switch (state) {
case EP0_UNCONNECTED:
return "Unconnected";
- case EP0_IDLE:
- return "Idle";
- case EP0_IN_DATA_PHASE:
- return "IN Data Phase";
- case EP0_OUT_DATA_PHASE:
- return "OUT Data Phase";
- case EP0_IN_WAIT_GADGET:
- return "IN Wait Gadget";
- case EP0_OUT_WAIT_GADGET:
- return "OUT Wait Gadget";
- case EP0_IN_WAIT_NRDY:
- return "IN Wait NRDY";
- case EP0_OUT_WAIT_NRDY:
- return "OUT Wait NRDY";
- case EP0_IN_STATUS_PHASE:
- return "IN Status Phase";
- case EP0_OUT_STATUS_PHASE:
- return "OUT Status Phase";
+ case EP0_SETUP_PHASE:
+ return "Setup Phase";
+ case EP0_DATA_PHASE:
+ return "Data Phase";
+ case EP0_STATUS_PHASE:
+ return "Status Phase";
case EP0_STALL:
return "Stall";
default:
}
static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma,
- u32 len)
+ u32 len, u32 type)
{
struct dwc3_gadget_ep_cmd_params params;
struct dwc3_trb_hw *trb_hw;
int ret;
dep = dwc->eps[epnum];
+ if (dep->flags & DWC3_EP_BUSY) {
+ dev_vdbg(dwc->dev, "%s: still busy\n", dep->name);
+ return 0;
+ }
trb_hw = dwc->ep0_trb;
memset(&trb, 0, sizeof(trb));
- switch (dwc->ep0state) {
- case EP0_IDLE:
- trb.trbctl = DWC3_TRBCTL_CONTROL_SETUP;
- break;
-
- case EP0_IN_WAIT_NRDY:
- case EP0_OUT_WAIT_NRDY:
- case EP0_IN_STATUS_PHASE:
- case EP0_OUT_STATUS_PHASE:
- if (dwc->three_stage_setup)
- trb.trbctl = DWC3_TRBCTL_CONTROL_STATUS3;
- else
- trb.trbctl = DWC3_TRBCTL_CONTROL_STATUS2;
-
- if (dwc->ep0state == EP0_IN_WAIT_NRDY)
- dwc->ep0state = EP0_IN_STATUS_PHASE;
- else if (dwc->ep0state == EP0_OUT_WAIT_NRDY)
- dwc->ep0state = EP0_OUT_STATUS_PHASE;
- break;
-
- case EP0_IN_WAIT_GADGET:
- dwc->ep0state = EP0_IN_WAIT_NRDY;
- return 0;
- break;
-
- case EP0_OUT_WAIT_GADGET:
- dwc->ep0state = EP0_OUT_WAIT_NRDY;
- return 0;
-
- break;
-
- case EP0_IN_DATA_PHASE:
- case EP0_OUT_DATA_PHASE:
- trb.trbctl = DWC3_TRBCTL_CONTROL_DATA;
- break;
-
- default:
- dev_err(dwc->dev, "%s() can't in state %d\n", __func__,
- dwc->ep0state);
- return -EINVAL;
- }
-
+ trb.trbctl = type;
trb.bplh = buf_dma;
trb.length = len;
return ret;
}
+ dep->flags |= DWC3_EP_BUSY;
dep->res_trans_idx = dwc3_gadget_ep_get_transfer_index(dwc,
dep->number);
static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
struct dwc3_request *req)
{
- struct dwc3 *dwc = dep->dwc;
- int ret;
+ int ret = 0;
req->request.actual = 0;
req->request.status = -EINPROGRESS;
- req->direction = dep->direction;
req->epnum = dep->number;
list_add_tail(&req->list, &dep->request_list);
- if (req->request.length == 0) {
- ret = dwc3_ep0_start_trans(dwc, dep->number,
- dwc->ctrl_req_addr, 0);
- } else if ((req->request.length % dep->endpoint.maxpacket)
- && (dep->number == 0)) {
- dwc->ep0_bounced = true;
-
- WARN_ON(req->request.length > dep->endpoint.maxpacket);
- /*
- * REVISIT in case request length is bigger than EP0
- * wMaxPacketSize, we will need two chained TRBs to handle
- * the transfer.
- */
- ret = dwc3_ep0_start_trans(dwc, dep->number,
- dwc->ep0_bounce_addr, dep->endpoint.maxpacket);
- } else {
- dwc3_map_buffer_to_dma(req);
-
- ret = dwc3_ep0_start_trans(dwc, dep->number,
- req->request.dma, req->request.length);
- }
+ /*
+ * Gadget driver might not be quick enough to queue a request
+ * before we get a Transfer Not Ready event on this endpoint.
