+++ /dev/null
-/* linux/arch/arm/mach-exynos4/mach-armlex4210.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/gpio.h>
-#include <linux/io.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/smsc911x.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
-#include <plat/regs-serial.h>
-#include <plat/regs-srom.h>
-#include <plat/sdhci.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include "common.h"
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define ARMLEX4210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
- S3C2410_UCON_RXILEVEL | \
- S3C2410_UCON_TXIRQMODE | \
- S3C2410_UCON_RXIRQMODE | \
- S3C2410_UCON_RXFIFO_TOI | \
- S3C2443_UCON_RXERR_IRQEN)
-
-#define ARMLEX4210_ULCON_DEFAULT S3C2410_LCON_CS8
-
-#define ARMLEX4210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
- S5PV210_UFCON_TXTRIG4 | \
- S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg armlex4210_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = ARMLEX4210_UCON_DEFAULT,
- .ulcon = ARMLEX4210_ULCON_DEFAULT,
- .ufcon = ARMLEX4210_UFCON_DEFAULT,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = ARMLEX4210_UCON_DEFAULT,
- .ulcon = ARMLEX4210_ULCON_DEFAULT,
- .ufcon = ARMLEX4210_UFCON_DEFAULT,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = ARMLEX4210_UCON_DEFAULT,
- .ulcon = ARMLEX4210_ULCON_DEFAULT,
- .ufcon = ARMLEX4210_UFCON_DEFAULT,
- },
- [3] = {
- .hwport = 3,
- .flags = 0,
- .ucon = ARMLEX4210_UCON_DEFAULT,
- .ulcon = ARMLEX4210_ULCON_DEFAULT,
- .ufcon = ARMLEX4210_UFCON_DEFAULT,
- },
-};
-
-static struct s3c_sdhci_platdata armlex4210_hsmmc0_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_PERMANENT,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT
- .max_width = 8,
- .host_caps = MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata armlex4210_hsmmc2_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_GPIO,
- .ext_cd_gpio = EXYNOS4_GPX2(5),
- .ext_cd_gpio_invert = 1,
- .max_width = 4,
-};
-
-static struct s3c_sdhci_platdata armlex4210_hsmmc3_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_PERMANENT,
- .max_width = 4,
-};
-
-static void __init armlex4210_sdhci_init(void)
-{
- s3c_sdhci0_set_platdata(&armlex4210_hsmmc0_pdata);
- s3c_sdhci2_set_platdata(&armlex4210_hsmmc2_pdata);
- s3c_sdhci3_set_platdata(&armlex4210_hsmmc3_pdata);
-}
-
-static void __init armlex4210_wlan_init(void)
-{
- /* enable */
- s3c_gpio_cfgpin(EXYNOS4_GPX2(0), S3C_GPIO_SFN(0xf));
- s3c_gpio_setpull(EXYNOS4_GPX2(0), S3C_GPIO_PULL_UP);
-
- /* reset */
- s3c_gpio_cfgpin(EXYNOS4_GPX1(6), S3C_GPIO_SFN(0xf));
- s3c_gpio_setpull(EXYNOS4_GPX1(6), S3C_GPIO_PULL_UP);
-
- /* wakeup */
- s3c_gpio_cfgpin(EXYNOS4_GPX1(5), S3C_GPIO_SFN(0xf));
- s3c_gpio_setpull(EXYNOS4_GPX1(5), S3C_GPIO_PULL_UP);
-}
-
-static struct resource armlex4210_smsc911x_resources[] = {
- [0] = DEFINE_RES_MEM(EXYNOS4_PA_SROM_BANK(3), SZ_64K),
- [1] = DEFINE_RES_NAMED(IRQ_EINT(27), 1, NULL, IORESOURCE_IRQ \
- | IRQF_TRIGGER_HIGH),
-};
-
-static struct smsc911x_platform_config smsc9215_config = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
- .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
-};
-
-static struct platform_device armlex4210_smsc911x = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(armlex4210_smsc911x_resources),
- .resource = armlex4210_smsc911x_resources,
- .dev = {
- .platform_data = &smsc9215_config,
- },
-};
-
-static struct platform_device *armlex4210_devices[] __initdata = {
- &s3c_device_hsmmc0,
- &s3c_device_hsmmc2,
- &s3c_device_hsmmc3,
- &s3c_device_rtc,
- &s3c_device_wdt,
- &armlex4210_smsc911x,
- &exynos4_device_ahci,
-};
-
-static void __init armlex4210_smsc911x_init(void)
-{
- u32 cs1;
-
- /* configure nCS1 width to 16 bits */
- cs1 = __raw_readl(S5P_SROM_BW) &
- ~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT);
- cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) |
- (0 << S5P_SROM_BW__WAITENABLE__SHIFT) |
- (1 << S5P_SROM_BW__ADDRMODE__SHIFT) |
- (1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) <<
- S5P_SROM_BW__NCS1__SHIFT;
- __raw_writel(cs1, S5P_SROM_BW);
-
- /* set timing for nCS1 suitable for ethernet chip */
- __raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) |
- (0x9 << S5P_SROM_BCX__TACP__SHIFT) |
- (0xc << S5P_SROM_BCX__TCAH__SHIFT) |
- (0x1 << S5P_SROM_BCX__TCOH__SHIFT) |
- (0x6 << S5P_SROM_BCX__TACC__SHIFT) |
- (0x1 << S5P_SROM_BCX__TCOS__SHIFT) |
- (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1);
-}
-
-static void __init armlex4210_map_io(void)
-{
- exynos_init_io(NULL, 0);
- s3c24xx_init_uarts(armlex4210_uartcfgs,
- ARRAY_SIZE(armlex4210_uartcfgs));
-}
-
-static void __init armlex4210_machine_init(void)
-{
- armlex4210_smsc911x_init();
-
- armlex4210_sdhci_init();
-
- armlex4210_wlan_init();
-
- platform_add_devices(armlex4210_devices,
- ARRAY_SIZE(armlex4210_devices));
-}
-
-MACHINE_START(ARMLEX4210, "ARMLEX4210")
- /* Maintainer: Alim Akhtar <alim.akhtar@samsung.com> */
- .atag_offset = 0x100,
- .smp = smp_ops(exynos_smp_ops),
- .init_irq = exynos4_init_irq,
- .map_io = armlex4210_map_io,
- .init_machine = armlex4210_machine_init,
- .init_late = exynos_init_late,
- .init_time = exynos_init_time,
- .restart = exynos4_restart,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-exynos4/mach-nuri.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/i2c/atmel_mxt_ts.h>
-#include <linux/i2c-gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/gpio.h>
-#include <linux/power/max8903_charger.h>
-#include <linux/power/max17042_battery.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/mfd/max8997.h>
-#include <linux/mfd/max8997-private.h>
-#include <linux/mmc/host.h>
-#include <linux/fb.h>
-#include <linux/pwm_backlight.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/mipi-csis.h>
-#include <linux/platform_data/s3c-hsotg.h>
-#include <linux/platform_data/usb-ehci-s5p.h>
-#include <drm/exynos_drm.h>
-
-#include <video/platform_lcd.h>
-#include <video/samsung_fimd.h>
-#include <media/m5mols.h>
-#include <media/s5k6aa.h>
-#include <media/s5p_fimc.h>
-#include <media/v4l2-mediabus.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <plat/adc.h>
-#include <plat/regs-serial.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
-#include <plat/sdhci.h>
-#include <plat/clock.h>
-#include <plat/gpio-cfg.h>
-#include <plat/mfc.h>
-#include <plat/fimc-core.h>
-#include <plat/camport.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include "common.h"
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define NURI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
- S3C2410_UCON_RXILEVEL | \
- S3C2410_UCON_TXIRQMODE | \
- S3C2410_UCON_RXIRQMODE | \
- S3C2410_UCON_RXFIFO_TOI | \
- S3C2443_UCON_RXERR_IRQEN)
-
-#define NURI_ULCON_DEFAULT S3C2410_LCON_CS8
-
-#define NURI_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
- S5PV210_UFCON_TXTRIG256 | \
- S5PV210_UFCON_RXTRIG256)
-
-enum fixed_regulator_id {
- FIXED_REG_ID_MMC = 0,
- FIXED_REG_ID_MAX8903,
- FIXED_REG_ID_CAM_A28V,
- FIXED_REG_ID_CAM_12V,
- FIXED_REG_ID_CAM_VT_15V,
-};
-
-static struct s3c2410_uartcfg nuri_uartcfgs[] __initdata = {
- {
- .hwport = 0,
- .ucon = NURI_UCON_DEFAULT,
- .ulcon = NURI_ULCON_DEFAULT,
- .ufcon = NURI_UFCON_DEFAULT,
- },
- {
- .hwport = 1,
- .ucon = NURI_UCON_DEFAULT,
- .ulcon = NURI_ULCON_DEFAULT,
- .ufcon = NURI_UFCON_DEFAULT,
- },
- {
- .hwport = 2,
- .ucon = NURI_UCON_DEFAULT,
- .ulcon = NURI_ULCON_DEFAULT,
- .ufcon = NURI_UFCON_DEFAULT,
- },
- {
- .hwport = 3,
- .ucon = NURI_UCON_DEFAULT,
- .ulcon = NURI_ULCON_DEFAULT,
- .ufcon = NURI_UFCON_DEFAULT,
- },
-};
-
-/* eMMC */
-static struct s3c_sdhci_platdata nuri_hsmmc0_data __initdata = {
- .max_width = 8,
- .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
- MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
- MMC_CAP_ERASE),
- .cd_type = S3C_SDHCI_CD_PERMANENT,
-};
-
-static struct regulator_consumer_supply emmc_supplies[] = {
- REGULATOR_SUPPLY("vmmc", "exynos4-sdhci.0"),
- REGULATOR_SUPPLY("vmmc", "dw_mmc"),
-};
-
-static struct regulator_init_data emmc_fixed_voltage_init_data = {
- .constraints = {
- .name = "VMEM_VDD_2.8V",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(emmc_supplies),
- .consumer_supplies = emmc_supplies,
-};
-
-static struct fixed_voltage_config emmc_fixed_voltage_config = {
- .supply_name = "MASSMEMORY_EN (inverted)",
- .microvolts = 2800000,
- .gpio = EXYNOS4_GPL1(1),
- .enable_high = false,
- .init_data = &emmc_fixed_voltage_init_data,
-};
-
-static struct platform_device emmc_fixed_voltage = {
- .name = "reg-fixed-voltage",
- .id = FIXED_REG_ID_MMC,
- .dev = {
- .platform_data = &emmc_fixed_voltage_config,
- },
-};
-
-/* SD */
-static struct s3c_sdhci_platdata nuri_hsmmc2_data __initdata = {
- .max_width = 4,
- .host_caps = MMC_CAP_4_BIT_DATA |
- MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
- .ext_cd_gpio = EXYNOS4_GPX3(3), /* XEINT_27 */
- .ext_cd_gpio_invert = 1,
- .cd_type = S3C_SDHCI_CD_GPIO,
-};
-
-/* WLAN */
-static struct s3c_sdhci_platdata nuri_hsmmc3_data __initdata = {
- .max_width = 4,
- .host_caps = MMC_CAP_4_BIT_DATA |
- MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
- .cd_type = S3C_SDHCI_CD_EXTERNAL,
-};
-
-static void __init nuri_sdhci_init(void)
-{
- s3c_sdhci0_set_platdata(&nuri_hsmmc0_data);
- s3c_sdhci2_set_platdata(&nuri_hsmmc2_data);
- s3c_sdhci3_set_platdata(&nuri_hsmmc3_data);
-}
-
-/* GPIO KEYS */
-static struct gpio_keys_button nuri_gpio_keys_tables[] = {
- {
- .code = KEY_VOLUMEUP,
- .gpio = EXYNOS4_GPX2(0), /* XEINT16 */
- .desc = "gpio-keys: KEY_VOLUMEUP",
- .type = EV_KEY,
- .active_low = 1,
- .debounce_interval = 1,
- }, {
- .code = KEY_VOLUMEDOWN,
- .gpio = EXYNOS4_GPX2(1), /* XEINT17 */
- .desc = "gpio-keys: KEY_VOLUMEDOWN",
- .type = EV_KEY,
- .active_low = 1,
- .debounce_interval = 1,
- }, {
- .code = KEY_POWER,
- .gpio = EXYNOS4_GPX2(7), /* XEINT23 */
- .desc = "gpio-keys: KEY_POWER",
- .type = EV_KEY,
- .active_low = 1,
- .wakeup = 1,
- .debounce_interval = 1,
- },
-};
-
-static struct gpio_keys_platform_data nuri_gpio_keys_data = {
- .buttons = nuri_gpio_keys_tables,
- .nbuttons = ARRAY_SIZE(nuri_gpio_keys_tables),
-};
-
-static struct platform_device nuri_gpio_keys = {
- .name = "gpio-keys",
- .dev = {
- .platform_data = &nuri_gpio_keys_data,
- },
-};
-
-#ifdef CONFIG_DRM_EXYNOS
-static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
- .panel = {
- .timing = {
- .xres = 1024,
- .yres = 600,
- .hsync_len = 40,
- .left_margin = 79,
- .right_margin = 200,
- .vsync_len = 10,
- .upper_margin = 10,
- .lower_margin = 11,
- .refresh = 60,
- },
- },
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
- VIDCON0_CLKSEL_LCD,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
- .default_win = 3,
- .bpp = 32,
-};
-
-#else
-/* Frame Buffer */
-static struct s3c_fb_pd_win nuri_fb_win0 = {
- .max_bpp = 24,
- .default_bpp = 16,
- .xres = 1024,
- .yres = 600,
- .virtual_x = 1024,
- .virtual_y = 2 * 600,
-};
-
-static struct fb_videomode nuri_lcd_timing = {
- .left_margin = 64,
- .right_margin = 16,
- .upper_margin = 64,
- .lower_margin = 1,
- .hsync_len = 48,
- .vsync_len = 3,
- .xres = 1024,
- .yres = 600,
- .refresh = 60,
-};
-
-static struct s3c_fb_platdata nuri_fb_pdata __initdata = {
- .win[0] = &nuri_fb_win0,
- .vtiming = &nuri_lcd_timing,
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
- VIDCON0_CLKSEL_LCD,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
- .setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
-};
-#endif
-
-static void nuri_lcd_power_on(struct plat_lcd_data *pd, unsigned int power)
-{
- int gpio = EXYNOS4_GPE1(5);
-
- gpio_request(gpio, "LVDS_nSHDN");
- gpio_direction_output(gpio, power);
- gpio_free(gpio);
-}
-
-static int nuri_bl_init(struct device *dev)
-{
- return gpio_request_one(EXYNOS4_GPE2(3), GPIOF_OUT_INIT_LOW,
- "LCD_LD0_EN");
-}
-
-static int nuri_bl_notify(struct device *dev, int brightness)
-{
- if (brightness < 1)
- brightness = 0;
-
- gpio_set_value(EXYNOS4_GPE2(3), 1);
-
- return brightness;
-}
-
-static void nuri_bl_exit(struct device *dev)
-{
- gpio_free(EXYNOS4_GPE2(3));
-}
-
-/* nuri pwm backlight */
-static struct platform_pwm_backlight_data nuri_backlight_data = {
- .pwm_id = 0,
- .pwm_period_ns = 30000,
- .max_brightness = 100,
- .dft_brightness = 50,
- .init = nuri_bl_init,
- .notify = nuri_bl_notify,
- .exit = nuri_bl_exit,
-};
-
-static struct platform_device nuri_backlight_device = {
- .name = "pwm-backlight",
- .id = -1,
- .dev = {
- .parent = &s3c_device_timer[0].dev,
- .platform_data = &nuri_backlight_data,
- },
-};
-
-static struct plat_lcd_data nuri_lcd_platform_data = {
- .set_power = nuri_lcd_power_on,
-};
-
-static struct platform_device nuri_lcd_device = {
- .name = "platform-lcd",
- .id = -1,
- .dev = {
- .platform_data = &nuri_lcd_platform_data,
- },
-};
-
-/* I2C1 */
-static struct i2c_board_info i2c1_devs[] __initdata = {
- /* Gyro, To be updated */
-};
-
-/* TSP */
-static struct mxt_platform_data mxt_platform_data = {
