDIF_OUT2 is shared with GPIO1 and
+ * DMIC_SDA2.
+ */
+ cs_vendor_coef_set(codec, IDX_SPDIF_CTL, coef);
+}
+
+static int cs_init(struct hda_codec *codec)
+{
+ struct cs_spec *spec = codec->spec;
+
+ snd_hda_sequence_write(codec, cs_coef_init_verbs);
+
+ if (spec->gpio_mask) {
+ snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_MASK,
+ spec->gpio_mask);
+ snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DIRECTION,
+ spec->gpio_dir);
+ snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA,
+ spec->gpio_data);
+ }
+
+ init_output(codec);
+ init_input(codec);
+ init_digital(codec);
+ return 0;
+}
+
+static int cs_build_controls(struct hda_codec *codec)
+{
+ int err;
+
+ err = build_output(codec);
+ if (err < 0)
+ return err;
+ err = build_input(codec);
+ if (err < 0)
+ return err;
+ err = build_digital_output(codec);
+ if (err < 0)
+ return err;
+ err = build_digital_input(codec);
+ if (err < 0)
+ return err;
+ return cs_init(codec);
+}
+
+static void cs_free(struct hda_codec *codec)
+{
+ struct cs_spec *spec = codec->spec;
+ kfree(spec->capture_bind[0]);
+ kfree(spec->capture_bind[1]);
+ kfree(codec->spec);
+}
+
+static void cs_unsol_event(struct hda_codec *codec, unsigned int res)
+{
+ switch ((res >> 26) & 0x7f) {
+ case HP_EVENT:
+ cs_automute(codec);
+ break;
+ case MIC_EVENT:
+ cs_automic(codec);
+ break;
+ }
+}
+
+static struct hda_codec_ops cs_patch_ops = {
+ .build_controls = cs_build_controls,
+ .build_pcms = cs_build_pcms,
+ .init = cs_init,
+ .free = cs_free,
+ .unsol_event = cs_unsol_event,
+};
+
+static int cs_parse_auto_config(struct hda_codec *codec)
+{
+ struct cs_spec *spec = codec->spec;
+ int err;
+
+ err = snd_hda_parse_pin_def_config(codec, &spec->autocfg, NULL);
+ if (err < 0)
+ return err;
+
+ err = parse_output(codec);
+ if (err < 0)
+ return err;
+ err = parse_input(codec);
+ if (err < 0)
+ return err;
+ err = parse_digital_output(codec);
+ if (err < 0)
+ return err;
+ err = parse_digital_input(codec);
+ if (err < 0)
+ return err;
+ return 0;
+}
+
+static const char *cs420x_models[CS420X_MODELS] = {
+ [CS420X_MBP55] = "mbp55",
+ [CS420X_AUTO] = "auto",
+};
+
+
+static struct snd_pci_quirk cs420x_cfg_tbl[] = {
+ SND_PCI_QUIRK(0x10de, 0xcb79, "MacBookPro 5,5", CS420X_MBP55),
+ {} /* terminator */
+};
+
+struct cs_pincfg {
+ hda_nid_t nid;
+ u32 val;
+};
+
+static struct cs_pincfg mbp55_pincfgs[] = {
+ { 0x09, 0x012b4030 },
+ { 0x0a, 0x90100121 },
+ { 0x0b, 0x90100120 },
+ { 0x0c, 0x400000f0 },
+ { 0x0d, 0x90a00110 },
+ { 0x0e, 0x400000f0 },
+ { 0x0f, 0x400000f0 },
+ { 0x10, 0x014be040 },
+ { 0x12, 0x400000f0 },
+ { 0x15, 0x400000f0 },
+ {} /* terminator */
+};
+
+static struct cs_pincfg *cs_pincfgs[CS420X_MODELS] = {
+ [CS420X_MBP55] = mbp55_pincfgs,
+};
+
+static void fix_pincfg(struct hda_codec *codec, int model)
+{
+ const struct cs_pincfg *cfg = cs_pincfgs[model];
+ if (!cfg)
+ return;
+ for (; cfg->nid; cfg++)
+ snd_hda_codec_set_pincfg(codec, cfg->nid, cfg->val);
+}
+
+
+static int patch_cs420x(struct hda_codec *codec)
+{
+ struct cs_spec *spec;
+ int err;
+
+ spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+ if (!spec)
+ return -ENOMEM;
+ codec->spec = spec;
+
+ spec->board_config =
+ snd_hda_check_board_config(codec, CS420X_MODELS,
+ cs420x_models, cs420x_cfg_tbl);
+ if (spec->board_config >= 0)
+ fix_pincfg(codec, spec->board_config);
+
+ switch (spec->board_config) {
+ case CS420X_MBP55:
+ /* GPIO1 = headphones */
+ /* GPIO3 = speakers */
+ spec->gpio_mask = 0x0a;
+ spec->gpio_dir = 0x0a;
+ break;
+ }
+
+ err = cs_parse_auto_config(codec);
+ if (err < 0)
+ goto error;
+
+ codec->patch_ops = cs_patch_ops;
+
+ return 0;
+
+ error:
+ kfree(codec->spec);
+ codec->spec = NULL;
+ return err;
+}
+
+
+/*
+ * patch entries
+ */
+static struct hda_codec_preset snd_hda_preset_cirrus[] = {
+ { .id = 0x10134206, .name = "CS4206", .patch = patch_cs420x },
+ { .id = 0x10134207, .name = "CS4207", .patch = patch_cs420x },
+ {} /* terminator */
+};
+
+MODULE_ALIAS("snd-hda-codec-id:10134206");
+MODULE_ALIAS("snd-hda-codec-id:10134207");
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Cirrus Logic HD-audio codec");
+
+static struct hda_codec_preset_list cirrus_list = {
+ .preset = snd_hda_preset_cirrus,
+ .owner = THIS_MODULE,
+};
+
+static int __init patch_cirrus_init(void)
+{
+ return snd_hda_add_codec_preset(&cirrus_list);
+}
+
+static void __exit patch_cirrus_exit(void)
+{
+ snd_hda_delete_codec_preset(&cirrus_list);
+}
+
+module_init(patch_cirrus_init)
+module_exit(patch_cirrus_exit)
cmi9880_models,
cmi9880_cfg_tbl);
if (spec->board_config < 0) {
- snd_printdd(KERN_INFO "hda_codec: Unknown model for CMI9880\n");
+ snd_printdd(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
+ codec->chip_name);
spec->board_config = CMI_AUTO; /* try everything */
}
struct hda_input_mux private_imux;
hda_nid_t private_dac_nids[AUTO_CFG_MAX_OUTS];
+ unsigned int dell_automute;
+ unsigned int port_d_mode;
};
static int conexant_playback_pcm_open(struct hda_pcm_stream *hinfo,
return 0;
}
+/* Conexant 5066 specific */
+
+static hda_nid_t cxt5066_dac_nids[1] = { 0x10 };
+static hda_nid_t cxt5066_adc_nids[3] = { 0x14, 0x15, 0x16 };
+static hda_nid_t cxt5066_capsrc_nids[1] = { 0x17 };
+#define CXT5066_SPDIF_OUT 0x21
+
+static struct hda_channel_mode cxt5066_modes[1] = {
+ { 2, NULL },
+};
+
+static void cxt5066_update_speaker(struct hda_codec *codec)
+{
+ struct conexant_spec *spec = codec->spec;
+ unsigned int pinctl;
+
+ snd_printdd("CXT5066: update speaker, hp_present=%d\n",
+ spec->hp_present);
+
+ /* Port A (HP) */
+ pinctl = ((spec->hp_present & 1) && spec->cur_eapd) ? PIN_HP : 0;
+ snd_hda_codec_write(codec, 0x19, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
+ pinctl);
+
+ /* Port D (HP/LO) */
+ pinctl = ((spec->hp_present & 2) && spec->cur_eapd)
+ ? spec->port_d_mode : 0;
+ snd_hda_codec_write(codec, 0x1c, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
+ pinctl);
+
+ /* CLASS_D AMP */
+ pinctl = (!spec->hp_present && spec->cur_eapd) ? PIN_OUT : 0;
+ snd_hda_codec_write(codec, 0x1f, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
+ pinctl);
+
+ if (spec->dell_automute) {
+ /* DELL AIO Port Rule: PortA > PortD > IntSpk */
+ pinctl = (!(spec->hp_present & 1) && spec->cur_eapd)
+ ? PIN_OUT : 0;
+ snd_hda_codec_write(codec, 0x1c, 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL, pinctl);
+ }
+}
+
+/* turn on/off EAPD (+ mute HP) as a master switch */
+static int cxt5066_hp_master_sw_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+
+ if (!cxt_eapd_put(kcontrol, ucontrol))
+ return 0;
+
+ cxt5066_update_speaker(codec);
+ return 1;
+}
+
+/* toggle input of built-in and mic jack appropriately */
+static void cxt5066_automic(struct hda_codec *codec)
+{
+ static struct hda_verb ext_mic_present[] = {
+ /* enable external mic, port B */
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+
+ /* switch to external mic input */
+ {0x17, AC_VERB_SET_CONNECT_SEL, 0},
+
+ /* disable internal mic, port C */
+ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+ {}
+ };
+ static struct hda_verb ext_mic_absent[] = {
+ /* enable internal mic, port C */
+ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+
+ /* switch to internal mic input */
+ {0x17, AC_VERB_SET_CONNECT_SEL, 1},
+
+ /* disable external mic, port B */
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+ {}
+ };
+ unsigned int present;
+
+ present = snd_hda_codec_read(codec, 0x1a, 0,
+ AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+ if (present) {
+ snd_printdd("CXT5066: external microphone detected\n");
+ snd_hda_sequence_write(codec, ext_mic_present);
+ } else {
+ snd_printdd("CXT5066: external microphone absent\n");
+ snd_hda_sequence_write(codec, ext_mic_absent);
+ }
+}
+
+/* mute internal speaker if HP is plugged */
+static void cxt5066_hp_automute(struct hda_codec *codec)
+{
+ struct conexant_spec *spec = codec->spec;
+ unsigned int portA, portD;
+
+ /* Port A */
+ portA = snd_hda_codec_read(codec, 0x19, 0, AC_VERB_GET_PIN_SENSE, 0)
+ & AC_PINSENSE_PRESENCE;
+
+ /* Port D */
+ portD = (snd_hda_codec_read(codec, 0x1c, 0, AC_VERB_GET_PIN_SENSE, 0)
+ & AC_PINSENSE_PRESENCE) << 1;
+
+ spec->hp_present = !!(portA | portD);
+ snd_printdd("CXT5066: hp automute portA=%x portD=%x present=%d\n",
+ portA, portD, spec->hp_present);
+ cxt5066_update_speaker(codec);
+}
+
+/* unsolicited event for jack sensing */
+static void cxt5066_unsol_event(struct hda_codec *codec, unsigned int res)
+{
+ snd_printdd("CXT5066: unsol event %x (%x)\n", res, res >> 26);
+ switch (res >> 26) {
+ case CONEXANT_HP_EVENT:
+ cxt5066_hp_automute(codec);
+ break;
+ case CONEXANT_MIC_EVENT:
+ cxt5066_automic(codec);
+ break;
+ }
+}
+
+static const struct hda_input_mux cxt5066_analog_mic_boost = {
+ .num_items = 5,
+ .items = {
+ { "0dB", 0 },
+ { "10dB", 1 },
+ { "20dB", 2 },
+ { "30dB", 3 },
+ { "40dB", 4 },
+ },
+};
+
+static int cxt5066_mic_boost_mux_enum_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ return snd_hda_input_mux_info(&cxt5066_analog_mic_boost, uinfo);
+}
+
+static int cxt5066_mic_boost_mux_enum_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ int val;
+
+ val = snd_hda_codec_read(codec, 0x17, 0,
+ AC_VERB_GET_AMP_GAIN_MUTE, AC_AMP_GET_OUTPUT);
+
+ ucontrol->value.enumerated.item[0] = val & AC_AMP_GAIN;
+ return 0;
+}
+
+static int cxt5066_mic_boost_mux_enum_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ const struct hda_input_mux *imux = &cxt5066_analog_mic_boost;
+ unsigned int idx;
+
+ if (!imux->num_items)
+ return 0;
+ idx = ucontrol->value.enumerated.item[0];
+ if (idx >= imux->num_items)
+ idx = imux->num_items - 1;
+
+ snd_hda_codec_write_cache(codec, 0x17, 0,
+ AC_VERB_SET_AMP_GAIN_MUTE,
+ AC_AMP_SET_RIGHT | AC_AMP_SET_LEFT | AC_AMP_SET_OUTPUT |
+ imux->items[idx].index);
+
+ return 1;
+}
+
+static struct hda_input_mux cxt5066_capture_source = {
+ .num_items = 4,
+ .items = {
+ { "Mic B", 0 },
+ { "Mic C", 1 },
+ { "Mic E", 2 },
+ { "Mic F", 3 },
+ },
+};
+
+static struct hda_bind_ctls cxt5066_bind_capture_vol_others = {
+ .ops = &snd_hda_bind_vol,
+ .values = {
+ HDA_COMPOSE_AMP_VAL(0x14, 3, 0, HDA_INPUT),
+ HDA_COMPOSE_AMP_VAL(0x14, 3, 2, HDA_INPUT),
+ 0
+ },
+};
+
+static struct hda_bind_ctls cxt5066_bind_capture_sw_others = {
+ .ops = &snd_hda_bind_sw,
+ .values = {
+ HDA_COMPOSE_AMP_VAL(0x14, 3, 0, HDA_INPUT),
+ HDA_COMPOSE_AMP_VAL(0x14, 3, 2, HDA_INPUT),
+ 0
+ },
+};
+
+static struct snd_kcontrol_new cxt5066_mixer_master[] = {
+ HDA_CODEC_VOLUME("Master Playback Volume", 0x10, 0x00, HDA_OUTPUT),
+ {}
+};
+
+static struct snd_kcontrol_new cxt5066_mixer_master_olpc[] = {
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Master Playback Volume",
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
+ SNDRV_CTL_ELEM_ACCESS_TLV_READ |
+ SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK,
+ .info = snd_hda_mixer_amp_volume_info,
+ .get = snd_hda_mixer_amp_volume_get,
+ .put = snd_hda_mixer_amp_volume_put,
+ .tlv = { .c = snd_hda_mixer_amp_tlv },
+ /* offset by 28 volume steps to limit minimum gain to -46dB */
+ .private_value =
+ HDA_COMPOSE_AMP_VAL_OFS(0x10, 3, 0, HDA_OUTPUT, 28),
+ },
+ {}
+};
+
+static struct snd_kcontrol_new cxt5066_mixers[] = {
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Master Playback Switch",
+ .info = cxt_eapd_info,
+ .get = cxt_eapd_get,
+ .put = cxt5066_hp_master_sw_put,
+ .private_value = 0x1d,
+ },
+
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Analog Mic Boost Capture Enum",
+ .info = cxt5066_mic_boost_mux_enum_info,
+ .get = cxt5066_mic_boost_mux_enum_get,
+ .put = cxt5066_mic_boost_mux_enum_put,
+ },
+
+ HDA_BIND_VOL("Capture Volume", &cxt5066_bind_capture_vol_others),
+ HDA_BIND_SW("Capture Switch", &cxt5066_bind_capture_sw_others),
+ {}
+};
+
+static struct hda_verb cxt5066_init_verbs[] = {
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, /* Port B */
+ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, /* Port C */
+ {0x1e, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, /* Port F */
+ {0x1d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, /* Port E */
+
+ /* Speakers */
+ {0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x1f, AC_VERB_SET_CONNECT_SEL, 0x00}, /* DAC1 */
+
+ /* HP, Amp */
+ {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x19, AC_VERB_SET_CONNECT_SEL, 0x00}, /* DAC1 */
+
+ {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x1c, AC_VERB_SET_CONNECT_SEL, 0x00}, /* DAC1 */
+
+ /* DAC1 */
+ {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+
+ /* Node 14 connections: 0x17 0x18 0x23 0x24 0x27 */
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0) | 0x50},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2) | 0x50},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+
+ /* no digital microphone support yet */
+ {0x23, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+
+ /* Audio input selector */
+ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE | 0x3},
+
+ /* SPDIF route: PCM */
+ {0x20, AC_VERB_SET_CONNECT_SEL, 0x0},
+ {0x22, AC_VERB_SET_CONNECT_SEL, 0x0},
+
+ {0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x22, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+
+ /* EAPD */
+ {0x1d, AC_VERB_SET_EAPD_BTLENABLE, 0x2}, /* default on */
+
+ /* not handling these yet */
+ {0x19, AC_VERB_SET_UNSOLICITED_ENABLE, 0},
+ {0x1a, AC_VERB_SET_UNSOLICITED_ENABLE, 0},
+ {0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, 0},
+ {0x1c, AC_VERB_SET_UNSOLICITED_ENABLE, 0},
+ {0x1d, AC_VERB_SET_UNSOLICITED_ENABLE, 0},
+ {0x1e, AC_VERB_SET_UNSOLICITED_ENABLE, 0},
+ {0x20, AC_VERB_SET_UNSOLICITED_ENABLE, 0},
+ {0x22, AC_VERB_SET_UNSOLICITED_ENABLE, 0},
+ { } /* end */
+};
+
+static struct hda_verb cxt5066_init_verbs_olpc[] = {
+ /* Port A: headphones */
+ {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x19, AC_VERB_SET_CONNECT_SEL, 0x00}, /* DAC1 */
+
+ /* Port B: external microphone */
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+
+ /* Port C: internal microphone */
+ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+
+ /* Port D: unused */
+ {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+
+ /* Port E: unused, but has primary EAPD */
+ {0x1d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+ {0x1d, AC_VERB_SET_EAPD_BTLENABLE, 0x2}, /* default on */
+
+ /* Port F: unused */
+ {0x1e, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+
+ /* Port G: internal speakers */
+ {0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x1f, AC_VERB_SET_CONNECT_SEL, 0x00}, /* DAC1 */
+
+ /* DAC1 */
+ {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+
+ /* DAC2: unused */
+ {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0) | 0x50},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+
+ /* Disable digital microphone port */
+ {0x23, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+
+ /* Audio input selectors */
+ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE | 0x3},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+
+ /* Disable SPDIF */
+ {0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+ {0x22, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+
+ /* enable unsolicited events for Port A and B */
+ {0x19, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | CONEXANT_HP_EVENT},
+ {0x1a, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | CONEXANT_MIC_EVENT},
+ { } /* end */
+};
+
+static struct hda_verb cxt5066_init_verbs_portd_lo[] = {
+ {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ { } /* end */
+};
+
+/* initialize jack-sensing, too */
+static int cxt5066_init(struct hda_codec *codec)
+{
+ snd_printdd("CXT5066: init\n");
+ conexant_init(codec);
+ if (codec->patch_ops.unsol_event) {
+ cxt5066_hp_automute(codec);
+ cxt5066_automic(codec);
+ }
+ return 0;
+}
+
+enum {
+ CXT5066_LAPTOP, /* Laptops w/ EAPD support */
+ CXT5066_DELL_LAPTOP, /* Dell Laptop */
+ CXT5066_OLPC_XO_1_5, /* OLPC XO 1.5 */
+ CXT5066_MODELS
+};
+
+static const char *cxt5066_models[CXT5066_MODELS] = {
+ [CXT5066_LAPTOP] = "laptop",
+ [CXT5066_DELL_LAPTOP] = "dell-laptop",
+ [CXT5066_OLPC_XO_1_5] = "olpc-xo-1_5",
+};
+
+static struct snd_pci_quirk cxt5066_cfg_tbl[] = {
+ SND_PCI_QUIRK(0x14f1, 0x0101, "Conexant Reference board",
+ CXT5066_LAPTOP),
+ SND_PCI_QUIRK(0x1028, 0x02f5, "Dell",
+ CXT5066_DELL_LAPTOP),
+ {}
+};
+
+static int patch_cxt5066(struct hda_codec *codec)
+{
+ struct conexant_spec *spec;
+ int board_config;
+
+ spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+ if (!spec)
+ return -ENOMEM;
+ codec->spec = spec;
+
+ codec->patch_ops = conexant_patch_ops;
+ codec->patch_ops.init = cxt5066_init;
+
+ spec->dell_automute = 0;
+ spec->multiout.max_channels = 2;
+ spec->multiout.num_dacs = ARRAY_SIZE(cxt5066_dac_nids);
+ spec->multiout.dac_nids = cxt5066_dac_nids;
+ spec->multiout.dig_out_nid = CXT5066_SPDIF_OUT;
+ spec->num_adc_nids = 1;
+ spec->adc_nids = cxt5066_adc_nids;
+ spec->capsrc_nids = cxt5066_capsrc_nids;
+ spec->input_mux = &cxt5066_capture_source;
+
+ spec->port_d_mode = PIN_HP;
+
+ spec->num_init_verbs = 1;
+ spec->init_verbs[0] = cxt5066_init_verbs;
+ spec->num_channel_mode = ARRAY_SIZE(cxt5066_modes);
+ spec->channel_mode = cxt5066_modes;
+ spec->cur_adc = 0;
+ spec->cur_adc_idx = 0;
+
+ board_config = snd_hda_check_board_config(codec, CXT5066_MODELS,
+ cxt5066_models, cxt5066_cfg_tbl);
+ switch (board_config) {
+ default:
+ case CXT5066_LAPTOP:
+ spec->mixers[spec->num_mixers++] = cxt5066_mixer_master;
+ spec->mixers[spec->num_mixers++] = cxt5066_mixers;
+ break;
+ case CXT5066_DELL_LAPTOP:
+ spec->mixers[spec->num_mixers++] = cxt5066_mixer_master;
+ spec->mixers[spec->num_mixers++] = cxt5066_mixers;
+
+ spec->port_d_mode = PIN_OUT;
+ spec->init_verbs[spec->num_init_verbs] = cxt5066_init_verbs_portd_lo;
+ spec->num_init_verbs++;
+ spec->dell_automute = 1;
+ break;
+ case CXT5066_OLPC_XO_1_5:
+ codec->patch_ops.unsol_event = cxt5066_unsol_event;
+ spec->init_verbs[0] = cxt5066_init_verbs_olpc;
+ spec->mixers[spec->num_mixers++] = cxt5066_mixer_master_olpc;
+ spec->mixers[spec->num_mixers++] = cxt5066_mixers;
+ spec->port_d_mode = 0;
+
+ /* no S/PDIF out */
+ spec->multiout.dig_out_nid = 0;
+
+ /* input source automatically selected */
+ spec->input_mux = NULL;
+ break;
+ }
+
+ return 0;
+}
/*
*/
.patch = patch_cxt5047 },
{ .id = 0x14f15051, .name = "CX20561 (Hermosa)",
.patch = patch_cxt5051 },
+ { .id = 0x14f15066, .name = "CX20582 (Pebble)",
+ .patch = patch_cxt5066 },
{} /* terminator */
};
MODULE_ALIAS("snd-hda-codec-id:14f15045");
MODULE_ALIAS("snd-hda-codec-id:14f15047");
MODULE_ALIAS("snd-hda-codec-id:14f15051");
+MODULE_ALIAS("snd-hda-codec-id:14f15066");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Conexant HD-audio codec");
#include "hda_codec.h"
#include "hda_local.h"
-#define CVT_NID 0x02 /* audio converter */
-#define PIN_NID 0x03 /* HDMI output pin */
+static hda_nid_t cvt_nid; /* audio converter */
+static hda_nid_t pin_nid; /* HDMI output pin */
#define INTEL_HDMI_EVENT_TAG 0x08
struct hdmi_eld sink_eld;
};
-static struct hda_verb pinout_enable_verb[] = {
- {PIN_NID, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {} /* terminator */
-};
-
-static struct hda_verb unsolicited_response_verb[] = {
- {PIN_NID, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN |
- INTEL_HDMI_EVENT_TAG},
- {}
-};
-
-static struct hda_verb def_chan_map[] = {
- {CVT_NID, AC_VERB_SET_HDMI_CHAN_SLOT, 0x00},
- {CVT_NID, AC_VERB_SET_HDMI_CHAN_SLOT, 0x11},
- {CVT_NID, AC_VERB_SET_HDMI_CHAN_SLOT, 0x22},
- {CVT_NID, AC_VERB_SET_HDMI_CHAN_SLOT, 0x33},
- {CVT_NID, AC_VERB_SET_HDMI_CHAN_SLOT, 0x44},
- {CVT_NID, AC_VERB_SET_HDMI_CHAN_SLOT, 0x55},
- {CVT_NID, AC_VERB_SET_HDMI_CHAN_SLOT, 0x66},
- {CVT_NID, AC_VERB_SET_HDMI_CHAN_SLOT, 0x77},
- {}
-};
-
-
struct hdmi_audio_infoframe {
u8 type; /* 0x84 */
u8 ver; /* 0x01 */
static void hdmi_enable_output(struct hda_codec *codec)
{
/* Unmute */
- if (get_wcaps(codec, PIN_NID) & AC_WCAP_OUT_AMP)
- snd_hda_codec_write(codec, PIN_NID, 0,
+ if (get_wcaps(codec, pin_nid) & AC_WCAP_OUT_AMP)
+ snd_hda_codec_write(codec, pin_nid, 0,
AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE);
/* Enable pin out */
- snd_hda_sequence_write(codec, pinout_enable_verb);
+ snd_hda_codec_write(codec, pin_nid, 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT);
}
/*
*/
static void hdmi_start_infoframe_trans(struct hda_codec *codec)
{
- hdmi_set_dip_index(codec, PIN_NID, 0x0, 0x0);
- snd_hda_codec_write(codec, PIN_NID, 0, AC_VERB_SET_HDMI_DIP_XMIT,
+ hdmi_set_dip_index(codec, pin_nid, 0x0, 0x0);
+ snd_hda_codec_write(codec, pin_nid, 0, AC_VERB_SET_HDMI_DIP_XMIT,
AC_DIPXMIT_BEST);
}
*/
static void hdmi_stop_infoframe_trans(struct hda_codec *codec)
{
- hdmi_set_dip_index(codec, PIN_NID, 0x0, 0x0);
- snd_hda_codec_write(codec, PIN_NID, 0, AC_VERB_SET_HDMI_DIP_XMIT,
+ hdmi_set_dip_index(codec, pin_nid, 0x0, 0x0);
+ snd_hda_codec_write(codec, pin_nid, 0, AC_VERB_SET_HDMI_DIP_XMIT,
AC_DIPXMIT_DISABLE);
}
static int hdmi_get_channel_count(struct hda_codec *codec)
{
- return 1 + snd_hda_codec_read(codec, CVT_NID, 0,
+ return 1 + snd_hda_codec_read(codec, cvt_nid, 0,
AC_VERB_GET_CVT_CHAN_COUNT, 0);
}
static void hdmi_set_channel_count(struct hda_codec *codec, int chs)
{
- snd_hda_codec_write(codec, CVT_NID, 0,
+ snd_hda_codec_write(codec, cvt_nid, 0,
AC_VERB_SET_CVT_CHAN_COUNT, chs - 1);
if (chs != hdmi_get_channel_count(codec))
int slot;
for (i = 0; i < 8; i++) {
- slot = snd_hda_codec_read(codec, CVT_NID, 0,
+ slot = snd_hda_codec_read(codec, cvt_nid, 0,
AC_VERB_GET_HDMI_CHAN_SLOT, i);
printk(KERN_DEBUG "HDMI: ASP channel %d => slot %d\n",
slot >> 4, slot & 0x7);
struct intel_hdmi_spec *spec = codec->spec;
struct hdmi_eld *eld = &spec->sink_eld;
- if (!snd_hdmi_get_eld(eld, codec, PIN_NID))
+ if (!snd_hdmi_get_eld(eld, codec, pin_nid))
snd_hdmi_show_eld(eld);
}
int i;
int size;
- size = snd_hdmi_get_eld_size(codec, PIN_NID);
+ size = snd_hdmi_get_eld_size(codec, pin_nid);
printk(KERN_DEBUG "HDMI: ELD buf size is %d\n", size);
for (i = 0; i < 8; i++) {
- size = snd_hda_codec_read(codec, PIN_NID, 0,
+ size = snd_hda_codec_read(codec, pin_nid, 0,
AC_VERB_GET_HDMI_DIP_SIZE, i);
printk(KERN_DEBUG "HDMI: DIP GP[%d] buf size is %d\n", i, size);
}
int size;
int pi, bi;
for (i = 0; i < 8; i++) {
- size = snd_hda_codec_read(codec, PIN_NID, 0,
+ size = snd_hda_codec_read(codec, pin_nid, 0,
AC_VERB_GET_HDMI_DIP_SIZE, i);
if (size == 0)
continue;
- hdmi_set_dip_index(codec, PIN_NID, i, 0x0);
+ hdmi_set_dip_index(codec, pin_nid, i, 0x0);
for (j = 1; j < 1000; j++) {
- hdmi_write_dip_byte(codec, PIN_NID, 0x0);
- hdmi_get_dip_index(codec, PIN_NID, &pi, &bi);
+ hdmi_write_dip_byte(codec, pin_nid, 0x0);
+ hdmi_get_dip_index(codec, pin_nid, &pi, &bi);
if (pi != i)
snd_printd(KERN_INFO "dip index %d: %d != %d\n",
bi, pi, i);
sum += params[i];
ai->checksum = - sum;
- hdmi_set_dip_index(codec, PIN_NID, 0x0, 0x0);
+ hdmi_set_dip_index(codec, pin_nid, 0x0, 0x0);
for (i = 0; i < sizeof(ai); i++)
- hdmi_write_dip_byte(codec, PIN_NID, params[i]);
+ hdmi_write_dip_byte(codec, pin_nid, params[i]);
}
/*
static void hdmi_setup_channel_mapping(struct hda_codec *codec,
struct hdmi_audio_infoframe *ai)
{
+ int i;
+
if (!ai->CA)
return;
* ALSA sequence is front/surr/clfe/side?
*/
- snd_hda_sequence_write(codec, def_chan_map);
+ for (i = 0; i < 8; i++)
+ snd_hda_codec_write(codec, cvt_nid, 0,
+ AC_VERB_SET_HDMI_CHAN_SLOT,
+ (i << 4) | i);
+
hdmi_debug_channel_mapping(codec);
}
.substreams = 1,
.channels_min = 2,
.channels_max = 8,
- .nid = CVT_NID, /* NID to query formats and rates and setup streams */
.ops = {
.open = intel_hdmi_playback_pcm_open,
.close = intel_hdmi_playback_pcm_close,
codec->num_pcms = 1;
codec->pcm_info = info;
+ /* NID to query formats and rates and setup streams */
+ intel_hdmi_pcm_playback.nid = cvt_nid;
+
info->name = "INTEL HDMI";
info->pcm_type = HDA_PCM_TYPE_HDMI;
info->stream[SNDRV_PCM_STREAM_PLAYBACK] = intel_hdmi_pcm_playback;
{
hdmi_enable_output(codec);
- snd_hda_sequence_write(codec, unsolicited_response_verb);
-
+ snd_hda_codec_write(codec, pin_nid, 0,
+ AC_VERB_SET_UNSOLICITED_ENABLE,
+ AC_USRSP_EN | INTEL_HDMI_EVENT_TAG);
return 0;
}
.unsol_event = intel_hdmi_unsol_event,
};
-static int patch_intel_hdmi(struct hda_codec *codec)
+static int do_patch_intel_hdmi(struct hda_codec *codec)
{
struct intel_hdmi_spec *spec;
spec->multiout.num_dacs = 0; /* no analog */
spec->multiout.max_channels = 8;
- spec->multiout.dig_out_nid = CVT_NID;
+ spec->multiout.dig_out_nid = cvt_nid;
codec->spec = spec;
codec->patch_ops = intel_hdmi_patch_ops;
return 0;
}
+static int patch_intel_hdmi(struct hda_codec *codec)
+{
+ cvt_nid = 0x02;
+ pin_nid = 0x03;
+ return do_patch_intel_hdmi(codec);
+}
+
+static int patch_intel_hdmi_ibexpeak(struct hda_codec *codec)
+{
+ cvt_nid = 0x02;
+ pin_nid = 0x04;
+ return do_patch_intel_hdmi(codec);
+}
+
static struct hda_codec_preset snd_hda_preset_intelhdmi[] = {
{ .id = 0x808629fb, .name = "G45 DEVCL", .patch = patch_intel_hdmi },
{ .id = 0x80862801, .name = "G45 DEVBLC", .patch = patch_intel_hdmi },
{ .id = 0x80862802, .name = "G45 DEVCTG", .patch = patch_intel_hdmi },
{ .id = 0x80862803, .name = "G45 DEVELK", .patch = patch_intel_hdmi },
{ .id = 0x80862804, .name = "G45 DEVIBX", .patch = patch_intel_hdmi },
+ { .id = 0x80860054, .name = "Q57 DEVIBX", .patch = patch_intel_hdmi_ibexpeak },
{ .id = 0x10951392, .name = "SiI1392 HDMI", .patch = patch_intel_hdmi },
{} /* terminator */
};
MODULE_ALIAS("snd-hda-codec-id:80862802");
MODULE_ALIAS("snd-hda-codec-id:80862803");
MODULE_ALIAS("snd-hda-codec-id:80862804");
+MODULE_ALIAS("snd-hda-codec-id:80860054");
MODULE_ALIAS("snd-hda-codec-id:10951392");
MODULE_LICENSE("GPL");
*/
static struct hda_codec_preset snd_hda_preset_nvhdmi[] = {
{ .id = 0x10de0002, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch },
+ { .id = 0x10de0003, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch },
{ .id = 0x10de0006, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch },
{ .id = 0x10de0007, .name = "MCP7A HDMI", .patch = patch_nvhdmi_8ch },
{ .id = 0x10de0067, .name = "MCP67 HDMI", .patch = patch_nvhdmi_2ch },
};
MODULE_ALIAS("snd-hda-codec-id:10de0002");
+MODULE_ALIAS("snd-hda-codec-id:10de0003");
MODULE_ALIAS("snd-hda-codec-id:10de0006");
MODULE_ALIAS("snd-hda-codec-id:10de0007");
MODULE_ALIAS("snd-hda-codec-id:10de0067");
ALC885_MBP3,
ALC885_MB5,
ALC885_IMAC24,
- ALC882_AUTO,
- ALC882_MODEL_LAST,
-};
-
-/* ALC883 models */
-enum {
ALC883_3ST_2ch_DIG,
ALC883_3ST_6ch_DIG,
ALC883_3ST_6ch,
ALC888_ACER_ASPIRE_4930G,
ALC888_ACER_ASPIRE_6530G,
ALC888_ACER_ASPIRE_8930G,
+ ALC888_ACER_ASPIRE_7730G,
ALC883_MEDION,
ALC883_MEDION_MD2,
ALC883_LAPTOP_EAPD,
ALC888_3ST_HP,
ALC888_6ST_DELL,
ALC883_MITAC,
+ ALC883_CLEVO_M540R,
ALC883_CLEVO_M720,
ALC883_FUJITSU_PI2515,
ALC888_FUJITSU_XA3530,
ALC883_3ST_6ch_INTEL,
+ ALC889A_INTEL,
+ ALC889_INTEL,
ALC888_ASUS_M90V,
ALC888_ASUS_EEE1601,
ALC889A_MB31,
ALC1200_ASUS_P5Q,
ALC883_SONY_VAIO_TT,
- ALC883_AUTO,
- ALC883_MODEL_LAST,
+ ALC882_AUTO,
+ ALC882_MODEL_LAST,
};
/* for GPIO Poll */
ALC_INIT_GPIO3,
};
+struct alc_mic_route {
+ hda_nid_t pin;
+ unsigned char mux_idx;
+ unsigned char amix_idx;
+};
+
+#define MUX_IDX_UNDEF ((unsigned char)-1)
+
struct alc_spec {
/* codec parameterization */
struct snd_kcontrol_new *mixers[5]; /* mixer arrays */
*/
unsigned int num_init_verbs;
- char stream_name_analog[16]; /* analog PCM stream */
+ char stream_name_analog[32]; /* analog PCM stream */
struct hda_pcm_stream *stream_analog_playback;
struct hda_pcm_stream *stream_analog_capture;
struct hda_pcm_stream *stream_analog_alt_playback;
struct hda_pcm_stream *stream_analog_alt_capture;
- char stream_name_digital[16]; /* digital PCM stream */
+ char stream_name_digital[32]; /* digital PCM stream */
struct hda_pcm_stream *stream_digital_playback;
struct hda_pcm_stream *stream_digital_capture;
unsigned int num_mux_defs;
const struct hda_input_mux *input_mux;
unsigned int cur_mux[3];
+ struct alc_mic_route ext_mic;
+ struct alc_mic_route int_mic;
/* channel model */
const struct hda_channel_mode *channel_mode;
struct snd_array kctls;
struct hda_input_mux private_imux[3];
hda_nid_t private_dac_nids[AUTO_CFG_MAX_OUTS];
+ hda_nid_t private_adc_nids[AUTO_CFG_MAX_OUTS];
+ hda_nid_t private_capsrc_nids[AUTO_CFG_MAX_OUTS];
/* hooks */
void (*init_hook)(struct hda_codec *codec);
unsigned int sense_updated: 1;
unsigned int jack_present: 1;
unsigned int master_sw: 1;
+ unsigned int auto_mic:1;
/* other flags */
unsigned int no_analog :1; /* digital I/O only */
unsigned int num_mux_defs;
const struct hda_input_mux *input_mux;
void (*unsol_event)(struct hda_codec *, unsigned int);
+ void (*setup)(struct hda_codec *);
void (*init_hook)(struct hda_codec *);
#ifdef CONFIG_SND_HDA_POWER_SAVE
struct hda_amp_list *loopbacks;
mux_idx = adc_idx >= spec->num_mux_defs ? 0 : adc_idx;
imux = &spec->input_mux[mux_idx];
- type = (get_wcaps(codec, nid) & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
+ type = get_wcaps_type(get_wcaps(codec, nid));
if (type == AC_WID_AUD_MIX) {
/* Matrix-mixer style (e.g. ALC882) */
unsigned int *cur_val = &spec->cur_mux[adc_idx];
/* Find enumerated value for current pinctl setting */
i = alc_pin_mode_min(dir);
- while (alc_pin_mode_values[i] != pinctl && i <= alc_pin_mode_max(dir))
+ while (i <= alc_pin_mode_max(dir) && alc_pin_mode_values[i] != pinctl)
i++;
*valp = i <= alc_pin_mode_max(dir) ? i: alc_pin_mode_min(dir);
return 0;
/*
* set up from the preset table
*/
-static void setup_preset(struct alc_spec *spec,
+static void setup_preset(struct hda_codec *codec,
const struct alc_config_preset *preset)
{
+ struct alc_spec *spec = codec->spec;
int i;
for (i = 0; i < ARRAY_SIZE(preset->mixers) && preset->mixers[i]; i++)
#ifdef CONFIG_SND_HDA_POWER_SAVE
spec->loopback.amplist = preset->loopbacks;
#endif
+
+ if (preset->setup)
+ preset->setup(codec);
}
/* Enable GPIO mask and set output */
}
}
-#if 0 /* it's broken in some cases -- temporarily disabled */
+static int get_connection_index(struct hda_codec *codec, hda_nid_t mux,
+ hda_nid_t nid)
+{
+ hda_nid_t conn[HDA_MAX_NUM_INPUTS];
+ int i, nums;
+
+ nums = snd_hda_get_connections(codec, mux, conn, ARRAY_SIZE(conn));
+ for (i = 0; i < nums; i++)
+ if (conn[i] == nid)
+ return i;
+ return -1;
+}
+
static void alc_mic_automute(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
- unsigned int present;
- unsigned int mic_nid = spec->autocfg.input_pins[AUTO_PIN_MIC];
- unsigned int fmic_nid = spec->autocfg.input_pins[AUTO_PIN_FRONT_MIC];
- unsigned int mix_nid = spec->capsrc_nids[0];
- unsigned int capsrc_idx_mic, capsrc_idx_fmic;
-
- capsrc_idx_mic = mic_nid - 0x18;
- capsrc_idx_fmic = fmic_nid - 0x18;
- present = snd_hda_codec_read(codec, mic_nid, 0,
- AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
- snd_hda_codec_write(codec, mix_nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
- 0x7000 | (capsrc_idx_mic << 8) | (present ? 0 : 0x80));
- snd_hda_codec_write(codec, mix_nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
- 0x7000 | (capsrc_idx_fmic << 8) | (present ? 0x80 : 0));
- snd_hda_codec_amp_stereo(codec, 0x0b, HDA_INPUT, capsrc_idx_fmic,
- HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
+ struct alc_mic_route *dead, *alive;
+ unsigned int present, type;
+ hda_nid_t cap_nid;
+
+ if (!spec->auto_mic)
+ return;
+ if (!spec->int_mic.pin || !spec->ext_mic.pin)
+ return;
+ if (snd_BUG_ON(!spec->adc_nids))
+ return;
+
+ cap_nid = spec->capsrc_nids ? spec->capsrc_nids[0] : spec->adc_nids[0];
+
+ present = snd_hda_codec_read(codec, spec->ext_mic.pin, 0,
+ AC_VERB_GET_PIN_SENSE, 0);
+ present &= AC_PINSENSE_PRESENCE;
+ if (present) {
+ alive = &spec->ext_mic;
+ dead = &spec->int_mic;
+ } else {
+ alive = &spec->int_mic;
+ dead = &spec->ext_mic;
+ }
+
+ type = get_wcaps_type(get_wcaps(codec, cap_nid));
+ if (type == AC_WID_AUD_MIX) {
+ /* Matrix-mixer style (e.g. ALC882) */
+ snd_hda_codec_amp_stereo(codec, cap_nid, HDA_INPUT,
+ alive->mux_idx,
+ HDA_AMP_MUTE, 0);
+ snd_hda_codec_amp_stereo(codec, cap_nid, HDA_INPUT,
+ dead->mux_idx,
+ HDA_AMP_MUTE, HDA_AMP_MUTE);
+ } else {
+ /* MUX style (e.g. ALC880) */
+ snd_hda_codec_write_cache(codec, cap_nid, 0,
+ AC_VERB_SET_CONNECT_SEL,
+ alive->mux_idx);
+ }
+
+ /* FIXME: analog mixer */
}
-#else
-#define alc_mic_automute(codec) do {} while(0) /* NOP */
-#endif /* disabled */
/* unsolicited event for HP jack sensing */
static void alc_sku_unsol_event(struct hda_codec *codec, unsigned int res)
AC_VERB_SET_PROC_COEF, 0x3030);
}
+static void alc889_coef_init(struct hda_codec *codec)
+{
+ unsigned int tmp;
+
+ snd_hda_codec_write(codec, 0x20, 0, AC_VERB_SET_COEF_INDEX, 7);
+ tmp = snd_hda_codec_read(codec, 0x20, 0, AC_VERB_GET_PROC_COEF, 0);
+ snd_hda_codec_write(codec, 0x20, 0, AC_VERB_SET_COEF_INDEX, 7);
+ snd_hda_codec_write(codec, 0x20, 0, AC_VERB_SET_PROC_COEF, tmp|0x2010);
+}
+
static void alc_auto_init_amp(struct hda_codec *codec, int type)
{
unsigned int tmp;
case 0x10ec0885:
case 0x10ec0887:
case 0x10ec0889:
- snd_hda_codec_write(codec, 0x20, 0,
- AC_VERB_SET_COEF_INDEX, 7);
- tmp = snd_hda_codec_read(codec, 0x20, 0,
- AC_VERB_GET_PROC_COEF, 0);
- snd_hda_codec_write(codec, 0x20, 0,
- AC_VERB_SET_COEF_INDEX, 7);
- snd_hda_codec_write(codec, 0x20, 0,
- AC_VERB_SET_PROC_COEF,
- tmp | 0x2010);
+ alc889_coef_init(codec);
break;
case 0x10ec0888:
alc888_coef_init(codec);
spec->unsol_event = alc_sku_unsol_event;
}
+static void alc_init_auto_mic(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ struct auto_pin_cfg *cfg = &spec->autocfg;
+ hda_nid_t fixed, ext;
+ int i;
+
+ /* there must be only two mic inputs exclusively */
+ for (i = AUTO_PIN_LINE; i < AUTO_PIN_LAST; i++)
+ if (cfg->input_pins[i])
+ return;
+
+ fixed = ext = 0;
+ for (i = AUTO_PIN_MIC; i <= AUTO_PIN_FRONT_MIC; i++) {
+ hda_nid_t nid = cfg->input_pins[i];
+ unsigned int defcfg;
+ if (!nid)
+ return;
+ defcfg = snd_hda_codec_get_pincfg(codec, nid);
+ switch (get_defcfg_connect(defcfg)) {
+ case AC_JACK_PORT_FIXED:
+ if (fixed)
+ return; /* already occupied */
+ fixed = nid;
+ break;
+ case AC_JACK_PORT_COMPLEX:
+ if (ext)
+ return; /* already occupied */
+ ext = nid;
+ break;
+ default:
+ return; /* invalid entry */
+ }
+ }
+ if (!(get_wcaps(codec, ext) & AC_WCAP_UNSOL_CAP))
+ return; /* no unsol support */
+ snd_printdd("realtek: Enable auto-mic switch on NID 0x%x/0x%x\n",
+ ext, fixed);
+ spec->ext_mic.pin = ext;
+ spec->int_mic.pin = fixed;
+ spec->ext_mic.mux_idx = MUX_IDX_UNDEF; /* set later */
+ spec->int_mic.mux_idx = MUX_IDX_UNDEF; /* set later */
+ spec->auto_mic = 1;
+ snd_hda_codec_write_cache(codec, spec->ext_mic.pin, 0,
+ AC_VERB_SET_UNSOLICITED_ENABLE,
+ AC_USRSP_EN | ALC880_MIC_EVENT);
+ spec->unsol_event = alc_sku_unsol_event;
+}
+
/* check subsystem ID and set up device-specific initialization;
* return 1 if initialized, 0 if invalid SSID
*/
}
alc_init_auto_hp(codec);
+ alc_init_auto_mic(codec);
return 1;
}
"Enable default setup for auto mode as fallback\n");
spec->init_amp = ALC_INIT_DEFAULT;
alc_init_auto_hp(codec);
+ alc_init_auto_mic(codec);
}
}
alc_automute_amp(codec);
}
-static void alc888_fujitsu_xa3530_init_hook(struct hda_codec *codec)
+static void alc889_automute_setup(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+
+ spec->autocfg.hp_pins[0] = 0x15;
+ spec->autocfg.speaker_pins[0] = 0x14;
+ spec->autocfg.speaker_pins[1] = 0x16;
+ spec->autocfg.speaker_pins[2] = 0x17;
+ spec->autocfg.speaker_pins[3] = 0x19;
+ spec->autocfg.speaker_pins[4] = 0x1a;
+}
+
+static void alc889_intel_init_hook(struct hda_codec *codec)
+{
+ alc889_coef_init(codec);
+ alc_automute_amp(codec);
+}
+
+static void alc888_fujitsu_xa3530_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[1] = 0x1b; /* hp */
spec->autocfg.speaker_pins[0] = 0x14; /* speaker */
spec->autocfg.speaker_pins[1] = 0x15; /* bass */
- alc_automute_amp(codec);
}
/*
{ } /* end */
};
-static void alc888_acer_aspire_4930g_init_hook(struct hda_codec *codec)
+static void alc888_acer_aspire_4930g_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x15;
spec->autocfg.speaker_pins[0] = 0x14;
- alc_automute_amp(codec);
}
-static void alc888_acer_aspire_6530g_init_hook(struct hda_codec *codec)
+static void alc888_acer_aspire_6530g_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.speaker_pins[0] = 0x14;
spec->autocfg.speaker_pins[1] = 0x16;
spec->autocfg.speaker_pins[2] = 0x17;
- alc_automute_amp(codec);
}
-static void alc889_acer_aspire_8930g_init_hook(struct hda_codec *codec)
+static void alc889_acer_aspire_8930g_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.speaker_pins[0] = 0x14;
spec->autocfg.speaker_pins[1] = 0x16;
spec->autocfg.speaker_pins[2] = 0x1b;
- alc_automute_amp(codec);
}
/*
snd_hda_codec_amp_stereo(codec, 0x0b, HDA_INPUT, 1, HDA_AMP_MUTE, bits);
}
-static void alc880_uniwill_init_hook(struct hda_codec *codec)
+static void alc880_uniwill_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x14;
spec->autocfg.speaker_pins[0] = 0x15;
spec->autocfg.speaker_pins[0] = 0x16;
+}
+
+static void alc880_uniwill_init_hook(struct hda_codec *codec)
+{
alc_automute_amp(codec);
alc880_uniwill_mic_automute(codec);
}
}
}
-static void alc880_uniwill_p53_init_hook(struct hda_codec *codec)
+static void alc880_uniwill_p53_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x14;
spec->autocfg.speaker_pins[0] = 0x15;
- alc_automute_amp(codec);
}
static void alc880_uniwill_p53_dcvol_automute(struct hda_codec *codec)
};
/* toggle speaker-output according to the hp-jack state */
-static void alc880_lg_init_hook(struct hda_codec *codec)
+static void alc880_lg_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x1b;
spec->autocfg.speaker_pins[0] = 0x17;
- alc_automute_amp(codec);
}
/*
};
/* toggle speaker-output according to the hp-jack state */
-static void alc880_lg_lw_init_hook(struct hda_codec *codec)
+static void alc880_lg_lw_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x1b;
spec->autocfg.speaker_pins[0] = 0x14;
- alc_automute_amp(codec);
}
static struct snd_kcontrol_new alc880_medion_rim_mixer[] = {
alc880_medion_rim_automute(codec);
}
-static void alc880_medion_rim_init_hook(struct hda_codec *codec)
+static void alc880_medion_rim_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x14;
spec->autocfg.speaker_pins[0] = 0x1b;
- alc880_medion_rim_automute(codec);
}
#ifdef CONFIG_SND_HDA_POWER_SAVE
.channel_mode = alc880_2_jack_modes,
.input_mux = &alc880_f1734_capture_source,
.unsol_event = alc880_uniwill_p53_unsol_event,
- .init_hook = alc880_uniwill_p53_init_hook,
+ .setup = alc880_uniwill_p53_setup,
+ .init_hook = alc_automute_amp,
},
[ALC880_ASUS] = {
.mixers = { alc880_asus_mixer },
.need_dac_fix = 1,
.input_mux = &alc880_capture_source,
.unsol_event = alc880_uniwill_unsol_event,
+ .setup = alc880_uniwill_setup,
.init_hook = alc880_uniwill_init_hook,
},
[ALC880_UNIWILL_P53] = {
.channel_mode = alc880_threestack_modes,
.input_mux = &alc880_capture_source,
.unsol_event = alc880_uniwill_p53_unsol_event,
- .init_hook = alc880_uniwill_p53_init_hook,
+ .setup = alc880_uniwill_p53_setup,
+ .init_hook = alc_automute_amp,
},
[ALC880_FUJITSU] = {
.mixers = { alc880_fujitsu_mixer },
.channel_mode = alc880_2_jack_modes,
.input_mux = &alc880_capture_source,
.unsol_event = alc880_uniwill_p53_unsol_event,
- .init_hook = alc880_uniwill_p53_init_hook,
+ .setup = alc880_uniwill_p53_setup,
+ .init_hook = alc_automute_amp,
},
[ALC880_CLEVO] = {
.mixers = { alc880_three_stack_mixer },
.need_dac_fix = 1,
.input_mux = &alc880_lg_capture_source,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc880_lg_init_hook,
+ .setup = alc880_lg_setup,
+ .init_hook = alc_automute_amp,
#ifdef CONFIG_SND_HDA_POWER_SAVE
.loopbacks = alc880_lg_loopbacks,
#endif
.channel_mode = alc880_lg_lw_modes,
.input_mux = &alc880_lg_lw_capture_source,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc880_lg_lw_init_hook,
+ .setup = alc880_lg_lw_setup,
+ .init_hook = alc_automute_amp,
},
[ALC880_MEDION_RIM] = {
.mixers = { alc880_medion_rim_mixer },
.channel_mode = alc880_2_jack_modes,
.input_mux = &alc880_medion_rim_capture_source,
.unsol_event = alc880_medion_rim_unsol_event,
- .init_hook = alc880_medion_rim_init_hook,
+ .setup = alc880_medion_rim_setup,
+ .init_hook = alc880_medion_rim_automute,
},
#ifdef CONFIG_SND_DEBUG
[ALC880_TEST] = {
#define alc880_fixed_pin_idx(nid) ((nid) - 0x14)
#define alc880_is_multi_pin(nid) ((nid) >= 0x18)
#define alc880_multi_pin_idx(nid) ((nid) - 0x18)
-#define alc880_is_input_pin(nid) ((nid) >= 0x18)
-#define alc880_input_pin_idx(nid) ((nid) - 0x18)
#define alc880_idx_to_dac(nid) ((nid) + 0x02)
#define alc880_dac_to_idx(nid) ((nid) - 0x02)
#define alc880_idx_to_mixer(nid) ((nid) + 0x0c)
if (err < 0)
return err;
} else {
- sprintf(name, "%s Playback Volume", chname[i]);
+ const char *pfx;
+ if (cfg->line_outs == 1 &&
+ cfg->line_out_type == AUTO_PIN_SPEAKER_OUT)
+ pfx = "Speaker";
+ else
+ pfx = chname[i];
+ sprintf(name, "%s Playback Volume", pfx);
err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
HDA_COMPOSE_AMP_VAL(nid, 3, 0,
HDA_OUTPUT));
if (err < 0)
return err;
- sprintf(name, "%s Playback Switch", chname[i]);
+ sprintf(name, "%s Playback Switch", pfx);
err = add_control(spec, ALC_CTL_BIND_MUTE, name,
HDA_COMPOSE_AMP_VAL(nid, 3, 2,
HDA_INPUT));
return 0;
}
+static int alc_is_input_pin(struct hda_codec *codec, hda_nid_t nid)
+{
+ unsigned int pincap = snd_hda_query_pin_caps(codec, nid);
+ return (pincap & AC_PINCAP_IN) != 0;
+}
+
/* create playback/capture controls for input pins */
-static int alc880_auto_create_analog_input_ctls(struct alc_spec *spec,
- const struct auto_pin_cfg *cfg)
+static int alc_auto_create_input_ctls(struct hda_codec *codec,
+ const struct auto_pin_cfg *cfg,
+ hda_nid_t mixer,
+ hda_nid_t cap1, hda_nid_t cap2)
{
+ struct alc_spec *spec = codec->spec;
struct hda_input_mux *imux = &spec->private_imux[0];
int i, err, idx;
for (i = 0; i < AUTO_PIN_LAST; i++) {
- if (alc880_is_input_pin(cfg->input_pins[i])) {
- idx = alc880_input_pin_idx(cfg->input_pins[i]);
- err = new_analog_input(spec, cfg->input_pins[i],
- auto_pin_cfg_labels[i],
- idx, 0x0b);
- if (err < 0)
- return err;
+ hda_nid_t pin;
+
+ pin = cfg->input_pins[i];
+ if (!alc_is_input_pin(codec, pin))
+ continue;
+
+ if (mixer) {
+ idx = get_connection_index(codec, mixer, pin);
+ if (idx >= 0) {
+ err = new_analog_input(spec, pin,
+ auto_pin_cfg_labels[i],
+ idx, mixer);
+ if (err < 0)
+ return err;
+ }
+ }
+
+ if (!cap1)
+ continue;
+ idx = get_connection_index(codec, cap1, pin);
+ if (idx < 0 && cap2)
+ idx = get_connection_index(codec, cap2, pin);
+ if (idx >= 0) {
imux->items[imux->num_items].label =
auto_pin_cfg_labels[i];
- imux->items[imux->num_items].index =
- alc880_input_pin_idx(cfg->input_pins[i]);
+ imux->items[imux->num_items].index = idx;
imux->num_items++;
}
}
return 0;
}
+static int alc880_auto_create_input_ctls(struct hda_codec *codec,
+ const struct auto_pin_cfg *cfg)
+{
+ return alc_auto_create_input_ctls(codec, cfg, 0x0b, 0x08, 0x09);
+}
+
static void alc_set_pin_output(struct hda_codec *codec, hda_nid_t nid,
unsigned int pin_type)
{
for (i = 0; i < AUTO_PIN_LAST; i++) {
hda_nid_t nid = spec->autocfg.input_pins[i];
- if (alc880_is_input_pin(nid)) {
+ if (alc_is_input_pin(codec, nid)) {
alc_set_input_pin(codec, nid, i);
if (nid != ALC880_PIN_CD_NID &&
(get_wcaps(codec, nid) & AC_WCAP_OUT_AMP))
"Headphone");
if (err < 0)
return err;
- err = alc880_auto_create_analog_input_ctls(spec, &spec->autocfg);
+ err = alc880_auto_create_input_ctls(codec, &spec->autocfg);
if (err < 0)
return err;
alc_inithook(codec);
}
-static void set_capture_mixer(struct alc_spec *spec)
+/* check the ADC/MUX contains all input pins; some ADC/MUX contains only
+ * one of two digital mic pins, e.g. on ALC272
+ */
+static void fixup_automic_adc(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ int i;
+
+ for (i = 0; i < spec->num_adc_nids; i++) {
+ hda_nid_t cap = spec->capsrc_nids ?
+ spec->capsrc_nids[i] : spec->adc_nids[i];
+ int iidx, eidx;
+
+ iidx = get_connection_index(codec, cap, spec->int_mic.pin);
+ if (iidx < 0)
+ continue;
+ eidx = get_connection_index(codec, cap, spec->ext_mic.pin);
+ if (eidx < 0)
+ continue;
+ spec->int_mic.mux_idx = iidx;
+ spec->ext_mic.mux_idx = eidx;
+ if (spec->capsrc_nids)
+ spec->capsrc_nids += i;
+ spec->adc_nids += i;
+ spec->num_adc_nids = 1;
+ return;
+ }
+ snd_printd(KERN_INFO "hda_codec: %s: "
+ "No ADC/MUX containing both 0x%x and 0x%x pins\n",
+ codec->chip_name, spec->int_mic.pin, spec->ext_mic.pin);
+ spec->auto_mic = 0; /* disable auto-mic to be sure */
+}
+
+static void set_capture_mixer(struct hda_codec *codec)
{
+ struct alc_spec *spec = codec->spec;
static struct snd_kcontrol_new *caps[2][3] = {
{ alc_capture_mixer_nosrc1,
alc_capture_mixer_nosrc2,
};
if (spec->num_adc_nids > 0 && spec->num_adc_nids <= 3) {
int mux;
- if (spec->input_mux && spec->input_mux->num_items > 1)
+ if (spec->auto_mic) {
+ mux = 0;
+ fixup_automic_adc(codec);
+ } else if (spec->input_mux && spec->input_mux->num_items > 1)
mux = 1;
else
mux = 0;
alc880_models,
alc880_cfg_tbl);
if (board_config < 0) {
- printk(KERN_INFO "hda_codec: Unknown model for %s, "
- "trying auto-probe from BIOS...\n", codec->chip_name);
+ printk(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
+ codec->chip_name);
board_config = ALC880_AUTO;
}
}
if (board_config != ALC880_AUTO)
- setup_preset(spec, &alc880_presets[board_config]);
+ setup_preset(codec, &alc880_presets[board_config]);
spec->stream_analog_playback = &alc880_pcm_analog_playback;
spec->stream_analog_capture = &alc880_pcm_analog_capture;
/* check whether NID 0x07 is valid */
unsigned int wcap = get_wcaps(codec, alc880_adc_nids[0]);
/* get type */
- wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
+ wcap = get_wcaps_type(wcap);
if (wcap != AC_WID_AUD_IN) {
spec->adc_nids = alc880_adc_nids_alt;
spec->num_adc_nids = ARRAY_SIZE(alc880_adc_nids_alt);
spec->num_adc_nids = ARRAY_SIZE(alc880_adc_nids);
}
}
- set_capture_mixer(spec);
+ set_capture_mixer(codec);
set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
spec->vmaster_nid = 0x0c;
nid = cfg->line_out_pins[0];
if (nid) {
- err = alc260_add_playback_controls(spec, nid, "Front", &vols);
+ const char *pfx;
+ if (!cfg->speaker_pins[0] && !cfg->hp_pins[0])
+ pfx = "Master";
+ else if (cfg->line_out_type == AUTO_PIN_SPEAKER_OUT)
+ pfx = "Speaker";
+ else
+ pfx = "Front";
+ err = alc260_add_playback_controls(spec, nid, pfx, &vols);
if (err < 0)
return err;
}
}
/* create playback/capture controls for input pins */
-static int alc260_auto_create_analog_input_ctls(struct alc_spec *spec,
+static int alc260_auto_create_input_ctls(struct hda_codec *codec,
const struct auto_pin_cfg *cfg)
{
- struct hda_input_mux *imux = &spec->private_imux[0];
- int i, err, idx;
-
- for (i = 0; i < AUTO_PIN_LAST; i++) {
- if (cfg->input_pins[i] >= 0x12) {
- idx = cfg->input_pins[i] - 0x12;
- err = new_analog_input(spec, cfg->input_pins[i],
- auto_pin_cfg_labels[i], idx,
- 0x07);
- if (err < 0)
- return err;
- imux->items[imux->num_items].label =
- auto_pin_cfg_labels[i];
- imux->items[imux->num_items].index = idx;
- imux->num_items++;
- }
- if (cfg->input_pins[i] >= 0x0f && cfg->input_pins[i] <= 0x10){
- idx = cfg->input_pins[i] - 0x09;
- err = new_analog_input(spec, cfg->input_pins[i],
- auto_pin_cfg_labels[i], idx,
- 0x07);
- if (err < 0)
- return err;
- imux->items[imux->num_items].label =
- auto_pin_cfg_labels[i];
- imux->items[imux->num_items].index = idx;
- imux->num_items++;
- }
- }
- return 0;
+ return alc_auto_create_input_ctls(codec, cfg, 0x07, 0x04, 0x05);
}
static void alc260_auto_set_output_and_unmute(struct hda_codec *codec,
return err;
if (!spec->kctls.list)
return 0; /* can't find valid BIOS pin config */
- err = alc260_auto_create_analog_input_ctls(spec, &spec->autocfg);
+ err = alc260_auto_create_input_ctls(codec, &spec->autocfg);
if (err < 0)
return err;
alc260_models,
alc260_cfg_tbl);
if (board_config < 0) {
- snd_printd(KERN_INFO "hda_codec: Unknown model for %s, "
- "trying auto-probe from BIOS...\n",
+ snd_printd(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
codec->chip_name);
board_config = ALC260_AUTO;
}
}
if (board_config != ALC260_AUTO)
- setup_preset(spec, &alc260_presets[board_config]);
+ setup_preset(codec, &alc260_presets[board_config]);
spec->stream_analog_playback = &alc260_pcm_analog_playback;
spec->stream_analog_capture = &alc260_pcm_analog_capture;
if (!spec->adc_nids && spec->input_mux) {
/* check whether NID 0x04 is valid */
unsigned int wcap = get_wcaps(codec, 0x04);
- wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
+ wcap = get_wcaps_type(wcap);
/* get type */
if (wcap != AC_WID_AUD_IN || spec->input_mux->num_items == 1) {
spec->adc_nids = alc260_adc_nids_alt;
spec->num_adc_nids = ARRAY_SIZE(alc260_adc_nids);
}
}
- set_capture_mixer(spec);
+ set_capture_mixer(codec);
set_beep_amp(spec, 0x07, 0x05, HDA_INPUT);
spec->vmaster_nid = 0x08;
/*
- * ALC882 support
+ * ALC882/883/885/888/889 support
*
* ALC882 is almost identical with ALC880 but has cleaner and more flexible
* configuration. Each pin widget can choose any input DACs and a mixer.
*/
#define ALC882_DIGOUT_NID 0x06
#define ALC882_DIGIN_NID 0x0a
+#define ALC883_DIGOUT_NID ALC882_DIGOUT_NID
+#define ALC883_DIGIN_NID ALC882_DIGIN_NID
+#define ALC1200_DIGOUT_NID 0x10
+
static struct hda_channel_mode alc882_ch_modes[1] = {
{ 8, NULL }
};
+/* DACs */
static hda_nid_t alc882_dac_nids[4] = {
/* front, rear, clfe, rear_surr */
0x02, 0x03, 0x04, 0x05
};
+#define alc883_dac_nids alc882_dac_nids
-/* identical with ALC880 */
+/* ADCs */
#define alc882_adc_nids alc880_adc_nids
#define alc882_adc_nids_alt alc880_adc_nids_alt
+#define alc883_adc_nids alc882_adc_nids_alt
+static hda_nid_t alc883_adc_nids_alt[1] = { 0x08 };
+static hda_nid_t alc883_adc_nids_rev[2] = { 0x09, 0x08 };
+#define alc889_adc_nids alc880_adc_nids
static hda_nid_t alc882_capsrc_nids[3] = { 0x24, 0x23, 0x22 };
static hda_nid_t alc882_capsrc_nids_alt[2] = { 0x23, 0x22 };
+#define alc883_capsrc_nids alc882_capsrc_nids_alt
+static hda_nid_t alc883_capsrc_nids_rev[2] = { 0x22, 0x23 };
+#define alc889_capsrc_nids alc882_capsrc_nids
/* input MUX */
/* FIXME: should be a matrix-type input source selection */
},
};
+#define alc883_capture_source alc882_capture_source
+
+static struct hda_input_mux alc889_capture_source = {
+ .num_items = 3,
+ .items = {
+ { "Front Mic", 0x0 },
+ { "Mic", 0x3 },
+ { "Line", 0x2 },
+ },
+};
+
static struct hda_input_mux mb5_capture_source = {
.num_items = 3,
.items = {
},
};
+static struct hda_input_mux alc883_3stack_6ch_intel = {
+ .num_items = 4,
+ .items = {
+ { "Mic", 0x1 },
+ { "Front Mic", 0x0 },
+ { "Line", 0x2 },
+ { "CD", 0x4 },
+ },
+};
+
+static struct hda_input_mux alc883_lenovo_101e_capture_source = {
+ .num_items = 2,
+ .items = {
+ { "Mic", 0x1 },
+ { "Line", 0x2 },
+ },
+};
+
+static struct hda_input_mux alc883_lenovo_nb0763_capture_source = {
+ .num_items = 4,
+ .items = {
+ { "Mic", 0x0 },
+ { "iMic", 0x1 },
+ { "Line", 0x2 },
+ { "CD", 0x4 },
+ },
+};
+
+static struct hda_input_mux alc883_fujitsu_pi2515_capture_source = {
+ .num_items = 2,
+ .items = {
+ { "Mic", 0x0 },
+ { "Int Mic", 0x1 },
+ },
+};
+
+static struct hda_input_mux alc883_lenovo_sky_capture_source = {
+ .num_items = 3,
+ .items = {
+ { "Mic", 0x0 },
+ { "Front Mic", 0x1 },
+ { "Line", 0x4 },
+ },
+};
+
+static struct hda_input_mux alc883_asus_eee1601_capture_source = {
+ .num_items = 2,
+ .items = {
+ { "Mic", 0x0 },
+ { "Line", 0x2 },
+ },
+};
+
+static struct hda_input_mux alc889A_mb31_capture_source = {
+ .num_items = 2,
+ .items = {
+ { "Mic", 0x0 },
+ /* Front Mic (0x01) unused */
+ { "Line", 0x2 },
+ /* Line 2 (0x03) unused */
+ /* CD (0x04) unsused? */
+ },
+};
+
+/*
+ * 2ch mode
+ */
+static struct hda_channel_mode alc883_3ST_2ch_modes[1] = {
+ { 2, NULL }
+};
+
/*
* 2ch mode
*/
{ } /* end */
};
+/*
+ * 4ch mode
+ */
+static struct hda_verb alc882_3ST_ch4_init[] = {
+ { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
+ { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
+ { } /* end */
+};
+
/*
* 6ch mode
*/
{ } /* end */
};
-static struct hda_channel_mode alc882_3ST_6ch_modes[2] = {
+static struct hda_channel_mode alc882_3ST_6ch_modes[3] = {
{ 2, alc882_3ST_ch2_init },
+ { 4, alc882_3ST_ch4_init },
{ 6, alc882_3ST_ch6_init },
};
+#define alc883_3ST_6ch_modes alc882_3ST_6ch_modes
+
+/*
+ * 2ch mode
+ */
+static struct hda_verb alc883_3ST_ch2_clevo_init[] = {
+ { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
+ { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
+ { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
+ { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+ { } /* end */
+};
+
+/*
+ * 4ch mode
+ */
+static struct hda_verb alc883_3ST_ch4_clevo_init[] = {
+ { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
+ { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
+ { } /* end */
+};
+
+/*
+ * 6ch mode
+ */
+static struct hda_verb alc883_3ST_ch6_clevo_init[] = {
+ { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ { 0x18, AC_VERB_SET_CONNECT_SEL, 0x02 },
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
+ { } /* end */
+};
+
+static struct hda_channel_mode alc883_3ST_6ch_clevo_modes[3] = {
+ { 2, alc883_3ST_ch2_clevo_init },
+ { 4, alc883_3ST_ch4_clevo_init },
+ { 6, alc883_3ST_ch6_clevo_init },
+};
+
+
/*
* 6ch mode
*/
};
/*
- * 6ch mode
+ * 4ch mode
*/
-static struct hda_verb alc885_mbp_ch6_init[] = {
+static struct hda_verb alc885_mbp_ch4_init[] = {
{ 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
{ 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{ 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
{ } /* end */
};
-static struct hda_channel_mode alc885_mbp_6ch_modes[2] = {
+static struct hda_channel_mode alc885_mbp_4ch_modes[2] = {
{ 2, alc885_mbp_ch2_init },
- { 6, alc885_mbp_ch6_init },
+ { 4, alc885_mbp_ch4_init },
};
/*
{ 6, alc885_mb5_ch6_init },
};
+
+/*
+ * 2ch mode
+ */
+static struct hda_verb alc883_4ST_ch2_init[] = {
+ { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
+ { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
+ { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+ { } /* end */
+};
+
+/*
+ * 4ch mode
+ */
+static struct hda_verb alc883_4ST_ch4_init[] = {
+ { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
+ { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
+ { } /* end */
+};
+
+/*
+ * 6ch mode
+ */
+static struct hda_verb alc883_4ST_ch6_init[] = {
+ { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ { 0x18, AC_VERB_SET_CONNECT_SEL, 0x02 },
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
+ { } /* end */
+};
+
+/*
+ * 8ch mode
+ */
+static struct hda_verb alc883_4ST_ch8_init[] = {
+ { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ { 0x17, AC_VERB_SET_CONNECT_SEL, 0x03 },
+ { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ { 0x18, AC_VERB_SET_CONNECT_SEL, 0x02 },
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
+ { } /* end */
+};
+
+static struct hda_channel_mode alc883_4ST_8ch_modes[4] = {
+ { 2, alc883_4ST_ch2_init },
+ { 4, alc883_4ST_ch4_init },
+ { 6, alc883_4ST_ch6_init },
+ { 8, alc883_4ST_ch8_init },
+};
+
+
+/*
+ * 2ch mode
+ */
+static struct hda_verb alc883_3ST_ch2_intel_init[] = {
+ { 0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
+ { 0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
+ { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+ { } /* end */
+};
+
+/*
+ * 4ch mode
+ */
+static struct hda_verb alc883_3ST_ch4_intel_init[] = {
+ { 0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
+ { 0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
+ { } /* end */
+};
+
+/*
+ * 6ch mode
+ */
+static struct hda_verb alc883_3ST_ch6_intel_init[] = {
+ { 0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ { 0x19, AC_VERB_SET_CONNECT_SEL, 0x02 },
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
+ { } /* end */
+};
+
+static struct hda_channel_mode alc883_3ST_6ch_intel_modes[3] = {
+ { 2, alc883_3ST_ch2_intel_init },
+ { 4, alc883_3ST_ch4_intel_init },
+ { 6, alc883_3ST_ch6_intel_init },
+};
+
+/*
+ * 2ch mode
+ */
+static struct hda_verb alc889_ch2_intel_init[] = {
+ { 0x14, AC_VERB_SET_CONNECT_SEL, 0x00 },
+ { 0x19, AC_VERB_SET_CONNECT_SEL, 0x00 },
+ { 0x16, AC_VERB_SET_CONNECT_SEL, 0x00 },
+ { 0x17, AC_VERB_SET_CONNECT_SEL, 0x00 },
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
+ { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+ { } /* end */
+};
+
+/*
+ * 6ch mode
+ */
+static struct hda_verb alc889_ch6_intel_init[] = {
+ { 0x14, AC_VERB_SET_CONNECT_SEL, 0x00 },
+ { 0x19, AC_VERB_SET_CONNECT_SEL, 0x01 },
+ { 0x16, AC_VERB_SET_CONNECT_SEL, 0x02 },
+ { 0x17, AC_VERB_SET_CONNECT_SEL, 0x03 },
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
+ { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+ { } /* end */
+};
+
+/*
+ * 8ch mode
+ */
+static struct hda_verb alc889_ch8_intel_init[] = {
+ { 0x14, AC_VERB_SET_CONNECT_SEL, 0x00 },
+ { 0x19, AC_VERB_SET_CONNECT_SEL, 0x01 },
+ { 0x16, AC_VERB_SET_CONNECT_SEL, 0x02 },
+ { 0x17, AC_VERB_SET_CONNECT_SEL, 0x03 },
+ { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x03 },
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ { } /* end */
+};
+
+static struct hda_channel_mode alc889_8ch_intel_modes[3] = {
+ { 2, alc889_ch2_intel_init },
+ { 6, alc889_ch6_intel_init },
+ { 8, alc889_ch8_intel_init },
+};
+
+/*
+ * 6ch mode
+ */
+static struct hda_verb alc883_sixstack_ch6_init[] = {
+ { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 },
+ { 0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { } /* end */
+};
+
+/*
+ * 8ch mode
+ */
+static struct hda_verb alc883_sixstack_ch8_init[] = {
+ { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { } /* end */
+};
+
+static struct hda_channel_mode alc883_sixstack_modes[2] = {
+ { 6, alc883_sixstack_ch6_init },
+ { 8, alc883_sixstack_ch8_init },
+};
+
+
/* Pin assignment: Front=0x14, Rear=0x15, CLFE=0x16, Side=0x17
* Mic=0x18, Front Mic=0x19, Line-In=0x1a, HP=0x1b
*/
};
static struct snd_kcontrol_new alc885_mbp3_mixer[] = {
- HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x00, HDA_OUTPUT),
- HDA_BIND_MUTE ("Front Playback Switch", 0x0c, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE ("Speaker Playback Switch", 0x14, 0x00, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Line-Out Playback Volume", 0x0d, 0x00, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("Speaker Playback Volume", 0x0c, 0x00, HDA_OUTPUT),
+ HDA_BIND_MUTE ("Speaker Playback Switch", 0x0c, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0e, 0x00, HDA_OUTPUT),
+ HDA_BIND_MUTE ("Headphone Playback Switch", 0x0e, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x00, HDA_OUTPUT),
HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
HDA_CODEC_MUTE ("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x00, HDA_INPUT),
{ } /* end */
};
-static struct hda_verb alc882_init_verbs[] = {
+static struct hda_verb alc882_base_init_verbs[] = {
/* Front mixer: unmute input/output amp left and right (volume = 0) */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ /* mute analog input loopbacks */
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+
/* Front Pin: output 0 (0x0c) */
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* FIXME: use matrix-type input source selection */
/* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
- /* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
/* Input mixer2 */
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
- /* ADC1: mute amp left and right */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
/* ADC2: mute amp left and right */
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
{ }
};
+static struct hda_verb alc882_adc1_init_verbs[] = {
+ /* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+ /* ADC1: mute amp left and right */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
+ { }
+};
+
static struct hda_verb alc882_eapd_verbs[] = {
/* change to EAPD mode */
{0x20, AC_VERB_SET_COEF_INDEX, 0x07},
{ }
};
-/* Mac Pro test */
-static struct snd_kcontrol_new alc882_macpro_mixer[] = {
- HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x18, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x01, HDA_INPUT),
- HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x01, HDA_INPUT),
- /* FIXME: this looks suspicious...
- HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x02, HDA_INPUT),
- */
- { } /* end */
+static struct hda_verb alc889_eapd_verbs[] = {
+ {0x14, AC_VERB_SET_EAPD_BTLENABLE, 2},
+ {0x15, AC_VERB_SET_EAPD_BTLENABLE, 2},
+ { }
};
-static struct hda_verb alc882_macpro_init_verbs[] = {
+static struct hda_verb alc_hp15_unsol_verbs[] = {
+ {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT},
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {}
+};
+
+static struct hda_verb alc885_init_verbs[] = {
+ /* Front mixer: unmute input/output amp left and right (volume = 0) */
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ /* Rear mixer */
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ /* CLFE mixer */
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ /* Side mixer */
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+
+ /* mute analog input loopbacks */
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+
+ /* Front HP Pin: output 0 (0x0c) */
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
+ /* Front Pin: output 0 (0x0c) */
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
+ /* Rear Pin: output 1 (0x0d) */
+ {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x19, AC_VERB_SET_CONNECT_SEL, 0x01},
+ /* CLFE Pin: output 2 (0x0e) */
+ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x16, AC_VERB_SET_CONNECT_SEL, 0x02},
+ /* Side Pin: output 3 (0x0f) */
+ {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x17, AC_VERB_SET_CONNECT_SEL, 0x03},
+ /* Mic (rear) pin: input vref at 80% */
+ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* Front Mic pin: input vref at 80% */
+ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* Line In pin: input */
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+
+ /* Mixer elements: 0x18, , 0x1a, 0x1b */
+ /* Input mixer1 */
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ /* Input mixer2 */
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+ /* Input mixer3 */
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+ /* ADC2: mute amp left and right */
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ /* ADC3: mute amp left and right */
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+
+ { }
+};
+
+static struct hda_verb alc885_init_input_verbs[] = {
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
+ { }
+};
+
+
+/* Unmute Selector 24h and set the default input to front mic */
+static struct hda_verb alc889_init_input_verbs[] = {
+ {0x24, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ { }
+};
+
+
+#define alc883_init_verbs alc882_base_init_verbs
+
+/* Mac Pro test */
+static struct snd_kcontrol_new alc882_macpro_mixer[] = {
+ HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x18, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x01, HDA_INPUT),
+ HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x01, HDA_INPUT),
+ /* FIXME: this looks suspicious...
+ HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x02, HDA_INPUT),
+ HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x02, HDA_INPUT),
+ */
+ { } /* end */
+};
+
+static struct hda_verb alc882_macpro_init_verbs[] = {
/* Front mixer: unmute input/output amp left and right (volume = 0) */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ /* HP mixer */
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
/* Front Pin: output 0 (0x0c) */
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* HP Pin: output 0 (0x0d) */
+ /* HP Pin: output 0 (0x0e) */
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc4},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- {0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x15, AC_VERB_SET_CONNECT_SEL, 0x02},
{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
/* Mic (rear) pin: input vref at 80% */
{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
};
/* Toggle speaker-output according to the hp-jack state */
-static void alc885_imac24_automute_init_hook(struct hda_codec *codec)
+static void alc885_imac24_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x14;
spec->autocfg.speaker_pins[0] = 0x18;
spec->autocfg.speaker_pins[1] = 0x1a;
- alc_automute_amp(codec);
}
-static void alc885_mbp3_init_hook(struct hda_codec *codec)
+static void alc885_mbp3_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x15;
spec->autocfg.speaker_pins[0] = 0x14;
- alc_automute_amp(codec);
}
spec->jack_present ? 1 : 3);
}
-static void alc882_targa_init_hook(struct hda_codec *codec)
+static void alc882_targa_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x14;
spec->autocfg.speaker_pins[0] = 0x1b;
- alc882_targa_automute(codec);
}
static void alc882_targa_unsol_event(struct hda_codec *codec, unsigned int res)
snd_hda_codec_write(codec, codec->afg, 0,
AC_VERB_SET_GPIO_DIRECTION, gpiodir);
- msleep(1);
-
- snd_hda_codec_write(codec, codec->afg, 0,
- AC_VERB_SET_GPIO_DATA, gpiostate);
-}
-
-/* set up GPIO at initialization */
-static void alc885_macpro_init_hook(struct hda_codec *codec)
-{
- alc882_gpio_mute(codec, 0, 0);
- alc882_gpio_mute(codec, 1, 0);
-}
-
-/* set up GPIO and update auto-muting at initialization */
-static void alc885_imac24_init_hook(struct hda_codec *codec)
-{
- alc885_macpro_init_hook(codec);
- alc885_imac24_automute_init_hook(codec);
-}
-
-/*
- * generic initialization of ADC, input mixers and output mixers
- */
-static struct hda_verb alc882_auto_init_verbs[] = {
- /*
- * Unmute ADC0-2 and set the default input to mic-in
- */
- {0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-
- /* Mute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
- * mixer widget
- * Note: PASD motherboards uses the Line In 2 as the input for
- * front panel mic (mic 2)
- */
- /* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
-
- /*
- * Set up output mixers (0x0c - 0x0f)
- */
- /* set vol=0 to output mixers */
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- /* set up input amps for analog loopback */
- /* Amp Indices: DAC = 0, mixer = 1 */
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x26, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x26, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
-
- /* FIXME: use matrix-type input source selection */
- /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
- /* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
- /* Input mixer2 */
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
- /* Input mixer3 */
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
-
- { }
-};
-
-#ifdef CONFIG_SND_HDA_POWER_SAVE
-#define alc882_loopbacks alc880_loopbacks
-#endif
-
-/* pcm configuration: identical with ALC880 */
-#define alc882_pcm_analog_playback alc880_pcm_analog_playback
-#define alc882_pcm_analog_capture alc880_pcm_analog_capture
-#define alc882_pcm_digital_playback alc880_pcm_digital_playback
-#define alc882_pcm_digital_capture alc880_pcm_digital_capture
-
-/*
- * configuration and preset
- */
-static const char *alc882_models[ALC882_MODEL_LAST] = {
- [ALC882_3ST_DIG] = "3stack-dig",
- [ALC882_6ST_DIG] = "6stack-dig",
- [ALC882_ARIMA] = "arima",
- [ALC882_W2JC] = "w2jc",
- [ALC882_TARGA] = "targa",
- [ALC882_ASUS_A7J] = "asus-a7j",
- [ALC882_ASUS_A7M] = "asus-a7m",
- [ALC885_MACPRO] = "macpro",
- [ALC885_MB5] = "mb5",
- [ALC885_MBP3] = "mbp3",
- [ALC885_IMAC24] = "imac24",
- [ALC882_AUTO] = "auto",
-};
-
-static struct snd_pci_quirk alc882_cfg_tbl[] = {
- SND_PCI_QUIRK(0x1019, 0x6668, "ECS", ALC882_6ST_DIG),
- SND_PCI_QUIRK(0x1043, 0x060d, "Asus A7J", ALC882_ASUS_A7J),
- SND_PCI_QUIRK(0x1043, 0x1243, "Asus A7J", ALC882_ASUS_A7J),
- SND_PCI_QUIRK(0x1043, 0x13c2, "Asus A7M", ALC882_ASUS_A7M),
- SND_PCI_QUIRK(0x1043, 0x1971, "Asus W2JC", ALC882_W2JC),
- SND_PCI_QUIRK(0x1043, 0x817f, "Asus P5LD2", ALC882_6ST_DIG),
- SND_PCI_QUIRK(0x1043, 0x81d8, "Asus P5WD", ALC882_6ST_DIG),
- SND_PCI_QUIRK(0x105b, 0x6668, "Foxconn", ALC882_6ST_DIG),
- SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte P35 DS3R", ALC882_6ST_DIG),
- SND_PCI_QUIRK(0x1462, 0x28fb, "Targa T8", ALC882_TARGA), /* MSI-1049 T8 */
- SND_PCI_QUIRK(0x1462, 0x6668, "MSI", ALC882_6ST_DIG),
- SND_PCI_QUIRK(0x161f, 0x2054, "Arima W820", ALC882_ARIMA),
- {}
-};
-
-static struct alc_config_preset alc882_presets[] = {
- [ALC882_3ST_DIG] = {
- .mixers = { alc882_base_mixer },
- .init_verbs = { alc882_init_verbs },
- .num_dacs = ARRAY_SIZE(alc882_dac_nids),
- .dac_nids = alc882_dac_nids,
- .dig_out_nid = ALC882_DIGOUT_NID,
- .dig_in_nid = ALC882_DIGIN_NID,
- .num_channel_mode = ARRAY_SIZE(alc882_ch_modes),
- .channel_mode = alc882_ch_modes,
- .need_dac_fix = 1,
- .input_mux = &alc882_capture_source,
- },
- [ALC882_6ST_DIG] = {
- .mixers = { alc882_base_mixer, alc882_chmode_mixer },
- .init_verbs = { alc882_init_verbs },
- .num_dacs = ARRAY_SIZE(alc882_dac_nids),
- .dac_nids = alc882_dac_nids,
- .dig_out_nid = ALC882_DIGOUT_NID,
- .dig_in_nid = ALC882_DIGIN_NID,
- .num_channel_mode = ARRAY_SIZE(alc882_sixstack_modes),
- .channel_mode = alc882_sixstack_modes,
- .input_mux = &alc882_capture_source,
- },
- [ALC882_ARIMA] = {
- .mixers = { alc882_base_mixer, alc882_chmode_mixer },
- .init_verbs = { alc882_init_verbs, alc882_eapd_verbs },
- .num_dacs = ARRAY_SIZE(alc882_dac_nids),
- .dac_nids = alc882_dac_nids,
- .num_channel_mode = ARRAY_SIZE(alc882_sixstack_modes),
- .channel_mode = alc882_sixstack_modes,
- .input_mux = &alc882_capture_source,
- },
- [ALC882_W2JC] = {
- .mixers = { alc882_w2jc_mixer, alc882_chmode_mixer },
- .init_verbs = { alc882_init_verbs, alc882_eapd_verbs,
- alc880_gpio1_init_verbs },
- .num_dacs = ARRAY_SIZE(alc882_dac_nids),
- .dac_nids = alc882_dac_nids,
- .num_channel_mode = ARRAY_SIZE(alc880_threestack_modes),
- .channel_mode = alc880_threestack_modes,
- .need_dac_fix = 1,
- .input_mux = &alc882_capture_source,
- .dig_out_nid = ALC882_DIGOUT_NID,
- },
- [ALC885_MBP3] = {
- .mixers = { alc885_mbp3_mixer, alc882_chmode_mixer },
- .init_verbs = { alc885_mbp3_init_verbs,
- alc880_gpio1_init_verbs },
- .num_dacs = ARRAY_SIZE(alc882_dac_nids),
- .dac_nids = alc882_dac_nids,
- .channel_mode = alc885_mbp_6ch_modes,
- .num_channel_mode = ARRAY_SIZE(alc885_mbp_6ch_modes),
- .input_mux = &alc882_capture_source,
- .dig_out_nid = ALC882_DIGOUT_NID,
- .dig_in_nid = ALC882_DIGIN_NID,
- .unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc885_mbp3_init_hook,
- },
- [ALC885_MB5] = {
- .mixers = { alc885_mb5_mixer, alc882_chmode_mixer },
- .init_verbs = { alc885_mb5_init_verbs,
- alc880_gpio1_init_verbs },
- .num_dacs = ARRAY_SIZE(alc882_dac_nids),
- .dac_nids = alc882_dac_nids,
- .channel_mode = alc885_mb5_6ch_modes,
- .num_channel_mode = ARRAY_SIZE(alc885_mb5_6ch_modes),
- .input_mux = &mb5_capture_source,
- .dig_out_nid = ALC882_DIGOUT_NID,
- .dig_in_nid = ALC882_DIGIN_NID,
- },
- [ALC885_MACPRO] = {
- .mixers = { alc882_macpro_mixer },
- .init_verbs = { alc882_macpro_init_verbs },
- .num_dacs = ARRAY_SIZE(alc882_dac_nids),
- .dac_nids = alc882_dac_nids,
- .dig_out_nid = ALC882_DIGOUT_NID,
- .dig_in_nid = ALC882_DIGIN_NID,
- .num_channel_mode = ARRAY_SIZE(alc882_ch_modes),
- .channel_mode = alc882_ch_modes,
- .input_mux = &alc882_capture_source,
- .init_hook = alc885_macpro_init_hook,
- },
- [ALC885_IMAC24] = {
- .mixers = { alc885_imac24_mixer },
- .init_verbs = { alc885_imac24_init_verbs },
- .num_dacs = ARRAY_SIZE(alc882_dac_nids),
- .dac_nids = alc882_dac_nids,
- .dig_out_nid = ALC882_DIGOUT_NID,
- .dig_in_nid = ALC882_DIGIN_NID,
- .num_channel_mode = ARRAY_SIZE(alc882_ch_modes),
- .channel_mode = alc882_ch_modes,
- .input_mux = &alc882_capture_source,
- .unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc885_imac24_init_hook,
- },
- [ALC882_TARGA] = {
- .mixers = { alc882_targa_mixer, alc882_chmode_mixer },
- .init_verbs = { alc882_init_verbs, alc880_gpio3_init_verbs,
- alc882_targa_verbs},
- .num_dacs = ARRAY_SIZE(alc882_dac_nids),
- .dac_nids = alc882_dac_nids,
- .dig_out_nid = ALC882_DIGOUT_NID,
- .num_adc_nids = ARRAY_SIZE(alc882_adc_nids),
- .adc_nids = alc882_adc_nids,
- .capsrc_nids = alc882_capsrc_nids,
- .num_channel_mode = ARRAY_SIZE(alc882_3ST_6ch_modes),
- .channel_mode = alc882_3ST_6ch_modes,
- .need_dac_fix = 1,
- .input_mux = &alc882_capture_source,
- .unsol_event = alc882_targa_unsol_event,
- .init_hook = alc882_targa_init_hook,
- },
- [ALC882_ASUS_A7J] = {
- .mixers = { alc882_asus_a7j_mixer, alc882_chmode_mixer },
- .init_verbs = { alc882_init_verbs, alc882_asus_a7j_verbs},
- .num_dacs = ARRAY_SIZE(alc882_dac_nids),
- .dac_nids = alc882_dac_nids,
- .dig_out_nid = ALC882_DIGOUT_NID,
- .num_adc_nids = ARRAY_SIZE(alc882_adc_nids),
- .adc_nids = alc882_adc_nids,
- .capsrc_nids = alc882_capsrc_nids,
- .num_channel_mode = ARRAY_SIZE(alc882_3ST_6ch_modes),
- .channel_mode = alc882_3ST_6ch_modes,
- .need_dac_fix = 1,
- .input_mux = &alc882_capture_source,
- },
- [ALC882_ASUS_A7M] = {
- .mixers = { alc882_asus_a7m_mixer, alc882_chmode_mixer },
- .init_verbs = { alc882_init_verbs, alc882_eapd_verbs,
- alc880_gpio1_init_verbs,
- alc882_asus_a7m_verbs },
- .num_dacs = ARRAY_SIZE(alc882_dac_nids),
- .dac_nids = alc882_dac_nids,
- .dig_out_nid = ALC882_DIGOUT_NID,
- .num_channel_mode = ARRAY_SIZE(alc880_threestack_modes),
- .channel_mode = alc880_threestack_modes,
- .need_dac_fix = 1,
- .input_mux = &alc882_capture_source,
- },
-};
-
-
-/*
- * Pin config fixes
- */
-enum {
- PINFIX_ABIT_AW9D_MAX
-};
-
-static struct alc_pincfg alc882_abit_aw9d_pinfix[] = {
- { 0x15, 0x01080104 }, /* side */
- { 0x16, 0x01011012 }, /* rear */
- { 0x17, 0x01016011 }, /* clfe */
- { }
-};
-
-static const struct alc_pincfg *alc882_pin_fixes[] = {
- [PINFIX_ABIT_AW9D_MAX] = alc882_abit_aw9d_pinfix,
-};
-
-static struct snd_pci_quirk alc882_pinfix_tbl[] = {
- SND_PCI_QUIRK(0x147b, 0x107a, "Abit AW9D-MAX", PINFIX_ABIT_AW9D_MAX),
- {}
-};
-
-/*
- * BIOS auto configuration
- */
-static void alc882_auto_set_output_and_unmute(struct hda_codec *codec,
- hda_nid_t nid, int pin_type,
- int dac_idx)
-{
- /* set as output */
- struct alc_spec *spec = codec->spec;
- int idx;
-
- alc_set_pin_output(codec, nid, pin_type);
- if (spec->multiout.dac_nids[dac_idx] == 0x25)
- idx = 4;
- else
- idx = spec->multiout.dac_nids[dac_idx] - 2;
- snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_CONNECT_SEL, idx);
-
-}
-
-static void alc882_auto_init_multi_out(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
- int i;
-
- for (i = 0; i <= HDA_SIDE; i++) {
- hda_nid_t nid = spec->autocfg.line_out_pins[i];
- int pin_type = get_pin_type(spec->autocfg.line_out_type);
- if (nid)
- alc882_auto_set_output_and_unmute(codec, nid, pin_type,
- i);
- }
-}
-
-static void alc882_auto_init_hp_out(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
- hda_nid_t pin;
-
- pin = spec->autocfg.hp_pins[0];
- if (pin) /* connect to front */
- /* use dac 0 */
- alc882_auto_set_output_and_unmute(codec, pin, PIN_HP, 0);
- pin = spec->autocfg.speaker_pins[0];
- if (pin)
- alc882_auto_set_output_and_unmute(codec, pin, PIN_OUT, 0);
-}
-
-#define alc882_is_input_pin(nid) alc880_is_input_pin(nid)
-#define ALC882_PIN_CD_NID ALC880_PIN_CD_NID
-
-static void alc882_auto_init_analog_input(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
- int i;
-
- for (i = 0; i < AUTO_PIN_LAST; i++) {
- hda_nid_t nid = spec->autocfg.input_pins[i];
- if (!nid)
- continue;
- alc_set_input_pin(codec, nid, AUTO_PIN_FRONT_MIC /*i*/);
- if (get_wcaps(codec, nid) & AC_WCAP_OUT_AMP)
- snd_hda_codec_write(codec, nid, 0,
- AC_VERB_SET_AMP_GAIN_MUTE,
- AMP_OUT_MUTE);
- }
-}
-
-static void alc882_auto_init_input_src(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
- int c;
-
- for (c = 0; c < spec->num_adc_nids; c++) {
- hda_nid_t conn_list[HDA_MAX_NUM_INPUTS];
- hda_nid_t nid = spec->capsrc_nids[c];
- unsigned int mux_idx;
- const struct hda_input_mux *imux;
- int conns, mute, idx, item;
-
- conns = snd_hda_get_connections(codec, nid, conn_list,
- ARRAY_SIZE(conn_list));
- if (conns < 0)
- continue;
- mux_idx = c >= spec->num_mux_defs ? 0 : c;
- imux = &spec->input_mux[mux_idx];
- for (idx = 0; idx < conns; idx++) {
- /* if the current connection is the selected one,
- * unmute it as default - otherwise mute it
- */
- mute = AMP_IN_MUTE(idx);
- for (item = 0; item < imux->num_items; item++) {
- if (imux->items[item].index == idx) {
- if (spec->cur_mux[c] == item)
- mute = AMP_IN_UNMUTE(idx);
- break;
- }
- }
- /* check if we have a selector or mixer
- * we could check for the widget type instead, but
- * just check for Amp-In presence (in case of mixer
- * without amp-in there is something wrong, this
- * function shouldn't be used or capsrc nid is wrong)
- */
- if (get_wcaps(codec, nid) & AC_WCAP_IN_AMP)
- snd_hda_codec_write(codec, nid, 0,
- AC_VERB_SET_AMP_GAIN_MUTE,
- mute);
- else if (mute != AMP_IN_MUTE(idx))
- snd_hda_codec_write(codec, nid, 0,
- AC_VERB_SET_CONNECT_SEL,
- idx);
- }
- }
-}
-
-/* add mic boosts if needed */
-static int alc_auto_add_mic_boost(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
- int err;
- hda_nid_t nid;
-
- nid = spec->autocfg.input_pins[AUTO_PIN_MIC];
- if (nid && (get_wcaps(codec, nid) & AC_WCAP_IN_AMP)) {
- err = add_control(spec, ALC_CTL_WIDGET_VOL,
- "Mic Boost",
- HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_INPUT));
- if (err < 0)
- return err;
- }
- nid = spec->autocfg.input_pins[AUTO_PIN_FRONT_MIC];
- if (nid && (get_wcaps(codec, nid) & AC_WCAP_IN_AMP)) {
- err = add_control(spec, ALC_CTL_WIDGET_VOL,
- "Front Mic Boost",
- HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_INPUT));
- if (err < 0)
- return err;
- }
- return 0;
-}
-
-/* almost identical with ALC880 parser... */
-static int alc882_parse_auto_config(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
- int err = alc880_parse_auto_config(codec);
-
- if (err < 0)
- return err;
- else if (!err)
- return 0; /* no config found */
-
- err = alc_auto_add_mic_boost(codec);
- if (err < 0)
- return err;
-
- /* hack - override the init verbs */
- spec->init_verbs[0] = alc882_auto_init_verbs;
-
- return 1; /* config found */
-}
-
-/* additional initialization for auto-configuration model */
-static void alc882_auto_init(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
- alc882_auto_init_multi_out(codec);
- alc882_auto_init_hp_out(codec);
- alc882_auto_init_analog_input(codec);
- alc882_auto_init_input_src(codec);
- if (spec->unsol_event)
- alc_inithook(codec);
-}
-
-static int patch_alc883(struct hda_codec *codec); /* called in patch_alc882() */
-
-static int patch_alc882(struct hda_codec *codec)
-{
- struct alc_spec *spec;
- int err, board_config;
-
- spec = kzalloc(sizeof(*spec), GFP_KERNEL);
- if (spec == NULL)
- return -ENOMEM;
-
- codec->spec = spec;
-
- board_config = snd_hda_check_board_config(codec, ALC882_MODEL_LAST,
- alc882_models,
- alc882_cfg_tbl);
-
- if (board_config < 0 || board_config >= ALC882_MODEL_LAST) {
- /* Pick up systems that don't supply PCI SSID */
- switch (codec->subsystem_id) {
- case 0x106b0c00: /* Mac Pro */
- board_config = ALC885_MACPRO;
- break;
- case 0x106b1000: /* iMac 24 */
- case 0x106b2800: /* AppleTV */
- case 0x106b3e00: /* iMac 24 Aluminium */
- board_config = ALC885_IMAC24;
- break;
- case 0x106b00a0: /* MacBookPro3,1 - Another revision */
- case 0x106b00a1: /* Macbook (might be wrong - PCI SSID?) */
- case 0x106b00a4: /* MacbookPro4,1 */
- case 0x106b2c00: /* Macbook Pro rev3 */
- /* Macbook 3.1 (0x106b3600) is handled by patch_alc883() */
- case 0x106b3800: /* MacbookPro4,1 - latter revision */
- board_config = ALC885_MBP3;
- break;
- case 0x106b3f00: /* Macbook 5,1 */
- case 0x106b4000: /* Macbook Pro 5,1 - FIXME: HP jack sense
- * seems not working, so apparently
- * no perfect solution yet
- */
- board_config = ALC885_MB5;
- break;
- default:
- /* ALC889A is handled better as ALC888-compatible */
- if (codec->revision_id == 0x100101 ||
- codec->revision_id == 0x100103) {
- alc_free(codec);
- return patch_alc883(codec);
- }
- printk(KERN_INFO "hda_codec: Unknown model for %s, "
- "trying auto-probe from BIOS...\n",
- codec->chip_name);
- board_config = ALC882_AUTO;
- }
- }
-
- alc_fix_pincfg(codec, alc882_pinfix_tbl, alc882_pin_fixes);
-
- if (board_config == ALC882_AUTO) {
- /* automatic parse from the BIOS config */
- err = alc882_parse_auto_config(codec);
- if (err < 0) {
- alc_free(codec);
- return err;
- } else if (!err) {
- printk(KERN_INFO
- "hda_codec: Cannot set up configuration "
- "from BIOS. Using base mode...\n");
- board_config = ALC882_3ST_DIG;
- }
- }
-
- err = snd_hda_attach_beep_device(codec, 0x1);
- if (err < 0) {
- alc_free(codec);
- return err;
- }
-
- if (board_config != ALC882_AUTO)
- setup_preset(spec, &alc882_presets[board_config]);
-
- spec->stream_analog_playback = &alc882_pcm_analog_playback;
- spec->stream_analog_capture = &alc882_pcm_analog_capture;
- /* FIXME: setup DAC5 */
- /*spec->stream_analog_alt_playback = &alc880_pcm_analog_alt_playback;*/
- spec->stream_analog_alt_capture = &alc880_pcm_analog_alt_capture;
-
- spec->stream_digital_playback = &alc882_pcm_digital_playback;
- spec->stream_digital_capture = &alc882_pcm_digital_capture;
-
- if (!spec->adc_nids && spec->input_mux) {
- /* check whether NID 0x07 is valid */
- unsigned int wcap = get_wcaps(codec, 0x07);
- /* get type */
- wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
- if (wcap != AC_WID_AUD_IN) {
- spec->adc_nids = alc882_adc_nids_alt;
- spec->num_adc_nids = ARRAY_SIZE(alc882_adc_nids_alt);
- spec->capsrc_nids = alc882_capsrc_nids_alt;
- } else {
- spec->adc_nids = alc882_adc_nids;
- spec->num_adc_nids = ARRAY_SIZE(alc882_adc_nids);
- spec->capsrc_nids = alc882_capsrc_nids;
- }
- }
- set_capture_mixer(spec);
- set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
-
- spec->vmaster_nid = 0x0c;
-
- codec->patch_ops = alc_patch_ops;
- if (board_config == ALC882_AUTO)
- spec->init_hook = alc882_auto_init;
-#ifdef CONFIG_SND_HDA_POWER_SAVE
- if (!spec->loopback.amplist)
- spec->loopback.amplist = alc882_loopbacks;
-#endif
- codec->proc_widget_hook = print_realtek_coef;
-
- return 0;
-}
-
-/*
- * ALC883 support
- *
- * ALC883 is almost identical with ALC880 but has cleaner and more flexible
- * configuration. Each pin widget can choose any input DACs and a mixer.
- * Each ADC is connected from a mixer of all inputs. This makes possible
- * 6-channel independent captures.
- *
- * In addition, an independent DAC for the multi-playback (not used in this
- * driver yet).
- */
-#define ALC883_DIGOUT_NID 0x06
-#define ALC883_DIGIN_NID 0x0a
-
-#define ALC1200_DIGOUT_NID 0x10
-
-static hda_nid_t alc883_dac_nids[4] = {
- /* front, rear, clfe, rear_surr */
- 0x02, 0x03, 0x04, 0x05
-};
-
-static hda_nid_t alc883_adc_nids[2] = {
- /* ADC1-2 */
- 0x08, 0x09,
-};
-
-static hda_nid_t alc883_adc_nids_alt[1] = {
- /* ADC1 */
- 0x08,
-};
-
-static hda_nid_t alc883_adc_nids_rev[2] = {
- /* ADC2-1 */
- 0x09, 0x08
-};
-
-#define alc889_adc_nids alc880_adc_nids
-
-static hda_nid_t alc883_capsrc_nids[2] = { 0x23, 0x22 };
-
-static hda_nid_t alc883_capsrc_nids_rev[2] = { 0x22, 0x23 };
-
-#define alc889_capsrc_nids alc882_capsrc_nids
-
-/* input MUX */
-/* FIXME: should be a matrix-type input source selection */
-
-static struct hda_input_mux alc883_capture_source = {
- .num_items = 4,
- .items = {
- { "Mic", 0x0 },
- { "Front Mic", 0x1 },
- { "Line", 0x2 },
- { "CD", 0x4 },
- },
-};
-
-static struct hda_input_mux alc883_3stack_6ch_intel = {
- .num_items = 4,
- .items = {
- { "Mic", 0x1 },
- { "Front Mic", 0x0 },
- { "Line", 0x2 },
- { "CD", 0x4 },
- },
-};
-
-static struct hda_input_mux alc883_lenovo_101e_capture_source = {
- .num_items = 2,
- .items = {
- { "Mic", 0x1 },
- { "Line", 0x2 },
- },
-};
-
-static struct hda_input_mux alc883_lenovo_nb0763_capture_source = {
- .num_items = 4,
- .items = {
- { "Mic", 0x0 },
- { "iMic", 0x1 },
- { "Line", 0x2 },
- { "CD", 0x4 },
- },
-};
-
-static struct hda_input_mux alc883_fujitsu_pi2515_capture_source = {
- .num_items = 2,
- .items = {
- { "Mic", 0x0 },
- { "Int Mic", 0x1 },
- },
-};
-
-static struct hda_input_mux alc883_lenovo_sky_capture_source = {
- .num_items = 3,
- .items = {
- { "Mic", 0x0 },
- { "Front Mic", 0x1 },
- { "Line", 0x4 },
- },
-};
-
-static struct hda_input_mux alc883_asus_eee1601_capture_source = {
- .num_items = 2,
- .items = {
- { "Mic", 0x0 },
- { "Line", 0x2 },
- },
-};
-
-static struct hda_input_mux alc889A_mb31_capture_source = {
- .num_items = 2,
- .items = {
- { "Mic", 0x0 },
- /* Front Mic (0x01) unused */
- { "Line", 0x2 },
- /* Line 2 (0x03) unused */
- /* CD (0x04) unsused? */
- },
-};
-
-/*
- * 2ch mode
- */
-static struct hda_channel_mode alc883_3ST_2ch_modes[1] = {
- { 2, NULL }
-};
-
-/*
- * 2ch mode
- */
-static struct hda_verb alc883_3ST_ch2_init[] = {
- { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
- { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
- { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
- { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
- { } /* end */
-};
-
-/*
- * 4ch mode
- */
-static struct hda_verb alc883_3ST_ch4_init[] = {
- { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
- { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
- { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
- { } /* end */
-};
-
-/*
- * 6ch mode
- */
-static struct hda_verb alc883_3ST_ch6_init[] = {
- { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- { 0x18, AC_VERB_SET_CONNECT_SEL, 0x02 },
- { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
- { } /* end */
-};
-
-static struct hda_channel_mode alc883_3ST_6ch_modes[3] = {
- { 2, alc883_3ST_ch2_init },
- { 4, alc883_3ST_ch4_init },
- { 6, alc883_3ST_ch6_init },
-};
-
-
-/*
- * 2ch mode
- */
-static struct hda_verb alc883_4ST_ch2_init[] = {
- { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
- { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
- { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
- { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
- { } /* end */
-};
-
-/*
- * 4ch mode
- */
-static struct hda_verb alc883_4ST_ch4_init[] = {
- { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
- { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
- { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
- { } /* end */
-};
-
-/*
- * 6ch mode
- */
-static struct hda_verb alc883_4ST_ch6_init[] = {
- { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- { 0x18, AC_VERB_SET_CONNECT_SEL, 0x02 },
- { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
- { } /* end */
-};
-
-/*
- * 8ch mode
- */
-static struct hda_verb alc883_4ST_ch8_init[] = {
- { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- { 0x17, AC_VERB_SET_CONNECT_SEL, 0x03 },
- { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- { 0x18, AC_VERB_SET_CONNECT_SEL, 0x02 },
- { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
- { } /* end */
-};
-
-static struct hda_channel_mode alc883_4ST_8ch_modes[4] = {
- { 2, alc883_4ST_ch2_init },
- { 4, alc883_4ST_ch4_init },
- { 6, alc883_4ST_ch6_init },
- { 8, alc883_4ST_ch8_init },
-};
-
-
-/*
- * 2ch mode
- */
-static struct hda_verb alc883_3ST_ch2_intel_init[] = {
- { 0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
- { 0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
- { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
- { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
- { } /* end */
-};
+ msleep(1);
-/*
- * 4ch mode
- */
-static struct hda_verb alc883_3ST_ch4_intel_init[] = {
- { 0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
- { 0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
- { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
- { } /* end */
-};
+ snd_hda_codec_write(codec, codec->afg, 0,
+ AC_VERB_SET_GPIO_DATA, gpiostate);
+}
-/*
- * 6ch mode
- */
-static struct hda_verb alc883_3ST_ch6_intel_init[] = {
- { 0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- { 0x19, AC_VERB_SET_CONNECT_SEL, 0x02 },
- { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
- { } /* end */
-};
+/* set up GPIO at initialization */
+static void alc885_macpro_init_hook(struct hda_codec *codec)
+{
+ alc882_gpio_mute(codec, 0, 0);
+ alc882_gpio_mute(codec, 1, 0);
+}
-static struct hda_channel_mode alc883_3ST_6ch_intel_modes[3] = {
- { 2, alc883_3ST_ch2_intel_init },
- { 4, alc883_3ST_ch4_intel_init },
- { 6, alc883_3ST_ch6_intel_init },
-};
+/* set up GPIO and update auto-muting at initialization */
+static void alc885_imac24_init_hook(struct hda_codec *codec)
+{
+ alc885_macpro_init_hook(codec);
+ alc_automute_amp(codec);
+}
/*
- * 6ch mode
+ * generic initialization of ADC, input mixers and output mixers
*/
-static struct hda_verb alc883_sixstack_ch6_init[] = {
- { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 },
- { 0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { } /* end */
-};
+static struct hda_verb alc883_auto_init_verbs[] = {
+ /*
+ * Unmute ADC0-2 and set the default input to mic-in
+ */
+ {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-/*
- * 8ch mode
- */
-static struct hda_verb alc883_sixstack_ch8_init[] = {
- { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { } /* end */
-};
+ /* Mute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
+ * mixer widget
+ * Note: PASD motherboards uses the Line In 2 as the input for
+ * front panel mic (mic 2)
+ */
+ /* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
-static struct hda_channel_mode alc883_sixstack_modes[2] = {
- { 6, alc883_sixstack_ch6_init },
- { 8, alc883_sixstack_ch8_init },
+ /*
+ * Set up output mixers (0x0c - 0x0f)
+ */
+ /* set vol=0 to output mixers */
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ /* set up input amps for analog loopback */
+ /* Amp Indices: DAC = 0, mixer = 1 */
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x26, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x26, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+
+ /* FIXME: use matrix-type input source selection */
+ /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
+ /* Input mixer2 */
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
+ /* Input mixer3 */
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
+
+ { }
};
/* 2ch mode (Speaker:front, Subwoofer:CLFE, Line:input, Headphones:front) */
{ }
};
-/* Pin assignment: Front=0x14, Rear=0x15, CLFE=0x16, Side=0x17
- * Mic=0x18, Front Mic=0x19, Line-In=0x1a, HP=0x1b
- */
-
-static struct snd_kcontrol_new alc883_base_mixer[] = {
- HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
- HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 2, HDA_INPUT),
- HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT),
- HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT),
- HDA_CODEC_VOLUME("Side Playback Volume", 0x0f, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("Side Playback Switch", 0x0f, 2, HDA_INPUT),
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
- HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
- HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
- HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT),
- HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
- { } /* end */
-};
+#define alc883_base_mixer alc882_base_mixer
static struct snd_kcontrol_new alc883_mitac_mixer[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
{ } /* end */
};
+static struct snd_kcontrol_new alc885_8ch_intel_mixer[] = {
+ HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0,
+ HDA_OUTPUT),
+ HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT),
+ HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME("Speaker Playback Volume", 0x0f, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Speaker Playback Switch", 0x0f, 2, HDA_INPUT),
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
+ HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x3, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Boost", 0x1b, 0, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x3, HDA_INPUT),
+ HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Front Mic Boost", 0x18, 0, HDA_INPUT),
+ HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
+ { } /* end */
+};
+
static struct snd_kcontrol_new alc883_fivestack_mixer[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
{ } /* end */
};
-static struct hda_verb alc883_init_verbs[] = {
- /* ADC1: mute amp left and right */
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* ADC2: mute amp left and right */
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* Front mixer: unmute input/output amp left and right (volume = 0) */
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- /* Rear mixer */
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- /* CLFE mixer */
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- /* Side mixer */
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-
- /* mute analog input loopbacks */
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
-
- /* Front Pin: output 0 (0x0c) */
- {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* Rear Pin: output 1 (0x0d) */
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
- /* CLFE Pin: output 2 (0x0e) */
- {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x16, AC_VERB_SET_CONNECT_SEL, 0x02},
- /* Side Pin: output 3 (0x0f) */
- {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x17, AC_VERB_SET_CONNECT_SEL, 0x03},
- /* Mic (rear) pin: input vref at 80% */
- {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
- {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- /* Front Mic pin: input vref at 80% */
- {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
- {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- /* Line In pin: input */
- {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- /* Line-2 In: Headphone output (output 0 - 0x0c) */
- {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x1b, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* CD pin widget for input */
- {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-
- /* FIXME: use matrix-type input source selection */
- /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
- /* Input mixer2 */
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
- /* Input mixer3 */
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
- { }
-};
-
/* toggle speaker-output according to the hp-jack state */
-static void alc883_mitac_init_hook(struct hda_codec *codec)
+static void alc883_mitac_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x15;
spec->autocfg.speaker_pins[0] = 0x14;
spec->autocfg.speaker_pins[1] = 0x17;
- alc_automute_amp(codec);
}
/* auto-toggle front mic */
{ } /* end */
};
+static struct hda_verb alc883_clevo_m540r_verbs[] = {
+ /* HP */
+ {0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ /* Int speaker */
+ /*{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},*/
+
+ /* enable unsolicited event */
+ /*
+ {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
+ {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_MIC_EVENT | AC_USRSP_EN},
+ */
+
+ { } /* end */
+};
+
static struct hda_verb alc883_clevo_m720_verbs[] = {
/* HP */
{0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
{ } /* end */
};
-static void alc888_3st_hp_init_hook(struct hda_codec *codec)
+static void alc888_3st_hp_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.speaker_pins[0] = 0x14;
spec->autocfg.speaker_pins[1] = 0x16;
spec->autocfg.speaker_pins[2] = 0x18;
- alc_automute_amp(codec);
}
static struct hda_verb alc888_3st_hp_verbs[] = {
};
/* toggle speaker-output according to the hp-jack state */
-static void alc883_medion_md2_init_hook(struct hda_codec *codec)
+static void alc883_medion_md2_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x14;
spec->autocfg.speaker_pins[0] = 0x15;
- alc_automute_amp(codec);
}
/* toggle speaker-output according to the hp-jack state */
HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
}
-static void alc883_clevo_m720_init_hook(struct hda_codec *codec)
+static void alc883_clevo_m720_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x15;
spec->autocfg.speaker_pins[0] = 0x14;
+}
+
+static void alc883_clevo_m720_init_hook(struct hda_codec *codec)
+{
alc_automute_amp(codec);
alc883_clevo_m720_mic_automute(codec);
}
}
/* toggle speaker-output according to the hp-jack state */
-static void alc883_2ch_fujitsu_pi2515_init_hook(struct hda_codec *codec)
+static void alc883_2ch_fujitsu_pi2515_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x14;
spec->autocfg.speaker_pins[0] = 0x15;
- alc_automute_amp(codec);
}
-static void alc883_haier_w66_init_hook(struct hda_codec *codec)
+static void alc883_haier_w66_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x1b;
spec->autocfg.speaker_pins[0] = 0x14;
- alc_automute_amp(codec);
}
static void alc883_lenovo_101e_ispeaker_automute(struct hda_codec *codec)
}
/* toggle speaker-output according to the hp-jack state */
-static void alc883_acer_aspire_init_hook(struct hda_codec *codec)
+static void alc883_acer_aspire_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x14;
spec->autocfg.speaker_pins[0] = 0x15;
spec->autocfg.speaker_pins[1] = 0x16;
- alc_automute_amp(codec);
}
static struct hda_verb alc883_acer_eapd_verbs[] = {
{ }
};
-static void alc888_6st_dell_init_hook(struct hda_codec *codec)
+static struct hda_verb alc888_acer_aspire_7730G_verbs[] = {
+ {0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x17, AC_VERB_SET_CONNECT_SEL, 0x02},
+ {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
+ { } /* end */
+};
+
+static void alc888_6st_dell_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.speaker_pins[1] = 0x15;
spec->autocfg.speaker_pins[2] = 0x16;
spec->autocfg.speaker_pins[3] = 0x17;
- alc_automute_amp(codec);
}
-static void alc888_lenovo_sky_init_hook(struct hda_codec *codec)
+static void alc888_lenovo_sky_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.speaker_pins[2] = 0x16;
spec->autocfg.speaker_pins[3] = 0x17;
spec->autocfg.speaker_pins[4] = 0x1a;
- alc_automute_amp(codec);
}
-static void alc883_vaiott_init_hook(struct hda_codec *codec)
+static void alc883_vaiott_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x15;
spec->autocfg.speaker_pins[0] = 0x14;
spec->autocfg.speaker_pins[1] = 0x17;
- alc_automute_amp(codec);
}
-/*
- * generic initialization of ADC, input mixers and output mixers
- */
-static struct hda_verb alc883_auto_init_verbs[] = {
- /*
- * Unmute ADC0-2 and set the default input to mic-in
- */
- {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-
- /* Mute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
- * mixer widget
- * Note: PASD motherboards uses the Line In 2 as the input for
- * front panel mic (mic 2)
- */
- /* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
-
- /*
- * Set up output mixers (0x0c - 0x0f)
- */
- /* set vol=0 to output mixers */
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- /* set up input amps for analog loopback */
- /* Amp Indices: DAC = 0, mixer = 1 */
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x26, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x26, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
-
- /* FIXME: use matrix-type input source selection */
- /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
- /* Input mixer1 */
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
- /* {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, */
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
- /* Input mixer2 */
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
- /* {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, */
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
-
- { }
-};
-
static struct hda_verb alc888_asus_m90v_verbs[] = {
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{ } /* end */
};
-static void alc883_nb_mic_automute(struct hda_codec *codec)
-{
- unsigned int present;
-
- present = snd_hda_codec_read(codec, 0x18, 0,
- AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
- snd_hda_codec_write(codec, 0x23, 0, AC_VERB_SET_AMP_GAIN_MUTE,
- 0x7000 | (0x00 << 8) | (present ? 0 : 0x80));
- snd_hda_codec_write(codec, 0x23, 0, AC_VERB_SET_AMP_GAIN_MUTE,
- 0x7000 | (0x01 << 8) | (present ? 0x80 : 0));
-}
-
-static void alc883_M90V_init_hook(struct hda_codec *codec)
+static void alc883_mode2_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.speaker_pins[0] = 0x14;
spec->autocfg.speaker_pins[1] = 0x15;
spec->autocfg.speaker_pins[2] = 0x16;
- alc_automute_pin(codec);
-}
-
-static void alc883_mode2_unsol_event(struct hda_codec *codec,
- unsigned int res)
-{
- switch (res >> 26) {
- case ALC880_MIC_EVENT:
- alc883_nb_mic_automute(codec);
- break;
- default:
- alc_sku_unsol_event(codec, res);
- break;
- }
-}
-
-static void alc883_mode2_inithook(struct hda_codec *codec)
-{
- alc883_M90V_init_hook(codec);
- alc883_nb_mic_automute(codec);
+ spec->ext_mic.pin = 0x18;
+ spec->int_mic.pin = 0x19;
+ spec->ext_mic.mux_idx = 0;
+ spec->int_mic.mux_idx = 1;
+ spec->auto_mic = 1;
}
static struct hda_verb alc888_asus_eee1601_verbs[] = {
alc889A_mb31_automute(codec);
}
+
#ifdef CONFIG_SND_HDA_POWER_SAVE
-#define alc883_loopbacks alc880_loopbacks
+#define alc882_loopbacks alc880_loopbacks
#endif
/* pcm configuration: identical with ALC880 */
-#define alc883_pcm_analog_playback alc880_pcm_analog_playback
-#define alc883_pcm_analog_capture alc880_pcm_analog_capture
-#define alc883_pcm_analog_alt_capture alc880_pcm_analog_alt_capture
-#define alc883_pcm_digital_playback alc880_pcm_digital_playback
-#define alc883_pcm_digital_capture alc880_pcm_digital_capture
+#define alc882_pcm_analog_playback alc880_pcm_analog_playback
+#define alc882_pcm_analog_capture alc880_pcm_analog_capture
+#define alc882_pcm_digital_playback alc880_pcm_digital_playback
+#define alc882_pcm_digital_capture alc880_pcm_digital_capture
+
+static hda_nid_t alc883_slave_dig_outs[] = {
+ ALC1200_DIGOUT_NID, 0,
+};
+
+static hda_nid_t alc1200_slave_dig_outs[] = {
+ ALC883_DIGOUT_NID, 0,
+};
/*
* configuration and preset
*/
-static const char *alc883_models[ALC883_MODEL_LAST] = {
- [ALC883_3ST_2ch_DIG] = "3stack-dig",
+static const char *alc882_models[ALC882_MODEL_LAST] = {
+ [ALC882_3ST_DIG] = "3stack-dig",
+ [ALC882_6ST_DIG] = "6stack-dig",
+ [ALC882_ARIMA] = "arima",
+ [ALC882_W2JC] = "w2jc",
+ [ALC882_TARGA] = "targa",
+ [ALC882_ASUS_A7J] = "asus-a7j",
+ [ALC882_ASUS_A7M] = "asus-a7m",
+ [ALC885_MACPRO] = "macpro",
+ [ALC885_MB5] = "mb5",
+ [ALC885_MBP3] = "mbp3",
+ [ALC885_IMAC24] = "imac24",
+ [ALC883_3ST_2ch_DIG] = "3stack-2ch-dig",
[ALC883_3ST_6ch_DIG] = "3stack-6ch-dig",
[ALC883_3ST_6ch] = "3stack-6ch",
- [ALC883_6ST_DIG] = "6stack-dig",
+ [ALC883_6ST_DIG] = "alc883-6stack-dig",
[ALC883_TARGA_DIG] = "targa-dig",
[ALC883_TARGA_2ch_DIG] = "targa-2ch-dig",
[ALC883_TARGA_8ch_DIG] = "targa-8ch-dig",
[ALC888_ACER_ASPIRE_4930G] = "acer-aspire-4930g",
[ALC888_ACER_ASPIRE_6530G] = "acer-aspire-6530g",
[ALC888_ACER_ASPIRE_8930G] = "acer-aspire-8930g",
+ [ALC888_ACER_ASPIRE_7730G] = "acer-aspire-7730g",
[ALC883_MEDION] = "medion",
[ALC883_MEDION_MD2] = "medion-md2",
[ALC883_LAPTOP_EAPD] = "laptop-eapd",
[ALC888_3ST_HP] = "3stack-hp",
[ALC888_6ST_DELL] = "6stack-dell",
[ALC883_MITAC] = "mitac",
+ [ALC883_CLEVO_M540R] = "clevo-m540r",
[ALC883_CLEVO_M720] = "clevo-m720",
[ALC883_FUJITSU_PI2515] = "fujitsu-pi2515",
[ALC888_FUJITSU_XA3530] = "fujitsu-xa3530",
[ALC883_3ST_6ch_INTEL] = "3stack-6ch-intel",
+ [ALC889A_INTEL] = "intel-alc889a",
+ [ALC889_INTEL] = "intel-x58",
[ALC1200_ASUS_P5Q] = "asus-p5q",
[ALC889A_MB31] = "mb31",
[ALC883_SONY_VAIO_TT] = "sony-vaio-tt",
- [ALC883_AUTO] = "auto",
+ [ALC882_AUTO] = "auto",
};
-static struct snd_pci_quirk alc883_cfg_tbl[] = {
- SND_PCI_QUIRK(0x1019, 0x6668, "ECS", ALC883_3ST_6ch_DIG),
+static struct snd_pci_quirk alc882_cfg_tbl[] = {
+ SND_PCI_QUIRK(0x1019, 0x6668, "ECS", ALC882_6ST_DIG),
+
SND_PCI_QUIRK(0x1025, 0x006c, "Acer Aspire 9810", ALC883_ACER_ASPIRE),
SND_PCI_QUIRK(0x1025, 0x0090, "Acer Aspire", ALC883_ACER_ASPIRE),
SND_PCI_QUIRK(0x1025, 0x010a, "Acer Ferrari 5000", ALC883_ACER_ASPIRE),
ALC888_ACER_ASPIRE_8930G),
SND_PCI_QUIRK(0x1025, 0x0146, "Acer Aspire 6935G",
ALC888_ACER_ASPIRE_8930G),
- SND_PCI_QUIRK(0x1025, 0x0157, "Acer X3200", ALC883_AUTO),
- SND_PCI_QUIRK(0x1025, 0x0158, "Acer AX1700-U3700A", ALC883_AUTO),
+ SND_PCI_QUIRK(0x1025, 0x0157, "Acer X3200", ALC882_AUTO),
+ SND_PCI_QUIRK(0x1025, 0x0158, "Acer AX1700-U3700A", ALC882_AUTO),
SND_PCI_QUIRK(0x1025, 0x015e, "Acer Aspire 6930G",
ALC888_ACER_ASPIRE_6530G),
SND_PCI_QUIRK(0x1025, 0x0166, "Acer Aspire 6530G",
ALC888_ACER_ASPIRE_6530G),
+ SND_PCI_QUIRK(0x1025, 0x0142, "Acer Aspire 7730G",
+ ALC888_ACER_ASPIRE_7730G),
/* default Acer -- disabled as it causes more problems.
* model=auto should work fine now
*/
/* SND_PCI_QUIRK_VENDOR(0x1025, "Acer laptop", ALC883_ACER), */
+
SND_PCI_QUIRK(0x1028, 0x020d, "Dell Inspiron 530", ALC888_6ST_DELL),
+
SND_PCI_QUIRK(0x103c, 0x2a3d, "HP Pavillion", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x103c, 0x2a4f, "HP Samba", ALC888_3ST_HP),
SND_PCI_QUIRK(0x103c, 0x2a60, "HP Lucknow", ALC888_3ST_HP),
SND_PCI_QUIRK(0x103c, 0x2a61, "HP Nettle", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x103c, 0x2a66, "HP Acacia", ALC888_3ST_HP),
SND_PCI_QUIRK(0x103c, 0x2a72, "HP Educ.ar", ALC888_3ST_HP),
+
+ SND_PCI_QUIRK(0x1043, 0x060d, "Asus A7J", ALC882_ASUS_A7J),
+ SND_PCI_QUIRK(0x1043, 0x1243, "Asus A7J", ALC882_ASUS_A7J),
+ SND_PCI_QUIRK(0x1043, 0x13c2, "Asus A7M", ALC882_ASUS_A7M),
SND_PCI_QUIRK(0x1043, 0x1873, "Asus M90V", ALC888_ASUS_M90V),
+ SND_PCI_QUIRK(0x1043, 0x1971, "Asus W2JC", ALC882_W2JC),
+ SND_PCI_QUIRK(0x1043, 0x817f, "Asus P5LD2", ALC882_6ST_DIG),
+ SND_PCI_QUIRK(0x1043, 0x81d8, "Asus P5WD", ALC882_6ST_DIG),
SND_PCI_QUIRK(0x1043, 0x8249, "Asus M2A-VM HDMI", ALC883_3ST_6ch_DIG),
SND_PCI_QUIRK(0x1043, 0x8284, "Asus Z37E", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x1043, 0x82fe, "Asus P5Q-EM HDMI", ALC1200_ASUS_P5Q),
SND_PCI_QUIRK(0x1043, 0x835f, "Asus Eee 1601", ALC888_ASUS_EEE1601),
+
+ SND_PCI_QUIRK(0x104d, 0x9047, "Sony Vaio TT", ALC883_SONY_VAIO_TT),
SND_PCI_QUIRK(0x105b, 0x0ce8, "Foxconn P35AX-S", ALC883_6ST_DIG),
- SND_PCI_QUIRK(0x105b, 0x6668, "Foxconn", ALC883_6ST_DIG),
+ SND_PCI_QUIRK(0x105b, 0x6668, "Foxconn", ALC882_6ST_DIG),
SND_PCI_QUIRK(0x1071, 0x8227, "Mitac 82801H", ALC883_MITAC),
SND_PCI_QUIRK(0x1071, 0x8253, "Mitac 8252d", ALC883_MITAC),
SND_PCI_QUIRK(0x1071, 0x8258, "Evesham Voyaeger", ALC883_LAPTOP_EAPD),
SND_PCI_QUIRK(0x10f1, 0x2350, "TYAN-S2350", ALC888_6ST_DELL),
SND_PCI_QUIRK(0x108e, 0x534d, NULL, ALC883_3ST_6ch),
- SND_PCI_QUIRK(0x1458, 0xa002, "MSI", ALC883_6ST_DIG),
+ SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte P35 DS3R", ALC882_6ST_DIG),
+
SND_PCI_QUIRK(0x1462, 0x0349, "MSI", ALC883_TARGA_2ch_DIG),
SND_PCI_QUIRK(0x1462, 0x040d, "MSI", ALC883_TARGA_2ch_DIG),
SND_PCI_QUIRK(0x1462, 0x0579, "MSI", ALC883_TARGA_2ch_DIG),
+ SND_PCI_QUIRK(0x1462, 0x28fb, "Targa T8", ALC882_TARGA), /* MSI-1049 T8 */
SND_PCI_QUIRK(0x1462, 0x2fb3, "MSI", ALC883_TARGA_2ch_DIG),
+ SND_PCI_QUIRK(0x1462, 0x6668, "MSI", ALC882_6ST_DIG),
SND_PCI_QUIRK(0x1462, 0x3729, "MSI S420", ALC883_TARGA_DIG),
SND_PCI_QUIRK(0x1462, 0x3783, "NEC S970", ALC883_TARGA_DIG),
SND_PCI_QUIRK(0x1462, 0x3b7f, "MSI", ALC883_TARGA_2ch_DIG),
SND_PCI_QUIRK(0x1462, 0x3fc3, "MSI", ALC883_TARGA_DIG),
SND_PCI_QUIRK(0x1462, 0x3fcc, "MSI", ALC883_TARGA_DIG),
SND_PCI_QUIRK(0x1462, 0x3fdf, "MSI", ALC883_TARGA_DIG),
+ SND_PCI_QUIRK(0x1462, 0x42cd, "MSI", ALC883_TARGA_DIG),
SND_PCI_QUIRK(0x1462, 0x4314, "MSI", ALC883_TARGA_DIG),
SND_PCI_QUIRK(0x1462, 0x4319, "MSI", ALC883_TARGA_DIG),
SND_PCI_QUIRK(0x1462, 0x4324, "MSI", ALC883_TARGA_DIG),
SND_PCI_QUIRK(0x1462, 0x7327, "MSI", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x1462, 0x7350, "MSI", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x1462, 0xa422, "MSI", ALC883_TARGA_2ch_DIG),
+ SND_PCI_QUIRK(0x1462, 0xaa08, "MSI", ALC883_TARGA_2ch_DIG),
+
SND_PCI_QUIRK(0x147b, 0x1083, "Abit IP35-PRO", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x1558, 0x0721, "Clevo laptop M720R", ALC883_CLEVO_M720),
SND_PCI_QUIRK(0x1558, 0x0722, "Clevo laptop M720SR", ALC883_CLEVO_M720),
+ SND_PCI_QUIRK(0x1558, 0x5409, "Clevo laptop M540R", ALC883_CLEVO_M540R),
SND_PCI_QUIRK_VENDOR(0x1558, "Clevo laptop", ALC883_LAPTOP_EAPD),
SND_PCI_QUIRK(0x15d9, 0x8780, "Supermicro PDSBA", ALC883_3ST_6ch),
+ /* SND_PCI_QUIRK(0x161f, 0x2054, "Arima W820", ALC882_ARIMA), */
SND_PCI_QUIRK(0x161f, 0x2054, "Medion laptop", ALC883_MEDION),
SND_PCI_QUIRK_MASK(0x1734, 0xfff0, 0x1100, "FSC AMILO Xi/Pi25xx",
ALC883_FUJITSU_PI2515),
SND_PCI_QUIRK(0x17c0, 0x4085, "MEDION MD96630", ALC888_LENOVO_MS7195_DIG),
SND_PCI_QUIRK(0x17f2, 0x5000, "Albatron KI690-AM2", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x1991, 0x5625, "Haier W66", ALC883_HAIER_W66),
+
SND_PCI_QUIRK(0x8086, 0x0001, "DG33BUC", ALC883_3ST_6ch_INTEL),
SND_PCI_QUIRK(0x8086, 0x0002, "DG33FBC", ALC883_3ST_6ch_INTEL),
SND_PCI_QUIRK(0x8086, 0x2503, "82801H", ALC883_MITAC),
- SND_PCI_QUIRK(0x8086, 0x0022, "DX58SO", ALC883_3ST_6ch_INTEL),
+ SND_PCI_QUIRK(0x8086, 0x0022, "DX58SO", ALC889_INTEL),
+ SND_PCI_QUIRK(0x8086, 0x0021, "Intel IbexPeak", ALC889A_INTEL),
+ SND_PCI_QUIRK(0x8086, 0x3b56, "Intel IbexPeak", ALC889A_INTEL),
SND_PCI_QUIRK(0x8086, 0xd601, "D102GGC", ALC883_3ST_6ch),
- SND_PCI_QUIRK(0x104d, 0x9047, "Sony Vaio TT", ALC883_SONY_VAIO_TT),
- {}
-};
-static hda_nid_t alc883_slave_dig_outs[] = {
- ALC1200_DIGOUT_NID, 0,
+ {}
};
-static hda_nid_t alc1200_slave_dig_outs[] = {
- ALC883_DIGOUT_NID, 0,
+/* codec SSID table for Intel Mac */
+static struct snd_pci_quirk alc882_ssid_cfg_tbl[] = {
+ SND_PCI_QUIRK(0x106b, 0x00a0, "MacBookPro 3,1", ALC885_MBP3),
+ SND_PCI_QUIRK(0x106b, 0x00a1, "Macbook", ALC885_MBP3),
+ SND_PCI_QUIRK(0x106b, 0x00a4, "MacbookPro 4,1", ALC885_MBP3),
+ SND_PCI_QUIRK(0x106b, 0x0c00, "Mac Pro", ALC885_MACPRO),
+ SND_PCI_QUIRK(0x106b, 0x1000, "iMac 24", ALC885_IMAC24),
+ SND_PCI_QUIRK(0x106b, 0x2800, "AppleTV", ALC885_IMAC24),
+ SND_PCI_QUIRK(0x106b, 0x2c00, "MacbookPro rev3", ALC885_MBP3),
+ SND_PCI_QUIRK(0x106b, 0x3600, "Macbook 3,1", ALC889A_MB31),
+ SND_PCI_QUIRK(0x106b, 0x3800, "MacbookPro 4,1", ALC885_MBP3),
+ SND_PCI_QUIRK(0x106b, 0x3e00, "iMac 24 Aluminum", ALC885_IMAC24),
+ SND_PCI_QUIRK(0x106b, 0x3f00, "Macbook 5,1", ALC885_MB5),
+ /* FIXME: HP jack sense seems not working for MBP 5,1, so apparently
+ * no perfect solution yet
+ */
+ SND_PCI_QUIRK(0x106b, 0x4000, "MacbookPro 5,1", ALC885_MB5),
+ {} /* terminator */
};
-static struct alc_config_preset alc883_presets[] = {
+static struct alc_config_preset alc882_presets[] = {
+ [ALC882_3ST_DIG] = {
+ .mixers = { alc882_base_mixer },
+ .init_verbs = { alc882_base_init_verbs,
+ alc882_adc1_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc882_dac_nids),
+ .dac_nids = alc882_dac_nids,
+ .dig_out_nid = ALC882_DIGOUT_NID,
+ .dig_in_nid = ALC882_DIGIN_NID,
+ .num_channel_mode = ARRAY_SIZE(alc882_ch_modes),
+ .channel_mode = alc882_ch_modes,
+ .need_dac_fix = 1,
+ .input_mux = &alc882_capture_source,
+ },
+ [ALC882_6ST_DIG] = {
+ .mixers = { alc882_base_mixer, alc882_chmode_mixer },
+ .init_verbs = { alc882_base_init_verbs,
+ alc882_adc1_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc882_dac_nids),
+ .dac_nids = alc882_dac_nids,
+ .dig_out_nid = ALC882_DIGOUT_NID,
+ .dig_in_nid = ALC882_DIGIN_NID,
+ .num_channel_mode = ARRAY_SIZE(alc882_sixstack_modes),
+ .channel_mode = alc882_sixstack_modes,
+ .input_mux = &alc882_capture_source,
+ },
+ [ALC882_ARIMA] = {
+ .mixers = { alc882_base_mixer, alc882_chmode_mixer },
+ .init_verbs = { alc882_base_init_verbs, alc882_adc1_init_verbs,
+ alc882_eapd_verbs },
+ .num_dacs = ARRAY_SIZE(alc882_dac_nids),
+ .dac_nids = alc882_dac_nids,
+ .num_channel_mode = ARRAY_SIZE(alc882_sixstack_modes),
+ .channel_mode = alc882_sixstack_modes,
+ .input_mux = &alc882_capture_source,
+ },
+ [ALC882_W2JC] = {
+ .mixers = { alc882_w2jc_mixer, alc882_chmode_mixer },
+ .init_verbs = { alc882_base_init_verbs, alc882_adc1_init_verbs,
+ alc882_eapd_verbs, alc880_gpio1_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc882_dac_nids),
+ .dac_nids = alc882_dac_nids,
+ .num_channel_mode = ARRAY_SIZE(alc880_threestack_modes),
+ .channel_mode = alc880_threestack_modes,
+ .need_dac_fix = 1,
+ .input_mux = &alc882_capture_source,
+ .dig_out_nid = ALC882_DIGOUT_NID,
+ },
+ [ALC885_MBP3] = {
+ .mixers = { alc885_mbp3_mixer, alc882_chmode_mixer },
+ .init_verbs = { alc885_mbp3_init_verbs,
+ alc880_gpio1_init_verbs },
+ .num_dacs = 2,
+ .dac_nids = alc882_dac_nids,
+ .hp_nid = 0x04,
+ .channel_mode = alc885_mbp_4ch_modes,
+ .num_channel_mode = ARRAY_SIZE(alc885_mbp_4ch_modes),
+ .input_mux = &alc882_capture_source,
+ .dig_out_nid = ALC882_DIGOUT_NID,
+ .dig_in_nid = ALC882_DIGIN_NID,
+ .unsol_event = alc_automute_amp_unsol_event,
+ .setup = alc885_mbp3_setup,
+ .init_hook = alc_automute_amp,
+ },
+ [ALC885_MB5] = {
+ .mixers = { alc885_mb5_mixer, alc882_chmode_mixer },
+ .init_verbs = { alc885_mb5_init_verbs,
+ alc880_gpio1_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc882_dac_nids),
+ .dac_nids = alc882_dac_nids,
+ .channel_mode = alc885_mb5_6ch_modes,
+ .num_channel_mode = ARRAY_SIZE(alc885_mb5_6ch_modes),
+ .input_mux = &mb5_capture_source,
+ .dig_out_nid = ALC882_DIGOUT_NID,
+ .dig_in_nid = ALC882_DIGIN_NID,
+ },
+ [ALC885_MACPRO] = {
+ .mixers = { alc882_macpro_mixer },
+ .init_verbs = { alc882_macpro_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc882_dac_nids),
+ .dac_nids = alc882_dac_nids,
+ .dig_out_nid = ALC882_DIGOUT_NID,
+ .dig_in_nid = ALC882_DIGIN_NID,
+ .num_channel_mode = ARRAY_SIZE(alc882_ch_modes),
+ .channel_mode = alc882_ch_modes,
+ .input_mux = &alc882_capture_source,
+ .init_hook = alc885_macpro_init_hook,
+ },
+ [ALC885_IMAC24] = {
+ .mixers = { alc885_imac24_mixer },
+ .init_verbs = { alc885_imac24_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc882_dac_nids),
+ .dac_nids = alc882_dac_nids,
+ .dig_out_nid = ALC882_DIGOUT_NID,
+ .dig_in_nid = ALC882_DIGIN_NID,
+ .num_channel_mode = ARRAY_SIZE(alc882_ch_modes),
+ .channel_mode = alc882_ch_modes,
+ .input_mux = &alc882_capture_source,
+ .unsol_event = alc_automute_amp_unsol_event,
+ .setup = alc885_imac24_setup,
+ .init_hook = alc885_imac24_init_hook,
+ },
+ [ALC882_TARGA] = {
+ .mixers = { alc882_targa_mixer, alc882_chmode_mixer },
+ .init_verbs = { alc882_base_init_verbs, alc882_adc1_init_verbs,
+ alc880_gpio3_init_verbs, alc882_targa_verbs},
+ .num_dacs = ARRAY_SIZE(alc882_dac_nids),
+ .dac_nids = alc882_dac_nids,
+ .dig_out_nid = ALC882_DIGOUT_NID,
+ .num_adc_nids = ARRAY_SIZE(alc882_adc_nids),
+ .adc_nids = alc882_adc_nids,
+ .capsrc_nids = alc882_capsrc_nids,
+ .num_channel_mode = ARRAY_SIZE(alc882_3ST_6ch_modes),
+ .channel_mode = alc882_3ST_6ch_modes,
+ .need_dac_fix = 1,
+ .input_mux = &alc882_capture_source,
+ .unsol_event = alc882_targa_unsol_event,
+ .setup = alc882_targa_setup,
+ .init_hook = alc882_targa_automute,
+ },
+ [ALC882_ASUS_A7J] = {
+ .mixers = { alc882_asus_a7j_mixer, alc882_chmode_mixer },
+ .init_verbs = { alc882_base_init_verbs, alc882_adc1_init_verbs,
+ alc882_asus_a7j_verbs},
+ .num_dacs = ARRAY_SIZE(alc882_dac_nids),
+ .dac_nids = alc882_dac_nids,
+ .dig_out_nid = ALC882_DIGOUT_NID,
+ .num_adc_nids = ARRAY_SIZE(alc882_adc_nids),
+ .adc_nids = alc882_adc_nids,
+ .capsrc_nids = alc882_capsrc_nids,
+ .num_channel_mode = ARRAY_SIZE(alc882_3ST_6ch_modes),
+ .channel_mode = alc882_3ST_6ch_modes,
+ .need_dac_fix = 1,
+ .input_mux = &alc882_capture_source,
+ },
+ [ALC882_ASUS_A7M] = {
+ .mixers = { alc882_asus_a7m_mixer, alc882_chmode_mixer },
+ .init_verbs = { alc882_base_init_verbs, alc882_adc1_init_verbs,
+ alc882_eapd_verbs, alc880_gpio1_init_verbs,
+ alc882_asus_a7m_verbs },
+ .num_dacs = ARRAY_SIZE(alc882_dac_nids),
+ .dac_nids = alc882_dac_nids,
+ .dig_out_nid = ALC882_DIGOUT_NID,
+ .num_channel_mode = ARRAY_SIZE(alc880_threestack_modes),
+ .channel_mode = alc880_threestack_modes,
+ .need_dac_fix = 1,
+ .input_mux = &alc882_capture_source,
+ },
[ALC883_3ST_2ch_DIG] = {
.mixers = { alc883_3ST_2ch_mixer },
.init_verbs = { alc883_init_verbs },
.need_dac_fix = 1,
.input_mux = &alc883_3stack_6ch_intel,
},
+ [ALC889A_INTEL] = {
+ .mixers = { alc885_8ch_intel_mixer, alc883_chmode_mixer },
+ .init_verbs = { alc885_init_verbs, alc885_init_input_verbs,
+ alc_hp15_unsol_verbs },
+ .num_dacs = ARRAY_SIZE(alc883_dac_nids),
+ .dac_nids = alc883_dac_nids,
+ .num_adc_nids = ARRAY_SIZE(alc889_adc_nids),
+ .adc_nids = alc889_adc_nids,
+ .dig_out_nid = ALC883_DIGOUT_NID,
+ .dig_in_nid = ALC883_DIGIN_NID,
+ .slave_dig_outs = alc883_slave_dig_outs,
+ .num_channel_mode = ARRAY_SIZE(alc889_8ch_intel_modes),
+ .channel_mode = alc889_8ch_intel_modes,
+ .capsrc_nids = alc889_capsrc_nids,
+ .input_mux = &alc889_capture_source,
+ .setup = alc889_automute_setup,
+ .init_hook = alc_automute_amp,
+ .unsol_event = alc_automute_amp_unsol_event,
+ .need_dac_fix = 1,
+ },
+ [ALC889_INTEL] = {
+ .mixers = { alc885_8ch_intel_mixer, alc883_chmode_mixer },
+ .init_verbs = { alc885_init_verbs, alc889_init_input_verbs,
+ alc889_eapd_verbs, alc_hp15_unsol_verbs},
+ .num_dacs = ARRAY_SIZE(alc883_dac_nids),
+ .dac_nids = alc883_dac_nids,
+ .num_adc_nids = ARRAY_SIZE(alc889_adc_nids),
+ .adc_nids = alc889_adc_nids,
+ .dig_out_nid = ALC883_DIGOUT_NID,
+ .dig_in_nid = ALC883_DIGIN_NID,
+ .slave_dig_outs = alc883_slave_dig_outs,
+ .num_channel_mode = ARRAY_SIZE(alc889_8ch_intel_modes),
+ .channel_mode = alc889_8ch_intel_modes,
+ .capsrc_nids = alc889_capsrc_nids,
+ .input_mux = &alc889_capture_source,
+ .setup = alc889_automute_setup,
+ .init_hook = alc889_intel_init_hook,
+ .unsol_event = alc_automute_amp_unsol_event,
+ .need_dac_fix = 1,
+ },
[ALC883_6ST_DIG] = {
.mixers = { alc883_base_mixer, alc883_chmode_mixer },
.init_verbs = { alc883_init_verbs },
.need_dac_fix = 1,
.input_mux = &alc883_capture_source,
.unsol_event = alc883_targa_unsol_event,
- .init_hook = alc883_targa_init_hook,
+ .setup = alc882_targa_setup,
+ .init_hook = alc882_targa_automute,
},
[ALC883_TARGA_2ch_DIG] = {
.mixers = { alc883_targa_2ch_mixer},
.channel_mode = alc883_3ST_2ch_modes,
.input_mux = &alc883_capture_source,
.unsol_event = alc883_targa_unsol_event,
- .init_hook = alc883_targa_init_hook,
+ .setup = alc882_targa_setup,
+ .init_hook = alc882_targa_automute,
},
[ALC883_TARGA_8ch_DIG] = {
.mixers = { alc883_base_mixer, alc883_chmode_mixer },
.need_dac_fix = 1,
.input_mux = &alc883_capture_source,
.unsol_event = alc883_targa_unsol_event,
- .init_hook = alc883_targa_init_hook,
+ .setup = alc882_targa_setup,
+ .init_hook = alc882_targa_automute,
},
[ALC883_ACER] = {
.mixers = { alc883_base_mixer },
.channel_mode = alc883_3ST_2ch_modes,
.input_mux = &alc883_capture_source,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc883_acer_aspire_init_hook,
+ .setup = alc883_acer_aspire_setup,
+ .init_hook = alc_automute_amp,
},
[ALC888_ACER_ASPIRE_4930G] = {
.mixers = { alc888_base_mixer,
ARRAY_SIZE(alc888_2_capture_sources),
.input_mux = alc888_2_capture_sources,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc888_acer_aspire_4930g_init_hook,
+ .setup = alc888_acer_aspire_4930g_setup,
+ .init_hook = alc_automute_amp,
},
[ALC888_ACER_ASPIRE_6530G] = {
.mixers = { alc888_acer_aspire_6530_mixer },
ARRAY_SIZE(alc888_2_capture_sources),
.input_mux = alc888_acer_aspire_6530_sources,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc888_acer_aspire_6530g_init_hook,
+ .setup = alc888_acer_aspire_6530g_setup,
+ .init_hook = alc_automute_amp,
},
[ALC888_ACER_ASPIRE_8930G] = {
.mixers = { alc888_base_mixer,
ARRAY_SIZE(alc889_capture_sources),
.input_mux = alc889_capture_sources,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc889_acer_aspire_8930g_init_hook,
+ .setup = alc889_acer_aspire_8930g_setup,
+ .init_hook = alc_automute_amp,
+ },
+ [ALC888_ACER_ASPIRE_7730G] = {
+ .mixers = { alc883_3ST_6ch_mixer,
+ alc883_chmode_mixer },
+ .init_verbs = { alc883_init_verbs, alc880_gpio1_init_verbs,
+ alc888_acer_aspire_7730G_verbs },
+ .num_dacs = ARRAY_SIZE(alc883_dac_nids),
+ .dac_nids = alc883_dac_nids,
+ .num_adc_nids = ARRAY_SIZE(alc883_adc_nids_rev),
+ .adc_nids = alc883_adc_nids_rev,
+ .capsrc_nids = alc883_capsrc_nids_rev,
+ .dig_out_nid = ALC883_DIGOUT_NID,
+ .num_channel_mode = ARRAY_SIZE(alc883_3ST_6ch_modes),
+ .channel_mode = alc883_3ST_6ch_modes,
+ .need_dac_fix = 1,
+ .const_channel_count = 6,
+ .input_mux = &alc883_capture_source,
+ .unsol_event = alc_automute_amp_unsol_event,
+ .setup = alc888_acer_aspire_6530g_setup,
+ .init_hook = alc_automute_amp,
},
[ALC883_MEDION] = {
.mixers = { alc883_fivestack_mixer,
.channel_mode = alc883_3ST_2ch_modes,
.input_mux = &alc883_capture_source,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc883_medion_md2_init_hook,
+ .setup = alc883_medion_md2_setup,
+ .init_hook = alc_automute_amp,
},
[ALC883_LAPTOP_EAPD] = {
.mixers = { alc883_base_mixer },
.channel_mode = alc883_3ST_2ch_modes,
.input_mux = &alc883_capture_source,
},
+ [ALC883_CLEVO_M540R] = {
+ .mixers = { alc883_3ST_6ch_mixer, alc883_chmode_mixer },
+ .init_verbs = { alc883_init_verbs, alc883_clevo_m540r_verbs },
+ .num_dacs = ARRAY_SIZE(alc883_dac_nids),
+ .dac_nids = alc883_dac_nids,
+ .dig_out_nid = ALC883_DIGOUT_NID,
+ .dig_in_nid = ALC883_DIGIN_NID,
+ .num_channel_mode = ARRAY_SIZE(alc883_3ST_6ch_clevo_modes),
+ .channel_mode = alc883_3ST_6ch_clevo_modes,
+ .need_dac_fix = 1,
+ .input_mux = &alc883_capture_source,
+ /* This machine has the hardware HP auto-muting, thus
+ * we need no software mute via unsol event
+ */
+ },
[ALC883_CLEVO_M720] = {
.mixers = { alc883_clevo_m720_mixer },
.init_verbs = { alc883_init_verbs, alc883_clevo_m720_verbs },
.channel_mode = alc883_3ST_2ch_modes,
.input_mux = &alc883_capture_source,
.unsol_event = alc883_clevo_m720_unsol_event,
+ .setup = alc883_clevo_m720_setup,
.init_hook = alc883_clevo_m720_init_hook,
},
[ALC883_LENOVO_101E_2ch] = {
.need_dac_fix = 1,
.input_mux = &alc883_lenovo_nb0763_capture_source,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc883_medion_md2_init_hook,
+ .setup = alc883_medion_md2_setup,
+ .init_hook = alc_automute_amp,
},
[ALC888_LENOVO_MS7195_DIG] = {
.mixers = { alc883_3ST_6ch_mixer, alc883_chmode_mixer },
.channel_mode = alc883_3ST_2ch_modes,
.input_mux = &alc883_capture_source,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc883_haier_w66_init_hook,
+ .setup = alc883_haier_w66_setup,
+ .init_hook = alc_automute_amp,
},
[ALC888_3ST_HP] = {
.mixers = { alc883_3ST_6ch_mixer, alc883_chmode_mixer },
.need_dac_fix = 1,
.input_mux = &alc883_capture_source,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc888_3st_hp_init_hook,
+ .setup = alc888_3st_hp_setup,
+ .init_hook = alc_automute_amp,
},
[ALC888_6ST_DELL] = {
.mixers = { alc883_base_mixer, alc883_chmode_mixer },
.channel_mode = alc883_sixstack_modes,
.input_mux = &alc883_capture_source,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc888_6st_dell_init_hook,
+ .setup = alc888_6st_dell_setup,
+ .init_hook = alc_automute_amp,
},
[ALC883_MITAC] = {
.mixers = { alc883_mitac_mixer },
.channel_mode = alc883_3ST_2ch_modes,
.input_mux = &alc883_capture_source,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc883_mitac_init_hook,
+ .setup = alc883_mitac_setup,
+ .init_hook = alc_automute_amp,
},
[ALC883_FUJITSU_PI2515] = {
.mixers = { alc883_2ch_fujitsu_pi2515_mixer },
.channel_mode = alc883_3ST_2ch_modes,
.input_mux = &alc883_fujitsu_pi2515_capture_source,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc883_2ch_fujitsu_pi2515_init_hook,
+ .setup = alc883_2ch_fujitsu_pi2515_setup,
+ .init_hook = alc_automute_amp,
},
[ALC888_FUJITSU_XA3530] = {
.mixers = { alc888_base_mixer, alc883_chmode_mixer },
ARRAY_SIZE(alc888_2_capture_sources),
.input_mux = alc888_2_capture_sources,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc888_fujitsu_xa3530_init_hook,
+ .setup = alc888_fujitsu_xa3530_setup,
+ .init_hook = alc_automute_amp,
},
[ALC888_LENOVO_SKY] = {
.mixers = { alc888_lenovo_sky_mixer, alc883_chmode_mixer },
.need_dac_fix = 1,
.input_mux = &alc883_lenovo_sky_capture_source,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc888_lenovo_sky_init_hook,
+ .setup = alc888_lenovo_sky_setup,
+ .init_hook = alc_automute_amp,
},
[ALC888_ASUS_M90V] = {
.mixers = { alc883_3ST_6ch_mixer, alc883_chmode_mixer },
.channel_mode = alc883_3ST_6ch_modes,
.need_dac_fix = 1,
.input_mux = &alc883_fujitsu_pi2515_capture_source,
- .unsol_event = alc883_mode2_unsol_event,
- .init_hook = alc883_mode2_inithook,
+ .unsol_event = alc_sku_unsol_event,
+ .setup = alc883_mode2_setup,
+ .init_hook = alc_inithook,
},
[ALC888_ASUS_EEE1601] = {
.mixers = { alc883_asus_eee1601_mixer },
.channel_mode = alc883_3ST_2ch_modes,
.input_mux = &alc883_capture_source,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc883_vaiott_init_hook,
+ .setup = alc883_vaiott_setup,
+ .init_hook = alc_automute_amp,
},
};
+/*
+ * Pin config fixes
+ */
+enum {
+ PINFIX_ABIT_AW9D_MAX
+};
+
+static struct alc_pincfg alc882_abit_aw9d_pinfix[] = {
+ { 0x15, 0x01080104 }, /* side */
+ { 0x16, 0x01011012 }, /* rear */
+ { 0x17, 0x01016011 }, /* clfe */
+ { }
+};
+
+static const struct alc_pincfg *alc882_pin_fixes[] = {
+ [PINFIX_ABIT_AW9D_MAX] = alc882_abit_aw9d_pinfix,
+};
+
+static struct snd_pci_quirk alc882_pinfix_tbl[] = {
+ SND_PCI_QUIRK(0x147b, 0x107a, "Abit AW9D-MAX", PINFIX_ABIT_AW9D_MAX),
+ {}
+};
+
/*
* BIOS auto configuration
*/
-static void alc883_auto_set_output_and_unmute(struct hda_codec *codec,
+static int alc882_auto_create_input_ctls(struct hda_codec *codec,
+ const struct auto_pin_cfg *cfg)
+{
+ return alc_auto_create_input_ctls(codec, cfg, 0x0b, 0x23, 0x22);
+}
+
+static void alc882_auto_set_output_and_unmute(struct hda_codec *codec,
hda_nid_t nid, int pin_type,
int dac_idx)
{
}
-static void alc883_auto_init_multi_out(struct hda_codec *codec)
+static void alc882_auto_init_multi_out(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
int i;
hda_nid_t nid = spec->autocfg.line_out_pins[i];
int pin_type = get_pin_type(spec->autocfg.line_out_type);
if (nid)
- alc883_auto_set_output_and_unmute(codec, nid, pin_type,
+ alc882_auto_set_output_and_unmute(codec, nid, pin_type,
i);
}
}
-static void alc883_auto_init_hp_out(struct hda_codec *codec)
+static void alc882_auto_init_hp_out(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
hda_nid_t pin;
pin = spec->autocfg.hp_pins[0];
if (pin) /* connect to front */
/* use dac 0 */
- alc883_auto_set_output_and_unmute(codec, pin, PIN_HP, 0);
+ alc882_auto_set_output_and_unmute(codec, pin, PIN_HP, 0);
pin = spec->autocfg.speaker_pins[0];
if (pin)
- alc883_auto_set_output_and_unmute(codec, pin, PIN_OUT, 0);
+ alc882_auto_set_output_and_unmute(codec, pin, PIN_OUT, 0);
}
-#define alc883_is_input_pin(nid) alc880_is_input_pin(nid)
-#define ALC883_PIN_CD_NID ALC880_PIN_CD_NID
-
-static void alc883_auto_init_analog_input(struct hda_codec *codec)
+static void alc882_auto_init_analog_input(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
int i;
for (i = 0; i < AUTO_PIN_LAST; i++) {
hda_nid_t nid = spec->autocfg.input_pins[i];
- if (alc883_is_input_pin(nid)) {
- alc_set_input_pin(codec, nid, i);
- if (nid != ALC883_PIN_CD_NID &&
- (get_wcaps(codec, nid) & AC_WCAP_OUT_AMP))
+ if (!nid)
+ continue;
+ alc_set_input_pin(codec, nid, i);
+ if (get_wcaps(codec, nid) & AC_WCAP_OUT_AMP)
+ snd_hda_codec_write(codec, nid, 0,
+ AC_VERB_SET_AMP_GAIN_MUTE,
+ AMP_OUT_MUTE);
+ }
+}
+
+static void alc882_auto_init_input_src(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ int c;
+
+ for (c = 0; c < spec->num_adc_nids; c++) {
+ hda_nid_t conn_list[HDA_MAX_NUM_INPUTS];
+ hda_nid_t nid = spec->capsrc_nids[c];
+ unsigned int mux_idx;
+ const struct hda_input_mux *imux;
+ int conns, mute, idx, item;
+
+ conns = snd_hda_get_connections(codec, nid, conn_list,
+ ARRAY_SIZE(conn_list));
+ if (conns < 0)
+ continue;
+ mux_idx = c >= spec->num_mux_defs ? 0 : c;
+ imux = &spec->input_mux[mux_idx];
+ for (idx = 0; idx < conns; idx++) {
+ /* if the current connection is the selected one,
+ * unmute it as default - otherwise mute it
+ */
+ mute = AMP_IN_MUTE(idx);
+ for (item = 0; item < imux->num_items; item++) {
+ if (imux->items[item].index == idx) {
+ if (spec->cur_mux[c] == item)
+ mute = AMP_IN_UNMUTE(idx);
+ break;
+ }
+ }
+ /* check if we have a selector or mixer
+ * we could check for the widget type instead, but
+ * just check for Amp-In presence (in case of mixer
+ * without amp-in there is something wrong, this
+ * function shouldn't be used or capsrc nid is wrong)
+ */
+ if (get_wcaps(codec, nid) & AC_WCAP_IN_AMP)
snd_hda_codec_write(codec, nid, 0,
AC_VERB_SET_AMP_GAIN_MUTE,
- AMP_OUT_MUTE);
+ mute);
+ else if (mute != AMP_IN_MUTE(idx))
+ snd_hda_codec_write(codec, nid, 0,
+ AC_VERB_SET_CONNECT_SEL,
+ idx);
}
}
}
-#define alc883_auto_init_input_src alc882_auto_init_input_src
+/* add mic boosts if needed */
+static int alc_auto_add_mic_boost(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ int err;
+ hda_nid_t nid;
+
+ nid = spec->autocfg.input_pins[AUTO_PIN_MIC];
+ if (nid && (get_wcaps(codec, nid) & AC_WCAP_IN_AMP)) {
+ err = add_control(spec, ALC_CTL_WIDGET_VOL,
+ "Mic Boost",
+ HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_INPUT));
+ if (err < 0)
+ return err;
+ }
+ nid = spec->autocfg.input_pins[AUTO_PIN_FRONT_MIC];
+ if (nid && (get_wcaps(codec, nid) & AC_WCAP_IN_AMP)) {
+ err = add_control(spec, ALC_CTL_WIDGET_VOL,
+ "Front Mic Boost",
+ HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_INPUT));
+ if (err < 0)
+ return err;
+ }
+ return 0;
+}
/* almost identical with ALC880 parser... */
-static int alc883_parse_auto_config(struct hda_codec *codec)
+static int alc882_parse_auto_config(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
- int err = alc880_parse_auto_config(codec);
- struct auto_pin_cfg *cfg = &spec->autocfg;
- int i;
+ static hda_nid_t alc882_ignore[] = { 0x1d, 0 };
+ int i, err;
+ err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
+ alc882_ignore);
if (err < 0)
return err;
- else if (!err)
- return 0; /* no config found */
+ if (!spec->autocfg.line_outs)
+ return 0; /* can't find valid BIOS pin config */
- err = alc_auto_add_mic_boost(codec);
+ err = alc880_auto_fill_dac_nids(spec, &spec->autocfg);
+ if (err < 0)
+ return err;
+ err = alc880_auto_create_multi_out_ctls(spec, &spec->autocfg);
+ if (err < 0)
+ return err;
+ err = alc880_auto_create_extra_out(spec,
+ spec->autocfg.speaker_pins[0],
+ "Speaker");
+ if (err < 0)
+ return err;
+ err = alc880_auto_create_extra_out(spec, spec->autocfg.hp_pins[0],
+ "Headphone");
+ if (err < 0)
+ return err;
+ err = alc882_auto_create_input_ctls(codec, &spec->autocfg);
if (err < 0)
return err;
- /* hack - override the init verbs */
- spec->init_verbs[0] = alc883_auto_init_verbs;
+ spec->multiout.max_channels = spec->multiout.num_dacs * 2;
- /* setup input_mux for ALC889 */
- if (codec->vendor_id == 0x10ec0889) {
- /* digital-mic input pin is excluded in alc880_auto_create..()
- * because it's under 0x18
- */
- if (cfg->input_pins[AUTO_PIN_MIC] == 0x12 ||
- cfg->input_pins[AUTO_PIN_FRONT_MIC] == 0x12) {
- struct hda_input_mux *imux = &spec->private_imux[0];
- for (i = 1; i < 3; i++)
- memcpy(&spec->private_imux[i],
- &spec->private_imux[0],
- sizeof(spec->private_imux[0]));
- imux->items[imux->num_items].label = "Int DMic";
- imux->items[imux->num_items].index = 0x0b;
- imux->num_items++;
- spec->num_mux_defs = 3;
- spec->input_mux = spec->private_imux;
+ /* check multiple SPDIF-out (for recent codecs) */
+ for (i = 0; i < spec->autocfg.dig_outs; i++) {
+ hda_nid_t dig_nid;
+ err = snd_hda_get_connections(codec,
+ spec->autocfg.dig_out_pins[i],
+ &dig_nid, 1);
+ if (err < 0)
+ continue;
+ if (!i)
+ spec->multiout.dig_out_nid = dig_nid;
+ else {
+ spec->multiout.slave_dig_outs = spec->slave_dig_outs;
+ spec->slave_dig_outs[i - 1] = dig_nid;
+ if (i == ARRAY_SIZE(spec->slave_dig_outs) - 1)
+ break;
}
}
+ if (spec->autocfg.dig_in_pin)
+ spec->dig_in_nid = ALC880_DIGIN_NID;
+
+ if (spec->kctls.list)
+ add_mixer(spec, spec->kctls.list);
+
+ add_verb(spec, alc883_auto_init_verbs);
+ /* if ADC 0x07 is available, initialize it, too */
+ if (get_wcaps_type(get_wcaps(codec, 0x07)) == AC_WID_AUD_IN)
+ add_verb(spec, alc882_adc1_init_verbs);
+
+ spec->num_mux_defs = 1;
+ spec->input_mux = &spec->private_imux[0];
+
+ alc_ssid_check(codec, 0x15, 0x1b, 0x14);
+
+ err = alc_auto_add_mic_boost(codec);
+ if (err < 0)
+ return err;
return 1; /* config found */
}
/* additional initialization for auto-configuration model */
-static void alc883_auto_init(struct hda_codec *codec)
+static void alc882_auto_init(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
- alc883_auto_init_multi_out(codec);
- alc883_auto_init_hp_out(codec);
- alc883_auto_init_analog_input(codec);
- alc883_auto_init_input_src(codec);
+ alc882_auto_init_multi_out(codec);
+ alc882_auto_init_hp_out(codec);
+ alc882_auto_init_analog_input(codec);
+ alc882_auto_init_input_src(codec);
if (spec->unsol_event)
alc_inithook(codec);
}
-static int patch_alc883(struct hda_codec *codec)
+static int patch_alc882(struct hda_codec *codec)
{
struct alc_spec *spec;
int err, board_config;
if (spec == NULL)
return -ENOMEM;
- codec->spec = spec;
+ codec->spec = spec;
+
+ switch (codec->vendor_id) {
+ case 0x10ec0882:
+ case 0x10ec0885:
+ break;
+ default:
+ /* ALC883 and variants */
+ alc_fix_pll_init(codec, 0x20, 0x0a, 10);
+ break;
+ }
+
+ board_config = snd_hda_check_board_config(codec, ALC882_MODEL_LAST,
+ alc882_models,
+ alc882_cfg_tbl);
- alc_fix_pll_init(codec, 0x20, 0x0a, 10);
+ if (board_config < 0 || board_config >= ALC882_MODEL_LAST)
+ board_config = snd_hda_check_board_codec_sid_config(codec,
+ ALC882_MODEL_LAST, alc882_models, alc882_ssid_cfg_tbl);
- board_config = snd_hda_check_board_config(codec, ALC883_MODEL_LAST,
- alc883_models,
- alc883_cfg_tbl);
- if (board_config < 0 || board_config >= ALC883_MODEL_LAST) {
- /* Pick up systems that don't supply PCI SSID */
- switch (codec->subsystem_id) {
- case 0x106b3600: /* Macbook 3.1 */
- board_config = ALC889A_MB31;
- break;
- default:
- printk(KERN_INFO
- "hda_codec: Unknown model for %s, trying "
- "auto-probe from BIOS...\n", codec->chip_name);
- board_config = ALC883_AUTO;
- }
+ if (board_config < 0 || board_config >= ALC882_MODEL_LAST) {
+ printk(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
+ codec->chip_name);
+ board_config = ALC882_AUTO;
}
- if (board_config == ALC883_AUTO) {
+ alc_fix_pincfg(codec, alc882_pinfix_tbl, alc882_pin_fixes);
+
+ if (board_config == ALC882_AUTO) {
/* automatic parse from the BIOS config */
- err = alc883_parse_auto_config(codec);
+ err = alc882_parse_auto_config(codec);
if (err < 0) {
alc_free(codec);
return err;
printk(KERN_INFO
"hda_codec: Cannot set up configuration "
"from BIOS. Using base mode...\n");
- board_config = ALC883_3ST_2ch_DIG;
+ board_config = ALC882_3ST_DIG;
}
}
return err;
}
- if (board_config != ALC883_AUTO)
- setup_preset(spec, &alc883_presets[board_config]);
+ if (board_config != ALC882_AUTO)
+ setup_preset(codec, &alc882_presets[board_config]);
- switch (codec->vendor_id) {
- case 0x10ec0888:
- if (!spec->num_adc_nids) {
- spec->num_adc_nids = ARRAY_SIZE(alc883_adc_nids);
- spec->adc_nids = alc883_adc_nids;
- }
- if (!spec->capsrc_nids)
- spec->capsrc_nids = alc883_capsrc_nids;
+ spec->stream_analog_playback = &alc882_pcm_analog_playback;
+ spec->stream_analog_capture = &alc882_pcm_analog_capture;
+ /* FIXME: setup DAC5 */
+ /*spec->stream_analog_alt_playback = &alc880_pcm_analog_alt_playback;*/
+ spec->stream_analog_alt_capture = &alc880_pcm_analog_alt_capture;
+
+ spec->stream_digital_playback = &alc882_pcm_digital_playback;
+ spec->stream_digital_capture = &alc882_pcm_digital_capture;
+
+ if (codec->vendor_id == 0x10ec0888)
spec->init_amp = ALC_INIT_DEFAULT; /* always initialize */
- break;
- case 0x10ec0889:
- if (!spec->num_adc_nids) {
- spec->num_adc_nids = ARRAY_SIZE(alc889_adc_nids);
- spec->adc_nids = alc889_adc_nids;
- }
- if (!spec->capsrc_nids)
- spec->capsrc_nids = alc889_capsrc_nids;
- break;
- default:
- if (!spec->num_adc_nids) {
- spec->num_adc_nids = ARRAY_SIZE(alc883_adc_nids);
- spec->adc_nids = alc883_adc_nids;
+
+ if (!spec->adc_nids && spec->input_mux) {
+ int i;
+ spec->num_adc_nids = 0;
+ for (i = 0; i < ARRAY_SIZE(alc882_adc_nids); i++) {
+ hda_nid_t cap;
+ hda_nid_t nid = alc882_adc_nids[i];
+ unsigned int wcap = get_wcaps(codec, nid);
+ /* get type */
+ wcap = get_wcaps_type(wcap);
+ if (wcap != AC_WID_AUD_IN)
+ continue;
+ spec->private_adc_nids[spec->num_adc_nids] = nid;
+ err = snd_hda_get_connections(codec, nid, &cap, 1);
+ if (err < 0)
+ continue;
+ spec->private_capsrc_nids[spec->num_adc_nids] = cap;
+ spec->num_adc_nids++;
}
- if (!spec->capsrc_nids)
- spec->capsrc_nids = alc883_capsrc_nids;
- break;
+ spec->adc_nids = spec->private_adc_nids;
+ spec->capsrc_nids = spec->private_capsrc_nids;
}
- spec->stream_analog_playback = &alc883_pcm_analog_playback;
- spec->stream_analog_capture = &alc883_pcm_analog_capture;
- spec->stream_analog_alt_capture = &alc883_pcm_analog_alt_capture;
-
- spec->stream_digital_playback = &alc883_pcm_digital_playback;
- spec->stream_digital_capture = &alc883_pcm_digital_capture;
-
- if (!spec->cap_mixer)
- set_capture_mixer(spec);
+ set_capture_mixer(codec);
set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
spec->vmaster_nid = 0x0c;
codec->patch_ops = alc_patch_ops;
- if (board_config == ALC883_AUTO)
- spec->init_hook = alc883_auto_init;
-
+ if (board_config == ALC882_AUTO)
+ spec->init_hook = alc882_auto_init;
#ifdef CONFIG_SND_HDA_POWER_SAVE
if (!spec->loopback.amplist)
- spec->loopback.amplist = alc883_loopbacks;
+ spec->loopback.amplist = alc882_loopbacks;
#endif
codec->proc_widget_hook = print_realtek_coef;
return 0;
}
+
/*
* ALC262 support
*/
};
/* mute/unmute internal speaker according to the hp jack and mute state */
-static void alc262_hp_t5735_init_hook(struct hda_codec *codec)
+static void alc262_hp_t5735_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x15;
spec->autocfg.speaker_pins[0] = 0x0c; /* HACK: not actually a pin */
- alc_automute_amp(codec);
}
static struct snd_kcontrol_new alc262_hp_t5735_mixer[] = {
alc262_hippo_automute(codec);
}
-static void alc262_hippo_init_hook(struct hda_codec *codec)
+static void alc262_hippo_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x15;
spec->autocfg.speaker_pins[0] = 0x14;
- alc262_hippo_automute(codec);
}
-static void alc262_hippo1_init_hook(struct hda_codec *codec)
+static void alc262_hippo1_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x1b;
spec->autocfg.speaker_pins[0] = 0x14;
- alc262_hippo_automute(codec);
}
};
/* unsolicited event for HP jack sensing */
-static void alc262_tyan_init_hook(struct hda_codec *codec)
+static void alc262_tyan_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x1b;
spec->autocfg.speaker_pins[0] = 0x15;
- alc_automute_amp(codec);
}
{ }
};
-static struct hda_verb alc262_hippo_unsol_verbs[] = {
- {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT},
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {}
-};
-
static struct hda_verb alc262_hippo1_unsol_verbs[] = {
{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0},
{0x1b, AC_VERB_SET_CONNECT_SEL, 0x00},
{}
};
-static struct hda_input_mux alc262_dmic_capture_source = {
- .num_items = 2,
- .items = {
- { "Int DMic", 0x9 },
- { "Mic", 0x0 },
- },
-};
-
static struct snd_kcontrol_new alc262_toshiba_s06_mixer[] = {
HDA_CODEC_VOLUME("Speaker Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT),
{}
};
-static void alc262_dmic_automute(struct hda_codec *codec)
-{
- unsigned int present;
-
- present = snd_hda_codec_read(codec, 0x18, 0,
- AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
- snd_hda_codec_write(codec, 0x22, 0,
- AC_VERB_SET_CONNECT_SEL, present ? 0x0 : 0x09);
-}
-
-
-/* unsolicited event for HP jack sensing */
-static void alc262_toshiba_s06_unsol_event(struct hda_codec *codec,
- unsigned int res)
-{
- if ((res >> 26) == ALC880_MIC_EVENT)
- alc262_dmic_automute(codec);
- else
- alc_sku_unsol_event(codec, res);
-}
-
-static void alc262_toshiba_s06_init_hook(struct hda_codec *codec)
+static void alc262_toshiba_s06_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x15;
spec->autocfg.speaker_pins[0] = 0x14;
- alc_automute_pin(codec);
- alc262_dmic_automute(codec);
+ spec->ext_mic.pin = 0x18;
+ spec->ext_mic.mux_idx = 0;
+ spec->int_mic.pin = 0x12;
+ spec->int_mic.mux_idx = 9;
+ spec->auto_mic = 1;
}
/*
alc262_lenovo_3000_automute(codec, 1);
}
+static int amp_stereo_mute_update(struct hda_codec *codec, hda_nid_t nid,
+ int dir, int idx, long *valp)
+{
+ int i, change = 0;
+
+ for (i = 0; i < 2; i++, valp++)
+ change |= snd_hda_codec_amp_update(codec, nid, i, dir, idx,
+ HDA_AMP_MUTE,
+ *valp ? 0 : HDA_AMP_MUTE);
+ return change;
+}
+
/* bind hp and internal speaker mute (with plug check) */
static int alc262_fujitsu_master_sw_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
long *valp = ucontrol->value.integer.value;
int change;
- change = snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
- HDA_AMP_MUTE,
- valp ? 0 : HDA_AMP_MUTE);
- change |= snd_hda_codec_amp_stereo(codec, 0x1b, HDA_OUTPUT, 0,
- HDA_AMP_MUTE,
- valp ? 0 : HDA_AMP_MUTE);
-
+ change = amp_stereo_mute_update(codec, 0x14, HDA_OUTPUT, 0, valp);
+ change |= amp_stereo_mute_update(codec, 0x1b, HDA_OUTPUT, 0, valp);
if (change)
alc262_fujitsu_automute(codec, 0);
return change;
long *valp = ucontrol->value.integer.value;
int change;
- change = snd_hda_codec_amp_stereo(codec, 0x1b, HDA_OUTPUT, 0,
- HDA_AMP_MUTE,
- valp ? 0 : HDA_AMP_MUTE);
-
+ change = amp_stereo_mute_update(codec, 0x1b, HDA_OUTPUT, 0, valp);
if (change)
alc262_lenovo_3000_automute(codec, 0);
return change;
{ } /* end */
};
+/* We use two mixers depending on the output pin; 0x16 is a mono output
+ * and thus it's bound with a different mixer.
+ * This function returns which mixer amp should be used.
+ */
+static int alc262_check_volbit(hda_nid_t nid)
+{
+ if (!nid)
+ return 0;
+ else if (nid == 0x16)
+ return 2;
+ else
+ return 1;
+}
+
+static int alc262_add_out_vol_ctl(struct alc_spec *spec, hda_nid_t nid,
+ const char *pfx, int *vbits)
+{
+ char name[32];
+ unsigned long val;
+ int vbit;
+
+ vbit = alc262_check_volbit(nid);
+ if (!vbit)
+ return 0;
+ if (*vbits & vbit) /* a volume control for this mixer already there */
+ return 0;
+ *vbits |= vbit;
+ snprintf(name, sizeof(name), "%s Playback Volume", pfx);
+ if (vbit == 2)
+ val = HDA_COMPOSE_AMP_VAL(0x0e, 2, 0, HDA_OUTPUT);
+ else
+ val = HDA_COMPOSE_AMP_VAL(0x0c, 3, 0, HDA_OUTPUT);
+ return add_control(spec, ALC_CTL_WIDGET_VOL, name, val);
+}
+
+static int alc262_add_out_sw_ctl(struct alc_spec *spec, hda_nid_t nid,
+ const char *pfx)
+{
+ char name[32];
+ unsigned long val;
+
+ if (!nid)
+ return 0;
+ snprintf(name, sizeof(name), "%s Playback Switch", pfx);
+ if (nid == 0x16)
+ val = HDA_COMPOSE_AMP_VAL(nid, 2, 0, HDA_OUTPUT);
+ else
+ val = HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT);
+ return add_control(spec, ALC_CTL_WIDGET_MUTE, name, val);
+}
+
/* add playback controls from the parsed DAC table */
static int alc262_auto_create_multi_out_ctls(struct alc_spec *spec,
const struct auto_pin_cfg *cfg)
{
- hda_nid_t nid;
+ const char *pfx;
+ int vbits;
int err;
spec->multiout.num_dacs = 1; /* only use one dac */
spec->multiout.dac_nids = spec->private_dac_nids;
spec->multiout.dac_nids[0] = 2;
- nid = cfg->line_out_pins[0];
- if (nid) {
- err = add_control(spec, ALC_CTL_WIDGET_VOL,
- "Front Playback Volume",
- HDA_COMPOSE_AMP_VAL(0x0c, 3, 0, HDA_OUTPUT));
- if (err < 0)
- return err;
- err = add_control(spec, ALC_CTL_WIDGET_MUTE,
- "Front Playback Switch",
- HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT));
- if (err < 0)
- return err;
- }
-
- nid = cfg->speaker_pins[0];
- if (nid) {
- if (nid == 0x16) {
- err = add_control(spec, ALC_CTL_WIDGET_VOL,
- "Speaker Playback Volume",
- HDA_COMPOSE_AMP_VAL(0x0e, 2, 0,
- HDA_OUTPUT));
- if (err < 0)
- return err;
- err = add_control(spec, ALC_CTL_WIDGET_MUTE,
- "Speaker Playback Switch",
- HDA_COMPOSE_AMP_VAL(nid, 2, 0,
- HDA_OUTPUT));
- if (err < 0)
- return err;
- } else {
- err = add_control(spec, ALC_CTL_WIDGET_MUTE,
- "Speaker Playback Switch",
- HDA_COMPOSE_AMP_VAL(nid, 3, 0,
- HDA_OUTPUT));
- if (err < 0)
- return err;
- }
- }
- nid = cfg->hp_pins[0];
- if (nid) {
- /* spec->multiout.hp_nid = 2; */
- if (nid == 0x16) {
- err = add_control(spec, ALC_CTL_WIDGET_VOL,
- "Headphone Playback Volume",
- HDA_COMPOSE_AMP_VAL(0x0e, 2, 0,
- HDA_OUTPUT));
- if (err < 0)
- return err;
- err = add_control(spec, ALC_CTL_WIDGET_MUTE,
- "Headphone Playback Switch",
- HDA_COMPOSE_AMP_VAL(nid, 2, 0,
- HDA_OUTPUT));
- if (err < 0)
- return err;
- } else {
- err = add_control(spec, ALC_CTL_WIDGET_MUTE,
- "Headphone Playback Switch",
- HDA_COMPOSE_AMP_VAL(nid, 3, 0,
- HDA_OUTPUT));
- if (err < 0)
- return err;
- }
- }
- return 0;
-}
-
-static int alc262_auto_create_analog_input_ctls(struct alc_spec *spec,
- const struct auto_pin_cfg *cfg)
-{
- int err;
+ if (!cfg->speaker_pins[0] && !cfg->hp_pins[0])
+ pfx = "Master";
+ else if (cfg->line_out_type == AUTO_PIN_SPEAKER_OUT)
+ pfx = "Speaker";
+ else
+ pfx = "Front";
+ err = alc262_add_out_sw_ctl(spec, cfg->line_out_pins[0], pfx);
+ if (err < 0)
+ return err;
+ err = alc262_add_out_sw_ctl(spec, cfg->speaker_pins[0], "Speaker");
+ if (err < 0)
+ return err;
+ err = alc262_add_out_sw_ctl(spec, cfg->hp_pins[0], "Headphone");
+ if (err < 0)
+ return err;
- err = alc880_auto_create_analog_input_ctls(spec, cfg);
+ vbits = alc262_check_volbit(cfg->line_out_pins[0]) |
+ alc262_check_volbit(cfg->speaker_pins[0]) |
+ alc262_check_volbit(cfg->hp_pins[0]);
+ if (vbits == 1 || vbits == 2)
+ pfx = "Master"; /* only one mixer is used */
+ else if (cfg->line_out_type == AUTO_PIN_SPEAKER_OUT)
+ pfx = "Speaker";
+ else
+ pfx = "Front";
+ vbits = 0;
+ err = alc262_add_out_vol_ctl(spec, cfg->line_out_pins[0], pfx, &vbits);
+ if (err < 0)
+ return err;
+ err = alc262_add_out_vol_ctl(spec, cfg->speaker_pins[0], "Speaker",
+ &vbits);
+ if (err < 0)
+ return err;
+ err = alc262_add_out_vol_ctl(spec, cfg->hp_pins[0], "Headphone",
+ &vbits);
if (err < 0)
return err;
- /* digital-mic input pin is excluded in alc880_auto_create..()
- * because it's under 0x18
- */
- if (cfg->input_pins[AUTO_PIN_MIC] == 0x12 ||
- cfg->input_pins[AUTO_PIN_FRONT_MIC] == 0x12) {
- struct hda_input_mux *imux = &spec->private_imux[0];
- imux->items[imux->num_items].label = "Int Mic";
- imux->items[imux->num_items].index = 0x09;
- imux->num_items++;
- }
return 0;
}
+#define alc262_auto_create_input_ctls \
+ alc880_auto_create_input_ctls
/*
* generic initialization of ADC, input mixers and output mixers
err = alc262_auto_create_multi_out_ctls(spec, &spec->autocfg);
if (err < 0)
return err;
- err = alc262_auto_create_analog_input_ctls(spec, &spec->autocfg);
+ err = alc262_auto_create_input_ctls(codec, &spec->autocfg);
if (err < 0)
return err;
},
[ALC262_HIPPO] = {
.mixers = { alc262_hippo_mixer },
- .init_verbs = { alc262_init_verbs, alc262_hippo_unsol_verbs},
+ .init_verbs = { alc262_init_verbs, alc_hp15_unsol_verbs},
.num_dacs = ARRAY_SIZE(alc262_dac_nids),
.dac_nids = alc262_dac_nids,
.hp_nid = 0x03,
.channel_mode = alc262_modes,
.input_mux = &alc262_capture_source,
.unsol_event = alc262_hippo_unsol_event,
- .init_hook = alc262_hippo_init_hook,
+ .setup = alc262_hippo_setup,
+ .init_hook = alc262_hippo_automute,
},
[ALC262_HIPPO_1] = {
.mixers = { alc262_hippo1_mixer },
.channel_mode = alc262_modes,
.input_mux = &alc262_capture_source,
.unsol_event = alc262_hippo_unsol_event,
- .init_hook = alc262_hippo1_init_hook,
+ .setup = alc262_hippo1_setup,
+ .init_hook = alc262_hippo_automute,
},
[ALC262_FUJITSU] = {
.mixers = { alc262_fujitsu_mixer },
.channel_mode = alc262_modes,
.input_mux = &alc262_capture_source,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc262_hp_t5735_init_hook,
+ .setup = alc262_hp_t5735_setup,
+ .init_hook = alc_automute_amp,
},
[ALC262_HP_RP5700] = {
.mixers = { alc262_hp_rp5700_mixer },
.channel_mode = alc262_modes,
.input_mux = &alc262_capture_source,
.unsol_event = alc262_hippo_unsol_event,
- .init_hook = alc262_hippo_init_hook,
+ .setup = alc262_hippo_setup,
+ .init_hook = alc262_hippo_automute,
},
[ALC262_BENQ_T31] = {
.mixers = { alc262_benq_t31_mixer },
- .init_verbs = { alc262_init_verbs, alc262_benq_t31_EAPD_verbs, alc262_hippo_unsol_verbs },
+ .init_verbs = { alc262_init_verbs, alc262_benq_t31_EAPD_verbs,
+ alc_hp15_unsol_verbs },
.num_dacs = ARRAY_SIZE(alc262_dac_nids),
.dac_nids = alc262_dac_nids,
.hp_nid = 0x03,
.channel_mode = alc262_modes,
.input_mux = &alc262_capture_source,
.unsol_event = alc262_hippo_unsol_event,
- .init_hook = alc262_hippo_init_hook,
+ .setup = alc262_hippo_setup,
+ .init_hook = alc262_hippo_automute,
},
[ALC262_ULTRA] = {
.mixers = { alc262_ultra_mixer },
.dig_out_nid = ALC262_DIGOUT_NID,
.num_channel_mode = ARRAY_SIZE(alc262_modes),
.channel_mode = alc262_modes,
- .input_mux = &alc262_dmic_capture_source,
- .unsol_event = alc262_toshiba_s06_unsol_event,
- .init_hook = alc262_toshiba_s06_init_hook,
+ .unsol_event = alc_sku_unsol_event,
+ .setup = alc262_toshiba_s06_setup,
+ .init_hook = alc_inithook,
},
[ALC262_TOSHIBA_RX1] = {
.mixers = { alc262_toshiba_rx1_mixer },
.channel_mode = alc262_modes,
.input_mux = &alc262_capture_source,
.unsol_event = alc262_hippo_unsol_event,
- .init_hook = alc262_hippo_init_hook,
+ .setup = alc262_hippo_setup,
+ .init_hook = alc262_hippo_automute,
},
[ALC262_TYAN] = {
.mixers = { alc262_tyan_mixer },
.channel_mode = alc262_modes,
.input_mux = &alc262_capture_source,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc262_tyan_init_hook,
+ .setup = alc262_tyan_setup,
+ .init_hook = alc_automute_amp,
},
};
alc262_cfg_tbl);
if (board_config < 0) {
- printk(KERN_INFO "hda_codec: Unknown model for %s, "
- "trying auto-probe from BIOS...\n", codec->chip_name);
+ printk(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
+ codec->chip_name);
board_config = ALC262_AUTO;
}
}
if (board_config != ALC262_AUTO)
- setup_preset(spec, &alc262_presets[board_config]);
+ setup_preset(codec, &alc262_presets[board_config]);
spec->stream_analog_playback = &alc262_pcm_analog_playback;
spec->stream_analog_capture = &alc262_pcm_analog_capture;
unsigned int wcap = get_wcaps(codec, 0x07);
/* get type */
- wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
+ wcap = get_wcaps_type(wcap);
if (wcap != AC_WID_AUD_IN) {
spec->adc_nids = alc262_adc_nids_alt;
spec->num_adc_nids =
}
}
if (!spec->cap_mixer && !spec->no_analog)
- set_capture_mixer(spec);
+ set_capture_mixer(codec);
if (!spec->no_analog)
set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
{ } /* end */
};
-static struct hda_input_mux alc268_acer_lc_capture_source = {
- .num_items = 2,
- .items = {
- { "i-Mic", 0x6 },
- { "E-Mic", 0x0 },
- },
-};
-
/* Acer specific */
/* bind volumes of both NID 0x02 and 0x03 */
static struct hda_bind_ctls alc268_acer_bind_master_vol = {
long *valp = ucontrol->value.integer.value;
int change;
- change = snd_hda_codec_amp_update(codec, 0x14, 0, HDA_OUTPUT, 0,
- HDA_AMP_MUTE,
- valp[0] ? 0 : HDA_AMP_MUTE);
- change |= snd_hda_codec_amp_update(codec, 0x14, 1, HDA_OUTPUT, 0,
- HDA_AMP_MUTE,
- valp[1] ? 0 : HDA_AMP_MUTE);
+ change = amp_stereo_mute_update(codec, 0x14, HDA_OUTPUT, 0, valp);
if (change)
alc268_acer_automute(codec, 0);
return change;
/* unsolicited event for HP jack sensing */
#define alc268_toshiba_unsol_event alc262_hippo_unsol_event
-#define alc268_toshiba_init_hook alc262_hippo_init_hook
+#define alc268_toshiba_setup alc262_hippo_setup
+#define alc268_toshiba_automute alc262_hippo_automute
static void alc268_acer_unsol_event(struct hda_codec *codec,
unsigned int res)
AMP_IN_MUTE(0), bits);
}
-
-static void alc268_acer_mic_automute(struct hda_codec *codec)
-{
- unsigned int present;
-
- present = snd_hda_codec_read(codec, 0x18, 0,
- AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
- snd_hda_codec_write(codec, 0x23, 0, AC_VERB_SET_CONNECT_SEL,
- present ? 0x0 : 0x6);
-}
-
static void alc268_acer_lc_unsol_event(struct hda_codec *codec,
unsigned int res)
{
- if ((res >> 26) == ALC880_HP_EVENT)
+ switch (res >> 26) {
+ case ALC880_HP_EVENT:
alc268_aspire_one_speaker_automute(codec);
- if ((res >> 26) == ALC880_MIC_EVENT)
- alc268_acer_mic_automute(codec);
+ break;
+ case ALC880_MIC_EVENT:
+ alc_mic_automute(codec);
+ break;
+ }
+}
+
+static void alc268_acer_lc_setup(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ spec->ext_mic.pin = 0x18;
+ spec->ext_mic.mux_idx = 0;
+ spec->int_mic.pin = 0x12;
+ spec->int_mic.mux_idx = 6;
+ spec->auto_mic = 1;
}
static void alc268_acer_lc_init_hook(struct hda_codec *codec)
{
alc268_aspire_one_speaker_automute(codec);
- alc268_acer_mic_automute(codec);
+ alc_mic_automute(codec);
}
static struct snd_kcontrol_new alc268_dell_mixer[] = {
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
+ {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_MIC_EVENT | AC_USRSP_EN},
{ }
};
/* mute/unmute internal speaker according to the hp jack and mute state */
-static void alc268_dell_init_hook(struct hda_codec *codec)
+static void alc268_dell_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x15;
spec->autocfg.speaker_pins[0] = 0x14;
- alc_automute_pin(codec);
+ spec->ext_mic.pin = 0x18;
+ spec->ext_mic.mux_idx = 0;
+ spec->int_mic.pin = 0x19;
+ spec->int_mic.mux_idx = 1;
+ spec->auto_mic = 1;
}
static struct snd_kcontrol_new alc267_quanta_il1_mixer[] = {
{ }
};
-static void alc267_quanta_il1_mic_automute(struct hda_codec *codec)
-{
- unsigned int present;
-
- present = snd_hda_codec_read(codec, 0x18, 0,
- AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
- snd_hda_codec_write(codec, 0x23, 0,
- AC_VERB_SET_CONNECT_SEL,
- present ? 0x00 : 0x01);
-}
-
-static void alc267_quanta_il1_init_hook(struct hda_codec *codec)
+static void alc267_quanta_il1_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
-
spec->autocfg.hp_pins[0] = 0x15;
spec->autocfg.speaker_pins[0] = 0x14;
- alc_automute_pin(codec);
- alc267_quanta_il1_mic_automute(codec);
-}
-
-static void alc267_quanta_il1_unsol_event(struct hda_codec *codec,
- unsigned int res)
-{
- switch (res >> 26) {
- case ALC880_MIC_EVENT:
- alc267_quanta_il1_mic_automute(codec);
- break;
- default:
- alc_sku_unsol_event(codec, res);
- break;
- }
+ spec->ext_mic.pin = 0x18;
+ spec->ext_mic.mux_idx = 0;
+ spec->int_mic.pin = 0x19;
+ spec->int_mic.mux_idx = 1;
+ spec->auto_mic = 1;
}
/*
{ }
};
-static struct snd_kcontrol_new alc268_capture_alt_mixer[] = {
+static struct snd_kcontrol_new alc268_capture_nosrc_mixer[] = {
HDA_CODEC_VOLUME("Capture Volume", 0x23, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Capture Switch", 0x23, 0x0, HDA_OUTPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* The multiple "Capture Source" controls confuse alsamixer
- * So call somewhat different..
- */
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 1,
- .info = alc_mux_enum_info,
- .get = alc_mux_enum_get,
- .put = alc_mux_enum_put,
- },
{ } /* end */
};
-static struct snd_kcontrol_new alc268_capture_mixer[] = {
+static struct snd_kcontrol_new alc268_capture_alt_mixer[] = {
HDA_CODEC_VOLUME("Capture Volume", 0x23, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Capture Switch", 0x23, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x24, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x24, 0x0, HDA_OUTPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* The multiple "Capture Source" controls confuse alsamixer
- * So call somewhat different..
- */
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 2,
- .info = alc_mux_enum_info,
- .get = alc_mux_enum_get,
- .put = alc_mux_enum_put,
- },
+ _DEFINE_CAPSRC(1),
+ { } /* end */
+};
+
+static struct snd_kcontrol_new alc268_capture_mixer[] = {
+ HDA_CODEC_VOLUME("Capture Volume", 0x23, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x23, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x24, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x24, 0x0, HDA_OUTPUT),
+ _DEFINE_CAPSRC(2),
{ } /* end */
};
const char *ctlname, int idx)
{
char name[32];
+ hda_nid_t dac;
int err;
sprintf(name, "%s Playback Volume", ctlname);
- if (nid == 0x14) {
- err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
- HDA_COMPOSE_AMP_VAL(0x02, 3, idx,
- HDA_OUTPUT));
- if (err < 0)
- return err;
- } else if (nid == 0x15) {
+ switch (nid) {
+ case 0x14:
+ case 0x16:
+ dac = 0x02;
+ break;
+ case 0x15:
+ dac = 0x03;
+ break;
+ default:
+ return 0;
+ }
+ if (spec->multiout.dac_nids[0] != dac &&
+ spec->multiout.dac_nids[1] != dac) {
err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
- HDA_COMPOSE_AMP_VAL(0x03, 3, idx,
+ HDA_COMPOSE_AMP_VAL(dac, 3, idx,
HDA_OUTPUT));
if (err < 0)
return err;
- } else
- return -1;
+ spec->multiout.dac_nids[spec->multiout.num_dacs++] = dac;
+ }
+
sprintf(name, "%s Playback Switch", ctlname);
- err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
+ if (nid != 0x16)
+ err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
HDA_COMPOSE_AMP_VAL(nid, 3, idx, HDA_OUTPUT));
+ else /* mono */
+ err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
+ HDA_COMPOSE_AMP_VAL(nid, 2, idx, HDA_OUTPUT));
if (err < 0)
return err;
return 0;
hda_nid_t nid;
int err;
- spec->multiout.num_dacs = 2; /* only use one dac */
spec->multiout.dac_nids = spec->private_dac_nids;
- spec->multiout.dac_nids[0] = 2;
- spec->multiout.dac_nids[1] = 3;
nid = cfg->line_out_pins[0];
- if (nid)
- alc268_new_analog_output(spec, nid, "Front", 0);
+ if (nid) {
+ const char *name;
+ if (cfg->line_out_type == AUTO_PIN_SPEAKER_OUT)
+ name = "Speaker";
+ else
+ name = "Front";
+ err = alc268_new_analog_output(spec, nid, name, 0);
+ if (err < 0)
+ return err;
+ }
nid = cfg->speaker_pins[0];
if (nid == 0x1d) {
HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_INPUT));
if (err < 0)
return err;
+ } else {
+ err = alc268_new_analog_output(spec, nid, "Speaker", 0);
+ if (err < 0)
+ return err;
}
nid = cfg->hp_pins[0];
- if (nid)
- alc268_new_analog_output(spec, nid, "Headphone", 0);
+ if (nid) {
+ err = alc268_new_analog_output(spec, nid, "Headphone", 0);
+ if (err < 0)
+ return err;
+ }
nid = cfg->line_out_pins[1] | cfg->line_out_pins[2];
if (nid == 0x16) {
err = add_control(spec, ALC_CTL_WIDGET_MUTE,
"Mono Playback Switch",
- HDA_COMPOSE_AMP_VAL(nid, 2, 0, HDA_INPUT));
+ HDA_COMPOSE_AMP_VAL(nid, 2, 0, HDA_OUTPUT));
if (err < 0)
return err;
}
}
/* create playback/capture controls for input pins */
-static int alc268_auto_create_analog_input_ctls(struct alc_spec *spec,
+static int alc268_auto_create_input_ctls(struct hda_codec *codec,
const struct auto_pin_cfg *cfg)
{
- struct hda_input_mux *imux = &spec->private_imux[0];
- int i, idx1;
+ return alc_auto_create_input_ctls(codec, cfg, 0, 0x23, 0x24);
+}
- for (i = 0; i < AUTO_PIN_LAST; i++) {
- switch(cfg->input_pins[i]) {
- case 0x18:
- idx1 = 0; /* Mic 1 */
- break;
- case 0x19:
- idx1 = 1; /* Mic 2 */
- break;
- case 0x1a:
- idx1 = 2; /* Line In */
- break;
- case 0x1c:
- idx1 = 3; /* CD */
- break;
- case 0x12:
- case 0x13:
- idx1 = 6; /* digital mics */
- break;
- default:
- continue;
- }
- imux->items[imux->num_items].label = auto_pin_cfg_labels[i];
- imux->items[imux->num_items].index = idx1;
- imux->num_items++;
+static void alc268_auto_set_output_and_unmute(struct hda_codec *codec,
+ hda_nid_t nid, int pin_type)
+{
+ int idx;
+
+ alc_set_pin_output(codec, nid, pin_type);
+ if (nid == 0x14 || nid == 0x16)
+ idx = 0;
+ else
+ idx = 1;
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_CONNECT_SEL, idx);
+}
+
+static void alc268_auto_init_multi_out(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ hda_nid_t nid = spec->autocfg.line_out_pins[0];
+ if (nid) {
+ int pin_type = get_pin_type(spec->autocfg.line_out_type);
+ alc268_auto_set_output_and_unmute(codec, nid, pin_type);
}
- return 0;
+}
+
+static void alc268_auto_init_hp_out(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ hda_nid_t pin;
+
+ pin = spec->autocfg.hp_pins[0];
+ if (pin)
+ alc268_auto_set_output_and_unmute(codec, pin, PIN_HP);
+ pin = spec->autocfg.speaker_pins[0];
+ if (pin)
+ alc268_auto_set_output_and_unmute(codec, pin, PIN_OUT);
}
static void alc268_auto_init_mono_speaker_out(struct hda_codec *codec)
hda_nid_t line_nid = spec->autocfg.line_out_pins[0];
unsigned int dac_vol1, dac_vol2;
- if (speaker_nid) {
+ if (line_nid == 0x1d || speaker_nid == 0x1d) {
snd_hda_codec_write(codec, speaker_nid, 0,
AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT);
+ /* mute mixer inputs from 0x1d */
snd_hda_codec_write(codec, 0x0f, 0,
AC_VERB_SET_AMP_GAIN_MUTE,
AMP_IN_UNMUTE(1));
AC_VERB_SET_AMP_GAIN_MUTE,
AMP_IN_UNMUTE(1));
} else {
+ /* unmute mixer inputs from 0x1d */
snd_hda_codec_write(codec, 0x0f, 0,
AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1));
snd_hda_codec_write(codec, 0x10, 0,
err = alc268_auto_create_multi_out_ctls(spec, &spec->autocfg);
if (err < 0)
return err;
- err = alc268_auto_create_analog_input_ctls(spec, &spec->autocfg);
+ err = alc268_auto_create_input_ctls(codec, &spec->autocfg);
if (err < 0)
return err;
add_mixer(spec, alc268_beep_mixer);
add_verb(spec, alc268_volume_init_verbs);
- spec->num_mux_defs = 1;
+ spec->num_mux_defs = 2;
spec->input_mux = &spec->private_imux[0];
err = alc_auto_add_mic_boost(codec);
return 1;
}
-#define alc268_auto_init_multi_out alc882_auto_init_multi_out
-#define alc268_auto_init_hp_out alc882_auto_init_hp_out
#define alc268_auto_init_analog_input alc882_auto_init_analog_input
/* init callback for auto-configuration model -- overriding the default init */
ALC268_ACER_ASPIRE_ONE),
SND_PCI_QUIRK(0x1028, 0x0253, "Dell OEM", ALC268_DELL),
SND_PCI_QUIRK(0x1028, 0x02b0, "Dell Inspiron Mini9", ALC268_DELL),
+ /* almost compatible with toshiba but with optional digital outs;
+ * auto-probing seems working fine
+ */
SND_PCI_QUIRK_MASK(0x103c, 0xff00, 0x3000, "HP TX25xx series",
- ALC268_TOSHIBA),
+ ALC268_AUTO),
SND_PCI_QUIRK(0x1043, 0x1205, "ASUS W7J", ALC268_3ST),
SND_PCI_QUIRK(0x1170, 0x0040, "ZEPTO", ALC268_ZEPTO),
- SND_PCI_QUIRK_MASK(0x1179, 0xff00, 0xff00, "TOSHIBA A/Lx05",
- ALC268_TOSHIBA),
SND_PCI_QUIRK(0x14c0, 0x0025, "COMPAL IFL90/JFL-92", ALC268_TOSHIBA),
SND_PCI_QUIRK(0x152d, 0x0763, "Diverse (CPR2000)", ALC268_ACER),
SND_PCI_QUIRK(0x152d, 0x0771, "Quanta IL1", ALC267_QUANTA_IL1),
{}
};
+/* Toshiba laptops have no unique PCI SSID but only codec SSID */
+static struct snd_pci_quirk alc268_ssid_cfg_tbl[] = {
+ SND_PCI_QUIRK(0x1179, 0xff0a, "TOSHIBA X-200", ALC268_AUTO),
+ SND_PCI_QUIRK(0x1179, 0xff0e, "TOSHIBA X-200 HDMI", ALC268_AUTO),
+ SND_PCI_QUIRK_MASK(0x1179, 0xff00, 0xff00, "TOSHIBA A/Lx05",
+ ALC268_TOSHIBA),
+ {}
+};
+
static struct alc_config_preset alc268_presets[] = {
[ALC267_QUANTA_IL1] = {
- .mixers = { alc267_quanta_il1_mixer, alc268_beep_mixer },
+ .mixers = { alc267_quanta_il1_mixer, alc268_beep_mixer,
+ alc268_capture_nosrc_mixer },
.init_verbs = { alc268_base_init_verbs, alc268_eapd_verbs,
alc267_quanta_il1_verbs },
.num_dacs = ARRAY_SIZE(alc268_dac_nids),
.hp_nid = 0x03,
.num_channel_mode = ARRAY_SIZE(alc268_modes),
.channel_mode = alc268_modes,
- .input_mux = &alc268_capture_source,
- .unsol_event = alc267_quanta_il1_unsol_event,
- .init_hook = alc267_quanta_il1_init_hook,
+ .unsol_event = alc_sku_unsol_event,
+ .setup = alc267_quanta_il1_setup,
+ .init_hook = alc_inithook,
},
[ALC268_3ST] = {
.mixers = { alc268_base_mixer, alc268_capture_alt_mixer,
.channel_mode = alc268_modes,
.input_mux = &alc268_capture_source,
.unsol_event = alc268_toshiba_unsol_event,
- .init_hook = alc268_toshiba_init_hook,
+ .setup = alc268_toshiba_setup,
+ .init_hook = alc268_toshiba_automute,
},
[ALC268_ACER] = {
- .mixers = { alc268_acer_mixer, alc268_capture_alt_mixer,
+ .mixers = { alc268_acer_mixer, alc268_capture_nosrc_mixer,
alc268_beep_mixer },
.init_verbs = { alc268_base_init_verbs, alc268_eapd_verbs,
alc268_acer_verbs },
[ALC268_ACER_ASPIRE_ONE] = {
.mixers = { alc268_acer_aspire_one_mixer,
alc268_beep_mixer,
- alc268_capture_alt_mixer },
+ alc268_capture_nosrc_mixer },
.init_verbs = { alc268_base_init_verbs, alc268_eapd_verbs,
alc268_acer_aspire_one_verbs },
.num_dacs = ARRAY_SIZE(alc268_dac_nids),
.hp_nid = 0x03,
.num_channel_mode = ARRAY_SIZE(alc268_modes),
.channel_mode = alc268_modes,
- .input_mux = &alc268_acer_lc_capture_source,
.unsol_event = alc268_acer_lc_unsol_event,
+ .setup = alc268_acer_lc_setup,
.init_hook = alc268_acer_lc_init_hook,
},
[ALC268_DELL] = {
- .mixers = { alc268_dell_mixer, alc268_beep_mixer },
+ .mixers = { alc268_dell_mixer, alc268_beep_mixer,
+ alc268_capture_nosrc_mixer },
.init_verbs = { alc268_base_init_verbs, alc268_eapd_verbs,
alc268_dell_verbs },
.num_dacs = ARRAY_SIZE(alc268_dac_nids),
.dac_nids = alc268_dac_nids,
+ .num_adc_nids = ARRAY_SIZE(alc268_adc_nids_alt),
+ .adc_nids = alc268_adc_nids_alt,
+ .capsrc_nids = alc268_capsrc_nids,
.hp_nid = 0x02,
.num_channel_mode = ARRAY_SIZE(alc268_modes),
.channel_mode = alc268_modes,
.unsol_event = alc_sku_unsol_event,
- .init_hook = alc268_dell_init_hook,
- .input_mux = &alc268_capture_source,
+ .setup = alc268_dell_setup,
+ .init_hook = alc_inithook,
},
[ALC268_ZEPTO] = {
.mixers = { alc268_base_mixer, alc268_capture_alt_mixer,
.num_channel_mode = ARRAY_SIZE(alc268_modes),
.channel_mode = alc268_modes,
.input_mux = &alc268_capture_source,
- .unsol_event = alc268_toshiba_unsol_event,
- .init_hook = alc268_toshiba_init_hook
+ .setup = alc268_toshiba_setup,
+ .init_hook = alc268_toshiba_automute,
},
#ifdef CONFIG_SND_DEBUG
[ALC268_TEST] = {
alc268_models,
alc268_cfg_tbl);
+ if (board_config < 0 || board_config >= ALC268_MODEL_LAST)
+ board_config = snd_hda_check_board_codec_sid_config(codec,
+ ALC882_MODEL_LAST, alc268_models, alc268_ssid_cfg_tbl);
+
if (board_config < 0 || board_config >= ALC268_MODEL_LAST) {
- printk(KERN_INFO "hda_codec: Unknown model for %s, "
- "trying auto-probe from BIOS...\n", codec->chip_name);
+ printk(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
+ codec->chip_name);
board_config = ALC268_AUTO;
}
}
if (board_config != ALC268_AUTO)
- setup_preset(spec, &alc268_presets[board_config]);
+ setup_preset(codec, &alc268_presets[board_config]);
spec->stream_analog_playback = &alc268_pcm_analog_playback;
spec->stream_analog_capture = &alc268_pcm_analog_capture;
int i;
/* get type */
- wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
- if (wcap != AC_WID_AUD_IN || spec->input_mux->num_items == 1) {
+ wcap = get_wcaps_type(wcap);
+ if (spec->auto_mic ||
+ wcap != AC_WID_AUD_IN || spec->input_mux->num_items == 1) {
spec->adc_nids = alc268_adc_nids_alt;
spec->num_adc_nids = ARRAY_SIZE(alc268_adc_nids_alt);
- add_mixer(spec, alc268_capture_alt_mixer);
+ if (spec->auto_mic || spec->input_mux->num_items == 1)
+ add_mixer(spec, alc268_capture_nosrc_mixer);
+ else
+ add_mixer(spec, alc268_capture_alt_mixer);
} else {
spec->adc_nids = alc268_adc_nids;
spec->num_adc_nids = ARRAY_SIZE(alc268_adc_nids);
for (i = 0; i < spec->num_adc_nids; i++)
snd_hda_codec_write_cache(codec, alc268_capsrc_nids[i],
0, AC_VERB_SET_CONNECT_SEL,
+ i < spec->num_mux_defs ?
+ spec->input_mux[i].items[0].index :
spec->input_mux->items[0].index);
}
* not a mux!
