#define NUM_TARGET_CE_CONFIG_WLAN ar->hw_values->num_target_ce_config_wlan
+/* Target specific defines for 10.4 firmware */
+#define TARGET_10_4_NUM_VDEVS 16
+#define TARGET_10_4_NUM_STATIONS 32
+#define TARGET_10_4_NUM_PEERS ((TARGET_10_4_NUM_STATIONS) + \
+ (TARGET_10_4_NUM_VDEVS))
+#define TARGET_10_4_ACTIVE_PEERS 0
+#define TARGET_10_4_NUM_OFFLOAD_PEERS 0
+#define TARGET_10_4_NUM_OFFLOAD_REORDER_BUFFS 0
+#define TARGET_10_4_NUM_PEER_KEYS 2
+#define TARGET_10_4_TGT_NUM_TIDS ((TARGET_10_4_NUM_PEERS) * 2)
+#define TARGET_10_4_AST_SKID_LIMIT 32
+#define TARGET_10_4_TX_CHAIN_MASK (BIT(0) | BIT(1) | \
+ BIT(2) | BIT(3))
+#define TARGET_10_4_RX_CHAIN_MASK (BIT(0) | BIT(1) | \
+ BIT(2) | BIT(3))
+
+/* 100 ms for video, best-effort, and background */
+#define TARGET_10_4_RX_TIMEOUT_LO_PRI 100
+
+/* 40 ms for voice */
+#define TARGET_10_4_RX_TIMEOUT_HI_PRI 40
+
+#define TARGET_10_4_RX_DECAP_MODE ATH10K_HW_TXRX_NATIVE_WIFI
+#define TARGET_10_4_SCAN_MAX_REQS 4
+#define TARGET_10_4_BMISS_OFFLOAD_MAX_VDEV 3
+#define TARGET_10_4_ROAM_OFFLOAD_MAX_VDEV 3
+#define TARGET_10_4_ROAM_OFFLOAD_MAX_PROFILES 8
+
+/* Note: mcast to ucast is disabled by default */
+#define TARGET_10_4_NUM_MCAST_GROUPS 0
+#define TARGET_10_4_NUM_MCAST_TABLE_ELEMS 0
+#define TARGET_10_4_MCAST2UCAST_MODE 0
+
+#define TARGET_10_4_TX_DBG_LOG_SIZE 1024
+#define TARGET_10_4_NUM_WDS_ENTRIES 32
+#define TARGET_10_4_DMA_BURST_SIZE 1
+#define TARGET_10_4_MAC_AGGR_DELIM 0
+#define TARGET_10_4_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK 1
+#define TARGET_10_4_VOW_CONFIG 0
+#define TARGET_10_4_GTK_OFFLOAD_MAX_VDEV 3
+#define TARGET_10_4_NUM_MSDU_DESC (1024 + 400)
+#define TARGET_10_4_11AC_TX_MAX_FRAGS 2
+#define TARGET_10_4_MAX_PEER_EXT_STATS 16
+#define TARGET_10_4_SMART_ANT_CAP 0
+#define TARGET_10_4_BK_MIN_FREE 0
+#define TARGET_10_4_BE_MIN_FREE 0
+#define TARGET_10_4_VI_MIN_FREE 0
+#define TARGET_10_4_VO_MIN_FREE 0
+#define TARGET_10_4_RX_BATCH_MODE 1
+#define TARGET_10_4_THERMAL_THROTTLING_CONFIG 0
+#define TARGET_10_4_ATF_CONFIG 0
+#define TARGET_10_4_IPHDR_PAD_CONFIG 1
+#define TARGET_10_4_QWRAP_CONFIG 0
+
/* Number of Copy Engines supported */
#define CE_COUNT ar->hw_values->ce_count
return buf;
}
+static struct sk_buff *ath10k_wmi_10_4_op_gen_init(struct ath10k *ar)
+{
+ struct wmi_init_cmd_10_4 *cmd;
+ struct sk_buff *buf;
+ struct wmi_resource_config_10_4 config = {};
+ u32 len;
+
+ config.num_vdevs = __cpu_to_le32(ar->max_num_vdevs);
+ config.num_peers = __cpu_to_le32(ar->max_num_peers);
+ config.num_active_peers = __cpu_to_le32(ar->num_active_peers);
+ config.num_tids = __cpu_to_le32(ar->num_tids);
+
+ config.num_offload_peers = __cpu_to_le32(TARGET_10_4_NUM_OFFLOAD_PEERS);
+ config.num_offload_reorder_buffs =
+ __cpu_to_le32(TARGET_10_4_NUM_OFFLOAD_REORDER_BUFFS);
+ config.num_peer_keys = __cpu_to_le32(TARGET_10_4_NUM_PEER_KEYS);
+ config.ast_skid_limit = __cpu_to_le32(TARGET_10_4_AST_SKID_LIMIT);
+ config.tx_chain_mask = __cpu_to_le32(TARGET_10_4_TX_CHAIN_MASK);
+ config.rx_chain_mask = __cpu_to_le32(TARGET_10_4_RX_CHAIN_MASK);
+
+ config.rx_timeout_pri[0] = __cpu_to_le32(TARGET_10_4_RX_TIMEOUT_LO_PRI);
+ config.rx_timeout_pri[1] = __cpu_to_le32(TARGET_10_4_RX_TIMEOUT_LO_PRI);
+ config.rx_timeout_pri[2] = __cpu_to_le32(TARGET_10_4_RX_TIMEOUT_LO_PRI);
+ config.rx_timeout_pri[3] = __cpu_to_le32(TARGET_10_4_RX_TIMEOUT_HI_PRI);
