--- /dev/null
+snd-usb-6fire-objs += chip.o comm.o midi.o control.o firmware.o pcm.o
+obj-$(CONFIG_SND_USB_6FIRE) += snd-usb-6fire.o
+
--- /dev/null
+/*
+ * Linux driver for TerraTec DMX 6Fire USB
+ *
+ * Main routines and module definitions.
+ *
+ * Author: Torsten Schenk <torsten.schenk@zoho.com>
+ * Created: Jan 01, 2011
+ * Version: 0.3.0
+ * Copyright: (C) Torsten Schenk
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include "chip.h"
+#include "firmware.h"
+#include "pcm.h"
+#include "control.h"
+#include "comm.h"
+#include "midi.h"
+
+#include <linux/moduleparam.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/gfp.h>
+#include <sound/initval.h>
+
+MODULE_AUTHOR("Torsten Schenk <torsten.schenk@zoho.com>");
+MODULE_DESCRIPTION("TerraTec DMX 6Fire USB audio driver, version 0.3.0");
+MODULE_LICENSE("GPL v2");
+MODULE_SUPPORTED_DEVICE("{{TerraTec, DMX 6Fire USB}}");
+
+static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-max */
+static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* Id for card */
+static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; /* Enable card */
+static struct sfire_chip *chips[SNDRV_CARDS] = SNDRV_DEFAULT_PTR;
+static struct usb_device *devices[SNDRV_CARDS] = SNDRV_DEFAULT_PTR;
+
+module_param_array(index, int, NULL, 0444);
+MODULE_PARM_DESC(index, "Index value for the 6fire sound device");
+module_param_array(id, charp, NULL, 0444);
+MODULE_PARM_DESC(id, "ID string for the 6fire sound device.");
+module_param_array(enable, bool, NULL, 0444);
+MODULE_PARM_DESC(enable, "Enable the 6fire sound device.");
+
+static DEFINE_MUTEX(register_mutex);
+
+static void usb6fire_chip_abort(struct sfire_chip *chip)
+{
+ if (chip) {
+ if (chip->pcm)
+ usb6fire_pcm_abort(chip);
+ if (chip->midi)
+ usb6fire_midi_abort(chip);
+ if (chip->comm)
+ usb6fire_comm_abort(chip);
+ if (chip->control)
+ usb6fire_control_abort(chip);
+ if (chip->card) {
+ snd_card_disconnect(chip->card);
+ snd_card_free_when_closed(chip->card);
+ chip->card = NULL;
+ }
+ }
+}
+
+static void usb6fire_chip_destroy(struct sfire_chip *chip)
+{
+ if (chip) {
+ if (chip->pcm)
+ usb6fire_pcm_destroy(chip);
+ if (chip->midi)
+ usb6fire_midi_destroy(chip);
+ if (chip->comm)
+ usb6fire_comm_destroy(chip);
+ if (chip->control)
+ usb6fire_control_destroy(chip);
+ if (chip->card)
+ snd_card_free(chip->card);
+ }
+}
+
+static int __devinit usb6fire_chip_probe(struct usb_interface *intf,
+ const struct usb_device_id *usb_id)
+{
+ int ret;
+ int i;
+ struct sfire_chip *chip = NULL;
+ struct usb_device *device = interface_to_usbdev(intf);
+ int regidx = -1; /* index in module parameter array */
+ struct snd_card *card = NULL;
+
+ /* look if we already serve this card and return if so */
+ mutex_lock(®ister_mutex);
+ for (i = 0; i < SNDRV_CARDS; i++) {
+ if (devices[i] == device) {
+ if (chips[i])
+ chips[i]->intf_count++;
+ usb_set_intfdata(intf, chips[i]);
+ mutex_unlock(®ister_mutex);
+ return 0;
+ } else if (regidx < 0)
+ regidx = i;
+ }
+ if (regidx < 0) {
+ mutex_unlock(®ister_mutex);
+ snd_printk(KERN_ERR PREFIX "too many cards registered.\n");
+ return -ENODEV;
+ }
+ devices[regidx] = device;
+ mutex_unlock(®ister_mutex);
+
+ /* check, if firmware is present on device, upload it if not */
+ ret = usb6fire_fw_init(intf);
+ if (ret < 0)
+ return ret;
+ else if (ret == FW_NOT_READY) /* firmware update performed */
+ return 0;
+
+ /* if we are here, card can be registered in alsa. */
+ if (usb_set_interface(device, 0, 0) != 0) {
+ snd_printk(KERN_ERR PREFIX "can't set first interface.\n");
+ return -EIO;
+ }
+ ret = snd_card_create(index[regidx], id[regidx], THIS_MODULE,
+ sizeof(struct sfire_chip), &card);
+ if (ret < 0) {
+ snd_printk(KERN_ERR PREFIX "cannot create alsa card.\n");
+ return ret;
+ }
+ strcpy(card->driver, "6FireUSB");
+ strcpy(card->shortname, "TerraTec DMX6FireUSB");
+ sprintf(card->longname, "%s at %d:%d", card->shortname,
+ device->bus->busnum, device->devnum);
+ snd_card_set_dev(card, &intf->dev);
+
+ chip = card->private_data;
+ chips[regidx] = chip;
+ chip->dev = device;
+ chip->regidx = regidx;
+ chip->intf_count = 1;
+ chip->card = card;
+
+ ret = usb6fire_comm_init(chip);
+ if (ret < 0) {
+ usb6fire_chip_destroy(chip);
+ return ret;
+ }
+
+ ret = usb6fire_midi_init(chip);
+ if (ret < 0) {
+ usb6fire_chip_destroy(chip);
+ return ret;
+ }
+
+ ret = usb6fire_pcm_init(chip);
+ if (ret < 0) {
+ usb6fire_chip_destroy(chip);
+ return ret;
+ }
+
+ ret = usb6fire_control_init(chip);
+ if (ret < 0) {
+ usb6fire_chip_destroy(chip);
+ return ret;
+ }
+
+ ret = snd_card_register(card);
+ if (ret < 0) {
+ snd_printk(KERN_ERR PREFIX "cannot register card.");
+ usb6fire_chip_destroy(chip);
+ return ret;
+ }
+ usb_set_intfdata(intf, chip);
+ return 0;
+}
+
+static void usb6fire_chip_disconnect(struct usb_interface *intf)
+{
+ struct sfire_chip *chip;
+ struct snd_card *card;
+
+ chip = usb_get_intfdata(intf);
+ if (chip) { /* if !chip, fw upload has been performed */
+ card = chip->card;
+ chip->intf_count--;
+ if (!chip->intf_count) {
+ mutex_lock(®ister_mutex);
+ devices[chip->regidx] = NULL;
+ chips[chip->regidx] = NULL;
+ mutex_unlock(®ister_mutex);
+
+ chip->shutdown = true;
+ usb6fire_chip_abort(chip);
+ usb6fire_chip_destroy(chip);
+ }
+ }
+}
+
+static struct usb_device_id device_table[] = {
+ {
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x0ccd,
+ .idProduct = 0x0080
+ },
+ {}
+};
+
+MODULE_DEVICE_TABLE(usb, device_table);
+
+static struct usb_driver driver = {
+ .name = "snd-usb-6fire",
+ .probe = usb6fire_chip_probe,
+ .disconnect = usb6fire_chip_disconnect,
+ .id_table = device_table,
+};
+
+static int __init usb6fire_chip_init(void)
+{
+ return usb_register(&driver);
+}
+
+static void __exit usb6fire_chip_cleanup(void)
+{
+ usb_deregister(&driver);
+}
+
+module_init(usb6fire_chip_init);
+module_exit(usb6fire_chip_cleanup);
--- /dev/null
+/*
+ * Linux driver for TerraTec DMX 6Fire USB
+ *
+ * Author: Torsten Schenk <torsten.schenk@zoho.com>
+ * Created: Jan 01, 2011
+ * Version: 0.3.0
+ * Copyright: (C) Torsten Schenk
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef USB6FIRE_CHIP_H
+#define USB6FIRE_CHIP_H
+
+#include "common.h"
+
+struct sfire_chip {
+ struct usb_device *dev;
+ struct snd_card *card;
+ int intf_count; /* number of registered interfaces */
+ int regidx; /* index in module parameter arrays */
+ bool shutdown;
+
+ struct midi_runtime *midi;
+ struct pcm_runtime *pcm;
+ struct control_runtime *control;
+ struct comm_runtime *comm;
+};
+#endif /* USB6FIRE_CHIP_H */
+
--- /dev/null
+/*
+ * Linux driver for TerraTec DMX 6Fire USB
+ *
+ * Device communications
+ *
+ * Author: Torsten Schenk <torsten.schenk@zoho.com>
+ * Created: Jan 01, 2011
+ * Version: 0.3.0
+ * Copyright: (C) Torsten Schenk
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include "comm.h"
+#include "chip.h"
+#include "midi.h"
+
+enum {
+ COMM_EP = 1,
+ COMM_FPGA_EP = 2
+};
