#include "fc0012.h"
#include "fc0013.h"
-/* debug */
-static int dvb_usb_rtl28xxu_debug;
-module_param_named(debug, dvb_usb_rtl28xxu_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS);
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
static int rtl28xxu_ctrl_msg(struct dvb_usb_device *d, struct rtl28xxu_req *req)
if (ret > 0)
ret = 0;
- deb_dump(0, requesttype, req->value, req->index, buf, req->size,
- deb_xfer);
+ deb_dump(0, requesttype, req->value, req->index, buf, req->size);
/* read request, copy returned data to return buf */
if (!ret && requesttype == (USB_TYPE_VENDOR | USB_DIR_IN))
return ret;
err:
- deb_info("%s: failed=%d\n", __func__, ret);
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int rtl2831u_frontend_attach(struct dvb_usb_adapter *adap)
{
int ret;
- struct rtl28xxu_priv *priv = adap->dev->priv;
+ struct dvb_usb_device *d = adap_to_d(adap);
+ struct rtl28xxu_priv *priv = d_to_priv(d);
u8 buf[1];
struct rtl2830_config *rtl2830_config;
/* open RTL2831U/RTL2830 I2C gate */
/* for QT1010 tuner probe */
struct rtl28xxu_req req_qt1010 = { 0x0fc4, CMD_I2C_RD, 1, buf };
- deb_info("%s:\n", __func__);
+ dev_dbg(&d->udev->dev, "%s:\n", __func__);
/*
* RTL2831U GPIOs
*/
/* GPIO direction */
- ret = rtl28xx_wr_reg(adap->dev, SYS_GPIO_DIR, 0x0a);
+ ret = rtl28xx_wr_reg(d, SYS_GPIO_DIR, 0x0a);
if (ret)
goto err;
/* enable as output GPIO0, GPIO2, GPIO4 */
- ret = rtl28xx_wr_reg(adap->dev, SYS_GPIO_OUT_EN, 0x15);
+ ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_EN, 0x15);
if (ret)
goto err;
msleep(20);
/* open demod I2C gate */
- ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate);
+ ret = rtl28xxu_ctrl_msg(d, &req_gate);
if (ret)
goto err;
/* check QT1010 ID(?) register; reg=0f val=2c */
- ret = rtl28xxu_ctrl_msg(adap->dev, &req_qt1010);
+ ret = rtl28xxu_ctrl_msg(d, &req_qt1010);
if (ret == 0 && buf[0] == 0x2c) {
priv->tuner = TUNER_RTL2830_QT1010;
rtl2830_config = &rtl28xxu_rtl2830_qt1010_config;
- deb_info("%s: QT1010\n", __func__);
+ dev_dbg(&d->udev->dev, "%s: QT1010\n", __func__);
goto found;
} else {
- deb_info("%s: QT1010 probe failed=%d - %02x\n",
- __func__, ret, buf[0]);
+ dev_dbg(&d->udev->dev, "%s: QT1010 probe failed=%d - %02x\n",
+ __func__, ret, buf[0]);
}
/* open demod I2C gate */
- ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate);
+ ret = rtl28xxu_ctrl_msg(d, &req_gate);
if (ret)
goto err;
/* check MT2060 ID register; reg=00 val=63 */
- ret = rtl28xxu_ctrl_msg(adap->dev, &req_mt2060);
+ ret = rtl28xxu_ctrl_msg(d, &req_mt2060);
if (ret == 0 && buf[0] == 0x63) {
priv->tuner = TUNER_RTL2830_MT2060;
rtl2830_config = &rtl28xxu_rtl2830_mt2060_config;
- deb_info("%s: MT2060\n", __func__);
+ dev_dbg(&d->udev->dev, "%s: MT2060\n", __func__);
goto found;
} else {
- deb_info("%s: MT2060 probe failed=%d - %02x\n",
- __func__, ret, buf[0]);
+ dev_dbg(&d->udev->dev, "%s: MT2060 probe failed=%d - %02x\n",
+ __func__, ret, buf[0]);
}
/* assume MXL5005S */
ret = 0;
priv->tuner = TUNER_RTL2830_MXL5005S;
rtl2830_config = &rtl28xxu_rtl2830_mxl5005s_config;
- deb_info("%s: MXL5005S\n", __func__);