- .x_line = 18,
- .y_line = 11,
- .x_size = 1024,
- .y_size = 600,
- .blen = 0x1,
- .threshold = 0x28,
- .voltage = 2800000, /* 2.8V */
- .orient = MXT_DIAGONAL_COUNTER,
- .irqflags = IRQF_TRIGGER_FALLING,
-};
-
-static struct s3c2410_platform_i2c i2c3_data __initdata = {
- .flags = 0,
- .bus_num = 3,
- .slave_addr = 0x10,
- .frequency = 400 * 1000,
- .sda_delay = 100,
-};
-
-static struct i2c_board_info i2c3_devs[] __initdata = {
- {
- I2C_BOARD_INFO("atmel_mxt_ts", 0x4a),
- .platform_data = &mxt_platform_data,
- .irq = IRQ_EINT(4),
- },
-};
-
-static void __init nuri_tsp_init(void)
-{
- int gpio;
-
- /* TOUCH_INT: XEINT_4 */
- gpio = EXYNOS4_GPX0(4);
- gpio_request(gpio, "TOUCH_INT");
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
-}
-
-static struct regulator_consumer_supply __initdata max8997_ldo1_[] = {
- REGULATOR_SUPPLY("vdd", "s5p-adc"), /* Used by CPU's ADC drv */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo3_[] = {
- REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"), /* USB */
- REGULATOR_SUPPLY("vddcore", "s5p-mipi-csis.0"), /* MIPI */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo4_[] = {
- REGULATOR_SUPPLY("vddio", "s5p-mipi-csis.0"), /* MIPI */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo5_[] = {
- REGULATOR_SUPPLY("vhsic", "modemctl"), /* MODEM */
-};
-static struct regulator_consumer_supply nuri_max8997_ldo6_consumer[] = {
- REGULATOR_SUPPLY("vdd_reg", "6-003c"), /* S5K6AA camera */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo7_[] = {
- REGULATOR_SUPPLY("dig_18", "0-001f"), /* HCD803 */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo8_[] = {
- REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"), /* USB */
- REGULATOR_SUPPLY("vdac", NULL), /* Used by CPU */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo11_[] = {
- REGULATOR_SUPPLY("vcc", "platform-lcd"), /* U804 LVDS */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo12_[] = {
- REGULATOR_SUPPLY("vddio", "6-003c"), /* HDC802 */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo13_[] = {
- REGULATOR_SUPPLY("vmmc", "exynos4-sdhci.2"), /* TFLASH */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo14_[] = {
- REGULATOR_SUPPLY("inmotor", "max8997-haptic"),
-};
-static struct regulator_consumer_supply __initdata max8997_ldo15_[] = {
- REGULATOR_SUPPLY("avdd", "3-004a"), /* Touch Screen */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo16_[] = {
- REGULATOR_SUPPLY("d_sensor", "0-001f"), /* HDC803 */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo18_[] = {
- REGULATOR_SUPPLY("vdd", "3-004a"), /* Touch Screen */
-};
-static struct regulator_consumer_supply __initdata max8997_buck1_[] = {
- REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */
-};
-static struct regulator_consumer_supply __initdata max8997_buck2_[] = {
- REGULATOR_SUPPLY("vdd_int", "exynos4210-busfreq.0"), /* CPUFREQ */
-};
-static struct regulator_consumer_supply __initdata max8997_buck3_[] = {
- REGULATOR_SUPPLY("vdd", "mali_dev.0"), /* G3D of Exynos 4 */
-};
-static struct regulator_consumer_supply __initdata max8997_buck4_[] = {
- REGULATOR_SUPPLY("core", "0-001f"), /* HDC803 */
-};
-static struct regulator_consumer_supply __initdata max8997_buck6_[] = {
- REGULATOR_SUPPLY("dig_28", "0-001f"), /* pin "7" of HDC803 */
-};
-static struct regulator_consumer_supply __initdata max8997_esafeout1_[] = {
- REGULATOR_SUPPLY("usb_vbus", NULL), /* CPU's USB OTG */
-};
-static struct regulator_consumer_supply __initdata max8997_esafeout2_[] = {
- REGULATOR_SUPPLY("usb_vbus", "modemctl"), /* VBUS of Modem */
-};
-
-static struct regulator_consumer_supply __initdata max8997_charger_[] = {
- REGULATOR_SUPPLY("vinchg1", "charger-manager.0"),
-};
-static struct regulator_consumer_supply __initdata max8997_chg_toff_[] = {
- REGULATOR_SUPPLY("vinchg_stop", NULL), /* for jack interrupt handlers */
-};
-
-static struct regulator_consumer_supply __initdata max8997_32khz_ap_[] = {
- REGULATOR_SUPPLY("gps_clk", "bcm4751"),
- REGULATOR_SUPPLY("bt_clk", "bcm4330-b1"),
- REGULATOR_SUPPLY("wifi_clk", "bcm433-b1"),
-};
-
-static struct regulator_init_data __initdata max8997_ldo1_data = {
- .constraints = {
- .name = "VADC_3.3V_C210",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_ldo1_),
- .consumer_supplies = max8997_ldo1_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo2_data = {
- .constraints = {
- .name = "VALIVE_1.1V_C210",
- .min_uV = 1100000,
- .max_uV = 1100000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .enabled = 1,
- },
- },
-};
-
-static struct regulator_init_data __initdata max8997_ldo3_data = {
- .constraints = {
- .name = "VUSB_1.1V_C210",
- .min_uV = 1100000,
- .max_uV = 1100000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_ldo3_),
- .consumer_supplies = max8997_ldo3_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo4_data = {
- .constraints = {
- .name = "VMIPI_1.8V",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_ldo4_),
- .consumer_supplies = max8997_ldo4_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo5_data = {
- .constraints = {
- .name = "VHSIC_1.2V_C210",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_ldo5_),
- .consumer_supplies = max8997_ldo5_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo6_data = {
- .constraints = {
- .name = "VCC_1.8V_PDA",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .enabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(nuri_max8997_ldo6_consumer),
- .consumer_supplies = nuri_max8997_ldo6_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_ldo7_data = {
- .constraints = {
- .name = "CAM_ISP_1.8V",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_ldo7_),
- .consumer_supplies = max8997_ldo7_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo8_data = {
- .constraints = {
- .name = "VUSB+VDAC_3.3V_C210",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_ldo8_),
- .consumer_supplies = max8997_ldo8_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo9_data = {
- .constraints = {
- .name = "VCC_2.8V_PDA",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .enabled = 1,
- },
- },
-};
-
-static struct regulator_init_data __initdata max8997_ldo10_data = {
- .constraints = {
- .name = "VPLL_1.1V_C210",
- .min_uV = 1100000,
- .max_uV = 1100000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data __initdata max8997_ldo11_data = {
- .constraints = {
- .name = "LVDS_VDD3.3V",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- .boot_on = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_ldo11_),
- .consumer_supplies = max8997_ldo11_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo12_data = {
- .constraints = {
- .name = "VT_CAM_1.8V",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_ldo12_),
- .consumer_supplies = max8997_ldo12_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo13_data = {
- .constraints = {
- .name = "VTF_2.8V",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_ldo13_),
- .consumer_supplies = max8997_ldo13_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo14_data = {
- .constraints = {
- .name = "VCC_3.0V_MOTOR",
- .min_uV = 3000000,
- .max_uV = 3000000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_ldo14_),
- .consumer_supplies = max8997_ldo14_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo15_data = {
- .constraints = {
- .name = "VTOUCH_ADVV2.8V",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_ldo15_),
- .consumer_supplies = max8997_ldo15_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo16_data = {
- .constraints = {
- .name = "CAM_SENSOR_IO_1.8V",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_ldo16_),
- .consumer_supplies = max8997_ldo16_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo18_data = {
- .constraints = {
- .name = "VTOUCH_VDD2.8V",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_ldo18_),
- .consumer_supplies = max8997_ldo18_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo21_data = {
- .constraints = {
- .name = "VDDQ_M1M2_1.2V",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data __initdata max8997_buck1_data = {
- .constraints = {
- .name = "VARM_1.2V_C210",
- .min_uV = 900000,
- .max_uV = 1350000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .always_on = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_buck1_),
- .consumer_supplies = max8997_buck1_,
-};
-
-static struct regulator_init_data __initdata max8997_buck2_data = {
- .constraints = {
- .name = "VINT_1.1V_C210",
- .min_uV = 900000,
- .max_uV = 1200000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .always_on = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_buck2_),
- .consumer_supplies = max8997_buck2_,
-};
-
-static struct regulator_init_data __initdata max8997_buck3_data = {
- .constraints = {
- .name = "VG3D_1.1V_C210",
- .min_uV = 900000,
- .max_uV = 1100000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_buck3_),
- .consumer_supplies = max8997_buck3_,
-};
-
-static struct regulator_init_data __initdata max8997_buck4_data = {
- .constraints = {
- .name = "CAM_ISP_CORE_1.2V",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_buck4_),
- .consumer_supplies = max8997_buck4_,
-};
-
-static struct regulator_init_data __initdata max8997_buck5_data = {
- .constraints = {
- .name = "VMEM_1.2V_C210",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .enabled = 1,
- },
- },
-};
-
-static struct regulator_init_data __initdata max8997_buck6_data = {
- .constraints = {
- .name = "CAM_AF_2.8V",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_buck6_),
- .consumer_supplies = max8997_buck6_,
-};
-
-static struct regulator_init_data __initdata max8997_buck7_data = {
- .constraints = {
- .name = "VCC_SUB_2.0V",
- .min_uV = 2000000,
- .max_uV = 2000000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .enabled = 1,
- },
- },
-};
-
-static struct regulator_init_data __initdata max8997_32khz_ap_data = {
- .constraints = {
- .name = "32KHz AP",
- .always_on = 1,
- .state_mem = {
- .enabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_32khz_ap_),
- .consumer_supplies = max8997_32khz_ap_,
-};
-
-static struct regulator_init_data __initdata max8997_32khz_cp_data = {
- .constraints = {
- .name = "32KHz CP",
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data __initdata max8997_vichg_data = {
- .constraints = {
- .name = "VICHG",
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data __initdata max8997_esafeout1_data = {
- .constraints = {
- .name = "SAFEOUT1",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .always_on = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_esafeout1_),
- .consumer_supplies = max8997_esafeout1_,
-};
-
-static struct regulator_init_data __initdata max8997_esafeout2_data = {
- .constraints = {
- .name = "SAFEOUT2",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_esafeout2_),
- .consumer_supplies = max8997_esafeout2_,
-};
-
-static struct regulator_init_data __initdata max8997_charger_cv_data = {
- .constraints = {
- .name = "CHARGER_CV",
- .min_uV = 4200000,
- .max_uV = 4200000,
- .apply_uV = 1,
- },
-};
-
-static struct regulator_init_data __initdata max8997_charger_data = {
- .constraints = {
- .name = "CHARGER",
- .min_uA = 200000,
- .max_uA = 950000,
- .boot_on = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS |
- REGULATOR_CHANGE_CURRENT,
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_charger_),
- .consumer_supplies = max8997_charger_,
-};
-
-static struct regulator_init_data __initdata max8997_charger_topoff_data = {
- .constraints = {
- .name = "CHARGER TOPOFF",
- .min_uA = 50000,
- .max_uA = 200000,
- .valid_ops_mask = REGULATOR_CHANGE_CURRENT,
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_chg_toff_),
- .consumer_supplies = max8997_chg_toff_,
-};
-
-static struct max8997_regulator_data __initdata nuri_max8997_regulators[] = {
- { MAX8997_LDO1, &max8997_ldo1_data },
- { MAX8997_LDO2, &max8997_ldo2_data },
- { MAX8997_LDO3, &max8997_ldo3_data },
- { MAX8997_LDO4, &max8997_ldo4_data },
- { MAX8997_LDO5, &max8997_ldo5_data },
- { MAX8997_LDO6, &max8997_ldo6_data },
- { MAX8997_LDO7, &max8997_ldo7_data },
- { MAX8997_LDO8, &max8997_ldo8_data },
- { MAX8997_LDO9, &max8997_ldo9_data },
- { MAX8997_LDO10, &max8997_ldo10_data },
- { MAX8997_LDO11, &max8997_ldo11_data },
- { MAX8997_LDO12, &max8997_ldo12_data },
- { MAX8997_LDO13, &max8997_ldo13_data },
- { MAX8997_LDO14, &max8997_ldo14_data },
- { MAX8997_LDO15, &max8997_ldo15_data },
- { MAX8997_LDO16, &max8997_ldo16_data },
-
- { MAX8997_LDO18, &max8997_ldo18_data },
- { MAX8997_LDO21, &max8997_ldo21_data },
-
- { MAX8997_BUCK1, &max8997_buck1_data },
- { MAX8997_BUCK2, &max8997_buck2_data },
- { MAX8997_BUCK3, &max8997_buck3_data },
- { MAX8997_BUCK4, &max8997_buck4_data },
- { MAX8997_BUCK5, &max8997_buck5_data },
- { MAX8997_BUCK6, &max8997_buck6_data },
- { MAX8997_BUCK7, &max8997_buck7_data },
-
- { MAX8997_EN32KHZ_AP, &max8997_32khz_ap_data },
- { MAX8997_EN32KHZ_CP, &max8997_32khz_cp_data },
