#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/gfp.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <linux/atomic.h>
#if ALLOW_DMA
#include "cs89x0.h"
static char version[] __initdata =
- "cs89x0.c: v2.4.3-pre1 Russell Nelson <nelson@crynwr.com>, Andrew Morton\n";
+ "v2.4.3-pre1 Russell Nelson <nelson@crynwr.com>, Andrew Morton\n";
#define DRV_NAME "cs89x0"
*/
#if defined(CONFIG_MACH_IXDP2351)
#define CS89x0_NONISA_IRQ
-static unsigned int netcard_portlist[] __used __initdata = {IXDP2351_VIRT_CS8900_BASE, 0};
-static unsigned int cs8900_irq_map[] = {IRQ_IXDP2351_CS8900, 0, 0, 0};
+static unsigned int netcard_portlist[] __used __initdata = {
+ IXDP2351_VIRT_CS8900_BASE, 0
+};
+static unsigned int cs8900_irq_map[] = {
+ IRQ_IXDP2351_CS8900, 0, 0, 0
+};
#elif defined(CONFIG_ARCH_IXDP2X01)
#define CS89x0_NONISA_IRQ
-static unsigned int netcard_portlist[] __used __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0};
-static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0};
+static unsigned int netcard_portlist[] __used __initdata = {
+ IXDP2X01_CS8900_VIRT_BASE, 0
+};
+static unsigned int cs8900_irq_map[] = {
+ IRQ_IXDP2X01_CS8900, 0, 0, 0
+};
#else
#ifndef CONFIG_CS89x0_PLATFORM
-static unsigned int netcard_portlist[] __used __initdata =
-{ 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0};
-static unsigned int cs8900_irq_map[] = {10, 11, 12, 5};
+static unsigned int netcard_portlist[] __used __initdata = {
+ 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240,
+ 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0
+};
+static unsigned int cs8900_irq_map[] = {
+ 10, 11, 12, 5
+};
#endif
#endif
static int __init media_fn(char *str)
{
- if (!strcmp(str, "rj45")) g_cs89x0_media__force = FORCE_RJ45;
- else if (!strcmp(str, "aui")) g_cs89x0_media__force = FORCE_AUI;
- else if (!strcmp(str, "bnc")) g_cs89x0_media__force = FORCE_BNC;
+ if (!strcmp(str, "rj45"))
+ g_cs89x0_media__force = FORCE_RJ45;
+ else if (!strcmp(str, "aui"))
+ g_cs89x0_media__force = FORCE_AUI;
+ else if (!strcmp(str, "bnc"))
+ g_cs89x0_media__force = FORCE_BNC;
+
return 1;
}
{
int i;
- if (net_debug > 3) printk("EEPROM data from %x for %x:\n", off, len);
+ if (net_debug > 3)
+ printk("EEPROM data from %x for %x:\n", off, len);
for (i = 0; i < len; i++) {
- if (wait_eeprom_ready(dev) < 0) return -1;
+ if (wait_eeprom_ready(dev) < 0)
+ return -1;
/* Now send the EEPROM read command and EEPROM location to read */
writereg(dev, PP_EECMD, (off + i) | EEPROM_READ_CMD);
- if (wait_eeprom_ready(dev) < 0) return -1;
+ if (wait_eeprom_ready(dev) < 0)
+ return -1;
buffer[i] = readreg(dev, PP_EEData);
- if (net_debug > 3) printk("%04x ", buffer[i]);
+ if (net_debug > 3)
+ printk("%04x ", buffer[i]);
}
- if (net_debug > 3) printk("\n");
+ if (net_debug > 3)
+ printk("\n");
return 0;
}
cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
{
struct net_local *lp = netdev_priv(dev);
- static unsigned version_printed;
int i;
int tmp;
unsigned rev_type = 0;
if (lp->chip_type != CS8900 && lp->chip_revision >= 'C')
lp->send_cmd = TX_NOW;
- if (net_debug && version_printed++ == 0)
- printk(version);
+ if (net_debug)
+ printk_once(version);
pr_info("%s: cs89%c0%s rev %c found at %p ",
