config MACH_SMDKC210
bool "SMDKC210"
- select CPU_EXYNOS4210
- select S5P_DEV_FIMD0
- select S3C_DEV_RTC
- select S3C_DEV_WDT
- select S3C_DEV_I2C1
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_HSMMC2
- select S3C_DEV_HSMMC3
- select SAMSUNG_DEV_PWM
- select SAMSUNG_DEV_BACKLIGHT
- select EXYNOS4_DEV_PD
- select EXYNOS4_DEV_SYSMMU
- select EXYNOS4_SETUP_FIMD0
- select EXYNOS4_SETUP_I2C1
- select EXYNOS4_SETUP_SDHCI
+ select MACH_SMDKV310
help
Machine support for Samsung SMDKC210
# machine support
-obj-$(CONFIG_MACH_SMDKC210) += mach-smdkc210.o
+obj-$(CONFIG_MACH_SMDKC210) += mach-smdkv310.o
obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o
obj-$(CONFIG_MACH_ARMLEX4210) += mach-armlex4210.o
obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/mach-smdkc210.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/serial_core.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/lcd.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-#include <linux/smsc911x.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/pwm_backlight.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <video/platform_lcd.h>
-
-#include <plat/regs-serial.h>
-#include <plat/regs-srom.h>
-#include <plat/regs-fb-v4.h>
-#include <plat/exynos4.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
-#include <plat/sdhci.h>
-#include <plat/iic.h>
-#include <plat/pd.h>
-#include <plat/gpio-cfg.h>
-#include <plat/backlight.h>
-
-#include <mach/map.h>
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define SMDKC210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
- S3C2410_UCON_RXILEVEL | \
- S3C2410_UCON_TXIRQMODE | \
- S3C2410_UCON_RXIRQMODE | \
- S3C2410_UCON_RXFIFO_TOI | \
- S3C2443_UCON_RXERR_IRQEN)
-
-#define SMDKC210_ULCON_DEFAULT S3C2410_LCON_CS8
-
-#define SMDKC210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
- S5PV210_UFCON_TXTRIG4 | \
- S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg smdkc210_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = SMDKC210_UCON_DEFAULT,
- .ulcon = SMDKC210_ULCON_DEFAULT,
- .ufcon = SMDKC210_UFCON_DEFAULT,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = SMDKC210_UCON_DEFAULT,
- .ulcon = SMDKC210_ULCON_DEFAULT,
- .ufcon = SMDKC210_UFCON_DEFAULT,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = SMDKC210_UCON_DEFAULT,
- .ulcon = SMDKC210_ULCON_DEFAULT,
- .ufcon = SMDKC210_UFCON_DEFAULT,
- },
- [3] = {
- .hwport = 3,
- .flags = 0,
- .ucon = SMDKC210_UCON_DEFAULT,
- .ulcon = SMDKC210_ULCON_DEFAULT,
- .ufcon = SMDKC210_UFCON_DEFAULT,
- },
-};
-
-static struct s3c_sdhci_platdata smdkc210_hsmmc0_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_GPIO,
- .ext_cd_gpio = EXYNOS4_GPK0(2),
- .ext_cd_gpio_invert = 1,
- .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT
- .max_width = 8,
- .host_caps = MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdkc210_hsmmc1_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_GPIO,
- .ext_cd_gpio = EXYNOS4_GPK0(2),
- .ext_cd_gpio_invert = 1,
- .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-static struct s3c_sdhci_platdata smdkc210_hsmmc2_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_GPIO,
- .ext_cd_gpio = EXYNOS4_GPK2(2),
- .ext_cd_gpio_invert = 1,
- .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
- .max_width = 8,
- .host_caps = MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdkc210_hsmmc3_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_GPIO,
- .ext_cd_gpio = EXYNOS4_GPK2(2),
- .ext_cd_gpio_invert = 1,
- .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-static void lcd_lte480wv_set_power(struct plat_lcd_data *pd,
- unsigned int power)
-{
- if (power) {
-#if !defined(CONFIG_BACKLIGHT_PWM)
- gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_HIGH, "GPD0");
- gpio_free(EXYNOS4_GPD0(1));
-#endif
- /* fire nRESET on power up */
- gpio_request(EXYNOS4_GPX0(6), "GPX0");
-
- gpio_direction_output(EXYNOS4_GPX0(6), 1);
- mdelay(100);
-
- gpio_set_value(EXYNOS4_GPX0(6), 0);
- mdelay(10);
-
- gpio_set_value(EXYNOS4_GPX0(6), 1);
- mdelay(10);
-
- gpio_free(EXYNOS4_GPX0(6));
- } else {
-#if !defined(CONFIG_BACKLIGHT_PWM)
- gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_LOW, "GPD0");
- gpio_free(EXYNOS4_GPD0(1));
-#endif
- }
-}
-
-static struct plat_lcd_data smdkc210_lcd_lte480wv_data = {
- .set_power = lcd_lte480wv_set_power,
-};
-
-static struct platform_device smdkc210_lcd_lte480wv = {
- .name = "platform-lcd",
- .dev.parent = &s5p_device_fimd0.dev,
- .dev.platform_data = &smdkc210_lcd_lte480wv_data,
-};
-
-static struct s3c_fb_pd_win smdkc210_fb_win0 = {
- .win_mode = {
- .left_margin = 13,
- .right_margin = 8,
- .upper_margin = 7,
- .lower_margin = 5,
- .hsync_len = 3,
- .vsync_len = 1,
- .xres = 800,
- .yres = 480,
- },
- .max_bpp = 32,
- .default_bpp = 24,