-
- { MAX8997_ENVICHG, &max8997_vichg_data },
- { MAX8997_ESAFEOUT1, &max8997_esafeout1_data },
- { MAX8997_ESAFEOUT2, &max8997_esafeout2_data },
- { MAX8997_CHARGER_CV, &max8997_charger_cv_data },
- { MAX8997_CHARGER, &max8997_charger_data },
- { MAX8997_CHARGER_TOPOFF, &max8997_charger_topoff_data },
-};
-
-static struct max8997_platform_data __initdata nuri_max8997_pdata = {
- .wakeup = 1,
-
- .num_regulators = ARRAY_SIZE(nuri_max8997_regulators),
- .regulators = nuri_max8997_regulators,
-
- .buck125_gpios = { EXYNOS4_GPX0(5), EXYNOS4_GPX0(6), EXYNOS4_GPL0(0) },
-
- .buck1_voltage[0] = 1350000, /* 1.35V */
- .buck1_voltage[1] = 1300000, /* 1.3V */
- .buck1_voltage[2] = 1250000, /* 1.25V */
- .buck1_voltage[3] = 1200000, /* 1.2V */
- .buck1_voltage[4] = 1150000, /* 1.15V */
- .buck1_voltage[5] = 1100000, /* 1.1V */
- .buck1_voltage[6] = 1000000, /* 1.0V */
- .buck1_voltage[7] = 950000, /* 0.95V */
-
- .buck2_voltage[0] = 1100000, /* 1.1V */
- .buck2_voltage[1] = 1000000, /* 1.0V */
- .buck2_voltage[2] = 950000, /* 0.95V */
- .buck2_voltage[3] = 900000, /* 0.9V */
- .buck2_voltage[4] = 1100000, /* 1.1V */
- .buck2_voltage[5] = 1000000, /* 1.0V */
- .buck2_voltage[6] = 950000, /* 0.95V */
- .buck2_voltage[7] = 900000, /* 0.9V */
-
- .buck5_voltage[0] = 1200000, /* 1.2V */
- .buck5_voltage[1] = 1200000, /* 1.2V */
- .buck5_voltage[2] = 1200000, /* 1.2V */
- .buck5_voltage[3] = 1200000, /* 1.2V */
- .buck5_voltage[4] = 1200000, /* 1.2V */
- .buck5_voltage[5] = 1200000, /* 1.2V */
- .buck5_voltage[6] = 1200000, /* 1.2V */
- .buck5_voltage[7] = 1200000, /* 1.2V */
-};
-
-/* GPIO I2C 5 (PMIC) */
-enum { I2C5_MAX8997 };
-static struct i2c_board_info i2c5_devs[] __initdata = {
- [I2C5_MAX8997] = {
- I2C_BOARD_INFO("max8997", 0xCC >> 1),
- .platform_data = &nuri_max8997_pdata,
- },
-};
-
-static struct max17042_platform_data nuri_battery_platform_data = {
-};
-
-/* GPIO I2C 9 (Fuel Gauge) */
-static struct i2c_gpio_platform_data i2c9_gpio_data = {
- .sda_pin = EXYNOS4_GPY4(0), /* XM0ADDR_8 */
- .scl_pin = EXYNOS4_GPY4(1), /* XM0ADDR_9 */
-};
-static struct platform_device i2c9_gpio = {
- .name = "i2c-gpio",
- .id = 9,
- .dev = {
- .platform_data = &i2c9_gpio_data,
- },
-};
-enum { I2C9_MAX17042};
-static struct i2c_board_info i2c9_devs[] __initdata = {
- [I2C9_MAX17042] = {
- I2C_BOARD_INFO("max17042", 0x36),
- .platform_data = &nuri_battery_platform_data,
- },
-};
-
-/* MAX8903 Secondary Charger */
-static struct regulator_consumer_supply supplies_max8903[] = {
- REGULATOR_SUPPLY("vinchg2", "charger-manager.0"),
-};
-
-static struct regulator_init_data max8903_charger_en_data = {
- .constraints = {
- .name = "VOUT_CHARGER",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(supplies_max8903),
- .consumer_supplies = supplies_max8903,
-};
-
-static struct fixed_voltage_config max8903_charger_en = {
- .supply_name = "VOUT_CHARGER",
- .microvolts = 5000000, /* Assume 5VDC */
- .gpio = EXYNOS4_GPY4(5), /* TA_EN negaged */
- .enable_high = 0, /* Enable = Low */
- .enabled_at_boot = 1,
- .init_data = &max8903_charger_en_data,
-};
-
-static struct platform_device max8903_fixed_reg_dev = {
- .name = "reg-fixed-voltage",
- .id = FIXED_REG_ID_MAX8903,
- .dev = { .platform_data = &max8903_charger_en },
-};
-
-static struct max8903_pdata nuri_max8903 = {
- /*
- * cen: don't control with the driver, let it be
- * controlled by regulator above
- */
- .dok = EXYNOS4_GPX1(4), /* TA_nCONNECTED */
- /* uok, usus: not connected */
- .chg = EXYNOS4_GPE2(0), /* TA_nCHG */
- /* flt: vcc_1.8V_pda */
- .dcm = EXYNOS4_GPL0(1), /* CURR_ADJ */
-
- .dc_valid = true,
- .usb_valid = false, /* USB is not wired to MAX8903 */
-};
-
-static struct platform_device nuri_max8903_device = {
- .name = "max8903-charger",
- .dev = {
- .platform_data = &nuri_max8903,
- },
-};
-
-static void __init nuri_power_init(void)
-{
- int gpio;
- int ta_en = 0;
-
- gpio = EXYNOS4_GPX0(7);
- gpio_request(gpio, "AP_PMIC_IRQ");
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-
- gpio = EXYNOS4_GPX2(3);
- gpio_request(gpio, "FUEL_ALERT");
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-
- gpio = nuri_max8903.dok;
- gpio_request(gpio, "TA_nCONNECTED");
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- ta_en = gpio_get_value(gpio) ? 0 : 1;
-
- gpio = nuri_max8903.chg;
- gpio_request(gpio, "TA_nCHG");
- gpio_direction_input(gpio);
-
- gpio = nuri_max8903.dcm;
- gpio_request(gpio, "CURR_ADJ");
- gpio_direction_output(gpio, ta_en);
-}
-
-/* USB EHCI */
-static struct s5p_ehci_platdata nuri_ehci_pdata;
-
-static void __init nuri_ehci_init(void)
-{
- struct s5p_ehci_platdata *pdata = &nuri_ehci_pdata;
-
- s5p_ehci_set_platdata(pdata);
-}
-
-/* USB OTG */
-static struct s3c_hsotg_plat nuri_hsotg_pdata;
-
-/* CAMERA */
-static struct regulator_consumer_supply cam_vt_cam15_supply =
- REGULATOR_SUPPLY("vdd_core", "6-003c");
-
-static struct regulator_init_data cam_vt_cam15_reg_init_data = {
- .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
- .num_consumer_supplies = 1,
- .consumer_supplies = &cam_vt_cam15_supply,
-};
-
-static struct fixed_voltage_config cam_vt_cam15_fixed_voltage_cfg = {
- .supply_name = "VT_CAM_1.5V",
- .microvolts = 1500000,
- .gpio = EXYNOS4_GPE2(2), /* VT_CAM_1.5V_EN */
- .enable_high = 1,
- .init_data = &cam_vt_cam15_reg_init_data,
-};
-
-static struct platform_device cam_vt_cam15_fixed_rdev = {
- .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_VT_15V,
- .dev = { .platform_data = &cam_vt_cam15_fixed_voltage_cfg },
-};
-
-static struct regulator_consumer_supply cam_vdda_supply[] = {
- REGULATOR_SUPPLY("vdda", "6-003c"),
- REGULATOR_SUPPLY("a_sensor", "0-001f"),
-};
-
-static struct regulator_init_data cam_vdda_reg_init_data = {
- .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
- .num_consumer_supplies = ARRAY_SIZE(cam_vdda_supply),
- .consumer_supplies = cam_vdda_supply,
-};
-
-static struct fixed_voltage_config cam_vdda_fixed_voltage_cfg = {
- .supply_name = "CAM_IO_EN",
- .microvolts = 2800000,
- .gpio = EXYNOS4_GPE2(1), /* CAM_IO_EN */
- .enable_high = 1,
- .init_data = &cam_vdda_reg_init_data,
-};
-
-static struct platform_device cam_vdda_fixed_rdev = {
- .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_A28V,
- .dev = { .platform_data = &cam_vdda_fixed_voltage_cfg },
-};
-
-static struct regulator_consumer_supply camera_8m_12v_supply =
- REGULATOR_SUPPLY("dig_12", "0-001f");
-
-static struct regulator_init_data cam_8m_12v_reg_init_data = {
- .num_consumer_supplies = 1,
- .consumer_supplies = &camera_8m_12v_supply,
- .constraints = {
- .valid_ops_mask = REGULATOR_CHANGE_STATUS
- },
-};
-
-static struct fixed_voltage_config cam_8m_12v_fixed_voltage_cfg = {
- .supply_name = "8M_1.2V",
- .microvolts = 1200000,
- .gpio = EXYNOS4_GPE2(5), /* 8M_1.2V_EN */
- .enable_high = 1,
- .init_data = &cam_8m_12v_reg_init_data,
-};
-
-static struct platform_device cam_8m_12v_fixed_rdev = {
- .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_12V,
- .dev = { .platform_data = &cam_8m_12v_fixed_voltage_cfg },
-};
-
-static struct s5p_platform_mipi_csis mipi_csis_platdata = {
- .clk_rate = 166000000UL,
- .lanes = 2,
- .hs_settle = 12,
-};
-
-#define GPIO_CAM_MEGA_RST EXYNOS4_GPY3(7) /* ISP_RESET */
-#define GPIO_CAM_8M_ISP_INT EXYNOS4_GPL2(5)
-#define GPIO_CAM_VT_NSTBY EXYNOS4_GPL2(0)
-#define GPIO_CAM_VT_NRST EXYNOS4_GPL2(1)
-
-static struct s5k6aa_platform_data s5k6aa_pldata = {
- .mclk_frequency = 24000000UL,
- .gpio_reset = { GPIO_CAM_VT_NRST, 0 },
- .gpio_stby = { GPIO_CAM_VT_NSTBY, 0 },
- .bus_type = V4L2_MBUS_PARALLEL,
- .horiz_flip = 1,
-};
-
-static struct i2c_board_info s5k6aa_board_info = {
- I2C_BOARD_INFO("S5K6AA", 0x3c),
- .platform_data = &s5k6aa_pldata,
-};
-
-static struct m5mols_platform_data m5mols_platdata = {
- .gpio_reset = GPIO_CAM_MEGA_RST,
-};
-
-static struct i2c_board_info m5mols_board_info = {
- I2C_BOARD_INFO("M5MOLS", 0x1F),
- .platform_data = &m5mols_platdata,
-};
-
-static struct fimc_source_info nuri_camera_sensors[] = {
- {
- .flags = V4L2_MBUS_PCLK_SAMPLE_RISING |
- V4L2_MBUS_VSYNC_ACTIVE_LOW,
- .fimc_bus_type = FIMC_BUS_TYPE_ITU_601,
- .board_info = &s5k6aa_board_info,
- .clk_frequency = 24000000UL,
- .i2c_bus_num = 6,
- }, {
- .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
- V4L2_MBUS_VSYNC_ACTIVE_LOW,
- .fimc_bus_type = FIMC_BUS_TYPE_MIPI_CSI2,
- .board_info = &m5mols_board_info,
- .clk_frequency = 24000000UL,
- },
-};
-
-static struct s5p_platform_fimc fimc_md_platdata = {
- .source_info = nuri_camera_sensors,
- .num_clients = ARRAY_SIZE(nuri_camera_sensors),
-};
-
-static struct gpio nuri_camera_gpios[] = {
- { GPIO_CAM_VT_NSTBY, GPIOF_OUT_INIT_LOW, "CAM_VGA_NSTBY" },
- { GPIO_CAM_VT_NRST, GPIOF_OUT_INIT_LOW, "CAM_VGA_NRST" },
- { GPIO_CAM_8M_ISP_INT, GPIOF_IN, "8M_ISP_INT" },
- { GPIO_CAM_MEGA_RST, GPIOF_OUT_INIT_LOW, "CAM_8M_NRST" },
-};
-
-static void __init nuri_camera_init(void)
-{
- s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata),
- &s5p_device_mipi_csis0);
- s3c_set_platdata(&fimc_md_platdata, sizeof(fimc_md_platdata),
- &s5p_device_fimc_md);
-
- if (gpio_request_array(nuri_camera_gpios,
- ARRAY_SIZE(nuri_camera_gpios))) {
- pr_err("%s: GPIO request failed\n", __func__);
- return;
- }
-
- m5mols_board_info.irq = s5p_register_gpio_interrupt(GPIO_CAM_8M_ISP_INT);
- if (m5mols_board_info.irq >= 0)
- s3c_gpio_cfgpin(GPIO_CAM_8M_ISP_INT, S3C_GPIO_SFN(0xF));
- else
- pr_err("%s: Failed to configure 8M_ISP_INT GPIO\n", __func__);
-
- /* Free GPIOs controlled directly by the sensor drivers. */
- gpio_free(GPIO_CAM_VT_NRST);
- gpio_free(GPIO_CAM_VT_NSTBY);
- gpio_free(GPIO_CAM_MEGA_RST);
-
- if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A)) {
- pr_err("%s: Camera port A setup failed\n", __func__);
- return;
- }
- /* Increase drive strength of the sensor clock output */
- s5p_gpio_set_drvstr(EXYNOS4_GPJ1(3), S5P_GPIO_DRVSTR_LV4);
-}
-
-static struct s3c2410_platform_i2c nuri_i2c6_platdata __initdata = {
- .frequency = 400000U,
- .sda_delay = 200,
- .bus_num = 6,
-};
-
-static struct s3c2410_platform_i2c nuri_i2c0_platdata __initdata = {
- .frequency = 400000U,
- .sda_delay = 200,
-};
-
-/* DEVFREQ controlling memory/bus */
-static struct platform_device exynos4_bus_devfreq = {
- .name = "exynos4210-busfreq",
-};
-
-static struct platform_device *nuri_devices[] __initdata = {
- /* Samsung Platform Devices */
- &s3c_device_i2c5, /* PMIC should initialize first */
- &s3c_device_i2c0,
- &s3c_device_i2c6,
- &emmc_fixed_voltage,
- &s5p_device_mipi_csis0,
- &s5p_device_fimc0,
- &s5p_device_fimc1,
- &s5p_device_fimc2,
- &s5p_device_fimc3,
- &s5p_device_fimd0,
- &s3c_device_hsmmc0,
- &s3c_device_hsmmc2,
- &s3c_device_hsmmc3,
- &s3c_device_wdt,
- &s3c_device_timer[0],
- &s5p_device_ehci,
- &s3c_device_i2c3,
- &i2c9_gpio,
- &s3c_device_adc,
- &s5p_device_g2d,
- &s5p_device_jpeg,
- &s3c_device_rtc,
- &s5p_device_mfc,
- &s5p_device_mfc_l,
- &s5p_device_mfc_r,
- &s5p_device_fimc_md,
- &s3c_device_usb_hsotg,
-
- /* NURI Devices */
- &nuri_gpio_keys,
- &nuri_lcd_device,
- &nuri_backlight_device,
- &max8903_fixed_reg_dev,
- &nuri_max8903_device,
- &cam_vt_cam15_fixed_rdev,
- &cam_vdda_fixed_rdev,
- &cam_8m_12v_fixed_rdev,
- &exynos4_bus_devfreq,
-};
-
-static void __init nuri_map_io(void)
-{
- exynos_init_io(NULL, 0);
- s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs));
- xxti_f = 0;
- xusbxti_f = 24000000;
-}
-
-static void __init nuri_reserve(void)
-{
- s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
-}
-
-static void __init nuri_machine_init(void)
-{
- nuri_sdhci_init();
- nuri_tsp_init();
- nuri_power_init();
-
- s3c_i2c0_set_platdata(&nuri_i2c0_platdata);
- i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
- s3c_i2c3_set_platdata(&i2c3_data);
- i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
- s3c_i2c5_set_platdata(NULL);
- i2c5_devs[I2C5_MAX8997].irq = gpio_to_irq(EXYNOS4_GPX0(7));
- i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
- i2c9_devs[I2C9_MAX17042].irq = gpio_to_irq(EXYNOS4_GPX2(3));
- i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs));
- s3c_i2c6_set_platdata(&nuri_i2c6_platdata);
-
-#ifdef CONFIG_DRM_EXYNOS
- s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
- exynos4_fimd0_gpio_setup_24bpp();
-#else
- s5p_fimd0_set_platdata(&nuri_fb_pdata);
-#endif
-
- nuri_camera_init();
-
- nuri_ehci_init();
- s3c_hsotg_set_platdata(&nuri_hsotg_pdata);
-
- /* Last */
- platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices));
-}
-
-MACHINE_START(NURI, "NURI")
- /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
- .atag_offset = 0x100,
- .smp = smp_ops(exynos_smp_ops),
- .init_irq = exynos4_init_irq,
- .map_io = nuri_map_io,
- .init_machine = nuri_machine_init,
- .init_late = exynos_init_late,
- .init_time = exynos_init_time,
- .reserve = &nuri_reserve,
- .restart = exynos4_restart,
-MACHINE_END
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/mach-origen.c
- *
- * Copyright (c) 2011 Insignal Co., Ltd.