+
+ config.rx_decap_mode = __cpu_to_le32(TARGET_10_4_RX_DECAP_MODE);
+ config.scan_max_pending_req = __cpu_to_le32(TARGET_10_4_SCAN_MAX_REQS);
+ config.bmiss_offload_max_vdev =
+ __cpu_to_le32(TARGET_10_4_BMISS_OFFLOAD_MAX_VDEV);
+ config.roam_offload_max_vdev =
+ __cpu_to_le32(TARGET_10_4_ROAM_OFFLOAD_MAX_VDEV);
+ config.roam_offload_max_ap_profiles =
+ __cpu_to_le32(TARGET_10_4_ROAM_OFFLOAD_MAX_PROFILES);
+ config.num_mcast_groups = __cpu_to_le32(TARGET_10_4_NUM_MCAST_GROUPS);
+ config.num_mcast_table_elems =
+ __cpu_to_le32(TARGET_10_4_NUM_MCAST_TABLE_ELEMS);
+
+ config.mcast2ucast_mode = __cpu_to_le32(TARGET_10_4_MCAST2UCAST_MODE);
+ config.tx_dbg_log_size = __cpu_to_le32(TARGET_10_4_TX_DBG_LOG_SIZE);
+ config.num_wds_entries = __cpu_to_le32(TARGET_10_4_NUM_WDS_ENTRIES);
+ config.dma_burst_size = __cpu_to_le32(TARGET_10_4_DMA_BURST_SIZE);
+ config.mac_aggr_delim = __cpu_to_le32(TARGET_10_4_MAC_AGGR_DELIM);
+
+ config.rx_skip_defrag_timeout_dup_detection_check =
+ __cpu_to_le32(TARGET_10_4_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK);
+
+ config.vow_config = __cpu_to_le32(TARGET_10_4_VOW_CONFIG);
+ config.gtk_offload_max_vdev =
+ __cpu_to_le32(TARGET_10_4_GTK_OFFLOAD_MAX_VDEV);
+ config.num_msdu_desc = __cpu_to_le32(TARGET_10_4_NUM_MSDU_DESC);
+ config.max_frag_entries = __cpu_to_le32(TARGET_10_4_11AC_TX_MAX_FRAGS);
+ config.max_peer_ext_stats =
+ __cpu_to_le32(TARGET_10_4_MAX_PEER_EXT_STATS);
+ config.smart_ant_cap = __cpu_to_le32(TARGET_10_4_SMART_ANT_CAP);
+
+ config.bk_minfree = __cpu_to_le32(TARGET_10_4_BK_MIN_FREE);
+ config.be_minfree = __cpu_to_le32(TARGET_10_4_BE_MIN_FREE);
+ config.vi_minfree = __cpu_to_le32(TARGET_10_4_VI_MIN_FREE);
+ config.vo_minfree = __cpu_to_le32(TARGET_10_4_VO_MIN_FREE);
+
+ config.rx_batchmode = __cpu_to_le32(TARGET_10_4_RX_BATCH_MODE);
+ config.tt_support =
+ __cpu_to_le32(TARGET_10_4_THERMAL_THROTTLING_CONFIG);
+ config.atf_config = __cpu_to_le32(TARGET_10_4_ATF_CONFIG);
+ config.iphdr_pad_config = __cpu_to_le32(TARGET_10_4_IPHDR_PAD_CONFIG);
+ config.qwrap_config = __cpu_to_le32(TARGET_10_4_QWRAP_CONFIG);
+
+ len = sizeof(*cmd) +
+ (sizeof(struct host_memory_chunk) * ar->wmi.num_mem_chunks);
+
+ buf = ath10k_wmi_alloc_skb(ar, len);
+ if (!buf)
+ return ERR_PTR(-ENOMEM);
+
+ cmd = (struct wmi_init_cmd_10_4 *)buf->data;
+ memcpy(&cmd->resource_config, &config, sizeof(config));
+ ath10k_wmi_put_host_mem_chunks(ar, &cmd->mem_chunks);
+
+ ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi init 10.4\n");
+ return buf;
+}
+
int ath10k_wmi_start_scan_verify(const struct wmi_start_scan_arg *arg)
{
if (arg->ie_len && !arg->ie)
static const struct wmi_ops wmi_10_4_ops = {
.map_svc = wmi_10_4_svc_map,
+ .gen_init = ath10k_wmi_10_4_op_gen_init,
};
int ath10k_wmi_attach(struct ath10k *ar)
#define NUM_UNITS_IS_NUM_VDEVS 0x1
#define NUM_UNITS_IS_NUM_PEERS 0x2
+struct wmi_resource_config_10_4 {
+ /* Number of virtual devices (VAPs) to support */
+ __le32 num_vdevs;
+
+ /* Number of peer nodes to support */
+ __le32 num_peers;
+
+ /* Number of active peer nodes to support */
+ __le32 num_active_peers;
+
+ /* In offload mode, target supports features like WOW, chatter and other
+ * protocol offloads. In order to support them some functionalities like
+ * reorder buffering, PN checking need to be done in target.
