{
struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu);
struct acpi_processor_performance *perf;
- struct cpufreq_freqs freqs;
struct drv_cmd cmd;
unsigned int next_perf_state = 0; /* Index into perf table */
int result = 0;
- pr_debug("acpi_cpufreq_target %d (%d)\n",
- data->freq_table[index].frequency, policy->cpu);
-
if (unlikely(data == NULL ||
data->acpi_data == NULL || data->freq_table == NULL)) {
return -ENODEV;
else
cmd.mask = cpumask_of(policy->cpu);
- freqs.old = perf->states[perf->state].core_frequency * 1000;
- freqs.new = data->freq_table[index].frequency;
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
drv_write(&cmd);
if (acpi_pstate_strict) {
- if (!check_freqs(cmd.mask, freqs.new, data)) {
+ if (!check_freqs(cmd.mask, data->freq_table[index].frequency,
+ data)) {
pr_debug("acpi_cpufreq_target failed (%d)\n",
policy->cpu);
result = -EAGAIN;
- freqs.new = freqs.old;
}
}
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
if (!result)
perf->state = next_perf_state;
static int bL_cpufreq_set_target(struct cpufreq_policy *policy,
unsigned int index)
{
- struct cpufreq_freqs freqs;
u32 cpu = policy->cpu, cur_cluster, new_cluster, actual_cluster;
- int ret = 0;
+ unsigned int freqs_new;
cur_cluster = cpu_to_cluster(cpu);
new_cluster = actual_cluster = per_cpu(physical_cluster, cpu);
- freqs.old = bL_cpufreq_get_rate(cpu);
- freqs.new = freq_table[cur_cluster][index].frequency;
-
- pr_debug("%s: cpu: %d, cluster: %d, oldfreq: %d, target freq: %d, new freq: %d\n",
- __func__, cpu, cur_cluster, freqs.old, freqs.new,
- freqs.new);
+ freqs_new = freq_table[cur_cluster][index].frequency;
if (is_bL_switching_enabled()) {
if ((actual_cluster == A15_CLUSTER) &&
- (freqs.new < clk_big_min)) {
+ (freqs_new < clk_big_min)) {
new_cluster = A7_CLUSTER;
} else if ((actual_cluster == A7_CLUSTER) &&
- (freqs.new > clk_little_max)) {
+ (freqs_new > clk_little_max)) {
new_cluster = A15_CLUSTER;
}
}
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
- ret = bL_cpufreq_set_rate(cpu, actual_cluster, new_cluster, freqs.new);
- if (ret)
- freqs.new = freqs.old;
-
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
- return ret;
+ return bL_cpufreq_set_rate(cpu, actual_cluster, new_cluster, freqs_new);
}
static inline u32 get_table_count(struct cpufreq_frequency_table *table)
static int at32_set_target(struct cpufreq_policy *policy, unsigned int index)
{
- struct cpufreq_freqs freqs;
+ unsigned int old_freq, new_freq;
- freqs.old = at32_get_speed(0);
- freqs.new = freq_table[index].frequency;
+ old_freq = at32_get_speed(0);
+ new_freq = freq_table[index].frequency;
if (!ref_freq) {
- ref_freq = freqs.old;
+ ref_freq = old_freq;
loops_per_jiffy_ref = boot_cpu_data.loops_per_jiffy;
}
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
- if (freqs.old < freqs.new)
+ if (old_freq < new_freq)
boot_cpu_data.loops_per_jiffy = cpufreq_scale(
- loops_per_jiffy_ref, ref_freq, freqs.new);
- clk_set_rate(cpuclk, freqs.new * 1000);
- if (freqs.new < freqs.old)
+ loops_per_jiffy_ref, ref_freq, new_freq);
+ clk_set_rate(cpuclk, new_freq * 1000);
+ if (new_freq < old_freq)
boot_cpu_data.loops_per_jiffy = cpufreq_scale(
- loops_per_jiffy_ref, ref_freq, freqs.new);
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
- pr_debug("cpufreq: set frequency %u Hz\n", freqs.new * 1000);
+ loops_per_jiffy_ref, ref_freq, new_freq);
return 0;
}
#ifndef CONFIG_BF60x
unsigned int plldiv;
#endif
- struct cpufreq_freqs freqs;
static unsigned long lpj_ref;
static unsigned int lpj_ref_freq;
+ unsigned int old_freq, new_freq;
int ret = 0;
#if defined(CONFIG_CYCLES_CLOCKSOURCE)
cycles_t cycles;
#endif
- freqs.old = bfin_getfreq_khz(0);
- freqs.new = bfin_freq_table[index].frequency;
+ old_freq = bfin_getfreq_khz(0);
+ new_freq = bfin_freq_table[index].frequency;
- pr_debug("cpufreq: changing cclk to %lu; target = %u, oldfreq = %u\n",
- freqs.new, freqs.new, freqs.old);
-
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
#ifndef CONFIG_BF60x
plldiv = (bfin_read_PLL_DIV() & SSEL) | dpm_state_table[index].csel;
bfin_write_PLL_DIV(plldiv);
#else
- ret = cpu_set_cclk(policy->cpu, freqs.new * 1000);
+ ret = cpu_set_cclk(policy->cpu, new_freq * 1000);
if (ret != 0) {
WARN_ONCE(ret, "cpufreq set freq failed %d\n", ret);
return ret;
#endif
if (!lpj_ref_freq) {
lpj_ref = loops_per_jiffy;
- lpj_ref_freq = freqs.old;
+ lpj_ref_freq = old_freq;
}
- if (freqs.new != freqs.old) {
+ if (new_freq != old_freq) {
loops_per_jiffy = cpufreq_scale(lpj_ref,
- lpj_ref_freq, freqs.new);
+ lpj_ref_freq, new_freq);
}
- /* TODO: just test case for cycles clock source, remove later */
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
- pr_debug("cpufreq: done\n");
return ret;
}
static int cpu0_set_target(struct cpufreq_policy *policy, unsigned int index)
{
- struct cpufreq_freqs freqs;
struct dev_pm_opp *opp;
unsigned long volt = 0, volt_old = 0, tol = 0;
+ unsigned int old_freq, new_freq;
long freq_Hz, freq_exact;
int ret;
freq_Hz = clk_round_rate(cpu_clk, freq_table[index].frequency * 1000);
if (freq_Hz < 0)
freq_Hz = freq_table[index].frequency * 1000;
- freq_exact = freq_Hz;