- * http://www.insignal.co.kr/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/serial_core.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/input.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio_keys.h>
-#include <linux/i2c.h>
-#include <linux/regulator/machine.h>
-#include <linux/mfd/max8997.h>
-#include <linux/lcd.h>
-#include <linux/rfkill-gpio.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/s3c-hsotg.h>
-#include <linux/platform_data/usb-ehci-s5p.h>
-#include <linux/platform_data/usb-ohci-exynos.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <video/platform_lcd.h>
-#include <video/samsung_fimd.h>
-
-#include <plat/regs-serial.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/sdhci.h>
-#include <plat/clock.h>
-#include <plat/gpio-cfg.h>
-#include <plat/backlight.h>
-#include <plat/fb.h>
-#include <plat/mfc.h>
-#include <plat/hdmi.h>
-
-#include <mach/map.h>
-#include <mach/irqs.h>
-
-#include <drm/exynos_drm.h>
-#include "common.h"
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define ORIGEN_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
- S3C2410_UCON_RXILEVEL | \
- S3C2410_UCON_TXIRQMODE | \
- S3C2410_UCON_RXIRQMODE | \
- S3C2410_UCON_RXFIFO_TOI | \
- S3C2443_UCON_RXERR_IRQEN)
-
-#define ORIGEN_ULCON_DEFAULT S3C2410_LCON_CS8
-
-#define ORIGEN_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
- S5PV210_UFCON_TXTRIG4 | \
- S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = ORIGEN_UCON_DEFAULT,
- .ulcon = ORIGEN_ULCON_DEFAULT,
- .ufcon = ORIGEN_UFCON_DEFAULT,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = ORIGEN_UCON_DEFAULT,
- .ulcon = ORIGEN_ULCON_DEFAULT,
- .ufcon = ORIGEN_UFCON_DEFAULT,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = ORIGEN_UCON_DEFAULT,
- .ulcon = ORIGEN_ULCON_DEFAULT,
- .ufcon = ORIGEN_UFCON_DEFAULT,
- },
- [3] = {
- .hwport = 3,
- .flags = 0,
- .ucon = ORIGEN_UCON_DEFAULT,
- .ulcon = ORIGEN_ULCON_DEFAULT,
- .ufcon = ORIGEN_UFCON_DEFAULT,
- },
-};
-
-static struct regulator_consumer_supply __initdata ldo3_consumer[] = {
- REGULATOR_SUPPLY("vddcore", "s5p-mipi-csis.0"), /* MIPI */
- REGULATOR_SUPPLY("vdd", "exynos4-hdmi"), /* HDMI */
- REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"), /* HDMI */
- REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"), /* OTG */
-};
-static struct regulator_consumer_supply __initdata ldo6_consumer[] = {
- REGULATOR_SUPPLY("vddio", "s5p-mipi-csis.0"), /* MIPI */
-};
-static struct regulator_consumer_supply __initdata ldo7_consumer[] = {
- REGULATOR_SUPPLY("avdd", "alc5625"), /* Realtek ALC5625 */
-};
-static struct regulator_consumer_supply __initdata ldo8_consumer[] = {
- REGULATOR_SUPPLY("vdd", "s5p-adc"), /* ADC */
- REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"), /* HDMI */
- REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"), /* OTG */
-};
-static struct regulator_consumer_supply __initdata ldo9_consumer[] = {
- REGULATOR_SUPPLY("dvdd", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
-};
-static struct regulator_consumer_supply __initdata ldo11_consumer[] = {
- REGULATOR_SUPPLY("dvdd", "alc5625"), /* Realtek ALC5625 */
-};
-static struct regulator_consumer_supply __initdata ldo14_consumer[] = {
- REGULATOR_SUPPLY("avdd18", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
-};
-static struct regulator_consumer_supply __initdata ldo17_consumer[] = {
- REGULATOR_SUPPLY("vdd33", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
-};
-static struct regulator_consumer_supply __initdata buck1_consumer[] = {
- REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */
-};
-static struct regulator_consumer_supply __initdata buck2_consumer[] = {
- REGULATOR_SUPPLY("vdd_int", NULL), /* CPUFREQ */
-};
-static struct regulator_consumer_supply __initdata buck3_consumer[] = {
- REGULATOR_SUPPLY("vdd_g3d", "mali_drm"), /* G3D */
-};
-static struct regulator_consumer_supply __initdata buck7_consumer[] = {
- REGULATOR_SUPPLY("vcc", "platform-lcd"), /* LCD */
-};
-
-static struct regulator_init_data __initdata max8997_ldo1_data = {
- .constraints = {
- .name = "VDD_ABB_3.3V",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .apply_uV = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data __initdata max8997_ldo2_data = {
- .constraints = {
- .name = "VDD_ALIVE_1.1V",
- .min_uV = 1100000,
- .max_uV = 1100000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .enabled = 1,
- },
- },
-};
-
-static struct regulator_init_data __initdata max8997_ldo3_data = {
- .constraints = {
- .name = "VMIPI_1.1V",
- .min_uV = 1100000,
- .max_uV = 1100000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(ldo3_consumer),
- .consumer_supplies = ldo3_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_ldo4_data = {
- .constraints = {
- .name = "VDD_RTC_1.8V",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data __initdata max8997_ldo6_data = {
- .constraints = {
- .name = "VMIPI_1.8V",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(ldo6_consumer),
- .consumer_supplies = ldo6_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_ldo7_data = {
- .constraints = {
- .name = "VDD_AUD_1.8V",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(ldo7_consumer),
- .consumer_supplies = ldo7_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_ldo8_data = {
- .constraints = {
- .name = "VADC_3.3V",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(ldo8_consumer),
- .consumer_supplies = ldo8_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_ldo9_data = {
- .constraints = {
- .name = "DVDD_SWB_2.8V",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = 1,
- .always_on = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(ldo9_consumer),
- .consumer_supplies = ldo9_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_ldo10_data = {
- .constraints = {
- .name = "VDD_PLL_1.1V",
- .min_uV = 1100000,
- .max_uV = 1100000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data __initdata max8997_ldo11_data = {
- .constraints = {
- .name = "VDD_AUD_3V",
- .min_uV = 3000000,
- .max_uV = 3000000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(ldo11_consumer),
- .consumer_supplies = ldo11_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_ldo14_data = {
- .constraints = {
- .name = "AVDD18_SWB_1.8V",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = 1,
- .always_on = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(ldo14_consumer),
- .consumer_supplies = ldo14_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_ldo17_data = {
- .constraints = {
- .name = "VDD_SWB_3.3V",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .apply_uV = 1,
- .always_on = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(ldo17_consumer),
- .consumer_supplies = ldo17_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_ldo21_data = {
- .constraints = {
- .name = "VDD_MIF_1.2V",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data __initdata max8997_buck1_data = {
- .constraints = {
- .name = "VDD_ARM_1.2V",
- .min_uV = 950000,
- .max_uV = 1350000,
- .always_on = 1,
- .boot_on = 1,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(buck1_consumer),
- .consumer_supplies = buck1_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_buck2_data = {
- .constraints = {
- .name = "VDD_INT_1.1V",
- .min_uV = 900000,
- .max_uV = 1100000,
- .always_on = 1,
- .boot_on = 1,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(buck2_consumer),
- .consumer_supplies = buck2_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_buck3_data = {
- .constraints = {
- .name = "VDD_G3D_1.1V",
- .min_uV = 900000,
- .max_uV = 1100000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(buck3_consumer),
- .consumer_supplies = buck3_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_buck5_data = {
- .constraints = {
- .name = "VDDQ_M1M2_1.2V",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data __initdata max8997_buck7_data = {
- .constraints = {
- .name = "VDD_LCD_3.3V",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .boot_on = 1,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(buck7_consumer),
- .consumer_supplies = buck7_consumer,
-};
-
-static struct max8997_regulator_data __initdata origen_max8997_regulators[] = {
- { MAX8997_LDO1, &max8997_ldo1_data },
- { MAX8997_LDO2, &max8997_ldo2_data },
- { MAX8997_LDO3, &max8997_ldo3_data },
- { MAX8997_LDO4, &max8997_ldo4_data },
- { MAX8997_LDO6, &max8997_ldo6_data },
- { MAX8997_LDO7, &max8997_ldo7_data },
- { MAX8997_LDO8, &max8997_ldo8_data },
- { MAX8997_LDO9, &max8997_ldo9_data },
- { MAX8997_LDO10, &max8997_ldo10_data },
- { MAX8997_LDO11, &max8997_ldo11_data },
- { MAX8997_LDO14, &max8997_ldo14_data },
- { MAX8997_LDO17, &max8997_ldo17_data },
- { MAX8997_LDO21, &max8997_ldo21_data },
- { MAX8997_BUCK1, &max8997_buck1_data },
- { MAX8997_BUCK2, &max8997_buck2_data },
- { MAX8997_BUCK3, &max8997_buck3_data },
- { MAX8997_BUCK5, &max8997_buck5_data },
- { MAX8997_BUCK7, &max8997_buck7_data },
-};
-
-static struct max8997_platform_data __initdata origen_max8997_pdata = {
- .num_regulators = ARRAY_SIZE(origen_max8997_regulators),
- .regulators = origen_max8997_regulators,
-
- .wakeup = true,
- .buck1_gpiodvs = false,
- .buck2_gpiodvs = false,
- .buck5_gpiodvs = false,
-
- .ignore_gpiodvs_side_effect = true,
- .buck125_default_idx = 0x0,
-
- .buck125_gpios[0] = EXYNOS4_GPX0(0),
- .buck125_gpios[1] = EXYNOS4_GPX0(1),
- .buck125_gpios[2] = EXYNOS4_GPX0(2),
-
- .buck1_voltage[0] = 1350000,
- .buck1_voltage[1] = 1300000,
- .buck1_voltage[2] = 1250000,
- .buck1_voltage[3] = 1200000,
- .buck1_voltage[4] = 1150000,
- .buck1_voltage[5] = 1100000,
- .buck1_voltage[6] = 1000000,
- .buck1_voltage[7] = 950000,
-
- .buck2_voltage[0] = 1100000,
- .buck2_voltage[1] = 1100000,
- .buck2_voltage[2] = 1100000,
- .buck2_voltage[3] = 1100000,
- .buck2_voltage[4] = 1000000,
- .buck2_voltage[5] = 1000000,
- .buck2_voltage[6] = 1000000,
- .buck2_voltage[7] = 1000000,
-
- .buck5_voltage[0] = 1200000,
- .buck5_voltage[1] = 1200000,
- .buck5_voltage[2] = 1200000,
- .buck5_voltage[3] = 1200000,
- .buck5_voltage[4] = 1200000,
- .buck5_voltage[5] = 1200000,
- .buck5_voltage[6] = 1200000,
- .buck5_voltage[7] = 1200000,
-};
-
-/* I2C0 */
-static struct i2c_board_info i2c0_devs[] __initdata = {
- {
- I2C_BOARD_INFO("max8997", (0xCC >> 1)),
- .platform_data = &origen_max8997_pdata,
- .irq = IRQ_EINT(4),
- },
-};
-
-static struct s3c_sdhci_platdata origen_hsmmc0_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_INTERNAL,
-};
-
-static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_INTERNAL,
-};
-
-/* USB EHCI */
-static struct s5p_ehci_platdata origen_ehci_pdata;
-
-static void __init origen_ehci_init(void)
-{
- struct s5p_ehci_platdata *pdata = &origen_ehci_pdata;
-
- s5p_ehci_set_platdata(pdata);
-}
-
-/* USB OHCI */
-static struct exynos4_ohci_platdata origen_ohci_pdata;
-
-static void __init origen_ohci_init(void)
-{
- struct exynos4_ohci_platdata *pdata = &origen_ohci_pdata;
-
- exynos4_ohci_set_platdata(pdata);
-}
-
-/* USB OTG */
-static struct s3c_hsotg_plat origen_hsotg_pdata;
-
-static struct gpio_led origen_gpio_leds[] = {
- {
- .name = "origen::status1",
- .default_trigger = "heartbeat",
- .gpio = EXYNOS4_GPX1(3),
- .active_low = 1,
- },
- {
- .name = "origen::status2",
- .default_trigger = "mmc0",
- .gpio = EXYNOS4_GPX1(4),
- .active_low = 1,
- },
-};
-
-static struct gpio_led_platform_data origen_gpio_led_info = {
- .leds = origen_gpio_leds,
- .num_leds = ARRAY_SIZE(origen_gpio_leds),
-};
-
-static struct platform_device origen_leds_gpio = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &origen_gpio_led_info,
- },
-};
-
-static struct gpio_keys_button origen_gpio_keys_table[] = {
- {
- .code = KEY_MENU,
- .gpio = EXYNOS4_GPX1(5),
- .desc = "gpio-keys: KEY_MENU",
- .type = EV_KEY,
- .active_low = 1,
- .wakeup = 1,
- .debounce_interval = 1,
- }, {
- .code = KEY_HOME,
- .gpio = EXYNOS4_GPX1(6),
- .desc = "gpio-keys: KEY_HOME",
- .type = EV_KEY,
- .active_low = 1,
- .wakeup = 1,
- .debounce_interval = 1,
- }, {
- .code = KEY_BACK,
- .gpio = EXYNOS4_GPX1(7),
- .desc = "gpio-keys: KEY_BACK",
- .type = EV_KEY,
- .active_low = 1,
- .wakeup = 1,
- .debounce_interval = 1,
- }, {
- .code = KEY_UP,
- .gpio = EXYNOS4_GPX2(0),
- .desc = "gpio-keys: KEY_UP",
- .type = EV_KEY,
- .active_low = 1,
- .wakeup = 1,
- .debounce_interval = 1,
- }, {
- .code = KEY_DOWN,
- .gpio = EXYNOS4_GPX2(1),
- .desc = "gpio-keys: KEY_DOWN",
- .type = EV_KEY,
- .active_low = 1,
- .wakeup = 1,
- .debounce_interval = 1,
- },
-};
-
-static struct gpio_keys_platform_data origen_gpio_keys_data = {
- .buttons = origen_gpio_keys_table,
- .nbuttons = ARRAY_SIZE(origen_gpio_keys_table),
-};
-
-static struct platform_device origen_device_gpiokeys = {
- .name = "gpio-keys",
- .dev = {
- .platform_data = &origen_gpio_keys_data,
- },
-};
-
-static void lcd_hv070wsa_set_power(struct plat_lcd_data *pd, unsigned int power)
-{
- int ret;
-
- if (power)
- ret = gpio_request_one(EXYNOS4_GPE3(4),
- GPIOF_OUT_INIT_HIGH, "GPE3_4");
- else
- ret = gpio_request_one(EXYNOS4_GPE3(4),
- GPIOF_OUT_INIT_LOW, "GPE3_4");
-
- gpio_free(EXYNOS4_GPE3(4));
-
- if (ret)
- pr_err("failed to request gpio for LCD power: %d\n", ret);
-}
-
-static struct plat_lcd_data origen_lcd_hv070wsa_data = {
- .set_power = lcd_hv070wsa_set_power,
-};
-
-static struct platform_device origen_lcd_hv070wsa = {
- .name = "platform-lcd",
- .dev.parent = &s5p_device_fimd0.dev,
- .dev.platform_data = &origen_lcd_hv070wsa_data,
-};
-
-static struct pwm_lookup origen_pwm_lookup[] = {
- PWM_LOOKUP("s3c24xx-pwm.0", 0, "pwm-backlight.0", NULL),
-};
-
-#ifdef CONFIG_DRM_EXYNOS_FIMD
-static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
- .panel = {
- .timing = {
- .left_margin = 64,
- .right_margin = 16,
- .upper_margin = 64,
- .lower_margin = 16,
- .hsync_len = 48,
- .vsync_len = 3,
- .xres = 1024,
- .yres = 600,
- },
- },
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
- VIDCON1_INV_VCLK,
- .default_win = 0,
- .bpp = 32,
-};
-#else
-static struct s3c_fb_pd_win origen_fb_win0 = {
- .xres = 1024,
- .yres = 600,
- .max_bpp = 32,
- .default_bpp = 24,
- .virtual_x = 1024,
- .virtual_y = 2 * 600,
-};
-
-static struct fb_videomode origen_lcd_timing = {
- .left_margin = 64,
- .right_margin = 16,
- .upper_margin = 64,
- .lower_margin = 16,
- .hsync_len = 48,
- .vsync_len = 3,
- .xres = 1024,
- .yres = 600,
-};
-
-static struct s3c_fb_platdata origen_lcd_pdata __initdata = {
- .win[0] = &origen_fb_win0,
- .vtiming = &origen_lcd_timing,
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
- VIDCON1_INV_VCLK,
- .setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
-};
-#endif
-
-/* Bluetooth rfkill gpio platform data */
-static struct rfkill_gpio_platform_data origen_bt_pdata = {
- .reset_gpio = EXYNOS4_GPX2(2),
- .shutdown_gpio = -1,
- .type = RFKILL_TYPE_BLUETOOTH,
- .name = "origen-bt",
-};
-
-/* Bluetooth Platform device */
-static struct platform_device origen_device_bluetooth = {
- .name = "rfkill_gpio",
- .id = -1,
- .dev = {
- .platform_data = &origen_bt_pdata,
- },
-};
-
-static struct platform_device *origen_devices[] __initdata = {
- &s3c_device_hsmmc2,
- &s3c_device_hsmmc0,
- &s3c_device_i2c0,
- &s3c_device_rtc,
- &s3c_device_usb_hsotg,
- &s3c_device_wdt,
- &s5p_device_ehci,
- &s5p_device_fimc0,
- &s5p_device_fimc1,
- &s5p_device_fimc2,
- &s5p_device_fimc3,
- &s5p_device_fimc_md,
- &s5p_device_fimd0,
- &s5p_device_g2d,
- &s5p_device_hdmi,
- &s5p_device_i2c_hdmiphy,
- &s5p_device_jpeg,
- &s5p_device_mfc,
- &s5p_device_mfc_l,
- &s5p_device_mfc_r,
- &s5p_device_mixer,
- &exynos4_device_ohci,
- &origen_device_gpiokeys,
- &origen_lcd_hv070wsa,
- &origen_leds_gpio,
- &origen_device_bluetooth,
-};
-
-/* LCD Backlight data */
-static struct samsung_bl_gpio_info origen_bl_gpio_info = {
- .no = EXYNOS4_GPD0(0),
- .func = S3C_GPIO_SFN(2),
-};
-
-static struct platform_pwm_backlight_data origen_bl_data = {
- .pwm_id = 0,
- .pwm_period_ns = 1000,
-};
-
-static void __init origen_bt_setup(void)
-{
- gpio_request(EXYNOS4_GPA0(0), "GPIO BT_UART");
- /* 4 UART Pins configuration */
- s3c_gpio_cfgrange_nopull(EXYNOS4_GPA0(0), 4, S3C_GPIO_SFN(2));
- /* Setup BT Reset, this gpio will be requesed by rfkill-gpio */
- s3c_gpio_cfgpin(EXYNOS4_GPX2(2), S3C_GPIO_OUTPUT);
- s3c_gpio_setpull(EXYNOS4_GPX2(2), S3C_GPIO_PULL_NONE);
-}
-
-/* I2C module and id for HDMIPHY */
-static struct i2c_board_info hdmiphy_info = {
- I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38),
-};
-
-static void s5p_tv_setup(void)
-{
- /* Direct HPD to HDMI chip */
- gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug");
- s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
- s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
-}
-
-static void __init origen_map_io(void)
-{
- exynos_init_io(NULL, 0);
- s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
- xxti_f = 0;
- xusbxti_f = 24000000;
-}
-
-static void __init origen_power_init(void)
-{
- gpio_request(EXYNOS4_GPX0(4), "PMIC_IRQ");
- s3c_gpio_cfgpin(EXYNOS4_GPX0(4), S3C_GPIO_SFN(0xf));
- s3c_gpio_setpull(EXYNOS4_GPX0(4), S3C_GPIO_PULL_NONE);
-}
-
-static void __init origen_reserve(void)
-{
- s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
-}
-
-static void __init origen_machine_init(void)
-{
- origen_power_init();
-
- s3c_i2c0_set_platdata(NULL);
- i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));
-
- /*
- * Since sdhci instance 2 can contain a bootable media,
- * sdhci instance 0 is registered after instance 2.