dev->name,
*/
if ((readreg(dev, PP_SelfST) & (EEPROM_OK | EEPROM_PRESENT)) ==
- (EEPROM_OK|EEPROM_PRESENT)) {
+ (EEPROM_OK | EEPROM_PRESENT)) {
/* Load the MAC. */
for (i = 0; i < ETH_ALEN / 2; i++) {
unsigned int Addr;
*/
/* get transmission control word but keep the autonegotiation bits */
- if (!lp->auto_neg_cnf) lp->auto_neg_cnf = eeprom_buff[AUTO_NEG_CNF_OFFSET/2];
+ if (!lp->auto_neg_cnf)
+ lp->auto_neg_cnf = eeprom_buff[AUTO_NEG_CNF_OFFSET / 2];
/* Store adapter configuration */
- if (!lp->adapter_cnf) lp->adapter_cnf = eeprom_buff[ADAPTER_CNF_OFFSET/2];
+ if (!lp->adapter_cnf)
+ lp->adapter_cnf = eeprom_buff[ADAPTER_CNF_OFFSET / 2];
/* Store ISA configuration */
- lp->isa_config = eeprom_buff[ISA_CNF_OFFSET/2];
- dev->mem_start = eeprom_buff[PACKET_PAGE_OFFSET/2] << 8;
+ lp->isa_config = eeprom_buff[ISA_CNF_OFFSET / 2];
+ dev->mem_start = eeprom_buff[PACKET_PAGE_OFFSET / 2] << 8;
/* eeprom_buff has 32-bit ints, so we can't just memcpy it */
/* store the initial memory base address */
/* allow them to force multiple transceivers. If they force multiple, autosense */
{
int count = 0;
- if (lp->force & FORCE_RJ45) {lp->adapter_cnf |= A_CNF_10B_T; count++; }
- if (lp->force & FORCE_AUI) {lp->adapter_cnf |= A_CNF_AUI; count++; }
- if (lp->force & FORCE_BNC) {lp->adapter_cnf |= A_CNF_10B_2; count++; }
- if (count > 1) {lp->adapter_cnf |= A_CNF_MEDIA_AUTO; }
- else if (lp->force & FORCE_RJ45){lp->adapter_cnf |= A_CNF_MEDIA_10B_T; }
- else if (lp->force & FORCE_AUI) {lp->adapter_cnf |= A_CNF_MEDIA_AUI; }
- else if (lp->force & FORCE_BNC) {lp->adapter_cnf |= A_CNF_MEDIA_10B_2; }
+ if (lp->force & FORCE_RJ45) {
+ lp->adapter_cnf |= A_CNF_10B_T;
+ count++;
+ }
+ if (lp->force & FORCE_AUI) {
+ lp->adapter_cnf |= A_CNF_AUI;
+ count++;
+ }
+ if (lp->force & FORCE_BNC) {
+ lp->adapter_cnf |= A_CNF_10B_2;
+ count++;
+ }
+ if (count > 1)
+ lp->adapter_cnf |= A_CNF_MEDIA_AUTO;
+ else if (lp->force & FORCE_RJ45)
+ lp->adapter_cnf |= A_CNF_MEDIA_10B_T;
+ else if (lp->force & FORCE_AUI)
+ lp->adapter_cnf |= A_CNF_MEDIA_AUI;
+ else if (lp->force & FORCE_BNC)
+ lp->adapter_cnf |= A_CNF_MEDIA_10B_2;
}
if (net_debug > 1)
IRQ_MAP_LEN / 2,
irq_map_buff) >= 0) {
if ((irq_map_buff[0] & 0xff) == PNP_IRQ_FRMT)
- lp->irq_map = (irq_map_buff[0] >> 8) | (irq_map_buff[1] << 8);
+ lp->irq_map = ((irq_map_buff[0] >> 8) |
+ (irq_map_buff[1] << 8));
}
#endif
}
if (lp->use_dma) {
get_dma_channel(dev);
printk(", DMA %d", dev->dma);
- }
- else
+ } else
#endif
- {
printk(", programmed I/O");
- }
/* print the ethernet address. */
- printk(", MAC %pM", dev->dev_addr);
+ printk(", MAC %pM\n", dev->dev_addr);
dev->netdev_ops = &net_ops;
dev->watchdog_timeo = HZ;
- printk("\n");
if (net_debug)
printk("cs89x0_probe1() successful\n");
if (ioport & 1) {
if (net_debug > 1)
pr_info("%s: odd ioaddr 0x%lx\n", dev->name, ioport);
- if ((ioport & 2) != 2)
+ if ((ioport & 2) != 2) {
if ((ioread16(io_mem + ADD_PORT) & ADD_MASK) !=
ADD_SIG) {
pr_err("%s: bad signature 0x%x\n",
ret = -ENODEV;
goto unmap;
}
+ }
}
ret = cs89x0_probe1(dev, io_mem, modular);
#if ALLOW_DMA
-#define dma_page_eq(ptr1, ptr2) ((long)(ptr1)>>17 == (long)(ptr2)>>17)
+#define dma_page_eq(ptr1, ptr2) ((long)(ptr1) >> 17 == (long)(ptr2) >> 17)