+ dev_dbg(&d->udev->dev, "%s: MXL5005S\n", __func__);
goto found;
found:
/* attach demodulator */
- adap->fe_adap[0].fe = dvb_attach(rtl2830_attach, rtl2830_config,
- &adap->dev->i2c_adap);
- if (adap->fe_adap[0].fe == NULL) {
+ adap->fe[0] = dvb_attach(rtl2830_attach, rtl2830_config,
+ &d->i2c_adap);
+ if (adap->fe[0] == NULL) {
ret = -ENODEV;
goto err;
}
return ret;
err:
- deb_info("%s: failed=%d\n", __func__, ret);
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
int ret;
u8 val;
- deb_info("%s cmd=%d arg=%d\n", __func__, cmd, arg);
+ dev_dbg(&d->udev->dev, "%s: cmd=%d arg=%d\n", __func__, cmd, arg);
+
switch (cmd) {
case FC_FE_CALLBACK_VHF_ENABLE:
/* set output values */
return 0;
err:
- err("%s: failed=%d\n", __func__, ret);
-
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
return -EINVAL;
}
-
-
-
static int rtl2832u_frontend_attach(struct dvb_usb_adapter *adap)
{
int ret;
- struct rtl28xxu_priv *priv = adap->dev->priv;
+ struct dvb_usb_device *d = adap_to_d(adap);
+ struct rtl28xxu_priv *priv = d_to_priv(d);
struct rtl2832_config *rtl2832_config;
-
u8 buf[2], val;
/* open RTL2832U/RTL2832 I2C gate */
struct rtl28xxu_req req_gate_open = {0x0120, 0x0011, 0x0001, "\x18"};
/* for TDA18272 tuner probe */
struct rtl28xxu_req req_tda18272 = {0x00c0, CMD_I2C_RD, 2, buf};
- deb_info("%s:\n", __func__);
+ dev_dbg(&d->udev->dev, "%s:\n", __func__);
-
- ret = rtl28xx_rd_reg(adap->dev, SYS_GPIO_DIR, &val);
+ ret = rtl28xx_rd_reg(d, SYS_GPIO_DIR, &val);
if (ret)
goto err;
val &= 0xbf;
- ret = rtl28xx_wr_reg(adap->dev, SYS_GPIO_DIR, val);
+ ret = rtl28xx_wr_reg(d, SYS_GPIO_DIR, val);
if (ret)
goto err;
-
/* enable as output GPIO3 and GPIO6*/
- ret = rtl28xx_rd_reg(adap->dev, SYS_GPIO_OUT_EN, &val);
+ ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_EN, &val);
if (ret)
goto err;
val |= 0x48;
- ret = rtl28xx_wr_reg(adap->dev, SYS_GPIO_OUT_EN, val);
+ ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_EN, val);
if (ret)
goto err;
-
-
/*
* Probe used tuner. We need to know used tuner before demod attach
* since there is some demod params needed to set according to tuner.
*/
/* open demod I2C gate */
- ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate_open);
+ ret = rtl28xxu_ctrl_msg(d, &req_gate_open);
if (ret)
goto err;
priv->tuner = TUNER_NONE;
/* check FC0012 ID register; reg=00 val=a1 */
- ret = rtl28xxu_ctrl_msg(adap->dev, &req_fc0012);
+ ret = rtl28xxu_ctrl_msg(d, &req_fc0012);
if (ret == 0 && buf[0] == 0xa1) {
priv->tuner = TUNER_RTL2832_FC0012;
rtl2832_config = &rtl28xxu_rtl2832_fc0012_config;
- info("%s: FC0012 tuner found", __func__);
+ dev_info(&d->udev->dev, "%s: FC0012 tuner found",
+ KBUILD_MODNAME);
goto found;
}
/* check FC0013 ID register; reg=00 val=a3 */
- ret = rtl28xxu_ctrl_msg(adap->dev, &req_fc0013);
+ ret = rtl28xxu_ctrl_msg(d, &req_fc0013);
if (ret == 0 && buf[0] == 0xa3) {
priv->tuner = TUNER_RTL2832_FC0013;
rtl2832_config = &rtl28xxu_rtl2832_fc0013_config;
- info("%s: FC0013 tuner found", __func__);
+ dev_info(&d->udev->dev, "%s: FC0013 tuner found",
+ KBUILD_MODNAME);
goto found;
}