- */
- s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata);
- s3c_sdhci0_set_platdata(&origen_hsmmc0_pdata);
-
- origen_ehci_init();
- origen_ohci_init();
- s3c_hsotg_set_platdata(&origen_hsotg_pdata);
-
- s5p_tv_setup();
- s5p_i2c_hdmiphy_set_platdata(NULL);
- s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0);
-
-#ifdef CONFIG_DRM_EXYNOS_FIMD
- s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
- exynos4_fimd0_gpio_setup_24bpp();
-#else
- s5p_fimd0_set_platdata(&origen_lcd_pdata);
-#endif
-
- platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
-
- pwm_add_table(origen_pwm_lookup, ARRAY_SIZE(origen_pwm_lookup));
- samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data);
-
- origen_bt_setup();
-}
-
-MACHINE_START(ORIGEN, "ORIGEN")
- /* Maintainer: JeongHyeon Kim <jhkim@insignal.co.kr> */
- .atag_offset = 0x100,
- .smp = smp_ops(exynos_smp_ops),
- .init_irq = exynos4_init_irq,
- .map_io = origen_map_io,
- .init_machine = origen_machine_init,
- .init_late = exynos_init_late,
- .init_time = exynos_init_time,
- .reserve = &origen_reserve,
- .restart = exynos4_restart,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-exynos4/mach-smdk4x12.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/lcd.h>
-#include <linux/mfd/max8997.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/regulator/machine.h>
-#include <linux/serial_core.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/s3c-hsotg.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <video/samsung_fimd.h>
-#include <plat/backlight.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
-#include <plat/gpio-cfg.h>
-#include <plat/keypad.h>
-#include <plat/mfc.h>
-#include <plat/regs-serial.h>
-#include <plat/sdhci.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <drm/exynos_drm.h>
-#include "common.h"
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define SMDK4X12_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
- S3C2410_UCON_RXILEVEL | \
- S3C2410_UCON_TXIRQMODE | \
- S3C2410_UCON_RXIRQMODE | \
- S3C2410_UCON_RXFIFO_TOI | \
- S3C2443_UCON_RXERR_IRQEN)
-
-#define SMDK4X12_ULCON_DEFAULT S3C2410_LCON_CS8
-
-#define SMDK4X12_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
- S5PV210_UFCON_TXTRIG4 | \
- S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg smdk4x12_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = SMDK4X12_UCON_DEFAULT,
- .ulcon = SMDK4X12_ULCON_DEFAULT,
- .ufcon = SMDK4X12_UFCON_DEFAULT,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = SMDK4X12_UCON_DEFAULT,
- .ulcon = SMDK4X12_ULCON_DEFAULT,
- .ufcon = SMDK4X12_UFCON_DEFAULT,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = SMDK4X12_UCON_DEFAULT,
- .ulcon = SMDK4X12_ULCON_DEFAULT,
- .ufcon = SMDK4X12_UFCON_DEFAULT,
- },
- [3] = {
- .hwport = 3,
- .flags = 0,
- .ucon = SMDK4X12_UCON_DEFAULT,
- .ulcon = SMDK4X12_ULCON_DEFAULT,
- .ufcon = SMDK4X12_UFCON_DEFAULT,
- },
-};
-
-static struct s3c_sdhci_platdata smdk4x12_hsmmc2_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_INTERNAL,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
- .max_width = 8,
- .host_caps = MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdk4x12_hsmmc3_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_INTERNAL,
-};
-
-static struct regulator_consumer_supply max8997_buck1 =
- REGULATOR_SUPPLY("vdd_arm", NULL);
-
-static struct regulator_consumer_supply max8997_buck2 =
- REGULATOR_SUPPLY("vdd_int", NULL);
-
-static struct regulator_consumer_supply max8997_buck3 =
- REGULATOR_SUPPLY("vdd_g3d", NULL);
-
-static struct regulator_init_data max8997_buck1_data = {
- .constraints = {
- .name = "VDD_ARM_SMDK4X12",
- .min_uV = 925000,
- .max_uV = 1350000,
- .always_on = 1,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &max8997_buck1,
-};
-
-static struct regulator_init_data max8997_buck2_data = {
- .constraints = {
- .name = "VDD_INT_SMDK4X12",
- .min_uV = 950000,
- .max_uV = 1150000,
- .always_on = 1,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &max8997_buck2,
-};
-
-static struct regulator_init_data max8997_buck3_data = {
- .constraints = {
- .name = "VDD_G3D_SMDK4X12",
- .min_uV = 950000,
- .max_uV = 1150000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &max8997_buck3,
-};
-
-static struct max8997_regulator_data smdk4x12_max8997_regulators[] = {
- { MAX8997_BUCK1, &max8997_buck1_data },
- { MAX8997_BUCK2, &max8997_buck2_data },
- { MAX8997_BUCK3, &max8997_buck3_data },
-};
-
-static struct max8997_platform_data smdk4x12_max8997_pdata = {
- .num_regulators = ARRAY_SIZE(smdk4x12_max8997_regulators),
- .regulators = smdk4x12_max8997_regulators,
-
- .buck1_voltage[0] = 1100000, /* 1.1V */
- .buck1_voltage[1] = 1100000, /* 1.1V */
- .buck1_voltage[2] = 1100000, /* 1.1V */
- .buck1_voltage[3] = 1100000, /* 1.1V */
- .buck1_voltage[4] = 1100000, /* 1.1V */
- .buck1_voltage[5] = 1100000, /* 1.1V */
- .buck1_voltage[6] = 1000000, /* 1.0V */
- .buck1_voltage[7] = 950000, /* 0.95V */
-
- .buck2_voltage[0] = 1100000, /* 1.1V */
- .buck2_voltage[1] = 1000000, /* 1.0V */
- .buck2_voltage[2] = 950000, /* 0.95V */
- .buck2_voltage[3] = 900000, /* 0.9V */
- .buck2_voltage[4] = 1100000, /* 1.1V */
- .buck2_voltage[5] = 1000000, /* 1.0V */
- .buck2_voltage[6] = 950000, /* 0.95V */
- .buck2_voltage[7] = 900000, /* 0.9V */
-
- .buck5_voltage[0] = 1100000, /* 1.1V */
- .buck5_voltage[1] = 1100000, /* 1.1V */
- .buck5_voltage[2] = 1100000, /* 1.1V */
- .buck5_voltage[3] = 1100000, /* 1.1V */
- .buck5_voltage[4] = 1100000, /* 1.1V */
- .buck5_voltage[5] = 1100000, /* 1.1V */
- .buck5_voltage[6] = 1100000, /* 1.1V */
- .buck5_voltage[7] = 1100000, /* 1.1V */
-};
-
-static struct i2c_board_info smdk4x12_i2c_devs0[] __initdata = {
- {
- I2C_BOARD_INFO("max8997", 0x66),
- .platform_data = &smdk4x12_max8997_pdata,
- }
-};
-
-static struct i2c_board_info smdk4x12_i2c_devs1[] __initdata = {
- { I2C_BOARD_INFO("wm8994", 0x1a), }
-};
-
-static struct i2c_board_info smdk4x12_i2c_devs3[] __initdata = {
- /* nothing here yet */
-};
-
-static struct i2c_board_info smdk4x12_i2c_devs7[] __initdata = {
- /* nothing here yet */
-};
-
-static struct samsung_bl_gpio_info smdk4x12_bl_gpio_info = {
- .no = EXYNOS4_GPD0(1),
- .func = S3C_GPIO_SFN(2),
-};
-
-static struct platform_pwm_backlight_data smdk4x12_bl_data = {
- .pwm_id = 1,
- .pwm_period_ns = 1000,
-};
-
-static struct pwm_lookup smdk4x12_pwm_lookup[] = {
- PWM_LOOKUP("s3c24xx-pwm.1", 0, "pwm-backlight.0", NULL),
-};
-
-static uint32_t smdk4x12_keymap[] __initdata = {
- /* KEY(row, col, keycode) */
- KEY(1, 3, KEY_1), KEY(1, 4, KEY_2), KEY(1, 5, KEY_3),
- KEY(1, 6, KEY_4), KEY(1, 7, KEY_5),
- KEY(2, 5, KEY_D), KEY(2, 6, KEY_A), KEY(2, 7, KEY_B),
- KEY(0, 7, KEY_E), KEY(0, 5, KEY_C)
-};
-
-static struct matrix_keymap_data smdk4x12_keymap_data __initdata = {
- .keymap = smdk4x12_keymap,
- .keymap_size = ARRAY_SIZE(smdk4x12_keymap),
-};
-
-static struct samsung_keypad_platdata smdk4x12_keypad_data __initdata = {
- .keymap_data = &smdk4x12_keymap_data,
- .rows = 3,
- .cols = 8,
-};
-
-#ifdef CONFIG_DRM_EXYNOS_FIMD
-static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
- .panel = {
- .timing = {
- .left_margin = 8,
- .right_margin = 8,
- .upper_margin = 6,
- .lower_margin = 6,
- .hsync_len = 6,
- .vsync_len = 4,
- .xres = 480,
- .yres = 800,
- },
- },
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
- .default_win = 0,
- .bpp = 32,
-};
-#else
-static struct s3c_fb_pd_win smdk4x12_fb_win0 = {
- .xres = 480,
- .yres = 800,
- .virtual_x = 480,
- .virtual_y = 800 * 2,
- .max_bpp = 32,
- .default_bpp = 24,
-};
-
-static struct fb_videomode smdk4x12_lcd_timing = {
- .left_margin = 8,
- .right_margin = 8,
- .upper_margin = 6,
- .lower_margin = 6,
- .hsync_len = 6,
- .vsync_len = 4,
- .xres = 480,
- .yres = 800,
-};
-
-static struct s3c_fb_platdata smdk4x12_lcd_pdata __initdata = {
- .win[0] = &smdk4x12_fb_win0,
- .vtiming = &smdk4x12_lcd_timing,
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
- .setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
-};
-#endif
-
-/* USB OTG */
-static struct s3c_hsotg_plat smdk4x12_hsotg_pdata;
-
-static struct platform_device *smdk4x12_devices[] __initdata = {
- &s3c_device_hsmmc2,
- &s3c_device_hsmmc3,
- &s3c_device_i2c0,
- &s3c_device_i2c1,
- &s3c_device_i2c3,
- &s3c_device_i2c7,
- &s3c_device_rtc,
- &s3c_device_usb_hsotg,
- &s3c_device_wdt,
- &s5p_device_fimc0,
- &s5p_device_fimc1,
- &s5p_device_fimc2,
- &s5p_device_fimc3,
- &s5p_device_fimc_md,
- &s5p_device_fimd0,
- &s5p_device_mfc,
- &s5p_device_mfc_l,
- &s5p_device_mfc_r,
- &samsung_device_keypad,
-};
-
-static void __init smdk4x12_map_io(void)
-{
- exynos_init_io(NULL, 0);
- s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs));
-}
-
-static void __init smdk4x12_reserve(void)
-{
- s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
-}
-
-static void __init smdk4x12_machine_init(void)
-{
- s3c_i2c0_set_platdata(NULL);
- i2c_register_board_info(0, smdk4x12_i2c_devs0,
- ARRAY_SIZE(smdk4x12_i2c_devs0));
-
- s3c_i2c1_set_platdata(NULL);
- i2c_register_board_info(1, smdk4x12_i2c_devs1,
- ARRAY_SIZE(smdk4x12_i2c_devs1));
-
- s3c_i2c3_set_platdata(NULL);
- i2c_register_board_info(3, smdk4x12_i2c_devs3,
- ARRAY_SIZE(smdk4x12_i2c_devs3));
-
- s3c_i2c7_set_platdata(NULL);
- i2c_register_board_info(7, smdk4x12_i2c_devs7,
- ARRAY_SIZE(smdk4x12_i2c_devs7));
-
- samsung_bl_set(&smdk4x12_bl_gpio_info, &smdk4x12_bl_data);
- pwm_add_table(smdk4x12_pwm_lookup, ARRAY_SIZE(smdk4x12_pwm_lookup));
-
- samsung_keypad_set_platdata(&smdk4x12_keypad_data);
-
- s3c_sdhci2_set_platdata(&smdk4x12_hsmmc2_pdata);
- s3c_sdhci3_set_platdata(&smdk4x12_hsmmc3_pdata);
-
- s3c_hsotg_set_platdata(&smdk4x12_hsotg_pdata);
-
-#ifdef CONFIG_DRM_EXYNOS_FIMD
- s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
- exynos4_fimd0_gpio_setup_24bpp();
-#else
- s5p_fimd0_set_platdata(&smdk4x12_lcd_pdata);
-#endif
-
- platform_add_devices(smdk4x12_devices, ARRAY_SIZE(smdk4x12_devices));
-}
-
-MACHINE_START(SMDK4212, "SMDK4212")
- /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- .atag_offset = 0x100,
- .smp = smp_ops(exynos_smp_ops),
- .init_irq = exynos4_init_irq,
- .map_io = smdk4x12_map_io,
- .init_machine = smdk4x12_machine_init,
- .init_time = exynos_init_time,
- .restart = exynos4_restart,
- .reserve = &smdk4x12_reserve,
-MACHINE_END
-
-MACHINE_START(SMDK4412, "SMDK4412")
- /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- /* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
- .atag_offset = 0x100,
- .smp = smp_ops(exynos_smp_ops),
- .init_irq = exynos4_init_irq,
- .map_io = smdk4x12_map_io,
- .init_machine = smdk4x12_machine_init,
- .init_late = exynos_init_late,
- .init_time = exynos_init_time,
- .restart = exynos4_restart,
- .reserve = &smdk4x12_reserve,
-MACHINE_END
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/mach-smdkv310.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/serial_core.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/lcd.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-#include <linux/smsc911x.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/input.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/s3c-hsotg.h>
-#include <linux/platform_data/usb-ehci-s5p.h>
-#include <linux/platform_data/usb-ohci-exynos.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <video/platform_lcd.h>
-#include <video/samsung_fimd.h>
-#include <plat/regs-serial.h>
-#include <plat/regs-srom.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
-#include <plat/keypad.h>
-#include <plat/sdhci.h>
-#include <plat/gpio-cfg.h>
-#include <plat/backlight.h>
-#include <plat/mfc.h>
-#include <plat/clock.h>
-#include <plat/hdmi.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <drm/exynos_drm.h>
-#include "common.h"
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define SMDKV310_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
- S3C2410_UCON_RXILEVEL | \
- S3C2410_UCON_TXIRQMODE | \
- S3C2410_UCON_RXIRQMODE | \
- S3C2410_UCON_RXFIFO_TOI | \
- S3C2443_UCON_RXERR_IRQEN)
-
-#define SMDKV310_ULCON_DEFAULT S3C2410_LCON_CS8
-
-#define SMDKV310_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
- S5PV210_UFCON_TXTRIG4 | \
- S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg smdkv310_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = SMDKV310_UCON_DEFAULT,
