]> git.karo-electronics.de Git - linux-beck.git/commitdiff
ARM: dts: imx6: Add support for imx6q dmo edmqmx6
authorSilvio F <silvio.fricke@gmail.com>
Thu, 7 Nov 2013 13:54:27 +0000 (14:54 +0100)
committerShawn Guo <shawn.guo@linaro.org>
Sun, 9 Feb 2014 13:29:01 +0000 (21:29 +0800)
Signed-off-by: Silvio F <silvio.fricke@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
arch/arm/boot/dts/Makefile
arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts [new file with mode: 0644]

index 5672e91bada8a8b1a1df6d5bf1fdb9e29c77946d..61011400ff6d161315e82195161e24804baaa85c 100644 (file)
@@ -164,6 +164,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
        imx6q-arm2.dtb \
        imx6q-cm-fx6.dtb \
        imx6q-cubox-i.dtb \
+       imx6q-dmo-edmqmx6.dtb \
        imx6q-gw51xx.dtb \
        imx6q-gw52xx.dtb \
        imx6q-gw53xx.dtb \
diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
new file mode 100644 (file)
index 0000000..a63bbb3
--- /dev/null
@@ -0,0 +1,372 @@
+/*
+ * Copyright 2013 Data Modul AG
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6q.dtsi"
+
+/ {
+       model = "Data Modul eDM-QMX6 Board";
+       compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q";
+
+       aliases {
+               gpio7 = &stmpe_gpio;
+       };
+
+       memory {
+               reg = <0x10000000 0x80000000>;
+       };
+
+       regulators {
+               compatible = "simple-bus";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               reg_3p3v: regulator@0 {
+                       compatible = "regulator-fixed";
+                       reg = <0>;
+                       regulator-name = "3P3V";
+                       regulator-min-microvolt = <3300000>;
+                       regulator-max-microvolt = <3300000>;
+                       regulator-always-on;
+               };
+
+               reg_usb_otg_vbus: regulator@1 {
+                       compatible = "regulator-fixed";
+                       reg = <1>;
+                       regulator-name = "usb_otg_vbus";
+                       regulator-min-microvolt = <5000000>;
+                       regulator-max-microvolt = <5000000>;
+                       gpio = <&gpio7 12 0>;
+               };
+
+               reg_usb_host1: regulator@2 {
+                       compatible = "regulator-fixed";
+                       reg = <2>;
+                       regulator-name = "usb_host1_en";
+                       regulator-min-microvolt = <3300000>;
+                       regulator-max-microvolt = <3300000>;
+                       gpio = <&gpio3 31 0>;
+                       enable-active-high;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               led-blue {
+                       label = "blue";
+                       gpios = <&stmpe_gpio 8 GPIO_ACTIVE_HIGH>;
+                       linux,default-trigger = "heartbeat";
+               };
+
+               led-green {
+                       label = "green";
+                       gpios = <&stmpe_gpio 9 GPIO_ACTIVE_HIGH>;
+               };
+
+               led-pink {
+                       label = "pink";
+                       gpios = <&stmpe_gpio 10 GPIO_ACTIVE_HIGH>;
+               };
+
+               led-red {
+                       label = "red";
+                       gpios = <&stmpe_gpio 11 GPIO_ACTIVE_HIGH>;
+               };
+       };
+};
+
+&fec {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_enet>;
+       phy-mode = "rgmii";
+       phy-reset-gpios = <&gpio3 23 0>;
+       phy-supply = <&vgen2_1v2_eth>;
+       status = "okay";
+};
+
+&i2c2 {
+       clock-frequency = <100000>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_i2c2
+                    &pinctrl_stmpe>;
+       status = "okay";
+
+       pmic: pfuze100@08 {
+               compatible = "fsl,pfuze100";
+               reg = <0x08>;
+               interrupt-parent = <&gpio3>;
+               interrupts = <20 8>;
+
+               regulators {
+                       sw1a_reg: sw1ab {
+                               regulator-min-microvolt = <300000>;
+                               regulator-max-microvolt = <1875000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       sw1c_reg: sw1c {
+                               regulator-min-microvolt = <300000>;
+                               regulator-max-microvolt = <1875000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       sw2_reg: sw2 {
+                               regulator-min-microvolt = <800000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       sw3a_reg: sw3a {
+                               regulator-min-microvolt = <400000>;
+                               regulator-max-microvolt = <1975000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       sw3b_reg: sw3b {
+                               regulator-min-microvolt = <400000>;
+                               regulator-max-microvolt = <1975000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       sw4_reg: sw4 {
+                               regulator-min-microvolt = <400000>;
+                               regulator-max-microvolt = <1975000>;
+                               regulator-always-on;
+                       };
+
+                       swbst_reg: swbst {
+                               regulator-min-microvolt = <5000000>;
+                               regulator-max-microvolt = <5150000>;
+                               regulator-always-on;
+                       };
+
+                       snvs_reg: vsnvs {
+                               regulator-min-microvolt = <1000000>;
+                               regulator-max-microvolt = <3000000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       vref_reg: vrefddr {
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       vgen1_reg: vgen1 {
+                               regulator-min-microvolt = <800000>;
+                               regulator-max-microvolt = <1550000>;
+                       };
+
+                       vgen2_1v2_eth: vgen2 {
+                               regulator-min-microvolt = <800000>;
+                               regulator-max-microvolt = <1550000>;
+                       };
+
+                       vdd_high_in: vgen3 {
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       vgen4_reg: vgen4 {
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-always-on;
+                       };
+
+                       vgen5_reg: vgen5 {
