--- /dev/null
+/*
+ * comedi_8254.c
+ * Generic 8254 timer/counter support
+ * Copyright (C) 2014 H Hartley Sweeten <hsweeten@visionengravers.com>
+ *
+ * Based on 8253.h and various subdevice implementations in comedi drivers.
+ *
+ * COMEDI - Linux Control and Measurement Device Interface
+ * Copyright (C) 2000 David A. Schleef <ds@schleef.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Module: comedi_8254
+ * Description: Generic 8254 timer/counter support
+ * Author: H Hartley Sweeten <hsweeten@visionengravers.com>
+ * Updated: Thu Jan 8 16:45:45 MST 2015
+ * Status: works
+ *
+ * This module is not used directly by end-users. Rather, it is used by other
+ * drivers to provide support for an 8254 Programmable Interval Timer. These
+ * counters are typically used to generate the pacer clock used for data
+ * acquisition. Some drivers also expose the counters for general purpose use.
+ *
+ * This module provides the following basic functions:
+ *
+ * comedi_8254_init() / comedi_8254_mm_init()
+ * Initializes this module to access the 8254 registers. The _mm version
+ * sets up the module for MMIO register access the other for PIO access.
+ * The pointer returned from these functions is normally stored in the
+ * comedi_device dev->pacer and will be freed by the comedi core during
+ * the driver (*detach). If a driver has multiple 8254 devices, they need
+ * to be stored in the drivers private data and freed when the driver is
+ * detached.
+ *
+ * NOTE: The counters are reset by setting them to I8254_MODE0 as part of
+ * this initialization.
+ *
+ * comedi_8254_set_mode()
+ * Sets a counters operation mode:
+ * I8254_MODE0 Interrupt on terminal count
+ * I8254_MODE1 Hardware retriggerable one-shot
+ * I8254_MODE2 Rate generator
+ * I8254_MODE3 Square wave mode
+ * I8254_MODE4 Software triggered strobe
+ * I8254_MODE5 Hardware triggered strobe (retriggerable)
+ *
+ * In addition I8254_BCD and I8254_BINARY specify the counting mode:
+ * I8254_BCD BCD counting
+ * I8254_BINARY Binary counting
+ *
+ * comedi_8254_write()
+ * Writes an initial value to a counter.
+ *
+ * The largest possible initial count is 0; this is equivalent to 2^16
+ * for binary counting and 10^4 for BCD counting.
+ *
+ * NOTE: The counter does not stop when it reaches zero. In Mode 0, 1, 4,
+ * and 5 the counter "wraps around" to the highest count, either 0xffff
+ * for binary counting or 9999 for BCD counting, and continues counting.
+ * Modes 2 and 3 are periodic; the counter reloads itself with the initial
+ * count and continues counting from there.
+ *
+ * comedi_8254_read()
+ * Reads the current value from a counter.
+ *
+ * comedi_8254_status()
+ * Reads the status of a counter.
+ *
+ * comedi_8254_load()
+ * Sets a counters operation mode and writes the initial value.
+ *
+ * Typically the pacer clock is created by cascading two of the 16-bit counters
+ * to create a 32-bit rate generator (I8254_MODE2). These functions are
+ * provided to handle the cascaded counters:
+ *
+ * comedi_8254_ns_to_timer()
+ * Calculates the divisor value needed for a single counter to generate
+ * ns timing.
+ *
+ * comedi_8254_cascade_ns_to_timer()
+ * Calculates the two divisor values needed to the generate the pacer
+ * clock (in ns).
+ *
+ * comedi_8254_update_divisors()
+ * Transfers the intermediate divisor values to the current divisors.
+ *
+ * comedi_8254_pacer_enable()
+ * Programs the mode of the cascaded counters and writes the current
+ * divisor values.
+ *
+ * To expose the counters as a subdevice for general purpose use the following
+ * functions a provided:
+ *
+ * comedi_8254_subdevice_init()
+ * Initializes a comedi_subdevice to use the 8254 timer.
+ *
+ * comedi_8254_set_busy()
+ * Internally flags a counter as "busy". This is done to protect the
+ * counters that are used for the cascaded 32-bit pacer.