- .ulcon = SMDKV310_ULCON_DEFAULT,
- .ufcon = SMDKV310_UFCON_DEFAULT,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = SMDKV310_UCON_DEFAULT,
- .ulcon = SMDKV310_ULCON_DEFAULT,
- .ufcon = SMDKV310_UFCON_DEFAULT,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = SMDKV310_UCON_DEFAULT,
- .ulcon = SMDKV310_ULCON_DEFAULT,
- .ufcon = SMDKV310_UFCON_DEFAULT,
- },
- [3] = {
- .hwport = 3,
- .flags = 0,
- .ucon = SMDKV310_UCON_DEFAULT,
- .ulcon = SMDKV310_ULCON_DEFAULT,
- .ufcon = SMDKV310_UFCON_DEFAULT,
- },
-};
-
-static struct s3c_sdhci_platdata smdkv310_hsmmc0_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_INTERNAL,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT
- .max_width = 8,
- .host_caps = MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdkv310_hsmmc1_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_GPIO,
- .ext_cd_gpio = EXYNOS4_GPK0(2),
- .ext_cd_gpio_invert = 1,
-};
-
-static struct s3c_sdhci_platdata smdkv310_hsmmc2_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_INTERNAL,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
- .max_width = 8,
- .host_caps = MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdkv310_hsmmc3_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_GPIO,
- .ext_cd_gpio = EXYNOS4_GPK2(2),
- .ext_cd_gpio_invert = 1,
-};
-
-static void lcd_lte480wv_set_power(struct plat_lcd_data *pd,
- unsigned int power)
-{
- if (power) {
-#if !defined(CONFIG_BACKLIGHT_PWM)
- gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_HIGH, "GPD0");
- gpio_free(EXYNOS4_GPD0(1));
-#endif
- /* fire nRESET on power up */
- gpio_request_one(EXYNOS4_GPX0(6), GPIOF_OUT_INIT_HIGH, "GPX0");
- mdelay(100);
-
- gpio_set_value(EXYNOS4_GPX0(6), 0);
- mdelay(10);
-
- gpio_set_value(EXYNOS4_GPX0(6), 1);
- mdelay(10);
-
- gpio_free(EXYNOS4_GPX0(6));
- } else {
-#if !defined(CONFIG_BACKLIGHT_PWM)
- gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_LOW, "GPD0");
- gpio_free(EXYNOS4_GPD0(1));
-#endif
- }
-}
-
-static struct plat_lcd_data smdkv310_lcd_lte480wv_data = {
- .set_power = lcd_lte480wv_set_power,
-};
-
-static struct platform_device smdkv310_lcd_lte480wv = {
- .name = "platform-lcd",
- .dev.parent = &s5p_device_fimd0.dev,
- .dev.platform_data = &smdkv310_lcd_lte480wv_data,
-};
-
-#ifdef CONFIG_DRM_EXYNOS_FIMD
-static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
- .panel = {
- .timing = {
- .left_margin = 13,
- .right_margin = 8,
- .upper_margin = 7,
- .lower_margin = 5,
- .hsync_len = 3,
- .vsync_len = 1,
- .xres = 800,
- .yres = 480,
- },
- },
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
- .default_win = 0,
- .bpp = 32,
-};
-#else
-static struct s3c_fb_pd_win smdkv310_fb_win0 = {
- .max_bpp = 32,
- .default_bpp = 24,
- .xres = 800,
- .yres = 480,
-};
-
-static struct fb_videomode smdkv310_lcd_timing = {
- .left_margin = 13,
- .right_margin = 8,
- .upper_margin = 7,
- .lower_margin = 5,
- .hsync_len = 3,
- .vsync_len = 1,
- .xres = 800,
- .yres = 480,
-};
-
-static struct s3c_fb_platdata smdkv310_lcd0_pdata __initdata = {
- .win[0] = &smdkv310_fb_win0,
- .vtiming = &smdkv310_lcd_timing,
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
- .setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
-};
-#endif
-
-static struct resource smdkv310_smsc911x_resources[] = {
- [0] = DEFINE_RES_MEM(EXYNOS4_PA_SROM_BANK(1), SZ_64K),
- [1] = DEFINE_RES_NAMED(IRQ_EINT(5), 1, NULL, IORESOURCE_IRQ \
- | IRQF_TRIGGER_LOW),
-};
-
-static struct smsc911x_platform_config smsc9215_config = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
- .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
-};
-
-static struct platform_device smdkv310_smsc911x = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smdkv310_smsc911x_resources),
- .resource = smdkv310_smsc911x_resources,
- .dev = {
- .platform_data = &smsc9215_config,
- },
-};
-
-static uint32_t smdkv310_keymap[] __initdata = {
- /* KEY(row, col, keycode) */
- KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
- KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
- KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
- KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
-};
-
-static struct matrix_keymap_data smdkv310_keymap_data __initdata = {
- .keymap = smdkv310_keymap,
- .keymap_size = ARRAY_SIZE(smdkv310_keymap),
-};
-
-static struct samsung_keypad_platdata smdkv310_keypad_data __initdata = {
- .keymap_data = &smdkv310_keymap_data,
- .rows = 2,
- .cols = 8,
-};
-
-static struct i2c_board_info i2c_devs1[] __initdata = {
- {I2C_BOARD_INFO("wm8994", 0x1a),},
-};
-
-/* USB EHCI */
-static struct s5p_ehci_platdata smdkv310_ehci_pdata;
-
-static void __init smdkv310_ehci_init(void)
-{
- struct s5p_ehci_platdata *pdata = &smdkv310_ehci_pdata;
-
- s5p_ehci_set_platdata(pdata);
-}
-
-/* USB OHCI */
-static struct exynos4_ohci_platdata smdkv310_ohci_pdata;
-
-static void __init smdkv310_ohci_init(void)
-{
- struct exynos4_ohci_platdata *pdata = &smdkv310_ohci_pdata;
-
- exynos4_ohci_set_platdata(pdata);
-}
-
-/* USB OTG */
-static struct s3c_hsotg_plat smdkv310_hsotg_pdata;
-
-/* Audio device */
-static struct platform_device smdkv310_device_audio = {
- .name = "smdk-audio",
- .id = -1,
-};
-
-static struct platform_device *smdkv310_devices[] __initdata = {
- &s3c_device_hsmmc0,
- &s3c_device_hsmmc1,
- &s3c_device_hsmmc2,
- &s3c_device_hsmmc3,
- &s3c_device_i2c1,
- &s5p_device_i2c_hdmiphy,
- &s3c_device_rtc,
- &s3c_device_usb_hsotg,
- &s3c_device_wdt,
- &s5p_device_ehci,
- &s5p_device_fimc0,
- &s5p_device_fimc1,
- &s5p_device_fimc2,
- &s5p_device_fimc3,
- &s5p_device_fimc_md,
- &s5p_device_g2d,
- &s5p_device_jpeg,
- &exynos4_device_ac97,
- &exynos4_device_i2s0,
- &exynos4_device_ohci,
- &samsung_device_keypad,
- &s5p_device_mfc,
- &s5p_device_mfc_l,
- &s5p_device_mfc_r,
- &exynos4_device_spdif,
- &samsung_asoc_idma,
- &s5p_device_fimd0,
- &smdkv310_device_audio,
- &smdkv310_lcd_lte480wv,
- &smdkv310_smsc911x,
- &exynos4_device_ahci,
- &s5p_device_hdmi,
- &s5p_device_mixer,
-};
-
-static void __init smdkv310_smsc911x_init(void)
-{
- u32 cs1;
-
- /* configure nCS1 width to 16 bits */
- cs1 = __raw_readl(S5P_SROM_BW) &
- ~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT);
- cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) |
- (1 << S5P_SROM_BW__WAITENABLE__SHIFT) |
- (1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) <<
- S5P_SROM_BW__NCS1__SHIFT;
- __raw_writel(cs1, S5P_SROM_BW);
-
- /* set timing for nCS1 suitable for ethernet chip */
- __raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) |
- (0x9 << S5P_SROM_BCX__TACP__SHIFT) |
- (0xc << S5P_SROM_BCX__TCAH__SHIFT) |
- (0x1 << S5P_SROM_BCX__TCOH__SHIFT) |
- (0x6 << S5P_SROM_BCX__TACC__SHIFT) |
- (0x1 << S5P_SROM_BCX__TCOS__SHIFT) |
- (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1);
-}
-
-/* LCD Backlight data */
-static struct samsung_bl_gpio_info smdkv310_bl_gpio_info = {
- .no = EXYNOS4_GPD0(1),
- .func = S3C_GPIO_SFN(2),
-};
-
-static struct platform_pwm_backlight_data smdkv310_bl_data = {
- .pwm_id = 1,
- .pwm_period_ns = 1000,
-};
-
-/* I2C module and id for HDMIPHY */
-static struct i2c_board_info hdmiphy_info = {
- I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38),
-};
-
-static struct pwm_lookup smdkv310_pwm_lookup[] = {
- PWM_LOOKUP("s3c24xx-pwm.1", 0, "pwm-backlight.0", NULL),
-};
-
-static void s5p_tv_setup(void)
-{
- /* direct HPD to HDMI chip */
- WARN_ON(gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug"));
- s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
- s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
-}
-
-static void __init smdkv310_map_io(void)
-{
- exynos_init_io(NULL, 0);
- s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs));
- xxti_f = 12000000;
- xusbxti_f = 24000000;
-}
-
-static void __init smdkv310_reserve(void)
-{
- s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
-}
-
-static void __init smdkv310_machine_init(void)
-{
- s3c_i2c1_set_platdata(NULL);
- i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
-
- smdkv310_smsc911x_init();
-
- s3c_sdhci0_set_platdata(&smdkv310_hsmmc0_pdata);
- s3c_sdhci1_set_platdata(&smdkv310_hsmmc1_pdata);
- s3c_sdhci2_set_platdata(&smdkv310_hsmmc2_pdata);
- s3c_sdhci3_set_platdata(&smdkv310_hsmmc3_pdata);
-
- s5p_tv_setup();
- s5p_i2c_hdmiphy_set_platdata(NULL);
- s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0);
-
- samsung_keypad_set_platdata(&smdkv310_keypad_data);
-
- samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
- pwm_add_table(smdkv310_pwm_lookup, ARRAY_SIZE(smdkv310_pwm_lookup));
-
-#ifdef CONFIG_DRM_EXYNOS_FIMD
- s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
- exynos4_fimd0_gpio_setup_24bpp();
-#else
- s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata);
-#endif
-
- smdkv310_ehci_init();
- smdkv310_ohci_init();
- s3c_hsotg_set_platdata(&smdkv310_hsotg_pdata);
-
- platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
-}
-
-MACHINE_START(SMDKV310, "SMDKV310")
- /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- /* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
- .atag_offset = 0x100,
- .smp = smp_ops(exynos_smp_ops),
- .init_irq = exynos4_init_irq,
- .map_io = smdkv310_map_io,
- .init_machine = smdkv310_machine_init,
- .init_time = exynos_init_time,
- .reserve = &smdkv310_reserve,
- .restart = exynos4_restart,
-MACHINE_END
-
-MACHINE_START(SMDKC210, "SMDKC210")
- /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- .atag_offset = 0x100,
- .smp = smp_ops(exynos_smp_ops),
- .init_irq = exynos4_init_irq,
- .map_io = smdkv310_map_io,
- .init_machine = smdkv310_machine_init,
- .init_late = exynos_init_late,
- .init_time = exynos_init_time,
- .reserve = &smdkv310_reserve,
- .restart = exynos4_restart,
-MACHINE_END
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/mach-universal_c210.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/gpio_keys.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/fb.h>
-#include <linux/mfd/max8998.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/max8952.h>
-#include <linux/mmc/host.h>
-#include <linux/i2c-gpio.h>
-#include <linux/i2c/mcs.h>
-#include <linux/i2c/atmel_mxt_ts.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/mipi-csis.h>
-#include <linux/platform_data/s3c-hsotg.h>
-#include <drm/exynos_drm.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <video/samsung_fimd.h>
-#include <plat/regs-serial.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
-#include <plat/fb.h>
-#include <plat/mfc.h>
-#include <plat/sdhci.h>
-#include <plat/fimc-core.h>
-#include <plat/camport.h>
-
-#include <mach/map.h>
-
-#include <media/v4l2-mediabus.h>
-#include <media/s5p_fimc.h>
-#include <media/m5mols.h>
-#include <media/s5k6aa.h>
-
-#include "common.h"
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define UNIVERSAL_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
- S3C2410_UCON_RXILEVEL | \
- S3C2410_UCON_TXIRQMODE | \
- S3C2410_UCON_RXIRQMODE | \
- S3C2410_UCON_RXFIFO_TOI | \
- S3C2443_UCON_RXERR_IRQEN)
-
-#define UNIVERSAL_ULCON_DEFAULT S3C2410_LCON_CS8
-
-#define UNIVERSAL_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
- S5PV210_UFCON_TXTRIG256 | \
- S5PV210_UFCON_RXTRIG256)
-
-static struct s3c2410_uartcfg universal_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .ucon = UNIVERSAL_UCON_DEFAULT,
- .ulcon = UNIVERSAL_ULCON_DEFAULT,
- .ufcon = UNIVERSAL_UFCON_DEFAULT,
- },
- [1] = {
- .hwport = 1,
- .ucon = UNIVERSAL_UCON_DEFAULT,
- .ulcon = UNIVERSAL_ULCON_DEFAULT,
- .ufcon = UNIVERSAL_UFCON_DEFAULT,
- },
- [2] = {
- .hwport = 2,
- .ucon = UNIVERSAL_UCON_DEFAULT,
- .ulcon = UNIVERSAL_ULCON_DEFAULT,
- .ufcon = UNIVERSAL_UFCON_DEFAULT,
- },
- [3] = {
- .hwport = 3,
- .ucon = UNIVERSAL_UCON_DEFAULT,
- .ulcon = UNIVERSAL_ULCON_DEFAULT,
- .ufcon = UNIVERSAL_UFCON_DEFAULT,
- },
-};
-
-static struct regulator_consumer_supply max8952_consumer =
- REGULATOR_SUPPLY("vdd_arm", NULL);
-
-static struct regulator_init_data universal_max8952_reg_data = {
- .constraints = {
- .name = "VARM_1.2V",
- .min_uV = 770000,
- .max_uV = 1400000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .always_on = 1,
- .boot_on = 1,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &max8952_consumer,
-};
-
-static struct max8952_platform_data universal_max8952_pdata __initdata = {