+ *
+ * In that case, we will set DWC3_EP_PENDING_REQUEST. When that
+ * flag is set, it's telling us that as soon as Gadget queues the
+ * required request, we should kick the transfer here because the
+ * IRQ we were waiting for is long gone.
+ */
+ if (dep->flags & DWC3_EP_PENDING_REQUEST) {
+ struct dwc3 *dwc = dep->dwc;
+ unsigned direction;
+ u32 type;
+
+ direction = !!(dep->flags & DWC3_EP0_DIR_IN);
+
+ if (dwc->ep0state == EP0_STATUS_PHASE) {
+ type = dwc->three_stage_setup
+ ? DWC3_TRBCTL_CONTROL_STATUS3
+ : DWC3_TRBCTL_CONTROL_STATUS2;
+ } else if (dwc->ep0state == EP0_DATA_PHASE) {
+ type = DWC3_TRBCTL_CONTROL_DATA;
+ } else {
+ /* should never happen */
+ WARN_ON(1);
+ return 0;
+ }
- if (ret < 0) {
- list_del(&req->list);
- dwc3_unmap_buffer_from_dma(req);
+ ret = dwc3_ep0_start_trans(dwc, direction,
+ req->request.dma, req->request.length, type);
+ dep->flags &= ~(DWC3_EP_PENDING_REQUEST |
+ DWC3_EP0_DIR_IN);
}
return ret;
int ret;
- switch (dwc->ep0state) {
- case EP0_IN_DATA_PHASE:
- case EP0_IN_WAIT_GADGET:
- case EP0_IN_WAIT_NRDY:
- case EP0_IN_STATUS_PHASE:
- dep = dwc->eps[1];
- break;
-
- case EP0_OUT_DATA_PHASE:
- case EP0_OUT_WAIT_GADGET:
- case EP0_OUT_WAIT_NRDY:
- case EP0_OUT_STATUS_PHASE:
- dep = dwc->eps[0];
- break;
- default:
- return -EINVAL;
- }
-
spin_lock_irqsave(&dwc->lock, flags);
if (!dep->desc) {
dev_dbg(dwc->dev, "trying to queue request %p to disabled %s\n",
/* stall is always issued on EP0 */
__dwc3_gadget_ep_set_halt(dwc->eps[0], 1);
dwc->eps[0]->flags &= ~DWC3_EP_STALL;
- dwc->ep0state = EP0_IDLE;
+ dwc->ep0state = EP0_SETUP_PHASE;
dwc3_ep0_out_start(dwc);
}
void dwc3_ep0_out_start(struct dwc3 *dwc)
{
- struct dwc3_ep *dep;
int ret;
- dep = dwc->eps[0];
-
- ret = dwc3_ep0_start_trans(dwc, 0, dwc->ctrl_req_addr, 8);
+ ret = dwc3_ep0_start_trans(dwc, 0, dwc->ctrl_req_addr, 8,
+ DWC3_TRBCTL_CONTROL_SETUP);
WARN_ON(ret < 0);
}
-/*
- * Send a zero length packet for the status phase of the control transfer
- */
-static void dwc3_ep0_do_setup_status(struct dwc3 *dwc,
- const struct dwc3_event_depevt *event)
-{
- struct dwc3_ep *dep;
- int ret;
- u32 epnum;
-
- epnum = event->endpoint_number;
- dep = dwc->eps[epnum];
-
- if (epnum)
- dwc->ep0state = EP0_IN_STATUS_PHASE;
- else
- dwc->ep0state = EP0_OUT_STATUS_PHASE;
-
- /*
- * Not sure Why I need a buffer for a zero transfer. Maybe the
- * HW reacts strange on a NULL pointer
- */
- ret = dwc3_ep0_start_trans(dwc, epnum, dwc->ctrl_req_addr, 0);
- if (ret) {
- dev_dbg(dwc->dev, "failed to start transfer, stalling\n");
- dwc3_ep0_stall_and_restart(dwc);
- }
-}
-
static struct dwc3_ep *dwc3_wIndex_to_dep(struct dwc3 *dwc, __le16 wIndex_le)
{
struct dwc3_ep *dep;
static void dwc3_ep0_send_status_response(struct dwc3 *dwc)
{
- u32 epnum;
-
- if (dwc->ep0state == EP0_IN_DATA_PHASE)
- epnum = 1;
- else
- epnum = 0;
-
- dwc3_ep0_start_trans(dwc, epnum, dwc->ctrl_req_addr,