+ *
+ * The subdevice provides (*insn_read) and (*insn_write) operations to read
+ * the current value and write an initial value to a counter. A (*insn_config)
+ * operation is also provided to handle the following comedi instructions:
+ *
+ * INSN_CONFIG_SET_COUNTER_MODE calls comedi_8254_set_mode()
+ * INSN_CONFIG_8254_READ_STATUS calls comedi_8254_status()
+ *
+ * The (*insn_config) member of comedi_8254 can be initialized by the external
+ * driver to handle any additional instructions.
+ *
+ * NOTE: Gate control, clock routing, and any interrupt handling for the
+ * counters is not handled by this module. These features are driver dependent.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+
+#include "../comedidev.h"
+
+#include "comedi_8254.h"
+
+static unsigned int __i8254_read(struct comedi_8254 *i8254, unsigned int reg)
+{
+ unsigned int reg_offset = (reg * i8254->iosize) << i8254->regshift;
+ unsigned int val;
+
+ switch (i8254->iosize) {
+ default:
+ case I8254_IO8:
+ if (i8254->mmio)
+ val = readb(i8254->mmio + reg_offset);
+ else
+ val = inb(i8254->iobase + reg_offset);
+ break;
+ case I8254_IO16:
+ if (i8254->mmio)
+ val = readw(i8254->mmio + reg_offset);
+ else
+ val = inw(i8254->iobase + reg_offset);
+ break;
+ case I8254_IO32:
+ if (i8254->mmio)
+ val = readl(i8254->mmio + reg_offset);
+ else
+ val = inl(i8254->iobase + reg_offset);
+ break;
+ }
+ return val & 0xff;
+}
+
+static void __i8254_write(struct comedi_8254 *i8254,
+ unsigned int val, unsigned int reg)
+{
+ unsigned int reg_offset = (reg * i8254->iosize) << i8254->regshift;
+
+ switch (i8254->iosize) {
+ default:
+ case I8254_IO8:
+ if (i8254->mmio)
+ writeb(val, i8254->mmio + reg_offset);
+ else
+ outb(val, i8254->iobase + reg_offset);
+ break;
+ case I8254_IO16:
+ if (i8254->mmio)
+ writew(val, i8254->mmio + reg_offset);
+ else
+ outw(val, i8254->iobase + reg_offset);
+ break;
+ case I8254_IO32:
+ if (i8254->mmio)
+ writel(val, i8254->mmio + reg_offset);
+ else
+ outl(val, i8254->iobase + reg_offset);
+ break;
+ }
+}
+
+/**
+ * comedi_8254_status - return the status of a counter
+ * @i8254: comedi_8254 struct for the timer
+ * @counter: the counter number
+ */
+unsigned int comedi_8254_status(struct comedi_8254 *i8254, unsigned int counter)
+{
+ unsigned int cmd;
+
+ if (counter > 2)
+ return 0;
+
+ cmd = I8254_CTRL_READBACK_STATUS | I8254_CTRL_READBACK_SEL_CTR(counter);
+ __i8254_write(i8254, cmd, I8254_CTRL_REG);
+
+ return __i8254_read(i8254, counter);
+}
+EXPORT_SYMBOL_GPL(comedi_8254_status);
+
+/**
+ * comedi_8254_read - read the current counter value
+ * @i8254: comedi_8254 struct for the timer
+ * @counter: the counter number
+ */
+unsigned int comedi_8254_read(struct comedi_8254 *i8254, unsigned int counter)
+{
+ unsigned int val;
+
+ if (counter > 2)
+ return 0;
+
+ /* latch counter */
+ __i8254_write(i8254, I8254_CTRL_SEL_CTR(counter) | I8254_CTRL_LATCH,
+ I8254_CTRL_REG);
+