- freqs.new = freq_Hz / 1000;
- freqs.old = clk_get_rate(cpu_clk) / 1000;
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
+ freq_exact = freq_Hz;
+ new_freq = freq_Hz / 1000;
+ old_freq = clk_get_rate(cpu_clk) / 1000;
if (!IS_ERR(cpu_reg)) {
rcu_read_lock();
if (IS_ERR(opp)) {
rcu_read_unlock();
pr_err("failed to find OPP for %ld\n", freq_Hz);
- freqs.new = freqs.old;
- ret = PTR_ERR(opp);
- goto post_notify;
+ return PTR_ERR(opp);
}
volt = dev_pm_opp_get_voltage(opp);
rcu_read_unlock();
}
pr_debug("%u MHz, %ld mV --> %u MHz, %ld mV\n",
- freqs.old / 1000, volt_old ? volt_old / 1000 : -1,
- freqs.new / 1000, volt ? volt / 1000 : -1);
+ old_freq / 1000, volt_old ? volt_old / 1000 : -1,
+ new_freq / 1000, volt ? volt / 1000 : -1);
/* scaling up? scale voltage before frequency */
- if (!IS_ERR(cpu_reg) && freqs.new > freqs.old) {
+ if (!IS_ERR(cpu_reg) && new_freq > old_freq) {
ret = regulator_set_voltage_tol(cpu_reg, volt, tol);
if (ret) {
pr_err("failed to scale voltage up: %d\n", ret);
- freqs.new = freqs.old;
- goto post_notify;
+ return ret;
}
}
pr_err("failed to set clock rate: %d\n", ret);
if (!IS_ERR(cpu_reg))
regulator_set_voltage_tol(cpu_reg, volt_old, tol);
- freqs.new = freqs.old;
- goto post_notify;
+ return ret;
}
/* scaling down? scale voltage after frequency */
- if (!IS_ERR(cpu_reg) && freqs.new < freqs.old) {
+ if (!IS_ERR(cpu_reg) && new_freq < old_freq) {
ret = regulator_set_voltage_tol(cpu_reg, volt, tol);
if (ret) {
pr_err("failed to scale voltage down: %d\n", ret);
- clk_set_rate(cpu_clk, freqs.old * 1000);
- freqs.new = freqs.old;
+ clk_set_rate(cpu_clk, old_freq * 1000);
}
}
-post_notify:
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
return ret;
}
retval = cpufreq_driver->target(policy, target_freq, relation);
else if (cpufreq_driver->target_index) {
struct cpufreq_frequency_table *freq_table;
+ struct cpufreq_freqs freqs;
+ bool notify;
int index;
freq_table = cpufreq_frequency_get_table(policy->cpu);
goto out;
}
- if (freq_table[index].frequency == policy->cur)
+ if (freq_table[index].frequency == policy->cur) {
retval = 0;
- else
- retval = cpufreq_driver->target_index(policy, index);
+ goto out;
+ }
+
+ notify = !(cpufreq_driver->flags & CPUFREQ_ASYNC_NOTIFICATION);
+
+ if (notify) {
+ freqs.old = policy->cur;
+ freqs.new = freq_table[index].frequency;
+ freqs.flags = 0;
+
+ pr_debug("%s: cpu: %d, oldfreq: %u, new freq: %u\n",
+ __func__, policy->cpu, freqs.old,
+ freqs.new);
+
+ cpufreq_notify_transition(policy, &freqs,
+ CPUFREQ_PRECHANGE);
+ }
+
+ retval = cpufreq_driver->target_index(policy, index);
+ if (retval)
+ pr_err("%s: Failed to change cpu frequency: %d\n",
+ __func__, retval);
+
+ if (notify) {
+ /*
+ * Notify with old freq in case we failed to change
+ * frequency
+ */
+ if (retval)
+ freqs.new = freqs.old;
+
+ cpufreq_notify_transition(policy, &freqs,
+ CPUFREQ_POSTCHANGE);
+ }
}
out:
static int cris_freq_target(struct cpufreq_policy *policy, unsigned int state)
{
- struct cpufreq_freqs freqs;
reg_clkgen_rw_clk_ctrl clk_ctrl;
clk_ctrl = REG_RD(clkgen, regi_clkgen, rw_clk_ctrl);
- freqs.old = cris_freq_get_cpu_frequency(policy->cpu);
- freqs.new = cris_freq_table[state].frequency;
-
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
local_irq_disable();
/* Even though we may be SMP they will share the same clock
local_irq_enable();
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
return 0;
}
static int cris_freq_target(struct cpufreq_policy *policy, unsigned int state)
{
- struct cpufreq_freqs freqs;
reg_config_rw_clk_ctrl clk_ctrl;
clk_ctrl = REG_RD(config, regi_config, rw_clk_ctrl);
- freqs.old = cris_freq_get_cpu_frequency(policy->cpu);
- freqs.new = cris_freq_table[state].frequency;
-
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
local_irq_disable();
/* Even though we may be SMP they will share the same clock
local_irq_enable();
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
return 0;
}
static int davinci_target(struct cpufreq_policy *policy, unsigned int idx)
{
- int ret = 0;
- struct cpufreq_freqs freqs;
struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
struct clk *armclk = cpufreq.armclk;
+ unsigned int old_freq, new_freq;
+ int ret = 0;
- freqs.old = davinci_getspeed(0);
- freqs.new = pdata->freq_table[idx].frequency;
-
- dev_dbg(cpufreq.dev, "transition: %u --> %u\n", freqs.old, freqs.new);
-
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
+ old_freq = davinci_getspeed(0);
+ new_freq = pdata->freq_table[idx].frequency;
/* if moving to higher frequency, up the voltage beforehand */
- if (pdata->set_voltage && freqs.new > freqs.old) {
+ if (pdata->set_voltage && new_freq > old_freq) {
ret = pdata->set_voltage(idx);
if (ret)
- goto out;
+ return ret;
}
ret = clk_set_rate(armclk, idx);
if (ret)
- goto out;
+ return ret;
if (cpufreq.asyncclk) {
ret = clk_set_rate(cpufreq.asyncclk, cpufreq.asyncrate);
if (ret)
- goto out;
+ return ret;
}
/* if moving to lower freq, lower the voltage after lowering freq */
- if (pdata->set_voltage && freqs.new < freqs.old)
+ if (pdata->set_voltage && new_freq < old_freq)
pdata->set_voltage(idx);
-out:
- if (ret)
- freqs.new = freqs.old;