-};
-
-static struct s3c_fb_platdata smdkc210_lcd0_pdata __initdata = {
- .win[0] = &smdkc210_fb_win0,
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
- .setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
-};
-
-static struct resource smdkc210_smsc911x_resources[] = {
- [0] = {
- .start = EXYNOS4_PA_SROM_BANK(1),
- .end = EXYNOS4_PA_SROM_BANK(1) + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_EINT(5),
- .end = IRQ_EINT(5),
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct smsc911x_platform_config smsc9215_config = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
- .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
-};
-
-static struct platform_device smdkc210_smsc911x = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smdkc210_smsc911x_resources),
- .resource = smdkc210_smsc911x_resources,
- .dev = {
- .platform_data = &smsc9215_config,
- },
-};
-
-static struct i2c_board_info i2c_devs1[] __initdata = {
- {I2C_BOARD_INFO("wm8994", 0x1a),},
-};
-
-static struct platform_device *smdkc210_devices[] __initdata = {
- &s3c_device_hsmmc0,
- &s3c_device_hsmmc1,
- &s3c_device_hsmmc2,
- &s3c_device_hsmmc3,
- &s3c_device_i2c1,
- &s3c_device_rtc,
- &s3c_device_wdt,
- &exynos4_device_ac97,
- &exynos4_device_i2s0,
- &exynos4_device_pd[PD_MFC],
- &exynos4_device_pd[PD_G3D],
- &exynos4_device_pd[PD_LCD0],
- &exynos4_device_pd[PD_LCD1],
- &exynos4_device_pd[PD_CAM],
- &exynos4_device_pd[PD_TV],
- &exynos4_device_pd[PD_GPS],
- &exynos4_device_sysmmu,
- &samsung_asoc_dma,
- &s5p_device_fimd0,
- &smdkc210_lcd_lte480wv,
- &smdkc210_smsc911x,
-};
-
-static void __init smdkc210_smsc911x_init(void)
-{
- u32 cs1;
-
- /* configure nCS1 width to 16 bits */
- cs1 = __raw_readl(S5P_SROM_BW) &
- ~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT);
- cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) |
- (1 << S5P_SROM_BW__WAITENABLE__SHIFT) |
- (1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) <<
- S5P_SROM_BW__NCS1__SHIFT;
- __raw_writel(cs1, S5P_SROM_BW);
-
- /* set timing for nCS1 suitable for ethernet chip */
- __raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) |
- (0x9 << S5P_SROM_BCX__TACP__SHIFT) |
- (0xc << S5P_SROM_BCX__TCAH__SHIFT) |
- (0x1 << S5P_SROM_BCX__TCOH__SHIFT) |
- (0x6 << S5P_SROM_BCX__TACC__SHIFT) |
- (0x1 << S5P_SROM_BCX__TCOS__SHIFT) |
- (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1);
-}
-
-/* LCD Backlight data */
-static struct samsung_bl_gpio_info smdkc210_bl_gpio_info = {
- .no = EXYNOS4_GPD0(1),
- .func = S3C_GPIO_SFN(2),
-};
-
-static struct platform_pwm_backlight_data smdkc210_bl_data = {
- .pwm_id = 1,
- .pwm_period_ns = 1000,
-};
-
-static void __init smdkc210_map_io(void)
-{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
- s3c24xx_init_clocks(24000000);
- s3c24xx_init_uarts(smdkc210_uartcfgs, ARRAY_SIZE(smdkc210_uartcfgs));
-}
-
-static void __init smdkc210_machine_init(void)
-{
- s3c_i2c1_set_platdata(NULL);
- i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
-
- smdkc210_smsc911x_init();
-
- s3c_sdhci0_set_platdata(&smdkc210_hsmmc0_pdata);
- s3c_sdhci1_set_platdata(&smdkc210_hsmmc1_pdata);
- s3c_sdhci2_set_platdata(&smdkc210_hsmmc2_pdata);
- s3c_sdhci3_set_platdata(&smdkc210_hsmmc3_pdata);
-
- samsung_bl_set(&smdkc210_bl_gpio_info, &smdkc210_bl_data);
- s5p_fimd0_set_platdata(&smdkc210_lcd0_pdata);
-
- platform_add_devices(smdkc210_devices, ARRAY_SIZE(smdkc210_devices));
-}
-
-MACHINE_START(SMDKC210, "SMDKC210")
- /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
- .init_irq = exynos4_init_irq,
- .map_io = smdkc210_map_io,
- .init_machine = smdkc210_machine_init,
- .timer = &exynos4_timer,
-MACHINE_END
*/
#include <linux/serial_core.h>
+#include <linux/delay.h>
#include <linux/gpio.h>
+#include <linux/lcd.h>
#include <linux/mmc/host.h>
#include <linux/platform_device.h>
#include <linux/smsc911x.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
+#include <video/platform_lcd.h>
#include <plat/regs-serial.h>
#include <plat/regs-srom.h>
+#include <plat/regs-fb-v4.h>
#include <plat/exynos4.h>
#include <plat/cpu.h>
#include <plat/devs.h>
+#include <plat/fb.h>
#include <plat/keypad.h>
#include <plat/sdhci.h>
#include <plat/iic.h>
.clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
};
+static void lcd_lte480wv_set_power(struct plat_lcd_data *pd,
+ unsigned int power)
+{
+ if (power) {
+#if !defined(CONFIG_BACKLIGHT_PWM)
+ gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_HIGH, "GPD0");
+ gpio_free(EXYNOS4_GPD0(1));
+#endif
+ /* fire nRESET on power up */
+ gpio_request(EXYNOS4_GPX0(6), "GPX0");
+
+ gpio_direction_output(EXYNOS4_GPX0(6), 1);
+ mdelay(100);
+
+ gpio_set_value(EXYNOS4_GPX0(6), 0);
+ mdelay(10);
+
+ gpio_set_value(EXYNOS4_GPX0(6), 1);
+ mdelay(10);
+
+ gpio_free(EXYNOS4_GPX0(6));
