!Iinclude/linux/device.h
</sect1>
<sect1><title>Device Drivers Base</title>
+!Idrivers/base/init.c
!Edrivers/base/driver.c
!Edrivers/base/core.c
+!Edrivers/base/syscore.c
!Edrivers/base/class.c
+!Idrivers/base/node.c
!Edrivers/base/firmware_class.c
!Edrivers/base/transport_class.c
<!-- Cannot be included, because
exceed allowed 44 characters maximum
X!Edrivers/base/attribute_container.c
-->
-!Edrivers/base/sys.c
+!Edrivers/base/dd.c
<!--
X!Edrivers/base/interface.c
-->
!Iinclude/linux/platform_device.h
!Edrivers/base/platform.c
!Edrivers/base/bus.c
+ </sect1>
+ <sect1><title>Device Drivers DMA Management</title>
+!Edrivers/base/dma-buf.c
+!Edrivers/base/dma-coherent.c
+!Edrivers/base/dma-mapping.c
</sect1>
<sect1><title>Device Drivers Power Management</title>
!Edrivers/base/power/main.c
<chapter id="uart16x50">
<title>16x50 UART Driver</title>
!Edrivers/tty/serial/serial_core.c
-!Edrivers/tty/serial/8250.c
+!Edrivers/tty/serial/8250/8250.c
</chapter>
<chapter id="fbdev">
class/input/event*/device/capabilities/, and the properties of a device are
provided in class/input/event*/device/properties.
-Types:
-==========
-Types are groupings of codes under a logical input construct. Each type has a
-set of applicable codes to be used in generating events. See the Codes section
-for details on valid codes for each type.
+Event types:
+===========
+Event types are groupings of codes under a logical input construct. Each
+type has a set of applicable codes to be used in generating events. See the
+Codes section for details on valid codes for each type.
* EV_SYN:
- Used as markers to separate events. Events may be separated in time or in
* EV_FF_STATUS:
- Used to receive force feedback device status.
-Codes:
-==========
-Codes define the precise type of event.
+Event codes:
+===========
+Event codes define the precise type of event.
EV_SYN:
----------
EV_PWR events are a special type of event used specifically for power
mangement. Its usage is not well defined. To be addressed later.
+Device properties:
+=================
+Normally, userspace sets up an input device based on the data it emits,
+i.e., the event types. In the case of two devices emitting the same event
+types, additional information can be provided in the form of device
+properties.
+
+INPUT_PROP_DIRECT + INPUT_PROP_POINTER:
+--------------------------------------
+The INPUT_PROP_DIRECT property indicates that device coordinates should be
+directly mapped to screen coordinates (not taking into account trivial
+transformations, such as scaling, flipping and rotating). Non-direct input
+devices require non-trivial transformation, such as absolute to relative
+transformation for touchpads. Typical direct input devices: touchscreens,
+drawing tablets; non-direct devices: touchpads, mice.
+
+The INPUT_PROP_POINTER property indicates that the device is not transposed
+on the screen and thus requires use of an on-screen pointer to trace user's
+movements. Typical pointer devices: touchpads, tablets, mice; non-pointer
+device: touchscreen.
+
+If neither INPUT_PROP_DIRECT or INPUT_PROP_POINTER are set, the property is
+considered undefined and the device type should be deduced in the
+traditional way, using emitted event types.
+
+INPUT_PROP_BUTTONPAD:
+--------------------
+For touchpads where the button is placed beneath the surface, such that
+pressing down on the pad causes a button click, this property should be
+set. Common in clickpad notebooks and macbooks from 2009 and onwards.
+
+Originally, the buttonpad property was coded into the bcm5974 driver
+version field under the name integrated button. For backwards
+compatibility, both methods need to be checked in userspace.
+
+INPUT_PROP_SEMI_MT:
+------------------
+Some touchpads, most common between 2008 and 2011, can detect the presence
+of multiple contacts without resolving the individual positions; only the
+number of contacts and a rectangular shape is known. For such
+touchpads, the semi-mt property should be set.
+
+Depending on the device, the rectangle may enclose all touches, like a
+bounding box, or just some of them, for instance the two most recent
+touches. The diversity makes the rectangle of limited use, but some
+gestures can normally be extracted from it.
+
+If INPUT_PROP_SEMI_MT is not set, the device is assumed to be a true MT
+device.
+
Guidelines:
==========
The guidelines below ensure proper single-touch and multi-finger functionality.
BTN_{MOUSE,LEFT,MIDDLE,RIGHT} must not be reported as the result of touch
contact. BTN_TOOL_<name> events should be reported where possible.
+For new hardware, INPUT_PROP_DIRECT should be set.
+
Trackpads:
----------
Legacy trackpads that only provide relative position information must report
on the trackpad. Where multi-finger support is available, BTN_TOOL_<name> should
be used to report the number of touches active on the trackpad.
+For new hardware, INPUT_PROP_POINTER should be set.
+
Tablets:
----------
BTN_TOOL_<name> events must be reported when a stylus or other tool is active on
BTN_{0,1,2,etc} are good generic codes for unlabeled buttons. Do not use
meaningful buttons, like BTN_FORWARD, unless the button is labeled for that
purpose on the device.
+
+For new hardware, both INPUT_PROP_DIRECT and INPUT_PROP_POINTER should be set.
instead of using the one provided by the hardware.
512 - A kernel warning has occurred.
1024 - A module from drivers/staging was loaded.
+2048 - The system is working around a severe firmware bug.
+4096 - An out-of-tree module has been loaded.
==============================================================
F: drivers/net/ethernet/realtek/r8169.c
8250/16?50 (AND CLONE UARTS) SERIAL DRIVER
-M: Greg Kroah-Hartman <gregkh@suse.de>
+M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
L: linux-serial@vger.kernel.org
W: http://serial.sourceforge.net
S: Maintained
F: arch/arm/mach-imx/
F: arch/arm/plat-mxc/
-ARM/FREESCALE IMX51
-M: Amit Kucheria <amit.kucheria@canonical.com>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-F: arch/arm/mach-mx5/
-
ARM/FREESCALE IMX6
M: Shawn Guo <shawn.guo@linaro.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
CHAR and MISC DRIVERS
M: Arnd Bergmann <arnd@arndb.de>
-M: Greg Kroah-Hartman <greg@kroah.com>
+M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
-S: Maintained
+S: Supported
F: drivers/char/*
F: drivers/misc/*
DOCUMENTATION
M: Randy Dunlap <rdunlap@xenotime.net>
L: linux-doc@vger.kernel.org
-T: quilt http://userweb.kernel.org/~rdunlap/kernel-doc-patches/current/
+T: quilt http://xenotime.net/kernel-doc-patches/current/
S: Maintained
F: Documentation/
F: Documentation/blockdev/drbd/
DRIVER CORE, KOBJECTS, DEBUGFS AND SYSFS
-M: Greg Kroah-Hartman <gregkh@suse.de>
+M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6.git
S: Supported
F: Documentation/kobject.txt
L: lguest@lists.ozlabs.org
W: http://lguest.ozlabs.org/
S: Odd Fixes
-F: Documentation/virtual/lguest/
+F: arch/x86/include/asm/lguest*.h
F: arch/x86/lguest/
F: drivers/lguest/
F: include/linux/lguest*.h
-F: arch/x86/include/asm/lguest*.h
+F: tools/lguest/
LINUX FOR IBM pSERIES (RS/6000)
M: Paul Mackerras <paulus@au.ibm.com>
W: http://www.linux-ntfs.org/content/view/19/37/
S: Maintained
F: Documentation/ldm.txt
-F: fs/partitions/ldm.*
+F: block/partitions/ldm.*
LogFS
M: Joern Engel <joern@logfs.org>
S: Supported
F: arch/s390/
F: drivers/s390/
-F: fs/partitions/ibm.c
+F: block/partitions/ibm.c
F: Documentation/s390/
F: Documentation/DocBook/s390*
F: arch/alpha/kernel/srm_env.c
STABLE BRANCH
-M: Greg Kroah-Hartman <greg@kroah.com>
+M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
L: stable@vger.kernel.org
-S: Maintained
+S: Supported
STAGING SUBSYSTEM
-M: Greg Kroah-Hartman <gregkh@suse.de>
+M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
L: devel@driverdev.osuosl.org
-S: Maintained
+S: Supported
F: drivers/staging/
STAGING - AGERE HERMES II and II.5 WIRELESS DRIVERS
S: Odd Fixes
F: drivers/staging/tidspbridge/
-STAGING - TRIDENT TVMASTER TMxxxx USB VIDEO CAPTURE DRIVERS
-L: linux-media@vger.kernel.org
-S: Odd Fixes
-F: drivers/staging/tm6000/
-
STAGING - USB ENE SM/MS CARD READER DRIVER
M: Al Cho <acho@novell.com>
S: Odd Fixes
K: ^Subject:.*(?i)trivial
TTY LAYER
-M: Greg Kroah-Hartman <gregkh@suse.de>
-S: Maintained
+M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+S: Supported
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6.git
F: drivers/tty/
F: drivers/tty/serial/serial_core.c
F: drivers/usb/serial/digi_acceleport.c
USB SERIAL DRIVER
-M: Greg Kroah-Hartman <gregkh@suse.de>
+M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
L: linux-usb@vger.kernel.org
S: Supported
F: Documentation/usb/usb-serial.txt
F: drivers/usb/serial/empeg.c
USB SERIAL KEYSPAN DRIVER
-M: Greg Kroah-Hartman <greg@kroah.com>
+M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
L: linux-usb@vger.kernel.org
-W: http://www.kroah.com/linux/
S: Maintained
F: drivers/usb/serial/*keyspan*
F: drivers/media/video/sn9c102/
USB SUBSYSTEM
-M: Greg Kroah-Hartman <gregkh@suse.de>
+M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
L: linux-usb@vger.kernel.org
W: http://www.linux-usb.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6.git
USERSPACE I/O (UIO)
M: "Hans J. Koch" <hjk@hansjkoch.de>
-M: Greg Kroah-Hartman <gregkh@suse.de>
+M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
S: Maintained
F: Documentation/DocBook/uio-howto.tmpl
F: drivers/uio/
VERSION = 3
PATCHLEVEL = 3
SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_CFI_I2 is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_PHYSMAP=y
unsigned long addr)
{
pgtable_page_dtor(pte);
- tlb_add_flush(tlb, addr);
+
+ /*
+ * With the classic ARM MMU, a pte page has two corresponding pmd
+ * entries, each covering 1MB.
+ */
+ addr &= PMD_MASK;
+ tlb_add_flush(tlb, addr + SZ_1M - PAGE_SIZE);
+ tlb_add_flush(tlb, addr + SZ_1M);
+
tlb_remove_page(tlb, pte);
}
smp_dmb arm
rsbs r0, r3, #0 @ set returned val and C flag
ldmfd sp!, {r4, r5, r6, r7}
- bx lr
+ usr_ret lr
#elif !defined(CONFIG_SMP)
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
+ [C(NODE)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
};
/*
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
+ [C(NODE)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
};
/*
{
int ret;
struct thread_info *thread = task_thread_info(target);
- struct vfp_hard_struct new_vfp = thread->vfpstate.hard;
+ struct vfp_hard_struct new_vfp;
const size_t user_fpregs_offset = offsetof(struct user_vfp, fpregs);
const size_t user_fpscr_offset = offsetof(struct user_vfp, fpscr);
+ vfp_sync_hwstate(thread);
+ new_vfp = thread->vfpstate.hard;
+
ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
&new_vfp.fpregs,
user_fpregs_offset,
if (ret)
return ret;
- vfp_sync_hwstate(thread);
- thread->vfpstate.hard = new_vfp;
vfp_flush_hwstate(thread);
+ thread->vfpstate.hard = new_vfp;
return 0;
}
if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE)
return -EINVAL;
+ vfp_flush_hwstate(thread);
+
/*
* Copy the floating point registers. There can be unused
* registers see asm/hwcap.h for details.
__get_user_error(h->fpinst, &frame->ufp_exc.fpinst, err);
__get_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err);
- if (!err)
- vfp_flush_hwstate(thread);
-
return err ? -EFAULT : 0;
}
.init_early = bcmring_init_early,
.init_irq = bcmring_init_irq,
.timer = &bcmring_timer,
- .init_machine = bcmring_init_machine
+ .init_machine = bcmring_init_machine,
.restart = bcmring_restart,
MACHINE_END
#include <mach/timer.h>
-#include <linux/mm.h>
#include <linux/pfn.h>
#include <linux/atomic.h>
#include <linux/sched.h>
#include <mach/dma.h>
-/* I don't quite understand why dc4 fails when this is set to 1 and DMA is enabled */
-/* especially since dc4 doesn't use kmalloc'd memory. */
-
-#define ALLOW_MAP_OF_KMALLOC_MEMORY 0
-
/* ---- Public Variables ------------------------------------------------- */
/* ---- Private Constants and Types -------------------------------------- */
#define CONTROLLER_FROM_HANDLE(handle) (((handle) >> 4) & 0x0f)
#define CHANNEL_FROM_HANDLE(handle) ((handle) & 0x0f)
-#define DMA_MAP_DEBUG 0
-
-#if DMA_MAP_DEBUG
-# define DMA_MAP_PRINT(fmt, args...) printk("%s: " fmt, __func__, ## args)
-#else
-# define DMA_MAP_PRINT(fmt, args...)
-#endif
/* ---- Private Variables ------------------------------------------------ */
static DMA_Global_t gDMA;
static struct proc_dir_entry *gDmaDir;
-static atomic_t gDmaStatMemTypeKmalloc = ATOMIC_INIT(0);
-static atomic_t gDmaStatMemTypeVmalloc = ATOMIC_INIT(0);
-static atomic_t gDmaStatMemTypeUser = ATOMIC_INIT(0);
-static atomic_t gDmaStatMemTypeCoherent = ATOMIC_INIT(0);
-
#include "dma_device.c"
/* ---- Private Function Prototypes -------------------------------------- */
/* ---- Functions ------------------------------------------------------- */
-/****************************************************************************/
-/**
-* Displays information for /proc/dma/mem-type
-*/
-/****************************************************************************/
-
-static int dma_proc_read_mem_type(char *buf, char **start, off_t offset,
- int count, int *eof, void *data)
-{
- int len = 0;
-
- len += sprintf(buf + len, "dma_map_mem statistics\n");
- len +=
- sprintf(buf + len, "coherent: %d\n",
- atomic_read(&gDmaStatMemTypeCoherent));
- len +=
- sprintf(buf + len, "kmalloc: %d\n",
- atomic_read(&gDmaStatMemTypeKmalloc));
- len +=
- sprintf(buf + len, "vmalloc: %d\n",
- atomic_read(&gDmaStatMemTypeVmalloc));
- len +=
- sprintf(buf + len, "user: %d\n",
- atomic_read(&gDmaStatMemTypeUser));
-
- return len;
-}
-
/****************************************************************************/
/**
* Displays information for /proc/dma/channels
dma_proc_read_channels, NULL);
create_proc_read_entry("devices", 0, gDmaDir,
dma_proc_read_devices, NULL);
- create_proc_read_entry("mem-type", 0, gDmaDir,
- dma_proc_read_mem_type, NULL);
}
out:
}
EXPORT_SYMBOL(dma_set_device_handler);
-
-/****************************************************************************/
-/**
-* Initializes a memory mapping structure
-*/
-/****************************************************************************/
-
-int dma_init_mem_map(DMA_MemMap_t *memMap)
-{
- memset(memMap, 0, sizeof(*memMap));
-
- sema_init(&memMap->lock, 1);
-
- return 0;
-}
-
-EXPORT_SYMBOL(dma_init_mem_map);
-
-/****************************************************************************/
-/**
-* Releases any memory currently being held by a memory mapping structure.
-*/
-/****************************************************************************/
-
-int dma_term_mem_map(DMA_MemMap_t *memMap)
-{
- down(&memMap->lock); /* Just being paranoid */
-
- /* Free up any allocated memory */
-
- up(&memMap->lock);
- memset(memMap, 0, sizeof(*memMap));
-
- return 0;
-}
-
-EXPORT_SYMBOL(dma_term_mem_map);
-
-/****************************************************************************/
-/**
-* Looks at a memory address and categorizes it.
-*
-* @return One of the values from the DMA_MemType_t enumeration.
-*/
-/****************************************************************************/
-
-DMA_MemType_t dma_mem_type(void *addr)
-{
- unsigned long addrVal = (unsigned long)addr;
-
- if (addrVal >= CONSISTENT_BASE) {
- /* NOTE: DMA virtual memory space starts at 0xFFxxxxxx */
-
- /* dma_alloc_xxx pages are physically and virtually contiguous */
-
- return DMA_MEM_TYPE_DMA;
- }
-
- /* Technically, we could add one more classification. Addresses between VMALLOC_END */
- /* and the beginning of the DMA virtual address could be considered to be I/O space. */
- /* Right now, nobody cares about this particular classification, so we ignore it. */
-
- if (is_vmalloc_addr(addr)) {
- /* Address comes from the vmalloc'd region. Pages are virtually */
- /* contiguous but NOT physically contiguous */
-
- return DMA_MEM_TYPE_VMALLOC;
- }
-
- if (addrVal >= PAGE_OFFSET) {
- /* PAGE_OFFSET is typically 0xC0000000 */
-
- /* kmalloc'd pages are physically contiguous */
-
- return DMA_MEM_TYPE_KMALLOC;
- }
-
- return DMA_MEM_TYPE_USER;
-}
-
-EXPORT_SYMBOL(dma_mem_type);
-
-/****************************************************************************/
-/**
-* Looks at a memory address and determines if we support DMA'ing to/from
-* that type of memory.
-*
-* @return boolean -
-* return value != 0 means dma supported
-* return value == 0 means dma not supported
-*/
-/****************************************************************************/
-
-int dma_mem_supports_dma(void *addr)
-{
- DMA_MemType_t memType = dma_mem_type(addr);
-
- return (memType == DMA_MEM_TYPE_DMA)
-#if ALLOW_MAP_OF_KMALLOC_MEMORY
- || (memType == DMA_MEM_TYPE_KMALLOC)
-#endif
- || (memType == DMA_MEM_TYPE_USER);
-}
-
-EXPORT_SYMBOL(dma_mem_supports_dma);
-
-/****************************************************************************/
-/**
-* Maps in a memory region such that it can be used for performing a DMA.
-*
-* @return
-*/
-/****************************************************************************/
-
-int dma_map_start(DMA_MemMap_t *memMap, /* Stores state information about the map */
- enum dma_data_direction dir /* Direction that the mapping will be going */
- ) {
- int rc;
-
- down(&memMap->lock);
-
- DMA_MAP_PRINT("memMap: %p\n", memMap);
-
- if (memMap->inUse) {
- printk(KERN_ERR "%s: memory map %p is already being used\n",
- __func__, memMap);
- rc = -EBUSY;
- goto out;
- }
-
- memMap->inUse = 1;
- memMap->dir = dir;
- memMap->numRegionsUsed = 0;
-
- rc = 0;
-
-out:
-
- DMA_MAP_PRINT("returning %d", rc);
-
- up(&memMap->lock);
-
- return rc;
-}
-
-EXPORT_SYMBOL(dma_map_start);
-
-/****************************************************************************/
-/**
-* Adds a segment of memory to a memory map. Each segment is both
-* physically and virtually contiguous.
-*
-* @return 0 on success, error code otherwise.
-*/
-/****************************************************************************/
-
-static int dma_map_add_segment(DMA_MemMap_t *memMap, /* Stores state information about the map */
- DMA_Region_t *region, /* Region that the segment belongs to */
- void *virtAddr, /* Virtual address of the segment being added */
- dma_addr_t physAddr, /* Physical address of the segment being added */
- size_t numBytes /* Number of bytes of the segment being added */
- ) {
- DMA_Segment_t *segment;
-
- DMA_MAP_PRINT("memMap:%p va:%p pa:0x%x #:%d\n", memMap, virtAddr,
- physAddr, numBytes);
-
- /* Sanity check */
-
- if (((unsigned long)virtAddr < (unsigned long)region->virtAddr)
- || (((unsigned long)virtAddr + numBytes)) >
- ((unsigned long)region->virtAddr + region->numBytes)) {
- printk(KERN_ERR
- "%s: virtAddr %p is outside region @ %p len: %d\n",
- __func__, virtAddr, region->virtAddr, region->numBytes);
- return -EINVAL;
- }
-
- if (region->numSegmentsUsed > 0) {
- /* Check to see if this segment is physically contiguous with the previous one */
-
- segment = ®ion->segment[region->numSegmentsUsed - 1];
-
- if ((segment->physAddr + segment->numBytes) == physAddr) {
- /* It is - just add on to the end */
-
- DMA_MAP_PRINT("appending %d bytes to last segment\n",
- numBytes);
-
- segment->numBytes += numBytes;
-
- return 0;
- }
- }
-
- /* Reallocate to hold more segments, if required. */
-
- if (region->numSegmentsUsed >= region->numSegmentsAllocated) {
- DMA_Segment_t *newSegment;
- size_t oldSize =
- region->numSegmentsAllocated * sizeof(*newSegment);
- int newAlloc = region->numSegmentsAllocated + 4;
- size_t newSize = newAlloc * sizeof(*newSegment);
-
- newSegment = kmalloc(newSize, GFP_KERNEL);
- if (newSegment == NULL) {
- return -ENOMEM;
- }
- memcpy(newSegment, region->segment, oldSize);
- memset(&((uint8_t *) newSegment)[oldSize], 0,
- newSize - oldSize);
- kfree(region->segment);
-
- region->numSegmentsAllocated = newAlloc;
- region->segment = newSegment;
- }
-
- segment = ®ion->segment[region->numSegmentsUsed];
- region->numSegmentsUsed++;
-
- segment->virtAddr = virtAddr;
- segment->physAddr = physAddr;
- segment->numBytes = numBytes;
-
- DMA_MAP_PRINT("returning success\n");
-
- return 0;
-}
-
-/****************************************************************************/
-/**
-* Adds a region of memory to a memory map. Each region is virtually
-* contiguous, but not necessarily physically contiguous.
-*
-* @return 0 on success, error code otherwise.
-*/
-/****************************************************************************/
-
-int dma_map_add_region(DMA_MemMap_t *memMap, /* Stores state information about the map */
- void *mem, /* Virtual address that we want to get a map of */
- size_t numBytes /* Number of bytes being mapped */
- ) {
- unsigned long addr = (unsigned long)mem;
- unsigned int offset;
- int rc = 0;
- DMA_Region_t *region;
- dma_addr_t physAddr;
-
- down(&memMap->lock);
-
- DMA_MAP_PRINT("memMap:%p va:%p #:%d\n", memMap, mem, numBytes);
-
- if (!memMap->inUse) {
- printk(KERN_ERR "%s: Make sure you call dma_map_start first\n",
- __func__);
- rc = -EINVAL;
- goto out;
- }
-
- /* Reallocate to hold more regions. */
-
- if (memMap->numRegionsUsed >= memMap->numRegionsAllocated) {
- DMA_Region_t *newRegion;
- size_t oldSize =
- memMap->numRegionsAllocated * sizeof(*newRegion);
- int newAlloc = memMap->numRegionsAllocated + 4;
- size_t newSize = newAlloc * sizeof(*newRegion);
-
- newRegion = kmalloc(newSize, GFP_KERNEL);
- if (newRegion == NULL) {
- rc = -ENOMEM;
- goto out;
- }
- memcpy(newRegion, memMap->region, oldSize);
- memset(&((uint8_t *) newRegion)[oldSize], 0, newSize - oldSize);
-
- kfree(memMap->region);
-
- memMap->numRegionsAllocated = newAlloc;
- memMap->region = newRegion;
- }
-
- region = &memMap->region[memMap->numRegionsUsed];
- memMap->numRegionsUsed++;
-
- offset = addr & ~PAGE_MASK;
-
- region->memType = dma_mem_type(mem);
- region->virtAddr = mem;
- region->numBytes = numBytes;
- region->numSegmentsUsed = 0;
- region->numLockedPages = 0;
- region->lockedPages = NULL;
-
- switch (region->memType) {
- case DMA_MEM_TYPE_VMALLOC:
- {
- atomic_inc(&gDmaStatMemTypeVmalloc);
-
- /* printk(KERN_ERR "%s: vmalloc'd pages are not supported\n", __func__); */
-
- /* vmalloc'd pages are not physically contiguous */
-
- rc = -EINVAL;
- break;
- }
-
- case DMA_MEM_TYPE_KMALLOC:
- {
- atomic_inc(&gDmaStatMemTypeKmalloc);
-
- /* kmalloc'd pages are physically contiguous, so they'll have exactly */
- /* one segment */
-
-#if ALLOW_MAP_OF_KMALLOC_MEMORY
- physAddr =
- dma_map_single(NULL, mem, numBytes, memMap->dir);
- rc = dma_map_add_segment(memMap, region, mem, physAddr,
- numBytes);
-#else
- rc = -EINVAL;
-#endif
- break;
- }
-
- case DMA_MEM_TYPE_DMA:
- {
- /* dma_alloc_xxx pages are physically contiguous */
-
- atomic_inc(&gDmaStatMemTypeCoherent);
-
- physAddr = (vmalloc_to_pfn(mem) << PAGE_SHIFT) + offset;
-
- dma_sync_single_for_cpu(NULL, physAddr, numBytes,
- memMap->dir);
- rc = dma_map_add_segment(memMap, region, mem, physAddr,
- numBytes);
- break;
- }
-
- case DMA_MEM_TYPE_USER:
- {
- size_t firstPageOffset;
- size_t firstPageSize;
- struct page **pages;
- struct task_struct *userTask;
-
- atomic_inc(&gDmaStatMemTypeUser);
-
-#if 1
- /* If the pages are user pages, then the dma_mem_map_set_user_task function */
- /* must have been previously called. */
-
- if (memMap->userTask == NULL) {
- printk(KERN_ERR
- "%s: must call dma_mem_map_set_user_task when using user-mode memory\n",
- __func__);
- return -EINVAL;
- }
-
- /* User pages need to be locked. */
-
- firstPageOffset =
- (unsigned long)region->virtAddr & (PAGE_SIZE - 1);
- firstPageSize = PAGE_SIZE - firstPageOffset;
-
- region->numLockedPages = (firstPageOffset
- + region->numBytes +
- PAGE_SIZE - 1) / PAGE_SIZE;
- pages =
- kmalloc(region->numLockedPages *
- sizeof(struct page *), GFP_KERNEL);
-
- if (pages == NULL) {
- region->numLockedPages = 0;
- return -ENOMEM;
- }
-
- userTask = memMap->userTask;
-
- down_read(&userTask->mm->mmap_sem);
- rc = get_user_pages(userTask, /* task */
- userTask->mm, /* mm */
- (unsigned long)region->virtAddr, /* start */
- region->numLockedPages, /* len */
- memMap->dir == DMA_FROM_DEVICE, /* write */
- 0, /* force */
- pages, /* pages (array of pointers to page) */
- NULL); /* vmas */
- up_read(&userTask->mm->mmap_sem);
-
- if (rc != region->numLockedPages) {
- kfree(pages);
- region->numLockedPages = 0;
-
- if (rc >= 0) {
- rc = -EINVAL;
- }
- } else {
- uint8_t *virtAddr = region->virtAddr;
- size_t bytesRemaining;
- int pageIdx;
-
- rc = 0; /* Since get_user_pages returns +ve number */
-
- region->lockedPages = pages;
-
- /* We've locked the user pages. Now we need to walk them and figure */
- /* out the physical addresses. */
-
- /* The first page may be partial */
-
- dma_map_add_segment(memMap,
- region,
- virtAddr,
- PFN_PHYS(page_to_pfn
- (pages[0])) +
- firstPageOffset,
- firstPageSize);
-
- virtAddr += firstPageSize;
- bytesRemaining =
- region->numBytes - firstPageSize;
-
- for (pageIdx = 1;
- pageIdx < region->numLockedPages;
- pageIdx++) {
- size_t bytesThisPage =
- (bytesRemaining >
- PAGE_SIZE ? PAGE_SIZE :
- bytesRemaining);
-
- DMA_MAP_PRINT
- ("pageIdx:%d pages[pageIdx]=%p pfn=%u phys=%u\n",
- pageIdx, pages[pageIdx],
- page_to_pfn(pages[pageIdx]),
- PFN_PHYS(page_to_pfn
- (pages[pageIdx])));
-
- dma_map_add_segment(memMap,
- region,
- virtAddr,
- PFN_PHYS(page_to_pfn
- (pages
- [pageIdx])),
- bytesThisPage);
-
- virtAddr += bytesThisPage;
- bytesRemaining -= bytesThisPage;
- }
- }
-#else
- printk(KERN_ERR
- "%s: User mode pages are not yet supported\n",
- __func__);
-
- /* user pages are not physically contiguous */
-
- rc = -EINVAL;
-#endif
- break;
- }
-
- default:
- {
- printk(KERN_ERR "%s: Unsupported memory type: %d\n",
- __func__, region->memType);
-
- rc = -EINVAL;
- break;
- }
- }
-
- if (rc != 0) {
- memMap->numRegionsUsed--;
- }
-
-out:
-
- DMA_MAP_PRINT("returning %d\n", rc);
-
- up(&memMap->lock);
-
- return rc;
-}
-
-EXPORT_SYMBOL(dma_map_add_segment);
-
-/****************************************************************************/
-/**
-* Maps in a memory region such that it can be used for performing a DMA.
-*
-* @return 0 on success, error code otherwise.
-*/
-/****************************************************************************/
-
-int dma_map_mem(DMA_MemMap_t *memMap, /* Stores state information about the map */
- void *mem, /* Virtual address that we want to get a map of */
- size_t numBytes, /* Number of bytes being mapped */
- enum dma_data_direction dir /* Direction that the mapping will be going */
- ) {
- int rc;
-
- rc = dma_map_start(memMap, dir);
- if (rc == 0) {
- rc = dma_map_add_region(memMap, mem, numBytes);
- if (rc < 0) {
- /* Since the add fails, this function will fail, and the caller won't */
- /* call unmap, so we need to do it here. */
-
- dma_unmap(memMap, 0);
- }
- }
-
- return rc;
-}
-
-EXPORT_SYMBOL(dma_map_mem);
-
-/****************************************************************************/
-/**
-* Setup a descriptor ring for a given memory map.
-*
-* It is assumed that the descriptor ring has already been initialized, and
-* this routine will only reallocate a new descriptor ring if the existing
-* one is too small.
-*
-* @return 0 on success, error code otherwise.
-*/
-/****************************************************************************/
-
-int dma_map_create_descriptor_ring(DMA_Device_t dev, /* DMA device (where the ring is stored) */
- DMA_MemMap_t *memMap, /* Memory map that will be used */
- dma_addr_t devPhysAddr /* Physical address of device */
- ) {
- int rc;
- int numDescriptors;
- DMA_DeviceAttribute_t *devAttr;
- DMA_Region_t *region;
- DMA_Segment_t *segment;
- dma_addr_t srcPhysAddr;
- dma_addr_t dstPhysAddr;
- int regionIdx;
- int segmentIdx;
-
- devAttr = &DMA_gDeviceAttribute[dev];
-
- down(&memMap->lock);
-
- /* Figure out how many descriptors we need */
-
- numDescriptors = 0;
- for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
- region = &memMap->region[regionIdx];
-
- for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
- segmentIdx++) {
- segment = ®ion->segment[segmentIdx];
-
- if (memMap->dir == DMA_TO_DEVICE) {
- srcPhysAddr = segment->physAddr;
- dstPhysAddr = devPhysAddr;
- } else {
- srcPhysAddr = devPhysAddr;
- dstPhysAddr = segment->physAddr;
- }
-
- rc =
- dma_calculate_descriptor_count(dev, srcPhysAddr,
- dstPhysAddr,
- segment->
- numBytes);
- if (rc < 0) {
- printk(KERN_ERR
- "%s: dma_calculate_descriptor_count failed: %d\n",
- __func__, rc);
- goto out;
- }
- numDescriptors += rc;
- }
- }
-
- /* Adjust the size of the ring, if it isn't big enough */
-
- if (numDescriptors > devAttr->ring.descriptorsAllocated) {
- dma_free_descriptor_ring(&devAttr->ring);
- rc =
- dma_alloc_descriptor_ring(&devAttr->ring,
- numDescriptors);
- if (rc < 0) {
- printk(KERN_ERR
- "%s: dma_alloc_descriptor_ring failed: %d\n",
- __func__, rc);
- goto out;
- }
- } else {
- rc =
- dma_init_descriptor_ring(&devAttr->ring,
- numDescriptors);
- if (rc < 0) {
- printk(KERN_ERR
- "%s: dma_init_descriptor_ring failed: %d\n",
- __func__, rc);
- goto out;
- }
- }
-
- /* Populate the descriptors */
-
- for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
- region = &memMap->region[regionIdx];
-
- for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
- segmentIdx++) {
- segment = ®ion->segment[segmentIdx];
-
- if (memMap->dir == DMA_TO_DEVICE) {
- srcPhysAddr = segment->physAddr;
- dstPhysAddr = devPhysAddr;
- } else {
- srcPhysAddr = devPhysAddr;
- dstPhysAddr = segment->physAddr;
- }
-
- rc =
- dma_add_descriptors(&devAttr->ring, dev,
- srcPhysAddr, dstPhysAddr,
- segment->numBytes);
- if (rc < 0) {
- printk(KERN_ERR
- "%s: dma_add_descriptors failed: %d\n",
- __func__, rc);
- goto out;
- }
- }
- }
-
- rc = 0;
-
-out:
-
- up(&memMap->lock);
- return rc;
-}
-
-EXPORT_SYMBOL(dma_map_create_descriptor_ring);
-
-/****************************************************************************/
-/**
-* Maps in a memory region such that it can be used for performing a DMA.
