lsm: [[subj_user=] [subj_role=] [subj_type=]
[obj_user=] [obj_role=] [obj_type=]]
- base: func:= [BPRM_CHECK][FILE_MMAP][INODE_PERMISSION]
+ base: func:= [BPRM_CHECK][FILE_MMAP][FILE_CHECK]
mask:= [MAY_READ] [MAY_WRITE] [MAY_APPEND] [MAY_EXEC]
fsmagic:= hex value
uid:= decimal value
measure func=BPRM_CHECK
measure func=FILE_MMAP mask=MAY_EXEC
- measure func=INODE_PERM mask=MAY_READ uid=0
+ measure func=FILE_CHECK mask=MAY_READ uid=0
The default policy measures all executables in bprm_check,
all files mmapped executable in file_mmap, and all files
- open for read by root in inode_permission.
+ open for read by root in do_filp_open.
Examples of LSM specific definitions:
dont_measure obj_type=var_log_t
dont_measure obj_type=auditd_log_t
- measure subj_user=system_u func=INODE_PERM mask=MAY_READ
- measure subj_role=system_r func=INODE_PERM mask=MAY_READ
+ measure subj_user=system_u func=FILE_CHECK mask=MAY_READ
+ measure subj_role=system_r func=FILE_CHECK mask=MAY_READ
Smack:
- measure subj_user=_ func=INODE_PERM mask=MAY_READ
+ measure subj_user=_ func=FILE_CHECK mask=MAY_READ
up_threshold: defines what the average CPU usage between the samplings
of 'sampling_rate' needs to be for the kernel to make a decision on
whether it should increase the frequency. For example when it is set
-to its default value of '80' it means that between the checking
-intervals the CPU needs to be on average more than 80% in use to then
+to its default value of '95' it means that between the checking
+intervals the CPU needs to be on average more than 95% in use to then
decide that the CPU frequency needs to be increased.
ignore_nice_load: this parameter takes a value of '0' or '1'. When
bbootsect
bin2c
binkernel.spec
-binoffset
bootsect
bounds.h
bsetup
failslab, fail_page_alloc, and fail_make_request use this way.
Helper functions:
- init_fault_attr_entries(entries, attr, name);
- void cleanup_fault_attr_entries(entries);
+ init_fault_attr_dentries(entries, attr, name);
+ void cleanup_fault_attr_dentries(entries);
- module parameters
acpi_display_output=video
See above.
+ acpi_early_pdc_eval [HW,ACPI] Evaluate processor _PDC methods
+ early. Needed on some platforms to properly
+ initialize the EC.
+
acpi_irq_balance [HW,ACPI]
ACPI will balance active IRQs
default in APIC mode
aic79xx= [HW,SCSI]
See Documentation/scsi/aic79xx.txt.
+ alignment= [KNL,ARM]
+ Allow the default userspace alignment fault handler
+ behaviour to be specified. Bit 0 enables warnings,
+ bit 1 enables fixups, and bit 2 sends a segfault.
+
amd_iommu= [HW,X86-84]
Pass parameters to the AMD IOMMU driver in the system.
Possible values are:
#include <sys/uio.h>
#include <termios.h>
#include <getopt.h>
-#include <zlib.h>
#include <assert.h>
#include <sched.h>
#include <limits.h>
Default: 5
max_addresses - INTEGER
- Number of maximum addresses per interface. 0 disables limitation.
- It is recommended not set too large value (or 0) because it would
- be too easy way to crash kernel to allow to create too much of
- autoconfigured addresses.
+ Maximum number of autoconfigured addresses per interface. Setting
+ to zero disables the limitation. It is not recommended to set this
+ value too large (or to zero) because it would be an easy way to
+ crash the kernel by allowing too many addresses to be created.
Default: 16
disable_ipv6 - BOOLEAN
function tracer guts
====================
+ By Mike Frysinger
Introduction
------------
unsigned long *frompc = &...;
unsigned long selfpc = <return address> - MCOUNT_INSN_SIZE;
- prepare_ftrace_return(frompc, selfpc);
+ /* passing frame pointer up is optional -- see below */
+ prepare_ftrace_return(frompc, selfpc, frame_pointer);
/* restore all state needed by the ABI */
}
#endif
-For information on how to implement prepare_ftrace_return(), simply look at
-the x86 version. The only architecture-specific piece in it is the setup of
+For information on how to implement prepare_ftrace_return(), simply look at the
+x86 version (the frame pointer passing is optional; see the next section for
+more information). The only architecture-specific piece in it is the setup of
the fault recovery table (the asm(...) code). The rest should be the same
across architectures.
#endif
+HAVE_FUNCTION_GRAPH_FP_TEST
+---------------------------
+
+An arch may pass in a unique value (frame pointer) to both the entering and
+exiting of a function. On exit, the value is compared and if it does not
+match, then it will panic the kernel. This is largely a sanity check for bad
+code generation with gcc. If gcc for your port sanely updates the frame
+pointer under different opitmization levels, then ignore this option.
+
+However, adding support for it isn't terribly difficult. In your assembly code
+that calls prepare_ftrace_return(), pass the frame pointer as the 3rd argument.
+Then in the C version of that function, do what the x86 port does and pass it
+along to ftrace_push_return_trace() instead of a stub value of 0.
+
+Similarly, when you call ftrace_return_to_handler(), pass it the frame pointer.
+
+
HAVE_FTRACE_NMI_ENTER
---------------------
# echo sys_nanosleep hrtimer_interrupt \
> set_ftrace_filter
- # echo ftrace > current_tracer
+ # echo function > current_tracer
# echo 1 > tracing_enabled
# usleep 1
# echo 0 > tracing_enabled
S: Maintained
ARM/CORTINA SYSTEMS GEMINI ARM ARCHITECTURE
-M: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+M: Paulius Zaleckas <paulius.zaleckas@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
T: git git://gitorious.org/linux-gemini/mainline.git
-S: Maintained
+S: Odd Fixes
F: arch/arm/mach-gemini/
ARM/EBSA110 MACHINE SUPPORT
F: arch/arm/mach-pxa/ezx.c
ARM/FARADAY FA526 PORT
-M: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+M: Paulius Zaleckas <paulius.zaleckas@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
+S: Odd Fixes
F: arch/arm/mm/*-fa*
ARM/FOOTBRIDGE ARCHITECTURE
F: net/dccp/
DECnet NETWORK LAYER
-M: Christine Caulfield <christine.caulfield@googlemail.com>
W: http://linux-decnet.sourceforge.net
L: linux-decnet-user@lists.sourceforge.net
-S: Maintained
+S: Orphan
F: Documentation/networking/decnet.txt
F: net/decnet/
S: Odd Fixes
F: drivers/char/hvc_*
+VIRTIO CONSOLE DRIVER
+M: Amit Shah <amit.shah@redhat.com>
+L: virtualization@lists.linux-foundation.org
+S: Maintained
+F: drivers/char/virtio_console.c
+
GSPCA FINEPIX SUBDRIVER
M: Frank Zago <frank@zago.net>
L: linux-media@vger.kernel.org
F: drivers/scsi/sym53c8xx_2/
LTP (Linux Test Project)
-M: Subrata Modak <subrata@linux.vnet.ibm.com>
-M: Mike Frysinger <vapier@gentoo.org>
+M: Rishikesh K Rajak <risrajak@linux.vnet.ibm.com>
+M: Garrett Cooper <yanegomi@gmail.com>
+M: Mike Frysinger <vapier@gentoo.org>
+M: Subrata Modak <subrata@linux.vnet.ibm.com>
L: ltp-list@lists.sourceforge.net (subscribers-only)
W: http://ltp.sourceforge.net/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/galak/ltp.git
F: drivers/net/wireless/libertas/
MARVELL MV643XX ETHERNET DRIVER
-M: Lennert Buytenhek <buytenh@marvell.com>
+M: Lennert Buytenhek <buytenh@wantstofly.org>
L: netdev@vger.kernel.org
-S: Supported
+S: Maintained
F: drivers/net/mv643xx_eth.*
F: include/linux/mv643xx.h
L: netdev@vger.kernel.org
W: http://www.linuxfoundation.org/en/Net
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6.git
S: Odd Fixes
F: drivers/net/
F: include/linux/if_*
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 33
-EXTRAVERSION = -rc6
+EXTRAVERSION =
NAME = Man-Eating Seals of Antiquity
# *DOCUMENTATION*
select ARCH_HAS_CPUFREQ
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
+ select ARCH_HAS_HOLES_MEMORYMODEL
help
Support for TI's OMAP platform (OMAP1 and OMAP2).
endif
ifeq ($(CONFIG_THUMB2_KERNEL),y)
-AFLAGS_AUTOIT :=$(call as-option,-Wa$(comma)-mimplicit-it=thumb,-Wa$(comma)-mauto-it)
+AFLAGS_AUTOIT :=$(call as-option,-Wa$(comma)-mimplicit-it=always,-Wa$(comma)-mauto-it)
AFLAGS_NOWARN :=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
CFLAGS_THUMB2 :=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)
AFLAGS_THUMB2 :=$(CFLAGS_THUMB2) -Wa$(comma)-mthumb
#endif
#if defined(CONFIG_CPU_ARM920T) || defined(CONFIG_CPU_ARM922T) || \
- defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020)
+ defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020) || \
+ defined(CONFIG_CPU_ARM1026)
# define MULTI_CACHE 1
#endif
#endif
#ifdef CONFIG_OUTER_CACHE
struct outer_cache_fns outer_cache;
+EXPORT_SYMBOL(outer_cache);
#endif
struct stack {
unsigned int reg_both, reg_level, reg_type;
reg_type = __raw_readl(base + GPIO_INT_TYPE);
- reg_level = __raw_readl(base + GPIO_INT_BOTH_EDGE);
+ reg_level = __raw_readl(base + GPIO_INT_LEVEL);
reg_both = __raw_readl(base + GPIO_INT_BOTH_EDGE);
switch (type) {
}
__raw_writel(reg_type, base + GPIO_INT_TYPE);
- __raw_writel(reg_level, base + GPIO_INT_BOTH_EDGE);
+ __raw_writel(reg_level, base + GPIO_INT_LEVEL);
__raw_writel(reg_both, base + GPIO_INT_BOTH_EDGE);
gpio_ack_irq(irq);
return get_rate_per(8);
}
+static unsigned long get_rate_gpt(struct clk *clk)
+{
+ return get_rate_per(5);
+}
+
static unsigned long get_rate_otg(struct clk *clk)
{
return 48000000; /* FIXME */
__raw_writel(reg, clk->enable_reg);
}
-#define DEFINE_CLOCK(name, i, er, es, gr, sr) \
+#define DEFINE_CLOCK(name, i, er, es, gr, sr, s) \
static struct clk name = { \
.id = i, \
.enable_reg = CRM_BASE + er, \
.set_rate = sr, \
.enable = clk_cgcr_enable, \
.disable = clk_cgcr_disable, \
+ .secondary = s, \
}
-DEFINE_CLOCK(gpt_clk, 0, CCM_CGCR0, 5, get_rate_ipg, NULL);
-DEFINE_CLOCK(cspi1_clk, 0, CCM_CGCR1, 5, get_rate_ipg, NULL);
-DEFINE_CLOCK(cspi2_clk, 0, CCM_CGCR1, 6, get_rate_ipg, NULL);
-DEFINE_CLOCK(cspi3_clk, 0, CCM_CGCR1, 7, get_rate_ipg, NULL);
-DEFINE_CLOCK(uart1_clk, 0, CCM_CGCR2, 14, get_rate_uart, NULL);
-DEFINE_CLOCK(uart2_clk, 0, CCM_CGCR2, 15, get_rate_uart, NULL);
-DEFINE_CLOCK(uart3_clk, 0, CCM_CGCR2, 16, get_rate_uart, NULL);
-DEFINE_CLOCK(uart4_clk, 0, CCM_CGCR2, 17, get_rate_uart, NULL);
-DEFINE_CLOCK(uart5_clk, 0, CCM_CGCR2, 18, get_rate_uart, NULL);
-DEFINE_CLOCK(nfc_clk, 0, CCM_CGCR0, 8, get_rate_nfc, NULL);
-DEFINE_CLOCK(usbotg_clk, 0, CCM_CGCR0, 28, get_rate_otg, NULL);
-DEFINE_CLOCK(pwm1_clk, 0, CCM_CGCR1, 31, get_rate_ipg, NULL);
-DEFINE_CLOCK(pwm2_clk, 0, CCM_CGCR2, 0, get_rate_ipg, NULL);
-DEFINE_CLOCK(pwm3_clk, 0, CCM_CGCR2, 1, get_rate_ipg, NULL);
-DEFINE_CLOCK(pwm4_clk, 0, CCM_CGCR2, 2, get_rate_ipg, NULL);
-DEFINE_CLOCK(kpp_clk, 0, CCM_CGCR1, 28, get_rate_ipg, NULL);
-DEFINE_CLOCK(tsc_clk, 0, CCM_CGCR2, 13, get_rate_ipg, NULL);
-DEFINE_CLOCK(i2c_clk, 0, CCM_CGCR0, 6, get_rate_i2c, NULL);
-DEFINE_CLOCK(fec_clk, 0, CCM_CGCR0, 23, get_rate_ipg, NULL);
+DEFINE_CLOCK(gpt_clk, 0, CCM_CGCR0, 5, get_rate_gpt, NULL, NULL);
+DEFINE_CLOCK(uart_per_clk, 0, CCM_CGCR0, 15, get_rate_uart, NULL, NULL);
+DEFINE_CLOCK(cspi1_clk, 0, CCM_CGCR1, 5, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(cspi2_clk, 0, CCM_CGCR1, 6, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(cspi3_clk, 0, CCM_CGCR1, 7, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(fec_ahb_clk, 0, CCM_CGCR0, 23, NULL, NULL, NULL);
+DEFINE_CLOCK(uart1_clk, 0, CCM_CGCR2, 14, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart2_clk, 0, CCM_CGCR2, 15, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart3_clk, 0, CCM_CGCR2, 16, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart4_clk, 0, CCM_CGCR2, 17, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart5_clk, 0, CCM_CGCR2, 18, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(nfc_clk, 0, CCM_CGCR0, 8, get_rate_nfc, NULL, NULL);
+DEFINE_CLOCK(usbotg_clk, 0, CCM_CGCR0, 28, get_rate_otg, NULL, NULL);
+DEFINE_CLOCK(pwm1_clk, 0, CCM_CGCR1, 31, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(pwm2_clk, 0, CCM_CGCR2, 0, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(pwm3_clk, 0, CCM_CGCR2, 1, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(pwm4_clk, 0, CCM_CGCR2, 2, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(kpp_clk, 0, CCM_CGCR1, 28, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(tsc_clk, 0, CCM_CGCR2, 13, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(i2c_clk, 0, CCM_CGCR0, 6, get_rate_i2c, NULL, NULL);
+DEFINE_CLOCK(fec_clk, 0, CCM_CGCR1, 15, get_rate_ipg, NULL, &fec_ahb_clk);
#define _REGISTER_CLOCK(d, n, c) \
{ \
_REGISTER_CLOCK("fec.0", NULL, fec_clk)
};
-int __init mx25_clocks_init(unsigned long fref)
+int __init mx25_clocks_init(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(lookups); i++)
clkdev_add(&lookups[i]);
+ /* Turn off all clocks except the ones we need to survive, namely:
+ * EMI, GPIO1-3 (CCM_CGCR1[18:16]), GPT1, IOMUXC (CCM_CGCR1[27]), IIM,
+ * SCC
+ */
+ __raw_writel((1 << 19), CRM_BASE + CCM_CGCR0);
+ __raw_writel((0xf << 16) | (3 << 26), CRM_BASE + CCM_CGCR1);
+ __raw_writel((1 << 5), CRM_BASE + CCM_CGCR2);
+
mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
return 0;
static void __init mx25pdk_timer_init(void)
{
- mx25_clocks_init(26000000);
+ mx25_clocks_init();
}
static struct sys_timer mx25pdk_timer = {
}
static struct irq_chip expio_irq_chip = {
+ .name = "EXPIO(CPLD)",
.ack = expio_ack_irq,
.mask = expio_mask_irq,
.unmask = expio_unmask_irq,
.min_uV = 2800000,
.max_uV = 2800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
.apply_uV = 1,
},
};
.min_uV = 3300000,
.max_uV = 3300000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
.apply_uV = 1,
},
.num_consumer_supplies = ARRAY_SIZE(ldo2_consumers),
static struct wm8350_platform_data __initdata mx31_wm8350_pdata = {
.init = mx31_wm8350_init,
+ .irq_base = MXC_BOARD_IRQ_START + MXC_MAX_EXP_IO_LINES,
};
#endif
void __init gpmc_init(void)
{
u32 l;
- char *ck;
+ char *ck = NULL;
if (cpu_is_omap24xx()) {
ck = "core_l3_ck";
l = OMAP44XX_GPMC_BASE;
}
+ if (WARN_ON(!ck))
+ return;
+
gpmc_l3_clk = clk_get(NULL, ck);
if (IS_ERR(gpmc_l3_clk)) {
printk(KERN_ERR "Could not get GPMC clock %s\n", ck);
int i;
for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
- unsigned long base;
+ unsigned long base = 0;
struct omap_irq_bank *bank = irq_banks + i;
if (cpu_is_omap24xx())
else if (cpu_is_omap34xx())
base = OMAP34XX_IC_BASE;
+ BUG_ON(!base);
+
/* Static mapping, never released */
bank->base_reg = ioremap(base, SZ_4K);
if (!bank->base_reg) {
{
struct twl4030_hsmmc_info *c;
int nr_hsmmc = ARRAY_SIZE(hsmmc_data);
+ int i;
if (cpu_is_omap2430()) {
control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE;
mmc = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL);
if (!mmc) {
pr_err("Cannot allocate memory for mmc device!\n");
- return;
+ goto done;
}
if (c->name)
continue;
c->dev = mmc->dev;
}
+
+done:
+ for (i = 0; i < nr_hsmmc; i++)
+ kfree(hsmmc_data[i]);
}
#endif
static inline void omap_mux_decode(struct seq_file *s, u16 val)
{
char *flags[OMAP_MUX_MAX_NR_FLAGS];
- char mode[14];
+ char mode[sizeof("OMAP_MUX_MODE") + 1];
int i = -1;
sprintf(mode, "OMAP_MUX_MODE%d", val & 0x7);
if (!m0_name)
continue;
+ /* REVISIT: Needs to be updated if mode0 names get longer */
for (i = 0; i < OMAP_MUX_DEFNAME_LEN; i++) {
if (m0_name[i] == '\0') {
m0_def[i] = m0_name[i];
while (superset->reg_offset != OMAP_MUX_TERMINATOR) {
struct omap_mux *entry;
-#ifndef CONFIG_OMAP_MUX
+#ifdef CONFIG_OMAP_MUX
+ if (!superset->muxnames || !superset->muxnames[0]) {
+ superset++;
+ continue;
+ }
+#else
/* Skip pins that are not muxed as GPIO by bootloader */
if (!OMAP_MODE_GPIO(omap_mux_read(superset->reg_offset))) {
superset++;
_OMAP3_MUXENTRY(UART3_TX_IRTX, 166,
"uart3_tx_irtx", NULL, NULL, NULL,
"gpio_166", NULL, NULL, "safe_mode"),
+
+ /* Only on 3630, see omap36xx_cbp_subset for the signals */
+ _OMAP3_MUXENTRY(GPMC_A11, 0,
+ NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_MBUSFLAG, 0,
+ NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_MREAD, 0,
+ NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_MWRITE, 0,
+ NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_SBUSFLAG, 0,
+ NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_SREAD, 0,
+ NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_SWRITE, 0,
+ NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(GPMC_A11, 0,
+ NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_MCAD28, 0,
+ NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_MCAD29, 0,
+ NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_MCAD32, 0,
+ NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_MCAD33, 0,
+ NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_MCAD34, 0,
+ NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_MCAD35, 0,
+ NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_MCAD36, 0,
+ NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV 0x52
#define UART_OMAP_WER 0x17 /* Wake-up enable register */
-#define DEFAULT_TIMEOUT (5 * HZ)
+/*
+ * NOTE: By default the serial timeout is disabled as it causes lost characters
+ * over the serial ports. This means that the UART clocks will stay on until
+ * disabled via sysfs. This also causes that any deeper omap sleep states are
+ * blocked.
