#define BOARD_READY 1
static void hpsa_drain_commands(struct ctlr_info *h);
static void hpsa_flush_cache(struct ctlr_info *h);
+static int hpsa_scsi_ioaccel_queue_command(struct ctlr_info *h,
+ struct CommandList *c, u32 ioaccel_handle, u8 *cdb, int cdb_len,
+ u8 *scsi3addr);
static inline struct ctlr_info *sdev_to_hba(struct scsi_device *sdev)
{
return a;
}
+/*
+ * There are some special bits in the bus address of the
+ * command that we have to set for the controller to know
+ * how to process the command:
+ *
+ * Normal performant mode:
+ * bit 0: 1 means performant mode, 0 means simple mode.
+ * bits 1-3 = block fetch table entry
+ * bits 4-6 = command type (== 0)
+ *
+ * ioaccel1 mode:
+ * bit 0 = "performant mode" bit.
+ * bits 1-3 = block fetch table entry
+ * bits 4-6 = command type (== 110)
+ * (command type is needed because ioaccel1 mode
+ * commands are submitted through the same register as normal
+ * mode commands, so this is how the controller knows whether
+ * the command is normal mode or ioaccel1 mode.)
+ *
+ * ioaccel2 mode:
+ * bit 0 = "performant mode" bit.
+ * bits 1-4 = block fetch table entry (note extra bit)
+ * bits 4-6 = not needed, because ioaccel2 mode has
+ * a separate special register for submitting commands.
+ */
+
/* set_performant_mode: Modify the tag for cciss performant
* set bit 0 for pull model, bits 3-1 for block fetch
* register number
}
}
+static void set_ioaccel1_performant_mode(struct ctlr_info *h,
+ struct CommandList *c)
+{
+ struct io_accel1_cmd *cp = &h->ioaccel_cmd_pool[c->cmdindex];
+
+ /* Tell the controller to post the reply to the queue for this
+ * processor. This seems to give the best I/O throughput.
+ */
+ cp->ReplyQueue = smp_processor_id() % h->nreply_queues;
+ /* Set the bits in the address sent down to include:
+ * - performant mode bit (bit 0)
+ * - pull count (bits 1-3)
+ * - command type (bits 4-6)
+ */
+ c->busaddr |= 1 | (h->ioaccel1_blockFetchTable[c->Header.SGList] << 1) |
+ IOACCEL1_BUSADDR_CMDTYPE;
+}
+
+static void set_ioaccel2_performant_mode(struct ctlr_info *h,
+ struct CommandList *c)
+{
+ struct io_accel2_cmd *cp = &h->ioaccel2_cmd_pool[c->cmdindex];
+
+ /* Tell the controller to post the reply to the queue for this
+ * processor. This seems to give the best I/O throughput.
+ */
+ cp->reply_queue = smp_processor_id() % h->nreply_queues;
+ /* Set the bits in the address sent down to include:
+ * - performant mode bit not used in ioaccel mode 2
+ * - pull count (bits 0-3)
+ * - command type isn't needed for ioaccel2
+ */
+ c->busaddr |= (h->ioaccel2_blockFetchTable[cp->sg_count]);
+}
+
static int is_firmware_flash_cmd(u8 *cdb)
{
return cdb[0] == BMIC_WRITE && cdb[6] == BMIC_FLASH_FIRMWARE;
{
unsigned long flags;
- set_performant_mode(h, c);
+ switch (c->cmd_type) {
+ case CMD_IOACCEL1:
+ set_ioaccel1_performant_mode(h, c);
+ break;
+ case CMD_IOACCEL2:
+ set_ioaccel2_performant_mode(h, c);
+ break;
+ default:
+ set_performant_mode(h, c);
+ }
dial_down_lockup_detection_during_fw_flash(h, c);
