obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o
# Power Management
-obj-$(CONFIG_PM) += pm.o sleep.o
+obj-$(CONFIG_PM) += pm.o sleep.o pm_bus.o
# DSP
obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
#include <linux/input.h>
#include <linux/io.h>
#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/htcpld.h>
+#include <linux/leds.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <plat/board.h>
#include <plat/keypad.h>
#include <plat/usb.h>
+#include <plat/mmc.h>
#include <mach/irqs.h>
#define OMAP_LCDC_CTRL_LCD_EN (1 << 0)
#define OMAP_LCDC_STAT_DONE (1 << 0)
-static struct omap_lcd_config htcherald_lcd_config __initdata = {
- .ctrl_name = "internal",
-};
+/* GPIO definitions for the power button and keyboard slide switch */
+#define HTCHERALD_GPIO_POWER 139
+#define HTCHERALD_GPIO_SLIDE 174
+#define HTCHERALD_GIRQ_BTNS 141
-static struct omap_board_config_kernel htcherald_config[] __initdata = {
- { OMAP_TAG_LCD, &htcherald_lcd_config },
-};
+/* GPIO definitions for the touchscreen */
+#define HTCHERALD_GPIO_TS 76
+
+/* HTCPLD definitions */
+
+/*
+ * CPLD Logic
+ *
+ * Chip 3 - 0x03
+ *
+ * Function 7 6 5 4 3 2 1 0
+ * ------------------------------------
+ * DPAD light x x x x x x x 1
+ * SoundDev x x x x 1 x x x
+ * Screen white 1 x x x x x x x
+ * MMC power on x x x x x 1 x x
+ * Happy times (n) 0 x x x x 1 x x
+ *
+ * Chip 4 - 0x04
+ *
+ * Function 7 6 5 4 3 2 1 0
+ * ------------------------------------
+ * Keyboard light x x x x x x x 1
+ * LCD Bright (4) x x x x x 1 1 x
+ * LCD Bright (3) x x x x x 0 1 x
+ * LCD Bright (2) x x x x x 1 0 x
+ * LCD Bright (1) x x x x x 0 0 x
+ * LCD Off x x x x 0 x x x
+ * LCD image (fb) 1 x x x x x x x
+ * LCD image (white) 0 x x x x x x x
+ * Caps lock LED x x 1 x x x x x
+ *
+ * Chip 5 - 0x05
+ *
+ * Function 7 6 5 4 3 2 1 0
+ * ------------------------------------
+ * Red (solid) x x x x x 1 x x
+ * Red (flash) x x x x x x 1 x
+ * Green (GSM flash) x x x x 1 x x x
+ * Green (GSM solid) x x x 1 x x x x
+ * Green (wifi flash) x x 1 x x x x x
+ * Blue (bt flash) x 1 x x x x x x
+ * DPAD Int Enable 1 x x x x x x 0
+ *
+ * (Combinations of the above can be made for different colors.)
+ * The direction pad interrupt enable must be set each time the
+ * interrupt is handled.
+ *
+ * Chip 6 - 0x06
+ *
+ * Function 7 6 5 4 3 2 1 0
+ * ------------------------------------
+ * Vibrator x x x x 1 x x x
+ * Alt LED x x x 1 x x x x
+ * Screen white 1 x x x x x x x
+ * Screen white x x 1 x x x x x
+ * Screen white x 0 x x x x x x
+ * Enable kbd dpad x x x x x x 0 x
+ * Happy Times 0 1 0 x x x 0 x
+ */
+
+/*
+ * HTCPLD GPIO lines start 16 after OMAP_MAX_GPIO_LINES to account
+ * for the 16 MPUIO lines.
+ */
+#define HTCPLD_GPIO_START_OFFSET (OMAP_MAX_GPIO_LINES + 16)
+#define HTCPLD_IRQ(chip, offset) (OMAP_IRQ_END + 8 * (chip) + (offset))
+#define HTCPLD_BASE(chip, offset) \
+ (HTCPLD_GPIO_START_OFFSET + 8 * (chip) + (offset))
+
+#define HTCPLD_GPIO_LED_DPAD HTCPLD_BASE(0, 0)
+#define HTCPLD_GPIO_LED_KBD HTCPLD_BASE(1, 0)
+#define HTCPLD_GPIO_LED_CAPS HTCPLD_BASE(1, 5)
+#define HTCPLD_GPIO_LED_RED_FLASH HTCPLD_BASE(2, 1)
+#define HTCPLD_GPIO_LED_RED_SOLID HTCPLD_BASE(2, 2)
+#define HTCPLD_GPIO_LED_GREEN_FLASH HTCPLD_BASE(2, 3)
+#define HTCPLD_GPIO_LED_GREEN_SOLID HTCPLD_BASE(2, 4)
+#define HTCPLD_GPIO_LED_WIFI HTCPLD_BASE(2, 5)
+#define HTCPLD_GPIO_LED_BT HTCPLD_BASE(2, 6)
+#define HTCPLD_GPIO_LED_VIBRATE HTCPLD_BASE(3, 3)
+#define HTCPLD_GPIO_LED_ALT HTCPLD_BASE(3, 4)
+
+#define HTCPLD_GPIO_RIGHT_KBD HTCPLD_BASE(6, 7)
+#define HTCPLD_GPIO_UP_KBD HTCPLD_BASE(6, 6)
+#define HTCPLD_GPIO_LEFT_KBD HTCPLD_BASE(6, 5)
+#define HTCPLD_GPIO_DOWN_KBD HTCPLD_BASE(6, 4)
+
+#define HTCPLD_GPIO_RIGHT_DPAD HTCPLD_BASE(7, 7)
+#define HTCPLD_GPIO_UP_DPAD HTCPLD_BASE(7, 6)
+#define HTCPLD_GPIO_LEFT_DPAD HTCPLD_BASE(7, 5)
+#define HTCPLD_GPIO_DOWN_DPAD HTCPLD_BASE(7, 4)
+#define HTCPLD_GPIO_ENTER_DPAD HTCPLD_BASE(7, 3)
+
+/*
+ * The htcpld chip requires a gpio write to a specific line
+ * to re-enable interrupts after one has occurred.
+ */
+#define HTCPLD_GPIO_INT_RESET_HI HTCPLD_BASE(2, 7)
+#define HTCPLD_GPIO_INT_RESET_LO HTCPLD_BASE(2, 0)
+
+/* Chip 5 */
+#define HTCPLD_IRQ_RIGHT_KBD HTCPLD_IRQ(0, 7)
+#define HTCPLD_IRQ_UP_KBD HTCPLD_IRQ(0, 6)
+#define HTCPLD_IRQ_LEFT_KBD HTCPLD_IRQ(0, 5)
+#define HTCPLD_IRQ_DOWN_KBD HTCPLD_IRQ(0, 4)
+
+/* Chip 6 */
+#define HTCPLD_IRQ_RIGHT_DPAD HTCPLD_IRQ(1, 7)
+#define HTCPLD_IRQ_UP_DPAD HTCPLD_IRQ(1, 6)
+#define HTCPLD_IRQ_LEFT_DPAD HTCPLD_IRQ(1, 5)
+#define HTCPLD_IRQ_DOWN_DPAD HTCPLD_IRQ(1, 4)
+#define HTCPLD_IRQ_ENTER_DPAD HTCPLD_IRQ(1, 3)
/* Keyboard definition */
.resource = kp_resources,
};
+/* GPIO buttons for keyboard slide and power button */
+static struct gpio_keys_button herald_gpio_keys_table[] = {
+ {BTN_0, HTCHERALD_GPIO_POWER, 1, "POWER", EV_KEY, 1, 20},
+ {SW_LID, HTCHERALD_GPIO_SLIDE, 0, "SLIDE", EV_SW, 1, 20},
+
+ {KEY_LEFT, HTCPLD_GPIO_LEFT_KBD, 1, "LEFT", EV_KEY, 1, 20},
+ {KEY_RIGHT, HTCPLD_GPIO_RIGHT_KBD, 1, "RIGHT", EV_KEY, 1, 20},
+ {KEY_UP, HTCPLD_GPIO_UP_KBD, 1, "UP", EV_KEY, 1, 20},
+ {KEY_DOWN, HTCPLD_GPIO_DOWN_KBD, 1, "DOWN", EV_KEY, 1, 20},
+
+ {KEY_LEFT, HTCPLD_GPIO_LEFT_DPAD, 1, "DLEFT", EV_KEY, 1, 20},
+ {KEY_RIGHT, HTCPLD_GPIO_RIGHT_DPAD, 1, "DRIGHT", EV_KEY, 1, 20},
+ {KEY_UP, HTCPLD_GPIO_UP_DPAD, 1, "DUP", EV_KEY, 1, 20},
+ {KEY_DOWN, HTCPLD_GPIO_DOWN_DPAD, 1, "DDOWN", EV_KEY, 1, 20},
+ {KEY_ENTER, HTCPLD_GPIO_ENTER_DPAD, 1, "DENTER", EV_KEY, 1, 20},
+};
+
+static struct gpio_keys_platform_data herald_gpio_keys_data = {
+ .buttons = herald_gpio_keys_table,
+ .nbuttons = ARRAY_SIZE(herald_gpio_keys_table),
+ .rep = 1,
+};
+
+static struct platform_device herald_gpiokeys_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &herald_gpio_keys_data,
+ },
+};
+
+/* LEDs for the Herald. These connect to the HTCPLD GPIO device. */
+static struct gpio_led gpio_leds[] = {
+ {"dpad", NULL, HTCPLD_GPIO_LED_DPAD, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+ {"kbd", NULL, HTCPLD_GPIO_LED_KBD, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+ {"vibrate", NULL, HTCPLD_GPIO_LED_VIBRATE, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+ {"green_solid", NULL, HTCPLD_GPIO_LED_GREEN_SOLID, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+ {"green_flash", NULL, HTCPLD_GPIO_LED_GREEN_FLASH, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+ {"red_solid", "mmc0", HTCPLD_GPIO_LED_RED_SOLID, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+ {"red_flash", NULL, HTCPLD_GPIO_LED_RED_FLASH, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+ {"wifi", NULL, HTCPLD_GPIO_LED_WIFI, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+ {"bt", NULL, HTCPLD_GPIO_LED_BT, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+ {"caps", NULL, HTCPLD_GPIO_LED_CAPS, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+ {"alt", NULL, HTCPLD_GPIO_LED_ALT, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+};
+