+ */
+#define DEFAULT_TIMEOUT 0
struct omap_uart_state {
int num;
uart->timeout = DEFAULT_TIMEOUT;
setup_timer(&uart->timer, omap_uart_idle_timer,
(unsigned long) uart);
- mod_timer(&uart->timer, jiffies + uart->timeout);
+ if (uart->timeout)
+ mod_timer(&uart->timer, jiffies + uart->timeout);
omap_uart_smart_idle_enable(uart, 0);
if (cpu_is_omap34xx()) {
* in the system FPGA
*/
__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
- __raw_writel(0x0000, reset_ctrl);
- __raw_writel(0x0004, reset_ctrl);
+ __raw_writel(0x00F0, reset_ctrl);
+ __raw_writel(0x00F4, reset_ctrl);
}
static void __init realview_pbx_init(void)
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/moduleparam.h>
#include <linux/compiler.h>
#include <linux/kernel.h>
#include <linux/errno.h>
static unsigned long ai_multi;
static int ai_usermode;
+core_param(alignment, ai_usermode, int, 0600);
+
#define UM_WARN (1 << 0)
#define UM_FIXUP (1 << 1)
#define UM_SIGNAL (1 << 2)
ENTRY(cpu_arm7_data_abort)
mrc p15, 0, r1, c5, c0, 0 @ get FSR
mrc p15, 0, r0, c6, c0, 0 @ get FAR
- ldr r8, [r0] @ read arm instruction
+ ldr r8, [r2] @ read arm instruction
tst r8, #1 << 20 @ L = 0 -> write?
orreq r1, r1, #1 << 11 @ yes.
and r7, r8, #15 << 24
#include <linux/err.h>
#include <linux/io.h>
#include <linux/clk.h>
+#include <linux/debugfs.h>
#include <mach/audmux.h>
#include <mach/hardware.h>
#define MXC_AUDMUX_V2_PTCR(x) ((x) * 8)
#define MXC_AUDMUX_V2_PDCR(x) ((x) * 8 + 4)
+#ifdef CONFIG_DEBUG_FS
+static struct dentry *audmux_debugfs_root;
+
+static int audmux_open_file(struct inode *inode, struct file *file)
+{
+ file->private_data = inode->i_private;
+ return 0;
+}
+
+/* There is an annoying discontinuity in the SSI numbering with regard
+ * to the Linux number of the devices */
+static const char *audmux_port_string(int port)
+{
+ switch (port) {
+ case MX31_AUDMUX_PORT1_SSI0:
+ return "imx-ssi.0";
+ case MX31_AUDMUX_PORT2_SSI1:
+ return "imx-ssi.1";
+ case MX31_AUDMUX_PORT3_SSI_PINS_3:
+ return "SSI3";
+ case MX31_AUDMUX_PORT4_SSI_PINS_4:
+ return "SSI4";
+ case MX31_AUDMUX_PORT5_SSI_PINS_5:
+ return "SSI5";
+ case MX31_AUDMUX_PORT6_SSI_PINS_6:
+ return "SSI6";
+ default:
+ return "UNKNOWN";
+ }
+}
+
+static ssize_t audmux_read_file(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ ssize_t ret;
+ char *buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
+ int port = (int)file->private_data;
+ u32 pdcr, ptcr;
+
+ if (!buf)
+ return -ENOMEM;
+
+ if (audmux_clk)
+ clk_enable(audmux_clk);
+
+ ptcr = readl(audmux_base + MXC_AUDMUX_V2_PTCR(port));
+ pdcr = readl(audmux_base + MXC_AUDMUX_V2_PDCR(port));
+
+ if (audmux_clk)
+ clk_disable(audmux_clk);
+
+ ret = snprintf(buf, PAGE_SIZE, "PDCR: %08x\nPTCR: %08x\n",
+ pdcr, ptcr);
+
+ if (ptcr & MXC_AUDMUX_V2_PTCR_TFSDIR)
+ ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ "TxFS output from %s, ",
+ audmux_port_string((ptcr >> 27) & 0x7));
+ else
+ ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ "TxFS input, ");
+
+ if (ptcr & MXC_AUDMUX_V2_PTCR_TCLKDIR)
+ ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ "TxClk output from %s",
+ audmux_port_string((ptcr >> 22) & 0x7));
+ else
+ ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ "TxClk input");
+
+ ret += snprintf(buf + ret, PAGE_SIZE - ret, "\n");
+
+ if (ptcr & MXC_AUDMUX_V2_PTCR_SYN) {
+ ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ "Port is symmetric");
+ } else {
+ if (ptcr & MXC_AUDMUX_V2_PTCR_RFSDIR)
+ ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ "RxFS output from %s, ",
+ audmux_port_string((ptcr >> 17) & 0x7));
+ else
+ ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ "RxFS input, ");
+
+ if (ptcr & MXC_AUDMUX_V2_PTCR_RCLKDIR)
+ ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ "RxClk output from %s",
+ audmux_port_string((ptcr >> 12) & 0x7));
+ else
+ ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ "RxClk input");
+ }
+
+ ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ "\nData received from %s\n",
+ audmux_port_string((pdcr >> 13) & 0x7));
+
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret);
+
+ kfree(buf);
+
+ return ret;
+}
+
+static const struct file_operations audmux_debugfs_fops = {
+ .open = audmux_open_file,
+ .read = audmux_read_file,
+};
+
+static void audmux_debugfs_init(void)
+{
+ int i;
+ char buf[20];
+
+ audmux_debugfs_root = debugfs_create_dir("audmux", NULL);
+ if (!audmux_debugfs_root) {
+ pr_warning("Failed to create AUDMUX debugfs root\n");
+ return;
+ }
+
+ for (i = 1; i < 8; i++) {
+ snprintf(buf, sizeof(buf), "ssi%d", i);
+ if (!debugfs_create_file(buf, 0444, audmux_debugfs_root,
+ (void *)i, &audmux_debugfs_fops))
+ pr_warning("Failed to create AUDMUX port %d debugfs file\n",
+ i);
+ }
+}
+#else
+static inline void audmux_debugfs_init(void)
+{
+}
+#endif
+
int mxc_audmux_v2_configure_port(unsigned int port, unsigned int ptcr,
unsigned int pdcr)
{
if (cpu_is_mx31() || cpu_is_mx35())
audmux_base = IO_ADDRESS(AUDMUX_BASE_ADDR);
+ audmux_debugfs_init();
+
return 0;
}
#ifndef __ASSEMBLY__
-enum mx31lilly_boards {
+enum mx31lite_boards {
MX31LITE_NOBOARD = 0,
MX31LITE_DB = 1,
};
extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
extern int mx1_clocks_init(unsigned long fref);
extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
-extern int mx25_clocks_init(unsigned long fref);
+extern int mx25_clocks_init(void);
extern int mx27_clocks_init(unsigned long fref);
extern int mx31_clocks_init(unsigned long fref);
extern int mx35_clocks_init(void);
#define MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8 IOMUX_PAD(0x634, 0x1d0, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD9__IPU_DISPB_DAT_9 IOMUX_PAD(0x638, 0x1d4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD9__GPIO2_9 IOMUX_PAD(0x638, 0x1d4, 5, 0x8e4 0, NO_PAD_CTRL)
+#define MX35_PAD_LD9__GPIO2_9 IOMUX_PAD(0x638, 0x1d4, 5, 0x8e4, 0, NO_PAD_CTRL)
#define MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9 IOMUX_PAD(0x638, 0x1d4, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD10__IPU_DISPB_DAT_10 IOMUX_PAD(0x63c, 0x1d8, 0, 0x0, 0, NO_PAD_CTRL)
* within sensible limits.
*/
#define MXC_BOARD_IRQ_START (MXC_INTERNAL_IRQS + MXC_GPIO_IRQS)
+
+#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
+#define MXC_BOARD_IRQS 80
+#else
#define MXC_BOARD_IRQS 16
+#endif
#define MXC_IPU_IRQ_START (MXC_BOARD_IRQ_START + MXC_BOARD_IRQS)
static int clk_debugfs_register_one(struct clk *c)
{
int err;
- struct dentry *d, *child;
+ struct dentry *d, *child, *child_tmp;
struct clk *pa = c->parent;
char s[255];
char *p = s;
err_out:
d = c->dent;
- list_for_each_entry(child, &d->d_subdirs, d_u.d_child)
+ list_for_each_entry_safe(child, child_tmp, &d->d_subdirs, d_u.d_child)
debugfs_remove(child);
debugfs_remove(c->dent);
return err;
}
#endif
+#ifdef CONFIG_ARCH_OMAP1
/*
* This only applies to chips that can't do both rising and falling edge
* detection at once. For all other chips, this function is a noop.
u32 l = 0;
switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
case METHOD_MPUIO:
reg += OMAP_MPUIO_GPIO_INT_EDGE;
break;
-#endif
#ifdef CONFIG_ARCH_OMAP15XX
case METHOD_GPIO_1510:
reg += OMAP1510_GPIO_INT_CONTROL;
__raw_writel(l, reg);
}
+#endif
static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
{
#define USE_WAKEUP_LAT 0
#define IGNORE_WAKEUP_LAT 1
-/* XXX this should be moved into a separate file */
-#if defined(CONFIG_ARCH_OMAP2420)
-# define OMAP_32KSYNCT_BASE 0x48004000
-#elif defined(CONFIG_ARCH_OMAP2430)
-# define OMAP_32KSYNCT_BASE 0x49020000
-#elif defined(CONFIG_ARCH_OMAP3430)
-# define OMAP_32KSYNCT_BASE 0x48320000
-#else
-# error Unknown OMAP device
-#endif
/* Private functions */
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Thu Jan 28 22:15:54 2010
+# Last update: Sat Feb 20 14:16:15 2010
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
oratismadi MACH_ORATISMADI ORATISMADI 2269
oratisot16 MACH_ORATISOT16 ORATISOT16 2270
oratisdesk MACH_ORATISDESK ORATISDESK 2271
-v2_ca9 MACH_V2P_CA9 V2P_CA9 2272
+vexpress MACH_VEXPRESS VEXPRESS 2272
sintexo MACH_SINTEXO SINTEXO 2273
cm3389 MACH_CM3389 CM3389 2274
omap3_cio MACH_OMAP3_CIO OMAP3_CIO 2275
dm365_leopard MACH_DM365_LEOPARD DM365_LEOPARD 2649
mityomapl138 MACH_MITYOMAPL138 MITYOMAPL138 2650
scat110 MACH_SCAT110 SCAT110 2651
+acer_a1 MACH_ACER_A1 ACER_A1 2652
+cmcontrol MACH_CMCONTROL CMCONTROL 2653
+pelco_lamar MACH_PELCO_LAMAR PELCO_LAMAR 2654
+rfp43 MACH_RFP43 RFP43 2655
+sk86r0301 MACH_SK86R0301 SK86R0301 2656
+ctpxa MACH_CTPXA CTPXA 2657
+epb_arm9_a MACH_EPB_ARM9_A EPB_ARM9_A 2658
+guruplug MACH_GURUPLUG GURUPLUG 2659
+spear310 MACH_SPEAR310 SPEAR310 2660
+spear320 MACH_SPEAR320 SPEAR320 2661
+robotx MACH_ROBOTX ROBOTX 2662
+lsxhl MACH_LSXHL LSXHL 2663
+smartlite MACH_SMARTLITE SMARTLITE 2664
+cws2 MACH_CWS2 CWS2 2665
+m619 MACH_M619 M619 2666
+smartview MACH_SMARTVIEW SMARTVIEW 2667
+lsa_salsa MACH_LSA_SALSA LSA_SALSA 2668
+kizbox MACH_KIZBOX KIZBOX 2669
+htccharmer MACH_HTCCHARMER HTCCHARMER 2670
+guf_neso_lt MACH_GUF_NESO_LT GUF_NESO_LT 2671
+pm9g45 MACH_PM9G45 PM9G45 2672
+htcpanther MACH_HTCPANTHER HTCPANTHER 2673
+htcpanther_cdma MACH_HTCPANTHER_CDMA HTCPANTHER_CDMA 2674
+reb01 MACH_REB01 REB01 2675
+aquila MACH_AQUILA AQUILA 2676
+spark_sls_hw2 MACH_SPARK_SLS_HW2 SPARK_SLS_HW2 2677
+sheeva_esata MACH_ESATA_SHEEVAPLUG ESATA_SHEEVAPLUG 2678
+surf7x30 MACH_SURF7X30 SURF7X30 2679
+micro2440 MACH_MICRO2440 MICRO2440 2680
+am2440 MACH_AM2440 AM2440 2681
+tq2440 MACH_TQ2440 TQ2440 2682
+lpc2478oem MACH_LPC2478OEM LPC2478OEM 2683
+ak880x MACH_AK880X AK880X 2684
+cobra3530 MACH_COBRA3530 COBRA3530 2685
+pmppb MACH_PMPPB PMPPB 2686
+u6715 MACH_U6715 U6715 2687
+axar1500_sender MACH_AXAR1500_SENDER AXAR1500_SENDER 2688
+g30_dvb MACH_G30_DVB G30_DVB 2689
+vc088x MACH_VC088X VC088X 2690
+mioa702 MACH_MIOA702 MIOA702 2691
+hpmin MACH_HPMIN HPMIN 2692
+ak880xak MACH_AK880XAK AK880XAK 2693
}
/*
- * Update the FPSCR with the additional exception flags.
+ * If any of the status flags are set, update the FPSCR.
* Comparison instructions always return at least one of
* these flags set.