spin_lock_irqsave(&h->lock, flags);
addQ(&h->reqQ, c);
pci_unmap_single(h->pdev, temp64.val, chain_sg->Len, PCI_DMA_TODEVICE);
}
+static void handle_ioaccel_mode2_error(struct ctlr_info *h,
+ struct CommandList *c,
+ struct scsi_cmnd *cmd,
+ struct io_accel2_cmd *c2)
+{
+ int data_len;
+
+ switch (c2->error_data.serv_response) {
+ case IOACCEL2_SERV_RESPONSE_COMPLETE:
+ switch (c2->error_data.status) {
+ case IOACCEL2_STATUS_SR_TASK_COMP_GOOD:
+ break;
+ case IOACCEL2_STATUS_SR_TASK_COMP_CHK_COND:
+ dev_warn(&h->pdev->dev,
+ "%s: task complete with check condition.\n",
+ "HP SSD Smart Path");
+ if (c2->error_data.data_present !=
+ IOACCEL2_SENSE_DATA_PRESENT)
+ break;
+ /* copy the sense data */
+ data_len = c2->error_data.sense_data_len;
+ if (data_len > SCSI_SENSE_BUFFERSIZE)
+ data_len = SCSI_SENSE_BUFFERSIZE;
+ if (data_len > sizeof(c2->error_data.sense_data_buff))
+ data_len =
+ sizeof(c2->error_data.sense_data_buff);
+ memcpy(cmd->sense_buffer,
+ c2->error_data.sense_data_buff, data_len);
+ cmd->result |= SAM_STAT_CHECK_CONDITION;
+ break;
+ case IOACCEL2_STATUS_SR_TASK_COMP_BUSY:
+ dev_warn(&h->pdev->dev,
+ "%s: task complete with BUSY status.\n",
+ "HP SSD Smart Path");
+ break;
+ case IOACCEL2_STATUS_SR_TASK_COMP_RES_CON:
+ dev_warn(&h->pdev->dev,
+ "%s: task complete with reservation conflict.\n",
+ "HP SSD Smart Path");
+ break;
+ case IOACCEL2_STATUS_SR_TASK_COMP_SET_FULL:
+ /* Make scsi midlayer do unlimited retries */
+ cmd->result = DID_IMM_RETRY << 16;
+ break;
+ case IOACCEL2_STATUS_SR_TASK_COMP_ABORTED:
+ dev_warn(&h->pdev->dev,
+ "%s: task complete with aborted status.\n",
+ "HP SSD Smart Path");
+ break;
+ default:
+ dev_warn(&h->pdev->dev,
+ "%s: task complete with unrecognized status: 0x%02x\n",
+ "HP SSD Smart Path", c2->error_data.status);
+ break;
+ }
+ break;
+ case IOACCEL2_SERV_RESPONSE_FAILURE:
+ /* don't expect to get here. */
+ dev_warn(&h->pdev->dev,
+ "unexpected delivery or target failure, status = 0x%02x\n",
+ c2->error_data.status);
+ break;
+ case IOACCEL2_SERV_RESPONSE_TMF_COMPLETE:
+ break;
+ case IOACCEL2_SERV_RESPONSE_TMF_SUCCESS:
+ break;
+ case IOACCEL2_SERV_RESPONSE_TMF_REJECTED:
+ dev_warn(&h->pdev->dev, "task management function rejected.\n");
+ break;
+ case IOACCEL2_SERV_RESPONSE_TMF_WRONG_LUN:
+ dev_warn(&h->pdev->dev, "task management function invalid LUN\n");
+ break;
+ default:
+ dev_warn(&h->pdev->dev,
+ "%s: Unrecognized server response: 0x%02x\n",
+ "HP SSD Smart Path", c2->error_data.serv_response);
+ break;
+ }
+}
+
+static void process_ioaccel2_completion(struct ctlr_info *h,
+ struct CommandList *c, struct scsi_cmnd *cmd,
+ struct hpsa_scsi_dev_t *dev)
+{
+ struct io_accel2_cmd *c2 = &h->ioaccel2_cmd_pool[c->cmdindex];
+
+ /* check for good status */
+ if (likely(c2->error_data.serv_response == 0 &&
+ c2->error_data.status == 0)) {
+ cmd_free(h, c);
+ cmd->scsi_done(cmd);
+ return;
+ }
+
+ /* Any RAID offload error results in retry which will use
+ * the normal I/O path so the controller can handle whatever's
+ * wrong.