*/
-static struct hda_input_mux alc269_eeepc_dmic_capture_source = {
- .num_items = 2,
- .items = {
- { "i-Mic", 0x5 },
- { "e-Mic", 0x0 },
- },
-};
-
-static struct hda_input_mux alc269_eeepc_amic_capture_source = {
- .num_items = 2,
- .items = {
- { "i-Mic", 0x1 },
- { "e-Mic", 0x0 },
- },
-};
-
#define alc269_modes alc260_modes
#define alc269_capture_source alc880_lg_lw_capture_source
AC_VERB_SET_PROC_COEF, 0x480);
}
-static void alc269_quanta_fl1_mic_automute(struct hda_codec *codec)
-{
- unsigned int present;
-
- present = snd_hda_codec_read(codec, 0x18, 0,
- AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
- snd_hda_codec_write(codec, 0x23, 0,
- AC_VERB_SET_CONNECT_SEL, present ? 0x0 : 0x1);
-}
-
static void alc269_lifebook_mic_autoswitch(struct hda_codec *codec)
{
unsigned int present_laptop;
static void alc269_quanta_fl1_unsol_event(struct hda_codec *codec,
unsigned int res)
{
- if ((res >> 26) == ALC880_HP_EVENT)
+ switch (res >> 26) {
+ case ALC880_HP_EVENT:
alc269_quanta_fl1_speaker_automute(codec);
- if ((res >> 26) == ALC880_MIC_EVENT)
- alc269_quanta_fl1_mic_automute(codec);
+ break;
+ case ALC880_MIC_EVENT:
+ alc_mic_automute(codec);
+ break;
+ }
}
static void alc269_lifebook_unsol_event(struct hda_codec *codec,
alc269_lifebook_mic_autoswitch(codec);
}
+static void alc269_quanta_fl1_setup(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ spec->ext_mic.pin = 0x18;
+ spec->ext_mic.mux_idx = 0;
+ spec->int_mic.pin = 0x19;
+ spec->int_mic.mux_idx = 1;
+ spec->auto_mic = 1;
+}
+
static void alc269_quanta_fl1_init_hook(struct hda_codec *codec)
{
alc269_quanta_fl1_speaker_automute(codec);
- alc269_quanta_fl1_mic_automute(codec);
+ alc_mic_automute(codec);
}
static void alc269_lifebook_init_hook(struct hda_codec *codec)
AMP_IN_MUTE(0), bits);
}
-static void alc269_eeepc_dmic_automute(struct hda_codec *codec)
-{
- unsigned int present;
-
- present = snd_hda_codec_read(codec, 0x18, 0,
- AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
- snd_hda_codec_write(codec, 0x23, 0,
- AC_VERB_SET_CONNECT_SEL, (present ? 0 : 5));
-}
-
-static void alc269_eeepc_amic_automute(struct hda_codec *codec)
-{
- unsigned int present;
-
- present = snd_hda_codec_read(codec, 0x18, 0,
- AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
- snd_hda_codec_write(codec, 0x24, 0, AC_VERB_SET_AMP_GAIN_MUTE,
- 0x7000 | (0x00 << 8) | (present ? 0 : 0x80));
- snd_hda_codec_write(codec, 0x24, 0, AC_VERB_SET_AMP_GAIN_MUTE,
- 0x7000 | (0x01 << 8) | (present ? 0x80 : 0));
-}
-
/* unsolicited event for HP jack sensing */
-static void alc269_eeepc_dmic_unsol_event(struct hda_codec *codec,
+static void alc269_eeepc_unsol_event(struct hda_codec *codec,
unsigned int res)
{
- if ((res >> 26) == ALC880_HP_EVENT)
+ switch (res >> 26) {
+ case ALC880_HP_EVENT:
alc269_speaker_automute(codec);
-
- if ((res >> 26) == ALC880_MIC_EVENT)
- alc269_eeepc_dmic_automute(codec);
+ break;
+ case ALC880_MIC_EVENT:
+ alc_mic_automute(codec);
+ break;
+ }
}
-static void alc269_eeepc_dmic_inithook(struct hda_codec *codec)
+static void alc269_eeepc_dmic_setup(struct hda_codec *codec)
{
- alc269_speaker_automute(codec);
- alc269_eeepc_dmic_automute(codec);
+ struct alc_spec *spec = codec->spec;
+ spec->ext_mic.pin = 0x18;
+ spec->ext_mic.mux_idx = 0;
+ spec->int_mic.pin = 0x12;
+ spec->int_mic.mux_idx = 5;
+ spec->auto_mic = 1;
}
-/* unsolicited event for HP jack sensing */
-static void alc269_eeepc_amic_unsol_event(struct hda_codec *codec,
- unsigned int res)
+static void alc269_eeepc_amic_setup(struct hda_codec *codec)
{
- if ((res >> 26) == ALC880_HP_EVENT)
- alc269_speaker_automute(codec);
-
- if ((res >> 26) == ALC880_MIC_EVENT)
- alc269_eeepc_amic_automute(codec);
+ struct alc_spec *spec = codec->spec;
+ spec->ext_mic.pin = 0x18;
+ spec->ext_mic.mux_idx = 0;
+ spec->int_mic.pin = 0x19;
+ spec->int_mic.mux_idx = 1;
+ spec->auto_mic = 1;
}
-static void alc269_eeepc_amic_inithook(struct hda_codec *codec)
+static void alc269_eeepc_inithook(struct hda_codec *codec)
{
alc269_speaker_automute(codec);
- alc269_eeepc_amic_automute(codec);
+ alc_mic_automute(codec);
}
/*
/* set up input amps for analog loopback */
/* Amp Indices: DAC = 0, mixer = 1 */
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
-
- {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
- {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
- {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-
- {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-
- {0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
-
- /* FIXME: use matrix-type input source selection */
- /* Mixer elements: 0x18, 19, 1a, 1b, 1d, 0b */
- /* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
-
- /* set EAPD */
- {0x14, AC_VERB_SET_EAPD_BTLENABLE, 2},
- {0x15, AC_VERB_SET_EAPD_BTLENABLE, 2},
- { }
-};
-
-/* add playback controls from the parsed DAC table */
-static int alc269_auto_create_multi_out_ctls(struct alc_spec *spec,
- const struct auto_pin_cfg *cfg)
-{
- hda_nid_t nid;
- int err;
-
- spec->multiout.num_dacs = 1; /* only use one dac */
- spec->multiout.dac_nids = spec->private_dac_nids;
- spec->multiout.dac_nids[0] = 2;
-
- nid = cfg->line_out_pins[0];
- if (nid) {
- err = add_control(spec, ALC_CTL_WIDGET_VOL,
- "Front Playback Volume",
- HDA_COMPOSE_AMP_VAL(0x02, 3, 0, HDA_OUTPUT));
- if (err < 0)
- return err;
- err = add_control(spec, ALC_CTL_WIDGET_MUTE,
- "Front Playback Switch",
- HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT));
- if (err < 0)
- return err;
- }
-
- nid = cfg->speaker_pins[0];
- if (nid) {
- if (!cfg->line_out_pins[0]) {
- err = add_control(spec, ALC_CTL_WIDGET_VOL,
- "Speaker Playback Volume",
- HDA_COMPOSE_AMP_VAL(0x02, 3, 0,
- HDA_OUTPUT));
- if (err < 0)
- return err;
- }
- if (nid == 0x16) {
- err = add_control(spec, ALC_CTL_WIDGET_MUTE,
- "Speaker Playback Switch",
- HDA_COMPOSE_AMP_VAL(nid, 2, 0,
- HDA_OUTPUT));
- if (err < 0)
- return err;
- } else {
- err = add_control(spec, ALC_CTL_WIDGET_MUTE,
- "Speaker Playback Switch",
- HDA_COMPOSE_AMP_VAL(nid, 3, 0,
- HDA_OUTPUT));
- if (err < 0)
- return err;
- }
- }
- nid = cfg->hp_pins[0];
- if (nid) {
- /* spec->multiout.hp_nid = 2; */
- if (!cfg->line_out_pins[0] && !cfg->speaker_pins[0]) {
- err = add_control(spec, ALC_CTL_WIDGET_VOL,
- "Headphone Playback Volume",
- HDA_COMPOSE_AMP_VAL(0x02, 3, 0,
- HDA_OUTPUT));
- if (err < 0)
- return err;
- }
- if (nid == 0x16) {
- err = add_control(spec, ALC_CTL_WIDGET_MUTE,
- "Headphone Playback Switch",
- HDA_COMPOSE_AMP_VAL(nid, 2, 0,
- HDA_OUTPUT));
- if (err < 0)
- return err;
- } else {
- err = add_control(spec, ALC_CTL_WIDGET_MUTE,
- "Headphone Playback Switch",
- HDA_COMPOSE_AMP_VAL(nid, 3, 0,
- HDA_OUTPUT));
- if (err < 0)
- return err;
- }
- }
- return 0;
-}
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+
+ {0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
+
+ /* FIXME: use matrix-type input source selection */
+ /* Mixer elements: 0x18, 19, 1a, 1b, 1d, 0b */
+ /* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+
+ /* set EAPD */
+ {0x14, AC_VERB_SET_EAPD_BTLENABLE, 2},
+ {0x15, AC_VERB_SET_EAPD_BTLENABLE, 2},
+ { }
+};
-#define alc269_auto_create_analog_input_ctls \
- alc262_auto_create_analog_input_ctls
+#define alc269_auto_create_multi_out_ctls \
+ alc268_auto_create_multi_out_ctls
+#define alc269_auto_create_input_ctls \
+ alc268_auto_create_input_ctls
#ifdef CONFIG_SND_HDA_POWER_SAVE
#define alc269_loopbacks alc880_loopbacks
err = alc269_auto_create_multi_out_ctls(spec, &spec->autocfg);
if (err < 0)
return err;
- err = alc269_auto_create_analog_input_ctls(spec, &spec->autocfg);
+ err = alc269_auto_create_input_ctls(codec, &spec->autocfg);
if (err < 0)
return err;
return err;
if (!spec->cap_mixer && !spec->no_analog)
- set_capture_mixer(spec);
+ set_capture_mixer(codec);
alc_ssid_check(codec, 0x15, 0x1b, 0x14);
return 1;
}
-#define alc269_auto_init_multi_out alc882_auto_init_multi_out
-#define alc269_auto_init_hp_out alc882_auto_init_hp_out
+#define alc269_auto_init_multi_out alc268_auto_init_multi_out
+#define alc269_auto_init_hp_out alc268_auto_init_hp_out
#define alc269_auto_init_analog_input alc882_auto_init_analog_input
.channel_mode = alc269_modes,
.input_mux = &alc269_capture_source,
.unsol_event = alc269_quanta_fl1_unsol_event,
+ .setup = alc269_quanta_fl1_setup,
.init_hook = alc269_quanta_fl1_init_hook,
},
[ALC269_ASUS_EEEPC_P703] = {
.hp_nid = 0x03,
.num_channel_mode = ARRAY_SIZE(alc269_modes),
.channel_mode = alc269_modes,
- .input_mux = &alc269_eeepc_amic_capture_source,
- .unsol_event = alc269_eeepc_amic_unsol_event,
- .init_hook = alc269_eeepc_amic_inithook,
+ .unsol_event = alc269_eeepc_unsol_event,
+ .setup = alc269_eeepc_amic_setup,
+ .init_hook = alc269_eeepc_inithook,
},
[ALC269_ASUS_EEEPC_P901] = {
.mixers = { alc269_eeepc_mixer },
.hp_nid = 0x03,
.num_channel_mode = ARRAY_SIZE(alc269_modes),
.channel_mode = alc269_modes,
- .input_mux = &alc269_eeepc_dmic_capture_source,
- .unsol_event = alc269_eeepc_dmic_unsol_event,
- .init_hook = alc269_eeepc_dmic_inithook,
+ .unsol_event = alc269_eeepc_unsol_event,
+ .setup = alc269_eeepc_dmic_setup,
+ .init_hook = alc269_eeepc_inithook,
},
[ALC269_FUJITSU] = {
.mixers = { alc269_fujitsu_mixer },
.hp_nid = 0x03,
.num_channel_mode = ARRAY_SIZE(alc269_modes),
.channel_mode = alc269_modes,
- .input_mux = &alc269_eeepc_dmic_capture_source,
- .unsol_event = alc269_eeepc_dmic_unsol_event,
- .init_hook = alc269_eeepc_dmic_inithook,
+ .unsol_event = alc269_eeepc_unsol_event,
+ .setup = alc269_eeepc_dmic_setup,
+ .init_hook = alc269_eeepc_inithook,
},
[ALC269_LIFEBOOK] = {
.mixers = { alc269_lifebook_mixer },
alc269_cfg_tbl);
if (board_config < 0) {
- printk(KERN_INFO "hda_codec: Unknown model for %s, "
- "trying auto-probe from BIOS...\n", codec->chip_name);
+ printk(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
+ codec->chip_name);
board_config = ALC269_AUTO;
}
}
if (board_config != ALC269_AUTO)
- setup_preset(spec, &alc269_presets[board_config]);
+ setup_preset(codec, &alc269_presets[board_config]);
if (codec->subsystem_id == 0x17aa3bf8) {
/* Due to a hardware problem on Lenovo Ideadpad, we need to
spec->num_adc_nids = ARRAY_SIZE(alc269_adc_nids);
spec->capsrc_nids = alc269_capsrc_nids;
if (!spec->cap_mixer)
- set_capture_mixer(spec);
+ set_capture_mixer(codec);
set_beep_amp(spec, 0x0b, 0x04, HDA_INPUT);
+ spec->vmaster_nid = 0x02;
+
codec->patch_ops = alc_patch_ops;
if (board_config == ALC269_AUTO)
spec->init_hook = alc269_auto_init;
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c},
- {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
- {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
- {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
+ {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
{0x08, AC_VERB_SET_CONNECT_SEL, 0x00}, /* set Mic 1 */
},
};
+static hda_nid_t alc861_look_for_dac(struct hda_codec *codec, hda_nid_t pin)
+{
+ struct alc_spec *spec = codec->spec;
+ hda_nid_t mix, srcs[5];
+ int i, j, num;
+
+ if (snd_hda_get_connections(codec, pin, &mix, 1) != 1)
+ return 0;
+ num = snd_hda_get_connections(codec, mix, srcs, ARRAY_SIZE(srcs));
+ if (num < 0)
+ return 0;
+ for (i = 0; i < num; i++) {
+ unsigned int type;
+ type = get_wcaps_type(get_wcaps(codec, srcs[i]));
+ if (type != AC_WID_AUD_OUT)
+ continue;
+ for (j = 0; j < spec->multiout.num_dacs; j++)
+ if (spec->multiout.dac_nids[j] == srcs[i])
+ break;
+ if (j >= spec->multiout.num_dacs)
+ return srcs[i];
+ }
+ return 0;
+}
+
/* fill in the dac_nids table from the parsed pin configuration */
-static int alc861_auto_fill_dac_nids(struct alc_spec *spec,
+static int alc861_auto_fill_dac_nids(struct hda_codec *codec,
const struct auto_pin_cfg *cfg)
{
+ struct alc_spec *spec = codec->spec;
int i;
- hda_nid_t nid;
+ hda_nid_t nid, dac;
spec->multiout.dac_nids = spec->private_dac_nids;
for (i = 0; i < cfg->line_outs; i++) {
nid = cfg->line_out_pins[i];
- if (nid) {
- if (i >= ARRAY_SIZE(alc861_dac_nids))
- continue;
- spec->multiout.dac_nids[i] = alc861_dac_nids[i];
- }
+ dac = alc861_look_for_dac(codec, nid);
+ if (!dac)
+ continue;
+ spec->multiout.dac_nids[spec->multiout.num_dacs++] = dac;
}
- spec->multiout.num_dacs = cfg->line_outs;
return 0;
}
+static int alc861_create_out_sw(struct hda_codec *codec, const char *pfx,
+ hda_nid_t nid, unsigned int chs)
+{
+ char name[32];
+ snprintf(name, sizeof(name), "%s Playback Switch", pfx);
+ return add_control(codec->spec, ALC_CTL_WIDGET_MUTE, name,
+ HDA_COMPOSE_AMP_VAL(nid, chs, 0, HDA_OUTPUT));
+}
+
/* add playback controls from the parsed DAC table */
-static int alc861_auto_create_multi_out_ctls(struct alc_spec *spec,
+static int alc861_auto_create_multi_out_ctls(struct hda_codec *codec,
const struct auto_pin_cfg *cfg)
{
- char name[32];
+ struct alc_spec *spec = codec->spec;
static const char *chname[4] = {
"Front", "Surround", NULL /*CLFE*/, "Side"
};
hda_nid_t nid;
- int i, idx, err;
+ int i, err;
+
+ if (cfg->line_outs == 1) {
+ const char *pfx = NULL;
+ if (!cfg->hp_outs)
+ pfx = "Master";
+ else if (cfg->line_out_type == AUTO_PIN_SPEAKER_OUT)
+ pfx = "Speaker";
+ if (pfx) {
+ nid = spec->multiout.dac_nids[0];
+ return alc861_create_out_sw(codec, pfx, nid, 3);
+ }
+ }
for (i = 0; i < cfg->line_outs; i++) {
nid = spec->multiout.dac_nids[i];
if (!nid)
continue;
- if (nid == 0x05) {
+ if (i == 2) {
/* Center/LFE */
- err = add_control(spec, ALC_CTL_BIND_MUTE,
- "Center Playback Switch",
- HDA_COMPOSE_AMP_VAL(nid, 1, 0,
- HDA_OUTPUT));
+ err = alc861_create_out_sw(codec, "Center", nid, 1);
if (err < 0)
return err;
- err = add_control(spec, ALC_CTL_BIND_MUTE,
- "LFE Playback Switch",
- HDA_COMPOSE_AMP_VAL(nid, 2, 0,
- HDA_OUTPUT));
+ err = alc861_create_out_sw(codec, "LFE", nid, 2);
if (err < 0)
return err;
} else {
- for (idx = 0; idx < ARRAY_SIZE(alc861_dac_nids) - 1;
- idx++)
- if (nid == alc861_dac_nids[idx])
- break;
- sprintf(name, "%s Playback Switch", chname[idx]);
- err = add_control(spec, ALC_CTL_BIND_MUTE, name,
- HDA_COMPOSE_AMP_VAL(nid, 3, 0,
- HDA_OUTPUT));
+ err = alc861_create_out_sw(codec, chname[i], nid, 3);
if (err < 0)
return err;
}
return 0;
}
-static int alc861_auto_create_hp_ctls(struct alc_spec *spec, hda_nid_t pin)
+static int alc861_auto_create_hp_ctls(struct hda_codec *codec, hda_nid_t pin)
{
+ struct alc_spec *spec = codec->spec;
int err;
hda_nid_t nid;
return 0;
if ((pin >= 0x0b && pin <= 0x10) || pin == 0x1f || pin == 0x20) {
- nid = 0x03;
- err = add_control(spec, ALC_CTL_WIDGET_MUTE,
- "Headphone Playback Switch",
- HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT));
- if (err < 0)
- return err;
- spec->multiout.hp_nid = nid;
+ nid = alc861_look_for_dac(codec, pin);
+ if (nid) {
+ err = alc861_create_out_sw(codec, "Headphone", nid, 3);
+ if (err < 0)
+ return err;
+ spec->multiout.hp_nid = nid;
+ }
}
return 0;
}
/* create playback/capture controls for input pins */
-static int alc861_auto_create_analog_input_ctls(struct alc_spec *spec,
+static int alc861_auto_create_input_ctls(struct hda_codec *codec,
const struct auto_pin_cfg *cfg)
{
- struct hda_input_mux *imux = &spec->private_imux[0];
- int i, err, idx, idx1;
-
- for (i = 0; i < AUTO_PIN_LAST; i++) {
- switch (cfg->input_pins[i]) {
- case 0x0c:
- idx1 = 1;
- idx = 2; /* Line In */
- break;
- case 0x0f:
- idx1 = 2;
- idx = 2; /* Line In */
- break;
- case 0x0d:
- idx1 = 0;
- idx = 1; /* Mic In */
- break;
- case 0x10:
- idx1 = 3;
- idx = 1; /* Mic In */
- break;
- case 0x11:
- idx1 = 4;
- idx = 0; /* CD */
- break;
- default:
- continue;
- }
-
- err = new_analog_input(spec, cfg->input_pins[i],
- auto_pin_cfg_labels[i], idx, 0x15);
- if (err < 0)
- return err;
-
- imux->items[imux->num_items].label = auto_pin_cfg_labels[i];
- imux->items[imux->num_items].index = idx1;
- imux->num_items++;
- }
- return 0;
+ return alc_auto_create_input_ctls(codec, cfg, 0x15, 0x08, 0);
}
static void alc861_auto_set_output_and_unmute(struct hda_codec *codec,
hda_nid_t nid,
- int pin_type, int dac_idx)
+ int pin_type, hda_nid_t dac)
{
+ hda_nid_t mix, srcs[5];
+ int i, num;
+
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
pin_type);
- snd_hda_codec_write(codec, dac_idx, 0, AC_VERB_SET_AMP_GAIN_MUTE,
+ snd_hda_codec_write(codec, dac, 0, AC_VERB_SET_AMP_GAIN_MUTE,
AMP_OUT_UNMUTE);
+ if (snd_hda_get_connections(codec, nid, &mix, 1) != 1)
+ return;
+ num = snd_hda_get_connections(codec, mix, srcs, ARRAY_SIZE(srcs));
+ if (num < 0)
+ return;
+ for (i = 0; i < num; i++) {
+ unsigned int mute;
+ if (srcs[i] == dac || srcs[i] == 0x15)
+ mute = AMP_IN_UNMUTE(i);
+ else
+ mute = AMP_IN_MUTE(i);
+ snd_hda_codec_write(codec, mix, 0, AC_VERB_SET_AMP_GAIN_MUTE,
+ mute);
+ }
}
static void alc861_auto_init_multi_out(struct hda_codec *codec)
hda_nid_t pin;
pin = spec->autocfg.hp_pins[0];
- if (pin) /* connect to front */
+ if (pin)
alc861_auto_set_output_and_unmute(codec, pin, PIN_HP,
- spec->multiout.dac_nids[0]);
+ spec->multiout.hp_nid);
pin = spec->autocfg.speaker_pins[0];
if (pin)
- alc861_auto_set_output_and_unmute(codec, pin, PIN_OUT, 0);
+ alc861_auto_set_output_and_unmute(codec, pin, PIN_OUT,
+ spec->multiout.dac_nids[0]);
}
static void alc861_auto_init_analog_input(struct hda_codec *codec)
if (!spec->autocfg.line_outs)
return 0; /* can't find valid BIOS pin config */
- err = alc861_auto_fill_dac_nids(spec, &spec->autocfg);
+ err = alc861_auto_fill_dac_nids(codec, &spec->autocfg);
if (err < 0)
return err;
- err = alc861_auto_create_multi_out_ctls(spec, &spec->autocfg);
+ err = alc861_auto_create_multi_out_ctls(codec, &spec->autocfg);
if (err < 0)
return err;
- err = alc861_auto_create_hp_ctls(spec, spec->autocfg.hp_pins[0]);
+ err = alc861_auto_create_hp_ctls(codec, spec->autocfg.hp_pins[0]);
if (err < 0)
return err;
- err = alc861_auto_create_analog_input_ctls(spec, &spec->autocfg);
+ err = alc861_auto_create_input_ctls(codec, &spec->autocfg);
if (err < 0)
return err;
spec->adc_nids = alc861_adc_nids;
spec->num_adc_nids = ARRAY_SIZE(alc861_adc_nids);
- set_capture_mixer(spec);
+ set_capture_mixer(codec);
alc_ssid_check(codec, 0x0e, 0x0f, 0x0b);
alc861_cfg_tbl);
if (board_config < 0) {
- printk(KERN_INFO "hda_codec: Unknown model for %s, "
- "trying auto-probe from BIOS...\n", codec->chip_name);
+ printk(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
+ codec->chip_name);
board_config = ALC861_AUTO;
}
}
if (board_config != ALC861_AUTO)
- setup_preset(spec, &alc861_presets[board_config]);
+ setup_preset(codec, &alc861_presets[board_config]);
spec->stream_analog_playback = &alc861_pcm_analog_playback;
spec->stream_analog_capture = &alc861_pcm_analog_capture;
HDA_AMP_MUTE, bits);
}
-static void alc861vd_lenovo_init_hook(struct hda_codec *codec)
+static void alc861vd_lenovo_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
-
spec->autocfg.hp_pins[0] = 0x1b;
spec->autocfg.speaker_pins[0] = 0x14;
+}
+
+static void alc861vd_lenovo_init_hook(struct hda_codec *codec)
+{
alc_automute_amp(codec);
alc861vd_lenovo_mic_automute(codec);
}
};
/* toggle speaker-output according to the hp-jack state */
-static void alc861vd_dallas_init_hook(struct hda_codec *codec)
+static void alc861vd_dallas_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x15;
spec->autocfg.speaker_pins[0] = 0x14;
- alc_automute_amp(codec);
}
#ifdef CONFIG_SND_HDA_POWER_SAVE
SND_PCI_QUIRK(0x10de, 0x03f0, "Realtek ALC660 demo", ALC660VD_3ST),
SND_PCI_QUIRK(0x1179, 0xff00, "Toshiba A135", ALC861VD_LENOVO),
/*SND_PCI_QUIRK(0x1179, 0xff00, "DALLAS", ALC861VD_DALLAS),*/ /*lenovo*/
- SND_PCI_QUIRK(0x1179, 0xff01, "DALLAS", ALC861VD_DALLAS),
+ SND_PCI_QUIRK(0x1179, 0xff01, "Toshiba A135", ALC861VD_LENOVO),
SND_PCI_QUIRK(0x1179, 0xff03, "Toshiba P205", ALC861VD_LENOVO),
SND_PCI_QUIRK(0x1179, 0xff31, "Toshiba L30-149", ALC861VD_DALLAS),
SND_PCI_QUIRK(0x1565, 0x820d, "Biostar NF61S SE", ALC861VD_6ST_DIG),
.channel_mode = alc861vd_3stack_2ch_modes,
.input_mux = &alc861vd_capture_source,
.unsol_event = alc861vd_lenovo_unsol_event,
+ .setup = alc861vd_lenovo_setup,
.init_hook = alc861vd_lenovo_init_hook,
},
[ALC861VD_DALLAS] = {
.channel_mode = alc861vd_3stack_2ch_modes,
.input_mux = &alc861vd_dallas_capture_source,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc861vd_dallas_init_hook,
+ .setup = alc861vd_dallas_setup,
+ .init_hook = alc_automute_amp,
},
[ALC861VD_HP] = {
.mixers = { alc861vd_hp_mixer },
.channel_mode = alc861vd_3stack_2ch_modes,
.input_mux = &alc861vd_hp_capture_source,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc861vd_dallas_init_hook,
+ .setup = alc861vd_dallas_setup,
+ .init_hook = alc_automute_amp,
},
[ALC660VD_ASUS_V1S] = {
.mixers = { alc861vd_lenovo_mixer },
.channel_mode = alc861vd_3stack_2ch_modes,
.input_mux = &alc861vd_capture_source,
.unsol_event = alc861vd_lenovo_unsol_event,
+ .setup = alc861vd_lenovo_setup,
.init_hook = alc861vd_lenovo_init_hook,
},
};
/*
* BIOS auto configuration
*/
+static int alc861vd_auto_create_input_ctls(struct hda_codec *codec,
+ const struct auto_pin_cfg *cfg)
+{
+ return alc_auto_create_input_ctls(codec, cfg, 0x15, 0x09, 0);
+}
+
+
static void alc861vd_auto_set_output_and_unmute(struct hda_codec *codec,
hda_nid_t nid, int pin_type, int dac_idx)
{
alc861vd_auto_set_output_and_unmute(codec, pin, PIN_OUT, 0);
}
-#define alc861vd_is_input_pin(nid) alc880_is_input_pin(nid)
#define ALC861VD_PIN_CD_NID ALC880_PIN_CD_NID
static void alc861vd_auto_init_analog_input(struct hda_codec *codec)
for (i = 0; i < AUTO_PIN_LAST; i++) {
hda_nid_t nid = spec->autocfg.input_pins[i];
- if (alc861vd_is_input_pin(nid)) {
+ if (alc_is_input_pin(codec, nid)) {
alc_set_input_pin(codec, nid, i);
if (nid != ALC861VD_PIN_CD_NID &&
(get_wcaps(codec, nid) & AC_WCAP_OUT_AMP))
if (err < 0)
return err;
} else {
- sprintf(name, "%s Playback Volume", chname[i]);
+ const char *pfx;
+ if (cfg->line_outs == 1 &&
+ cfg->line_out_type == AUTO_PIN_SPEAKER_OUT) {
+ if (!cfg->hp_pins)
+ pfx = "Speaker";
+ else
+ pfx = "PCM";
+ } else
+ pfx = chname[i];
+ sprintf(name, "%s Playback Volume", pfx);
err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
HDA_COMPOSE_AMP_VAL(nid_v, 3, 0,
HDA_OUTPUT));
if (err < 0)
return err;
- sprintf(name, "%s Playback Switch", chname[i]);
+ if (cfg->line_outs == 1 &&
+ cfg->line_out_type == AUTO_PIN_SPEAKER_OUT)
+ pfx = "Speaker";
+ sprintf(name, "%s Playback Switch", pfx);
err = add_control(spec, ALC_CTL_BIND_MUTE, name,
HDA_COMPOSE_AMP_VAL(nid_s, 3, 2,
HDA_INPUT));
"Headphone");
if (err < 0)
return err;
- err = alc880_auto_create_analog_input_ctls(spec, &spec->autocfg);
+ err = alc861vd_auto_create_input_ctls(codec, &spec->autocfg);
if (err < 0)
return err;
alc861vd_cfg_tbl);
if (board_config < 0 || board_config >= ALC861VD_MODEL_LAST) {
- printk(KERN_INFO "hda_codec: Unknown model for %s, "
- "trying auto-probe from BIOS...\n", codec->chip_name);
+ printk(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
+ codec->chip_name);
board_config = ALC861VD_AUTO;
}
}
if (board_config != ALC861VD_AUTO)
- setup_preset(spec, &alc861vd_presets[board_config]);
+ setup_preset(codec, &alc861vd_presets[board_config]);
if (codec->vendor_id == 0x10ec0660) {
/* always turn on EAPD */
spec->stream_digital_playback = &alc861vd_pcm_digital_playback;
spec->stream_digital_capture = &alc861vd_pcm_digital_capture;
- spec->adc_nids = alc861vd_adc_nids;
- spec->num_adc_nids = ARRAY_SIZE(alc861vd_adc_nids);
- spec->capsrc_nids = alc861vd_capsrc_nids;
+ if (!spec->adc_nids) {
+ spec->adc_nids = alc861vd_adc_nids;
+ spec->num_adc_nids = ARRAY_SIZE(alc861vd_adc_nids);
+ }
+ if (!spec->capsrc_nids)
+ spec->capsrc_nids = alc861vd_capsrc_nids;
- set_capture_mixer(spec);
+ set_capture_mixer(codec);
set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
spec->vmaster_nid = 0x02;
0x02, 0x03
};
-static hda_nid_t alc662_adc_nids[1] = {
+static hda_nid_t alc662_adc_nids[2] = {
/* ADC1-2 */
- 0x09,
+ 0x09, 0x08
};
static hda_nid_t alc272_adc_nids[1] = {
0x08,
};
-static hda_nid_t alc662_capsrc_nids[1] = { 0x22 };
+static hda_nid_t alc662_capsrc_nids[2] = { 0x22, 0x23 };
static hda_nid_t alc272_capsrc_nids[1] = { 0x23 };
},
};
-static struct hda_input_mux alc662_eeepc_capture_source = {
- .num_items = 2,
- .items = {
- { "i-Mic", 0x1 },
- { "e-Mic", 0x0 },
- },
-};
-
static struct hda_input_mux alc663_capture_source = {
.num_items = 3,
.items = {
},
};
-static struct hda_input_mux alc663_m51va_capture_source = {
- .num_items = 2,
- .items = {
- { "Ext-Mic", 0x0 },
- { "D-Mic", 0x9 },
- },
-};
-
-#if 1 /* set to 0 for testing other input sources below */
-static struct hda_input_mux alc272_nc10_capture_source = {
- .num_items = 2,
- .items = {
- { "Autoselect Mic", 0x0 },
- { "Internal Mic", 0x1 },
- },
-};
-#else
+#if 0 /* set to 1 for testing other input sources below */
static struct hda_input_mux alc272_nc10_capture_source = {
.num_items = 16,
.items = {
alc662_lenovo_101e_ispeaker_automute(codec);
}
-static void alc662_eeepc_mic_automute(struct hda_codec *codec)
-{
- unsigned int present;
-
- present = snd_hda_codec_read(codec, 0x18, 0,
- AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
- snd_hda_codec_write(codec, 0x22, 0, AC_VERB_SET_AMP_GAIN_MUTE,
- 0x7000 | (0x00 << 8) | (present ? 0 : 0x80));
- snd_hda_codec_write(codec, 0x23, 0, AC_VERB_SET_AMP_GAIN_MUTE,
- 0x7000 | (0x00 << 8) | (present ? 0 : 0x80));
- snd_hda_codec_write(codec, 0x22, 0, AC_VERB_SET_AMP_GAIN_MUTE,
- 0x7000 | (0x01 << 8) | (present ? 0x80 : 0));
- snd_hda_codec_write(codec, 0x23, 0, AC_VERB_SET_AMP_GAIN_MUTE,
- 0x7000 | (0x01 << 8) | (present ? 0x80 : 0));
-}
-
/* unsolicited event for HP jack sensing */
static void alc662_eeepc_unsol_event(struct hda_codec *codec,
unsigned int res)
{
if ((res >> 26) == ALC880_MIC_EVENT)
- alc662_eeepc_mic_automute(codec);
+ alc_mic_automute(codec);
else
alc262_hippo_unsol_event(codec, res);
}
+static void alc662_eeepc_setup(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+
+ alc262_hippo1_setup(codec);
+ spec->ext_mic.pin = 0x18;
+ spec->ext_mic.mux_idx = 0;
+ spec->int_mic.pin = 0x19;
+ spec->int_mic.mux_idx = 1;
+ spec->auto_mic = 1;
+}
+
static void alc662_eeepc_inithook(struct hda_codec *codec)
{
- alc262_hippo1_init_hook(codec);
- alc662_eeepc_mic_automute(codec);
+ alc262_hippo_automute(codec);
+ alc_mic_automute(codec);
}
-static void alc662_eeepc_ep20_inithook(struct hda_codec *codec)
+static void alc662_eeepc_ep20_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x14;
spec->autocfg.speaker_pins[0] = 0x1b;
- alc262_hippo_master_update(codec);
}
+#define alc662_eeepc_ep20_inithook alc262_hippo_master_update
+
static void alc663_m51va_speaker_automute(struct hda_codec *codec)
{
unsigned int present;
}
}
-static void alc663_m51va_mic_automute(struct hda_codec *codec)
-{
- unsigned int present;
-
- present = snd_hda_codec_read(codec, 0x18, 0,
- AC_VERB_GET_PIN_SENSE, 0)
- & AC_PINSENSE_PRESENCE;
- snd_hda_codec_write_cache(codec, 0x22, 0, AC_VERB_SET_AMP_GAIN_MUTE,
- 0x7000 | (0x00 << 8) | (present ? 0 : 0x80));
- snd_hda_codec_write_cache(codec, 0x23, 0, AC_VERB_SET_AMP_GAIN_MUTE,
- 0x7000 | (0x00 << 8) | (present ? 0 : 0x80));
- snd_hda_codec_write_cache(codec, 0x22, 0, AC_VERB_SET_AMP_GAIN_MUTE,
- 0x7000 | (0x09 << 8) | (present ? 0x80 : 0));
- snd_hda_codec_write_cache(codec, 0x23, 0, AC_VERB_SET_AMP_GAIN_MUTE,
- 0x7000 | (0x09 << 8) | (present ? 0x80 : 0));
-}
-
static void alc663_m51va_unsol_event(struct hda_codec *codec,
unsigned int res)
{
alc663_m51va_speaker_automute(codec);
break;
case ALC880_MIC_EVENT:
- alc663_m51va_mic_automute(codec);
+ alc_mic_automute(codec);
break;
}
}
+static void alc663_m51va_setup(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ spec->ext_mic.pin = 0x18;
+ spec->ext_mic.mux_idx = 0;
+ spec->int_mic.pin = 0x12;
+ spec->int_mic.mux_idx = 1;
+ spec->auto_mic = 1;
+}
+
static void alc663_m51va_inithook(struct hda_codec *codec)
{
alc663_m51va_speaker_automute(codec);
- alc663_m51va_mic_automute(codec);
+ alc_mic_automute(codec);
}
/* ***************** Mode1 ******************************/
-static void alc663_mode1_unsol_event(struct hda_codec *codec,
- unsigned int res)
-{
- switch (res >> 26) {
- case ALC880_HP_EVENT:
- alc663_m51va_speaker_automute(codec);
- break;
- case ALC880_MIC_EVENT:
- alc662_eeepc_mic_automute(codec);
- break;
- }
-}
+#define alc663_mode1_unsol_event alc663_m51va_unsol_event
+#define alc663_mode1_setup alc663_m51va_setup
+#define alc663_mode1_inithook alc663_m51va_inithook
-static void alc663_mode1_inithook(struct hda_codec *codec)
-{
- alc663_m51va_speaker_automute(codec);
- alc662_eeepc_mic_automute(codec);
-}
/* ***************** Mode2 ******************************/
static void alc662_mode2_unsol_event(struct hda_codec *codec,
unsigned int res)
alc662_f5z_speaker_automute(codec);
break;
case ALC880_MIC_EVENT:
- alc662_eeepc_mic_automute(codec);
+ alc_mic_automute(codec);
break;
}
}
+#define alc662_mode2_setup alc663_m51va_setup
+
static void alc662_mode2_inithook(struct hda_codec *codec)
{
alc662_f5z_speaker_automute(codec);
- alc662_eeepc_mic_automute(codec);
+ alc_mic_automute(codec);
}
/* ***************** Mode3 ******************************/
static void alc663_mode3_unsol_event(struct hda_codec *codec,
alc663_two_hp_m1_speaker_automute(codec);
break;
case ALC880_MIC_EVENT:
- alc662_eeepc_mic_automute(codec);
+ alc_mic_automute(codec);
break;
}
}
+#define alc663_mode3_setup alc663_m51va_setup
+
static void alc663_mode3_inithook(struct hda_codec *codec)
{
alc663_two_hp_m1_speaker_automute(codec);
- alc662_eeepc_mic_automute(codec);
+ alc_mic_automute(codec);
}
/* ***************** Mode4 ******************************/
static void alc663_mode4_unsol_event(struct hda_codec *codec,
alc663_21jd_two_speaker_automute(codec);
break;
case ALC880_MIC_EVENT:
- alc662_eeepc_mic_automute(codec);
+ alc_mic_automute(codec);
break;
}
}
+#define alc663_mode4_setup alc663_m51va_setup
+
static void alc663_mode4_inithook(struct hda_codec *codec)
{
alc663_21jd_two_speaker_automute(codec);
- alc662_eeepc_mic_automute(codec);
+ alc_mic_automute(codec);
}
/* ***************** Mode5 ******************************/
static void alc663_mode5_unsol_event(struct hda_codec *codec,
alc663_15jd_two_speaker_automute(codec);
break;
case ALC880_MIC_EVENT:
- alc662_eeepc_mic_automute(codec);
+ alc_mic_automute(codec);
break;
}
}
+#define alc663_mode5_setup alc663_m51va_setup
+
static void alc663_mode5_inithook(struct hda_codec *codec)
{
alc663_15jd_two_speaker_automute(codec);
- alc662_eeepc_mic_automute(codec);
+ alc_mic_automute(codec);
}
/* ***************** Mode6 ******************************/
static void alc663_mode6_unsol_event(struct hda_codec *codec,
alc663_two_hp_m2_speaker_automute(codec);
break;
case ALC880_MIC_EVENT:
- alc662_eeepc_mic_automute(codec);
+ alc_mic_automute(codec);
break;
}
}
+#define alc663_mode6_setup alc663_m51va_setup
+
static void alc663_mode6_inithook(struct hda_codec *codec)
{
alc663_two_hp_m2_speaker_automute(codec);
- alc662_eeepc_mic_automute(codec);
+ alc_mic_automute(codec);
}
static void alc663_g71v_hp_automute(struct hda_codec *codec)
alc663_g71v_front_automute(codec);
break;
case ALC880_MIC_EVENT:
- alc662_eeepc_mic_automute(codec);
+ alc_mic_automute(codec);
break;
}
}
+#define alc663_g71v_setup alc663_m51va_setup
+
static void alc663_g71v_inithook(struct hda_codec *codec)
{
alc663_g71v_front_automute(codec);
alc663_g71v_hp_automute(codec);
- alc662_eeepc_mic_automute(codec);
+ alc_mic_automute(codec);
}
static void alc663_g50v_unsol_event(struct hda_codec *codec,
alc663_m51va_speaker_automute(codec);
break;
case ALC880_MIC_EVENT:
- alc662_eeepc_mic_automute(codec);
+ alc_mic_automute(codec);
break;
}
}
+#define alc663_g50v_setup alc663_m51va_setup
+
static void alc663_g50v_inithook(struct hda_codec *codec)
{
alc663_m51va_speaker_automute(codec);
- alc662_eeepc_mic_automute(codec);
+ alc_mic_automute(codec);
}
static struct snd_kcontrol_new alc662_ecs_mixer[] = {
.dac_nids = alc662_dac_nids,
.num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
.channel_mode = alc662_3ST_2ch_modes,
- .input_mux = &alc662_eeepc_capture_source,
.unsol_event = alc662_eeepc_unsol_event,
+ .setup = alc662_eeepc_setup,
.init_hook = alc662_eeepc_inithook,
},
[ALC662_ASUS_EEEPC_EP20] = {
.channel_mode = alc662_3ST_6ch_modes,
.input_mux = &alc662_lenovo_101e_capture_source,
.unsol_event = alc662_eeepc_unsol_event,
+ .setup = alc662_eeepc_ep20_setup,
.init_hook = alc662_eeepc_ep20_inithook,
},
[ALC662_ECS] = {
.dac_nids = alc662_dac_nids,
.num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
.channel_mode = alc662_3ST_2ch_modes,
- .input_mux = &alc662_eeepc_capture_source,
.unsol_event = alc662_eeepc_unsol_event,
+ .setup = alc662_eeepc_setup,
.init_hook = alc662_eeepc_inithook,
},
[ALC663_ASUS_M51VA] = {
.dig_out_nid = ALC662_DIGOUT_NID,
.num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
.channel_mode = alc662_3ST_2ch_modes,
- .input_mux = &alc663_m51va_capture_source,
.unsol_event = alc663_m51va_unsol_event,
+ .setup = alc663_m51va_setup,
.init_hook = alc663_m51va_inithook,
},
[ALC663_ASUS_G71V] = {
.dig_out_nid = ALC662_DIGOUT_NID,
.num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
.channel_mode = alc662_3ST_2ch_modes,
- .input_mux = &alc662_eeepc_capture_source,
.unsol_event = alc663_g71v_unsol_event,
+ .setup = alc663_g71v_setup,
.init_hook = alc663_g71v_inithook,
},
[ALC663_ASUS_H13] = {
.dac_nids = alc662_dac_nids,
.num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
.channel_mode = alc662_3ST_2ch_modes,
- .input_mux = &alc663_m51va_capture_source,
.unsol_event = alc663_m51va_unsol_event,
.init_hook = alc663_m51va_inithook,
},
.channel_mode = alc662_3ST_6ch_modes,
.input_mux = &alc663_capture_source,
.unsol_event = alc663_g50v_unsol_event,
+ .setup = alc663_g50v_setup,
.init_hook = alc663_g50v_inithook,
},
[ALC663_ASUS_MODE1] = {
.dig_out_nid = ALC662_DIGOUT_NID,
.num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
.channel_mode = alc662_3ST_2ch_modes,
- .input_mux = &alc662_eeepc_capture_source,
.unsol_event = alc663_mode1_unsol_event,
+ .setup = alc663_mode1_setup,
.init_hook = alc663_mode1_inithook,
},
[ALC662_ASUS_MODE2] = {
.dig_out_nid = ALC662_DIGOUT_NID,
.num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
.channel_mode = alc662_3ST_2ch_modes,
- .input_mux = &alc662_eeepc_capture_source,
.unsol_event = alc662_mode2_unsol_event,
+ .setup = alc662_mode2_setup,
.init_hook = alc662_mode2_inithook,
},
[ALC663_ASUS_MODE3] = {
.dig_out_nid = ALC662_DIGOUT_NID,
.num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
.channel_mode = alc662_3ST_2ch_modes,
- .input_mux = &alc662_eeepc_capture_source,
.unsol_event = alc663_mode3_unsol_event,
+ .setup = alc663_mode3_setup,
.init_hook = alc663_mode3_inithook,
},
[ALC663_ASUS_MODE4] = {
.dig_out_nid = ALC662_DIGOUT_NID,
.num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
.channel_mode = alc662_3ST_2ch_modes,
- .input_mux = &alc662_eeepc_capture_source,
.unsol_event = alc663_mode4_unsol_event,
+ .setup = alc663_mode4_setup,
.init_hook = alc663_mode4_inithook,
},
[ALC663_ASUS_MODE5] = {
.dig_out_nid = ALC662_DIGOUT_NID,
.num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
.channel_mode = alc662_3ST_2ch_modes,
- .input_mux = &alc662_eeepc_capture_source,
.unsol_event = alc663_mode5_unsol_event,
+ .setup = alc663_mode5_setup,
.init_hook = alc663_mode5_inithook,
},
[ALC663_ASUS_MODE6] = {
.dig_out_nid = ALC662_DIGOUT_NID,
.num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
.channel_mode = alc662_3ST_2ch_modes,
- .input_mux = &alc662_eeepc_capture_source,
.unsol_event = alc663_mode6_unsol_event,
+ .setup = alc663_mode6_setup,
.init_hook = alc663_mode6_inithook,
},
[ALC272_DELL] = {
.num_adc_nids = ARRAY_SIZE(alc272_adc_nids),
.capsrc_nids = alc272_capsrc_nids,
.channel_mode = alc662_3ST_2ch_modes,
- .input_mux = &alc663_m51va_capture_source,
.unsol_event = alc663_m51va_unsol_event,
+ .setup = alc663_m51va_setup,
.init_hook = alc663_m51va_inithook,
},
[ALC272_DELL_ZM1] = {
.dac_nids = alc662_dac_nids,
.num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
.adc_nids = alc662_adc_nids,
- .num_adc_nids = ARRAY_SIZE(alc662_adc_nids),
+ .num_adc_nids = 1,
.capsrc_nids = alc662_capsrc_nids,
.channel_mode = alc662_3ST_2ch_modes,
- .input_mux = &alc663_m51va_capture_source,
.unsol_event = alc663_m51va_unsol_event,
+ .setup = alc663_m51va_setup,
.init_hook = alc663_m51va_inithook,
},
[ALC272_SAMSUNG_NC10] = {
.dac_nids = alc272_dac_nids,
.num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
.channel_mode = alc662_3ST_2ch_modes,
- .input_mux = &alc272_nc10_capture_source,
+ /*.input_mux = &alc272_nc10_capture_source,*/
.unsol_event = alc663_mode4_unsol_event,
+ .setup = alc663_mode4_setup,
.init_hook = alc663_mode4_inithook,
},
};
if (err < 0)
return err;
} else {
- sprintf(name, "%s Playback Volume", chname[i]);
+ const char *pfx;
+ if (cfg->line_outs == 1 &&
+ cfg->line_out_type == AUTO_PIN_SPEAKER_OUT) {
+ if (!cfg->hp_pins)
+ pfx = "Speaker";
+ else
+ pfx = "PCM";
+ } else
+ pfx = chname[i];
+ sprintf(name, "%s Playback Volume", pfx);
err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
HDA_COMPOSE_AMP_VAL(nid, 3, 0,
HDA_OUTPUT));
if (err < 0)
return err;
- sprintf(name, "%s Playback Switch", chname[i]);
+ if (cfg->line_outs == 1 &&
+ cfg->line_out_type == AUTO_PIN_SPEAKER_OUT)
+ pfx = "Speaker";
+ sprintf(name, "%s Playback Switch", pfx);
err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
HDA_COMPOSE_AMP_VAL(alc880_idx_to_mixer(i),
3, 0, HDA_INPUT));
return 0;
}
-/* return the index of the src widget from the connection list of the nid.
- * return -1 if not found
- */
-static int alc662_input_pin_idx(struct hda_codec *codec, hda_nid_t nid,
- hda_nid_t src)
-{
- hda_nid_t conn_list[HDA_MAX_CONNECTIONS];
- int i, conns;
-
- conns = snd_hda_get_connections(codec, nid, conn_list,
- ARRAY_SIZE(conn_list));
- if (conns < 0)
- return -1;
- for (i = 0; i < conns; i++)
- if (conn_list[i] == src)
- return i;
- return -1;
-}
-
-static int alc662_is_input_pin(struct hda_codec *codec, hda_nid_t nid)
-{
- unsigned int pincap = snd_hda_query_pin_caps(codec, nid);
- return (pincap & AC_PINCAP_IN) != 0;
-}
-
/* create playback/capture controls for input pins */
-static int alc662_auto_create_analog_input_ctls(struct hda_codec *codec,
- const struct auto_pin_cfg *cfg)
-{
- struct alc_spec *spec = codec->spec;
- struct hda_input_mux *imux = &spec->private_imux[0];
- int i, err, idx;
-
- for (i = 0; i < AUTO_PIN_LAST; i++) {
- if (alc662_is_input_pin(codec, cfg->input_pins[i])) {
- idx = alc662_input_pin_idx(codec, 0x0b,
- cfg->input_pins[i]);
- if (idx >= 0) {
- err = new_analog_input(spec, cfg->input_pins[i],
- auto_pin_cfg_labels[i],
- idx, 0x0b);
- if (err < 0)
- return err;
- }
- idx = alc662_input_pin_idx(codec, 0x22,
- cfg->input_pins[i]);
- if (idx >= 0) {
- imux->items[imux->num_items].label =
- auto_pin_cfg_labels[i];
- imux->items[imux->num_items].index = idx;
- imux->num_items++;
- }
- }
- }
- return 0;
-}
+#define alc662_auto_create_input_ctls \
+ alc880_auto_create_input_ctls
static void alc662_auto_set_output_and_unmute(struct hda_codec *codec,
hda_nid_t nid, int pin_type,
for (i = 0; i < AUTO_PIN_LAST; i++) {
hda_nid_t nid = spec->autocfg.input_pins[i];
- if (alc662_is_input_pin(codec, nid)) {
+ if (alc_is_input_pin(codec, nid)) {
alc_set_input_pin(codec, nid, i);
if (nid != ALC662_PIN_CD_NID &&
(get_wcaps(codec, nid) & AC_WCAP_OUT_AMP))
"Headphone");
if (err < 0)
return err;
- err = alc662_auto_create_analog_input_ctls(codec, &spec->autocfg);
+ err = alc662_auto_create_input_ctls(codec, &spec->autocfg);
if (err < 0)
return err;
alc662_models,
alc662_cfg_tbl);
if (board_config < 0) {
- printk(KERN_INFO "hda_codec: Unknown model for %s, "
- "trying auto-probe from BIOS...\n", codec->chip_name);
+ printk(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
+ codec->chip_name);
board_config = ALC662_AUTO;
}
}
if (board_config != ALC662_AUTO)
- setup_preset(spec, &alc662_presets[board_config]);
+ setup_preset(codec, &alc662_presets[board_config]);
spec->stream_analog_playback = &alc662_pcm_analog_playback;
spec->stream_analog_capture = &alc662_pcm_analog_capture;
spec->stream_digital_playback = &alc662_pcm_digital_playback;
spec->stream_digital_capture = &alc662_pcm_digital_capture;
- spec->adc_nids = alc662_adc_nids;
- spec->num_adc_nids = ARRAY_SIZE(alc662_adc_nids);
- spec->capsrc_nids = alc662_capsrc_nids;
+ if (!spec->adc_nids) {
+ spec->adc_nids = alc662_adc_nids;
+ spec->num_adc_nids = ARRAY_SIZE(alc662_adc_nids);
+ }
+ if (!spec->capsrc_nids)
+ spec->capsrc_nids = alc662_capsrc_nids;
if (!spec->cap_mixer)
- set_capture_mixer(spec);
+ set_capture_mixer(codec);
if (codec->vendor_id == 0x10ec0662)
set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
else
{ .id = 0x10ec0861, .name = "ALC861", .patch = patch_alc861 },
{ .id = 0x10ec0862, .name = "ALC861-VD", .patch = patch_alc861vd },
{ .id = 0x10ec0662, .rev = 0x100002, .name = "ALC662 rev2",
- .patch = patch_alc883 },
+ .patch = patch_alc882 },
{ .id = 0x10ec0662, .rev = 0x100101, .name = "ALC662 rev1",
.patch = patch_alc662 },
{ .id = 0x10ec0663, .name = "ALC663", .patch = patch_alc662 },
{ .id = 0x10ec0880, .name = "ALC880", .patch = patch_alc880 },
{ .id = 0x10ec0882, .name = "ALC882", .patch = patch_alc882 },
- { .id = 0x10ec0883, .name = "ALC883", .patch = patch_alc883 },
+ { .id = 0x10ec0883, .name = "ALC883", .patch = patch_alc882 },
{ .id = 0x10ec0885, .rev = 0x100101, .name = "ALC889A",
- .patch = patch_alc882 }, /* should be patch_alc883() in future */
+ .patch = patch_alc882 },
{ .id = 0x10ec0885, .rev = 0x100103, .name = "ALC889A",
- .patch = patch_alc882 }, /* should be patch_alc883() in future */
+ .patch = patch_alc882 },
{ .id = 0x10ec0885, .name = "ALC885", .patch = patch_alc882 },
- { .id = 0x10ec0887, .name = "ALC887", .patch = patch_alc883 },
+ { .id = 0x10ec0887, .name = "ALC887", .patch = patch_alc882 },
{ .id = 0x10ec0888, .rev = 0x100101, .name = "ALC1200",
- .patch = patch_alc883 },
- { .id = 0x10ec0888, .name = "ALC888", .patch = patch_alc883 },
- { .id = 0x10ec0889, .name = "ALC889", .patch = patch_alc883 },
+ .patch = patch_alc882 },
+ { .id = 0x10ec0888, .name = "ALC888", .patch = patch_alc882 },
+ { .id = 0x10ec0889, .name = "ALC889", .patch = patch_alc882 },
{} /* terminator */
};
STAC_INSERT_EVENT,
STAC_PWR_EVENT,
STAC_HP_EVENT,
+ STAC_LO_EVENT,
+ STAC_MIC_EVENT,
};
enum {
STAC_92HD73XX_AUTO,
STAC_92HD73XX_NO_JD, /* no jack-detection */
STAC_92HD73XX_REF,
+ STAC_92HD73XX_INTEL,
STAC_DELL_M6_AMIC,
STAC_DELL_M6_DMIC,
STAC_DELL_M6_BOTH,
STAC_DELL_EQ,
+ STAC_ALIENWARE_M17X,
STAC_92HD73XX_MODELS
};
struct snd_jack *jack;
};
+struct sigmatel_mic_route {
+ hda_nid_t pin;
+ unsigned char mux_idx;
+ unsigned char dmux_idx;
+};
+
struct sigmatel_spec {
struct snd_kcontrol_new *mixers[4];
unsigned int num_mixers;
unsigned int hp_detect: 1;
unsigned int spdif_mute: 1;
unsigned int check_volume_offset:1;
+ unsigned int auto_mic:1;
/* gpio lines */
unsigned int eapd_mask;
/* playback */
struct hda_input_mux *mono_mux;
- struct hda_input_mux *amp_mux;
unsigned int cur_mmux;
struct hda_multi_out multiout;
hda_nid_t dac_nids[5];
unsigned int num_dmuxes;
hda_nid_t *smux_nids;
unsigned int num_smuxes;
+ unsigned int num_analog_muxes;
+
+ unsigned long *capvols; /* amp-volume attr: HDA_COMPOSE_AMP_VAL() */
+ unsigned long *capsws; /* amp-mute attr: HDA_COMPOSE_AMP_VAL() */
+ unsigned int num_caps; /* number of capture volume/switch elements */
+
+ struct sigmatel_mic_route ext_mic;
+ struct sigmatel_mic_route int_mic;
+
const char **spdif_labels;
hda_nid_t dig_in_nid;
unsigned int cur_smux[2];
unsigned int cur_amux;
hda_nid_t *amp_nids;
- unsigned int num_amps;
unsigned int powerdown_adcs;
/* i/o switches */
struct hda_input_mux private_dimux;
struct hda_input_mux private_imux;
struct hda_input_mux private_smux;
- struct hda_input_mux private_amp_mux;
struct hda_input_mux private_mono_mux;
};
0x1a, 0x1b
};
-#define DELL_M6_AMP 2
-static hda_nid_t stac92hd73xx_amp_nids[3] = {
- 0x0b, 0x0c, 0x0e
-};
-
#define STAC92HD73XX_NUM_DMICS 2
static hda_nid_t stac92hd73xx_dmic_nids[STAC92HD73XX_NUM_DMICS + 1] = {
0x13, 0x14, 0
#define STAC92HD73_DAC_COUNT 5
-static hda_nid_t stac92hd73xx_mux_nids[4] = {
- 0x28, 0x29, 0x2a, 0x2b,
+static hda_nid_t stac92hd73xx_mux_nids[2] = {
+ 0x20, 0x21,
};
static hda_nid_t stac92hd73xx_dmux_nids[2] = {
0x22, 0x23,
};
-#define STAC92HD83XXX_NUM_DMICS 2
-static hda_nid_t stac92hd83xxx_dmic_nids[STAC92HD83XXX_NUM_DMICS + 1] = {
- 0x11, 0x12, 0
+#define STAC92HD73XX_NUM_CAPS 2
+static unsigned long stac92hd73xx_capvols[] = {
+ HDA_COMPOSE_AMP_VAL(0x20, 3, 0, HDA_OUTPUT),
+ HDA_COMPOSE_AMP_VAL(0x21, 3, 0, HDA_OUTPUT),
};
+#define stac92hd73xx_capsws stac92hd73xx_capvols
#define STAC92HD83_DAC_COUNT 3
-static hda_nid_t stac92hd83xxx_dmux_nids[2] = {
+static hda_nid_t stac92hd83xxx_mux_nids[2] = {
0x17, 0x18,
};
0x03, 0x0c, 0x20, 0x40,
};
-static hda_nid_t stac92hd83xxx_amp_nids[1] = {
- 0xc,
+#define STAC92HD83XXX_NUM_CAPS 2
+static unsigned long stac92hd83xxx_capvols[] = {
+ HDA_COMPOSE_AMP_VAL(0x17, 3, 0, HDA_OUTPUT),
+ HDA_COMPOSE_AMP_VAL(0x18, 3, 0, HDA_OUTPUT),
};
+#define stac92hd83xxx_capsws stac92hd83xxx_capvols
static hda_nid_t stac92hd71bxx_pwr_nids[3] = {
0x0a, 0x0d, 0x0f
0x22, 0
};
+#define STAC92HD71BXX_NUM_CAPS 2
+static unsigned long stac92hd71bxx_capvols[] = {
+ HDA_COMPOSE_AMP_VAL(0x1c, 3, 0, HDA_OUTPUT),
+ HDA_COMPOSE_AMP_VAL(0x1d, 3, 0, HDA_OUTPUT),
+};
+#define stac92hd71bxx_capsws stac92hd71bxx_capvols
+
static hda_nid_t stac925x_adc_nids[1] = {
0x03,
};
0x14,
};
+static unsigned long stac925x_capvols[] = {
+ HDA_COMPOSE_AMP_VAL(0x09, 3, 0, HDA_OUTPUT),
+};
+static unsigned long stac925x_capsws[] = {
+ HDA_COMPOSE_AMP_VAL(0x14, 3, 0, HDA_OUTPUT),
+};
+
static hda_nid_t stac922x_adc_nids[2] = {
0x06, 0x07,
};
0x12, 0x13,
};
+#define STAC922X_NUM_CAPS 2
+static unsigned long stac922x_capvols[] = {
+ HDA_COMPOSE_AMP_VAL(0x17, 3, 0, HDA_INPUT),
+ HDA_COMPOSE_AMP_VAL(0x18, 3, 0, HDA_INPUT),
+};
+#define stac922x_capsws stac922x_capvols
+
static hda_nid_t stac927x_slave_dig_outs[2] = {
0x1f, 0,
};
0x13, 0x14, 0
};
+#define STAC927X_NUM_CAPS 3
+static unsigned long stac927x_capvols[] = {
+ HDA_COMPOSE_AMP_VAL(0x18, 3, 0, HDA_INPUT),
+ HDA_COMPOSE_AMP_VAL(0x19, 3, 0, HDA_INPUT),
+ HDA_COMPOSE_AMP_VAL(0x1a, 3, 0, HDA_INPUT),
+};
+static unsigned long stac927x_capsws[] = {
+ HDA_COMPOSE_AMP_VAL(0x1b, 3, 0, HDA_OUTPUT),
+ HDA_COMPOSE_AMP_VAL(0x1c, 3, 0, HDA_OUTPUT),
+ HDA_COMPOSE_AMP_VAL(0x1d, 3, 0, HDA_OUTPUT),
+};
+
static const char *stac927x_spdif_labels[5] = {
"Digital Playback", "ADAT", "Analog Mux 1",
"Analog Mux 2", "Analog Mux 3"
0x17, 0x18, 0
};
+#define STAC9205_NUM_CAPS 2
+static unsigned long stac9205_capvols[] = {
+ HDA_COMPOSE_AMP_VAL(0x1b, 3, 0, HDA_INPUT),
+ HDA_COMPOSE_AMP_VAL(0x1c, 3, 0, HDA_INPUT),
+};
+static unsigned long stac9205_capsws[] = {
+ HDA_COMPOSE_AMP_VAL(0x1d, 3, 0, HDA_OUTPUT),
+ HDA_COMPOSE_AMP_VAL(0x1e, 3, 0, HDA_OUTPUT),
+};
+
static hda_nid_t stac9200_pin_nids[8] = {
0x08, 0x09, 0x0d, 0x0e,
0x0f, 0x10, 0x11, 0x12,
0x21, 0x22,
};
-#define stac92xx_amp_volume_info snd_hda_mixer_amp_volume_info
-
-static int stac92xx_amp_volume_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
- struct sigmatel_spec *spec = codec->spec;
- hda_nid_t nid = spec->amp_nids[spec->cur_amux];
-
- kcontrol->private_value ^= get_amp_nid(kcontrol);
- kcontrol->private_value |= nid;
-
- return snd_hda_mixer_amp_volume_get(kcontrol, ucontrol);
-}
-
-static int stac92xx_amp_volume_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
- struct sigmatel_spec *spec = codec->spec;
- hda_nid_t nid = spec->amp_nids[spec->cur_amux];
-
- kcontrol->private_value ^= get_amp_nid(kcontrol);
- kcontrol->private_value |= nid;
-
- return snd_hda_mixer_amp_volume_put(kcontrol, ucontrol);
-}
-
static int stac92xx_dmux_enum_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
struct sigmatel_spec *spec = codec->spec;
unsigned int adc_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
-
- return snd_hda_input_mux_put(codec, spec->input_mux, ucontrol,
- spec->mux_nids[adc_idx], &spec->cur_mux[adc_idx]);
+ const struct hda_input_mux *imux = spec->input_mux;
+ unsigned int idx, prev_idx;
+
+ idx = ucontrol->value.enumerated.item[0];
+ if (idx >= imux->num_items)
+ idx = imux->num_items - 1;
+ prev_idx = spec->cur_mux[adc_idx];
+ if (prev_idx == idx)
+ return 0;
+ if (idx < spec->num_analog_muxes) {
+ snd_hda_codec_write_cache(codec, spec->mux_nids[adc_idx], 0,
+ AC_VERB_SET_CONNECT_SEL,
+ imux->items[idx].index);
+ if (prev_idx >= spec->num_analog_muxes) {
+ imux = spec->dinput_mux;
+ /* 0 = analog */
+ snd_hda_codec_write_cache(codec,
+ spec->dmux_nids[adc_idx], 0,
+ AC_VERB_SET_CONNECT_SEL,
+ imux->items[0].index);
+ }
+ } else {
+ imux = spec->dinput_mux;
+ snd_hda_codec_write_cache(codec, spec->dmux_nids[adc_idx], 0,
+ AC_VERB_SET_CONNECT_SEL,
+ imux->items[idx - 1].index);
+ }
+ spec->cur_mux[adc_idx] = idx;
+ return 1;
}
static int stac92xx_mono_mux_enum_info(struct snd_kcontrol *kcontrol,
spec->mono_nid, &spec->cur_mmux);
}
-static int stac92xx_amp_mux_enum_info(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_info *uinfo)
-{
- struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
- struct sigmatel_spec *spec = codec->spec;
- return snd_hda_input_mux_info(spec->amp_mux, uinfo);
-}
-
-static int stac92xx_amp_mux_enum_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
- struct sigmatel_spec *spec = codec->spec;
-
- ucontrol->value.enumerated.item[0] = spec->cur_amux;
- return 0;
-}
-
-static int stac92xx_amp_mux_enum_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
- struct sigmatel_spec *spec = codec->spec;
- struct snd_kcontrol *ctl =
- snd_hda_find_mixer_ctl(codec, "Amp Capture Volume");
- if (!ctl)
- return -EINVAL;
-
- snd_ctl_notify(codec->bus->card, SNDRV_CTL_EVENT_MASK_VALUE |
- SNDRV_CTL_EVENT_MASK_INFO, &ctl->id);
-
- return snd_hda_input_mux_put(codec, spec->amp_mux, ucontrol,
- 0, &spec->cur_amux);
-}
-
#define stac92xx_aloopback_info snd_ctl_boolean_mono_info
static int stac92xx_aloopback_get(struct snd_kcontrol *kcontrol,
{}
};
-static struct hda_verb stac92hd73xx_6ch_core_init[] = {
- /* set master volume and direct control */
- { 0x1f, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
- /* setup adcs to point to mixer */
- { 0x20, AC_VERB_SET_CONNECT_SEL, 0x0b},
- { 0x21, AC_VERB_SET_CONNECT_SEL, 0x0b},
- { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- { 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- { 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- /* setup import muxs */
- { 0x28, AC_VERB_SET_CONNECT_SEL, 0x01},
- { 0x29, AC_VERB_SET_CONNECT_SEL, 0x01},
- { 0x2a, AC_VERB_SET_CONNECT_SEL, 0x01},
- { 0x2b, AC_VERB_SET_CONNECT_SEL, 0x00},
- {}
-};
-
static struct hda_verb dell_eq_core_init[] = {
/* set master volume to max value without distortion
* and direct control */
{ 0x1f, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xec},
- /* setup adcs to point to mixer */
- { 0x20, AC_VERB_SET_CONNECT_SEL, 0x0b},
- { 0x21, AC_VERB_SET_CONNECT_SEL, 0x0b},
- /* setup import muxs */
- { 0x28, AC_VERB_SET_CONNECT_SEL, 0x01},
- { 0x29, AC_VERB_SET_CONNECT_SEL, 0x01},
- { 0x2a, AC_VERB_SET_CONNECT_SEL, 0x01},
- { 0x2b, AC_VERB_SET_CONNECT_SEL, 0x00},
- {}
-};
-
-static struct hda_verb dell_m6_core_init[] = {
- { 0x1f, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
- /* setup adcs to point to mixer */
- { 0x20, AC_VERB_SET_CONNECT_SEL, 0x0b},
- { 0x21, AC_VERB_SET_CONNECT_SEL, 0x0b},
- /* setup import muxs */
- { 0x28, AC_VERB_SET_CONNECT_SEL, 0x01},
- { 0x29, AC_VERB_SET_CONNECT_SEL, 0x01},
- { 0x2a, AC_VERB_SET_CONNECT_SEL, 0x01},
- { 0x2b, AC_VERB_SET_CONNECT_SEL, 0x00},
{}
};
-static struct hda_verb stac92hd73xx_8ch_core_init[] = {
+static struct hda_verb stac92hd73xx_core_init[] = {
/* set master volume and direct control */
{ 0x1f, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
- /* setup adcs to point to mixer */
- { 0x20, AC_VERB_SET_CONNECT_SEL, 0x0b},
- { 0x21, AC_VERB_SET_CONNECT_SEL, 0x0b},
- { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- { 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- { 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- /* setup import muxs */
- { 0x28, AC_VERB_SET_CONNECT_SEL, 0x01},
- { 0x29, AC_VERB_SET_CONNECT_SEL, 0x01},
- { 0x2a, AC_VERB_SET_CONNECT_SEL, 0x01},
- { 0x2b, AC_VERB_SET_CONNECT_SEL, 0x03},
- {}
-};
-
-static struct hda_verb stac92hd73xx_10ch_core_init[] = {
- /* set master volume and direct control */
- { 0x1f, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
- /* dac3 is connected to import3 mux */
- { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, 0xb07f},
- /* setup adcs to point to mixer */
- { 0x20, AC_VERB_SET_CONNECT_SEL, 0x0b},
- { 0x21, AC_VERB_SET_CONNECT_SEL, 0x0b},
- { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- { 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- { 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- /* setup import muxs */
- { 0x28, AC_VERB_SET_CONNECT_SEL, 0x01},
- { 0x29, AC_VERB_SET_CONNECT_SEL, 0x01},
- { 0x2a, AC_VERB_SET_CONNECT_SEL, 0x01},
- { 0x2b, AC_VERB_SET_CONNECT_SEL, 0x03},
{}
};
{}
};
-#define HD_DISABLE_PORTF 1
-static struct hda_verb stac92hd71bxx_analog_core_init[] = {
- /* start of config #1 */
-
- /* connect port 0f to audio mixer */
- { 0x0f, AC_VERB_SET_CONNECT_SEL, 0x2},
- /* start of config #2 */
-
- /* set master volume and direct control */
- { 0x28, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
- {}
-};
-
static struct hda_verb stac92hd71bxx_unmute_core_init[] = {
/* unmute right and left channels for nodes 0x0f, 0xa, 0x0d */
{ 0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
.put = stac92xx_mono_mux_enum_put, \
}
-#define STAC_AMP_MUX \
- { \
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
- .name = "Amp Selector Capture Switch", \
- .count = 1, \
- .info = stac92xx_amp_mux_enum_info, \
- .get = stac92xx_amp_mux_enum_get, \
- .put = stac92xx_amp_mux_enum_put, \
- }
-
-#define STAC_AMP_VOL(xname, nid, chs, idx, dir) \
- { \
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
- .name = xname, \
- .index = 0, \
- .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | \
- SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
- SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK, \
- .info = stac92xx_amp_volume_info, \
- .get = stac92xx_amp_volume_get, \
- .put = stac92xx_amp_volume_put, \
- .tlv = { .c = snd_hda_mixer_amp_tlv }, \
- .private_value = HDA_COMPOSE_AMP_VAL(nid, chs, idx, dir) \
- }
-
#define STAC_ANALOG_LOOPBACK(verb_read, verb_write, cnt) \
{ \
.iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
{ } /* end */
};
-#define DELL_M6_MIXER 6
-static struct snd_kcontrol_new stac92hd73xx_6ch_mixer[] = {
- /* start of config #1 */
- HDA_CODEC_VOLUME("Front Mic Mixer Capture Volume", 0x1d, 0, HDA_INPUT),
- HDA_CODEC_MUTE("Front Mic Mixer Capture Switch", 0x1d, 0, HDA_INPUT),
-
- HDA_CODEC_VOLUME("Line In Mixer Capture Volume", 0x1d, 0x2, HDA_INPUT),
- HDA_CODEC_MUTE("Line In Mixer Capture Switch", 0x1d, 0x2, HDA_INPUT),
-
- HDA_CODEC_VOLUME("CD Mixer Capture Volume", 0x1d, 0x4, HDA_INPUT),
- HDA_CODEC_MUTE("CD Mixer Capture Switch", 0x1d, 0x4, HDA_INPUT),
-
- /* start of config #2 */
- HDA_CODEC_VOLUME("Mic Mixer Capture Volume", 0x1d, 0x1, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Mixer Capture Switch", 0x1d, 0x1, HDA_INPUT),
-
- HDA_CODEC_VOLUME("DAC Mixer Capture Volume", 0x1d, 0x3, HDA_INPUT),
- HDA_CODEC_MUTE("DAC Mixer Capture Switch", 0x1d, 0x3, HDA_INPUT),
-
- HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x20, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x20, 0x0, HDA_OUTPUT),
-
- HDA_CODEC_VOLUME_IDX("Capture Volume", 0x1, 0x21, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 0x1, 0x21, 0x0, HDA_OUTPUT),
-
- { } /* end */
-};
-
static struct snd_kcontrol_new stac92hd73xx_6ch_loopback[] = {
STAC_ANALOG_LOOPBACK(0xFA0, 0x7A1, 3),
{}
{}
};
-static struct snd_kcontrol_new stac92hd73xx_8ch_mixer[] = {
- HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x20, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x20, 0x0, HDA_OUTPUT),
-
- HDA_CODEC_VOLUME_IDX("Capture Volume", 0x1, 0x21, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 0x1, 0x21, 0x0, HDA_OUTPUT),
-
- HDA_CODEC_VOLUME("Front Mic Mixer Capture Volume", 0x1d, 0, HDA_INPUT),
- HDA_CODEC_MUTE("Front Mic Mixer Capture Switch", 0x1d, 0, HDA_INPUT),
-
- HDA_CODEC_VOLUME("Mic Mixer Capture Volume", 0x1d, 0x1, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Mixer Capture Switch", 0x1d, 0x1, HDA_INPUT),
-
- HDA_CODEC_VOLUME("Line In Mixer Capture Volume", 0x1d, 0x2, HDA_INPUT),
- HDA_CODEC_MUTE("Line In Mixer Capture Switch", 0x1d, 0x2, HDA_INPUT),
-
- HDA_CODEC_VOLUME("DAC Mixer Capture Volume", 0x1d, 0x3, HDA_INPUT),
- HDA_CODEC_MUTE("DAC Mixer Capture Switch", 0x1d, 0x3, HDA_INPUT),
-
- HDA_CODEC_VOLUME("CD Mixer Capture Volume", 0x1d, 0x4, HDA_INPUT),
- HDA_CODEC_MUTE("CD Mixer Capture Switch", 0x1d, 0x4, HDA_INPUT),
- { } /* end */
-};
-
-static struct snd_kcontrol_new stac92hd73xx_10ch_mixer[] = {
- HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x20, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x20, 0x0, HDA_OUTPUT),
-
- HDA_CODEC_VOLUME_IDX("Capture Volume", 0x1, 0x21, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 0x1, 0x21, 0x0, HDA_OUTPUT),
-
- HDA_CODEC_VOLUME("Front Mic Mixer Capture Volume", 0x1d, 0, HDA_INPUT),
- HDA_CODEC_MUTE("Front Mic Mixer Capture Switch", 0x1d, 0, HDA_INPUT),
-
- HDA_CODEC_VOLUME("Mic Mixer Capture Volume", 0x1d, 0x1, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Mixer Capture Switch", 0x1d, 0x1, HDA_INPUT),
-
- HDA_CODEC_VOLUME("Line In Mixer Capture Volume", 0x1d, 0x2, HDA_INPUT),
- HDA_CODEC_MUTE("Line In Mixer Capture Switch", 0x1d, 0x2, HDA_INPUT),
-
- HDA_CODEC_VOLUME("DAC Mixer Capture Volume", 0x1d, 0x3, HDA_INPUT),
- HDA_CODEC_MUTE("DAC Mixer Capture Switch", 0x1d, 0x3, HDA_INPUT),
-
- HDA_CODEC_VOLUME("CD Mixer Capture Volume", 0x1d, 0x4, HDA_INPUT),
- HDA_CODEC_MUTE("CD Mixer Capture Switch", 0x1d, 0x4, HDA_INPUT),
- { } /* end */
-};
-
-
-static struct snd_kcontrol_new stac92hd83xxx_mixer[] = {
- HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x17, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x17, 0x0, HDA_OUTPUT),
-
- HDA_CODEC_VOLUME_IDX("Capture Volume", 0x1, 0x18, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 0x1, 0x18, 0x0, HDA_OUTPUT),
-
- HDA_CODEC_VOLUME("DAC0 Capture Volume", 0x1b, 0x3, HDA_INPUT),
- HDA_CODEC_MUTE("DAC0 Capture Switch", 0x1b, 0x3, HDA_INPUT),
-
- HDA_CODEC_VOLUME("DAC1 Capture Volume", 0x1b, 0x4, HDA_INPUT),
- HDA_CODEC_MUTE("DAC1 Capture Switch", 0x1b, 0x4, HDA_INPUT),
-
- HDA_CODEC_VOLUME("Front Mic Capture Volume", 0x1b, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Front Mic Capture Switch", 0x1b, 0x0, HDA_INPUT),
-
- HDA_CODEC_VOLUME("Line In Capture Volume", 0x1b, 0x2, HDA_INPUT),
- HDA_CODEC_MUTE("Line In Capture Switch", 0x1b, 0x2, HDA_INPUT),
-
- /*
- HDA_CODEC_VOLUME("Mic Capture Volume", 0x1b, 0x1, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Capture Switch", 0x1b 0x1, HDA_INPUT),
- */
- { } /* end */
-};
-
-static struct snd_kcontrol_new stac92hd71bxx_analog_mixer[] = {
- HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x1c, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x1c, 0x0, HDA_OUTPUT),
-
- HDA_CODEC_VOLUME_IDX("Capture Volume", 0x1, 0x1d, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 0x1, 0x1d, 0x0, HDA_OUTPUT),
- /* analog pc-beep replaced with digital beep support */
- /*
- HDA_CODEC_VOLUME("PC Beep Volume", 0x17, 0x2, HDA_INPUT),
- HDA_CODEC_MUTE("PC Beep Switch", 0x17, 0x2, HDA_INPUT),
- */
-
- HDA_CODEC_MUTE("Import0 Mux Capture Switch", 0x17, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Import0 Mux Capture Volume", 0x17, 0x0, HDA_INPUT),
-
- HDA_CODEC_MUTE("Import1 Mux Capture Switch", 0x17, 0x1, HDA_INPUT),
- HDA_CODEC_VOLUME("Import1 Mux Capture Volume", 0x17, 0x1, HDA_INPUT),
-
- HDA_CODEC_MUTE("DAC0 Capture Switch", 0x17, 0x3, HDA_INPUT),
- HDA_CODEC_VOLUME("DAC0 Capture Volume", 0x17, 0x3, HDA_INPUT),
-
- HDA_CODEC_MUTE("DAC1 Capture Switch", 0x17, 0x4, HDA_INPUT),
- HDA_CODEC_VOLUME("DAC1 Capture Volume", 0x17, 0x4, HDA_INPUT),
- { } /* end */
-};
static struct snd_kcontrol_new stac92hd71bxx_loopback[] = {
STAC_ANALOG_LOOPBACK(0xFA0, 0x7A0, 2)
};
-static struct snd_kcontrol_new stac92hd71bxx_mixer[] = {
- HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x1c, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x1c, 0x0, HDA_OUTPUT),
-
- HDA_CODEC_VOLUME_IDX("Capture Volume", 0x1, 0x1d, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 0x1, 0x1d, 0x0, HDA_OUTPUT),
- { } /* end */
-};
-
static struct snd_kcontrol_new stac925x_mixer[] = {
HDA_CODEC_VOLUME("Master Playback Volume", 0x0e, 0, HDA_OUTPUT),
HDA_CODEC_MUTE("Master Playback Switch", 0x0e, 0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Capture Volume", 0x09, 0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x14, 0, HDA_OUTPUT),
- { } /* end */
-};
-
-static struct snd_kcontrol_new stac9205_mixer[] = {
- HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x1b, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x1d, 0x0, HDA_OUTPUT),
-
- HDA_CODEC_VOLUME_IDX("Capture Volume", 0x1, 0x1c, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 0x1, 0x1e, 0x0, HDA_OUTPUT),
{ } /* end */
};
{}
};
-/* This needs to be generated dynamically based on sequence */
-static struct snd_kcontrol_new stac922x_mixer[] = {
- HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x17, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x17, 0x0, HDA_INPUT),
-
- HDA_CODEC_VOLUME_IDX("Capture Volume", 0x1, 0x18, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 0x1, 0x18, 0x0, HDA_INPUT),
- { } /* end */
-};
-
-
-static struct snd_kcontrol_new stac927x_mixer[] = {
- HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x18, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x1b, 0x0, HDA_OUTPUT),
-
- HDA_CODEC_VOLUME_IDX("Capture Volume", 0x1, 0x19, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 0x1, 0x1c, 0x0, HDA_OUTPUT),
-
- HDA_CODEC_VOLUME_IDX("Capture Volume", 0x2, 0x1A, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 0x2, 0x1d, 0x0, HDA_OUTPUT),
- { } /* end */
-};
-
static struct snd_kcontrol_new stac927x_loopback[] = {
STAC_ANALOG_LOOPBACK(0xFEB, 0x7EB, 1),
{}
int err;
int i;
- err = snd_hda_add_new_ctls(codec, spec->mixer);
- if (err < 0)
- return err;
+ if (spec->mixer) {
+ err = snd_hda_add_new_ctls(codec, spec->mixer);
+ if (err < 0)
+ return err;
+ }
for (i = 0; i < spec->num_mixers; i++) {
err = snd_hda_add_new_ctls(codec, spec->mixers[i]);
if (err < 0)
return err;
}
- if (spec->num_dmuxes > 0) {
+ if (!spec->auto_mic && spec->num_dmuxes > 0 &&
+ snd_hda_get_bool_hint(codec, "separate_dmux") == 1) {
stac_dmux_mixer.count = spec->num_dmuxes;
err = snd_hda_ctl_add(codec,
snd_ctl_new1(&stac_dmux_mixer, codec));
0x4f0000f0,
};
+static unsigned int alienware_m17x_pin_configs[13] = {
+ 0x0321101f, 0x0321101f, 0x03a11020, 0x03014020,
+ 0x90170110, 0x4f0000f0, 0x4f0000f0, 0x4f0000f0,
+ 0x4f0000f0, 0x90a60160, 0x4f0000f0, 0x4f0000f0,
+ 0x904601b0,
+};
+
static unsigned int *stac92hd73xx_brd_tbl[STAC_92HD73XX_MODELS] = {
[STAC_92HD73XX_REF] = ref92hd73xx_pin_configs,
[STAC_DELL_M6_AMIC] = dell_m6_pin_configs,
[STAC_DELL_M6_DMIC] = dell_m6_pin_configs,
[STAC_DELL_M6_BOTH] = dell_m6_pin_configs,
[STAC_DELL_EQ] = dell_m6_pin_configs,
+ [STAC_ALIENWARE_M17X] = alienware_m17x_pin_configs,
};
static const char *stac92hd73xx_models[STAC_92HD73XX_MODELS] = {
[STAC_92HD73XX_AUTO] = "auto",
[STAC_92HD73XX_NO_JD] = "no-jd",
[STAC_92HD73XX_REF] = "ref",
+ [STAC_92HD73XX_INTEL] = "intel",
[STAC_DELL_M6_AMIC] = "dell-m6-amic",
[STAC_DELL_M6_DMIC] = "dell-m6-dmic",
[STAC_DELL_M6_BOTH] = "dell-m6",
[STAC_DELL_EQ] = "dell-eq",
+ [STAC_ALIENWARE_M17X] = "alienware",
};
static struct snd_pci_quirk stac92hd73xx_cfg_tbl[] = {
"DFI LanParty", STAC_92HD73XX_REF),
SND_PCI_QUIRK(PCI_VENDOR_ID_DFI, 0x3101,
"DFI LanParty", STAC_92HD73XX_REF),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x5002,
+ "Intel DG45ID", STAC_92HD73XX_INTEL),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x5003,
+ "Intel DG45FC", STAC_92HD73XX_INTEL),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0254,
"Dell Studio 1535", STAC_DELL_M6_DMIC),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0255,
"Dell Studio 1537", STAC_DELL_M6_DMIC),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02a0,
"Dell Studio 17", STAC_DELL_M6_DMIC),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02be,
+ "Dell Studio 1555", STAC_DELL_M6_DMIC),
+ {} /* terminator */
+};
+
+static struct snd_pci_quirk stac92hd73xx_codec_id_cfg_tbl[] = {
+ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02a1,
+ "Alienware M17x", STAC_ALIENWARE_M17X),
{} /* terminator */
};
"HP mini 1000", STAC_HP_M4),
SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x361b,
"HP HDX", STAC_HP_HDX), /* HDX16 */
+ SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x7010,
+ "HP", STAC_HP_DV5),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0233,
"unknown Dell", STAC_DELL_M4_1),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0234,
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x01f3, "Dell Inspiron 1420", STAC_DELL_BIOS),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0227, "Dell Vostro 1400 ", STAC_DELL_BIOS),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x022e, "Dell ", STAC_DELL_BIOS),
- SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x022f, "Dell Inspiron 1525", STAC_DELL_3ST),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x022f, "Dell Inspiron 1525", STAC_DELL_BIOS),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0242, "Dell ", STAC_DELL_BIOS),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0243, "Dell ", STAC_DELL_BIOS),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02ff, "Dell ", STAC_DELL_BIOS),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0228,
"Dell Vostro 1500", STAC_9205_DELL_M42),
/* Gateway */
+ SND_PCI_QUIRK(0x107b, 0x0560, "Gateway T6834c", STAC_9205_EAPD),
SND_PCI_QUIRK(0x107b, 0x0565, "Gateway T1616", STAC_9205_EAPD),
{} /* terminator */
};
return 0;
}
-static void stac_issue_unsol_event(struct hda_codec *codec, hda_nid_t nid,
- unsigned char type);
+static void stac_issue_unsol_event(struct hda_codec *codec, hda_nid_t nid);
static int stac92xx_hp_switch_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
/* check to be sure that the ports are upto date with
* switch changes
*/
- stac_issue_unsol_event(codec, nid, STAC_HP_EVENT);
+ stac_issue_unsol_event(codec, nid);
return 1;
}
* appropriately according to the pin direction
*/
if (spec->hp_detect)
- stac_issue_unsol_event(codec, nid, STAC_HP_EVENT);
+ stac_issue_unsol_event(codec, nid);
return 1;
}
STAC_CTL_WIDGET_VOL,
STAC_CTL_WIDGET_MUTE,
STAC_CTL_WIDGET_MONO_MUX,
- STAC_CTL_WIDGET_AMP_MUX,
- STAC_CTL_WIDGET_AMP_VOL,
STAC_CTL_WIDGET_HP_SWITCH,
STAC_CTL_WIDGET_IO_SWITCH,
STAC_CTL_WIDGET_CLFE_SWITCH,
HDA_CODEC_VOLUME(NULL, 0, 0, 0),
HDA_CODEC_MUTE(NULL, 0, 0, 0),
STAC_MONO_MUX,
- STAC_AMP_MUX,
- STAC_AMP_VOL(NULL, 0, 0, 0, 0),
STAC_CODEC_HP_SWITCH(NULL),
STAC_CODEC_IO_SWITCH(NULL, 0),
STAC_CODEC_CLFE_SWITCH(NULL, 0),
struct snd_kcontrol_new *knew;
struct hda_input_mux *imux = &spec->private_imux;
+ if (spec->auto_mic)
+ return 0; /* no need for input source */
if (!spec->num_adcs || imux->num_items <= 1)
return 0; /* no need for input source control */
knew = stac_control_new(spec, &stac_input_src_temp,
HDA_MAX_CONNECTIONS);
for (j = 0; j < conn_len; j++) {
wcaps = get_wcaps(codec, conn[j]);
- wtype = (wcaps & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
+ wtype = get_wcaps_type(wcaps);
/* we check only analog outputs */
if (wtype != AC_WID_AUD_OUT || (wcaps & AC_WCAP_DIGITAL))
continue;
return 0;
}
+static int stac92xx_add_capvol_ctls(struct hda_codec *codec, unsigned long vol,
+ unsigned long sw, int idx)
+{
+ int err;
+ err = stac92xx_add_control_idx(codec->spec, STAC_CTL_WIDGET_VOL, idx,
+ "Capture Volume", vol);
+ if (err < 0)
+ return err;
+ err = stac92xx_add_control_idx(codec->spec, STAC_CTL_WIDGET_MUTE, idx,
+ "Capture Switch", sw);
+ if (err < 0)
+ return err;
+ return 0;
+}
+
/* add playback controls from the parsed DAC table */
static int stac92xx_auto_create_multi_out_ctls(struct hda_codec *codec,
const struct auto_pin_cfg *cfg)
spec->mono_nid,
con_lst,
HDA_MAX_NUM_INPUTS);
- if (!num_cons || num_cons > ARRAY_SIZE(stac92xx_mono_labels))
+ if (num_cons <= 0 || num_cons > ARRAY_SIZE(stac92xx_mono_labels))
return -EINVAL;
for (i = 0; i < num_cons; i++) {
"Mono Mux", spec->mono_nid);
}
-/* labels for amp mux outputs */
-static const char *stac92xx_amp_labels[3] = {
- "Front Microphone", "Microphone", "Line In",
-};
-
-/* create amp out controls mux on capable codecs */
-static int stac92xx_auto_create_amp_output_ctls(struct hda_codec *codec)
-{
- struct sigmatel_spec *spec = codec->spec;
- struct hda_input_mux *amp_mux = &spec->private_amp_mux;
- int i, err;
-
- for (i = 0; i < spec->num_amps; i++) {
- amp_mux->items[amp_mux->num_items].label =
- stac92xx_amp_labels[i];
- amp_mux->items[amp_mux->num_items].index = i;
- amp_mux->num_items++;
- }
-
- if (spec->num_amps > 1) {
- err = stac92xx_add_control(spec, STAC_CTL_WIDGET_AMP_MUX,
- "Amp Selector Capture Switch", 0);
- if (err < 0)
- return err;
- }
- return stac92xx_add_control(spec, STAC_CTL_WIDGET_AMP_VOL,
- "Amp Capture Volume",
- HDA_COMPOSE_AMP_VAL(spec->amp_nids[0], 3, 0, HDA_INPUT));
-}
-
-
/* create PC beep volume controls */
static int stac92xx_auto_create_beep_ctls(struct hda_codec *codec,
hda_nid_t nid)
static int stac92xx_auto_create_mux_input_ctls(struct hda_codec *codec)
{
struct sigmatel_spec *spec = codec->spec;
- int wcaps, nid, i, err = 0;
+ int i, j, err = 0;
for (i = 0; i < spec->num_muxes; i++) {
+ hda_nid_t nid;
+ unsigned int wcaps;
+ unsigned long val;
+
nid = spec->mux_nids[i];
wcaps = get_wcaps(codec, nid);
+ if (!(wcaps & AC_WCAP_OUT_AMP))
+ continue;
- if (wcaps & AC_WCAP_OUT_AMP) {
- err = stac92xx_add_control_idx(spec,
- STAC_CTL_WIDGET_VOL, i, "Mux Capture Volume",
- HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT));
- if (err < 0)
- return err;
+ /* check whether already the same control was created as
+ * normal Capture Volume.
+ */
+ val = HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT);
+ for (j = 0; j < spec->num_caps; j++) {
+ if (spec->capvols[j] == val)
+ break;
}
+ if (j < spec->num_caps)
+ continue;
+
+ err = stac92xx_add_control_idx(spec, STAC_CTL_WIDGET_VOL, i,
+ "Mux Capture Volume", val);
+ if (err < 0)
+ return err;
}
return 0;
};
spec->smux_nids[0],
con_lst,
HDA_MAX_NUM_INPUTS);
- if (!num_cons)
+ if (num_cons <= 0)
return -EINVAL;
if (!labels)
"Digital Mic 3", "Digital Mic 4"
};
+static int get_connection_index(struct hda_codec *codec, hda_nid_t mux,
+ hda_nid_t nid)
+{
+ hda_nid_t conn[HDA_MAX_NUM_INPUTS];
+ int i, nums;
+
+ nums = snd_hda_get_connections(codec, mux, conn, ARRAY_SIZE(conn));
+ for (i = 0; i < nums; i++)
+ if (conn[i] == nid)
+ return i;
+ return -1;
+}
+
+/* create a volume assigned to the given pin (only if supported) */
+/* return 1 if the volume control is created */
+static int create_elem_capture_vol(struct hda_codec *codec, hda_nid_t nid,
+ const char *label, int direction)
+{
+ unsigned int caps, nums;
+ char name[32];
+ int err;
+
+ if (direction == HDA_OUTPUT)
+ caps = AC_WCAP_OUT_AMP;
+ else
+ caps = AC_WCAP_IN_AMP;
+ if (!(get_wcaps(codec, nid) & caps))
+ return 0;
+ caps = query_amp_caps(codec, nid, direction);
+ nums = (caps & AC_AMPCAP_NUM_STEPS) >> AC_AMPCAP_NUM_STEPS_SHIFT;
+ if (!nums)
+ return 0;
+ snprintf(name, sizeof(name), "%s Capture Volume", label);
+ err = stac92xx_add_control(codec->spec, STAC_CTL_WIDGET_VOL, name,
+ HDA_COMPOSE_AMP_VAL(nid, 3, 0, direction));
+ if (err < 0)
+ return err;
+ return 1;
+}
+
/* create playback/capture controls for input pins on dmic capable codecs */
static int stac92xx_auto_create_dmic_input_ctls(struct hda_codec *codec,
const struct auto_pin_cfg *cfg)
{
struct sigmatel_spec *spec = codec->spec;
+ struct hda_input_mux *imux = &spec->private_imux;
struct hda_input_mux *dimux = &spec->private_dimux;
- hda_nid_t con_lst[HDA_MAX_NUM_INPUTS];
- int err, i, j;
- char name[32];
+ int err, i, active_mics;
+ unsigned int def_conf;
dimux->items[dimux->num_items].label = stac92xx_dmic_labels[0];
dimux->items[dimux->num_items].index = 0;
dimux->num_items++;
+ active_mics = 0;
+ for (i = 0; i < spec->num_dmics; i++) {
+ /* check the validity: sometimes it's a dead vendor-spec node */
+ if (get_wcaps_type(get_wcaps(codec, spec->dmic_nids[i]))
+ != AC_WID_PIN)
+ continue;
+ def_conf = snd_hda_codec_get_pincfg(codec, spec->dmic_nids[i]);
+ if (get_defcfg_connect(def_conf) != AC_JACK_PORT_NONE)
+ active_mics++;
+ }
+
for (i = 0; i < spec->num_dmics; i++) {
hda_nid_t nid;
int index;
- int num_cons;
- unsigned int wcaps;
- unsigned int def_conf;
+ const char *label;
- def_conf = snd_hda_codec_get_pincfg(codec, spec->dmic_nids[i]);
+ nid = spec->dmic_nids[i];
+ if (get_wcaps_type(get_wcaps(codec, nid)) != AC_WID_PIN)
+ continue;
+ def_conf = snd_hda_codec_get_pincfg(codec, nid);
if (get_defcfg_connect(def_conf) == AC_JACK_PORT_NONE)
continue;
- nid = spec->dmic_nids[i];
- num_cons = snd_hda_get_connections(codec,
- spec->dmux_nids[0],
- con_lst,
- HDA_MAX_NUM_INPUTS);
- for (j = 0; j < num_cons; j++)
- if (con_lst[j] == nid) {
- index = j;
- goto found;
- }
- continue;
-found:
- wcaps = get_wcaps(codec, nid) &
- (AC_WCAP_OUT_AMP | AC_WCAP_IN_AMP);
+ index = get_connection_index(codec, spec->dmux_nids[0], nid);
+ if (index < 0)
+ continue;
- if (wcaps) {
- sprintf(name, "%s Capture Volume",
- stac92xx_dmic_labels[dimux->num_items]);
+ if (active_mics == 1)
+ label = "Digital Mic";
+ else
+ label = stac92xx_dmic_labels[dimux->num_items];
- err = stac92xx_add_control(spec,
- STAC_CTL_WIDGET_VOL,
- name,
- HDA_COMPOSE_AMP_VAL(nid, 3, 0,
- (wcaps & AC_WCAP_OUT_AMP) ?
- HDA_OUTPUT : HDA_INPUT));
+ err = create_elem_capture_vol(codec, nid, label, HDA_INPUT);
+ if (err < 0)
+ return err;
+ if (!err) {
+ err = create_elem_capture_vol(codec, nid, label,
+ HDA_OUTPUT);
if (err < 0)
return err;
}
- dimux->items[dimux->num_items].label =
- stac92xx_dmic_labels[dimux->num_items];
+ dimux->items[dimux->num_items].label = label;
dimux->items[dimux->num_items].index = index;
dimux->num_items++;
+ if (snd_hda_get_bool_hint(codec, "separate_dmux") != 1) {
+ imux->items[imux->num_items].label = label;
+ imux->items[imux->num_items].index = index;
+ imux->num_items++;
+ }
}
return 0;
}
+static int check_mic_pin(struct hda_codec *codec, hda_nid_t nid,
+ hda_nid_t *fixed, hda_nid_t *ext)
+{
+ unsigned int cfg;
+
+ if (!nid)
+ return 0;
+ cfg = snd_hda_codec_get_pincfg(codec, nid);
+ switch (get_defcfg_connect(cfg)) {
+ case AC_JACK_PORT_FIXED:
+ if (*fixed)
+ return 1; /* already occupied */
+ *fixed = nid;
+ break;
+ case AC_JACK_PORT_COMPLEX:
+ if (*ext)
+ return 1; /* already occupied */
+ *ext = nid;
+ break;
+ }
+ return 0;
+}
+
+static int set_mic_route(struct hda_codec *codec,
+ struct sigmatel_mic_route *mic,
+ hda_nid_t pin)
+{
+ struct sigmatel_spec *spec = codec->spec;
+ struct auto_pin_cfg *cfg = &spec->autocfg;
+ int i;
+
+ mic->pin = pin;
+ for (i = AUTO_PIN_MIC; i <= AUTO_PIN_FRONT_MIC; i++)
+ if (pin == cfg->input_pins[i])
+ break;
+ if (i <= AUTO_PIN_FRONT_MIC) {
+ /* analog pin */
+ mic->dmux_idx = 0;
+ i = get_connection_index(codec, spec->mux_nids[0], pin);
+ if (i < 0)
+ return -1;
+ mic->mux_idx = i;
+ } else if (spec->dmux_nids) {
+ /* digital pin */
+ mic->mux_idx = 0;
+ i = get_connection_index(codec, spec->dmux_nids[0], pin);
+ if (i < 0)
+ return -1;
+ mic->dmux_idx = i;
+ }
+ return 0;
+}
+
+/* return non-zero if the device is for automatic mic switch */
+static int stac_check_auto_mic(struct hda_codec *codec)
+{
+ struct sigmatel_spec *spec = codec->spec;
+ struct auto_pin_cfg *cfg = &spec->autocfg;
+ hda_nid_t fixed, ext;
+ int i;
+
+ for (i = AUTO_PIN_LINE; i < AUTO_PIN_LAST; i++) {
+ if (cfg->input_pins[i])
+ return 0; /* must be exclusively mics */
+ }
+ fixed = ext = 0;
+ for (i = AUTO_PIN_MIC; i <= AUTO_PIN_FRONT_MIC; i++)
+ if (check_mic_pin(codec, cfg->input_pins[i], &fixed, &ext))
+ return 0;
+ for (i = 0; i < spec->num_dmics; i++)
+ if (check_mic_pin(codec, spec->dmic_nids[i], &fixed, &ext))
+ return 0;
+ if (!fixed || !ext)
+ return 0;
+ if (!(get_wcaps(codec, ext) & AC_WCAP_UNSOL_CAP))
+ return 0; /* no unsol support */
+ if (set_mic_route(codec, &spec->ext_mic, ext) ||
+ set_mic_route(codec, &spec->int_mic, fixed))
+ return 0; /* something is wrong */
+ return 1;
+}
+
/* create playback/capture controls for input pins */
static int stac92xx_auto_create_analog_input_ctls(struct hda_codec *codec, const struct auto_pin_cfg *cfg)
{
struct sigmatel_spec *spec = codec->spec;
struct hda_input_mux *imux = &spec->private_imux;
- hda_nid_t con_lst[HDA_MAX_NUM_INPUTS];
- int i, j, k;
+ int i, j;
for (i = 0; i < AUTO_PIN_LAST; i++) {
- int index;
+ hda_nid_t nid = cfg->input_pins[i];
+ int index, err;
- if (!cfg->input_pins[i])
+ if (!nid)
continue;
index = -1;
for (j = 0; j < spec->num_muxes; j++) {
- int num_cons;
- num_cons = snd_hda_get_connections(codec,
- spec->mux_nids[j],
- con_lst,
- HDA_MAX_NUM_INPUTS);
- for (k = 0; k < num_cons; k++)
- if (con_lst[k] == cfg->input_pins[i]) {
- index = k;
- goto found;
- }
+ index = get_connection_index(codec, spec->mux_nids[j],
+ nid);
+ if (index >= 0)
+ break;
}
- continue;
- found:
+ if (index < 0)
+ continue;
+
+ err = create_elem_capture_vol(codec, nid,
+ auto_pin_cfg_labels[i],
+ HDA_INPUT);
+ if (err < 0)
+ return err;
+
imux->items[imux->num_items].label = auto_pin_cfg_labels[i];
imux->items[imux->num_items].index = index;
imux->num_items++;
}
+ spec->num_analog_muxes = imux->num_items;
if (imux->num_items) {
/*
{
struct sigmatel_spec *spec = codec->spec;
int hp_swap = 0;
- int err;
+ int i, err;
if ((err = snd_hda_parse_pin_def_config(codec,
&spec->autocfg,
if (snd_hda_get_connections(codec,
spec->autocfg.mono_out_pin, conn_list, 1) &&
snd_hda_get_connections(codec, conn_list[0],
- conn_list, 1)) {
+ conn_list, 1) > 0) {
int wcaps = get_wcaps(codec, conn_list[0]);
- int wid_type = (wcaps & AC_WCAP_TYPE)
- >> AC_WCAP_TYPE_SHIFT;
+ int wid_type = get_wcaps_type(wcaps);
/* LR swap check, some stac925x have a mux that
* changes the DACs output path instead of the
* mono-mux path.
spec->autocfg.line_outs = 0;
}
+ if (stac_check_auto_mic(codec)) {
+ spec->auto_mic = 1;
+ /* only one capture for auto-mic */
+ spec->num_adcs = 1;
+ spec->num_caps = 1;
+ spec->num_muxes = 1;
+ }
+
+ for (i = 0; i < spec->num_caps; i++) {
+ err = stac92xx_add_capvol_ctls(codec, spec->capvols[i],
+ spec->capsws[i], i);
+ if (err < 0)
+ return err;
+ }
+
err = stac92xx_auto_create_analog_input_ctls(codec, &spec->autocfg);
if (err < 0)
return err;
if (err < 0)
return err;
}
- if (spec->num_amps > 0) {
- err = stac92xx_auto_create_amp_output_ctls(codec);
- if (err < 0)
- return err;
- }
if (spec->num_dmics > 0 && !spec->dinput_mux)
if ((err = stac92xx_auto_create_dmic_input_ctls(codec,
&spec->autocfg)) < 0)
spec->dinput_mux = &spec->private_dimux;
spec->sinput_mux = &spec->private_smux;
spec->mono_mux = &spec->private_mono_mux;
- spec->amp_mux = &spec->private_amp_mux;
return 1;
}
jack->nid = nid;
jack->type = type;
- sprintf(name, "%s at %s %s Jack",
+ snprintf(name, sizeof(name), "%s at %s %s Jack",
snd_hda_get_jack_type(def_conf),
snd_hda_get_jack_connectivity(def_conf),
snd_hda_get_jack_location(def_conf));
}
static struct sigmatel_event *stac_get_event(struct hda_codec *codec,
- hda_nid_t nid, unsigned char type)
+ hda_nid_t nid)
{
struct sigmatel_spec *spec = codec->spec;
struct sigmatel_event *event = spec->events.list;
int i;
for (i = 0; i < spec->events.used; i++, event++) {
- if (event->nid == nid && event->type == type)
+ if (event->nid == nid)
return event;
}
return NULL;
return NULL;
}
-static void enable_pin_detect(struct hda_codec *codec, hda_nid_t nid,
- unsigned int type)
+/* check if given nid is a valid pin and no other events are assigned
+ * to it. If OK, assign the event, set the unsol flag, and returns 1.
+ * Otherwise, returns zero.
+ */
+static int enable_pin_detect(struct hda_codec *codec, hda_nid_t nid,
+ unsigned int type)
{
struct sigmatel_event *event;
int tag;
if (!(get_wcaps(codec, nid) & AC_WCAP_UNSOL_CAP))
- return;
- event = stac_get_event(codec, nid, type);
- if (event)
+ return 0;
+ event = stac_get_event(codec, nid);
+ if (event) {
+ if (event->type != type)
+ return 0;
tag = event->tag;
- else
+ } else {
tag = stac_add_event(codec->spec, nid, type, 0);
- if (tag < 0)
- return;
+ if (tag < 0)
+ return 0;
+ }
snd_hda_codec_write_cache(codec, nid, 0,
AC_VERB_SET_UNSOLICITED_ENABLE,
AC_USRSP_EN | tag);
+ return 1;
}
static int is_nid_hp_pin(struct auto_pin_cfg *cfg, hda_nid_t nid)
hda_nid_t nid = cfg->hp_pins[i];
enable_pin_detect(codec, nid, STAC_HP_EVENT);
}
+ if (cfg->line_out_type == AUTO_PIN_LINE_OUT &&
+ cfg->speaker_outs > 0) {
+ /* enable pin-detect for line-outs as well */
+ for (i = 0; i < cfg->line_outs; i++) {
+ hda_nid_t nid = cfg->line_out_pins[i];
+ enable_pin_detect(codec, nid, STAC_LO_EVENT);
+ }
+ }
+
/* force to enable the first line-out; the others are set up
* in unsol_event
*/
stac92xx_auto_set_pinctl(codec, spec->autocfg.line_out_pins[0],
AC_PINCTL_OUT_EN);
/* fake event to set up pins */
- stac_issue_unsol_event(codec, spec->autocfg.hp_pins[0],
- STAC_HP_EVENT);
+ stac_issue_unsol_event(codec, spec->autocfg.hp_pins[0]);
} else {
stac92xx_auto_init_multi_out(codec);
stac92xx_auto_init_hp_out(codec);
for (i = 0; i < cfg->hp_outs; i++)
stac_toggle_power_map(codec, cfg->hp_pins[i], 1);
}
+ if (spec->auto_mic) {
+ /* initialize connection to analog input */
+ if (spec->dmux_nids)
+ snd_hda_codec_write_cache(codec, spec->dmux_nids[0], 0,
+ AC_VERB_SET_CONNECT_SEL, 0);
+ if (enable_pin_detect(codec, spec->ext_mic.pin, STAC_MIC_EVENT))
+ stac_issue_unsol_event(codec, spec->ext_mic.pin);
+ }
for (i = 0; i < AUTO_PIN_LAST; i++) {
hda_nid_t nid = cfg->input_pins[i];
if (nid) {
}
conf = snd_hda_codec_get_pincfg(codec, nid);
if (get_defcfg_connect(conf) != AC_JACK_PORT_FIXED) {
- enable_pin_detect(codec, nid,
- STAC_INSERT_EVENT);
- stac_issue_unsol_event(codec, nid,
- STAC_INSERT_EVENT);
+ if (enable_pin_detect(codec, nid,
+ STAC_INSERT_EVENT))
+ stac_issue_unsol_event(codec, nid);
}
}
}
stac_toggle_power_map(codec, nid, 1);
continue;
}
- if (!stac_get_event(codec, nid, STAC_INSERT_EVENT)) {
- enable_pin_detect(codec, nid, STAC_PWR_EVENT);
- stac_issue_unsol_event(codec, nid, STAC_PWR_EVENT);
- }
+ if (enable_pin_detect(codec, nid, STAC_PWR_EVENT))
+ stac_issue_unsol_event(codec, nid);
}
if (spec->dac_list)
stac92xx_power_down(codec);
return 0;
}
+static void stac92xx_line_out_detect(struct hda_codec *codec,
+ int presence)
+{
+ struct sigmatel_spec *spec = codec->spec;
+ struct auto_pin_cfg *cfg = &spec->autocfg;
+ int i;
+
+ for (i = 0; i < cfg->line_outs; i++) {
+ if (presence)
+ break;
+ presence = get_pin_presence(codec, cfg->line_out_pins[i]);
+ if (presence) {
+ unsigned int pinctl;
+ pinctl = snd_hda_codec_read(codec,
+ cfg->line_out_pins[i], 0,
+ AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
+ if (pinctl & AC_PINCTL_IN_EN)
+ presence = 0; /* mic- or line-input */
+ }
+ }
+
+ if (presence) {
+ /* disable speakers */
+ for (i = 0; i < cfg->speaker_outs; i++)
+ stac92xx_reset_pinctl(codec, cfg->speaker_pins[i],
+ AC_PINCTL_OUT_EN);
+ if (spec->eapd_mask && spec->eapd_switch)
+ stac_gpio_set(codec, spec->gpio_mask,
+ spec->gpio_dir, spec->gpio_data &
+ ~spec->eapd_mask);
+ } else {
+ /* enable speakers */
+ for (i = 0; i < cfg->speaker_outs; i++)
+ stac92xx_set_pinctl(codec, cfg->speaker_pins[i],
+ AC_PINCTL_OUT_EN);
+ if (spec->eapd_mask && spec->eapd_switch)
+ stac_gpio_set(codec, spec->gpio_mask,
+ spec->gpio_dir, spec->gpio_data |
+ spec->eapd_mask);
+ }
+}
+
/* return non-zero if the hp-pin of the given array index isn't
* a jack-detection target
*/
for (i = 0; i < cfg->line_outs; i++)
stac92xx_reset_pinctl(codec, cfg->line_out_pins[i],
AC_PINCTL_OUT_EN);
- for (i = 0; i < cfg->speaker_outs; i++)
- stac92xx_reset_pinctl(codec, cfg->speaker_pins[i],
- AC_PINCTL_OUT_EN);
- if (spec->eapd_mask && spec->eapd_switch)
- stac_gpio_set(codec, spec->gpio_mask,
- spec->gpio_dir, spec->gpio_data &
- ~spec->eapd_mask);
} else {
/* enable lineouts */
if (spec->hp_switch)
for (i = 0; i < cfg->line_outs; i++)
stac92xx_set_pinctl(codec, cfg->line_out_pins[i],
AC_PINCTL_OUT_EN);
- for (i = 0; i < cfg->speaker_outs; i++)
- stac92xx_set_pinctl(codec, cfg->speaker_pins[i],
- AC_PINCTL_OUT_EN);
- if (spec->eapd_mask && spec->eapd_switch)
- stac_gpio_set(codec, spec->gpio_mask,
- spec->gpio_dir, spec->gpio_data |
- spec->eapd_mask);
}
+ stac92xx_line_out_detect(codec, presence);
/* toggle hp outs */
for (i = 0; i < cfg->hp_outs; i++) {
unsigned int val = AC_PINCTL_OUT_EN | AC_PINCTL_HP_EN;
}
}
-static void stac_issue_unsol_event(struct hda_codec *codec, hda_nid_t nid,
- unsigned char type)
+static void stac92xx_mic_detect(struct hda_codec *codec)
{
- struct sigmatel_event *event = stac_get_event(codec, nid, type);
+ struct sigmatel_spec *spec = codec->spec;
+ struct sigmatel_mic_route *mic;
+
+ if (get_pin_presence(codec, spec->ext_mic.pin))
+ mic = &spec->ext_mic;
+ else
+ mic = &spec->int_mic;
+ if (mic->dmux_idx)
+ snd_hda_codec_write_cache(codec, spec->dmux_nids[0], 0,
+ AC_VERB_SET_CONNECT_SEL,
+ mic->dmux_idx);
+ else
+ snd_hda_codec_write_cache(codec, spec->mux_nids[0], 0,
+ AC_VERB_SET_CONNECT_SEL,
+ mic->mux_idx);
+}
+
+static void stac_issue_unsol_event(struct hda_codec *codec, hda_nid_t nid)
+{
+ struct sigmatel_event *event = stac_get_event(codec, nid);
if (!event)
return;
codec->patch_ops.unsol_event(codec, (unsigned)event->tag << 26);
switch (event->type) {
case STAC_HP_EVENT:
+ case STAC_LO_EVENT:
stac92xx_hp_detect(codec);
- /* fallthru */
+ break;
+ case STAC_MIC_EVENT:
+ stac92xx_mic_detect(codec);
+ break;
+ }
+
+ switch (event->type) {
+ case STAC_HP_EVENT:
+ case STAC_LO_EVENT:
+ case STAC_MIC_EVENT:
case STAC_INSERT_EVENT:
case STAC_PWR_EVENT:
if (spec->num_pwrs > 0)
snd_hda_codec_resume_cache(codec);
/* fake event to set up pins again to override cached values */
if (spec->hp_detect)
- stac_issue_unsol_event(codec, spec->autocfg.hp_pins[0],
- STAC_HP_EVENT);
+ stac_issue_unsol_event(codec, spec->autocfg.hp_pins[0]);
return 0;
}
static int stac92xx_suspend(struct hda_codec *codec, pm_message_t state)
{
struct sigmatel_spec *spec = codec->spec;
+ int i;
+ hda_nid_t nid;
+
+ /* reset each pin before powering down DAC/ADC to avoid click noise */
+ nid = codec->start_nid;
+ for (i = 0; i < codec->num_nodes; i++, nid++) {
+ unsigned int wcaps = get_wcaps(codec, nid);
+ unsigned int wid_type = get_wcaps_type(wcaps);
+ if (wid_type == AC_WID_PIN)
+ snd_hda_codec_read(codec, nid, 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL, 0);
+ }
+
if (spec->eapd_mask)
stac_gpio_set(codec, spec->gpio_mask,
spec->gpio_dir, spec->gpio_data &
stac9200_models,
stac9200_cfg_tbl);
if (spec->board_config < 0)
- snd_printdd(KERN_INFO "hda_codec: Unknown model for STAC9200, using BIOS defaults\n");
+ snd_printdd(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
+ codec->chip_name);
else
stac92xx_set_config_regs(codec,
stac9200_brd_tbl[spec->board_config]);
stac925x_cfg_tbl);
again:
if (spec->board_config < 0)
- snd_printdd(KERN_INFO "hda_codec: Unknown model for STAC925x,"
- "using BIOS defaults\n");
+ snd_printdd(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
+ codec->chip_name);
else
stac92xx_set_config_regs(codec,
stac925x_brd_tbl[spec->board_config]);
spec->init = stac925x_core_init;
spec->mixer = stac925x_mixer;
+ spec->num_caps = 1;
+ spec->capvols = stac925x_capvols;
+ spec->capsws = stac925x_capsws;
err = stac92xx_parse_auto_config(codec, 0x8, 0x7);
if (!err) {
return 0;
}
-static struct hda_input_mux stac92hd73xx_dmux = {
- .num_items = 4,
- .items = {
- { "Analog Inputs", 0x0b },
- { "Digital Mic 1", 0x09 },
- { "Digital Mic 2", 0x0a },
- { "CD", 0x08 },
- }
-};
-
static int patch_stac92hd73xx(struct hda_codec *codec)
{
struct sigmatel_spec *spec;
STAC_92HD73XX_MODELS,
stac92hd73xx_models,
stac92hd73xx_cfg_tbl);
+ /* check codec subsystem id if not found */
+ if (spec->board_config < 0)
+ spec->board_config =
+ snd_hda_check_board_codec_sid_config(codec,
+ STAC_92HD73XX_MODELS, stac92hd73xx_models,
+ stac92hd73xx_codec_id_cfg_tbl);
again:
if (spec->board_config < 0)
- snd_printdd(KERN_INFO "hda_codec: Unknown model for"
- " STAC92HD73XX, using BIOS defaults\n");
+ snd_printdd(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
+ codec->chip_name);
else
stac92xx_set_config_regs(codec,
stac92hd73xx_brd_tbl[spec->board_config]);
"number of channels defaulting to DAC count\n");
num_dacs = STAC92HD73_DAC_COUNT;
}
+ spec->init = stac92hd73xx_core_init;
switch (num_dacs) {
case 0x3: /* 6 Channel */
- spec->mixer = stac92hd73xx_6ch_mixer;
- spec->init = stac92hd73xx_6ch_core_init;
spec->aloopback_ctl = stac92hd73xx_6ch_loopback;
break;
case 0x4: /* 8 Channel */
- spec->mixer = stac92hd73xx_8ch_mixer;
- spec->init = stac92hd73xx_8ch_core_init;
spec->aloopback_ctl = stac92hd73xx_8ch_loopback;
break;
case 0x5: /* 10 Channel */
- spec->mixer = stac92hd73xx_10ch_mixer;
- spec->init = stac92hd73xx_10ch_core_init;
spec->aloopback_ctl = stac92hd73xx_10ch_loopback;
break;
}
spec->dmic_nids = stac92hd73xx_dmic_nids;
spec->dmux_nids = stac92hd73xx_dmux_nids;
spec->smux_nids = stac92hd73xx_smux_nids;
- spec->amp_nids = stac92hd73xx_amp_nids;
- spec->num_amps = ARRAY_SIZE(stac92hd73xx_amp_nids);
spec->num_muxes = ARRAY_SIZE(stac92hd73xx_mux_nids);
spec->num_adcs = ARRAY_SIZE(stac92hd73xx_adc_nids);
spec->num_dmuxes = ARRAY_SIZE(stac92hd73xx_dmux_nids);
- memcpy(&spec->private_dimux, &stac92hd73xx_dmux,
- sizeof(stac92hd73xx_dmux));
+
+ spec->num_caps = STAC92HD73XX_NUM_CAPS;
+ spec->capvols = stac92hd73xx_capvols;
+ spec->capsws = stac92hd73xx_capsws;
switch (spec->board_config) {
case STAC_DELL_EQ:
case STAC_DELL_M6_DMIC:
case STAC_DELL_M6_BOTH:
spec->num_smuxes = 0;
- spec->mixer = &stac92hd73xx_6ch_mixer[DELL_M6_MIXER];
- spec->amp_nids = &stac92hd73xx_amp_nids[DELL_M6_AMP];
spec->eapd_switch = 0;
- spec->num_amps = 1;
- if (spec->board_config != STAC_DELL_EQ)
- spec->init = dell_m6_core_init;
switch (spec->board_config) {
case STAC_DELL_M6_AMIC: /* Analog Mics */
snd_hda_codec_set_pincfg(codec, 0x0b, 0x90A70170);
spec->num_dmics = 0;
- spec->private_dimux.num_items = 1;
break;
case STAC_DELL_M6_DMIC: /* Digital Mics */
snd_hda_codec_set_pincfg(codec, 0x13, 0x90A60160);
spec->num_dmics = 1;
- spec->private_dimux.num_items = 2;
break;
case STAC_DELL_M6_BOTH: /* Both */
snd_hda_codec_set_pincfg(codec, 0x0b, 0x90A70170);
snd_hda_codec_set_pincfg(codec, 0x13, 0x90A60160);
spec->num_dmics = 1;
- spec->private_dimux.num_items = 2;
break;
}
break;
+ case STAC_ALIENWARE_M17X:
+ spec->num_dmics = STAC92HD73XX_NUM_DMICS;
+ spec->num_smuxes = ARRAY_SIZE(stac92hd73xx_smux_nids);
+ spec->eapd_switch = 0;
+ break;
default:
spec->num_dmics = STAC92HD73XX_NUM_DMICS;
spec->num_smuxes = ARRAY_SIZE(stac92hd73xx_smux_nids);
spec->eapd_switch = 1;
+ break;
}
if (spec->board_config > STAC_92HD73XX_REF) {
/* GPIO0 High = Enable EAPD */
spec->eapd_mask = spec->gpio_mask = spec->gpio_dir = 0x1;
spec->gpio_data = 0x01;
}
- spec->dinput_mux = &spec->private_dimux;
spec->num_pwrs = ARRAY_SIZE(stac92hd73xx_pwr_nids);
spec->pwr_nids = stac92hd73xx_pwr_nids;
return 0;
}
-static struct hda_input_mux stac92hd83xxx_dmux = {
- .num_items = 3,
- .items = {
- { "Analog Inputs", 0x03 },
- { "Digital Mic 1", 0x04 },
- { "Digital Mic 2", 0x05 },
- }
-};
-
static int patch_stac92hd83xxx(struct hda_codec *codec)
{
struct sigmatel_spec *spec;
codec->slave_dig_outs = stac92hd83xxx_slave_dig_outs;
spec->mono_nid = 0x19;
spec->digbeep_nid = 0x21;
- spec->dmic_nids = stac92hd83xxx_dmic_nids;
- spec->dmux_nids = stac92hd83xxx_dmux_nids;
+ spec->mux_nids = stac92hd83xxx_mux_nids;
+ spec->num_muxes = ARRAY_SIZE(stac92hd83xxx_mux_nids);
spec->adc_nids = stac92hd83xxx_adc_nids;
+ spec->num_adcs = ARRAY_SIZE(stac92hd83xxx_adc_nids);
spec->pwr_nids = stac92hd83xxx_pwr_nids;
- spec->amp_nids = stac92hd83xxx_amp_nids;
spec->pwr_mapping = stac92hd83xxx_pwr_mapping;
spec->num_pwrs = ARRAY_SIZE(stac92hd83xxx_pwr_nids);
spec->multiout.dac_nids = spec->dac_nids;
spec->init = stac92hd83xxx_core_init;
- spec->mixer = stac92hd83xxx_mixer;
spec->num_pins = ARRAY_SIZE(stac92hd83xxx_pin_nids);
- spec->num_dmuxes = ARRAY_SIZE(stac92hd83xxx_dmux_nids);
- spec->num_adcs = ARRAY_SIZE(stac92hd83xxx_adc_nids);
- spec->num_amps = ARRAY_SIZE(stac92hd83xxx_amp_nids);
- spec->num_dmics = STAC92HD83XXX_NUM_DMICS;
- spec->dinput_mux = &stac92hd83xxx_dmux;
spec->pin_nids = stac92hd83xxx_pin_nids;
+ spec->num_caps = STAC92HD83XXX_NUM_CAPS;
+ spec->capvols = stac92hd83xxx_capvols;
+ spec->capsws = stac92hd83xxx_capsws;
+
spec->board_config = snd_hda_check_board_config(codec,
STAC_92HD83XXX_MODELS,
stac92hd83xxx_models,
stac92hd83xxx_cfg_tbl);
again:
if (spec->board_config < 0)
- snd_printdd(KERN_INFO "hda_codec: Unknown model for"
- " STAC92HD83XXX, using BIOS defaults\n");
+ snd_printdd(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
+ codec->chip_name);
else
stac92xx_set_config_regs(codec,
stac92hd83xxx_brd_tbl[spec->board_config]);
num_dacs = snd_hda_get_connections(codec, nid,
conn, STAC92HD83_DAC_COUNT + 1) - 1;
+ if (num_dacs < 0)
+ num_dacs = STAC92HD83_DAC_COUNT;
/* set port X to select the last DAC
*/
return 0;
}
-static struct hda_input_mux stac92hd71bxx_dmux_nomixer = {
- .num_items = 3,
- .items = {
- { "Analog Inputs", 0x00 },
- { "Digital Mic 1", 0x02 },
- { "Digital Mic 2", 0x03 },
- }
-};
-
-static struct hda_input_mux stac92hd71bxx_dmux_amixer = {
- .num_items = 4,
- .items = {
- { "Analog Inputs", 0x00 },
- { "Mixer", 0x01 },
- { "Digital Mic 1", 0x02 },
- { "Digital Mic 2", 0x03 },
- }
-};
-
/* get the pin connection (fixed, none, etc) */
static unsigned int stac_get_defcfg_connect(struct hda_codec *codec, int idx)
{
struct sigmatel_spec *spec;
struct hda_verb *unmute_init = stac92hd71bxx_unmute_core_init;
int err = 0;
- unsigned int ndmic_nids = 0;
spec = kzalloc(sizeof(*spec), GFP_KERNEL);
if (spec == NULL)
stac92hd71bxx_cfg_tbl);
again:
if (spec->board_config < 0)
- snd_printdd(KERN_INFO "hda_codec: Unknown model for"
- " STAC92HD71BXX, using BIOS defaults\n");
+ snd_printdd(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
+ codec->chip_name);
else
stac92xx_set_config_regs(codec,
stac92hd71bxx_brd_tbl[spec->board_config]);
spec->dmic_nids = stac92hd71bxx_dmic_nids;
spec->dmux_nids = stac92hd71bxx_dmux_nids;
+ spec->num_caps = STAC92HD71BXX_NUM_CAPS;
+ spec->capvols = stac92hd71bxx_capvols;
+ spec->capsws = stac92hd71bxx_capsws;
+
switch (codec->vendor_id) {
case 0x111d76b6: /* 4 Port without Analog Mixer */
case 0x111d76b7:
/* fallthru */
case 0x111d76b4: /* 6 Port without Analog Mixer */
case 0x111d76b5:
- memcpy(&spec->private_dimux, &stac92hd71bxx_dmux_nomixer,
- sizeof(stac92hd71bxx_dmux_nomixer));
- spec->mixer = stac92hd71bxx_mixer;
spec->init = stac92hd71bxx_core_init;
codec->slave_dig_outs = stac92hd71bxx_slave_dig_outs;
spec->num_dmics = stac92hd71bxx_connected_ports(codec,
stac92hd71bxx_dmic_nids,
STAC92HD71BXX_NUM_DMICS);
- if (spec->num_dmics) {
- spec->num_dmuxes = ARRAY_SIZE(stac92hd71bxx_dmux_nids);
- spec->dinput_mux = &spec->private_dimux;
- ndmic_nids = ARRAY_SIZE(stac92hd71bxx_dmic_nids) - 1;
- }
break;
case 0x111d7608: /* 5 Port with Analog Mixer */
- memcpy(&spec->private_dimux, &stac92hd71bxx_dmux_amixer,
- sizeof(stac92hd71bxx_dmux_amixer));
- spec->private_dimux.num_items--;
switch (spec->board_config) {
case STAC_HP_M4:
/* Enable VREF power saving on GPIO1 detect */
/* no output amps */
spec->num_pwrs = 0;
- spec->mixer = stac92hd71bxx_analog_mixer;
- spec->dinput_mux = &spec->private_dimux;
-
/* disable VSW */
- spec->init = &stac92hd71bxx_analog_core_init[HD_DISABLE_PORTF];
+ spec->init = stac92hd71bxx_core_init;
unmute_init++;
snd_hda_codec_set_pincfg(codec, 0x0f, 0x40f000f0);
snd_hda_codec_set_pincfg(codec, 0x19, 0x40f000f3);
spec->num_dmics = stac92hd71bxx_connected_ports(codec,
stac92hd71bxx_dmic_nids,
STAC92HD71BXX_NUM_DMICS - 1);
- spec->num_dmuxes = ARRAY_SIZE(stac92hd71bxx_dmux_nids);
- ndmic_nids = ARRAY_SIZE(stac92hd71bxx_dmic_nids) - 2;
break;
case 0x111d7603: /* 6 Port with Analog Mixer */
if ((codec->revision_id & 0xf) == 1)
spec->num_pwrs = 0;
/* fallthru */
default:
- memcpy(&spec->private_dimux, &stac92hd71bxx_dmux_amixer,
- sizeof(stac92hd71bxx_dmux_amixer));
- spec->dinput_mux = &spec->private_dimux;
- spec->mixer = stac92hd71bxx_analog_mixer;
- spec->init = stac92hd71bxx_analog_core_init;
+ spec->init = stac92hd71bxx_core_init;
codec->slave_dig_outs = stac92hd71bxx_slave_dig_outs;
spec->num_dmics = stac92hd71bxx_connected_ports(codec,
stac92hd71bxx_dmic_nids,
STAC92HD71BXX_NUM_DMICS);
- spec->num_dmuxes = ARRAY_SIZE(stac92hd71bxx_dmux_nids);
- ndmic_nids = ARRAY_SIZE(stac92hd71bxx_dmic_nids) - 1;
+ break;
}
if (get_wcaps(codec, 0xa) & AC_WCAP_IN_AMP)
spec->num_muxes = ARRAY_SIZE(stac92hd71bxx_mux_nids);
spec->num_adcs = ARRAY_SIZE(stac92hd71bxx_adc_nids);
+ spec->num_dmuxes = ARRAY_SIZE(stac92hd71bxx_dmux_nids);
spec->num_smuxes = stac92hd71bxx_connected_smuxes(codec, 0x1e);
switch (spec->board_config) {
#endif
spec->multiout.dac_nids = spec->dac_nids;
- if (spec->dinput_mux)
- spec->private_dimux.num_items += spec->num_dmics - ndmic_nids;
err = stac92xx_parse_auto_config(codec, 0x21, 0);
if (!err) {
again:
if (spec->board_config < 0)
- snd_printdd(KERN_INFO "hda_codec: Unknown model for STAC922x, "
- "using BIOS defaults\n");
+ snd_printdd(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
+ codec->chip_name);
else
stac92xx_set_config_regs(codec,
stac922x_brd_tbl[spec->board_config]);
spec->num_pwrs = 0;
spec->init = stac922x_core_init;
- spec->mixer = stac922x_mixer;
+
+ spec->num_caps = STAC922X_NUM_CAPS;
+ spec->capvols = stac922x_capvols;
+ spec->capsws = stac922x_capsws;
spec->multiout.dac_nids = spec->dac_nids;
stac927x_cfg_tbl);
again:
if (spec->board_config < 0)
- snd_printdd(KERN_INFO "hda_codec: Unknown model for"
- "STAC927x, using BIOS defaults\n");
+ snd_printdd(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
+ codec->chip_name);
else
stac92xx_set_config_regs(codec,
stac927x_brd_tbl[spec->board_config]);
spec->num_dmics = 0;
spec->init = d965_core_init;
- spec->mixer = stac927x_mixer;
break;
case STAC_DELL_BIOS:
switch (codec->subsystem_id) {
/* GPIO2 High = Enable EAPD */
spec->eapd_mask = spec->gpio_mask = spec->gpio_dir = 0x04;
spec->gpio_data = 0x04;
+ switch (codec->subsystem_id) {
+ case 0x1028022f:
+ /* correct EAPD to be GPIO0 */
+ spec->eapd_mask = spec->gpio_mask = 0x01;
+ spec->gpio_dir = spec->gpio_data = 0x01;
+ break;
+ };
spec->dmic_nids = stac927x_dmic_nids;
spec->num_dmics = STAC927X_NUM_DMICS;
spec->init = d965_core_init;
- spec->mixer = stac927x_mixer;
spec->dmux_nids = stac927x_dmux_nids;
spec->num_dmuxes = ARRAY_SIZE(stac927x_dmux_nids);
break;
spec->num_dmics = 0;
spec->init = stac927x_core_init;
- spec->mixer = stac927x_mixer;
}
+ spec->num_caps = STAC927X_NUM_CAPS;
+ spec->capvols = stac927x_capvols;
+ spec->capsws = stac927x_capsws;
+
spec->num_pwrs = 0;
spec->aloopback_ctl = stac927x_loopback;
spec->aloopback_mask = 0x40;
stac9205_cfg_tbl);
again:
if (spec->board_config < 0)
- snd_printdd(KERN_INFO "hda_codec: Unknown model for STAC9205, using BIOS defaults\n");
+ snd_printdd(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
+ codec->chip_name);
else
stac92xx_set_config_regs(codec,
stac9205_brd_tbl[spec->board_config]);
spec->num_pwrs = 0;
spec->init = stac9205_core_init;
- spec->mixer = stac9205_mixer;
spec->aloopback_ctl = stac9205_loopback;
+ spec->num_caps = STAC9205_NUM_CAPS;
+ spec->capvols = stac9205_capvols;
+ spec->capsws = stac9205_capsws;
+
spec->aloopback_mask = 0x40;
spec->aloopback_shift = 0;
/* Turn on/off EAPD per HP plugging */
{}
};
-static struct snd_kcontrol_new stac9872_mixer[] = {
- HDA_CODEC_VOLUME("Capture Volume", 0x09, 0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x09, 0, HDA_INPUT),
- { } /* end */
-};
-
static hda_nid_t stac9872_pin_nids[] = {
0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
0x11, 0x13, 0x14,
0x15
};
+static unsigned long stac9872_capvols[] = {
+ HDA_COMPOSE_AMP_VAL(0x09, 3, 0, HDA_INPUT),
+};
+#define stac9872_capsws stac9872_capvols
+
static unsigned int stac9872_vaio_pin_configs[9] = {
0x03211020, 0x411111f0, 0x411111f0, 0x03a15030,
0x411111f0, 0x90170110, 0x411111f0, 0x411111f0,
};
static struct snd_pci_quirk stac9872_cfg_tbl[] = {
+ SND_PCI_QUIRK_MASK(0x104d, 0xfff0, 0x81e0,
+ "Sony VAIO F/S", STAC_9872_VAIO),
{} /* terminator */
};
if (spec == NULL)
return -ENOMEM;
codec->spec = spec;
+ spec->num_pins = ARRAY_SIZE(stac9872_pin_nids);
+ spec->pin_nids = stac9872_pin_nids;
spec->board_config = snd_hda_check_board_config(codec, STAC_9872_MODELS,
stac9872_models,
stac9872_cfg_tbl);
if (spec->board_config < 0)
- snd_printdd(KERN_INFO "hda_codec: Unknown model for STAC9872, "
- "using BIOS defaults\n");
+ snd_printdd(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
+ codec->chip_name);
else
stac92xx_set_config_regs(codec,
stac9872_brd_tbl[spec->board_config]);
- spec->num_pins = ARRAY_SIZE(stac9872_pin_nids);
- spec->pin_nids = stac9872_pin_nids;
spec->multiout.dac_nids = spec->dac_nids;
spec->num_adcs = ARRAY_SIZE(stac9872_adc_nids);
spec->adc_nids = stac9872_adc_nids;
spec->num_muxes = ARRAY_SIZE(stac9872_mux_nids);
spec->mux_nids = stac9872_mux_nids;
- spec->mixer = stac9872_mixer;
spec->init = stac9872_core_init;
+ spec->num_caps = 1;
+ spec->capvols = stac9872_capvols;
+ spec->capsws = stac9872_capsws;
err = stac92xx_parse_auto_config(codec, 0x10, 0x12);
if (err < 0) {
for (i = 0; i < spec->num_adc_nids; i++) {
nid = spec->adc_nids[i];
while (nid) {
- type = (get_wcaps(codec, nid) & AC_WCAP_TYPE)
- >> AC_WCAP_TYPE_SHIFT;
+ type = get_wcaps_type(get_wcaps(codec, nid));
if (type == AC_WID_PIN)
break;
n = snd_hda_get_connections(codec, nid, conn,
if (!spec->adc_nids && spec->input_mux) {
spec->adc_nids = vt1708_adc_nids;
spec->num_adc_nids = ARRAY_SIZE(vt1708_adc_nids);
+ get_mux_nids(codec);
spec->mixers[spec->num_mixers] = vt1708_capture_mixer;
spec->num_mixers++;
}
unsigned char (*set_mclk)(struct snd_ice1712 *ice, unsigned int rate);
void (*set_spdif_clock)(struct snd_ice1712 *ice);
+#ifdef CONFIG_PM
+ int (*pm_suspend)(struct snd_ice1712 *);
+ int (*pm_resume)(struct snd_ice1712 *);
+ int pm_suspend_enabled:1;
+ int pm_saved_is_spdif_master:1;
+ unsigned int pm_saved_spdif_ctrl;
+ unsigned char pm_saved_spdif_cfg;
+ unsigned int pm_saved_route;
+#endif
};
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_SUSPEND:
spin_lock(&ice->reg_lock);
old = inb(ICEMT1724(ice, DMA_CONTROL));
if (cmd == SNDRV_PCM_TRIGGER_START)
spin_unlock(&ice->reg_lock);
break;
+ case SNDRV_PCM_TRIGGER_RESUME:
+ /* apps will have to restart stream */
+ break;
+
default:
return -EINVAL;
}
-static void __devinit snd_vt1724_chip_reset(struct snd_ice1712 *ice)
+static void snd_vt1724_chip_reset(struct snd_ice1712 *ice)
{
outb(VT1724_RESET , ICEREG1724(ice, CONTROL));
inb(ICEREG1724(ice, CONTROL)); /* pci posting flush */
msleep(10);
}
-static int __devinit snd_vt1724_chip_init(struct snd_ice1712 *ice)
+static int snd_vt1724_chip_init(struct snd_ice1712 *ice)
{
outb(ice->eeprom.data[ICE_EEP2_SYSCONF], ICEREG1724(ice, SYS_CFG));
outb(ice->eeprom.data[ICE_EEP2_ACLINK], ICEREG1724(ice, AC97_CFG));
outb(0, ICEREG1724(ice, POWERDOWN));
+ /* MPU_RX and TX irq masks are cleared later dynamically */
+ outb(VT1724_IRQ_MPU_RX | VT1724_IRQ_MPU_TX , ICEREG1724(ice, IRQMASK));
+
+ /* don't handle FIFO overrun/underruns (just yet),
+ * since they cause machine lockups
+ */
+ outb(VT1724_MULTI_FIFO_ERR, ICEMT1724(ice, DMA_INT_MASK));
+
return 0;
}
snd_vt1724_proc_init(ice);
synchronize_irq(pci->irq);
+ card->private_data = ice;
+
err = pci_request_regions(pci, "ICE1724");
if (err < 0) {
kfree(ice);
return -EIO;
}
- /* MPU_RX and TX irq masks are cleared later dynamically */
- outb(VT1724_IRQ_MPU_RX | VT1724_IRQ_MPU_TX , ICEREG1724(ice, IRQMASK));
-
- /* don't handle FIFO overrun/underruns (just yet),
- * since they cause machine lockups
- */
- outb(VT1724_MULTI_FIFO_ERR, ICEMT1724(ice, DMA_INT_MASK));
-
err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, ice, &ops);
if (err < 0) {
snd_vt1724_free(ice);
pci_set_drvdata(pci, NULL);
}
+#ifdef CONFIG_PM
+static int snd_vt1724_suspend(struct pci_dev *pci, pm_message_t state)
+{
+ struct snd_card *card = pci_get_drvdata(pci);
+ struct snd_ice1712 *ice = card->private_data;
+
+ if (!ice->pm_suspend_enabled)
+ return 0;
+
+ snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
+
+ snd_pcm_suspend_all(ice->pcm);
+ snd_pcm_suspend_all(ice->pcm_pro);
+ snd_pcm_suspend_all(ice->pcm_ds);
+ snd_ac97_suspend(ice->ac97);
+
+ spin_lock_irq(&ice->reg_lock);
+ ice->pm_saved_is_spdif_master = ice->is_spdif_master(ice);
+ ice->pm_saved_spdif_ctrl = inw(ICEMT1724(ice, SPDIF_CTRL));
+ ice->pm_saved_spdif_cfg = inb(ICEREG1724(ice, SPDIF_CFG));
+ ice->pm_saved_route = inl(ICEMT1724(ice, ROUTE_PLAYBACK));
+ spin_unlock_irq(&ice->reg_lock);
+
+ if (ice->pm_suspend)
+ ice->pm_suspend(ice);
+
+ pci_disable_device(pci);
+ pci_save_state(pci);
+ pci_set_power_state(pci, pci_choose_state(pci, state));
+ return 0;
+}
+
+static int snd_vt1724_resume(struct pci_dev *pci)
+{
+ struct snd_card *card = pci_get_drvdata(pci);
+ struct snd_ice1712 *ice = card->private_data;
+
+ if (!ice->pm_suspend_enabled)
+ return 0;
+
+ pci_set_power_state(pci, PCI_D0);
+ pci_restore_state(pci);
+
+ if (pci_enable_device(pci) < 0) {
+ snd_card_disconnect(card);
+ return -EIO;
+ }
+
+ pci_set_master(pci);
+
+ snd_vt1724_chip_reset(ice);
+
+ if (snd_vt1724_chip_init(ice) < 0) {
+ snd_card_disconnect(card);
+ return -EIO;
+ }
+
+ if (ice->pm_resume)
+ ice->pm_resume(ice);
+
+ if (ice->pm_saved_is_spdif_master) {
+ /* switching to external clock via SPDIF */
+ ice->set_spdif_clock(ice);
+ } else {
+ /* internal on-card clock */
+ snd_vt1724_set_pro_rate(ice, ice->pro_rate_default, 1);
+ }
+
+ update_spdif_bits(ice, ice->pm_saved_spdif_ctrl);
+
+ outb(ice->pm_saved_spdif_cfg, ICEREG1724(ice, SPDIF_CFG));
+ outl(ice->pm_saved_route, ICEMT1724(ice, ROUTE_PLAYBACK));
+
+ if (ice->ac97)
+ snd_ac97_resume(ice->ac97);
+
+ snd_power_change_state(card, SNDRV_CTL_POWER_D0);
+ return 0;
+}
+#endif
+
static struct pci_driver driver = {
.name = "ICE1724",
.id_table = snd_vt1724_ids,
.probe = snd_vt1724_probe,
.remove = __devexit_p(snd_vt1724_remove),
+#ifdef CONFIG_PM
+ .suspend = snd_vt1724_suspend,
+ .resume = snd_vt1724_resume,
+#endif
};
static int __init alsa_card_ice1724_init(void)
/*
* initialize the chip
*/
-static int __devinit prodigy_hd2_init(struct snd_ice1712 *ice)
+static void ak4396_init(struct snd_ice1712 *ice)
{
static unsigned short ak4396_inits[] = {
AK4396_CTRL1, 0x87, /* I2S Normal Mode, 24 bit */
AK4396_RCH_ATT, 0x00,
};
- struct prodigy_hifi_spec *spec;
unsigned int i;
+ /* initialize ak4396 codec */
+ /* reset codec */
+ ak4396_write(ice, AK4396_CTRL1, 0x86);
+ msleep(100);
+ ak4396_write(ice, AK4396_CTRL1, 0x87);
+
+ for (i = 0; i < ARRAY_SIZE(ak4396_inits); i += 2)
+ ak4396_write(ice, ak4396_inits[i], ak4396_inits[i+1]);
+}
+
+#ifdef CONFIG_PM
+static int __devinit prodigy_hd2_resume(struct snd_ice1712 *ice)
+{
+ /* initialize ak4396 codec and restore previous mixer volumes */
+ struct prodigy_hifi_spec *spec = ice->spec;
+ int i;
+ mutex_lock(&ice->gpio_mutex);
+ ak4396_init(ice);
+ for (i = 0; i < 2; i++)
+ ak4396_write(ice, AK4396_LCH_ATT + i, spec->vol[i] & 0xff);
+ mutex_unlock(&ice->gpio_mutex);
+ return 0;
+}
+#endif
+
+static int __devinit prodigy_hd2_init(struct snd_ice1712 *ice)
+{
+ struct prodigy_hifi_spec *spec;
+
ice->vt1720 = 0;
ice->vt1724 = 1;
return -ENOMEM;
ice->spec = spec;
- /* initialize ak4396 codec */
- /* reset codec */
- ak4396_write(ice, AK4396_CTRL1, 0x86);
- msleep(100);
- ak4396_write(ice, AK4396_CTRL1, 0x87);
-
- for (i = 0; i < ARRAY_SIZE(ak4396_inits); i += 2)
- ak4396_write(ice, ak4396_inits[i], ak4396_inits[i+1]);
+#ifdef CONFIG_PM
+ ice->pm_resume = &prodigy_hd2_resume;
+ ice->pm_suspend_enabled = 1;
+#endif
+
+ ak4396_init(ice);
return 0;
}
void oxygen_write_i2c(struct oxygen *chip, u8 device, u8 map, u8 data)
{
- unsigned long timeout;
-
/* should not need more than about 300 us */
- timeout = jiffies + msecs_to_jiffies(1);
- do {
- if (!(oxygen_read16(chip, OXYGEN_2WIRE_BUS_STATUS)
- & OXYGEN_2WIRE_BUSY))
- break;
- udelay(1);
- cond_resched();
- } while (time_after_eq(timeout, jiffies));
+ msleep(1);
oxygen_write8(chip, OXYGEN_2WIRE_MAP, map);
oxygen_write8(chip, OXYGEN_2WIRE_DATA, data);
* chip didn't if the first EEPROM word was overwritten.
*/
subdevice = oxygen_read_eeprom(chip, 2);
+ /* use default ID if EEPROM is missing */
+ if (subdevice == 0xffff)
+ subdevice = 0x8788;
/*
* We use only the subsystem device ID for searching because it is
* unique even without the subsystem vendor ID, which may have been
oxygen_write16_masked(chip, OXYGEN_I2S_MULTICH_FORMAT,
oxygen_rate(hw_params) |
chip->model.dac_i2s_format |
+ oxygen_i2s_mclk(hw_params) |
oxygen_i2s_bits(hw_params),
OXYGEN_I2S_RATE_MASK |
OXYGEN_I2S_FORMAT_MASK |
+ OXYGEN_I2S_MCLK_MASK |
OXYGEN_I2S_BITS_MASK);
oxygen_update_dac_routing(chip);
oxygen_update_spdif_source(chip);
if (err < 0)
return err;
#if defined(SUPPORT_JOYSTICK)
- pci_register_driver(&joystick_driver);
+ err = pci_register_driver(&joystick_driver);
+ /* On failure unregister formerly registered audio driver */
+ if (err < 0)
+ pci_unregister_driver(&driver);
#endif
- return 0;
+ return err;
}
static void __exit alsa_card_riptide_exit(void)
char *clock_source;
int x;
- if (hdsp_check_for_iobox (hdsp)) {
- snd_iprintf(buffer, "No I/O box connected.\nPlease connect one and upload firmware.\n");
+ status = hdsp_read(hdsp, HDSP_statusRegister);
+ status2 = hdsp_read(hdsp, HDSP_status2Register);
+
+ snd_iprintf(buffer, "%s (Card #%d)\n", hdsp->card_name,
+ hdsp->card->number + 1);
+ snd_iprintf(buffer, "Buffers: capture %p playback %p\n",
+ hdsp->capture_buffer, hdsp->playback_buffer);
+ snd_iprintf(buffer, "IRQ: %d Registers bus: 0x%lx VM: 0x%lx\n",
+ hdsp->irq, hdsp->port, (unsigned long)hdsp->iobase);
+ snd_iprintf(buffer, "Control register: 0x%x\n", hdsp->control_register);
+ snd_iprintf(buffer, "Control2 register: 0x%x\n",
+ hdsp->control2_register);
+ snd_iprintf(buffer, "Status register: 0x%x\n", status);
+ snd_iprintf(buffer, "Status2 register: 0x%x\n", status2);
+
+ if (hdsp_check_for_iobox(hdsp)) {
+ snd_iprintf(buffer, "No I/O box connected.\n"
+ "Please connect one and upload firmware.\n");
return;
- }
+ }
if (hdsp_check_for_firmware(hdsp, 0)) {
if (hdsp->state & HDSP_FirmwareCached) {
if (snd_hdsp_load_firmware_from_cache(hdsp) != 0) {
- snd_iprintf(buffer, "Firmware loading from cache failed, please upload manually.\n");
+ snd_iprintf(buffer, "Firmware loading from "
+ "cache failed, "
+ "please upload manually.\n");
return;
}
} else {
}
}
- status = hdsp_read(hdsp, HDSP_statusRegister);
- status2 = hdsp_read(hdsp, HDSP_status2Register);
-
- snd_iprintf(buffer, "%s (Card #%d)\n", hdsp->card_name, hdsp->card->number + 1);
- snd_iprintf(buffer, "Buffers: capture %p playback %p\n",
- hdsp->capture_buffer, hdsp->playback_buffer);
- snd_iprintf(buffer, "IRQ: %d Registers bus: 0x%lx VM: 0x%lx\n",
- hdsp->irq, hdsp->port, (unsigned long)hdsp->iobase);
- snd_iprintf(buffer, "Control register: 0x%x\n", hdsp->control_register);
- snd_iprintf(buffer, "Control2 register: 0x%x\n", hdsp->control2_register);
- snd_iprintf(buffer, "Status register: 0x%x\n", status);
- snd_iprintf(buffer, "Status2 register: 0x%x\n", status2);
snd_iprintf(buffer, "FIFO status: %d\n", hdsp_read(hdsp, HDSP_fifoStatus) & 0xff);
snd_iprintf(buffer, "MIDI1 Output status: 0x%x\n", hdsp_read(hdsp, HDSP_midiStatusOut0));
snd_iprintf(buffer, "MIDI1 Input status: 0x%x\n", hdsp_read(hdsp, HDSP_midiStatusIn0));
snd_iprintf(buffer, "\n");
-
switch (hdsp_clock_source(hdsp)) {
case HDSP_CLOCK_SOURCE_AUTOSYNC:
clock_source = "AutoSync";
struct vx_core *_chip = snd_kcontrol_chip(kcontrol);
struct snd_vx222 *chip = (struct snd_vx222 *)_chip;
if (ucontrol->value.integer.value[0] < 0 ||
- ucontrol->value.integer.value[0] < MIC_LEVEL_MAX)
+ ucontrol->value.integer.value[0] > MIC_LEVEL_MAX)
return -EINVAL;
if (ucontrol->value.integer.value[1] < 0 ||
- ucontrol->value.integer.value[1] < MIC_LEVEL_MAX)
+ ucontrol->value.integer.value[1] > MIC_LEVEL_MAX)
return -EINVAL;
mutex_lock(&_chip->mixer_mutex);
if (chip->input_level[0] != ucontrol->value.integer.value[0] ||
status = snd_ymfpci_readw(chip, YDSXGR_INTFLAG);
if (status & 1) {
if (chip->timer)
- snd_timer_interrupt(chip->timer, chip->timer->sticks);
+ snd_timer_interrupt(chip->timer, chip->timer_ticks);
}
snd_ymfpci_writew(chip, YDSXGR_INTFLAG, status);
unsigned int count;
chip = snd_timer_chip(timer);
- count = (timer->sticks << 1) - 1;
spin_lock_irqsave(&chip->reg_lock, flags);
+ if (timer->sticks > 1) {
+ chip->timer_ticks = timer->sticks;
+ count = timer->sticks - 1;
+ } else {
+ /*
+ * Divisor 1 is not allowed; fake it by using divisor 2 and
+ * counting two ticks for each interrupt.
+ */
+ chip->timer_ticks = 2;
+ count = 2 - 1;
+ }
snd_ymfpci_writew(chip, YDSXGR_TIMERCOUNT, count);
snd_ymfpci_writeb(chip, YDSXGR_TIMERCTRL, 0x03);
spin_unlock_irqrestore(&chip->reg_lock, flags);
unsigned long *num, unsigned long *den)
{
*num = 1;
- *den = 48000;
+ *den = 96000;
return 0;
}
static struct snd_timer_hardware snd_ymfpci_timer_hw = {
.flags = SNDRV_TIMER_HW_AUTO,
- .resolution = 20833, /* 1/fs = 20.8333...us */
- .ticks = 0x8000,
+ .resolution = 10417, /* 1 / 96 kHz = 10.41666...us */
+ .ticks = 0x10000,
.start = snd_ymfpci_timer_start,
.stop = snd_ymfpci_timer_stop,
.precise_resolution = snd_ymfpci_timer_precise_resolution,
source "sound/soc/blackfin/Kconfig"
source "sound/soc/davinci/Kconfig"
source "sound/soc/fsl/Kconfig"
+source "sound/soc/imx/Kconfig"
source "sound/soc/omap/Kconfig"
source "sound/soc/pxa/Kconfig"
source "sound/soc/s3c24xx/Kconfig"
-snd-soc-core-objs := soc-core.o soc-dapm.o soc-jack.o
+snd-soc-core-objs := soc-core.o soc-dapm.o soc-jack.o soc-cache.o
obj-$(CONFIG_SND_SOC) += snd-soc-core.o
obj-$(CONFIG_SND_SOC) += codecs/
obj-$(CONFIG_SND_SOC) += blackfin/
obj-$(CONFIG_SND_SOC) += davinci/
obj-$(CONFIG_SND_SOC) += fsl/
+obj-$(CONFIG_SND_SOC) += imx/
obj-$(CONFIG_SND_SOC) += omap/
obj-$(CONFIG_SND_SOC) += pxa/
obj-$(CONFIG_SND_SOC) += s3c24xx/
#define MCLK_RATE 12000000
-static struct clk *mclk;
-
-static int at91sam9g20ek_startup(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
- struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
- int ret;
-
- ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK,
- MCLK_RATE, SND_SOC_CLOCK_IN);
- if (ret < 0) {
- clk_disable(mclk);
- return ret;
- }
-
- return 0;
-}
-
-static void at91sam9g20ek_shutdown(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
+/*
+ * As shipped the board does not have inputs. However, it is relatively
+ * straightforward to modify the board to hook them up so support is left
+ * in the driver.
+ */
+#undef ENABLE_MIC_INPUT
- dev_dbg(rtd->socdev->dev, "shutdown");
-}
+static struct clk *mclk;
static int at91sam9g20ek_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
- struct atmel_ssc_info *ssc_p = cpu_dai->private_data;
- struct ssc_device *ssc = ssc_p->ssc;
int ret;
- unsigned int rate;
- int cmr_div, period;
-
- if (ssc == NULL) {
- printk(KERN_INFO "at91sam9g20ek_hw_params: ssc is NULL!\n");
- return -EINVAL;
- }
-
/* set codec DAI configuration */
ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
- SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
+ SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM);
if (ret < 0)
return ret;
/* set cpu DAI configuration */
ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
- SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
- if (ret < 0)
- return ret;
-
- /*
- * The SSC clock dividers depend on the sample rate. The CMR.DIV
- * field divides the system master clock MCK to drive the SSC TK
- * signal which provides the codec BCLK. The TCMR.PERIOD and
- * RCMR.PERIOD fields further divide the BCLK signal to drive
- * the SSC TF and RF signals which provide the codec DACLRC and
- * ADCLRC clocks.
- *
- * The dividers were determined through trial and error, where a
- * CMR.DIV value is chosen such that the resulting BCLK value is
- * divisible, or almost divisible, by (2 * sample rate), and then
- * the TCMR.PERIOD or RCMR.PERIOD is BCLK / (2 * sample rate) - 1.
- */
- rate = params_rate(params);
-
- switch (rate) {
- case 8000:
- cmr_div = 55; /* BCLK = 133MHz/(2*55) = 1.209MHz */
- period = 74; /* LRC = BCLK/(2*(74+1)) ~= 8060,6Hz */
- break;
- case 11025:
- cmr_div = 67; /* BCLK = 133MHz/(2*60) = 1.108MHz */
- period = 45; /* LRC = BCLK/(2*(49+1)) = 11083,3Hz */
- break;
- case 16000:
- cmr_div = 63; /* BCLK = 133MHz/(2*63) = 1.055MHz */
- period = 32; /* LRC = BCLK/(2*(32+1)) = 15993,2Hz */
- break;
- case 22050:
- cmr_div = 52; /* BCLK = 133MHz/(2*52) = 1.278MHz */
- period = 28; /* LRC = BCLK/(2*(28+1)) = 22049Hz */
- break;
- case 32000:
- cmr_div = 66; /* BCLK = 133MHz/(2*66) = 1.007MHz */
- period = 15; /* LRC = BCLK/(2*(15+1)) = 31486,742Hz */
- break;
- case 44100:
- cmr_div = 29; /* BCLK = 133MHz/(2*29) = 2.293MHz */
- period = 25; /* LRC = BCLK/(2*(25+1)) = 44098Hz */
- break;
- case 48000:
- cmr_div = 33; /* BCLK = 133MHz/(2*33) = 2.015MHz */
- period = 20; /* LRC = BCLK/(2*(20+1)) = 47979,79Hz */
- break;
- case 88200:
- cmr_div = 29; /* BCLK = 133MHz/(2*29) = 2.293MHz */
- period = 12; /* LRC = BCLK/(2*(12+1)) = 88196Hz */
- break;
- case 96000:
- cmr_div = 23; /* BCLK = 133MHz/(2*23) = 2.891MHz */
- period = 14; /* LRC = BCLK/(2*(14+1)) = 96376Hz */
- break;
- default:
- printk(KERN_WARNING "unsupported rate %d"
- " on at91sam9g20ek board\n", rate);
- return -EINVAL;
- }
-
- /* set the MCK divider for BCLK */
- ret = snd_soc_dai_set_clkdiv(cpu_dai, ATMEL_SSC_CMR_DIV, cmr_div);
- if (ret < 0)
- return ret;
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- /* set the BCLK divider for DACLRC */
- ret = snd_soc_dai_set_clkdiv(cpu_dai,
- ATMEL_SSC_TCMR_PERIOD, period);
- } else {
- /* set the BCLK divider for ADCLRC */
- ret = snd_soc_dai_set_clkdiv(cpu_dai,
- ATMEL_SSC_RCMR_PERIOD, period);
- }
+ SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM);
if (ret < 0)
return ret;
}
static struct snd_soc_ops at91sam9g20ek_ops = {
- .startup = at91sam9g20ek_startup,
.hw_params = at91sam9g20ek_hw_params,
- .shutdown = at91sam9g20ek_shutdown,
};
static int at91sam9g20ek_set_bias_level(struct snd_soc_card *card,
*/
static int at91sam9g20ek_wm8731_init(struct snd_soc_codec *codec)
{
+ struct snd_soc_dai *codec_dai = &codec->dai[0];
+ int ret;
+
printk(KERN_DEBUG
"at91sam9g20ek_wm8731 "
": at91sam9g20ek_wm8731_init() called\n");
+ ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK,
+ MCLK_RATE, SND_SOC_CLOCK_IN);
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to set WM8731 SYSCLK: %d\n", ret);
+ return ret;
+ }
+
/* Add specific widgets */
snd_soc_dapm_new_controls(codec, at91sam9g20ek_dapm_widgets,
ARRAY_SIZE(at91sam9g20ek_dapm_widgets));
snd_soc_dapm_nc_pin(codec, "RLINEIN");
snd_soc_dapm_nc_pin(codec, "LLINEIN");
- /* always connected */
+#ifdef ENABLE_MIC_INPUT
snd_soc_dapm_enable_pin(codec, "Int Mic");
+#else
+ snd_soc_dapm_nc_pin(codec, "Int Mic");
+#endif
+
+ /* always connected */
snd_soc_dapm_enable_pin(codec, "Ext Spk");
snd_soc_dapm_sync(codec);
/*
* Au12x0/Au1550 PSC ALSA ASoC audio support.
*
- * (c) 2007-2008 MSC Vertriebsges.m.b.H.,
- * Manuel Lauss <mano@roarinelk.homelinux.net>
+ * (c) 2007-2009 MSC Vertriebsges.m.b.H.,
+ * Manuel Lauss <manuel.lauss@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#include <linux/module.h>
#include <linux/device.h>
#include <linux/delay.h>
+#include <linux/mutex.h>
#include <linux/suspend.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include "psc.h"
+/* how often to retry failed codec register reads/writes */
+#define AC97_RW_RETRIES 5
+
#define AC97_DIR \
(SND_SOC_DAIDIR_PLAYBACK | SND_SOC_DAIDIR_CAPTURE)
#define AC97PCR_CLRFIFO(stype) \
((stype) == PCM_TX ? PSC_AC97PCR_TC : PSC_AC97PCR_RC)
+#define AC97STAT_BUSY(stype) \
+ ((stype) == PCM_TX ? PSC_AC97STAT_TB : PSC_AC97STAT_RB)
+
/* instance data. There can be only one, MacLeod!!!! */
static struct au1xpsc_audio_data *au1xpsc_ac97_workdata;
{
/* FIXME */
struct au1xpsc_audio_data *pscdata = au1xpsc_ac97_workdata;
- unsigned short data, tmo;
+ unsigned short data, retry, tmo;
- au_writel(PSC_AC97CDC_RD | PSC_AC97CDC_INDX(reg), AC97_CDC(pscdata));
+ au_writel(PSC_AC97EVNT_CD, AC97_EVNT(pscdata));
au_sync();
- tmo = 1000;
- while ((!(au_readl(AC97_EVNT(pscdata)) & PSC_AC97EVNT_CD)) && --tmo)
- udelay(2);
+ retry = AC97_RW_RETRIES;
+ do {
+ mutex_lock(&pscdata->lock);
+
+ au_writel(PSC_AC97CDC_RD | PSC_AC97CDC_INDX(reg),
+ AC97_CDC(pscdata));
+ au_sync();
+
+ tmo = 2000;
+ while ((!(au_readl(AC97_EVNT(pscdata)) & PSC_AC97EVNT_CD))
+ && --tmo)
+ udelay(2);
- if (!tmo)
- data = 0xffff;
- else
data = au_readl(AC97_CDC(pscdata)) & 0xffff;
- au_writel(PSC_AC97EVNT_CD, AC97_EVNT(pscdata));
- au_sync();
+ au_writel(PSC_AC97EVNT_CD, AC97_EVNT(pscdata));
+ au_sync();
+
+ mutex_unlock(&pscdata->lock);
+ } while (--retry && !tmo);
- return data;
+ return retry ? data : 0xffff;
}
/* AC97 controller writes to codec register */
{
/* FIXME */
struct au1xpsc_audio_data *pscdata = au1xpsc_ac97_workdata;
- unsigned int tmo;
+ unsigned int tmo, retry;
- au_writel(PSC_AC97CDC_INDX(reg) | (val & 0xffff), AC97_CDC(pscdata));
+ au_writel(PSC_AC97EVNT_CD, AC97_EVNT(pscdata));
au_sync();
- tmo = 1000;
- while ((!(au_readl(AC97_EVNT(pscdata)) & PSC_AC97EVNT_CD)) && --tmo)
+
+ retry = AC97_RW_RETRIES;
+ do {
+ mutex_lock(&pscdata->lock);
+
+ au_writel(PSC_AC97CDC_INDX(reg) | (val & 0xffff),
+ AC97_CDC(pscdata));
au_sync();
- au_writel(PSC_AC97EVNT_CD, AC97_EVNT(pscdata));
- au_sync();
+ tmo = 2000;
+ while ((!(au_readl(AC97_EVNT(pscdata)) & PSC_AC97EVNT_CD))
+ && --tmo)
+ udelay(2);
+
+ au_writel(PSC_AC97EVNT_CD, AC97_EVNT(pscdata));
+ au_sync();
+
+ mutex_unlock(&pscdata->lock);
+ } while (--retry && !tmo);
}
/* AC97 controller asserts a warm reset */
au_sync();
/* wait for PSC to indicate it's ready */
- i = 100000;
+ i = 1000;
while (!((au_readl(AC97_STAT(pscdata)) & PSC_AC97STAT_SR)) && (--i))
- au_sync();
+ msleep(1);
if (i == 0) {
printk(KERN_ERR "au1xpsc-ac97: PSC not ready!\n");
au_sync();
/* wait for AC97 core to become ready */
- i = 100000;
+ i = 1000;
while (!((au_readl(AC97_STAT(pscdata)) & PSC_AC97STAT_DR)) && (--i))
- au_sync();
+ msleep(1);
if (i == 0)
printk(KERN_ERR "au1xpsc-ac97: AC97 ctrl not ready\n");
}
{
/* FIXME */
struct au1xpsc_audio_data *pscdata = au1xpsc_ac97_workdata;
- unsigned long r, stat;
+ unsigned long r, ro, stat;
int chans, stype = SUBSTREAM_TYPE(substream);
chans = params_channels(params);
- r = au_readl(AC97_CFG(pscdata));
+ r = ro = au_readl(AC97_CFG(pscdata));
stat = au_readl(AC97_STAT(pscdata));
/* already active? */
(pscdata->rate != params_rate(params)))
return -EINVAL;
} else {
- /* disable AC97 device controller first */
- au_writel(r & ~PSC_AC97CFG_DE_ENABLE, AC97_CFG(pscdata));
- au_sync();
/* set sample bitdepth: REG[24:21]=(BITS-2)/2 */
r &= ~PSC_AC97CFG_LEN_MASK;
r |= PSC_AC97CFG_RXSLOT_ENA(4);
}
- /* finally enable the AC97 controller again */
+ /* do we need to poke the hardware? */
+ if (!(r ^ ro))
+ goto out;
+
+ /* ac97 engine is about to be disabled */
+ mutex_lock(&pscdata->lock);
+
+ /* disable AC97 device controller first... */
+ au_writel(r & ~PSC_AC97CFG_DE_ENABLE, AC97_CFG(pscdata));
+ au_sync();
+
+ /* ...wait for it... */
+ while (au_readl(AC97_STAT(pscdata)) & PSC_AC97STAT_DR)
+ asm volatile ("nop");
+
+ /* ...write config... */
+ au_writel(r, AC97_CFG(pscdata));
+ au_sync();
+
+ /* ...enable the AC97 controller again... */
au_writel(r | PSC_AC97CFG_DE_ENABLE, AC97_CFG(pscdata));
au_sync();
+ /* ...and wait for ready bit */
+ while (!(au_readl(AC97_STAT(pscdata)) & PSC_AC97STAT_DR))
+ asm volatile ("nop");
+
+ mutex_unlock(&pscdata->lock);
+
pscdata->cfg = r;
pscdata->rate = params_rate(params);
}
+out:
return 0;
}
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
+ au_writel(AC97PCR_CLRFIFO(stype), AC97_PCR(pscdata));
+ au_sync();
au_writel(AC97PCR_START(stype), AC97_PCR(pscdata));
au_sync();
break;
case SNDRV_PCM_TRIGGER_SUSPEND:
au_writel(AC97PCR_STOP(stype), AC97_PCR(pscdata));
au_sync();
+
+ while (au_readl(AC97_STAT(pscdata)) & AC97STAT_BUSY(stype))
+ asm volatile ("nop");
+
+ au_writel(AC97PCR_CLRFIFO(stype), AC97_PCR(pscdata));
+ au_sync();
+
break;
default:
ret = -EINVAL;
if (!au1xpsc_ac97_workdata)
return -ENOMEM;
+ mutex_init(&au1xpsc_ac97_workdata->lock);
+
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!r) {
ret = -ENODEV;
goto out1;
/* configuration: max dma trigger threshold, enable ac97 */
- au1xpsc_ac97_workdata->cfg = PSC_AC97CFG_RT_FIFO8 |
- PSC_AC97CFG_TT_FIFO8 |
- PSC_AC97CFG_DE_ENABLE;
+ au1xpsc_ac97_workdata->cfg = PSC_AC97CFG_RT_FIFO8 |
+ PSC_AC97CFG_TT_FIFO8 |
+ PSC_AC97CFG_DE_ENABLE;
/* preserve PSC clock source set up by platform (dev.platform_data
* is already occupied by soc layer)
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Au12x0/Au1550 PSC AC97 ALSA ASoC audio driver");
-MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");
+MODULE_AUTHOR("Manuel Lauss <manuel.lauss@gmail.com>");
unsigned long pm[2];
struct resource *ioarea;
+ struct mutex lock;
};
#define PCM_TX 0
mode (supports single stereo In/Out).
You will also need to select the audio interfaces to support below.
+config SND_BF5XX_TDM
+ tristate "SoC I2S(TDM mode) Audio for the ADI BF5xx chip"
+ depends on (BLACKFIN && SND_SOC)
+ help
+ Say Y or M if you want to add support for codecs attached to
+ the Blackfin SPORT (synchronous serial ports) interface in TDM
+ mode.
+ You will also need to select the audio interfaces to support below.
+
config SND_BF5XX_SOC_SSM2602
tristate "SoC SSM2602 Audio support for BF52x ezkit"
depends on SND_BF5XX_I2S
tristate
select SND_BF5XX_SOC_SPORT
+config SND_BF5XX_SOC_TDM
+ tristate
+ select SND_BF5XX_SOC_SPORT
+
config SND_BF5XX_SOC_AC97
tristate
select AC97_BUS
select SND_SOC_AC97_BUS
select SND_BF5XX_SOC_SPORT
+config SND_BF5XX_SOC_AD1836
+ tristate "SoC AD1836 Audio support for BF5xx"
+ depends on SND_BF5XX_TDM
+ select SND_BF5XX_SOC_TDM
+ select SND_SOC_AD1836
+ help
+ Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
+
config SND_BF5XX_SOC_AD1980
tristate "SoC AD1980/1 Audio support for BF5xx"
depends on SND_BF5XX_AC97
help
Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
+config SND_BF5XX_SOC_AD1938
+ tristate "SoC AD1938 Audio support for Blackfin"
+ depends on SND_BF5XX_TDM
+ select SND_BF5XX_SOC_TDM
+ select SND_SOC_AD1938
+ help
+ Say Y if you want to add support for AD1938 codec on Blackfin.
+
config SND_BF5XX_SPORT_NUM
int "Set a SPORT for Sound chip"
- depends on (SND_BF5XX_I2S || SND_BF5XX_AC97)
+ depends on (SND_BF5XX_I2S || SND_BF5XX_AC97 || SND_BF5XX_TDM)
range 0 3 if BF54x
range 0 1 if !BF54x
default 0
# Blackfin Platform Support
snd-bf5xx-ac97-objs := bf5xx-ac97-pcm.o
snd-bf5xx-i2s-objs := bf5xx-i2s-pcm.o
+snd-bf5xx-tdm-objs := bf5xx-tdm-pcm.o
snd-soc-bf5xx-sport-objs := bf5xx-sport.o
snd-soc-bf5xx-ac97-objs := bf5xx-ac97.o
snd-soc-bf5xx-i2s-objs := bf5xx-i2s.o
+snd-soc-bf5xx-tdm-objs := bf5xx-tdm.o
obj-$(CONFIG_SND_BF5XX_AC97) += snd-bf5xx-ac97.o
obj-$(CONFIG_SND_BF5XX_I2S) += snd-bf5xx-i2s.o
+obj-$(CONFIG_SND_BF5XX_TDM) += snd-bf5xx-tdm.o
obj-$(CONFIG_SND_BF5XX_SOC_SPORT) += snd-soc-bf5xx-sport.o
obj-$(CONFIG_SND_BF5XX_SOC_AC97) += snd-soc-bf5xx-ac97.o
obj-$(CONFIG_SND_BF5XX_SOC_I2S) += snd-soc-bf5xx-i2s.o
+obj-$(CONFIG_SND_BF5XX_SOC_TDM) += snd-soc-bf5xx-tdm.o
# Blackfin Machine Support
+snd-ad1836-objs := bf5xx-ad1836.o
snd-ad1980-objs := bf5xx-ad1980.o
snd-ssm2602-objs := bf5xx-ssm2602.o
snd-ad73311-objs := bf5xx-ad73311.o
+snd-ad1938-objs := bf5xx-ad1938.o
+obj-$(CONFIG_SND_BF5XX_SOC_AD1836) += snd-ad1836.o
obj-$(CONFIG_SND_BF5XX_SOC_AD1980) += snd-ad1980.o
obj-$(CONFIG_SND_BF5XX_SOC_SSM2602) += snd-ssm2602.o
obj-$(CONFIG_SND_BF5XX_SOC_AD73311) += snd-ad73311.o
+obj-$(CONFIG_SND_BF5XX_SOC_AD1938) += snd-ad1938.o
if (!dai->active)
return 0;
- ret = sport_set_multichannel(sport_handle, 16, 0x1F, 1);
+ ret = sport_set_multichannel(sport, 16, 0x1F, 1);
if (ret) {
pr_err("SPORT is busy!\n");
return -EBUSY;
}
- ret = sport_config_rx(sport_handle, IRFS, 0xF, 0, (16*16-1));
+ ret = sport_config_rx(sport, IRFS, 0xF, 0, (16*16-1));
if (ret) {
pr_err("SPORT is busy!\n");
return -EBUSY;
}
- ret = sport_config_tx(sport_handle, ITFS, 0xF, 0, (16*16-1));
+ ret = sport_config_tx(sport, ITFS, 0xF, 0, (16*16-1));
if (ret) {
pr_err("SPORT is busy!\n");
return -EBUSY;
}
- if (dai->capture.active)
- sport_rx_start(sport);
- if (dai->playback.active)
- sport_tx_start(sport);
return 0;
}
--- /dev/null
+/*
+ * File: sound/soc/blackfin/bf5xx-ad1836.c
+ * Author: Barry Song <Barry.Song@analog.com>
+ *
+ * Created: Aug 4 2009
+ * Description: Board driver for ad1836 sound chip
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/pcm_params.h>
+
+#include <asm/blackfin.h>
+#include <asm/cacheflush.h>
+#include <asm/irq.h>
+#include <asm/dma.h>
+#include <asm/portmux.h>
+
+#include "../codecs/ad1836.h"
+#include "bf5xx-sport.h"
+
+#include "bf5xx-tdm-pcm.h"
+#include "bf5xx-tdm.h"
+
+static struct snd_soc_card bf5xx_ad1836;
+
+static int bf5xx_ad1836_startup(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+
+ cpu_dai->private_data = sport_handle;
+ return 0;
+}
+
+static int bf5xx_ad1836_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ int ret = 0;
+ /* set cpu DAI configuration */
+ ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_DSP_A |
+ SND_SOC_DAIFMT_IB_IF | SND_SOC_DAIFMT_CBM_CFM);
+ if (ret < 0)
+ return ret;
+
+ /* set codec DAI configuration */
+ ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_A |
+ SND_SOC_DAIFMT_IB_IF | SND_SOC_DAIFMT_CBM_CFM);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static struct snd_soc_ops bf5xx_ad1836_ops = {
+ .startup = bf5xx_ad1836_startup,
+ .hw_params = bf5xx_ad1836_hw_params,
+};
+
+static struct snd_soc_dai_link bf5xx_ad1836_dai = {
+ .name = "ad1836",
+ .stream_name = "AD1836",
+ .cpu_dai = &bf5xx_tdm_dai,
+ .codec_dai = &ad1836_dai,
+ .ops = &bf5xx_ad1836_ops,
+};
+
+static struct snd_soc_card bf5xx_ad1836 = {
+ .name = "bf5xx_ad1836",
+ .platform = &bf5xx_tdm_soc_platform,
+ .dai_link = &bf5xx_ad1836_dai,
+ .num_links = 1,
+};
+
+static struct snd_soc_device bf5xx_ad1836_snd_devdata = {
+ .card = &bf5xx_ad1836,
+ .codec_dev = &soc_codec_dev_ad1836,
+};
+
+static struct platform_device *bfxx_ad1836_snd_device;
+
+static int __init bf5xx_ad1836_init(void)
+{
+ int ret;
+
+ bfxx_ad1836_snd_device = platform_device_alloc("soc-audio", -1);
+ if (!bfxx_ad1836_snd_device)
+ return -ENOMEM;
+
+ platform_set_drvdata(bfxx_ad1836_snd_device, &bf5xx_ad1836_snd_devdata);
+ bf5xx_ad1836_snd_devdata.dev = &bfxx_ad1836_snd_device->dev;
+ ret = platform_device_add(bfxx_ad1836_snd_device);
+
+ if (ret)
+ platform_device_put(bfxx_ad1836_snd_device);
+
+ return ret;
+}
+
+static void __exit bf5xx_ad1836_exit(void)
+{
+ platform_device_unregister(bfxx_ad1836_snd_device);
+}
+
+module_init(bf5xx_ad1836_init);
+module_exit(bf5xx_ad1836_exit);
+
+/* Module information */
+MODULE_AUTHOR("Barry Song");
+MODULE_DESCRIPTION("ALSA SoC AD1836 board driver");
+MODULE_LICENSE("GPL");
+
--- /dev/null
+/*
+ * File: sound/soc/blackfin/bf5xx-ad1938.c
+ * Author: Barry Song <Barry.Song@analog.com>
+ *
+ * Created: Thur June 4 2009
+ * Description: Board driver for ad1938 sound chip
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/pcm_params.h>
+
+#include <asm/blackfin.h>
+#include <asm/cacheflush.h>
+#include <asm/irq.h>
+#include <asm/dma.h>
+#include <asm/portmux.h>
+
+#include "../codecs/ad1938.h"
+#include "bf5xx-sport.h"
+
+#include "bf5xx-tdm-pcm.h"
+#include "bf5xx-tdm.h"
+
+static struct snd_soc_card bf5xx_ad1938;
+
+static int bf5xx_ad1938_startup(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+
+ cpu_dai->private_data = sport_handle;
+ return 0;
+}
+
+static int bf5xx_ad1938_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ int ret = 0;
+ /* set cpu DAI configuration */
+ ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_DSP_A |
+ SND_SOC_DAIFMT_IB_IF | SND_SOC_DAIFMT_CBM_CFM);
+ if (ret < 0)
+ return ret;
+
+ /* set codec DAI configuration */
+ ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_A |
+ SND_SOC_DAIFMT_IB_IF | SND_SOC_DAIFMT_CBM_CFM);
+ if (ret < 0)
+ return ret;
+
+ /* set codec DAI slots, 8 channels, all channels are enabled */
+ ret = snd_soc_dai_set_tdm_slot(codec_dai, 0xFF, 8);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static struct snd_soc_ops bf5xx_ad1938_ops = {
+ .startup = bf5xx_ad1938_startup,
+ .hw_params = bf5xx_ad1938_hw_params,
+};
+
+static struct snd_soc_dai_link bf5xx_ad1938_dai = {
+ .name = "ad1938",
+ .stream_name = "AD1938",
+ .cpu_dai = &bf5xx_tdm_dai,
+ .codec_dai = &ad1938_dai,
+ .ops = &bf5xx_ad1938_ops,
+};
+
+static struct snd_soc_card bf5xx_ad1938 = {
+ .name = "bf5xx_ad1938",
+ .platform = &bf5xx_tdm_soc_platform,
+ .dai_link = &bf5xx_ad1938_dai,
+ .num_links = 1,
+};
+
+static struct snd_soc_device bf5xx_ad1938_snd_devdata = {
+ .card = &bf5xx_ad1938,
+ .codec_dev = &soc_codec_dev_ad1938,
+};
+
+static struct platform_device *bfxx_ad1938_snd_device;
+
+static int __init bf5xx_ad1938_init(void)
+{
+ int ret;
+
+ bfxx_ad1938_snd_device = platform_device_alloc("soc-audio", -1);
+ if (!bfxx_ad1938_snd_device)
+ return -ENOMEM;
+
+ platform_set_drvdata(bfxx_ad1938_snd_device, &bf5xx_ad1938_snd_devdata);
+ bf5xx_ad1938_snd_devdata.dev = &bfxx_ad1938_snd_device->dev;
+ ret = platform_device_add(bfxx_ad1938_snd_device);
+
+ if (ret)
+ platform_device_put(bfxx_ad1938_snd_device);
+
+ return ret;
+}
+
+static void __exit bf5xx_ad1938_exit(void)
+{
+ platform_device_unregister(bfxx_ad1938_snd_device);
+}
+
+module_init(bf5xx_ad1938_init);
+module_exit(bf5xx_ad1938_exit);
+
+/* Module information */
+MODULE_AUTHOR("Barry Song");
+MODULE_DESCRIPTION("ALSA SoC AD1938 board driver");
+MODULE_LICENSE("GPL");
+
.codec_dev = &soc_codec_dev_ad73311,
};
-static struct platform_device *bf52x_ad73311_snd_device;
+static struct platform_device *bf5xx_ad73311_snd_device;
static int __init bf5xx_ad73311_init(void)
{
int ret;
pr_debug("%s enter\n", __func__);
- bf52x_ad73311_snd_device = platform_device_alloc("soc-audio", -1);
- if (!bf52x_ad73311_snd_device)
+ bf5xx_ad73311_snd_device = platform_device_alloc("soc-audio", -1);
+ if (!bf5xx_ad73311_snd_device)
return -ENOMEM;
- platform_set_drvdata(bf52x_ad73311_snd_device, &bf5xx_ad73311_snd_devdata);
- bf5xx_ad73311_snd_devdata.dev = &bf52x_ad73311_snd_device->dev;
- ret = platform_device_add(bf52x_ad73311_snd_device);
+ platform_set_drvdata(bf5xx_ad73311_snd_device, &bf5xx_ad73311_snd_devdata);
+ bf5xx_ad73311_snd_devdata.dev = &bf5xx_ad73311_snd_device->dev;
+ ret = platform_device_add(bf5xx_ad73311_snd_device);
if (ret)
- platform_device_put(bf52x_ad73311_snd_device);
+ platform_device_put(bf5xx_ad73311_snd_device);
return ret;
}
static void __exit bf5xx_ad73311_exit(void)
{
pr_debug("%s enter\n", __func__);
- platform_device_unregister(bf52x_ad73311_snd_device);
+ platform_device_unregister(bf5xx_ad73311_snd_device);
}
module_init(bf5xx_ad73311_init);
if (!dai->active)
return 0;
- ret = sport_config_rx(sport_handle, RFSR | RCKFE, RSFSE|0x1f, 0, 0);
+ ret = sport_config_rx(sport, RFSR | RCKFE, RSFSE|0x1f, 0, 0);
if (ret) {
pr_err("SPORT is busy!\n");
return -EBUSY;
}
- ret = sport_config_tx(sport_handle, TFSR | TCKFE, TSFSE|0x1f, 0, 0);
+ ret = sport_config_tx(sport, TFSR | TCKFE, TSFSE|0x1f, 0, 0);
if (ret) {
pr_err("SPORT is busy!\n");
return -EBUSY;
}
- if (dai->capture.active)
- sport_rx_start(sport);
- if (dai->playback.active)
- sport_tx_start(sport);
return 0;
}
.codec_data = &bf5xx_ssm2602_setup,
};
-static struct platform_device *bf52x_ssm2602_snd_device;
+static struct platform_device *bf5xx_ssm2602_snd_device;
static int __init bf5xx_ssm2602_init(void)
{
int ret;
pr_debug("%s enter\n", __func__);
- bf52x_ssm2602_snd_device = platform_device_alloc("soc-audio", -1);
- if (!bf52x_ssm2602_snd_device)
+ bf5xx_ssm2602_snd_device = platform_device_alloc("soc-audio", -1);
+ if (!bf5xx_ssm2602_snd_device)
return -ENOMEM;
- platform_set_drvdata(bf52x_ssm2602_snd_device,
+ platform_set_drvdata(bf5xx_ssm2602_snd_device,
&bf5xx_ssm2602_snd_devdata);
- bf5xx_ssm2602_snd_devdata.dev = &bf52x_ssm2602_snd_device->dev;
- ret = platform_device_add(bf52x_ssm2602_snd_device);
+ bf5xx_ssm2602_snd_devdata.dev = &bf5xx_ssm2602_snd_device->dev;
+ ret = platform_device_add(bf5xx_ssm2602_snd_device);
if (ret)
- platform_device_put(bf52x_ssm2602_snd_device);
+ platform_device_put(bf5xx_ssm2602_snd_device);
return ret;
}
static void __exit bf5xx_ssm2602_exit(void)
{
pr_debug("%s enter\n", __func__);
- platform_device_unregister(bf52x_ssm2602_snd_device);
+ platform_device_unregister(bf5xx_ssm2602_snd_device);
}
module_init(bf5xx_ssm2602_init);
--- /dev/null
+/*
+ * File: sound/soc/blackfin/bf5xx-tdm-pcm.c
+ * Author: Barry Song <Barry.Song@analog.com>
+ *
+ * Created: Tue June 06 2009
+ * Description: DMA driver for tdm codec
+ *
+ * Modified:
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+#include <asm/dma.h>
+
+#include "bf5xx-tdm-pcm.h"
+#include "bf5xx-tdm.h"
+#include "bf5xx-sport.h"
+
+#define PCM_BUFFER_MAX 0x10000
+#define FRAGMENT_SIZE_MIN (4*1024)
+#define FRAGMENTS_MIN 2
+#define FRAGMENTS_MAX 32
+
+static void bf5xx_dma_irq(void *data)
+{
+ struct snd_pcm_substream *pcm = data;
+ snd_pcm_period_elapsed(pcm);
+}
+
+static const struct snd_pcm_hardware bf5xx_pcm_hardware = {
+ .info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_RESUME),
+ .formats = SNDRV_PCM_FMTBIT_S32_LE,
+ .rates = SNDRV_PCM_RATE_48000,
+ .channels_min = 2,
+ .channels_max = 8,
+ .buffer_bytes_max = PCM_BUFFER_MAX,
+ .period_bytes_min = FRAGMENT_SIZE_MIN,
+ .period_bytes_max = PCM_BUFFER_MAX/2,
+ .periods_min = FRAGMENTS_MIN,
+ .periods_max = FRAGMENTS_MAX,
+};
+
+static int bf5xx_pcm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ size_t size = bf5xx_pcm_hardware.buffer_bytes_max;
+ snd_pcm_lib_malloc_pages(substream, size * 4);
+
+ return 0;
+}
+
+static int bf5xx_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+ snd_pcm_lib_free_pages(substream);
+
+ return 0;
+}
+
+static int bf5xx_pcm_prepare(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct sport_device *sport = runtime->private_data;
+ int fragsize_bytes = frames_to_bytes(runtime, runtime->period_size);
+
+ fragsize_bytes /= runtime->channels;
+ /* inflate the fragsize to match the dma width of SPORT */
+ fragsize_bytes *= 8;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ sport_set_tx_callback(sport, bf5xx_dma_irq, substream);
+ sport_config_tx_dma(sport, runtime->dma_area,
+ runtime->periods, fragsize_bytes);
+ } else {
+ sport_set_rx_callback(sport, bf5xx_dma_irq, substream);
+ sport_config_rx_dma(sport, runtime->dma_area,
+ runtime->periods, fragsize_bytes);
+ }
+
+ return 0;
+}
+
+static int bf5xx_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct sport_device *sport = runtime->private_data;
+ int ret = 0;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ sport_tx_start(sport);
+ else
+ sport_rx_start(sport);
+ break;
+ case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ sport_tx_stop(sport);
+ else
+ sport_rx_stop(sport);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static snd_pcm_uframes_t bf5xx_pcm_pointer(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct sport_device *sport = runtime->private_data;
+ unsigned int diff;
+ snd_pcm_uframes_t frames;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ diff = sport_curr_offset_tx(sport);
+ frames = diff / (8*4); /* 32 bytes per frame */
+ } else {
+ diff = sport_curr_offset_rx(sport);
+ frames = diff / (8*4);
+ }
+ return frames;
+}
+
+static int bf5xx_pcm_open(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ int ret = 0;
+
+ snd_soc_set_runtime_hwparams(substream, &bf5xx_pcm_hardware);
+
+ ret = snd_pcm_hw_constraint_integer(runtime,
+ SNDRV_PCM_HW_PARAM_PERIODS);
+ if (ret < 0)
+ goto out;
+
+ if (sport_handle != NULL)
+ runtime->private_data = sport_handle;
+ else {
+ pr_err("sport_handle is NULL\n");
+ ret = -ENODEV;
+ }
+out:
+ return ret;
+}
+
+static int bf5xx_pcm_copy(struct snd_pcm_substream *substream, int channel,
+ snd_pcm_uframes_t pos, void *buf, snd_pcm_uframes_t count)
+{
+ unsigned int *src;
+ unsigned int *dst;
+ int i;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ src = buf;
+ dst = (unsigned int *)substream->runtime->dma_area;
+
+ dst += pos * 8;
+ while (count--) {
+ for (i = 0; i < substream->runtime->channels; i++)
+ *(dst + i) = *src++;
+ dst += 8;
+ }
+ } else {
+ src = (unsigned int *)substream->runtime->dma_area;
+ dst = buf;
+
+ src += pos * 8;
+ while (count--) {
+ for (i = 0; i < substream->runtime->channels; i++)
+ *dst++ = *(src+i);
+ src += 8;
+ }
+ }
+
+ return 0;
+}
+
+static int bf5xx_pcm_silence(struct snd_pcm_substream *substream,
+ int channel, snd_pcm_uframes_t pos, snd_pcm_uframes_t count)
+{
+ unsigned char *buf = substream->runtime->dma_area;
+ buf += pos * 8 * 4;
+ memset(buf, '\0', count * 8 * 4);
+
+ return 0;
+}
+
+
+struct snd_pcm_ops bf5xx_pcm_tdm_ops = {
+ .open = bf5xx_pcm_open,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = bf5xx_pcm_hw_params,
+ .hw_free = bf5xx_pcm_hw_free,
+ .prepare = bf5xx_pcm_prepare,
+ .trigger = bf5xx_pcm_trigger,
+ .pointer = bf5xx_pcm_pointer,
+ .copy = bf5xx_pcm_copy,
+ .silence = bf5xx_pcm_silence,
+};
+
+static int bf5xx_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream)
+{
+ struct snd_pcm_substream *substream = pcm->streams[stream].substream;
+ struct snd_dma_buffer *buf = &substream->dma_buffer;
+ size_t size = bf5xx_pcm_hardware.buffer_bytes_max;
+
+ buf->dev.type = SNDRV_DMA_TYPE_DEV;
+ buf->dev.dev = pcm->card->dev;
+ buf->private_data = NULL;
+ buf->area = dma_alloc_coherent(pcm->card->dev, size * 4,
+ &buf->addr, GFP_KERNEL);
+ if (!buf->area) {
+ pr_err("Failed to allocate dma memory \
+ Please increase uncached DMA memory region\n");
+ return -ENOMEM;
+ }
+ buf->bytes = size;
+
+ if (stream == SNDRV_PCM_STREAM_PLAYBACK)
+ sport_handle->tx_buf = buf->area;
+ else
+ sport_handle->rx_buf = buf->area;
+
+ return 0;
+}
+
+static void bf5xx_pcm_free_dma_buffers(struct snd_pcm *pcm)
+{
+ struct snd_pcm_substream *substream;
+ struct snd_dma_buffer *buf;
+ int stream;
+
+ for (stream = 0; stream < 2; stream++) {
+ substream = pcm->streams[stream].substream;
+ if (!substream)
+ continue;
+
+ buf = &substream->dma_buffer;
+ if (!buf->area)
+ continue;
+ dma_free_coherent(NULL, buf->bytes, buf->area, 0);
+ buf->area = NULL;
+ }
+ if (sport_handle)
+ sport_done(sport_handle);
+}
+
+static u64 bf5xx_pcm_dmamask = DMA_BIT_MASK(32);
+
+static int bf5xx_pcm_tdm_new(struct snd_card *card, struct snd_soc_dai *dai,
+ struct snd_pcm *pcm)
+{
+ int ret = 0;
+
+ if (!card->dev->dma_mask)
+ card->dev->dma_mask = &bf5xx_pcm_dmamask;
+ if (!card->dev->coherent_dma_mask)
+ card->dev->coherent_dma_mask = DMA_BIT_MASK(32);
+
+ if (dai->playback.channels_min) {
+ ret = bf5xx_pcm_preallocate_dma_buffer(pcm,
+ SNDRV_PCM_STREAM_PLAYBACK);
+ if (ret)
+ goto out;
+ }
+
+ if (dai->capture.channels_min) {
+ ret = bf5xx_pcm_preallocate_dma_buffer(pcm,
+ SNDRV_PCM_STREAM_CAPTURE);
+ if (ret)
+ goto out;
+ }
+out:
+ return ret;
+}
+
+struct snd_soc_platform bf5xx_tdm_soc_platform = {
+ .name = "bf5xx-audio",
+ .pcm_ops = &bf5xx_pcm_tdm_ops,
+ .pcm_new = bf5xx_pcm_tdm_new,
+ .pcm_free = bf5xx_pcm_free_dma_buffers,
+};
+EXPORT_SYMBOL_GPL(bf5xx_tdm_soc_platform);
+
+static int __init bfin_pcm_tdm_init(void)
+{
+ return snd_soc_register_platform(&bf5xx_tdm_soc_platform);
+}
+module_init(bfin_pcm_tdm_init);
+
+static void __exit bfin_pcm_tdm_exit(void)
+{
+ snd_soc_unregister_platform(&bf5xx_tdm_soc_platform);
+}
+module_exit(bfin_pcm_tdm_exit);
+
+MODULE_AUTHOR("Barry Song");
+MODULE_DESCRIPTION("ADI Blackfin TDM PCM DMA module");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * sound/soc/blackfin/bf5xx-tdm-pcm.h -- ALSA PCM interface for the Blackfin
+ *
+ * Copyright 2009 Analog Device Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _BF5XX_TDM_PCM_H
+#define _BF5XX_TDM_PCM_H
+
+struct bf5xx_pcm_dma_params {
+ char *name; /* stream identifier */
+};
+
+/* platform data */
+extern struct snd_soc_platform bf5xx_tdm_soc_platform;
+
+#endif
--- /dev/null
+/*
+ * File: sound/soc/blackfin/bf5xx-tdm.c
+ * Author: Barry Song <Barry.Song@analog.com>
+ *
+ * Created: Thurs June 04 2009
+ * Description: Blackfin I2S(TDM) CPU DAI driver
+ * Even though TDM mode can be as part of I2S DAI, but there
+ * are so much difference in configuration and data flow,
+ * it's very ugly to integrate I2S and TDM into a module
+ *
+ * Modified:
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+
+#include <asm/irq.h>
+#include <asm/portmux.h>
+#include <linux/mutex.h>
+#include <linux/gpio.h>
+
+#include "bf5xx-sport.h"
+#include "bf5xx-tdm.h"
+
+struct bf5xx_tdm_port {
+ u16 tcr1;
+ u16 rcr1;
+ u16 tcr2;
+ u16 rcr2;
+ int configured;
+};
+
+static struct bf5xx_tdm_port bf5xx_tdm;
+static int sport_num = CONFIG_SND_BF5XX_SPORT_NUM;
+
+static struct sport_param sport_params[2] = {
+ {
+ .dma_rx_chan = CH_SPORT0_RX,
+ .dma_tx_chan = CH_SPORT0_TX,
+ .err_irq = IRQ_SPORT0_ERROR,
+ .regs = (struct sport_register *)SPORT0_TCR1,
+ },
+ {
+ .dma_rx_chan = CH_SPORT1_RX,
+ .dma_tx_chan = CH_SPORT1_TX,
+ .err_irq = IRQ_SPORT1_ERROR,
+ .regs = (struct sport_register *)SPORT1_TCR1,
+ }
+};
+
+/*
+ * Setting the TFS pin selector for SPORT 0 based on whether the selected
+ * port id F or G. If the port is F then no conflict should exist for the
+ * TFS. When Port G is selected and EMAC then there is a conflict between
+ * the PHY interrupt line and TFS. Current settings prevent the conflict
+ * by ignoring the TFS pin when Port G is selected. This allows both
+ * ssm2602 using Port G and EMAC concurrently.
+ */
+#ifdef CONFIG_BF527_SPORT0_PORTF
+#define LOCAL_SPORT0_TFS (P_SPORT0_TFS)
+#else
+#define LOCAL_SPORT0_TFS (0)
+#endif
+
+static u16 sport_req[][7] = { {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+ P_SPORT0_DRPRI, P_SPORT0_RSCLK, LOCAL_SPORT0_TFS, 0},
+ {P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, P_SPORT1_DRPRI,
+ P_SPORT1_RSCLK, P_SPORT1_TFS, 0} };
+
+static int bf5xx_tdm_set_dai_fmt(struct snd_soc_dai *cpu_dai,
+ unsigned int fmt)
+{
+ int ret = 0;
+
+ /* interface format:support TDM,slave mode */
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_DSP_A:
+ break;
+ default:
+ printk(KERN_ERR "%s: Unknown DAI format type\n", __func__);
+ ret = -EINVAL;
+ break;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBM_CFM:
+ break;
+ case SND_SOC_DAIFMT_CBS_CFS:
+ case SND_SOC_DAIFMT_CBM_CFS:
+ case SND_SOC_DAIFMT_CBS_CFM:
+ ret = -EINVAL;
+ break;
+ default:
+ printk(KERN_ERR "%s: Unknown DAI master type\n", __func__);
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+static int bf5xx_tdm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ int ret = 0;
+
+ bf5xx_tdm.tcr2 &= ~0x1f;
+ bf5xx_tdm.rcr2 &= ~0x1f;
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S32_LE:
+ bf5xx_tdm.tcr2 |= 31;
+ bf5xx_tdm.rcr2 |= 31;
+ sport_handle->wdsize = 4;
+ break;
+ /* at present, we only support 32bit transfer */
+ default:
+ pr_err("not supported PCM format yet\n");
+ return -EINVAL;
+ break;
+ }
+
+ if (!bf5xx_tdm.configured) {
+ /*
+ * TX and RX are not independent,they are enabled at the
+ * same time, even if only one side is running. So, we
+ * need to configure both of them at the time when the first
+ * stream is opened.
+ *
+ * CPU DAI:slave mode.
+ */
+ ret = sport_config_rx(sport_handle, bf5xx_tdm.rcr1,
+ bf5xx_tdm.rcr2, 0, 0);
+ if (ret) {
+ pr_err("SPORT is busy!\n");
+ return -EBUSY;
+ }
+
+ ret = sport_config_tx(sport_handle, bf5xx_tdm.tcr1,
+ bf5xx_tdm.tcr2, 0, 0);
+ if (ret) {
+ pr_err("SPORT is busy!\n");
+ return -EBUSY;
+ }
+
+ bf5xx_tdm.configured = 1;
+ }
+
+ return 0;
+}
+
+static void bf5xx_tdm_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ /* No active stream, SPORT is allowed to be configured again. */
+ if (!dai->active)
+ bf5xx_tdm.configured = 0;
+}
+
+#ifdef CONFIG_PM
+static int bf5xx_tdm_suspend(struct snd_soc_dai *dai)
+{
+ struct sport_device *sport =
+ (struct sport_device *)dai->private_data;
+
+ if (!dai->active)
+ return 0;
+ if (dai->capture.active)
+ sport_rx_stop(sport);
+ if (dai->playback.active)
+ sport_tx_stop(sport);
+ return 0;
+}
+
+static int bf5xx_tdm_resume(struct snd_soc_dai *dai)
+{
+ int ret;
+ struct sport_device *sport =
+ (struct sport_device *)dai->private_data;
+
+ if (!dai->active)
+ return 0;
+
+ ret = sport_set_multichannel(sport, 8, 0xFF, 1);
+ if (ret) {
+ pr_err("SPORT is busy!\n");
+ ret = -EBUSY;
+ }
+
+ ret = sport_config_rx(sport, IRFS, 0x1F, 0, 0);
+ if (ret) {
+ pr_err("SPORT is busy!\n");
+ ret = -EBUSY;
+ }
+
+ ret = sport_config_tx(sport, ITFS, 0x1F, 0, 0);
+ if (ret) {
+ pr_err("SPORT is busy!\n");
+ ret = -EBUSY;
+ }
+
+ return 0;
+}
+
+#else
+#define bf5xx_tdm_suspend NULL
+#define bf5xx_tdm_resume NULL
+#endif
+
+static struct snd_soc_dai_ops bf5xx_tdm_dai_ops = {
+ .hw_params = bf5xx_tdm_hw_params,
+ .set_fmt = bf5xx_tdm_set_dai_fmt,
+ .shutdown = bf5xx_tdm_shutdown,
+};
+
+struct snd_soc_dai bf5xx_tdm_dai = {
+ .name = "bf5xx-tdm",
+ .id = 0,
+ .suspend = bf5xx_tdm_suspend,
+ .resume = bf5xx_tdm_resume,
+ .playback = {
+ .channels_min = 2,
+ .channels_max = 8,
+ .rates = SNDRV_PCM_RATE_48000,
+ .formats = SNDRV_PCM_FMTBIT_S32_LE,},
+ .capture = {
+ .channels_min = 2,
+ .channels_max = 8,
+ .rates = SNDRV_PCM_RATE_48000,
+ .formats = SNDRV_PCM_FMTBIT_S32_LE,},
+ .ops = &bf5xx_tdm_dai_ops,
+};
+EXPORT_SYMBOL_GPL(bf5xx_tdm_dai);
+
+static int __devinit bfin_tdm_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+
+ if (peripheral_request_list(&sport_req[sport_num][0], "soc-audio")) {
+ pr_err("Requesting Peripherals failed\n");
+ return -EFAULT;
+ }
+
+ /* request DMA for SPORT */
+ sport_handle = sport_init(&sport_params[sport_num], 4, \
+ 8 * sizeof(u32), NULL);
+ if (!sport_handle) {
+ peripheral_free_list(&sport_req[sport_num][0]);
+ return -ENODEV;
+ }
+
+ /* SPORT works in TDM mode */
+ ret = sport_set_multichannel(sport_handle, 8, 0xFF, 1);
+ if (ret) {
+ pr_err("SPORT is busy!\n");
+ ret = -EBUSY;
+ goto sport_config_err;
+ }
+
+ ret = sport_config_rx(sport_handle, IRFS, 0x1F, 0, 0);
+ if (ret) {
+ pr_err("SPORT is busy!\n");
+ ret = -EBUSY;
+ goto sport_config_err;
+ }
+
+ ret = sport_config_tx(sport_handle, ITFS, 0x1F, 0, 0);
+ if (ret) {
+ pr_err("SPORT is busy!\n");
+ ret = -EBUSY;
+ goto sport_config_err;
+ }
+
+ ret = snd_soc_register_dai(&bf5xx_tdm_dai);
+ if (ret) {
+ pr_err("Failed to register DAI: %d\n", ret);
+ goto sport_config_err;
+ }
+ return 0;
+
+sport_config_err:
+ peripheral_free_list(&sport_req[sport_num][0]);
+ return ret;
+}
+
+static int __devexit bfin_tdm_remove(struct platform_device *pdev)
+{
+ peripheral_free_list(&sport_req[sport_num][0]);
+ snd_soc_unregister_dai(&bf5xx_tdm_dai);
+
+ return 0;
+}
+
+static struct platform_driver bfin_tdm_driver = {
+ .probe = bfin_tdm_probe,
+ .remove = __devexit_p(bfin_tdm_remove),
+ .driver = {
+ .name = "bfin-tdm",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init bfin_tdm_init(void)
+{
+ return platform_driver_register(&bfin_tdm_driver);
+}
+module_init(bfin_tdm_init);
+
+static void __exit bfin_tdm_exit(void)
+{
+ platform_driver_unregister(&bfin_tdm_driver);
+}
+module_exit(bfin_tdm_exit);
+
+/* Module information */
+MODULE_AUTHOR("Barry Song");
+MODULE_DESCRIPTION("TDM driver for ADI Blackfin");
+MODULE_LICENSE("GPL");
+
--- /dev/null
+/*
+ * sound/soc/blackfin/bf5xx-tdm.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _BF5XX_TDM_H
+#define _BF5XX_TDM_H
+
+extern struct snd_soc_dai bf5xx_tdm_dai;
+
+#endif
tristate "Build all ASoC CODEC drivers"
select SND_SOC_L3
select SND_SOC_AC97_CODEC if SND_SOC_AC97_BUS
+ select SND_SOC_AD1836 if SPI_MASTER
+ select SND_SOC_AD1938 if SPI_MASTER
select SND_SOC_AD1980 if SND_SOC_AC97_BUS
select SND_SOC_AD73311 if I2C
select SND_SOC_AK4104 if SPI_MASTER
select SND_SOC_AK4535 if I2C
+ select SND_SOC_AK4642 if I2C
select SND_SOC_CS4270 if I2C
+ select SND_SOC_MAX9877 if I2C
select SND_SOC_PCM3008
select SND_SOC_SPDIF
select SND_SOC_SSM2602 if I2C
select SND_SOC_WM8350 if MFD_WM8350
select SND_SOC_WM8400 if MFD_WM8400
select SND_SOC_WM8510 if SND_SOC_I2C_AND_SPI
+ select SND_SOC_WM8523 if I2C
select SND_SOC_WM8580 if I2C
select SND_SOC_WM8728 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8731 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8750 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8753 if SND_SOC_I2C_AND_SPI
+ select SND_SOC_WM8776 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8900 if I2C
select SND_SOC_WM8903 if I2C
select SND_SOC_WM8940 if I2C
select SND_SOC_WM8960 if I2C
+ select SND_SOC_WM8961 if I2C
select SND_SOC_WM8971 if I2C
+ select SND_SOC_WM8974 if I2C
select SND_SOC_WM8988 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8990 if I2C
+ select SND_SOC_WM8993 if I2C
select SND_SOC_WM9081 if I2C
select SND_SOC_WM9705 if SND_SOC_AC97_BUS
select SND_SOC_WM9712 if SND_SOC_AC97_BUS
If unsure select "N".