*/
+ if (exceptions & (FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V))
+ fpscr &= ~(FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V);
+
fpscr |= exceptions;
fmxr(FPSCR, fpscr);
at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
{
struct platform_device *pdev;
- struct mci_dma_slave *slave;
+ struct mci_dma_data *slave;
u32 pioa_mask;
u32 piob_mask;
ARRAY_SIZE(atmel_mci0_resource)))
goto fail;
- slave = kzalloc(sizeof(struct mci_dma_slave), GFP_KERNEL);
+ slave = kzalloc(sizeof(struct mci_dma_data), GFP_KERNEL);
+ if (!slave)
+ goto fail;
slave->sdata.dma_dev = &dw_dmac0_device.dev;
slave->sdata.reg_width = DW_DMA_SLAVE_WIDTH_32BIT;
if (platform_device_add_data(pdev, data,
sizeof(struct mci_platform_data)))
- goto fail;
+ goto fail_free;
/* CLK line is common to both slots */
pioa_mask = 1 << 10;
/* Slot is unused */
break;
default:
- goto fail;
+ goto fail_free;
}
select_peripheral(PIOA, pioa_mask, PERIPH_A, 0);
break;
default:
if (!data->slot[0].bus_width)
- goto fail;
+ goto fail_free;
data->slot[1].bus_width = 0;
break;
platform_device_add(pdev);
return pdev;
+fail_free:
+ kfree(slave);
fail:
data->dma_slave = NULL;
- kfree(slave);
platform_device_put(pdev);
return NULL;
}
#define acpi_noirq 0 /* ACPI always enabled on IA64 */
#define acpi_pci_disabled 0 /* ACPI PCI always enabled on IA64 */
#define acpi_strict 1 /* no ACPI spec workarounds on IA64 */
+#define acpi_ht 0 /* no HT-only mode on IA64 */
#endif
#define acpi_processor_cstate_check(x) (x) /* no idle limits on IA64 :) */
static inline void disable_acpi(void) { }
relevant until we have real hardware to play with... */
#define ELF_PLATFORM NULL
-#define SET_PERSONALITY(ex) set_personality(PER_LINUX)
+#define SET_PERSONALITY(ex) \
+ set_personality((current->personality & ~PER_MASK) | PER_LINUX)
+
#define elf_read_implies_exec(ex, executable_stack) \
((executable_stack!=EXSTACK_DISABLE_X) && ((ex).e_flags & EF_IA_64_LINUX_EXECUTABLE_STACK) != 0)
DEFINE_PER_CPU(struct sn_hub_info_s, __sn_hub_info);
EXPORT_PER_CPU_SYMBOL(__sn_hub_info);
-DEFINE_PER_CPU(short [MAX_COMPACT_NODES], __sn_cnodeid_to_nasid);
+DEFINE_PER_CPU(short, __sn_cnodeid_to_nasid[MAX_COMPACT_NODES]);
EXPORT_PER_CPU_SYMBOL(__sn_cnodeid_to_nasid);
DEFINE_PER_CPU(struct nodepda_s *, __sn_nodepda);
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 10:28:50 2009
+# Linux kernel version: 2.6.33-rc6
+# Wed Feb 3 10:02:59 2010
#
CONFIG_MICROBLAZE=y
# CONFIG_SWAP is not set
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_CSUM=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
# CONFIG_PCI is not set
CONFIG_NO_DMA=y
+CONFIG_DTC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_INITRAMFS_COMPRESSION_NONE is not set
CONFIG_INITRAMFS_COMPRESSION_GZIP=y
# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
+# CONFIG_INITRAMFS_COMPRESSION_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_AIO=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
#
# GCOV-based kernel profiling
#
-# CONFIG_SLOW_WORK is not set
+CONFIG_SLOW_WORK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=1
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
CONFIG_PLATFORM_GENERIC=y
CONFIG_OPT_LIB_FUNCTION=y
CONFIG_OPT_LIB_ASM=y
-CONFIG_ALLOW_EDIT_AUTO=y
-
-#
-# Automatic platform settings from Kconfig.auto
-#
#
# Definitions for MICROBLAZE0
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
-# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
CONFIG_XILINX_EMACLITE=y
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
#
# Kernel hacking
#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SLAB_LEAK is not set
CONFIG_DEBUG_SPINLOCK=y
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
-# CONFIG_KMEMCHECK is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_HEART_BEAT is not set
CONFIG_DEBUG_BOOTMEM=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 10:29:43 2009
+# Linux kernel version: 2.6.33-rc6
+# Wed Feb 3 10:03:21 2010
#
CONFIG_MICROBLAZE=y
# CONFIG_SWAP is not set
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_CSUM=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
# CONFIG_PCI is not set
CONFIG_NO_DMA=y
+CONFIG_DTC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_AIO=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_MMAP_ALLOW_UNINITIALIZED is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
#
# GCOV-based kernel profiling
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
CONFIG_PLATFORM_GENERIC=y
# CONFIG_SELFMOD is not set
# CONFIG_OPT_LIB_FUNCTION is not set
-# CONFIG_ALLOW_EDIT_AUTO is not set
+
+#
+# Definitions for MICROBLAZE0
+#
CONFIG_KERNEL_BASE_ADDR=0x90000000
CONFIG_XILINX_MICROBLAZE0_FAMILY="virtex5"
CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1
#
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_OF_PARTS is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
-# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
#
# Kernel hacking
#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_OBJECTS_SELFTEST=y
CONFIG_DEBUG_OBJECTS_FREE=y
CONFIG_DEBUG_OBJECTS_TIMERS=y
+# CONFIG_DEBUG_OBJECTS_WORK is not set
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
* Little endian
*/
-#define out_le32(a, v) __raw_writel(__cpu_to_le32(v), (a));
+#define out_le32(a, v) __raw_writel(__cpu_to_le32(v), (a))
#define out_le16(a, v) __raw_writew(__cpu_to_le16(v), (a))
#define in_le32(a) __le32_to_cpu(__raw_readl(a))
/* It is used only first parameter for OP - for wic, wdc */
#define CACHE_RANGE_LOOP_1(start, end, line_length, op) \
do { \
- int step = -line_length; \
- int count = end - start; \
- BUG_ON(count <= 0); \
+ int volatile temp; \
+ BUG_ON(end - start <= 0); \
\
- __asm__ __volatile__ (" 1: addk %0, %0, %1; \
- " #op " %0, r0; \
- bgtid %1, 1b; \
- addk %1, %1, %2; \
- " : : "r" (start), "r" (count), \
- "r" (step) : "memory"); \
+ __asm__ __volatile__ (" 1: " #op " %1, r0; \
+ cmpu %0, %1, %2; \
+ bgtid %0, 1b; \
+ addk %1, %1, %3; \
+ " : : "r" (temp), "r" (start), "r" (end),\
+ "r" (line_length) : "memory"); \
} while (0);
static void __flush_icache_range_msr_irq(unsigned long start, unsigned long end)
pr_debug("%s\n", __func__);
CACHE_ALL_LOOP2(cpuinfo.dcache_size, cpuinfo.dcache_line_length,
wdc.clear)
-
-#if 0
- unsigned int i;
-
- pr_debug("%s\n", __func__);
-
- /* Just loop through cache size and invalidate it */
- for (i = 0; i < cpuinfo.dcache_size; i += cpuinfo.dcache_line_length)
- __invalidate_dcache(0, i);
-#endif
}
static void __invalidate_dcache_range_wb(unsigned long start,
ret_from_intr:
lwi r11, r1, PT_MODE
- bneid r11, 3f
+ bneid r11, no_intr_resched
lwi r6, r31, TS_THREAD_INFO /* get thread info */
lwi r19, r6, TI_FLAGS /* get flags in thread info */
bralid r15, schedule
nop
1: andi r11, r19, _TIF_SIGPENDING
- beqid r11, no_intr_reshed
+ beqid r11, no_intr_resched
addk r5, r1, r0
addk r7, r0, r0
bralid r15, do_signal
addk r6, r0, r0
-no_intr_reshed:
+no_intr_resched:
+ /* Disable interrupts, we are now committed to the state restore */
+ disable_irq
+
/* save mode indicator */
lwi r11, r1, PT_MODE
-3:
swi r11, r0, PER_CPU(KM)
/* save r31 */
microblaze_cache_init();
+ invalidate_dcache();
enable_dcache();
invalidate_icache();
if (desc_base == 0)
return 0;
+ ctp->cdb_membase = desc_base;
desc_base = ALIGN_ADDR(desc_base, sizeof(au1x_ddma_desc_t));
- }
+ } else
+ ctp->cdb_membase = desc_base;
+
dp = (au1x_ddma_desc_t *)desc_base;
/* Keep track of the base descriptor. */
au1xxx_dbdma_stop(chanid);
- kfree((void *)ctp->chan_desc_base);
+ kfree((void *)ctp->cdb_membase);
stp->dev_flags &= ~DEV_FLAGS_INUSE;
dtp->dev_flags &= ~DEV_FLAGS_INUSE;
.name = "mem",
.flags = IORESOURCE_MEM,
.start = 0x03400000,
- .end = 0x034001fff,
+ .end = 0x03401fff,
},
};
break;
}
+ /* Ignoring the last page when ddr size is 128M. Cached
+ * accesses to last page is causing the processor to prefetch
+ * using address above 128M stepping out of the ddr address
+ * space.
+ */
+ if (mem == 0x8000000)
+ mem -= 0x1000;
+
add_memory_region(0, mem, BOOT_MEM_RAM);
}
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Tue Aug 7 13:04:24 2007
+# Linux kernel version: 2.6.33-rc6
+# Wed Feb 3 18:12:31 2010
#
CONFIG_MIPS=y
# Machine selection
#
# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_AR7 is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
-# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_LASAT is not set
+# CONFIG_MACH_LOONGSON is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_NEC_MARKEINS is not set
# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_POWERTV is not set
# CONFIG_SGI_IP22 is not set
CONFIG_SGI_IP27=y
+# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_SENTOSA is not set
# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
CONFIG_SGI_SN_M_MODE=y
# CONFIG_SGI_SN_N_MODE is not set
# CONFIG_MAPPED_KERNEL is not set
# CONFIG_REPLICATE_KTEXT is not set
# CONFIG_REPLICATE_EXHANDLERS is not set
+CONFIG_LOONGSON_UART_BASE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_ARC=y
CONFIG_DMA_COHERENT=y
-CONFIG_EARLY_PRINTK=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
# CONFIG_NO_IOPORT is not set
CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_DEFAULT_SGI_PARTITION=y
CONFIG_MIPS_L1_CACHE_SHIFT=7
CONFIG_ARC64=y
CONFIG_BOOT_ELF64=y
#
# CPU selection
#
-# CONFIG_CPU_LOONGSON2 is not set
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
# CONFIG_CPU_MIPS32_R1 is not set
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R8000 is not set
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
CONFIG_SYS_HAS_CPU_R10000=y
CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_MIPS_MT_DISABLED=y
CONFIG_IRQ_PER_CPU=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_NUMA=y
CONFIG_SYS_SUPPORTS_NUMA=y
CONFIG_NODES_SHIFT=6
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_SMP=y
CONFIG_SYS_SUPPORTS_SMP=y
CONFIG_NR_CPUS_DEFAULT_64=y
CONFIG_NR_CPUS=64
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
# CONFIG_MIPS_INSANE_LARGE is not set
# CONFIG_KEXEC is not set
CONFIG_SECCOMP=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=64
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=15
+# CONFIG_GROUP_SCHED is not set
CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+# CONFIG_CGROUP_NS is not set
+# CONFIG_CGROUP_FREEZER is not set
+# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
-CONFIG_SYSFS_DEPRECATED=y
+CONFIG_PROC_PID_CPUSET=y
+# CONFIG_CGROUP_CPUACCT is not set
+# CONFIG_RESOURCE_COUNTERS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_SYSCALL_WRAPPERS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
+CONFIG_SLOW_WORK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+# CONFIG_BLK_CGROUP is not set
+CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
+# CONFIG_CFQ_GROUP_IOSCHED is not set
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+# CONFIG_FREEZER is not set
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# Executable file formats
#
CONFIG_BINFMT_ELF=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
-# CONFIG_BUILD_ELF64 is not set
CONFIG_MIPS32_COMPAT=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
# Power management options
#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
-
-#
-# Networking
-#
+# CONFIG_PM_RUNTIME is not set
CONFIG_NET=y
+CONFIG_COMPAT_NETLINK_MESSAGES=y
#
# Networking options
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
+CONFIG_XFRM_STATISTICS=y
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_SIT_6RD=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_PIMSM_V2=y
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_FIFO=y
#
# Queueing/Scheduling
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RR=m
+CONFIG_NET_SCH_MULTIQ=y
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
+# CONFIG_NET_SCH_DRR is not set
CONFIG_NET_SCH_INGRESS=m
#
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=y
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
# CONFIG_NET_ACT_SIMP is not set
-CONFIG_NET_CLS_POLICE=y
+CONFIG_NET_ACT_SKBEDIT=m
# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-CONFIG_CFG80211=m
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
-# CONFIG_MAC80211_DEBUG is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
# CONFIG_NET_9P is not set
#
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_OSD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
+CONFIG_EEPROM_93CX6=m
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+CONFIG_SCSI_CXGB3_ISCSI=m
+CONFIG_SCSI_BNX2_ISCSI=m
+CONFIG_BE2ISCSI=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+CONFIG_SCSI_HPSA=m
# CONFIG_SCSI_3W_9XXX is not set
+CONFIG_SCSI_3W_SAS=m
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
+CONFIG_SCSI_MVSAS=m
+# CONFIG_SCSI_MVSAS_DEBUG is not set
+CONFIG_SCSI_DPT_I2O=m
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+CONFIG_SCSI_MPT2SAS=m
+CONFIG_SCSI_MPT2SAS_MAX_SGE=128
+# CONFIG_SCSI_MPT2SAS_LOGGING is not set
# CONFIG_SCSI_HPTIOP is not set
+CONFIG_LIBFC=m
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
+CONFIG_SCSI_PMCRAID=m
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
+CONFIG_SCSI_BFA_FC=m
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=y
-CONFIG_MD_RAID5_RESHAPE=y
+# CONFIG_MULTICORE_RAID456 is not set
+CONFIG_MD_RAID6_PQ=y
+# CONFIG_ASYNC_RAID6_TEST is not set
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
+CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+# CONFIG_FUSION is not set
#
-# Fusion MPT device support
+# IEEE 1394 (FireWire) support
#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
-# IEEE 1394 (FireWire) support
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-CONFIG_NETDEVICES_MULTIQUEUE=y
CONFIG_IFB=m
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+CONFIG_VETH=m
# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=m
+CONFIG_PHYLIB=y
#
# MII PHY device drivers
CONFIG_SMSC_PHY=m
# CONFIG_BROADCOM_PHY is not set
CONFIG_ICPLUS_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_NATIONAL_PHY=m
+CONFIG_STE10XP=m
+CONFIG_LSI_ET1011C_PHY=m
# CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=m
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_AX88796=m
+CONFIG_AX88796_93CX6=y
CONFIG_SGI_IOC3_ETH=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+CONFIG_SMC91X=m
# CONFIG_DM9000 is not set
+CONFIG_ETHOC=m
+CONFIG_SMSC911X=m
+CONFIG_DNET=m
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
+CONFIG_B44=m
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI=y
+CONFIG_KS8842=m
+CONFIG_KS8851_MLL=m
+CONFIG_ATL2=m
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+CONFIG_E1000E=m
+CONFIG_IP1000=m
+CONFIG_IGB=m
+CONFIG_IGBVF=m
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SKY2 is not set
CONFIG_VIA_VELOCITY=m
# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
+CONFIG_BNX2=m
+CONFIG_CNIC=m
CONFIG_QLA3XXX=m
# CONFIG_ATL1 is not set
+CONFIG_ATL1E=m
+CONFIG_ATL1C=m
+CONFIG_JME=m
CONFIG_NETDEV_10000=y
+CONFIG_MDIO=m
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
CONFIG_CHELSIO_T3=m
+CONFIG_ENIC=m
+CONFIG_IXGBE=m
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+CONFIG_VXGE=m
+# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
# CONFIG_MYRI10GE is not set
CONFIG_NETXEN_NIC=m
-# CONFIG_MLX4_CORE is not set
+CONFIG_NIU=m
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
+# CONFIG_MLX4_DEBUG is not set
+CONFIG_TEHUTI=m
+CONFIG_BNX2X=m
+CONFIG_QLGE=m
+CONFIG_SFC=m
+CONFIG_BE2NET=m
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
+CONFIG_WLAN=y
+CONFIG_LIBERTAS_THINFIRM=m
+CONFIG_ATMEL=m
+CONFIG_PCI_ATMEL=m
+CONFIG_PRISM54=m
+CONFIG_RTL8180=m
+CONFIG_ADM8211=m
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_MWL8K=m
+CONFIG_ATH_COMMON=m
+# CONFIG_ATH_DEBUG is not set
+CONFIG_ATH5K=m
+# CONFIG_ATH5K_DEBUG is not set
+CONFIG_ATH9K_HW=m
+CONFIG_ATH9K_COMMON=m
+CONFIG_ATH9K=m
+CONFIG_B43=m
+CONFIG_B43_PCI_AUTOSELECT=y
+CONFIG_B43_PCICORE_AUTOSELECT=y
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+CONFIG_B43LEGACY=m
+CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+CONFIG_B43LEGACY_LEDS=y
+CONFIG_B43LEGACY_HWRNG=y
+# CONFIG_B43LEGACY_DEBUG is not set
+CONFIG_B43LEGACY_DMA=y
+CONFIG_B43LEGACY_PIO=y
+CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+# CONFIG_B43LEGACY_DMA_MODE is not set
+# CONFIG_B43LEGACY_PIO_MODE is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOSTAP_PCI=m
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
CONFIG_IPW2100_DEBUG=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
CONFIG_IPW2200_DEBUG=y
+CONFIG_LIBIPW=m
+# CONFIG_LIBIPW_DEBUG is not set
+CONFIG_IWLWIFI=m
+CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT=y
+# CONFIG_IWLWIFI_DEBUG is not set
+CONFIG_IWLAGN=m
+CONFIG_IWL4965=y
+CONFIG_IWL5000=y
+CONFIG_IWL3945=m
+CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
CONFIG_LIBERTAS=m
# CONFIG_LIBERTAS_DEBUG is not set
CONFIG_HERMES=m
+# CONFIG_HERMES_CACHE_FW_ON_INIT is not set
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCI_HERMES=m
-CONFIG_ATMEL=m
-CONFIG_PCI_ATMEL=m
-CONFIG_PRISM54=m
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_HOSTAP_PLX=m
-CONFIG_HOSTAP_PCI=m
-CONFIG_BCM43XX=m
-CONFIG_BCM43XX_DEBUG=y
-CONFIG_BCM43XX_DMA=y
-CONFIG_BCM43XX_PIO=y
-CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
-# CONFIG_BCM43XX_DMA_MODE is not set
-# CONFIG_BCM43XX_PIO_MODE is not set
+CONFIG_P54_COMMON=m
+CONFIG_P54_PCI=m
+CONFIG_P54_LEDS=y
+CONFIG_RT2X00=m
+CONFIG_RT2400PCI=m
+CONFIG_RT2500PCI=m
+CONFIG_RT61PCI=m
+CONFIG_RT2800PCI_PCI=m
+CONFIG_RT2800PCI=m
+CONFIG_RT2800_LIB=m
+CONFIG_RT2X00_LIB_PCI=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_HT=y
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_WL12XX=m