static void
get_dma_channel(struct net_device *dev)
struct net_local *lp = netdev_priv(dev);
if ((lp->isa_config & ANY_ISA_DMA) == 0)
return;
- if (chip_type == CS8900) {
- writereg(dev, PP_CS8900_ISADMA, dma-5);
- } else {
+ if (chip_type == CS8900)
+ writereg(dev, PP_CS8900_ISADMA, dma - 5);
+ else
writereg(dev, PP_CS8920_ISADMA, dma);
- }
}
static void
int status, length;
unsigned char *bp = lp->rx_dma_ptr;
- status = bp[0] + (bp[1]<<8);
- length = bp[2] + (bp[3]<<8);
+ status = bp[0] + (bp[1] << 8);
+ length = bp[2] + (bp[3] << 8);
bp += 4;
if (net_debug > 5) {
printk("%s: receiving DMA packet at %lx, status %x, length %x\n",
skb = netdev_alloc_skb(dev, length + 2);
if (skb == NULL) {
if (net_debug) /* I don't think we want to do this to a stressed system */
- printk("%s: Memory squeeze, dropping packet.\n", dev->name);
+ printk("%s: Memory squeeze, dropping packet\n",
+ dev->name);
dev->stats.rx_dropped++;
/* AKPM: advance bp to the next frame */
skip_this_frame:
bp += (length + 3) & ~3;
- if (bp >= lp->end_dma_buff) bp -= lp->dmasize*1024;
+ if (bp >= lp->end_dma_buff)
+ bp -= lp->dmasize * 1024;
lp->rx_dma_ptr = bp;
return;
}
memcpy(skb_put(skb, length), bp, length);
}
bp += (length + 3) & ~3;
- if (bp >= lp->end_dma_buff) bp -= lp->dmasize*1024;
+ if (bp >= lp->end_dma_buff)
+ bp -= lp->dmasize*1024;
lp->rx_dma_ptr = bp;
if (net_debug > 3) {
printk("%s: received %d byte DMA packet of type %x\n",
dev->name, length,
- (skb->data[ETH_ALEN + ETH_ALEN] << 8) | skb->data[ETH_ALEN + ETH_ALEN + 1]);
+ ((skb->data[ETH_ALEN + ETH_ALEN] << 8) |
+ skb->data[ETH_ALEN + ETH_ALEN + 1]));
}
skb->protocol = eth_type_trans(skb, dev);
netif_rx(skb);
/* Wait until the chip is reset */
reset_start_time = jiffies;
- while ((readreg(dev, PP_SelfST) & INIT_DONE) == 0 && jiffies - reset_start_time < 2)
+ while ((readreg(dev, PP_SelfST) & INIT_DONE) == 0 &&
+ jiffies - reset_start_time < 2)
;
#endif /* !CONFIG_MACH_MX31ADS */
}
unsigned int selfcontrol;
int timenow = jiffies;
/* control the DC to DC convertor in the SelfControl register.
- Note: This is hooked up to a general purpose pin, might not
- always be a DC to DC convertor. */
+ * Note: This is hooked up to a general purpose pin, might not
+ * always be a DC to DC convertor.
+ */
selfcontrol = HCB1_ENBL; /* Enable the HCB1 bit as an output */
if (((lp->adapter_cnf & A_CNF_DC_DC_POLARITY) != 0) ^ on_not_off)
int timenow = jiffies;
int fdx;
- if (net_debug > 1) printk("%s: Attempting TP\n", dev->name);
-
- /* If connected to another full duplex capable 10-Base-T card the link pulses
- seem to be lost when the auto detect bit in the LineCTL is set.
- To overcome this the auto detect bit will be cleared whilst testing the
- 10-Base-T interface. This would not be necessary for the sparrow chip but
- is simpler to do it anyway. */
+ if (net_debug > 1)
+ printk("%s: Attempting TP\n", dev->name);
+
+ /* If connected to another full duplex capable 10-Base-T card
+ * the link pulses seem to be lost when the auto detect bit in
+ * the LineCTL is set. To overcome this the auto detect bit will
+ * be cleared whilst testing the 10-Base-T interface. This would
+ * not be necessary for the sparrow chip but is simpler to do it
+ * anyway.