+ } else {
+#if !defined(CONFIG_BACKLIGHT_PWM)
+ gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_LOW, "GPD0");
+ gpio_free(EXYNOS4_GPD0(1));
+#endif
+ }
+}
+
+static struct plat_lcd_data smdkv310_lcd_lte480wv_data = {
+ .set_power = lcd_lte480wv_set_power,
+};
+
+static struct platform_device smdkv310_lcd_lte480wv = {
+ .name = "platform-lcd",
+ .dev.parent = &s5p_device_fimd0.dev,
+ .dev.platform_data = &smdkv310_lcd_lte480wv_data,
+};
+
+static struct s3c_fb_pd_win smdkv310_fb_win0 = {
+ .win_mode = {
+ .left_margin = 13,
+ .right_margin = 8,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+ },
+ .max_bpp = 32,
+ .default_bpp = 24,
+};
+
+static struct s3c_fb_platdata smdkv310_lcd0_pdata __initdata = {
+ .win[0] = &smdkv310_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ .setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
+};
+
static struct resource smdkv310_smsc911x_resources[] = {
[0] = {
.start = EXYNOS4_PA_SROM_BANK(1),
&exynos4_device_sysmmu,
&samsung_asoc_dma,
&samsung_asoc_idma,
+ &s5p_device_fimd0,
+ &smdkv310_lcd_lte480wv,
&smdkv310_smsc911x,
&exynos4_device_ahci,
};
samsung_keypad_set_platdata(&smdkv310_keypad_data);
samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
+ s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata);
platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
}
.init_machine = smdkv310_machine_init,
.timer = &exynos4_timer,
MACHINE_END
+
+MACHINE_START(SMDKC210, "SMDKC210")
+ /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+ .boot_params = S5P_PA_SDRAM + 0x100,
+ .init_irq = exynos4_init_irq,
+ .map_io = smdkv310_map_io,
+ .init_machine = smdkv310_machine_init,
+ .timer = &exynos4_timer,
+MACHINE_END
select CPU_ARM920T
select S3C_GPIO_PULL_UP
select S3C2410_CLOCK
- select S3C2410_GPIO
select CPU_LLSERIAL_S3C2410
select S3C2410_PM if PM
select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
help
Power Management code common to S3C2410 and better
-config S3C2410_GPIO
- bool
- help
- GPIO code for S3C2410 and similar processors
-
config SIMTEC_NOR
bool
help
obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o
-obj-$(CONFIG_S3C2410_GPIO) += gpio.o
obj-$(CONFIG_S3C2410_CPUFREQ) += cpu-freq.o
obj-$(CONFIG_S3C2410_PLLTABLE) += pll.o
.channels[0] = S3C2410_DCON_CH0_SDI | DMA_CH_VALID,
.channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID,
.channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
- .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
},
[DMACH_SPI0] = {
.name = "spi0",
.channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT,
- .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT,
},
[DMACH_SPI1] = {
.name = "spi1",
.channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
- .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
},
[DMACH_UART0] = {
.name = "uart0",
.channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
},
[DMACH_UART1] = {
.name = "uart1",
.channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
},
[DMACH_UART2] = {
.name = "uart2",
.channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
},
[DMACH_TIMER] = {
.name = "timer",
.name = "i2s-sdi",
.channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID,
.channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID,
- .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
},
[DMACH_I2S_OUT] = {
.name = "i2s-sdo",
.channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
},
[DMACH_USB_EP1] = {
.name = "usb-ep1",
+++ /dev/null
-/* linux/arch/arm/mach-s3c2410/gpio.c
- *
- * Copyright (c) 2004-2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 GPIO support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/gpio-fns.h>
-#include <asm/irq.h>
-
-#include <mach/regs-gpio.h>
-
-int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
- unsigned int config)
-{
- void __iomem *reg = S3C24XX_EINFLT0;
- unsigned long flags;
- unsigned long val;
-
- if (pin < S3C2410_GPG(8) || pin > S3C2410_GPG(15))
- return -EINVAL;
-
- config &= 0xff;
-
- pin -= S3C2410_GPG(8);
- reg += pin & ~3;
-
- local_irq_save(flags);
-
- /* update filter width and clock source */
-
- val = __raw_readl(reg);
- val &= ~(0xff << ((pin & 3) * 8));
- val |= config << ((pin & 3) * 8);
- __raw_writel(val, reg);
-
- /* update filter enable */
-
- val = __raw_readl(S3C24XX_EXTINT2);
- val &= ~(1 << ((pin * 4) + 3));
- val |= on << ((pin * 4) + 3);
- __raw_writel(val, S3C24XX_EXTINT2);
-
- local_irq_restore(flags);
-
- return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_irqfilter);
#define __ASM_ARCH_MAP_H
#include <plat/map-base.h>
-#include <plat/map.h>
-#define S3C2410_ADDR(x) S3C_ADDR(x)
+/*
+ * S3C2410 UART offset is 0x4000 but the other SoCs are 0x400.
+ * So need to define it, and here is to avoid redefinition warning.