-
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
- return ret;
+ return 0;
}
static int davinci_cpu_init(struct cpufreq_policy *policy)
static int dbx500_cpufreq_target(struct cpufreq_policy *policy,
unsigned int index)
{
- struct cpufreq_freqs freqs;
- int ret;
-
- freqs.old = policy->cur;
- freqs.new = freq_table[index].frequency;
-
- /* pre-change notification */
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
/* update armss clk frequency */
- ret = clk_set_rate(armss_clk, freqs.new * 1000);
-
- if (ret) {
- pr_err("dbx500-cpufreq: Failed to set armss_clk to %d Hz: error %d\n",
- freqs.new * 1000, ret);
- freqs.new = freqs.old;
- }
-
- /* post change notification */
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
- return ret;
+ return clk_set_rate(armss_clk, freq_table[index].frequency * 1000);
}
static unsigned int dbx500_cpufreq_getspeed(unsigned int cpu)
struct cpufreq_policy *policy,
u32 dest_state)
{
- struct cpufreq_freqs freqs;
u32 lo, hi;
- int err = 0;
int i;
- freqs.old = eps_get(policy->cpu);
- freqs.new = centaur->fsb * ((dest_state >> 8) & 0xff);
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
/* Wait while CPU is busy */
rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
i = 0;
rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
i++;
if (unlikely(i > 64)) {
- err = -ENODEV;
- goto postchange;
+ return -ENODEV;
}
}
/* Set new multiplier and voltage */
rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
i++;
if (unlikely(i > 64)) {
- err = -ENODEV;
- goto postchange;
+ return -ENODEV;
}
} while (lo & ((1 << 16) | (1 << 17)));
- /* Return current frequency */
-postchange:
- rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
- freqs.new = centaur->fsb * ((lo >> 8) & 0xff);
-
#ifdef DEBUG
{
u8 current_multiplier, current_voltage;
current_multiplier);
}
#endif
- if (err)
- freqs.new = freqs.old;
-
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
- return err;
+ return 0;
}
static int eps_target(struct cpufreq_policy *policy, unsigned int index)
static int elanfreq_target(struct cpufreq_policy *policy,
unsigned int state)
{
- struct cpufreq_freqs freqs;
-
- freqs.old = elanfreq_get_cpu_frequency(0);
- freqs.new = elan_multiplier[state].clock;
-
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
- printk(KERN_INFO "elanfreq: attempting to set frequency to %i kHz\n",
- elan_multiplier[state].clock);
-
-
/*
* Access to the Elan's internal registers is indexed via
* 0x22: Chip Setup & Control Register Index Register (CSCI)
udelay(10000);
local_irq_enable();
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
return 0;
}
/*
static struct exynos_dvfs_info *exynos_info;
static struct regulator *arm_regulator;
-static struct cpufreq_freqs freqs;
static unsigned int locking_frequency;
static bool frequency_locked;
struct cpufreq_policy *policy = cpufreq_cpu_get(0);
unsigned int arm_volt, safe_arm_volt = 0;
unsigned int mpll_freq_khz = exynos_info->mpll_freq_khz;
+ unsigned int old_freq;
int index, old_index;
int ret = 0;
- freqs.old = policy->cur;
- freqs.new = target_freq;
+ old_freq = policy->cur;
/*
* The policy max have been changed so that we cannot get proper
* old_index with cpufreq_frequency_table_target(). Thus, ignore
* policy and get the index from the raw freqeuncy table.
*/
- old_index = exynos_cpufreq_get_index(freqs.old);
+ old_index = exynos_cpufreq_get_index(old_freq);
if (old_index < 0) {
ret = old_index;
goto out;
}
arm_volt = volt_table[index];
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
/* When the new frequency is higher than current frequency */
- if ((freqs.new > freqs.old) && !safe_arm_volt) {
+ if ((target_freq > old_freq) && !safe_arm_volt) {
/* Firstly, voltage up to increase frequency */
ret = regulator_set_voltage(arm_regulator, arm_volt, arm_volt);
if (ret) {
pr_err("%s: failed to set cpu voltage to %d\n",
__func__, arm_volt);
- freqs.new = freqs.old;
- goto post_notify;
+ return ret;
}
}
if (ret) {
pr_err("%s: failed to set cpu voltage to %d\n",
__func__, safe_arm_volt);
- freqs.new = freqs.old;
- goto post_notify;
+ return ret;
}
}
exynos_info->set_freq(old_index, index);
-post_notify:
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
- if (ret)
- goto out;
-
/* When the new frequency is lower than current frequency */
- if ((freqs.new < freqs.old) ||
- ((freqs.new > freqs.old) && safe_arm_volt)) {
+ if ((target_freq < old_freq) ||
+ ((target_freq > old_freq) && safe_arm_volt)) {
/* down the voltage after frequency change */
ret = regulator_set_voltage(arm_regulator, arm_volt,
arm_volt);
}
out:
-
cpufreq_cpu_put(policy);
return ret;
{
int ret = 0;
u32 value = 0;
- struct cpufreq_freqs cpufreq_freqs;
cpumask_t saved_mask;
int retval;
pr_debug("Transitioning from P%d to P%d\n",
data->acpi_data.state, state);
- /* cpufreq frequency struct */
- cpufreq_freqs.old = data->freq_table[data->acpi_data.state].frequency;
- cpufreq_freqs.new = data->freq_table[state].frequency;
-
- /* notify cpufreq */
- cpufreq_notify_transition(policy, &cpufreq_freqs, CPUFREQ_PRECHANGE);
-
/*
* First we write the target state's 'control' value to the
* control_register.
