m68knommu: make 520x FEC platform addressing consistent

If we make all FEC (ethernet) addressing consistent across all ColdFire
family members then we will be able to remove the duplicated plaform data
and use a single setup for all.

So modify the ColdFire 520x FEC addressing so that:

. FECs are numbered from 0 up
. base addresses are absolute (not relative to MBAR peripheral register)
. use a common name for IRQs used

Signed-off-by: Greg Ungerer <gerg@uclinux.org>

diff --git a/arch/m68k/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h
index 41ed4dc8d73624e8393b2eee730166171047ee9d..b83cee2dfdac5d70ee137be29459d9f893400fe4 100644 (file)
--- a/arch/m68k/include/asm/m520xsim.h
+++ b/arch/m68k/include/asm/m520xsim.h
@@ -48,12 +48,19 @@
 #define MCFINT_UART1        27          /* Interrupt number for UART1 */
 #define MCFINT_UART2        28          /* Interrupt number for UART2 */
 #define MCFINT_QSPI         31          /* Interrupt number for QSPI */
+#define MCFINT_FECRX0      36          /* Interrupt number for FEC RX */
+#define MCFINT_FECTX0      40          /* Interrupt number for FEC RX */
+#define MCFINT_FECENTC0            42          /* Interrupt number for FEC RX */
 #define MCFINT_PIT1         4           /* Interrupt number for PIT1 (PIT0 in processor) */
 
 #define MCF_IRQ_UART0      (MCFINT_VECBASE + MCFINT_UART0)
 #define MCF_IRQ_UART1      (MCFINT_VECBASE + MCFINT_UART1)
 #define MCF_IRQ_UART2      (MCFINT_VECBASE + MCFINT_UART2)
 
+#define MCF_IRQ_FECRX0     (MCFINT_VECBASE + MCFINT_FECRX0)
+#define MCF_IRQ_FECTX0     (MCFINT_VECBASE + MCFINT_FECTX0)
+#define MCF_IRQ_FECENTC0    (MCFINT_VECBASE + MCFINT_FECENTC0)
+
 /*
  *  SDRAM configuration registers.
  */
@@ -155,8 +162,8 @@
 /*
  *  FEC module.
  */
-#define        MCFFEC_BASE             0xFC030000      /* Base of FEC ethernet */
-#define        MCFFEC_SIZE             0x800           /* Register set size */
+#define        MCFFEC_BASE0            0xFC030000      /* Base of FEC ethernet */
+#define        MCFFEC_SIZE0            0x800           /* Register set size */
 
 /*
  *  Reset Control Unit.

diff --git a/arch/m68k/platform/520x/config.c b/arch/m68k/platform/520x/config.c
index 3af397262115e1de71a6ba1c185880403d25f994..5111902cb274d3c60e8f3c9d2a201f973dcc4924 100644 (file)
--- a/arch/m68k/platform/520x/config.c
+++ b/arch/m68k/platform/520x/config.c
@@ -27,23 +27,23 @@
 
 static struct resource m520x_fec_resources[] = {
        {
-               .start          = MCFFEC_BASE,
-               .end            = MCFFEC_BASE + MCFFEC_SIZE - 1,
+               .start          = MCFFEC_BASE0,
+               .end            = MCFFEC_BASE0 + MCFFEC_SIZE0 - 1,
                .flags          = IORESOURCE_MEM,
        },
        {
-               .start          = 64 + 36,
-               .end            = 64 + 36,
+               .start          = MCF_IRQ_FEXRX0,
+               .end            = MCF_IRQ_FECRX0,
                .flags          = IORESOURCE_IRQ,
        },
        {
-               .start          = 64 + 40,
-               .end            = 64 + 40,
+               .start          = MCF_IRQ_FECTX0,
+               .end            = MCF_IRQ_FECTX0,
                .flags          = IORESOURCE_IRQ,
        },
        {
-               .start          = 64 + 42,
-               .end            = 64 + 42,
+               .start          = MCF_IRQ_FECENTC0,
+               .end            = MCF_IRQ_FECENTC0,
                .flags          = IORESOURCE_IRQ,
        },
 };