+ */
writereg(dev, PP_LineCTL, lp->linectl & ~AUI_ONLY);
control_dc_dc(dev, 0);
- /* Delay for the hardware to work out if the TP cable is present - 150ms */
- for (timenow = jiffies; jiffies - timenow < 15; )
+ /* Delay for the hardware to work out if the TP cable is present
+ * - 150ms
+ */
+ for (timenow = jiffies; jiffies - timenow < 15;)
;
if ((readreg(dev, PP_LineST) & LINK_OK) == 0)
return DETECTED_NONE;
case FORCE_HALF:
break;
case FORCE_FULL:
- writereg(dev, PP_TestCTL, readreg(dev, PP_TestCTL) | FDX_8900);
+ writereg(dev, PP_TestCTL,
+ readreg(dev, PP_TestCTL) | FDX_8900);
break;
}
fdx = readreg(dev, PP_TestCTL) & FDX_8900;
send_test_pkt(struct net_device *dev)
{
struct net_local *lp = netdev_priv(dev);
- char test_packet[] = { 0,0,0,0,0,0, 0,0,0,0,0,0,
- 0, 46, /* A 46 in network order */
- 0, 0, /* DSAP=0 & SSAP=0 fields */
- 0xf3, 0 /* Control (Test Req + P bit set) */ };
+ char test_packet[] = {
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 46, /* A 46 in network order */
+ 0, 0, /* DSAP=0 & SSAP=0 fields */
+ 0xf3, 0 /* Control (Test Req + P bit set) */
+ };
long timenow = jiffies;
writereg(dev, PP_LineCTL, readreg(dev, PP_LineCTL) | SERIAL_TX_ON);
return 0; /* this shouldn't happen */
/* Write the contents of the packet */
- writewords(lp, TX_FRAME_PORT, test_packet, (ETH_ZLEN+1) >> 1);
+ writewords(lp, TX_FRAME_PORT, test_packet, (ETH_ZLEN + 1) >> 1);
- if (net_debug > 1) printk("Sending test packet ");
+ if (net_debug > 1)
+ printk("Sending test packet ");
/* wait a couple of jiffies for packet to be received */
- for (timenow = jiffies; jiffies - timenow < 3; )
+ for (timenow = jiffies; jiffies - timenow < 3;)
;
if ((readreg(dev, PP_TxEvent) & TX_SEND_OK_BITS) == TX_OK) {
- if (net_debug > 1) printk("succeeded\n");
+ if (net_debug > 1)
+ printk("succeeded\n");
return 1;
}
- if (net_debug > 1) printk("failed\n");
+ if (net_debug > 1)
+ printk("failed\n");
return 0;
}
{
struct net_local *lp = netdev_priv(dev);
- if (net_debug > 1) printk("%s: Attempting AUI\n", dev->name);
+ if (net_debug > 1)
+ printk("%s: Attempting AUI\n", dev->name);
control_dc_dc(dev, 0);
writereg(dev, PP_LineCTL, (lp->linectl & ~AUTO_AUI_10BASET) | AUI_ONLY);
{
struct net_local *lp = netdev_priv(dev);
- if (net_debug > 1) printk("%s: Attempting BNC\n", dev->name);
+ if (net_debug > 1)
+ printk("%s: Attempting BNC\n", dev->name);
control_dc_dc(dev, 1);
writereg(dev, PP_LineCTL, (lp->linectl & ~AUTO_AUI_10BASET) | AUI_ONLY);
for (i = 2; i < CS8920_NO_INTS; i++) {
if ((1 << i) & lp->irq_map) {
- if (request_irq(i, net_interrupt, 0, dev->name, dev) == 0) {
+ if (request_irq(i, net_interrupt, 0, dev->name,
+ dev) == 0) {
dev->irq = i;
write_irq(dev, lp->chip_type, i);
/* writereg(dev, PP_BufCFG, GENERATE_SW_INTERRUPT); */
ret = -EAGAIN;
goto bad_out;
}
- }
- else
- {
+ } else {
#if !defined(CS89x0_NONISA_IRQ) && !defined(CONFIG_CS89x0_PLATFORM)
if (((1 << dev->irq) & lp->irq_map) == 0) {
pr_err("%s: IRQ %d is not in our map of allowable IRQs, which is %x\n",
}
#if ALLOW_DMA
- if (lp->use_dma) {
- if (lp->isa_config & ANY_ISA_DMA) {
- unsigned long flags;
- lp->dma_buff = (unsigned char *)__get_dma_pages(GFP_KERNEL,
- get_order(lp->dmasize * 1024));