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-always-on;
+                       };
+
+                       vgen6_reg: vgen6 {
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-always-on;
+                       };
+               };
+       };
+
+       stmpe: stmpe1601@40 {
+               compatible = "st,stmpe1601";
+               reg = <0x40>;
+               interrupts = <30 0>;
+               interrupt-parent = <&gpio3>;
+
+               stmpe_gpio: stmpe_gpio {
+                       #gpio-cells = <2>;
+                       compatible = "st,stmpe-gpio";
+               };
+       };
+
+       temp1: ad7414@4c {
+               compatible = "ad,ad7414";
+               reg = <0x4c>;
+       };
+
+       temp2: ad7414@4d {
+               compatible = "ad,ad7414";
+               reg = <0x4d>;
+       };
+
+       rtc: m41t62@68 {
+               compatible = "stm,m41t62";
+               reg = <0x68>;
+       };
+};
+
+&iomuxc {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_hog>;
+
+       imx6q-dmo-edmqmx6 {
+               pinctrl_hog: hoggrp {
+                       fsl,pins = <
+                               MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x80000000
+                               MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x80000000
+                       >;
+               };
+
+               pinctrl_enet: enetgrp {
+                       fsl,pins = <
+                               MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b0b0
+                               MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b0b0
+                               MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b0b0
+                               MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b0b0
+                               MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b0b0
+                               MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b0b0
+                               MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b0b0
+                               MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b0b0
+                               MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b0b0
+                               MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b0b0
+                               MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b0b0
+                               MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b0b0
+                               MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x1b0b0
+                               MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
+                               MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
+                               MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
+                       >;
+               };
+
+               pinctrl_i2c2: i2c2grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_EIM_EB2__I2C2_SCL            0x4001b8b1
+                               MX6QDL_PAD_KEY_ROW3__I2C2_SDA           0x4001b8b1
+                       >;
+               };
+
+               pinctrl_stmpe: stmpegrp {
+                       fsl,pins = <MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x80000000>;
+               };
+
+               pinctrl_uart1: uart1grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA      0x1b0b1
+                               MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA      0x1b0b1
+                       >;
+               };
+
+               pinctrl_uart2: uart2grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_EIM_D26__UART2_TX_DATA       0x1b0b1
+                               MX6QDL_PAD_EIM_D27__UART2_RX_DATA       0x1b0b1
+                       >;
+               };
+
+               pinctrl_usbotg: usbotggrp {
+                       fsl,pins = <
+                               MX6QDL_PAD_GPIO_1__USB_OTG_ID           0x17059
+                       >;
+               };
+
+               pinctrl_usdhc3: usdhc3grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_SD3_CMD__SD3_CMD             0x17059
+                               MX6QDL_PAD_SD3_CLK__SD3_CLK             0x10059
+                               MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x17059
+                               MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17059
+                               MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17059
+                               MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17059
+                       >;
+               };
+
+               pinctrl_usdhc4: usdhc4grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_SD4_CMD__SD4_CMD             0x17059
+                               MX6QDL_PAD_SD4_CLK__SD4_CLK             0x10059
+                               MX6QDL_PAD_SD4_DAT0__SD4_DATA0          0x17059
+                               MX6QDL_PAD_SD4_DAT1__SD4_DATA1          0x17059
+                               MX6QDL_PAD_SD4_DAT2__SD4_DATA2          0x17059
+                               MX6QDL_PAD_SD4_DAT3__SD4_DATA3          0x17059
+                               MX6QDL_PAD_SD4_DAT4__SD4_DATA4          0x17059
+                               MX6QDL_PAD_SD4_DAT5__SD4_DATA5          0x17059
+                               MX6QDL_PAD_SD4_DAT6__SD4_DATA6          0x17059
+                               MX6QDL_PAD_SD4_DAT7__SD4_DATA7          0x17059
+                       >;
+               };
+       };
+};
+
+&sata {
+       status = "okay";
+};
+
+&uart1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart1>;
+       status = "okay";
+};
+
+&uart2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart2>;
+       status = "okay";
+};
+
+&usbh1 {
+       vbus-supply = <&reg_usb_host1>;
+       disable-over-current;
+       status = "okay";
+};
+
+&usbotg {
+       vbus-supply = <&reg_usb_otg_vbus>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usbotg>;
+       disable-over-current;
+       status = "okay";
+};
+
+&usdhc3 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usdhc3>;
+       vmmc-supply = <&reg_3p3v>;
+       status = "okay";
+};
+
+&usdhc4 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usdhc4>;
+       vmmc-supply = <&reg_3p3v>;
+       non-removable;
+       bus-width = <8>;
+       status = "okay";
+};