ret = processor_set_pstate(value);
if (ret) {
- unsigned int tmp = cpufreq_freqs.new;
- cpufreq_notify_transition(policy, &cpufreq_freqs,
- CPUFREQ_POSTCHANGE);
- cpufreq_freqs.new = cpufreq_freqs.old;
- cpufreq_freqs.old = tmp;
- cpufreq_notify_transition(policy, &cpufreq_freqs,
- CPUFREQ_PRECHANGE);
- cpufreq_notify_transition(policy, &cpufreq_freqs,
- CPUFREQ_POSTCHANGE);
printk(KERN_WARNING "Transition failed with error %d\n", ret);
retval = -ENODEV;
goto migrate_end;
}
- cpufreq_notify_transition(policy, &cpufreq_freqs, CPUFREQ_POSTCHANGE);
-
data->acpi_data.state = state;
retval = 0;
static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index)
{
- struct cpufreq_freqs freqs;
struct dev_pm_opp *opp;
unsigned long freq_hz, volt, volt_old;
+ unsigned int old_freq, new_freq;
int ret;
- freqs.new = freq_table[index].frequency;
- freq_hz = freqs.new * 1000;
- freqs.old = clk_get_rate(arm_clk) / 1000;
+ new_freq = freq_table[index].frequency;
+ freq_hz = new_freq * 1000;
+ old_freq = clk_get_rate(arm_clk) / 1000;
rcu_read_lock();
opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_hz);
volt_old = regulator_get_voltage(arm_reg);
dev_dbg(cpu_dev, "%u MHz, %ld mV --> %u MHz, %ld mV\n",
- freqs.old / 1000, volt_old / 1000,
- freqs.new / 1000, volt / 1000);
-
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
+ old_freq / 1000, volt_old / 1000,
+ new_freq / 1000, volt / 1000);
/* scaling up? scale voltage before frequency */
- if (freqs.new > freqs.old) {
+ if (new_freq > old_freq) {
ret = regulator_set_voltage_tol(arm_reg, volt, 0);
if (ret) {
dev_err(cpu_dev,
"failed to scale vddarm up: %d\n", ret);
- freqs.new = freqs.old;
- goto post_notify;
+ return ret;
}
/*
* Need to increase vddpu and vddsoc for safety
* if we are about to run at 1.2 GHz.
*/
- if (freqs.new == FREQ_1P2_GHZ / 1000) {
+ if (new_freq == FREQ_1P2_GHZ / 1000) {
regulator_set_voltage_tol(pu_reg,
PU_SOC_VOLTAGE_HIGH, 0);
regulator_set_voltage_tol(soc_reg,
clk_set_parent(step_clk, pll2_pfd2_396m_clk);
clk_set_parent(pll1_sw_clk, step_clk);
if (freq_hz > clk_get_rate(pll2_pfd2_396m_clk)) {
- clk_set_rate(pll1_sys_clk, freqs.new * 1000);
+ clk_set_rate(pll1_sys_clk, new_freq * 1000);
clk_set_parent(pll1_sw_clk, pll1_sys_clk);
}
/* Ensure the arm clock divider is what we expect */
- ret = clk_set_rate(arm_clk, freqs.new * 1000);
+ ret = clk_set_rate(arm_clk, new_freq * 1000);
if (ret) {
dev_err(cpu_dev, "failed to set clock rate: %d\n", ret);
regulator_set_voltage_tol(arm_reg, volt_old, 0);
- freqs.new = freqs.old;
- goto post_notify;
+ return ret;
}
/* scaling down? scale voltage after frequency */
- if (freqs.new < freqs.old) {
+ if (new_freq < old_freq) {
ret = regulator_set_voltage_tol(arm_reg, volt, 0);
if (ret) {
dev_warn(cpu_dev,
ret = 0;
}
- if (freqs.old == FREQ_1P2_GHZ / 1000) {
+ if (old_freq == FREQ_1P2_GHZ / 1000) {
regulator_set_voltage_tol(pu_reg,
PU_SOC_VOLTAGE_NORMAL, 0);
regulator_set_voltage_tol(soc_reg,
}
}
-post_notify:
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
- return ret;
+ return 0;
}
static int imx6q_cpufreq_init(struct cpufreq_policy *policy)
static int kirkwood_cpufreq_target(struct cpufreq_policy *policy,
unsigned int index)
{
- struct cpufreq_freqs freqs;
unsigned int state = kirkwood_freq_table[index].driver_data;
unsigned long reg;
- freqs.old = kirkwood_cpufreq_get_cpu_frequency(0);
- freqs.new = kirkwood_freq_table[index].frequency;
+ local_irq_disable();
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
+ /* Disable interrupts to the CPU */
+ reg = readl_relaxed(priv.base);
+ reg |= CPU_SW_INT_BLK;
+ writel_relaxed(reg, priv.base);
- dev_dbg(priv.dev, "Attempting to set frequency to %i KHz\n",
- kirkwood_freq_table[index].frequency);
- dev_dbg(priv.dev, "old frequency was %i KHz\n",
- kirkwood_cpufreq_get_cpu_frequency(0));
-
- if (freqs.old != freqs.new) {
- local_irq_disable();
-
- /* Disable interrupts to the CPU */
- reg = readl_relaxed(priv.base);
- reg |= CPU_SW_INT_BLK;
- writel_relaxed(reg, priv.base);
-
- switch (state) {
- case STATE_CPU_FREQ:
- clk_disable(priv.powersave_clk);
- break;
- case STATE_DDR_FREQ:
- clk_enable(priv.powersave_clk);
- break;
- }
+ switch (state) {
+ case STATE_CPU_FREQ:
+ clk_disable(priv.powersave_clk);
+ break;
+ case STATE_DDR_FREQ:
+ clk_enable(priv.powersave_clk);
+ break;
+ }
- /* Wait-for-Interrupt, while the hardware changes frequency */
- cpu_do_idle();
+ /* Wait-for-Interrupt, while the hardware changes frequency */
+ cpu_do_idle();
- /* Enable interrupts to the CPU */
- reg = readl_relaxed(priv.base);
- reg &= ~CPU_SW_INT_BLK;
- writel_relaxed(reg, priv.base);
+ /* Enable interrupts to the CPU */
+ reg = readl_relaxed(priv.base);
+ reg &= ~CPU_SW_INT_BLK;
+ writel_relaxed(reg, priv.base);
- local_irq_enable();
- }
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
+ local_irq_enable();
return 0;
}
{
unsigned int cpu = policy->cpu;
cpumask_t cpus_allowed;
- struct cpufreq_freqs freqs;
unsigned int freq;
cpus_allowed = current->cpus_allowed;
((cpu_clock_freq / 1000) *
loongson2_clockmod_table[index].driver_data) / 8;
- pr_debug("cpufreq: requested frequency %u Hz\n",
- loongson2_clockmod_table[index].frequency * 1000);
-
- freqs.old = loongson2_cpufreq_get(cpu);
- freqs.new = freq;
- freqs.flags = 0;
-
- /* notifiers */
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
set_cpus_allowed_ptr(current, &cpus_allowed);
/* setting the cpu frequency */
clk_set_rate(cpuclk, freq);
- /* notifiers */
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
