module will be called ad9832.
config AD9834
- tristate "Analog Devices ad9833/4/ driver"
+ tristate "Analog Devices AD9833/4/7/8 driver"
depends on SPI
help
Say yes here to build support for Analog Devices DDS chip
- AD9833 and AD9834, provides direct access via sysfs.
+ AD9833, AD9834, AD9837 and AD9838, provides direct access via sysfs.
To compile this driver as a module, choose M here: the
module will be called ad9834.
/*
- * AD9834 SPI DAC driver
+ * AD9833/AD9834/AD9837/AD9838 SPI DDS driver
*
- * Copyright 2010 Analog Devices Inc.
+ * Copyright 2010-2011 Analog Devices Inc.
*
- * Licensed under the GPL-2 or later.
+ * Licensed under the GPL-2.
*/
#include <linux/interrupt.h>
(AD9834_FREQ_BITS / 2)) &
RES_MASK(AD9834_FREQ_BITS / 2)));
- return spi_sync(st->spi, &st->freq_msg);;
+ return spi_sync(st->spi, &st->freq_msg);
}
static int ad9834_write_phase(struct ad9834_state *st,
struct ad9834_state *st = dev_info->dev_data;
struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
int ret = 0;
- bool is_ad9833 = st->devid == ID_AD9833;
+ bool is_ad9833_7 = (st->devid == ID_AD9833) || (st->devid == ID_AD9837);
mutex_lock(&dev_info->mlock);
case 0:
if (sysfs_streq(buf, "sine")) {
st->control &= ~AD9834_MODE;
- if (is_ad9833)
+ if (is_ad9833_7)
st->control &= ~AD9834_OPBITEN;
} else if (sysfs_streq(buf, "triangle")) {
- if (is_ad9833) {
+ if (is_ad9833_7) {
st->control &= ~AD9834_OPBITEN;
st->control |= AD9834_MODE;
} else if (st->control & AD9834_OPBITEN) {
} else {
st->control |= AD9834_MODE;
}
- } else if (is_ad9833 && sysfs_streq(buf, "square")) {
+ } else if (is_ad9833_7 && sysfs_streq(buf, "square")) {
st->control &= ~AD9834_MODE;
st->control |= AD9834_OPBITEN;
} else {
struct ad9834_state *st = iio_dev_get_devdata(dev_info);
char *str;
- if (st->devid == ID_AD9833)
+ if ((st->devid == ID_AD9833) || (st->devid == ID_AD9837))
str = "sine triangle square";
else if (st->control & AD9834_OPBITEN)
str = "sine";
mode_t mode = attr->mode;
- if (st->devid == ID_AD9834)
- return mode;
-
- if ((attr == &iio_dev_attr_dds0_out1_enable.dev_attr.attr) ||
+ if (((st->devid == ID_AD9833) || (st->devid == ID_AD9837)) &&
+ ((attr == &iio_dev_attr_dds0_out1_enable.dev_attr.attr) ||
(attr == &iio_dev_attr_dds0_out1_wavetype.dev_attr.attr) ||
(attr ==
- &iio_dev_attr_dds0_out1_wavetype_available.dev_attr.attr))
+ &iio_dev_attr_dds0_out1_wavetype_available.dev_attr.attr) ||
+ (attr == &iio_dev_attr_dds0_pincontrol_en.dev_attr.attr)))
mode = 0;
return mode;
static const struct spi_device_id ad9834_id[] = {
{"ad9833", ID_AD9833},
{"ad9834", ID_AD9834},
+ {"ad9837", ID_AD9837},
+ {"ad9838", ID_AD9838},
{}
};
module_exit(ad9834_exit);
MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
-MODULE_DESCRIPTION("Analog Devices AD9833/AD9834 DDS");
+MODULE_DESCRIPTION("Analog Devices AD9833/AD9834/AD9837/AD9838 DDS");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("spi:ad9834");