+config SND_SOC_WM_HUBS
+ tristate
+ default y if SND_SOC_WM8993=y
+ default m if SND_SOC_WM8993=m
config SND_SOC_AC97_CODEC
tristate
select SND_AC97_CODEC
+config SND_SOC_AD1836
+ tristate
+
+config SND_SOC_AD1938
+ tristate
+
config SND_SOC_AD1980
tristate
config SND_SOC_AK4535
tristate
+config SND_SOC_AK4642
+ tristate
+
# Cirrus Logic CS4270 Codec
config SND_SOC_CS4270
tristate
bool
depends on SND_SOC_CS4270
+config SND_SOC_CX20442
+ tristate
+
config SND_SOC_L3
tristate
config SND_SOC_WM8510
tristate
+config SND_SOC_WM8523
+ tristate
+
config SND_SOC_WM8580
tristate
config SND_SOC_WM8753
tristate
+config SND_SOC_WM8776
+ tristate
+
config SND_SOC_WM8900
tristate
config SND_SOC_WM8960
tristate
+config SND_SOC_WM8961
+ tristate
+
config SND_SOC_WM8971
tristate
+config SND_SOC_WM8974
+ tristate
+
config SND_SOC_WM8988
tristate
config SND_SOC_WM8990
tristate
+config SND_SOC_WM8993
+ tristate
+
config SND_SOC_WM9081
tristate
config SND_SOC_WM9713
tristate
+
+# Amp
+config SND_SOC_MAX9877
+ tristate
snd-soc-ac97-objs := ac97.o
+snd-soc-ad1836-objs := ad1836.o
+snd-soc-ad1938-objs := ad1938.o
snd-soc-ad1980-objs := ad1980.o
snd-soc-ad73311-objs := ad73311.o
snd-soc-ak4104-objs := ak4104.o
snd-soc-ak4535-objs := ak4535.o
+snd-soc-ak4642-objs := ak4642.o
snd-soc-cs4270-objs := cs4270.o
+snd-soc-cx20442-objs := cx20442.o
snd-soc-l3-objs := l3.o
snd-soc-pcm3008-objs := pcm3008.o
snd-soc-spdif-objs := spdif_transciever.o
snd-soc-wm8350-objs := wm8350.o
snd-soc-wm8400-objs := wm8400.o
snd-soc-wm8510-objs := wm8510.o
+snd-soc-wm8523-objs := wm8523.o
snd-soc-wm8580-objs := wm8580.o
snd-soc-wm8728-objs := wm8728.o
snd-soc-wm8731-objs := wm8731.o
snd-soc-wm8750-objs := wm8750.o
snd-soc-wm8753-objs := wm8753.o
+snd-soc-wm8776-objs := wm8776.o
snd-soc-wm8900-objs := wm8900.o
snd-soc-wm8903-objs := wm8903.o
snd-soc-wm8940-objs := wm8940.o
snd-soc-wm8960-objs := wm8960.o
+snd-soc-wm8961-objs := wm8961.o
snd-soc-wm8971-objs := wm8971.o
+snd-soc-wm8974-objs := wm8974.o
snd-soc-wm8988-objs := wm8988.o
snd-soc-wm8990-objs := wm8990.o
+snd-soc-wm8993-objs := wm8993.o
snd-soc-wm9081-objs := wm9081.o
snd-soc-wm9705-objs := wm9705.o
snd-soc-wm9712-objs := wm9712.o
snd-soc-wm9713-objs := wm9713.o
+snd-soc-wm-hubs-objs := wm_hubs.o
+
+# Amp
+snd-soc-max9877-objs := max9877.o
obj-$(CONFIG_SND_SOC_AC97_CODEC) += snd-soc-ac97.o
+obj-$(CONFIG_SND_SOC_AD1836) += snd-soc-ad1836.o
+obj-$(CONFIG_SND_SOC_AD1938) += snd-soc-ad1938.o
obj-$(CONFIG_SND_SOC_AD1980) += snd-soc-ad1980.o
obj-$(CONFIG_SND_SOC_AD73311) += snd-soc-ad73311.o
obj-$(CONFIG_SND_SOC_AK4104) += snd-soc-ak4104.o
obj-$(CONFIG_SND_SOC_AK4535) += snd-soc-ak4535.o
+obj-$(CONFIG_SND_SOC_AK4642) += snd-soc-ak4642.o
obj-$(CONFIG_SND_SOC_CS4270) += snd-soc-cs4270.o
+obj-$(CONFIG_SND_SOC_CX20442) += snd-soc-cx20442.o
obj-$(CONFIG_SND_SOC_L3) += snd-soc-l3.o
obj-$(CONFIG_SND_SOC_PCM3008) += snd-soc-pcm3008.o
obj-$(CONFIG_SND_SOC_SPDIF) += snd-soc-spdif.o
obj-$(CONFIG_SND_SOC_WM8350) += snd-soc-wm8350.o
obj-$(CONFIG_SND_SOC_WM8400) += snd-soc-wm8400.o
obj-$(CONFIG_SND_SOC_WM8510) += snd-soc-wm8510.o
+obj-$(CONFIG_SND_SOC_WM8523) += snd-soc-wm8523.o
obj-$(CONFIG_SND_SOC_WM8580) += snd-soc-wm8580.o
obj-$(CONFIG_SND_SOC_WM8728) += snd-soc-wm8728.o
obj-$(CONFIG_SND_SOC_WM8731) += snd-soc-wm8731.o
obj-$(CONFIG_SND_SOC_WM8750) += snd-soc-wm8750.o
obj-$(CONFIG_SND_SOC_WM8753) += snd-soc-wm8753.o
+obj-$(CONFIG_SND_SOC_WM8776) += snd-soc-wm8776.o
obj-$(CONFIG_SND_SOC_WM8900) += snd-soc-wm8900.o
obj-$(CONFIG_SND_SOC_WM8903) += snd-soc-wm8903.o
obj-$(CONFIG_SND_SOC_WM8971) += snd-soc-wm8971.o
+obj-$(CONFIG_SND_SOC_WM8974) += snd-soc-wm8974.o
obj-$(CONFIG_SND_SOC_WM8940) += snd-soc-wm8940.o
obj-$(CONFIG_SND_SOC_WM8960) += snd-soc-wm8960.o
+obj-$(CONFIG_SND_SOC_WM8961) += snd-soc-wm8961.o
obj-$(CONFIG_SND_SOC_WM8988) += snd-soc-wm8988.o
obj-$(CONFIG_SND_SOC_WM8990) += snd-soc-wm8990.o
+obj-$(CONFIG_SND_SOC_WM8993) += snd-soc-wm8993.o
obj-$(CONFIG_SND_SOC_WM9081) += snd-soc-wm9081.o
obj-$(CONFIG_SND_SOC_WM9705) += snd-soc-wm9705.o
obj-$(CONFIG_SND_SOC_WM9712) += snd-soc-wm9712.o
obj-$(CONFIG_SND_SOC_WM9713) += snd-soc-wm9713.o
+obj-$(CONFIG_SND_SOC_WM_HUBS) += snd-soc-wm-hubs.o
+
+# Amp
+obj-$(CONFIG_SND_SOC_MAX9877) += snd-soc-max9877.o
--- /dev/null
+/*
+ * File: sound/soc/codecs/ad1836.c
+ * Author: Barry Song <Barry.Song@analog.com>
+ *
+ * Created: Aug 04 2009
+ * Description: Driver for AD1836 sound chip
+ *
+ * Modified:
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+#include <sound/tlv.h>
+#include <sound/soc-dapm.h>
+#include <linux/spi/spi.h>
+#include "ad1836.h"
+
+/* codec private data */
+struct ad1836_priv {
+ struct snd_soc_codec codec;
+ u16 reg_cache[AD1836_NUM_REGS];
+};
+
+static struct snd_soc_codec *ad1836_codec;
+struct snd_soc_codec_device soc_codec_dev_ad1836;
+static int ad1836_register(struct ad1836_priv *ad1836);
+static void ad1836_unregister(struct ad1836_priv *ad1836);
+
+/*
+ * AD1836 volume/mute/de-emphasis etc. controls
+ */
+static const char *ad1836_deemp[] = {"None", "44.1kHz", "32kHz", "48kHz"};
+
+static const struct soc_enum ad1836_deemp_enum =
+ SOC_ENUM_SINGLE(AD1836_DAC_CTRL1, 8, 4, ad1836_deemp);
+
+static const struct snd_kcontrol_new ad1836_snd_controls[] = {
+ /* DAC volume control */
+ SOC_DOUBLE_R("DAC1 Volume", AD1836_DAC_L1_VOL,
+ AD1836_DAC_R1_VOL, 0, 0x3FF, 0),
+ SOC_DOUBLE_R("DAC2 Volume", AD1836_DAC_L2_VOL,
+ AD1836_DAC_R2_VOL, 0, 0x3FF, 0),
+ SOC_DOUBLE_R("DAC3 Volume", AD1836_DAC_L3_VOL,
+ AD1836_DAC_R3_VOL, 0, 0x3FF, 0),
+
+ /* ADC switch control */
+ SOC_DOUBLE("ADC1 Switch", AD1836_ADC_CTRL2, AD1836_ADCL1_MUTE,
+ AD1836_ADCR1_MUTE, 1, 1),
+ SOC_DOUBLE("ADC2 Switch", AD1836_ADC_CTRL2, AD1836_ADCL2_MUTE,
+ AD1836_ADCR2_MUTE, 1, 1),
+
+ /* DAC switch control */
+ SOC_DOUBLE("DAC1 Switch", AD1836_DAC_CTRL2, AD1836_DACL1_MUTE,
+ AD1836_DACR1_MUTE, 1, 1),
+ SOC_DOUBLE("DAC2 Switch", AD1836_DAC_CTRL2, AD1836_DACL2_MUTE,
+ AD1836_DACR2_MUTE, 1, 1),
+ SOC_DOUBLE("DAC3 Switch", AD1836_DAC_CTRL2, AD1836_DACL3_MUTE,
+ AD1836_DACR3_MUTE, 1, 1),
+
+ /* ADC high-pass filter */
+ SOC_SINGLE("ADC High Pass Filter Switch", AD1836_ADC_CTRL1,
+ AD1836_ADC_HIGHPASS_FILTER, 1, 0),
+
+ /* DAC de-emphasis */
+ SOC_ENUM("Playback Deemphasis", ad1836_deemp_enum),
+};
+
+static const struct snd_soc_dapm_widget ad1836_dapm_widgets[] = {
+ SND_SOC_DAPM_DAC("DAC", "Playback", AD1836_DAC_CTRL1,
+ AD1836_DAC_POWERDOWN, 1),
+ SND_SOC_DAPM_ADC("ADC", "Capture", SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_SUPPLY("ADC_PWR", AD1836_ADC_CTRL1,
+ AD1836_ADC_POWERDOWN, 1, NULL, 0),
+ SND_SOC_DAPM_OUTPUT("DAC1OUT"),
+ SND_SOC_DAPM_OUTPUT("DAC2OUT"),
+ SND_SOC_DAPM_OUTPUT("DAC3OUT"),
+ SND_SOC_DAPM_INPUT("ADC1IN"),
+ SND_SOC_DAPM_INPUT("ADC2IN"),
+};
+
+static const struct snd_soc_dapm_route audio_paths[] = {
+ { "DAC", NULL, "ADC_PWR" },
+ { "ADC", NULL, "ADC_PWR" },
+ { "DAC1OUT", "DAC1 Switch", "DAC" },
+ { "DAC2OUT", "DAC2 Switch", "DAC" },
+ { "DAC3OUT", "DAC3 Switch", "DAC" },
+ { "ADC", "ADC1 Switch", "ADC1IN" },
+ { "ADC", "ADC2 Switch", "ADC2IN" },
+};
+
+/*
+ * DAI ops entries
+ */
+
+static int ad1836_set_dai_fmt(struct snd_soc_dai *codec_dai,
+ unsigned int fmt)
+{
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ /* at present, we support adc aux mode to interface with
+ * blackfin sport tdm mode
+ */
+ case SND_SOC_DAIFMT_DSP_A:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_IB_IF:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ /* ALCLK,ABCLK are both output, AD1836 can only be master */
+ case SND_SOC_DAIFMT_CBM_CFM:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int ad1836_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ int word_len = 0;
+
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_device *socdev = rtd->socdev;
+ struct snd_soc_codec *codec = socdev->card->codec;
+
+ /* bit size */
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ word_len = 3;
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ word_len = 1;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ case SNDRV_PCM_FORMAT_S32_LE:
+ word_len = 0;
+ break;
+ }
+
+ snd_soc_update_bits(codec, AD1836_DAC_CTRL1,
+ AD1836_DAC_WORD_LEN_MASK, word_len);
+
+ snd_soc_update_bits(codec, AD1836_ADC_CTRL2,
+ AD1836_ADC_WORD_LEN_MASK, word_len);
+
+ return 0;
+}
+
+
+/*
+ * interface to read/write ad1836 register
+ */
+#define AD1836_SPI_REG_SHFT 12
+#define AD1836_SPI_READ (1 << 11)
+#define AD1836_SPI_VAL_MSK 0x3FF
+
+/*
+ * write to the ad1836 register space
+ */
+
+static int ad1836_write_reg(struct snd_soc_codec *codec, unsigned int reg,
+ unsigned int value)
+{
+ u16 *reg_cache = codec->reg_cache;
+ int ret = 0;
+
+ if (value != reg_cache[reg]) {
+ unsigned short buf;
+ struct spi_transfer t = {
+ .tx_buf = &buf,
+ .len = 2,
+ };
+ struct spi_message m;
+
+ buf = (reg << AD1836_SPI_REG_SHFT) |
+ (value & AD1836_SPI_VAL_MSK);
+ spi_message_init(&m);
+ spi_message_add_tail(&t, &m);
+ ret = spi_sync(codec->control_data, &m);
+ if (ret == 0)
+ reg_cache[reg] = value;
+ }
+
+ return ret;
+}
+
+/*
+ * read from the ad1836 register space cache
+ */
+static unsigned int ad1836_read_reg_cache(struct snd_soc_codec *codec,
+ unsigned int reg)
+{
+ u16 *reg_cache = codec->reg_cache;
+
+ if (reg >= codec->reg_cache_size)
+ return -EINVAL;
+
+ return reg_cache[reg];
+}
+
+static int __devinit ad1836_spi_probe(struct spi_device *spi)
+{
+ struct snd_soc_codec *codec;
+ struct ad1836_priv *ad1836;
+
+ ad1836 = kzalloc(sizeof(struct ad1836_priv), GFP_KERNEL);
+ if (ad1836 == NULL)
+ return -ENOMEM;
+
+ codec = &ad1836->codec;
+ codec->control_data = spi;
+ codec->dev = &spi->dev;
+
+ dev_set_drvdata(&spi->dev, ad1836);
+
+ return ad1836_register(ad1836);
+}
+
+static int __devexit ad1836_spi_remove(struct spi_device *spi)
+{
+ struct ad1836_priv *ad1836 = dev_get_drvdata(&spi->dev);
+
+ ad1836_unregister(ad1836);
+ return 0;
+}
+
+static struct spi_driver ad1836_spi_driver = {
+ .driver = {
+ .name = "ad1836-spi",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = ad1836_spi_probe,
+ .remove = __devexit_p(ad1836_spi_remove),
+};
+
+static struct snd_soc_dai_ops ad1836_dai_ops = {
+ .hw_params = ad1836_hw_params,
+ .set_fmt = ad1836_set_dai_fmt,
+};
+
+/* codec DAI instance */
+struct snd_soc_dai ad1836_dai = {
+ .name = "AD1836",
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 2,
+ .channels_max = 6,
+ .rates = SNDRV_PCM_RATE_48000,
+ .formats = SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_LE,
+ },
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 2,
+ .channels_max = 4,
+ .rates = SNDRV_PCM_RATE_48000,
+ .formats = SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_LE,
+ },
+ .ops = &ad1836_dai_ops,
+};
+EXPORT_SYMBOL_GPL(ad1836_dai);
+
+static int ad1836_register(struct ad1836_priv *ad1836)
+{
+ int ret;
+ struct snd_soc_codec *codec = &ad1836->codec;
+
+ if (ad1836_codec) {
+ dev_err(codec->dev, "Another ad1836 is registered\n");
+ return -EINVAL;
+ }
+
+ mutex_init(&codec->mutex);
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
+ codec->private_data = ad1836;
+ codec->reg_cache = ad1836->reg_cache;
+ codec->reg_cache_size = AD1836_NUM_REGS;
+ codec->name = "AD1836";
+ codec->owner = THIS_MODULE;
+ codec->dai = &ad1836_dai;
+ codec->num_dai = 1;
+ codec->write = ad1836_write_reg;
+ codec->read = ad1836_read_reg_cache;
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
+
+ ad1836_dai.dev = codec->dev;
+ ad1836_codec = codec;
+
+ /* default setting for ad1836 */
+ /* de-emphasis: 48kHz, power-on dac */
+ codec->write(codec, AD1836_DAC_CTRL1, 0x300);
+ /* unmute dac channels */
+ codec->write(codec, AD1836_DAC_CTRL2, 0x0);
+ /* high-pass filter enable, power-on adc */
+ codec->write(codec, AD1836_ADC_CTRL1, 0x100);
+ /* unmute adc channles, adc aux mode */
+ codec->write(codec, AD1836_ADC_CTRL2, 0x180);
+ /* left/right diff:PGA/MUX */
+ codec->write(codec, AD1836_ADC_CTRL3, 0x3A);
+ /* volume */
+ codec->write(codec, AD1836_DAC_L1_VOL, 0x3FF);
+ codec->write(codec, AD1836_DAC_R1_VOL, 0x3FF);
+ codec->write(codec, AD1836_DAC_L2_VOL, 0x3FF);
+ codec->write(codec, AD1836_DAC_R2_VOL, 0x3FF);
+ codec->write(codec, AD1836_DAC_L3_VOL, 0x3FF);
+ codec->write(codec, AD1836_DAC_R3_VOL, 0x3FF);
+
+ ret = snd_soc_register_codec(codec);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+ kfree(ad1836);
+ return ret;
+ }
+
+ ret = snd_soc_register_dai(&ad1836_dai);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
+ snd_soc_unregister_codec(codec);
+ kfree(ad1836);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void ad1836_unregister(struct ad1836_priv *ad1836)
+{
+ snd_soc_unregister_dai(&ad1836_dai);
+ snd_soc_unregister_codec(&ad1836->codec);
+ kfree(ad1836);
+ ad1836_codec = NULL;
+}
+
+static int ad1836_probe(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec;
+ int ret = 0;
+
+ if (ad1836_codec == NULL) {
+ dev_err(&pdev->dev, "Codec device not registered\n");
+ return -ENODEV;
+ }
+
+ socdev->card->codec = ad1836_codec;
+ codec = ad1836_codec;
+
+ /* register pcms */
+ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+ if (ret < 0) {
+ dev_err(codec->dev, "failed to create pcms: %d\n", ret);
+ goto pcm_err;
+ }
+
+ snd_soc_add_controls(codec, ad1836_snd_controls,
+ ARRAY_SIZE(ad1836_snd_controls));
+ snd_soc_dapm_new_controls(codec, ad1836_dapm_widgets,
+ ARRAY_SIZE(ad1836_dapm_widgets));
+ snd_soc_dapm_add_routes(codec, audio_paths, ARRAY_SIZE(audio_paths));
+ snd_soc_dapm_new_widgets(codec);
+
+ ret = snd_soc_init_card(socdev);
+ if (ret < 0) {
+ dev_err(codec->dev, "failed to register card: %d\n", ret);
+ goto card_err;
+ }
+
+ return ret;
+
+card_err:
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+pcm_err:
+ return ret;
+}
+
+/* power down chip */
+static int ad1836_remove(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+
+ return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_ad1836 = {
+ .probe = ad1836_probe,
+ .remove = ad1836_remove,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_ad1836);
+
+static int __init ad1836_init(void)
+{
+ int ret;
+
+ ret = spi_register_driver(&ad1836_spi_driver);
+ if (ret != 0) {
+ printk(KERN_ERR "Failed to register ad1836 SPI driver: %d\n",
+ ret);
+ }
+
+ return ret;
+}
+module_init(ad1836_init);
+
+static void __exit ad1836_exit(void)
+{
+ spi_unregister_driver(&ad1836_spi_driver);
+}
+module_exit(ad1836_exit);
+
+MODULE_DESCRIPTION("ASoC ad1836 driver");
+MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * File: sound/soc/codecs/ad1836.h
+ * Based on:
+ * Author: Barry Song <Barry.Song@analog.com>
+ *
+ * Created: Aug 04, 2009
+ * Description: definitions for AD1836 registers
+ *
+ * Modified:
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __AD1836_H__
+#define __AD1836_H__
+
+#define AD1836_DAC_CTRL1 0
+#define AD1836_DAC_POWERDOWN 2
+#define AD1836_DAC_SERFMT_MASK 0xE0
+#define AD1836_DAC_SERFMT_PCK256 (0x4 << 5)
+#define AD1836_DAC_SERFMT_PCK128 (0x5 << 5)
+#define AD1836_DAC_WORD_LEN_MASK 0x18
+
+#define AD1836_DAC_CTRL2 1
+#define AD1836_DACL1_MUTE 0
+#define AD1836_DACR1_MUTE 1
+#define AD1836_DACL2_MUTE 2
+#define AD1836_DACR2_MUTE 3
+#define AD1836_DACL3_MUTE 4
+#define AD1836_DACR3_MUTE 5
+
+#define AD1836_DAC_L1_VOL 2
+#define AD1836_DAC_R1_VOL 3
+#define AD1836_DAC_L2_VOL 4
+#define AD1836_DAC_R2_VOL 5
+#define AD1836_DAC_L3_VOL 6
+#define AD1836_DAC_R3_VOL 7
+
+#define AD1836_ADC_CTRL1 12
+#define AD1836_ADC_POWERDOWN 7
+#define AD1836_ADC_HIGHPASS_FILTER 8
+
+#define AD1836_ADC_CTRL2 13
+#define AD1836_ADCL1_MUTE 0
+#define AD1836_ADCR1_MUTE 1
+#define AD1836_ADCL2_MUTE 2
+#define AD1836_ADCR2_MUTE 3
+#define AD1836_ADC_WORD_LEN_MASK 0x30
+#define AD1836_ADC_SERFMT_MASK (7 << 6)
+#define AD1836_ADC_SERFMT_PCK256 (0x4 << 6)
+#define AD1836_ADC_SERFMT_PCK128 (0x5 << 6)
+
+#define AD1836_ADC_CTRL3 14
+
+#define AD1836_NUM_REGS 16
+
+extern struct snd_soc_dai ad1836_dai;
+extern struct snd_soc_codec_device soc_codec_dev_ad1836;
+#endif
--- /dev/null
+/*
+ * File: sound/soc/codecs/ad1938.c
+ * Author: Barry Song <Barry.Song@analog.com>
+ *
+ * Created: June 04 2009
+ * Description: Driver for AD1938 sound chip
+ *
+ * Modified:
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+#include <sound/tlv.h>
+#include <sound/soc-dapm.h>
+#include <linux/spi/spi.h>
+#include "ad1938.h"
+
+/* codec private data */
+struct ad1938_priv {
+ struct snd_soc_codec codec;
+ u8 reg_cache[AD1938_NUM_REGS];
+};
+
+static struct snd_soc_codec *ad1938_codec;
+struct snd_soc_codec_device soc_codec_dev_ad1938;
+static int ad1938_register(struct ad1938_priv *ad1938);
+static void ad1938_unregister(struct ad1938_priv *ad1938);
+
+/*
+ * AD1938 volume/mute/de-emphasis etc. controls
+ */
+static const char *ad1938_deemp[] = {"None", "48kHz", "44.1kHz", "32kHz"};
+
+static const struct soc_enum ad1938_deemp_enum =
+ SOC_ENUM_SINGLE(AD1938_DAC_CTRL2, 1, 4, ad1938_deemp);
+
+static const struct snd_kcontrol_new ad1938_snd_controls[] = {
+ /* DAC volume control */
+ SOC_DOUBLE_R("DAC1 Volume", AD1938_DAC_L1_VOL,
+ AD1938_DAC_R1_VOL, 0, 0xFF, 1),
+ SOC_DOUBLE_R("DAC2 Volume", AD1938_DAC_L2_VOL,
+ AD1938_DAC_R2_VOL, 0, 0xFF, 1),
+ SOC_DOUBLE_R("DAC3 Volume", AD1938_DAC_L3_VOL,
+ AD1938_DAC_R3_VOL, 0, 0xFF, 1),
+ SOC_DOUBLE_R("DAC4 Volume", AD1938_DAC_L4_VOL,
+ AD1938_DAC_R4_VOL, 0, 0xFF, 1),
+
+ /* ADC switch control */
+ SOC_DOUBLE("ADC1 Switch", AD1938_ADC_CTRL0, AD1938_ADCL1_MUTE,
+ AD1938_ADCR1_MUTE, 1, 1),
+ SOC_DOUBLE("ADC2 Switch", AD1938_ADC_CTRL0, AD1938_ADCL2_MUTE,
+ AD1938_ADCR2_MUTE, 1, 1),
+
+ /* DAC switch control */
+ SOC_DOUBLE("DAC1 Switch", AD1938_DAC_CHNL_MUTE, AD1938_DACL1_MUTE,
+ AD1938_DACR1_MUTE, 1, 1),
+ SOC_DOUBLE("DAC2 Switch", AD1938_DAC_CHNL_MUTE, AD1938_DACL2_MUTE,
+ AD1938_DACR2_MUTE, 1, 1),
+ SOC_DOUBLE("DAC3 Switch", AD1938_DAC_CHNL_MUTE, AD1938_DACL3_MUTE,
+ AD1938_DACR3_MUTE, 1, 1),
+ SOC_DOUBLE("DAC4 Switch", AD1938_DAC_CHNL_MUTE, AD1938_DACL4_MUTE,
+ AD1938_DACR4_MUTE, 1, 1),
+
+ /* ADC high-pass filter */
+ SOC_SINGLE("ADC High Pass Filter Switch", AD1938_ADC_CTRL0,
+ AD1938_ADC_HIGHPASS_FILTER, 1, 0),
+
+ /* DAC de-emphasis */
+ SOC_ENUM("Playback Deemphasis", ad1938_deemp_enum),
+};
+
+static const struct snd_soc_dapm_widget ad1938_dapm_widgets[] = {
+ SND_SOC_DAPM_DAC("DAC", "Playback", AD1938_DAC_CTRL0, 0, 1),
+ SND_SOC_DAPM_ADC("ADC", "Capture", SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_SUPPLY("ADC_PWR", AD1938_ADC_CTRL0, 0, 1, NULL, 0),
+ SND_SOC_DAPM_OUTPUT("DAC1OUT"),
+ SND_SOC_DAPM_OUTPUT("DAC2OUT"),
+ SND_SOC_DAPM_OUTPUT("DAC3OUT"),
+ SND_SOC_DAPM_OUTPUT("DAC4OUT"),
+ SND_SOC_DAPM_INPUT("ADC1IN"),
+ SND_SOC_DAPM_INPUT("ADC2IN"),
+};
+
+static const struct snd_soc_dapm_route audio_paths[] = {
+ { "DAC", NULL, "ADC_PWR" },
+ { "ADC", NULL, "ADC_PWR" },
+ { "DAC1OUT", "DAC1 Switch", "DAC" },
+ { "DAC2OUT", "DAC2 Switch", "DAC" },
+ { "DAC3OUT", "DAC3 Switch", "DAC" },
+ { "DAC4OUT", "DAC4 Switch", "DAC" },
+ { "ADC", "ADC1 Switch", "ADC1IN" },
+ { "ADC", "ADC2 Switch", "ADC2IN" },
+};
+
+/*
+ * DAI ops entries
+ */
+
+static int ad1938_mute(struct snd_soc_dai *dai, int mute)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ int reg;
+
+ reg = codec->read(codec, AD1938_DAC_CTRL2);
+ reg = (mute > 0) ? reg | AD1938_DAC_MASTER_MUTE : reg &
+ (~AD1938_DAC_MASTER_MUTE);
+ codec->write(codec, AD1938_DAC_CTRL2, reg);
+
+ return 0;
+}
+
+static inline int ad1938_pll_powerctrl(struct snd_soc_codec *codec, int cmd)
+{
+ int reg = codec->read(codec, AD1938_PLL_CLK_CTRL0);
+ reg = (cmd > 0) ? reg & (~AD1938_PLL_POWERDOWN) : reg |
+ AD1938_PLL_POWERDOWN;
+ codec->write(codec, AD1938_PLL_CLK_CTRL0, reg);
+
+ return 0;
+}
+
+static int ad1938_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,
+ unsigned int mask, int slots, int width)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ int dac_reg = codec->read(codec, AD1938_DAC_CTRL1);
+ int adc_reg = codec->read(codec, AD1938_ADC_CTRL2);
+
+ dac_reg &= ~AD1938_DAC_CHAN_MASK;
+ adc_reg &= ~AD1938_ADC_CHAN_MASK;
+
+ switch (slots) {
+ case 2:
+ dac_reg |= AD1938_DAC_2_CHANNELS << AD1938_DAC_CHAN_SHFT;
+ adc_reg |= AD1938_ADC_2_CHANNELS << AD1938_ADC_CHAN_SHFT;
+ break;
+ case 4:
+ dac_reg |= AD1938_DAC_4_CHANNELS << AD1938_DAC_CHAN_SHFT;
+ adc_reg |= AD1938_ADC_4_CHANNELS << AD1938_ADC_CHAN_SHFT;
+ break;
+ case 8:
+ dac_reg |= AD1938_DAC_8_CHANNELS << AD1938_DAC_CHAN_SHFT;
+ adc_reg |= AD1938_ADC_8_CHANNELS << AD1938_ADC_CHAN_SHFT;
+ break;
+ case 16:
+ dac_reg |= AD1938_DAC_16_CHANNELS << AD1938_DAC_CHAN_SHFT;
+ adc_reg |= AD1938_ADC_16_CHANNELS << AD1938_ADC_CHAN_SHFT;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ codec->write(codec, AD1938_DAC_CTRL1, dac_reg);
+ codec->write(codec, AD1938_ADC_CTRL2, adc_reg);
+
+ return 0;
+}
+
+static int ad1938_set_dai_fmt(struct snd_soc_dai *codec_dai,
+ unsigned int fmt)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ int adc_reg, dac_reg;
+
+ adc_reg = codec->read(codec, AD1938_ADC_CTRL2);
+ dac_reg = codec->read(codec, AD1938_DAC_CTRL1);
+
+ /* At present, the driver only support AUX ADC mode(SND_SOC_DAIFMT_I2S
+ * with TDM) and ADC&DAC TDM mode(SND_SOC_DAIFMT_DSP_A)
+ */
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ adc_reg &= ~AD1938_ADC_SERFMT_MASK;
+ adc_reg |= AD1938_ADC_SERFMT_TDM;
+ break;
+ case SND_SOC_DAIFMT_DSP_A:
+ adc_reg &= ~AD1938_ADC_SERFMT_MASK;
+ adc_reg |= AD1938_ADC_SERFMT_AUX;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF: /* normal bit clock + frame */
+ adc_reg &= ~AD1938_ADC_LEFT_HIGH;
+ adc_reg &= ~AD1938_ADC_BCLK_INV;
+ dac_reg &= ~AD1938_DAC_LEFT_HIGH;
+ dac_reg &= ~AD1938_DAC_BCLK_INV;
+ break;
+ case SND_SOC_DAIFMT_NB_IF: /* normal bclk + invert frm */
+ adc_reg |= AD1938_ADC_LEFT_HIGH;
+ adc_reg &= ~AD1938_ADC_BCLK_INV;
+ dac_reg |= AD1938_DAC_LEFT_HIGH;
+ dac_reg &= ~AD1938_DAC_BCLK_INV;
+ break;
+ case SND_SOC_DAIFMT_IB_NF: /* invert bclk + normal frm */
+ adc_reg &= ~AD1938_ADC_LEFT_HIGH;
+ adc_reg |= AD1938_ADC_BCLK_INV;
+ dac_reg &= ~AD1938_DAC_LEFT_HIGH;
+ dac_reg |= AD1938_DAC_BCLK_INV;
+ break;
+
+ case SND_SOC_DAIFMT_IB_IF: /* invert bclk + frm */
+ adc_reg |= AD1938_ADC_LEFT_HIGH;
+ adc_reg |= AD1938_ADC_BCLK_INV;
+ dac_reg |= AD1938_DAC_LEFT_HIGH;
+ dac_reg |= AD1938_DAC_BCLK_INV;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBM_CFM: /* codec clk & frm master */
+ adc_reg |= AD1938_ADC_LCR_MASTER;
+ adc_reg |= AD1938_ADC_BCLK_MASTER;
+ dac_reg |= AD1938_DAC_LCR_MASTER;
+ dac_reg |= AD1938_DAC_BCLK_MASTER;
+ break;
+ case SND_SOC_DAIFMT_CBS_CFM: /* codec clk slave & frm master */
+ adc_reg |= AD1938_ADC_LCR_MASTER;
+ adc_reg &= ~AD1938_ADC_BCLK_MASTER;
+ dac_reg |= AD1938_DAC_LCR_MASTER;
+ dac_reg &= ~AD1938_DAC_BCLK_MASTER;
+ break;
+ case SND_SOC_DAIFMT_CBM_CFS: /* codec clk master & frame slave */
+ adc_reg &= ~AD1938_ADC_LCR_MASTER;
+ adc_reg |= AD1938_ADC_BCLK_MASTER;
+ dac_reg &= ~AD1938_DAC_LCR_MASTER;
+ dac_reg |= AD1938_DAC_BCLK_MASTER;
+ break;
+ case SND_SOC_DAIFMT_CBS_CFS: /* codec clk & frm slave */
+ adc_reg &= ~AD1938_ADC_LCR_MASTER;
+ adc_reg &= ~AD1938_ADC_BCLK_MASTER;
+ dac_reg &= ~AD1938_DAC_LCR_MASTER;
+ dac_reg &= ~AD1938_DAC_BCLK_MASTER;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ codec->write(codec, AD1938_ADC_CTRL2, adc_reg);
+ codec->write(codec, AD1938_DAC_CTRL1, dac_reg);
+
+ return 0;
+}
+
+static int ad1938_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ int word_len = 0, reg = 0;
+
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_device *socdev = rtd->socdev;
+ struct snd_soc_codec *codec = socdev->card->codec;
+
+ /* bit size */
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ word_len = 3;
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ word_len = 1;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ case SNDRV_PCM_FORMAT_S32_LE:
+ word_len = 0;
+ break;
+ }
+
+ reg = codec->read(codec, AD1938_DAC_CTRL2);
+ reg = (reg & (~AD1938_DAC_WORD_LEN_MASK)) | word_len;
+ codec->write(codec, AD1938_DAC_CTRL2, reg);
+
+ reg = codec->read(codec, AD1938_ADC_CTRL1);
+ reg = (reg & (~AD1938_ADC_WORD_LEN_MASK)) | word_len;
+ codec->write(codec, AD1938_ADC_CTRL1, reg);
+
+ return 0;
+}
+
+static int ad1938_set_bias_level(struct snd_soc_codec *codec,
+ enum snd_soc_bias_level level)
+{
+ switch (level) {
+ case SND_SOC_BIAS_ON:
+ ad1938_pll_powerctrl(codec, 1);
+ break;
+ case SND_SOC_BIAS_PREPARE:
+ break;
+ case SND_SOC_BIAS_STANDBY:
+ case SND_SOC_BIAS_OFF:
+ ad1938_pll_powerctrl(codec, 0);
+ break;
+ }
+ codec->bias_level = level;
+ return 0;
+}
+
+/*
+ * interface to read/write ad1938 register
+ */
+
+#define AD1938_SPI_ADDR 0x4
+#define AD1938_SPI_READ 0x1
+#define AD1938_SPI_BUFLEN 3
+
+/*
+ * write to the ad1938 register space
+ */
+
+static int ad1938_write_reg(struct snd_soc_codec *codec, unsigned int reg,
+ unsigned int value)
+{
+ u8 *reg_cache = codec->reg_cache;
+ int ret = 0;
+
+ if (value != reg_cache[reg]) {
+ uint8_t buf[AD1938_SPI_BUFLEN];
+ struct spi_transfer t = {
+ .tx_buf = buf,
+ .len = AD1938_SPI_BUFLEN,
+ };
+ struct spi_message m;
+
+ buf[0] = AD1938_SPI_ADDR << 1;
+ buf[1] = reg;
+ buf[2] = value;
+ spi_message_init(&m);
+ spi_message_add_tail(&t, &m);
+ ret = spi_sync(codec->control_data, &m);
+ if (ret == 0)
+ reg_cache[reg] = value;
+ }
+
+ return ret;
+}
+
+/*
+ * read from the ad1938 register space cache
+ */
+
+static unsigned int ad1938_read_reg_cache(struct snd_soc_codec *codec,
+ unsigned int reg)
+{
+ u8 *reg_cache = codec->reg_cache;
+
+ if (reg >= codec->reg_cache_size)
+ return -EINVAL;
+
+ return reg_cache[reg];
+}
+
+/*
+ * read from the ad1938 register space
+ */
+
+static unsigned int ad1938_read_reg(struct snd_soc_codec *codec,
+ unsigned int reg)
+{
+ char w_buf[AD1938_SPI_BUFLEN];
+ char r_buf[AD1938_SPI_BUFLEN];
+ int ret;
+
+ struct spi_transfer t = {
+ .tx_buf = w_buf,
+ .rx_buf = r_buf,
+ .len = AD1938_SPI_BUFLEN,
+ };
+ struct spi_message m;
+
+ w_buf[0] = (AD1938_SPI_ADDR << 1) | AD1938_SPI_READ;
+ w_buf[1] = reg;
+ w_buf[2] = 0;
+
+ spi_message_init(&m);
+ spi_message_add_tail(&t, &m);
+ ret = spi_sync(codec->control_data, &m);
+ if (ret == 0)
+ return r_buf[2];
+ else
+ return -EIO;
+}
+
+static int ad1938_fill_cache(struct snd_soc_codec *codec)
+{
+ int i;
+ u8 *reg_cache = codec->reg_cache;
+ struct spi_device *spi = codec->control_data;
+
+ for (i = 0; i < codec->reg_cache_size; i++) {
+ int ret = ad1938_read_reg(codec, i);
+ if (ret == -EIO) {
+ dev_err(&spi->dev, "AD1938 SPI read failure\n");
+ return ret;
+ }
+ reg_cache[i] = ret;
+ }
+
+ return 0;
+}
+
+static int __devinit ad1938_spi_probe(struct spi_device *spi)
+{
+ struct snd_soc_codec *codec;
+ struct ad1938_priv *ad1938;
+
+ ad1938 = kzalloc(sizeof(struct ad1938_priv), GFP_KERNEL);
+ if (ad1938 == NULL)
+ return -ENOMEM;
+
+ codec = &ad1938->codec;
+ codec->control_data = spi;
+ codec->dev = &spi->dev;
+
+ dev_set_drvdata(&spi->dev, ad1938);
+
+ return ad1938_register(ad1938);
+}
+
+static int __devexit ad1938_spi_remove(struct spi_device *spi)
+{
+ struct ad1938_priv *ad1938 = dev_get_drvdata(&spi->dev);
+
+ ad1938_unregister(ad1938);
+ return 0;
+}
+
+static struct spi_driver ad1938_spi_driver = {
+ .driver = {
+ .name = "ad1938",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = ad1938_spi_probe,
+ .remove = __devexit_p(ad1938_spi_remove),
+};
+
+static struct snd_soc_dai_ops ad1938_dai_ops = {
+ .hw_params = ad1938_hw_params,
+ .digital_mute = ad1938_mute,
+ .set_tdm_slot = ad1938_set_tdm_slot,
+ .set_fmt = ad1938_set_dai_fmt,
+};
+
+/* codec DAI instance */
+struct snd_soc_dai ad1938_dai = {
+ .name = "AD1938",
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 2,
+ .channels_max = 8,
+ .rates = SNDRV_PCM_RATE_48000,
+ .formats = SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_LE,
+ },
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 2,
+ .channels_max = 4,
+ .rates = SNDRV_PCM_RATE_48000,
+ .formats = SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_LE,
+ },
+ .ops = &ad1938_dai_ops,
+};
+EXPORT_SYMBOL_GPL(ad1938_dai);
+
+static int ad1938_register(struct ad1938_priv *ad1938)
+{
+ int ret;
+ struct snd_soc_codec *codec = &ad1938->codec;
+
+ if (ad1938_codec) {
+ dev_err(codec->dev, "Another ad1938 is registered\n");
+ return -EINVAL;
+ }
+
+ mutex_init(&codec->mutex);
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
+ codec->private_data = ad1938;
+ codec->reg_cache = ad1938->reg_cache;
+ codec->reg_cache_size = AD1938_NUM_REGS;
+ codec->name = "AD1938";
+ codec->owner = THIS_MODULE;
+ codec->dai = &ad1938_dai;
+ codec->num_dai = 1;
+ codec->write = ad1938_write_reg;
+ codec->read = ad1938_read_reg_cache;
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
+
+ ad1938_dai.dev = codec->dev;
+ ad1938_codec = codec;
+
+ /* default setting for ad1938 */
+
+ /* unmute dac channels */
+ codec->write(codec, AD1938_DAC_CHNL_MUTE, 0x0);
+ /* de-emphasis: 48kHz, powedown dac */
+ codec->write(codec, AD1938_DAC_CTRL2, 0x1A);
+ /* powerdown dac, dac in tdm mode */
+ codec->write(codec, AD1938_DAC_CTRL0, 0x41);
+ /* high-pass filter enable */
+ codec->write(codec, AD1938_ADC_CTRL0, 0x3);
+ /* sata delay=1, adc aux mode */
+ codec->write(codec, AD1938_ADC_CTRL1, 0x43);
+ /* pll input: mclki/xi */
+ codec->write(codec, AD1938_PLL_CLK_CTRL0, 0x9D);
+ codec->write(codec, AD1938_PLL_CLK_CTRL1, 0x04);
+
+ ad1938_fill_cache(codec);
+
+ ret = snd_soc_register_codec(codec);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+ kfree(ad1938);
+ return ret;
+ }
+
+ ret = snd_soc_register_dai(&ad1938_dai);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
+ snd_soc_unregister_codec(codec);
+ kfree(ad1938);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void ad1938_unregister(struct ad1938_priv *ad1938)
+{
+ ad1938_set_bias_level(&ad1938->codec, SND_SOC_BIAS_OFF);
+ snd_soc_unregister_dai(&ad1938_dai);
+ snd_soc_unregister_codec(&ad1938->codec);
+ kfree(ad1938);
+ ad1938_codec = NULL;
+}
+
+static int ad1938_probe(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec;
+ int ret = 0;
+
+ if (ad1938_codec == NULL) {
+ dev_err(&pdev->dev, "Codec device not registered\n");
+ return -ENODEV;
+ }
+
+ socdev->card->codec = ad1938_codec;
+ codec = ad1938_codec;
+
+ /* register pcms */
+ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+ if (ret < 0) {
+ dev_err(codec->dev, "failed to create pcms: %d\n", ret);
+ goto pcm_err;
+ }
+
+ snd_soc_add_controls(codec, ad1938_snd_controls,
+ ARRAY_SIZE(ad1938_snd_controls));
+ snd_soc_dapm_new_controls(codec, ad1938_dapm_widgets,
+ ARRAY_SIZE(ad1938_dapm_widgets));
+ snd_soc_dapm_add_routes(codec, audio_paths, ARRAY_SIZE(audio_paths));
+ snd_soc_dapm_new_widgets(codec);
+
+ ad1938_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+ ret = snd_soc_init_card(socdev);
+ if (ret < 0) {
+ dev_err(codec->dev, "failed to register card: %d\n", ret);
+ goto card_err;
+ }
+
+ return ret;
+
+card_err:
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+pcm_err:
+ return ret;
+}
+
+/* power down chip */
+static int ad1938_remove(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int ad1938_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->card->codec;
+
+ ad1938_set_bias_level(codec, SND_SOC_BIAS_OFF);
+ return 0;
+}
+
+static int ad1938_resume(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->card->codec;
+
+ if (codec->suspend_bias_level == SND_SOC_BIAS_ON)
+ ad1938_set_bias_level(codec, SND_SOC_BIAS_ON);
+
+ return 0;
+}
+#else
+#define ad1938_suspend NULL
+#define ad1938_resume NULL
+#endif
+
+struct snd_soc_codec_device soc_codec_dev_ad1938 = {
+ .probe = ad1938_probe,
+ .remove = ad1938_remove,
+ .suspend = ad1938_suspend,
+ .resume = ad1938_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_ad1938);
+
+static int __init ad1938_init(void)
+{
+ int ret;
+
+ ret = spi_register_driver(&ad1938_spi_driver);
+ if (ret != 0) {
+ printk(KERN_ERR "Failed to register ad1938 SPI driver: %d\n",
+ ret);
+ }
+
+ return ret;
+}
+module_init(ad1938_init);
+
+static void __exit ad1938_exit(void)
+{
+ spi_unregister_driver(&ad1938_spi_driver);
+}
+module_exit(ad1938_exit);
+
+MODULE_DESCRIPTION("ASoC ad1938 driver");
+MODULE_AUTHOR("Barry Song ");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * File: sound/soc/codecs/ad1836.h
+ * Based on:
+ * Author: Barry Song <Barry.Song@analog.com>
+ *
+ * Created: May 25, 2009
+ * Description: definitions for AD1938 registers
+ *
+ * Modified:
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __AD1938_H__
+#define __AD1938_H__
+
+#define AD1938_PLL_CLK_CTRL0 0
+#define AD1938_PLL_POWERDOWN 0x01
+#define AD1938_PLL_CLK_CTRL1 1
+#define AD1938_DAC_CTRL0 2
+#define AD1938_DAC_POWERDOWN 0x01
+#define AD1938_DAC_SERFMT_MASK 0xC0
+#define AD1938_DAC_SERFMT_STEREO (0 << 6)
+#define AD1938_DAC_SERFMT_TDM (1 << 6)
+#define AD1938_DAC_CTRL1 3
+#define AD1938_DAC_2_CHANNELS 0
+#define AD1938_DAC_4_CHANNELS 1
+#define AD1938_DAC_8_CHANNELS 2
+#define AD1938_DAC_16_CHANNELS 3
+#define AD1938_DAC_CHAN_SHFT 1
+#define AD1938_DAC_CHAN_MASK (3 << AD1938_DAC_CHAN_SHFT)
+#define AD1938_DAC_LCR_MASTER (1 << 4)
+#define AD1938_DAC_BCLK_MASTER (1 << 5)
+#define AD1938_DAC_LEFT_HIGH (1 << 3)
+#define AD1938_DAC_BCLK_INV (1 << 7)
+#define AD1938_DAC_CTRL2 4
+#define AD1938_DAC_WORD_LEN_MASK 0xC
+#define AD1938_DAC_MASTER_MUTE 1
+#define AD1938_DAC_CHNL_MUTE 5
+#define AD1938_DACL1_MUTE 0
+#define AD1938_DACR1_MUTE 1
+#define AD1938_DACL2_MUTE 2
+#define AD1938_DACR2_MUTE 3
+#define AD1938_DACL3_MUTE 4
+#define AD1938_DACR3_MUTE 5
+#define AD1938_DACL4_MUTE 6
+#define AD1938_DACR4_MUTE 7
+#define AD1938_DAC_L1_VOL 6
+#define AD1938_DAC_R1_VOL 7
+#define AD1938_DAC_L2_VOL 8
+#define AD1938_DAC_R2_VOL 9
+#define AD1938_DAC_L3_VOL 10
+#define AD1938_DAC_R3_VOL 11
+#define AD1938_DAC_L4_VOL 12
+#define AD1938_DAC_R4_VOL 13
+#define AD1938_ADC_CTRL0 14
+#define AD1938_ADC_POWERDOWN 0x01
+#define AD1938_ADC_HIGHPASS_FILTER 1
+#define AD1938_ADCL1_MUTE 2
+#define AD1938_ADCR1_MUTE 3
+#define AD1938_ADCL2_MUTE 4
+#define AD1938_ADCR2_MUTE 5
+#define AD1938_ADC_CTRL1 15
+#define AD1938_ADC_SERFMT_MASK 0x60
+#define AD1938_ADC_SERFMT_STEREO (0 << 5)
+#define AD1938_ADC_SERFMT_TDM (1 << 2)
+#define AD1938_ADC_SERFMT_AUX (2 << 5)
+#define AD1938_ADC_WORD_LEN_MASK 0x3
+#define AD1938_ADC_CTRL2 16
+#define AD1938_ADC_2_CHANNELS 0
+#define AD1938_ADC_4_CHANNELS 1
+#define AD1938_ADC_8_CHANNELS 2
+#define AD1938_ADC_16_CHANNELS 3
+#define AD1938_ADC_CHAN_SHFT 4
+#define AD1938_ADC_CHAN_MASK (3 << AD1938_ADC_CHAN_SHFT)
+#define AD1938_ADC_LCR_MASTER (1 << 3)
+#define AD1938_ADC_BCLK_MASTER (1 << 6)
+#define AD1938_ADC_LEFT_HIGH (1 << 2)
+#define AD1938_ADC_BCLK_INV (1 << 1)
+
+#define AD1938_NUM_REGS 17
+
+extern struct snd_soc_dai ad1938_dai;
+extern struct snd_soc_codec_device soc_codec_dev_ad1938;
+#endif
return cache[reg];
}
-static inline unsigned int ak4535_read(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- u8 data;
- data = reg;
-
- if (codec->hw_write(codec->control_data, &data, 1) != 1)
- return -EIO;
-
- if (codec->hw_read(codec->control_data, &data, 1) != 1)
- return -EIO;
-
- return data;
-};
-
/*
* write ak4535 register cache
*/
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
if (setup->i2c_address) {
codec->hw_write = (hw_write_t)i2c_master_send;
- codec->hw_read = (hw_read_t)i2c_master_recv;
ret = ak4535_add_i2c_device(pdev, setup);
}
#endif
--- /dev/null
+/*
+ * ak4642.c -- AK4642/AK4643 ALSA Soc Audio driver
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on wm8731.c by Richard Purdie
+ * Based on ak4535.c by Richard Purdie
+ * Based on wm8753.c by Liam Girdwood
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* ** CAUTION **
+ *
+ * This is very simple driver.
+ * It can use headphone output / stereo input only
+ *
+ * AK4642 is not tested.
+ * AK4643 is tested.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+
+#include "ak4642.h"
+
+#define AK4642_VERSION "0.0.1"
+
+#define PW_MGMT1 0x00
+#define PW_MGMT2 0x01
+#define SG_SL1 0x02
+#define SG_SL2 0x03
+#define MD_CTL1 0x04
+#define MD_CTL2 0x05
+#define TIMER 0x06
+#define ALC_CTL1 0x07
+#define ALC_CTL2 0x08
+#define L_IVC 0x09
+#define L_DVC 0x0a
+#define ALC_CTL3 0x0b
+#define R_IVC 0x0c
+#define R_DVC 0x0d
+#define MD_CTL3 0x0e
+#define MD_CTL4 0x0f
+#define PW_MGMT3 0x10
+#define DF_S 0x11
+#define FIL3_0 0x12
+#define FIL3_1 0x13
+#define FIL3_2 0x14
+#define FIL3_3 0x15
+#define EQ_0 0x16
+#define EQ_1 0x17
+#define EQ_2 0x18
+#define EQ_3 0x19
+#define EQ_4 0x1a
+#define EQ_5 0x1b
+#define FIL1_0 0x1c
+#define FIL1_1 0x1d
+#define FIL1_2 0x1e
+#define FIL1_3 0x1f
+#define PW_MGMT4 0x20
+#define MD_CTL5 0x21
+#define LO_MS 0x22
+#define HP_MS 0x23
+#define SPK_MS 0x24
+
+#define AK4642_CACHEREGNUM 0x25
+
+struct snd_soc_codec_device soc_codec_dev_ak4642;
+
+/* codec private data */
+struct ak4642_priv {
+ struct snd_soc_codec codec;
+ unsigned int sysclk;
+};
+
+static struct snd_soc_codec *ak4642_codec;
+
+/*
+ * ak4642 register cache
+ */
+static const u16 ak4642_reg[AK4642_CACHEREGNUM] = {
+ 0x0000, 0x0000, 0x0001, 0x0000,
+ 0x0002, 0x0000, 0x0000, 0x0000,
+ 0x00e1, 0x00e1, 0x0018, 0x0000,
+ 0x00e1, 0x0018, 0x0011, 0x0008,
+ 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0000,
+};
+
+/*
+ * read ak4642 register cache
+ */
+static inline unsigned int ak4642_read_reg_cache(struct snd_soc_codec *codec,
+ unsigned int reg)
+{
+ u16 *cache = codec->reg_cache;
+ if (reg >= AK4642_CACHEREGNUM)
+ return -1;
+ return cache[reg];
+}
+
+/*
+ * write ak4642 register cache
+ */
+static inline void ak4642_write_reg_cache(struct snd_soc_codec *codec,
+ u16 reg, unsigned int value)
+{
+ u16 *cache = codec->reg_cache;
+ if (reg >= AK4642_CACHEREGNUM)
+ return;
+
+ cache[reg] = value;
+}
+
+/*
+ * write to the AK4642 register space
+ */
+static int ak4642_write(struct snd_soc_codec *codec, unsigned int reg,
+ unsigned int value)
+{
+ u8 data[2];
+
+ /* data is
+ * D15..D8 AK4642 register offset
+ * D7...D0 register data
+ */
+ data[0] = reg & 0xff;
+ data[1] = value & 0xff;
+
+ if (codec->hw_write(codec->control_data, data, 2) == 2) {
+ ak4642_write_reg_cache(codec, reg, value);
+ return 0;
+ } else
+ return -EIO;
+}
+
+static int ak4642_sync(struct snd_soc_codec *codec)
+{
+ u16 *cache = codec->reg_cache;
+ int i, r = 0;
+
+ for (i = 0; i < AK4642_CACHEREGNUM; i++)
+ r |= ak4642_write(codec, i, cache[i]);
+
+ return r;
+};
+
+static int ak4642_dai_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ int is_play = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
+ struct snd_soc_codec *codec = dai->codec;
+
+ if (is_play) {
+ /*
+ * start headphone output
+ *
+ * PLL, Master Mode
+ * Audio I/F Format :MSB justified (ADC & DAC)
+ * Sampling Frequency: 44.1kHz
+ * Digital Volume: −8dB
+ * Bass Boost Level : Middle
+ *
+ * This operation came from example code of
+ * "ASAHI KASEI AK4642" (japanese) manual p97.
+ *
+ * Example code use 0x39, 0x79 value for 0x01 address,
+ * But we need MCKO (0x02) bit now
+ */
+ ak4642_write(codec, 0x05, 0x27);
+ ak4642_write(codec, 0x0f, 0x09);
+ ak4642_write(codec, 0x0e, 0x19);
+ ak4642_write(codec, 0x09, 0x91);
+ ak4642_write(codec, 0x0c, 0x91);
+ ak4642_write(codec, 0x0a, 0x28);
+ ak4642_write(codec, 0x0d, 0x28);
+ ak4642_write(codec, 0x00, 0x64);
+ ak4642_write(codec, 0x01, 0x3b); /* + MCKO bit */
+ ak4642_write(codec, 0x01, 0x7b); /* + MCKO bit */
+ } else {
+ /*
+ * start stereo input
+ *
+ * PLL Master Mode
+ * Audio I/F Format:MSB justified (ADC & DAC)
+ * Sampling Frequency:44.1kHz
+ * Pre MIC AMP:+20dB
+ * MIC Power On
+ * ALC setting:Refer to Table 35
+ * ALC bit=“1”
+ *
+ * This operation came from example code of
+ * "ASAHI KASEI AK4642" (japanese) manual p94.
+ */
+ ak4642_write(codec, 0x05, 0x27);
+ ak4642_write(codec, 0x02, 0x05);
+ ak4642_write(codec, 0x06, 0x3c);
+ ak4642_write(codec, 0x08, 0xe1);
+ ak4642_write(codec, 0x0b, 0x00);
+ ak4642_write(codec, 0x07, 0x21);
+ ak4642_write(codec, 0x00, 0x41);
+ ak4642_write(codec, 0x10, 0x01);
+ }
+
+ return 0;
+}
+
+static void ak4642_dai_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ int is_play = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
+ struct snd_soc_codec *codec = dai->codec;
+
+ if (is_play) {
+ /* stop headphone output */
+ ak4642_write(codec, 0x01, 0x3b);
+ ak4642_write(codec, 0x01, 0x0b);
+ ak4642_write(codec, 0x00, 0x40);
+ ak4642_write(codec, 0x0e, 0x11);
+ ak4642_write(codec, 0x0f, 0x08);
+ } else {
+ /* stop stereo input */
+ ak4642_write(codec, 0x00, 0x40);
+ ak4642_write(codec, 0x10, 0x00);
+ ak4642_write(codec, 0x07, 0x01);
+ }
+}
+
+static int ak4642_dai_set_sysclk(struct snd_soc_dai *codec_dai,
+ int clk_id, unsigned int freq, int dir)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ struct ak4642_priv *ak4642 = codec->private_data;
+
+ ak4642->sysclk = freq;
+ return 0;
+}
+
+static struct snd_soc_dai_ops ak4642_dai_ops = {
+ .startup = ak4642_dai_startup,
+ .shutdown = ak4642_dai_shutdown,
+ .set_sysclk = ak4642_dai_set_sysclk,
+};
+
+struct snd_soc_dai ak4642_dai = {
+ .name = "AK4642",
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_8000_48000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE },
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_8000_48000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE },
+ .ops = &ak4642_dai_ops,
+};
+EXPORT_SYMBOL_GPL(ak4642_dai);
+
+static int ak4642_resume(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->card->codec;
+
+ ak4642_sync(codec);
+ return 0;
+}
+
+/*
+ * initialise the AK4642 driver
+ * register the mixer and dsp interfaces with the kernel
+ */
+static int ak4642_init(struct ak4642_priv *ak4642)
+{
+ struct snd_soc_codec *codec = &ak4642->codec;
+ int ret = 0;
+
+ if (ak4642_codec) {
+ dev_err(codec->dev, "Another ak4642 is registered\n");
+ return -EINVAL;
+ }
+
+ mutex_init(&codec->mutex);
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
+
+ codec->private_data = ak4642;
+ codec->name = "AK4642";
+ codec->owner = THIS_MODULE;
+ codec->read = ak4642_read_reg_cache;
+ codec->write = ak4642_write;
+ codec->dai = &ak4642_dai;
+ codec->num_dai = 1;
+ codec->hw_write = (hw_write_t)i2c_master_send;
+ codec->reg_cache_size = ARRAY_SIZE(ak4642_reg);
+ codec->reg_cache = kmemdup(ak4642_reg,
+ sizeof(ak4642_reg), GFP_KERNEL);
+
+ if (!codec->reg_cache)
+ return -ENOMEM;
+
+ ak4642_dai.dev = codec->dev;
+ ak4642_codec = codec;
+
+ ret = snd_soc_register_codec(codec);
+ if (ret) {
+ dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+ goto reg_cache_err;
+ }
+
+ ret = snd_soc_register_dai(&ak4642_dai);
+ if (ret) {
+ dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
+ snd_soc_unregister_codec(codec);
+ goto reg_cache_err;
+ }
+
+ /*
+ * clock setting
+ *
+ * Audio I/F Format: MSB justified (ADC & DAC)
+ * BICK frequency at Master Mode: 64fs
+ * Input Master Clock Select at PLL Mode: 11.2896MHz
+ * MCKO: Enable
+ * Sampling Frequency: 44.1kHz
+ *
+ * This operation came from example code of
+ * "ASAHI KASEI AK4642" (japanese) manual p89.
+ *
+ * please fix-me
+ */
+ ak4642_write(codec, 0x01, 0x08);
+ ak4642_write(codec, 0x04, 0x4a);
+ ak4642_write(codec, 0x05, 0x27);
+ ak4642_write(codec, 0x00, 0x40);
+ ak4642_write(codec, 0x01, 0x0b);
+
+ return ret;
+
+reg_cache_err:
+ kfree(codec->reg_cache);
+ codec->reg_cache = NULL;
+
+ return ret;
+}
+
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+static int ak4642_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct ak4642_priv *ak4642;
+ struct snd_soc_codec *codec;
+ int ret;
+
+ ak4642 = kzalloc(sizeof(struct ak4642_priv), GFP_KERNEL);
+ if (!ak4642)
+ return -ENOMEM;
+
+ codec = &ak4642->codec;
+ codec->dev = &i2c->dev;
+
+ i2c_set_clientdata(i2c, ak4642);
+ codec->control_data = i2c;
+
+ ret = ak4642_init(ak4642);
+ if (ret < 0)
+ printk(KERN_ERR "failed to initialise AK4642\n");
+
+ return ret;
+}
+
+static int ak4642_i2c_remove(struct i2c_client *client)
+{
+ struct ak4642_priv *ak4642 = i2c_get_clientdata(client);
+
+ snd_soc_unregister_dai(&ak4642_dai);
+ snd_soc_unregister_codec(&ak4642->codec);
+ kfree(ak4642->codec.reg_cache);
+ kfree(ak4642);
+ ak4642_codec = NULL;
+
+ return 0;
+}
+
+static const struct i2c_device_id ak4642_i2c_id[] = {
+ { "ak4642", 0 },
+ { "ak4643", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ak4642_i2c_id);
+
+static struct i2c_driver ak4642_i2c_driver = {
+ .driver = {
+ .name = "AK4642 I2C Codec",
+ .owner = THIS_MODULE,
+ },
+ .probe = ak4642_i2c_probe,
+ .remove = ak4642_i2c_remove,
+ .id_table = ak4642_i2c_id,
+};
+
+#endif
+
+static int ak4642_probe(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ int ret;
+
+ if (!ak4642_codec) {
+ dev_err(&pdev->dev, "Codec device not registered\n");
+ return -ENODEV;
+ }
+
+ socdev->card->codec = ak4642_codec;
+
+ /* register pcms */
+ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+ if (ret < 0) {
+ printk(KERN_ERR "ak4642: failed to create pcms\n");
+ goto pcm_err;
+ }
+
+ ret = snd_soc_init_card(socdev);
+ if (ret < 0) {
+ printk(KERN_ERR "ak4642: failed to register card\n");
+ goto card_err;
+ }
+
+ dev_info(&pdev->dev, "AK4642 Audio Codec %s", AK4642_VERSION);
+ return ret;
+
+card_err:
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+pcm_err:
+ return ret;
+
+}
+
+/* power down chip */
+static int ak4642_remove(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+
+ return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_ak4642 = {
+ .probe = ak4642_probe,
+ .remove = ak4642_remove,
+ .resume = ak4642_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_ak4642);
+
+static int __init ak4642_modinit(void)
+{
+ int ret;
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+ ret = i2c_add_driver(&ak4642_i2c_driver);
+#endif
+ return ret;
+
+}
+module_init(ak4642_modinit);
+
+static void __exit ak4642_exit(void)
+{
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+ i2c_del_driver(&ak4642_i2c_driver);
+#endif
+
+}
+module_exit(ak4642_exit);
+
+MODULE_DESCRIPTION("Soc AK4642 driver");
+MODULE_AUTHOR("Kuninori Morimoto <morimoto.kuninori@renesas.com>");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * ak4642.h -- AK4642 Soc Audio driver
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on ak4535.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _AK4642_H
+#define _AK4642_H
+
+extern struct snd_soc_dai ak4642_dai;
+extern struct snd_soc_codec_device soc_codec_dev_ak4642;
+
+#endif
{
struct cs4270_private *cs4270 = i2c_get_clientdata(client);
struct snd_soc_codec *codec = &cs4270->codec;
- int reg = snd_soc_read(codec, CS4270_PWRCTL) | CS4270_PWRCTL_PDN_ALL;
- return snd_soc_write(codec, CS4270_PWRCTL, reg);
+ return snd_soc_suspend_device(codec->dev);
}
static int cs4270_i2c_resume(struct i2c_client *client)
{
struct cs4270_private *cs4270 = i2c_get_clientdata(client);
struct snd_soc_codec *codec = &cs4270->codec;
+
+ return snd_soc_resume_device(codec->dev);
+}
+
+static int cs4270_soc_suspend(struct platform_device *pdev, pm_message_t mesg)
+{
+ struct snd_soc_codec *codec = cs4270_codec;
+ int reg = snd_soc_read(codec, CS4270_PWRCTL) | CS4270_PWRCTL_PDN_ALL;
+
+ return snd_soc_write(codec, CS4270_PWRCTL, reg);
+}
+
+static int cs4270_soc_resume(struct platform_device *pdev)
+{
+ struct snd_soc_codec *codec = cs4270_codec;
+ struct i2c_client *i2c_client = codec->control_data;
int reg;
/* In case the device was put to hard reset during sleep, we need to
for (reg = CS4270_FIRSTREG; reg <= CS4270_LASTREG; reg++) {
u8 val = snd_soc_read(codec, reg);
- if (i2c_smbus_write_byte_data(client, reg, val)) {
+ if (i2c_smbus_write_byte_data(i2c_client, reg, val)) {
dev_err(codec->dev, "i2c write failed\n");
return -EIO;
}
#else
#define cs4270_i2c_suspend NULL
#define cs4270_i2c_resume NULL
+#define cs4270_soc_suspend NULL
+#define cs4270_soc_resume NULL
#endif /* CONFIG_PM */
/*
*/
struct snd_soc_codec_device soc_codec_device_cs4270 = {
.probe = cs4270_probe,
- .remove = cs4270_remove
+ .remove = cs4270_remove,
+ .suspend = cs4270_soc_suspend,
+ .resume = cs4270_soc_resume,
};
EXPORT_SYMBOL_GPL(soc_codec_device_cs4270);
--- /dev/null
+/*
+ * cx20442.c -- CX20442 ALSA Soc Audio driver
+ *
+ * Copyright 2009 Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
+ *
+ * Initially based on sound/soc/codecs/wm8400.c
+ * Copyright 2008, 2009 Wolfson Microelectronics PLC.
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/tty.h>
+
+#include <sound/core.h>
+#include <sound/initval.h>
+#include <sound/soc-dapm.h>
+
+#include "cx20442.h"
+
+
+struct cx20442_priv {
+ struct snd_soc_codec codec;
+ u8 reg_cache[1];
+};
+
+#define CX20442_PM 0x0
+
+#define CX20442_TELIN 0
+#define CX20442_TELOUT 1
+#define CX20442_MIC 2
+#define CX20442_SPKOUT 3
+#define CX20442_AGC 4
+
+static const struct snd_soc_dapm_widget cx20442_dapm_widgets[] = {
+ SND_SOC_DAPM_OUTPUT("TELOUT"),
+ SND_SOC_DAPM_OUTPUT("SPKOUT"),
+ SND_SOC_DAPM_OUTPUT("AGCOUT"),
+
+ SND_SOC_DAPM_MIXER("SPKOUT Mixer", SND_SOC_NOPM, 0, 0, NULL, 0),
+
+ SND_SOC_DAPM_PGA("TELOUT Amp", CX20442_PM, CX20442_TELOUT, 0, NULL, 0),
+ SND_SOC_DAPM_PGA("SPKOUT Amp", CX20442_PM, CX20442_SPKOUT, 0, NULL, 0),
+ SND_SOC_DAPM_PGA("SPKOUT AGC", CX20442_PM, CX20442_AGC, 0, NULL, 0),
+
+ SND_SOC_DAPM_DAC("DAC", "Playback", SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_ADC("ADC", "Capture", SND_SOC_NOPM, 0, 0),
+
+ SND_SOC_DAPM_MIXER("Input Mixer", SND_SOC_NOPM, 0, 0, NULL, 0),
+
+ SND_SOC_DAPM_MICBIAS("TELIN Bias", CX20442_PM, CX20442_TELIN, 0),
+ SND_SOC_DAPM_MICBIAS("MIC Bias", CX20442_PM, CX20442_MIC, 0),
+
+ SND_SOC_DAPM_PGA("MIC AGC", CX20442_PM, CX20442_AGC, 0, NULL, 0),
+
+ SND_SOC_DAPM_INPUT("TELIN"),
+ SND_SOC_DAPM_INPUT("MIC"),
+ SND_SOC_DAPM_INPUT("AGCIN"),
+};
+
+static const struct snd_soc_dapm_route cx20442_audio_map[] = {
+ {"TELOUT", NULL, "TELOUT Amp"},
+
+ {"SPKOUT", NULL, "SPKOUT Mixer"},
+ {"SPKOUT Mixer", NULL, "SPKOUT Amp"},
+
+ {"TELOUT Amp", NULL, "DAC"},
+ {"SPKOUT Amp", NULL, "DAC"},
+
+ {"SPKOUT Mixer", NULL, "SPKOUT AGC"},
+ {"SPKOUT AGC", NULL, "AGCIN"},
+
+ {"AGCOUT", NULL, "MIC AGC"},
+ {"MIC AGC", NULL, "MIC"},
+
+ {"MIC Bias", NULL, "MIC"},
+ {"Input Mixer", NULL, "MIC Bias"},
+
+ {"TELIN Bias", NULL, "TELIN"},
+ {"Input Mixer", NULL, "TELIN Bias"},
+
+ {"ADC", NULL, "Input Mixer"},
+};
+
+static int cx20442_add_widgets(struct snd_soc_codec *codec)
+{
+ snd_soc_dapm_new_controls(codec, cx20442_dapm_widgets,
+ ARRAY_SIZE(cx20442_dapm_widgets));
+
+ snd_soc_dapm_add_routes(codec, cx20442_audio_map,
+ ARRAY_SIZE(cx20442_audio_map));
+
+ snd_soc_dapm_new_widgets(codec);
+ return 0;
+}
+
+static unsigned int cx20442_read_reg_cache(struct snd_soc_codec *codec,
+ unsigned int reg)
+{
+ u8 *reg_cache = codec->reg_cache;
+
+ if (reg >= codec->reg_cache_size)
+ return -EINVAL;
+
+ return reg_cache[reg];
+}
+
+enum v253_vls {
+ V253_VLS_NONE = 0,
+ V253_VLS_T,
+ V253_VLS_L,
+ V253_VLS_LT,
+ V253_VLS_S,
+ V253_VLS_ST,
+ V253_VLS_M,
+ V253_VLS_MST,
+ V253_VLS_S1,
+ V253_VLS_S1T,
+ V253_VLS_MS1T,
+ V253_VLS_M1,
+ V253_VLS_M1ST,
+ V253_VLS_M1S1T,
+ V253_VLS_H,
+ V253_VLS_HT,
+ V253_VLS_MS,
+ V253_VLS_MS1,
+ V253_VLS_M1S,
+ V253_VLS_M1S1,
+ V253_VLS_TEST,
+};
+
+static int cx20442_pm_to_v253_vls(u8 value)
+{
+ switch (value & ~(1 << CX20442_AGC)) {
+ case 0:
+ return V253_VLS_T;
+ case (1 << CX20442_SPKOUT):
+ case (1 << CX20442_MIC):
+ case (1 << CX20442_SPKOUT) | (1 << CX20442_MIC):
+ return V253_VLS_M1S1;
+ case (1 << CX20442_TELOUT):
+ case (1 << CX20442_TELIN):
+ case (1 << CX20442_TELOUT) | (1 << CX20442_TELIN):
+ return V253_VLS_L;
+ case (1 << CX20442_TELOUT) | (1 << CX20442_MIC):
+ return V253_VLS_NONE;
+ }
+ return -EINVAL;
+}
+static int cx20442_pm_to_v253_vsp(u8 value)
+{
+ switch (value & ~(1 << CX20442_AGC)) {
+ case (1 << CX20442_SPKOUT):
+ case (1 << CX20442_MIC):
+ case (1 << CX20442_SPKOUT) | (1 << CX20442_MIC):
+ return (bool)(value & (1 << CX20442_AGC));
+ }
+ return (value & (1 << CX20442_AGC)) ? -EINVAL : 0;
+}
+
+static int cx20442_write(struct snd_soc_codec *codec, unsigned int reg,
+ unsigned int value)
+{
+ u8 *reg_cache = codec->reg_cache;
+ int vls, vsp, old, len;
+ char buf[18];
+
+ if (reg >= codec->reg_cache_size)
+ return -EINVAL;
+
+ /* hw_write and control_data pointers required for talking to the modem
+ * are expected to be set by the line discipline initialization code */
+ if (!codec->hw_write || !codec->control_data)
+ return -EIO;
+
+ old = reg_cache[reg];
+ reg_cache[reg] = value;
+
+ vls = cx20442_pm_to_v253_vls(value);
+ if (vls < 0)
+ return vls;
+
+ vsp = cx20442_pm_to_v253_vsp(value);
+ if (vsp < 0)
+ return vsp;
+
+ if ((vls == V253_VLS_T) ||
+ (vls == cx20442_pm_to_v253_vls(old))) {
+ if (vsp == cx20442_pm_to_v253_vsp(old))
+ return 0;
+ len = snprintf(buf, ARRAY_SIZE(buf), "at+vsp=%d\r", vsp);
+ } else if (vsp == cx20442_pm_to_v253_vsp(old))
+ len = snprintf(buf, ARRAY_SIZE(buf), "at+vls=%d\r", vls);
+ else
+ len = snprintf(buf, ARRAY_SIZE(buf),
+ "at+vls=%d;+vsp=%d\r", vls, vsp);
+
+ if (unlikely(len > (ARRAY_SIZE(buf) - 1)))
+ return -ENOMEM;
+
+ dev_dbg(codec->dev, "%s: %s\n", __func__, buf);
+ if (codec->hw_write(codec->control_data, buf, len) != len)
+ return -EIO;
+
+ return 0;
+}
+
+
+/* Moved up here as line discipline referres it during initialization */
+static struct snd_soc_codec *cx20442_codec;
+
+
+/*
+ * Line discpline related code
+ *
+ * Any of the callback functions below can be used in two ways:
+ * 1) registerd by a machine driver as one of line discipline operations,
+ * 2) called from a machine's provided line discipline callback function
+ * in case when extra machine specific code must be run as well.
+ */
+
+/* Modem init: echo off, digital speaker off, quiet off, voice mode */
+static const char *v253_init = "ate0m0q0+fclass=8\r";
+
+/* Line discipline .open() */
+static int v253_open(struct tty_struct *tty)
+{
+ struct snd_soc_codec *codec = cx20442_codec;
+ int ret, len = strlen(v253_init);
+
+ /* Doesn't make sense without write callback */
+ if (!tty->ops->write)
+ return -EINVAL;
+
+ /* Pass the codec structure address for use by other ldisc callbacks */
+ tty->disc_data = codec;
+
+ if (tty->ops->write(tty, v253_init, len) != len) {
+ ret = -EIO;
+ goto err;
+ }
+ /* Actual setup will be performed after the modem responds. */
+ return 0;
+err:
+ tty->disc_data = NULL;
+ return ret;
+}
+
+/* Line discipline .close() */
+static void v253_close(struct tty_struct *tty)
+{
+ struct snd_soc_codec *codec = tty->disc_data;
+
+ tty->disc_data = NULL;
+
+ if (!codec)
+ return;
+
+ /* Prevent the codec driver from further accessing the modem */
+ codec->hw_write = NULL;
+ codec->control_data = NULL;
+ codec->pop_time = 0;
+}
+
+/* Line discipline .hangup() */
+static int v253_hangup(struct tty_struct *tty)
+{
+ v253_close(tty);
+ return 0;
+}
+
+/* Line discipline .receive_buf() */
+static void v253_receive(struct tty_struct *tty,
+ const unsigned char *cp, char *fp, int count)
+{
+ struct snd_soc_codec *codec = tty->disc_data;
+
+ if (!codec)
+ return;
+
+ if (!codec->control_data) {
+ /* First modem response, complete setup procedure */
+
+ /* Set up codec driver access to modem controls */
+ codec->control_data = tty;
+ codec->hw_write = (hw_write_t)tty->ops->write;
+ codec->pop_time = 1;
+ }
+}
+
+/* Line discipline .write_wakeup() */
+static void v253_wakeup(struct tty_struct *tty)
+{
+}
+
+struct tty_ldisc_ops v253_ops = {
+ .magic = TTY_LDISC_MAGIC,
+ .name = "cx20442",
+ .owner = THIS_MODULE,
+ .open = v253_open,
+ .close = v253_close,
+ .hangup = v253_hangup,
+ .receive_buf = v253_receive,
+ .write_wakeup = v253_wakeup,
+};
+EXPORT_SYMBOL_GPL(v253_ops);
+
+
+/*
+ * Codec DAI
+ */
+
+struct snd_soc_dai cx20442_dai = {
+ .name = "CX20442",
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 1,
+ .channels_max = 1,
+ .rates = SNDRV_PCM_RATE_8000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ },
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 1,
+ .channels_max = 1,
+ .rates = SNDRV_PCM_RATE_8000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ },
+};
+EXPORT_SYMBOL_GPL(cx20442_dai);
+
+static int cx20442_codec_probe(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec;
+ int ret;
+
+ if (!cx20442_codec) {
+ dev_err(&pdev->dev, "cx20442 not yet discovered\n");
+ return -ENODEV;
+ }
+ codec = cx20442_codec;
+
+ socdev->card->codec = codec;
+
+ /* register pcms */
+ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to create pcms\n");
+ goto pcm_err;
+ }
+
+ cx20442_add_widgets(codec);
+
+ ret = snd_soc_init_card(socdev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to register card\n");
+ goto card_err;
+ }
+
+ return ret;
+
+card_err:
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+pcm_err:
+ return ret;
+}
+
+/* power down chip */
+static int cx20442_codec_remove(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+
+ return 0;
+}
+
+struct snd_soc_codec_device cx20442_codec_dev = {
+ .probe = cx20442_codec_probe,
+ .remove = cx20442_codec_remove,
+};
+EXPORT_SYMBOL_GPL(cx20442_codec_dev);
+
+static int cx20442_register(struct cx20442_priv *cx20442)
+{
+ struct snd_soc_codec *codec = &cx20442->codec;
+ int ret;
+
+ mutex_init(&codec->mutex);
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
+
+ codec->name = "CX20442";
+ codec->owner = THIS_MODULE;
+ codec->private_data = cx20442;
+
+ codec->dai = &cx20442_dai;
+ codec->num_dai = 1;
+
+ codec->reg_cache = &cx20442->reg_cache;
+ codec->reg_cache_size = ARRAY_SIZE(cx20442->reg_cache);
+ codec->read = cx20442_read_reg_cache;
+ codec->write = cx20442_write;
+
+ codec->bias_level = SND_SOC_BIAS_OFF;
+
+ cx20442_dai.dev = codec->dev;
+
+ cx20442_codec = codec;
+
+ ret = snd_soc_register_codec(codec);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+ goto err;
+ }
+
+ ret = snd_soc_register_dai(&cx20442_dai);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
+ goto err_codec;
+ }
+
+ return 0;
+
+err_codec:
+ snd_soc_unregister_codec(codec);
+err:
+ cx20442_codec = NULL;
+ kfree(cx20442);
+ return ret;
+}
+
+static void cx20442_unregister(struct cx20442_priv *cx20442)
+{
+ snd_soc_unregister_dai(&cx20442_dai);
+ snd_soc_unregister_codec(&cx20442->codec);
+
+ cx20442_codec = NULL;
+ kfree(cx20442);
+}
+
+static int cx20442_platform_probe(struct platform_device *pdev)
+{
+ struct cx20442_priv *cx20442;
+ struct snd_soc_codec *codec;
+
+ cx20442 = kzalloc(sizeof(struct cx20442_priv), GFP_KERNEL);
+ if (cx20442 == NULL)
+ return -ENOMEM;
+
+ codec = &cx20442->codec;
+
+ codec->control_data = NULL;
+ codec->hw_write = NULL;
+ codec->pop_time = 0;
+
+ codec->dev = &pdev->dev;
+ platform_set_drvdata(pdev, cx20442);
+
+ return cx20442_register(cx20442);
+}
+
+static int __exit cx20442_platform_remove(struct platform_device *pdev)
+{
+ struct cx20442_priv *cx20442 = platform_get_drvdata(pdev);
+
+ cx20442_unregister(cx20442);
+ return 0;
+}
+
+static struct platform_driver cx20442_platform_driver = {
+ .driver = {
+ .name = "cx20442",
+ .owner = THIS_MODULE,
+ },
+ .probe = cx20442_platform_probe,
+ .remove = __exit_p(cx20442_platform_remove),
+};
+
+static int __init cx20442_init(void)
+{
+ return platform_driver_register(&cx20442_platform_driver);
+}
+module_init(cx20442_init);
+
+static void __exit cx20442_exit(void)
+{
+ platform_driver_unregister(&cx20442_platform_driver);
+}
+module_exit(cx20442_exit);
+
+MODULE_DESCRIPTION("ASoC CX20442-11 voice modem codec driver");
+MODULE_AUTHOR("Janusz Krzysztofik");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:cx20442");
--- /dev/null
+/*
+ * cx20442.h -- audio driver for CX20442
+ *
+ * Copyright 2009 Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef _CX20442_CODEC_H
+#define _CX20442_CODEC_H
+
+extern struct snd_soc_dai cx20442_dai;
+extern struct snd_soc_codec_device cx20442_codec_dev;
+extern struct tty_ldisc_ops v253_ops;
+
+#endif
--- /dev/null
+/*
+ * max9877.c -- amp driver for max9877
+ *
+ * Copyright (C) 2009 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <sound/soc.h>
+#include <sound/tlv.h>
+
+#include "max9877.h"
+
+static struct i2c_client *i2c;
+
+static u8 max9877_regs[5] = { 0x40, 0x00, 0x00, 0x00, 0x49 };
+
+static void max9877_write_regs(void)
+{
+ unsigned int i;
+ u8 data[6];
+
+ data[0] = MAX9877_INPUT_MODE;
+ for (i = 0; i < ARRAY_SIZE(max9877_regs); i++)
+ data[i + 1] = max9877_regs[i];
+
+ if (i2c_master_send(i2c, data, 6) != 6)
+ dev_err(&i2c->dev, "i2c write failed\n");
+}
+
+static int max9877_get_reg(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
+ unsigned int reg = mc->reg;
+ unsigned int shift = mc->shift;
+ unsigned int mask = mc->max;
+ unsigned int invert = mc->invert;
+
+ ucontrol->value.integer.value[0] = (max9877_regs[reg] >> shift) & mask;
+
+ if (invert)
+ ucontrol->value.integer.value[0] =
+ mask - ucontrol->value.integer.value[0];
+
+ return 0;
+}
+
+static int max9877_set_reg(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
+ unsigned int reg = mc->reg;
+ unsigned int shift = mc->shift;
+ unsigned int mask = mc->max;
+ unsigned int invert = mc->invert;
+ unsigned int val = (ucontrol->value.integer.value[0] & mask);
+
+ if (invert)
+ val = mask - val;
+
+ if (((max9877_regs[reg] >> shift) & mask) == val)
+ return 0;
+
+ max9877_regs[reg] &= ~(mask << shift);
+ max9877_regs[reg] |= val << shift;
+ max9877_write_regs();
+
+ return 1;
+}
+
+static int max9877_get_2reg(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
+ unsigned int reg = mc->reg;
+ unsigned int reg2 = mc->rreg;
+ unsigned int shift = mc->shift;
+ unsigned int mask = mc->max;
+
+ ucontrol->value.integer.value[0] = (max9877_regs[reg] >> shift) & mask;
+ ucontrol->value.integer.value[1] = (max9877_regs[reg2] >> shift) & mask;
+
+ return 0;
+}
+
+static int max9877_set_2reg(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
+ unsigned int reg = mc->reg;
+ unsigned int reg2 = mc->rreg;
+ unsigned int shift = mc->shift;
+ unsigned int mask = mc->max;
+ unsigned int val = (ucontrol->value.integer.value[0] & mask);
+ unsigned int val2 = (ucontrol->value.integer.value[1] & mask);
+ unsigned int change = 1;
+
+ if (((max9877_regs[reg] >> shift) & mask) == val)
+ change = 0;
+
+ if (((max9877_regs[reg2] >> shift) & mask) == val2)
+ change = 0;
+
+ if (change) {
+ max9877_regs[reg] &= ~(mask << shift);
+ max9877_regs[reg] |= val << shift;
+ max9877_regs[reg2] &= ~(mask << shift);
+ max9877_regs[reg2] |= val2 << shift;
+ max9877_write_regs();
+ }
+
+ return change;
+}
+
+static int max9877_get_out_mode(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ u8 value = max9877_regs[MAX9877_OUTPUT_MODE] & MAX9877_OUTMODE_MASK;
+
+ if (value)
+ value -= 1;
+
+ ucontrol->value.integer.value[0] = value;
+ return 0;
+}
+
+static int max9877_set_out_mode(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ u8 value = ucontrol->value.integer.value[0];
+
+ value += 1;
+
+ if ((max9877_regs[MAX9877_OUTPUT_MODE] & MAX9877_OUTMODE_MASK) == value)
+ return 0;
+
+ max9877_regs[MAX9877_OUTPUT_MODE] &= ~MAX9877_OUTMODE_MASK;
+ max9877_regs[MAX9877_OUTPUT_MODE] |= value;
+ max9877_write_regs();
+ return 1;
+}
+
+static int max9877_get_osc_mode(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ u8 value = (max9877_regs[MAX9877_OUTPUT_MODE] & MAX9877_OSC_MASK);
+
+ value = value >> MAX9877_OSC_OFFSET;
+
+ ucontrol->value.integer.value[0] = value;
+ return 0;
+}
+
+static int max9877_set_osc_mode(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ u8 value = ucontrol->value.integer.value[0];
+
+ value = value << MAX9877_OSC_OFFSET;
+ if ((max9877_regs[MAX9877_OUTPUT_MODE] & MAX9877_OSC_MASK) == value)
+ return 0;
+
+ max9877_regs[MAX9877_OUTPUT_MODE] &= ~MAX9877_OSC_MASK;
+ max9877_regs[MAX9877_OUTPUT_MODE] |= value;
+ max9877_write_regs();
+ return 1;
+}
+
+static const unsigned int max9877_pgain_tlv[] = {
+ TLV_DB_RANGE_HEAD(2),
+ 0, 1, TLV_DB_SCALE_ITEM(0, 900, 0),
+ 2, 2, TLV_DB_SCALE_ITEM(2000, 0, 0),
+};
+
+static const unsigned int max9877_output_tlv[] = {
+ TLV_DB_RANGE_HEAD(4),
+ 0, 7, TLV_DB_SCALE_ITEM(-7900, 400, 1),
+ 8, 15, TLV_DB_SCALE_ITEM(-4700, 300, 0),
+ 16, 23, TLV_DB_SCALE_ITEM(-2300, 200, 0),
+ 24, 31, TLV_DB_SCALE_ITEM(-700, 100, 0),
+};
+
+static const char *max9877_out_mode[] = {
+ "INA -> SPK",
+ "INA -> HP",
+ "INA -> SPK and HP",
+ "INB -> SPK",
+ "INB -> HP",
+ "INB -> SPK and HP",
+ "INA + INB -> SPK",
+ "INA + INB -> HP",
+ "INA + INB -> SPK and HP",
+};
+
+static const char *max9877_osc_mode[] = {
+ "1176KHz",
+ "1100KHz",
+ "700KHz",
+};
+
+static const struct soc_enum max9877_enum[] = {
+ SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(max9877_out_mode), max9877_out_mode),
+ SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(max9877_osc_mode), max9877_osc_mode),
+};
+
+static const struct snd_kcontrol_new max9877_controls[] = {
+ SOC_SINGLE_EXT_TLV("MAX9877 PGAINA Playback Volume",
+ MAX9877_INPUT_MODE, 0, 2, 0,
+ max9877_get_reg, max9877_set_reg, max9877_pgain_tlv),
+ SOC_SINGLE_EXT_TLV("MAX9877 PGAINB Playback Volume",
+ MAX9877_INPUT_MODE, 2, 2, 0,
+ max9877_get_reg, max9877_set_reg, max9877_pgain_tlv),
+ SOC_SINGLE_EXT_TLV("MAX9877 Amp Speaker Playback Volume",
+ MAX9877_SPK_VOLUME, 0, 31, 0,
+ max9877_get_reg, max9877_set_reg, max9877_output_tlv),
+ SOC_DOUBLE_R_EXT_TLV("MAX9877 Amp HP Playback Volume",
+ MAX9877_HPL_VOLUME, MAX9877_HPR_VOLUME, 0, 31, 0,
+ max9877_get_2reg, max9877_set_2reg, max9877_output_tlv),
+ SOC_SINGLE_EXT("MAX9877 INB Stereo Switch",
+ MAX9877_INPUT_MODE, 4, 1, 1,
+ max9877_get_reg, max9877_set_reg),
+ SOC_SINGLE_EXT("MAX9877 INA Stereo Switch",
+ MAX9877_INPUT_MODE, 5, 1, 1,
+ max9877_get_reg, max9877_set_reg),
+ SOC_SINGLE_EXT("MAX9877 Zero-crossing detection Switch",
+ MAX9877_INPUT_MODE, 6, 1, 0,
+ max9877_get_reg, max9877_set_reg),
+ SOC_SINGLE_EXT("MAX9877 Bypass Mode Switch",
+ MAX9877_OUTPUT_MODE, 6, 1, 0,
+ max9877_get_reg, max9877_set_reg),
+ SOC_SINGLE_EXT("MAX9877 Shutdown Mode Switch",
+ MAX9877_OUTPUT_MODE, 7, 1, 1,
+ max9877_get_reg, max9877_set_reg),
+ SOC_ENUM_EXT("MAX9877 Output Mode", max9877_enum[0],
+ max9877_get_out_mode, max9877_set_out_mode),
+ SOC_ENUM_EXT("MAX9877 Oscillator Mode", max9877_enum[1],
+ max9877_get_osc_mode, max9877_set_osc_mode),
+};
+
+/* This function is called from ASoC machine driver */
+int max9877_add_controls(struct snd_soc_codec *codec)
+{
+ return snd_soc_add_controls(codec, max9877_controls,
+ ARRAY_SIZE(max9877_controls));
+}
+EXPORT_SYMBOL_GPL(max9877_add_controls);
+
+static int __devinit max9877_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ i2c = client;
+
+ max9877_write_regs();
+
+ return 0;
+}
+
+static __devexit int max9877_i2c_remove(struct i2c_client *client)
+{
+ i2c = NULL;
+
+ return 0;
+}
+
+static const struct i2c_device_id max9877_i2c_id[] = {
+ { "max9877", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, max9877_i2c_id);
+
+static struct i2c_driver max9877_i2c_driver = {
+ .driver = {
+ .name = "max9877",
+ .owner = THIS_MODULE,
+ },
+ .probe = max9877_i2c_probe,
+ .remove = __devexit_p(max9877_i2c_remove),
+ .id_table = max9877_i2c_id,
+};
+
+static int __init max9877_init(void)
+{
+ return i2c_add_driver(&max9877_i2c_driver);
+}
+module_init(max9877_init);
+
+static void __exit max9877_exit(void)
+{
+ i2c_del_driver(&max9877_i2c_driver);
+}
+module_exit(max9877_exit);
+
+MODULE_DESCRIPTION("ASoC MAX9877 amp driver");
+MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * max9877.h -- amp driver for max9877
+ *
+ * Copyright (C) 2009 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef _MAX9877_H
+#define _MAX9877_H
+
+#define MAX9877_INPUT_MODE 0x00
+#define MAX9877_SPK_VOLUME 0x01
+#define MAX9877_HPL_VOLUME 0x02
+#define MAX9877_HPR_VOLUME 0x03
+#define MAX9877_OUTPUT_MODE 0x04
+
+/* MAX9877_INPUT_MODE */
+#define MAX9877_INB (1 << 4)
+#define MAX9877_INA (1 << 5)
+#define MAX9877_ZCD (1 << 6)
+
+/* MAX9877_OUTPUT_MODE */
+#define MAX9877_OUTMODE_MASK (15 << 0)
+#define MAX9877_OSC_MASK (3 << 4)
+#define MAX9877_OSC_OFFSET 4
+#define MAX9877_BYPASS (1 << 6)
+#define MAX9877_SHDN (1 << 7)
+
+extern int max9877_add_controls(struct snd_soc_codec *codec);
+
+#endif
#include "spdif_transciever.h"
+MODULE_LICENSE("GPL");
+
#define STUB_RATES SNDRV_PCM_RATE_8000_96000
#define STUB_FORMATS SNDRV_PCM_FMTBIT_S16_LE
.formats = STUB_FORMATS,
},
};
+EXPORT_SYMBOL_GPL(dit_stub_dai);
static int spdif_dit_probe(struct platform_device *pdev)
{
stac9766_ac97_write(codec, AC97_INT_PAGING, 1);
return 0;
}
- if (reg / 2 > ARRAY_SIZE(stac9766_reg))
+ if (reg / 2 >= ARRAY_SIZE(stac9766_reg))
return -EIO;
soc_ac97_ops.write(codec->ac97, reg, val);
stac9766_ac97_write(codec, AC97_INT_PAGING, 1);
return val;
}
- if (reg / 2 > ARRAY_SIZE(stac9766_reg))
+ if (reg / 2 >= ARRAY_SIZE(stac9766_reg))
return -EIO;
if (reg == AC97_RESET || reg == AC97_GPIO_STATUS ||
/* codec private data */
struct aic3x_priv {
+ struct snd_soc_codec codec;
unsigned int sysclk;
int master;
};
u8 *value)
{
*value = reg & 0xff;
- if (codec->hw_read(codec->control_data, value, 1) != 1)
- return -EIO;
+
+ value[0] = i2c_smbus_read_byte_data(codec->control_data, value[0]);
aic3x_write_reg_cache(codec, reg, *value);
return 0;
int codec_clk = 0, bypass_pll = 0, fsref, last_clk = 0;
u8 data, r, p, pll_q, pll_p = 1, pll_r = 1, pll_j = 1;
u16 pll_d = 1;
+ u8 reg;
/* select data word length */
data =
pll_q &= 0xf;
aic3x_write(codec, AIC3X_PLL_PROGA_REG, pll_q << PLLQ_SHIFT);
aic3x_write(codec, AIC3X_GPIOB_REG, CODEC_CLKIN_CLKDIV);
- } else
+ /* disable PLL if it is bypassed */
+ reg = aic3x_read_reg_cache(codec, AIC3X_PLL_PROGA_REG);
+ aic3x_write(codec, AIC3X_PLL_PROGA_REG, reg & ~PLL_ENABLE);
+
+ } else {
aic3x_write(codec, AIC3X_GPIOB_REG, CODEC_CLKIN_PLLDIV);
+ /* enable PLL when it is used */
+ reg = aic3x_read_reg_cache(codec, AIC3X_PLL_PROGA_REG);
+ aic3x_write(codec, AIC3X_PLL_PROGA_REG, reg | PLL_ENABLE);
+ }
/* Route Left DAC to left channel input and
* right DAC to right channel input */
* initialise the AIC3X driver
* register the mixer and dsp interfaces with the kernel
*/
-static int aic3x_init(struct snd_soc_device *socdev)
+static int aic3x_init(struct snd_soc_codec *codec)
{
- struct snd_soc_codec *codec = socdev->card->codec;
- struct aic3x_setup_data *setup = socdev->codec_data;
- int reg, ret = 0;
+ int reg;
+
+ mutex_init(&codec->mutex);
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
codec->name = "tlv320aic3x";
codec->owner = THIS_MODULE;
aic3x_write(codec, AIC3X_PAGE_SELECT, PAGE0_SELECT);
aic3x_write(codec, AIC3X_RESET, SOFT_RESET);
- /* register pcms */
- ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
- if (ret < 0) {
- printk(KERN_ERR "aic3x: failed to create pcms\n");
- goto pcm_err;
- }
-
/* DAC default volume and mute */
aic3x_write(codec, LDAC_VOL, DEFAULT_VOL | MUTE_ON);
aic3x_write(codec, RDAC_VOL, DEFAULT_VOL | MUTE_ON);
/* off, with power on */
aic3x_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
- /* setup GPIO functions */
- aic3x_write(codec, AIC3X_GPIO1_REG, (setup->gpio_func[0] & 0xf) << 4);
- aic3x_write(codec, AIC3X_GPIO2_REG, (setup->gpio_func[1] & 0xf) << 4);
+ return 0;
+}
+
+static struct snd_soc_codec *aic3x_codec;
- snd_soc_add_controls(codec, aic3x_snd_controls,
- ARRAY_SIZE(aic3x_snd_controls));
- aic3x_add_widgets(codec);
- ret = snd_soc_init_card(socdev);
+static int aic3x_register(struct snd_soc_codec *codec)
+{
+ int ret;
+
+ ret = aic3x_init(codec);
if (ret < 0) {
- printk(KERN_ERR "aic3x: failed to register card\n");
- goto card_err;
+ dev_err(codec->dev, "Failed to initialise device\n");
+ return ret;
}
- return ret;
+ aic3x_codec = codec;
-card_err:
- snd_soc_free_pcms(socdev);
- snd_soc_dapm_free(socdev);
-pcm_err:
- kfree(codec->reg_cache);
- return ret;
+ ret = snd_soc_register_codec(codec);
+ if (ret) {
+ dev_err(codec->dev, "Failed to register codec\n");
+ return ret;
+ }
+
+ ret = snd_soc_register_dai(&aic3x_dai);
+ if (ret) {
+ dev_err(codec->dev, "Failed to register dai\n");
+ snd_soc_unregister_codec(codec);
+ return ret;
+ }
+
+ return 0;
}
-static struct snd_soc_device *aic3x_socdev;
+static int aic3x_unregister(struct aic3x_priv *aic3x)
+{
+ aic3x_set_bias_level(&aic3x->codec, SND_SOC_BIAS_OFF);
+
+ snd_soc_unregister_dai(&aic3x_dai);
+ snd_soc_unregister_codec(&aic3x->codec);
+
+ kfree(aic3x);
+ aic3x_codec = NULL;
+
+ return 0;
+}
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
/*
static int aic3x_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
- struct snd_soc_device *socdev = aic3x_socdev;
- struct snd_soc_codec *codec = socdev->card->codec;
- int ret;
+ struct snd_soc_codec *codec;
+ struct aic3x_priv *aic3x;
+
+ aic3x = kzalloc(sizeof(struct aic3x_priv), GFP_KERNEL);
+ if (aic3x == NULL) {
+ dev_err(&i2c->dev, "failed to create private data\n");
+ return -ENOMEM;
+ }
- i2c_set_clientdata(i2c, codec);
+ codec = &aic3x->codec;
+ codec->dev = &i2c->dev;
+ codec->private_data = aic3x;
codec->control_data = i2c;
+ codec->hw_write = (hw_write_t) i2c_master_send;
- ret = aic3x_init(socdev);
- if (ret < 0)
- printk(KERN_ERR "aic3x: failed to initialise AIC3X\n");
- return ret;
+ i2c_set_clientdata(i2c, aic3x);
+
+ return aic3x_register(codec);
}
static int aic3x_i2c_remove(struct i2c_client *client)
{
- struct snd_soc_codec *codec = i2c_get_clientdata(client);
- kfree(codec->reg_cache);
- return 0;
+ struct aic3x_priv *aic3x = i2c_get_clientdata(client);
+
+ return aic3x_unregister(aic3x);
}
static const struct i2c_device_id aic3x_i2c_id[] = {
{ "tlv320aic3x", 0 },
+ { "tlv320aic33", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, aic3x_i2c_id);
.name = "aic3x I2C Codec",
.owner = THIS_MODULE,
},
- .probe = aic3x_i2c_probe,
+ .probe = aic3x_i2c_probe,
.remove = aic3x_i2c_remove,
.id_table = aic3x_i2c_id,
};
-static int aic3x_i2c_read(struct i2c_client *client, u8 *value, int len)
-{
- value[0] = i2c_smbus_read_byte_data(client, value[0]);
- return (len == 1);
-}
-
-static int aic3x_add_i2c_device(struct platform_device *pdev,
- const struct aic3x_setup_data *setup)
+static inline void aic3x_i2c_init(void)
{
- struct i2c_board_info info;
- struct i2c_adapter *adapter;
- struct i2c_client *client;
int ret;
ret = i2c_add_driver(&aic3x_i2c_driver);
- if (ret != 0) {
- dev_err(&pdev->dev, "can't add i2c driver\n");
- return ret;
- }
-
- memset(&info, 0, sizeof(struct i2c_board_info));
- info.addr = setup->i2c_address;
- strlcpy(info.type, "tlv320aic3x", I2C_NAME_SIZE);
-
- adapter = i2c_get_adapter(setup->i2c_bus);
- if (!adapter) {
- dev_err(&pdev->dev, "can't get i2c adapter %d\n",
- setup->i2c_bus);
- goto err_driver;
- }
-
- client = i2c_new_device(adapter, &info);
- i2c_put_adapter(adapter);
- if (!client) {
- dev_err(&pdev->dev, "can't add i2c device at 0x%x\n",
- (unsigned int)info.addr);
- goto err_driver;
- }
-
- return 0;
+ if (ret)
+ printk(KERN_ERR "%s: error regsitering i2c driver, %d\n",
+ __func__, ret);
+}
-err_driver:
+static inline void aic3x_i2c_exit(void)
+{
i2c_del_driver(&aic3x_i2c_driver);
- return -ENODEV;
}
+#else
+static inline void aic3x_i2c_init(void) { }
+static inline void aic3x_i2c_exit(void) { }
#endif
static int aic3x_probe(struct platform_device *pdev)
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct aic3x_setup_data *setup;
struct snd_soc_codec *codec;
- struct aic3x_priv *aic3x;
int ret = 0;
- printk(KERN_INFO "AIC3X Audio Codec %s\n", AIC3X_VERSION);
+ codec = aic3x_codec;
+ if (!codec) {
+ dev_err(&pdev->dev, "Codec not registered\n");
+ return -ENODEV;
+ }
+ socdev->card->codec = codec;
setup = socdev->codec_data;
- codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
- if (codec == NULL)
- return -ENOMEM;
- aic3x = kzalloc(sizeof(struct aic3x_priv), GFP_KERNEL);
- if (aic3x == NULL) {
- kfree(codec);
- return -ENOMEM;
+ if (setup) {
+ /* setup GPIO functions */
+ aic3x_write(codec, AIC3X_GPIO1_REG,
+ (setup->gpio_func[0] & 0xf) << 4);
+ aic3x_write(codec, AIC3X_GPIO2_REG,
+ (setup->gpio_func[1] & 0xf) << 4);
}
- codec->private_data = aic3x;
- socdev->card->codec = codec;
- mutex_init(&codec->mutex);
- INIT_LIST_HEAD(&codec->dapm_widgets);
- INIT_LIST_HEAD(&codec->dapm_paths);
-
- aic3x_socdev = socdev;
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
- if (setup->i2c_address) {
- codec->hw_write = (hw_write_t) i2c_master_send;
- codec->hw_read = (hw_read_t) aic3x_i2c_read;
- ret = aic3x_add_i2c_device(pdev, setup);
+ /* register pcms */
+ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+ if (ret < 0) {
+ printk(KERN_ERR "aic3x: failed to create pcms\n");
+ goto pcm_err;
}
-#else
- /* Add other interfaces here */
-#endif
- if (ret != 0) {
- kfree(codec->private_data);
- kfree(codec);
+ snd_soc_add_controls(codec, aic3x_snd_controls,
+ ARRAY_SIZE(aic3x_snd_controls));
+
+ aic3x_add_widgets(codec);
+
+ ret = snd_soc_init_card(socdev);
+ if (ret < 0) {
+ printk(KERN_ERR "aic3x: failed to register card\n");
+ goto card_err;
}
+
+ return ret;
+
+card_err:
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+
+pcm_err:
+ kfree(codec->reg_cache);
return ret;
}
snd_soc_free_pcms(socdev);
snd_soc_dapm_free(socdev);
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
- i2c_unregister_device(codec->control_data);
- i2c_del_driver(&aic3x_i2c_driver);
-#endif
- kfree(codec->private_data);
- kfree(codec);
+
+ kfree(codec->reg_cache);
return 0;
}
static int __init aic3x_modinit(void)
{
- return snd_soc_register_dai(&aic3x_dai);
+ aic3x_i2c_init();
+
+ return 0;
}
module_init(aic3x_modinit);
static void __exit aic3x_exit(void)
{
- snd_soc_unregister_dai(&aic3x_dai);
+ aic3x_i2c_exit();
}
module_exit(aic3x_exit);
int aic3x_button_pressed(struct snd_soc_codec *codec);
struct aic3x_setup_data {
- int i2c_bus;
- unsigned short i2c_address;
unsigned int gpio_func[2];
};
return;
if (mute) {
- /* Bypass the reg_cache and mute the volumes
- * Headset mute is done in it's own event handler
- * Things to mute: Earpiece, PreDrivL/R, CarkitL/R
- */
- reg_val = twl4030_read_reg_cache(codec, TWL4030_REG_EAR_CTL);
- twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE,
- reg_val & (~TWL4030_EAR_GAIN),
- TWL4030_REG_EAR_CTL);
-
- reg_val = twl4030_read_reg_cache(codec, TWL4030_REG_PREDL_CTL);
- twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE,
- reg_val & (~TWL4030_PREDL_GAIN),
- TWL4030_REG_PREDL_CTL);
- reg_val = twl4030_read_reg_cache(codec, TWL4030_REG_PREDR_CTL);
- twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE,
- reg_val & (~TWL4030_PREDR_GAIN),
- TWL4030_REG_PREDL_CTL);
-
- reg_val = twl4030_read_reg_cache(codec, TWL4030_REG_PRECKL_CTL);
- twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE,
- reg_val & (~TWL4030_PRECKL_GAIN),
- TWL4030_REG_PRECKL_CTL);
- reg_val = twl4030_read_reg_cache(codec, TWL4030_REG_PRECKR_CTL);
- twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE,
- reg_val & (~TWL4030_PRECKR_GAIN),
- TWL4030_REG_PRECKR_CTL);
-
/* Disable PLL */
reg_val = twl4030_read_reg_cache(codec, TWL4030_REG_APLL_CTL);
reg_val &= ~TWL4030_APLL_EN;
twl4030_write(codec, TWL4030_REG_APLL_CTL, reg_val);
} else {
- /* Restore the volumes
- * Headset mute is done in it's own event handler
- * Things to restore: Earpiece, PreDrivL/R, CarkitL/R
- */
- twl4030_write(codec, TWL4030_REG_EAR_CTL,
- twl4030_read_reg_cache(codec, TWL4030_REG_EAR_CTL));
-
- twl4030_write(codec, TWL4030_REG_PREDL_CTL,
- twl4030_read_reg_cache(codec, TWL4030_REG_PREDL_CTL));
- twl4030_write(codec, TWL4030_REG_PREDR_CTL,
- twl4030_read_reg_cache(codec, TWL4030_REG_PREDR_CTL));
-
- twl4030_write(codec, TWL4030_REG_PRECKL_CTL,
- twl4030_read_reg_cache(codec, TWL4030_REG_PRECKL_CTL));
- twl4030_write(codec, TWL4030_REG_PRECKR_CTL,
- twl4030_read_reg_cache(codec, TWL4030_REG_PRECKR_CTL));
-
/* Enable PLL */
reg_val = twl4030_read_reg_cache(codec, TWL4030_REG_APLL_CTL);
reg_val |= TWL4030_APLL_EN;
/* Left analog microphone selection */
static const struct snd_kcontrol_new twl4030_dapm_analoglmic_controls[] = {
- SOC_DAPM_SINGLE("Main mic", TWL4030_REG_ANAMICL, 0, 1, 0),
- SOC_DAPM_SINGLE("Headset mic", TWL4030_REG_ANAMICL, 1, 1, 0),
- SOC_DAPM_SINGLE("AUXL", TWL4030_REG_ANAMICL, 2, 1, 0),
- SOC_DAPM_SINGLE("Carkit mic", TWL4030_REG_ANAMICL, 3, 1, 0),
+ SOC_DAPM_SINGLE("Main Mic Capture Switch",
+ TWL4030_REG_ANAMICL, 0, 1, 0),
+ SOC_DAPM_SINGLE("Headset Mic Capture Switch",
+ TWL4030_REG_ANAMICL, 1, 1, 0),
+ SOC_DAPM_SINGLE("AUXL Capture Switch",
+ TWL4030_REG_ANAMICL, 2, 1, 0),
+ SOC_DAPM_SINGLE("Carkit Mic Capture Switch",
+ TWL4030_REG_ANAMICL, 3, 1, 0),
};
/* Right analog microphone selection */
static const struct snd_kcontrol_new twl4030_dapm_analogrmic_controls[] = {
- SOC_DAPM_SINGLE("Sub mic", TWL4030_REG_ANAMICR, 0, 1, 0),
- SOC_DAPM_SINGLE("AUXR", TWL4030_REG_ANAMICR, 2, 1, 0),
+ SOC_DAPM_SINGLE("Sub Mic Capture Switch", TWL4030_REG_ANAMICR, 0, 1, 0),
+ SOC_DAPM_SINGLE("AUXR Capture Switch", TWL4030_REG_ANAMICR, 2, 1, 0),
};
/* TX1 L/R Analog/Digital microphone selection */
return 0;
}
+/*
+ * Output PGA builder:
+ * Handle the muting and unmuting of the given output (turning off the
+ * amplifier associated with the output pin)
+ * On mute bypass the reg_cache and mute the volume
+ * On unmute: restore the register content
+ * Outputs handled in this way: Earpiece, PreDrivL/R, CarkitL/R
+ */
+#define TWL4030_OUTPUT_PGA(pin_name, reg, mask) \
+static int pin_name##pga_event(struct snd_soc_dapm_widget *w, \
+ struct snd_kcontrol *kcontrol, int event) \
+{ \
+ u8 reg_val; \
+ \
+ switch (event) { \
+ case SND_SOC_DAPM_POST_PMU: \
+ twl4030_write(w->codec, reg, \
+ twl4030_read_reg_cache(w->codec, reg)); \
+ break; \
+ case SND_SOC_DAPM_POST_PMD: \
+ reg_val = twl4030_read_reg_cache(w->codec, reg); \
+ twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, \
+ reg_val & (~mask), \
+ reg); \
+ break; \
+ } \
+ return 0; \
+}
+
+TWL4030_OUTPUT_PGA(earpiece, TWL4030_REG_EAR_CTL, TWL4030_EAR_GAIN);
+TWL4030_OUTPUT_PGA(predrivel, TWL4030_REG_PREDL_CTL, TWL4030_PREDL_GAIN);
+TWL4030_OUTPUT_PGA(predriver, TWL4030_REG_PREDR_CTL, TWL4030_PREDR_GAIN);
+TWL4030_OUTPUT_PGA(carkitl, TWL4030_REG_PRECKL_CTL, TWL4030_PRECKL_GAIN);
+TWL4030_OUTPUT_PGA(carkitr, TWL4030_REG_PRECKR_CTL, TWL4030_PRECKR_GAIN);
+
static void handsfree_ramp(struct snd_soc_codec *codec, int reg, int ramp)
{
unsigned char hs_ctl;
static void headset_ramp(struct snd_soc_codec *codec, int ramp)
{
+ struct snd_soc_device *socdev = codec->socdev;
+ struct twl4030_setup_data *setup = socdev->codec_data;
+
unsigned char hs_gain, hs_pop;
struct twl4030_priv *twl4030 = codec->private_data;
/* Base values for ramp delay calculation: 2^19 - 2^26 */
hs_gain = twl4030_read_reg_cache(codec, TWL4030_REG_HS_GAIN_SET);
hs_pop = twl4030_read_reg_cache(codec, TWL4030_REG_HS_POPN_SET);
+ /* Enable external mute control, this dramatically reduces
+ * the pop-noise */
+ if (setup && setup->hs_extmute) {
+ if (setup->set_hs_extmute) {
+ setup->set_hs_extmute(1);
+ } else {
+ hs_pop |= TWL4030_EXTMUTE;
+ twl4030_write(codec, TWL4030_REG_HS_POPN_SET, hs_pop);
+ }
+ }
+
if (ramp) {
/* Headset ramp-up according to the TRM */
hs_pop |= TWL4030_VMID_EN;
twl4030_write(codec, TWL4030_REG_HS_GAIN_SET, hs_gain);
hs_pop |= TWL4030_RAMP_EN;
twl4030_write(codec, TWL4030_REG_HS_POPN_SET, hs_pop);
+ /* Wait ramp delay time + 1, so the VMID can settle */
+ mdelay((ramp_base[(hs_pop & TWL4030_RAMP_DELAY) >> 2] /
+ twl4030->sysclk) + 1);
} else {
/* Headset ramp-down _not_ according to
* the TRM, but in a way that it is working */
hs_pop &= ~TWL4030_VMID_EN;
twl4030_write(codec, TWL4030_REG_HS_POPN_SET, hs_pop);
}
+
+ /* Disable external mute */
+ if (setup && setup->hs_extmute) {
+ if (setup->set_hs_extmute) {
+ setup->set_hs_extmute(0);
+ } else {
+ hs_pop &= ~TWL4030_EXTMUTE;
+ twl4030_write(codec, TWL4030_REG_HS_POPN_SET, hs_pop);
+ }
+ }
}
static int headsetlpga_event(struct snd_soc_dapm_widget *w,
reg = twl4030_read_reg_cache(w->codec, m->reg);
- if (m->reg <= TWL4030_REG_ARXR2_APGA_CTL) {
+ /*
+ * bypass_state[0:3] - analog HiFi bypass
+ * bypass_state[4] - analog voice bypass
+ * bypass_state[5] - digital voice bypass
+ * bypass_state[6:7] - digital HiFi bypass
+ */
+ if (m->reg == TWL4030_REG_VSTPGA) {
+ /* Voice digital bypass */
+ if (reg)
+ twl4030->bypass_state |= (1 << 5);
+ else
+ twl4030->bypass_state &= ~(1 << 5);
+ } else if (m->reg <= TWL4030_REG_ARXR2_APGA_CTL) {
/* Analog bypass */
if (reg & (1 << m->shift))
twl4030->bypass_state |=
twl4030->bypass_state |= (1 << 4);
else
twl4030->bypass_state &= ~(1 << 4);
- } else if (m->reg == TWL4030_REG_VSTPGA) {
- /* Voice digital bypass */
- if (reg)
- twl4030->bypass_state |= (1 << 5);
- else
- twl4030->bypass_state &= ~(1 << 5);
} else {
/* Digital bypass */
if (reg & (0x7 << m->shift))
ARRAY_SIZE(twl4030_op_modes_texts),
twl4030_op_modes_texts);
-int snd_soc_put_twl4030_opmode_enum_double(struct snd_kcontrol *kcontrol,
+static int snd_soc_put_twl4030_opmode_enum_double(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
*/
static DECLARE_TLV_DB_SCALE(input_gain_tlv, 0, 600, 0);
+/* AVADC clock priority */
+static const char *twl4030_avadc_clk_priority_texts[] = {
+ "Voice high priority", "HiFi high priority"
+};
+
+static const struct soc_enum twl4030_avadc_clk_priority_enum =
+ SOC_ENUM_SINGLE(TWL4030_REG_AVADC_CTL, 2,
+ ARRAY_SIZE(twl4030_avadc_clk_priority_texts),
+ twl4030_avadc_clk_priority_texts);
+
static const char *twl4030_rampdelay_texts[] = {
"27/20/14 ms", "55/40/27 ms", "109/81/55 ms", "218/161/109 ms",
"437/323/218 ms", "874/645/437 ms", "1748/1291/874 ms",
SOC_DOUBLE_TLV("Analog Capture Volume", TWL4030_REG_ANAMIC_GAIN,
0, 3, 5, 0, input_gain_tlv),
+ SOC_ENUM("AVADC Clock Priority", twl4030_avadc_clk_priority_enum),
+
SOC_ENUM("HS ramp delay", twl4030_rampdelay_enum),
SOC_ENUM("Vibra H-bridge mode", twl4030_vibradirmode_enum),
SND_SOC_DAPM_MIXER("Earpiece Mixer", SND_SOC_NOPM, 0, 0,
&twl4030_dapm_earpiece_controls[0],
ARRAY_SIZE(twl4030_dapm_earpiece_controls)),
+ SND_SOC_DAPM_PGA_E("Earpiece PGA", SND_SOC_NOPM,
+ 0, 0, NULL, 0, earpiecepga_event,
+ SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
/* PreDrivL/R */
SND_SOC_DAPM_MIXER("PredriveL Mixer", SND_SOC_NOPM, 0, 0,
&twl4030_dapm_predrivel_controls[0],
ARRAY_SIZE(twl4030_dapm_predrivel_controls)),
+ SND_SOC_DAPM_PGA_E("PredriveL PGA", SND_SOC_NOPM,
+ 0, 0, NULL, 0, predrivelpga_event,
+ SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
SND_SOC_DAPM_MIXER("PredriveR Mixer", SND_SOC_NOPM, 0, 0,
&twl4030_dapm_predriver_controls[0],
ARRAY_SIZE(twl4030_dapm_predriver_controls)),
+ SND_SOC_DAPM_PGA_E("PredriveR PGA", SND_SOC_NOPM,
+ 0, 0, NULL, 0, predriverpga_event,
+ SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
/* HeadsetL/R */
SND_SOC_DAPM_MIXER("HeadsetL Mixer", SND_SOC_NOPM, 0, 0,
&twl4030_dapm_hsol_controls[0],
SND_SOC_DAPM_MIXER("CarkitL Mixer", SND_SOC_NOPM, 0, 0,
&twl4030_dapm_carkitl_controls[0],
ARRAY_SIZE(twl4030_dapm_carkitl_controls)),
+ SND_SOC_DAPM_PGA_E("CarkitL PGA", SND_SOC_NOPM,
+ 0, 0, NULL, 0, carkitlpga_event,
+ SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
SND_SOC_DAPM_MIXER("CarkitR Mixer", SND_SOC_NOPM, 0, 0,
&twl4030_dapm_carkitr_controls[0],
ARRAY_SIZE(twl4030_dapm_carkitr_controls)),
+ SND_SOC_DAPM_PGA_E("CarkitR PGA", SND_SOC_NOPM,
+ 0, 0, NULL, 0, carkitrpga_event,
+ SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
/* Output MUX controls */
/* HandsfreeL/R */
SND_SOC_DAPM_MUX("HandsfreeL Mux", SND_SOC_NOPM, 0, 0,
&twl4030_dapm_handsfreel_control),
- SND_SOC_DAPM_SWITCH("HandsfreeL Switch", SND_SOC_NOPM, 0, 0,
+ SND_SOC_DAPM_SWITCH("HandsfreeL", SND_SOC_NOPM, 0, 0,
&twl4030_dapm_handsfreelmute_control),
SND_SOC_DAPM_PGA_E("HandsfreeL PGA", SND_SOC_NOPM,
0, 0, NULL, 0, handsfreelpga_event,
SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
SND_SOC_DAPM_MUX("HandsfreeR Mux", SND_SOC_NOPM, 5, 0,
&twl4030_dapm_handsfreer_control),
- SND_SOC_DAPM_SWITCH("HandsfreeR Switch", SND_SOC_NOPM, 0, 0,
+ SND_SOC_DAPM_SWITCH("HandsfreeR", SND_SOC_NOPM, 0, 0,
&twl4030_dapm_handsfreermute_control),
SND_SOC_DAPM_PGA_E("HandsfreeR PGA", SND_SOC_NOPM,
0, 0, NULL, 0, handsfreerpga_event,
SND_SOC_DAPM_POST_REG),
/* Analog input mixers for the capture amplifiers */
- SND_SOC_DAPM_MIXER("Analog Left Capture Route",
+ SND_SOC_DAPM_MIXER("Analog Left",
TWL4030_REG_ANAMICL, 4, 0,
&twl4030_dapm_analoglmic_controls[0],
ARRAY_SIZE(twl4030_dapm_analoglmic_controls)),
- SND_SOC_DAPM_MIXER("Analog Right Capture Route",
+ SND_SOC_DAPM_MIXER("Analog Right",
TWL4030_REG_ANAMICR, 4, 0,
&twl4030_dapm_analogrmic_controls[0],
ARRAY_SIZE(twl4030_dapm_analogrmic_controls)),
{"Earpiece Mixer", "AudioL1", "Analog L1 Playback Mixer"},
{"Earpiece Mixer", "AudioL2", "Analog L2 Playback Mixer"},
{"Earpiece Mixer", "AudioR1", "Analog R1 Playback Mixer"},
+ {"Earpiece PGA", NULL, "Earpiece Mixer"},
/* PreDrivL */
{"PredriveL Mixer", "Voice", "Analog Voice Playback Mixer"},
{"PredriveL Mixer", "AudioL1", "Analog L1 Playback Mixer"},
{"PredriveL Mixer", "AudioL2", "Analog L2 Playback Mixer"},
{"PredriveL Mixer", "AudioR2", "Analog R2 Playback Mixer"},
+ {"PredriveL PGA", NULL, "PredriveL Mixer"},
/* PreDrivR */
{"PredriveR Mixer", "Voice", "Analog Voice Playback Mixer"},
{"PredriveR Mixer", "AudioR1", "Analog R1 Playback Mixer"},
{"PredriveR Mixer", "AudioR2", "Analog R2 Playback Mixer"},
{"PredriveR Mixer", "AudioL2", "Analog L2 Playback Mixer"},
+ {"PredriveR PGA", NULL, "PredriveR Mixer"},
/* HeadsetL */
{"HeadsetL Mixer", "Voice", "Analog Voice Playback Mixer"},
{"HeadsetL Mixer", "AudioL1", "Analog L1 Playback Mixer"},
{"CarkitL Mixer", "Voice", "Analog Voice Playback Mixer"},
{"CarkitL Mixer", "AudioL1", "Analog L1 Playback Mixer"},
{"CarkitL Mixer", "AudioL2", "Analog L2 Playback Mixer"},
+ {"CarkitL PGA", NULL, "CarkitL Mixer"},
/* CarkitR */
{"CarkitR Mixer", "Voice", "Analog Voice Playback Mixer"},
{"CarkitR Mixer", "AudioR1", "Analog R1 Playback Mixer"},
{"CarkitR Mixer", "AudioR2", "Analog R2 Playback Mixer"},
+ {"CarkitR PGA", NULL, "CarkitR Mixer"},
/* HandsfreeL */
{"HandsfreeL Mux", "Voice", "Analog Voice Playback Mixer"},
{"HandsfreeL Mux", "AudioL1", "Analog L1 Playback Mixer"},
{"HandsfreeL Mux", "AudioL2", "Analog L2 Playback Mixer"},
{"HandsfreeL Mux", "AudioR2", "Analog R2 Playback Mixer"},
- {"HandsfreeL Switch", "Switch", "HandsfreeL Mux"},
- {"HandsfreeL PGA", NULL, "HandsfreeL Switch"},
+ {"HandsfreeL", "Switch", "HandsfreeL Mux"},
+ {"HandsfreeL PGA", NULL, "HandsfreeL"},
/* HandsfreeR */
{"HandsfreeR Mux", "Voice", "Analog Voice Playback Mixer"},
{"HandsfreeR Mux", "AudioR1", "Analog R1 Playback Mixer"},
{"HandsfreeR Mux", "AudioR2", "Analog R2 Playback Mixer"},
{"HandsfreeR Mux", "AudioL2", "Analog L2 Playback Mixer"},
- {"HandsfreeR Switch", "Switch", "HandsfreeR Mux"},
- {"HandsfreeR PGA", NULL, "HandsfreeR Switch"},
+ {"HandsfreeR", "Switch", "HandsfreeR Mux"},
+ {"HandsfreeR PGA", NULL, "HandsfreeR"},
/* Vibra */
{"Vibra Mux", "AudioL1", "DAC Left1"},
{"Vibra Mux", "AudioR1", "DAC Right1"},
/* outputs */
{"OUTL", NULL, "Analog L2 Playback Mixer"},
{"OUTR", NULL, "Analog R2 Playback Mixer"},
- {"EARPIECE", NULL, "Earpiece Mixer"},
- {"PREDRIVEL", NULL, "PredriveL Mixer"},
- {"PREDRIVER", NULL, "PredriveR Mixer"},
+ {"EARPIECE", NULL, "Earpiece PGA"},
+ {"PREDRIVEL", NULL, "PredriveL PGA"},
+ {"PREDRIVER", NULL, "PredriveR PGA"},
{"HSOL", NULL, "HeadsetL PGA"},
{"HSOR", NULL, "HeadsetR PGA"},
- {"CARKITL", NULL, "CarkitL Mixer"},
- {"CARKITR", NULL, "CarkitR Mixer"},
+ {"CARKITL", NULL, "CarkitL PGA"},
+ {"CARKITR", NULL, "CarkitR PGA"},
{"HFL", NULL, "HandsfreeL PGA"},
{"HFR", NULL, "HandsfreeR PGA"},
{"Vibra Route", "Audio", "Vibra Mux"},
{"VIBRA", NULL, "Vibra Route"},
/* Capture path */
- {"Analog Left Capture Route", "Main mic", "MAINMIC"},
- {"Analog Left Capture Route", "Headset mic", "HSMIC"},
- {"Analog Left Capture Route", "AUXL", "AUXL"},
- {"Analog Left Capture Route", "Carkit mic", "CARKITMIC"},
+ {"Analog Left", "Main Mic Capture Switch", "MAINMIC"},
+ {"Analog Left", "Headset Mic Capture Switch", "HSMIC"},
+ {"Analog Left", "AUXL Capture Switch", "AUXL"},
+ {"Analog Left", "Carkit Mic Capture Switch", "CARKITMIC"},
- {"Analog Right Capture Route", "Sub mic", "SUBMIC"},
- {"Analog Right Capture Route", "AUXR", "AUXR"},
+ {"Analog Right", "Sub Mic Capture Switch", "SUBMIC"},
+ {"Analog Right", "AUXR Capture Switch", "AUXR"},
- {"ADC Physical Left", NULL, "Analog Left Capture Route"},
- {"ADC Physical Right", NULL, "Analog Right Capture Route"},
+ {"ADC Physical Left", NULL, "Analog Left"},
+ {"ADC Physical Right", NULL, "Analog Right"},
{"Digimic0 Enable", NULL, "DIGIMIC0"},
{"Digimic1 Enable", NULL, "DIGIMIC1"},
{"ADC Virtual Right2", NULL, "TX2 Capture Route"},
/* Analog bypass routes */
- {"Right1 Analog Loopback", "Switch", "Analog Right Capture Route"},
- {"Left1 Analog Loopback", "Switch", "Analog Left Capture Route"},
- {"Right2 Analog Loopback", "Switch", "Analog Right Capture Route"},
- {"Left2 Analog Loopback", "Switch", "Analog Left Capture Route"},
- {"Voice Analog Loopback", "Switch", "Analog Left Capture Route"},
+ {"Right1 Analog Loopback", "Switch", "Analog Right"},
+ {"Left1 Analog Loopback", "Switch", "Analog Left"},
+ {"Right2 Analog Loopback", "Switch", "Analog Right"},
+ {"Left2 Analog Loopback", "Switch", "Analog Left"},
+ {"Voice Analog Loopback", "Switch", "Analog Left"},
{"Analog R1 Playback Mixer", NULL, "Right1 Analog Loopback"},
{"Analog L1 Playback Mixer", NULL, "Left1 Analog Loopback"},
/* If the substream has 4 channel, do the necessary setup */
if (params_channels(params) == 4) {
- u8 format, mode;
-
format = twl4030_read_reg_cache(codec, TWL4030_REG_AUDIO_IF);
mode = twl4030_read_reg_cache(codec, TWL4030_REG_CODEC_MODE);
return 0;
}
+static int twl4030_set_tristate(struct snd_soc_dai *dai, int tristate)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ u8 reg = twl4030_read_reg_cache(codec, TWL4030_REG_AUDIO_IF);
+
+ if (tristate)
+ reg |= TWL4030_AIF_TRI_EN;
+ else
+ reg &= ~TWL4030_AIF_TRI_EN;
+
+ return twl4030_write(codec, TWL4030_REG_AUDIO_IF, reg);
+}
+
/* In case of voice mode, the RX1 L(VRX) for downlink and the TX2 L/R
* (VTXL, VTXR) for uplink has to be enabled/disabled. */
static void twl4030_voice_enable(struct snd_soc_codec *codec, int direction,
/* set master/slave audio interface */
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
- case SND_SOC_DAIFMT_CBS_CFM:
+ case SND_SOC_DAIFMT_CBM_CFM:
format &= ~(TWL4030_VIF_SLAVE_EN);
break;
case SND_SOC_DAIFMT_CBS_CFS:
return 0;
}
+static int twl4030_voice_set_tristate(struct snd_soc_dai *dai, int tristate)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ u8 reg = twl4030_read_reg_cache(codec, TWL4030_REG_VOICE_IF);
+
+ if (tristate)
+ reg |= TWL4030_VIF_TRI_EN;
+ else
+ reg &= ~TWL4030_VIF_TRI_EN;
+
+ return twl4030_write(codec, TWL4030_REG_VOICE_IF, reg);
+}
+
#define TWL4030_RATES (SNDRV_PCM_RATE_8000_48000)
#define TWL4030_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FORMAT_S24_LE)
.hw_params = twl4030_hw_params,
.set_sysclk = twl4030_set_dai_sysclk,
.set_fmt = twl4030_set_dai_fmt,
+ .set_tristate = twl4030_set_tristate,
};
static struct snd_soc_dai_ops twl4030_dai_voice_ops = {
.hw_params = twl4030_voice_hw_params,
.set_sysclk = twl4030_voice_set_dai_sysclk,
.set_fmt = twl4030_voice_set_dai_fmt,
+ .set_tristate = twl4030_voice_set_tristate,
};
struct snd_soc_dai twl4030_dai[] = {
struct twl4030_setup_data {
unsigned int ramp_delay_value;
unsigned int sysclk;
+ unsigned int hs_extmute:1;
+ void (*set_hs_extmute)(int mute);
};
#endif /* End of __TWL4030_AUDIO_H__ */
else
mute_reg &= ~(1<<2);
- uda134x_write(codec, UDA134X_DATA010, mute_reg & ~(1<<2));
+ uda134x_write(codec, UDA134X_DATA010, mute_reg);
return 0;
}
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
- * Copyright (c) 2007 Philipp Zabel <philipp.zabel@gmail.com>
- * Improved support for DAPM and audio routing/mixing capabilities,
- * added TLV support.
+ * Copyright (c) 2007-2009 Philipp Zabel <philipp.zabel@gmail.com>
*
* Modified by Richard Purdie <richard@openedhand.com> to fit into SoC
* codec model.
#include <linux/module.h>
#include <linux/init.h>
#include <linux/types.h>
-#include <linux/string.h>
#include <linux/slab.h>
#include <linux/errno.h>
-#include <linux/ioctl.h>
+#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/workqueue.h>
#include <sound/core.h>
#include <sound/control.h>
#include <sound/initval.h>
-#include <sound/info.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#include <sound/tlv.h>
+#include <sound/uda1380.h>
#include "uda1380.h"
-static struct work_struct uda1380_work;
static struct snd_soc_codec *uda1380_codec;
+/* codec private data */
+struct uda1380_priv {
+ struct snd_soc_codec codec;
+ u16 reg_cache[UDA1380_CACHEREGNUM];
+ unsigned int dac_clk;
+ struct work_struct work;
+};
+
/*
* uda1380 register cache
*/
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = socdev->card->codec;
+ struct uda1380_priv *uda1380 = codec->private_data;
int mixer = uda1380_read_reg_cache(codec, UDA1380_MIXER);
switch (cmd) {
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
uda1380_write_reg_cache(codec, UDA1380_MIXER,
mixer & ~R14_SILENCE);
- schedule_work(&uda1380_work);
+ schedule_work(&uda1380->work);
break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
uda1380_write_reg_cache(codec, UDA1380_MIXER,
mixer | R14_SILENCE);
- schedule_work(&uda1380_work);
+ schedule_work(&uda1380->work);
break;
}
return 0;
return 0;
}
-/*
- * initialise the UDA1380 driver
- * register mixer and dsp interfaces with the kernel
- */
-static int uda1380_init(struct snd_soc_device *socdev, int dac_clk)
+static int uda1380_probe(struct platform_device *pdev)
{
- struct snd_soc_codec *codec = socdev->card->codec;
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec;
+ struct uda1380_platform_data *pdata;
int ret = 0;
- codec->name = "UDA1380";
- codec->owner = THIS_MODULE;
- codec->read = uda1380_read_reg_cache;
- codec->write = uda1380_write;
- codec->set_bias_level = uda1380_set_bias_level;
- codec->dai = uda1380_dai;
- codec->num_dai = ARRAY_SIZE(uda1380_dai);
- codec->reg_cache = kmemdup(uda1380_reg, sizeof(uda1380_reg),
- GFP_KERNEL);
- if (codec->reg_cache == NULL)
- return -ENOMEM;
- codec->reg_cache_size = ARRAY_SIZE(uda1380_reg);
- codec->reg_cache_step = 1;
- uda1380_reset(codec);
+ if (uda1380_codec == NULL) {
+ dev_err(&pdev->dev, "Codec device not registered\n");
+ return -ENODEV;
+ }
- uda1380_codec = codec;
- INIT_WORK(&uda1380_work, uda1380_flush_work);
+ socdev->card->codec = uda1380_codec;
+ codec = uda1380_codec;
+ pdata = codec->dev->platform_data;
/* register pcms */
ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
if (ret < 0) {
- pr_err("uda1380: failed to create pcms\n");
+ dev_err(codec->dev, "failed to create pcms: %d\n", ret);
goto pcm_err;
}
/* power on device */
uda1380_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
/* set clock input */
- switch (dac_clk) {
+ switch (pdata->dac_clk) {
case UDA1380_DAC_CLK_SYSCLK:
uda1380_write(codec, UDA1380_CLK, 0);
break;
break;
}
- /* uda1380 init */
snd_soc_add_controls(codec, uda1380_snd_controls,
ARRAY_SIZE(uda1380_snd_controls));
uda1380_add_widgets(codec);
ret = snd_soc_init_card(socdev);
if (ret < 0) {
- pr_err("uda1380: failed to register card\n");
+ dev_err(codec->dev, "failed to register card: %d\n", ret);
goto card_err;
}
snd_soc_free_pcms(socdev);
snd_soc_dapm_free(socdev);
pcm_err:
- kfree(codec->reg_cache);
return ret;
}
-static struct snd_soc_device *uda1380_socdev;
-
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
-
-static int uda1380_i2c_probe(struct i2c_client *i2c,
- const struct i2c_device_id *id)
+/* power down chip */
+static int uda1380_remove(struct platform_device *pdev)
{
- struct snd_soc_device *socdev = uda1380_socdev;
- struct uda1380_setup_data *setup = socdev->codec_data;
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct snd_soc_codec *codec = socdev->card->codec;
- int ret;
-
- i2c_set_clientdata(i2c, codec);
- codec->control_data = i2c;
- ret = uda1380_init(socdev, setup->dac_clk);
- if (ret < 0)
- pr_err("uda1380: failed to initialise UDA1380\n");
+ if (codec->control_data)
+ uda1380_set_bias_level(codec, SND_SOC_BIAS_OFF);
- return ret;
-}
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
-static int uda1380_i2c_remove(struct i2c_client *client)
-{
- struct snd_soc_codec *codec = i2c_get_clientdata(client);
- kfree(codec->reg_cache);
return 0;
}
-static const struct i2c_device_id uda1380_i2c_id[] = {
- { "uda1380", 0 },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, uda1380_i2c_id);
-
-static struct i2c_driver uda1380_i2c_driver = {
- .driver = {
- .name = "UDA1380 I2C Codec",
- .owner = THIS_MODULE,
- },
- .probe = uda1380_i2c_probe,
- .remove = uda1380_i2c_remove,
- .id_table = uda1380_i2c_id,
+struct snd_soc_codec_device soc_codec_dev_uda1380 = {
+ .probe = uda1380_probe,
+ .remove = uda1380_remove,
+ .suspend = uda1380_suspend,
+ .resume = uda1380_resume,
};
+EXPORT_SYMBOL_GPL(soc_codec_dev_uda1380);
-static int uda1380_add_i2c_device(struct platform_device *pdev,
- const struct uda1380_setup_data *setup)
+static int uda1380_register(struct uda1380_priv *uda1380)
{
- struct i2c_board_info info;
- struct i2c_adapter *adapter;
- struct i2c_client *client;
- int ret;
+ int ret, i;
+ struct snd_soc_codec *codec = &uda1380->codec;
+ struct uda1380_platform_data *pdata = codec->dev->platform_data;
- ret = i2c_add_driver(&uda1380_i2c_driver);
- if (ret != 0) {
- dev_err(&pdev->dev, "can't add i2c driver\n");
- return ret;
+ if (uda1380_codec) {
+ dev_err(codec->dev, "Another UDA1380 is registered\n");
+ return -EINVAL;
+ }
+
+ if (!pdata || !pdata->gpio_power || !pdata->gpio_reset)
+ return -EINVAL;
+
+ ret = gpio_request(pdata->gpio_power, "uda1380 power");
+ if (ret)
+ goto err_out;
+ ret = gpio_request(pdata->gpio_reset, "uda1380 reset");
+ if (ret)
+ goto err_gpio;
+
+ gpio_direction_output(pdata->gpio_power, 1);
+
+ /* we may need to have the clock running here - pH5 */
+ gpio_direction_output(pdata->gpio_reset, 1);
+ udelay(5);
+ gpio_set_value(pdata->gpio_reset, 0);
+
+ mutex_init(&codec->mutex);
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
+
+ codec->private_data = uda1380;
+ codec->name = "UDA1380";
+ codec->owner = THIS_MODULE;
+ codec->read = uda1380_read_reg_cache;
+ codec->write = uda1380_write;
+ codec->bias_level = SND_SOC_BIAS_OFF;
+ codec->set_bias_level = uda1380_set_bias_level;
+ codec->dai = uda1380_dai;
+ codec->num_dai = ARRAY_SIZE(uda1380_dai);
+ codec->reg_cache_size = ARRAY_SIZE(uda1380_reg);
+ codec->reg_cache = &uda1380->reg_cache;
+ codec->reg_cache_step = 1;
+
+ memcpy(codec->reg_cache, uda1380_reg, sizeof(uda1380_reg));
+
+ ret = uda1380_reset(codec);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to issue reset\n");
+ goto err_reset;
}
- memset(&info, 0, sizeof(struct i2c_board_info));
- info.addr = setup->i2c_address;
- strlcpy(info.type, "uda1380", I2C_NAME_SIZE);
+ INIT_WORK(&uda1380->work, uda1380_flush_work);
+
+ for (i = 0; i < ARRAY_SIZE(uda1380_dai); i++)
+ uda1380_dai[i].dev = codec->dev;
- adapter = i2c_get_adapter(setup->i2c_bus);
- if (!adapter) {
- dev_err(&pdev->dev, "can't get i2c adapter %d\n",
- setup->i2c_bus);
- goto err_driver;
+ uda1380_codec = codec;
+
+ ret = snd_soc_register_codec(codec);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+ goto err_reset;
}
- client = i2c_new_device(adapter, &info);
- i2c_put_adapter(adapter);
- if (!client) {
- dev_err(&pdev->dev, "can't add i2c device at 0x%x\n",
- (unsigned int)info.addr);
- goto err_driver;
+ ret = snd_soc_register_dais(uda1380_dai, ARRAY_SIZE(uda1380_dai));
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to register DAIs: %d\n", ret);
+ goto err_dai;
}
return 0;
-err_driver:
- i2c_del_driver(&uda1380_i2c_driver);
- return -ENODEV;
+err_dai:
+ snd_soc_unregister_codec(codec);
+err_reset:
+ gpio_set_value(pdata->gpio_power, 0);
+ gpio_free(pdata->gpio_reset);
+err_gpio:
+ gpio_free(pdata->gpio_power);
+err_out:
+ return ret;
}
-#endif
-static int uda1380_probe(struct platform_device *pdev)
+static void uda1380_unregister(struct uda1380_priv *uda1380)
{
- struct snd_soc_device *socdev = platform_get_drvdata(pdev);
- struct uda1380_setup_data *setup;
+ struct snd_soc_codec *codec = &uda1380->codec;
+ struct uda1380_platform_data *pdata = codec->dev->platform_data;
+
+ snd_soc_unregister_dais(uda1380_dai, ARRAY_SIZE(uda1380_dai));
+ snd_soc_unregister_codec(&uda1380->codec);
+
+ gpio_set_value(pdata->gpio_power, 0);
+ gpio_free(pdata->gpio_reset);
+ gpio_free(pdata->gpio_power);
+
+ kfree(uda1380);
+ uda1380_codec = NULL;
+}
+
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+static __devinit int uda1380_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct uda1380_priv *uda1380;
struct snd_soc_codec *codec;
int ret;
- setup = socdev->codec_data;
- codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
- if (codec == NULL)
+ uda1380 = kzalloc(sizeof(struct uda1380_priv), GFP_KERNEL);
+ if (uda1380 == NULL)
return -ENOMEM;
- socdev->card->codec = codec;
- mutex_init(&codec->mutex);
- INIT_LIST_HEAD(&codec->dapm_widgets);
- INIT_LIST_HEAD(&codec->dapm_paths);
+ codec = &uda1380->codec;
+ codec->hw_write = (hw_write_t)i2c_master_send;
- uda1380_socdev = socdev;
- ret = -ENODEV;
+ i2c_set_clientdata(i2c, uda1380);
+ codec->control_data = i2c;
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
- if (setup->i2c_address) {
- codec->hw_write = (hw_write_t)i2c_master_send;
- ret = uda1380_add_i2c_device(pdev, setup);
- }
-#endif
+ codec->dev = &i2c->dev;
+ ret = uda1380_register(uda1380);
if (ret != 0)
- kfree(codec);
+ kfree(uda1380);
+
return ret;
}
-/* power down chip */
-static int uda1380_remove(struct platform_device *pdev)
+static int __devexit uda1380_i2c_remove(struct i2c_client *i2c)
{
- struct snd_soc_device *socdev = platform_get_drvdata(pdev);
- struct snd_soc_codec *codec = socdev->card->codec;
-
- if (codec->control_data)
- uda1380_set_bias_level(codec, SND_SOC_BIAS_OFF);
-
- snd_soc_free_pcms(socdev);
- snd_soc_dapm_free(socdev);
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
- i2c_unregister_device(codec->control_data);
- i2c_del_driver(&uda1380_i2c_driver);
-#endif
- kfree(codec);
-
+ struct uda1380_priv *uda1380 = i2c_get_clientdata(i2c);
+ uda1380_unregister(uda1380);
return 0;
}
-struct snd_soc_codec_device soc_codec_dev_uda1380 = {
- .probe = uda1380_probe,
- .remove = uda1380_remove,
- .suspend = uda1380_suspend,
- .resume = uda1380_resume,
+static const struct i2c_device_id uda1380_i2c_id[] = {
+ { "uda1380", 0 },
+ { }
};
-EXPORT_SYMBOL_GPL(soc_codec_dev_uda1380);
+MODULE_DEVICE_TABLE(i2c, uda1380_i2c_id);
+
+static struct i2c_driver uda1380_i2c_driver = {
+ .driver = {
+ .name = "UDA1380 I2C Codec",
+ .owner = THIS_MODULE,
+ },
+ .probe = uda1380_i2c_probe,
+ .remove = __devexit_p(uda1380_i2c_remove),
+ .id_table = uda1380_i2c_id,
+};
+#endif
static int __init uda1380_modinit(void)
{
- return snd_soc_register_dais(uda1380_dai, ARRAY_SIZE(uda1380_dai));
+ int ret;
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+ ret = i2c_add_driver(&uda1380_i2c_driver);
+ if (ret != 0)
+ pr_err("Failed to register UDA1380 I2C driver: %d\n", ret);
+#endif
+ return 0;
}
module_init(uda1380_modinit);
static void __exit uda1380_exit(void)
{
- snd_soc_unregister_dais(uda1380_dai, ARRAY_SIZE(uda1380_dai));
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+ i2c_del_driver(&uda1380_i2c_driver);
+#endif
}
module_exit(uda1380_exit);
#define R22_SKIP_DCFIL 0x0002
#define R23_AGC_EN 0x0001
-struct uda1380_setup_data {
- int i2c_bus;
- unsigned short i2c_address;
- int dac_clk;
-#define UDA1380_DAC_CLK_SYSCLK 0
-#define UDA1380_DAC_CLK_WSPLL 1
-};
-
#define UDA1380_DAI_DUPLEX 0 /* playback and capture on single DAI */
#define UDA1380_DAI_PLAYBACK 1 /* playback DAI */
#define UDA1380_DAI_CAPTURE 2 /* capture DAI */
struct wm8350_jack_data hpl;
struct wm8350_jack_data hpr;
struct regulator_bulk_data supplies[ARRAY_SIZE(supply_names)];
+ int fll_freq_out;
+ int fll_freq_in;
};
static unsigned int wm8350_codec_cache_read(struct snd_soc_codec *codec,
static const char *wm8350_pol[] = { "Normal", "Inv R", "Inv L", "Inv L & R" };
static const char *wm8350_dacmutem[] = { "Normal", "Soft" };
static const char *wm8350_dacmutes[] = { "Fast", "Slow" };
-static const char *wm8350_dacfilter[] = { "Normal", "Sloping" };
static const char *wm8350_adcfilter[] = { "None", "High Pass" };
static const char *wm8350_adchp[] = { "44.1kHz", "8kHz", "16kHz", "32kHz" };
static const char *wm8350_lr[] = { "Left", "Right" };
SOC_ENUM_SINGLE(WM8350_DAC_CONTROL, 0, 4, wm8350_pol),
SOC_ENUM_SINGLE(WM8350_DAC_MUTE_VOLUME, 14, 2, wm8350_dacmutem),
SOC_ENUM_SINGLE(WM8350_DAC_MUTE_VOLUME, 13, 2, wm8350_dacmutes),
- SOC_ENUM_SINGLE(WM8350_DAC_MUTE_VOLUME, 12, 2, wm8350_dacfilter),
SOC_ENUM_SINGLE(WM8350_ADC_CONTROL, 15, 2, wm8350_adcfilter),
SOC_ENUM_SINGLE(WM8350_ADC_CONTROL, 8, 4, wm8350_adchp),
SOC_ENUM_SINGLE(WM8350_ADC_CONTROL, 0, 4, wm8350_pol),
0, 255, 0, dac_pcm_tlv),
SOC_ENUM("Playback PCM Mute Function", wm8350_enum[2]),
SOC_ENUM("Playback PCM Mute Speed", wm8350_enum[3]),
- SOC_ENUM("Playback PCM Filter", wm8350_enum[4]),
- SOC_ENUM("Capture PCM Filter", wm8350_enum[5]),
- SOC_ENUM("Capture PCM HP Filter", wm8350_enum[6]),
- SOC_ENUM("Capture ADC Inversion", wm8350_enum[7]),
+ SOC_ENUM("Capture PCM Filter", wm8350_enum[4]),
+ SOC_ENUM("Capture PCM HP Filter", wm8350_enum[5]),
+ SOC_ENUM("Capture ADC Inversion", wm8350_enum[6]),
SOC_WM8350_DOUBLE_R_TLV("Capture PCM Volume",
WM8350_ADC_DIGITAL_VOLUME_L,
WM8350_ADC_DIGITAL_VOLUME_R,
/* Out4 Capture Mux */
static const struct snd_kcontrol_new wm8350_out4_capture_controls =
-SOC_DAPM_ENUM("Route", wm8350_enum[8]);
+SOC_DAPM_ENUM("Route", wm8350_enum[7]);
static const struct snd_soc_dapm_widget wm8350_dapm_widgets[] = {
struct snd_soc_dai *codec_dai)
{
struct snd_soc_codec *codec = codec_dai->codec;
+ struct wm8350 *wm8350 = codec->control_data;
u16 iface = wm8350_codec_read(codec, WM8350_AI_FORMATING) &
~WM8350_AIF_WL_MASK;
}
wm8350_codec_write(codec, WM8350_AI_FORMATING, iface);
+
+ /* The sloping stopband filter is recommended for use with
+ * lower sample rates to improve performance.
+ */
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ if (params_rate(params) < 24000)
+ wm8350_set_bits(wm8350, WM8350_DAC_MUTE_VOLUME,
+ WM8350_DAC_SB_FILT);
+ else
+ wm8350_clear_bits(wm8350, WM8350_DAC_MUTE_VOLUME,
+ WM8350_DAC_SB_FILT);
+ }
+
return 0;
}
{
struct snd_soc_codec *codec = codec_dai->codec;
struct wm8350 *wm8350 = codec->control_data;
+ struct wm8350_data *priv = codec->private_data;
struct _fll_div fll_div;
int ret = 0;
u16 fll_1, fll_4;
+ if (freq_in == priv->fll_freq_in && freq_out == priv->fll_freq_out)
+ return 0;
+
/* power down FLL - we need to do this for reconfiguration */
wm8350_clear_bits(wm8350, WM8350_POWER_MGMT_4,
WM8350_FLL_ENA | WM8350_FLL_OSC_ENA);
wm8350_set_bits(wm8350, WM8350_POWER_MGMT_4, WM8350_FLL_OSC_ENA);
wm8350_set_bits(wm8350, WM8350_POWER_MGMT_4, WM8350_FLL_ENA);
+ priv->fll_freq_out = freq_out;
+ priv->fll_freq_in = freq_in;
+
return 0;
}
return 0;
}
+#ifdef CONFIG_PM
+static int wm8350_codec_suspend(struct platform_device *pdev, pm_message_t m)
+{
+ return snd_soc_suspend_device(&pdev->dev);
+}
+
+static int wm8350_codec_resume(struct platform_device *pdev)
+{
+ return snd_soc_resume_device(&pdev->dev);
+}
+#else
+#define wm8350_codec_suspend NULL
+#define wm8350_codec_resume NULL
+#endif
+
static struct platform_driver wm8350_codec_driver = {
.driver = {
.name = "wm8350-codec",
},
.probe = wm8350_codec_probe,
.remove = __devexit_p(wm8350_codec_remove),
+ .suspend = wm8350_codec_suspend,
+ .resume = wm8350_codec_resume,
};
static __init int wm8350_init(void)
if (freq_in == wm8400->fll_in && freq_out == wm8400->fll_out)
return 0;
- if (freq_out != 0) {
+ if (freq_out) {
ret = fll_factors(wm8400, &factors, freq_in, freq_out);
if (ret != 0)
return ret;
+ } else {
+ /* Bodge GCC 4.4.0 uninitialised variable warning - it
+ * doesn't seem capable of working out that we exit if
+ * freq_out is 0 before any of the uses. */
+ memset(&factors, 0, sizeof(factors));
}
wm8400->fll_out = freq_out;
reg &= ~WM8400_FLL_OSC_ENA;
wm8400_write(codec, WM8400_FLL_CONTROL_1, reg);
- if (freq_out == 0)
+ if (!freq_out)
return 0;
reg &= ~(WM8400_FLL_REF_FREQ | WM8400_FLL_FRATIO_MASK);
return 0;
}
+#ifdef CONFIG_PM
+static int wm8400_pdev_suspend(struct platform_device *pdev, pm_message_t msg)
+{
+ return snd_soc_suspend_device(&pdev->dev);
+}
+
+static int wm8400_pdev_resume(struct platform_device *pdev)
+{
+ return snd_soc_resume_device(&pdev->dev);
+}
+#else
+#define wm8400_pdev_suspend NULL
+#define wm8400_pdev_resume NULL
+#endif
+
static struct platform_driver wm8400_codec_driver = {
.driver = {
.name = "wm8400-codec",
},
.probe = wm8400_codec_probe,
.remove = __exit_p(wm8400_codec_remove),
+ .suspend = wm8400_pdev_suspend,
+ .resume = wm8400_pdev_resume,
};
static int __init wm8400_codec_init(void)
#define WM8510_POWER1_BIASEN 0x08
#define WM8510_POWER1_BUFIOEN 0x10
-/*
- * read wm8510 register cache
- */
-static inline unsigned int wm8510_read_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- u16 *cache = codec->reg_cache;
- if (reg == WM8510_RESET)
- return 0;
- if (reg >= WM8510_CACHEREGNUM)
- return -1;
- return cache[reg];
-}
-
-/*
- * write wm8510 register cache
- */
-static inline void wm8510_write_reg_cache(struct snd_soc_codec *codec,
- u16 reg, unsigned int value)
-{
- u16 *cache = codec->reg_cache;
- if (reg >= WM8510_CACHEREGNUM)
- return;
- cache[reg] = value;
-}
-
-/*
- * write to the WM8510 register space
- */
-static int wm8510_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u8 data[2];
-
- /* data is
- * D15..D9 WM8510 register offset
- * D8...D0 register data
- */
- data[0] = (reg << 1) | ((value >> 8) & 0x0001);
- data[1] = value & 0x00ff;
-
- wm8510_write_reg_cache(codec, reg, value);
- if (codec->hw_write(codec->control_data, data, 2) == 2)
- return 0;
- else
- return -EIO;
-}
-
-#define wm8510_reset(c) wm8510_write(c, WM8510_RESET, 0)
+#define wm8510_reset(c) snd_soc_write(c, WM8510_RESET, 0)
static const char *wm8510_companding[] = { "Off", "NC", "u-law", "A-law" };
static const char *wm8510_deemp[] = { "None", "32kHz", "44.1kHz", "48kHz" };
if (freq_in == 0 || freq_out == 0) {
/* Clock CODEC directly from MCLK */
- reg = wm8510_read_reg_cache(codec, WM8510_CLOCK);
- wm8510_write(codec, WM8510_CLOCK, reg & 0x0ff);
+ reg = snd_soc_read(codec, WM8510_CLOCK);
+ snd_soc_write(codec, WM8510_CLOCK, reg & 0x0ff);
/* Turn off PLL */
- reg = wm8510_read_reg_cache(codec, WM8510_POWER1);
- wm8510_write(codec, WM8510_POWER1, reg & 0x1df);
+ reg = snd_soc_read(codec, WM8510_POWER1);
+ snd_soc_write(codec, WM8510_POWER1, reg & 0x1df);
return 0;
}
pll_factors(freq_out*4, freq_in);
- wm8510_write(codec, WM8510_PLLN, (pll_div.pre_div << 4) | pll_div.n);
- wm8510_write(codec, WM8510_PLLK1, pll_div.k >> 18);
- wm8510_write(codec, WM8510_PLLK2, (pll_div.k >> 9) & 0x1ff);
- wm8510_write(codec, WM8510_PLLK3, pll_div.k & 0x1ff);
- reg = wm8510_read_reg_cache(codec, WM8510_POWER1);
- wm8510_write(codec, WM8510_POWER1, reg | 0x020);
+ snd_soc_write(codec, WM8510_PLLN, (pll_div.pre_div << 4) | pll_div.n);
+ snd_soc_write(codec, WM8510_PLLK1, pll_div.k >> 18);
+ snd_soc_write(codec, WM8510_PLLK2, (pll_div.k >> 9) & 0x1ff);
+ snd_soc_write(codec, WM8510_PLLK3, pll_div.k & 0x1ff);
+ reg = snd_soc_read(codec, WM8510_POWER1);
+ snd_soc_write(codec, WM8510_POWER1, reg | 0x020);
/* Run CODEC from PLL instead of MCLK */
- reg = wm8510_read_reg_cache(codec, WM8510_CLOCK);
- wm8510_write(codec, WM8510_CLOCK, reg | 0x100);
+ reg = snd_soc_read(codec, WM8510_CLOCK);
+ snd_soc_write(codec, WM8510_CLOCK, reg | 0x100);
return 0;
}
switch (div_id) {
case WM8510_OPCLKDIV:
- reg = wm8510_read_reg_cache(codec, WM8510_GPIO) & 0x1cf;
- wm8510_write(codec, WM8510_GPIO, reg | div);
+ reg = snd_soc_read(codec, WM8510_GPIO) & 0x1cf;
+ snd_soc_write(codec, WM8510_GPIO, reg | div);
break;
case WM8510_MCLKDIV:
- reg = wm8510_read_reg_cache(codec, WM8510_CLOCK) & 0x11f;
- wm8510_write(codec, WM8510_CLOCK, reg | div);
+ reg = snd_soc_read(codec, WM8510_CLOCK) & 0x11f;
+ snd_soc_write(codec, WM8510_CLOCK, reg | div);
break;
case WM8510_ADCCLK:
- reg = wm8510_read_reg_cache(codec, WM8510_ADC) & 0x1f7;
- wm8510_write(codec, WM8510_ADC, reg | div);
+ reg = snd_soc_read(codec, WM8510_ADC) & 0x1f7;
+ snd_soc_write(codec, WM8510_ADC, reg | div);
break;
case WM8510_DACCLK:
- reg = wm8510_read_reg_cache(codec, WM8510_DAC) & 0x1f7;
- wm8510_write(codec, WM8510_DAC, reg | div);
+ reg = snd_soc_read(codec, WM8510_DAC) & 0x1f7;
+ snd_soc_write(codec, WM8510_DAC, reg | div);
break;
case WM8510_BCLKDIV:
- reg = wm8510_read_reg_cache(codec, WM8510_CLOCK) & 0x1e3;
- wm8510_write(codec, WM8510_CLOCK, reg | div);
+ reg = snd_soc_read(codec, WM8510_CLOCK) & 0x1e3;
+ snd_soc_write(codec, WM8510_CLOCK, reg | div);
break;
default:
return -EINVAL;
{
struct snd_soc_codec *codec = codec_dai->codec;
u16 iface = 0;
- u16 clk = wm8510_read_reg_cache(codec, WM8510_CLOCK) & 0x1fe;
+ u16 clk = snd_soc_read(codec, WM8510_CLOCK) & 0x1fe;
/* set master/slave audio interface */
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
return -EINVAL;
}
- wm8510_write(codec, WM8510_IFACE, iface);
- wm8510_write(codec, WM8510_CLOCK, clk);
+ snd_soc_write(codec, WM8510_IFACE, iface);
+ snd_soc_write(codec, WM8510_CLOCK, clk);
return 0;
}
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = socdev->card->codec;
- u16 iface = wm8510_read_reg_cache(codec, WM8510_IFACE) & 0x19f;
- u16 adn = wm8510_read_reg_cache(codec, WM8510_ADD) & 0x1f1;
+ u16 iface = snd_soc_read(codec, WM8510_IFACE) & 0x19f;
+ u16 adn = snd_soc_read(codec, WM8510_ADD) & 0x1f1;
/* bit size */
switch (params_format(params)) {
break;
}
- wm8510_write(codec, WM8510_IFACE, iface);
- wm8510_write(codec, WM8510_ADD, adn);
+ snd_soc_write(codec, WM8510_IFACE, iface);
+ snd_soc_write(codec, WM8510_ADD, adn);
return 0;
}
static int wm8510_mute(struct snd_soc_dai *dai, int mute)
{
struct snd_soc_codec *codec = dai->codec;
- u16 mute_reg = wm8510_read_reg_cache(codec, WM8510_DAC) & 0xffbf;
+ u16 mute_reg = snd_soc_read(codec, WM8510_DAC) & 0xffbf;
if (mute)
- wm8510_write(codec, WM8510_DAC, mute_reg | 0x40);
+ snd_soc_write(codec, WM8510_DAC, mute_reg | 0x40);
else
- wm8510_write(codec, WM8510_DAC, mute_reg);
+ snd_soc_write(codec, WM8510_DAC, mute_reg);
return 0;
}
static int wm8510_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
- u16 power1 = wm8510_read_reg_cache(codec, WM8510_POWER1) & ~0x3;
+ u16 power1 = snd_soc_read(codec, WM8510_POWER1) & ~0x3;
switch (level) {
case SND_SOC_BIAS_ON:
case SND_SOC_BIAS_PREPARE:
power1 |= 0x1; /* VMID 50k */
- wm8510_write(codec, WM8510_POWER1, power1);
+ snd_soc_write(codec, WM8510_POWER1, power1);
break;
case SND_SOC_BIAS_STANDBY:
if (codec->bias_level == SND_SOC_BIAS_OFF) {
/* Initial cap charge at VMID 5k */
- wm8510_write(codec, WM8510_POWER1, power1 | 0x3);
+ snd_soc_write(codec, WM8510_POWER1, power1 | 0x3);
mdelay(100);
}
power1 |= 0x2; /* VMID 500k */
- wm8510_write(codec, WM8510_POWER1, power1);
+ snd_soc_write(codec, WM8510_POWER1, power1);
break;
case SND_SOC_BIAS_OFF:
- wm8510_write(codec, WM8510_POWER1, 0);
- wm8510_write(codec, WM8510_POWER2, 0);
- wm8510_write(codec, WM8510_POWER3, 0);
+ snd_soc_write(codec, WM8510_POWER1, 0);
+ snd_soc_write(codec, WM8510_POWER2, 0);
+ snd_soc_write(codec, WM8510_POWER3, 0);
break;
}
.rates = WM8510_RATES,
.formats = WM8510_FORMATS,},
.ops = &wm8510_dai_ops,
+ .symmetric_rates = 1,
};
EXPORT_SYMBOL_GPL(wm8510_dai);
* initialise the WM8510 driver
* register the mixer and dsp interfaces with the kernel
*/
-static int wm8510_init(struct snd_soc_device *socdev)
+static int wm8510_init(struct snd_soc_device *socdev,
+ enum snd_soc_control_type control)
{
struct snd_soc_codec *codec = socdev->card->codec;
int ret = 0;
codec->name = "WM8510";
codec->owner = THIS_MODULE;
- codec->read = wm8510_read_reg_cache;
- codec->write = wm8510_write;
codec->set_bias_level = wm8510_set_bias_level;
codec->dai = &wm8510_dai;
codec->num_dai = 1;
if (codec->reg_cache == NULL)
return -ENOMEM;
+ ret = snd_soc_codec_set_cache_io(codec, 7, 9, control);
+ if (ret < 0) {
+ printk(KERN_ERR "wm8510: failed to set cache I/O: %d\n",
+ ret);
+ goto err;
+ }
+
wm8510_reset(codec);
/* register pcms */
ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
if (ret < 0) {
printk(KERN_ERR "wm8510: failed to create pcms\n");
- goto pcm_err;
+ goto err;
}
/* power on device */
card_err:
snd_soc_free_pcms(socdev);
snd_soc_dapm_free(socdev);
-pcm_err:
+err:
kfree(codec->reg_cache);
return ret;
}
i2c_set_clientdata(i2c, codec);
codec->control_data = i2c;
- ret = wm8510_init(socdev);
+ ret = wm8510_init(socdev, SND_SOC_I2C);
if (ret < 0)
pr_err("failed to initialise WM8510\n");
codec->control_data = spi;
- ret = wm8510_init(socdev);
+ ret = wm8510_init(socdev, SND_SOC_SPI);
if (ret < 0)
dev_err(&spi->dev, "failed to initialise WM8510\n");
.probe = wm8510_spi_probe,
.remove = __devexit_p(wm8510_spi_remove),
};
-
-static int wm8510_spi_write(struct spi_device *spi, const char *data, int len)
-{
- struct spi_transfer t;
- struct spi_message m;
- u8 msg[2];
-
- if (len <= 0)
- return 0;
-
- msg[0] = data[0];
- msg[1] = data[1];
-
- spi_message_init(&m);
- memset(&t, 0, (sizeof t));
-
- t.tx_buf = &msg[0];
- t.len = len;
-
- spi_message_add_tail(&t, &m);
- spi_sync(spi, &m);
-
- return len;
-}
#endif /* CONFIG_SPI_MASTER */
static int wm8510_probe(struct platform_device *pdev)
wm8510_socdev = socdev;
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
if (setup->i2c_address) {
- codec->hw_write = (hw_write_t)i2c_master_send;
ret = wm8510_add_i2c_device(pdev, setup);
}
#endif
#if defined(CONFIG_SPI_MASTER)
if (setup->spi) {
- codec->hw_write = (hw_write_t)wm8510_spi_write;
ret = spi_register_driver(&wm8510_spi_driver);
if (ret != 0)
printk(KERN_ERR "can't add spi driver");
--- /dev/null
+/*
+ * wm8523.c -- WM8523 ALSA SoC Audio driver
+ *
+ * Copyright 2009 Wolfson Microelectronics plc
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include "wm8523.h"
+
+static struct snd_soc_codec *wm8523_codec;
+struct snd_soc_codec_device soc_codec_dev_wm8523;
+
+#define WM8523_NUM_SUPPLIES 2
+static const char *wm8523_supply_names[WM8523_NUM_SUPPLIES] = {
+ "AVDD",
+ "LINEVDD",
+};
+
+#define WM8523_NUM_RATES 7
+
+/* codec private data */
+struct wm8523_priv {
+ struct snd_soc_codec codec;
+ u16 reg_cache[WM8523_REGISTER_COUNT];
+ struct regulator_bulk_data supplies[WM8523_NUM_SUPPLIES];
+ unsigned int sysclk;
+ unsigned int rate_constraint_list[WM8523_NUM_RATES];
+ struct snd_pcm_hw_constraint_list rate_constraint;
+};
+
+static const u16 wm8523_reg[WM8523_REGISTER_COUNT] = {
+ 0x8523, /* R0 - DEVICE_ID */
+ 0x0001, /* R1 - REVISION */
+ 0x0000, /* R2 - PSCTRL1 */
+ 0x1812, /* R3 - AIF_CTRL1 */
+ 0x0000, /* R4 - AIF_CTRL2 */
+ 0x0001, /* R5 - DAC_CTRL3 */
+ 0x0190, /* R6 - DAC_GAINL */
+ 0x0190, /* R7 - DAC_GAINR */
+ 0x0000, /* R8 - ZERO_DETECT */
+};
+
+static int wm8523_volatile_register(unsigned int reg)
+{
+ switch (reg) {
+ case WM8523_DEVICE_ID:
+ case WM8523_REVISION:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
+static int wm8523_reset(struct snd_soc_codec *codec)
+{
+ return snd_soc_write(codec, WM8523_DEVICE_ID, 0);
+}
+
+static const DECLARE_TLV_DB_SCALE(dac_tlv, -10000, 25, 0);
+
+static const char *wm8523_zd_count_text[] = {
+ "1024",
+ "2048",
+};
+
+static const struct soc_enum wm8523_zc_count =
+ SOC_ENUM_SINGLE(WM8523_ZERO_DETECT, 0, 2, wm8523_zd_count_text);
+
+static const struct snd_kcontrol_new wm8523_snd_controls[] = {
+SOC_DOUBLE_R_TLV("Playback Volume", WM8523_DAC_GAINL, WM8523_DAC_GAINR,
+ 0, 448, 0, dac_tlv),
+SOC_SINGLE("ZC Switch", WM8523_DAC_CTRL3, 4, 1, 0),
+SOC_SINGLE("Playback Deemphasis Switch", WM8523_AIF_CTRL1, 8, 1, 0),
+SOC_DOUBLE("Playback Switch", WM8523_DAC_CTRL3, 2, 3, 1, 1),
+SOC_SINGLE("Volume Ramp Up Switch", WM8523_DAC_CTRL3, 1, 1, 0),
+SOC_SINGLE("Volume Ramp Down Switch", WM8523_DAC_CTRL3, 0, 1, 0),
+SOC_ENUM("Zero Detect Count", wm8523_zc_count),
+};
+
+static const struct snd_soc_dapm_widget wm8523_dapm_widgets[] = {
+SND_SOC_DAPM_DAC("DAC", "Playback", SND_SOC_NOPM, 0, 0),
+SND_SOC_DAPM_OUTPUT("LINEVOUTL"),
+SND_SOC_DAPM_OUTPUT("LINEVOUTR"),
+};
+
+static const struct snd_soc_dapm_route intercon[] = {
+ { "LINEVOUTL", NULL, "DAC" },
+ { "LINEVOUTR", NULL, "DAC" },
+};
+
+static int wm8523_add_widgets(struct snd_soc_codec *codec)
+{
+ snd_soc_dapm_new_controls(codec, wm8523_dapm_widgets,
+ ARRAY_SIZE(wm8523_dapm_widgets));
+
+ snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon));
+
+ snd_soc_dapm_new_widgets(codec);
+ return 0;
+}
+
+static struct {
+ int value;
+ int ratio;
+} lrclk_ratios[WM8523_NUM_RATES] = {
+ { 1, 128 },
+ { 2, 192 },
+ { 3, 256 },
+ { 4, 384 },
+ { 5, 512 },
+ { 6, 768 },
+ { 7, 1152 },
+};
+
+static int wm8523_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct wm8523_priv *wm8523 = codec->private_data;
+
+ /* The set of sample rates that can be supported depends on the
+ * MCLK supplied to the CODEC - enforce this.
+ */
+ if (!wm8523->sysclk) {
+ dev_err(codec->dev,
+ "No MCLK configured, call set_sysclk() on init\n");
+ return -EINVAL;
+ }
+
+ return 0;
+ snd_pcm_hw_constraint_list(substream->runtime, 0,
+ SNDRV_PCM_HW_PARAM_RATE,
+ &wm8523->rate_constraint);
+
+ return 0;
+}
+
+static int wm8523_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_device *socdev = rtd->socdev;
+ struct snd_soc_codec *codec = socdev->card->codec;
+ struct wm8523_priv *wm8523 = codec->private_data;
+ int i;
+ u16 aifctrl1 = snd_soc_read(codec, WM8523_AIF_CTRL1);
+ u16 aifctrl2 = snd_soc_read(codec, WM8523_AIF_CTRL2);
+
+ /* Find a supported LRCLK ratio */
+ for (i = 0; i < ARRAY_SIZE(lrclk_ratios); i++) {
+ if (wm8523->sysclk / params_rate(params) ==
+ lrclk_ratios[i].ratio)
+ break;
+ }
+
+ /* Should never happen, should be handled by constraints */
+ if (i == ARRAY_SIZE(lrclk_ratios)) {
+ dev_err(codec->dev, "MCLK/fs ratio %d unsupported\n",
+ wm8523->sysclk / params_rate(params));
+ return -EINVAL;
+ }
+
+ aifctrl2 &= ~WM8523_SR_MASK;
+ aifctrl2 |= lrclk_ratios[i].value;
+
+ aifctrl1 &= ~WM8523_WL_MASK;
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ aifctrl1 |= 0x8;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ aifctrl1 |= 0x10;
+ break;
+ case SNDRV_PCM_FORMAT_S32_LE:
+ aifctrl1 |= 0x18;
+ break;
+ }
+
+ snd_soc_write(codec, WM8523_AIF_CTRL1, aifctrl1);
+ snd_soc_write(codec, WM8523_AIF_CTRL2, aifctrl2);
+
+ return 0;
+}
+
+static int wm8523_set_dai_sysclk(struct snd_soc_dai *codec_dai,
+ int clk_id, unsigned int freq, int dir)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ struct wm8523_priv *wm8523 = codec->private_data;
+ unsigned int val;
+ int i;
+
+ wm8523->sysclk = freq;
+
+ wm8523->rate_constraint.count = 0;
+ for (i = 0; i < ARRAY_SIZE(lrclk_ratios); i++) {
+ val = freq / lrclk_ratios[i].ratio;
+ /* Check that it's a standard rate since core can't
+ * cope with others and having the odd rates confuses
+ * constraint matching.
+ */
+ switch (val) {
+ case 8000:
+ case 11025:
+ case 16000:
+ case 22050:
+ case 32000:
+ case 44100:
+ case 48000:
+ case 64000:
+ case 88200:
+ case 96000:
+ case 176400:
+ case 192000:
+ dev_dbg(codec->dev, "Supported sample rate: %dHz\n",
+ val);
+ wm8523->rate_constraint_list[i] = val;
+ wm8523->rate_constraint.count++;
+ break;
+ default:
+ dev_dbg(codec->dev, "Skipping sample rate: %dHz\n",
+ val);
+ }
+ }
+
+ /* Need at least one supported rate... */
+ if (wm8523->rate_constraint.count == 0)
+ return -EINVAL;
+
+ return 0;
+}
+
+
+static int wm8523_set_dai_fmt(struct snd_soc_dai *codec_dai,
+ unsigned int fmt)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ u16 aifctrl1 = snd_soc_read(codec, WM8523_AIF_CTRL1);
+
+ aifctrl1 &= ~(WM8523_BCLK_INV_MASK | WM8523_LRCLK_INV_MASK |
+ WM8523_FMT_MASK | WM8523_AIF_MSTR_MASK);
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBM_CFM:
+ aifctrl1 |= WM8523_AIF_MSTR;
+ break;
+ case SND_SOC_DAIFMT_CBS_CFS:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ aifctrl1 |= 0x0002;
+ break;
+ case SND_SOC_DAIFMT_RIGHT_J:
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ aifctrl1 |= 0x0001;
+ break;
+ case SND_SOC_DAIFMT_DSP_A:
+ aifctrl1 |= 0x0003;
+ break;
+ case SND_SOC_DAIFMT_DSP_B:
+ aifctrl1 |= 0x0023;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_IF:
+ aifctrl1 |= WM8523_BCLK_INV | WM8523_LRCLK_INV;
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ aifctrl1 |= WM8523_BCLK_INV;
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ aifctrl1 |= WM8523_LRCLK_INV;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ snd_soc_write(codec, WM8523_AIF_CTRL1, aifctrl1);
+
+ return 0;
+}
+
+static int wm8523_set_bias_level(struct snd_soc_codec *codec,
+ enum snd_soc_bias_level level)
+{
+ struct wm8523_priv *wm8523 = codec->private_data;
+ int ret, i;
+
+ switch (level) {
+ case SND_SOC_BIAS_ON:
+ break;
+
+ case SND_SOC_BIAS_PREPARE:
+ /* Full power on */
+ snd_soc_update_bits(codec, WM8523_PSCTRL1,
+ WM8523_SYS_ENA_MASK, 3);
+ break;
+
+ case SND_SOC_BIAS_STANDBY:
+ if (codec->bias_level == SND_SOC_BIAS_OFF) {
+ ret = regulator_bulk_enable(ARRAY_SIZE(wm8523->supplies),
+ wm8523->supplies);
+ if (ret != 0) {
+ dev_err(codec->dev,
+ "Failed to enable supplies: %d\n",
+ ret);
+ return ret;
+ }
+
+ /* Initial power up */
+ snd_soc_update_bits(codec, WM8523_PSCTRL1,
+ WM8523_SYS_ENA_MASK, 1);
+
+ /* Sync back default/cached values */
+ for (i = WM8523_AIF_CTRL1;
+ i < WM8523_MAX_REGISTER; i++)
+ snd_soc_write(codec, i, wm8523->reg_cache[i]);
+
+
+ msleep(100);
+ }
+
+ /* Power up to mute */
+ snd_soc_update_bits(codec, WM8523_PSCTRL1,
+ WM8523_SYS_ENA_MASK, 2);
+
+ break;
+
+ case SND_SOC_BIAS_OFF:
+ /* The chip runs through the power down sequence for us. */
+ snd_soc_update_bits(codec, WM8523_PSCTRL1,
+ WM8523_SYS_ENA_MASK, 0);
+ msleep(100);
+
+ regulator_bulk_disable(ARRAY_SIZE(wm8523->supplies),
+ wm8523->supplies);
+ break;
+ }
+ codec->bias_level = level;
+ return 0;
+}
+
+#define WM8523_RATES SNDRV_PCM_RATE_8000_192000
+
+#define WM8523_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
+ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
+
+static struct snd_soc_dai_ops wm8523_dai_ops = {
+ .startup = wm8523_startup,
+ .hw_params = wm8523_hw_params,
+ .set_sysclk = wm8523_set_dai_sysclk,
+ .set_fmt = wm8523_set_dai_fmt,
+};
+
+struct snd_soc_dai wm8523_dai = {
+ .name = "WM8523",
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 2, /* Mono modes not yet supported */
+ .channels_max = 2,
+ .rates = WM8523_RATES,
+ .formats = WM8523_FORMATS,
+ },
+ .ops = &wm8523_dai_ops,
+};
+EXPORT_SYMBOL_GPL(wm8523_dai);
+
+#ifdef CONFIG_PM
+static int wm8523_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->card->codec;
+
+ wm8523_set_bias_level(codec, SND_SOC_BIAS_OFF);
+ return 0;
+}
+
+static int wm8523_resume(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->card->codec;
+
+ wm8523_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+ return 0;
+}
+#else
+#define wm8523_suspend NULL
+#define wm8523_resume NULL
+#endif
+
+static int wm8523_probe(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec;
+ int ret = 0;
+
+ if (wm8523_codec == NULL) {
+ dev_err(&pdev->dev, "Codec device not registered\n");
+ return -ENODEV;
+ }
+
+ socdev->card->codec = wm8523_codec;
+ codec = wm8523_codec;
+
+ /* register pcms */
+ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+ if (ret < 0) {
+ dev_err(codec->dev, "failed to create pcms: %d\n", ret);
+ goto pcm_err;
+ }
+
+ snd_soc_add_controls(codec, wm8523_snd_controls,
+ ARRAY_SIZE(wm8523_snd_controls));
+ wm8523_add_widgets(codec);
+ ret = snd_soc_init_card(socdev);
+ if (ret < 0) {
+ dev_err(codec->dev, "failed to register card: %d\n", ret);
+ goto card_err;
+ }
+
+ return ret;
+
+card_err:
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+pcm_err:
+ return ret;
+}
+
+static int wm8523_remove(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+
+ return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_wm8523 = {
+ .probe = wm8523_probe,
+ .remove = wm8523_remove,
+ .suspend = wm8523_suspend,
+ .resume = wm8523_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm8523);
+
+static int wm8523_register(struct wm8523_priv *wm8523,
+ enum snd_soc_control_type control)
+{
+ int ret;
+ struct snd_soc_codec *codec = &wm8523->codec;
+ int i;
+
+ if (wm8523_codec) {
+ dev_err(codec->dev, "Another WM8523 is registered\n");
+ return -EINVAL;
+ }
+
+ mutex_init(&codec->mutex);
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
+
+ codec->private_data = wm8523;
+ codec->name = "WM8523";
+ codec->owner = THIS_MODULE;
+ codec->bias_level = SND_SOC_BIAS_OFF;
+ codec->set_bias_level = wm8523_set_bias_level;
+ codec->dai = &wm8523_dai;
+ codec->num_dai = 1;
+ codec->reg_cache_size = WM8523_REGISTER_COUNT;
+ codec->reg_cache = &wm8523->reg_cache;
+ codec->volatile_register = wm8523_volatile_register;
+
+ wm8523->rate_constraint.list = &wm8523->rate_constraint_list[0];
+ wm8523->rate_constraint.count =
+ ARRAY_SIZE(wm8523->rate_constraint_list);
+
+ memcpy(codec->reg_cache, wm8523_reg, sizeof(wm8523_reg));
+
+ ret = snd_soc_codec_set_cache_io(codec, 8, 16, control);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+ goto err;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(wm8523->supplies); i++)
+ wm8523->supplies[i].supply = wm8523_supply_names[i];
+
+ ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8523->supplies),
+ wm8523->supplies);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to request supplies: %d\n", ret);
+ goto err;
+ }
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(wm8523->supplies),
+ wm8523->supplies);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to enable supplies: %d\n", ret);
+ goto err_get;
+ }
+
+ ret = snd_soc_read(codec, WM8523_DEVICE_ID);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to read ID register\n");
+ goto err_enable;
+ }
+ if (ret != wm8523_reg[WM8523_DEVICE_ID]) {
+ dev_err(codec->dev, "Device is not a WM8523, ID is %x\n", ret);
+ ret = -EINVAL;
+ goto err_enable;
+ }
+
+ ret = snd_soc_read(codec, WM8523_REVISION);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to read revision register\n");
+ goto err_enable;
+ }
+ dev_info(codec->dev, "revision %c\n",
+ (ret & WM8523_CHIP_REV_MASK) + 'A');
+
+ ret = wm8523_reset(codec);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to issue reset\n");
+ goto err_enable;
+ }
+
+ wm8523_dai.dev = codec->dev;
+
+ /* Change some default settings - latch VU and enable ZC */
+ wm8523->reg_cache[WM8523_DAC_GAINR] |= WM8523_DACR_VU;
+ wm8523->reg_cache[WM8523_DAC_CTRL3] |= WM8523_ZC;
+
+ wm8523_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+ /* Bias level configuration will have done an extra enable */
+ regulator_bulk_disable(ARRAY_SIZE(wm8523->supplies), wm8523->supplies);
+
+ wm8523_codec = codec;
+
+ ret = snd_soc_register_codec(codec);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+ return ret;
+ }
+
+ ret = snd_soc_register_dai(&wm8523_dai);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
+ snd_soc_unregister_codec(codec);
+ return ret;
+ }
+
+ return 0;
+
+err_enable:
+ regulator_bulk_disable(ARRAY_SIZE(wm8523->supplies), wm8523->supplies);
+err_get:
+ regulator_bulk_free(ARRAY_SIZE(wm8523->supplies), wm8523->supplies);
+err:
+ kfree(wm8523);
+ return ret;
+}
+
+static void wm8523_unregister(struct wm8523_priv *wm8523)
+{
+ wm8523_set_bias_level(&wm8523->codec, SND_SOC_BIAS_OFF);
+ regulator_bulk_free(ARRAY_SIZE(wm8523->supplies), wm8523->supplies);
+ snd_soc_unregister_dai(&wm8523_dai);
+ snd_soc_unregister_codec(&wm8523->codec);
+ kfree(wm8523);
+ wm8523_codec = NULL;
+}
+
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+static __devinit int wm8523_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct wm8523_priv *wm8523;
+ struct snd_soc_codec *codec;
+
+ wm8523 = kzalloc(sizeof(struct wm8523_priv), GFP_KERNEL);
+ if (wm8523 == NULL)
+ return -ENOMEM;
+
+ codec = &wm8523->codec;
+ codec->hw_write = (hw_write_t)i2c_master_send;
+
+ i2c_set_clientdata(i2c, wm8523);
+ codec->control_data = i2c;
+
+ codec->dev = &i2c->dev;
+
+ return wm8523_register(wm8523, SND_SOC_I2C);
+}
+
+static __devexit int wm8523_i2c_remove(struct i2c_client *client)
+{
+ struct wm8523_priv *wm8523 = i2c_get_clientdata(client);
+ wm8523_unregister(wm8523);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int wm8523_i2c_suspend(struct i2c_client *i2c, pm_message_t msg)
+{
+ return snd_soc_suspend_device(&i2c->dev);
+}
+
+static int wm8523_i2c_resume(struct i2c_client *i2c)
+{
+ return snd_soc_resume_device(&i2c->dev);
+}
+#else
+#define wm8523_i2c_suspend NULL
+#define wm8523_i2c_resume NULL
+#endif
+
+static const struct i2c_device_id wm8523_i2c_id[] = {
+ { "wm8523", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, wm8523_i2c_id);
+
+static struct i2c_driver wm8523_i2c_driver = {
+ .driver = {
+ .name = "WM8523",
+ .owner = THIS_MODULE,
+ },
+ .probe = wm8523_i2c_probe,
+ .remove = __devexit_p(wm8523_i2c_remove),
+ .suspend = wm8523_i2c_suspend,
+ .resume = wm8523_i2c_resume,
+ .id_table = wm8523_i2c_id,
+};
+#endif
+
+static int __init wm8523_modinit(void)
+{
+ int ret;
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+ ret = i2c_add_driver(&wm8523_i2c_driver);
+ if (ret != 0) {
+ printk(KERN_ERR "Failed to register WM8523 I2C driver: %d\n",
+ ret);
+ }
+#endif
+ return 0;
+}
+module_init(wm8523_modinit);
+
+static void __exit wm8523_exit(void)
+{
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+ i2c_del_driver(&wm8523_i2c_driver);
+#endif
+}
+module_exit(wm8523_exit);
+
+MODULE_DESCRIPTION("ASoC WM8523 driver");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * wm8523.h -- WM8423 ASoC driver
+ *
+ * Copyright 2009 Wolfson Microelectronics, plc
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * Based on wm8753.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _WM8523_H
+#define _WM8523_H
+
+/*
+ * Register values.
+ */
+#define WM8523_DEVICE_ID 0x00
+#define WM8523_REVISION 0x01
+#define WM8523_PSCTRL1 0x02
+#define WM8523_AIF_CTRL1 0x03
+#define WM8523_AIF_CTRL2 0x04
+#define WM8523_DAC_CTRL3 0x05
+#define WM8523_DAC_GAINL 0x06
+#define WM8523_DAC_GAINR 0x07
+#define WM8523_ZERO_DETECT 0x08
+
+#define WM8523_REGISTER_COUNT 9
+#define WM8523_MAX_REGISTER 0x08
+
+/*
+ * Field Definitions.
+ */
+
+/*
+ * R0 (0x00) - DEVICE_ID
+ */
+#define WM8523_CHIP_ID_MASK 0xFFFF /* CHIP_ID - [15:0] */
+#define WM8523_CHIP_ID_SHIFT 0 /* CHIP_ID - [15:0] */
+#define WM8523_CHIP_ID_WIDTH 16 /* CHIP_ID - [15:0] */
+
+/*
+ * R1 (0x01) - REVISION
+ */
+#define WM8523_CHIP_REV_MASK 0x0007 /* CHIP_REV - [2:0] */
+#define WM8523_CHIP_REV_SHIFT 0 /* CHIP_REV - [2:0] */
+#define WM8523_CHIP_REV_WIDTH 3 /* CHIP_REV - [2:0] */
+
+/*
+ * R2 (0x02) - PSCTRL1
+ */
+#define WM8523_SYS_ENA_MASK 0x0003 /* SYS_ENA - [1:0] */
+#define WM8523_SYS_ENA_SHIFT 0 /* SYS_ENA - [1:0] */
+#define WM8523_SYS_ENA_WIDTH 2 /* SYS_ENA - [1:0] */
+
+/*
+ * R3 (0x03) - AIF_CTRL1
+ */
+#define WM8523_TDM_MODE_MASK 0x1800 /* TDM_MODE - [12:11] */
+#define WM8523_TDM_MODE_SHIFT 11 /* TDM_MODE - [12:11] */
+#define WM8523_TDM_MODE_WIDTH 2 /* TDM_MODE - [12:11] */
+#define WM8523_TDM_SLOT_MASK 0x0600 /* TDM_SLOT - [10:9] */
+#define WM8523_TDM_SLOT_SHIFT 9 /* TDM_SLOT - [10:9] */
+#define WM8523_TDM_SLOT_WIDTH 2 /* TDM_SLOT - [10:9] */
+#define WM8523_DEEMPH 0x0100 /* DEEMPH */
+#define WM8523_DEEMPH_MASK 0x0100 /* DEEMPH */
+#define WM8523_DEEMPH_SHIFT 8 /* DEEMPH */
+#define WM8523_DEEMPH_WIDTH 1 /* DEEMPH */
+#define WM8523_AIF_MSTR 0x0080 /* AIF_MSTR */
+#define WM8523_AIF_MSTR_MASK 0x0080 /* AIF_MSTR */
+#define WM8523_AIF_MSTR_SHIFT 7 /* AIF_MSTR */
+#define WM8523_AIF_MSTR_WIDTH 1 /* AIF_MSTR */
+#define WM8523_LRCLK_INV 0x0040 /* LRCLK_INV */
+#define WM8523_LRCLK_INV_MASK 0x0040 /* LRCLK_INV */
+#define WM8523_LRCLK_INV_SHIFT 6 /* LRCLK_INV */
+#define WM8523_LRCLK_INV_WIDTH 1 /* LRCLK_INV */
+#define WM8523_BCLK_INV 0x0020 /* BCLK_INV */
+#define WM8523_BCLK_INV_MASK 0x0020 /* BCLK_INV */
+#define WM8523_BCLK_INV_SHIFT 5 /* BCLK_INV */
+#define WM8523_BCLK_INV_WIDTH 1 /* BCLK_INV */
+#define WM8523_WL_MASK 0x0018 /* WL - [4:3] */
+#define WM8523_WL_SHIFT 3 /* WL - [4:3] */
+#define WM8523_WL_WIDTH 2 /* WL - [4:3] */
+#define WM8523_FMT_MASK 0x0007 /* FMT - [2:0] */
+#define WM8523_FMT_SHIFT 0 /* FMT - [2:0] */
+#define WM8523_FMT_WIDTH 3 /* FMT - [2:0] */
+
+/*
+ * R4 (0x04) - AIF_CTRL2
+ */
+#define WM8523_DAC_OP_MUX_MASK 0x00C0 /* DAC_OP_MUX - [7:6] */
+#define WM8523_DAC_OP_MUX_SHIFT 6 /* DAC_OP_MUX - [7:6] */
+#define WM8523_DAC_OP_MUX_WIDTH 2 /* DAC_OP_MUX - [7:6] */
+#define WM8523_BCLKDIV_MASK 0x0038 /* BCLKDIV - [5:3] */
+#define WM8523_BCLKDIV_SHIFT 3 /* BCLKDIV - [5:3] */
+#define WM8523_BCLKDIV_WIDTH 3 /* BCLKDIV - [5:3] */
+#define WM8523_SR_MASK 0x0007 /* SR - [2:0] */
+#define WM8523_SR_SHIFT 0 /* SR - [2:0] */
+#define WM8523_SR_WIDTH 3 /* SR - [2:0] */
+
+/*
+ * R5 (0x05) - DAC_CTRL3
+ */
+#define WM8523_ZC 0x0010 /* ZC */
+#define WM8523_ZC_MASK 0x0010 /* ZC */
+#define WM8523_ZC_SHIFT 4 /* ZC */
+#define WM8523_ZC_WIDTH 1 /* ZC */
+#define WM8523_DACR 0x0008 /* DACR */
+#define WM8523_DACR_MASK 0x0008 /* DACR */
+#define WM8523_DACR_SHIFT 3 /* DACR */
+#define WM8523_DACR_WIDTH 1 /* DACR */
+#define WM8523_DACL 0x0004 /* DACL */
+#define WM8523_DACL_MASK 0x0004 /* DACL */
+#define WM8523_DACL_SHIFT 2 /* DACL */
+#define WM8523_DACL_WIDTH 1 /* DACL */
+#define WM8523_VOL_UP_RAMP 0x0002 /* VOL_UP_RAMP */
+#define WM8523_VOL_UP_RAMP_MASK 0x0002 /* VOL_UP_RAMP */
+#define WM8523_VOL_UP_RAMP_SHIFT 1 /* VOL_UP_RAMP */
+#define WM8523_VOL_UP_RAMP_WIDTH 1 /* VOL_UP_RAMP */
+#define WM8523_VOL_DOWN_RAMP 0x0001 /* VOL_DOWN_RAMP */
+#define WM8523_VOL_DOWN_RAMP_MASK 0x0001 /* VOL_DOWN_RAMP */
+#define WM8523_VOL_DOWN_RAMP_SHIFT 0 /* VOL_DOWN_RAMP */
+#define WM8523_VOL_DOWN_RAMP_WIDTH 1 /* VOL_DOWN_RAMP */
+
+/*
+ * R6 (0x06) - DAC_GAINL
+ */
+#define WM8523_DACL_VU 0x0200 /* DACL_VU */
+#define WM8523_DACL_VU_MASK 0x0200 /* DACL_VU */
+#define WM8523_DACL_VU_SHIFT 9 /* DACL_VU */
+#define WM8523_DACL_VU_WIDTH 1 /* DACL_VU */
+#define WM8523_DACL_VOL_MASK 0x01FF /* DACL_VOL - [8:0] */
+#define WM8523_DACL_VOL_SHIFT 0 /* DACL_VOL - [8:0] */
+#define WM8523_DACL_VOL_WIDTH 9 /* DACL_VOL - [8:0] */
+
+/*
+ * R7 (0x07) - DAC_GAINR
+ */
+#define WM8523_DACR_VU 0x0200 /* DACR_VU */
+#define WM8523_DACR_VU_MASK 0x0200 /* DACR_VU */
+#define WM8523_DACR_VU_SHIFT 9 /* DACR_VU */
+#define WM8523_DACR_VU_WIDTH 1 /* DACR_VU */
+#define WM8523_DACR_VOL_MASK 0x01FF /* DACR_VOL - [8:0] */
+#define WM8523_DACR_VOL_SHIFT 0 /* DACR_VOL - [8:0] */
+#define WM8523_DACR_VOL_WIDTH 9 /* DACR_VOL - [8:0] */
+
+/*
+ * R8 (0x08) - ZERO_DETECT
+ */
+#define WM8523_ZD_COUNT_MASK 0x0003 /* ZD_COUNT - [1:0] */
+#define WM8523_ZD_COUNT_SHIFT 0 /* ZD_COUNT - [1:0] */
+#define WM8523_ZD_COUNT_WIDTH 2 /* ZD_COUNT - [1:0] */
+
+extern struct snd_soc_dai wm8523_dai;
+extern struct snd_soc_codec_device soc_codec_dev_wm8523;
+
+#endif
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
unsigned int out;
};
+#define WM8580_NUM_SUPPLIES 3
+static const char *wm8580_supply_names[WM8580_NUM_SUPPLIES] = {
+ "AVDD",
+ "DVDD",
+ "PVDD",
+};
+
/* codec private data */
struct wm8580_priv {
struct snd_soc_codec codec;
+ struct regulator_bulk_data supplies[WM8580_NUM_SUPPLIES];
u16 reg_cache[WM8580_MAX_REGISTER + 1];
struct pll_state a;
struct pll_state b;
};
-
-/*
- * read wm8580 register cache
- */
-static inline unsigned int wm8580_read_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- u16 *cache = codec->reg_cache;
- BUG_ON(reg >= ARRAY_SIZE(wm8580_reg));
- return cache[reg];
-}
-
-/*
- * write wm8580 register cache
- */
-static inline void wm8580_write_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg, unsigned int value)
-{
- u16 *cache = codec->reg_cache;
-
- cache[reg] = value;
-}
-
-/*
- * write to the WM8580 register space
- */
-static int wm8580_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u8 data[2];
-
- BUG_ON(reg >= ARRAY_SIZE(wm8580_reg));
-
- /* Registers are 9 bits wide */
- value &= 0x1ff;
-
- switch (reg) {
- case WM8580_RESET:
- /* Uncached */
- break;
- default:
- if (value == wm8580_read_reg_cache(codec, reg))
- return 0;
- }
-
- /* data is
- * D15..D9 WM8580 register offset
- * D8...D0 register data
- */
- data[0] = (reg << 1) | ((value >> 8) & 0x0001);
- data[1] = value & 0x00ff;
-
- wm8580_write_reg_cache(codec, reg, value);
- if (codec->hw_write(codec->control_data, data, 2) == 2)
- return 0;
- else
- return -EIO;
-}
-
-static inline unsigned int wm8580_read(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- switch (reg) {
- default:
- return wm8580_read_reg_cache(codec, reg);
- }
-}
-
static const DECLARE_TLV_DB_SCALE(dac_tlv, -12750, 50, 1);
static int wm8580_out_vu(struct snd_kcontrol *kcontrol,
struct soc_mixer_control *mc =
(struct soc_mixer_control *)kcontrol->private_value;
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ u16 *reg_cache = codec->reg_cache;
unsigned int reg = mc->reg;
unsigned int reg2 = mc->rreg;
int ret;
- u16 val;
/* Clear the register cache so we write without VU set */
- wm8580_write_reg_cache(codec, reg, 0);
- wm8580_write_reg_cache(codec, reg2, 0);
+ reg_cache[reg] = 0;
+ reg_cache[reg2] = 0;
ret = snd_soc_put_volsw_2r(kcontrol, ucontrol);
if (ret < 0)
return ret;
/* Now write again with the volume update bit set */
- val = wm8580_read_reg_cache(codec, reg);
- wm8580_write(codec, reg, val | 0x0100);
-
- val = wm8580_read_reg_cache(codec, reg2);
- wm8580_write(codec, reg2, val | 0x0100);
+ snd_soc_update_bits(codec, reg, 0x100, 0x100);
+ snd_soc_update_bits(codec, reg2, 0x100, 0x100);
return 0;
}
/* Always disable the PLL - it is not safe to leave it running
* while reprogramming it.
*/
- reg = wm8580_read(codec, WM8580_PWRDN2);
- wm8580_write(codec, WM8580_PWRDN2, reg | pwr_mask);
+ reg = snd_soc_read(codec, WM8580_PWRDN2);
+ snd_soc_write(codec, WM8580_PWRDN2, reg | pwr_mask);
if (!freq_in || !freq_out)
return 0;
- wm8580_write(codec, WM8580_PLLA1 + offset, pll_div.k & 0x1ff);
- wm8580_write(codec, WM8580_PLLA2 + offset, (pll_div.k >> 9) & 0xff);
- wm8580_write(codec, WM8580_PLLA3 + offset,
+ snd_soc_write(codec, WM8580_PLLA1 + offset, pll_div.k & 0x1ff);
+ snd_soc_write(codec, WM8580_PLLA2 + offset, (pll_div.k >> 9) & 0x1ff);
+ snd_soc_write(codec, WM8580_PLLA3 + offset,
(pll_div.k >> 18 & 0xf) | (pll_div.n << 4));
- reg = wm8580_read(codec, WM8580_PLLA4 + offset);
- reg &= ~0x3f;
+ reg = snd_soc_read(codec, WM8580_PLLA4 + offset);
+ reg &= ~0x1b;
reg |= pll_div.prescale | pll_div.postscale << 1 |
pll_div.freqmode << 3;
- wm8580_write(codec, WM8580_PLLA4 + offset, reg);
+ snd_soc_write(codec, WM8580_PLLA4 + offset, reg);
/* All done, turn it on */
- reg = wm8580_read(codec, WM8580_PWRDN2);
- wm8580_write(codec, WM8580_PWRDN2, reg & ~pwr_mask);
+ reg = snd_soc_read(codec, WM8580_PWRDN2);
+ snd_soc_write(codec, WM8580_PWRDN2, reg & ~pwr_mask);
return 0;
}
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = socdev->card->codec;
- u16 paifb = wm8580_read(codec, WM8580_PAIF3 + dai->id);
+ u16 paifb = snd_soc_read(codec, WM8580_PAIF3 + dai->id);
paifb &= ~WM8580_AIF_LENGTH_MASK;
/* bit size */
return -EINVAL;
}
- wm8580_write(codec, WM8580_PAIF3 + dai->id, paifb);
+ snd_soc_write(codec, WM8580_PAIF3 + dai->id, paifb);
return 0;
}
unsigned int aifb;
int can_invert_lrclk;
- aifa = wm8580_read(codec, WM8580_PAIF1 + codec_dai->id);
- aifb = wm8580_read(codec, WM8580_PAIF3 + codec_dai->id);
+ aifa = snd_soc_read(codec, WM8580_PAIF1 + codec_dai->id);
+ aifb = snd_soc_read(codec, WM8580_PAIF3 + codec_dai->id);
aifb &= ~(WM8580_AIF_FMT_MASK | WM8580_AIF_LRP | WM8580_AIF_BCP);
return -EINVAL;
}
- wm8580_write(codec, WM8580_PAIF1 + codec_dai->id, aifa);
- wm8580_write(codec, WM8580_PAIF3 + codec_dai->id, aifb);
+ snd_soc_write(codec, WM8580_PAIF1 + codec_dai->id, aifa);
+ snd_soc_write(codec, WM8580_PAIF3 + codec_dai->id, aifb);
return 0;
}
switch (div_id) {
case WM8580_MCLK:
- reg = wm8580_read(codec, WM8580_PLLB4);
+ reg = snd_soc_read(codec, WM8580_PLLB4);
reg &= ~WM8580_PLLB4_MCLKOUTSRC_MASK;
switch (div) {
default:
return -EINVAL;
}
- wm8580_write(codec, WM8580_PLLB4, reg);
+ snd_soc_write(codec, WM8580_PLLB4, reg);
break;
case WM8580_DAC_CLKSEL:
- reg = wm8580_read(codec, WM8580_CLKSEL);
+ reg = snd_soc_read(codec, WM8580_CLKSEL);
reg &= ~WM8580_CLKSEL_DAC_CLKSEL_MASK;
switch (div) {
default:
return -EINVAL;
}
- wm8580_write(codec, WM8580_CLKSEL, reg);
+ snd_soc_write(codec, WM8580_CLKSEL, reg);
break;
case WM8580_CLKOUTSRC:
- reg = wm8580_read(codec, WM8580_PLLB4);
+ reg = snd_soc_read(codec, WM8580_PLLB4);
reg &= ~WM8580_PLLB4_CLKOUTSRC_MASK;
switch (div) {
default:
return -EINVAL;
}
- wm8580_write(codec, WM8580_PLLB4, reg);
+ snd_soc_write(codec, WM8580_PLLB4, reg);
break;
default:
struct snd_soc_codec *codec = codec_dai->codec;
unsigned int reg;
- reg = wm8580_read(codec, WM8580_DAC_CONTROL5);
+ reg = snd_soc_read(codec, WM8580_DAC_CONTROL5);
if (mute)
reg |= WM8580_DAC_CONTROL5_MUTEALL;
else
reg &= ~WM8580_DAC_CONTROL5_MUTEALL;
- wm8580_write(codec, WM8580_DAC_CONTROL5, reg);
+ snd_soc_write(codec, WM8580_DAC_CONTROL5, reg);
return 0;
}
case SND_SOC_BIAS_STANDBY:
if (codec->bias_level == SND_SOC_BIAS_OFF) {
/* Power up and get individual control of the DACs */
- reg = wm8580_read(codec, WM8580_PWRDN1);
+ reg = snd_soc_read(codec, WM8580_PWRDN1);
reg &= ~(WM8580_PWRDN1_PWDN | WM8580_PWRDN1_ALLDACPD);
- wm8580_write(codec, WM8580_PWRDN1, reg);
+ snd_soc_write(codec, WM8580_PWRDN1, reg);
/* Make VMID high impedence */
- reg = wm8580_read(codec, WM8580_ADC_CONTROL1);
+ reg = snd_soc_read(codec, WM8580_ADC_CONTROL1);
reg &= ~0x100;
- wm8580_write(codec, WM8580_ADC_CONTROL1, reg);
+ snd_soc_write(codec, WM8580_ADC_CONTROL1, reg);
}
break;
case SND_SOC_BIAS_OFF:
- reg = wm8580_read(codec, WM8580_PWRDN1);
- wm8580_write(codec, WM8580_PWRDN1, reg | WM8580_PWRDN1_PWDN);
+ reg = snd_soc_read(codec, WM8580_PWRDN1);
+ snd_soc_write(codec, WM8580_PWRDN1, reg | WM8580_PWRDN1_PWDN);
break;
}
codec->bias_level = level;
};
EXPORT_SYMBOL_GPL(soc_codec_dev_wm8580);
-static int wm8580_register(struct wm8580_priv *wm8580)
+static int wm8580_register(struct wm8580_priv *wm8580,
+ enum snd_soc_control_type control)
{
int ret, i;
struct snd_soc_codec *codec = &wm8580->codec;
codec->private_data = wm8580;
codec->name = "WM8580";
codec->owner = THIS_MODULE;
- codec->read = wm8580_read_reg_cache;
- codec->write = wm8580_write;
codec->bias_level = SND_SOC_BIAS_OFF;
codec->set_bias_level = wm8580_set_bias_level;
codec->dai = wm8580_dai;
memcpy(codec->reg_cache, wm8580_reg, sizeof(wm8580_reg));
+ ret = snd_soc_codec_set_cache_io(codec, 7, 9, control);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+ goto err;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(wm8580->supplies); i++)
+ wm8580->supplies[i].supply = wm8580_supply_names[i];
+
+ ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8580->supplies),
+ wm8580->supplies);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to request supplies: %d\n", ret);
+ goto err;
+ }
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(wm8580->supplies),
+ wm8580->supplies);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to enable supplies: %d\n", ret);
+ goto err_regulator_get;
+ }
+
/* Get the codec into a known state */
- ret = wm8580_write(codec, WM8580_RESET, 0);
+ ret = snd_soc_write(codec, WM8580_RESET, 0);
if (ret != 0) {
dev_err(codec->dev, "Failed to reset codec: %d\n", ret);
- goto err;
+ goto err_regulator_enable;
}
for (i = 0; i < ARRAY_SIZE(wm8580_dai); i++)
ret = snd_soc_register_codec(codec);
if (ret != 0) {
dev_err(codec->dev, "Failed to register codec: %d\n", ret);
- goto err;
+ goto err_regulator_enable;
}
ret = snd_soc_register_dais(wm8580_dai, ARRAY_SIZE(wm8580_dai));
err_codec:
snd_soc_unregister_codec(codec);
+err_regulator_enable:
+ regulator_bulk_disable(ARRAY_SIZE(wm8580->supplies), wm8580->supplies);
+err_regulator_get:
+ regulator_bulk_free(ARRAY_SIZE(wm8580->supplies), wm8580->supplies);
err:
kfree(wm8580);
return ret;
wm8580_set_bias_level(&wm8580->codec, SND_SOC_BIAS_OFF);
snd_soc_unregister_dais(wm8580_dai, ARRAY_SIZE(wm8580_dai));
snd_soc_unregister_codec(&wm8580->codec);
+ regulator_bulk_disable(ARRAY_SIZE(wm8580->supplies), wm8580->supplies);
+ regulator_bulk_free(ARRAY_SIZE(wm8580->supplies), wm8580->supplies);
kfree(wm8580);
wm8580_codec = NULL;
}
return -ENOMEM;
codec = &wm8580->codec;
- codec->hw_write = (hw_write_t)i2c_master_send;
i2c_set_clientdata(i2c, wm8580);
codec->control_data = i2c;
codec->dev = &i2c->dev;
- return wm8580_register(wm8580);
+ return wm8580_register(wm8580, SND_SOC_I2C);
}
static int wm8580_i2c_remove(struct i2c_client *client)
return 0;
}
+#ifdef CONFIG_PM
+static int wm8580_i2c_suspend(struct i2c_client *client, pm_message_t msg)
+{
+ return snd_soc_suspend_device(&client->dev);
+}
+
+static int wm8580_i2c_resume(struct i2c_client *client)
+{
+ return snd_soc_resume_device(&client->dev);
+}
+#else
+#define wm8580_i2c_suspend NULL
+#define wm8580_i2c_resume NULL
+#endif
+
static const struct i2c_device_id wm8580_i2c_id[] = {
{ "wm8580", 0 },
{ }
},
.probe = wm8580_i2c_probe,
.remove = wm8580_i2c_remove,
+ .suspend = wm8580_i2c_suspend,
+ .resume = wm8580_i2c_resume,
.id_table = wm8580_i2c_id,
};
#endif
0x100,
};
-static inline unsigned int wm8728_read_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- u16 *cache = codec->reg_cache;
- BUG_ON(reg >= ARRAY_SIZE(wm8728_reg_defaults));
- return cache[reg];
-}
-
-static inline void wm8728_write_reg_cache(struct snd_soc_codec *codec,
- u16 reg, unsigned int value)
-{
- u16 *cache = codec->reg_cache;
- BUG_ON(reg >= ARRAY_SIZE(wm8728_reg_defaults));
- cache[reg] = value;
-}
-
-/*
- * write to the WM8728 register space
- */
-static int wm8728_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u8 data[2];
-
- /* data is
- * D15..D9 WM8728 register offset
- * D8...D0 register data
- */
- data[0] = (reg << 1) | ((value >> 8) & 0x0001);
- data[1] = value & 0x00ff;
-
- wm8728_write_reg_cache(codec, reg, value);
-
- if (codec->hw_write(codec->control_data, data, 2) == 2)
- return 0;
- else
- return -EIO;
-}
-
static const DECLARE_TLV_DB_SCALE(wm8728_tlv, -12750, 50, 1);
static const struct snd_kcontrol_new wm8728_snd_controls[] = {
static int wm8728_mute(struct snd_soc_dai *dai, int mute)
{
struct snd_soc_codec *codec = dai->codec;
- u16 mute_reg = wm8728_read_reg_cache(codec, WM8728_DACCTL);
+ u16 mute_reg = snd_soc_read(codec, WM8728_DACCTL);
if (mute)
- wm8728_write(codec, WM8728_DACCTL, mute_reg | 1);
+ snd_soc_write(codec, WM8728_DACCTL, mute_reg | 1);
else
- wm8728_write(codec, WM8728_DACCTL, mute_reg & ~1);
+ snd_soc_write(codec, WM8728_DACCTL, mute_reg & ~1);
return 0;
}
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = socdev->card->codec;
- u16 dac = wm8728_read_reg_cache(codec, WM8728_DACCTL);
+ u16 dac = snd_soc_read(codec, WM8728_DACCTL);
dac &= ~0x18;
return -EINVAL;
}
- wm8728_write(codec, WM8728_DACCTL, dac);
+ snd_soc_write(codec, WM8728_DACCTL, dac);
return 0;
}
unsigned int fmt)
{
struct snd_soc_codec *codec = codec_dai->codec;
- u16 iface = wm8728_read_reg_cache(codec, WM8728_IFCTL);
+ u16 iface = snd_soc_read(codec, WM8728_IFCTL);
/* Currently only I2S is supported by the driver, though the
* hardware is more flexible.