- pr_debug("cpufreq: set frequency %u kHz\n", freq);
-
return 0;
}
*/
static int maple_pmode_cur;
-static DEFINE_MUTEX(maple_switch_mutex);
-
static const u32 *maple_pmode_data;
static int maple_pmode_max;
static int maple_cpufreq_target(struct cpufreq_policy *policy,
unsigned int index)
{
- struct cpufreq_freqs freqs;
- int rc;
-
- mutex_lock(&maple_switch_mutex);
-
- freqs.old = maple_cpu_freqs[maple_pmode_cur].frequency;
- freqs.new = maple_cpu_freqs[index].frequency;
-
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
- rc = maple_scom_switch_freq(index);
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
- mutex_unlock(&maple_switch_mutex);
-
- return rc;
+ return maple_scom_switch_freq(index);
}
static unsigned int maple_cpufreq_get_speed(unsigned int cpu)
static int omap_target(struct cpufreq_policy *policy, unsigned int index)
{
- int r, ret = 0;
- struct cpufreq_freqs freqs;
struct dev_pm_opp *opp;
unsigned long freq, volt = 0, volt_old = 0, tol = 0;
+ unsigned int old_freq, new_freq;
- freqs.old = omap_getspeed(policy->cpu);
- freqs.new = freq_table[index].frequency;
+ old_freq = omap_getspeed(policy->cpu);
+ new_freq = freq_table[index].frequency;
- freq = freqs.new * 1000;
+ freq = new_freq * 1000;
ret = clk_round_rate(mpu_clk, freq);
if (IS_ERR_VALUE(ret)) {
dev_warn(mpu_dev,
if (IS_ERR(opp)) {
rcu_read_unlock();
dev_err(mpu_dev, "%s: unable to find MPU OPP for %d\n",
- __func__, freqs.new);
+ __func__, new_freq);
return -EINVAL;
}
volt = dev_pm_opp_get_voltage(opp);
}
dev_dbg(mpu_dev, "cpufreq-omap: %u MHz, %ld mV --> %u MHz, %ld mV\n",
- freqs.old / 1000, volt_old ? volt_old / 1000 : -1,
- freqs.new / 1000, volt ? volt / 1000 : -1);
-
- /* notifiers */
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
+ old_freq / 1000, volt_old ? volt_old / 1000 : -1,
+ new_freq / 1000, volt ? volt / 1000 : -1);
/* scaling up? scale voltage before frequency */
- if (mpu_reg && (freqs.new > freqs.old)) {
+ if (mpu_reg && (new_freq > old_freq)) {
r = regulator_set_voltage(mpu_reg, volt - tol, volt + tol);
if (r < 0) {
dev_warn(mpu_dev, "%s: unable to scale voltage up.\n",
__func__);
- freqs.new = freqs.old;
- goto done;
+ return r;
}
}
- ret = clk_set_rate(mpu_clk, freqs.new * 1000);
+ ret = clk_set_rate(mpu_clk, new_freq * 1000);
/* scaling down? scale voltage after frequency */
- if (mpu_reg && (freqs.new < freqs.old)) {
+ if (mpu_reg && (new_freq < old_freq)) {
r = regulator_set_voltage(mpu_reg, volt - tol, volt + tol);
if (r < 0) {
dev_warn(mpu_dev, "%s: unable to scale voltage down.\n",
__func__);
- ret = clk_set_rate(mpu_clk, freqs.old * 1000);
- freqs.new = freqs.old;
- goto done;
+ clk_set_rate(mpu_clk, old_freq * 1000);
+ return r;
}
}
- freqs.new = omap_getspeed(policy->cpu);
-
-done:
- /* notifiers */
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
return ret;
}
static int cpufreq_p4_target(struct cpufreq_policy *policy, unsigned int index)
{
- struct cpufreq_freqs freqs;
int i;
- freqs.old = cpufreq_p4_get(policy->cpu);
- freqs.new = stock_freq * p4clockmod_table[index].driver_data / 8;
-
- /* notifiers */
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
/* run on each logical CPU,
* see section 13.15.3 of IA32 Intel Architecture Software
* Developer's Manual, Volume 3
for_each_cpu(i, policy->cpus)
cpufreq_p4_setdc(i, p4clockmod_table[index].driver_data);
- /* notifiers */
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
return 0;
}
static void __iomem *sdcpwr_mapbase;
static void __iomem *sdcasr_mapbase;
-static DEFINE_MUTEX(pas_switch_mutex);
-
/* Current astate, is used when waking up from power savings on
* one core, in case the other core has switched states during
* the idle time.
static int pas_cpufreq_target(struct cpufreq_policy *policy,
unsigned int pas_astate_new)
{
- struct cpufreq_freqs freqs;
int i;
- freqs.old = policy->cur;
- freqs.new = pas_freqs[pas_astate_new].frequency;
-
- mutex_lock(&pas_switch_mutex);
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
pr_debug("setting frequency for cpu %d to %d kHz, 1/%d of max frequency\n",
policy->cpu,
pas_freqs[pas_astate_new].frequency,
for_each_online_cpu(i)
set_astate(i, pas_astate_new);
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
- mutex_unlock(&pas_switch_mutex);
-
- ppc_proc_freq = freqs.new * 1000ul;
+ ppc_proc_freq = pas_freqs[pas_astate_new].frequency * 1000ul;
return 0;
}
return 0;
}
-static int do_set_cpu_speed(struct cpufreq_policy *policy, int speed_mode,
- int notify)
+static int do_set_cpu_speed(struct cpufreq_policy *policy, int speed_mode)
{
- struct cpufreq_freqs freqs;
unsigned long l3cr;
static unsigned long prev_l3cr;
- freqs.old = cur_freq;
- freqs.new = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq;
-
- if (freqs.old == freqs.new)
- return 0;
-
- if (notify)
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
if (speed_mode == CPUFREQ_LOW &&
cpu_has_feature(CPU_FTR_L3CR)) {
l3cr = _get_L3CR();
if ((prev_l3cr & L3CR_L3E) && l3cr != prev_l3cr)
_set_L3CR(prev_l3cr);
}
- if (notify)
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq;
return 0;
{
int rc;
- rc = do_set_cpu_speed(policy, index, 1);
+ rc = do_set_cpu_speed(policy, index);
ppc_proc_freq = cur_freq * 1000ul;
return rc;
no_schedule = 1;
sleep_freq = cur_freq;
if (cur_freq == low_freq && !is_pmu_based)
- do_set_cpu_speed(policy, CPUFREQ_HIGH, 0);
+ do_set_cpu_speed(policy, CPUFREQ_HIGH);
return 0;
}
* probably high speed due to our suspend() routine
*/
do_set_cpu_speed(policy, sleep_freq == low_freq ?