+
+static void usb6fire_comm_init_urb(struct comm_runtime *rt, struct urb *urb,
+ u8 *buffer, void *context, void(*handler)(struct urb *urb))
+{
+ usb_init_urb(urb);
+ urb->transfer_buffer = buffer;
+ urb->pipe = usb_sndintpipe(rt->chip->dev, COMM_EP);
+ urb->complete = handler;
+ urb->context = context;
+ urb->interval = 1;
+ urb->dev = rt->chip->dev;
+}
+
+static void usb6fire_comm_receiver_handler(struct urb *urb)
+{
+ struct comm_runtime *rt = urb->context;
+ struct midi_runtime *midi_rt = rt->chip->midi;
+
+ if (!urb->status) {
+ if (rt->receiver_buffer[0] == 0x10) /* midi in event */
+ if (midi_rt)
+ midi_rt->in_received(midi_rt,
+ rt->receiver_buffer + 2,
+ rt->receiver_buffer[1]);
+ }
+
+ if (!rt->chip->shutdown) {
+ urb->status = 0;
+ urb->actual_length = 0;
+ if (usb_submit_urb(urb, GFP_ATOMIC) < 0)
+ snd_printk(KERN_WARNING PREFIX
+ "comm data receiver aborted.\n");
+ }
+}
+
+static void usb6fire_comm_init_buffer(u8 *buffer, u8 id, u8 request,
+ u8 reg, u8 vl, u8 vh)
+{
+ buffer[0] = 0x01;
+ buffer[2] = request;
+ buffer[3] = id;
+ switch (request) {
+ case 0x02:
+ buffer[1] = 0x05; /* length (starting at buffer[2]) */
+ buffer[4] = reg;
+ buffer[5] = vl;
+ buffer[6] = vh;
+ break;
+
+ case 0x12:
+ buffer[1] = 0x0b; /* length (starting at buffer[2]) */
+ buffer[4] = 0x00;
+ buffer[5] = 0x18;
+ buffer[6] = 0x05;
+ buffer[7] = 0x00;
+ buffer[8] = 0x01;
+ buffer[9] = 0x00;
+ buffer[10] = 0x9e;
+ buffer[11] = reg;
+ buffer[12] = vl;
+ break;
+
+ case 0x20:
+ case 0x21:
+ case 0x22:
+ buffer[1] = 0x04;
+ buffer[4] = reg;
+ buffer[5] = vl;
+ break;
+ }
+}
+
+static int usb6fire_comm_send_buffer(u8 *buffer, struct usb_device *dev)
+{
+ int ret;
+ int actual_len;
+
+ ret = usb_interrupt_msg(dev, usb_sndintpipe(dev, COMM_EP),
+ buffer, buffer[1] + 2, &actual_len, HZ);
+ if (ret < 0)
+ return ret;
+ else if (actual_len != buffer[1] + 2)
+ return -EIO;
+ return 0;
+}
+
+static int usb6fire_comm_write8(struct comm_runtime *rt, u8 request,
+ u8 reg, u8 value)
+{
+ u8 buffer[13]; /* 13: maximum length of message */
+
+ usb6fire_comm_init_buffer(buffer, 0x00, request, reg, value, 0x00);
+ return usb6fire_comm_send_buffer(buffer, rt->chip->dev);
+}
+
+static int usb6fire_comm_write16(struct comm_runtime *rt, u8 request,
+ u8 reg, u8 vl, u8 vh)
+{
+ u8 buffer[13]; /* 13: maximum length of message */
+
+ usb6fire_comm_init_buffer(buffer, 0x00, request, reg, vl, vh);
+ return usb6fire_comm_send_buffer(buffer, rt->chip->dev);
+}
+
+int __devinit usb6fire_comm_init(struct sfire_chip *chip)
+{
+ struct comm_runtime *rt = kzalloc(sizeof(struct comm_runtime),
+ GFP_KERNEL);
+ struct urb *urb = &rt->receiver;
+ int ret;
+
+ if (!rt)
+ return -ENOMEM;
+
+ rt->serial = 1;
+ rt->chip = chip;
+ usb_init_urb(urb);
+ rt->init_urb = usb6fire_comm_init_urb;
+ rt->write8 = usb6fire_comm_write8;
+ rt->write16 = usb6fire_comm_write16;
+
+ /* submit an urb that receives communication data from device */
+ urb->transfer_buffer = rt->receiver_buffer;
+ urb->transfer_buffer_length = COMM_RECEIVER_BUFSIZE;
+ urb->pipe = usb_rcvintpipe(chip->dev, COMM_EP);
+ urb->dev = chip->dev;
+ urb->complete = usb6fire_comm_receiver_handler;
+ urb->context = rt;
+ urb->interval = 1;
+ ret = usb_submit_urb(urb, GFP_KERNEL);
+ if (ret < 0) {
+ kfree(rt);
+ snd_printk(KERN_ERR PREFIX "cannot create comm data receiver.");
+ return ret;
+ }
+ chip->comm = rt;
+ return 0;
+}
+
+void usb6fire_comm_abort(struct sfire_chip *chip)
+{
+ struct comm_runtime *rt = chip->comm;
+
+ if (rt)
+ usb_poison_urb(&rt->receiver);
+}
+
+void usb6fire_comm_destroy(struct sfire_chip *chip)
+{
+ kfree(chip->comm);
+ chip->comm = NULL;
+}
--- /dev/null
+/*
+ * Linux driver for TerraTec DMX 6Fire USB
+ *
+ * Author: Torsten Schenk <torsten.schenk@zoho.com>
+ * Created: Jan 01, 2011
+ * Version: 0.3.0
+ * Copyright: (C) Torsten Schenk
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef USB6FIRE_COMM_H
+#define USB6FIRE_COMM_H
+
+#include "common.h"
+
+enum /* settings for comm */
+{
+ COMM_RECEIVER_BUFSIZE = 64,
+};
+
+struct comm_runtime {
+ struct sfire_chip *chip;
+
+ struct urb receiver;
+ u8 receiver_buffer[COMM_RECEIVER_BUFSIZE];
+
+ u8 serial; /* urb serial */
+
+ void (*init_urb)(struct comm_runtime *rt, struct urb *urb, u8 *buffer,
+ void *context, void(*handler)(struct urb *urb));
+ /* writes control data to the device */
+ int (*write8)(struct comm_runtime *rt, u8 request, u8 reg, u8 value);
+ int (*write16)(struct comm_runtime *rt, u8 request, u8 reg,
+ u8 vh, u8 vl);
+};
+
+int __devinit usb6fire_comm_init(struct sfire_chip *chip);
+void usb6fire_comm_abort(struct sfire_chip *chip);
+void usb6fire_comm_destroy(struct sfire_chip *chip);
+#endif /* USB6FIRE_COMM_H */
+
--- /dev/null
+/*
+ * Linux driver for TerraTec DMX 6Fire USB
+ *
+ * Author: Torsten Schenk <torsten.schenk@zoho.com>
+ * Created: Jan 01, 2011
+ * Version: 0.3.0
+ * Copyright: (C) Torsten Schenk
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef USB6FIRE_COMMON_H
+#define USB6FIRE_COMMON_H
+
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <sound/core.h>
+
+#define PREFIX "6fire: "
+
+struct sfire_chip;
+struct midi_runtime;
+struct pcm_runtime;
+struct control_runtime;
+struct comm_runtime;
+#endif /* USB6FIRE_COMMON_H */
+
--- /dev/null
+/*
+ * Linux driver for TerraTec DMX 6Fire USB
+ *
+ * Mixer control
+ *
+ * Author: Torsten Schenk <torsten.schenk@zoho.com>
+ * Created: Jan 01, 2011
+ * Version: 0.3.0
+ * Copyright: (C) Torsten Schenk
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/interrupt.h>
+#include <sound/control.h>
+
+#include "control.h"
+#include "comm.h"
+#include "chip.h"
+
+static char *opt_coax_texts[2] = { "Optical", "Coax" };
+static char *line_phono_texts[2] = { "Line", "Phono" };
+
+/*
+ * calculated with $value\[i\] = 128 \cdot sqrt[3]{\frac{i}{128}}$
+ * this is done because the linear values cause rapid degredation
+ * of volume in the uppermost region.
+ */
+static const u8 log_volume_table[128] = {
+ 0x00, 0x19, 0x20, 0x24, 0x28, 0x2b, 0x2e, 0x30, 0x32, 0x34,
+ 0x36, 0x38, 0x3a, 0x3b, 0x3d, 0x3e, 0x40, 0x41, 0x42, 0x43,
+ 0x44, 0x46, 0x47, 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e,
+ 0x4e, 0x4f, 0x50, 0x51, 0x52, 0x53, 0x53, 0x54, 0x55, 0x56,
+ 0x56, 0x57, 0x58, 0x58, 0x59, 0x5a, 0x5b, 0x5b, 0x5c, 0x5c,
+ 0x5d, 0x5e, 0x5e, 0x5f, 0x60, 0x60, 0x61, 0x61, 0x62, 0x62,
+ 0x63, 0x63, 0x64, 0x65, 0x65, 0x66, 0x66, 0x67, 0x67, 0x68,
+ 0x68, 0x69, 0x69, 0x6a, 0x6a, 0x6b, 0x6b, 0x6c, 0x6c, 0x6c,
+ 0x6d, 0x6d, 0x6e, 0x6e, 0x6f, 0x6f, 0x70, 0x70, 0x70, 0x71,
+ 0x71, 0x72, 0x72, 0x73, 0x73, 0x73, 0x74, 0x74, 0x75, 0x75,
+ 0x75, 0x76, 0x76, 0x77, 0x77, 0x77, 0x78, 0x78, 0x78, 0x79,
+ 0x79, 0x7a, 0x7a, 0x7a, 0x7b, 0x7b, 0x7b, 0x7c, 0x7c, 0x7c,
+ 0x7d, 0x7d, 0x7d, 0x7e, 0x7e, 0x7e, 0x7f, 0x7f };
+
+/*
+ * data that needs to be sent to device. sets up card internal stuff.
+ * values dumped from windows driver and filtered by trial'n'error.