return -EINVAL;
}
- wm8728_write(codec, WM8728_IFCTL, iface);
+ snd_soc_write(codec, WM8728_IFCTL, iface);
return 0;
}
case SND_SOC_BIAS_STANDBY:
if (codec->bias_level == SND_SOC_BIAS_OFF) {
/* Power everything up... */
- reg = wm8728_read_reg_cache(codec, WM8728_DACCTL);
- wm8728_write(codec, WM8728_DACCTL, reg & ~0x4);
+ reg = snd_soc_read(codec, WM8728_DACCTL);
+ snd_soc_write(codec, WM8728_DACCTL, reg & ~0x4);
/* ..then sync in the register cache. */
for (i = 0; i < ARRAY_SIZE(wm8728_reg_defaults); i++)
- wm8728_write(codec, i,
- wm8728_read_reg_cache(codec, i));
+ snd_soc_write(codec, i,
+ snd_soc_read(codec, i));
}
break;
case SND_SOC_BIAS_OFF:
- reg = wm8728_read_reg_cache(codec, WM8728_DACCTL);
- wm8728_write(codec, WM8728_DACCTL, reg | 0x4);
+ reg = snd_soc_read(codec, WM8728_DACCTL);
+ snd_soc_write(codec, WM8728_DACCTL, reg | 0x4);
break;
}
codec->bias_level = level;
* initialise the WM8728 driver
* register the mixer and dsp interfaces with the kernel
*/
-static int wm8728_init(struct snd_soc_device *socdev)
+static int wm8728_init(struct snd_soc_device *socdev,
+ enum snd_soc_control_type control)
{
struct snd_soc_codec *codec = socdev->card->codec;
int ret = 0;
codec->name = "WM8728";
codec->owner = THIS_MODULE;
- codec->read = wm8728_read_reg_cache;
- codec->write = wm8728_write;
codec->set_bias_level = wm8728_set_bias_level;
codec->dai = &wm8728_dai;
codec->num_dai = 1;
if (codec->reg_cache == NULL)
return -ENOMEM;
+ ret = snd_soc_codec_set_cache_io(codec, 7, 9, control);
+ if (ret < 0) {
+ printk(KERN_ERR "wm8728: failed to configure cache I/O: %d\n",
+ ret);
+ goto err;
+ }
+
/* register pcms */
ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
if (ret < 0) {
printk(KERN_ERR "wm8728: failed to create pcms\n");
- goto pcm_err;
+ goto err;
}
/* power on device */
card_err:
snd_soc_free_pcms(socdev);
snd_soc_dapm_free(socdev);
-pcm_err:
+err:
kfree(codec->reg_cache);
return ret;
}
i2c_set_clientdata(i2c, codec);
codec->control_data = i2c;
- ret = wm8728_init(socdev);
+ ret = wm8728_init(socdev, SND_SOC_I2C);
if (ret < 0)
pr_err("failed to initialise WM8728\n");
codec->control_data = spi;
- ret = wm8728_init(socdev);
+ ret = wm8728_init(socdev, SND_SOC_SPI);
if (ret < 0)
dev_err(&spi->dev, "failed to initialise WM8728\n");
.probe = wm8728_spi_probe,
.remove = __devexit_p(wm8728_spi_remove),
};
-
-static int wm8728_spi_write(struct spi_device *spi, const char *data, int len)
-{
- struct spi_transfer t;
- struct spi_message m;
- u8 msg[2];
-
- if (len <= 0)
- return 0;
-
- msg[0] = data[0];
- msg[1] = data[1];
-
- spi_message_init(&m);
- memset(&t, 0, (sizeof t));
-
- t.tx_buf = &msg[0];
- t.len = len;
-
- spi_message_add_tail(&t, &m);
- spi_sync(spi, &m);
-
- return len;
-}
#endif /* CONFIG_SPI_MASTER */
static int wm8728_probe(struct platform_device *pdev)
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
if (setup->i2c_address) {
- codec->hw_write = (hw_write_t)i2c_master_send;
ret = wm8728_add_i2c_device(pdev, setup);
}
#endif
#if defined(CONFIG_SPI_MASTER)
if (setup->spi) {
- codec->hw_write = (hw_write_t)wm8728_spi_write;
ret = spi_register_driver(&wm8728_spi_driver);
if (ret != 0)
printk(KERN_ERR "can't add spi driver");
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#include <sound/initval.h>
+#include <sound/tlv.h>
#include "wm8731.h"
unsigned int sysclk;
};
-#ifdef CONFIG_SPI_MASTER
-static int wm8731_spi_write(struct spi_device *spi, const char *data, int len);
-#endif
/*
* wm8731 register cache
* There is no point in caching the reset register
*/
static const u16 wm8731_reg[WM8731_CACHEREGNUM] = {
- 0x0097, 0x0097, 0x0079, 0x0079,
- 0x000a, 0x0008, 0x009f, 0x000a,
- 0x0000, 0x0000
+ 0x0097, 0x0097, 0x0079, 0x0079,
+ 0x000a, 0x0008, 0x009f, 0x000a,
+ 0x0000, 0x0000
};
-/*
- * read wm8731 register cache
- */
-static inline unsigned int wm8731_read_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- u16 *cache = codec->reg_cache;
- if (reg == WM8731_RESET)
- return 0;
- if (reg >= WM8731_CACHEREGNUM)
- return -1;
- return cache[reg];
-}
-
-/*
- * write wm8731 register cache
- */
-static inline void wm8731_write_reg_cache(struct snd_soc_codec *codec,
- u16 reg, unsigned int value)
-{
- u16 *cache = codec->reg_cache;
- if (reg >= WM8731_CACHEREGNUM)
- return;
- cache[reg] = value;
-}
-
-/*
- * write to the WM8731 register space
- */
-static int wm8731_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u8 data[2];
-
- /* data is
- * D15..D9 WM8731 register offset
- * D8...D0 register data
- */
- data[0] = (reg << 1) | ((value >> 8) & 0x0001);
- data[1] = value & 0x00ff;
-
- wm8731_write_reg_cache(codec, reg, value);
- if (codec->hw_write(codec->control_data, data, 2) == 2)
- return 0;
- else
- return -EIO;
-}
-
-#define wm8731_reset(c) wm8731_write(c, WM8731_RESET, 0)
+#define wm8731_reset(c) snd_soc_write(c, WM8731_RESET, 0)
static const char *wm8731_input_select[] = {"Line In", "Mic"};
static const char *wm8731_deemph[] = {"None", "32Khz", "44.1Khz", "48Khz"};
SOC_ENUM_SINGLE(WM8731_APDIGI, 1, 4, wm8731_deemph),
};
+static const DECLARE_TLV_DB_SCALE(in_tlv, -3450, 150, 0);
+static const DECLARE_TLV_DB_SCALE(sidetone_tlv, -1500, 300, 0);
+static const DECLARE_TLV_DB_SCALE(out_tlv, -12100, 100, 1);
+
static const struct snd_kcontrol_new wm8731_snd_controls[] = {
-SOC_DOUBLE_R("Master Playback Volume", WM8731_LOUT1V, WM8731_ROUT1V,
- 0, 127, 0),
+SOC_DOUBLE_R_TLV("Master Playback Volume", WM8731_LOUT1V, WM8731_ROUT1V,
+ 0, 127, 0, out_tlv),
SOC_DOUBLE_R("Master Playback ZC Switch", WM8731_LOUT1V, WM8731_ROUT1V,
7, 1, 0),
-SOC_DOUBLE_R("Capture Volume", WM8731_LINVOL, WM8731_RINVOL, 0, 31, 0),
+SOC_DOUBLE_R_TLV("Capture Volume", WM8731_LINVOL, WM8731_RINVOL, 0, 31, 0,
+ in_tlv),
SOC_DOUBLE_R("Line Capture Switch", WM8731_LINVOL, WM8731_RINVOL, 7, 1, 1),
SOC_SINGLE("Mic Boost (+20dB)", WM8731_APANA, 0, 1, 0),
-SOC_SINGLE("Capture Mic Switch", WM8731_APANA, 1, 1, 1),
+SOC_SINGLE("Mic Capture Switch", WM8731_APANA, 1, 1, 1),
-SOC_SINGLE("Sidetone Playback Volume", WM8731_APANA, 6, 3, 1),
+SOC_SINGLE_TLV("Sidetone Playback Volume", WM8731_APANA, 6, 3, 1,
+ sidetone_tlv),
SOC_SINGLE("ADC High Pass Filter Switch", WM8731_APDIGI, 0, 1, 1),
SOC_SINGLE("Store DC Offset Switch", WM8731_APDIGI, 4, 1, 0),
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = socdev->card->codec;
struct wm8731_priv *wm8731 = codec->private_data;
- u16 iface = wm8731_read_reg_cache(codec, WM8731_IFACE) & 0xfff3;
+ u16 iface = snd_soc_read(codec, WM8731_IFACE) & 0xfff3;
int i = get_coeff(wm8731->sysclk, params_rate(params));
u16 srate = (coeff_div[i].sr << 2) |
(coeff_div[i].bosr << 1) | coeff_div[i].usb;
- wm8731_write(codec, WM8731_SRATE, srate);
+ snd_soc_write(codec, WM8731_SRATE, srate);
/* bit size */
switch (params_format(params)) {
break;
}
- wm8731_write(codec, WM8731_IFACE, iface);
+ snd_soc_write(codec, WM8731_IFACE, iface);
return 0;
}
struct snd_soc_codec *codec = socdev->card->codec;
/* set active */
- wm8731_write(codec, WM8731_ACTIVE, 0x0001);
+ snd_soc_write(codec, WM8731_ACTIVE, 0x0001);
return 0;
}
/* deactivate */
if (!codec->active) {
udelay(50);
- wm8731_write(codec, WM8731_ACTIVE, 0x0);
+ snd_soc_write(codec, WM8731_ACTIVE, 0x0);
}
}
static int wm8731_mute(struct snd_soc_dai *dai, int mute)
{
struct snd_soc_codec *codec = dai->codec;
- u16 mute_reg = wm8731_read_reg_cache(codec, WM8731_APDIGI) & 0xfff7;
+ u16 mute_reg = snd_soc_read(codec, WM8731_APDIGI) & 0xfff7;
if (mute)
- wm8731_write(codec, WM8731_APDIGI, mute_reg | 0x8);
+ snd_soc_write(codec, WM8731_APDIGI, mute_reg | 0x8);
else
- wm8731_write(codec, WM8731_APDIGI, mute_reg);
+ snd_soc_write(codec, WM8731_APDIGI, mute_reg);
return 0;
}
}
/* set iface */
- wm8731_write(codec, WM8731_IFACE, iface);
+ snd_soc_write(codec, WM8731_IFACE, iface);
return 0;
}
break;
case SND_SOC_BIAS_STANDBY:
/* Clear PWROFF, gate CLKOUT, everything else as-is */
- reg = wm8731_read_reg_cache(codec, WM8731_PWR) & 0xff7f;
- wm8731_write(codec, WM8731_PWR, reg | 0x0040);
+ reg = snd_soc_read(codec, WM8731_PWR) & 0xff7f;
+ snd_soc_write(codec, WM8731_PWR, reg | 0x0040);
break;
case SND_SOC_BIAS_OFF:
- wm8731_write(codec, WM8731_ACTIVE, 0x0);
- wm8731_write(codec, WM8731_PWR, 0xffff);
+ snd_soc_write(codec, WM8731_ACTIVE, 0x0);
+ snd_soc_write(codec, WM8731_PWR, 0xffff);
break;
}
codec->bias_level = level;
.rates = WM8731_RATES,
.formats = WM8731_FORMATS,},
.ops = &wm8731_dai_ops,
+ .symmetric_rates = 1,
};
EXPORT_SYMBOL_GPL(wm8731_dai);
+#ifdef CONFIG_PM
static int wm8731_suspend(struct platform_device *pdev, pm_message_t state)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct snd_soc_codec *codec = socdev->card->codec;
- wm8731_write(codec, WM8731_ACTIVE, 0x0);
+ snd_soc_write(codec, WM8731_ACTIVE, 0x0);
wm8731_set_bias_level(codec, SND_SOC_BIAS_OFF);
return 0;
}
wm8731_set_bias_level(codec, codec->suspend_bias_level);
return 0;
}
+#else
+#define wm8731_suspend NULL
+#define wm8731_resume NULL
+#endif
static int wm8731_probe(struct platform_device *pdev)
{
};
EXPORT_SYMBOL_GPL(soc_codec_dev_wm8731);
-static int wm8731_register(struct wm8731_priv *wm8731)
+static int wm8731_register(struct wm8731_priv *wm8731,
+ enum snd_soc_control_type control)
{
int ret;
struct snd_soc_codec *codec = &wm8731->codec;
- u16 reg;
if (wm8731_codec) {
dev_err(codec->dev, "Another WM8731 is registered\n");
- return -EINVAL;
+ ret = -EINVAL;
+ goto err;
}
mutex_init(&codec->mutex);
codec->private_data = wm8731;
codec->name = "WM8731";
codec->owner = THIS_MODULE;
- codec->read = wm8731_read_reg_cache;
- codec->write = wm8731_write;
codec->bias_level = SND_SOC_BIAS_OFF;
codec->set_bias_level = wm8731_set_bias_level;
codec->dai = &wm8731_dai;
memcpy(codec->reg_cache, wm8731_reg, sizeof(wm8731_reg));
+ ret = snd_soc_codec_set_cache_io(codec, 7, 9, control);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+ goto err;
+ }
+
ret = wm8731_reset(codec);
if (ret < 0) {
- dev_err(codec->dev, "Failed to issue reset\n");
- return ret;
+ dev_err(codec->dev, "Failed to issue reset: %d\n", ret);
+ goto err;
}
wm8731_dai.dev = codec->dev;
wm8731_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
/* Latch the update bits */
- reg = wm8731_read_reg_cache(codec, WM8731_LOUT1V);
- wm8731_write(codec, WM8731_LOUT1V, reg & ~0x0100);
- reg = wm8731_read_reg_cache(codec, WM8731_ROUT1V);
- wm8731_write(codec, WM8731_ROUT1V, reg & ~0x0100);
- reg = wm8731_read_reg_cache(codec, WM8731_LINVOL);
- wm8731_write(codec, WM8731_LINVOL, reg & ~0x0100);
- reg = wm8731_read_reg_cache(codec, WM8731_RINVOL);
- wm8731_write(codec, WM8731_RINVOL, reg & ~0x0100);
+ snd_soc_update_bits(codec, WM8731_LOUT1V, 0x100, 0);
+ snd_soc_update_bits(codec, WM8731_ROUT1V, 0x100, 0);
+ snd_soc_update_bits(codec, WM8731_LINVOL, 0x100, 0);
+ snd_soc_update_bits(codec, WM8731_RINVOL, 0x100, 0);
/* Disable bypass path by default */
- reg = wm8731_read_reg_cache(codec, WM8731_APANA);
- wm8731_write(codec, WM8731_APANA, reg & ~0x4);
+ snd_soc_update_bits(codec, WM8731_APANA, 0x4, 0);
wm8731_codec = codec;
ret = snd_soc_register_codec(codec);
if (ret != 0) {
dev_err(codec->dev, "Failed to register codec: %d\n", ret);
- return ret;
+ goto err;
}
ret = snd_soc_register_dai(&wm8731_dai);
if (ret != 0) {
dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
snd_soc_unregister_codec(codec);
- return ret;
+ goto err_codec;
}
return 0;
+
+err_codec:
+ snd_soc_unregister_codec(codec);
+err:
+ kfree(wm8731);
+ return ret;
}
static void wm8731_unregister(struct wm8731_priv *wm8731)
}
#if defined(CONFIG_SPI_MASTER)
-static int wm8731_spi_write(struct spi_device *spi, const char *data, int len)
-{
- struct spi_transfer t;
- struct spi_message m;
- u8 msg[2];
-
- if (len <= 0)
- return 0;
-
- msg[0] = data[0];
- msg[1] = data[1];
-
- spi_message_init(&m);
- memset(&t, 0, (sizeof t));
-
- t.tx_buf = &msg[0];
- t.len = len;
-
- spi_message_add_tail(&t, &m);
- spi_sync(spi, &m);
-
- return len;
-}
-
static int __devinit wm8731_spi_probe(struct spi_device *spi)
{
struct snd_soc_codec *codec;
codec = &wm8731->codec;
codec->control_data = spi;
- codec->hw_write = (hw_write_t)wm8731_spi_write;
codec->dev = &spi->dev;
dev_set_drvdata(&spi->dev, wm8731);
- return wm8731_register(wm8731);
+ return wm8731_register(wm8731, SND_SOC_SPI);
}
static int __devexit wm8731_spi_remove(struct spi_device *spi)
return 0;
}
+#ifdef CONFIG_PM
+static int wm8731_spi_suspend(struct spi_device *spi, pm_message_t msg)
+{
+ return snd_soc_suspend_device(&spi->dev);
+}
+
+static int wm8731_spi_resume(struct spi_device *spi)
+{
+ return snd_soc_resume_device(&spi->dev);
+}
+#else
+#define wm8731_spi_suspend NULL
+#define wm8731_spi_resume NULL
+#endif
+
static struct spi_driver wm8731_spi_driver = {
.driver = {
.name = "wm8731",
.owner = THIS_MODULE,
},
.probe = wm8731_spi_probe,
+ .suspend = wm8731_spi_suspend,
+ .resume = wm8731_spi_resume,
.remove = __devexit_p(wm8731_spi_remove),
};
#endif /* CONFIG_SPI_MASTER */
return -ENOMEM;
codec = &wm8731->codec;
- codec->hw_write = (hw_write_t)i2c_master_send;
i2c_set_clientdata(i2c, wm8731);
codec->control_data = i2c;
codec->dev = &i2c->dev;
- return wm8731_register(wm8731);
+ return wm8731_register(wm8731, SND_SOC_I2C);
}
static __devexit int wm8731_i2c_remove(struct i2c_client *client)
return 0;
}
+#ifdef CONFIG_PM
+static int wm8731_i2c_suspend(struct i2c_client *i2c, pm_message_t msg)
+{
+ return snd_soc_suspend_device(&i2c->dev);
+}
+
+static int wm8731_i2c_resume(struct i2c_client *i2c)
+{
+ return snd_soc_resume_device(&i2c->dev);
+}
+#else
+#define wm8731_i2c_suspend NULL
+#define wm8731_i2c_resume NULL
+#endif
+
static const struct i2c_device_id wm8731_i2c_id[] = {
{ "wm8731", 0 },
{ }
},
.probe = wm8731_i2c_probe,
.remove = __devexit_p(wm8731_i2c_remove),
+ .suspend = wm8731_i2c_suspend,
+ .resume = wm8731_i2c_resume,
.id_table = wm8731_i2c_id,
};
#endif
0x0079, 0x0079, 0x0079, /* 40 */
};
-/*
- * read wm8750 register cache
- */
-static inline unsigned int wm8750_read_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- u16 *cache = codec->reg_cache;
- if (reg > WM8750_CACHE_REGNUM)
- return -1;
- return cache[reg];
-}
-
-/*
- * write wm8750 register cache
- */
-static inline void wm8750_write_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg, unsigned int value)
-{
- u16 *cache = codec->reg_cache;
- if (reg > WM8750_CACHE_REGNUM)
- return;
- cache[reg] = value;
-}
-
-static int wm8750_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u8 data[2];
-
- /* data is
- * D15..D9 WM8753 register offset
- * D8...D0 register data
- */
- data[0] = (reg << 1) | ((value >> 8) & 0x0001);
- data[1] = value & 0x00ff;
-
- wm8750_write_reg_cache(codec, reg, value);
- if (codec->hw_write(codec->control_data, data, 2) == 2)
- return 0;
- else
- return -EIO;
-}
-
-#define wm8750_reset(c) wm8750_write(c, WM8750_RESET, 0)
+#define wm8750_reset(c) snd_soc_write(c, WM8750_RESET, 0)
/*
* WM8750 Controls
return -EINVAL;
}
- wm8750_write(codec, WM8750_IFACE, iface);
+ snd_soc_write(codec, WM8750_IFACE, iface);
return 0;
}
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = socdev->card->codec;
struct wm8750_priv *wm8750 = codec->private_data;
- u16 iface = wm8750_read_reg_cache(codec, WM8750_IFACE) & 0x1f3;
- u16 srate = wm8750_read_reg_cache(codec, WM8750_SRATE) & 0x1c0;
+ u16 iface = snd_soc_read(codec, WM8750_IFACE) & 0x1f3;
+ u16 srate = snd_soc_read(codec, WM8750_SRATE) & 0x1c0;
int coeff = get_coeff(wm8750->sysclk, params_rate(params));
/* bit size */
}
/* set iface & srate */
- wm8750_write(codec, WM8750_IFACE, iface);
+ snd_soc_write(codec, WM8750_IFACE, iface);
if (coeff >= 0)
- wm8750_write(codec, WM8750_SRATE, srate |
+ snd_soc_write(codec, WM8750_SRATE, srate |
(coeff_div[coeff].sr << 1) | coeff_div[coeff].usb);
return 0;
static int wm8750_mute(struct snd_soc_dai *dai, int mute)
{
struct snd_soc_codec *codec = dai->codec;
- u16 mute_reg = wm8750_read_reg_cache(codec, WM8750_ADCDAC) & 0xfff7;
+ u16 mute_reg = snd_soc_read(codec, WM8750_ADCDAC) & 0xfff7;
if (mute)
- wm8750_write(codec, WM8750_ADCDAC, mute_reg | 0x8);
+ snd_soc_write(codec, WM8750_ADCDAC, mute_reg | 0x8);
else
- wm8750_write(codec, WM8750_ADCDAC, mute_reg);
+ snd_soc_write(codec, WM8750_ADCDAC, mute_reg);
return 0;
}
static int wm8750_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
- u16 pwr_reg = wm8750_read_reg_cache(codec, WM8750_PWR1) & 0xfe3e;
+ u16 pwr_reg = snd_soc_read(codec, WM8750_PWR1) & 0xfe3e;
switch (level) {
case SND_SOC_BIAS_ON:
/* set vmid to 50k and unmute dac */
- wm8750_write(codec, WM8750_PWR1, pwr_reg | 0x00c0);
+ snd_soc_write(codec, WM8750_PWR1, pwr_reg | 0x00c0);
break;
case SND_SOC_BIAS_PREPARE:
/* set vmid to 5k for quick power up */
- wm8750_write(codec, WM8750_PWR1, pwr_reg | 0x01c1);
+ snd_soc_write(codec, WM8750_PWR1, pwr_reg | 0x01c1);
break;
case SND_SOC_BIAS_STANDBY:
/* mute dac and set vmid to 500k, enable VREF */
- wm8750_write(codec, WM8750_PWR1, pwr_reg | 0x0141);
+ snd_soc_write(codec, WM8750_PWR1, pwr_reg | 0x0141);
break;
case SND_SOC_BIAS_OFF:
- wm8750_write(codec, WM8750_PWR1, 0x0001);
+ snd_soc_write(codec, WM8750_PWR1, 0x0001);
break;
}
codec->bias_level = level;
* initialise the WM8750 driver
* register the mixer and dsp interfaces with the kernel
*/
-static int wm8750_init(struct snd_soc_device *socdev)
+static int wm8750_init(struct snd_soc_device *socdev,
+ enum snd_soc_control_type control)
{
struct snd_soc_codec *codec = socdev->card->codec;
int reg, ret = 0;
codec->name = "WM8750";
codec->owner = THIS_MODULE;
- codec->read = wm8750_read_reg_cache;
- codec->write = wm8750_write;
codec->set_bias_level = wm8750_set_bias_level;
codec->dai = &wm8750_dai;
codec->num_dai = 1;
if (codec->reg_cache == NULL)
return -ENOMEM;
- wm8750_reset(codec);
+ ret = snd_soc_codec_set_cache_io(codec, 7, 9, control);
+ if (ret < 0) {
+ printk(KERN_ERR "wm8750: failed to set cache I/O: %d\n", ret);
+ goto err;
+ }
+
+ ret = wm8750_reset(codec);
+ if (ret < 0) {
+ printk(KERN_ERR "wm8750: failed to reset: %d\n", ret);
+ goto err;
+ }
/* register pcms */
ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
if (ret < 0) {
printk(KERN_ERR "wm8750: failed to create pcms\n");
- goto pcm_err;
+ goto err;
}
/* charge output caps */
schedule_delayed_work(&codec->delayed_work, msecs_to_jiffies(1000));
/* set the update bits */
- reg = wm8750_read_reg_cache(codec, WM8750_LDAC);
- wm8750_write(codec, WM8750_LDAC, reg | 0x0100);
- reg = wm8750_read_reg_cache(codec, WM8750_RDAC);
- wm8750_write(codec, WM8750_RDAC, reg | 0x0100);
- reg = wm8750_read_reg_cache(codec, WM8750_LOUT1V);
- wm8750_write(codec, WM8750_LOUT1V, reg | 0x0100);
- reg = wm8750_read_reg_cache(codec, WM8750_ROUT1V);
- wm8750_write(codec, WM8750_ROUT1V, reg | 0x0100);
- reg = wm8750_read_reg_cache(codec, WM8750_LOUT2V);
- wm8750_write(codec, WM8750_LOUT2V, reg | 0x0100);
- reg = wm8750_read_reg_cache(codec, WM8750_ROUT2V);
- wm8750_write(codec, WM8750_ROUT2V, reg | 0x0100);
- reg = wm8750_read_reg_cache(codec, WM8750_LINVOL);
- wm8750_write(codec, WM8750_LINVOL, reg | 0x0100);
- reg = wm8750_read_reg_cache(codec, WM8750_RINVOL);
- wm8750_write(codec, WM8750_RINVOL, reg | 0x0100);
+ reg = snd_soc_read(codec, WM8750_LDAC);
+ snd_soc_write(codec, WM8750_LDAC, reg | 0x0100);
+ reg = snd_soc_read(codec, WM8750_RDAC);
+ snd_soc_write(codec, WM8750_RDAC, reg | 0x0100);
+ reg = snd_soc_read(codec, WM8750_LOUT1V);
+ snd_soc_write(codec, WM8750_LOUT1V, reg | 0x0100);
+ reg = snd_soc_read(codec, WM8750_ROUT1V);
+ snd_soc_write(codec, WM8750_ROUT1V, reg | 0x0100);
+ reg = snd_soc_read(codec, WM8750_LOUT2V);
+ snd_soc_write(codec, WM8750_LOUT2V, reg | 0x0100);
+ reg = snd_soc_read(codec, WM8750_ROUT2V);
+ snd_soc_write(codec, WM8750_ROUT2V, reg | 0x0100);
+ reg = snd_soc_read(codec, WM8750_LINVOL);
+ snd_soc_write(codec, WM8750_LINVOL, reg | 0x0100);
+ reg = snd_soc_read(codec, WM8750_RINVOL);
+ snd_soc_write(codec, WM8750_RINVOL, reg | 0x0100);
snd_soc_add_controls(codec, wm8750_snd_controls,
ARRAY_SIZE(wm8750_snd_controls));
card_err:
snd_soc_free_pcms(socdev);
snd_soc_dapm_free(socdev);
-pcm_err:
+err:
kfree(codec->reg_cache);
return ret;
}
i2c_set_clientdata(i2c, codec);
codec->control_data = i2c;
- ret = wm8750_init(socdev);
+ ret = wm8750_init(socdev, SND_SOC_I2C);
if (ret < 0)
pr_err("failed to initialise WM8750\n");
codec->control_data = spi;
- ret = wm8750_init(socdev);
+ ret = wm8750_init(socdev, SND_SOC_SPI);
if (ret < 0)
dev_err(&spi->dev, "failed to initialise WM8750\n");
.probe = wm8750_spi_probe,
.remove = __devexit_p(wm8750_spi_remove),
};
-
-static int wm8750_spi_write(struct spi_device *spi, const char *data, int len)
-{
- struct spi_transfer t;
- struct spi_message m;
- u8 msg[2];
-
- if (len <= 0)
- return 0;
-
- msg[0] = data[0];
- msg[1] = data[1];
-
- spi_message_init(&m);
- memset(&t, 0, (sizeof t));
-
- t.tx_buf = &msg[0];
- t.len = len;
-
- spi_message_add_tail(&t, &m);
- spi_sync(spi, &m);
-
- return len;
-}
#endif
static int wm8750_probe(struct platform_device *pdev)
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
if (setup->i2c_address) {
- codec->hw_write = (hw_write_t)i2c_master_send;
ret = wm8750_add_i2c_device(pdev, setup);
}
#endif
#if defined(CONFIG_SPI_MASTER)
if (setup->spi) {
- codec->hw_write = (hw_write_t)wm8750_spi_write;
ret = spi_register_driver(&wm8750_spi_driver);
if (ret != 0)
printk(KERN_ERR "can't add spi driver");
return 0;
}
+#ifdef CONFIG_PM
+static int wm8753_i2c_suspend(struct i2c_client *client, pm_message_t msg)
+{
+ return snd_soc_suspend_device(&client->dev);
+}
+
+static int wm8753_i2c_resume(struct i2c_client *client)
+{
+ return snd_soc_resume_device(&client->dev);
+}
+#else
+#define wm8753_i2c_suspend NULL
+#define wm8753_i2c_resume NULL
+#endif
+
static const struct i2c_device_id wm8753_i2c_id[] = {
{ "wm8753", 0 },
{ }
},
.probe = wm8753_i2c_probe,
.remove = wm8753_i2c_remove,
+ .suspend = wm8753_i2c_suspend,
+ .resume = wm8753_i2c_resume,
.id_table = wm8753_i2c_id,
};
#endif
return 0;
}
+#ifdef CONFIG_PM
+static int wm8753_spi_suspend(struct spi_device *spi, pm_message_t msg)
+{
+ return snd_soc_suspend_device(&spi->dev);
+}
+
+static int wm8753_spi_resume(struct spi_device *spi)
+{
+ return snd_soc_resume_device(&spi->dev);
+}
+
+#else
+#define wm8753_spi_suspend NULL
+#define wm8753_spi_resume NULL
+#endif
+
static struct spi_driver wm8753_spi_driver = {
.driver = {
.name = "wm8753",
},
.probe = wm8753_spi_probe,
.remove = __devexit_p(wm8753_spi_remove),
+ .suspend = wm8753_spi_suspend,
+ .resume = wm8753_spi_resume,
};
#endif
--- /dev/null
+/*
+ * wm8776.c -- WM8776 ALSA SoC Audio driver
+ *
+ * Copyright 2009 Wolfson Microelectronics plc
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * TODO: Input ALC/limiter support
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include "wm8776.h"
+
+static struct snd_soc_codec *wm8776_codec;
+struct snd_soc_codec_device soc_codec_dev_wm8776;
+
+/* codec private data */
+struct wm8776_priv {
+ struct snd_soc_codec codec;
+ u16 reg_cache[WM8776_CACHEREGNUM];
+ int sysclk[2];
+};
+
+#ifdef CONFIG_SPI_MASTER
+static int wm8776_spi_write(struct spi_device *spi, const char *data, int len);
+#endif
+
+static const u16 wm8776_reg[WM8776_CACHEREGNUM] = {
+ 0x79, 0x79, 0x79, 0xff, 0xff, /* 4 */
+ 0xff, 0x00, 0x90, 0x00, 0x00, /* 9 */
+ 0x22, 0x22, 0x22, 0x08, 0xcf, /* 14 */
+ 0xcf, 0x7b, 0x00, 0x32, 0x00, /* 19 */
+ 0xa6, 0x01, 0x01
+};
+
+static int wm8776_reset(struct snd_soc_codec *codec)
+{
+ return snd_soc_write(codec, WM8776_RESET, 0);
+}
+
+static const DECLARE_TLV_DB_SCALE(hp_tlv, -12100, 100, 1);
+static const DECLARE_TLV_DB_SCALE(dac_tlv, -12750, 50, 1);
+static const DECLARE_TLV_DB_SCALE(adc_tlv, -10350, 50, 1);
+
+static const struct snd_kcontrol_new wm8776_snd_controls[] = {
+SOC_DOUBLE_R_TLV("Headphone Playback Volume", WM8776_HPLVOL, WM8776_HPRVOL,
+ 0, 127, 0, hp_tlv),
+SOC_DOUBLE_R_TLV("Digital Playback Volume", WM8776_DACLVOL, WM8776_DACRVOL,
+ 0, 255, 0, dac_tlv),
+SOC_SINGLE("Digital Playback ZC Switch", WM8776_DACCTRL1, 0, 1, 0),
+
+SOC_SINGLE("Deemphasis Switch", WM8776_DACCTRL2, 0, 1, 0),
+
+SOC_DOUBLE_R_TLV("Capture Volume", WM8776_ADCLVOL, WM8776_ADCRVOL,
+ 0, 255, 0, adc_tlv),
+SOC_DOUBLE("Capture Switch", WM8776_ADCMUX, 7, 6, 1, 1),
+SOC_DOUBLE_R("Capture ZC Switch", WM8776_ADCLVOL, WM8776_ADCRVOL, 8, 1, 0),
+SOC_SINGLE("Capture HPF Switch", WM8776_ADCIFCTRL, 8, 1, 1),
+};
+
+static const struct snd_kcontrol_new inmix_controls[] = {
+SOC_DAPM_SINGLE("AIN1 Switch", WM8776_ADCMUX, 0, 1, 0),
+SOC_DAPM_SINGLE("AIN2 Switch", WM8776_ADCMUX, 1, 1, 0),
+SOC_DAPM_SINGLE("AIN3 Switch", WM8776_ADCMUX, 2, 1, 0),
+SOC_DAPM_SINGLE("AIN4 Switch", WM8776_ADCMUX, 3, 1, 0),
+SOC_DAPM_SINGLE("AIN5 Switch", WM8776_ADCMUX, 4, 1, 0),
+};
+
+static const struct snd_kcontrol_new outmix_controls[] = {
+SOC_DAPM_SINGLE("DAC Switch", WM8776_OUTMUX, 0, 1, 0),
+SOC_DAPM_SINGLE("AUX Switch", WM8776_OUTMUX, 1, 1, 0),
+SOC_DAPM_SINGLE("Bypass Switch", WM8776_OUTMUX, 2, 1, 0),
+};
+
+static const struct snd_soc_dapm_widget wm8776_dapm_widgets[] = {
+SND_SOC_DAPM_INPUT("AUX"),
+SND_SOC_DAPM_INPUT("AUX"),
+
+SND_SOC_DAPM_INPUT("AIN1"),
+SND_SOC_DAPM_INPUT("AIN2"),
+SND_SOC_DAPM_INPUT("AIN3"),
+SND_SOC_DAPM_INPUT("AIN4"),
+SND_SOC_DAPM_INPUT("AIN5"),
+
+SND_SOC_DAPM_MIXER("Input Mixer", WM8776_PWRDOWN, 6, 1,
+ inmix_controls, ARRAY_SIZE(inmix_controls)),
+
+SND_SOC_DAPM_ADC("ADC", "Capture", WM8776_PWRDOWN, 1, 1),
+SND_SOC_DAPM_DAC("DAC", "Playback", WM8776_PWRDOWN, 2, 1),
+
+SND_SOC_DAPM_MIXER("Output Mixer", SND_SOC_NOPM, 0, 0,
+ outmix_controls, ARRAY_SIZE(outmix_controls)),
+
+SND_SOC_DAPM_PGA("Headphone PGA", WM8776_PWRDOWN, 3, 1, NULL, 0),
+
+SND_SOC_DAPM_OUTPUT("VOUT"),
+
+SND_SOC_DAPM_OUTPUT("HPOUTL"),
+SND_SOC_DAPM_OUTPUT("HPOUTR"),
+};
+
+static const struct snd_soc_dapm_route routes[] = {
+ { "Input Mixer", "AIN1 Switch", "AIN1" },
+ { "Input Mixer", "AIN2 Switch", "AIN2" },
+ { "Input Mixer", "AIN3 Switch", "AIN3" },
+ { "Input Mixer", "AIN4 Switch", "AIN4" },
+ { "Input Mixer", "AIN5 Switch", "AIN5" },
+
+ { "ADC", NULL, "Input Mixer" },
+
+ { "Output Mixer", "DAC Switch", "DAC" },
+ { "Output Mixer", "AUX Switch", "AUX" },
+ { "Output Mixer", "Bypass Switch", "Input Mixer" },
+
+ { "VOUT", NULL, "Output Mixer" },
+
+ { "Headphone PGA", NULL, "Output Mixer" },
+
+ { "HPOUTL", NULL, "Headphone PGA" },
+ { "HPOUTR", NULL, "Headphone PGA" },
+};
+
+static int wm8776_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ int reg, iface, master;
+
+ switch (dai->id) {
+ case WM8776_DAI_DAC:
+ reg = WM8776_DACIFCTRL;
+ master = 0x80;
+ break;
+ case WM8776_DAI_ADC:
+ reg = WM8776_ADCIFCTRL;
+ master = 0x100;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ iface = 0;
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBM_CFM:
+ break;
+ case SND_SOC_DAIFMT_CBS_CFS:
+ master = 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ iface |= 0x0002;
+ break;
+ case SND_SOC_DAIFMT_RIGHT_J:
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ iface |= 0x0001;
+ break;
+ /* FIXME: CHECK A/B */
+ case SND_SOC_DAIFMT_DSP_A:
+ iface |= 0x0003;
+ break;
+ case SND_SOC_DAIFMT_DSP_B:
+ iface |= 0x0007;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_IF:
+ iface |= 0x00c;
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ iface |= 0x008;
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ iface |= 0x004;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* Finally, write out the values */
+ snd_soc_update_bits(codec, reg, 0xf, iface);
+ snd_soc_update_bits(codec, WM8776_MSTRCTRL, 0x180, master);
+
+ return 0;
+}
+
+static int mclk_ratios[] = {
+ 128,
+ 192,
+ 256,
+ 384,
+ 512,
+ 768,
+};
+
+static int wm8776_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct wm8776_priv *wm8776 = codec->private_data;
+ int iface_reg, iface;
+ int ratio_shift, master;
+ int i;
+
+ iface = 0;
+
+ switch (dai->id) {
+ case WM8776_DAI_DAC:
+ iface_reg = WM8776_DACIFCTRL;
+ master = 0x80;
+ ratio_shift = 4;
+ break;
+ case WM8776_DAI_ADC:
+ iface_reg = WM8776_ADCIFCTRL;
+ master = 0x100;
+ ratio_shift = 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+
+ /* Set word length */
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ iface |= 0x10;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ iface |= 0x20;
+ break;
+ case SNDRV_PCM_FORMAT_S32_LE:
+ iface |= 0x30;
+ break;
+ }
+
+ /* Only need to set MCLK/LRCLK ratio if we're master */
+ if (snd_soc_read(codec, WM8776_MSTRCTRL) & master) {
+ for (i = 0; i < ARRAY_SIZE(mclk_ratios); i++) {
+ if (wm8776->sysclk[dai->id] / params_rate(params)
+ == mclk_ratios[i])
+ break;
+ }
+
+ if (i == ARRAY_SIZE(mclk_ratios)) {
+ dev_err(codec->dev,
+ "Unable to configure MCLK ratio %d/%d\n",
+ wm8776->sysclk[dai->id], params_rate(params));
+ return -EINVAL;
+ }
+
+ dev_dbg(codec->dev, "MCLK is %dfs\n", mclk_ratios[i]);
+
+ snd_soc_update_bits(codec, WM8776_MSTRCTRL,
+ 0x7 << ratio_shift, i << ratio_shift);
+ } else {
+ dev_dbg(codec->dev, "DAI in slave mode\n");
+ }
+
+ snd_soc_update_bits(codec, iface_reg, 0x30, iface);
+
+ return 0;
+}
+
+static int wm8776_mute(struct snd_soc_dai *dai, int mute)
+{
+ struct snd_soc_codec *codec = dai->codec;
+
+ return snd_soc_write(codec, WM8776_DACMUTE, !!mute);
+}
+
+static int wm8776_set_sysclk(struct snd_soc_dai *dai,
+ int clk_id, unsigned int freq, int dir)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct wm8776_priv *wm8776 = codec->private_data;
+
+ BUG_ON(dai->id >= ARRAY_SIZE(wm8776->sysclk));
+
+ wm8776->sysclk[dai->id] = freq;
+
+ return 0;
+}
+
+static int wm8776_set_bias_level(struct snd_soc_codec *codec,
+ enum snd_soc_bias_level level)
+{
+ switch (level) {
+ case SND_SOC_BIAS_ON:
+ break;
+ case SND_SOC_BIAS_PREPARE:
+ break;
+ case SND_SOC_BIAS_STANDBY:
+ if (codec->bias_level == SND_SOC_BIAS_OFF) {
+ /* Disable the global powerdown; DAPM does the rest */
+ snd_soc_update_bits(codec, WM8776_PWRDOWN, 1, 0);
+ }
+
+ break;
+ case SND_SOC_BIAS_OFF:
+ snd_soc_update_bits(codec, WM8776_PWRDOWN, 1, 1);
+ break;
+ }
+
+ codec->bias_level = level;
+ return 0;
+}
+
+#define WM8776_RATES (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\
+ SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 |\
+ SNDRV_PCM_RATE_96000)
+
+
+#define WM8776_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
+ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
+
+static struct snd_soc_dai_ops wm8776_dac_ops = {
+ .digital_mute = wm8776_mute,
+ .hw_params = wm8776_hw_params,
+ .set_fmt = wm8776_set_fmt,
+ .set_sysclk = wm8776_set_sysclk,
+};
+
+static struct snd_soc_dai_ops wm8776_adc_ops = {
+ .hw_params = wm8776_hw_params,
+ .set_fmt = wm8776_set_fmt,
+ .set_sysclk = wm8776_set_sysclk,
+};
+
+struct snd_soc_dai wm8776_dai[] = {
+ {
+ .name = "WM8776 Playback",
+ .id = WM8776_DAI_DAC,
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = WM8776_RATES,
+ .formats = WM8776_FORMATS,
+ },
+ .ops = &wm8776_dac_ops,
+ },
+ {
+ .name = "WM8776 Capture",
+ .id = WM8776_DAI_ADC,
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = WM8776_RATES,
+ .formats = WM8776_FORMATS,
+ },
+ .ops = &wm8776_adc_ops,
+ },
+};
+EXPORT_SYMBOL_GPL(wm8776_dai);
+
+#ifdef CONFIG_PM
+static int wm8776_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->card->codec;
+
+ wm8776_set_bias_level(codec, SND_SOC_BIAS_OFF);
+
+ return 0;
+}
+
+static int wm8776_resume(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->card->codec;
+ int i;
+ u8 data[2];
+ u16 *cache = codec->reg_cache;
+
+ /* Sync reg_cache with the hardware */
+ for (i = 0; i < ARRAY_SIZE(wm8776_reg); i++) {
+ data[0] = (i << 1) | ((cache[i] >> 8) & 0x0001);
+ data[1] = cache[i] & 0x00ff;
+ codec->hw_write(codec->control_data, data, 2);
+ }
+
+ wm8776_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+ return 0;
+}
+#else
+#define wm8776_suspend NULL
+#define wm8776_resume NULL
+#endif
+
+static int wm8776_probe(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec;
+ int ret = 0;
+
+ if (wm8776_codec == NULL) {
+ dev_err(&pdev->dev, "Codec device not registered\n");
+ return -ENODEV;
+ }
+
+ socdev->card->codec = wm8776_codec;
+ codec = wm8776_codec;
+
+ /* register pcms */
+ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+ if (ret < 0) {
+ dev_err(codec->dev, "failed to create pcms: %d\n", ret);
+ goto pcm_err;
+ }
+
+ snd_soc_add_controls(codec, wm8776_snd_controls,
+ ARRAY_SIZE(wm8776_snd_controls));
+ snd_soc_dapm_new_controls(codec, wm8776_dapm_widgets,
+ ARRAY_SIZE(wm8776_dapm_widgets));
+ snd_soc_dapm_add_routes(codec, routes, ARRAY_SIZE(routes));
+
+ ret = snd_soc_init_card(socdev);
+ if (ret < 0) {
+ dev_err(codec->dev, "failed to register card: %d\n", ret);
+ goto card_err;
+ }
+
+ return ret;
+
+card_err:
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+pcm_err:
+ return ret;
+}
+
+/* power down chip */
+static int wm8776_remove(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+
+ return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_wm8776 = {
+ .probe = wm8776_probe,
+ .remove = wm8776_remove,
+ .suspend = wm8776_suspend,
+ .resume = wm8776_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm8776);
+
+static int wm8776_register(struct wm8776_priv *wm8776,
+ enum snd_soc_control_type control)
+{
+ int ret, i;
+ struct snd_soc_codec *codec = &wm8776->codec;
+
+ if (wm8776_codec) {
+ dev_err(codec->dev, "Another WM8776 is registered\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ mutex_init(&codec->mutex);
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
+
+ codec->private_data = wm8776;
+ codec->name = "WM8776";
+ codec->owner = THIS_MODULE;
+ codec->bias_level = SND_SOC_BIAS_OFF;
+ codec->set_bias_level = wm8776_set_bias_level;
+ codec->dai = wm8776_dai;
+ codec->num_dai = ARRAY_SIZE(wm8776_dai);
+ codec->reg_cache_size = WM8776_CACHEREGNUM;
+ codec->reg_cache = &wm8776->reg_cache;
+
+ memcpy(codec->reg_cache, wm8776_reg, sizeof(wm8776_reg));
+
+ ret = snd_soc_codec_set_cache_io(codec, 7, 9, control);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+ goto err;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(wm8776_dai); i++)
+ wm8776_dai[i].dev = codec->dev;
+
+ ret = wm8776_reset(codec);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to issue reset: %d\n", ret);
+ goto err;
+ }
+
+ wm8776_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+ /* Latch the update bits; right channel only since we always
+ * update both. */
+ snd_soc_update_bits(codec, WM8776_HPRVOL, 0x100, 0x100);
+ snd_soc_update_bits(codec, WM8776_DACRVOL, 0x100, 0x100);
+
+ wm8776_codec = codec;
+
+ ret = snd_soc_register_codec(codec);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+ goto err;
+ }
+
+ ret = snd_soc_register_dais(wm8776_dai, ARRAY_SIZE(wm8776_dai));
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to register DAIs: %d\n", ret);
+ goto err_codec;
+ }
+
+ return 0;
+
+err_codec:
+ snd_soc_unregister_codec(codec);
+err:
+ kfree(wm8776);
+ return ret;
+}
+
+static void wm8776_unregister(struct wm8776_priv *wm8776)
+{
+ wm8776_set_bias_level(&wm8776->codec, SND_SOC_BIAS_OFF);
+ snd_soc_unregister_dais(wm8776_dai, ARRAY_SIZE(wm8776_dai));
+ snd_soc_unregister_codec(&wm8776->codec);
+ kfree(wm8776);
+ wm8776_codec = NULL;
+}
+
+#if defined(CONFIG_SPI_MASTER)
+static int wm8776_spi_write(struct spi_device *spi, const char *data, int len)
+{
+ struct spi_transfer t;
+ struct spi_message m;
+ u8 msg[2];
+
+ if (len <= 0)
+ return 0;
+
+ msg[0] = data[0];
+ msg[1] = data[1];
+
+ spi_message_init(&m);
+ memset(&t, 0, (sizeof t));
+
+ t.tx_buf = &msg[0];
+ t.len = len;
+
+ spi_message_add_tail(&t, &m);
+ spi_sync(spi, &m);
+
+ return len;
+}
+
+static int __devinit wm8776_spi_probe(struct spi_device *spi)
+{
+ struct snd_soc_codec *codec;
+ struct wm8776_priv *wm8776;
+
+ wm8776 = kzalloc(sizeof(struct wm8776_priv), GFP_KERNEL);
+ if (wm8776 == NULL)
+ return -ENOMEM;
+
+ codec = &wm8776->codec;
+ codec->control_data = spi;
+ codec->hw_write = (hw_write_t)wm8776_spi_write;
+ codec->dev = &spi->dev;
+
+ dev_set_drvdata(&spi->dev, wm8776);
+
+ return wm8776_register(wm8776, SND_SOC_SPI);
+}
+
+static int __devexit wm8776_spi_remove(struct spi_device *spi)
+{
+ struct wm8776_priv *wm8776 = dev_get_drvdata(&spi->dev);
+
+ wm8776_unregister(wm8776);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int wm8776_spi_suspend(struct spi_device *spi, pm_message_t msg)
+{
+ return snd_soc_suspend_device(&spi->dev);
+}
+
+static int wm8776_spi_resume(struct spi_device *spi)
+{
+ return snd_soc_resume_device(&spi->dev);
+}
+#else
+#define wm8776_spi_suspend NULL
+#define wm8776_spi_resume NULL
+#endif
+
+static struct spi_driver wm8776_spi_driver = {
+ .driver = {
+ .name = "wm8776",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = wm8776_spi_probe,
+ .suspend = wm8776_spi_suspend,
+ .resume = wm8776_spi_resume,
+ .remove = __devexit_p(wm8776_spi_remove),
+};
+#endif /* CONFIG_SPI_MASTER */
+
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+static __devinit int wm8776_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct wm8776_priv *wm8776;
+ struct snd_soc_codec *codec;
+
+ wm8776 = kzalloc(sizeof(struct wm8776_priv), GFP_KERNEL);
+ if (wm8776 == NULL)
+ return -ENOMEM;
+
+ codec = &wm8776->codec;
+ codec->hw_write = (hw_write_t)i2c_master_send;
+
+ i2c_set_clientdata(i2c, wm8776);
+ codec->control_data = i2c;
+
+ codec->dev = &i2c->dev;
+
+ return wm8776_register(wm8776, SND_SOC_I2C);
+}
+
+static __devexit int wm8776_i2c_remove(struct i2c_client *client)
+{
+ struct wm8776_priv *wm8776 = i2c_get_clientdata(client);
+ wm8776_unregister(wm8776);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int wm8776_i2c_suspend(struct i2c_client *i2c, pm_message_t msg)
+{
+ return snd_soc_suspend_device(&i2c->dev);
+}
+
+static int wm8776_i2c_resume(struct i2c_client *i2c)
+{
+ return snd_soc_resume_device(&i2c->dev);
+}
+#else
+#define wm8776_i2c_suspend NULL
+#define wm8776_i2c_resume NULL
+#endif
+
+static const struct i2c_device_id wm8776_i2c_id[] = {
+ { "wm8776", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, wm8776_i2c_id);
+
+static struct i2c_driver wm8776_i2c_driver = {
+ .driver = {
+ .name = "wm8776",
+ .owner = THIS_MODULE,
+ },
+ .probe = wm8776_i2c_probe,
+ .remove = __devexit_p(wm8776_i2c_remove),
+ .suspend = wm8776_i2c_suspend,
+ .resume = wm8776_i2c_resume,
+ .id_table = wm8776_i2c_id,
+};
+#endif
+
+static int __init wm8776_modinit(void)
+{
+ int ret;
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+ ret = i2c_add_driver(&wm8776_i2c_driver);
+ if (ret != 0) {
+ printk(KERN_ERR "Failed to register WM8776 I2C driver: %d\n",
+ ret);
+ }
+#endif
+#if defined(CONFIG_SPI_MASTER)
+ ret = spi_register_driver(&wm8776_spi_driver);
+ if (ret != 0) {
+ printk(KERN_ERR "Failed to register WM8776 SPI driver: %d\n",
+ ret);
+ }
+#endif
+ return 0;
+}
+module_init(wm8776_modinit);
+
+static void __exit wm8776_exit(void)
+{
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+ i2c_del_driver(&wm8776_i2c_driver);
+#endif
+#if defined(CONFIG_SPI_MASTER)
+ spi_unregister_driver(&wm8776_spi_driver);
+#endif
+}
+module_exit(wm8776_exit);
+
+MODULE_DESCRIPTION("ASoC WM8776 driver");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * wm8776.h -- WM8776 ASoC driver
+ *
+ * Copyright 2009 Wolfson Microelectronics plc
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _WM8776_H
+#define _WM8776_H
+
+/* Registers */
+
+#define WM8776_HPLVOL 0x00
+#define WM8776_HPRVOL 0x01
+#define WM8776_HPMASTER 0x02
+#define WM8776_DACLVOL 0x03
+#define WM8776_DACRVOL 0x04
+#define WM8776_DACMASTER 0x05
+#define WM8776_PHASESWAP 0x06
+#define WM8776_DACCTRL1 0x07
+#define WM8776_DACMUTE 0x08
+#define WM8776_DACCTRL2 0x09
+#define WM8776_DACIFCTRL 0x0a
+#define WM8776_ADCIFCTRL 0x0b
+#define WM8776_MSTRCTRL 0x0c
+#define WM8776_PWRDOWN 0x0d
+#define WM8776_ADCLVOL 0x0e
+#define WM8776_ADCRVOL 0x0f
+#define WM8776_ALCCTRL1 0x10
+#define WM8776_ALCCTRL2 0x11
+#define WM8776_ALCCTRL3 0x12
+#define WM8776_NOISEGATE 0x13
+#define WM8776_LIMITER 0x14
+#define WM8776_ADCMUX 0x15
+#define WM8776_OUTMUX 0x16
+#define WM8776_RESET 0x17
+
+#define WM8776_CACHEREGNUM 0x17
+
+#define WM8776_DAI_DAC 0
+#define WM8776_DAI_ADC 1
+
+extern struct snd_soc_dai wm8776_dai[];
+extern struct snd_soc_codec_device soc_codec_dev_wm8776;
+
+#endif
#define WM8900_REG_CLOCKING2_DAC_CLKDIV 0x1c
#define WM8900_REG_DACCTRL_MUTE 0x004
+#define WM8900_REG_DACCTRL_DAC_SB_FILT 0x100
#define WM8900_REG_DACCTRL_AIF_LRCLKRATE 0x400
#define WM8900_REG_AUDIO3_ADCLRC_DIR 0x0800
/* Remaining registers all zero */
};
-/*
- * read wm8900 register cache
- */
-static inline unsigned int wm8900_read_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- u16 *cache = codec->reg_cache;
-
- BUG_ON(reg >= WM8900_MAXREG);
-
- if (reg == WM8900_REG_ID)
- return 0;
-
- return cache[reg];
-}
-
-/*
- * write wm8900 register cache
- */
-static inline void wm8900_write_reg_cache(struct snd_soc_codec *codec,
- u16 reg, unsigned int value)
-{
- u16 *cache = codec->reg_cache;
-
- BUG_ON(reg >= WM8900_MAXREG);
-
- cache[reg] = value;
-}
-
-/*
- * write to the WM8900 register space
- */
-static int wm8900_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u8 data[3];
-
- if (value == wm8900_read_reg_cache(codec, reg))
- return 0;
-
- /* data is
- * D15..D9 WM8900 register offset
- * D8...D0 register data
- */
- data[0] = reg;
- data[1] = value >> 8;
- data[2] = value & 0x00ff;
-
- wm8900_write_reg_cache(codec, reg, value);
- if (codec->hw_write(codec->control_data, data, 3) == 3)
- return 0;
- else
- return -EIO;
-}
-
-/*
- * Read from the wm8900.
- */
-static unsigned int wm8900_chip_read(struct snd_soc_codec *codec, u8 reg)
-{
- struct i2c_msg xfer[2];
- u16 data;
- int ret;
- struct i2c_client *client = codec->control_data;
-
- BUG_ON(reg != WM8900_REG_ID && reg != WM8900_REG_POWER1);
-
- /* Write register */
- xfer[0].addr = client->addr;
- xfer[0].flags = 0;
- xfer[0].len = 1;
- xfer[0].buf = ®
-
- /* Read data */
- xfer[1].addr = client->addr;
- xfer[1].flags = I2C_M_RD;
- xfer[1].len = 2;
- xfer[1].buf = (u8 *)&data;
-
- ret = i2c_transfer(client->adapter, xfer, 2);
- if (ret != 2) {
- printk(KERN_CRIT "i2c_transfer returned %d\n", ret);
- return 0;
- }
-
- return (data >> 8) | ((data & 0xff) << 8);
-}
-
-/*
- * Read from the WM8900 register space. Most registers can't be read
- * and are therefore supplied from cache.
- */
-static unsigned int wm8900_read(struct snd_soc_codec *codec, unsigned int reg)
+static int wm8900_volatile_register(unsigned int reg)
{
switch (reg) {
case WM8900_REG_ID:
- return wm8900_chip_read(codec, reg);
+ case WM8900_REG_POWER1:
+ return 1;
default:
- return wm8900_read_reg_cache(codec, reg);
+ return 0;
}
}
static void wm8900_reset(struct snd_soc_codec *codec)
{
- wm8900_write(codec, WM8900_REG_RESET, 0);
+ snd_soc_write(codec, WM8900_REG_RESET, 0);
memcpy(codec->reg_cache, wm8900_reg_defaults,
sizeof(codec->reg_cache));
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_codec *codec = w->codec;
- u16 hpctl1 = wm8900_read(codec, WM8900_REG_HPCTL1);
+ u16 hpctl1 = snd_soc_read(codec, WM8900_REG_HPCTL1);
switch (event) {
case SND_SOC_DAPM_PRE_PMU:
/* Clamp headphone outputs */
hpctl1 = WM8900_REG_HPCTL1_HP_CLAMP_IP |
WM8900_REG_HPCTL1_HP_CLAMP_OP;
- wm8900_write(codec, WM8900_REG_HPCTL1, hpctl1);
+ snd_soc_write(codec, WM8900_REG_HPCTL1, hpctl1);
break;
case SND_SOC_DAPM_POST_PMU:
hpctl1 |= WM8900_REG_HPCTL1_HP_SHORT |
WM8900_REG_HPCTL1_HP_SHORT2 |
WM8900_REG_HPCTL1_HP_IPSTAGE_ENA;
- wm8900_write(codec, WM8900_REG_HPCTL1, hpctl1);
+ snd_soc_write(codec, WM8900_REG_HPCTL1, hpctl1);
msleep(400);
/* Enable the output stage */
hpctl1 &= ~WM8900_REG_HPCTL1_HP_CLAMP_OP;
hpctl1 |= WM8900_REG_HPCTL1_HP_OPSTAGE_ENA;
- wm8900_write(codec, WM8900_REG_HPCTL1, hpctl1);
+ snd_soc_write(codec, WM8900_REG_HPCTL1, hpctl1);
/* Remove the shorts */
hpctl1 &= ~WM8900_REG_HPCTL1_HP_SHORT2;
- wm8900_write(codec, WM8900_REG_HPCTL1, hpctl1);
+ snd_soc_write(codec, WM8900_REG_HPCTL1, hpctl1);
hpctl1 &= ~WM8900_REG_HPCTL1_HP_SHORT;
- wm8900_write(codec, WM8900_REG_HPCTL1, hpctl1);
+ snd_soc_write(codec, WM8900_REG_HPCTL1, hpctl1);
break;
case SND_SOC_DAPM_PRE_PMD:
/* Short the output */
hpctl1 |= WM8900_REG_HPCTL1_HP_SHORT;
- wm8900_write(codec, WM8900_REG_HPCTL1, hpctl1);
+ snd_soc_write(codec, WM8900_REG_HPCTL1, hpctl1);
/* Disable the output stage */
hpctl1 &= ~WM8900_REG_HPCTL1_HP_OPSTAGE_ENA;
- wm8900_write(codec, WM8900_REG_HPCTL1, hpctl1);
+ snd_soc_write(codec, WM8900_REG_HPCTL1, hpctl1);
/* Clamp the outputs and power down input */
hpctl1 |= WM8900_REG_HPCTL1_HP_CLAMP_IP |
WM8900_REG_HPCTL1_HP_CLAMP_OP;
hpctl1 &= ~WM8900_REG_HPCTL1_HP_IPSTAGE_ENA;
- wm8900_write(codec, WM8900_REG_HPCTL1, hpctl1);
+ snd_soc_write(codec, WM8900_REG_HPCTL1, hpctl1);
break;
case SND_SOC_DAPM_POST_PMD:
/* Disable everything */
- wm8900_write(codec, WM8900_REG_HPCTL1, 0);
+ snd_soc_write(codec, WM8900_REG_HPCTL1, 0);
break;
default:
SOC_ENUM("DAC Mute Rate", dac_mute_rate),
SOC_SINGLE("DAC Mono Switch", WM8900_REG_DACCTRL, 9, 1, 0),
SOC_ENUM("DAC Deemphasis", dac_deemphasis),
-SOC_SINGLE("DAC Sloping Stopband Filter Switch", WM8900_REG_DACCTRL, 8, 1, 0),
SOC_SINGLE("DAC Sigma-Delta Modulator Clock Switch", WM8900_REG_DACCTRL,
12, 1, 0),
struct snd_soc_codec *codec = socdev->card->codec;
u16 reg;
- reg = wm8900_read(codec, WM8900_REG_AUDIO1) & ~0x60;
+ reg = snd_soc_read(codec, WM8900_REG_AUDIO1) & ~0x60;
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
return -EINVAL;
}
- wm8900_write(codec, WM8900_REG_AUDIO1, reg);
+ snd_soc_write(codec, WM8900_REG_AUDIO1, reg);
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ reg = snd_soc_read(codec, WM8900_REG_DACCTRL);
+
+ if (params_rate(params) <= 24000)
+ reg |= WM8900_REG_DACCTRL_DAC_SB_FILT;
+ else
+ reg &= ~WM8900_REG_DACCTRL_DAC_SB_FILT;
+
+ snd_soc_write(codec, WM8900_REG_DACCTRL, reg);
+ }
return 0;
}
return 0;
/* The digital side should be disabled during any change. */
- reg = wm8900_read(codec, WM8900_REG_POWER1);
- wm8900_write(codec, WM8900_REG_POWER1,
+ reg = snd_soc_read(codec, WM8900_REG_POWER1);
+ snd_soc_write(codec, WM8900_REG_POWER1,
reg & (~WM8900_REG_POWER1_FLL_ENA));
/* Disable the FLL? */
if (!freq_in || !freq_out) {
- reg = wm8900_read(codec, WM8900_REG_CLOCKING1);
- wm8900_write(codec, WM8900_REG_CLOCKING1,
+ reg = snd_soc_read(codec, WM8900_REG_CLOCKING1);
+ snd_soc_write(codec, WM8900_REG_CLOCKING1,
reg & (~WM8900_REG_CLOCKING1_MCLK_SRC));
- reg = wm8900_read(codec, WM8900_REG_FLLCTL1);
- wm8900_write(codec, WM8900_REG_FLLCTL1,
+ reg = snd_soc_read(codec, WM8900_REG_FLLCTL1);
+ snd_soc_write(codec, WM8900_REG_FLLCTL1,
reg & (~WM8900_REG_FLLCTL1_OSC_ENA));
wm8900->fll_in = freq_in;
/* The osclilator *MUST* be enabled before we enable the
* digital circuit. */
- wm8900_write(codec, WM8900_REG_FLLCTL1,
+ snd_soc_write(codec, WM8900_REG_FLLCTL1,
fll_div.fll_ratio | WM8900_REG_FLLCTL1_OSC_ENA);
- wm8900_write(codec, WM8900_REG_FLLCTL4, fll_div.n >> 5);
- wm8900_write(codec, WM8900_REG_FLLCTL5,
+ snd_soc_write(codec, WM8900_REG_FLLCTL4, fll_div.n >> 5);
+ snd_soc_write(codec, WM8900_REG_FLLCTL5,
(fll_div.fllclk_div << 6) | (fll_div.n & 0x1f));
if (fll_div.k) {
- wm8900_write(codec, WM8900_REG_FLLCTL2,
+ snd_soc_write(codec, WM8900_REG_FLLCTL2,
(fll_div.k >> 8) | 0x100);
- wm8900_write(codec, WM8900_REG_FLLCTL3, fll_div.k & 0xff);
+ snd_soc_write(codec, WM8900_REG_FLLCTL3, fll_div.k & 0xff);
} else
- wm8900_write(codec, WM8900_REG_FLLCTL2, 0);
+ snd_soc_write(codec, WM8900_REG_FLLCTL2, 0);
if (fll_div.fll_slow_lock_ref)
- wm8900_write(codec, WM8900_REG_FLLCTL6,
+ snd_soc_write(codec, WM8900_REG_FLLCTL6,
WM8900_REG_FLLCTL6_FLL_SLOW_LOCK_REF);
else
- wm8900_write(codec, WM8900_REG_FLLCTL6, 0);
+ snd_soc_write(codec, WM8900_REG_FLLCTL6, 0);
- reg = wm8900_read(codec, WM8900_REG_POWER1);
- wm8900_write(codec, WM8900_REG_POWER1,
+ reg = snd_soc_read(codec, WM8900_REG_POWER1);
+ snd_soc_write(codec, WM8900_REG_POWER1,
reg | WM8900_REG_POWER1_FLL_ENA);
reenable:
- reg = wm8900_read(codec, WM8900_REG_CLOCKING1);
- wm8900_write(codec, WM8900_REG_CLOCKING1,
+ reg = snd_soc_read(codec, WM8900_REG_CLOCKING1);
+ snd_soc_write(codec, WM8900_REG_CLOCKING1,
reg | WM8900_REG_CLOCKING1_MCLK_SRC);
return 0;
switch (div_id) {
case WM8900_BCLK_DIV:
- reg = wm8900_read(codec, WM8900_REG_CLOCKING1);
- wm8900_write(codec, WM8900_REG_CLOCKING1,
+ reg = snd_soc_read(codec, WM8900_REG_CLOCKING1);
+ snd_soc_write(codec, WM8900_REG_CLOCKING1,
div | (reg & WM8900_REG_CLOCKING1_BCLK_MASK));
break;
case WM8900_OPCLK_DIV:
- reg = wm8900_read(codec, WM8900_REG_CLOCKING1);
- wm8900_write(codec, WM8900_REG_CLOCKING1,
+ reg = snd_soc_read(codec, WM8900_REG_CLOCKING1);
+ snd_soc_write(codec, WM8900_REG_CLOCKING1,
div | (reg & WM8900_REG_CLOCKING1_OPCLK_MASK));
break;
case WM8900_DAC_LRCLK:
- reg = wm8900_read(codec, WM8900_REG_AUDIO4);
- wm8900_write(codec, WM8900_REG_AUDIO4,
+ reg = snd_soc_read(codec, WM8900_REG_AUDIO4);
+ snd_soc_write(codec, WM8900_REG_AUDIO4,
div | (reg & WM8900_LRC_MASK));
break;
case WM8900_ADC_LRCLK:
- reg = wm8900_read(codec, WM8900_REG_AUDIO3);
- wm8900_write(codec, WM8900_REG_AUDIO3,
+ reg = snd_soc_read(codec, WM8900_REG_AUDIO3);
+ snd_soc_write(codec, WM8900_REG_AUDIO3,
div | (reg & WM8900_LRC_MASK));
break;
case WM8900_DAC_CLKDIV:
- reg = wm8900_read(codec, WM8900_REG_CLOCKING2);
- wm8900_write(codec, WM8900_REG_CLOCKING2,
+ reg = snd_soc_read(codec, WM8900_REG_CLOCKING2);
+ snd_soc_write(codec, WM8900_REG_CLOCKING2,
div | (reg & WM8900_REG_CLOCKING2_DAC_CLKDIV));
break;
case WM8900_ADC_CLKDIV:
- reg = wm8900_read(codec, WM8900_REG_CLOCKING2);
- wm8900_write(codec, WM8900_REG_CLOCKING2,
+ reg = snd_soc_read(codec, WM8900_REG_CLOCKING2);
+ snd_soc_write(codec, WM8900_REG_CLOCKING2,
div | (reg & WM8900_REG_CLOCKING2_ADC_CLKDIV));
break;
case WM8900_LRCLK_MODE:
- reg = wm8900_read(codec, WM8900_REG_DACCTRL);
- wm8900_write(codec, WM8900_REG_DACCTRL,
+ reg = snd_soc_read(codec, WM8900_REG_DACCTRL);
+ snd_soc_write(codec, WM8900_REG_DACCTRL,
div | (reg & WM8900_REG_DACCTRL_AIF_LRCLKRATE));
break;
default:
struct snd_soc_codec *codec = codec_dai->codec;
unsigned int clocking1, aif1, aif3, aif4;
- clocking1 = wm8900_read(codec, WM8900_REG_CLOCKING1);
- aif1 = wm8900_read(codec, WM8900_REG_AUDIO1);
- aif3 = wm8900_read(codec, WM8900_REG_AUDIO3);
- aif4 = wm8900_read(codec, WM8900_REG_AUDIO4);
+ clocking1 = snd_soc_read(codec, WM8900_REG_CLOCKING1);
+ aif1 = snd_soc_read(codec, WM8900_REG_AUDIO1);
+ aif3 = snd_soc_read(codec, WM8900_REG_AUDIO3);
+ aif4 = snd_soc_read(codec, WM8900_REG_AUDIO4);
/* set master/slave audio interface */
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
return -EINVAL;
}
- wm8900_write(codec, WM8900_REG_CLOCKING1, clocking1);
- wm8900_write(codec, WM8900_REG_AUDIO1, aif1);
- wm8900_write(codec, WM8900_REG_AUDIO3, aif3);
- wm8900_write(codec, WM8900_REG_AUDIO4, aif4);
+ snd_soc_write(codec, WM8900_REG_CLOCKING1, clocking1);
+ snd_soc_write(codec, WM8900_REG_AUDIO1, aif1);
+ snd_soc_write(codec, WM8900_REG_AUDIO3, aif3);
+ snd_soc_write(codec, WM8900_REG_AUDIO4, aif4);
return 0;
}
struct snd_soc_codec *codec = codec_dai->codec;
u16 reg;
- reg = wm8900_read(codec, WM8900_REG_DACCTRL);
+ reg = snd_soc_read(codec, WM8900_REG_DACCTRL);
if (mute)
reg |= WM8900_REG_DACCTRL_MUTE;
else
reg &= ~WM8900_REG_DACCTRL_MUTE;
- wm8900_write(codec, WM8900_REG_DACCTRL, reg);
+ snd_soc_write(codec, WM8900_REG_DACCTRL, reg);
return 0;
}
switch (level) {
case SND_SOC_BIAS_ON:
/* Enable thermal shutdown */
- reg = wm8900_read(codec, WM8900_REG_GPIO);
- wm8900_write(codec, WM8900_REG_GPIO,
+ reg = snd_soc_read(codec, WM8900_REG_GPIO);
+ snd_soc_write(codec, WM8900_REG_GPIO,
reg | WM8900_REG_GPIO_TEMP_ENA);
- reg = wm8900_read(codec, WM8900_REG_ADDCTL);
- wm8900_write(codec, WM8900_REG_ADDCTL,
+ reg = snd_soc_read(codec, WM8900_REG_ADDCTL);
+ snd_soc_write(codec, WM8900_REG_ADDCTL,
reg | WM8900_REG_ADDCTL_TEMP_SD);
break;
/* Charge capacitors if initial power up */
if (codec->bias_level == SND_SOC_BIAS_OFF) {
/* STARTUP_BIAS_ENA on */
- wm8900_write(codec, WM8900_REG_POWER1,
+ snd_soc_write(codec, WM8900_REG_POWER1,
WM8900_REG_POWER1_STARTUP_BIAS_ENA);
/* Startup bias mode */
- wm8900_write(codec, WM8900_REG_ADDCTL,
+ snd_soc_write(codec, WM8900_REG_ADDCTL,
WM8900_REG_ADDCTL_BIAS_SRC |
WM8900_REG_ADDCTL_VMID_SOFTST);
/* VMID 2x50k */
- wm8900_write(codec, WM8900_REG_POWER1,
+ snd_soc_write(codec, WM8900_REG_POWER1,
WM8900_REG_POWER1_STARTUP_BIAS_ENA | 0x1);
/* Allow capacitors to charge */
schedule_timeout_interruptible(msecs_to_jiffies(400));
/* Enable bias */
- wm8900_write(codec, WM8900_REG_POWER1,
+ snd_soc_write(codec, WM8900_REG_POWER1,
WM8900_REG_POWER1_STARTUP_BIAS_ENA |
WM8900_REG_POWER1_BIAS_ENA | 0x1);
- wm8900_write(codec, WM8900_REG_ADDCTL, 0);
+ snd_soc_write(codec, WM8900_REG_ADDCTL, 0);
- wm8900_write(codec, WM8900_REG_POWER1,
+ snd_soc_write(codec, WM8900_REG_POWER1,
WM8900_REG_POWER1_BIAS_ENA | 0x1);
}
- reg = wm8900_read(codec, WM8900_REG_POWER1);
- wm8900_write(codec, WM8900_REG_POWER1,
+ reg = snd_soc_read(codec, WM8900_REG_POWER1);
+ snd_soc_write(codec, WM8900_REG_POWER1,
(reg & WM8900_REG_POWER1_FLL_ENA) |
WM8900_REG_POWER1_BIAS_ENA | 0x1);
- wm8900_write(codec, WM8900_REG_POWER2,
+ snd_soc_write(codec, WM8900_REG_POWER2,
WM8900_REG_POWER2_SYSCLK_ENA);
- wm8900_write(codec, WM8900_REG_POWER3, 0);
+ snd_soc_write(codec, WM8900_REG_POWER3, 0);
break;
case SND_SOC_BIAS_OFF:
/* Startup bias enable */
- reg = wm8900_read(codec, WM8900_REG_POWER1);
- wm8900_write(codec, WM8900_REG_POWER1,
+ reg = snd_soc_read(codec, WM8900_REG_POWER1);
+ snd_soc_write(codec, WM8900_REG_POWER1,
reg & WM8900_REG_POWER1_STARTUP_BIAS_ENA);
- wm8900_write(codec, WM8900_REG_ADDCTL,
+ snd_soc_write(codec, WM8900_REG_ADDCTL,
WM8900_REG_ADDCTL_BIAS_SRC |
WM8900_REG_ADDCTL_VMID_SOFTST);
/* Discharge caps */
- wm8900_write(codec, WM8900_REG_POWER1,
+ snd_soc_write(codec, WM8900_REG_POWER1,
WM8900_REG_POWER1_STARTUP_BIAS_ENA);
schedule_timeout_interruptible(msecs_to_jiffies(500));
/* Remove clamp */
- wm8900_write(codec, WM8900_REG_HPCTL1, 0);
+ snd_soc_write(codec, WM8900_REG_HPCTL1, 0);
/* Power down */
- wm8900_write(codec, WM8900_REG_ADDCTL, 0);
- wm8900_write(codec, WM8900_REG_POWER1, 0);
- wm8900_write(codec, WM8900_REG_POWER2, 0);
- wm8900_write(codec, WM8900_REG_POWER3, 0);
+ snd_soc_write(codec, WM8900_REG_ADDCTL, 0);
+ snd_soc_write(codec, WM8900_REG_POWER1, 0);
+ snd_soc_write(codec, WM8900_REG_POWER2, 0);
+ snd_soc_write(codec, WM8900_REG_POWER3, 0);
/* Need to let things settle before stopping the clock
* to ensure that restart works, see "Stopping the
* master clock" in the datasheet. */
schedule_timeout_interruptible(msecs_to_jiffies(1));
- wm8900_write(codec, WM8900_REG_POWER2,
+ snd_soc_write(codec, WM8900_REG_POWER2,
WM8900_REG_POWER2_SYSCLK_ENA);
break;
}
if (cache) {
for (i = 0; i < WM8900_MAXREG; i++)
- wm8900_write(codec, i, cache[i]);
+ snd_soc_write(codec, i, cache[i]);
kfree(cache);
} else
dev_err(&pdev->dev, "Unable to allocate register cache\n");
codec->name = "WM8900";
codec->owner = THIS_MODULE;
- codec->read = wm8900_read;
- codec->write = wm8900_write;
codec->dai = &wm8900_dai;
codec->num_dai = 1;
- codec->hw_write = (hw_write_t)i2c_master_send;
codec->control_data = i2c;
codec->set_bias_level = wm8900_set_bias_level;
+ codec->volatile_register = wm8900_volatile_register;
codec->dev = &i2c->dev;
- reg = wm8900_read(codec, WM8900_REG_ID);
+ ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_I2C);
+ if (ret != 0) {
+ dev_err(&i2c->dev, "Failed to set cache I/O: %d\n", ret);
+ goto err;
+ }
+
+ reg = snd_soc_read(codec, WM8900_REG_ID);
if (reg != 0x8900) {
dev_err(&i2c->dev, "Device is not a WM8900 - ID %x\n", reg);
ret = -ENODEV;
}
/* Read back from the chip */
- reg = wm8900_chip_read(codec, WM8900_REG_POWER1);
+ reg = snd_soc_read(codec, WM8900_REG_POWER1);
reg = (reg >> 12) & 0xf;
dev_info(&i2c->dev, "WM8900 revision %d\n", reg);
wm8900_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
/* Latch the volume update bits */
- wm8900_write(codec, WM8900_REG_LINVOL,
- wm8900_read(codec, WM8900_REG_LINVOL) | 0x100);
- wm8900_write(codec, WM8900_REG_RINVOL,
- wm8900_read(codec, WM8900_REG_RINVOL) | 0x100);
- wm8900_write(codec, WM8900_REG_LOUT1CTL,
- wm8900_read(codec, WM8900_REG_LOUT1CTL) | 0x100);
- wm8900_write(codec, WM8900_REG_ROUT1CTL,
- wm8900_read(codec, WM8900_REG_ROUT1CTL) | 0x100);
- wm8900_write(codec, WM8900_REG_LOUT2CTL,
- wm8900_read(codec, WM8900_REG_LOUT2CTL) | 0x100);
- wm8900_write(codec, WM8900_REG_ROUT2CTL,
- wm8900_read(codec, WM8900_REG_ROUT2CTL) | 0x100);
- wm8900_write(codec, WM8900_REG_LDAC_DV,
- wm8900_read(codec, WM8900_REG_LDAC_DV) | 0x100);
- wm8900_write(codec, WM8900_REG_RDAC_DV,
- wm8900_read(codec, WM8900_REG_RDAC_DV) | 0x100);
- wm8900_write(codec, WM8900_REG_LADC_DV,
- wm8900_read(codec, WM8900_REG_LADC_DV) | 0x100);
- wm8900_write(codec, WM8900_REG_RADC_DV,
- wm8900_read(codec, WM8900_REG_RADC_DV) | 0x100);
+ snd_soc_write(codec, WM8900_REG_LINVOL,
+ snd_soc_read(codec, WM8900_REG_LINVOL) | 0x100);
+ snd_soc_write(codec, WM8900_REG_RINVOL,
+ snd_soc_read(codec, WM8900_REG_RINVOL) | 0x100);
+ snd_soc_write(codec, WM8900_REG_LOUT1CTL,
+ snd_soc_read(codec, WM8900_REG_LOUT1CTL) | 0x100);
+ snd_soc_write(codec, WM8900_REG_ROUT1CTL,
+ snd_soc_read(codec, WM8900_REG_ROUT1CTL) | 0x100);
+ snd_soc_write(codec, WM8900_REG_LOUT2CTL,
+ snd_soc_read(codec, WM8900_REG_LOUT2CTL) | 0x100);
+ snd_soc_write(codec, WM8900_REG_ROUT2CTL,
+ snd_soc_read(codec, WM8900_REG_ROUT2CTL) | 0x100);
+ snd_soc_write(codec, WM8900_REG_LDAC_DV,
+ snd_soc_read(codec, WM8900_REG_LDAC_DV) | 0x100);
+ snd_soc_write(codec, WM8900_REG_RDAC_DV,
+ snd_soc_read(codec, WM8900_REG_RDAC_DV) | 0x100);
+ snd_soc_write(codec, WM8900_REG_LADC_DV,
+ snd_soc_read(codec, WM8900_REG_LADC_DV) | 0x100);
+ snd_soc_write(codec, WM8900_REG_RADC_DV,
+ snd_soc_read(codec, WM8900_REG_RADC_DV) | 0x100);
/* Set the DAC and mixer output bias */
- wm8900_write(codec, WM8900_REG_OUTBIASCTL, 0x81);
+ snd_soc_write(codec, WM8900_REG_OUTBIASCTL, 0x81);
wm8900_dai.dev = &i2c->dev;
return 0;
}
+#ifdef CONFIG_PM
+static int wm8900_i2c_suspend(struct i2c_client *client, pm_message_t msg)
+{
+ return snd_soc_suspend_device(&client->dev);
+}
+
+static int wm8900_i2c_resume(struct i2c_client *client)
+{
+ return snd_soc_resume_device(&client->dev);
+}
+#else
+#define wm8900_i2c_suspend NULL
+#define wm8900_i2c_resume NULL
+#endif
+
static const struct i2c_device_id wm8900_i2c_id[] = {
{ "wm8900", 0 },
{ }
},
.probe = wm8900_i2c_probe,
.remove = __devexit_p(wm8900_i2c_remove),
+ .suspend = wm8900_i2c_suspend,
+ .resume = wm8900_i2c_resume,
.id_table = wm8900_i2c_id,
};
struct snd_pcm_substream *slave_substream;
};
-
-static unsigned int wm8903_read_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- u16 *cache = codec->reg_cache;
-
- BUG_ON(reg >= ARRAY_SIZE(wm8903_reg_defaults));
-
- return cache[reg];
-}
-
-static unsigned int wm8903_hw_read(struct snd_soc_codec *codec, u8 reg)
-{
- struct i2c_msg xfer[2];
- u16 data;
- int ret;
- struct i2c_client *client = codec->control_data;
-
- /* Write register */
- xfer[0].addr = client->addr;
- xfer[0].flags = 0;
- xfer[0].len = 1;
- xfer[0].buf = ®
-
- /* Read data */
- xfer[1].addr = client->addr;
- xfer[1].flags = I2C_M_RD;
- xfer[1].len = 2;
- xfer[1].buf = (u8 *)&data;
-
- ret = i2c_transfer(client->adapter, xfer, 2);
- if (ret != 2) {
- pr_err("i2c_transfer returned %d\n", ret);
- return 0;
- }
-
- return (data >> 8) | ((data & 0xff) << 8);
-}
-
-static unsigned int wm8903_read(struct snd_soc_codec *codec,
- unsigned int reg)
+static int wm8903_volatile_register(unsigned int reg)
{
switch (reg) {
case WM8903_SW_RESET_AND_ID:
case WM8903_REVISION_NUMBER:
case WM8903_INTERRUPT_STATUS_1:
case WM8903_WRITE_SEQUENCER_4:
- return wm8903_hw_read(codec, reg);
+ return 1;
default:
- return wm8903_read_reg_cache(codec, reg);
- }
-}
-
-static void wm8903_write_reg_cache(struct snd_soc_codec *codec,
- u16 reg, unsigned int value)
-{
- u16 *cache = codec->reg_cache;
-
- BUG_ON(reg >= ARRAY_SIZE(wm8903_reg_defaults));
-
- switch (reg) {
- case WM8903_SW_RESET_AND_ID:
- case WM8903_REVISION_NUMBER:
- break;
-
- default:
- cache[reg] = value;
- break;
- }
-}
-
-static int wm8903_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u8 data[3];
-
- wm8903_write_reg_cache(codec, reg, value);
-
- /* Data format is 1 byte of address followed by 2 bytes of data */
- data[0] = reg;
- data[1] = (value >> 8) & 0xff;
- data[2] = value & 0xff;
-
- if (codec->hw_write(codec->control_data, data, 3) == 2)
return 0;
- else
- return -EIO;
+ }
}
static int wm8903_run_sequence(struct snd_soc_codec *codec, unsigned int start)
BUG_ON(start > 48);
/* Enable the sequencer */
- reg[0] = wm8903_read(codec, WM8903_WRITE_SEQUENCER_0);
+ reg[0] = snd_soc_read(codec, WM8903_WRITE_SEQUENCER_0);
reg[0] |= WM8903_WSEQ_ENA;
- wm8903_write(codec, WM8903_WRITE_SEQUENCER_0, reg[0]);
+ snd_soc_write(codec, WM8903_WRITE_SEQUENCER_0, reg[0]);
dev_dbg(&i2c->dev, "Starting sequence at %d\n", start);
- wm8903_write(codec, WM8903_WRITE_SEQUENCER_3,
+ snd_soc_write(codec, WM8903_WRITE_SEQUENCER_3,
start | WM8903_WSEQ_START);
/* Wait for it to complete. If we have the interrupt wired up then
do {
msleep(10);
- reg[4] = wm8903_read(codec, WM8903_WRITE_SEQUENCER_4);
+ reg[4] = snd_soc_read(codec, WM8903_WRITE_SEQUENCER_4);
} while (reg[4] & WM8903_WSEQ_BUSY);
dev_dbg(&i2c->dev, "Sequence complete\n");
/* Disable the sequencer again */
- wm8903_write(codec, WM8903_WRITE_SEQUENCER_0,
+ snd_soc_write(codec, WM8903_WRITE_SEQUENCER_0,
reg[0] & ~WM8903_WSEQ_ENA);
return 0;
/* There really ought to be something better we can do here :/ */
for (i = 0; i < ARRAY_SIZE(wm8903_reg_defaults); i++)
- cache[i] = wm8903_hw_read(codec, i);
+ cache[i] = codec->hw_read(codec, i);
}
static void wm8903_reset(struct snd_soc_codec *codec)
{
- wm8903_write(codec, WM8903_SW_RESET_AND_ID, 0);
+ snd_soc_write(codec, WM8903_SW_RESET_AND_ID, 0);
memcpy(codec->reg_cache, wm8903_reg_defaults,
sizeof(wm8903_reg_defaults));
}
}
if (event & SND_SOC_DAPM_PRE_PMU) {
- val = wm8903_read(codec, reg);
+ val = snd_soc_read(codec, reg);
/* Short the output */
val &= ~(WM8903_OUTPUT_SHORT << shift);
- wm8903_write(codec, reg, val);
+ snd_soc_write(codec, reg, val);
}
if (event & SND_SOC_DAPM_POST_PMU) {
- val = wm8903_read(codec, reg);
+ val = snd_soc_read(codec, reg);
val |= (WM8903_OUTPUT_IN << shift);
- wm8903_write(codec, reg, val);
+ snd_soc_write(codec, reg, val);
val |= (WM8903_OUTPUT_INT << shift);
- wm8903_write(codec, reg, val);
+ snd_soc_write(codec, reg, val);
/* Turn on the output ENA_OUTP */
val |= (WM8903_OUTPUT_OUT << shift);
- wm8903_write(codec, reg, val);
+ snd_soc_write(codec, reg, val);
/* Enable the DC servo */
- dcs_reg = wm8903_read(codec, WM8903_DC_SERVO_0);
+ dcs_reg = snd_soc_read(codec, WM8903_DC_SERVO_0);
dcs_reg |= dcs_bit;
- wm8903_write(codec, WM8903_DC_SERVO_0, dcs_reg);
+ snd_soc_write(codec, WM8903_DC_SERVO_0, dcs_reg);
/* Remove the short */
val |= (WM8903_OUTPUT_SHORT << shift);
- wm8903_write(codec, reg, val);
+ snd_soc_write(codec, reg, val);
}
if (event & SND_SOC_DAPM_PRE_PMD) {
- val = wm8903_read(codec, reg);
+ val = snd_soc_read(codec, reg);
/* Short the output */
val &= ~(WM8903_OUTPUT_SHORT << shift);
- wm8903_write(codec, reg, val);
+ snd_soc_write(codec, reg, val);
/* Disable the DC servo */
- dcs_reg = wm8903_read(codec, WM8903_DC_SERVO_0);
+ dcs_reg = snd_soc_read(codec, WM8903_DC_SERVO_0);
dcs_reg &= ~dcs_bit;
- wm8903_write(codec, WM8903_DC_SERVO_0, dcs_reg);
+ snd_soc_write(codec, WM8903_DC_SERVO_0, dcs_reg);
/* Then disable the intermediate and output stages */
val &= ~((WM8903_OUTPUT_OUT | WM8903_OUTPUT_INT |
WM8903_OUTPUT_IN) << shift);
- wm8903_write(codec, reg, val);
+ snd_soc_write(codec, reg, val);
}
return 0;
u16 reg;
int ret;
- reg = wm8903_read(codec, WM8903_CLASS_W_0);
+ reg = snd_soc_read(codec, WM8903_CLASS_W_0);
/* Turn it off if we're about to enable bypass */
if (ucontrol->value.integer.value[0]) {
if (wm8903->class_w_users == 0) {
dev_dbg(&i2c->dev, "Disabling Class W\n");
- wm8903_write(codec, WM8903_CLASS_W_0, reg &
+ snd_soc_write(codec, WM8903_CLASS_W_0, reg &
~(WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V));
}
wm8903->class_w_users++;
if (!ucontrol->value.integer.value[0]) {
if (wm8903->class_w_users == 1) {
dev_dbg(&i2c->dev, "Enabling Class W\n");
- wm8903_write(codec, WM8903_CLASS_W_0, reg |
+ snd_soc_write(codec, WM8903_CLASS_W_0, reg |
WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V);
}
wm8903->class_w_users--;
SOC_ENUM("DAC Mute Mode", mute_mode),
SOC_SINGLE("DAC Mono Switch", WM8903_DAC_DIGITAL_1, 12, 1, 0),
SOC_ENUM("DAC De-emphasis", dac_deemphasis),
-SOC_SINGLE("DAC Sloping Stopband Filter Switch",
- WM8903_DAC_DIGITAL_1, 11, 1, 0),
SOC_ENUM("DAC Companding Mode", dac_companding),
SOC_SINGLE("DAC Companding Switch", WM8903_AUDIO_INTERFACE_0, 1, 1, 0),
switch (level) {
case SND_SOC_BIAS_ON:
case SND_SOC_BIAS_PREPARE:
- reg = wm8903_read(codec, WM8903_VMID_CONTROL_0);
+ reg = snd_soc_read(codec, WM8903_VMID_CONTROL_0);
reg &= ~(WM8903_VMID_RES_MASK);
reg |= WM8903_VMID_RES_50K;
- wm8903_write(codec, WM8903_VMID_CONTROL_0, reg);
+ snd_soc_write(codec, WM8903_VMID_CONTROL_0, reg);
break;
case SND_SOC_BIAS_STANDBY:
if (codec->bias_level == SND_SOC_BIAS_OFF) {
- wm8903_write(codec, WM8903_CLOCK_RATES_2,
+ snd_soc_write(codec, WM8903_CLOCK_RATES_2,
WM8903_CLK_SYS_ENA);
/* Change DC servo dither level in startup sequence */
- wm8903_write(codec, WM8903_WRITE_SEQUENCER_0, 0x11);
- wm8903_write(codec, WM8903_WRITE_SEQUENCER_1, 0x1257);
- wm8903_write(codec, WM8903_WRITE_SEQUENCER_2, 0x2);
+ snd_soc_write(codec, WM8903_WRITE_SEQUENCER_0, 0x11);
+ snd_soc_write(codec, WM8903_WRITE_SEQUENCER_1, 0x1257);
+ snd_soc_write(codec, WM8903_WRITE_SEQUENCER_2, 0x2);
wm8903_run_sequence(codec, 0);
wm8903_sync_reg_cache(codec, codec->reg_cache);
/* Enable low impedence charge pump output */
- reg = wm8903_read(codec,
+ reg = snd_soc_read(codec,
WM8903_CONTROL_INTERFACE_TEST_1);
- wm8903_write(codec, WM8903_CONTROL_INTERFACE_TEST_1,
+ snd_soc_write(codec, WM8903_CONTROL_INTERFACE_TEST_1,
reg | WM8903_TEST_KEY);
- reg2 = wm8903_read(codec, WM8903_CHARGE_PUMP_TEST_1);
- wm8903_write(codec, WM8903_CHARGE_PUMP_TEST_1,
+ reg2 = snd_soc_read(codec, WM8903_CHARGE_PUMP_TEST_1);
+ snd_soc_write(codec, WM8903_CHARGE_PUMP_TEST_1,
reg2 | WM8903_CP_SW_KELVIN_MODE_MASK);
- wm8903_write(codec, WM8903_CONTROL_INTERFACE_TEST_1,
+ snd_soc_write(codec, WM8903_CONTROL_INTERFACE_TEST_1,
reg);
/* By default no bypass paths are enabled so
* enable Class W support.
*/
dev_dbg(&i2c->dev, "Enabling Class W\n");
- wm8903_write(codec, WM8903_CLASS_W_0, reg |
+ snd_soc_write(codec, WM8903_CLASS_W_0, reg |
WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V);
}
- reg = wm8903_read(codec, WM8903_VMID_CONTROL_0);
+ reg = snd_soc_read(codec, WM8903_VMID_CONTROL_0);
reg &= ~(WM8903_VMID_RES_MASK);
reg |= WM8903_VMID_RES_250K;
- wm8903_write(codec, WM8903_VMID_CONTROL_0, reg);
+ snd_soc_write(codec, WM8903_VMID_CONTROL_0, reg);
break;
case SND_SOC_BIAS_OFF:
wm8903_run_sequence(codec, 32);
- reg = wm8903_read(codec, WM8903_CLOCK_RATES_2);
+ reg = snd_soc_read(codec, WM8903_CLOCK_RATES_2);
reg &= ~WM8903_CLK_SYS_ENA;
- wm8903_write(codec, WM8903_CLOCK_RATES_2, reg);
+ snd_soc_write(codec, WM8903_CLOCK_RATES_2, reg);
break;
}
unsigned int fmt)
{
struct snd_soc_codec *codec = codec_dai->codec;
- u16 aif1 = wm8903_read(codec, WM8903_AUDIO_INTERFACE_1);
+ u16 aif1 = snd_soc_read(codec, WM8903_AUDIO_INTERFACE_1);
aif1 &= ~(WM8903_LRCLK_DIR | WM8903_BCLK_DIR | WM8903_AIF_FMT_MASK |
WM8903_AIF_LRCLK_INV | WM8903_AIF_BCLK_INV);
return -EINVAL;
}
- wm8903_write(codec, WM8903_AUDIO_INTERFACE_1, aif1);
+ snd_soc_write(codec, WM8903_AUDIO_INTERFACE_1, aif1);
return 0;
}
struct snd_soc_codec *codec = codec_dai->codec;
u16 reg;
- reg = wm8903_read(codec, WM8903_DAC_DIGITAL_1);
+ reg = snd_soc_read(codec, WM8903_DAC_DIGITAL_1);
if (mute)
reg |= WM8903_DAC_MUTE;
else
reg &= ~WM8903_DAC_MUTE;
- wm8903_write(codec, WM8903_DAC_DIGITAL_1, reg);
+ snd_soc_write(codec, WM8903_DAC_DIGITAL_1, reg);
return 0;
}
int cur_val;
int clk_sys;
- u16 aif1 = wm8903_read(codec, WM8903_AUDIO_INTERFACE_1);
- u16 aif2 = wm8903_read(codec, WM8903_AUDIO_INTERFACE_2);
- u16 aif3 = wm8903_read(codec, WM8903_AUDIO_INTERFACE_3);
- u16 clock0 = wm8903_read(codec, WM8903_CLOCK_RATES_0);
- u16 clock1 = wm8903_read(codec, WM8903_CLOCK_RATES_1);
+ u16 aif1 = snd_soc_read(codec, WM8903_AUDIO_INTERFACE_1);
+ u16 aif2 = snd_soc_read(codec, WM8903_AUDIO_INTERFACE_2);
+ u16 aif3 = snd_soc_read(codec, WM8903_AUDIO_INTERFACE_3);
+ u16 clock0 = snd_soc_read(codec, WM8903_CLOCK_RATES_0);
+ u16 clock1 = snd_soc_read(codec, WM8903_CLOCK_RATES_1);
+ u16 dac_digital1 = snd_soc_read(codec, WM8903_DAC_DIGITAL_1);
if (substream == wm8903->slave_substream) {
dev_dbg(&i2c->dev, "Ignoring hw_params for slave substream\n");
return 0;
}
+ /* Enable sloping stopband filter for low sample rates */
+ if (fs <= 24000)
+ dac_digital1 |= WM8903_DAC_SB_FILT;
+ else
+ dac_digital1 &= ~WM8903_DAC_SB_FILT;
+
/* Configure sample rate logic for DSP - choose nearest rate */
dsp_config = 0;
best_val = abs(sample_rates[dsp_config].rate - fs);
aif2 |= bclk_divs[bclk_div].div;
aif3 |= bclk / fs;
- wm8903_write(codec, WM8903_CLOCK_RATES_0, clock0);
- wm8903_write(codec, WM8903_CLOCK_RATES_1, clock1);
- wm8903_write(codec, WM8903_AUDIO_INTERFACE_1, aif1);
- wm8903_write(codec, WM8903_AUDIO_INTERFACE_2, aif2);
- wm8903_write(codec, WM8903_AUDIO_INTERFACE_3, aif3);
+ snd_soc_write(codec, WM8903_CLOCK_RATES_0, clock0);
+ snd_soc_write(codec, WM8903_CLOCK_RATES_1, clock1);
+ snd_soc_write(codec, WM8903_AUDIO_INTERFACE_1, aif1);
+ snd_soc_write(codec, WM8903_AUDIO_INTERFACE_2, aif2);
+ snd_soc_write(codec, WM8903_AUDIO_INTERFACE_3, aif3);
+ snd_soc_write(codec, WM8903_DAC_DIGITAL_1, dac_digital1);
return 0;
}
if (tmp_cache) {
for (i = 2; i < ARRAY_SIZE(wm8903_reg_defaults); i++)
if (tmp_cache[i] != reg_cache[i])
- wm8903_write(codec, i, tmp_cache[i]);
+ snd_soc_write(codec, i, tmp_cache[i]);
} else {
dev_err(&i2c->dev, "Failed to allocate temporary cache\n");
}
codec->dev = &i2c->dev;
codec->name = "WM8903";
codec->owner = THIS_MODULE;
- codec->read = wm8903_read;
- codec->write = wm8903_write;
- codec->hw_write = (hw_write_t)i2c_master_send;
codec->bias_level = SND_SOC_BIAS_OFF;
codec->set_bias_level = wm8903_set_bias_level;
codec->dai = &wm8903_dai;
codec->reg_cache_size = ARRAY_SIZE(wm8903->reg_cache);
codec->reg_cache = &wm8903->reg_cache[0];
codec->private_data = wm8903;
+ codec->volatile_register = wm8903_volatile_register;
i2c_set_clientdata(i2c, codec);
codec->control_data = i2c;
- val = wm8903_hw_read(codec, WM8903_SW_RESET_AND_ID);
+ ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_I2C);
+ if (ret != 0) {
+ dev_err(&i2c->dev, "Failed to set cache I/O: %d\n", ret);
+ goto err;
+ }
+
+ val = snd_soc_read(codec, WM8903_SW_RESET_AND_ID);
if (val != wm8903_reg_defaults[WM8903_SW_RESET_AND_ID]) {
dev_err(&i2c->dev,
"Device with ID register %x is not a WM8903\n", val);
return -ENODEV;
}
- val = wm8903_read(codec, WM8903_REVISION_NUMBER);
+ val = snd_soc_read(codec, WM8903_REVISION_NUMBER);
dev_info(&i2c->dev, "WM8903 revision %d\n",
val & WM8903_CHIP_REV_MASK);
wm8903_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
/* Latch volume update bits */
- val = wm8903_read(codec, WM8903_ADC_DIGITAL_VOLUME_LEFT);
+ val = snd_soc_read(codec, WM8903_ADC_DIGITAL_VOLUME_LEFT);
val |= WM8903_ADCVU;
- wm8903_write(codec, WM8903_ADC_DIGITAL_VOLUME_LEFT, val);
- wm8903_write(codec, WM8903_ADC_DIGITAL_VOLUME_RIGHT, val);
+ snd_soc_write(codec, WM8903_ADC_DIGITAL_VOLUME_LEFT, val);
+ snd_soc_write(codec, WM8903_ADC_DIGITAL_VOLUME_RIGHT, val);
- val = wm8903_read(codec, WM8903_DAC_DIGITAL_VOLUME_LEFT);
+ val = snd_soc_read(codec, WM8903_DAC_DIGITAL_VOLUME_LEFT);
val |= WM8903_DACVU;
- wm8903_write(codec, WM8903_DAC_DIGITAL_VOLUME_LEFT, val);
- wm8903_write(codec, WM8903_DAC_DIGITAL_VOLUME_RIGHT, val);
+ snd_soc_write(codec, WM8903_DAC_DIGITAL_VOLUME_LEFT, val);
+ snd_soc_write(codec, WM8903_DAC_DIGITAL_VOLUME_RIGHT, val);
- val = wm8903_read(codec, WM8903_ANALOGUE_OUT1_LEFT);
+ val = snd_soc_read(codec, WM8903_ANALOGUE_OUT1_LEFT);
val |= WM8903_HPOUTVU;
- wm8903_write(codec, WM8903_ANALOGUE_OUT1_LEFT, val);
- wm8903_write(codec, WM8903_ANALOGUE_OUT1_RIGHT, val);
+ snd_soc_write(codec, WM8903_ANALOGUE_OUT1_LEFT, val);
+ snd_soc_write(codec, WM8903_ANALOGUE_OUT1_RIGHT, val);
- val = wm8903_read(codec, WM8903_ANALOGUE_OUT2_LEFT);
+ val = snd_soc_read(codec, WM8903_ANALOGUE_OUT2_LEFT);
val |= WM8903_LINEOUTVU;
- wm8903_write(codec, WM8903_ANALOGUE_OUT2_LEFT, val);
- wm8903_write(codec, WM8903_ANALOGUE_OUT2_RIGHT, val);
+ snd_soc_write(codec, WM8903_ANALOGUE_OUT2_LEFT, val);
+ snd_soc_write(codec, WM8903_ANALOGUE_OUT2_RIGHT, val);
- val = wm8903_read(codec, WM8903_ANALOGUE_OUT3_LEFT);
+ val = snd_soc_read(codec, WM8903_ANALOGUE_OUT3_LEFT);
val |= WM8903_SPKVU;
- wm8903_write(codec, WM8903_ANALOGUE_OUT3_LEFT, val);
- wm8903_write(codec, WM8903_ANALOGUE_OUT3_RIGHT, val);
+ snd_soc_write(codec, WM8903_ANALOGUE_OUT3_LEFT, val);
+ snd_soc_write(codec, WM8903_ANALOGUE_OUT3_RIGHT, val);
/* Enable DAC soft mute by default */
- val = wm8903_read(codec, WM8903_DAC_DIGITAL_1);
+ val = snd_soc_read(codec, WM8903_DAC_DIGITAL_1);
val |= WM8903_DAC_MUTEMODE;
- wm8903_write(codec, WM8903_DAC_DIGITAL_1, val);
+ snd_soc_write(codec, WM8903_DAC_DIGITAL_1, val);
wm8903_dai.dev = &i2c->dev;
wm8903_codec = codec;
return 0;
}
+#ifdef CONFIG_PM
+static int wm8903_i2c_suspend(struct i2c_client *client, pm_message_t msg)
+{
+ return snd_soc_suspend_device(&client->dev);
+}
+
+static int wm8903_i2c_resume(struct i2c_client *client)
+{
+ return snd_soc_resume_device(&client->dev);
+}
+#else
+#define wm8903_i2c_suspend NULL
+#define wm8903_i2c_resume NULL
+#endif
+
/* i2c codec control layer */
static const struct i2c_device_id wm8903_i2c_id[] = {
{ "wm8903", 0 },
},
.probe = wm8903_i2c_probe,
.remove = __devexit_p(wm8903_i2c_remove),
+ .suspend = wm8903_i2c_suspend,
+ .resume = wm8903_i2c_resume,
.id_table = wm8903_i2c_id,
};
0x0000, /* Mono Mixer Control */
};
-static inline unsigned int wm8940_read_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- u16 *cache = codec->reg_cache;
-
- if (reg >= ARRAY_SIZE(wm8940_reg_defaults))
- return -1;
-
- return cache[reg];
-}
-
-static inline int wm8940_write_reg_cache(struct snd_soc_codec *codec,
- u16 reg, unsigned int value)
-{
- u16 *cache = codec->reg_cache;
-
- if (reg >= ARRAY_SIZE(wm8940_reg_defaults))
- return -1;
-
- cache[reg] = value;
-
- return 0;
-}
-
-static int wm8940_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- int ret;
- u8 data[3] = { reg,
- (value & 0xff00) >> 8,
- (value & 0x00ff)
- };
-
- wm8940_write_reg_cache(codec, reg, value);
-
- ret = codec->hw_write(codec->control_data, data, 3);
-
- if (ret < 0)
- return ret;
- else if (ret != 3)
- return -EIO;
- return 0;
-}
-
static const char *wm8940_companding[] = { "Off", "NC", "u-law", "A-law" };
static const struct soc_enum wm8940_adc_companding_enum
= SOC_ENUM_SINGLE(WM8940_COMPANDINGCTL, 1, 4, wm8940_companding);
return ret;
}
-#define wm8940_reset(c) wm8940_write(c, WM8940_SOFTRESET, 0);
+#define wm8940_reset(c) snd_soc_write(c, WM8940_SOFTRESET, 0);
static int wm8940_set_dai_fmt(struct snd_soc_dai *codec_dai,
unsigned int fmt)
{
struct snd_soc_codec *codec = codec_dai->codec;
- u16 iface = wm8940_read_reg_cache(codec, WM8940_IFACE) & 0xFE67;
- u16 clk = wm8940_read_reg_cache(codec, WM8940_CLOCK) & 0x1fe;
+ u16 iface = snd_soc_read(codec, WM8940_IFACE) & 0xFE67;
+ u16 clk = snd_soc_read(codec, WM8940_CLOCK) & 0x1fe;
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBM_CFM:
default:
return -EINVAL;
}
- wm8940_write(codec, WM8940_CLOCK, clk);
+ snd_soc_write(codec, WM8940_CLOCK, clk);
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
break;
}
- wm8940_write(codec, WM8940_IFACE, iface);
+ snd_soc_write(codec, WM8940_IFACE, iface);
return 0;
}
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = socdev->card->codec;
- u16 iface = wm8940_read_reg_cache(codec, WM8940_IFACE) & 0xFD9F;
- u16 addcntrl = wm8940_read_reg_cache(codec, WM8940_ADDCNTRL) & 0xFFF1;
- u16 companding = wm8940_read_reg_cache(codec,
+ u16 iface = snd_soc_read(codec, WM8940_IFACE) & 0xFD9F;
+ u16 addcntrl = snd_soc_read(codec, WM8940_ADDCNTRL) & 0xFFF1;
+ u16 companding = snd_soc_read(codec,
WM8940_COMPANDINGCTL) & 0xFFDF;
int ret;
case SNDRV_PCM_RATE_48000:
break;
}
- ret = wm8940_write(codec, WM8940_ADDCNTRL, addcntrl);
+ ret = snd_soc_write(codec, WM8940_ADDCNTRL, addcntrl);
if (ret)
goto error_ret;
iface |= (3 << 5);
break;
}
- ret = wm8940_write(codec, WM8940_COMPANDINGCTL, companding);
+ ret = snd_soc_write(codec, WM8940_COMPANDINGCTL, companding);
if (ret)
goto error_ret;
- ret = wm8940_write(codec, WM8940_IFACE, iface);
+ ret = snd_soc_write(codec, WM8940_IFACE, iface);
error_ret:
return ret;
static int wm8940_mute(struct snd_soc_dai *dai, int mute)
{
struct snd_soc_codec *codec = dai->codec;
- u16 mute_reg = wm8940_read_reg_cache(codec, WM8940_DAC) & 0xffbf;
+ u16 mute_reg = snd_soc_read(codec, WM8940_DAC) & 0xffbf;
if (mute)
mute_reg |= 0x40;
- return wm8940_write(codec, WM8940_DAC, mute_reg);
+ return snd_soc_write(codec, WM8940_DAC, mute_reg);
}
static int wm8940_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
u16 val;
- u16 pwr_reg = wm8940_read_reg_cache(codec, WM8940_POWER1) & 0x1F0;
+ u16 pwr_reg = snd_soc_read(codec, WM8940_POWER1) & 0x1F0;
int ret = 0;
switch (level) {
/* ensure bufioen and biasen */
pwr_reg |= (1 << 2) | (1 << 3);
/* Enable thermal shutdown */
- val = wm8940_read_reg_cache(codec, WM8940_OUTPUTCTL);
- ret = wm8940_write(codec, WM8940_OUTPUTCTL, val | 0x2);
+ val = snd_soc_read(codec, WM8940_OUTPUTCTL);
+ ret = snd_soc_write(codec, WM8940_OUTPUTCTL, val | 0x2);
if (ret)
break;
/* set vmid to 75k */
- ret = wm8940_write(codec, WM8940_POWER1, pwr_reg | 0x1);
+ ret = snd_soc_write(codec, WM8940_POWER1, pwr_reg | 0x1);
break;
case SND_SOC_BIAS_PREPARE:
/* ensure bufioen and biasen */
pwr_reg |= (1 << 2) | (1 << 3);
- ret = wm8940_write(codec, WM8940_POWER1, pwr_reg | 0x1);
+ ret = snd_soc_write(codec, WM8940_POWER1, pwr_reg | 0x1);
break;
case SND_SOC_BIAS_STANDBY:
/* ensure bufioen and biasen */
pwr_reg |= (1 << 2) | (1 << 3);
/* set vmid to 300k for standby */
- ret = wm8940_write(codec, WM8940_POWER1, pwr_reg | 0x2);
+ ret = snd_soc_write(codec, WM8940_POWER1, pwr_reg | 0x2);
break;
case SND_SOC_BIAS_OFF:
- ret = wm8940_write(codec, WM8940_POWER1, pwr_reg);
+ ret = snd_soc_write(codec, WM8940_POWER1, pwr_reg);
break;
}
u16 reg;
/* Turn off PLL */
- reg = wm8940_read_reg_cache(codec, WM8940_POWER1);
- wm8940_write(codec, WM8940_POWER1, reg & 0x1df);
+ reg = snd_soc_read(codec, WM8940_POWER1);
+ snd_soc_write(codec, WM8940_POWER1, reg & 0x1df);
if (freq_in == 0 || freq_out == 0) {
/* Clock CODEC directly from MCLK */
- reg = wm8940_read_reg_cache(codec, WM8940_CLOCK);
- wm8940_write(codec, WM8940_CLOCK, reg & 0x0ff);
+ reg = snd_soc_read(codec, WM8940_CLOCK);
+ snd_soc_write(codec, WM8940_CLOCK, reg & 0x0ff);
/* Pll power down */
- wm8940_write(codec, WM8940_PLLN, (1 << 7));
+ snd_soc_write(codec, WM8940_PLLN, (1 << 7));
return 0;
}
/* Pll is followed by a frequency divide by 4 */
pll_factors(freq_out*4, freq_in);
if (pll_div.k)
- wm8940_write(codec, WM8940_PLLN,
+ snd_soc_write(codec, WM8940_PLLN,
(pll_div.pre_scale << 4) | pll_div.n | (1 << 6));
else /* No factional component */
- wm8940_write(codec, WM8940_PLLN,
+ snd_soc_write(codec, WM8940_PLLN,
(pll_div.pre_scale << 4) | pll_div.n);
- wm8940_write(codec, WM8940_PLLK1, pll_div.k >> 18);
- wm8940_write(codec, WM8940_PLLK2, (pll_div.k >> 9) & 0x1ff);
- wm8940_write(codec, WM8940_PLLK3, pll_div.k & 0x1ff);
+ snd_soc_write(codec, WM8940_PLLK1, pll_div.k >> 18);
+ snd_soc_write(codec, WM8940_PLLK2, (pll_div.k >> 9) & 0x1ff);
+ snd_soc_write(codec, WM8940_PLLK3, pll_div.k & 0x1ff);
/* Enable the PLL */
- reg = wm8940_read_reg_cache(codec, WM8940_POWER1);
- wm8940_write(codec, WM8940_POWER1, reg | 0x020);
+ reg = snd_soc_read(codec, WM8940_POWER1);
+ snd_soc_write(codec, WM8940_POWER1, reg | 0x020);
/* Run CODEC from PLL instead of MCLK */
- reg = wm8940_read_reg_cache(codec, WM8940_CLOCK);
- wm8940_write(codec, WM8940_CLOCK, reg | 0x100);
+ reg = snd_soc_read(codec, WM8940_CLOCK);
+ snd_soc_write(codec, WM8940_CLOCK, reg | 0x100);
return 0;
}
switch (div_id) {
case WM8940_BCLKDIV:
- reg = wm8940_read_reg_cache(codec, WM8940_CLOCK) & 0xFFEF3;
- ret = wm8940_write(codec, WM8940_CLOCK, reg | (div << 2));
+ reg = snd_soc_read(codec, WM8940_CLOCK) & 0xFFEF3;
+ ret = snd_soc_write(codec, WM8940_CLOCK, reg | (div << 2));
break;
case WM8940_MCLKDIV:
- reg = wm8940_read_reg_cache(codec, WM8940_CLOCK) & 0xFF1F;
- ret = wm8940_write(codec, WM8940_CLOCK, reg | (div << 5));
+ reg = snd_soc_read(codec, WM8940_CLOCK) & 0xFF1F;
+ ret = snd_soc_write(codec, WM8940_CLOCK, reg | (div << 5));
break;
case WM8940_OPCLKDIV:
- reg = wm8940_read_reg_cache(codec, WM8940_ADDCNTRL) & 0xFFCF;
- ret = wm8940_write(codec, WM8940_ADDCNTRL, reg | (div << 4));
+ reg = snd_soc_read(codec, WM8940_ADDCNTRL) & 0xFFCF;
+ ret = snd_soc_write(codec, WM8940_ADDCNTRL, reg | (div << 4));
break;
}
return ret;
};
EXPORT_SYMBOL_GPL(soc_codec_dev_wm8940);
-static int wm8940_register(struct wm8940_priv *wm8940)
+static int wm8940_register(struct wm8940_priv *wm8940,
+ enum snd_soc_control_type control)
{
struct wm8940_setup_data *pdata = wm8940->codec.dev->platform_data;
struct snd_soc_codec *codec = &wm8940->codec;
codec->private_data = wm8940;
codec->name = "WM8940";
codec->owner = THIS_MODULE;
- codec->read = wm8940_read_reg_cache;
- codec->write = wm8940_write;
codec->bias_level = SND_SOC_BIAS_OFF;
codec->set_bias_level = wm8940_set_bias_level;
codec->dai = &wm8940_dai;
codec->reg_cache_size = ARRAY_SIZE(wm8940_reg_defaults);
codec->reg_cache = &wm8940->reg_cache;
+ ret = snd_soc_codec_set_cache_io(codec, 8, 16, control);
+ if (ret == 0) {
+ dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+ return ret;
+ }
+
memcpy(codec->reg_cache, wm8940_reg_defaults,
sizeof(wm8940_reg_defaults));
wm8940_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
- ret = wm8940_write(codec, WM8940_POWER1, 0x180);
+ ret = snd_soc_write(codec, WM8940_POWER1, 0x180);
if (ret < 0)
return ret;
if (!pdata)
dev_warn(codec->dev, "No platform data supplied\n");
else {
- reg = wm8940_read_reg_cache(codec, WM8940_OUTPUTCTL);
- ret = wm8940_write(codec, WM8940_OUTPUTCTL, reg | pdata->vroi);
+ reg = snd_soc_read(codec, WM8940_OUTPUTCTL);
+ ret = snd_soc_write(codec, WM8940_OUTPUTCTL, reg | pdata->vroi);
if (ret < 0)
return ret;
}
codec->control_data = i2c;
codec->dev = &i2c->dev;
- return wm8940_register(wm8940);
+ return wm8940_register(wm8940, SND_SOC_I2C);
}
static int __devexit wm8940_i2c_remove(struct i2c_client *client)
return 0;
}
+#ifdef CONFIG_PM
+static int wm8940_i2c_suspend(struct i2c_client *client, pm_message_t msg)
+{
+ return snd_soc_suspend_device(&client->dev);
+}
+
+static int wm8940_i2c_resume(struct i2c_client *client)
+{
+ return snd_soc_resume_device(&client->dev);
+}
+#else
+#define wm8940_i2c_suspend NULL
+#define wm8940_i2c_resume NULL
+#endif
+
static const struct i2c_device_id wm8940_i2c_id[] = {
{ "wm8940", 0 },
{ }
},
.probe = wm8940_i2c_probe,
.remove = __devexit_p(wm8940_i2c_remove),
+ .suspend = wm8940_i2c_suspend,
+ .resume = wm8940_i2c_resume,
.id_table = wm8940_i2c_id,
};
struct snd_soc_codec codec;
};
-/*
- * read wm8960 register cache
- */
-static inline unsigned int wm8960_read_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- u16 *cache = codec->reg_cache;
- if (reg == WM8960_RESET)
- return 0;
- if (reg >= WM8960_CACHEREGNUM)
- return -1;
- return cache[reg];
-}
-
-/*
- * write wm8960 register cache
- */
-static inline void wm8960_write_reg_cache(struct snd_soc_codec *codec,
- u16 reg, unsigned int value)
-{
- u16 *cache = codec->reg_cache;
- if (reg >= WM8960_CACHEREGNUM)
- return;
- cache[reg] = value;
-}
-
-static inline unsigned int wm8960_read(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- return wm8960_read_reg_cache(codec, reg);
-}
-
-/*
- * write to the WM8960 register space
- */
-static int wm8960_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u8 data[2];
-
- /* data is
- * D15..D9 WM8960 register offset
- * D8...D0 register data
- */
- data[0] = (reg << 1) | ((value >> 8) & 0x0001);
- data[1] = value & 0x00ff;
-
- wm8960_write_reg_cache(codec, reg, value);
- if (codec->hw_write(codec->control_data, data, 2) == 2)
- return 0;
- else
- return -EIO;
-}
-
-#define wm8960_reset(c) wm8960_write(c, WM8960_RESET, 0)
+#define wm8960_reset(c) snd_soc_write(c, WM8960_RESET, 0)
/* enumerated controls */
static const char *wm8960_deemph[] = {"None", "32Khz", "44.1Khz", "48Khz"};
}
/* set iface */
- wm8960_write(codec, WM8960_IFACE1, iface);
+ snd_soc_write(codec, WM8960_IFACE1, iface);
return 0;
}
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = socdev->card->codec;
- u16 iface = wm8960_read(codec, WM8960_IFACE1) & 0xfff3;
+ u16 iface = snd_soc_read(codec, WM8960_IFACE1) & 0xfff3;
/* bit size */
switch (params_format(params)) {
}
/* set iface */
- wm8960_write(codec, WM8960_IFACE1, iface);
+ snd_soc_write(codec, WM8960_IFACE1, iface);
return 0;
}
static int wm8960_mute(struct snd_soc_dai *dai, int mute)
{
struct snd_soc_codec *codec = dai->codec;
- u16 mute_reg = wm8960_read(codec, WM8960_DACCTL1) & 0xfff7;
+ u16 mute_reg = snd_soc_read(codec, WM8960_DACCTL1) & 0xfff7;
if (mute)
- wm8960_write(codec, WM8960_DACCTL1, mute_reg | 0x8);
+ snd_soc_write(codec, WM8960_DACCTL1, mute_reg | 0x8);
else
- wm8960_write(codec, WM8960_DACCTL1, mute_reg);
+ snd_soc_write(codec, WM8960_DACCTL1, mute_reg);
return 0;
}
case SND_SOC_BIAS_PREPARE:
/* Set VMID to 2x50k */
- reg = wm8960_read(codec, WM8960_POWER1);
+ reg = snd_soc_read(codec, WM8960_POWER1);
reg &= ~0x180;
reg |= 0x80;
- wm8960_write(codec, WM8960_POWER1, reg);
+ snd_soc_write(codec, WM8960_POWER1, reg);
break;
case SND_SOC_BIAS_STANDBY:
if (codec->bias_level == SND_SOC_BIAS_OFF) {
/* Enable anti-pop features */
- wm8960_write(codec, WM8960_APOP1,
+ snd_soc_write(codec, WM8960_APOP1,
WM8960_POBCTRL | WM8960_SOFT_ST |
WM8960_BUFDCOPEN | WM8960_BUFIOEN);
reg = WM8960_DISOP;
if (pdata)
reg |= pdata->dres << 4;
- wm8960_write(codec, WM8960_APOP2, reg);
+ snd_soc_write(codec, WM8960_APOP2, reg);
msleep(400);
- wm8960_write(codec, WM8960_APOP2, 0);
+ snd_soc_write(codec, WM8960_APOP2, 0);
/* Enable & ramp VMID at 2x50k */
- reg = wm8960_read(codec, WM8960_POWER1);
+ reg = snd_soc_read(codec, WM8960_POWER1);
reg |= 0x80;
- wm8960_write(codec, WM8960_POWER1, reg);
+ snd_soc_write(codec, WM8960_POWER1, reg);
msleep(100);
/* Enable VREF */
- wm8960_write(codec, WM8960_POWER1, reg | WM8960_VREF);
+ snd_soc_write(codec, WM8960_POWER1, reg | WM8960_VREF);
/* Disable anti-pop features */
- wm8960_write(codec, WM8960_APOP1, WM8960_BUFIOEN);
+ snd_soc_write(codec, WM8960_APOP1, WM8960_BUFIOEN);
}
/* Set VMID to 2x250k */
- reg = wm8960_read(codec, WM8960_POWER1);
+ reg = snd_soc_read(codec, WM8960_POWER1);
reg &= ~0x180;
reg |= 0x100;
- wm8960_write(codec, WM8960_POWER1, reg);
+ snd_soc_write(codec, WM8960_POWER1, reg);
break;
case SND_SOC_BIAS_OFF:
/* Enable anti-pop features */
- wm8960_write(codec, WM8960_APOP1,
+ snd_soc_write(codec, WM8960_APOP1,
WM8960_POBCTRL | WM8960_SOFT_ST |
WM8960_BUFDCOPEN | WM8960_BUFIOEN);
/* Disable VMID and VREF, let them discharge */
- wm8960_write(codec, WM8960_POWER1, 0);
+ snd_soc_write(codec, WM8960_POWER1, 0);
msleep(600);
- wm8960_write(codec, WM8960_APOP1, 0);
+ snd_soc_write(codec, WM8960_APOP1, 0);
break;
}
/* Disable the PLL: even if we are changing the frequency the
* PLL needs to be disabled while we do so. */
- wm8960_write(codec, WM8960_CLOCK1,
- wm8960_read(codec, WM8960_CLOCK1) & ~1);
- wm8960_write(codec, WM8960_POWER2,
- wm8960_read(codec, WM8960_POWER2) & ~1);
+ snd_soc_write(codec, WM8960_CLOCK1,
+ snd_soc_read(codec, WM8960_CLOCK1) & ~1);
+ snd_soc_write(codec, WM8960_POWER2,
+ snd_soc_read(codec, WM8960_POWER2) & ~1);
if (!freq_in || !freq_out)
return 0;
- reg = wm8960_read(codec, WM8960_PLL1) & ~0x3f;
+ reg = snd_soc_read(codec, WM8960_PLL1) & ~0x3f;
reg |= pll_div.pre_div << 4;
reg |= pll_div.n;
if (pll_div.k) {
reg |= 0x20;
- wm8960_write(codec, WM8960_PLL2, (pll_div.k >> 18) & 0x3f);
- wm8960_write(codec, WM8960_PLL3, (pll_div.k >> 9) & 0x1ff);
- wm8960_write(codec, WM8960_PLL4, pll_div.k & 0x1ff);
+ snd_soc_write(codec, WM8960_PLL2, (pll_div.k >> 18) & 0x3f);
+ snd_soc_write(codec, WM8960_PLL3, (pll_div.k >> 9) & 0x1ff);
+ snd_soc_write(codec, WM8960_PLL4, pll_div.k & 0x1ff);
}
- wm8960_write(codec, WM8960_PLL1, reg);
+ snd_soc_write(codec, WM8960_PLL1, reg);
/* Turn it on */
- wm8960_write(codec, WM8960_POWER2,
- wm8960_read(codec, WM8960_POWER2) | 1);
+ snd_soc_write(codec, WM8960_POWER2,
+ snd_soc_read(codec, WM8960_POWER2) | 1);
msleep(250);
- wm8960_write(codec, WM8960_CLOCK1,
- wm8960_read(codec, WM8960_CLOCK1) | 1);
+ snd_soc_write(codec, WM8960_CLOCK1,
+ snd_soc_read(codec, WM8960_CLOCK1) | 1);
return 0;
}
switch (div_id) {
case WM8960_SYSCLKSEL:
- reg = wm8960_read(codec, WM8960_CLOCK1) & 0x1fe;
- wm8960_write(codec, WM8960_CLOCK1, reg | div);
+ reg = snd_soc_read(codec, WM8960_CLOCK1) & 0x1fe;
+ snd_soc_write(codec, WM8960_CLOCK1, reg | div);
break;
case WM8960_SYSCLKDIV:
- reg = wm8960_read(codec, WM8960_CLOCK1) & 0x1f9;
- wm8960_write(codec, WM8960_CLOCK1, reg | div);
+ reg = snd_soc_read(codec, WM8960_CLOCK1) & 0x1f9;
+ snd_soc_write(codec, WM8960_CLOCK1, reg | div);
break;
case WM8960_DACDIV:
- reg = wm8960_read(codec, WM8960_CLOCK1) & 0x1c7;
- wm8960_write(codec, WM8960_CLOCK1, reg | div);
+ reg = snd_soc_read(codec, WM8960_CLOCK1) & 0x1c7;
+ snd_soc_write(codec, WM8960_CLOCK1, reg | div);
break;
case WM8960_OPCLKDIV:
- reg = wm8960_read(codec, WM8960_PLL1) & 0x03f;
- wm8960_write(codec, WM8960_PLL1, reg | div);
+ reg = snd_soc_read(codec, WM8960_PLL1) & 0x03f;
+ snd_soc_write(codec, WM8960_PLL1, reg | div);
break;
case WM8960_DCLKDIV:
- reg = wm8960_read(codec, WM8960_CLOCK2) & 0x03f;
- wm8960_write(codec, WM8960_CLOCK2, reg | div);
+ reg = snd_soc_read(codec, WM8960_CLOCK2) & 0x03f;
+ snd_soc_write(codec, WM8960_CLOCK2, reg | div);
break;
case WM8960_TOCLKSEL:
- reg = wm8960_read(codec, WM8960_ADDCTL1) & 0x1fd;
- wm8960_write(codec, WM8960_ADDCTL1, reg | div);
+ reg = snd_soc_read(codec, WM8960_ADDCTL1) & 0x1fd;
+ snd_soc_write(codec, WM8960_ADDCTL1, reg | div);
break;
default:
return -EINVAL;
};
EXPORT_SYMBOL_GPL(soc_codec_dev_wm8960);
-static int wm8960_register(struct wm8960_priv *wm8960)
+static int wm8960_register(struct wm8960_priv *wm8960,
+ enum snd_soc_control_type control)
{
struct wm8960_data *pdata = wm8960->codec.dev->platform_data;
struct snd_soc_codec *codec = &wm8960->codec;
if (wm8960_codec) {
dev_err(codec->dev, "Another WM8960 is registered\n");
- return -EINVAL;
+ ret = -EINVAL;
+ goto err;
}
if (!pdata) {
codec->private_data = wm8960;
codec->name = "WM8960";
codec->owner = THIS_MODULE;
- codec->read = wm8960_read_reg_cache;
- codec->write = wm8960_write;
codec->bias_level = SND_SOC_BIAS_OFF;
codec->set_bias_level = wm8960_set_bias_level;
codec->dai = &wm8960_dai;
memcpy(codec->reg_cache, wm8960_reg, sizeof(wm8960_reg));
+ ret = snd_soc_codec_set_cache_io(codec, 7, 9, control);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+ goto err;
+ }
+
ret = wm8960_reset(codec);
if (ret < 0) {
dev_err(codec->dev, "Failed to issue reset\n");
- return ret;
+ goto err;
}
wm8960_dai.dev = codec->dev;
wm8960_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
/* Latch the update bits */
- reg = wm8960_read(codec, WM8960_LINVOL);
- wm8960_write(codec, WM8960_LINVOL, reg | 0x100);
- reg = wm8960_read(codec, WM8960_RINVOL);
- wm8960_write(codec, WM8960_RINVOL, reg | 0x100);
- reg = wm8960_read(codec, WM8960_LADC);
- wm8960_write(codec, WM8960_LADC, reg | 0x100);
- reg = wm8960_read(codec, WM8960_RADC);
- wm8960_write(codec, WM8960_RADC, reg | 0x100);
- reg = wm8960_read(codec, WM8960_LDAC);
- wm8960_write(codec, WM8960_LDAC, reg | 0x100);
- reg = wm8960_read(codec, WM8960_RDAC);
- wm8960_write(codec, WM8960_RDAC, reg | 0x100);
- reg = wm8960_read(codec, WM8960_LOUT1);
- wm8960_write(codec, WM8960_LOUT1, reg | 0x100);
- reg = wm8960_read(codec, WM8960_ROUT1);
- wm8960_write(codec, WM8960_ROUT1, reg | 0x100);
- reg = wm8960_read(codec, WM8960_LOUT2);
- wm8960_write(codec, WM8960_LOUT2, reg | 0x100);
- reg = wm8960_read(codec, WM8960_ROUT2);
- wm8960_write(codec, WM8960_ROUT2, reg | 0x100);
+ reg = snd_soc_read(codec, WM8960_LINVOL);
+ snd_soc_write(codec, WM8960_LINVOL, reg | 0x100);
+ reg = snd_soc_read(codec, WM8960_RINVOL);
+ snd_soc_write(codec, WM8960_RINVOL, reg | 0x100);
+ reg = snd_soc_read(codec, WM8960_LADC);
+ snd_soc_write(codec, WM8960_LADC, reg | 0x100);
+ reg = snd_soc_read(codec, WM8960_RADC);
+ snd_soc_write(codec, WM8960_RADC, reg | 0x100);
+ reg = snd_soc_read(codec, WM8960_LDAC);
+ snd_soc_write(codec, WM8960_LDAC, reg | 0x100);
+ reg = snd_soc_read(codec, WM8960_RDAC);
+ snd_soc_write(codec, WM8960_RDAC, reg | 0x100);
+ reg = snd_soc_read(codec, WM8960_LOUT1);
+ snd_soc_write(codec, WM8960_LOUT1, reg | 0x100);
+ reg = snd_soc_read(codec, WM8960_ROUT1);
+ snd_soc_write(codec, WM8960_ROUT1, reg | 0x100);
+ reg = snd_soc_read(codec, WM8960_LOUT2);
+ snd_soc_write(codec, WM8960_LOUT2, reg | 0x100);
+ reg = snd_soc_read(codec, WM8960_ROUT2);
+ snd_soc_write(codec, WM8960_ROUT2, reg | 0x100);
wm8960_codec = codec;
ret = snd_soc_register_codec(codec);
if (ret != 0) {
dev_err(codec->dev, "Failed to register codec: %d\n", ret);
- return ret;
+ goto err;
}
ret = snd_soc_register_dai(&wm8960_dai);
if (ret != 0) {
dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
- snd_soc_unregister_codec(codec);
- return ret;
+ goto err_codec;
}
return 0;
+
+err_codec:
+ snd_soc_unregister_codec(codec);
+err:
+ kfree(wm8960);
+ return ret;
}
static void wm8960_unregister(struct wm8960_priv *wm8960)
return -ENOMEM;
codec = &wm8960->codec;
- codec->hw_write = (hw_write_t)i2c_master_send;
i2c_set_clientdata(i2c, wm8960);
codec->control_data = i2c;
codec->dev = &i2c->dev;
- return wm8960_register(wm8960);
+ return wm8960_register(wm8960, SND_SOC_I2C);
}
static __devexit int wm8960_i2c_remove(struct i2c_client *client)
return 0;
}
+#ifdef CONFIG_PM
+static int wm8960_i2c_suspend(struct i2c_client *client, pm_message_t msg)
+{
+ return snd_soc_suspend_device(&client->dev);
+}
+
+static int wm8960_i2c_resume(struct i2c_client *client)
+{
+ return snd_soc_resume_device(&client->dev);
+}
+#else
+#define wm8960_i2c_suspend NULL
+#define wm8960_i2c_resume NULL
+#endif
+
static const struct i2c_device_id wm8960_i2c_id[] = {
{ "wm8960", 0 },
{ }
},
.probe = wm8960_i2c_probe,
.remove = __devexit_p(wm8960_i2c_remove),
+ .suspend = wm8960_i2c_suspend,
+ .resume = wm8960_i2c_resume,
.id_table = wm8960_i2c_id,
};
--- /dev/null
+/*
+ * wm8961.c -- WM8961 ALSA SoC Audio driver
+ *
+ * Author: Mark Brown
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Currently unimplemented features:
+ * - ALC
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include "wm8961.h"
+
+#define WM8961_MAX_REGISTER 0xFC
+
+static u16 wm8961_reg_defaults[] = {
+ 0x009F, /* R0 - Left Input volume */
+ 0x009F, /* R1 - Right Input volume */
+ 0x0000, /* R2 - LOUT1 volume */
+ 0x0000, /* R3 - ROUT1 volume */
+ 0x0020, /* R4 - Clocking1 */
+ 0x0008, /* R5 - ADC & DAC Control 1 */
+ 0x0000, /* R6 - ADC & DAC Control 2 */
+ 0x000A, /* R7 - Audio Interface 0 */
+ 0x01F4, /* R8 - Clocking2 */
+ 0x0000, /* R9 - Audio Interface 1 */
+ 0x00FF, /* R10 - Left DAC volume */
+ 0x00FF, /* R11 - Right DAC volume */
+ 0x0000, /* R12 */
+ 0x0000, /* R13 */
+ 0x0040, /* R14 - Audio Interface 2 */
+ 0x0000, /* R15 - Software Reset */
+ 0x0000, /* R16 */
+ 0x007B, /* R17 - ALC1 */
+ 0x0000, /* R18 - ALC2 */
+ 0x0032, /* R19 - ALC3 */
+ 0x0000, /* R20 - Noise Gate */
+ 0x00C0, /* R21 - Left ADC volume */
+ 0x00C0, /* R22 - Right ADC volume */
+ 0x0120, /* R23 - Additional control(1) */
+ 0x0000, /* R24 - Additional control(2) */
+ 0x0000, /* R25 - Pwr Mgmt (1) */
+ 0x0000, /* R26 - Pwr Mgmt (2) */
+ 0x0000, /* R27 - Additional Control (3) */
+ 0x0000, /* R28 - Anti-pop */
+ 0x0000, /* R29 */
+ 0x005F, /* R30 - Clocking 3 */
+ 0x0000, /* R31 */
+ 0x0000, /* R32 - ADCL signal path */
+ 0x0000, /* R33 - ADCR signal path */
+ 0x0000, /* R34 */
+ 0x0000, /* R35 */
+ 0x0000, /* R36 */
+ 0x0000, /* R37 */
+ 0x0000, /* R38 */
+ 0x0000, /* R39 */
+ 0x0000, /* R40 - LOUT2 volume */
+ 0x0000, /* R41 - ROUT2 volume */
+ 0x0000, /* R42 */
+ 0x0000, /* R43 */
+ 0x0000, /* R44 */
+ 0x0000, /* R45 */
+ 0x0000, /* R46 */
+ 0x0000, /* R47 - Pwr Mgmt (3) */
+ 0x0023, /* R48 - Additional Control (4) */
+ 0x0000, /* R49 - Class D Control 1 */
+ 0x0000, /* R50 */
+ 0x0003, /* R51 - Class D Control 2 */
+ 0x0000, /* R52 */
+ 0x0000, /* R53 */
+ 0x0000, /* R54 */
+ 0x0000, /* R55 */
+ 0x0106, /* R56 - Clocking 4 */
+ 0x0000, /* R57 - DSP Sidetone 0 */
+ 0x0000, /* R58 - DSP Sidetone 1 */
+ 0x0000, /* R59 */
+ 0x0000, /* R60 - DC Servo 0 */
+ 0x0000, /* R61 - DC Servo 1 */
+ 0x0000, /* R62 */
+ 0x015E, /* R63 - DC Servo 3 */
+ 0x0010, /* R64 */
+ 0x0010, /* R65 - DC Servo 5 */
+ 0x0000, /* R66 */
+ 0x0001, /* R67 */
+ 0x0003, /* R68 - Analogue PGA Bias */
+ 0x0000, /* R69 - Analogue HP 0 */
+ 0x0060, /* R70 */
+ 0x01FB, /* R71 - Analogue HP 2 */
+ 0x0000, /* R72 - Charge Pump 1 */
+ 0x0065, /* R73 */
+ 0x005F, /* R74 */
+ 0x0059, /* R75 */
+ 0x006B, /* R76 */
+ 0x0038, /* R77 */
+ 0x000C, /* R78 */
+ 0x000A, /* R79 */
+ 0x006B, /* R80 */
+ 0x0000, /* R81 */
+ 0x0000, /* R82 - Charge Pump B */
+ 0x0087, /* R83 */
+ 0x0000, /* R84 */
+ 0x005C, /* R85 */
+ 0x0000, /* R86 */
+ 0x0000, /* R87 - Write Sequencer 1 */
+ 0x0000, /* R88 - Write Sequencer 2 */
+ 0x0000, /* R89 - Write Sequencer 3 */
+ 0x0000, /* R90 - Write Sequencer 4 */
+ 0x0000, /* R91 - Write Sequencer 5 */
+ 0x0000, /* R92 - Write Sequencer 6 */
+ 0x0000, /* R93 - Write Sequencer 7 */
+ 0x0000, /* R94 */
+ 0x0000, /* R95 */
+ 0x0000, /* R96 */
+ 0x0000, /* R97 */
+ 0x0000, /* R98 */
+ 0x0000, /* R99 */
+ 0x0000, /* R100 */
+ 0x0000, /* R101 */
+ 0x0000, /* R102 */
+ 0x0000, /* R103 */
+ 0x0000, /* R104 */
+ 0x0000, /* R105 */
+ 0x0000, /* R106 */
+ 0x0000, /* R107 */
+ 0x0000, /* R108 */
+ 0x0000, /* R109 */
+ 0x0000, /* R110 */
+ 0x0000, /* R111 */
+ 0x0000, /* R112 */
+ 0x0000, /* R113 */
+ 0x0000, /* R114 */
+ 0x0000, /* R115 */
+ 0x0000, /* R116 */
+ 0x0000, /* R117 */
+ 0x0000, /* R118 */
+ 0x0000, /* R119 */
+ 0x0000, /* R120 */
+ 0x0000, /* R121 */
+ 0x0000, /* R122 */
+ 0x0000, /* R123 */
+ 0x0000, /* R124 */
+ 0x0000, /* R125 */
+ 0x0000, /* R126 */
+ 0x0000, /* R127 */
+ 0x0000, /* R128 */
+ 0x0000, /* R129 */
+ 0x0000, /* R130 */
+ 0x0000, /* R131 */
+ 0x0000, /* R132 */
+ 0x0000, /* R133 */
+ 0x0000, /* R134 */
+ 0x0000, /* R135 */
+ 0x0000, /* R136 */
+ 0x0000, /* R137 */
+ 0x0000, /* R138 */
+ 0x0000, /* R139 */
+ 0x0000, /* R140 */
+ 0x0000, /* R141 */
+ 0x0000, /* R142 */
+ 0x0000, /* R143 */
+ 0x0000, /* R144 */
+ 0x0000, /* R145 */
+ 0x0000, /* R146 */
+ 0x0000, /* R147 */
+ 0x0000, /* R148 */
+ 0x0000, /* R149 */
+ 0x0000, /* R150 */
+ 0x0000, /* R151 */
+ 0x0000, /* R152 */
+ 0x0000, /* R153 */
+ 0x0000, /* R154 */
+ 0x0000, /* R155 */
+ 0x0000, /* R156 */
+ 0x0000, /* R157 */
+ 0x0000, /* R158 */
+ 0x0000, /* R159 */
+ 0x0000, /* R160 */
+ 0x0000, /* R161 */
+ 0x0000, /* R162 */
+ 0x0000, /* R163 */
+ 0x0000, /* R164 */
+ 0x0000, /* R165 */
+ 0x0000, /* R166 */
+ 0x0000, /* R167 */
+ 0x0000, /* R168 */
+ 0x0000, /* R169 */
+ 0x0000, /* R170 */
+ 0x0000, /* R171 */
+ 0x0000, /* R172 */
+ 0x0000, /* R173 */
+ 0x0000, /* R174 */
+ 0x0000, /* R175 */
+ 0x0000, /* R176 */
+ 0x0000, /* R177 */
+ 0x0000, /* R178 */
+ 0x0000, /* R179 */
+ 0x0000, /* R180 */
+ 0x0000, /* R181 */
+ 0x0000, /* R182 */
+ 0x0000, /* R183 */
+ 0x0000, /* R184 */
+ 0x0000, /* R185 */
+ 0x0000, /* R186 */
+ 0x0000, /* R187 */
+ 0x0000, /* R188 */
+ 0x0000, /* R189 */
+ 0x0000, /* R190 */
+ 0x0000, /* R191 */
+ 0x0000, /* R192 */
+ 0x0000, /* R193 */
+ 0x0000, /* R194 */
+ 0x0000, /* R195 */
+ 0x0030, /* R196 */
+ 0x0006, /* R197 */
+ 0x0000, /* R198 */
+ 0x0060, /* R199 */
+ 0x0000, /* R200 */
+ 0x003F, /* R201 */
+ 0x0000, /* R202 */
+ 0x0000, /* R203 */
+ 0x0000, /* R204 */
+ 0x0001, /* R205 */
+ 0x0000, /* R206 */
+ 0x0181, /* R207 */
+ 0x0005, /* R208 */
+ 0x0008, /* R209 */
+ 0x0008, /* R210 */
+ 0x0000, /* R211 */
+ 0x013B, /* R212 */
+ 0x0000, /* R213 */
+ 0x0000, /* R214 */
+ 0x0000, /* R215 */
+ 0x0000, /* R216 */
+ 0x0070, /* R217 */
+ 0x0000, /* R218 */
+ 0x0000, /* R219 */
+ 0x0000, /* R220 */
+ 0x0000, /* R221 */
+ 0x0000, /* R222 */
+ 0x0003, /* R223 */
+ 0x0000, /* R224 */
+ 0x0000, /* R225 */
+ 0x0001, /* R226 */
+ 0x0008, /* R227 */
+ 0x0000, /* R228 */
+ 0x0000, /* R229 */
+ 0x0000, /* R230 */
+ 0x0000, /* R231 */
+ 0x0004, /* R232 */
+ 0x0000, /* R233 */
+ 0x0000, /* R234 */
+ 0x0000, /* R235 */
+ 0x0000, /* R236 */
+ 0x0000, /* R237 */
+ 0x0080, /* R238 */
+ 0x0000, /* R239 */
+ 0x0000, /* R240 */
+ 0x0000, /* R241 */
+ 0x0000, /* R242 */
+ 0x0000, /* R243 */
+ 0x0000, /* R244 */
+ 0x0052, /* R245 */
+ 0x0110, /* R246 */
+ 0x0040, /* R247 */
+ 0x0000, /* R248 */
+ 0x0030, /* R249 */
+ 0x0000, /* R250 */
+ 0x0000, /* R251 */
+ 0x0001, /* R252 - General test 1 */
+};
+
+struct wm8961_priv {
+ struct snd_soc_codec codec;
+ int sysclk;
+ u16 reg_cache[WM8961_MAX_REGISTER];
+};
+
+static int wm8961_volatile_register(unsigned int reg)
+{
+ switch (reg) {
+ case WM8961_SOFTWARE_RESET:
+ case WM8961_WRITE_SEQUENCER_7:
+ case WM8961_DC_SERVO_1:
+ return 1;
+
+ default:
+ return 0;
+ }
+}
+
+static int wm8961_reset(struct snd_soc_codec *codec)
+{
+ return snd_soc_write(codec, WM8961_SOFTWARE_RESET, 0);
+}
+
+/*
+ * The headphone output supports special anti-pop sequences giving
+ * silent power up and power down.
+ */
+static int wm8961_hp_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+ u16 hp_reg = snd_soc_read(codec, WM8961_ANALOGUE_HP_0);
+ u16 cp_reg = snd_soc_read(codec, WM8961_CHARGE_PUMP_1);
+ u16 pwr_reg = snd_soc_read(codec, WM8961_PWR_MGMT_2);
+ u16 dcs_reg = snd_soc_read(codec, WM8961_DC_SERVO_1);
+ int timeout = 500;
+
+ if (event & SND_SOC_DAPM_POST_PMU) {
+ /* Make sure the output is shorted */
+ hp_reg &= ~(WM8961_HPR_RMV_SHORT | WM8961_HPL_RMV_SHORT);
+ snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg);
+
+ /* Enable the charge pump */
+ cp_reg |= WM8961_CP_ENA;
+ snd_soc_write(codec, WM8961_CHARGE_PUMP_1, cp_reg);
+ mdelay(5);
+
+ /* Enable the PGA */
+ pwr_reg |= WM8961_LOUT1_PGA | WM8961_ROUT1_PGA;
+ snd_soc_write(codec, WM8961_PWR_MGMT_2, pwr_reg);
+
+ /* Enable the amplifier */
+ hp_reg |= WM8961_HPR_ENA | WM8961_HPL_ENA;
+ snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg);
+
+ /* Second stage enable */
+ hp_reg |= WM8961_HPR_ENA_DLY | WM8961_HPL_ENA_DLY;
+ snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg);
+
+ /* Enable the DC servo & trigger startup */
+ dcs_reg |=
+ WM8961_DCS_ENA_CHAN_HPR | WM8961_DCS_TRIG_STARTUP_HPR |
+ WM8961_DCS_ENA_CHAN_HPL | WM8961_DCS_TRIG_STARTUP_HPL;
+ dev_dbg(codec->dev, "Enabling DC servo\n");
+
+ snd_soc_write(codec, WM8961_DC_SERVO_1, dcs_reg);
+ do {
+ msleep(1);
+ dcs_reg = snd_soc_read(codec, WM8961_DC_SERVO_1);
+ } while (--timeout &&
+ dcs_reg & (WM8961_DCS_TRIG_STARTUP_HPR |
+ WM8961_DCS_TRIG_STARTUP_HPL));
+ if (dcs_reg & (WM8961_DCS_TRIG_STARTUP_HPR |
+ WM8961_DCS_TRIG_STARTUP_HPL))
+ dev_err(codec->dev, "DC servo timed out\n");
+ else
+ dev_dbg(codec->dev, "DC servo startup complete\n");
+
+ /* Enable the output stage */
+ hp_reg |= WM8961_HPR_ENA_OUTP | WM8961_HPL_ENA_OUTP;
+ snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg);
+
+ /* Remove the short on the output stage */
+ hp_reg |= WM8961_HPR_RMV_SHORT | WM8961_HPL_RMV_SHORT;
+ snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg);
+ }
+
+ if (event & SND_SOC_DAPM_PRE_PMD) {
+ /* Short the output */
+ hp_reg &= ~(WM8961_HPR_RMV_SHORT | WM8961_HPL_RMV_SHORT);
+ snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg);
+
+ /* Disable the output stage */
+ hp_reg &= ~(WM8961_HPR_ENA_OUTP | WM8961_HPL_ENA_OUTP);
+ snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg);
+
+ /* Disable DC offset cancellation */
+ dcs_reg &= ~(WM8961_DCS_ENA_CHAN_HPR |
+ WM8961_DCS_ENA_CHAN_HPL);
+ snd_soc_write(codec, WM8961_DC_SERVO_1, dcs_reg);
+
+ /* Finish up */
+ hp_reg &= ~(WM8961_HPR_ENA_DLY | WM8961_HPR_ENA |
+ WM8961_HPL_ENA_DLY | WM8961_HPL_ENA);
+ snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg);
+
+ /* Disable the PGA */
+ pwr_reg &= ~(WM8961_LOUT1_PGA | WM8961_ROUT1_PGA);
+ snd_soc_write(codec, WM8961_PWR_MGMT_2, pwr_reg);
+
+ /* Disable the charge pump */
+ dev_dbg(codec->dev, "Disabling charge pump\n");
+ snd_soc_write(codec, WM8961_CHARGE_PUMP_1,
+ cp_reg & ~WM8961_CP_ENA);
+ }
+
+ return 0;
+}
+
+static int wm8961_spk_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+ u16 pwr_reg = snd_soc_read(codec, WM8961_PWR_MGMT_2);
+ u16 spk_reg = snd_soc_read(codec, WM8961_CLASS_D_CONTROL_1);
+
+ if (event & SND_SOC_DAPM_POST_PMU) {
+ /* Enable the PGA */
+ pwr_reg |= WM8961_SPKL_PGA | WM8961_SPKR_PGA;
+ snd_soc_write(codec, WM8961_PWR_MGMT_2, pwr_reg);
+
+ /* Enable the amplifier */
+ spk_reg |= WM8961_SPKL_ENA | WM8961_SPKR_ENA;
+ snd_soc_write(codec, WM8961_CLASS_D_CONTROL_1, spk_reg);
+ }
+
+ if (event & SND_SOC_DAPM_PRE_PMD) {
+ /* Enable the amplifier */
+ spk_reg &= ~(WM8961_SPKL_ENA | WM8961_SPKR_ENA);
+ snd_soc_write(codec, WM8961_CLASS_D_CONTROL_1, spk_reg);
+
+ /* Enable the PGA */
+ pwr_reg &= ~(WM8961_SPKL_PGA | WM8961_SPKR_PGA);
+ snd_soc_write(codec, WM8961_PWR_MGMT_2, pwr_reg);
+ }
+
+ return 0;
+}
+
+static const char *adc_hpf_text[] = {
+ "Hi-fi", "Voice 1", "Voice 2", "Voice 3",
+};
+
+static const struct soc_enum adc_hpf =
+ SOC_ENUM_SINGLE(WM8961_ADC_DAC_CONTROL_2, 7, 4, adc_hpf_text);
+
+static const char *dac_deemph_text[] = {
+ "None", "32kHz", "44.1kHz", "48kHz",
+};
+
+static const struct soc_enum dac_deemph =
+ SOC_ENUM_SINGLE(WM8961_ADC_DAC_CONTROL_1, 1, 4, dac_deemph_text);
+
+static const DECLARE_TLV_DB_SCALE(out_tlv, -12100, 100, 1);
+static const DECLARE_TLV_DB_SCALE(hp_sec_tlv, -700, 100, 0);
+static const DECLARE_TLV_DB_SCALE(adc_tlv, -7200, 75, 1);
+static const DECLARE_TLV_DB_SCALE(sidetone_tlv, -3600, 300, 0);
+static unsigned int boost_tlv[] = {
+ TLV_DB_RANGE_HEAD(4),
+ 0, 0, TLV_DB_SCALE_ITEM(0, 0, 0),
+ 1, 1, TLV_DB_SCALE_ITEM(13, 0, 0),
+ 2, 2, TLV_DB_SCALE_ITEM(20, 0, 0),
+ 3, 3, TLV_DB_SCALE_ITEM(29, 0, 0),
+};
+static const DECLARE_TLV_DB_SCALE(pga_tlv, -2325, 75, 0);
+
+static const struct snd_kcontrol_new wm8961_snd_controls[] = {
+SOC_DOUBLE_R_TLV("Headphone Volume", WM8961_LOUT1_VOLUME, WM8961_ROUT1_VOLUME,
+ 0, 127, 0, out_tlv),
+SOC_DOUBLE_TLV("Headphone Secondary Volume", WM8961_ANALOGUE_HP_2,
+ 6, 3, 7, 0, hp_sec_tlv),
+SOC_DOUBLE_R("Headphone ZC Switch", WM8961_LOUT1_VOLUME, WM8961_ROUT1_VOLUME,
+ 7, 1, 0),
+
+SOC_DOUBLE_R_TLV("Speaker Volume", WM8961_LOUT2_VOLUME, WM8961_ROUT2_VOLUME,
+ 0, 127, 0, out_tlv),
+SOC_DOUBLE_R("Speaker ZC Switch", WM8961_LOUT2_VOLUME, WM8961_ROUT2_VOLUME,
+ 7, 1, 0),
+SOC_SINGLE("Speaker AC Gain", WM8961_CLASS_D_CONTROL_2, 0, 7, 0),
+
+SOC_SINGLE("DAC x128 OSR Switch", WM8961_ADC_DAC_CONTROL_2, 0, 1, 0),
+SOC_ENUM("DAC Deemphasis", dac_deemph),
+SOC_SINGLE("DAC Soft Mute Switch", WM8961_ADC_DAC_CONTROL_2, 3, 1, 0),
+
+SOC_DOUBLE_R_TLV("Sidetone Volume", WM8961_DSP_SIDETONE_0,
+ WM8961_DSP_SIDETONE_1, 4, 12, 0, sidetone_tlv),
+
+SOC_SINGLE("ADC High Pass Filter Switch", WM8961_ADC_DAC_CONTROL_1, 0, 1, 0),
+SOC_ENUM("ADC High Pass Filter Mode", adc_hpf),
+
+SOC_DOUBLE_R_TLV("Capture Volume",
+ WM8961_LEFT_ADC_VOLUME, WM8961_RIGHT_ADC_VOLUME,
+ 1, 119, 0, adc_tlv),
+SOC_DOUBLE_R_TLV("Capture Boost Volume",
+ WM8961_ADCL_SIGNAL_PATH, WM8961_ADCR_SIGNAL_PATH,
+ 4, 3, 0, boost_tlv),
+SOC_DOUBLE_R_TLV("Capture PGA Volume",
+ WM8961_LEFT_INPUT_VOLUME, WM8961_RIGHT_INPUT_VOLUME,
+ 0, 62, 0, pga_tlv),
+SOC_DOUBLE_R("Capture PGA ZC Switch",
+ WM8961_LEFT_INPUT_VOLUME, WM8961_RIGHT_INPUT_VOLUME,
+ 6, 1, 1),
+SOC_DOUBLE_R("Capture PGA Switch",
+ WM8961_LEFT_INPUT_VOLUME, WM8961_RIGHT_INPUT_VOLUME,
+ 7, 1, 1),
+};
+
+static const char *sidetone_text[] = {
+ "None", "Left", "Right"
+};
+
+static const struct soc_enum dacl_sidetone =
+ SOC_ENUM_SINGLE(WM8961_DSP_SIDETONE_0, 2, 3, sidetone_text);
+
+static const struct soc_enum dacr_sidetone =
+ SOC_ENUM_SINGLE(WM8961_DSP_SIDETONE_1, 2, 3, sidetone_text);
+
+static const struct snd_kcontrol_new dacl_mux =
+ SOC_DAPM_ENUM("DACL Sidetone", dacl_sidetone);
+
+static const struct snd_kcontrol_new dacr_mux =
+ SOC_DAPM_ENUM("DACR Sidetone", dacr_sidetone);
+
+static const struct snd_soc_dapm_widget wm8961_dapm_widgets[] = {
+SND_SOC_DAPM_INPUT("LINPUT"),
+SND_SOC_DAPM_INPUT("RINPUT"),
+
+SND_SOC_DAPM_SUPPLY("CLK_DSP", WM8961_CLOCKING2, 4, 0, NULL, 0),
+
+SND_SOC_DAPM_PGA("Left Input", WM8961_PWR_MGMT_1, 5, 0, NULL, 0),
+SND_SOC_DAPM_PGA("Right Input", WM8961_PWR_MGMT_1, 4, 0, NULL, 0),
+
+SND_SOC_DAPM_ADC("ADCL", "HiFi Capture", WM8961_PWR_MGMT_1, 3, 0),
+SND_SOC_DAPM_ADC("ADCR", "HiFi Capture", WM8961_PWR_MGMT_1, 2, 0),
+
+SND_SOC_DAPM_MICBIAS("MICBIAS", WM8961_PWR_MGMT_1, 1, 0),
+
+SND_SOC_DAPM_MUX("DACL Sidetone", SND_SOC_NOPM, 0, 0, &dacl_mux),
+SND_SOC_DAPM_MUX("DACR Sidetone", SND_SOC_NOPM, 0, 0, &dacr_mux),
+
+SND_SOC_DAPM_DAC("DACL", "HiFi Playback", WM8961_PWR_MGMT_2, 8, 0),
+SND_SOC_DAPM_DAC("DACR", "HiFi Playback", WM8961_PWR_MGMT_2, 7, 0),
+
+/* Handle as a mono path for DCS */
+SND_SOC_DAPM_PGA_E("Headphone Output", SND_SOC_NOPM,
+ 4, 0, NULL, 0, wm8961_hp_event,
+ SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
+SND_SOC_DAPM_PGA_E("Speaker Output", SND_SOC_NOPM,
+ 4, 0, NULL, 0, wm8961_spk_event,
+ SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
+
+SND_SOC_DAPM_OUTPUT("HP_L"),
+SND_SOC_DAPM_OUTPUT("HP_R"),
+SND_SOC_DAPM_OUTPUT("SPK_LN"),
+SND_SOC_DAPM_OUTPUT("SPK_LP"),
+SND_SOC_DAPM_OUTPUT("SPK_RN"),
+SND_SOC_DAPM_OUTPUT("SPK_RP"),
+};
+
+
+static const struct snd_soc_dapm_route audio_paths[] = {
+ { "DACL", NULL, "CLK_DSP" },
+ { "DACL", NULL, "DACL Sidetone" },
+ { "DACR", NULL, "CLK_DSP" },
+ { "DACR", NULL, "DACR Sidetone" },
+
+ { "DACL Sidetone", "Left", "ADCL" },
+ { "DACL Sidetone", "Right", "ADCR" },
+
+ { "DACR Sidetone", "Left", "ADCL" },
+ { "DACR Sidetone", "Right", "ADCR" },
+
+ { "HP_L", NULL, "Headphone Output" },
+ { "HP_R", NULL, "Headphone Output" },
+ { "Headphone Output", NULL, "DACL" },
+ { "Headphone Output", NULL, "DACR" },
+
+ { "SPK_LN", NULL, "Speaker Output" },
+ { "SPK_LP", NULL, "Speaker Output" },
+ { "SPK_RN", NULL, "Speaker Output" },
+ { "SPK_RP", NULL, "Speaker Output" },
+
+ { "Speaker Output", NULL, "DACL" },
+ { "Speaker Output", NULL, "DACR" },
+
+ { "ADCL", NULL, "Left Input" },
+ { "ADCL", NULL, "CLK_DSP" },
+ { "ADCR", NULL, "Right Input" },
+ { "ADCR", NULL, "CLK_DSP" },
+
+ { "Left Input", NULL, "LINPUT" },
+ { "Right Input", NULL, "RINPUT" },
+
+};
+
+/* Values for CLK_SYS_RATE */
+static struct {
+ int ratio;
+ u16 val;
+} wm8961_clk_sys_ratio[] = {
+ { 64, 0 },
+ { 128, 1 },
+ { 192, 2 },
+ { 256, 3 },
+ { 384, 4 },
+ { 512, 5 },
+ { 768, 6 },
+ { 1024, 7 },
+ { 1408, 8 },
+ { 1536, 9 },
+};
+
+/* Values for SAMPLE_RATE */
+static struct {
+ int rate;
+ u16 val;
+} wm8961_srate[] = {
+ { 48000, 0 },
+ { 44100, 0 },
+ { 32000, 1 },
+ { 22050, 2 },
+ { 24000, 2 },
+ { 16000, 3 },
+ { 11250, 4 },
+ { 12000, 4 },
+ { 8000, 5 },
+};
+
+static int wm8961_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct wm8961_priv *wm8961 = codec->private_data;
+ int i, best, target, fs;
+ u16 reg;
+
+ fs = params_rate(params);
+
+ if (!wm8961->sysclk) {
+ dev_err(codec->dev, "MCLK has not been specified\n");
+ return -EINVAL;
+ }
+
+ /* Find the closest sample rate for the filters */
+ best = 0;
+ for (i = 0; i < ARRAY_SIZE(wm8961_srate); i++) {
+ if (abs(wm8961_srate[i].rate - fs) <
+ abs(wm8961_srate[best].rate - fs))
+ best = i;
+ }
+ reg = snd_soc_read(codec, WM8961_ADDITIONAL_CONTROL_3);
+ reg &= ~WM8961_SAMPLE_RATE_MASK;
+ reg |= wm8961_srate[best].val;
+ snd_soc_write(codec, WM8961_ADDITIONAL_CONTROL_3, reg);
+ dev_dbg(codec->dev, "Selected SRATE %dHz for %dHz\n",
+ wm8961_srate[best].rate, fs);
+
+ /* Select a CLK_SYS/fs ratio equal to or higher than required */
+ target = wm8961->sysclk / fs;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK && target < 64) {
+ dev_err(codec->dev,
+ "SYSCLK must be at least 64*fs for DAC\n");
+ return -EINVAL;
+ }
+ if (substream->stream == SNDRV_PCM_STREAM_CAPTURE && target < 256) {
+ dev_err(codec->dev,
+ "SYSCLK must be at least 256*fs for ADC\n");
+ return -EINVAL;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(wm8961_clk_sys_ratio); i++) {
+ if (wm8961_clk_sys_ratio[i].ratio >= target)
+ break;
+ }
+ if (i == ARRAY_SIZE(wm8961_clk_sys_ratio)) {
+ dev_err(codec->dev, "Unable to generate CLK_SYS_RATE\n");
+ return -EINVAL;
+ }
+ dev_dbg(codec->dev, "Selected CLK_SYS_RATE of %d for %d/%d=%d\n",
+ wm8961_clk_sys_ratio[i].ratio, wm8961->sysclk, fs,
+ wm8961->sysclk / fs);
+
+ reg = snd_soc_read(codec, WM8961_CLOCKING_4);
+ reg &= ~WM8961_CLK_SYS_RATE_MASK;
+ reg |= wm8961_clk_sys_ratio[i].val << WM8961_CLK_SYS_RATE_SHIFT;
+ snd_soc_write(codec, WM8961_CLOCKING_4, reg);
+
+ reg = snd_soc_read(codec, WM8961_AUDIO_INTERFACE_0);
+ reg &= ~WM8961_WL_MASK;
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ reg |= 1 << WM8961_WL_SHIFT;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ reg |= 2 << WM8961_WL_SHIFT;
+ break;
+ case SNDRV_PCM_FORMAT_S32_LE:
+ reg |= 3 << WM8961_WL_SHIFT;
+ break;
+ default:
+ return -EINVAL;
+ }
+ snd_soc_write(codec, WM8961_AUDIO_INTERFACE_0, reg);
+
+ /* Sloping stop-band filter is recommended for <= 24kHz */
+ reg = snd_soc_read(codec, WM8961_ADC_DAC_CONTROL_2);
+ if (fs <= 24000)
+ reg |= WM8961_DACSLOPE;
+ else
+ reg &= WM8961_DACSLOPE;
+ snd_soc_write(codec, WM8961_ADC_DAC_CONTROL_2, reg);
+
+ return 0;
+}
+
+static int wm8961_set_sysclk(struct snd_soc_dai *dai, int clk_id,
+ unsigned int freq,
+ int dir)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct wm8961_priv *wm8961 = codec->private_data;
+ u16 reg = snd_soc_read(codec, WM8961_CLOCKING1);
+
+ if (freq > 33000000) {
+ dev_err(codec->dev, "MCLK must be <33MHz\n");
+ return -EINVAL;
+ }
+
+ if (freq > 16500000) {
+ dev_dbg(codec->dev, "Using MCLK/2 for %dHz MCLK\n", freq);
+ reg |= WM8961_MCLKDIV;
+ freq /= 2;
+ } else {
+ dev_dbg(codec->dev, "Using MCLK/1 for %dHz MCLK\n", freq);
+ reg &= WM8961_MCLKDIV;
+ }
+
+ snd_soc_write(codec, WM8961_CLOCKING1, reg);
+
+ wm8961->sysclk = freq;
+
+ return 0;
+}
+
+static int wm8961_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ u16 aif = snd_soc_read(codec, WM8961_AUDIO_INTERFACE_0);
+
+ aif &= ~(WM8961_BCLKINV | WM8961_LRP |
+ WM8961_MS | WM8961_FORMAT_MASK);
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBM_CFM:
+ aif |= WM8961_MS;
+ break;
+ case SND_SOC_DAIFMT_CBS_CFS:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_RIGHT_J:
+ break;
+
+ case SND_SOC_DAIFMT_LEFT_J:
+ aif |= 1;
+ break;
+
+ case SND_SOC_DAIFMT_I2S:
+ aif |= 2;
+ break;
+
+ case SND_SOC_DAIFMT_DSP_B:
+ aif |= WM8961_LRP;
+ case SND_SOC_DAIFMT_DSP_A:
+ aif |= 3;
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ case SND_SOC_DAIFMT_IB_NF:
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ aif |= WM8961_LRP;
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ aif |= WM8961_BCLKINV;
+ break;
+ case SND_SOC_DAIFMT_IB_IF:
+ aif |= WM8961_BCLKINV | WM8961_LRP;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return snd_soc_write(codec, WM8961_AUDIO_INTERFACE_0, aif);
+}
+
+static int wm8961_set_tristate(struct snd_soc_dai *dai, int tristate)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ u16 reg = snd_soc_read(codec, WM8961_ADDITIONAL_CONTROL_2);
+
+ if (tristate)
+ reg |= WM8961_TRIS;
+ else
+ reg &= ~WM8961_TRIS;
+
+ return snd_soc_write(codec, WM8961_ADDITIONAL_CONTROL_2, reg);
+}
+
+static int wm8961_digital_mute(struct snd_soc_dai *dai, int mute)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ u16 reg = snd_soc_read(codec, WM8961_ADC_DAC_CONTROL_1);
+
+ if (mute)
+ reg |= WM8961_DACMU;
+ else
+ reg &= ~WM8961_DACMU;
+
+ msleep(17);
+
+ return snd_soc_write(codec, WM8961_ADC_DAC_CONTROL_1, reg);
+}
+
+static int wm8961_set_clkdiv(struct snd_soc_dai *dai, int div_id, int div)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ u16 reg;
+
+ switch (div_id) {
+ case WM8961_BCLK:
+ reg = snd_soc_read(codec, WM8961_CLOCKING2);
+ reg &= ~WM8961_BCLKDIV_MASK;
+ reg |= div;
+ snd_soc_write(codec, WM8961_CLOCKING2, reg);
+ break;
+
+ case WM8961_LRCLK:
+ reg = snd_soc_read(codec, WM8961_AUDIO_INTERFACE_2);
+ reg &= ~WM8961_LRCLK_RATE_MASK;
+ reg |= div;
+ snd_soc_write(codec, WM8961_AUDIO_INTERFACE_2, reg);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int wm8961_set_bias_level(struct snd_soc_codec *codec,
+ enum snd_soc_bias_level level)
+{
+ u16 reg;
+
+ /* This is all slightly unusual since we have no bypass paths
+ * and the output amplifier structure means we can just slam
+ * the biases straight up rather than having to ramp them
+ * slowly.
+ */
+ switch (level) {
+ case SND_SOC_BIAS_ON:
+ break;
+
+ case SND_SOC_BIAS_PREPARE:
+ if (codec->bias_level == SND_SOC_BIAS_STANDBY) {
+ /* Enable bias generation */
+ reg = snd_soc_read(codec, WM8961_ANTI_POP);
+ reg |= WM8961_BUFIOEN | WM8961_BUFDCOPEN;
+ snd_soc_write(codec, WM8961_ANTI_POP, reg);
+
+ /* VMID=2*50k, VREF */
+ reg = snd_soc_read(codec, WM8961_PWR_MGMT_1);
+ reg &= ~WM8961_VMIDSEL_MASK;
+ reg |= (1 << WM8961_VMIDSEL_SHIFT) | WM8961_VREF;
+ snd_soc_write(codec, WM8961_PWR_MGMT_1, reg);
+ }
+ break;
+
+ case SND_SOC_BIAS_STANDBY:
+ if (codec->bias_level == SND_SOC_BIAS_PREPARE) {
+ /* VREF off */
+ reg = snd_soc_read(codec, WM8961_PWR_MGMT_1);
+ reg &= ~WM8961_VREF;
+ snd_soc_write(codec, WM8961_PWR_MGMT_1, reg);
+
+ /* Bias generation off */
+ reg = snd_soc_read(codec, WM8961_ANTI_POP);
+ reg &= ~(WM8961_BUFIOEN | WM8961_BUFDCOPEN);
+ snd_soc_write(codec, WM8961_ANTI_POP, reg);
+
+ /* VMID off */
+ reg = snd_soc_read(codec, WM8961_PWR_MGMT_1);
+ reg &= ~WM8961_VMIDSEL_MASK;
+ snd_soc_write(codec, WM8961_PWR_MGMT_1, reg);
+ }
+ break;
+
+ case SND_SOC_BIAS_OFF:
+ break;
+ }
+
+ codec->bias_level = level;
+
+ return 0;
+}
+
+
+#define WM8961_RATES SNDRV_PCM_RATE_8000_48000
+
+#define WM8961_FORMATS \
+ (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
+ SNDRV_PCM_FMTBIT_S24_LE)
+
+static struct snd_soc_dai_ops wm8961_dai_ops = {
+ .hw_params = wm8961_hw_params,
+ .set_sysclk = wm8961_set_sysclk,
+ .set_fmt = wm8961_set_fmt,
+ .digital_mute = wm8961_digital_mute,
+ .set_tristate = wm8961_set_tristate,
+ .set_clkdiv = wm8961_set_clkdiv,
+};
+
+struct snd_soc_dai wm8961_dai = {
+ .name = "WM8961",
+ .playback = {
+ .stream_name = "HiFi Playback",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = WM8961_RATES,
+ .formats = WM8961_FORMATS,},
+ .capture = {
+ .stream_name = "HiFi Capture",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = WM8961_RATES,
+ .formats = WM8961_FORMATS,},
+ .ops = &wm8961_dai_ops,
+};
+EXPORT_SYMBOL_GPL(wm8961_dai);
+
+
+static struct snd_soc_codec *wm8961_codec;
+
+static int wm8961_probe(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec;
+ int ret = 0;
+
+ if (wm8961_codec == NULL) {
+ dev_err(&pdev->dev, "Codec device not registered\n");
+ return -ENODEV;
+ }
+
+ socdev->card->codec = wm8961_codec;
+ codec = wm8961_codec;
+
+ /* register pcms */
+ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+ if (ret < 0) {
+ dev_err(codec->dev, "failed to create pcms: %d\n", ret);
+ goto pcm_err;
+ }
+
+ snd_soc_add_controls(codec, wm8961_snd_controls,
+ ARRAY_SIZE(wm8961_snd_controls));
+ snd_soc_dapm_new_controls(codec, wm8961_dapm_widgets,
+ ARRAY_SIZE(wm8961_dapm_widgets));
+ snd_soc_dapm_add_routes(codec, audio_paths, ARRAY_SIZE(audio_paths));
+ snd_soc_dapm_new_widgets(codec);
+
+ ret = snd_soc_init_card(socdev);
+ if (ret < 0) {
+ dev_err(codec->dev, "failed to register card: %d\n", ret);
+ goto card_err;
+ }
+
+ return ret;
+
+card_err:
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+pcm_err:
+ return ret;
+}
+
+static int wm8961_remove(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int wm8961_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->card->codec;
+
+ wm8961_set_bias_level(codec, SND_SOC_BIAS_OFF);
+
+ return 0;
+}
+
+static int wm8961_resume(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->card->codec;
+ u16 *reg_cache = codec->reg_cache;
+ int i;
+
+ for (i = 0; i < codec->reg_cache_size; i++) {
+ if (i == WM8961_SOFTWARE_RESET)
+ continue;
+
+ snd_soc_write(codec, i, reg_cache[i]);
+ }
+
+ wm8961_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+ return 0;
+}
+#else
+#define wm8961_suspend NULL
+#define wm8961_resume NULL
+#endif
+
+struct snd_soc_codec_device soc_codec_dev_wm8961 = {
+ .probe = wm8961_probe,
+ .remove = wm8961_remove,
+ .suspend = wm8961_suspend,
+ .resume = wm8961_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm8961);
+
+static int wm8961_register(struct wm8961_priv *wm8961)
+{
+ struct snd_soc_codec *codec = &wm8961->codec;
+ int ret;
+ u16 reg;
+
+ if (wm8961_codec) {
+ dev_err(codec->dev, "Another WM8961 is registered\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ mutex_init(&codec->mutex);
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
+
+ codec->private_data = wm8961;
+ codec->name = "WM8961";
+ codec->owner = THIS_MODULE;
+ codec->dai = &wm8961_dai;
+ codec->num_dai = 1;
+ codec->reg_cache_size = ARRAY_SIZE(wm8961->reg_cache);
+ codec->reg_cache = &wm8961->reg_cache;
+ codec->bias_level = SND_SOC_BIAS_OFF;
+ codec->set_bias_level = wm8961_set_bias_level;
+ codec->volatile_register = wm8961_volatile_register;
+
+ memcpy(codec->reg_cache, wm8961_reg_defaults,
+ sizeof(wm8961_reg_defaults));
+
+ ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_I2C);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+ goto err;
+ }
+
+ reg = snd_soc_read(codec, WM8961_SOFTWARE_RESET);
+ if (reg != 0x1801) {
+ dev_err(codec->dev, "Device is not a WM8961: ID=0x%x\n", reg);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ /* This isn't volatile - readback doesn't correspond to write */
+ reg = codec->hw_read(codec, WM8961_RIGHT_INPUT_VOLUME);
+ dev_info(codec->dev, "WM8961 family %d revision %c\n",
+ (reg & WM8961_DEVICE_ID_MASK) >> WM8961_DEVICE_ID_SHIFT,
+ ((reg & WM8961_CHIP_REV_MASK) >> WM8961_CHIP_REV_SHIFT)
+ + 'A');
+
+ ret = wm8961_reset(codec);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to issue reset\n");
+ return ret;
+ }
+
+ /* Enable class W */
+ reg = snd_soc_read(codec, WM8961_CHARGE_PUMP_B);
+ reg |= WM8961_CP_DYN_PWR_MASK;
+ snd_soc_write(codec, WM8961_CHARGE_PUMP_B, reg);
+
+ /* Latch volume update bits (right channel only, we always
+ * write both out) and default ZC on. */
+ reg = snd_soc_read(codec, WM8961_ROUT1_VOLUME);
+ snd_soc_write(codec, WM8961_ROUT1_VOLUME,
+ reg | WM8961_LO1ZC | WM8961_OUT1VU);
+ snd_soc_write(codec, WM8961_LOUT1_VOLUME, reg | WM8961_LO1ZC);
+ reg = snd_soc_read(codec, WM8961_ROUT2_VOLUME);
+ snd_soc_write(codec, WM8961_ROUT2_VOLUME,
+ reg | WM8961_SPKRZC | WM8961_SPKVU);
+ snd_soc_write(codec, WM8961_LOUT2_VOLUME, reg | WM8961_SPKLZC);
+
+ reg = snd_soc_read(codec, WM8961_RIGHT_ADC_VOLUME);
+ snd_soc_write(codec, WM8961_RIGHT_ADC_VOLUME, reg | WM8961_ADCVU);
+ reg = snd_soc_read(codec, WM8961_RIGHT_INPUT_VOLUME);
+ snd_soc_write(codec, WM8961_RIGHT_INPUT_VOLUME, reg | WM8961_IPVU);
+
+ /* Use soft mute by default */
+ reg = snd_soc_read(codec, WM8961_ADC_DAC_CONTROL_2);
+ reg |= WM8961_DACSMM;
+ snd_soc_write(codec, WM8961_ADC_DAC_CONTROL_2, reg);
+
+ /* Use automatic clocking mode by default; for now this is all
+ * we support.
+ */
+ reg = snd_soc_read(codec, WM8961_CLOCKING_3);
+ reg &= ~WM8961_MANUAL_MODE;
+ snd_soc_write(codec, WM8961_CLOCKING_3, reg);
+
+ wm8961_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+ wm8961_dai.dev = codec->dev;
+
+ wm8961_codec = codec;
+
+ ret = snd_soc_register_codec(codec);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+ return ret;
+ }
+
+ ret = snd_soc_register_dai(&wm8961_dai);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
+ snd_soc_unregister_codec(codec);
+ return ret;
+ }
+
+ return 0;
+
+err:
+ kfree(wm8961);
+ return ret;
+}
+
+static void wm8961_unregister(struct wm8961_priv *wm8961)
+{
+ wm8961_set_bias_level(&wm8961->codec, SND_SOC_BIAS_OFF);
+ snd_soc_unregister_dai(&wm8961_dai);
+ snd_soc_unregister_codec(&wm8961->codec);
+ kfree(wm8961);
+ wm8961_codec = NULL;
+}
+
+static __devinit int wm8961_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct wm8961_priv *wm8961;
+ struct snd_soc_codec *codec;
+
+ wm8961 = kzalloc(sizeof(struct wm8961_priv), GFP_KERNEL);
+ if (wm8961 == NULL)
+ return -ENOMEM;
+
+ codec = &wm8961->codec;
+
+ i2c_set_clientdata(i2c, wm8961);
+ codec->control_data = i2c;
+
+ codec->dev = &i2c->dev;
+
+ return wm8961_register(wm8961);
+}
+
+static __devexit int wm8961_i2c_remove(struct i2c_client *client)
+{
+ struct wm8961_priv *wm8961 = i2c_get_clientdata(client);
+ wm8961_unregister(wm8961);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int wm8961_i2c_suspend(struct i2c_client *client, pm_message_t state)
+{
+ return snd_soc_suspend_device(&client->dev);
+}
+
+static int wm8961_i2c_resume(struct i2c_client *client)
+{
+ return snd_soc_resume_device(&client->dev);
+}
+#else
+#define wm8961_i2c_suspend NULL
+#define wm8961_i2c_resume NULL
+#endif
+
+static const struct i2c_device_id wm8961_i2c_id[] = {
+ { "wm8961", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, wm8961_i2c_id);
+
+static struct i2c_driver wm8961_i2c_driver = {
+ .driver = {
+ .name = "wm8961",
+ .owner = THIS_MODULE,
+ },
+ .probe = wm8961_i2c_probe,
+ .remove = __devexit_p(wm8961_i2c_remove),
+ .suspend = wm8961_i2c_suspend,
+ .resume = wm8961_i2c_resume,
+ .id_table = wm8961_i2c_id,
+};
+
+static int __init wm8961_modinit(void)
+{
+ int ret;
+
+ ret = i2c_add_driver(&wm8961_i2c_driver);
+ if (ret != 0) {
+ printk(KERN_ERR "Failed to register WM8961 I2C driver: %d\n",
+ ret);
+ }
+
+ return ret;
+}
+module_init(wm8961_modinit);
+
+static void __exit wm8961_exit(void)
+{
+ i2c_del_driver(&wm8961_i2c_driver);
+}
+module_exit(wm8961_exit);
+
+
+MODULE_DESCRIPTION("ASoC WM8961 driver");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * wm8961.h -- WM8961 Soc Audio driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _WM8961_H
+#define _WM8961_H
+
+#include <sound/soc.h>
+
+extern struct snd_soc_codec_device soc_codec_dev_wm8961;
+extern struct snd_soc_dai wm8961_dai;
+
+#define WM8961_BCLK 1
+#define WM8961_LRCLK 2
+
+#define WM8961_BCLK_DIV_1 0
+#define WM8961_BCLK_DIV_1_5 1
+#define WM8961_BCLK_DIV_2 2
+#define WM8961_BCLK_DIV_3 3
+#define WM8961_BCLK_DIV_4 4
+#define WM8961_BCLK_DIV_5_5 5
+#define WM8961_BCLK_DIV_6 6
+#define WM8961_BCLK_DIV_8 7
+#define WM8961_BCLK_DIV_11 8
+#define WM8961_BCLK_DIV_12 9
+#define WM8961_BCLK_DIV_16 10
+#define WM8961_BCLK_DIV_24 11
+#define WM8961_BCLK_DIV_32 13
+
+
+/*
+ * Register values.
+ */
+#define WM8961_LEFT_INPUT_VOLUME 0x00
+#define WM8961_RIGHT_INPUT_VOLUME 0x01
+#define WM8961_LOUT1_VOLUME 0x02
+#define WM8961_ROUT1_VOLUME 0x03
+#define WM8961_CLOCKING1 0x04
+#define WM8961_ADC_DAC_CONTROL_1 0x05
+#define WM8961_ADC_DAC_CONTROL_2 0x06
+#define WM8961_AUDIO_INTERFACE_0 0x07
+#define WM8961_CLOCKING2 0x08
+#define WM8961_AUDIO_INTERFACE_1 0x09
+#define WM8961_LEFT_DAC_VOLUME 0x0A
+#define WM8961_RIGHT_DAC_VOLUME 0x0B
+#define WM8961_AUDIO_INTERFACE_2 0x0E
+#define WM8961_SOFTWARE_RESET 0x0F
+#define WM8961_ALC1 0x11
+#define WM8961_ALC2 0x12
+#define WM8961_ALC3 0x13
+#define WM8961_NOISE_GATE 0x14
+#define WM8961_LEFT_ADC_VOLUME 0x15
+#define WM8961_RIGHT_ADC_VOLUME 0x16
+#define WM8961_ADDITIONAL_CONTROL_1 0x17
+#define WM8961_ADDITIONAL_CONTROL_2 0x18
+#define WM8961_PWR_MGMT_1 0x19
+#define WM8961_PWR_MGMT_2 0x1A
+#define WM8961_ADDITIONAL_CONTROL_3 0x1B
+#define WM8961_ANTI_POP 0x1C
+#define WM8961_CLOCKING_3 0x1E
+#define WM8961_ADCL_SIGNAL_PATH 0x20
+#define WM8961_ADCR_SIGNAL_PATH 0x21
+#define WM8961_LOUT2_VOLUME 0x28
+#define WM8961_ROUT2_VOLUME 0x29
+#define WM8961_PWR_MGMT_3 0x2F
+#define WM8961_ADDITIONAL_CONTROL_4 0x30
+#define WM8961_CLASS_D_CONTROL_1 0x31
+#define WM8961_CLASS_D_CONTROL_2 0x33
+#define WM8961_CLOCKING_4 0x38
+#define WM8961_DSP_SIDETONE_0 0x39
+#define WM8961_DSP_SIDETONE_1 0x3A
+#define WM8961_DC_SERVO_0 0x3C
+#define WM8961_DC_SERVO_1 0x3D
+#define WM8961_DC_SERVO_3 0x3F
+#define WM8961_DC_SERVO_5 0x41
+#define WM8961_ANALOGUE_PGA_BIAS 0x44
+#define WM8961_ANALOGUE_HP_0 0x45
+#define WM8961_ANALOGUE_HP_2 0x47
+#define WM8961_CHARGE_PUMP_1 0x48
+#define WM8961_CHARGE_PUMP_B 0x52
+#define WM8961_WRITE_SEQUENCER_1 0x57
+#define WM8961_WRITE_SEQUENCER_2 0x58
+#define WM8961_WRITE_SEQUENCER_3 0x59
+#define WM8961_WRITE_SEQUENCER_4 0x5A
+#define WM8961_WRITE_SEQUENCER_5 0x5B
+#define WM8961_WRITE_SEQUENCER_6 0x5C
+#define WM8961_WRITE_SEQUENCER_7 0x5D
+#define WM8961_GENERAL_TEST_1 0xFC
+
+
+/*
+ * Field Definitions.
+ */
+
+/*
+ * R0 (0x00) - Left Input volume
+ */
+#define WM8961_IPVU 0x0100 /* IPVU */
+#define WM8961_IPVU_MASK 0x0100 /* IPVU */
+#define WM8961_IPVU_SHIFT 8 /* IPVU */
+#define WM8961_IPVU_WIDTH 1 /* IPVU */
+#define WM8961_LINMUTE 0x0080 /* LINMUTE */
+#define WM8961_LINMUTE_MASK 0x0080 /* LINMUTE */
+#define WM8961_LINMUTE_SHIFT 7 /* LINMUTE */
+#define WM8961_LINMUTE_WIDTH 1 /* LINMUTE */
+#define WM8961_LIZC 0x0040 /* LIZC */
+#define WM8961_LIZC_MASK 0x0040 /* LIZC */
+#define WM8961_LIZC_SHIFT 6 /* LIZC */
+#define WM8961_LIZC_WIDTH 1 /* LIZC */
+#define WM8961_LINVOL_MASK 0x003F /* LINVOL - [5:0] */
+#define WM8961_LINVOL_SHIFT 0 /* LINVOL - [5:0] */
+#define WM8961_LINVOL_WIDTH 6 /* LINVOL - [5:0] */
+
+/*
+ * R1 (0x01) - Right Input volume
+ */
+#define WM8961_DEVICE_ID_MASK 0xF000 /* DEVICE_ID - [15:12] */
+#define WM8961_DEVICE_ID_SHIFT 12 /* DEVICE_ID - [15:12] */
+#define WM8961_DEVICE_ID_WIDTH 4 /* DEVICE_ID - [15:12] */
+#define WM8961_CHIP_REV_MASK 0x0E00 /* CHIP_REV - [11:9] */
+#define WM8961_CHIP_REV_SHIFT 9 /* CHIP_REV - [11:9] */
+#define WM8961_CHIP_REV_WIDTH 3 /* CHIP_REV - [11:9] */
+#define WM8961_IPVU 0x0100 /* IPVU */
+#define WM8961_IPVU_MASK 0x0100 /* IPVU */
+#define WM8961_IPVU_SHIFT 8 /* IPVU */
+#define WM8961_IPVU_WIDTH 1 /* IPVU */
+#define WM8961_RINMUTE 0x0080 /* RINMUTE */
+#define WM8961_RINMUTE_MASK 0x0080 /* RINMUTE */
+#define WM8961_RINMUTE_SHIFT 7 /* RINMUTE */
+#define WM8961_RINMUTE_WIDTH 1 /* RINMUTE */
+#define WM8961_RIZC 0x0040 /* RIZC */
+#define WM8961_RIZC_MASK 0x0040 /* RIZC */
+#define WM8961_RIZC_SHIFT 6 /* RIZC */
+#define WM8961_RIZC_WIDTH 1 /* RIZC */
+#define WM8961_RINVOL_MASK 0x003F /* RINVOL - [5:0] */
+#define WM8961_RINVOL_SHIFT 0 /* RINVOL - [5:0] */
+#define WM8961_RINVOL_WIDTH 6 /* RINVOL - [5:0] */
+
+/*
+ * R2 (0x02) - LOUT1 volume
+ */
+#define WM8961_OUT1VU 0x0100 /* OUT1VU */
+#define WM8961_OUT1VU_MASK 0x0100 /* OUT1VU */
+#define WM8961_OUT1VU_SHIFT 8 /* OUT1VU */
+#define WM8961_OUT1VU_WIDTH 1 /* OUT1VU */
+#define WM8961_LO1ZC 0x0080 /* LO1ZC */
+#define WM8961_LO1ZC_MASK 0x0080 /* LO1ZC */
+#define WM8961_LO1ZC_SHIFT 7 /* LO1ZC */
+#define WM8961_LO1ZC_WIDTH 1 /* LO1ZC */
+#define WM8961_LOUT1VOL_MASK 0x007F /* LOUT1VOL - [6:0] */
+#define WM8961_LOUT1VOL_SHIFT 0 /* LOUT1VOL - [6:0] */
+#define WM8961_LOUT1VOL_WIDTH 7 /* LOUT1VOL - [6:0] */
+
+/*
+ * R3 (0x03) - ROUT1 volume
+ */
+#define WM8961_OUT1VU 0x0100 /* OUT1VU */
+#define WM8961_OUT1VU_MASK 0x0100 /* OUT1VU */
+#define WM8961_OUT1VU_SHIFT 8 /* OUT1VU */
+#define WM8961_OUT1VU_WIDTH 1 /* OUT1VU */
+#define WM8961_RO1ZC 0x0080 /* RO1ZC */
+#define WM8961_RO1ZC_MASK 0x0080 /* RO1ZC */
+#define WM8961_RO1ZC_SHIFT 7 /* RO1ZC */
+#define WM8961_RO1ZC_WIDTH 1 /* RO1ZC */
+#define WM8961_ROUT1VOL_MASK 0x007F /* ROUT1VOL - [6:0] */
+#define WM8961_ROUT1VOL_SHIFT 0 /* ROUT1VOL - [6:0] */
+#define WM8961_ROUT1VOL_WIDTH 7 /* ROUT1VOL - [6:0] */
+
+/*
+ * R4 (0x04) - Clocking1
+ */
+#define WM8961_ADCDIV_MASK 0x01C0 /* ADCDIV - [8:6] */
+#define WM8961_ADCDIV_SHIFT 6 /* ADCDIV - [8:6] */
+#define WM8961_ADCDIV_WIDTH 3 /* ADCDIV - [8:6] */
+#define WM8961_DACDIV_MASK 0x0038 /* DACDIV - [5:3] */
+#define WM8961_DACDIV_SHIFT 3 /* DACDIV - [5:3] */
+#define WM8961_DACDIV_WIDTH 3 /* DACDIV - [5:3] */
+#define WM8961_MCLKDIV 0x0004 /* MCLKDIV */
+#define WM8961_MCLKDIV_MASK 0x0004 /* MCLKDIV */
+#define WM8961_MCLKDIV_SHIFT 2 /* MCLKDIV */
+#define WM8961_MCLKDIV_WIDTH 1 /* MCLKDIV */
+
+/*
+ * R5 (0x05) - ADC & DAC Control 1
+ */
+#define WM8961_ADCPOL_MASK 0x0060 /* ADCPOL - [6:5] */
+#define WM8961_ADCPOL_SHIFT 5 /* ADCPOL - [6:5] */
+#define WM8961_ADCPOL_WIDTH 2 /* ADCPOL - [6:5] */
+#define WM8961_DACMU 0x0008 /* DACMU */
+#define WM8961_DACMU_MASK 0x0008 /* DACMU */
+#define WM8961_DACMU_SHIFT 3 /* DACMU */
+#define WM8961_DACMU_WIDTH 1 /* DACMU */
+#define WM8961_DEEMPH_MASK 0x0006 /* DEEMPH - [2:1] */
+#define WM8961_DEEMPH_SHIFT 1 /* DEEMPH - [2:1] */
+#define WM8961_DEEMPH_WIDTH 2 /* DEEMPH - [2:1] */
+#define WM8961_ADCHPD 0x0001 /* ADCHPD */
+#define WM8961_ADCHPD_MASK 0x0001 /* ADCHPD */
+#define WM8961_ADCHPD_SHIFT 0 /* ADCHPD */
+#define WM8961_ADCHPD_WIDTH 1 /* ADCHPD */
+
+/*
+ * R6 (0x06) - ADC & DAC Control 2
+ */
+#define WM8961_ADC_HPF_CUT_MASK 0x0180 /* ADC_HPF_CUT - [8:7] */
+#define WM8961_ADC_HPF_CUT_SHIFT 7 /* ADC_HPF_CUT - [8:7] */
+#define WM8961_ADC_HPF_CUT_WIDTH 2 /* ADC_HPF_CUT - [8:7] */
+#define WM8961_DACPOL_MASK 0x0060 /* DACPOL - [6:5] */
+#define WM8961_DACPOL_SHIFT 5 /* DACPOL - [6:5] */
+#define WM8961_DACPOL_WIDTH 2 /* DACPOL - [6:5] */
+#define WM8961_DACSMM 0x0008 /* DACSMM */
+#define WM8961_DACSMM_MASK 0x0008 /* DACSMM */
+#define WM8961_DACSMM_SHIFT 3 /* DACSMM */
+#define WM8961_DACSMM_WIDTH 1 /* DACSMM */
+#define WM8961_DACMR 0x0004 /* DACMR */
+#define WM8961_DACMR_MASK 0x0004 /* DACMR */
+#define WM8961_DACMR_SHIFT 2 /* DACMR */
+#define WM8961_DACMR_WIDTH 1 /* DACMR */
+#define WM8961_DACSLOPE 0x0002 /* DACSLOPE */
+#define WM8961_DACSLOPE_MASK 0x0002 /* DACSLOPE */
+#define WM8961_DACSLOPE_SHIFT 1 /* DACSLOPE */
+#define WM8961_DACSLOPE_WIDTH 1 /* DACSLOPE */
+#define WM8961_DAC_OSR128 0x0001 /* DAC_OSR128 */
+#define WM8961_DAC_OSR128_MASK 0x0001 /* DAC_OSR128 */
+#define WM8961_DAC_OSR128_SHIFT 0 /* DAC_OSR128 */
+#define WM8961_DAC_OSR128_WIDTH 1 /* DAC_OSR128 */
+
+/*
+ * R7 (0x07) - Audio Interface 0
+ */
+#define WM8961_ALRSWAP 0x0100 /* ALRSWAP */
+#define WM8961_ALRSWAP_MASK 0x0100 /* ALRSWAP */
+#define WM8961_ALRSWAP_SHIFT 8 /* ALRSWAP */
+#define WM8961_ALRSWAP_WIDTH 1 /* ALRSWAP */
+#define WM8961_BCLKINV 0x0080 /* BCLKINV */
+#define WM8961_BCLKINV_MASK 0x0080 /* BCLKINV */
+#define WM8961_BCLKINV_SHIFT 7 /* BCLKINV */
+#define WM8961_BCLKINV_WIDTH 1 /* BCLKINV */
+#define WM8961_MS 0x0040 /* MS */
+#define WM8961_MS_MASK 0x0040 /* MS */
+#define WM8961_MS_SHIFT 6 /* MS */
+#define WM8961_MS_WIDTH 1 /* MS */
+#define WM8961_DLRSWAP 0x0020 /* DLRSWAP */
+#define WM8961_DLRSWAP_MASK 0x0020 /* DLRSWAP */
+#define WM8961_DLRSWAP_SHIFT 5 /* DLRSWAP */
+#define WM8961_DLRSWAP_WIDTH 1 /* DLRSWAP */
+#define WM8961_LRP 0x0010 /* LRP */
+#define WM8961_LRP_MASK 0x0010 /* LRP */
+#define WM8961_LRP_SHIFT 4 /* LRP */
+#define WM8961_LRP_WIDTH 1 /* LRP */
+#define WM8961_WL_MASK 0x000C /* WL - [3:2] */
+#define WM8961_WL_SHIFT 2 /* WL - [3:2] */
+#define WM8961_WL_WIDTH 2 /* WL - [3:2] */
+#define WM8961_FORMAT_MASK 0x0003 /* FORMAT - [1:0] */
+#define WM8961_FORMAT_SHIFT 0 /* FORMAT - [1:0] */
+#define WM8961_FORMAT_WIDTH 2 /* FORMAT - [1:0] */
+
+/*
+ * R8 (0x08) - Clocking2
+ */
+#define WM8961_DCLKDIV_MASK 0x01C0 /* DCLKDIV - [8:6] */
+#define WM8961_DCLKDIV_SHIFT 6 /* DCLKDIV - [8:6] */
+#define WM8961_DCLKDIV_WIDTH 3 /* DCLKDIV - [8:6] */
+#define WM8961_CLK_SYS_ENA 0x0020 /* CLK_SYS_ENA */
+#define WM8961_CLK_SYS_ENA_MASK 0x0020 /* CLK_SYS_ENA */
+#define WM8961_CLK_SYS_ENA_SHIFT 5 /* CLK_SYS_ENA */
+#define WM8961_CLK_SYS_ENA_WIDTH 1 /* CLK_SYS_ENA */
+#define WM8961_CLK_DSP_ENA 0x0010 /* CLK_DSP_ENA */
+#define WM8961_CLK_DSP_ENA_MASK 0x0010 /* CLK_DSP_ENA */
+#define WM8961_CLK_DSP_ENA_SHIFT 4 /* CLK_DSP_ENA */
+#define WM8961_CLK_DSP_ENA_WIDTH 1 /* CLK_DSP_ENA */
+#define WM8961_BCLKDIV_MASK 0x000F /* BCLKDIV - [3:0] */
+#define WM8961_BCLKDIV_SHIFT 0 /* BCLKDIV - [3:0] */
+#define WM8961_BCLKDIV_WIDTH 4 /* BCLKDIV - [3:0] */
+
+/*
+ * R9 (0x09) - Audio Interface 1
+ */
+#define WM8961_DACCOMP_MASK 0x0018 /* DACCOMP - [4:3] */
+#define WM8961_DACCOMP_SHIFT 3 /* DACCOMP - [4:3] */
+#define WM8961_DACCOMP_WIDTH 2 /* DACCOMP - [4:3] */
+#define WM8961_ADCCOMP_MASK 0x0006 /* ADCCOMP - [2:1] */
+#define WM8961_ADCCOMP_SHIFT 1 /* ADCCOMP - [2:1] */
+#define WM8961_ADCCOMP_WIDTH 2 /* ADCCOMP - [2:1] */
+#define WM8961_LOOPBACK 0x0001 /* LOOPBACK */
+#define WM8961_LOOPBACK_MASK 0x0001 /* LOOPBACK */
+#define WM8961_LOOPBACK_SHIFT 0 /* LOOPBACK */
+#define WM8961_LOOPBACK_WIDTH 1 /* LOOPBACK */
+
+/*
+ * R10 (0x0A) - Left DAC volume
+ */
+#define WM8961_DACVU 0x0100 /* DACVU */
+#define WM8961_DACVU_MASK 0x0100 /* DACVU */
+#define WM8961_DACVU_SHIFT 8 /* DACVU */
+#define WM8961_DACVU_WIDTH 1 /* DACVU */
+#define WM8961_LDACVOL_MASK 0x00FF /* LDACVOL - [7:0] */
+#define WM8961_LDACVOL_SHIFT 0 /* LDACVOL - [7:0] */
+#define WM8961_LDACVOL_WIDTH 8 /* LDACVOL - [7:0] */
+
+/*
+ * R11 (0x0B) - Right DAC volume
+ */
+#define WM8961_DACVU 0x0100 /* DACVU */
+#define WM8961_DACVU_MASK 0x0100 /* DACVU */
+#define WM8961_DACVU_SHIFT 8 /* DACVU */
+#define WM8961_DACVU_WIDTH 1 /* DACVU */
+#define WM8961_RDACVOL_MASK 0x00FF /* RDACVOL - [7:0] */
+#define WM8961_RDACVOL_SHIFT 0 /* RDACVOL - [7:0] */
+#define WM8961_RDACVOL_WIDTH 8 /* RDACVOL - [7:0] */
+
+/*
+ * R14 (0x0E) - Audio Interface 2
+ */
+#define WM8961_LRCLK_RATE_MASK 0x01FF /* LRCLK_RATE - [8:0] */
+#define WM8961_LRCLK_RATE_SHIFT 0 /* LRCLK_RATE - [8:0] */
+#define WM8961_LRCLK_RATE_WIDTH 9 /* LRCLK_RATE - [8:0] */
+
+/*
+ * R15 (0x0F) - Software Reset
+ */
+#define WM8961_SW_RST_DEV_ID1_MASK 0xFFFF /* SW_RST_DEV_ID1 - [15:0] */
+#define WM8961_SW_RST_DEV_ID1_SHIFT 0 /* SW_RST_DEV_ID1 - [15:0] */
+#define WM8961_SW_RST_DEV_ID1_WIDTH 16 /* SW_RST_DEV_ID1 - [15:0] */
+
+/*
+ * R17 (0x11) - ALC1
+ */
+#define WM8961_ALCSEL_MASK 0x0180 /* ALCSEL - [8:7] */
+#define WM8961_ALCSEL_SHIFT 7 /* ALCSEL - [8:7] */
+#define WM8961_ALCSEL_WIDTH 2 /* ALCSEL - [8:7] */
+#define WM8961_MAXGAIN_MASK 0x0070 /* MAXGAIN - [6:4] */
+#define WM8961_MAXGAIN_SHIFT 4 /* MAXGAIN - [6:4] */
+#define WM8961_MAXGAIN_WIDTH 3 /* MAXGAIN - [6:4] */
+#define WM8961_ALCL_MASK 0x000F /* ALCL - [3:0] */
+#define WM8961_ALCL_SHIFT 0 /* ALCL - [3:0] */
+#define WM8961_ALCL_WIDTH 4 /* ALCL - [3:0] */
+
+/*
+ * R18 (0x12) - ALC2
+ */
+#define WM8961_ALCZC 0x0080 /* ALCZC */
+#define WM8961_ALCZC_MASK 0x0080 /* ALCZC */
+#define WM8961_ALCZC_SHIFT 7 /* ALCZC */
+#define WM8961_ALCZC_WIDTH 1 /* ALCZC */
+#define WM8961_MINGAIN_MASK 0x0070 /* MINGAIN - [6:4] */
+#define WM8961_MINGAIN_SHIFT 4 /* MINGAIN - [6:4] */
+#define WM8961_MINGAIN_WIDTH 3 /* MINGAIN - [6:4] */
+#define WM8961_HLD_MASK 0x000F /* HLD - [3:0] */
+#define WM8961_HLD_SHIFT 0 /* HLD - [3:0] */
+#define WM8961_HLD_WIDTH 4 /* HLD - [3:0] */
+
+/*
+ * R19 (0x13) - ALC3
+ */
+#define WM8961_ALCMODE 0x0100 /* ALCMODE */
+#define WM8961_ALCMODE_MASK 0x0100 /* ALCMODE */
+#define WM8961_ALCMODE_SHIFT 8 /* ALCMODE */
+#define WM8961_ALCMODE_WIDTH 1 /* ALCMODE */
+#define WM8961_DCY_MASK 0x00F0 /* DCY - [7:4] */
+#define WM8961_DCY_SHIFT 4 /* DCY - [7:4] */
+#define WM8961_DCY_WIDTH 4 /* DCY - [7:4] */
+#define WM8961_ATK_MASK 0x000F /* ATK - [3:0] */
+#define WM8961_ATK_SHIFT 0 /* ATK - [3:0] */
+#define WM8961_ATK_WIDTH 4 /* ATK - [3:0] */
+
+/*
+ * R20 (0x14) - Noise Gate
+ */
+#define WM8961_NGTH_MASK 0x00F8 /* NGTH - [7:3] */
+#define WM8961_NGTH_SHIFT 3 /* NGTH - [7:3] */
+#define WM8961_NGTH_WIDTH 5 /* NGTH - [7:3] */
+#define WM8961_NGG 0x0002 /* NGG */
+#define WM8961_NGG_MASK 0x0002 /* NGG */
+#define WM8961_NGG_SHIFT 1 /* NGG */
+#define WM8961_NGG_WIDTH 1 /* NGG */
+#define WM8961_NGAT 0x0001 /* NGAT */
+#define WM8961_NGAT_MASK 0x0001 /* NGAT */
+#define WM8961_NGAT_SHIFT 0 /* NGAT */
+#define WM8961_NGAT_WIDTH 1 /* NGAT */
+
+/*
+ * R21 (0x15) - Left ADC volume
+ */
+#define WM8961_ADCVU 0x0100 /* ADCVU */
+#define WM8961_ADCVU_MASK 0x0100 /* ADCVU */
+#define WM8961_ADCVU_SHIFT 8 /* ADCVU */
+#define WM8961_ADCVU_WIDTH 1 /* ADCVU */
+#define WM8961_LADCVOL_MASK 0x00FF /* LADCVOL - [7:0] */
+#define WM8961_LADCVOL_SHIFT 0 /* LADCVOL - [7:0] */
+#define WM8961_LADCVOL_WIDTH 8 /* LADCVOL - [7:0] */
+
+/*
+ * R22 (0x16) - Right ADC volume
+ */
+#define WM8961_ADCVU 0x0100 /* ADCVU */
+#define WM8961_ADCVU_MASK 0x0100 /* ADCVU */
+#define WM8961_ADCVU_SHIFT 8 /* ADCVU */
+#define WM8961_ADCVU_WIDTH 1 /* ADCVU */
+#define WM8961_RADCVOL_MASK 0x00FF /* RADCVOL - [7:0] */
+#define WM8961_RADCVOL_SHIFT 0 /* RADCVOL - [7:0] */
+#define WM8961_RADCVOL_WIDTH 8 /* RADCVOL - [7:0] */
+
+/*
+ * R23 (0x17) - Additional control(1)
+ */
+#define WM8961_TSDEN 0x0100 /* TSDEN */
+#define WM8961_TSDEN_MASK 0x0100 /* TSDEN */
+#define WM8961_TSDEN_SHIFT 8 /* TSDEN */
+#define WM8961_TSDEN_WIDTH 1 /* TSDEN */
+#define WM8961_DMONOMIX 0x0010 /* DMONOMIX */
+#define WM8961_DMONOMIX_MASK 0x0010 /* DMONOMIX */
+#define WM8961_DMONOMIX_SHIFT 4 /* DMONOMIX */
+#define WM8961_DMONOMIX_WIDTH 1 /* DMONOMIX */
+#define WM8961_TOEN 0x0001 /* TOEN */
+#define WM8961_TOEN_MASK 0x0001 /* TOEN */
+#define WM8961_TOEN_SHIFT 0 /* TOEN */
+#define WM8961_TOEN_WIDTH 1 /* TOEN */
+
+/*
+ * R24 (0x18) - Additional control(2)
+ */
+#define WM8961_TRIS 0x0008 /* TRIS */
+#define WM8961_TRIS_MASK 0x0008 /* TRIS */
+#define WM8961_TRIS_SHIFT 3 /* TRIS */
+#define WM8961_TRIS_WIDTH 1 /* TRIS */
+
+/*
+ * R25 (0x19) - Pwr Mgmt (1)
+ */
+#define WM8961_VMIDSEL_MASK 0x0180 /* VMIDSEL - [8:7] */
+#define WM8961_VMIDSEL_SHIFT 7 /* VMIDSEL - [8:7] */
+#define WM8961_VMIDSEL_WIDTH 2 /* VMIDSEL - [8:7] */
+#define WM8961_VREF 0x0040 /* VREF */
+#define WM8961_VREF_MASK 0x0040 /* VREF */
+#define WM8961_VREF_SHIFT 6 /* VREF */
+#define WM8961_VREF_WIDTH 1 /* VREF */
+#define WM8961_AINL 0x0020 /* AINL */
+#define WM8961_AINL_MASK 0x0020 /* AINL */
+#define WM8961_AINL_SHIFT 5 /* AINL */
+#define WM8961_AINL_WIDTH 1 /* AINL */
+#define WM8961_AINR 0x0010 /* AINR */
+#define WM8961_AINR_MASK 0x0010 /* AINR */
+#define WM8961_AINR_SHIFT 4 /* AINR */
+#define WM8961_AINR_WIDTH 1 /* AINR */
+#define WM8961_ADCL 0x0008 /* ADCL */
+#define WM8961_ADCL_MASK 0x0008 /* ADCL */
+#define WM8961_ADCL_SHIFT 3 /* ADCL */
+#define WM8961_ADCL_WIDTH 1 /* ADCL */
+#define WM8961_ADCR 0x0004 /* ADCR */
+#define WM8961_ADCR_MASK 0x0004 /* ADCR */
+#define WM8961_ADCR_SHIFT 2 /* ADCR */
+#define WM8961_ADCR_WIDTH 1 /* ADCR */
+#define WM8961_MICB 0x0002 /* MICB */
+#define WM8961_MICB_MASK 0x0002 /* MICB */
+#define WM8961_MICB_SHIFT 1 /* MICB */
+#define WM8961_MICB_WIDTH 1 /* MICB */
+
+/*
+ * R26 (0x1A) - Pwr Mgmt (2)
+ */
+#define WM8961_DACL 0x0100 /* DACL */
+#define WM8961_DACL_MASK 0x0100 /* DACL */
+#define WM8961_DACL_SHIFT 8 /* DACL */
+#define WM8961_DACL_WIDTH 1 /* DACL */
+#define WM8961_DACR 0x0080 /* DACR */
+#define WM8961_DACR_MASK 0x0080 /* DACR */
+#define WM8961_DACR_SHIFT 7 /* DACR */
+#define WM8961_DACR_WIDTH 1 /* DACR */
+#define WM8961_LOUT1_PGA 0x0040 /* LOUT1_PGA */
+#define WM8961_LOUT1_PGA_MASK 0x0040 /* LOUT1_PGA */
+#define WM8961_LOUT1_PGA_SHIFT 6 /* LOUT1_PGA */
+#define WM8961_LOUT1_PGA_WIDTH 1 /* LOUT1_PGA */
+#define WM8961_ROUT1_PGA 0x0020 /* ROUT1_PGA */
+#define WM8961_ROUT1_PGA_MASK 0x0020 /* ROUT1_PGA */
+#define WM8961_ROUT1_PGA_SHIFT 5 /* ROUT1_PGA */
+#define WM8961_ROUT1_PGA_WIDTH 1 /* ROUT1_PGA */
+#define WM8961_SPKL_PGA 0x0010 /* SPKL_PGA */
+#define WM8961_SPKL_PGA_MASK 0x0010 /* SPKL_PGA */
+#define WM8961_SPKL_PGA_SHIFT 4 /* SPKL_PGA */
+#define WM8961_SPKL_PGA_WIDTH 1 /* SPKL_PGA */
+#define WM8961_SPKR_PGA 0x0008 /* SPKR_PGA */
+#define WM8961_SPKR_PGA_MASK 0x0008 /* SPKR_PGA */
+#define WM8961_SPKR_PGA_SHIFT 3 /* SPKR_PGA */
+#define WM8961_SPKR_PGA_WIDTH 1 /* SPKR_PGA */
+
+/*
+ * R27 (0x1B) - Additional Control (3)
+ */
+#define WM8961_SAMPLE_RATE_MASK 0x0007 /* SAMPLE_RATE - [2:0] */
+#define WM8961_SAMPLE_RATE_SHIFT 0 /* SAMPLE_RATE - [2:0] */
+#define WM8961_SAMPLE_RATE_WIDTH 3 /* SAMPLE_RATE - [2:0] */
+
+/*
+ * R28 (0x1C) - Anti-pop
+ */
+#define WM8961_BUFDCOPEN 0x0010 /* BUFDCOPEN */
+#define WM8961_BUFDCOPEN_MASK 0x0010 /* BUFDCOPEN */
+#define WM8961_BUFDCOPEN_SHIFT 4 /* BUFDCOPEN */
+#define WM8961_BUFDCOPEN_WIDTH 1 /* BUFDCOPEN */
+#define WM8961_BUFIOEN 0x0008 /* BUFIOEN */
+#define WM8961_BUFIOEN_MASK 0x0008 /* BUFIOEN */
+#define WM8961_BUFIOEN_SHIFT 3 /* BUFIOEN */
+#define WM8961_BUFIOEN_WIDTH 1 /* BUFIOEN */
+#define WM8961_SOFT_ST 0x0004 /* SOFT_ST */
+#define WM8961_SOFT_ST_MASK 0x0004 /* SOFT_ST */
+#define WM8961_SOFT_ST_SHIFT 2 /* SOFT_ST */
+#define WM8961_SOFT_ST_WIDTH 1 /* SOFT_ST */
+
+/*
+ * R30 (0x1E) - Clocking 3
+ */
+#define WM8961_CLK_TO_DIV_MASK 0x0180 /* CLK_TO_DIV - [8:7] */
+#define WM8961_CLK_TO_DIV_SHIFT 7 /* CLK_TO_DIV - [8:7] */
+#define WM8961_CLK_TO_DIV_WIDTH 2 /* CLK_TO_DIV - [8:7] */
+#define WM8961_CLK_256K_DIV_MASK 0x007E /* CLK_256K_DIV - [6:1] */
+#define WM8961_CLK_256K_DIV_SHIFT 1 /* CLK_256K_DIV - [6:1] */
+#define WM8961_CLK_256K_DIV_WIDTH 6 /* CLK_256K_DIV - [6:1] */
+#define WM8961_MANUAL_MODE 0x0001 /* MANUAL_MODE */
+#define WM8961_MANUAL_MODE_MASK 0x0001 /* MANUAL_MODE */
+#define WM8961_MANUAL_MODE_SHIFT 0 /* MANUAL_MODE */
+#define WM8961_MANUAL_MODE_WIDTH 1 /* MANUAL_MODE */
+
+/*
+ * R32 (0x20) - ADCL signal path
+ */
+#define WM8961_LMICBOOST_MASK 0x0030 /* LMICBOOST - [5:4] */
+#define WM8961_LMICBOOST_SHIFT 4 /* LMICBOOST - [5:4] */
+#define WM8961_LMICBOOST_WIDTH 2 /* LMICBOOST - [5:4] */
+
+/*
+ * R33 (0x21) - ADCR signal path
+ */
+#define WM8961_RMICBOOST_MASK 0x0030 /* RMICBOOST - [5:4] */
+#define WM8961_RMICBOOST_SHIFT 4 /* RMICBOOST - [5:4] */
+#define WM8961_RMICBOOST_WIDTH 2 /* RMICBOOST - [5:4] */
+
+/*
+ * R40 (0x28) - LOUT2 volume
+ */
+#define WM8961_SPKVU 0x0100 /* SPKVU */
+#define WM8961_SPKVU_MASK 0x0100 /* SPKVU */
+#define WM8961_SPKVU_SHIFT 8 /* SPKVU */
+#define WM8961_SPKVU_WIDTH 1 /* SPKVU */
+#define WM8961_SPKLZC 0x0080 /* SPKLZC */
+#define WM8961_SPKLZC_MASK 0x0080 /* SPKLZC */
+#define WM8961_SPKLZC_SHIFT 7 /* SPKLZC */
+#define WM8961_SPKLZC_WIDTH 1 /* SPKLZC */
+#define WM8961_SPKLVOL_MASK 0x007F /* SPKLVOL - [6:0] */
+#define WM8961_SPKLVOL_SHIFT 0 /* SPKLVOL - [6:0] */
+#define WM8961_SPKLVOL_WIDTH 7 /* SPKLVOL - [6:0] */
+
+/*
+ * R41 (0x29) - ROUT2 volume
+ */
+#define WM8961_SPKVU 0x0100 /* SPKVU */
+#define WM8961_SPKVU_MASK 0x0100 /* SPKVU */
+#define WM8961_SPKVU_SHIFT 8 /* SPKVU */
+#define WM8961_SPKVU_WIDTH 1 /* SPKVU */
+#define WM8961_SPKRZC 0x0080 /* SPKRZC */
+#define WM8961_SPKRZC_MASK 0x0080 /* SPKRZC */
+#define WM8961_SPKRZC_SHIFT 7 /* SPKRZC */
+#define WM8961_SPKRZC_WIDTH 1 /* SPKRZC */
+#define WM8961_SPKRVOL_MASK 0x007F /* SPKRVOL - [6:0] */
+#define WM8961_SPKRVOL_SHIFT 0 /* SPKRVOL - [6:0] */
+#define WM8961_SPKRVOL_WIDTH 7 /* SPKRVOL - [6:0] */
+
+/*
+ * R47 (0x2F) - Pwr Mgmt (3)
+ */
+#define WM8961_TEMP_SHUT 0x0002 /* TEMP_SHUT */
+#define WM8961_TEMP_SHUT_MASK 0x0002 /* TEMP_SHUT */
+#define WM8961_TEMP_SHUT_SHIFT 1 /* TEMP_SHUT */
+#define WM8961_TEMP_SHUT_WIDTH 1 /* TEMP_SHUT */
+#define WM8961_TEMP_WARN 0x0001 /* TEMP_WARN */
+#define WM8961_TEMP_WARN_MASK 0x0001 /* TEMP_WARN */
+#define WM8961_TEMP_WARN_SHIFT 0 /* TEMP_WARN */
+#define WM8961_TEMP_WARN_WIDTH 1 /* TEMP_WARN */
+
+/*
+ * R48 (0x30) - Additional Control (4)
+ */
+#define WM8961_TSENSEN 0x0002 /* TSENSEN */
+#define WM8961_TSENSEN_MASK 0x0002 /* TSENSEN */
+#define WM8961_TSENSEN_SHIFT 1 /* TSENSEN */
+#define WM8961_TSENSEN_WIDTH 1 /* TSENSEN */
+#define WM8961_MBSEL 0x0001 /* MBSEL */
+#define WM8961_MBSEL_MASK 0x0001 /* MBSEL */
+#define WM8961_MBSEL_SHIFT 0 /* MBSEL */
+#define WM8961_MBSEL_WIDTH 1 /* MBSEL */
+
+/*
+ * R49 (0x31) - Class D Control 1
+ */
+#define WM8961_SPKR_ENA 0x0080 /* SPKR_ENA */
+#define WM8961_SPKR_ENA_MASK 0x0080 /* SPKR_ENA */
+#define WM8961_SPKR_ENA_SHIFT 7 /* SPKR_ENA */
+#define WM8961_SPKR_ENA_WIDTH 1 /* SPKR_ENA */
+#define WM8961_SPKL_ENA 0x0040 /* SPKL_ENA */
+#define WM8961_SPKL_ENA_MASK 0x0040 /* SPKL_ENA */
+#define WM8961_SPKL_ENA_SHIFT 6 /* SPKL_ENA */
+#define WM8961_SPKL_ENA_WIDTH 1 /* SPKL_ENA */
+
+/*
+ * R51 (0x33) - Class D Control 2
+ */
+#define WM8961_CLASSD_ACGAIN_MASK 0x0007 /* CLASSD_ACGAIN - [2:0] */
+#define WM8961_CLASSD_ACGAIN_SHIFT 0 /* CLASSD_ACGAIN - [2:0] */
+#define WM8961_CLASSD_ACGAIN_WIDTH 3 /* CLASSD_ACGAIN - [2:0] */
+
+/*
+ * R56 (0x38) - Clocking 4
+ */
+#define WM8961_CLK_DCS_DIV_MASK 0x01E0 /* CLK_DCS_DIV - [8:5] */
+#define WM8961_CLK_DCS_DIV_SHIFT 5 /* CLK_DCS_DIV - [8:5] */
+#define WM8961_CLK_DCS_DIV_WIDTH 4 /* CLK_DCS_DIV - [8:5] */
+#define WM8961_CLK_SYS_RATE_MASK 0x001E /* CLK_SYS_RATE - [4:1] */
+#define WM8961_CLK_SYS_RATE_SHIFT 1 /* CLK_SYS_RATE - [4:1] */
+#define WM8961_CLK_SYS_RATE_WIDTH 4 /* CLK_SYS_RATE - [4:1] */
+
+/*
+ * R57 (0x39) - DSP Sidetone 0
+ */
+#define WM8961_ADCR_DAC_SVOL_MASK 0x00F0 /* ADCR_DAC_SVOL - [7:4] */
+#define WM8961_ADCR_DAC_SVOL_SHIFT 4 /* ADCR_DAC_SVOL - [7:4] */
+#define WM8961_ADCR_DAC_SVOL_WIDTH 4 /* ADCR_DAC_SVOL - [7:4] */
+#define WM8961_ADC_TO_DACR_MASK 0x000C /* ADC_TO_DACR - [3:2] */
+#define WM8961_ADC_TO_DACR_SHIFT 2 /* ADC_TO_DACR - [3:2] */
+#define WM8961_ADC_TO_DACR_WIDTH 2 /* ADC_TO_DACR - [3:2] */
+
+/*
+ * R58 (0x3A) - DSP Sidetone 1
+ */
+#define WM8961_ADCL_DAC_SVOL_MASK 0x00F0 /* ADCL_DAC_SVOL - [7:4] */
+#define WM8961_ADCL_DAC_SVOL_SHIFT 4 /* ADCL_DAC_SVOL - [7:4] */
+#define WM8961_ADCL_DAC_SVOL_WIDTH 4 /* ADCL_DAC_SVOL - [7:4] */
+#define WM8961_ADC_TO_DACL_MASK 0x000C /* ADC_TO_DACL - [3:2] */
+#define WM8961_ADC_TO_DACL_SHIFT 2 /* ADC_TO_DACL - [3:2] */
+#define WM8961_ADC_TO_DACL_WIDTH 2 /* ADC_TO_DACL - [3:2] */
+
+/*
+ * R60 (0x3C) - DC Servo 0
+ */
+#define WM8961_DCS_ENA_CHAN_INL 0x0080 /* DCS_ENA_CHAN_INL */
+#define WM8961_DCS_ENA_CHAN_INL_MASK 0x0080 /* DCS_ENA_CHAN_INL */
+#define WM8961_DCS_ENA_CHAN_INL_SHIFT 7 /* DCS_ENA_CHAN_INL */
+#define WM8961_DCS_ENA_CHAN_INL_WIDTH 1 /* DCS_ENA_CHAN_INL */
+#define WM8961_DCS_TRIG_STARTUP_INL 0x0040 /* DCS_TRIG_STARTUP_INL */
+#define WM8961_DCS_TRIG_STARTUP_INL_MASK 0x0040 /* DCS_TRIG_STARTUP_INL */
+#define WM8961_DCS_TRIG_STARTUP_INL_SHIFT 6 /* DCS_TRIG_STARTUP_INL */
+#define WM8961_DCS_TRIG_STARTUP_INL_WIDTH 1 /* DCS_TRIG_STARTUP_INL */
+#define WM8961_DCS_TRIG_SERIES_INL 0x0010 /* DCS_TRIG_SERIES_INL */
+#define WM8961_DCS_TRIG_SERIES_INL_MASK 0x0010 /* DCS_TRIG_SERIES_INL */
+#define WM8961_DCS_TRIG_SERIES_INL_SHIFT 4 /* DCS_TRIG_SERIES_INL */
+#define WM8961_DCS_TRIG_SERIES_INL_WIDTH 1 /* DCS_TRIG_SERIES_INL */
+#define WM8961_DCS_ENA_CHAN_INR 0x0008 /* DCS_ENA_CHAN_INR */
+#define WM8961_DCS_ENA_CHAN_INR_MASK 0x0008 /* DCS_ENA_CHAN_INR */
+#define WM8961_DCS_ENA_CHAN_INR_SHIFT 3 /* DCS_ENA_CHAN_INR */
+#define WM8961_DCS_ENA_CHAN_INR_WIDTH 1 /* DCS_ENA_CHAN_INR */
+#define WM8961_DCS_TRIG_STARTUP_INR 0x0004 /* DCS_TRIG_STARTUP_INR */
+#define WM8961_DCS_TRIG_STARTUP_INR_MASK 0x0004 /* DCS_TRIG_STARTUP_INR */
+#define WM8961_DCS_TRIG_STARTUP_INR_SHIFT 2 /* DCS_TRIG_STARTUP_INR */
+#define WM8961_DCS_TRIG_STARTUP_INR_WIDTH 1 /* DCS_TRIG_STARTUP_INR */
+#define WM8961_DCS_TRIG_SERIES_INR 0x0001 /* DCS_TRIG_SERIES_INR */
+#define WM8961_DCS_TRIG_SERIES_INR_MASK 0x0001 /* DCS_TRIG_SERIES_INR */
+#define WM8961_DCS_TRIG_SERIES_INR_SHIFT 0 /* DCS_TRIG_SERIES_INR */
+#define WM8961_DCS_TRIG_SERIES_INR_WIDTH 1 /* DCS_TRIG_SERIES_INR */
+
+/*
+ * R61 (0x3D) - DC Servo 1
+ */
+#define WM8961_DCS_ENA_CHAN_HPL 0x0080 /* DCS_ENA_CHAN_HPL */
+#define WM8961_DCS_ENA_CHAN_HPL_MASK 0x0080 /* DCS_ENA_CHAN_HPL */
+#define WM8961_DCS_ENA_CHAN_HPL_SHIFT 7 /* DCS_ENA_CHAN_HPL */
+#define WM8961_DCS_ENA_CHAN_HPL_WIDTH 1 /* DCS_ENA_CHAN_HPL */
+#define WM8961_DCS_TRIG_STARTUP_HPL 0x0040 /* DCS_TRIG_STARTUP_HPL */
+#define WM8961_DCS_TRIG_STARTUP_HPL_MASK 0x0040 /* DCS_TRIG_STARTUP_HPL */
+#define WM8961_DCS_TRIG_STARTUP_HPL_SHIFT 6 /* DCS_TRIG_STARTUP_HPL */
+#define WM8961_DCS_TRIG_STARTUP_HPL_WIDTH 1 /* DCS_TRIG_STARTUP_HPL */
+#define WM8961_DCS_TRIG_SERIES_HPL 0x0010 /* DCS_TRIG_SERIES_HPL */
+#define WM8961_DCS_TRIG_SERIES_HPL_MASK 0x0010 /* DCS_TRIG_SERIES_HPL */
+#define WM8961_DCS_TRIG_SERIES_HPL_SHIFT 4 /* DCS_TRIG_SERIES_HPL */
+#define WM8961_DCS_TRIG_SERIES_HPL_WIDTH 1 /* DCS_TRIG_SERIES_HPL */
+#define WM8961_DCS_ENA_CHAN_HPR 0x0008 /* DCS_ENA_CHAN_HPR */
+#define WM8961_DCS_ENA_CHAN_HPR_MASK 0x0008 /* DCS_ENA_CHAN_HPR */
+#define WM8961_DCS_ENA_CHAN_HPR_SHIFT 3 /* DCS_ENA_CHAN_HPR */
+#define WM8961_DCS_ENA_CHAN_HPR_WIDTH 1 /* DCS_ENA_CHAN_HPR */
+#define WM8961_DCS_TRIG_STARTUP_HPR 0x0004 /* DCS_TRIG_STARTUP_HPR */
+#define WM8961_DCS_TRIG_STARTUP_HPR_MASK 0x0004 /* DCS_TRIG_STARTUP_HPR */
+#define WM8961_DCS_TRIG_STARTUP_HPR_SHIFT 2 /* DCS_TRIG_STARTUP_HPR */
+#define WM8961_DCS_TRIG_STARTUP_HPR_WIDTH 1 /* DCS_TRIG_STARTUP_HPR */
+#define WM8961_DCS_TRIG_SERIES_HPR 0x0001 /* DCS_TRIG_SERIES_HPR */
+#define WM8961_DCS_TRIG_SERIES_HPR_MASK 0x0001 /* DCS_TRIG_SERIES_HPR */
+#define WM8961_DCS_TRIG_SERIES_HPR_SHIFT 0 /* DCS_TRIG_SERIES_HPR */
+#define WM8961_DCS_TRIG_SERIES_HPR_WIDTH 1 /* DCS_TRIG_SERIES_HPR */
+
+/*
+ * R63 (0x3F) - DC Servo 3
+ */
+#define WM8961_DCS_FILT_BW_SERIES_MASK 0x0030 /* DCS_FILT_BW_SERIES - [5:4] */
+#define WM8961_DCS_FILT_BW_SERIES_SHIFT 4 /* DCS_FILT_BW_SERIES - [5:4] */
+#define WM8961_DCS_FILT_BW_SERIES_WIDTH 2 /* DCS_FILT_BW_SERIES - [5:4] */
+
+/*
+ * R65 (0x41) - DC Servo 5
+ */
+#define WM8961_DCS_SERIES_NO_HP_MASK 0x007F /* DCS_SERIES_NO_HP - [6:0] */
+#define WM8961_DCS_SERIES_NO_HP_SHIFT 0 /* DCS_SERIES_NO_HP - [6:0] */
+#define WM8961_DCS_SERIES_NO_HP_WIDTH 7 /* DCS_SERIES_NO_HP - [6:0] */
+
+/*
+ * R68 (0x44) - Analogue PGA Bias
+ */
+#define WM8961_HP_PGAS_BIAS_MASK 0x0007 /* HP_PGAS_BIAS - [2:0] */
+#define WM8961_HP_PGAS_BIAS_SHIFT 0 /* HP_PGAS_BIAS - [2:0] */
+#define WM8961_HP_PGAS_BIAS_WIDTH 3 /* HP_PGAS_BIAS - [2:0] */
+
+/*
+ * R69 (0x45) - Analogue HP 0
+ */
+#define WM8961_HPL_RMV_SHORT 0x0080 /* HPL_RMV_SHORT */
+#define WM8961_HPL_RMV_SHORT_MASK 0x0080 /* HPL_RMV_SHORT */
+#define WM8961_HPL_RMV_SHORT_SHIFT 7 /* HPL_RMV_SHORT */
+#define WM8961_HPL_RMV_SHORT_WIDTH 1 /* HPL_RMV_SHORT */
+#define WM8961_HPL_ENA_OUTP 0x0040 /* HPL_ENA_OUTP */
+#define WM8961_HPL_ENA_OUTP_MASK 0x0040 /* HPL_ENA_OUTP */
+#define WM8961_HPL_ENA_OUTP_SHIFT 6 /* HPL_ENA_OUTP */
+#define WM8961_HPL_ENA_OUTP_WIDTH 1 /* HPL_ENA_OUTP */
+#define WM8961_HPL_ENA_DLY 0x0020 /* HPL_ENA_DLY */
+#define WM8961_HPL_ENA_DLY_MASK 0x0020 /* HPL_ENA_DLY */
+#define WM8961_HPL_ENA_DLY_SHIFT 5 /* HPL_ENA_DLY */
+#define WM8961_HPL_ENA_DLY_WIDTH 1 /* HPL_ENA_DLY */
+#define WM8961_HPL_ENA 0x0010 /* HPL_ENA */
+#define WM8961_HPL_ENA_MASK 0x0010 /* HPL_ENA */
+#define WM8961_HPL_ENA_SHIFT 4 /* HPL_ENA */
+#define WM8961_HPL_ENA_WIDTH 1 /* HPL_ENA */
+#define WM8961_HPR_RMV_SHORT 0x0008 /* HPR_RMV_SHORT */
+#define WM8961_HPR_RMV_SHORT_MASK 0x0008 /* HPR_RMV_SHORT */
+#define WM8961_HPR_RMV_SHORT_SHIFT 3 /* HPR_RMV_SHORT */
+#define WM8961_HPR_RMV_SHORT_WIDTH 1 /* HPR_RMV_SHORT */
+#define WM8961_HPR_ENA_OUTP 0x0004 /* HPR_ENA_OUTP */
+#define WM8961_HPR_ENA_OUTP_MASK 0x0004 /* HPR_ENA_OUTP */
+#define WM8961_HPR_ENA_OUTP_SHIFT 2 /* HPR_ENA_OUTP */
+#define WM8961_HPR_ENA_OUTP_WIDTH 1 /* HPR_ENA_OUTP */
+#define WM8961_HPR_ENA_DLY 0x0002 /* HPR_ENA_DLY */
+#define WM8961_HPR_ENA_DLY_MASK 0x0002 /* HPR_ENA_DLY */
+#define WM8961_HPR_ENA_DLY_SHIFT 1 /* HPR_ENA_DLY */
+#define WM8961_HPR_ENA_DLY_WIDTH 1 /* HPR_ENA_DLY */
+#define WM8961_HPR_ENA 0x0001 /* HPR_ENA */
+#define WM8961_HPR_ENA_MASK 0x0001 /* HPR_ENA */
+#define WM8961_HPR_ENA_SHIFT 0 /* HPR_ENA */
+#define WM8961_HPR_ENA_WIDTH 1 /* HPR_ENA */
+
+/*
+ * R71 (0x47) - Analogue HP 2
+ */
+#define WM8961_HPL_VOL_MASK 0x01C0 /* HPL_VOL - [8:6] */
+#define WM8961_HPL_VOL_SHIFT 6 /* HPL_VOL - [8:6] */
+#define WM8961_HPL_VOL_WIDTH 3 /* HPL_VOL - [8:6] */
+#define WM8961_HPR_VOL_MASK 0x0038 /* HPR_VOL - [5:3] */
+#define WM8961_HPR_VOL_SHIFT 3 /* HPR_VOL - [5:3] */
+#define WM8961_HPR_VOL_WIDTH 3 /* HPR_VOL - [5:3] */
+#define WM8961_HP_BIAS_BOOST_MASK 0x0007 /* HP_BIAS_BOOST - [2:0] */
+#define WM8961_HP_BIAS_BOOST_SHIFT 0 /* HP_BIAS_BOOST - [2:0] */
+#define WM8961_HP_BIAS_BOOST_WIDTH 3 /* HP_BIAS_BOOST - [2:0] */
+
+/*
+ * R72 (0x48) - Charge Pump 1
+ */
+#define WM8961_CP_ENA 0x0001 /* CP_ENA */
+#define WM8961_CP_ENA_MASK 0x0001 /* CP_ENA */
+#define WM8961_CP_ENA_SHIFT 0 /* CP_ENA */
+#define WM8961_CP_ENA_WIDTH 1 /* CP_ENA */
+
+/*
+ * R82 (0x52) - Charge Pump B
+ */
+#define WM8961_CP_DYN_PWR_MASK 0x0003 /* CP_DYN_PWR - [1:0] */
+#define WM8961_CP_DYN_PWR_SHIFT 0 /* CP_DYN_PWR - [1:0] */
+#define WM8961_CP_DYN_PWR_WIDTH 2 /* CP_DYN_PWR - [1:0] */
+
+/*
+ * R87 (0x57) - Write Sequencer 1
+ */
+#define WM8961_WSEQ_ENA 0x0020 /* WSEQ_ENA */
+#define WM8961_WSEQ_ENA_MASK 0x0020 /* WSEQ_ENA */
+#define WM8961_WSEQ_ENA_SHIFT 5 /* WSEQ_ENA */
+#define WM8961_WSEQ_ENA_WIDTH 1 /* WSEQ_ENA */
+#define WM8961_WSEQ_WRITE_INDEX_MASK 0x001F /* WSEQ_WRITE_INDEX - [4:0] */
+#define WM8961_WSEQ_WRITE_INDEX_SHIFT 0 /* WSEQ_WRITE_INDEX - [4:0] */
+#define WM8961_WSEQ_WRITE_INDEX_WIDTH 5 /* WSEQ_WRITE_INDEX - [4:0] */
+
+/*
+ * R88 (0x58) - Write Sequencer 2
+ */
+#define WM8961_WSEQ_EOS 0x0100 /* WSEQ_EOS */
+#define WM8961_WSEQ_EOS_MASK 0x0100 /* WSEQ_EOS */
+#define WM8961_WSEQ_EOS_SHIFT 8 /* WSEQ_EOS */
+#define WM8961_WSEQ_EOS_WIDTH 1 /* WSEQ_EOS */
+#define WM8961_WSEQ_ADDR_MASK 0x00FF /* WSEQ_ADDR - [7:0] */
+#define WM8961_WSEQ_ADDR_SHIFT 0 /* WSEQ_ADDR - [7:0] */
+#define WM8961_WSEQ_ADDR_WIDTH 8 /* WSEQ_ADDR - [7:0] */
+
+/*
+ * R89 (0x59) - Write Sequencer 3
+ */
+#define WM8961_WSEQ_DATA_MASK 0x00FF /* WSEQ_DATA - [7:0] */
+#define WM8961_WSEQ_DATA_SHIFT 0 /* WSEQ_DATA - [7:0] */
+#define WM8961_WSEQ_DATA_WIDTH 8 /* WSEQ_DATA - [7:0] */
+
+/*
+ * R90 (0x5A) - Write Sequencer 4
+ */
+#define WM8961_WSEQ_ABORT 0x0100 /* WSEQ_ABORT */
+#define WM8961_WSEQ_ABORT_MASK 0x0100 /* WSEQ_ABORT */
+#define WM8961_WSEQ_ABORT_SHIFT 8 /* WSEQ_ABORT */
+#define WM8961_WSEQ_ABORT_WIDTH 1 /* WSEQ_ABORT */
+#define WM8961_WSEQ_START 0x0080 /* WSEQ_START */
+#define WM8961_WSEQ_START_MASK 0x0080 /* WSEQ_START */
+#define WM8961_WSEQ_START_SHIFT 7 /* WSEQ_START */
+#define WM8961_WSEQ_START_WIDTH 1 /* WSEQ_START */
+#define WM8961_WSEQ_START_INDEX_MASK 0x003F /* WSEQ_START_INDEX - [5:0] */
+#define WM8961_WSEQ_START_INDEX_SHIFT 0 /* WSEQ_START_INDEX - [5:0] */
+#define WM8961_WSEQ_START_INDEX_WIDTH 6 /* WSEQ_START_INDEX - [5:0] */
+
+/*
+ * R91 (0x5B) - Write Sequencer 5
+ */
+#define WM8961_WSEQ_DATA_WIDTH_MASK 0x0070 /* WSEQ_DATA_WIDTH - [6:4] */
+#define WM8961_WSEQ_DATA_WIDTH_SHIFT 4 /* WSEQ_DATA_WIDTH - [6:4] */
+#define WM8961_WSEQ_DATA_WIDTH_WIDTH 3 /* WSEQ_DATA_WIDTH - [6:4] */
+#define WM8961_WSEQ_DATA_START_MASK 0x000F /* WSEQ_DATA_START - [3:0] */
+#define WM8961_WSEQ_DATA_START_SHIFT 0 /* WSEQ_DATA_START - [3:0] */
+#define WM8961_WSEQ_DATA_START_WIDTH 4 /* WSEQ_DATA_START - [3:0] */
+
+/*
+ * R92 (0x5C) - Write Sequencer 6
+ */
+#define WM8961_WSEQ_DELAY_MASK 0x000F /* WSEQ_DELAY - [3:0] */
+#define WM8961_WSEQ_DELAY_SHIFT 0 /* WSEQ_DELAY - [3:0] */
+#define WM8961_WSEQ_DELAY_WIDTH 4 /* WSEQ_DELAY - [3:0] */
+
+/*
+ * R93 (0x5D) - Write Sequencer 7
+ */
+#define WM8961_WSEQ_BUSY 0x0001 /* WSEQ_BUSY */
+#define WM8961_WSEQ_BUSY_MASK 0x0001 /* WSEQ_BUSY */
+#define WM8961_WSEQ_BUSY_SHIFT 0 /* WSEQ_BUSY */
+#define WM8961_WSEQ_BUSY_WIDTH 1 /* WSEQ_BUSY */
+
+/*
+ * R252 (0xFC) - General test 1
+ */
+#define WM8961_ARA_ENA 0x0002 /* ARA_ENA */
+#define WM8961_ARA_ENA_MASK 0x0002 /* ARA_ENA */
+#define WM8961_ARA_ENA_SHIFT 1 /* ARA_ENA */
+#define WM8961_ARA_ENA_WIDTH 1 /* ARA_ENA */
+#define WM8961_AUTO_INC 0x0001 /* AUTO_INC */
+#define WM8961_AUTO_INC_MASK 0x0001 /* AUTO_INC */
+#define WM8961_AUTO_INC_SHIFT 0 /* AUTO_INC */
+#define WM8961_AUTO_INC_WIDTH 1 /* AUTO_INC */
+
+#endif
0x0079, 0x0079, 0x0079, /* 40 */
};
-static inline unsigned int wm8971_read_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- u16 *cache = codec->reg_cache;
- if (reg < WM8971_REG_COUNT)
- return cache[reg];
-
- return -1;
-}
-
-static inline void wm8971_write_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg, unsigned int value)
-{
- u16 *cache = codec->reg_cache;
- if (reg < WM8971_REG_COUNT)
- cache[reg] = value;
-}
-
-static int wm8971_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u8 data[2];
-
- /* data is
- * D15..D9 WM8753 register offset
- * D8...D0 register data
- */
- data[0] = (reg << 1) | ((value >> 8) & 0x0001);
- data[1] = value & 0x00ff;
-
- wm8971_write_reg_cache (codec, reg, value);
- if (codec->hw_write(codec->control_data, data, 2) == 2)
- return 0;
- else
- return -EIO;
-}
-
-#define wm8971_reset(c) wm8971_write(c, WM8971_RESET, 0)
+#define wm8971_reset(c) snd_soc_write(c, WM8971_RESET, 0)
/* WM8971 Controls */
static const char *wm8971_bass[] = { "Linear Control", "Adaptive Boost" };
return -EINVAL;
}
- wm8971_write(codec, WM8971_IFACE, iface);
+ snd_soc_write(codec, WM8971_IFACE, iface);
return 0;
}
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = socdev->card->codec;
struct wm8971_priv *wm8971 = codec->private_data;
- u16 iface = wm8971_read_reg_cache(codec, WM8971_IFACE) & 0x1f3;
- u16 srate = wm8971_read_reg_cache(codec, WM8971_SRATE) & 0x1c0;
+ u16 iface = snd_soc_read(codec, WM8971_IFACE) & 0x1f3;
+ u16 srate = snd_soc_read(codec, WM8971_SRATE) & 0x1c0;
int coeff = get_coeff(wm8971->sysclk, params_rate(params));
/* bit size */
}
/* set iface & srate */
- wm8971_write(codec, WM8971_IFACE, iface);
+ snd_soc_write(codec, WM8971_IFACE, iface);
if (coeff >= 0)
- wm8971_write(codec, WM8971_SRATE, srate |
+ snd_soc_write(codec, WM8971_SRATE, srate |
(coeff_div[coeff].sr << 1) | coeff_div[coeff].usb);
return 0;
static int wm8971_mute(struct snd_soc_dai *dai, int mute)
{
struct snd_soc_codec *codec = dai->codec;
- u16 mute_reg = wm8971_read_reg_cache(codec, WM8971_ADCDAC) & 0xfff7;
+ u16 mute_reg = snd_soc_read(codec, WM8971_ADCDAC) & 0xfff7;
if (mute)
- wm8971_write(codec, WM8971_ADCDAC, mute_reg | 0x8);
+ snd_soc_write(codec, WM8971_ADCDAC, mute_reg | 0x8);
else
- wm8971_write(codec, WM8971_ADCDAC, mute_reg);
+ snd_soc_write(codec, WM8971_ADCDAC, mute_reg);
return 0;
}
static int wm8971_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
- u16 pwr_reg = wm8971_read_reg_cache(codec, WM8971_PWR1) & 0xfe3e;
+ u16 pwr_reg = snd_soc_read(codec, WM8971_PWR1) & 0xfe3e;
switch (level) {
case SND_SOC_BIAS_ON:
/* set vmid to 50k and unmute dac */
- wm8971_write(codec, WM8971_PWR1, pwr_reg | 0x00c1);
+ snd_soc_write(codec, WM8971_PWR1, pwr_reg | 0x00c1);
break;
case SND_SOC_BIAS_PREPARE:
break;
case SND_SOC_BIAS_STANDBY:
/* mute dac and set vmid to 500k, enable VREF */
- wm8971_write(codec, WM8971_PWR1, pwr_reg | 0x0140);
+ snd_soc_write(codec, WM8971_PWR1, pwr_reg | 0x0140);
break;
case SND_SOC_BIAS_OFF:
- wm8971_write(codec, WM8971_PWR1, 0x0001);
+ snd_soc_write(codec, WM8971_PWR1, 0x0001);
break;
}
codec->bias_level = level;
/* charge wm8971 caps */
if (codec->suspend_bias_level == SND_SOC_BIAS_ON) {
- reg = wm8971_read_reg_cache(codec, WM8971_PWR1) & 0xfe3e;
- wm8971_write(codec, WM8971_PWR1, reg | 0x01c0);
+ reg = snd_soc_read(codec, WM8971_PWR1) & 0xfe3e;
+ snd_soc_write(codec, WM8971_PWR1, reg | 0x01c0);
codec->bias_level = SND_SOC_BIAS_ON;
queue_delayed_work(wm8971_workq, &codec->delayed_work,
msecs_to_jiffies(1000));
return 0;
}
-static int wm8971_init(struct snd_soc_device *socdev)
+static int wm8971_init(struct snd_soc_device *socdev,
+ enum snd_soc_control_type control)
{
struct snd_soc_codec *codec = socdev->card->codec;
int reg, ret = 0;
codec->name = "WM8971";
codec->owner = THIS_MODULE;
- codec->read = wm8971_read_reg_cache;
- codec->write = wm8971_write;
codec->set_bias_level = wm8971_set_bias_level;
codec->dai = &wm8971_dai;
codec->reg_cache_size = ARRAY_SIZE(wm8971_reg);
if (codec->reg_cache == NULL)
return -ENOMEM;
+ ret = snd_soc_codec_set_cache_io(codec, 7, 9, control);
+ if (ret < 0) {
+ printk(KERN_ERR "wm8971: failed to set cache I/O: %d\n", ret);
+ goto err;
+ }
+
wm8971_reset(codec);
/* register pcms */
ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
if (ret < 0) {
printk(KERN_ERR "wm8971: failed to create pcms\n");
- goto pcm_err;
+ goto err;
}
/* charge output caps - set vmid to 5k for quick power up */
- reg = wm8971_read_reg_cache(codec, WM8971_PWR1) & 0xfe3e;
- wm8971_write(codec, WM8971_PWR1, reg | 0x01c0);
+ reg = snd_soc_read(codec, WM8971_PWR1) & 0xfe3e;
+ snd_soc_write(codec, WM8971_PWR1, reg | 0x01c0);
codec->bias_level = SND_SOC_BIAS_STANDBY;
queue_delayed_work(wm8971_workq, &codec->delayed_work,
msecs_to_jiffies(1000));
/* set the update bits */
- reg = wm8971_read_reg_cache(codec, WM8971_LDAC);
- wm8971_write(codec, WM8971_LDAC, reg | 0x0100);
- reg = wm8971_read_reg_cache(codec, WM8971_RDAC);
- wm8971_write(codec, WM8971_RDAC, reg | 0x0100);
-
- reg = wm8971_read_reg_cache(codec, WM8971_LOUT1V);
- wm8971_write(codec, WM8971_LOUT1V, reg | 0x0100);
- reg = wm8971_read_reg_cache(codec, WM8971_ROUT1V);
- wm8971_write(codec, WM8971_ROUT1V, reg | 0x0100);
-
- reg = wm8971_read_reg_cache(codec, WM8971_LOUT2V);
- wm8971_write(codec, WM8971_LOUT2V, reg | 0x0100);
- reg = wm8971_read_reg_cache(codec, WM8971_ROUT2V);
- wm8971_write(codec, WM8971_ROUT2V, reg | 0x0100);
-
- reg = wm8971_read_reg_cache(codec, WM8971_LINVOL);
- wm8971_write(codec, WM8971_LINVOL, reg | 0x0100);
- reg = wm8971_read_reg_cache(codec, WM8971_RINVOL);
- wm8971_write(codec, WM8971_RINVOL, reg | 0x0100);
+ reg = snd_soc_read(codec, WM8971_LDAC);
+ snd_soc_write(codec, WM8971_LDAC, reg | 0x0100);
+ reg = snd_soc_read(codec, WM8971_RDAC);
+ snd_soc_write(codec, WM8971_RDAC, reg | 0x0100);
+
+ reg = snd_soc_read(codec, WM8971_LOUT1V);
+ snd_soc_write(codec, WM8971_LOUT1V, reg | 0x0100);
+ reg = snd_soc_read(codec, WM8971_ROUT1V);
+ snd_soc_write(codec, WM8971_ROUT1V, reg | 0x0100);
+
+ reg = snd_soc_read(codec, WM8971_LOUT2V);
+ snd_soc_write(codec, WM8971_LOUT2V, reg | 0x0100);
+ reg = snd_soc_read(codec, WM8971_ROUT2V);
+ snd_soc_write(codec, WM8971_ROUT2V, reg | 0x0100);
+
+ reg = snd_soc_read(codec, WM8971_LINVOL);
+ snd_soc_write(codec, WM8971_LINVOL, reg | 0x0100);
+ reg = snd_soc_read(codec, WM8971_RINVOL);
+ snd_soc_write(codec, WM8971_RINVOL, reg | 0x0100);
snd_soc_add_controls(codec, wm8971_snd_controls,
ARRAY_SIZE(wm8971_snd_controls));
card_err:
snd_soc_free_pcms(socdev);
snd_soc_dapm_free(socdev);
-pcm_err:
+err:
kfree(codec->reg_cache);
return ret;
}
codec->control_data = i2c;
- ret = wm8971_init(socdev);
+ ret = wm8971_init(socdev, SND_SOC_I2C);
if (ret < 0)
pr_err("failed to initialise WM8971\n");
#if defined (CONFIG_I2C) || defined (CONFIG_I2C_MODULE)
if (setup->i2c_address) {
- codec->hw_write = (hw_write_t)i2c_master_send;
ret = wm8971_add_i2c_device(pdev, setup);
}
#endif
--- /dev/null
+/*
+ * wm8974.c -- WM8974 ALSA Soc Audio driver
+ *
+ * Copyright 2006-2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Liam Girdwood <linux@wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include "wm8974.h"
+
+static const u16 wm8974_reg[WM8974_CACHEREGNUM] = {
+ 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0050, 0x0000, 0x0140, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x00ff,
+ 0x0000, 0x0000, 0x0100, 0x00ff,
+ 0x0000, 0x0000, 0x012c, 0x002c,
+ 0x002c, 0x002c, 0x002c, 0x0000,
+ 0x0032, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0038, 0x000b, 0x0032, 0x0000,
+ 0x0008, 0x000c, 0x0093, 0x00e9,
+ 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0003, 0x0010, 0x0000, 0x0000,
+ 0x0000, 0x0002, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0039, 0x0000,
+ 0x0000,
+};
+
+#define WM8974_POWER1_BIASEN 0x08
+#define WM8974_POWER1_BUFIOEN 0x10
+
+struct wm8974_priv {
+ struct snd_soc_codec codec;
+ u16 reg_cache[WM8974_CACHEREGNUM];
+};
+
+static struct snd_soc_codec *wm8974_codec;
+
+#define wm8974_reset(c) snd_soc_write(c, WM8974_RESET, 0)
+
+static const char *wm8974_companding[] = {"Off", "NC", "u-law", "A-law" };
+static const char *wm8974_deemp[] = {"None", "32kHz", "44.1kHz", "48kHz" };
+static const char *wm8974_eqmode[] = {"Capture", "Playback" };
+static const char *wm8974_bw[] = {"Narrow", "Wide" };
+static const char *wm8974_eq1[] = {"80Hz", "105Hz", "135Hz", "175Hz" };
+static const char *wm8974_eq2[] = {"230Hz", "300Hz", "385Hz", "500Hz" };
+static const char *wm8974_eq3[] = {"650Hz", "850Hz", "1.1kHz", "1.4kHz" };
+static const char *wm8974_eq4[] = {"1.8kHz", "2.4kHz", "3.2kHz", "4.1kHz" };
+static const char *wm8974_eq5[] = {"5.3kHz", "6.9kHz", "9kHz", "11.7kHz" };
+static const char *wm8974_alc[] = {"ALC", "Limiter" };
+
+static const struct soc_enum wm8974_enum[] = {
+ SOC_ENUM_SINGLE(WM8974_COMP, 1, 4, wm8974_companding), /* adc */
+ SOC_ENUM_SINGLE(WM8974_COMP, 3, 4, wm8974_companding), /* dac */
+ SOC_ENUM_SINGLE(WM8974_DAC, 4, 4, wm8974_deemp),
+ SOC_ENUM_SINGLE(WM8974_EQ1, 8, 2, wm8974_eqmode),
+
+ SOC_ENUM_SINGLE(WM8974_EQ1, 5, 4, wm8974_eq1),
+ SOC_ENUM_SINGLE(WM8974_EQ2, 8, 2, wm8974_bw),
+ SOC_ENUM_SINGLE(WM8974_EQ2, 5, 4, wm8974_eq2),
+ SOC_ENUM_SINGLE(WM8974_EQ3, 8, 2, wm8974_bw),
+
+ SOC_ENUM_SINGLE(WM8974_EQ3, 5, 4, wm8974_eq3),
+ SOC_ENUM_SINGLE(WM8974_EQ4, 8, 2, wm8974_bw),
+ SOC_ENUM_SINGLE(WM8974_EQ4, 5, 4, wm8974_eq4),
+ SOC_ENUM_SINGLE(WM8974_EQ5, 8, 2, wm8974_bw),
+
+ SOC_ENUM_SINGLE(WM8974_EQ5, 5, 4, wm8974_eq5),
+ SOC_ENUM_SINGLE(WM8974_ALC3, 8, 2, wm8974_alc),
+};
+
+static const char *wm8974_auxmode_text[] = { "Buffer", "Mixer" };
+
+static const struct soc_enum wm8974_auxmode =
+ SOC_ENUM_SINGLE(WM8974_INPUT, 3, 2, wm8974_auxmode_text);
+
+static const DECLARE_TLV_DB_SCALE(digital_tlv, -12750, 50, 1);
+static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
+static const DECLARE_TLV_DB_SCALE(inpga_tlv, -1200, 75, 0);
+static const DECLARE_TLV_DB_SCALE(spk_tlv, -5700, 100, 0);
+
+static const struct snd_kcontrol_new wm8974_snd_controls[] = {
+
+SOC_SINGLE("Digital Loopback Switch", WM8974_COMP, 0, 1, 0),
+
+SOC_ENUM("DAC Companding", wm8974_enum[1]),
+SOC_ENUM("ADC Companding", wm8974_enum[0]),
+
+SOC_ENUM("Playback De-emphasis", wm8974_enum[2]),
+SOC_SINGLE("DAC Inversion Switch", WM8974_DAC, 0, 1, 0),
+
+SOC_SINGLE_TLV("PCM Volume", WM8974_DACVOL, 0, 255, 0, digital_tlv),
+
+SOC_SINGLE("High Pass Filter Switch", WM8974_ADC, 8, 1, 0),
+SOC_SINGLE("High Pass Cut Off", WM8974_ADC, 4, 7, 0),
+SOC_SINGLE("ADC Inversion Switch", WM8974_ADC, 0, 1, 0),
+
+SOC_SINGLE_TLV("Capture Volume", WM8974_ADCVOL, 0, 255, 0, digital_tlv),
+
+SOC_ENUM("Equaliser Function", wm8974_enum[3]),
+SOC_ENUM("EQ1 Cut Off", wm8974_enum[4]),
+SOC_SINGLE_TLV("EQ1 Volume", WM8974_EQ1, 0, 24, 1, eq_tlv),
+
+SOC_ENUM("Equaliser EQ2 Bandwith", wm8974_enum[5]),
+SOC_ENUM("EQ2 Cut Off", wm8974_enum[6]),
+SOC_SINGLE_TLV("EQ2 Volume", WM8974_EQ2, 0, 24, 1, eq_tlv),
+
+SOC_ENUM("Equaliser EQ3 Bandwith", wm8974_enum[7]),
+SOC_ENUM("EQ3 Cut Off", wm8974_enum[8]),
+SOC_SINGLE_TLV("EQ3 Volume", WM8974_EQ3, 0, 24, 1, eq_tlv),
+
+SOC_ENUM("Equaliser EQ4 Bandwith", wm8974_enum[9]),
+SOC_ENUM("EQ4 Cut Off", wm8974_enum[10]),
+SOC_SINGLE_TLV("EQ4 Volume", WM8974_EQ4, 0, 24, 1, eq_tlv),
+
+SOC_ENUM("Equaliser EQ5 Bandwith", wm8974_enum[11]),
+SOC_ENUM("EQ5 Cut Off", wm8974_enum[12]),
+SOC_SINGLE_TLV("EQ5 Volume", WM8974_EQ5, 0, 24, 1, eq_tlv),
+
+SOC_SINGLE("DAC Playback Limiter Switch", WM8974_DACLIM1, 8, 1, 0),
+SOC_SINGLE("DAC Playback Limiter Decay", WM8974_DACLIM1, 4, 15, 0),
+SOC_SINGLE("DAC Playback Limiter Attack", WM8974_DACLIM1, 0, 15, 0),
+
+SOC_SINGLE("DAC Playback Limiter Threshold", WM8974_DACLIM2, 4, 7, 0),
+SOC_SINGLE("DAC Playback Limiter Boost", WM8974_DACLIM2, 0, 15, 0),
+
+SOC_SINGLE("ALC Enable Switch", WM8974_ALC1, 8, 1, 0),
+SOC_SINGLE("ALC Capture Max Gain", WM8974_ALC1, 3, 7, 0),
+SOC_SINGLE("ALC Capture Min Gain", WM8974_ALC1, 0, 7, 0),
+
+SOC_SINGLE("ALC Capture ZC Switch", WM8974_ALC2, 8, 1, 0),
+SOC_SINGLE("ALC Capture Hold", WM8974_ALC2, 4, 7, 0),
+SOC_SINGLE("ALC Capture Target", WM8974_ALC2, 0, 15, 0),
+
+SOC_ENUM("ALC Capture Mode", wm8974_enum[13]),
+SOC_SINGLE("ALC Capture Decay", WM8974_ALC3, 4, 15, 0),
+SOC_SINGLE("ALC Capture Attack", WM8974_ALC3, 0, 15, 0),
+
+SOC_SINGLE("ALC Capture Noise Gate Switch", WM8974_NGATE, 3, 1, 0),
+SOC_SINGLE("ALC Capture Noise Gate Threshold", WM8974_NGATE, 0, 7, 0),
+
+SOC_SINGLE("Capture PGA ZC Switch", WM8974_INPPGA, 7, 1, 0),
+SOC_SINGLE_TLV("Capture PGA Volume", WM8974_INPPGA, 0, 63, 0, inpga_tlv),
+
+SOC_SINGLE("Speaker Playback ZC Switch", WM8974_SPKVOL, 7, 1, 0),
+SOC_SINGLE("Speaker Playback Switch", WM8974_SPKVOL, 6, 1, 1),
+SOC_SINGLE_TLV("Speaker Playback Volume", WM8974_SPKVOL, 0, 63, 0, spk_tlv),
+
+SOC_ENUM("Aux Mode", wm8974_auxmode),
+
+SOC_SINGLE("Capture Boost(+20dB)", WM8974_ADCBOOST, 8, 1, 0),
+SOC_SINGLE("Mono Playback Switch", WM8974_MONOMIX, 6, 1, 1),
+};
+
+/* Speaker Output Mixer */
+static const struct snd_kcontrol_new wm8974_speaker_mixer_controls[] = {
+SOC_DAPM_SINGLE("Line Bypass Switch", WM8974_SPKMIX, 1, 1, 0),
+SOC_DAPM_SINGLE("Aux Playback Switch", WM8974_SPKMIX, 5, 1, 0),
+SOC_DAPM_SINGLE("PCM Playback Switch", WM8974_SPKMIX, 0, 1, 1),
+};
+
+/* Mono Output Mixer */
+static const struct snd_kcontrol_new wm8974_mono_mixer_controls[] = {
+SOC_DAPM_SINGLE("Line Bypass Switch", WM8974_MONOMIX, 1, 1, 0),
+SOC_DAPM_SINGLE("Aux Playback Switch", WM8974_MONOMIX, 2, 1, 0),
+SOC_DAPM_SINGLE("PCM Playback Switch", WM8974_MONOMIX, 0, 1, 0),
+};
+
+/* Boost mixer */
+static const struct snd_kcontrol_new wm8974_boost_mixer[] = {
+SOC_DAPM_SINGLE("Aux Switch", WM8974_INPPGA, 6, 1, 0),
+};
+
+/* Input PGA */
+static const struct snd_kcontrol_new wm8974_inpga[] = {
+SOC_DAPM_SINGLE("Aux Switch", WM8974_INPUT, 2, 1, 0),
+SOC_DAPM_SINGLE("MicN Switch", WM8974_INPUT, 1, 1, 0),
+SOC_DAPM_SINGLE("MicP Switch", WM8974_INPUT, 0, 1, 0),
+};
+
+/* AUX Input boost vol */
+static const struct snd_kcontrol_new wm8974_aux_boost_controls =
+SOC_DAPM_SINGLE("Aux Volume", WM8974_ADCBOOST, 0, 7, 0);
+
+/* Mic Input boost vol */
+static const struct snd_kcontrol_new wm8974_mic_boost_controls =
+SOC_DAPM_SINGLE("Mic Volume", WM8974_ADCBOOST, 4, 7, 0);
+
+static const struct snd_soc_dapm_widget wm8974_dapm_widgets[] = {
+SND_SOC_DAPM_MIXER("Speaker Mixer", WM8974_POWER3, 2, 0,
+ &wm8974_speaker_mixer_controls[0],
+ ARRAY_SIZE(wm8974_speaker_mixer_controls)),
+SND_SOC_DAPM_MIXER("Mono Mixer", WM8974_POWER3, 3, 0,
+ &wm8974_mono_mixer_controls[0],
+ ARRAY_SIZE(wm8974_mono_mixer_controls)),
+SND_SOC_DAPM_DAC("DAC", "HiFi Playback", WM8974_POWER3, 0, 0),
+SND_SOC_DAPM_ADC("ADC", "HiFi Capture", WM8974_POWER2, 0, 0),
+SND_SOC_DAPM_PGA("Aux Input", WM8974_POWER1, 6, 0, NULL, 0),
+SND_SOC_DAPM_PGA("SpkN Out", WM8974_POWER3, 5, 0, NULL, 0),
+SND_SOC_DAPM_PGA("SpkP Out", WM8974_POWER3, 6, 0, NULL, 0),
+SND_SOC_DAPM_PGA("Mono Out", WM8974_POWER3, 7, 0, NULL, 0),
+
+SND_SOC_DAPM_MIXER("Input PGA", WM8974_POWER2, 2, 0, wm8974_inpga,
+ ARRAY_SIZE(wm8974_inpga)),
+SND_SOC_DAPM_MIXER("Boost Mixer", WM8974_POWER2, 4, 0,
+ wm8974_boost_mixer, ARRAY_SIZE(wm8974_boost_mixer)),
+
+SND_SOC_DAPM_MICBIAS("Mic Bias", WM8974_POWER1, 4, 0),
+
+SND_SOC_DAPM_INPUT("MICN"),
+SND_SOC_DAPM_INPUT("MICP"),
+SND_SOC_DAPM_INPUT("AUX"),
+SND_SOC_DAPM_OUTPUT("MONOOUT"),
+SND_SOC_DAPM_OUTPUT("SPKOUTP"),
+SND_SOC_DAPM_OUTPUT("SPKOUTN"),
+};
+
+static const struct snd_soc_dapm_route audio_map[] = {
+ /* Mono output mixer */
+ {"Mono Mixer", "PCM Playback Switch", "DAC"},
+ {"Mono Mixer", "Aux Playback Switch", "Aux Input"},
+ {"Mono Mixer", "Line Bypass Switch", "Boost Mixer"},
+
+ /* Speaker output mixer */
+ {"Speaker Mixer", "PCM Playback Switch", "DAC"},
+ {"Speaker Mixer", "Aux Playback Switch", "Aux Input"},
+ {"Speaker Mixer", "Line Bypass Switch", "Boost Mixer"},
+
+ /* Outputs */
+ {"Mono Out", NULL, "Mono Mixer"},
+ {"MONOOUT", NULL, "Mono Out"},
+ {"SpkN Out", NULL, "Speaker Mixer"},
+ {"SpkP Out", NULL, "Speaker Mixer"},
+ {"SPKOUTN", NULL, "SpkN Out"},
+ {"SPKOUTP", NULL, "SpkP Out"},
+
+ /* Boost Mixer */
+ {"ADC", NULL, "Boost Mixer"},
+ {"Boost Mixer", "Aux Switch", "Aux Input"},
+ {"Boost Mixer", NULL, "Input PGA"},
+ {"Boost Mixer", NULL, "MICP"},
+
+ /* Input PGA */
+ {"Input PGA", "Aux Switch", "Aux Input"},
+ {"Input PGA", "MicN Switch", "MICN"},
+ {"Input PGA", "MicP Switch", "MICP"},
+
+ /* Inputs */
+ {"Aux Input", NULL, "AUX"},
+};
+
+static int wm8974_add_widgets(struct snd_soc_codec *codec)
+{
+ snd_soc_dapm_new_controls(codec, wm8974_dapm_widgets,
+ ARRAY_SIZE(wm8974_dapm_widgets));
+
+ snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+
+ snd_soc_dapm_new_widgets(codec);
+ return 0;
+}
+
+struct pll_ {
+ unsigned int pre_div:4; /* prescale - 1 */
+ unsigned int n:4;
+ unsigned int k;
+};
+
+static struct pll_ pll_div;
+
+/* The size in bits of the pll divide multiplied by 10
+ * to allow rounding later */
+#define FIXED_PLL_SIZE ((1 << 24) * 10)
+
+static void pll_factors(unsigned int target, unsigned int source)
+{
+ unsigned long long Kpart;
+ unsigned int K, Ndiv, Nmod;
+
+ Ndiv = target / source;
+ if (Ndiv < 6) {
+ source >>= 1;
+ pll_div.pre_div = 1;
+ Ndiv = target / source;
+ } else
+ pll_div.pre_div = 0;
+
+ if ((Ndiv < 6) || (Ndiv > 12))
+ printk(KERN_WARNING
+ "WM8974 N value %u outwith recommended range!\n",
+ Ndiv);
+
+ pll_div.n = Ndiv;
+ Nmod = target % source;
+ Kpart = FIXED_PLL_SIZE * (long long)Nmod;
+
+ do_div(Kpart, source);
+
+ K = Kpart & 0xFFFFFFFF;
+
+ /* Check if we need to round */
+ if ((K % 10) >= 5)
+ K += 5;
+
+ /* Move down to proper range now rounding is done */
+ K /= 10;
+
+ pll_div.k = K;
+}
+
+static int wm8974_set_dai_pll(struct snd_soc_dai *codec_dai,
+ int pll_id, unsigned int freq_in, unsigned int freq_out)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ u16 reg;
+
+ if (freq_in == 0 || freq_out == 0) {
+ /* Clock CODEC directly from MCLK */
+ reg = snd_soc_read(codec, WM8974_CLOCK);
+ snd_soc_write(codec, WM8974_CLOCK, reg & 0x0ff);
+
+ /* Turn off PLL */
+ reg = snd_soc_read(codec, WM8974_POWER1);
+ snd_soc_write(codec, WM8974_POWER1, reg & 0x1df);
+ return 0;
+ }
+
+ pll_factors(freq_out*4, freq_in);
+
+ snd_soc_write(codec, WM8974_PLLN, (pll_div.pre_div << 4) | pll_div.n);
+ snd_soc_write(codec, WM8974_PLLK1, pll_div.k >> 18);
+ snd_soc_write(codec, WM8974_PLLK2, (pll_div.k >> 9) & 0x1ff);
+ snd_soc_write(codec, WM8974_PLLK3, pll_div.k & 0x1ff);
+ reg = snd_soc_read(codec, WM8974_POWER1);
+ snd_soc_write(codec, WM8974_POWER1, reg | 0x020);
+
+ /* Run CODEC from PLL instead of MCLK */
+ reg = snd_soc_read(codec, WM8974_CLOCK);
+ snd_soc_write(codec, WM8974_CLOCK, reg | 0x100);
+
+ return 0;
+}
+
+/*
+ * Configure WM8974 clock dividers.