-
- if (!lp->dma_buff) {
- pr_err("%s: cannot get %dK memory for DMA\n",
- dev->name, lp->dmasize);
- goto release_irq;
- }
- if (net_debug > 1) {
- printk("%s: dma %lx %lx\n",
- dev->name,
- (unsigned long)lp->dma_buff,
- (unsigned long)isa_virt_to_bus(lp->dma_buff));
- }
- if ((unsigned long) lp->dma_buff >= MAX_DMA_ADDRESS ||
- !dma_page_eq(lp->dma_buff, lp->dma_buff+lp->dmasize*1024-1)) {
- pr_err("%s: not usable as DMA buffer\n",
- dev->name);
- goto release_irq;
- }
- memset(lp->dma_buff, 0, lp->dmasize * 1024); /* Why? */
- if (request_dma(dev->dma, dev->name)) {
- pr_err("%s: cannot get dma channel %d\n",
- dev->name, dev->dma);
- goto release_irq;
- }
- write_dma(dev, lp->chip_type, dev->dma);
- lp->rx_dma_ptr = lp->dma_buff;
- lp->end_dma_buff = lp->dma_buff + lp->dmasize*1024;
- spin_lock_irqsave(&lp->lock, flags);
- disable_dma(dev->dma);
- clear_dma_ff(dev->dma);
- set_dma_mode(dev->dma, DMA_RX_MODE); /* auto_init as well */
- set_dma_addr(dev->dma, isa_virt_to_bus(lp->dma_buff));
- set_dma_count(dev->dma, lp->dmasize*1024);
- enable_dma(dev->dma);
- spin_unlock_irqrestore(&lp->lock, flags);
+ if (lp->use_dma && (lp->isa_config & ANY_ISA_DMA)) {
+ unsigned long flags;
+ lp->dma_buff = (unsigned char *)__get_dma_pages(GFP_KERNEL,
+ get_order(lp->dmasize * 1024));
+ if (!lp->dma_buff) {
+ pr_err("%s: cannot get %dK memory for DMA\n",
+ dev->name, lp->dmasize);
+ goto release_irq;
+ }
+ if (net_debug > 1) {
+ printk("%s: dma %lx %lx\n",
+ dev->name,
+ (unsigned long)lp->dma_buff,
+ (unsigned long)isa_virt_to_bus(lp->dma_buff));
+ }
+ if ((unsigned long)lp->dma_buff >= MAX_DMA_ADDRESS ||
+ !dma_page_eq(lp->dma_buff,
+ lp->dma_buff + lp->dmasize * 1024 - 1)) {
+ pr_err("%s: not usable as DMA buffer\n", dev->name);
+ goto release_irq;
}
+ memset(lp->dma_buff, 0, lp->dmasize * 1024); /* Why? */
+ if (request_dma(dev->dma, dev->name)) {
+ pr_err("%s: cannot get dma channel %d\n",
+ dev->name, dev->dma);
+ goto release_irq;
+ }
+ write_dma(dev, lp->chip_type, dev->dma);
+ lp->rx_dma_ptr = lp->dma_buff;
+ lp->end_dma_buff = lp->dma_buff + lp->dmasize * 1024;
+ spin_lock_irqsave(&lp->lock, flags);
+ disable_dma(dev->dma);
+ clear_dma_ff(dev->dma);
+ set_dma_mode(dev->dma, DMA_RX_MODE); /* auto_init as well */
+ set_dma_addr(dev->dma, isa_virt_to_bus(lp->dma_buff));
+ set_dma_count(dev->dma, lp->dmasize * 1024);
+ enable_dma(dev->dma);
+ spin_unlock_irqrestore(&lp->lock, flags);
}
#endif /* ALLOW_DMA */
/* set the Ethernet address */
for (i = 0; i < ETH_ALEN / 2; i++)
- writereg(dev, PP_IA + i * 2, dev->dev_addr[i * 2] | (dev->dev_addr[i * 2 + 1] << 8));
+ writereg(dev, PP_IA + i * 2,
+ (dev->dev_addr[i * 2] |
+ (dev->dev_addr[i * 2 + 1] << 8)));
/* while we're testing the interface, leave interrupts disabled */
writereg(dev, PP_BusCTL, MEMORY_ON);
/* Set the LineCTL quintuplet based on adapter configuration read from EEPROM */
- if ((lp->adapter_cnf & A_CNF_EXTND_10B_2) && (lp->adapter_cnf & A_CNF_LOW_RX_SQUELCH))
+ if ((lp->adapter_cnf & A_CNF_EXTND_10B_2) &&
+ (lp->adapter_cnf & A_CNF_LOW_RX_SQUELCH))
lp->linectl = LOW_RX_SQUELCH;
else
lp->linectl = 0;
/* check to make sure that they have the "right" hardware available */
