MIPS: Alchemy: Touchscreen support on DB1100

Wire up the ADS7846 touchscreen controller on the DB1100.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2879/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

diff --git a/arch/mips/alchemy/devboards/db1000.c b/arch/mips/alchemy/devboards/db1000.c
index 5206d2fbe0c68729d114244053800d936bb4d18a..1b81dbf6b804f1881e9044840bc0b22992ee1a2e 100644 (file)
--- a/arch/mips/alchemy/devboards/db1000.c
+++ b/arch/mips/alchemy/devboards/db1000.c
@@ -28,6 +28,9 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/pm.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/spi/ads7846.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1000_dma.h>
 #include <asm/mach-au1x00/au1100_mmc.h>
@@ -424,6 +427,43 @@ static struct platform_device db1000_irda_dev = {
        .num_resources  = ARRAY_SIZE(au1000_irda_res),
 };
 
+/******************************************************************************/
+
+static struct ads7846_platform_data db1100_touch_pd = {
+       .model          = 7846,
+       .vref_mv        = 3300,
+       .gpio_pendown   = 21,
+};
+
+static struct spi_gpio_platform_data db1100_spictl_pd = {
+       .sck            = 209,
+       .mosi           = 208,
+       .miso           = 207,
+       .num_chipselect = 1,
+};
+
+static struct spi_board_info db1100_spi_info[] __initdata = {
+       [0] = {
+               .modalias        = "ads7846",
+               .max_speed_hz    = 3250000,
+               .bus_num         = 0,
+               .chip_select     = 0,
+               .mode            = 0,
+               .irq             = AU1100_GPIO21_INT,
+               .platform_data   = &db1100_touch_pd,
+               .controller_data = (void *)210, /* for spi_gpio: CS# GPIO210 */
+       },
+};
+
+static struct platform_device db1100_spi_dev = {
+       .name           = "spi_gpio",
+       .id             = 0,
+       .dev            = {
+               .platform_data  = &db1100_spictl_pd,
+       },
+};
+
+
 static struct platform_device *db1x00_devs[] = {
        &db1x00_codec_dev,
        &alchemy_ac97c_dma_dev,
@@ -440,12 +480,14 @@ static struct platform_device *db1100_devs[] = {
        &db1100_mmc0_dev,
        &db1100_mmc1_dev,
        &db1000_irda_dev,
+       &db1100_spi_dev,
 };
 
 static int __init db1000_dev_init(void)
 {
        int board = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI));
        int c0, c1, d0, d1, s0, s1;
+       unsigned long pfc;
 
        if (board == BCSR_WHOAMI_DB1500) {
                c0 = AU1500_GPIO2_INT;
@@ -464,6 +506,20 @@ static int __init db1000_dev_init(void)
 
                gpio_direction_input(19);       /* sd0 cd# */
                gpio_direction_input(20);       /* sd1 cd# */
+               gpio_direction_input(21);       /* touch pendown# */
+               gpio_direction_input(207);      /* SPI MISO */
+               gpio_direction_output(208, 0);  /* SPI MOSI */
+               gpio_direction_output(209, 1);  /* SPI SCK */
+               gpio_direction_output(210, 1);  /* SPI CS# */
+
+               /* spi_gpio on SSI0 pins */
+               pfc = __raw_readl((void __iomem *)SYS_PINFUNC);
+               pfc |= (1 << 0);        /* SSI0 pins as GPIOs */
+               __raw_writel(pfc, (void __iomem *)SYS_PINFUNC);
+               wmb();
+
+               spi_register_board_info(db1100_spi_info,
+                                       ARRAY_SIZE(db1100_spi_info));
 
                platform_add_devices(db1100_devs, ARRAY_SIZE(db1100_devs));
        } else if (board == BCSR_WHOAMI_DB1000) {