+static struct gpio_led_platform_data gpio_leds_data = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device gpio_leds_device = {
+ .name = "leds-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &gpio_leds_data,
+ },
+};
+
+/* HTC PLD chips */
+
+static struct resource htcpld_resources[] = {
+ [0] = {
+ .start = OMAP_GPIO_IRQ(HTCHERALD_GIRQ_BTNS),
+ .end = OMAP_GPIO_IRQ(HTCHERALD_GIRQ_BTNS),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct htcpld_chip_platform_data htcpld_chips[] = {
+ [0] = {
+ .addr = 0x03,
+ .reset = 0x04,
+ .num_gpios = 8,
+ .gpio_out_base = HTCPLD_BASE(0, 0),
+ .gpio_in_base = HTCPLD_BASE(4, 0),
+ },
+ [1] = {
+ .addr = 0x04,
+ .reset = 0x8e,
+ .num_gpios = 8,
+ .gpio_out_base = HTCPLD_BASE(1, 0),
+ .gpio_in_base = HTCPLD_BASE(5, 0),
+ },
+ [2] = {
+ .addr = 0x05,
+ .reset = 0x80,
+ .num_gpios = 8,
+ .gpio_out_base = HTCPLD_BASE(2, 0),
+ .gpio_in_base = HTCPLD_BASE(6, 0),
+ .irq_base = HTCPLD_IRQ(0, 0),
+ .num_irqs = 8,
+ },
+ [3] = {
+ .addr = 0x06,
+ .reset = 0x40,
+ .num_gpios = 8,
+ .gpio_out_base = HTCPLD_BASE(3, 0),
+ .gpio_in_base = HTCPLD_BASE(7, 0),
+ .irq_base = HTCPLD_IRQ(1, 0),
+ .num_irqs = 8,
+ },
+};
+
+struct htcpld_core_platform_data htcpld_pfdata = {
+ .int_reset_gpio_hi = HTCPLD_GPIO_INT_RESET_HI,
+ .int_reset_gpio_lo = HTCPLD_GPIO_INT_RESET_LO,
+ .i2c_adapter_id = 1,
+
+ .chip = htcpld_chips,
+ .num_chip = ARRAY_SIZE(htcpld_chips),
+};
+
+static struct platform_device htcpld_device = {
+ .name = "i2c-htcpld",
+ .id = -1,
+ .resource = htcpld_resources,
+ .num_resources = ARRAY_SIZE(htcpld_resources),
+ .dev = {
+ .platform_data = &htcpld_pfdata,
+ },
+};
+
/* USB Device */
static struct omap_usb_config htcherald_usb_config __initdata = {
.otg = 0,
};
/* LCD Device resources */
+static struct omap_lcd_config htcherald_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
+
+static struct omap_board_config_kernel htcherald_config[] __initdata = {
+ { OMAP_TAG_LCD, &htcherald_lcd_config },
+};
+
static struct platform_device lcd_device = {
.name = "lcd_htcherald",
.id = -1,
};
+/* MMC Card */
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+static struct omap_mmc_platform_data htc_mmc1_data = {
+ .nr_slots = 1,
+ .switch_slot = NULL,
+ .slots[0] = {
+ .ocr_mask = MMC_VDD_28_29 | MMC_VDD_30_31 |
+ MMC_VDD_32_33 | MMC_VDD_33_34,
+ .name = "mmcblk",
+ .nomux = 1,
+ .wires = 4,
+ .switch_pin = -1,
+ },
+};
+
+static struct omap_mmc_platform_data *htc_mmc_data[1];
+#endif
+
+
+/* Platform devices for the Herald */
static struct platform_device *devices[] __initdata = {
&kp_device,
&lcd_device,
+ &htcpld_device,
+ &gpio_leds_device,
+ &herald_gpiokeys_device,
+};
+
+/*
+ * Touchscreen
+ */
+static const struct ads7846_platform_data htcherald_ts_platform_data = {
+ .model = 7846,
+ .keep_vref_on = 1,
+ .x_plate_ohms = 496,
+ .gpio_pendown = HTCHERALD_GPIO_TS,
+ .pressure_max = 100000,
+ .pressure_min = 5000,
+ .x_min = 528,
+ .x_max = 3760,
+ .y_min = 624,
+ .y_max = 3760,
+};
+
+static struct spi_board_info __initdata htcherald_spi_board_info[] = {
+ {
+ .modalias = "ads7846",
+ .platform_data = &htcherald_ts_platform_data,
+ .irq = OMAP_GPIO_IRQ(HTCHERALD_GPIO_TS),
+ .max_speed_hz = 2500000,
+ .bus_num = 2,
+ .chip_select = 1,
+ }
};
/*
{
printk(KERN_INFO "HTC Herald init.\n");
+ /* Do board initialization before we register all the devices */
omap_gpio_init();
omap_board_config = htcherald_config;
htcherald_usb_enable();
omap1_usb_init(&htcherald_usb_config);
+
+ spi_register_board_info(htcherald_spi_board_info,
+ ARRAY_SIZE(htcherald_spi_board_info));
+
+ omap_register_i2c_bus(1, 100, NULL, 0);
+
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+ htc_mmc_data[0] = &htc_mmc1_data;
+ omap1_init_mmc(htc_mmc_data, 1);
+#endif
}
static void __init htcherald_init_irq(void)
--- /dev/null
+/*
+ * Runtime PM support code for OMAP1
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/pm_runtime.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <plat/omap_device.h>
+#include <plat/omap-pm.h>
+
+#ifdef CONFIG_PM_RUNTIME
+static int omap1_pm_runtime_suspend(struct device *dev)
+{
+ struct clk *iclk, *fclk;
+ int ret = 0;
+
+ dev_dbg(dev, "%s\n", __func__);
+
+ ret = pm_generic_runtime_suspend(dev);
+
+ fclk = clk_get(dev, "fck");
+ if (!IS_ERR(fclk)) {
+ clk_disable(fclk);
+ clk_put(fclk);
+ }
+
+ iclk = clk_get(dev, "ick");
+ if (!IS_ERR(iclk)) {
+ clk_disable(iclk);
+ clk_put(iclk);
+ }
+
+ return 0;
+};
+
+static int omap1_pm_runtime_resume(struct device *dev)
+{
+ int ret = 0;
+ struct clk *iclk, *fclk;
+
+ dev_dbg(dev, "%s\n", __func__);
+
+ iclk = clk_get(dev, "ick");
+ if (!IS_ERR(iclk)) {
+ clk_enable(iclk);
+ clk_put(iclk);
+ }
+
+ fclk = clk_get(dev, "fck");
+ if (!IS_ERR(fclk)) {
+ clk_enable(fclk);
+ clk_put(fclk);
+ }
+
+ return pm_generic_runtime_resume(dev);
+};
+
+static int __init omap1_pm_runtime_init(void)
+{
+ const struct dev_pm_ops *pm;
+ struct dev_pm_ops *omap_pm;
+
+ pm = platform_bus_get_pm_ops();
+ if (!pm) {
+ pr_err("%s: unable to get dev_pm_ops from platform_bus\n",
+ __func__);
+ return -ENODEV;
+ }
+
+ omap_pm = kmemdup(pm, sizeof(struct dev_pm_ops), GFP_KERNEL);
+ if (!omap_pm) {
+ pr_err("%s: unable to alloc memory for new dev_pm_ops\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ omap_pm->runtime_suspend = omap1_pm_runtime_suspend;
+ omap_pm->runtime_resume = omap1_pm_runtime_resume;
+
+ platform_bus_set_pm_ops(omap_pm);
+
+ return 0;
+}
+core_initcall(omap1_pm_runtime_init);
+#endif /* CONFIG_PM_RUNTIME */
# Power Management
ifeq ($(CONFIG_PM),y)
obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
-obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o
-obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o cpuidle34xx.o
-obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o
+obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o pm_bus.o
+obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o cpuidle34xx.o pm_bus.o
+obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o pm_bus.o
obj-$(CONFIG_PM_DEBUG) += pm-debug.o
AFLAGS_sleep24xx.o :=-Wa,-march=armv6
AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a
+ifeq ($(CONFIG_PM_VERBOSE),y)
+CFLAGS_pm_bus.o += -DDEBUG
+endif
+
endif
# PRCM
obj-$(CONFIG_ARCH_OMAP2420) += omap_hwmod_2420_data.o
obj-$(CONFIG_ARCH_OMAP2430) += omap_hwmod_2430_data.o
obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_3xxx_data.o
+obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o
# EMU peripherals
obj-$(CONFIG_OMAP3_EMU) += emu.o
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
+#include <linux/mmc/host.h>
#include <linux/delay.h>
#include <linux/i2c/twl.h>
#include <linux/err.h>
static struct omap2_hsmmc_info mmc[] __initdata = {
{
.mmc = 1,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.ext_clock = 1,
#include <linux/regulator/machine.h>
#include <linux/io.h>
#include <linux/gpio.h>
+#include <linux/mmc/host.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
/* 8 bits (default) requires S6.3 == ON,
* so the SIM card isn't used; else 4 bits.