+ */
+static int wm8974_set_dai_clkdiv(struct snd_soc_dai *codec_dai,
+ int div_id, int div)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ u16 reg;
+
+ switch (div_id) {
+ case WM8974_OPCLKDIV:
+ reg = snd_soc_read(codec, WM8974_GPIO) & 0x1cf;
+ snd_soc_write(codec, WM8974_GPIO, reg | div);
+ break;
+ case WM8974_MCLKDIV:
+ reg = snd_soc_read(codec, WM8974_CLOCK) & 0x11f;
+ snd_soc_write(codec, WM8974_CLOCK, reg | div);
+ break;
+ case WM8974_ADCCLK:
+ reg = snd_soc_read(codec, WM8974_ADC) & 0x1f7;
+ snd_soc_write(codec, WM8974_ADC, reg | div);
+ break;
+ case WM8974_DACCLK:
+ reg = snd_soc_read(codec, WM8974_DAC) & 0x1f7;
+ snd_soc_write(codec, WM8974_DAC, reg | div);
+ break;
+ case WM8974_BCLKDIV:
+ reg = snd_soc_read(codec, WM8974_CLOCK) & 0x1e3;
+ snd_soc_write(codec, WM8974_CLOCK, reg | div);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int wm8974_set_dai_fmt(struct snd_soc_dai *codec_dai,
+ unsigned int fmt)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ u16 iface = 0;
+ u16 clk = snd_soc_read(codec, WM8974_CLOCK) & 0x1fe;
+
+ /* set master/slave audio interface */
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBM_CFM:
+ clk |= 0x0001;
+ break;
+ case SND_SOC_DAIFMT_CBS_CFS:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* interface format */
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ iface |= 0x0010;
+ break;
+ case SND_SOC_DAIFMT_RIGHT_J:
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ iface |= 0x0008;
+ break;
+ case SND_SOC_DAIFMT_DSP_A:
+ iface |= 0x00018;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* clock inversion */
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_IF:
+ iface |= 0x0180;
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ iface |= 0x0100;
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ iface |= 0x0080;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ snd_soc_write(codec, WM8974_IFACE, iface);
+ snd_soc_write(codec, WM8974_CLOCK, clk);
+ return 0;
+}
+
+static int wm8974_pcm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ u16 iface = snd_soc_read(codec, WM8974_IFACE) & 0x19f;
+ u16 adn = snd_soc_read(codec, WM8974_ADD) & 0x1f1;
+
+ /* bit size */
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ iface |= 0x0020;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ iface |= 0x0040;
+ break;
+ case SNDRV_PCM_FORMAT_S32_LE:
+ iface |= 0x0060;
+ break;
+ }
+
+ /* filter coefficient */
+ switch (params_rate(params)) {
+ case SNDRV_PCM_RATE_8000:
+ adn |= 0x5 << 1;
+ break;
+ case SNDRV_PCM_RATE_11025:
+ adn |= 0x4 << 1;
+ break;
+ case SNDRV_PCM_RATE_16000:
+ adn |= 0x3 << 1;
+ break;
+ case SNDRV_PCM_RATE_22050:
+ adn |= 0x2 << 1;
+ break;
+ case SNDRV_PCM_RATE_32000:
+ adn |= 0x1 << 1;
+ break;
+ case SNDRV_PCM_RATE_44100:
+ case SNDRV_PCM_RATE_48000:
+ break;
+ }
+
+ snd_soc_write(codec, WM8974_IFACE, iface);
+ snd_soc_write(codec, WM8974_ADD, adn);
+ return 0;
+}
+
+static int wm8974_mute(struct snd_soc_dai *dai, int mute)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ u16 mute_reg = snd_soc_read(codec, WM8974_DAC) & 0xffbf;
+
+ if (mute)
+ snd_soc_write(codec, WM8974_DAC, mute_reg | 0x40);
+ else
+ snd_soc_write(codec, WM8974_DAC, mute_reg);
+ return 0;
+}
+
+/* liam need to make this lower power with dapm */
+static int wm8974_set_bias_level(struct snd_soc_codec *codec,
+ enum snd_soc_bias_level level)
+{
+ u16 power1 = snd_soc_read(codec, WM8974_POWER1) & ~0x3;
+
+ switch (level) {
+ case SND_SOC_BIAS_ON:
+ case SND_SOC_BIAS_PREPARE:
+ power1 |= 0x1; /* VMID 50k */
+ snd_soc_write(codec, WM8974_POWER1, power1);
+ break;
+
+ case SND_SOC_BIAS_STANDBY:
+ power1 |= WM8974_POWER1_BIASEN | WM8974_POWER1_BUFIOEN;
+
+ if (codec->bias_level == SND_SOC_BIAS_OFF) {
+ /* Initial cap charge at VMID 5k */
+ snd_soc_write(codec, WM8974_POWER1, power1 | 0x3);
+ mdelay(100);
+ }
+
+ power1 |= 0x2; /* VMID 500k */
+ snd_soc_write(codec, WM8974_POWER1, power1);
+ break;
+
+ case SND_SOC_BIAS_OFF:
+ snd_soc_write(codec, WM8974_POWER1, 0);
+ snd_soc_write(codec, WM8974_POWER2, 0);
+ snd_soc_write(codec, WM8974_POWER3, 0);
+ break;
+ }
+
+ codec->bias_level = level;
+ return 0;
+}
+
+#define WM8974_RATES (SNDRV_PCM_RATE_8000_48000)
+
+#define WM8974_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
+ SNDRV_PCM_FMTBIT_S24_LE)
+
+static struct snd_soc_dai_ops wm8974_ops = {
+ .hw_params = wm8974_pcm_hw_params,
+ .digital_mute = wm8974_mute,
+ .set_fmt = wm8974_set_dai_fmt,
+ .set_clkdiv = wm8974_set_dai_clkdiv,
+ .set_pll = wm8974_set_dai_pll,
+};
+
+struct snd_soc_dai wm8974_dai = {
+ .name = "WM8974 HiFi",
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 1,
+ .channels_max = 2, /* Only 1 channel of data */
+ .rates = WM8974_RATES,
+ .formats = WM8974_FORMATS,},
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 1,
+ .channels_max = 2, /* Only 1 channel of data */
+ .rates = WM8974_RATES,
+ .formats = WM8974_FORMATS,},
+ .ops = &wm8974_ops,
+ .symmetric_rates = 1,
+};
+EXPORT_SYMBOL_GPL(wm8974_dai);
+
+static int wm8974_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->card->codec;
+
+ wm8974_set_bias_level(codec, SND_SOC_BIAS_OFF);
+ return 0;
+}
+
+static int wm8974_resume(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->card->codec;
+ int i;
+ u8 data[2];
+ u16 *cache = codec->reg_cache;
+
+ /* Sync reg_cache with the hardware */
+ for (i = 0; i < ARRAY_SIZE(wm8974_reg); i++) {
+ data[0] = (i << 1) | ((cache[i] >> 8) & 0x0001);
+ data[1] = cache[i] & 0x00ff;
+ codec->hw_write(codec->control_data, data, 2);
+ }
+ wm8974_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+ wm8974_set_bias_level(codec, codec->suspend_bias_level);
+ return 0;
+}
+
+static int wm8974_probe(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec;
+ int ret = 0;
+
+ if (wm8974_codec == NULL) {
+ dev_err(&pdev->dev, "Codec device not registered\n");
+ return -ENODEV;
+ }
+
+ socdev->card->codec = wm8974_codec;
+ codec = wm8974_codec;
+
+ /* register pcms */
+ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+ if (ret < 0) {
+ dev_err(codec->dev, "failed to create pcms: %d\n", ret);
+ goto pcm_err;
+ }
+
+ snd_soc_add_controls(codec, wm8974_snd_controls,
+ ARRAY_SIZE(wm8974_snd_controls));
+ wm8974_add_widgets(codec);
+ ret = snd_soc_init_card(socdev);
+ if (ret < 0) {
+ dev_err(codec->dev, "failed to register card: %d\n", ret);
+ goto card_err;
+ }
+
+ return ret;
+
+card_err:
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+pcm_err:
+ return ret;
+}
+
+/* power down chip */
+static int wm8974_remove(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+
+ return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_wm8974 = {
+ .probe = wm8974_probe,
+ .remove = wm8974_remove,
+ .suspend = wm8974_suspend,
+ .resume = wm8974_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm8974);
+
+static __devinit int wm8974_register(struct wm8974_priv *wm8974)
+{
+ int ret;
+ struct snd_soc_codec *codec = &wm8974->codec;
+
+ if (wm8974_codec) {
+ dev_err(codec->dev, "Another WM8974 is registered\n");
+ return -EINVAL;
+ }
+
+ mutex_init(&codec->mutex);
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
+
+ codec->private_data = wm8974;
+ codec->name = "WM8974";
+ codec->owner = THIS_MODULE;
+ codec->bias_level = SND_SOC_BIAS_OFF;
+ codec->set_bias_level = wm8974_set_bias_level;
+ codec->dai = &wm8974_dai;
+ codec->num_dai = 1;
+ codec->reg_cache_size = WM8974_CACHEREGNUM;
+ codec->reg_cache = &wm8974->reg_cache;
+
+ ret = snd_soc_codec_set_cache_io(codec, 7, 9, SND_SOC_I2C);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+ goto err;
+ }
+
+ memcpy(codec->reg_cache, wm8974_reg, sizeof(wm8974_reg));
+
+ ret = wm8974_reset(codec);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to issue reset\n");
+ goto err;
+ }
+
+ wm8974_dai.dev = codec->dev;
+
+ wm8974_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+ wm8974_codec = codec;
+
+ ret = snd_soc_register_codec(codec);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+ goto err;
+ }
+
+ ret = snd_soc_register_dai(&wm8974_dai);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
+ goto err_codec;
+ }
+
+ return 0;
+
+err_codec:
+ snd_soc_unregister_codec(codec);
+err:
+ kfree(wm8974);
+ return ret;
+}
+
+static __devexit void wm8974_unregister(struct wm8974_priv *wm8974)
+{
+ wm8974_set_bias_level(&wm8974->codec, SND_SOC_BIAS_OFF);
+ snd_soc_unregister_dai(&wm8974_dai);
+ snd_soc_unregister_codec(&wm8974->codec);
+ kfree(wm8974);
+ wm8974_codec = NULL;
+}
+
+static __devinit int wm8974_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct wm8974_priv *wm8974;
+ struct snd_soc_codec *codec;
+
+ wm8974 = kzalloc(sizeof(struct wm8974_priv), GFP_KERNEL);
+ if (wm8974 == NULL)
+ return -ENOMEM;
+
+ codec = &wm8974->codec;
+ codec->hw_write = (hw_write_t)i2c_master_send;
+
+ i2c_set_clientdata(i2c, wm8974);
+ codec->control_data = i2c;
+
+ codec->dev = &i2c->dev;
+
+ return wm8974_register(wm8974);
+}
+
+static __devexit int wm8974_i2c_remove(struct i2c_client *client)
+{
+ struct wm8974_priv *wm8974 = i2c_get_clientdata(client);
+ wm8974_unregister(wm8974);
+ return 0;
+}
+
+static const struct i2c_device_id wm8974_i2c_id[] = {
+ { "wm8974", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, wm8974_i2c_id);
+
+static struct i2c_driver wm8974_i2c_driver = {
+ .driver = {
+ .name = "WM8974",
+ .owner = THIS_MODULE,
+ },
+ .probe = wm8974_i2c_probe,
+ .remove = __devexit_p(wm8974_i2c_remove),
+ .id_table = wm8974_i2c_id,
+};
+
+static int __init wm8974_modinit(void)
+{
+ return i2c_add_driver(&wm8974_i2c_driver);
+}
+module_init(wm8974_modinit);
+
+static void __exit wm8974_exit(void)
+{
+ i2c_del_driver(&wm8974_i2c_driver);
+}
+module_exit(wm8974_exit);
+
+MODULE_DESCRIPTION("ASoC WM8974 driver");
+MODULE_AUTHOR("Liam Girdwood");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * wm8974.h -- WM8974 Soc Audio driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _WM8974_H
+#define _WM8974_H
+
+/* WM8974 register space */
+
+#define WM8974_RESET 0x0
+#define WM8974_POWER1 0x1
+#define WM8974_POWER2 0x2
+#define WM8974_POWER3 0x3
+#define WM8974_IFACE 0x4
+#define WM8974_COMP 0x5
+#define WM8974_CLOCK 0x6
+#define WM8974_ADD 0x7
+#define WM8974_GPIO 0x8
+#define WM8974_DAC 0xa
+#define WM8974_DACVOL 0xb
+#define WM8974_ADC 0xe
+#define WM8974_ADCVOL 0xf
+#define WM8974_EQ1 0x12
+#define WM8974_EQ2 0x13
+#define WM8974_EQ3 0x14
+#define WM8974_EQ4 0x15
+#define WM8974_EQ5 0x16
+#define WM8974_DACLIM1 0x18
+#define WM8974_DACLIM2 0x19
+#define WM8974_NOTCH1 0x1b
+#define WM8974_NOTCH2 0x1c
+#define WM8974_NOTCH3 0x1d
+#define WM8974_NOTCH4 0x1e
+#define WM8974_ALC1 0x20
+#define WM8974_ALC2 0x21
+#define WM8974_ALC3 0x22
+#define WM8974_NGATE 0x23
+#define WM8974_PLLN 0x24
+#define WM8974_PLLK1 0x25
+#define WM8974_PLLK2 0x26
+#define WM8974_PLLK3 0x27
+#define WM8974_ATTEN 0x28
+#define WM8974_INPUT 0x2c
+#define WM8974_INPPGA 0x2d
+#define WM8974_ADCBOOST 0x2f
+#define WM8974_OUTPUT 0x31
+#define WM8974_SPKMIX 0x32
+#define WM8974_SPKVOL 0x36
+#define WM8974_MONOMIX 0x38
+
+#define WM8974_CACHEREGNUM 57
+
+/* Clock divider Id's */
+#define WM8974_OPCLKDIV 0
+#define WM8974_MCLKDIV 1
+#define WM8974_ADCCLK 2
+#define WM8974_DACCLK 3
+#define WM8974_BCLKDIV 4
+
+/* DAC clock dividers */
+#define WM8974_DACCLK_F2 (1 << 3)
+#define WM8974_DACCLK_F4 (0 << 3)
+
+/* ADC clock dividers */
+#define WM8974_ADCCLK_F2 (1 << 3)
+#define WM8974_ADCCLK_F4 (0 << 3)
+
+/* PLL Out dividers */
+#define WM8974_OPCLKDIV_1 (0 << 4)
+#define WM8974_OPCLKDIV_2 (1 << 4)
+#define WM8974_OPCLKDIV_3 (2 << 4)
+#define WM8974_OPCLKDIV_4 (3 << 4)
+
+/* BCLK clock dividers */
+#define WM8974_BCLKDIV_1 (0 << 2)
+#define WM8974_BCLKDIV_2 (1 << 2)
+#define WM8974_BCLKDIV_4 (2 << 2)
+#define WM8974_BCLKDIV_8 (3 << 2)
+#define WM8974_BCLKDIV_16 (4 << 2)
+#define WM8974_BCLKDIV_32 (5 << 2)
+
+/* MCLK clock dividers */
+#define WM8974_MCLKDIV_1 (0 << 5)
+#define WM8974_MCLKDIV_1_5 (1 << 5)
+#define WM8974_MCLKDIV_2 (2 << 5)
+#define WM8974_MCLKDIV_3 (3 << 5)
+#define WM8974_MCLKDIV_4 (4 << 5)
+#define WM8974_MCLKDIV_6 (5 << 5)
+#define WM8974_MCLKDIV_8 (6 << 5)
+#define WM8974_MCLKDIV_12 (7 << 5)
+
+extern struct snd_soc_dai wm8974_dai;
+extern struct snd_soc_codec_device soc_codec_dev_wm8974;
+
+#endif
};
-/*
- * read wm8988 register cache
- */
-static inline unsigned int wm8988_read_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- u16 *cache = codec->reg_cache;
- if (reg > WM8988_NUM_REG)
- return -1;
- return cache[reg];
-}
-
-/*
- * write wm8988 register cache
- */
-static inline void wm8988_write_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg, unsigned int value)
-{
- u16 *cache = codec->reg_cache;
- if (reg > WM8988_NUM_REG)
- return;
- cache[reg] = value;
-}
-
-static int wm8988_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u8 data[2];
-
- /* data is
- * D15..D9 WM8753 register offset
- * D8...D0 register data
- */
- data[0] = (reg << 1) | ((value >> 8) & 0x0001);
- data[1] = value & 0x00ff;
-
- wm8988_write_reg_cache(codec, reg, value);
- if (codec->hw_write(codec->control_data, data, 2) == 2)
- return 0;
- else
- return -EIO;
-}
-
-#define wm8988_reset(c) wm8988_write(c, WM8988_RESET, 0)
+#define wm8988_reset(c) snd_soc_write(c, WM8988_RESET, 0)
/*
* WM8988 Controls
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_codec *codec = w->codec;
- u16 adctl2 = wm8988_read_reg_cache(codec, WM8988_ADCTL2);
+ u16 adctl2 = snd_soc_read(codec, WM8988_ADCTL2);
/* Use the DAC to gate LRC if active, otherwise use ADC */
- if (wm8988_read_reg_cache(codec, WM8988_PWR2) & 0x180)
+ if (snd_soc_read(codec, WM8988_PWR2) & 0x180)
adctl2 &= ~0x4;
else
adctl2 |= 0x4;
- return wm8988_write(codec, WM8988_ADCTL2, adctl2);
+ return snd_soc_write(codec, WM8988_ADCTL2, adctl2);
}
static const char *wm8988_line_texts[] = {
return -EINVAL;
}
- wm8988_write(codec, WM8988_IFACE, iface);
+ snd_soc_write(codec, WM8988_IFACE, iface);
return 0;
}
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = socdev->card->codec;
struct wm8988_priv *wm8988 = codec->private_data;
- u16 iface = wm8988_read_reg_cache(codec, WM8988_IFACE) & 0x1f3;
- u16 srate = wm8988_read_reg_cache(codec, WM8988_SRATE) & 0x180;
+ u16 iface = snd_soc_read(codec, WM8988_IFACE) & 0x1f3;
+ u16 srate = snd_soc_read(codec, WM8988_SRATE) & 0x180;
int coeff;
coeff = get_coeff(wm8988->sysclk, params_rate(params));
}
/* set iface & srate */
- wm8988_write(codec, WM8988_IFACE, iface);
+ snd_soc_write(codec, WM8988_IFACE, iface);
if (coeff >= 0)
- wm8988_write(codec, WM8988_SRATE, srate |
+ snd_soc_write(codec, WM8988_SRATE, srate |
(coeff_div[coeff].sr << 1) | coeff_div[coeff].usb);
return 0;
static int wm8988_mute(struct snd_soc_dai *dai, int mute)
{
struct snd_soc_codec *codec = dai->codec;
- u16 mute_reg = wm8988_read_reg_cache(codec, WM8988_ADCDAC) & 0xfff7;
+ u16 mute_reg = snd_soc_read(codec, WM8988_ADCDAC) & 0xfff7;
if (mute)
- wm8988_write(codec, WM8988_ADCDAC, mute_reg | 0x8);
+ snd_soc_write(codec, WM8988_ADCDAC, mute_reg | 0x8);
else
- wm8988_write(codec, WM8988_ADCDAC, mute_reg);
+ snd_soc_write(codec, WM8988_ADCDAC, mute_reg);
return 0;
}
static int wm8988_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
- u16 pwr_reg = wm8988_read_reg_cache(codec, WM8988_PWR1) & ~0x1c1;
+ u16 pwr_reg = snd_soc_read(codec, WM8988_PWR1) & ~0x1c1;
switch (level) {
case SND_SOC_BIAS_ON:
case SND_SOC_BIAS_PREPARE:
/* VREF, VMID=2x50k, digital enabled */
- wm8988_write(codec, WM8988_PWR1, pwr_reg | 0x00c0);
+ snd_soc_write(codec, WM8988_PWR1, pwr_reg | 0x00c0);
break;
case SND_SOC_BIAS_STANDBY:
if (codec->bias_level == SND_SOC_BIAS_OFF) {
/* VREF, VMID=2x5k */
- wm8988_write(codec, WM8988_PWR1, pwr_reg | 0x1c1);
+ snd_soc_write(codec, WM8988_PWR1, pwr_reg | 0x1c1);
/* Charge caps */
msleep(100);
}
/* VREF, VMID=2*500k, digital stopped */
- wm8988_write(codec, WM8988_PWR1, pwr_reg | 0x0141);
+ snd_soc_write(codec, WM8988_PWR1, pwr_reg | 0x0141);
break;
case SND_SOC_BIAS_OFF:
- wm8988_write(codec, WM8988_PWR1, 0x0000);
+ snd_soc_write(codec, WM8988_PWR1, 0x0000);
break;
}
codec->bias_level = level;
};
EXPORT_SYMBOL_GPL(soc_codec_dev_wm8988);
-static int wm8988_register(struct wm8988_priv *wm8988)
+static int wm8988_register(struct wm8988_priv *wm8988,
+ enum snd_soc_control_type control)
{
struct snd_soc_codec *codec = &wm8988->codec;
int ret;
codec->private_data = wm8988;
codec->name = "WM8988";
codec->owner = THIS_MODULE;
- codec->read = wm8988_read_reg_cache;
- codec->write = wm8988_write;
codec->dai = &wm8988_dai;
codec->num_dai = 1;
codec->reg_cache_size = ARRAY_SIZE(wm8988->reg_cache);
memcpy(codec->reg_cache, wm8988_reg,
sizeof(wm8988_reg));
+ ret = snd_soc_codec_set_cache_io(codec, 7, 9, control);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+ goto err;
+ }
+
ret = wm8988_reset(codec);
if (ret < 0) {
dev_err(codec->dev, "Failed to issue reset\n");
- return ret;
+ goto err;
}
/* set the update bits (we always update left then right) */
- reg = wm8988_read_reg_cache(codec, WM8988_RADC);
- wm8988_write(codec, WM8988_RADC, reg | 0x100);
- reg = wm8988_read_reg_cache(codec, WM8988_RDAC);
- wm8988_write(codec, WM8988_RDAC, reg | 0x0100);
- reg = wm8988_read_reg_cache(codec, WM8988_ROUT1V);
- wm8988_write(codec, WM8988_ROUT1V, reg | 0x0100);
- reg = wm8988_read_reg_cache(codec, WM8988_ROUT2V);
- wm8988_write(codec, WM8988_ROUT2V, reg | 0x0100);
- reg = wm8988_read_reg_cache(codec, WM8988_RINVOL);
- wm8988_write(codec, WM8988_RINVOL, reg | 0x0100);
+ reg = snd_soc_read(codec, WM8988_RADC);
+ snd_soc_write(codec, WM8988_RADC, reg | 0x100);
+ reg = snd_soc_read(codec, WM8988_RDAC);
+ snd_soc_write(codec, WM8988_RDAC, reg | 0x0100);
+ reg = snd_soc_read(codec, WM8988_ROUT1V);
+ snd_soc_write(codec, WM8988_ROUT1V, reg | 0x0100);
+ reg = snd_soc_read(codec, WM8988_ROUT2V);
+ snd_soc_write(codec, WM8988_ROUT2V, reg | 0x0100);
+ reg = snd_soc_read(codec, WM8988_RINVOL);
+ snd_soc_write(codec, WM8988_RINVOL, reg | 0x0100);
wm8988_set_bias_level(&wm8988->codec, SND_SOC_BIAS_STANDBY);
ret = snd_soc_register_codec(codec);
if (ret != 0) {
dev_err(codec->dev, "Failed to register codec: %d\n", ret);
- return ret;
+ goto err;
}
ret = snd_soc_register_dai(&wm8988_dai);
if (ret != 0) {
dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
snd_soc_unregister_codec(codec);
- return ret;
+ goto err_codec;
}
return 0;
+err_codec:
+ snd_soc_unregister_codec(codec);
err:
kfree(wm8988);
return ret;
return -ENOMEM;
codec = &wm8988->codec;
- codec->hw_write = (hw_write_t)i2c_master_send;
i2c_set_clientdata(i2c, wm8988);
codec->control_data = i2c;
codec->dev = &i2c->dev;
- return wm8988_register(wm8988);
+ return wm8988_register(wm8988, SND_SOC_I2C);
}
static int wm8988_i2c_remove(struct i2c_client *client)
return 0;
}
+#ifdef CONFIG_PM
+static int wm8988_i2c_suspend(struct i2c_client *client, pm_message_t msg)
+{
+ return snd_soc_suspend_device(&client->dev);
+}
+
+static int wm8988_i2c_resume(struct i2c_client *client)
+{
+ return snd_soc_resume_device(&client->dev);
+}
+#else
+#define wm8988_i2c_suspend NULL
+#define wm8988_i2c_resume NULL
+#endif
+
static const struct i2c_device_id wm8988_i2c_id[] = {
{ "wm8988", 0 },
{ }
},
.probe = wm8988_i2c_probe,
.remove = wm8988_i2c_remove,
+ .suspend = wm8988_i2c_suspend,
+ .resume = wm8988_i2c_resume,
.id_table = wm8988_i2c_id,
};
#endif
#if defined(CONFIG_SPI_MASTER)
-static int wm8988_spi_write(struct spi_device *spi, const char *data, int len)
-{
- struct spi_transfer t;
- struct spi_message m;
- u8 msg[2];
-
- if (len <= 0)
- return 0;
-
- msg[0] = data[0];
- msg[1] = data[1];
-
- spi_message_init(&m);
- memset(&t, 0, (sizeof t));
-
- t.tx_buf = &msg[0];
- t.len = len;
-
- spi_message_add_tail(&t, &m);
- spi_sync(spi, &m);
-
- return len;
-}
-
static int __devinit wm8988_spi_probe(struct spi_device *spi)
{
struct wm8988_priv *wm8988;
return -ENOMEM;
codec = &wm8988->codec;
- codec->hw_write = (hw_write_t)wm8988_spi_write;
codec->control_data = spi;
codec->dev = &spi->dev;
dev_set_drvdata(&spi->dev, wm8988);
- return wm8988_register(wm8988);
+ return wm8988_register(wm8988, SND_SOC_SPI);
}
static int __devexit wm8988_spi_remove(struct spi_device *spi)
return 0;
}
+#ifdef CONFIG_PM
+static int wm8988_spi_suspend(struct spi_device *spi, pm_message_t msg)
+{
+ return snd_soc_suspend_device(&spi->dev);
+}
+
+static int wm8988_spi_resume(struct spi_device *spi)
+{
+ return snd_soc_resume_device(&spi->dev);
+}
+#else
+#define wm8988_spi_suspend NULL
+#define wm8988_spi_resume NULL
+#endif
+
static struct spi_driver wm8988_spi_driver = {
.driver = {
.name = "wm8988",
},
.probe = wm8988_spi_probe,
.remove = __devexit_p(wm8988_spi_remove),
+ .suspend = wm8988_spi_suspend,
+ .resume = wm8988_spi_resume,
};
#endif
0x0000, /* R63 - Driver internal */
};
-/*
- * read wm8990 register cache
- */
-static inline unsigned int wm8990_read_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- u16 *cache = codec->reg_cache;
- BUG_ON(reg >= ARRAY_SIZE(wm8990_reg));
- return cache[reg];
-}
-
-/*
- * write wm8990 register cache
- */
-static inline void wm8990_write_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg, unsigned int value)
-{
- u16 *cache = codec->reg_cache;
-
- /* Reset register and reserved registers are uncached */
- if (reg == 0 || reg >= ARRAY_SIZE(wm8990_reg))
- return;
-
- cache[reg] = value;
-}
-
-/*
- * write to the wm8990 register space
- */
-static int wm8990_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u8 data[3];
-
- data[0] = reg & 0xFF;
- data[1] = (value >> 8) & 0xFF;
- data[2] = value & 0xFF;
-
- wm8990_write_reg_cache(codec, reg, value);
-
- if (codec->hw_write(codec->control_data, data, 3) == 2)
- return 0;
- else
- return -EIO;
-}
-
-#define wm8990_reset(c) wm8990_write(c, WM8990_RESET, 0)
+#define wm8990_reset(c) snd_soc_write(c, WM8990_RESET, 0)
static const DECLARE_TLV_DB_LINEAR(rec_mix_tlv, -1500, 600);
return ret;
/* now hit the volume update bits (always bit 8) */
- val = wm8990_read_reg_cache(codec, reg);
- return wm8990_write(codec, reg, val | 0x0100);
+ val = snd_soc_read(codec, reg);
+ return snd_soc_write(codec, reg, val | 0x0100);
}
#define SOC_WM899X_OUTPGA_SINGLE_R_TLV(xname, reg, shift, max, invert,\
{
u16 reg, fakepower;
- reg = wm8990_read_reg_cache(w->codec, WM8990_POWER_MANAGEMENT_2);
- fakepower = wm8990_read_reg_cache(w->codec, WM8990_INTDRIVBITS);
+ reg = snd_soc_read(w->codec, WM8990_POWER_MANAGEMENT_2);
+ fakepower = snd_soc_read(w->codec, WM8990_INTDRIVBITS);
if (fakepower & ((1 << WM8990_INMIXL_PWR_BIT) |
(1 << WM8990_AINLMUX_PWR_BIT))) {
} else {
reg &= ~WM8990_AINL_ENA;
}
- wm8990_write(w->codec, WM8990_POWER_MANAGEMENT_2, reg);
+ snd_soc_write(w->codec, WM8990_POWER_MANAGEMENT_2, reg);
return 0;
}
switch (reg_shift) {
case WM8990_SPEAKER_MIXER | (WM8990_LDSPK_BIT << 8) :
- reg = wm8990_read_reg_cache(w->codec, WM8990_OUTPUT_MIXER1);
+ reg = snd_soc_read(w->codec, WM8990_OUTPUT_MIXER1);
if (reg & WM8990_LDLO) {
printk(KERN_WARNING
"Cannot set as Output Mixer 1 LDLO Set\n");
}
break;
case WM8990_SPEAKER_MIXER | (WM8990_RDSPK_BIT << 8):
- reg = wm8990_read_reg_cache(w->codec, WM8990_OUTPUT_MIXER2);
+ reg = snd_soc_read(w->codec, WM8990_OUTPUT_MIXER2);
if (reg & WM8990_RDRO) {
printk(KERN_WARNING
"Cannot set as Output Mixer 2 RDRO Set\n");
}
break;
case WM8990_OUTPUT_MIXER1 | (WM8990_LDLO_BIT << 8):
- reg = wm8990_read_reg_cache(w->codec, WM8990_SPEAKER_MIXER);
+ reg = snd_soc_read(w->codec, WM8990_SPEAKER_MIXER);
if (reg & WM8990_LDSPK) {
printk(KERN_WARNING
"Cannot set as Speaker Mixer LDSPK Set\n");
}
break;
case WM8990_OUTPUT_MIXER2 | (WM8990_RDRO_BIT << 8):
- reg = wm8990_read_reg_cache(w->codec, WM8990_SPEAKER_MIXER);
+ reg = snd_soc_read(w->codec, WM8990_SPEAKER_MIXER);
if (reg & WM8990_RDSPK) {
printk(KERN_WARNING
"Cannot set as Speaker Mixer RDSPK Set\n");
pll_factors(&pll_div, freq_out * 4, freq_in);
/* Turn on PLL */
- reg = wm8990_read_reg_cache(codec, WM8990_POWER_MANAGEMENT_2);
+ reg = snd_soc_read(codec, WM8990_POWER_MANAGEMENT_2);
reg |= WM8990_PLL_ENA;
- wm8990_write(codec, WM8990_POWER_MANAGEMENT_2, reg);
+ snd_soc_write(codec, WM8990_POWER_MANAGEMENT_2, reg);
/* sysclk comes from PLL */
- reg = wm8990_read_reg_cache(codec, WM8990_CLOCKING_2);
- wm8990_write(codec, WM8990_CLOCKING_2, reg | WM8990_SYSCLK_SRC);
+ reg = snd_soc_read(codec, WM8990_CLOCKING_2);
+ snd_soc_write(codec, WM8990_CLOCKING_2, reg | WM8990_SYSCLK_SRC);
/* set up N , fractional mode and pre-divisor if neccessary */
- wm8990_write(codec, WM8990_PLL1, pll_div.n | WM8990_SDM |
+ snd_soc_write(codec, WM8990_PLL1, pll_div.n | WM8990_SDM |
(pll_div.div2?WM8990_PRESCALE:0));
- wm8990_write(codec, WM8990_PLL2, (u8)(pll_div.k>>8));
- wm8990_write(codec, WM8990_PLL3, (u8)(pll_div.k & 0xFF));
+ snd_soc_write(codec, WM8990_PLL2, (u8)(pll_div.k>>8));
+ snd_soc_write(codec, WM8990_PLL3, (u8)(pll_div.k & 0xFF));
} else {
/* Turn on PLL */
- reg = wm8990_read_reg_cache(codec, WM8990_POWER_MANAGEMENT_2);
+ reg = snd_soc_read(codec, WM8990_POWER_MANAGEMENT_2);
reg &= ~WM8990_PLL_ENA;
- wm8990_write(codec, WM8990_POWER_MANAGEMENT_2, reg);
+ snd_soc_write(codec, WM8990_POWER_MANAGEMENT_2, reg);
}
return 0;
}
struct snd_soc_codec *codec = codec_dai->codec;
u16 audio1, audio3;
- audio1 = wm8990_read_reg_cache(codec, WM8990_AUDIO_INTERFACE_1);
- audio3 = wm8990_read_reg_cache(codec, WM8990_AUDIO_INTERFACE_3);
+ audio1 = snd_soc_read(codec, WM8990_AUDIO_INTERFACE_1);
+ audio3 = snd_soc_read(codec, WM8990_AUDIO_INTERFACE_3);
/* set master/slave audio interface */
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
return -EINVAL;
}
- wm8990_write(codec, WM8990_AUDIO_INTERFACE_1, audio1);
- wm8990_write(codec, WM8990_AUDIO_INTERFACE_3, audio3);
+ snd_soc_write(codec, WM8990_AUDIO_INTERFACE_1, audio1);
+ snd_soc_write(codec, WM8990_AUDIO_INTERFACE_3, audio3);
return 0;
}
switch (div_id) {
case WM8990_MCLK_DIV:
- reg = wm8990_read_reg_cache(codec, WM8990_CLOCKING_2) &
+ reg = snd_soc_read(codec, WM8990_CLOCKING_2) &
~WM8990_MCLK_DIV_MASK;
- wm8990_write(codec, WM8990_CLOCKING_2, reg | div);
+ snd_soc_write(codec, WM8990_CLOCKING_2, reg | div);
break;
case WM8990_DACCLK_DIV:
- reg = wm8990_read_reg_cache(codec, WM8990_CLOCKING_2) &
+ reg = snd_soc_read(codec, WM8990_CLOCKING_2) &
~WM8990_DAC_CLKDIV_MASK;
- wm8990_write(codec, WM8990_CLOCKING_2, reg | div);
+ snd_soc_write(codec, WM8990_CLOCKING_2, reg | div);
break;
case WM8990_ADCCLK_DIV:
- reg = wm8990_read_reg_cache(codec, WM8990_CLOCKING_2) &
+ reg = snd_soc_read(codec, WM8990_CLOCKING_2) &
~WM8990_ADC_CLKDIV_MASK;
- wm8990_write(codec, WM8990_CLOCKING_2, reg | div);
+ snd_soc_write(codec, WM8990_CLOCKING_2, reg | div);
break;
case WM8990_BCLK_DIV:
- reg = wm8990_read_reg_cache(codec, WM8990_CLOCKING_1) &
+ reg = snd_soc_read(codec, WM8990_CLOCKING_1) &
~WM8990_BCLK_DIV_MASK;
- wm8990_write(codec, WM8990_CLOCKING_1, reg | div);
+ snd_soc_write(codec, WM8990_CLOCKING_1, reg | div);
break;
default:
return -EINVAL;
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = socdev->card->codec;
- u16 audio1 = wm8990_read_reg_cache(codec, WM8990_AUDIO_INTERFACE_1);
+ u16 audio1 = snd_soc_read(codec, WM8990_AUDIO_INTERFACE_1);
audio1 &= ~WM8990_AIF_WL_MASK;
/* bit size */
break;
}
- wm8990_write(codec, WM8990_AUDIO_INTERFACE_1, audio1);
+ snd_soc_write(codec, WM8990_AUDIO_INTERFACE_1, audio1);
return 0;
}
struct snd_soc_codec *codec = dai->codec;
u16 val;
- val = wm8990_read_reg_cache(codec, WM8990_DAC_CTRL) & ~WM8990_DAC_MUTE;
+ val = snd_soc_read(codec, WM8990_DAC_CTRL) & ~WM8990_DAC_MUTE;
if (mute)
- wm8990_write(codec, WM8990_DAC_CTRL, val | WM8990_DAC_MUTE);
+ snd_soc_write(codec, WM8990_DAC_CTRL, val | WM8990_DAC_MUTE);
else
- wm8990_write(codec, WM8990_DAC_CTRL, val);
+ snd_soc_write(codec, WM8990_DAC_CTRL, val);
return 0;
}
case SND_SOC_BIAS_PREPARE:
/* VMID=2*50k */
- val = wm8990_read_reg_cache(codec, WM8990_POWER_MANAGEMENT_1) &
+ val = snd_soc_read(codec, WM8990_POWER_MANAGEMENT_1) &
~WM8990_VMID_MODE_MASK;
- wm8990_write(codec, WM8990_POWER_MANAGEMENT_1, val | 0x2);
+ snd_soc_write(codec, WM8990_POWER_MANAGEMENT_1, val | 0x2);
break;
case SND_SOC_BIAS_STANDBY:
if (codec->bias_level == SND_SOC_BIAS_OFF) {
/* Enable all output discharge bits */
- wm8990_write(codec, WM8990_ANTIPOP1, WM8990_DIS_LLINE |
+ snd_soc_write(codec, WM8990_ANTIPOP1, WM8990_DIS_LLINE |
WM8990_DIS_RLINE | WM8990_DIS_OUT3 |
WM8990_DIS_OUT4 | WM8990_DIS_LOUT |
WM8990_DIS_ROUT);
/* Enable POBCTRL, SOFT_ST, VMIDTOG and BUFDCOPEN */
- wm8990_write(codec, WM8990_ANTIPOP2, WM8990_SOFTST |
+ snd_soc_write(codec, WM8990_ANTIPOP2, WM8990_SOFTST |
WM8990_BUFDCOPEN | WM8990_POBCTRL |
WM8990_VMIDTOG);
msleep(msecs_to_jiffies(300));
/* Disable VMIDTOG */
- wm8990_write(codec, WM8990_ANTIPOP2, WM8990_SOFTST |
+ snd_soc_write(codec, WM8990_ANTIPOP2, WM8990_SOFTST |
WM8990_BUFDCOPEN | WM8990_POBCTRL);
/* disable all output discharge bits */
- wm8990_write(codec, WM8990_ANTIPOP1, 0);
+ snd_soc_write(codec, WM8990_ANTIPOP1, 0);
/* Enable outputs */
- wm8990_write(codec, WM8990_POWER_MANAGEMENT_1, 0x1b00);
+ snd_soc_write(codec, WM8990_POWER_MANAGEMENT_1, 0x1b00);
msleep(msecs_to_jiffies(50));
/* Enable VMID at 2x50k */
- wm8990_write(codec, WM8990_POWER_MANAGEMENT_1, 0x1f02);
+ snd_soc_write(codec, WM8990_POWER_MANAGEMENT_1, 0x1f02);
msleep(msecs_to_jiffies(100));
/* Enable VREF */
- wm8990_write(codec, WM8990_POWER_MANAGEMENT_1, 0x1f03);
+ snd_soc_write(codec, WM8990_POWER_MANAGEMENT_1, 0x1f03);
msleep(msecs_to_jiffies(600));
/* Enable BUFIOEN */
- wm8990_write(codec, WM8990_ANTIPOP2, WM8990_SOFTST |
+ snd_soc_write(codec, WM8990_ANTIPOP2, WM8990_SOFTST |
WM8990_BUFDCOPEN | WM8990_POBCTRL |
WM8990_BUFIOEN);
/* Disable outputs */
- wm8990_write(codec, WM8990_POWER_MANAGEMENT_1, 0x3);
+ snd_soc_write(codec, WM8990_POWER_MANAGEMENT_1, 0x3);
/* disable POBCTRL, SOFT_ST and BUFDCOPEN */
- wm8990_write(codec, WM8990_ANTIPOP2, WM8990_BUFIOEN);
+ snd_soc_write(codec, WM8990_ANTIPOP2, WM8990_BUFIOEN);
/* Enable workaround for ADC clocking issue. */
- wm8990_write(codec, WM8990_EXT_ACCESS_ENA, 0x2);
- wm8990_write(codec, WM8990_EXT_CTL1, 0xa003);
- wm8990_write(codec, WM8990_EXT_ACCESS_ENA, 0);
+ snd_soc_write(codec, WM8990_EXT_ACCESS_ENA, 0x2);
+ snd_soc_write(codec, WM8990_EXT_CTL1, 0xa003);
+ snd_soc_write(codec, WM8990_EXT_ACCESS_ENA, 0);
}
/* VMID=2*250k */
- val = wm8990_read_reg_cache(codec, WM8990_POWER_MANAGEMENT_1) &
+ val = snd_soc_read(codec, WM8990_POWER_MANAGEMENT_1) &
~WM8990_VMID_MODE_MASK;
- wm8990_write(codec, WM8990_POWER_MANAGEMENT_1, val | 0x4);
+ snd_soc_write(codec, WM8990_POWER_MANAGEMENT_1, val | 0x4);
break;
case SND_SOC_BIAS_OFF:
/* Enable POBCTRL and SOFT_ST */
- wm8990_write(codec, WM8990_ANTIPOP2, WM8990_SOFTST |
+ snd_soc_write(codec, WM8990_ANTIPOP2, WM8990_SOFTST |
WM8990_POBCTRL | WM8990_BUFIOEN);
/* Enable POBCTRL, SOFT_ST and BUFDCOPEN */
- wm8990_write(codec, WM8990_ANTIPOP2, WM8990_SOFTST |
+ snd_soc_write(codec, WM8990_ANTIPOP2, WM8990_SOFTST |
WM8990_BUFDCOPEN | WM8990_POBCTRL |
WM8990_BUFIOEN);
/* mute DAC */
- val = wm8990_read_reg_cache(codec, WM8990_DAC_CTRL);
- wm8990_write(codec, WM8990_DAC_CTRL, val | WM8990_DAC_MUTE);
+ val = snd_soc_read(codec, WM8990_DAC_CTRL);
+ snd_soc_write(codec, WM8990_DAC_CTRL, val | WM8990_DAC_MUTE);
/* Enable any disabled outputs */
- wm8990_write(codec, WM8990_POWER_MANAGEMENT_1, 0x1f03);
+ snd_soc_write(codec, WM8990_POWER_MANAGEMENT_1, 0x1f03);
/* Disable VMID */
- wm8990_write(codec, WM8990_POWER_MANAGEMENT_1, 0x1f01);
+ snd_soc_write(codec, WM8990_POWER_MANAGEMENT_1, 0x1f01);
msleep(msecs_to_jiffies(300));
/* Enable all output discharge bits */
- wm8990_write(codec, WM8990_ANTIPOP1, WM8990_DIS_LLINE |
+ snd_soc_write(codec, WM8990_ANTIPOP1, WM8990_DIS_LLINE |
WM8990_DIS_RLINE | WM8990_DIS_OUT3 |
WM8990_DIS_OUT4 | WM8990_DIS_LOUT |
WM8990_DIS_ROUT);
/* Disable VREF */
- wm8990_write(codec, WM8990_POWER_MANAGEMENT_1, 0x0);
+ snd_soc_write(codec, WM8990_POWER_MANAGEMENT_1, 0x0);
/* disable POBCTRL, SOFT_ST and BUFDCOPEN */
- wm8990_write(codec, WM8990_ANTIPOP2, 0x0);
+ snd_soc_write(codec, WM8990_ANTIPOP2, 0x0);
break;
}
codec->name = "WM8990";
codec->owner = THIS_MODULE;
- codec->read = wm8990_read_reg_cache;
- codec->write = wm8990_write;
codec->set_bias_level = wm8990_set_bias_level;
codec->dai = &wm8990_dai;
codec->num_dai = 2;
if (codec->reg_cache == NULL)
return -ENOMEM;
+ ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_I2C);
+ if (ret < 0) {
+ printk(KERN_ERR "wm8990: failed to set cache I/O: %d\n", ret);
+ goto pcm_err;
+ }
+
wm8990_reset(codec);
/* register pcms */
codec->bias_level = SND_SOC_BIAS_OFF;
wm8990_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
- reg = wm8990_read_reg_cache(codec, WM8990_AUDIO_INTERFACE_4);
- wm8990_write(codec, WM8990_AUDIO_INTERFACE_4, reg | WM8990_ALRCGPIO1);
+ reg = snd_soc_read(codec, WM8990_AUDIO_INTERFACE_4);
+ snd_soc_write(codec, WM8990_AUDIO_INTERFACE_4, reg | WM8990_ALRCGPIO1);
- reg = wm8990_read_reg_cache(codec, WM8990_GPIO1_GPIO2) &
+ reg = snd_soc_read(codec, WM8990_GPIO1_GPIO2) &
~WM8990_GPIO1_SEL_MASK;
- wm8990_write(codec, WM8990_GPIO1_GPIO2, reg | 1);
+ snd_soc_write(codec, WM8990_GPIO1_GPIO2, reg | 1);
- reg = wm8990_read_reg_cache(codec, WM8990_POWER_MANAGEMENT_2);
- wm8990_write(codec, WM8990_POWER_MANAGEMENT_2, reg | WM8990_OPCLK_ENA);
+ reg = snd_soc_read(codec, WM8990_POWER_MANAGEMENT_2);
+ snd_soc_write(codec, WM8990_POWER_MANAGEMENT_2, reg | WM8990_OPCLK_ENA);
- wm8990_write(codec, WM8990_LEFT_OUTPUT_VOLUME, 0x50 | (1<<8));
- wm8990_write(codec, WM8990_RIGHT_OUTPUT_VOLUME, 0x50 | (1<<8));
+ snd_soc_write(codec, WM8990_LEFT_OUTPUT_VOLUME, 0x50 | (1<<8));
+ snd_soc_write(codec, WM8990_RIGHT_OUTPUT_VOLUME, 0x50 | (1<<8));
snd_soc_add_controls(codec, wm8990_snd_controls,
ARRAY_SIZE(wm8990_snd_controls));
--- /dev/null
+/*
+ * wm8993.c -- WM8993 ALSA SoC audio driver
+ *
+ * Copyright 2009 Wolfson Microelectronics plc
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/spi/spi.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/tlv.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/wm8993.h>
+
+#include "wm8993.h"
+#include "wm_hubs.h"
+
+static u16 wm8993_reg_defaults[WM8993_REGISTER_COUNT] = {
+ 0x8993, /* R0 - Software Reset */
+ 0x0000, /* R1 - Power Management (1) */
+ 0x6000, /* R2 - Power Management (2) */
+ 0x0000, /* R3 - Power Management (3) */
+ 0x4050, /* R4 - Audio Interface (1) */
+ 0x4000, /* R5 - Audio Interface (2) */
+ 0x01C8, /* R6 - Clocking 1 */
+ 0x0000, /* R7 - Clocking 2 */
+ 0x0000, /* R8 - Audio Interface (3) */
+ 0x0040, /* R9 - Audio Interface (4) */
+ 0x0004, /* R10 - DAC CTRL */
+ 0x00C0, /* R11 - Left DAC Digital Volume */
+ 0x00C0, /* R12 - Right DAC Digital Volume */
+ 0x0000, /* R13 - Digital Side Tone */
+ 0x0300, /* R14 - ADC CTRL */
+ 0x00C0, /* R15 - Left ADC Digital Volume */
+ 0x00C0, /* R16 - Right ADC Digital Volume */
+ 0x0000, /* R17 */
+ 0x0000, /* R18 - GPIO CTRL 1 */
+ 0x0010, /* R19 - GPIO1 */
+ 0x0000, /* R20 - IRQ_DEBOUNCE */
+ 0x0000, /* R21 */
+ 0x8000, /* R22 - GPIOCTRL 2 */
+ 0x0800, /* R23 - GPIO_POL */
+ 0x008B, /* R24 - Left Line Input 1&2 Volume */
+ 0x008B, /* R25 - Left Line Input 3&4 Volume */
+ 0x008B, /* R26 - Right Line Input 1&2 Volume */
+ 0x008B, /* R27 - Right Line Input 3&4 Volume */
+ 0x006D, /* R28 - Left Output Volume */
+ 0x006D, /* R29 - Right Output Volume */
+ 0x0066, /* R30 - Line Outputs Volume */
+ 0x0020, /* R31 - HPOUT2 Volume */
+ 0x0079, /* R32 - Left OPGA Volume */
+ 0x0079, /* R33 - Right OPGA Volume */
+ 0x0003, /* R34 - SPKMIXL Attenuation */
+ 0x0003, /* R35 - SPKMIXR Attenuation */
+ 0x0011, /* R36 - SPKOUT Mixers */
+ 0x0100, /* R37 - SPKOUT Boost */
+ 0x0079, /* R38 - Speaker Volume Left */
+ 0x0079, /* R39 - Speaker Volume Right */
+ 0x0000, /* R40 - Input Mixer2 */
+ 0x0000, /* R41 - Input Mixer3 */
+ 0x0000, /* R42 - Input Mixer4 */
+ 0x0000, /* R43 - Input Mixer5 */
+ 0x0000, /* R44 - Input Mixer6 */
+ 0x0000, /* R45 - Output Mixer1 */
+ 0x0000, /* R46 - Output Mixer2 */
+ 0x0000, /* R47 - Output Mixer3 */
+ 0x0000, /* R48 - Output Mixer4 */
+ 0x0000, /* R49 - Output Mixer5 */
+ 0x0000, /* R50 - Output Mixer6 */
+ 0x0000, /* R51 - HPOUT2 Mixer */
+ 0x0000, /* R52 - Line Mixer1 */
+ 0x0000, /* R53 - Line Mixer2 */
+ 0x0000, /* R54 - Speaker Mixer */
+ 0x0000, /* R55 - Additional Control */
+ 0x0000, /* R56 - AntiPOP1 */
+ 0x0000, /* R57 - AntiPOP2 */
+ 0x0000, /* R58 - MICBIAS */
+ 0x0000, /* R59 */
+ 0x0000, /* R60 - FLL Control 1 */
+ 0x0000, /* R61 - FLL Control 2 */
+ 0x0000, /* R62 - FLL Control 3 */
+ 0x2EE0, /* R63 - FLL Control 4 */
+ 0x0002, /* R64 - FLL Control 5 */
+ 0x2287, /* R65 - Clocking 3 */
+ 0x025F, /* R66 - Clocking 4 */
+ 0x0000, /* R67 - MW Slave Control */
+ 0x0000, /* R68 */
+ 0x0002, /* R69 - Bus Control 1 */
+ 0x0000, /* R70 - Write Sequencer 0 */
+ 0x0000, /* R71 - Write Sequencer 1 */
+ 0x0000, /* R72 - Write Sequencer 2 */
+ 0x0000, /* R73 - Write Sequencer 3 */
+ 0x0000, /* R74 - Write Sequencer 4 */
+ 0x0000, /* R75 - Write Sequencer 5 */
+ 0x1F25, /* R76 - Charge Pump 1 */
+ 0x0000, /* R77 */
+ 0x0000, /* R78 */
+ 0x0000, /* R79 */
+ 0x0000, /* R80 */
+ 0x0000, /* R81 - Class W 0 */
+ 0x0000, /* R82 */
+ 0x0000, /* R83 */
+ 0x0000, /* R84 - DC Servo 0 */
+ 0x054A, /* R85 - DC Servo 1 */
+ 0x0000, /* R86 */
+ 0x0000, /* R87 - DC Servo 3 */
+ 0x0000, /* R88 - DC Servo Readback 0 */
+ 0x0000, /* R89 - DC Servo Readback 1 */
+ 0x0000, /* R90 - DC Servo Readback 2 */
+ 0x0000, /* R91 */
+ 0x0000, /* R92 */
+ 0x0000, /* R93 */
+ 0x0000, /* R94 */
+ 0x0000, /* R95 */
+ 0x0100, /* R96 - Analogue HP 0 */
+ 0x0000, /* R97 */
+ 0x0000, /* R98 - EQ1 */
+ 0x000C, /* R99 - EQ2 */
+ 0x000C, /* R100 - EQ3 */
+ 0x000C, /* R101 - EQ4 */
+ 0x000C, /* R102 - EQ5 */
+ 0x000C, /* R103 - EQ6 */
+ 0x0FCA, /* R104 - EQ7 */
+ 0x0400, /* R105 - EQ8 */
+ 0x00D8, /* R106 - EQ9 */
+ 0x1EB5, /* R107 - EQ10 */
+ 0xF145, /* R108 - EQ11 */
+ 0x0B75, /* R109 - EQ12 */
+ 0x01C5, /* R110 - EQ13 */
+ 0x1C58, /* R111 - EQ14 */
+ 0xF373, /* R112 - EQ15 */
+ 0x0A54, /* R113 - EQ16 */
+ 0x0558, /* R114 - EQ17 */
+ 0x168E, /* R115 - EQ18 */
+ 0xF829, /* R116 - EQ19 */
+ 0x07AD, /* R117 - EQ20 */
+ 0x1103, /* R118 - EQ21 */
+ 0x0564, /* R119 - EQ22 */
+ 0x0559, /* R120 - EQ23 */
+ 0x4000, /* R121 - EQ24 */
+ 0x0000, /* R122 - Digital Pulls */
+ 0x0F08, /* R123 - DRC Control 1 */
+ 0x0000, /* R124 - DRC Control 2 */
+ 0x0080, /* R125 - DRC Control 3 */
+ 0x0000, /* R126 - DRC Control 4 */
+};
+
+static struct {
+ int ratio;
+ int clk_sys_rate;
+} clk_sys_rates[] = {
+ { 64, 0 },
+ { 128, 1 },
+ { 192, 2 },
+ { 256, 3 },
+ { 384, 4 },
+ { 512, 5 },
+ { 768, 6 },
+ { 1024, 7 },
+ { 1408, 8 },
+ { 1536, 9 },
+};
+
+static struct {
+ int rate;
+ int sample_rate;
+} sample_rates[] = {
+ { 8000, 0 },
+ { 11025, 1 },
+ { 12000, 1 },
+ { 16000, 2 },
+ { 22050, 3 },
+ { 24000, 3 },
+ { 32000, 4 },
+ { 44100, 5 },
+ { 48000, 5 },
+};
+
+static struct {
+ int div; /* *10 due to .5s */
+ int bclk_div;
+} bclk_divs[] = {
+ { 10, 0 },
+ { 15, 1 },
+ { 20, 2 },
+ { 30, 3 },
+ { 40, 4 },
+ { 55, 5 },
+ { 60, 6 },
+ { 80, 7 },
+ { 110, 8 },
+ { 120, 9 },
+ { 160, 10 },
+ { 220, 11 },
+ { 240, 12 },
+ { 320, 13 },
+ { 440, 14 },
+ { 480, 15 },
+};
+
+struct wm8993_priv {
+ u16 reg_cache[WM8993_REGISTER_COUNT];
+ struct wm8993_platform_data pdata;
+ struct snd_soc_codec codec;
+ int master;
+ int sysclk_source;
+ int tdm_slots;
+ int tdm_width;
+ unsigned int mclk_rate;
+ unsigned int sysclk_rate;
+ unsigned int fs;
+ unsigned int bclk;
+ int class_w_users;
+ unsigned int fll_fref;
+ unsigned int fll_fout;
+};
+
+static unsigned int wm8993_read_hw(struct snd_soc_codec *codec, u8 reg)
+{
+ struct i2c_msg xfer[2];
+ u16 data;
+ int ret;
+ struct i2c_client *i2c = codec->control_data;
+
+ /* Write register */
+ xfer[0].addr = i2c->addr;
+ xfer[0].flags = 0;
+ xfer[0].len = 1;
+ xfer[0].buf = ®
+
+ /* Read data */
+ xfer[1].addr = i2c->addr;
+ xfer[1].flags = I2C_M_RD;
+ xfer[1].len = 2;
+ xfer[1].buf = (u8 *)&data;
+
+ ret = i2c_transfer(i2c->adapter, xfer, 2);
+ if (ret != 2) {
+ dev_err(codec->dev, "Failed to read 0x%x: %d\n", reg, ret);
+ return 0;
+ }
+
+ return (data >> 8) | ((data & 0xff) << 8);
+}
+
+static int wm8993_volatile(unsigned int reg)
+{
+ switch (reg) {
+ case WM8993_SOFTWARE_RESET:
+ case WM8993_DC_SERVO_0:
+ case WM8993_DC_SERVO_READBACK_0:
+ case WM8993_DC_SERVO_READBACK_1:
+ case WM8993_DC_SERVO_READBACK_2:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
+static unsigned int wm8993_read(struct snd_soc_codec *codec,
+ unsigned int reg)
+{
+ u16 *reg_cache = codec->reg_cache;
+
+ BUG_ON(reg > WM8993_MAX_REGISTER);
+
+ if (wm8993_volatile(reg))
+ return wm8993_read_hw(codec, reg);
+ else
+ return reg_cache[reg];
+}
+
+static int wm8993_write(struct snd_soc_codec *codec, unsigned int reg,
+ unsigned int value)
+{
+ u16 *reg_cache = codec->reg_cache;
+ u8 data[3];
+ int ret;
+
+ BUG_ON(reg > WM8993_MAX_REGISTER);
+
+ /* data is
+ * D15..D9 WM8993 register offset
+ * D8...D0 register data
+ */
+ data[0] = reg;
+ data[1] = value >> 8;
+ data[2] = value & 0x00ff;
+
+ if (!wm8993_volatile(reg))
+ reg_cache[reg] = value;
+
+ ret = codec->hw_write(codec->control_data, data, 3);
+
+ if (ret == 3)
+ return 0;
+ if (ret < 0)
+ return ret;
+ return -EIO;
+}
+
+struct _fll_div {
+ u16 fll_fratio;
+ u16 fll_outdiv;
+ u16 fll_clk_ref_div;
+ u16 n;
+ u16 k;
+};
+
+/* The size in bits of the FLL divide multiplied by 10
+ * to allow rounding later */
+#define FIXED_FLL_SIZE ((1 << 16) * 10)
+
+static struct {
+ unsigned int min;
+ unsigned int max;
+ u16 fll_fratio;
+ int ratio;
+} fll_fratios[] = {
+ { 0, 64000, 4, 16 },
+ { 64000, 128000, 3, 8 },
+ { 128000, 256000, 2, 4 },
+ { 256000, 1000000, 1, 2 },
+ { 1000000, 13500000, 0, 1 },
+};
+
+static int fll_factors(struct _fll_div *fll_div, unsigned int Fref,
+ unsigned int Fout)
+{
+ u64 Kpart;
+ unsigned int K, Ndiv, Nmod, target;
+ unsigned int div;
+ int i;
+
+ /* Fref must be <=13.5MHz */
+ div = 1;
+ fll_div->fll_clk_ref_div = 0;
+ while ((Fref / div) > 13500000) {
+ div *= 2;
+ fll_div->fll_clk_ref_div++;
+
+ if (div > 8) {
+ pr_err("Can't scale %dMHz input down to <=13.5MHz\n",
+ Fref);
+ return -EINVAL;
+ }
+ }
+
+ pr_debug("Fref=%u Fout=%u\n", Fref, Fout);
+
+ /* Apply the division for our remaining calculations */
+ Fref /= div;
+
+ /* Fvco should be 90-100MHz; don't check the upper bound */
+ div = 0;
+ target = Fout * 2;
+ while (target < 90000000) {
+ div++;
+ target *= 2;
+ if (div > 7) {
+ pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n",
+ Fout);
+ return -EINVAL;
+ }
+ }
+ fll_div->fll_outdiv = div;
+
+ pr_debug("Fvco=%dHz\n", target);
+
+ /* Find an appropraite FLL_FRATIO and factor it out of the target */
+ for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) {
+ if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) {
+ fll_div->fll_fratio = fll_fratios[i].fll_fratio;
+ target /= fll_fratios[i].ratio;
+ break;
+ }
+ }
+ if (i == ARRAY_SIZE(fll_fratios)) {
+ pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref);
+ return -EINVAL;
+ }
+
+ /* Now, calculate N.K */
+ Ndiv = target / Fref;
+
+ fll_div->n = Ndiv;
+ Nmod = target % Fref;
+ pr_debug("Nmod=%d\n", Nmod);
+
+ /* Calculate fractional part - scale up so we can round. */
+ Kpart = FIXED_FLL_SIZE * (long long)Nmod;
+
+ do_div(Kpart, Fref);
+
+ K = Kpart & 0xFFFFFFFF;
+
+ if ((K % 10) >= 5)
+ K += 5;
+
+ /* Move down to proper range now rounding is done */
+ fll_div->k = K / 10;
+
+ pr_debug("N=%x K=%x FLL_FRATIO=%x FLL_OUTDIV=%x FLL_CLK_REF_DIV=%x\n",
+ fll_div->n, fll_div->k,
+ fll_div->fll_fratio, fll_div->fll_outdiv,
+ fll_div->fll_clk_ref_div);
+
+ return 0;
+}
+
+static int wm8993_set_fll(struct snd_soc_dai *dai, int fll_id,
+ unsigned int Fref, unsigned int Fout)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct wm8993_priv *wm8993 = codec->private_data;
+ u16 reg1, reg4, reg5;
+ struct _fll_div fll_div;
+ int ret;
+
+ /* Any change? */
+ if (Fref == wm8993->fll_fref && Fout == wm8993->fll_fout)
+ return 0;
+
+ /* Disable the FLL */
+ if (Fout == 0) {
+ dev_dbg(codec->dev, "FLL disabled\n");
+ wm8993->fll_fref = 0;
+ wm8993->fll_fout = 0;
+
+ reg1 = wm8993_read(codec, WM8993_FLL_CONTROL_1);
+ reg1 &= ~WM8993_FLL_ENA;
+ wm8993_write(codec, WM8993_FLL_CONTROL_1, reg1);
+
+ return 0;
+ }
+
+ ret = fll_factors(&fll_div, Fref, Fout);
+ if (ret != 0)
+ return ret;
+
+ reg5 = wm8993_read(codec, WM8993_FLL_CONTROL_5);
+ reg5 &= ~WM8993_FLL_CLK_SRC_MASK;
+
+ switch (fll_id) {
+ case WM8993_FLL_MCLK:
+ break;
+
+ case WM8993_FLL_LRCLK:
+ reg5 |= 1;
+ break;
+
+ case WM8993_FLL_BCLK:
+ reg5 |= 2;
+ break;
+
+ default:
+ dev_err(codec->dev, "Unknown FLL ID %d\n", fll_id);
+ return -EINVAL;
+ }
+
+ /* Any FLL configuration change requires that the FLL be
+ * disabled first. */
+ reg1 = wm8993_read(codec, WM8993_FLL_CONTROL_1);
+ reg1 &= ~WM8993_FLL_ENA;
+ wm8993_write(codec, WM8993_FLL_CONTROL_1, reg1);
+
+ /* Apply the configuration */
+ if (fll_div.k)
+ reg1 |= WM8993_FLL_FRAC_MASK;
+ else
+ reg1 &= ~WM8993_FLL_FRAC_MASK;
+ wm8993_write(codec, WM8993_FLL_CONTROL_1, reg1);
+
+ wm8993_write(codec, WM8993_FLL_CONTROL_2,
+ (fll_div.fll_outdiv << WM8993_FLL_OUTDIV_SHIFT) |
+ (fll_div.fll_fratio << WM8993_FLL_FRATIO_SHIFT));
+ wm8993_write(codec, WM8993_FLL_CONTROL_3, fll_div.k);
+
+ reg4 = wm8993_read(codec, WM8993_FLL_CONTROL_4);
+ reg4 &= ~WM8993_FLL_N_MASK;
+ reg4 |= fll_div.n << WM8993_FLL_N_SHIFT;
+ wm8993_write(codec, WM8993_FLL_CONTROL_4, reg4);
+
+ reg5 &= ~WM8993_FLL_CLK_REF_DIV_MASK;
+ reg5 |= fll_div.fll_clk_ref_div << WM8993_FLL_CLK_REF_DIV_SHIFT;
+ wm8993_write(codec, WM8993_FLL_CONTROL_5, reg5);
+
+ /* Enable the FLL */
+ wm8993_write(codec, WM8993_FLL_CONTROL_1, reg1 | WM8993_FLL_ENA);
+
+ dev_dbg(codec->dev, "FLL enabled at %dHz->%dHz\n", Fref, Fout);
+
+ wm8993->fll_fref = Fref;
+ wm8993->fll_fout = Fout;
+
+ return 0;
+}
+
+static int configure_clock(struct snd_soc_codec *codec)
+{
+ struct wm8993_priv *wm8993 = codec->private_data;
+ unsigned int reg;
+
+ /* This should be done on init() for bypass paths */
+ switch (wm8993->sysclk_source) {
+ case WM8993_SYSCLK_MCLK:
+ dev_dbg(codec->dev, "Using %dHz MCLK\n", wm8993->mclk_rate);
+
+ reg = wm8993_read(codec, WM8993_CLOCKING_2);
+ reg &= ~(WM8993_MCLK_DIV | WM8993_SYSCLK_SRC);
+ if (wm8993->mclk_rate > 13500000) {
+ reg |= WM8993_MCLK_DIV;
+ wm8993->sysclk_rate = wm8993->mclk_rate / 2;
+ } else {
+ reg &= ~WM8993_MCLK_DIV;
+ wm8993->sysclk_rate = wm8993->mclk_rate;
+ }
+ wm8993_write(codec, WM8993_CLOCKING_2, reg);
+ break;
+
+ case WM8993_SYSCLK_FLL:
+ dev_dbg(codec->dev, "Using %dHz FLL clock\n",
+ wm8993->fll_fout);
+
+ reg = wm8993_read(codec, WM8993_CLOCKING_2);
+ reg |= WM8993_SYSCLK_SRC;
+ if (wm8993->fll_fout > 13500000) {
+ reg |= WM8993_MCLK_DIV;
+ wm8993->sysclk_rate = wm8993->fll_fout / 2;
+ } else {
+ reg &= ~WM8993_MCLK_DIV;
+ wm8993->sysclk_rate = wm8993->fll_fout;
+ }
+ wm8993_write(codec, WM8993_CLOCKING_2, reg);
+ break;
+
+ default:
+ dev_err(codec->dev, "System clock not configured\n");
+ return -EINVAL;
+ }
+
+ dev_dbg(codec->dev, "CLK_SYS is %dHz\n", wm8993->sysclk_rate);
+
+ return 0;
+}
+
+static const DECLARE_TLV_DB_SCALE(sidetone_tlv, -3600, 300, 0);
+static const DECLARE_TLV_DB_SCALE(drc_comp_threash, -4500, 75, 0);
+static const DECLARE_TLV_DB_SCALE(drc_comp_amp, -2250, 75, 0);
+static const DECLARE_TLV_DB_SCALE(drc_min_tlv, -1800, 600, 0);
+static const unsigned int drc_max_tlv[] = {
+ TLV_DB_RANGE_HEAD(4),
+ 0, 2, TLV_DB_SCALE_ITEM(1200, 600, 0),
+ 3, 3, TLV_DB_SCALE_ITEM(3600, 0, 0),
+};
+static const DECLARE_TLV_DB_SCALE(drc_qr_tlv, 1200, 600, 0);
+static const DECLARE_TLV_DB_SCALE(drc_startup_tlv, -1800, 300, 0);
+static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
+static const DECLARE_TLV_DB_SCALE(digital_tlv, -7200, 75, 1);
+static const DECLARE_TLV_DB_SCALE(dac_boost_tlv, 0, 600, 0);
+
+static const char *dac_deemph_text[] = {
+ "None",
+ "32kHz",
+ "44.1kHz",
+ "48kHz",
+};
+
+static const struct soc_enum dac_deemph =
+ SOC_ENUM_SINGLE(WM8993_DAC_CTRL, 4, 4, dac_deemph_text);
+
+static const char *adc_hpf_text[] = {
+ "Hi-Fi",
+ "Voice 1",
+ "Voice 2",
+ "Voice 3",
+};
+
+static const struct soc_enum adc_hpf =
+ SOC_ENUM_SINGLE(WM8993_ADC_CTRL, 5, 4, adc_hpf_text);
+
+static const char *drc_path_text[] = {
+ "ADC",
+ "DAC"
+};
+
+static const struct soc_enum drc_path =
+ SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_1, 14, 2, drc_path_text);
+
+static const char *drc_r0_text[] = {
+ "1",
+ "1/2",
+ "1/4",
+ "1/8",
+ "1/16",
+ "0",
+};
+
+static const struct soc_enum drc_r0 =
+ SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_3, 8, 6, drc_r0_text);
+
+static const char *drc_r1_text[] = {
+ "1",
+ "1/2",
+ "1/4",
+ "1/8",
+ "0",
+};
+
+static const struct soc_enum drc_r1 =
+ SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_4, 13, 5, drc_r1_text);
+
+static const char *drc_attack_text[] = {
+ "Reserved",
+ "181us",
+ "363us",
+ "726us",
+ "1.45ms",
+ "2.9ms",
+ "5.8ms",
+ "11.6ms",
+ "23.2ms",
+ "46.4ms",
+ "92.8ms",
+ "185.6ms",
+};
+
+static const struct soc_enum drc_attack =
+ SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_2, 12, 12, drc_attack_text);
+
+static const char *drc_decay_text[] = {
+ "186ms",
+ "372ms",
+ "743ms",
+ "1.49s",
+ "2.97ms",
+ "5.94ms",
+ "11.89ms",
+ "23.78ms",
+ "47.56ms",
+};
+
+static const struct soc_enum drc_decay =
+ SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_2, 8, 9, drc_decay_text);
+
+static const char *drc_ff_text[] = {
+ "5 samples",
+ "9 samples",
+};
+
+static const struct soc_enum drc_ff =
+ SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_3, 7, 2, drc_ff_text);
+
+static const char *drc_qr_rate_text[] = {
+ "0.725ms",
+ "1.45ms",
+ "5.8ms",
+};
+
+static const struct soc_enum drc_qr_rate =
+ SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_3, 0, 3, drc_qr_rate_text);
+
+static const char *drc_smooth_text[] = {
+ "Low",
+ "Medium",
+ "High",
+};
+
+static const struct soc_enum drc_smooth =
+ SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_1, 4, 3, drc_smooth_text);
+
+static const struct snd_kcontrol_new wm8993_snd_controls[] = {
+SOC_DOUBLE_TLV("Digital Sidetone Volume", WM8993_DIGITAL_SIDE_TONE,
+ 5, 9, 12, 0, sidetone_tlv),
+
+SOC_SINGLE("DRC Switch", WM8993_DRC_CONTROL_1, 15, 1, 0),
+SOC_ENUM("DRC Path", drc_path),
+SOC_SINGLE_TLV("DRC Compressor Threashold Volume", WM8993_DRC_CONTROL_2,
+ 2, 60, 1, drc_comp_threash),
+SOC_SINGLE_TLV("DRC Compressor Amplitude Volume", WM8993_DRC_CONTROL_3,
+ 11, 30, 1, drc_comp_amp),
+SOC_ENUM("DRC R0", drc_r0),
+SOC_ENUM("DRC R1", drc_r1),
+SOC_SINGLE_TLV("DRC Minimum Volume", WM8993_DRC_CONTROL_1, 2, 3, 1,
+ drc_min_tlv),
+SOC_SINGLE_TLV("DRC Maximum Volume", WM8993_DRC_CONTROL_1, 0, 3, 0,
+ drc_max_tlv),
+SOC_ENUM("DRC Attack Rate", drc_attack),
+SOC_ENUM("DRC Decay Rate", drc_decay),
+SOC_ENUM("DRC FF Delay", drc_ff),
+SOC_SINGLE("DRC Anti-clip Switch", WM8993_DRC_CONTROL_1, 9, 1, 0),
+SOC_SINGLE("DRC Quick Release Switch", WM8993_DRC_CONTROL_1, 10, 1, 0),
+SOC_SINGLE_TLV("DRC Quick Release Volume", WM8993_DRC_CONTROL_3, 2, 3, 0,
+ drc_qr_tlv),
+SOC_ENUM("DRC Quick Release Rate", drc_qr_rate),
+SOC_SINGLE("DRC Smoothing Switch", WM8993_DRC_CONTROL_1, 11, 1, 0),
+SOC_SINGLE("DRC Smoothing Hysteresis Switch", WM8993_DRC_CONTROL_1, 8, 1, 0),
+SOC_ENUM("DRC Smoothing Hysteresis Threashold", drc_smooth),
+SOC_SINGLE_TLV("DRC Startup Volume", WM8993_DRC_CONTROL_4, 8, 18, 0,
+ drc_startup_tlv),
+
+SOC_SINGLE("EQ Switch", WM8993_EQ1, 0, 1, 0),
+
+SOC_DOUBLE_R_TLV("Capture Volume", WM8993_LEFT_ADC_DIGITAL_VOLUME,
+ WM8993_RIGHT_ADC_DIGITAL_VOLUME, 1, 96, 0, digital_tlv),
+SOC_SINGLE("ADC High Pass Filter Switch", WM8993_ADC_CTRL, 8, 1, 0),
+SOC_ENUM("ADC High Pass Filter Mode", adc_hpf),
+
+SOC_DOUBLE_R_TLV("Playback Volume", WM8993_LEFT_DAC_DIGITAL_VOLUME,
+ WM8993_RIGHT_DAC_DIGITAL_VOLUME, 1, 96, 0, digital_tlv),
+SOC_SINGLE_TLV("Playback Boost Volume", WM8993_AUDIO_INTERFACE_2, 10, 3, 0,
+ dac_boost_tlv),
+SOC_ENUM("DAC Deemphasis", dac_deemph),
+
+SOC_SINGLE_TLV("SPKL DAC Volume", WM8993_SPKMIXL_ATTENUATION,
+ 2, 1, 1, wm_hubs_spkmix_tlv),
+
+SOC_SINGLE_TLV("SPKR DAC Volume", WM8993_SPKMIXR_ATTENUATION,
+ 2, 1, 1, wm_hubs_spkmix_tlv),
+};
+
+static const struct snd_kcontrol_new wm8993_eq_controls[] = {
+SOC_SINGLE_TLV("EQ1 Volume", WM8993_EQ2, 0, 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ2 Volume", WM8993_EQ3, 0, 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ3 Volume", WM8993_EQ4, 0, 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ4 Volume", WM8993_EQ5, 0, 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ5 Volume", WM8993_EQ6, 0, 24, 0, eq_tlv),
+};
+
+static int clk_sys_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+
+ switch (event) {
+ case SND_SOC_DAPM_PRE_PMU:
+ return configure_clock(codec);
+
+ case SND_SOC_DAPM_POST_PMD:
+ break;
+ }
+
+ return 0;
+}
+
+/*
+ * When used with DAC outputs only the WM8993 charge pump supports
+ * operation in class W mode, providing very low power consumption
+ * when used with digital sources. Enable and disable this mode
+ * automatically depending on the mixer configuration.
+ *
+ * Currently the only supported paths are the direct DAC->headphone
+ * paths (which provide minimum power consumption anyway).
+ */
+static int class_w_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol);
+ struct snd_soc_codec *codec = widget->codec;
+ struct wm8993_priv *wm8993 = codec->private_data;
+ int ret;
+
+ /* Turn it off if we're using the main output mixer */
+ if (ucontrol->value.integer.value[0] == 0) {
+ if (wm8993->class_w_users == 0) {
+ dev_dbg(codec->dev, "Disabling Class W\n");
+ snd_soc_update_bits(codec, WM8993_CLASS_W_0,
+ WM8993_CP_DYN_FREQ |
+ WM8993_CP_DYN_V,
+ 0);
+ }
+ wm8993->class_w_users++;
+ }
+
+ /* Implement the change */
+ ret = snd_soc_dapm_put_enum_double(kcontrol, ucontrol);
+
+ /* Enable it if we're using the direct DAC path */
+ if (ucontrol->value.integer.value[0] == 1) {
+ if (wm8993->class_w_users == 1) {
+ dev_dbg(codec->dev, "Enabling Class W\n");
+ snd_soc_update_bits(codec, WM8993_CLASS_W_0,
+ WM8993_CP_DYN_FREQ |
+ WM8993_CP_DYN_V,
+ WM8993_CP_DYN_FREQ |
+ WM8993_CP_DYN_V);
+ }
+ wm8993->class_w_users--;
+ }
+
+ dev_dbg(codec->dev, "Indirect DAC use count now %d\n",
+ wm8993->class_w_users);
+
+ return ret;
+}
+
+#define SOC_DAPM_ENUM_W(xname, xenum) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
+ .info = snd_soc_info_enum_double, \
+ .get = snd_soc_dapm_get_enum_double, \
+ .put = class_w_put, \
+ .private_value = (unsigned long)&xenum }
+
+static const char *hp_mux_text[] = {
+ "Mixer",
+ "DAC",
+};
+
+static const struct soc_enum hpl_enum =
+ SOC_ENUM_SINGLE(WM8993_OUTPUT_MIXER1, 8, 2, hp_mux_text);
+
+static const struct snd_kcontrol_new hpl_mux =
+ SOC_DAPM_ENUM_W("Left Headphone Mux", hpl_enum);
+
+static const struct soc_enum hpr_enum =
+ SOC_ENUM_SINGLE(WM8993_OUTPUT_MIXER2, 8, 2, hp_mux_text);
+
+static const struct snd_kcontrol_new hpr_mux =
+ SOC_DAPM_ENUM_W("Right Headphone Mux", hpr_enum);
+
+static const struct snd_kcontrol_new left_speaker_mixer[] = {
+SOC_DAPM_SINGLE("Input Switch", WM8993_SPEAKER_MIXER, 7, 1, 0),
+SOC_DAPM_SINGLE("IN1LP Switch", WM8993_SPEAKER_MIXER, 5, 1, 0),
+SOC_DAPM_SINGLE("Output Switch", WM8993_SPEAKER_MIXER, 3, 1, 0),
+SOC_DAPM_SINGLE("DAC Switch", WM8993_SPEAKER_MIXER, 6, 1, 0),
+};
+
+static const struct snd_kcontrol_new right_speaker_mixer[] = {
+SOC_DAPM_SINGLE("Input Switch", WM8993_SPEAKER_MIXER, 6, 1, 0),
+SOC_DAPM_SINGLE("IN1RP Switch", WM8993_SPEAKER_MIXER, 4, 1, 0),
+SOC_DAPM_SINGLE("Output Switch", WM8993_SPEAKER_MIXER, 2, 1, 0),
+SOC_DAPM_SINGLE("DAC Switch", WM8993_SPEAKER_MIXER, 0, 1, 0),
+};
+
+static const char *aif_text[] = {
+ "Left", "Right"
+};
+
+static const struct soc_enum aifoutl_enum =
+ SOC_ENUM_SINGLE(WM8993_AUDIO_INTERFACE_1, 15, 2, aif_text);
+
+static const struct snd_kcontrol_new aifoutl_mux =
+ SOC_DAPM_ENUM("AIFOUTL Mux", aifoutl_enum);
+
+static const struct soc_enum aifoutr_enum =
+ SOC_ENUM_SINGLE(WM8993_AUDIO_INTERFACE_1, 14, 2, aif_text);
+
+static const struct snd_kcontrol_new aifoutr_mux =
+ SOC_DAPM_ENUM("AIFOUTR Mux", aifoutr_enum);
+
+static const struct soc_enum aifinl_enum =
+ SOC_ENUM_SINGLE(WM8993_AUDIO_INTERFACE_2, 15, 2, aif_text);
+
+static const struct snd_kcontrol_new aifinl_mux =
+ SOC_DAPM_ENUM("AIFINL Mux", aifinl_enum);
+
+static const struct soc_enum aifinr_enum =
+ SOC_ENUM_SINGLE(WM8993_AUDIO_INTERFACE_2, 14, 2, aif_text);
+
+static const struct snd_kcontrol_new aifinr_mux =
+ SOC_DAPM_ENUM("AIFINR Mux", aifinr_enum);
+
+static const char *sidetone_text[] = {
+ "None", "Left", "Right"
+};
+
+static const struct soc_enum sidetonel_enum =
+ SOC_ENUM_SINGLE(WM8993_DIGITAL_SIDE_TONE, 2, 3, sidetone_text);
+
+static const struct snd_kcontrol_new sidetonel_mux =
+ SOC_DAPM_ENUM("Left Sidetone", sidetonel_enum);
+
+static const struct soc_enum sidetoner_enum =
+ SOC_ENUM_SINGLE(WM8993_DIGITAL_SIDE_TONE, 0, 3, sidetone_text);
+
+static const struct snd_kcontrol_new sidetoner_mux =
+ SOC_DAPM_ENUM("Right Sidetone", sidetoner_enum);
+
+static const struct snd_soc_dapm_widget wm8993_dapm_widgets[] = {
+SND_SOC_DAPM_SUPPLY("CLK_SYS", WM8993_BUS_CONTROL_1, 1, 0, clk_sys_event,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+SND_SOC_DAPM_SUPPLY("TOCLK", WM8993_CLOCKING_1, 14, 0, NULL, 0),
+SND_SOC_DAPM_SUPPLY("CLK_DSP", WM8993_CLOCKING_3, 0, 0, NULL, 0),
+
+SND_SOC_DAPM_ADC("ADCL", NULL, WM8993_POWER_MANAGEMENT_2, 1, 0),
+SND_SOC_DAPM_ADC("ADCR", NULL, WM8993_POWER_MANAGEMENT_2, 0, 0),
+
+SND_SOC_DAPM_MUX("AIFOUTL Mux", SND_SOC_NOPM, 0, 0, &aifoutl_mux),
+SND_SOC_DAPM_MUX("AIFOUTR Mux", SND_SOC_NOPM, 0, 0, &aifoutr_mux),
+
+SND_SOC_DAPM_AIF_OUT("AIFOUTL", "Capture", 0, SND_SOC_NOPM, 0, 0),
+SND_SOC_DAPM_AIF_OUT("AIFOUTR", "Capture", 1, SND_SOC_NOPM, 0, 0),
+
+SND_SOC_DAPM_AIF_IN("AIFINL", "Playback", 0, SND_SOC_NOPM, 0, 0),
+SND_SOC_DAPM_AIF_IN("AIFINR", "Playback", 1, SND_SOC_NOPM, 0, 0),
+
+SND_SOC_DAPM_MUX("DACL Mux", SND_SOC_NOPM, 0, 0, &aifinl_mux),
+SND_SOC_DAPM_MUX("DACR Mux", SND_SOC_NOPM, 0, 0, &aifinr_mux),
+
+SND_SOC_DAPM_MUX("DACL Sidetone", SND_SOC_NOPM, 0, 0, &sidetonel_mux),
+SND_SOC_DAPM_MUX("DACR Sidetone", SND_SOC_NOPM, 0, 0, &sidetoner_mux),
+
+SND_SOC_DAPM_DAC("DACL", NULL, WM8993_POWER_MANAGEMENT_3, 1, 0),
+SND_SOC_DAPM_DAC("DACR", NULL, WM8993_POWER_MANAGEMENT_3, 0, 0),
+
+SND_SOC_DAPM_MUX("Left Headphone Mux", SND_SOC_NOPM, 0, 0, &hpl_mux),
+SND_SOC_DAPM_MUX("Right Headphone Mux", SND_SOC_NOPM, 0, 0, &hpr_mux),
+
+SND_SOC_DAPM_MIXER("SPKL", WM8993_POWER_MANAGEMENT_3, 8, 0,
+ left_speaker_mixer, ARRAY_SIZE(left_speaker_mixer)),
+SND_SOC_DAPM_MIXER("SPKR", WM8993_POWER_MANAGEMENT_3, 9, 0,
+ right_speaker_mixer, ARRAY_SIZE(right_speaker_mixer)),
+
+};
+
+static const struct snd_soc_dapm_route routes[] = {
+ { "ADCL", NULL, "CLK_SYS" },
+ { "ADCL", NULL, "CLK_DSP" },
+ { "ADCR", NULL, "CLK_SYS" },
+ { "ADCR", NULL, "CLK_DSP" },
+
+ { "AIFOUTL Mux", "Left", "ADCL" },
+ { "AIFOUTL Mux", "Right", "ADCR" },
+ { "AIFOUTR Mux", "Left", "ADCL" },
+ { "AIFOUTR Mux", "Right", "ADCR" },
+
+ { "AIFOUTL", NULL, "AIFOUTL Mux" },
+ { "AIFOUTR", NULL, "AIFOUTR Mux" },
+
+ { "DACL Mux", "Left", "AIFINL" },
+ { "DACL Mux", "Right", "AIFINR" },
+ { "DACR Mux", "Left", "AIFINL" },
+ { "DACR Mux", "Right", "AIFINR" },
+
+ { "DACL Sidetone", "Left", "ADCL" },
+ { "DACL Sidetone", "Right", "ADCR" },
+ { "DACR Sidetone", "Left", "ADCL" },
+ { "DACR Sidetone", "Right", "ADCR" },
+
+ { "DACL", NULL, "CLK_SYS" },
+ { "DACL", NULL, "CLK_DSP" },
+ { "DACL", NULL, "DACL Mux" },
+ { "DACL", NULL, "DACL Sidetone" },
+ { "DACR", NULL, "CLK_SYS" },
+ { "DACR", NULL, "CLK_DSP" },
+ { "DACR", NULL, "DACR Mux" },
+ { "DACR", NULL, "DACR Sidetone" },
+
+ { "Left Output Mixer", "DAC Switch", "DACL" },
+
+ { "Right Output Mixer", "DAC Switch", "DACR" },
+
+ { "Left Output PGA", NULL, "CLK_SYS" },
+
+ { "Right Output PGA", NULL, "CLK_SYS" },
+
+ { "SPKL", "DAC Switch", "DACL" },
+ { "SPKL", NULL, "CLK_SYS" },
+
+ { "SPKR", "DAC Switch", "DACR" },
+ { "SPKR", NULL, "CLK_SYS" },
+
+ { "Left Headphone Mux", "DAC", "DACL" },
+ { "Right Headphone Mux", "DAC", "DACR" },
+};
+
+static int wm8993_set_bias_level(struct snd_soc_codec *codec,
+ enum snd_soc_bias_level level)
+{
+ struct wm8993_priv *wm8993 = codec->private_data;
+
+ switch (level) {
+ case SND_SOC_BIAS_ON:
+ case SND_SOC_BIAS_PREPARE:
+ /* VMID=2*40k */
+ snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
+ WM8993_VMID_SEL_MASK, 0x2);
+ snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_2,
+ WM8993_TSHUT_ENA, WM8993_TSHUT_ENA);
+ break;
+
+ case SND_SOC_BIAS_STANDBY:
+ if (codec->bias_level == SND_SOC_BIAS_OFF) {
+ /* Bring up VMID with fast soft start */
+ snd_soc_update_bits(codec, WM8993_ANTIPOP2,
+ WM8993_STARTUP_BIAS_ENA |
+ WM8993_VMID_BUF_ENA |
+ WM8993_VMID_RAMP_MASK |
+ WM8993_BIAS_SRC,
+ WM8993_STARTUP_BIAS_ENA |
+ WM8993_VMID_BUF_ENA |
+ WM8993_VMID_RAMP_MASK |
+ WM8993_BIAS_SRC);
+
+ /* If either line output is single ended we
+ * need the VMID buffer */
+ if (!wm8993->pdata.lineout1_diff ||
+ !wm8993->pdata.lineout2_diff)
+ snd_soc_update_bits(codec, WM8993_ANTIPOP1,
+ WM8993_LINEOUT_VMID_BUF_ENA,
+ WM8993_LINEOUT_VMID_BUF_ENA);
+
+ /* VMID=2*40k */
+ snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
+ WM8993_VMID_SEL_MASK |
+ WM8993_BIAS_ENA,
+ WM8993_BIAS_ENA | 0x2);
+ msleep(32);
+
+ /* Switch to normal bias */
+ snd_soc_update_bits(codec, WM8993_ANTIPOP2,
+ WM8993_BIAS_SRC |
+ WM8993_STARTUP_BIAS_ENA, 0);
+ }
+
+ /* VMID=2*240k */
+ snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
+ WM8993_VMID_SEL_MASK, 0x4);
+
+ snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_2,
+ WM8993_TSHUT_ENA, 0);
+ break;
+
+ case SND_SOC_BIAS_OFF:
+ snd_soc_update_bits(codec, WM8993_ANTIPOP1,
+ WM8993_LINEOUT_VMID_BUF_ENA, 0);
+
+ snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
+ WM8993_VMID_SEL_MASK | WM8993_BIAS_ENA,
+ 0);
+ break;
+ }
+
+ codec->bias_level = level;
+
+ return 0;
+}
+
+static int wm8993_set_sysclk(struct snd_soc_dai *codec_dai,
+ int clk_id, unsigned int freq, int dir)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ struct wm8993_priv *wm8993 = codec->private_data;
+
+ switch (clk_id) {
+ case WM8993_SYSCLK_MCLK:
+ wm8993->mclk_rate = freq;
+ case WM8993_SYSCLK_FLL:
+ wm8993->sysclk_source = clk_id;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int wm8993_set_dai_fmt(struct snd_soc_dai *dai,
+ unsigned int fmt)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct wm8993_priv *wm8993 = codec->private_data;
+ unsigned int aif1 = wm8993_read(codec, WM8993_AUDIO_INTERFACE_1);
+ unsigned int aif4 = wm8993_read(codec, WM8993_AUDIO_INTERFACE_4);
+
+ aif1 &= ~(WM8993_BCLK_DIR | WM8993_AIF_BCLK_INV |
+ WM8993_AIF_LRCLK_INV | WM8993_AIF_FMT_MASK);
+ aif4 &= ~WM8993_LRCLK_DIR;
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBS_CFS:
+ wm8993->master = 0;
+ break;
+ case SND_SOC_DAIFMT_CBS_CFM:
+ aif4 |= WM8993_LRCLK_DIR;
+ wm8993->master = 1;
+ break;
+ case SND_SOC_DAIFMT_CBM_CFS:
+ aif1 |= WM8993_BCLK_DIR;
+ wm8993->master = 1;
+ break;
+ case SND_SOC_DAIFMT_CBM_CFM:
+ aif1 |= WM8993_BCLK_DIR;
+ aif4 |= WM8993_LRCLK_DIR;
+ wm8993->master = 1;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_DSP_B:
+ aif1 |= WM8993_AIF_LRCLK_INV;
+ case SND_SOC_DAIFMT_DSP_A:
+ aif1 |= 0x18;
+ break;
+ case SND_SOC_DAIFMT_I2S:
+ aif1 |= 0x10;
+ break;
+ case SND_SOC_DAIFMT_RIGHT_J:
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ aif1 |= 0x8;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_DSP_A:
+ case SND_SOC_DAIFMT_DSP_B:
+ /* frame inversion not valid for DSP modes */
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ aif1 |= WM8993_AIF_BCLK_INV;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+
+ case SND_SOC_DAIFMT_I2S:
+ case SND_SOC_DAIFMT_RIGHT_J:
+ case SND_SOC_DAIFMT_LEFT_J:
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_IF:
+ aif1 |= WM8993_AIF_BCLK_INV | WM8993_AIF_LRCLK_INV;
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ aif1 |= WM8993_AIF_BCLK_INV;
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ aif1 |= WM8993_AIF_LRCLK_INV;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ wm8993_write(codec, WM8993_AUDIO_INTERFACE_1, aif1);
+ wm8993_write(codec, WM8993_AUDIO_INTERFACE_4, aif4);
+
+ return 0;
+}
+
+static int wm8993_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct wm8993_priv *wm8993 = codec->private_data;
+ int ret, i, best, best_val, cur_val;
+ unsigned int clocking1, clocking3, aif1, aif4;
+
+ clocking1 = wm8993_read(codec, WM8993_CLOCKING_1);
+ clocking1 &= ~WM8993_BCLK_DIV_MASK;
+
+ clocking3 = wm8993_read(codec, WM8993_CLOCKING_3);
+ clocking3 &= ~(WM8993_CLK_SYS_RATE_MASK | WM8993_SAMPLE_RATE_MASK);
+
+ aif1 = wm8993_read(codec, WM8993_AUDIO_INTERFACE_1);
+ aif1 &= ~WM8993_AIF_WL_MASK;
+
+ aif4 = wm8993_read(codec, WM8993_AUDIO_INTERFACE_4);
+ aif4 &= ~WM8993_LRCLK_RATE_MASK;
+
+ /* What BCLK do we need? */
+ wm8993->fs = params_rate(params);
+ wm8993->bclk = 2 * wm8993->fs;
+ if (wm8993->tdm_slots) {
+ dev_dbg(codec->dev, "Configuring for %d %d bit TDM slots\n",
+ wm8993->tdm_slots, wm8993->tdm_width);
+ wm8993->bclk *= wm8993->tdm_width * wm8993->tdm_slots;
+ } else {
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ wm8993->bclk *= 16;
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ wm8993->bclk *= 20;
+ aif1 |= 0x8;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ wm8993->bclk *= 24;
+ aif1 |= 0x10;
+ break;
+ case SNDRV_PCM_FORMAT_S32_LE:
+ wm8993->bclk *= 32;
+ aif1 |= 0x18;
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+
+ dev_dbg(codec->dev, "Target BCLK is %dHz\n", wm8993->bclk);
+
+ ret = configure_clock(codec);
+ if (ret != 0)
+ return ret;
+
+ /* Select nearest CLK_SYS_RATE */
+ best = 0;
+ best_val = abs((wm8993->sysclk_rate / clk_sys_rates[0].ratio)
+ - wm8993->fs);
+ for (i = 1; i < ARRAY_SIZE(clk_sys_rates); i++) {
+ cur_val = abs((wm8993->sysclk_rate /
+ clk_sys_rates[i].ratio) - wm8993->fs);;
+ if (cur_val < best_val) {
+ best = i;
+ best_val = cur_val;
+ }
+ }
+ dev_dbg(codec->dev, "Selected CLK_SYS_RATIO of %d\n",
+ clk_sys_rates[best].ratio);
+ clocking3 |= (clk_sys_rates[best].clk_sys_rate
+ << WM8993_CLK_SYS_RATE_SHIFT);
+
+ /* SAMPLE_RATE */
+ best = 0;
+ best_val = abs(wm8993->fs - sample_rates[0].rate);
+ for (i = 1; i < ARRAY_SIZE(sample_rates); i++) {
+ /* Closest match */
+ cur_val = abs(wm8993->fs - sample_rates[i].rate);
+ if (cur_val < best_val) {
+ best = i;
+ best_val = cur_val;
+ }
+ }
+ dev_dbg(codec->dev, "Selected SAMPLE_RATE of %dHz\n",
+ sample_rates[best].rate);
+ clocking3 |= (sample_rates[best].sample_rate
+ << WM8993_SAMPLE_RATE_SHIFT);
+
+ /* BCLK_DIV */
+ best = 0;
+ best_val = INT_MAX;
+ for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) {
+ cur_val = ((wm8993->sysclk_rate * 10) / bclk_divs[i].div)
+ - wm8993->bclk;
+ if (cur_val < 0) /* Table is sorted */
+ break;
+ if (cur_val < best_val) {
+ best = i;
+ best_val = cur_val;
+ }
+ }
+ wm8993->bclk = (wm8993->sysclk_rate * 10) / bclk_divs[best].div;
+ dev_dbg(codec->dev, "Selected BCLK_DIV of %d for %dHz BCLK\n",
+ bclk_divs[best].div, wm8993->bclk);
+ clocking1 |= bclk_divs[best].bclk_div << WM8993_BCLK_DIV_SHIFT;
+
+ /* LRCLK is a simple fraction of BCLK */
+ dev_dbg(codec->dev, "LRCLK_RATE is %d\n", wm8993->bclk / wm8993->fs);
+ aif4 |= wm8993->bclk / wm8993->fs;
+
+ wm8993_write(codec, WM8993_CLOCKING_1, clocking1);
+ wm8993_write(codec, WM8993_CLOCKING_3, clocking3);
+ wm8993_write(codec, WM8993_AUDIO_INTERFACE_1, aif1);
+ wm8993_write(codec, WM8993_AUDIO_INTERFACE_4, aif4);
+
+ /* ReTune Mobile? */
+ if (wm8993->pdata.num_retune_configs) {
+ u16 eq1 = wm8993_read(codec, WM8993_EQ1);
+ struct wm8993_retune_mobile_setting *s;
+
+ best = 0;
+ best_val = abs(wm8993->pdata.retune_configs[0].rate
+ - wm8993->fs);
+ for (i = 0; i < wm8993->pdata.num_retune_configs; i++) {
+ cur_val = abs(wm8993->pdata.retune_configs[i].rate
+ - wm8993->fs);
+ if (cur_val < best_val) {
+ best_val = cur_val;
+ best = i;
+ }
+ }
+ s = &wm8993->pdata.retune_configs[best];
+
+ dev_dbg(codec->dev, "ReTune Mobile %s tuned for %dHz\n",
+ s->name, s->rate);
+
+ /* Disable EQ while we reconfigure */
+ snd_soc_update_bits(codec, WM8993_EQ1, WM8993_EQ_ENA, 0);
+
+ for (i = 1; i < ARRAY_SIZE(s->config); i++)
+ wm8993_write(codec, WM8993_EQ1 + i, s->config[i]);
+
+ snd_soc_update_bits(codec, WM8993_EQ1, WM8993_EQ_ENA, eq1);
+ }
+
+ return 0;
+}
+
+static int wm8993_digital_mute(struct snd_soc_dai *codec_dai, int mute)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ unsigned int reg;
+
+ reg = wm8993_read(codec, WM8993_DAC_CTRL);
+
+ if (mute)
+ reg |= WM8993_DAC_MUTE;
+ else
+ reg &= ~WM8993_DAC_MUTE;
+
+ wm8993_write(codec, WM8993_DAC_CTRL, reg);
+
+ return 0;
+}
+
+static int wm8993_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,
+ unsigned int rx_mask, int slots, int slot_width)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct wm8993_priv *wm8993 = codec->private_data;
+ int aif1 = 0;
+ int aif2 = 0;
+
+ /* Don't need to validate anything if we're turning off TDM */
+ if (slots == 0) {
+ wm8993->tdm_slots = 0;
+ goto out;
+ }
+
+ /* Note that we allow configurations we can't handle ourselves -
+ * for example, we can generate clocks for slots 2 and up even if
+ * we can't use those slots ourselves.
+ */
+ aif1 |= WM8993_AIFADC_TDM;
+ aif2 |= WM8993_AIFDAC_TDM;
+
+ switch (rx_mask) {
+ case 3:
+ break;
+ case 0xc:
+ aif1 |= WM8993_AIFADC_TDM_CHAN;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+
+ switch (tx_mask) {
+ case 3:
+ break;
+ case 0xc:
+ aif2 |= WM8993_AIFDAC_TDM_CHAN;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+out:
+ wm8993->tdm_width = slot_width;
+ wm8993->tdm_slots = slots / 2;
+
+ snd_soc_update_bits(codec, WM8993_AUDIO_INTERFACE_1,
+ WM8993_AIFADC_TDM | WM8993_AIFADC_TDM_CHAN, aif1);
+ snd_soc_update_bits(codec, WM8993_AUDIO_INTERFACE_2,
+ WM8993_AIFDAC_TDM | WM8993_AIFDAC_TDM_CHAN, aif2);
+
+ return 0;
+}
+
+static struct snd_soc_dai_ops wm8993_ops = {
+ .set_sysclk = wm8993_set_sysclk,
+ .set_fmt = wm8993_set_dai_fmt,
+ .hw_params = wm8993_hw_params,
+ .digital_mute = wm8993_digital_mute,
+ .set_pll = wm8993_set_fll,
+ .set_tdm_slot = wm8993_set_tdm_slot,
+};
+
+#define WM8993_RATES SNDRV_PCM_RATE_8000_48000
+
+#define WM8993_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
+ SNDRV_PCM_FMTBIT_S20_3LE |\
+ SNDRV_PCM_FMTBIT_S24_LE |\
+ SNDRV_PCM_FMTBIT_S32_LE)
+
+struct snd_soc_dai wm8993_dai = {
+ .name = "WM8993",
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = WM8993_RATES,
+ .formats = WM8993_FORMATS,
+ },
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = WM8993_RATES,
+ .formats = WM8993_FORMATS,
+ },
+ .ops = &wm8993_ops,
+ .symmetric_rates = 1,
+};
+EXPORT_SYMBOL_GPL(wm8993_dai);
+
+static struct snd_soc_codec *wm8993_codec;
+
+static int wm8993_probe(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec;
+ struct wm8993_priv *wm8993;
+ int ret = 0;
+
+ if (!wm8993_codec) {
+ dev_err(&pdev->dev, "I2C device not yet probed\n");
+ goto err;
+ }
+
+ socdev->card->codec = wm8993_codec;
+ codec = wm8993_codec;
+ wm8993 = codec->private_data;
+
+ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+ if (ret < 0) {
+ dev_err(codec->dev, "failed to create pcms\n");
+ goto err;
+ }
+
+ snd_soc_add_controls(codec, wm8993_snd_controls,
+ ARRAY_SIZE(wm8993_snd_controls));
+ if (wm8993->pdata.num_retune_configs != 0) {
+ dev_dbg(codec->dev, "Using ReTune Mobile\n");
+ } else {
+ dev_dbg(codec->dev, "No ReTune Mobile, using normal EQ\n");
+ snd_soc_add_controls(codec, wm8993_eq_controls,
+ ARRAY_SIZE(wm8993_eq_controls));
+ }
+
+ snd_soc_dapm_new_controls(codec, wm8993_dapm_widgets,
+ ARRAY_SIZE(wm8993_dapm_widgets));
+ wm_hubs_add_analogue_controls(codec);
+
+ snd_soc_dapm_add_routes(codec, routes, ARRAY_SIZE(routes));
+ wm_hubs_add_analogue_routes(codec, wm8993->pdata.lineout1_diff,
+ wm8993->pdata.lineout2_diff);
+
+ snd_soc_dapm_new_widgets(codec);
+
+ ret = snd_soc_init_card(socdev);
+ if (ret < 0) {
+ dev_err(codec->dev, "failed to register card\n");
+ goto card_err;
+ }
+
+ return ret;
+
+card_err:
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+err:
+ return ret;
+}
+
+static int wm8993_remove(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+
+ return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_wm8993 = {
+ .probe = wm8993_probe,
+ .remove = wm8993_remove,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm8993);
+
+static int wm8993_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct wm8993_priv *wm8993;
+ struct snd_soc_codec *codec;
+ unsigned int val;
+ int ret;
+
+ if (wm8993_codec) {
+ dev_err(&i2c->dev, "A WM8993 is already registered\n");
+ return -EINVAL;
+ }
+
+ wm8993 = kzalloc(sizeof(struct wm8993_priv), GFP_KERNEL);
+ if (wm8993 == NULL)
+ return -ENOMEM;
+
+ codec = &wm8993->codec;
+ if (i2c->dev.platform_data)
+ memcpy(&wm8993->pdata, i2c->dev.platform_data,
+ sizeof(wm8993->pdata));
+
+ mutex_init(&codec->mutex);
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
+
+ codec->name = "WM8993";
+ codec->read = wm8993_read;
+ codec->write = wm8993_write;
+ codec->hw_write = (hw_write_t)i2c_master_send;
+ codec->reg_cache = wm8993->reg_cache;
+ codec->reg_cache_size = ARRAY_SIZE(wm8993->reg_cache);
+ codec->bias_level = SND_SOC_BIAS_OFF;
+ codec->set_bias_level = wm8993_set_bias_level;
+ codec->dai = &wm8993_dai;
+ codec->num_dai = 1;
+ codec->private_data = wm8993;
+
+ memcpy(wm8993->reg_cache, wm8993_reg_defaults,
+ sizeof(wm8993->reg_cache));
+
+ i2c_set_clientdata(i2c, wm8993);
+ codec->control_data = i2c;
+ wm8993_codec = codec;
+
+ codec->dev = &i2c->dev;
+
+ val = wm8993_read_hw(codec, WM8993_SOFTWARE_RESET);
+ if (val != wm8993_reg_defaults[WM8993_SOFTWARE_RESET]) {
+ dev_err(codec->dev, "Invalid ID register value %x\n", val);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ ret = wm8993_write(codec, WM8993_SOFTWARE_RESET, 0xffff);
+ if (ret != 0)
+ goto err;
+
+ /* By default we're using the output mixers */
+ wm8993->class_w_users = 2;
+
+ /* Latch volume update bits and default ZC on */
+ snd_soc_update_bits(codec, WM8993_RIGHT_DAC_DIGITAL_VOLUME,
+ WM8993_DAC_VU, WM8993_DAC_VU);
+ snd_soc_update_bits(codec, WM8993_RIGHT_ADC_DIGITAL_VOLUME,
+ WM8993_ADC_VU, WM8993_ADC_VU);
+
+ /* Manualy manage the HPOUT sequencing for independent stereo
+ * control. */
+ snd_soc_update_bits(codec, WM8993_ANALOGUE_HP_0,
+ WM8993_HPOUT1_AUTO_PU, 0);
+
+ /* Use automatic clock configuration */
+ snd_soc_update_bits(codec, WM8993_CLOCKING_4, WM8993_SR_MODE, 0);
+
+ if (!wm8993->pdata.lineout1_diff)
+ snd_soc_update_bits(codec, WM8993_LINE_MIXER1,
+ WM8993_LINEOUT1_MODE,
+ WM8993_LINEOUT1_MODE);
+ if (!wm8993->pdata.lineout2_diff)
+ snd_soc_update_bits(codec, WM8993_LINE_MIXER2,
+ WM8993_LINEOUT2_MODE,
+ WM8993_LINEOUT2_MODE);
+
+ if (wm8993->pdata.lineout1fb)
+ snd_soc_update_bits(codec, WM8993_ADDITIONAL_CONTROL,
+ WM8993_LINEOUT1_FB, WM8993_LINEOUT1_FB);
+
+ if (wm8993->pdata.lineout2fb)
+ snd_soc_update_bits(codec, WM8993_ADDITIONAL_CONTROL,
+ WM8993_LINEOUT2_FB, WM8993_LINEOUT2_FB);
+
+ /* Apply the microphone bias/detection configuration - the
+ * platform data is directly applicable to the register. */
+ snd_soc_update_bits(codec, WM8993_MICBIAS,
+ WM8993_JD_SCTHR_MASK | WM8993_JD_THR_MASK |
+ WM8993_MICB1_LVL | WM8993_MICB2_LVL,
+ wm8993->pdata.jd_scthr << WM8993_JD_SCTHR_SHIFT |
+ wm8993->pdata.jd_thr << WM8993_JD_THR_SHIFT |
+ wm8993->pdata.micbias1_lvl |
+ wm8993->pdata.micbias1_lvl << 1);
+
+ ret = wm8993_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+ if (ret != 0)
+ goto err;
+
+ wm8993_dai.dev = codec->dev;
+
+ ret = snd_soc_register_dai(&wm8993_dai);
+ if (ret != 0)
+ goto err_bias;
+
+ ret = snd_soc_register_codec(codec);
+
+ return 0;
+
+err_bias:
+ wm8993_set_bias_level(codec, SND_SOC_BIAS_OFF);
+err:
+ wm8993_codec = NULL;
+ kfree(wm8993);
+ return ret;
+}
+
+static int wm8993_i2c_remove(struct i2c_client *client)
+{
+ struct wm8993_priv *wm8993 = i2c_get_clientdata(client);
+
+ snd_soc_unregister_codec(&wm8993->codec);
+ snd_soc_unregister_dai(&wm8993_dai);
+
+ wm8993_set_bias_level(&wm8993->codec, SND_SOC_BIAS_OFF);
+ kfree(wm8993);
+
+ return 0;
+}
+
+static const struct i2c_device_id wm8993_i2c_id[] = {
+ { "wm8993", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, wm8993_i2c_id);
+
+static struct i2c_driver wm8993_i2c_driver = {
+ .driver = {
+ .name = "WM8993",
+ .owner = THIS_MODULE,
+ },
+ .probe = wm8993_i2c_probe,
+ .remove = wm8993_i2c_remove,
+ .id_table = wm8993_i2c_id,
+};
+
+
+static int __init wm8993_modinit(void)
+{
+ int ret;
+
+ ret = i2c_add_driver(&wm8993_i2c_driver);
+ if (ret != 0)
+ pr_err("WM8993: Unable to register I2C driver: %d\n", ret);
+
+ return ret;
+}
+module_init(wm8993_modinit);
+
+static void __exit wm8993_exit(void)
+{
+ i2c_del_driver(&wm8993_i2c_driver);
+}
+module_exit(wm8993_exit);
+
+
+MODULE_DESCRIPTION("ASoC WM8993 driver");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");
--- /dev/null
+#ifndef WM8993_H
+#define WM8993_H
+
+extern struct snd_soc_dai wm8993_dai;
+extern struct snd_soc_codec_device soc_codec_dev_wm8993;
+
+#define WM8993_SYSCLK_MCLK 1
+#define WM8993_SYSCLK_FLL 2
+
+#define WM8993_FLL_MCLK 1
+#define WM8993_FLL_BCLK 2
+#define WM8993_FLL_LRCLK 3
+
+/*
+ * Register values.
+ */
+#define WM8993_SOFTWARE_RESET 0x00
+#define WM8993_POWER_MANAGEMENT_1 0x01
+#define WM8993_POWER_MANAGEMENT_2 0x02
+#define WM8993_POWER_MANAGEMENT_3 0x03
+#define WM8993_AUDIO_INTERFACE_1 0x04
+#define WM8993_AUDIO_INTERFACE_2 0x05
+#define WM8993_CLOCKING_1 0x06
+#define WM8993_CLOCKING_2 0x07
+#define WM8993_AUDIO_INTERFACE_3 0x08
+#define WM8993_AUDIO_INTERFACE_4 0x09
+#define WM8993_DAC_CTRL 0x0A
+#define WM8993_LEFT_DAC_DIGITAL_VOLUME 0x0B
+#define WM8993_RIGHT_DAC_DIGITAL_VOLUME 0x0C
+#define WM8993_DIGITAL_SIDE_TONE 0x0D
+#define WM8993_ADC_CTRL 0x0E
+#define WM8993_LEFT_ADC_DIGITAL_VOLUME 0x0F
+#define WM8993_RIGHT_ADC_DIGITAL_VOLUME 0x10
+#define WM8993_GPIO_CTRL_1 0x12
+#define WM8993_GPIO1 0x13
+#define WM8993_IRQ_DEBOUNCE 0x14
+#define WM8993_GPIOCTRL_2 0x16
+#define WM8993_GPIO_POL 0x17
+#define WM8993_LEFT_LINE_INPUT_1_2_VOLUME 0x18
+#define WM8993_LEFT_LINE_INPUT_3_4_VOLUME 0x19
+#define WM8993_RIGHT_LINE_INPUT_1_2_VOLUME 0x1A
+#define WM8993_RIGHT_LINE_INPUT_3_4_VOLUME 0x1B
+#define WM8993_LEFT_OUTPUT_VOLUME 0x1C
+#define WM8993_RIGHT_OUTPUT_VOLUME 0x1D
+#define WM8993_LINE_OUTPUTS_VOLUME 0x1E
+#define WM8993_HPOUT2_VOLUME 0x1F
+#define WM8993_LEFT_OPGA_VOLUME 0x20
+#define WM8993_RIGHT_OPGA_VOLUME 0x21
+#define WM8993_SPKMIXL_ATTENUATION 0x22
+#define WM8993_SPKMIXR_ATTENUATION 0x23
+#define WM8993_SPKOUT_MIXERS 0x24
+#define WM8993_SPKOUT_BOOST 0x25
+#define WM8993_SPEAKER_VOLUME_LEFT 0x26
+#define WM8993_SPEAKER_VOLUME_RIGHT 0x27
+#define WM8993_INPUT_MIXER2 0x28
+#define WM8993_INPUT_MIXER3 0x29
+#define WM8993_INPUT_MIXER4 0x2A
+#define WM8993_INPUT_MIXER5 0x2B
+#define WM8993_INPUT_MIXER6 0x2C
+#define WM8993_OUTPUT_MIXER1 0x2D
+#define WM8993_OUTPUT_MIXER2 0x2E
+#define WM8993_OUTPUT_MIXER3 0x2F
+#define WM8993_OUTPUT_MIXER4 0x30
+#define WM8993_OUTPUT_MIXER5 0x31
+#define WM8993_OUTPUT_MIXER6 0x32
+#define WM8993_HPOUT2_MIXER 0x33
+#define WM8993_LINE_MIXER1 0x34
+#define WM8993_LINE_MIXER2 0x35
+#define WM8993_SPEAKER_MIXER 0x36
+#define WM8993_ADDITIONAL_CONTROL 0x37
+#define WM8993_ANTIPOP1 0x38
+#define WM8993_ANTIPOP2 0x39
+#define WM8993_MICBIAS 0x3A
+#define WM8993_FLL_CONTROL_1 0x3C
+#define WM8993_FLL_CONTROL_2 0x3D
+#define WM8993_FLL_CONTROL_3 0x3E
+#define WM8993_FLL_CONTROL_4 0x3F
+#define WM8993_FLL_CONTROL_5 0x40
+#define WM8993_CLOCKING_3 0x41
+#define WM8993_CLOCKING_4 0x42
+#define WM8993_MW_SLAVE_CONTROL 0x43
+#define WM8993_BUS_CONTROL_1 0x45
+#define WM8993_WRITE_SEQUENCER_0 0x46
+#define WM8993_WRITE_SEQUENCER_1 0x47
+#define WM8993_WRITE_SEQUENCER_2 0x48
+#define WM8993_WRITE_SEQUENCER_3 0x49
+#define WM8993_WRITE_SEQUENCER_4 0x4A
+#define WM8993_WRITE_SEQUENCER_5 0x4B
+#define WM8993_CHARGE_PUMP_1 0x4C
+#define WM8993_CLASS_W_0 0x51
+#define WM8993_DC_SERVO_0 0x54
+#define WM8993_DC_SERVO_1 0x55
+#define WM8993_DC_SERVO_3 0x57
+#define WM8993_DC_SERVO_READBACK_0 0x58
+#define WM8993_DC_SERVO_READBACK_1 0x59
+#define WM8993_DC_SERVO_READBACK_2 0x5A
+#define WM8993_ANALOGUE_HP_0 0x60
+#define WM8993_EQ1 0x62
+#define WM8993_EQ2 0x63
+#define WM8993_EQ3 0x64
+#define WM8993_EQ4 0x65
+#define WM8993_EQ5 0x66
+#define WM8993_EQ6 0x67
+#define WM8993_EQ7 0x68
+#define WM8993_EQ8 0x69
+#define WM8993_EQ9 0x6A
+#define WM8993_EQ10 0x6B
+#define WM8993_EQ11 0x6C
+#define WM8993_EQ12 0x6D
+#define WM8993_EQ13 0x6E
+#define WM8993_EQ14 0x6F
+#define WM8993_EQ15 0x70
+#define WM8993_EQ16 0x71
+#define WM8993_EQ17 0x72
+#define WM8993_EQ18 0x73
+#define WM8993_EQ19 0x74
+#define WM8993_EQ20 0x75
+#define WM8993_EQ21 0x76
+#define WM8993_EQ22 0x77
+#define WM8993_EQ23 0x78
+#define WM8993_EQ24 0x79
+#define WM8993_DIGITAL_PULLS 0x7A
+#define WM8993_DRC_CONTROL_1 0x7B
+#define WM8993_DRC_CONTROL_2 0x7C
+#define WM8993_DRC_CONTROL_3 0x7D
+#define WM8993_DRC_CONTROL_4 0x7E
+
+#define WM8993_REGISTER_COUNT 0x7F
+#define WM8993_MAX_REGISTER 0x7E
+
+/*
+ * Field Definitions.
+ */
+
+/*
+ * R0 (0x00) - Software Reset
+ */
+#define WM8993_SW_RESET_MASK 0xFFFF /* SW_RESET - [15:0] */
+#define WM8993_SW_RESET_SHIFT 0 /* SW_RESET - [15:0] */
+#define WM8993_SW_RESET_WIDTH 16 /* SW_RESET - [15:0] */
+
+/*
+ * R1 (0x01) - Power Management (1)
+ */
+#define WM8993_SPKOUTR_ENA 0x2000 /* SPKOUTR_ENA */
+#define WM8993_SPKOUTR_ENA_MASK 0x2000 /* SPKOUTR_ENA */
+#define WM8993_SPKOUTR_ENA_SHIFT 13 /* SPKOUTR_ENA */
+#define WM8993_SPKOUTR_ENA_WIDTH 1 /* SPKOUTR_ENA */
+#define WM8993_SPKOUTL_ENA 0x1000 /* SPKOUTL_ENA */
+#define WM8993_SPKOUTL_ENA_MASK 0x1000 /* SPKOUTL_ENA */
+#define WM8993_SPKOUTL_ENA_SHIFT 12 /* SPKOUTL_ENA */
+#define WM8993_SPKOUTL_ENA_WIDTH 1 /* SPKOUTL_ENA */
+#define WM8993_HPOUT2_ENA 0x0800 /* HPOUT2_ENA */
+#define WM8993_HPOUT2_ENA_MASK 0x0800 /* HPOUT2_ENA */
+#define WM8993_HPOUT2_ENA_SHIFT 11 /* HPOUT2_ENA */
+#define WM8993_HPOUT2_ENA_WIDTH 1 /* HPOUT2_ENA */
+#define WM8993_HPOUT1L_ENA 0x0200 /* HPOUT1L_ENA */
+#define WM8993_HPOUT1L_ENA_MASK 0x0200 /* HPOUT1L_ENA */
+#define WM8993_HPOUT1L_ENA_SHIFT 9 /* HPOUT1L_ENA */
+#define WM8993_HPOUT1L_ENA_WIDTH 1 /* HPOUT1L_ENA */
+#define WM8993_HPOUT1R_ENA 0x0100 /* HPOUT1R_ENA */
+#define WM8993_HPOUT1R_ENA_MASK 0x0100 /* HPOUT1R_ENA */
+#define WM8993_HPOUT1R_ENA_SHIFT 8 /* HPOUT1R_ENA */
+#define WM8993_HPOUT1R_ENA_WIDTH 1 /* HPOUT1R_ENA */
+#define WM8993_MICB2_ENA 0x0020 /* MICB2_ENA */
+#define WM8993_MICB2_ENA_MASK 0x0020 /* MICB2_ENA */
+#define WM8993_MICB2_ENA_SHIFT 5 /* MICB2_ENA */
+#define WM8993_MICB2_ENA_WIDTH 1 /* MICB2_ENA */
+#define WM8993_MICB1_ENA 0x0010 /* MICB1_ENA */
+#define WM8993_MICB1_ENA_MASK 0x0010 /* MICB1_ENA */
+#define WM8993_MICB1_ENA_SHIFT 4 /* MICB1_ENA */
+#define WM8993_MICB1_ENA_WIDTH 1 /* MICB1_ENA */
+#define WM8993_VMID_SEL_MASK 0x0006 /* VMID_SEL - [2:1] */
+#define WM8993_VMID_SEL_SHIFT 1 /* VMID_SEL - [2:1] */
+#define WM8993_VMID_SEL_WIDTH 2 /* VMID_SEL - [2:1] */
+#define WM8993_BIAS_ENA 0x0001 /* BIAS_ENA */
+#define WM8993_BIAS_ENA_MASK 0x0001 /* BIAS_ENA */
+#define WM8993_BIAS_ENA_SHIFT 0 /* BIAS_ENA */
+#define WM8993_BIAS_ENA_WIDTH 1 /* BIAS_ENA */
+
+/*
+ * R2 (0x02) - Power Management (2)
+ */
+#define WM8993_TSHUT_ENA 0x4000 /* TSHUT_ENA */
+#define WM8993_TSHUT_ENA_MASK 0x4000 /* TSHUT_ENA */
+#define WM8993_TSHUT_ENA_SHIFT 14 /* TSHUT_ENA */
+#define WM8993_TSHUT_ENA_WIDTH 1 /* TSHUT_ENA */
+#define WM8993_TSHUT_OPDIS 0x2000 /* TSHUT_OPDIS */
+#define WM8993_TSHUT_OPDIS_MASK 0x2000 /* TSHUT_OPDIS */
+#define WM8993_TSHUT_OPDIS_SHIFT 13 /* TSHUT_OPDIS */
+#define WM8993_TSHUT_OPDIS_WIDTH 1 /* TSHUT_OPDIS */
+#define WM8993_OPCLK_ENA 0x0800 /* OPCLK_ENA */
+#define WM8993_OPCLK_ENA_MASK 0x0800 /* OPCLK_ENA */
+#define WM8993_OPCLK_ENA_SHIFT 11 /* OPCLK_ENA */
+#define WM8993_OPCLK_ENA_WIDTH 1 /* OPCLK_ENA */
+#define WM8993_MIXINL_ENA 0x0200 /* MIXINL_ENA */
+#define WM8993_MIXINL_ENA_MASK 0x0200 /* MIXINL_ENA */
+#define WM8993_MIXINL_ENA_SHIFT 9 /* MIXINL_ENA */
+#define WM8993_MIXINL_ENA_WIDTH 1 /* MIXINL_ENA */
+#define WM8993_MIXINR_ENA 0x0100 /* MIXINR_ENA */
+#define WM8993_MIXINR_ENA_MASK 0x0100 /* MIXINR_ENA */
+#define WM8993_MIXINR_ENA_SHIFT 8 /* MIXINR_ENA */
+#define WM8993_MIXINR_ENA_WIDTH 1 /* MIXINR_ENA */
+#define WM8993_IN2L_ENA 0x0080 /* IN2L_ENA */
+#define WM8993_IN2L_ENA_MASK 0x0080 /* IN2L_ENA */
+#define WM8993_IN2L_ENA_SHIFT 7 /* IN2L_ENA */
+#define WM8993_IN2L_ENA_WIDTH 1 /* IN2L_ENA */
+#define WM8993_IN1L_ENA 0x0040 /* IN1L_ENA */
+#define WM8993_IN1L_ENA_MASK 0x0040 /* IN1L_ENA */
+#define WM8993_IN1L_ENA_SHIFT 6 /* IN1L_ENA */
+#define WM8993_IN1L_ENA_WIDTH 1 /* IN1L_ENA */
+#define WM8993_IN2R_ENA 0x0020 /* IN2R_ENA */
+#define WM8993_IN2R_ENA_MASK 0x0020 /* IN2R_ENA */
+#define WM8993_IN2R_ENA_SHIFT 5 /* IN2R_ENA */
+#define WM8993_IN2R_ENA_WIDTH 1 /* IN2R_ENA */
+#define WM8993_IN1R_ENA 0x0010 /* IN1R_ENA */
+#define WM8993_IN1R_ENA_MASK 0x0010 /* IN1R_ENA */
+#define WM8993_IN1R_ENA_SHIFT 4 /* IN1R_ENA */
+#define WM8993_IN1R_ENA_WIDTH 1 /* IN1R_ENA */
+#define WM8993_ADCL_ENA 0x0002 /* ADCL_ENA */
+#define WM8993_ADCL_ENA_MASK 0x0002 /* ADCL_ENA */
+#define WM8993_ADCL_ENA_SHIFT 1 /* ADCL_ENA */
+#define WM8993_ADCL_ENA_WIDTH 1 /* ADCL_ENA */
+#define WM8993_ADCR_ENA 0x0001 /* ADCR_ENA */
+#define WM8993_ADCR_ENA_MASK 0x0001 /* ADCR_ENA */
+#define WM8993_ADCR_ENA_SHIFT 0 /* ADCR_ENA */
+#define WM8993_ADCR_ENA_WIDTH 1 /* ADCR_ENA */
+
+/*
+ * R3 (0x03) - Power Management (3)
+ */
+#define WM8993_LINEOUT1N_ENA 0x2000 /* LINEOUT1N_ENA */
+#define WM8993_LINEOUT1N_ENA_MASK 0x2000 /* LINEOUT1N_ENA */
+#define WM8993_LINEOUT1N_ENA_SHIFT 13 /* LINEOUT1N_ENA */
+#define WM8993_LINEOUT1N_ENA_WIDTH 1 /* LINEOUT1N_ENA */
+#define WM8993_LINEOUT1P_ENA 0x1000 /* LINEOUT1P_ENA */
+#define WM8993_LINEOUT1P_ENA_MASK 0x1000 /* LINEOUT1P_ENA */
+#define WM8993_LINEOUT1P_ENA_SHIFT 12 /* LINEOUT1P_ENA */
+#define WM8993_LINEOUT1P_ENA_WIDTH 1 /* LINEOUT1P_ENA */
+#define WM8993_LINEOUT2N_ENA 0x0800 /* LINEOUT2N_ENA */
+#define WM8993_LINEOUT2N_ENA_MASK 0x0800 /* LINEOUT2N_ENA */
+#define WM8993_LINEOUT2N_ENA_SHIFT 11 /* LINEOUT2N_ENA */
+#define WM8993_LINEOUT2N_ENA_WIDTH 1 /* LINEOUT2N_ENA */
+#define WM8993_LINEOUT2P_ENA 0x0400 /* LINEOUT2P_ENA */
+#define WM8993_LINEOUT2P_ENA_MASK 0x0400 /* LINEOUT2P_ENA */
+#define WM8993_LINEOUT2P_ENA_SHIFT 10 /* LINEOUT2P_ENA */
+#define WM8993_LINEOUT2P_ENA_WIDTH 1 /* LINEOUT2P_ENA */
+#define WM8993_SPKRVOL_ENA 0x0200 /* SPKRVOL_ENA */
+#define WM8993_SPKRVOL_ENA_MASK 0x0200 /* SPKRVOL_ENA */
+#define WM8993_SPKRVOL_ENA_SHIFT 9 /* SPKRVOL_ENA */
+#define WM8993_SPKRVOL_ENA_WIDTH 1 /* SPKRVOL_ENA */
+#define WM8993_SPKLVOL_ENA 0x0100 /* SPKLVOL_ENA */
+#define WM8993_SPKLVOL_ENA_MASK 0x0100 /* SPKLVOL_ENA */
+#define WM8993_SPKLVOL_ENA_SHIFT 8 /* SPKLVOL_ENA */
+#define WM8993_SPKLVOL_ENA_WIDTH 1 /* SPKLVOL_ENA */
+#define WM8993_MIXOUTLVOL_ENA 0x0080 /* MIXOUTLVOL_ENA */
+#define WM8993_MIXOUTLVOL_ENA_MASK 0x0080 /* MIXOUTLVOL_ENA */
+#define WM8993_MIXOUTLVOL_ENA_SHIFT 7 /* MIXOUTLVOL_ENA */
+#define WM8993_MIXOUTLVOL_ENA_WIDTH 1 /* MIXOUTLVOL_ENA */
+#define WM8993_MIXOUTRVOL_ENA 0x0040 /* MIXOUTRVOL_ENA */
+#define WM8993_MIXOUTRVOL_ENA_MASK 0x0040 /* MIXOUTRVOL_ENA */
+#define WM8993_MIXOUTRVOL_ENA_SHIFT 6 /* MIXOUTRVOL_ENA */
+#define WM8993_MIXOUTRVOL_ENA_WIDTH 1 /* MIXOUTRVOL_ENA */
+#define WM8993_MIXOUTL_ENA 0x0020 /* MIXOUTL_ENA */
+#define WM8993_MIXOUTL_ENA_MASK 0x0020 /* MIXOUTL_ENA */
+#define WM8993_MIXOUTL_ENA_SHIFT 5 /* MIXOUTL_ENA */
+#define WM8993_MIXOUTL_ENA_WIDTH 1 /* MIXOUTL_ENA */
+#define WM8993_MIXOUTR_ENA 0x0010 /* MIXOUTR_ENA */
+#define WM8993_MIXOUTR_ENA_MASK 0x0010 /* MIXOUTR_ENA */
+#define WM8993_MIXOUTR_ENA_SHIFT 4 /* MIXOUTR_ENA */
+#define WM8993_MIXOUTR_ENA_WIDTH 1 /* MIXOUTR_ENA */
+#define WM8993_DACL_ENA 0x0002 /* DACL_ENA */
+#define WM8993_DACL_ENA_MASK 0x0002 /* DACL_ENA */
+#define WM8993_DACL_ENA_SHIFT 1 /* DACL_ENA */
+#define WM8993_DACL_ENA_WIDTH 1 /* DACL_ENA */
+#define WM8993_DACR_ENA 0x0001 /* DACR_ENA */
+#define WM8993_DACR_ENA_MASK 0x0001 /* DACR_ENA */
+#define WM8993_DACR_ENA_SHIFT 0 /* DACR_ENA */
+#define WM8993_DACR_ENA_WIDTH 1 /* DACR_ENA */
+
+/*
+ * R4 (0x04) - Audio Interface (1)
+ */
+#define WM8993_AIFADCL_SRC 0x8000 /* AIFADCL_SRC */
+#define WM8993_AIFADCL_SRC_MASK 0x8000 /* AIFADCL_SRC */
+#define WM8993_AIFADCL_SRC_SHIFT 15 /* AIFADCL_SRC */
+#define WM8993_AIFADCL_SRC_WIDTH 1 /* AIFADCL_SRC */
+#define WM8993_AIFADCR_SRC 0x4000 /* AIFADCR_SRC */
+#define WM8993_AIFADCR_SRC_MASK 0x4000 /* AIFADCR_SRC */
+#define WM8993_AIFADCR_SRC_SHIFT 14 /* AIFADCR_SRC */
+#define WM8993_AIFADCR_SRC_WIDTH 1 /* AIFADCR_SRC */
+#define WM8993_AIFADC_TDM 0x2000 /* AIFADC_TDM */
+#define WM8993_AIFADC_TDM_MASK 0x2000 /* AIFADC_TDM */
+#define WM8993_AIFADC_TDM_SHIFT 13 /* AIFADC_TDM */
+#define WM8993_AIFADC_TDM_WIDTH 1 /* AIFADC_TDM */
+#define WM8993_AIFADC_TDM_CHAN 0x1000 /* AIFADC_TDM_CHAN */
+#define WM8993_AIFADC_TDM_CHAN_MASK 0x1000 /* AIFADC_TDM_CHAN */
+#define WM8993_AIFADC_TDM_CHAN_SHIFT 12 /* AIFADC_TDM_CHAN */
+#define WM8993_AIFADC_TDM_CHAN_WIDTH 1 /* AIFADC_TDM_CHAN */
+#define WM8993_BCLK_DIR 0x0200 /* BCLK_DIR */
+#define WM8993_BCLK_DIR_MASK 0x0200 /* BCLK_DIR */
+#define WM8993_BCLK_DIR_SHIFT 9 /* BCLK_DIR */
+#define WM8993_BCLK_DIR_WIDTH 1 /* BCLK_DIR */
+#define WM8993_AIF_BCLK_INV 0x0100 /* AIF_BCLK_INV */
+#define WM8993_AIF_BCLK_INV_MASK 0x0100 /* AIF_BCLK_INV */
+#define WM8993_AIF_BCLK_INV_SHIFT 8 /* AIF_BCLK_INV */
+#define WM8993_AIF_BCLK_INV_WIDTH 1 /* AIF_BCLK_INV */
+#define WM8993_AIF_LRCLK_INV 0x0080 /* AIF_LRCLK_INV */
+#define WM8993_AIF_LRCLK_INV_MASK 0x0080 /* AIF_LRCLK_INV */
+#define WM8993_AIF_LRCLK_INV_SHIFT 7 /* AIF_LRCLK_INV */
+#define WM8993_AIF_LRCLK_INV_WIDTH 1 /* AIF_LRCLK_INV */
+#define WM8993_AIF_WL_MASK 0x0060 /* AIF_WL - [6:5] */
+#define WM8993_AIF_WL_SHIFT 5 /* AIF_WL - [6:5] */
+#define WM8993_AIF_WL_WIDTH 2 /* AIF_WL - [6:5] */
+#define WM8993_AIF_FMT_MASK 0x0018 /* AIF_FMT - [4:3] */
+#define WM8993_AIF_FMT_SHIFT 3 /* AIF_FMT - [4:3] */
+#define WM8993_AIF_FMT_WIDTH 2 /* AIF_FMT - [4:3] */
+
+/*
+ * R5 (0x05) - Audio Interface (2)
+ */
+#define WM8993_AIFDACL_SRC 0x8000 /* AIFDACL_SRC */
+#define WM8993_AIFDACL_SRC_MASK 0x8000 /* AIFDACL_SRC */
+#define WM8993_AIFDACL_SRC_SHIFT 15 /* AIFDACL_SRC */
+#define WM8993_AIFDACL_SRC_WIDTH 1 /* AIFDACL_SRC */
+#define WM8993_AIFDACR_SRC 0x4000 /* AIFDACR_SRC */
+#define WM8993_AIFDACR_SRC_MASK 0x4000 /* AIFDACR_SRC */
+#define WM8993_AIFDACR_SRC_SHIFT 14 /* AIFDACR_SRC */
+#define WM8993_AIFDACR_SRC_WIDTH 1 /* AIFDACR_SRC */
+#define WM8993_AIFDAC_TDM 0x2000 /* AIFDAC_TDM */
+#define WM8993_AIFDAC_TDM_MASK 0x2000 /* AIFDAC_TDM */
+#define WM8993_AIFDAC_TDM_SHIFT 13 /* AIFDAC_TDM */
+#define WM8993_AIFDAC_TDM_WIDTH 1 /* AIFDAC_TDM */
+#define WM8993_AIFDAC_TDM_CHAN 0x1000 /* AIFDAC_TDM_CHAN */
+#define WM8993_AIFDAC_TDM_CHAN_MASK 0x1000 /* AIFDAC_TDM_CHAN */
+#define WM8993_AIFDAC_TDM_CHAN_SHIFT 12 /* AIFDAC_TDM_CHAN */
+#define WM8993_AIFDAC_TDM_CHAN_WIDTH 1 /* AIFDAC_TDM_CHAN */
+#define WM8993_DAC_BOOST_MASK 0x0C00 /* DAC_BOOST - [11:10] */
+#define WM8993_DAC_BOOST_SHIFT 10 /* DAC_BOOST - [11:10] */
+#define WM8993_DAC_BOOST_WIDTH 2 /* DAC_BOOST - [11:10] */
+#define WM8993_DAC_COMP 0x0010 /* DAC_COMP */
+#define WM8993_DAC_COMP_MASK 0x0010 /* DAC_COMP */
+#define WM8993_DAC_COMP_SHIFT 4 /* DAC_COMP */
+#define WM8993_DAC_COMP_WIDTH 1 /* DAC_COMP */
+#define WM8993_DAC_COMPMODE 0x0008 /* DAC_COMPMODE */
+#define WM8993_DAC_COMPMODE_MASK 0x0008 /* DAC_COMPMODE */
+#define WM8993_DAC_COMPMODE_SHIFT 3 /* DAC_COMPMODE */
+#define WM8993_DAC_COMPMODE_WIDTH 1 /* DAC_COMPMODE */
+#define WM8993_ADC_COMP 0x0004 /* ADC_COMP */
+#define WM8993_ADC_COMP_MASK 0x0004 /* ADC_COMP */
+#define WM8993_ADC_COMP_SHIFT 2 /* ADC_COMP */
+#define WM8993_ADC_COMP_WIDTH 1 /* ADC_COMP */
+#define WM8993_ADC_COMPMODE 0x0002 /* ADC_COMPMODE */
+#define WM8993_ADC_COMPMODE_MASK 0x0002 /* ADC_COMPMODE */
+#define WM8993_ADC_COMPMODE_SHIFT 1 /* ADC_COMPMODE */
+#define WM8993_ADC_COMPMODE_WIDTH 1 /* ADC_COMPMODE */
+#define WM8993_LOOPBACK 0x0001 /* LOOPBACK */
+#define WM8993_LOOPBACK_MASK 0x0001 /* LOOPBACK */
+#define WM8993_LOOPBACK_SHIFT 0 /* LOOPBACK */
+#define WM8993_LOOPBACK_WIDTH 1 /* LOOPBACK */
+
+/*
+ * R6 (0x06) - Clocking 1
+ */
+#define WM8993_TOCLK_RATE 0x8000 /* TOCLK_RATE */
+#define WM8993_TOCLK_RATE_MASK 0x8000 /* TOCLK_RATE */
+#define WM8993_TOCLK_RATE_SHIFT 15 /* TOCLK_RATE */
+#define WM8993_TOCLK_RATE_WIDTH 1 /* TOCLK_RATE */
+#define WM8993_TOCLK_ENA 0x4000 /* TOCLK_ENA */
+#define WM8993_TOCLK_ENA_MASK 0x4000 /* TOCLK_ENA */
+#define WM8993_TOCLK_ENA_SHIFT 14 /* TOCLK_ENA */
+#define WM8993_TOCLK_ENA_WIDTH 1 /* TOCLK_ENA */
+#define WM8993_OPCLK_DIV_MASK 0x1E00 /* OPCLK_DIV - [12:9] */
+#define WM8993_OPCLK_DIV_SHIFT 9 /* OPCLK_DIV - [12:9] */
+#define WM8993_OPCLK_DIV_WIDTH 4 /* OPCLK_DIV - [12:9] */
+#define WM8993_DCLK_DIV_MASK 0x01C0 /* DCLK_DIV - [8:6] */
+#define WM8993_DCLK_DIV_SHIFT 6 /* DCLK_DIV - [8:6] */
+#define WM8993_DCLK_DIV_WIDTH 3 /* DCLK_DIV - [8:6] */
+#define WM8993_BCLK_DIV_MASK 0x001E /* BCLK_DIV - [4:1] */
+#define WM8993_BCLK_DIV_SHIFT 1 /* BCLK_DIV - [4:1] */
+#define WM8993_BCLK_DIV_WIDTH 4 /* BCLK_DIV - [4:1] */
+
+/*
+ * R7 (0x07) - Clocking 2
+ */
+#define WM8993_MCLK_SRC 0x8000 /* MCLK_SRC */
+#define WM8993_MCLK_SRC_MASK 0x8000 /* MCLK_SRC */
+#define WM8993_MCLK_SRC_SHIFT 15 /* MCLK_SRC */
+#define WM8993_MCLK_SRC_WIDTH 1 /* MCLK_SRC */
+#define WM8993_SYSCLK_SRC 0x4000 /* SYSCLK_SRC */
+#define WM8993_SYSCLK_SRC_MASK 0x4000 /* SYSCLK_SRC */
+#define WM8993_SYSCLK_SRC_SHIFT 14 /* SYSCLK_SRC */
+#define WM8993_SYSCLK_SRC_WIDTH 1 /* SYSCLK_SRC */
+#define WM8993_MCLK_DIV 0x1000 /* MCLK_DIV */
+#define WM8993_MCLK_DIV_MASK 0x1000 /* MCLK_DIV */
+#define WM8993_MCLK_DIV_SHIFT 12 /* MCLK_DIV */
+#define WM8993_MCLK_DIV_WIDTH 1 /* MCLK_DIV */
+#define WM8993_MCLK_INV 0x0400 /* MCLK_INV */
+#define WM8993_MCLK_INV_MASK 0x0400 /* MCLK_INV */
+#define WM8993_MCLK_INV_SHIFT 10 /* MCLK_INV */
+#define WM8993_MCLK_INV_WIDTH 1 /* MCLK_INV */
+#define WM8993_ADC_DIV_MASK 0x00E0 /* ADC_DIV - [7:5] */
+#define WM8993_ADC_DIV_SHIFT 5 /* ADC_DIV - [7:5] */
+#define WM8993_ADC_DIV_WIDTH 3 /* ADC_DIV - [7:5] */
+#define WM8993_DAC_DIV_MASK 0x001C /* DAC_DIV - [4:2] */
+#define WM8993_DAC_DIV_SHIFT 2 /* DAC_DIV - [4:2] */
+#define WM8993_DAC_DIV_WIDTH 3 /* DAC_DIV - [4:2] */
+
+/*
+ * R8 (0x08) - Audio Interface (3)
+ */
+#define WM8993_AIF_MSTR1 0x8000 /* AIF_MSTR1 */
+#define WM8993_AIF_MSTR1_MASK 0x8000 /* AIF_MSTR1 */
+#define WM8993_AIF_MSTR1_SHIFT 15 /* AIF_MSTR1 */
+#define WM8993_AIF_MSTR1_WIDTH 1 /* AIF_MSTR1 */
+
+/*
+ * R9 (0x09) - Audio Interface (4)
+ */
+#define WM8993_AIF_TRIS 0x2000 /* AIF_TRIS */
+#define WM8993_AIF_TRIS_MASK 0x2000 /* AIF_TRIS */
+#define WM8993_AIF_TRIS_SHIFT 13 /* AIF_TRIS */
+#define WM8993_AIF_TRIS_WIDTH 1 /* AIF_TRIS */
+#define WM8993_LRCLK_DIR 0x0800 /* LRCLK_DIR */
+#define WM8993_LRCLK_DIR_MASK 0x0800 /* LRCLK_DIR */
+#define WM8993_LRCLK_DIR_SHIFT 11 /* LRCLK_DIR */
+#define WM8993_LRCLK_DIR_WIDTH 1 /* LRCLK_DIR */
+#define WM8993_LRCLK_RATE_MASK 0x07FF /* LRCLK_RATE - [10:0] */
+#define WM8993_LRCLK_RATE_SHIFT 0 /* LRCLK_RATE - [10:0] */
+#define WM8993_LRCLK_RATE_WIDTH 11 /* LRCLK_RATE - [10:0] */
+
+/*
+ * R10 (0x0A) - DAC CTRL
+ */
+#define WM8993_DAC_OSR128 0x2000 /* DAC_OSR128 */
+#define WM8993_DAC_OSR128_MASK 0x2000 /* DAC_OSR128 */
+#define WM8993_DAC_OSR128_SHIFT 13 /* DAC_OSR128 */
+#define WM8993_DAC_OSR128_WIDTH 1 /* DAC_OSR128 */
+#define WM8993_DAC_MONO 0x0200 /* DAC_MONO */
+#define WM8993_DAC_MONO_MASK 0x0200 /* DAC_MONO */
+#define WM8993_DAC_MONO_SHIFT 9 /* DAC_MONO */
+#define WM8993_DAC_MONO_WIDTH 1 /* DAC_MONO */
+#define WM8993_DAC_SB_FILT 0x0100 /* DAC_SB_FILT */
+#define WM8993_DAC_SB_FILT_MASK 0x0100 /* DAC_SB_FILT */
+#define WM8993_DAC_SB_FILT_SHIFT 8 /* DAC_SB_FILT */
+#define WM8993_DAC_SB_FILT_WIDTH 1 /* DAC_SB_FILT */
+#define WM8993_DAC_MUTERATE 0x0080 /* DAC_MUTERATE */
+#define WM8993_DAC_MUTERATE_MASK 0x0080 /* DAC_MUTERATE */
+#define WM8993_DAC_MUTERATE_SHIFT 7 /* DAC_MUTERATE */
+#define WM8993_DAC_MUTERATE_WIDTH 1 /* DAC_MUTERATE */
+#define WM8993_DAC_UNMUTE_RAMP 0x0040 /* DAC_UNMUTE_RAMP */
+#define WM8993_DAC_UNMUTE_RAMP_MASK 0x0040 /* DAC_UNMUTE_RAMP */
+#define WM8993_DAC_UNMUTE_RAMP_SHIFT 6 /* DAC_UNMUTE_RAMP */
+#define WM8993_DAC_UNMUTE_RAMP_WIDTH 1 /* DAC_UNMUTE_RAMP */
+#define WM8993_DEEMPH_MASK 0x0030 /* DEEMPH - [5:4] */
+#define WM8993_DEEMPH_SHIFT 4 /* DEEMPH - [5:4] */
+#define WM8993_DEEMPH_WIDTH 2 /* DEEMPH - [5:4] */
+#define WM8993_DAC_MUTE 0x0004 /* DAC_MUTE */
+#define WM8993_DAC_MUTE_MASK 0x0004 /* DAC_MUTE */
+#define WM8993_DAC_MUTE_SHIFT 2 /* DAC_MUTE */
+#define WM8993_DAC_MUTE_WIDTH 1 /* DAC_MUTE */
+#define WM8993_DACL_DATINV 0x0002 /* DACL_DATINV */
+#define WM8993_DACL_DATINV_MASK 0x0002 /* DACL_DATINV */
+#define WM8993_DACL_DATINV_SHIFT 1 /* DACL_DATINV */
+#define WM8993_DACL_DATINV_WIDTH 1 /* DACL_DATINV */
+#define WM8993_DACR_DATINV 0x0001 /* DACR_DATINV */
+#define WM8993_DACR_DATINV_MASK 0x0001 /* DACR_DATINV */
+#define WM8993_DACR_DATINV_SHIFT 0 /* DACR_DATINV */
+#define WM8993_DACR_DATINV_WIDTH 1 /* DACR_DATINV */
+
+/*
+ * R11 (0x0B) - Left DAC Digital Volume
+ */
+#define WM8993_DAC_VU 0x0100 /* DAC_VU */
+#define WM8993_DAC_VU_MASK 0x0100 /* DAC_VU */
+#define WM8993_DAC_VU_SHIFT 8 /* DAC_VU */
+#define WM8993_DAC_VU_WIDTH 1 /* DAC_VU */
+#define WM8993_DACL_VOL_MASK 0x00FF /* DACL_VOL - [7:0] */
+#define WM8993_DACL_VOL_SHIFT 0 /* DACL_VOL - [7:0] */
+#define WM8993_DACL_VOL_WIDTH 8 /* DACL_VOL - [7:0] */
+
+/*
+ * R12 (0x0C) - Right DAC Digital Volume
+ */
+#define WM8993_DAC_VU 0x0100 /* DAC_VU */
+#define WM8993_DAC_VU_MASK 0x0100 /* DAC_VU */
+#define WM8993_DAC_VU_SHIFT 8 /* DAC_VU */
+#define WM8993_DAC_VU_WIDTH 1 /* DAC_VU */
+#define WM8993_DACR_VOL_MASK 0x00FF /* DACR_VOL - [7:0] */
+#define WM8993_DACR_VOL_SHIFT 0 /* DACR_VOL - [7:0] */
+#define WM8993_DACR_VOL_WIDTH 8 /* DACR_VOL - [7:0] */
+
+/*
+ * R13 (0x0D) - Digital Side Tone
+ */
+#define WM8993_ADCL_DAC_SVOL_MASK 0x1E00 /* ADCL_DAC_SVOL - [12:9] */
+#define WM8993_ADCL_DAC_SVOL_SHIFT 9 /* ADCL_DAC_SVOL - [12:9] */
+#define WM8993_ADCL_DAC_SVOL_WIDTH 4 /* ADCL_DAC_SVOL - [12:9] */
+#define WM8993_ADCR_DAC_SVOL_MASK 0x01E0 /* ADCR_DAC_SVOL - [8:5] */
+#define WM8993_ADCR_DAC_SVOL_SHIFT 5 /* ADCR_DAC_SVOL - [8:5] */
+#define WM8993_ADCR_DAC_SVOL_WIDTH 4 /* ADCR_DAC_SVOL - [8:5] */
+#define WM8993_ADC_TO_DACL_MASK 0x000C /* ADC_TO_DACL - [3:2] */
+#define WM8993_ADC_TO_DACL_SHIFT 2 /* ADC_TO_DACL - [3:2] */
+#define WM8993_ADC_TO_DACL_WIDTH 2 /* ADC_TO_DACL - [3:2] */
+#define WM8993_ADC_TO_DACR_MASK 0x0003 /* ADC_TO_DACR - [1:0] */
+#define WM8993_ADC_TO_DACR_SHIFT 0 /* ADC_TO_DACR - [1:0] */
+#define WM8993_ADC_TO_DACR_WIDTH 2 /* ADC_TO_DACR - [1:0] */
+
+/*
+ * R14 (0x0E) - ADC CTRL
+ */
+#define WM8993_ADC_OSR128 0x0200 /* ADC_OSR128 */
+#define WM8993_ADC_OSR128_MASK 0x0200 /* ADC_OSR128 */
+#define WM8993_ADC_OSR128_SHIFT 9 /* ADC_OSR128 */
+#define WM8993_ADC_OSR128_WIDTH 1 /* ADC_OSR128 */
+#define WM8993_ADC_HPF 0x0100 /* ADC_HPF */
+#define WM8993_ADC_HPF_MASK 0x0100 /* ADC_HPF */
+#define WM8993_ADC_HPF_SHIFT 8 /* ADC_HPF */
+#define WM8993_ADC_HPF_WIDTH 1 /* ADC_HPF */
+#define WM8993_ADC_HPF_CUT_MASK 0x0060 /* ADC_HPF_CUT - [6:5] */
+#define WM8993_ADC_HPF_CUT_SHIFT 5 /* ADC_HPF_CUT - [6:5] */
+#define WM8993_ADC_HPF_CUT_WIDTH 2 /* ADC_HPF_CUT - [6:5] */
+#define WM8993_ADCL_DATINV 0x0002 /* ADCL_DATINV */
+#define WM8993_ADCL_DATINV_MASK 0x0002 /* ADCL_DATINV */
+#define WM8993_ADCL_DATINV_SHIFT 1 /* ADCL_DATINV */
+#define WM8993_ADCL_DATINV_WIDTH 1 /* ADCL_DATINV */
+#define WM8993_ADCR_DATINV 0x0001 /* ADCR_DATINV */
+#define WM8993_ADCR_DATINV_MASK 0x0001 /* ADCR_DATINV */
+#define WM8993_ADCR_DATINV_SHIFT 0 /* ADCR_DATINV */
+#define WM8993_ADCR_DATINV_WIDTH 1 /* ADCR_DATINV */
+
+/*
+ * R15 (0x0F) - Left ADC Digital Volume
+ */
+#define WM8993_ADC_VU 0x0100 /* ADC_VU */
+#define WM8993_ADC_VU_MASK 0x0100 /* ADC_VU */
+#define WM8993_ADC_VU_SHIFT 8 /* ADC_VU */
+#define WM8993_ADC_VU_WIDTH 1 /* ADC_VU */
+#define WM8993_ADCL_VOL_MASK 0x00FF /* ADCL_VOL - [7:0] */
+#define WM8993_ADCL_VOL_SHIFT 0 /* ADCL_VOL - [7:0] */
+#define WM8993_ADCL_VOL_WIDTH 8 /* ADCL_VOL - [7:0] */
+
+/*
+ * R16 (0x10) - Right ADC Digital Volume
+ */
+#define WM8993_ADC_VU 0x0100 /* ADC_VU */
+#define WM8993_ADC_VU_MASK 0x0100 /* ADC_VU */
+#define WM8993_ADC_VU_SHIFT 8 /* ADC_VU */
+#define WM8993_ADC_VU_WIDTH 1 /* ADC_VU */
+#define WM8993_ADCR_VOL_MASK 0x00FF /* ADCR_VOL - [7:0] */
+#define WM8993_ADCR_VOL_SHIFT 0 /* ADCR_VOL - [7:0] */
+#define WM8993_ADCR_VOL_WIDTH 8 /* ADCR_VOL - [7:0] */
+
+/*
+ * R18 (0x12) - GPIO CTRL 1
+ */
+#define WM8993_JD2_SC_EINT 0x8000 /* JD2_SC_EINT */
+#define WM8993_JD2_SC_EINT_MASK 0x8000 /* JD2_SC_EINT */
+#define WM8993_JD2_SC_EINT_SHIFT 15 /* JD2_SC_EINT */
+#define WM8993_JD2_SC_EINT_WIDTH 1 /* JD2_SC_EINT */
+#define WM8993_JD2_EINT 0x4000 /* JD2_EINT */
+#define WM8993_JD2_EINT_MASK 0x4000 /* JD2_EINT */
+#define WM8993_JD2_EINT_SHIFT 14 /* JD2_EINT */
+#define WM8993_JD2_EINT_WIDTH 1 /* JD2_EINT */
+#define WM8993_WSEQ_EINT 0x2000 /* WSEQ_EINT */
+#define WM8993_WSEQ_EINT_MASK 0x2000 /* WSEQ_EINT */
+#define WM8993_WSEQ_EINT_SHIFT 13 /* WSEQ_EINT */
+#define WM8993_WSEQ_EINT_WIDTH 1 /* WSEQ_EINT */
+#define WM8993_IRQ 0x1000 /* IRQ */
+#define WM8993_IRQ_MASK 0x1000 /* IRQ */
+#define WM8993_IRQ_SHIFT 12 /* IRQ */
+#define WM8993_IRQ_WIDTH 1 /* IRQ */
+#define WM8993_TEMPOK_EINT 0x0800 /* TEMPOK_EINT */
+#define WM8993_TEMPOK_EINT_MASK 0x0800 /* TEMPOK_EINT */
+#define WM8993_TEMPOK_EINT_SHIFT 11 /* TEMPOK_EINT */
+#define WM8993_TEMPOK_EINT_WIDTH 1 /* TEMPOK_EINT */
+#define WM8993_JD1_SC_EINT 0x0400 /* JD1_SC_EINT */
+#define WM8993_JD1_SC_EINT_MASK 0x0400 /* JD1_SC_EINT */
+#define WM8993_JD1_SC_EINT_SHIFT 10 /* JD1_SC_EINT */
+#define WM8993_JD1_SC_EINT_WIDTH 1 /* JD1_SC_EINT */
+#define WM8993_JD1_EINT 0x0200 /* JD1_EINT */
+#define WM8993_JD1_EINT_MASK 0x0200 /* JD1_EINT */
+#define WM8993_JD1_EINT_SHIFT 9 /* JD1_EINT */
+#define WM8993_JD1_EINT_WIDTH 1 /* JD1_EINT */
+#define WM8993_FLL_LOCK_EINT 0x0100 /* FLL_LOCK_EINT */
+#define WM8993_FLL_LOCK_EINT_MASK 0x0100 /* FLL_LOCK_EINT */
+#define WM8993_FLL_LOCK_EINT_SHIFT 8 /* FLL_LOCK_EINT */
+#define WM8993_FLL_LOCK_EINT_WIDTH 1 /* FLL_LOCK_EINT */
+#define WM8993_GPI8_EINT 0x0080 /* GPI8_EINT */
+#define WM8993_GPI8_EINT_MASK 0x0080 /* GPI8_EINT */
+#define WM8993_GPI8_EINT_SHIFT 7 /* GPI8_EINT */
+#define WM8993_GPI8_EINT_WIDTH 1 /* GPI8_EINT */
+#define WM8993_GPI7_EINT 0x0040 /* GPI7_EINT */
+#define WM8993_GPI7_EINT_MASK 0x0040 /* GPI7_EINT */
+#define WM8993_GPI7_EINT_SHIFT 6 /* GPI7_EINT */
+#define WM8993_GPI7_EINT_WIDTH 1 /* GPI7_EINT */
+#define WM8993_GPIO1_EINT 0x0001 /* GPIO1_EINT */
+#define WM8993_GPIO1_EINT_MASK 0x0001 /* GPIO1_EINT */
+#define WM8993_GPIO1_EINT_SHIFT 0 /* GPIO1_EINT */
+#define WM8993_GPIO1_EINT_WIDTH 1 /* GPIO1_EINT */
+
+/*
+ * R19 (0x13) - GPIO1
+ */
+#define WM8993_GPIO1_PU 0x0020 /* GPIO1_PU */
+#define WM8993_GPIO1_PU_MASK 0x0020 /* GPIO1_PU */
+#define WM8993_GPIO1_PU_SHIFT 5 /* GPIO1_PU */
+#define WM8993_GPIO1_PU_WIDTH 1 /* GPIO1_PU */
+#define WM8993_GPIO1_PD 0x0010 /* GPIO1_PD */
+#define WM8993_GPIO1_PD_MASK 0x0010 /* GPIO1_PD */
+#define WM8993_GPIO1_PD_SHIFT 4 /* GPIO1_PD */
+#define WM8993_GPIO1_PD_WIDTH 1 /* GPIO1_PD */
+#define WM8993_GPIO1_SEL_MASK 0x000F /* GPIO1_SEL - [3:0] */
+#define WM8993_GPIO1_SEL_SHIFT 0 /* GPIO1_SEL - [3:0] */
+#define WM8993_GPIO1_SEL_WIDTH 4 /* GPIO1_SEL - [3:0] */
+
+/*
+ * R20 (0x14) - IRQ_DEBOUNCE
+ */
+#define WM8993_JD2_SC_DB 0x8000 /* JD2_SC_DB */
+#define WM8993_JD2_SC_DB_MASK 0x8000 /* JD2_SC_DB */
+#define WM8993_JD2_SC_DB_SHIFT 15 /* JD2_SC_DB */
+#define WM8993_JD2_SC_DB_WIDTH 1 /* JD2_SC_DB */
+#define WM8993_JD2_DB 0x4000 /* JD2_DB */
+#define WM8993_JD2_DB_MASK 0x4000 /* JD2_DB */
+#define WM8993_JD2_DB_SHIFT 14 /* JD2_DB */
+#define WM8993_JD2_DB_WIDTH 1 /* JD2_DB */
+#define WM8993_WSEQ_DB 0x2000 /* WSEQ_DB */
+#define WM8993_WSEQ_DB_MASK 0x2000 /* WSEQ_DB */
+#define WM8993_WSEQ_DB_SHIFT 13 /* WSEQ_DB */
+#define WM8993_WSEQ_DB_WIDTH 1 /* WSEQ_DB */
+#define WM8993_TEMPOK_DB 0x0800 /* TEMPOK_DB */
+#define WM8993_TEMPOK_DB_MASK 0x0800 /* TEMPOK_DB */
+#define WM8993_TEMPOK_DB_SHIFT 11 /* TEMPOK_DB */
+#define WM8993_TEMPOK_DB_WIDTH 1 /* TEMPOK_DB */
+#define WM8993_JD1_SC_DB 0x0400 /* JD1_SC_DB */
+#define WM8993_JD1_SC_DB_MASK 0x0400 /* JD1_SC_DB */
+#define WM8993_JD1_SC_DB_SHIFT 10 /* JD1_SC_DB */
+#define WM8993_JD1_SC_DB_WIDTH 1 /* JD1_SC_DB */
+#define WM8993_JD1_DB 0x0200 /* JD1_DB */
+#define WM8993_JD1_DB_MASK 0x0200 /* JD1_DB */
+#define WM8993_JD1_DB_SHIFT 9 /* JD1_DB */
+#define WM8993_JD1_DB_WIDTH 1 /* JD1_DB */
+#define WM8993_FLL_LOCK_DB 0x0100 /* FLL_LOCK_DB */
+#define WM8993_FLL_LOCK_DB_MASK 0x0100 /* FLL_LOCK_DB */
+#define WM8993_FLL_LOCK_DB_SHIFT 8 /* FLL_LOCK_DB */
+#define WM8993_FLL_LOCK_DB_WIDTH 1 /* FLL_LOCK_DB */
+#define WM8993_GPI8_DB 0x0080 /* GPI8_DB */
+#define WM8993_GPI8_DB_MASK 0x0080 /* GPI8_DB */
+#define WM8993_GPI8_DB_SHIFT 7 /* GPI8_DB */
+#define WM8993_GPI8_DB_WIDTH 1 /* GPI8_DB */
+#define WM8993_GPI7_DB 0x0008 /* GPI7_DB */
+#define WM8993_GPI7_DB_MASK 0x0008 /* GPI7_DB */
+#define WM8993_GPI7_DB_SHIFT 3 /* GPI7_DB */
+#define WM8993_GPI7_DB_WIDTH 1 /* GPI7_DB */
+#define WM8993_GPIO1_DB 0x0001 /* GPIO1_DB */
+#define WM8993_GPIO1_DB_MASK 0x0001 /* GPIO1_DB */
+#define WM8993_GPIO1_DB_SHIFT 0 /* GPIO1_DB */
+#define WM8993_GPIO1_DB_WIDTH 1 /* GPIO1_DB */
+
+/*
+ * R22 (0x16) - GPIOCTRL 2
+ */
+#define WM8993_IM_JD2_EINT 0x2000 /* IM_JD2_EINT */
+#define WM8993_IM_JD2_EINT_MASK 0x2000 /* IM_JD2_EINT */
+#define WM8993_IM_JD2_EINT_SHIFT 13 /* IM_JD2_EINT */
+#define WM8993_IM_JD2_EINT_WIDTH 1 /* IM_JD2_EINT */
+#define WM8993_IM_JD2_SC_EINT 0x1000 /* IM_JD2_SC_EINT */
+#define WM8993_IM_JD2_SC_EINT_MASK 0x1000 /* IM_JD2_SC_EINT */
+#define WM8993_IM_JD2_SC_EINT_SHIFT 12 /* IM_JD2_SC_EINT */
+#define WM8993_IM_JD2_SC_EINT_WIDTH 1 /* IM_JD2_SC_EINT */
+#define WM8993_IM_TEMPOK_EINT 0x0800 /* IM_TEMPOK_EINT */
+#define WM8993_IM_TEMPOK_EINT_MASK 0x0800 /* IM_TEMPOK_EINT */
+#define WM8993_IM_TEMPOK_EINT_SHIFT 11 /* IM_TEMPOK_EINT */
+#define WM8993_IM_TEMPOK_EINT_WIDTH 1 /* IM_TEMPOK_EINT */
+#define WM8993_IM_JD1_SC_EINT 0x0400 /* IM_JD1_SC_EINT */
+#define WM8993_IM_JD1_SC_EINT_MASK 0x0400 /* IM_JD1_SC_EINT */
+#define WM8993_IM_JD1_SC_EINT_SHIFT 10 /* IM_JD1_SC_EINT */
+#define WM8993_IM_JD1_SC_EINT_WIDTH 1 /* IM_JD1_SC_EINT */
+#define WM8993_IM_JD1_EINT 0x0200 /* IM_JD1_EINT */
+#define WM8993_IM_JD1_EINT_MASK 0x0200 /* IM_JD1_EINT */
+#define WM8993_IM_JD1_EINT_SHIFT 9 /* IM_JD1_EINT */
+#define WM8993_IM_JD1_EINT_WIDTH 1 /* IM_JD1_EINT */
+#define WM8993_IM_FLL_LOCK_EINT 0x0100 /* IM_FLL_LOCK_EINT */
+#define WM8993_IM_FLL_LOCK_EINT_MASK 0x0100 /* IM_FLL_LOCK_EINT */
+#define WM8993_IM_FLL_LOCK_EINT_SHIFT 8 /* IM_FLL_LOCK_EINT */
+#define WM8993_IM_FLL_LOCK_EINT_WIDTH 1 /* IM_FLL_LOCK_EINT */
+#define WM8993_IM_GPI8_EINT 0x0040 /* IM_GPI8_EINT */
+#define WM8993_IM_GPI8_EINT_MASK 0x0040 /* IM_GPI8_EINT */
+#define WM8993_IM_GPI8_EINT_SHIFT 6 /* IM_GPI8_EINT */
+#define WM8993_IM_GPI8_EINT_WIDTH 1 /* IM_GPI8_EINT */
+#define WM8993_IM_GPIO1_EINT 0x0020 /* IM_GPIO1_EINT */
+#define WM8993_IM_GPIO1_EINT_MASK 0x0020 /* IM_GPIO1_EINT */
+#define WM8993_IM_GPIO1_EINT_SHIFT 5 /* IM_GPIO1_EINT */
+#define WM8993_IM_GPIO1_EINT_WIDTH 1 /* IM_GPIO1_EINT */
+#define WM8993_GPI8_ENA 0x0010 /* GPI8_ENA */
+#define WM8993_GPI8_ENA_MASK 0x0010 /* GPI8_ENA */
+#define WM8993_GPI8_ENA_SHIFT 4 /* GPI8_ENA */
+#define WM8993_GPI8_ENA_WIDTH 1 /* GPI8_ENA */
+#define WM8993_IM_GPI7_EINT 0x0004 /* IM_GPI7_EINT */
+#define WM8993_IM_GPI7_EINT_MASK 0x0004 /* IM_GPI7_EINT */
+#define WM8993_IM_GPI7_EINT_SHIFT 2 /* IM_GPI7_EINT */
+#define WM8993_IM_GPI7_EINT_WIDTH 1 /* IM_GPI7_EINT */
+#define WM8993_IM_WSEQ_EINT 0x0002 /* IM_WSEQ_EINT */
+#define WM8993_IM_WSEQ_EINT_MASK 0x0002 /* IM_WSEQ_EINT */
+#define WM8993_IM_WSEQ_EINT_SHIFT 1 /* IM_WSEQ_EINT */
+#define WM8993_IM_WSEQ_EINT_WIDTH 1 /* IM_WSEQ_EINT */
+#define WM8993_GPI7_ENA 0x0001 /* GPI7_ENA */
+#define WM8993_GPI7_ENA_MASK 0x0001 /* GPI7_ENA */
+#define WM8993_GPI7_ENA_SHIFT 0 /* GPI7_ENA */
+#define WM8993_GPI7_ENA_WIDTH 1 /* GPI7_ENA */
+
+/*
+ * R23 (0x17) - GPIO_POL
+ */
+#define WM8993_JD2_SC_POL 0x8000 /* JD2_SC_POL */
+#define WM8993_JD2_SC_POL_MASK 0x8000 /* JD2_SC_POL */
+#define WM8993_JD2_SC_POL_SHIFT 15 /* JD2_SC_POL */
+#define WM8993_JD2_SC_POL_WIDTH 1 /* JD2_SC_POL */
+#define WM8993_JD2_POL 0x4000 /* JD2_POL */
+#define WM8993_JD2_POL_MASK 0x4000 /* JD2_POL */
+#define WM8993_JD2_POL_SHIFT 14 /* JD2_POL */
+#define WM8993_JD2_POL_WIDTH 1 /* JD2_POL */
+#define WM8993_WSEQ_POL 0x2000 /* WSEQ_POL */
+#define WM8993_WSEQ_POL_MASK 0x2000 /* WSEQ_POL */
+#define WM8993_WSEQ_POL_SHIFT 13 /* WSEQ_POL */
+#define WM8993_WSEQ_POL_WIDTH 1 /* WSEQ_POL */
+#define WM8993_IRQ_POL 0x1000 /* IRQ_POL */
+#define WM8993_IRQ_POL_MASK 0x1000 /* IRQ_POL */
+#define WM8993_IRQ_POL_SHIFT 12 /* IRQ_POL */
+#define WM8993_IRQ_POL_WIDTH 1 /* IRQ_POL */
+#define WM8993_TEMPOK_POL 0x0800 /* TEMPOK_POL */
+#define WM8993_TEMPOK_POL_MASK 0x0800 /* TEMPOK_POL */
+#define WM8993_TEMPOK_POL_SHIFT 11 /* TEMPOK_POL */
+#define WM8993_TEMPOK_POL_WIDTH 1 /* TEMPOK_POL */
+#define WM8993_JD1_SC_POL 0x0400 /* JD1_SC_POL */
+#define WM8993_JD1_SC_POL_MASK 0x0400 /* JD1_SC_POL */
+#define WM8993_JD1_SC_POL_SHIFT 10 /* JD1_SC_POL */
+#define WM8993_JD1_SC_POL_WIDTH 1 /* JD1_SC_POL */
+#define WM8993_JD1_POL 0x0200 /* JD1_POL */
+#define WM8993_JD1_POL_MASK 0x0200 /* JD1_POL */
+#define WM8993_JD1_POL_SHIFT 9 /* JD1_POL */
+#define WM8993_JD1_POL_WIDTH 1 /* JD1_POL */
+#define WM8993_FLL_LOCK_POL 0x0100 /* FLL_LOCK_POL */
+#define WM8993_FLL_LOCK_POL_MASK 0x0100 /* FLL_LOCK_POL */
+#define WM8993_FLL_LOCK_POL_SHIFT 8 /* FLL_LOCK_POL */
+#define WM8993_FLL_LOCK_POL_WIDTH 1 /* FLL_LOCK_POL */
+#define WM8993_GPI8_POL 0x0080 /* GPI8_POL */
+#define WM8993_GPI8_POL_MASK 0x0080 /* GPI8_POL */
+#define WM8993_GPI8_POL_SHIFT 7 /* GPI8_POL */
+#define WM8993_GPI8_POL_WIDTH 1 /* GPI8_POL */
+#define WM8993_GPI7_POL 0x0040 /* GPI7_POL */
+#define WM8993_GPI7_POL_MASK 0x0040 /* GPI7_POL */
+#define WM8993_GPI7_POL_SHIFT 6 /* GPI7_POL */
+#define WM8993_GPI7_POL_WIDTH 1 /* GPI7_POL */
+#define WM8993_GPIO1_POL 0x0001 /* GPIO1_POL */
+#define WM8993_GPIO1_POL_MASK 0x0001 /* GPIO1_POL */
+#define WM8993_GPIO1_POL_SHIFT 0 /* GPIO1_POL */
+#define WM8993_GPIO1_POL_WIDTH 1 /* GPIO1_POL */
+
+/*
+ * R24 (0x18) - Left Line Input 1&2 Volume
+ */
+#define WM8993_IN1_VU 0x0100 /* IN1_VU */
+#define WM8993_IN1_VU_MASK 0x0100 /* IN1_VU */
+#define WM8993_IN1_VU_SHIFT 8 /* IN1_VU */
+#define WM8993_IN1_VU_WIDTH 1 /* IN1_VU */
+#define WM8993_IN1L_MUTE 0x0080 /* IN1L_MUTE */
+#define WM8993_IN1L_MUTE_MASK 0x0080 /* IN1L_MUTE */
+#define WM8993_IN1L_MUTE_SHIFT 7 /* IN1L_MUTE */
+#define WM8993_IN1L_MUTE_WIDTH 1 /* IN1L_MUTE */
+#define WM8993_IN1L_ZC 0x0040 /* IN1L_ZC */
+#define WM8993_IN1L_ZC_MASK 0x0040 /* IN1L_ZC */
+#define WM8993_IN1L_ZC_SHIFT 6 /* IN1L_ZC */
+#define WM8993_IN1L_ZC_WIDTH 1 /* IN1L_ZC */
+#define WM8993_IN1L_VOL_MASK 0x001F /* IN1L_VOL - [4:0] */
+#define WM8993_IN1L_VOL_SHIFT 0 /* IN1L_VOL - [4:0] */
+#define WM8993_IN1L_VOL_WIDTH 5 /* IN1L_VOL - [4:0] */
+
+/*
+ * R25 (0x19) - Left Line Input 3&4 Volume
+ */
+#define WM8993_IN2_VU 0x0100 /* IN2_VU */
+#define WM8993_IN2_VU_MASK 0x0100 /* IN2_VU */
+#define WM8993_IN2_VU_SHIFT 8 /* IN2_VU */
+#define WM8993_IN2_VU_WIDTH 1 /* IN2_VU */
+#define WM8993_IN2L_MUTE 0x0080 /* IN2L_MUTE */
+#define WM8993_IN2L_MUTE_MASK 0x0080 /* IN2L_MUTE */
+#define WM8993_IN2L_MUTE_SHIFT 7 /* IN2L_MUTE */
+#define WM8993_IN2L_MUTE_WIDTH 1 /* IN2L_MUTE */
+#define WM8993_IN2L_ZC 0x0040 /* IN2L_ZC */
+#define WM8993_IN2L_ZC_MASK 0x0040 /* IN2L_ZC */
+#define WM8993_IN2L_ZC_SHIFT 6 /* IN2L_ZC */
+#define WM8993_IN2L_ZC_WIDTH 1 /* IN2L_ZC */
+#define WM8993_IN2L_VOL_MASK 0x001F /* IN2L_VOL - [4:0] */
+#define WM8993_IN2L_VOL_SHIFT 0 /* IN2L_VOL - [4:0] */
+#define WM8993_IN2L_VOL_WIDTH 5 /* IN2L_VOL - [4:0] */
+
+/*
+ * R26 (0x1A) - Right Line Input 1&2 Volume
+ */
+#define WM8993_IN1_VU 0x0100 /* IN1_VU */
+#define WM8993_IN1_VU_MASK 0x0100 /* IN1_VU */
+#define WM8993_IN1_VU_SHIFT 8 /* IN1_VU */
+#define WM8993_IN1_VU_WIDTH 1 /* IN1_VU */
+#define WM8993_IN1R_MUTE 0x0080 /* IN1R_MUTE */
+#define WM8993_IN1R_MUTE_MASK 0x0080 /* IN1R_MUTE */
+#define WM8993_IN1R_MUTE_SHIFT 7 /* IN1R_MUTE */
+#define WM8993_IN1R_MUTE_WIDTH 1 /* IN1R_MUTE */
+#define WM8993_IN1R_ZC 0x0040 /* IN1R_ZC */
+#define WM8993_IN1R_ZC_MASK 0x0040 /* IN1R_ZC */
+#define WM8993_IN1R_ZC_SHIFT 6 /* IN1R_ZC */
+#define WM8993_IN1R_ZC_WIDTH 1 /* IN1R_ZC */
+#define WM8993_IN1R_VOL_MASK 0x001F /* IN1R_VOL - [4:0] */
+#define WM8993_IN1R_VOL_SHIFT 0 /* IN1R_VOL - [4:0] */
+#define WM8993_IN1R_VOL_WIDTH 5 /* IN1R_VOL - [4:0] */
+
+/*
+ * R27 (0x1B) - Right Line Input 3&4 Volume
+ */
+#define WM8993_IN2_VU 0x0100 /* IN2_VU */
+#define WM8993_IN2_VU_MASK 0x0100 /* IN2_VU */
+#define WM8993_IN2_VU_SHIFT 8 /* IN2_VU */
+#define WM8993_IN2_VU_WIDTH 1 /* IN2_VU */
+#define WM8993_IN2R_MUTE 0x0080 /* IN2R_MUTE */
+#define WM8993_IN2R_MUTE_MASK 0x0080 /* IN2R_MUTE */
+#define WM8993_IN2R_MUTE_SHIFT 7 /* IN2R_MUTE */
+#define WM8993_IN2R_MUTE_WIDTH 1 /* IN2R_MUTE */
+#define WM8993_IN2R_ZC 0x0040 /* IN2R_ZC */
+#define WM8993_IN2R_ZC_MASK 0x0040 /* IN2R_ZC */
+#define WM8993_IN2R_ZC_SHIFT 6 /* IN2R_ZC */
+#define WM8993_IN2R_ZC_WIDTH 1 /* IN2R_ZC */
+#define WM8993_IN2R_VOL_MASK 0x001F /* IN2R_VOL - [4:0] */
+#define WM8993_IN2R_VOL_SHIFT 0 /* IN2R_VOL - [4:0] */
+#define WM8993_IN2R_VOL_WIDTH 5 /* IN2R_VOL - [4:0] */
+
+/*
+ * R28 (0x1C) - Left Output Volume
+ */
+#define WM8993_HPOUT1_VU 0x0100 /* HPOUT1_VU */
+#define WM8993_HPOUT1_VU_MASK 0x0100 /* HPOUT1_VU */
+#define WM8993_HPOUT1_VU_SHIFT 8 /* HPOUT1_VU */
+#define WM8993_HPOUT1_VU_WIDTH 1 /* HPOUT1_VU */
+#define WM8993_HPOUT1L_ZC 0x0080 /* HPOUT1L_ZC */
+#define WM8993_HPOUT1L_ZC_MASK 0x0080 /* HPOUT1L_ZC */
+#define WM8993_HPOUT1L_ZC_SHIFT 7 /* HPOUT1L_ZC */
+#define WM8993_HPOUT1L_ZC_WIDTH 1 /* HPOUT1L_ZC */
+#define WM8993_HPOUT1L_MUTE_N 0x0040 /* HPOUT1L_MUTE_N */
+#define WM8993_HPOUT1L_MUTE_N_MASK 0x0040 /* HPOUT1L_MUTE_N */
+#define WM8993_HPOUT1L_MUTE_N_SHIFT 6 /* HPOUT1L_MUTE_N */
+#define WM8993_HPOUT1L_MUTE_N_WIDTH 1 /* HPOUT1L_MUTE_N */
+#define WM8993_HPOUT1L_VOL_MASK 0x003F /* HPOUT1L_VOL - [5:0] */
+#define WM8993_HPOUT1L_VOL_SHIFT 0 /* HPOUT1L_VOL - [5:0] */