-*
-* @return
-*/
-/****************************************************************************/
-
-int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */
- int dirtied /* non-zero if any of the pages were modified */
- ) {
-
- int rc = 0;
- int regionIdx;
- int segmentIdx;
- DMA_Region_t *region;
- DMA_Segment_t *segment;
-
- down(&memMap->lock);
-
- for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
- region = &memMap->region[regionIdx];
-
- for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
- segmentIdx++) {
- segment = ®ion->segment[segmentIdx];
-
- switch (region->memType) {
- case DMA_MEM_TYPE_VMALLOC:
- {
- printk(KERN_ERR
- "%s: vmalloc'd pages are not yet supported\n",
- __func__);
- rc = -EINVAL;
- goto out;
- }
-
- case DMA_MEM_TYPE_KMALLOC:
- {
-#if ALLOW_MAP_OF_KMALLOC_MEMORY
- dma_unmap_single(NULL,
- segment->physAddr,
- segment->numBytes,
- memMap->dir);
-#endif
- break;
- }
-
- case DMA_MEM_TYPE_DMA:
- {
- dma_sync_single_for_cpu(NULL,
- segment->
- physAddr,
- segment->
- numBytes,
- memMap->dir);
- break;
- }
-
- case DMA_MEM_TYPE_USER:
- {
- /* Nothing to do here. */
-
- break;
- }
-
- default:
- {
- printk(KERN_ERR
- "%s: Unsupported memory type: %d\n",
- __func__, region->memType);
- rc = -EINVAL;
- goto out;
- }
- }
-
- segment->virtAddr = NULL;
- segment->physAddr = 0;
- segment->numBytes = 0;
- }
-
- if (region->numLockedPages > 0) {
- int pageIdx;
-
- /* Some user pages were locked. We need to go and unlock them now. */
-
- for (pageIdx = 0; pageIdx < region->numLockedPages;
- pageIdx++) {
- struct page *page =
- region->lockedPages[pageIdx];
-
- if (memMap->dir == DMA_FROM_DEVICE) {
- SetPageDirty(page);
- }
- page_cache_release(page);
- }
- kfree(region->lockedPages);
- region->numLockedPages = 0;
- region->lockedPages = NULL;
- }
-
- region->memType = DMA_MEM_TYPE_NONE;
- region->virtAddr = NULL;
- region->numBytes = 0;
- region->numSegmentsUsed = 0;
- }
- memMap->userTask = NULL;
- memMap->numRegionsUsed = 0;
- memMap->inUse = 0;
-
-out:
- up(&memMap->lock);
-
- return rc;
-}
-
-EXPORT_SYMBOL(dma_unmap);
/* ---- Include Files ---------------------------------------------------- */
#include <linux/kernel.h>
-#include <linux/wait.h>
#include <linux/semaphore.h>
#include <csp/dmacHw.h>
#include <mach/timer.h>
-#include <linux/scatterlist.h>
-#include <linux/dma-mapping.h>
-#include <linux/mm.h>
-#include <linux/vmalloc.h>
-#include <linux/pagemap.h>
/* ---- Constants and Types ---------------------------------------------- */
} DMA_DescriptorRing_t;
-/****************************************************************************
-*
-* The DMA_MemType_t and DMA_MemMap_t are helper structures used to setup
-* DMA chains from a variety of memory sources.
-*
-*****************************************************************************/
-
-#define DMA_MEM_MAP_MIN_SIZE 4096 /* Pages less than this size are better */
- /* off not being DMA'd. */
-
-typedef enum {
- DMA_MEM_TYPE_NONE, /* Not a valid setting */
- DMA_MEM_TYPE_VMALLOC, /* Memory came from vmalloc call */
- DMA_MEM_TYPE_KMALLOC, /* Memory came from kmalloc call */
- DMA_MEM_TYPE_DMA, /* Memory came from dma_alloc_xxx call */
- DMA_MEM_TYPE_USER, /* Memory came from user space. */
-
-} DMA_MemType_t;
-
-/* A segment represents a physically and virtually contiguous chunk of memory. */
-/* i.e. each segment can be DMA'd */
-/* A user of the DMA code will add memory regions. Each region may need to be */
-/* represented by one or more segments. */
-
-typedef struct {
- void *virtAddr; /* Virtual address used for this segment */
- dma_addr_t physAddr; /* Physical address this segment maps to */
- size_t numBytes; /* Size of the segment, in bytes */
-
-} DMA_Segment_t;
-
-/* A region represents a virtually contiguous chunk of memory, which may be */
-/* made up of multiple segments. */
-
-typedef struct {
- DMA_MemType_t memType;
- void *virtAddr;
- size_t numBytes;
-
- /* Each region (virtually contiguous) consists of one or more segments. Each */
- /* segment is virtually and physically contiguous. */
-
- int numSegmentsUsed;
- int numSegmentsAllocated;
- DMA_Segment_t *segment;
-
- /* When a region corresponds to user memory, we need to lock all of the pages */
- /* down before we can figure out the physical addresses. The lockedPage array contains */
- /* the pages that were locked, and which subsequently need to be unlocked once the */
- /* memory is unmapped. */
-
- unsigned numLockedPages;
- struct page **lockedPages;
-
-} DMA_Region_t;
-
-typedef struct {
- int inUse; /* Is this mapping currently being used? */
- struct semaphore lock; /* Acquired when using this structure */
- enum dma_data_direction dir; /* Direction this transfer is intended for */
-
- /* In the event that we're mapping user memory, we need to know which task */
- /* the memory is for, so that we can obtain the correct mm locks. */
-
- struct task_struct *userTask;
-
- int numRegionsUsed;
- int numRegionsAllocated;
- DMA_Region_t *region;
-
-} DMA_MemMap_t;
-
/****************************************************************************
*
* The DMA_DeviceAttribute_t contains information which describes a
size_t numBytes /* Number of bytes in each destination buffer */
);
-/****************************************************************************/
-/**
-* Initializes a DMA_MemMap_t data structure
-*/
-/****************************************************************************/
-
-int dma_init_mem_map(DMA_MemMap_t *memMap /* Stores state information about the map */
- );
-
-/****************************************************************************/
-/**
-* Releases any memory currently being held by a memory mapping structure.
-*/
-/****************************************************************************/
-
-int dma_term_mem_map(DMA_MemMap_t *memMap /* Stores state information about the map */
- );
-
-/****************************************************************************/
-/**
-* Looks at a memory address and categorizes it.
-*
-* @return One of the values from the DMA_MemType_t enumeration.
-*/
-/****************************************************************************/
-
-DMA_MemType_t dma_mem_type(void *addr);
-
-/****************************************************************************/
-/**
-* Sets the process (aka userTask) associated with a mem map. This is
-* required if user-mode segments will be added to the mapping.
-*/
-/****************************************************************************/
-
-static inline void dma_mem_map_set_user_task(DMA_MemMap_t *memMap,
- struct task_struct *task)
-{
- memMap->userTask = task;
-}
-
-/****************************************************************************/
-/**
-* Looks at a memory address and determines if we support DMA'ing to/from
-* that type of memory.
-*
-* @return boolean -
-* return value != 0 means dma supported
-* return value == 0 means dma not supported
-*/
-/****************************************************************************/
-
-int dma_mem_supports_dma(void *addr);
-
-/****************************************************************************/
-/**
-* Initializes a memory map for use. Since this function acquires a
-* sempaphore within the memory map, it is VERY important that dma_unmap
-* be called when you're finished using the map.
-*/
-/****************************************************************************/
-
-int dma_map_start(DMA_MemMap_t *memMap, /* Stores state information about the map */
- enum dma_data_direction dir /* Direction that the mapping will be going */
- );
-
-/****************************************************************************/
-/**
-* Adds a segment of memory to a memory map.
-*
-* @return 0 on success, error code otherwise.
-*/
-/****************************************************************************/
-
-int dma_map_add_region(DMA_MemMap_t *memMap, /* Stores state information about the map */
- void *mem, /* Virtual address that we want to get a map of */
- size_t numBytes /* Number of bytes being mapped */
- );
-
-/****************************************************************************/
-/**
-* Creates a descriptor ring from a memory mapping.
-*
-* @return 0 on success, error code otherwise.
-*/
-/****************************************************************************/
-
-int dma_map_create_descriptor_ring(DMA_Device_t dev, /* DMA device (where the ring is stored) */
- DMA_MemMap_t *memMap, /* Memory map that will be used */
- dma_addr_t devPhysAddr /* Physical address of device */
- );
-
-/****************************************************************************/
-/**
-* Maps in a memory region such that it can be used for performing a DMA.
-*
-* @return
-*/
-/****************************************************************************/
-
-int dma_map_mem(DMA_MemMap_t *memMap, /* Stores state information about the map */
- void *addr, /* Virtual address that we want to get a map of */
- size_t count, /* Number of bytes being mapped */
- enum dma_data_direction dir /* Direction that the mapping will be going */
- );
-
-/****************************************************************************/
-/**
-* Maps in a memory region such that it can be used for performing a DMA.
-*
-* @return
-*/
-/****************************************************************************/
-
-int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */
- int dirtied /* non-zero if any of the pages were modified */
- );
-
/****************************************************************************/
/**
* Initiates a transfer when the descriptors have already been setup.
#include <mach/aemif.h>
#include <mach/spi.h>
-#define DA850_EVM_PHY_ID "0:00"
+#define DA850_EVM_PHY_ID "davinci_mdio-0:00"
#define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8)
#define DA850_LCD_BL_PIN GPIO_TO_PIN(2, 15)
return 0;
}
-#define DM365_EVM_PHY_ID "0:01"
+#define DM365_EVM_PHY_ID "davinci_mdio-0:01"
/*
* A MAX-II CPLD is used for various board control functions.
*/
#include <mach/usb.h>
#include <mach/aemif.h>
-#define DM644X_EVM_PHY_ID "0:01"
+#define DM644X_EVM_PHY_ID "davinci_mdio-0:01"
#define LXT971_PHY_ID (0x001378e2)
#define LXT971_PHY_MASK (0xfffffff0)
.enabled_uarts = (1 << 0),
};
-#define DM646X_EVM_PHY_ID "0:01"
+#define DM646X_EVM_PHY_ID "davinci_mdio-0:01"
/*
* The following EDMA channels/slots are not being used by drivers (for
* example: Timer, GPIO, UART events etc) on dm646x, hence they are being
#include <mach/mmc.h>
#include <mach/usb.h>
-#define NEUROS_OSD2_PHY_ID "0:01"
+#define NEUROS_OSD2_PHY_ID "davinci_mdio-0:01"
#define LXT971_PHY_ID 0x001378e2
#define LXT971_PHY_MASK 0xfffffff0
#include <mach/da8xx.h>
#include <mach/mux.h>
-#define HAWKBOARD_PHY_ID "0:07"
+#define HAWKBOARD_PHY_ID "davinci_mdio-0:07"
#define DA850_HAWK_MMCSD_CD_PIN GPIO_TO_PIN(3, 12)
#define DA850_HAWK_MMCSD_WP_PIN GPIO_TO_PIN(3, 13)
#include <mach/mux.h>
#include <mach/usb.h>
-#define SFFSDR_PHY_ID "0:01"
+#define SFFSDR_PHY_ID "davinci_mdio-0:01"
static struct mtd_partition davinci_sffsdr_nandflash_partition[] = {
/* U-Boot Environment: Block 0
* UBL: Block 1
.div_reg = PLLDIV3,
};
-static struct clk pll1_sysclk4 = {
- .name = "pll1_sysclk4",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV4,
-};
-
-static struct clk pll1_sysclk5 = {
- .name = "pll1_sysclk5",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV5,
-};
-
-static struct clk pll1_sysclk6 = {
- .name = "pll0_sysclk6",
- .parent = &pll0_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV6,
-};
-
-static struct clk pll1_sysclk7 = {
- .name = "pll1_sysclk7",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV7,
-};
-
static struct clk i2c0_clk = {
.name = "i2c0",
.parent = &pll0_aux_clk,
CLK(NULL, "pll1_aux", &pll1_aux_clk),
CLK(NULL, "pll1_sysclk2", &pll1_sysclk2),
CLK(NULL, "pll1_sysclk3", &pll1_sysclk3),
- CLK(NULL, "pll1_sysclk4", &pll1_sysclk4),
- CLK(NULL, "pll1_sysclk5", &pll1_sysclk5),
- CLK(NULL, "pll1_sysclk6", &pll1_sysclk6),
- CLK(NULL, "pll1_sysclk7", &pll1_sysclk7),
CLK("i2c_davinci.1", NULL, &i2c0_clk),
CLK(NULL, "timer0", &timerp64_0_clk),
CLK("watchdog", NULL, &timerp64_1_clk),
static struct regulator_consumer_supply cam_consumers[] = {
{
- .dev = NULL,
+ .dev_name = NULL,
.supply = "imx_cam_vcc",
},
};
return __arm_ioremap(phys_addr, size, mtype);
}
-void imx3_init_l2x0(void)
+void __init imx3_init_l2x0(void)
{
void __iomem *l2x0_base;
void __iomem *clkctl_base;
depends on ARCH_OMAP3
default y
select OMAP_PACKAGE_CBB
- select REGULATOR_FIXED_VOLTAGE
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
config MACH_OMAP3_TOUCHBOOK
bool "OMAP3 Touch Book"
depends on ARCH_OMAP3
default y
- select BACKLIGHT_CLASS_DEVICE
config MACH_OMAP_3430SDP
bool "OMAP 3430 SDP board"
select SERIAL_8250
select SERIAL_CORE_CONSOLE
select SERIAL_8250_CONSOLE
- select REGULATOR_FIXED_VOLTAGE
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
config MACH_OMAP_ZOOM3
bool "OMAP3630 Zoom3 board"
select SERIAL_8250
select SERIAL_CORE_CONSOLE
select SERIAL_8250_CONSOLE
- select REGULATOR_FIXED_VOLTAGE
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
config MACH_CM_T35
bool "CompuLab CM-T35/CM-T3730 modules"
depends on ARCH_OMAP4
select OMAP_PACKAGE_CBL
select OMAP_PACKAGE_CBS
- select REGULATOR_FIXED_VOLTAGE
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
config MACH_OMAP4_PANDA
bool "OMAP4 Panda Board"
depends on ARCH_OMAP4
select OMAP_PACKAGE_CBL
select OMAP_PACKAGE_CBS
- select REGULATOR_FIXED_VOLTAGE
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
config OMAP3_EMU
bool "OMAP3 debugging peripherals"
#define ETH_KS8851_QUART 138
#define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO 184
#define OMAP4_SFH7741_ENABLE_GPIO 188
-#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */
+#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */
#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
+#define HDMI_GPIO_HPD 63 /* Hotplug detect */
#define DISPLAY_SEL_GPIO 59 /* LCD2/PicoDLP switch */
#define DLP_POWER_ON_GPIO 40
}
static struct gpio sdp4430_hdmi_gpios[] = {
- { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" },
+ { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" },
{ HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" },
+ { HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" },
};
static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev)
static void sdp4430_panel_disable_hdmi(struct omap_dss_device *dssdev)
{
- gpio_free(HDMI_GPIO_LS_OE);
- gpio_free(HDMI_GPIO_HPD);
+ gpio_free_array(sdp4430_hdmi_gpios, ARRAY_SIZE(sdp4430_hdmi_gpios));
}
static struct nokia_dsi_panel_data dsi1_panel = {
pr_err("%s: Could not get lcd2_reset_gpio\n", __func__);
}
+static struct omap_dss_hdmi_data sdp4430_hdmi_data = {
+ .hpd_gpio = HDMI_GPIO_HPD,
+};
+
static struct omap_dss_device sdp4430_hdmi_device = {
.name = "hdmi",
.driver_name = "hdmi_panel",
.platform_enable = sdp4430_panel_enable_hdmi,
.platform_disable = sdp4430_panel_disable_hdmi,
.channel = OMAP_DSS_CHANNEL_DIGIT,
+ .data = &sdp4430_hdmi_data,
};
static struct picodlp_panel_data sdp4430_picodlp_pdata = {
omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
else
omap_hdmi_init(0);
+
+ omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
+ omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
+ omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
}
#ifdef CONFIG_OMAP_MUX
#define GPIO_HUB_NRESET 62
#define GPIO_WIFI_PMENA 43
#define GPIO_WIFI_IRQ 53
-#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */
+#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */
#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
+#define HDMI_GPIO_HPD 63 /* Hotplug detect */
/* wl127x BT, FM, GPS connectivity chip */
static int wl1271_gpios[] = {46, -1, -1};
}
static struct gpio panda_hdmi_gpios[] = {
- { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" },
+ { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" },
{ HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" },
+ { HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" },
};
static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev)
static void omap4_panda_panel_disable_hdmi(struct omap_dss_device *dssdev)
{
- gpio_free(HDMI_GPIO_LS_OE);
- gpio_free(HDMI_GPIO_HPD);
+ gpio_free_array(panda_hdmi_gpios, ARRAY_SIZE(panda_hdmi_gpios));
}
+static struct omap_dss_hdmi_data omap4_panda_hdmi_data = {
+ .hpd_gpio = HDMI_GPIO_HPD,
+};
+
static struct omap_dss_device omap4_panda_hdmi_device = {
.name = "hdmi",
.driver_name = "hdmi_panel",
.platform_enable = omap4_panda_panel_enable_hdmi,
.platform_disable = omap4_panda_panel_disable_hdmi,
.channel = OMAP_DSS_CHANNEL_DIGIT,
+ .data = &omap4_panda_hdmi_data,
};
static struct omap_dss_device *omap4_panda_dss_devices[] = {
omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
else
omap_hdmi_init(0);
+
+ omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
+ omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
+ omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
}
static void __init omap4_panda_init(void)
break;
default:
pr_err("Invalid McSPI Revision value\n");
+ kfree(pdata);
return -EINVAL;
}
u32 reg;
u16 control_i2c_1;
- /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */
- omap_mux_init_signal("hdmi_hpd",
- OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("hdmi_cec",
OMAP_PIN_INPUT_PULLUP);
- /* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */
omap_mux_init_signal("hdmi_ddc_scl",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("hdmi_ddc_sda",
case GPMC_CONFIG_DEV_SIZE:
regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+
+ /* clear 2 target bits */
+ regval &= ~GPMC_CONFIG1_DEVICESIZE(3);
+
+ /* set the proper value */
regval |= GPMC_CONFIG1_DEVICESIZE(wval);
+
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
break;
{
u32 reg;
- if (mmc->slots[0].internal_clock) {
- reg = omap_ctrl_readl(control_devconf1_offset);
+ reg = omap_ctrl_readl(control_devconf1_offset);
+ if (mmc->slots[0].internal_clock)
reg |= OMAP2_MMCSDIO2ADPCLKISEL;
- omap_ctrl_writel(reg, control_devconf1_offset);
- }
+ else
+ reg &= ~OMAP2_MMCSDIO2ADPCLKISEL;
+ omap_ctrl_writel(reg, control_devconf1_offset);
}
-static void hsmmc23_before_set_reg(struct device *dev, int slot,
+static void hsmmc2_before_set_reg(struct device *dev, int slot,
int power_on, int vdd)
{
struct omap_mmc_platform_data *mmc = dev->platform_data;
c->caps &= ~MMC_CAP_8_BIT_DATA;
c->caps |= MMC_CAP_4_BIT_DATA;
}
- /* FALLTHROUGH */
- case 3:
if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {
/* off-chip level shifting, or none */
- mmc->slots[0].before_set_reg = hsmmc23_before_set_reg;
+ mmc->slots[0].before_set_reg = hsmmc2_before_set_reg;
mmc->slots[0].after_set_reg = NULL;
}
break;
+ case 3:
case 4:
case 5:
mmc->slots[0].before_set_reg = NULL;
omap_pm_if_early_init();
}
-#ifdef CONFIG_ARCH_OMAP2
+#ifdef CONFIG_SOC_OMAP2420
void __init omap2420_init_early(void)
{
omap2_set_globals_242x();
omap_hwmod_init_postsetup();
omap2420_clk_init();
}
+#endif
+#ifdef CONFIG_SOC_OMAP2430
void __init omap2430_init_early(void)
{
omap2_set_globals_243x();
.reset = omap_dss_reset,
};
-/*
- * 'dispc' class
- * display controller
- */
-
-static struct omap_hwmod_class_sysconfig omap2_dispc_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
- SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-struct omap_hwmod_class omap2_dispc_hwmod_class = {
- .name = "dispc",
- .sysc = &omap2_dispc_sysc,
-};
-
/*
* 'rfbi' class
* remote frame buffer interface
{ .name = "dispc", .dma_req = 5 },
{ .dma_req = -1 }
};
+
+/*
+ * 'dispc' class
+ * display controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap2_dispc_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
+ SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+struct omap_hwmod_class omap2_dispc_hwmod_class = {
+ .name = "dispc",
+ .sysc = &omap2_dispc_sysc,
+};
+
/* OMAP2xxx Timer Common */
static struct omap_hwmod_class_sysconfig omap2xxx_timer_sysc = {
.rev_offs = 0x0000,
.masters_cnt = ARRAY_SIZE(omap3xxx_dss_masters),
};
+/*
+ * 'dispc' class
+ * display controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap3_dispc_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
+ SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+ SYSC_HAS_ENAWAKEUP),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap3_dispc_hwmod_class = {
+ .name = "dispc",
+ .sysc = &omap3_dispc_sysc,
+};
+
/* l4_core -> dss_dispc */
static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dispc = {
.master = &omap3xxx_l4_core_hwmod,
static struct omap_hwmod omap3xxx_dss_dispc_hwmod = {
.name = "dss_dispc",
- .class = &omap2_dispc_hwmod_class,
+ .class = &omap3_dispc_hwmod_class,
.mpu_irqs = omap2_dispc_irqs,
.main_clk = "dss1_alwon_fck",
.prcm = {
&omap3xxx_uart2_hwmod,
&omap3xxx_uart3_hwmod,
- /* dss class */
- &omap3xxx_dss_dispc_hwmod,
- &omap3xxx_dss_dsi1_hwmod,
- &omap3xxx_dss_rfbi_hwmod,
- &omap3xxx_dss_venc_hwmod,
-
/* i2c class */
&omap3xxx_i2c1_hwmod,
&omap3xxx_i2c2_hwmod,
NULL
};
+static __initdata struct omap_hwmod *omap3xxx_dss_hwmods[] = {
+ /* dss class */
+ &omap3xxx_dss_dispc_hwmod,
+ &omap3xxx_dss_dsi1_hwmod,
+ &omap3xxx_dss_rfbi_hwmod,
+ &omap3xxx_dss_venc_hwmod,
+ NULL
+};
+
int __init omap3xxx_hwmod_init(void)
{
int r;
if (h)
r = omap_hwmod_register(h);
+ if (r < 0)
+ return r;
+
+ /*
+ * DSS code presumes that dss_core hwmod is handled first,
+ * _before_ any other DSS related hwmods so register common
+ * DSS hwmods last to ensure that dss_core is already registered.
+ * Otherwise some change things may happen, for ex. if dispc
+ * is handled before dss_core and DSS is enabled in bootloader
+ * DIPSC will be reset with outputs enabled which sometimes leads
+ * to unrecoverable L3 error.
+ * XXX The long-term fix to this is to ensure modules are set up
+ * in dependency order in the hwmod core code.
+ */
+ r = omap_hwmod_register(omap3xxx_dss_hwmods);
return r;
}
static struct omap_hwmod_addr_space omap44xx_dmic_addrs[] = {
{
+ .name = "mpu",
.pa_start = 0x4012e000,
.pa_end = 0x4012e07f,
.flags = ADDR_TYPE_RT
static struct omap_hwmod_addr_space omap44xx_dmic_dma_addrs[] = {
{
+ .name = "dma",
.pa_start = 0x4902e000,
.pa_end = 0x4902e07f,
.flags = ADDR_TYPE_RT
#include "common.h"
#include <plat/cpu.h>
#include <plat/prcm.h>
+#include <plat/irqs.h>
#include "vp.h"
ret = sr_late_init(sr_info);
if (ret) {
pr_warning("%s: Error in SR late init\n", __func__);
- return ret;
+ goto err_iounmap;
}
}
static u32 notrace dmtimer_read_sched_clock(void)
{
if (clksrc.reserved)
- return __omap_dm_timer_read_counter(clksrc.io_base, 1);
+ return __omap_dm_timer_read_counter(&clksrc, 1);
return 0;
}
.dmaor_is_32bit = 1,
.needs_tend_set = 1,
.no_dmars = 1,
+ .slave_only = 1,
};
static struct resource sh7372_usb_dmae0_resources[] = {
.dmaor_is_32bit = 1,
.needs_tend_set = 1,
.no_dmars = 1,
+ .slave_only = 1,
};
static struct resource sh7372_usb_dmae1_resources[] = {
if ((area->flags & VM_ARM_MTYPE_MASK) != VM_ARM_MTYPE(mtype))
continue;
if (__phys_to_pfn(area->phys_addr) > pfn ||
- __pfn_to_phys(pfn) + offset + size-1 >
- area->phys_addr + area->size-1)
+ __pfn_to_phys(pfn) + size-1 > area->phys_addr + area->size-1)
continue;
/* we can drop the lock here as we know *area is static */
read_unlock(&vmlist_lock);
select HAVE_KPROBES
select HAVE_GENERIC_HARDIRQS
select GENERIC_IRQ_PROBE
+ select GENERIC_ATOMIC64
select HARDIRQS_SW_RESEND
select GENERIC_IRQ_SHOW
select ARCH_HAVE_NMI_SAFE_CMPXCHG
#include <linux/cache.h>
#include <linux/of_platform.h>
#include <linux/dma-mapping.h>
-#include <linux/cpu.h>
#include <asm/cacheflush.h>
#include <asm/entry.h>
#include <asm/cpuinfo.h>
return 0;
}
-arch_initcall(setup_bus_notifier);
-
-static DEFINE_PER_CPU(struct cpu, cpu_devices);
-
-static int __init topology_init(void)
-{
- int i, ret;
-
- for_each_present_cpu(i) {
- struct cpu *c = &per_cpu(cpu_devices, i);
- ret = register_cpu(c, i);
- if (ret)
- printk(KERN_WARNING "topology_init: register_cpu %d "
- "failed (%d)\n", i, ret);
- }
-
- return 0;
-}
-subsys_initcall(topology_init);
+arch_initcall(setup_bus_notifier);
depends on HW_HAS_PCI
select PCI_DOMAINS
select GENERIC_PCI_IOMAP
+ select NO_GENERIC_PCI_IOPORT_MAP
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
#include <linux/module.h>
#include <asm/io.h>
-static void __iomem *ioport_map_pci(struct pci_dev *dev,
- unsigned long port, unsigned int nr)
+void __iomem *__pci_ioport_map(struct pci_dev *dev,
+ unsigned long port, unsigned int nr)
{
struct pci_controller *ctrl = dev->bus->sysdata;
unsigned long base = ctrl->io_map_base;
depends on SYS_SUPPORTS_PCI
select PCI_DOMAINS
select GENERIC_PCI_IOMAP
+ select NO_GENERIC_PCI_IOPORT_MAP
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
#ifndef CONFIG_GENERIC_IOMAP
-static void __iomem *ioport_map_pci(struct pci_dev *dev,
- unsigned long port, unsigned int nr)
+void __iomem *__pci_ioport_map(struct pci_dev *dev,
+ unsigned long port, unsigned int nr)
{
struct pci_channel *chan = dev->sysdata;
config SPARC32
def_bool !64BIT
select GENERIC_ATOMIC64
+ select CLZ_TAB
config SPARC64
def_bool 64BIT
the Free Software Foundation, 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
- .data
- .align 8
- .globl __clz_tab
-__clz_tab:
- .byte 0,1,2,2,3,3,3,3,4,4,4,4,4,4,4,4,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5
- .byte 6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6
- .byte 7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7
- .byte 7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7
- .byte 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8
- .byte 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8
- .byte 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8
- .byte 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8
- .size __clz_tab,256
- .global .udiv
-
.text
.align 4
+ .global .udiv
.globl __divdi3
__divdi3:
save %sp,-104,%sp
#ifdef __HAVE_ARCH_CMPXCHG
#define cmpxchg(ptr, old, new) \
- __cmpxchg((ptr), (old), (new), sizeof(*ptr))
+ __cmpxchg(ptr, old, new, sizeof(*(ptr)))
#define sync_cmpxchg(ptr, old, new) \
- __sync_cmpxchg((ptr), (old), (new), sizeof(*ptr))
+ __sync_cmpxchg(ptr, old, new, sizeof(*(ptr)))
#define cmpxchg_local(ptr, old, new) \
- __cmpxchg_local((ptr), (old), (new), sizeof(*ptr))
+ __cmpxchg_local(ptr, old, new, sizeof(*(ptr)))
#endif
/*
int (*intercept)(struct x86_emulate_ctxt *ctxt,
struct x86_instruction_info *info,
enum x86_intercept_stage stage);
+
+ bool (*get_cpuid)(struct x86_emulate_ctxt *ctxt,
+ u32 *eax, u32 *ebx, u32 *ecx, u32 *edx);
};
typedef u32 __attribute__((vector_size(16))) sse128_t;
#define X86EMUL_MODE_PROT (X86EMUL_MODE_PROT16|X86EMUL_MODE_PROT32| \
X86EMUL_MODE_PROT64)
+/* CPUID vendors */
+#define X86EMUL_CPUID_VENDOR_AuthenticAMD_ebx 0x68747541
+#define X86EMUL_CPUID_VENDOR_AuthenticAMD_ecx 0x444d4163
+#define X86EMUL_CPUID_VENDOR_AuthenticAMD_edx 0x69746e65
+
+#define X86EMUL_CPUID_VENDOR_AMDisbetterI_ebx 0x69444d41
+#define X86EMUL_CPUID_VENDOR_AMDisbetterI_ecx 0x21726574
+#define X86EMUL_CPUID_VENDOR_AMDisbetterI_edx 0x74656273
+
+#define X86EMUL_CPUID_VENDOR_GenuineIntel_ebx 0x756e6547
+#define X86EMUL_CPUID_VENDOR_GenuineIntel_ecx 0x6c65746e
+#define X86EMUL_CPUID_VENDOR_GenuineIntel_edx 0x49656e69
+
enum x86_intercept_stage {
X86_ICTP_NONE = 0, /* Allow zero-init to not match anything */
X86_ICPT_PRE_EXCEPT,
unsigned short ss;
unsigned long sp;
#endif
- printk(KERN_EMERG "%s: %04lx [#%d] ", str, err & 0xffff, ++die_counter);
+ printk(KERN_DEFAULT
+ "%s: %04lx [#%d] ", str, err & 0xffff, ++die_counter);
#ifdef CONFIG_PREEMPT
printk("PREEMPT ");
#endif
if (!stack) {
if (regs)
stack = (unsigned long *)regs->sp;
- else if (task && task != current)
+ else if (task != current)
stack = (unsigned long *)task->thread.sp;
else
stack = &dummy;
unsigned char c;
u8 *ip;
- printk(KERN_EMERG "Stack:\n");
+ printk(KERN_DEFAULT "Stack:\n");
show_stack_log_lvl(NULL, regs, (unsigned long *)sp,
- 0, KERN_EMERG);
+ 0, KERN_DEFAULT);
- printk(KERN_EMERG "Code: ");
+ printk(KERN_DEFAULT "Code: ");
ip = (u8 *)regs->ip - code_prologue;
if (ip < (u8 *)PAGE_OFFSET || probe_kernel_address(ip, c)) {
enum reboot_type reboot_type = BOOT_ACPI;
int reboot_force;
+/* This variable is used privately to keep track of whether or not
+ * reboot_type is still set to its default value (i.e., reboot= hasn't
+ * been set on the command line). This is needed so that we can
+ * suppress DMI scanning for reboot quirks. Without it, it's
+ * impossible to override a faulty reboot quirk without recompiling.
+ */
+static int reboot_default = 1;
+
#if defined(CONFIG_X86_32) && defined(CONFIG_SMP)
static int reboot_cpu = -1;
#endif
static int __init reboot_setup(char *str)
{
for (;;) {
+ /* Having anything passed on the command line via
+ * reboot= will cause us to disable DMI checking
+ * below.
+ */
+ reboot_default = 0;
+
switch (*str) {
case 'w':
reboot_mode = 0x1234;
DMI_MATCH(DMI_BOARD_NAME, "P4S800"),
},
},
- { /* Handle problems with rebooting on VersaLogic Menlow boards */
- .callback = set_bios_reboot,
- .ident = "VersaLogic Menlow based board",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR, "VersaLogic Corporation"),
- DMI_MATCH(DMI_BOARD_NAME, "VersaLogic Menlow board"),
- },
- },
{ /* Handle reboot issue on Acer Aspire one */
.callback = set_kbd_reboot,
.ident = "Acer Aspire One A110",
static int __init reboot_init(void)
{
- dmi_check_system(reboot_dmi_table);
+ /* Only do the DMI check if reboot_type hasn't been overridden
+ * on the command line
+ */
+ if (reboot_default) {
+ dmi_check_system(reboot_dmi_table);
+ }
return 0;
}
core_initcall(reboot_init);
static int __init pci_reboot_init(void)
{
- dmi_check_system(pci_reboot_dmi_table);
+ /* Only do the DMI check if reboot_type hasn't been overridden
+ * on the command line
+ */
+ if (reboot_default) {
+ dmi_check_system(pci_reboot_dmi_table);
+ }
return 0;
}
core_initcall(pci_reboot_init);
ss->p = 1;
}
+static bool em_syscall_is_enabled(struct x86_emulate_ctxt *ctxt)
+{
+ struct x86_emulate_ops *ops = ctxt->ops;
+ u32 eax, ebx, ecx, edx;
+
+ /*
+ * syscall should always be enabled in longmode - so only become
+ * vendor specific (cpuid) if other modes are active...
+ */
+ if (ctxt->mode == X86EMUL_MODE_PROT64)
+ return true;
+
+ eax = 0x00000000;
+ ecx = 0x00000000;
+ if (ops->get_cpuid(ctxt, &eax, &ebx, &ecx, &edx)) {
+ /*
+ * Intel ("GenuineIntel")
+ * remark: Intel CPUs only support "syscall" in 64bit
+ * longmode. Also an 64bit guest with a
+ * 32bit compat-app running will #UD !! While this
+ * behaviour can be fixed (by emulating) into AMD
+ * response - CPUs of AMD can't behave like Intel.