/* check MT2266 ID register; reg=00 val=85 */
- ret = rtl28xxu_ctrl_msg(adap->dev, &req_mt2266);
+ ret = rtl28xxu_ctrl_msg(d, &req_mt2266);
if (ret == 0 && buf[0] == 0x85) {
priv->tuner = TUNER_RTL2832_MT2266;
/* TODO implement tuner */
- info("%s: MT2266 tuner found", __func__);
+ dev_info(&d->udev->dev, "%s: MT2266 tuner found",
+ KBUILD_MODNAME);
goto unsupported;
}
/* check FC2580 ID register; reg=01 val=56 */
- ret = rtl28xxu_ctrl_msg(adap->dev, &req_fc2580);
+ ret = rtl28xxu_ctrl_msg(d, &req_fc2580);
if (ret == 0 && buf[0] == 0x56) {
priv->tuner = TUNER_RTL2832_FC2580;
/* TODO implement tuner */
- info("%s: FC2580 tuner found", __func__);
+ dev_info(&d->udev->dev, "%s: FC2580 tuner found",
+ KBUILD_MODNAME);
goto unsupported;
}
/* check MT2063 ID register; reg=00 val=9e || 9c */
- ret = rtl28xxu_ctrl_msg(adap->dev, &req_mt2063);
+ ret = rtl28xxu_ctrl_msg(d, &req_mt2063);
if (ret == 0 && (buf[0] == 0x9e || buf[0] == 0x9c)) {
priv->tuner = TUNER_RTL2832_MT2063;
/* TODO implement tuner */
- info("%s: MT2063 tuner found", __func__);
+ dev_info(&d->udev->dev, "%s: MT2063 tuner found",
+ KBUILD_MODNAME);
goto unsupported;
}
/* check MAX3543 ID register; reg=00 val=38 */
- ret = rtl28xxu_ctrl_msg(adap->dev, &req_max3543);
+ ret = rtl28xxu_ctrl_msg(d, &req_max3543);
if (ret == 0 && buf[0] == 0x38) {
priv->tuner = TUNER_RTL2832_MAX3543;
/* TODO implement tuner */
- info("%s: MAX3534 tuner found", __func__);
+ dev_info(&d->udev->dev, "%s: MAX3534 tuner found",
+ KBUILD_MODNAME);
goto unsupported;
}
/* check TUA9001 ID register; reg=7e val=2328 */
- ret = rtl28xxu_ctrl_msg(adap->dev, &req_tua9001);
+ ret = rtl28xxu_ctrl_msg(d, &req_tua9001);
if (ret == 0 && buf[0] == 0x23 && buf[1] == 0x28) {
priv->tuner = TUNER_RTL2832_TUA9001;
/* TODO implement tuner */
- info("%s: TUA9001 tuner found", __func__);
+ dev_info(&d->udev->dev, "%s: TUA9001 tuner found",
+ KBUILD_MODNAME);
goto unsupported;
}
/* check MXL5007R ID register; reg=d9 val=14 */
- ret = rtl28xxu_ctrl_msg(adap->dev, &req_mxl5007t);
+ ret = rtl28xxu_ctrl_msg(d, &req_mxl5007t);
if (ret == 0 && buf[0] == 0x14) {
priv->tuner = TUNER_RTL2832_MXL5007T;
/* TODO implement tuner */
- info("%s: MXL5007T tuner found", __func__);
+ dev_info(&d->udev->dev, "%s: MXL5007T tuner found",
+ KBUILD_MODNAME);
goto unsupported;
}
/* check E4000 ID register; reg=02 val=40 */
- ret = rtl28xxu_ctrl_msg(adap->dev, &req_e4000);
+ ret = rtl28xxu_ctrl_msg(d, &req_e4000);
if (ret == 0 && buf[0] == 0x40) {
priv->tuner = TUNER_RTL2832_E4000;
/* TODO implement tuner */
- info("%s: E4000 tuner found", __func__);
+ dev_info(&d->udev->dev, "%s: E4000 tuner found",
+ KBUILD_MODNAME);
goto unsupported;
}
/* check TDA18272 ID register; reg=00 val=c760 */
- ret = rtl28xxu_ctrl_msg(adap->dev, &req_tda18272);
+ ret = rtl28xxu_ctrl_msg(d, &req_tda18272);
if (ret == 0 && (buf[0] == 0xc7 || buf[1] == 0x60)) {
priv->tuner = TUNER_RTL2832_TDA18272;
/* TODO implement tuner */
- info("%s: TDA18272 tuner found", __func__);
+ dev_info(&d->udev->dev, "%s: TDA18272 tuner found",
+ KBUILD_MODNAME);
goto unsupported;
}
unsupported:
/* close demod I2C gate */
- ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate_close);
+ ret = rtl28xxu_ctrl_msg(d, &req_gate_close);
if (ret)
goto err;
/* tuner not found */
- deb_info("No compatible tuner found");
+ dev_dbg(&d->udev->dev, "%s: No compatible tuner found\n", __func__);
ret = -ENODEV;
return ret;
found:
/* close demod I2C gate */
- ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate_close);
+ ret = rtl28xxu_ctrl_msg(d, &req_gate_close);
if (ret)
goto err;
/* attach demodulator */
- adap->fe_adap[0].fe = dvb_attach(rtl2832_attach, rtl2832_config,
- &adap->dev->i2c_adap);
- if (adap->fe_adap[0].fe == NULL) {
+ adap->fe[0] = dvb_attach(rtl2832_attach, rtl2832_config,
+ &d->i2c_adap);
+ if (adap->fe[0] == NULL) {
ret = -ENODEV;
goto err;
}
/* set fe callbacks */
- adap->fe_adap[0].fe->callback = rtl2832u_frontend_callback;
+ adap->fe[0]->callback = rtl2832u_frontend_callback;
return ret;
err:
- deb_info("%s: failed=%d\n", __func__, ret);
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int rtl2831u_tuner_attach(struct dvb_usb_adapter *adap)
{
int ret;
- struct rtl28xxu_priv *priv = adap->dev->priv;
+ struct dvb_usb_device *d = adap_to_d(adap);
+ struct rtl28xxu_priv *priv = d_to_priv(d);
struct i2c_adapter *rtl2830_tuner_i2c;
struct dvb_frontend *fe;
- deb_info("%s:\n", __func__);
+ dev_dbg(&d->udev->dev, "%s:\n", __func__);
/* use rtl2830 driver I2C adapter, for more info see rtl2830 driver */
- rtl2830_tuner_i2c = rtl2830_get_tuner_i2c_adapter(adap->fe_adap[0].fe);
+ rtl2830_tuner_i2c = rtl2830_get_tuner_i2c_adapter(adap->fe[0]);
switch (priv->tuner) {
case TUNER_RTL2830_QT1010:
- fe = dvb_attach(qt1010_attach, adap->fe_adap[0].fe,
+ fe = dvb_attach(qt1010_attach, adap->fe[0],
rtl2830_tuner_i2c, &rtl28xxu_qt1010_config);
break;
case TUNER_RTL2830_MT2060:
- fe = dvb_attach(mt2060_attach, adap->fe_adap[0].fe,
+ fe = dvb_attach(mt2060_attach, adap->fe[0],
rtl2830_tuner_i2c, &rtl28xxu_mt2060_config,
1220);
break;
case TUNER_RTL2830_MXL5005S:
- fe = dvb_attach(mxl5005s_attach, adap->fe_adap[0].fe,
+ fe = dvb_attach(mxl5005s_attach, adap->fe[0],
rtl2830_tuner_i2c, &rtl28xxu_mxl5005s_config);
break;
default:
fe = NULL;
- err("unknown tuner=%d", priv->tuner);
+ dev_err(&d->udev->dev, "%s: unknown tuner=%d\n", KBUILD_MODNAME,
+ priv->tuner);
}
if (fe == NULL) {
return 0;
err:
- deb_info("%s: failed=%d\n", __func__, ret);
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap)
{
int ret;
- struct rtl28xxu_priv *priv = adap->dev->priv;
+ struct dvb_usb_device *d = adap_to_d(adap);
+ struct rtl28xxu_priv *priv = d_to_priv(d);
struct dvb_frontend *fe;
- deb_info("%s:\n", __func__);
+ dev_dbg(&d->udev->dev, "%s:\n", __func__);
switch (priv->tuner) {
case TUNER_RTL2832_FC0012:
- fe = dvb_attach(fc0012_attach, adap->fe_adap[0].fe,
- &adap->dev->i2c_adap, 0xc6>>1, 0, FC_XTAL_28_8_MHZ);
+ fe = dvb_attach(fc0012_attach, adap->fe[0],
+ &d->i2c_adap, 0xc6>>1, 0, FC_XTAL_28_8_MHZ);
/* since fc0012 includs reading the signal strength delegate
* that to the tuner driver */
- adap->fe_adap[0].fe->ops.read_signal_strength = adap->fe_adap[0].
