- Caches, MMUs
The MMU must be off.
Instruction cache may be on or off.
- Data cache must be off and invalidated.
- External caches (if present) must be configured and disabled.
+ The address range corresponding to the loaded kernel image must be
+ cleaned to the PoC. In the presence of a system cache or other
+ coherent masters with caches enabled, this will typically require
+ cache maintenance by VA rather than set/way operations.
+ System caches which respect the architected cache maintenance by VA
+ operations must be configured and may be enabled.
+ System caches which do not respect architected cache maintenance by VA
+ operations (not recommended) must be configured and disabled.
- Architected timers
CNTFRQ must be programmed with the timer frequency and CNTVOFF must
#include <asm/assembler.h>
#include <asm/ptrace.h>
#include <asm/asm-offsets.h>
+#include <asm/cache.h>
#include <asm/cputype.h>
#include <asm/memory.h>
#include <asm/thread_info.h>
cmp w20, #BOOT_CPU_MODE_EL2
b.ne 1f
add x1, x1, #4
-1: str w20, [x1] // This CPU has booted in EL1
+1: dc cvac, x1 // Clean potentially dirty cache line
+ dsb sy
+ str w20, [x1] // This CPU has booted in EL1
+ dc civac, x1 // Clean&invalidate potentially stale cache line
+ dsb sy
ret
ENDPROC(set_cpu_boot_mode_flag)
* This is not in .bss, because we set it sufficiently early that the boot-time
* zeroing of .bss would clobber it.
*/
- .pushsection .data
+ .pushsection .data..cacheline_aligned
ENTRY(__boot_cpu_mode)
+ .align L1_CACHE_SHIFT
.long BOOT_CPU_MODE_EL2
.long 0
.popsection
*/
__create_page_tables:
pgtbl x25, x26, x24 // idmap_pg_dir and swapper_pg_dir addresses
+ mov x27, lr
+
+ /*
+ * Invalidate the idmap and swapper page tables to avoid potential
+ * dirty cache lines being evicted.
+ */
+ mov x0, x25
+ add x1, x26, #SWAPPER_DIR_SIZE
+ bl __inval_cache_range
/*
* Clear the idmap and swapper page tables.
add x0, x26, #2 * PAGE_SIZE // section table address
create_pgd_entry x26, x0, x5, x6, x7
#endif
+
+ /*
+ * Since the page tables have been populated with non-cacheable
+ * accesses (MMU disabled), invalidate the idmap and swapper page
+ * tables again to remove any speculatively loaded cache lines.
+ */
+ mov x0, x25
+ add x1, x26, #SWAPPER_DIR_SIZE
+ bl __inval_cache_range
+
+ mov lr, x27
ret
ENDPROC(__create_page_tables)
.ltorg
ret
ENDPROC(__flush_dcache_area)
+/*
+ * __inval_cache_range(start, end)
+ * - start - start address of region
+ * - end - end address of region
+ */
+ENTRY(__inval_cache_range)
+ /* FALLTHROUGH */
+
/*
* __dma_inv_range(start, end)
* - start - virtual start address of region
b.lo 1b
dsb sy
ret
+ENDPROC(__inval_cache_range)
ENDPROC(__dma_inv_range)
/*