Code cleanup.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
#define SD_SG32 0x00000008
#define SD_SZ_ALIGN 0x00000fff
+#define PCI_CFG_GPIO_SCS 0x10 /* PCI config space bit 4 for 4306c0 slow clock source */
+#define PCI_CFG_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal power-up */
+#define PCI_CFG_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL power-down */
+
+/* power control defines */
+#define PLL_DELAY 150 /* us pll on delay */
+#define FREF_DELAY 200 /* us fref change delay */
+#define XTAL_ON_DELAY 1000 /* us crystal power-on delay */
+
/* resetctrl */
#define AIRC_RESET 1
#define CST4330_CBUCK_POWER_OK 0x00004000
#define CST4330_BB_PLL_LOCKED 0x00008000
+/* Package IDs */
+#define BCM4329_289PIN_PKG_ID 0 /* 4329 289-pin package id */
+#define BCM4329_182PIN_PKG_ID 1 /* 4329N 182-pin package id */
+#define BCM4717_PKG_ID 9 /* 4717 package id */
+#define BCM4718_PKG_ID 10 /* 4718 package id */
+#define HDLSIM_PKG_ID 14 /* HDL simulator package id */
+#define HWSIM_PKG_ID 15 /* Hardware simulator package id */
+#define BCM43224_FAB_SMIC 0xa /* the chip is manufactured by SMIC */
+
+/* these are router chips */
+#define BCM4716_CHIP_ID 0x4716 /* 4716 chipcommon chipid */
+#define BCM47162_CHIP_ID 47162 /* 47162 chipcommon chipid */
+#define BCM4748_CHIP_ID 0x4748 /* 4716 chipcommon chipid (OTP, RBBU) */
+#define BCM5356_CHIP_ID 0x5356 /* 5356 chipcommon chipid */
+#define BCM5357_CHIP_ID 0x5357 /* 5357 chipcommon chipid */
+
+
#define SI_INFO(sih) ((si_info_t *)sih)
#define GOODCOREADDR(x, b) \
#define MAX_DMA_SEGS 4
+/* boardflags */
+#define BFL_PACTRL 0x00000002 /* Board has gpio 9 controlling the PA */
+#define BFL_NOPLLDOWN 0x00000020 /* Not ok to power down the chip pll and oscillator */
+#define BFL_FEM 0x00000800 /* Board supports the Front End Module */
+#define BFL_EXTLNA 0x00001000 /* Board has an external LNA in 2.4GHz band */
+#define BFL_NOPA 0x00010000 /* Board has no PA */
+#define BFL_BUCKBOOST 0x00200000 /* Power topology uses BUCKBOOST */
+#define BFL_FEM_BT 0x00400000 /* Board has FEM and switch to share antenna w/ BT */
+#define BFL_NOCBUCK 0x00800000 /* Power topology doesn't use CBUCK */
+#define BFL_PALDO 0x02000000 /* Power topology uses PALDO */
+#define BFL_EXTLNA_5GHz 0x10000000 /* Board has an external LNA in 5GHz band */
+
+/* boardflags2 */
+#define BFL2_RXBB_INT_REG_DIS 0x00000001 /* Board has an external rxbb regulator */
+#define BFL2_APLL_WAR 0x00000002 /* Flag to implement alternative A-band PLL settings */
+#define BFL2_TXPWRCTRL_EN 0x00000004 /* Board permits enabling TX Power Control */
+#define BFL2_2X4_DIV 0x00000008 /* Board supports the 2X4 diversity switch */
+#define BFL2_5G_PWRGAIN 0x00000010 /* Board supports 5G band power gain */
+#define BFL2_PCIEWAR_OVR 0x00000020 /* Board overrides ASPM and Clkreq settings */
+#define BFL2_LEGACY 0x00000080
+#define BFL2_SKWRKFEM_BRD 0x00000100 /* 4321mcm93 board uses Skyworks FEM */
+#define BFL2_SPUR_WAR 0x00000200 /* Board has a WAR for clock-harmonic spurs */
+#define BFL2_GPLL_WAR 0x00000400 /* Flag to narrow G-band PLL loop b/w */
+#define BFL2_SINGLEANT_CCK 0x00001000 /* Tx CCK pkts on Ant 0 only */
+#define BFL2_2G_SPUR_WAR 0x00002000 /* WAR to reduce and avoid clock-harmonic spurs in 2G */
+#define BFL2_GPLL_WAR2 0x00010000 /* Flag to widen G-band PLL loop b/w */
+#define BFL2_IPALVLSHIFT_3P3 0x00020000
+#define BFL2_INTERNDET_TXIQCAL 0x00040000 /* Use internal envelope detector for TX IQCAL */
+#define BFL2_XTALBUFOUTEN 0x00080000 /* Keep the buffered Xtal output from radio "ON"
+ * Most drivers will turn it off without this flag
+ * to save power.