*/
- .wires = 8,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = 4,
},
{
.mmc = 2,
- .wires = 8,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = 7,
},
{} /* Terminator */
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
- .wires = 8,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = -EINVAL,
},
{
.mmc = 2,
- .wires = 8,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.nonremovable = true,
#include <linux/i2c/at24.h>
#include <linux/i2c/twl.h>
#include <linux/regulator/machine.h>
+#include <linux/mmc/host.h>
#include <linux/spi/spi.h>
#include <linux/spi/tdo24m.h>
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
},
{
.mmc = 2,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.transceiver = 1,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
+#include <linux/mmc/host.h>
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
- .wires = 8,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = 29,
},
{} /* Terminator */
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
+#include <linux/mmc/host.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
},
{
.mmc = 2,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
},
#include <linux/i2c/twl.h>
#include <linux/io.h>
#include <linux/smsc911x.h>
+#include <linux/mmc/host.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
static struct omap2_hsmmc_info mmc[] __initdata = {
{
.mmc = 1,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
},
#include <linux/i2c.h>
#include <linux/spi/spi.h>
#include <linux/usb/musb.h>
+#include <sound/tlv320aic3x.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
.max_freq = 24000000,
.dma_mask = 0xffffffff,
.slots[0] = {
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.set_power = n8x0_mmc_set_power,
.set_bus_mode = n8x0_mmc_set_bus_mode,
.get_cover_state = n8x0_mmc_get_cover_state,
return 0;
}
-static struct i2c_board_info __initdata n8x0_i2c_board_info_1[] = {
+#else
+static int n8x0_menelaus_late_init(struct device *dev)
+{
+ return 0;
+}
+#endif
+
+static struct menelaus_platform_data n8x0_menelaus_platform_data __initdata = {
+ .late_init = n8x0_menelaus_late_init,
+};
+
+static struct i2c_board_info __initdata n8x0_i2c_board_info_1[] __initdata = {
{
I2C_BOARD_INFO("menelaus", 0x72),
.irq = INT_24XX_SYS_NIRQ,
+ .platform_data = &n8x0_menelaus_platform_data,
},
};
-static struct menelaus_platform_data n8x0_menelaus_platform_data = {
- .late_init = n8x0_menelaus_late_init,
+static struct aic3x_pdata n810_aic33_data __initdata = {
+ .gpio_reset = 118,
};
-static void __init n8x0_menelaus_init(void)
-{
- n8x0_i2c_board_info_1[0].platform_data = &n8x0_menelaus_platform_data;
- omap_register_i2c_bus(1, 400, n8x0_i2c_board_info_1,
- ARRAY_SIZE(n8x0_i2c_board_info_1));
-}
-
-#else
-static inline void __init n8x0_menelaus_init(void)
-{
-}
-#endif
+static struct i2c_board_info n810_i2c_board_info_2[] __initdata = {
+ {
+ I2C_BOARD_INFO("tlv320aic3x", 0x18),
+ .platform_data = &n810_aic33_data,
+ },
+};
static void __init n8x0_map_io(void)
{
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
+ /* I2S codec port pins for McBSP block */
+ OMAP2420_MUX(EAC_AC_SCLK, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+ OMAP2420_MUX(EAC_AC_FS, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+ OMAP2420_MUX(EAC_AC_DIN, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+ OMAP2420_MUX(EAC_AC_DOUT, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
/* FIXME: add n810 spi devices */
spi_register_board_info(n800_spi_board_info,
ARRAY_SIZE(n800_spi_board_info));
+ omap_register_i2c_bus(1, 400, n8x0_i2c_board_info_1,
+ ARRAY_SIZE(n8x0_i2c_board_info_1));
+ omap_register_i2c_bus(2, 400, NULL, 0);
+ if (machine_is_nokia_n810())
+ i2c_register_board_info(2, n810_i2c_board_info_2,
+ ARRAY_SIZE(n810_i2c_board_info_2));
omap_serial_init();
- n8x0_menelaus_init();
n8x0_onenand_init();
n8x0_mmc_init();
n8x0_usb_init();
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
+#include <linux/mmc/host.h>
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
- .wires = 8,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = 29,
},
{} /* Terminator */
#include <linux/smsc911x.h>
#include <linux/regulator/machine.h>
+#include <linux/mmc/host.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = 63,
},
#include <linux/input.h>
#include <linux/input/matrix_keypad.h>
#include <linux/gpio_keys.h>
+#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
#include <asm/mach-types.h>
static struct omap2_hsmmc_info omap3pandora_mmc[] = {
{
.mmc = 1,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = 126,
.ext_clock = 0,
},
{
.mmc = 2,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = 127,
.ext_clock = 1,
},
{
.mmc = 3,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.init_card = pandora_wl1251_init_card,
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
+#include <linux/mmc/host.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = 23,
},
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
+#include <linux/mmc/host.h>
#include <plat/mcspi.h>
#include <linux/spi/spi.h>
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
- .wires = 8,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = 29,
},
{} /* Terminator */
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
- .wires = 8,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = -EINVAL,
},
{} /* Terminator */
}
static void __init omap4_panda_init(void)
{
- int status;
-
omap4_panda_i2c_init();
omap_serial_init();
omap4_twl6030_hsmmc_init(mmc);
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
+#include <linux/mmc/host.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
},
{
.mmc = 2,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.transceiver = true,
{
.name = "external",
.mmc = 1,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.cover_only = true,
.gpio_cd = 160,
.gpio_wp = -EINVAL,
{
.name = "internal",
.mmc = 2,
- .wires = 8, /* See also rx51_mmc2_remux */
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
+ /* See also rx51_mmc2_remux */
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.nonremovable = true,
#include <linux/gpio.h>
#include <linux/i2c/twl.h>
#include <linux/regulator/machine.h>
+#include <linux/mmc/host.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
{
.name = "external",
.mmc = 1,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.gpio_wp = -EINVAL,
.power_saving = true,
},
{
.name = "internal",
.mmc = 2,
- .wires = 8,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.nonremovable = true,
CLK(NULL, "des_ick", &des_ick, CK_242X),
CLK("omap-sham", "ick", &sha_ick, CK_242X),
CLK("omap_rng", "ick", &rng_ick, CK_242X),
- CLK(NULL, "aes_ick", &aes_ick, CK_242X),
+ CLK("omap-aes", "ick", &aes_ick, CK_242X),
CLK(NULL, "pka_ick", &pka_ick, CK_242X),
CLK(NULL, "usb_fck", &usb_fck, CK_242X),
CLK("musb_hdrc", "fck", &osc_ck, CK_242X),
CLK(NULL, "des_ick", &des_ick, CK_243X),
CLK("omap-sham", "ick", &sha_ick, CK_243X),
CLK("omap_rng", "ick", &rng_ick, CK_243X),
- CLK(NULL, "aes_ick", &aes_ick, CK_243X),
+ CLK("omap-aes", "ick", &aes_ick, CK_243X),
CLK(NULL, "pka_ick", &pka_ick, CK_243X),
CLK(NULL, "usb_fck", &usb_fck, CK_243X),
CLK("musb_hdrc", "ick", &usbhs_ick, CK_243X),
CLK(NULL, "usbtll_ick", &usbtll_ick, CK_3430ES2 | CK_AM35XX),
CLK("mmci-omap-hs.2", "ick", &mmchs3_ick, CK_3430ES2 | CK_AM35XX),
CLK(NULL, "icr_ick", &icr_ick, CK_343X),
- CLK(NULL, "aes2_ick", &aes2_ick, CK_343X),
+ CLK("omap-aes", "ick", &aes2_ick, CK_343X),
CLK("omap-sham", "ick", &sha12_ick, CK_343X),
CLK(NULL, "des2_ick", &des2_ick, CK_343X),
CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_3XXX),
}
-/**
- * _init_wkdep_usecount - initialize wkdep usecounts to match hardware
- * @clkdm: clockdomain to initialize wkdep usecounts
- *
- * Initialize the wakeup dependency usecount variables for clockdomain @clkdm.
- * If a wakeup dependency is present in the hardware, the usecount will be
- * set to 1; otherwise, it will be set to 0. Software should clear all
- * software wakeup dependencies prior to calling this function if it wishes
- * to ensure that all usecounts start at 0. No return value.
- */
-static void _init_wkdep_usecount(struct clockdomain *clkdm)
-{
- u32 v;
- struct clkdm_dep *cd;
-
- if (!clkdm->wkdep_srcs)
- return;
-
- for (cd = clkdm->wkdep_srcs; cd->clkdm_name; cd++) {
- if (!omap_chip_is(cd->omap_chip))
- continue;
-
- if (!cd->clkdm && cd->clkdm_name)
- cd->clkdm = _clkdm_lookup(cd->clkdm_name);
-
- if (!cd->clkdm) {
- WARN(!cd->clkdm, "clockdomain: %s: wkdep clkdm %s not "
- "found\n", clkdm->name, cd->clkdm_name);
- continue;
- }
-
- v = prm_read_mod_bits_shift(clkdm->pwrdm.ptr->prcm_offs,
- PM_WKDEP,
- (1 << cd->clkdm->dep_bit));
-
- if (v)
- pr_debug("clockdomain: %s: wakeup dependency already "
- "set to wake up when %s wakes\n",
- clkdm->name, cd->clkdm->name);
-
- atomic_set(&cd->wkdep_usecount, (v) ? 1 : 0);
- }
-}
-
-/**
- * _init_sleepdep_usecount - initialize sleepdep usecounts to match hardware
- * @clkdm: clockdomain to initialize sleepdep usecounts
- *
- * Initialize the sleep dependency usecount variables for clockdomain @clkdm.
- * If a sleep dependency is present in the hardware, the usecount will be
- * set to 1; otherwise, it will be set to 0. Software should clear all
- * software sleep dependencies prior to calling this function if it wishes
- * to ensure that all usecounts start at 0. No return value.
- */
-static void _init_sleepdep_usecount(struct clockdomain *clkdm)
-{
- u32 v;
- struct clkdm_dep *cd;
-
- if (!cpu_is_omap34xx())
- return;
-
- if (!clkdm->sleepdep_srcs)
- return;
-
- for (cd = clkdm->sleepdep_srcs; cd->clkdm_name; cd++) {
- if (!omap_chip_is(cd->omap_chip))
- continue;
-
- if (!cd->clkdm && cd->clkdm_name)
- cd->clkdm = _clkdm_lookup(cd->clkdm_name);
-
- if (!cd->clkdm) {
- WARN(!cd->clkdm, "clockdomain: %s: sleepdep clkdm %s "
- "not found\n", clkdm->name, cd->clkdm_name);
- continue;
- }
-
- v = prm_read_mod_bits_shift(clkdm->pwrdm.ptr->prcm_offs,
- OMAP3430_CM_SLEEPDEP,
- (1 << cd->clkdm->dep_bit));
-
- if (v)
- pr_debug("clockdomain: %s: sleep dependency already "
- "set to prevent from idling until %s "
- "idles\n", clkdm->name, cd->clkdm->name);
-
- atomic_set(&cd->sleepdep_usecount, (v) ? 1 : 0);
- }
-};
-
/* Public functions */
/**
_autodep_lookup(autodep);
/*
- * Ensure that the *dep_usecount registers reflect the current
- * state of the PRCM.
+ * Put all clockdomains into software-supervised mode; PM code
+ * should later enable hardware-supervised mode as appropriate
*/
list_for_each_entry(clkdm, &clkdm_list, node) {
- _init_wkdep_usecount(clkdm);
- _init_sleepdep_usecount(clkdm);
+ if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+ omap2_clkdm_wakeup(clkdm);
+ else if (clkdm->flags & CLKDM_CAN_DISABLE_AUTO)
+ omap2_clkdm_deny_idle(clkdm);
+
+ clkdm_clear_all_wkdeps(clkdm);
+ clkdm_clear_all_sleepdeps(clkdm);
}
}
if (!omap_chip_is(cd->omap_chip))
continue;
+ if (!cd->clkdm && cd->clkdm_name)
+ cd->clkdm = _clkdm_lookup(cd->clkdm_name);
+
/* PRM accesses are slow, so minimize them */
mask |= 1 << cd->clkdm->dep_bit;
atomic_set(&cd->wkdep_usecount, 0);
if (!omap_chip_is(cd->omap_chip))
continue;
+ if (!cd->clkdm && cd->clkdm_name)
+ cd->clkdm = _clkdm_lookup(cd->clkdm_name);
+
/* PRM accesses are slow, so minimize them */
mask |= 1 << cd->clkdm->dep_bit;
atomic_set(&cd->sleepdep_usecount, 0);
struct omap3_processor_cx omap3_power_states[OMAP3_MAX_STATES];
struct omap3_processor_cx current_cx_state;
-struct powerdomain *mpu_pd, *core_pd;
+struct powerdomain *mpu_pd, *core_pd, *per_pd;
+struct powerdomain *cam_pd;
/*
* The latencies/thresholds for various C states have
struct cpuidle_state *state)
{
struct cpuidle_state *new_state = next_valid_state(dev, state);
+ u32 core_next_state, per_next_state = 0, per_saved_state = 0;
+ u32 cam_state;
+ struct omap3_processor_cx *cx;
+ int ret;
if ((state->flags & CPUIDLE_FLAG_CHECK_BM) && omap3_idle_bm_check()) {
BUG_ON(!dev->safe_state);
new_state = dev->safe_state;
+ goto select_state;
+ }
+
+ cx = cpuidle_get_statedata(state);
+ core_next_state = cx->core_state;
+
+ /*
+ * FIXME: we currently manage device-specific idle states
+ * for PER and CORE in combination with CPU-specific
+ * idle states. This is wrong, and device-specific
+ * idle managment needs to be separated out into
+ * its own code.