- CPUFREQ_LOW : CPUFREQ_HIGH, 0);
+ CPUFREQ_LOW : CPUFREQ_HIGH);
ppc_proc_freq = cur_freq * 1000ul;
static int (*g5_switch_freq)(int speed_mode);
static int (*g5_query_freq)(void);
-static DEFINE_MUTEX(g5_switch_mutex);
-
static unsigned long transition_latency;
#ifdef CONFIG_PMAC_SMU
static int g5_cpufreq_target(struct cpufreq_policy *policy, unsigned int index)
{
- struct cpufreq_freqs freqs;
- int rc;
-
- mutex_lock(&g5_switch_mutex);
-
- freqs.old = g5_cpu_freqs[g5_pmode_cur].frequency;
- freqs.new = g5_cpu_freqs[index].frequency;
-
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
- rc = g5_switch_freq(index);
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
- mutex_unlock(&g5_switch_mutex);
-
- return rc;
+ return g5_switch_freq(index);
}
static unsigned int g5_cpufreq_get_speed(unsigned int cpu)
static u32 min_cpufreq;
static const u32 *fmask;
-/* serialize frequency changes */
-static DEFINE_MUTEX(cpufreq_lock);
static DEFINE_PER_CPU(struct cpu_data *, cpu_data);
/* cpumask in a cluster */
static int corenet_cpufreq_target(struct cpufreq_policy *policy,
unsigned int index)
{
- struct cpufreq_freqs freqs;
struct clk *parent;
- int ret;
struct cpu_data *data = per_cpu(cpu_data, policy->cpu);
- freqs.old = policy->cur;
- freqs.new = data->table[index].frequency;
-
- mutex_lock(&cpufreq_lock);
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
parent = of_clk_get(data->parent, data->table[index].driver_data);
- ret = clk_set_parent(data->clk, parent);
- if (ret)
- freqs.new = freqs.old;
-
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
- mutex_unlock(&cpufreq_lock);
-
- return ret;
+ return clk_set_parent(data->clk, parent);
}
static struct cpufreq_driver ppc_corenet_cpufreq_driver = {
#include "ppc_cbe_cpufreq.h"
-static DEFINE_MUTEX(cbe_switch_mutex);
-
-
/* the CBE supports an 8 step frequency scaling */
static struct cpufreq_frequency_table cbe_freqs[] = {
{1, 0},
static int cbe_cpufreq_target(struct cpufreq_policy *policy,
unsigned int cbe_pmode_new)
{
- int rc;
- struct cpufreq_freqs freqs;
-
- freqs.old = policy->cur;
- freqs.new = cbe_freqs[cbe_pmode_new].frequency;
-
- mutex_lock(&cbe_switch_mutex);
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
pr_debug("setting frequency for cpu %d to %d kHz, " \
"1/%d of max frequency\n",
policy->cpu,
cbe_freqs[cbe_pmode_new].frequency,
cbe_freqs[cbe_pmode_new].driver_data);
- rc = set_pmode(policy->cpu, cbe_pmode_new);
-
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
- mutex_unlock(&cbe_switch_mutex);
-
- return rc;
+ return set_pmode(policy->cpu, cbe_pmode_new);
}
static struct cpufreq_driver cbe_cpufreq_driver = {
{
struct cpufreq_frequency_table *pxa_freqs_table;
pxa_freqs_t *pxa_freq_settings;
- struct cpufreq_freqs freqs;
unsigned long flags;
unsigned int new_freq_cpu, new_freq_mem;
unsigned int unused, preset_mdrefr, postset_mdrefr, cclkcfg;
new_freq_cpu = pxa_freq_settings[idx].khz;
new_freq_mem = pxa_freq_settings[idx].membus;
- freqs.old = policy->cur;
- freqs.new = new_freq_cpu;
if (freq_debug)
pr_debug("Changing CPU frequency to %d Mhz, (SDRAM %d Mhz)\n",
- freqs.new / 1000, (pxa_freq_settings[idx].div2) ?
+ new_freq_cpu / 1000, (pxa_freq_settings[idx].div2) ?
(new_freq_mem / 2000) : (new_freq_mem / 1000));
- if (vcc_core && freqs.new > freqs.old)
+ if (vcc_core && new_freq_cpu > policy->cur) {
ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]);
- if (ret)
- return ret;
- /*
- * Tell everyone what we're about to do...
- * you should add a notify client with any platform specific
- * Vcc changing capability
- */
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
+ if (ret)
+ return ret;
+ }
/* Calculate the next MDREFR. If we're slowing down the SDRAM clock
* we need to preset the smaller DRI before the change. If we're
: "r4", "r5");
local_irq_restore(flags);
- /*
- * Tell everyone what we've just done...
- * you should add a notify client with any platform specific
- * SDRAM refresh timer adjustments
- */
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
/*
* Even if voltage setting fails, we don't report it, as the frequency
* change succeeded. The voltage reduction is not a critical failure,
* bug is triggered (seems a deadlock). Should anybody find out where,
* the "return 0" should become a "return ret".
*/
- if (vcc_core && freqs.new < freqs.old)
+ if (vcc_core && new_freq_cpu < policy->cur)
ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]);
return 0;
static int pxa3xx_cpufreq_set(struct cpufreq_policy *policy, unsigned int index)
{
struct pxa3xx_freq_info *next;
- struct cpufreq_freqs freqs;
unsigned long flags;
if (policy->cpu != 0)
next = &pxa3xx_freqs[index];
- freqs.old = policy->cur;
- freqs.new = next->cpufreq_mhz * 1000;
-
- pr_debug("CPU frequency from %d MHz to %d MHz%s\n",
- freqs.old / 1000, freqs.new / 1000,
- (freqs.old == freqs.new) ? " (skipped)" : "");
-
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
local_irq_save(flags);
__update_core_freq(next);
__update_bus_freq(next);
local_irq_restore(flags);
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
return 0;
}
unsigned int index)
{
struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
- struct cpufreq_freqs freqs;
+ unsigned int new_freq;
int idx, ret, to_dvs = 0;
mutex_lock(&cpufreq_lock);
goto out;
}
- freqs.flags = 0;
- freqs.old = s3c_freq->is_dvs ? FREQ_DVS
- : clk_get_rate(s3c_freq->armclk) / 1000;
-
/* When leavin dvs mode, always switch the armdiv to the hclk rate
* The S3C2416 has stability issues when switching directly to
* higher frequencies.