+ * This determines maximum number of peers supported by target in
+ * offload mode.
+ */
+ __le32 num_offload_peers;
+
+ /* Number of reorder buffers available for doing target based reorder
+ * Rx reorder buffering
+ */
+ __le32 num_offload_reorder_buffs;
+
+ /* Number of keys per peer */
+ __le32 num_peer_keys;
+
+ /* Total number of TX/RX data TIDs */
+ __le32 num_tids;
+
+ /* Max skid for resolving hash collisions.
+ * The address search table is sparse, so that if two MAC addresses
+ * result in the same hash value, the second of these conflicting
+ * entries can slide to the next index in the address search table,
+ * and use it, if it is unoccupied. This ast_skid_limit parameter
+ * specifies the upper bound on how many subsequent indices to search
+ * over to find an unoccupied space.
+ */
+ __le32 ast_skid_limit;
+
+ /* The nominal chain mask for transmit.
+ * The chain mask may be modified dynamically, e.g. to operate AP tx
+ * with a reduced number of chains if no clients are associated.
+ * This configuration parameter specifies the nominal chain-mask that
+ * should be used when not operating with a reduced set of tx chains.
+ */
+ __le32 tx_chain_mask;
+
+ /* The nominal chain mask for receive.
+ * The chain mask may be modified dynamically, e.g. for a client to use
+ * a reduced number of chains for receive if the traffic to the client
+ * is low enough that it doesn't require downlink MIMO or antenna
+ * diversity. This configuration parameter specifies the nominal
+ * chain-mask that should be used when not operating with a reduced
+ * set of rx chains.
+ */
+ __le32 rx_chain_mask;
+
+ /* What rx reorder timeout (ms) to use for the AC.
+ * Each WMM access class (voice, video, best-effort, background) will
+ * have its own timeout value to dictate how long to wait for missing
+ * rx MPDUs to arrive before flushing subsequent MPDUs that have already
+ * been received. This parameter specifies the timeout in milliseconds
+ * for each class.
+ */
+ __le32 rx_timeout_pri[4];
+
+ /* What mode the rx should decap packets to.
+ * MAC can decap to RAW (no decap), native wifi or Ethernet types.
+ * This setting also determines the default TX behavior, however TX
+ * behavior can be modified on a per VAP basis during VAP init
+ */
+ __le32 rx_decap_mode;
+
+ __le32 scan_max_pending_req;
+
+ __le32 bmiss_offload_max_vdev;
+
+ __le32 roam_offload_max_vdev;
+
+ __le32 roam_offload_max_ap_profiles;
+
+ /* How many groups to use for mcast->ucast conversion.
+ * The target's WAL maintains a table to hold information regarding
+ * which peers belong to a given multicast group, so that if
+ * multicast->unicast conversion is enabled, the target can convert
+ * multicast tx frames to a series of unicast tx frames, to each peer
+ * within the multicast group. This num_mcast_groups configuration
+ * parameter tells the target how many multicast groups to provide
+ * storage for within its multicast group membership table.
+ */
+ __le32 num_mcast_groups;
+
+ /* Size to alloc for the mcast membership table.
+ * This num_mcast_table_elems configuration parameter tells the target
+ * how many peer elements it needs to provide storage for in its
+ * multicast group membership table. These multicast group membership
+ * table elements are shared by the multicast groups stored within
+ * the table.