+ /* read LSB then MSB */
+ val = __i8254_read(i8254, counter);
+ val |= (__i8254_read(i8254, counter) << 8);
+
+ return val;
+}
+EXPORT_SYMBOL_GPL(comedi_8254_read);
+
+/**
+ * comedi_8254_write - load a 16-bit initial counter value
+ * @i8254: comedi_8254 struct for the timer
+ * @counter: the counter number
+ * @val: the initial value
+ */
+void comedi_8254_write(struct comedi_8254 *i8254,
+ unsigned int counter, unsigned int val)
+{
+ unsigned int byte;
+
+ if (counter > 2)
+ return;
+ if (val > 0xffff)
+ return;
+
+ /* load LSB then MSB */
+ byte = val & 0xff;
+ __i8254_write(i8254, byte, counter);
+ byte = (val >> 8) & 0xff;
+ __i8254_write(i8254, byte, counter);
+}
+EXPORT_SYMBOL_GPL(comedi_8254_write);
+
+/**
+ * comedi_8254_set_mode - set the mode of a counter
+ * @i8254: comedi_8254 struct for the timer
+ * @counter: the counter number
+ * @mode: the I8254_MODEx and I8254_BCD|I8254_BINARY
+ */
+int comedi_8254_set_mode(struct comedi_8254 *i8254, unsigned int counter,
+ unsigned int mode)
+{
+ unsigned int byte;
+
+ if (counter > 2)
+ return -EINVAL;
+ if (mode > (I8254_MODE5 | I8254_BCD))
+ return -EINVAL;
+
+ byte = I8254_CTRL_SEL_CTR(counter) | /* select counter */
+ I8254_CTRL_LSB_MSB | /* load LSB then MSB */
+ mode; /* mode and BCD|binary */
+ __i8254_write(i8254, byte, I8254_CTRL_REG);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(comedi_8254_set_mode);
+
+/**
+ * comedi_8254_load - program the mode and initial count of a counter
+ * @i8254: comedi_8254 struct for the timer
+ * @counter: the counter number
+ * @mode: the I8254_MODEx and I8254_BCD|I8254_BINARY
+ * @val: the initial value
+ */
+int comedi_8254_load(struct comedi_8254 *i8254, unsigned int counter,
+ unsigned int val, unsigned int mode)
+{
+ if (counter > 2)
+ return -EINVAL;
+ if (val > 0xffff)
+ return -EINVAL;
+ if (mode > (I8254_MODE5 | I8254_BCD))
+ return -EINVAL;
+
+ comedi_8254_set_mode(i8254, counter, mode);
+ comedi_8254_write(i8254, counter, val);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(comedi_8254_load);
+
+/**
+ * comedi_8254_pacer_enable - set the mode and load the cascaded counters
+ * @i8254: comedi_8254 struct for the timer
+ * @counter1: the counter number for the first divisor
+ * @counter2: the counter number for the second divisor
+ * @enable: flag to enable (load) the counters
+ */
+void comedi_8254_pacer_enable(struct comedi_8254 *i8254,
+ unsigned int counter1,
+ unsigned int counter2,
+ bool enable)
+{
+ unsigned int mode;
+
+ if (counter1 > 2 || counter2 > 2 || counter1 == counter2)
+ return;
+
+ if (enable)
+ mode = I8254_MODE2 | I8254_BINARY;
+ else
+ mode = I8254_MODE0 | I8254_BINARY;
+
+ comedi_8254_set_mode(i8254, counter1, mode);
+ comedi_8254_set_mode(i8254, counter2, mode);
+
+ if (enable) {
+ /*
+ * Divisors are loaded second counter then first counter to
+ * avoid possible issues with the first counter expiring
+ * before the second counter is loaded.