+CONFIG_WL1251=m
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=m
CONFIG_SERIO_RAW=m
+CONFIG_SERIO_ALTERA_PS2=m
# CONFIG_GAMEPORT is not set
#
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+CONFIG_NOZOMI=m
#
# Serial drivers
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
-# CONFIG_RTC is not set
+CONFIG_HW_RANDOM_TIMERIOMEM=m
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+CONFIG_I2C_ALI1535=m
+CONFIG_I2C_ALI1563=m
+CONFIG_I2C_ALI15X3=m
+CONFIG_I2C_AMD756=m
+CONFIG_I2C_AMD8111=m
+CONFIG_I2C_I801=m
+CONFIG_I2C_ISCH=m
+CONFIG_I2C_PIIX4=m
+CONFIG_I2C_NFORCE2=m
+CONFIG_I2C_SIS5595=m
+CONFIG_I2C_SIS630=m
+CONFIG_I2C_SIS96X=m
+CONFIG_I2C_VIA=m
+CONFIG_I2C_VIAPRO=m
#
-# SPI support
+# I2C system bus drivers (mostly embedded / system-on-chip)
#
+CONFIG_I2C_OCORES=m
+CONFIG_I2C_SIMTEC=m
+
+#
+# External I2C/SMBus adapter drivers
+#
+CONFIG_I2C_PARPORT_LIGHT=m
+CONFIG_I2C_TAOS_EVM=m
+
+#
+# Other I2C/SMBus bus drivers
+#
+CONFIG_I2C_PCA_PLATFORM=m
+CONFIG_I2C_STUB=m
+
+#
+# Miscellaneous I2C Chip support
+#
+CONFIG_SENSORS_TSL2550=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+
+#
+# PPS support
+#
+CONFIG_PPS=m
+# CONFIG_PPS_DEBUG is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+CONFIG_THERMAL=m
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+# CONFIG_SSB_DRIVER_MIPS is not set
#
-# Multimedia devices
+# Multifunction device drivers
#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+CONFIG_MFD_WM8350=m
+CONFIG_MFD_WM8350_I2C=m
+CONFIG_MFD_PCF50633=m
+CONFIG_PCF50633_ADC=m
+CONFIG_PCF50633_GPIO=m
+CONFIG_AB3100_CORE=m
+CONFIG_AB3100_OTP=m
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGA_ARB is not set
+# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Sound
+# Display device support
#
+# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
#
#
-# USB Gadget Support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_RTC_CLASS is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+CONFIG_LEDS_LP3944=m
+CONFIG_LEDS_PCA955X=m
+CONFIG_LEDS_WM8350=m
+CONFIG_LEDS_BD2802=m
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
-# DMA Engine support
+# iptables trigger is under Netfilter config (LED target)
#
-# CONFIG_DMA_ENGINE is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
-# DMA Clients
+# RTC interfaces
#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# DMA Devices
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_M48T35=y
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+# CONFIG_RTC_DRV_WM8350 is not set
+# CONFIG_RTC_DRV_PCF50633 is not set
+CONFIG_RTC_DRV_AB3100=m
#
-# Userspace I/O
+# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
# CONFIG_UIO_CIF is not set
+# CONFIG_UIO_PDRV is not set
+# CONFIG_UIO_PDRV_GENIRQ is not set
+CONFIG_UIO_SMX=m
+CONFIG_UIO_AEC=m
+CONFIG_UIO_SERCOS3=m
+CONFIG_UIO_PCI_GENERIC=m
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
#
# File systems
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=y
-CONFIG_JBD_DEBUG=y
+CONFIG_JBD2=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
-CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
+CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
CONFIG_GENERIC_ACL=y
+#
+# Caches
+#
+CONFIG_FSCACHE=m
+CONFIG_FSCACHE_STATS=y
+# CONFIG_FSCACHE_HISTOGRAM is not set
+# CONFIG_FSCACHE_DEBUG is not set
+# CONFIG_FSCACHE_OBJECT_LIST is not set
+CONFIG_CACHEFILES=m
+# CONFIG_CACHEFILES_DEBUG is not set
+# CONFIG_CACHEFILES_HISTOGRAM is not set
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_OMFS_FS=m
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_EXOFS_FS=m
+# CONFIG_EXOFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
# CONFIG_ROOT_NFS is not set
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_EARLY_PRINTK=y
# CONFIG_CMDLINE_BOOL is not set
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
-CONFIG_XOR_BLOCKS=m
-CONFIG_ASYNC_CORE=m
-CONFIG_ASYNC_MEMCPY=m
-CONFIG_ASYNC_XOR=m
+CONFIG_SECURITYFS=y
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=y
+CONFIG_ASYNC_CORE=y
+CONFIG_ASYNC_MEMCPY=y
+CONFIG_ASYNC_XOR=y
+CONFIG_ASYNC_PQ=y
+CONFIG_ASYNC_RAID6_RECOV=y
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ABLKCIPHER=m
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_VMAC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_HIFN_795X=m
+# CONFIG_CRYPTO_DEV_HIFN_795X_RNG is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
+CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
# ifndef cpu_has_64bit_addresses
# define cpu_has_64bit_addresses 0
# endif
+# ifndef cpu_vmbits
+# define cpu_vmbits 31
+# endif
#endif
#ifdef CONFIG_64BIT
# ifndef cpu_has_64bit_addresses
# define cpu_has_64bit_addresses 1
# endif
+# ifndef cpu_vmbits
+# define cpu_vmbits cpu_data[0].vmbits
+# define __NEED_VMBITS_PROBE
+# endif
#endif
#if defined(CONFIG_CPU_MIPSR2_IRQ_VI) && !defined(cpu_has_vint)
struct cache_desc tcache; /* Tertiary/split secondary cache */
int srsets; /* Shadow register sets */
int core; /* physical core number */
+#ifdef CONFIG_64BIT
+ int vmbits; /* Virtual memory size in bits */
+#endif
#if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC)
/*
* In the MIPS MT "SMTC" model, each TC is considered
dbdev_tab_t *chan_dest;
au1x_dma_chan_t *chan_ptr;
au1x_ddma_desc_t *chan_desc_base;
+ u32 cdb_membase; /* kmalloc base of above */
au1x_ddma_desc_t *get_ptr, *put_ptr, *cur_ptr;
void *chan_callparam;
void (*chan_callback)(int, void *);
#define VMALLOC_START MAP_BASE
#define VMALLOC_END \
(VMALLOC_START + \
- PTRS_PER_PGD * PTRS_PER_PMD * PTRS_PER_PTE * PAGE_SIZE - (1UL << 32))
+ min(PTRS_PER_PGD * PTRS_PER_PMD * PTRS_PER_PTE * PAGE_SIZE, \
+ (1UL << cpu_vmbits)) - (1UL << 32))
+
#if defined(CONFIG_MODULES) && defined(KBUILD_64BIT_SYM32) && \
VMALLOC_START != CKSSEG
/* Load modules into 32bit-compatible segment. */
return ((cpu_get_fpu_id() & 0xff00) != FPIR_IMP_NONE);
}
+static inline void cpu_probe_vmbits(struct cpuinfo_mips *c)
+{
+#ifdef __NEED_VMBITS_PROBE
+ write_c0_entryhi(0x3fffffffffffe000ULL);
+ back_to_back_c0_hazard();
+ c->vmbits = fls64(read_c0_entryhi() & 0x3fffffffffffe000ULL);
+#endif
+}
+
#define R4K_OPTS (MIPS_CPU_TLB | MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE \
| MIPS_CPU_COUNTER)
c->srsets = ((read_c0_srsctl() >> 26) & 0x0f) + 1;
else
c->srsets = 1;
+
+ cpu_probe_vmbits(c);
}
__cpuinit void cpu_report(void)
cp0_perfcount_irq = -1;
} else {
cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ;
+ cp0_compare_irq_shift = cp0_compare_irq;
cp0_perfcount_irq = -1;
}
* Probe Octeon's caches
*
*/
-static void __devinit probe_octeon(void)
+static void __cpuinit probe_octeon(void)
{
unsigned long icache_size;
unsigned long dcache_size;
* Setup the Octeon cache flush routines
*
*/
-void __devinit octeon_cache_init(void)
+void __cpuinit octeon_cache_init(void)
{
extern unsigned long ebase;
extern char except_vec2_octeon;
protection_map[15] = PAGE_SHARED;
}
-void __devinit cpu_cache_init(void)
+void __cpuinit cpu_cache_init(void)
{
if (cpu_has_3k_cache) {
extern void __weak r3k_cache_init(void);
#include <linux/module.h>
#include <linux/highmem.h>
+#include <linux/sched.h>
#include <linux/smp.h>
#include <asm/fixmap.h>
#include <asm/tlbflush.h>
if (!rm200_pic_master)
return;
rm200_pic_slave = ioremap_nocache(0x160000a0, 4);
- if (!rm200_pic_master) {
+ if (!rm200_pic_slave) {
iounmap(rm200_pic_master);
return;
}
select BUG
select HAVE_PERF_EVENTS
select GENERIC_ATOMIC64 if !64BIT
- select HAVE_ARCH_TRACEHOOK
help
The PA-RISC microprocessor is designed by Hewlett-Packard and used
in many of their workstations & servers (HP9000 700 and 800 series,
#include <asm/io.h>
#include <asm/system.h>
-#include <asm/cache.h> /* for L1_CACHE_BYTES */
#include <asm/superio.h>
#define DEBUG_RESOURCES 0
} else {
printk(KERN_WARNING "pci_bios != NULL but init() is!\n");
}
+
+ /* Set the CLS for PCI as early as possible. */
+ pci_cache_line_size = pci_dfl_cache_line_size;
+
return 0;
}
** upper byte is PCI_LATENCY_TIMER.
*/
pci_write_config_word(dev, PCI_CACHE_LINE_SIZE,
- (0x80 << 8) | (L1_CACHE_BYTES / sizeof(u32)));
+ (0x80 << 8) | pci_cache_line_size);
}
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
- tracehook_signal_handler(sig, info, ka, regs, 0);
+ tracehook_signal_handler(sig, info, ka, regs,
+ test_thread_flag(TIF_SINGLESTEP) ||
+ test_thread_flag(TIF_BLOCKSTEP));
return 1;
}
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:17:46 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan 4 15:33:07 2010
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
CONFIG_40x=y
# CONFIG_E200 is not set
CONFIG_4xx=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
CONFIG_ACADIA=y
# CONFIG_EP405 is not set
# CONFIG_HCU4 is not set
+# CONFIG_HOTFOOT is not set
# CONFIG_KILAUEA is not set
# CONFIG_MAKALU is not set
# CONFIG_WALNUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_IBM_NEW_EMAC=y
CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR=y
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:17:48 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan 4 15:37:34 2010
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
CONFIG_40x=y
# CONFIG_E200 is not set
CONFIG_4xx=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
# CONFIG_ACADIA is not set
CONFIG_EP405=y
# CONFIG_HCU4 is not set
+# CONFIG_HOTFOOT is not set
# CONFIG_KILAUEA is not set
# CONFIG_MAKALU is not set
# CONFIG_WALNUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_IBM_NEW_EMAC=y
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_LIBUSUAL is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:17:50 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan 4 15:45:11 2010
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
CONFIG_40x=y
# CONFIG_E200 is not set
CONFIG_4xx=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
# CONFIG_ACADIA is not set
# CONFIG_EP405 is not set
CONFIG_HCU4=y
+# CONFIG_HOTFOOT is not set
# CONFIG_KILAUEA is not set
# CONFIG_MAKALU is not set
# CONFIG_WALNUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_IBM_NEW_EMAC=y
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 13:28:37 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan 4 15:51:23 2010
#
# CONFIG_PPC64 is not set
# CONFIG_E200 is not set
CONFIG_4xx=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
CONFIG_PPC4xx_PCI_EXPRESS=y
# CONFIG_ACADIA is not set
# CONFIG_EP405 is not set
# CONFIG_HCU4 is not set
+# CONFIG_HOTFOOT is not set
CONFIG_KILAUEA=y
# CONFIG_MAKALU is not set
# CONFIG_WALNUT is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SWIOTLB is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc7
-# Wed Jun 3 09:11:02 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan 4 15:55:12 2010
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
CONFIG_40x=y
# CONFIG_E200 is not set
CONFIG_4xx=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
CONFIG_PPC4xx_PCI_EXPRESS=y
# CONFIG_ACADIA is not set
# CONFIG_EP405 is not set
# CONFIG_HCU4 is not set
+# CONFIG_HOTFOOT is not set
# CONFIG_KILAUEA is not set
CONFIG_MAKALU=y
# CONFIG_WALNUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:17:57 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan 4 15:56:30 2010
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
CONFIG_40x=y
# CONFIG_E200 is not set
CONFIG_4xx=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
# CONFIG_ACADIA is not set
# CONFIG_EP405 is not set
# CONFIG_HCU4 is not set
+# CONFIG_HOTFOOT is not set
# CONFIG_KILAUEA is not set
# CONFIG_MAKALU is not set
CONFIG_WALNUT=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_IBM_NEW_EMAC=y
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc5
-# Thu Aug 13 14:14:07 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan 4 14:02:35 2010
#
# CONFIG_PPC64 is not set
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
CONFIG_PPC4xx_PCI_EXPRESS=y
# CONFIG_CANYONLANDS is not set
# CONFIG_GLACIER is not set
# CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
# CONFIG_YOSEMITE is not set
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
CONFIG_PPC44x_SIMPLE=y
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SWIOTLB is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_STDBINUTILS=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
CONFIG_SENSORS_AD7414=y
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:22:33 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan 4 14:09:03 2010
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
# CONFIG_ARCHES is not set
# CONFIG_CANYONLANDS is not set
# CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
# CONFIG_YOSEMITE is not set
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
CONFIG_PPC44x_SIMPLE=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_IBM_NEW_EMAC=y
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 17:27:20 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan 4 14:12:20 2010
#
# CONFIG_PPC64 is not set
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
CONFIG_PPC4xx_PCI_EXPRESS=y
CONFIG_CANYONLANDS=y
# CONFIG_GLACIER is not set
# CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
# CONFIG_YOSEMITE is not set
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
CONFIG_PPC44x_SIMPLE=y
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SWIOTLB is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_STDBINUTILS=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
CONFIG_SENSORS_AD7414=y
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
# CONFIG_RTC_DRV_PCF8583 is not set
CONFIG_RTC_DRV_M41T80=y
# CONFIG_RTC_DRV_M41T80_WDT is not set
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:22:36 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan 4 14:20:46 2010
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
# CONFIG_ARCHES is not set
# CONFIG_CANYONLANDS is not set
# CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
# CONFIG_YOSEMITE is not set
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
# CONFIG_PPC44x_SIMPLE is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_OF_PARTS=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_IBM_NEW_EMAC=y
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Wed Aug 19 13:06:50 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan 4 14:33:04 2010
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
CONFIG_PPC4xx_PCI_EXPRESS=y
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SWIOTLB is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_STDBINUTILS=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:22:38 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan 4 14:55:34 2010
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
CONFIG_PPC4xx_PCI_EXPRESS=y
# CONFIG_ARCHES is not set
# CONFIG_CANYONLANDS is not set
# CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
# CONFIG_YOSEMITE is not set
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
CONFIG_PPC44x_SIMPLE=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_IBM_NEW_EMAC=y
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:22:41 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan 4 14:59:12 2010
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
# CONFIG_ARCHES is not set
# CONFIG_CANYONLANDS is not set
# CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
# CONFIG_YOSEMITE is not set
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
CONFIG_PPC44x_SIMPLE=y
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_PPC_EARLY_DEBUG_44x=y
# CONFIG_PPC_EARLY_DEBUG_40x is not set
# CONFIG_PPC_EARLY_DEBUG_CPM is not set
+# CONFIG_PPC_EARLY_DEBUG_USBGECKO is not set
CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0xef600300
CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc3
-# Wed Feb 4 14:31:09 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan 4 15:05:05 2010
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
CONFIG_PPC4xx_PCI_EXPRESS=y
# CONFIG_CANYONLANDS is not set
# CONFIG_GLACIER is not set
CONFIG_REDWOOD=y
+# CONFIG_EIGER is not set
# CONFIG_YOSEMITE is not set
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
CONFIG_PPC44x_SIMPLE=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_FUSION=y
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_IBM_NEW_EMAC=y
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000E=y
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
CONFIG_I2C_DEBUG_CHIP=y
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
#
# DMA Devices
#
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=y
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:22:42 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan 4 15:11:24 2010
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
# CONFIG_ARCHES is not set
# CONFIG_CANYONLANDS is not set
# CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
# CONFIG_YOSEMITE is not set
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
# CONFIG_PPC44x_SIMPLE is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
# CONFIG_SATA_PMP is not set
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_IBM_NEW_EMAC=y
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_ILI9320 is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_RTC_DRV_PCF8583 is not set
CONFIG_RTC_DRV_M41T80=y
CONFIG_RTC_DRV_M41T80_WDT=y
+# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Tue Apr 7 17:04:52 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan 4 15:15:51 2010
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
# CONFIG_CANYONLANDS is not set
# CONFIG_GLACIER is not set
# CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
# CONFIG_YOSEMITE is not set
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