switch (lp->adapter_cnf & A_CNF_MEDIA_TYPE) {
- case A_CNF_MEDIA_10B_T: result = lp->adapter_cnf & A_CNF_10B_T; break;
- case A_CNF_MEDIA_AUI: result = lp->adapter_cnf & A_CNF_AUI; break;
- case A_CNF_MEDIA_10B_2: result = lp->adapter_cnf & A_CNF_10B_2; break;
- default: result = lp->adapter_cnf & (A_CNF_10B_T | A_CNF_AUI | A_CNF_10B_2);
+ case A_CNF_MEDIA_10B_T:
+ result = lp->adapter_cnf & A_CNF_10B_T;
+ break;
+ case A_CNF_MEDIA_AUI:
+ result = lp->adapter_cnf & A_CNF_AUI;
+ break;
+ case A_CNF_MEDIA_10B_2:
+ result = lp->adapter_cnf & A_CNF_10B_2;
+ break;
+ default:
+ result = lp->adapter_cnf & (A_CNF_10B_T |
+ A_CNF_AUI |
+ A_CNF_10B_2);
}
if (!result) {
pr_err("%s: EEPROM is configured for unavailable media\n",
release_irq:
release_dma_buff(lp);
#endif
- writereg(dev, PP_LineCTL, readreg(dev, PP_LineCTL) & ~(SERIAL_TX_ON | SERIAL_RX_ON));
+ writereg(dev, PP_LineCTL,
+ readreg(dev, PP_LineCTL) & ~(SERIAL_TX_ON | SERIAL_RX_ON));
free_irq(dev->irq, dev);
ret = -EAGAIN;
goto bad_out;
break;
case A_CNF_MEDIA_AUTO:
writereg(dev, PP_LineCTL, lp->linectl | AUTO_AUI_10BASET);
- if (lp->adapter_cnf & A_CNF_10B_T)
- if ((result = detect_tp(dev)) != DETECTED_NONE)
+ if (lp->adapter_cnf & A_CNF_10B_T) {
+ result = detect_tp(dev);
+ if (result != DETECTED_NONE)
break;
- if (lp->adapter_cnf & A_CNF_AUI)
- if ((result = detect_aui(dev)) != DETECTED_NONE)
+ }
+ if (lp->adapter_cnf & A_CNF_AUI) {
+ result = detect_aui(dev);
+ if (result != DETECTED_NONE)
break;
- if (lp->adapter_cnf & A_CNF_10B_2)
- if ((result = detect_bnc(dev)) != DETECTED_NONE)
+ }
+ if (lp->adapter_cnf & A_CNF_10B_2) {
+ result = detect_bnc(dev);
+ if (result != DETECTED_NONE)
break;
+ }
pr_err("%s: no media detected\n", dev->name);
goto release_dma;
}
}
/* Turn on both receive and transmit operations */
- writereg(dev, PP_LineCTL, readreg(dev, PP_LineCTL) | SERIAL_RX_ON | SERIAL_TX_ON);
+ writereg(dev, PP_LineCTL,
+ readreg(dev, PP_LineCTL) | SERIAL_RX_ON | SERIAL_TX_ON);
/* Receive only error free packets addressed to this card */
lp->rx_mode = 0;
#endif
writereg(dev, PP_RxCFG, lp->curr_rx_cfg);
- writereg(dev, PP_TxCFG, TX_LOST_CRS_ENBL | TX_SQE_ERROR_ENBL | TX_OK_ENBL |
- TX_LATE_COL_ENBL | TX_JBR_ENBL | TX_ANY_COL_ENBL | TX_16_COL_ENBL);
+ writereg(dev, PP_TxCFG, (TX_LOST_CRS_ENBL |
+ TX_SQE_ERROR_ENBL |
+ TX_OK_ENBL |
+ TX_LATE_COL_ENBL |
+ TX_JBR_ENBL |
+ TX_ANY_COL_ENBL |
+ TX_16_COL_ENBL));
- writereg(dev, PP_BufCFG, READY_FOR_TX_ENBL | RX_MISS_COUNT_OVRFLOW_ENBL |
+ writereg(dev, PP_BufCFG, (READY_FOR_TX_ENBL |
+ RX_MISS_COUNT_OVRFLOW_ENBL |
#if ALLOW_DMA
- dma_bufcfg(dev) |
+ dma_bufcfg(dev) |
#endif
- TX_COL_COUNT_OVRFLOW_ENBL | TX_UNDERRUN_ENBL);
+ TX_COL_COUNT_OVRFLOW_ENBL |
+ TX_UNDERRUN_ENBL));
/* now that we've got our act together, enable everything */
- writereg(dev, PP_BusCTL, ENABLE_IRQ
- | (dev->mem_start ? MEMORY_ON : 0) /* turn memory on */
+ writereg(dev, PP_BusCTL, (ENABLE_IRQ
+ | (dev->mem_start ? MEMORY_ON : 0) /* turn memory on */
#if ALLOW_DMA
- | dma_busctl(dev)
+ | dma_busctl(dev)
#endif
- );
+ ));
netif_start_queue(dev);
if (net_debug > 1)
printk("cs89x0: net_open() succeeded\n");
{
/* If we get here, some higher level has decided we are broken.
