ARM: EXYNOS4: Add support for ORIGEN board

Insignal's ORIGEN board is based Samsung EXYNOS4210 SoC.

Signed-off-by: JeongHyeon Kim <jhkim@insignal.co.kr>
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
[kgene.kim@samsung.com: Fixed SoC name to EXYNOS4210]
[kgene.kim@samsung.com: Selected MACH_ORIGEN in exynos4_defconfig]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

diff --git a/arch/arm/configs/exynos4_defconfig b/arch/arm/configs/exynos4_defconfig
index da53ff3b4d708122668cf2a910ae0f72ce9f4746..cd40bb56e5686c58b5c2ad7beab4a2105842d897 100644 (file)
--- a/arch/arm/configs/exynos4_defconfig
+++ b/arch/arm/configs/exynos4_defconfig
@@ -11,6 +11,7 @@ CONFIG_MACH_SMDKV310=y
 CONFIG_MACH_ARMLEX4210=y
 CONFIG_MACH_UNIVERSAL_C210=y
 CONFIG_MACH_NURI=y
+CONFIG_MACH_ORIGEN=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_SMP=y

diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index 0c77ab99fa16a754794ece0407b4dae95ee114da..3ceefdbadd19e3d6315e70fc1d61ef1eef0a6530 100644 (file)
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -218,6 +218,16 @@ config MACH_NURI
        help
          Machine support for Samsung Mobile NURI Board.
 
+config MACH_ORIGEN
+       bool "ORIGEN"
+       select CPU_EXYNOS4210
+       select S3C_DEV_RTC
+       select S3C_DEV_WDT
+       select S3C_DEV_HSMMC2
+       select EXYNOS4_SETUP_SDHCI
+       help
+         Machine support for ORIGEN based on Samsung EXYNOS4210
+
 endmenu
 
 comment "Configuration for HSMMC bus width"

diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile
index b7fe1d7b0b1fb087f8813cbd8a4ba7cc0156686d..cbc9767014328d5dfff4cb0fa78dcc571d9c2d9b 100644 (file)
--- a/arch/arm/mach-exynos4/Makefile
+++ b/arch/arm/mach-exynos4/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_MACH_SMDKV310)           += mach-smdkv310.o
 obj-$(CONFIG_MACH_ARMLEX4210)          += mach-armlex4210.o
 obj-$(CONFIG_MACH_UNIVERSAL_C210)      += mach-universal_c210.o
 obj-$(CONFIG_MACH_NURI)                        += mach-nuri.o
+obj-$(CONFIG_MACH_ORIGEN)              += mach-origen.o
 
 # device support
 

diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c
new file mode 100644 (file)
index 0000000..ed59f86
--- /dev/null
+++ b/arch/arm/mach-exynos4/mach-origen.c
@@ -0,0 +1,108 @@
+/* linux/arch/arm/mach-exynos4/mach-origen.c
+ *
+ * Copyright (c) 2011 Insignal Co., Ltd.
+ *             http://www.insignal.co.kr/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/serial_core.h>
+#include <linux/gpio.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/input.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/exynos4.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/sdhci.h>
+#include <plat/iic.h>
+
+#include <mach/map.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define ORIGEN_UCON_DEFAULT    (S3C2410_UCON_TXILEVEL |        \
+                                S3C2410_UCON_RXILEVEL |        \
+                                S3C2410_UCON_TXIRQMODE |       \
+                                S3C2410_UCON_RXIRQMODE |       \
+                                S3C2410_UCON_RXFIFO_TOI |      \
+                                S3C2443_UCON_RXERR_IRQEN)
+
+#define ORIGEN_ULCON_DEFAULT   S3C2410_LCON_CS8
+
+#define ORIGEN_UFCON_DEFAULT   (S3C2410_UFCON_FIFOMODE |       \
+                                S5PV210_UFCON_TXTRIG4 |        \
+                                S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = {
+       [0] = {
+               .hwport         = 0,
+               .flags          = 0,
+               .ucon           = ORIGEN_UCON_DEFAULT,
+               .ulcon          = ORIGEN_ULCON_DEFAULT,
+               .ufcon          = ORIGEN_UFCON_DEFAULT,
+       },
+       [1] = {
+               .hwport         = 1,
+               .flags          = 0,
+               .ucon           = ORIGEN_UCON_DEFAULT,
+               .ulcon          = ORIGEN_ULCON_DEFAULT,
+               .ufcon          = ORIGEN_UFCON_DEFAULT,
+       },
+       [2] = {
+               .hwport         = 2,
+               .flags          = 0,
+               .ucon           = ORIGEN_UCON_DEFAULT,
+               .ulcon          = ORIGEN_ULCON_DEFAULT,
+               .ufcon          = ORIGEN_UFCON_DEFAULT,
+       },
+       [3] = {
+               .hwport         = 3,
+               .flags          = 0,
+               .ucon           = ORIGEN_UCON_DEFAULT,
+               .ulcon          = ORIGEN_ULCON_DEFAULT,
+               .ufcon          = ORIGEN_UFCON_DEFAULT,
+       },
+};
+
+static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = {
+       .cd_type                = S3C_SDHCI_CD_GPIO,
+       .ext_cd_gpio            = EXYNOS4_GPK2(2),
+       .ext_cd_gpio_invert     = 1,
+       .clk_type               = S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct platform_device *origen_devices[] __initdata = {
+       &s3c_device_hsmmc2,
+       &s3c_device_rtc,
+       &s3c_device_wdt,
+};
+
+static void __init origen_map_io(void)
+{
+       s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+       s3c24xx_init_clocks(24000000);
+       s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
+}
+
+static void __init origen_machine_init(void)
+{
+       s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata);
+       platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
+}
+
+MACHINE_START(ORIGEN, "ORIGEN")
+       /* Maintainer: JeongHyeon Kim <jhkim@insignal.co.kr> */
+       .boot_params    = S5P_PA_SDRAM + 0x100,
+       .init_irq       = exynos4_init_irq,
+       .map_io         = origen_map_io,
+       .init_machine   = origen_machine_init,
+       .timer          = &exynos4_timer,
+MACHINE_END