*/
- freqs.new = (s3c_freq->is_dvs && !to_dvs)
+ new_freq = (s3c_freq->is_dvs && !to_dvs)
? clk_get_rate(s3c_freq->hclk) / 1000
: s3c_freq->freq_table[index].frequency;
- pr_debug("cpufreq: Transition %d-%dkHz\n", freqs.old, freqs.new);
-
- if (!to_dvs && freqs.old == freqs.new)
- goto out;
-
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
if (to_dvs) {
pr_debug("cpufreq: enter dvs\n");
ret = s3c2416_cpufreq_enter_dvs(s3c_freq, idx);
pr_debug("cpufreq: leave dvs\n");
ret = s3c2416_cpufreq_leave_dvs(s3c_freq, idx);
} else {
- pr_debug("cpufreq: change armdiv to %dkHz\n", freqs.new);
- ret = s3c2416_cpufreq_set_armdiv(s3c_freq, freqs.new);
+ pr_debug("cpufreq: change armdiv to %dkHz\n", new_freq);
+ ret = s3c2416_cpufreq_set_armdiv(s3c_freq, new_freq);
}
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
out:
mutex_unlock(&cpufreq_lock);
static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy,
unsigned int index)
{
- int ret;
- struct cpufreq_freqs freqs;
struct s3c64xx_dvfs *dvfs;
+ unsigned int old_freq, new_freq;
+ int ret;
- freqs.old = clk_get_rate(armclk) / 1000;
- freqs.new = s3c64xx_freq_table[index].frequency;
- freqs.flags = 0;
+ old_freq = clk_get_rate(armclk) / 1000;
+ new_freq = s3c64xx_freq_table[index].frequency;
dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[index].driver_data];
- pr_debug("Transition %d-%dkHz\n", freqs.old, freqs.new);
-
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
#ifdef CONFIG_REGULATOR
- if (vddarm && freqs.new > freqs.old) {
+ if (vddarm && new_freq > old_freq) {
ret = regulator_set_voltage(vddarm,
dvfs->vddarm_min,
dvfs->vddarm_max);
if (ret != 0) {
pr_err("Failed to set VDDARM for %dkHz: %d\n",
- freqs.new, ret);
- freqs.new = freqs.old;
- goto post_notify;
+ new_freq, ret);
+ return ret;
}
}
#endif
- ret = clk_set_rate(armclk, freqs.new * 1000);
+ ret = clk_set_rate(armclk, new_freq * 1000);
if (ret < 0) {
pr_err("Failed to set rate %dkHz: %d\n",
- freqs.new, ret);
- freqs.new = freqs.old;
+ new_freq, ret);
+ return ret;
}
-post_notify:
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
- if (ret)
- goto err;
-
#ifdef CONFIG_REGULATOR
- if (vddarm && freqs.new < freqs.old) {
+ if (vddarm && new_freq < old_freq) {
ret = regulator_set_voltage(vddarm,
dvfs->vddarm_min,
dvfs->vddarm_max);
if (ret != 0) {
pr_err("Failed to set VDDARM for %dkHz: %d\n",
- freqs.new, ret);
- goto err_clk;
+ new_freq, ret);
+ if (clk_set_rate(armclk, old_freq * 1000) < 0)
+ pr_err("Failed to restore original clock rate\n");
+
+ return ret;
}
}
#endif
clk_get_rate(armclk) / 1000);
return 0;
-
-err_clk:
- if (clk_set_rate(armclk, freqs.old * 1000) < 0)
- pr_err("Failed to restore original clock rate\n");
-err:
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
- return ret;
}
#ifdef CONFIG_REGULATOR
static struct clk *cpu_clk;
static struct clk *dmc0_clk;
static struct clk *dmc1_clk;
-static struct cpufreq_freqs freqs;
static DEFINE_MUTEX(set_freq_lock);
/* APLL M,P,S values for 1G/800Mhz */
unsigned int priv_index;
unsigned int pll_changing = 0;
unsigned int bus_speed_changing = 0;
+ unsigned int old_freq, new_freq;
int arm_volt, int_volt;
int ret = 0;
goto exit;
}
- freqs.old = s5pv210_getspeed(0);
- freqs.new = s5pv210_freq_table[index].frequency;
+ old_freq = s5pv210_getspeed(0);
+ new_freq = s5pv210_freq_table[index].frequency;
/* Finding current running level index */
if (cpufreq_frequency_table_target(policy, s5pv210_freq_table,
- freqs.old, CPUFREQ_RELATION_H,
+ old_freq, CPUFREQ_RELATION_H,
&priv_index)) {
ret = -EINVAL;
goto exit;
arm_volt = dvs_conf[index].arm_volt;
int_volt = dvs_conf[index].int_volt;
- if (freqs.new > freqs.old) {
+ if (new_freq > old_freq) {
ret = regulator_set_voltage(arm_regulator,
arm_volt, arm_volt_max);
if (ret)
goto exit;
}
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
/* Check if there need to change PLL */
if ((index == L0) || (priv_index == L0))
pll_changing = 1;
}
}
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
- if (freqs.new < freqs.old) {
+ if (new_freq < old_freq) {
regulator_set_voltage(int_regulator,
int_volt, int_volt_max);
static int sa1100_target(struct cpufreq_policy *policy, unsigned int ppcr)
{
unsigned int cur = sa11x0_getspeed(0);
- struct cpufreq_freqs freqs;
+ unsigned int new_freq;
- freqs.old = cur;
- freqs.new = sa11x0_freq_table[ppcr].frequency;
+ new_freq = sa11x0_freq_table[ppcr].frequency;
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
- if (freqs.new > cur)
- sa1100_update_dram_timings(cur, freqs.new);
+ if (new_freq > cur)
+ sa1100_update_dram_timings(cur, new_freq);
PPCR = ppcr;
- if (freqs.new < cur)
- sa1100_update_dram_timings(cur, freqs.new);
-
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
+ if (new_freq < cur)
+ sa1100_update_dram_timings(cur, new_freq);
return 0;
}
static int sa1110_target(struct cpufreq_policy *policy, unsigned int ppcr)
{
struct sdram_params *sdram = &sdram_params;
- struct cpufreq_freqs freqs;
struct sdram_info sd;
unsigned long flags;
unsigned int unused;
- freqs.old = sa11x0_getspeed(0);
- freqs.new = sa11x0_freq_table[ppcr].frequency;
-
- sdram_calculate_timing(&sd, freqs.new, sdram);
+ sdram_calculate_timing(&sd, sa11x0_freq_table[ppcr].frequency, sdram);
#if 0
/*
sd.mdcas[2] = 0xaaaaaaaa;
#endif
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
/*
* The clock could be going away for some time. Set the SDRAMs
* to refresh rapidly (every 64 memory clock cycles). To get
/*
* Now, return the SDRAM refresh back to normal.