+ */
+ comedi_8254_write(i8254, counter2, i8254->divisor2);
+ comedi_8254_write(i8254, counter1, i8254->divisor1);
+ }
+}
+EXPORT_SYMBOL_GPL(comedi_8254_pacer_enable);
+
+/**
+ * comedi_8254_update_divisors - update the divisors for the cascaded counters
+ * @i8254: comedi_8254 struct for the timer
+ */
+void comedi_8254_update_divisors(struct comedi_8254 *i8254)
+{
+ /* masking is done since counter maps zero to 0x10000 */
+ i8254->divisor = i8254->next_div & 0xffff;
+ i8254->divisor1 = i8254->next_div1 & 0xffff;
+ i8254->divisor2 = i8254->next_div2 & 0xffff;
+}
+EXPORT_SYMBOL_GPL(comedi_8254_update_divisors);
+
+/**
+ * comedi_8254_cascade_ns_to_timer - calculate the cascaded divisor values
+ * @i8254: comedi_8254 struct for the timer
+ * @nanosec: the desired ns time
+ * @flags: comedi_cmd flags
+ */
+void comedi_8254_cascade_ns_to_timer(struct comedi_8254 *i8254,
+ unsigned int *nanosec,
+ unsigned int flags)
+{
+ unsigned int d1 = i8254->next_div1 ? i8254->next_div1 : I8254_MAX_COUNT;
+ unsigned int d2 = i8254->next_div2 ? i8254->next_div2 : I8254_MAX_COUNT;
+ unsigned int div = d1 * d2;
+ unsigned int ns_lub = 0xffffffff;
+ unsigned int ns_glb = 0;
+ unsigned int d1_lub = 0;
+ unsigned int d1_glb = 0;
+ unsigned int d2_lub = 0;
+ unsigned int d2_glb = 0;
+ unsigned int start;
+ unsigned int ns;
+ unsigned int ns_low;
+ unsigned int ns_high;
+
+ /* exit early if everything is already correct */
+ if (div * i8254->osc_base == *nanosec &&
+ d1 > 1 && d1 <= I8254_MAX_COUNT &&
+ d2 > 1 && d2 <= I8254_MAX_COUNT &&
+ /* check for overflow */
+ div > d1 && div > d2 &&
+ div * i8254->osc_base > div &&
+ div * i8254->osc_base > i8254->osc_base)
+ return;
+
+ div = *nanosec / i8254->osc_base;
+ d2 = I8254_MAX_COUNT;
+ start = div / d2;
+ if (start < 2)
+ start = 2;
+ for (d1 = start; d1 <= div / d1 + 1 && d1 <= I8254_MAX_COUNT; d1++) {
+ for (d2 = div / d1;
+ d1 * d2 <= div + d1 + 1 && d2 <= I8254_MAX_COUNT; d2++) {
+ ns = i8254->osc_base * d1 * d2;
+ if (ns <= *nanosec && ns > ns_glb) {
+ ns_glb = ns;
+ d1_glb = d1;
+ d2_glb = d2;
+ }
+ if (ns >= *nanosec && ns < ns_lub) {
+ ns_lub = ns;
+ d1_lub = d1;
+ d2_lub = d2;
+ }
+ }
+ }
+
+ switch (flags & CMDF_ROUND_MASK) {
+ case CMDF_ROUND_NEAREST:
+ default:
+ ns_high = d1_lub * d2_lub * i8254->osc_base;
+ ns_low = d1_glb * d2_glb * i8254->osc_base;
+ if (ns_high - *nanosec < *nanosec - ns_low) {
+ d1 = d1_lub;
+ d2 = d2_lub;
+ } else {
+ d1 = d1_glb;
+ d2 = d2_glb;
+ }
+ break;
+ case CMDF_ROUND_UP:
+ d1 = d1_lub;
+ d2 = d2_lub;
+ break;
+ case CMDF_ROUND_DOWN:
+ d1 = d1_glb;
+ d2 = d2_glb;
+ break;
+ }
+
+ *nanosec = d1 * d2 * i8254->osc_base;
+ i8254->next_div1 = d1;
+ i8254->next_div2 = d2;