+ */
+ if (is_logical_dev_addr_mode(dev->scsi3addr) &&
+ c2->error_data.serv_response ==
+ IOACCEL2_SERV_RESPONSE_FAILURE) {
+ if (c2->error_data.status !=
+ IOACCEL2_STATUS_SR_IOACCEL_DISABLED)
+ dev_warn(&h->pdev->dev,
+ "%s: Error 0x%02x, Retrying on standard path.\n",
+ "HP SSD Smart Path", c2->error_data.status);
+ dev->offload_enabled = 0;
+ cmd->result = DID_SOFT_ERROR << 16;
+ cmd_free(h, c);
+ cmd->scsi_done(cmd);
+ return;
+ }
+ handle_ioaccel_mode2_error(h, c, cmd, c2);
+ cmd_free(h, c);
+ cmd->scsi_done(cmd);
+}
+
static void complete_scsi_command(struct CommandList *cp)
{
struct scsi_cmnd *cmd;
cmd->result = (DID_OK << 16); /* host byte */
cmd->result |= (COMMAND_COMPLETE << 8); /* msg byte */
+
+ if (cp->cmd_type == CMD_IOACCEL2)
+ return process_ioaccel2_completion(h, cp, cmd, dev);
+
cmd->result |= ei->ScsiStatus;
/* copy the sense data whether we need to or not. */
return 0;
}
-/*
- * Queue a command to the I/O accelerator path.
- */
-static int hpsa_scsi_ioaccel_queue_command(struct ctlr_info *h,
+static int hpsa_scsi_ioaccel1_queue_command(struct ctlr_info *h,
struct CommandList *c, u32 ioaccel_handle, u8 *cdb, int cdb_len,
u8 *scsi3addr)
{
control |= IOACCEL1_CONTROL_NODATAXFER;
}
+ c->Header.SGList = use_sg;
/* Fill out the command structure to submit */
cp->dev_handle = ioaccel_handle & 0xFFFF;
cp->transfer_len = total_len;
cp->control = control;
memcpy(cp->CDB, cdb, cdb_len);
memcpy(cp->CISS_LUN, scsi3addr, 8);
-
- /* Tell the controller to post the reply to the queue for this
- * processor. This seems to give the best I/O throughput.
- */
- cp->ReplyQueue = smp_processor_id() % h->nreply_queues;
-
- /* Set the bits in the address sent down to include:
- * - performant mode bit (bit 0)
- * - pull count (bits 1-3)
- * - command type (bits 4-6)
- */
- c->busaddr |= 1 | (h->ioaccel1_blockFetchTable[use_sg] << 1) |
- IOACCEL1_BUSADDR_CMDTYPE;
+ /* Tag was already set at init time. */
enqueue_cmd_and_start_io(h, c);
return 0;
}
cmd->cmnd, cmd->cmd_len, dev->scsi3addr);
}
+static int hpsa_scsi_ioaccel2_queue_command(struct ctlr_info *h,
+ struct CommandList *c, u32 ioaccel_handle, u8 *cdb, int cdb_len,
+ u8 *scsi3addr)
+{
+ struct scsi_cmnd *cmd = c->scsi_cmd;
+ struct io_accel2_cmd *cp = &h->ioaccel2_cmd_pool[c->cmdindex];
+ struct ioaccel2_sg_element *curr_sg;
+ int use_sg, i;
+ struct scatterlist *sg;
+ u64 addr64;
+ u32 len;
+ u32 total_len = 0;
+
+ if (scsi_sg_count(cmd) > h->ioaccel_maxsg)
+ return IO_ACCEL_INELIGIBLE;
+
+ if (fixup_ioaccel_cdb(cdb, &cdb_len))
+ return IO_ACCEL_INELIGIBLE;
+ c->cmd_type = CMD_IOACCEL2;
+ /* Adjust the DMA address to point to the accelerated command buffer */
+ c->busaddr = (u32) h->ioaccel2_cmd_pool_dhandle +
+ (c->cmdindex * sizeof(*cp));
+ BUG_ON(c->busaddr & 0x0000007F);
+
+ memset(cp, 0, sizeof(*cp));