+ */
+#define S3C_UART_OFFSET (0x4000)
+
+#include <plat/map-s3c.h>
+
+/*
+ * interrupt controller is the first thing we put in, to make
+ * the assembly code for the irq detection easier
+ */
+#define S3C2410_PA_IRQ (0x4A000000)
+#define S3C24XX_SZ_IRQ SZ_1M
+
+/* memory controller registers */
+#define S3C2410_PA_MEMCTRL (0x48000000)
+#define S3C24XX_SZ_MEMCTRL SZ_1M
+
+/* UARTs */
+#define S3C_VA_UARTx(uart) (S3C_VA_UART + ((uart * S3C_UART_OFFSET)))
+
+/* Timers */
+#define S3C2410_PA_TIMER (0x51000000)
+#define S3C24XX_SZ_TIMER SZ_1M
+
+/* Clock and Power management */
+#define S3C24XX_SZ_CLKPWR SZ_1M
+
+/* USB Device port */
+#define S3C2410_PA_USBDEV (0x52000000)
+#define S3C24XX_SZ_USBDEV SZ_1M
+
+/* Watchdog */
+#define S3C2410_PA_WATCHDOG (0x53000000)
+#define S3C24XX_SZ_WATCHDOG SZ_1M
+
+/* Standard size definitions for peripheral blocks. */
+
+#define S3C24XX_SZ_UART SZ_1M
+#define S3C24XX_SZ_IIS SZ_1M
+#define S3C24XX_SZ_ADC SZ_1M
+#define S3C24XX_SZ_SPI SZ_1M
+#define S3C24XX_SZ_SDI SZ_1M
+#define S3C24XX_SZ_NAND SZ_1M
+#define S3C24XX_SZ_GPIO SZ_1M
/* USB host controller */
#define S3C2410_PA_USBHOST (0x49000000)
/* S3C2412 memory and IO controls */
#define S3C2412_PA_SSMC (0x4F000000)
-#define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000)
#define S3C2412_PA_EBI (0x48800000)
-#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00010000)
/* physical addresses of all the chip-select areas */
#define S3C24XX_PA_DMA S3C2410_PA_DMA
#define S3C24XX_PA_CLKPWR S3C2410_PA_CLKPWR
#define S3C24XX_PA_LCD S3C2410_PA_LCD
-#define S3C24XX_PA_UART S3C2410_PA_UART
#define S3C24XX_PA_TIMER S3C2410_PA_TIMER
#define S3C24XX_PA_USBDEV S3C2410_PA_USBDEV
#define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG
#define S3C24XX_PA_IIS S3C2410_PA_IIS
-#define S3C24XX_PA_GPIO S3C2410_PA_GPIO
#define S3C24XX_PA_RTC S3C2410_PA_RTC
#define S3C24XX_PA_ADC S3C2410_PA_ADC
#define S3C24XX_PA_SPI S3C2410_PA_SPI
select CPU_LLSERIAL_S3C2440
select S3C2412_PM if PM
select S3C2412_DMA if S3C2410_DMA
- select S3C2410_GPIO
help
Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
obj-$(CONFIG_CPU_S3C2412) += s3c2412.o
obj-$(CONFIG_CPU_S3C2412) += irq.o
obj-$(CONFIG_CPU_S3C2412) += clock.o
-obj-$(CONFIG_CPU_S3C2412) += gpio.o
obj-$(CONFIG_S3C2412_DMA) += dma.o
obj-$(CONFIG_S3C2412_PM) += pm.o
obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep.o
.name = "sdi",
.channels = MAP(S3C2412_DMAREQSEL_SDI),
.channels_rx = MAP(S3C2412_DMAREQSEL_SDI),
- .hw_addr.to = S3C2410_PA_SDI + S3C2410_SDIDATA,
- .hw_addr.from = S3C2410_PA_SDI + S3C2410_SDIDATA,
},
[DMACH_SPI0] = {
.name = "spi0",
.channels = MAP(S3C2412_DMAREQSEL_SPI0TX),
.channels_rx = MAP(S3C2412_DMAREQSEL_SPI0RX),
- .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT,
- .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT,
},
[DMACH_SPI1] = {
.name = "spi1",
.channels = MAP(S3C2412_DMAREQSEL_SPI1TX),
.channels_rx = MAP(S3C2412_DMAREQSEL_SPI1RX),
- .hw_addr.to = S3C2410_PA_SPI + S3C2412_SPI1 + S3C2410_SPTDAT,
- .hw_addr.from = S3C2410_PA_SPI + S3C2412_SPI1 + S3C2410_SPRDAT,
},
[DMACH_UART0] = {
.name = "uart0",
.channels = MAP(S3C2412_DMAREQSEL_UART0_0),
.channels_rx = MAP(S3C2412_DMAREQSEL_UART0_0),
- .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
},
[DMACH_UART1] = {
.name = "uart1",
.channels = MAP(S3C2412_DMAREQSEL_UART1_0),
.channels_rx = MAP(S3C2412_DMAREQSEL_UART1_0),
- .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
},
[DMACH_UART2] = {
.name = "uart2",
.channels = MAP(S3C2412_DMAREQSEL_UART2_0),
.channels_rx = MAP(S3C2412_DMAREQSEL_UART2_0),
- .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
},
[DMACH_UART0_SRC2] = {
.name = "uart0",
.channels = MAP(S3C2412_DMAREQSEL_UART0_1),
.channels_rx = MAP(S3C2412_DMAREQSEL_UART0_1),
- .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
},
[DMACH_UART1_SRC2] = {
.name = "uart1",
.channels = MAP(S3C2412_DMAREQSEL_UART1_1),
.channels_rx = MAP(S3C2412_DMAREQSEL_UART1_1),
- .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
},
[DMACH_UART2_SRC2] = {
.name = "uart2",
.channels = MAP(S3C2412_DMAREQSEL_UART2_1),
.channels_rx = MAP(S3C2412_DMAREQSEL_UART2_1),
- .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
},
[DMACH_TIMER] = {
.name = "timer",
+++ /dev/null
-/* linux/arch/arm/mach-s3c2412/gpio.c
- *
- * Copyright (c) 2007 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * http://armlinux.simtec.co.uk/.