There should really be a "kick me" function call instead. */
- if (net_debug > 0) printk("%s: transmit timed out, %s?\n", dev->name,
- tx_done(dev) ? "IRQ conflict ?" : "network cable problem");
+ if (net_debug > 0)
+ printk("%s: transmit timed out, %s?\n",
+ dev->name,
+ tx_done(dev) ? "IRQ conflict" : "network cable problem");
/* Try to restart the adaptor. */
netif_wake_queue(dev);
}
if (net_debug > 3) {
printk("%s: sent %d byte packet of type %x\n",
dev->name, skb->len,
- (skb->data[ETH_ALEN + ETH_ALEN] << 8) | skb->data[ETH_ALEN + ETH_ALEN + 1]);
+ ((skb->data[ETH_ALEN + ETH_ALEN] << 8) |
+ skb->data[ETH_ALEN + ETH_ALEN + 1]));
}
/* keep the upload from being interrupted, since we
- ask the chip to start transmitting before the
- whole packet has been completely uploaded. */
+ * ask the chip to start transmitting before the
+ * whole packet has been completely uploaded.
+ */
spin_lock_irqsave(&lp->lock, flags);
netif_stop_queue(dev);
*/
spin_unlock_irqrestore(&lp->lock, flags);
- if (net_debug) printk("cs89x0: Tx buffer not free!\n");
+ if (net_debug)
+ printk("cs89x0: Tx buffer not free!\n");
return NETDEV_TX_BUSY;
}
/* Write the contents of the packet */
- writewords(lp, TX_FRAME_PORT, skb->data, (skb->len+1) >> 1);
+ writewords(lp, TX_FRAME_PORT, skb->data, (skb->len + 1) >> 1);
spin_unlock_irqrestore(&lp->lock, flags);
dev->stats.tx_bytes += skb->len;
dev_kfree_skb(skb);
* We also DO NOT call netif_start_queue().
*
* Either of these would cause another bottom half run through
- * net_send_packet() before this packet has fully gone out. That causes
- * us to hit the "Gasp!" above and the send is rescheduled. it runs like
- * a dog. We just return and wait for the Tx completion interrupt handler
- * to restart the netdevice layer
+ * net_send_packet() before this packet has fully gone out.
+ * That causes us to hit the "Gasp!" above and the send is rescheduled.
+ * it runs like a dog. We just return and wait for the Tx completion
+ * interrupt handler to restart the netdevice layer
*/
return NETDEV_TX_OK;
* vista, baby!
*/
while ((status = ioread16(lp->virt_addr + ISQ_PORT))) {
- if (net_debug > 4)printk("%s: event=%04x\n", dev->name, status);
+ if (net_debug > 4)
+ printk("%s: event=%04x\n", dev->name, status);
handled = 1;
switch (status & ISQ_EVENT_MASK) {
case ISQ_RECEIVER_EVENT:
netif_wake_queue(dev); /* Inform upper layers. */
}
if (status & TX_UNDERRUN) {
- if (net_debug > 0) printk("%s: transmit underrun\n", dev->name);
+ if (net_debug > 0)
+ printk("%s: transmit underrun\n",
+ dev->name);
lp->send_underrun++;
- if (lp->send_underrun == 3) lp->send_cmd = TX_AFTER_381;
- else if (lp->send_underrun == 6) lp->send_cmd = TX_AFTER_ALL;
+ if (lp->send_underrun == 3)
+ lp->send_cmd = TX_AFTER_381;
+ else if (lp->send_underrun == 6)
+ lp->send_cmd = TX_AFTER_ALL;
/* transmit cycle is done, although
* frame wasn't transmitted - this
* avoids having to wait for the upper
int count = readreg(dev, PP_DmaFrameCnt);
while (count) {
if (net_debug > 5)
- printk("%s: receiving %d DMA frames\n", dev->name, count);
+ printk("%s: receiving %d DMA frames\n",
+ dev->name, count);
if (net_debug > 2 && count > 1)
- printk("%s: receiving %d DMA frames\n", dev->name, count);
+ printk("%s: receiving %d DMA frames\n",
+ dev->name, count);
dma_rx(dev);
if (--count == 0)
count = readreg(dev, PP_DmaFrameCnt);
if (net_debug > 2 && count > 0)
- printk("%s: continuing with %d DMA frames\n", dev->name, count);