+ */
+
+ /*
+ * Prevent idle completely if CAM is active.
+ * CAM does not have wakeup capability in OMAP3.
+ */
+ cam_state = pwrdm_read_pwrst(cam_pd);
+ if (cam_state == PWRDM_POWER_ON) {
+ new_state = dev->safe_state;
+ goto select_state;
+ }
+
+ /*
+ * Prevent PER off if CORE is not in retention or off as this
+ * would disable PER wakeups completely.
+ */
+ per_next_state = per_saved_state = pwrdm_read_next_pwrst(per_pd);
+ if ((per_next_state == PWRDM_POWER_OFF) &&
+ (core_next_state > PWRDM_POWER_RET)) {
+ per_next_state = PWRDM_POWER_RET;
+ pwrdm_set_next_pwrst(per_pd, per_next_state);
}
+ /* Are we changing PER target state? */
+ if (per_next_state != per_saved_state)
+ pwrdm_set_next_pwrst(per_pd, per_next_state);
+
+select_state:
dev->last_state = new_state;
- return omap3_enter_idle(dev, new_state);
+ ret = omap3_enter_idle(dev, new_state);
+
+ /* Restore original PER state if it was modified */
+ if (per_next_state != per_saved_state)
+ pwrdm_set_next_pwrst(per_pd, per_saved_state);
+
+ return ret;
}
DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev);
cpuidle_params_table[OMAP3_STATE_C2].threshold;
omap3_power_states[OMAP3_STATE_C2].mpu_state = PWRDM_POWER_ON;
omap3_power_states[OMAP3_STATE_C2].core_state = PWRDM_POWER_ON;
- omap3_power_states[OMAP3_STATE_C2].flags = CPUIDLE_FLAG_TIME_VALID;
+ omap3_power_states[OMAP3_STATE_C2].flags = CPUIDLE_FLAG_TIME_VALID |
+ CPUIDLE_FLAG_CHECK_BM;
/* C3 . MPU CSWR + Core inactive */
omap3_power_states[OMAP3_STATE_C3].valid =
mpu_pd = pwrdm_lookup("mpu_pwrdm");
core_pd = pwrdm_lookup("core_pwrdm");
+ per_pd = pwrdm_lookup("per_pwrdm");
+ cam_pd = pwrdm_lookup("cam_pwrdm");
omap_init_power_states();
cpuidle_register_driver(&omap3_idle_driver);
static inline void omap_init_sham(void) { }
#endif
+#if defined(CONFIG_CRYPTO_DEV_OMAP_AES) || defined(CONFIG_CRYPTO_DEV_OMAP_AES_MODULE)
+
+#ifdef CONFIG_ARCH_OMAP2
+static struct resource omap2_aes_resources[] = {
+ {
+ .start = OMAP24XX_SEC_AES_BASE,
+ .end = OMAP24XX_SEC_AES_BASE + 0x4C,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = OMAP24XX_DMA_AES_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ {
+ .start = OMAP24XX_DMA_AES_RX,
+ .flags = IORESOURCE_DMA,
+ }
+};
+static int omap2_aes_resources_sz = ARRAY_SIZE(omap2_aes_resources);
+#else
+#define omap2_aes_resources NULL
+#define omap2_aes_resources_sz 0
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+static struct resource omap3_aes_resources[] = {
+ {
+ .start = OMAP34XX_SEC_AES_BASE,
+ .end = OMAP34XX_SEC_AES_BASE + 0x4C,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = OMAP34XX_DMA_AES2_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ {
+ .start = OMAP34XX_DMA_AES2_RX,
+ .flags = IORESOURCE_DMA,
+ }
+};
+static int omap3_aes_resources_sz = ARRAY_SIZE(omap3_aes_resources);
+#else
+#define omap3_aes_resources NULL
+#define omap3_aes_resources_sz 0
+#endif
+
+static struct platform_device aes_device = {
+ .name = "omap-aes",
+ .id = -1,
+};
+
+static void omap_init_aes(void)
+{
+ if (cpu_is_omap24xx()) {
+ aes_device.resource = omap2_aes_resources;
+ aes_device.num_resources = omap2_aes_resources_sz;
+ } else if (cpu_is_omap34xx()) {
+ aes_device.resource = omap3_aes_resources;
+ aes_device.num_resources = omap3_aes_resources_sz;
+ } else {
+ pr_err("%s: platform not supported\n", __func__);
+ return;
+ }
+ platform_device_register(&aes_device);
+}
+
+#else
+static inline void omap_init_aes(void) { }
+#endif
+
/*-------------------------------------------------------------------------*/
#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
omap_mux_init_signal("sdmmc_dat0", 0);
omap_mux_init_signal("sdmmc_dat_dir0", 0);
omap_mux_init_signal("sdmmc_cmd_dir", 0);
- if (mmc_controller->slots[0].wires == 4) {
+ if (mmc_controller->slots[0].caps & MMC_CAP_4_BIT_DATA) {
omap_mux_init_signal("sdmmc_dat1", 0);
omap_mux_init_signal("sdmmc_dat2", 0);
omap_mux_init_signal("sdmmc_dat3", 0);
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc1_dat0",
OMAP_PIN_INPUT_PULLUP);
- if (mmc_controller->slots[0].wires == 4 ||
- mmc_controller->slots[0].wires == 8) {
+ if (mmc_controller->slots[0].caps &
+ (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
omap_mux_init_signal("sdmmc1_dat1",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc1_dat2",
omap_mux_init_signal("sdmmc1_dat3",
OMAP_PIN_INPUT_PULLUP);
}
- if (mmc_controller->slots[0].wires == 8) {
+ if (mmc_controller->slots[0].caps &
+ MMC_CAP_8_BIT_DATA) {
omap_mux_init_signal("sdmmc1_dat4",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc1_dat5",
* For 8 wire configurations, Lines DAT4, 5, 6 and 7 need to be muxed
* in the board-*.c files
*/
- if (mmc_controller->slots[0].wires == 4 ||
- mmc_controller->slots[0].wires == 8) {
+ if (mmc_controller->slots[0].caps &
+ (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
omap_mux_init_signal("sdmmc2_dat1",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc2_dat2",
omap_mux_init_signal("sdmmc2_dat3",
OMAP_PIN_INPUT_PULLUP);
}
- if (mmc_controller->slots[0].wires == 8) {
+ if (mmc_controller->slots[0].caps &
+ MMC_CAP_8_BIT_DATA) {
omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc2_dat5.sdmmc2_dat5",
omap_hdq_init();
omap_init_sti();
omap_init_sham();
+ omap_init_aes();
omap_init_vout();
return 0;
"mmc%islot%i", c->mmc, 1);
mmc->slots[0].name = hc->name;
mmc->nr_slots = 1;
- mmc->slots[0].wires = c->wires;
+ mmc->slots[0].caps = c->caps;
mmc->slots[0].internal_clock = !c->ext_clock;
mmc->dma_mask = 0xffffffff;
}
/* Omap3630 HSMMC1 supports only 4-bit */
- if (cpu_is_omap3630() && c->wires > 4) {
- c->wires = 4;
- mmc->slots[0].wires = c->wires;
+ if (cpu_is_omap3630() &&
+ (c->caps & MMC_CAP_8_BIT_DATA)) {
+ c->caps &= ~MMC_CAP_8_BIT_DATA;
+ c->caps |= MMC_CAP_4_BIT_DATA;
+ mmc->slots[0].caps = c->caps;
}
break;
case 2:
if (c->ext_clock)
c->transceiver = 1;
- if (c->transceiver && c->wires > 4)
- c->wires = 4;
+ if (c->transceiver && (c->caps & MMC_CAP_8_BIT_DATA)) {
+ c->caps &= ~MMC_CAP_8_BIT_DATA;
+ c->caps |= MMC_CAP_4_BIT_DATA;
+ }
/* FALLTHROUGH */
case 3:
if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {
struct omap2_hsmmc_info {
u8 mmc; /* controller 1/2/3 */
- u8 wires; /* 1/4/8 wires */
+ u32 caps; /* 4/8 wires and any additional host
+ * capabilities OR'd (ref. linux/mmc/host.h) */
bool transceiver; /* MMC-2 option */
bool ext_clock; /* use external pin for input clock */
bool cover_only; /* No card detect - just cover switch */
u32 idcode;
u16 hawkeye;
u8 rev;
- char *rev_name = "ES1.0";
/*
* The IC rev detection is done with hawkeye and rev.
