]> git.karo-electronics.de Git - linux-beck.git/commitdiff
drm: bridge: analogix/dp: add some rk3288 special registers setting
authorYakir Yang <ykk@rock-chips.com>
Mon, 15 Feb 2016 11:10:54 +0000 (19:10 +0800)
committerYakir Yang <ykk@rock-chips.com>
Tue, 5 Apr 2016 02:13:06 +0000 (10:13 +0800)
RK3288 need some special registers setting, we can separate
them out by the dev_type of plat_data.

Tested-by: Caesar Wang <wxt@rock-chips.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h

index 3858df5c687c7b16e18b6960666b8cbe6a5deebb..1e24b3722ff158cf6f4da3108c7a836d5920395e 100644 (file)
@@ -15,6 +15,8 @@
 #include <linux/delay.h>
 #include <linux/gpio.h>
 
+#include <drm/bridge/analogix_dp.h>
+
 #include "analogix_dp_core.h"
 #include "analogix_dp_reg.h"
 
@@ -72,6 +74,14 @@ void analogix_dp_init_analog_param(struct analogix_dp_device *dp)
        reg = SEL_24M | TX_DVDD_BIT_1_0625V;
        writel(reg, dp->reg_base + ANALOGIX_DP_ANALOG_CTL_2);
 
+       if (dp->plat_data && (dp->plat_data->dev_type == RK3288_DP)) {
+               writel(REF_CLK_24M, dp->reg_base + ANALOGIX_DP_PLL_REG_1);
+               writel(0x95, dp->reg_base + ANALOGIX_DP_PLL_REG_2);
+               writel(0x40, dp->reg_base + ANALOGIX_DP_PLL_REG_3);
+               writel(0x58, dp->reg_base + ANALOGIX_DP_PLL_REG_4);
+               writel(0x22, dp->reg_base + ANALOGIX_DP_PLL_REG_5);
+       }
+
        reg = DRIVE_DVDD_BIT_1_0625V | VCO_BIT_600_MICRO;
        writel(reg, dp->reg_base + ANALOGIX_DP_ANALOG_CTL_3);
 
@@ -206,81 +216,85 @@ void analogix_dp_set_analog_power_down(struct analogix_dp_device *dp,
                                       bool enable)
 {
        u32 reg;
+       u32 phy_pd_addr = ANALOGIX_DP_PHY_PD;
+
+       if (dp->plat_data && (dp->plat_data->dev_type == RK3288_DP))
+               phy_pd_addr = ANALOGIX_DP_PD;
 
        switch (block) {
        case AUX_BLOCK:
                if (enable) {
-                       reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+                       reg = readl(dp->reg_base + phy_pd_addr);
                        reg |= AUX_PD;
-                       writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+                       writel(reg, dp->reg_base + phy_pd_addr);
                } else {
-                       reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+                       reg = readl(dp->reg_base + phy_pd_addr);
                        reg &= ~AUX_PD;
-                       writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+                       writel(reg, dp->reg_base + phy_pd_addr);
                }
                break;
        case CH0_BLOCK:
                if (enable) {
-                       reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+                       reg = readl(dp->reg_base + phy_pd_addr);
                        reg |= CH0_PD;
-                       writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+                       writel(reg, dp->reg_base + phy_pd_addr);
                } else {
-                       reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+                       reg = readl(dp->reg_base + phy_pd_addr);
                        reg &= ~CH0_PD;
-                       writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+                       writel(reg, dp->reg_base + phy_pd_addr);
                }
                break;
        case CH1_BLOCK:
                if (enable) {
-                       reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+                       reg = readl(dp->reg_base + phy_pd_addr);
                        reg |= CH1_PD;
-                       writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+                       writel(reg, dp->reg_base + phy_pd_addr);
                } else {
-                       reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+                       reg = readl(dp->reg_base + phy_pd_addr);
                        reg &= ~CH1_PD;
-                       writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+                       writel(reg, dp->reg_base + phy_pd_addr);
                }
                break;
        case CH2_BLOCK:
                if (enable) {
-                       reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+                       reg = readl(dp->reg_base + phy_pd_addr);
                        reg |= CH2_PD;
-                       writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+                       writel(reg, dp->reg_base + phy_pd_addr);
                } else {
-                       reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+                       reg = readl(dp->reg_base + phy_pd_addr);
                        reg &= ~CH2_PD;
-                       writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+                       writel(reg, dp->reg_base + phy_pd_addr);
                }
                break;
        case CH3_BLOCK:
                if (enable) {
-                       reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+                       reg = readl(dp->reg_base + phy_pd_addr);
                        reg |= CH3_PD;
-                       writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+                       writel(reg, dp->reg_base + phy_pd_addr);
                } else {
-                       reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+                       reg = readl(dp->reg_base + phy_pd_addr);
                        reg &= ~CH3_PD;
-                       writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+                       writel(reg, dp->reg_base + phy_pd_addr);
                }
                break;
        case ANALOG_TOTAL:
                if (enable) {
-                       reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+                       reg = readl(dp->reg_base + phy_pd_addr);
                        reg |= DP_PHY_PD;
-                       writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+                       writel(reg, dp->reg_base + phy_pd_addr);
                } else {
-                       reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+                       reg = readl(dp->reg_base + phy_pd_addr);
                        reg &= ~DP_PHY_PD;
-                       writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+                       writel(reg, dp->reg_base + phy_pd_addr);
                }
                break;
        case POWER_ALL:
                if (enable) {
                        reg = DP_PHY_PD | AUX_PD | CH3_PD | CH2_PD |
                                CH1_PD | CH0_PD;
-                       writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+                       writel(reg, dp->reg_base + phy_pd_addr);
                } else {
-                       writel(0x00, dp->reg_base + ANALOGIX_DP_PHY_PD);
+                       writel(0x00, dp->reg_base + phy_pd_addr);
                }
                break;
        default:
@@ -399,8 +413,14 @@ void analogix_dp_init_aux(struct analogix_dp_device *dp)
        analogix_dp_reset_aux(dp);
 
