mfhc_op = 0x03, mtc_op = 0x04,
dmtc_op = 0x05, ctc_op = 0x06,
mthc0_op = 0x06, mthc_op = 0x07,
- bc_op = 0x08, cop_op = 0x10,
+ bc_op = 0x08, bc1eqz_op = 0x09,
+ bc1nez_op = 0x0d, cop_op = 0x10,
copm_op = 0x18
};
int __compute_return_epc_for_insn(struct pt_regs *regs,
union mips_instruction insn)
{
- unsigned int bit, fcr31, dspcontrol;
+ unsigned int bit, fcr31, dspcontrol, reg;
long epc = regs->cp0_epc;
int ret = 0;
* And now the FPA/cp1 branch instructions.
*/
case cop1_op:
- preempt_disable();
- if (is_fpu_owner())
- fcr31 = read_32bit_cp1_register(CP1_STATUS);
- else
- fcr31 = current->thread.fpu.fcr31;
- preempt_enable();
-
- bit = (insn.i_format.rt >> 2);
- bit += (bit != 0);
- bit += 23;
- switch (insn.i_format.rt & 3) {
- case 0: /* bc1f */
- case 2: /* bc1fl */
- if (~fcr31 & (1 << bit)) {
- epc = epc + 4 + (insn.i_format.simmediate << 2);
- if (insn.i_format.rt == 2)
- ret = BRANCH_LIKELY_TAKEN;
- } else
+ if (cpu_has_mips_r6 &&
+ ((insn.i_format.rs == bc1eqz_op) ||
+ (insn.i_format.rs == bc1nez_op))) {
+ if (!used_math()) { /* First time FPU user */
+ ret = init_fpu();
+ if (ret && NO_R6EMU) {
+ ret = -ret;
+ break;
+ }
+ ret = 0;
+ set_used_math();
+ }
+ lose_fpu(1); /* Save FPU state for the emulator. */
+ reg = insn.i_format.rt;
+ bit = 0;
+ switch (insn.i_format.rs) {
+ case bc1eqz_op:
+ /* Test bit 0 */
+ if (get_fpr32(¤t->thread.fpu.fpr[reg], 0)
+ & 0x1)
+ bit = 1;
+ break;
+ case bc1nez_op:
+ /* Test bit 0 */
+ if (!(get_fpr32(¤t->thread.fpu.fpr[reg], 0)
+ & 0x1))
+ bit = 1;
+ break;
+ }
+ own_fpu(1);
+ if (bit)
+ epc = epc + 4 +
+ (insn.i_format.simmediate << 2);
+ else
epc += 8;
regs->cp0_epc = epc;
+
break;
+ } else {
- case 1: /* bc1t */
- case 3: /* bc1tl */
- if (fcr31 & (1 << bit)) {
- epc = epc + 4 + (insn.i_format.simmediate << 2);
- if (insn.i_format.rt == 3)
- ret = BRANCH_LIKELY_TAKEN;
- } else
- epc += 8;
- regs->cp0_epc = epc;
+ preempt_disable();
+ if (is_fpu_owner())
+ fcr31 = read_32bit_cp1_register(CP1_STATUS);
+ else
+ fcr31 = current->thread.fpu.fcr31;
+ preempt_enable();
+
+ bit = (insn.i_format.rt >> 2);
+ bit += (bit != 0);
+ bit += 23;
+ switch (insn.i_format.rt & 3) {
+ case 0: /* bc1f */
+ case 2: /* bc1fl */
+ if (~fcr31 & (1 << bit)) {
+ epc = epc + 4 +
+ (insn.i_format.simmediate << 2);
+ if (insn.i_format.rt == 2)
+ ret = BRANCH_LIKELY_TAKEN;
+ } else
+ epc += 8;
+ regs->cp0_epc = epc;
+ break;
+
+ case 1: /* bc1t */
+ case 3: /* bc1tl */
+ if (fcr31 & (1 << bit)) {
+ epc = epc + 4 +
+ (insn.i_format.simmediate << 2);
+ if (insn.i_format.rt == 3)
+ ret = BRANCH_LIKELY_TAKEN;
+ } else
+ epc += 8;
+ regs->cp0_epc = epc;
+ break;
+ }
break;
}
- break;
#ifdef CONFIG_CPU_CAVIUM_OCTEON
case lwc2_op: /* This is bbit0 on Octeon */
if ((regs->regs[insn.i_format.rs] & (1ull<<insn.i_format.rt))
#endif
case cop0_op:
case cop1_op:
+ /* Need to check for R6 bc1nez and bc1eqz branches */
+ if (cpu_has_mips_r6 &&
+ ((insn.i_format.rs == bc1eqz_op) ||
+ (insn.i_format.rs == bc1nez_op))) {
+ bit = 0;
+ switch (insn.i_format.rs) {
+ case bc1eqz_op:
+ if (get_fpr32(¤t->thread.fpu.fpr[insn.i_format.rt], 0) & 0x1)
+ bit = 1;
+ break;
+ case bc1nez_op:
+ if (!(get_fpr32(¤t->thread.fpu.fpr[insn.i_format.rt], 0) & 0x1))
+ bit = 1;
+ break;
+ }
+ if (bit)
+ *contpc = regs->cp0_epc +
+ dec_insn.pc_inc +
+ (insn.i_format.simmediate << 2);
+ else
+ *contpc = regs->cp0_epc +
+ dec_insn.pc_inc +
+ dec_insn.next_pc_inc;
+
+ return 1;
+ }
+ /* R2/R6 compatible cop1 instruction. Fall through */
case cop2_op:
case cop1x_op:
if (insn.i_format.rs == bc_op) {