+ */
+static const struct {
+ u8 type;
+ u8 reg;
+ u8 value;
+}
+init_data[] = {
+ { 0x22, 0x00, 0x00 }, { 0x20, 0x00, 0x08 }, { 0x22, 0x01, 0x01 },
+ { 0x20, 0x01, 0x08 }, { 0x22, 0x02, 0x00 }, { 0x20, 0x02, 0x08 },
+ { 0x22, 0x03, 0x00 }, { 0x20, 0x03, 0x08 }, { 0x22, 0x04, 0x00 },
+ { 0x20, 0x04, 0x08 }, { 0x22, 0x05, 0x01 }, { 0x20, 0x05, 0x08 },
+ { 0x22, 0x04, 0x01 }, { 0x12, 0x04, 0x00 }, { 0x12, 0x05, 0x00 },
+ { 0x12, 0x0d, 0x78 }, { 0x12, 0x21, 0x82 }, { 0x12, 0x22, 0x80 },
+ { 0x12, 0x23, 0x00 }, { 0x12, 0x06, 0x02 }, { 0x12, 0x03, 0x00 },
+ { 0x12, 0x02, 0x00 }, { 0x22, 0x03, 0x01 },
+ { 0 } /* TERMINATING ENTRY */
+};
+
+static void usb6fire_control_master_vol_update(struct control_runtime *rt)
+{
+ struct comm_runtime *comm_rt = rt->chip->comm;
+ if (comm_rt) {
+ /* set volume */
+ comm_rt->write8(comm_rt, 0x12, 0x0f, 0x7f -
+ log_volume_table[rt->master_vol]);
+ /* unmute */
+ comm_rt->write8(comm_rt, 0x12, 0x0e, 0x00);
+ }
+}
+
+static void usb6fire_control_line_phono_update(struct control_runtime *rt)
+{
+ struct comm_runtime *comm_rt = rt->chip->comm;
+ if (comm_rt) {
+ comm_rt->write8(comm_rt, 0x22, 0x02, rt->line_phono_switch);
+ comm_rt->write8(comm_rt, 0x21, 0x02, rt->line_phono_switch);
+ }
+}
+
+static void usb6fire_control_opt_coax_update(struct control_runtime *rt)
+{
+ struct comm_runtime *comm_rt = rt->chip->comm;
+ if (comm_rt) {
+ comm_rt->write8(comm_rt, 0x22, 0x00, rt->opt_coax_switch);
+ comm_rt->write8(comm_rt, 0x21, 0x00, rt->opt_coax_switch);
+ }
+}
+
+static int usb6fire_control_master_vol_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 1;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 127;
+ return 0;
+}
+
+static int usb6fire_control_master_vol_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct control_runtime *rt = snd_kcontrol_chip(kcontrol);
+ int changed = 0;
+ if (rt->master_vol != ucontrol->value.integer.value[0]) {
+ rt->master_vol = ucontrol->value.integer.value[0];
+ usb6fire_control_master_vol_update(rt);
+ changed = 1;
+ }
+ return changed;
+}
+
+static int usb6fire_control_master_vol_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct control_runtime *rt = snd_kcontrol_chip(kcontrol);
+ ucontrol->value.integer.value[0] = rt->master_vol;
+ return 0;
+}
+
+static int usb6fire_control_line_phono_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+ uinfo->count = 1;
+ uinfo->value.enumerated.items = 2;
+ if (uinfo->value.enumerated.item > 1)
+ uinfo->value.enumerated.item = 1;
+ strcpy(uinfo->value.enumerated.name,
+ line_phono_texts[uinfo->value.enumerated.item]);
+ return 0;
+}
+
+static int usb6fire_control_line_phono_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct control_runtime *rt = snd_kcontrol_chip(kcontrol);
+ int changed = 0;
+ if (rt->line_phono_switch != ucontrol->value.integer.value[0]) {
+ rt->line_phono_switch = ucontrol->value.integer.value[0];
+ usb6fire_control_line_phono_update(rt);
+ changed = 1;
+ }
+ return changed;
+}
+
+static int usb6fire_control_line_phono_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct control_runtime *rt = snd_kcontrol_chip(kcontrol);
+ ucontrol->value.integer.value[0] = rt->line_phono_switch;
+ return 0;
+}
+
+static int usb6fire_control_opt_coax_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+ uinfo->count = 1;
+ uinfo->value.enumerated.items = 2;
+ if (uinfo->value.enumerated.item > 1)
+ uinfo->value.enumerated.item = 1;
+ strcpy(uinfo->value.enumerated.name,
+ opt_coax_texts[uinfo->value.enumerated.item]);
+ return 0;
+}
+
+static int usb6fire_control_opt_coax_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct control_runtime *rt = snd_kcontrol_chip(kcontrol);
+ int changed = 0;
+
+ if (rt->opt_coax_switch != ucontrol->value.enumerated.item[0]) {
+ rt->opt_coax_switch = ucontrol->value.enumerated.item[0];
+ usb6fire_control_opt_coax_update(rt);
+ changed = 1;
+ }
+ return changed;
+}
+
+static int usb6fire_control_opt_coax_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct control_runtime *rt = snd_kcontrol_chip(kcontrol);
+ ucontrol->value.enumerated.item[0] = rt->opt_coax_switch;
+ return 0;
+}
+
+static struct __devinitdata snd_kcontrol_new elements[] = {
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Master Playback Volume",
+ .index = 0,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .info = usb6fire_control_master_vol_info,
+ .get = usb6fire_control_master_vol_get,
+ .put = usb6fire_control_master_vol_put
+ },
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Line/Phono Capture Route",
+ .index = 0,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .info = usb6fire_control_line_phono_info,
+ .get = usb6fire_control_line_phono_get,
+ .put = usb6fire_control_line_phono_put
+ },
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Opt/Coax Capture Route",
+ .index = 0,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .info = usb6fire_control_opt_coax_info,
+ .get = usb6fire_control_opt_coax_get,
+ .put = usb6fire_control_opt_coax_put
+ },
+ {}
+};
+
+int __devinit usb6fire_control_init(struct sfire_chip *chip)
+{
+ int i;
+ int ret;
+ struct control_runtime *rt = kzalloc(sizeof(struct control_runtime),
+ GFP_KERNEL);
+ struct comm_runtime *comm_rt = chip->comm;
+
+ if (!rt)
+ return -ENOMEM;
+
+ rt->chip = chip;
+
+ i = 0;
+ while (init_data[i].type) {
+ comm_rt->write8(comm_rt, init_data[i].type, init_data[i].reg,
+ init_data[i].value);
+ i++;
+ }
+
+ usb6fire_control_opt_coax_update(rt);
+ usb6fire_control_line_phono_update(rt);
+ usb6fire_control_master_vol_update(rt);
+
+ i = 0;
+ while (elements[i].name) {
+ ret = snd_ctl_add(chip->card, snd_ctl_new1(&elements[i], rt));
+ if (ret < 0) {
+ kfree(rt);
+ snd_printk(KERN_ERR PREFIX "cannot add control.\n");
+ return ret;
+ }
+ i++;
+ }
+
+ chip->control = rt;
+ return 0;
+}
+
+void usb6fire_control_abort(struct sfire_chip *chip)
+{}
+
+void usb6fire_control_destroy(struct sfire_chip *chip)
+{
+ kfree(chip->control);
+ chip->control = NULL;
+}
--- /dev/null
+/*
+ * Linux driver for TerraTec DMX 6Fire USB
+ *
+ * Author: Torsten Schenk <torsten.schenk@zoho.com>
+ * Created: Jan 01, 2011
+ * Version: 0.3.0
+ * Copyright: (C) Torsten Schenk
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef USB6FIRE_CONTROL_H
+#define USB6FIRE_CONTROL_H
+
+#include "common.h"
+
+enum {
+ CONTROL_MAX_ELEMENTS = 32
+};
+
+struct control_runtime {
+ struct sfire_chip *chip;
+
+ struct snd_kcontrol *element[CONTROL_MAX_ELEMENTS];
+ bool opt_coax_switch;
+ bool line_phono_switch;
+ u8 master_vol;
+};
+
+int __devinit usb6fire_control_init(struct sfire_chip *chip);
+void usb6fire_control_abort(struct sfire_chip *chip);
+void usb6fire_control_destroy(struct sfire_chip *chip);
+#endif /* USB6FIRE_CONTROL_H */
+
--- /dev/null
+/*
+ * Linux driver for TerraTec DMX 6Fire USB
+ *
+ * Firmware loader
+ *
+ * Currently not working for all devices. To be able to use the device
+ * in linux, it is also possible to let the windows driver upload the firmware.
+ * For that, start the computer in windows and reboot.
+ * As long as the device is connected to the power supply, no firmware reload
+ * needs to be performed.
+ *
+ * Author: Torsten Schenk <torsten.schenk@zoho.com>
+ * Created: Jan 01, 2011
+ * Version: 0.3.0
+ * Copyright: (C) Torsten Schenk
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/firmware.h>
+
+#include "firmware.h"
+#include "chip.h"
+
+MODULE_FIRMWARE("6fire/dmx6firel2.ihx");
+MODULE_FIRMWARE("6fire/dmx6fireap.ihx");
+MODULE_FIRMWARE("6fire/dmx6firecf.bin");
+
+enum {
+ FPGA_BUFSIZE = 512, FPGA_EP = 2
+};
+
+static const u8 BIT_REVERSE_TABLE[256] = {
+ 0x00, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0, 0x10, 0x90, 0x50,
+ 0xd0, 0x30, 0xb0, 0x70, 0xf0, 0x08, 0x88, 0x48, 0xc8, 0x28, 0xa8,
+ 0x68, 0xe8, 0x18, 0x98, 0x58, 0xd8, 0x38, 0xb8, 0x78, 0xf8, 0x04,
+ 0x84, 0x44, 0xc4, 0x24, 0xa4, 0x64, 0xe4, 0x14, 0x94, 0x54, 0xd4,
+ 0x34, 0xb4, 0x74, 0xf4, 0x0c, 0x8c, 0x4c, 0xcc, 0x2c, 0xac, 0x6c,
+ 0xec, 0x1c, 0x9c, 0x5c, 0xdc, 0x3c, 0xbc, 0x7c, 0xfc, 0x02, 0x82,
+ 0x42, 0xc2, 0x22, 0xa2, 0x62, 0xe2, 0x12, 0x92, 0x52, 0xd2, 0x32,
+ 0xb2, 0x72, 0xf2, 0x0a, 0x8a, 0x4a, 0xca, 0x2a, 0xaa, 0x6a, 0xea,
+ 0x1a, 0x9a, 0x5a, 0xda, 0x3a, 0xba, 0x7a, 0xfa, 0x06, 0x86, 0x46,
+ 0xc6, 0x26, 0xa6, 0x66, 0xe6, 0x16, 0x96, 0x56, 0xd6, 0x36, 0xb6,
+ 0x76, 0xf6, 0x0e, 0x8e, 0x4e, 0xce, 0x2e, 0xae, 0x6e, 0xee, 0x1e,
+ 0x9e, 0x5e, 0xde, 0x3e, 0xbe, 0x7e, 0xfe, 0x01, 0x81, 0x41, 0xc1,
+ 0x21, 0xa1, 0x61, 0xe1, 0x11, 0x91, 0x51, 0xd1, 0x31, 0xb1, 0x71,
+ 0xf1, 0x09, 0x89, 0x49, 0xc9, 0x29, 0xa9, 0x69, 0xe9, 0x19, 0x99,
+ 0x59, 0xd9, 0x39, 0xb9, 0x79, 0xf9, 0x05, 0x85, 0x45, 0xc5, 0x25,
+ 0xa5, 0x65, 0xe5, 0x15, 0x95, 0x55, 0xd5, 0x35, 0xb5, 0x75, 0xf5,
+ 0x0d, 0x8d, 0x4d, 0xcd, 0x2d, 0xad, 0x6d, 0xed, 0x1d, 0x9d, 0x5d,
+ 0xdd, 0x3d, 0xbd, 0x7d, 0xfd, 0x03, 0x83, 0x43, 0xc3, 0x23, 0xa3,
+ 0x63, 0xe3, 0x13, 0x93, 0x53, 0xd3, 0x33, 0xb3, 0x73, 0xf3, 0x0b,
+ 0x8b, 0x4b, 0xcb, 0x2b, 0xab, 0x6b, 0xeb, 0x1b, 0x9b, 0x5b, 0xdb,
+ 0x3b, 0xbb, 0x7b, 0xfb, 0x07, 0x87, 0x47, 0xc7, 0x27, 0xa7, 0x67,
+ 0xe7, 0x17, 0x97, 0x57, 0xd7, 0x37, 0xb7, 0x77, 0xf7, 0x0f, 0x8f,
+ 0x4f, 0xcf, 0x2f, 0xaf, 0x6f, 0xef, 0x1f, 0x9f, 0x5f, 0xdf, 0x3f,
+ 0xbf, 0x7f, 0xff };
+
+/*
+ * wMaxPacketSize of pcm endpoints.
