return ar->hif_ops->suspend(ar, wow);
}
+/*
+ * Read from the ATH6KL through its diagnostic window. No cooperation from
+ * the Target is required for this.
+ */
+static inline int ath6kl_hif_diag_read32(struct ath6kl *ar, u32 address,
+ u32 *value)
+{
+ return ar->hif_ops->diag_read32(ar, address, value);
+}
+
+/*
+ * Write to the ATH6KL through its diagnostic window. No cooperation from
+ * the Target is required for this.
+ */
+static inline int ath6kl_hif_diag_write32(struct ath6kl *ar, u32 address,
+ __le32 value)
+{
+ return ar->hif_ops->diag_write32(ar, address, value);
+}
+
static inline int ath6kl_hif_bmi_read(struct ath6kl *ar, u8 *buf, u32 len)
{
return ar->hif_ops->bmi_read(ar, buf, len);
void (*cleanup_scatter)(struct ath6kl *ar);
int (*suspend)(struct ath6kl *ar, struct cfg80211_wowlan *wow);
int (*resume)(struct ath6kl *ar);
+ int (*diag_read32)(struct ath6kl *ar, u32 address, u32 *value);
+ int (*diag_write32)(struct ath6kl *ar, u32 address, __le32 value);
int (*bmi_read)(struct ath6kl *ar, u8 *buf, u32 len);
int (*bmi_write)(struct ath6kl *ar, u8 *buf, u32 len);
int (*power_on)(struct ath6kl *ar);
ar->cookie_count++;
}
-/* set the window address register (using 4-byte register access ). */
-static int ath6kl_set_addrwin_reg(struct ath6kl *ar, u32 reg_addr, u32 addr)
-{
- int status;
- s32 i;
- __le32 addr_val;
-
- /*
- * Write bytes 1,2,3 of the register to set the upper address bytes,
- * the LSB is written last to initiate the access cycle
- */
-
- for (i = 1; i <= 3; i++) {
- /*
- * Fill the buffer with the address byte value we want to
- * hit 4 times. No need to worry about endianness as the
- * same byte is copied to all four bytes of addr_val at
- * any time.
- */
- memset((u8 *)&addr_val, ((u8 *)&addr)[i], 4);
-
- /*
- * Hit each byte of the register address with a 4-byte
- * write operation to the same address, this is a harmless
- * operation.
- */
- status = hif_read_write_sync(ar, reg_addr + i, (u8 *)&addr_val,
- 4, HIF_WR_SYNC_BYTE_FIX);
- if (status)
- break;
- }
-
- if (status) {
- ath6kl_err("failed to write initial bytes of 0x%x to window reg: 0x%X\n",
- addr, reg_addr);
- return status;
- }
-
- /*
- * Write the address register again, this time write the whole
- * 4-byte value. The effect here is that the LSB write causes the
- * cycle to start, the extra 3 byte write to bytes 1,2,3 has no
- * effect since we are writing the same values again
- */
- addr_val = cpu_to_le32(addr);
- status = hif_read_write_sync(ar, reg_addr,
- (u8 *)&(addr_val),
- 4, HIF_WR_SYNC_BYTE_INC);
-
- if (status) {
- ath6kl_err("failed to write 0x%x to window reg: 0x%X\n",
- addr, reg_addr);
- return status;
- }
-
- return 0;
-}
-
/*
* Read from the hardware through its diagnostic window. No cooperation
* from the firmware is required for this.
