iio: chemical: atlas-ph-sensor: add ORP feature

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

diff --git a/Documentation/devicetree/bindings/iio/chemical/atlas,orp-sm.txt b/Documentation/devicetree/bindings/iio/chemical/atlas,orp-sm.txt
new file mode 100644 (file)
index 0000000..5d8b687
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/atlas,orp-sm.txt
@@ -0,0 +1,22 @@
+* Atlas Scientific ORP-SM OEM sensor
+
+https://www.atlas-scientific.com/_files/_datasheets/_oem/ORP_oem_datasheet.pdf
+
+Required properties:
+
+  - compatible: must be "atlas,orp-sm"
+  - reg: the I2C address of the sensor
+  - interrupt-parent: should be the phandle for the interrupt controller
+  - interrupts: the sole interrupt generated by the device
+
+  Refer to interrupt-controller/interrupts.txt for generic interrupt client
+  node bindings.
+
+Example:
+
+atlas@66 {
+       compatible = "atlas,orp-sm";
+       reg = <0x66>;
+       interrupt-parent = <&gpio1>;
+       interrupts = <16 2>;
+};

diff --git a/drivers/iio/chemical/Kconfig b/drivers/iio/chemical/Kconfig
index 4bcc025e8c8a5a41c5918bbd86cfb3d668fd7969..cea7f9857a1f7ee920ef6db7eb4aaf8bca32980e 100644 (file)
--- a/drivers/iio/chemical/Kconfig
+++ b/drivers/iio/chemical/Kconfig
@@ -16,6 +16,7 @@ config ATLAS_PH_SENSOR
         Atlas Scientific OEM SM sensors:
            * pH SM sensor
            * EC SM sensor
+           * ORP SM sensor
 
         To compile this driver as module, choose M here: the
         module will be called atlas-ph-sensor.

diff --git a/drivers/iio/chemical/atlas-ph-sensor.c b/drivers/iio/chemical/atlas-ph-sensor.c
index c0a0ebbbd54a09e9752c8703a5f5749b3989dd6e..84fbff32b96d04eb90ba53d11573282e72911bd3 100644 (file)
--- a/drivers/iio/chemical/atlas-ph-sensor.c
+++ b/drivers/iio/chemical/atlas-ph-sensor.c
@@ -66,12 +66,17 @@
 #define ATLAS_REG_TDS_DATA             0x1c
 #define ATLAS_REG_PSS_DATA             0x20
 
+#define ATLAS_REG_ORP_CALIB_STATUS     0x0d
+#define ATLAS_REG_ORP_DATA             0x0e
+
 #define ATLAS_PH_INT_TIME_IN_US                450000
 #define ATLAS_EC_INT_TIME_IN_US                650000
+#define ATLAS_ORP_INT_TIME_IN_US       450000
 
 enum {
        ATLAS_PH_SM,
        ATLAS_EC_SM,
+       ATLAS_ORP_SM,
 };
 
 struct atlas_data {
@@ -159,6 +164,23 @@ static const struct iio_chan_spec atlas_ec_channels[] = {
        },
 };
 
+static const struct iio_chan_spec atlas_orp_channels[] = {
+       {
+               .type = IIO_VOLTAGE,
+               .address = ATLAS_REG_ORP_DATA,
+               .info_mask_separate =
+                       BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+               .scan_index = 0,
+               .scan_type = {
+                       .sign = 's',
+                       .realbits = 32,
+                       .storagebits = 32,
+                       .endianness = IIO_BE,
+               },
+       },
+       IIO_CHAN_SOFT_TIMESTAMP(1),
+};
+
 static int atlas_check_ph_calibration(struct atlas_data *data)
 {
        struct device *dev = &data->client->dev;
@@ -224,6 +246,22 @@ static int atlas_check_ec_calibration(struct atlas_data *data)
        return 0;
 }
 
+static int atlas_check_orp_calibration(struct atlas_data *data)
+{
+       struct device *dev = &data->client->dev;
+       int ret;
+       unsigned int val;
+
+       ret = regmap_read(data->regmap, ATLAS_REG_ORP_CALIB_STATUS, &val);
+       if (ret)
+               return ret;
+
+       if (!val)
+               dev_warn(dev, "device has not been calibrated\n");
+
+       return 0;
+};
+
 struct atlas_device {
        const struct iio_chan_spec *channels;
        int num_channels;
@@ -248,7 +286,13 @@ static struct atlas_device atlas_devices[] = {
                                .calibration = &atlas_check_ec_calibration,
                                .delay = ATLAS_EC_INT_TIME_IN_US,
        },
-
+       [ATLAS_ORP_SM] = {
+                               .channels = atlas_orp_channels,
+                               .num_channels = 2,
+                               .data_reg = ATLAS_REG_ORP_DATA,
+                               .calibration = &atlas_check_orp_calibration,
+                               .delay = ATLAS_ORP_INT_TIME_IN_US,
+       },
 };
 
 static int atlas_set_powermode(struct atlas_data *data, int on)
@@ -386,6 +430,7 @@ static int atlas_read_raw(struct iio_dev *indio_dev,
                case IIO_PH:
                case IIO_CONCENTRATION:
                case IIO_ELECTRICALCONDUCTIVITY:
+               case IIO_VOLTAGE:
                        ret = iio_device_claim_direct_mode(indio_dev);
                        if (ret)
                                return ret;
@@ -422,6 +467,10 @@ static int atlas_read_raw(struct iio_dev *indio_dev,
                        *val = 0; /* 0.000000001 */
                        *val2 = 1000;
                        return IIO_VAL_INT_PLUS_NANO;
+               case IIO_VOLTAGE:
+                       *val = 1; /* 0.1 */
+                       *val2 = 10;
+                       break;
                default:
                        return -EINVAL;
                }
@@ -457,6 +506,7 @@ static const struct iio_info atlas_info = {
 static const struct i2c_device_id atlas_id[] = {
        { "atlas-ph-sm", ATLAS_PH_SM},
        { "atlas-ec-sm", ATLAS_EC_SM},
+       { "atlas-orp-sm", ATLAS_ORP_SM},
        {}
 };
 MODULE_DEVICE_TABLE(i2c, atlas_id);
@@ -464,6 +514,7 @@ MODULE_DEVICE_TABLE(i2c, atlas_id);
 static const struct of_device_id atlas_dt_ids[] = {
        { .compatible = "atlas,ph-sm", .data = (void *)ATLAS_PH_SM, },
        { .compatible = "atlas,ec-sm", .data = (void *)ATLAS_EC_SM, },
+       { .compatible = "atlas,orp-sm", .data = (void *)ATLAS_ORP_SM, },
        { }
 };
 MODULE_DEVICE_TABLE(of, atlas_dt_ids);