+ */
+
+/* board specific GPIO assignment, gpio 0-3 are also customer-configurable led */
+#define BOARD_GPIO_PACTRL 0x200 /* bit 9 controls the PA on new 4306 boards */
+#define BOARD_GPIO_12 0x1000 /* gpio 12 */
+#define BOARD_GPIO_13 0x2000 /* gpio 13 */
+
#define BCMMSG(dev, fmt, args...) \
do { \
if (brcm_msg_level & LOG_TRACE_VAL) \
#define BCM4330_CHIP_ID 0x4330 /* 4330 chipcommon chipid */
#define BCM6362_CHIP_ID 0x6362 /* 6362 chipcommon chipid */
-/* these are router chips */
-#define BCM4716_CHIP_ID 0x4716 /* 4716 chipcommon chipid */
-#define BCM47162_CHIP_ID 47162 /* 47162 chipcommon chipid */
-#define BCM4748_CHIP_ID 0x4748 /* 4716 chipcommon chipid (OTP, RBBU) */
-#define BCM5356_CHIP_ID 0x5356 /* 5356 chipcommon chipid */
-#define BCM5357_CHIP_ID 0x5357 /* 5357 chipcommon chipid */
-
-/* Package IDs */
-#define BCM4329_289PIN_PKG_ID 0 /* 4329 289-pin package id */
-#define BCM4329_182PIN_PKG_ID 1 /* 4329N 182-pin package id */
-#define BCM4717_PKG_ID 9 /* 4717 package id */
-#define BCM4718_PKG_ID 10 /* 4718 package id */
-#define HDLSIM_PKG_ID 14 /* HDL simulator package id */
-#define HWSIM_PKG_ID 15 /* Hardware simulator package id */
-#define BCM43224_FAB_SMIC 0xa /* the chip is manufactured by SMIC */
-
-/* boardflags */
-#define BFL_PACTRL 0x00000002 /* Board has gpio 9 controlling the PA */
-#define BFL_NOPLLDOWN 0x00000020 /* Not ok to power down the chip pll and oscillator */
-#define BFL_FEM 0x00000800 /* Board supports the Front End Module */
-#define BFL_EXTLNA 0x00001000 /* Board has an external LNA in 2.4GHz band */
-#define BFL_NOPA 0x00010000 /* Board has no PA */
-#define BFL_BUCKBOOST 0x00200000 /* Power topology uses BUCKBOOST */
-#define BFL_FEM_BT 0x00400000 /* Board has FEM and switch to share antenna w/ BT */
-#define BFL_NOCBUCK 0x00800000 /* Power topology doesn't use CBUCK */
-#define BFL_PALDO 0x02000000 /* Power topology uses PALDO */
-#define BFL_EXTLNA_5GHz 0x10000000 /* Board has an external LNA in 5GHz band */
-
-/* boardflags2 */
-#define BFL2_RXBB_INT_REG_DIS 0x00000001 /* Board has an external rxbb regulator */
-#define BFL2_APLL_WAR 0x00000002 /* Flag to implement alternative A-band PLL settings */
-#define BFL2_TXPWRCTRL_EN 0x00000004 /* Board permits enabling TX Power Control */
-#define BFL2_2X4_DIV 0x00000008 /* Board supports the 2X4 diversity switch */
-#define BFL2_5G_PWRGAIN 0x00000010 /* Board supports 5G band power gain */
-#define BFL2_PCIEWAR_OVR 0x00000020 /* Board overrides ASPM and Clkreq settings */
-#define BFL2_LEGACY 0x00000080
-#define BFL2_SKWRKFEM_BRD 0x00000100 /* 4321mcm93 board uses Skyworks FEM */
-#define BFL2_SPUR_WAR 0x00000200 /* Board has a WAR for clock-harmonic spurs */
-#define BFL2_GPLL_WAR 0x00000400 /* Flag to narrow G-band PLL loop b/w */
-#define BFL2_SINGLEANT_CCK 0x00001000 /* Tx CCK pkts on Ant 0 only */
-#define BFL2_2G_SPUR_WAR 0x00002000 /* WAR to reduce and avoid clock-harmonic spurs in 2G */
-#define BFL2_GPLL_WAR2 0x00010000 /* Flag to widen G-band PLL loop b/w */
-#define BFL2_IPALVLSHIFT_3P3 0x00020000
-#define BFL2_INTERNDET_TXIQCAL 0x00040000 /* Use internal envelope detector for TX IQCAL */
-#define BFL2_XTALBUFOUTEN 0x00080000 /* Keep the buffered Xtal output from radio "ON"
- * Most drivers will turn it off without this flag
- * to save power.
- */
-
-/* board specific GPIO assignment, gpio 0-3 are also customer-configurable led */
-#define BOARD_GPIO_PACTRL 0x200 /* bit 9 controls the PA on new 4306 boards */
-#define BOARD_GPIO_12 0x1000 /* gpio 12 */
-#define BOARD_GPIO_13 0x2000 /* gpio 13 */
-
-#define PCI_CFG_GPIO_SCS 0x10 /* PCI config space bit 4 for 4306c0 slow clock source */
-#define PCI_CFG_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal power-up */
-#define PCI_CFG_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL power-down */
-
-/* power control defines */
-#define PLL_DELAY 150 /* us pll on delay */
-#define FREF_DELAY 200 /* us fref change delay */
-#define XTAL_ON_DELAY 1000 /* us crystal power-on delay */
-
-/* Reference board types */
-#define SPI_BOARD 0x0402
-
#endif /* _BRCM_HW_IDS_H_ */
projects / linux-beck.git / commitdiff