hawkeye = (idcode >> 12) & 0xffff;
rev = (idcode >> 28) & 0xff;
- if ((hawkeye == 0xb852) && (rev == 0x0)) {
- omap_revision = OMAP4430_REV_ES1_0;
- omap_chip.oc |= CHIP_IS_OMAP4430ES1;
- pr_info("OMAP%04x %s\n", omap_rev() >> 16, rev_name);
- return;
+ /*
+ * Few initial ES2.0 samples IDCODE is same as ES1.0
+ * Use ARM register to detect the correct ES version
+ */
+ if (!rev) {
+ idcode = read_cpuid(CPUID_ID);
+ rev = (idcode & 0xf) - 1;
+ }
+
+ switch (hawkeye) {
+ case 0xb852:
+ switch (rev) {
+ case 0:
+ omap_revision = OMAP4430_REV_ES1_0;
+ omap_chip.oc |= CHIP_IS_OMAP4430ES1;
+ break;
+ case 1:
+ omap_revision = OMAP4430_REV_ES2_0;
+ omap_chip.oc |= CHIP_IS_OMAP4430ES2;
+ break;
+ default:
+ omap_revision = OMAP4430_REV_ES2_0;
+ omap_chip.oc |= CHIP_IS_OMAP4430ES2;
+ }
+ break;
+ default:
+ /* Unknown default to latest silicon rev as default*/
+ omap_revision = OMAP4430_REV_ES2_0;
+ omap_chip.oc |= CHIP_IS_OMAP4430ES2;
}
- pr_err("Unknown OMAP4 CPU id\n");
+ pr_info("OMAP%04x ES%d.0\n",
+ omap_rev() >> 16, ((omap_rev() >> 12) & 0xf) + 1);
}
#define OMAP3_SHOW_FEATURE(feat) \
omap2430_hwmod_init();
else if (cpu_is_omap34xx())
omap3xxx_hwmod_init();
+ else if (cpu_is_omap44xx())
+ omap44xx_hwmod_init();
+
/* The OPP tables have to be registered before a clk init */
omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps);
#ifndef CONFIG_PM_RUNTIME
skip_setup_idle = 1;
#endif
- if (cpu_is_omap24xx() || cpu_is_omap34xx()) /* FIXME: OMAP4 */
- omap_hwmod_late_init(skip_setup_idle);
-
+ omap_hwmod_late_init(skip_setup_idle);
if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
_omap2_init_reprogram_sdrc();
#include <plat/cpu.h>
#include <plat/mcbsp.h>
-#include "mux.h"
-
-static void omap2_mcbsp2_mux_setup(void)
-{
- omap_mux_init_signal("eac_ac_sclk.mcbsp2_clkx", OMAP_PULL_ENA);
- omap_mux_init_signal("eac_ac_fs.mcbsp2_fsx", OMAP_PULL_ENA);
- omap_mux_init_signal("eac_ac_din.mcbsp2_dr", OMAP_PULL_ENA);
- omap_mux_init_signal("eac_ac_dout.mcbsp2_dx", OMAP_PULL_ENA);
- omap_mux_init_gpio(117, OMAP_PULL_ENA);
- /*
- * TODO: Need to add MUX settings for OMAP 2430 SDP
- */
-}
-
-static void omap2_mcbsp_request(unsigned int id)
-{
- if (cpu_is_omap2420() && (id == OMAP_MCBSP2))
- omap2_mcbsp2_mux_setup();
-}
-
-static struct omap_mcbsp_ops omap2_mcbsp_ops = {
- .request = omap2_mcbsp_request,
-};
#ifdef CONFIG_ARCH_OMAP2420
static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX,
.rx_irq = INT_24XX_MCBSP1_IRQ_RX,
.tx_irq = INT_24XX_MCBSP1_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
},
{
.phys_base = OMAP24XX_MCBSP2_BASE,
.dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX,
.rx_irq = INT_24XX_MCBSP2_IRQ_RX,
.tx_irq = INT_24XX_MCBSP2_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
},
};
#define OMAP2420_MCBSP_PDATA_SZ ARRAY_SIZE(omap2420_mcbsp_pdata)
.dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX,
.rx_irq = INT_24XX_MCBSP1_IRQ_RX,
.tx_irq = INT_24XX_MCBSP1_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
},
{
.phys_base = OMAP24XX_MCBSP2_BASE,
.dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX,
.rx_irq = INT_24XX_MCBSP2_IRQ_RX,
.tx_irq = INT_24XX_MCBSP2_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
},
{
.phys_base = OMAP2430_MCBSP3_BASE,
.dma_tx_sync = OMAP24XX_DMA_MCBSP3_TX,
.rx_irq = INT_24XX_MCBSP3_IRQ_RX,
.tx_irq = INT_24XX_MCBSP3_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
},
{
.phys_base = OMAP2430_MCBSP4_BASE,
.dma_tx_sync = OMAP24XX_DMA_MCBSP4_TX,
.rx_irq = INT_24XX_MCBSP4_IRQ_RX,
.tx_irq = INT_24XX_MCBSP4_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
},
{
.phys_base = OMAP2430_MCBSP5_BASE,
.dma_tx_sync = OMAP24XX_DMA_MCBSP5_TX,
.rx_irq = INT_24XX_MCBSP5_IRQ_RX,
.tx_irq = INT_24XX_MCBSP5_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
},
};
#define OMAP2430_MCBSP_PDATA_SZ ARRAY_SIZE(omap2430_mcbsp_pdata)
.dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX,
.rx_irq = INT_24XX_MCBSP1_IRQ_RX,
.tx_irq = INT_24XX_MCBSP1_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
.buffer_size = 0x80, /* The FIFO has 128 locations */
},
{
.dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX,
.rx_irq = INT_24XX_MCBSP2_IRQ_RX,
.tx_irq = INT_24XX_MCBSP2_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
.buffer_size = 0x500, /* The FIFO has 1024 + 256 locations */
},
{
.dma_tx_sync = OMAP24XX_DMA_MCBSP3_TX,
.rx_irq = INT_24XX_MCBSP3_IRQ_RX,
.tx_irq = INT_24XX_MCBSP3_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
.buffer_size = 0x80, /* The FIFO has 128 locations */
},
{
.dma_tx_sync = OMAP24XX_DMA_MCBSP4_TX,
.rx_irq = INT_24XX_MCBSP4_IRQ_RX,
.tx_irq = INT_24XX_MCBSP4_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
.buffer_size = 0x80, /* The FIFO has 128 locations */
},
{
.dma_tx_sync = OMAP24XX_DMA_MCBSP5_TX,
.rx_irq = INT_24XX_MCBSP5_IRQ_RX,
.tx_irq = INT_24XX_MCBSP5_IRQ_TX,
- .ops = &omap2_mcbsp_ops,
.buffer_size = 0x80, /* The FIFO has 128 locations */
},
};
.dma_rx_sync = OMAP44XX_DMA_MCBSP1_RX,
.dma_tx_sync = OMAP44XX_DMA_MCBSP1_TX,
.tx_irq = OMAP44XX_IRQ_MCBSP1,
- .ops = &omap2_mcbsp_ops,
},
{
.phys_base = OMAP44XX_MCBSP2_BASE,
.dma_rx_sync = OMAP44XX_DMA_MCBSP2_RX,
.dma_tx_sync = OMAP44XX_DMA_MCBSP2_TX,
.tx_irq = OMAP44XX_IRQ_MCBSP2,
- .ops = &omap2_mcbsp_ops,
},
{
.phys_base = OMAP44XX_MCBSP3_BASE,
.dma_rx_sync = OMAP44XX_DMA_MCBSP3_RX,
.dma_tx_sync = OMAP44XX_DMA_MCBSP3_TX,
.tx_irq = OMAP44XX_IRQ_MCBSP3,
- .ops = &omap2_mcbsp_ops,
},
{
.phys_base = OMAP44XX_MCBSP4_BASE,
.dma_rx_sync = OMAP44XX_DMA_MCBSP4_RX,
.dma_tx_sync = OMAP44XX_DMA_MCBSP4_TX,
.tx_irq = OMAP44XX_IRQ_MCBSP4,
- .ops = &omap2_mcbsp_ops,
},
};
#define OMAP44XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap44xx_mcbsp_pdata)
int __init omap_mux_init_gpio(int gpio, int val)
{
struct omap_mux_entry *e;
- struct omap_mux *gpio_mux;
+ struct omap_mux *gpio_mux = NULL;
u16 old_mode;
u16 mux_mode;
int found = 0;
omap_smc1(0x102, 0x1);
/*
- * 32KB way size, 16-way associativity,
- * parity disabled
+ * 16-way associativity, parity disabled
+ * Way size - 32KB (es1.0)
+ * Way size - 64KB (es2.0 +)
*/
- l2x0_init(l2cache_base, 0x0e050000, 0xc0000fff);
+ if (omap_rev() == OMAP4430_REV_ES1_0)
+ l2x0_init(l2cache_base, 0x0e050000, 0xc0000fff);
+ else
+ l2x0_init(l2cache_base, 0x0e070000, 0xc0000fff);
return 0;
}
--- /dev/null
+/*
+ * Hardware modules present on the OMAP44xx chips
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2010 Nokia Corporation
+ *
+ * Paul Walmsley
+ * Benoit Cousson
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+
+#include <plat/omap_hwmod.h>
+#include <plat/cpu.h>
+
+#include "omap_hwmod_common_data.h"
+
+#include "cm.h"
+#include "prm-regbits-44xx.h"
+
+/* Base offset for all OMAP4 interrupts external to MPUSS */
+#define OMAP44XX_IRQ_GIC_START 32
+
+/* Base offset for all OMAP4 dma requests */
+#define OMAP44XX_DMA_REQ_START 1
+
+/* Backward references (IPs with Bus Master capability) */
+static struct omap_hwmod omap44xx_dmm_hwmod;
+static struct omap_hwmod omap44xx_emif_fw_hwmod;
+static struct omap_hwmod omap44xx_l3_instr_hwmod;
+static struct omap_hwmod omap44xx_l3_main_1_hwmod;
+static struct omap_hwmod omap44xx_l3_main_2_hwmod;
+static struct omap_hwmod omap44xx_l3_main_3_hwmod;
+static struct omap_hwmod omap44xx_l4_abe_hwmod;
+static struct omap_hwmod omap44xx_l4_cfg_hwmod;
+static struct omap_hwmod omap44xx_l4_per_hwmod;
+static struct omap_hwmod omap44xx_l4_wkup_hwmod;
+static struct omap_hwmod omap44xx_mpu_hwmod;
+static struct omap_hwmod omap44xx_mpu_private_hwmod;
+
+/*
+ * Interconnects omap_hwmod structures
+ * hwmods that compose the global OMAP interconnect
+ */
+
+/*
+ * 'dmm' class
+ * instance(s): dmm
+ */
+static struct omap_hwmod_class omap44xx_dmm_hwmod_class = {
+ .name = "dmm",
+};
+
+/* dmm interface data */
+/* l3_main_1 -> dmm */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_1__dmm = {
+ .master = &omap44xx_l3_main_1_hwmod,
+ .slave = &omap44xx_dmm_hwmod,
+ .clk = "l3_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* mpu -> dmm */
+static struct omap_hwmod_ocp_if omap44xx_mpu__dmm = {
+ .master = &omap44xx_mpu_hwmod,
+ .slave = &omap44xx_dmm_hwmod,
+ .clk = "l3_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* dmm slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_dmm_slaves[] = {
+ &omap44xx_l3_main_1__dmm,
+ &omap44xx_mpu__dmm,
+};
+
+static struct omap_hwmod_irq_info omap44xx_dmm_irqs[] = {
+ { .irq = 113 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod omap44xx_dmm_hwmod = {
+ .name = "dmm",
+ .class = &omap44xx_dmm_hwmod_class,
+ .slaves = omap44xx_dmm_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap44xx_dmm_slaves),
+ .mpu_irqs = omap44xx_dmm_irqs,
+ .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_dmm_irqs),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/*
+ * 'emif_fw' class
+ * instance(s): emif_fw
+ */
+static struct omap_hwmod_class omap44xx_emif_fw_hwmod_class = {
+ .name = "emif_fw",
+};
+
+/* emif_fw interface data */
+/* dmm -> emif_fw */
+static struct omap_hwmod_ocp_if omap44xx_dmm__emif_fw = {
+ .master = &omap44xx_dmm_hwmod,
+ .slave = &omap44xx_emif_fw_hwmod,
+ .clk = "l3_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg -> emif_fw */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__emif_fw = {
+ .master = &omap44xx_l4_cfg_hwmod,
+ .slave = &omap44xx_emif_fw_hwmod,
+ .clk = "l4_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* emif_fw slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_emif_fw_slaves[] = {
+ &omap44xx_dmm__emif_fw,
+ &omap44xx_l4_cfg__emif_fw,
+};
+
+static struct omap_hwmod omap44xx_emif_fw_hwmod = {
+ .name = "emif_fw",
+ .class = &omap44xx_emif_fw_hwmod_class,
+ .slaves = omap44xx_emif_fw_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap44xx_emif_fw_slaves),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/*
+ * 'l3' class
+ * instance(s): l3_instr, l3_main_1, l3_main_2, l3_main_3
+ */
+static struct omap_hwmod_class omap44xx_l3_hwmod_class = {
+ .name = "l3",
+};
+
+/* l3_instr interface data */
+/* l3_main_3 -> l3_instr */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_3__l3_instr = {
+ .master = &omap44xx_l3_main_3_hwmod,
+ .slave = &omap44xx_l3_instr_hwmod,
+ .clk = "l3_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_instr slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_l3_instr_slaves[] = {
+ &omap44xx_l3_main_3__l3_instr,
+};
+
+static struct omap_hwmod omap44xx_l3_instr_hwmod = {
+ .name = "l3_instr",
+ .class = &omap44xx_l3_hwmod_class,
+ .slaves = omap44xx_l3_instr_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap44xx_l3_instr_slaves),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* l3_main_2 -> l3_main_1 */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l3_main_1 = {
+ .master = &omap44xx_l3_main_2_hwmod,
+ .slave = &omap44xx_l3_main_1_hwmod,
+ .clk = "l3_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg -> l3_main_1 */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_1 = {
+ .master = &omap44xx_l4_cfg_hwmod,
+ .slave = &omap44xx_l3_main_1_hwmod,
+ .clk = "l4_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* mpu -> l3_main_1 */
+static struct omap_hwmod_ocp_if omap44xx_mpu__l3_main_1 = {
+ .master = &omap44xx_mpu_hwmod,
+ .slave = &omap44xx_l3_main_1_hwmod,