- .gpio_vid0 = EXYNOS4_GPX0(3),
- .gpio_vid1 = EXYNOS4_GPX0(4),
- .gpio_en = -1, /* Not controllable, set "Always High" */
- .default_mode = 0, /* vid0 = 0, vid1 = 0 */
- .dvs_mode = { 48, 32, 28, 18 }, /* 1.25, 1.20, 1.05, 0.95V */
- .sync_freq = 0, /* default: fastest */
- .ramp_speed = 0, /* default: fastest */
- .reg_data = &universal_max8952_reg_data,
-};
-
-static struct regulator_consumer_supply lp3974_buck1_consumer =
- REGULATOR_SUPPLY("vdd_int", NULL);
-
-static struct regulator_consumer_supply lp3974_buck2_consumer =
- REGULATOR_SUPPLY("vddg3d", NULL);
-
-static struct regulator_consumer_supply lp3974_buck3_consumer[] = {
- REGULATOR_SUPPLY("vdet", "s5p-sdo"),
- REGULATOR_SUPPLY("vdd_reg", "0-003c"),
-};
-
-static struct regulator_init_data lp3974_buck1_data = {
- .constraints = {
- .name = "VINT_1.1V",
- .min_uV = 750000,
- .max_uV = 1500000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &lp3974_buck1_consumer,
-};
-
-static struct regulator_init_data lp3974_buck2_data = {
- .constraints = {
- .name = "VG3D_1.1V",
- .min_uV = 750000,
- .max_uV = 1500000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &lp3974_buck2_consumer,
-};
-
-static struct regulator_init_data lp3974_buck3_data = {
- .constraints = {
- .name = "VCC_1.8V",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .enabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(lp3974_buck3_consumer),
- .consumer_supplies = lp3974_buck3_consumer,
-};
-
-static struct regulator_init_data lp3974_buck4_data = {
- .constraints = {
- .name = "VMEM_1.2V",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data lp3974_ldo2_data = {
- .constraints = {
- .name = "VALIVE_1.2V",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .enabled = 1,
- },
- },
-};
-
-static struct regulator_consumer_supply lp3974_ldo3_consumer[] = {
- REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"),
- REGULATOR_SUPPLY("vdd", "exynos4-hdmi"),
- REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"),
- REGULATOR_SUPPLY("vddcore", "s5p-mipi-csis.0"),
-};
-
-static struct regulator_init_data lp3974_ldo3_data = {
- .constraints = {
- .name = "VUSB+MIPI_1.1V",
- .min_uV = 1100000,
- .max_uV = 1100000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo3_consumer),
- .consumer_supplies = lp3974_ldo3_consumer,
-};
-
-static struct regulator_consumer_supply lp3974_ldo4_consumer[] = {
- REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"),
-};
-
-static struct regulator_init_data lp3974_ldo4_data = {
- .constraints = {
- .name = "VADC_3.3V",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo4_consumer),
- .consumer_supplies = lp3974_ldo4_consumer,
-};
-
-static struct regulator_init_data lp3974_ldo5_data = {
- .constraints = {
- .name = "VTF_2.8V",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data lp3974_ldo6_data = {
- .constraints = {
- .name = "LDO6",
- .min_uV = 2000000,
- .max_uV = 2000000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_consumer_supply lp3974_ldo7_consumer[] = {
- REGULATOR_SUPPLY("vddio", "s5p-mipi-csis.0"),
-};
-
-static struct regulator_init_data lp3974_ldo7_data = {
- .constraints = {
- .name = "VLCD+VMIPI_1.8V",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo7_consumer),
- .consumer_supplies = lp3974_ldo7_consumer,
-};
-
-static struct regulator_consumer_supply lp3974_ldo8_consumer[] = {
- REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"),
- REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"),
-};
-
-static struct regulator_init_data lp3974_ldo8_data = {
- .constraints = {
- .name = "VUSB+VDAC_3.3V",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo8_consumer),
- .consumer_supplies = lp3974_ldo8_consumer,
-};
-
-static struct regulator_consumer_supply lp3974_ldo9_consumer =
- REGULATOR_SUPPLY("vddio", "0-003c");
-
-static struct regulator_init_data lp3974_ldo9_data = {
- .constraints = {
- .name = "VCC_2.8V",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .enabled = 1,
- },
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &lp3974_ldo9_consumer,
-};
-
-static struct regulator_init_data lp3974_ldo10_data = {
- .constraints = {
- .name = "VPLL_1.1V",
- .min_uV = 1100000,
- .max_uV = 1100000,
- .boot_on = 1,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_consumer_supply lp3974_ldo11_consumer =
- REGULATOR_SUPPLY("dig_28", "0-001f");
-
-static struct regulator_init_data lp3974_ldo11_data = {
- .constraints = {
- .name = "CAM_AF_3.3V",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &lp3974_ldo11_consumer,
-};
-
-static struct regulator_init_data lp3974_ldo12_data = {
- .constraints = {
- .name = "PS_2.8V",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data lp3974_ldo13_data = {
- .constraints = {
- .name = "VHIC_1.2V",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_consumer_supply lp3974_ldo14_consumer =
- REGULATOR_SUPPLY("dig_18", "0-001f");
-
-static struct regulator_init_data lp3974_ldo14_data = {
- .constraints = {
- .name = "CAM_I_HOST_1.8V",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &lp3974_ldo14_consumer,
-};
-
-
-static struct regulator_consumer_supply lp3974_ldo15_consumer =
- REGULATOR_SUPPLY("dig_12", "0-001f");
-
-static struct regulator_init_data lp3974_ldo15_data = {
- .constraints = {
- .name = "CAM_S_DIG+FM33_CORE_1.2V",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &lp3974_ldo15_consumer,
-};
-
-static struct regulator_consumer_supply lp3974_ldo16_consumer[] = {
- REGULATOR_SUPPLY("vdda", "0-003c"),
- REGULATOR_SUPPLY("a_sensor", "0-001f"),
-};
-
-static struct regulator_init_data lp3974_ldo16_data = {
- .constraints = {
- .name = "CAM_S_ANA_2.8V",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo16_consumer),
- .consumer_supplies = lp3974_ldo16_consumer,
-};
-
-static struct regulator_init_data lp3974_ldo17_data = {
- .constraints = {
- .name = "VCC_3.0V_LCD",
- .min_uV = 3000000,
- .max_uV = 3000000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data lp3974_32khz_ap_data = {
- .constraints = {
- .name = "32KHz AP",
- .always_on = 1,
- .state_mem = {
- .enabled = 1,
- },
- },
-};
-
-static struct regulator_init_data lp3974_32khz_cp_data = {
- .constraints = {
- .name = "32KHz CP",
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data lp3974_vichg_data = {
- .constraints = {
- .name = "VICHG",
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data lp3974_esafeout1_data = {
- .constraints = {
- .name = "SAFEOUT1",
- .min_uV = 4800000,
- .max_uV = 4800000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .always_on = 1,
- .state_mem = {
- .enabled = 1,
- },
- },
-};
-
-static struct regulator_init_data lp3974_esafeout2_data = {
- .constraints = {
- .name = "SAFEOUT2",
- .boot_on = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .enabled = 1,
- },
- },
-};
-
-static struct max8998_regulator_data lp3974_regulators[] = {
- { MAX8998_LDO2, &lp3974_ldo2_data },
- { MAX8998_LDO3, &lp3974_ldo3_data },
- { MAX8998_LDO4, &lp3974_ldo4_data },
- { MAX8998_LDO5, &lp3974_ldo5_data },
- { MAX8998_LDO6, &lp3974_ldo6_data },
- { MAX8998_LDO7, &lp3974_ldo7_data },
- { MAX8998_LDO8, &lp3974_ldo8_data },
- { MAX8998_LDO9, &lp3974_ldo9_data },
- { MAX8998_LDO10, &lp3974_ldo10_data },
- { MAX8998_LDO11, &lp3974_ldo11_data },
- { MAX8998_LDO12, &lp3974_ldo12_data },
- { MAX8998_LDO13, &lp3974_ldo13_data },
- { MAX8998_LDO14, &lp3974_ldo14_data },
- { MAX8998_LDO15, &lp3974_ldo15_data },
- { MAX8998_LDO16, &lp3974_ldo16_data },
- { MAX8998_LDO17, &lp3974_ldo17_data },
- { MAX8998_BUCK1, &lp3974_buck1_data },
- { MAX8998_BUCK2, &lp3974_buck2_data },
- { MAX8998_BUCK3, &lp3974_buck3_data },
- { MAX8998_BUCK4, &lp3974_buck4_data },
- { MAX8998_EN32KHZ_AP, &lp3974_32khz_ap_data },
- { MAX8998_EN32KHZ_CP, &lp3974_32khz_cp_data },
- { MAX8998_ENVICHG, &lp3974_vichg_data },
- { MAX8998_ESAFEOUT1, &lp3974_esafeout1_data },
- { MAX8998_ESAFEOUT2, &lp3974_esafeout2_data },
-};
-
-static struct max8998_platform_data universal_lp3974_pdata = {
- .num_regulators = ARRAY_SIZE(lp3974_regulators),
- .regulators = lp3974_regulators,
- .buck1_voltage1 = 1100000, /* INT */
- .buck1_voltage2 = 1000000,
- .buck1_voltage3 = 1100000,
- .buck1_voltage4 = 1000000,
- .buck1_set1 = EXYNOS4_GPX0(5),
- .buck1_set2 = EXYNOS4_GPX0(6),
- .buck2_voltage1 = 1200000, /* G3D */
- .buck2_voltage2 = 1100000,
- .buck1_default_idx = 0,
- .buck2_set3 = EXYNOS4_GPE2(0),
- .buck2_default_idx = 0,
- .wakeup = true,
-};
-
-
-enum fixed_regulator_id {
- FIXED_REG_ID_MMC0,
- FIXED_REG_ID_HDMI_5V,
- FIXED_REG_ID_CAM_S_IF,
- FIXED_REG_ID_CAM_I_CORE,
- FIXED_REG_ID_CAM_VT_DIO,
-};
-
-static struct regulator_consumer_supply hdmi_fixed_consumer =
- REGULATOR_SUPPLY("hdmi-en", "exynos4-hdmi");
-
-static struct regulator_init_data hdmi_fixed_voltage_init_data = {
- .constraints = {
- .name = "HDMI_5V",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &hdmi_fixed_consumer,
-};
-
-static struct fixed_voltage_config hdmi_fixed_voltage_config = {
- .supply_name = "HDMI_EN1",
- .microvolts = 5000000,
- .gpio = EXYNOS4_GPE0(1),
- .enable_high = true,
- .init_data = &hdmi_fixed_voltage_init_data,
-};
-
-static struct platform_device hdmi_fixed_voltage = {
- .name = "reg-fixed-voltage",
- .id = FIXED_REG_ID_HDMI_5V,
- .dev = {
- .platform_data = &hdmi_fixed_voltage_config,
- },
-};
-
-/* GPIO I2C 5 (PMIC) */
-static struct i2c_board_info i2c5_devs[] __initdata = {
- {
- I2C_BOARD_INFO("max8952", 0xC0 >> 1),
- .platform_data = &universal_max8952_pdata,
- }, {
- I2C_BOARD_INFO("lp3974", 0xCC >> 1),
- .platform_data = &universal_lp3974_pdata,
- },
-};
-
-/* I2C3 (TSP) */
-static struct mxt_platform_data qt602240_platform_data = {
- .x_line = 19,
- .y_line = 11,
- .x_size = 800,
- .y_size = 480,
- .blen = 0x11,
- .threshold = 0x28,
- .voltage = 2800000, /* 2.8V */
- .orient = MXT_DIAGONAL,
- .irqflags = IRQF_TRIGGER_FALLING,
-};
-
-static struct i2c_board_info i2c3_devs[] __initdata = {
- {
- I2C_BOARD_INFO("qt602240_ts", 0x4a),
- .platform_data = &qt602240_platform_data,
- },
-};
-
-static void __init universal_tsp_init(void)
-{
- int gpio;
-
- /* TSP_LDO_ON: XMDMADDR_11 */
- gpio = EXYNOS4_GPE2(3);
- gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "TSP_LDO_ON");
- gpio_export(gpio, 0);
-
- /* TSP_INT: XMDMADDR_7 */
- gpio = EXYNOS4_GPE1(7);
- gpio_request(gpio, "TSP_INT");
-
- s5p_register_gpio_interrupt(gpio);
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
- i2c3_devs[0].irq = gpio_to_irq(gpio);
-}
-
-
-/* GPIO I2C 12 (3 Touchkey) */
-static uint32_t touchkey_keymap[] = {
- /* MCS_KEY_MAP(value, keycode) */
- MCS_KEY_MAP(0, KEY_MENU), /* KEY_SEND */
- MCS_KEY_MAP(1, KEY_BACK), /* KEY_END */
-};
-
-static struct mcs_platform_data touchkey_data = {
- .keymap = touchkey_keymap,
- .keymap_size = ARRAY_SIZE(touchkey_keymap),
- .key_maxval = 2,
-};
-
-/* GPIO I2C 3_TOUCH 2.8V */
-#define I2C_GPIO_BUS_12 12
-static struct i2c_gpio_platform_data i2c_gpio12_data = {
- .sda_pin = EXYNOS4_GPE4(0), /* XMDMDATA_8 */
- .scl_pin = EXYNOS4_GPE4(1), /* XMDMDATA_9 */
-};
-
-static struct platform_device i2c_gpio12 = {
- .name = "i2c-gpio",
- .id = I2C_GPIO_BUS_12,
- .dev = {
- .platform_data = &i2c_gpio12_data,
- },
-};
-
-static struct i2c_board_info i2c_gpio12_devs[] __initdata = {
- {
- I2C_BOARD_INFO("mcs5080_touchkey", 0x20),
- .platform_data = &touchkey_data,
- },
-};
-
-static void __init universal_touchkey_init(void)
-{
- int gpio;
-
- gpio = EXYNOS4_GPE3(7); /* XMDMDATA_7 */
- gpio_request(gpio, "3_TOUCH_INT");
- s5p_register_gpio_interrupt(gpio);
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
- i2c_gpio12_devs[0].irq = gpio_to_irq(gpio);
-
- gpio = EXYNOS4_GPE3(3); /* XMDMDATA_3 */
- gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "3_TOUCH_EN");
-}
-
-static struct s3c2410_platform_i2c universal_i2c0_platdata __initdata = {
- .frequency = 300 * 1000,
- .sda_delay = 200,
-};
-
-/* GPIO KEYS */
-static struct gpio_keys_button universal_gpio_keys_tables[] = {
- {
- .code = KEY_VOLUMEUP,
- .gpio = EXYNOS4_GPX2(0), /* XEINT16 */
- .desc = "gpio-keys: KEY_VOLUMEUP",
- .type = EV_KEY,
- .active_low = 1,
- .debounce_interval = 1,
- }, {
- .code = KEY_VOLUMEDOWN,
- .gpio = EXYNOS4_GPX2(1), /* XEINT17 */
- .desc = "gpio-keys: KEY_VOLUMEDOWN",
- .type = EV_KEY,
- .active_low = 1,
- .debounce_interval = 1,
- }, {
- .code = KEY_CONFIG,
- .gpio = EXYNOS4_GPX2(2), /* XEINT18 */