- fe->ops.tuner_ops.get_rf_strength;
+ adap->fe[0]->ops.read_signal_strength =
+ adap->fe[0]->ops.tuner_ops.get_rf_strength;
return 0;
break;
case TUNER_RTL2832_FC0013:
- fe = dvb_attach(fc0013_attach, adap->fe_adap[0].fe,
- &adap->dev->i2c_adap, 0xc6>>1, 0, FC_XTAL_28_8_MHZ);
+ fe = dvb_attach(fc0013_attach, adap->fe[0],
+ &d->i2c_adap, 0xc6>>1, 0, FC_XTAL_28_8_MHZ);
/* fc0013 also supports signal strength reading */
- adap->fe_adap[0].fe->ops.read_signal_strength = adap->fe_adap[0]
- .fe->ops.tuner_ops.get_rf_strength;
+ adap->fe[0]->ops.read_signal_strength =
+ adap->fe[0]->ops.tuner_ops.get_rf_strength;
return 0;
default:
fe = NULL;
- err("unknown tuner=%d", priv->tuner);
+ dev_err(&d->udev->dev, "%s: unknown tuner=%d\n", KBUILD_MODNAME,
+ priv->tuner);
}
if (fe == NULL) {
return 0;
err:
- deb_info("%s: failed=%d\n", __func__, ret);
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
-static int rtl2831u_streaming_ctrl(struct dvb_usb_adapter *adap , int onoff)
+static int rtl28xxu_init(struct dvb_usb_device *d)
+{
+ int ret;
+ u8 val;
+
+ dev_dbg(&d->udev->dev, "%s:\n", __func__);
+
+ /* init USB endpoints */
+ ret = rtl28xx_rd_reg(d, USB_SYSCTL_0, &val);
+ if (ret)
+ goto err;
+
+ /* enable DMA and Full Packet Mode*/
+ val |= 0x09;
+ ret = rtl28xx_wr_reg(d, USB_SYSCTL_0, val);
+ if (ret)
+ goto err;
+
+ /* set EPA maximum packet size to 0x0200 */
+ ret = rtl28xx_wr_regs(d, USB_EPA_MAXPKT, "\x00\x02\x00\x00", 4);
+ if (ret)
+ goto err;
+
+ /* change EPA FIFO length */
+ ret = rtl28xx_wr_regs(d, USB_EPA_FIFO_CFG, "\x14\x00\x00\x00", 4);
+ if (ret)
+ goto err;
+
+ return ret;
+err:
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+ return ret;
+}
+
+static int rtl2831u_streaming_ctrl(struct dvb_frontend *fe , int onoff)
{
int ret;
u8 buf[2], gpio;
+ struct dvb_usb_device *d = fe_to_d(fe);
- deb_info("%s: onoff=%d\n", __func__, onoff);
+ dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff);
- ret = rtl28xx_rd_reg(adap->dev, SYS_GPIO_OUT_VAL, &gpio);
+ ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_VAL, &gpio);
if (ret)
goto err;
gpio &= (~0x04); /* LED off */
}
- ret = rtl28xx_wr_reg(adap->dev, SYS_GPIO_OUT_VAL, gpio);
+ ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_VAL, gpio);
if (ret)
goto err;
- ret = rtl28xx_wr_regs(adap->dev, USB_EPA_CTL, buf, 2);
+ ret = rtl28xx_wr_regs(d, USB_EPA_CTL, buf, 2);
if (ret)
goto err;
return ret;
err:
- deb_info("%s: failed=%d\n", __func__, ret);
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
-static int rtl2832u_streaming_ctrl(struct dvb_usb_adapter *adap , int onoff)
+static int rtl2832u_streaming_ctrl(struct dvb_frontend *fe , int onoff)
{
int ret;
u8 buf[2];
+ struct dvb_usb_device *d = fe_to_d(fe);
- deb_info("%s: onoff=%d\n", __func__, onoff);
-
+ dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff);
if (onoff) {
buf[0] = 0x00;
buf[1] = 0x02; /* reset EPA */
}
- ret = rtl28xx_wr_regs(adap->dev, USB_EPA_CTL, buf, 2);
+ ret = rtl28xx_wr_regs(d, USB_EPA_CTL, buf, 2);
if (ret)
goto err;
return ret;
err:
- deb_info("%s: failed=%d\n", __func__, ret);
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
int ret;
u8 gpio, sys0;
- deb_info("%s: onoff=%d\n", __func__, onoff);
+ dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff);
/* demod adc */
ret = rtl28xx_rd_reg(d, SYS_SYS0, &sys0);
if (ret)