+ */
+ if (ebx == X86EMUL_CPUID_VENDOR_GenuineIntel_ebx &&
+ ecx == X86EMUL_CPUID_VENDOR_GenuineIntel_ecx &&
+ edx == X86EMUL_CPUID_VENDOR_GenuineIntel_edx)
+ return false;
+
+ /* AMD ("AuthenticAMD") */
+ if (ebx == X86EMUL_CPUID_VENDOR_AuthenticAMD_ebx &&
+ ecx == X86EMUL_CPUID_VENDOR_AuthenticAMD_ecx &&
+ edx == X86EMUL_CPUID_VENDOR_AuthenticAMD_edx)
+ return true;
+
+ /* AMD ("AMDisbetter!") */
+ if (ebx == X86EMUL_CPUID_VENDOR_AMDisbetterI_ebx &&
+ ecx == X86EMUL_CPUID_VENDOR_AMDisbetterI_ecx &&
+ edx == X86EMUL_CPUID_VENDOR_AMDisbetterI_edx)
+ return true;
+ }
+
+ /* default: (not Intel, not AMD), apply Intel's stricter rules... */
+ return false;
+}
+
static int em_syscall(struct x86_emulate_ctxt *ctxt)
{
struct x86_emulate_ops *ops = ctxt->ops;
ctxt->mode == X86EMUL_MODE_VM86)
return emulate_ud(ctxt);
+ if (!(em_syscall_is_enabled(ctxt)))
+ return emulate_ud(ctxt);
+
ops->get_msr(ctxt, MSR_EFER, &efer);
setup_syscalls_segments(ctxt, &cs, &ss);
+ if (!(efer & EFER_SCE))
+ return emulate_ud(ctxt);
+
ops->get_msr(ctxt, MSR_STAR, &msr_data);
msr_data >>= 32;
cs_sel = (u16)(msr_data & 0xfffc);
int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
{
+ bool pr = false;
+
switch (msr) {
case MSR_EFER:
return set_efer(vcpu, data);
pr_unimpl(vcpu, "unimplemented perfctr wrmsr: "
"0x%x data 0x%llx\n", msr, data);
break;
+ case MSR_P6_PERFCTR0:
+ case MSR_P6_PERFCTR1:
+ pr = true;
+ case MSR_P6_EVNTSEL0:
+ case MSR_P6_EVNTSEL1:
+ if (kvm_pmu_msr(vcpu, msr))
+ return kvm_pmu_set_msr(vcpu, msr, data);
+
+ if (pr || data != 0)
+ pr_unimpl(vcpu, "disabled perfctr wrmsr: "
+ "0x%x data 0x%llx\n", msr, data);
+ break;
case MSR_K7_CLK_CTL:
/*
* Ignore all writes to this no longer documented MSR.
case MSR_FAM10H_MMIO_CONF_BASE:
data = 0;
break;
+ case MSR_P6_PERFCTR0:
+ case MSR_P6_PERFCTR1:
+ case MSR_P6_EVNTSEL0:
+ case MSR_P6_EVNTSEL1:
+ if (kvm_pmu_msr(vcpu, msr))
+ return kvm_pmu_get_msr(vcpu, msr, pdata);
+ data = 0;
+ break;
case MSR_IA32_UCODE_REV:
data = 0x100000000ULL;
break;
return kvm_x86_ops->check_intercept(emul_to_vcpu(ctxt), info, stage);
}
+static bool emulator_get_cpuid(struct x86_emulate_ctxt *ctxt,
+ u32 *eax, u32 *ebx, u32 *ecx, u32 *edx)
+{
+ struct kvm_cpuid_entry2 *cpuid = NULL;
+
+ if (eax && ecx)
+ cpuid = kvm_find_cpuid_entry(emul_to_vcpu(ctxt),
+ *eax, *ecx);
+
+ if (cpuid) {
+ *eax = cpuid->eax;
+ *ecx = cpuid->ecx;
+ if (ebx)
+ *ebx = cpuid->ebx;
+ if (edx)
+ *edx = cpuid->edx;
+ return true;
+ }
+
+ return false;
+}
+
static struct x86_emulate_ops emulate_ops = {
.read_std = kvm_read_guest_virt_system,
.write_std = kvm_write_guest_virt_system,
.get_fpu = emulator_get_fpu,
.put_fpu = emulator_put_fpu,
.intercept = emulator_intercept,
+ .get_cpuid = emulator_get_cpuid,
};
static void cache_all_regs(struct kvm_vcpu *vcpu)
stackend = end_of_stack(tsk);
if (tsk != &init_task && *stackend != STACK_END_MAGIC)
- printk(KERN_ALERT "Thread overran stack, or stack corrupted\n");
+ printk(KERN_EMERG "Thread overran stack, or stack corrupted\n");
tsk->thread.cr2 = address;
tsk->thread.trap_no = 14;
sig = 0;
/* Executive summary in case the body of the oops scrolled away */
- printk(KERN_EMERG "CR2: %016lx\n", address);
+ printk(KERN_DEFAULT "CR2: %016lx\n", address);
oops_end(flags, regs, sig);
}
/* Don't build bcopy at all ... */
#define __HAVE_ARCH_BCOPY
-#define __HAVE_ARCH_MEMSCAN
-#define memscan memchr
-
#endif /* _XTENSA_STRING_H */
goto err_free_cpumask;
}
- /*
- * Do not start hotplugged CPUs now, but when they
- * are onlined the first time
- */
- if (pr->flags.need_hotplug_init)
- return 0;
-
/*
* Do not start hotplugged CPUs now, but when they
* are onlined the first time
rbdc = __rbd_client_find(opt);
if (rbdc) {
ceph_destroy_options(opt);
+ kfree(rbd_opts);
/* using an existing client */
kref_get(&rbdc->kref);
/*
* Destroy ceph client
+ *
+ * Caller must hold node_lock.
*/
static void rbd_client_release(struct kref *kref)
{
struct rbd_client *rbdc = container_of(kref, struct rbd_client, kref);
dout("rbd_release_client %p\n", rbdc);
- spin_lock(&node_lock);
list_del(&rbdc->node);
- spin_unlock(&node_lock);
ceph_destroy_client(rbdc->client);
kfree(rbdc->rbd_opts);
*/
static void rbd_put_client(struct rbd_device *rbd_dev)
{
+ spin_lock(&node_lock);
kref_put(&rbd_dev->rbd_client->kref, rbd_client_release);
+ spin_unlock(&node_lock);
rbd_dev->rbd_client = NULL;
rbd_dev->client = NULL;
}
tasklet_init(&atchan->tasklet, atc_tasklet,
(unsigned long)atchan);
- atc_enable_irq(atchan);
+ atc_enable_chan_irq(atdma, i);
}
/* set base routines */
struct at_dma_chan *atchan = to_at_dma_chan(chan);
/* Disable interrupts */
- atc_disable_irq(atchan);
+ atc_disable_chan_irq(atdma, chan->chan_id);
tasklet_disable(&atchan->tasklet);
tasklet_kill(&atchan->tasklet);
}
-static void atc_setup_irq(struct at_dma_chan *atchan, int on)
+static void atc_setup_irq(struct at_dma *atdma, int chan_id, int on)
{
- struct at_dma *atdma = to_at_dma(atchan->chan_common.device);
- u32 ebci;
+ u32 ebci;
/* enable interrupts on buffer transfer completion & error */
- ebci = AT_DMA_BTC(atchan->chan_common.chan_id)
- | AT_DMA_ERR(atchan->chan_common.chan_id);
+ ebci = AT_DMA_BTC(chan_id)
+ | AT_DMA_ERR(chan_id);
if (on)
dma_writel(atdma, EBCIER, ebci);
else
dma_writel(atdma, EBCIDR, ebci);
}
-static inline void atc_enable_irq(struct at_dma_chan *atchan)
+static void atc_enable_chan_irq(struct at_dma *atdma, int chan_id)
{
- atc_setup_irq(atchan, 1);
+ atc_setup_irq(atdma, chan_id, 1);
}
-static inline void atc_disable_irq(struct at_dma_chan *atchan)
+static void atc_disable_chan_irq(struct at_dma *atdma, int chan_id)
{
- atc_setup_irq(atchan, 0);
+ atc_setup_irq(atdma, chan_id, 0);
}
}
if (dma_has_cap(DMA_PQ, dma_dev->cap_mask)) {
cnt = dmatest_add_threads(dtc, DMA_PQ);
- thread_count += cnt > 0 ?: 0;
+ thread_count += cnt > 0 ? cnt : 0;
}
pr_info("dmatest: Started %u threads using %s\n",
case DMA_SLAVE_CONFIG:
if (dmaengine_cfg->direction == DMA_DEV_TO_MEM) {
sdmac->per_address = dmaengine_cfg->src_addr;
- sdmac->watermark_level = dmaengine_cfg->src_maxburst;
+ sdmac->watermark_level = dmaengine_cfg->src_maxburst *
+ dmaengine_cfg->src_addr_width;
sdmac->word_size = dmaengine_cfg->src_addr_width;
} else {
sdmac->per_address = dmaengine_cfg->dst_addr;
- sdmac->watermark_level = dmaengine_cfg->dst_maxburst;
+ sdmac->watermark_level = dmaengine_cfg->dst_maxburst *
+ dmaengine_cfg->dst_addr_width;
sdmac->word_size = dmaengine_cfg->dst_addr_width;
}
sdmac->direction = dmaengine_cfg->direction;
INIT_LIST_HEAD(&shdev->common.channels);
- dma_cap_set(DMA_MEMCPY, shdev->common.cap_mask);
+ if (!pdata->slave_only)
+ dma_cap_set(DMA_MEMCPY, shdev->common.cap_mask);
if (pdata->slave && pdata->slave_num)
dma_cap_set(DMA_SLAVE, shdev->common.cap_mask);
static char ohci_driver_name[] = KBUILD_MODNAME;
#define PCI_DEVICE_ID_AGERE_FW643 0x5901
+#define PCI_DEVICE_ID_CREATIVE_SB1394 0x4001
#define PCI_DEVICE_ID_JMICRON_JMB38X_FW 0x2380
#define PCI_DEVICE_ID_TI_TSB12LV22 0x8009
#define PCI_DEVICE_ID_TI_TSB12LV26 0x8020
{PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_AGERE_FW643, 6,
QUIRK_NO_MSI},
+ {PCI_VENDOR_ID_CREATIVE, PCI_DEVICE_ID_CREATIVE_SB1394, PCI_ANY_ID,
+ QUIRK_RESET_PACKET},
+
{PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB38X_FW, PCI_ANY_ID,
QUIRK_NO_MSI},
QUIRK_NO_MSI},
{PCI_VENDOR_ID_RICOH, PCI_ANY_ID, PCI_ANY_ID,
- QUIRK_CYCLE_TIMER},
+ QUIRK_CYCLE_TIMER | QUIRK_NO_MSI},
{PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_TSB12LV22, PCI_ANY_ID,
QUIRK_CYCLE_TIMER | QUIRK_RESET_PACKET | QUIRK_NO_1394A},
};
static const char *gpio_p3_names[LPC32XX_GPIO_P3_MAX] = {
- "gpi000", "gpio01", "gpio02", "gpio03",
+ "gpio00", "gpio01", "gpio02", "gpio03",
"gpio04", "gpio05"
};
chip->reg = chip->base;
chip->ch = i;
mutex_init(&chip->lock);
+ spin_lock_init(&chip->spinlock);
ioh_gpio_setup(chip, num_ports[i]);
ret = gpiochip_add(&chip->gpio);
if (ret) {
chip->reg = chip->base;
pci_set_drvdata(pdev, chip);
mutex_init(&chip->lock);
+ spin_lock_init(&chip->spinlock);
pch_gpio_setup(chip);
ret = gpiochip_add(&chip->gpio);
if (ret) {
};
#if defined(CONFIG_ARCH_EXYNOS4) && defined(CONFIG_OF)
-static int exynos4_gpio_xlate(struct gpio_chip *gc, struct device_node *np,
- const void *gpio_spec, u32 *flags)
+static int exynos4_gpio_xlate(struct gpio_chip *gc,
+ const struct of_phandle_args *gpiospec, u32 *flags)
{
- const __be32 *gpio = gpio_spec;
- const u32 n = be32_to_cpup(gpio);
- unsigned int pin = gc->base + be32_to_cpu(gpio[0]);
+ unsigned int pin;
if (WARN_ON(gc->of_gpio_n_cells < 4))
return -EINVAL;
- if (n > gc->ngpio)
+ if (WARN_ON(gpiospec->args_count < gc->of_gpio_n_cells))
return -EINVAL;
- if (s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(be32_to_cpu(gpio[1]))))
+ if (gpiospec->args[0] > gc->ngpio)
+ return -EINVAL;
+
+ pin = gc->base + gpiospec->args[0];
+
+ if (s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(gpiospec->args[1])))
pr_warn("gpio_xlate: failed to set pin function\n");
- if (s3c_gpio_setpull(pin, be32_to_cpu(gpio[2])))
+ if (s3c_gpio_setpull(pin, gpiospec->args[2]))
pr_warn("gpio_xlate: failed to set pin pull up/down\n");
- if (s5p_gpio_set_drvstr(pin, be32_to_cpu(gpio[3])))
+ if (s5p_gpio_set_drvstr(pin, gpiospec->args[3]))
pr_warn("gpio_xlate: failed to set pin drive strength\n");
- return n;
+ return gpiospec->args[0];
}
static const struct of_device_id exynos4_gpio_dt_match[] __initdata = {
int bit_table(struct drm_device *, u8 id, struct bit_entry *);
enum dcb_gpio_tag {
- DCB_GPIO_TVDAC0 = 0xc,
+ DCB_GPIO_PANEL_POWER = 0x01,
+ DCB_GPIO_TVDAC0 = 0x0c,
DCB_GPIO_TVDAC1 = 0x2d,
- DCB_GPIO_PWM_FAN = 0x9,
+ DCB_GPIO_PWM_FAN = 0x09,
DCB_GPIO_FAN_SENSE = 0x3d,
DCB_GPIO_UNUSED = 0xff
};
if (ret)
return ret;
+ /* power on internal panel if it's not already. the init tables of
+ * some vbios default this to off for some reason, causing the
+ * panel to not work after resume
+ */
+ if (nouveau_gpio_func_get(dev, DCB_GPIO_PANEL_POWER) == 0) {
+ nouveau_gpio_func_set(dev, DCB_GPIO_PANEL_POWER, true);
+ msleep(300);
+ }
+
+ /* enable polling for external displays */
drm_kms_helper_poll_enable(dev);
/* enable hotplug interrupts */
int nouveau_ctxfw;
module_param_named(ctxfw, nouveau_ctxfw, int, 0400);
-MODULE_PARM_DESC(ctxfw, "Santise DCB table according to MXM-SIS\n");
+MODULE_PARM_DESC(mxmdcb, "Santise DCB table according to MXM-SIS\n");
int nouveau_mxmdcb = 1;
module_param_named(mxmdcb, nouveau_mxmdcb, int, 0400);
return 0;
}
+static int
+validate_sync(struct nouveau_channel *chan, struct nouveau_bo *nvbo)
+{
+ struct nouveau_fence *fence = NULL;
+ int ret = 0;
+
+ spin_lock(&nvbo->bo.bdev->fence_lock);
+ if (nvbo->bo.sync_obj)
+ fence = nouveau_fence_ref(nvbo->bo.sync_obj);
+ spin_unlock(&nvbo->bo.bdev->fence_lock);
+
+ if (fence) {
+ ret = nouveau_fence_sync(fence, chan);
+ nouveau_fence_unref(&fence);
+ }
+
+ return ret;
+}
+
static int
validate_list(struct nouveau_channel *chan, struct list_head *list,
struct drm_nouveau_gem_pushbuf_bo *pbbo, uint64_t user_pbbo_ptr)
list_for_each_entry(nvbo, list, entry) {
struct drm_nouveau_gem_pushbuf_bo *b = &pbbo[nvbo->pbbo_index];
- ret = nouveau_fence_sync(nvbo->bo.sync_obj, chan);
+ ret = validate_sync(chan, nvbo);
if (unlikely(ret)) {
NV_ERROR(dev, "fail pre-validate sync\n");
return ret;
return ret;
}
- ret = nouveau_fence_sync(nvbo->bo.sync_obj, chan);
+ ret = validate_sync(chan, nvbo);
if (unlikely(ret)) {
NV_ERROR(dev, "fail post-validate sync\n");
return ret;
if (mxm_shadow(dev, mxm[0])) {
MXM_MSG(dev, "failed to locate valid SIS\n");
+#if 0
+ /* we should, perhaps, fall back to some kind of limited
+ * mode here if the x86 vbios hasn't already done the
+ * work for us (so we prevent loading with completely
+ * whacked vbios tables).
+ */
return -EINVAL;
+#else
+ return 0;
+#endif
}
MXM_MSG(dev, "MXMS Version %d.%d\n",
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nv50_pm_state *info;
struct pll_lims pll;
- int ret = -EINVAL;
+ int clk, ret = -EINVAL;
int N, M, P1, P2;
- u32 clk, out;
+ u32 out;
if (dev_priv->chipset == 0xaa ||
dev_priv->chipset == 0xac)
WREG32(EVERGREEN_GRPH_ENABLE + radeon_crtc->crtc_offset, 1);
WREG32(EVERGREEN_DESKTOP_HEIGHT + radeon_crtc->crtc_offset,
- crtc->mode.vdisplay);
+ target_fb->height);
x &= ~3;
y &= ~1;
WREG32(EVERGREEN_VIEWPORT_START + radeon_crtc->crtc_offset,
WREG32(AVIVO_D1GRPH_ENABLE + radeon_crtc->crtc_offset, 1);
WREG32(AVIVO_D1MODE_DESKTOP_HEIGHT + radeon_crtc->crtc_offset,
- crtc->mode.vdisplay);
+ target_fb->height);
x &= ~3;
y &= ~1;
WREG32(AVIVO_D1MODE_VIEWPORT_START + radeon_crtc->crtc_offset,
ENCODER_OBJECT_ID_NUTMEG)
panel_mode = DP_PANEL_MODE_INTERNAL_DP1_MODE;
else if (radeon_connector_encoder_get_dp_bridge_encoder_id(connector) ==
- ENCODER_OBJECT_ID_TRAVIS)
- panel_mode = DP_PANEL_MODE_INTERNAL_DP2_MODE;
- else if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
+ ENCODER_OBJECT_ID_TRAVIS) {
+ u8 id[6];
+ int i;
+ for (i = 0; i < 6; i++)
+ id[i] = radeon_read_dpcd_reg(radeon_connector, 0x503 + i);
+ if (id[0] == 0x73 &&
+ id[1] == 0x69 &&
+ id[2] == 0x76 &&
+ id[3] == 0x61 &&
+ id[4] == 0x72 &&
+ id[5] == 0x54)
+ panel_mode = DP_PANEL_MODE_INTERNAL_DP1_MODE;
+ else
+ panel_mode = DP_PANEL_MODE_INTERNAL_DP2_MODE;
+ } else if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
u8 tmp = radeon_read_dpcd_reg(radeon_connector, DP_EDP_CONFIGURATION_CAP);
if (tmp & 1)
panel_mode = DP_PANEL_MODE_INTERNAL_DP2_MODE;
radeon_ring_write(ring, sq_stack_resource_mgmt_2);
}
+#define I2F_MAX_BITS 15
+#define I2F_MAX_INPUT ((1 << I2F_MAX_BITS) - 1)
+#define I2F_SHIFT (24 - I2F_MAX_BITS)
+
+/*
+ * Converts unsigned integer into 32-bit IEEE floating point representation.
+ * Conversion is not universal and only works for the range from 0
+ * to 2^I2F_MAX_BITS-1. Currently we only use it with inputs between
+ * 0 and 16384 (inclusive), so I2F_MAX_BITS=15 is enough. If necessary,
+ * I2F_MAX_BITS can be increased, but that will add to the loop iterations
+ * and slow us down. Conversion is done by shifting the input and counting
+ * down until the first 1 reaches bit position 23. The resulting counter
+ * and the shifted input are, respectively, the exponent and the fraction.
+ * The sign is always zero.
+ */
static uint32_t i2f(uint32_t input)
{
u32 result, i, exponent, fraction;
- if ((input & 0x3fff) == 0)
- result = 0; /* 0 is a special case */
+ WARN_ON_ONCE(input > I2F_MAX_INPUT);
+
+ if ((input & I2F_MAX_INPUT) == 0)
+ result = 0;
else {
- exponent = 140; /* exponent biased by 127; */
- fraction = (input & 0x3fff) << 10; /* cheat and only
- handle numbers below 2^^15 */
- for (i = 0; i < 14; i++) {
+ exponent = 126 + I2F_MAX_BITS;
+ fraction = (input & I2F_MAX_INPUT) << I2F_SHIFT;
+
+ for (i = 0; i < I2F_MAX_BITS; i++) {
if (fraction & 0x800000)
break;
else {
- fraction = fraction << 1; /* keep
- shifting left until top bit = 1 */
+ fraction = fraction << 1;
exponent = exponent - 1;
}
}
- result = exponent << 23 | (fraction & 0x7fffff); /* mask
- off top bit; assumed 1 */
+ result = exponent << 23 | (fraction & 0x7fffff);
}
return result;
}
obj = (union acpi_object *)buffer.pointer;
memcpy(bios+offset, obj->buffer.pointer, obj->buffer.length);
+ len = obj->buffer.length;
kfree(buffer.pointer);
- return obj->buffer.length;
+ return len;
}
bool radeon_atrm_supported(struct pci_dev *pdev)
if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
return 0;
+ drm_kms_helper_poll_disable(dev);
+
/* turn off display hw */
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
drm_helper_connector_dpms(connector, DRM_MODE_DPMS_OFF);
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
drm_helper_connector_dpms(connector, DRM_MODE_DPMS_ON);
}
+
+ drm_kms_helper_poll_enable(dev);
return 0;
}
i2c->rec = *rec;
i2c->adapter.owner = THIS_MODULE;
i2c->adapter.class = I2C_CLASS_DDC;
+ i2c->adapter.dev.parent = &dev->pdev->dev;
i2c->dev = dev;
snprintf(i2c->adapter.name, sizeof(i2c->adapter.name),
"Radeon aux bus %s", name);
struct mousevsc_dev *input_dev = hv_get_drvdata(dev);
vmbus_close(dev->channel);
+ hid_hw_stop(input_dev->hid_device);
hid_destroy_device(input_dev->hid_device);
mousevsc_free_device(input_dev);
wdata->battery.type = POWER_SUPPLY_TYPE_BATTERY;
wdata->battery.use_for_apm = 0;
- power_supply_powers(&wdata->battery, &hdev->dev);
ret = power_supply_register(&hdev->dev, &wdata->battery);
if (ret) {
goto err_battery;
}
+ power_supply_powers(&wdata->battery, &hdev->dev);
+
wdata->ac.properties = wacom_ac_props;
wdata->ac.num_properties = ARRAY_SIZE(wacom_ac_props);
wdata->ac.get_property = wacom_ac_get_property;
wdata->ac.type = POWER_SUPPLY_TYPE_MAINS;
wdata->ac.use_for_apm = 0;
- power_supply_powers(&wdata->battery, &hdev->dev);
-
ret = power_supply_register(&hdev->dev, &wdata->ac);
if (ret) {
hid_warn(hdev,
"can't create ac battery attribute, err: %d\n", ret);
goto err_ac;
}
+
+ power_supply_powers(&wdata->ac, &hdev->dev);
#endif
return 0;
wdata->battery.type = POWER_SUPPLY_TYPE_BATTERY;
wdata->battery.use_for_apm = 0;
- power_supply_powers(&wdata->battery, &hdev->dev);
-
ret = power_supply_register(&wdata->hdev->dev, &wdata->battery);
if (ret) {
hid_err(hdev, "Cannot register battery device\n");
goto err_battery;
}
+ power_supply_powers(&wdata->battery, &hdev->dev);
+
ret = wiimote_leds_create(wdata);
if (ret)
goto err_free;
struct hiddev *hiddev = hid->hiddev;
struct usbhid_device *usbhid = hid->driver_data;
+ usb_deregister_dev(usbhid->intf, &hiddev_class);
+
mutex_lock(&hiddev->existancelock);
hiddev->exist = 0;
- usb_deregister_dev(usbhid->intf, &hiddev_class);
-
if (hiddev->open) {
mutex_unlock(&hiddev->existancelock);
usbhid_close(hiddev->hid);
fan4min = 0;
fan5pin = 0;
} else if (sio_data->kind == nct6776) {
- fan3pin = !(superio_inb(sio_data->sioreg, 0x24) & 0x40);
- fan4pin = !!(superio_inb(sio_data->sioreg, 0x1C) & 0x01);
- fan5pin = !!(superio_inb(sio_data->sioreg, 0x1C) & 0x02);
+ bool gpok = superio_inb(sio_data->sioreg, 0x27) & 0x80;
+
+ superio_select(sio_data->sioreg, W83627EHF_LD_HWM);
+ regval = superio_inb(sio_data->sioreg, SIO_REG_ENABLE);
+
+ if (regval & 0x80)
+ fan3pin = gpok;
+ else
+ fan3pin = !(superio_inb(sio_data->sioreg, 0x24) & 0x40);
+
+ if (regval & 0x40)
+ fan4pin = gpok;
+ else
+ fan4pin = !!(superio_inb(sio_data->sioreg, 0x1C) & 0x01);
+
+ if (regval & 0x20)
+ fan5pin = gpok;
+ else
+ fan5pin = !!(superio_inb(sio_data->sioreg, 0x1C) & 0x02);
+
fan4min = fan4pin;
} else if (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b) {
fan3pin = 1;
goto err_release_region;
}
- match = of_match_device(omap_i2c_of_match, &pdev->dev);
+ match = of_match_device(of_match_ptr(omap_i2c_of_match), &pdev->dev);
if (match) {
u32 freq = 100000; /* default to 100000 Hz */
return PTR_ERR(ctx);
if (cmd.conn_param.valid) {
- ctx->uid = cmd.uid;
ucma_copy_conn_param(&conn_param, &cmd.conn_param);
+ mutex_lock(&file->mut);
ret = rdma_accept(ctx->cm_id, &conn_param);
+ if (!ret)
+ ctx->uid = cmd.uid;
+ mutex_unlock(&file->mut);
} else
ret = rdma_accept(ctx->cm_id, NULL);
qp->event_handler = attr.event_handler;
qp->qp_context = attr.qp_context;
qp->qp_type = attr.qp_type;
+ atomic_set(&qp->usecnt, 0);
atomic_inc(&pd->usecnt);
atomic_inc(&attr.send_cq->usecnt);
if (attr.recv_cq)
qp->uobject = NULL;
qp->qp_type = qp_init_attr->qp_type;
+ atomic_set(&qp->usecnt, 0);
if (qp_init_attr->qp_type == IB_QPT_XRC_TGT) {
qp->event_handler = __ib_shared_qp_event_handler;
qp->qp_context = qp;
qp->xrcd = qp_init_attr->xrcd;
atomic_inc(&qp_init_attr->xrcd->usecnt);
INIT_LIST_HEAD(&qp->open_list);
- atomic_set(&qp->usecnt, 0);
real_qp = qp;
qp = __ib_open_qp(real_qp, qp_init_attr->event_handler,
error = ipathfs_mknod(parent->d_inode, *dentry,
mode, fops, data);
else
- error = PTR_ERR(dentry);
+ error = PTR_ERR(*dentry);
mutex_unlock(&parent->d_inode->i_mutex);
return error;
return IB_MAD_RESULT_SUCCESS;
/*
- * Don't process SMInfo queries or vendor-specific
- * MADs -- the SMA can't handle them.
+ * Don't process SMInfo queries -- the SMA can't handle them.
*/
- if (in_mad->mad_hdr.attr_id == IB_SMP_ATTR_SM_INFO ||
- ((in_mad->mad_hdr.attr_id & IB_SMP_ATTR_VENDOR_MASK) ==
- IB_SMP_ATTR_VENDOR_MASK))
+ if (in_mad->mad_hdr.attr_id == IB_SMP_ATTR_SM_INFO)
return IB_MAD_RESULT_SUCCESS;
} else if (in_mad->mad_hdr.mgmt_class == IB_MGMT_CLASS_PERF_MGMT ||
in_mad->mad_hdr.mgmt_class == MLX4_IB_VENDOR_CLASS1 ||
/*
- * Copyright (c) 2006 - 2009 Intel Corporation. All rights reserved.
+ * Copyright (c) 2006 - 2011 Intel Corporation. All rights reserved.
* Copyright (c) 2005 Open Grid Computing, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
/*
- * Copyright (c) 2006 - 2009 Intel Corporation. All rights reserved.
+ * Copyright (c) 2006 - 2011 Intel Corporation. All rights reserved.
* Copyright (c) 2005 Open Grid Computing, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
/*
- * Copyright (c) 2006 - 2009 Intel Corporation. All rights reserved.
+ * Copyright (c) 2006 - 2011 Intel Corporation. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
u8 *start_ptr = &start_addr;
u8 **start_buff = &start_ptr;
u16 buff_len = 0;
+ struct ietf_mpa_v1 *mpa_frame;
skb = dev_alloc_skb(MAX_CM_BUFFER);
if (!skb) {
/* send an MPA reject frame */
cm_build_mpa_frame(cm_node, start_buff, &buff_len, NULL, MPA_KEY_REPLY);
+ mpa_frame = (struct ietf_mpa_v1 *)*start_buff;
+ mpa_frame->flags |= IETF_MPA_FLAGS_REJECT;
form_cm_frame(skb, cm_node, NULL, 0, *start_buff, buff_len, SET_ACK | SET_FIN);
cm_node->state = NES_CM_STATE_FIN_WAIT1;
if (!memcmp(nesadapter->arp_table[arpindex].mac_addr,
neigh->ha, ETH_ALEN)) {
/* Mac address same as in nes_arp_table */
- ip_rt_put(rt);
- return rc;
+ goto out;
}
nes_manage_arp_cache(nesvnic->netdev,
neigh_event_send(neigh, NULL);
}
}
+
+out:
rcu_read_unlock();
ip_rt_put(rt);
return rc;
/*
- * Copyright (c) 2006 - 2009 Intel Corporation. All rights reserved.
+ * Copyright (c) 2006 - 2011 Intel Corporation. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
/*
- * Copyright (c) 2006 - 2009 Intel Corporation. All rights reserved.
+ * Copyright (c) 2006 - 2011 Intel Corporation. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
/*
- * Copyright (c) 2006 - 2009 Intel Corporation. All rights reserved.
+ * Copyright (c) 2006 - 2011 Intel Corporation. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
/*
-* Copyright (c) 2006 - 2009 Intel Corporation. All rights reserved.
+* Copyright (c) 2006 - 2011 Intel Corporation. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
/*
- * Copyright (c) 2006 - 2009 Intel-NE, Inc. All rights reserved.
+ * Copyright (c) 2006 - 2011 Intel-NE, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
/*
-* Copyright (c) 2010 Intel-NE, Inc. All rights reserved.
+* Copyright (c) 2006 - 2011 Intel-NE, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
/*
- * Copyright (c) 2006 - 2009 Intel Corporation. All rights reserved.
+ * Copyright (c) 2006 - 2011 Intel Corporation. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
/*
- * Copyright (c) 2006 - 2009 Intel Corporation. All rights reserved.
+ * Copyright (c) 2006 - 2011 Intel Corporation. All rights reserved.
* Copyright (c) 2005 Topspin Communications. All rights reserved.
* Copyright (c) 2005 Cisco Systems. All rights reserved.
* Copyright (c) 2005 Open Grid Computing, Inc. All rights reserved.
/*
- * Copyright (c) 2006 - 2009 Intel Corporation. All rights reserved.
+ * Copyright (c) 2006 - 2011 Intel Corporation. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
/*
- * Copyright (c) 2006 - 2009 Intel Corporation. All rights reserved.
+ * Copyright (c) 2006 - 2011 Intel Corporation. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
set_wqe_32bit_value(wqe->wqe_words,
NES_IWARP_SQ_FMR_WQE_LENGTH_LOW_IDX,
ib_wr->wr.fast_reg.length);
+ set_wqe_32bit_value(wqe->wqe_words,
+ NES_IWARP_SQ_FMR_WQE_LENGTH_HIGH_IDX, 0);
set_wqe_32bit_value(wqe->wqe_words,
NES_IWARP_SQ_FMR_WQE_MR_STAG_IDX,
ib_wr->wr.fast_reg.rkey);
entry->opcode = IB_WC_SEND;
break;
case NES_IWARP_SQ_OP_LOCINV:
- entry->opcode = IB_WR_LOCAL_INV;
+ entry->opcode = IB_WC_LOCAL_INV;
break;
case NES_IWARP_SQ_OP_FAST_REG:
entry->opcode = IB_WC_FAST_REG_MR;
/*
- * Copyright (c) 2006 - 2009 Intel Corporation. All rights reserved.
+ * Copyright (c) 2006 - 2011 Intel Corporation. All rights reserved.
* Copyright (c) 2005 Open Grid Computing, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
dd->cspec->dummy_hdrq = dma_alloc_coherent(&dd->pcidev->dev,
dd->rcd[0]->rcvhdrq_size,
&dd->cspec->dummy_hdrq_phys,
- GFP_KERNEL | __GFP_COMP);
+ GFP_ATOMIC | __GFP_COMP);
if (!dd->cspec->dummy_hdrq) {
qib_devinfo(dd->pcidev, "Couldn't allocate dummy hdrq\n");
/* fallback to just 0'ing */
* BIOS may not set PCIe bus-utilization parameters for best performance.
* Check and optionally adjust them to maximize our throughput.
