]> git.karo-electronics.de Git - linux-beck.git/commitdiff
ASoC: fsl_sai: Don't reset FIFO until TE/RE bit is unset
authorNicolin Chen <Guangyu.Chen@freescale.com>
Wed, 23 Jul 2014 11:23:39 +0000 (19:23 +0800)
committerMark Brown <broonie@linaro.org>
Fri, 25 Jul 2014 17:52:35 +0000 (18:52 +0100)
TE/RE bit of T/RCSR will remain set untill the current frame is physically
finished. The FIFO reset operation should wait this bit's totally cleared
rather than ignoring its status which might cause TE/RE disabling failed.

This patch adds delay and timeout to wait for its completion before FIFO
reset.

Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
sound/soc/fsl/fsl_sai.c

index a437899d2d119ecd2471e62155c21372840d6d3b..a79a9b0c08fdb2f12b5f3b8e19e0e9d68a903c2f 100644 (file)
@@ -327,7 +327,7 @@ static int fsl_sai_trigger(struct snd_pcm_substream *substream, int cmd,
 {
        struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
        bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
-       u32 xcsr;
+       u32 xcsr, count = 100;
 
        /*
         * The transmitter bit clock and frame sync are to be
@@ -369,11 +369,20 @@ static int fsl_sai_trigger(struct snd_pcm_substream *substream, int cmd,
                if (!(xcsr & FSL_SAI_CSR_FRDE)) {
                        /* Disable both directions and reset their FIFOs */
                        regmap_update_bits(sai->regmap, FSL_SAI_TCSR,
-                                          FSL_SAI_CSR_TERE | FSL_SAI_CSR_FR,
-                                          FSL_SAI_CSR_FR);
+                                          FSL_SAI_CSR_TERE, 0);
                        regmap_update_bits(sai->regmap, FSL_SAI_RCSR,
-                                          FSL_SAI_CSR_TERE | FSL_SAI_CSR_FR,
-                                          FSL_SAI_CSR_FR);
+                                          FSL_SAI_CSR_TERE, 0);
+
+                       /* TERE will remain set till the end of current frame */
+                       do {
+                               udelay(10);
+                               regmap_read(sai->regmap, FSL_SAI_xCSR(tx), &xcsr);
+                       } while (--count && xcsr & FSL_SAI_CSR_TERE);
+
+                       regmap_update_bits(sai->regmap, FSL_SAI_TCSR,
+                                          FSL_SAI_CSR_FR, FSL_SAI_CSR_FR);
+                       regmap_update_bits(sai->regmap, FSL_SAI_RCSR,
+                                          FSL_SAI_CSR_FR, FSL_SAI_CSR_FR);
                }
                break;
        default: