Adds GPIO device nodes to BCM7xxx MIPS based SoCs.
Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jonas Gorski <jonas.gorski@gmail.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: MIPS Mailing List <linux-mips@linux-mips.org>
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14001/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
status = "disabled";
};
+ upg_gio: gpio@406700 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x406700 0x80>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_irq0_intc>;
+ interrupts = <6>;
+ brcm,gpio-bank-widths = <32 32 32 18>;
+ };
+
ehci0: usb@488300 {
compatible = "brcm,bcm7125-ehci", "generic-ehci";
reg = <0x488300 0x100>;
status = "disabled";
};
+ aon_pm_l2_intc: interrupt-controller@408440 {
+ compatible = "brcm,l2-intc";
+ reg = <0x408440 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <53>;
+ brcm,irq-can-wake;
+ };
+
+ upg_gio: gpio@406700 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x406700 0x60>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_irq0_intc>;
+ interrupts = <6>;
+ brcm,gpio-bank-widths = <32 32 16>;
+ };
+
+ upg_gio_aon: gpio@408c00 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x408c00 0x60>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ interrupts = <6>;
+ interrupts-extended = <&upg_aon_irq0_intc 6>,
+ <&aon_pm_l2_intc 5>;
+ wakeup-source;
+ brcm,gpio-bank-widths = <27 32 2>;
+ };
+
enet0: ethernet@430000 {
phy-mode = "internal";
phy-handle = <&phy1>;
status = "disabled";
};
+ aon_pm_l2_intc: interrupt-controller@408240 {
+ compatible = "brcm,l2-intc";
+ reg = <0x408240 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <50>;
+ brcm,irq-can-wake;
+ };
+
+ upg_gio: gpio@406500 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x406500 0xa0>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_irq0_intc>;
+ interrupts = <6>;
+ brcm,gpio-bank-widths = <32 32 32 29 4>;
+ };
+
+ upg_gio_aon: gpio@408c00 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x408c00 0x60>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ interrupts = <6>;
+ interrupts-extended = <&upg_aon_irq0_intc 6>,
+ <&aon_pm_l2_intc 5>;
+ wakeup-source;
+ brcm,gpio-bank-widths = <21 32 2>;
+ };
+
enet0: ethernet@430000 {
phy-mode = "internal";
phy-handle = <&phy1>;
status = "disabled";
};
+ aon_pm_l2_intc: interrupt-controller@408440 {
+ compatible = "brcm,l2-intc";
+ reg = <0x408440 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <50>;
+ brcm,irq-can-wake;
+ };
+
+ upg_gio: gpio@406500 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x406500 0xa0>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_irq0_intc>;
+ interrupts = <6>;
+ brcm,gpio-bank-widths = <32 32 32 29 4>;
+ };
+
+ upg_gio_aon: gpio@408c00 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x408c00 0x60>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ interrupts = <6>;
+ interrupts-extended = <&upg_aon_irq0_intc 6>,
+ <&aon_pm_l2_intc 5>;
+ wakeup-source;
+ brcm,gpio-bank-widths = <21 32 2>;
+ };
+
enet0: ethernet@430000 {
phy-mode = "internal";
phy-handle = <&phy1>;
status = "disabled";
};
+ aon_pm_l2_intc: interrupt-controller@408440 {
+ compatible = "brcm,l2-intc";
+ reg = <0x408440 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <50>;
+ brcm,irq-can-wake;
+ };
+
+ upg_gio: gpio@406500 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x406500 0xa0>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_irq0_intc>;
+ interrupts = <6>;
+ brcm,gpio-bank-widths = <32 32 32 29 4>;
+ };
+
+ upg_gio_aon: gpio@408c00 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x408c00 0x60>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ interrupts = <6>;
+ interrupts-extended = <&upg_aon_irq0_intc 6>,
+ <&aon_pm_l2_intc 5>;
+ wakeup-source;
+ brcm,gpio-bank-widths = <21 32 2>;
+ };
+
enet0: ethernet@430000 {
phy-mode = "internal";
phy-handle = <&phy1>;
status = "disabled";
};
+ upg_gio: gpio@406700 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x406700 0x80>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_irq0_intc>;
+ interrupts = <6>;
+ brcm,gpio-bank-widths = <32 32 32 27>;
+ };
+
enet0: ethernet@468000 {
phy-mode = "internal";
phy-handle = <&phy1>;
status = "disabled";
};
+ aon_pm_l2_intc: interrupt-controller@408440 {
+ compatible = "brcm,l2-intc";
+ reg = <0x408440 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <49>;
+ brcm,irq-can-wake;
+ };
+
+ upg_gio: gpio@406700 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x406700 0x80>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_irq0_intc>;
+ interrupts = <6>;
+ brcm,gpio-bank-widths = <32 32 32 21>;
+ };
+
+ upg_gio_aon: gpio@4094c0 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x4094c0 0x40>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ interrupts = <6>;
+ interrupts-extended = <&upg_aon_irq0_intc 6>,
+ <&aon_pm_l2_intc 5>;
+ wakeup-source;
+ brcm,gpio-bank-widths = <18 4>;
+ };
+
enet0: ethernet@b80000 {
phy-mode = "internal";
phy-handle = <&phy1>;
status = "disabled";
};
+ aon_pm_l2_intc: interrupt-controller@408440 {
+ compatible = "brcm,l2-intc";
+ reg = <0x408440 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <54>;
+ brcm,irq-can-wake;
+ };
+
+ upg_gio: gpio@406700 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x406700 0x80>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_irq0_intc>;
+ interrupts = <6>;
+ brcm,gpio-bank-widths = <32 32 32 21>;
+ };
+
+ upg_gio_aon: gpio@4094c0 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x4094c0 0x40>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ interrupts = <6>;
+ interrupts-extended = <&upg_aon_irq0_intc 6>,
+ <&aon_pm_l2_intc 5>;
+ wakeup-source;
+ brcm,gpio-bank-widths = <18 4>;
+ };
+
enet0: ethernet@b80000 {
phy-mode = "internal";
phy-handle = <&phy1>;