+ * keep synced with rates_in_packet_size and rates_out_packet_size in pcm.c
+ * fpp: frames per isopacket
+ *
+ * CAUTION: keep sizeof <= buffer[] in usb6fire_fw_init
+ */
+static const u8 ep_w_max_packet_size[] = {
+ 0xe4, 0x00, 0xe4, 0x00, /* alt 1: 228 EP2 and EP6 (7 fpp) */
+ 0xa4, 0x01, 0xa4, 0x01, /* alt 2: 420 EP2 and EP6 (13 fpp)*/
+ 0x94, 0x01, 0x5c, 0x02 /* alt 3: 404 EP2 and 604 EP6 (25 fpp) */
+};
+
+struct ihex_record {
+ u16 address;
+ u8 len;
+ u8 data[256];
+ char error; /* true if an error occured parsing this record */
+
+ u8 max_len; /* maximum record length in whole ihex */
+
+ /* private */
+ const char *txt_data;
+ unsigned int txt_length;
+ unsigned int txt_offset; /* current position in txt_data */
+};
+
+static u8 usb6fire_fw_ihex_nibble(const u8 n)
+{
+ if (n >= '0' && n <= '9')
+ return n - '0';
+ else if (n >= 'A' && n <= 'F')
+ return n - ('A' - 10);
+ else if (n >= 'a' && n <= 'f')
+ return n - ('a' - 10);
+ return 0;
+}
+
+static u8 usb6fire_fw_ihex_hex(const u8 *data, u8 *crc)
+{
+ u8 val = (usb6fire_fw_ihex_nibble(data[0]) << 4) |
+ usb6fire_fw_ihex_nibble(data[1]);
+ *crc += val;
+ return val;
+}
+
+/*
+ * returns true if record is available, false otherwise.
+ * iff an error occured, false will be returned and record->error will be true.
+ */
+static bool usb6fire_fw_ihex_next_record(struct ihex_record *record)
+{
+ u8 crc = 0;
+ u8 type;
+ int i;
+
+ record->error = false;
+
+ /* find begin of record (marked by a colon) */
+ while (record->txt_offset < record->txt_length
+ && record->txt_data[record->txt_offset] != ':')
+ record->txt_offset++;
+ if (record->txt_offset == record->txt_length)
+ return false;
+
+ /* number of characters needed for len, addr and type entries */
+ record->txt_offset++;
+ if (record->txt_offset + 8 > record->txt_length) {
+ record->error = true;
+ return false;
+ }
+
+ record->len = usb6fire_fw_ihex_hex(record->txt_data +
+ record->txt_offset, &crc);
+ record->txt_offset += 2;
+ record->address = usb6fire_fw_ihex_hex(record->txt_data +
+ record->txt_offset, &crc) << 8;
+ record->txt_offset += 2;
+ record->address |= usb6fire_fw_ihex_hex(record->txt_data +
+ record->txt_offset, &crc);
+ record->txt_offset += 2;
+ type = usb6fire_fw_ihex_hex(record->txt_data +
+ record->txt_offset, &crc);
+ record->txt_offset += 2;
+
+ /* number of characters needed for data and crc entries */
+ if (record->txt_offset + 2 * (record->len + 1) > record->txt_length) {
+ record->error = true;
+ return false;
+ }
+ for (i = 0; i < record->len; i++) {
+ record->data[i] = usb6fire_fw_ihex_hex(record->txt_data
+ + record->txt_offset, &crc);
+ record->txt_offset += 2;
+ }
+ usb6fire_fw_ihex_hex(record->txt_data + record->txt_offset, &crc);
+ if (crc) {
+ record->error = true;
+ return false;
+ }
+
+ if (type == 1 || !record->len) /* eof */
+ return false;
+ else if (type == 0)
+ return true;
+ else {
+ record->error = true;
+ return false;
+ }
+}
+
+static int usb6fire_fw_ihex_init(const struct firmware *fw,
+ struct ihex_record *record)
+{
+ record->txt_data = fw->data;
+ record->txt_length = fw->size;
+ record->txt_offset = 0;
+ record->max_len = 0;
+ /* read all records, if loop ends, record->error indicates,
+ * whether ihex is valid. */
+ while (usb6fire_fw_ihex_next_record(record))
+ record->max_len = max(record->len, record->max_len);
+ if (record->error)
+ return -EINVAL;
+ record->txt_offset = 0;
+ return 0;
+}
+
+static int usb6fire_fw_ezusb_write(struct usb_device *device,
+ int type, int value, char *data, int len)
+{
+ int ret;
+
+ ret = usb_control_msg(device, usb_sndctrlpipe(device, 0), type,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ value, 0, data, len, HZ);
+ if (ret < 0)
+ return ret;
+ else if (ret != len)
+ return -EIO;
+ return 0;
+}
+
+static int usb6fire_fw_ezusb_read(struct usb_device *device,
+ int type, int value, char *data, int len)
+{
+ int ret = usb_control_msg(device, usb_rcvctrlpipe(device, 0), type,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, value,
+ 0, data, len, HZ);
+ if (ret < 0)
+ return ret;
+ else if (ret != len)
+ return -EIO;
+ return 0;
+}
+
+static int usb6fire_fw_fpga_write(struct usb_device *device,
+ char *data, int len)
+{
+ int actual_len;
+ int ret;
+
+ ret = usb_bulk_msg(device, usb_sndbulkpipe(device, FPGA_EP), data, len,
+ &actual_len, HZ);
+ if (ret < 0)
+ return ret;
+ else if (actual_len != len)
+ return -EIO;
+ return 0;
+}
+
+static int usb6fire_fw_ezusb_upload(
+ struct usb_interface *intf, const char *fwname,
+ unsigned int postaddr, u8 *postdata, unsigned int postlen)
+{
+ int ret;
+ u8 data;
+ struct usb_device *device = interface_to_usbdev(intf);
+ const struct firmware *fw = 0;
+ struct ihex_record *rec = kmalloc(sizeof(struct ihex_record),
+ GFP_KERNEL);
+
+ if (!rec)
+ return -ENOMEM;
+
+ ret = request_firmware(&fw, fwname, &device->dev);
+ if (ret < 0) {
+ kfree(rec);
+ snd_printk(KERN_ERR PREFIX "error requesting ezusb "
+ "firmware %s.\n", fwname);
+ return ret;
+ }
+ ret = usb6fire_fw_ihex_init(fw, rec);
+ if (ret < 0) {
+ kfree(rec);
+ snd_printk(KERN_ERR PREFIX "error validating ezusb "
+ "firmware %s.\n", fwname);
+ return ret;
+ }
+ /* upload firmware image */
+ data = 0x01; /* stop ezusb cpu */
+ ret = usb6fire_fw_ezusb_write(device, 0xa0, 0xe600, &data, 1);
+ if (ret < 0) {
+ kfree(rec);
+ release_firmware(fw);
+ snd_printk(KERN_ERR PREFIX "unable to upload ezusb "
+ "firmware %s: begin message.\n", fwname);
+ return ret;
+ }
+
+ while (usb6fire_fw_ihex_next_record(rec)) { /* write firmware */
+ ret = usb6fire_fw_ezusb_write(device, 0xa0, rec->address,
+ rec->data, rec->len);
+ if (ret < 0) {
+ kfree(rec);
+ release_firmware(fw);
+ snd_printk(KERN_ERR PREFIX "unable to upload ezusb "
+ "firmware %s: data urb.\n", fwname);
+ return ret;
+ }
+ }
+
+ release_firmware(fw);
+ kfree(rec);
+ if (postdata) { /* write data after firmware has been uploaded */
+ ret = usb6fire_fw_ezusb_write(device, 0xa0, postaddr,
+ postdata, postlen);
+ if (ret < 0) {
+ snd_printk(KERN_ERR PREFIX "unable to upload ezusb "
+ "firmware %s: post urb.\n", fwname);
+ return ret;
+ }
+ }
+
+ data = 0x00; /* resume ezusb cpu */
+ ret = usb6fire_fw_ezusb_write(device, 0xa0, 0xe600, &data, 1);
+ if (ret < 0) {
+ release_firmware(fw);
+ snd_printk(KERN_ERR PREFIX "unable to upload ezusb "
+ "firmware %s: end message.\n", fwname);
+ return ret;
+ }
+ return 0;
+}
+
+static int usb6fire_fw_fpga_upload(
+ struct usb_interface *intf, const char *fwname)
+{
+ int ret;
+ int i;
+ struct usb_device *device = interface_to_usbdev(intf);
+ u8 *buffer = kmalloc(FPGA_BUFSIZE, GFP_KERNEL);
+ const char *c;
+ const char *end;
+ const struct firmware *fw;
+
+ if (!buffer)
+ return -ENOMEM;
+
+ ret = request_firmware(&fw, fwname, &device->dev);
+ if (ret < 0) {
+ snd_printk(KERN_ERR PREFIX "unable to get fpga firmware %s.\n",
+ fwname);
+ kfree(buffer);
+ return -EIO;
+ }
+
+ c = fw->data;
+ end = fw->data + fw->size;
+
+ ret = usb6fire_fw_ezusb_write(device, 8, 0, NULL, 0);
+ if (ret < 0) {
+ kfree(buffer);
+ release_firmware(fw);
+ snd_printk(KERN_ERR PREFIX "unable to upload fpga firmware: "
+ "begin urb.\n");
+ return ret;
+ }
+
+ while (c != end) {
+ for (i = 0; c != end && i < FPGA_BUFSIZE; i++, c++)
+ buffer[i] = BIT_REVERSE_TABLE[(u8) *c];
+
+ ret = usb6fire_fw_fpga_write(device, buffer, i);
+ if (ret < 0) {
+ release_firmware(fw);
+ kfree(buffer);
+ snd_printk(KERN_ERR PREFIX "unable to upload fpga "
+ "firmware: fw urb.\n");
+ return ret;
+ }
+ }
+ release_firmware(fw);