CONFIG_PPC44x_SIMPLE=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_STDBINUTILS=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:22:47 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan 4 15:21:04 2010
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
# CONFIG_ARCHES is not set
# CONFIG_CANYONLANDS is not set
# CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
# CONFIG_YOSEMITE is not set
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
CONFIG_PPC44x_SIMPLE=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_OF_PARTS is not set
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_IBM_NEW_EMAC=y
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Tue Jun 9 23:35:36 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan 4 15:27:46 2010
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_CANYONLANDS is not set
# CONFIG_GLACIER is not set
# CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
# CONFIG_YOSEMITE is not set
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
# CONFIG_PPC44x_SIMPLE is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_STDBINUTILS=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_XILINX_SYSACE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
#
CONFIG_EEPROM_AT24=y
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IWMC3200TOP is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
-# CONFIG_SCSI_WAIT_SCAN is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_XILINX_EMACLITE is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN=y
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
CONFIG_SENSORS_AD7414=y
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_WBSD is not set
-CONFIG_MMC_PIKASD=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
# CONFIG_LEDS_GPIO_PLATFORM is not set
CONFIG_LEDS_GPIO_OF=y
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
#
# LED Triggers
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
# CONFIG_CRYPTO_MANAGER is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Fri Jan 23 08:44:03 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan 4 13:54:06 2010
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
CONFIG_40x=y
# CONFIG_E200 is not set
CONFIG_4xx=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
-# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_DTC=y
+CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
CONFIG_PPC4xx_PCI_EXPRESS=y
CONFIG_ACADIA=y
CONFIG_EP405=y
CONFIG_HCU4=y
+CONFIG_HOTFOOT=y
CONFIG_KILAUEA=y
CONFIG_MAKALU=y
CONFIG_WALNUT=y
CONFIG_XILINX_VIRTEX_GENERIC_BOARD=y
CONFIG_PPC40x_SIMPLE=y
CONFIG_405GP=y
+CONFIG_405EP=y
CONFIG_405EX=y
CONFIG_405EZ=y
CONFIG_405GPR=y
# CONFIG_FSL_ULI1575 is not set
CONFIG_OF_RTC=y
# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_XILINX_PCI is not set
#
# Kernel options
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
-CONFIG_MTD_UBI_GLUEBI=y
+CONFIG_MTD_UBI_GLUEBI=m
#
# UBI debugging options
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_XILINX_SYSACE=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_IBM_NEW_EMAC=y
CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR=y
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_RAW is not set
CONFIG_SERIO_XILINX_XPS_PS2=m
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=m
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Fri Jan 23 08:43:46 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan 4 13:42:17 2010
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
-# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_DTC=y
+CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
CONFIG_PPC4xx_PCI_EXPRESS=y
CONFIG_ARCHES=y
CONFIG_CANYONLANDS=y
CONFIG_GLACIER=y
+CONFIG_REDWOOD=y
+CONFIG_EIGER=y
CONFIG_YOSEMITE=y
CONFIG_XILINX_VIRTEX440_GENERIC_BOARD=y
+# CONFIG_XILINX_ML510 is not set
CONFIG_PPC44x_SIMPLE=y
CONFIG_PPC4xx_GPIO=y
CONFIG_440EP=y
CONFIG_440GX=y
CONFIG_440SPe=y
CONFIG_460EX=y
+CONFIG_460SX=y
CONFIG_IBM440EP_ERR42=y
CONFIG_XILINX_VIRTEX=y
CONFIG_XILINX_VIRTEX_5_FXT=y
# CONFIG_FSL_ULI1575 is not set
CONFIG_OF_RTC=y
# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_XILINX_PCI is not set
#
# Kernel options
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_STP=m
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_OF_PARTS=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
-CONFIG_MTD_UBI_GLUEBI=y
+CONFIG_MTD_UBI_GLUEBI=m
#
# UBI debugging options
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_XILINX_SYSACE=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_IBM_NEW_EMAC=y
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_RAW is not set
CONFIG_SERIO_XILINX_XPS_PS2=m
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
#
# Other I2C/SMBus bus drivers
#
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y
+# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
# CONFIG_USB_OHCI_HCD_PCI is not set
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=m
#
#ifdef __powerpc64__
# define SET_PERSONALITY(ex) \
do { \
- unsigned long new_flags = 0; \
if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \
- new_flags = _TIF_32BIT; \
- if ((current_thread_info()->flags & _TIF_32BIT) \
- != new_flags) \
- set_thread_flag(TIF_ABI_PENDING); \
+ set_thread_flag(TIF_32BIT); \
else \
- clear_thread_flag(TIF_ABI_PENDING); \
+ clear_thread_flag(TIF_32BIT); \
if (personality(current->personality) != PER_LINUX32) \
set_personality(PER_LINUX | \
(current->personality & (~PER_MASK))); \
#define TIF_NOTIFY_RESUME 13 /* callback before returning to user */
#define TIF_FREEZE 14 /* Freezing for suspend */
#define TIF_RUNLATCH 15 /* Is the runlatch enabled? */
-#define TIF_ABI_PENDING 16 /* 32/64 bit switch needed */
/* as above, but as bit values */
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME)
#define _TIF_FREEZE (1<<TIF_FREEZE)
#define _TIF_RUNLATCH (1<<TIF_RUNLATCH)
-#define _TIF_ABI_PENDING (1<<TIF_ABI_PENDING)
#define _TIF_SYSCALL_T_OR_A (_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP)
#define _TIF_USER_WORK_MASK (_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
{
struct pci_dev *dev;
const char *type;
+ struct pci_slot *slot;
dev = alloc_pci_dev();
if (!dev)
dev->devfn = devfn;
dev->multifunction = 0; /* maybe a lie? */
dev->needs_freset = 0; /* pcie fundamental reset required */
+ set_pcie_port_type(dev);
+
+ list_for_each_entry(slot, &dev->bus->slots, list)
+ if (PCI_SLOT(dev->devfn) == slot->number)
+ dev->slot = slot;
dev->vendor = get_int_prop(node, "vendor-id", 0xffff);
dev->device = get_int_prop(node, "device-id", 0xffff);
dev->error_state = pci_channel_io_normal;
dev->dma_mask = 0xffffffff;
+ /* Early fixups, before probing the BARs */
+ pci_fixup_device(pci_fixup_early, dev);
+
if (!strcmp(type, "pci") || !strcmp(type, "pciex")) {
/* a PCI-PCI bridge */
dev->hdr_type = PCI_HEADER_TYPE_BRIDGE;
dev->rom_base_reg = PCI_ROM_ADDRESS1;
+ set_pcie_hotplug_bridge(dev);
} else if (!strcmp(type, "cardbus")) {
dev->hdr_type = PCI_HEADER_TYPE_CARDBUS;
} else {
void flush_thread(void)
{
-#ifdef CONFIG_PPC64
- struct thread_info *t = current_thread_info();
-
- if (test_ti_thread_flag(t, TIF_ABI_PENDING)) {
- clear_ti_thread_flag(t, TIF_ABI_PENDING);
- if (test_ti_thread_flag(t, TIF_32BIT))
- clear_ti_thread_flag(t, TIF_32BIT);
- else
- set_ti_thread_flag(t, TIF_32BIT);
- }
-#endif
-
discard_lazy_cpu_state();
if (current->thread.dabr) {
if (huge) {
#ifdef CONFIG_HUGETLB_PAGE
psize = get_slice_psize(mm, addr);
+ /* Mask the address for the correct page size */
+ addr &= ~((1UL << mmu_psize_defs[psize].shift) - 1);
#else
BUG();
psize = pte_pagesize_index(mm, addr, pte); /* shutup gcc */
#endif
- } else
+ } else {
psize = pte_pagesize_index(mm, addr, pte);
+ /* Mask the address for the standard page size. If we
+ * have a 64k page kernel, but the hardware does not
+ * support 64k pages, this might be different from the
+ * hardware page size encoded in the slice table. */
+ addr &= PAGE_MASK;
+ }
- /* Mask the address for the correct page size */
- addr &= ~((1UL << mmu_psize_defs[psize].shift) - 1);
/* Build full vaddr */
if (!is_kernel_addr(addr)) {
}
mpic = mpic_alloc(np, r.start,
- MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+ MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN |
+ MPIC_BROKEN_FRR_NIRQS,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
of_node_put(np);
__iomem u32 *bptr_vaddr;
struct device_node *np;
int n = 0;
+ int ioremappable;
WARN_ON (nr < 0 || nr >= NR_CPUS);
return;
}
+ /*
+ * A secondary core could be in a spinloop in the bootpage
+ * (0xfffff000), somewhere in highmem, or somewhere in lowmem.
+ * The bootpage and highmem can be accessed via ioremap(), but
+ * we need to directly access the spinloop if its in lowmem.
+ */
+ ioremappable = *cpu_rel_addr > virt_to_phys(high_memory);
+
/* Map the spin table */
- bptr_vaddr = ioremap(*cpu_rel_addr, SIZE_BOOT_ENTRY);
+ if (ioremappable)
+ bptr_vaddr = ioremap(*cpu_rel_addr, SIZE_BOOT_ENTRY);
+ else
+ bptr_vaddr = phys_to_virt(*cpu_rel_addr);
local_irq_save(flags);
out_be32(bptr_vaddr + BOOT_ENTRY_PIR, nr);
out_be32(bptr_vaddr + BOOT_ENTRY_ADDR_LOWER, __pa(__early_start));
+ if (!ioremappable)
+ flush_dcache_range((ulong)bptr_vaddr,
+ (ulong)(bptr_vaddr + SIZE_BOOT_ENTRY));
+
/* Wait a bit for the CPU to ack. */
while ((__secondary_hold_acknowledge != nr) && (++n < 1000))
mdelay(1);
local_irq_restore(flags);
- iounmap(bptr_vaddr);
+ if (ioremappable)
+ iounmap(bptr_vaddr);
pr_debug("waited %d msecs for CPU #%d.\n", n, nr);
}
return default_server;
}
#else
-static int get_irq_server(unsigned int virq, cpumask_t cpumask,
- unsigned int strict_check)
-{
- return default_server;
-}
+#define get_irq_server(virq, cpumask, strict_check) (default_server)
#endif
static void xics_unmask_irq(unsigned int virq)
{
struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr);
- BUG_ON(os_cppr->index != 0);
+ /*
+ * we only really want to set the priority when there's
+ * just one cppr value on the stack
+ */
+ WARN_ON(os_cppr->index != 0);
- os_cppr->stack[os_cppr->index] = cppr;
+ os_cppr->stack[0] = cppr;
if (firmware_has_feature(FW_FEATURE_LPAR))
lpar_cppr_info(cppr);
void xics_teardown_cpu(void)
{
+ struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr);
int cpu = smp_processor_id();
+ /*
+ * we have to reset the cppr index to 0 because we're
+ * not going to return from the IPI
+ */
+ os_cppr->index = 0;
xics_set_cpu_priority(0);
/* Clear any pending IPI request */
hose->last_busno = bus_range ? bus_range[1] : 0xff;
/* Setup config space */
- setup_indirect_pci(hose, rsrc_cfg.start, rsrc_cfg.start + 0x4, 0);
+ setup_indirect_pci(hose, rsrc_cfg.start, rsrc_cfg.start + 0x4,
+ PPC_INDIRECT_TYPE_SET_CFG_TYPE);
/* Disable all windows */
writel(0, reg + PCIX0_POM0SA);
__u64 clock_comparator; /* 0x02d0 */
__u32 machine_flags; /* 0x02d8 */
__u32 ftrace_func; /* 0x02dc */
- __u8 pad_0x02f0[0x0300-0x02f0]; /* 0x02f0 */
+ __u8 pad_0x02e0[0x0300-0x02e0]; /* 0x02e0 */
/* Interrupt response block */
__u8 irb[64]; /* 0x0300 */
- __u8 pad_0x0400[0x0e00-0x0400]; /* 0x0400 */
+ __u8 pad_0x0340[0x0e00-0x0340]; /* 0x0340 */
/*
* 0xe00 contains the address of the IPL Parameter Information
static int clk_debugfs_register_one(struct clk *c)
{
int err;
- struct dentry *d, *child;
+ struct dentry *d, *child, *child_tmp;
struct clk *pa = c->parent;
char s[255];
char *p = s;
err_out:
d = c->dentry;
- list_for_each_entry(child, &d->d_subdirs, d_u.d_child)
+ list_for_each_entry_safe(child, child_tmp, &d->d_subdirs, d_u.d_child)
debugfs_remove(child);
debugfs_remove(c->dentry);
return err;
mov #1, r5
call_handle_tlbmiss:
- setup_frame_reg
mov.l 1f, r0
mov r5, r8
mov.l @r0, r6
mov.l @k2, k2 ! read out vector and keep in k2
handle_exception_special:
+ setup_frame_reg
+
! Setup return address and jump to exception handler
mov.l 7f, r9 ! fetch return address
stc r2_bank, r0 ! k2 (vector)
mempool_free(frame, dwarf_frame_pool);
}
+extern void ret_from_irq(void);
+
/**
* dwarf_unwind_stack - unwind the stack
*
addr = frame->cfa + reg->addr;
frame->return_addr = __raw_readl(addr);
+ /*
+ * Ah, the joys of unwinding through interrupts.
+ *
+ * Interrupts are tricky - the DWARF info needs to be _really_
+ * accurate and unfortunately I'm seeing a lot of bogus DWARF
+ * info. For example, I've seen interrupts occur in epilogues
+ * just after the frame pointer (r14) had been restored. The
+ * problem was that the DWARF info claimed that the CFA could be
+ * reached by using the value of the frame pointer before it was
+ * restored.
+ *
+ * So until the compiler can be trusted to produce reliable
+ * DWARF info when it really matters, let's stop unwinding once
+ * we've calculated the function that was interrupted.
+ */
+ if (prev && prev->pc == (unsigned long)ret_from_irq)
+ frame->return_addr = 0;
+
return frame;
bail:
static void dwarf_unwinder_cleanup(void)
{
- struct dwarf_cie *cie;
- struct dwarf_fde *fde;
+ struct dwarf_cie *cie, *cie_tmp;
+ struct dwarf_fde *fde, *fde_tmp;
/*
* Deallocate all the memory allocated for the DWARF unwinder.
* Traverse all the FDE/CIE lists and remove and free all the
* memory associated with those data structures.
*/
- list_for_each_entry(cie, &dwarf_cie_list, link)
+ list_for_each_entry_safe(cie, cie_tmp, &dwarf_cie_list, link)
kfree(cie);
- list_for_each_entry(fde, &dwarf_fde_list, link)
+ list_for_each_entry_safe(fde, fde_tmp, &dwarf_fde_list, link)
kfree(fde);
kmem_cache_destroy(dwarf_reg_cachep);
CFI_STARTPROC simple
CFI_DEF_CFA r14, 0
CFI_REL_OFFSET 17, 64
- CFI_REL_OFFSET 15, 0
+ CFI_REL_OFFSET 15, 60
CFI_REL_OFFSET 14, 56
+ CFI_REL_OFFSET 13, 52
+ CFI_REL_OFFSET 12, 48
+ CFI_REL_OFFSET 11, 44
+ CFI_REL_OFFSET 10, 40
+ CFI_REL_OFFSET 9, 36
+ CFI_REL_OFFSET 8, 32
preempt_stop()
ENTRY(ret_from_irq)
!
struct pt_regs *regs = child->thread.uregs;
regs->sr |= SR_SSTEP; /* auto-resetting upon exception */
+
+ set_tsk_thread_flag(child, TIF_SINGLESTEP);
}
void user_disable_single_step(struct task_struct *child)
struct pt_regs *regs = child->thread.uregs;
regs->sr &= ~SR_SSTEP;
+
+ clear_tsk_thread_flag(child, TIF_SINGLESTEP);
}
static int genregs_get(struct task_struct *target,
asmlinkage void do_syscall_trace_leave(struct pt_regs *regs)
{
+ int step;
+
if (unlikely(current->audit_context))
audit_syscall_exit(AUDITSC_RESULT(regs->regs[9]),
regs->regs[9]);
if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
trace_sys_exit(regs, regs->regs[9]);
- if (test_thread_flag(TIF_SYSCALL_TRACE))
- tracehook_report_syscall_exit(regs, 0);
+ step = test_thread_flag(TIF_SINGLESTEP);
+ if (step || test_thread_flag(TIF_SYSCALL_TRACE))
+ tracehook_report_syscall_exit(regs, step);
}
/* Called with interrupts disabled */
* clear the TS_RESTORE_SIGMASK flag.
*/
current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
- tracehook_signal_handler(signr, &info, &ka, regs, 0);
+
+ tracehook_signal_handler(signr, &info, &ka, regs,
+ test_thread_flag(TIF_SINGLESTEP));
return 1;
}
}
ino_t st_ino;
mode_t st_mode;
short st_nlink;
- uid_t st_uid;
- gid_t st_gid;
+ uid16_t st_uid;
+ gid16_t st_gid;
unsigned short st_rdev;
off_t st_size;
time_t st_atime;
{
unsigned long base = (unsigned long) tp;
+ /* Stack pointer must be 16-byte aligned. */
+ if (sp & (16UL - 1))
+ return false;
+
if (sp >= (base + sizeof(struct thread_info)) &&
sp <= (base + THREAD_SIZE - sizeof(struct sparc_stackf)))
return true;
static int of_bus_ambapp_match(struct device_node *np)
{
- return !strcmp(np->name, "ambapp");
+ return !strcmp(np->type, "ambapp");
}
static void of_bus_ambapp_count_cells(struct device_node *child,
struct pci_bus *bus, int devfn)
{
struct dev_archdata *sd;
+ struct pci_slot *slot;
struct of_device *op;
struct pci_dev *dev;
const char *type;
dev->dev.bus = &pci_bus_type;
dev->devfn = devfn;
dev->multifunction = 0; /* maybe a lie? */
+ set_pcie_port_type(dev);
+
+ list_for_each_entry(slot, &dev->bus->slots, list)
+ if (PCI_SLOT(dev->devfn) == slot->number)
+ dev->slot = slot;
dev->vendor = of_getintprop_default(node, "vendor-id", 0xffff);
dev->device = of_getintprop_default(node, "device-id", 0xffff);
dev->current_state = 4; /* unknown power state */
dev->error_state = pci_channel_io_normal;
+ dev->dma_mask = 0xffffffff;
if (!strcmp(node->name, "pci")) {
/* a PCI-PCI bridge */
* Set some valid stack frames to give to the child.
*/
childstack = (struct sparc_stackf __user *)
- (sp & ~0x7UL);
+ (sp & ~0xfUL);
parentstack = (struct sparc_stackf __user *)
regs->u_regs[UREG_FP];
} else
__get_user(fp, &(((struct reg_window32 __user *)psp)->ins[6]));
- /* Now 8-byte align the stack as this is mandatory in the
- * Sparc ABI due to how register windows work. This hides
- * the restriction from thread libraries etc. -DaveM
+ /* Now align the stack as this is mandatory in the Sparc ABI
+ * due to how register windows work. This hides the
+ * restriction from thread libraries etc.
*/
- csp &= ~7UL;
+ csp &= ~15UL;
distance = fp - psp;
rval = (csp - distance);
};
/* Align macros */
-#define SF_ALIGNEDSZ (((sizeof(struct signal_frame32) + 7) & (~7)))
-#define RT_ALIGNEDSZ (((sizeof(struct rt_signal_frame32) + 7) & (~7)))
+#define SF_ALIGNEDSZ (((sizeof(struct signal_frame32) + 15) & (~15)))
+#define RT_ALIGNEDSZ (((sizeof(struct rt_signal_frame32) + 15) & (~15)))
int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from)
{
sp = current->sas_ss_sp + current->sas_ss_size;
}
+ sp -= framesize;
+
/* Always align the stack frame. This handles two cases. First,
* sigaltstack need not be mindful of platform specific stack
* alignment. Second, if we took this signal because the stack
* is not aligned properly, we'd like to take the signal cleanly
* and report that.