goto err;
- deb_info("%s: RD SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__, sys0, gpio);
+ dev_dbg(&d->udev->dev, "%s: RD SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__,
+ sys0, gpio);
if (onoff) {
gpio |= 0x01; /* GPIO0 = 1 */
sys0 = sys0 & (~0xc0);
}
- deb_info("%s: WR SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__, sys0, gpio);
+ dev_dbg(&d->udev->dev, "%s: WR SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__,
+ sys0, gpio);
/* demod adc */
ret = rtl28xx_wr_reg(d, SYS_SYS0, sys0);
return ret;
err:
- deb_info("%s: failed=%d\n", __func__, ret);
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
int ret;
u8 val;
- deb_info("%s: onoff=%d\n", __func__, onoff);
+ dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff);
if (onoff) {
/* set output values */
return ret;
err:
- deb_info("%s: failed=%d\n", __func__, ret);
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
return ret;
err:
- deb_info("%s: failed=%d\n", __func__, ret);
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
+static int rtl2831u_get_rc_config(struct dvb_usb_device *d,
+ struct dvb_usb_rc *rc)
+{
+ rc->map_name = RC_MAP_EMPTY;
+ rc->allowed_protos = RC_TYPE_NEC;
+ rc->query = rtl2831u_rc_query;
+ rc->interval = 400;
+
+ return 0;
+}
+
static int rtl2832u_rc_query(struct dvb_usb_device *d)
{
int ret, i;
exit:
return ret;
err:
- deb_info("%s: failed=%d\n", __func__, ret);
+ dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
-enum rtl28xxu_usb_table_entry {
- RTL2831U_0BDA_2831,
- RTL2831U_14AA_0160,
- RTL2831U_14AA_0161,
- RTL2832U_0CCD_00A9,
- RTL2832U_1F4D_B803,
- RTL2832U_0CCD_00B3,
-};
-
-static struct usb_device_id rtl28xxu_table[] = {
- /* RTL2831U */
- [RTL2831U_0BDA_2831] = {
- USB_DEVICE(USB_VID_REALTEK, USB_PID_REALTEK_RTL2831U)},
- [RTL2831U_14AA_0160] = {
- USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT)},
- [RTL2831U_14AA_0161] = {
- USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT_2)},
-
- /* RTL2832U */
- [RTL2832U_0CCD_00A9] = {
- USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_BLACK_REV1)},
- [RTL2832U_1F4D_B803] = {
- USB_DEVICE(USB_VID_GTEK, USB_PID_DELOCK_USB2_DVBT)},
- [RTL2832U_0CCD_00B3] = {
- USB_DEVICE(USB_VID_TERRATEC, USB_PID_NOXON_DAB_STICK)},
- {} /* terminating entry */
-};
-
-MODULE_DEVICE_TABLE(usb, rtl28xxu_table);
-
-static struct dvb_usb_device_properties rtl28xxu_properties[] = {
- {
- .caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
- .usb_ctrl = DEVICE_SPECIFIC,
- .no_reconnect = 1,
-
- .size_of_priv = sizeof(struct rtl28xxu_priv),
-
- .num_adapters = 1,
- .adapter = {
- {
- .num_frontends = 1,
- .fe = {
- {
- .frontend_attach = rtl2831u_frontend_attach,
- .tuner_attach = rtl2831u_tuner_attach,
- .streaming_ctrl = rtl2831u_streaming_ctrl,
- .stream = {
- .type = USB_BULK,
- .count = 6,
- .endpoint = 0x81,
- .u = {
- .bulk = {
- .buffersize = 8*512,
- }
- }
- }
- }
- }
- }
- },
+static int rtl2832u_get_rc_config(struct dvb_usb_device *d,
+ struct dvb_usb_rc *rc)
+{
+ rc->map_name = RC_MAP_EMPTY;
+ rc->allowed_protos = RC_TYPE_NEC;
+ rc->query = rtl2832u_rc_query;
+ rc->interval = 400;
- .power_ctrl = rtl2831u_power_ctrl,
+ return 0;
+}
- .rc.core = {
- .protocol = RC_TYPE_NEC,
- .module_name = "rtl28xxu",
- .rc_query = rtl2831u_rc_query,
- .rc_interval = 400,
- .allowed_protos = RC_TYPE_NEC,
