[media] rc: img-ir: add philips rc6 decoder module

Add img-ir module for decoding Philips rc6 protocol.

Signed-off-by: Sifan Naeem <sifan.naeem@imgtec.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

diff --git a/drivers/media/rc/img-ir/Kconfig b/drivers/media/rc/img-ir/Kconfig
index b20b3e9b441e522064231b58413965234741d0c8..a896d3c83a1c3bf457cac5f23c2742fb3b1c4677 100644 (file)
--- a/drivers/media/rc/img-ir/Kconfig
+++ b/drivers/media/rc/img-ir/Kconfig
@@ -67,3 +67,11 @@ config IR_IMG_RC5
        help
           Say Y here to enable support for the RC5 protocol in the ImgTec
           infrared decoder block.
+
+config IR_IMG_RC6
+       bool "Philips RC6 protocol support"
+       depends on IR_IMG_HW
+       help
+          Say Y here to enable support for the RC6 protocol in the ImgTec
+          infrared decoder block.
+          Note: This version only supports mode 0.

diff --git a/drivers/media/rc/img-ir/Makefile b/drivers/media/rc/img-ir/Makefile
index 898b1b8086d05ea92732f1d697cc89dcf791c0c6..8e6d458e66ad8537c0e5bc9ad1d445d4f925f047 100644 (file)
--- a/drivers/media/rc/img-ir/Makefile
+++ b/drivers/media/rc/img-ir/Makefile
@@ -7,6 +7,7 @@ img-ir-$(CONFIG_IR_IMG_SONY)    += img-ir-sony.o
 img-ir-$(CONFIG_IR_IMG_SHARP)  += img-ir-sharp.o
 img-ir-$(CONFIG_IR_IMG_SANYO)  += img-ir-sanyo.o
 img-ir-$(CONFIG_IR_IMG_RC5)    += img-ir-rc5.o
+img-ir-$(CONFIG_IR_IMG_RC6)    += img-ir-rc6.o
 img-ir-objs                    := $(img-ir-y)
 
 obj-$(CONFIG_IR_IMG)           += img-ir.o

diff --git a/drivers/media/rc/img-ir/img-ir-hw.c b/drivers/media/rc/img-ir/img-ir-hw.c
index 13f0b1e0e211d12c655133d9bdc82bb96ec0c4ad..7bb71bc9f534d525d48f9fd97a56e2e749685185 100644 (file)
--- a/drivers/media/rc/img-ir/img-ir-hw.c
+++ b/drivers/media/rc/img-ir/img-ir-hw.c
@@ -44,6 +44,9 @@ static struct img_ir_decoder *img_ir_decoders[] = {
 #endif
 #ifdef CONFIG_IR_IMG_RC5
        &img_ir_rc5,
+#endif
+#ifdef CONFIG_IR_IMG_RC6
+       &img_ir_rc6,
 #endif
        NULL
 };

diff --git a/drivers/media/rc/img-ir/img-ir-hw.h b/drivers/media/rc/img-ir/img-ir-hw.h
index b9e799d57d9938420c2697c682397db60c5c9e7b..91a29773166148d657fd295bff7dcfa48f0b505e 100644 (file)
--- a/drivers/media/rc/img-ir/img-ir-hw.h
+++ b/drivers/media/rc/img-ir/img-ir-hw.h
@@ -188,6 +188,7 @@ extern struct img_ir_decoder img_ir_sony;
 extern struct img_ir_decoder img_ir_sharp;
 extern struct img_ir_decoder img_ir_sanyo;
 extern struct img_ir_decoder img_ir_rc5;
+extern struct img_ir_decoder img_ir_rc6;
 
 /**
  * struct img_ir_reg_timings - Reg values for decoder timings at clock rate.

diff --git a/drivers/media/rc/img-ir/img-ir-rc6.c b/drivers/media/rc/img-ir/img-ir-rc6.c
new file mode 100644 (file)
index 0000000..de1e275
--- /dev/null
+++ b/drivers/media/rc/img-ir/img-ir-rc6.c
@@ -0,0 +1,117 @@
+/*
+ * ImgTec IR Decoder setup for Philips RC-6 protocol.
+ *
+ * Copyright 2012-2014 Imagination Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include "img-ir-hw.h"
+
+/* Convert RC6 data to a scancode */
+static int img_ir_rc6_scancode(int len, u64 raw, u64 enabled_protocols,
+                               struct img_ir_scancode_req *request)
+{
+       unsigned int addr, cmd, mode, trl1, trl2;
+
+       /*
+        * Due to a side effect of the decoder handling the double length
+        * Trailer bit, the header information is a bit scrambled, and the
+        * raw data is shifted incorrectly.
+        * This workaround effectively recovers the header bits.
+        *
+        * The Header field should look like this:
+        *
+        * StartBit ModeBit2 ModeBit1 ModeBit0 TrailerBit
+        *
+        * But what we get is:
+        *
+        * ModeBit2 ModeBit1 ModeBit0 TrailerBit1 TrailerBit2
+        *
+        * The start bit is not important to recover the scancode.
+        */
+
+       raw     >>= 27;
+
+       trl1    = (raw >>  17)  & 0x01;
+       trl2    = (raw >>  16)  & 0x01;
+
+       mode    = (raw >>  18)  & 0x07;
+       addr    = (raw >>   8)  & 0xff;
+       cmd     =  raw          & 0xff;
+
+       /*
+        * Due to the above explained irregularity the trailer bits cannot
+        * have the same value.
+        */
+       if (trl1 == trl2)
+               return -EINVAL;
+
+       /* Only mode 0 supported for now */
+       if (mode)
+               return -EINVAL;
+
+       request->protocol = RC_TYPE_RC6_0;
+       request->scancode = addr << 8 | cmd;
+       request->toggle   = trl2;
+       return IMG_IR_SCANCODE;
+}
+
+/* Convert RC6 scancode to RC6 data filter */
+static int img_ir_rc6_filter(const struct rc_scancode_filter *in,
+                                struct img_ir_filter *out, u64 protocols)
+{
+       /* Not supported by the hw. */
+       return -EINVAL;
+}
+
+/*
+ * RC-6 decoder
+ * see http://www.sbprojects.com/knowledge/ir/rc6.php
+ */
+struct img_ir_decoder img_ir_rc6 = {
+       .type           = RC_BIT_RC6_0,
+       .control        = {
+               .bitorien       = 1,
+               .code_type      = IMG_IR_CODETYPE_BIPHASE,
+               .decoden        = 1,
+               .decodinpol     = 1,
+       },
+       /* main timings */
+       .tolerance      = 20,
+       /*
+        * Due to a quirk in the img-ir decoder, default header values do
+        * not work, the values described below were extracted from
+        * successful RTL test cases.
+        */
+       .timings        = {
+               /* leader symbol */
+               .ldr = {
+                       .pulse  = { 650 },
+                       .space  = { 660 },
+               },
+               /* 0 symbol */
+               .s00 = {
+                       .pulse  = { 370 },
+                       .space  = { 370 },
+               },
+               /* 01 symbol */
+               .s01 = {
+                       .pulse  = { 370 },
+                       .space  = { 370 },
+               },
+               /* free time */
+               .ft  = {
+                       .minlen = 21,
+                       .maxlen = 21,
+                       .ft_min = 2666, /* 2.666 ms */
+               },
+       },
+
+       /* scancode logic */
+       .scancode       = img_ir_rc6_scancode,
+       .filter         = img_ir_rc6_filter,
+};