- *
- * S3C2412/S3C2413 specific GPIO support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/hardware.h>
-
-#include <plat/gpio-core.h>
-
-int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state)
-{
- struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
- unsigned long offs = pin - chip->chip.base;
- unsigned long flags;
- unsigned long slpcon;
-
- offs *= 2;
-
- if (pin < S3C2410_GPB(0))
- return -EINVAL;
-
- if (pin >= S3C2410_GPF(0) &&
- pin <= S3C2410_GPG(16))
- return -EINVAL;
-
- if (pin > S3C2410_GPH(16))
- return -EINVAL;
-
- local_irq_save(flags);
-
- slpcon = __raw_readl(chip->base + 0x0C);
-
- slpcon &= ~(3 << offs);
- slpcon |= state << offs;
-
- __raw_writel(slpcon, chip->base + 0x0C);
-
- local_irq_restore(flags);
-
- return 0;
-}
-
-EXPORT_SYMBOL(s3c2412_gpio_set_sleepcfg);
select S3C_GPIO_PULL_UP
select S3C2410_CLOCK
select S3C2410_PM if PM
- select S3C2410_GPIO
select S3C2440_DMA if S3C2410_DMA
select CPU_S3C244X
select CPU_LLSERIAL_S3C2440
select CPU_ARM920T
select S3C_GPIO_PULL_DOWN
select S3C2410_CLOCK
- select S3C2410_GPIO
select S3C2410_PM if PM
select CPU_S3C244X
select CPU_LLSERIAL_S3C2440
.channels[1] = S3C2440_DCON_CH1_SDI | DMA_CH_VALID,
.channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID,
.channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
- .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
},
[DMACH_SPI0] = {
.name = "spi0",
.channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT,
- .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT,
},
[DMACH_SPI1] = {
.name = "spi1",
.channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
- .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
},
[DMACH_UART0] = {
.name = "uart0",
.channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
},
[DMACH_UART1] = {
.name = "uart1",
.channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
},
[DMACH_UART2] = {
.name = "uart2",
.channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
},
[DMACH_TIMER] = {
.name = "timer",
.name = "i2s-sdi",
.channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID,
.channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID,
- .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
},
[DMACH_I2S_OUT] = {
.name = "i2s-sdo",
.channels[0] = S3C2440_DCON_CH0_I2SSDO | DMA_CH_VALID,
.channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
},
[DMACH_PCM_IN] = {
.name = "pcm-in",
.channels[0] = S3C2440_DCON_CH0_PCMIN | DMA_CH_VALID,
.channels[2] = S3C2440_DCON_CH2_PCMIN | DMA_CH_VALID,
- .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
},
[DMACH_PCM_OUT] = {
.name = "pcm-out",
.channels[1] = S3C2440_DCON_CH1_PCMOUT | DMA_CH_VALID,
.channels[3] = S3C2440_DCON_CH3_PCMOUT | DMA_CH_VALID,
- .hw_addr.to = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
},
[DMACH_MIC_IN] = {
.name = "mic-in",
.channels[2] = S3C2440_DCON_CH2_MICIN | DMA_CH_VALID,
.channels[3] = S3C2440_DCON_CH3_MICIN | DMA_CH_VALID,
- .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_MIC_DATA,
},
[DMACH_USB_EP1] = {
.name = "usb-ep1",
[DMACH_SDI] = {
.name = "sdi",
.channels = MAP(S3C2443_DMAREQSEL_SDI),
- .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
- .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
},
[DMACH_SPI0] = {
.name = "spi0",
.channels = MAP(S3C2443_DMAREQSEL_SPI0TX),
- .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT,
- .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT,
},
[DMACH_SPI1] = {
.name = "spi1",
.channels = MAP(S3C2443_DMAREQSEL_SPI1TX),
- .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
- .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
},
[DMACH_UART0] = {
.name = "uart0",
.channels = MAP(S3C2443_DMAREQSEL_UART0_0),
- .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
},
[DMACH_UART1] = {
.name = "uart1",
.channels = MAP(S3C2443_DMAREQSEL_UART1_0),
- .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
},
[DMACH_UART2] = {
.name = "uart2",
.channels = MAP(S3C2443_DMAREQSEL_UART2_0),
- .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
},
[DMACH_UART3] = {
.name = "uart3",
.channels = MAP(S3C2443_DMAREQSEL_UART3_0),
- .hw_addr.to = S3C2443_PA_UART3 + S3C2410_UTXH,
- .hw_addr.from = S3C2443_PA_UART3 + S3C2410_URXH,
},
[DMACH_UART0_SRC2] = {
.name = "uart0",
.channels = MAP(S3C2443_DMAREQSEL_UART0_1),
- .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
},
[DMACH_UART1_SRC2] = {
.name = "uart1",
.channels = MAP(S3C2443_DMAREQSEL_UART1_1),
- .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
},
[DMACH_UART2_SRC2] = {
.name = "uart2",
.channels = MAP(S3C2443_DMAREQSEL_UART2_1),
- .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
},
[DMACH_UART3_SRC2] = {
.name = "uart3",
.channels = MAP(S3C2443_DMAREQSEL_UART3_1),
- .hw_addr.to = S3C2443_PA_UART3 + S3C2410_UTXH,
- .hw_addr.from = S3C2443_PA_UART3 + S3C2410_URXH,
},
[DMACH_TIMER] = {
.name = "timer",
[DMACH_I2S_IN] = {
.name = "i2s-sdi",
.channels = MAP(S3C2443_DMAREQSEL_I2SRX),
- .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
},
[DMACH_I2S_OUT] = {
.name = "i2s-sdo",
.channels = MAP(S3C2443_DMAREQSEL_I2STX),
- .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
},
[DMACH_PCM_IN] = {
.name = "pcm-in",
.channels = MAP(S3C2443_DMAREQSEL_PCMIN),
- .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
},
[DMACH_PCM_OUT] = {
.name = "pcm-out",
.channels = MAP(S3C2443_DMAREQSEL_PCMOUT),
- .hw_addr.to = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
},
[DMACH_MIC_IN] = {
.name = "mic-in",
.channels = MAP(S3C2443_DMAREQSEL_MICIN),
- .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_MIC_DATA,
},
};
#define __ASM_ARCH_MAP_H __FILE__
#include <plat/map-base.h>
+#include <plat/map-s3c.h>
/*
* Post-mux Chip Select Regions Xm0CSn_
#define S3C64XX_PA_IIC1 (0x7F00F000)
#define S3C64XX_PA_GPIO (0x7F008000)
-#define S3C64XX_VA_GPIO S3C_ADDR_CPU(0x00000000)
#define S3C64XX_SZ_GPIO SZ_4K
#define S3C64XX_PA_SDRAM (0x50000000)
#define S3C64XX_PA_VIC1 (0x71300000)
#define S3C64XX_PA_MODEM (0x74108000)
-#define S3C64XX_VA_MODEM S3C_ADDR_CPU(0x00100000)
#define S3C64XX_PA_USBHOST (0x74300000)
#define S3C64XX_PA_USB_HSPHY (0x7C100000)