+}
+EXPORT_SYMBOL_GPL(comedi_8254_cascade_ns_to_timer);
+
+/**
+ * comedi_8254_ns_to_timer - calculate the divisor value for nanosec timing
+ * @i8254: comedi_8254 struct for the timer
+ * @nanosec: the desired ns time
+ * @flags: comedi_cmd flags
+ */
+void comedi_8254_ns_to_timer(struct comedi_8254 *i8254,
+ unsigned int *nanosec, unsigned int flags)
+{
+ unsigned int divisor;
+
+ switch (flags & CMDF_ROUND_MASK) {
+ default:
+ case CMDF_ROUND_NEAREST:
+ divisor = DIV_ROUND_CLOSEST(*nanosec, i8254->osc_base);
+ break;
+ case CMDF_ROUND_UP:
+ divisor = DIV_ROUND_UP(*nanosec, i8254->osc_base);
+ break;
+ case CMDF_ROUND_DOWN:
+ divisor = *nanosec / i8254->osc_base;
+ break;
+ }
+ if (divisor < 2)
+ divisor = 2;
+ if (divisor > I8254_MAX_COUNT)
+ divisor = I8254_MAX_COUNT;
+
+ *nanosec = divisor * i8254->osc_base;
+ i8254->next_div = divisor;
+}
+EXPORT_SYMBOL_GPL(comedi_8254_ns_to_timer);
+
+/**
+ * comedi_8254_set_busy - set/clear the "busy" flag for a given counter
+ * @i8254: comedi_8254 struct for the timer
+ * @counter: the counter number
+ * @busy: set/clear flag
+ */
+void comedi_8254_set_busy(struct comedi_8254 *i8254,
+ unsigned int counter, bool busy)
+{
+ if (counter < 3)
+ i8254->busy[counter] = busy;
+}
+EXPORT_SYMBOL_GPL(comedi_8254_set_busy);
+
+static int comedi_8254_insn_read(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
+{
+ struct comedi_8254 *i8254 = s->private;
+ unsigned int chan = CR_CHAN(insn->chanspec);
+ int i;
+
+ if (i8254->busy[chan])
+ return -EBUSY;
+
+ for (i = 0; i < insn->n; i++)
+ data[i] = comedi_8254_read(i8254, chan);
+
+ return insn->n;
+}
+
+static int comedi_8254_insn_write(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
+{
+ struct comedi_8254 *i8254 = s->private;
+ unsigned int chan = CR_CHAN(insn->chanspec);
+
+ if (i8254->busy[chan])
+ return -EBUSY;
+
+ if (insn->n)
+ comedi_8254_write(i8254, chan, data[insn->n - 1]);
+
+ return insn->n;
+}
+
+static int comedi_8254_insn_config(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
+{
+ struct comedi_8254 *i8254 = s->private;
+ unsigned int chan = CR_CHAN(insn->chanspec);
+ int ret;
+
+ if (i8254->busy[chan])
+ return -EBUSY;
+
+ switch (data[0]) {
+ case INSN_CONFIG_RESET:
+ ret = comedi_8254_set_mode(i8254, chan,
+ I8254_MODE0 | I8254_BINARY);
+ if (ret)
+ return ret;
+ break;
+ case INSN_CONFIG_SET_COUNTER_MODE:
+ ret = comedi_8254_set_mode(i8254, chan, data[1]);
+ if (ret)
+ return ret;
+ break;
+ case INSN_CONFIG_8254_READ_STATUS:
+ data[1] = comedi_8254_status(i8254, chan);
+ break;
+ default:
+ /*
+ * If available, call the driver provided (*insn_config)
+ * to handle any driver implemented instructions.