+ kfree(buffer);
+
+ ret = usb6fire_fw_ezusb_write(device, 9, 0, NULL, 0);
+ if (ret < 0) {
+ snd_printk(KERN_ERR PREFIX "unable to upload fpga firmware: "
+ "end urb.\n");
+ return ret;
+ }
+ return 0;
+}
+
+int usb6fire_fw_init(struct usb_interface *intf)
+{
+ int i;
+ int ret;
+ struct usb_device *device = interface_to_usbdev(intf);
+ /* buffer: 8 receiving bytes from device and
+ * sizeof(EP_W_MAX_PACKET_SIZE) bytes for non-const copy */
+ u8 buffer[12];
+
+ ret = usb6fire_fw_ezusb_read(device, 1, 0, buffer, 8);
+ if (ret < 0) {
+ snd_printk(KERN_ERR PREFIX "unable to receive device "
+ "firmware state.\n");
+ return ret;
+ }
+ if (buffer[0] != 0xeb || buffer[1] != 0xaa || buffer[2] != 0x55
+ || buffer[4] != 0x03 || buffer[5] != 0x01 || buffer[7]
+ != 0x00) {
+ snd_printk(KERN_ERR PREFIX "unknown device firmware state "
+ "received from device: ");
+ for (i = 0; i < 8; i++)
+ snd_printk("%02x ", buffer[i]);
+ snd_printk("\n");
+ return -EIO;
+ }
+ /* do we need fpga loader ezusb firmware? */
+ if (buffer[3] == 0x01 && buffer[6] == 0x19) {
+ ret = usb6fire_fw_ezusb_upload(intf,
+ "6fire/dmx6firel2.ihx", 0, NULL, 0);
+ if (ret < 0)
+ return ret;
+ return FW_NOT_READY;
+ }
+ /* do we need fpga firmware and application ezusb firmware? */
+ else if (buffer[3] == 0x02 && buffer[6] == 0x0b) {
+ ret = usb6fire_fw_fpga_upload(intf, "6fire/dmx6firecf.bin");
+ if (ret < 0)
+ return ret;
+ memcpy(buffer, ep_w_max_packet_size,
+ sizeof(ep_w_max_packet_size));
+ ret = usb6fire_fw_ezusb_upload(intf, "6fire/dmx6fireap.ihx",
+ 0x0003, buffer, sizeof(ep_w_max_packet_size));
+ if (ret < 0)
+ return ret;
+ return FW_NOT_READY;
+ }
+ /* all fw loaded? */
+ else if (buffer[3] == 0x03 && buffer[6] == 0x0b)
+ return 0;
+ /* unknown data? */
+ else {
+ snd_printk(KERN_ERR PREFIX "unknown device firmware state "
+ "received from device: ");
+ for (i = 0; i < 8; i++)
+ snd_printk("%02x ", buffer[i]);
+ snd_printk("\n");
+ return -EIO;
+ }
+ return 0;
+}
+
--- /dev/null
+/*
+ * Linux driver for TerraTec DMX 6Fire USB
+ *
+ * Author: Torsten Schenk
+ * Created: Jan 01, 2011
+ * Copyright: (C) Torsten Schenk
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef USB6FIRE_FIRMWARE_H
+#define USB6FIRE_FIRMWARE_H
+
+#include "common.h"
+
+enum /* firmware state of device */
+{
+ FW_READY = 0,
+ FW_NOT_READY = 1
+};
+
+int __devinit usb6fire_fw_init(struct usb_interface *intf);
+#endif /* USB6FIRE_FIRMWARE_H */
+
--- /dev/null
+/*
+ * Linux driver for TerraTec DMX 6Fire USB
+ *
+ * Rawmidi driver
+ *
+ * Author: Torsten Schenk <torsten.schenk@zoho.com>
+ * Created: Jan 01, 2011
+ * Version: 0.3.0
+ * Copyright: (C) Torsten Schenk
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <sound/rawmidi.h>
+
+#include "midi.h"
+#include "chip.h"
+#include "comm.h"
+
+static void usb6fire_midi_out_handler(struct urb *urb)
+{
+ struct midi_runtime *rt = urb->context;
+ int ret;
+ unsigned long flags;
+
+ spin_lock_irqsave(&rt->out_lock, flags);
+
+ if (rt->out) {
+ ret = snd_rawmidi_transmit(rt->out, rt->out_buffer + 4,
+ MIDI_BUFSIZE - 4);
+ if (ret > 0) { /* more data available, send next packet */
+ rt->out_buffer[1] = ret + 2;
+ rt->out_buffer[3] = rt->out_serial++;
+ urb->transfer_buffer_length = ret + 4;
+
+ ret = usb_submit_urb(urb, GFP_ATOMIC);
+ if (ret < 0)
+ snd_printk(KERN_ERR PREFIX "midi out urb "
+ "submit failed: %d\n", ret);
+ } else /* no more data to transmit */
+ rt->out = NULL;
+ }
+ spin_unlock_irqrestore(&rt->out_lock, flags);
+}
+
+static void usb6fire_midi_in_received(
+ struct midi_runtime *rt, u8 *data, int length)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&rt->in_lock, flags);
+ if (rt->in)
+ snd_rawmidi_receive(rt->in, data, length);
+ spin_unlock_irqrestore(&rt->in_lock, flags);
+}
+
+static int usb6fire_midi_out_open(struct snd_rawmidi_substream *alsa_sub)
+{
+ return 0;
+}
+
+static int usb6fire_midi_out_close(struct snd_rawmidi_substream *alsa_sub)
+{
+ return 0;
+}
+
+static void usb6fire_midi_out_trigger(
+ struct snd_rawmidi_substream *alsa_sub, int up)
+{
+ struct midi_runtime *rt = alsa_sub->rmidi->private_data;
+ struct urb *urb = &rt->out_urb;
+ __s8 ret;
+ unsigned long flags;
+
+ spin_lock_irqsave(&rt->out_lock, flags);
+ if (up) { /* start transfer */
+ if (rt->out) { /* we are already transmitting so just return */
+ spin_unlock_irqrestore(&rt->out_lock, flags);
+ return;
+ }
+
+ ret = snd_rawmidi_transmit(alsa_sub, rt->out_buffer + 4,
+ MIDI_BUFSIZE - 4);
+ if (ret > 0) {
+ rt->out_buffer[1] = ret + 2;
+ rt->out_buffer[3] = rt->out_serial++;
+ urb->transfer_buffer_length = ret + 4;
+
+ ret = usb_submit_urb(urb, GFP_ATOMIC);
+ if (ret < 0)
+ snd_printk(KERN_ERR PREFIX "midi out urb "
+ "submit failed: %d\n", ret);
+ else
+ rt->out = alsa_sub;
+ }
+ } else if (rt->out == alsa_sub)
+ rt->out = NULL;
+ spin_unlock_irqrestore(&rt->out_lock, flags);
+}
+
+static void usb6fire_midi_out_drain(struct snd_rawmidi_substream *alsa_sub)
+{
+ struct midi_runtime *rt = alsa_sub->rmidi->private_data;
+ int retry = 0;
+
+ while (rt->out && retry++ < 100)
+ msleep(10);
+}
+
+static int usb6fire_midi_in_open(struct snd_rawmidi_substream *alsa_sub)
+{
+ return 0;
+}
+
+static int usb6fire_midi_in_close(struct snd_rawmidi_substream *alsa_sub)
+{
+ return 0;
+}
+
+static void usb6fire_midi_in_trigger(
+ struct snd_rawmidi_substream *alsa_sub, int up)
+{
+ struct midi_runtime *rt = alsa_sub->rmidi->private_data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&rt->in_lock, flags);
+ if (up)
+ rt->in = alsa_sub;
+ else
+ rt->in = NULL;
+ spin_unlock_irqrestore(&rt->in_lock, flags);
+}
+
+static struct snd_rawmidi_ops out_ops = {
+ .open = usb6fire_midi_out_open,
+ .close = usb6fire_midi_out_close,
+ .trigger = usb6fire_midi_out_trigger,
+ .drain = usb6fire_midi_out_drain
+};
+
+static struct snd_rawmidi_ops in_ops = {
+ .open = usb6fire_midi_in_open,
+ .close = usb6fire_midi_in_close,
+ .trigger = usb6fire_midi_in_trigger
+};
+
+int __devinit usb6fire_midi_init(struct sfire_chip *chip)
+{
+ int ret;
+ struct midi_runtime *rt = kzalloc(sizeof(struct midi_runtime),
+ GFP_KERNEL);
+ struct comm_runtime *comm_rt = chip->comm;
+
+ if (!rt)
+ return -ENOMEM;
+
+ rt->chip = chip;
+ rt->in_received = usb6fire_midi_in_received;
+ rt->out_buffer[0] = 0x80; /* 'send midi' command */
+ rt->out_buffer[1] = 0x00; /* size of data */
+ rt->out_buffer[2] = 0x00; /* always 0 */
+ spin_lock_init(&rt->in_lock);
+ spin_lock_init(&rt->out_lock);
+
+ comm_rt->init_urb(comm_rt, &rt->out_urb, rt->out_buffer, rt,
+ usb6fire_midi_out_handler);
+
+ ret = snd_rawmidi_new(chip->card, "6FireUSB", 0, 1, 1, &rt->instance);
+ if (ret < 0) {
+ kfree(rt);
+ snd_printk(KERN_ERR PREFIX "unable to create midi.\n");
+ return ret;
+ }
+ rt->instance->private_data = rt;
+ strcpy(rt->instance->name, "DMX6FireUSB MIDI");
+ rt->instance->info_flags = SNDRV_RAWMIDI_INFO_OUTPUT |
+ SNDRV_RAWMIDI_INFO_INPUT |
+ SNDRV_RAWMIDI_INFO_DUPLEX;
+ snd_rawmidi_set_ops(rt->instance, SNDRV_RAWMIDI_STREAM_OUTPUT,
+ &out_ops);
+ snd_rawmidi_set_ops(rt->instance, SNDRV_RAWMIDI_STREAM_INPUT,
+ &in_ops);
+
+ chip->midi = rt;
+ return 0;
+}
+
+void usb6fire_midi_abort(struct sfire_chip *chip)
+{
+ struct midi_runtime *rt = chip->midi;
+
+ if (rt)
+ usb_poison_urb(&rt->out_urb);
+}
+
+void usb6fire_midi_destroy(struct sfire_chip *chip)
+{
+ kfree(chip->midi);
+ chip->midi = NULL;
+}
--- /dev/null
+/*
+ * Linux driver for TerraTec DMX 6Fire USB
+ *
+ * Author: Torsten Schenk <torsten.schenk@zoho.com>
+ * Created: Jan 01, 2011
+ * Version: 0.3.0