{
int ret;
- /* set window register to start read cycle */
- ret = ath6kl_set_addrwin_reg(ar, WINDOW_READ_ADDR_ADDRESS, address);
- if (ret)
- return ret;
-
- /* read the data */
- ret = hif_read_write_sync(ar, WINDOW_DATA_ADDRESS, (u8 *) value,
- sizeof(*value), HIF_RD_SYNC_BYTE_INC);
+ ret = ath6kl_hif_diag_read32(ar, address, value);
if (ret) {
ath6kl_warn("failed to read32 through diagnose window: %d\n",
ret);
{
int ret;
- /* set write data */
- ret = hif_read_write_sync(ar, WINDOW_DATA_ADDRESS, (u8 *) &value,
- sizeof(value), HIF_WR_SYNC_BYTE_INC);
+ ret = ath6kl_hif_diag_write32(ar, address, value);
+
if (ret) {
ath6kl_err("failed to write 0x%x during diagnose window to 0x%d\n",
address, value);
return ret;
}
- /* set window register, which starts the write cycle */
- return ath6kl_set_addrwin_reg(ar, WINDOW_WRITE_ADDR_ADDRESS,
- address);
+ return 0;
}
int ath6kl_diag_read(struct ath6kl *ar, u32 address, void *data, u32 length)
return 0;
}
+/* set the window address register (using 4-byte register access ). */
+static int ath6kl_set_addrwin_reg(struct ath6kl *ar, u32 reg_addr, u32 addr)
+{
+ int status;
+ u8 addr_val[4];
+ s32 i;
+
+ /*
+ * Write bytes 1,2,3 of the register to set the upper address bytes,
+ * the LSB is written last to initiate the access cycle
+ */
+
+ for (i = 1; i <= 3; i++) {
+ /*
+ * Fill the buffer with the address byte value we want to
+ * hit 4 times.
+ */
+ memset(addr_val, ((u8 *)&addr)[i], 4);
+
+ /*
+ * Hit each byte of the register address with a 4-byte
+ * write operation to the same address, this is a harmless
+ * operation.
+ */
+ status = ath6kl_sdio_read_write_sync(ar, reg_addr + i, addr_val,
+ 4, HIF_WR_SYNC_BYTE_FIX);
+ if (status)
+ break;
+ }
+
+ if (status) {
+ ath6kl_err("%s: failed to write initial bytes of 0x%x "
+ "to window reg: 0x%X\n", __func__,
+ addr, reg_addr);
+ return status;
+ }
+
+ /*
+ * Write the address register again, this time write the whole
+ * 4-byte value. The effect here is that the LSB write causes the
+ * cycle to start, the extra 3 byte write to bytes 1,2,3 has no
+ * effect since we are writing the same values again
+ */
+ status = ath6kl_sdio_read_write_sync(ar, reg_addr, (u8 *)(&addr),
+ 4, HIF_WR_SYNC_BYTE_INC);
+
+ if (status) {
+ ath6kl_err("%s: failed to write 0x%x to window reg: 0x%X\n",
+ __func__, addr, reg_addr);
+ return status;
+ }
+
+ return 0;
+}
+
+static int ath6kl_sdio_diag_read32(struct ath6kl *ar, u32 address, u32 *data)
+{
+ int status;
+
+ /* set window register to start read cycle */
+ status = ath6kl_set_addrwin_reg(ar, WINDOW_READ_ADDR_ADDRESS,
+ address);
+
+ if (status)
+ return status;
+
+ /* read the data */
+ status = ath6kl_sdio_read_write_sync(ar, WINDOW_DATA_ADDRESS,
+ (u8 *)data, sizeof(u32), HIF_RD_SYNC_BYTE_INC);
+ if (status) {
+ ath6kl_err("%s: failed to read from window data addr\n",
+ __func__);
+ return status;
+ }
+
+ return status;
+}
+
+static int ath6kl_sdio_diag_write32(struct ath6kl *ar, u32 address,
+ __le32 data)
+{
+ int status;
+ u32 val = (__force u32) data;
+
+ /* set write data */
+ status = ath6kl_sdio_read_write_sync(ar, WINDOW_DATA_ADDRESS,
+ (u8 *) &val, sizeof(u32), HIF_WR_SYNC_BYTE_INC);
+ if (status) {
+ ath6kl_err("%s: failed to write 0x%x to window data addr\n",
+ __func__, data);
+ return status;
+ }
+
+ /* set window register, which starts the write cycle */
+ return ath6kl_set_addrwin_reg(ar, WINDOW_WRITE_ADDR_ADDRESS,
+ address);
+}
+
static int ath6kl_sdio_bmi_credits(struct ath6kl *ar)
{
u32 addr;
.cleanup_scatter = ath6kl_sdio_cleanup_scatter,
.suspend = ath6kl_sdio_suspend,
.resume = ath6kl_sdio_resume,
+ .diag_read32 = ath6kl_sdio_diag_read32,
+ .diag_write32 = ath6kl_sdio_diag_write32,
.bmi_read = ath6kl_sdio_bmi_read,
.bmi_write = ath6kl_sdio_bmi_write,
.power_on = ath6kl_sdio_power_on,
projects / mv-sheeva.git / commitdiff