+ */
+ if (i8254->insn_config)
+ return i8254->insn_config(dev, s, insn, data);
+
+ return -EINVAL;
+ }
+
+ return insn->n;
+}
+
+/**
+ * comedi_8254_subdevice_init - initialize a comedi_subdevice for the 8254 timer
+ * @s: comedi_subdevice struct
+ */
+void comedi_8254_subdevice_init(struct comedi_subdevice *s,
+ struct comedi_8254 *i8254)
+{
+ s->type = COMEDI_SUBD_COUNTER;
+ s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+ s->n_chan = 3;
+ s->maxdata = 0xffff;
+ s->range_table = &range_unknown;
+ s->insn_read = comedi_8254_insn_read;
+ s->insn_write = comedi_8254_insn_write;
+ s->insn_config = comedi_8254_insn_config;
+
+ s->private = i8254;
+}
+EXPORT_SYMBOL_GPL(comedi_8254_subdevice_init);
+
+static struct comedi_8254 *__i8254_init(unsigned long iobase,
+ void __iomem *mmio,
+ unsigned int osc_base,
+ unsigned int iosize,
+ unsigned int regshift)
+{
+ struct comedi_8254 *i8254;
+ int i;
+
+ /* sanity check that the iosize is valid */
+ if (!(iosize == I8254_IO8 || iosize == I8254_IO16 ||
+ iosize == I8254_IO32))
+ return NULL;
+
+ i8254 = kzalloc(sizeof(*i8254), GFP_KERNEL);
+ if (!i8254)
+ return NULL;
+
+ i8254->iobase = iobase;
+ i8254->mmio = mmio;
+ i8254->iosize = iosize;
+ i8254->regshift = regshift;
+
+ /* default osc_base to the max speed of a generic 8254 timer */
+ i8254->osc_base = osc_base ? osc_base : I8254_OSC_BASE_10MHZ;
+
+ /* reset all the counters by setting them to I8254_MODE0 */
+ for (i = 0; i < 3; i++)
+ comedi_8254_set_mode(i8254, i, I8254_MODE0 | I8254_BINARY);
+
+ return i8254;
+}
+
+/**
+ * comedi_8254_init - allocate and initialize the 8254 device for pio access
+ * @mmio: port I/O base address
+ * @osc_base: base time of the counter in ns
+ * OPTIONAL - only used by comedi_8254_cascade_ns_to_timer()
+ * @iosize: I/O register size
+ * @regshift: register gap shift
+ */
+struct comedi_8254 *comedi_8254_init(unsigned long iobase,
+ unsigned int osc_base,
+ unsigned int iosize,
+ unsigned int regshift)
+{
+ return __i8254_init(iobase, NULL, osc_base, iosize, regshift);
+}
+EXPORT_SYMBOL_GPL(comedi_8254_init);
+
+/**
+ * comedi_8254_mm_init - allocate and initialize the 8254 device for mmio access
+ * @mmio: memory mapped I/O base address
+ * @osc_base: base time of the counter in ns
+ * OPTIONAL - only used by comedi_8254_cascade_ns_to_timer()
+ * @iosize: I/O register size
+ * @regshift: register gap shift
+ */
+struct comedi_8254 *comedi_8254_mm_init(void __iomem *mmio,
+ unsigned int osc_base,
+ unsigned int iosize,
+ unsigned int regshift)
+{
+ return __i8254_init(0, mmio, osc_base, iosize, regshift);
+}
+EXPORT_SYMBOL_GPL(comedi_8254_mm_init);
+
+static int __init comedi_8254_module_init(void)
+{
+ return 0;
+}
+module_init(comedi_8254_module_init);
+
+static void __exit comedi_8254_module_exit(void)
+{
+}
+module_exit(comedi_8254_module_exit);
+
+MODULE_AUTHOR("H Hartley Sweeten <hsweeten@visionengravers.com>");
+MODULE_DESCRIPTION("Comedi: Generic 8254 timer/counter support");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * comedi_8254.h
+ * Generic 8254 timer/counter support
+ * Copyright (C) 2014 H Hartley Sweeten <hsweeten@visionengravers.com>
+ *
+ * COMEDI - Linux Control and Measurement Device Interface
+ * Copyright (C) 2000 David A. Schleef <ds@schleef.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _COMEDI_8254_H
+#define _COMEDI_8254_H
+
+/*
+ * Common oscillator base values in nanoseconds
+ */
+#define I8254_OSC_BASE_10MHZ 100
+#define I8254_OSC_BASE_5MHZ 200