+ .clk = "l3_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_1 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_l3_main_1_slaves[] = {
+ &omap44xx_l3_main_2__l3_main_1,
+ &omap44xx_l4_cfg__l3_main_1,
+ &omap44xx_mpu__l3_main_1,
+};
+
+static struct omap_hwmod omap44xx_l3_main_1_hwmod = {
+ .name = "l3_main_1",
+ .class = &omap44xx_l3_hwmod_class,
+ .slaves = omap44xx_l3_main_1_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_1_slaves),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* l3_main_2 interface data */
+/* l3_main_1 -> l3_main_2 */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_2 = {
+ .master = &omap44xx_l3_main_1_hwmod,
+ .slave = &omap44xx_l3_main_2_hwmod,
+ .clk = "l3_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg -> l3_main_2 */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_2 = {
+ .master = &omap44xx_l4_cfg_hwmod,
+ .slave = &omap44xx_l3_main_2_hwmod,
+ .clk = "l4_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_2 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_l3_main_2_slaves[] = {
+ &omap44xx_l3_main_1__l3_main_2,
+ &omap44xx_l4_cfg__l3_main_2,
+};
+
+static struct omap_hwmod omap44xx_l3_main_2_hwmod = {
+ .name = "l3_main_2",
+ .class = &omap44xx_l3_hwmod_class,
+ .slaves = omap44xx_l3_main_2_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_2_slaves),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* l3_main_3 interface data */
+/* l3_main_1 -> l3_main_3 */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_3 = {
+ .master = &omap44xx_l3_main_1_hwmod,
+ .slave = &omap44xx_l3_main_3_hwmod,
+ .clk = "l3_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_2 -> l3_main_3 */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l3_main_3 = {
+ .master = &omap44xx_l3_main_2_hwmod,
+ .slave = &omap44xx_l3_main_3_hwmod,
+ .clk = "l3_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg -> l3_main_3 */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_3 = {
+ .master = &omap44xx_l4_cfg_hwmod,
+ .slave = &omap44xx_l3_main_3_hwmod,
+ .clk = "l4_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_3 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_l3_main_3_slaves[] = {
+ &omap44xx_l3_main_1__l3_main_3,
+ &omap44xx_l3_main_2__l3_main_3,
+ &omap44xx_l4_cfg__l3_main_3,
+};
+
+static struct omap_hwmod omap44xx_l3_main_3_hwmod = {
+ .name = "l3_main_3",
+ .class = &omap44xx_l3_hwmod_class,
+ .slaves = omap44xx_l3_main_3_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_3_slaves),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/*
+ * 'l4' class
+ * instance(s): l4_abe, l4_cfg, l4_per, l4_wkup
+ */
+static struct omap_hwmod_class omap44xx_l4_hwmod_class = {
+ .name = "l4",
+};
+
+/* l4_abe interface data */
+/* l3_main_1 -> l4_abe */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l4_abe = {
+ .master = &omap44xx_l3_main_1_hwmod,
+ .slave = &omap44xx_l4_abe_hwmod,
+ .clk = "l3_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* mpu -> l4_abe */
+static struct omap_hwmod_ocp_if omap44xx_mpu__l4_abe = {
+ .master = &omap44xx_mpu_hwmod,
+ .slave = &omap44xx_l4_abe_hwmod,
+ .clk = "ocp_abe_iclk",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_abe slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_l4_abe_slaves[] = {
+ &omap44xx_l3_main_1__l4_abe,
+ &omap44xx_mpu__l4_abe,
+};
+
+static struct omap_hwmod omap44xx_l4_abe_hwmod = {
+ .name = "l4_abe",
+ .class = &omap44xx_l4_hwmod_class,
+ .slaves = omap44xx_l4_abe_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap44xx_l4_abe_slaves),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* l4_cfg interface data */
+/* l3_main_1 -> l4_cfg */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l4_cfg = {
+ .master = &omap44xx_l3_main_1_hwmod,
+ .slave = &omap44xx_l4_cfg_hwmod,
+ .clk = "l3_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_l4_cfg_slaves[] = {
+ &omap44xx_l3_main_1__l4_cfg,
+};
+
+static struct omap_hwmod omap44xx_l4_cfg_hwmod = {
+ .name = "l4_cfg",
+ .class = &omap44xx_l4_hwmod_class,
+ .slaves = omap44xx_l4_cfg_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap44xx_l4_cfg_slaves),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* l4_per interface data */
+/* l3_main_2 -> l4_per */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l4_per = {
+ .master = &omap44xx_l3_main_2_hwmod,
+ .slave = &omap44xx_l4_per_hwmod,
+ .clk = "l3_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_l4_per_slaves[] = {
+ &omap44xx_l3_main_2__l4_per,
+};
+
+static struct omap_hwmod omap44xx_l4_per_hwmod = {
+ .name = "l4_per",
+ .class = &omap44xx_l4_hwmod_class,
+ .slaves = omap44xx_l4_per_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap44xx_l4_per_slaves),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* l4_wkup interface data */
+/* l4_cfg -> l4_wkup */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l4_wkup = {
+ .master = &omap44xx_l4_cfg_hwmod,
+ .slave = &omap44xx_l4_wkup_hwmod,
+ .clk = "l4_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_wkup slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_l4_wkup_slaves[] = {
+ &omap44xx_l4_cfg__l4_wkup,
+};
+
+static struct omap_hwmod omap44xx_l4_wkup_hwmod = {
+ .name = "l4_wkup",
+ .class = &omap44xx_l4_hwmod_class,
+ .slaves = omap44xx_l4_wkup_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap44xx_l4_wkup_slaves),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/*
+ * 'mpu_bus' class
+ * instance(s): mpu_private
+ */
+static struct omap_hwmod_class omap44xx_mpu_bus_hwmod_class = {
+ .name = "mpu_bus",
+};
+
+/* mpu_private interface data */
+/* mpu -> mpu_private */
+static struct omap_hwmod_ocp_if omap44xx_mpu__mpu_private = {
+ .master = &omap44xx_mpu_hwmod,
+ .slave = &omap44xx_mpu_private_hwmod,
+ .clk = "l3_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* mpu_private slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_mpu_private_slaves[] = {
+ &omap44xx_mpu__mpu_private,
+};
+
+static struct omap_hwmod omap44xx_mpu_private_hwmod = {
+ .name = "mpu_private",
+ .class = &omap44xx_mpu_bus_hwmod_class,
+ .slaves = omap44xx_mpu_private_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap44xx_mpu_private_slaves),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/*
+ * 'mpu' class
+ * mpu sub-system
+ */
+
+static struct omap_hwmod_class omap44xx_mpu_hwmod_class = {
+ .name = "mpu",
+};
+
+/* mpu */
+static struct omap_hwmod_irq_info omap44xx_mpu_irqs[] = {
+ { .name = "pl310", .irq = 0 + OMAP44XX_IRQ_GIC_START },
+ { .name = "cti0", .irq = 1 + OMAP44XX_IRQ_GIC_START },
+ { .name = "cti1", .irq = 2 + OMAP44XX_IRQ_GIC_START },
+};
+
+/* mpu master ports */
+static struct omap_hwmod_ocp_if *omap44xx_mpu_masters[] = {
+ &omap44xx_mpu__l3_main_1,
+ &omap44xx_mpu__l4_abe,
+ &omap44xx_mpu__dmm,
+};
+
+static struct omap_hwmod omap44xx_mpu_hwmod = {
+ .name = "mpu",
+ .class = &omap44xx_mpu_hwmod_class,
+ .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+ .mpu_irqs = omap44xx_mpu_irqs,
+ .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_mpu_irqs),
+ .main_clk = "dpll_mpu_m2_ck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_reg = OMAP4430_CM_MPU_MPU_CLKCTRL,
+ },
+ },
+ .masters = omap44xx_mpu_masters,
+ .masters_cnt = ARRAY_SIZE(omap44xx_mpu_masters),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
+ /* dmm class */
+ &omap44xx_dmm_hwmod,
+ /* emif_fw class */
+ &omap44xx_emif_fw_hwmod,
+ /* l3 class */
+ &omap44xx_l3_instr_hwmod,
+ &omap44xx_l3_main_1_hwmod,
+ &omap44xx_l3_main_2_hwmod,
+ &omap44xx_l3_main_3_hwmod,
+ /* l4 class */
+ &omap44xx_l4_abe_hwmod,
+ &omap44xx_l4_cfg_hwmod,
+ &omap44xx_l4_per_hwmod,
+ &omap44xx_l4_wkup_hwmod,
+ /* mpu_bus class */
+ &omap44xx_mpu_private_hwmod,
+
+ /* mpu class */
+ &omap44xx_mpu_hwmod,
+ NULL,
+};
+
+int __init omap44xx_hwmod_init(void)
+{
+ return omap_hwmod_init(omap44xx_hwmods);
+}
+
#include <plat/board.h>
#include <plat/powerdomain.h>
#include <plat/clockdomain.h>
+#include <plat/dmtimer.h>
#include "prm.h"
#include "cm.h"
#include "pm.h"
int omap2_pm_debug;
+u32 enable_off_mode;
+u32 sleep_while_idle;
+u32 wakeup_timer_seconds;
+u32 wakeup_timer_milliseconds;
#define DUMP_PRM_MOD_REG(mod, reg) \
regs[reg_count].name = #mod "." #reg; \
pwrdm->timer = t;
}
+void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
+{
+ u32 tick_rate, cycles;
+
+ if (!seconds && !milliseconds)
+ return;
+
+ tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
+ cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
+ omap_dm_timer_stop(gptimer_wakeup);
+ omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
+
+ pr_info("PM: Resume timer in %u.%03u secs"
+ " (%d ticks at %d ticks/sec.)\n",
+ seconds, milliseconds, cycles, tick_rate);
+}
+
static int clkdm_dbg_show_counter(struct clockdomain *clkdm, void *user)
{
struct seq_file *s = (struct seq_file *)user;
static int pwrdm_suspend_get(void *data, u64 *val)
{
- int ret;
- ret = omap3_pm_get_suspend_state((struct powerdomain *)data);
+ int ret = -EINVAL;
+
+ if (cpu_is_omap34xx())
+ ret = omap3_pm_get_suspend_state((struct powerdomain *)data);
*val = ret;
if (ret >= 0)
static int pwrdm_suspend_set(void *data, u64 val)
{
- return omap3_pm_set_suspend_state((struct powerdomain *)data, (int)val);
+ if (cpu_is_omap34xx())
+ return omap3_pm_set_suspend_state(
+ (struct powerdomain *)data, (int)val);
+ return -EINVAL;
}
DEFINE_SIMPLE_ATTRIBUTE(pwrdm_suspend_fops, pwrdm_suspend_get,
*option = val;
- if (option == &enable_off_mode)
- omap3_pm_off_mode_enable(val);
+ if (option == &enable_off_mode) {
+ if (cpu_is_omap34xx())
+ omap3_pm_off_mode_enable(val);
+ }
return 0;
}
&sleep_while_idle, &pm_dbg_option_fops);
(void) debugfs_create_file("wakeup_timer_seconds", S_IRUGO | S_IWUGO, d,
&wakeup_timer_seconds, &pm_dbg_option_fops);
+ (void) debugfs_create_file("wakeup_timer_milliseconds",
+ S_IRUGO | S_IWUGO, d, &wakeup_timer_milliseconds,
+ &pm_dbg_option_fops);
pm_dbg_init_done = 1;
return 0;
#include <plat/omap_device.h>
#include <plat/common.h>
+#include <plat/powerdomain.h>
+#include <plat/clockdomain.h>
+
static struct omap_device_pm_latency *pm_lats;
static struct device *mpu_dev;
-static struct device *dsp_dev;
+static struct device *iva_dev;
static struct device *l3_dev;
+static struct device *dsp_dev;
struct device *omap2_get_mpuss_device(void)
{
return mpu_dev;
}
-struct device *omap2_get_dsp_device(void)
+struct device *omap2_get_iva_device(void)
{
- WARN_ON_ONCE(!dsp_dev);
- return dsp_dev;
+ WARN_ON_ONCE(!iva_dev);
+ return iva_dev;
}
struct device *omap2_get_l3_device(void)
return l3_dev;
}
+struct device *omap4_get_dsp_device(void)
+{
+ WARN_ON_ONCE(!dsp_dev);
+ return dsp_dev;
+}
+EXPORT_SYMBOL(omap4_get_dsp_device);
+
/* static int _init_omap_device(struct omap_hwmod *oh, void *user) */
static int _init_omap_device(char *name, struct device **new_dev)
{
static void omap2_init_processor_devices(void)
{
_init_omap_device("mpu", &mpu_dev);
- _init_omap_device("iva", &dsp_dev);
- _init_omap_device("l3_main", &l3_dev);
+ _init_omap_device("iva", &iva_dev);
+ if (cpu_is_omap44xx()) {
+ _init_omap_device("l3_main_1", &l3_dev);
+ _init_omap_device("dsp", &dsp_dev);
+ } else {
+ _init_omap_device("l3_main", &l3_dev);
+ }
+}
+
+/*
+ * This sets pwrdm state (other than mpu & core. Currently only ON &
+ * RET are supported. Function is assuming that clkdm doesn't have
+ * hw_sup mode enabled.