-#define S3C64XX_VA_USB_HSPHY S3C_ADDR_CPU(0x00200000)
-
-/* place VICs close together */
-#define VA_VIC0 (S3C_VA_IRQ + 0x00)
-#define VA_VIC1 (S3C_VA_IRQ + 0x10000)
/* compatibiltiy defines. */
#define S3C_PA_TIMER S3C64XX_PA_TIMER
#define S3C_PA_FB S3C64XX_PA_FB
#define S3C_PA_USBHOST S3C64XX_PA_USBHOST
#define S3C_PA_USB_HSOTG S3C64XX_PA_USB_HSOTG
-#define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY
#define S3C_PA_RTC S3C64XX_PA_RTC
#define S3C_PA_WDT S3C64XX_PA_WATCHDOG
&s3c_device_fb,
&s3c_device_ohci,
&s3c_device_usb_hsotg,
- &s3c_device_adc,
- &s3c_device_rtc,
- &s3c_device_ts,
&s3c_device_timer[0],
&s3c64xx_device_iis0,
&s3c64xx_device_iis1,
.dev.platform_data = &mini6410_lcd_power_data,
};
-static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
- .delay = 10000,
- .presc = 49,
- .oversampling_shift = 2,
-};
-
static struct platform_device *mini6410_devices[] __initdata = {
&mini6410_device_eth,
&s3c_device_hsmmc0,
s3c_nand_set_platdata(&mini6410_nand_info);
s3c_fb_set_platdata(&mini6410_lcd_pdata);
- s3c24xx_ts_set_platdata(&s3c_ts_platform);
+ s3c24xx_ts_set_platdata(NULL);
/* configure nCS1 width to 16 bits */
&s3c_device_ohci,
};
-static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
- .delay = 10000,
- .presc = 49,
- .oversampling_shift = 2,
-};
-
static void __init real6410_map_io(void)
{
u32 tmp;
s3c_fb_set_platdata(&real6410_lcd_pdata);
s3c_nand_set_platdata(&real6410_nand_info);
- s3c24xx_ts_set_platdata(&s3c_ts_platform);
+ s3c24xx_ts_set_platdata(NULL);
/* configure nCS1 width to 16 bits */
{ I2C_BOARD_INFO("24c128", 0x57), }, /* Samsung S524AD0XD1 */
};
-static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
- .delay = 10000,
- .presc = 49,
- .oversampling_shift = 2,
-};
-
/* LCD Backlight data */
static struct samsung_bl_gpio_info smdk6410_bl_gpio_info = {
.no = S3C64XX_GPF(15),
samsung_keypad_set_platdata(&smdk6410_keypad_data);
- s3c24xx_ts_set_platdata(&s3c_ts_platform);
+ s3c24xx_ts_set_platdata(NULL);
/* configure nCS1 width to 16 bits */
/* To be populated */
};
-static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
- .delay = 10000,
- .presc = 49,
- .oversampling_shift = 2,
-};
-
/* LCD Backlight data */
static struct samsung_bl_gpio_info smdk6440_bl_gpio_info = {
.no = S5P6440_GPF(15),
static void __init smdk6440_machine_init(void)
{
- s3c24xx_ts_set_platdata(&s3c_ts_platform);
+ s3c24xx_ts_set_platdata(NULL);
s3c_i2c0_set_platdata(&s5p6440_i2c0_data);
s3c_i2c1_set_platdata(&s5p6440_i2c1_data);
{ I2C_BOARD_INFO("24c128", 0x57), },/* Samsung S524AD0XD1 EEPROM */
};
-static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
- .delay = 10000,
- .presc = 49,
- .oversampling_shift = 2,
-};
-
/* LCD Backlight data */
static struct samsung_bl_gpio_info smdk6450_bl_gpio_info = {
.no = S5P6450_GPF(15),
static void __init smdk6450_machine_init(void)
{
- s3c24xx_ts_set_platdata(&s3c_ts_platform);
+ s3c24xx_ts_set_platdata(NULL);
s3c_i2c0_set_platdata(&s5p6450_i2c0_data);
s3c_i2c1_set_platdata(&s5p6450_i2c1_data);
&s5pc100_device_spdif,
};
-static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
- .delay = 10000,
- .presc = 49,
- .oversampling_shift = 2,
-};
-
/* LCD Backlight data */
static struct samsung_bl_gpio_info smdkc100_bl_gpio_info = {
.no = S5PC100_GPD(0),
static void __init smdkc100_machine_init(void)
{
- s3c24xx_ts_set_platdata(&s3c_ts_platform);
+ s3c24xx_ts_set_platdata(NULL);
/* I2C */
s3c_i2c0_set_platdata(NULL);
select S3C_PL330_DMA
select S5P_EXT_INT
select S5P_HRT
- select S5PV210_PM if PM
help
Enable S5PV210 CPU support
endmenu
-config S5PV210_PM
- bool
- help
- Power Management code common to S5PV210
-
endif
obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o dma.o
obj-$(CONFIG_CPU_S5PV210) += setup-i2c0.o
-obj-$(CONFIG_S5PV210_PM) += pm.o sleep.o
+obj-$(CONFIG_PM) += pm.o sleep.o
# machine support
/* To Be Updated */
};
-static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
- .delay = 10000,
- .presc = 49,
- .oversampling_shift = 2,
-};
-
/* LCD Backlight data */
static struct samsung_bl_gpio_info smdkv210_bl_gpio_info = {
.no = S5PV210_GPD0(3),
smdkv210_dm9000_init();
samsung_keypad_set_platdata(&smdkv210_keypad_data);
- s3c24xx_ts_set_platdata(&s3c_ts_platform);
+ s3c24xx_ts_set_platdata(NULL);
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
+++ /dev/null
-/* linux/include/asm-arm/plat-s3c24xx/map.h
- *
- * Copyright (c) 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_S3C24XX_MAP_H
-#define __ASM_PLAT_S3C24XX_MAP_H
-
-/* interrupt controller is the first thing we put in, to make
- * the assembly code for the irq detection easier
- */
-#define S3C24XX_VA_IRQ S3C_VA_IRQ
-#define S3C2410_PA_IRQ (0x4A000000)
-#define S3C24XX_SZ_IRQ SZ_1M
-
-/* memory controller registers */
-#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
-#define S3C2410_PA_MEMCTRL (0x48000000)
-#define S3C24XX_SZ_MEMCTRL SZ_1M
-
-/* UARTs */
-#define S3C24XX_VA_UART S3C_VA_UART
-#define S3C2410_PA_UART (0x50000000)
-#define S3C24XX_SZ_UART SZ_1M
-#define S3C_UART_OFFSET (0x4000)
-
-#define S3C_VA_UARTx(uart) (S3C_VA_UART + ((uart * S3C_UART_OFFSET)))
-
-/* Timers */
-#define S3C24XX_VA_TIMER S3C_VA_TIMER
-#define S3C2410_PA_TIMER (0x51000000)
-#define S3C24XX_SZ_TIMER SZ_1M
-
-/* Clock and Power management */
-#define S3C24XX_VA_CLKPWR S3C_VA_SYS
-#define S3C24XX_SZ_CLKPWR SZ_1M
-
-/* USB Device port */
-#define S3C2410_PA_USBDEV (0x52000000)
-#define S3C24XX_SZ_USBDEV SZ_1M
-
-/* Watchdog */
-#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
-#define S3C2410_PA_WATCHDOG (0x53000000)
-#define S3C24XX_SZ_WATCHDOG SZ_1M
-
-/* Standard size definitions for peripheral blocks. */
-
-#define S3C24XX_SZ_IIS SZ_1M
-#define S3C24XX_SZ_ADC SZ_1M
-#define S3C24XX_SZ_SPI SZ_1M
-#define S3C24XX_SZ_SDI SZ_1M
-#define S3C24XX_SZ_NAND SZ_1M
-
-/* GPIO ports */
-
-/* the calculation for the VA of this must ensure that
- * it is the same distance apart from the UART in the
- * phsyical address space, as the initial mapping for the IO
- * is done as a 1:1 mapping. This puts it (currently) at
- * 0xFA800000, which is not in the way of any current mapping
- * by the base system.