*/
- sdram_update_refresh(freqs.new, sdram);
-
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
+ sdram_update_refresh(sa11x0_freq_table[ppcr].frequency, sdram);
return 0;
}
static int sc520_freq_target(struct cpufreq_policy *policy, unsigned int state)
{
- struct cpufreq_freqs freqs;
u8 clockspeed_reg;
- freqs.old = sc520_freq_get_cpu_frequency(0);
- freqs.new = sc520_freq_table[state].frequency;
-
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
- pr_debug("attempting to set frequency to %i kHz\n",
- sc520_freq_table[state].frequency);
-
local_irq_disable();
clockspeed_reg = *cpuctl & ~0x03;
local_irq_enable();
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
return 0;
}
unsigned long new_bits, new_freq;
unsigned long clock_tick, divisor, old_divisor, estar;
cpumask_t cpus_allowed;
- struct cpufreq_freqs freqs;
cpumask_copy(&cpus_allowed, tsk_cpus_allowed(current));
set_cpus_allowed_ptr(current, cpumask_of(cpu));
old_divisor = estar_to_divisor(estar);
- freqs.old = clock_tick / old_divisor;
- freqs.new = new_freq;
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
if (old_divisor != divisor)
us2e_transition(estar, new_bits, clock_tick * 1000,
old_divisor, divisor);
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
set_cpus_allowed_ptr(current, &cpus_allowed);
return 0;
unsigned int cpu = policy->cpu;
unsigned long new_bits, new_freq, reg;
cpumask_t cpus_allowed;
- struct cpufreq_freqs freqs;
cpumask_copy(&cpus_allowed, tsk_cpus_allowed(current));
set_cpus_allowed_ptr(current, cpumask_of(cpu));
reg = read_safari_cfg();
- freqs.old = get_current_freq(cpu, reg);
- freqs.new = new_freq;
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
reg &= ~SAFARI_CFG_DIV_MASK;
reg |= new_bits;
write_safari_cfg(reg);
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
set_cpus_allowed_ptr(current, &cpus_allowed);
return 0;
static int spear_cpufreq_target(struct cpufreq_policy *policy,
unsigned int index)
{
- struct cpufreq_freqs freqs;
long newfreq;
struct clk *srcclk;
int ret, mult = 1;
- freqs.old = spear_cpufreq_get(0);
newfreq = spear_cpufreq.freq_tbl[index].frequency * 1000;
if (of_machine_is_compatible("st,spear1340")) {
return newfreq;
}
- freqs.new = newfreq / 1000;
- freqs.new /= mult;
-
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
if (mult == 2)
ret = spear1340_set_cpu_rate(srcclk, newfreq);
else
ret = clk_set_rate(spear_cpufreq.clk, newfreq);
- /* Get current rate after clk_set_rate, in case of failure */
- if (ret) {
+ if (ret)
pr_err("CPU Freq: cpu clk_set_rate failed: %d\n", ret);
- freqs.new = clk_get_rate(spear_cpufreq.clk) / 1000;
- }
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
return ret;
}
static int centrino_target(struct cpufreq_policy *policy, unsigned int index)
{
unsigned int msr, oldmsr = 0, h = 0, cpu = policy->cpu;
- struct cpufreq_freqs freqs;
int retval = 0;
- unsigned int j, first_cpu, tmp;
+ unsigned int j, first_cpu;
struct cpufreq_frequency_table *op_points;
cpumask_var_t covered_cpus;
goto out;
}
- freqs.old = extract_clock(oldmsr, cpu, 0);
- freqs.new = extract_clock(msr, cpu, 0);
-
- pr_debug("target=%dkHz old=%d new=%d msr=%04x\n",
- op_points->frequency, freqs.old, freqs.new,
- msr);
-
- cpufreq_notify_transition(policy, &freqs,
- CPUFREQ_PRECHANGE);
-
first_cpu = 0;
/* all but 16 LSB are reserved, treat them with care */
oldmsr &= ~0xffff;
cpumask_set_cpu(j, covered_cpus);
}
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
if (unlikely(retval)) {
/*
* We have failed halfway through the frequency change.
for_each_cpu(j, covered_cpus)
wrmsr_on_cpu(j, MSR_IA32_PERF_CTL, oldmsr, h);
-
- tmp = freqs.new;
- freqs.new = freqs.old;
- freqs.old = tmp;
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
}
retval = 0;
static int speedstep_target(struct cpufreq_policy *policy, unsigned int index)
{
unsigned int policy_cpu;
- struct cpufreq_freqs freqs;
policy_cpu = cpumask_any_and(policy->cpus, cpu_online_mask);
- freqs.old = speedstep_get(policy_cpu);
- freqs.new = speedstep_freqs[index].frequency;
-
- pr_debug("transiting from %u to %u kHz\n", freqs.old, freqs.new);
-
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
smp_call_function_single(policy_cpu, _speedstep_set_state, &index,
true);
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
return 0;
}
*/
static int speedstep_target(struct cpufreq_policy *policy, unsigned int index)
{
- struct cpufreq_freqs freqs;
-
- freqs.old = speedstep_freqs[speedstep_get_state()].frequency;
- freqs.new = speedstep_freqs[index].frequency;
-
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
speedstep_set_state(index);
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
return 0;
}
unsigned long rate)
{
int ret = 0;
- struct cpufreq_freqs freqs;
- freqs.old = tegra_getspeed(0);
- freqs.new = rate;
-
- if (freqs.old == freqs.new)
+ if (tegra_getspeed(0) == rate)
return ret;
/*
else
clk_set_rate(emc_clk, 100000000); /* emc 50Mhz */
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
-#ifdef CONFIG_CPU_FREQ_DEBUG
- printk(KERN_DEBUG "cpufreq-tegra: transition: %u --> %u\n",
- freqs.old, freqs.new);
-#endif
-
- ret = tegra_cpu_clk_set_rate(freqs.new * 1000);
- if (ret) {
- pr_err("cpu-tegra: Failed to set cpu frequency to %d kHz\n",
- freqs.new);
- freqs.new = freqs.old;
- }
-
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
+ ret = tegra_cpu_clk_set_rate(rate * 1000);
+ if (ret)
+ pr_err("cpu-tegra: Failed to set cpu frequency to %lu kHz\n",
+ rate);
return ret;
}
projects / linux-beck.git / commitdiff