        /* Disable AUX transaction H/W retry */
-       reg = AUX_BIT_PERIOD_EXPECTED_DELAY(3) | AUX_HW_RETRY_COUNT_SEL(0) |
-             AUX_HW_RETRY_INTERVAL_600_MICROSECONDS;
+       if (dp->plat_data && (dp->plat_data->dev_type == RK3288_DP))
+               reg = AUX_BIT_PERIOD_EXPECTED_DELAY(0) |
+                     AUX_HW_RETRY_COUNT_SEL(3) |
+                     AUX_HW_RETRY_INTERVAL_600_MICROSECONDS;
+       else
+               reg = AUX_BIT_PERIOD_EXPECTED_DELAY(3) |
+                     AUX_HW_RETRY_COUNT_SEL(0) |
+                     AUX_HW_RETRY_INTERVAL_600_MICROSECONDS;
        writel(reg, dp->reg_base + ANALOGIX_DP_AUX_HW_RETRY_CTL);
 
        /* Receive AUX Channel DEFER commands equal to DEFFER_COUNT*64 */
index 738db4c474a0e050b45a4c9eb66a37eaacdf1ff4..337912b0aeabc9382f9ffdbd546ecddba1b691da 100644 (file)
 #define ANALOGIX_DP_VIDEO_CTL_8                        0x3C
 #define ANALOGIX_DP_VIDEO_CTL_10               0x44
 
+#define ANALOGIX_DP_PLL_REG_1                  0xfc
+#define ANALOGIX_DP_PLL_REG_2                  0x9e4
+#define ANALOGIX_DP_PLL_REG_3                  0x9e8
+#define ANALOGIX_DP_PLL_REG_4                  0x9ec
+#define ANALOGIX_DP_PLL_REG_5                  0xa00
+
+#define ANALOGIX_DP_PD                         0x12c
+
 #define ANALOGIX_DP_LANE_MAP                   0x35C
 
 #define ANALOGIX_DP_ANALOG_CTL_1               0x370
 #define VSYNC_POLARITY_CFG                     (0x1 << 1)
 #define HSYNC_POLARITY_CFG                     (0x1 << 0)
 
+/* ANALOGIX_DP_PLL_REG_1 */
+#define REF_CLK_24M                            (0x1 << 1)
+#define REF_CLK_27M                            (0x0 << 1)
+
 /* ANALOGIX_DP_LANE_MAP */
 #define LANE3_MAP_LOGIC_LANE_0                 (0x0 << 6)
 #define LANE3_MAP_LOGIC_LANE_1                 (0x1 << 6)