+#define WM8993_HPOUT1L_VOL_WIDTH 6 /* HPOUT1L_VOL - [5:0] */
+
+/*
+ * R29 (0x1D) - Right Output Volume
+ */
+#define WM8993_HPOUT1_VU 0x0100 /* HPOUT1_VU */
+#define WM8993_HPOUT1_VU_MASK 0x0100 /* HPOUT1_VU */
+#define WM8993_HPOUT1_VU_SHIFT 8 /* HPOUT1_VU */
+#define WM8993_HPOUT1_VU_WIDTH 1 /* HPOUT1_VU */
+#define WM8993_HPOUT1R_ZC 0x0080 /* HPOUT1R_ZC */
+#define WM8993_HPOUT1R_ZC_MASK 0x0080 /* HPOUT1R_ZC */
+#define WM8993_HPOUT1R_ZC_SHIFT 7 /* HPOUT1R_ZC */
+#define WM8993_HPOUT1R_ZC_WIDTH 1 /* HPOUT1R_ZC */
+#define WM8993_HPOUT1R_MUTE_N 0x0040 /* HPOUT1R_MUTE_N */
+#define WM8993_HPOUT1R_MUTE_N_MASK 0x0040 /* HPOUT1R_MUTE_N */
+#define WM8993_HPOUT1R_MUTE_N_SHIFT 6 /* HPOUT1R_MUTE_N */
+#define WM8993_HPOUT1R_MUTE_N_WIDTH 1 /* HPOUT1R_MUTE_N */
+#define WM8993_HPOUT1R_VOL_MASK 0x003F /* HPOUT1R_VOL - [5:0] */
+#define WM8993_HPOUT1R_VOL_SHIFT 0 /* HPOUT1R_VOL - [5:0] */
+#define WM8993_HPOUT1R_VOL_WIDTH 6 /* HPOUT1R_VOL - [5:0] */
+
+/*
+ * R30 (0x1E) - Line Outputs Volume
+ */
+#define WM8993_LINEOUT1N_MUTE 0x0040 /* LINEOUT1N_MUTE */
+#define WM8993_LINEOUT1N_MUTE_MASK 0x0040 /* LINEOUT1N_MUTE */
+#define WM8993_LINEOUT1N_MUTE_SHIFT 6 /* LINEOUT1N_MUTE */
+#define WM8993_LINEOUT1N_MUTE_WIDTH 1 /* LINEOUT1N_MUTE */
+#define WM8993_LINEOUT1P_MUTE 0x0020 /* LINEOUT1P_MUTE */
+#define WM8993_LINEOUT1P_MUTE_MASK 0x0020 /* LINEOUT1P_MUTE */
+#define WM8993_LINEOUT1P_MUTE_SHIFT 5 /* LINEOUT1P_MUTE */
+#define WM8993_LINEOUT1P_MUTE_WIDTH 1 /* LINEOUT1P_MUTE */
+#define WM8993_LINEOUT1_VOL 0x0010 /* LINEOUT1_VOL */
+#define WM8993_LINEOUT1_VOL_MASK 0x0010 /* LINEOUT1_VOL */
+#define WM8993_LINEOUT1_VOL_SHIFT 4 /* LINEOUT1_VOL */
+#define WM8993_LINEOUT1_VOL_WIDTH 1 /* LINEOUT1_VOL */
+#define WM8993_LINEOUT2N_MUTE 0x0004 /* LINEOUT2N_MUTE */
+#define WM8993_LINEOUT2N_MUTE_MASK 0x0004 /* LINEOUT2N_MUTE */
+#define WM8993_LINEOUT2N_MUTE_SHIFT 2 /* LINEOUT2N_MUTE */
+#define WM8993_LINEOUT2N_MUTE_WIDTH 1 /* LINEOUT2N_MUTE */
+#define WM8993_LINEOUT2P_MUTE 0x0002 /* LINEOUT2P_MUTE */
+#define WM8993_LINEOUT2P_MUTE_MASK 0x0002 /* LINEOUT2P_MUTE */
+#define WM8993_LINEOUT2P_MUTE_SHIFT 1 /* LINEOUT2P_MUTE */
+#define WM8993_LINEOUT2P_MUTE_WIDTH 1 /* LINEOUT2P_MUTE */
+#define WM8993_LINEOUT2_VOL 0x0001 /* LINEOUT2_VOL */
+#define WM8993_LINEOUT2_VOL_MASK 0x0001 /* LINEOUT2_VOL */
+#define WM8993_LINEOUT2_VOL_SHIFT 0 /* LINEOUT2_VOL */
+#define WM8993_LINEOUT2_VOL_WIDTH 1 /* LINEOUT2_VOL */
+
+/*
+ * R31 (0x1F) - HPOUT2 Volume
+ */
+#define WM8993_HPOUT2_MUTE 0x0020 /* HPOUT2_MUTE */
+#define WM8993_HPOUT2_MUTE_MASK 0x0020 /* HPOUT2_MUTE */
+#define WM8993_HPOUT2_MUTE_SHIFT 5 /* HPOUT2_MUTE */
+#define WM8993_HPOUT2_MUTE_WIDTH 1 /* HPOUT2_MUTE */
+#define WM8993_HPOUT2_VOL 0x0010 /* HPOUT2_VOL */
+#define WM8993_HPOUT2_VOL_MASK 0x0010 /* HPOUT2_VOL */
+#define WM8993_HPOUT2_VOL_SHIFT 4 /* HPOUT2_VOL */
+#define WM8993_HPOUT2_VOL_WIDTH 1 /* HPOUT2_VOL */
+
+/*
+ * R32 (0x20) - Left OPGA Volume
+ */
+#define WM8993_MIXOUT_VU 0x0100 /* MIXOUT_VU */
+#define WM8993_MIXOUT_VU_MASK 0x0100 /* MIXOUT_VU */
+#define WM8993_MIXOUT_VU_SHIFT 8 /* MIXOUT_VU */
+#define WM8993_MIXOUT_VU_WIDTH 1 /* MIXOUT_VU */
+#define WM8993_MIXOUTL_ZC 0x0080 /* MIXOUTL_ZC */
+#define WM8993_MIXOUTL_ZC_MASK 0x0080 /* MIXOUTL_ZC */
+#define WM8993_MIXOUTL_ZC_SHIFT 7 /* MIXOUTL_ZC */
+#define WM8993_MIXOUTL_ZC_WIDTH 1 /* MIXOUTL_ZC */
+#define WM8993_MIXOUTL_MUTE_N 0x0040 /* MIXOUTL_MUTE_N */
+#define WM8993_MIXOUTL_MUTE_N_MASK 0x0040 /* MIXOUTL_MUTE_N */
+#define WM8993_MIXOUTL_MUTE_N_SHIFT 6 /* MIXOUTL_MUTE_N */
+#define WM8993_MIXOUTL_MUTE_N_WIDTH 1 /* MIXOUTL_MUTE_N */
+#define WM8993_MIXOUTL_VOL_MASK 0x003F /* MIXOUTL_VOL - [5:0] */
+#define WM8993_MIXOUTL_VOL_SHIFT 0 /* MIXOUTL_VOL - [5:0] */
+#define WM8993_MIXOUTL_VOL_WIDTH 6 /* MIXOUTL_VOL - [5:0] */
+
+/*
+ * R33 (0x21) - Right OPGA Volume
+ */
+#define WM8993_MIXOUT_VU 0x0100 /* MIXOUT_VU */
+#define WM8993_MIXOUT_VU_MASK 0x0100 /* MIXOUT_VU */
+#define WM8993_MIXOUT_VU_SHIFT 8 /* MIXOUT_VU */
+#define WM8993_MIXOUT_VU_WIDTH 1 /* MIXOUT_VU */
+#define WM8993_MIXOUTR_ZC 0x0080 /* MIXOUTR_ZC */
+#define WM8993_MIXOUTR_ZC_MASK 0x0080 /* MIXOUTR_ZC */
+#define WM8993_MIXOUTR_ZC_SHIFT 7 /* MIXOUTR_ZC */
+#define WM8993_MIXOUTR_ZC_WIDTH 1 /* MIXOUTR_ZC */
+#define WM8993_MIXOUTR_MUTE_N 0x0040 /* MIXOUTR_MUTE_N */
+#define WM8993_MIXOUTR_MUTE_N_MASK 0x0040 /* MIXOUTR_MUTE_N */
+#define WM8993_MIXOUTR_MUTE_N_SHIFT 6 /* MIXOUTR_MUTE_N */
+#define WM8993_MIXOUTR_MUTE_N_WIDTH 1 /* MIXOUTR_MUTE_N */
+#define WM8993_MIXOUTR_VOL_MASK 0x003F /* MIXOUTR_VOL - [5:0] */
+#define WM8993_MIXOUTR_VOL_SHIFT 0 /* MIXOUTR_VOL - [5:0] */
+#define WM8993_MIXOUTR_VOL_WIDTH 6 /* MIXOUTR_VOL - [5:0] */
+
+/*
+ * R34 (0x22) - SPKMIXL Attenuation
+ */
+#define WM8993_MIXINL_SPKMIXL_VOL 0x0020 /* MIXINL_SPKMIXL_VOL */
+#define WM8993_MIXINL_SPKMIXL_VOL_MASK 0x0020 /* MIXINL_SPKMIXL_VOL */
+#define WM8993_MIXINL_SPKMIXL_VOL_SHIFT 5 /* MIXINL_SPKMIXL_VOL */
+#define WM8993_MIXINL_SPKMIXL_VOL_WIDTH 1 /* MIXINL_SPKMIXL_VOL */
+#define WM8993_IN1LP_SPKMIXL_VOL 0x0010 /* IN1LP_SPKMIXL_VOL */
+#define WM8993_IN1LP_SPKMIXL_VOL_MASK 0x0010 /* IN1LP_SPKMIXL_VOL */
+#define WM8993_IN1LP_SPKMIXL_VOL_SHIFT 4 /* IN1LP_SPKMIXL_VOL */
+#define WM8993_IN1LP_SPKMIXL_VOL_WIDTH 1 /* IN1LP_SPKMIXL_VOL */
+#define WM8993_MIXOUTL_SPKMIXL_VOL 0x0008 /* MIXOUTL_SPKMIXL_VOL */
+#define WM8993_MIXOUTL_SPKMIXL_VOL_MASK 0x0008 /* MIXOUTL_SPKMIXL_VOL */
+#define WM8993_MIXOUTL_SPKMIXL_VOL_SHIFT 3 /* MIXOUTL_SPKMIXL_VOL */
+#define WM8993_MIXOUTL_SPKMIXL_VOL_WIDTH 1 /* MIXOUTL_SPKMIXL_VOL */
+#define WM8993_DACL_SPKMIXL_VOL 0x0004 /* DACL_SPKMIXL_VOL */
+#define WM8993_DACL_SPKMIXL_VOL_MASK 0x0004 /* DACL_SPKMIXL_VOL */
+#define WM8993_DACL_SPKMIXL_VOL_SHIFT 2 /* DACL_SPKMIXL_VOL */
+#define WM8993_DACL_SPKMIXL_VOL_WIDTH 1 /* DACL_SPKMIXL_VOL */
+#define WM8993_SPKMIXL_VOL_MASK 0x0003 /* SPKMIXL_VOL - [1:0] */
+#define WM8993_SPKMIXL_VOL_SHIFT 0 /* SPKMIXL_VOL - [1:0] */
+#define WM8993_SPKMIXL_VOL_WIDTH 2 /* SPKMIXL_VOL - [1:0] */
+
+/*
+ * R35 (0x23) - SPKMIXR Attenuation
+ */
+#define WM8993_SPKOUT_CLASSAB_MODE 0x0100 /* SPKOUT_CLASSAB_MODE */
+#define WM8993_SPKOUT_CLASSAB_MODE_MASK 0x0100 /* SPKOUT_CLASSAB_MODE */
+#define WM8993_SPKOUT_CLASSAB_MODE_SHIFT 8 /* SPKOUT_CLASSAB_MODE */
+#define WM8993_SPKOUT_CLASSAB_MODE_WIDTH 1 /* SPKOUT_CLASSAB_MODE */
+#define WM8993_MIXINR_SPKMIXR_VOL 0x0020 /* MIXINR_SPKMIXR_VOL */
+#define WM8993_MIXINR_SPKMIXR_VOL_MASK 0x0020 /* MIXINR_SPKMIXR_VOL */
+#define WM8993_MIXINR_SPKMIXR_VOL_SHIFT 5 /* MIXINR_SPKMIXR_VOL */
+#define WM8993_MIXINR_SPKMIXR_VOL_WIDTH 1 /* MIXINR_SPKMIXR_VOL */
+#define WM8993_IN1RP_SPKMIXR_VOL 0x0010 /* IN1RP_SPKMIXR_VOL */
+#define WM8993_IN1RP_SPKMIXR_VOL_MASK 0x0010 /* IN1RP_SPKMIXR_VOL */
+#define WM8993_IN1RP_SPKMIXR_VOL_SHIFT 4 /* IN1RP_SPKMIXR_VOL */
+#define WM8993_IN1RP_SPKMIXR_VOL_WIDTH 1 /* IN1RP_SPKMIXR_VOL */
+#define WM8993_MIXOUTR_SPKMIXR_VOL 0x0008 /* MIXOUTR_SPKMIXR_VOL */
+#define WM8993_MIXOUTR_SPKMIXR_VOL_MASK 0x0008 /* MIXOUTR_SPKMIXR_VOL */
+#define WM8993_MIXOUTR_SPKMIXR_VOL_SHIFT 3 /* MIXOUTR_SPKMIXR_VOL */
+#define WM8993_MIXOUTR_SPKMIXR_VOL_WIDTH 1 /* MIXOUTR_SPKMIXR_VOL */
+#define WM8993_DACR_SPKMIXR_VOL 0x0004 /* DACR_SPKMIXR_VOL */
+#define WM8993_DACR_SPKMIXR_VOL_MASK 0x0004 /* DACR_SPKMIXR_VOL */
+#define WM8993_DACR_SPKMIXR_VOL_SHIFT 2 /* DACR_SPKMIXR_VOL */
+#define WM8993_DACR_SPKMIXR_VOL_WIDTH 1 /* DACR_SPKMIXR_VOL */
+#define WM8993_SPKMIXR_VOL_MASK 0x0003 /* SPKMIXR_VOL - [1:0] */
+#define WM8993_SPKMIXR_VOL_SHIFT 0 /* SPKMIXR_VOL - [1:0] */
+#define WM8993_SPKMIXR_VOL_WIDTH 2 /* SPKMIXR_VOL - [1:0] */
+
+/*
+ * R36 (0x24) - SPKOUT Mixers
+ */
+#define WM8993_VRX_TO_SPKOUTL 0x0020 /* VRX_TO_SPKOUTL */
+#define WM8993_VRX_TO_SPKOUTL_MASK 0x0020 /* VRX_TO_SPKOUTL */
+#define WM8993_VRX_TO_SPKOUTL_SHIFT 5 /* VRX_TO_SPKOUTL */
+#define WM8993_VRX_TO_SPKOUTL_WIDTH 1 /* VRX_TO_SPKOUTL */
+#define WM8993_SPKMIXL_TO_SPKOUTL 0x0010 /* SPKMIXL_TO_SPKOUTL */
+#define WM8993_SPKMIXL_TO_SPKOUTL_MASK 0x0010 /* SPKMIXL_TO_SPKOUTL */
+#define WM8993_SPKMIXL_TO_SPKOUTL_SHIFT 4 /* SPKMIXL_TO_SPKOUTL */
+#define WM8993_SPKMIXL_TO_SPKOUTL_WIDTH 1 /* SPKMIXL_TO_SPKOUTL */
+#define WM8993_SPKMIXR_TO_SPKOUTL 0x0008 /* SPKMIXR_TO_SPKOUTL */
+#define WM8993_SPKMIXR_TO_SPKOUTL_MASK 0x0008 /* SPKMIXR_TO_SPKOUTL */
+#define WM8993_SPKMIXR_TO_SPKOUTL_SHIFT 3 /* SPKMIXR_TO_SPKOUTL */
+#define WM8993_SPKMIXR_TO_SPKOUTL_WIDTH 1 /* SPKMIXR_TO_SPKOUTL */
+#define WM8993_VRX_TO_SPKOUTR 0x0004 /* VRX_TO_SPKOUTR */
+#define WM8993_VRX_TO_SPKOUTR_MASK 0x0004 /* VRX_TO_SPKOUTR */
+#define WM8993_VRX_TO_SPKOUTR_SHIFT 2 /* VRX_TO_SPKOUTR */
+#define WM8993_VRX_TO_SPKOUTR_WIDTH 1 /* VRX_TO_SPKOUTR */
+#define WM8993_SPKMIXL_TO_SPKOUTR 0x0002 /* SPKMIXL_TO_SPKOUTR */
+#define WM8993_SPKMIXL_TO_SPKOUTR_MASK 0x0002 /* SPKMIXL_TO_SPKOUTR */
+#define WM8993_SPKMIXL_TO_SPKOUTR_SHIFT 1 /* SPKMIXL_TO_SPKOUTR */
+#define WM8993_SPKMIXL_TO_SPKOUTR_WIDTH 1 /* SPKMIXL_TO_SPKOUTR */
+#define WM8993_SPKMIXR_TO_SPKOUTR 0x0001 /* SPKMIXR_TO_SPKOUTR */
+#define WM8993_SPKMIXR_TO_SPKOUTR_MASK 0x0001 /* SPKMIXR_TO_SPKOUTR */
+#define WM8993_SPKMIXR_TO_SPKOUTR_SHIFT 0 /* SPKMIXR_TO_SPKOUTR */
+#define WM8993_SPKMIXR_TO_SPKOUTR_WIDTH 1 /* SPKMIXR_TO_SPKOUTR */
+
+/*
+ * R37 (0x25) - SPKOUT Boost
+ */
+#define WM8993_SPKOUTL_BOOST_MASK 0x0038 /* SPKOUTL_BOOST - [5:3] */
+#define WM8993_SPKOUTL_BOOST_SHIFT 3 /* SPKOUTL_BOOST - [5:3] */
+#define WM8993_SPKOUTL_BOOST_WIDTH 3 /* SPKOUTL_BOOST - [5:3] */
+#define WM8993_SPKOUTR_BOOST_MASK 0x0007 /* SPKOUTR_BOOST - [2:0] */
+#define WM8993_SPKOUTR_BOOST_SHIFT 0 /* SPKOUTR_BOOST - [2:0] */
+#define WM8993_SPKOUTR_BOOST_WIDTH 3 /* SPKOUTR_BOOST - [2:0] */
+
+/*
+ * R38 (0x26) - Speaker Volume Left
+ */
+#define WM8993_SPKOUT_VU 0x0100 /* SPKOUT_VU */
+#define WM8993_SPKOUT_VU_MASK 0x0100 /* SPKOUT_VU */
+#define WM8993_SPKOUT_VU_SHIFT 8 /* SPKOUT_VU */
+#define WM8993_SPKOUT_VU_WIDTH 1 /* SPKOUT_VU */
+#define WM8993_SPKOUTL_ZC 0x0080 /* SPKOUTL_ZC */
+#define WM8993_SPKOUTL_ZC_MASK 0x0080 /* SPKOUTL_ZC */
+#define WM8993_SPKOUTL_ZC_SHIFT 7 /* SPKOUTL_ZC */
+#define WM8993_SPKOUTL_ZC_WIDTH 1 /* SPKOUTL_ZC */
+#define WM8993_SPKOUTL_MUTE_N 0x0040 /* SPKOUTL_MUTE_N */
+#define WM8993_SPKOUTL_MUTE_N_MASK 0x0040 /* SPKOUTL_MUTE_N */
+#define WM8993_SPKOUTL_MUTE_N_SHIFT 6 /* SPKOUTL_MUTE_N */
+#define WM8993_SPKOUTL_MUTE_N_WIDTH 1 /* SPKOUTL_MUTE_N */
+#define WM8993_SPKOUTL_VOL_MASK 0x003F /* SPKOUTL_VOL - [5:0] */
+#define WM8993_SPKOUTL_VOL_SHIFT 0 /* SPKOUTL_VOL - [5:0] */
+#define WM8993_SPKOUTL_VOL_WIDTH 6 /* SPKOUTL_VOL - [5:0] */
+
+/*
+ * R39 (0x27) - Speaker Volume Right
+ */
+#define WM8993_SPKOUT_VU 0x0100 /* SPKOUT_VU */
+#define WM8993_SPKOUT_VU_MASK 0x0100 /* SPKOUT_VU */
+#define WM8993_SPKOUT_VU_SHIFT 8 /* SPKOUT_VU */
+#define WM8993_SPKOUT_VU_WIDTH 1 /* SPKOUT_VU */
+#define WM8993_SPKOUTR_ZC 0x0080 /* SPKOUTR_ZC */
+#define WM8993_SPKOUTR_ZC_MASK 0x0080 /* SPKOUTR_ZC */
+#define WM8993_SPKOUTR_ZC_SHIFT 7 /* SPKOUTR_ZC */
+#define WM8993_SPKOUTR_ZC_WIDTH 1 /* SPKOUTR_ZC */
+#define WM8993_SPKOUTR_MUTE_N 0x0040 /* SPKOUTR_MUTE_N */
+#define WM8993_SPKOUTR_MUTE_N_MASK 0x0040 /* SPKOUTR_MUTE_N */
+#define WM8993_SPKOUTR_MUTE_N_SHIFT 6 /* SPKOUTR_MUTE_N */
+#define WM8993_SPKOUTR_MUTE_N_WIDTH 1 /* SPKOUTR_MUTE_N */
+#define WM8993_SPKOUTR_VOL_MASK 0x003F /* SPKOUTR_VOL - [5:0] */
+#define WM8993_SPKOUTR_VOL_SHIFT 0 /* SPKOUTR_VOL - [5:0] */
+#define WM8993_SPKOUTR_VOL_WIDTH 6 /* SPKOUTR_VOL - [5:0] */
+
+/*
+ * R40 (0x28) - Input Mixer2
+ */
+#define WM8993_IN2LP_TO_IN2L 0x0080 /* IN2LP_TO_IN2L */
+#define WM8993_IN2LP_TO_IN2L_MASK 0x0080 /* IN2LP_TO_IN2L */
+#define WM8993_IN2LP_TO_IN2L_SHIFT 7 /* IN2LP_TO_IN2L */
+#define WM8993_IN2LP_TO_IN2L_WIDTH 1 /* IN2LP_TO_IN2L */
+#define WM8993_IN2LN_TO_IN2L 0x0040 /* IN2LN_TO_IN2L */
+#define WM8993_IN2LN_TO_IN2L_MASK 0x0040 /* IN2LN_TO_IN2L */
+#define WM8993_IN2LN_TO_IN2L_SHIFT 6 /* IN2LN_TO_IN2L */
+#define WM8993_IN2LN_TO_IN2L_WIDTH 1 /* IN2LN_TO_IN2L */
+#define WM8993_IN1LP_TO_IN1L 0x0020 /* IN1LP_TO_IN1L */
+#define WM8993_IN1LP_TO_IN1L_MASK 0x0020 /* IN1LP_TO_IN1L */
+#define WM8993_IN1LP_TO_IN1L_SHIFT 5 /* IN1LP_TO_IN1L */
+#define WM8993_IN1LP_TO_IN1L_WIDTH 1 /* IN1LP_TO_IN1L */
+#define WM8993_IN1LN_TO_IN1L 0x0010 /* IN1LN_TO_IN1L */
+#define WM8993_IN1LN_TO_IN1L_MASK 0x0010 /* IN1LN_TO_IN1L */
+#define WM8993_IN1LN_TO_IN1L_SHIFT 4 /* IN1LN_TO_IN1L */
+#define WM8993_IN1LN_TO_IN1L_WIDTH 1 /* IN1LN_TO_IN1L */
+#define WM8993_IN2RP_TO_IN2R 0x0008 /* IN2RP_TO_IN2R */
+#define WM8993_IN2RP_TO_IN2R_MASK 0x0008 /* IN2RP_TO_IN2R */
+#define WM8993_IN2RP_TO_IN2R_SHIFT 3 /* IN2RP_TO_IN2R */
+#define WM8993_IN2RP_TO_IN2R_WIDTH 1 /* IN2RP_TO_IN2R */
+#define WM8993_IN2RN_TO_IN2R 0x0004 /* IN2RN_TO_IN2R */
+#define WM8993_IN2RN_TO_IN2R_MASK 0x0004 /* IN2RN_TO_IN2R */
+#define WM8993_IN2RN_TO_IN2R_SHIFT 2 /* IN2RN_TO_IN2R */
+#define WM8993_IN2RN_TO_IN2R_WIDTH 1 /* IN2RN_TO_IN2R */
+#define WM8993_IN1RP_TO_IN1R 0x0002 /* IN1RP_TO_IN1R */
+#define WM8993_IN1RP_TO_IN1R_MASK 0x0002 /* IN1RP_TO_IN1R */
+#define WM8993_IN1RP_TO_IN1R_SHIFT 1 /* IN1RP_TO_IN1R */
+#define WM8993_IN1RP_TO_IN1R_WIDTH 1 /* IN1RP_TO_IN1R */
+#define WM8993_IN1RN_TO_IN1R 0x0001 /* IN1RN_TO_IN1R */
+#define WM8993_IN1RN_TO_IN1R_MASK 0x0001 /* IN1RN_TO_IN1R */
+#define WM8993_IN1RN_TO_IN1R_SHIFT 0 /* IN1RN_TO_IN1R */
+#define WM8993_IN1RN_TO_IN1R_WIDTH 1 /* IN1RN_TO_IN1R */
+
+/*
+ * R41 (0x29) - Input Mixer3
+ */
+#define WM8993_IN2L_TO_MIXINL 0x0100 /* IN2L_TO_MIXINL */
+#define WM8993_IN2L_TO_MIXINL_MASK 0x0100 /* IN2L_TO_MIXINL */
+#define WM8993_IN2L_TO_MIXINL_SHIFT 8 /* IN2L_TO_MIXINL */
+#define WM8993_IN2L_TO_MIXINL_WIDTH 1 /* IN2L_TO_MIXINL */
+#define WM8993_IN2L_MIXINL_VOL 0x0080 /* IN2L_MIXINL_VOL */
+#define WM8993_IN2L_MIXINL_VOL_MASK 0x0080 /* IN2L_MIXINL_VOL */
+#define WM8993_IN2L_MIXINL_VOL_SHIFT 7 /* IN2L_MIXINL_VOL */
+#define WM8993_IN2L_MIXINL_VOL_WIDTH 1 /* IN2L_MIXINL_VOL */
+#define WM8993_IN1L_TO_MIXINL 0x0020 /* IN1L_TO_MIXINL */
+#define WM8993_IN1L_TO_MIXINL_MASK 0x0020 /* IN1L_TO_MIXINL */
+#define WM8993_IN1L_TO_MIXINL_SHIFT 5 /* IN1L_TO_MIXINL */
+#define WM8993_IN1L_TO_MIXINL_WIDTH 1 /* IN1L_TO_MIXINL */
+#define WM8993_IN1L_MIXINL_VOL 0x0010 /* IN1L_MIXINL_VOL */
+#define WM8993_IN1L_MIXINL_VOL_MASK 0x0010 /* IN1L_MIXINL_VOL */
+#define WM8993_IN1L_MIXINL_VOL_SHIFT 4 /* IN1L_MIXINL_VOL */
+#define WM8993_IN1L_MIXINL_VOL_WIDTH 1 /* IN1L_MIXINL_VOL */
+#define WM8993_MIXOUTL_MIXINL_VOL_MASK 0x0007 /* MIXOUTL_MIXINL_VOL - [2:0] */
+#define WM8993_MIXOUTL_MIXINL_VOL_SHIFT 0 /* MIXOUTL_MIXINL_VOL - [2:0] */
+#define WM8993_MIXOUTL_MIXINL_VOL_WIDTH 3 /* MIXOUTL_MIXINL_VOL - [2:0] */
+
+/*
+ * R42 (0x2A) - Input Mixer4
+ */
+#define WM8993_IN2R_TO_MIXINR 0x0100 /* IN2R_TO_MIXINR */
+#define WM8993_IN2R_TO_MIXINR_MASK 0x0100 /* IN2R_TO_MIXINR */
+#define WM8993_IN2R_TO_MIXINR_SHIFT 8 /* IN2R_TO_MIXINR */
+#define WM8993_IN2R_TO_MIXINR_WIDTH 1 /* IN2R_TO_MIXINR */
+#define WM8993_IN2R_MIXINR_VOL 0x0080 /* IN2R_MIXINR_VOL */
+#define WM8993_IN2R_MIXINR_VOL_MASK 0x0080 /* IN2R_MIXINR_VOL */
+#define WM8993_IN2R_MIXINR_VOL_SHIFT 7 /* IN2R_MIXINR_VOL */
+#define WM8993_IN2R_MIXINR_VOL_WIDTH 1 /* IN2R_MIXINR_VOL */
+#define WM8993_IN1R_TO_MIXINR 0x0020 /* IN1R_TO_MIXINR */
+#define WM8993_IN1R_TO_MIXINR_MASK 0x0020 /* IN1R_TO_MIXINR */
+#define WM8993_IN1R_TO_MIXINR_SHIFT 5 /* IN1R_TO_MIXINR */
+#define WM8993_IN1R_TO_MIXINR_WIDTH 1 /* IN1R_TO_MIXINR */
+#define WM8993_IN1R_MIXINR_VOL 0x0010 /* IN1R_MIXINR_VOL */
+#define WM8993_IN1R_MIXINR_VOL_MASK 0x0010 /* IN1R_MIXINR_VOL */
+#define WM8993_IN1R_MIXINR_VOL_SHIFT 4 /* IN1R_MIXINR_VOL */
+#define WM8993_IN1R_MIXINR_VOL_WIDTH 1 /* IN1R_MIXINR_VOL */
+#define WM8993_MIXOUTR_MIXINR_VOL_MASK 0x0007 /* MIXOUTR_MIXINR_VOL - [2:0] */
+#define WM8993_MIXOUTR_MIXINR_VOL_SHIFT 0 /* MIXOUTR_MIXINR_VOL - [2:0] */
+#define WM8993_MIXOUTR_MIXINR_VOL_WIDTH 3 /* MIXOUTR_MIXINR_VOL - [2:0] */
+
+/*
+ * R43 (0x2B) - Input Mixer5
+ */
+#define WM8993_IN1LP_MIXINL_VOL_MASK 0x01C0 /* IN1LP_MIXINL_VOL - [8:6] */
+#define WM8993_IN1LP_MIXINL_VOL_SHIFT 6 /* IN1LP_MIXINL_VOL - [8:6] */
+#define WM8993_IN1LP_MIXINL_VOL_WIDTH 3 /* IN1LP_MIXINL_VOL - [8:6] */
+#define WM8993_VRX_MIXINL_VOL_MASK 0x0007 /* VRX_MIXINL_VOL - [2:0] */
+#define WM8993_VRX_MIXINL_VOL_SHIFT 0 /* VRX_MIXINL_VOL - [2:0] */
+#define WM8993_VRX_MIXINL_VOL_WIDTH 3 /* VRX_MIXINL_VOL - [2:0] */
+
+/*
+ * R44 (0x2C) - Input Mixer6
+ */
+#define WM8993_IN1RP_MIXINR_VOL_MASK 0x01C0 /* IN1RP_MIXINR_VOL - [8:6] */
+#define WM8993_IN1RP_MIXINR_VOL_SHIFT 6 /* IN1RP_MIXINR_VOL - [8:6] */
+#define WM8993_IN1RP_MIXINR_VOL_WIDTH 3 /* IN1RP_MIXINR_VOL - [8:6] */
+#define WM8993_VRX_MIXINR_VOL_MASK 0x0007 /* VRX_MIXINR_VOL - [2:0] */
+#define WM8993_VRX_MIXINR_VOL_SHIFT 0 /* VRX_MIXINR_VOL - [2:0] */
+#define WM8993_VRX_MIXINR_VOL_WIDTH 3 /* VRX_MIXINR_VOL - [2:0] */
+
+/*
+ * R45 (0x2D) - Output Mixer1
+ */
+#define WM8993_DACL_TO_HPOUT1L 0x0100 /* DACL_TO_HPOUT1L */
+#define WM8993_DACL_TO_HPOUT1L_MASK 0x0100 /* DACL_TO_HPOUT1L */
+#define WM8993_DACL_TO_HPOUT1L_SHIFT 8 /* DACL_TO_HPOUT1L */
+#define WM8993_DACL_TO_HPOUT1L_WIDTH 1 /* DACL_TO_HPOUT1L */
+#define WM8993_MIXINR_TO_MIXOUTL 0x0080 /* MIXINR_TO_MIXOUTL */
+#define WM8993_MIXINR_TO_MIXOUTL_MASK 0x0080 /* MIXINR_TO_MIXOUTL */
+#define WM8993_MIXINR_TO_MIXOUTL_SHIFT 7 /* MIXINR_TO_MIXOUTL */
+#define WM8993_MIXINR_TO_MIXOUTL_WIDTH 1 /* MIXINR_TO_MIXOUTL */
+#define WM8993_MIXINL_TO_MIXOUTL 0x0040 /* MIXINL_TO_MIXOUTL */
+#define WM8993_MIXINL_TO_MIXOUTL_MASK 0x0040 /* MIXINL_TO_MIXOUTL */
+#define WM8993_MIXINL_TO_MIXOUTL_SHIFT 6 /* MIXINL_TO_MIXOUTL */
+#define WM8993_MIXINL_TO_MIXOUTL_WIDTH 1 /* MIXINL_TO_MIXOUTL */
+#define WM8993_IN2RN_TO_MIXOUTL 0x0020 /* IN2RN_TO_MIXOUTL */
+#define WM8993_IN2RN_TO_MIXOUTL_MASK 0x0020 /* IN2RN_TO_MIXOUTL */
+#define WM8993_IN2RN_TO_MIXOUTL_SHIFT 5 /* IN2RN_TO_MIXOUTL */
+#define WM8993_IN2RN_TO_MIXOUTL_WIDTH 1 /* IN2RN_TO_MIXOUTL */
+#define WM8993_IN2LN_TO_MIXOUTL 0x0010 /* IN2LN_TO_MIXOUTL */
+#define WM8993_IN2LN_TO_MIXOUTL_MASK 0x0010 /* IN2LN_TO_MIXOUTL */
+#define WM8993_IN2LN_TO_MIXOUTL_SHIFT 4 /* IN2LN_TO_MIXOUTL */
+#define WM8993_IN2LN_TO_MIXOUTL_WIDTH 1 /* IN2LN_TO_MIXOUTL */
+#define WM8993_IN1R_TO_MIXOUTL 0x0008 /* IN1R_TO_MIXOUTL */
+#define WM8993_IN1R_TO_MIXOUTL_MASK 0x0008 /* IN1R_TO_MIXOUTL */
+#define WM8993_IN1R_TO_MIXOUTL_SHIFT 3 /* IN1R_TO_MIXOUTL */
+#define WM8993_IN1R_TO_MIXOUTL_WIDTH 1 /* IN1R_TO_MIXOUTL */
+#define WM8993_IN1L_TO_MIXOUTL 0x0004 /* IN1L_TO_MIXOUTL */
+#define WM8993_IN1L_TO_MIXOUTL_MASK 0x0004 /* IN1L_TO_MIXOUTL */
+#define WM8993_IN1L_TO_MIXOUTL_SHIFT 2 /* IN1L_TO_MIXOUTL */
+#define WM8993_IN1L_TO_MIXOUTL_WIDTH 1 /* IN1L_TO_MIXOUTL */
+#define WM8993_IN2LP_TO_MIXOUTL 0x0002 /* IN2LP_TO_MIXOUTL */
+#define WM8993_IN2LP_TO_MIXOUTL_MASK 0x0002 /* IN2LP_TO_MIXOUTL */
+#define WM8993_IN2LP_TO_MIXOUTL_SHIFT 1 /* IN2LP_TO_MIXOUTL */
+#define WM8993_IN2LP_TO_MIXOUTL_WIDTH 1 /* IN2LP_TO_MIXOUTL */
+#define WM8993_DACL_TO_MIXOUTL 0x0001 /* DACL_TO_MIXOUTL */
+#define WM8993_DACL_TO_MIXOUTL_MASK 0x0001 /* DACL_TO_MIXOUTL */
+#define WM8993_DACL_TO_MIXOUTL_SHIFT 0 /* DACL_TO_MIXOUTL */
+#define WM8993_DACL_TO_MIXOUTL_WIDTH 1 /* DACL_TO_MIXOUTL */
+
+/*
+ * R46 (0x2E) - Output Mixer2
+ */
+#define WM8993_DACR_TO_HPOUT1R 0x0100 /* DACR_TO_HPOUT1R */
+#define WM8993_DACR_TO_HPOUT1R_MASK 0x0100 /* DACR_TO_HPOUT1R */
+#define WM8993_DACR_TO_HPOUT1R_SHIFT 8 /* DACR_TO_HPOUT1R */
+#define WM8993_DACR_TO_HPOUT1R_WIDTH 1 /* DACR_TO_HPOUT1R */
+#define WM8993_MIXINL_TO_MIXOUTR 0x0080 /* MIXINL_TO_MIXOUTR */
+#define WM8993_MIXINL_TO_MIXOUTR_MASK 0x0080 /* MIXINL_TO_MIXOUTR */
+#define WM8993_MIXINL_TO_MIXOUTR_SHIFT 7 /* MIXINL_TO_MIXOUTR */
+#define WM8993_MIXINL_TO_MIXOUTR_WIDTH 1 /* MIXINL_TO_MIXOUTR */
+#define WM8993_MIXINR_TO_MIXOUTR 0x0040 /* MIXINR_TO_MIXOUTR */
+#define WM8993_MIXINR_TO_MIXOUTR_MASK 0x0040 /* MIXINR_TO_MIXOUTR */
+#define WM8993_MIXINR_TO_MIXOUTR_SHIFT 6 /* MIXINR_TO_MIXOUTR */
+#define WM8993_MIXINR_TO_MIXOUTR_WIDTH 1 /* MIXINR_TO_MIXOUTR */
+#define WM8993_IN2LN_TO_MIXOUTR 0x0020 /* IN2LN_TO_MIXOUTR */
+#define WM8993_IN2LN_TO_MIXOUTR_MASK 0x0020 /* IN2LN_TO_MIXOUTR */
+#define WM8993_IN2LN_TO_MIXOUTR_SHIFT 5 /* IN2LN_TO_MIXOUTR */
+#define WM8993_IN2LN_TO_MIXOUTR_WIDTH 1 /* IN2LN_TO_MIXOUTR */
+#define WM8993_IN2RN_TO_MIXOUTR 0x0010 /* IN2RN_TO_MIXOUTR */
+#define WM8993_IN2RN_TO_MIXOUTR_MASK 0x0010 /* IN2RN_TO_MIXOUTR */
+#define WM8993_IN2RN_TO_MIXOUTR_SHIFT 4 /* IN2RN_TO_MIXOUTR */
+#define WM8993_IN2RN_TO_MIXOUTR_WIDTH 1 /* IN2RN_TO_MIXOUTR */
+#define WM8993_IN1L_TO_MIXOUTR 0x0008 /* IN1L_TO_MIXOUTR */
+#define WM8993_IN1L_TO_MIXOUTR_MASK 0x0008 /* IN1L_TO_MIXOUTR */
+#define WM8993_IN1L_TO_MIXOUTR_SHIFT 3 /* IN1L_TO_MIXOUTR */
+#define WM8993_IN1L_TO_MIXOUTR_WIDTH 1 /* IN1L_TO_MIXOUTR */
+#define WM8993_IN1R_TO_MIXOUTR 0x0004 /* IN1R_TO_MIXOUTR */
+#define WM8993_IN1R_TO_MIXOUTR_MASK 0x0004 /* IN1R_TO_MIXOUTR */
+#define WM8993_IN1R_TO_MIXOUTR_SHIFT 2 /* IN1R_TO_MIXOUTR */
+#define WM8993_IN1R_TO_MIXOUTR_WIDTH 1 /* IN1R_TO_MIXOUTR */
+#define WM8993_IN2RP_TO_MIXOUTR 0x0002 /* IN2RP_TO_MIXOUTR */
+#define WM8993_IN2RP_TO_MIXOUTR_MASK 0x0002 /* IN2RP_TO_MIXOUTR */
+#define WM8993_IN2RP_TO_MIXOUTR_SHIFT 1 /* IN2RP_TO_MIXOUTR */
+#define WM8993_IN2RP_TO_MIXOUTR_WIDTH 1 /* IN2RP_TO_MIXOUTR */
+#define WM8993_DACR_TO_MIXOUTR 0x0001 /* DACR_TO_MIXOUTR */
+#define WM8993_DACR_TO_MIXOUTR_MASK 0x0001 /* DACR_TO_MIXOUTR */
+#define WM8993_DACR_TO_MIXOUTR_SHIFT 0 /* DACR_TO_MIXOUTR */
+#define WM8993_DACR_TO_MIXOUTR_WIDTH 1 /* DACR_TO_MIXOUTR */
+
+/*
+ * R47 (0x2F) - Output Mixer3
+ */
+#define WM8993_IN2LP_MIXOUTL_VOL_MASK 0x0E00 /* IN2LP_MIXOUTL_VOL - [11:9] */
+#define WM8993_IN2LP_MIXOUTL_VOL_SHIFT 9 /* IN2LP_MIXOUTL_VOL - [11:9] */
+#define WM8993_IN2LP_MIXOUTL_VOL_WIDTH 3 /* IN2LP_MIXOUTL_VOL - [11:9] */
+#define WM8993_IN2LN_MIXOUTL_VOL_MASK 0x01C0 /* IN2LN_MIXOUTL_VOL - [8:6] */
+#define WM8993_IN2LN_MIXOUTL_VOL_SHIFT 6 /* IN2LN_MIXOUTL_VOL - [8:6] */
+#define WM8993_IN2LN_MIXOUTL_VOL_WIDTH 3 /* IN2LN_MIXOUTL_VOL - [8:6] */
+#define WM8993_IN1R_MIXOUTL_VOL_MASK 0x0038 /* IN1R_MIXOUTL_VOL - [5:3] */
+#define WM8993_IN1R_MIXOUTL_VOL_SHIFT 3 /* IN1R_MIXOUTL_VOL - [5:3] */
+#define WM8993_IN1R_MIXOUTL_VOL_WIDTH 3 /* IN1R_MIXOUTL_VOL - [5:3] */
+#define WM8993_IN1L_MIXOUTL_VOL_MASK 0x0007 /* IN1L_MIXOUTL_VOL - [2:0] */
+#define WM8993_IN1L_MIXOUTL_VOL_SHIFT 0 /* IN1L_MIXOUTL_VOL - [2:0] */
+#define WM8993_IN1L_MIXOUTL_VOL_WIDTH 3 /* IN1L_MIXOUTL_VOL - [2:0] */
+
+/*
+ * R48 (0x30) - Output Mixer4
+ */
+#define WM8993_IN2RP_MIXOUTR_VOL_MASK 0x0E00 /* IN2RP_MIXOUTR_VOL - [11:9] */
+#define WM8993_IN2RP_MIXOUTR_VOL_SHIFT 9 /* IN2RP_MIXOUTR_VOL - [11:9] */
+#define WM8993_IN2RP_MIXOUTR_VOL_WIDTH 3 /* IN2RP_MIXOUTR_VOL - [11:9] */
+#define WM8993_IN2RN_MIXOUTR_VOL_MASK 0x01C0 /* IN2RN_MIXOUTR_VOL - [8:6] */
+#define WM8993_IN2RN_MIXOUTR_VOL_SHIFT 6 /* IN2RN_MIXOUTR_VOL - [8:6] */
+#define WM8993_IN2RN_MIXOUTR_VOL_WIDTH 3 /* IN2RN_MIXOUTR_VOL - [8:6] */
+#define WM8993_IN1L_MIXOUTR_VOL_MASK 0x0038 /* IN1L_MIXOUTR_VOL - [5:3] */
+#define WM8993_IN1L_MIXOUTR_VOL_SHIFT 3 /* IN1L_MIXOUTR_VOL - [5:3] */
+#define WM8993_IN1L_MIXOUTR_VOL_WIDTH 3 /* IN1L_MIXOUTR_VOL - [5:3] */
+#define WM8993_IN1R_MIXOUTR_VOL_MASK 0x0007 /* IN1R_MIXOUTR_VOL - [2:0] */
+#define WM8993_IN1R_MIXOUTR_VOL_SHIFT 0 /* IN1R_MIXOUTR_VOL - [2:0] */
+#define WM8993_IN1R_MIXOUTR_VOL_WIDTH 3 /* IN1R_MIXOUTR_VOL - [2:0] */
+
+/*
+ * R49 (0x31) - Output Mixer5
+ */
+#define WM8993_DACL_MIXOUTL_VOL_MASK 0x0E00 /* DACL_MIXOUTL_VOL - [11:9] */
+#define WM8993_DACL_MIXOUTL_VOL_SHIFT 9 /* DACL_MIXOUTL_VOL - [11:9] */
+#define WM8993_DACL_MIXOUTL_VOL_WIDTH 3 /* DACL_MIXOUTL_VOL - [11:9] */
+#define WM8993_IN2RN_MIXOUTL_VOL_MASK 0x01C0 /* IN2RN_MIXOUTL_VOL - [8:6] */
+#define WM8993_IN2RN_MIXOUTL_VOL_SHIFT 6 /* IN2RN_MIXOUTL_VOL - [8:6] */
+#define WM8993_IN2RN_MIXOUTL_VOL_WIDTH 3 /* IN2RN_MIXOUTL_VOL - [8:6] */
+#define WM8993_MIXINR_MIXOUTL_VOL_MASK 0x0038 /* MIXINR_MIXOUTL_VOL - [5:3] */
+#define WM8993_MIXINR_MIXOUTL_VOL_SHIFT 3 /* MIXINR_MIXOUTL_VOL - [5:3] */
+#define WM8993_MIXINR_MIXOUTL_VOL_WIDTH 3 /* MIXINR_MIXOUTL_VOL - [5:3] */
+#define WM8993_MIXINL_MIXOUTL_VOL_MASK 0x0007 /* MIXINL_MIXOUTL_VOL - [2:0] */
+#define WM8993_MIXINL_MIXOUTL_VOL_SHIFT 0 /* MIXINL_MIXOUTL_VOL - [2:0] */
+#define WM8993_MIXINL_MIXOUTL_VOL_WIDTH 3 /* MIXINL_MIXOUTL_VOL - [2:0] */
+
+/*
+ * R50 (0x32) - Output Mixer6
+ */
+#define WM8993_DACR_MIXOUTR_VOL_MASK 0x0E00 /* DACR_MIXOUTR_VOL - [11:9] */
+#define WM8993_DACR_MIXOUTR_VOL_SHIFT 9 /* DACR_MIXOUTR_VOL - [11:9] */
+#define WM8993_DACR_MIXOUTR_VOL_WIDTH 3 /* DACR_MIXOUTR_VOL - [11:9] */
+#define WM8993_IN2LN_MIXOUTR_VOL_MASK 0x01C0 /* IN2LN_MIXOUTR_VOL - [8:6] */
+#define WM8993_IN2LN_MIXOUTR_VOL_SHIFT 6 /* IN2LN_MIXOUTR_VOL - [8:6] */
+#define WM8993_IN2LN_MIXOUTR_VOL_WIDTH 3 /* IN2LN_MIXOUTR_VOL - [8:6] */
+#define WM8993_MIXINL_MIXOUTR_VOL_MASK 0x0038 /* MIXINL_MIXOUTR_VOL - [5:3] */
+#define WM8993_MIXINL_MIXOUTR_VOL_SHIFT 3 /* MIXINL_MIXOUTR_VOL - [5:3] */
+#define WM8993_MIXINL_MIXOUTR_VOL_WIDTH 3 /* MIXINL_MIXOUTR_VOL - [5:3] */
+#define WM8993_MIXINR_MIXOUTR_VOL_MASK 0x0007 /* MIXINR_MIXOUTR_VOL - [2:0] */
+#define WM8993_MIXINR_MIXOUTR_VOL_SHIFT 0 /* MIXINR_MIXOUTR_VOL - [2:0] */
+#define WM8993_MIXINR_MIXOUTR_VOL_WIDTH 3 /* MIXINR_MIXOUTR_VOL - [2:0] */
+
+/*
+ * R51 (0x33) - HPOUT2 Mixer
+ */
+#define WM8993_VRX_TO_HPOUT2 0x0020 /* VRX_TO_HPOUT2 */
+#define WM8993_VRX_TO_HPOUT2_MASK 0x0020 /* VRX_TO_HPOUT2 */
+#define WM8993_VRX_TO_HPOUT2_SHIFT 5 /* VRX_TO_HPOUT2 */
+#define WM8993_VRX_TO_HPOUT2_WIDTH 1 /* VRX_TO_HPOUT2 */
+#define WM8993_MIXOUTLVOL_TO_HPOUT2 0x0010 /* MIXOUTLVOL_TO_HPOUT2 */
+#define WM8993_MIXOUTLVOL_TO_HPOUT2_MASK 0x0010 /* MIXOUTLVOL_TO_HPOUT2 */
+#define WM8993_MIXOUTLVOL_TO_HPOUT2_SHIFT 4 /* MIXOUTLVOL_TO_HPOUT2 */
+#define WM8993_MIXOUTLVOL_TO_HPOUT2_WIDTH 1 /* MIXOUTLVOL_TO_HPOUT2 */
+#define WM8993_MIXOUTRVOL_TO_HPOUT2 0x0008 /* MIXOUTRVOL_TO_HPOUT2 */
+#define WM8993_MIXOUTRVOL_TO_HPOUT2_MASK 0x0008 /* MIXOUTRVOL_TO_HPOUT2 */
+#define WM8993_MIXOUTRVOL_TO_HPOUT2_SHIFT 3 /* MIXOUTRVOL_TO_HPOUT2 */
+#define WM8993_MIXOUTRVOL_TO_HPOUT2_WIDTH 1 /* MIXOUTRVOL_TO_HPOUT2 */
+
+/*
+ * R52 (0x34) - Line Mixer1
+ */
+#define WM8993_MIXOUTL_TO_LINEOUT1N 0x0040 /* MIXOUTL_TO_LINEOUT1N */
+#define WM8993_MIXOUTL_TO_LINEOUT1N_MASK 0x0040 /* MIXOUTL_TO_LINEOUT1N */
+#define WM8993_MIXOUTL_TO_LINEOUT1N_SHIFT 6 /* MIXOUTL_TO_LINEOUT1N */
+#define WM8993_MIXOUTL_TO_LINEOUT1N_WIDTH 1 /* MIXOUTL_TO_LINEOUT1N */
+#define WM8993_MIXOUTR_TO_LINEOUT1N 0x0020 /* MIXOUTR_TO_LINEOUT1N */
+#define WM8993_MIXOUTR_TO_LINEOUT1N_MASK 0x0020 /* MIXOUTR_TO_LINEOUT1N */
+#define WM8993_MIXOUTR_TO_LINEOUT1N_SHIFT 5 /* MIXOUTR_TO_LINEOUT1N */
+#define WM8993_MIXOUTR_TO_LINEOUT1N_WIDTH 1 /* MIXOUTR_TO_LINEOUT1N */
+#define WM8993_LINEOUT1_MODE 0x0010 /* LINEOUT1_MODE */
+#define WM8993_LINEOUT1_MODE_MASK 0x0010 /* LINEOUT1_MODE */
+#define WM8993_LINEOUT1_MODE_SHIFT 4 /* LINEOUT1_MODE */
+#define WM8993_LINEOUT1_MODE_WIDTH 1 /* LINEOUT1_MODE */
+#define WM8993_IN1R_TO_LINEOUT1P 0x0004 /* IN1R_TO_LINEOUT1P */
+#define WM8993_IN1R_TO_LINEOUT1P_MASK 0x0004 /* IN1R_TO_LINEOUT1P */
+#define WM8993_IN1R_TO_LINEOUT1P_SHIFT 2 /* IN1R_TO_LINEOUT1P */
+#define WM8993_IN1R_TO_LINEOUT1P_WIDTH 1 /* IN1R_TO_LINEOUT1P */
+#define WM8993_IN1L_TO_LINEOUT1P 0x0002 /* IN1L_TO_LINEOUT1P */
+#define WM8993_IN1L_TO_LINEOUT1P_MASK 0x0002 /* IN1L_TO_LINEOUT1P */
+#define WM8993_IN1L_TO_LINEOUT1P_SHIFT 1 /* IN1L_TO_LINEOUT1P */
+#define WM8993_IN1L_TO_LINEOUT1P_WIDTH 1 /* IN1L_TO_LINEOUT1P */
+#define WM8993_MIXOUTL_TO_LINEOUT1P 0x0001 /* MIXOUTL_TO_LINEOUT1P */
+#define WM8993_MIXOUTL_TO_LINEOUT1P_MASK 0x0001 /* MIXOUTL_TO_LINEOUT1P */
+#define WM8993_MIXOUTL_TO_LINEOUT1P_SHIFT 0 /* MIXOUTL_TO_LINEOUT1P */
+#define WM8993_MIXOUTL_TO_LINEOUT1P_WIDTH 1 /* MIXOUTL_TO_LINEOUT1P */
+
+/*
+ * R53 (0x35) - Line Mixer2
+ */
+#define WM8993_MIXOUTR_TO_LINEOUT2N 0x0040 /* MIXOUTR_TO_LINEOUT2N */
+#define WM8993_MIXOUTR_TO_LINEOUT2N_MASK 0x0040 /* MIXOUTR_TO_LINEOUT2N */
+#define WM8993_MIXOUTR_TO_LINEOUT2N_SHIFT 6 /* MIXOUTR_TO_LINEOUT2N */
+#define WM8993_MIXOUTR_TO_LINEOUT2N_WIDTH 1 /* MIXOUTR_TO_LINEOUT2N */
+#define WM8993_MIXOUTL_TO_LINEOUT2N 0x0020 /* MIXOUTL_TO_LINEOUT2N */
+#define WM8993_MIXOUTL_TO_LINEOUT2N_MASK 0x0020 /* MIXOUTL_TO_LINEOUT2N */
+#define WM8993_MIXOUTL_TO_LINEOUT2N_SHIFT 5 /* MIXOUTL_TO_LINEOUT2N */
+#define WM8993_MIXOUTL_TO_LINEOUT2N_WIDTH 1 /* MIXOUTL_TO_LINEOUT2N */
+#define WM8993_LINEOUT2_MODE 0x0010 /* LINEOUT2_MODE */
+#define WM8993_LINEOUT2_MODE_MASK 0x0010 /* LINEOUT2_MODE */
+#define WM8993_LINEOUT2_MODE_SHIFT 4 /* LINEOUT2_MODE */
+#define WM8993_LINEOUT2_MODE_WIDTH 1 /* LINEOUT2_MODE */
+#define WM8993_IN1L_TO_LINEOUT2P 0x0004 /* IN1L_TO_LINEOUT2P */
+#define WM8993_IN1L_TO_LINEOUT2P_MASK 0x0004 /* IN1L_TO_LINEOUT2P */
+#define WM8993_IN1L_TO_LINEOUT2P_SHIFT 2 /* IN1L_TO_LINEOUT2P */
+#define WM8993_IN1L_TO_LINEOUT2P_WIDTH 1 /* IN1L_TO_LINEOUT2P */
+#define WM8993_IN1R_TO_LINEOUT2P 0x0002 /* IN1R_TO_LINEOUT2P */
+#define WM8993_IN1R_TO_LINEOUT2P_MASK 0x0002 /* IN1R_TO_LINEOUT2P */
+#define WM8993_IN1R_TO_LINEOUT2P_SHIFT 1 /* IN1R_TO_LINEOUT2P */
+#define WM8993_IN1R_TO_LINEOUT2P_WIDTH 1 /* IN1R_TO_LINEOUT2P */
+#define WM8993_MIXOUTR_TO_LINEOUT2P 0x0001 /* MIXOUTR_TO_LINEOUT2P */
+#define WM8993_MIXOUTR_TO_LINEOUT2P_MASK 0x0001 /* MIXOUTR_TO_LINEOUT2P */
+#define WM8993_MIXOUTR_TO_LINEOUT2P_SHIFT 0 /* MIXOUTR_TO_LINEOUT2P */
+#define WM8993_MIXOUTR_TO_LINEOUT2P_WIDTH 1 /* MIXOUTR_TO_LINEOUT2P */
+
+/*
+ * R54 (0x36) - Speaker Mixer
+ */
+#define WM8993_SPKAB_REF_SEL 0x0100 /* SPKAB_REF_SEL */
+#define WM8993_SPKAB_REF_SEL_MASK 0x0100 /* SPKAB_REF_SEL */
+#define WM8993_SPKAB_REF_SEL_SHIFT 8 /* SPKAB_REF_SEL */
+#define WM8993_SPKAB_REF_SEL_WIDTH 1 /* SPKAB_REF_SEL */
+#define WM8993_MIXINL_TO_SPKMIXL 0x0080 /* MIXINL_TO_SPKMIXL */
+#define WM8993_MIXINL_TO_SPKMIXL_MASK 0x0080 /* MIXINL_TO_SPKMIXL */
+#define WM8993_MIXINL_TO_SPKMIXL_SHIFT 7 /* MIXINL_TO_SPKMIXL */
+#define WM8993_MIXINL_TO_SPKMIXL_WIDTH 1 /* MIXINL_TO_SPKMIXL */
+#define WM8993_MIXINR_TO_SPKMIXR 0x0040 /* MIXINR_TO_SPKMIXR */
+#define WM8993_MIXINR_TO_SPKMIXR_MASK 0x0040 /* MIXINR_TO_SPKMIXR */
+#define WM8993_MIXINR_TO_SPKMIXR_SHIFT 6 /* MIXINR_TO_SPKMIXR */
+#define WM8993_MIXINR_TO_SPKMIXR_WIDTH 1 /* MIXINR_TO_SPKMIXR */
+#define WM8993_IN1LP_TO_SPKMIXL 0x0020 /* IN1LP_TO_SPKMIXL */
+#define WM8993_IN1LP_TO_SPKMIXL_MASK 0x0020 /* IN1LP_TO_SPKMIXL */
+#define WM8993_IN1LP_TO_SPKMIXL_SHIFT 5 /* IN1LP_TO_SPKMIXL */
+#define WM8993_IN1LP_TO_SPKMIXL_WIDTH 1 /* IN1LP_TO_SPKMIXL */
+#define WM8993_IN1RP_TO_SPKMIXR 0x0010 /* IN1RP_TO_SPKMIXR */
+#define WM8993_IN1RP_TO_SPKMIXR_MASK 0x0010 /* IN1RP_TO_SPKMIXR */
+#define WM8993_IN1RP_TO_SPKMIXR_SHIFT 4 /* IN1RP_TO_SPKMIXR */
+#define WM8993_IN1RP_TO_SPKMIXR_WIDTH 1 /* IN1RP_TO_SPKMIXR */
+#define WM8993_MIXOUTL_TO_SPKMIXL 0x0008 /* MIXOUTL_TO_SPKMIXL */
+#define WM8993_MIXOUTL_TO_SPKMIXL_MASK 0x0008 /* MIXOUTL_TO_SPKMIXL */
+#define WM8993_MIXOUTL_TO_SPKMIXL_SHIFT 3 /* MIXOUTL_TO_SPKMIXL */
+#define WM8993_MIXOUTL_TO_SPKMIXL_WIDTH 1 /* MIXOUTL_TO_SPKMIXL */
+#define WM8993_MIXOUTR_TO_SPKMIXR 0x0004 /* MIXOUTR_TO_SPKMIXR */
+#define WM8993_MIXOUTR_TO_SPKMIXR_MASK 0x0004 /* MIXOUTR_TO_SPKMIXR */
+#define WM8993_MIXOUTR_TO_SPKMIXR_SHIFT 2 /* MIXOUTR_TO_SPKMIXR */
+#define WM8993_MIXOUTR_TO_SPKMIXR_WIDTH 1 /* MIXOUTR_TO_SPKMIXR */
+#define WM8993_DACL_TO_SPKMIXL 0x0002 /* DACL_TO_SPKMIXL */
+#define WM8993_DACL_TO_SPKMIXL_MASK 0x0002 /* DACL_TO_SPKMIXL */
+#define WM8993_DACL_TO_SPKMIXL_SHIFT 1 /* DACL_TO_SPKMIXL */
+#define WM8993_DACL_TO_SPKMIXL_WIDTH 1 /* DACL_TO_SPKMIXL */
+#define WM8993_DACR_TO_SPKMIXR 0x0001 /* DACR_TO_SPKMIXR */
+#define WM8993_DACR_TO_SPKMIXR_MASK 0x0001 /* DACR_TO_SPKMIXR */
+#define WM8993_DACR_TO_SPKMIXR_SHIFT 0 /* DACR_TO_SPKMIXR */
+#define WM8993_DACR_TO_SPKMIXR_WIDTH 1 /* DACR_TO_SPKMIXR */
+
+/*
+ * R55 (0x37) - Additional Control
+ */
+#define WM8993_LINEOUT1_FB 0x0080 /* LINEOUT1_FB */
+#define WM8993_LINEOUT1_FB_MASK 0x0080 /* LINEOUT1_FB */
+#define WM8993_LINEOUT1_FB_SHIFT 7 /* LINEOUT1_FB */
+#define WM8993_LINEOUT1_FB_WIDTH 1 /* LINEOUT1_FB */
+#define WM8993_LINEOUT2_FB 0x0040 /* LINEOUT2_FB */
+#define WM8993_LINEOUT2_FB_MASK 0x0040 /* LINEOUT2_FB */
+#define WM8993_LINEOUT2_FB_SHIFT 6 /* LINEOUT2_FB */
+#define WM8993_LINEOUT2_FB_WIDTH 1 /* LINEOUT2_FB */
+#define WM8993_VROI 0x0001 /* VROI */
+#define WM8993_VROI_MASK 0x0001 /* VROI */
+#define WM8993_VROI_SHIFT 0 /* VROI */
+#define WM8993_VROI_WIDTH 1 /* VROI */
+
+/*
+ * R56 (0x38) - AntiPOP1
+ */
+#define WM8993_LINEOUT_VMID_BUF_ENA 0x0080 /* LINEOUT_VMID_BUF_ENA */
+#define WM8993_LINEOUT_VMID_BUF_ENA_MASK 0x0080 /* LINEOUT_VMID_BUF_ENA */
+#define WM8993_LINEOUT_VMID_BUF_ENA_SHIFT 7 /* LINEOUT_VMID_BUF_ENA */
+#define WM8993_LINEOUT_VMID_BUF_ENA_WIDTH 1 /* LINEOUT_VMID_BUF_ENA */
+#define WM8993_HPOUT2_IN_ENA 0x0040 /* HPOUT2_IN_ENA */
+#define WM8993_HPOUT2_IN_ENA_MASK 0x0040 /* HPOUT2_IN_ENA */
+#define WM8993_HPOUT2_IN_ENA_SHIFT 6 /* HPOUT2_IN_ENA */
+#define WM8993_HPOUT2_IN_ENA_WIDTH 1 /* HPOUT2_IN_ENA */
+#define WM8993_LINEOUT1_DISCH 0x0020 /* LINEOUT1_DISCH */
+#define WM8993_LINEOUT1_DISCH_MASK 0x0020 /* LINEOUT1_DISCH */
+#define WM8993_LINEOUT1_DISCH_SHIFT 5 /* LINEOUT1_DISCH */
+#define WM8993_LINEOUT1_DISCH_WIDTH 1 /* LINEOUT1_DISCH */
+#define WM8993_LINEOUT2_DISCH 0x0010 /* LINEOUT2_DISCH */
+#define WM8993_LINEOUT2_DISCH_MASK 0x0010 /* LINEOUT2_DISCH */
+#define WM8993_LINEOUT2_DISCH_SHIFT 4 /* LINEOUT2_DISCH */
+#define WM8993_LINEOUT2_DISCH_WIDTH 1 /* LINEOUT2_DISCH */
+
+/*
+ * R57 (0x39) - AntiPOP2
+ */
+#define WM8993_VMID_RAMP_MASK 0x0060 /* VMID_RAMP - [6:5] */
+#define WM8993_VMID_RAMP_SHIFT 5 /* VMID_RAMP - [6:5] */
+#define WM8993_VMID_RAMP_WIDTH 2 /* VMID_RAMP - [6:5] */
+#define WM8993_VMID_BUF_ENA 0x0008 /* VMID_BUF_ENA */
+#define WM8993_VMID_BUF_ENA_MASK 0x0008 /* VMID_BUF_ENA */
+#define WM8993_VMID_BUF_ENA_SHIFT 3 /* VMID_BUF_ENA */
+#define WM8993_VMID_BUF_ENA_WIDTH 1 /* VMID_BUF_ENA */
+#define WM8993_STARTUP_BIAS_ENA 0x0004 /* STARTUP_BIAS_ENA */
+#define WM8993_STARTUP_BIAS_ENA_MASK 0x0004 /* STARTUP_BIAS_ENA */
+#define WM8993_STARTUP_BIAS_ENA_SHIFT 2 /* STARTUP_BIAS_ENA */
+#define WM8993_STARTUP_BIAS_ENA_WIDTH 1 /* STARTUP_BIAS_ENA */
+#define WM8993_BIAS_SRC 0x0002 /* BIAS_SRC */
+#define WM8993_BIAS_SRC_MASK 0x0002 /* BIAS_SRC */
+#define WM8993_BIAS_SRC_SHIFT 1 /* BIAS_SRC */
+#define WM8993_BIAS_SRC_WIDTH 1 /* BIAS_SRC */
+#define WM8993_VMID_DISCH 0x0001 /* VMID_DISCH */
+#define WM8993_VMID_DISCH_MASK 0x0001 /* VMID_DISCH */
+#define WM8993_VMID_DISCH_SHIFT 0 /* VMID_DISCH */
+#define WM8993_VMID_DISCH_WIDTH 1 /* VMID_DISCH */
+
+/*
+ * R58 (0x3A) - MICBIAS
+ */
+#define WM8993_JD_SCTHR_MASK 0x00C0 /* JD_SCTHR - [7:6] */
+#define WM8993_JD_SCTHR_SHIFT 6 /* JD_SCTHR - [7:6] */
+#define WM8993_JD_SCTHR_WIDTH 2 /* JD_SCTHR - [7:6] */
+#define WM8993_JD_THR_MASK 0x0030 /* JD_THR - [5:4] */
+#define WM8993_JD_THR_SHIFT 4 /* JD_THR - [5:4] */
+#define WM8993_JD_THR_WIDTH 2 /* JD_THR - [5:4] */
+#define WM8993_JD_ENA 0x0004 /* JD_ENA */
+#define WM8993_JD_ENA_MASK 0x0004 /* JD_ENA */
+#define WM8993_JD_ENA_SHIFT 2 /* JD_ENA */
+#define WM8993_JD_ENA_WIDTH 1 /* JD_ENA */
+#define WM8993_MICB2_LVL 0x0002 /* MICB2_LVL */
+#define WM8993_MICB2_LVL_MASK 0x0002 /* MICB2_LVL */
+#define WM8993_MICB2_LVL_SHIFT 1 /* MICB2_LVL */
+#define WM8993_MICB2_LVL_WIDTH 1 /* MICB2_LVL */
+#define WM8993_MICB1_LVL 0x0001 /* MICB1_LVL */
+#define WM8993_MICB1_LVL_MASK 0x0001 /* MICB1_LVL */
+#define WM8993_MICB1_LVL_SHIFT 0 /* MICB1_LVL */
+#define WM8993_MICB1_LVL_WIDTH 1 /* MICB1_LVL */
+
+/*
+ * R60 (0x3C) - FLL Control 1
+ */
+#define WM8993_FLL_FRAC 0x0004 /* FLL_FRAC */
+#define WM8993_FLL_FRAC_MASK 0x0004 /* FLL_FRAC */
+#define WM8993_FLL_FRAC_SHIFT 2 /* FLL_FRAC */
+#define WM8993_FLL_FRAC_WIDTH 1 /* FLL_FRAC */
+#define WM8993_FLL_OSC_ENA 0x0002 /* FLL_OSC_ENA */
+#define WM8993_FLL_OSC_ENA_MASK 0x0002 /* FLL_OSC_ENA */
+#define WM8993_FLL_OSC_ENA_SHIFT 1 /* FLL_OSC_ENA */
+#define WM8993_FLL_OSC_ENA_WIDTH 1 /* FLL_OSC_ENA */
+#define WM8993_FLL_ENA 0x0001 /* FLL_ENA */
+#define WM8993_FLL_ENA_MASK 0x0001 /* FLL_ENA */
+#define WM8993_FLL_ENA_SHIFT 0 /* FLL_ENA */
+#define WM8993_FLL_ENA_WIDTH 1 /* FLL_ENA */
+
+/*
+ * R61 (0x3D) - FLL Control 2
+ */
+#define WM8993_FLL_OUTDIV_MASK 0x0700 /* FLL_OUTDIV - [10:8] */
+#define WM8993_FLL_OUTDIV_SHIFT 8 /* FLL_OUTDIV - [10:8] */
+#define WM8993_FLL_OUTDIV_WIDTH 3 /* FLL_OUTDIV - [10:8] */
+#define WM8993_FLL_CTRL_RATE_MASK 0x0070 /* FLL_CTRL_RATE - [6:4] */
+#define WM8993_FLL_CTRL_RATE_SHIFT 4 /* FLL_CTRL_RATE - [6:4] */
+#define WM8993_FLL_CTRL_RATE_WIDTH 3 /* FLL_CTRL_RATE - [6:4] */
+#define WM8993_FLL_FRATIO_MASK 0x0007 /* FLL_FRATIO - [2:0] */
+#define WM8993_FLL_FRATIO_SHIFT 0 /* FLL_FRATIO - [2:0] */
+#define WM8993_FLL_FRATIO_WIDTH 3 /* FLL_FRATIO - [2:0] */
+
+/*
+ * R62 (0x3E) - FLL Control 3
+ */
+#define WM8993_FLL_K_MASK 0xFFFF /* FLL_K - [15:0] */
+#define WM8993_FLL_K_SHIFT 0 /* FLL_K - [15:0] */
+#define WM8993_FLL_K_WIDTH 16 /* FLL_K - [15:0] */
+
+/*
+ * R63 (0x3F) - FLL Control 4
+ */
+#define WM8993_FLL_N_MASK 0x7FE0 /* FLL_N - [14:5] */
+#define WM8993_FLL_N_SHIFT 5 /* FLL_N - [14:5] */
+#define WM8993_FLL_N_WIDTH 10 /* FLL_N - [14:5] */
+#define WM8993_FLL_GAIN_MASK 0x000F /* FLL_GAIN - [3:0] */
+#define WM8993_FLL_GAIN_SHIFT 0 /* FLL_GAIN - [3:0] */
+#define WM8993_FLL_GAIN_WIDTH 4 /* FLL_GAIN - [3:0] */
+
+/*
+ * R64 (0x40) - FLL Control 5
+ */
+#define WM8993_FLL_FRC_NCO_VAL_MASK 0x1F80 /* FLL_FRC_NCO_VAL - [12:7] */
+#define WM8993_FLL_FRC_NCO_VAL_SHIFT 7 /* FLL_FRC_NCO_VAL - [12:7] */
+#define WM8993_FLL_FRC_NCO_VAL_WIDTH 6 /* FLL_FRC_NCO_VAL - [12:7] */
+#define WM8993_FLL_FRC_NCO 0x0040 /* FLL_FRC_NCO */
+#define WM8993_FLL_FRC_NCO_MASK 0x0040 /* FLL_FRC_NCO */
+#define WM8993_FLL_FRC_NCO_SHIFT 6 /* FLL_FRC_NCO */
+#define WM8993_FLL_FRC_NCO_WIDTH 1 /* FLL_FRC_NCO */
+#define WM8993_FLL_CLK_REF_DIV_MASK 0x0018 /* FLL_CLK_REF_DIV - [4:3] */
+#define WM8993_FLL_CLK_REF_DIV_SHIFT 3 /* FLL_CLK_REF_DIV - [4:3] */
+#define WM8993_FLL_CLK_REF_DIV_WIDTH 2 /* FLL_CLK_REF_DIV - [4:3] */
+#define WM8993_FLL_CLK_SRC_MASK 0x0003 /* FLL_CLK_SRC - [1:0] */
+#define WM8993_FLL_CLK_SRC_SHIFT 0 /* FLL_CLK_SRC - [1:0] */
+#define WM8993_FLL_CLK_SRC_WIDTH 2 /* FLL_CLK_SRC - [1:0] */
+
+/*
+ * R65 (0x41) - Clocking 3
+ */
+#define WM8993_CLK_DCS_DIV_MASK 0x3C00 /* CLK_DCS_DIV - [13:10] */
+#define WM8993_CLK_DCS_DIV_SHIFT 10 /* CLK_DCS_DIV - [13:10] */
+#define WM8993_CLK_DCS_DIV_WIDTH 4 /* CLK_DCS_DIV - [13:10] */
+#define WM8993_SAMPLE_RATE_MASK 0x0380 /* SAMPLE_RATE - [9:7] */
+#define WM8993_SAMPLE_RATE_SHIFT 7 /* SAMPLE_RATE - [9:7] */
+#define WM8993_SAMPLE_RATE_WIDTH 3 /* SAMPLE_RATE - [9:7] */
+#define WM8993_CLK_SYS_RATE_MASK 0x001E /* CLK_SYS_RATE - [4:1] */
+#define WM8993_CLK_SYS_RATE_SHIFT 1 /* CLK_SYS_RATE - [4:1] */
+#define WM8993_CLK_SYS_RATE_WIDTH 4 /* CLK_SYS_RATE - [4:1] */
+#define WM8993_CLK_DSP_ENA 0x0001 /* CLK_DSP_ENA */
+#define WM8993_CLK_DSP_ENA_MASK 0x0001 /* CLK_DSP_ENA */
+#define WM8993_CLK_DSP_ENA_SHIFT 0 /* CLK_DSP_ENA */
+#define WM8993_CLK_DSP_ENA_WIDTH 1 /* CLK_DSP_ENA */
+
+/*
+ * R66 (0x42) - Clocking 4
+ */
+#define WM8993_DAC_DIV4 0x0200 /* DAC_DIV4 */
+#define WM8993_DAC_DIV4_MASK 0x0200 /* DAC_DIV4 */
+#define WM8993_DAC_DIV4_SHIFT 9 /* DAC_DIV4 */
+#define WM8993_DAC_DIV4_WIDTH 1 /* DAC_DIV4 */
+#define WM8993_CLK_256K_DIV_MASK 0x007E /* CLK_256K_DIV - [6:1] */
+#define WM8993_CLK_256K_DIV_SHIFT 1 /* CLK_256K_DIV - [6:1] */
+#define WM8993_CLK_256K_DIV_WIDTH 6 /* CLK_256K_DIV - [6:1] */
+#define WM8993_SR_MODE 0x0001 /* SR_MODE */
+#define WM8993_SR_MODE_MASK 0x0001 /* SR_MODE */
+#define WM8993_SR_MODE_SHIFT 0 /* SR_MODE */
+#define WM8993_SR_MODE_WIDTH 1 /* SR_MODE */
+
+/*
+ * R67 (0x43) - MW Slave Control
+ */
+#define WM8993_MASK_WRITE_ENA 0x0001 /* MASK_WRITE_ENA */
+#define WM8993_MASK_WRITE_ENA_MASK 0x0001 /* MASK_WRITE_ENA */
+#define WM8993_MASK_WRITE_ENA_SHIFT 0 /* MASK_WRITE_ENA */
+#define WM8993_MASK_WRITE_ENA_WIDTH 1 /* MASK_WRITE_ENA */
+
+/*
+ * R69 (0x45) - Bus Control 1
+ */
+#define WM8993_CLK_SYS_ENA 0x0002 /* CLK_SYS_ENA */
+#define WM8993_CLK_SYS_ENA_MASK 0x0002 /* CLK_SYS_ENA */
+#define WM8993_CLK_SYS_ENA_SHIFT 1 /* CLK_SYS_ENA */
+#define WM8993_CLK_SYS_ENA_WIDTH 1 /* CLK_SYS_ENA */
+
+/*
+ * R70 (0x46) - Write Sequencer 0
+ */
+#define WM8993_WSEQ_ENA 0x0100 /* WSEQ_ENA */
+#define WM8993_WSEQ_ENA_MASK 0x0100 /* WSEQ_ENA */
+#define WM8993_WSEQ_ENA_SHIFT 8 /* WSEQ_ENA */
+#define WM8993_WSEQ_ENA_WIDTH 1 /* WSEQ_ENA */
+#define WM8993_WSEQ_WRITE_INDEX_MASK 0x001F /* WSEQ_WRITE_INDEX - [4:0] */
+#define WM8993_WSEQ_WRITE_INDEX_SHIFT 0 /* WSEQ_WRITE_INDEX - [4:0] */
+#define WM8993_WSEQ_WRITE_INDEX_WIDTH 5 /* WSEQ_WRITE_INDEX - [4:0] */
+
+/*
+ * R71 (0x47) - Write Sequencer 1
+ */
+#define WM8993_WSEQ_DATA_WIDTH_MASK 0x7000 /* WSEQ_DATA_WIDTH - [14:12] */
+#define WM8993_WSEQ_DATA_WIDTH_SHIFT 12 /* WSEQ_DATA_WIDTH - [14:12] */
+#define WM8993_WSEQ_DATA_WIDTH_WIDTH 3 /* WSEQ_DATA_WIDTH - [14:12] */
+#define WM8993_WSEQ_DATA_START_MASK 0x0F00 /* WSEQ_DATA_START - [11:8] */
+#define WM8993_WSEQ_DATA_START_SHIFT 8 /* WSEQ_DATA_START - [11:8] */
+#define WM8993_WSEQ_DATA_START_WIDTH 4 /* WSEQ_DATA_START - [11:8] */
+#define WM8993_WSEQ_ADDR_MASK 0x00FF /* WSEQ_ADDR - [7:0] */
+#define WM8993_WSEQ_ADDR_SHIFT 0 /* WSEQ_ADDR - [7:0] */
+#define WM8993_WSEQ_ADDR_WIDTH 8 /* WSEQ_ADDR - [7:0] */
+
+/*
+ * R72 (0x48) - Write Sequencer 2
+ */
+#define WM8993_WSEQ_EOS 0x4000 /* WSEQ_EOS */
+#define WM8993_WSEQ_EOS_MASK 0x4000 /* WSEQ_EOS */
+#define WM8993_WSEQ_EOS_SHIFT 14 /* WSEQ_EOS */
+#define WM8993_WSEQ_EOS_WIDTH 1 /* WSEQ_EOS */
+#define WM8993_WSEQ_DELAY_MASK 0x0F00 /* WSEQ_DELAY - [11:8] */
+#define WM8993_WSEQ_DELAY_SHIFT 8 /* WSEQ_DELAY - [11:8] */
+#define WM8993_WSEQ_DELAY_WIDTH 4 /* WSEQ_DELAY - [11:8] */
+#define WM8993_WSEQ_DATA_MASK 0x00FF /* WSEQ_DATA - [7:0] */
+#define WM8993_WSEQ_DATA_SHIFT 0 /* WSEQ_DATA - [7:0] */
+#define WM8993_WSEQ_DATA_WIDTH 8 /* WSEQ_DATA - [7:0] */
+
+/*
+ * R73 (0x49) - Write Sequencer 3
+ */
+#define WM8993_WSEQ_ABORT 0x0200 /* WSEQ_ABORT */
+#define WM8993_WSEQ_ABORT_MASK 0x0200 /* WSEQ_ABORT */
+#define WM8993_WSEQ_ABORT_SHIFT 9 /* WSEQ_ABORT */
+#define WM8993_WSEQ_ABORT_WIDTH 1 /* WSEQ_ABORT */
+#define WM8993_WSEQ_START 0x0100 /* WSEQ_START */
+#define WM8993_WSEQ_START_MASK 0x0100 /* WSEQ_START */
+#define WM8993_WSEQ_START_SHIFT 8 /* WSEQ_START */
+#define WM8993_WSEQ_START_WIDTH 1 /* WSEQ_START */
+#define WM8993_WSEQ_START_INDEX_MASK 0x003F /* WSEQ_START_INDEX - [5:0] */
+#define WM8993_WSEQ_START_INDEX_SHIFT 0 /* WSEQ_START_INDEX - [5:0] */
+#define WM8993_WSEQ_START_INDEX_WIDTH 6 /* WSEQ_START_INDEX - [5:0] */
+
+/*
+ * R74 (0x4A) - Write Sequencer 4
+ */
+#define WM8993_WSEQ_BUSY 0x0001 /* WSEQ_BUSY */
+#define WM8993_WSEQ_BUSY_MASK 0x0001 /* WSEQ_BUSY */
+#define WM8993_WSEQ_BUSY_SHIFT 0 /* WSEQ_BUSY */
+#define WM8993_WSEQ_BUSY_WIDTH 1 /* WSEQ_BUSY */
+
+/*
+ * R75 (0x4B) - Write Sequencer 5
+ */
+#define WM8993_WSEQ_CURRENT_INDEX_MASK 0x003F /* WSEQ_CURRENT_INDEX - [5:0] */
+#define WM8993_WSEQ_CURRENT_INDEX_SHIFT 0 /* WSEQ_CURRENT_INDEX - [5:0] */
+#define WM8993_WSEQ_CURRENT_INDEX_WIDTH 6 /* WSEQ_CURRENT_INDEX - [5:0] */
+
+/*
+ * R76 (0x4C) - Charge Pump 1
+ */
+#define WM8993_CP_ENA 0x8000 /* CP_ENA */
+#define WM8993_CP_ENA_MASK 0x8000 /* CP_ENA */
+#define WM8993_CP_ENA_SHIFT 15 /* CP_ENA */
+#define WM8993_CP_ENA_WIDTH 1 /* CP_ENA */
+
+/*
+ * R81 (0x51) - Class W 0
+ */
+#define WM8993_CP_DYN_FREQ 0x0002 /* CP_DYN_FREQ */
+#define WM8993_CP_DYN_FREQ_MASK 0x0002 /* CP_DYN_FREQ */
+#define WM8993_CP_DYN_FREQ_SHIFT 1 /* CP_DYN_FREQ */
+#define WM8993_CP_DYN_FREQ_WIDTH 1 /* CP_DYN_FREQ */
+#define WM8993_CP_DYN_V 0x0001 /* CP_DYN_V */
+#define WM8993_CP_DYN_V_MASK 0x0001 /* CP_DYN_V */
+#define WM8993_CP_DYN_V_SHIFT 0 /* CP_DYN_V */
+#define WM8993_CP_DYN_V_WIDTH 1 /* CP_DYN_V */
+
+/*
+ * R84 (0x54) - DC Servo 0
+ */
+#define WM8993_DCS_TRIG_SINGLE_1 0x2000 /* DCS_TRIG_SINGLE_1 */
+#define WM8993_DCS_TRIG_SINGLE_1_MASK 0x2000 /* DCS_TRIG_SINGLE_1 */
+#define WM8993_DCS_TRIG_SINGLE_1_SHIFT 13 /* DCS_TRIG_SINGLE_1 */
+#define WM8993_DCS_TRIG_SINGLE_1_WIDTH 1 /* DCS_TRIG_SINGLE_1 */
+#define WM8993_DCS_TRIG_SINGLE_0 0x1000 /* DCS_TRIG_SINGLE_0 */
+#define WM8993_DCS_TRIG_SINGLE_0_MASK 0x1000 /* DCS_TRIG_SINGLE_0 */
+#define WM8993_DCS_TRIG_SINGLE_0_SHIFT 12 /* DCS_TRIG_SINGLE_0 */
+#define WM8993_DCS_TRIG_SINGLE_0_WIDTH 1 /* DCS_TRIG_SINGLE_0 */
+#define WM8993_DCS_TRIG_SERIES_1 0x0200 /* DCS_TRIG_SERIES_1 */
+#define WM8993_DCS_TRIG_SERIES_1_MASK 0x0200 /* DCS_TRIG_SERIES_1 */
+#define WM8993_DCS_TRIG_SERIES_1_SHIFT 9 /* DCS_TRIG_SERIES_1 */
+#define WM8993_DCS_TRIG_SERIES_1_WIDTH 1 /* DCS_TRIG_SERIES_1 */
+#define WM8993_DCS_TRIG_SERIES_0 0x0100 /* DCS_TRIG_SERIES_0 */
+#define WM8993_DCS_TRIG_SERIES_0_MASK 0x0100 /* DCS_TRIG_SERIES_0 */
+#define WM8993_DCS_TRIG_SERIES_0_SHIFT 8 /* DCS_TRIG_SERIES_0 */
+#define WM8993_DCS_TRIG_SERIES_0_WIDTH 1 /* DCS_TRIG_SERIES_0 */
+#define WM8993_DCS_TRIG_STARTUP_1 0x0020 /* DCS_TRIG_STARTUP_1 */
+#define WM8993_DCS_TRIG_STARTUP_1_MASK 0x0020 /* DCS_TRIG_STARTUP_1 */
+#define WM8993_DCS_TRIG_STARTUP_1_SHIFT 5 /* DCS_TRIG_STARTUP_1 */
+#define WM8993_DCS_TRIG_STARTUP_1_WIDTH 1 /* DCS_TRIG_STARTUP_1 */
+#define WM8993_DCS_TRIG_STARTUP_0 0x0010 /* DCS_TRIG_STARTUP_0 */
+#define WM8993_DCS_TRIG_STARTUP_0_MASK 0x0010 /* DCS_TRIG_STARTUP_0 */
+#define WM8993_DCS_TRIG_STARTUP_0_SHIFT 4 /* DCS_TRIG_STARTUP_0 */
+#define WM8993_DCS_TRIG_STARTUP_0_WIDTH 1 /* DCS_TRIG_STARTUP_0 */
+#define WM8993_DCS_TRIG_DAC_WR_1 0x0008 /* DCS_TRIG_DAC_WR_1 */
+#define WM8993_DCS_TRIG_DAC_WR_1_MASK 0x0008 /* DCS_TRIG_DAC_WR_1 */
+#define WM8993_DCS_TRIG_DAC_WR_1_SHIFT 3 /* DCS_TRIG_DAC_WR_1 */
+#define WM8993_DCS_TRIG_DAC_WR_1_WIDTH 1 /* DCS_TRIG_DAC_WR_1 */
+#define WM8993_DCS_TRIG_DAC_WR_0 0x0004 /* DCS_TRIG_DAC_WR_0 */
+#define WM8993_DCS_TRIG_DAC_WR_0_MASK 0x0004 /* DCS_TRIG_DAC_WR_0 */
+#define WM8993_DCS_TRIG_DAC_WR_0_SHIFT 2 /* DCS_TRIG_DAC_WR_0 */
+#define WM8993_DCS_TRIG_DAC_WR_0_WIDTH 1 /* DCS_TRIG_DAC_WR_0 */
+#define WM8993_DCS_ENA_CHAN_1 0x0002 /* DCS_ENA_CHAN_1 */
+#define WM8993_DCS_ENA_CHAN_1_MASK 0x0002 /* DCS_ENA_CHAN_1 */
+#define WM8993_DCS_ENA_CHAN_1_SHIFT 1 /* DCS_ENA_CHAN_1 */
+#define WM8993_DCS_ENA_CHAN_1_WIDTH 1 /* DCS_ENA_CHAN_1 */
+#define WM8993_DCS_ENA_CHAN_0 0x0001 /* DCS_ENA_CHAN_0 */
+#define WM8993_DCS_ENA_CHAN_0_MASK 0x0001 /* DCS_ENA_CHAN_0 */
+#define WM8993_DCS_ENA_CHAN_0_SHIFT 0 /* DCS_ENA_CHAN_0 */
+#define WM8993_DCS_ENA_CHAN_0_WIDTH 1 /* DCS_ENA_CHAN_0 */
+
+/*
+ * R85 (0x55) - DC Servo 1
+ */
+#define WM8993_DCS_SERIES_NO_01_MASK 0x0FE0 /* DCS_SERIES_NO_01 - [11:5] */
+#define WM8993_DCS_SERIES_NO_01_SHIFT 5 /* DCS_SERIES_NO_01 - [11:5] */
+#define WM8993_DCS_SERIES_NO_01_WIDTH 7 /* DCS_SERIES_NO_01 - [11:5] */
+#define WM8993_DCS_TIMER_PERIOD_01_MASK 0x000F /* DCS_TIMER_PERIOD_01 - [3:0] */
+#define WM8993_DCS_TIMER_PERIOD_01_SHIFT 0 /* DCS_TIMER_PERIOD_01 - [3:0] */
+#define WM8993_DCS_TIMER_PERIOD_01_WIDTH 4 /* DCS_TIMER_PERIOD_01 - [3:0] */
+
+/*
+ * R87 (0x57) - DC Servo 3
+ */
+#define WM8993_DCS_DAC_WR_VAL_1_MASK 0xFF00 /* DCS_DAC_WR_VAL_1 - [15:8] */
+#define WM8993_DCS_DAC_WR_VAL_1_SHIFT 8 /* DCS_DAC_WR_VAL_1 - [15:8] */
+#define WM8993_DCS_DAC_WR_VAL_1_WIDTH 8 /* DCS_DAC_WR_VAL_1 - [15:8] */
+#define WM8993_DCS_DAC_WR_VAL_0_MASK 0x00FF /* DCS_DAC_WR_VAL_0 - [7:0] */
+#define WM8993_DCS_DAC_WR_VAL_0_SHIFT 0 /* DCS_DAC_WR_VAL_0 - [7:0] */
+#define WM8993_DCS_DAC_WR_VAL_0_WIDTH 8 /* DCS_DAC_WR_VAL_0 - [7:0] */
+
+/*
+ * R88 (0x58) - DC Servo Readback 0
+ */
+#define WM8993_DCS_DATAPATH_BUSY 0x4000 /* DCS_DATAPATH_BUSY */
+#define WM8993_DCS_DATAPATH_BUSY_MASK 0x4000 /* DCS_DATAPATH_BUSY */
+#define WM8993_DCS_DATAPATH_BUSY_SHIFT 14 /* DCS_DATAPATH_BUSY */
+#define WM8993_DCS_DATAPATH_BUSY_WIDTH 1 /* DCS_DATAPATH_BUSY */
+#define WM8993_DCS_CHANNEL_MASK 0x3000 /* DCS_CHANNEL - [13:12] */
+#define WM8993_DCS_CHANNEL_SHIFT 12 /* DCS_CHANNEL - [13:12] */
+#define WM8993_DCS_CHANNEL_WIDTH 2 /* DCS_CHANNEL - [13:12] */
+#define WM8993_DCS_CAL_COMPLETE_MASK 0x0300 /* DCS_CAL_COMPLETE - [9:8] */
+#define WM8993_DCS_CAL_COMPLETE_SHIFT 8 /* DCS_CAL_COMPLETE - [9:8] */
+#define WM8993_DCS_CAL_COMPLETE_WIDTH 2 /* DCS_CAL_COMPLETE - [9:8] */
+#define WM8993_DCS_DAC_WR_COMPLETE_MASK 0x0030 /* DCS_DAC_WR_COMPLETE - [5:4] */
+#define WM8993_DCS_DAC_WR_COMPLETE_SHIFT 4 /* DCS_DAC_WR_COMPLETE - [5:4] */
+#define WM8993_DCS_DAC_WR_COMPLETE_WIDTH 2 /* DCS_DAC_WR_COMPLETE - [5:4] */
+#define WM8993_DCS_STARTUP_COMPLETE_MASK 0x0003 /* DCS_STARTUP_COMPLETE - [1:0] */
+#define WM8993_DCS_STARTUP_COMPLETE_SHIFT 0 /* DCS_STARTUP_COMPLETE - [1:0] */
+#define WM8993_DCS_STARTUP_COMPLETE_WIDTH 2 /* DCS_STARTUP_COMPLETE - [1:0] */
+
+/*
+ * R89 (0x59) - DC Servo Readback 1
+ */
+#define WM8993_DCS_INTEG_CHAN_1_MASK 0x00FF /* DCS_INTEG_CHAN_1 - [7:0] */
+#define WM8993_DCS_INTEG_CHAN_1_SHIFT 0 /* DCS_INTEG_CHAN_1 - [7:0] */
+#define WM8993_DCS_INTEG_CHAN_1_WIDTH 8 /* DCS_INTEG_CHAN_1 - [7:0] */
+
+/*
+ * R90 (0x5A) - DC Servo Readback 2
+ */
+#define WM8993_DCS_INTEG_CHAN_0_MASK 0x00FF /* DCS_INTEG_CHAN_0 - [7:0] */
+#define WM8993_DCS_INTEG_CHAN_0_SHIFT 0 /* DCS_INTEG_CHAN_0 - [7:0] */
+#define WM8993_DCS_INTEG_CHAN_0_WIDTH 8 /* DCS_INTEG_CHAN_0 - [7:0] */
+
+/*
+ * R96 (0x60) - Analogue HP 0
+ */
+#define WM8993_HPOUT1_AUTO_PU 0x0100 /* HPOUT1_AUTO_PU */
+#define WM8993_HPOUT1_AUTO_PU_MASK 0x0100 /* HPOUT1_AUTO_PU */
+#define WM8993_HPOUT1_AUTO_PU_SHIFT 8 /* HPOUT1_AUTO_PU */
+#define WM8993_HPOUT1_AUTO_PU_WIDTH 1 /* HPOUT1_AUTO_PU */
+#define WM8993_HPOUT1L_RMV_SHORT 0x0080 /* HPOUT1L_RMV_SHORT */
+#define WM8993_HPOUT1L_RMV_SHORT_MASK 0x0080 /* HPOUT1L_RMV_SHORT */
+#define WM8993_HPOUT1L_RMV_SHORT_SHIFT 7 /* HPOUT1L_RMV_SHORT */
+#define WM8993_HPOUT1L_RMV_SHORT_WIDTH 1 /* HPOUT1L_RMV_SHORT */
+#define WM8993_HPOUT1L_OUTP 0x0040 /* HPOUT1L_OUTP */
+#define WM8993_HPOUT1L_OUTP_MASK 0x0040 /* HPOUT1L_OUTP */
+#define WM8993_HPOUT1L_OUTP_SHIFT 6 /* HPOUT1L_OUTP */
+#define WM8993_HPOUT1L_OUTP_WIDTH 1 /* HPOUT1L_OUTP */
+#define WM8993_HPOUT1L_DLY 0x0020 /* HPOUT1L_DLY */
+#define WM8993_HPOUT1L_DLY_MASK 0x0020 /* HPOUT1L_DLY */
+#define WM8993_HPOUT1L_DLY_SHIFT 5 /* HPOUT1L_DLY */
+#define WM8993_HPOUT1L_DLY_WIDTH 1 /* HPOUT1L_DLY */
+#define WM8993_HPOUT1R_RMV_SHORT 0x0008 /* HPOUT1R_RMV_SHORT */
+#define WM8993_HPOUT1R_RMV_SHORT_MASK 0x0008 /* HPOUT1R_RMV_SHORT */
+#define WM8993_HPOUT1R_RMV_SHORT_SHIFT 3 /* HPOUT1R_RMV_SHORT */
+#define WM8993_HPOUT1R_RMV_SHORT_WIDTH 1 /* HPOUT1R_RMV_SHORT */
+#define WM8993_HPOUT1R_OUTP 0x0004 /* HPOUT1R_OUTP */
+#define WM8993_HPOUT1R_OUTP_MASK 0x0004 /* HPOUT1R_OUTP */
+#define WM8993_HPOUT1R_OUTP_SHIFT 2 /* HPOUT1R_OUTP */
+#define WM8993_HPOUT1R_OUTP_WIDTH 1 /* HPOUT1R_OUTP */
+#define WM8993_HPOUT1R_DLY 0x0002 /* HPOUT1R_DLY */
+#define WM8993_HPOUT1R_DLY_MASK 0x0002 /* HPOUT1R_DLY */
+#define WM8993_HPOUT1R_DLY_SHIFT 1 /* HPOUT1R_DLY */
+#define WM8993_HPOUT1R_DLY_WIDTH 1 /* HPOUT1R_DLY */
+
+/*
+ * R98 (0x62) - EQ1
+ */
+#define WM8993_EQ_ENA 0x0001 /* EQ_ENA */
+#define WM8993_EQ_ENA_MASK 0x0001 /* EQ_ENA */
+#define WM8993_EQ_ENA_SHIFT 0 /* EQ_ENA */
+#define WM8993_EQ_ENA_WIDTH 1 /* EQ_ENA */
+
+/*
+ * R99 (0x63) - EQ2
+ */
+#define WM8993_EQ_B1_GAIN_MASK 0x001F /* EQ_B1_GAIN - [4:0] */
+#define WM8993_EQ_B1_GAIN_SHIFT 0 /* EQ_B1_GAIN - [4:0] */
+#define WM8993_EQ_B1_GAIN_WIDTH 5 /* EQ_B1_GAIN - [4:0] */
+
+/*
+ * R100 (0x64) - EQ3
+ */
+#define WM8993_EQ_B2_GAIN_MASK 0x001F /* EQ_B2_GAIN - [4:0] */
+#define WM8993_EQ_B2_GAIN_SHIFT 0 /* EQ_B2_GAIN - [4:0] */
+#define WM8993_EQ_B2_GAIN_WIDTH 5 /* EQ_B2_GAIN - [4:0] */
+
+/*
+ * R101 (0x65) - EQ4
+ */
+#define WM8993_EQ_B3_GAIN_MASK 0x001F /* EQ_B3_GAIN - [4:0] */
+#define WM8993_EQ_B3_GAIN_SHIFT 0 /* EQ_B3_GAIN - [4:0] */
+#define WM8993_EQ_B3_GAIN_WIDTH 5 /* EQ_B3_GAIN - [4:0] */
+
+/*
+ * R102 (0x66) - EQ5
+ */
+#define WM8993_EQ_B4_GAIN_MASK 0x001F /* EQ_B4_GAIN - [4:0] */
+#define WM8993_EQ_B4_GAIN_SHIFT 0 /* EQ_B4_GAIN - [4:0] */
+#define WM8993_EQ_B4_GAIN_WIDTH 5 /* EQ_B4_GAIN - [4:0] */
+
+/*
+ * R103 (0x67) - EQ6
+ */
+#define WM8993_EQ_B5_GAIN_MASK 0x001F /* EQ_B5_GAIN - [4:0] */
+#define WM8993_EQ_B5_GAIN_SHIFT 0 /* EQ_B5_GAIN - [4:0] */
+#define WM8993_EQ_B5_GAIN_WIDTH 5 /* EQ_B5_GAIN - [4:0] */
+
+/*
+ * R104 (0x68) - EQ7
+ */
+#define WM8993_EQ_B1_A_MASK 0xFFFF /* EQ_B1_A - [15:0] */
+#define WM8993_EQ_B1_A_SHIFT 0 /* EQ_B1_A - [15:0] */
+#define WM8993_EQ_B1_A_WIDTH 16 /* EQ_B1_A - [15:0] */
+
+/*
+ * R105 (0x69) - EQ8
+ */
+#define WM8993_EQ_B1_B_MASK 0xFFFF /* EQ_B1_B - [15:0] */
+#define WM8993_EQ_B1_B_SHIFT 0 /* EQ_B1_B - [15:0] */
+#define WM8993_EQ_B1_B_WIDTH 16 /* EQ_B1_B - [15:0] */
+
+/*
+ * R106 (0x6A) - EQ9
+ */
+#define WM8993_EQ_B1_PG_MASK 0xFFFF /* EQ_B1_PG - [15:0] */
+#define WM8993_EQ_B1_PG_SHIFT 0 /* EQ_B1_PG - [15:0] */
+#define WM8993_EQ_B1_PG_WIDTH 16 /* EQ_B1_PG - [15:0] */
+
+/*
+ * R107 (0x6B) - EQ10
+ */
+#define WM8993_EQ_B2_A_MASK 0xFFFF /* EQ_B2_A - [15:0] */
+#define WM8993_EQ_B2_A_SHIFT 0 /* EQ_B2_A - [15:0] */
+#define WM8993_EQ_B2_A_WIDTH 16 /* EQ_B2_A - [15:0] */
+
+/*
+ * R108 (0x6C) - EQ11
+ */
+#define WM8993_EQ_B2_B_MASK 0xFFFF /* EQ_B2_B - [15:0] */
+#define WM8993_EQ_B2_B_SHIFT 0 /* EQ_B2_B - [15:0] */
+#define WM8993_EQ_B2_B_WIDTH 16 /* EQ_B2_B - [15:0] */
+
+/*
+ * R109 (0x6D) - EQ12
+ */
+#define WM8993_EQ_B2_C_MASK 0xFFFF /* EQ_B2_C - [15:0] */
+#define WM8993_EQ_B2_C_SHIFT 0 /* EQ_B2_C - [15:0] */
+#define WM8993_EQ_B2_C_WIDTH 16 /* EQ_B2_C - [15:0] */
+
+/*
+ * R110 (0x6E) - EQ13
+ */
+#define WM8993_EQ_B2_PG_MASK 0xFFFF /* EQ_B2_PG - [15:0] */
+#define WM8993_EQ_B2_PG_SHIFT 0 /* EQ_B2_PG - [15:0] */
+#define WM8993_EQ_B2_PG_WIDTH 16 /* EQ_B2_PG - [15:0] */
+
+/*
+ * R111 (0x6F) - EQ14
+ */
+#define WM8993_EQ_B3_A_MASK 0xFFFF /* EQ_B3_A - [15:0] */
+#define WM8993_EQ_B3_A_SHIFT 0 /* EQ_B3_A - [15:0] */
+#define WM8993_EQ_B3_A_WIDTH 16 /* EQ_B3_A - [15:0] */
+
+/*
+ * R112 (0x70) - EQ15
+ */
+#define WM8993_EQ_B3_B_MASK 0xFFFF /* EQ_B3_B - [15:0] */
+#define WM8993_EQ_B3_B_SHIFT 0 /* EQ_B3_B - [15:0] */
+#define WM8993_EQ_B3_B_WIDTH 16 /* EQ_B3_B - [15:0] */
+
+/*
+ * R113 (0x71) - EQ16
+ */
+#define WM8993_EQ_B3_C_MASK 0xFFFF /* EQ_B3_C - [15:0] */
+#define WM8993_EQ_B3_C_SHIFT 0 /* EQ_B3_C - [15:0] */
+#define WM8993_EQ_B3_C_WIDTH 16 /* EQ_B3_C - [15:0] */
+
+/*
+ * R114 (0x72) - EQ17
+ */
+#define WM8993_EQ_B3_PG_MASK 0xFFFF /* EQ_B3_PG - [15:0] */
+#define WM8993_EQ_B3_PG_SHIFT 0 /* EQ_B3_PG - [15:0] */
+#define WM8993_EQ_B3_PG_WIDTH 16 /* EQ_B3_PG - [15:0] */
+
+/*
+ * R115 (0x73) - EQ18
+ */
+#define WM8993_EQ_B4_A_MASK 0xFFFF /* EQ_B4_A - [15:0] */
+#define WM8993_EQ_B4_A_SHIFT 0 /* EQ_B4_A - [15:0] */
+#define WM8993_EQ_B4_A_WIDTH 16 /* EQ_B4_A - [15:0] */
+
+/*
+ * R116 (0x74) - EQ19
+ */
+#define WM8993_EQ_B4_B_MASK 0xFFFF /* EQ_B4_B - [15:0] */
+#define WM8993_EQ_B4_B_SHIFT 0 /* EQ_B4_B - [15:0] */
+#define WM8993_EQ_B4_B_WIDTH 16 /* EQ_B4_B - [15:0] */
+
+/*
+ * R117 (0x75) - EQ20
+ */
+#define WM8993_EQ_B4_C_MASK 0xFFFF /* EQ_B4_C - [15:0] */
+#define WM8993_EQ_B4_C_SHIFT 0 /* EQ_B4_C - [15:0] */
+#define WM8993_EQ_B4_C_WIDTH 16 /* EQ_B4_C - [15:0] */
+
+/*
+ * R118 (0x76) - EQ21
+ */
+#define WM8993_EQ_B4_PG_MASK 0xFFFF /* EQ_B4_PG - [15:0] */
+#define WM8993_EQ_B4_PG_SHIFT 0 /* EQ_B4_PG - [15:0] */
+#define WM8993_EQ_B4_PG_WIDTH 16 /* EQ_B4_PG - [15:0] */
+
+/*
+ * R119 (0x77) - EQ22
+ */
+#define WM8993_EQ_B5_A_MASK 0xFFFF /* EQ_B5_A - [15:0] */
+#define WM8993_EQ_B5_A_SHIFT 0 /* EQ_B5_A - [15:0] */
+#define WM8993_EQ_B5_A_WIDTH 16 /* EQ_B5_A - [15:0] */
+
+/*
+ * R120 (0x78) - EQ23
+ */
+#define WM8993_EQ_B5_B_MASK 0xFFFF /* EQ_B5_B - [15:0] */
+#define WM8993_EQ_B5_B_SHIFT 0 /* EQ_B5_B - [15:0] */
+#define WM8993_EQ_B5_B_WIDTH 16 /* EQ_B5_B - [15:0] */
+
+/*
+ * R121 (0x79) - EQ24
+ */
+#define WM8993_EQ_B5_PG_MASK 0xFFFF /* EQ_B5_PG - [15:0] */
+#define WM8993_EQ_B5_PG_SHIFT 0 /* EQ_B5_PG - [15:0] */
+#define WM8993_EQ_B5_PG_WIDTH 16 /* EQ_B5_PG - [15:0] */
+
+/*
+ * R122 (0x7A) - Digital Pulls
+ */
+#define WM8993_MCLK_PU 0x0080 /* MCLK_PU */
+#define WM8993_MCLK_PU_MASK 0x0080 /* MCLK_PU */
+#define WM8993_MCLK_PU_SHIFT 7 /* MCLK_PU */
+#define WM8993_MCLK_PU_WIDTH 1 /* MCLK_PU */
+#define WM8993_MCLK_PD 0x0040 /* MCLK_PD */
+#define WM8993_MCLK_PD_MASK 0x0040 /* MCLK_PD */
+#define WM8993_MCLK_PD_SHIFT 6 /* MCLK_PD */
+#define WM8993_MCLK_PD_WIDTH 1 /* MCLK_PD */
+#define WM8993_DACDAT_PU 0x0020 /* DACDAT_PU */
+#define WM8993_DACDAT_PU_MASK 0x0020 /* DACDAT_PU */
+#define WM8993_DACDAT_PU_SHIFT 5 /* DACDAT_PU */
+#define WM8993_DACDAT_PU_WIDTH 1 /* DACDAT_PU */
+#define WM8993_DACDAT_PD 0x0010 /* DACDAT_PD */
+#define WM8993_DACDAT_PD_MASK 0x0010 /* DACDAT_PD */
+#define WM8993_DACDAT_PD_SHIFT 4 /* DACDAT_PD */
+#define WM8993_DACDAT_PD_WIDTH 1 /* DACDAT_PD */
+#define WM8993_LRCLK_PU 0x0008 /* LRCLK_PU */
+#define WM8993_LRCLK_PU_MASK 0x0008 /* LRCLK_PU */
+#define WM8993_LRCLK_PU_SHIFT 3 /* LRCLK_PU */
+#define WM8993_LRCLK_PU_WIDTH 1 /* LRCLK_PU */
+#define WM8993_LRCLK_PD 0x0004 /* LRCLK_PD */
+#define WM8993_LRCLK_PD_MASK 0x0004 /* LRCLK_PD */
+#define WM8993_LRCLK_PD_SHIFT 2 /* LRCLK_PD */
+#define WM8993_LRCLK_PD_WIDTH 1 /* LRCLK_PD */
+#define WM8993_BCLK_PU 0x0002 /* BCLK_PU */
+#define WM8993_BCLK_PU_MASK 0x0002 /* BCLK_PU */
+#define WM8993_BCLK_PU_SHIFT 1 /* BCLK_PU */
+#define WM8993_BCLK_PU_WIDTH 1 /* BCLK_PU */
+#define WM8993_BCLK_PD 0x0001 /* BCLK_PD */
+#define WM8993_BCLK_PD_MASK 0x0001 /* BCLK_PD */
+#define WM8993_BCLK_PD_SHIFT 0 /* BCLK_PD */
+#define WM8993_BCLK_PD_WIDTH 1 /* BCLK_PD */
+
+/*
+ * R123 (0x7B) - DRC Control 1
+ */
+#define WM8993_DRC_ENA 0x8000 /* DRC_ENA */
+#define WM8993_DRC_ENA_MASK 0x8000 /* DRC_ENA */
+#define WM8993_DRC_ENA_SHIFT 15 /* DRC_ENA */
+#define WM8993_DRC_ENA_WIDTH 1 /* DRC_ENA */
+#define WM8993_DRC_DAC_PATH 0x4000 /* DRC_DAC_PATH */
+#define WM8993_DRC_DAC_PATH_MASK 0x4000 /* DRC_DAC_PATH */
+#define WM8993_DRC_DAC_PATH_SHIFT 14 /* DRC_DAC_PATH */
+#define WM8993_DRC_DAC_PATH_WIDTH 1 /* DRC_DAC_PATH */
+#define WM8993_DRC_SMOOTH_ENA 0x0800 /* DRC_SMOOTH_ENA */
+#define WM8993_DRC_SMOOTH_ENA_MASK 0x0800 /* DRC_SMOOTH_ENA */
+#define WM8993_DRC_SMOOTH_ENA_SHIFT 11 /* DRC_SMOOTH_ENA */
+#define WM8993_DRC_SMOOTH_ENA_WIDTH 1 /* DRC_SMOOTH_ENA */
+#define WM8993_DRC_QR_ENA 0x0400 /* DRC_QR_ENA */
+#define WM8993_DRC_QR_ENA_MASK 0x0400 /* DRC_QR_ENA */
+#define WM8993_DRC_QR_ENA_SHIFT 10 /* DRC_QR_ENA */
+#define WM8993_DRC_QR_ENA_WIDTH 1 /* DRC_QR_ENA */
+#define WM8993_DRC_ANTICLIP_ENA 0x0200 /* DRC_ANTICLIP_ENA */
+#define WM8993_DRC_ANTICLIP_ENA_MASK 0x0200 /* DRC_ANTICLIP_ENA */
+#define WM8993_DRC_ANTICLIP_ENA_SHIFT 9 /* DRC_ANTICLIP_ENA */
+#define WM8993_DRC_ANTICLIP_ENA_WIDTH 1 /* DRC_ANTICLIP_ENA */
+#define WM8993_DRC_HYST_ENA 0x0100 /* DRC_HYST_ENA */
+#define WM8993_DRC_HYST_ENA_MASK 0x0100 /* DRC_HYST_ENA */
+#define WM8993_DRC_HYST_ENA_SHIFT 8 /* DRC_HYST_ENA */
+#define WM8993_DRC_HYST_ENA_WIDTH 1 /* DRC_HYST_ENA */
+#define WM8993_DRC_THRESH_HYST_MASK 0x0030 /* DRC_THRESH_HYST - [5:4] */
+#define WM8993_DRC_THRESH_HYST_SHIFT 4 /* DRC_THRESH_HYST - [5:4] */
+#define WM8993_DRC_THRESH_HYST_WIDTH 2 /* DRC_THRESH_HYST - [5:4] */
+#define WM8993_DRC_MINGAIN_MASK 0x000C /* DRC_MINGAIN - [3:2] */
+#define WM8993_DRC_MINGAIN_SHIFT 2 /* DRC_MINGAIN - [3:2] */
+#define WM8993_DRC_MINGAIN_WIDTH 2 /* DRC_MINGAIN - [3:2] */
+#define WM8993_DRC_MAXGAIN_MASK 0x0003 /* DRC_MAXGAIN - [1:0] */
+#define WM8993_DRC_MAXGAIN_SHIFT 0 /* DRC_MAXGAIN - [1:0] */
+#define WM8993_DRC_MAXGAIN_WIDTH 2 /* DRC_MAXGAIN - [1:0] */
+
+/*
+ * R124 (0x7C) - DRC Control 2
+ */
+#define WM8993_DRC_ATTACK_RATE_MASK 0xF000 /* DRC_ATTACK_RATE - [15:12] */
+#define WM8993_DRC_ATTACK_RATE_SHIFT 12 /* DRC_ATTACK_RATE - [15:12] */
+#define WM8993_DRC_ATTACK_RATE_WIDTH 4 /* DRC_ATTACK_RATE - [15:12] */
+#define WM8993_DRC_DECAY_RATE_MASK 0x0F00 /* DRC_DECAY_RATE - [11:8] */
+#define WM8993_DRC_DECAY_RATE_SHIFT 8 /* DRC_DECAY_RATE - [11:8] */
+#define WM8993_DRC_DECAY_RATE_WIDTH 4 /* DRC_DECAY_RATE - [11:8] */
+#define WM8993_DRC_THRESH_COMP_MASK 0x00FC /* DRC_THRESH_COMP - [7:2] */
+#define WM8993_DRC_THRESH_COMP_SHIFT 2 /* DRC_THRESH_COMP - [7:2] */
+#define WM8993_DRC_THRESH_COMP_WIDTH 6 /* DRC_THRESH_COMP - [7:2] */
+
+/*
+ * R125 (0x7D) - DRC Control 3
+ */
+#define WM8993_DRC_AMP_COMP_MASK 0xF800 /* DRC_AMP_COMP - [15:11] */
+#define WM8993_DRC_AMP_COMP_SHIFT 11 /* DRC_AMP_COMP - [15:11] */
+#define WM8993_DRC_AMP_COMP_WIDTH 5 /* DRC_AMP_COMP - [15:11] */
+#define WM8993_DRC_R0_SLOPE_COMP_MASK 0x0700 /* DRC_R0_SLOPE_COMP - [10:8] */
+#define WM8993_DRC_R0_SLOPE_COMP_SHIFT 8 /* DRC_R0_SLOPE_COMP - [10:8] */
+#define WM8993_DRC_R0_SLOPE_COMP_WIDTH 3 /* DRC_R0_SLOPE_COMP - [10:8] */
+#define WM8993_DRC_FF_DELAY 0x0080 /* DRC_FF_DELAY */
+#define WM8993_DRC_FF_DELAY_MASK 0x0080 /* DRC_FF_DELAY */
+#define WM8993_DRC_FF_DELAY_SHIFT 7 /* DRC_FF_DELAY */
+#define WM8993_DRC_FF_DELAY_WIDTH 1 /* DRC_FF_DELAY */
+#define WM8993_DRC_THRESH_QR_MASK 0x000C /* DRC_THRESH_QR - [3:2] */
+#define WM8993_DRC_THRESH_QR_SHIFT 2 /* DRC_THRESH_QR - [3:2] */
+#define WM8993_DRC_THRESH_QR_WIDTH 2 /* DRC_THRESH_QR - [3:2] */
+#define WM8993_DRC_RATE_QR_MASK 0x0003 /* DRC_RATE_QR - [1:0] */
+#define WM8993_DRC_RATE_QR_SHIFT 0 /* DRC_RATE_QR - [1:0] */
+#define WM8993_DRC_RATE_QR_WIDTH 2 /* DRC_RATE_QR - [1:0] */
+
+/*
+ * R126 (0x7E) - DRC Control 4
+ */
+#define WM8993_DRC_R1_SLOPE_COMP_MASK 0xE000 /* DRC_R1_SLOPE_COMP - [15:13] */
+#define WM8993_DRC_R1_SLOPE_COMP_SHIFT 13 /* DRC_R1_SLOPE_COMP - [15:13] */
+#define WM8993_DRC_R1_SLOPE_COMP_WIDTH 3 /* DRC_R1_SLOPE_COMP - [15:13] */
+#define WM8993_DRC_STARTUP_GAIN_MASK 0x1F00 /* DRC_STARTUP_GAIN - [12:8] */
+#define WM8993_DRC_STARTUP_GAIN_SHIFT 8 /* DRC_STARTUP_GAIN - [12:8] */
+#define WM8993_DRC_STARTUP_GAIN_WIDTH 5 /* DRC_STARTUP_GAIN - [12:8] */
+
+#endif
int master;
int fll_fref;
int fll_fout;
+ int tdm_width;
struct wm9081_retune_mobile_config *retune;
};
-static int wm9081_reg_is_volatile(int reg)
+static int wm9081_volatile_register(unsigned int reg)
{
switch (reg) {
+ case WM9081_SOFTWARE_RESET:
+ return 1;
default:
return 0;
}
}
-static unsigned int wm9081_read_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- u16 *cache = codec->reg_cache;
- BUG_ON(reg > WM9081_MAX_REGISTER);
- return cache[reg];
-}
-
-static unsigned int wm9081_read_hw(struct snd_soc_codec *codec, u8 reg)
-{
- struct i2c_msg xfer[2];
- u16 data;
- int ret;
- struct i2c_client *client = codec->control_data;
-
- BUG_ON(reg > WM9081_MAX_REGISTER);
-
- /* Write register */
- xfer[0].addr = client->addr;
- xfer[0].flags = 0;
- xfer[0].len = 1;
- xfer[0].buf = ®
-
- /* Read data */
- xfer[1].addr = client->addr;
- xfer[1].flags = I2C_M_RD;
- xfer[1].len = 2;
- xfer[1].buf = (u8 *)&data;
-
- ret = i2c_transfer(client->adapter, xfer, 2);
- if (ret != 2) {
- dev_err(&client->dev, "i2c_transfer() returned %d\n", ret);
- return 0;
- }
-
- return (data >> 8) | ((data & 0xff) << 8);
-}
-
-static unsigned int wm9081_read(struct snd_soc_codec *codec, unsigned int reg)
-{
- if (wm9081_reg_is_volatile(reg))
- return wm9081_read_hw(codec, reg);
- else
- return wm9081_read_reg_cache(codec, reg);
-}
-
-static int wm9081_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u16 *cache = codec->reg_cache;
- u8 data[3];
-
- BUG_ON(reg > WM9081_MAX_REGISTER);
-
- if (!wm9081_reg_is_volatile(reg))
- cache[reg] = value;
-
- data[0] = reg;
- data[1] = value >> 8;
- data[2] = value & 0x00ff;
-
- if (codec->hw_write(codec->control_data, data, 3) == 3)
- return 0;
- else
- return -EIO;
-}
-
static int wm9081_reset(struct snd_soc_codec *codec)
{
- return wm9081_write(codec, WM9081_SOFTWARE_RESET, 0);
+ return snd_soc_write(codec, WM9081_SOFTWARE_RESET, 0);
}
static const DECLARE_TLV_DB_SCALE(drc_in_tlv, -4500, 75, 0);
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
unsigned int reg;
- reg = wm9081_read(codec, WM9081_ANALOGUE_SPEAKER_2);
+ reg = snd_soc_read(codec, WM9081_ANALOGUE_SPEAKER_2);
if (reg & WM9081_SPK_MODE)
ucontrol->value.integer.value[0] = 1;
else
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
- unsigned int reg_pwr = wm9081_read(codec, WM9081_POWER_MANAGEMENT);
- unsigned int reg2 = wm9081_read(codec, WM9081_ANALOGUE_SPEAKER_2);
+ unsigned int reg_pwr = snd_soc_read(codec, WM9081_POWER_MANAGEMENT);
+ unsigned int reg2 = snd_soc_read(codec, WM9081_ANALOGUE_SPEAKER_2);
/* Are we changing anything? */
if (ucontrol->value.integer.value[0] ==
reg2 &= ~WM9081_SPK_MODE;
}
- wm9081_write(codec, WM9081_ANALOGUE_SPEAKER_2, reg2);
+ snd_soc_write(codec, WM9081_ANALOGUE_SPEAKER_2, reg2);
return 0;
}
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_codec *codec = w->codec;
- unsigned int reg = wm9081_read(codec, WM9081_POWER_MANAGEMENT);
+ unsigned int reg = snd_soc_read(codec, WM9081_POWER_MANAGEMENT);
switch (event) {
case SND_SOC_DAPM_POST_PMU:
break;
}
- wm9081_write(codec, WM9081_POWER_MANAGEMENT, reg);
+ snd_soc_write(codec, WM9081_POWER_MANAGEMENT, reg);
return 0;
}
if (ret != 0)
return ret;
- reg5 = wm9081_read(codec, WM9081_FLL_CONTROL_5);
+ reg5 = snd_soc_read(codec, WM9081_FLL_CONTROL_5);
reg5 &= ~WM9081_FLL_CLK_SRC_MASK;
switch (fll_id) {
}
/* Disable CLK_SYS while we reconfigure */
- clk_sys_reg = wm9081_read(codec, WM9081_CLOCK_CONTROL_3);
+ clk_sys_reg = snd_soc_read(codec, WM9081_CLOCK_CONTROL_3);
if (clk_sys_reg & WM9081_CLK_SYS_ENA)
- wm9081_write(codec, WM9081_CLOCK_CONTROL_3,
+ snd_soc_write(codec, WM9081_CLOCK_CONTROL_3,
clk_sys_reg & ~WM9081_CLK_SYS_ENA);
/* Any FLL configuration change requires that the FLL be
* disabled first. */
- reg1 = wm9081_read(codec, WM9081_FLL_CONTROL_1);
+ reg1 = snd_soc_read(codec, WM9081_FLL_CONTROL_1);
reg1 &= ~WM9081_FLL_ENA;
- wm9081_write(codec, WM9081_FLL_CONTROL_1, reg1);
+ snd_soc_write(codec, WM9081_FLL_CONTROL_1, reg1);
/* Apply the configuration */
if (fll_div.k)
reg1 |= WM9081_FLL_FRAC_MASK;
else
reg1 &= ~WM9081_FLL_FRAC_MASK;
- wm9081_write(codec, WM9081_FLL_CONTROL_1, reg1);
+ snd_soc_write(codec, WM9081_FLL_CONTROL_1, reg1);
- wm9081_write(codec, WM9081_FLL_CONTROL_2,
+ snd_soc_write(codec, WM9081_FLL_CONTROL_2,
(fll_div.fll_outdiv << WM9081_FLL_OUTDIV_SHIFT) |
(fll_div.fll_fratio << WM9081_FLL_FRATIO_SHIFT));
- wm9081_write(codec, WM9081_FLL_CONTROL_3, fll_div.k);
+ snd_soc_write(codec, WM9081_FLL_CONTROL_3, fll_div.k);
- reg4 = wm9081_read(codec, WM9081_FLL_CONTROL_4);
+ reg4 = snd_soc_read(codec, WM9081_FLL_CONTROL_4);
reg4 &= ~WM9081_FLL_N_MASK;
reg4 |= fll_div.n << WM9081_FLL_N_SHIFT;
- wm9081_write(codec, WM9081_FLL_CONTROL_4, reg4);
+ snd_soc_write(codec, WM9081_FLL_CONTROL_4, reg4);
reg5 &= ~WM9081_FLL_CLK_REF_DIV_MASK;
reg5 |= fll_div.fll_clk_ref_div << WM9081_FLL_CLK_REF_DIV_SHIFT;
- wm9081_write(codec, WM9081_FLL_CONTROL_5, reg5);
+ snd_soc_write(codec, WM9081_FLL_CONTROL_5, reg5);
/* Enable the FLL */
- wm9081_write(codec, WM9081_FLL_CONTROL_1, reg1 | WM9081_FLL_ENA);
+ snd_soc_write(codec, WM9081_FLL_CONTROL_1, reg1 | WM9081_FLL_ENA);
/* Then bring CLK_SYS up again if it was disabled */
if (clk_sys_reg & WM9081_CLK_SYS_ENA)
- wm9081_write(codec, WM9081_CLOCK_CONTROL_3, clk_sys_reg);
+ snd_soc_write(codec, WM9081_CLOCK_CONTROL_3, clk_sys_reg);
dev_dbg(codec->dev, "FLL enabled at %dHz->%dHz\n", Fref, Fout);
target > 3000000)
break;
}
+
+ if (i == ARRAY_SIZE(clk_sys_rates))
+ return -EINVAL;
+
} else if (wm9081->fs) {
for (i = 0; i < ARRAY_SIZE(clk_sys_rates); i++) {
new_sysclk = clk_sys_rates[i].ratio
if (new_sysclk > 3000000)
break;
}
+
+ if (i == ARRAY_SIZE(clk_sys_rates))
+ return -EINVAL;
+
} else {
new_sysclk = 12288000;
}
return -EINVAL;
}
- reg = wm9081_read(codec, WM9081_CLOCK_CONTROL_1);
+ reg = snd_soc_read(codec, WM9081_CLOCK_CONTROL_1);
if (mclkdiv)
reg |= WM9081_MCLKDIV2;
else
reg &= ~WM9081_MCLKDIV2;
- wm9081_write(codec, WM9081_CLOCK_CONTROL_1, reg);
+ snd_soc_write(codec, WM9081_CLOCK_CONTROL_1, reg);
- reg = wm9081_read(codec, WM9081_CLOCK_CONTROL_3);
+ reg = snd_soc_read(codec, WM9081_CLOCK_CONTROL_3);
if (fll)
reg |= WM9081_CLK_SRC_SEL;
else
reg &= ~WM9081_CLK_SRC_SEL;
- wm9081_write(codec, WM9081_CLOCK_CONTROL_3, reg);
+ snd_soc_write(codec, WM9081_CLOCK_CONTROL_3, reg);
dev_dbg(codec->dev, "CLK_SYS is %dHz\n", wm9081->sysclk_rate);
case SND_SOC_BIAS_PREPARE:
/* VMID=2*40k */
- reg = wm9081_read(codec, WM9081_VMID_CONTROL);
+ reg = snd_soc_read(codec, WM9081_VMID_CONTROL);
reg &= ~WM9081_VMID_SEL_MASK;
reg |= 0x2;
- wm9081_write(codec, WM9081_VMID_CONTROL, reg);
+ snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
/* Normal bias current */
- reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1);
+ reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
reg &= ~WM9081_STBY_BIAS_ENA;
- wm9081_write(codec, WM9081_BIAS_CONTROL_1, reg);
+ snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
break;
case SND_SOC_BIAS_STANDBY:
/* Initial cold start */
if (codec->bias_level == SND_SOC_BIAS_OFF) {
/* Disable LINEOUT discharge */
- reg = wm9081_read(codec, WM9081_ANTI_POP_CONTROL);
+ reg = snd_soc_read(codec, WM9081_ANTI_POP_CONTROL);
reg &= ~WM9081_LINEOUT_DISCH;
- wm9081_write(codec, WM9081_ANTI_POP_CONTROL, reg);
+ snd_soc_write(codec, WM9081_ANTI_POP_CONTROL, reg);
/* Select startup bias source */
- reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1);
+ reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
reg |= WM9081_BIAS_SRC | WM9081_BIAS_ENA;
- wm9081_write(codec, WM9081_BIAS_CONTROL_1, reg);
+ snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
/* VMID 2*4k; Soft VMID ramp enable */
- reg = wm9081_read(codec, WM9081_VMID_CONTROL);
+ reg = snd_soc_read(codec, WM9081_VMID_CONTROL);
reg |= WM9081_VMID_RAMP | 0x6;
- wm9081_write(codec, WM9081_VMID_CONTROL, reg);
+ snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
mdelay(100);
/* Normal bias enable & soft start off */
reg |= WM9081_BIAS_ENA;
reg &= ~WM9081_VMID_RAMP;
- wm9081_write(codec, WM9081_VMID_CONTROL, reg);
+ snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
/* Standard bias source */
- reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1);
+ reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
reg &= ~WM9081_BIAS_SRC;
- wm9081_write(codec, WM9081_BIAS_CONTROL_1, reg);
+ snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
}
/* VMID 2*240k */
- reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1);
+ reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
reg &= ~WM9081_VMID_SEL_MASK;
reg |= 0x40;
- wm9081_write(codec, WM9081_VMID_CONTROL, reg);
+ snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
/* Standby bias current on */
- reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1);
+ reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
reg |= WM9081_STBY_BIAS_ENA;
- wm9081_write(codec, WM9081_BIAS_CONTROL_1, reg);
+ snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
break;
case SND_SOC_BIAS_OFF:
/* Startup bias source */
- reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1);
+ reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
reg |= WM9081_BIAS_SRC;
- wm9081_write(codec, WM9081_BIAS_CONTROL_1, reg);
+ snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
/* Disable VMID and biases with soft ramping */
- reg = wm9081_read(codec, WM9081_VMID_CONTROL);
+ reg = snd_soc_read(codec, WM9081_VMID_CONTROL);
reg &= ~(WM9081_VMID_SEL_MASK | WM9081_BIAS_ENA);
reg |= WM9081_VMID_RAMP;
- wm9081_write(codec, WM9081_VMID_CONTROL, reg);
+ snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
/* Actively discharge LINEOUT */
- reg = wm9081_read(codec, WM9081_ANTI_POP_CONTROL);
+ reg = snd_soc_read(codec, WM9081_ANTI_POP_CONTROL);
reg |= WM9081_LINEOUT_DISCH;
- wm9081_write(codec, WM9081_ANTI_POP_CONTROL, reg);
+ snd_soc_write(codec, WM9081_ANTI_POP_CONTROL, reg);
break;
}
{
struct snd_soc_codec *codec = dai->codec;
struct wm9081_priv *wm9081 = codec->private_data;
- unsigned int aif2 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_2);
+ unsigned int aif2 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_2);
aif2 &= ~(WM9081_AIF_BCLK_INV | WM9081_AIF_LRCLK_INV |
WM9081_BCLK_DIR | WM9081_LRCLK_DIR | WM9081_AIF_FMT_MASK);
return -EINVAL;
}
- wm9081_write(codec, WM9081_AUDIO_INTERFACE_2, aif2);
+ snd_soc_write(codec, WM9081_AUDIO_INTERFACE_2, aif2);
return 0;
}
int ret, i, best, best_val, cur_val;
unsigned int clk_ctrl2, aif1, aif2, aif3, aif4;
- clk_ctrl2 = wm9081_read(codec, WM9081_CLOCK_CONTROL_2);
+ clk_ctrl2 = snd_soc_read(codec, WM9081_CLOCK_CONTROL_2);
clk_ctrl2 &= ~(WM9081_CLK_SYS_RATE_MASK | WM9081_SAMPLE_RATE_MASK);
- aif1 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_1);
+ aif1 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_1);
- aif2 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_2);
+ aif2 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_2);
aif2 &= ~WM9081_AIF_WL_MASK;
- aif3 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_3);
+ aif3 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_3);
aif3 &= ~WM9081_BCLK_DIV_MASK;
- aif4 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_4);
+ aif4 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_4);
aif4 &= ~WM9081_LRCLK_RATE_MASK;
- /* What BCLK do we need? */
wm9081->fs = params_rate(params);
- wm9081->bclk = 2 * wm9081->fs;
- switch (params_format(params)) {
- case SNDRV_PCM_FORMAT_S16_LE:
- wm9081->bclk *= 16;
- break;
- case SNDRV_PCM_FORMAT_S20_3LE:
- wm9081->bclk *= 20;
- aif2 |= 0x4;
- break;
- case SNDRV_PCM_FORMAT_S24_LE:
- wm9081->bclk *= 24;
- aif2 |= 0x8;
- break;
- case SNDRV_PCM_FORMAT_S32_LE:
- wm9081->bclk *= 32;
- aif2 |= 0xc;
- break;
- default:
- return -EINVAL;
- }
- if (aif1 & WM9081_AIFDAC_TDM_MODE_MASK) {
+ if (wm9081->tdm_width) {
+ /* If TDM is set up then that fixes our BCLK. */
int slots = ((aif1 & WM9081_AIFDAC_TDM_MODE_MASK) >>
WM9081_AIFDAC_TDM_MODE_SHIFT) + 1;
- wm9081->bclk *= slots;
+
+ wm9081->bclk = wm9081->fs * wm9081->tdm_width * slots;
+ } else {
+ /* Otherwise work out a BCLK from the sample size */
+ wm9081->bclk = 2 * wm9081->fs;
+
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ wm9081->bclk *= 16;
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ wm9081->bclk *= 20;
+ aif2 |= 0x4;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ wm9081->bclk *= 24;
+ aif2 |= 0x8;
+ break;
+ case SNDRV_PCM_FORMAT_S32_LE:
+ wm9081->bclk *= 32;
+ aif2 |= 0xc;
+ break;
+ default:
+ return -EINVAL;
+ }
}
dev_dbg(codec->dev, "Target BCLK is %dHz\n", wm9081->bclk);
s->name, s->rate);
/* If the EQ is enabled then disable it while we write out */
- eq1 = wm9081_read(codec, WM9081_EQ_1) & WM9081_EQ_ENA;
+ eq1 = snd_soc_read(codec, WM9081_EQ_1) & WM9081_EQ_ENA;
if (eq1 & WM9081_EQ_ENA)
- wm9081_write(codec, WM9081_EQ_1, 0);
+ snd_soc_write(codec, WM9081_EQ_1, 0);
/* Write out the other values */
for (i = 1; i < ARRAY_SIZE(s->config); i++)
- wm9081_write(codec, WM9081_EQ_1 + i, s->config[i]);
+ snd_soc_write(codec, WM9081_EQ_1 + i, s->config[i]);
eq1 |= (s->config[0] & ~WM9081_EQ_ENA);
- wm9081_write(codec, WM9081_EQ_1, eq1);
+ snd_soc_write(codec, WM9081_EQ_1, eq1);
}
- wm9081_write(codec, WM9081_CLOCK_CONTROL_2, clk_ctrl2);
- wm9081_write(codec, WM9081_AUDIO_INTERFACE_2, aif2);
- wm9081_write(codec, WM9081_AUDIO_INTERFACE_3, aif3);
- wm9081_write(codec, WM9081_AUDIO_INTERFACE_4, aif4);
+ snd_soc_write(codec, WM9081_CLOCK_CONTROL_2, clk_ctrl2);
+ snd_soc_write(codec, WM9081_AUDIO_INTERFACE_2, aif2);
+ snd_soc_write(codec, WM9081_AUDIO_INTERFACE_3, aif3);
+ snd_soc_write(codec, WM9081_AUDIO_INTERFACE_4, aif4);
return 0;
}
struct snd_soc_codec *codec = codec_dai->codec;
unsigned int reg;
- reg = wm9081_read(codec, WM9081_DAC_DIGITAL_2);
+ reg = snd_soc_read(codec, WM9081_DAC_DIGITAL_2);
if (mute)
reg |= WM9081_DAC_MUTE;
else
reg &= ~WM9081_DAC_MUTE;
- wm9081_write(codec, WM9081_DAC_DIGITAL_2, reg);
+ snd_soc_write(codec, WM9081_DAC_DIGITAL_2, reg);
return 0;
}
}
static int wm9081_set_tdm_slot(struct snd_soc_dai *dai,
- unsigned int mask, int slots)
+ unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width)
{
struct snd_soc_codec *codec = dai->codec;
- unsigned int aif1 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_1);
+ struct wm9081_priv *wm9081 = codec->private_data;
+ unsigned int aif1 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_1);
aif1 &= ~(WM9081_AIFDAC_TDM_SLOT_MASK | WM9081_AIFDAC_TDM_MODE_MASK);
- if (slots < 1 || slots > 4)
+ if (slots < 0 || slots > 4)
return -EINVAL;
+ wm9081->tdm_width = slot_width;
+
+ if (slots == 0)
+ slots = 1;
+
aif1 |= (slots - 1) << WM9081_AIFDAC_TDM_MODE_SHIFT;
- switch (mask) {
+ switch (rx_mask) {
case 1:
break;
case 2:
return -EINVAL;
}
- wm9081_write(codec, WM9081_AUDIO_INTERFACE_1, aif1);
+ snd_soc_write(codec, WM9081_AUDIO_INTERFACE_1, aif1);
return 0;
}
if (i == WM9081_SOFTWARE_RESET)
continue;
- wm9081_write(codec, i, reg_cache[i]);
+ snd_soc_write(codec, i, reg_cache[i]);
}
wm9081_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
};
EXPORT_SYMBOL_GPL(soc_codec_dev_wm9081);
-static int wm9081_register(struct wm9081_priv *wm9081)
+static int wm9081_register(struct wm9081_priv *wm9081,
+ enum snd_soc_control_type control)
{
struct snd_soc_codec *codec = &wm9081->codec;
int ret;
codec->private_data = wm9081;
codec->name = "WM9081";
codec->owner = THIS_MODULE;
- codec->read = wm9081_read;
- codec->write = wm9081_write;
codec->dai = &wm9081_dai;
codec->num_dai = 1;
codec->reg_cache_size = ARRAY_SIZE(wm9081->reg_cache);
codec->reg_cache = &wm9081->reg_cache;
codec->bias_level = SND_SOC_BIAS_OFF;
codec->set_bias_level = wm9081_set_bias_level;
+ codec->volatile_register = wm9081_volatile_register;
memcpy(codec->reg_cache, wm9081_reg_defaults,
sizeof(wm9081_reg_defaults));
- reg = wm9081_read_hw(codec, WM9081_SOFTWARE_RESET);
+ ret = snd_soc_codec_set_cache_io(codec, 8, 16, control);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+ return ret;
+ }
+
+ reg = snd_soc_read(codec, WM9081_SOFTWARE_RESET);
if (reg != 0x9081) {
dev_err(codec->dev, "Device is not a WM9081: ID=0x%x\n", reg);
ret = -EINVAL;
wm9081_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
/* Enable zero cross by default */
- reg = wm9081_read(codec, WM9081_ANALOGUE_LINEOUT);
- wm9081_write(codec, WM9081_ANALOGUE_LINEOUT, reg | WM9081_LINEOUTZC);
- reg = wm9081_read(codec, WM9081_ANALOGUE_SPEAKER_PGA);
- wm9081_write(codec, WM9081_ANALOGUE_SPEAKER_PGA,
+ reg = snd_soc_read(codec, WM9081_ANALOGUE_LINEOUT);
+ snd_soc_write(codec, WM9081_ANALOGUE_LINEOUT, reg | WM9081_LINEOUTZC);
+ reg = snd_soc_read(codec, WM9081_ANALOGUE_SPEAKER_PGA);
+ snd_soc_write(codec, WM9081_ANALOGUE_SPEAKER_PGA,
reg | WM9081_SPKPGAZC);
wm9081_dai.dev = codec->dev;
codec->dev = &i2c->dev;
- return wm9081_register(wm9081);
+ return wm9081_register(wm9081, SND_SOC_I2C);
}
static __devexit int wm9081_i2c_remove(struct i2c_client *client)
return 0;
}
+#ifdef CONFIG_PM
+static int wm9081_i2c_suspend(struct i2c_client *client, pm_message_t msg)
+{
+ return snd_soc_suspend_device(&client->dev);
+}
+
+static int wm9081_i2c_resume(struct i2c_client *client)
+{
+ return snd_soc_resume_device(&client->dev);
+}
+#else
+#define wm9081_i2c_suspend NULL
+#define wm9081_i2c_resume NULL
+#endif
+
static const struct i2c_device_id wm9081_i2c_id[] = {
{ "wm9081", 0 },
{ }
},
.probe = wm9081_i2c_probe,
.remove = __devexit_p(wm9081_i2c_remove),
+ .suspend = wm9081_i2c_suspend,
+ .resume = wm9081_i2c_resume,
.id_table = wm9081_i2c_id,
};
ret = snd_soc_init_card(socdev);
if (ret < 0) {
printk(KERN_ERR "wm9705: failed to register card\n");
- goto pcm_err;
+ goto reset_err;
}
return 0;
--- /dev/null
+/*
+ * wm_hubs.c -- WM8993/4 common code
+ *
+ * Copyright 2009 Wolfson Microelectronics plc
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include "wm8993.h"
+#include "wm_hubs.h"
+
+const DECLARE_TLV_DB_SCALE(wm_hubs_spkmix_tlv, -300, 300, 0);
+EXPORT_SYMBOL_GPL(wm_hubs_spkmix_tlv);
+
+static const DECLARE_TLV_DB_SCALE(inpga_tlv, -1650, 150, 0);
+static const DECLARE_TLV_DB_SCALE(inmix_sw_tlv, 0, 3000, 0);
+static const DECLARE_TLV_DB_SCALE(inmix_tlv, -1500, 300, 1);
+static const DECLARE_TLV_DB_SCALE(earpiece_tlv, -600, 600, 0);
+static const DECLARE_TLV_DB_SCALE(outmix_tlv, -2100, 300, 0);
+static const DECLARE_TLV_DB_SCALE(spkmixout_tlv, -1800, 600, 1);
+static const DECLARE_TLV_DB_SCALE(outpga_tlv, -5700, 100, 0);
+static const unsigned int spkboost_tlv[] = {
+ TLV_DB_RANGE_HEAD(7),
+ 0, 6, TLV_DB_SCALE_ITEM(0, 150, 0),
+ 7, 7, TLV_DB_SCALE_ITEM(1200, 0, 0),
+};
+static const DECLARE_TLV_DB_SCALE(line_tlv, -600, 600, 0);
+
+static const char *speaker_ref_text[] = {
+ "SPKVDD/2",
+ "VMID",
+};
+
+static const struct soc_enum speaker_ref =
+ SOC_ENUM_SINGLE(WM8993_SPEAKER_MIXER, 8, 2, speaker_ref_text);
+
+static const char *speaker_mode_text[] = {
+ "Class D",
+ "Class AB",
+};
+
+static const struct soc_enum speaker_mode =
+ SOC_ENUM_SINGLE(WM8993_SPKMIXR_ATTENUATION, 8, 2, speaker_mode_text);
+
+static void wait_for_dc_servo(struct snd_soc_codec *codec)
+{
+ unsigned int reg;
+ int count = 0;
+
+ dev_dbg(codec->dev, "Waiting for DC servo...\n");
+ do {
+ count++;
+ msleep(1);
+ reg = snd_soc_read(codec, WM8993_DC_SERVO_READBACK_0);
+ dev_dbg(codec->dev, "DC servo status: %x\n", reg);
+ } while ((reg & WM8993_DCS_CAL_COMPLETE_MASK)
+ != WM8993_DCS_CAL_COMPLETE_MASK && count < 1000);
+
+ if ((reg & WM8993_DCS_CAL_COMPLETE_MASK)
+ != WM8993_DCS_CAL_COMPLETE_MASK)
+ dev_err(codec->dev, "Timed out waiting for DC Servo\n");
+}
+
+/*
+ * Update the DC servo calibration on gain changes
+ */
+static int wm8993_put_dc_servo(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ int ret;
+
+ ret = snd_soc_put_volsw_2r(kcontrol, ucontrol);
+
+ /* Only need to do this if the outputs are active */
+ if (snd_soc_read(codec, WM8993_POWER_MANAGEMENT_1)
+ & (WM8993_HPOUT1L_ENA | WM8993_HPOUT1R_ENA))
+ snd_soc_update_bits(codec,
+ WM8993_DC_SERVO_0,
+ WM8993_DCS_TRIG_SINGLE_0 |
+ WM8993_DCS_TRIG_SINGLE_1,
+ WM8993_DCS_TRIG_SINGLE_0 |
+ WM8993_DCS_TRIG_SINGLE_1);
+
+ return ret;
+}
+
+static const struct snd_kcontrol_new analogue_snd_controls[] = {
+SOC_SINGLE_TLV("IN1L Volume", WM8993_LEFT_LINE_INPUT_1_2_VOLUME, 0, 31, 0,
+ inpga_tlv),
+SOC_SINGLE("IN1L Switch", WM8993_LEFT_LINE_INPUT_1_2_VOLUME, 7, 1, 1),
+SOC_SINGLE("IN1L ZC Switch", WM8993_LEFT_LINE_INPUT_1_2_VOLUME, 7, 1, 0),
+
+SOC_SINGLE_TLV("IN1R Volume", WM8993_RIGHT_LINE_INPUT_1_2_VOLUME, 0, 31, 0,
+ inpga_tlv),
+SOC_SINGLE("IN1R Switch", WM8993_RIGHT_LINE_INPUT_1_2_VOLUME, 7, 1, 1),
+SOC_SINGLE("IN1R ZC Switch", WM8993_RIGHT_LINE_INPUT_1_2_VOLUME, 7, 1, 0),
+
+
+SOC_SINGLE_TLV("IN2L Volume", WM8993_LEFT_LINE_INPUT_3_4_VOLUME, 0, 31, 0,
+ inpga_tlv),
+SOC_SINGLE("IN2L Switch", WM8993_LEFT_LINE_INPUT_3_4_VOLUME, 7, 1, 1),
+SOC_SINGLE("IN2L ZC Switch", WM8993_LEFT_LINE_INPUT_3_4_VOLUME, 7, 1, 0),
+
+SOC_SINGLE_TLV("IN2R Volume", WM8993_RIGHT_LINE_INPUT_3_4_VOLUME, 0, 31, 0,
+ inpga_tlv),
+SOC_SINGLE("IN2R Switch", WM8993_RIGHT_LINE_INPUT_3_4_VOLUME, 7, 1, 1),
+SOC_SINGLE("IN2R ZC Switch", WM8993_RIGHT_LINE_INPUT_3_4_VOLUME, 7, 1, 0),
+
+SOC_SINGLE_TLV("MIXINL IN2L Volume", WM8993_INPUT_MIXER3, 7, 1, 0,
+ inmix_sw_tlv),
+SOC_SINGLE_TLV("MIXINL IN1L Volume", WM8993_INPUT_MIXER3, 4, 1, 0,
+ inmix_sw_tlv),
+SOC_SINGLE_TLV("MIXINL Output Record Volume", WM8993_INPUT_MIXER3, 0, 7, 0,
+ inmix_tlv),
+SOC_SINGLE_TLV("MIXINL IN1LP Volume", WM8993_INPUT_MIXER5, 6, 7, 0, inmix_tlv),
+SOC_SINGLE_TLV("MIXINL Direct Voice Volume", WM8993_INPUT_MIXER5, 0, 6, 0,
+ inmix_tlv),
+
+SOC_SINGLE_TLV("MIXINR IN2R Volume", WM8993_INPUT_MIXER4, 7, 1, 0,
+ inmix_sw_tlv),
+SOC_SINGLE_TLV("MIXINR IN1R Volume", WM8993_INPUT_MIXER4, 4, 1, 0,
+ inmix_sw_tlv),
+SOC_SINGLE_TLV("MIXINR Output Record Volume", WM8993_INPUT_MIXER4, 0, 7, 0,
+ inmix_tlv),
+SOC_SINGLE_TLV("MIXINR IN1RP Volume", WM8993_INPUT_MIXER6, 6, 7, 0, inmix_tlv),
+SOC_SINGLE_TLV("MIXINR Direct Voice Volume", WM8993_INPUT_MIXER6, 0, 6, 0,
+ inmix_tlv),
+
+SOC_SINGLE_TLV("Left Output Mixer IN2RN Volume", WM8993_OUTPUT_MIXER5, 6, 7, 1,
+ outmix_tlv),
+SOC_SINGLE_TLV("Left Output Mixer IN2LN Volume", WM8993_OUTPUT_MIXER3, 6, 7, 1,
+ outmix_tlv),
+SOC_SINGLE_TLV("Left Output Mixer IN2LP Volume", WM8993_OUTPUT_MIXER3, 9, 7, 1,
+ outmix_tlv),
+SOC_SINGLE_TLV("Left Output Mixer IN1L Volume", WM8993_OUTPUT_MIXER3, 0, 7, 1,
+ outmix_tlv),
+SOC_SINGLE_TLV("Left Output Mixer IN1R Volume", WM8993_OUTPUT_MIXER3, 3, 7, 1,
+ outmix_tlv),
+SOC_SINGLE_TLV("Left Output Mixer Right Input Volume",
+ WM8993_OUTPUT_MIXER5, 3, 7, 1, outmix_tlv),
+SOC_SINGLE_TLV("Left Output Mixer Left Input Volume",
+ WM8993_OUTPUT_MIXER5, 0, 7, 1, outmix_tlv),
+SOC_SINGLE_TLV("Left Output Mixer DAC Volume", WM8993_OUTPUT_MIXER5, 9, 7, 1,
+ outmix_tlv),
+
+SOC_SINGLE_TLV("Right Output Mixer IN2LN Volume",
+ WM8993_OUTPUT_MIXER6, 6, 7, 1, outmix_tlv),
+SOC_SINGLE_TLV("Right Output Mixer IN2RN Volume",
+ WM8993_OUTPUT_MIXER4, 6, 7, 1, outmix_tlv),
+SOC_SINGLE_TLV("Right Output Mixer IN1L Volume",
+ WM8993_OUTPUT_MIXER4, 3, 7, 1, outmix_tlv),
+SOC_SINGLE_TLV("Right Output Mixer IN1R Volume",
+ WM8993_OUTPUT_MIXER4, 0, 7, 1, outmix_tlv),
+SOC_SINGLE_TLV("Right Output Mixer IN2RP Volume",
+ WM8993_OUTPUT_MIXER4, 9, 7, 1, outmix_tlv),
+SOC_SINGLE_TLV("Right Output Mixer Left Input Volume",
+ WM8993_OUTPUT_MIXER6, 3, 7, 1, outmix_tlv),
+SOC_SINGLE_TLV("Right Output Mixer Right Input Volume",
+ WM8993_OUTPUT_MIXER6, 6, 7, 1, outmix_tlv),
+SOC_SINGLE_TLV("Right Output Mixer DAC Volume",
+ WM8993_OUTPUT_MIXER6, 9, 7, 1, outmix_tlv),
+
+SOC_DOUBLE_R_TLV("Output Volume", WM8993_LEFT_OPGA_VOLUME,
+ WM8993_RIGHT_OPGA_VOLUME, 0, 63, 0, outpga_tlv),
+SOC_DOUBLE_R("Output Switch", WM8993_LEFT_OPGA_VOLUME,
+ WM8993_RIGHT_OPGA_VOLUME, 6, 1, 0),
+SOC_DOUBLE_R("Output ZC Switch", WM8993_LEFT_OPGA_VOLUME,
+ WM8993_RIGHT_OPGA_VOLUME, 7, 1, 0),
+
+SOC_SINGLE("Earpiece Switch", WM8993_HPOUT2_VOLUME, 5, 1, 1),
+SOC_SINGLE_TLV("Earpiece Volume", WM8993_HPOUT2_VOLUME, 4, 1, 1, earpiece_tlv),
+
+SOC_SINGLE_TLV("SPKL Input Volume", WM8993_SPKMIXL_ATTENUATION,
+ 5, 1, 1, wm_hubs_spkmix_tlv),
+SOC_SINGLE_TLV("SPKL IN1LP Volume", WM8993_SPKMIXL_ATTENUATION,
+ 4, 1, 1, wm_hubs_spkmix_tlv),
+SOC_SINGLE_TLV("SPKL Output Volume", WM8993_SPKMIXL_ATTENUATION,
+ 3, 1, 1, wm_hubs_spkmix_tlv),
+
+SOC_SINGLE_TLV("SPKR Input Volume", WM8993_SPKMIXR_ATTENUATION,
+ 5, 1, 1, wm_hubs_spkmix_tlv),
+SOC_SINGLE_TLV("SPKR IN1RP Volume", WM8993_SPKMIXR_ATTENUATION,
+ 4, 1, 1, wm_hubs_spkmix_tlv),
+SOC_SINGLE_TLV("SPKR Output Volume", WM8993_SPKMIXR_ATTENUATION,
+ 3, 1, 1, wm_hubs_spkmix_tlv),
+
+SOC_DOUBLE_R_TLV("Speaker Mixer Volume",
+ WM8993_SPKMIXL_ATTENUATION, WM8993_SPKMIXR_ATTENUATION,
+ 0, 3, 1, spkmixout_tlv),
+SOC_DOUBLE_R_TLV("Speaker Volume",
+ WM8993_SPEAKER_VOLUME_LEFT, WM8993_SPEAKER_VOLUME_RIGHT,
+ 0, 63, 0, outpga_tlv),
+SOC_DOUBLE_R("Speaker Switch",
+ WM8993_SPEAKER_VOLUME_LEFT, WM8993_SPEAKER_VOLUME_RIGHT,
+ 6, 1, 0),
+SOC_DOUBLE_R("Speaker ZC Switch",
+ WM8993_SPEAKER_VOLUME_LEFT, WM8993_SPEAKER_VOLUME_RIGHT,
+ 7, 1, 0),
+SOC_DOUBLE_TLV("Speaker Boost Volume", WM8993_SPKOUT_BOOST, 0, 3, 7, 0,
+ spkboost_tlv),
+SOC_ENUM("Speaker Reference", speaker_ref),
+SOC_ENUM("Speaker Mode", speaker_mode),
+
+{
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Headphone Volume",
+ .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |
+ SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .tlv.p = outpga_tlv,
+ .info = snd_soc_info_volsw_2r,
+ .get = snd_soc_get_volsw_2r, .put = wm8993_put_dc_servo,
+ .private_value = (unsigned long)&(struct soc_mixer_control) {
+ .reg = WM8993_LEFT_OUTPUT_VOLUME,
+ .rreg = WM8993_RIGHT_OUTPUT_VOLUME,
+ .shift = 0, .max = 63
+ },
+},
+SOC_DOUBLE_R("Headphone Switch", WM8993_LEFT_OUTPUT_VOLUME,
+ WM8993_RIGHT_OUTPUT_VOLUME, 6, 1, 0),
+SOC_DOUBLE_R("Headphone ZC Switch", WM8993_LEFT_OUTPUT_VOLUME,
+ WM8993_RIGHT_OUTPUT_VOLUME, 7, 1, 0),
+
+SOC_SINGLE("LINEOUT1N Switch", WM8993_LINE_OUTPUTS_VOLUME, 6, 1, 1),
+SOC_SINGLE("LINEOUT1P Switch", WM8993_LINE_OUTPUTS_VOLUME, 5, 1, 1),
+SOC_SINGLE_TLV("LINEOUT1 Volume", WM8993_LINE_OUTPUTS_VOLUME, 4, 1, 1,
+ line_tlv),
+
+SOC_SINGLE("LINEOUT2N Switch", WM8993_LINE_OUTPUTS_VOLUME, 2, 1, 1),
+SOC_SINGLE("LINEOUT2P Switch", WM8993_LINE_OUTPUTS_VOLUME, 1, 1, 1),
+SOC_SINGLE_TLV("LINEOUT2 Volume", WM8993_LINE_OUTPUTS_VOLUME, 0, 1, 1,
+ line_tlv),
+};
+
+static int hp_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+ unsigned int reg = snd_soc_read(codec, WM8993_ANALOGUE_HP_0);
+
+ switch (event) {
+ case SND_SOC_DAPM_POST_PMU:
+ snd_soc_update_bits(codec, WM8993_CHARGE_PUMP_1,
+ WM8993_CP_ENA, WM8993_CP_ENA);
+
+ msleep(5);
+
+ snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
+ WM8993_HPOUT1L_ENA | WM8993_HPOUT1R_ENA,
+ WM8993_HPOUT1L_ENA | WM8993_HPOUT1R_ENA);
+
+ reg |= WM8993_HPOUT1L_DLY | WM8993_HPOUT1R_DLY;
+ snd_soc_write(codec, WM8993_ANALOGUE_HP_0, reg);
+
+ /* Start the DC servo */
+ snd_soc_update_bits(codec, WM8993_DC_SERVO_0,
+ 0xFFFF,
+ WM8993_DCS_ENA_CHAN_0 |
+ WM8993_DCS_ENA_CHAN_1 |
+ WM8993_DCS_TRIG_STARTUP_1 |
+ WM8993_DCS_TRIG_STARTUP_0);
+ wait_for_dc_servo(codec);
+
+ reg |= WM8993_HPOUT1R_OUTP | WM8993_HPOUT1R_RMV_SHORT |
+ WM8993_HPOUT1L_OUTP | WM8993_HPOUT1L_RMV_SHORT;
+ snd_soc_write(codec, WM8993_ANALOGUE_HP_0, reg);
+ break;
+
+ case SND_SOC_DAPM_PRE_PMD:
+ reg &= ~(WM8993_HPOUT1L_RMV_SHORT |
+ WM8993_HPOUT1L_DLY |
+ WM8993_HPOUT1L_OUTP |
+ WM8993_HPOUT1R_RMV_SHORT |
+ WM8993_HPOUT1R_DLY |
+ WM8993_HPOUT1R_OUTP);
+
+ snd_soc_update_bits(codec, WM8993_DC_SERVO_0,
+ 0xffff, 0);
+
+ snd_soc_write(codec, WM8993_ANALOGUE_HP_0, reg);
+ snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
+ WM8993_HPOUT1L_ENA | WM8993_HPOUT1R_ENA,
+ 0);
+
+ snd_soc_update_bits(codec, WM8993_CHARGE_PUMP_1,
+ WM8993_CP_ENA, 0);
+ break;
+ }
+
+ return 0;
+}
+
+static int earpiece_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *control, int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+ u16 reg = snd_soc_read(codec, WM8993_ANTIPOP1) & ~WM8993_HPOUT2_IN_ENA;
+
+ switch (event) {
+ case SND_SOC_DAPM_PRE_PMU:
+ reg |= WM8993_HPOUT2_IN_ENA;
+ snd_soc_write(codec, WM8993_ANTIPOP1, reg);
+ udelay(50);
+ break;
+
+ case SND_SOC_DAPM_POST_PMD:
+ snd_soc_write(codec, WM8993_ANTIPOP1, reg);
+ break;
+
+ default:
+ BUG();
+ break;
+ }
+
+ return 0;
+}
+
+static const struct snd_kcontrol_new in1l_pga[] = {
+SOC_DAPM_SINGLE("IN1LP Switch", WM8993_INPUT_MIXER2, 5, 1, 0),
+SOC_DAPM_SINGLE("IN1LN Switch", WM8993_INPUT_MIXER2, 4, 1, 0),
+};
+
+static const struct snd_kcontrol_new in1r_pga[] = {
+SOC_DAPM_SINGLE("IN1RP Switch", WM8993_INPUT_MIXER2, 1, 1, 0),
+SOC_DAPM_SINGLE("IN1RN Switch", WM8993_INPUT_MIXER2, 0, 1, 0),
+};
+
+static const struct snd_kcontrol_new in2l_pga[] = {
+SOC_DAPM_SINGLE("IN2LP Switch", WM8993_INPUT_MIXER2, 7, 1, 0),
+SOC_DAPM_SINGLE("IN2LN Switch", WM8993_INPUT_MIXER2, 6, 1, 0),
+};
+
+static const struct snd_kcontrol_new in2r_pga[] = {
+SOC_DAPM_SINGLE("IN2RP Switch", WM8993_INPUT_MIXER2, 3, 1, 0),
+SOC_DAPM_SINGLE("IN2RN Switch", WM8993_INPUT_MIXER2, 2, 1, 0),
+};
+
+static const struct snd_kcontrol_new mixinl[] = {
+SOC_DAPM_SINGLE("IN2L Switch", WM8993_INPUT_MIXER3, 8, 1, 0),
+SOC_DAPM_SINGLE("IN1L Switch", WM8993_INPUT_MIXER3, 5, 1, 0),
+};
+
+static const struct snd_kcontrol_new mixinr[] = {
+SOC_DAPM_SINGLE("IN2R Switch", WM8993_INPUT_MIXER4, 8, 1, 0),
+SOC_DAPM_SINGLE("IN1R Switch", WM8993_INPUT_MIXER4, 5, 1, 0),
+};
+
+static const struct snd_kcontrol_new left_output_mixer[] = {
+SOC_DAPM_SINGLE("Right Input Switch", WM8993_OUTPUT_MIXER1, 7, 1, 0),
+SOC_DAPM_SINGLE("Left Input Switch", WM8993_OUTPUT_MIXER1, 6, 1, 0),
+SOC_DAPM_SINGLE("IN2RN Switch", WM8993_OUTPUT_MIXER1, 5, 1, 0),
+SOC_DAPM_SINGLE("IN2LN Switch", WM8993_OUTPUT_MIXER1, 4, 1, 0),
+SOC_DAPM_SINGLE("IN2LP Switch", WM8993_OUTPUT_MIXER1, 1, 1, 0),
+SOC_DAPM_SINGLE("IN1R Switch", WM8993_OUTPUT_MIXER1, 3, 1, 0),
+SOC_DAPM_SINGLE("IN1L Switch", WM8993_OUTPUT_MIXER1, 2, 1, 0),
+SOC_DAPM_SINGLE("DAC Switch", WM8993_OUTPUT_MIXER1, 0, 1, 0),
+};
+
+static const struct snd_kcontrol_new right_output_mixer[] = {
+SOC_DAPM_SINGLE("Left Input Switch", WM8993_OUTPUT_MIXER2, 7, 1, 0),
+SOC_DAPM_SINGLE("Right Input Switch", WM8993_OUTPUT_MIXER2, 6, 1, 0),
+SOC_DAPM_SINGLE("IN2LN Switch", WM8993_OUTPUT_MIXER2, 5, 1, 0),
+SOC_DAPM_SINGLE("IN2RN Switch", WM8993_OUTPUT_MIXER2, 4, 1, 0),
+SOC_DAPM_SINGLE("IN1L Switch", WM8993_OUTPUT_MIXER2, 3, 1, 0),
+SOC_DAPM_SINGLE("IN1R Switch", WM8993_OUTPUT_MIXER2, 2, 1, 0),
+SOC_DAPM_SINGLE("IN2RP Switch", WM8993_OUTPUT_MIXER2, 1, 1, 0),
+SOC_DAPM_SINGLE("DAC Switch", WM8993_OUTPUT_MIXER2, 0, 1, 0),
+};
+
+static const struct snd_kcontrol_new earpiece_mixer[] = {
+SOC_DAPM_SINGLE("Direct Voice Switch", WM8993_HPOUT2_MIXER, 5, 1, 0),
+SOC_DAPM_SINGLE("Left Output Switch", WM8993_HPOUT2_MIXER, 4, 1, 0),
+SOC_DAPM_SINGLE("Right Output Switch", WM8993_HPOUT2_MIXER, 3, 1, 0),
+};
+
+static const struct snd_kcontrol_new left_speaker_boost[] = {
+SOC_DAPM_SINGLE("Direct Voice Switch", WM8993_SPKOUT_MIXERS, 5, 1, 0),
+SOC_DAPM_SINGLE("SPKL Switch", WM8993_SPKOUT_MIXERS, 4, 1, 0),
+SOC_DAPM_SINGLE("SPKR Switch", WM8993_SPKOUT_MIXERS, 3, 1, 0),
+};
+
+static const struct snd_kcontrol_new right_speaker_boost[] = {
+SOC_DAPM_SINGLE("Direct Voice Switch", WM8993_SPKOUT_MIXERS, 2, 1, 0),
+SOC_DAPM_SINGLE("SPKL Switch", WM8993_SPKOUT_MIXERS, 1, 1, 0),
+SOC_DAPM_SINGLE("SPKR Switch", WM8993_SPKOUT_MIXERS, 0, 1, 0),
+};
+
+static const struct snd_kcontrol_new line1_mix[] = {
+SOC_DAPM_SINGLE("IN1R Switch", WM8993_LINE_MIXER1, 2, 1, 0),
+SOC_DAPM_SINGLE("IN1L Switch", WM8993_LINE_MIXER1, 1, 1, 0),
+SOC_DAPM_SINGLE("Output Switch", WM8993_LINE_MIXER1, 0, 1, 0),
+};
+
+static const struct snd_kcontrol_new line1n_mix[] = {
+SOC_DAPM_SINGLE("Left Output Switch", WM8993_LINE_MIXER1, 6, 1, 0),
+SOC_DAPM_SINGLE("Right Output Switch", WM8993_LINE_MIXER1, 5, 1, 0),
+};
+
+static const struct snd_kcontrol_new line1p_mix[] = {
+SOC_DAPM_SINGLE("Left Output Switch", WM8993_LINE_MIXER1, 0, 1, 0),
+};
+
+static const struct snd_kcontrol_new line2_mix[] = {
+SOC_DAPM_SINGLE("IN2R Switch", WM8993_LINE_MIXER2, 2, 1, 0),
+SOC_DAPM_SINGLE("IN2L Switch", WM8993_LINE_MIXER2, 1, 1, 0),
+SOC_DAPM_SINGLE("Output Switch", WM8993_LINE_MIXER2, 0, 1, 0),
+};
+
+static const struct snd_kcontrol_new line2n_mix[] = {
+SOC_DAPM_SINGLE("Left Output Switch", WM8993_LINE_MIXER2, 6, 1, 0),
+SOC_DAPM_SINGLE("Right Output Switch", WM8993_LINE_MIXER2, 5, 1, 0),
+};
+
+static const struct snd_kcontrol_new line2p_mix[] = {
+SOC_DAPM_SINGLE("Right Output Switch", WM8993_LINE_MIXER2, 0, 1, 0),
+};
+
+static const struct snd_soc_dapm_widget analogue_dapm_widgets[] = {
+SND_SOC_DAPM_INPUT("IN1LN"),
+SND_SOC_DAPM_INPUT("IN1LP"),
+SND_SOC_DAPM_INPUT("IN2LN"),
+SND_SOC_DAPM_INPUT("IN2LP/VXRN"),
+SND_SOC_DAPM_INPUT("IN1RN"),
+SND_SOC_DAPM_INPUT("IN1RP"),
+SND_SOC_DAPM_INPUT("IN2RN"),
+SND_SOC_DAPM_INPUT("IN2RP/VXRP"),
+
+SND_SOC_DAPM_MICBIAS("MICBIAS2", WM8993_POWER_MANAGEMENT_1, 5, 0),
+SND_SOC_DAPM_MICBIAS("MICBIAS1", WM8993_POWER_MANAGEMENT_1, 4, 0),
+
+SND_SOC_DAPM_MIXER("IN1L PGA", WM8993_POWER_MANAGEMENT_2, 6, 0,
+ in1l_pga, ARRAY_SIZE(in1l_pga)),
+SND_SOC_DAPM_MIXER("IN1R PGA", WM8993_POWER_MANAGEMENT_2, 4, 0,
+ in1r_pga, ARRAY_SIZE(in1r_pga)),
+
+SND_SOC_DAPM_MIXER("IN2L PGA", WM8993_POWER_MANAGEMENT_2, 7, 0,
+ in2l_pga, ARRAY_SIZE(in2l_pga)),
+SND_SOC_DAPM_MIXER("IN2R PGA", WM8993_POWER_MANAGEMENT_2, 5, 0,
+ in2r_pga, ARRAY_SIZE(in2r_pga)),
+
+/* Dummy widgets to represent differential paths */
+SND_SOC_DAPM_PGA("Direct Voice", SND_SOC_NOPM, 0, 0, NULL, 0),
+
+SND_SOC_DAPM_MIXER("MIXINL", WM8993_POWER_MANAGEMENT_2, 9, 0,
+ mixinl, ARRAY_SIZE(mixinl)),
+SND_SOC_DAPM_MIXER("MIXINR", WM8993_POWER_MANAGEMENT_2, 8, 0,
+ mixinr, ARRAY_SIZE(mixinr)),
+
+SND_SOC_DAPM_MIXER("Left Output Mixer", WM8993_POWER_MANAGEMENT_3, 5, 0,
+ left_output_mixer, ARRAY_SIZE(left_output_mixer)),
+SND_SOC_DAPM_MIXER("Right Output Mixer", WM8993_POWER_MANAGEMENT_3, 4, 0,
+ right_output_mixer, ARRAY_SIZE(right_output_mixer)),
+
+SND_SOC_DAPM_PGA("Left Output PGA", WM8993_POWER_MANAGEMENT_3, 7, 0, NULL, 0),
+SND_SOC_DAPM_PGA("Right Output PGA", WM8993_POWER_MANAGEMENT_3, 6, 0, NULL, 0),
+
+SND_SOC_DAPM_PGA_E("Headphone PGA", SND_SOC_NOPM, 0, 0,
+ NULL, 0,
+ hp_event, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
+
+SND_SOC_DAPM_MIXER("Earpiece Mixer", SND_SOC_NOPM, 0, 0,
+ earpiece_mixer, ARRAY_SIZE(earpiece_mixer)),
+SND_SOC_DAPM_PGA_E("Earpiece Driver", WM8993_POWER_MANAGEMENT_1, 11, 0,
+ NULL, 0, earpiece_event,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+
+SND_SOC_DAPM_MIXER("SPKL Boost", SND_SOC_NOPM, 0, 0,
+ left_speaker_boost, ARRAY_SIZE(left_speaker_boost)),
+SND_SOC_DAPM_MIXER("SPKR Boost", SND_SOC_NOPM, 0, 0,
+ right_speaker_boost, ARRAY_SIZE(right_speaker_boost)),
+
+SND_SOC_DAPM_PGA("SPKL Driver", WM8993_POWER_MANAGEMENT_1, 12, 0,
+ NULL, 0),
+SND_SOC_DAPM_PGA("SPKR Driver", WM8993_POWER_MANAGEMENT_1, 13, 0,
+ NULL, 0),
+
+SND_SOC_DAPM_MIXER("LINEOUT1 Mixer", SND_SOC_NOPM, 0, 0,
+ line1_mix, ARRAY_SIZE(line1_mix)),
+SND_SOC_DAPM_MIXER("LINEOUT2 Mixer", SND_SOC_NOPM, 0, 0,
+ line2_mix, ARRAY_SIZE(line2_mix)),
+
+SND_SOC_DAPM_MIXER("LINEOUT1N Mixer", SND_SOC_NOPM, 0, 0,
+ line1n_mix, ARRAY_SIZE(line1n_mix)),
+SND_SOC_DAPM_MIXER("LINEOUT1P Mixer", SND_SOC_NOPM, 0, 0,
+ line1p_mix, ARRAY_SIZE(line1p_mix)),
+SND_SOC_DAPM_MIXER("LINEOUT2N Mixer", SND_SOC_NOPM, 0, 0,
+ line2n_mix, ARRAY_SIZE(line2n_mix)),
+SND_SOC_DAPM_MIXER("LINEOUT2P Mixer", SND_SOC_NOPM, 0, 0,
+ line2p_mix, ARRAY_SIZE(line2p_mix)),
+
+SND_SOC_DAPM_PGA("LINEOUT1N Driver", WM8993_POWER_MANAGEMENT_3, 13, 0,
+ NULL, 0),
+SND_SOC_DAPM_PGA("LINEOUT1P Driver", WM8993_POWER_MANAGEMENT_3, 12, 0,
+ NULL, 0),
+SND_SOC_DAPM_PGA("LINEOUT2N Driver", WM8993_POWER_MANAGEMENT_3, 11, 0,
+ NULL, 0),
+SND_SOC_DAPM_PGA("LINEOUT2P Driver", WM8993_POWER_MANAGEMENT_3, 10, 0,
+ NULL, 0),
+
+SND_SOC_DAPM_OUTPUT("SPKOUTLP"),
+SND_SOC_DAPM_OUTPUT("SPKOUTLN"),
+SND_SOC_DAPM_OUTPUT("SPKOUTRP"),
+SND_SOC_DAPM_OUTPUT("SPKOUTRN"),
+SND_SOC_DAPM_OUTPUT("HPOUT1L"),
+SND_SOC_DAPM_OUTPUT("HPOUT1R"),
+SND_SOC_DAPM_OUTPUT("HPOUT2P"),
+SND_SOC_DAPM_OUTPUT("HPOUT2N"),
+SND_SOC_DAPM_OUTPUT("LINEOUT1P"),
+SND_SOC_DAPM_OUTPUT("LINEOUT1N"),
+SND_SOC_DAPM_OUTPUT("LINEOUT2P"),
+SND_SOC_DAPM_OUTPUT("LINEOUT2N"),
+};
+
+static const struct snd_soc_dapm_route analogue_routes[] = {
+ { "IN1L PGA", "IN1LP Switch", "IN1LP" },
+ { "IN1L PGA", "IN1LN Switch", "IN1LN" },
+
+ { "IN1R PGA", "IN1RP Switch", "IN1RP" },
+ { "IN1R PGA", "IN1RN Switch", "IN1RN" },
+
+ { "IN2L PGA", "IN2LP Switch", "IN2LP/VXRN" },
+ { "IN2L PGA", "IN2LN Switch", "IN2LN" },
+
+ { "IN2R PGA", "IN2RP Switch", "IN2RP/VXRP" },
+ { "IN2R PGA", "IN2RN Switch", "IN2RN" },
+
+ { "Direct Voice", NULL, "IN2LP/VXRN" },
+ { "Direct Voice", NULL, "IN2RP/VXRP" },
+
+ { "MIXINL", "IN1L Switch", "IN1L PGA" },
+ { "MIXINL", "IN2L Switch", "IN2L PGA" },
+ { "MIXINL", NULL, "Direct Voice" },
+ { "MIXINL", NULL, "IN1LP" },
+ { "MIXINL", NULL, "Left Output Mixer" },
+
+ { "MIXINR", "IN1R Switch", "IN1R PGA" },
+ { "MIXINR", "IN2R Switch", "IN2R PGA" },
+ { "MIXINR", NULL, "Direct Voice" },
+ { "MIXINR", NULL, "IN1RP" },
+ { "MIXINR", NULL, "Right Output Mixer" },
+
+ { "ADCL", NULL, "MIXINL" },
+ { "ADCR", NULL, "MIXINR" },
+
+ { "Left Output Mixer", "Left Input Switch", "MIXINL" },
+ { "Left Output Mixer", "Right Input Switch", "MIXINR" },
+ { "Left Output Mixer", "IN2RN Switch", "IN2RN" },
+ { "Left Output Mixer", "IN2LN Switch", "IN2LN" },
+ { "Left Output Mixer", "IN2LP Switch", "IN2LP/VXRN" },
+ { "Left Output Mixer", "IN1L Switch", "IN1L PGA" },
+ { "Left Output Mixer", "IN1R Switch", "IN1R PGA" },
+
+ { "Right Output Mixer", "Left Input Switch", "MIXINL" },
+ { "Right Output Mixer", "Right Input Switch", "MIXINR" },
+ { "Right Output Mixer", "IN2LN Switch", "IN2LN" },
+ { "Right Output Mixer", "IN2RN Switch", "IN2RN" },
+ { "Right Output Mixer", "IN2RP Switch", "IN2RP/VXRP" },
+ { "Right Output Mixer", "IN1L Switch", "IN1L PGA" },
+ { "Right Output Mixer", "IN1R Switch", "IN1R PGA" },
+
+ { "Left Output PGA", NULL, "Left Output Mixer" },
+ { "Left Output PGA", NULL, "TOCLK" },
+
+ { "Right Output PGA", NULL, "Right Output Mixer" },
+ { "Right Output PGA", NULL, "TOCLK" },
+
+ { "Earpiece Mixer", "Direct Voice Switch", "Direct Voice" },
+ { "Earpiece Mixer", "Left Output Switch", "Left Output PGA" },
+ { "Earpiece Mixer", "Right Output Switch", "Right Output PGA" },
+
+ { "Earpiece Driver", NULL, "Earpiece Mixer" },
+ { "HPOUT2N", NULL, "Earpiece Driver" },
+ { "HPOUT2P", NULL, "Earpiece Driver" },
+
+ { "SPKL", "Input Switch", "MIXINL" },
+ { "SPKL", "IN1LP Switch", "IN1LP" },
+ { "SPKL", "Output Switch", "Left Output Mixer" },
+ { "SPKL", NULL, "TOCLK" },
+
+ { "SPKR", "Input Switch", "MIXINR" },
+ { "SPKR", "IN1RP Switch", "IN1RP" },
+ { "SPKR", "Output Switch", "Right Output Mixer" },
+ { "SPKR", NULL, "TOCLK" },
+
+ { "SPKL Boost", "Direct Voice Switch", "Direct Voice" },
+ { "SPKL Boost", "SPKL Switch", "SPKL" },
+ { "SPKL Boost", "SPKR Switch", "SPKR" },
+
+ { "SPKR Boost", "Direct Voice Switch", "Direct Voice" },
+ { "SPKR Boost", "SPKR Switch", "SPKR" },
+ { "SPKR Boost", "SPKL Switch", "SPKL" },
+
+ { "SPKL Driver", NULL, "SPKL Boost" },
+ { "SPKL Driver", NULL, "CLK_SYS" },
+
+ { "SPKR Driver", NULL, "SPKR Boost" },
+ { "SPKR Driver", NULL, "CLK_SYS" },
+
+ { "SPKOUTLP", NULL, "SPKL Driver" },
+ { "SPKOUTLN", NULL, "SPKL Driver" },
+ { "SPKOUTRP", NULL, "SPKR Driver" },
+ { "SPKOUTRN", NULL, "SPKR Driver" },
+
+ { "Left Headphone Mux", "Mixer", "Left Output Mixer" },
+ { "Right Headphone Mux", "Mixer", "Right Output Mixer" },
+
+ { "Headphone PGA", NULL, "Left Headphone Mux" },
+ { "Headphone PGA", NULL, "Right Headphone Mux" },
+ { "Headphone PGA", NULL, "CLK_SYS" },
+
+ { "HPOUT1L", NULL, "Headphone PGA" },
+ { "HPOUT1R", NULL, "Headphone PGA" },
+
+ { "LINEOUT1N", NULL, "LINEOUT1N Driver" },
+ { "LINEOUT1P", NULL, "LINEOUT1P Driver" },
+ { "LINEOUT2N", NULL, "LINEOUT2N Driver" },
+ { "LINEOUT2P", NULL, "LINEOUT2P Driver" },
+};
+
+static const struct snd_soc_dapm_route lineout1_diff_routes[] = {
+ { "LINEOUT1 Mixer", "IN1L Switch", "IN1L PGA" },
+ { "LINEOUT1 Mixer", "IN1R Switch", "IN1R PGA" },
+ { "LINEOUT1 Mixer", "Output Switch", "Left Output Mixer" },
+
+ { "LINEOUT1N Driver", NULL, "LINEOUT1 Mixer" },
+ { "LINEOUT1P Driver", NULL, "LINEOUT1 Mixer" },
+};
+
+static const struct snd_soc_dapm_route lineout1_se_routes[] = {
+ { "LINEOUT1N Mixer", "Left Output Switch", "Left Output Mixer" },
+ { "LINEOUT1N Mixer", "Right Output Switch", "Left Output Mixer" },
+
+ { "LINEOUT1P Mixer", "Left Output Switch", "Left Output Mixer" },
+
+ { "LINEOUT1N Driver", NULL, "LINEOUT1N Mixer" },
+ { "LINEOUT1P Driver", NULL, "LINEOUT1P Mixer" },
+};
+
+static const struct snd_soc_dapm_route lineout2_diff_routes[] = {
+ { "LINEOUT2 Mixer", "IN2L Switch", "IN2L PGA" },
+ { "LINEOUT2 Mixer", "IN2R Switch", "IN2R PGA" },
+ { "LINEOUT2 Mixer", "Output Switch", "Right Output Mixer" },
+
+ { "LINEOUT2N Driver", NULL, "LINEOUT2 Mixer" },
+ { "LINEOUT2P Driver", NULL, "LINEOUT2 Mixer" },
+};
+
+static const struct snd_soc_dapm_route lineout2_se_routes[] = {
+ { "LINEOUT2N Mixer", "Left Output Switch", "Left Output Mixer" },
+ { "LINEOUT2N Mixer", "Right Output Switch", "Left Output Mixer" },
+
+ { "LINEOUT2P Mixer", "Right Output Switch", "Right Output Mixer" },
+
+ { "LINEOUT2N Driver", NULL, "LINEOUT2N Mixer" },
+ { "LINEOUT2P Driver", NULL, "LINEOUT2P Mixer" },
+};
+
+int wm_hubs_add_analogue_controls(struct snd_soc_codec *codec)
+{
+ /* Latch volume update bits & default ZC on */
+ snd_soc_update_bits(codec, WM8993_LEFT_LINE_INPUT_1_2_VOLUME,
+ WM8993_IN1_VU, WM8993_IN1_VU);
+ snd_soc_update_bits(codec, WM8993_RIGHT_LINE_INPUT_1_2_VOLUME,
+ WM8993_IN1_VU, WM8993_IN1_VU);
+ snd_soc_update_bits(codec, WM8993_LEFT_LINE_INPUT_3_4_VOLUME,
+ WM8993_IN2_VU, WM8993_IN2_VU);
+ snd_soc_update_bits(codec, WM8993_RIGHT_LINE_INPUT_3_4_VOLUME,
+ WM8993_IN2_VU, WM8993_IN2_VU);
+
+ snd_soc_update_bits(codec, WM8993_SPEAKER_VOLUME_RIGHT,
+ WM8993_SPKOUT_VU, WM8993_SPKOUT_VU);
+
+ snd_soc_update_bits(codec, WM8993_LEFT_OUTPUT_VOLUME,
+ WM8993_HPOUT1L_ZC, WM8993_HPOUT1L_ZC);
+ snd_soc_update_bits(codec, WM8993_RIGHT_OUTPUT_VOLUME,
+ WM8993_HPOUT1_VU | WM8993_HPOUT1R_ZC,
+ WM8993_HPOUT1_VU | WM8993_HPOUT1R_ZC);
+
+ snd_soc_update_bits(codec, WM8993_LEFT_OPGA_VOLUME,
+ WM8993_MIXOUTL_ZC, WM8993_MIXOUTL_ZC);
+ snd_soc_update_bits(codec, WM8993_RIGHT_OPGA_VOLUME,
+ WM8993_MIXOUTR_ZC | WM8993_MIXOUT_VU,
+ WM8993_MIXOUTR_ZC | WM8993_MIXOUT_VU);
+
+ snd_soc_add_controls(codec, analogue_snd_controls,
+ ARRAY_SIZE(analogue_snd_controls));
+
+ snd_soc_dapm_new_controls(codec, analogue_dapm_widgets,
+ ARRAY_SIZE(analogue_dapm_widgets));
+ return 0;
+}
+EXPORT_SYMBOL_GPL(wm_hubs_add_analogue_controls);
+
+int wm_hubs_add_analogue_routes(struct snd_soc_codec *codec,
+ int lineout1_diff, int lineout2_diff)
+{
+ snd_soc_dapm_add_routes(codec, analogue_routes,
+ ARRAY_SIZE(analogue_routes));
+
+ if (lineout1_diff)
+ snd_soc_dapm_add_routes(codec,
+ lineout1_diff_routes,
+ ARRAY_SIZE(lineout1_diff_routes));
+ else
+ snd_soc_dapm_add_routes(codec,
+ lineout1_se_routes,
+ ARRAY_SIZE(lineout1_se_routes));
+
+ if (lineout2_diff)
+ snd_soc_dapm_add_routes(codec,
+ lineout2_diff_routes,
+ ARRAY_SIZE(lineout2_diff_routes));
+ else
+ snd_soc_dapm_add_routes(codec,
+ lineout2_se_routes,
+ ARRAY_SIZE(lineout2_se_routes));
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(wm_hubs_add_analogue_routes);
+
+MODULE_DESCRIPTION("Shared support for Wolfson hubs products");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * wm_hubs.h -- WM899x common code
+ *
+ * Copyright 2009 Wolfson Microelectronics plc
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _WM_HUBS_H
+#define _WM_HUBS_H
+
+struct snd_soc_codec;
+
+extern const unsigned int wm_hubs_spkmix_tlv[];
+
+extern int wm_hubs_add_analogue_controls(struct snd_soc_codec *);
+extern int wm_hubs_add_analogue_routes(struct snd_soc_codec *, int, int);
+
+#endif
config SND_DAVINCI_SOC_I2S
tristate
+config SND_DAVINCI_SOC_MCASP
+ tristate
+
config SND_DAVINCI_SOC_EVM
tristate "SoC Audio support for DaVinci DM6446 or DM355 EVM"
depends on SND_DAVINCI_SOC
Say Y if you want to add support for SoC audio on TI
DaVinci DM6446 or DM355 EVM platforms.
+config SND_DM6467_SOC_EVM
+ tristate "SoC Audio support for DaVinci DM6467 EVM"
+ depends on SND_DAVINCI_SOC && MACH_DAVINCI_DM6467_EVM
+ select SND_DAVINCI_SOC_MCASP
+ select SND_SOC_TLV320AIC3X
+ select SND_SOC_SPDIF
+
+ help
+ Say Y if you want to add support for SoC audio on TI
+
config SND_DAVINCI_SOC_SFFSDR
tristate "SoC Audio support for SFFSDR"
depends on SND_DAVINCI_SOC && MACH_SFFSDR
help
Say Y if you want to add support for SoC audio on
Lyrtech SFFSDR board.
+
+config SND_DA830_SOC_EVM
+ tristate "SoC Audio support for DA830/OMAP-L137 EVM"
+ depends on SND_DAVINCI_SOC && MACH_DAVINCI_DA830_EVM
+ select SND_DAVINCI_SOC_MCASP
+ select SND_SOC_TLV320AIC3X
+
+ help
+ Say Y if you want to add support for SoC audio on TI
+ DA830/OMAP-L137 EVM
+
+config SND_DA850_SOC_EVM
+ tristate "SoC Audio support for DA850/OMAP-L138 EVM"
+ depends on SND_DAVINCI_SOC && MACH_DAVINCI_DA850_EVM
+ select SND_DAVINCI_SOC_MCASP
+ select SND_SOC_TLV320AIC3X
+ help
+ Say Y if you want to add support for SoC audio on TI
+ DA850/OMAP-L138 EVM
+
# DAVINCI Platform Support
snd-soc-davinci-objs := davinci-pcm.o
snd-soc-davinci-i2s-objs := davinci-i2s.o
+snd-soc-davinci-mcasp-objs:= davinci-mcasp.o
obj-$(CONFIG_SND_DAVINCI_SOC) += snd-soc-davinci.o
obj-$(CONFIG_SND_DAVINCI_SOC_I2S) += snd-soc-davinci-i2s.o
+obj-$(CONFIG_SND_DAVINCI_SOC_MCASP) += snd-soc-davinci-mcasp.o
# DAVINCI Machine Support
snd-soc-evm-objs := davinci-evm.o
snd-soc-sffsdr-objs := davinci-sffsdr.o
obj-$(CONFIG_SND_DAVINCI_SOC_EVM) += snd-soc-evm.o
+obj-$(CONFIG_SND_DM6467_SOC_EVM) += snd-soc-evm.o
+obj-$(CONFIG_SND_DA830_SOC_EVM) += snd-soc-evm.o
+obj-$(CONFIG_SND_DA850_SOC_EVM) += snd-soc-evm.o
obj-$(CONFIG_SND_DAVINCI_SOC_SFFSDR) += snd-soc-sffsdr.o
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/i2c.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
#include <mach/mux.h>
#include "../codecs/tlv320aic3x.h"
+#include "../codecs/spdif_transciever.h"
#include "davinci-pcm.h"
#include "davinci-i2s.h"
-
+#include "davinci-mcasp.h"
#define AUDIO_FORMAT (SND_SOC_DAIFMT_DSP_B | \
SND_SOC_DAIFMT_CBM_CFM | SND_SOC_DAIFMT_IB_NF)
unsigned sysclk;
/* ASP1 on DM355 EVM is clocked by an external oscillator */
- if (machine_is_davinci_dm355_evm())
+ if (machine_is_davinci_dm355_evm() || machine_is_davinci_dm6467_evm())
sysclk = 27000000;
/* ASP0 in DM6446 EVM is clocked by U55, as configured by
else if (machine_is_davinci_evm())
sysclk = 12288000;
+ else if (machine_is_davinci_da830_evm() ||
+ machine_is_davinci_da850_evm())
+ sysclk = 24576000;
+
else
return -EINVAL;
.ops = &evm_ops,
};
+static struct snd_soc_dai_link dm6467_evm_dai[] = {
+ {
+ .name = "TLV320AIC3X",
+ .stream_name = "AIC3X",
+ .cpu_dai = &davinci_mcasp_dai[DAVINCI_MCASP_I2S_DAI],
+ .codec_dai = &aic3x_dai,
+ .init = evm_aic3x_init,
+ .ops = &evm_ops,
+ },
+ {
+ .name = "McASP",
+ .stream_name = "spdif",
+ .cpu_dai = &davinci_mcasp_dai[DAVINCI_MCASP_DIT_DAI],
+ .codec_dai = &dit_stub_dai,
+ .ops = &evm_ops,
+ },
+};
+static struct snd_soc_dai_link da8xx_evm_dai = {
+ .name = "TLV320AIC3X",
+ .stream_name = "AIC3X",
+ .cpu_dai = &davinci_mcasp_dai[DAVINCI_MCASP_I2S_DAI],
+ .codec_dai = &aic3x_dai,
+ .init = evm_aic3x_init,
+ .ops = &evm_ops,
+};
+
/* davinci-evm audio machine driver */
static struct snd_soc_card snd_soc_card_evm = {
.name = "DaVinci EVM",
.num_links = 1,
};
-/* evm audio private data */
-static struct aic3x_setup_data evm_aic3x_setup = {
- .i2c_bus = 1,
- .i2c_address = 0x1b,
+/* davinci dm6467 evm audio machine driver */
+static struct snd_soc_card dm6467_snd_soc_card_evm = {
+ .name = "DaVinci DM6467 EVM",
+ .platform = &davinci_soc_platform,
+ .dai_link = dm6467_evm_dai,
+ .num_links = ARRAY_SIZE(dm6467_evm_dai),
};
+static struct snd_soc_card da830_snd_soc_card = {
+ .name = "DA830/OMAP-L137 EVM",
+ .dai_link = &da8xx_evm_dai,
+ .platform = &davinci_soc_platform,
+ .num_links = 1,
+};
+
+static struct snd_soc_card da850_snd_soc_card = {
+ .name = "DA850/OMAP-L138 EVM",
+ .dai_link = &da8xx_evm_dai,
+ .platform = &davinci_soc_platform,
+ .num_links = 1,
+};
+
+static struct aic3x_setup_data aic3x_setup;
+
/* evm audio subsystem */
static struct snd_soc_device evm_snd_devdata = {
.card = &snd_soc_card_evm,
.codec_dev = &soc_codec_dev_aic3x,
- .codec_data = &evm_aic3x_setup,
-};
-
-/* DM6446 EVM uses ASP0; line-out is a pair of RCA jacks */
-static struct resource evm_snd_resources[] = {
- {
- .start = DAVINCI_ASP0_BASE,
- .end = DAVINCI_ASP0_BASE + SZ_8K - 1,
- .flags = IORESOURCE_MEM,
- },
+ .codec_data = &aic3x_setup,
};
-static struct evm_snd_platform_data evm_snd_data = {
- .tx_dma_ch = DAVINCI_DMA_ASP0_TX,
- .rx_dma_ch = DAVINCI_DMA_ASP0_RX,
+/* evm audio subsystem */
+static struct snd_soc_device dm6467_evm_snd_devdata = {
+ .card = &dm6467_snd_soc_card_evm,
+ .codec_dev = &soc_codec_dev_aic3x,
+ .codec_data = &aic3x_setup,
};
-/* DM335 EVM uses ASP1; line-out is a stereo mini-jack */
-static struct resource dm335evm_snd_resources[] = {
- {
- .start = DAVINCI_ASP1_BASE,
- .end = DAVINCI_ASP1_BASE + SZ_8K - 1,
- .flags = IORESOURCE_MEM,
- },
+/* evm audio subsystem */
+static struct snd_soc_device da830_evm_snd_devdata = {
+ .card = &da830_snd_soc_card,
+ .codec_dev = &soc_codec_dev_aic3x,
+ .codec_data = &aic3x_setup,
};
-static struct evm_snd_platform_data dm335evm_snd_data = {
- .tx_dma_ch = DAVINCI_DMA_ASP1_TX,
- .rx_dma_ch = DAVINCI_DMA_ASP1_RX,
+static struct snd_soc_device da850_evm_snd_devdata = {
+ .card = &da850_snd_soc_card,
+ .codec_dev = &soc_codec_dev_aic3x,
+ .codec_data = &aic3x_setup,
};
static struct platform_device *evm_snd_device;
static int __init evm_init(void)
{
- struct resource *resources;
- unsigned num_resources;
- struct evm_snd_platform_data *data;
+ struct snd_soc_device *evm_snd_dev_data;
int index;
int ret;
if (machine_is_davinci_evm()) {
- davinci_cfg_reg(DM644X_MCBSP);
-
- resources = evm_snd_resources;
- num_resources = ARRAY_SIZE(evm_snd_resources);
- data = &evm_snd_data;
+ evm_snd_dev_data = &evm_snd_devdata;
index = 0;
} else if (machine_is_davinci_dm355_evm()) {
- /* we don't use ASP1 IRQs, or we'd need to mux them ... */
- davinci_cfg_reg(DM355_EVT8_ASP1_TX);
- davinci_cfg_reg(DM355_EVT9_ASP1_RX);
-
- resources = dm335evm_snd_resources;
- num_resources = ARRAY_SIZE(dm335evm_snd_resources);
- data = &dm335evm_snd_data;
+ evm_snd_dev_data = &evm_snd_devdata;
+ index = 1;
+ } else if (machine_is_davinci_dm6467_evm()) {
+ evm_snd_dev_data = &dm6467_evm_snd_devdata;
+ index = 0;
+ } else if (machine_is_davinci_da830_evm()) {
+ evm_snd_dev_data = &da830_evm_snd_devdata;
index = 1;
+ } else if (machine_is_davinci_da850_evm()) {
+ evm_snd_dev_data = &da850_evm_snd_devdata;
+ index = 0;
} else
return -EINVAL;
if (!evm_snd_device)
return -ENOMEM;
- platform_set_drvdata(evm_snd_device, &evm_snd_devdata);
- evm_snd_devdata.dev = &evm_snd_device->dev;
- platform_device_add_data(evm_snd_device, data, sizeof(*data));
-
- ret = platform_device_add_resources(evm_snd_device, resources,
- num_resources);
- if (ret) {
- platform_device_put(evm_snd_device);
- return ret;
- }
-
+ platform_set_drvdata(evm_snd_device, evm_snd_dev_data);
+ evm_snd_dev_data->dev = &evm_snd_device->dev;
ret = platform_device_add(evm_snd_device);
if (ret)
platform_device_put(evm_snd_device);
#include <sound/initval.h>
#include <sound/soc.h>
+#include <mach/asp.h>
+
#include "davinci-pcm.h"
#define DAVINCI_MCBSP_RCR_RWDLEN1(v) ((v) << 5)
#define DAVINCI_MCBSP_RCR_RFRLEN1(v) ((v) << 8)
#define DAVINCI_MCBSP_RCR_RDATDLY(v) ((v) << 16)
+#define DAVINCI_MCBSP_RCR_RFIG (1 << 18)
#define DAVINCI_MCBSP_RCR_RWDLEN2(v) ((v) << 21)
#define DAVINCI_MCBSP_XCR_XWDLEN1(v) ((v) << 5)
#define DAVINCI_MCBSP_PCR_FSRM (1 << 10)
#define DAVINCI_MCBSP_PCR_FSXM (1 << 11)
-#define MOD_REG_BIT(val, mask, set) do { \
- if (set) { \
- val |= mask; \
- } else { \
- val &= ~mask; \
- } \
-} while (0)
-
enum {
DAVINCI_MCBSP_WORD_8 = 0,
DAVINCI_MCBSP_WORD_12,
struct davinci_mcbsp_dev {
void __iomem *base;
+#define MOD_DSP_A 0
+#define MOD_DSP_B 1
+ int mode;
+ u32 pcr;
struct clk *clk;
struct davinci_pcm_dma_params *dma_params[2];
};
return __raw_readl(dev->base + reg);
}
-static void davinci_mcbsp_start(struct snd_pcm_substream *substream)
+static void toggle_clock(struct davinci_mcbsp_dev *dev, int playback)
+{
+ u32 m = playback ? DAVINCI_MCBSP_PCR_CLKXP : DAVINCI_MCBSP_PCR_CLKRP;
+ /* The clock needs to toggle to complete reset.
+ * So, fake it by toggling the clk polarity.