+ * Copyright: (C) Torsten Schenk
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef USB6FIRE_MIDI_H
+#define USB6FIRE_MIDI_H
+
+#include "common.h"
+
+enum {
+ MIDI_BUFSIZE = 64
+};
+
+struct midi_runtime {
+ struct sfire_chip *chip;
+ struct snd_rawmidi *instance;
+
+ struct snd_rawmidi_substream *in;
+ char in_active;
+
+ spinlock_t in_lock;
+ spinlock_t out_lock;
+ struct snd_rawmidi_substream *out;
+ struct urb out_urb;
+ u8 out_serial; /* serial number of out packet */
+ u8 out_buffer[MIDI_BUFSIZE];
+ int buffer_offset;
+
+ void (*in_received)(struct midi_runtime *rt, u8 *data, int length);
+};
+
+int __devinit usb6fire_midi_init(struct sfire_chip *chip);
+void usb6fire_midi_abort(struct sfire_chip *chip);
+void usb6fire_midi_destroy(struct sfire_chip *chip);
+#endif /* USB6FIRE_MIDI_H */
+
--- /dev/null
+/*
+ * Linux driver for TerraTec DMX 6Fire USB
+ *
+ * PCM driver
+ *
+ * Author: Torsten Schenk <torsten.schenk@zoho.com>
+ * Created: Jan 01, 2011
+ * Version: 0.3.0
+ * Copyright: (C) Torsten Schenk
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include "pcm.h"
+#include "chip.h"
+#include "comm.h"
+
+enum {
+ OUT_N_CHANNELS = 6, IN_N_CHANNELS = 4
+};
+
+/* keep next two synced with
+ * FW_EP_W_MAX_PACKET_SIZE[] and RATES_MAX_PACKET_SIZE */
+static const int rates_in_packet_size[] = { 228, 228, 420, 420, 404, 404 };
+static const int rates_out_packet_size[] = { 228, 228, 420, 420, 604, 604 };
+static const int rates[] = { 44100, 48000, 88200, 96000, 176400, 192000 };
+static const int rates_altsetting[] = { 1, 1, 2, 2, 3, 3 };
+static const int rates_alsaid[] = {
+ SNDRV_PCM_RATE_44100, SNDRV_PCM_RATE_48000,
+ SNDRV_PCM_RATE_88200, SNDRV_PCM_RATE_96000,
+ SNDRV_PCM_RATE_176400, SNDRV_PCM_RATE_192000 };
+
+/* values to write to soundcard register for all samplerates */
+static const u16 rates_6fire_vl[] = {0x00, 0x01, 0x00, 0x01, 0x00, 0x01};
+static const u16 rates_6fire_vh[] = {0x11, 0x11, 0x10, 0x10, 0x00, 0x00};
+
+enum { /* settings for pcm */
+ OUT_EP = 6, IN_EP = 2, MAX_BUFSIZE = 128 * 1024
+};
+
+enum { /* pcm streaming states */
+ STREAM_DISABLED, /* no pcm streaming */
+ STREAM_STARTING, /* pcm streaming requested, waiting to become ready */
+ STREAM_RUNNING, /* pcm streaming running */
+ STREAM_STOPPING
+};
+
+enum { /* pcm sample rates (also index into RATES_XXX[]) */
+ RATE_44KHZ,
+ RATE_48KHZ,
+ RATE_88KHZ,
+ RATE_96KHZ,
+ RATE_176KHZ,
+ RATE_192KHZ
+};
+
+static const struct snd_pcm_hardware pcm_hw = {
+ .info = SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_BATCH,
+
+ .formats = SNDRV_PCM_FMTBIT_S24_LE,
+
+ .rates = SNDRV_PCM_RATE_44100 |
+ SNDRV_PCM_RATE_48000 |
+ SNDRV_PCM_RATE_88200 |
+ SNDRV_PCM_RATE_96000 |
+ SNDRV_PCM_RATE_176400 |
+ SNDRV_PCM_RATE_192000,
+
+ .rate_min = 44100,
+ .rate_max = 192000,
+ .channels_min = 1,
+ .channels_max = 0, /* set in pcm_open, depending on capture/playback */
+ .buffer_bytes_max = MAX_BUFSIZE,
+ .period_bytes_min = PCM_N_PACKETS_PER_URB * (PCM_MAX_PACKET_SIZE - 4),
+ .period_bytes_max = MAX_BUFSIZE,
+ .periods_min = 2,
+ .periods_max = 1024
+};
+
+static int usb6fire_pcm_set_rate(struct pcm_runtime *rt)
+{
+ int ret;
+ struct usb_device *device = rt->chip->dev;
+ struct comm_runtime *comm_rt = rt->chip->comm;
+
+ if (rt->rate >= ARRAY_SIZE(rates))
+ return -EINVAL;
+ /* disable streaming */
+ ret = comm_rt->write16(comm_rt, 0x02, 0x00, 0x00, 0x00);
+ if (ret < 0) {
+ snd_printk(KERN_ERR PREFIX "error stopping streaming while "
+ "setting samplerate %d.\n", rates[rt->rate]);
+ return ret;
+ }
+
+ ret = usb_set_interface(device, 1, rates_altsetting[rt->rate]);
+ if (ret < 0) {
+ snd_printk(KERN_ERR PREFIX "error setting interface "
+ "altsetting %d for samplerate %d.\n",
+ rates_altsetting[rt->rate], rates[rt->rate]);
+ return ret;
+ }
+
+ /* set soundcard clock */
+ ret = comm_rt->write16(comm_rt, 0x02, 0x01, rates_6fire_vl[rt->rate],
+ rates_6fire_vh[rt->rate]);
+ if (ret < 0) {
+ snd_printk(KERN_ERR PREFIX "error setting samplerate %d.\n",
+ rates[rt->rate]);
+ return ret;
+ }
+
+ /* enable analog inputs and outputs
+ * (one bit per stereo-channel) */
+ ret = comm_rt->write16(comm_rt, 0x02, 0x02,
+ (1 << (OUT_N_CHANNELS / 2)) - 1,
+ (1 << (IN_N_CHANNELS / 2)) - 1);
+ if (ret < 0) {
+ snd_printk(KERN_ERR PREFIX "error initializing analog channels "
+ "while setting samplerate %d.\n",
+ rates[rt->rate]);
+ return ret;
+ }
+ /* disable digital inputs and outputs */
+ ret = comm_rt->write16(comm_rt, 0x02, 0x03, 0x00, 0x00);
+ if (ret < 0) {
+ snd_printk(KERN_ERR PREFIX "error initializing digital "
+ "channels while setting samplerate %d.\n",
+ rates[rt->rate]);
+ return ret;
+ }
+
+ ret = comm_rt->write16(comm_rt, 0x02, 0x00, 0x00, 0x01);
+ if (ret < 0) {
+ snd_printk(KERN_ERR PREFIX "error starting streaming while "
+ "setting samplerate %d.\n", rates[rt->rate]);
+ return ret;
+ }
+
+ rt->in_n_analog = IN_N_CHANNELS;
+ rt->out_n_analog = OUT_N_CHANNELS;
+ rt->in_packet_size = rates_in_packet_size[rt->rate];
+ rt->out_packet_size = rates_out_packet_size[rt->rate];
+ return 0;
+}
+
+static struct pcm_substream *usb6fire_pcm_get_substream(
+ struct snd_pcm_substream *alsa_sub)
+{
+ struct pcm_runtime *rt = snd_pcm_substream_chip(alsa_sub);
+
+ if (alsa_sub->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ return &rt->playback;
+ else if (alsa_sub->stream == SNDRV_PCM_STREAM_CAPTURE)
+ return &rt->capture;
+ snd_printk(KERN_ERR PREFIX "error getting pcm substream slot.\n");
+ return NULL;
+}
+
+/* call with stream_mutex locked */
+static void usb6fire_pcm_stream_stop(struct pcm_runtime *rt)
+{
+ int i;
+
+ if (rt->stream_state != STREAM_DISABLED) {
+ for (i = 0; i < PCM_N_URBS; i++) {
+ usb_kill_urb(&rt->in_urbs[i].instance);
+ usb_kill_urb(&rt->out_urbs[i].instance);
+ }
+ rt->stream_state = STREAM_DISABLED;
+ }
+}
+
+/* call with stream_mutex locked */
+static int usb6fire_pcm_stream_start(struct pcm_runtime *rt)
+{
+ int ret;
+ int i;
+ int k;
+ struct usb_iso_packet_descriptor *packet;
+
+ if (rt->stream_state == STREAM_DISABLED) {
+ /* submit our in urbs */
+ rt->stream_wait_cond = false;
+ rt->stream_state = STREAM_STARTING;
+ for (i = 0; i < PCM_N_URBS; i++) {
+ for (k = 0; k < PCM_N_PACKETS_PER_URB; k++) {
+ packet = &rt->in_urbs[i].packets[k];
+ packet->offset = k * rt->in_packet_size;
+ packet->length = rt->in_packet_size;
+ packet->actual_length = 0;
+ packet->status = 0;
+ }
+ ret = usb_submit_urb(&rt->in_urbs[i].instance,
+ GFP_ATOMIC);
+ if (ret) {
+ usb6fire_pcm_stream_stop(rt);
+ return ret;
+ }
+ }
+
+ /* wait for first out urb to return (sent in in urb handler) */
+ wait_event_timeout(rt->stream_wait_queue, rt->stream_wait_cond,
+ HZ);
+ if (rt->stream_wait_cond)
+ rt->stream_state = STREAM_RUNNING;
+ else {
+ usb6fire_pcm_stream_stop(rt);
+ return -EIO;
+ }
+ }
+ return 0;
+}
+
+/* call with substream locked */
+static void usb6fire_pcm_capture(struct pcm_substream *sub, struct pcm_urb *urb)
+{
+ int i;
+ int frame;
+ int frame_count;
+ unsigned int total_length = 0;
+ struct pcm_runtime *rt = snd_pcm_substream_chip(sub->instance);
+ struct snd_pcm_runtime *alsa_rt = sub->instance->runtime;
+ u32 *src = (u32 *) urb->buffer;
+ u32 *dest = (u32 *) (alsa_rt->dma_area + sub->dma_off
+ * (alsa_rt->frame_bits >> 3));
+ u32 *dest_end = (u32 *) (alsa_rt->dma_area + alsa_rt->buffer_size
+ * (alsa_rt->frame_bits >> 3));
+ int bytes_per_frame = alsa_rt->channels << 2;
+
+ for (i = 0; i < PCM_N_PACKETS_PER_URB; i++) {
+ /* at least 4 header bytes for valid packet.