+#define I8254_OSC_BASE_4MHZ 250
+#define I8254_OSC_BASE_2MHZ 500
+#define I8254_OSC_BASE_1MHZ 1000
+#define I8254_OSC_BASE_100KHZ 10000
+#define I8254_OSC_BASE_10KHZ 100000
+#define I8254_OSC_BASE_1KHZ 1000000
+
+/*
+ * I/O access size used to read/write registers
+ */
+#define I8254_IO8 1
+#define I8254_IO16 2
+#define I8254_IO32 4
+
+/*
+ * Register map for generic 8254 timer (I8254_IO8 with 0 regshift)
+ */
+#define I8254_COUNTER0_REG 0x00
+#define I8254_COUNTER1_REG 0x01
+#define I8254_COUNTER2_REG 0x02
+#define I8254_CTRL_REG 0x03
+#define I8254_CTRL_SEL_CTR(x) ((x) << 6)
+#define I8254_CTRL_READBACK_COUNT ((3 << 6) | (1 << 4))
+#define I8254_CTRL_READBACK_STATUS ((3 << 6) | (1 << 5))
+#define I8254_CTRL_READBACK_SEL_CTR(x) (2 << (x))
+#define I8254_CTRL_LATCH (0 << 4)
+#define I8254_CTRL_LSB_ONLY (1 << 4)
+#define I8254_CTRL_MSB_ONLY (2 << 4)
+#define I8254_CTRL_LSB_MSB (3 << 4)
+
+/* counter maps zero to 0x10000 */
+#define I8254_MAX_COUNT 0x10000
+
+/**
+ * struct comedi_8254 - private data used by this module
+ * @iobase: PIO base address of the registers (in/out)
+ * @mmio: MMIO base address of the registers (read/write)
+ * @iosize: I/O size used to access the registers (b/w/l)
+ * @regshift: register gap shift
+ * @osc_base: cascaded oscillator speed in ns
+ * @divisor: divisor for single counter
+ * @divisor1: divisor loaded into first cascaded counter
+ * @divisor2: divisor loaded into second cascaded counter
+ * #next_div: next divisor for single counter
+ * @next_div1: next divisor to use for first cascaded counter
+ * @next_div2: next divisor to use for second cascaded counter
+ * @busy: flags used to indicate that a counter is "busy"
+ * @insn_config: driver specific (*insn_config) callback
+ */
+struct comedi_8254 {
+ unsigned long iobase;
+ void __iomem *mmio;
+ unsigned int iosize;
+ unsigned int regshift;
+ unsigned int osc_base;
+ unsigned int divisor;
+ unsigned int divisor1;
+ unsigned int divisor2;
+ unsigned int next_div;
+ unsigned int next_div1;
+ unsigned int next_div2;
+ bool busy[3];
+
+ int (*insn_config)(struct comedi_device *, struct comedi_subdevice *s,
+ struct comedi_insn *, unsigned int *data);
+};
+
+unsigned int comedi_8254_status(struct comedi_8254 *, unsigned int counter);
+unsigned int comedi_8254_read(struct comedi_8254 *, unsigned int counter);
+void comedi_8254_write(struct comedi_8254 *,
+ unsigned int counter, unsigned int val);
+
+int comedi_8254_set_mode(struct comedi_8254 *,
+ unsigned int counter, unsigned int mode);
+int comedi_8254_load(struct comedi_8254 *,
+ unsigned int counter, unsigned int val, unsigned int mode);
+
+void comedi_8254_pacer_enable(struct comedi_8254 *,
+ unsigned int counter1, unsigned int counter2,
+ bool enable);
+void comedi_8254_update_divisors(struct comedi_8254 *);
+void comedi_8254_cascade_ns_to_timer(struct comedi_8254 *,
+ unsigned int *nanosec, unsigned int flags);
+void comedi_8254_ns_to_timer(struct comedi_8254 *,
+ unsigned int *nanosec, unsigned int flags);
+
+void comedi_8254_set_busy(struct comedi_8254 *,
+ unsigned int counter, bool busy);
+
+void comedi_8254_subdevice_init(struct comedi_subdevice *,
+ struct comedi_8254 *);
+
+struct comedi_8254 *comedi_8254_init(unsigned long iobase,
+ unsigned int osc_base,
+ unsigned int iosize,
+ unsigned int regshift);
+struct comedi_8254 *comedi_8254_mm_init(void __iomem *mmio,
+ unsigned int osc_base,
+ unsigned int iosize,
+ unsigned int regshift);
+
+#endif /* _COMEDI_8254_H */
projects / karo-tx-linux.git / commitdiff