]> git.karo-electronics.de Git - linux-beck.git/commitdiff
ARM: OMAP2+: UART: Ensure all reg values configured are available from port structure
authorGovindraj.R <govindraj.raja@ti.com>
Mon, 7 Nov 2011 13:27:03 +0000 (18:57 +0530)
committerKevin Hilman <khilman@ti.com>
Thu, 15 Dec 2011 00:05:21 +0000 (16:05 -0800)
Add missing uart regs to uart_port structure which can be used in
context restore. Store dll, dlh, mdr1, scr, efr, lcr, mcr reg values
into uart_port structure while configuring individual port in termios
function.

Signed-off-by: Govindraj.R <govindraj.raja@ti.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de> (for drivers/tty changes)
Signed-off-by: Kevin Hilman <khilman@ti.com>
arch/arm/plat-omap/include/plat/omap-serial.h
drivers/tty/serial/omap-serial.c

index db9bda978767601294162c2ed403a62a7eefa4a2..70e7738dd3a0babc1daef3002d1aa5276568061d 100644 (file)
@@ -97,6 +97,10 @@ struct uart_omap_port {
        unsigned char           mcr;
        unsigned char           fcr;
        unsigned char           efr;
+       unsigned char           dll;
+       unsigned char           dlh;
+       unsigned char           mdr1;
+       unsigned char           scr;
 
        int                     use_dma;
        /*
index a834e913a6e4fbc9396bcf8a4432dd21abe58bd8..5327ff0b008e9b4a36014773e4523dcdf138b726 100644 (file)
@@ -466,8 +466,9 @@ static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl)
                mcr |= UART_MCR_LOOP;
 
        pm_runtime_get_sync(&up->pdev->dev);
-       mcr |= up->mcr;
-       serial_out(up, UART_MCR, mcr);
+       up->mcr = serial_in(up, UART_MCR);
+       up->mcr |= mcr;
+       serial_out(up, UART_MCR, up->mcr);
        pm_runtime_put(&up->pdev->dev);
 }
 
@@ -616,8 +617,6 @@ static inline void
 serial_omap_configure_xonxoff
                (struct uart_omap_port *up, struct ktermios *termios)
 {
-       unsigned char efr = 0;
-
        up->lcr = serial_in(up, UART_LCR);
        serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
        up->efr = serial_in(up, UART_EFR);
@@ -627,8 +626,7 @@ serial_omap_configure_xonxoff
        serial_out(up, UART_XOFF1, termios->c_cc[VSTOP]);
 
        /* clear SW control mode bits */
-       efr = up->efr;
-       efr &= OMAP_UART_SW_CLR;
+       up->efr &= OMAP_UART_SW_CLR;
 
        /*
         * IXON Flag:
@@ -636,7 +634,7 @@ serial_omap_configure_xonxoff
         * Transmit XON1, XOFF1
         */
        if (termios->c_iflag & IXON)
-               efr |= OMAP_UART_SW_TX;
+               up->efr |= OMAP_UART_SW_TX;
 
        /*
         * IXOFF Flag:
@@ -644,7 +642,7 @@ serial_omap_configure_xonxoff
         * Receiver compares XON1, XOFF1.
         */
        if (termios->c_iflag & IXOFF)
-               efr |= OMAP_UART_SW_RX;
+               up->efr |= OMAP_UART_SW_RX;
 
        serial_out(up, UART_EFR, up->efr | UART_EFR_ECB);
        serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
@@ -667,7 +665,7 @@ serial_omap_configure_xonxoff
         * load the new software flow control mode IXON or IXOFF
         * and restore the UARTi.EFR_REG[4] ENHANCED_EN value.
         */
-       serial_out(up, UART_EFR, efr | UART_EFR_SCD);
+       serial_out(up, UART_EFR, up->efr | UART_EFR_SCD);
        serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
 
        serial_out(up, UART_MCR, up->mcr & ~UART_MCR_TCRTLR);
@@ -714,6 +712,10 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
        baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/13);
        quot = serial_omap_get_divisor(port, baud);
 
+       up->dll = quot & 0xff;
+       up->dlh = quot >> 8;
+       up->mdr1 = UART_OMAP_MDR1_DISABLE;
+
        up->fcr = UART_FCR_R_TRIG_01 | UART_FCR_T_TRIG_01 |
                        UART_FCR_ENABLE_FIFO;
        if (up->use_dma)
@@ -767,6 +769,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
                up->ier |= UART_IER_MSI;
        serial_out(up, UART_IER, up->ier);
        serial_out(up, UART_LCR, cval);         /* reset DLAB */
+       up->lcr = cval;
 
        /* FIFOs and DMA Settings */
 
@@ -793,17 +796,18 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
 
        if (up->use_dma) {
                serial_out(up, UART_TI752_TLR, 0);
-               serial_out(up, UART_OMAP_SCR,
-                       (UART_FCR_TRIGGER_4 | UART_FCR_TRIGGER_8));
+               up->scr |= (UART_FCR_TRIGGER_4 | UART_FCR_TRIGGER_8);
        }
 
+       serial_out(up, UART_OMAP_SCR, up->scr);
+
        serial_out(up, UART_EFR, up->efr);
        serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
        serial_out(up, UART_MCR, up->mcr);
 
        /* Protocol, Baud Rate, and Interrupt Settings */
 
-       serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE);
+       serial_out(up, UART_OMAP_MDR1, up->mdr1);
        serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
 
        up->efr = serial_in(up, UART_EFR);
@@ -813,8 +817,8 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
        serial_out(up, UART_IER, 0);
        serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
 
-       serial_out(up, UART_DLL, quot & 0xff);          /* LS of divisor */
-       serial_out(up, UART_DLM, quot >> 8);            /* MS of divisor */
+       serial_out(up, UART_DLL, up->dll);      /* LS of divisor */
+       serial_out(up, UART_DLM, up->dlh);      /* MS of divisor */
 
        serial_out(up, UART_LCR, 0);
        serial_out(up, UART_IER, up->ier);
@@ -824,9 +828,11 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
        serial_out(up, UART_LCR, cval);
 
        if (baud > 230400 && baud != 3000000)
-               serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_13X_MODE);
+               up->mdr1 = UART_OMAP_MDR1_13X_MODE;
        else
-               serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_16X_MODE);
+               up->mdr1 = UART_OMAP_MDR1_16X_MODE;
+
+       serial_out(up, UART_OMAP_MDR1, up->mdr1);
 
        /* Hardware Flow Control Configuration */
 
@@ -1416,15 +1422,18 @@ static void serial_omap_restore_context(struct uart_omap_port *up)
        serial_out(up, UART_LCR, 0x0); /* Operational mode */
        serial_out(up, UART_IER, 0x0);
        serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); /* Config B mode */
+       serial_out(up, UART_DLL, up->dll);
+       serial_out(up, UART_DLM, up->dlh);
        serial_out(up, UART_LCR, 0x0); /* Operational mode */
        serial_out(up, UART_IER, up->ier);
        serial_out(up, UART_FCR, up->fcr);
        serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
        serial_out(up, UART_MCR, up->mcr);
        serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); /* Config B mode */
+       serial_out(up, UART_OMAP_SCR, up->scr);
        serial_out(up, UART_EFR, up->efr);
        serial_out(up, UART_LCR, up->lcr);
-       serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_16X_MODE);
+       serial_out(up, UART_OMAP_MDR1, up->mdr1);
 }
 
 #ifdef CONFIG_PM_RUNTIME