*/
- sp &= ~7UL;
+ sp &= ~15UL;
- return (void __user *)(sp - framesize);
+ return (void __user *) sp;
}
static int save_fpu_state32(struct pt_regs *regs, __siginfo_fpu_t __user *fpu)
sp = current->sas_ss_sp + current->sas_ss_size;
}
+ sp -= framesize;
+
/* Always align the stack frame. This handles two cases. First,
* sigaltstack need not be mindful of platform specific stack
* alignment. Second, if we took this signal because the stack
* is not aligned properly, we'd like to take the signal cleanly
* and report that.
*/
- sp &= ~7UL;
+ sp &= ~15UL;
- return (void __user *)(sp - framesize);
+ return (void __user *) sp;
}
static inline int
/* Checks if the fp is valid */
static int invalid_frame_pointer(void __user *fp, int fplen)
{
- if (((unsigned long) fp) & 7)
+ if (((unsigned long) fp) & 15)
return 1;
return 0;
}
sp = current->sas_ss_sp + current->sas_ss_size;
}
+ sp -= framesize;
+
/* Always align the stack frame. This handles two cases. First,
* sigaltstack need not be mindful of platform specific stack
* alignment. Second, if we took this signal because the stack
* is not aligned properly, we'd like to take the signal cleanly
* and report that.
*/
- sp &= ~7UL;
+ sp &= ~15UL;
- return (void __user *)(sp - framesize);
+ return (void __user *) sp;
}
static inline void
tsb_itlb_load:
/* Executable bit must be set. */
-661: andcc %g5, _PAGE_EXEC_4U, %g0
- .section .sun4v_1insn_patch, "ax"
+661: sethi %hi(_PAGE_EXEC_4U), %g4
+ andcc %g5, %g4, %g0
+ .section .sun4v_2insn_patch, "ax"
.word 661b
andcc %g5, _PAGE_EXEC_4V, %g0
+ nop
.previous
be,pn %xcc, tsb_do_fault
extern int amd_iommu_init_devices(void);
extern void amd_iommu_uninit_devices(void);
extern void amd_iommu_init_notifier(void);
+extern void amd_iommu_init_api(void);
#ifndef CONFIG_AMD_IOMMU_STATS
static inline void amd_iommu_stats_init(void) { }
}
#define ELF_PLAT_INIT(_r, load_addr) \
-do { \
- elf_common_init(¤t->thread, _r, 0); \
- clear_thread_flag(TIF_IA32); \
-} while (0)
+ elf_common_init(¤t->thread, _r, 0)
#define COMPAT_ELF_PLAT_INIT(regs, load_addr) \
elf_common_init(¤t->thread, regs, __USER_DS)
struct perf_event *ptrace_bps[HBP_NUM];
/* Debug status used for traps, single steps, etc... */
unsigned long debugreg6;
+ /* Keep track of the exact dr7 value set by the user */
+ unsigned long ptrace_dr7;
/* Fault info: */
unsigned long cr2;
unsigned long trap_no;
#include <linux/irqflags.h>
/* entries in ARCH_DLINFO: */
-#ifdef CONFIG_IA32_EMULATION
+#if defined(CONFIG_IA32_EMULATION) || !defined(CONFIG_X86_64)
# define AT_VECTOR_SIZE_ARCH 2
-#else
+#else /* else it's non-compat x86-64 */
# define AT_VECTOR_SIZE_ARCH 1
#endif
if (!error) {
acpi_lapic = 1;
-#ifdef CONFIG_X86_BIGSMP
- generic_bigsmp_probe();
-#endif
/*
* Parse MADT IO-APIC entries
*/
acpi_ioapic = 1;
smp_found_config = 1;
- if (apic->setup_apic_routing)
- apic->setup_apic_routing();
}
}
if (error == -EINVAL) {
DMI_MATCH(DMI_PRODUCT_NAME, "Workstation W8000"),
},
},
- {
- .callback = force_acpi_ht,
- .ident = "ASUS P2B-DS",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
- DMI_MATCH(DMI_BOARD_NAME, "P2B-DS"),
- },
- },
{
.callback = force_acpi_ht,
.ident = "ASUS CUR-DLS",
{
int index = dma_dom->aperture_size >> APERTURE_RANGE_SHIFT;
struct amd_iommu *iommu;
- int i;
+ unsigned long i;
#ifdef CONFIG_IOMMU_STRESS
populate = false;
{
struct iommu_dev_data *dev_data = get_dev_data(dev);
struct iommu_dev_data *alias_data;
+ struct protection_domain *domain;
unsigned long flags;
BUG_ON(!dev_data->domain);
- spin_lock_irqsave(&dev_data->domain->lock, flags);
+ domain = dev_data->domain;
+
+ spin_lock_irqsave(&domain->lock, flags);
if (dev_data->alias != dev) {
alias_data = get_dev_data(dev_data->alias);
if (atomic_dec_and_test(&dev_data->bind))
do_detach(dev);
- spin_unlock_irqrestore(&dev_data->domain->lock, flags);
+ spin_unlock_irqrestore(&domain->lock, flags);
/*
* If we run in passthrough mode the device must be assigned to the
- * passthrough domain if it is detached from any other domain
+ * passthrough domain if it is detached from any other domain.
+ * Make sure we can deassign from the pt_domain itself.
*/
- if (iommu_pass_through && dev_data->domain == NULL)
+ if (iommu_pass_through &&
+ (dev_data->domain == NULL && domain != pt_domain))
__attach_device(dev, pt_domain);
}
/*
* The function which clues the AMD IOMMU driver into dma_ops.
*/
+
+void __init amd_iommu_init_api(void)
+{
+ register_iommu(&amd_iommu_ops);
+}
+
int __init amd_iommu_init_dma_ops(void)
{
struct amd_iommu *iommu;
/* Make the driver finally visible to the drivers */
dma_ops = &amd_iommu_dma_ops;
- register_iommu(&amd_iommu_ops);
-
amd_iommu_stats_init();
return 0;
ret = amd_iommu_init_passthrough();
else
ret = amd_iommu_init_dma_ops();
+
if (ret)
goto free;
+ amd_iommu_init_api();
+
amd_iommu_init_notifier();
enable_iommus();
#endif
enable_IR_x2apic();
-#ifdef CONFIG_X86_64
default_setup_apic_routing();
-#endif
verify_local_APIC();
connect_bsp_APIC();
if (apicid > max_physical_apicid)
max_physical_apicid = apicid;
-#ifdef CONFIG_X86_32
- if (num_processors > 8) {
- switch (boot_cpu_data.x86_vendor) {
- case X86_VENDOR_INTEL:
- if (!APIC_XAPIC(version)) {
- def_to_bigsmp = 0;
- break;
- }
- /* If P4 and above fall through */
- case X86_VENDOR_AMD:
- def_to_bigsmp = 1;
- }
- }
-#endif
-
#if defined(CONFIG_SMP) || defined(CONFIG_X86_64)
early_per_cpu(x86_cpu_to_apicid, cpu) = apicid;
early_per_cpu(x86_bios_cpu_apicid, cpu) = apicid;
}
late_initcall(print_ipi_mode);
-void default_setup_apic_routing(void)
+void __init default_setup_apic_routing(void)
+{
+ int version = apic_version[boot_cpu_physical_apicid];
+
+ if (num_possible_cpus() > 8) {
+ switch (boot_cpu_data.x86_vendor) {
+ case X86_VENDOR_INTEL:
+ if (!APIC_XAPIC(version)) {
+ def_to_bigsmp = 0;
+ break;
+ }
+ /* If P4 and above fall through */
+ case X86_VENDOR_AMD:
+ def_to_bigsmp = 1;
+ }
+ }
+
+#ifdef CONFIG_X86_BIGSMP
+ generic_bigsmp_probe();
+#endif
+
+ if (apic->setup_apic_routing)
+ apic->setup_apic_routing();
+}
+
+static void setup_apic_flat_routing(void)
{
#ifdef CONFIG_X86_IO_APIC
printk(KERN_INFO
.init_apic_ldr = default_init_apic_ldr,
.ioapic_phys_id_map = default_ioapic_phys_id_map,
- .setup_apic_routing = default_setup_apic_routing,
+ .setup_apic_routing = setup_apic_flat_routing,
.multi_timer_check = NULL,
.apicid_to_node = default_apicid_to_node,
.cpu_to_logical_apicid = default_cpu_to_logical_apicid,
}
#endif
- if (apic == &apic_flat && num_processors > 8)
+ if (apic == &apic_flat && num_possible_cpus() > 8)
apic = &apic_physflat;
printk(KERN_INFO "Setting APIC routing to %s\n", apic->name);
kfree(data->powernow_table);
kfree(data);
+ per_cpu(powernow_data, pol->cpu) = NULL;
return 0;
}
int err;
if (!data)
- return -EINVAL;
+ return 0;
smp_call_function_single(cpu, query_values_on_cpu, &err, true);
if (err)
return (va >= TASK_SIZE) && ((va + len - 1) >= TASK_SIZE);
}
-/*
- * Store a breakpoint's encoded address, length, and type.
- */
-static int arch_store_info(struct perf_event *bp)
-{
- struct arch_hw_breakpoint *info = counter_arch_bp(bp);
- /*
- * For kernel-addresses, either the address or symbol name can be
- * specified.
- */
- if (info->name)
- info->address = (unsigned long)
- kallsyms_lookup_name(info->name);
- if (info->address)
- return 0;
-
- return -EINVAL;
-}
-
int arch_bp_generic_fields(int x86_len, int x86_type,
int *gen_len, int *gen_type)
{
return ret;
}
- ret = arch_store_info(bp);
-
- if (ret < 0)
- return ret;
+ /*
+ * For kernel-addresses, either the address or symbol name can be
+ * specified.
+ */
+ if (info->name)
+ info->address = (unsigned long)
+ kallsyms_lookup_name(info->name);
/*
* Check that the low-order bits of the address are appropriate
* for the alignment implied by len.
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/nmi.h>
+#include <linux/hw_breakpoint.h>
#include <asm/debugreg.h>
#include <asm/apicdef.h>
static struct hw_breakpoint {
unsigned enabled;
- unsigned type;
- unsigned len;
unsigned long addr;
+ int len;
+ int type;
+ struct perf_event **pev;
} breakinfo[4];
static void kgdb_correct_hw_break(void)
{
- unsigned long dr7;
- int correctit = 0;
- int breakbit;
int breakno;
- get_debugreg(dr7, 7);
for (breakno = 0; breakno < 4; breakno++) {
- breakbit = 2 << (breakno << 1);
- if (!(dr7 & breakbit) && breakinfo[breakno].enabled) {
- correctit = 1;
- dr7 |= breakbit;
- dr7 &= ~(0xf0000 << (breakno << 2));
- dr7 |= ((breakinfo[breakno].len << 2) |
- breakinfo[breakno].type) <<
- ((breakno << 2) + 16);
- set_debugreg(breakinfo[breakno].addr, breakno);
-
- } else {
- if ((dr7 & breakbit) && !breakinfo[breakno].enabled) {
- correctit = 1;
- dr7 &= ~breakbit;
- dr7 &= ~(0xf0000 << (breakno << 2));
- }
- }
+ struct perf_event *bp;
+ struct arch_hw_breakpoint *info;
+ int val;
+ int cpu = raw_smp_processor_id();
+ if (!breakinfo[breakno].enabled)
+ continue;
+ bp = *per_cpu_ptr(breakinfo[breakno].pev, cpu);
+ info = counter_arch_bp(bp);
+ if (bp->attr.disabled != 1)
+ continue;
+ bp->attr.bp_addr = breakinfo[breakno].addr;
+ bp->attr.bp_len = breakinfo[breakno].len;
+ bp->attr.bp_type = breakinfo[breakno].type;
+ info->address = breakinfo[breakno].addr;
+ info->len = breakinfo[breakno].len;
+ info->type = breakinfo[breakno].type;
+ val = arch_install_hw_breakpoint(bp);
+ if (!val)
+ bp->attr.disabled = 0;
+ }
+ hw_breakpoint_restore();
+}
+
+static int hw_break_reserve_slot(int breakno)
+{
+ int cpu;
+ int cnt = 0;
+ struct perf_event **pevent;
+
+ for_each_online_cpu(cpu) {
+ cnt++;
+ pevent = per_cpu_ptr(breakinfo[breakno].pev, cpu);
+ if (dbg_reserve_bp_slot(*pevent))
+ goto fail;
+ }
+
+ return 0;
+
+fail:
+ for_each_online_cpu(cpu) {
+ cnt--;
+ if (!cnt)
+ break;
+ pevent = per_cpu_ptr(breakinfo[breakno].pev, cpu);
+ dbg_release_bp_slot(*pevent);
}
- if (correctit)
- set_debugreg(dr7, 7);
+ return -1;
+}
+
+static int hw_break_release_slot(int breakno)
+{
+ struct perf_event **pevent;
+ int cpu;
+
+ for_each_online_cpu(cpu) {
+ pevent = per_cpu_ptr(breakinfo[breakno].pev, cpu);
+ if (dbg_release_bp_slot(*pevent))
+ /*
+ * The debugger is responisble for handing the retry on
+ * remove failure.
+ */
+ return -1;
+ }
+ return 0;
}
static int
if (i == 4)
return -1;
+ if (hw_break_release_slot(i)) {
+ printk(KERN_ERR "Cannot remove hw breakpoint at %lx\n", addr);
+ return -1;
+ }
breakinfo[i].enabled = 0;
return 0;
static void kgdb_remove_all_hw_break(void)
{
int i;
+ int cpu = raw_smp_processor_id();
+ struct perf_event *bp;
- for (i = 0; i < 4; i++)
- memset(&breakinfo[i], 0, sizeof(struct hw_breakpoint));
+ for (i = 0; i < 4; i++) {
+ if (!breakinfo[i].enabled)
+ continue;
+ bp = *per_cpu_ptr(breakinfo[i].pev, cpu);
+ if (bp->attr.disabled == 1)
+ continue;
+ arch_uninstall_hw_breakpoint(bp);
+ bp->attr.disabled = 1;
+ }
}
static int
kgdb_set_hw_break(unsigned long addr, int len, enum kgdb_bptype bptype)
{
- unsigned type;
int i;
for (i = 0; i < 4; i++)
switch (bptype) {
case BP_HARDWARE_BREAKPOINT:
- type = 0;
- len = 1;
+ len = 1;
+ breakinfo[i].type = X86_BREAKPOINT_EXECUTE;
break;
case BP_WRITE_WATCHPOINT:
- type = 1;
+ breakinfo[i].type = X86_BREAKPOINT_WRITE;
break;
case BP_ACCESS_WATCHPOINT:
- type = 3;
+ breakinfo[i].type = X86_BREAKPOINT_RW;
break;
default:
return -1;
}
-
- if (len == 1 || len == 2 || len == 4)
- breakinfo[i].len = len - 1;
- else
+ switch (len) {
+ case 1:
+ breakinfo[i].len = X86_BREAKPOINT_LEN_1;
+ break;
+ case 2:
+ breakinfo[i].len = X86_BREAKPOINT_LEN_2;
+ break;
+ case 4:
+ breakinfo[i].len = X86_BREAKPOINT_LEN_4;
+ break;
+#ifdef CONFIG_X86_64
+ case 8:
+ breakinfo[i].len = X86_BREAKPOINT_LEN_8;
+ break;
+#endif
+ default:
return -1;
-
- breakinfo[i].enabled = 1;
+ }
breakinfo[i].addr = addr;
- breakinfo[i].type = type;
+ if (hw_break_reserve_slot(i)) {
+ breakinfo[i].addr = 0;
+ return -1;
+ }
+ breakinfo[i].enabled = 1;
return 0;
}
*/
void kgdb_disable_hw_debug(struct pt_regs *regs)
{
+ int i;
+ int cpu = raw_smp_processor_id();
+ struct perf_event *bp;
+
/* Disable hardware debugging while we are in kgdb: */
set_debugreg(0UL, 7);
+ for (i = 0; i < 4; i++) {
+ if (!breakinfo[i].enabled)
+ continue;
+ bp = *per_cpu_ptr(breakinfo[i].pev, cpu);
+ if (bp->attr.disabled == 1)
+ continue;
+ arch_uninstall_hw_breakpoint(bp);
+ bp->attr.disabled = 1;
+ }
}
/**
struct pt_regs *linux_regs)
{
unsigned long addr;
- unsigned long dr6;
char *ptr;
int newPC;
raw_smp_processor_id());
}
- get_debugreg(dr6, 6);
- if (!(dr6 & 0x4000)) {
- int breakno;
-
- for (breakno = 0; breakno < 4; breakno++) {
- if (dr6 & (1 << breakno) &&
- breakinfo[breakno].type == 0) {
- /* Set restore flag: */
- linux_regs->flags |= X86_EFLAGS_RF;
- break;
- }
- }
- }
- set_debugreg(0UL, 6);
kgdb_correct_hw_break();
return 0;
break;
case DIE_DEBUG:
- if (atomic_read(&kgdb_cpu_doing_single_step) ==
- raw_smp_processor_id()) {
+ if (atomic_read(&kgdb_cpu_doing_single_step) != -1) {
if (user_mode(regs))
return single_step_cont(regs, args);
break;
*/
int kgdb_arch_init(void)
{
- return register_die_notifier(&kgdb_notifier);
+ int i, cpu;
+ int ret;
+ struct perf_event_attr attr;
+ struct perf_event **pevent;
+
+ ret = register_die_notifier(&kgdb_notifier);
+ if (ret != 0)
+ return ret;
+ /*
+ * Pre-allocate the hw breakpoint structions in the non-atomic
+ * portion of kgdb because this operation requires mutexs to
+ * complete.
+ */
+ attr.bp_addr = (unsigned long)kgdb_arch_init;
+ attr.type = PERF_TYPE_BREAKPOINT;
+ attr.bp_len = HW_BREAKPOINT_LEN_1;
+ attr.bp_type = HW_BREAKPOINT_W;
+ attr.disabled = 1;
+ for (i = 0; i < 4; i++) {
+ breakinfo[i].pev = register_wide_hw_breakpoint(&attr, NULL);
+ if (IS_ERR(breakinfo[i].pev)) {
+ printk(KERN_ERR "kgdb: Could not allocate hw breakpoints\n");
+ breakinfo[i].pev = NULL;
+ kgdb_arch_exit();
+ return -1;
+ }
+ for_each_online_cpu(cpu) {
+ pevent = per_cpu_ptr(breakinfo[i].pev, cpu);
+ pevent[0]->hw.sample_period = 1;
+ if (pevent[0]->destroy != NULL) {
+ pevent[0]->destroy = NULL;
+ release_bp_slot(*pevent);
+ }
+ }
+ }
+ return ret;
}
/**
*/
void kgdb_arch_exit(void)
{
+ int i;
+ for (i = 0; i < 4; i++) {
+ if (breakinfo[i].pev) {
+ unregister_wide_hw_breakpoint(breakinfo[i].pev);
+ breakinfo[i].pev = NULL;
+ }
+ }
unregister_die_notifier(&kgdb_notifier);
}
x86_init.mpparse.mpc_record(1);
}
-#ifdef CONFIG_X86_BIGSMP
- generic_bigsmp_probe();
-#endif
-
- if (apic->setup_apic_routing)
- apic->setup_apic_routing();
-
if (!num_processors)
printk(KERN_ERR "MPTABLE: no processors registered!\n");
return num_processors;
/* Make sure to be in 32bit mode */
set_thread_flag(TIF_IA32);
+ current->personality |= force_personality32;
/* Prepare the first "return" to user space */
current_thread_info()->status |= TS_COMPAT;
} else if (n == 6) {
val = thread->debugreg6;
} else if (n == 7) {
- val = ptrace_get_dr7(thread->ptrace_bps);
+ val = thread->ptrace_dr7;
}
return val;
}
return rc;
}
/* All that's left is DR7 */
- if (n == 7)
+ if (n == 7) {
rc = ptrace_write_dr7(tsk, val);
+ if (!rc)
+ thread->ptrace_dr7 = val;
+ }
ret_path:
return rc;
DMI_MATCH(DMI_BOARD_NAME, "0T656F"),
},
},
+ { /* Handle problems with rebooting on Dell OptiPlex 760 with 0G919G*/
+ .callback = set_bios_reboot,
+ .ident = "Dell OptiPlex 760",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 760"),
+ DMI_MATCH(DMI_BOARD_NAME, "0G919G"),
+ },
+ },
{ /* Handle problems with rebooting on Dell 2400's */
.callback = set_bios_reboot,
.ident = "Dell PowerEdge 2400",
DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix/MSC"),
},
},
- {
/*
- * AMI BIOS with low memory corruption was found on Intel DG45ID board.
- * It hase different DMI_BIOS_VENDOR = "Intel Corp.", for now we will
+ * AMI BIOS with low memory corruption was found on Intel DG45ID and
+ * DG45FC boards.
+ * It has a different DMI_BIOS_VENDOR = "Intel Corp.", for now we will
* match only DMI_BOARD_NAME and see if there is more bad products
* with this vendor.
*/
+ {
.callback = dmi_low_memory_corruption,
.ident = "AMI BIOS",
.matches = {
DMI_MATCH(DMI_BOARD_NAME, "DG45ID"),
},
},
+ {
+ .callback = dmi_low_memory_corruption,
+ .ident = "AMI BIOS",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "DG45FC"),
+ },
+ },
#endif
{}
};
set_cpu_sibling_map(0);
enable_IR_x2apic();
-#ifdef CONFIG_X86_64
default_setup_apic_routing();
-#endif
if (smp_sanity_check(max_cpus) < 0) {
printk(KERN_INFO "SMP disabled\n");
/*
* Read the RTC.
+ *
+ * Starting with HUB rev 2.0, the UV RTC register is replicated across all
+ * cachelines of it's own page. This allows faster simultaneous reads
+ * from a given socket.
*/
static cycle_t uv_read_rtc(struct clocksource *cs)
{
- return (cycle_t)uv_read_local_mmr(UVH_RTC);
+ unsigned long offset;
+
+ if (uv_get_min_hub_revision_id() == 1)
+ offset = 0;
+ else
+ offset = (uv_blade_processor_id() * L1_CACHE_BYTES) % PAGE_SIZE;
+
+ return (cycle_t)uv_read_local_mmr(UVH_RTC | offset);
}
/*
return -EOPNOTSUPP;
addr &= KVM_PIT_CHANNEL_MASK;
+ if (addr == 3)
+ return 0;
+
s = &pit_state->channels[addr];
mutex_lock(&pit_state->lock);
{
static int version;
struct pvclock_wall_clock wc;
- struct timespec now, sys, boot;
+ struct timespec boot;
if (!wall_clock)
return;
* wall clock specified here. guest system time equals host
* system time for us, thus we must fill in host boot time here.
*/
- now = current_kernel_time();
- ktime_get_ts(&sys);
- boot = ns_to_timespec(timespec_to_ns(&now) - timespec_to_ns(&sys));
+ getboottime(&boot);
wc.sec = boot.tv_sec;
wc.nsec = boot.tv_nsec;
local_irq_save(flags);
kvm_get_msr(v, MSR_IA32_TSC, &vcpu->hv_clock.tsc_timestamp);
ktime_get_ts(&ts);
+ monotonic_to_bootbased(&ts);
local_irq_restore(flags);
/* With all the info we got, fill in the values */
#else
/*
* With get_user_pages_fast, we walk down the pagetables without taking
- * any locks. For this we would like to load the pointers atoimcally,
+ * any locks. For this we would like to load the pointers atomically,
* but that is not possible (without expensive cmpxchg8b) on PAE. What
* we do have is the guarantee that a pte will only either go from not
* present to present, or present to not present or both -- it will not
#include <asm/numa.h>
#include <asm/cacheflush.h>
#include <asm/init.h>
+#include <linux/bootmem.h>
static unsigned long dma_reserve __initdata;
* Memory hotplug specific functions
*/
#ifdef CONFIG_MEMORY_HOTPLUG
+/*
+ * After memory hotplug the variables max_pfn, max_low_pfn and high_memory need
+ * updating.
+ */
+static void update_end_of_memory_vars(u64 start, u64 size)
+{
+ unsigned long end_pfn = PFN_UP(start + size);
+
+ if (end_pfn > max_pfn) {
+ max_pfn = end_pfn;
+ max_low_pfn = end_pfn;
+ high_memory = (void *)__va(max_pfn * PAGE_SIZE - 1) + 1;
+ }
+}
+
/*
* Memory is added always to NORMAL zone. This means you will never get
* additional DMA/DMA32 memory.
ret = __add_pages(nid, zone, start_pfn, nr_pages);
WARN_ON_ONCE(ret);
+ /* update max_pfn, max_low_pfn and high_memory */
+ update_end_of_memory_vars(start, size);
+
return ret;
}
EXPORT_SYMBOL_GPL(arch_add_memory);
/* move to next set */
si += model->num_counters;
- if ((si > model->num_virt_counters) || (counter_config[si].count == 0))
+ if ((si >= model->num_virt_counters) || (counter_config[si].count == 0))
per_cpu(switch_index, cpu) = 0;
else
per_cpu(switch_index, cpu) = si;
case 15: case 23:
*cpu_type = "i386/core_2";
break;
+ case 0x2e:
case 26:
spec = &op_arch_perfmon_spec;
*cpu_type = "i386/core_i7";
return -EINVAL;
blkcg = cgroup_to_blkio_cgroup(cgroup);
+ spin_lock(&blkio_list_lock);
spin_lock_irq(&blkcg->lock);
blkcg->weight = (unsigned int)val;
hlist_for_each_entry(blkg, n, &blkcg->blkg_list, blkcg_node) {
- spin_lock(&blkio_list_lock);
list_for_each_entry(blkiop, &blkio_list, list)
blkiop->ops.blkio_update_group_weight_fn(blkg,
blkcg->weight);
- spin_unlock(&blkio_list_lock);
}
spin_unlock_irq(&blkcg->lock);
+ spin_unlock(&blkio_list_lock);
return 0;
}
*/
static inline bool queue_should_plug(struct request_queue *q)
{
- return !(blk_queue_nonrot(q) && blk_queue_queuing(q));
+ return !(blk_queue_nonrot(q) && blk_queue_tagged(q));
}
static int __make_request(struct request_queue *q, struct bio *bio)
* and to it is freed is accounted as io that is in progress at
* the driver side.
*/
- if (blk_account_rq(rq)) {
+ if (blk_account_rq(rq))
q->in_flight[rq_is_sync(rq)]++;
- /*
- * Mark this device as supporting hardware queuing, if
- * we have more IOs in flight than 4.
- */
- if (!blk_queue_queuing(q) && queue_in_flight(q) > 4)
- set_bit(QUEUE_FLAG_CQ, &q->queue_flags);
- }
}
/**
*/
#define CFQ_MIN_TT (2)
-/*
- * Allow merged cfqqs to perform this amount of seeky I/O before
- * deciding to break the queues up again.
- */
-#define CFQQ_COOP_TOUT (HZ)
-
#define CFQ_SLICE_SCALE (5)
#define CFQ_HW_QUEUE_MIN (5)
#define CFQ_SERVICE_SHIFT 12
+#define CFQQ_SEEK_THR 8 * 1024
+#define CFQQ_SEEKY(cfqq) ((cfqq)->seek_mean > CFQQ_SEEK_THR)
+
#define RQ_CIC(rq) \
((struct cfq_io_context *) (rq)->elevator_private)
#define RQ_CFQQ(rq) (struct cfq_queue *) ((rq)->elevator_private2)
u64 seek_total;
sector_t seek_mean;
sector_t last_request_pos;
- unsigned long seeky_start;
pid_t pid;
CFQ_CFQQ_FLAG_slice_new, /* no requests dispatched in slice */
CFQ_CFQQ_FLAG_sync, /* synchronous queue */
CFQ_CFQQ_FLAG_coop, /* cfqq is shared */
+ CFQ_CFQQ_FLAG_split_coop, /* shared cfqq will be splitted */
CFQ_CFQQ_FLAG_deep, /* sync cfqq experienced large depth */
CFQ_CFQQ_FLAG_wait_busy, /* Waiting for next request */
};
CFQ_CFQQ_FNS(slice_new);
CFQ_CFQQ_FNS(sync);
CFQ_CFQQ_FNS(coop);
+CFQ_CFQQ_FNS(split_coop);
CFQ_CFQQ_FNS(deep);
CFQ_CFQQ_FNS(wait_busy);
#undef CFQ_CFQQ_FNS
cfq_clear_cfqq_wait_request(cfqq);
cfq_clear_cfqq_wait_busy(cfqq);
+ /*
+ * If this cfqq is shared between multiple processes, check to
+ * make sure that those processes are still issuing I/Os within
+ * the mean seek distance. If not, it may be time to break the
+ * queues apart again.
+ */
+ if (cfq_cfqq_coop(cfqq) && CFQQ_SEEKY(cfqq))
+ cfq_mark_cfqq_split_coop(cfqq);
+
/*
* store what was left of this slice, if the queue idled/timed out
*/
return cfqd->last_position - blk_rq_pos(rq);
}
-#define CFQQ_SEEK_THR 8 * 1024
-#define CFQQ_SEEKY(cfqq) ((cfqq)->seek_mean > CFQQ_SEEK_THR)
-
static inline int cfq_rq_close(struct cfq_data *cfqd, struct cfq_queue *cfqq,
struct request *rq, bool for_preempt)
{
* Otherwise, we do only if they are the last ones
* in their service tree.
*/
- return service_tree->count == 1;
+ return service_tree->count == 1 && cfq_cfqq_sync(cfqq);
}
static void cfq_arm_slice_timer(struct cfq_data *cfqd)
total = cfqq->seek_total + (cfqq->seek_samples/2);
do_div(total, cfqq->seek_samples);
cfqq->seek_mean = (sector_t)total;
-
- /*
- * If this cfqq is shared between multiple processes, check to
- * make sure that those processes are still issuing I/Os within
- * the mean seek distance. If not, it may be time to break the
- * queues apart again.
- */
- if (cfq_cfqq_coop(cfqq)) {
- if (CFQQ_SEEKY(cfqq) && !cfqq->seeky_start)
- cfqq->seeky_start = jiffies;
- else if (!CFQQ_SEEKY(cfqq))
- cfqq->seeky_start = 0;
- }
}
/*
return cic_to_cfqq(cic, 1);
}
-static int should_split_cfqq(struct cfq_queue *cfqq)
-{
- if (cfqq->seeky_start &&
- time_after(jiffies, cfqq->seeky_start + CFQQ_COOP_TOUT))
- return 1;
- return 0;
-}
-
/*
* Returns NULL if a new cfqq should be allocated, or the old cfqq if this
* was the last process referring to said cfqq.
split_cfqq(struct cfq_io_context *cic, struct cfq_queue *cfqq)
{
if (cfqq_process_refs(cfqq) == 1) {
- cfqq->seeky_start = 0;
cfqq->pid = current->pid;
cfq_clear_cfqq_coop(cfqq);
+ cfq_clear_cfqq_split_coop(cfqq);
return cfqq;
}
/*
* If the queue was seeky for too long, break it apart.
*/
- if (cfq_cfqq_coop(cfqq) && should_split_cfqq(cfqq)) {
+ if (cfq_cfqq_coop(cfqq) && cfq_cfqq_split_coop(cfqq)) {
cfq_log_cfqq(cfqd, cfqq, "breaking apart cfqq");
cfqq = split_cfqq(cic, cfqq);
if (!cfqq)
struct platform_device *dd;
id = dock_station_count;
+ memset(&ds, 0, sizeof(ds));
dd = platform_device_register_data(NULL, "dock", id, &ds, sizeof(ds));
if (IS_ERR(dd))
return PTR_ERR(dd);
DMI_MATCH(DMI_BIOS_VENDOR,"Phoenix Technologies LTD"),
DMI_MATCH(DMI_BIOS_VERSION,"SHE845M0.86C.0013.D.0302131307")},
(void *)2},
+ { set_max_cstate, "Pavilion zv5000", {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME,"Pavilion zv5000 (DS502A#ABA)")},
+ (void *)1},
+ { set_max_cstate, "Asus L8400B", {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME,"L8400B series Notebook PC")},
+ (void *)1},
{},
};
return(acpi_idle_enter_c1(dev, state));
local_irq_disable();
- current_thread_info()->status &= ~TS_POLLING;
- /*
- * TS_POLLING-cleared state must be visible before we test
- * NEED_RESCHED:
- */
- smp_mb();
+ if (cx->entry_method != ACPI_CSTATE_FFH) {
+ current_thread_info()->status &= ~TS_POLLING;
+ /*
+ * TS_POLLING-cleared state must be visible before we test
+ * NEED_RESCHED:
+ */
+ smp_mb();
+ }
if (unlikely(need_resched())) {
current_thread_info()->status |= TS_POLLING;
}
local_irq_disable();
- current_thread_info()->status &= ~TS_POLLING;
- /*
- * TS_POLLING-cleared state must be visible before we test
- * NEED_RESCHED:
- */
- smp_mb();
+ if (cx->entry_method != ACPI_CSTATE_FFH) {
+ current_thread_info()->status &= ~TS_POLLING;
+ /*
+ * TS_POLLING-cleared state must be visible before we test
+ * NEED_RESCHED:
+ */
+ smp_mb();
+ }
if (unlikely(need_resched())) {
current_thread_info()->status |= TS_POLLING;
return status;
}
+static int early_pdc_done;
+
void acpi_processor_set_pdc(acpi_handle handle)
{
struct acpi_object_list *obj_list;
if (arch_has_acpi_pdc() == false)
return;
+ if (early_pdc_done)
+ return;
+
obj_list = acpi_processor_alloc_pdc();
if (!obj_list)
return;
return 0;
}
+static int param_early_pdc_optin(char *s)
+{
+ early_pdc_optin = 1;
+ return 1;
+}
+__setup("acpi_early_pdc_eval", param_early_pdc_optin);
+
static struct dmi_system_id __cpuinitdata early_pdc_optin_table[] = {
{
set_early_pdc_optin, "HP Envy", {
acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT,
ACPI_UINT32_MAX,
early_init_pdc, NULL, NULL, NULL);
+
+ early_pdc_done = 1;
}
if (result)
goto update_bios;
- return 0;
+ /* We need to call _PPC once when cpufreq starts */
+ if (ignore_ppc != 1)
+ result = acpi_processor_get_platform_limit(pr);
+
+ return result;
/*
* Having _PPC but missing frequencies (_PSS, _PCT) is a very good hint that
if (child)
*child = device;
- return 0;
+
+ if (device)
+ return 0;
+ else
+ return -ENODEV;
}
+/*
+ * acpi_bus_add and acpi_bus_start
+ *
+ * scan a given ACPI tree and (probably recently hot-plugged)
+ * create and add or starts found devices.
+ *
+ * If no devices were found -ENODEV is returned which does not
+ * mean that this is a real error, there just have been no suitable
+ * ACPI objects in the table trunk from which the kernel could create
+ * a device and add/start an appropriate driver.
+ */
+
int
acpi_bus_add(struct acpi_device **child,
struct acpi_device *parent, acpi_handle handle, int type)
memset(&ops, 0, sizeof(ops));
ops.acpi_op_add = 1;
- acpi_bus_scan(handle, &ops, child);
- return 0;
+ return acpi_bus_scan(handle, &ops, child);
}
EXPORT_SYMBOL(acpi_bus_add);
{
struct acpi_bus_ops ops;
+ if (!device)
+ return -EINVAL;
+
memset(&ops, 0, sizeof(ops));
ops.acpi_op_start = 1;
- acpi_bus_scan(device->handle, &ops, NULL);
- return 0;
+ return acpi_bus_scan(device->handle, &ops, NULL);
}
EXPORT_SYMBOL(acpi_bus_start);
unsigned long table_end;
acpi_size tbl_size;
- if (acpi_disabled)
+ if (acpi_disabled && !acpi_ht)
return -ENODEV;
if (!handler)
struct acpi_table_header *table = NULL;
acpi_size tbl_size;
- if (acpi_disabled)
+ if (acpi_disabled && !acpi_ht)
return -ENODEV;
if (!handler)
},
.driver_data = "F.23", /* cutoff BIOS version */
},
+ /*
+ * Acer eMachines G725 has the same problem. BIOS
+ * V1.03 is known to be broken. V3.04 is known to
+ * work. Inbetween, there are V1.06, V2.06 and V3.03
+ * that we don't have much idea about. For now,
+ * blacklist anything older than V3.04.