- .rc_codes = RC_MAP_EMPTY,
+static const struct dvb_usb_device_properties rtl2831u_props = {
+ .driver_name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ .adapter_nr = adapter_nr,
+ .size_of_priv = sizeof(struct rtl28xxu_priv),
+
+ .power_ctrl = rtl2831u_power_ctrl,
+ .i2c_algo = &rtl28xxu_i2c_algo,
+ .frontend_attach = rtl2831u_frontend_attach,
+ .tuner_attach = rtl2831u_tuner_attach,
+ .init = rtl28xxu_init,
+ .get_rc_config = rtl2831u_get_rc_config,
+ .streaming_ctrl = rtl2831u_streaming_ctrl,
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .stream = DVB_USB_STREAM_BULK(0x81, 6, 8 * 512),
},
-
- .i2c_algo = &rtl28xxu_i2c_algo,
-
- .num_device_descs = 2,
- .devices = {
- {
- .name = "Realtek RTL2831U reference design",
- .warm_ids = {
- &rtl28xxu_table[RTL2831U_0BDA_2831],
- },
- },
- {
- .name = "Freecom USB2.0 DVB-T",
- .warm_ids = {
- &rtl28xxu_table[RTL2831U_14AA_0160],
- &rtl28xxu_table[RTL2831U_14AA_0161],
- },
- },
- }
},
- {
- .caps = DVB_USB_IS_AN_I2C_ADAPTER,
-
- .usb_ctrl = DEVICE_SPECIFIC,
- .no_reconnect = 1,
-
- .size_of_priv = sizeof(struct rtl28xxu_priv),
-
- .num_adapters = 1,
- .adapter = {
- {
- .num_frontends = 1,
- .fe = {
- {
- .frontend_attach = rtl2832u_frontend_attach,
- .tuner_attach = rtl2832u_tuner_attach,
- .streaming_ctrl = rtl2832u_streaming_ctrl,
- .stream = {
- .type = USB_BULK,
- .count = 6,
- .endpoint = 0x81,
- .u = {
- .bulk = {
- .buffersize = 8*512,
- }
- }
- }
- }
- }
- }
- },
-
- .power_ctrl = rtl2832u_power_ctrl,
+};
- .rc.core = {
- .protocol = RC_TYPE_NEC,
- .module_name = "rtl28xxu",
- .rc_query = rtl2832u_rc_query,
- .rc_interval = 400,
- .allowed_protos = RC_TYPE_NEC,
- .rc_codes = RC_MAP_EMPTY,
+static const struct dvb_usb_device_properties rtl2832u_props = {
+ .driver_name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ .adapter_nr = adapter_nr,
+ .size_of_priv = sizeof(struct rtl28xxu_priv),
+
+ .power_ctrl = rtl2832u_power_ctrl,
+ .i2c_algo = &rtl28xxu_i2c_algo,
+ .frontend_attach = rtl2832u_frontend_attach,
+ .tuner_attach = rtl2832u_tuner_attach,
+ .init = rtl28xxu_init,
+ .get_rc_config = rtl2832u_get_rc_config,
+ .streaming_ctrl = rtl2832u_streaming_ctrl,
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .stream = DVB_USB_STREAM_BULK(0x81, 6, 8 * 512),
},
-
- .i2c_algo = &rtl28xxu_i2c_algo,
-
- .num_device_descs = 3,
- .devices = {
- {
- .name = "Terratec Cinergy T Stick Black",
- .warm_ids = {
- &rtl28xxu_table[RTL2832U_0CCD_00A9],
- },
- },
- {
- .name = "G-Tek Electronics Group Lifeview LV5TDLX DVB-T",
- .warm_ids = {
- &rtl28xxu_table[RTL2832U_1F4D_B803],
- },
- },
- {
- .name = "NOXON DAB/DAB+ USB dongle",
- .warm_ids = {
- &rtl28xxu_table[RTL2832U_0CCD_00B3],
- },
- },
- }
},
-
};
-static int rtl28xxu_probe(struct usb_interface *intf,
- const struct usb_device_id *id)
-{
- int ret, i;
- u8 val;
- int properties_count = ARRAY_SIZE(rtl28xxu_properties);
- struct dvb_usb_device *d;
- struct usb_device *udev;
- bool found;
-
- deb_info("%s: interface=%d\n", __func__,
- intf->cur_altsetting->desc.bInterfaceNumber);
-
- if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
- return 0;
-
- /* Dynamic USB ID support. Replaces first device ID with current one .*/
- udev = interface_to_usbdev(intf);
-
- for (i = 0, found = false; i < ARRAY_SIZE(rtl28xxu_table) - 1; i++) {
- if (rtl28xxu_table[i].idVendor ==