+ */
+ __le32 num_mcast_table_elems;
+
+ /* Whether/how to do multicast->unicast conversion.
+ * This configuration parameter specifies whether the target should
+ * perform multicast --> unicast conversion on transmit, and if so,
+ * what to do if it finds no entries in its multicast group membership
+ * table for the multicast IP address in the tx frame.
+ * Configuration value:
+ * 0 -> Do not perform multicast to unicast conversion.
+ * 1 -> Convert multicast frames to unicast, if the IP multicast address
+ * from the tx frame is found in the multicast group membership
+ * table. If the IP multicast address is not found, drop the frame
+ * 2 -> Convert multicast frames to unicast, if the IP multicast address
+ * from the tx frame is found in the multicast group membership
+ * table. If the IP multicast address is not found, transmit the
+ * frame as multicast.
+ */
+ __le32 mcast2ucast_mode;
+
+ /* How much memory to allocate for a tx PPDU dbg log.
+ * This parameter controls how much memory the target will allocate to
+ * store a log of tx PPDU meta-information (how large the PPDU was,
+ * when it was sent, whether it was successful, etc.)
+ */
+ __le32 tx_dbg_log_size;
+
+ /* How many AST entries to be allocated for WDS */
+ __le32 num_wds_entries;
+
+ /* MAC DMA burst size. 0 -default, 1 -256B */
+ __le32 dma_burst_size;
+
+ /* Fixed delimiters to be inserted after every MPDU to account for
+ * interface latency to avoid underrun.
+ */
+ __le32 mac_aggr_delim;
+
+ /* Determine whether target is responsible for detecting duplicate
+ * non-aggregate MPDU and timing out stale fragments. A-MPDU reordering
+ * is always performed on the target.
+ *
+ * 0: target responsible for frag timeout and dup checking
+ * 1: host responsible for frag timeout and dup checking
+ */
+ __le32 rx_skip_defrag_timeout_dup_detection_check;
+
+ /* Configuration for VoW : No of Video nodes to be supported and max
+ * no of descriptors for each video link (node).
+ */
+ __le32 vow_config;
+
+ /* Maximum vdev that could use gtk offload */
+ __le32 gtk_offload_max_vdev;
+
+ /* Number of msdu descriptors target should use */
+ __le32 num_msdu_desc;
+
+ /* Max number of tx fragments per MSDU.
+ * This parameter controls the max number of tx fragments per MSDU.
+ * This will passed by target as part of the WMI_SERVICE_READY event
+ * and is overridden by the OS shim as required.
+ */
+ __le32 max_frag_entries;
+
+ /* Max number of extended peer stats.
+ * This parameter controls the max number of peers for which extended
+ * statistics are supported by target
+ */
+ __le32 max_peer_ext_stats;
+
+ /* Smart antenna capabilities information.
+ * 1 - Smart antenna is enabled
+ * 0 - Smart antenna is disabled
+ * In future this can contain smart antenna specific capabilities.
+ */
+ __le32 smart_ant_cap;
+
+ /* User can configure the buffers allocated for each AC (BE, BK, VI, VO)
+ * during init.
+ */
+ __le32 bk_minfree;
+ __le32 be_minfree;
+ __le32 vi_minfree;
+ __le32 vo_minfree;
+
+ /* Rx batch mode capability.
+ * 1 - Rx batch mode enabled
+ * 0 - Rx batch mode disabled
+ */
+ __le32 rx_batchmode;
+
+ /* Thermal throttling capability.
+ * 1 - Capable of thermal throttling
+ * 0 - Not capable of thermal throttling
+ */
+ __le32 tt_support;
+
+ /* ATF configuration.
+ * 1 - Enable ATF
+ * 0 - Disable ATF
+ */
+ __le32 atf_config;
+
+ /* Configure padding to manage IP header un-alignment
+ * 1 - Enable padding
+ * 0 - Disable padding
+ */
+ __le32 iphdr_pad_config;
+
+ /* qwrap configuration
+ * 1 - This is qwrap configuration
+ * 0 - This is not qwrap
+ */
+ __le32 qwrap_config;
+} __packed;
+
/* strucutre describing host memory chunk. */
struct host_memory_chunk {
/* id of the request that is passed up in service ready */
struct wmi_host_mem_chunks mem_chunks;
} __packed;
+struct wmi_init_cmd_10_4 {
+ struct wmi_resource_config_10_4 resource_config;
+ struct wmi_host_mem_chunks mem_chunks;
+} __packed;
+
struct wmi_chan_list_entry {
__le16 freq;
u8 phy_mode; /* valid for 10.2 only */
projects / linux-beck.git / commitdiff