+ */
+int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
+{
+ u32 cur_state;
+ int sleep_switch = 0;
+ int ret = 0;
+
+ if (pwrdm == NULL || IS_ERR(pwrdm))
+ return -EINVAL;
+
+ while (!(pwrdm->pwrsts & (1 << state))) {
+ if (state == PWRDM_POWER_OFF)
+ return ret;
+ state--;
+ }
+
+ cur_state = pwrdm_read_next_pwrst(pwrdm);
+ if (cur_state == state)
+ return ret;
+
+ if (pwrdm_read_pwrst(pwrdm) < PWRDM_POWER_ON) {
+ omap2_clkdm_wakeup(pwrdm->pwrdm_clkdms[0]);
+ sleep_switch = 1;
+ pwrdm_wait_transition(pwrdm);
+ }
+
+ ret = pwrdm_set_next_pwrst(pwrdm, state);
+ if (ret) {
+ printk(KERN_ERR "Unable to set state of powerdomain: %s\n",
+ pwrdm->name);
+ goto err;
+ }
+
+ if (sleep_switch) {
+ omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]);
+ pwrdm_wait_transition(pwrdm);
+ pwrdm_state_switch(pwrdm);
+ }
+
+err:
+ return ret;
}
static int __init omap2_common_pm_init(void)
extern void omap3_pm_off_mode_enable(int);
extern void omap_sram_idle(void);
extern int omap3_can_sleep(void);
-extern int set_pwrdm_state(struct powerdomain *pwrdm, u32 state);
+extern int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state);
extern int omap3_idle_init(void);
struct cpuidle_params {
#ifdef CONFIG_PM_DEBUG
extern void omap2_pm_dump(int mode, int resume, unsigned int us);
+extern void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds);
extern int omap2_pm_debug;
#else
#define omap2_pm_dump(mode, resume, us) do {} while (0);
+#define omap2_pm_wakeup_on_timer(seconds, milliseconds) do {} while (0);
#define omap2_pm_debug 0
#endif
#include <plat/prcm.h>
#include <plat/gpmc.h>
#include <plat/dma.h>
-#include <plat/dmtimer.h>
#include <asm/tlbflush.h>
#define OMAP343X_TABLE_VALUE_OFFSET 0x30
#define OMAP343X_CONTROL_REG_VALUE_OFFSET 0x32
-u32 enable_off_mode;
-u32 sleep_while_idle;
-u32 wakeup_timer_seconds;
-u32 wakeup_timer_milliseconds;
-
struct power_state {
struct powerdomain *pwrdm;
u32 next_state;
int core_next_state = PWRDM_POWER_ON;
int core_prev_state, per_prev_state;
u32 sdrc_pwr = 0;
- int per_state_modified = 0;
if (!_omap_sram_idle)
return;
/* Enable IO-PAD and IO-CHAIN wakeups */
per_next_state = pwrdm_read_next_pwrst(per_pwrdm);
core_next_state = pwrdm_read_next_pwrst(core_pwrdm);
- if (omap3_has_io_wakeup() && \
- (per_next_state < PWRDM_POWER_ON ||
- core_next_state < PWRDM_POWER_ON)) {
+ if (omap3_has_io_wakeup() &&
+ (per_next_state < PWRDM_POWER_ON ||
+ core_next_state < PWRDM_POWER_ON)) {
prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN);
omap3_enable_io_chain();
}
if (per_next_state < PWRDM_POWER_ON) {
omap_uart_prepare_idle(2);
omap2_gpio_prepare_for_idle(per_next_state);
- if (per_next_state == PWRDM_POWER_OFF) {
- if (core_next_state == PWRDM_POWER_ON) {
- per_next_state = PWRDM_POWER_RET;
- pwrdm_set_next_pwrst(per_pwrdm, per_next_state);
- per_state_modified = 1;
- } else
+ if (per_next_state == PWRDM_POWER_OFF)
omap3_per_save_context();
- }
}
- if (pwrdm_read_pwrst(cam_pwrdm) == PWRDM_POWER_ON)
- omap2_clkdm_deny_idle(mpu_pwrdm->pwrdm_clkdms[0]);
-
/* CORE */
if (core_next_state < PWRDM_POWER_ON) {
omap_uart_prepare_idle(0);
if (per_prev_state == PWRDM_POWER_OFF)
omap3_per_restore_context();
omap_uart_resume_idle(2);
- if (per_state_modified)
- pwrdm_set_next_pwrst(per_pwrdm, PWRDM_POWER_OFF);
}
/* Disable IO-PAD and IO-CHAIN wakeup */
return 1;
}
-/* This sets pwrdm state (other than mpu & core. Currently only ON &
- * RET are supported. Function is assuming that clkdm doesn't have
- * hw_sup mode enabled. */
-int set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
-{
- u32 cur_state;
- int sleep_switch = 0;
- int ret = 0;
-
- if (pwrdm == NULL || IS_ERR(pwrdm))
- return -EINVAL;
-
- while (!(pwrdm->pwrsts & (1 << state))) {
- if (state == PWRDM_POWER_OFF)
- return ret;
- state--;
- }
-
- cur_state = pwrdm_read_next_pwrst(pwrdm);
- if (cur_state == state)
- return ret;
-
- if (pwrdm_read_pwrst(pwrdm) < PWRDM_POWER_ON) {
- omap2_clkdm_wakeup(pwrdm->pwrdm_clkdms[0]);
- sleep_switch = 1;
- pwrdm_wait_transition(pwrdm);
- }
-
- ret = pwrdm_set_next_pwrst(pwrdm, state);
- if (ret) {
- printk(KERN_ERR "Unable to set state of powerdomain: %s\n",
- pwrdm->name);
- goto err;
- }
-
- if (sleep_switch) {
- omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]);
- pwrdm_wait_transition(pwrdm);
- pwrdm_state_switch(pwrdm);
- }
-
-err:
- return ret;
-}
-
static void omap3_pm_idle(void)
{
local_irq_disable();
#ifdef CONFIG_SUSPEND
static suspend_state_t suspend_state;
-static void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
-{
- u32 tick_rate, cycles;
-
- if (!seconds && !milliseconds)
- return;
-
- tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
- cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
- omap_dm_timer_stop(gptimer_wakeup);
- omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
-
- pr_info("PM: Resume timer in %u.%03u secs"
- " (%d ticks at %d ticks/sec.)\n",
- seconds, milliseconds, cycles, tick_rate);
-}
-
static int omap3_pm_prepare(void)
{
disable_hlt();
pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm);
/* Set ones wanted by suspend */
list_for_each_entry(pwrst, &pwrst_list, node) {
- if (set_pwrdm_state(pwrst->pwrdm, pwrst->next_state))
+ if (omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state))
goto restore;
if (pwrdm_clear_all_prev_pwrst(pwrst->pwrdm))
goto restore;
pwrst->pwrdm->name, pwrst->next_state);
ret = -1;
}
- set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
+ omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
}
if (ret)
printk(KERN_ERR "Could not enter target state in pm_suspend\n");
list_for_each_entry(pwrst, &pwrst_list, node) {
pwrst->next_state = state;
- set_pwrdm_state(pwrst->pwrdm, state);
+ omap_set_pwrdm_state(pwrst->pwrdm, state);
}
}
if (pwrdm_has_hdwr_sar(pwrdm))
pwrdm_enable_hdwr_sar(pwrdm);
- return set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
+ return omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
}
/*
*/
static int __init clkdms_setup(struct clockdomain *clkdm, void *unused)
{
- clkdm_clear_all_wkdeps(clkdm);
- clkdm_clear_all_sleepdeps(clkdm);
-
if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO)
omap2_clkdm_allow_idle(clkdm);
else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP &&
--- /dev/null
+/*
+ * Runtime PM support code for OMAP
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/pm_runtime.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+
+#include <plat/omap_device.h>
+#include <plat/omap-pm.h>
+
+#ifdef CONFIG_PM_RUNTIME
+int omap_pm_runtime_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ int r, ret = 0;
+
+ dev_dbg(dev, "%s\n", __func__);
+
+ ret = pm_generic_runtime_suspend(dev);
+
+ if (!ret && dev->parent == &omap_device_parent) {
+ r = omap_device_idle(pdev);
+ WARN_ON(r);
+ }
+
+ return ret;
+};
+
+int omap_pm_runtime_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ int r;
+
+ dev_dbg(dev, "%s\n", __func__);
+
+ if (dev->parent == &omap_device_parent) {
+ r = omap_device_enable(pdev);
+ WARN_ON(r);
+ }
+
+ return pm_generic_runtime_resume(dev);
+};
+#else
+#define omap_pm_runtime_suspend NULL
+#define omap_pm_runtime_resume NULL
+#endif /* CONFIG_PM_RUNTIME */
+
+static int __init omap_pm_runtime_init(void)
+{
+ const struct dev_pm_ops *pm;
+ struct dev_pm_ops *omap_pm;
+
+ pm = platform_bus_get_pm_ops();
+ if (!pm) {
+ pr_err("%s: unable to get dev_pm_ops from platform_bus\n",
+ __func__);
+ return -ENODEV;
+ }
+
+ omap_pm = kmemdup(pm, sizeof(struct dev_pm_ops), GFP_KERNEL);
+ if (!omap_pm) {
+ pr_err("%s: unable to alloc memory for new dev_pm_ops\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ omap_pm->runtime_suspend = omap_pm_runtime_suspend;
+ omap_pm->runtime_resume = omap_pm_runtime_resume;
+
+ platform_bus_set_pm_ops(omap_pm);
+
+ return 0;
+}
+core_initcall(omap_pm_runtime_init);
# OMAP mailbox framework
obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o
-obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o
\ No newline at end of file
+obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o
* When the functional clock disappears, too quick writes seem
* to cause an abort. XXX Is this still necessary?