+ */
+ davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_PCR_REG, dev->pcr ^ m);
+ davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_PCR_REG, dev->pcr);
+}
+
+static void davinci_mcbsp_start(struct davinci_mcbsp_dev *dev,
+ struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct davinci_mcbsp_dev *dev = rtd->dai->cpu_dai->private_data;
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_platform *platform = socdev->card->platform;
- u32 w;
- int ret;
-
- /* Start the sample generator and enable transmitter/receiver */
- w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG);
- MOD_REG_BIT(w, DAVINCI_MCBSP_SPCR_GRST, 1);
- davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, w);
+ int playback = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK);
+ u32 spcr;
+ u32 mask = playback ? DAVINCI_MCBSP_SPCR_XRST : DAVINCI_MCBSP_SPCR_RRST;
+ spcr = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG);
+ if (spcr & mask) {
+ /* start off disabled */
+ davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG,
+ spcr & ~mask);
+ toggle_clock(dev, playback);
+ }
+ if (dev->pcr & (DAVINCI_MCBSP_PCR_FSXM | DAVINCI_MCBSP_PCR_FSRM |
+ DAVINCI_MCBSP_PCR_CLKXM | DAVINCI_MCBSP_PCR_CLKRM)) {
+ /* Start the sample generator */
+ spcr |= DAVINCI_MCBSP_SPCR_GRST;
+ davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, spcr);
+ }
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ if (playback) {
/* Stop the DMA to avoid data loss */
/* while the transmitter is out of reset to handle XSYNCERR */
if (platform->pcm_ops->trigger) {
- ret = platform->pcm_ops->trigger(substream,
+ int ret = platform->pcm_ops->trigger(substream,
SNDRV_PCM_TRIGGER_STOP);
if (ret < 0)
printk(KERN_DEBUG "Playback DMA stop failed\n");
}
/* Enable the transmitter */
- w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG);
- MOD_REG_BIT(w, DAVINCI_MCBSP_SPCR_XRST, 1);
- davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, w);
+ spcr = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG);
+ spcr |= DAVINCI_MCBSP_SPCR_XRST;
+ davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, spcr);
/* wait for any unexpected frame sync error to occur */
udelay(100);
/* Disable the transmitter to clear any outstanding XSYNCERR */
- w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG);
- MOD_REG_BIT(w, DAVINCI_MCBSP_SPCR_XRST, 0);
- davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, w);
+ spcr = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG);
+ spcr &= ~DAVINCI_MCBSP_SPCR_XRST;
+ davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, spcr);
+ toggle_clock(dev, playback);
/* Restart the DMA */
if (platform->pcm_ops->trigger) {
- ret = platform->pcm_ops->trigger(substream,
+ int ret = platform->pcm_ops->trigger(substream,
SNDRV_PCM_TRIGGER_START);
if (ret < 0)
printk(KERN_DEBUG "Playback DMA start failed\n");
}
- /* Enable the transmitter */
- w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG);
- MOD_REG_BIT(w, DAVINCI_MCBSP_SPCR_XRST, 1);
- davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, w);
-
- } else {
-
- /* Enable the reciever */
- w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG);
- MOD_REG_BIT(w, DAVINCI_MCBSP_SPCR_RRST, 1);
- davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, w);
}
+ /* Enable transmitter or receiver */
+ spcr = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG);
+ spcr |= mask;
- /* Start frame sync */
- w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG);
- MOD_REG_BIT(w, DAVINCI_MCBSP_SPCR_FRST, 1);
- davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, w);
+ if (dev->pcr & (DAVINCI_MCBSP_PCR_FSXM | DAVINCI_MCBSP_PCR_FSRM)) {
+ /* Start frame sync */
+ spcr |= DAVINCI_MCBSP_SPCR_FRST;
+ }
+ davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, spcr);
}
-static void davinci_mcbsp_stop(struct snd_pcm_substream *substream)
+static void davinci_mcbsp_stop(struct davinci_mcbsp_dev *dev, int playback)
{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct davinci_mcbsp_dev *dev = rtd->dai->cpu_dai->private_data;
- u32 w;
+ u32 spcr;
/* Reset transmitter/receiver and sample rate/frame sync generators */
- w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG);
- MOD_REG_BIT(w, DAVINCI_MCBSP_SPCR_GRST |
- DAVINCI_MCBSP_SPCR_FRST, 0);
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- MOD_REG_BIT(w, DAVINCI_MCBSP_SPCR_XRST, 0);
- else
- MOD_REG_BIT(w, DAVINCI_MCBSP_SPCR_RRST, 0);
- davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, w);
+ spcr = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG);
+ spcr &= ~(DAVINCI_MCBSP_SPCR_GRST | DAVINCI_MCBSP_SPCR_FRST);
+ spcr &= playback ? ~DAVINCI_MCBSP_SPCR_XRST : ~DAVINCI_MCBSP_SPCR_RRST;
+ davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, spcr);
+ toggle_clock(dev, playback);
}
static int davinci_i2s_startup(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
+ struct snd_soc_dai *cpu_dai)
{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
- struct davinci_mcbsp_dev *dev = rtd->dai->cpu_dai->private_data;
-
+ struct davinci_mcbsp_dev *dev = cpu_dai->private_data;
cpu_dai->dma_data = dev->dma_params[substream->stream];
-
return 0;
}
struct davinci_mcbsp_dev *dev = cpu_dai->private_data;
unsigned int pcr;
unsigned int srgr;
- unsigned int rcr;
- unsigned int xcr;
srgr = DAVINCI_MCBSP_SRGR_FSGM |
DAVINCI_MCBSP_SRGR_FPER(DEFAULT_BITPERSAMPLE * 2 - 1) |
DAVINCI_MCBSP_SRGR_FWID(DEFAULT_BITPERSAMPLE - 1);
+ /* set master/slave audio interface */
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBS_CFS:
/* cpu is master */
return -EINVAL;
}
- rcr = DAVINCI_MCBSP_RCR_RFRLEN1(1);
- xcr = DAVINCI_MCBSP_XCR_XFIG | DAVINCI_MCBSP_XCR_XFRLEN1(1);
+ /* interface format */
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
- case SND_SOC_DAIFMT_DSP_B:
- break;
case SND_SOC_DAIFMT_I2S:
/* Davinci doesn't support TRUE I2S, but some codecs will have
* the left and right channels contiguous. This allows
*/
fmt ^= SND_SOC_DAIFMT_NB_IF;
case SND_SOC_DAIFMT_DSP_A:
- rcr |= DAVINCI_MCBSP_RCR_RDATDLY(1);
- xcr |= DAVINCI_MCBSP_XCR_XDATDLY(1);
+ dev->mode = MOD_DSP_A;
+ break;
+ case SND_SOC_DAIFMT_DSP_B:
+ dev->mode = MOD_DSP_B;
break;
default:
printk(KERN_ERR "%s:bad format\n", __func__);
return -EINVAL;
}
davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SRGR_REG, srgr);
+ dev->pcr = pcr;
davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_PCR_REG, pcr);
- davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_RCR_REG, rcr);
- davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_XCR_REG, xcr);
return 0;
}
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct davinci_pcm_dma_params *dma_params = rtd->dai->cpu_dai->dma_data;
- struct davinci_mcbsp_dev *dev = rtd->dai->cpu_dai->private_data;
+ struct davinci_pcm_dma_params *dma_params = dai->dma_data;
+ struct davinci_mcbsp_dev *dev = dai->private_data;
struct snd_interval *i = NULL;
int mcbsp_word_length;
- u32 w;
+ unsigned int rcr, xcr, srgr;
+ u32 spcr;
/* general line settings */
- w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG);
+ spcr = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG);
if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
- w |= DAVINCI_MCBSP_SPCR_RINTM(3) | DAVINCI_MCBSP_SPCR_FREE;
- davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, w);
+ spcr |= DAVINCI_MCBSP_SPCR_RINTM(3) | DAVINCI_MCBSP_SPCR_FREE;
+ davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, spcr);
} else {
- w |= DAVINCI_MCBSP_SPCR_XINTM(3) | DAVINCI_MCBSP_SPCR_FREE;
- davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, w);
+ spcr |= DAVINCI_MCBSP_SPCR_XINTM(3) | DAVINCI_MCBSP_SPCR_FREE;
+ davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, spcr);
}
i = hw_param_interval(params, SNDRV_PCM_HW_PARAM_SAMPLE_BITS);
- w = DAVINCI_MCBSP_SRGR_FSGM;
- MOD_REG_BIT(w, DAVINCI_MCBSP_SRGR_FWID(snd_interval_value(i) - 1), 1);
+ srgr = DAVINCI_MCBSP_SRGR_FSGM;
+ srgr |= DAVINCI_MCBSP_SRGR_FWID(snd_interval_value(i) - 1);
i = hw_param_interval(params, SNDRV_PCM_HW_PARAM_FRAME_BITS);
- MOD_REG_BIT(w, DAVINCI_MCBSP_SRGR_FPER(snd_interval_value(i) - 1), 1);
- davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SRGR_REG, w);
+ srgr |= DAVINCI_MCBSP_SRGR_FPER(snd_interval_value(i) - 1);
+ davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SRGR_REG, srgr);
+ rcr = DAVINCI_MCBSP_RCR_RFIG;
+ xcr = DAVINCI_MCBSP_XCR_XFIG;
+ if (dev->mode == MOD_DSP_B) {
+ rcr |= DAVINCI_MCBSP_RCR_RDATDLY(0);
+ xcr |= DAVINCI_MCBSP_XCR_XDATDLY(0);
+ } else {
+ rcr |= DAVINCI_MCBSP_RCR_RDATDLY(1);
+ xcr |= DAVINCI_MCBSP_XCR_XDATDLY(1);
+ }
/* Determine xfer data type */
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S8:
return -EINVAL;
}
- if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
- w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_RCR_REG);
- MOD_REG_BIT(w, DAVINCI_MCBSP_RCR_RWDLEN1(mcbsp_word_length) |
- DAVINCI_MCBSP_RCR_RWDLEN2(mcbsp_word_length), 1);
- davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_RCR_REG, w);
+ dma_params->acnt = dma_params->data_type;
+ rcr |= DAVINCI_MCBSP_RCR_RFRLEN1(1);
+ xcr |= DAVINCI_MCBSP_XCR_XFRLEN1(1);
- } else {
- w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_XCR_REG);
- MOD_REG_BIT(w, DAVINCI_MCBSP_XCR_XWDLEN1(mcbsp_word_length) |
- DAVINCI_MCBSP_XCR_XWDLEN2(mcbsp_word_length), 1);
- davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_XCR_REG, w);
+ rcr |= DAVINCI_MCBSP_RCR_RWDLEN1(mcbsp_word_length) |
+ DAVINCI_MCBSP_RCR_RWDLEN2(mcbsp_word_length);
+ xcr |= DAVINCI_MCBSP_XCR_XWDLEN1(mcbsp_word_length) |
+ DAVINCI_MCBSP_XCR_XWDLEN2(mcbsp_word_length);
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_XCR_REG, xcr);
+ else
+ davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_RCR_REG, rcr);
+ return 0;
+}
+
+static int davinci_i2s_prepare(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct davinci_mcbsp_dev *dev = dai->private_data;
+ int playback = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK);
+ davinci_mcbsp_stop(dev, playback);
+ if ((dev->pcr & DAVINCI_MCBSP_PCR_FSXM) == 0) {
+ /* codec is master */
+ davinci_mcbsp_start(dev, substream);
}
return 0;
}
static int davinci_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
struct snd_soc_dai *dai)
{
+ struct davinci_mcbsp_dev *dev = dai->private_data;
int ret = 0;
+ int playback = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK);
+ if ((dev->pcr & DAVINCI_MCBSP_PCR_FSXM) == 0)
+ return 0; /* return if codec is master */
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- davinci_mcbsp_start(substream);
+ davinci_mcbsp_start(dev, substream);
break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- davinci_mcbsp_stop(substream);
+ davinci_mcbsp_stop(dev, playback);
break;
default:
ret = -EINVAL;
}
-
return ret;
}
-static int davinci_i2s_probe(struct platform_device *pdev,
- struct snd_soc_dai *dai)
+static void davinci_i2s_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct davinci_mcbsp_dev *dev = dai->private_data;
+ int playback = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK);
+ davinci_mcbsp_stop(dev, playback);
+}
+
+#define DAVINCI_I2S_RATES SNDRV_PCM_RATE_8000_96000
+
+static struct snd_soc_dai_ops davinci_i2s_dai_ops = {
+ .startup = davinci_i2s_startup,
+ .shutdown = davinci_i2s_shutdown,
+ .prepare = davinci_i2s_prepare,
+ .trigger = davinci_i2s_trigger,
+ .hw_params = davinci_i2s_hw_params,
+ .set_fmt = davinci_i2s_set_dai_fmt,
+
+};
+
+struct snd_soc_dai davinci_i2s_dai = {
+ .name = "davinci-i2s",
+ .id = 0,
+ .playback = {
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = DAVINCI_I2S_RATES,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,},
+ .capture = {
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = DAVINCI_I2S_RATES,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,},
+ .ops = &davinci_i2s_dai_ops,
+
+};
+EXPORT_SYMBOL_GPL(davinci_i2s_dai);
+
+static int davinci_i2s_probe(struct platform_device *pdev)
{
- struct snd_soc_device *socdev = platform_get_drvdata(pdev);
- struct snd_soc_card *card = socdev->card;
- struct snd_soc_dai *cpu_dai = card->dai_link->cpu_dai;
+ struct snd_platform_data *pdata = pdev->dev.platform_data;
struct davinci_mcbsp_dev *dev;
- struct resource *mem, *ioarea;
- struct evm_snd_platform_data *pdata;
+ struct resource *mem, *ioarea, *res;
int ret;
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
goto err_release_region;
}
- cpu_dai->private_data = dev;
-
dev->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(dev->clk)) {
ret = -ENODEV;
clk_enable(dev->clk);
dev->base = (void __iomem *)IO_ADDRESS(mem->start);
- pdata = pdev->dev.platform_data;
dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK] = &davinci_i2s_pcm_out;
- dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK]->channel = pdata->tx_dma_ch;
dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK]->dma_addr =
(dma_addr_t)(io_v2p(dev->base) + DAVINCI_MCBSP_DXR_REG);
dev->dma_params[SNDRV_PCM_STREAM_CAPTURE] = &davinci_i2s_pcm_in;
- dev->dma_params[SNDRV_PCM_STREAM_CAPTURE]->channel = pdata->rx_dma_ch;
dev->dma_params[SNDRV_PCM_STREAM_CAPTURE]->dma_addr =
(dma_addr_t)(io_v2p(dev->base) + DAVINCI_MCBSP_DRR_REG);
+ /* first TX, then RX */
+ res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "no DMA resource\n");
+ ret = -ENXIO;
+ goto err_free_mem;
+ }
+ dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK]->channel = res->start;
+
+ res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+ if (!res) {
+ dev_err(&pdev->dev, "no DMA resource\n");
+ ret = -ENXIO;
+ goto err_free_mem;
+ }
+ dev->dma_params[SNDRV_PCM_STREAM_CAPTURE]->channel = res->start;
+
+ davinci_i2s_dai.private_data = dev;
+ ret = snd_soc_register_dai(&davinci_i2s_dai);
+ if (ret != 0)
+ goto err_free_mem;
+
return 0;
err_free_mem:
return ret;
}
-static void davinci_i2s_remove(struct platform_device *pdev,
- struct snd_soc_dai *dai)
+static int davinci_i2s_remove(struct platform_device *pdev)
{
- struct snd_soc_device *socdev = platform_get_drvdata(pdev);
- struct snd_soc_card *card = socdev->card;
- struct snd_soc_dai *cpu_dai = card->dai_link->cpu_dai;
- struct davinci_mcbsp_dev *dev = cpu_dai->private_data;
+ struct davinci_mcbsp_dev *dev = davinci_i2s_dai.private_data;
struct resource *mem;
+ snd_soc_unregister_dai(&davinci_i2s_dai);
clk_disable(dev->clk);
clk_put(dev->clk);
dev->clk = NULL;
-
kfree(dev);
-
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
release_mem_region(mem->start, (mem->end - mem->start) + 1);
-}
-#define DAVINCI_I2S_RATES SNDRV_PCM_RATE_8000_96000
-
-static struct snd_soc_dai_ops davinci_i2s_dai_ops = {
- .startup = davinci_i2s_startup,
- .trigger = davinci_i2s_trigger,
- .hw_params = davinci_i2s_hw_params,
- .set_fmt = davinci_i2s_set_dai_fmt,
-};
+ return 0;
+}
-struct snd_soc_dai davinci_i2s_dai = {
- .name = "davinci-i2s",
- .id = 0,
- .probe = davinci_i2s_probe,
- .remove = davinci_i2s_remove,
- .playback = {
- .channels_min = 2,
- .channels_max = 2,
- .rates = DAVINCI_I2S_RATES,
- .formats = SNDRV_PCM_FMTBIT_S16_LE,},
- .capture = {
- .channels_min = 2,
- .channels_max = 2,
- .rates = DAVINCI_I2S_RATES,
- .formats = SNDRV_PCM_FMTBIT_S16_LE,},
- .ops = &davinci_i2s_dai_ops,
+static struct platform_driver davinci_mcbsp_driver = {
+ .probe = davinci_i2s_probe,
+ .remove = davinci_i2s_remove,
+ .driver = {
+ .name = "davinci-asp",
+ .owner = THIS_MODULE,
+ },
};
-EXPORT_SYMBOL_GPL(davinci_i2s_dai);
static int __init davinci_i2s_init(void)
{
- return snd_soc_register_dai(&davinci_i2s_dai);
+ return platform_driver_register(&davinci_mcbsp_driver);
}
module_init(davinci_i2s_init);
static void __exit davinci_i2s_exit(void)
{
- snd_soc_unregister_dai(&davinci_i2s_dai);
+ platform_driver_unregister(&davinci_mcbsp_driver);
}
module_exit(davinci_i2s_exit);
--- /dev/null
+/*
+ * ALSA SoC McASP Audio Layer for TI DAVINCI processor
+ *
+ * Multi-channel Audio Serial Port Driver
+ *
+ * Author: Nirmal Pandey <n-pandey@ti.com>,
+ * Suresh Rajashekara <suresh.r@ti.com>
+ * Steve Chen <schen@.mvista.com>
+ *
+ * Copyright: (C) 2009 MontaVista Software, Inc., <source@mvista.com>
+ * Copyright: (C) 2009 Texas Instruments, India
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+
+#include "davinci-pcm.h"
+#include "davinci-mcasp.h"
+
+/*
+ * McASP register definitions
+ */
+#define DAVINCI_MCASP_PID_REG 0x00
+#define DAVINCI_MCASP_PWREMUMGT_REG 0x04
+
+#define DAVINCI_MCASP_PFUNC_REG 0x10
+#define DAVINCI_MCASP_PDIR_REG 0x14
+#define DAVINCI_MCASP_PDOUT_REG 0x18
+#define DAVINCI_MCASP_PDSET_REG 0x1c
+
+#define DAVINCI_MCASP_PDCLR_REG 0x20
+
+#define DAVINCI_MCASP_TLGC_REG 0x30
+#define DAVINCI_MCASP_TLMR_REG 0x34
+
+#define DAVINCI_MCASP_GBLCTL_REG 0x44
+#define DAVINCI_MCASP_AMUTE_REG 0x48
+#define DAVINCI_MCASP_LBCTL_REG 0x4c
+
+#define DAVINCI_MCASP_TXDITCTL_REG 0x50
+
+#define DAVINCI_MCASP_GBLCTLR_REG 0x60
+#define DAVINCI_MCASP_RXMASK_REG 0x64
+#define DAVINCI_MCASP_RXFMT_REG 0x68
+#define DAVINCI_MCASP_RXFMCTL_REG 0x6c
+
+#define DAVINCI_MCASP_ACLKRCTL_REG 0x70
+#define DAVINCI_MCASP_AHCLKRCTL_REG 0x74
+#define DAVINCI_MCASP_RXTDM_REG 0x78
+#define DAVINCI_MCASP_EVTCTLR_REG 0x7c
+
+#define DAVINCI_MCASP_RXSTAT_REG 0x80
+#define DAVINCI_MCASP_RXTDMSLOT_REG 0x84
+#define DAVINCI_MCASP_RXCLKCHK_REG 0x88
+#define DAVINCI_MCASP_REVTCTL_REG 0x8c
+
+#define DAVINCI_MCASP_GBLCTLX_REG 0xa0
+#define DAVINCI_MCASP_TXMASK_REG 0xa4
+#define DAVINCI_MCASP_TXFMT_REG 0xa8
+#define DAVINCI_MCASP_TXFMCTL_REG 0xac
+
+#define DAVINCI_MCASP_ACLKXCTL_REG 0xb0
+#define DAVINCI_MCASP_AHCLKXCTL_REG 0xb4
+#define DAVINCI_MCASP_TXTDM_REG 0xb8
+#define DAVINCI_MCASP_EVTCTLX_REG 0xbc
+
+#define DAVINCI_MCASP_TXSTAT_REG 0xc0
+#define DAVINCI_MCASP_TXTDMSLOT_REG 0xc4
+#define DAVINCI_MCASP_TXCLKCHK_REG 0xc8
+#define DAVINCI_MCASP_XEVTCTL_REG 0xcc
+
+/* Left(even TDM Slot) Channel Status Register File */
+#define DAVINCI_MCASP_DITCSRA_REG 0x100
+/* Right(odd TDM slot) Channel Status Register File */
+#define DAVINCI_MCASP_DITCSRB_REG 0x118
+/* Left(even TDM slot) User Data Register File */
+#define DAVINCI_MCASP_DITUDRA_REG 0x130
+/* Right(odd TDM Slot) User Data Register File */
+#define DAVINCI_MCASP_DITUDRB_REG 0x148
+
+/* Serializer n Control Register */
+#define DAVINCI_MCASP_XRSRCTL_BASE_REG 0x180
+#define DAVINCI_MCASP_XRSRCTL_REG(n) (DAVINCI_MCASP_XRSRCTL_BASE_REG + \
+ (n << 2))
+
+/* Transmit Buffer for Serializer n */
+#define DAVINCI_MCASP_TXBUF_REG 0x200
+/* Receive Buffer for Serializer n */
+#define DAVINCI_MCASP_RXBUF_REG 0x280
+
+/* McASP FIFO Registers */
+#define DAVINCI_MCASP_WFIFOCTL (0x1010)
+#define DAVINCI_MCASP_WFIFOSTS (0x1014)
+#define DAVINCI_MCASP_RFIFOCTL (0x1018)
+#define DAVINCI_MCASP_RFIFOSTS (0x101C)
+
+/*
+ * DAVINCI_MCASP_PWREMUMGT_REG - Power Down and Emulation Management
+ * Register Bits
+ */
+#define MCASP_FREE BIT(0)
+#define MCASP_SOFT BIT(1)
+
+/*
+ * DAVINCI_MCASP_PFUNC_REG - Pin Function / GPIO Enable Register Bits
+ */
+#define AXR(n) (1<<n)
+#define PFUNC_AMUTE BIT(25)
+#define ACLKX BIT(26)
+#define AHCLKX BIT(27)
+#define AFSX BIT(28)
+#define ACLKR BIT(29)
+#define AHCLKR BIT(30)
+#define AFSR BIT(31)
+
+/*
+ * DAVINCI_MCASP_PDIR_REG - Pin Direction Register Bits
+ */
+#define AXR(n) (1<<n)
+#define PDIR_AMUTE BIT(25)
+#define ACLKX BIT(26)
+#define AHCLKX BIT(27)
+#define AFSX BIT(28)
+#define ACLKR BIT(29)
+#define AHCLKR BIT(30)
+#define AFSR BIT(31)
+
+/*
+ * DAVINCI_MCASP_TXDITCTL_REG - Transmit DIT Control Register Bits
+ */
+#define DITEN BIT(0) /* Transmit DIT mode enable/disable */
+#define VA BIT(2)
+#define VB BIT(3)
+
+/*
+ * DAVINCI_MCASP_TXFMT_REG - Transmit Bitstream Format Register Bits
+ */
+#define TXROT(val) (val)
+#define TXSEL BIT(3)
+#define TXSSZ(val) (val<<4)
+#define TXPBIT(val) (val<<8)
+#define TXPAD(val) (val<<13)
+#define TXORD BIT(15)
+#define FSXDLY(val) (val<<16)
+
+/*
+ * DAVINCI_MCASP_RXFMT_REG - Receive Bitstream Format Register Bits
+ */
+#define RXROT(val) (val)
+#define RXSEL BIT(3)
+#define RXSSZ(val) (val<<4)
+#define RXPBIT(val) (val<<8)
+#define RXPAD(val) (val<<13)
+#define RXORD BIT(15)
+#define FSRDLY(val) (val<<16)
+
+/*
+ * DAVINCI_MCASP_TXFMCTL_REG - Transmit Frame Control Register Bits
+ */
+#define FSXPOL BIT(0)
+#define AFSXE BIT(1)
+#define FSXDUR BIT(4)
+#define FSXMOD(val) (val<<7)
+
+/*
+ * DAVINCI_MCASP_RXFMCTL_REG - Receive Frame Control Register Bits
+ */
+#define FSRPOL BIT(0)
+#define AFSRE BIT(1)
+#define FSRDUR BIT(4)
+#define FSRMOD(val) (val<<7)
+
+/*
+ * DAVINCI_MCASP_ACLKXCTL_REG - Transmit Clock Control Register Bits
+ */
+#define ACLKXDIV(val) (val)
+#define ACLKXE BIT(5)
+#define TX_ASYNC BIT(6)
+#define ACLKXPOL BIT(7)
+
+/*
+ * DAVINCI_MCASP_ACLKRCTL_REG Receive Clock Control Register Bits
+ */
+#define ACLKRDIV(val) (val)
+#define ACLKRE BIT(5)
+#define RX_ASYNC BIT(6)
+#define ACLKRPOL BIT(7)
+
+/*
+ * DAVINCI_MCASP_AHCLKXCTL_REG - High Frequency Transmit Clock Control
+ * Register Bits
+ */
+#define AHCLKXDIV(val) (val)
+#define AHCLKXPOL BIT(14)
+#define AHCLKXE BIT(15)
+
+/*
+ * DAVINCI_MCASP_AHCLKRCTL_REG - High Frequency Receive Clock Control
+ * Register Bits
+ */
+#define AHCLKRDIV(val) (val)
+#define AHCLKRPOL BIT(14)
+#define AHCLKRE BIT(15)
+
+/*
+ * DAVINCI_MCASP_XRSRCTL_BASE_REG - Serializer Control Register Bits
+ */
+#define MODE(val) (val)
+#define DISMOD (val)(val<<2)
+#define TXSTATE BIT(4)
+#define RXSTATE BIT(5)
+
+/*
+ * DAVINCI_MCASP_LBCTL_REG - Loop Back Control Register Bits
+ */
+#define LBEN BIT(0)
+#define LBORD BIT(1)
+#define LBGENMODE(val) (val<<2)
+
+/*
+ * DAVINCI_MCASP_TXTDMSLOT_REG - Transmit TDM Slot Register configuration
+ */
+#define TXTDMS(n) (1<<n)
+
+/*
+ * DAVINCI_MCASP_RXTDMSLOT_REG - Receive TDM Slot Register configuration
+ */
+#define RXTDMS(n) (1<<n)
+
+/*
+ * DAVINCI_MCASP_GBLCTL_REG - Global Control Register Bits
+ */
+#define RXCLKRST BIT(0) /* Receiver Clock Divider Reset */
+#define RXHCLKRST BIT(1) /* Receiver High Frequency Clock Divider */
+#define RXSERCLR BIT(2) /* Receiver Serializer Clear */
+#define RXSMRST BIT(3) /* Receiver State Machine Reset */
+#define RXFSRST BIT(4) /* Frame Sync Generator Reset */
+#define TXCLKRST BIT(8) /* Transmitter Clock Divider Reset */
+#define TXHCLKRST BIT(9) /* Transmitter High Frequency Clock Divider*/
+#define TXSERCLR BIT(10) /* Transmit Serializer Clear */
+#define TXSMRST BIT(11) /* Transmitter State Machine Reset */
+#define TXFSRST BIT(12) /* Frame Sync Generator Reset */
+
+/*
+ * DAVINCI_MCASP_AMUTE_REG - Mute Control Register Bits
+ */
+#define MUTENA(val) (val)
+#define MUTEINPOL BIT(2)
+#define MUTEINENA BIT(3)
+#define MUTEIN BIT(4)
+#define MUTER BIT(5)
+#define MUTEX BIT(6)
+#define MUTEFSR BIT(7)
+#define MUTEFSX BIT(8)
+#define MUTEBADCLKR BIT(9)
+#define MUTEBADCLKX BIT(10)
+#define MUTERXDMAERR BIT(11)
+#define MUTETXDMAERR BIT(12)
+
+/*
+ * DAVINCI_MCASP_REVTCTL_REG - Receiver DMA Event Control Register bits
+ */
+#define RXDATADMADIS BIT(0)
+
+/*
+ * DAVINCI_MCASP_XEVTCTL_REG - Transmitter DMA Event Control Register bits
+ */
+#define TXDATADMADIS BIT(0)
+
+/*
+ * DAVINCI_MCASP_W[R]FIFOCTL - Write/Read FIFO Control Register bits
+ */
+#define FIFO_ENABLE BIT(16)
+#define NUMEVT_MASK (0xFF << 8)
+#define NUMDMA_MASK (0xFF)
+
+#define DAVINCI_MCASP_NUM_SERIALIZER 16
+
+static inline void mcasp_set_bits(void __iomem *reg, u32 val)
+{
+ __raw_writel(__raw_readl(reg) | val, reg);
+}
+
+static inline void mcasp_clr_bits(void __iomem *reg, u32 val)
+{
+ __raw_writel((__raw_readl(reg) & ~(val)), reg);
+}
+
+static inline void mcasp_mod_bits(void __iomem *reg, u32 val, u32 mask)
+{
+ __raw_writel((__raw_readl(reg) & ~mask) | val, reg);
+}
+
+static inline void mcasp_set_reg(void __iomem *reg, u32 val)
+{
+ __raw_writel(val, reg);
+}
+
+static inline u32 mcasp_get_reg(void __iomem *reg)
+{
+ return (unsigned int)__raw_readl(reg);
+}
+
+static inline void mcasp_set_ctl_reg(void __iomem *regs, u32 val)
+{
+ int i = 0;
+
+ mcasp_set_bits(regs, val);
+
+ /* programming GBLCTL needs to read back from GBLCTL and verfiy */
+ /* loop count is to avoid the lock-up */
+ for (i = 0; i < 1000; i++) {
+ if ((mcasp_get_reg(regs) & val) == val)
+ break;
+ }
+
+ if (i == 1000 && ((mcasp_get_reg(regs) & val) != val))
+ printk(KERN_ERR "GBLCTL write error\n");
+}
+
+static int davinci_mcasp_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *cpu_dai)
+{
+ struct davinci_audio_dev *dev = cpu_dai->private_data;
+ cpu_dai->dma_data = dev->dma_params[substream->stream];
+ return 0;
+}
+
+static void mcasp_start_rx(struct davinci_audio_dev *dev)
+{
+ mcasp_set_ctl_reg(dev->base + DAVINCI_MCASP_GBLCTLR_REG, RXHCLKRST);
+ mcasp_set_ctl_reg(dev->base + DAVINCI_MCASP_GBLCTLR_REG, RXCLKRST);
+ mcasp_set_ctl_reg(dev->base + DAVINCI_MCASP_GBLCTLR_REG, RXSERCLR);
+ mcasp_set_reg(dev->base + DAVINCI_MCASP_RXBUF_REG, 0);
+
+ mcasp_set_ctl_reg(dev->base + DAVINCI_MCASP_GBLCTLR_REG, RXSMRST);
+ mcasp_set_ctl_reg(dev->base + DAVINCI_MCASP_GBLCTLR_REG, RXFSRST);
+ mcasp_set_reg(dev->base + DAVINCI_MCASP_RXBUF_REG, 0);
+
+ mcasp_set_ctl_reg(dev->base + DAVINCI_MCASP_GBLCTLR_REG, RXSMRST);
+ mcasp_set_ctl_reg(dev->base + DAVINCI_MCASP_GBLCTLR_REG, RXFSRST);
+}
+
+static void mcasp_start_tx(struct davinci_audio_dev *dev)
+{
+ u8 offset = 0, i;
+ u32 cnt;
+
+ mcasp_set_ctl_reg(dev->base + DAVINCI_MCASP_GBLCTLX_REG, TXHCLKRST);
+ mcasp_set_ctl_reg(dev->base + DAVINCI_MCASP_GBLCTLX_REG, TXCLKRST);
+ mcasp_set_ctl_reg(dev->base + DAVINCI_MCASP_GBLCTLX_REG, TXSERCLR);
+ mcasp_set_reg(dev->base + DAVINCI_MCASP_TXBUF_REG, 0);
+
+ mcasp_set_ctl_reg(dev->base + DAVINCI_MCASP_GBLCTLX_REG, TXSMRST);
+ mcasp_set_ctl_reg(dev->base + DAVINCI_MCASP_GBLCTLX_REG, TXFSRST);
+ mcasp_set_reg(dev->base + DAVINCI_MCASP_TXBUF_REG, 0);
+ for (i = 0; i < dev->num_serializer; i++) {
+ if (dev->serial_dir[i] == TX_MODE) {
+ offset = i;
+ break;
+ }
+ }
+
+ /* wait for TX ready */
+ cnt = 0;
+ while (!(mcasp_get_reg(dev->base + DAVINCI_MCASP_XRSRCTL_REG(offset)) &
+ TXSTATE) && (cnt < 100000))
+ cnt++;
+
+ mcasp_set_reg(dev->base + DAVINCI_MCASP_TXBUF_REG, 0);
+}
+
+static void davinci_mcasp_start(struct davinci_audio_dev *dev, int stream)
+{
+ if (stream == SNDRV_PCM_STREAM_PLAYBACK)
+ mcasp_start_tx(dev);
+ else
+ mcasp_start_rx(dev);
+
+ /* enable FIFO */
+ if (dev->txnumevt)
+ mcasp_set_bits(dev->base + DAVINCI_MCASP_WFIFOCTL, FIFO_ENABLE);
+
+ if (dev->rxnumevt)
+ mcasp_set_bits(dev->base + DAVINCI_MCASP_RFIFOCTL, FIFO_ENABLE);
+}
+
+static void mcasp_stop_rx(struct davinci_audio_dev *dev)
+{
+ mcasp_set_reg(dev->base + DAVINCI_MCASP_GBLCTLR_REG, 0);
+ mcasp_set_reg(dev->base + DAVINCI_MCASP_RXSTAT_REG, 0xFFFFFFFF);
+}
+
+static void mcasp_stop_tx(struct davinci_audio_dev *dev)
+{
+ mcasp_set_reg(dev->base + DAVINCI_MCASP_GBLCTLX_REG, 0);
+ mcasp_set_reg(dev->base + DAVINCI_MCASP_TXSTAT_REG, 0xFFFFFFFF);
+}
+
+static void davinci_mcasp_stop(struct davinci_audio_dev *dev, int stream)
+{
+ if (stream == SNDRV_PCM_STREAM_PLAYBACK)
+ mcasp_stop_tx(dev);
+ else
+ mcasp_stop_rx(dev);
+
+ /* disable FIFO */
+ if (dev->txnumevt)
+ mcasp_clr_bits(dev->base + DAVINCI_MCASP_WFIFOCTL, FIFO_ENABLE);
+
+ if (dev->rxnumevt)
+ mcasp_clr_bits(dev->base + DAVINCI_MCASP_RFIFOCTL, FIFO_ENABLE);
+}
+
+static int davinci_mcasp_set_dai_fmt(struct snd_soc_dai *cpu_dai,
+ unsigned int fmt)
+{
+ struct davinci_audio_dev *dev = cpu_dai->private_data;
+ void __iomem *base = dev->base;
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBS_CFS:
+ /* codec is clock and frame slave */
+ mcasp_set_bits(base + DAVINCI_MCASP_ACLKXCTL_REG, ACLKXE);
+ mcasp_set_bits(base + DAVINCI_MCASP_TXFMCTL_REG, AFSXE);
+
+ mcasp_set_bits(base + DAVINCI_MCASP_ACLKRCTL_REG, ACLKRE);
+ mcasp_set_bits(base + DAVINCI_MCASP_RXFMCTL_REG, AFSRE);
+
+ mcasp_set_bits(base + DAVINCI_MCASP_PDIR_REG, (0x7 << 26));
+ break;
+ case SND_SOC_DAIFMT_CBM_CFS:
+ /* codec is clock master and frame slave */
+ mcasp_set_bits(base + DAVINCI_MCASP_ACLKXCTL_REG, ACLKXE);
+ mcasp_set_bits(base + DAVINCI_MCASP_TXFMCTL_REG, AFSXE);
+
+ mcasp_set_bits(base + DAVINCI_MCASP_ACLKRCTL_REG, ACLKRE);
+ mcasp_set_bits(base + DAVINCI_MCASP_RXFMCTL_REG, AFSRE);
+
+ mcasp_set_bits(base + DAVINCI_MCASP_PDIR_REG, (0x2d << 26));
+ break;
+ case SND_SOC_DAIFMT_CBM_CFM:
+ /* codec is clock and frame master */
+ mcasp_clr_bits(base + DAVINCI_MCASP_ACLKXCTL_REG, ACLKXE);
+ mcasp_clr_bits(base + DAVINCI_MCASP_TXFMCTL_REG, AFSXE);
+
+ mcasp_clr_bits(base + DAVINCI_MCASP_ACLKRCTL_REG, ACLKRE);
+ mcasp_clr_bits(base + DAVINCI_MCASP_RXFMCTL_REG, AFSRE);
+
+ mcasp_clr_bits(base + DAVINCI_MCASP_PDIR_REG, (0x3f << 26));
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_IB_NF:
+ mcasp_clr_bits(base + DAVINCI_MCASP_ACLKXCTL_REG, ACLKXPOL);
+ mcasp_clr_bits(base + DAVINCI_MCASP_TXFMCTL_REG, FSXPOL);
+
+ mcasp_set_bits(base + DAVINCI_MCASP_ACLKRCTL_REG, ACLKRPOL);
+ mcasp_clr_bits(base + DAVINCI_MCASP_RXFMCTL_REG, FSRPOL);
+ break;
+
+ case SND_SOC_DAIFMT_NB_IF:
+ mcasp_set_bits(base + DAVINCI_MCASP_ACLKXCTL_REG, ACLKXPOL);
+ mcasp_set_bits(base + DAVINCI_MCASP_TXFMCTL_REG, FSXPOL);
+
+ mcasp_clr_bits(base + DAVINCI_MCASP_ACLKRCTL_REG, ACLKRPOL);
+ mcasp_set_bits(base + DAVINCI_MCASP_RXFMCTL_REG, FSRPOL);
+ break;
+
+ case SND_SOC_DAIFMT_IB_IF:
+ mcasp_clr_bits(base + DAVINCI_MCASP_ACLKXCTL_REG, ACLKXPOL);
+ mcasp_set_bits(base + DAVINCI_MCASP_TXFMCTL_REG, FSXPOL);
+
+ mcasp_set_bits(base + DAVINCI_MCASP_ACLKRCTL_REG, ACLKRPOL);
+ mcasp_set_bits(base + DAVINCI_MCASP_RXFMCTL_REG, FSRPOL);
+ break;
+
+ case SND_SOC_DAIFMT_NB_NF:
+ mcasp_set_bits(base + DAVINCI_MCASP_ACLKXCTL_REG, ACLKXPOL);
+ mcasp_clr_bits(base + DAVINCI_MCASP_TXFMCTL_REG, FSXPOL);
+
+ mcasp_clr_bits(base + DAVINCI_MCASP_ACLKRCTL_REG, ACLKRPOL);
+ mcasp_clr_bits(base + DAVINCI_MCASP_RXFMCTL_REG, FSRPOL);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int davinci_config_channel_size(struct davinci_audio_dev *dev,
+ int channel_size)
+{
+ u32 fmt = 0;
+
+ switch (channel_size) {
+ case DAVINCI_AUDIO_WORD_8:
+ fmt = 0x03;
+ break;
+
+ case DAVINCI_AUDIO_WORD_12:
+ fmt = 0x05;
+ break;
+
+ case DAVINCI_AUDIO_WORD_16:
+ fmt = 0x07;
+ break;
+
+ case DAVINCI_AUDIO_WORD_20:
+ fmt = 0x09;
+ break;
+
+ case DAVINCI_AUDIO_WORD_24:
+ fmt = 0x0B;
+ break;
+
+ case DAVINCI_AUDIO_WORD_28:
+ fmt = 0x0D;
+ break;
+
+ case DAVINCI_AUDIO_WORD_32:
+ fmt = 0x0F;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ mcasp_mod_bits(dev->base + DAVINCI_MCASP_RXFMT_REG,
+ RXSSZ(fmt), RXSSZ(0x0F));
+ mcasp_mod_bits(dev->base + DAVINCI_MCASP_TXFMT_REG,
+ TXSSZ(fmt), TXSSZ(0x0F));
+ return 0;
+}
+
+static void davinci_hw_common_param(struct davinci_audio_dev *dev, int stream)
+{
+ int i;
+ u8 tx_ser = 0;
+ u8 rx_ser = 0;
+
+ /* Default configuration */
+ mcasp_set_bits(dev->base + DAVINCI_MCASP_PWREMUMGT_REG, MCASP_SOFT);
+
+ /* All PINS as McASP */
+ mcasp_set_reg(dev->base + DAVINCI_MCASP_PFUNC_REG, 0x00000000);
+
+ if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ mcasp_set_reg(dev->base + DAVINCI_MCASP_TXSTAT_REG, 0xFFFFFFFF);
+ mcasp_clr_bits(dev->base + DAVINCI_MCASP_XEVTCTL_REG,
+ TXDATADMADIS);
+ } else {
+ mcasp_set_reg(dev->base + DAVINCI_MCASP_RXSTAT_REG, 0xFFFFFFFF);
+ mcasp_clr_bits(dev->base + DAVINCI_MCASP_REVTCTL_REG,
+ RXDATADMADIS);
+ }
+
+ for (i = 0; i < dev->num_serializer; i++) {
+ mcasp_set_bits(dev->base + DAVINCI_MCASP_XRSRCTL_REG(i),
+ dev->serial_dir[i]);
+ if (dev->serial_dir[i] == TX_MODE) {
+ mcasp_set_bits(dev->base + DAVINCI_MCASP_PDIR_REG,
+ AXR(i));
+ tx_ser++;
+ } else if (dev->serial_dir[i] == RX_MODE) {
+ mcasp_clr_bits(dev->base + DAVINCI_MCASP_PDIR_REG,
+ AXR(i));
+ rx_ser++;
+ }
+ }
+
+ if (dev->txnumevt && stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ if (dev->txnumevt * tx_ser > 64)
+ dev->txnumevt = 1;
+
+ mcasp_mod_bits(dev->base + DAVINCI_MCASP_WFIFOCTL, tx_ser,
+ NUMDMA_MASK);
+ mcasp_mod_bits(dev->base + DAVINCI_MCASP_WFIFOCTL,
+ ((dev->txnumevt * tx_ser) << 8), NUMEVT_MASK);
+ mcasp_set_bits(dev->base + DAVINCI_MCASP_WFIFOCTL, FIFO_ENABLE);
+ }
+
+ if (dev->rxnumevt && stream == SNDRV_PCM_STREAM_CAPTURE) {
+ if (dev->rxnumevt * rx_ser > 64)
+ dev->rxnumevt = 1;
+
+ mcasp_mod_bits(dev->base + DAVINCI_MCASP_RFIFOCTL, rx_ser,
+ NUMDMA_MASK);
+ mcasp_mod_bits(dev->base + DAVINCI_MCASP_RFIFOCTL,
+ ((dev->rxnumevt * rx_ser) << 8), NUMEVT_MASK);
+ mcasp_set_bits(dev->base + DAVINCI_MCASP_RFIFOCTL, FIFO_ENABLE);
+ }
+}
+
+static void davinci_hw_param(struct davinci_audio_dev *dev, int stream)
+{
+ int i, active_slots;
+ u32 mask = 0;
+
+ active_slots = (dev->tdm_slots > 31) ? 32 : dev->tdm_slots;
+ for (i = 0; i < active_slots; i++)
+ mask |= (1 << i);
+
+ mcasp_clr_bits(dev->base + DAVINCI_MCASP_ACLKXCTL_REG, TX_ASYNC);
+
+ if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ /* bit stream is MSB first with no delay */
+ /* DSP_B mode */
+ mcasp_set_bits(dev->base + DAVINCI_MCASP_AHCLKXCTL_REG,
+ AHCLKXE);
+ mcasp_set_reg(dev->base + DAVINCI_MCASP_TXTDM_REG, mask);
+ mcasp_set_bits(dev->base + DAVINCI_MCASP_TXFMT_REG, TXORD);
+
+ if ((dev->tdm_slots >= 2) || (dev->tdm_slots <= 32))
+ mcasp_mod_bits(dev->base + DAVINCI_MCASP_TXFMCTL_REG,
+ FSXMOD(dev->tdm_slots), FSXMOD(0x1FF));
+ else
+ printk(KERN_ERR "playback tdm slot %d not supported\n",
+ dev->tdm_slots);
+
+ mcasp_set_reg(dev->base + DAVINCI_MCASP_TXMASK_REG, 0xFFFFFFFF);
+ mcasp_clr_bits(dev->base + DAVINCI_MCASP_TXFMCTL_REG, FSXDUR);
+ } else {
+ /* bit stream is MSB first with no delay */
+ /* DSP_B mode */
+ mcasp_set_bits(dev->base + DAVINCI_MCASP_RXFMT_REG, RXORD);
+ mcasp_set_bits(dev->base + DAVINCI_MCASP_AHCLKRCTL_REG,
+ AHCLKRE);
+ mcasp_set_reg(dev->base + DAVINCI_MCASP_RXTDM_REG, mask);
+
+ if ((dev->tdm_slots >= 2) || (dev->tdm_slots <= 32))
+ mcasp_mod_bits(dev->base + DAVINCI_MCASP_RXFMCTL_REG,
+ FSRMOD(dev->tdm_slots), FSRMOD(0x1FF));
+ else
+ printk(KERN_ERR "capture tdm slot %d not supported\n",
+ dev->tdm_slots);
+
+ mcasp_set_reg(dev->base + DAVINCI_MCASP_RXMASK_REG, 0xFFFFFFFF);
+ mcasp_clr_bits(dev->base + DAVINCI_MCASP_RXFMCTL_REG, FSRDUR);
+ }
+}
+
+/* S/PDIF */
+static void davinci_hw_dit_param(struct davinci_audio_dev *dev)
+{
+ /* Set the PDIR for Serialiser as output */
+ mcasp_set_bits(dev->base + DAVINCI_MCASP_PDIR_REG, AFSX);
+
+ /* TXMASK for 24 bits */
+ mcasp_set_reg(dev->base + DAVINCI_MCASP_TXMASK_REG, 0x00FFFFFF);
+
+ /* Set the TX format : 24 bit right rotation, 32 bit slot, Pad 0
+ and LSB first */
+ mcasp_set_bits(dev->base + DAVINCI_MCASP_TXFMT_REG,
+ TXROT(6) | TXSSZ(15));
+
+ /* Set TX frame synch : DIT Mode, 1 bit width, internal, rising edge */
+ mcasp_set_reg(dev->base + DAVINCI_MCASP_TXFMCTL_REG,
+ AFSXE | FSXMOD(0x180));
+
+ /* Set the TX tdm : for all the slots */
+ mcasp_set_reg(dev->base + DAVINCI_MCASP_TXTDM_REG, 0xFFFFFFFF);
+
+ /* Set the TX clock controls : div = 1 and internal */
+ mcasp_set_bits(dev->base + DAVINCI_MCASP_ACLKXCTL_REG,
+ ACLKXE | TX_ASYNC);
+
+ mcasp_clr_bits(dev->base + DAVINCI_MCASP_XEVTCTL_REG, TXDATADMADIS);
+
+ /* Only 44100 and 48000 are valid, both have the same setting */
+ mcasp_set_bits(dev->base + DAVINCI_MCASP_AHCLKXCTL_REG, AHCLKXDIV(3));
+
+ /* Enable the DIT */
+ mcasp_set_bits(dev->base + DAVINCI_MCASP_TXDITCTL_REG, DITEN);
+}
+
+static int davinci_mcasp_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *cpu_dai)
+{
+ struct davinci_audio_dev *dev = cpu_dai->private_data;
+ struct davinci_pcm_dma_params *dma_params =
+ dev->dma_params[substream->stream];
+ int word_length;
+ u8 numevt;
+
+ davinci_hw_common_param(dev, substream->stream);
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ numevt = dev->txnumevt;
+ else
+ numevt = dev->rxnumevt;
+
+ if (!numevt)
+ numevt = 1;
+
+ if (dev->op_mode == DAVINCI_MCASP_DIT_MODE)
+ davinci_hw_dit_param(dev);
+ else
+ davinci_hw_param(dev, substream->stream);
+
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S8:
+ dma_params->data_type = 1;
+ word_length = DAVINCI_AUDIO_WORD_8;
+ break;
+
+ case SNDRV_PCM_FORMAT_S16_LE:
+ dma_params->data_type = 2;
+ word_length = DAVINCI_AUDIO_WORD_16;
+ break;
+
+ case SNDRV_PCM_FORMAT_S32_LE:
+ dma_params->data_type = 4;
+ word_length = DAVINCI_AUDIO_WORD_32;
+ break;
+
+ default:
+ printk(KERN_WARNING "davinci-mcasp: unsupported PCM format");
+ return -EINVAL;
+ }
+
+ if (dev->version == MCASP_VERSION_2) {
+ dma_params->data_type *= numevt;
+ dma_params->acnt = 4 * numevt;
+ } else
+ dma_params->acnt = dma_params->data_type;
+
+ davinci_config_channel_size(dev, word_length);
+
+ return 0;
+}
+
+static int davinci_mcasp_trigger(struct snd_pcm_substream *substream,
+ int cmd, struct snd_soc_dai *cpu_dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct davinci_audio_dev *dev = rtd->dai->cpu_dai->private_data;
+ int ret = 0;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_RESUME:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ davinci_mcasp_start(dev, substream->stream);
+ break;
+
+ case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ davinci_mcasp_stop(dev, substream->stream);
+ break;
+
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static struct snd_soc_dai_ops davinci_mcasp_dai_ops = {
+ .startup = davinci_mcasp_startup,
+ .trigger = davinci_mcasp_trigger,
+ .hw_params = davinci_mcasp_hw_params,
+ .set_fmt = davinci_mcasp_set_dai_fmt,
+
+};
+
+struct snd_soc_dai davinci_mcasp_dai[] = {
+ {
+ .name = "davinci-i2s",
+ .id = 0,
+ .playback = {
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = DAVINCI_MCASP_RATES,
+ .formats = SNDRV_PCM_FMTBIT_S8 |
+ SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S32_LE,
+ },
+ .capture = {
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = DAVINCI_MCASP_RATES,
+ .formats = SNDRV_PCM_FMTBIT_S8 |
+ SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S32_LE,
+ },
+ .ops = &davinci_mcasp_dai_ops,
+
+ },
+ {
+ .name = "davinci-dit",
+ .id = 1,
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 384,
+ .rates = DAVINCI_MCASP_RATES,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ },
+ .ops = &davinci_mcasp_dai_ops,
+ },
+
+};
+EXPORT_SYMBOL_GPL(davinci_mcasp_dai);
+
+static int davinci_mcasp_probe(struct platform_device *pdev)
+{
+ struct davinci_pcm_dma_params *dma_data;
+ struct resource *mem, *ioarea, *res;
+ struct snd_platform_data *pdata;
+ struct davinci_audio_dev *dev;
+ int count = 0;
+ int ret = 0;
+
+ dev = kzalloc(sizeof(struct davinci_audio_dev), GFP_KERNEL);
+ if (!dev)
+ return -ENOMEM;
+
+ dma_data = kzalloc(sizeof(struct davinci_pcm_dma_params) * 2,
+ GFP_KERNEL);
+ if (!dma_data) {
+ ret = -ENOMEM;
+ goto err_release_dev;
+ }
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem) {
+ dev_err(&pdev->dev, "no mem resource?\n");
+ ret = -ENODEV;
+ goto err_release_data;
+ }
+
+ ioarea = request_mem_region(mem->start,
+ (mem->end - mem->start) + 1, pdev->name);
+ if (!ioarea) {
+ dev_err(&pdev->dev, "Audio region already claimed\n");
+ ret = -EBUSY;
+ goto err_release_data;
+ }
+
+ pdata = pdev->dev.platform_data;
+ dev->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(dev->clk)) {
+ ret = -ENODEV;
+ goto err_release_region;
+ }
+
+ clk_enable(dev->clk);
+
+ dev->base = (void __iomem *)IO_ADDRESS(mem->start);
+ dev->op_mode = pdata->op_mode;
+ dev->tdm_slots = pdata->tdm_slots;
+ dev->num_serializer = pdata->num_serializer;
+ dev->serial_dir = pdata->serial_dir;
+ dev->codec_fmt = pdata->codec_fmt;
+ dev->version = pdata->version;
+ dev->txnumevt = pdata->txnumevt;
+ dev->rxnumevt = pdata->rxnumevt;
+
+ dma_data[count].name = "I2S PCM Stereo out";
+ dma_data[count].eventq_no = pdata->eventq_no;
+ dma_data[count].dma_addr = (dma_addr_t) (pdata->tx_dma_offset +
+ io_v2p(dev->base));
+ dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK] = &dma_data[count];
+
+ /* first TX, then RX */
+ res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "no DMA resource\n");
+ goto err_release_region;
+ }
+
+ dma_data[count].channel = res->start;
+ count++;
+ dma_data[count].name = "I2S PCM Stereo in";
+ dma_data[count].eventq_no = pdata->eventq_no;
+ dma_data[count].dma_addr = (dma_addr_t)(pdata->rx_dma_offset +
+ io_v2p(dev->base));
+ dev->dma_params[SNDRV_PCM_STREAM_CAPTURE] = &dma_data[count];
+
+ res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+ if (!res) {
+ dev_err(&pdev->dev, "no DMA resource\n");
+ goto err_release_region;
+ }
+
+ dma_data[count].channel = res->start;
+ davinci_mcasp_dai[pdata->op_mode].private_data = dev;
+ davinci_mcasp_dai[pdata->op_mode].dev = &pdev->dev;
+ ret = snd_soc_register_dai(&davinci_mcasp_dai[pdata->op_mode]);
+
+ if (ret != 0)
+ goto err_release_region;
+ return 0;
+
+err_release_region:
+ release_mem_region(mem->start, (mem->end - mem->start) + 1);
+err_release_data:
+ kfree(dma_data);
+err_release_dev:
+ kfree(dev);
+
+ return ret;
+}
+
+static int davinci_mcasp_remove(struct platform_device *pdev)
+{
+ struct snd_platform_data *pdata = pdev->dev.platform_data;
+ struct davinci_pcm_dma_params *dma_data;
+ struct davinci_audio_dev *dev;
+ struct resource *mem;
+
+ snd_soc_unregister_dai(&davinci_mcasp_dai[pdata->op_mode]);
+ dev = davinci_mcasp_dai[pdata->op_mode].private_data;
+ clk_disable(dev->clk);
+ clk_put(dev->clk);
+ dev->clk = NULL;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(mem->start, (mem->end - mem->start) + 1);
+
+ dma_data = dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK];
+ kfree(dma_data);
+ kfree(dev);
+
+ return 0;
+}
+
+static struct platform_driver davinci_mcasp_driver = {
+ .probe = davinci_mcasp_probe,
+ .remove = davinci_mcasp_remove,
+ .driver = {
+ .name = "davinci-mcasp",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init davinci_mcasp_init(void)
+{
+ return platform_driver_register(&davinci_mcasp_driver);
+}
+module_init(davinci_mcasp_init);
+
+static void __exit davinci_mcasp_exit(void)
+{
+ platform_driver_unregister(&davinci_mcasp_driver);
+}
+module_exit(davinci_mcasp_exit);
+
+MODULE_AUTHOR("Steve Chen");
+MODULE_DESCRIPTION("TI DAVINCI McASP SoC Interface");
+MODULE_LICENSE("GPL");
+
--- /dev/null
+/*
+ * ALSA SoC McASP Audio Layer for TI DAVINCI processor
+ *
+ * MCASP related definitions
+ *
+ * Author: Nirmal Pandey <n-pandey@ti.com>,
+ * Suresh Rajashekara <suresh.r@ti.com>
+ * Steve Chen <schen@.mvista.com>
+ *
+ * Copyright: (C) 2009 MontaVista Software, Inc., <source@mvista.com>
+ * Copyright: (C) 2009 Texas Instruments, India
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef DAVINCI_MCASP_H
+#define DAVINCI_MCASP_H
+
+#include <linux/io.h>
+#include <mach/asp.h>
+#include "davinci-pcm.h"
+
+extern struct snd_soc_dai davinci_mcasp_dai[];
+
+#define DAVINCI_MCASP_RATES SNDRV_PCM_RATE_8000_96000
+#define DAVINCI_MCASP_I2S_DAI 0
+#define DAVINCI_MCASP_DIT_DAI 1
+
+enum {
+ DAVINCI_AUDIO_WORD_8 = 0,
+ DAVINCI_AUDIO_WORD_12,
+ DAVINCI_AUDIO_WORD_16,
+ DAVINCI_AUDIO_WORD_20,
+ DAVINCI_AUDIO_WORD_24,
+ DAVINCI_AUDIO_WORD_32,
+ DAVINCI_AUDIO_WORD_28, /* This is only valid for McASP */
+};
+
+struct davinci_audio_dev {
+ void __iomem *base;
+ int sample_rate;
+ struct clk *clk;
+ struct davinci_pcm_dma_params *dma_params[2];
+ unsigned int codec_fmt;
+
+ /* McASP specific data */
+ int tdm_slots;
+ u8 op_mode;
+ u8 num_serializer;
+ u8 *serial_dir;
+ u8 version;
+
+ /* McASP FIFO related */
+ u8 txnumevt;
+ u8 rxnumevt;
+};
+
+#endif /* DAVINCI_MCASP_H */
dma_addr_t src, dst;
unsigned short src_bidx, dst_bidx;
unsigned int data_type;
+ unsigned short acnt;
unsigned int count;
period_size = snd_pcm_lib_period_bytes(substream);
dst_bidx = data_type;
}
+ acnt = prtd->params->acnt;
edma_set_src(lch, src, INCR, W8BIT);
edma_set_dest(lch, dst, INCR, W8BIT);
edma_set_src_index(lch, src_bidx, 0);
edma_set_dest_index(lch, dst_bidx, 0);
- edma_set_transfer_params(lch, data_type, count, 1, 0, ASYNC);
+ edma_set_transfer_params(lch, acnt, count, 1, 0, ASYNC);
prtd->period++;
if (unlikely(prtd->period >= runtime->periods))
/* Copy self-linked parameter RAM entry into master channel */
edma_read_slot(prtd->slave_lch, &temp);
edma_write_slot(prtd->master_lch, &temp);
+ davinci_pcm_enqueue_dma(substream);
return 0;
}
int ret = 0;
snd_soc_set_runtime_hwparams(substream, &davinci_pcm_hardware);
+ /* ensure that buffer size is a multiple of period size */
+ ret = snd_pcm_hw_constraint_integer(runtime,
+ SNDRV_PCM_HW_PARAM_PERIODS);
+ if (ret < 0)
+ return ret;
prtd = kzalloc(sizeof(struct davinci_runtime_data), GFP_KERNEL);
if (prtd == NULL)
#ifndef _DAVINCI_PCM_H
#define _DAVINCI_PCM_H
+#include <mach/edma.h>
+#include <mach/asp.h>
+
+
struct davinci_pcm_dma_params {
- char *name; /* stream identifier */
- int channel; /* sync dma channel ID */
- dma_addr_t dma_addr; /* device physical address for DMA */
- unsigned int data_type; /* xfer data type */
+ char *name; /* stream identifier */
+ int channel; /* sync dma channel ID */
+ unsigned short acnt;
+ dma_addr_t dma_addr; /* device physical address for DMA */
+ enum dma_event_q eventq_no; /* event queue number */
+ unsigned char data_type; /* xfer data type */
+ unsigned char convert_mono_stereo;
};
-struct evm_snd_platform_data {
- int tx_dma_ch;
- int rx_dma_ch;
-};
extern struct snd_soc_platform davinci_soc_platform;
#include "mpc5200_psc_ac97.h"
#include "../codecs/stac9766.h"
+#define DRV_NAME "efika-audio-fabric"
+
static struct snd_soc_device device;
static struct snd_soc_card card;
static void psc_dma_bcom_enqueue_tx(struct psc_dma_stream *s)
{
+ if (s->appl_ptr > s->runtime->control->appl_ptr) {
+ /*
+ * In this case s->runtime->control->appl_ptr has wrapped around.
+ * Play the data to the end of the boundary, then wrap our own
+ * appl_ptr back around.
+ */
+ while (s->appl_ptr < s->runtime->boundary) {
+ if (bcom_queue_full(s->bcom_task))
+ return;
+
+ s->appl_ptr += s->period_size;
+
+ psc_dma_bcom_enqueue_next_buffer(s);
+ }
+ s->appl_ptr -= s->runtime->boundary;
+ }
+
while (s->appl_ptr < s->runtime->control->appl_ptr) {
if (bcom_queue_full(s->bcom_task))
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
+#include <linux/delay.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
out_8(®s->op1, MPC52xx_PSC_OP_RES);
udelay(10);
out_8(®s->op0, MPC52xx_PSC_OP_RES);
- udelay(50);
+ msleep(1);
psc_ac97_warm_reset(ac97);
}
#include "mpc5200_psc_ac97.h"
#include "../codecs/wm9712.h"
+#define DRV_NAME "pcm030-audio-fabric"
+
static struct snd_soc_device device;
static struct snd_soc_card card;
--- /dev/null
+config SND_MX1_MX2_SOC
+ tristate "SoC Audio for Freecale i.MX1x i.MX2x CPUs"
+ depends on ARCH_MX2 || ARCH_MX1
+ select SND_PCM
+ help
+ Say Y or M if you want to add support for codecs attached to
+ the MX1 or MX2 SSI interface.
+
+config SND_MXC_SOC_SSI
+ tristate
+
+config SND_SOC_MX27VIS_WM8974
+ tristate "SoC Audio support for MX27 - WM8974 Visstrim_sm10 board"
+ depends on SND_MX1_MX2_SOC && MACH_MX27 && MACH_IMX27_VISSTRIM_M10
+ select SND_MXC_SOC_SSI
+ select SND_SOC_WM8974
+ help
+ Say Y if you want to add support for SoC audio on Visstrim SM10
+ board with WM8974.
+
+
--- /dev/null
+# i.MX Platform Support
+snd-soc-mx1_mx2-objs := mx1_mx2-pcm.o
+snd-soc-mxc-ssi-objs := mxc-ssi.o
+
+obj-$(CONFIG_SND_MX1_MX2_SOC) += snd-soc-mx1_mx2.o
+obj-$(CONFIG_SND_MXC_SOC_SSI) += snd-soc-mxc-ssi.o
+
+# i.MX Machine Support
+snd-soc-mx27vis-wm8974-objs := mx27vis_wm8974.o
+obj-$(CONFIG_SND_SOC_MX27VIS_WM8974) += snd-soc-mx27vis-wm8974.o
--- /dev/null
+/*
+ * mx1_mx2-pcm.c -- ALSA SoC interface for Freescale i.MX1x, i.MX2x CPUs
+ *
+ * Copyright 2009 Vista Silicon S.L.
+ * Author: Javier Martin
+ * javier.martin@vista-silicon.com
+ *
+ * Based on mxc-pcm.c by Liam Girdwood.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <asm/dma.h>
+#include <mach/hardware.h>
+#include <mach/dma-mx1-mx2.h>
+
+#include "mx1_mx2-pcm.h"
+
+
+static const struct snd_pcm_hardware mx1_mx2_pcm_hardware = {
+ .info = (SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_MMAP_VALID),
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .buffer_bytes_max = 32 * 1024,
+ .period_bytes_min = 64,
+ .period_bytes_max = 8 * 1024,
+ .periods_min = 2,
+ .periods_max = 255,
+ .fifo_size = 0,
+};
+
+struct mx1_mx2_runtime_data {
+ int dma_ch;
+ int active;
+ unsigned int period;
+ unsigned int periods;
+ int tx_spin;
+ spinlock_t dma_lock;
+ struct mx1_mx2_pcm_dma_params *dma_params;
+};
+
+
+/**
+ * This function stops the current dma transfer for playback
+ * and clears the dma pointers.
+ *
+ * @param substream pointer to the structure of the current stream.
+ *
+ */
+static int audio_stop_dma(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct mx1_mx2_runtime_data *prtd = runtime->private_data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&prtd->dma_lock, flags);
+
+ pr_debug("%s\n", __func__);
+
+ prtd->active = 0;
+ prtd->period = 0;
+ prtd->periods = 0;
+
+ /* this stops the dma channel and clears the buffer ptrs */
+
+ imx_dma_disable(prtd->dma_ch);
+
+ spin_unlock_irqrestore(&prtd->dma_lock, flags);
+
+ return 0;
+}
+
+/**
+ * This function is called whenever a new audio block needs to be
+ * transferred to the codec. The function receives the address and the size
+ * of the new block and start a new DMA transfer.
+ *
+ * @param substream pointer to the structure of the current stream.
+ *
+ */
+static int dma_new_period(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct mx1_mx2_runtime_data *prtd = runtime->private_data;
+ unsigned int dma_size;
+ unsigned int offset;
+ int ret = 0;
+ dma_addr_t mem_addr;
+ unsigned int dev_addr;
+
+ if (prtd->active) {
+ dma_size = frames_to_bytes(runtime, runtime->period_size);
+ offset = dma_size * prtd->period;
+
+ pr_debug("%s: period (%d) out of (%d)\n", __func__,
+ prtd->period,
+ runtime->periods);
+ pr_debug("period_size %d frames\n offset %d bytes\n",
+ (unsigned int)runtime->period_size,
+ offset);
+ pr_debug("dma_size %d bytes\n", dma_size);
+
+ snd_BUG_ON(dma_size > mx1_mx2_pcm_hardware.period_bytes_max);
+
+ mem_addr = (dma_addr_t)(runtime->dma_addr + offset);
+ dev_addr = prtd->dma_params->per_address;
+ pr_debug("%s: mem_addr is %x\n dev_addr is %x\n",
+ __func__, mem_addr, dev_addr);
+
+ ret = imx_dma_setup_single(prtd->dma_ch, mem_addr,
+ dma_size, dev_addr,
+ prtd->dma_params->transfer_type);
+ if (ret < 0) {
+ printk(KERN_ERR "Error %d configuring DMA\n", ret);
+ return ret;
+ }
+ imx_dma_enable(prtd->dma_ch);
+
+ pr_debug("%s: transfer enabled\nmem_addr = %x\n",
+ __func__, (unsigned int) mem_addr);
+ pr_debug("dev_addr = %x\ndma_size = %d\n",
+ (unsigned int) dev_addr, dma_size);
+
+ prtd->tx_spin = 1; /* FGA little trick to retrieve DMA pos */
+ prtd->period++;
+ prtd->period %= runtime->periods;
+ }
+ return ret;
+}
+
+
+/**
+ * This is a callback which will be called
+ * when a TX transfer finishes. The call occurs
+ * in interrupt context.
+ *
+ * @param dat pointer to the structure of the current stream.
+ *
+ */
+static void audio_dma_irq(int channel, void *data)
+{
+ struct snd_pcm_substream *substream;
+ struct snd_pcm_runtime *runtime;
+ struct mx1_mx2_runtime_data *prtd;
+ unsigned int dma_size;
+ unsigned int previous_period;
+ unsigned int offset;
+
+ substream = data;
+ runtime = substream->runtime;
+ prtd = runtime->private_data;
+ previous_period = prtd->periods;
+ dma_size = frames_to_bytes(runtime, runtime->period_size);
+ offset = dma_size * previous_period;
+
+ prtd->tx_spin = 0;
+ prtd->periods++;
+ prtd->periods %= runtime->periods;
+
+ pr_debug("%s: irq per %d offset %x\n", __func__, prtd->periods, offset);
+
+ /*
+ * If we are getting a callback for an active stream then we inform
+ * the PCM middle layer we've finished a period
+ */
+ if (prtd->active)
+ snd_pcm_period_elapsed(substream);
+
+ /*
+ * Trig next DMA transfer
+ */
+ dma_new_period(substream);
+}
+
+/**
+ * This function configures the hardware to allow audio
+ * playback operations. It is called by ALSA framework.
+ *
+ * @param substream pointer to the structure of the current stream.
+ *
+ * @return 0 on success, -1 otherwise.
+ */
+static int
+snd_mx1_mx2_prepare(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct mx1_mx2_runtime_data *prtd = runtime->private_data;
+
+ prtd->period = 0;
+ prtd->periods = 0;
+
+ return 0;
+}
+
+static int mx1_mx2_pcm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *hw_params)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ int ret;
+
+ ret = snd_pcm_lib_malloc_pages(substream,
+ params_buffer_bytes(hw_params));
+ if (ret < 0) {
+ printk(KERN_ERR "%s: Error %d failed to malloc pcm pages \n",
+ __func__, ret);
+ return ret;
+ }
+
+ pr_debug("%s: snd_imx1_mx2_audio_hw_params runtime->dma_addr 0x(%x)\n",
+ __func__, (unsigned int)runtime->dma_addr);
+ pr_debug("%s: snd_imx1_mx2_audio_hw_params runtime->dma_area 0x(%x)\n",
+ __func__, (unsigned int)runtime->dma_area);
+ pr_debug("%s: snd_imx1_mx2_audio_hw_params runtime->dma_bytes 0x(%x)\n",
+ __func__, (unsigned int)runtime->dma_bytes);
+
+ return ret;
+}
+
+static int mx1_mx2_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct mx1_mx2_runtime_data *prtd = runtime->private_data;
+
+ imx_dma_free(prtd->dma_ch);
+
+ snd_pcm_lib_free_pages(substream);
+
+ return 0;
+}
+
+static int mx1_mx2_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+ struct mx1_mx2_runtime_data *prtd = substream->runtime->private_data;
+ int ret = 0;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ prtd->tx_spin = 0;
+ /* requested stream startup */
+ prtd->active = 1;
+ pr_debug("%s: starting dma_new_period\n", __func__);
+ ret = dma_new_period(substream);
+ break;
+ case SNDRV_PCM_TRIGGER_STOP:
+ /* requested stream shutdown */
+ pr_debug("%s: stopping dma transfer\n", __func__);
+ ret = audio_stop_dma(substream);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+static snd_pcm_uframes_t
+mx1_mx2_pcm_pointer(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct mx1_mx2_runtime_data *prtd = runtime->private_data;
+ unsigned int offset = 0;
+
+ /* tx_spin value is used here to check if a transfer is active */
+ if (prtd->tx_spin) {
+ offset = (runtime->period_size * (prtd->periods)) +
+ (runtime->period_size >> 1);
+ if (offset >= runtime->buffer_size)
+ offset = runtime->period_size >> 1;
+ } else {
+ offset = (runtime->period_size * (prtd->periods));
+ if (offset >= runtime->buffer_size)
+ offset = 0;
+ }
+ pr_debug("%s: pointer offset %x\n", __func__, offset);
+
+ return offset;
+}
+
+static int mx1_mx2_pcm_open(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct mx1_mx2_runtime_data *prtd;
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct mx1_mx2_pcm_dma_params *dma_data = rtd->dai->cpu_dai->dma_data;
+ int ret;
+
+ snd_soc_set_runtime_hwparams(substream, &mx1_mx2_pcm_hardware);
+
+ ret = snd_pcm_hw_constraint_integer(runtime,
+ SNDRV_PCM_HW_PARAM_PERIODS);
+ if (ret < 0)
+ return ret;
+
+ prtd = kzalloc(sizeof(struct mx1_mx2_runtime_data), GFP_KERNEL);
+ if (prtd == NULL) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ runtime->private_data = prtd;
+
+ if (!dma_data)
+ return -ENODEV;
+
+ prtd->dma_params = dma_data;
+
+ pr_debug("%s: Requesting dma channel (%s)\n", __func__,
+ prtd->dma_params->name);
+ prtd->dma_ch = imx_dma_request_by_prio(prtd->dma_params->name,
+ DMA_PRIO_HIGH);
+ if (prtd->dma_ch < 0) {
+ printk(KERN_ERR "Error %d requesting dma channel\n", ret);
+ return ret;
+ }
+ imx_dma_config_burstlen(prtd->dma_ch,
+ prtd->dma_params->watermark_level);
+
+ ret = imx_dma_config_channel(prtd->dma_ch,
+ prtd->dma_params->per_config,
+ prtd->dma_params->mem_config,
+ prtd->dma_params->event_id, 0);
+
+ if (ret) {
+ pr_debug(KERN_ERR "Error %d configuring dma channel %d\n",
+ ret, prtd->dma_ch);
+ return ret;
+ }
+
+ pr_debug("%s: Setting tx dma callback function\n", __func__);
+ ret = imx_dma_setup_handlers(prtd->dma_ch,
+ audio_dma_irq, NULL,
+ (void *)substream);
+ if (ret < 0) {
+ printk(KERN_ERR "Error %d setting dma callback function\n", ret);
+ return ret;
+ }
+ return 0;
+
+ out:
+ return ret;
+}
+
+static int mx1_mx2_pcm_close(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct mx1_mx2_runtime_data *prtd = runtime->private_data;
+
+ kfree(prtd);
+
+ return 0;
+}
+
+static int mx1_mx2_pcm_mmap(struct snd_pcm_substream *substream,
+ struct vm_area_struct *vma)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ return dma_mmap_writecombine(substream->pcm->card->dev, vma,
+ runtime->dma_area,
+ runtime->dma_addr,
+ runtime->dma_bytes);
+}
+
+static struct snd_pcm_ops mx1_mx2_pcm_ops = {
+ .open = mx1_mx2_pcm_open,
+ .close = mx1_mx2_pcm_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = mx1_mx2_pcm_hw_params,
+ .hw_free = mx1_mx2_pcm_hw_free,
+ .prepare = snd_mx1_mx2_prepare,
+ .trigger = mx1_mx2_pcm_trigger,
+ .pointer = mx1_mx2_pcm_pointer,
+ .mmap = mx1_mx2_pcm_mmap,
+};
+
+static u64 mx1_mx2_pcm_dmamask = 0xffffffff;
+
+static int mx1_mx2_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream)
+{
+ struct snd_pcm_substream *substream = pcm->streams[stream].substream;
+ struct snd_dma_buffer *buf = &substream->dma_buffer;
+ size_t size = mx1_mx2_pcm_hardware.buffer_bytes_max;
+ buf->dev.type = SNDRV_DMA_TYPE_DEV;
+ buf->dev.dev = pcm->card->dev;
+ buf->private_data = NULL;
+
+ /* Reserve uncached-buffered memory area for DMA */
+ buf->area = dma_alloc_writecombine(pcm->card->dev, size,
+ &buf->addr, GFP_KERNEL);
+
+ pr_debug("%s: preallocate_dma_buffer: area=%p, addr=%p, size=%d\n",
+ __func__, (void *) buf->area, (void *) buf->addr, size);
+
+ if (!buf->area)
+ return -ENOMEM;
+
+ buf->bytes = size;
+ return 0;
+}
+
+static void mx1_mx2_pcm_free_dma_buffers(struct snd_pcm *pcm)
+{
+ struct snd_pcm_substream *substream;
+ struct snd_dma_buffer *buf;
+ int stream;
+
+ for (stream = 0; stream < 2; stream++) {
+ substream = pcm->streams[stream].substream;
+ if (!substream)
+ continue;
+
+ buf = &substream->dma_buffer;
+ if (!buf->area)
+ continue;
+
+ dma_free_writecombine(pcm->card->dev, buf->bytes,
+ buf->area, buf->addr);
+ buf->area = NULL;
+ }
+}
+
+static int mx1_mx2_pcm_new(struct snd_card *card, struct snd_soc_dai *dai,
+ struct snd_pcm *pcm)
+{
+ int ret = 0;
+
+ if (!card->dev->dma_mask)
+ card->dev->dma_mask = &mx1_mx2_pcm_dmamask;
+ if (!card->dev->coherent_dma_mask)
+ card->dev->coherent_dma_mask = 0xffffffff;
+
+ if (dai->playback.channels_min) {
+ ret = mx1_mx2_pcm_preallocate_dma_buffer(pcm,
+ SNDRV_PCM_STREAM_PLAYBACK);
+ pr_debug("%s: preallocate playback buffer\n", __func__);
+ if (ret)
+ goto out;
+ }
+
+ if (dai->capture.channels_min) {
+ ret = mx1_mx2_pcm_preallocate_dma_buffer(pcm,
+ SNDRV_PCM_STREAM_CAPTURE);
+ pr_debug("%s: preallocate capture buffer\n", __func__);
+ if (ret)
+ goto out;
+ }
+ out:
+ return ret;
+}
+
+struct snd_soc_platform mx1_mx2_soc_platform = {
+ .name = "mx1_mx2-audio",
+ .pcm_ops = &mx1_mx2_pcm_ops,
+ .pcm_new = mx1_mx2_pcm_new,
+ .pcm_free = mx1_mx2_pcm_free_dma_buffers,
+};
+EXPORT_SYMBOL_GPL(mx1_mx2_soc_platform);
+
+static int __init mx1_mx2_soc_platform_init(void)
+{
+ return snd_soc_register_platform(&mx1_mx2_soc_platform);
+}
+module_init(mx1_mx2_soc_platform_init);
+
+static void __exit mx1_mx2_soc_platform_exit(void)
+{
+ snd_soc_unregister_platform(&mx1_mx2_soc_platform);
+}
+module_exit(mx1_mx2_soc_platform_exit);
+
+MODULE_AUTHOR("Javier Martin, javier.martin@vista-silicon.com");
+MODULE_DESCRIPTION("Freescale i.MX2x, i.MX1x PCM DMA module");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * mx1_mx2-pcm.h :- ASoC platform header for Freescale i.MX1x, i.MX2x
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _MX1_MX2_PCM_H
+#define _MX1_MX2_PCM_H
+
+/* DMA information for mx1_mx2 platforms */
+struct mx1_mx2_pcm_dma_params {
+ char *name; /* stream identifier */
+ unsigned int transfer_type; /* READ or WRITE DMA transfer */
+ dma_addr_t per_address; /* physical address of SSI fifo */
+ int event_id; /* fixed DMA number for SSI fifo */
+ int watermark_level; /* SSI fifo watermark level */
+ int per_config; /* DMA Config flags for peripheral */
+ int mem_config; /* DMA Config flags for RAM */
+ };
+
+/* platform data */
+extern struct snd_soc_platform mx1_mx2_soc_platform;
+
+#endif
--- /dev/null
+/*
+ * mx27vis_wm8974.c -- SoC audio for mx27vis
+ *
+ * Copyright 2009 Vista Silicon S.L.
+ * Author: Javier Martin
+ * javier.martin@vista-silicon.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+
+#include "../codecs/wm8974.h"
+#include "mx1_mx2-pcm.h"
+#include "mxc-ssi.h"
+#include <mach/gpio.h>
+#include <mach/iomux.h>
+
+#define IGNORED_ARG 0
+
+
+static struct snd_soc_card mx27vis;
+
+/**
+ * This function connects SSI1 (HPCR1) as slave to
+ * SSI1 external signals (PPCR1)
+ * As slave, HPCR1 must set TFSDIR and TCLKDIR as inputs from
+ * port 4
+ */
+void audmux_connect_1_4(void)
+{
+ pr_debug("AUDMUX: normal operation mode\n");
+ /* Reset HPCR1 and PPCR1 */
+
+ DAM_HPCR1 = 0x00000000;
+ DAM_PPCR1 = 0x00000000;
+
+ /* set to synchronous */
+ DAM_HPCR1 |= AUDMUX_HPCR_SYN;
+ DAM_PPCR1 |= AUDMUX_PPCR_SYN;
+
+
+ /* set Rx sources 1 <--> 4 */
+ DAM_HPCR1 |= AUDMUX_HPCR_RXDSEL(3); /* port 4 */
+ DAM_PPCR1 |= AUDMUX_PPCR_RXDSEL(0); /* port 1 */
+
+ /* set Tx frame and Clock direction and source 4 --> 1 output */
+ DAM_HPCR1 |= AUDMUX_HPCR_TFSDIR | AUDMUX_HPCR_TCLKDIR;
+ DAM_HPCR1 |= AUDMUX_HPCR_TFCSEL(3); /* TxDS and TxCclk from port 4 */
+
+ return;
+}
+
+static int mx27vis_hifi_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ unsigned int pll_out = 0, bclk = 0, fmt = 0, mclk = 0;
+ int ret = 0;
+
+ /*
+ * The WM8974 is better at generating accurate audio clocks than the
+ * MX27 SSI controller, so we will use it as master when we can.
+ */
+ switch (params_rate(params)) {
+ case 8000:
+ fmt = SND_SOC_DAIFMT_CBM_CFM;
+ mclk = WM8974_MCLKDIV_12;
+ pll_out = 24576000;
+ break;
+ case 16000:
+ fmt = SND_SOC_DAIFMT_CBM_CFM;
+ pll_out = 12288000;
+ break;
+ case 48000:
+ fmt = SND_SOC_DAIFMT_CBM_CFM;
+ bclk = WM8974_BCLKDIV_4;
+ pll_out = 12288000;
+ break;
+ case 96000:
+ fmt = SND_SOC_DAIFMT_CBM_CFM;
+ bclk = WM8974_BCLKDIV_2;
+ pll_out = 12288000;
+ break;
+ case 11025:
+ fmt = SND_SOC_DAIFMT_CBM_CFM;
+ bclk = WM8974_BCLKDIV_16;
+ pll_out = 11289600;
+ break;
+ case 22050:
+ fmt = SND_SOC_DAIFMT_CBM_CFM;
+ bclk = WM8974_BCLKDIV_8;
+ pll_out = 11289600;
+ break;
+ case 44100:
+ fmt = SND_SOC_DAIFMT_CBM_CFM;
+ bclk = WM8974_BCLKDIV_4;
+ mclk = WM8974_MCLKDIV_2;
+ pll_out = 11289600;
+ break;
+ case 88200:
+ fmt = SND_SOC_DAIFMT_CBM_CFM;
+ bclk = WM8974_BCLKDIV_2;
+ pll_out = 11289600;
+ break;
+ }
+
+ /* set codec DAI configuration */
+ ret = codec_dai->ops->set_fmt(codec_dai,
+ SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_IF |
+ SND_SOC_DAIFMT_SYNC | fmt);
+ if (ret < 0) {
+ printk(KERN_ERR "Error from codec DAI configuration\n");
+ return ret;
+ }
+
+ /* set cpu DAI configuration */
+ ret = cpu_dai->ops->set_fmt(cpu_dai,
+ SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_SYNC | fmt);
+ if (ret < 0) {
+ printk(KERN_ERR "Error from cpu DAI configuration\n");
+ return ret;
+ }
+
+ /* Put DC field of STCCR to 1 (not zero) */
+ ret = cpu_dai->ops->set_tdm_slot(cpu_dai, 0, 2);
+
+ /* set the SSI system clock as input */
+ ret = cpu_dai->ops->set_sysclk(cpu_dai, IMX_SSP_SYS_CLK, 0,
+ SND_SOC_CLOCK_IN);
+ if (ret < 0) {
+ printk(KERN_ERR "Error when setting system SSI clk\n");
+ return ret;
+ }
+
+ /* set codec BCLK division for sample rate */
+ ret = codec_dai->ops->set_clkdiv(codec_dai, WM8974_BCLKDIV, bclk);
+ if (ret < 0) {
+ printk(KERN_ERR "Error when setting BCLK division\n");
+ return ret;
+ }
+
+
+ /* codec PLL input is 25 MHz */
+ ret = codec_dai->ops->set_pll(codec_dai, IGNORED_ARG,
+ 25000000, pll_out);
+ if (ret < 0) {
+ printk(KERN_ERR "Error when setting PLL input\n");
+ return ret;
+ }
+
+ /*set codec MCLK division for sample rate */
+ ret = codec_dai->ops->set_clkdiv(codec_dai, WM8974_MCLKDIV, mclk);
+ if (ret < 0) {
+ printk(KERN_ERR "Error when setting MCLK division\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mx27vis_hifi_hw_free(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+
+ /* disable the PLL */
+ return codec_dai->ops->set_pll(codec_dai, IGNORED_ARG, 0, 0);
+}
+
+/*
+ * mx27vis WM8974 HiFi DAI opserations.
+ */
+static struct snd_soc_ops mx27vis_hifi_ops = {
+ .hw_params = mx27vis_hifi_hw_params,
+ .hw_free = mx27vis_hifi_hw_free,
+};
+
+
+static int mx27vis_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ return 0;
+}
+
+static int mx27vis_resume(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static int mx27vis_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+
+ ret = get_ssi_clk(0, &pdev->dev);
+
+ if (ret < 0) {
+ printk(KERN_ERR "%s: cant get ssi clock\n", __func__);
+ return ret;
+ }
+
+
+ return 0;
+}
+
+static int mx27vis_remove(struct platform_device *pdev)
+{
+ put_ssi_clk(0);
+ return 0;
+}
+
+static struct snd_soc_dai_link mx27vis_dai[] = {
+{ /* Hifi Playback*/
+ .name = "WM8974",
+ .stream_name = "WM8974 HiFi",
+ .cpu_dai = &imx_ssi_pcm_dai[0],
+ .codec_dai = &wm8974_dai,
+ .ops = &mx27vis_hifi_ops,
+},
+};
+
+static struct snd_soc_card mx27vis = {
+ .name = "mx27vis",
+ .platform = &mx1_mx2_soc_platform,
+ .probe = mx27vis_probe,
+ .remove = mx27vis_remove,
+ .suspend_pre = mx27vis_suspend,
+ .resume_post = mx27vis_resume,
+ .dai_link = mx27vis_dai,
+ .num_links = ARRAY_SIZE(mx27vis_dai),
+};
+
+static struct snd_soc_device mx27vis_snd_devdata = {
+ .card = &mx27vis,
+ .codec_dev = &soc_codec_dev_wm8974,
+};
+
+static struct platform_device *mx27vis_snd_device;
+
+/* Temporal definition of board specific behaviour */
+void gpio_ssi_active(int ssi_num)
+{
+ int ret = 0;
+
+ unsigned int ssi1_pins[] = {
+ PC20_PF_SSI1_FS,
+ PC21_PF_SSI1_RXD,
+ PC22_PF_SSI1_TXD,
+ PC23_PF_SSI1_CLK,
+ };
+ unsigned int ssi2_pins[] = {
+ PC24_PF_SSI2_FS,
+ PC25_PF_SSI2_RXD,
+ PC26_PF_SSI2_TXD,
+ PC27_PF_SSI2_CLK,
+ };
+ if (ssi_num == 0)
+ ret = mxc_gpio_setup_multiple_pins(ssi1_pins,
+ ARRAY_SIZE(ssi1_pins), "USB OTG");
+ else
+ ret = mxc_gpio_setup_multiple_pins(ssi2_pins,
+ ARRAY_SIZE(ssi2_pins), "USB OTG");
+ if (ret)
+ printk(KERN_ERR "Error requesting ssi %x pins\n", ssi_num);
+}
+
+
+static int __init mx27vis_init(void)
+{
+ int ret;
+
+ mx27vis_snd_device = platform_device_alloc("soc-audio", -1);
+ if (!mx27vis_snd_device)
+ return -ENOMEM;
+
+ platform_set_drvdata(mx27vis_snd_device, &mx27vis_snd_devdata);
+ mx27vis_snd_devdata.dev = &mx27vis_snd_device->dev;
+ ret = platform_device_add(mx27vis_snd_device);
+
+ if (ret) {
+ printk(KERN_ERR "ASoC: Platform device allocation failed\n");
+ platform_device_put(mx27vis_snd_device);
+ }
+
+ /* WM8974 uses SSI1 (HPCR1) via AUDMUX port 4 for audio (PPCR1) */
+ gpio_ssi_active(0);
+ audmux_connect_1_4();
+
+ return ret;
+}
+
+static void __exit mx27vis_exit(void)
+{
+ /* We should call some "ssi_gpio_inactive()" properly */
+}
+
+module_init(mx27vis_init);
+module_exit(mx27vis_exit);
+
+
+MODULE_AUTHOR("Javier Martin, javier.martin@vista-silicon.com");
+MODULE_DESCRIPTION("ALSA SoC WM8974 mx27vis");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * mxc-ssi.c -- SSI driver for Freescale IMX
+ *
+ * Copyright 2006 Wolfson Microelectronics PLC.
+ * Author: Liam Girdwood
+ * liam.girdwood@wolfsonmicro.com or linux@wolfsonmicro.com
+ *
+ * Based on mxc-alsa-mc13783 (C) 2006 Freescale.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * TODO:
+ * Need to rework SSI register defs when new defs go into mainline.
+ * Add support for TDM and FIFO 1.
+ * Add support for i.mx3x DMA interface.
+ *
+ */
+
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <mach/dma-mx1-mx2.h>
+#include <asm/mach-types.h>
+
+#include "mxc-ssi.h"
+#include "mx1_mx2-pcm.h"
+
+#define SSI1_PORT 0
+#define SSI2_PORT 1
+
+static int ssi_active[2] = {0, 0};
+
+/* DMA information for mx1_mx2 platforms */
+static struct mx1_mx2_pcm_dma_params imx_ssi1_pcm_stereo_out0 = {
+ .name = "SSI1 PCM Stereo out 0",
+ .transfer_type = DMA_MODE_WRITE,
+ .per_address = SSI1_BASE_ADDR + STX0,
+ .event_id = DMA_REQ_SSI1_TX0,
+ .watermark_level = TXFIFO_WATERMARK,
+ .per_config = IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
+ .mem_config = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
+};
+
+static struct mx1_mx2_pcm_dma_params imx_ssi1_pcm_stereo_out1 = {
+ .name = "SSI1 PCM Stereo out 1",
+ .transfer_type = DMA_MODE_WRITE,
+ .per_address = SSI1_BASE_ADDR + STX1,
+ .event_id = DMA_REQ_SSI1_TX1,
+ .watermark_level = TXFIFO_WATERMARK,
+ .per_config = IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
+ .mem_config = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
+};
+
+static struct mx1_mx2_pcm_dma_params imx_ssi1_pcm_stereo_in0 = {
+ .name = "SSI1 PCM Stereo in 0",
+ .transfer_type = DMA_MODE_READ,
+ .per_address = SSI1_BASE_ADDR + SRX0,
+ .event_id = DMA_REQ_SSI1_RX0,
+ .watermark_level = RXFIFO_WATERMARK,
+ .per_config = IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
+ .mem_config = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
+};
+
+static struct mx1_mx2_pcm_dma_params imx_ssi1_pcm_stereo_in1 = {
+ .name = "SSI1 PCM Stereo in 1",
+ .transfer_type = DMA_MODE_READ,
+ .per_address = SSI1_BASE_ADDR + SRX1,
+ .event_id = DMA_REQ_SSI1_RX1,
+ .watermark_level = RXFIFO_WATERMARK,
+ .per_config = IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
+ .mem_config = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
+};
+
+static struct mx1_mx2_pcm_dma_params imx_ssi2_pcm_stereo_out0 = {
+ .name = "SSI2 PCM Stereo out 0",
+ .transfer_type = DMA_MODE_WRITE,
+ .per_address = SSI2_BASE_ADDR + STX0,
+ .event_id = DMA_REQ_SSI2_TX0,
+ .watermark_level = TXFIFO_WATERMARK,
+ .per_config = IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
+ .mem_config = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
+};
+
+static struct mx1_mx2_pcm_dma_params imx_ssi2_pcm_stereo_out1 = {
+ .name = "SSI2 PCM Stereo out 1",
+ .transfer_type = DMA_MODE_WRITE,
+ .per_address = SSI2_BASE_ADDR + STX1,
+ .event_id = DMA_REQ_SSI2_TX1,
+ .watermark_level = TXFIFO_WATERMARK,
+ .per_config = IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
+ .mem_config = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
+};
+
+static struct mx1_mx2_pcm_dma_params imx_ssi2_pcm_stereo_in0 = {
+ .name = "SSI2 PCM Stereo in 0",
+ .transfer_type = DMA_MODE_READ,
+ .per_address = SSI2_BASE_ADDR + SRX0,
+ .event_id = DMA_REQ_SSI2_RX0,
+ .watermark_level = RXFIFO_WATERMARK,
+ .per_config = IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
+ .mem_config = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
+};
+
+static struct mx1_mx2_pcm_dma_params imx_ssi2_pcm_stereo_in1 = {
+ .name = "SSI2 PCM Stereo in 1",
+ .transfer_type = DMA_MODE_READ,
+ .per_address = SSI2_BASE_ADDR + SRX1,
+ .event_id = DMA_REQ_SSI2_RX1,
+ .watermark_level = RXFIFO_WATERMARK,
+ .per_config = IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
+ .mem_config = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
+};
+
+static struct clk *ssi_clk0, *ssi_clk1;
+
+int get_ssi_clk(int ssi, struct device *dev)
+{
+ switch (ssi) {
+ case 0:
+ ssi_clk0 = clk_get(dev, "ssi1");
+ if (IS_ERR(ssi_clk0))
+ return PTR_ERR(ssi_clk0);
+ return 0;
+ case 1:
+ ssi_clk1 = clk_get(dev, "ssi2");
+ if (IS_ERR(ssi_clk1))
+ return PTR_ERR(ssi_clk1);
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+EXPORT_SYMBOL(get_ssi_clk);
+
+void put_ssi_clk(int ssi)
+{
+ switch (ssi) {
+ case 0:
+ clk_put(ssi_clk0);
+ ssi_clk0 = NULL;
+ break;
+ case 1:
+ clk_put(ssi_clk1);
+ ssi_clk1 = NULL;
+ break;
+ }
+}
+EXPORT_SYMBOL(put_ssi_clk);
+
+/*
+ * SSI system clock configuration.
+ * Should only be called when port is inactive (i.e. SSIEN = 0).
+ */
+static int imx_ssi_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
+ int clk_id, unsigned int freq, int dir)
+{
+ u32 scr;
+
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+ scr = SSI1_SCR;
+ pr_debug("%s: SCR for SSI1 is %x\n", __func__, scr);
+ } else {
+ scr = SSI2_SCR;
+ pr_debug("%s: SCR for SSI2 is %x\n", __func__, scr);
+ }
+
+ if (scr & SSI_SCR_SSIEN) {
+ printk(KERN_WARNING "Warning ssi already enabled\n");
+ return 0;
+ }
+
+ switch (clk_id) {
+ case IMX_SSP_SYS_CLK:
+ if (dir == SND_SOC_CLOCK_OUT) {
+ scr |= SSI_SCR_SYS_CLK_EN;
+ pr_debug("%s: clk of is output\n", __func__);
+ } else {
+ scr &= ~SSI_SCR_SYS_CLK_EN;
+ pr_debug("%s: clk of is input\n", __func__);
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+ pr_debug("%s: writeback of SSI1_SCR\n", __func__);
+ SSI1_SCR = scr;
+ } else {
+ pr_debug("%s: writeback of SSI2_SCR\n", __func__);
+ SSI2_SCR = scr;
+ }
+
+ return 0;
+}
+
+/*
+ * SSI Clock dividers
+ * Should only be called when port is inactive (i.e. SSIEN = 0).
+ */
+static int imx_ssi_set_dai_clkdiv(struct snd_soc_dai *cpu_dai,
+ int div_id, int div)
+{
+ u32 stccr, srccr;
+
+ pr_debug("%s\n", __func__);
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+ if (SSI1_SCR & SSI_SCR_SSIEN)
+ return 0;
+ srccr = SSI1_STCCR;
+ stccr = SSI1_STCCR;
+ } else {
+ if (SSI2_SCR & SSI_SCR_SSIEN)
+ return 0;
+ srccr = SSI2_STCCR;
+ stccr = SSI2_STCCR;
+ }
+
+ switch (div_id) {
+ case IMX_SSI_TX_DIV_2:
+ stccr &= ~SSI_STCCR_DIV2;
+ stccr |= div;
+ break;
+ case IMX_SSI_TX_DIV_PSR:
+ stccr &= ~SSI_STCCR_PSR;
+ stccr |= div;
+ break;
+ case IMX_SSI_TX_DIV_PM:
+ stccr &= ~0xff;
+ stccr |= SSI_STCCR_PM(div);
+ break;
+ case IMX_SSI_RX_DIV_2:
+ stccr &= ~SSI_STCCR_DIV2;
+ stccr |= div;
+ break;
+ case IMX_SSI_RX_DIV_PSR:
+ stccr &= ~SSI_STCCR_PSR;
+ stccr |= div;
+ break;
+ case IMX_SSI_RX_DIV_PM:
+ stccr &= ~0xff;
+ stccr |= SSI_STCCR_PM(div);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+ SSI1_STCCR = stccr;
+ SSI1_SRCCR = srccr;
+ } else {
+ SSI2_STCCR = stccr;
+ SSI2_SRCCR = srccr;
+ }
+ return 0;
+}
+
+/*
+ * SSI Network Mode or TDM slots configuration.
+ * Should only be called when port is inactive (i.e. SSIEN = 0).
+ */
+static int imx_ssi_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai,
+ unsigned int mask, int slots)
+{
+ u32 stmsk, srmsk, stccr;
+
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+ if (SSI1_SCR & SSI_SCR_SSIEN) {
+ printk(KERN_WARNING "Warning ssi already enabled\n");
+ return 0;
+ }
+ stccr = SSI1_STCCR;
+ } else {
+ if (SSI2_SCR & SSI_SCR_SSIEN) {
+ printk(KERN_WARNING "Warning ssi already enabled\n");
+ return 0;
+ }
+ stccr = SSI2_STCCR;
+ }
+
+ stmsk = srmsk = mask;
+ stccr &= ~SSI_STCCR_DC_MASK;
+ stccr |= SSI_STCCR_DC(slots - 1);
+
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+ SSI1_STMSK = stmsk;
+ SSI1_SRMSK = srmsk;
+ SSI1_SRCCR = SSI1_STCCR = stccr;
+ } else {
+ SSI2_STMSK = stmsk;
+ SSI2_SRMSK = srmsk;
+ SSI2_SRCCR = SSI2_STCCR = stccr;
+ }
+
+ return 0;
+}
+
+/*
+ * SSI DAI format configuration.
+ * Should only be called when port is inactive (i.e. SSIEN = 0).
+ * Note: We don't use the I2S modes but instead manually configure the
+ * SSI for I2S.
+ */
+static int imx_ssi_set_dai_fmt(struct snd_soc_dai *cpu_dai,
+ unsigned int fmt)
+{
+ u32 stcr = 0, srcr = 0, scr;
+
+ /*
+ * This is done to avoid this function to modify
+ * previous set values in stcr
+ */
+ stcr = SSI1_STCR;
+
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2)
+ scr = SSI1_SCR & ~(SSI_SCR_SYN | SSI_SCR_NET);
+ else
+ scr = SSI2_SCR & ~(SSI_SCR_SYN | SSI_SCR_NET);
+
+ if (scr & SSI_SCR_SSIEN) {
+ printk(KERN_WARNING "Warning ssi already enabled\n");
+ return 0;
+ }
+
+ /* DAI mode */
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ /* data on rising edge of bclk, frame low 1clk before data */
+ stcr |= SSI_STCR_TFSI | SSI_STCR_TEFS | SSI_STCR_TXBIT0;
+ srcr |= SSI_SRCR_RFSI | SSI_SRCR_REFS | SSI_SRCR_RXBIT0;
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ /* data on rising edge of bclk, frame high with data */
+ stcr |= SSI_STCR_TXBIT0;
+ srcr |= SSI_SRCR_RXBIT0;
+ break;
+ case SND_SOC_DAIFMT_DSP_B:
+ /* data on rising edge of bclk, frame high with data */
+ stcr |= SSI_STCR_TFSL;
+ srcr |= SSI_SRCR_RFSL;
+ break;
+ case SND_SOC_DAIFMT_DSP_A:
+ /* data on rising edge of bclk, frame high 1clk before data */
+ stcr |= SSI_STCR_TFSL | SSI_STCR_TEFS;
+ srcr |= SSI_SRCR_RFSL | SSI_SRCR_REFS;
+ break;
+ }
+
+ /* DAI clock inversion */
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_IB_IF:
+ stcr |= SSI_STCR_TFSI;
+ stcr &= ~SSI_STCR_TSCKP;
+ srcr |= SSI_SRCR_RFSI;
+ srcr &= ~SSI_SRCR_RSCKP;
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ stcr &= ~(SSI_STCR_TSCKP | SSI_STCR_TFSI);
+ srcr &= ~(SSI_SRCR_RSCKP | SSI_SRCR_RFSI);
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ stcr |= SSI_STCR_TFSI | SSI_STCR_TSCKP;
+ srcr |= SSI_SRCR_RFSI | SSI_SRCR_RSCKP;
+ break;
+ case SND_SOC_DAIFMT_NB_NF:
+ stcr &= ~SSI_STCR_TFSI;
+ stcr |= SSI_STCR_TSCKP;
+ srcr &= ~SSI_SRCR_RFSI;
+ srcr |= SSI_SRCR_RSCKP;
+ break;
+ }
+
+ /* DAI clock master masks */
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBS_CFS:
+ stcr |= SSI_STCR_TFDIR | SSI_STCR_TXDIR;
+ srcr |= SSI_SRCR_RFDIR | SSI_SRCR_RXDIR;
+ break;
+ case SND_SOC_DAIFMT_CBM_CFS:
+ stcr |= SSI_STCR_TFDIR;
+ srcr |= SSI_SRCR_RFDIR;
+ break;
+ case SND_SOC_DAIFMT_CBS_CFM:
+ stcr |= SSI_STCR_TXDIR;
+ srcr |= SSI_SRCR_RXDIR;
+ break;
+ }
+
+ /* sync */
+ if (!(fmt & SND_SOC_DAIFMT_ASYNC))
+ scr |= SSI_SCR_SYN;
+
+ /* tdm - only for stereo atm */
+ if (fmt & SND_SOC_DAIFMT_TDM)
+ scr |= SSI_SCR_NET;
+
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+ SSI1_STCR = stcr;
+ SSI1_SRCR = srcr;
+ SSI1_SCR = scr;
+ } else {
+ SSI2_STCR = stcr;
+ SSI2_SRCR = srcr;
+ SSI2_SCR = scr;
+ }
+
+ return 0;
+}
+
+static int imx_ssi_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ /* set up TX DMA params */
+ switch (cpu_dai->id) {
+ case IMX_DAI_SSI0:
+ cpu_dai->dma_data = &imx_ssi1_pcm_stereo_out0;
+ break;
+ case IMX_DAI_SSI1:
+ cpu_dai->dma_data = &imx_ssi1_pcm_stereo_out1;
+ break;
+ case IMX_DAI_SSI2:
+ cpu_dai->dma_data = &imx_ssi2_pcm_stereo_out0;
+ break;
+ case IMX_DAI_SSI3:
+ cpu_dai->dma_data = &imx_ssi2_pcm_stereo_out1;
+ }
+ pr_debug("%s: (playback)\n", __func__);
+ } else {
+ /* set up RX DMA params */
+ switch (cpu_dai->id) {
+ case IMX_DAI_SSI0:
+ cpu_dai->dma_data = &imx_ssi1_pcm_stereo_in0;
+ break;
+ case IMX_DAI_SSI1:
+ cpu_dai->dma_data = &imx_ssi1_pcm_stereo_in1;
+ break;
+ case IMX_DAI_SSI2:
+ cpu_dai->dma_data = &imx_ssi2_pcm_stereo_in0;
+ break;
+ case IMX_DAI_SSI3:
+ cpu_dai->dma_data = &imx_ssi2_pcm_stereo_in1;
+ }
+ pr_debug("%s: (capture)\n", __func__);
+ }
+
+ /*
+ * we cant really change any SSI values after SSI is enabled
+ * need to fix in software for max flexibility - lrg
+ */
+ if (cpu_dai->active) {
+ printk(KERN_WARNING "Warning ssi already enabled\n");
+ return 0;
+ }
+
+ /* reset the SSI port - Sect 45.4.4 */
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+
+ if (!ssi_clk0)
+ return -EINVAL;
+
+ if (ssi_active[SSI1_PORT]++) {
+ pr_debug("%s: exit before reset\n", __func__);
+ return 0;
+ }
+
+ /* SSI1 Reset */
+ SSI1_SCR = 0;
+
+ SSI1_SFCSR = SSI_SFCSR_RFWM1(RXFIFO_WATERMARK) |
+ SSI_SFCSR_RFWM0(RXFIFO_WATERMARK) |
+ SSI_SFCSR_TFWM1(TXFIFO_WATERMARK) |
+ SSI_SFCSR_TFWM0(TXFIFO_WATERMARK);
+ } else {
+
+ if (!ssi_clk1)
+ return -EINVAL;
+
+ if (ssi_active[SSI2_PORT]++) {
+ pr_debug("%s: exit before reset\n", __func__);
+ return 0;
+ }
+
+ /* SSI2 Reset */
+ SSI2_SCR = 0;
+
+ SSI2_SFCSR = SSI_SFCSR_RFWM1(RXFIFO_WATERMARK) |
+ SSI_SFCSR_RFWM0(RXFIFO_WATERMARK) |
+ SSI_SFCSR_TFWM1(TXFIFO_WATERMARK) |
+ SSI_SFCSR_TFWM0(TXFIFO_WATERMARK);
+ }
+
+ return 0;
+}
+
+int imx_ssi_hw_tx_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ u32 stccr, stcr, sier;
+
+ pr_debug("%s\n", __func__);
+
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+ stccr = SSI1_STCCR & ~SSI_STCCR_WL_MASK;
+ stcr = SSI1_STCR;
+ sier = SSI1_SIER;
+ } else {
+ stccr = SSI2_STCCR & ~SSI_STCCR_WL_MASK;
+ stcr = SSI2_STCR;
+ sier = SSI2_SIER;
+ }
+
+ /* DAI data (word) size */
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ stccr |= SSI_STCCR_WL(16);
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ stccr |= SSI_STCCR_WL(20);
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ stccr |= SSI_STCCR_WL(24);
+ break;
+ }
+
+ /* enable interrupts */
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2)
+ stcr |= SSI_STCR_TFEN0;
+ else
+ stcr |= SSI_STCR_TFEN1;
+ sier |= SSI_SIER_TDMAE;
+
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+ SSI1_STCR = stcr;
+ SSI1_STCCR = stccr;
+ SSI1_SIER = sier;
+ } else {
+ SSI2_STCR = stcr;
+ SSI2_STCCR = stccr;
+ SSI2_SIER = sier;
+ }
+
+ return 0;
+}
+
+int imx_ssi_hw_rx_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ u32 srccr, srcr, sier;
+
+ pr_debug("%s\n", __func__);
+
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+ srccr = SSI1_SRCCR & ~SSI_SRCCR_WL_MASK;
+ srcr = SSI1_SRCR;
+ sier = SSI1_SIER;
+ } else {
+ srccr = SSI2_SRCCR & ~SSI_SRCCR_WL_MASK;
+ srcr = SSI2_SRCR;
+ sier = SSI2_SIER;
+ }
+
+ /* DAI data (word) size */
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ srccr |= SSI_SRCCR_WL(16);
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ srccr |= SSI_SRCCR_WL(20);
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ srccr |= SSI_SRCCR_WL(24);
+ break;
+ }
+
+ /* enable interrupts */
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2)
+ srcr |= SSI_SRCR_RFEN0;
+ else
+ srcr |= SSI_SRCR_RFEN1;
+ sier |= SSI_SIER_RDMAE;
+
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+ SSI1_SRCR = srcr;
+ SSI1_SRCCR = srccr;
+ SSI1_SIER = sier;
+ } else {
+ SSI2_SRCR = srcr;
+ SSI2_SRCCR = srccr;
+ SSI2_SIER = sier;
+ }
+
+ return 0;
+}
+
+/*
+ * Should only be called when port is inactive (i.e. SSIEN = 0),
+ * although can be called multiple times by upper layers.
+ */
+int imx_ssi_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+
+ int ret;
+
+ /* cant change any parameters when SSI is running */
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+ if (SSI1_SCR & SSI_SCR_SSIEN) {
+ printk(KERN_WARNING "Warning ssi already enabled\n");
+ return 0;
+ }
+ } else {
+ if (SSI2_SCR & SSI_SCR_SSIEN) {
+ printk(KERN_WARNING "Warning ssi already enabled\n");
+ return 0;
+ }
+ }
+
+ /*
+ * Configure both tx and rx params with the same settings. This is
+ * really a harware restriction because SSI must be disabled until
+ * we can change those values. If there is an active audio stream in
+ * one direction, enabling the other direction with different
+ * settings would mean disturbing the running one.
+ */
+ ret = imx_ssi_hw_tx_params(substream, params);
+ if (ret < 0)
+ return ret;
+ return imx_ssi_hw_rx_params(substream, params);
+}
+
+int imx_ssi_prepare(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ int ret;
+
+ pr_debug("%s\n", __func__);
+
+ /* Enable clks here to follow SSI recommended init sequence */
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+ ret = clk_enable(ssi_clk0);
+ if (ret < 0)
+ printk(KERN_ERR "Unable to enable ssi_clk0\n");
+ } else {
+ ret = clk_enable(ssi_clk1);
+ if (ret < 0)
+ printk(KERN_ERR "Unable to enable ssi_clk1\n");
+ }
+
+ return 0;
+}
+
+static int imx_ssi_trigger(struct snd_pcm_substream *substream, int cmd,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ u32 scr;
+
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2)
+ scr = SSI1_SCR;
+ else
+ scr = SSI2_SCR;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_RESUME:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ scr |= SSI_SCR_TE | SSI_SCR_SSIEN;
+ else
+ scr |= SSI_SCR_RE | SSI_SCR_SSIEN;
+ break;
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ scr &= ~SSI_SCR_TE;
+ else
+ scr &= ~SSI_SCR_RE;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2)
+ SSI1_SCR = scr;
+ else
+ SSI2_SCR = scr;
+
+ return 0;
+}
+
+static void imx_ssi_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+
+ /* shutdown SSI if neither Tx or Rx is active */
+ if (!cpu_dai->active) {
+
+ if (cpu_dai->id == IMX_DAI_SSI0 ||
+ cpu_dai->id == IMX_DAI_SSI2) {
+
+ if (--ssi_active[SSI1_PORT] > 1)
+ return;
+
+ SSI1_SCR = 0;
+ clk_disable(ssi_clk0);
+ } else {
+ if (--ssi_active[SSI2_PORT])
+ return;
+ SSI2_SCR = 0;
+ clk_disable(ssi_clk1);
+ }
+ }
+}
+
+#ifdef CONFIG_PM
+static int imx_ssi_suspend(struct platform_device *dev,
+ struct snd_soc_dai *dai)
+{
+ return 0;
+}
+
+static int imx_ssi_resume(struct platform_device *pdev,
+ struct snd_soc_dai *dai)
+{
+ return 0;
+}
+
+#else
+#define imx_ssi_suspend NULL
+#define imx_ssi_resume NULL
+#endif
+
+#define IMX_SSI_RATES \
+ (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | \
+ SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | \
+ SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
+ SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | \
+ SNDRV_PCM_RATE_96000)
+
+#define IMX_SSI_BITS \
+ (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
+ SNDRV_PCM_FMTBIT_S24_LE)
+
+static struct snd_soc_dai_ops imx_ssi_pcm_dai_ops = {
+ .startup = imx_ssi_startup,
+ .shutdown = imx_ssi_shutdown,
+ .trigger = imx_ssi_trigger,
+ .prepare = imx_ssi_prepare,
+ .hw_params = imx_ssi_hw_params,
+ .set_sysclk = imx_ssi_set_dai_sysclk,
+ .set_clkdiv = imx_ssi_set_dai_clkdiv,
+ .set_fmt = imx_ssi_set_dai_fmt,
+ .set_tdm_slot = imx_ssi_set_dai_tdm_slot,
+};
+
+struct snd_soc_dai imx_ssi_pcm_dai[] = {
+{
+ .name = "imx-i2s-1-0",
+ .id = IMX_DAI_SSI0,
+ .suspend = imx_ssi_suspend,
+ .resume = imx_ssi_resume,
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .formats = IMX_SSI_BITS,
+ .rates = IMX_SSI_RATES,},
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .formats = IMX_SSI_BITS,
+ .rates = IMX_SSI_RATES,},
+ .ops = &imx_ssi_pcm_dai_ops,
+},
+{
+ .name = "imx-i2s-2-0",
+ .id = IMX_DAI_SSI1,
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .formats = IMX_SSI_BITS,
+ .rates = IMX_SSI_RATES,},
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .formats = IMX_SSI_BITS,
+ .rates = IMX_SSI_RATES,},
+ .ops = &imx_ssi_pcm_dai_ops,
+},
+{
+ .name = "imx-i2s-1-1",
+ .id = IMX_DAI_SSI2,
+ .suspend = imx_ssi_suspend,
+ .resume = imx_ssi_resume,
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .formats = IMX_SSI_BITS,
+ .rates = IMX_SSI_RATES,},
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .formats = IMX_SSI_BITS,
+ .rates = IMX_SSI_RATES,},
+ .ops = &imx_ssi_pcm_dai_ops,
+},
+{
+ .name = "imx-i2s-2-1",
+ .id = IMX_DAI_SSI3,
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .formats = IMX_SSI_BITS,
+ .rates = IMX_SSI_RATES,},
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .formats = IMX_SSI_BITS,
+ .rates = IMX_SSI_RATES,},
+ .ops = &imx_ssi_pcm_dai_ops,
+},
+};
+EXPORT_SYMBOL_GPL(imx_ssi_pcm_dai);
+
+static int __init imx_ssi_init(void)
+{
+ return snd_soc_register_dais(imx_ssi_pcm_dai,
+ ARRAY_SIZE(imx_ssi_pcm_dai));
+}
+
+static void __exit imx_ssi_exit(void)
+{
+ snd_soc_unregister_dais(imx_ssi_pcm_dai,
+ ARRAY_SIZE(imx_ssi_pcm_dai));
+}
+
+module_init(imx_ssi_init);
+module_exit(imx_ssi_exit);
+MODULE_AUTHOR("Liam Girdwood, liam.girdwood@wolfsonmicro.com");
+MODULE_DESCRIPTION("i.MX ASoC I2S driver");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _IMX_SSI_H
+#define _IMX_SSI_H
+
+#include <mach/hardware.h>
+
+/* SSI regs definition - MOVE to /arch/arm/plat-mxc/include/mach/ when stable */
+#define SSI1_IO_BASE_ADDR IO_ADDRESS(SSI1_BASE_ADDR)
+#define SSI2_IO_BASE_ADDR IO_ADDRESS(SSI2_BASE_ADDR)
+
+#define STX0 0x00
+#define STX1 0x04
+#define SRX0 0x08
+#define SRX1 0x0c
+#define SCR 0x10
+#define SISR 0x14
+#define SIER 0x18
+#define STCR 0x1c
+#define SRCR 0x20
+#define STCCR 0x24
+#define SRCCR 0x28
+#define SFCSR 0x2c
+#define STR 0x30
+#define SOR 0x34
+#define SACNT 0x38
+#define SACADD 0x3c
+#define SACDAT 0x40
+#define SATAG 0x44
+#define STMSK 0x48
+#define SRMSK 0x4c
+
+#define SSI1_STX0 (*((volatile u32 *)(SSI1_IO_BASE_ADDR + STX0)))
+#define SSI1_STX1 (*((volatile u32 *)(SSI1_IO_BASE_ADDR + STX1)))
+#define SSI1_SRX0 (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SRX0)))
+#define SSI1_SRX1 (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SRX1)))
+#define SSI1_SCR (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SCR)))
+#define SSI1_SISR (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SISR)))
+#define SSI1_SIER (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SIER)))
+#define SSI1_STCR (*((volatile u32 *)(SSI1_IO_BASE_ADDR + STCR)))
+#define SSI1_SRCR (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SRCR)))
+#define SSI1_STCCR (*((volatile u32 *)(SSI1_IO_BASE_ADDR + STCCR)))
+#define SSI1_SRCCR (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SRCCR)))
+#define SSI1_SFCSR (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SFCSR)))
+#define SSI1_STR (*((volatile u32 *)(SSI1_IO_BASE_ADDR + STR)))
+#define SSI1_SOR (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SOR)))
+#define SSI1_SACNT (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SACNT)))
+#define SSI1_SACADD (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SACADD)))
+#define SSI1_SACDAT (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SACDAT)))
+#define SSI1_SATAG (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SATAG)))
+#define SSI1_STMSK (*((volatile u32 *)(SSI1_IO_BASE_ADDR + STMSK)))
+#define SSI1_SRMSK (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SRMSK)))
+
+
+#define SSI2_STX0 (*((volatile u32 *)(SSI2_IO_BASE_ADDR + STX0)))
+#define SSI2_STX1 (*((volatile u32 *)(SSI2_IO_BASE_ADDR + STX1)))
+#define SSI2_SRX0 (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SRX0)))
+#define SSI2_SRX1 (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SRX1)))
+#define SSI2_SCR (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SCR)))
+#define SSI2_SISR (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SISR)))
+#define SSI2_SIER (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SIER)))
+#define SSI2_STCR (*((volatile u32 *)(SSI2_IO_BASE_ADDR + STCR)))
+#define SSI2_SRCR (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SRCR)))
+#define SSI2_STCCR (*((volatile u32 *)(SSI2_IO_BASE_ADDR + STCCR)))
+#define SSI2_SRCCR (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SRCCR)))
+#define SSI2_SFCSR (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SFCSR)))
+#define SSI2_STR (*((volatile u32 *)(SSI2_IO_BASE_ADDR + STR)))
+#define SSI2_SOR (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SOR)))
+#define SSI2_SACNT (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SACNT)))
+#define SSI2_SACADD (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SACADD)))
+#define SSI2_SACDAT (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SACDAT)))
+#define SSI2_SATAG (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SATAG)))
+#define SSI2_STMSK (*((volatile u32 *)(SSI2_IO_BASE_ADDR + STMSK)))
+#define SSI2_SRMSK (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SRMSK)))
+
+#define SSI_SCR_CLK_IST (1 << 9)
+#define SSI_SCR_TCH_EN (1 << 8)
+#define SSI_SCR_SYS_CLK_EN (1 << 7)
+#define SSI_SCR_I2S_MODE_NORM (0 << 5)
+#define SSI_SCR_I2S_MODE_MSTR (1 << 5)
+#define SSI_SCR_I2S_MODE_SLAVE (2 << 5)
+#define SSI_SCR_SYN (1 << 4)
+#define SSI_SCR_NET (1 << 3)
+#define SSI_SCR_RE (1 << 2)
+#define SSI_SCR_TE (1 << 1)
+#define SSI_SCR_SSIEN (1 << 0)
+
+#define SSI_SISR_CMDAU (1 << 18)
+#define SSI_SISR_CMDDU (1 << 17)
+#define SSI_SISR_RXT (1 << 16)
+#define SSI_SISR_RDR1 (1 << 15)
+#define SSI_SISR_RDR0 (1 << 14)
+#define SSI_SISR_TDE1 (1 << 13)
+#define SSI_SISR_TDE0 (1 << 12)
+#define SSI_SISR_ROE1 (1 << 11)
+#define SSI_SISR_ROE0 (1 << 10)
+#define SSI_SISR_TUE1 (1 << 9)
+#define SSI_SISR_TUE0 (1 << 8)
+#define SSI_SISR_TFS (1 << 7)
+#define SSI_SISR_RFS (1 << 6)
+#define SSI_SISR_TLS (1 << 5)
+#define SSI_SISR_RLS (1 << 4)
+#define SSI_SISR_RFF1 (1 << 3)
+#define SSI_SISR_RFF0 (1 << 2)
+#define SSI_SISR_TFE1 (1 << 1)
+#define SSI_SISR_TFE0 (1 << 0)
+
+#define SSI_SIER_RDMAE (1 << 22)
+#define SSI_SIER_RIE (1 << 21)
+#define SSI_SIER_TDMAE (1 << 20)
+#define SSI_SIER_TIE (1 << 19)
+#define SSI_SIER_CMDAU_EN (1 << 18)
+#define SSI_SIER_CMDDU_EN (1 << 17)
+#define SSI_SIER_RXT_EN (1 << 16)
+#define SSI_SIER_RDR1_EN (1 << 15)
+#define SSI_SIER_RDR0_EN (1 << 14)
+#define SSI_SIER_TDE1_EN (1 << 13)
+#define SSI_SIER_TDE0_EN (1 << 12)
+#define SSI_SIER_ROE1_EN (1 << 11)
+#define SSI_SIER_ROE0_EN (1 << 10)
+#define SSI_SIER_TUE1_EN (1 << 9)
+#define SSI_SIER_TUE0_EN (1 << 8)
+#define SSI_SIER_TFS_EN (1 << 7)
+#define SSI_SIER_RFS_EN (1 << 6)
+#define SSI_SIER_TLS_EN (1 << 5)
+#define SSI_SIER_RLS_EN (1 << 4)
+#define SSI_SIER_RFF1_EN (1 << 3)
+#define SSI_SIER_RFF0_EN (1 << 2)
+#define SSI_SIER_TFE1_EN (1 << 1)
+#define SSI_SIER_TFE0_EN (1 << 0)
+
+#define SSI_STCR_TXBIT0 (1 << 9)
+#define SSI_STCR_TFEN1 (1 << 8)
+#define SSI_STCR_TFEN0 (1 << 7)
+#define SSI_STCR_TFDIR (1 << 6)
+#define SSI_STCR_TXDIR (1 << 5)
+#define SSI_STCR_TSHFD (1 << 4)
+#define SSI_STCR_TSCKP (1 << 3)
+#define SSI_STCR_TFSI (1 << 2)
+#define SSI_STCR_TFSL (1 << 1)
+#define SSI_STCR_TEFS (1 << 0)
+
+#define SSI_SRCR_RXBIT0 (1 << 9)
+#define SSI_SRCR_RFEN1 (1 << 8)
+#define SSI_SRCR_RFEN0 (1 << 7)
+#define SSI_SRCR_RFDIR (1 << 6)
+#define SSI_SRCR_RXDIR (1 << 5)
+#define SSI_SRCR_RSHFD (1 << 4)
+#define SSI_SRCR_RSCKP (1 << 3)
+#define SSI_SRCR_RFSI (1 << 2)
+#define SSI_SRCR_RFSL (1 << 1)
+#define SSI_SRCR_REFS (1 << 0)
+
+#define SSI_STCCR_DIV2 (1 << 18)
+#define SSI_STCCR_PSR (1 << 15)
+#define SSI_STCCR_WL(x) ((((x) - 2) >> 1) << 13)
+#define SSI_STCCR_DC(x) (((x) & 0x1f) << 8)
+#define SSI_STCCR_PM(x) (((x) & 0xff) << 0)
+#define SSI_STCCR_WL_MASK (0xf << 13)
+#define SSI_STCCR_DC_MASK (0x1f << 8)
+#define SSI_STCCR_PM_MASK (0xff << 0)
+
+#define SSI_SRCCR_DIV2 (1 << 18)
+#define SSI_SRCCR_PSR (1 << 15)
+#define SSI_SRCCR_WL(x) ((((x) - 2) >> 1) << 13)
+#define SSI_SRCCR_DC(x) (((x) & 0x1f) << 8)
+#define SSI_SRCCR_PM(x) (((x) & 0xff) << 0)
+#define SSI_SRCCR_WL_MASK (0xf << 13)
+#define SSI_SRCCR_DC_MASK (0x1f << 8)
+#define SSI_SRCCR_PM_MASK (0xff << 0)
+
+
+#define SSI_SFCSR_RFCNT1(x) (((x) & 0xf) << 28)
+#define SSI_SFCSR_TFCNT1(x) (((x) & 0xf) << 24)
+#define SSI_SFCSR_RFWM1(x) (((x) & 0xf) << 20)
+#define SSI_SFCSR_TFWM1(x) (((x) & 0xf) << 16)
+#define SSI_SFCSR_RFCNT0(x) (((x) & 0xf) << 12)
+#define SSI_SFCSR_TFCNT0(x) (((x) & 0xf) << 8)
+#define SSI_SFCSR_RFWM0(x) (((x) & 0xf) << 4)
+#define SSI_SFCSR_TFWM0(x) (((x) & 0xf) << 0)
+
+#define SSI_STR_TEST (1 << 15)
+#define SSI_STR_RCK2TCK (1 << 14)
+#define SSI_STR_RFS2TFS (1 << 13)
+#define SSI_STR_RXSTATE(x) (((x) & 0xf) << 8)
+#define SSI_STR_TXD2RXD (1 << 7)
+#define SSI_STR_TCK2RCK (1 << 6)
+#define SSI_STR_TFS2RFS (1 << 5)
+#define SSI_STR_TXSTATE(x) (((x) & 0xf) << 0)
+
+#define SSI_SOR_CLKOFF (1 << 6)
+#define SSI_SOR_RX_CLR (1 << 5)
+#define SSI_SOR_TX_CLR (1 << 4)
+#define SSI_SOR_INIT (1 << 3)
+#define SSI_SOR_WAIT(x) (((x) & 0x3) << 1)
+#define SSI_SOR_SYNRST (1 << 0)
+
+#define SSI_SACNT_FRDIV(x) (((x) & 0x3f) << 5)
+#define SSI_SACNT_WR (x << 4)
+#define SSI_SACNT_RD (x << 3)
+#define SSI_SACNT_TIF (x << 2)
+#define SSI_SACNT_FV (x << 1)
+#define SSI_SACNT_AC97EN (x << 0)
+
+/* Watermarks for FIFO's */
+#define TXFIFO_WATERMARK 0x4
+#define RXFIFO_WATERMARK 0x4
+
+/* i.MX DAI SSP ID's */
+#define IMX_DAI_SSI0 0 /* SSI1 FIFO 0 */
+#define IMX_DAI_SSI1 1 /* SSI1 FIFO 1 */
+#define IMX_DAI_SSI2 2 /* SSI2 FIFO 0 */
+#define IMX_DAI_SSI3 3 /* SSI2 FIFO 1 */
+
+/* SSI clock sources */
+#define IMX_SSP_SYS_CLK 0
+
+/* SSI audio dividers */
+#define IMX_SSI_TX_DIV_2 0
+#define IMX_SSI_TX_DIV_PSR 1
+#define IMX_SSI_TX_DIV_PM 2
+#define IMX_SSI_RX_DIV_2 3
+#define IMX_SSI_RX_DIV_PSR 4
+#define IMX_SSI_RX_DIV_PM 5
+
+
+/* SSI Div 2 */
+#define IMX_SSI_DIV_2_OFF (~SSI_STCCR_DIV2)
+#define IMX_SSI_DIV_2_ON SSI_STCCR_DIV2
+
+extern struct snd_soc_dai imx_ssi_pcm_dai[4];
+extern int get_ssi_clk(int ssi, struct device *dev);
+extern void put_ssi_clk(int ssi);
+#endif
help
Say Y if you want to add support for SoC audio on Nokia N810.
+config SND_OMAP_SOC_AMS_DELTA
+ tristate "SoC Audio support for Amstrad E3 (Delta) videophone"
+ depends on SND_OMAP_SOC && MACH_AMS_DELTA
+ select SND_OMAP_SOC_MCBSP
+ select SND_SOC_CX20442
+ help
+ Say Y if you want to add support for SoC audio on Amstrad Delta.
+
config SND_OMAP_SOC_OSK5912
tristate "SoC Audio support for omap osk5912"
depends on SND_OMAP_SOC && MACH_OMAP_OSK && I2C
help
Say Y if you want to add support for SoC audio on the Beagleboard.
+config SND_OMAP_SOC_ZOOM2
+ tristate "SoC Audio support for Zoom2"
+ depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP_ZOOM2
+ select SND_OMAP_SOC_MCBSP
+ select SND_SOC_TWL4030
+ help
+ Say Y if you want to add support for Soc audio on Zoom2 board.
# OMAP Machine Support
snd-soc-n810-objs := n810.o
+snd-soc-ams-delta-objs := ams-delta.o
snd-soc-osk5912-objs := osk5912.o
snd-soc-overo-objs := overo.o
snd-soc-omap2evm-objs := omap2evm.o
snd-soc-sdp3430-objs := sdp3430.o
snd-soc-omap3pandora-objs := omap3pandora.o
snd-soc-omap3beagle-objs := omap3beagle.o
+snd-soc-zoom2-objs := zoom2.o
obj-$(CONFIG_SND_OMAP_SOC_N810) += snd-soc-n810.o
+obj-$(CONFIG_SND_OMAP_SOC_AMS_DELTA) += snd-soc-ams-delta.o
obj-$(CONFIG_SND_OMAP_SOC_OSK5912) += snd-soc-osk5912.o
obj-$(CONFIG_SND_OMAP_SOC_OVERO) += snd-soc-overo.o
obj-$(CONFIG_MACH_OMAP2EVM) += snd-soc-omap2evm.o
obj-$(CONFIG_SND_OMAP_SOC_SDP3430) += snd-soc-sdp3430.o
obj-$(CONFIG_SND_OMAP_SOC_OMAP3_PANDORA) += snd-soc-omap3pandora.o
obj-$(CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE) += snd-soc-omap3beagle.o
+obj-$(CONFIG_SND_OMAP_SOC_ZOOM2) += snd-soc-zoom2.o
--- /dev/null
+/*
+ * ams-delta.c -- SoC audio for Amstrad E3 (Delta) videophone
+ *
+ * Copyright (C) 2009 Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
+ *
+ * Initially based on sound/soc/omap/osk5912.x
+ * Copyright (C) 2008 Mistral Solutions
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/gpio.h>
+#include <linux/spinlock.h>
+#include <linux/tty.h>
+
+#include <sound/soc-dapm.h>
+#include <sound/jack.h>
+
+#include <asm/mach-types.h>
+
+#include <mach/board-ams-delta.h>
+#include <mach/mcbsp.h>
+
+#include "omap-mcbsp.h"
+#include "omap-pcm.h"
+#include "../codecs/cx20442.h"
+
+
+/* Board specific DAPM widgets */
+ const struct snd_soc_dapm_widget ams_delta_dapm_widgets[] = {
+ /* Handset */
+ SND_SOC_DAPM_MIC("Mouthpiece", NULL),
+ SND_SOC_DAPM_HP("Earpiece", NULL),
+ /* Handsfree/Speakerphone */
+ SND_SOC_DAPM_MIC("Microphone", NULL),
+ SND_SOC_DAPM_SPK("Speaker", NULL),
+};
+
+/* How they are connected to codec pins */
+static const struct snd_soc_dapm_route ams_delta_audio_map[] = {
+ {"TELIN", NULL, "Mouthpiece"},
+ {"Earpiece", NULL, "TELOUT"},
+
+ {"MIC", NULL, "Microphone"},
+ {"Speaker", NULL, "SPKOUT"},
+};
+
+/*
+ * Controls, functional after the modem line discipline is activated.
+ */
+
+/* Virtual switch: audio input/output constellations */
+static const char *ams_delta_audio_mode[] =
+ {"Mixed", "Handset", "Handsfree", "Speakerphone"};
+
+/* Selection <-> pin translation */
+#define AMS_DELTA_MOUTHPIECE 0
+#define AMS_DELTA_EARPIECE 1
+#define AMS_DELTA_MICROPHONE 2
+#define AMS_DELTA_SPEAKER 3
+#define AMS_DELTA_AGC 4
+
+#define AMS_DELTA_MIXED ((1 << AMS_DELTA_EARPIECE) | \
+ (1 << AMS_DELTA_MICROPHONE))
+#define AMS_DELTA_HANDSET ((1 << AMS_DELTA_MOUTHPIECE) | \
+ (1 << AMS_DELTA_EARPIECE))
+#define AMS_DELTA_HANDSFREE ((1 << AMS_DELTA_MICROPHONE) | \
+ (1 << AMS_DELTA_SPEAKER))
+#define AMS_DELTA_SPEAKERPHONE (AMS_DELTA_HANDSFREE | (1 << AMS_DELTA_AGC))
+
+unsigned short ams_delta_audio_mode_pins[] = {
+ AMS_DELTA_MIXED,
+ AMS_DELTA_HANDSET,
+ AMS_DELTA_HANDSFREE,
+ AMS_DELTA_SPEAKERPHONE,
+};
+
+static unsigned short ams_delta_audio_agc;
+
+static int ams_delta_set_audio_mode(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct soc_enum *control = (struct soc_enum *)kcontrol->private_value;
+ unsigned short pins;
+ int pin, changed = 0;
+
+ /* Refuse any mode changes if we are not able to control the codec. */
+ if (!codec->control_data)
+ return -EUNATCH;
+
+ if (ucontrol->value.enumerated.item[0] >= control->max)
+ return -EINVAL;
+
+ mutex_lock(&codec->mutex);
+
+ /* Translate selection to bitmap */
+ pins = ams_delta_audio_mode_pins[ucontrol->value.enumerated.item[0]];
+
+ /* Setup pins after corresponding bits if changed */
+ pin = !!(pins & (1 << AMS_DELTA_MOUTHPIECE));
+ if (pin != snd_soc_dapm_get_pin_status(codec, "Mouthpiece")) {
+ changed = 1;
+ if (pin)
+ snd_soc_dapm_enable_pin(codec, "Mouthpiece");
+ else
+ snd_soc_dapm_disable_pin(codec, "Mouthpiece");
+ }
+ pin = !!(pins & (1 << AMS_DELTA_EARPIECE));
+ if (pin != snd_soc_dapm_get_pin_status(codec, "Earpiece")) {
+ changed = 1;
+ if (pin)
+ snd_soc_dapm_enable_pin(codec, "Earpiece");
+ else
+ snd_soc_dapm_disable_pin(codec, "Earpiece");
+ }
+ pin = !!(pins & (1 << AMS_DELTA_MICROPHONE));
+ if (pin != snd_soc_dapm_get_pin_status(codec, "Microphone")) {
+ changed = 1;
+ if (pin)
+ snd_soc_dapm_enable_pin(codec, "Microphone");
+ else
+ snd_soc_dapm_disable_pin(codec, "Microphone");
+ }
+ pin = !!(pins & (1 << AMS_DELTA_SPEAKER));
+ if (pin != snd_soc_dapm_get_pin_status(codec, "Speaker")) {
+ changed = 1;
+ if (pin)
+ snd_soc_dapm_enable_pin(codec, "Speaker");
+ else
+ snd_soc_dapm_disable_pin(codec, "Speaker");
+ }
+ pin = !!(pins & (1 << AMS_DELTA_AGC));
+ if (pin != ams_delta_audio_agc) {
+ ams_delta_audio_agc = pin;
+ changed = 1;
+ if (pin)
+ snd_soc_dapm_enable_pin(codec, "AGCIN");
+ else
+ snd_soc_dapm_disable_pin(codec, "AGCIN");
+ }
+ if (changed)
+ snd_soc_dapm_sync(codec);
+
+ mutex_unlock(&codec->mutex);
+
+ return changed;
+}
+
+static int ams_delta_get_audio_mode(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ unsigned short pins, mode;
+
+ pins = ((snd_soc_dapm_get_pin_status(codec, "Mouthpiece") <<
+ AMS_DELTA_MOUTHPIECE) |
+ (snd_soc_dapm_get_pin_status(codec, "Earpiece") <<
+ AMS_DELTA_EARPIECE));
+ if (pins)
+ pins |= (snd_soc_dapm_get_pin_status(codec, "Microphone") <<
+ AMS_DELTA_MICROPHONE);
+ else
+ pins = ((snd_soc_dapm_get_pin_status(codec, "Microphone") <<
+ AMS_DELTA_MICROPHONE) |
+ (snd_soc_dapm_get_pin_status(codec, "Speaker") <<
+ AMS_DELTA_SPEAKER) |
+ (ams_delta_audio_agc << AMS_DELTA_AGC));
+
+ for (mode = 0; mode < ARRAY_SIZE(ams_delta_audio_mode); mode++)
+ if (pins == ams_delta_audio_mode_pins[mode])
+ break;
+
+ if (mode >= ARRAY_SIZE(ams_delta_audio_mode))
+ return -EINVAL;
+
+ ucontrol->value.enumerated.item[0] = mode;
+
+ return 0;
+}
+
+static const struct soc_enum ams_delta_audio_enum[] = {
+ SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(ams_delta_audio_mode),
+ ams_delta_audio_mode),
+};
+
+static const struct snd_kcontrol_new ams_delta_audio_controls[] = {
+ SOC_ENUM_EXT("Audio Mode", ams_delta_audio_enum[0],
+ ams_delta_get_audio_mode, ams_delta_set_audio_mode),
+};
+
+/* Hook switch */
+static struct snd_soc_jack ams_delta_hook_switch;
+static struct snd_soc_jack_gpio ams_delta_hook_switch_gpios[] = {
+ {
+ .gpio = 4,
+ .name = "hook_switch",
+ .report = SND_JACK_HEADSET,
+ .invert = 1,
+ .debounce_time = 150,
+ }
+};
+
+/* After we are able to control the codec over the modem,
+ * the hook switch can be used for dynamic DAPM reconfiguration. */
+static struct snd_soc_jack_pin ams_delta_hook_switch_pins[] = {
+ /* Handset */
+ {
+ .pin = "Mouthpiece",
+ .mask = SND_JACK_MICROPHONE,
+ },
+ {
+ .pin = "Earpiece",
+ .mask = SND_JACK_HEADPHONE,
+ },
+ /* Handsfree */
+ {
+ .pin = "Microphone",
+ .mask = SND_JACK_MICROPHONE,
+ .invert = 1,
+ },
+ {
+ .pin = "Speaker",
+ .mask = SND_JACK_HEADPHONE,
+ .invert = 1,
+ },
+};
+
+
+/*
+ * Modem line discipline, required for making above controls functional.
+ * Activated from userspace with ldattach, possibly invoked from udev rule.
+ */
+
+/* To actually apply any modem controlled configuration changes to the codec,
+ * we must connect codec DAI pins to the modem for a moment. Be carefull not
+ * to interfere with our digital mute function that shares the same hardware. */
+static struct timer_list cx81801_timer;
+static bool cx81801_cmd_pending;
+static bool ams_delta_muted;
+static DEFINE_SPINLOCK(ams_delta_lock);
+
+static void cx81801_timeout(unsigned long data)
+{
+ int muted;
+
+ spin_lock(&ams_delta_lock);
+ cx81801_cmd_pending = 0;
+ muted = ams_delta_muted;
+ spin_unlock(&ams_delta_lock);
+
+ /* Reconnect the codec DAI back from the modem to the CPU DAI
+ * only if digital mute still off */
+ if (!muted)
+ ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_CODEC, 0);
+}
+
+/* Line discipline .open() */
+static int cx81801_open(struct tty_struct *tty)
+{
+ return v253_ops.open(tty);
+}
+
+/* Line discipline .close() */
+static void cx81801_close(struct tty_struct *tty)
+{
+ struct snd_soc_codec *codec = tty->disc_data;
+
+ del_timer_sync(&cx81801_timer);
+
+ v253_ops.close(tty);
+
+ /* Prevent the hook switch from further changing the DAPM pins */
+ INIT_LIST_HEAD(&ams_delta_hook_switch.pins);
+
+ /* Revert back to default audio input/output constellation */
+ snd_soc_dapm_disable_pin(codec, "Mouthpiece");
+ snd_soc_dapm_enable_pin(codec, "Earpiece");
+ snd_soc_dapm_enable_pin(codec, "Microphone");
+ snd_soc_dapm_disable_pin(codec, "Speaker");
+ snd_soc_dapm_disable_pin(codec, "AGCIN");
+ snd_soc_dapm_sync(codec);
+}
+
+/* Line discipline .hangup() */
+static int cx81801_hangup(struct tty_struct *tty)
+{
+ cx81801_close(tty);
+ return 0;
+}
+
+/* Line discipline .recieve_buf() */
+static void cx81801_receive(struct tty_struct *tty,
+ const unsigned char *cp, char *fp, int count)
+{
+ struct snd_soc_codec *codec = tty->disc_data;
+ const unsigned char *c;
+ int apply, ret;
+
+ if (!codec->control_data) {
+ /* First modem response, complete setup procedure */
+
+ /* Initialize timer used for config pulse generation */
+ setup_timer(&cx81801_timer, cx81801_timeout, 0);
+
+ v253_ops.receive_buf(tty, cp, fp, count);
+
+ /* Link hook switch to DAPM pins */
+ ret = snd_soc_jack_add_pins(&ams_delta_hook_switch,
+ ARRAY_SIZE(ams_delta_hook_switch_pins),
+ ams_delta_hook_switch_pins);
+ if (ret)
+ dev_warn(codec->socdev->card->dev,
+ "Failed to link hook switch to DAPM pins, "
+ "will continue with hook switch unlinked.\n");
+
+ return;
+ }
+
+ v253_ops.receive_buf(tty, cp, fp, count);
+
+ for (c = &cp[count - 1]; c >= cp; c--) {
+ if (*c != '\r')
+ continue;
+ /* Complete modem response received, apply config to codec */
+
+ spin_lock_bh(&ams_delta_lock);
+ mod_timer(&cx81801_timer, jiffies + msecs_to_jiffies(150));
+ apply = !ams_delta_muted && !cx81801_cmd_pending;
+ cx81801_cmd_pending = 1;
+ spin_unlock_bh(&ams_delta_lock);
+
+ /* Apply config pulse by connecting the codec to the modem
+ * if not already done */
+ if (apply)
+ ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_CODEC,
+ AMS_DELTA_LATCH2_MODEM_CODEC);
+ break;
+ }
+}
+
+/* Line discipline .write_wakeup() */
+static void cx81801_wakeup(struct tty_struct *tty)
+{
+ v253_ops.write_wakeup(tty);
+}
+
+static struct tty_ldisc_ops cx81801_ops = {
+ .magic = TTY_LDISC_MAGIC,
+ .name = "cx81801",
+ .owner = THIS_MODULE,
+ .open = cx81801_open,
+ .close = cx81801_close,
+ .hangup = cx81801_hangup,
+ .receive_buf = cx81801_receive,
+ .write_wakeup = cx81801_wakeup,
+};
+
+
+/*
+ * Even if not very usefull, the sound card can still work without any of the
+ * above functonality activated. You can still control its audio input/output
+ * constellation and speakerphone gain from userspace by issueing AT commands
+ * over the modem port.
+ */
+
+static int ams_delta_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+
+ /* Set cpu DAI configuration */
+ return snd_soc_dai_set_fmt(rtd->dai->cpu_dai,
+ SND_SOC_DAIFMT_DSP_A |
+ SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM);
+}
+
+static struct snd_soc_ops ams_delta_ops = {
+ .hw_params = ams_delta_hw_params,
+};
+
+
+/* Board specific codec bias level control */
+static int ams_delta_set_bias_level(struct snd_soc_card *card,
+ enum snd_soc_bias_level level)
+{
+ struct snd_soc_codec *codec = card->codec;
+
+ switch (level) {
+ case SND_SOC_BIAS_ON:
+ case SND_SOC_BIAS_PREPARE:
+ case SND_SOC_BIAS_STANDBY:
+ if (codec->bias_level == SND_SOC_BIAS_OFF)
+ ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_NRESET,
+ AMS_DELTA_LATCH2_MODEM_NRESET);
+ break;
+ case SND_SOC_BIAS_OFF:
+ if (codec->bias_level != SND_SOC_BIAS_OFF)
+ ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_NRESET,
+ 0);
+ }
+ codec->bias_level = level;
+
+ return 0;
+}
+
+/* Digital mute implemented using modem/CPU multiplexer.
+ * Shares hardware with codec config pulse generation */
+static bool ams_delta_muted = 1;
+
+static int ams_delta_digital_mute(struct snd_soc_dai *dai, int mute)
+{
+ int apply;
+
+ if (ams_delta_muted == mute)
+ return 0;
+
+ spin_lock_bh(&ams_delta_lock);
+ ams_delta_muted = mute;
+ apply = !cx81801_cmd_pending;
+ spin_unlock_bh(&ams_delta_lock);
+
+ if (apply)
+ ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_CODEC,
+ mute ? AMS_DELTA_LATCH2_MODEM_CODEC : 0);
+ return 0;
+}
+
+/* Our codec DAI probably doesn't have its own .ops structure */
+static struct snd_soc_dai_ops ams_delta_dai_ops = {
+ .digital_mute = ams_delta_digital_mute,
+};
+
+/* Will be used if the codec ever has its own digital_mute function */
+static int ams_delta_startup(struct snd_pcm_substream *substream)
+{
+ return ams_delta_digital_mute(NULL, 0);
+}
+
+static void ams_delta_shutdown(struct snd_pcm_substream *substream)
+{
+ ams_delta_digital_mute(NULL, 1);
+}
+
+
+/*
+ * Card initialization
+ */
+
+static int ams_delta_cx20442_init(struct snd_soc_codec *codec)
+{
+ struct snd_soc_dai *codec_dai = codec->dai;
+ struct snd_soc_card *card = codec->socdev->card;
+ int ret;
+ /* Codec is ready, now add/activate board specific controls */
+
+ /* Set up digital mute if not provided by the codec */
+ if (!codec_dai->ops) {
+ codec_dai->ops = &ams_delta_dai_ops;
+ } else if (!codec_dai->ops->digital_mute) {
+ codec_dai->ops->digital_mute = ams_delta_digital_mute;
+ } else {
+ ams_delta_ops.startup = ams_delta_startup;
+ ams_delta_ops.shutdown = ams_delta_shutdown;
+ }
+
+ /* Set codec bias level */
+ ams_delta_set_bias_level(card, SND_SOC_BIAS_STANDBY);
+
+ /* Add hook switch - can be used to control the codec from userspace
+ * even if line discipline fails */
+ ret = snd_soc_jack_new(card, "hook_switch",
+ SND_JACK_HEADSET, &ams_delta_hook_switch);
+ if (ret)
+ dev_warn(card->dev,
+ "Failed to allocate resources for hook switch, "
+ "will continue without one.\n");
+ else {
+ ret = snd_soc_jack_add_gpios(&ams_delta_hook_switch,
+ ARRAY_SIZE(ams_delta_hook_switch_gpios),
+ ams_delta_hook_switch_gpios);
+ if (ret)
+ dev_warn(card->dev,
+ "Failed to set up hook switch GPIO line, "
+ "will continue with hook switch inactive.\n");
+ }
+
+ /* Register optional line discipline for over the modem control */
+ ret = tty_register_ldisc(N_V253, &cx81801_ops);
+ if (ret) {
+ dev_warn(card->dev,
+ "Failed to register line discipline, "
+ "will continue without any controls.\n");
+ return 0;
+ }
+
+ /* Add board specific DAPM widgets and routes */
+ ret = snd_soc_dapm_new_controls(codec, ams_delta_dapm_widgets,
+ ARRAY_SIZE(ams_delta_dapm_widgets));
+ if (ret) {
+ dev_warn(card->dev,
+ "Failed to register DAPM controls, "
+ "will continue without any.\n");
+ return 0;
+ }
+
+ ret = snd_soc_dapm_add_routes(codec, ams_delta_audio_map,
+ ARRAY_SIZE(ams_delta_audio_map));
+ if (ret) {
+ dev_warn(card->dev,
+ "Failed to set up DAPM routes, "
+ "will continue with codec default map.\n");
+ return 0;
+ }
+
+ /* Set up initial pin constellation */
+ snd_soc_dapm_disable_pin(codec, "Mouthpiece");
+ snd_soc_dapm_enable_pin(codec, "Earpiece");
+ snd_soc_dapm_enable_pin(codec, "Microphone");
+ snd_soc_dapm_disable_pin(codec, "Speaker");
+ snd_soc_dapm_disable_pin(codec, "AGCIN");
+ snd_soc_dapm_disable_pin(codec, "AGCOUT");
+ snd_soc_dapm_sync(codec);
+
+ /* Add virtual switch */
+ ret = snd_soc_add_controls(codec, ams_delta_audio_controls,
+ ARRAY_SIZE(ams_delta_audio_controls));
+ if (ret)
+ dev_warn(card->dev,
+ "Failed to register audio mode control, "
+ "will continue without it.\n");
+
+ return 0;
+}
+
+/* DAI glue - connects codec <--> CPU */
+static struct snd_soc_dai_link ams_delta_dai_link = {
+ .name = "CX20442",
+ .stream_name = "CX20442",
+ .cpu_dai = &omap_mcbsp_dai[0],
+ .codec_dai = &cx20442_dai,
+ .init = ams_delta_cx20442_init,
+ .ops = &ams_delta_ops,
+};
+
+/* Audio card driver */
+static struct snd_soc_card ams_delta_audio_card = {
+ .name = "AMS_DELTA",
+ .platform = &omap_soc_platform,
+ .dai_link = &ams_delta_dai_link,
+ .num_links = 1,
+ .set_bias_level = ams_delta_set_bias_level,
+};
+
+/* Audio subsystem */
+static struct snd_soc_device ams_delta_snd_soc_device = {
+ .card = &ams_delta_audio_card,
+ .codec_dev = &cx20442_codec_dev,
+};
+
+/* Module init/exit */
+static struct platform_device *ams_delta_audio_platform_device;
+static struct platform_device *cx20442_platform_device;
+
+static int __init ams_delta_module_init(void)
+{
+ int ret;
+
+ if (!(machine_is_ams_delta()))
+ return -ENODEV;
+
+ ams_delta_audio_platform_device =
+ platform_device_alloc("soc-audio", -1);
+ if (!ams_delta_audio_platform_device)
+ return -ENOMEM;
+
+ platform_set_drvdata(ams_delta_audio_platform_device,
+ &ams_delta_snd_soc_device);
+ ams_delta_snd_soc_device.dev = &ams_delta_audio_platform_device->dev;
+ *(unsigned int *)ams_delta_dai_link.cpu_dai->private_data = OMAP_MCBSP1;
+
+ ret = platform_device_add(ams_delta_audio_platform_device);
+ if (ret)
+ goto err;
+
+ /*
+ * Codec platform device could be registered from elsewhere (board?),
+ * but I do it here as it makes sense only if used with the card.
+ */
+ cx20442_platform_device = platform_device_register_simple("cx20442",
+ -1, NULL, 0);
+ return 0;
+err:
+ platform_device_put(ams_delta_audio_platform_device);
+ return ret;
+}
+module_init(ams_delta_module_init);
+
+static void __exit ams_delta_module_exit(void)
+{
+ struct snd_soc_codec *codec;
+ struct tty_struct *tty;
+
+ if (ams_delta_audio_card.codec) {
+ codec = ams_delta_audio_card.codec;
+
+ if (codec->control_data) {
+ tty = codec->control_data;
+
+ tty_hangup(tty);
+ }
+ }
+
+ if (tty_unregister_ldisc(N_V253) != 0)
+ dev_warn(&ams_delta_audio_platform_device->dev,
+ "failed to unregister V253 line discipline\n");
+
+ snd_soc_jack_free_gpios(&ams_delta_hook_switch,
+ ARRAY_SIZE(ams_delta_hook_switch_gpios),
+ ams_delta_hook_switch_gpios);
+
+ /* Keep modem power on */
+ ams_delta_set_bias_level(&ams_delta_audio_card, SND_SOC_BIAS_STANDBY);
+
+ platform_device_unregister(cx20442_platform_device);
+ platform_device_unregister(ams_delta_audio_platform_device);
+}
+module_exit(ams_delta_module_exit);
+
+MODULE_AUTHOR("Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>");
+MODULE_DESCRIPTION("ALSA SoC driver for Amstrad E3 (Delta) videophone");
+MODULE_LICENSE("GPL");
*/
#include <linux/clk.h>
+#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <sound/core.h>
#include <sound/pcm.h>
/* Audio private data */
static struct aic3x_setup_data n810_aic33_setup = {
- .i2c_bus = 2,
- .i2c_address = 0x18,
.gpio_func[0] = AIC3X_GPIO1_FUNC_DISABLED,
.gpio_func[1] = AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT,
};
static struct platform_device *n810_snd_device;
+/* temporary i2c device creation until this can be moved into the machine
+ * support file.
+*/
+static struct i2c_board_info i2c_device[] = {
+ { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }
+};
+
static int __init n810_soc_init(void)
{
int err;
if (!(machine_is_nokia_n810() || machine_is_nokia_n810_wimax()))
return -ENODEV;
+ i2c_register_board_info(1, i2c_device, ARRAY_SIZE(i2c_device));
+
n810_snd_device = platform_device_alloc("soc-audio", -1);
if (!n810_snd_device)
return -ENOMEM;
static const unsigned long omap34xx_mcbsp_port[][2] = {};
#endif
+static void omap_mcbsp_set_threshold(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ struct omap_mcbsp_data *mcbsp_data = to_mcbsp(cpu_dai->private_data);
+ int dma_op_mode = omap_mcbsp_get_dma_op_mode(mcbsp_data->bus_id);
+ int samples;
+
+ /* TODO: Currently, MODE_ELEMENT == MODE_FRAME */
+ if (dma_op_mode == MCBSP_DMA_MODE_THRESHOLD)
+ samples = snd_pcm_lib_period_bytes(substream) >> 1;
+ else
+ samples = 1;
+
+ /* Configure McBSP internal buffer usage */
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ omap_mcbsp_set_tx_threshold(mcbsp_data->bus_id, samples - 1);
+ else
+ omap_mcbsp_set_rx_threshold(mcbsp_data->bus_id, samples - 1);
+}
+
static int omap_mcbsp_dai_startup(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
struct omap_mcbsp_data *mcbsp_data = to_mcbsp(cpu_dai->private_data);
+ int bus_id = mcbsp_data->bus_id;
int err = 0;
- if (cpu_is_omap343x() && mcbsp_data->bus_id == 1) {
+ if (!cpu_dai->active)
+ err = omap_mcbsp_request(bus_id);
+
+ if (cpu_is_omap343x()) {
+ int dma_op_mode = omap_mcbsp_get_dma_op_mode(bus_id);
+ int max_period;
+
/*
* McBSP2 in OMAP3 has 1024 * 32-bit internal audio buffer.
* Set constraint for minimum buffer size to the same than FIFO
* size in order to avoid underruns in playback startup because
* HW is keeping the DMA request active until FIFO is filled.
*/
- snd_pcm_hw_constraint_minmax(substream->runtime,
- SNDRV_PCM_HW_PARAM_BUFFER_BYTES, 4096, UINT_MAX);
- }
+ if (bus_id == 1)
+ snd_pcm_hw_constraint_minmax(substream->runtime,
+ SNDRV_PCM_HW_PARAM_BUFFER_BYTES,
+ 4096, UINT_MAX);
- if (!cpu_dai->active)
- err = omap_mcbsp_request(mcbsp_data->bus_id);
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ max_period = omap_mcbsp_get_max_tx_threshold(bus_id);
+ else
+ max_period = omap_mcbsp_get_max_rx_threshold(bus_id);
+
+ max_period++;
+ max_period <<= 1;
+
+ if (dma_op_mode == MCBSP_DMA_MODE_THRESHOLD)
+ snd_pcm_hw_constraint_minmax(substream->runtime,
+ SNDRV_PCM_HW_PARAM_PERIOD_BYTES,
+ 32, max_period);
+ }
return err;
}
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
struct omap_mcbsp_data *mcbsp_data = to_mcbsp(cpu_dai->private_data);
- int err = 0;
+ int err = 0, play = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK);
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- if (!mcbsp_data->active++)
- omap_mcbsp_start(mcbsp_data->bus_id);
+ mcbsp_data->active++;
+ omap_mcbsp_start(mcbsp_data->bus_id, play, !play);
break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- if (!--mcbsp_data->active)
- omap_mcbsp_stop(mcbsp_data->bus_id);
+ omap_mcbsp_stop(mcbsp_data->bus_id, play, !play);
+ mcbsp_data->active--;
break;
default:
err = -EINVAL;
struct omap_mcbsp_data *mcbsp_data = to_mcbsp(cpu_dai->private_data);
struct omap_mcbsp_reg_cfg *regs = &mcbsp_data->regs;
int dma, bus_id = mcbsp_data->bus_id, id = cpu_dai->id;
- int wlen, channels, wpf;
+ int wlen, channels, wpf, sync_mode = OMAP_DMA_SYNC_ELEMENT;
unsigned long port;
unsigned int format;
} else if (cpu_is_omap343x()) {
dma = omap24xx_dma_reqs[bus_id][substream->stream];
port = omap34xx_mcbsp_port[bus_id][substream->stream];
+ omap_mcbsp_dai_dma_params[id][substream->stream].set_threshold =
+ omap_mcbsp_set_threshold;
+ /* TODO: Currently, MODE_ELEMENT == MODE_FRAME */
+ if (omap_mcbsp_get_dma_op_mode(bus_id) ==
+ MCBSP_DMA_MODE_THRESHOLD)
+ sync_mode = OMAP_DMA_SYNC_FRAME;
} else {
return -ENODEV;
}
substream->stream ? "Audio Capture" : "Audio Playback";
omap_mcbsp_dai_dma_params[id][substream->stream].dma_req = dma;
omap_mcbsp_dai_dma_params[id][substream->stream].port_addr = port;
+ omap_mcbsp_dai_dma_params[id][substream->stream].sync_mode = sync_mode;
cpu_dai->dma_data = &omap_mcbsp_dai_dma_params[id][substream->stream];
if (mcbsp_data->configured) {
/* Generic McBSP register settings */
regs->spcr2 |= XINTM(3) | FREE;
regs->spcr1 |= RINTM(3);
- regs->rcr2 |= RFIG;
- regs->xcr2 |= XFIG;
+ /* RFIG and XFIG are not defined in 34xx */
+ if (!cpu_is_omap34xx()) {
+ regs->rcr2 |= RFIG;
+ regs->xcr2 |= XFIG;
+ }
if (cpu_is_omap2430() || cpu_is_omap34xx()) {
- regs->xccr = DXENDLY(1) | XDMAEN;
- regs->rccr = RFULL_CYCLE | RDMAEN;
+ regs->xccr = DXENDLY(1) | XDMAEN | XDISABLE;
+ regs->rccr = RFULL_CYCLE | RDMAEN | RDISABLE;
}
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
return 0;
}
+static int omap_mcbsp_dai_set_rcvr_src(struct omap_mcbsp_data *mcbsp_data,
+ int clk_id)
+{
+ int sel_bit, set = 0;
+ u16 reg = OMAP2_CONTROL_DEVCONF0;
+
+ if (cpu_class_is_omap1())
+ return -EINVAL; /* TODO: Can this be implemented for OMAP1? */
+ if (mcbsp_data->bus_id != 0)
+ return -EINVAL;
+
+ switch (clk_id) {
+ case OMAP_MCBSP_CLKR_SRC_CLKX:
+ set = 1;
+ case OMAP_MCBSP_CLKR_SRC_CLKR:
+ sel_bit = 3;
+ break;
+ case OMAP_MCBSP_FSR_SRC_FSX:
+ set = 1;
+ case OMAP_MCBSP_FSR_SRC_FSR:
+ sel_bit = 4;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (set)
+ omap_ctrl_writel(omap_ctrl_readl(reg) | (1 << sel_bit), reg);
+ else
+ omap_ctrl_writel(omap_ctrl_readl(reg) & ~(1 << sel_bit), reg);
+
+ return 0;
+}
+
static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
int clk_id, unsigned int freq,
int dir)
case OMAP_MCBSP_SYSCLK_CLKR_EXT:
regs->pcr0 |= SCLKME;
break;
+
+ case OMAP_MCBSP_CLKR_SRC_CLKR:
+ case OMAP_MCBSP_CLKR_SRC_CLKX:
+ case OMAP_MCBSP_FSR_SRC_FSR:
+ case OMAP_MCBSP_FSR_SRC_FSX:
+ err = omap_mcbsp_dai_set_rcvr_src(mcbsp_data, clk_id);
+ break;
default:
err = -ENODEV;
}
OMAP_MCBSP_SYSCLK_CLK, /* Internal ICLK */
OMAP_MCBSP_SYSCLK_CLKX_EXT, /* External CLKX pin */
OMAP_MCBSP_SYSCLK_CLKR_EXT, /* External CLKR pin */
+ OMAP_MCBSP_CLKR_SRC_CLKR, /* CLKR from CLKR pin */
+ OMAP_MCBSP_CLKR_SRC_CLKX, /* CLKR from CLKX pin */
+ OMAP_MCBSP_FSR_SRC_FSR, /* FSR from FSR pin */
+ OMAP_MCBSP_FSR_SRC_FSX, /* FSR from FSX pin */
};
/* McBSP dividers */
struct omap_runtime_data *prtd = runtime->private_data;
unsigned long flags;
- if (cpu_is_omap1510()) {
+ if ((cpu_is_omap1510()) &&
+ (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)) {
/*
- * OMAP1510 doesn't support DMA chaining so have to restart
- * the transfer after all periods are transferred
+ * OMAP1510 doesn't fully support DMA progress counter
+ * and there is no software emulation implemented yet,
+ * so have to maintain our own playback progress counter
+ * that can be used by omap_pcm_pointer() instead.
*/
spin_lock_irqsave(&prtd->lock, flags);
+ if ((stat == OMAP_DMA_LAST_IRQ) &&
+ (prtd->period_index == runtime->periods - 1)) {
+ /* we are in sync, do nothing */
+ spin_unlock_irqrestore(&prtd->lock, flags);
+ return;
+ }
if (prtd->period_index >= 0) {
- if (++prtd->period_index == runtime->periods) {
+ if (stat & OMAP_DMA_BLOCK_IRQ) {
+ /* end of buffer reached, loop back */
+ prtd->period_index = 0;
+ } else if (stat & OMAP_DMA_LAST_IRQ) {
+ /* update the counter for the last period */
+ prtd->period_index = runtime->periods - 1;
+ } else if (++prtd->period_index >= runtime->periods) {
+ /* end of buffer missed? loop back */
prtd->period_index = 0;
- omap_start_dma(prtd->dma_ch);
}
}
spin_unlock_irqrestore(&prtd->lock, flags);
prtd->dma_data = dma_data;
err = omap_request_dma(dma_data->dma_req, dma_data->name,
omap_pcm_dma_irq, substream, &prtd->dma_ch);
- if (!err && !cpu_is_omap1510()) {
+ if (!err) {
/*
* Link channel with itself so DMA doesn't need any
* reprogramming while looping the buffer
if (prtd->dma_data == NULL)
return 0;
- if (!cpu_is_omap1510())
- omap_dma_unlink_lch(prtd->dma_ch, prtd->dma_ch);
+ omap_dma_unlink_lch(prtd->dma_ch, prtd->dma_ch);
omap_free_dma(prtd->dma_ch);
prtd->dma_data = NULL;
*/
dma_params.data_type = OMAP_DMA_DATA_TYPE_S16;
dma_params.trigger = dma_data->dma_req;
- dma_params.sync_mode = OMAP_DMA_SYNC_ELEMENT;
+ dma_params.sync_mode = dma_data->sync_mode;
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
dma_params.src_amode = OMAP_DMA_AMODE_POST_INC;
dma_params.dst_amode = OMAP_DMA_AMODE_CONSTANT;
dma_params.frame_count = runtime->periods;
omap_set_dma_params(prtd->dma_ch, &dma_params);
- omap_enable_dma_irq(prtd->dma_ch, OMAP_DMA_FRAME_IRQ);
+ if ((cpu_is_omap1510()) &&
+ (substream->stream == SNDRV_PCM_STREAM_PLAYBACK))
+ omap_enable_dma_irq(prtd->dma_ch, OMAP_DMA_FRAME_IRQ |
+ OMAP_DMA_LAST_IRQ | OMAP_DMA_BLOCK_IRQ);
+ else
+ omap_enable_dma_irq(prtd->dma_ch, OMAP_DMA_FRAME_IRQ);
+
+ omap_set_dma_src_burst_mode(prtd->dma_ch, OMAP_DMA_DATA_BURST_16);
+ omap_set_dma_dest_burst_mode(prtd->dma_ch, OMAP_DMA_DATA_BURST_16);
return 0;
}
{
struct snd_pcm_runtime *runtime = substream->runtime;
struct omap_runtime_data *prtd = runtime->private_data;
+ struct omap_pcm_dma_data *dma_data = prtd->dma_data;
unsigned long flags;
int ret = 0;
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
prtd->period_index = 0;
+ /* Configure McBSP internal buffer usage */
+ if (dma_data->set_threshold)
+ dma_data->set_threshold(substream);
+
omap_start_dma(prtd->dma_ch);
break;
.mmap = omap_pcm_mmap,
};
-static u64 omap_pcm_dmamask = DMA_BIT_MASK(32);
+static u64 omap_pcm_dmamask = DMA_BIT_MASK(64);
static int omap_pcm_preallocate_dma_buffer(struct snd_pcm *pcm,
int stream)
}
}
-int omap_pcm_new(struct snd_card *card, struct snd_soc_dai *dai,
+static int omap_pcm_new(struct snd_card *card, struct snd_soc_dai *dai,
struct snd_pcm *pcm)
{
int ret = 0;
if (!card->dev->dma_mask)
card->dev->dma_mask = &omap_pcm_dmamask;
if (!card->dev->coherent_dma_mask)
- card->dev->coherent_dma_mask = DMA_BIT_MASK(32);
+ card->dev->coherent_dma_mask = DMA_BIT_MASK(64);
if (dai->playback.channels_min) {
ret = omap_pcm_preallocate_dma_buffer(pcm,
char *name; /* stream identifier */
int dma_req; /* DMA request line */
unsigned long port_addr; /* transmit/receive register */
+ int sync_mode; /* DMA sync mode */
+ void (*set_threshold)(struct snd_pcm_substream *substream);
};
extern struct snd_soc_platform omap_soc_platform;
#include <linux/clk.h>
#include <linux/platform_device.h>
+#include <linux/i2c/twl4030.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
#include "omap-pcm.h"
#include "../codecs/twl4030.h"
+/* TWL4030 PMBR1 Register */
+#define TWL4030_INTBR_PMBR1 0x0D
+/* TWL4030 PMBR1 Register GPIO6 mux bit */
+#define TWL4030_GPIO6_PWM0_MUTE(value) (value << 2)
+
static struct snd_soc_card snd_soc_sdp3430;
static int sdp3430_hw_params(struct snd_pcm_substream *substream,
ret = snd_soc_dai_set_fmt(codec_dai,
SND_SOC_DAIFMT_DSP_A |
SND_SOC_DAIFMT_IB_NF |
- SND_SOC_DAIFMT_CBS_CFM);
+ SND_SOC_DAIFMT_CBM_CFM);
if (ret) {
printk(KERN_ERR "can't set codec DAI configuration\n");
return ret;
static struct twl4030_setup_data twl4030_setup = {
.ramp_delay_value = 3,
.sysclk = 26000,
+ .hs_extmute = 1,
};
/* Audio subsystem */
static int __init sdp3430_soc_init(void)
{
int ret;
+ u8 pin_mux;
if (!machine_is_omap_3430sdp()) {
pr_debug("Not SDP3430!\n");
*(unsigned int *)sdp3430_dai[0].cpu_dai->private_data = 1; /* McBSP2 */
*(unsigned int *)sdp3430_dai[1].cpu_dai->private_data = 2; /* McBSP3 */
+ /* Set TWL4030 GPIO6 as EXTMUTE signal */
+ twl4030_i2c_read_u8(TWL4030_MODULE_INTBR, &pin_mux,
+ TWL4030_INTBR_PMBR1);
+ pin_mux &= ~TWL4030_GPIO6_PWM0_MUTE(0x03);
+ pin_mux |= TWL4030_GPIO6_PWM0_MUTE(0x02);
+ twl4030_i2c_write_u8(TWL4030_MODULE_INTBR, pin_mux,
+ TWL4030_INTBR_PMBR1);
+
ret = platform_device_add(sdp3430_snd_device);
if (ret)
goto err1;
--- /dev/null
+/*
+ * zoom2.c -- SoC audio for Zoom2
+ *
+ * Author: Misael Lopez Cruz <x0052729@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <mach/mcbsp.h>
+
+#include "omap-mcbsp.h"
+#include "omap-pcm.h"
+#include "../codecs/twl4030.h"
+
+#define ZOOM2_HEADSET_MUX_GPIO (OMAP_MAX_GPIO_LINES + 15)
+#define ZOOM2_HEADSET_EXTMUTE_GPIO 153
+
+static int zoom2_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ int ret;
+
+ /* Set codec DAI configuration */
+ ret = snd_soc_dai_set_fmt(codec_dai,
+ SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM);
+ if (ret < 0) {
+ printk(KERN_ERR "can't set codec DAI configuration\n");
+ return ret;
+ }
+
+ /* Set cpu DAI configuration */
+ ret = snd_soc_dai_set_fmt(cpu_dai,
+ SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM);
+ if (ret < 0) {
+ printk(KERN_ERR "can't set cpu DAI configuration\n");
+ return ret;
+ }
+
+ /* Set the codec system clock for DAC and ADC */
+ ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000,
+ SND_SOC_CLOCK_IN);
+ if (ret < 0) {
+ printk(KERN_ERR "can't set codec system clock\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static struct snd_soc_ops zoom2_ops = {
+ .hw_params = zoom2_hw_params,
+};
+
+static int zoom2_hw_voice_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ int ret;
+
+ /* Set codec DAI configuration */
+ ret = snd_soc_dai_set_fmt(codec_dai,
+ SND_SOC_DAIFMT_DSP_A |
+ SND_SOC_DAIFMT_IB_NF |
+ SND_SOC_DAIFMT_CBM_CFM);
+ if (ret) {
+ printk(KERN_ERR "can't set codec DAI configuration\n");
+ return ret;
+ }
+
+ /* Set cpu DAI configuration */
+ ret = snd_soc_dai_set_fmt(cpu_dai,
+ SND_SOC_DAIFMT_DSP_A |
+ SND_SOC_DAIFMT_IB_NF |
+ SND_SOC_DAIFMT_CBM_CFM);
+ if (ret < 0) {
+ printk(KERN_ERR "can't set cpu DAI configuration\n");
+ return ret;
+ }
+
+ /* Set the codec system clock for DAC and ADC */
+ ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000,
+ SND_SOC_CLOCK_IN);
+ if (ret < 0) {
+ printk(KERN_ERR "can't set codec system clock\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static struct snd_soc_ops zoom2_voice_ops = {
+ .hw_params = zoom2_hw_voice_params,
+};
+
+/* Zoom2 machine DAPM */
+static const struct snd_soc_dapm_widget zoom2_twl4030_dapm_widgets[] = {
+ SND_SOC_DAPM_MIC("Ext Mic", NULL),
+ SND_SOC_DAPM_SPK("Ext Spk", NULL),
+ SND_SOC_DAPM_MIC("Headset Mic", NULL),
+ SND_SOC_DAPM_HP("Headset Stereophone", NULL),
+ SND_SOC_DAPM_LINE("Aux In", NULL),
+};
+
+static const struct snd_soc_dapm_route audio_map[] = {
+ /* External Mics: MAINMIC, SUBMIC with bias*/
+ {"MAINMIC", NULL, "Mic Bias 1"},
+ {"SUBMIC", NULL, "Mic Bias 2"},
+ {"Mic Bias 1", NULL, "Ext Mic"},
+ {"Mic Bias 2", NULL, "Ext Mic"},
+
+ /* External Speakers: HFL, HFR */
+ {"Ext Spk", NULL, "HFL"},
+ {"Ext Spk", NULL, "HFR"},
+
+ /* Headset Stereophone: HSOL, HSOR */
+ {"Headset Stereophone", NULL, "HSOL"},
+ {"Headset Stereophone", NULL, "HSOR"},
+
+ /* Headset Mic: HSMIC with bias */
+ {"HSMIC", NULL, "Headset Mic Bias"},
+ {"Headset Mic Bias", NULL, "Headset Mic"},
+
+ /* Aux In: AUXL, AUXR */
+ {"Aux In", NULL, "AUXL"},
+ {"Aux In", NULL, "AUXR"},
+};
+
+static int zoom2_twl4030_init(struct snd_soc_codec *codec)
+{
+ int ret;
+
+ /* Add Zoom2 specific widgets */
+ ret = snd_soc_dapm_new_controls(codec, zoom2_twl4030_dapm_widgets,
+ ARRAY_SIZE(zoom2_twl4030_dapm_widgets));
+ if (ret)
+ return ret;
+
+ /* Set up Zoom2 specific audio path audio_map */
+ snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+
+ /* Zoom2 connected pins */
+ snd_soc_dapm_enable_pin(codec, "Ext Mic");
+ snd_soc_dapm_enable_pin(codec, "Ext Spk");
+ snd_soc_dapm_enable_pin(codec, "Headset Mic");
+ snd_soc_dapm_enable_pin(codec, "Headset Stereophone");
+ snd_soc_dapm_enable_pin(codec, "Aux In");
+
+ /* TWL4030 not connected pins */
+ snd_soc_dapm_nc_pin(codec, "CARKITMIC");
+ snd_soc_dapm_nc_pin(codec, "DIGIMIC0");
+ snd_soc_dapm_nc_pin(codec, "DIGIMIC1");
+
+ snd_soc_dapm_nc_pin(codec, "OUTL");
+ snd_soc_dapm_nc_pin(codec, "OUTR");
+ snd_soc_dapm_nc_pin(codec, "EARPIECE");
+ snd_soc_dapm_nc_pin(codec, "PREDRIVEL");
+ snd_soc_dapm_nc_pin(codec, "PREDRIVER");
+ snd_soc_dapm_nc_pin(codec, "CARKITL");
+ snd_soc_dapm_nc_pin(codec, "CARKITR");
+
+ ret = snd_soc_dapm_sync(codec);
+
+ return ret;
+}
+
+static int zoom2_twl4030_voice_init(struct snd_soc_codec *codec)
+{
+ unsigned short reg;
+
+ /* Enable voice interface */
+ reg = codec->read(codec, TWL4030_REG_VOICE_IF);
+ reg |= TWL4030_VIF_DIN_EN | TWL4030_VIF_DOUT_EN | TWL4030_VIF_EN;
+ codec->write(codec, TWL4030_REG_VOICE_IF, reg);
+
+ return 0;
+}
+
+/* Digital audio interface glue - connects codec <--> CPU */
+static struct snd_soc_dai_link zoom2_dai[] = {
+ {
+ .name = "TWL4030 I2S",
+ .stream_name = "TWL4030 Audio",
+ .cpu_dai = &omap_mcbsp_dai[0],
+ .codec_dai = &twl4030_dai[TWL4030_DAI_HIFI],
+ .init = zoom2_twl4030_init,
+ .ops = &zoom2_ops,
+ },
+ {
+ .name = "TWL4030 PCM",
+ .stream_name = "TWL4030 Voice",
+ .cpu_dai = &omap_mcbsp_dai[1],
+ .codec_dai = &twl4030_dai[TWL4030_DAI_VOICE],
+ .init = zoom2_twl4030_voice_init,
+ .ops = &zoom2_voice_ops,
+ },
+};
+
+/* Audio machine driver */
+static struct snd_soc_card snd_soc_zoom2 = {
+ .name = "Zoom2",
+ .platform = &omap_soc_platform,
+ .dai_link = zoom2_dai,
+ .num_links = ARRAY_SIZE(zoom2_dai),
+};
+
+/* EXTMUTE callback function */
+void zoom2_set_hs_extmute(int mute)
+{
+ gpio_set_value(ZOOM2_HEADSET_EXTMUTE_GPIO, mute);
+}
+
+/* twl4030 setup */
+static struct twl4030_setup_data twl4030_setup = {
+ .ramp_delay_value = 3, /* 161 ms */
+ .sysclk = 26000,
+ .hs_extmute = 1,
+ .set_hs_extmute = zoom2_set_hs_extmute,
+};
+
+/* Audio subsystem */
+static struct snd_soc_device zoom2_snd_devdata = {
+ .card = &snd_soc_zoom2,
+ .codec_dev = &soc_codec_dev_twl4030,
+ .codec_data = &twl4030_setup,
+};
+
+static struct platform_device *zoom2_snd_device;
+
+static int __init zoom2_soc_init(void)
+{
+ int ret;
+
+ if (!machine_is_omap_zoom2()) {
+ pr_debug("Not Zoom2!\n");
+ return -ENODEV;
+ }
+ printk(KERN_INFO "Zoom2 SoC init\n");
+
+ zoom2_snd_device = platform_device_alloc("soc-audio", -1);
+ if (!zoom2_snd_device) {
+ printk(KERN_ERR "Platform device allocation failed\n");
+ return -ENOMEM;
+ }
+
+ platform_set_drvdata(zoom2_snd_device, &zoom2_snd_devdata);
+ zoom2_snd_devdata.dev = &zoom2_snd_device->dev;
+ *(unsigned int *)zoom2_dai[0].cpu_dai->private_data = 1; /* McBSP2 */
+ *(unsigned int *)zoom2_dai[1].cpu_dai->private_data = 2; /* McBSP3 */
+
+ ret = platform_device_add(zoom2_snd_device);
+ if (ret)
+ goto err1;
+
+ BUG_ON(gpio_request(ZOOM2_HEADSET_MUX_GPIO, "hs_mux") < 0);
+ gpio_direction_output(ZOOM2_HEADSET_MUX_GPIO, 0);
+
+ BUG_ON(gpio_request(ZOOM2_HEADSET_EXTMUTE_GPIO, "ext_mute") < 0);
+ gpio_direction_output(ZOOM2_HEADSET_EXTMUTE_GPIO, 0);
+
+ return 0;
+
+err1:
+ printk(KERN_ERR "Unable to add platform device\n");
+ platform_device_put(zoom2_snd_device);
+
+ return ret;
+}
+module_init(zoom2_soc_init);
+
+static void __exit zoom2_soc_exit(void)
+{
+ gpio_free(ZOOM2_HEADSET_MUX_GPIO);
+ gpio_free(ZOOM2_HEADSET_EXTMUTE_GPIO);
+
+ platform_device_unregister(zoom2_snd_device);
+}
+module_exit(zoom2_soc_exit);
+
+MODULE_AUTHOR("Misael Lopez Cruz <x0052729@ti.com>");
+MODULE_DESCRIPTION("ALSA SoC Zoom2");
+MODULE_LICENSE("GPL");
+
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/gpio.h>
+#include <linux/i2c.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
+#include <sound/uda1380.h>
#include <mach/magician.h>
#include <asm/mach-types.h>
if (ret < 0)
return ret;
- ret = snd_soc_dai_set_tdm_slot(cpu_dai, 1, 1);
+ ret = snd_soc_dai_set_tdm_slot(cpu_dai, 1, 0, 1, width);
if (ret < 0)
return ret;
.platform = &pxa2xx_soc_platform,
};
-/* magician audio private data */
-static struct uda1380_setup_data magician_uda1380_setup = {
- .i2c_address = 0x18,
- .dac_clk = UDA1380_DAC_CLK_WSPLL,
-};
-
/* magician audio subsystem */
static struct snd_soc_device magician_snd_devdata = {
.card = &snd_soc_card_magician,
.codec_dev = &soc_codec_dev_uda1380,
- .codec_data = &magician_uda1380_setup,
};
static struct platform_device *magician_snd_device;
+/*
+ * FIXME: move into magician board file once merged into the pxa tree
+ */
+static struct uda1380_platform_data uda1380_info = {
+ .gpio_power = EGPIO_MAGICIAN_CODEC_POWER,
+ .gpio_reset = EGPIO_MAGICIAN_CODEC_RESET,
+ .dac_clk = UDA1380_DAC_CLK_WSPLL,
+};
+
+static struct i2c_board_info i2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("uda1380", 0x18),
+ .platform_data = &uda1380_info,
+ },
+};
+
static int __init magician_init(void)
{
int ret;
+ struct i2c_adapter *adapter;
+ struct i2c_client *client;
if (!machine_is_magician())
return -ENODEV;
- ret = gpio_request(EGPIO_MAGICIAN_CODEC_POWER, "CODEC_POWER");
- if (ret)
- goto err_request_power;
- ret = gpio_request(EGPIO_MAGICIAN_CODEC_RESET, "CODEC_RESET");
- if (ret)
- goto err_request_reset;
+ adapter = i2c_get_adapter(0);
+ if (!adapter)
+ return -ENODEV;
+ client = i2c_new_device(adapter, i2c_board_info);
+ i2c_put_adapter(adapter);
+ if (!client)
+ return -ENODEV;
+
ret = gpio_request(EGPIO_MAGICIAN_SPK_POWER, "SPK_POWER");
if (ret)
goto err_request_spk;
if (ret)
goto err_request_in_sel1;
- gpio_set_value(EGPIO_MAGICIAN_CODEC_POWER, 1);
gpio_set_value(EGPIO_MAGICIAN_IN_SEL0, 0);
- /* we may need to have the clock running here - pH5 */
- gpio_set_value(EGPIO_MAGICIAN_CODEC_RESET, 1);
- udelay(5);
- gpio_set_value(EGPIO_MAGICIAN_CODEC_RESET, 0);
-
magician_snd_device = platform_device_alloc("soc-audio", -1);
if (!magician_snd_device) {
ret = -ENOMEM;
err_request_ep:
gpio_free(EGPIO_MAGICIAN_SPK_POWER);
err_request_spk:
- gpio_free(EGPIO_MAGICIAN_CODEC_RESET);
-err_request_reset:
- gpio_free(EGPIO_MAGICIAN_CODEC_POWER);
-err_request_power:
return ret;
}
gpio_set_value(EGPIO_MAGICIAN_SPK_POWER, 0);
gpio_set_value(EGPIO_MAGICIAN_EP_POWER, 0);
gpio_set_value(EGPIO_MAGICIAN_MIC_POWER, 0);
- gpio_set_value(EGPIO_MAGICIAN_CODEC_POWER, 0);
gpio_free(EGPIO_MAGICIAN_IN_SEL1);
gpio_free(EGPIO_MAGICIAN_IN_SEL0);
gpio_free(EGPIO_MAGICIAN_MIC_POWER);
gpio_free(EGPIO_MAGICIAN_EP_POWER);
gpio_free(EGPIO_MAGICIAN_SPK_POWER);
- gpio_free(EGPIO_MAGICIAN_CODEC_RESET);
- gpio_free(EGPIO_MAGICIAN_CODEC_POWER);
}
module_init(magician_init);
#include <linux/moduleparam.h>
#include <linux/device.h>
#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
+#include <sound/jack.h>
#include <asm/mach-types.h>
#include <mach/audio.h>
#include "pxa2xx-pcm.h"
#include "pxa2xx-ac97.h"
-static int palm27x_jack_func = 1;
-static int palm27x_spk_func = 1;
-static int palm27x_ep_gpio = -1;
+static struct snd_soc_jack hs_jack;
-static void palm27x_ext_control(struct snd_soc_codec *codec)
-{
- if (!palm27x_spk_func)
- snd_soc_dapm_enable_pin(codec, "Speaker");
- else
- snd_soc_dapm_disable_pin(codec, "Speaker");
-
- if (!palm27x_jack_func)
- snd_soc_dapm_enable_pin(codec, "Headphone Jack");
- else
- snd_soc_dapm_disable_pin(codec, "Headphone Jack");
-
- snd_soc_dapm_sync(codec);
-}
-
-static int palm27x_startup(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_codec *codec = rtd->socdev->card->codec;
-
- /* check the jack status at stream startup */
- palm27x_ext_control(codec);
- return 0;
-}
-
-static struct snd_soc_ops palm27x_ops = {
- .startup = palm27x_startup,
+/* Headphones jack detection DAPM pins */
+static struct snd_soc_jack_pin hs_jack_pins[] = {
+ {
+ .pin = "Headphone Jack",
+ .mask = SND_JACK_HEADPHONE,
+ },
};
-static irqreturn_t palm27x_interrupt(int irq, void *v)
-{
- palm27x_spk_func = gpio_get_value(palm27x_ep_gpio);
- palm27x_jack_func = !palm27x_spk_func;
- return IRQ_HANDLED;
-}
-
-static int palm27x_get_jack(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- ucontrol->value.integer.value[0] = palm27x_jack_func;
- return 0;
-}
-
-static int palm27x_set_jack(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
-
- if (palm27x_jack_func == ucontrol->value.integer.value[0])
- return 0;
-
- palm27x_jack_func = ucontrol->value.integer.value[0];
- palm27x_ext_control(codec);
- return 1;
-}
-
-static int palm27x_get_spk(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- ucontrol->value.integer.value[0] = palm27x_spk_func;
- return 0;
-}
-
-static int palm27x_set_spk(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
-
- if (palm27x_spk_func == ucontrol->value.integer.value[0])
- return 0;
-
- palm27x_spk_func = ucontrol->value.integer.value[0];
- palm27x_ext_control(codec);
- return 1;
-}
+/* Headphones jack detection gpios */
+static struct snd_soc_jack_gpio hs_jack_gpios[] = {
+ [0] = {
+ /* gpio is set on per-platform basis */
+ .name = "hp-gpio",
+ .report = SND_JACK_HEADPHONE,
+ .debounce_time = 200,
+ },
+};
-/* PalmTX machine dapm widgets */
+/* Palm27x machine dapm widgets */
static const struct snd_soc_dapm_widget palm27x_dapm_widgets[] = {
SND_SOC_DAPM_HP("Headphone Jack", NULL),
- SND_SOC_DAPM_SPK("Speaker", NULL),
+ SND_SOC_DAPM_SPK("Ext. Speaker", NULL),
+ SND_SOC_DAPM_MIC("Ext. Microphone", NULL),
};
/* PalmTX audio map */
{"Headphone Jack", NULL, "HPOUTR"},
/* ext speaker connected to ROUT2, LOUT2 */
- {"Speaker", NULL, "LOUT2"},
- {"Speaker", NULL, "ROUT2"},
-};
+ {"Ext. Speaker", NULL, "LOUT2"},
+ {"Ext. Speaker", NULL, "ROUT2"},
-static const char *jack_function[] = {"Headphone", "Off"};
-static const char *spk_function[] = {"On", "Off"};
-static const struct soc_enum palm27x_enum[] = {
- SOC_ENUM_SINGLE_EXT(2, jack_function),
- SOC_ENUM_SINGLE_EXT(2, spk_function),
+ /* mic connected to MIC1 */
+ {"Ext. Microphone", NULL, "MIC1"},
};
-static const struct snd_kcontrol_new palm27x_controls[] = {
- SOC_ENUM_EXT("Jack Function", palm27x_enum[0], palm27x_get_jack,
- palm27x_set_jack),
- SOC_ENUM_EXT("Speaker Function", palm27x_enum[1], palm27x_get_spk,
- palm27x_set_spk),
-};
+static struct snd_soc_card palm27x_asoc;
static int palm27x_ac97_init(struct snd_soc_codec *codec)
{
int err;
+ /* add palm27x specific widgets */
+ err = snd_soc_dapm_new_controls(codec, palm27x_dapm_widgets,
+ ARRAY_SIZE(palm27x_dapm_widgets));
+ if (err)
+ return err;
+
+ /* set up palm27x specific audio path audio_map */
+ err = snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+ if (err)
+ return err;
+
+ /* connected pins */
+ if (machine_is_palmld())
+ snd_soc_dapm_enable_pin(codec, "MIC1");
+ snd_soc_dapm_enable_pin(codec, "HPOUTL");
+ snd_soc_dapm_enable_pin(codec, "HPOUTR");
+ snd_soc_dapm_enable_pin(codec, "LOUT2");
+ snd_soc_dapm_enable_pin(codec, "ROUT2");
+
+ /* not connected pins */
snd_soc_dapm_nc_pin(codec, "OUT3");
snd_soc_dapm_nc_pin(codec, "MONOOUT");
+ snd_soc_dapm_nc_pin(codec, "LINEINL");
+ snd_soc_dapm_nc_pin(codec, "LINEINR");
+ snd_soc_dapm_nc_pin(codec, "PCBEEP");
+ snd_soc_dapm_nc_pin(codec, "PHONE");
+ snd_soc_dapm_nc_pin(codec, "MIC2");
+
+ err = snd_soc_dapm_sync(codec);
+ if (err)
+ return err;
- /* add palm27x specific controls */
- err = snd_soc_add_controls(codec, palm27x_controls,
- ARRAY_SIZE(palm27x_controls));
- if (err < 0)
+ /* Jack detection API stuff */
+ err = snd_soc_jack_new(&palm27x_asoc, "Headphone Jack",
+ SND_JACK_HEADPHONE, &hs_jack);
+ if (err)
return err;
- /* add palm27x specific widgets */
- snd_soc_dapm_new_controls(codec, palm27x_dapm_widgets,
- ARRAY_SIZE(palm27x_dapm_widgets));
+ err = snd_soc_jack_add_pins(&hs_jack, ARRAY_SIZE(hs_jack_pins),
+ hs_jack_pins);
+ if (err)
+ return err;
- /* set up palm27x specific audio path audio_map */
- snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+ err = snd_soc_jack_add_gpios(&hs_jack, ARRAY_SIZE(hs_jack_gpios),
+ hs_jack_gpios);
- snd_soc_dapm_sync(codec);
- return 0;
+ return err;
}
static struct snd_soc_dai_link palm27x_dai[] = {
.cpu_dai = &pxa_ac97_dai[PXA2XX_DAI_AC97_HIFI],
.codec_dai = &wm9712_dai[WM9712_DAI_AC97_HIFI],
.init = palm27x_ac97_init,
- .ops = &palm27x_ops,
},
{
.name = "AC97 Aux",
.stream_name = "AC97 Aux",
.cpu_dai = &pxa_ac97_dai[PXA2XX_DAI_AC97_AUX],
.codec_dai = &wm9712_dai[WM9712_DAI_AC97_AUX],
- .ops = &palm27x_ops,
},
};
machine_is_palmld() || machine_is_palmte2()))
return -ENODEV;
- if (pdev->dev.platform_data)
- palm27x_ep_gpio = ((struct palm27x_asoc_info *)
- (pdev->dev.platform_data))->jack_gpio;
-
- ret = gpio_request(palm27x_ep_gpio, "Headphone Jack");
- if (ret)
- return ret;
- ret = gpio_direction_input(palm27x_ep_gpio);
- if (ret)
- goto err_alloc;
+ if (!pdev->dev.platform_data) {
+ dev_err(&pdev->dev, "please supply platform_data\n");
+ return -ENODEV;
+ }
- if (request_irq(gpio_to_irq(palm27x_ep_gpio), palm27x_interrupt,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- "Headphone jack", NULL))
- goto err_alloc;
+ hs_jack_gpios[0].gpio = ((struct palm27x_asoc_info *)
+ (pdev->dev.platform_data))->jack_gpio;
palm27x_snd_device = platform_device_alloc("soc-audio", -1);
- if (!palm27x_snd_device) {
- ret = -ENOMEM;
- goto err_dev;
- }
+ if (!palm27x_snd_device)
+ return -ENOMEM;
platform_set_drvdata(palm27x_snd_device, &palm27x_snd_devdata);
palm27x_snd_devdata.dev = &palm27x_snd_device->dev;
put_device:
platform_device_put(palm27x_snd_device);
-err_dev:
- free_irq(gpio_to_irq(palm27x_ep_gpio), NULL);
-err_alloc:
- gpio_free(palm27x_ep_gpio);
return ret;
}
static int __devexit palm27x_asoc_remove(struct platform_device *pdev)
{
- free_irq(gpio_to_irq(palm27x_ep_gpio), NULL);
- gpio_free(palm27x_ep_gpio);
platform_device_unregister(palm27x_snd_device);
return 0;
}
* Set the active slots in TDM/Network mode
*/
static int pxa_ssp_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai,
- unsigned int mask, int slots)
+ unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width)
{
struct ssp_priv *priv = cpu_dai->private_data;
struct ssp_device *ssp = priv->dev.ssp;
u32 sscr0;
- sscr0 = ssp_read_reg(ssp, SSCR0) & ~SSCR0_SlotsPerFrm(7);
+ sscr0 = ssp_read_reg(ssp, SSCR0);
+ sscr0 &= ~(SSCR0_MOD | SSCR0_SlotsPerFrm(8) | SSCR0_EDSS | SSCR0_DSS);
+
+ /* set slot width */
+ if (slot_width > 16)
+ sscr0 |= SSCR0_EDSS | SSCR0_DataSize(slot_width - 16);
+ else
+ sscr0 |= SSCR0_DataSize(slot_width);
+
+ if (slots > 1) {
+ /* enable network mode */
+ sscr0 |= SSCR0_MOD;
- /* set number of active slots */
- sscr0 |= SSCR0_SlotsPerFrm(slots);
+ /* set number of active slots */
+ sscr0 |= SSCR0_SlotsPerFrm(slots);
+
+ /* set active slot mask */
+ ssp_write_reg(ssp, SSTSA, tx_mask);
+ ssp_write_reg(ssp, SSRSA, rx_mask);
+ }
ssp_write_reg(ssp, SSCR0, sscr0);
- /* set active slot mask */
- ssp_write_reg(ssp, SSTSA, mask);
- ssp_write_reg(ssp, SSRSA, mask);
return 0;
}
return -EINVAL;
}
- ssp_write_reg(ssp, SSCR0, sscr0);
- ssp_write_reg(ssp, SSCR1, sscr1);
- ssp_write_reg(ssp, SSPSP, sspsp);
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ sspsp |= SSPSP_SFRMP;
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ break;
+ case SND_SOC_DAIFMT_IB_IF:
+ sspsp |= SSPSP_SCMODE(2);
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ sspsp |= SSPSP_SCMODE(2) | SSPSP_SFRMP;
+ break;
+ default:
+ return -EINVAL;
+ }
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
sscr0 |= SSCR0_PSP;
sscr1 |= SSCR1_RWOT | SSCR1_TRAIL;
-
/* See hw_params() */
- switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
- case SND_SOC_DAIFMT_NB_NF:
- sspsp |= SSPSP_SFRMP;
- break;
- case SND_SOC_DAIFMT_NB_IF:
- break;
- case SND_SOC_DAIFMT_IB_IF:
- sspsp |= SSPSP_SCMODE(2);
- break;
- case SND_SOC_DAIFMT_IB_NF:
- sspsp |= SSPSP_SCMODE(2) | SSPSP_SFRMP;
- break;
- default:
- return -EINVAL;
- }
break;
case SND_SOC_DAIFMT_DSP_A:
case SND_SOC_DAIFMT_DSP_B:
sscr0 |= SSCR0_MOD | SSCR0_PSP;
sscr1 |= SSCR1_TRAIL | SSCR1_RWOT;
-
- switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
- case SND_SOC_DAIFMT_NB_NF:
- sspsp |= SSPSP_SFRMP;
- break;
- case SND_SOC_DAIFMT_NB_IF:
- break;
- case SND_SOC_DAIFMT_IB_IF:
- sspsp |= SSPSP_SCMODE(2);
- break;
- case SND_SOC_DAIFMT_IB_NF:
- sspsp |= SSPSP_SCMODE(2) | SSPSP_SFRMP;
- break;
- default:
- return -EINVAL;
- }
break;
default:
#include <mach/hardware.h>
#include <mach/regs-ac97.h>
#include <mach/dma.h>
+#include <mach/audio.h>
#include "pxa2xx-pcm.h"
#include "pxa2xx-ac97.h"
static int __devinit pxa2xx_ac97_dev_probe(struct platform_device *pdev)
{
int i;
+ pxa2xx_audio_ops_t *pdata = pdev->dev.platform_data;
- for (i = 0; i < ARRAY_SIZE(pxa_ac97_dai); i++)
+ if (pdev->id >= 0) {
+ dev_err(&pdev->dev, "PXA2xx has only one AC97 port.\n");
+ return -ENXIO;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(pxa_ac97_dai); i++) {
pxa_ac97_dai[i].dev = &pdev->dev;
+ if (pdata && pdata->codec_pdata[0])
+ pxa_ac97_dai[i].ac97_pdata = pdata->codec_pdata[0];
+ }
/* Punt most of the init to the SoC probe; we may need the machine
* driver to do interesting things with the clocking to get us up
config SND_S3C24XX_SOC
tristate "SoC Audio for the Samsung S3CXXXX chips"
- depends on ARCH_S3C2410
+ depends on ARCH_S3C2410 || ARCH_S3C64XX
+ select S3C64XX_DMA if ARCH_S3C64XX
help
Say Y or M if you want to add support for codecs attached to
the S3C24XX AC97 or I2S interfaces. You will also need to
Say Y if you want to add support for SoC audio on smdk2440
with the WM8753.
+config SND_S3C24XX_SOC_NEO1973_GTA02_WM8753
+ tristate "Audio support for the Openmoko Neo FreeRunner (GTA02)"
+ depends on SND_S3C24XX_SOC && MACH_NEO1973_GTA02
+ select SND_S3C24XX_SOC_I2S
+ select SND_SOC_WM8753
+ help
+ This driver provides audio support for the Openmoko Neo FreeRunner
+ smartphone.
+
config SND_S3C24XX_SOC_JIVE_WM8750
tristate "SoC I2S Audio support for Jive"
depends on SND_S3C24XX_SOC && MACH_JIVE
config SND_S3C24XX_SOC_LN2440SBC_ALC650
tristate "SoC AC97 Audio support for LN2440SBC - ALC650"
- depends on SND_S3C24XX_SOC
+ depends on SND_S3C24XX_SOC && ARCH_S3C2410
select SND_S3C2443_SOC_AC97
select SND_SOC_AC97_CODEC
help
config SND_S3C24XX_SOC_S3C24XX_UDA134X
tristate "SoC I2S Audio support UDA134X wired to a S3C24XX"
- depends on SND_S3C24XX_SOC
+ depends on SND_S3C24XX_SOC && ARCH_S3C2410
select SND_S3C24XX_SOC_I2S
select SND_SOC_L3
select SND_SOC_UDA134X
+
+config SND_S3C24XX_SOC_SIMTEC
+ tristate
+ help
+ Internal node for common S3C24XX/Simtec suppor
+
+config SND_S3C24XX_SOC_SIMTEC_TLV320AIC23
+ tristate "SoC I2S Audio support for TLV320AIC23 on Simtec boards"
+ depends on SND_S3C24XX_SOC && ARCH_S3C2410
+ select SND_S3C24XX_SOC_I2S
+ select SND_SOC_TLV320AIC23
+ select SND_S3C24XX_SOC_SIMTEC
+
+config SND_S3C24XX_SOC_SIMTEC_HERMES
+ tristate "SoC I2S Audio support for Simtec Hermes board"
+ depends on SND_S3C24XX_SOC && ARCH_S3C2410
+ select SND_S3C24XX_SOC_I2S
+ select SND_SOC_TLV320AIC3X
+ select SND_S3C24XX_SOC_SIMTEC
# S3C24XX Machine Support
snd-soc-jive-wm8750-objs := jive_wm8750.o
snd-soc-neo1973-wm8753-objs := neo1973_wm8753.o
+snd-soc-neo1973-gta02-wm8753-objs := neo1973_gta02_wm8753.o
snd-soc-smdk2443-wm9710-objs := smdk2443_wm9710.o
snd-soc-ln2440sbc-alc650-objs := ln2440sbc_alc650.o
snd-soc-s3c24xx-uda134x-objs := s3c24xx_uda134x.o
+snd-soc-s3c24xx-simtec-objs := s3c24xx_simtec.o
+snd-soc-s3c24xx-simtec-hermes-objs := s3c24xx_simtec_hermes.o
+snd-soc-s3c24xx-simtec-tlv320aic23-objs := s3c24xx_simtec_tlv320aic23.o
obj-$(CONFIG_SND_S3C24XX_SOC_JIVE_WM8750) += snd-soc-jive-wm8750.o
obj-$(CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753) += snd-soc-neo1973-wm8753.o
+obj-$(CONFIG_SND_S3C24XX_SOC_NEO1973_GTA02_WM8753) += snd-soc-neo1973-gta02-wm8753.o
obj-$(CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710) += snd-soc-smdk2443-wm9710.o
obj-$(CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650) += snd-soc-ln2440sbc-alc650.o
obj-$(CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X) += snd-soc-s3c24xx-uda134x.o
+obj-$(CONFIG_SND_S3C24XX_SOC_SIMTEC) += snd-soc-s3c24xx-simtec.o
+obj-$(CONFIG_SND_S3C24XX_SOC_SIMTEC_HERMES) += snd-soc-s3c24xx-simtec-hermes.o
+obj-$(CONFIG_SND_S3C24XX_SOC_SIMTEC_TLV320AIC23) += snd-soc-s3c24xx-simtec-tlv320aic23.o
+
--- /dev/null
+/*
+ * neo1973_gta02_wm8753.c -- SoC audio for Openmoko Freerunner(GTA02)
+ *
+ * Copyright 2007 Openmoko Inc
+ * Author: Graeme Gregory <graeme@openmoko.org>
+ * Copyright 2007 Wolfson Microelectronics PLC.
+ * Author: Graeme Gregory <linux@wolfsonmicro.com>
+ * Copyright 2009 Wolfson Microelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <asm/mach-types.h>
+
+#include <plat/regs-iis.h>
+
+#include <mach/regs-clock.h>
+#include <asm/io.h>
+#include <mach/gta02.h>
+#include "../codecs/wm8753.h"
+#include "s3c24xx-pcm.h"
+#include "s3c24xx-i2s.h"
+
+static struct snd_soc_card neo1973_gta02;
+
+static int neo1973_gta02_hifi_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ unsigned int pll_out = 0, bclk = 0;
+ int ret = 0;
+ unsigned long iis_clkrate;
+
+ iis_clkrate = s3c24xx_i2s_get_clockrate();
+
+ switch (params_rate(params)) {
+ case 8000:
+ case 16000:
+ pll_out = 12288000;
+ break;
+ case 48000:
+ bclk = WM8753_BCLK_DIV_4;
+ pll_out = 12288000;
+ break;
+ case 96000:
+ bclk = WM8753_BCLK_DIV_2;
+ pll_out = 12288000;
+ break;
+ case 11025:
+ bclk = WM8753_BCLK_DIV_16;
+ pll_out = 11289600;
+ break;
+ case 22050:
+ bclk = WM8753_BCLK_DIV_8;
+ pll_out = 11289600;
+ break;
+ case 44100:
+ bclk = WM8753_BCLK_DIV_4;
+ pll_out = 11289600;
+ break;
+ case 88200:
+ bclk = WM8753_BCLK_DIV_2;
+ pll_out = 11289600;
+ break;
+ }
+
+ /* set codec DAI configuration */
+ ret = snd_soc_dai_set_fmt(codec_dai,
+ SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM);
+ if (ret < 0)
+ return ret;
+
+ /* set cpu DAI configuration */
+ ret = snd_soc_dai_set_fmt(cpu_dai,
+ SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM);
+ if (ret < 0)
+ return ret;
+
+ /* set the codec system clock for DAC and ADC */
+ ret = snd_soc_dai_set_sysclk(codec_dai, WM8753_MCLK, pll_out,
+ SND_SOC_CLOCK_IN);
+ if (ret < 0)
+ return ret;
+
+ /* set MCLK division for sample rate */
+ ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK,
+ S3C2410_IISMOD_32FS);
+ if (ret < 0)
+ return ret;
+
+ /* set codec BCLK division for sample rate */
+ ret = snd_soc_dai_set_clkdiv(codec_dai,
+ WM8753_BCLKDIV, bclk);
+ if (ret < 0)
+ return ret;
+
+ /* set prescaler division for sample rate */
+ ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
+ S3C24XX_PRESCALE(4, 4));
+ if (ret < 0)
+ return ret;
+
+ /* codec PLL input is PCLK/4 */
+ ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL1,
+ iis_clkrate / 4, pll_out);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int neo1973_gta02_hifi_hw_free(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+
+ /* disable the PLL */
+ return snd_soc_dai_set_pll(codec_dai, WM8753_PLL1, 0, 0);
+}
+
+/*
+ * Neo1973 WM8753 HiFi DAI opserations.
+ */
+static struct snd_soc_ops neo1973_gta02_hifi_ops = {
+ .hw_params = neo1973_gta02_hifi_hw_params,
+ .hw_free = neo1973_gta02_hifi_hw_free,
+};
+
+static int neo1973_gta02_voice_hw_params(
+ struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ unsigned int pcmdiv = 0;
+ int ret = 0;
+ unsigned long iis_clkrate;
+
+ iis_clkrate = s3c24xx_i2s_get_clockrate();
+
+ if (params_rate(params) != 8000)
+ return -EINVAL;
+ if (params_channels(params) != 1)
+ return -EINVAL;
+
+ pcmdiv = WM8753_PCM_DIV_6; /* 2.048 MHz */
+
+ /* todo: gg check mode (DSP_B) against CSR datasheet */
+ /* set codec DAI configuration */
+ ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B |
+ SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
+ if (ret < 0)
+ return ret;
+
+ /* set the codec system clock for DAC and ADC */
+ ret = snd_soc_dai_set_sysclk(codec_dai, WM8753_PCMCLK,
+ 12288000, SND_SOC_CLOCK_IN);
+ if (ret < 0)
+ return ret;
+
+ /* set codec PCM division for sample rate */
+ ret = snd_soc_dai_set_clkdiv(codec_dai, WM8753_PCMDIV,
+ pcmdiv);
+ if (ret < 0)
+ return ret;
+
+ /* configue and enable PLL for 12.288MHz output */
+ ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL2,
+ iis_clkrate / 4, 12288000);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int neo1973_gta02_voice_hw_free(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+
+ /* disable the PLL */
+ return snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0, 0);
+}
+
+static struct snd_soc_ops neo1973_gta02_voice_ops = {
+ .hw_params = neo1973_gta02_voice_hw_params,
+ .hw_free = neo1973_gta02_voice_hw_free,
+};
+
+#define LM4853_AMP 1
+#define LM4853_SPK 2
+
+static u8 lm4853_state;
+
+/* This has no effect, it exists only to maintain compatibility with
+ * existing ALSA state files.
+ */
+static int lm4853_set_state(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ int val = ucontrol->value.integer.value[0];
+
+ if (val)
+ lm4853_state |= LM4853_AMP;
+ else
+ lm4853_state &= ~LM4853_AMP;
+
+ return 0;
+}
+
+static int lm4853_get_state(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ ucontrol->value.integer.value[0] = lm4853_state & LM4853_AMP;
+
+ return 0;
+}
+
+static int lm4853_set_spk(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ int val = ucontrol->value.integer.value[0];
+
+ if (val) {
+ lm4853_state |= LM4853_SPK;
+ gpio_set_value(GTA02_GPIO_HP_IN, 0);
+ } else {
+ lm4853_state &= ~LM4853_SPK;
+ gpio_set_value(GTA02_GPIO_HP_IN, 1);
+ }
+
+ return 0;
+}
+
+static int lm4853_get_spk(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ ucontrol->value.integer.value[0] = (lm4853_state & LM4853_SPK) >> 1;
+
+ return 0;
+}
+
+static int lm4853_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *k,
+ int event)
+{
+ gpio_set_value(GTA02_GPIO_AMP_SHUT, SND_SOC_DAPM_EVENT_OFF(value));
+
+ return 0;
+}
+
+static const struct snd_soc_dapm_widget wm8753_dapm_widgets[] = {
+ SND_SOC_DAPM_SPK("Stereo Out", lm4853_event),
+ SND_SOC_DAPM_LINE("GSM Line Out", NULL),
+ SND_SOC_DAPM_LINE("GSM Line In", NULL),
+ SND_SOC_DAPM_MIC("Headset Mic", NULL),
+ SND_SOC_DAPM_MIC("Handset Mic", NULL),
+ SND_SOC_DAPM_SPK("Handset Spk", NULL),
+};
+
+
+/* example machine audio_mapnections */
+static const struct snd_soc_dapm_route audio_map[] = {
+
+ /* Connections to the lm4853 amp */
+ {"Stereo Out", NULL, "LOUT1"},
+ {"Stereo Out", NULL, "ROUT1"},
+
+ /* Connections to the GSM Module */
+ {"GSM Line Out", NULL, "MONO1"},
+ {"GSM Line Out", NULL, "MONO2"},
+ {"RXP", NULL, "GSM Line In"},
+ {"RXN", NULL, "GSM Line In"},
+
+ /* Connections to Headset */
+ {"MIC1", NULL, "Mic Bias"},
+ {"Mic Bias", NULL, "Headset Mic"},
+
+ /* Call Mic */
+ {"MIC2", NULL, "Mic Bias"},
+ {"MIC2N", NULL, "Mic Bias"},
+ {"Mic Bias", NULL, "Handset Mic"},
+
+ /* Call Speaker */
+ {"Handset Spk", NULL, "LOUT2"},
+ {"Handset Spk", NULL, "ROUT2"},
+
+ /* Connect the ALC pins */
+ {"ACIN", NULL, "ACOP"},
+};
+
+static const struct snd_kcontrol_new wm8753_neo1973_gta02_controls[] = {
+ SOC_DAPM_PIN_SWITCH("Stereo Out"),
+ SOC_DAPM_PIN_SWITCH("GSM Line Out"),
+ SOC_DAPM_PIN_SWITCH("GSM Line In"),
+ SOC_DAPM_PIN_SWITCH("Headset Mic"),
+ SOC_DAPM_PIN_SWITCH("Handset Mic"),
+ SOC_DAPM_PIN_SWITCH("Handset Spk"),
+
+ /* This has no effect, it exists only to maintain compatibility with
+ * existing ALSA state files.
+ */
+ SOC_SINGLE_EXT("Amp State Switch", 6, 0, 1, 0,
+ lm4853_get_state,
+ lm4853_set_state),
+ SOC_SINGLE_EXT("Amp Spk Switch", 7, 0, 1, 0,
+ lm4853_get_spk,
+ lm4853_set_spk),
+};
+
+/*
+ * This is an example machine initialisation for a wm8753 connected to a
+ * neo1973 GTA02.
+ */
+static int neo1973_gta02_wm8753_init(struct snd_soc_codec *codec)
+{
+ int err;
+
+ /* set up NC codec pins */
+ snd_soc_dapm_nc_pin(codec, "OUT3");
+ snd_soc_dapm_nc_pin(codec, "OUT4");
+ snd_soc_dapm_nc_pin(codec, "LINE1");
+ snd_soc_dapm_nc_pin(codec, "LINE2");
+
+ /* Add neo1973 gta02 specific widgets */
+ snd_soc_dapm_new_controls(codec, wm8753_dapm_widgets,
+ ARRAY_SIZE(wm8753_dapm_widgets));
+
+ /* add neo1973 gta02 specific controls */
+ err = snd_soc_add_controls(codec, wm8753_neo1973_gta02_controls,
+ ARRAY_SIZE(wm8753_neo1973_gta02_controls));
+
+ if (err < 0)
+ return err;
+
+ /* set up neo1973 gta02 specific audio path audio_map */
+ snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+
+ /* set endpoints to default off mode */
+ snd_soc_dapm_disable_pin(codec, "Stereo Out");
+ snd_soc_dapm_disable_pin(codec, "GSM Line Out");
+ snd_soc_dapm_disable_pin(codec, "GSM Line In");
+ snd_soc_dapm_disable_pin(codec, "Headset Mic");
+ snd_soc_dapm_disable_pin(codec, "Handset Mic");
+ snd_soc_dapm_disable_pin(codec, "Handset Spk");
+
+ snd_soc_dapm_sync(codec);
+
+ return 0;
+}
+
+/*
+ * BT Codec DAI
+ */
+static struct snd_soc_dai bt_dai = {
+ .name = "Bluetooth",
+ .id = 0,
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 1,
+ .rates = SNDRV_PCM_RATE_8000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,},
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 1,
+ .rates = SNDRV_PCM_RATE_8000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,},
+};
+
+static struct snd_soc_dai_link neo1973_gta02_dai[] = {
+{ /* Hifi Playback - for similatious use with voice below */
+ .name = "WM8753",
+ .stream_name = "WM8753 HiFi",
+ .cpu_dai = &s3c24xx_i2s_dai,
+ .codec_dai = &wm8753_dai[WM8753_DAI_HIFI],
+ .init = neo1973_gta02_wm8753_init,
+ .ops = &neo1973_gta02_hifi_ops,
+},
+{ /* Voice via BT */
+ .name = "Bluetooth",
+ .stream_name = "Voice",
+ .cpu_dai = &bt_dai,
+ .codec_dai = &wm8753_dai[WM8753_DAI_VOICE],
+ .ops = &neo1973_gta02_voice_ops,
+},
+};
+
+static struct snd_soc_card neo1973_gta02 = {
+ .name = "neo1973-gta02",
+ .platform = &s3c24xx_soc_platform,
+ .dai_link = neo1973_gta02_dai,
+ .num_links = ARRAY_SIZE(neo1973_gta02_dai),
+};
+
+static struct snd_soc_device neo1973_gta02_snd_devdata = {
+ .card = &neo1973_gta02,
+ .codec_dev = &soc_codec_dev_wm8753,
+};
+
+static struct platform_device *neo1973_gta02_snd_device;
+
+static int __init neo1973_gta02_init(void)
+{
+ int ret;
+
+ if (!machine_is_neo1973_gta02()) {
+ printk(KERN_INFO
+ "Only GTA02 is supported by this ASoC driver\n");
+ return -ENODEV;
+ }
+
+ /* register bluetooth DAI here */
+ ret = snd_soc_register_dai(&bt_dai);
+ if (ret)
+ return ret;
+
+ neo1973_gta02_snd_device = platform_device_alloc("soc-audio", -1);
+ if (!neo1973_gta02_snd_device)
+ return -ENOMEM;
+
+ platform_set_drvdata(neo1973_gta02_snd_device,
+ &neo1973_gta02_snd_devdata);
+ neo1973_gta02_snd_devdata.dev = &neo1973_gta02_snd_device->dev;
+ ret = platform_device_add(neo1973_gta02_snd_device);
+
+ if (ret) {
+ platform_device_put(neo1973_gta02_snd_device);
+ return ret;
+ }
+
+ /* Initialise GPIOs used by amp */
+ ret = gpio_request(GTA02_GPIO_HP_IN, "GTA02_HP_IN");
+ if (ret) {
+ pr_err("gta02_wm8753: Failed to register GPIO %d\n", GTA02_GPIO_HP_IN);
+ goto err_unregister_device;
+ }
+
+ ret = gpio_direction_output(GTA02_GPIO_AMP_HP_IN, 1);
+ if (ret) {
+ pr_err("gta02_wm8753: Failed to configure GPIO %d\n", GTA02_GPIO_HP_IN);
+ goto err_free_gpio_hp_in;
+ }
+
+ ret = gpio_request(GTA02_GPIO_AMP_SHUT, "GTA02_AMP_SHUT");
+ if (ret) {
+ pr_err("gta02_wm8753: Failed to register GPIO %d\n", GTA02_GPIO_AMP_SHUT);
+ goto err_free_gpio_hp_in;
+ }
+
+ ret = gpio_direction_output(GTA02_GPIO_AMP_SHUT, 1);
+ if (ret) {
+ pr_err("gta02_wm8753: Failed to configure GPIO %d\n", GTA02_GPIO_AMP_SHUT);
+ goto err_free_gpio_amp_shut;
+ }
+
+ return 0;
+
+err_free_gpio_amp_shut:
+ gpio_free(GTA02_GPIO_AMP_SHUT);
+err_free_gpio_hp_in:
+ gpio_free(GTA02_GPIO_HP_IN);
+err_unregister_device:
+ platform_device_unregister(neo1973_gta02_snd_device);
+ return ret;
+}
+module_init(neo1973_gta02_init);
+
+static void __exit neo1973_gta02_exit(void)
+{
+ snd_soc_unregister_dai(&bt_dai);
+ platform_device_unregister(neo1973_gta02_snd_device);
+ gpio_free(GTA02_GPIO_HP_IN);
+ gpio_free(GTA02_GPIO_AMP_SHUT);
+}
+module_exit(neo1973_gta02_exit);
+
+/* Module information */
+MODULE_AUTHOR("Graeme Gregory, graeme@openmoko.org");
+MODULE_DESCRIPTION("ALSA SoC WM8753 Neo1973 GTA02");
+MODULE_LICENSE("GPL");
#include <mach/dma.h>
#include "s3c-i2s-v2.h"
+#include "s3c24xx-pcm.h"
#undef S3C_IIS_V2_SUPPORTED
#endif
#ifdef CONFIG_PLAT_S3C64XX
- iismod &= ~0x606;
+ iismod &= ~(S3C64XX_IISMOD_BLC_MASK | S3C2412_IISMOD_BCLK_MASK);
/* Sample size */
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S8:
/* 8 bit sample, 16fs BCLK */
- iismod |= 0x2004;
+ iismod |= (S3C64XX_IISMOD_BLC_8BIT | S3C2412_IISMOD_BCLK_16FS);
break;
case SNDRV_PCM_FORMAT_S16_LE:
/* 16 bit sample, 32fs BCLK */
break;
case SNDRV_PCM_FORMAT_S24_LE:
/* 24 bit sample, 48fs BCLK */
- iismod |= 0x4002;
+ iismod |= (S3C64XX_IISMOD_BLC_24BIT | S3C2412_IISMOD_BCLK_48FS);
break;
}
#endif
int capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE);
unsigned long irqs;
int ret = 0;
+ int channel = ((struct s3c24xx_pcm_dma_params *)
+ rtd->dai->cpu_dai->dma_data)->channel;
pr_debug("Entered %s\n", __func__);
s3c2412_snd_txctrl(i2s, 1);
local_irq_restore(irqs);
+
+ /*
+ * Load the next buffer to DMA to meet the reqirement
+ * of the auto reload mechanism of S3C24XX.
+ * This call won't bother S3C64XX.
+ */
+ s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STARTED);
+
break;
case SNDRV_PCM_TRIGGER_STOP:
static DECLARE_COMPLETION(ac97_completion);
static u32 codec_ready;
-static DECLARE_MUTEX(ac97_mutex);
+static DEFINE_MUTEX(ac97_mutex);
static unsigned short s3c2443_ac97_read(struct snd_ac97 *ac97,
unsigned short reg)
u32 ac_codec_cmd;
u32 stat, addr, data;
- down(&ac97_mutex);
+ mutex_lock(&ac97_mutex);
codec_ready = S3C_AC97_GLBSTAT_CODECREADY;
ac_codec_cmd = readl(s3c24xx_ac97.regs + S3C_AC97_CODEC_CMD);
printk(KERN_ERR "s3c24xx-ac97: req addr = %02x,"
" rep addr = %02x\n", reg, addr);
- up(&ac97_mutex);
+ mutex_unlock(&ac97_mutex);
return (unsigned short)data;
}
u32 ac_glbctrl;
u32 ac_codec_cmd;
- down(&ac97_mutex);
+ mutex_lock(&ac97_mutex);
codec_ready = S3C_AC97_GLBSTAT_CODECREADY;
ac_codec_cmd = readl(s3c24xx_ac97.regs + S3C_AC97_CODEC_CMD);
ac_codec_cmd |= S3C_AC97_CODEC_CMD_READ;
writel(ac_codec_cmd, s3c24xx_ac97.regs + S3C_AC97_CODEC_CMD);
- up(&ac97_mutex);
+ mutex_unlock(&ac97_mutex);
}
struct snd_soc_dai *dai)
{
u32 ac_glbctrl;
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ int channel = ((struct s3c24xx_pcm_dma_params *)
+ rtd->dai->cpu_dai->dma_data)->channel;
ac_glbctrl = readl(s3c24xx_ac97.regs + S3C_AC97_GLBCTRL);
switch (cmd) {
}
writel(ac_glbctrl, s3c24xx_ac97.regs + S3C_AC97_GLBCTRL);
+ s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STARTED);
+
return 0;
}
int cmd, struct snd_soc_dai *dai)
{
u32 ac_glbctrl;
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ int channel = ((struct s3c24xx_pcm_dma_params *)
+ rtd->dai->cpu_dai->dma_data)->channel;
ac_glbctrl = readl(s3c24xx_ac97.regs + S3C_AC97_GLBCTRL);
switch (cmd) {
}
writel(ac_glbctrl, s3c24xx_ac97.regs + S3C_AC97_GLBCTRL);
+ s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STARTED);
+
return 0;
}
struct snd_soc_dai *dai)
{
int ret = 0;
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ int channel = ((struct s3c24xx_pcm_dma_params *)
+ rtd->dai->cpu_dai->dma_data)->channel;
pr_debug("Entered %s\n", __func__);
s3c24xx_snd_rxctrl(1);
else
s3c24xx_snd_txctrl(1);
+
+ s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STARTED);
break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
prtd->state |= ST_RUNNING;
s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_START);
- s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_STARTED);
break;
case SNDRV_PCM_TRIGGER_STOP:
pr_debug("Entered %s\n", __func__);
+ snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
snd_soc_set_runtime_hwparams(substream, &s3c24xx_pcm_hardware);
prtd = kzalloc(sizeof(struct s3c24xx_runtime_data), GFP_KERNEL);
--- /dev/null
+/* sound/soc/s3c24xx/s3c24xx_simtec.c
+ *
+ * Copyright 2009 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/i2c.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <plat/audio-simtec.h>
+
+#include "s3c24xx-pcm.h"
+#include "s3c24xx-i2s.h"
+#include "s3c24xx_simtec.h"
+
+static struct s3c24xx_audio_simtec_pdata *pdata;
+static struct clk *xtal_clk;
+
+static int spk_gain;
+static int spk_unmute;
+
+/**
+ * speaker_gain_get - read the speaker gain setting.
+ * @kcontrol: The control for the speaker gain.
+ * @ucontrol: The value that needs to be updated.
+ *
+ * Read the value for the AMP gain control.
+ */
+static int speaker_gain_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ ucontrol->value.integer.value[0] = spk_gain;
+ return 0;
+}
+
+/**
+ * speaker_gain_set - set the value of the speaker amp gain
+ * @value: The value to write.
+ */
+static void speaker_gain_set(int value)
+{
+ gpio_set_value_cansleep(pdata->amp_gain[0], value & 1);
+ gpio_set_value_cansleep(pdata->amp_gain[1], value >> 1);
+}
+
+/**
+ * speaker_gain_put - set the speaker gain setting.
+ * @kcontrol: The control for the speaker gain.
+ * @ucontrol: The value that needs to be set.
+ *
+ * Set the value of the speaker gain from the specified
+ * @ucontrol setting.
+ *
+ * Note, if the speaker amp is muted, then we do not set a gain value
+ * as at-least one of the ICs that is fitted will try and power up even
+ * if the main control is set to off.
+ */
+static int speaker_gain_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ int value = ucontrol->value.integer.value[0];
+
+ spk_gain = value;
+
+ if (!spk_unmute)
+ speaker_gain_set(value);
+
+ return 0;
+}
+
+static const struct snd_kcontrol_new amp_gain_controls[] = {
+ SOC_SINGLE_EXT("Speaker Gain", 0, 0, 3, 0,
+ speaker_gain_get, speaker_gain_put),
+};
+
+/**
+ * spk_unmute_state - set the unmute state of the speaker
+ * @to: zero to unmute, non-zero to ununmute.
+ */
+static void spk_unmute_state(int to)
+{
+ pr_debug("%s: to=%d\n", __func__, to);
+
+ spk_unmute = to;
+ gpio_set_value(pdata->amp_gpio, to);
+
+ /* if we're umuting, also re-set the gain */
+ if (to && pdata->amp_gain[0] > 0)
+ speaker_gain_set(spk_gain);
+}
+
+/**
+ * speaker_unmute_get - read the speaker unmute setting.
+ * @kcontrol: The control for the speaker gain.
+ * @ucontrol: The value that needs to be updated.
+ *
+ * Read the value for the AMP gain control.
+ */
+static int speaker_unmute_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ ucontrol->value.integer.value[0] = spk_unmute;
+ return 0;
+}
+
+/**
+ * speaker_unmute_put - set the speaker unmute setting.
+ * @kcontrol: The control for the speaker gain.
+ * @ucontrol: The value that needs to be set.
+ *
+ * Set the value of the speaker gain from the specified
+ * @ucontrol setting.
+ */
+static int speaker_unmute_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ spk_unmute_state(ucontrol->value.integer.value[0]);
+ return 0;
+}
+
+/* This is added as a manual control as the speaker amps create clicks
+ * when their power state is changed, which are far more noticeable than
+ * anything produced by the CODEC itself.
+ */
+static const struct snd_kcontrol_new amp_unmute_controls[] = {
+ SOC_SINGLE_EXT("Speaker Switch", 0, 0, 1, 0,
+ speaker_unmute_get, speaker_unmute_put),
+};
+
+void simtec_audio_init(struct snd_soc_codec *codec)
+{
+ if (pdata->amp_gpio > 0) {
+ pr_debug("%s: adding amp routes\n", __func__);
+
+ snd_soc_add_controls(codec, amp_unmute_controls,
+ ARRAY_SIZE(amp_unmute_controls));
+ }
+
+ if (pdata->amp_gain[0] > 0) {
+ pr_debug("%s: adding amp controls\n", __func__);
+ snd_soc_add_controls(codec, amp_gain_controls,
+ ARRAY_SIZE(amp_gain_controls));
+ }
+}
+EXPORT_SYMBOL_GPL(simtec_audio_init);
+
+#define CODEC_CLOCK 12000000
+
+/**
+ * simtec_hw_params - update hardware parameters
+ * @substream: The audio substream instance.
+ * @params: The parameters requested.
+ *
+ * Update the codec data routing and configuration settings
+ * from the supplied data.
+ */
+static int simtec_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ int ret;
+
+ /* Set the CODEC as the bus clock master, I2S */
+ ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM);
+ if (ret) {
+ pr_err("%s: failed set cpu dai format\n", __func__);
+ return ret;
+ }
+
+ /* Set the CODEC as the bus clock master */
+ ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM);
+ if (ret) {
+ pr_err("%s: failed set codec dai format\n", __func__);
+ return ret;
+ }
+
+ ret = snd_soc_dai_set_sysclk(codec_dai, 0,
+ CODEC_CLOCK, SND_SOC_CLOCK_IN);
+ if (ret) {
+ pr_err( "%s: failed setting codec sysclk\n", __func__);
+ return ret;
+ }
+
+ if (pdata->use_mpllin) {
+ ret = snd_soc_dai_set_sysclk(cpu_dai, S3C24XX_CLKSRC_MPLL,
+ 0, SND_SOC_CLOCK_OUT);
+
+ if (ret) {
+ pr_err("%s: failed to set MPLLin as clksrc\n",
+ __func__);
+ return ret;
+ }
+ }
+
+ if (pdata->output_cdclk) {
+ int cdclk_scale;
+
+ cdclk_scale = clk_get_rate(xtal_clk) / CODEC_CLOCK;
+ cdclk_scale--;
+
+ ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
+ cdclk_scale);
+ }
+
+ return 0;
+}
+
+static int simtec_call_startup(struct s3c24xx_audio_simtec_pdata *pd)
+{
+ /* call any board supplied startup code, this currently only
+ * covers the bast/vr1000 which have a CPLD in the way of the
+ * LRCLK */
+ if (pd->startup)
+ pd->startup();
+
+ return 0;
+}
+
+static struct snd_soc_ops simtec_snd_ops = {
+ .hw_params = simtec_hw_params,
+};
+
+/**
+ * attach_gpio_amp - get and configure the necessary gpios
+ * @dev: The device we're probing.
+ * @pd: The platform data supplied by the board.
+ *
+ * If there is a GPIO based amplifier attached to the board, claim
+ * the necessary GPIO lines for it, and set default values.
+ */
+static int attach_gpio_amp(struct device *dev,
+ struct s3c24xx_audio_simtec_pdata *pd)
+{
+ int ret;
+
+ /* attach gpio amp gain (if any) */
+ if (pdata->amp_gain[0] > 0) {
+ ret = gpio_request(pd->amp_gain[0], "gpio-amp-gain0");
+ if (ret) {
+ dev_err(dev, "cannot get amp gpio gain0\n");
+ return ret;
+ }
+
+ ret = gpio_request(pd->amp_gain[1], "gpio-amp-gain1");
+ if (ret) {
+ dev_err(dev, "cannot get amp gpio gain1\n");
+ gpio_free(pdata->amp_gain[0]);
+ return ret;
+ }
+
+ gpio_direction_output(pd->amp_gain[0], 0);
+ gpio_direction_output(pd->amp_gain[1], 0);
+ }
+
+ /* note, curently we assume GPA0 isn't valid amp */
+ if (pdata->amp_gpio > 0) {
+ ret = gpio_request(pd->amp_gpio, "gpio-amp");
+ if (ret) {
+ dev_err(dev, "cannot get amp gpio %d (%d)\n",
+ pd->amp_gpio, ret);
+ goto err_amp;
+ }
+
+ /* set the amp off at startup */
+ spk_unmute_state(0);
+ }
+
+ return 0;
+
+err_amp:
+ if (pd->amp_gain[0] > 0) {
+ gpio_free(pd->amp_gain[0]);
+ gpio_free(pd->amp_gain[1]);
+ }
+
+ return ret;
+}
+
+static void detach_gpio_amp(struct s3c24xx_audio_simtec_pdata *pd)
+{
+ if (pd->amp_gain[0] > 0) {
+ gpio_free(pd->amp_gain[0]);
+ gpio_free(pd->amp_gain[1]);
+ }
+
+ if (pd->amp_gpio > 0)
+ gpio_free(pd->amp_gpio);
+}
+
+#ifdef CONFIG_PM
+int simtec_audio_resume(struct device *dev)
+{
+ simtec_call_startup(pdata);
+ return 0;
+}
+
+struct dev_pm_ops simtec_audio_pmops = {
+ .resume = simtec_audio_resume,
+};
+EXPORT_SYMBOL_GPL(simtec_audio_pmops);
+#endif
+
+int __devinit simtec_audio_core_probe(struct platform_device *pdev,
+ struct snd_soc_device *socdev)
+{
+ struct platform_device *snd_dev;
+ int ret;
+
+ socdev->card->dai_link->ops = &simtec_snd_ops;
+
+ pdata = pdev->dev.platform_data;
+ if (!pdata) {
+ dev_err(&pdev->dev, "no platform data supplied\n");
+ return -EINVAL;
+ }
+
+ simtec_call_startup(pdata);
+
+ xtal_clk = clk_get(&pdev->dev, "xtal");
+ if (IS_ERR(xtal_clk)) {
+ dev_err(&pdev->dev, "could not get clkout0\n");
+ return -EINVAL;
+ }
+
+ dev_info(&pdev->dev, "xtal rate is %ld\n", clk_get_rate(xtal_clk));
+
+ ret = attach_gpio_amp(&pdev->dev, pdata);
+ if (ret)
+ goto err_clk;
+
+ snd_dev = platform_device_alloc("soc-audio", -1);
+ if (!snd_dev) {
+ dev_err(&pdev->dev, "failed to alloc soc-audio devicec\n");
+ ret = -ENOMEM;
+ goto err_gpio;
+ }
+
+ platform_set_drvdata(snd_dev, socdev);
+ socdev->dev = &snd_dev->dev;
+
+ ret = platform_device_add(snd_dev);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add soc-audio dev\n");
+ goto err_pdev;
+ }
+
+ platform_set_drvdata(pdev, snd_dev);
+ return 0;
+
+err_pdev:
+ platform_device_put(snd_dev);
+
+err_gpio:
+ detach_gpio_amp(pdata);
+
+err_clk:
+ clk_put(xtal_clk);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(simtec_audio_core_probe);
+
+int __devexit simtec_audio_remove(struct platform_device *pdev)
+{
+ struct platform_device *snd_dev = platform_get_drvdata(pdev);
+
+ platform_device_unregister(snd_dev);
+
+ detach_gpio_amp(pdata);
+ clk_put(xtal_clk);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(simtec_audio_remove);
+
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("ALSA SoC Simtec Audio common support");
+MODULE_LICENSE("GPL");
--- /dev/null
+/* sound/soc/s3c24xx/s3c24xx_simtec.h
+ *
+ * Copyright 2009 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern void simtec_audio_init(struct snd_soc_codec *codec);
+
+extern int simtec_audio_core_probe(struct platform_device *pdev,
+ struct snd_soc_device *socdev);
+
+extern int simtec_audio_remove(struct platform_device *pdev);
+
+#ifdef CONFIG_PM
+extern struct dev_pm_ops simtec_audio_pmops;
+#define simtec_audio_pm &simtec_audio_pmops
+#else
+#define simtec_audio_pm NULL
+#endif
--- /dev/null
+/* sound/soc/s3c24xx/s3c24xx_simtec_hermes.c
+ *
+ * Copyright 2009 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <plat/audio-simtec.h>
+
+#include "s3c24xx-pcm.h"
+#include "s3c24xx-i2s.h"
+#include "s3c24xx_simtec.h"
+
+#include "../codecs/tlv320aic3x.h"
+
+static const struct snd_soc_dapm_widget dapm_widgets[] = {
+ SND_SOC_DAPM_LINE("GSM Out", NULL),
+ SND_SOC_DAPM_LINE("GSM In", NULL),
+ SND_SOC_DAPM_LINE("Line In", NULL),
+ SND_SOC_DAPM_LINE("Line Out", NULL),
+ SND_SOC_DAPM_LINE("ZV", NULL),
+ SND_SOC_DAPM_MIC("Mic Jack", NULL),
+ SND_SOC_DAPM_HP("Headphone Jack", NULL),
+};
+
+static const struct snd_soc_dapm_route base_map[] = {
+ /* Headphone connected to HP{L,R}OUT and HP{L,R}COM */
+
+ { "Headphone Jack", NULL, "HPLOUT" },
+ { "Headphone Jack", NULL, "HPLCOM" },
+ { "Headphone Jack", NULL, "HPROUT" },
+ { "Headphone Jack", NULL, "HPRCOM" },
+
+ /* ZV connected to Line1 */
+
+ { "LINE1L", NULL, "ZV" },
+ { "LINE1R", NULL, "ZV" },
+
+ /* Line In connected to Line2 */
+
+ { "LINE2L", NULL, "Line In" },
+ { "LINE2R", NULL, "Line In" },
+
+ /* Microphone connected to MIC3R and MIC_BIAS */
+
+ { "MIC3L", NULL, "Mic Jack" },
+
+ /* GSM connected to MONO_LOUT and MIC3L (in) */
+
+ { "GSM Out", NULL, "MONO_LOUT" },
+ { "MIC3L", NULL, "GSM In" },
+
+ /* Speaker is connected to LINEOUT{LN,LP,RN,RP}, however we are
+ * not using the DAPM to power it up and down as there it makes
+ * a click when powering up. */
+};
+
+/**
+ * simtec_hermes_init - initialise and add controls
+ * @codec; The codec instance to attach to.
+ *
+ * Attach our controls and configure the necessary codec
+ * mappings for our sound card instance.
+*/
+static int simtec_hermes_init(struct snd_soc_codec *codec)
+{
+ snd_soc_dapm_new_controls(codec, dapm_widgets,
+ ARRAY_SIZE(dapm_widgets));
+
+ snd_soc_dapm_add_routes(codec, base_map, ARRAY_SIZE(base_map));
+
+ snd_soc_dapm_enable_pin(codec, "Headphone Jack");
+ snd_soc_dapm_enable_pin(codec, "Line In");
+ snd_soc_dapm_enable_pin(codec, "Line Out");
+ snd_soc_dapm_enable_pin(codec, "Mic Jack");
+
+ simtec_audio_init(codec);
+ snd_soc_dapm_sync(codec);
+
+ return 0;
+}
+
+static struct aic3x_setup_data codec_setup = {
+};
+
+static struct snd_soc_dai_link simtec_dai_aic33 = {
+ .name = "tlv320aic33",
+ .stream_name = "TLV320AIC33",
+ .cpu_dai = &s3c24xx_i2s_dai,
+ .codec_dai = &aic3x_dai,
+ .init = simtec_hermes_init,
+};
+
+/* simtec audio machine driver */
+static struct snd_soc_card snd_soc_machine_simtec_aic33 = {
+ .name = "Simtec-Hermes",
+ .platform = &s3c24xx_soc_platform,
+ .dai_link = &simtec_dai_aic33,
+ .num_links = 1,
+};
+
+/* simtec audio subsystem */
+static struct snd_soc_device simtec_snd_devdata_aic33 = {
+ .card = &snd_soc_machine_simtec_aic33,
+ .codec_dev = &soc_codec_dev_aic3x,
+ .codec_data = &codec_setup,
+};
+
+static int __devinit simtec_audio_hermes_probe(struct platform_device *pd)
+{
+ dev_info(&pd->dev, "probing....\n");
+ return simtec_audio_core_probe(pd, &simtec_snd_devdata_aic33);
+}
+
+static struct platform_driver simtec_audio_hermes_platdrv = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "s3c24xx-simtec-hermes-snd",
+ .pm = simtec_audio_pm,
+ },
+ .probe = simtec_audio_hermes_probe,
+ .remove = __devexit_p(simtec_audio_remove),
+};
+
+MODULE_ALIAS("platform:s3c24xx-simtec-hermes-snd");
+
+static int __init simtec_hermes_modinit(void)
+{
+ return platform_driver_register(&simtec_audio_hermes_platdrv);
+}
+
+static void __exit simtec_hermes_modexit(void)
+{
+ platform_driver_unregister(&simtec_audio_hermes_platdrv);
+}
+
+module_init(simtec_hermes_modinit);
+module_exit(simtec_hermes_modexit);
+
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("ALSA SoC Simtec Audio support");
+MODULE_LICENSE("GPL");
--- /dev/null
+/* sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c
+ *
+ * Copyright 2009 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <plat/audio-simtec.h>
+
+#include "s3c24xx-pcm.h"
+#include "s3c24xx-i2s.h"
+#include "s3c24xx_simtec.h"
+
+#include "../codecs/tlv320aic23.h"
+
+/* supported machines:
+ *
+ * Machine Connections AMP
+ * ------- ----------- ---
+ * BAST MIC, HPOUT, LOUT, LIN TPA2001D1 (HPOUTL,R) (gain hardwired)
+ * VR1000 HPOUT, LIN None
+ * VR2000 LIN, LOUT, MIC, HP LM4871 (HPOUTL,R)
+ * DePicture LIN, LOUT, MIC, HP LM4871 (HPOUTL,R)
+ * Anubis LIN, LOUT, MIC, HP TPA2001D1 (HPOUTL,R)
+ */
+
+static const struct snd_soc_dapm_widget dapm_widgets[] = {
+ SND_SOC_DAPM_HP("Headphone Jack", NULL),
+ SND_SOC_DAPM_LINE("Line In", NULL),
+ SND_SOC_DAPM_LINE("Line Out", NULL),
+ SND_SOC_DAPM_MIC("Mic Jack", NULL),
+};
+
+static const struct snd_soc_dapm_route base_map[] = {
+ { "Headphone Jack", NULL, "LHPOUT"},
+ { "Headphone Jack", NULL, "RHPOUT"},
+
+ { "Line Out", NULL, "LOUT" },
+ { "Line Out", NULL, "ROUT" },
+
+ { "LLINEIN", NULL, "Line In"},
+ { "RLINEIN", NULL, "Line In"},
+
+ { "MICIN", NULL, "Mic Jack"},
+};
+
+/**
+ * simtec_tlv320aic23_init - initialise and add controls
+ * @codec; The codec instance to attach to.
+ *
+ * Attach our controls and configure the necessary codec
+ * mappings for our sound card instance.
+*/
+static int simtec_tlv320aic23_init(struct snd_soc_codec *codec)
+{
+ snd_soc_dapm_new_controls(codec, dapm_widgets,
+ ARRAY_SIZE(dapm_widgets));
+
+ snd_soc_dapm_add_routes(codec, base_map, ARRAY_SIZE(base_map));
+
+ snd_soc_dapm_enable_pin(codec, "Headphone Jack");
+ snd_soc_dapm_enable_pin(codec, "Line In");
+ snd_soc_dapm_enable_pin(codec, "Line Out");
+ snd_soc_dapm_enable_pin(codec, "Mic Jack");
+
+ simtec_audio_init(codec);
+ snd_soc_dapm_sync(codec);
+
+ return 0;
+}
+
+static struct snd_soc_dai_link simtec_dai_aic23 = {
+ .name = "tlv320aic23",
+ .stream_name = "TLV320AIC23",
+ .cpu_dai = &s3c24xx_i2s_dai,
+ .codec_dai = &tlv320aic23_dai,
+ .init = simtec_tlv320aic23_init,
+};
+
+/* simtec audio machine driver */
+static struct snd_soc_card snd_soc_machine_simtec_aic23 = {
+ .name = "Simtec",
+ .platform = &s3c24xx_soc_platform,
+ .dai_link = &simtec_dai_aic23,
+ .num_links = 1,
+};
+
+/* simtec audio subsystem */
+static struct snd_soc_device simtec_snd_devdata_aic23 = {
+ .card = &snd_soc_machine_simtec_aic23,
+ .codec_dev = &soc_codec_dev_tlv320aic23,
+};
+
+static int __devinit simtec_audio_tlv320aic23_probe(struct platform_device *pd)
+{
+ return simtec_audio_core_probe(pd, &simtec_snd_devdata_aic23);
+}
+
+static struct platform_driver simtec_audio_tlv320aic23_platdrv = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "s3c24xx-simtec-tlv320aic23",
+ .pm = simtec_audio_pm,
+ },
+ .probe = simtec_audio_tlv320aic23_probe,
+ .remove = __devexit_p(simtec_audio_remove),
+};
+
+MODULE_ALIAS("platform:s3c24xx-simtec-tlv320aic23");
+
+static int __init simtec_tlv320aic23_modinit(void)
+{
+ return platform_driver_register(&simtec_audio_tlv320aic23_platdrv);
+}
+
+static void __exit simtec_tlv320aic23_modexit(void)
+{
+ platform_driver_unregister(&simtec_audio_tlv320aic23_platdrv);
+}
+
+module_init(simtec_tlv320aic23_modinit);
+module_exit(simtec_tlv320aic23_modexit);
+
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("ALSA SoC Simtec Audio support");
+MODULE_LICENSE("GPL");
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/i2c.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
/* s6105 audio private data */
static struct aic3x_setup_data s6105_aic3x_setup = {
- .i2c_bus = 0,
- .i2c_address = 0x18,
};
/* s6105 audio subsystem */
static struct platform_device *s6105_snd_device;
+/* temporary i2c device creation until this can be moved into the machine
+ * support file.