*/
-static int qib_pcie_caps = 0x51;
+static int qib_pcie_caps;
module_param_named(pcie_caps, qib_pcie_caps, int, S_IRUGO);
MODULE_PARM_DESC(pcie_caps, "Max PCIe tuning: Payload (0..3), ReadReq (4..7)");
*/
static u64 srpt_service_guid;
-static spinlock_t srpt_dev_lock; /* Protects srpt_dev_list. */
-static struct list_head srpt_dev_list; /* List of srpt_device structures. */
+static DEFINE_SPINLOCK(srpt_dev_lock); /* Protects srpt_dev_list. */
+static LIST_HEAD(srpt_dev_list); /* List of srpt_device structures. */
static unsigned srp_max_req_size = DEFAULT_MAX_REQ_SIZE;
module_param(srp_max_req_size, int, 0444);
while (--i >= 0)
srpt_free_ioctx(sdev, ring[i], dma_size, dir);
kfree(ring);
+ ring = NULL;
out:
return ring;
}
}
ch->sess = transport_init_session();
- if (!ch->sess) {
+ if (IS_ERR(ch->sess)) {
rej->reason = __constant_cpu_to_be32(
SRP_LOGIN_REJ_INSUFFICIENT_RESOURCES);
pr_debug("Failed to create session\n");
for (i = 0; i < sdev->srq_size; ++i)
srpt_post_recv(sdev, sdev->ioctx_ring[i]);
- WARN_ON(sdev->device->phys_port_cnt
- > sizeof(sdev->port)/sizeof(sdev->port[0]));
+ WARN_ON(sdev->device->phys_port_cnt > ARRAY_SIZE(sdev->port));
for (i = 1; i <= sdev->device->phys_port_cnt; i++) {
sport = &sdev->port[i - 1];
goto out;
}
- spin_lock_init(&srpt_dev_lock);
- INIT_LIST_HEAD(&srpt_dev_list);
-
- ret = -ENODEV;
srpt_target = target_fabric_configfs_init(THIS_MODULE, "srpt");
- if (!srpt_target) {
+ if (IS_ERR(srpt_target)) {
printk(KERN_ERR "couldn't register\n");
+ ret = PTR_ERR(srpt_target);
goto out;
}
#ifndef IB_SRPT_H
#define IB_SRPT_H
-#include <linux/version.h>
#include <linux/types.h>
#include <linux/list.h>
#include <linux/wait.h>
struct evdev_client *client = file->private_data;
struct evdev *evdev = client->evdev;
struct input_event event;
- int retval;
+ int retval = 0;
if (count < input_event_size())
return -EINVAL;
#include <linux/i2c/twl.h>
#include <linux/slab.h>
-
/*
* The TWL4030 family chips include a keypad controller that supports
* up to an 8x8 switch matrix. The controller can issue system wakeup
if (twl4030_kpwrite_u8(kp, i, KEYP_DEB) < 0)
return -EIO;
- /* Set timeout period to 100 ms */
+ /* Set timeout period to 200 ms */
i = KEYP_PERIOD_US(200000, PTV_PRESCALER);
if (twl4030_kpwrite_u8(kp, (i & 0xFF), KEYP_TIMEOUT_L) < 0)
return -EIO;
MODULE_DESCRIPTION("TWL4030 Keypad Driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:twl4030_keypad");
-
DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 1720"),
},
},
+ {
+ /* Lenovo Ideapad U455 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "20046"),
+ },
+ },
{ }
};
struct serio_raw_client *client = file->private_data;
struct serio_raw *serio_raw = client->serio_raw;
char uninitialized_var(c);
- ssize_t retval = 0;
+ ssize_t read = 0;
+ int retval;
if (serio_raw->dead)
return -ENODEV;
if (serio_raw->dead)
return -ENODEV;
- while (retval < count && serio_raw_fetch_byte(serio_raw, &c)) {
- if (put_user(c, buffer++))
- return -EFAULT;
- retval++;
+ while (read < count && serio_raw_fetch_byte(serio_raw, &c)) {
+ if (put_user(c, buffer++)) {
+ retval = -EFAULT;
+ break;
+ }
+ read++;
}
- return retval;
+ return read ?: retval;
}
static ssize_t serio_raw_write(struct file *file, const char __user *buffer,
for_each_pci_dev(pdev) {
if (!check_device(&pdev->dev)) {
+
+ iommu_ignore_device(&pdev->dev);
+
unhandled += 1;
continue;
}
priv = domain->priv;
- if (!priv) {
- ret = -ENODEV;
+ if (!priv)
goto fail;
- }
fl_table = priv->pgtable;
if (len != SZ_16M && len != SZ_1M &&
len != SZ_64K && len != SZ_4K) {
pr_debug("Bad length: %d\n", len);
- ret = -EINVAL;
goto fail;
}
if (!fl_table) {
pr_debug("Null page table\n");
- ret = -EINVAL;
goto fail;
}
if (*fl_pte == 0) {
pr_debug("First level PTE is 0\n");
- ret = -ENODEV;
goto fail;
}
if (drvdata->mode == LM3530_BL_MODE_ALS) {
if (pltfm->als_vmax == 0) {
- pltfm->als_vmin = als_vmin = 0;
- pltfm->als_vmin = als_vmax = LM3530_ALS_WINDOW_mV;
+ pltfm->als_vmin = 0;
+ pltfm->als_vmax = LM3530_ALS_WINDOW_mV;
}
als_vmin = pltfm->als_vmin;
struct raid_set {
struct dm_target *ti;
- uint64_t print_flags;
+ uint32_t bitmap_loaded;
+ uint32_t print_flags;
struct mddev md;
struct raid_type *raid_type;
raid_param_cnt += 2;
}
- raid_param_cnt += (hweight64(rs->print_flags & ~DMPF_REBUILD) * 2);
+ raid_param_cnt += (hweight32(rs->print_flags & ~DMPF_REBUILD) * 2);
if (rs->print_flags & (DMPF_SYNC | DMPF_NOSYNC))
raid_param_cnt--;
{
struct raid_set *rs = ti->private;
- bitmap_load(&rs->md);
+ if (!rs->bitmap_loaded) {
+ bitmap_load(&rs->md);
+ rs->bitmap_loaded = 1;
+ } else
+ md_wakeup_thread(rs->md.thread);
+
mddev_resume(&rs->md);
}
printk(KERN_INFO
"md: checkpointing %s of %s.\n",
desc, mdname(mddev));
- mddev->recovery_cp = mddev->curr_resync;
+ mddev->recovery_cp =
+ mddev->curr_resync_completed;
}
} else
mddev->recovery_cp = MaxSector;
rcu_read_unlock();
}
}
+ skip:
set_bit(MD_CHANGE_DEVS, &mddev->flags);
- skip:
if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery)) {
/* We completed so min/max setting can be forgotten if used. */
if (test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery))
/* Default PLL configuration after power up */
twl6040->pll = TWL6040_SYSCLK_SEL_LPPLL;
twl6040->sysclk = 19200000;
+ twl6040->mclk = 32768;
} else {
/* already powered-down */
if (!twl6040->power_count) {
twl6040_power_down(twl6040);
}
twl6040->sysclk = 0;
+ twl6040->mclk = 0;
}
out:
hppllctl = twl6040_reg_read(twl6040, TWL6040_REG_HPPLLCTL);
lppllctl = twl6040_reg_read(twl6040, TWL6040_REG_LPPLLCTL);
+ /* Force full reconfiguration when switching between PLL */
+ if (pll_id != twl6040->pll) {
+ twl6040->sysclk = 0;
+ twl6040->mclk = 0;
+ }
+
switch (pll_id) {
case TWL6040_SYSCLK_SEL_LPPLL:
/* low-power PLL divider */
- switch (freq_out) {
- case 17640000:
- lppllctl |= TWL6040_LPLLFIN;
- break;
- case 19200000:
- lppllctl &= ~TWL6040_LPLLFIN;
- break;
- default:
- dev_err(twl6040->dev,
- "freq_out %d not supported\n", freq_out);
- ret = -EINVAL;
- goto pll_out;
+ /* Change the sysclk configuration only if it has been canged */
+ if (twl6040->sysclk != freq_out) {
+ switch (freq_out) {
+ case 17640000:
+ lppllctl |= TWL6040_LPLLFIN;
+ break;
+ case 19200000:
+ lppllctl &= ~TWL6040_LPLLFIN;
+ break;
+ default:
+ dev_err(twl6040->dev,
+ "freq_out %d not supported\n",
+ freq_out);
+ ret = -EINVAL;
+ goto pll_out;
+ }
+ twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
+ lppllctl);
}
- twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
+
+ /* The PLL in use has not been change, we can exit */
+ if (twl6040->pll == pll_id)
+ break;
switch (freq_in) {
case 32768:
goto pll_out;
}
- hppllctl &= ~TWL6040_MCLK_MSK;
+ if (twl6040->mclk != freq_in) {
+ hppllctl &= ~TWL6040_MCLK_MSK;
+
+ switch (freq_in) {
+ case 12000000:
+ /* PLL enabled, active mode */
+ hppllctl |= TWL6040_MCLK_12000KHZ |
+ TWL6040_HPLLENA;
+ break;
+ case 19200000:
+ /*
+ * PLL disabled
+ * (enable PLL if MCLK jitter quality
+ * doesn't meet specification)
+ */
+ hppllctl |= TWL6040_MCLK_19200KHZ;
+ break;
+ case 26000000:
+ /* PLL enabled, active mode */
+ hppllctl |= TWL6040_MCLK_26000KHZ |
+ TWL6040_HPLLENA;
+ break;
+ case 38400000:
+ /* PLL enabled, active mode */
+ hppllctl |= TWL6040_MCLK_38400KHZ |
+ TWL6040_HPLLENA;
+ break;
+ default:
+ dev_err(twl6040->dev,
+ "freq_in %d not supported\n", freq_in);
+ ret = -EINVAL;
+ goto pll_out;
+ }
- switch (freq_in) {
- case 12000000:
- /* PLL enabled, active mode */
- hppllctl |= TWL6040_MCLK_12000KHZ |
- TWL6040_HPLLENA;
- break;
- case 19200000:
/*
- * PLL disabled
- * (enable PLL if MCLK jitter quality
- * doesn't meet specification)
+ * enable clock slicer to ensure input waveform is
+ * square
*/
- hppllctl |= TWL6040_MCLK_19200KHZ;
- break;
- case 26000000:
- /* PLL enabled, active mode */
- hppllctl |= TWL6040_MCLK_26000KHZ |
- TWL6040_HPLLENA;
- break;
- case 38400000:
- /* PLL enabled, active mode */
- hppllctl |= TWL6040_MCLK_38400KHZ |
- TWL6040_HPLLENA;
- break;
- default:
- dev_err(twl6040->dev,
- "freq_in %d not supported\n", freq_in);
- ret = -EINVAL;
- goto pll_out;
- }
+ hppllctl |= TWL6040_HPLLSQRENA;
- /* enable clock slicer to ensure input waveform is square */
- hppllctl |= TWL6040_HPLLSQRENA;
-
- twl6040_reg_write(twl6040, TWL6040_REG_HPPLLCTL, hppllctl);
- usleep_range(500, 700);
- lppllctl |= TWL6040_HPLLSEL;
- twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
- lppllctl &= ~TWL6040_LPLLENA;
- twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
+ twl6040_reg_write(twl6040, TWL6040_REG_HPPLLCTL,
+ hppllctl);
+ usleep_range(500, 700);
+ lppllctl |= TWL6040_HPLLSEL;
+ twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
+ lppllctl);
+ lppllctl &= ~TWL6040_LPLLENA;
+ twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
+ lppllctl);
+ }
break;
default:
dev_err(twl6040->dev, "unknown pll id %d\n", pll_id);
}
twl6040->sysclk = freq_out;
+ twl6040->mclk = freq_in;
twl6040->pll = pll_id;
pll_out:
static void lkdtm_handler(void)
{
unsigned long flags;
+ bool do_it = false;
spin_lock_irqsave(&count_lock, flags);
count--;
cp_name_to_str(cpoint), cp_type_to_str(cptype), count);
if (count == 0) {
- lkdtm_do_action(cptype);
+ do_it = true;
count = cpoint_count;
}
spin_unlock_irqrestore(&count_lock, flags);
+
+ if (do_it)
+ lkdtm_do_action(cptype);
}
static int lkdtm_register_cpoint(enum cname which)
{
struct mtd_info *mtd = dev_get_drvdata(dev);
- return mtd_suspend(mtd);
+ return mtd ? mtd_suspend(mtd) : 0;
}
static int mtd_cls_resume(struct device *dev)
!!host->board->rdy_pin_active_low;
}
+/*
+ * Minimal-overhead PIO for data access.
+ */
+static void atmel_read_buf8(struct mtd_info *mtd, u8 *buf, int len)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+
+ __raw_readsb(nand_chip->IO_ADDR_R, buf, len);
+}
+
+static void atmel_read_buf16(struct mtd_info *mtd, u8 *buf, int len)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+
+ __raw_readsw(nand_chip->IO_ADDR_R, buf, len / 2);
+}
+
+static void atmel_write_buf8(struct mtd_info *mtd, const u8 *buf, int len)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+
+ __raw_writesb(nand_chip->IO_ADDR_W, buf, len);
+}
+
+static void atmel_write_buf16(struct mtd_info *mtd, const u8 *buf, int len)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+
+ __raw_writesw(nand_chip->IO_ADDR_W, buf, len / 2);
+}
+
static void dma_complete_func(void *completion)
{
complete(completion);
static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len)
{
struct nand_chip *chip = mtd->priv;
+ struct atmel_nand_host *host = chip->priv;
if (use_dma && len > mtd->oobsize)
/* only use DMA for bigger than oob size: better performances */
if (atmel_nand_dma_op(mtd, buf, len, 1) == 0)
return;
- /* if no DMA operation possible, use PIO */
- memcpy_fromio(buf, chip->IO_ADDR_R, len);
+ if (host->board->bus_width_16)
+ atmel_read_buf16(mtd, buf, len);
+ else
+ atmel_read_buf8(mtd, buf, len);
}
static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
{
struct nand_chip *chip = mtd->priv;
+ struct atmel_nand_host *host = chip->priv;
if (use_dma && len > mtd->oobsize)
/* only use DMA for bigger than oob size: better performances */
if (atmel_nand_dma_op(mtd, (void *)buf, len, 0) == 0)
return;
- /* if no DMA operation possible, use PIO */
- memcpy_toio(chip->IO_ADDR_W, buf, len);
+ if (host->board->bus_width_16)
+ atmel_write_buf16(mtd, buf, len);
+ else
+ atmel_write_buf8(mtd, buf, len);
}
/*
* [1] enable the module.
* [2] reset the module.
*
- * In most of the cases, it's ok. But there is a hardware bug in the BCH block.
+ * In most of the cases, it's ok.
+ * But in MX23, there is a hardware bug in the BCH block (see erratum #2847).
* If you try to soft reset the BCH block, it becomes unusable until
* the next hard reset. This case occurs in the NAND boot mode. When the board
* boots by NAND, the ROM of the chip will initialize the BCH blocks itself.
* So If the driver tries to reset the BCH again, the BCH will not work anymore.
- * You will see a DMA timeout in this case.
+ * You will see a DMA timeout in this case. The bug has been fixed
+ * in the following chips, such as MX28.
*
* To avoid this bug, just add a new parameter `just_enable` for
* the mxs_reset_block(), and rewrite it here.
*/
-int gpmi_reset_block(void __iomem *reset_addr, bool just_enable)
+static int gpmi_reset_block(void __iomem *reset_addr, bool just_enable)
{
int ret;
int timeout = 0x400;
if (ret)
goto err_out;
- ret = gpmi_reset_block(r->bch_regs, true);
+ /*
+ * Due to erratum #2847 of the MX23, the BCH cannot be soft reset on this
+ * chip, otherwise it will lock up. So we skip resetting BCH on the MX23.
+ * On the other hand, the MX28 needs the reset, because one case has been
+ * seen where the BCH produced ECC errors constantly after 10000
+ * consecutive reboots. The latter case has not been seen on the MX23 yet,
+ * still we don't know if it could happen there as well.
+ */
+ ret = gpmi_reset_block(r->bch_regs, GPMI_IS_MX23(this));
if (ret)
goto err_out;
instr->state = MTD_ERASING;
while (len) {
- /* Heck if we have a bad block, we do not erase bad blocks! */
+ /* Check if we have a bad block, we do not erase bad blocks! */
if (nand_block_checkbad(mtd, ((loff_t) page) <<
chip->page_shift, 0, allowbbt)) {
pr_warn("%s: attempt to erase a bad block at page 0x%08x\n",
static int pcmcia_bus_early_resume(struct pcmcia_socket *skt)
{
- if (!verify_cis_cache(skt)) {
- pcmcia_put_socket(skt);
+ if (!verify_cis_cache(skt))
return 0;
- }
dev_dbg(&skt->dev, "cis mismatch - different card\n");
config SPI_S3C64XX
tristate "Samsung S3C64XX series type SPI"
- depends on (ARCH_S3C64XX || ARCH_S5P64X0)
+ depends on (ARCH_S3C64XX || ARCH_S5P64X0 || ARCH_EXYNOS)
select S3C64XX_DMA if ARCH_S3C64XX
help
SPI driver for Samsung S3C64XX and newer SoCs.
#endif
-static struct pci_driver pch_spi_pcidev = {
+static struct pci_driver pch_spi_pcidev_driver = {
.name = "pch_spi",
.id_table = pch_spi_pcidev_id,
.probe = pch_spi_probe,
if (ret)
return ret;
- ret = pci_register_driver(&pch_spi_pcidev);
+ ret = pci_register_driver(&pch_spi_pcidev_driver);
if (ret)
return ret;
static void __exit pch_spi_exit(void)
{
- pci_unregister_driver(&pch_spi_pcidev);
+ pci_unregister_driver(&pch_spi_pcidev_driver);
platform_driver_unregister(&pch_spi_pd_driver);
}
module_exit(pch_spi_exit);
};
module_usb_driver(go7007_usb_driver);
+MODULE_LICENSE("GPL v2");
if (ret < 0)
return iscsit_add_reject_from_cmd(
ISCSI_REASON_BOOKMARK_NO_RESOURCES,
- 1, 1, buf, cmd);
+ 1, 0, buf, cmd);
/*
* Check the CmdSN against ExpCmdSN/MaxCmdSN here if
* the Immediate Bit is not set, and no Immediate
return 0;
}
+static bool iscsit_check_inaddr_any(struct iscsi_np *np)
+{
+ bool ret = false;
+
+ if (np->np_sockaddr.ss_family == AF_INET6) {
+ const struct sockaddr_in6 sin6 = {
+ .sin6_addr = IN6ADDR_ANY_INIT };
+ struct sockaddr_in6 *sock_in6 =
+ (struct sockaddr_in6 *)&np->np_sockaddr;
+
+ if (!memcmp(sock_in6->sin6_addr.s6_addr,
+ sin6.sin6_addr.s6_addr, 16))
+ ret = true;
+ } else {
+ struct sockaddr_in * sock_in =
+ (struct sockaddr_in *)&np->np_sockaddr;
+
+ if (sock_in->sin_addr.s_addr == INADDR_ANY)
+ ret = true;
+ }
+
+ return ret;
+}
+
static int iscsit_build_sendtargets_response(struct iscsi_cmd *cmd)
{
char *payload = NULL;
spin_lock(&tpg->tpg_np_lock);
list_for_each_entry(tpg_np, &tpg->tpg_gnp_list,
tpg_np_list) {
+ struct iscsi_np *np = tpg_np->tpg_np;
+ bool inaddr_any = iscsit_check_inaddr_any(np);
+
len = sprintf(buf, "TargetAddress="
"%s%s%s:%hu,%hu",
- (tpg_np->tpg_np->np_sockaddr.ss_family == AF_INET6) ?
- "[" : "", tpg_np->tpg_np->np_ip,
- (tpg_np->tpg_np->np_sockaddr.ss_family == AF_INET6) ?
- "]" : "", tpg_np->tpg_np->np_port,
+ (np->np_sockaddr.ss_family == AF_INET6) ?
+ "[" : "", (inaddr_any == false) ?
+ np->np_ip : conn->local_ip,
+ (np->np_sockaddr.ss_family == AF_INET6) ?
+ "]" : "", (inaddr_any == false) ?
+ np->np_port : conn->local_port,
tpg->tpgt);
len += 1;
#include <linux/configfs.h>
#include <linux/export.h>
+#include <linux/inet.h>
#include <target/target_core_base.h>
#include <target/target_core_fabric.h>
#include <target/target_core_fabric_configfs.h>
u16 cid;
/* Remote TCP Port */
u16 login_port;
+ u16 local_port;
int net_size;
u32 auth_id;
#define CONNFLAG_SCTP_STRUCT_FILE 0x01
unsigned char bad_hdr[ISCSI_HDR_LEN];
#define IPV6_ADDRESS_SPACE 48
unsigned char login_ip[IPV6_ADDRESS_SPACE];
+ unsigned char local_ip[IPV6_ADDRESS_SPACE];
int conn_usage_count;
int conn_waiting_on_uc;
atomic_t check_immediate_queue;
struct hash_desc conn_tx_hash;
/* Used for scheduling TX and RX connection kthreads */
cpumask_var_t conn_cpumask;
- int conn_rx_reset_cpumask:1;
- int conn_tx_reset_cpumask:1;
+ unsigned int conn_rx_reset_cpumask:1;
+ unsigned int conn_tx_reset_cpumask:1;
/* list_head of struct iscsi_cmd for this connection */
struct list_head conn_cmd_list;
struct list_head immed_queue_list;
{
struct iscsi_conn *conn = cmd->conn;
struct iscsi_session *sess = conn->sess;
- struct iscsi_node_attrib *na = na = iscsit_tpg_get_node_attrib(sess);
+ struct iscsi_node_attrib *na = iscsit_tpg_get_node_attrib(sess);
spin_lock_bh(&cmd->dataout_timeout_lock);
if (!(cmd->dataout_timer_flags & ISCSI_TF_RUNNING)) {
struct iscsi_conn *conn)
{
struct iscsi_session *sess = conn->sess;
- struct iscsi_node_attrib *na = na = iscsit_tpg_get_node_attrib(sess);
+ struct iscsi_node_attrib *na = iscsit_tpg_get_node_attrib(sess);
if (cmd->dataout_timer_flags & ISCSI_TF_RUNNING)
return;
}
pr_debug("iSCSI Login successful on CID: %hu from %s to"
- " %s:%hu,%hu\n", conn->cid, conn->login_ip, np->np_ip,
- np->np_port, tpg->tpgt);
+ " %s:%hu,%hu\n", conn->cid, conn->login_ip,
+ conn->local_ip, conn->local_port, tpg->tpgt);
list_add_tail(&conn->conn_list, &sess->sess_conn_list);
atomic_inc(&sess->nconn);
sess->session_state = TARG_SESS_STATE_LOGGED_IN;
pr_debug("iSCSI Login successful on CID: %hu from %s to %s:%hu,%hu\n",
- conn->cid, conn->login_ip, np->np_ip, np->np_port, tpg->tpgt);
+ conn->cid, conn->login_ip, conn->local_ip, conn->local_port,
+ tpg->tpgt);
spin_lock_bh(&sess->conn_lock);
list_add_tail(&conn->conn_list, &sess->sess_conn_list);
goto fail;
}
+ ret = kernel_setsockopt(sock, IPPROTO_IP, IP_FREEBIND,
+ (char *)&opt, sizeof(opt));
+ if (ret < 0) {
+ pr_err("kernel_setsockopt() for IP_FREEBIND"
+ " failed\n");
+ goto fail;
+ }
+
ret = kernel_bind(sock, (struct sockaddr *)&np->np_sockaddr, len);
if (ret < 0) {
pr_err("kernel_bind() failed: %d\n", ret);
snprintf(conn->login_ip, sizeof(conn->login_ip), "%pI6c",
&sock_in6.sin6_addr.in6_u);
conn->login_port = ntohs(sock_in6.sin6_port);
+
+ if (conn->sock->ops->getname(conn->sock,
+ (struct sockaddr *)&sock_in6, &err, 0) < 0) {
+ pr_err("sock_ops->getname() failed.\n");
+ iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR,
+ ISCSI_LOGIN_STATUS_TARGET_ERROR);
+ goto new_sess_out;
+ }
+ snprintf(conn->local_ip, sizeof(conn->local_ip), "%pI6c",
+ &sock_in6.sin6_addr.in6_u);
+ conn->local_port = ntohs(sock_in6.sin6_port);
+
} else {
memset(&sock_in, 0, sizeof(struct sockaddr_in));
}
sprintf(conn->login_ip, "%pI4", &sock_in.sin_addr.s_addr);
conn->login_port = ntohs(sock_in.sin_port);
+
+ if (conn->sock->ops->getname(conn->sock,
+ (struct sockaddr *)&sock_in, &err, 0) < 0) {
+ pr_err("sock_ops->getname() failed.\n");
+ iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR,
+ ISCSI_LOGIN_STATUS_TARGET_ERROR);
+ goto new_sess_out;
+ }
+ sprintf(conn->local_ip, "%pI4", &sock_in.sin_addr.s_addr);
+ conn->local_port = ntohs(sock_in.sin_port);
}
conn->network_transport = np->np_network_transport;
pr_debug("Received iSCSI login request from %s on %s Network"
" Portal %s:%hu\n", conn->login_ip,
(conn->network_transport == ISCSI_TCP) ? "TCP" : "SCTP",
- np->np_ip, np->np_port);
+ conn->local_ip, conn->local_port);
pr_debug("Moving to TARG_CONN_STATE_IN_LOGIN.\n");
conn->conn_state = TARG_CONN_STATE_IN_LOGIN;
case ISCSI_OP_SCSI_TMFUNC:
transport_generic_free_cmd(&cmd->se_cmd, 1);
break;
+ case ISCSI_OP_REJECT:
+ /*
+ * Handle special case for REJECT when iscsi_add_reject*() has
+ * overwritten the original iscsi_opcode assignment, and the
+ * associated cmd->se_cmd needs to be released.
+ */
+ if (cmd->se_cmd.se_tfo != NULL) {
+ transport_generic_free_cmd(&cmd->se_cmd, 1);
+ break;
+ }
+ /* Fall-through */
default:
iscsit_release_cmd(cmd);
break;
return -EINVAL;
}
- buf = transport_kmap_first_data_page(cmd);
+ buf = transport_kmap_data_sg(cmd);
spin_lock(&su_dev->t10_alua.tg_pt_gps_lock);
list_for_each_entry(tg_pt_gp, &su_dev->t10_alua.tg_pt_gps_list,
buf[2] = ((rd_len >> 8) & 0xff);
buf[3] = (rd_len & 0xff);
- transport_kunmap_first_data_page(cmd);
+ transport_kunmap_data_sg(cmd);
task->task_scsi_status = GOOD;
transport_complete_task(task, 1);
cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
return -EINVAL;
}
- buf = transport_kmap_first_data_page(cmd);
+ buf = transport_kmap_data_sg(cmd);
/*
* Determine if explict ALUA via SET_TARGET_PORT_GROUPS is allowed
}
out:
- transport_kunmap_first_data_page(cmd);
+ transport_kunmap_data_sg(cmd);
task->task_scsi_status = GOOD;
transport_complete_task(task, 1);
return 0;
return -EINVAL;
}
- buf = transport_kmap_first_data_page(cmd);
+ buf = transport_kmap_data_sg(cmd);
if (dev == tpg->tpg_virt_lun0.lun_se_dev) {
buf[0] = 0x3f; /* Not connected */
buf[4] = 31; /* Set additional length to 31 */
out:
- transport_kunmap_first_data_page(cmd);
+ transport_kunmap_data_sg(cmd);
return 0;
}
int p, ret;
if (!(cdb[1] & 0x1)) {
+ if (cdb[2]) {
+ pr_err("INQUIRY with EVPD==0 but PAGE CODE=%02x\n",
+ cdb[2]);
+ cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD;
+ return -EINVAL;
+ }
+
ret = target_emulate_inquiry_std(cmd);
goto out;
}
return -EINVAL;
}
- buf = transport_kmap_first_data_page(cmd);
+ buf = transport_kmap_data_sg(cmd);
buf[0] = dev->transport->get_device_type(dev);
}
pr_err("Unknown VPD Code: 0x%02x\n", cdb[2]);
- cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE;
+ cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD;
ret = -EINVAL;
out_unmap:
- transport_kunmap_first_data_page(cmd);
+ transport_kunmap_data_sg(cmd);
out:
if (!ret) {
task->task_scsi_status = GOOD;
else
blocks = (u32)blocks_long;
- buf = transport_kmap_first_data_page(cmd);
+ buf = transport_kmap_data_sg(cmd);
buf[0] = (blocks >> 24) & 0xff;
buf[1] = (blocks >> 16) & 0xff;
if (dev->se_sub_dev->se_dev_attrib.emulate_tpu || dev->se_sub_dev->se_dev_attrib.emulate_tpws)
put_unaligned_be32(0xFFFFFFFF, &buf[0]);
- transport_kunmap_first_data_page(cmd);
+ transport_kunmap_data_sg(cmd);
task->task_scsi_status = GOOD;
transport_complete_task(task, 1);
unsigned char *buf;
unsigned long long blocks = dev->transport->get_blocks(dev);
- buf = transport_kmap_first_data_page(cmd);
+ buf = transport_kmap_data_sg(cmd);
buf[0] = (blocks >> 56) & 0xff;
buf[1] = (blocks >> 48) & 0xff;
if (dev->se_sub_dev->se_dev_attrib.emulate_tpu || dev->se_sub_dev->se_dev_attrib.emulate_tpws)
buf[14] = 0x80;
- transport_kunmap_first_data_page(cmd);
+ transport_kunmap_data_sg(cmd);
task->task_scsi_status = GOOD;
transport_complete_task(task, 1);
offset = cmd->data_length;
}
- rbuf = transport_kmap_first_data_page(cmd);
+ rbuf = transport_kmap_data_sg(cmd);
memcpy(rbuf, buf, offset);
- transport_kunmap_first_data_page(cmd);
+ transport_kunmap_data_sg(cmd);
task->task_scsi_status = GOOD;
transport_complete_task(task, 1);
return -ENOSYS;
}
- buf = transport_kmap_first_data_page(cmd);
+ buf = transport_kmap_data_sg(cmd);
if (!core_scsi3_ua_clear_for_request_sense(cmd, &ua_asc, &ua_ascq)) {
/*
*/
buf[0] = 0x70;
buf[SPC_SENSE_KEY_OFFSET] = UNIT_ATTENTION;
- /*
- * Make sure request data length is enough for additional
- * sense data.
- */
- if (cmd->data_length <= 18) {
+
+ if (cmd->data_length < 18) {
buf[7] = 0x00;
err = -EINVAL;
goto end;
*/
buf[0] = 0x70;
buf[SPC_SENSE_KEY_OFFSET] = NO_SENSE;
- /*
- * Make sure request data length is enough for additional
- * sense data.
- */
- if (cmd->data_length <= 18) {
+
+ if (cmd->data_length < 18) {
buf[7] = 0x00;
err = -EINVAL;
goto end;
}
end:
- transport_kunmap_first_data_page(cmd);
+ transport_kunmap_data_sg(cmd);
task->task_scsi_status = GOOD;
transport_complete_task(task, 1);
return 0;
dl = get_unaligned_be16(&cdb[0]);
bd_dl = get_unaligned_be16(&cdb[2]);
- buf = transport_kmap_first_data_page(cmd);
+ buf = transport_kmap_data_sg(cmd);
ptr = &buf[offset];
pr_debug("UNMAP: Sub: %s Using dl: %hu bd_dl: %hu size: %hu"
}
err:
- transport_kunmap_first_data_page(cmd);
+ transport_kunmap_data_sg(cmd);
if (!ret) {
task->task_scsi_status = GOOD;
transport_complete_task(task, 1);
return -EINVAL;
}
- se_dev->su_dev_flags |= SDF_USING_ALIAS;
read_bytes = snprintf(&se_dev->se_dev_alias[0], SE_DEV_ALIAS_LEN,
"%s", page);
-
+ if (!read_bytes)
+ return -EINVAL;
if (se_dev->se_dev_alias[read_bytes - 1] == '\n')
se_dev->se_dev_alias[read_bytes - 1] = '\0';
+ se_dev->su_dev_flags |= SDF_USING_ALIAS;
+
pr_debug("Target_Core_ConfigFS: %s/%s set alias: %s\n",
config_item_name(&hba->hba_group.cg_item),
config_item_name(&se_dev->se_dev_group.cg_item),
return -EINVAL;
}
- se_dev->su_dev_flags |= SDF_USING_UDEV_PATH;
read_bytes = snprintf(&se_dev->se_dev_udev_path[0], SE_UDEV_PATH_LEN,
"%s", page);
-
+ if (!read_bytes)
+ return -EINVAL;
if (se_dev->se_dev_udev_path[read_bytes - 1] == '\n')
se_dev->se_dev_udev_path[read_bytes - 1] = '\0';
+ se_dev->su_dev_flags |= SDF_USING_UDEV_PATH;
+
pr_debug("Target_Core_ConfigFS: %s/%s set udev_path: %s\n",
config_item_name(&hba->hba_group.cg_item),
config_item_name(&se_dev->se_dev_group.cg_item),
void core_dec_lacl_count(struct se_node_acl *se_nacl, struct se_cmd *se_cmd)
{
struct se_dev_entry *deve;
+ unsigned long flags;
- spin_lock_irq(&se_nacl->device_list_lock);
+ spin_lock_irqsave(&se_nacl->device_list_lock, flags);
deve = &se_nacl->device_list[se_cmd->orig_fe_lun];
deve->deve_cmds--;
- spin_unlock_irq(&se_nacl->device_list_lock);
+ spin_unlock_irqrestore(&se_nacl->device_list_lock, flags);
}
void core_update_device_list_access(
unsigned char *buf;
u32 cdb_offset = 0, lun_count = 0, offset = 8, i;
- buf = transport_kmap_first_data_page(se_cmd);
+ buf = (unsigned char *) transport_kmap_data_sg(se_cmd);
/*
* If no struct se_session pointer is present, this struct se_cmd is
* See SPC3 r07, page 159.
*/
done:
- transport_kunmap_first_data_page(se_cmd);
+ transport_kunmap_data_sg(se_cmd);
lun_count *= 8;
buf[0] = ((lun_count >> 24) & 0xff);
buf[1] = ((lun_count >> 16) & 0xff);
{
struct se_lun *lun_p;
u32 lun_access = 0;
+ int rc;
if (atomic_read(&dev->dev_access_obj.obj_access_count) != 0) {
pr_err("Unable to export struct se_device while dev_access_obj: %d\n",
atomic_read(&dev->dev_access_obj.obj_access_count));
- return NULL;
+ return ERR_PTR(-EACCES);
}
lun_p = core_tpg_pre_addlun(tpg, lun);
- if ((IS_ERR(lun_p)) || !lun_p)
- return NULL;
+ if (IS_ERR(lun_p))
+ return lun_p;
if (dev->dev_flags & DF_READ_ONLY)
lun_access = TRANSPORT_LUNFLAGS_READ_ONLY;
else
lun_access = TRANSPORT_LUNFLAGS_READ_WRITE;
- if (core_tpg_post_addlun(tpg, lun_p, lun_access, dev) < 0)
- return NULL;
+ rc = core_tpg_post_addlun(tpg, lun_p, lun_access, dev);
+ if (rc < 0)
+ return ERR_PTR(rc);
pr_debug("%s_TPG[%u]_LUN[%u] - Activated %s Logical Unit from"
" CORE HBA: %u\n", tpg->se_tpg_tfo->get_fabric_name(),
u32 unpacked_lun)
{
struct se_lun *lun;
- int ret = 0;
- lun = core_tpg_pre_dellun(tpg, unpacked_lun, &ret);
- if (!lun)
- return ret;
+ lun = core_tpg_pre_dellun(tpg, unpacked_lun);
+ if (IS_ERR(lun))
+ return PTR_ERR(lun);
core_tpg_post_dellun(tpg, lun);
lun_p = core_dev_add_lun(se_tpg, dev->se_hba, dev,
lun->unpacked_lun);
- if (IS_ERR(lun_p) || !lun_p) {
+ if (IS_ERR(lun_p)) {
pr_err("core_dev_add_lun() failed\n");
- ret = -EINVAL;
+ ret = PTR_ERR(lun_p);
goto out;
}
/*
* These settings need to be made tunable..
