skb->protocol = eth_type_trans(skb, skb->dev);
if ((netdev->features & NETIF_F_RXCSUM) &&
- (rh->r_dh.csum_verified & CNNIC_CSUM_VERIFIED))
+ (((rh->r_dh.encap_on) &&
+ (rh->r_dh.csum_verified & CNNIC_TUN_CSUM_VERIFIED)) ||
+ (!(rh->r_dh.encap_on) &&
+ (rh->r_dh.csum_verified & CNNIC_CSUM_VERIFIED))))
/* checksum has already been verified */
skb->ip_summed = CHECKSUM_UNNECESSARY;
else
skb->ip_summed = CHECKSUM_NONE;
+ /* Setting Encapsulation field on basis of status received
+ * from the firmware
+ */
+ if (rh->r_dh.encap_on) {
+ skb->encapsulation = 1;
+ skb->csum_level = 1;
+ droq->stats.rx_vxlan++;
+ }
+
/* inbound VLAN tag */
if ((netdev->features & NETIF_F_HW_VLAN_CTAG_RX) &&
rh->r_dh.vlan) {
cmdsetup.u64 = 0;
cmdsetup.s.iq_no = iq_no;
- if (skb->ip_summed == CHECKSUM_PARTIAL)
- cmdsetup.s.transport_csum = 1;
+ if (skb->ip_summed == CHECKSUM_PARTIAL) {
+ if (skb->encapsulation) {
+ cmdsetup.s.tnl_csum = 1;
+ stats->tx_vxlan++;
+ } else {
+ cmdsetup.s.transport_csum = 1;
+ }
+ }
if (!skb_shinfo(skb)->nr_frags) {
cmdsetup.s.u.datasize = skb->len;
return ret;
}
+/** Sending command to add/delete VxLAN UDP port to firmware
+ * @param netdev pointer to network device
+ * @param command OCTNET_CMD_VXLAN_PORT_CONFIG
+ * @param vxlan_port VxLAN port to be added or deleted
+ * @param vxlan_cmd_bit OCTNET_CMD_VXLAN_PORT_ADD,
+ * OCTNET_CMD_VXLAN_PORT_DEL
+ * @returns SUCCESS or FAILURE
+ */
+static int liquidio_vxlan_port_command(struct net_device *netdev, int command,
+ u16 vxlan_port, u8 vxlan_cmd_bit)
+{
+ struct lio *lio = GET_LIO(netdev);
+ struct octeon_device *oct = lio->oct_dev;
+ struct octnic_ctrl_pkt nctrl;
+ int ret = 0;
+
+ nctrl.ncmd.u64 = 0;
+ nctrl.ncmd.s.cmd = command;
+ nctrl.ncmd.s.more = vxlan_cmd_bit;
+ nctrl.ncmd.s.param1 = vxlan_port;
+ nctrl.iq_no = lio->linfo.txpciq[0].s.q_no;
+ nctrl.wait_time = 100;
+ nctrl.netpndev = (u64)netdev;
+ nctrl.cb_fn = liquidio_link_ctrl_cmd_completion;
+
+ ret = octnet_send_nic_ctrl_pkt(lio->oct_dev, &nctrl);
+ if (ret < 0) {
+ dev_err(&oct->pci_dev->dev,
+ "DEVFLAGS VxLAN port add/delete failed in core (ret : 0x%x)\n",
+ ret);
+ }
+ return ret;
+}
+
/** \brief Net device fix features
* @param netdev pointer to network device
* @param request features requested
return 0;
}
+static void liquidio_add_vxlan_port(struct net_device *netdev,
+ struct udp_tunnel_info *ti)
+{
+ if (ti->type != UDP_TUNNEL_TYPE_VXLAN)
+ return;
+
+ liquidio_vxlan_port_command(netdev,
+ OCTNET_CMD_VXLAN_PORT_CONFIG,
+ htons(ti->port),
+ OCTNET_CMD_VXLAN_PORT_ADD);
+}
+
+static void liquidio_del_vxlan_port(struct net_device *netdev,
+ struct udp_tunnel_info *ti)
+{
+ if (ti->type != UDP_TUNNEL_TYPE_VXLAN)
+ return;
+
+ liquidio_vxlan_port_command(netdev,
+ OCTNET_CMD_VXLAN_PORT_CONFIG,
+ htons(ti->port),
+ OCTNET_CMD_VXLAN_PORT_DEL);
+}
+
static const struct net_device_ops lionetdevops = {
.ndo_open = liquidio_open,
.ndo_stop = liquidio_stop,
.ndo_change_mtu = liquidio_change_mtu,
.ndo_fix_features = liquidio_fix_features,
.ndo_set_features = liquidio_set_features,
+ .ndo_udp_tunnel_add = liquidio_add_vxlan_port,
+ .ndo_udp_tunnel_del = liquidio_del_vxlan_port,
.ndo_select_queue = select_q,
};
| NETIF_F_LRO;
netif_set_gso_max_size(netdev, OCTNIC_GSO_MAX_SIZE);
+ /* Copy of transmit encapsulation capabilities:
+ * TSO, TSO6, Checksums for this device
+ */
+ lio->enc_dev_capability = NETIF_F_IP_CSUM
+ | NETIF_F_IPV6_CSUM
+ | NETIF_F_GSO_UDP_TUNNEL
+ | NETIF_F_HW_CSUM | NETIF_F_SG
+ | NETIF_F_RXCSUM
+ | NETIF_F_TSO | NETIF_F_TSO6
+ | NETIF_F_LRO;
+
+ netdev->hw_enc_features =
+ (lio->enc_dev_capability & ~NETIF_F_LRO);
netdev->vlan_features = lio->dev_capability;
/* Add any unchangeable hw features */
lio->dev_capability |= NETIF_F_HW_VLAN_CTAG_FILTER |