+ cp->IU_type = IOACCEL2_IU_TYPE;
+
+ use_sg = scsi_dma_map(cmd);
+ if (use_sg < 0)
+ return use_sg;
+
+ if (use_sg) {
+ BUG_ON(use_sg > IOACCEL2_MAXSGENTRIES);
+ curr_sg = cp->sg;
+ scsi_for_each_sg(cmd, sg, use_sg, i) {
+ addr64 = (u64) sg_dma_address(sg);
+ len = sg_dma_len(sg);
+ total_len += len;
+ curr_sg->address = cpu_to_le64(addr64);
+ curr_sg->length = cpu_to_le32(len);
+ curr_sg->reserved[0] = 0;
+ curr_sg->reserved[1] = 0;
+ curr_sg->reserved[2] = 0;
+ curr_sg->chain_indicator = 0;
+ curr_sg++;
+ }
+
+ switch (cmd->sc_data_direction) {
+ case DMA_TO_DEVICE:
+ cp->direction = IOACCEL2_DIR_DATA_OUT;
+ break;
+ case DMA_FROM_DEVICE:
+ cp->direction = IOACCEL2_DIR_DATA_IN;
+ break;
+ case DMA_NONE:
+ cp->direction = IOACCEL2_DIR_NO_DATA;
+ break;
+ default:
+ dev_err(&h->pdev->dev, "unknown data direction: %d\n",
+ cmd->sc_data_direction);
+ BUG();
+ break;
+ }
+ } else {
+ cp->direction = IOACCEL2_DIR_NO_DATA;
+ }
+ cp->scsi_nexus = ioaccel_handle;
+ cp->Tag.lower = (c->cmdindex << DIRECT_LOOKUP_SHIFT) |
+ DIRECT_LOOKUP_BIT;
+ memcpy(cp->cdb, cdb, sizeof(cp->cdb));
+ memset(cp->cciss_lun, 0, sizeof(cp->cciss_lun));
+ cp->cmd_priority_task_attr = 0;
+
+ /* fill in sg elements */
+ cp->sg_count = (u8) use_sg;
+
+ cp->data_len = cpu_to_le32(total_len);
+ cp->err_ptr = cpu_to_le64(c->busaddr +
+ offsetof(struct io_accel2_cmd, error_data));
+ cp->err_len = cpu_to_le32((u32) sizeof(cp->error_data));
+
+ enqueue_cmd_and_start_io(h, c);
+ return 0;
+}
+
+/*
+ * Queue a command to the correct I/O accelerator path.
+ */
+static int hpsa_scsi_ioaccel_queue_command(struct ctlr_info *h,
+ struct CommandList *c, u32 ioaccel_handle, u8 *cdb, int cdb_len,
+ u8 *scsi3addr)
+{
+ if (h->transMethod & CFGTBL_Trans_io_accel1)
+ return hpsa_scsi_ioaccel1_queue_command(h, c, ioaccel_handle,
+ cdb, cdb_len, scsi3addr);
+ else
+ return hpsa_scsi_ioaccel2_queue_command(h, c, ioaccel_handle,
+ cdb, cdb_len, scsi3addr);
+}
+
/*
* Attempt to perform offload RAID mapping for a logical volume I/O.
*/
spin_unlock_irqrestore(&h->lock, flags);
dial_up_lockup_detection_on_fw_flash_complete(c->h, c);
- if (likely(c->cmd_type == CMD_IOACCEL1 || c->cmd_type == CMD_SCSI))
+ if (likely(c->cmd_type == CMD_IOACCEL1 || c->cmd_type == CMD_SCSI
+ || c->cmd_type == CMD_IOACCEL2))
complete_scsi_command(c);
else if (c->cmd_type == CMD_IOCTL_PEND)
complete(c->waiting);
access = SA5_ioaccel_mode1_access;
writel(10, &h->cfgtable->HostWrite.CoalIntDelay);
writel(4, &h->cfgtable->HostWrite.CoalIntCount);
+ } else {
+ if (trans_support & CFGTBL_Trans_io_accel2) {
+ access = SA5_ioaccel_mode2_access;
+ writel(10, &h->cfgtable->HostWrite.CoalIntDelay);
+ writel(4, &h->cfgtable->HostWrite.CoalIntCount);
+ }
}
writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
hpsa_wait_for_mode_change_ack(h);
projects / linux-beck.git / commitdiff