*/
- ib_dev->ibd_bio_set = bioset_create(32, 64);
+ ib_dev->ibd_bio_set = bioset_create(32, 0);
if (!ib_dev->ibd_bio_set) {
pr_err("IBLOCK: Unable to create bioset()\n");
return ERR_PTR(-ENOMEM);
*/
dev->se_sub_dev->se_dev_attrib.max_unmap_block_desc_count = 1;
dev->se_sub_dev->se_dev_attrib.unmap_granularity =
- q->limits.discard_granularity;
+ q->limits.discard_granularity >> 9;
dev->se_sub_dev->se_dev_attrib.unmap_granularity_alignment =
q->limits.discard_alignment;
struct iblock_req *ib_req = IBLOCK_REQ(task);
struct bio *bio;
+ /*
+ * Only allocate as many vector entries as the bio code allows us to,
+ * we'll loop later on until we have handled the whole request.
+ */
+ if (sg_num > BIO_MAX_PAGES)
+ sg_num = BIO_MAX_PAGES;
+
bio = bio_alloc_bioset(GFP_NOIO, sg_num, ib_dev->ibd_bio_set);
if (!bio) {
pr_err("Unable to allocate memory for bio\n");
struct se_lun *core_tpg_pre_addlun(struct se_portal_group *, u32);
int core_tpg_post_addlun(struct se_portal_group *, struct se_lun *,
u32, void *);
-struct se_lun *core_tpg_pre_dellun(struct se_portal_group *, u32, int *);
+struct se_lun *core_tpg_pre_dellun(struct se_portal_group *, u32 unpacked_lun);
int core_tpg_post_dellun(struct se_portal_group *, struct se_lun *);
/* target_core_transport.c */
case READ_MEDIA_SERIAL_NUMBER:
case REPORT_LUNS:
case REQUEST_SENSE:
+ case PERSISTENT_RESERVE_IN:
ret = 0; /*/ Allowed CDBs */
break;
default:
tidh_new->dest_local_nexus = 1;
list_add_tail(&tidh_new->dest_list, &tid_dest_list);
- buf = transport_kmap_first_data_page(cmd);
+ buf = transport_kmap_data_sg(cmd);
/*
* For a PERSISTENT RESERVE OUT specify initiator ports payload,
* first extract TransportID Parameter Data Length, and make sure
}
- transport_kunmap_first_data_page(cmd);
+ transport_kunmap_data_sg(cmd);
/*
* Go ahead and create a registrations from tid_dest_list for the
return 0;
out:
- transport_kunmap_first_data_page(cmd);
+ transport_kunmap_data_sg(cmd);
/*
* For the failure case, release everything from tid_dest_list
* including *dest_pr_reg and the configfs dependances..
if (!calling_it_nexus)
core_scsi3_ua_allocate(pr_reg_nacl,
pr_res_mapped_lun, 0x2A,
- ASCQ_2AH_RESERVATIONS_PREEMPTED);
+ ASCQ_2AH_REGISTRATIONS_PREEMPTED);
}
spin_unlock(&pr_tmpl->registration_lock);
/*
* additional sense code set to REGISTRATIONS PREEMPTED;
*/
core_scsi3_ua_allocate(pr_reg_nacl, pr_res_mapped_lun, 0x2A,
- ASCQ_2AH_RESERVATIONS_PREEMPTED);
+ ASCQ_2AH_REGISTRATIONS_PREEMPTED);
}
spin_unlock(&pr_tmpl->registration_lock);
/*
* will be moved to for the TransportID containing SCSI initiator WWN
* information.
*/
- buf = transport_kmap_first_data_page(cmd);
+ buf = transport_kmap_data_sg(cmd);
rtpi = (buf[18] & 0xff) << 8;
rtpi |= buf[19] & 0xff;
tid_len = (buf[20] & 0xff) << 24;
tid_len |= (buf[21] & 0xff) << 16;
tid_len |= (buf[22] & 0xff) << 8;
tid_len |= buf[23] & 0xff;
- transport_kunmap_first_data_page(cmd);
+ transport_kunmap_data_sg(cmd);
buf = NULL;
if ((tid_len + 24) != cmd->data_length) {
return -EINVAL;
}
- buf = transport_kmap_first_data_page(cmd);
+ buf = transport_kmap_data_sg(cmd);
proto_ident = (buf[24] & 0x0f);
#if 0
pr_debug("SPC-3 PR REGISTER_AND_MOVE: Extracted Protocol Identifier:"
goto out;
}
- transport_kunmap_first_data_page(cmd);
+ transport_kunmap_data_sg(cmd);
buf = NULL;
pr_debug("SPC-3 PR [%s] Extracted initiator %s identifier: %s"
" REGISTER_AND_MOVE\n");
}
- transport_kunmap_first_data_page(cmd);
+ transport_kunmap_data_sg(cmd);
core_scsi3_put_pr_reg(dest_pr_reg);
return 0;
out:
if (buf)
- transport_kunmap_first_data_page(cmd);
+ transport_kunmap_data_sg(cmd);
if (dest_se_deve)
core_scsi3_lunacl_undepend_item(dest_se_deve);
if (dest_node_acl)
scope = (cdb[2] & 0xf0);
type = (cdb[2] & 0x0f);
- buf = transport_kmap_first_data_page(cmd);
+ buf = transport_kmap_data_sg(cmd);
/*
* From PERSISTENT_RESERVE_OUT parameter list (payload)
*/
aptpl = (buf[17] & 0x01);
unreg = (buf[17] & 0x02);
}
- transport_kunmap_first_data_page(cmd);
+ transport_kunmap_data_sg(cmd);
buf = NULL;
/*
return -EINVAL;
}
- buf = transport_kmap_first_data_page(cmd);
+ buf = transport_kmap_data_sg(cmd);
buf[0] = ((su_dev->t10_pr.pr_generation >> 24) & 0xff);
buf[1] = ((su_dev->t10_pr.pr_generation >> 16) & 0xff);
buf[2] = ((su_dev->t10_pr.pr_generation >> 8) & 0xff);
buf[6] = ((add_len >> 8) & 0xff);
buf[7] = (add_len & 0xff);
- transport_kunmap_first_data_page(cmd);
+ transport_kunmap_data_sg(cmd);
return 0;
}
return -EINVAL;
}
- buf = transport_kmap_first_data_page(cmd);
+ buf = transport_kmap_data_sg(cmd);
buf[0] = ((su_dev->t10_pr.pr_generation >> 24) & 0xff);
buf[1] = ((su_dev->t10_pr.pr_generation >> 16) & 0xff);
buf[2] = ((su_dev->t10_pr.pr_generation >> 8) & 0xff);
err:
spin_unlock(&se_dev->dev_reservation_lock);
- transport_kunmap_first_data_page(cmd);
+ transport_kunmap_data_sg(cmd);
return 0;
}
return -EINVAL;
}
- buf = transport_kmap_first_data_page(cmd);
+ buf = transport_kmap_data_sg(cmd);
buf[0] = ((add_len << 8) & 0xff);
buf[1] = (add_len & 0xff);
buf[4] |= 0x02; /* PR_TYPE_WRITE_EXCLUSIVE */
buf[5] |= 0x01; /* PR_TYPE_EXCLUSIVE_ACCESS_ALLREG */
- transport_kunmap_first_data_page(cmd);
+ transport_kunmap_data_sg(cmd);
return 0;
}
return -EINVAL;
}
- buf = transport_kmap_first_data_page(cmd);
+ buf = transport_kmap_data_sg(cmd);
buf[0] = ((su_dev->t10_pr.pr_generation >> 24) & 0xff);
buf[1] = ((su_dev->t10_pr.pr_generation >> 16) & 0xff);
buf[6] = ((add_len >> 8) & 0xff);
buf[7] = (add_len & 0xff);
- transport_kunmap_first_data_page(cmd);
+ transport_kunmap_data_sg(cmd);
return 0;
}
if (task->task_se_cmd->se_deve->lun_flags &
TRANSPORT_LUNFLAGS_READ_ONLY) {
- unsigned char *buf = transport_kmap_first_data_page(task->task_se_cmd);
+ unsigned char *buf = transport_kmap_data_sg(task->task_se_cmd);
if (cdb[0] == MODE_SENSE_10) {
if (!(buf[3] & 0x80))
buf[2] |= 0x80;
}
- transport_kunmap_first_data_page(task->task_se_cmd);
+ transport_kunmap_data_sg(task->task_se_cmd);
}
}
after_mode_sense:
struct se_lun *core_tpg_pre_dellun(
struct se_portal_group *tpg,
- u32 unpacked_lun,
- int *ret)
+ u32 unpacked_lun)
{
struct se_lun *lun;
static void scsi_dump_inquiry(struct se_device *dev)
{
struct t10_wwn *wwn = &dev->se_sub_dev->t10_wwn;
+ char buf[17];
int i, device_type;
/*
* Print Linux/SCSI style INQUIRY formatting to the kernel ring buffer
*/
- pr_debug(" Vendor: ");
for (i = 0; i < 8; i++)
if (wwn->vendor[i] >= 0x20)
- pr_debug("%c", wwn->vendor[i]);
+ buf[i] = wwn->vendor[i];
else
- pr_debug(" ");
+ buf[i] = ' ';
+ buf[i] = '\0';
+ pr_debug(" Vendor: %s\n", buf);
- pr_debug(" Model: ");
for (i = 0; i < 16; i++)
if (wwn->model[i] >= 0x20)
- pr_debug("%c", wwn->model[i]);
+ buf[i] = wwn->model[i];
else
- pr_debug(" ");
+ buf[i] = ' ';
+ buf[i] = '\0';
+ pr_debug(" Model: %s\n", buf);
- pr_debug(" Revision: ");
for (i = 0; i < 4; i++)
if (wwn->revision[i] >= 0x20)
- pr_debug("%c", wwn->revision[i]);
+ buf[i] = wwn->revision[i];
else
- pr_debug(" ");
-
- pr_debug("\n");
+ buf[i] = ' ';
+ buf[i] = '\0';
+ pr_debug(" Revision: %s\n", buf);
device_type = dev->transport->get_device_type(dev);
pr_debug(" Type: %s ", scsi_device_type(device_type));
* This may only be called from process context, and also currently
* assumes internal allocation of fabric payload buffer by target-core.
**/
-int target_submit_cmd(struct se_cmd *se_cmd, struct se_session *se_sess,
+void target_submit_cmd(struct se_cmd *se_cmd, struct se_session *se_sess,
unsigned char *cdb, unsigned char *sense, u32 unpacked_lun,
u32 data_length, int task_attr, int data_dir, int flags)
{
/*
* Locate se_lun pointer and attach it to struct se_cmd
*/
- if (transport_lookup_cmd_lun(se_cmd, unpacked_lun) < 0)
- goto out_check_cond;
+ if (transport_lookup_cmd_lun(se_cmd, unpacked_lun) < 0) {
+ transport_send_check_condition_and_sense(se_cmd,
+ se_cmd->scsi_sense_reason, 0);
+ target_put_sess_cmd(se_sess, se_cmd);
+ return;
+ }
/*
* Sanitize CDBs via transport_generic_cmd_sequencer() and
* allocate the necessary tasks to complete the received CDB+data
*/
rc = transport_generic_allocate_tasks(se_cmd, cdb);
- if (rc != 0)
- goto out_check_cond;
+ if (rc != 0) {
+ transport_generic_request_failure(se_cmd);
+ return;
+ }
/*
* Dispatch se_cmd descriptor to se_lun->lun_se_dev backend
* for immediate execution of READs, otherwise wait for
* when fabric has filled the incoming buffer.
*/
transport_handle_cdb_direct(se_cmd);
- return 0;
-
-out_check_cond:
- transport_send_check_condition_and_sense(se_cmd,
- se_cmd->scsi_sense_reason, 0);
- return 0;
+ return;
}
EXPORT_SYMBOL(target_submit_cmd);
cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
if (target_check_write_same_discard(&cdb[10], dev) < 0)
- goto out_invalid_cdb_field;
+ goto out_unsupported_cdb;
if (!passthrough)
cmd->execute_task = target_emulate_write_same;
break;
cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
if (target_check_write_same_discard(&cdb[1], dev) < 0)
- goto out_invalid_cdb_field;
+ goto out_unsupported_cdb;
if (!passthrough)
cmd->execute_task = target_emulate_write_same;
break;
* of byte 1 bit 3 UNMAP instead of original reserved field
*/
if (target_check_write_same_discard(&cdb[1], dev) < 0)
- goto out_invalid_cdb_field;
+ goto out_unsupported_cdb;
if (!passthrough)
cmd->execute_task = target_emulate_write_same;
break;
(cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB)))
goto out_unsupported_cdb;
- /* Let's limit control cdbs to a page, for simplicity's sake. */
- if ((cmd->se_cmd_flags & SCF_SCSI_CONTROL_SG_IO_CDB) &&
- size > PAGE_SIZE)
- goto out_invalid_cdb_field;
-
transport_set_supported_SAM_opcode(cmd);
return ret;
}
EXPORT_SYMBOL(transport_generic_map_mem_to_cmd);
-void *transport_kmap_first_data_page(struct se_cmd *cmd)
+void *transport_kmap_data_sg(struct se_cmd *cmd)
{
struct scatterlist *sg = cmd->t_data_sg;
+ struct page **pages;
+ int i;
BUG_ON(!sg);
/*
* tcm_loop who may be using a contig buffer from the SCSI midlayer for
* control CDBs passed as SGLs via transport_generic_map_mem_to_cmd()
*/
- return kmap(sg_page(sg)) + sg->offset;
+ if (!cmd->t_data_nents)
+ return NULL;
+ else if (cmd->t_data_nents == 1)
+ return kmap(sg_page(sg)) + sg->offset;
+
+ /* >1 page. use vmap */
+ pages = kmalloc(sizeof(*pages) * cmd->t_data_nents, GFP_KERNEL);
+ if (!pages)
+ return NULL;
+
+ /* convert sg[] to pages[] */
+ for_each_sg(cmd->t_data_sg, sg, cmd->t_data_nents, i) {
+ pages[i] = sg_page(sg);
+ }
+
+ cmd->t_data_vmap = vmap(pages, cmd->t_data_nents, VM_MAP, PAGE_KERNEL);
+ kfree(pages);
+ if (!cmd->t_data_vmap)
+ return NULL;
+
+ return cmd->t_data_vmap + cmd->t_data_sg[0].offset;
}
-EXPORT_SYMBOL(transport_kmap_first_data_page);
+EXPORT_SYMBOL(transport_kmap_data_sg);
-void transport_kunmap_first_data_page(struct se_cmd *cmd)
+void transport_kunmap_data_sg(struct se_cmd *cmd)
{
- kunmap(sg_page(cmd->t_data_sg));
+ if (!cmd->t_data_nents)
+ return;
+ else if (cmd->t_data_nents == 1)
+ kunmap(sg_page(cmd->t_data_sg));
+
+ vunmap(cmd->t_data_vmap);
+ cmd->t_data_vmap = NULL;
}
-EXPORT_SYMBOL(transport_kunmap_first_data_page);
+EXPORT_SYMBOL(transport_kunmap_data_sg);
static int
transport_generic_get_mem(struct se_cmd *cmd)
u32 length = cmd->data_length;
unsigned int nents;
struct page *page;
+ gfp_t zero_flag;
int i = 0;
nents = DIV_ROUND_UP(length, PAGE_SIZE);
cmd->t_data_nents = nents;
sg_init_table(cmd->t_data_sg, nents);
+ zero_flag = cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB ? 0 : __GFP_ZERO;
+
while (length) {
u32 page_len = min_t(u32, length, PAGE_SIZE);
- page = alloc_page(GFP_KERNEL | __GFP_ZERO);
+ page = alloc_page(GFP_KERNEL | zero_flag);
if (!page)
goto out;
struct se_task *task;
unsigned long flags;
+ /* Workaround for handling zero-length control CDBs */
+ if ((cmd->se_cmd_flags & SCF_SCSI_CONTROL_SG_IO_CDB) &&
+ !cmd->data_length)
+ return 0;
+
task = transport_generic_get_task(cmd, cmd->data_direction);
if (!task)
return -ENOMEM;
else if (!task_cdbs && (cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB)) {
cmd->t_state = TRANSPORT_COMPLETE;
atomic_set(&cmd->t_transport_active, 1);
+
+ if (cmd->t_task_cdb[0] == REQUEST_SENSE) {
+ u8 ua_asc = 0, ua_ascq = 0;
+
+ core_scsi3_ua_clear_for_request_sense(cmd,
+ &ua_asc, &ua_ascq);
+ }
+
INIT_WORK(&cmd->work, target_complete_ok_work);
queue_work(target_completion_wq, &cmd->work);
return 0;
/* CURRENT ERROR */
buffer[offset] = 0x70;
buffer[offset+SPC_ADD_SENSE_LEN_OFFSET] = 10;
- /* ABORTED COMMAND */
- buffer[offset+SPC_SENSE_KEY_OFFSET] = ABORTED_COMMAND;
+ /* ILLEGAL REQUEST */
+ buffer[offset+SPC_SENSE_KEY_OFFSET] = ILLEGAL_REQUEST;
/* INVALID FIELD IN CDB */
buffer[offset+SPC_ASC_KEY_OFFSET] = 0x24;
break;
/* CURRENT ERROR */
buffer[offset] = 0x70;
buffer[offset+SPC_ADD_SENSE_LEN_OFFSET] = 10;
- /* ABORTED COMMAND */
- buffer[offset+SPC_SENSE_KEY_OFFSET] = ABORTED_COMMAND;
+ /* ILLEGAL REQUEST */
+ buffer[offset+SPC_SENSE_KEY_OFFSET] = ILLEGAL_REQUEST;
/* INVALID FIELD IN PARAMETER LIST */
buffer[offset+SPC_ASC_KEY_OFFSET] = 0x26;
break;
int data_dir = 0;
u32 data_len;
int task_attr;
- int ret;
fcp = fc_frame_payload_get(cmd->req_frame, sizeof(*fcp));
if (!fcp)
* Use a single se_cmd->cmd_kref as we expect to release se_cmd
* directly from ft_check_stop_free callback in response path.
*/
- ret = target_submit_cmd(&cmd->se_cmd, cmd->sess->se_sess, cmd->cdb,
+ target_submit_cmd(&cmd->se_cmd, cmd->sess->se_sess, cmd->cdb,
&cmd->ft_sense_buffer[0], cmd->lun, data_len,
task_attr, data_dir, 0);
- pr_debug("r_ctl %x alloc target_submit_cmd %d\n", fh->fh_r_ctl, ret);
- if (ret < 0) {
- ft_dump_cmd(cmd, __func__);
- return;
- }
+ pr_debug("r_ctl %x alloc target_submit_cmd\n", fh->fh_r_ctl);
return;
err:
if (!perm && op->op != KD_FONT_OP_GET)
return -EPERM;
op->data = compat_ptr(((struct compat_console_font_op *)op)->data);
- op->flags |= KD_FONT_FLAG_OLD;
i = con_font_op(vc, op);
if (i)
return i;
*/
lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
- sinfo->saved_lcdcon = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
+ sinfo->saved_lcdcon = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_CTR);
lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, 0);
if (sinfo->atmel_lcdfb_power_control)
sinfo->atmel_lcdfb_power_control(0);
struct fsl_diu_data *data;
data = dev_get_drvdata(&ofdev->dev);
- disable_lcdc(data->fsl_diu_info[0]);
+ disable_lcdc(data->fsl_diu_info);
return 0;
}
struct fsl_diu_data *data;
data = dev_get_drvdata(&ofdev->dev);
- enable_lcdc(data->fsl_diu_info[0]);
+ enable_lcdc(data->fsl_diu_info);
return 0;
}
if (fb_alloc_cmap(&info->cmap, 256, 1) < 0) {
ERR_MSG("Could not allocate cmap for intelfb_info.\n");
goto err_out_cmap;
- return -ENODEV;
}
dinfo = info->par;
DSSDBG("dispc_runtime_put\n");
- r = pm_runtime_put(&dispc.pdev->dev);
+ r = pm_runtime_put_sync(&dispc.pdev->dev);
WARN_ON(r < 0);
}
DSSDBG("dsi_runtime_put\n");
- r = pm_runtime_put(&dsi->pdev->dev);
+ r = pm_runtime_put_sync(&dsi->pdev->dev);
WARN_ON(r < 0);
}
DSSDBG("dss_runtime_put\n");
- r = pm_runtime_put(&dss.pdev->dev);
+ r = pm_runtime_put_sync(&dss.pdev->dev);
WARN_ON(r < 0);
}
DSSDBG("hdmi_runtime_put\n");
- r = pm_runtime_put(&hdmi.pdev->dev);
+ r = pm_runtime_put_sync(&hdmi.pdev->dev);
WARN_ON(r < 0);
}
int omapdss_hdmi_display_enable(struct omap_dss_device *dssdev)
{
+ struct omap_dss_hdmi_data *priv = dssdev->data;
int r = 0;
DSSDBG("ENTER hdmi_display_enable\n");
goto err0;
}
+ hdmi.ip_data.hpd_gpio = priv->hpd_gpio;
+
r = omap_dss_start_device(dssdev);
if (r) {
DSSERR("failed to start device\n");
DSSDBG("rfbi_runtime_put\n");
- r = pm_runtime_put(&rfbi.pdev->dev);
+ r = pm_runtime_put_sync(&rfbi.pdev->dev);
WARN_ON(r < 0);
}
const struct ti_hdmi_ip_ops *ops;
struct hdmi_config cfg;
struct hdmi_pll_info pll_data;
+
+ /* ti_hdmi_4xxx_ip private data. These should be in a separate struct */
+ int hpd_gpio;
+ bool phy_tx_enabled;
};
int ti_hdmi_4xxx_phy_enable(struct hdmi_ip_data *ip_data);
void ti_hdmi_4xxx_phy_disable(struct hdmi_ip_data *ip_data);
#include <linux/delay.h>
#include <linux/string.h>
#include <linux/seq_file.h>
+#include <linux/gpio.h>
#include "ti_hdmi_4xxx_ip.h"
#include "dss.h"
hdmi_set_pll_pwr(ip_data, HDMI_PLLPWRCMD_ALLOFF);
}
+static int hdmi_check_hpd_state(struct hdmi_ip_data *ip_data)
+{
+ unsigned long flags;
+ bool hpd;
+ int r;
+ /* this should be in ti_hdmi_4xxx_ip private data */
+ static DEFINE_SPINLOCK(phy_tx_lock);
+
+ spin_lock_irqsave(&phy_tx_lock, flags);
+
+ hpd = gpio_get_value(ip_data->hpd_gpio);
+
+ if (hpd == ip_data->phy_tx_enabled) {
+ spin_unlock_irqrestore(&phy_tx_lock, flags);
+ return 0;
+ }
+
+ if (hpd)
+ r = hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_TXON);
+ else
+ r = hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_LDOON);
+
+ if (r) {
+ DSSERR("Failed to %s PHY TX power\n",
+ hpd ? "enable" : "disable");
+ goto err;
+ }
+
+ ip_data->phy_tx_enabled = hpd;
+err:
+ spin_unlock_irqrestore(&phy_tx_lock, flags);
+ return r;
+}
+
+static irqreturn_t hpd_irq_handler(int irq, void *data)
+{
+ struct hdmi_ip_data *ip_data = data;
+
+ hdmi_check_hpd_state(ip_data);
+
+ return IRQ_HANDLED;
+}
+
int ti_hdmi_4xxx_phy_enable(struct hdmi_ip_data *ip_data)
{
u16 r = 0;
if (r)
return r;
- r = hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_TXON);
- if (r)
- return r;
-
/*
* Read address 0 in order to get the SCP reset done completed
* Dummy access performed to make sure reset is done
/* Write to phy address 3 to change the polarity control */
REG_FLD_MOD(phy_base, HDMI_TXPHY_PAD_CFG_CTRL, 0x1, 27, 27);
+ r = request_threaded_irq(gpio_to_irq(ip_data->hpd_gpio),
+ NULL, hpd_irq_handler,
+ IRQF_DISABLED | IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING, "hpd", ip_data);
+ if (r) {
+ DSSERR("HPD IRQ request failed\n");
+ hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_OFF);
+ return r;
+ }
+
+ r = hdmi_check_hpd_state(ip_data);
+ if (r) {
+ free_irq(gpio_to_irq(ip_data->hpd_gpio), ip_data);
+ hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_OFF);
+ return r;
+ }
+
return 0;
}
void ti_hdmi_4xxx_phy_disable(struct hdmi_ip_data *ip_data)
{
+ free_irq(gpio_to_irq(ip_data->hpd_gpio), ip_data);
+
hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_OFF);
+ ip_data->phy_tx_enabled = false;
}
static int hdmi_core_ddc_init(struct hdmi_ip_data *ip_data)
DSSDBG("venc_runtime_put\n");
- r = pm_runtime_put(&venc.pdev->dev);
+ r = pm_runtime_put_sync(&venc.pdev->dev);
WARN_ON(r < 0);
}
unsigned long ttl;
u32 gen;
- spin_lock(&cap->session->s_cap_lock);
+ spin_lock(&cap->session->s_gen_ttl_lock);
gen = cap->session->s_cap_gen;
ttl = cap->session->s_cap_ttl;
- spin_unlock(&cap->session->s_cap_lock);
+ spin_unlock(&cap->session->s_gen_ttl_lock);
if (cap->cap_gen < gen || time_after_eq(jiffies, ttl)) {
dout("__cap_is_valid %p cap %p issued %s "
di = ceph_dentry(dentry);
if (di->lease_session) {
s = di->lease_session;
- spin_lock(&s->s_cap_lock);
+ spin_lock(&s->s_gen_ttl_lock);
gen = s->s_cap_gen;
ttl = s->s_cap_ttl;
- spin_unlock(&s->s_cap_lock);
+ spin_unlock(&s->s_gen_ttl_lock);
if (di->lease_gen == gen &&
time_before(jiffies, dentry->d_time) &&
/* trace */
ceph_decode_32_safe(&p, end, len, bad);
if (len > 0) {
+ ceph_decode_need(&p, end, len, bad);
err = parse_reply_info_trace(&p, p+len, info, features);
if (err < 0)
goto out_bad;
/* extra */
ceph_decode_32_safe(&p, end, len, bad);
if (len > 0) {
+ ceph_decode_need(&p, end, len, bad);
err = parse_reply_info_extra(&p, p+len, info, features);
if (err < 0)
goto out_bad;
s->s_con.peer_name.type = CEPH_ENTITY_TYPE_MDS;
s->s_con.peer_name.num = cpu_to_le64(mds);
- spin_lock_init(&s->s_cap_lock);
+ spin_lock_init(&s->s_gen_ttl_lock);
s->s_cap_gen = 0;
s->s_cap_ttl = 0;
+
+ spin_lock_init(&s->s_cap_lock);
s->s_renew_requested = 0;
s->s_renew_seq = 0;
INIT_LIST_HEAD(&s->s_caps);
case CEPH_SESSION_STALE:
pr_info("mds%d caps went stale, renewing\n",
session->s_mds);
- spin_lock(&session->s_cap_lock);
+ spin_lock(&session->s_gen_ttl_lock);
session->s_cap_gen++;
session->s_cap_ttl = 0;
- spin_unlock(&session->s_cap_lock);
+ spin_unlock(&session->s_gen_ttl_lock);
send_renew_caps(mdsc, session);
break;
void *s_authorizer_buf, *s_authorizer_reply_buf;
size_t s_authorizer_buf_len, s_authorizer_reply_buf_len;
- /* protected by s_cap_lock */
- spinlock_t s_cap_lock;
+ /* protected by s_gen_ttl_lock */
+ spinlock_t s_gen_ttl_lock;
u32 s_cap_gen; /* inc each time we get mds stale msg */
unsigned long s_cap_ttl; /* when session caps expire */
+
+ /* protected by s_cap_lock */
+ spinlock_t s_cap_lock;
struct list_head s_caps; /* all caps issued by this session */
int s_nr_caps, s_trim_caps;
int s_num_cap_releases;
}
static struct ceph_vxattr_cb ceph_file_vxattrs[] = {
+ { true, "ceph.file.layout", ceph_vxattrcb_layout},
+ /* The following extended attribute name is deprecated */
{ true, "ceph.layout", ceph_vxattrcb_layout},
- { NULL, NULL }
+ { true, NULL, NULL }
};
static struct ceph_vxattr_cb *ceph_inode_vxattrs(struct inode *inode)
points. If unsure, say N.
config CIFS_FSCACHE
- bool "Provide CIFS client caching support (EXPERIMENTAL)"
+ bool "Provide CIFS client caching support"
depends on CIFS=m && FSCACHE || CIFS=y && FSCACHE=y
help
Makes CIFS FS-Cache capable. Say Y here if you want your CIFS data
manager. If unsure, say N.