-*/
-
-#define S3C2410_PA_GPIO (0x56000000)
-#define S3C24XX_VA_GPIO ((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
-#define S3C24XX_SZ_GPIO SZ_1M
-
-
-/* ISA style IO, for each machine to sort out mappings for, if it
- * implements it. We reserve two 16M regions for ISA.
- */
-
-#define S3C24XX_VA_ISA_WORD S3C2410_ADDR(0x02000000)
-#define S3C24XX_VA_ISA_BYTE S3C2410_ADDR(0x03000000)
-
-/* deal with the registers that move under the 2412/2413 */
-
-#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
-#ifndef __ASSEMBLY__
-extern void __iomem *s3c24xx_va_gpio2;
-#endif
-#ifdef CONFIG_CPU_S3C2412_ONLY
-#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
-#else
-#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
-#endif
-#else
-#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
-#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
-#endif
-
-#endif /* __ASM_PLAT_S3C24XX_MAP_H */
mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & PLL46XX_MDIV_MASK;
pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK;
sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK;
- kdiv = pll_con1 & PLL46XX_KDIV_MASK;
if (pll_type == pll_4650c)
kdiv = pll_con1 & PLL4650C_KDIV_MASK;
void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd)
{
- struct s3c_sdhci_platdata *set = &s3c_hsmmc0_def_platdata;
-
- set->cd_type = pd->cd_type;
- set->ext_cd_init = pd->ext_cd_init;
- set->ext_cd_cleanup = pd->ext_cd_cleanup;
- set->ext_cd_gpio = pd->ext_cd_gpio;
- set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
-
- if (pd->max_width)
- set->max_width = pd->max_width;
- if (pd->cfg_gpio)
- set->cfg_gpio = pd->cfg_gpio;
- if (pd->cfg_card)
- set->cfg_card = pd->cfg_card;
- if (pd->host_caps)
- set->host_caps |= pd->host_caps;
- if (pd->clk_type)
- set->clk_type = pd->clk_type;
+ s3c_sdhci_set_platdata(pd, &s3c_hsmmc0_def_platdata);
}
void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd)
{
- struct s3c_sdhci_platdata *set = &s3c_hsmmc1_def_platdata;
-
- set->cd_type = pd->cd_type;
- set->ext_cd_init = pd->ext_cd_init;
- set->ext_cd_cleanup = pd->ext_cd_cleanup;
- set->ext_cd_gpio = pd->ext_cd_gpio;
- set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
-
- if (pd->max_width)
- set->max_width = pd->max_width;
- if (pd->cfg_gpio)
- set->cfg_gpio = pd->cfg_gpio;
- if (pd->cfg_card)
- set->cfg_card = pd->cfg_card;
- if (pd->host_caps)
- set->host_caps |= pd->host_caps;
- if (pd->clk_type)
- set->clk_type = pd->clk_type;
+ s3c_sdhci_set_platdata(pd, &s3c_hsmmc1_def_platdata);
}
void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd)
{
- struct s3c_sdhci_platdata *set = &s3c_hsmmc2_def_platdata;
-
- set->cd_type = pd->cd_type;
- set->ext_cd_init = pd->ext_cd_init;
- set->ext_cd_cleanup = pd->ext_cd_cleanup;
- set->ext_cd_gpio = pd->ext_cd_gpio;
- set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
-
- if (pd->max_width)
- set->max_width = pd->max_width;
- if (pd->cfg_gpio)
- set->cfg_gpio = pd->cfg_gpio;
- if (pd->cfg_card)
- set->cfg_card = pd->cfg_card;
- if (pd->host_caps)
- set->host_caps |= pd->host_caps;
- if (pd->clk_type)
- set->clk_type = pd->clk_type;
+ s3c_sdhci_set_platdata(pd, &s3c_hsmmc2_def_platdata);
}
void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd)
{
- struct s3c_sdhci_platdata *set = &s3c_hsmmc3_def_platdata;
-
- set->cd_type = pd->cd_type;
- set->ext_cd_init = pd->ext_cd_init;
- set->ext_cd_cleanup = pd->ext_cd_cleanup;
- set->ext_cd_gpio = pd->ext_cd_gpio;
- set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
-
- if (pd->max_width)
- set->max_width = pd->max_width;
- if (pd->cfg_gpio)
- set->cfg_gpio = pd->cfg_gpio;
- if (pd->cfg_card)
- set->cfg_card = pd->cfg_card;
- if (pd->host_caps)
- set->host_caps |= pd->host_caps;
- if (pd->clk_type)
- set->clk_type = pd->clk_type;
+ s3c_sdhci_set_platdata(pd, &s3c_hsmmc3_def_platdata);
}
.resource = s3c_ts_resource,
};
+static struct s3c2410_ts_mach_info default_ts_data __initdata = {
+ .delay = 10000,
+ .presc = 49,
+ .oversampling_shift = 2,
+};
+
void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd)
{
+ if (!pd)
+ pd = &default_ts_data;
+
s3c_set_platdata(pd, sizeof(struct s3c2410_ts_mach_info),
&s3c_device_ts);
}
#define DMA_CH_VALID (1<<31)
#define DMA_CH_NEVER (1<<30)
-struct s3c24xx_dma_addr {
- unsigned long from;
- unsigned long to;
