select GENERIC_CLOCKEVENTS
select GENERIC_CMOS_UPDATE if SH_SH03 || SH_DREAMCAST
select GENERIC_STRNCPY_FROM_USER
+ select GENERIC_STRNLEN_USER
help
The SuperH is a RISC processor targeted for use in embedded systems
and consumer electronics; it was also used in the Sega Dreamcast
extern long strncpy_from_user(char *dest, const char __user *src, long count);
+extern __must_check long strlen_user(const char __user *str);
+extern __must_check long strnlen_user(const char __user *str, long n);
+
/* Generic arbitrary sized copy. */
/* Return the number of bytes NOT copied */
__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n);
return __copy_size;
}
-/**
- * strnlen_user: - Get the size of a string in user space.
- * @s: The string to measure.
- * @n: The maximum valid length
- *
- * Context: User context only. This function may sleep.
- *
- * Get the size of a NUL-terminated string in user space.
- *
- * Returns the size of the string INCLUDING the terminating NUL.
- * On exception, returns 0.
- * If the string is too long, returns a value greater than @n.
- */
-static inline long strnlen_user(const char __user *s, long n)
-{
- if (!__addr_ok(s))
- return 0;
- else
- return __strnlen_user(s, n);
-}
-
-/**
- * strlen_user: - Get the size of a string in user space.
- * @str: The string to measure.
- *
- * Context: User context only. This function may sleep.
- *
- * Get the size of a NUL-terminated string in user space.
- *
- * Returns the size of the string INCLUDING the terminating NUL.
- * On exception, returns 0.
- *
- * If there is a limit on the length of a valid string, you may wish to
- * consider using strnlen_user() instead.
- */
-#define strlen_user(str) strnlen_user(str, ~0UL >> 1)
-
/*
* The exception table consists of pairs of addresses: the first is the
* address of an instruction that is allowed to fault, and the second is
extern void __put_user_unknown(void);
-/*
- * Return the size of a string (including the ending 0 even when we have
- * exceeded the maximum string length).
- */
-static inline long __strnlen_user(const char __user *__s, long __n)
-{
- unsigned long res;
- unsigned long __dummy;
-
- __asm__ __volatile__(
- "1:\t"
- "mov.b @(%0,%3), %1\n\t"
- "cmp/eq %4, %0\n\t"
- "bt/s 2f\n\t"
- " add #1, %0\n\t"
- "tst %1, %1\n\t"
- "bf 1b\n\t"
- "2:\n"
- ".section .fixup,\"ax\"\n"
- "3:\n\t"
- "mov.l 4f, %1\n\t"
- "jmp @%1\n\t"
- " mov #0, %0\n"
- ".balign 4\n"
- "4: .long 2b\n"
- ".previous\n"
- ".section __ex_table,\"a\"\n"
- " .balign 4\n"
- " .long 1b,3b\n"
- ".previous"
- : "=z" (res), "=&r" (__dummy)
- : "0" (0), "r" (__s), "r" (__n)
- : "t");
- return res;
-}
-
#endif /* __ASM_SH_UACCESS_32_H */
extern long __put_user_asm_q(void *, long);
extern void __put_user_unknown(void);
-extern long __strnlen_user(const char *__s, long __n);
-
#endif /* __ASM_SH_UACCESS_64_H */
--- /dev/null
+#ifndef __ASM_SH_WORD_AT_A_TIME_H
+#define __ASM_SH_WORD_AT_A_TIME_H
+
+#ifdef CONFIG_CPU_BIG_ENDIAN
+# include <asm-generic/word-at-a-time.h>
+#else
+/*
+ * Little-endian version cribbed from x86.
+ */
+struct word_at_a_time {
+ const unsigned long one_bits, high_bits;
+};
+
+#define WORD_AT_A_TIME_CONSTANTS { REPEAT_BYTE(0x01), REPEAT_BYTE(0x80) }
+
+/* Carl Chatfield / Jan Achrenius G+ version for 32-bit */
+static inline long count_masked_bytes(long mask)
+{
+ /* (000000 0000ff 00ffff ffffff) -> ( 1 1 2 3 ) */
+ long a = (0x0ff0001+mask) >> 23;
+ /* Fix the 1 for 00 case */
+ return a & mask;
+}
+
+/* Return nonzero if it has a zero */
+static inline unsigned long has_zero(unsigned long a, unsigned long *bits, const struct word_at_a_time *c)
+{
+ unsigned long mask = ((a - c->one_bits) & ~a) & c->high_bits;
+ *bits = mask;
+ return mask;
+}
+
+static inline unsigned long prep_zero_mask(unsigned long a, unsigned long bits, const struct word_at_a_time *c)
+{
+ return bits;
+}
+
+static inline unsigned long create_zero_mask(unsigned long bits)
+{
+ bits = (bits - 1) & ~bits;
+ return bits >> 7;
+}
+
+/* The mask we created is directly usable as a bytemask */
+#define zero_bytemask(mask) (mask)
+
+static inline unsigned long find_zero(unsigned long mask)
+{
+ return count_masked_bytes(mask);
+}
+#endif
+
+#endif
#endif /* CONFIG_MMU */
-/*
- * extern long __strnlen_user(const char *__s, long __n)
- *
- * Inputs:
- * (r2) source address
- * (r3) source size in bytes
- *
- * Ouputs:
- * (r2) -EFAULT (in case of faulting)
- * string length (otherwise)
- */
- .global __strnlen_user
-__strnlen_user:
- pta ___strnlen_user_set_reply, tr0
- pta ___strnlen_user1, tr1
- or ZERO, ZERO, r5 /* r5 = counter */
- movi -(EFAULT), r6 /* r6 = reply, no real fixup */
- or ZERO, ZERO, r7 /* r7 = data, clear top byte of data */
- beq r3, ZERO, tr0
-
-___strnlen_user1:
- ldx.b r2, r5, r7 /* Fault address: only in reading */
- addi r3, -1, r3 /* No real fixup */
- addi r5, 1, r5
- beq r3, ZERO, tr0
- bne r7, ZERO, tr1
-! The line below used to be active. This meant led to a junk byte lying between each pair
-! of entries in the argv & envp structures in memory. Whilst the program saw the right data
-! via the argv and envp arguments to main, it meant the 'flat' representation visible through
-! /proc/$pid/cmdline was corrupt, causing trouble with ps, for example.
-! addi r5, 1, r5 /* Include '\0' */
-
-___strnlen_user_set_reply:
- or r5, ZERO, r6 /* If done, return counter */
-
-___strnlen_user_exit:
- or r6, ZERO, r2
- ptabs LINK, tr0
- blink tr0, ZERO
-
/*
* extern long __get_user_asm_?(void *val, long addr)
*
.long ___copy_user2, ___copy_user_exit
.long ___clear_user1, ___clear_user_exit
#endif
- .long ___strnlen_user1, ___strnlen_user_exit
.long ___get_user_asm_b1, ___get_user_asm_b_exit
.long ___get_user_asm_w1, ___get_user_asm_w_exit
.long ___get_user_asm_l1, ___get_user_asm_l_exit
EXPORT_SYMBOL(__get_user_asm_w);
EXPORT_SYMBOL(__get_user_asm_l);
EXPORT_SYMBOL(__get_user_asm_q);
-EXPORT_SYMBOL(__strnlen_user);
EXPORT_SYMBOL(__clear_user);
EXPORT_SYMBOL(copy_page);
EXPORT_SYMBOL(__copy_user);
projects / karo-tx-linux.git / commitdiff