config CIFS_ACL
- bool "Provide CIFS ACL support (EXPERIMENTAL)"
+ bool "Provide CIFS ACL support"
depends on CIFS_XATTR && KEYS
help
Allows to fetch CIFS/NTFS ACL from the server. The DACL blob
len = delim - payload;
if (len > MAX_USERNAME_SIZE || len <= 0) {
- cFYI(1, "Bad value from username search (len=%ld)", len);
+ cFYI(1, "Bad value from username search (len=%zd)", len);
rc = -EINVAL;
goto out_key_put;
}
vol->username = kstrndup(payload, len, GFP_KERNEL);
if (!vol->username) {
- cFYI(1, "Unable to allocate %ld bytes for username", len);
+ cFYI(1, "Unable to allocate %zd bytes for username", len);
rc = -ENOMEM;
goto out_key_put;
}
len = key->datalen - (len + 1);
if (len > MAX_PASSWORD_SIZE || len <= 0) {
- cFYI(1, "Bad len for password search (len=%ld)", len);
+ cFYI(1, "Bad len for password search (len=%zd)", len);
rc = -EINVAL;
kfree(vol->username);
vol->username = NULL;
++delim;
vol->password = kstrndup(delim, len, GFP_KERNEL);
if (!vol->password) {
- cFYI(1, "Unable to allocate %ld bytes for password", len);
+ cFYI(1, "Unable to allocate %zd bytes for password", len);
rc = -ENOMEM;
kfree(vol->username);
vol->username = NULL;
struct smb_vol *vol_info;
vol_info = kzalloc(sizeof(*vol_info), GFP_KERNEL);
- if (vol_info == NULL) {
- tcon = ERR_PTR(-ENOMEM);
- goto out;
- }
+ if (vol_info == NULL)
+ return ERR_PTR(-ENOMEM);
vol_info->local_nls = cifs_sb->local_nls;
vol_info->linux_uid = fsuid;
/* copy user */
/* BB what about null user mounts - check that we do this BB */
/* copy user */
- if (ses->user_name != NULL)
+ if (ses->user_name != NULL) {
strncpy(bcc_ptr, ses->user_name, MAX_USERNAME_SIZE);
+ bcc_ptr += strnlen(ses->user_name, MAX_USERNAME_SIZE);
+ }
/* else null user mount */
-
- bcc_ptr += strnlen(ses->user_name, MAX_USERNAME_SIZE);
*bcc_ptr = 0;
bcc_ptr++; /* account for null termination */
/* copy domain */
-
if (ses->domainName != NULL) {
strncpy(bcc_ptr, ses->domainName, 256);
bcc_ptr += strnlen(ses->domainName, 256);
ses->ntlmssp->server_flags = le32_to_cpu(pblob->NegotiateFlags);
tioffset = le32_to_cpu(pblob->TargetInfoArray.BufferOffset);
tilen = le16_to_cpu(pblob->TargetInfoArray.Length);
+ if (tioffset > blob_len || tioffset + tilen > blob_len) {
+ cERROR(1, "tioffset + tilen too high %u + %u", tioffset, tilen);
+ return -EINVAL;
+ }
if (tilen) {
ses->auth_key.response = kmalloc(tilen, GFP_KERNEL);
if (!ses->auth_key.response) {
perf_event_comm(tsk);
}
+static void filename_to_taskname(char *tcomm, const char *fn, unsigned int len)
+{
+ int i, ch;
+
+ /* Copies the binary name from after last slash */
+ for (i = 0; (ch = *(fn++)) != '\0';) {
+ if (ch == '/')
+ i = 0; /* overwrite what we wrote */
+ else
+ if (i < len - 1)
+ tcomm[i++] = ch;
+ }
+ tcomm[i] = '\0';
+}
+
int flush_old_exec(struct linux_binprm * bprm)
{
int retval;
set_mm_exe_file(bprm->mm, bprm->file);
+ filename_to_taskname(bprm->tcomm, bprm->filename, sizeof(bprm->tcomm));
/*
* Release all of the old mmap stuff
*/
void setup_new_exec(struct linux_binprm * bprm)
{
- int i, ch;
- const char *name;
- char tcomm[sizeof(current->comm)];
-
arch_pick_mmap_layout(current->mm);
/* This is the point of no return */
else
set_dumpable(current->mm, suid_dumpable);
- name = bprm->filename;
-
- /* Copies the binary name from after last slash */
- for (i=0; (ch = *(name++)) != '\0';) {
- if (ch == '/')
- i = 0; /* overwrite what we wrote */
- else
- if (i < (sizeof(tcomm) - 1))
- tcomm[i++] = ch;
- }
- tcomm[i] = '\0';
- set_task_comm(current, tcomm);
+ set_task_comm(current, bprm->tcomm);
/* Set the new mm task size. We have to do that late because it may
* depend on TIF_32BIT which is only updated in flush_thread() on
void *ebuf;
uint32_t ofs;
size_t retlen;
- int ret = -EIO;
+ int ret;
unsigned long *wordebuf;
ret = mtd_point(c->mtd, jeb->offset, c->sector_size, &retlen,
filler_t *filler = logfs_mtd_readpage;
struct mtd_info *mtd = super->s_mtd;
- if (!mtd_can_have_bb(mtd))
- return NULL;
-
*ofs = 0;
while (mtd_block_isbad(mtd, *ofs)) {
*ofs += mtd->erasesize;
filler_t *filler = logfs_mtd_readpage;
struct mtd_info *mtd = super->s_mtd;
- if (!mtd_can_have_bb(mtd))
- return NULL;
-
*ofs = mtd->size - mtd->erasesize;
while (mtd_block_isbad(mtd, *ofs)) {
*ofs -= mtd->erasesize;
nsegs = argv[4].v_nmembs;
if (argv[4].v_size != argsz[4])
goto out;
+ if (nsegs > UINT_MAX / sizeof(__u64))
+ goto out;
/*
* argv[4] points to segment numbers this ioctl cleans. We
return result;
}
-static struct mm_struct *mm_access(struct task_struct *task, unsigned int mode)
-{
- struct mm_struct *mm;
- int err;
-
- err = mutex_lock_killable(&task->signal->cred_guard_mutex);
- if (err)
- return ERR_PTR(err);
-
- mm = get_task_mm(task);
- if (mm && mm != current->mm &&
- !ptrace_may_access(task, mode)) {
- mmput(mm);
- mm = ERR_PTR(-EACCES);
- }
- mutex_unlock(&task->signal->cred_guard_mutex);
-
- return mm;
-}
-
struct mm_struct *mm_for_maps(struct task_struct *task)
{
return mm_access(task, PTRACE_MODE_READ);
if (IS_ERR(mm))
return PTR_ERR(mm);
+ if (mm) {
+ /* ensure this mm_struct can't be freed */
+ atomic_inc(&mm->mm_count);
+ /* but do not pin its memory */
+ mmput(mm);
+ }
+
/* OK to pass negative loff_t, we can catch out-of-range */
file->f_mode |= FMODE_UNSIGNED_OFFSET;
file->private_data = mm;
return 0;
}
-static ssize_t mem_read(struct file * file, char __user * buf,
- size_t count, loff_t *ppos)
+static ssize_t mem_rw(struct file *file, char __user *buf,
+ size_t count, loff_t *ppos, int write)
{
- int ret;
- char *page;
- unsigned long src = *ppos;
struct mm_struct *mm = file->private_data;
-
- if (!mm)
- return 0;
-
- page = (char *)__get_free_page(GFP_TEMPORARY);
- if (!page)
- return -ENOMEM;
-
- ret = 0;
-
- while (count > 0) {
- int this_len, retval;
-
- this_len = (count > PAGE_SIZE) ? PAGE_SIZE : count;
- retval = access_remote_vm(mm, src, page, this_len, 0);
- if (!retval) {
- if (!ret)
- ret = -EIO;
- break;
- }
-
- if (copy_to_user(buf, page, retval)) {
- ret = -EFAULT;
- break;
- }
-
- ret += retval;
- src += retval;
- buf += retval;
- count -= retval;
- }
- *ppos = src;
-
- free_page((unsigned long) page);
- return ret;
-}
-
-static ssize_t mem_write(struct file * file, const char __user *buf,
- size_t count, loff_t *ppos)
-{
- int copied;
+ unsigned long addr = *ppos;
+ ssize_t copied;
char *page;
- unsigned long dst = *ppos;
- struct mm_struct *mm = file->private_data;
if (!mm)
return 0;
return -ENOMEM;
copied = 0;
+ if (!atomic_inc_not_zero(&mm->mm_users))
+ goto free;
+
while (count > 0) {
- int this_len, retval;
+ int this_len = min_t(int, count, PAGE_SIZE);
- this_len = (count > PAGE_SIZE) ? PAGE_SIZE : count;
- if (copy_from_user(page, buf, this_len)) {
+ if (write && copy_from_user(page, buf, this_len)) {
copied = -EFAULT;
break;
}
- retval = access_remote_vm(mm, dst, page, this_len, 1);
- if (!retval) {
+
+ this_len = access_remote_vm(mm, addr, page, this_len, write);
+ if (!this_len) {
if (!copied)
copied = -EIO;
break;
}
- copied += retval;
- buf += retval;
- dst += retval;
- count -= retval;
+
+ if (!write && copy_to_user(buf, page, this_len)) {
+ copied = -EFAULT;
+ break;
+ }
+
+ buf += this_len;
+ addr += this_len;
+ copied += this_len;
+ count -= this_len;
}
- *ppos = dst;
+ *ppos = addr;
+ mmput(mm);
+free:
free_page((unsigned long) page);
return copied;
}
+static ssize_t mem_read(struct file *file, char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ return mem_rw(file, buf, count, ppos, 0);
+}
+
+static ssize_t mem_write(struct file *file, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ return mem_rw(file, (char __user*)buf, count, ppos, 1);
+}
+
loff_t mem_lseek(struct file *file, loff_t offset, int orig)
{
switch (orig) {
static int mem_release(struct inode *inode, struct file *file)
{
struct mm_struct *mm = file->private_data;
-
- mmput(mm);
+ if (mm)
+ mmdrop(mm);
return 0;
}
#ifdef CONFIG_PCI
/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */
extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+/* Create a virtual mapping cookie for a port on a given PCI device.
+ * Do not call this directly, it exists to make it easier for architectures
+ * to override */
+#ifdef CONFIG_NO_GENERIC_PCI_IOPORT_MAP
+extern void __iomem *__pci_ioport_map(struct pci_dev *dev, unsigned long port,
+ unsigned int nr);
+#else
+#define __pci_ioport_map(dev, port, nr) ioport_map((port), (nr))
+#endif
+
#else
static inline void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max)
{
#define BINPRM_BUF_SIZE 128
#ifdef __KERNEL__
-#include <linux/list.h>
+#include <linux/sched.h>
#define CORENAME_MAX_SIZE 128
unsigned interp_flags;
unsigned interp_data;
unsigned long loader, exec;
+ char tcomm[TASK_COMM_LEN];
};
#define BINPRM_FLAGS_ENFORCE_NONDUMP_BIT 0
#ifndef _GPIO_KEYS_H
#define _GPIO_KEYS_H
+struct device;
+
struct gpio_keys_button {
/* Configuration parameters */
unsigned int code; /* input event code (KEY_*, SW_*) */
int rev;
u8 vibra_ctrl_cache[2];
+ /* PLL configuration */
int pll;
unsigned int sysclk;
+ unsigned int mclk;
unsigned int irq;
unsigned int irq_base;
typedef struct gcry_mpi *MPI;
-#define MPI_NULL NULL
-
#define mpi_get_nlimbs(a) ((a)->nlimbs)
#define mpi_is_neg(a) ((a)->sign)
static inline int mtd_suspend(struct mtd_info *mtd)
{
- if (!mtd->suspend)
- return -EOPNOTSUPP;
- return mtd->suspend(mtd);
+ return mtd->suspend ? mtd->suspend(mtd) : 0;
}
static inline void mtd_resume(struct mtd_info *mtd)
static inline int mtd_can_have_bb(const struct mtd_info *mtd)
{
- return 0;
+ return !!mtd->block_isbad;
}
/* Kernel-side ioctl definitions */
u64 sample_period;
u64 last_period;
local64_t period_left;
+ u64 interrupts_seq;
u64 interrupts;
u64 freq_time_stamp;
{ return; }
static inline int pm_qos_request(int pm_qos_class)
- { return 0; }
+{
+ switch (pm_qos_class) {
+ case PM_QOS_CPU_DMA_LATENCY:
+ return PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE;
+ case PM_QOS_NETWORK_LATENCY:
+ return PM_QOS_NETWORK_LAT_DEFAULT_VALUE;
+ case PM_QOS_NETWORK_THROUGHPUT:
+ return PM_QOS_NETWORK_THROUGHPUT_DEFAULT_VALUE;
+ default:
+ return PM_QOS_DEFAULT_VALUE;
+ }
+}
+
static inline int pm_qos_add_notifier(int pm_qos_class,
struct notifier_block *notifier)
{ return 0; }
extern void mmput(struct mm_struct *);
/* Grab a reference to a task's mm, if it is not already going away */
extern struct mm_struct *get_task_mm(struct task_struct *task);
+/*
+ * Grab a reference to a task's mm, if it is not already going away
+ * and ptrace_may_access with the mode parameter passed to it
+ * succeeds.
+ */
+extern struct mm_struct *mm_access(struct task_struct *task, unsigned int mode);
/* Remove the current tasks stale references to the old mm_struct */
extern void mm_release(struct task_struct *, struct mm_struct *);
/* Allocate a new mm structure and copy contents from tsk->mm */
unsigned int needs_tend_set:1;
unsigned int no_dmars:1;
unsigned int chclr_present:1;
+ unsigned int slave_only:1;
};
/* DMA register */
#define gameport_get_port_data(gp) (gp)->port_data
#endif
+#ifdef CONFIG_PCI
/* PCI quirk list helper */
struct snd_pci_quirk {
unsigned short subvendor; /* PCI subvendor ID */
const struct snd_pci_quirk *
snd_pci_quirk_lookup_id(u16 vendor, u16 device,
const struct snd_pci_quirk *list);
+#endif
#endif /* __SOUND_CORE_H */
int transport_set_vpd_ident(struct t10_vpd *, unsigned char *);
/* core helpers also used by command snooping in pscsi */
-void *transport_kmap_first_data_page(struct se_cmd *);
-void transport_kunmap_first_data_page(struct se_cmd *);
+void *transport_kmap_data_sg(struct se_cmd *);
+void transport_kunmap_data_sg(struct se_cmd *);
#endif /* TARGET_CORE_BACKEND_H */
struct scatterlist *t_data_sg;
unsigned int t_data_nents;
+ void *t_data_vmap;
struct scatterlist *t_bidi_data_sg;
unsigned int t_bidi_data_nents;
struct se_session *, u32, int, int, unsigned char *);
int transport_lookup_cmd_lun(struct se_cmd *, u32);
int transport_generic_allocate_tasks(struct se_cmd *, unsigned char *);
-int target_submit_cmd(struct se_cmd *, struct se_session *, unsigned char *,
+void target_submit_cmd(struct se_cmd *, struct se_session *, unsigned char *,
unsigned char *, u32, u32, int, int, int);
int transport_handle_cdb_direct(struct se_cmd *);
int transport_generic_handle_cdb_map(struct se_cmd *);
int (*get_backlight)(struct omap_dss_device *dssdev);
};
+struct omap_dss_hdmi_data
+{
+ int hpd_gpio;
+};
+
struct omap_dss_driver {
struct device_driver driver;
return div64_u64(dividend, divisor);
}
+static DEFINE_PER_CPU(int, perf_throttled_count);
+static DEFINE_PER_CPU(u64, perf_throttled_seq);
+
static void perf_adjust_period(struct perf_event *event, u64 nsec, u64 count)
{
struct hw_perf_event *hwc = &event->hw;
}
}
-static void perf_ctx_adjust_freq(struct perf_event_context *ctx, u64 period)
+/*
+ * combine freq adjustment with unthrottling to avoid two passes over the
+ * events. At the same time, make sure, having freq events does not change
+ * the rate of unthrottling as that would introduce bias.
+ */
+static void perf_adjust_freq_unthr_context(struct perf_event_context *ctx,
+ int needs_unthr)
{
struct perf_event *event;
struct hw_perf_event *hwc;
- u64 interrupts, now;
+ u64 now, period = TICK_NSEC;
s64 delta;
- if (!ctx->nr_freq)
+ /*
+ * only need to iterate over all events iff:
+ * - context have events in frequency mode (needs freq adjust)
+ * - there are events to unthrottle on this cpu
+ */
+ if (!(ctx->nr_freq || needs_unthr))
return;
+ raw_spin_lock(&ctx->lock);
+
list_for_each_entry_rcu(event, &ctx->event_list, event_entry) {
if (event->state != PERF_EVENT_STATE_ACTIVE)
continue;
hwc = &event->hw;
- interrupts = hwc->interrupts;
- hwc->interrupts = 0;
-
- /*
- * unthrottle events on the tick
- */
- if (interrupts == MAX_INTERRUPTS) {
+ if (needs_unthr && hwc->interrupts == MAX_INTERRUPTS) {
+ hwc->interrupts = 0;
perf_log_throttle(event, 1);
event->pmu->start(event, 0);
}
if (!event->attr.freq || !event->attr.sample_freq)
continue;
- event->pmu->read(event);
+ /*
+ * stop the event and update event->count
+ */
+ event->pmu->stop(event, PERF_EF_UPDATE);
+
now = local64_read(&event->count);
delta = now - hwc->freq_count_stamp;
hwc->freq_count_stamp = now;
+ /*
+ * restart the event
+ * reload only if value has changed
+ */
if (delta > 0)
perf_adjust_period(event, period, delta);
+
+ event->pmu->start(event, delta > 0 ? PERF_EF_RELOAD : 0);
}
+
+ raw_spin_unlock(&ctx->lock);
}
/*
*/
static void perf_rotate_context(struct perf_cpu_context *cpuctx)
{
- u64 interval = (u64)cpuctx->jiffies_interval * TICK_NSEC;
struct perf_event_context *ctx = NULL;
- int rotate = 0, remove = 1, freq = 0;
+ int rotate = 0, remove = 1;
if (cpuctx->ctx.nr_events) {
remove = 0;
if (cpuctx->ctx.nr_events != cpuctx->ctx.nr_active)
rotate = 1;
- if (cpuctx->ctx.nr_freq)
- freq = 1;
}
ctx = cpuctx->task_ctx;
remove = 0;
if (ctx->nr_events != ctx->nr_active)
rotate = 1;
- if (ctx->nr_freq)
- freq = 1;
}
- if (!rotate && !freq)
+ if (!rotate)
goto done;
perf_ctx_lock(cpuctx, cpuctx->task_ctx);
perf_pmu_disable(cpuctx->ctx.pmu);
- if (freq) {
- perf_ctx_adjust_freq(&cpuctx->ctx, interval);
- if (ctx)
- perf_ctx_adjust_freq(ctx, interval);
- }
-
- if (rotate) {
- cpu_ctx_sched_out(cpuctx, EVENT_FLEXIBLE);
- if (ctx)
- ctx_sched_out(ctx, cpuctx, EVENT_FLEXIBLE);
+ cpu_ctx_sched_out(cpuctx, EVENT_FLEXIBLE);
+ if (ctx)
+ ctx_sched_out(ctx, cpuctx, EVENT_FLEXIBLE);
- rotate_ctx(&cpuctx->ctx);
- if (ctx)
- rotate_ctx(ctx);
+ rotate_ctx(&cpuctx->ctx);
+ if (ctx)
+ rotate_ctx(ctx);
- perf_event_sched_in(cpuctx, ctx, current);
- }
+ perf_event_sched_in(cpuctx, ctx, current);
perf_pmu_enable(cpuctx->ctx.pmu);
perf_ctx_unlock(cpuctx, cpuctx->task_ctx);
-
done:
if (remove)
list_del_init(&cpuctx->rotation_list);
{
struct list_head *head = &__get_cpu_var(rotation_list);
struct perf_cpu_context *cpuctx, *tmp;
+ struct perf_event_context *ctx;
+ int throttled;
WARN_ON(!irqs_disabled());
+ __this_cpu_inc(perf_throttled_seq);
+ throttled = __this_cpu_xchg(perf_throttled_count, 0);
+
list_for_each_entry_safe(cpuctx, tmp, head, rotation_list) {
+ ctx = &cpuctx->ctx;
+ perf_adjust_freq_unthr_context(ctx, throttled);
+
+ ctx = cpuctx->task_ctx;
+ if (ctx)
+ perf_adjust_freq_unthr_context(ctx, throttled);
+
if (cpuctx->jiffies_interval == 1 ||
!(jiffies % cpuctx->jiffies_interval))
perf_rotate_context(cpuctx);
{
int events = atomic_read(&event->event_limit);
struct hw_perf_event *hwc = &event->hw;
+ u64 seq;
int ret = 0;
/*
if (unlikely(!is_sampling_event(event)))
return 0;
- if (unlikely(hwc->interrupts >= max_samples_per_tick)) {
- if (throttle) {
+ seq = __this_cpu_read(perf_throttled_seq);
+ if (seq != hwc->interrupts_seq) {
+ hwc->interrupts_seq = seq;
+ hwc->interrupts = 1;
+ } else {
+ hwc->interrupts++;
+ if (unlikely(throttle
+ && hwc->interrupts >= max_samples_per_tick)) {
+ __this_cpu_inc(perf_throttled_count);
hwc->interrupts = MAX_INTERRUPTS;
perf_log_throttle(event, 0);
ret = 1;
}
- } else
- hwc->interrupts++;
+ }
if (event->attr.freq) {
u64 now = perf_clock();
if (tsk->nr_dirtied)
__this_cpu_add(dirty_throttle_leaks, tsk->nr_dirtied);
exit_rcu();
+
+ /*
+ * The setting of TASK_RUNNING by try_to_wake_up() may be delayed
+ * when the following two conditions become true.
+ * - There is race condition of mmap_sem (It is acquired by
+ * exit_mm()), and
+ * - SMI occurs before setting TASK_RUNINNG.
+ * (or hypervisor of virtual machine switches to other guest)
+ * As a result, we may become TASK_RUNNING after becoming TASK_DEAD
+ *
+ * To avoid it, we have to wait for releasing tsk->pi_lock which
+ * is held by try_to_wake_up()
+ */
+ smp_mb();
+ raw_spin_unlock_wait(&tsk->pi_lock);
+
/* causes final put_task_struct in finish_task_switch(). */
tsk->state = TASK_DEAD;
tsk->flags |= PF_NOFREEZE; /* tell freezer to ignore us */
}
EXPORT_SYMBOL_GPL(get_task_mm);
+struct mm_struct *mm_access(struct task_struct *task, unsigned int mode)
+{
+ struct mm_struct *mm;
+ int err;
+
+ err = mutex_lock_killable(&task->signal->cred_guard_mutex);
+ if (err)
+ return ERR_PTR(err);
+
+ mm = get_task_mm(task);
+ if (mm && mm != current->mm &&
+ !ptrace_may_access(task, mode)) {
+ mmput(mm);
+ mm = ERR_PTR(-EACCES);
+ }
+ mutex_unlock(&task->signal->cred_guard_mutex);
+
+ return mm;
+}
+
/* Please note the differences between mmput and mm_release.
* mmput is called whenever we stop holding onto a mm_struct,
* error success whatever.
ri->rp = rp;
ri->task = current;
- if (rp->entry_handler && rp->entry_handler(ri, regs))
+ if (rp->entry_handler && rp->entry_handler(ri, regs)) {
+ raw_spin_lock_irqsave(&rp->lock, flags);
+ hlist_add_head(&ri->hlist, &rp->free_instances);
+ raw_spin_unlock_irqrestore(&rp->lock, flags);
return 0;
+ }
arch_prepare_kretprobe(ri, regs);
#ifdef CONFIG_SUSPEND_FREEZER
static inline int suspend_freeze_processes(void)
{
- int error = freeze_processes();
- return error ? : freeze_kernel_threads();
+ int error;
+
+ error = freeze_processes();
+
+ /*
+ * freeze_processes() automatically thaws every task if freezing
+ * fails. So we need not do anything extra upon error.
+ */
+ if (error)
+ goto Finish;
+
+ error = freeze_kernel_threads();
+
+ /*
+ * freeze_kernel_threads() thaws only kernel threads upon freezing
+ * failure. So we have to thaw the userspace tasks ourselves.
+ */
+ if (error)
+ thaw_processes();
+
+ Finish:
+ return error;
}
static inline void suspend_thaw_processes(void)
/**
* freeze_kernel_threads - Make freezable kernel threads go to the refrigerator.
*
- * On success, returns 0. On failure, -errno and system is fully thawed.
+ * On success, returns 0. On failure, -errno and only the kernel threads are
+ * thawed, so as to give a chance to the caller to do additional cleanups
+ * (if any) before thawing the userspace tasks. So, it is the responsibility
+ * of the caller to thaw the userspace tasks, when the time is right.
*/
int freeze_kernel_threads(void)
{
BUG_ON(in_atomic());
if (error)
- thaw_processes();
+ thaw_kernel_threads();
return error;
}
}
pm_restore_gfp_mask();
error = hibernation_snapshot(data->platform_support);
- if (!error) {
+ if (error) {
+ thaw_kernel_threads();
+ } else {
error = put_user(in_suspend, (int __user *)arg);
if (!error && !freezer_test_done)
data->ready = 1;
if (freezer_test_done) {
freezer_test_done = false;
- thaw_processes();
+ thaw_kernel_threads();
}
}
break;
#include <asm/tlb.h>
#include <asm/irq_regs.h>
+#include <asm/mutex.h>
#ifdef CONFIG_PARAVIRT
#include <asm/paravirt.h>
#endif
p->sched_class->dequeue_task(rq, p, flags);
}
-/*
- * activate_task - move a task to the runqueue.
- */
void activate_task(struct rq *rq, struct task_struct *p, int flags)
{
if (task_contributes_to_load(p))
enqueue_task(rq, p, flags);
}
-/*
- * deactivate_task - remove a task from the runqueue.
- */
void deactivate_task(struct rq *rq, struct task_struct *p, int flags)
{
if (task_contributes_to_load(p))
on_rq = p->on_rq;
running = task_current(rq, p);
if (on_rq)
- deactivate_task(rq, p, 0);
+ dequeue_task(rq, p, 0);
if (running)
p->sched_class->put_prev_task(rq, p);
if (running)
p->sched_class->set_curr_task(rq);
if (on_rq)
- activate_task(rq, p, 0);
+ enqueue_task(rq, p, 0);
check_class_changed(rq, p, prev_class, oldprio);
task_rq_unlock(rq, p, &flags);
* placed properly.
*/
if (p->on_rq) {
- deactivate_task(rq_src, p, 0);
+ dequeue_task(rq_src, p, 0);
set_task_cpu(p, dest_cpu);
- activate_task(rq_dest, p, 0);
+ enqueue_task(rq_dest, p, 0);
check_preempt_curr(rq_dest, p, 0);
}
done:
on_rq = p->on_rq;
if (on_rq)
- deactivate_task(rq, p, 0);
+ dequeue_task(rq, p, 0);
__setscheduler(rq, p, SCHED_NORMAL, 0);
if (on_rq) {
- activate_task(rq, p, 0);
+ enqueue_task(rq, p, 0);
resched_task(rq->curr);
}
return;
}
+static inline void clear_nohz_tick_stopped(int cpu)
+{
+ if (unlikely(test_bit(NOHZ_TICK_STOPPED, nohz_flags(cpu)))) {
+ cpumask_clear_cpu(cpu, nohz.idle_cpus_mask);
+ atomic_dec(&nohz.nr_cpus);
+ clear_bit(NOHZ_TICK_STOPPED, nohz_flags(cpu));
+ }
+}
+
static inline void set_cpu_sd_state_busy(void)
{
struct sched_domain *sd;
{
int cpu = smp_processor_id();
+ /*
+ * If this cpu is going down, then nothing needs to be done.
+ */
+ if (!cpu_active(cpu))
+ return;
+
if (stop_tick) {
if (test_bit(NOHZ_TICK_STOPPED, nohz_flags(cpu)))
return;
}
return;
}
+
+static int __cpuinit sched_ilb_notifier(struct notifier_block *nfb,
+ unsigned long action, void *hcpu)
+{
+ switch (action & ~CPU_TASKS_FROZEN) {
+ case CPU_DYING:
+ clear_nohz_tick_stopped(smp_processor_id());
+ return NOTIFY_OK;
+ default:
+ return NOTIFY_DONE;
+ }
+}
#endif
static DEFINE_SPINLOCK(balancing);
* busy tick after returning from idle, we will update the busy stats.
*/
set_cpu_sd_state_busy();
- if (unlikely(test_bit(NOHZ_TICK_STOPPED, nohz_flags(cpu)))) {
- clear_bit(NOHZ_TICK_STOPPED, nohz_flags(cpu));
- cpumask_clear_cpu(cpu, nohz.idle_cpus_mask);
- atomic_dec(&nohz.nr_cpus);
- }
+ clear_nohz_tick_stopped(cpu);
/*
* None are in tickless mode and hence no need for NOHZ idle load
#ifdef CONFIG_NO_HZ
zalloc_cpumask_var(&nohz.idle_cpus_mask, GFP_NOWAIT);
+ cpu_notifier(sched_ilb_notifier, 0);
#endif
#endif /* SMP */
if (!next_task)
return 0;
+#ifdef __ARCH_WANT_INTERRUPTS_ON_CTXSW
+ if (unlikely(task_running(rq, next_task)))
+ return 0;
+#endif
+
retry:
if (unlikely(next_task == rq->curr)) {
WARN_ON(1);
if (__this_cpu_read(soft_watchdog_warn) == true)
return HRTIMER_RESTART;
- printk(KERN_ERR "BUG: soft lockup - CPU#%d stuck for %us! [%s:%d]\n",
+ printk(KERN_EMERG "BUG: soft lockup - CPU#%d stuck for %us! [%s:%d]\n",
smp_processor_id(), duration,
current->comm, task_pid_nr(current));
print_modules();
config GENERIC_FIND_FIRST_BIT
bool
+config NO_GENERIC_PCI_IOPORT_MAP
+ bool
+
config GENERIC_PCI_IOMAP
bool
If unsure, say N.
+config CLZ_TAB
+ bool
+
config CORDIC
tristate "CORDIC algorithm"
help
config MPILIB
tristate
+ select CLZ_TAB
help
Multiprecision maths library from GnuPG.
It is used to implement RSA digital signature verification,
obj-$(CONFIG_MPILIB) += mpi/
obj-$(CONFIG_SIGNATURE) += digsig.o
+obj-$(CONFIG_CLZ_TAB) += clz_tab.o
+
hostprogs-y := gen_crc32table
clean-files := crc32table.h
return BUG_TRAP_TYPE_WARN;
}
- printk(KERN_EMERG "------------[ cut here ]------------\n");
+ printk(KERN_DEFAULT "------------[ cut here ]------------\n");
if (file)
printk(KERN_CRIT "kernel BUG at %s:%u!\n",
--- /dev/null
+const unsigned char __clz_tab[] = {
+ 0, 1, 2, 2, 3, 3, 3, 3, 4, 4, 4, 4, 4, 4, 4, 4, 5, 5, 5, 5, 5, 5, 5, 5,
+ 5, 5, 5, 5, 5, 5, 5, 5,
+ 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6,
+ 6, 6, 6, 6, 6, 6, 6, 6,
+ 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+ 7, 7, 7, 7, 7, 7, 7, 7,
+ 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+ 7, 7, 7, 7, 7, 7, 7, 7,
+ 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
+ 8, 8, 8, 8, 8, 8, 8, 8,
+ 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
+ 8, 8, 8, 8, 8, 8, 8, 8,
+ 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
+ 8, 8, 8, 8, 8, 8, 8, 8,
+ 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
+ 8, 8, 8, 8, 8, 8, 8, 8,
+};
unsigned long msglen,
unsigned long modulus_bitlen,
unsigned char *out,
- unsigned long *outlen,
- int *is_valid)
+ unsigned long *outlen)
{
unsigned long modulus_len, ps_len, i;
- int result;
-
- /* default to invalid packet */
- *is_valid = 0;
modulus_len = (modulus_bitlen >> 3) + (modulus_bitlen & 7 ? 1 : 0);
return -EINVAL;
/* separate encoded message */
- if ((msg[0] != 0x00) || (msg[1] != (unsigned char)1)) {
- result = -EINVAL;
- goto bail;
- }
+ if ((msg[0] != 0x00) || (msg[1] != (unsigned char)1))
+ return -EINVAL;
for (i = 2; i < modulus_len - 1; i++)
if (msg[i] != 0xFF)
break;
/* separator check */
- if (msg[i] != 0) {
+ if (msg[i] != 0)
/* There was no octet with hexadecimal value 0x00
to separate ps from m. */
- result = -EINVAL;
- goto bail;
- }
+ return -EINVAL;
ps_len = i - 2;
if (*outlen < (msglen - (2 + ps_len + 1))) {
*outlen = msglen - (2 + ps_len + 1);
- result = -EOVERFLOW;
- goto bail;
+ return -EOVERFLOW;
}
*outlen = (msglen - (2 + ps_len + 1));
memcpy(out, &msg[2 + ps_len + 1], *outlen);
- /* valid packet */
- *is_valid = 1;
- result = 0;
-bail:
- return result;
+ return 0;
}
/*
unsigned long len;
unsigned long mlen, mblen;
unsigned nret, l;
- int valid, head, i;
+ int head, i;
unsigned char *out1 = NULL, *out2 = NULL;
MPI in = NULL, res = NULL, pkey[2];
uint8_t *p, *datap, *endp;
down_read(&key->sem);
ukp = key->payload.data;
+
+ if (ukp->datalen < sizeof(*pkh))
+ goto err1;
+
pkh = (struct pubkey_hdr *)ukp->data;
if (pkh->version != 1)
goto err1;
datap = pkh->mpi;
- endp = datap + ukp->datalen;
+ endp = ukp->data + ukp->datalen;
+
+ err = -ENOMEM;
for (i = 0; i < pkh->nmpi; i++) {
unsigned int remaining = endp - datap;
pkey[i] = mpi_read_from_buffer(datap, &remaining);
+ if (!pkey[i])
+ goto err;
datap += remaining;
}
mblen = mpi_get_nbits(pkey[0]);
mlen = (mblen + 7)/8;
- err = -ENOMEM;
+ if (mlen == 0)
+ goto err;
out1 = kzalloc(mlen, GFP_KERNEL);
if (!out1)
memset(out1, 0, head);
memcpy(out1 + head, p, l);
- err = -EINVAL;
- pkcs_1_v1_5_decode_emsa(out1, len, mblen, out2, &len, &valid);
+ err = pkcs_1_v1_5_decode_emsa(out1, len, mblen, out2, &len);
- if (valid && len == hlen)
+ if (!err && len == hlen)
err = memcmp(out2, h, hlen);
err:
mpi_free(res);
kfree(out1);
kfree(out2);
- mpi_free(pkey[0]);
- mpi_free(pkey[1]);
+ while (--i >= 0)
+ mpi_free(pkey[i]);
err1:
up_read(&key->sem);
"r" ((USItype)(v)) \
: "%g1", "%g2" __AND_CLOBBER_CC)
#define UMUL_TIME 39 /* 39 instructions */
-#endif
-#ifndef udiv_qrnnd
-#ifndef LONGLONG_STANDALONE
+/* It's quite necessary to add this much assembler for the sparc.
+ The default udiv_qrnnd (in C) is more than 10 times slower! */
#define udiv_qrnnd(q, r, n1, n0, d) \
-do { USItype __r; \
- (q) = __udiv_qrnnd(&__r, (n1), (n0), (d)); \
- (r) = __r; \
-} while (0)
- extern USItype __udiv_qrnnd();
-#define UDIV_TIME 140
-#endif /* LONGLONG_STANDALONE */
-#endif /* udiv_qrnnd */
+ __asm__ ("! Inlined udiv_qrnnd\n\t" \
+ "mov 32,%%g1\n\t" \
+ "subcc %1,%2,%%g0\n\t" \
+ "1: bcs 5f\n\t" \
+ "addxcc %0,%0,%0 ! shift n1n0 and a q-bit in lsb\n\t" \
+ "sub %1,%2,%1 ! this kills msb of n\n\t" \
+ "addx %1,%1,%1 ! so this can't give carry\n\t" \
+ "subcc %%g1,1,%%g1\n\t" \
+ "2: bne 1b\n\t" \
+ "subcc %1,%2,%%g0\n\t" \
+ "bcs 3f\n\t" \
+ "addxcc %0,%0,%0 ! shift n1n0 and a q-bit in lsb\n\t" \
+ "b 3f\n\t" \
+ "sub %1,%2,%1 ! this kills msb of n\n\t" \
+ "4: sub %1,%2,%1\n\t" \
+ "5: addxcc %1,%1,%1\n\t" \
+ "bcc 2b\n\t" \
+ "subcc %%g1,1,%%g1\n\t" \
+ "! Got carry from n. Subtract next step to cancel this carry.\n\t" \
+ "bne 4b\n\t" \
+ "addcc %0,%0,%0 ! shift n1n0 and a 0-bit in lsb\n\t" \
+ "sub %1,%2,%1\n\t" \
+ "3: xnor %0,0,%0\n\t" \
+ "! End of inline udiv_qrnnd\n" \
+ : "=&r" ((USItype)(q)), \
+ "=&r" ((USItype)(r)) \
+ : "r" ((USItype)(d)), \
+ "1" ((USItype)(n1)), \
+ "0" ((USItype)(n0)) : "%g1", "cc")
+#define UDIV_TIME (3+7*32) /* 7 instructions/iteration. 32 iterations. */
+#endif
#endif /* __sparc__ */
/***************************************
#include "mpi-internal.h"
#include "longlong.h"
-const unsigned char __clz_tab[] = {
- 0, 1, 2, 2, 3, 3, 3, 3, 4, 4, 4, 4, 4, 4, 4, 4, 5, 5, 5, 5, 5, 5, 5, 5,
- 5, 5, 5, 5, 5, 5, 5, 5,
- 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6,
- 6, 6, 6, 6, 6, 6, 6, 6,
- 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
- 7, 7, 7, 7, 7, 7, 7, 7,
- 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
- 7, 7, 7, 7, 7, 7, 7, 7,
- 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
- 8, 8, 8, 8, 8, 8, 8, 8,
- 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
- 8, 8, 8, 8, 8, 8, 8, 8,
- 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
- 8, 8, 8, 8, 8, 8, 8, 8,
- 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
- 8, 8, 8, 8, 8, 8, 8, 8,
-};
-
#define A_LIMB_1 ((mpi_limb_t) 1)
/****************
mpi_ptr_t marker[5];
int markidx = 0;
+ if (!dsize)
+ return -EINVAL;
+
memset(marker, 0, sizeof(marker));
/* Ensure space is enough for quotient and remainder.