+ printk("%s: continuing with %d DMA frames\n",
+ dev->name, count);
}
}
#endif
dev->stats.rx_length_errors++;
if (status & RX_EXTRA_DATA)
dev->stats.rx_length_errors++;
- if ((status & RX_CRC_ERROR) && !(status & (RX_EXTRA_DATA|RX_RUNT)))
+ if ((status & RX_CRC_ERROR) && !(status & (RX_EXTRA_DATA | RX_RUNT)))
/* per str 172 */
dev->stats.rx_crc_errors++;
if (status & RX_DRIBBLE)
if (net_debug > 3) {
printk("%s: received %d byte packet of type %x\n",
dev->name, length,
- (skb->data[ETH_ALEN + ETH_ALEN] << 8) | skb->data[ETH_ALEN + ETH_ALEN + 1]);
+ (skb->data[ETH_ALEN + ETH_ALEN] << 8) |
+ skb->data[ETH_ALEN + ETH_ALEN + 1]);
}
skb->protocol = eth_type_trans(skb, dev);
static void release_dma_buff(struct net_local *lp)
{
if (lp->dma_buff) {
- free_pages((unsigned long)(lp->dma_buff), get_order(lp->dmasize * 1024));
+ free_pages((unsigned long)(lp->dma_buff),
+ get_order(lp->dmasize * 1024));
lp->dma_buff = NULL;
}
}
unsigned long flags;
spin_lock_irqsave(&lp->lock, flags);
- if (dev->flags&IFF_PROMISC)
- {
+ if (dev->flags & IFF_PROMISC)
lp->rx_mode = RX_ALL_ACCEPT;
- }
else if ((dev->flags & IFF_ALLMULTI) || !netdev_mc_empty(dev))
- {
- /* The multicast-accept list is initialized to accept-all, and we
- rely on higher-level filtering for now. */
+ /* The multicast-accept list is initialized to accept-all,
+ * and we rely on higher-level filtering for now.
+ */
lp->rx_mode = RX_MULTCAST_ACCEPT;
- }
else
lp->rx_mode = 0;
writereg(dev, PP_RxCTL, DEF_RX_ACCEPT | lp->rx_mode);
- /* in promiscuous mode, we accept errored packets, so we have to enable interrupts on them also */
- writereg(dev, PP_RxCFG, lp->curr_rx_cfg |
- (lp->rx_mode == RX_ALL_ACCEPT ? (RX_CRC_ERROR_ENBL|RX_RUNT_ENBL|RX_EXTRA_DATA_ENBL) : 0));
+ /* in promiscuous mode, we accept errored packets,
+ * so we have to enable interrupts on them also
+ */
+ writereg(dev, PP_RxCFG,
+ (lp->curr_rx_cfg |
+ (lp->rx_mode == RX_ALL_ACCEPT)
+ ? (RX_CRC_ERROR_ENBL | RX_RUNT_ENBL | RX_EXTRA_DATA_ENBL)
+ : 0));
spin_unlock_irqrestore(&lp->lock, flags);
}
-
static int set_mac_address(struct net_device *dev, void *p)
{
int i;
memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
if (net_debug)
- printk("%s: Setting MAC address to %pM.\n",
+ printk("%s: Setting MAC address to %pM\n",
dev->name, dev->dev_addr);
/* set the Ethernet address */
for (i = 0; i < ETH_ALEN / 2; i++)
- writereg(dev, PP_IA + i * 2, dev->dev_addr[i * 2] | (dev->dev_addr[i * 2 + 1] << 8));
+ writereg(dev, PP_IA + i * 2,
+ (dev->dev_addr[i * 2] |
+ (dev->dev_addr[i * 2 + 1] << 8)));
return 0;
}
mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
dev->irq = platform_get_irq(pdev, 0);
if (mem_res == NULL || dev->irq <= 0) {
- dev_warn(&dev->dev, "memory/interrupt resource missing.\n");
+ dev_warn(&dev->dev, "memory/interrupt resource missing\n");
err = -ENXIO;
goto free;
}
lp->size = resource_size(mem_res);
if (!request_mem_region(mem_res->start, lp->size, DRV_NAME)) {
- dev_warn(&dev->dev, "request_mem_region() failed.\n");
+ dev_warn(&dev->dev, "request_mem_region() failed\n");
err = -EBUSY;
goto free;
}
virt_addr = ioremap(mem_res->start, lp->size);
if (!virt_addr) {
- dev_warn(&dev->dev, "ioremap() failed.\n");
+ dev_warn(&dev->dev, "ioremap() failed\n");
err = -ENOMEM;
goto release;
}
err = cs89x0_probe1(dev, virt_addr, 0);
if (err) {
- dev_warn(&dev->dev, "no cs8900 or cs8920 detected.\n");
+ dev_warn(&dev->dev, "no cs8900 or cs8920 detected\n");
goto unmap;
}
projects / karo-tx-linux.git / commitdiff