-};
-
/* struct s3c24xx_dma_map
*
* this holds the mapping information for the channel selected
struct s3c24xx_dma_map {
const char *name;
- struct s3c24xx_dma_addr hw_addr;
unsigned long channels[S3C_DMA_CHANNELS];
unsigned long channels_rx[S3C_DMA_CHANNELS];
--- /dev/null
+/* linux/arch/arm/plat-samsung/include/plat/map-s3c.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_MAP_S3C_H
+#define __ASM_PLAT_MAP_S3C_H __FILE__
+
+#define S3C24XX_VA_IRQ S3C_VA_IRQ
+#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
+#define S3C24XX_VA_UART S3C_VA_UART
+
+#define S3C24XX_VA_TIMER S3C_VA_TIMER
+#define S3C24XX_VA_CLKPWR S3C_VA_SYS
+#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
+
+#define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000)
+#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00010000)
+
+#define S3C2410_PA_UART (0x50000000)
+#define S3C24XX_PA_UART S3C2410_PA_UART
+
+#ifndef S3C_UART_OFFSET
+#define S3C_UART_OFFSET (0x400)
+#endif
+
+/*
+ * GPIO ports
+ *
+ * the calculation for the VA of this must ensure that
+ * it is the same distance apart from the UART in the
+ * phsyical address space, as the initial mapping for the IO
+ * is done as a 1:1 mapping. This puts it (currently) at
+ * 0xFA800000, which is not in the way of any current mapping
+ * by the base system.
+*/
+
+#define S3C2410_PA_GPIO (0x56000000)
+#define S3C24XX_PA_GPIO S3C2410_PA_GPIO
+
+#define S3C24XX_VA_GPIO ((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
+#define S3C64XX_VA_GPIO S3C_ADDR_CPU(0x00000000)
+
+#define S3C64XX_VA_MODEM S3C_ADDR_CPU(0x00100000)
+#define S3C64XX_VA_USB_HSPHY S3C_ADDR_CPU(0x00200000)
+
+#define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY
+
+/*
+ * ISA style IO, for each machine to sort out mappings for,
+ * if it implements it. We reserve two 16M regions for ISA.
+ */
+
+#define S3C2410_ADDR(x) S3C_ADDR(x)
+
+#define S3C24XX_VA_ISA_WORD S3C2410_ADDR(0x02000000)
+#define S3C24XX_VA_ISA_BYTE S3C2410_ADDR(0x03000000)
+
+/* deal with the registers that move under the 2412/2413 */
+
+#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
+#ifndef __ASSEMBLY__
+extern void __iomem *s3c24xx_va_gpio2;
+#endif
+#ifdef CONFIG_CPU_S3C2412_ONLY
+#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
+#else
+#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
+#endif
+#else
+#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
+#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
+#endif
+
+#include <plat/map-s5p.h>
+
+#endif /* __ASM_PLAT_MAP_S3C_H */
-/* linux/arch/arm/plat-s5p/include/plat/map-s5p.h
+/* linux/arch/arm/plat-samsung/include/plat/map-s5p.h
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
#define S5P_VA_GIC_CPU S3C_ADDR(0x02810000)
#define S5P_VA_GIC_DIST S3C_ADDR(0x02820000)
-#define S3C_VA_USB_HSPHY S3C_ADDR(0x02900000)
-
#define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000))
#define VA_VIC0 VA_VIC(0)
#define VA_VIC1 VA_VIC(1)
#define S3C_UART_OFFSET (0x400)
#endif
+#include <plat/map-s3c.h>
+
#endif /* __ASM_PLAT_MAP_S5P_H */
struct mmc_card *card);
};
+/* s3c_sdhci_set_platdata() - common helper for setting SDHCI platform data
+ * @pd: The default platform data for this device.
+ * @set: Pointer to the platform data to fill in.
+ */
+extern void s3c_sdhci_set_platdata(struct s3c_sdhci_platdata *pd,
+ struct s3c_sdhci_platdata *set);
+
/**
* s3c_sdhci0_set_platdata - Set platform data for S3C SDHCI device.
* @pd: Platform data to register to device.
#include <linux/platform_device.h>
#include <plat/devs.h>
+#include <plat/sdhci.h>
void __init *s3c_set_platdata(void *pd, size_t pdsize,
struct platform_device *pdev)
pdev->dev.platform_data = npd;
return npd;
}
+
+void s3c_sdhci_set_platdata(struct s3c_sdhci_platdata *pd,
+ struct s3c_sdhci_platdata *set)
+{
+ set->cd_type = pd->cd_type;
+ set->ext_cd_init = pd->ext_cd_init;
+ set->ext_cd_cleanup = pd->ext_cd_cleanup;
+ set->ext_cd_gpio = pd->ext_cd_gpio;
+ set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
+
+ if (pd->max_width)
+ set->max_width = pd->max_width;
+ if (pd->cfg_gpio)
+ set->cfg_gpio = pd->cfg_gpio;
+ if (pd->cfg_card)
+ set->cfg_card = pd->cfg_card;
+ if (pd->host_caps)
+ set->host_caps |= pd->host_caps;
+ if (pd->clk_type)
+ set->clk_type = pd->clk_type;
+}
projects / mv-sheeva.git / commitdiff