* numerator would be gradually overwritten by the quotient limbs. */
if (qp == np) { /* Copy NP object to temporary space. */
np = marker[markidx++] = mpi_alloc_limb_space(nsize);
+ if (!np)
+ goto nomem;
MPN_COPY(np, qp, nsize);
}
} else /* Put quotient at top of remainder. */
ep = exp->d;
if (!msize)
- msize = 1 / msize; /* provoke a signal */
+ return -EINVAL;
if (!esize) {
/* Exponent is zero, result is 1 mod MOD, i.e., 1 or 0
#include "mpi-internal.h"
-#define DIM(v) (sizeof(v)/sizeof((v)[0]))
#define MAX_EXTERN_MPI_BITS 16384
-static uint8_t asn[15] = /* Object ID is 1.3.14.3.2.26 */
-{ 0x30, 0x21, 0x30, 0x09, 0x06, 0x05, 0x2b, 0x0e, 0x03,
- 0x02, 0x1a, 0x05, 0x00, 0x04, 0x14
-};
-
-MPI do_encode_md(const void *sha_buffer, unsigned nbits)
-{
- int nframe = (nbits + 7) / 8;
- uint8_t *frame, *fr_pt;
- int i = 0, n;
- size_t asnlen = DIM(asn);
- MPI a = MPI_NULL;
-
- if (SHA1_DIGEST_LENGTH + asnlen + 4 > nframe)
- pr_info("MPI: can't encode a %d bit MD into a %d bits frame\n",
- (int)(SHA1_DIGEST_LENGTH * 8), (int)nbits);
-
- /* We encode the MD in this way:
- *
- * 0 A PAD(n bytes) 0 ASN(asnlen bytes) MD(len bytes)
- *
- * PAD consists of FF bytes.
- */
- frame = kmalloc(nframe, GFP_KERNEL);
- if (!frame)
- return MPI_NULL;
- n = 0;
- frame[n++] = 0;
- frame[n++] = 1; /* block type */
- i = nframe - SHA1_DIGEST_LENGTH - asnlen - 3;
-
- if (i <= 1) {
- pr_info("MPI: message digest encoding failed\n");
- kfree(frame);
- return a;
- }
-
- memset(frame + n, 0xff, i);
- n += i;
- frame[n++] = 0;
- memcpy(frame + n, &asn, asnlen);
- n += asnlen;
- memcpy(frame + n, sha_buffer, SHA1_DIGEST_LENGTH);
- n += SHA1_DIGEST_LENGTH;
-
- i = nframe;
- fr_pt = frame;
-
- if (n != nframe) {
- printk
- ("MPI: message digest encoding failed, frame length is wrong\n");
- kfree(frame);
- return a;
- }
-
- a = mpi_alloc((nframe + BYTES_PER_MPI_LIMB - 1) / BYTES_PER_MPI_LIMB);
- mpi_set_buffer(a, frame, nframe, 0);
- kfree(frame);
-
- return a;
-}
-
MPI mpi_read_from_buffer(const void *xbuffer, unsigned *ret_nread)
{
const uint8_t *buffer = xbuffer;
int i, j;
unsigned nbits, nbytes, nlimbs, nread = 0;
mpi_limb_t a;
- MPI val = MPI_NULL;
+ MPI val = NULL;
if (*ret_nread < 2)
goto leave;
nlimbs = (nbytes + BYTES_PER_MPI_LIMB - 1) / BYTES_PER_MPI_LIMB;
val = mpi_alloc(nlimbs);
if (!val)
- return MPI_NULL;
+ return NULL;
i = BYTES_PER_MPI_LIMB - nbytes % BYTES_PER_MPI_LIMB;
i %= BYTES_PER_MPI_LIMB;
val->nbits = nbits;
}
EXPORT_SYMBOL_GPL(mpi_fromstr);
-/****************
- * Special function to get the low 8 bytes from an mpi.
- * This can be used as a keyid; KEYID is an 2 element array.
- * Return the low 4 bytes.
- */
-u32 mpi_get_keyid(const MPI a, u32 *keyid)
-{
-#if BYTES_PER_MPI_LIMB == 4
- if (keyid) {
- keyid[0] = a->nlimbs >= 2 ? a->d[1] : 0;
- keyid[1] = a->nlimbs >= 1 ? a->d[0] : 0;
- }
- return a->nlimbs >= 1 ? a->d[0] : 0;
-#elif BYTES_PER_MPI_LIMB == 8
- if (keyid) {
- keyid[0] = a->nlimbs ? (u32) (a->d[0] >> 32) : 0;
- keyid[1] = a->nlimbs ? (u32) (a->d[0] & 0xffffffff) : 0;
- }
- return a->nlimbs ? (u32) (a->d[0] & 0xffffffff) : 0;
-#else
-#error Make this function work with other LIMB sizes
-#endif
-}
-
/****************
* Return an allocated buffer with the MPI (msb first).
* NBYTES receives the length of this buffer. Caller must free the
case 0:
/* We are asked to divide by zero, so go ahead and do it! (To make
the compiler not remove this statement, return the value.) */
+ /*
+ * existing clients of this function have been modified
+ * not to call it with dsize == 0, so this should not happen
+ */
return 1 / dsize;
case 1:
{
size_t len = nlimbs * sizeof(mpi_limb_t);
+ if (!len)
+ return NULL;
+
return kmalloc(len, GFP_KERNEL);
}
size_t i;
MPI b;
- *copied = MPI_NULL;
+ *copied = NULL;
if (a) {
b = mpi_alloc(a->nlimbs);
if (maxlen && len > maxlen)
len = maxlen;
if (flags & IORESOURCE_IO)
- return ioport_map(start, len);
+ return __pci_ioport_map(dev, start, len);
if (flags & IORESOURCE_MEM) {
if (flags & IORESOURCE_CACHEABLE)
return ioremap(start, len);
} else if (!locked)
spin_lock_irq(&zone->lru_lock);
+ /*
+ * migrate_pfn does not necessarily start aligned to a
+ * pageblock. Ensure that pfn_valid is called when moving
+ * into a new MAX_ORDER_NR_PAGES range in case of large
+ * memory holes within the zone
+ */
+ if ((low_pfn & (MAX_ORDER_NR_PAGES - 1)) == 0) {
+ if (!pfn_valid(low_pfn)) {
+ low_pfn += MAX_ORDER_NR_PAGES - 1;
+ continue;
+ }
+ }
+
if (!pfn_valid_within(low_pfn))
continue;
nr_scanned++;
- /* Get the page and skip if free */
+ /*
+ * Get the page and ensure the page is within the same zone.
+ * See the comment in isolate_freepages about overlapping
+ * nodes. It is deliberate that the new zone lock is not taken
+ * as memory compaction should not move pages between nodes.
+ */
page = pfn_to_page(low_pfn);
+ if (page_zone(page) != zone)
+ continue;
+
+ /* Skip if free */
if (PageBuddy(page))
continue;
unsigned long seg = 0;
size_t count;
loff_t *ppos = &iocb->ki_pos;
- struct blk_plug plug;
count = 0;
retval = generic_segment_checks(iov, &nr_segs, &count, VERIFY_WRITE);
if (retval)
return retval;
- blk_start_plug(&plug);
-
/* coalesce the iovecs and go direct-to-BIO for O_DIRECT */
if (filp->f_flags & O_DIRECT) {
loff_t size;
retval = filemap_write_and_wait_range(mapping, pos,
pos + iov_length(iov, nr_segs) - 1);
if (!retval) {
+ struct blk_plug plug;
+
+ blk_start_plug(&plug);
retval = mapping->a_ops->direct_IO(READ, iocb,
iov, pos, nr_segs);
+ blk_finish_plug(&plug);
}
if (retval > 0) {
*ppos = pos + retval;
break;
}
out:
- blk_finish_plug(&plug);
return retval;
}
EXPORT_SYMBOL(generic_file_aio_read);
xip_pfn);
if (err == -ENOMEM)
return VM_FAULT_OOM;
- BUG_ON(err);
+ /*
+ * err == -EBUSY is fine, we've raced against another thread
+ * that faulted-in the same page
+ */
+ if (err != -EBUSY)
+ BUG_ON(err);
return VM_FAULT_NOPAGE;
} else {
int err, ret = VM_FAULT_OOM;
{
struct mm_struct *mm = mm_slot->mm;
- VM_BUG_ON(!spin_is_locked(&khugepaged_mm_lock));
+ VM_BUG_ON(NR_CPUS != 1 && !spin_is_locked(&khugepaged_mm_lock));
if (khugepaged_test_exit(mm)) {
/* free mm_slot */
int progress = 0;
VM_BUG_ON(!pages);
- VM_BUG_ON(!spin_is_locked(&khugepaged_mm_lock));
+ VM_BUG_ON(NR_CPUS != 1 && !spin_is_locked(&khugepaged_mm_lock));
if (khugepaged_scan.mm_slot)
mm_slot = khugepaged_scan.mm_slot;
{
pr_debug("%s(0x%p)\n", __func__, ptr);
- if (atomic_read(&kmemleak_enabled) && ptr && !IS_ERR(ptr))
+ if (atomic_read(&kmemleak_enabled) && ptr && size && !IS_ERR(ptr))
add_scan_area((unsigned long)ptr, size, gfp);
else if (atomic_read(&kmemleak_early_log))
log_early(KMEMLEAK_SCAN_AREA, ptr, size, 0);
#ifdef CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF
if (!kmemleak_skip_disable) {
+ atomic_set(&kmemleak_early_log, 0);
kmemleak_disable();
return;
}
/* threshold event is triggered in finer grain than soft limit */
if (unlikely(mem_cgroup_event_ratelimit(memcg,
MEM_CGROUP_TARGET_THRESH))) {
- bool do_softlimit, do_numainfo;
+ bool do_softlimit;
+ bool do_numainfo __maybe_unused;
do_softlimit = mem_cgroup_event_ratelimit(memcg,
MEM_CGROUP_TARGET_SOFTLIMIT);
ClearPageSwapCache(page);
ClearPagePrivate(page);
set_page_private(page, 0);
- page->mapping = NULL;
/*
* If any waiters have accumulated on the new page then
} else {
if (remap_swapcache)
remove_migration_ptes(page, newpage);
+ page->mapping = NULL;
}
unlock_page(newpage);
goto free_proc_pages;
}
- task_lock(task);
- if (__ptrace_may_access(task, PTRACE_MODE_ATTACH)) {
- task_unlock(task);
- rc = -EPERM;
- goto put_task_struct;
- }
- mm = task->mm;
-
- if (!mm || (task->flags & PF_KTHREAD)) {
- task_unlock(task);
- rc = -EINVAL;
+ mm = mm_access(task, PTRACE_MODE_ATTACH);
+ if (!mm || IS_ERR(mm)) {
+ rc = IS_ERR(mm) ? PTR_ERR(mm) : -ESRCH;
+ /*
+ * Explicitly map EACCES to EPERM as EPERM is a more a
+ * appropriate error code for process_vw_readv/writev
+ */
+ if (rc == -EACCES)
+ rc = -EPERM;
goto put_task_struct;
}
- atomic_inc(&mm->mm_users);
- task_unlock(task);
-
for (i = 0; i < riovcnt && iov_l_curr_idx < liovcnt; i++) {
rc = process_vm_rw_single_vec(
(unsigned long)rvec[i].iov_base, rvec[i].iov_len,
VM_BUG_ON(!PageHead(page));
VM_BUG_ON(PageCompound(page_tail));
VM_BUG_ON(PageLRU(page_tail));
- VM_BUG_ON(!spin_is_locked(&zone->lru_lock));
+ VM_BUG_ON(NR_CPUS != 1 && !spin_is_locked(&zone->lru_lock));
SetPageLRU(page_tail);
} else {
pr_info("client%lld fsid %pU\n", ceph_client_id(client), fsid);
memcpy(&client->fsid, fsid, sizeof(*fsid));
- ceph_debugfs_client_init(client);
- client->have_fsid = true;
}
return 0;
}
#include <linux/ceph/mon_client.h>
#include <linux/ceph/libceph.h>
+#include <linux/ceph/debugfs.h>
#include <linux/ceph/decode.h>
-
#include <linux/ceph/auth.h>
/*
client->monc.monmap = monmap;
kfree(old);
+ if (!client->have_fsid) {
+ client->have_fsid = true;
+ mutex_unlock(&monc->mutex);
+ /*
+ * do debugfs initialization without mutex to avoid
+ * creating a locking dependency
+ */
+ ceph_debugfs_client_init(client);
+ goto out_unlocked;
+ }
out:
mutex_unlock(&monc->mutex);
+out_unlocked:
wake_up_all(&client->auth_wq);
}
my $pre_ctx = "$1$2";
my ($level, @ctx) = ctx_statement_level($linenr, $realcnt, 0);
+
+ if ($line =~ /^\+\t{6,}/) {
+ WARN("DEEP_INDENTATION",
+ "Too many leading tabs - consider code refactoring\n" . $herecurr);
+ }
+
my $ctx_cnt = $realcnt - $#ctx - 1;
my $ctx = join("\n", @ctx);
#include "emu8000_local.h"
#include <asm/uaccess.h>
#include <linux/moduleparam.h>
-#include <linux/moduleparam.h>
static int emu8000_reset_addr;
module_param(emu8000_reset_addr, int, 0444);
for (i = 0; i < c->cvt_setups.used; i++) {
p = snd_array_elem(&c->cvt_setups, i);
if (!p->active && p->stream_tag == stream_tag &&
- get_wcaps_type(get_wcaps(codec, p->nid)) == type)
+ get_wcaps_type(get_wcaps(c, p->nid)) == type)
p->dirty = 1;
}
}
EXPORT_SYMBOL_HDA(snd_hda_jack_add_kctl);
static int add_jack_kctl(struct hda_codec *codec, hda_nid_t nid,
- const struct auto_pin_cfg *cfg)
+ const struct auto_pin_cfg *cfg,
+ char *lastname, int *lastidx)
{
unsigned int def_conf, conn;
char name[44];
return 0;
snd_hda_get_pin_label(codec, nid, cfg, name, sizeof(name), &idx);
+ if (!strcmp(name, lastname) && idx == *lastidx)
+ idx++;
+ strncpy(lastname, name, 44);
+ *lastidx = idx;
err = snd_hda_jack_add_kctl(codec, nid, name, idx);
if (err < 0)
return err;
const struct auto_pin_cfg *cfg)
{
const hda_nid_t *p;
- int i, err;
+ int i, err, lastidx = 0;
+ char lastname[44] = "";
for (i = 0, p = cfg->line_out_pins; i < cfg->line_outs; i++, p++) {
- err = add_jack_kctl(codec, *p, cfg);
+ err = add_jack_kctl(codec, *p, cfg, lastname, &lastidx);
if (err < 0)
return err;
}
for (i = 0, p = cfg->hp_pins; i < cfg->hp_outs; i++, p++) {
if (*p == *cfg->line_out_pins) /* might be duplicated */
break;
- err = add_jack_kctl(codec, *p, cfg);
+ err = add_jack_kctl(codec, *p, cfg, lastname, &lastidx);
if (err < 0)
return err;
}
for (i = 0, p = cfg->speaker_pins; i < cfg->speaker_outs; i++, p++) {
if (*p == *cfg->line_out_pins) /* might be duplicated */
break;
- err = add_jack_kctl(codec, *p, cfg);
+ err = add_jack_kctl(codec, *p, cfg, lastname, &lastidx);
if (err < 0)
return err;
}
for (i = 0; i < cfg->num_inputs; i++) {
- err = add_jack_kctl(codec, cfg->inputs[i].pin, cfg);
+ err = add_jack_kctl(codec, cfg->inputs[i].pin, cfg, lastname, &lastidx);
if (err < 0)
return err;
}
for (i = 0, p = cfg->dig_out_pins; i < cfg->dig_outs; i++, p++) {
- err = add_jack_kctl(codec, *p, cfg);
+ err = add_jack_kctl(codec, *p, cfg, lastname, &lastidx);
if (err < 0)
return err;
}
- err = add_jack_kctl(codec, cfg->dig_in_pin, cfg);
+ err = add_jack_kctl(codec, cfg->dig_in_pin, cfg, lastname, &lastidx);
if (err < 0)
return err;
- err = add_jack_kctl(codec, cfg->mono_out_pin, cfg);
+ err = add_jack_kctl(codec, cfg->mono_out_pin, cfg, lastname, &lastidx);
if (err < 0)
return err;
return 0;
err = chipio_read(codec, REG_CODEC_MUTE, &data);
if (err < 0)
- return err;
+ goto exit;
/* *valp 0 is mute, 1 is unmute */
data = (data & 0x7f) | (*valp ? 0 : 0x80);
- chipio_write(codec, REG_CODEC_MUTE, data);
+ err = chipio_write(codec, REG_CODEC_MUTE, data);
if (err < 0)
- return err;
+ goto exit;
spec->curr_hp_switch = *valp;
+ exit:
snd_hda_power_down(codec);
- return 1;
+ return err < 0 ? err : 1;
}
static int ca0132_speaker_switch_get(struct snd_kcontrol *kcontrol,
err = chipio_read(codec, REG_CODEC_MUTE, &data);
if (err < 0)
- return err;
+ goto exit;
/* *valp 0 is mute, 1 is unmute */
data = (data & 0xef) | (*valp ? 0 : 0x10);
- chipio_write(codec, REG_CODEC_MUTE, data);
+ err = chipio_write(codec, REG_CODEC_MUTE, data);
if (err < 0)
- return err;
+ goto exit;
spec->curr_speaker_switch = *valp;
+ exit:
snd_hda_power_down(codec);
- return 1;
+ return err < 0 ? err : 1;
}
static int ca0132_hp_volume_get(struct snd_kcontrol *kcontrol,
err = chipio_read(codec, REG_CODEC_HP_VOL_L, &data);
if (err < 0)
- return err;
+ goto exit;
val = 31 - left_vol;
data = (data & 0xe0) | val;
- chipio_write(codec, REG_CODEC_HP_VOL_L, data);
+ err = chipio_write(codec, REG_CODEC_HP_VOL_L, data);
if (err < 0)
- return err;
+ goto exit;
val = 31 - right_vol;
data = (data & 0xe0) | val;
- chipio_write(codec, REG_CODEC_HP_VOL_R, data);
+ err = chipio_write(codec, REG_CODEC_HP_VOL_R, data);
if (err < 0)
- return err;
+ goto exit;
spec->curr_hp_volume[0] = left_vol;
spec->curr_hp_volume[1] = right_vol;
+ exit:
snd_hda_power_down(codec);
- return 1;
+ return err < 0 ? err : 1;
}
static int add_hp_switch(struct hda_codec *codec, hda_nid_t nid)
if (err < 0)
return err;
err = add_in_volume(codec, spec->dig_in, "IEC958");
+ if (err < 0)
+ return err;
}
return 0;
}
change_cur_input(codec, !spec->automic_idx, 0);
} else {
if (present) {
- spec->last_input = spec->cur_input;
- spec->cur_input = spec->automic_idx;
+ if (spec->cur_input != spec->automic_idx) {
+ spec->last_input = spec->cur_input;
+ spec->cur_input = spec->automic_idx;
+ }
} else {
spec->cur_input = spec->last_input;
}
unsigned int detect_lo:1; /* Line-out detection enabled */
unsigned int automute_speaker_possible:1; /* there are speakers and either LO or HP */
unsigned int automute_lo_possible:1; /* there are line outs and HP */
+ unsigned int keep_vref_in_automute:1; /* Don't clear VREF in automute */
/* other flags */
unsigned int no_analog :1; /* digital I/O only */
for (i = 0; i < num_pins; i++) {
hda_nid_t nid = pins[i];
+ unsigned int val;
if (!nid)
break;
switch (spec->automute_mode) {
case ALC_AUTOMUTE_PIN:
+ /* don't reset VREF value in case it's controlling
+ * the amp (see alc861_fixup_asus_amp_vref_0f())
+ */
+ if (spec->keep_vref_in_automute) {
+ val = snd_hda_codec_read(codec, nid, 0,
+ AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
+ val &= ~PIN_HP;
+ } else
+ val = 0;
+ val |= pin_bits;
snd_hda_codec_write(codec, nid, 0,
AC_VERB_SET_PIN_WIDGET_CONTROL,
- pin_bits);
+ val);
break;
case ALC_AUTOMUTE_AMP:
snd_hda_codec_amp_stereo(codec, nid, HDA_OUTPUT, 0,
"Speaker Playback Volume",
"Mono Playback Volume",
"Line-Out Playback Volume",
+ "CLFE Playback Volume",
+ "Bass Speaker Playback Volume",
"PCM Playback Volume",
NULL,
};
"Mono Playback Switch",
"IEC958 Playback Switch",
"Line-Out Playback Switch",
+ "CLFE Playback Switch",
+ "Bass Speaker Playback Switch",
"PCM Playback Switch",
NULL,
};
"%s Analog", codec->chip_name);
info->name = spec->stream_name_analog;
- if (spec->multiout.dac_nids > 0) {
+ if (spec->multiout.num_dacs > 0) {
p = spec->stream_analog_playback;
if (!p)
p = &alc_pcm_analog_playback;
ALC262_FIXUP_FSC_H270,
ALC262_FIXUP_HP_Z200,
ALC262_FIXUP_TYAN,
- ALC262_FIXUP_TOSHIBA_RX1,
ALC262_FIXUP_LENOVO_3000,
ALC262_FIXUP_BENQ,
ALC262_FIXUP_BENQ_T31,
{ }
}
},
- [ALC262_FIXUP_TOSHIBA_RX1] = {
- .type = ALC_FIXUP_PINS,
- .v.pins = (const struct alc_pincfg[]) {
- { 0x14, 0x90170110 }, /* speaker */
- { 0x15, 0x0421101f }, /* HP */
- { 0x1a, 0x40f000f0 }, /* N/A */
- { 0x1b, 0x40f000f0 }, /* N/A */
- { 0x1e, 0x40f000f0 }, /* N/A */
- }
- },
[ALC262_FIXUP_LENOVO_3000] = {
.type = ALC_FIXUP_VERBS,
.v.verbs = (const struct hda_verb[]) {
SND_PCI_QUIRK(0x10cf, 0x1397, "Fujitsu", ALC262_FIXUP_BENQ),
SND_PCI_QUIRK(0x10cf, 0x142d, "Fujitsu Lifebook E8410", ALC262_FIXUP_BENQ),
SND_PCI_QUIRK(0x10f1, 0x2915, "Tyan Thunder n6650W", ALC262_FIXUP_TYAN),
- SND_PCI_QUIRK(0x1179, 0x0001, "Toshiba dynabook SS RX1",
- ALC262_FIXUP_TOSHIBA_RX1),
SND_PCI_QUIRK(0x1734, 0x1147, "FSC Celsius H270", ALC262_FIXUP_FSC_H270),
SND_PCI_QUIRK(0x17aa, 0x384e, "Lenovo 3000", ALC262_FIXUP_LENOVO_3000),
SND_PCI_QUIRK(0x17ff, 0x0560, "Benq ED8", ALC262_FIXUP_BENQ),
SND_PCI_QUIRK(0x1043, 0x8330, "ASUS Eeepc P703 P900A",
ALC269_FIXUP_AMIC),
SND_PCI_QUIRK(0x1043, 0x1013, "ASUS N61Da", ALC269_FIXUP_AMIC),
- SND_PCI_QUIRK(0x1043, 0x1113, "ASUS N63Jn", ALC269_FIXUP_AMIC),
SND_PCI_QUIRK(0x1043, 0x1143, "ASUS B53f", ALC269_FIXUP_AMIC),
SND_PCI_QUIRK(0x1043, 0x1133, "ASUS UJ20ft", ALC269_FIXUP_AMIC),
SND_PCI_QUIRK(0x1043, 0x1183, "ASUS K72DR", ALC269_FIXUP_AMIC),
PINFIX_ASUS_A6RP,
};
+/* On some laptops, VREF of pin 0x0f is abused for controlling the main amp */
+static void alc861_fixup_asus_amp_vref_0f(struct hda_codec *codec,
+ const struct alc_fixup *fix, int action)
+{
+ struct alc_spec *spec = codec->spec;
+ unsigned int val;
+
+ if (action != ALC_FIXUP_ACT_INIT)
+ return;
+ val = snd_hda_codec_read(codec, 0x0f, 0,
+ AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
+ if (!(val & (AC_PINCTL_IN_EN | AC_PINCTL_OUT_EN)))
+ val |= AC_PINCTL_IN_EN;
+ val |= AC_PINCTL_VREF_50;
+ snd_hda_codec_write(codec, 0x0f, 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL, val);
+ spec->keep_vref_in_automute = 1;
+}
+
static const struct alc_fixup alc861_fixups[] = {
[PINFIX_FSC_AMILO_PI1505] = {
.type = ALC_FIXUP_PINS,
}
},
[PINFIX_ASUS_A6RP] = {
- .type = ALC_FIXUP_VERBS,
- .v.verbs = (const struct hda_verb[]) {
- /* node 0x0f VREF seems controlling the master output */
- { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50 },
- { }
- },
+ .type = ALC_FIXUP_FUNC,
+ .v.func = alc861_fixup_asus_amp_vref_0f,
},
};
static const struct snd_pci_quirk alc861_fixup_tbl[] = {
- SND_PCI_QUIRK(0x1043, 0x1393, "ASUS A6Rp", PINFIX_ASUS_A6RP),
+ SND_PCI_QUIRK_VENDOR(0x1043, "ASUS laptop", PINFIX_ASUS_A6RP),
+ SND_PCI_QUIRK(0x1584, 0x0000, "Uniwill ECS M31EI", PINFIX_ASUS_A6RP),
SND_PCI_QUIRK(0x1584, 0x2b01, "Haier W18", PINFIX_ASUS_A6RP),
SND_PCI_QUIRK(0x1734, 0x10c7, "FSC Amilo Pi1505", PINFIX_FSC_AMILO_PI1505),
{}
unsigned int no_pin_power_ctl;
enum VIA_HDA_CODEC codec_type;
+ /* analog low-power control */
+ bool alc_mode;
+
/* smart51 setup */
unsigned int smart51_nums;
hda_nid_t smart51_pins[2];
}
}
+static void update_power_state(struct hda_codec *codec, hda_nid_t nid,
+ unsigned int parm)
+{
+ if (snd_hda_codec_read(codec, nid, 0,
+ AC_VERB_GET_POWER_STATE, 0) == parm)
+ return;
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_POWER_STATE, parm);
+}
+
static void set_pin_power_state(struct hda_codec *codec, hda_nid_t nid,
unsigned int *affected_parm)
{
} else
parm = AC_PWRST_D3;
- snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_POWER_STATE, parm);
+ update_power_state(codec, nid, parm);
}
static int via_pin_power_ctl_info(struct snd_kcontrol *kcontrol,
return 0;
spec->no_pin_power_ctl = val;
set_widgets_power_state(codec);
+ analog_low_current_mode(codec);
return 1;
}
}
/* enter/exit analog low-current mode */
-static void analog_low_current_mode(struct hda_codec *codec)
+static void __analog_low_current_mode(struct hda_codec *codec, bool force)
{
struct via_spec *spec = codec->spec;
bool enable;
unsigned int verb, parm;
- enable = is_aa_path_mute(codec) && (spec->opened_streams != 0);
+ if (spec->no_pin_power_ctl)
+ enable = false;
+ else
+ enable = is_aa_path_mute(codec) && !spec->opened_streams;
+ if (enable == spec->alc_mode && !force)
+ return;
+ spec->alc_mode = enable;
/* decide low current mode's verb & parameter */
switch (spec->codec_type) {
snd_hda_codec_write(codec, codec->afg, 0, verb, parm);
}
+static void analog_low_current_mode(struct hda_codec *codec)
+{
+ return __analog_low_current_mode(codec, false);
+}
+
/*
* generic initialization of ADC, input mixers and output mixers
*/
struct snd_kcontrol *kctl;
int err, i;
+ spec->no_pin_power_ctl = 1;
if (spec->set_widgets_power_state)
if (!via_clone_control(spec, &via_pin_power_ctl_enum))
return -ENOMEM;
return err;
}
- /* init power states */
- set_widgets_power_state(codec);
- analog_low_current_mode(codec);
-
via_free_kctls(codec); /* no longer needed */
err = snd_hda_jack_add_kctls(codec, &spec->autocfg);
if (mux) {
/* switch to D0 beofre change index */
- if (snd_hda_codec_read(codec, mux, 0,
- AC_VERB_GET_POWER_STATE, 0x00) != AC_PWRST_D0)
- snd_hda_codec_write(codec, mux, 0,
- AC_VERB_SET_POWER_STATE, AC_PWRST_D0);
+ update_power_state(codec, mux, AC_PWRST_D0);
snd_hda_codec_write(codec, mux, 0,
AC_VERB_SET_CONNECT_SEL,
spec->inputs[cur].mux_idx);
for (i = 0; i < spec->num_iverbs; i++)
snd_hda_sequence_write(codec, spec->init_verbs[i]);
+ /* init power states */
+ set_widgets_power_state(codec);
+ __analog_low_current_mode(codec, true);
+
via_auto_init_multi_out(codec);
via_auto_init_hp_out(codec);
via_auto_init_speaker_out(codec);
if (imux_is_smixer)
parm = AC_PWRST_D0;
/* SW0 (17h), AIW 0/1 (13h/14h) */
- snd_hda_codec_write(codec, 0x17, 0, AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0x13, 0, AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0x14, 0, AC_VERB_SET_POWER_STATE, parm);
+ update_power_state(codec, 0x17, parm);
+ update_power_state(codec, 0x13, parm);
+ update_power_state(codec, 0x14, parm);
/* outputs */
/* PW0 (19h), SW1 (18h), AOW1 (11h) */
set_pin_power_state(codec, 0x19, &parm);
if (spec->smart51_enabled)
set_pin_power_state(codec, 0x1b, &parm);
- snd_hda_codec_write(codec, 0x18, 0, AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0x11, 0, AC_VERB_SET_POWER_STATE, parm);
+ update_power_state(codec, 0x18, parm);
+ update_power_state(codec, 0x11, parm);
/* PW6 (22h), SW2 (26h), AOW2 (24h) */
if (is_8ch) {
set_pin_power_state(codec, 0x22, &parm);
if (spec->smart51_enabled)
set_pin_power_state(codec, 0x1a, &parm);
- snd_hda_codec_write(codec, 0x26, 0,
- AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0x24, 0,
- AC_VERB_SET_POWER_STATE, parm);
+ update_power_state(codec, 0x26, parm);
+ update_power_state(codec, 0x24, parm);
} else if (codec->vendor_id == 0x11064397) {
/* PW7(23h), SW2(27h), AOW2(25h) */
parm = AC_PWRST_D3;
set_pin_power_state(codec, 0x23, &parm);
if (spec->smart51_enabled)
set_pin_power_state(codec, 0x1a, &parm);
- snd_hda_codec_write(codec, 0x27, 0,
- AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0x25, 0,
- AC_VERB_SET_POWER_STATE, parm);
+ update_power_state(codec, 0x27, parm);
+ update_power_state(codec, 0x25, parm);
}
/* PW 3/4/7 (1ch/1dh/23h) */
set_pin_power_state(codec, 0x23, &parm);
/* MW0 (16h), Sw3 (27h), AOW 0/3 (10h/25h) */
- snd_hda_codec_write(codec, 0x16, 0, AC_VERB_SET_POWER_STATE,
- imux_is_smixer ? AC_PWRST_D0 : parm);
- snd_hda_codec_write(codec, 0x10, 0, AC_VERB_SET_POWER_STATE, parm);
+ update_power_state(codec, 0x16, imux_is_smixer ? AC_PWRST_D0 : parm);
+ update_power_state(codec, 0x10, parm);
if (is_8ch) {
- snd_hda_codec_write(codec, 0x25, 0,
- AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0x27, 0,
- AC_VERB_SET_POWER_STATE, parm);
+ update_power_state(codec, 0x25, parm);
+ update_power_state(codec, 0x27, parm);
} else if (codec->vendor_id == 0x11064397 && spec->hp_independent_mode)
- snd_hda_codec_write(codec, 0x25, 0,
- AC_VERB_SET_POWER_STATE, parm);
+ update_power_state(codec, 0x25, parm);
}
static int patch_vt1708S(struct hda_codec *codec);
if (imux_is_smixer)
parm = AC_PWRST_D0; /* SW0 (13h) = stereo mixer (idx 3) */
/* SW0 (13h), AIW 0/1/2 (12h/1fh/20h) */
- snd_hda_codec_write(codec, 0x13, 0, AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0x12, 0, AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0x1f, 0, AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0x20, 0, AC_VERB_SET_POWER_STATE, parm);
+ update_power_state(codec, 0x13, parm);
+ update_power_state(codec, 0x12, parm);
+ update_power_state(codec, 0x1f, parm);
+ update_power_state(codec, 0x20, parm);
/* outputs */
/* PW 3/4 (16h/17h) */
set_pin_power_state(codec, 0x17, &parm);
set_pin_power_state(codec, 0x16, &parm);
/* MW0 (1ah), AOW 0/1 (10h/1dh) */
- snd_hda_codec_write(codec, 0x1a, 0, AC_VERB_SET_POWER_STATE,
- imux_is_smixer ? AC_PWRST_D0 : parm);
- snd_hda_codec_write(codec, 0x10, 0, AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0x1d, 0, AC_VERB_SET_POWER_STATE, parm);
+ update_power_state(codec, 0x1a, imux_is_smixer ? AC_PWRST_D0 : parm);
+ update_power_state(codec, 0x10, parm);
+ update_power_state(codec, 0x1d, parm);
}
static int patch_vt1702(struct hda_codec *codec)
if (imux_is_smixer)
parm = AC_PWRST_D0;
/* MUX6/7 (1eh/1fh), AIW 0/1 (10h/11h) */
- snd_hda_codec_write(codec, 0x1e, 0, AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0x1f, 0, AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0x10, 0, AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0x11, 0, AC_VERB_SET_POWER_STATE, parm);
+ update_power_state(codec, 0x1e, parm);
+ update_power_state(codec, 0x1f, parm);
+ update_power_state(codec, 0x10, parm);