- le16_to_cpu(udev->descriptor.idVendor) &&
- rtl28xxu_table[i].idProduct ==
- le16_to_cpu(udev->descriptor.idProduct)) {
- found = true;
- break;
- }
- }
-
- if (!found) {
- deb_info("%s: using dynamic ID %04x:%04x\n", __func__,
- le16_to_cpu(udev->descriptor.idVendor),
- le16_to_cpu(udev->descriptor.idProduct));
- rtl28xxu_properties[0].devices[0].warm_ids[0]->idVendor =
- le16_to_cpu(udev->descriptor.idVendor);
- rtl28xxu_properties[0].devices[0].warm_ids[0]->idProduct =
- le16_to_cpu(udev->descriptor.idProduct);
- }
-
- for (i = 0; i < properties_count; i++) {
- ret = dvb_usb_device_init(intf, &rtl28xxu_properties[i],
- THIS_MODULE, &d, adapter_nr);
- if (ret == 0 || ret != -ENODEV)
- break;
- }
-
- if (ret)
- goto err;
-
-
- /* init USB endpoints */
- ret = rtl28xx_rd_reg(d, USB_SYSCTL_0, &val);
- if (ret)
- goto err;
-
- /* enable DMA and Full Packet Mode*/
- val |= 0x09;
- ret = rtl28xx_wr_reg(d, USB_SYSCTL_0, val);
- if (ret)
- goto err;
-
- /* set EPA maximum packet size to 0x0200 */
- ret = rtl28xx_wr_regs(d, USB_EPA_MAXPKT, "\x00\x02\x00\x00", 4);
- if (ret)
- goto err;
-
- /* change EPA FIFO length */
- ret = rtl28xx_wr_regs(d, USB_EPA_FIFO_CFG, "\x14\x00\x00\x00", 4);
- if (ret)
- goto err;
-
- return ret;
-err:
- deb_info("%s: failed=%d\n", __func__, ret);
- return ret;
-}
-
-static struct usb_driver rtl28xxu_driver = {
- .name = "dvb_usb_rtl28xxu",
- .probe = rtl28xxu_probe,
- .disconnect = dvb_usb_device_exit,
- .id_table = rtl28xxu_table,
+static const struct usb_device_id rtl28xxu_id_table[] = {
+ { DVB_USB_DEVICE(USB_VID_REALTEK, USB_PID_REALTEK_RTL2831U,
+ &rtl2831u_props, "Realtek RTL2831U reference design", NULL) },
+ { DVB_USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT,
+ &rtl2831u_props, "Freecom USB2.0 DVB-T", NULL) },
+ { DVB_USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT_2,
+ &rtl2831u_props, "Freecom USB2.0 DVB-T", NULL) },
+
+ { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_BLACK_REV1,
+ &rtl2832u_props, "Terratec Cinergy T Stick Black", NULL) },
+ { DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_DELOCK_USB2_DVBT,
+ &rtl2832u_props, "G-Tek Electronics Group Lifeview LV5TDLX DVB-T", NULL) },
+ { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_NOXON_DAB_STICK,
+ &rtl2832u_props, "NOXON DAB/DAB+ USB dongle", NULL) },
+ { }
+};
+MODULE_DEVICE_TABLE(usb, rtl28xxu_id_table);
+
+static struct usb_driver rtl28xxu_usb_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = rtl28xxu_id_table,
+ .probe = dvb_usbv2_probe,
+ .disconnect = dvb_usbv2_disconnect,
+ .suspend = dvb_usbv2_suspend,
+ .resume = dvb_usbv2_resume,
+ .no_dynamic_id = 1,
+ .soft_unbind = 1,
};
-/* module stuff */
-static int __init rtl28xxu_module_init(void)
-{
- int ret;
-
- deb_info("%s:\n", __func__);
-
- ret = usb_register(&rtl28xxu_driver);
- if (ret)
- err("usb_register failed=%d", ret);
-
- return ret;
-}
-
-static void __exit rtl28xxu_module_exit(void)
-{
- deb_info("%s:\n", __func__);
-
- /* deregister this driver from the USB subsystem */
- usb_deregister(&rtl28xxu_driver);
-}
-
-module_init(rtl28xxu_module_init);
-module_exit(rtl28xxu_module_exit);
+module_usb_driver(rtl28xxu_usb_driver);
MODULE_DESCRIPTION("Realtek RTL28xxU DVB USB driver");
MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
projects / linux-beck.git / commitdiff