*/
- __delay(150000);
+ __delay(300000);
return ret;
}
for (i = min; i < gpio_bank_count; i++) {
struct gpio_bank *bank = &gpio_bank[i];
- u32 l1, l2;
+ u32 l1 = 0, l2 = 0;
+ int j;
- if (bank->dbck_enable_mask)
+ for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++)
clk_disable(bank->dbck);
if (power_state > PWRDM_POWER_OFF)
min = 1;
for (i = min; i < gpio_bank_count; i++) {
struct gpio_bank *bank = &gpio_bank[i];
- u32 l, gen, gen0, gen1;
+ u32 l = 0, gen, gen0, gen1;
+ int j;
- if (bank->dbck_enable_mask)
+ for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++)
clk_enable(bank->dbck);
if (!workaround_enabled)
})
extern struct device *omap2_get_mpuss_device(void);
-extern struct device *omap2_get_dsp_device(void);
+extern struct device *omap2_get_iva_device(void);
extern struct device *omap2_get_l3_device(void);
+extern struct device *omap4_get_dsp_device(void);
#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
#define OMAP443X_CLASS 0x44300044
#define OMAP4430_REV_ES1_0 0x44300044
+#define OMAP4430_REV_ES2_0 0x44301044
/*
* omap_chip bits
#define CHIP_IS_OMAP4430ES1 (1 << 8)
#define CHIP_IS_OMAP3630ES1_1 (1 << 9)
#define CHIP_IS_OMAP3630ES1_2 (1 << 10)
+#define CHIP_IS_OMAP4430ES2 (1 << 11)
#define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
-#define CHIP_IS_OMAP4430 (CHIP_IS_OMAP4430ES1)
+#define CHIP_IS_OMAP4430 (CHIP_IS_OMAP4430ES1 | \
+ CHIP_IS_OMAP4430ES2)
/*
* "GE" here represents "greater than or equal to" in terms of ES
* 02110-1301 USA
*
*/
+#ifndef __ASM__ARCH_OMAP_I2C_H
+#define __ASM__ARCH_OMAP_I2C_H
#include <linux/i2c.h>
void __init omap1_i2c_mux_pins(int bus_id);
void __init omap2_i2c_mux_pins(int bus_id);
+
+#endif /* __ASM__ARCH_OMAP_I2C_H */
struct omap_mmc_slot_data {
- /* 4 wire signaling is optional, and is used for SD/SDIO/HSMMC;
- * 8 wire signaling is also optional, and is used with HSMMC
- */
- u8 wires;
+ /* 4/8 wires and any additional host capabilities
+ * need to OR'd all capabilities (ref. linux/mmc/host.h) */
+ u32 caps;
/*
* nomux means "standard" muxing is wrong on this board, and
#include <plat/omap_hwmod.h>
+extern struct device omap_device_parent;
+
/* omap_device._state values */
#define OMAP_DEVICE_STATE_UNKNOWN 0
#define OMAP_DEVICE_STATE_ENABLED 1
*
*/
struct omap_device {
- u32 magic;
struct platform_device pdev;
struct omap_hwmod **hwmods;
struct omap_device_pm_latency *pm_lats;
/* Core code interface */
-bool omap_device_is_valid(struct omap_device *od);
int omap_device_count_resources(struct omap_device *od);
int omap_device_fill_resources(struct omap_device *od, struct resource *res);
extern int omap2420_hwmod_init(void);
extern int omap2430_hwmod_init(void);
extern int omap3xxx_hwmod_init(void);
+extern int omap44xx_hwmod_init(void);
#endif
/* omap4 based boards using UART3 */
DEBUG_LL_OMAP4(3, omap_4430sdp);
+ DEBUG_LL_OMAP4(3, omap4_panda);
/* zoom2/3 external uart */
DEBUG_LL_ZOOM(omap_zoom2);
#if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP_OTG_MODULE)
void omap2_usbfs_init(struct omap_usb_config *pdata);
#else
-static inline omap2_usbfs_init(struct omap_usb_config *pdata)
+static inline void omap2_usbfs_init(struct omap_usb_config *pdata)
{
}
#endif
void omap_mcbsp_start(unsigned int id, int tx, int rx)
{
struct omap_mcbsp *mcbsp;
- int idle;
+ int enable_srg = 0;
u16 w;
if (!omap_mcbsp_check_valid_id(id)) {
mcbsp->rx_word_length = (MCBSP_READ_CACHE(mcbsp, RCR1) >> 5) & 0x7;
mcbsp->tx_word_length = (MCBSP_READ_CACHE(mcbsp, XCR1) >> 5) & 0x7;
- idle = !((MCBSP_READ_CACHE(mcbsp, SPCR2) |
- MCBSP_READ_CACHE(mcbsp, SPCR1)) & 1);
+ /* Only enable SRG, if McBSP is master */
+ w = MCBSP_READ_CACHE(mcbsp, PCR0);
+ if (w & (FSXM | FSRM | CLKXM | CLKRM))
+ enable_srg = !((MCBSP_READ_CACHE(mcbsp, SPCR2) |
+ MCBSP_READ_CACHE(mcbsp, SPCR1)) & 1);
- if (idle) {
+ if (enable_srg) {
/* Start the sample generator */
w = MCBSP_READ_CACHE(mcbsp, SPCR2);
MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 6));
*/
udelay(500);
- if (idle) {
+ if (enable_srg) {
/* Start frame sync */
w = MCBSP_READ_CACHE(mcbsp, SPCR2);
MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 7));
#define USE_WAKEUP_LAT 0
#define IGNORE_WAKEUP_LAT 1
-/*
- * OMAP_DEVICE_MAGIC: used to determine whether a struct omap_device
- * obtained via container_of() is in fact a struct omap_device
- */
-#define OMAP_DEVICE_MAGIC 0xf00dcafe
-
/* Private functions */
/**
od->pm_lats = pm_lats;
od->pm_lats_cnt = pm_lats_cnt;
- od->magic = OMAP_DEVICE_MAGIC;
-
if (is_early_device)
ret = omap_early_device_register(od);
else
{
pr_debug("omap_device: %s: registering\n", od->pdev.name);
+ od->pdev.dev.parent = &omap_device_parent;
return platform_device_register(&od->pdev);
}
return ret;
}
-/**
- * omap_device_is_valid - Check if pointer is a valid omap_device
- * @od: struct omap_device *
- *
- * Return whether struct omap_device pointer @od points to a valid
- * omap_device.
- */
-bool omap_device_is_valid(struct omap_device *od)
-{
- return (od && od->magic == OMAP_DEVICE_MAGIC);
-}
-
/**
* omap_device_get_pwrdm - return the powerdomain * associated with @od
* @od: struct omap_device *
/* XXX pass along return value here? */
return 0;
}
+
+struct device omap_device_parent = {
+ .init_name = "omap",
+ .parent = &platform_bus,
+};
+
+static int __init omap_device_init(void)
+{
+ return device_register(&omap_device_parent);
+}
+core_initcall(omap_device_init);
#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000)
#define OMAP4_SRAM_PUB_VA (OMAP4_SRAM_VA + 0x4000)
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2PLUS)
#define SRAM_BOOTLOADER_SZ 0x00
#else
#define SRAM_BOOTLOADER_SZ 0x80
*/
static int is_sram_locked(void)
{
- int type = 0;
-
- if (cpu_is_omap44xx())
- /* Not yet supported */
- return 0;
-
- if (cpu_is_omap242x())
- type = omap_rev() & OMAP2_DEVICETYPE_MASK;
-
- if (type == GP_DEVICE) {
+ if (OMAP2_DEVICE_TYPE_GP == omap_type()) {
/* RAMFW: R/W access to all initiators for all qualifier sets */
if (cpu_is_omap242x()) {
__raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */
host->slots[id] = slot;
mmc->caps = 0;
- if (host->pdata->slots[id].wires >= 4)
+ if (host->pdata->slots[id].caps & MMC_CAP_8_BIT_DATA)
mmc->caps |= MMC_CAP_4_BIT_DATA;
mmc->ops = &mmc_omap_ops;
mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
MMC_CAP_WAIT_WHILE_BUSY | MMC_CAP_ERASE;
- switch (mmc_slot(host).wires) {
- case 8:
- mmc->caps |= MMC_CAP_8_BIT_DATA;
- /* Fall through */
- case 4:
+ mmc->caps |= mmc_slot(host).caps;
+ if (mmc->caps & MMC_CAP_8_BIT_DATA)
mmc->caps |= MMC_CAP_4_BIT_DATA;
- break;
- case 1:
- /* Nothing to crib here */
- case 0:
- /* Assuming nothing was given by board, Core use's 1-Bit */
- break;
- default:
- /* Completely unexpected.. Core goes with 1-Bit Width */
- dev_crit(mmc_dev(host->mmc), "Invalid width %d\n used!"
- "using 1 instead\n", mmc_slot(host).wires);
- }
if (mmc_slot(host).nonremovable)
mmc->caps |= MMC_CAP_NONREMOVABLE;
projects / mv-sheeva.git / commitdiff