+ update_power_state(codec, 0x11, parm);
/* outputs */
/* PW3 (27h), MW2 (1ah), AOW3 (bh) */
parm = AC_PWRST_D3;
set_pin_power_state(codec, 0x27, &parm);
- snd_hda_codec_write(codec, 0x1a, 0, AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0xb, 0, AC_VERB_SET_POWER_STATE, parm);
+ update_power_state(codec, 0x1a, parm);
+ update_power_state(codec, 0xb, parm);
/* PW2 (26h), AOW2 (ah) */
parm = AC_PWRST_D3;
set_pin_power_state(codec, 0x26, &parm);
if (spec->smart51_enabled)
set_pin_power_state(codec, 0x2b, &parm);
- snd_hda_codec_write(codec, 0xa, 0, AC_VERB_SET_POWER_STATE, parm);
+ update_power_state(codec, 0xa, parm);
/* PW0 (24h), AOW0 (8h) */
parm = AC_PWRST_D3;
set_pin_power_state(codec, 0x24, &parm);
if (!spec->hp_independent_mode) /* check for redirected HP */
set_pin_power_state(codec, 0x28, &parm);
- snd_hda_codec_write(codec, 0x8, 0, AC_VERB_SET_POWER_STATE, parm);
+ update_power_state(codec, 0x8, parm);
/* MW9 (21h), Mw2 (1ah), AOW0 (8h) */
- snd_hda_codec_write(codec, 0x21, 0, AC_VERB_SET_POWER_STATE,
- imux_is_smixer ? AC_PWRST_D0 : parm);
+ update_power_state(codec, 0x21, imux_is_smixer ? AC_PWRST_D0 : parm);
/* PW1 (25h), AOW1 (9h) */
parm = AC_PWRST_D3;
set_pin_power_state(codec, 0x25, &parm);
if (spec->smart51_enabled)
set_pin_power_state(codec, 0x2a, &parm);
- snd_hda_codec_write(codec, 0x9, 0, AC_VERB_SET_POWER_STATE, parm);
+ update_power_state(codec, 0x9, parm);
if (spec->hp_independent_mode) {
/* PW4 (28h), MW3 (1bh), MUX1(34h), AOW4 (ch) */
parm = AC_PWRST_D3;
set_pin_power_state(codec, 0x28, &parm);
- snd_hda_codec_write(codec, 0x1b, 0,
- AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0x34, 0,
- AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0xc, 0,
- AC_VERB_SET_POWER_STATE, parm);
+ update_power_state(codec, 0x1b, parm);
+ update_power_state(codec, 0x34, parm);
+ update_power_state(codec, 0xc, parm);
}
}
if (imux_is_smixer)
parm = AC_PWRST_D0;
/* SW0 (17h), AIW0(13h) */
- snd_hda_codec_write(codec, 0x17, 0, AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0x13, 0, AC_VERB_SET_POWER_STATE, parm);
+ update_power_state(codec, 0x17, parm);
+ update_power_state(codec, 0x13, parm);
parm = AC_PWRST_D3;
set_pin_power_state(codec, 0x1e, &parm);
if (spec->dmic_enabled)
set_pin_power_state(codec, 0x22, &parm);
else
- snd_hda_codec_write(codec, 0x22, 0,
- AC_VERB_SET_POWER_STATE, AC_PWRST_D3);
+ update_power_state(codec, 0x22, AC_PWRST_D3);
/* SW2(26h), AIW1(14h) */
- snd_hda_codec_write(codec, 0x26, 0, AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0x14, 0, AC_VERB_SET_POWER_STATE, parm);
+ update_power_state(codec, 0x26, parm);
+ update_power_state(codec, 0x14, parm);
/* outputs */
/* PW0 (19h), SW1 (18h), AOW1 (11h) */
/* Smart 5.1 PW2(1bh) */
if (spec->smart51_enabled)
set_pin_power_state(codec, 0x1b, &parm);
- snd_hda_codec_write(codec, 0x18, 0, AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0x11, 0, AC_VERB_SET_POWER_STATE, parm);
+ update_power_state(codec, 0x18, parm);
+ update_power_state(codec, 0x11, parm);
/* PW7 (23h), SW3 (27h), AOW3 (25h) */
parm = AC_PWRST_D3;
/* Smart 5.1 PW1(1ah) */
if (spec->smart51_enabled)
set_pin_power_state(codec, 0x1a, &parm);
- snd_hda_codec_write(codec, 0x27, 0, AC_VERB_SET_POWER_STATE, parm);
+ update_power_state(codec, 0x27, parm);
/* Smart 5.1 PW5(1eh) */
if (spec->smart51_enabled)
set_pin_power_state(codec, 0x1e, &parm);
- snd_hda_codec_write(codec, 0x25, 0, AC_VERB_SET_POWER_STATE, parm);
+ update_power_state(codec, 0x25, parm);
/* Mono out */
/* SW4(28h)->MW1(29h)-> PW12 (2ah)*/
mono_out = 1;
}
parm = mono_out ? AC_PWRST_D0 : AC_PWRST_D3;
- snd_hda_codec_write(codec, 0x28, 0, AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0x29, 0, AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0x2a, 0, AC_VERB_SET_POWER_STATE, parm);
+ update_power_state(codec, 0x28, parm);
+ update_power_state(codec, 0x29, parm);
+ update_power_state(codec, 0x2a, parm);
/* PW 3/4 (1ch/1dh) */
parm = AC_PWRST_D3;
set_pin_power_state(codec, 0x1d, &parm);
/* HP Independent Mode, power on AOW3 */
if (spec->hp_independent_mode)
- snd_hda_codec_write(codec, 0x25, 0,
- AC_VERB_SET_POWER_STATE, parm);
+ update_power_state(codec, 0x25, parm);
/* force to D0 for internal Speaker */
/* MW0 (16h), AOW0 (10h) */
- snd_hda_codec_write(codec, 0x16, 0, AC_VERB_SET_POWER_STATE,
- imux_is_smixer ? AC_PWRST_D0 : parm);
- snd_hda_codec_write(codec, 0x10, 0, AC_VERB_SET_POWER_STATE,
- mono_out ? AC_PWRST_D0 : parm);
+ update_power_state(codec, 0x16, imux_is_smixer ? AC_PWRST_D0 : parm);
+ update_power_state(codec, 0x10, mono_out ? AC_PWRST_D0 : parm);
}
static int patch_vt1716S(struct hda_codec *codec)
set_pin_power_state(codec, 0x2b, &parm);
parm = AC_PWRST_D0;
/* MUX9/10 (1eh/1fh), AIW 0/1 (10h/11h) */
- snd_hda_codec_write(codec, 0x1e, 0, AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0x1f, 0, AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0x10, 0, AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0x11, 0, AC_VERB_SET_POWER_STATE, parm);
+ update_power_state(codec, 0x1e, parm);
+ update_power_state(codec, 0x1f, parm);
+ update_power_state(codec, 0x10, parm);
+ update_power_state(codec, 0x11, parm);
/* outputs */
/* AOW0 (8h)*/
- snd_hda_codec_write(codec, 0x8, 0, AC_VERB_SET_POWER_STATE, parm);
+ update_power_state(codec, 0x8, parm);
if (spec->codec_type == VT1802) {
/* PW4 (28h), MW4 (18h), MUX4(38h) */
parm = AC_PWRST_D3;
set_pin_power_state(codec, 0x28, &parm);
- snd_hda_codec_write(codec, 0x18, 0,
- AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0x38, 0,
- AC_VERB_SET_POWER_STATE, parm);
+ update_power_state(codec, 0x18, parm);
+ update_power_state(codec, 0x38, parm);
} else {
/* PW4 (26h), MW4 (1ch), MUX4(37h) */
parm = AC_PWRST_D3;
set_pin_power_state(codec, 0x26, &parm);
- snd_hda_codec_write(codec, 0x1c, 0,
- AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0x37, 0,
- AC_VERB_SET_POWER_STATE, parm);
+ update_power_state(codec, 0x1c, parm);
+ update_power_state(codec, 0x37, parm);
}
if (spec->codec_type == VT1802) {
/* PW1 (25h), MW1 (15h), MUX1(35h), AOW1 (9h) */
parm = AC_PWRST_D3;
set_pin_power_state(codec, 0x25, &parm);
- snd_hda_codec_write(codec, 0x15, 0,
- AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0x35, 0,
- AC_VERB_SET_POWER_STATE, parm);
+ update_power_state(codec, 0x15, parm);
+ update_power_state(codec, 0x35, parm);
} else {
/* PW1 (25h), MW1 (19h), MUX1(35h), AOW1 (9h) */
parm = AC_PWRST_D3;
set_pin_power_state(codec, 0x25, &parm);
- snd_hda_codec_write(codec, 0x19, 0,
- AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0x35, 0,
- AC_VERB_SET_POWER_STATE, parm);
+ update_power_state(codec, 0x19, parm);
+ update_power_state(codec, 0x35, parm);
}
if (spec->hp_independent_mode)
- snd_hda_codec_write(codec, 0x9, 0,
- AC_VERB_SET_POWER_STATE, AC_PWRST_D0);
+ update_power_state(codec, 0x9, AC_PWRST_D0);
/* Class-D */
/* PW0 (24h), MW0(18h/14h), MUX0(34h) */
set_pin_power_state(codec, 0x24, &parm);
parm = present ? AC_PWRST_D3 : AC_PWRST_D0;
if (spec->codec_type == VT1802)
- snd_hda_codec_write(codec, 0x14, 0,
- AC_VERB_SET_POWER_STATE, parm);
+ update_power_state(codec, 0x14, parm);
else
- snd_hda_codec_write(codec, 0x18, 0,
- AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0x34, 0, AC_VERB_SET_POWER_STATE, parm);
+ update_power_state(codec, 0x18, parm);
+ update_power_state(codec, 0x34, parm);
/* Mono Out */
present = snd_hda_jack_detect(codec, 0x26);
parm = present ? AC_PWRST_D3 : AC_PWRST_D0;
if (spec->codec_type == VT1802) {
/* PW15 (33h), MW8(1ch), MUX8(3ch) */
- snd_hda_codec_write(codec, 0x33, 0,
- AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0x1c, 0,
- AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0x3c, 0,
- AC_VERB_SET_POWER_STATE, parm);
+ update_power_state(codec, 0x33, parm);
+ update_power_state(codec, 0x1c, parm);
+ update_power_state(codec, 0x3c, parm);
} else {
/* PW15 (31h), MW8(17h), MUX8(3bh) */
- snd_hda_codec_write(codec, 0x31, 0,
- AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0x17, 0,
- AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0x3b, 0,
- AC_VERB_SET_POWER_STATE, parm);
+ update_power_state(codec, 0x31, parm);
+ update_power_state(codec, 0x17, parm);
+ update_power_state(codec, 0x3b, parm);
}
/* MW9 (21h) */
if (imux_is_smixer || !is_aa_path_mute(codec))
- snd_hda_codec_write(codec, 0x21, 0,
- AC_VERB_SET_POWER_STATE, AC_PWRST_D0);
+ update_power_state(codec, 0x21, AC_PWRST_D0);
else
- snd_hda_codec_write(codec, 0x21, 0,
- AC_VERB_SET_POWER_STATE, AC_PWRST_D3);
+ update_power_state(codec, 0x21, AC_PWRST_D3);
}
/* patch for vt2002P */
set_pin_power_state(codec, 0x2b, &parm);
parm = AC_PWRST_D0;
/* MUX10/11 (1eh/1fh), AIW 0/1 (10h/11h) */
- snd_hda_codec_write(codec, 0x1e, 0, AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0x1f, 0, AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0x10, 0, AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0x11, 0, AC_VERB_SET_POWER_STATE, parm);
+ update_power_state(codec, 0x1e, parm);
+ update_power_state(codec, 0x1f, parm);
+ update_power_state(codec, 0x10, parm);
+ update_power_state(codec, 0x11, parm);
/* outputs */
/* AOW0 (8h)*/
- snd_hda_codec_write(codec, 0x8, 0,
- AC_VERB_SET_POWER_STATE, AC_PWRST_D0);
+ update_power_state(codec, 0x8, AC_PWRST_D0);
/* PW4 (28h), MW4 (18h), MUX4(38h) */
parm = AC_PWRST_D3;
set_pin_power_state(codec, 0x28, &parm);
- snd_hda_codec_write(codec, 0x18, 0, AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0x38, 0, AC_VERB_SET_POWER_STATE, parm);
+ update_power_state(codec, 0x18, parm);
+ update_power_state(codec, 0x38, parm);
/* PW1 (25h), MW1 (15h), MUX1(35h), AOW1 (9h) */
parm = AC_PWRST_D3;
set_pin_power_state(codec, 0x25, &parm);
- snd_hda_codec_write(codec, 0x15, 0, AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0x35, 0, AC_VERB_SET_POWER_STATE, parm);
+ update_power_state(codec, 0x15, parm);
+ update_power_state(codec, 0x35, parm);
if (spec->hp_independent_mode)
- snd_hda_codec_write(codec, 0x9, 0,
- AC_VERB_SET_POWER_STATE, AC_PWRST_D0);
+ update_power_state(codec, 0x9, AC_PWRST_D0);
/* Internal Speaker */
/* PW0 (24h), MW0(14h), MUX0(34h) */
parm = AC_PWRST_D3;
set_pin_power_state(codec, 0x24, &parm);
if (present) {
- snd_hda_codec_write(codec, 0x14, 0,
- AC_VERB_SET_POWER_STATE, AC_PWRST_D3);
- snd_hda_codec_write(codec, 0x34, 0,
- AC_VERB_SET_POWER_STATE, AC_PWRST_D3);
+ update_power_state(codec, 0x14, AC_PWRST_D3);
+ update_power_state(codec, 0x34, AC_PWRST_D3);
} else {
- snd_hda_codec_write(codec, 0x14, 0,
- AC_VERB_SET_POWER_STATE, AC_PWRST_D0);
- snd_hda_codec_write(codec, 0x34, 0,
- AC_VERB_SET_POWER_STATE, AC_PWRST_D0);
+ update_power_state(codec, 0x14, AC_PWRST_D0);
+ update_power_state(codec, 0x34, AC_PWRST_D0);
}
parm = AC_PWRST_D3;
set_pin_power_state(codec, 0x31, &parm);
if (present) {
- snd_hda_codec_write(codec, 0x1c, 0,
- AC_VERB_SET_POWER_STATE, AC_PWRST_D3);
- snd_hda_codec_write(codec, 0x3c, 0,
- AC_VERB_SET_POWER_STATE, AC_PWRST_D3);
- snd_hda_codec_write(codec, 0x3e, 0,
- AC_VERB_SET_POWER_STATE, AC_PWRST_D3);
+ update_power_state(codec, 0x1c, AC_PWRST_D3);
+ update_power_state(codec, 0x3c, AC_PWRST_D3);
+ update_power_state(codec, 0x3e, AC_PWRST_D3);
} else {
- snd_hda_codec_write(codec, 0x1c, 0,
- AC_VERB_SET_POWER_STATE, AC_PWRST_D0);
- snd_hda_codec_write(codec, 0x3c, 0,
- AC_VERB_SET_POWER_STATE, AC_PWRST_D0);
- snd_hda_codec_write(codec, 0x3e, 0,
- AC_VERB_SET_POWER_STATE, AC_PWRST_D0);
+ update_power_state(codec, 0x1c, AC_PWRST_D0);
+ update_power_state(codec, 0x3c, AC_PWRST_D0);
+ update_power_state(codec, 0x3e, AC_PWRST_D0);
}
/* PW15 (33h), MW15 (1dh), MUX15(3dh) */
parm = AC_PWRST_D3;
set_pin_power_state(codec, 0x33, &parm);
- snd_hda_codec_write(codec, 0x1d, 0, AC_VERB_SET_POWER_STATE, parm);
- snd_hda_codec_write(codec, 0x3d, 0, AC_VERB_SET_POWER_STATE, parm);
+ update_power_state(codec, 0x1d, parm);
+ update_power_state(codec, 0x3d, parm);
}
mutex_lock(&chip->mutex);
reg = oxygen_read_ac97(chip, codec, index);
mutex_unlock(&chip->mutex);
- value->value.integer.value[0] = 31 - (reg & 0x1f);
- if (stereo)
- value->value.integer.value[1] = 31 - ((reg >> 8) & 0x1f);
+ if (!stereo) {
+ value->value.integer.value[0] = 31 - (reg & 0x1f);
+ } else {
+ value->value.integer.value[0] = 31 - ((reg >> 8) & 0x1f);
+ value->value.integer.value[1] = 31 - (reg & 0x1f);
+ }
return 0;
}
mutex_lock(&chip->mutex);
oldreg = oxygen_read_ac97(chip, codec, index);
- newreg = oldreg;
- newreg = (newreg & ~0x1f) |
- (31 - (value->value.integer.value[0] & 0x1f));
- if (stereo)
- newreg = (newreg & ~0x1f00) |
- ((31 - (value->value.integer.value[1] & 0x1f)) << 8);
- else
- newreg = (newreg & ~0x1f00) | ((newreg & 0x1f) << 8);
+ if (!stereo) {
+ newreg = oldreg & ~0x1f;
+ newreg |= 31 - (value->value.integer.value[0] & 0x1f);
+ } else {
+ newreg = oldreg & ~0x1f1f;
+ newreg |= (31 - (value->value.integer.value[0] & 0x1f)) << 8;
+ newreg |= 31 - (value->value.integer.value[1] & 0x1f);
+ }
change = newreg != oldreg;
if (change)
oxygen_write_ac97(chip, codec, index, newreg);
priv->config[id].mmcc &= 0xC0;
priv->config[id].mmcc |= cs42l73_mclk_coeffs[mclk_coeff].mmcc;
priv->config[id].spc &= 0xFC;
- priv->config[id].spc &= MCK_SCLK_64FS;
+ priv->config[id].spc |= MCK_SCLK_MCLK;
} else {
/* CS42L73 Slave */
priv->config[id].spc &= 0xFC;
case SND_SOC_BIAS_OFF:
regcache_cache_only(wm5100->regmap, true);
+ regcache_mark_dirty(wm5100->regmap);
if (wm5100->pdata.ldo_ena)
gpio_set_value_cansleep(wm5100->pdata.ldo_ena, 0);
regulator_bulk_disable(ARRAY_SIZE(wm5100->core_supplies),
if (wm5100->jack_detecting) {
dev_dbg(codec->dev, "Microphone detected\n");
wm5100->jack_mic = true;
+ wm5100->jack_detecting = false;
snd_soc_jack_report(wm5100->jack,
SND_JACK_HEADSET,
SND_JACK_HEADSET | SND_JACK_BTN_0);
SND_JACK_BTN_0);
} else if (wm5100->jack_detecting) {
dev_dbg(codec->dev, "Headphone detected\n");
+ wm5100->jack_detecting = false;
snd_soc_jack_report(wm5100->jack, SND_JACK_HEADPHONE,
SND_JACK_HEADPHONE);
.cache_type = REGCACHE_RBTREE,
};
+static const unsigned int wm5100_mic_ctrl_reg[] = {
+ WM5100_IN1L_CONTROL,
+ WM5100_IN2L_CONTROL,
+ WM5100_IN3L_CONTROL,
+ WM5100_IN4L_CONTROL,
+};
+
static __devinit int wm5100_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
}
for (i = 0; i < ARRAY_SIZE(wm5100->pdata.in_mode); i++) {
- regmap_update_bits(wm5100->regmap, WM5100_IN1L_CONTROL,
+ regmap_update_bits(wm5100->regmap, wm5100_mic_ctrl_reg[i],
WM5100_IN1_MODE_MASK |
WM5100_IN1_DMIC_SUP_MASK,
(wm5100->pdata.in_mode[i] <<
struct wm8962_priv *wm8962 = container_of(nb, struct wm8962_priv, \
disable_nb[n]); \
if (event & REGULATOR_EVENT_DISABLE) { \
- regcache_cache_only(wm8962->regmap, true); \
+ regcache_mark_dirty(wm8962->regmap); \
} \
return 0; \
}
case SNDRV_PCM_FORMAT_S16_LE:
break;
case SNDRV_PCM_FORMAT_S20_3LE:
- aif0 |= 0x40;
+ aif0 |= 0x4;
break;
case SNDRV_PCM_FORMAT_S24_LE:
- aif0 |= 0x80;
+ aif0 |= 0x8;
break;
case SNDRV_PCM_FORMAT_S32_LE:
- aif0 |= 0xc0;
+ aif0 |= 0xc;
break;
default:
return -EINVAL;
{
struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
+ pm_runtime_get_sync(codec->dev);
+
wm8994->vmid_refcount++;
dev_dbg(codec->dev, "Referencing VMID, refcount is now %d\n",
WM8994_VMID_RAMP_MASK,
WM8994_STARTUP_BIAS_ENA |
WM8994_VMID_BUF_ENA |
- (0x11 << WM8994_VMID_RAMP_SHIFT));
+ (0x3 << WM8994_VMID_RAMP_SHIFT));
+
+ /* Remove discharge for line out */
+ snd_soc_update_bits(codec, WM8994_ANTIPOP_1,
+ WM8994_LINEOUT1_DISCH |
+ WM8994_LINEOUT2_DISCH, 0);
/* Main bias enable, VMID=2x40k */
snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_1,
WM8994_VMID_BUF_ENA |
WM8994_VMID_RAMP_MASK, 0);
}
+
+ pm_runtime_put(codec->dev);
}
static int vmid_event(struct snd_soc_dapm_widget *w,
codec->cache_only = 0;
}
- /* Restore the registers */
- ret = snd_soc_cache_sync(codec);
- if (ret != 0)
- dev_err(codec->dev, "Failed to sync cache: %d\n", ret);
-
wm8994_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
for (i = 0; i < ARRAY_SIZE(wm8994->fll); i++) {
struct wm8996_priv *wm8996 = container_of(nb, struct wm8996_priv, \
disable_nb[n]); \
if (event & REGULATOR_EVENT_DISABLE) { \
- regcache_cache_only(wm8996->regmap, true); \
+ regcache_mark_dirty(wm8996->regmap); \
} \
return 0; \
}
};
static const struct snd_kcontrol_new line2_mix[] = {
-SOC_DAPM_SINGLE("IN2R Switch", WM8993_LINE_MIXER2, 2, 1, 0),
-SOC_DAPM_SINGLE("IN2L Switch", WM8993_LINE_MIXER2, 1, 1, 0),
+SOC_DAPM_SINGLE("IN1L Switch", WM8993_LINE_MIXER2, 2, 1, 0),
+SOC_DAPM_SINGLE("IN1R Switch", WM8993_LINE_MIXER2, 1, 1, 0),
SOC_DAPM_SINGLE("Output Switch", WM8993_LINE_MIXER2, 0, 1, 0),
};
static const struct snd_kcontrol_new line2n_mix[] = {
-SOC_DAPM_SINGLE("Left Output Switch", WM8993_LINE_MIXER2, 6, 1, 0),
-SOC_DAPM_SINGLE("Right Output Switch", WM8993_LINE_MIXER2, 5, 1, 0),
+SOC_DAPM_SINGLE("Left Output Switch", WM8993_LINE_MIXER2, 5, 1, 0),
+SOC_DAPM_SINGLE("Right Output Switch", WM8993_LINE_MIXER2, 6, 1, 0),
};
static const struct snd_kcontrol_new line2p_mix[] = {
SND_SOC_DAPM_SUPPLY("MICBIAS2", WM8993_POWER_MANAGEMENT_1, 5, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("MICBIAS1", WM8993_POWER_MANAGEMENT_1, 4, 0, NULL, 0),
+SND_SOC_DAPM_SUPPLY("LINEOUT_VMID_BUF", WM8993_ANTIPOP1, 7, 0, NULL, 0),
+
SND_SOC_DAPM_MIXER("IN1L PGA", WM8993_POWER_MANAGEMENT_2, 6, 0,
in1l_pga, ARRAY_SIZE(in1l_pga)),
SND_SOC_DAPM_MIXER("IN1R PGA", WM8993_POWER_MANAGEMENT_2, 4, 0,
};
static const struct snd_soc_dapm_route lineout1_se_routes[] = {
+ { "LINEOUT1N Mixer", NULL, "LINEOUT_VMID_BUF" },
{ "LINEOUT1N Mixer", "Left Output Switch", "Left Output PGA" },
{ "LINEOUT1N Mixer", "Right Output Switch", "Right Output PGA" },
+ { "LINEOUT1P Mixer", NULL, "LINEOUT_VMID_BUF" },
{ "LINEOUT1P Mixer", "Left Output Switch", "Left Output PGA" },
{ "LINEOUT1N Driver", NULL, "LINEOUT1N Mixer" },
};
static const struct snd_soc_dapm_route lineout2_diff_routes[] = {
- { "LINEOUT2 Mixer", "IN2L Switch", "IN2L PGA" },
- { "LINEOUT2 Mixer", "IN2R Switch", "IN2R PGA" },
+ { "LINEOUT2 Mixer", "IN1L Switch", "IN1L PGA" },
+ { "LINEOUT2 Mixer", "IN1R Switch", "IN1R PGA" },
{ "LINEOUT2 Mixer", "Output Switch", "Right Output PGA" },
{ "LINEOUT2N Driver", NULL, "LINEOUT2 Mixer" },
};
static const struct snd_soc_dapm_route lineout2_se_routes[] = {
+ { "LINEOUT2N Mixer", NULL, "LINEOUT_VMID_BUF" },
{ "LINEOUT2N Mixer", "Left Output Switch", "Left Output PGA" },
{ "LINEOUT2N Mixer", "Right Output Switch", "Right Output PGA" },
+ { "LINEOUT2P Mixer", NULL, "LINEOUT_VMID_BUF" },
{ "LINEOUT2P Mixer", "Right Output Switch", "Right Output PGA" },
{ "LINEOUT2N Driver", NULL, "LINEOUT2N Mixer" },
/* GTA02 specific routes and controls */
-#ifdef CONFIG_MACH_NEO1973_GTA02
-
static int gta02_speaker_enabled;
static int lm4853_set_spk(struct snd_kcontrol *kcontrol,
return 0;
}
-#else
-static int neo1973_gta02_wm8753_init(struct snd_soc_code *codec) { return 0; }
-#endif
-
static int neo1973_wm8753_init(struct snd_soc_pcm_runtime *rtd)
{
struct snd_soc_codec *codec = rtd->codec;
int ret;
/* set up NC codec pins */
- if (machine_is_neo1973_gta01()) {
- snd_soc_dapm_nc_pin(dapm, "LOUT2");
- snd_soc_dapm_nc_pin(dapm, "ROUT2");
- }
snd_soc_dapm_nc_pin(dapm, "OUT3");
snd_soc_dapm_nc_pin(dapm, "OUT4");
snd_soc_dapm_nc_pin(dapm, "LINE1");
return 0;
}
-/* GTA01 specific controls */
-
-#ifdef CONFIG_MACH_NEO1973_GTA01
-
-static const struct snd_soc_dapm_route neo1973_lm4857_routes[] = {
- {"Amp IN", NULL, "ROUT1"},
- {"Amp IN", NULL, "LOUT1"},
-
- {"Handset Spk", NULL, "Amp EP"},
- {"Stereo Out", NULL, "Amp LS"},
- {"Headphone", NULL, "Amp HP"},
-};
-
-static const struct snd_soc_dapm_widget neo1973_lm4857_dapm_widgets[] = {
- SND_SOC_DAPM_SPK("Handset Spk", NULL),
- SND_SOC_DAPM_SPK("Stereo Out", NULL),
- SND_SOC_DAPM_HP("Headphone", NULL),
-};
-
-static int neo1973_lm4857_init(struct snd_soc_dapm_context *dapm)
-{
- int ret;
-
- ret = snd_soc_dapm_new_controls(dapm, neo1973_lm4857_dapm_widgets,
- ARRAY_SIZE(neo1973_lm4857_dapm_widgets));
- if (ret)
- return ret;
-
- ret = snd_soc_dapm_add_routes(dapm, neo1973_lm4857_routes,
- ARRAY_SIZE(neo1973_lm4857_routes));
- if (ret)
- return ret;
-
- snd_soc_dapm_ignore_suspend(dapm, "Stereo Out");
- snd_soc_dapm_ignore_suspend(dapm, "Handset Spk");
- snd_soc_dapm_ignore_suspend(dapm, "Headphone");
-
- return 0;
-}
-
-#else
-static int neo1973_lm4857_init(struct snd_soc_dapm_context *dapm) { return 0; };
-#endif
-
static struct snd_soc_dai_link neo1973_dai[] = {
{ /* Hifi Playback - for similatious use with voice below */
.name = "WM8753",
.name = "dfbmcs320",
.codec_name = "dfbmcs320.0",
},
- {
- .name = "lm4857",
- .codec_name = "lm4857.0-007c",
- .init = neo1973_lm4857_init,
- },
};
static struct snd_soc_codec_conf neo1973_codec_conf[] = {
},
};
-#ifdef CONFIG_MACH_NEO1973_GTA02
static const struct gpio neo1973_gta02_gpios[] = {
{ GTA02_GPIO_HP_IN, GPIOF_OUT_INIT_HIGH, "GTA02_HP_IN" },
{ GTA02_GPIO_AMP_SHUT, GPIOF_OUT_INIT_HIGH, "GTA02_AMP_SHUT" },
};
-#else
-static const struct gpio neo1973_gta02_gpios[] = {};
-#endif
static struct snd_soc_card neo1973 = {
.name = "neo1973",
{
int ret;
- if (!machine_is_neo1973_gta01() && !machine_is_neo1973_gta02())
+ if (!machine_is_neo1973_gta02())
return -ENODEV;
if (machine_is_neo1973_gta02()) {
if (!codec->suspended && codec->driver->suspend) {
switch (codec->dapm.bias_level) {
case SND_SOC_BIAS_STANDBY:
+ /*
+ * If the CODEC is capable of idle
+ * bias off then being in STANDBY
+ * means it's doing something,
+ * otherwise fall through.
+ */
+ if (codec->dapm.idle_bias_off) {
+ dev_dbg(codec->dev,
+ "idle_bias_off CODEC on over suspend\n");
+ break;
+ }
case SND_SOC_BIAS_OFF:
codec->driver->suspend(codec);
codec->suspended = 1;
}
}
},
+{
+ /* Edirol UM-3G */
+ USB_DEVICE_VENDOR_SPEC(0x0582, 0x0108),
+ .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+ .ifnum = 0,
+ .type = QUIRK_MIDI_STANDARD_INTERFACE
+ }
+},
{
/* Boss JS-8 Jam Station */
USB_DEVICE(0x0582, 0x0109),
CFLAGS = -fno-omit-frame-pointer -ggdb3 -Wall -Wextra -std=gnu99 $(CFLAGS_WERROR) $(CFLAGS_OPTIMIZE) -D_FORTIFY_SOURCE=2 $(EXTRA_WARNINGS) $(EXTRA_CFLAGS)
EXTLIBS = -lpthread -lrt -lelf -lm
-ALL_CFLAGS = $(CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
+ALL_CFLAGS = $(CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE
ALL_LDFLAGS = $(LDFLAGS)
STRIP ?= strip
### --- END CONFIGURATION SECTION ---
-# Those must not be GNU-specific; they are shared with perl/ which may
-# be built by a different compiler. (Note that this is an artifact now
-# but it still might be nice to keep that distinction.)
-BASIC_CFLAGS = -Iutil/include -Iarch/$(ARCH)/include
+BASIC_CFLAGS = -Iutil/include -Iarch/$(ARCH)/include -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE
BASIC_LDFLAGS =
# Guard against environment variables
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
*/
-#define _GNU_SOURCE
#include <sys/utsname.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <stdlib.h>
#include <string.h>
-#undef _GNU_SOURCE
#include "perf.h"
#include "builtin.h"
#include "util/util.h"
static void perf_top__update_print_entries(struct perf_top *top)
{
- top->print_entries = top->winsize.ws_row;
-
if (top->print_entries > 9)
top->print_entries -= 9;
}
struct perf_top *top = arg;
get_term_dimensions(&top->winsize);
+ if (!top->print_entries
+ || (top->print_entries+4) > top->winsize.ws_row) {
+ top->print_entries = top->winsize.ws_row;
+ } else {
+ top->print_entries += 4;
+ top->winsize.ws_row = top->print_entries;
+ }
perf_top__update_print_entries(top);
}
};
perf_top__sig_winch(SIGWINCH, NULL, top);
sigaction(SIGWINCH, &act, NULL);
- } else
+ } else {
+ perf_top__sig_winch(SIGWINCH, NULL, top);
signal(SIGWINCH, SIG_DFL);
+ }
break;
case 'E':
if (top->evlist->nr_entries > 1) {
strncpy(ev.event_type.event_type.name, name, MAX_EVENT_NAME - 1);
ev.event_type.header.type = PERF_RECORD_HEADER_EVENT_TYPE;
- size = strlen(name);
+ size = strlen(ev.event_type.event_type.name);
size = ALIGN(size, sizeof(u64));
ev.event_type.header.size = sizeof(ev.event_type) -
(sizeof(ev.event_type.event_type.name) - size);
*
*/
-#define _GNU_SOURCE
#include <sys/utsname.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <limits.h>
#include <elf.h>
-#undef _GNU_SOURCE
#include "util.h"
#include "event.h"
#include "string.h"
-#define _GNU_SOURCE
#include <ctype.h>
#include <dirent.h>
#include <errno.h>
* The parts for function graph printing was taken and modified from the
* Linux Kernel that were written by Frederic Weisbecker.
*/
-#define _GNU_SOURCE
+
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <ctype.h>
#include <errno.h>
-#undef _GNU_SOURCE
#include "../perf.h"
#include "util.h"
#include "trace-event.h"
-#define _GNU_SOURCE
#include <stdio.h>
-#undef _GNU_SOURCE
#include "../libslang.h"
#include <stdlib.h>
#include <string.h>
-#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#define decimal_length(x) ((int)(sizeof(x) * 2.56 + 0.5) + 1)
#define _ALL_SOURCE 1
-#define _GNU_SOURCE 1
#define _BSD_SOURCE 1
#define HAS_BOOL
if (memslot && memslot->dirty_bitmap) {
unsigned long rel_gfn = gfn - memslot->base_gfn;
- if (!__test_and_set_bit_le(rel_gfn, memslot->dirty_bitmap))
+ if (!test_and_set_bit_le(rel_gfn, memslot->dirty_bitmap))
memslot->nr_dirty_pages++;
}
}
projects / mv-sheeva.git / commitdiff