- dwc->ep0_usb_req.length);
+ dwc3_ep0_start_trans(dwc, 1, dwc->ctrl_req_addr,
+ dwc->ep0_usb_req.length,
+ DWC3_TRBCTL_CONTROL_DATA);
dwc->ep0_status_pending = 1;
}
return -EINVAL;
};
- dwc->ep0state = EP0_IN_WAIT_NRDY;
-
return 0;
}
ret = -EINVAL;
break;
}
- dwc->ep0state = EP0_IN_WAIT_NRDY;
+
return ret;
}
goto err;
len = le16_to_cpu(ctrl->wLength);
- if (!len) {
- dwc->ep0state = EP0_IN_WAIT_GADGET;
+ if (!len)
dwc->three_stage_setup = 0;
- } else {
+ else
dwc->three_stage_setup = 1;
- if (ctrl->bRequestType & USB_DIR_IN)
- dwc->ep0state = EP0_IN_DATA_PHASE;
- else
- dwc->ep0state = EP0_OUT_DATA_PHASE;
- }
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD)
ret = dwc3_ep0_std_request(dwc, ctrl);
dep = dwc->eps[epnum];
if (!dwc->ep0_status_pending) {
- r = next_request(&dep->request_list);
+ r = next_request(&dwc->eps[0]->request_list);
ur = &r->request;
} else {
ur = &dwc->ep0_usb_req;
if (dwc->ep0_bounced) {
struct dwc3_ep *ep0 = dwc->eps[0];
- transferred = min(ur->length, dep->endpoint.maxpacket - trb.length);
+ transferred = min_t(u32, ur->length,
+ ep0->endpoint.maxpacket - trb.length);
memcpy(ur->buf, dwc->ep0_bounce, transferred);
dwc->ep0_bounced = false;
} else {
* handle the case where we have to send a zero packet. This
* seems to be case when req.length > maxpacket. Could it be?
*/
- /* The transfer is complete, wait for HOST */
- if (epnum & 1)
- dwc->ep0state = EP0_IN_WAIT_NRDY;
- else
- dwc->ep0state = EP0_OUT_WAIT_NRDY;
-
if (r)
dwc3_gadget_giveback(dep, r, 0);
}
{
struct dwc3_request *r;
struct dwc3_ep *dep;
- u8 epnum;
- epnum = event->endpoint_number;
- dep = dwc->eps[epnum];
+ dep = dwc->eps[0];
if (!list_empty(&dep->request_list)) {
r = next_request(&dep->request_list);
dwc3_gadget_giveback(dep, r, 0);
}
- dwc->ep0state = EP0_IDLE;
+ dwc->ep0state = EP0_SETUP_PHASE;
dwc3_ep0_out_start(dwc);
}
static void dwc3_ep0_xfer_complete(struct dwc3 *dwc,
const struct dwc3_event_depevt *event)
{
+ struct dwc3_ep *dep = dwc->eps[event->endpoint_number];
+
+ dep->flags &= ~DWC3_EP_BUSY;
+
switch (dwc->ep0state) {
- case EP0_IDLE:
+ case EP0_SETUP_PHASE:
+ dev_vdbg(dwc->dev, "Inspecting Setup Bytes\n");
dwc3_ep0_inspect_setup(dwc, event);
break;
- case EP0_IN_DATA_PHASE:
- case EP0_OUT_DATA_PHASE:
+ case EP0_DATA_PHASE:
+ dev_vdbg(dwc->dev, "Data Phase\n");
dwc3_ep0_complete_data(dwc, event);
break;
- case EP0_IN_STATUS_PHASE:
- case EP0_OUT_STATUS_PHASE:
+ case EP0_STATUS_PHASE:
+ dev_vdbg(dwc->dev, "Status Phase\n");
dwc3_ep0_complete_req(dwc, event);
break;
+ default:
+ WARN(true, "UNKNOWN ep0state %d\n", dwc->ep0state);
+ }
+}
- case EP0_IN_WAIT_NRDY:
- case EP0_OUT_WAIT_NRDY:
- case EP0_IN_WAIT_GADGET:
- case EP0_OUT_WAIT_GADGET:
- case EP0_UNCONNECTED:
- case EP0_STALL:
- break;
+static void dwc3_ep0_do_control_setup(struct dwc3 *dwc,
+ const struct dwc3_event_depevt *event)
+{