+ * after that: 32 bits per sample for analog channels */
+ if (urb->packets[i].actual_length > 4)
+ frame_count = (urb->packets[i].actual_length - 4)
+ / (rt->in_n_analog << 2);
+ else
+ frame_count = 0;
+
+ src = (u32 *) (urb->buffer + total_length);
+ src++; /* skip leading 4 bytes of every packet */
+ total_length += urb->packets[i].length;
+ for (frame = 0; frame < frame_count; frame++) {
+ memcpy(dest, src, bytes_per_frame);
+ dest += alsa_rt->channels;
+ src += rt->in_n_analog;
+ sub->dma_off++;
+ sub->period_off++;
+ if (dest == dest_end) {
+ sub->dma_off = 0;
+ dest = (u32 *) alsa_rt->dma_area;
+ }
+ }
+ }
+}
+
+/* call with substream locked */
+static void usb6fire_pcm_playback(struct pcm_substream *sub,
+ struct pcm_urb *urb)
+{
+ int i;
+ int frame;
+ int frame_count;
+ struct pcm_runtime *rt = snd_pcm_substream_chip(sub->instance);
+ struct snd_pcm_runtime *alsa_rt = sub->instance->runtime;
+ u32 *src = (u32 *) (alsa_rt->dma_area + sub->dma_off
+ * (alsa_rt->frame_bits >> 3));
+ u32 *src_end = (u32 *) (alsa_rt->dma_area + alsa_rt->buffer_size
+ * (alsa_rt->frame_bits >> 3));
+ u32 *dest = (u32 *) urb->buffer;
+ int bytes_per_frame = alsa_rt->channels << 2;
+
+ for (i = 0; i < PCM_N_PACKETS_PER_URB; i++) {
+ /* at least 4 header bytes for valid packet.
+ * after that: 32 bits per sample for analog channels */
+ if (urb->packets[i].length > 4)
+ frame_count = (urb->packets[i].length - 4)
+ / (rt->out_n_analog << 2);
+ else
+ frame_count = 0;
+ dest++; /* skip leading 4 bytes of every frame */
+ for (frame = 0; frame < frame_count; frame++) {
+ memcpy(dest, src, bytes_per_frame);
+ src += alsa_rt->channels;
+ dest += rt->out_n_analog;
+ sub->dma_off++;
+ sub->period_off++;
+ if (src == src_end) {
+ src = (u32 *) alsa_rt->dma_area;
+ sub->dma_off = 0;
+ }
+ }
+ }
+}
+
+static void usb6fire_pcm_in_urb_handler(struct urb *usb_urb)
+{
+ struct pcm_urb *in_urb = usb_urb->context;
+ struct pcm_urb *out_urb = in_urb->peer;
+ struct pcm_runtime *rt = in_urb->chip->pcm;
+ struct pcm_substream *sub;
+ unsigned long flags;
+ int total_length = 0;
+ int frame_count;
+ int frame;
+ int channel;
+ int i;
+ u8 *dest;
+
+ if (usb_urb->status || rt->panic || rt->stream_state == STREAM_STOPPING)
+ return;
+ for (i = 0; i < PCM_N_PACKETS_PER_URB; i++)
+ if (in_urb->packets[i].status) {
+ rt->panic = true;
+ return;
+ }
+
+ if (rt->stream_state == STREAM_DISABLED) {
+ snd_printk(KERN_ERR PREFIX "internal error: "
+ "stream disabled in in-urb handler.\n");
+ return;
+ }
+
+ /* receive our capture data */
+ sub = &rt->capture;
+ spin_lock_irqsave(&sub->lock, flags);
+ if (sub->active) {
+ usb6fire_pcm_capture(sub, in_urb);
+ if (sub->period_off >= sub->instance->runtime->period_size) {
+ sub->period_off %= sub->instance->runtime->period_size;
+ spin_unlock_irqrestore(&sub->lock, flags);
+ snd_pcm_period_elapsed(sub->instance);
+ } else
+ spin_unlock_irqrestore(&sub->lock, flags);
+ } else
+ spin_unlock_irqrestore(&sub->lock, flags);
+
+ /* setup out urb structure */
+ for (i = 0; i < PCM_N_PACKETS_PER_URB; i++) {
+ out_urb->packets[i].offset = total_length;
+ out_urb->packets[i].length = (in_urb->packets[i].actual_length
+ - 4) / (rt->in_n_analog << 2)
+ * (rt->out_n_analog << 2) + 4;
+ out_urb->packets[i].status = 0;
+ total_length += out_urb->packets[i].length;
+ }
+ memset(out_urb->buffer, 0, total_length);
+
+ /* now send our playback data (if a free out urb was found) */
+ sub = &rt->playback;
+ spin_lock_irqsave(&sub->lock, flags);
+ if (sub->active) {
+ usb6fire_pcm_playback(sub, out_urb);
+ if (sub->period_off >= sub->instance->runtime->period_size) {
+ sub->period_off %= sub->instance->runtime->period_size;
+ spin_unlock_irqrestore(&sub->lock, flags);
+ snd_pcm_period_elapsed(sub->instance);
+ } else
+ spin_unlock_irqrestore(&sub->lock, flags);
+ } else
+ spin_unlock_irqrestore(&sub->lock, flags);
+
+ /* setup the 4th byte of each sample (0x40 for analog channels) */
+ dest = out_urb->buffer;
+ for (i = 0; i < PCM_N_PACKETS_PER_URB; i++)
+ if (out_urb->packets[i].length >= 4) {
+ frame_count = (out_urb->packets[i].length - 4)
+ / (rt->out_n_analog << 2);
+ *(dest++) = 0xaa;
+ *(dest++) = 0xaa;
+ *(dest++) = frame_count;
+ *(dest++) = 0x00;
+ for (frame = 0; frame < frame_count; frame++)
+ for (channel = 0;
+ channel < rt->out_n_analog;
+ channel++) {
+ dest += 3; /* skip sample data */
+ *(dest++) = 0x40;
+ }
+ }
+ usb_submit_urb(&out_urb->instance, GFP_ATOMIC);
+ usb_submit_urb(&in_urb->instance, GFP_ATOMIC);
+}
+
+static void usb6fire_pcm_out_urb_handler(struct urb *usb_urb)
+{
+ struct pcm_urb *urb = usb_urb->context;
+ struct pcm_runtime *rt = urb->chip->pcm;
+
+ if (rt->stream_state == STREAM_STARTING) {
+ rt->stream_wait_cond = true;
+ wake_up(&rt->stream_wait_queue);
+ }
+}
+
+static int usb6fire_pcm_open(struct snd_pcm_substream *alsa_sub)
+{
+ struct pcm_runtime *rt = snd_pcm_substream_chip(alsa_sub);
+ struct pcm_substream *sub = NULL;
+ struct snd_pcm_runtime *alsa_rt = alsa_sub->runtime;
+
+ if (rt->panic)
+ return -EPIPE;
+
+ mutex_lock(&rt->stream_mutex);
+ alsa_rt->hw = pcm_hw;
+
+ if (alsa_sub->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ if (rt->rate >= 0)
+ alsa_rt->hw.rates = rates_alsaid[rt->rate];
+ alsa_rt->hw.channels_max = OUT_N_CHANNELS;
+ sub = &rt->playback;
+ } else if (alsa_sub->stream == SNDRV_PCM_STREAM_CAPTURE) {
+ if (rt->rate >= 0)
+ alsa_rt->hw.rates = rates_alsaid[rt->rate];
+ alsa_rt->hw.channels_max = IN_N_CHANNELS;
+ sub = &rt->capture;
+ }
+
+ if (!sub) {
+ mutex_unlock(&rt->stream_mutex);
+ snd_printk(KERN_ERR PREFIX "invalid stream type.\n");
+ return -EINVAL;
+ }
+
+ sub->instance = alsa_sub;
+ sub->active = false;
+ mutex_unlock(&rt->stream_mutex);
+ return 0;
+}
+
+static int usb6fire_pcm_close(struct snd_pcm_substream *alsa_sub)
+{
+ struct pcm_runtime *rt = snd_pcm_substream_chip(alsa_sub);
+ struct pcm_substream *sub = usb6fire_pcm_get_substream(alsa_sub);
+ unsigned long flags;
+
+ if (rt->panic)
+ return 0;
+
+ mutex_lock(&rt->stream_mutex);
+ if (sub) {
+ /* deactivate substream */
+ spin_lock_irqsave(&sub->lock, flags);
+ sub->instance = NULL;
+ sub->active = false;
+ spin_unlock_irqrestore(&sub->lock, flags);
+
+ /* all substreams closed? if so, stop streaming */
+ if (!rt->playback.instance && !rt->capture.instance) {
+ usb6fire_pcm_stream_stop(rt);
+ rt->rate = -1;
+ }
+ }
+ mutex_unlock(&rt->stream_mutex);
+ return 0;
+}
+
+static int usb6fire_pcm_hw_params(struct snd_pcm_substream *alsa_sub,
+ struct snd_pcm_hw_params *hw_params)
+{
+ return snd_pcm_lib_malloc_pages(alsa_sub,
+ params_buffer_bytes(hw_params));
+}
+
+static int usb6fire_pcm_hw_free(struct snd_pcm_substream *alsa_sub)
+{
+ return snd_pcm_lib_free_pages(alsa_sub);
+}
+
+static int usb6fire_pcm_prepare(struct snd_pcm_substream *alsa_sub)
+{
+ struct pcm_runtime *rt = snd_pcm_substream_chip(alsa_sub);
+ struct pcm_substream *sub = usb6fire_pcm_get_substream(alsa_sub);
+ struct snd_pcm_runtime *alsa_rt = alsa_sub->runtime;
+ int i;
+ int ret;
+
+ if (rt->panic)
+ return -EPIPE;
+ if (!sub)
+ return -ENODEV;
+
+ mutex_lock(&rt->stream_mutex);
+ sub->dma_off = 0;
+ sub->period_off = 0;
+
+ if (rt->stream_state == STREAM_DISABLED) {
+ rt->rate = -1;
+ for (i = 0; i < ARRAY_SIZE(rates); i++)
+ if (alsa_rt->rate == rates[i]) {
+ rt->rate = i;
+ break;
+ }
+ if (rt->rate == -1) {
+ mutex_unlock(&rt->stream_mutex);