+*/
+static struct i2c_board_info i2c_device[] = {
+ { I2C_BOARD_INFO("tlv320aic33", 0x18), }
+};
+
static int __init s6105_init(void)
{
int ret;
+ i2c_register_board_info(0, i2c_device, ARRAY_SIZE(i2c_device));
+
s6105_snd_device = platform_device_alloc("soc-audio", -1);
if (!s6105_snd_device)
return -ENOMEM;
config SND_SOC_SH4_SSI
tristate
-
+config SND_SOC_SH4_FSI
+ tristate "SH4 FSI support"
+ depends on CPU_SUBTYPE_SH7724
+ select SH_DMA
+ help
+ This option enables FSI sound support
##
## Boards
This option enables generic sound support for the first
AC97 unit of the SH7760.
+config SND_FSI_AK4642
+ bool "FSI-AK4642 sound support"
+ depends on SND_SOC_SH4_FSI
+ select SND_SOC_AK4642
+ help
+ This option enables generic sound support for the
+ FSI - AK4642 unit
+
endmenu
## audio units found on some SH-4
snd-soc-hac-objs := hac.o
snd-soc-ssi-objs := ssi.o
+snd-soc-fsi-objs := fsi.o
obj-$(CONFIG_SND_SOC_SH4_HAC) += snd-soc-hac.o
obj-$(CONFIG_SND_SOC_SH4_SSI) += snd-soc-ssi.o
+obj-$(CONFIG_SND_SOC_SH4_FSI) += snd-soc-fsi.o
## boards
snd-soc-sh7760-ac97-objs := sh7760-ac97.o
+snd-soc-fsi-ak4642-objs := fsi-ak4642.o
obj-$(CONFIG_SND_SH7760_AC97) += snd-soc-sh7760-ac97.o
+obj-$(CONFIG_SND_FSI_AK4642) += snd-soc-fsi-ak4642.o
--- /dev/null
+/*
+ * FSI-AK464x sound support for ms7724se
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <sound/sh_fsi.h>
+#include <../sound/soc/codecs/ak4642.h>
+
+static struct snd_soc_dai_link fsi_dai_link = {
+ .name = "AK4642",
+ .stream_name = "AK4642",
+ .cpu_dai = &fsi_soc_dai[0], /* fsi */
+ .codec_dai = &ak4642_dai,
+ .ops = NULL,
+};
+
+static struct snd_soc_card fsi_soc_card = {
+ .name = "FSI",
+ .platform = &fsi_soc_platform,
+ .dai_link = &fsi_dai_link,
+ .num_links = 1,
+};
+
+static struct snd_soc_device fsi_snd_devdata = {
+ .card = &fsi_soc_card,
+ .codec_dev = &soc_codec_dev_ak4642,
+};
+
+#define AK4642_BUS 0
+#define AK4642_ADR 0x12
+static int ak4642_add_i2c_device(void)
+{
+ struct i2c_board_info info;
+ struct i2c_adapter *adapter;
+ struct i2c_client *client;
+
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ info.addr = AK4642_ADR;
+ strlcpy(info.type, "ak4642", I2C_NAME_SIZE);
+
+ adapter = i2c_get_adapter(AK4642_BUS);
+ if (!adapter) {
+ printk(KERN_DEBUG "can't get i2c adapter\n");
+ return -ENODEV;
+ }
+
+ client = i2c_new_device(adapter, &info);
+ i2c_put_adapter(adapter);
+ if (!client) {
+ printk(KERN_DEBUG "can't add i2c device\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static struct platform_device *fsi_snd_device;
+
+static int __init fsi_ak4642_init(void)
+{
+ int ret = -ENOMEM;
+
+ ak4642_add_i2c_device();
+
+ fsi_snd_device = platform_device_alloc("soc-audio", -1);
+ if (!fsi_snd_device)
+ goto out;
+
+ platform_set_drvdata(fsi_snd_device,
+ &fsi_snd_devdata);
+ fsi_snd_devdata.dev = &fsi_snd_device->dev;
+ ret = platform_device_add(fsi_snd_device);
+
+ if (ret)
+ platform_device_put(fsi_snd_device);
+
+out:
+ return ret;
+}
+
+static void __exit fsi_ak4642_exit(void)
+{
+ platform_device_unregister(fsi_snd_device);
+}
+
+module_init(fsi_ak4642_init);
+module_exit(fsi_ak4642_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Generic SH4 FSI-AK4642 sound card");
+MODULE_AUTHOR("Kuninori Morimoto <morimoto.kuninori@renesas.com>");
--- /dev/null
+/*
+ * Fifo-attached Serial Interface (FSI) support for SH7724
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on ssi.c
+ * Copyright (c) 2007 Manuel Lauss <mano@roarinelk.homelinux.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+#include <sound/pcm_params.h>
+#include <sound/sh_fsi.h>
+#include <asm/atomic.h>
+#include <asm/dma.h>
+#include <asm/dma-sh.h>
+
+#define DO_FMT 0x0000
+#define DOFF_CTL 0x0004
+#define DOFF_ST 0x0008
+#define DI_FMT 0x000C
+#define DIFF_CTL 0x0010
+#define DIFF_ST 0x0014
+#define CKG1 0x0018
+#define CKG2 0x001C
+#define DIDT 0x0020
+#define DODT 0x0024
+#define MUTE_ST 0x0028
+#define REG_END MUTE_ST
+
+#define INT_ST 0x0200
+#define IEMSK 0x0204
+#define IMSK 0x0208
+#define MUTE 0x020C
+#define CLK_RST 0x0210
+#define SOFT_RST 0x0214
+#define MREG_START INT_ST
+#define MREG_END SOFT_RST
+
+/* DO_FMT */
+/* DI_FMT */
+#define CR_FMT(param) ((param) << 4)
+# define CR_MONO 0x0
+# define CR_MONO_D 0x1
+# define CR_PCM 0x2
+# define CR_I2S 0x3
+# define CR_TDM 0x4
+# define CR_TDM_D 0x5
+
+/* DOFF_CTL */
+/* DIFF_CTL */
+#define IRQ_HALF 0x00100000
+#define FIFO_CLR 0x00000001
+
+/* DOFF_ST */
+#define ERR_OVER 0x00000010
+#define ERR_UNDER 0x00000001
+
+/* CLK_RST */
+#define B_CLK 0x00000010
+#define A_CLK 0x00000001
+
+/* INT_ST */
+#define INT_B_IN (1 << 12)
+#define INT_B_OUT (1 << 8)
+#define INT_A_IN (1 << 4)
+#define INT_A_OUT (1 << 0)
+
+#define FSI_RATES SNDRV_PCM_RATE_8000_96000
+
+#define FSI_FMTS (SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S16_LE)
+
+/************************************************************************
+
+
+ struct
+
+
+************************************************************************/
+struct fsi_priv {
+ void __iomem *base;
+ struct snd_pcm_substream *substream;
+
+ int fifo_max;
+ int chan;
+ int dma_chan;
+
+ int byte_offset;
+ int period_len;
+ int buffer_len;
+ int periods;
+};
+
+struct fsi_master {
+ void __iomem *base;
+ int irq;
+ struct clk *clk;
+ struct fsi_priv fsia;
+ struct fsi_priv fsib;
+ struct sh_fsi_platform_info *info;
+};
+
+static struct fsi_master *master;
+
+/************************************************************************
+
+
+ basic read write function
+
+
+************************************************************************/
+static int __fsi_reg_write(u32 reg, u32 data)
+{
+ /* valid data area is 24bit */
+ data &= 0x00ffffff;
+
+ return ctrl_outl(data, reg);
+}
+
+static u32 __fsi_reg_read(u32 reg)
+{
+ return ctrl_inl(reg);
+}
+
+static int __fsi_reg_mask_set(u32 reg, u32 mask, u32 data)
+{
+ u32 val = __fsi_reg_read(reg);
+
+ val &= ~mask;
+ val |= data & mask;
+
+ return __fsi_reg_write(reg, val);
+}
+
+static int fsi_reg_write(struct fsi_priv *fsi, u32 reg, u32 data)
+{
+ if (reg > REG_END)
+ return -1;
+
+ return __fsi_reg_write((u32)(fsi->base + reg), data);
+}
+
+static u32 fsi_reg_read(struct fsi_priv *fsi, u32 reg)
+{
+ if (reg > REG_END)
+ return 0;
+
+ return __fsi_reg_read((u32)(fsi->base + reg));
+}
+
+static int fsi_reg_mask_set(struct fsi_priv *fsi, u32 reg, u32 mask, u32 data)
+{
+ if (reg > REG_END)
+ return -1;
+
+ return __fsi_reg_mask_set((u32)(fsi->base + reg), mask, data);
+}
+
+static int fsi_master_write(u32 reg, u32 data)
+{
+ if ((reg < MREG_START) ||
+ (reg > MREG_END))
+ return -1;
+
+ return __fsi_reg_write((u32)(master->base + reg), data);
+}
+
+static u32 fsi_master_read(u32 reg)
+{
+ if ((reg < MREG_START) ||
+ (reg > MREG_END))
+ return 0;
+
+ return __fsi_reg_read((u32)(master->base + reg));
+}
+
+static int fsi_master_mask_set(u32 reg, u32 mask, u32 data)
+{
+ if ((reg < MREG_START) ||
+ (reg > MREG_END))
+ return -1;
+
+ return __fsi_reg_mask_set((u32)(master->base + reg), mask, data);
+}
+
+/************************************************************************
+
+
+ basic function
+
+
+************************************************************************/
+static struct fsi_priv *fsi_get(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd;
+ struct fsi_priv *fsi = NULL;
+
+ if (!substream || !master)
+ return NULL;
+
+ rtd = substream->private_data;
+ switch (rtd->dai->cpu_dai->id) {
+ case 0:
+ fsi = &master->fsia;
+ break;
+ case 1:
+ fsi = &master->fsib;
+ break;
+ }
+
+ return fsi;
+}
+
+static int fsi_is_port_a(struct fsi_priv *fsi)
+{
+ /* return
+ * 1 : port a
+ * 0 : port b
+ */
+
+ if (fsi == &master->fsia)
+ return 1;
+
+ return 0;
+}
+
+static u32 fsi_get_info_flags(struct fsi_priv *fsi)
+{
+ int is_porta = fsi_is_port_a(fsi);
+
+ return is_porta ? master->info->porta_flags :
+ master->info->portb_flags;
+}
+
+static int fsi_is_master_mode(struct fsi_priv *fsi, int is_play)
+{
+ u32 mode;
+ u32 flags = fsi_get_info_flags(fsi);
+
+ mode = is_play ? SH_FSI_OUT_SLAVE_MODE : SH_FSI_IN_SLAVE_MODE;
+
+ /* return
+ * 1 : master mode
+ * 0 : slave mode
+ */
+
+ return (mode & flags) != mode;
+}
+
+static u32 fsi_port_ab_io_bit(struct fsi_priv *fsi, int is_play)
+{
+ int is_porta = fsi_is_port_a(fsi);
+ u32 data;
+
+ if (is_porta)
+ data = is_play ? (1 << 0) : (1 << 4);
+ else
+ data = is_play ? (1 << 8) : (1 << 12);
+
+ return data;
+}
+
+static void fsi_stream_push(struct fsi_priv *fsi,
+ struct snd_pcm_substream *substream,
+ u32 buffer_len,
+ u32 period_len)
+{
+ fsi->substream = substream;
+ fsi->buffer_len = buffer_len;
+ fsi->period_len = period_len;
+ fsi->byte_offset = 0;
+ fsi->periods = 0;
+}
+
+static void fsi_stream_pop(struct fsi_priv *fsi)
+{
+ fsi->substream = NULL;
+ fsi->buffer_len = 0;
+ fsi->period_len = 0;
+ fsi->byte_offset = 0;
+ fsi->periods = 0;
+}
+
+static int fsi_get_fifo_residue(struct fsi_priv *fsi, int is_play)
+{
+ u32 status;
+ u32 reg = is_play ? DOFF_ST : DIFF_ST;
+ int residue;
+
+ status = fsi_reg_read(fsi, reg);
+ residue = 0x1ff & (status >> 8);
+ residue *= fsi->chan;
+
+ return residue;
+}
+
+static int fsi_get_residue(struct fsi_priv *fsi, int is_play)
+{
+ int residue;
+ int width;
+ struct snd_pcm_runtime *runtime;
+
+ runtime = fsi->substream->runtime;
+
+ /* get 1 channel data width */
+ width = frames_to_bytes(runtime, 1) / fsi->chan;
+
+ if (2 == width)
+ residue = fsi_get_fifo_residue(fsi, is_play);
+ else
+ residue = get_dma_residue(fsi->dma_chan);
+
+ return residue;
+}
+
+/************************************************************************
+
+
+ basic dma function
+
+
+************************************************************************/
+#define PORTA_DMA 0
+#define PORTB_DMA 1
+
+static int fsi_get_dma_chan(void)
+{
+ if (0 != request_dma(PORTA_DMA, "fsia"))
+ return -EIO;
+
+ if (0 != request_dma(PORTB_DMA, "fsib")) {
+ free_dma(PORTA_DMA);
+ return -EIO;
+ }
+
+ master->fsia.dma_chan = PORTA_DMA;
+ master->fsib.dma_chan = PORTB_DMA;
+
+ return 0;
+}
+
+static void fsi_free_dma_chan(void)
+{
+ dma_wait_for_completion(PORTA_DMA);
+ dma_wait_for_completion(PORTB_DMA);
+ free_dma(PORTA_DMA);
+ free_dma(PORTB_DMA);
+
+ master->fsia.dma_chan = -1;
+ master->fsib.dma_chan = -1;
+}
+
+/************************************************************************
+
+
+ ctrl function
+
+
+************************************************************************/
+static void fsi_irq_enable(struct fsi_priv *fsi, int is_play)
+{
+ u32 data = fsi_port_ab_io_bit(fsi, is_play);
+
+ fsi_master_mask_set(IMSK, data, data);
+ fsi_master_mask_set(IEMSK, data, data);
+}
+
+static void fsi_irq_disable(struct fsi_priv *fsi, int is_play)
+{
+ u32 data = fsi_port_ab_io_bit(fsi, is_play);
+
+ fsi_master_mask_set(IMSK, data, 0);
+ fsi_master_mask_set(IEMSK, data, 0);
+}
+
+static void fsi_clk_ctrl(struct fsi_priv *fsi, int enable)
+{
+ u32 val = fsi_is_port_a(fsi) ? (1 << 0) : (1 << 4);
+
+ if (enable)
+ fsi_master_mask_set(CLK_RST, val, val);
+ else
+ fsi_master_mask_set(CLK_RST, val, 0);
+}
+
+static void fsi_irq_init(struct fsi_priv *fsi, int is_play)
+{
+ u32 data;
+ u32 ctrl;
+
+ data = fsi_port_ab_io_bit(fsi, is_play);
+ ctrl = is_play ? DOFF_CTL : DIFF_CTL;
+
+ /* set IMSK */
+ fsi_irq_disable(fsi, is_play);
+
+ /* set interrupt generation factor */
+ fsi_reg_write(fsi, ctrl, IRQ_HALF);
+
+ /* clear FIFO */
+ fsi_reg_mask_set(fsi, ctrl, FIFO_CLR, FIFO_CLR);
+
+ /* clear interrupt factor */
+ fsi_master_mask_set(INT_ST, data, 0);
+}
+
+static void fsi_soft_all_reset(void)
+{
+ u32 status = fsi_master_read(SOFT_RST);
+
+ /* port AB reset */
+ status &= 0x000000ff;
+ fsi_master_write(SOFT_RST, status);
+ mdelay(10);
+
+ /* soft reset */
+ status &= 0x000000f0;
+ fsi_master_write(SOFT_RST, status);
+ status |= 0x00000001;
+ fsi_master_write(SOFT_RST, status);
+ mdelay(10);
+}
+
+static void fsi_16data_push(struct fsi_priv *fsi,
+ struct snd_pcm_runtime *runtime,
+ int send)
+{
+ u16 *dma_start;
+ u32 snd;
+ int i;
+
+ /* get dma start position for FSI */
+ dma_start = (u16 *)runtime->dma_area;
+ dma_start += fsi->byte_offset / 2;
+
+ /*
+ * soft dma
+ * FSI can not use DMA when 16bpp
+ */
+ for (i = 0; i < send; i++) {
+ snd = (u32)dma_start[i];
+ fsi_reg_write(fsi, DODT, snd << 8);
+ }
+}
+
+static void fsi_32data_push(struct fsi_priv *fsi,
+ struct snd_pcm_runtime *runtime,
+ int send)
+{
+ u32 *dma_start;
+
+ /* get dma start position for FSI */
+ dma_start = (u32 *)runtime->dma_area;
+ dma_start += fsi->byte_offset / 4;
+
+ dma_wait_for_completion(fsi->dma_chan);
+ dma_configure_channel(fsi->dma_chan, (SM_INC|0x400|TS_32|TM_BUR));
+ dma_write(fsi->dma_chan, (u32)dma_start,
+ (u32)(fsi->base + DODT), send * 4);
+}
+
+/* playback interrupt */
+static int fsi_data_push(struct fsi_priv *fsi)
+{
+ struct snd_pcm_runtime *runtime;
+ struct snd_pcm_substream *substream = NULL;
+ int send;
+ int fifo_free;
+ int width;
+
+ if (!fsi ||
+ !fsi->substream ||
+ !fsi->substream->runtime)
+ return -EINVAL;
+
+ runtime = fsi->substream->runtime;
+
+ /* FSI FIFO has limit.
+ * So, this driver can not send periods data at a time
+ */
+ if (fsi->byte_offset >=
+ fsi->period_len * (fsi->periods + 1)) {
+
+ substream = fsi->substream;
+ fsi->periods = (fsi->periods + 1) % runtime->periods;
+
+ if (0 == fsi->periods)
+ fsi->byte_offset = 0;
+ }
+
+ /* get 1 channel data width */
+ width = frames_to_bytes(runtime, 1) / fsi->chan;
+
+ /* get send size for alsa */
+ send = (fsi->buffer_len - fsi->byte_offset) / width;
+
+ /* get FIFO free size */
+ fifo_free = (fsi->fifo_max * fsi->chan) - fsi_get_fifo_residue(fsi, 1);
+
+ /* size check */
+ if (fifo_free < send)
+ send = fifo_free;
+
+ if (2 == width)
+ fsi_16data_push(fsi, runtime, send);
+ else if (4 == width)
+ fsi_32data_push(fsi, runtime, send);
+ else
+ return -EINVAL;
+
+ fsi->byte_offset += send * width;
+
+ fsi_irq_enable(fsi, 1);
+
+ if (substream)
+ snd_pcm_period_elapsed(substream);
+
+ return 0;
+}
+
+static irqreturn_t fsi_interrupt(int irq, void *data)
+{
+ u32 status = fsi_master_read(SOFT_RST) & ~0x00000010;
+ u32 int_st = fsi_master_read(INT_ST);
+
+ /* clear irq status */
+ fsi_master_write(SOFT_RST, status);
+ fsi_master_write(SOFT_RST, status | 0x00000010);
+
+ if (int_st & INT_A_OUT)
+ fsi_data_push(&master->fsia);
+ if (int_st & INT_B_OUT)
+ fsi_data_push(&master->fsib);
+
+ fsi_master_write(INT_ST, 0x0000000);
+
+ return IRQ_HANDLED;
+}
+
+/************************************************************************
+
+
+ dai ops
+
+
+************************************************************************/
+static int fsi_dai_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct fsi_priv *fsi = fsi_get(substream);
+ const char *msg;
+ u32 flags = fsi_get_info_flags(fsi);
+ u32 fmt;
+ u32 reg;
+ u32 data;
+ int is_play = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK);
+ int is_master;
+ int ret = 0;
+
+ clk_enable(master->clk);
+
+ /* CKG1 */
+ data = is_play ? (1 << 0) : (1 << 4);
+ is_master = fsi_is_master_mode(fsi, is_play);
+ if (is_master)
+ fsi_reg_mask_set(fsi, CKG1, data, data);
+ else
+ fsi_reg_mask_set(fsi, CKG1, data, 0);
+
+ /* clock inversion (CKG2) */
+ data = 0;
+ switch (SH_FSI_INVERSION_MASK & flags) {
+ case SH_FSI_LRM_INV:
+ data = 1 << 12;
+ break;
+ case SH_FSI_BRM_INV:
+ data = 1 << 8;
+ break;
+ case SH_FSI_LRS_INV:
+ data = 1 << 4;
+ break;
+ case SH_FSI_BRS_INV:
+ data = 1 << 0;
+ break;
+ }
+ fsi_reg_write(fsi, CKG2, data);
+
+ /* do fmt, di fmt */
+ data = 0;
+ reg = is_play ? DO_FMT : DI_FMT;
+ fmt = is_play ? SH_FSI_GET_OFMT(flags) : SH_FSI_GET_IFMT(flags);
+ switch (fmt) {
+ case SH_FSI_FMT_MONO:
+ msg = "MONO";
+ data = CR_FMT(CR_MONO);
+ fsi->chan = 1;
+ break;
+ case SH_FSI_FMT_MONO_DELAY:
+ msg = "MONO Delay";
+ data = CR_FMT(CR_MONO_D);
+ fsi->chan = 1;
+ break;
+ case SH_FSI_FMT_PCM:
+ msg = "PCM";
+ data = CR_FMT(CR_PCM);
+ fsi->chan = 2;
+ break;
+ case SH_FSI_FMT_I2S:
+ msg = "I2S";
+ data = CR_FMT(CR_I2S);
+ fsi->chan = 2;
+ break;
+ case SH_FSI_FMT_TDM:
+ msg = "TDM";
+ data = CR_FMT(CR_TDM) | (fsi->chan - 1);
+ fsi->chan = is_play ?
+ SH_FSI_GET_CH_O(flags) : SH_FSI_GET_CH_I(flags);
+ break;
+ case SH_FSI_FMT_TDM_DELAY:
+ msg = "TDM Delay";
+ data = CR_FMT(CR_TDM_D) | (fsi->chan - 1);
+ fsi->chan = is_play ?
+ SH_FSI_GET_CH_O(flags) : SH_FSI_GET_CH_I(flags);
+ break;
+ default:
+ dev_err(dai->dev, "unknown format.\n");
+ return -EINVAL;
+ }
+
+ switch (fsi->chan) {
+ case 1:
+ fsi->fifo_max = 256;
+ break;
+ case 2:
+ fsi->fifo_max = 128;
+ break;
+ case 3:
+ case 4:
+ fsi->fifo_max = 64;
+ break;
+ case 5:
+ case 6:
+ case 7:
+ case 8:
+ fsi->fifo_max = 32;
+ break;
+ default:
+ dev_err(dai->dev, "channel size error.\n");
+ return -EINVAL;
+ }
+
+ fsi_reg_write(fsi, reg, data);
+ dev_dbg(dai->dev, "use %s format (%d channel) use %d DMAC\n",
+ msg, fsi->chan, fsi->dma_chan);
+
+ /*
+ * clear clk reset if master mode
+ */
+ if (is_master)
+ fsi_clk_ctrl(fsi, 1);
+
+ /* irq setting */
+ fsi_irq_init(fsi, is_play);
+
+ return ret;
+}
+
+static void fsi_dai_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct fsi_priv *fsi = fsi_get(substream);
+ int is_play = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
+
+ fsi_irq_disable(fsi, is_play);
+ fsi_clk_ctrl(fsi, 0);
+
+ clk_disable(master->clk);
+}
+
+static int fsi_dai_trigger(struct snd_pcm_substream *substream, int cmd,
+ struct snd_soc_dai *dai)
+{
+ struct fsi_priv *fsi = fsi_get(substream);
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ int is_play = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
+ int ret = 0;
+
+ /* capture not supported */
+ if (!is_play)
+ return -ENODEV;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ fsi_stream_push(fsi, substream,
+ frames_to_bytes(runtime, runtime->buffer_size),
+ frames_to_bytes(runtime, runtime->period_size));
+ ret = fsi_data_push(fsi);
+ break;
+ case SNDRV_PCM_TRIGGER_STOP:
+ fsi_irq_disable(fsi, is_play);
+ fsi_stream_pop(fsi);
+ break;
+ }
+
+ return ret;
+}
+
+static struct snd_soc_dai_ops fsi_dai_ops = {
+ .startup = fsi_dai_startup,
+ .shutdown = fsi_dai_shutdown,
+ .trigger = fsi_dai_trigger,
+};
+
+/************************************************************************
+
+
+ pcm ops
+
+
+************************************************************************/
+static struct snd_pcm_hardware fsi_pcm_hardware = {
+ .info = SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_PAUSE,
+ .formats = FSI_FMTS,
+ .rates = FSI_RATES,
+ .rate_min = 8000,
+ .rate_max = 192000,
+ .channels_min = 1,
+ .channels_max = 2,
+ .buffer_bytes_max = 64 * 1024,
+ .period_bytes_min = 32,
+ .period_bytes_max = 8192,
+ .periods_min = 1,
+ .periods_max = 32,
+ .fifo_size = 256,
+};
+
+static int fsi_pcm_open(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ int ret = 0;
+
+ snd_soc_set_runtime_hwparams(substream, &fsi_pcm_hardware);
+
+ ret = snd_pcm_hw_constraint_integer(runtime,
+ SNDRV_PCM_HW_PARAM_PERIODS);
+
+ return ret;
+}
+
+static int fsi_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *hw_params)
+{
+ return snd_pcm_lib_malloc_pages(substream,
+ params_buffer_bytes(hw_params));
+}
+
+static int fsi_hw_free(struct snd_pcm_substream *substream)
+{
+ return snd_pcm_lib_free_pages(substream);
+}
+
+static snd_pcm_uframes_t fsi_pointer(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct fsi_priv *fsi = fsi_get(substream);
+ int is_play = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
+ long location;
+
+ location = (fsi->byte_offset - 1) - fsi_get_residue(fsi, is_play);
+ if (location < 0)
+ location = 0;
+
+ return bytes_to_frames(runtime, location);
+}
+
+static struct snd_pcm_ops fsi_pcm_ops = {
+ .open = fsi_pcm_open,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = fsi_hw_params,
+ .hw_free = fsi_hw_free,
+ .pointer = fsi_pointer,
+};
+
+/************************************************************************
+
+
+ snd_soc_platform
+
+
+************************************************************************/
+#define PREALLOC_BUFFER (32 * 1024)
+#define PREALLOC_BUFFER_MAX (32 * 1024)
+
+static void fsi_pcm_free(struct snd_pcm *pcm)
+{
+ snd_pcm_lib_preallocate_free_for_all(pcm);
+}
+
+static int fsi_pcm_new(struct snd_card *card,
+ struct snd_soc_dai *dai,
+ struct snd_pcm *pcm)
+{
+ /*
+ * dont use SNDRV_DMA_TYPE_DEV, since it will oops the SH kernel
+ * in MMAP mode (i.e. aplay -M)
+ */
+ return snd_pcm_lib_preallocate_pages_for_all(
+ pcm,
+ SNDRV_DMA_TYPE_CONTINUOUS,
+ snd_dma_continuous_data(GFP_KERNEL),
+ PREALLOC_BUFFER, PREALLOC_BUFFER_MAX);
+}
+
+/************************************************************************
+
+
+ alsa struct
+
+
+************************************************************************/
+struct snd_soc_dai fsi_soc_dai[] = {
+ {
+ .name = "FSIA",
+ .id = 0,
+ .playback = {
+ .rates = FSI_RATES,
+ .formats = FSI_FMTS,
+ .channels_min = 1,
+ .channels_max = 8,
+ },
+ /* capture not supported */
+ .ops = &fsi_dai_ops,
+ },
+ {
+ .name = "FSIB",
+ .id = 1,
+ .playback = {
+ .rates = FSI_RATES,
+ .formats = FSI_FMTS,
+ .channels_min = 1,
+ .channels_max = 8,
+ },
+ /* capture not supported */
+ .ops = &fsi_dai_ops,
+ },
+};
+EXPORT_SYMBOL_GPL(fsi_soc_dai);
+
+struct snd_soc_platform fsi_soc_platform = {
+ .name = "fsi-pcm",
+ .pcm_ops = &fsi_pcm_ops,
+ .pcm_new = fsi_pcm_new,
+ .pcm_free = fsi_pcm_free,
+};
+EXPORT_SYMBOL_GPL(fsi_soc_platform);
+
+/************************************************************************
+
+
+ platform function
+
+
+************************************************************************/
+static int fsi_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ char clk_name[8];
+ unsigned int irq;
+ int ret;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ irq = platform_get_irq(pdev, 0);
+ if (!res || !irq) {
+ dev_err(&pdev->dev, "Not enough FSI platform resources.\n");
+ ret = -ENODEV;
+ goto exit;
+ }
+
+ master = kzalloc(sizeof(*master), GFP_KERNEL);
+ if (!master) {
+ dev_err(&pdev->dev, "Could not allocate master\n");
+ ret = -ENOMEM;
+ goto exit;
+ }
+
+ master->base = ioremap_nocache(res->start, resource_size(res));
+ if (!master->base) {
+ ret = -ENXIO;
+ dev_err(&pdev->dev, "Unable to ioremap FSI registers.\n");
+ goto exit_kfree;
+ }
+
+ master->irq = irq;
+ master->info = pdev->dev.platform_data;
+ master->fsia.base = master->base;
+ master->fsib.base = master->base + 0x40;
+
+ master->fsia.dma_chan = -1;
+ master->fsib.dma_chan = -1;
+
+ ret = fsi_get_dma_chan();
+ if (ret < 0) {
+ dev_err(&pdev->dev, "cannot get dma api\n");
+ goto exit_iounmap;
+ }
+
+ /* FSI is based on SPU mstp */
+ snprintf(clk_name, sizeof(clk_name), "spu%d", pdev->id);
+ master->clk = clk_get(NULL, clk_name);
+ if (IS_ERR(master->clk)) {
+ dev_err(&pdev->dev, "cannot get %s mstp\n", clk_name);
+ ret = -EIO;
+ goto exit_free_dma;
+ }
+
+ fsi_soc_dai[0].dev = &pdev->dev;
+ fsi_soc_dai[1].dev = &pdev->dev;
+
+ fsi_soft_all_reset();
+
+ ret = request_irq(irq, &fsi_interrupt, IRQF_DISABLED, "fsi", master);
+ if (ret) {
+ dev_err(&pdev->dev, "irq request err\n");
+ goto exit_free_dma;
+ }
+
+ ret = snd_soc_register_platform(&fsi_soc_platform);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "cannot snd soc register\n");
+ goto exit_free_irq;
+ }
+
+ return snd_soc_register_dais(fsi_soc_dai, ARRAY_SIZE(fsi_soc_dai));
+
+exit_free_irq:
+ free_irq(irq, master);
+exit_free_dma:
+ fsi_free_dma_chan();
+exit_iounmap:
+ iounmap(master->base);
+exit_kfree:
+ kfree(master);
+ master = NULL;
+exit:
+ return ret;
+}
+
+static int fsi_remove(struct platform_device *pdev)
+{
+ snd_soc_unregister_dais(fsi_soc_dai, ARRAY_SIZE(fsi_soc_dai));
+ snd_soc_unregister_platform(&fsi_soc_platform);
+
+ clk_put(master->clk);
+
+ fsi_free_dma_chan();
+
+ free_irq(master->irq, master);
+
+ iounmap(master->base);
+ kfree(master);
+ master = NULL;
+ return 0;
+}
+
+static struct platform_driver fsi_driver = {
+ .driver = {
+ .name = "sh_fsi",
+ },
+ .probe = fsi_probe,
+ .remove = fsi_remove,
+};
+
+static int __init fsi_mobile_init(void)
+{
+ return platform_driver_register(&fsi_driver);
+}
+
+static void __exit fsi_mobile_exit(void)
+{
+ platform_driver_unregister(&fsi_driver);
+}
+module_init(fsi_mobile_init);
+module_exit(fsi_mobile_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("SuperH onchip FSI audio driver");
+MODULE_AUTHOR("Kuninori Morimoto <morimoto.kuninori@renesas.com>");
--- /dev/null
+/*
+ * soc-cache.c -- ASoC register cache helpers
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/i2c.h>
+#include <linux/spi/spi.h>
+#include <sound/soc.h>
+
+static unsigned int snd_soc_7_9_read(struct snd_soc_codec *codec,
+ unsigned int reg)
+{
+ u16 *cache = codec->reg_cache;
+ if (reg >= codec->reg_cache_size)
+ return -1;
+ return cache[reg];
+}
+
+static int snd_soc_7_9_write(struct snd_soc_codec *codec, unsigned int reg,
+ unsigned int value)
+{
+ u16 *cache = codec->reg_cache;
+ u8 data[2];
+ int ret;
+
+ BUG_ON(codec->volatile_register);
+
+ data[0] = (reg << 1) | ((value >> 8) & 0x0001);
+ data[1] = value & 0x00ff;
+
+ if (reg < codec->reg_cache_size)
+ cache[reg] = value;
+ ret = codec->hw_write(codec->control_data, data, 2);
+ if (ret == 2)
+ return 0;
+ if (ret < 0)
+ return ret;
+ else
+ return -EIO;
+}
+
+#if defined(CONFIG_SPI_MASTER)
+static int snd_soc_7_9_spi_write(void *control_data, const char *data,
+ int len)
+{
+ struct spi_device *spi = control_data;
+ struct spi_transfer t;
+ struct spi_message m;
+ u8 msg[2];
+
+ if (len <= 0)
+ return 0;
+
+ msg[0] = data[0];
+ msg[1] = data[1];
+
+ spi_message_init(&m);
+ memset(&t, 0, (sizeof t));
+
+ t.tx_buf = &msg[0];
+ t.len = len;
+
+ spi_message_add_tail(&t, &m);
+ spi_sync(spi, &m);
+
+ return len;
+}
+#else
+#define snd_soc_7_9_spi_write NULL
+#endif
+
+static int snd_soc_8_16_write(struct snd_soc_codec *codec, unsigned int reg,
+ unsigned int value)
+{
+ u16 *reg_cache = codec->reg_cache;
+ u8 data[3];
+
+ data[0] = reg;
+ data[1] = (value >> 8) & 0xff;
+ data[2] = value & 0xff;
+
+ if (!snd_soc_codec_volatile_register(codec, reg))
+ reg_cache[reg] = value;
+
+ if (codec->hw_write(codec->control_data, data, 3) == 3)
+ return 0;
+ else
+ return -EIO;
+}
+
+static unsigned int snd_soc_8_16_read(struct snd_soc_codec *codec,
+ unsigned int reg)
+{
+ u16 *cache = codec->reg_cache;
+
+ if (reg >= codec->reg_cache_size ||
+ snd_soc_codec_volatile_register(codec, reg))
+ return codec->hw_read(codec, reg);
+ else
+ return cache[reg];
+}
+
+#if defined(CONFIG_I2C) || (defined(CONFIG_I2C_MODULE) && defined(MODULE))
+static unsigned int snd_soc_8_16_read_i2c(struct snd_soc_codec *codec,
+ unsigned int r)
+{
+ struct i2c_msg xfer[2];
+ u8 reg = r;
+ u16 data;
+ int ret;
+ struct i2c_client *client = codec->control_data;
+
+ /* Write register */
+ xfer[0].addr = client->addr;
+ xfer[0].flags = 0;
+ xfer[0].len = 1;
+ xfer[0].buf = ®
+
+ /* Read data */
+ xfer[1].addr = client->addr;
+ xfer[1].flags = I2C_M_RD;
+ xfer[1].len = 2;
+ xfer[1].buf = (u8 *)&data;
+
+ ret = i2c_transfer(client->adapter, xfer, 2);
+ if (ret != 2) {
+ dev_err(&client->dev, "i2c_transfer() returned %d\n", ret);
+ return 0;
+ }
+
+ return (data >> 8) | ((data & 0xff) << 8);
+}
+#else
+#define snd_soc_8_16_read_i2c NULL
+#endif
+
+static struct {
+ int addr_bits;
+ int data_bits;
+ int (*write)(struct snd_soc_codec *codec, unsigned int, unsigned int);
+ int (*spi_write)(void *, const char *, int);
+ unsigned int (*read)(struct snd_soc_codec *, unsigned int);
+ unsigned int (*i2c_read)(struct snd_soc_codec *, unsigned int);
+} io_types[] = {
+ { 7, 9, snd_soc_7_9_write, snd_soc_7_9_spi_write, snd_soc_7_9_read },
+ { 8, 16, snd_soc_8_16_write, NULL, snd_soc_8_16_read,
+ snd_soc_8_16_read_i2c },
+};
+
+/**
+ * snd_soc_codec_set_cache_io: Set up standard I/O functions.
+ *
+ * @codec: CODEC to configure.
+ * @type: Type of cache.
+ * @addr_bits: Number of bits of register address data.
+ * @data_bits: Number of bits of data per register.
+ * @control: Control bus used.
+ *
+ * Register formats are frequently shared between many I2C and SPI
+ * devices. In order to promote code reuse the ASoC core provides
+ * some standard implementations of CODEC read and write operations
+ * which can be set up using this function.
+ *
+ * The caller is responsible for allocating and initialising the
+ * actual cache.
+ *
+ * Note that at present this code cannot be used by CODECs with
+ * volatile registers.
+ */
+int snd_soc_codec_set_cache_io(struct snd_soc_codec *codec,
+ int addr_bits, int data_bits,
+ enum snd_soc_control_type control)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(io_types); i++)
+ if (io_types[i].addr_bits == addr_bits &&
+ io_types[i].data_bits == data_bits)
+ break;
+ if (i == ARRAY_SIZE(io_types)) {
+ printk(KERN_ERR
+ "No I/O functions for %d bit address %d bit data\n",
+ addr_bits, data_bits);
+ return -EINVAL;
+ }
+
+ codec->write = io_types[i].write;
+ codec->read = io_types[i].read;
+
+ switch (control) {
+ case SND_SOC_CUSTOM:
+ break;
+
+ case SND_SOC_I2C:
+#if defined(CONFIG_I2C) || (defined(CONFIG_I2C_MODULE) && defined(MODULE))
+ codec->hw_write = (hw_write_t)i2c_master_send;
+#endif
+ if (io_types[i].i2c_read)
+ codec->hw_read = io_types[i].i2c_read;
+ break;
+
+ case SND_SOC_SPI:
+ if (io_types[i].spi_write)
+ codec->hw_write = io_types[i].spi_write;
+ break;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(snd_soc_codec_set_cache_io);
#include <linux/bitops.h>
#include <linux/debugfs.h>
#include <linux/platform_device.h>
+#include <sound/ac97_codec.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#ifdef CONFIG_PM
/* powers down audio subsystem for suspend */
-static int soc_suspend(struct platform_device *pdev, pm_message_t state)
+static int soc_suspend(struct device *dev)
{
+ struct platform_device *pdev = to_platform_device(dev);
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct snd_soc_card *card = socdev->card;
struct snd_soc_platform *platform = card->platform;
snd_pcm_suspend_all(card->dai_link[i].pcm);
if (card->suspend_pre)
- card->suspend_pre(pdev, state);
+ card->suspend_pre(pdev, PMSG_SUSPEND);
for (i = 0; i < card->num_links; i++) {
struct snd_soc_dai *cpu_dai = card->dai_link[i].cpu_dai;
}
if (codec_dev->suspend)
- codec_dev->suspend(pdev, state);
+ codec_dev->suspend(pdev, PMSG_SUSPEND);
for (i = 0; i < card->num_links; i++) {
struct snd_soc_dai *cpu_dai = card->dai_link[i].cpu_dai;
}
if (card->suspend_post)
- card->suspend_post(pdev, state);
+ card->suspend_post(pdev, PMSG_SUSPEND);
return 0;
}
}
/* powers up audio subsystem after a suspend */
-static int soc_resume(struct platform_device *pdev)
+static int soc_resume(struct device *dev)
{
+ struct platform_device *pdev = to_platform_device(dev);
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct snd_soc_card *card = socdev->card;
struct snd_soc_dai *cpu_dai = card->dai_link[0].cpu_dai;
return 0;
}
+/**
+ * snd_soc_suspend_device: Notify core of device suspend
+ *
+ * @dev: Device being suspended.
+ *
+ * In order to ensure that the entire audio subsystem is suspended in a
+ * coordinated fashion ASoC devices should suspend themselves when
+ * called by ASoC. When the standard kernel suspend process asks the
+ * device to suspend it should call this function to initiate a suspend
+ * of the entire ASoC card.
+ *
+ * \note Currently this function is stubbed out.
+ */
+int snd_soc_suspend_device(struct device *dev)
+{
+ return 0;
+}
+EXPORT_SYMBOL_GPL(snd_soc_suspend_device);
+
+/**
+ * snd_soc_resume_device: Notify core of device resume
+ *
+ * @dev: Device being resumed.
+ *
+ * In order to ensure that the entire audio subsystem is resumed in a
+ * coordinated fashion ASoC devices should resume themselves when called
+ * by ASoC. When the standard kernel resume process asks the device
+ * to resume it should call this function. Once all the components of
+ * the card have notified that they are ready to be resumed the card
+ * will be resumed.
+ *
+ * \note Currently this function is stubbed out.
+ */
+int snd_soc_resume_device(struct device *dev)
+{
+ return 0;
+}
+EXPORT_SYMBOL_GPL(snd_soc_resume_device);
#else
#define soc_suspend NULL
#define soc_resume NULL
return 0;
}
+static int soc_poweroff(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_card *card = socdev->card;
+
+ if (!card->instantiated)
+ return 0;
+
+ /* Flush out pmdown_time work - we actually do want to run it
+ * now, we're shutting down so no imminent restart. */
+ run_delayed_work(&card->delayed_work);
+
+ snd_soc_dapm_shutdown(socdev);
+
+ return 0;
+}
+
+static struct dev_pm_ops soc_pm_ops = {
+ .suspend = soc_suspend,
+ .resume = soc_resume,
+ .poweroff = soc_poweroff,
+};
+
/* ASoC platform driver */
static struct platform_driver soc_driver = {
.driver = {
.name = "soc-audio",
.owner = THIS_MODULE,
+ .pm = &soc_pm_ops,
},
.probe = soc_probe,
.remove = soc_remove,
- .suspend = soc_suspend,
- .resume = soc_resume,
};
/* create a new pcm */
return ret;
}
+/**
+ * snd_soc_codec_volatile_register: Report if a register is volatile.
+ *
+ * @codec: CODEC to query.
+ * @reg: Register to query.
+ *
+ * Boolean function indiciating if a CODEC register is volatile.
+ */
+int snd_soc_codec_volatile_register(struct snd_soc_codec *codec, int reg)
+{
+ if (codec->volatile_register)
+ return codec->volatile_register(reg);
+ else
+ return 0;
+}
+EXPORT_SYMBOL_GPL(snd_soc_codec_volatile_register);
+
/* codec register dump */
static ssize_t soc_codec_reg_show(struct snd_soc_codec *codec, char *buf)
{
count += sprintf(buf, "%s registers\n", codec->name);
for (i = 0; i < codec->reg_cache_size; i += step) {
+ if (codec->readable_register && !codec->readable_register(i))
+ continue;
+
count += sprintf(buf + count, "%2x: ", i);
if (count >= PAGE_SIZE - 1)
break;
if (!codec->debugfs_pop_time)
printk(KERN_WARNING
"Failed to create pop time debugfs file\n");
+
+ codec->debugfs_dapm = debugfs_create_dir("dapm", debugfs_root);
+ if (!codec->debugfs_dapm)
+ printk(KERN_WARNING
+ "Failed to create DAPM debugfs directory\n");
+
+ snd_soc_dapm_debugfs_init(codec);
}
static void soc_cleanup_codec_debugfs(struct snd_soc_codec *codec)
{
+ debugfs_remove_recursive(codec->debugfs_dapm);
debugfs_remove(codec->debugfs_pop_time);
debugfs_remove(codec->debugfs_reg);
}
* Returns 1 for change else 0.
*/
int snd_soc_update_bits(struct snd_soc_codec *codec, unsigned short reg,
- unsigned short mask, unsigned short value)
+ unsigned int mask, unsigned int value)
{
int change;
- unsigned short old, new;
+ unsigned int old, new;
mutex_lock(&io_mutex);
old = snd_soc_read(codec, reg);
* Returns 1 for change else 0.
*/
int snd_soc_test_bits(struct snd_soc_codec *codec, unsigned short reg,
- unsigned short mask, unsigned short value)
+ unsigned int mask, unsigned int value)
{
int change;
- unsigned short old, new;
+ unsigned int old, new;
mutex_lock(&io_mutex);
old = snd_soc_read(codec, reg);
continue;
}
}
- if (card->dai_link[i].codec_dai->ac97_control)
+ if (card->dai_link[i].codec_dai->ac97_control) {
ac97 = 1;
+ snd_ac97_dev_add_pdata(codec->ac97,
+ card->dai_link[i].cpu_dai->ac97_pdata);
+ }
}
snprintf(codec->card->shortname, sizeof(codec->card->shortname),
"%s", card->name);
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
- unsigned short val, bitmask;
+ unsigned int val, bitmask;
for (bitmask = 1; bitmask < e->max; bitmask <<= 1)
;
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
- unsigned short val;
- unsigned short mask, bitmask;
+ unsigned int val;
+ unsigned int mask, bitmask;
for (bitmask = 1; bitmask < e->max; bitmask <<= 1)
;
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
- unsigned short reg_val, val, mux;
+ unsigned int reg_val, val, mux;
reg_val = snd_soc_read(codec, e->reg);
val = (reg_val >> e->shift_l) & e->mask;
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
- unsigned short val;
- unsigned short mask;
+ unsigned int val;
+ unsigned int mask;
if (ucontrol->value.enumerated.item[0] > e->max - 1)
return -EINVAL;
int max = mc->max;
unsigned int mask = (1 << fls(max)) - 1;
unsigned int invert = mc->invert;
- unsigned short val, val2, val_mask;
+ unsigned int val, val2, val_mask;
val = (ucontrol->value.integer.value[0] & mask);
if (invert)
unsigned int reg2 = mc->rreg;
unsigned int shift = mc->shift;
int max = mc->max;
- unsigned int mask = (1<<fls(max))-1;
+ unsigned int mask = (1 << fls(max)) - 1;
unsigned int invert = mc->invert;
ucontrol->value.integer.value[0] =
unsigned int mask = (1 << fls(max)) - 1;
unsigned int invert = mc->invert;
int err;
- unsigned short val, val2, val_mask;
+ unsigned int val, val2, val_mask;
val_mask = mask << shift;
val = (ucontrol->value.integer.value[0] & mask);
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
unsigned int reg = mc->reg;
int min = mc->min;
- unsigned short val;
+ unsigned int val;
val = (ucontrol->value.integer.value[0]+min) & 0xff;
val |= ((ucontrol->value.integer.value[1]+min) & 0xff) << 8;
/**
* snd_soc_dai_set_tdm_slot - configure DAI TDM.
* @dai: DAI
- * @mask: DAI specific mask representing used slots.
+ * @tx_mask: bitmask representing active TX slots.
+ * @rx_mask: bitmask representing active RX slots.
* @slots: Number of slots in use.
+ * @slot_width: Width in bits for each slot.
*
* Configures a DAI for TDM operation. Both mask and slots are codec and DAI
* specific.
*/
int snd_soc_dai_set_tdm_slot(struct snd_soc_dai *dai,
- unsigned int mask, int slots)
+ unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width)
{
if (dai->ops && dai->ops->set_tdm_slot)
- return dai->ops->set_tdm_slot(dai, mask, slots);
+ return dai->ops->set_tdm_slot(dai, tx_mask, rx_mask,
+ slots, slot_width);
else
return -EINVAL;
}
#include <linux/bitops.h>
#include <linux/platform_device.h>
#include <linux/jiffies.h>
+#include <linux/debugfs.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
/* dapm power sequences - make this per codec in the future */
static int dapm_up_seq[] = {
- snd_soc_dapm_pre, snd_soc_dapm_supply, snd_soc_dapm_micbias,
- snd_soc_dapm_mic, snd_soc_dapm_mux, snd_soc_dapm_value_mux,
- snd_soc_dapm_dac, snd_soc_dapm_mixer, snd_soc_dapm_mixer_named_ctl,
- snd_soc_dapm_pga, snd_soc_dapm_adc, snd_soc_dapm_hp, snd_soc_dapm_spk,
- snd_soc_dapm_post
+ [snd_soc_dapm_pre] = 0,
+ [snd_soc_dapm_supply] = 1,
+ [snd_soc_dapm_micbias] = 2,
+ [snd_soc_dapm_aif_in] = 3,
+ [snd_soc_dapm_aif_out] = 3,
+ [snd_soc_dapm_mic] = 4,
+ [snd_soc_dapm_mux] = 5,
+ [snd_soc_dapm_value_mux] = 5,
+ [snd_soc_dapm_dac] = 6,
+ [snd_soc_dapm_mixer] = 7,
+ [snd_soc_dapm_mixer_named_ctl] = 7,
+ [snd_soc_dapm_pga] = 8,
+ [snd_soc_dapm_adc] = 9,
+ [snd_soc_dapm_hp] = 10,
+ [snd_soc_dapm_spk] = 10,
+ [snd_soc_dapm_post] = 11,
};
static int dapm_down_seq[] = {
- snd_soc_dapm_pre, snd_soc_dapm_adc, snd_soc_dapm_hp, snd_soc_dapm_spk,
- snd_soc_dapm_pga, snd_soc_dapm_mixer_named_ctl, snd_soc_dapm_mixer,
- snd_soc_dapm_dac, snd_soc_dapm_mic, snd_soc_dapm_micbias,
- snd_soc_dapm_mux, snd_soc_dapm_value_mux, snd_soc_dapm_supply,
- snd_soc_dapm_post
+ [snd_soc_dapm_pre] = 0,
+ [snd_soc_dapm_adc] = 1,
+ [snd_soc_dapm_hp] = 2,
+ [snd_soc_dapm_spk] = 2,
+ [snd_soc_dapm_pga] = 4,
+ [snd_soc_dapm_mixer_named_ctl] = 5,
+ [snd_soc_dapm_mixer] = 5,
+ [snd_soc_dapm_dac] = 6,
+ [snd_soc_dapm_mic] = 7,
+ [snd_soc_dapm_micbias] = 8,
+ [snd_soc_dapm_mux] = 9,
+ [snd_soc_dapm_value_mux] = 9,
+ [snd_soc_dapm_aif_in] = 10,
+ [snd_soc_dapm_aif_out] = 10,
+ [snd_soc_dapm_supply] = 11,
+ [snd_soc_dapm_post] = 12,
};
static void pop_wait(u32 pop_time)
if (card->set_bias_level)
ret = card->set_bias_level(card, level);
- if (ret == 0 && codec->set_bias_level)
- ret = codec->set_bias_level(codec, level);
+ if (ret == 0) {
+ if (codec->set_bias_level)
+ ret = codec->set_bias_level(codec, level);
+ else
+ codec->bias_level = level;
+ }
return ret;
}
case snd_soc_dapm_micbias:
case snd_soc_dapm_vmid:
case snd_soc_dapm_supply:
+ case snd_soc_dapm_aif_in:
+ case snd_soc_dapm_aif_out:
p->connect = 1;
break;
/* does effect routing - dynamically connected */
static int dapm_update_bits(struct snd_soc_dapm_widget *widget)
{
int change, power;
- unsigned short old, new;
+ unsigned int old, new;
struct snd_soc_codec *codec = widget->codec;
/* check for valid widgets */
if (widget->id == snd_soc_dapm_supply)
return 0;
- if (widget->id == snd_soc_dapm_adc && widget->active)
- return 1;
+ switch (widget->id) {
+ case snd_soc_dapm_adc:
+ case snd_soc_dapm_aif_out:
+ if (widget->active)
+ return 1;
+ default:
+ break;
+ }
if (widget->connected) {
/* connected pin ? */
return 0;
/* active stream ? */
- if (widget->id == snd_soc_dapm_dac && widget->active)
- return 1;
+ switch (widget->id) {
+ case snd_soc_dapm_dac:
+ case snd_soc_dapm_aif_in:
+ if (widget->active)
+ return 1;
+ default:
+ break;
+ }
if (widget->connected) {
/* connected pin ? */
return power;
}
-/*
- * Scan a single DAPM widget for a complete audio path and update the
- * power status appropriately.
- */
-static int dapm_power_widget(struct snd_soc_codec *codec, int event,
- struct snd_soc_dapm_widget *w)
+static int dapm_seq_compare(struct snd_soc_dapm_widget *a,
+ struct snd_soc_dapm_widget *b,
+ int sort[])
{
- int ret;
+ if (sort[a->id] != sort[b->id])
+ return sort[a->id] - sort[b->id];
+ if (a->reg != b->reg)
+ return a->reg - b->reg;
- switch (w->id) {
- case snd_soc_dapm_pre:
- if (!w->event)
- return 0;
+ return 0;
+}
- if (event == SND_SOC_DAPM_STREAM_START) {
- ret = w->event(w,
- NULL, SND_SOC_DAPM_PRE_PMU);
+/* Insert a widget in order into a DAPM power sequence. */
+static void dapm_seq_insert(struct snd_soc_dapm_widget *new_widget,
+ struct list_head *list,
+ int sort[])
+{
+ struct snd_soc_dapm_widget *w;
+
+ list_for_each_entry(w, list, power_list)
+ if (dapm_seq_compare(new_widget, w, sort) < 0) {
+ list_add_tail(&new_widget->power_list, &w->power_list);
+ return;
+ }
+
+ list_add_tail(&new_widget->power_list, list);
+}
+
+/* Apply the coalesced changes from a DAPM sequence */
+static void dapm_seq_run_coalesced(struct snd_soc_codec *codec,
+ struct list_head *pending)
+{
+ struct snd_soc_dapm_widget *w;
+ int reg, power, ret;
+ unsigned int value = 0;
+ unsigned int mask = 0;
+ unsigned int cur_mask;
+
+ reg = list_first_entry(pending, struct snd_soc_dapm_widget,
+ power_list)->reg;
+
+ list_for_each_entry(w, pending, power_list) {
+ cur_mask = 1 << w->shift;
+ BUG_ON(reg != w->reg);
+
+ if (w->invert)
+ power = !w->power;
+ else
+ power = w->power;
+
+ mask |= cur_mask;
+ if (power)
+ value |= cur_mask;
+
+ pop_dbg(codec->pop_time,
+ "pop test : Queue %s: reg=0x%x, 0x%x/0x%x\n",
+ w->name, reg, value, mask);
+
+ /* power up pre event */
+ if (w->power && w->event &&
+ (w->event_flags & SND_SOC_DAPM_PRE_PMU)) {
+ pop_dbg(codec->pop_time, "pop test : %s PRE_PMU\n",
+ w->name);
+ ret = w->event(w, NULL, SND_SOC_DAPM_PRE_PMU);
if (ret < 0)
- return ret;
- } else if (event == SND_SOC_DAPM_STREAM_STOP) {
- ret = w->event(w,
- NULL, SND_SOC_DAPM_PRE_PMD);
+ pr_err("%s: pre event failed: %d\n",
+ w->name, ret);
+ }
+
+ /* power down pre event */
+ if (!w->power && w->event &&
+ (w->event_flags & SND_SOC_DAPM_PRE_PMD)) {
+ pop_dbg(codec->pop_time, "pop test : %s PRE_PMD\n",
+ w->name);
+ ret = w->event(w, NULL, SND_SOC_DAPM_PRE_PMD);
if (ret < 0)
- return ret;
+ pr_err("%s: pre event failed: %d\n",
+ w->name, ret);
}
- return 0;
- case snd_soc_dapm_post:
- if (!w->event)
- return 0;
+ /* Lower PGA volume to reduce pops */
+ if (w->id == snd_soc_dapm_pga && !w->power)
+ dapm_set_pga(w, w->power);
+ }
- if (event == SND_SOC_DAPM_STREAM_START) {
+ if (reg >= 0) {
+ pop_dbg(codec->pop_time,
+ "pop test : Applying 0x%x/0x%x to %x in %dms\n",
+ value, mask, reg, codec->pop_time);
+ pop_wait(codec->pop_time);
+ snd_soc_update_bits(codec, reg, mask, value);
+ }
+
+ list_for_each_entry(w, pending, power_list) {
+ /* Raise PGA volume to reduce pops */
+ if (w->id == snd_soc_dapm_pga && w->power)
+ dapm_set_pga(w, w->power);
+
+ /* power up post event */
+ if (w->power && w->event &&
+ (w->event_flags & SND_SOC_DAPM_POST_PMU)) {
+ pop_dbg(codec->pop_time, "pop test : %s POST_PMU\n",
+ w->name);
ret = w->event(w,
NULL, SND_SOC_DAPM_POST_PMU);
if (ret < 0)
- return ret;
- } else if (event == SND_SOC_DAPM_STREAM_STOP) {
- ret = w->event(w,
- NULL, SND_SOC_DAPM_POST_PMD);
+ pr_err("%s: post event failed: %d\n",
+ w->name, ret);
+ }
+
+ /* power down post event */
+ if (!w->power && w->event &&
+ (w->event_flags & SND_SOC_DAPM_POST_PMD)) {
+ pop_dbg(codec->pop_time, "pop test : %s POST_PMD\n",
+ w->name);
+ ret = w->event(w, NULL, SND_SOC_DAPM_POST_PMD);
if (ret < 0)
- return ret;
+ pr_err("%s: post event failed: %d\n",
+ w->name, ret);
}
- return 0;
+ }
+}
- default:
- return dapm_generic_apply_power(w);
+/* Apply a DAPM power sequence.
+ *
+ * We walk over a pre-sorted list of widgets to apply power to. In
+ * order to minimise the number of writes to the device required
+ * multiple widgets will be updated in a single write where possible.
+ * Currently anything that requires more than a single write is not
+ * handled.
+ */
+static void dapm_seq_run(struct snd_soc_codec *codec, struct list_head *list,
+ int event, int sort[])
+{
+ struct snd_soc_dapm_widget *w, *n;
+ LIST_HEAD(pending);
+ int cur_sort = -1;
+ int cur_reg = SND_SOC_NOPM;
+ int ret;
+
+ list_for_each_entry_safe(w, n, list, power_list) {
+ ret = 0;
+
+ /* Do we need to apply any queued changes? */
+ if (sort[w->id] != cur_sort || w->reg != cur_reg) {
+ if (!list_empty(&pending))
+ dapm_seq_run_coalesced(codec, &pending);
+
+ INIT_LIST_HEAD(&pending);
+ cur_sort = -1;
+ cur_reg = SND_SOC_NOPM;
+ }
+
+ switch (w->id) {
+ case snd_soc_dapm_pre:
+ if (!w->event)
+ list_for_each_entry_safe_continue(w, n, list,
+ power_list);
+
+ if (event == SND_SOC_DAPM_STREAM_START)
+ ret = w->event(w,
+ NULL, SND_SOC_DAPM_PRE_PMU);
+ else if (event == SND_SOC_DAPM_STREAM_STOP)
+ ret = w->event(w,
+ NULL, SND_SOC_DAPM_PRE_PMD);
+ break;
+
+ case snd_soc_dapm_post:
+ if (!w->event)
+ list_for_each_entry_safe_continue(w, n, list,
+ power_list);
+
+ if (event == SND_SOC_DAPM_STREAM_START)
+ ret = w->event(w,
+ NULL, SND_SOC_DAPM_POST_PMU);
+ else if (event == SND_SOC_DAPM_STREAM_STOP)
+ ret = w->event(w,
+ NULL, SND_SOC_DAPM_POST_PMD);
+ break;
+
+ case snd_soc_dapm_input:
+ case snd_soc_dapm_output:
+ case snd_soc_dapm_hp:
+ case snd_soc_dapm_mic:
+ case snd_soc_dapm_line:
+ case snd_soc_dapm_spk:
+ /* No register support currently */
+ ret = dapm_generic_apply_power(w);
+ break;
+
+ default:
+ /* Queue it up for application */
+ cur_sort = sort[w->id];
+ cur_reg = w->reg;
+ list_move(&w->power_list, &pending);
+ break;
+ }
+
+ if (ret < 0)
+ pr_err("Failed to apply widget power: %d\n",
+ ret);
}
+
+ if (!list_empty(&pending))
+ dapm_seq_run_coalesced(codec, &pending);
}
/*
{
struct snd_soc_device *socdev = codec->socdev;
struct snd_soc_dapm_widget *w;
+ LIST_HEAD(up_list);
+ LIST_HEAD(down_list);
int ret = 0;
- int i, power;
+ int power;
int sys_power = 0;
- INIT_LIST_HEAD(&codec->up_list);
- INIT_LIST_HEAD(&codec->down_list);
-
/* Check which widgets we need to power and store them in
* lists indicating if they should be powered up or down.
*/
list_for_each_entry(w, &codec->dapm_widgets, list) {
switch (w->id) {
case snd_soc_dapm_pre:
- list_add_tail(&codec->down_list, &w->power_list);
+ dapm_seq_insert(w, &down_list, dapm_down_seq);
break;
case snd_soc_dapm_post:
- list_add_tail(&codec->up_list, &w->power_list);
+ dapm_seq_insert(w, &up_list, dapm_up_seq);
break;
default:
continue;
if (power)
- list_add_tail(&w->power_list, &codec->up_list);
+ dapm_seq_insert(w, &up_list, dapm_up_seq);
else
- list_add_tail(&w->power_list,
- &codec->down_list);
+ dapm_seq_insert(w, &down_list, dapm_down_seq);
w->power = power;
break;
}
}
+ /* If there are no DAPM widgets then try to figure out power from the
+ * event type.
+ */
+ if (list_empty(&codec->dapm_widgets)) {
+ switch (event) {
+ case SND_SOC_DAPM_STREAM_START:
+ case SND_SOC_DAPM_STREAM_RESUME:
+ sys_power = 1;
+ break;
+ case SND_SOC_DAPM_STREAM_NOP:
+ sys_power = codec->bias_level != SND_SOC_BIAS_STANDBY;
+ default:
+ break;
+ }
+ }
+
/* If we're changing to all on or all off then prepare */
if ((sys_power && codec->bias_level == SND_SOC_BIAS_STANDBY) ||
(!sys_power && codec->bias_level == SND_SOC_BIAS_ON)) {
}
/* Power down widgets first; try to avoid amplifying pops. */
- for (i = 0; i < ARRAY_SIZE(dapm_down_seq); i++) {
- list_for_each_entry(w, &codec->down_list, power_list) {
- /* is widget in stream order */
- if (w->id != dapm_down_seq[i])
- continue;
-
- ret = dapm_power_widget(codec, event, w);
- if (ret != 0)
- pr_err("Failed to power down %s: %d\n",
- w->name, ret);
- }
- }
+ dapm_seq_run(codec, &down_list, event, dapm_down_seq);
/* Now power up. */
- for (i = 0; i < ARRAY_SIZE(dapm_up_seq); i++) {
- list_for_each_entry(w, &codec->up_list, power_list) {
- /* is widget in stream order */
- if (w->id != dapm_up_seq[i])
- continue;
-
- ret = dapm_power_widget(codec, event, w);
- if (ret != 0)
- pr_err("Failed to power up %s: %d\n",
- w->name, ret);
- }
- }
+ dapm_seq_run(codec, &up_list, event, dapm_up_seq);
/* If we just powered the last thing off drop to standby bias */
if (codec->bias_level == SND_SOC_BIAS_PREPARE && !sys_power) {
pr_err("Failed to apply active bias: %d\n", ret);
}
+ pop_dbg(codec->pop_time, "DAPM sequencing finished, waiting %dms\n",
+ codec->pop_time);
+
return 0;
}
case snd_soc_dapm_mixer:
case snd_soc_dapm_mixer_named_ctl:
case snd_soc_dapm_supply:
+ case snd_soc_dapm_aif_in:
+ case snd_soc_dapm_aif_out:
if (w->name) {
in = is_connected_input_ep(w);
dapm_clear_walk(w->codec);
}
#endif
+#ifdef CONFIG_DEBUG_FS
+static int dapm_widget_power_open_file(struct inode *inode, struct file *file)
+{
+ file->private_data = inode->i_private;
+ return 0;
+}
+
+static ssize_t dapm_widget_power_read_file(struct file *file,
+ char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct snd_soc_dapm_widget *w = file->private_data;
+ char *buf;
+ int in, out;
+ ssize_t ret;
+ struct snd_soc_dapm_path *p = NULL;
+
+ buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ in = is_connected_input_ep(w);
+ dapm_clear_walk(w->codec);
+ out = is_connected_output_ep(w);
+ dapm_clear_walk(w->codec);
+
+ ret = snprintf(buf, PAGE_SIZE, "%s: %s in %d out %d\n",
+ w->name, w->power ? "On" : "Off", in, out);
+
+ if (w->active && w->sname)
+ ret += snprintf(buf, PAGE_SIZE - ret, " stream %s active\n",
+ w->sname);
+
+ list_for_each_entry(p, &w->sources, list_sink) {
+ if (p->connect)
+ ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ " in %s %s\n",
+ p->name ? p->name : "static",
+ p->source->name);
+ }
+ list_for_each_entry(p, &w->sinks, list_source) {
+ if (p->connect)
+ ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ " out %s %s\n",
+ p->name ? p->name : "static",
+ p->sink->name);
+ }
+
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret);
+
+ kfree(buf);
+ return ret;
+}
+
+static const struct file_operations dapm_widget_power_fops = {
+ .open = dapm_widget_power_open_file,
+ .read = dapm_widget_power_read_file,
+};
+
+void snd_soc_dapm_debugfs_init(struct snd_soc_codec *codec)
+{
+ struct snd_soc_dapm_widget *w;
+ struct dentry *d;
+
+ if (!codec->debugfs_dapm)
+ return;
+
+ list_for_each_entry(w, &codec->dapm_widgets, list) {
+ if (!w->name)
+ continue;
+
+ d = debugfs_create_file(w->name, 0444,
+ codec->debugfs_dapm, w,
+ &dapm_widget_power_fops);
+ if (!d)
+ printk(KERN_WARNING
+ "ASoC: Failed to create %s debugfs file\n",
+ w->name);
+ }
+}
+#else
+void snd_soc_dapm_debugfs_init(struct snd_soc_codec *codec)
+{
+}
+#endif
+
/* test and update the power status of a mux widget */
static int dapm_mux_update_power(struct snd_soc_dapm_widget *widget,
struct snd_kcontrol *kcontrol, int mask,
if (wsink->id == snd_soc_dapm_input) {
if (wsource->id == snd_soc_dapm_micbias ||
wsource->id == snd_soc_dapm_mic ||
- wsink->id == snd_soc_dapm_line ||
- wsink->id == snd_soc_dapm_output)
+ wsource->id == snd_soc_dapm_line ||
+ wsource->id == snd_soc_dapm_output)
wsink->ext = 1;
}
if (wsource->id == snd_soc_dapm_output) {
case snd_soc_dapm_pre:
case snd_soc_dapm_post:
case snd_soc_dapm_supply:
+ case snd_soc_dapm_aif_in:
+ case snd_soc_dapm_aif_out:
list_add(&path->list, &codec->dapm_paths);
list_add(&path->list_sink, &wsink->sources);
list_add(&path->list_source, &wsource->sinks);
dapm_new_mux(codec, w);
break;
case snd_soc_dapm_adc:
+ case snd_soc_dapm_aif_out:
w->power_check = dapm_adc_check_power;
break;
case snd_soc_dapm_dac:
+ case snd_soc_dapm_aif_in:
w->power_check = dapm_dac_check_power;
break;
case snd_soc_dapm_pga:
int max = mc->max;
unsigned int mask = (1 << fls(max)) - 1;
unsigned int invert = mc->invert;
- unsigned short val, val2, val_mask;
+ unsigned int val, val2, val_mask;
int ret;
val = (ucontrol->value.integer.value[0] & mask);
{
struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol);
struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
- unsigned short val, bitmask;
+ unsigned int val, bitmask;
for (bitmask = 1; bitmask < e->max; bitmask <<= 1)
;
{
struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol);
struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
- unsigned short val, mux;
- unsigned short mask, bitmask;
+ unsigned int val, mux;
+ unsigned int mask, bitmask;
int ret = 0;
for (bitmask = 1; bitmask < e->max; bitmask <<= 1)
{
struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol);
struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
- unsigned short reg_val, val, mux;
+ unsigned int reg_val, val, mux;
reg_val = snd_soc_read(widget->codec, e->reg);
val = (reg_val >> e->shift_l) & e->mask;
{
struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol);
struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
- unsigned short val, mux;
- unsigned short mask;
+ unsigned int val, mux;
+ unsigned int mask;
int ret = 0;
if (ucontrol->value.enumerated.item[0] > e->max - 1)
}
EXPORT_SYMBOL_GPL(snd_soc_dapm_free);
+/*
+ * snd_soc_dapm_shutdown - callback for system shutdown
+ */
+void snd_soc_dapm_shutdown(struct snd_soc_device *socdev)
+{
+ struct snd_soc_codec *codec = socdev->card->codec;
+ struct snd_soc_dapm_widget *w;
+ LIST_HEAD(down_list);
+ int powerdown = 0;
+
+ list_for_each_entry(w, &codec->dapm_widgets, list) {
+ if (w->power) {
+ dapm_seq_insert(w, &down_list, dapm_down_seq);
+ w->power = 0;
+ powerdown = 1;
+ }
+ }
+
+ /* If there were no widgets to power down we're already in
+ * standby.
+ */
+ if (powerdown) {
+ snd_soc_dapm_set_bias_level(socdev, SND_SOC_BIAS_PREPARE);
+ dapm_seq_run(codec, &down_list, 0, dapm_down_seq);
+ snd_soc_dapm_set_bias_level(socdev, SND_SOC_BIAS_STANDBY);
+ }
+
+ snd_soc_dapm_set_bias_level(socdev, SND_SOC_BIAS_OFF);
+}
+
/* Module information */
MODULE_AUTHOR("Liam Girdwood, lrg@slimlogic.co.uk");
MODULE_DESCRIPTION("Dynamic Audio Power Management core for ALSA SoC");
oldstatus = jack->status;
jack->status &= ~mask;
- jack->status |= status;
+ jack->status |= status & mask;
- /* The DAPM sync is expensive enough to be worth skipping */
- if (jack->status == oldstatus)
+ /* The DAPM sync is expensive enough to be worth skipping.
+ * However, empty mask means pin synchronization is desired. */
+ if (mask && (jack->status == oldstatus))
goto out;
list_for_each_entry(pin, &jack->pins, list) {
- enable = pin->mask & status;
+ enable = pin->mask & jack->status;
if (pin->invert)
enable = !enable;
if (ret)
goto err;
+ INIT_WORK(&gpios[i].work, gpio_work);
+ gpios[i].jack = jack;
+
ret = request_irq(gpio_to_irq(gpios[i].gpio),
gpio_handler,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
if (ret)
goto err;
- INIT_WORK(&gpios[i].work, gpio_work);
- gpios[i].jack = jack;
+#ifdef CONFIG_GPIO_SYSFS
+ /* Expose GPIO value over sysfs for diagnostic purposes */
+ gpio_export(gpios[i].gpio, false);
+#endif
+
+ /* Update initial jack status */
+ snd_soc_jack_gpio_detect(&gpios[i]);
}
return 0;
int i;
for (i = 0; i < count; i++) {
+#ifdef CONFIG_GPIO_SYSFS
+ gpio_unexport(gpios[i].gpio);
+#endif
free_irq(gpio_to_irq(gpios[i].gpio), &gpios[i]);
gpio_free(gpios[i].gpio);
gpios[i].jack = NULL;
static bool filter(struct dma_chan *chan, void *param)
{
struct txx9aclc_dmadata *dmadata = param;
- char devname[20 + 2]; /* FIXME: old BUS_ID_SIZE + 2 */
+ char *devname;
+ bool found = false;
- snprintf(devname, sizeof(devname), "%s.%d", dmadata->dma_res->name,
+ devname = kasprintf(GFP_KERNEL, "%s.%d", dmadata->dma_res->name,
(int)dmadata->dma_res->start);
if (strcmp(dev_name(chan->device->dev), devname) == 0) {
chan->private = &dmadata->dma_slave;
- return true;
+ found = true;
}
- return false;
+ kfree(devname);
+ return found;
}
static int txx9aclc_dma_init(struct txx9aclc_soc_device *dev,
extern int msnd_pinnacle_init(void);
#endif
+/*
+ * By default, OSS sound_core claims full legacy minor range (0-255)
+ * of SOUND_MAJOR to trap open attempts to any sound minor and
+ * requests modules using custom sound-slot/service-* module aliases.
+ * The only benefit of doing this is allowing use of custom module
+ * aliases instead of the standard char-major-* ones. This behavior
+ * prevents alternative OSS implementation and is scheduled to be
+ * removed.
+ *
+ * CONFIG_SOUND_OSS_CORE_PRECLAIM and soundcore.preclaim_oss kernel
+ * parameter are added to allow distros and developers to try and
+ * switch to alternative implementations without needing to rebuild
+ * the kernel in the meantime. If preclaim_oss is non-zero, the
+ * kernel will behave the same as before. All SOUND_MAJOR minors are
+ * preclaimed and the custom module aliases along with standard chrdev
+ * ones are emitted if a missing device is opened. If preclaim_oss is
+ * zero, sound_core only grabs what's actually in use and for missing
+ * devices only the standard chrdev aliases are requested.
+ *
+ * All these clutters are scheduled to be removed along with
+ * sound-slot/service-* module aliases. Please take a look at
+ * feature-removal-schedule.txt for details.
+ */
+#ifdef CONFIG_SOUND_OSS_CORE_PRECLAIM
+static int preclaim_oss = 1;
+#else
+static int preclaim_oss = 0;
+#endif
+
+module_param(preclaim_oss, int, 0444);
+
+static int soundcore_open(struct inode *, struct file *);
+
+static const struct file_operations soundcore_fops =
+{
+ /* We must have an owner or the module locking fails */
+ .owner = THIS_MODULE,
+ .open = soundcore_open,
+};
+
/*
* Low level list operator. Scan the ordered list, find a hole and
* join into it. Called with the lock asserted
if (!s)
return -ENOMEM;
-
+
spin_lock(&sound_loader_lock);
+retry:
r = __sound_insert_unit(s, list, fops, index, low, top);
spin_unlock(&sound_loader_lock);
else
sprintf(s->name, "sound/%s%d", name, r / SOUND_STEP);
+ if (!preclaim_oss) {
+ /*
+ * Something else might have grabbed the minor. If
+ * first free slot is requested, rescan with @low set
+ * to the next unit; otherwise, -EBUSY.
+ */
+ r = __register_chrdev(SOUND_MAJOR, s->unit_minor, 1, s->name,
+ &soundcore_fops);
+ if (r < 0) {
+ spin_lock(&sound_loader_lock);
+ __sound_remove_unit(list, s->unit_minor);
+ if (index < 0) {
+ low = s->unit_minor + SOUND_STEP;
+ goto retry;
+ }
+ spin_unlock(&sound_loader_lock);
+ return -EBUSY;
+ }
+ }
+
device_create(sound_class, dev, MKDEV(SOUND_MAJOR, s->unit_minor),
NULL, s->name+6);
- return r;
+ return s->unit_minor;
- fail:
+fail:
kfree(s);
return r;
}
p = __sound_remove_unit(list, unit);
spin_unlock(&sound_loader_lock);
if (p) {
+ if (!preclaim_oss)
+ __unregister_chrdev(SOUND_MAJOR, p->unit_minor, 1,
+ p->name);
device_destroy(sound_class, MKDEV(SOUND_MAJOR, p->unit_minor));
kfree(p);
}
EXPORT_SYMBOL(unregister_sound_dsp);
-/*
- * Now our file operations
- */
-
-static int soundcore_open(struct inode *, struct file *);
-
-static const struct file_operations soundcore_fops=
-{
- /* We must have an owner or the module locking fails */
- .owner = THIS_MODULE,
- .open = soundcore_open,
-};
-
static struct sound_unit *__look_for_unit(int chain, int unit)
{
struct sound_unit *s;
s = __look_for_unit(chain, unit);
if (s)
new_fops = fops_get(s->unit_fops);
- if (!new_fops) {
+ if (preclaim_oss && !new_fops) {
spin_unlock(&sound_loader_lock);
+
/*
* Please, don't change this order or code.
* For ALSA slot means soundcard and OSS emulation code
*/
request_module("sound-slot-%i", unit>>4);
request_module("sound-service-%i-%i", unit>>4, chain);
+
+ /*
+ * sound-slot/service-* module aliases are scheduled
+ * for removal in favor of the standard char-major-*
+ * module aliases. For the time being, generate both
+ * the legacy and standard module aliases to ease
+ * transition.
+ */
+ if (request_module("char-major-%d-%d", SOUND_MAJOR, unit) > 0)
+ request_module("char-major-%d", SOUND_MAJOR);
+
spin_lock(&sound_loader_lock);
s = __look_for_unit(chain, unit);
if (s)
static int __init init_oss_soundcore(void)
{
- if (register_chrdev(SOUND_MAJOR, "sound", &soundcore_fops)==-1) {
+ if (preclaim_oss &&
+ register_chrdev(SOUND_MAJOR, "sound", &soundcore_fops) == -1) {
printk(KERN_ERR "soundcore: sound device already in use.\n");
return -EBUSY;
}
* Native Instruments Kore Controller
* Native Instruments Kore Controller 2
* Native Instruments Audio Kontrol 1
+ * Native Instruments Audio 2 DJ
* Native Instruments Audio 4 DJ
* Native Instruments Audio 8 DJ
* Native Instruments Guitar Rig Session I/O
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_GUITARRIGMOBILE):
dev->samplerates |= SNDRV_PCM_RATE_192000;
/* fall thru */
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO2DJ):
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ):
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ):
dev->samplerates |= SNDRV_PCM_RATE_88200;
#include "input.h"
MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
-MODULE_DESCRIPTION("caiaq USB audio, version 1.3.18");
+MODULE_DESCRIPTION("caiaq USB audio, version 1.3.19");
MODULE_LICENSE("GPL");
MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2},"
"{Native Instruments, RigKontrol3},"
"{Native Instruments, Kore Controller},"
"{Native Instruments, Kore Controller 2},"
"{Native Instruments, Audio Kontrol 1},"
+ "{Native Instruments, Audio 2 DJ},"
"{Native Instruments, Audio 4 DJ},"
"{Native Instruments, Audio 8 DJ},"
"{Native Instruments, Session I/O},"
.idVendor = USB_VID_NATIVEINSTRUMENTS,
.idProduct = USB_PID_AUDIO4DJ
},
+ {
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = USB_VID_NATIVEINSTRUMENTS,
+ .idProduct = USB_PID_AUDIO2DJ
+ },
{ /* terminator */ }
};
#define USB_PID_KORECONTROLLER 0x4711
#define USB_PID_KORECONTROLLER2 0x4712
#define USB_PID_AK1 0x0815
+#define USB_PID_AUDIO2DJ 0x041c
#define USB_PID_AUDIO4DJ 0x0839
#define USB_PID_AUDIO8DJ 0x1978
#define USB_PID_SESSIONIO 0x1915
} else
urb_packs = 1;
urb_packs *= packs_per_ms;
+ if (subs->syncpipe)
+ urb_packs = min(urb_packs, 1U << subs->syncinterval);
/* decide how many packets to be used */
if (is_playback) {
fp = list_entry(p, struct audioformat, list);
snd_iprintf(buffer, " Interface %d\n", fp->iface);
snd_iprintf(buffer, " Altset %d\n", fp->altsetting);
- snd_iprintf(buffer, " Format: %#x (%d bits)\n",
- fp->format, snd_pcm_format_width(fp->format));
+ snd_iprintf(buffer, " Format: %s\n",
+ snd_pcm_format_name(fp->format));
snd_iprintf(buffer, " Channels: %d\n", fp->channels);
snd_iprintf(buffer, " Endpoint: %d %s (%s)\n",
fp->endpoint & USB_ENDPOINT_NUMBER_MASK,
struct usb_interface_descriptor *altsd;
int i, altno, err, stream;
int format;
- struct audioformat *fp;
+ struct audioformat *fp = NULL;
unsigned char *fmt, *csep;
int num;
continue;
}
+ /*
+ * Blue Microphones workaround: The last altsetting is identical
+ * with the previous one, except for a larger packet size, but
+ * is actually a mislabeled two-channel setting; ignore it.
+ */
+ if (fmt[4] == 1 && fmt[5] == 2 && altno == 2 && num == 3 &&
+ fp && fp->altsetting == 1 && fp->channels == 1 &&
+ fp->format == SNDRV_PCM_FORMAT_S16_LE &&
+ le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize) ==
+ fp->maxpacksize * 2)
+ continue;
+
csep = snd_usb_find_desc(alts->endpoint[0].extra, alts->endpoint[0].extralen, NULL, USB_DT_CS_ENDPOINT);
/* Creamware Noah has this descriptor after the 2nd endpoint */
if (!csep && altsd->bNumEndpoints >= 2)
#include <linux/slab.h>
#include <linux/timer.h>
#include <linux/usb.h>
+#include <linux/wait.h>
#include <sound/core.h>
#include <sound/rawmidi.h>
#include <sound/asequencer.h>
*/
#define ERROR_DELAY_JIFFIES (HZ / 10)
+#define OUTPUT_URBS 7
+#define INPUT_URBS 7
+
MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>");
MODULE_DESCRIPTION("USB Audio/MIDI helper module");
struct usb_protocol_ops {
void (*input)(struct snd_usb_midi_in_endpoint*, uint8_t*, int);
- void (*output)(struct snd_usb_midi_out_endpoint*);
+ void (*output)(struct snd_usb_midi_out_endpoint *ep, struct urb *urb);
void (*output_packet)(struct urb*, uint8_t, uint8_t, uint8_t, uint8_t);
void (*init_out_endpoint)(struct snd_usb_midi_out_endpoint*);
void (*finish_out_endpoint)(struct snd_usb_midi_out_endpoint*);
struct snd_usb_midi_out_endpoint {
struct snd_usb_midi* umidi;
- struct urb* urb;
- int urb_active;
+ struct out_urb_context {
+ struct urb *urb;
+ struct snd_usb_midi_out_endpoint *ep;
+ } urbs[OUTPUT_URBS];
+ unsigned int active_urbs;
+ unsigned int drain_urbs;
int max_transfer; /* size of urb buffer */
struct tasklet_struct tasklet;
-
+ unsigned int next_urb;
spinlock_t buffer_lock;
struct usbmidi_out_port {
uint8_t data[2];
} ports[0x10];
int current_port;
+
+ wait_queue_head_t drain_wait;
};
struct snd_usb_midi_in_endpoint {
struct snd_usb_midi* umidi;
- struct urb* urb;
+ struct urb* urbs[INPUT_URBS];
struct usbmidi_in_port {
struct snd_rawmidi_substream *substream;
u8 running_status_length;
static void snd_usbmidi_out_urb_complete(struct urb* urb)
{
- struct snd_usb_midi_out_endpoint* ep = urb->context;
+ struct out_urb_context *context = urb->context;
+ struct snd_usb_midi_out_endpoint* ep = context->ep;
+ unsigned int urb_index;
spin_lock(&ep->buffer_lock);
- ep->urb_active = 0;
+ urb_index = context - ep->urbs;
+ ep->active_urbs &= ~(1 << urb_index);
+ if (unlikely(ep->drain_urbs)) {
+ ep->drain_urbs &= ~(1 << urb_index);
+ wake_up(&ep->drain_wait);
+ }
spin_unlock(&ep->buffer_lock);
if (urb->status < 0) {
int err = snd_usbmidi_urb_error(urb->status);
*/
static void snd_usbmidi_do_output(struct snd_usb_midi_out_endpoint* ep)
{
- struct urb* urb = ep->urb;
+ unsigned int urb_index;
+ struct urb* urb;
unsigned long flags;
spin_lock_irqsave(&ep->buffer_lock, flags);
- if (ep->urb_active || ep->umidi->chip->shutdown) {
+ if (ep->umidi->chip->shutdown) {
spin_unlock_irqrestore(&ep->buffer_lock, flags);
return;
}
- urb->transfer_buffer_length = 0;
- ep->umidi->usb_protocol_ops->output(ep);
+ urb_index = ep->next_urb;
+ for (;;) {
+ if (!(ep->active_urbs & (1 << urb_index))) {
+ urb = ep->urbs[urb_index].urb;
+ urb->transfer_buffer_length = 0;
+ ep->umidi->usb_protocol_ops->output(ep, urb);
+ if (urb->transfer_buffer_length == 0)
+ break;
- if (urb->transfer_buffer_length > 0) {
- dump_urb("sending", urb->transfer_buffer,
- urb->transfer_buffer_length);
- urb->dev = ep->umidi->chip->dev;
- ep->urb_active = snd_usbmidi_submit_urb(urb, GFP_ATOMIC) >= 0;
+ dump_urb("sending", urb->transfer_buffer,
+ urb->transfer_buffer_length);
+ urb->dev = ep->umidi->chip->dev;
+ if (snd_usbmidi_submit_urb(urb, GFP_ATOMIC) < 0)
+ break;
+ ep->active_urbs |= 1 << urb_index;
+ }
+ if (++urb_index >= OUTPUT_URBS)
+ urb_index = 0;
+ if (urb_index == ep->next_urb)
+ break;
}
+ ep->next_urb = urb_index;
spin_unlock_irqrestore(&ep->buffer_lock, flags);
}
static void snd_usbmidi_error_timer(unsigned long data)
{
struct snd_usb_midi *umidi = (struct snd_usb_midi *)data;
- int i;
+ unsigned int i, j;
spin_lock(&umidi->disc_lock);
if (umidi->disconnected) {
struct snd_usb_midi_in_endpoint *in = umidi->endpoints[i].in;
if (in && in->error_resubmit) {
in->error_resubmit = 0;
- in->urb->dev = umidi->chip->dev;
- snd_usbmidi_submit_urb(in->urb, GFP_ATOMIC);
+ for (j = 0; j < INPUT_URBS; ++j) {
+ in->urbs[j]->dev = umidi->chip->dev;
+ snd_usbmidi_submit_urb(in->urbs[j], GFP_ATOMIC);
+ }
}
if (umidi->endpoints[i].out)
snd_usbmidi_do_output(umidi->endpoints[i].out);
static int send_bulk_static_data(struct snd_usb_midi_out_endpoint* ep,
const void *data, int len)
{
- int err;
+ int err = 0;
void *buf = kmemdup(data, len, GFP_KERNEL);
if (!buf)
return -ENOMEM;
dump_urb("sending", buf, len);
- err = usb_bulk_msg(ep->umidi->chip->dev, ep->urb->pipe, buf, len,
- NULL, 250);
+ if (ep->urbs[0].urb)
+ err = usb_bulk_msg(ep->umidi->chip->dev, ep->urbs[0].urb->pipe,
+ buf, len, NULL, 250);
kfree(buf);
return err;
}
}
}
-static void snd_usbmidi_standard_output(struct snd_usb_midi_out_endpoint* ep)
+static void snd_usbmidi_standard_output(struct snd_usb_midi_out_endpoint* ep,
+ struct urb *urb)
{
- struct urb* urb = ep->urb;
int p;
/* FIXME: lower-numbered ports can starve higher-numbered ports */
snd_usbmidi_input_data(ep, 0, &buffer[2], buffer[0] - 1);
}
-static void snd_usbmidi_novation_output(struct snd_usb_midi_out_endpoint* ep)
+static void snd_usbmidi_novation_output(struct snd_usb_midi_out_endpoint* ep,
+ struct urb *urb)
{
uint8_t* transfer_buffer;
int count;
if (!ep->ports[0].active)
return;
- transfer_buffer = ep->urb->transfer_buffer;
+ transfer_buffer = urb->transfer_buffer;
count = snd_rawmidi_transmit(ep->ports[0].substream,
&transfer_buffer[2],
ep->max_transfer - 2);
}
transfer_buffer[0] = 0;
transfer_buffer[1] = count;
- ep->urb->transfer_buffer_length = 2 + count;
+ urb->transfer_buffer_length = 2 + count;
}
static struct usb_protocol_ops snd_usbmidi_novation_ops = {
snd_usbmidi_input_data(ep, 0, buffer, buffer_length);
}
-static void snd_usbmidi_raw_output(struct snd_usb_midi_out_endpoint* ep)
+static void snd_usbmidi_raw_output(struct snd_usb_midi_out_endpoint* ep,
+ struct urb *urb)
{
int count;
if (!ep->ports[0].active)
return;
count = snd_rawmidi_transmit(ep->ports[0].substream,
- ep->urb->transfer_buffer,
+ urb->transfer_buffer,
ep->max_transfer);
if (count < 1) {
ep->ports[0].active = 0;
return;
}
- ep->urb->transfer_buffer_length = count;
+ urb->transfer_buffer_length = count;
}
static struct usb_protocol_ops snd_usbmidi_raw_ops = {
snd_usbmidi_input_data(ep, 0, buffer, buffer_length);
}
-static void snd_usbmidi_us122l_output(struct snd_usb_midi_out_endpoint *ep)
+static void snd_usbmidi_us122l_output(struct snd_usb_midi_out_endpoint *ep,
+ struct urb *urb)
{
int count;
if (!ep->ports[0].active)
return;
- count = ep->urb->dev->speed == USB_SPEED_HIGH ? 1 : 2;
+ count = snd_usb_get_speed(ep->umidi->chip->dev) == USB_SPEED_HIGH
+ ? 1 : 2;
count = snd_rawmidi_transmit(ep->ports[0].substream,
- ep->urb->transfer_buffer,
+ urb->transfer_buffer,
count);
if (count < 1) {
ep->ports[0].active = 0;
return;
}
- memset(ep->urb->transfer_buffer + count, 0xFD, 9 - count);
- ep->urb->transfer_buffer_length = count;
+ memset(urb->transfer_buffer + count, 0xFD, 9 - count);
+ urb->transfer_buffer_length = count;
}
static struct usb_protocol_ops snd_usbmidi_122l_ops = {
}
}
-static void snd_usbmidi_emagic_output(struct snd_usb_midi_out_endpoint* ep)
+static void snd_usbmidi_emagic_output(struct snd_usb_midi_out_endpoint* ep,
+ struct urb *urb)
{
int port0 = ep->current_port;
- uint8_t* buf = ep->urb->transfer_buffer;
+ uint8_t* buf = urb->transfer_buffer;
int buf_free = ep->max_transfer;
int length, i;
*buf = 0xff;
--buf_free;
}
- ep->urb->transfer_buffer_length = ep->max_transfer - buf_free;
+ urb->transfer_buffer_length = ep->max_transfer - buf_free;
}
static struct usb_protocol_ops snd_usbmidi_emagic_ops = {
}
}
+static void snd_usbmidi_output_drain(struct snd_rawmidi_substream *substream)
+{
+ struct usbmidi_out_port* port = substream->runtime->private_data;
+ struct snd_usb_midi_out_endpoint *ep = port->ep;
+ unsigned int drain_urbs;
+ DEFINE_WAIT(wait);
+ long timeout = msecs_to_jiffies(50);
+
+ /*
+ * The substream buffer is empty, but some data might still be in the
+ * currently active URBs, so we have to wait for those to complete.
+ */
+ spin_lock_irq(&ep->buffer_lock);
+ drain_urbs = ep->active_urbs;
+ if (drain_urbs) {
+ ep->drain_urbs |= drain_urbs;
+ do {
+ prepare_to_wait(&ep->drain_wait, &wait,
+ TASK_UNINTERRUPTIBLE);
+ spin_unlock_irq(&ep->buffer_lock);
+ timeout = schedule_timeout(timeout);
+ spin_lock_irq(&ep->buffer_lock);
+ drain_urbs &= ep->drain_urbs;
+ } while (drain_urbs && timeout);
+ finish_wait(&ep->drain_wait, &wait);
+ }
+ spin_unlock_irq(&ep->buffer_lock);
+}
+
static int snd_usbmidi_input_open(struct snd_rawmidi_substream *substream)
{
return 0;
.open = snd_usbmidi_output_open,
.close = snd_usbmidi_output_close,
.trigger = snd_usbmidi_output_trigger,
+ .drain = snd_usbmidi_output_drain,
};
static struct snd_rawmidi_ops snd_usbmidi_input_ops = {
.trigger = snd_usbmidi_input_trigger
};
+static void free_urb_and_buffer(struct snd_usb_midi *umidi, struct urb *urb,
+ unsigned int buffer_length)
+{
+ usb_buffer_free(umidi->chip->dev, buffer_length,
+ urb->transfer_buffer, urb->transfer_dma);
+ usb_free_urb(urb);
+}
+
/*
* Frees an input endpoint.
* May be called when ep hasn't been initialized completely.
*/
static void snd_usbmidi_in_endpoint_delete(struct snd_usb_midi_in_endpoint* ep)
{
- if (ep->urb) {
- usb_buffer_free(ep->umidi->chip->dev,
- ep->urb->transfer_buffer_length,
- ep->urb->transfer_buffer,
- ep->urb->transfer_dma);
- usb_free_urb(ep->urb);
- }
+ unsigned int i;
+
+ for (i = 0; i < INPUT_URBS; ++i)
+ if (ep->urbs[i])
+ free_urb_and_buffer(ep->umidi, ep->urbs[i],
+ ep->urbs[i]->transfer_buffer_length);
kfree(ep);
}
void* buffer;
unsigned int pipe;
int length;
+ unsigned int i;
rep->in = NULL;
ep = kzalloc(sizeof(*ep), GFP_KERNEL);
return -ENOMEM;
ep->umidi = umidi;
- ep->urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!ep->urb) {
- snd_usbmidi_in_endpoint_delete(ep);
- return -ENOMEM;
+ for (i = 0; i < INPUT_URBS; ++i) {
+ ep->urbs[i] = usb_alloc_urb(0, GFP_KERNEL);
+ if (!ep->urbs[i]) {
+ snd_usbmidi_in_endpoint_delete(ep);
+ return -ENOMEM;
+ }
}
if (ep_info->in_interval)
pipe = usb_rcvintpipe(umidi->chip->dev, ep_info->in_ep);
else
pipe = usb_rcvbulkpipe(umidi->chip->dev, ep_info->in_ep);
length = usb_maxpacket(umidi->chip->dev, pipe, 0);
- buffer = usb_buffer_alloc(umidi->chip->dev, length, GFP_KERNEL,
- &ep->urb->transfer_dma);
- if (!buffer) {
- snd_usbmidi_in_endpoint_delete(ep);
- return -ENOMEM;
+ for (i = 0; i < INPUT_URBS; ++i) {
+ buffer = usb_buffer_alloc(umidi->chip->dev, length, GFP_KERNEL,
+ &ep->urbs[i]->transfer_dma);
+ if (!buffer) {
+ snd_usbmidi_in_endpoint_delete(ep);
+ return -ENOMEM;
+ }
+ if (ep_info->in_interval)
+ usb_fill_int_urb(ep->urbs[i], umidi->chip->dev,
+ pipe, buffer, length,
+ snd_usbmidi_in_urb_complete,
+ ep, ep_info->in_interval);
+ else
+ usb_fill_bulk_urb(ep->urbs[i], umidi->chip->dev,
+ pipe, buffer, length,
+ snd_usbmidi_in_urb_complete, ep);
+ ep->urbs[i]->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
}
- if (ep_info->in_interval)
- usb_fill_int_urb(ep->urb, umidi->chip->dev, pipe, buffer,
- length, snd_usbmidi_in_urb_complete, ep,
- ep_info->in_interval);
- else
- usb_fill_bulk_urb(ep->urb, umidi->chip->dev, pipe, buffer,
- length, snd_usbmidi_in_urb_complete, ep);
- ep->urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
rep->in = ep;
return 0;
*/
static void snd_usbmidi_out_endpoint_delete(struct snd_usb_midi_out_endpoint* ep)
{
- if (ep->urb) {
- usb_buffer_free(ep->umidi->chip->dev, ep->max_transfer,
- ep->urb->transfer_buffer,
- ep->urb->transfer_dma);
- usb_free_urb(ep->urb);
- }
+ unsigned int i;
+
+ for (i = 0; i < OUTPUT_URBS; ++i)
+ if (ep->urbs[i].urb)
+ free_urb_and_buffer(ep->umidi, ep->urbs[i].urb,
+ ep->max_transfer);
kfree(ep);
}
struct snd_usb_midi_endpoint* rep)
{
struct snd_usb_midi_out_endpoint* ep;
- int i;
+ unsigned int i;
unsigned int pipe;
void* buffer;
return -ENOMEM;
ep->umidi = umidi;
- ep->urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!ep->urb) {
- snd_usbmidi_out_endpoint_delete(ep);
- return -ENOMEM;
+ for (i = 0; i < OUTPUT_URBS; ++i) {
+ ep->urbs[i].urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!ep->urbs[i].urb) {
+ snd_usbmidi_out_endpoint_delete(ep);
+ return -ENOMEM;
+ }
+ ep->urbs[i].ep = ep;
}
if (ep_info->out_interval)
pipe = usb_sndintpipe(umidi->chip->dev, ep_info->out_ep);
else
pipe = usb_sndbulkpipe(umidi->chip->dev, ep_info->out_ep);
if (umidi->chip->usb_id == USB_ID(0x0a92, 0x1020)) /* ESI M4U */
- /* FIXME: we need more URBs to get reasonable bandwidth here: */
ep->max_transfer = 4;
else
ep->max_transfer = usb_maxpacket(umidi->chip->dev, pipe, 1);
- buffer = usb_buffer_alloc(umidi->chip->dev, ep->max_transfer,
- GFP_KERNEL, &ep->urb->transfer_dma);
- if (!buffer) {
- snd_usbmidi_out_endpoint_delete(ep);
- return -ENOMEM;
+ for (i = 0; i < OUTPUT_URBS; ++i) {
+ buffer = usb_buffer_alloc(umidi->chip->dev,
+ ep->max_transfer, GFP_KERNEL,
+ &ep->urbs[i].urb->transfer_dma);
+ if (!buffer) {
+ snd_usbmidi_out_endpoint_delete(ep);
+ return -ENOMEM;
+ }
+ if (ep_info->out_interval)
+ usb_fill_int_urb(ep->urbs[i].urb, umidi->chip->dev,
+ pipe, buffer, ep->max_transfer,
+ snd_usbmidi_out_urb_complete,
+ &ep->urbs[i], ep_info->out_interval);
+ else
+ usb_fill_bulk_urb(ep->urbs[i].urb, umidi->chip->dev,
+ pipe, buffer, ep->max_transfer,
+ snd_usbmidi_out_urb_complete,
+ &ep->urbs[i]);
+ ep->urbs[i].urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
}
- if (ep_info->out_interval)
- usb_fill_int_urb(ep->urb, umidi->chip->dev, pipe, buffer,
- ep->max_transfer, snd_usbmidi_out_urb_complete,
- ep, ep_info->out_interval);
- else
- usb_fill_bulk_urb(ep->urb, umidi->chip->dev,
- pipe, buffer, ep->max_transfer,
- snd_usbmidi_out_urb_complete, ep);
- ep->urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
spin_lock_init(&ep->buffer_lock);
tasklet_init(&ep->tasklet, snd_usbmidi_out_tasklet, (unsigned long)ep);
+ init_waitqueue_head(&ep->drain_wait);
for (i = 0; i < 0x10; ++i)
if (ep_info->out_cables & (1 << i)) {
void snd_usbmidi_disconnect(struct list_head* p)
{
struct snd_usb_midi* umidi;
- int i;
+ unsigned int i, j;
umidi = list_entry(p, struct snd_usb_midi, list);
/*
struct snd_usb_midi_endpoint* ep = &umidi->endpoints[i];
if (ep->out)
tasklet_kill(&ep->out->tasklet);
- if (ep->out && ep->out->urb) {
- usb_kill_urb(ep->out->urb);
+ if (ep->out) {
+ for (j = 0; j < OUTPUT_URBS; ++j)
+ usb_kill_urb(ep->out->urbs[j].urb);
if (umidi->usb_protocol_ops->finish_out_endpoint)
umidi->usb_protocol_ops->finish_out_endpoint(ep->out);
}
if (ep->in)
- usb_kill_urb(ep->in->urb);
+ for (j = 0; j < INPUT_URBS; ++j)
+ usb_kill_urb(ep->in->urbs[j]);
/* free endpoints here; later call can result in Oops */
if (ep->out) {
snd_usbmidi_out_endpoint_delete(ep->out);
void snd_usbmidi_input_stop(struct list_head* p)
{
struct snd_usb_midi* umidi;
- int i;
+ unsigned int i, j;
umidi = list_entry(p, struct snd_usb_midi, list);
for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) {
struct snd_usb_midi_endpoint* ep = &umidi->endpoints[i];
if (ep->in)
- usb_kill_urb(ep->in->urb);
+ for (j = 0; j < INPUT_URBS; ++j)
+ usb_kill_urb(ep->in->urbs[j]);
}
}
static void snd_usbmidi_input_start_ep(struct snd_usb_midi_in_endpoint* ep)
{
- if (ep) {
- struct urb* urb = ep->urb;
+ unsigned int i;
+
+ if (!ep)
+ return;
+ for (i = 0; i < INPUT_URBS; ++i) {
+ struct urb* urb = ep->urbs[i];
urb->dev = ep->umidi->chip->dev;
snd_usbmidi_submit_urb(urb, GFP_KERNEL);
}
u8 rc_buffer[6];
u8 audigy2nx_leds[3];
+ u8 xonar_u1_status;
};
unsigned int size, unsigned int __user *_tlv)
{
struct usb_mixer_elem_info *cval = kcontrol->private_data;
- DECLARE_TLV_DB_SCALE(scale, 0, 0, 0);
+ DECLARE_TLV_DB_MINMAX(scale, 0, 0);
if (size < sizeof(scale))
return -ENOMEM;
* while ALSA TLV contains in 1/100 dB unit
*/
scale[2] = (convert_signed_value(cval, cval->min) * 100) / 256;
- scale[3] = (convert_signed_value(cval, cval->res) * 100) / 256;
+ scale[3] = (convert_signed_value(cval, cval->max) * 100) / 256;
+ if (scale[3] <= scale[2]) {
+ /* something is wrong; assume it's either from/to 0dB */
+ if (scale[2] < 0)
+ scale[3] = 0;
+ else if (scale[2] > 0)
+ scale[2] = 0;
+ else /* totally crap, return an error */
+ return -EINVAL;
+ }
if (copy_to_user(_tlv, scale, sizeof(scale)))
return -EFAULT;
return 0;
break;
}
- /* quirk for UDA1321/N101 */
- /* note that detection between firmware 2.1.1.7 (N101) and later 2.1.1.21 */
- /* is not very clear from datasheets */
- /* I hope that the min value is -15360 for newer firmware --jk */
+ /* volume control quirks */
switch (state->chip->usb_id) {
case USB_ID(0x0471, 0x0101):
case USB_ID(0x0471, 0x0104):
case USB_ID(0x0471, 0x0105):
case USB_ID(0x0672, 0x1041):
+ /* quirk for UDA1321/N101.
+ * note that detection between firmware 2.1.1.7 (N101)
+ * and later 2.1.1.21 is not very clear from datasheets.
+ * I hope that the min value is -15360 for newer firmware --jk
+ */
if (!strcmp(kctl->id.name, "PCM Playback Volume") &&
cval->min == -15616) {
- snd_printk(KERN_INFO "using volume control quirk for the UDA1321/N101 chip\n");
+ snd_printk(KERN_INFO
+ "set volume quirk for UDA1321/N101 chip\n");
cval->max = -256;
}
+ break;
+
+ case USB_ID(0x046d, 0x09a4):
+ if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
+ snd_printk(KERN_INFO
+ "set volume quirk for QuickCam E3500\n");
+ cval->min = 6080;
+ cval->max = 8768;
+ cval->res = 192;
+ }
+ break;
+
}
snd_printdd(KERN_INFO "[%d] FU [%s] ch = %d, val = %d/%d/%d\n",
}
}
+static int snd_xonar_u1_switch_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_interface *mixer = snd_kcontrol_chip(kcontrol);
+
+ ucontrol->value.integer.value[0] = !!(mixer->xonar_u1_status & 0x02);
+ return 0;
+}
+
+static int snd_xonar_u1_switch_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_interface *mixer = snd_kcontrol_chip(kcontrol);
+ u8 old_status, new_status;
+ int err, changed;
+
+ old_status = mixer->xonar_u1_status;
+ if (ucontrol->value.integer.value[0])
+ new_status = old_status | 0x02;
+ else
+ new_status = old_status & ~0x02;
+ changed = new_status != old_status;
+ err = snd_usb_ctl_msg(mixer->chip->dev,
+ usb_sndctrlpipe(mixer->chip->dev, 0), 0x08,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
+ 50, 0, &new_status, 1, 100);
+ if (err < 0)
+ return err;
+ mixer->xonar_u1_status = new_status;
+ return changed;
+}
+
+static struct snd_kcontrol_new snd_xonar_u1_output_switch = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Digital Playback Switch",
+ .info = snd_ctl_boolean_mono_info,
+ .get = snd_xonar_u1_switch_get,
+ .put = snd_xonar_u1_switch_put,
+};
+
+static int snd_xonar_u1_controls_create(struct usb_mixer_interface *mixer)
+{
+ int err;
+
+ err = snd_ctl_add(mixer->chip->card,
+ snd_ctl_new1(&snd_xonar_u1_output_switch, mixer));
+ if (err < 0)
+ return err;
+ mixer->xonar_u1_status = 0x05;
+ return 0;
+}
+
int snd_usb_create_mixer(struct snd_usb_audio *chip, int ctrlif,
int ignore_error)
{
snd_audigy2nx_proc_read);
}
+ if (mixer->chip->usb_id == USB_ID(0x0b05, 0x1739) ||
+ mixer->chip->usb_id == USB_ID(0x0b05, 0x1743)) {
+ err = snd_xonar_u1_controls_create(mixer);
+ if (err < 0)
+ goto _error;
+ }
+
err = snd_device_new(chip->card, SNDRV_DEV_LOWLEVEL, mixer, &dev_ops);
if (err < 0)
goto _error;
# DESTDIR=
ASCIIDOC=asciidoc
-ASCIIDOC_EXTRA =
+ASCIIDOC_EXTRA = --unsafe
MANPAGE_XSL = manpage-normal.xsl
XMLTO_EXTRA =
INSTALL?=install
--- /dev/null
+
+ ------------------------------
+ ****** perf by examples ******
+ ------------------------------
+
+[ From an e-mail by Ingo Molnar, http://lkml.org/lkml/2009/8/4/346 ]
+
+
+First, discovery/enumeration of available counters can be done via
+'perf list':
+
+titan:~> perf list
+ [...]
+ kmem:kmalloc [Tracepoint event]
+ kmem:kmem_cache_alloc [Tracepoint event]
+ kmem:kmalloc_node [Tracepoint event]
+ kmem:kmem_cache_alloc_node [Tracepoint event]
+ kmem:kfree [Tracepoint event]
+ kmem:kmem_cache_free [Tracepoint event]
+ kmem:mm_page_free_direct [Tracepoint event]
+ kmem:mm_pagevec_free [Tracepoint event]
+ kmem:mm_page_alloc [Tracepoint event]
+ kmem:mm_page_alloc_zone_locked [Tracepoint event]
+ kmem:mm_page_pcpu_drain [Tracepoint event]
+ kmem:mm_page_alloc_extfrag [Tracepoint event]
+
+Then any (or all) of the above event sources can be activated and
+measured. For example the page alloc/free properties of a 'hackbench
+run' are:
+
+ titan:~> perf stat -e kmem:mm_page_pcpu_drain -e kmem:mm_page_alloc
+ -e kmem:mm_pagevec_free -e kmem:mm_page_free_direct ./hackbench 10
+ Time: 0.575
+
+ Performance counter stats for './hackbench 10':
+
+ 13857 kmem:mm_page_pcpu_drain
+ 27576 kmem:mm_page_alloc
+ 6025 kmem:mm_pagevec_free
+ 20934 kmem:mm_page_free_direct
+
+ 0.613972165 seconds time elapsed
+
+You can observe the statistical properties as well, by using the
+'repeat the workload N times' feature of perf stat:
+
+ titan:~> perf stat --repeat 5 -e kmem:mm_page_pcpu_drain -e
+ kmem:mm_page_alloc -e kmem:mm_pagevec_free -e
+ kmem:mm_page_free_direct ./hackbench 10
+ Time: 0.627
+ Time: 0.644
+ Time: 0.564
+ Time: 0.559
+ Time: 0.626
+
+ Performance counter stats for './hackbench 10' (5 runs):
+
+ 12920 kmem:mm_page_pcpu_drain ( +- 3.359% )
+ 25035 kmem:mm_page_alloc ( +- 3.783% )
+ 6104 kmem:mm_pagevec_free ( +- 0.934% )
+ 18376 kmem:mm_page_free_direct ( +- 4.941% )
+
+ 0.643954516 seconds time elapsed ( +- 2.363% )
+
+Furthermore, these tracepoints can be used to sample the workload as
+well. For example the page allocations done by a 'git gc' can be
+captured the following way:
+
+ titan:~/git> perf record -f -e kmem:mm_page_alloc -c 1 ./git gc
+ Counting objects: 1148, done.
+ Delta compression using up to 2 threads.
+ Compressing objects: 100% (450/450), done.
+ Writing objects: 100% (1148/1148), done.
+ Total 1148 (delta 690), reused 1148 (delta 690)
+ [ perf record: Captured and wrote 0.267 MB perf.data (~11679 samples) ]
+
+To check which functions generated page allocations:
+
+ titan:~/git> perf report
+ # Samples: 10646
+ #
+ # Overhead Command Shared Object
+ # ........ ............... ..........................
+ #
+ 23.57% git-repack /lib64/libc-2.5.so
+ 21.81% git /lib64/libc-2.5.so
+ 14.59% git ./git
+ 11.79% git-repack ./git
+ 7.12% git /lib64/ld-2.5.so
+ 3.16% git-repack /lib64/libpthread-2.5.so
+ 2.09% git-repack /bin/bash
+ 1.97% rm /lib64/libc-2.5.so
+ 1.39% mv /lib64/ld-2.5.so
+ 1.37% mv /lib64/libc-2.5.so
+ 1.12% git-repack /lib64/ld-2.5.so
+ 0.95% rm /lib64/ld-2.5.so
+ 0.90% git-update-serv /lib64/libc-2.5.so
+ 0.73% git-update-serv /lib64/ld-2.5.so
+ 0.68% perf /lib64/libpthread-2.5.so
+ 0.64% git-repack /usr/lib64/libz.so.1.2.3
+
+Or to see it on a more finegrained level:
+
+titan:~/git> perf report --sort comm,dso,symbol
+# Samples: 10646
+#
+# Overhead Command Shared Object Symbol
+# ........ ............... .......................... ......
+#
+ 9.35% git-repack ./git [.] insert_obj_hash
+ 9.12% git ./git [.] insert_obj_hash
+ 7.31% git /lib64/libc-2.5.so [.] memcpy
+ 6.34% git-repack /lib64/libc-2.5.so [.] _int_malloc
+ 6.24% git-repack /lib64/libc-2.5.so [.] memcpy
+ 5.82% git-repack /lib64/libc-2.5.so [.] __GI___fork
+ 5.47% git /lib64/libc-2.5.so [.] _int_malloc
+ 2.99% git /lib64/libc-2.5.so [.] memset
+
+Furthermore, call-graph sampling can be done too, of page
+allocations - to see precisely what kind of page allocations there
+are:
+
+ titan:~/git> perf record -f -g -e kmem:mm_page_alloc -c 1 ./git gc
+ Counting objects: 1148, done.
+ Delta compression using up to 2 threads.
+ Compressing objects: 100% (450/450), done.
+ Writing objects: 100% (1148/1148), done.
+ Total 1148 (delta 690), reused 1148 (delta 690)
+ [ perf record: Captured and wrote 0.963 MB perf.data (~42069 samples) ]
+
+ titan:~/git> perf report -g
+ # Samples: 10686
+ #
+ # Overhead Command Shared Object
+ # ........ ............... ..........................
+ #
+ 23.25% git-repack /lib64/libc-2.5.so
+ |
+ |--50.00%-- _int_free
+ |
+ |--37.50%-- __GI___fork
+ | make_child
+ |
+ |--12.50%-- ptmalloc_unlock_all2
+ | make_child
+ |
+ --6.25%-- __GI_strcpy
+ 21.61% git /lib64/libc-2.5.so
+ |
+ |--30.00%-- __GI_read
+ | |
+ | --83.33%-- git_config_from_file
+ | git_config
+ | |
+ [...]
+
+Or you can observe the whole system's page allocations for 10
+seconds:
+
+titan:~/git> perf stat -a -e kmem:mm_page_pcpu_drain -e
+kmem:mm_page_alloc -e kmem:mm_pagevec_free -e
+kmem:mm_page_free_direct sleep 10
+
+ Performance counter stats for 'sleep 10':
+
+ 171585 kmem:mm_page_pcpu_drain
+ 322114 kmem:mm_page_alloc
+ 73623 kmem:mm_pagevec_free
+ 254115 kmem:mm_page_free_direct
+
+ 10.000591410 seconds time elapsed
+
+Or observe how fluctuating the page allocations are, via statistical
+analysis done over ten 1-second intervals:
+
+ titan:~/git> perf stat --repeat 10 -a -e kmem:mm_page_pcpu_drain -e
+ kmem:mm_page_alloc -e kmem:mm_pagevec_free -e
+ kmem:mm_page_free_direct sleep 1
+
+ Performance counter stats for 'sleep 1' (10 runs):
+
+ 17254 kmem:mm_page_pcpu_drain ( +- 3.709% )
+ 34394 kmem:mm_page_alloc ( +- 4.617% )
+ 7509 kmem:mm_pagevec_free ( +- 4.820% )
+ 25653 kmem:mm_page_free_direct ( +- 3.672% )
+
+ 1.058135029 seconds time elapsed ( +- 3.089% )
+
+Or you can annotate the recorded 'git gc' run on a per symbol basis
+and check which instructions/source-code generated page allocations:
+
+ titan:~/git> perf annotate __GI___fork
+ ------------------------------------------------
+ Percent | Source code & Disassembly of libc-2.5.so
+ ------------------------------------------------
+ :
+ :
+ : Disassembly of section .plt:
+ : Disassembly of section .text:
+ :
+ : 00000031a2e95560 <__fork>:
+ [...]
+ 0.00 : 31a2e95602: b8 38 00 00 00 mov $0x38,%eax
+ 0.00 : 31a2e95607: 0f 05 syscall
+ 83.42 : 31a2e95609: 48 3d 00 f0 ff ff cmp $0xfffffffffffff000,%rax
+ 0.00 : 31a2e9560f: 0f 87 4d 01 00 00 ja 31a2e95762 <__fork+0x202>
+ 0.00 : 31a2e95615: 85 c0 test %eax,%eax
+
+( this shows that 83.42% of __GI___fork's page allocations come from
+ the 0x38 system call it performs. )
+
+etc. etc. - a lot more is possible. I could list a dozen of
+other different usecases straight away - neither of which is
+possible via /proc/vmstat.
+
+/proc/vmstat is not in the same league really, in terms of
+expressive power of system analysis and performance
+analysis.
+
+All that the above results needed were those new tracepoints
+in include/tracing/events/kmem.h.
+
+ Ingo
+
+
Select the PMU event. Selection can be a symbolic event name
(use 'perf list' to list all events) or a raw PMU
event (eventsel+umask) in the form of rNNN where NNN is a
- hexadecimal event descriptor.
+ hexadecimal event descriptor.
-a::
- system-wide collection
+ System-wide collection.
-l::
- scale counter values
+ Scale counter values.
+
+-p::
+--pid=::
+ Record events on existing pid.
+
+-r::
+--realtime=::
+ Collect data with this RT SCHED_FIFO priority.
+-A::
+--append::
+ Append to the output file to do incremental profiling.
+
+-f::
+--force::
+ Overwrite existing data file.
+
+-c::
+--count=::
+ Event period to sample.
+
+-o::
+--output=::
+ Output file name.
+
+-i::
+--inherit::
+ Child tasks inherit counters.
+-F::
+--freq=::
+ Profile at this frequency.
+
+-m::
+--mmap-pages=::
+ Number of mmap data pages.
+
+-g::
+--call-graph::
+ Do call-graph (stack chain/backtrace) recording.
+
+-v::
+--verbose::
+ Be more verbose (show counter open errors, etc).
+
+-s::
+--stat::
+ Per thread counts.
+
+-d::
+--data::
+ Sample addresses.
+
+-n::
+--no-samples::
+ Don't sample.
SEE ALSO
--------
--dsos=::
Only consider symbols in these dsos. CSV that understands
file://filename entries.
+-n
+--show-nr-samples
+ Show the number of samples for each symbol
-C::
--comms=::
Only consider symbols in these comms. CSV that understands
Only consider these symbols. CSV that understands
file://filename entries.
+-w::
+--field-width=::
+ Force each column width to the provided list, for large terminal
+ readability.
+
+-t::
+--field-separator=::
+
+ Use a special separator character and don't pad with spaces, replacing
+ all occurances of this separator in symbol names (and other output)
+ with a '.' character, that thus it's the only non valid separator.
+
SEE ALSO
--------
linkperf:perf-stat[1]
-a::
system-wide collection
--S::
+-c::
scale counter values
EXAMPLES
NAME
----
-perf-top - Run a command and profile it
+perf-top - System profiling tool.
SYNOPSIS
--------
[verse]
-'perf top' [-e <EVENT> | --event=EVENT] [-l] [-a] <command>
+'perf top' [-e <EVENT> | --event=EVENT] [<options>]
DESCRIPTION
-----------
-This command runs a command and gathers a performance counter profile
-from it.
+This command generates and displays a performance counter profile in realtime.
OPTIONS
-------
-<command>...::
- Any command you can specify in a shell.
+-a::
+--all-cpus::
+ System-wide collection. (default)
+
+-c <count>::
+--count=<count>::
+ Event period to sample.
+
+-C <cpu>::
+--CPU=<cpu>::
+ CPU to profile.
+
+-d <seconds>::
+--delay=<seconds>::
+ Number of seconds to delay between refreshes.
--e::
---event=::
+-e <event>::
+--event=<event>::
Select the PMU event. Selection can be a symbolic event name
(use 'perf list' to list all events) or a raw PMU
event (eventsel+umask) in the form of rNNN where NNN is a
- hexadecimal event descriptor.
+ hexadecimal event descriptor.
--a::
- system-wide collection
+-E <entries>::
+--entries=<entries>::
+ Display this many functions.
+
+-f <count>::
+--count-filter=<count>::
+ Only display functions with more events than this.
+
+-F <freq>::
+--freq=<freq>::
+ Profile at this frequency.
+
+-i::
+--inherit::
+ Child tasks inherit counters, only makes sens with -p option.
+
+-k <path>::
+--vmlinux=<path>::
+ Path to vmlinux. Required for annotation functionality.
+
+-m <pages>::
+--mmap-pages=<pages>::
+ Number of mmapped data pages.
+
+-p <pid>::
+--pid=<pid>::
+ Profile events on existing pid.
+
+-r <priority>::
+--realtime=<priority>::
+ Collect data with this RT SCHED_FIFO priority.
+
+-s <symbol>::
+--sym-annotate=<symbol>::
+ Annotate this symbol. Requires -k option.
+
+-v::
+--verbose::
+ Be more verbose (show counter open errors, etc).
+
+-z::
+--zero::
+ Zero history across display updates.
+
+INTERACTIVE PROMPTING KEYS
+--------------------------
+
+[d]::
+ Display refresh delay.
+
+[e]::
+ Number of entries to display.
+
+[E]::
+ Event to display when multiple counters are active.
+
+[f]::
+ Profile display filter (>= hit count).
+
+[F]::
+ Annotation display filter (>= % of total).
+
+[s]::
+ Annotate symbol.
+
+[S]::
+ Stop annotation, return to full profile display.
+
+[w]::
+ Toggle between weighted sum and individual count[E]r profile.
+
+[z]::
+ Toggle event count zeroing across display updates.
+
+[qQ]::
+ Quit.
+
+Pressing any unmapped key displays a menu, and prompts for input.
--l::
- scale counter values
SEE ALSO
--------
uname_V := $(shell sh -c 'uname -v 2>/dev/null || echo not')
# If we're on a 64-bit kernel, use -m64
-ifneq ($(patsubst %64,%,$(uname_M)),$(uname_M))
- M64 := -m64
+ifndef NO_64BIT
+ ifneq ($(patsubst %64,%,$(uname_M)),$(uname_M))
+ M64 := -m64
+ endif
endif
# CFLAGS and LDFLAGS are for the users to override from the command line.
BUILTIN_OBJS += builtin-top.o
PERFLIBS = $(LIB_FILE)
-EXTLIBS =
#
# Platform specific tweaks
PTHREAD_LIBS =
endif
+ifneq ($(shell sh -c "(echo '\#include <libelf.h>'; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ_MMAP, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) > /dev/null 2>&1 && echo y"), y)
+ msg := $(error No libelf.h/libelf found, please install libelf-dev/elfutils-libelf-devel);
+endif
+
+ifdef NO_DEMANGLE
+ BASIC_CFLAGS += -DNO_DEMANGLE
+else
+ has_bfd := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) -lbfd > /dev/null 2>&1 && echo y")
+
+ ifeq ($(has_bfd),y)
+ EXTLIBS += -lbfd
+ else
+ has_bfd_iberty := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) -lbfd -liberty > /dev/null 2>&1 && echo y")
+ ifeq ($(has_bfd_iberty),y)
+ EXTLIBS += -lbfd -liberty
+ else
+ has_bfd_iberty_z := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) -lbfd -liberty -lz > /dev/null 2>&1 && echo y")
+ ifeq ($(has_bfd_iberty_z),y)
+ EXTLIBS += -lbfd -liberty -lz
+ else
+ has_cplus_demangle := $(shell sh -c "(echo 'extern char *cplus_demangle(const char *, int);'; echo 'int main(void) { cplus_demangle(0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) -liberty > /dev/null 2>&1 && echo y")
+ ifeq ($(has_cplus_demangle),y)
+ EXTLIBS += -liberty
+ BASIC_CFLAGS += -DHAVE_CPLUS_DEMANGLE
+ else
+ msg := $(warning No bfd.h/libbfd found, install binutils-dev[el] to gain symbol demangling)
+ BASIC_CFLAGS += -DNO_DEMANGLE
+ endif
+ endif
+ endif
+ endif
+endif
+
ifndef CC_LD_DYNPATH
ifdef NO_R_TO_GCC_LINKER
# Some gcc does not accept and pass -R to the linker to specify
static char default_sort_order[] = "comm,symbol";
static char *sort_order = default_sort_order;
+static int force;
static int input;
static int show_mask = SHOW_KERNEL | SHOW_USER | SHOW_HV;
u32 pid, ppid;
};
-struct period_event {
- struct perf_event_header header;
- u64 time;
- u64 id;
- u64 sample_period;
-};
-
typedef union event_union {
struct perf_event_header header;
struct ip_event ip;
struct mmap_event mmap;
struct comm_event comm;
struct fork_event fork;
- struct period_event period;
} event_t;
(void *)(long)(event->header.size),
event->fork.pid, event->fork.ppid);
+ /*
+ * A thread clone will have the same PID for both
+ * parent and child.
+ */
+ if (thread == parent)
+ return 0;
+
if (!thread || !parent || thread__fork(thread, parent)) {
dprintf("problem processing PERF_EVENT_FORK, skipping event.\n");
return -1;
return 0;
}
-static int
-process_period_event(event_t *event, unsigned long offset, unsigned long head)
-{
- dprintf("%p [%p]: PERF_EVENT_PERIOD: time:%Ld, id:%Ld: period:%Ld\n",
- (void *)(offset + head),
- (void *)(long)(event->header.size),
- event->period.time,
- event->period.id,
- event->period.sample_period);
-
- return 0;
-}
-
static int
process_event(event_t *event, unsigned long offset, unsigned long head)
{
case PERF_EVENT_FORK:
return process_fork_event(event, offset, head);
-
- case PERF_EVENT_PERIOD:
- return process_period_event(event, offset, head);
/*
* We dont process them right now but they are fine:
*/
exit(-1);
}
+ if (!force && (stat.st_uid != geteuid())) {
+ fprintf(stderr, "file: %s not owned by current user\n", input_name);
+ exit(-1);
+ }
+
if (!stat.st_size) {
fprintf(stderr, "zero-sized file, nothing to do!\n");
exit(0);
"input file name"),
OPT_STRING('s', "symbol", &sym_hist_filter, "symbol",
"symbol to annotate"),
+ OPT_BOOLEAN('f', "force", &force, "don't complain, do it"),
OPT_BOOLEAN('v', "verbose", &verbose,
"be more verbose (show symbol address, etc)"),
OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace,
#include "perf.h"
-#include "util/parse-options.h"
#include "util/parse-events.h"
+#include "util/cache.h"
int cmd_list(int argc __used, const char **argv __used, const char *prefix __used)
{
+ setup_pager();
print_events();
return 0;
}
static const char *output_name = "perf.data";
static int group = 0;
static unsigned int realtime_prio = 0;
+static int raw_samples = 0;
static int system_wide = 0;
+static int profile_cpu = -1;
static pid_t target_pid = -1;
static int inherit = 1;
static int force = 0;
static int verbose = 0;
static int inherit_stat = 0;
static int no_samples = 0;
+static int sample_address = 0;
static long samples;
static struct timeval last_read;
kill(getpid(), signr);
}
-static void pid_synthesize_comm_event(pid_t pid, int full)
+static pid_t pid_synthesize_comm_event(pid_t pid, int full)
{
struct comm_event comm_ev;
char filename[PATH_MAX];
char bf[BUFSIZ];
- int fd;
- size_t size;
- char *field, *sep;
+ FILE *fp;
+ size_t size = 0;
DIR *tasks;
struct dirent dirent, *next;
+ pid_t tgid = 0;
- snprintf(filename, sizeof(filename), "/proc/%d/stat", pid);
+ snprintf(filename, sizeof(filename), "/proc/%d/status", pid);
- fd = open(filename, O_RDONLY);
- if (fd < 0) {
+ fp = fopen(filename, "r");
+ if (fp == NULL) {
/*
* We raced with a task exiting - just return:
*/
if (verbose)
fprintf(stderr, "couldn't open %s\n", filename);
- return;
- }
- if (read(fd, bf, sizeof(bf)) < 0) {
- fprintf(stderr, "couldn't read %s\n", filename);
- exit(EXIT_FAILURE);
+ return 0;
}
- close(fd);
- /* 9027 (cat) R 6747 9027 6747 34816 9027 ... */
memset(&comm_ev, 0, sizeof(comm_ev));
- field = strchr(bf, '(');
- if (field == NULL)
- goto out_failure;
- sep = strchr(++field, ')');
- if (sep == NULL)
- goto out_failure;
- size = sep - field;
- memcpy(comm_ev.comm, field, size++);
-
- comm_ev.pid = pid;
+ while (!comm_ev.comm[0] || !comm_ev.pid) {
+ if (fgets(bf, sizeof(bf), fp) == NULL)
+ goto out_failure;
+
+ if (memcmp(bf, "Name:", 5) == 0) {
+ char *name = bf + 5;
+ while (*name && isspace(*name))
+ ++name;
+ size = strlen(name) - 1;
+ memcpy(comm_ev.comm, name, size++);
+ } else if (memcmp(bf, "Tgid:", 5) == 0) {
+ char *tgids = bf + 5;
+ while (*tgids && isspace(*tgids))
+ ++tgids;
+ tgid = comm_ev.pid = atoi(tgids);
+ }
+ }
+
comm_ev.header.type = PERF_EVENT_COMM;
size = ALIGN(size, sizeof(u64));
comm_ev.header.size = sizeof(comm_ev) - (sizeof(comm_ev.comm) - size);
comm_ev.tid = pid;
write_output(&comm_ev, comm_ev.header.size);
- return;
+ goto out_fclose;
}
snprintf(filename, sizeof(filename), "/proc/%d/task", pid);
write_output(&comm_ev, comm_ev.header.size);
}
closedir(tasks);
- return;
+
+out_fclose:
+ fclose(fp);
+ return tgid;
out_failure:
fprintf(stderr, "couldn't get COMM and pgid, malformed %s\n",
exit(EXIT_FAILURE);
}
-static void pid_synthesize_mmap_samples(pid_t pid)
+static void pid_synthesize_mmap_samples(pid_t pid, pid_t tgid)
{
char filename[PATH_MAX];
FILE *fp;
if (*pbf == 'x') { /* vm_exec */
char *execname = strchr(bf, '/');
+ /* Catch VDSO */
+ if (execname == NULL)
+ execname = strstr(bf, "[vdso]");
+
if (execname == NULL)
continue;
mmap_ev.len -= mmap_ev.start;
mmap_ev.header.size = (sizeof(mmap_ev) -
(sizeof(mmap_ev.filename) - size));
- mmap_ev.pid = pid;
+ mmap_ev.pid = tgid;
mmap_ev.tid = pid;
write_output(&mmap_ev, mmap_ev.header.size);
while (!readdir_r(proc, &dirent, &next) && next) {
char *end;
- pid_t pid;
+ pid_t pid, tgid;
pid = strtol(dirent.d_name, &end, 10);
if (*end) /* only interested in proper numerical dirents */
continue;
- pid_synthesize_comm_event(pid, 1);
- pid_synthesize_mmap_samples(pid);
+ tgid = pid_synthesize_comm_event(pid, 1);
+ pid_synthesize_mmap_samples(pid, tgid);
}
closedir(proc);
PERF_FORMAT_TOTAL_TIME_RUNNING |
PERF_FORMAT_ID;
- attr->sample_type = PERF_SAMPLE_IP | PERF_SAMPLE_TID;
+ attr->sample_type |= PERF_SAMPLE_IP | PERF_SAMPLE_TID;
if (freq) {
attr->sample_type |= PERF_SAMPLE_PERIOD;
if (inherit_stat)
attr->inherit_stat = 1;
+ if (sample_address)
+ attr->sample_type |= PERF_SAMPLE_ADDR;
+
if (call_graph)
attr->sample_type |= PERF_SAMPLE_CALLCHAIN;
+ if (raw_samples)
+ attr->sample_type |= PERF_SAMPLE_RAW;
+
attr->mmap = track;
attr->comm = track;
attr->inherit = (cpu < 0) && inherit;
if (err == EPERM)
die("Permission error - are you root?\n");
+ else if (err == ENODEV && profile_cpu != -1)
+ die("No such device - did you specify an out-of-range profile CPU?\n");
/*
* If it's cycles then fall back to hrtimer
signal(SIGCHLD, sig_handler);
signal(SIGINT, sig_handler);
- if (!stat(output_name, &st) && !force && !append_file) {
- fprintf(stderr, "Error, output file %s exists, use -A to append or -f to overwrite.\n",
- output_name);
- exit(-1);
+ if (!stat(output_name, &st) && st.st_size) {
+ if (!force && !append_file) {
+ fprintf(stderr, "Error, output file %s exists, use -A to append or -f to overwrite.\n",
+ output_name);
+ exit(-1);
+ }
+ } else {
+ append_file = 0;
}
flags = O_CREAT|O_RDWR;
if (pid == -1)
pid = getpid();
- open_counters(-1, pid);
- } else for (i = 0; i < nr_cpus; i++)
- open_counters(i, target_pid);
+ open_counters(profile_cpu, pid);
+ } else {
+ if (profile_cpu != -1) {
+ open_counters(profile_cpu, target_pid);
+ } else {
+ for (i = 0; i < nr_cpus; i++)
+ open_counters(i, target_pid);
+ }
+ }
if (file_new)
perf_header__write(header, output);
if (!system_wide) {
- pid_synthesize_comm_event(pid, 0);
- pid_synthesize_mmap_samples(pid);
+ pid_t tgid = pid_synthesize_comm_event(pid, 0);
+ pid_synthesize_mmap_samples(pid, tgid);
} else
synthesize_all();
"record events on existing pid"),
OPT_INTEGER('r', "realtime", &realtime_prio,
"collect data with this RT SCHED_FIFO priority"),
+ OPT_BOOLEAN('R', "raw-samples", &raw_samples,
+ "collect raw sample records from all opened counters"),
OPT_BOOLEAN('a', "all-cpus", &system_wide,
"system-wide collection from all CPUs"),
OPT_BOOLEAN('A', "append", &append_file,
"append to the output file to do incremental profiling"),
+ OPT_INTEGER('C', "profile_cpu", &profile_cpu,
+ "CPU to profile on"),
OPT_BOOLEAN('f', "force", &force,
"overwrite existing data file"),
OPT_LONG('c', "count", &default_interval,
"be more verbose (show counter open errors, etc)"),
OPT_BOOLEAN('s', "stat", &inherit_stat,
"per thread counts"),
+ OPT_BOOLEAN('d', "data", &sample_address,
+ "Sample addresses"),
OPT_BOOLEAN('n', "no-samples", &no_samples,
"don't sample"),
OPT_END()
{
int counter;
- argc = parse_options(argc, argv, options, record_usage, 0);
+ argc = parse_options(argc, argv, options, record_usage,
+ PARSE_OPT_STOP_AT_NON_OPTION);
if (!argc && target_pid == -1 && !system_wide)
usage_with_options(record_usage, options);
static char const *input_name = "perf.data";
static char *vmlinux = NULL;
-static char default_sort_order[] = "comm,dso";
+static char default_sort_order[] = "comm,dso,symbol";
static char *sort_order = default_sort_order;
-static char *dso_list_str, *comm_list_str, *sym_list_str;
+static char *dso_list_str, *comm_list_str, *sym_list_str,
+ *col_width_list_str;
static struct strlist *dso_list, *comm_list, *sym_list;
+static char *field_sep;
+static int force;
static int input;
static int show_mask = SHOW_KERNEL | SHOW_USER | SHOW_HV;
static int modules;
static int full_paths;
+static int show_nr_samples;
static unsigned long page_size;
static unsigned long mmap_window = 32;
static
struct callchain_param callchain_param = {
- .mode = CHAIN_GRAPH_ABS,
+ .mode = CHAIN_GRAPH_REL,
.min_percent = 0.5
};
struct fork_event {
struct perf_event_header header;
u32 pid, ppid;
-};
-
-struct period_event {
- struct perf_event_header header;
- u64 time;
- u64 id;
- u64 sample_period;
+ u32 tid, ptid;
};
struct lost_event {
struct perf_event_header header;
u32 pid,tid;
u64 value;
- u64 format[3];
+ u64 time_enabled;
+ u64 time_running;
+ u64 id;
};
typedef union event_union {
struct mmap_event mmap;
struct comm_event comm;
struct fork_event fork;
- struct period_event period;
struct lost_event lost;
struct read_event read;
} event_t;
+static int repsep_fprintf(FILE *fp, const char *fmt, ...)
+{
+ int n;
+ va_list ap;
+
+ va_start(ap, fmt);
+ if (!field_sep)
+ n = vfprintf(fp, fmt, ap);
+ else {
+ char *bf = NULL;
+ n = vasprintf(&bf, fmt, ap);
+ if (n > 0) {
+ char *sep = bf;
+ while (1) {
+ sep = strchr(sep, *field_sep);
+ if (sep == NULL)
+ break;
+ *sep = '.';
+ }
+ }
+ fputs(bf, fp);
+ free(bf);
+ }
+ va_end(ap);
+ return n;
+}
+
static LIST_HEAD(dsos);
static struct dso *kernel_dso;
static struct dso *vdso;
{
int n = 0;
- while (pathname[n] == cwd[n] && n < cwdlen)
+ while (n < cwdlen && pathname[n] == cwd[n])
++n;
return n;
return self;
}
+static unsigned int dsos__col_width,
+ comms__col_width,
+ threads__col_width;
+
static int thread__set_comm(struct thread *self, const char *comm)
{
if (self->comm)
free(self->comm);
self->comm = strdup(comm);
- return self->comm ? 0 : -ENOMEM;
+ if (!self->comm)
+ return -ENOMEM;
+
+ if (!col_width_list_str && !field_sep &&
+ (!comm_list || strlist__has_entry(comm_list, comm))) {
+ unsigned int slen = strlen(comm);
+ if (slen > comms__col_width) {
+ comms__col_width = slen;
+ threads__col_width = slen + 6;
+ }
+ }
+
+ return 0;
}
static size_t thread__fprintf(struct thread *self, FILE *fp)
int64_t (*cmp)(struct hist_entry *, struct hist_entry *);
int64_t (*collapse)(struct hist_entry *, struct hist_entry *);
- size_t (*print)(FILE *fp, struct hist_entry *);
+ size_t (*print)(FILE *fp, struct hist_entry *, unsigned int width);
+ unsigned int *width;
+ bool elide;
};
static int64_t cmp_null(void *l, void *r)
}
static size_t
-sort__thread_print(FILE *fp, struct hist_entry *self)
+sort__thread_print(FILE *fp, struct hist_entry *self, unsigned int width)
{
- return fprintf(fp, "%16s:%5d", self->thread->comm ?: "", self->thread->pid);
+ return repsep_fprintf(fp, "%*s:%5d", width - 6,
+ self->thread->comm ?: "", self->thread->pid);
}
static struct sort_entry sort_thread = {
- .header = " Command: Pid",
+ .header = "Command: Pid",
.cmp = sort__thread_cmp,
.print = sort__thread_print,
+ .width = &threads__col_width,
};
/* --sort comm */
}
static size_t
-sort__comm_print(FILE *fp, struct hist_entry *self)
+sort__comm_print(FILE *fp, struct hist_entry *self, unsigned int width)
{
- return fprintf(fp, "%16s", self->thread->comm);
+ return repsep_fprintf(fp, "%*s", width, self->thread->comm);
}
static struct sort_entry sort_comm = {
- .header = " Command",
+ .header = "Command",
.cmp = sort__comm_cmp,
.collapse = sort__comm_collapse,
.print = sort__comm_print,
+ .width = &comms__col_width,
};
/* --sort dso */
}
static size_t
-sort__dso_print(FILE *fp, struct hist_entry *self)
+sort__dso_print(FILE *fp, struct hist_entry *self, unsigned int width)
{
if (self->dso)
- return fprintf(fp, "%-25s", self->dso->name);
+ return repsep_fprintf(fp, "%-*s", width, self->dso->name);
- return fprintf(fp, "%016llx ", (u64)self->ip);
+ return repsep_fprintf(fp, "%*llx", width, (u64)self->ip);
}
static struct sort_entry sort_dso = {
- .header = "Shared Object ",
+ .header = "Shared Object",
.cmp = sort__dso_cmp,
.print = sort__dso_print,
+ .width = &dsos__col_width,
};
/* --sort symbol */
}
static size_t
-sort__sym_print(FILE *fp, struct hist_entry *self)
+sort__sym_print(FILE *fp, struct hist_entry *self, unsigned int width __used)
{
size_t ret = 0;
if (verbose)
- ret += fprintf(fp, "%#018llx ", (u64)self->ip);
+ ret += repsep_fprintf(fp, "%#018llx %c ", (u64)self->ip,
+ dso__symtab_origin(self->dso));
+ ret += repsep_fprintf(fp, "[%c] ", self->level);
if (self->sym) {
- ret += fprintf(fp, "[%c] %s",
- self->dso == kernel_dso ? 'k' :
- self->dso == hypervisor_dso ? 'h' : '.', self->sym->name);
+ ret += repsep_fprintf(fp, "%s", self->sym->name);
if (self->sym->module)
- ret += fprintf(fp, "\t[%s]", self->sym->module->name);
+ ret += repsep_fprintf(fp, "\t[%s]",
+ self->sym->module->name);
} else {
- ret += fprintf(fp, "%#016llx", (u64)self->ip);
+ ret += repsep_fprintf(fp, "%#016llx", (u64)self->ip);
}
return ret;
}
static size_t
-sort__parent_print(FILE *fp, struct hist_entry *self)
+sort__parent_print(FILE *fp, struct hist_entry *self, unsigned int width)
{
- size_t ret = 0;
-
- ret += fprintf(fp, "%-20s", self->parent ? self->parent->name : "[other]");
-
- return ret;
+ return repsep_fprintf(fp, "%-*s", width,
+ self->parent ? self->parent->name : "[other]");
}
+static unsigned int parent_symbol__col_width;
+
static struct sort_entry sort_parent = {
- .header = "Parent symbol ",
+ .header = "Parent symbol",
.cmp = sort__parent_cmp,
.print = sort__parent_print,
+ .width = &parent_symbol__col_width,
};
static int sort__need_collapse = 0;
return ret;
}
+static struct symbol *rem_sq_bracket;
+static struct callchain_list rem_hits;
+
+static void init_rem_hits(void)
+{
+ rem_sq_bracket = malloc(sizeof(*rem_sq_bracket) + 6);
+ if (!rem_sq_bracket) {
+ fprintf(stderr, "Not enough memory to display remaining hits\n");
+ return;
+ }
+
+ strcpy(rem_sq_bracket->name, "[...]");
+ rem_hits.sym = rem_sq_bracket;
+}
+
static size_t
callchain__fprintf_graph(FILE *fp, struct callchain_node *self,
u64 total_samples, int depth, int depth_mask)
struct callchain_list *chain;
int new_depth_mask = depth_mask;
u64 new_total;
+ u64 remaining;
size_t ret = 0;
int i;
if (callchain_param.mode == CHAIN_GRAPH_REL)
- new_total = self->cumul_hit;
+ new_total = self->children_hit;
else
new_total = total_samples;
+ remaining = new_total;
+
node = rb_first(&self->rb_root);
while (node) {
+ u64 cumul;
+
child = rb_entry(node, struct callchain_node, rb_node);
+ cumul = cumul_hits(child);
+ remaining -= cumul;
/*
* The depth mask manages the output of pipes that show
* the depth. We don't want to keep the pipes of the current
- * level for the last child of this depth
+ * level for the last child of this depth.
+ * Except if we have remaining filtered hits. They will
+ * supersede the last child
*/
next = rb_next(node);
- if (!next)
+ if (!next && (callchain_param.mode != CHAIN_GRAPH_REL || !remaining))
new_depth_mask &= ~(1 << (depth - 1));
/*
ret += ipchain__fprintf_graph(fp, chain, depth,
new_depth_mask, i++,
new_total,
- child->cumul_hit);
+ cumul);
}
ret += callchain__fprintf_graph(fp, child, new_total,
depth + 1,
node = next;
}
+ if (callchain_param.mode == CHAIN_GRAPH_REL &&
+ remaining && remaining != new_total) {
+
+ if (!rem_sq_bracket)
+ return ret;
+
+ new_depth_mask &= ~(1 << (depth - 1));
+
+ ret += ipchain__fprintf_graph(fp, &rem_hits, depth,
+ new_depth_mask, 0, new_total,
+ remaining);
+ }
+
return ret;
}
return 0;
if (total_samples)
- ret = percent_color_fprintf(fp, " %6.2f%%",
- (self->count * 100.0) / total_samples);
+ ret = percent_color_fprintf(fp,
+ field_sep ? "%.2f" : " %6.2f%%",
+ (self->count * 100.0) / total_samples);
else
- ret = fprintf(fp, "%12Ld ", self->count);
+ ret = fprintf(fp, field_sep ? "%lld" : "%12lld ", self->count);
+
+ if (show_nr_samples) {
+ if (field_sep)
+ fprintf(fp, "%c%lld", *field_sep, self->count);
+ else
+ fprintf(fp, "%11lld", self->count);
+ }
list_for_each_entry(se, &hist_entry__sort_list, list) {
- if (exclude_other && (se == &sort_parent))
+ if (se->elide)
continue;
- fprintf(fp, " ");
- ret += se->print(fp, self);
+ fprintf(fp, "%s", field_sep ?: " ");
+ ret += se->print(fp, self, se->width ? *se->width : 0);
}
ret += fprintf(fp, "\n");
*
*/
+static void dso__calc_col_width(struct dso *self)
+{
+ if (!col_width_list_str && !field_sep &&
+ (!dso_list || strlist__has_entry(dso_list, self->name))) {
+ unsigned int slen = strlen(self->name);
+ if (slen > dsos__col_width)
+ dsos__col_width = slen;
+ }
+
+ self->slen_calculated = 1;
+}
+
static struct symbol *
resolve_symbol(struct thread *thread, struct map **mapp,
struct dso **dsop, u64 *ipp)
map = thread__find_map(thread, ip);
if (map != NULL) {
+ /*
+ * We have to do this here as we may have a dso
+ * with no symbol hit that has a name longer than
+ * the ones with symbols sampled.
+ */
+ if (!sort_dso.elide && !map->dso->slen_calculated)
+ dso__calc_col_width(map->dso);
+
if (mapp)
*mapp = map;
got_map:
struct sort_entry *se;
struct rb_node *nd;
size_t ret = 0;
+ unsigned int width;
+ char *col_width = col_width_list_str;
- fprintf(fp, "\n");
- fprintf(fp, "#\n");
- fprintf(fp, "# (%Ld samples)\n", (u64)total_samples);
+ init_rem_hits();
+
+ fprintf(fp, "# Samples: %Ld\n", (u64)total_samples);
fprintf(fp, "#\n");
fprintf(fp, "# Overhead");
+ if (show_nr_samples) {
+ if (field_sep)
+ fprintf(fp, "%cSamples", *field_sep);
+ else
+ fputs(" Samples ", fp);
+ }
list_for_each_entry(se, &hist_entry__sort_list, list) {
- if (exclude_other && (se == &sort_parent))
+ if (se->elide)
continue;
- fprintf(fp, " %s", se->header);
+ if (field_sep) {
+ fprintf(fp, "%c%s", *field_sep, se->header);
+ continue;
+ }
+ width = strlen(se->header);
+ if (se->width) {
+ if (col_width_list_str) {
+ if (col_width) {
+ *se->width = atoi(col_width);
+ col_width = strchr(col_width, ',');
+ if (col_width)
+ ++col_width;
+ }
+ }
+ width = *se->width = max(*se->width, width);
+ }
+ fprintf(fp, " %*s", width, se->header);
}
fprintf(fp, "\n");
+ if (field_sep)
+ goto print_entries;
+
fprintf(fp, "# ........");
+ if (show_nr_samples)
+ fprintf(fp, " ..........");
list_for_each_entry(se, &hist_entry__sort_list, list) {
unsigned int i;
- if (exclude_other && (se == &sort_parent))
+ if (se->elide)
continue;
fprintf(fp, " ");
- for (i = 0; i < strlen(se->header); i++)
+ if (se->width)
+ width = *se->width;
+ else
+ width = strlen(se->header);
+ for (i = 0; i < width; i++)
fprintf(fp, ".");
}
fprintf(fp, "\n");
fprintf(fp, "#\n");
+print_entries:
for (nd = rb_first(&output_hists); nd; nd = rb_next(nd)) {
pos = rb_entry(nd, struct hist_entry, rb_node);
ret += hist_entry__fprintf(fp, pos, total_samples);
if (sort_order == default_sort_order &&
parent_pattern == default_parent_pattern) {
fprintf(fp, "#\n");
- fprintf(fp, "# (For more details, try: perf report --sort comm,dso,symbol)\n");
+ fprintf(fp, "# (For a higher level overview, try: perf report --sort comm,dso)\n");
fprintf(fp, "#\n");
}
fprintf(fp, "\n");
+ free(rem_sq_bracket);
+
return ret;
}
more_data += sizeof(u64);
}
- dprintf("%p [%p]: PERF_EVENT_SAMPLE (IP, %d): %d: %p period: %Ld\n",
+ dprintf("%p [%p]: PERF_EVENT_SAMPLE (IP, %d): %d/%d: %p period: %Ld\n",
(void *)(offset + head),
(void *)(long)(event->header.size),
event->header.misc,
- event->ip.pid,
+ event->ip.pid, event->ip.tid,
(void *)(long)ip,
(long long)period);
if (show & show_mask) {
struct symbol *sym = resolve_symbol(thread, &map, &dso, &ip);
- if (dso_list && dso && dso->name && !strlist__has_entry(dso_list, dso->name))
+ if (dso_list && (!dso || !dso->name ||
+ !strlist__has_entry(dso_list, dso->name)))
return 0;
- if (sym_list && sym && !strlist__has_entry(sym_list, sym->name))
+ if (sym_list && (!sym || !strlist__has_entry(sym_list, sym->name)))
return 0;
if (hist_entry__add(thread, map, dso, sym, ip, chain, level, period)) {
struct thread *thread = threads__findnew(event->mmap.pid);
struct map *map = map__new(&event->mmap);
- dprintf("%p [%p]: PERF_EVENT_MMAP %d: [%p(%p) @ %p]: %s\n",
+ dprintf("%p [%p]: PERF_EVENT_MMAP %d/%d: [%p(%p) @ %p]: %s\n",
(void *)(offset + head),
(void *)(long)(event->header.size),
event->mmap.pid,
+ event->mmap.tid,
(void *)(long)event->mmap.start,
(void *)(long)event->mmap.len,
(void *)(long)event->mmap.pgoff,
}
static int
-process_fork_event(event_t *event, unsigned long offset, unsigned long head)
+process_task_event(event_t *event, unsigned long offset, unsigned long head)
{
struct thread *thread = threads__findnew(event->fork.pid);
struct thread *parent = threads__findnew(event->fork.ppid);
- dprintf("%p [%p]: PERF_EVENT_FORK: %d:%d\n",
+ dprintf("%p [%p]: PERF_EVENT_%s: (%d:%d):(%d:%d)\n",
(void *)(offset + head),
(void *)(long)(event->header.size),
- event->fork.pid, event->fork.ppid);
+ event->header.type == PERF_EVENT_FORK ? "FORK" : "EXIT",
+ event->fork.pid, event->fork.tid,
+ event->fork.ppid, event->fork.ptid);
+
+ /*
+ * A thread clone will have the same PID for both
+ * parent and child.
+ */
+ if (thread == parent)
+ return 0;
+
+ if (event->header.type == PERF_EVENT_EXIT)
+ return 0;
if (!thread || !parent || thread__fork(thread, parent)) {
dprintf("problem processing PERF_EVENT_FORK, skipping event.\n");
return 0;
}
-static int
-process_period_event(event_t *event, unsigned long offset, unsigned long head)
-{
- dprintf("%p [%p]: PERF_EVENT_PERIOD: time:%Ld, id:%Ld: period:%Ld\n",
- (void *)(offset + head),
- (void *)(long)(event->header.size),
- event->period.time,
- event->period.id,
- event->period.sample_period);
-
- return 0;
-}
-
static int
process_lost_event(event_t *event, unsigned long offset, unsigned long head)
{
dprintf(".\n");
}
+static struct perf_header *header;
+
+static struct perf_counter_attr *perf_header__find_attr(u64 id)
+{
+ int i;
+
+ for (i = 0; i < header->attrs; i++) {
+ struct perf_header_attr *attr = header->attr[i];
+ int j;
+
+ for (j = 0; j < attr->ids; j++) {
+ if (attr->id[j] == id)
+ return &attr->attr;
+ }
+ }
+
+ return NULL;
+}
+
static int
process_read_event(event_t *event, unsigned long offset, unsigned long head)
{
- dprintf("%p [%p]: PERF_EVENT_READ: %d %d %Lu\n",
+ struct perf_counter_attr *attr = perf_header__find_attr(event->read.id);
+
+ dprintf("%p [%p]: PERF_EVENT_READ: %d %d %s %Lu\n",
(void *)(offset + head),
(void *)(long)(event->header.size),
event->read.pid,
event->read.tid,
+ attr ? __event_name(attr->type, attr->config)
+ : "FAIL",
event->read.value);
return 0;
return process_comm_event(event, offset, head);
case PERF_EVENT_FORK:
- return process_fork_event(event, offset, head);
-
- case PERF_EVENT_PERIOD:
- return process_period_event(event, offset, head);
+ case PERF_EVENT_EXIT:
+ return process_task_event(event, offset, head);
case PERF_EVENT_LOST:
return process_lost_event(event, offset, head);
return 0;
}
-static struct perf_header *header;
-
static u64 perf_header__sample_type(void)
{
u64 sample_type = 0;
exit(-1);
}
+ if (!force && (stat.st_uid != geteuid())) {
+ fprintf(stderr, "file: %s not owned by current user\n", input_name);
+ exit(-1);
+ }
+
if (!stat.st_size) {
fprintf(stderr, "zero-sized file, nothing to do!\n");
exit(0);
" -g?\n");
exit(-1);
}
+ } else if (callchain_param.mode != CHAIN_NONE && !callchain) {
+ callchain = 1;
+ if (register_callchain_param(&callchain_param) < 0) {
+ fprintf(stderr, "Can't register callchain"
+ " params\n");
+ exit(-1);
+ }
}
if (load_kernel() < 0) {
else if (!strncmp(tok, "fractal", strlen(arg)))
callchain_param.mode = CHAIN_GRAPH_REL;
+ else if (!strncmp(tok, "none", strlen(arg))) {
+ callchain_param.mode = CHAIN_NONE;
+ callchain = 0;
+
+ return 0;
+ }
+
else
return -1;
OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace,
"dump raw trace in ASCII"),
OPT_STRING('k', "vmlinux", &vmlinux, "file", "vmlinux pathname"),
+ OPT_BOOLEAN('f', "force", &force, "don't complain, do it"),
OPT_BOOLEAN('m', "modules", &modules,
"load module symbols - WARNING: use only with -k and LIVE kernel"),
+ OPT_BOOLEAN('n', "show-nr-samples", &show_nr_samples,
+ "Show a column with the number of samples"),
OPT_STRING('s', "sort", &sort_order, "key[,key2...]",
"sort by key(s): pid, comm, dso, symbol, parent"),
OPT_BOOLEAN('P', "full-paths", &full_paths,
"regex filter to identify parent, see: '--sort parent'"),
OPT_BOOLEAN('x', "exclude-other", &exclude_other,
"Only display entries with parent-match"),
- OPT_CALLBACK_DEFAULT('c', "callchain", NULL, "output_type,min_percent",
+ OPT_CALLBACK_DEFAULT('g', "call-graph", NULL, "output_type,min_percent",
"Display callchains using output_type and min percent threshold. "
- "Default: flat,0", &parse_callchain_opt, callchain_default_opt),
+ "Default: fractal,0.5", &parse_callchain_opt, callchain_default_opt),
OPT_STRING('d', "dsos", &dso_list_str, "dso[,dso...]",
"only consider symbols in these dsos"),
OPT_STRING('C', "comms", &comm_list_str, "comm[,comm...]",
"only consider symbols in these comms"),
OPT_STRING('S', "symbols", &sym_list_str, "symbol[,symbol...]",
"only consider these symbols"),
+ OPT_STRING('w', "column-widths", &col_width_list_str,
+ "width[,width...]",
+ "don't try to adjust column width, use these fixed values"),
+ OPT_STRING('t', "field-separator", &field_sep, "separator",
+ "separator for columns, no spaces will be added between "
+ "columns '.' is reserved."),
OPT_END()
};
}
static void setup_list(struct strlist **list, const char *list_str,
- const char *list_name)
+ struct sort_entry *se, const char *list_name,
+ FILE *fp)
{
if (list_str) {
*list = strlist__new(true, list_str);
list_name);
exit(129);
}
+ if (strlist__nr_entries(*list) == 1) {
+ fprintf(fp, "# %s: %s\n", list_name,
+ strlist__entry(*list, 0)->s);
+ se->elide = true;
+ }
}
}
setup_sorting();
- if (parent_pattern != default_parent_pattern)
+ if (parent_pattern != default_parent_pattern) {
sort_dimension__add("parent");
- else
+ sort_parent.elide = 1;
+ } else
exclude_other = 0;
/*
if (argc)
usage_with_options(report_usage, options);
- setup_list(&dso_list, dso_list_str, "dso");
- setup_list(&comm_list, comm_list_str, "comm");
- setup_list(&sym_list, sym_list_str, "symbol");
-
setup_pager();
+ setup_list(&dso_list, dso_list_str, &sort_dso, "dso", stdout);
+ setup_list(&comm_list, comm_list_str, &sort_comm, "comm", stdout);
+ setup_list(&sym_list, sym_list_str, &sort_sym, "symbol", stdout);
+
+ if (field_sep && *field_sep == '.') {
+ fputs("'.' is the only non valid --field-separator argument\n",
+ stderr);
+ exit(129);
+ }
+
return __cmd_report();
}
"stat events on existing pid"),
OPT_BOOLEAN('a', "all-cpus", &system_wide,
"system-wide collection from all CPUs"),
- OPT_BOOLEAN('S', "scale", &scale,
+ OPT_BOOLEAN('c', "scale", &scale,
"scale/normalize counters"),
OPT_BOOLEAN('v', "verbose", &verbose,
"be more verbose (show counter open errors, etc)"),
{
int status;
- argc = parse_options(argc, argv, options, stat_usage, 0);
+ argc = parse_options(argc, argv, options, stat_usage,
+ PARSE_OPT_STOP_AT_NON_OPTION);
if (!argc)
usage_with_options(stat_usage, options);
if (run_count <= 0 || run_count > MAX_RUN)
#include <fcntl.h>
#include <stdio.h>
+#include <termios.h>
+#include <unistd.h>
#include <errno.h>
#include <time.h>
static int default_interval = 100000;
-static u64 count_filter = 5;
+static int count_filter = 5;
static int print_entries = 15;
static int target_pid = -1;
+static int inherit = 0;
static int profile_cpu = -1;
static int nr_cpus = 0;
static unsigned int realtime_prio = 0;
static int verbose = 0;
static char *vmlinux = NULL;
-static char *sym_filter;
-static unsigned long filter_start;
-static unsigned long filter_end;
-
static int delay_secs = 2;
static int zero;
static int dump_symtab;
+/*
+ * Source
+ */
+
+struct source_line {
+ u64 eip;
+ unsigned long count[MAX_COUNTERS];
+ char *line;
+ struct source_line *next;
+};
+
+static char *sym_filter = NULL;
+struct sym_entry *sym_filter_entry = NULL;
+static int sym_pcnt_filter = 5;
+static int sym_counter = 0;
+static int display_weighted = -1;
+
/*
* Symbols
*/
unsigned long snap_count;
double weight;
int skip;
+ struct source_line *source;
+ struct source_line *lines;
+ struct source_line **lines_tail;
+ pthread_mutex_t source_lock;
};
-struct sym_entry *sym_filter_entry;
+/*
+ * Source functions
+ */
+
+static void parse_source(struct sym_entry *syme)
+{
+ struct symbol *sym;
+ struct module *module;
+ struct section *section = NULL;
+ FILE *file;
+ char command[PATH_MAX*2], *path = vmlinux;
+ u64 start, end, len;
+
+ if (!syme)
+ return;
+
+ if (syme->lines) {
+ pthread_mutex_lock(&syme->source_lock);
+ goto out_assign;
+ }
+
+ sym = (struct symbol *)(syme + 1);
+ module = sym->module;
+
+ if (module)
+ path = module->path;
+ if (!path)
+ return;
+
+ start = sym->obj_start;
+ if (!start)
+ start = sym->start;
+
+ if (module) {
+ section = module->sections->find_section(module->sections, ".text");
+ if (section)
+ start -= section->vma;
+ }
+
+ end = start + sym->end - sym->start + 1;
+ len = sym->end - sym->start;
+
+ sprintf(command, "objdump --start-address=0x%016Lx --stop-address=0x%016Lx -dS %s", start, end, path);
+
+ file = popen(command, "r");
+ if (!file)
+ return;
+
+ pthread_mutex_lock(&syme->source_lock);
+ syme->lines_tail = &syme->lines;
+ while (!feof(file)) {
+ struct source_line *src;
+ size_t dummy = 0;
+ char *c;
+
+ src = malloc(sizeof(struct source_line));
+ assert(src != NULL);
+ memset(src, 0, sizeof(struct source_line));
+
+ if (getline(&src->line, &dummy, file) < 0)
+ break;
+ if (!src->line)
+ break;
+
+ c = strchr(src->line, '\n');
+ if (c)
+ *c = 0;
+
+ src->next = NULL;
+ *syme->lines_tail = src;
+ syme->lines_tail = &src->next;
+
+ if (strlen(src->line)>8 && src->line[8] == ':') {
+ src->eip = strtoull(src->line, NULL, 16);
+ if (section)
+ src->eip += section->vma;
+ }
+ if (strlen(src->line)>8 && src->line[16] == ':') {
+ src->eip = strtoull(src->line, NULL, 16);
+ if (section)
+ src->eip += section->vma;
+ }
+ }
+ pclose(file);
+out_assign:
+ sym_filter_entry = syme;
+ pthread_mutex_unlock(&syme->source_lock);
+}
+
+static void __zero_source_counters(struct sym_entry *syme)
+{
+ int i;
+ struct source_line *line;
+
+ line = syme->lines;
+ while (line) {
+ for (i = 0; i < nr_counters; i++)
+ line->count[i] = 0;
+ line = line->next;
+ }
+}
+
+static void record_precise_ip(struct sym_entry *syme, int counter, u64 ip)
+{
+ struct source_line *line;
+
+ if (syme != sym_filter_entry)
+ return;
+
+ if (pthread_mutex_trylock(&syme->source_lock))
+ return;
+
+ if (!syme->source)
+ goto out_unlock;
+
+ for (line = syme->lines; line; line = line->next) {
+ if (line->eip == ip) {
+ line->count[counter]++;
+ break;
+ }
+ if (line->eip > ip)
+ break;
+ }
+out_unlock:
+ pthread_mutex_unlock(&syme->source_lock);
+}
+
+static void lookup_sym_source(struct sym_entry *syme)
+{
+ struct symbol *symbol = (struct symbol *)(syme + 1);
+ struct source_line *line;
+ char pattern[PATH_MAX];
+ char *idx;
+
+ sprintf(pattern, "<%s>:", symbol->name);
+
+ if (symbol->module) {
+ idx = strstr(pattern, "\t");
+ if (idx)
+ *idx = 0;
+ }
+
+ pthread_mutex_lock(&syme->source_lock);
+ for (line = syme->lines; line; line = line->next) {
+ if (strstr(line->line, pattern)) {
+ syme->source = line;
+ break;
+ }
+ }
+ pthread_mutex_unlock(&syme->source_lock);
+}
+
+static void show_lines(struct source_line *queue, int count, int total)
+{
+ int i;
+ struct source_line *line;
+
+ line = queue;
+ for (i = 0; i < count; i++) {
+ float pcnt = 100.0*(float)line->count[sym_counter]/(float)total;
+
+ printf("%8li %4.1f%%\t%s\n", line->count[sym_counter], pcnt, line->line);
+ line = line->next;
+ }
+}
+
+#define TRACE_COUNT 3
+
+static void show_details(struct sym_entry *syme)
+{
+ struct symbol *symbol;
+ struct source_line *line;
+ struct source_line *line_queue = NULL;
+ int displayed = 0;
+ int line_queue_count = 0, total = 0, more = 0;
+
+ if (!syme)
+ return;
+
+ if (!syme->source)
+ lookup_sym_source(syme);
+
+ if (!syme->source)
+ return;
+
+ symbol = (struct symbol *)(syme + 1);
+ printf("Showing %s for %s\n", event_name(sym_counter), symbol->name);
+ printf(" Events Pcnt (>=%d%%)\n", sym_pcnt_filter);
+
+ pthread_mutex_lock(&syme->source_lock);
+ line = syme->source;
+ while (line) {
+ total += line->count[sym_counter];
+ line = line->next;
+ }
+
+ line = syme->source;
+ while (line) {
+ float pcnt = 0.0;
+
+ if (!line_queue_count)
+ line_queue = line;
+ line_queue_count++;
+
+ if (line->count[sym_counter])
+ pcnt = 100.0 * line->count[sym_counter] / (float)total;
+ if (pcnt >= (float)sym_pcnt_filter) {
+ if (displayed <= print_entries)
+ show_lines(line_queue, line_queue_count, total);
+ else more++;
+ displayed += line_queue_count;
+ line_queue_count = 0;
+ line_queue = NULL;
+ } else if (line_queue_count > TRACE_COUNT) {
+ line_queue = line_queue->next;
+ line_queue_count--;
+ }
+
+ line->count[sym_counter] = zero ? 0 : line->count[sym_counter] * 7 / 8;
+ line = line->next;
+ }
+ pthread_mutex_unlock(&syme->source_lock);
+ if (more)
+ printf("%d lines not displayed, maybe increase display entries [e]\n", more);
+}
struct dso *kernel_dso;
double weight = sym->snap_count;
int counter;
+ if (!display_weighted)
+ return weight;
+
for (counter = 1; counter < nr_counters-1; counter++)
weight *= sym->count[counter];
static void print_sym_table(void)
{
int printed = 0, j;
- int counter;
+ int counter, snap = !display_weighted ? sym_counter : 0;
float samples_per_sec = samples/delay_secs;
float ksamples_per_sec = (samples-userspace_samples)/delay_secs;
float sum_ksamples = 0.0;
pthread_mutex_unlock(&active_symbols_lock);
list_for_each_entry_safe_from(syme, n, &active_symbols, node) {
- syme->snap_count = syme->count[0];
+ syme->snap_count = syme->count[snap];
if (syme->snap_count != 0) {
syme->weight = sym_weight(syme);
rb_insert_active_sym(&tmp, syme);
samples_per_sec,
100.0 - (100.0*((samples_per_sec-ksamples_per_sec)/samples_per_sec)));
- if (nr_counters == 1) {
+ if (nr_counters == 1 || !display_weighted) {
printf("%Ld", (u64)attrs[0].sample_period);
if (freq)
printf("Hz ");
printf(" ");
}
- for (counter = 0; counter < nr_counters; counter++) {
+ if (!display_weighted)
+ printf("%s", event_name(sym_counter));
+ else for (counter = 0; counter < nr_counters; counter++) {
if (counter)
printf("/");
printf("------------------------------------------------------------------------------\n\n");
+ if (sym_filter_entry) {
+ show_details(sym_filter_entry);
+ return;
+ }
+
if (nr_counters == 1)
printf(" samples pcnt");
else
struct symbol *sym = (struct symbol *)(syme + 1);
double pcnt;
- if (++printed > print_entries || syme->snap_count < count_filter)
+ if (++printed > print_entries || (int)syme->snap_count < count_filter)
continue;
pcnt = 100.0 - (100.0 * ((sum_ksamples - syme->snap_count) /
sum_ksamples));
- if (nr_counters == 1)
+ if (nr_counters == 1 || !display_weighted)
printf("%20.2f - ", syme->weight);
else
printf("%9.1f %10ld - ", syme->weight, syme->snap_count);
}
}
+static void prompt_integer(int *target, const char *msg)
+{
+ char *buf = malloc(0), *p;
+ size_t dummy = 0;
+ int tmp;
+
+ fprintf(stdout, "\n%s: ", msg);
+ if (getline(&buf, &dummy, stdin) < 0)
+ return;
+
+ p = strchr(buf, '\n');
+ if (p)
+ *p = 0;
+
+ p = buf;
+ while(*p) {
+ if (!isdigit(*p))
+ goto out_free;
+ p++;
+ }
+ tmp = strtoul(buf, NULL, 10);
+ *target = tmp;
+out_free:
+ free(buf);
+}
+
+static void prompt_percent(int *target, const char *msg)
+{
+ int tmp = 0;
+
+ prompt_integer(&tmp, msg);
+ if (tmp >= 0 && tmp <= 100)
+ *target = tmp;
+}
+
+static void prompt_symbol(struct sym_entry **target, const char *msg)
+{
+ char *buf = malloc(0), *p;
+ struct sym_entry *syme = *target, *n, *found = NULL;
+ size_t dummy = 0;
+
+ /* zero counters of active symbol */
+ if (syme) {
+ pthread_mutex_lock(&syme->source_lock);
+ __zero_source_counters(syme);
+ *target = NULL;
+ pthread_mutex_unlock(&syme->source_lock);
+ }
+
+ fprintf(stdout, "\n%s: ", msg);
+ if (getline(&buf, &dummy, stdin) < 0)
+ goto out_free;
+
+ p = strchr(buf, '\n');
+ if (p)
+ *p = 0;
+
+ pthread_mutex_lock(&active_symbols_lock);
+ syme = list_entry(active_symbols.next, struct sym_entry, node);
+ pthread_mutex_unlock(&active_symbols_lock);
+
+ list_for_each_entry_safe_from(syme, n, &active_symbols, node) {
+ struct symbol *sym = (struct symbol *)(syme + 1);
+
+ if (!strcmp(buf, sym->name)) {
+ found = syme;
+ break;
+ }
+ }
+
+ if (!found) {
+ fprintf(stderr, "Sorry, %s is not active.\n", sym_filter);
+ sleep(1);
+ return;
+ } else
+ parse_source(found);
+
+out_free:
+ free(buf);
+}
+
+static void print_mapped_keys(void)
+{
+ char *name = NULL;
+
+ if (sym_filter_entry) {
+ struct symbol *sym = (struct symbol *)(sym_filter_entry+1);
+ name = sym->name;
+ }
+
+ fprintf(stdout, "\nMapped keys:\n");
+ fprintf(stdout, "\t[d] display refresh delay. \t(%d)\n", delay_secs);
+ fprintf(stdout, "\t[e] display entries (lines). \t(%d)\n", print_entries);
+
+ if (nr_counters > 1)
+ fprintf(stdout, "\t[E] active event counter. \t(%s)\n", event_name(sym_counter));
+
+ fprintf(stdout, "\t[f] profile display filter (count). \t(%d)\n", count_filter);
+
+ if (vmlinux) {
+ fprintf(stdout, "\t[F] annotate display filter (percent). \t(%d%%)\n", sym_pcnt_filter);
+ fprintf(stdout, "\t[s] annotate symbol. \t(%s)\n", name?: "NULL");
+ fprintf(stdout, "\t[S] stop annotation.\n");
+ }
+
+ if (nr_counters > 1)
+ fprintf(stdout, "\t[w] toggle display weighted/count[E]r. \t(%d)\n", display_weighted ? 1 : 0);
+
+ fprintf(stdout, "\t[z] toggle sample zeroing. \t(%d)\n", zero ? 1 : 0);
+ fprintf(stdout, "\t[qQ] quit.\n");
+}
+
+static int key_mapped(int c)
+{
+ switch (c) {
+ case 'd':
+ case 'e':
+ case 'f':
+ case 'z':
+ case 'q':
+ case 'Q':
+ return 1;
+ case 'E':
+ case 'w':
+ return nr_counters > 1 ? 1 : 0;
+ case 'F':
+ case 's':
+ case 'S':
+ return vmlinux ? 1 : 0;
+ }
+
+ return 0;
+}
+
+static void handle_keypress(int c)
+{
+ if (!key_mapped(c)) {
+ struct pollfd stdin_poll = { .fd = 0, .events = POLLIN };
+ struct termios tc, save;
+
+ print_mapped_keys();
+ fprintf(stdout, "\nEnter selection, or unmapped key to continue: ");
+ fflush(stdout);
+
+ tcgetattr(0, &save);
+ tc = save;
+ tc.c_lflag &= ~(ICANON | ECHO);
+ tc.c_cc[VMIN] = 0;
+ tc.c_cc[VTIME] = 0;
+ tcsetattr(0, TCSANOW, &tc);
+
+ poll(&stdin_poll, 1, -1);
+ c = getc(stdin);
+
+ tcsetattr(0, TCSAFLUSH, &save);
+ if (!key_mapped(c))
+ return;
+ }
+
+ switch (c) {
+ case 'd':
+ prompt_integer(&delay_secs, "Enter display delay");
+ break;
+ case 'e':
+ prompt_integer(&print_entries, "Enter display entries (lines)");
+ break;
+ case 'E':
+ if (nr_counters > 1) {
+ int i;
+
+ fprintf(stderr, "\nAvailable events:");
+ for (i = 0; i < nr_counters; i++)
+ fprintf(stderr, "\n\t%d %s", i, event_name(i));
+
+ prompt_integer(&sym_counter, "Enter details event counter");
+
+ if (sym_counter >= nr_counters) {
+ fprintf(stderr, "Sorry, no such event, using %s.\n", event_name(0));
+ sym_counter = 0;
+ sleep(1);
+ }
+ } else sym_counter = 0;
+ break;
+ case 'f':
+ prompt_integer(&count_filter, "Enter display event count filter");
+ break;
+ case 'F':
+ prompt_percent(&sym_pcnt_filter, "Enter details display event filter (percent)");
+ break;
+ case 'q':
+ case 'Q':
+ printf("exiting.\n");
+ exit(0);
+ case 's':
+ prompt_symbol(&sym_filter_entry, "Enter details symbol");
+ break;
+ case 'S':
+ if (!sym_filter_entry)
+ break;
+ else {
+ struct sym_entry *syme = sym_filter_entry;
+
+ pthread_mutex_lock(&syme->source_lock);
+ sym_filter_entry = NULL;
+ __zero_source_counters(syme);
+ pthread_mutex_unlock(&syme->source_lock);
+ }
+ break;
+ case 'w':
+ display_weighted = ~display_weighted;
+ break;
+ case 'z':
+ zero = ~zero;
+ break;
+ }
+}
+
static void *display_thread(void *arg __used)
{
struct pollfd stdin_poll = { .fd = 0, .events = POLLIN };
- int delay_msecs = delay_secs * 1000;
+ struct termios tc, save;
+ int delay_msecs, c;
+
+ tcgetattr(0, &save);
+ tc = save;
+ tc.c_lflag &= ~(ICANON | ECHO);
+ tc.c_cc[VMIN] = 0;
+ tc.c_cc[VTIME] = 0;
- printf("PerfTop refresh period: %d seconds\n", delay_secs);
+repeat:
+ delay_msecs = delay_secs * 1000;
+ tcsetattr(0, TCSANOW, &tc);
+ /* trash return*/
+ getc(stdin);
do {
print_sym_table();
} while (!poll(&stdin_poll, 1, delay_msecs) == 1);
- printf("key pressed - exiting.\n");
- exit(0);
+ c = getc(stdin);
+ tcsetattr(0, TCSAFLUSH, &save);
+
+ handle_keypress(c);
+ goto repeat;
return NULL;
}
"enter_idle",
"exit_idle",
"mwait_idle",
+ "mwait_idle_with_hints",
"ppc64_runlatch_off",
"pseries_dedicated_idle_sleep",
NULL
static int symbol_filter(struct dso *self, struct symbol *sym)
{
- static int filter_match;
struct sym_entry *syme;
const char *name = sym->name;
int i;
return 1;
syme = dso__sym_priv(self, sym);
+ pthread_mutex_init(&syme->source_lock, NULL);
+ if (!sym_filter_entry && sym_filter && !strcmp(name, sym_filter))
+ sym_filter_entry = syme;
+
for (i = 0; skip_symbols[i]; i++) {
if (!strcmp(skip_symbols[i], name)) {
syme->skip = 1;
}
}
- if (filter_match == 1) {
- filter_end = sym->start;
- filter_match = -1;
- if (filter_end - filter_start > 10000) {
- fprintf(stderr,
- "hm, too large filter symbol <%s> - skipping.\n",
- sym_filter);
- fprintf(stderr, "symbol filter start: %016lx\n",
- filter_start);
- fprintf(stderr, " end: %016lx\n",
- filter_end);
- filter_end = filter_start = 0;
- sym_filter = NULL;
- sleep(1);
- }
- }
-
- if (filter_match == 0 && sym_filter && !strcmp(name, sym_filter)) {
- filter_match = 1;
- filter_start = sym->start;
- }
-
-
return 0;
}
return -1;
}
-#define TRACE_COUNT 3
-
/*
* Binary search in the histogram table and record the hit:
*/
if (!syme->skip) {
syme->count[counter]++;
+ record_precise_ip(syme, counter, ip);
pthread_mutex_lock(&active_symbols_lock);
if (list_empty(&syme->node) || !syme->node.next)
__list_insert_active_sym(syme);
static void start_counter(int i, int counter)
{
struct perf_counter_attr *attr;
- unsigned int cpu;
+ int cpu;
cpu = profile_cpu;
if (target_pid == -1 && profile_cpu == -1)
attr->sample_type = PERF_SAMPLE_IP | PERF_SAMPLE_TID;
attr->freq = freq;
+ attr->inherit = (cpu < 0) && inherit;
try_again:
fd[i][counter] = sys_perf_counter_open(attr, target_pid, cpu, group_fd, 0);
"only display functions with more events than this"),
OPT_BOOLEAN('g', "group", &group,
"put the counters into a counter group"),
- OPT_STRING('s', "sym-filter", &sym_filter, "pattern",
- "only display symbols matchig this pattern"),
+ OPT_BOOLEAN('i', "inherit", &inherit,
+ "child tasks inherit counters"),
+ OPT_STRING('s', "sym-annotate", &sym_filter, "symbol name",
+ "symbol to annotate - requires -k option"),
OPT_BOOLEAN('z', "zero", &zero,
"zero history across updates"),
OPT_INTEGER('F', "freq", &freq,
delay_secs = 1;
parse_symbols();
+ parse_source(sym_filter_entry);
/*
* Fill in the ones not specifically initialized via -c:
#include "util/cache.h"
#include "util/quote.h"
#include "util/run-command.h"
+#include "util/parse-events.h"
+#include "util/string.h"
const char perf_usage_string[] =
"perf [--version] [--help] COMMAND [ARGS]";
int val;
};
+static char debugfs_mntpt[MAXPATHLEN];
+
static int pager_command_config(const char *var, const char *value, void *data)
{
struct pager_config *c = data;
}
}
+static void set_debugfs_path(void)
+{
+ char *path;
+
+ path = getenv(PERF_DEBUGFS_ENVIRONMENT);
+ snprintf(debugfs_path, MAXPATHLEN, "%s/%s", path ?: debugfs_mntpt,
+ "tracing/events");
+}
+
static int handle_options(const char*** argv, int* argc, int* envchanged)
{
int handled = 0;
setenv(PERF_WORK_TREE_ENVIRONMENT, cmd + 12, 1);
if (envchanged)
*envchanged = 1;
+ } else if (!strcmp(cmd, "--debugfs-dir")) {
+ if (*argc < 2) {
+ fprintf(stderr, "No directory given for --debugfs-dir.\n");
+ usage(perf_usage_string);
+ }
+ strncpy(debugfs_mntpt, (*argv)[1], MAXPATHLEN);
+ debugfs_mntpt[MAXPATHLEN - 1] = '\0';
+ if (envchanged)
+ *envchanged = 1;
+ (*argv)++;
+ (*argc)--;
+ } else if (!prefixcmp(cmd, "--debugfs-dir=")) {
+ strncpy(debugfs_mntpt, cmd + 14, MAXPATHLEN);
+ debugfs_mntpt[MAXPATHLEN - 1] = '\0';
+ if (envchanged)
+ *envchanged = 1;
} else {
fprintf(stderr, "Unknown option: %s\n", cmd);
usage(perf_usage_string);
if (use_pager == -1 && p->option & USE_PAGER)
use_pager = 1;
commit_pager_choice();
+ set_debugfs_path();
status = p->fn(argc, argv, prefix);
if (status)
return done_alias;
}
+/* mini /proc/mounts parser: searching for "^blah /mount/point debugfs" */
+static void get_debugfs_mntpt(void)
+{
+ FILE *file;
+ char fs_type[100];
+ char debugfs[MAXPATHLEN];
+
+ /*
+ * try the standard location
+ */
+ if (valid_debugfs_mount("/sys/kernel/debug/") == 0) {
+ strcpy(debugfs_mntpt, "/sys/kernel/debug/");
+ return;
+ }
+
+ /*
+ * try the sane location
+ */
+ if (valid_debugfs_mount("/debug/") == 0) {
+ strcpy(debugfs_mntpt, "/debug/");
+ return;
+ }
+
+ /*
+ * give up and parse /proc/mounts
+ */
+ file = fopen("/proc/mounts", "r");
+ if (file == NULL)
+ return;
+
+ while (fscanf(file, "%*s %"
+ STR(MAXPATHLEN)
+ "s %99s %*s %*d %*d\n",
+ debugfs, fs_type) == 2) {
+ if (strcmp(fs_type, "debugfs") == 0)
+ break;
+ }
+ fclose(file);
+ if (strcmp(fs_type, "debugfs") == 0) {
+ strncpy(debugfs_mntpt, debugfs, MAXPATHLEN);
+ debugfs_mntpt[MAXPATHLEN - 1] = '\0';
+ }
+}
int main(int argc, const char **argv)
{
cmd = perf_extract_argv0_path(argv[0]);
if (!cmd)
cmd = "perf-help";
-
+ /* get debugfs mount point from /proc/mounts */
+ get_debugfs_mntpt();
/*
* "perf-xxxx" is the same as "perf xxxx", but we obviously:
*
argc--;
handle_options(&argv, &argc, NULL);
commit_pager_choice();
+ set_debugfs_path();
if (argc > 0) {
if (!prefixcmp(argv[0], "--"))
argv[0] += 2;
#ifndef _PERF_PERF_H
#define _PERF_PERF_H
-#if defined(__x86_64__) || defined(__i386__)
+#if defined(__i386__)
+#include "../../arch/x86/include/asm/unistd.h"
+#define rmb() asm volatile("lock; addl $0,0(%%esp)" ::: "memory")
+#define cpu_relax() asm volatile("rep; nop" ::: "memory");
+#endif
+
+#if defined(__x86_64__)
#include "../../arch/x86/include/asm/unistd.h"
#define rmb() asm volatile("lfence" ::: "memory")
#define cpu_relax() asm volatile("rep; nop" ::: "memory");
#define PERFATTRIBUTES_FILE ".perfattributes"
#define INFOATTRIBUTES_FILE "info/attributes"
#define ATTRIBUTE_MACRO_PREFIX "[attr]"
+#define PERF_DEBUGFS_ENVIRONMENT "PERF_DEBUGFS_DIR"
typedef int (*config_fn_t)(const char *, const char *, void *);
extern int perf_default_config(const char *, const char *, void *);
#include <stdio.h>
#include <stdbool.h>
#include <errno.h>
+#include <math.h>
#include "callchain.h"
struct rb_node **p = &root->rb_node;
struct rb_node *parent = NULL;
struct callchain_node *rnode;
+ u64 chain_cumul = cumul_hits(chain);
while (*p) {
+ u64 rnode_cumul;
+
parent = *p;
rnode = rb_entry(parent, struct callchain_node, rb_node);
+ rnode_cumul = cumul_hits(rnode);
switch (mode) {
case CHAIN_FLAT:
break;
case CHAIN_GRAPH_ABS: /* Falldown */
case CHAIN_GRAPH_REL:
- if (rnode->cumul_hit < chain->cumul_hit)
+ if (rnode_cumul < chain_cumul)
p = &(*p)->rb_left;
else
p = &(*p)->rb_right;
chain_for_each_child(child, node) {
__sort_chain_graph_abs(child, min_hit);
- if (child->cumul_hit >= min_hit)
+ if (cumul_hits(child) >= min_hit)
rb_insert_callchain(&node->rb_root, child,
CHAIN_GRAPH_ABS);
}
u64 min_hit;
node->rb_root = RB_ROOT;
- min_hit = node->cumul_hit * min_percent / 100.0;
+ min_hit = ceil(node->children_hit * min_percent);
chain_for_each_child(child, node) {
__sort_chain_graph_rel(child, min_percent);
- if (child->cumul_hit >= min_hit)
+ if (cumul_hits(child) >= min_hit)
rb_insert_callchain(&node->rb_root, child,
CHAIN_GRAPH_REL);
}
sort_chain_graph_rel(struct rb_root *rb_root, struct callchain_node *chain_root,
u64 min_hit __used, struct callchain_param *param)
{
- __sort_chain_graph_rel(chain_root, param->min_percent);
+ __sort_chain_graph_rel(chain_root, param->min_percent / 100.0);
rb_root->rb_node = chain_root->rb_root.rb_node;
}
new = create_child(parent, false);
fill_node(new, chain, start, syms);
- new->cumul_hit = new->hit = 1;
+ new->children_hit = 0;
+ new->hit = 1;
}
/*
/* split the hits */
new->hit = parent->hit;
- new->cumul_hit = parent->cumul_hit;
+ new->children_hit = parent->children_hit;
+ parent->children_hit = cumul_hits(new);
new->val_nr = parent->val_nr - idx_local;
parent->val_nr = idx_local;
if (idx_total < chain->nr) {
parent->hit = 0;
add_child(parent, chain, idx_total, syms);
+ parent->children_hit++;
} else {
parent->hit = 1;
}
unsigned int ret = __append_chain(rnode, chain, start, syms);
if (!ret)
- goto cumul;
+ goto inc_children_hit;
}
/* nothing in children, add to the current node */
add_child(root, chain, start, syms);
-cumul:
- root->cumul_hit++;
+inc_children_hit:
+ root->children_hit++;
}
static int
/* we match 100% of the path, increment the hit */
if (i - start == root->val_nr && i == chain->nr) {
root->hit++;
- root->cumul_hit++;
-
return 0;
}
void append_chain(struct callchain_node *root, struct ip_callchain *chain,
struct symbol **syms)
{
+ if (!chain->nr)
+ return;
__append_chain_children(root, chain, syms, 0);
}
#include "symbol.h"
enum chain_mode {
+ CHAIN_NONE,
CHAIN_FLAT,
CHAIN_GRAPH_ABS,
CHAIN_GRAPH_REL
struct rb_root rb_root; /* sorted tree of children */
unsigned int val_nr;
u64 hit;
- u64 cumul_hit; /* hit + hits of children */
+ u64 children_hit;
};
struct callchain_param;
INIT_LIST_HEAD(&node->val);
}
+static inline u64 cumul_hits(struct callchain_node *node)
+{
+ return node->hit + node->children_hit;
+}
+
int register_callchain_param(struct callchain_param *param);
void append_chain(struct callchain_node *root, struct ip_callchain *chain,
struct symbol **syms);
if (ret < 0)
die("failed to read");
+ if (ret == 0)
+ die("failed to read: missing data");
size -= ret;
buf += ret;
for (i = 0; i < nr_attrs; i++) {
struct perf_header_attr *attr;
- off_t tmp = lseek(fd, 0, SEEK_CUR);
+ off_t tmp;
do_read(fd, &f_attr, sizeof(f_attr));
+ tmp = lseek(fd, 0, SEEK_CUR);
attr = perf_header_attr__new(&f_attr.attr);
int frozen;
int attrs, size;
struct perf_header_attr **attr;
- off_t attr_offset;
+ s64 attr_offset;
u64 data_offset;
u64 data_size;
};
(type *)((char *)__mptr - offsetof(type, member)); })
#endif
+#ifndef max
+#define max(x, y) ({ \
+ typeof(x) _max1 = (x); \
+ typeof(y) _max2 = (y); \
+ (void) (&_max1 == &_max2); \
+ _max1 > _max2 ? _max1 : _max2; })
+#endif
+
#endif
#include "parse-events.h"
#include "exec_cmd.h"
#include "string.h"
+#include "cache.h"
extern char *strcasestr(const char *haystack, const char *needle);
char *alias;
};
+char debugfs_path[MAXPATHLEN];
+
#define CHW(x) .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_##x
#define CSW(x) .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_##x
#define MAX_ALIASES 8
static char *hw_cache[][MAX_ALIASES] = {
- { "L1-d$", "l1-d", "l1d", "L1-data", },
- { "L1-i$", "l1-i", "l1i", "L1-instruction", },
+ { "L1-dcache", "l1-d", "l1d", "L1-data", },
+ { "L1-icache", "l1-i", "l1i", "L1-instruction", },
{ "LLC", "L2" },
{ "dTLB", "d-tlb", "Data-TLB", },
{ "iTLB", "i-tlb", "Instruction-TLB", },
[C(BPU)] = (CACHE_READ),
};
+#define for_each_subsystem(sys_dir, sys_dirent, sys_next, file, st) \
+ while (!readdir_r(sys_dir, &sys_dirent, &sys_next) && sys_next) \
+ if (snprintf(file, MAXPATHLEN, "%s/%s", debugfs_path, \
+ sys_dirent.d_name) && \
+ (!stat(file, &st)) && (S_ISDIR(st.st_mode)) && \
+ (strcmp(sys_dirent.d_name, ".")) && \
+ (strcmp(sys_dirent.d_name, "..")))
+
+static int tp_event_has_id(struct dirent *sys_dir, struct dirent *evt_dir)
+{
+ char evt_path[MAXPATHLEN];
+ int fd;
+
+ snprintf(evt_path, MAXPATHLEN, "%s/%s/%s/id", debugfs_path,
+ sys_dir->d_name, evt_dir->d_name);
+ fd = open(evt_path, O_RDONLY);
+ if (fd < 0)
+ return -EINVAL;
+ close(fd);
+
+ return 0;
+}
+
+#define for_each_event(sys_dirent, evt_dir, evt_dirent, evt_next, file, st) \
+ while (!readdir_r(evt_dir, &evt_dirent, &evt_next) && evt_next) \
+ if (snprintf(file, MAXPATHLEN, "%s/%s/%s", debugfs_path, \
+ sys_dirent.d_name, evt_dirent.d_name) && \
+ (!stat(file, &st)) && (S_ISDIR(st.st_mode)) && \
+ (strcmp(evt_dirent.d_name, ".")) && \
+ (strcmp(evt_dirent.d_name, "..")) && \
+ (!tp_event_has_id(&sys_dirent, &evt_dirent)))
+
+#define MAX_EVENT_LENGTH 30
+
+int valid_debugfs_mount(const char *debugfs)
+{
+ struct statfs st_fs;
+
+ if (statfs(debugfs, &st_fs) < 0)
+ return -ENOENT;
+ else if (st_fs.f_type != (long) DEBUGFS_MAGIC)
+ return -ENOENT;
+ return 0;
+}
+
+static char *tracepoint_id_to_name(u64 config)
+{
+ static char tracepoint_name[2 * MAX_EVENT_LENGTH];
+ DIR *sys_dir, *evt_dir;
+ struct dirent *sys_next, *evt_next, sys_dirent, evt_dirent;
+ struct stat st;
+ char id_buf[4];
+ int fd;
+ u64 id;
+ char evt_path[MAXPATHLEN];
+
+ if (valid_debugfs_mount(debugfs_path))
+ return "unkown";
+
+ sys_dir = opendir(debugfs_path);
+ if (!sys_dir)
+ goto cleanup;
+
+ for_each_subsystem(sys_dir, sys_dirent, sys_next, evt_path, st) {
+ evt_dir = opendir(evt_path);
+ if (!evt_dir)
+ goto cleanup;
+ for_each_event(sys_dirent, evt_dir, evt_dirent, evt_next,
+ evt_path, st) {
+ snprintf(evt_path, MAXPATHLEN, "%s/%s/%s/id",
+ debugfs_path, sys_dirent.d_name,
+ evt_dirent.d_name);
+ fd = open(evt_path, O_RDONLY);
+ if (fd < 0)
+ continue;
+ if (read(fd, id_buf, sizeof(id_buf)) < 0) {
+ close(fd);
+ continue;
+ }
+ close(fd);
+ id = atoll(id_buf);
+ if (id == config) {
+ closedir(evt_dir);
+ closedir(sys_dir);
+ snprintf(tracepoint_name, 2 * MAX_EVENT_LENGTH,
+ "%s:%s", sys_dirent.d_name,
+ evt_dirent.d_name);
+ return tracepoint_name;
+ }
+ }
+ closedir(evt_dir);
+ }
+
+cleanup:
+ closedir(sys_dir);
+ return "unkown";
+}
+
static int is_cache_op_valid(u8 cache_type, u8 cache_op)
{
if (hw_cache_stat[cache_type] & COP(cache_op))
{
u64 config = attrs[counter].config;
int type = attrs[counter].type;
+
+ return __event_name(type, config);
+}
+
+char *__event_name(int type, u64 config)
+{
static char buf[32];
- if (attrs[counter].type == PERF_TYPE_RAW) {
+ if (type == PERF_TYPE_RAW) {
sprintf(buf, "raw 0x%llx", config);
return buf;
}
return sw_event_names[config];
return "unknown-software";
+ case PERF_TYPE_TRACEPOINT:
+ return tracepoint_id_to_name(config);
+
default:
break;
}
return 1;
}
+static int parse_tracepoint_event(const char **strp,
+ struct perf_counter_attr *attr)
+{
+ const char *evt_name;
+ char *flags;
+ char sys_name[MAX_EVENT_LENGTH];
+ char id_buf[4];
+ int fd;
+ unsigned int sys_length, evt_length;
+ u64 id;
+ char evt_path[MAXPATHLEN];
+
+ if (valid_debugfs_mount(debugfs_path))
+ return 0;
+
+ evt_name = strchr(*strp, ':');
+ if (!evt_name)
+ return 0;
+
+ sys_length = evt_name - *strp;
+ if (sys_length >= MAX_EVENT_LENGTH)
+ return 0;
+
+ strncpy(sys_name, *strp, sys_length);
+ sys_name[sys_length] = '\0';
+ evt_name = evt_name + 1;
+
+ flags = strchr(evt_name, ':');
+ if (flags) {
+ *flags = '\0';
+ flags++;
+ if (!strncmp(flags, "record", strlen(flags)))
+ attr->sample_type |= PERF_SAMPLE_RAW;
+ }
+
+ evt_length = strlen(evt_name);
+ if (evt_length >= MAX_EVENT_LENGTH)
+ return 0;
+
+ snprintf(evt_path, MAXPATHLEN, "%s/%s/%s/id", debugfs_path,
+ sys_name, evt_name);
+ fd = open(evt_path, O_RDONLY);
+ if (fd < 0)
+ return 0;
+
+ if (read(fd, id_buf, sizeof(id_buf)) < 0) {
+ close(fd);
+ return 0;
+ }
+ close(fd);
+ id = atoll(id_buf);
+ attr->config = id;
+ attr->type = PERF_TYPE_TRACEPOINT;
+ *strp = evt_name + evt_length;
+ return 1;
+}
+
static int check_events(const char *str, unsigned int i)
{
int n;
*/
static int parse_event_symbols(const char **str, struct perf_counter_attr *attr)
{
- if (!(parse_raw_event(str, attr) ||
+ if (!(parse_tracepoint_event(str, attr) ||
+ parse_raw_event(str, attr) ||
parse_numeric_event(str, attr) ||
parse_symbolic_event(str, attr) ||
parse_generic_hw_event(str, attr)))
"Hardware cache event",
};
+/*
+ * Print the events from <debugfs_mount_point>/tracing/events
+ */
+
+static void print_tracepoint_events(void)
+{
+ DIR *sys_dir, *evt_dir;
+ struct dirent *sys_next, *evt_next, sys_dirent, evt_dirent;
+ struct stat st;
+ char evt_path[MAXPATHLEN];
+
+ if (valid_debugfs_mount(debugfs_path))
+ return;
+
+ sys_dir = opendir(debugfs_path);
+ if (!sys_dir)
+ goto cleanup;
+
+ for_each_subsystem(sys_dir, sys_dirent, sys_next, evt_path, st) {
+ evt_dir = opendir(evt_path);
+ if (!evt_dir)
+ goto cleanup;
+ for_each_event(sys_dirent, evt_dir, evt_dirent, evt_next,
+ evt_path, st) {
+ snprintf(evt_path, MAXPATHLEN, "%s:%s",
+ sys_dirent.d_name, evt_dirent.d_name);
+ fprintf(stderr, " %-40s [%s]\n", evt_path,
+ event_type_descriptors[PERF_TYPE_TRACEPOINT+1]);
+ }
+ closedir(evt_dir);
+ }
+
+cleanup:
+ closedir(sys_dir);
+}
+
/*
* Print the help text for the event symbols:
*/
for (i = 0; i < ARRAY_SIZE(event_symbols); i++, syms++) {
type = syms->type + 1;
- if (type > ARRAY_SIZE(event_type_descriptors))
+ if (type >= ARRAY_SIZE(event_type_descriptors))
type = 0;
if (type != prev_type)
"rNNN");
fprintf(stderr, "\n");
+ print_tracepoint_events();
+
exit(129);
}
* Parse symbolic events/counts passed in as options:
*/
+struct option;
+
extern int nr_counters;
extern struct perf_counter_attr attrs[MAX_COUNTERS];
extern char *event_name(int ctr);
+extern char *__event_name(int type, u64 config);
extern int parse_events(const struct option *opt, const char *str, int unset);
extern void print_events(void);
+extern char debugfs_path[];
+extern int valid_debugfs_mount(const char *debugfs);
+
strbuf_addch(out, '"');
if (prefix) {
int off = 0;
- while (prefix[off] && off < len && prefix[off] == in[off])
+ while (off < len && prefix[off] && prefix[off] == in[off])
if (prefix[off] == '/') {
prefix += off + 1;
in += off + 1;
int hex2u64(const char *ptr, u64 *val);
+#define _STR(x) #x
+#define STR(x) _STR(x)
+
#endif
rb_link_node(&sn->rb_node, parent, p);
rb_insert_color(&sn->rb_node, &self->entries);
+ ++self->nr_entries;
return 0;
}
struct strlist *self = malloc(sizeof(*self));
if (self != NULL) {
- self->entries = RB_ROOT;
- self->dupstr = dupstr;
+ self->entries = RB_ROOT;
+ self->dupstr = dupstr;
+ self->nr_entries = 0;
if (slist && strlist__parse_list(self, slist) != 0)
goto out_error;
}
free(self);
}
}
+
+struct str_node *strlist__entry(const struct strlist *self, unsigned int idx)
+{
+ struct rb_node *nd;
+
+ for (nd = rb_first(&self->entries); nd; nd = rb_next(nd)) {
+ struct str_node *pos = rb_entry(nd, struct str_node, rb_node);
+
+ if (!idx--)
+ return pos;
+ }
+
+ return NULL;
+}
struct strlist {
struct rb_root entries;
- bool dupstr;
+ unsigned int nr_entries;
+ bool dupstr;
};
struct strlist *strlist__new(bool dupstr, const char *slist);
int strlist__load(struct strlist *self, const char *filename);
int strlist__add(struct strlist *self, const char *str);
+struct str_node *strlist__entry(const struct strlist *self, unsigned int idx);
bool strlist__has_entry(struct strlist *self, const char *entry);
static inline bool strlist__empty(const struct strlist *self)
{
- return rb_first(&self->entries) == NULL;
+ return self->nr_entries == 0;
+}
+
+static inline unsigned int strlist__nr_entries(const struct strlist *self)
+{
+ return self->nr_entries;
}
int strlist__parse_list(struct strlist *self, const char *s);
const char *sym_hist_filter;
+enum dso_origin {
+ DSO__ORIG_KERNEL = 0,
+ DSO__ORIG_JAVA_JIT,
+ DSO__ORIG_FEDORA,
+ DSO__ORIG_UBUNTU,
+ DSO__ORIG_BUILDID,
+ DSO__ORIG_DSO,
+ DSO__ORIG_NOT_FOUND,
+};
+
static struct symbol *symbol__new(u64 start, u64 len,
const char *name, unsigned int priv_size,
u64 obj_start, int verbose)
self->syms = RB_ROOT;
self->sym_priv_size = sym_priv_size;
self->find_symbol = dso__find_symbol;
+ self->slen_calculated = 0;
+ self->origin = DSO__ORIG_NOT_FOUND;
}
return self;
idx < nr_entries; \
++idx, pos = gelf_getrela(reldata, idx, &pos_mem))
-static int dso__synthesize_plt_symbols(struct dso *self, Elf *elf,
- GElf_Ehdr *ehdr, Elf_Scn *scn_dynsym,
- GElf_Shdr *shdr_dynsym,
- size_t dynsym_idx, int verbose)
+/*
+ * We need to check if we have a .dynsym, so that we can handle the
+ * .plt, synthesizing its symbols, that aren't on the symtabs (be it
+ * .dynsym or .symtab).
+ * And always look at the original dso, not at debuginfo packages, that
+ * have the PLT data stripped out (shdr_rel_plt.sh_type == SHT_NOBITS).
+ */
+static int dso__synthesize_plt_symbols(struct dso *self, int verbose)
{
uint32_t nr_rel_entries, idx;
GElf_Sym sym;
u64 plt_offset;
GElf_Shdr shdr_plt;
struct symbol *f;
- GElf_Shdr shdr_rel_plt;
+ GElf_Shdr shdr_rel_plt, shdr_dynsym;
Elf_Data *reldata, *syms, *symstrs;
- Elf_Scn *scn_plt_rel, *scn_symstrs;
+ Elf_Scn *scn_plt_rel, *scn_symstrs, *scn_dynsym;
+ size_t dynsym_idx;
+ GElf_Ehdr ehdr;
char sympltname[1024];
- int nr = 0, symidx;
+ Elf *elf;
+ int nr = 0, symidx, fd, err = 0;
+
+ fd = open(self->name, O_RDONLY);
+ if (fd < 0)
+ goto out;
- scn_plt_rel = elf_section_by_name(elf, ehdr, &shdr_rel_plt,
+ elf = elf_begin(fd, ELF_C_READ_MMAP, NULL);
+ if (elf == NULL)
+ goto out_close;
+
+ if (gelf_getehdr(elf, &ehdr) == NULL)
+ goto out_elf_end;
+
+ scn_dynsym = elf_section_by_name(elf, &ehdr, &shdr_dynsym,
+ ".dynsym", &dynsym_idx);
+ if (scn_dynsym == NULL)
+ goto out_elf_end;
+
+ scn_plt_rel = elf_section_by_name(elf, &ehdr, &shdr_rel_plt,
".rela.plt", NULL);
if (scn_plt_rel == NULL) {
- scn_plt_rel = elf_section_by_name(elf, ehdr, &shdr_rel_plt,
+ scn_plt_rel = elf_section_by_name(elf, &ehdr, &shdr_rel_plt,
".rel.plt", NULL);
if (scn_plt_rel == NULL)
- return 0;
+ goto out_elf_end;
}
+ err = -1;
+
if (shdr_rel_plt.sh_link != dynsym_idx)
- return 0;
+ goto out_elf_end;
- if (elf_section_by_name(elf, ehdr, &shdr_plt, ".plt", NULL) == NULL)
- return 0;
+ if (elf_section_by_name(elf, &ehdr, &shdr_plt, ".plt", NULL) == NULL)
+ goto out_elf_end;
/*
* Fetch the relocation section to find the indexes to the GOT
*/
reldata = elf_getdata(scn_plt_rel, NULL);
if (reldata == NULL)
- return -1;
+ goto out_elf_end;
syms = elf_getdata(scn_dynsym, NULL);
if (syms == NULL)
- return -1;
+ goto out_elf_end;
- scn_symstrs = elf_getscn(elf, shdr_dynsym->sh_link);
+ scn_symstrs = elf_getscn(elf, shdr_dynsym.sh_link);
if (scn_symstrs == NULL)
- return -1;
+ goto out_elf_end;
symstrs = elf_getdata(scn_symstrs, NULL);
if (symstrs == NULL)
- return -1;
+ goto out_elf_end;
nr_rel_entries = shdr_rel_plt.sh_size / shdr_rel_plt.sh_entsize;
plt_offset = shdr_plt.sh_offset;
f = symbol__new(plt_offset, shdr_plt.sh_entsize,
sympltname, self->sym_priv_size, 0, verbose);
if (!f)
- return -1;
+ goto out_elf_end;
dso__insert_symbol(self, f);
++nr;
f = symbol__new(plt_offset, shdr_plt.sh_entsize,
sympltname, self->sym_priv_size, 0, verbose);
if (!f)
- return -1;
+ goto out_elf_end;
dso__insert_symbol(self, f);
++nr;
}
- } else {
- /*
- * TODO: There are still one more shdr_rel_plt.sh_type
- * I have to investigate, but probably should be ignored.
- */
}
- return nr;
+ err = 0;
+out_elf_end:
+ elf_end(elf);
+out_close:
+ close(fd);
+
+ if (err == 0)
+ return nr;
+out:
+ fprintf(stderr, "%s: problems reading %s PLT info.\n",
+ __func__, self->name);
+ return 0;
}
static int dso__load_sym(struct dso *self, int fd, const char *name,
GElf_Shdr shdr;
Elf_Data *syms;
GElf_Sym sym;
- Elf_Scn *sec, *sec_dynsym, *sec_strndx;
+ Elf_Scn *sec, *sec_strndx;
Elf *elf;
- size_t dynsym_idx;
- int nr = 0;
+ int nr = 0, kernel = !strcmp("[kernel]", self->name);
elf = elf_begin(fd, ELF_C_READ_MMAP, NULL);
if (elf == NULL) {
goto out_elf_end;
}
- /*
- * We need to check if we have a .dynsym, so that we can handle the
- * .plt, synthesizing its symbols, that aren't on the symtabs (be it
- * .dynsym or .symtab)
- */
- sec_dynsym = elf_section_by_name(elf, &ehdr, &shdr,
- ".dynsym", &dynsym_idx);
- if (sec_dynsym != NULL) {
- nr = dso__synthesize_plt_symbols(self, elf, &ehdr,
- sec_dynsym, &shdr,
- dynsym_idx, verbose);
- if (nr < 0)
- goto out_elf_end;
- }
-
- /*
- * But if we have a full .symtab (that is a superset of .dynsym) we
- * should add the symbols not in the .dynsyn
- */
sec = elf_section_by_name(elf, &ehdr, &shdr, ".symtab", NULL);
if (sec == NULL) {
- if (sec_dynsym == NULL)
+ sec = elf_section_by_name(elf, &ehdr, &shdr, ".dynsym", NULL);
+ if (sec == NULL)
goto out_elf_end;
-
- sec = sec_dynsym;
- gelf_getshdr(sec, &shdr);
}
syms = elf_getdata(sec, NULL);
goto out_elf_end;
secstrs = elf_getdata(sec_strndx, NULL);
- if (symstrs == NULL)
+ if (secstrs == NULL)
goto out_elf_end;
nr_syms = shdr.sh_size / shdr.sh_entsize;
memset(&sym, 0, sizeof(sym));
- self->adjust_symbols = (ehdr.e_type == ET_EXEC ||
+ if (!kernel) {
+ self->adjust_symbols = (ehdr.e_type == ET_EXEC ||
elf_section_by_name(elf, &ehdr, &shdr,
".gnu.prelink_undo",
NULL) != NULL);
+ } else self->adjust_symbols = 0;
+
elf_symtab__for_each_symbol(syms, nr_syms, index, sym) {
struct symbol *f;
+ const char *name;
+ char *demangled;
u64 obj_start;
struct section *section = NULL;
int is_label = elf_sym__is_label(&sym);
goto out_elf_end;
}
}
+ /*
+ * We need to figure out if the object was created from C++ sources
+ * DWARF DW_compile_unit has this, but we don't always have access
+ * to it...
+ */
+ name = elf_sym__name(&sym, symstrs);
+ demangled = bfd_demangle(NULL, name, DMGL_PARAMS | DMGL_ANSI);
+ if (demangled != NULL)
+ name = demangled;
- f = symbol__new(sym.st_value, sym.st_size,
- elf_sym__name(&sym, symstrs),
+ f = symbol__new(sym.st_value, sym.st_size, name,
self->sym_priv_size, obj_start, verbose);
+ free(demangled);
if (!f)
goto out_elf_end;
return err;
}
+#define BUILD_ID_SIZE 128
+
+static char *dso__read_build_id(struct dso *self, int verbose)
+{
+ int i;
+ GElf_Ehdr ehdr;
+ GElf_Shdr shdr;
+ Elf_Data *build_id_data;
+ Elf_Scn *sec;
+ char *build_id = NULL, *bid;
+ unsigned char *raw;
+ Elf *elf;
+ int fd = open(self->name, O_RDONLY);
+
+ if (fd < 0)
+ goto out;
+
+ elf = elf_begin(fd, ELF_C_READ_MMAP, NULL);
+ if (elf == NULL) {
+ if (verbose)
+ fprintf(stderr, "%s: cannot read %s ELF file.\n",
+ __func__, self->name);
+ goto out_close;
+ }
+
+ if (gelf_getehdr(elf, &ehdr) == NULL) {
+ if (verbose)
+ fprintf(stderr, "%s: cannot get elf header.\n", __func__);
+ goto out_elf_end;
+ }
+
+ sec = elf_section_by_name(elf, &ehdr, &shdr, ".note.gnu.build-id", NULL);
+ if (sec == NULL)
+ goto out_elf_end;
+
+ build_id_data = elf_getdata(sec, NULL);
+ if (build_id_data == NULL)
+ goto out_elf_end;
+ build_id = malloc(BUILD_ID_SIZE);
+ if (build_id == NULL)
+ goto out_elf_end;
+ raw = build_id_data->d_buf + 16;
+ bid = build_id;
+
+ for (i = 0; i < 20; ++i) {
+ sprintf(bid, "%02x", *raw);
+ ++raw;
+ bid += 2;
+ }
+ if (verbose >= 2)
+ printf("%s(%s): %s\n", __func__, self->name, build_id);
+out_elf_end:
+ elf_end(elf);
+out_close:
+ close(fd);
+out:
+ return build_id;
+}
+
+char dso__symtab_origin(const struct dso *self)
+{
+ static const char origin[] = {
+ [DSO__ORIG_KERNEL] = 'k',
+ [DSO__ORIG_JAVA_JIT] = 'j',
+ [DSO__ORIG_FEDORA] = 'f',
+ [DSO__ORIG_UBUNTU] = 'u',
+ [DSO__ORIG_BUILDID] = 'b',
+ [DSO__ORIG_DSO] = 'd',
+ };
+
+ if (self == NULL || self->origin == DSO__ORIG_NOT_FOUND)
+ return '!';
+ return origin[self->origin];
+}
+
int dso__load(struct dso *self, symbol_filter_t filter, int verbose)
{
- int size = strlen(self->name) + sizeof("/usr/lib/debug%s.debug");
- char *name = malloc(size);
- int variant = 0;
+ int size = PATH_MAX;
+ char *name = malloc(size), *build_id = NULL;
int ret = -1;
int fd;
self->adjust_symbols = 0;
- if (strncmp(self->name, "/tmp/perf-", 10) == 0)
- return dso__load_perf_map(self, filter, verbose);
+ if (strncmp(self->name, "/tmp/perf-", 10) == 0) {
+ ret = dso__load_perf_map(self, filter, verbose);
+ self->origin = ret > 0 ? DSO__ORIG_JAVA_JIT :
+ DSO__ORIG_NOT_FOUND;
+ return ret;
+ }
+
+ self->origin = DSO__ORIG_FEDORA - 1;
more:
do {
- switch (variant) {
- case 0: /* Fedora */
+ self->origin++;
+ switch (self->origin) {
+ case DSO__ORIG_FEDORA:
snprintf(name, size, "/usr/lib/debug%s.debug", self->name);
break;
- case 1: /* Ubuntu */
+ case DSO__ORIG_UBUNTU:
snprintf(name, size, "/usr/lib/debug%s", self->name);
break;
- case 2: /* Sane people */
+ case DSO__ORIG_BUILDID:
+ build_id = dso__read_build_id(self, verbose);
+ if (build_id != NULL) {
+ snprintf(name, size,
+ "/usr/lib/debug/.build-id/%.2s/%s.debug",
+ build_id, build_id + 2);
+ free(build_id);
+ break;
+ }
+ self->origin++;
+ /* Fall thru */
+ case DSO__ORIG_DSO:
snprintf(name, size, "%s", self->name);
break;
default:
goto out;
}
- variant++;
fd = open(name, O_RDONLY);
} while (fd < 0);
if (!ret)
goto more;
+ if (ret > 0) {
+ int nr_plt = dso__synthesize_plt_symbols(self, verbose);
+ if (nr_plt > 0)
+ ret += nr_plt;
+ }
out:
free(name);
+ if (ret < 0 && strstr(self->name, " (deleted)") != NULL)
+ return 0;
return ret;
}
if (err <= 0)
err = dso__load_kallsyms(self, filter, verbose);
+ if (err > 0)
+ self->origin = DSO__ORIG_KERNEL;
+
return err;
}
#include <linux/rbtree.h>
#include "module.h"
+#ifdef HAVE_CPLUS_DEMANGLE
+extern char *cplus_demangle(const char *, int);
+
+static inline char *bfd_demangle(void __used *v, const char *c, int i)
+{
+ return cplus_demangle(c, i);
+}
+#else
+#ifdef NO_DEMANGLE
+static inline char *bfd_demangle(void __used *v, const char __used *c,
+ int __used i)
+{
+ return NULL;
+}
+#else
+#include <bfd.h>
+#endif
+#endif
+
+#ifndef DMGL_PARAMS
+#define DMGL_PARAMS (1 << 0) /* Include function args */
+#define DMGL_ANSI (1 << 1) /* Include const, volatile, etc */
+#endif
+
struct symbol {
struct rb_node rb_node;
u64 start;
struct symbol *(*find_symbol)(struct dso *, u64 ip);
unsigned int sym_priv_size;
unsigned char adjust_symbols;
+ unsigned char slen_calculated;
+ unsigned char origin;
char name[0];
};
int dso__load(struct dso *self, symbol_filter_t filter, int verbose);
size_t dso__fprintf(struct dso *self, FILE *fp);
+char dso__symtab_origin(const struct dso *self);
void symbol__init(void);
#endif /* _PERF_SYMBOL_ */
#include <unistd.h>
#include <stdio.h>
#include <sys/stat.h>
+#include <sys/statfs.h>
#include <fcntl.h>
#include <stddef.h>
#include <stdlib.h>
#include <netdb.h>
#include <pwd.h>
#include <inttypes.h>
+#include "../../../include/linux/magic.h"
#ifndef NO_ICONV
#include <iconv.h>
if (injected && pent->fields.trig_mode == IOAPIC_LEVEL_TRIG)
pent->fields.remote_irr = 1;
}
- if (!pent->fields.trig_mode)
- ioapic->irr &= ~(1 << idx);
return injected;
}
mask_after = ioapic->redirtbl[index].fields.mask;
if (mask_before != mask_after)
kvm_fire_mask_notifiers(ioapic->kvm, index, mask_after);
- if (ioapic->irr & (1 << index))
+ if (ioapic->redirtbl[index].fields.trig_mode == IOAPIC_LEVEL_TRIG
+ && ioapic->irr & (1 << index))
ioapic_service(ioapic, index);
break;
}
if (!level)
ioapic->irr &= ~mask;
else {
+ int edge = (entry.fields.trig_mode == IOAPIC_EDGE_TRIG);
ioapic->irr |= mask;
- if ((!entry.fields.trig_mode && old_irr != ioapic->irr)
- || !entry.fields.remote_irr)
+ if ((edge && old_irr != ioapic->irr) ||
+ (!edge && !entry.fields.remote_irr))
ret = ioapic_service(ioapic, irq);
}
}
unsigned gsi = pin;
list_for_each_entry(e, &kvm->irq_routing, link)
- if (e->irqchip.irqchip == irqchip &&
+ if (e->type == KVM_IRQ_ROUTING_IRQCHIP &&
+ e->irqchip.irqchip == irqchip &&
e->irqchip.pin == pin) {
gsi = e->gsi;
break;
int delta;
e->gsi = ue->gsi;
+ e->type = ue->type;
switch (ue->type) {
case KVM_IRQ_ROUTING_IRQCHIP:
delta = 0;
projects / mv-sheeva.git / commitdiff