+ dwc->ep0state = EP0_SETUP_PHASE;
+ dwc3_ep0_out_start(dwc);
+}
+
+static void dwc3_ep0_do_control_data(struct dwc3 *dwc,
+ const struct dwc3_event_depevt *event)
+{
+ struct dwc3_ep *dep;
+ struct dwc3_request *req;
+ int ret;
+
+ dep = dwc->eps[0];
+ dwc->ep0state = EP0_DATA_PHASE;
+
+ if (list_empty(&dep->request_list)) {
+ dev_vdbg(dwc->dev, "pending request for EP0 Data phase\n");
+ dep->flags |= DWC3_EP_PENDING_REQUEST;
+
+ if (event->endpoint_number)
+ dep->flags |= DWC3_EP0_DIR_IN;
+ return;
}
+
+ req = next_request(&dep->request_list);
+ req->direction = !!event->endpoint_number;
+
+ dwc->ep0state = EP0_DATA_PHASE;
+ if (req->request.length == 0) {
+ ret = dwc3_ep0_start_trans(dwc, event->endpoint_number,
+ dwc->ctrl_req_addr, 0,
+ DWC3_TRBCTL_CONTROL_DATA);
+ } else if ((req->request.length % dep->endpoint.maxpacket)
+ && (event->endpoint_number == 0)) {
+ dwc3_map_buffer_to_dma(req);
+
+ WARN_ON(req->request.length > dep->endpoint.maxpacket);
+
+ dwc->ep0_bounced = true;
+
+ /*
+ * REVISIT in case request length is bigger than EP0
+ * wMaxPacketSize, we will need two chained TRBs to handle
+ * the transfer.
+ */
+ ret = dwc3_ep0_start_trans(dwc, event->endpoint_number,
+ dwc->ep0_bounce_addr, dep->endpoint.maxpacket,
+ DWC3_TRBCTL_CONTROL_DATA);
+ } else {
+ dwc3_map_buffer_to_dma(req);
+
+ ret = dwc3_ep0_start_trans(dwc, event->endpoint_number,
+ req->request.dma, req->request.length,
+ DWC3_TRBCTL_CONTROL_DATA);
+ }
+
+ WARN_ON(ret < 0);
}
-static void dwc3_ep0_xfernotready(struct dwc3 *dwc,
+static void dwc3_ep0_do_control_status(struct dwc3 *dwc,
const struct dwc3_event_depevt *event)
{
- switch (dwc->ep0state) {
- case EP0_IN_WAIT_GADGET:
- dwc->ep0state = EP0_IN_WAIT_NRDY;
- break;
- case EP0_OUT_WAIT_GADGET:
- dwc->ep0state = EP0_OUT_WAIT_NRDY;
- break;
+ u32 type;
+ int ret;
- case EP0_IN_WAIT_NRDY:
- case EP0_OUT_WAIT_NRDY:
- dwc3_ep0_do_setup_status(dwc, event);
- break;
+ dwc->ep0state = EP0_STATUS_PHASE;
- case EP0_IDLE:
- case EP0_IN_STATUS_PHASE:
- case EP0_OUT_STATUS_PHASE:
- case EP0_IN_DATA_PHASE:
- case EP0_OUT_DATA_PHASE:
- case EP0_UNCONNECTED:
- case EP0_STALL:
- break;
+ type = dwc->three_stage_setup ? DWC3_TRBCTL_CONTROL_STATUS3
+ : DWC3_TRBCTL_CONTROL_STATUS2;
+
+ ret = dwc3_ep0_start_trans(dwc, event->endpoint_number,
+ dwc->ctrl_req_addr, 0, type);
+
+ WARN_ON(ret < 0);
+}
+
+static void dwc3_ep0_xfernotready(struct dwc3 *dwc,
+ const struct dwc3_event_depevt *event)
+{
+ switch (event->status) {
+ case DEPEVT_STATUS_CONTROL_SETUP:
+ dev_vdbg(dwc->dev, "Control Setup\n");
+ dwc3_ep0_do_control_setup(dwc, event);
+ break;
+ case DEPEVT_STATUS_CONTROL_DATA:
+ dev_vdbg(dwc->dev, "Control Data\n");
+ dwc3_ep0_do_control_data(dwc, event);
+ break;
+ case DEPEVT_STATUS_CONTROL_STATUS:
+ dev_vdbg(dwc->dev, "Control Status\n");
+ dwc3_ep0_do_control_status(dwc, event);
}
}
projects / linux-beck.git / commitdiff