+ snd_printk("invalid rate %d in prepare.\n",
+ alsa_rt->rate);
+ return -EINVAL;
+ }
+
+ ret = usb6fire_pcm_set_rate(rt);
+ if (ret) {
+ mutex_unlock(&rt->stream_mutex);
+ return ret;
+ }
+ ret = usb6fire_pcm_stream_start(rt);
+ if (ret) {
+ mutex_unlock(&rt->stream_mutex);
+ snd_printk(KERN_ERR PREFIX
+ "could not start pcm stream.\n");
+ return ret;
+ }
+ }
+ mutex_unlock(&rt->stream_mutex);
+ return 0;
+}
+
+static int usb6fire_pcm_trigger(struct snd_pcm_substream *alsa_sub, int cmd)
+{
+ struct pcm_substream *sub = usb6fire_pcm_get_substream(alsa_sub);
+ struct pcm_runtime *rt = snd_pcm_substream_chip(alsa_sub);
+ unsigned long flags;
+
+ if (rt->panic)
+ return -EPIPE;
+ if (!sub)
+ return -ENODEV;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ spin_lock_irqsave(&sub->lock, flags);
+ sub->active = true;
+ spin_unlock_irqrestore(&sub->lock, flags);
+ return 0;
+
+ case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ spin_lock_irqsave(&sub->lock, flags);
+ sub->active = false;
+ spin_unlock_irqrestore(&sub->lock, flags);
+ return 0;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static snd_pcm_uframes_t usb6fire_pcm_pointer(
+ struct snd_pcm_substream *alsa_sub)
+{
+ struct pcm_substream *sub = usb6fire_pcm_get_substream(alsa_sub);
+ struct pcm_runtime *rt = snd_pcm_substream_chip(alsa_sub);
+ unsigned long flags;
+ snd_pcm_uframes_t ret;
+
+ if (rt->panic || !sub)
+ return SNDRV_PCM_STATE_XRUN;
+
+ spin_lock_irqsave(&sub->lock, flags);
+ ret = sub->dma_off;
+ spin_unlock_irqrestore(&sub->lock, flags);
+ return ret;
+}
+
+static struct snd_pcm_ops pcm_ops = {
+ .open = usb6fire_pcm_open,
+ .close = usb6fire_pcm_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = usb6fire_pcm_hw_params,
+ .hw_free = usb6fire_pcm_hw_free,
+ .prepare = usb6fire_pcm_prepare,
+ .trigger = usb6fire_pcm_trigger,
+ .pointer = usb6fire_pcm_pointer,
+};
+
+static void __devinit usb6fire_pcm_init_urb(struct pcm_urb *urb,
+ struct sfire_chip *chip, bool in, int ep,
+ void (*handler)(struct urb *))
+{
+ urb->chip = chip;
+ usb_init_urb(&urb->instance);
+ urb->instance.transfer_buffer = urb->buffer;
+ urb->instance.transfer_buffer_length =
+ PCM_N_PACKETS_PER_URB * PCM_MAX_PACKET_SIZE;
+ urb->instance.dev = chip->dev;
+ urb->instance.pipe = in ? usb_rcvisocpipe(chip->dev, ep)
+ : usb_sndisocpipe(chip->dev, ep);
+ urb->instance.interval = 1;
+ urb->instance.transfer_flags = URB_ISO_ASAP;
+ urb->instance.complete = handler;
+ urb->instance.context = urb;
+ urb->instance.number_of_packets = PCM_N_PACKETS_PER_URB;
+}
+
+int __devinit usb6fire_pcm_init(struct sfire_chip *chip)
+{
+ int i;
+ int ret;
+ struct snd_pcm *pcm;
+ struct pcm_runtime *rt =
+ kzalloc(sizeof(struct pcm_runtime), GFP_KERNEL);
+
+ if (!rt)
+ return -ENOMEM;
+
+ rt->chip = chip;
+ rt->stream_state = STREAM_DISABLED;
+ rt->rate = -1;
+ init_waitqueue_head(&rt->stream_wait_queue);
+ mutex_init(&rt->stream_mutex);
+
+ spin_lock_init(&rt->playback.lock);
+ spin_lock_init(&rt->capture.lock);
+
+ for (i = 0; i < PCM_N_URBS; i++) {
+ usb6fire_pcm_init_urb(&rt->in_urbs[i], chip, true, IN_EP,
+ usb6fire_pcm_in_urb_handler);
+ usb6fire_pcm_init_urb(&rt->out_urbs[i], chip, false, OUT_EP,
+ usb6fire_pcm_out_urb_handler);
+
+ rt->in_urbs[i].peer = &rt->out_urbs[i];
+ rt->out_urbs[i].peer = &rt->in_urbs[i];
+ }
+
+ ret = snd_pcm_new(chip->card, "DMX6FireUSB", 0, 1, 1, &pcm);
+ if (ret < 0) {
+ kfree(rt);
+ snd_printk(KERN_ERR PREFIX "cannot create pcm instance.\n");
+ return ret;
+ }
+
+ pcm->private_data = rt;
+ strcpy(pcm->name, "DMX 6Fire USB");
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &pcm_ops);
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &pcm_ops);
+
+ ret = snd_pcm_lib_preallocate_pages_for_all(pcm,
+ SNDRV_DMA_TYPE_CONTINUOUS,
+ snd_dma_continuous_data(GFP_KERNEL),
+ MAX_BUFSIZE, MAX_BUFSIZE);
+ if (ret) {
+ kfree(rt);
+ snd_printk(KERN_ERR PREFIX
+ "error preallocating pcm buffers.\n");
+ return ret;
+ }
+ rt->instance = pcm;
+
+ chip->pcm = rt;
+ return 0;
+}
+
+void usb6fire_pcm_abort(struct sfire_chip *chip)
+{
+ struct pcm_runtime *rt = chip->pcm;
+ int i;
+
+ if (rt) {
+ rt->panic = true;
+
+ if (rt->playback.instance)
+ snd_pcm_stop(rt->playback.instance,
+ SNDRV_PCM_STATE_XRUN);
+ if (rt->capture.instance)
+ snd_pcm_stop(rt->capture.instance,
+ SNDRV_PCM_STATE_XRUN);
+
+ for (i = 0; i < PCM_N_URBS; i++) {
+ usb_poison_urb(&rt->in_urbs[i].instance);
+ usb_poison_urb(&rt->out_urbs[i].instance);
+ }
+
+ }
+}
+
+void usb6fire_pcm_destroy(struct sfire_chip *chip)
+{
+ kfree(chip->pcm);
+ chip->pcm = NULL;
+}
--- /dev/null
+/*
+ * Linux driver for TerraTec DMX 6Fire USB
+ *
+ * Author: Torsten Schenk <torsten.schenk@zoho.com>
+ * Created: Jan 01, 2011
+ * Version: 0.3.0
+ * Copyright: (C) Torsten Schenk
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef USB6FIRE_PCM_H
+#define USB6FIRE_PCM_H
+
+#include <sound/pcm.h>
+#include <linux/mutex.h>
+
+#include "common.h"
+
+enum /* settings for pcm */
+{
+ /* maximum of EP_W_MAX_PACKET_SIZE[] (see firmware.c) */
+ PCM_N_URBS = 16, PCM_N_PACKETS_PER_URB = 8, PCM_MAX_PACKET_SIZE = 604
+};
+
+struct pcm_urb {
+ struct sfire_chip *chip;
+
+ /* BEGIN DO NOT SEPARATE */
+ struct urb instance;
+ struct usb_iso_packet_descriptor packets[PCM_N_PACKETS_PER_URB];
+ /* END DO NOT SEPARATE */
+ u8 buffer[PCM_N_PACKETS_PER_URB * PCM_MAX_PACKET_SIZE];
+
+ struct pcm_urb *peer;
+};
+
+struct pcm_substream {
+ spinlock_t lock;
+ struct snd_pcm_substream *instance;
+
+ bool active;
+
+ snd_pcm_uframes_t dma_off; /* current position in alsa dma_area */
+ snd_pcm_uframes_t period_off; /* current position in current period */
+};
+
+struct pcm_runtime {
+ struct sfire_chip *chip;
+ struct snd_pcm *instance;
+
+ struct pcm_substream playback;
+ struct pcm_substream capture;
+ bool panic; /* if set driver won't do anymore pcm on device */
+
+ struct pcm_urb in_urbs[PCM_N_URBS];
+ struct pcm_urb out_urbs[PCM_N_URBS];
+ int in_packet_size;
+ int out_packet_size;
+ int in_n_analog; /* number of analog channels soundcard sends */
+ int out_n_analog; /* number of analog channels soundcard receives */
+
+ struct mutex stream_mutex;
+ u8 stream_state; /* one of STREAM_XXX (pcm.c) */
+ u8 rate; /* one of PCM_RATE_XXX */
+ wait_queue_head_t stream_wait_queue;
+ bool stream_wait_cond;
+};
+
+int __devinit usb6fire_pcm_init(struct sfire_chip *chip);
+void usb6fire_pcm_abort(struct sfire_chip *chip);
+void usb6fire_pcm_destroy(struct sfire_chip *chip);
+#endif /* USB6FIRE_PCM_H */
To compile this driver as a module, choose M here: the module
will be called snd-usb-us122l.
+config SND_USB_6FIRE
+ tristate "TerraTec DMX 6Fire USB"
+ depends on EXPERIMENTAL
+ select FW_LOADER
+ select SND_RAWMIDI
+ select SND_PCM
+ help
+ Say Y here to include support for TerraTec 6fire DMX USB interface.
+
+ You will need firmware files in order to be able to use the device
+ after it has been coldstarted. This driver currently does not support
+ firmware loading for all devices. If you own such a device,
+ you could start windows and let the windows driver upload
+ the firmware. As long as you do not unplug your device from power,
+ it should be usable.
+
endif # SND_USB
obj-$(CONFIG_SND_USB_USX2Y) += snd-usbmidi-lib.o
obj-$(CONFIG_SND_USB_US122L) += snd-usbmidi-lib.o
-obj-$(CONFIG_SND) += misc/ usx2y/ caiaq/
+obj-$(CONFIG_SND) += misc/ usx2y/ caiaq/ 6fire/
projects / linux-beck.git / commitdiff