- .desc = "gpio-keys: KEY_CONFIG",
- .type = EV_KEY,
- .active_low = 1,
- .debounce_interval = 1,
- }, {
- .code = KEY_CAMERA,
- .gpio = EXYNOS4_GPX2(3), /* XEINT19 */
- .desc = "gpio-keys: KEY_CAMERA",
- .type = EV_KEY,
- .active_low = 1,
- .debounce_interval = 1,
- }, {
- .code = KEY_OK,
- .gpio = EXYNOS4_GPX3(5), /* XEINT29 */
- .desc = "gpio-keys: KEY_OK",
- .type = EV_KEY,
- .active_low = 1,
- .debounce_interval = 1,
- },
-};
-
-static struct gpio_keys_platform_data universal_gpio_keys_data = {
- .buttons = universal_gpio_keys_tables,
- .nbuttons = ARRAY_SIZE(universal_gpio_keys_tables),
-};
-
-static struct platform_device universal_gpio_keys = {
- .name = "gpio-keys",
- .dev = {
- .platform_data = &universal_gpio_keys_data,
- },
-};
-
-/* eMMC */
-static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = {
- .max_width = 8,
- .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
- MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
- .cd_type = S3C_SDHCI_CD_PERMANENT,
-};
-
-static struct regulator_consumer_supply mmc0_supplies[] = {
- REGULATOR_SUPPLY("vmmc", "exynos4-sdhci.0"),
-};
-
-static struct regulator_init_data mmc0_fixed_voltage_init_data = {
- .constraints = {
- .name = "VMEM_VDD_2.8V",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(mmc0_supplies),
- .consumer_supplies = mmc0_supplies,
-};
-
-static struct fixed_voltage_config mmc0_fixed_voltage_config = {
- .supply_name = "MASSMEMORY_EN",
- .microvolts = 2800000,
- .gpio = EXYNOS4_GPE1(3),
- .enable_high = true,
- .init_data = &mmc0_fixed_voltage_init_data,
-};
-
-static struct platform_device mmc0_fixed_voltage = {
- .name = "reg-fixed-voltage",
- .id = FIXED_REG_ID_MMC0,
- .dev = {
- .platform_data = &mmc0_fixed_voltage_config,
- },
-};
-
-/* SD */
-static struct s3c_sdhci_platdata universal_hsmmc2_data __initdata = {
- .max_width = 4,
- .host_caps = MMC_CAP_4_BIT_DATA |
- MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
- .ext_cd_gpio = EXYNOS4_GPX3(4), /* XEINT_28 */
- .ext_cd_gpio_invert = 1,
- .cd_type = S3C_SDHCI_CD_GPIO,
-};
-
-/* WiFi */
-static struct s3c_sdhci_platdata universal_hsmmc3_data __initdata = {
- .max_width = 4,
- .host_caps = MMC_CAP_4_BIT_DATA |
- MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
- .cd_type = S3C_SDHCI_CD_EXTERNAL,
-};
-
-static void __init universal_sdhci_init(void)
-{
- s3c_sdhci0_set_platdata(&universal_hsmmc0_data);
- s3c_sdhci2_set_platdata(&universal_hsmmc2_data);
- s3c_sdhci3_set_platdata(&universal_hsmmc3_data);
-}
-
-/* I2C1 */
-static struct i2c_board_info i2c1_devs[] __initdata = {
- /* Gyro, To be updated */
-};
-
-#ifdef CONFIG_DRM_EXYNOS
-static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
- .panel = {
- .timing = {
- .left_margin = 16,
- .right_margin = 16,
- .upper_margin = 2,
- .lower_margin = 28,
- .hsync_len = 2,
- .vsync_len = 1,
- .xres = 480,
- .yres = 800,
- .refresh = 55,
- },
- },
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
- VIDCON0_CLKSEL_LCD,
- .vidcon1 = VIDCON1_INV_VCLK | VIDCON1_INV_VDEN
- | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
- .default_win = 3,
- .bpp = 32,
-};
-#else
-/* Frame Buffer */
-static struct s3c_fb_pd_win universal_fb_win0 = {
- .max_bpp = 32,
- .default_bpp = 16,
- .xres = 480,
- .yres = 800,
- .virtual_x = 480,
- .virtual_y = 2 * 800,
-};
-
-static struct fb_videomode universal_lcd_timing = {
- .left_margin = 16,
- .right_margin = 16,
- .upper_margin = 2,
- .lower_margin = 28,
- .hsync_len = 2,
- .vsync_len = 1,
- .xres = 480,
- .yres = 800,
- .refresh = 55,
-};
-
-static struct s3c_fb_platdata universal_lcd_pdata __initdata = {
- .win[0] = &universal_fb_win0,
- .vtiming = &universal_lcd_timing,
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
- VIDCON0_CLKSEL_LCD,
- .vidcon1 = VIDCON1_INV_VCLK | VIDCON1_INV_VDEN
- | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
- .setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
-};
-#endif
-
-static struct regulator_consumer_supply cam_vt_dio_supply =
- REGULATOR_SUPPLY("vdd_core", "0-003c");
-
-static struct regulator_init_data cam_vt_dio_reg_init_data = {
- .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
- .num_consumer_supplies = 1,
- .consumer_supplies = &cam_vt_dio_supply,
-};
-
-static struct fixed_voltage_config cam_vt_dio_fixed_voltage_cfg = {
- .supply_name = "CAM_VT_D_IO",
- .microvolts = 2800000,
- .gpio = EXYNOS4_GPE2(1), /* CAM_PWR_EN2 */
- .enable_high = 1,
- .init_data = &cam_vt_dio_reg_init_data,
-};
-
-static struct platform_device cam_vt_dio_fixed_reg_dev = {
- .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_VT_DIO,
- .dev = { .platform_data = &cam_vt_dio_fixed_voltage_cfg },
-};
-
-static struct regulator_consumer_supply cam_i_core_supply =
- REGULATOR_SUPPLY("core", "0-001f");
-
-static struct regulator_init_data cam_i_core_reg_init_data = {
- .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
- .num_consumer_supplies = 1,
- .consumer_supplies = &cam_i_core_supply,
-};
-
-static struct fixed_voltage_config cam_i_core_fixed_voltage_cfg = {
- .supply_name = "CAM_I_CORE_1.2V",
- .microvolts = 1200000,
- .gpio = EXYNOS4_GPE2(2), /* CAM_8M_CORE_EN */
- .enable_high = 1,
- .init_data = &cam_i_core_reg_init_data,
-};
-
-static struct platform_device cam_i_core_fixed_reg_dev = {
- .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_I_CORE,
- .dev = { .platform_data = &cam_i_core_fixed_voltage_cfg },
-};
-
-static struct regulator_consumer_supply cam_s_if_supply =
- REGULATOR_SUPPLY("d_sensor", "0-001f");
-
-static struct regulator_init_data cam_s_if_reg_init_data = {
- .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
- .num_consumer_supplies = 1,
- .consumer_supplies = &cam_s_if_supply,
-};
-
-static struct fixed_voltage_config cam_s_if_fixed_voltage_cfg = {
- .supply_name = "CAM_S_IF_1.8V",
- .microvolts = 1800000,
- .gpio = EXYNOS4_GPE3(0), /* CAM_PWR_EN1 */
- .enable_high = 1,
- .init_data = &cam_s_if_reg_init_data,
-};
-
-static struct platform_device cam_s_if_fixed_reg_dev = {
- .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_S_IF,
- .dev = { .platform_data = &cam_s_if_fixed_voltage_cfg },
-};
-
-static struct s5p_platform_mipi_csis mipi_csis_platdata = {
- .clk_rate = 166000000UL,
- .lanes = 2,
- .hs_settle = 12,
-};
-
-#define GPIO_CAM_LEVEL_EN(n) EXYNOS4_GPE4(n + 3)
-#define GPIO_CAM_8M_ISP_INT EXYNOS4_GPX1(5) /* XEINT_13 */
-#define GPIO_CAM_MEGA_nRST EXYNOS4_GPE2(5)
-#define GPIO_CAM_VGA_NRST EXYNOS4_GPE4(7)
-#define GPIO_CAM_VGA_NSTBY EXYNOS4_GPE4(6)
-
-static int s5k6aa_set_power(int on)
-{
- gpio_set_value(GPIO_CAM_LEVEL_EN(2), !!on);
- return 0;
-}
-
-static struct s5k6aa_platform_data s5k6aa_platdata = {
- .mclk_frequency = 21600000UL,
- .gpio_reset = { GPIO_CAM_VGA_NRST, 0 },
- .gpio_stby = { GPIO_CAM_VGA_NSTBY, 0 },
- .bus_type = V4L2_MBUS_PARALLEL,
- .horiz_flip = 1,
- .set_power = s5k6aa_set_power,
-};
-
-static struct i2c_board_info s5k6aa_board_info = {
- I2C_BOARD_INFO("S5K6AA", 0x3C),
- .platform_data = &s5k6aa_platdata,
-};
-
-static int m5mols_set_power(struct device *dev, int on)
-{
- gpio_set_value(GPIO_CAM_LEVEL_EN(1), !on);
- gpio_set_value(GPIO_CAM_LEVEL_EN(2), !!on);
- return 0;
-}
-
-static struct m5mols_platform_data m5mols_platdata = {
- .gpio_reset = GPIO_CAM_MEGA_nRST,
- .reset_polarity = 0,
- .set_power = m5mols_set_power,
-};
-
-static struct i2c_board_info m5mols_board_info = {
- I2C_BOARD_INFO("M5MOLS", 0x1F),
- .platform_data = &m5mols_platdata,
-};
-
-static struct fimc_source_info universal_camera_sensors[] = {
- {
- .mux_id = 0,
- .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
- V4L2_MBUS_VSYNC_ACTIVE_LOW,
- .fimc_bus_type = FIMC_BUS_TYPE_ITU_601,
- .board_info = &s5k6aa_board_info,
- .i2c_bus_num = 0,
- .clk_frequency = 24000000UL,
- }, {
- .mux_id = 0,
- .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
- V4L2_MBUS_VSYNC_ACTIVE_LOW,
- .fimc_bus_type = FIMC_BUS_TYPE_MIPI_CSI2,
- .board_info = &m5mols_board_info,
- .i2c_bus_num = 0,
- .clk_frequency = 24000000UL,
- },
-};
-
-static struct s5p_platform_fimc fimc_md_platdata = {
- .source_info = universal_camera_sensors,
- .num_clients = ARRAY_SIZE(universal_camera_sensors),
-};
-
-static struct gpio universal_camera_gpios[] = {
- { GPIO_CAM_LEVEL_EN(1), GPIOF_OUT_INIT_HIGH, "CAM_LVL_EN1" },
- { GPIO_CAM_LEVEL_EN(2), GPIOF_OUT_INIT_LOW, "CAM_LVL_EN2" },
- { GPIO_CAM_8M_ISP_INT, GPIOF_IN, "8M_ISP_INT" },
- { GPIO_CAM_MEGA_nRST, GPIOF_OUT_INIT_LOW, "CAM_8M_NRST" },
- { GPIO_CAM_VGA_NRST, GPIOF_OUT_INIT_LOW, "CAM_VGA_NRST" },
- { GPIO_CAM_VGA_NSTBY, GPIOF_OUT_INIT_LOW, "CAM_VGA_NSTBY" },
-};
-
-/* USB OTG */
-static struct s3c_hsotg_plat universal_hsotg_pdata;
-
-static void __init universal_camera_init(void)
-{
- s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata),
- &s5p_device_mipi_csis0);
- s3c_set_platdata(&fimc_md_platdata, sizeof(fimc_md_platdata),
- &s5p_device_fimc_md);
-
- if (gpio_request_array(universal_camera_gpios,
- ARRAY_SIZE(universal_camera_gpios))) {
- pr_err("%s: GPIO request failed\n", __func__);
- return;
- }
-
- if (!s3c_gpio_cfgpin(GPIO_CAM_8M_ISP_INT, S3C_GPIO_SFN(0xf)))
- m5mols_board_info.irq = gpio_to_irq(GPIO_CAM_8M_ISP_INT);
- else
- pr_err("Failed to configure 8M_ISP_INT GPIO\n");
-
- /* Free GPIOs controlled directly by the sensor drivers. */
- gpio_free(GPIO_CAM_MEGA_nRST);
- gpio_free(GPIO_CAM_8M_ISP_INT);
- gpio_free(GPIO_CAM_VGA_NRST);
- gpio_free(GPIO_CAM_VGA_NSTBY);
-
- if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A))
- pr_err("Camera port A setup failed\n");
-}
-
-static struct platform_device *universal_devices[] __initdata = {
- /* Samsung Platform Devices */
- &s5p_device_mipi_csis0,
- &s5p_device_fimc0,
- &s5p_device_fimc1,
- &s5p_device_fimc2,
- &s5p_device_fimc3,
- &s5p_device_g2d,
- &mmc0_fixed_voltage,
- &s3c_device_hsmmc0,
- &s3c_device_hsmmc2,
- &s3c_device_hsmmc3,
- &s3c_device_i2c0,
- &s3c_device_i2c3,
- &s3c_device_i2c5,
- &s5p_device_i2c_hdmiphy,
- &hdmi_fixed_voltage,
- &s5p_device_hdmi,
- &s5p_device_sdo,
- &s5p_device_mixer,
-
- /* Universal Devices */
- &i2c_gpio12,
- &universal_gpio_keys,
- &s5p_device_onenand,
- &s5p_device_fimd0,
- &s5p_device_jpeg,
- &s3c_device_usb_hsotg,
- &s5p_device_mfc,
- &s5p_device_mfc_l,
- &s5p_device_mfc_r,
- &cam_vt_dio_fixed_reg_dev,
- &cam_i_core_fixed_reg_dev,
- &cam_s_if_fixed_reg_dev,
- &s5p_device_fimc_md,
-};
-
-static void __init universal_map_io(void)
-{
- exynos_init_io(NULL, 0);
- s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
- exynos_set_timer_source(BIT(2) | BIT(4));
- xxti_f = 0;
- xusbxti_f = 24000000;
-}
-
-static void s5p_tv_setup(void)
-{
- /* direct HPD to HDMI chip */
- gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug");
- s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
- s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
-}
-
-static void __init universal_reserve(void)
-{
- s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
-}
-
-static void __init universal_machine_init(void)
-{
- universal_sdhci_init();
- s5p_tv_setup();
-
- s3c_i2c0_set_platdata(&universal_i2c0_platdata);
- i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
-
- universal_tsp_init();
- s3c_i2c3_set_platdata(NULL);
- i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
-
- s3c_i2c5_set_platdata(NULL);
- s5p_i2c_hdmiphy_set_platdata(NULL);
- i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
-
-#ifdef CONFIG_DRM_EXYNOS
- s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
- exynos4_fimd0_gpio_setup_24bpp();
-#else
- s5p_fimd0_set_platdata(&universal_lcd_pdata);
-#endif
-
- universal_touchkey_init();
- i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs,
- ARRAY_SIZE(i2c_gpio12_devs));
-
- s3c_hsotg_set_platdata(&universal_hsotg_pdata);
- universal_camera_init();
-
- /* Last */
- platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices));
-}
-
-MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
- /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
- .atag_offset = 0x100,
- .smp = smp_ops(exynos_smp_ops),
- .init_irq = exynos4_init_irq,
- .map_io = universal_map_io,
- .init_machine = universal_machine_init,
- .init_late = exynos_init_late,
- .init_time = exynos_init_time,
- .reserve = &universal_reserve,
- .restart = exynos4_restart,
-MACHINE_END
projects / karo-tx-linux.git / commitdiff