+ */
+ {
+ .ident = "G725",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "eMachines"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "eMachines G725"),
+ },
+ .driver_data = "V3.04", /* cutoff BIOS version */
+ },
{ } /* terminate list */
};
const struct dmi_system_id *dmi = dmi_first_match(sysids);
ahci_save_initial_config(pdev, hpriv);
/* prepare host */
- if (hpriv->cap & HOST_CAP_NCQ)
- pi.flags |= ATA_FLAG_NCQ | ATA_FLAG_FPDMA_AA;
+ if (hpriv->cap & HOST_CAP_NCQ) {
+ pi.flags |= ATA_FLAG_NCQ;
+ /* Auto-activate optimization is supposed to be supported on
+ all AHCI controllers indicating NCQ support, but it seems
+ to be broken at least on some NVIDIA MCP79 chipsets.
+ Until we get info on which NVIDIA chipsets don't have this
+ issue, if any, disable AA on all NVIDIA AHCIs. */
+ if (pdev->vendor != PCI_VENDOR_ID_NVIDIA)
+ pi.flags |= ATA_FLAG_FPDMA_AA;
+ }
if (hpriv->cap & HOST_CAP_PMP)
pi.flags |= ATA_FLAG_PMP;
* write indication (used for PIO/DMA setup), result TF is
* copied back and we don't whine too much about its failure.
*/
- tf->flags = ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+ tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
if (scmd->sc_data_direction == DMA_TO_DEVICE)
tf->flags |= ATA_TFLAG_WRITE;
do_write);
}
+ if (!do_write)
+ flush_dcache_page(page);
+
qc->curbytes += qc->sect_size;
qc->cursg_ofs += qc->sect_size;
else
pr_debug("class '%s' does not have a release() function, "
"be careful\n", class->name);
+
+ kfree(cp);
}
static struct sysfs_ops class_sysfs_ops = {
if (*pos > h->highest_lun)
return 0;
+ if (drv == NULL) /* it's possible for h->drv[] to have holes. */
+ return 0;
+
if (drv->heads == 0)
return 0;
goto out_no_q;
mdev->rq_queue = q;
q->queuedata = mdev;
- blk_queue_max_segment_size(q, DRBD_MAX_SEGMENT_SIZE);
disk = alloc_disk(1);
if (!disk)
q->backing_dev_info.congested_data = mdev;
blk_queue_make_request(q, drbd_make_request_26);
+ blk_queue_max_segment_size(q, DRBD_MAX_SEGMENT_SIZE);
blk_queue_bounce_limit(q, BLK_BOUNCE_ANY);
blk_queue_merge_bvec(q, drbd_merge_bvec);
q->queue_lock = &mdev->req_lock; /* needed since we use */
epoch = kmalloc(sizeof(struct drbd_epoch), GFP_NOIO);
if (!epoch) {
dev_warn(DEV, "Allocation of an epoch failed, slowing down\n");
- issue_flush = !test_and_set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &epoch->flags);
+ issue_flush = !test_and_set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &mdev->current_epoch->flags);
drbd_wait_ee_list_empty(mdev, &mdev->active_ee);
if (issue_flush) {
rv = drbd_flush_after_epoch(mdev, mdev->current_epoch);
pkt_kobj_remove(pd->kobj_stat);
pkt_kobj_remove(pd->kobj_wqueue);
if (class_pktcdvd)
- device_destroy(class_pktcdvd, pd->pkt_dev);
+ device_unregister(pd->dev);
}
static int __devinit virtblk_probe(struct virtio_device *vdev)
{
struct virtio_blk *vblk;
+ struct request_queue *q;
int err;
u64 cap;
- u32 v;
- u32 blk_size, sg_elems;
+ u32 v, blk_size, sg_elems, opt_io_size;
+ u16 min_io_size;
+ u8 physical_block_exp, alignment_offset;
if (index_to_minor(index) >= 1 << MINORBITS)
return -ENOSPC;
goto out_mempool;
}
- vblk->disk->queue = blk_init_queue(do_virtblk_request, &vblk->lock);
- if (!vblk->disk->queue) {
+ q = vblk->disk->queue = blk_init_queue(do_virtblk_request, &vblk->lock);
+ if (!q) {
err = -ENOMEM;
goto out_put_disk;
}
- vblk->disk->queue->queuedata = vblk;
+ q->queuedata = vblk;
if (index < 26) {
sprintf(vblk->disk->disk_name, "vd%c", 'a' + index % 26);
/* If barriers are supported, tell block layer that queue is ordered */
if (virtio_has_feature(vdev, VIRTIO_BLK_F_FLUSH))
- blk_queue_ordered(vblk->disk->queue, QUEUE_ORDERED_DRAIN_FLUSH,
+ blk_queue_ordered(q, QUEUE_ORDERED_DRAIN_FLUSH,
virtblk_prepare_flush);
else if (virtio_has_feature(vdev, VIRTIO_BLK_F_BARRIER))
- blk_queue_ordered(vblk->disk->queue, QUEUE_ORDERED_TAG, NULL);
+ blk_queue_ordered(q, QUEUE_ORDERED_TAG, NULL);
/* If disk is read-only in the host, the guest should obey */
if (virtio_has_feature(vdev, VIRTIO_BLK_F_RO))
set_capacity(vblk->disk, cap);
/* We can handle whatever the host told us to handle. */
- blk_queue_max_phys_segments(vblk->disk->queue, vblk->sg_elems-2);
- blk_queue_max_hw_segments(vblk->disk->queue, vblk->sg_elems-2);
+ blk_queue_max_phys_segments(q, vblk->sg_elems-2);
+ blk_queue_max_hw_segments(q, vblk->sg_elems-2);
/* No need to bounce any requests */
- blk_queue_bounce_limit(vblk->disk->queue, BLK_BOUNCE_ANY);
+ blk_queue_bounce_limit(q, BLK_BOUNCE_ANY);
/* No real sector limit. */
- blk_queue_max_sectors(vblk->disk->queue, -1U);
+ blk_queue_max_sectors(q, -1U);
/* Host can optionally specify maximum segment size and number of
* segments. */
offsetof(struct virtio_blk_config, size_max),
&v);
if (!err)
- blk_queue_max_segment_size(vblk->disk->queue, v);
+ blk_queue_max_segment_size(q, v);
else
- blk_queue_max_segment_size(vblk->disk->queue, -1U);
+ blk_queue_max_segment_size(q, -1U);
/* Host can optionally specify the block size of the device */
err = virtio_config_val(vdev, VIRTIO_BLK_F_BLK_SIZE,
offsetof(struct virtio_blk_config, blk_size),
&blk_size);
if (!err)
- blk_queue_logical_block_size(vblk->disk->queue, blk_size);
+ blk_queue_logical_block_size(q, blk_size);
+ else
+ blk_size = queue_logical_block_size(q);
+
+ /* Use topology information if available */
+ err = virtio_config_val(vdev, VIRTIO_BLK_F_TOPOLOGY,
+ offsetof(struct virtio_blk_config, physical_block_exp),
+ &physical_block_exp);
+ if (!err && physical_block_exp)
+ blk_queue_physical_block_size(q,
+ blk_size * (1 << physical_block_exp));
+
+ err = virtio_config_val(vdev, VIRTIO_BLK_F_TOPOLOGY,
+ offsetof(struct virtio_blk_config, alignment_offset),
+ &alignment_offset);
+ if (!err && alignment_offset)
+ blk_queue_alignment_offset(q, blk_size * alignment_offset);
+
+ err = virtio_config_val(vdev, VIRTIO_BLK_F_TOPOLOGY,
+ offsetof(struct virtio_blk_config, min_io_size),
+ &min_io_size);
+ if (!err && min_io_size)
+ blk_queue_io_min(q, blk_size * min_io_size);
+
+ err = virtio_config_val(vdev, VIRTIO_BLK_F_TOPOLOGY,
+ offsetof(struct virtio_blk_config, opt_io_size),
+ &opt_io_size);
+ if (!err && opt_io_size)
+ blk_queue_io_opt(q, blk_size * opt_io_size);
+
add_disk(vblk->disk);
return 0;
static unsigned int features[] = {
VIRTIO_BLK_F_BARRIER, VIRTIO_BLK_F_SEG_MAX, VIRTIO_BLK_F_SIZE_MAX,
VIRTIO_BLK_F_GEOMETRY, VIRTIO_BLK_F_RO, VIRTIO_BLK_F_BLK_SIZE,
- VIRTIO_BLK_F_SCSI, VIRTIO_BLK_F_FLUSH
+ VIRTIO_BLK_F_SCSI, VIRTIO_BLK_F_FLUSH, VIRTIO_BLK_F_TOPOLOGY
};
/*
Say Y here to compile support for Marvell BT-over-SDIO driver
into the kernel or say M to compile it as module.
-endmenu
+config BT_ATH3K
+ tristate "Atheros firmware download driver"
+ depends on BT_HCIBTUSB
+ select FW_LOADER
+ help
+ Bluetooth firmware download driver.
+ This driver loads the firmware into the Atheros Bluetooth
+ chipset.
+ Say Y here to compile support for "Atheros firmware download driver"
+ into the kernel or say M to compile it as module (ath3k).
+
+endmenu
obj-$(CONFIG_BT_HCIBTUSB) += btusb.o
obj-$(CONFIG_BT_HCIBTSDIO) += btsdio.o
+obj-$(CONFIG_BT_ATH3K) += ath3k.o
obj-$(CONFIG_BT_MRVL) += btmrvl.o
obj-$(CONFIG_BT_MRVL_SDIO) += btmrvl_sdio.o
--- /dev/null
+/*
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/device.h>
+#include <linux/firmware.h>
+#include <linux/usb.h>
+#include <net/bluetooth/bluetooth.h>
+
+#define VERSION "1.0"
+
+
+static struct usb_device_id ath3k_table[] = {
+ /* Atheros AR3011 */
+ { USB_DEVICE(0x0CF3, 0x3000) },
+ { } /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, ath3k_table);
+
+#define USB_REQ_DFU_DNLOAD 1
+#define BULK_SIZE 4096
+
+struct ath3k_data {
+ struct usb_device *udev;
+ u8 *fw_data;
+ u32 fw_size;
+ u32 fw_sent;
+};
+
+static int ath3k_load_firmware(struct ath3k_data *data,
+ unsigned char *firmware,
+ int count)
+{
+ u8 *send_buf;
+ int err, pipe, len, size, sent = 0;
+
+ BT_DBG("ath3k %p udev %p", data, data->udev);
+
+ pipe = usb_sndctrlpipe(data->udev, 0);
+
+ if ((usb_control_msg(data->udev, pipe,
+ USB_REQ_DFU_DNLOAD,
+ USB_TYPE_VENDOR, 0, 0,
+ firmware, 20, USB_CTRL_SET_TIMEOUT)) < 0) {
+ BT_ERR("Can't change to loading configuration err");
+ return -EBUSY;
+ }
+ sent += 20;
+ count -= 20;
+
+ send_buf = kmalloc(BULK_SIZE, GFP_ATOMIC);
+ if (!send_buf) {
+ BT_ERR("Can't allocate memory chunk for firmware");
+ return -ENOMEM;
+ }
+
+ while (count) {
+ size = min_t(uint, count, BULK_SIZE);
+ pipe = usb_sndbulkpipe(data->udev, 0x02);
+ memcpy(send_buf, firmware + sent, size);
+
+ err = usb_bulk_msg(data->udev, pipe, send_buf, size,
+ &len, 3000);
+
+ if (err || (len != size)) {
+ BT_ERR("Error in firmware loading err = %d,"
+ "len = %d, size = %d", err, len, size);
+ goto error;
+ }
+
+ sent += size;
+ count -= size;
+ }
+
+ kfree(send_buf);
+ return 0;
+
+error:
+ kfree(send_buf);
+ return err;
+}
+
+static int ath3k_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ const struct firmware *firmware;
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct ath3k_data *data;
+ int size;
+
+ BT_DBG("intf %p id %p", intf, id);
+
+ if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
+ return -ENODEV;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->udev = udev;
+
+ if (request_firmware(&firmware, "ath3k-1.fw", &udev->dev) < 0) {
+ kfree(data);
+ return -EIO;
+ }
+
+ size = max_t(uint, firmware->size, 4096);
+ data->fw_data = kmalloc(size, GFP_KERNEL);
+ if (!data->fw_data) {
+ release_firmware(firmware);
+ kfree(data);
+ return -ENOMEM;
+ }
+
+ memcpy(data->fw_data, firmware->data, firmware->size);
+ data->fw_size = firmware->size;
+ data->fw_sent = 0;
+ release_firmware(firmware);
+
+ usb_set_intfdata(intf, data);
+ if (ath3k_load_firmware(data, data->fw_data, data->fw_size)) {
+ usb_set_intfdata(intf, NULL);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static void ath3k_disconnect(struct usb_interface *intf)
+{
+ struct ath3k_data *data = usb_get_intfdata(intf);
+
+ BT_DBG("ath3k_disconnect intf %p", intf);
+
+ kfree(data->fw_data);
+ kfree(data);
+}
+
+static struct usb_driver ath3k_driver = {
+ .name = "ath3k",
+ .probe = ath3k_probe,
+ .disconnect = ath3k_disconnect,
+ .id_table = ath3k_table,
+};
+
+static int __init ath3k_init(void)
+{
+ BT_INFO("Atheros AR30xx firmware driver ver %s", VERSION);
+ return usb_register(&ath3k_driver);
+}
+
+static void __exit ath3k_exit(void)
+{
+ usb_deregister(&ath3k_driver);
+}
+
+module_init(ath3k_init);
+module_exit(ath3k_exit);
+
+MODULE_AUTHOR("Atheros Communications");
+MODULE_DESCRIPTION("Atheros AR30xx firmware driver");
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("ath3k-1.fw");
unsigned int iobase;
unsigned char reg;
- BUG_ON(!info->hdev);
+ if (!info || !info->hdev)
+ /* our irq handler is shared */
+ return IRQ_NONE;
if (!test_bit(CARD_READY, &(info->hw_state)))
return IRQ_HANDLED;
int iir;
irqreturn_t r = IRQ_NONE;
- BUG_ON(!info->hdev);
+ if (!info || !info->hdev)
+ /* our irq handler is shared */
+ return IRQ_NONE;
iobase = info->p_dev->io.BasePort1;
exit:
sdio_release_host(card->func);
+ kfree(tmpbuf);
return ret;
}
int iir, lsr;
irqreturn_t r = IRQ_NONE;
- BUG_ON(!info->hdev);
+ if (!info || !info->hdev)
+ /* our irq handler is shared */
+ return IRQ_NONE;
iobase = info->p_dev->io.BasePort1;
int iir, lsr;
irqreturn_t r = IRQ_NONE;
- BUG_ON(!info->hdev);
+ if (!info || !info->hdev)
+ /* our irq handler is shared */
+ return IRQ_NONE;
iobase = info->p_dev->io.BasePort1;
help
Virtio console for use with lguest and other hypervisors.
+ Also serves as a general-purpose serial device for data
+ transfer between the guest and host. Character devices at
+ /dev/vportNpn will be created when corresponding ports are
+ found, where N is the device number and n is the port number
+ within that device. If specified by the host, a sysfs
+ attribute called 'name' will be populated with a name for
+ the port which can be used by udev scripts to create a
+ symlink to the device.
config HVCS
tristate "IBM Hypervisor Virtual Console Server support"
if (agp_off)
return -EINVAL;
- if (gart_iommu_aperture)
- return agp_bridges_found ? 0 : -ENODEV;
-
err = pci_register_driver(&agp_amd64_pci_driver);
if (err < 0)
return err;
return err;
}
+static int __init agp_amd64_mod_init(void)
+{
+#ifndef MODULE
+ if (gart_iommu_aperture)
+ return agp_bridges_found ? 0 : -ENODEV;
+#endif
+ return agp_amd64_init();
+}
+
static void __exit agp_amd64_cleanup(void)
{
+#ifndef MODULE
if (gart_iommu_aperture)
return;
+#endif
if (aperture_resource)
release_resource(aperture_resource);
pci_unregister_driver(&agp_amd64_pci_driver);
}
-module_init(agp_amd64_init);
+module_init(agp_amd64_mod_init);
module_exit(agp_amd64_cleanup);
MODULE_AUTHOR("Dave Jones <davej@redhat.com>, Andi Kleen");
return cnt;
}
-static struct hv_ops hvc_beat_get_put_ops = {
+static const struct hv_ops hvc_beat_get_put_ops = {
.get_chars = hvc_beat_get_chars,
.put_chars = hvc_beat_put_chars,
};
* console interfaces but can still be used as a tty device. This has to be
* static because kmalloc will not work during early console init.
*/
-static struct hv_ops *cons_ops[MAX_NR_HVC_CONSOLES];
+static const struct hv_ops *cons_ops[MAX_NR_HVC_CONSOLES];
static uint32_t vtermnos[MAX_NR_HVC_CONSOLES] =
{[0 ... MAX_NR_HVC_CONSOLES - 1] = -1};
* vty adapters do NOT get an hvc_instantiate() callback since they
* appear after early console init.
*/
-int hvc_instantiate(uint32_t vtermno, int index, struct hv_ops *ops)
+int hvc_instantiate(uint32_t vtermno, int index, const struct hv_ops *ops)
{
struct hvc_struct *hp;
};
struct hvc_struct __devinit *hvc_alloc(uint32_t vtermno, int data,
- struct hv_ops *ops, int outbuf_size)
+ const struct hv_ops *ops,
+ int outbuf_size)
{
struct hvc_struct *hp;
int i;
int outbuf_size;
int n_outbuf;
uint32_t vtermno;
- struct hv_ops *ops;
+ const struct hv_ops *ops;
int irq_requested;
int data;
struct winsize ws;
};
/* Register a vterm and a slot index for use as a console (console_init) */
-extern int hvc_instantiate(uint32_t vtermno, int index, struct hv_ops *ops);
+extern int hvc_instantiate(uint32_t vtermno, int index,
+ const struct hv_ops *ops);
/* register a vterm for hvc tty operation (module_init or hotplug add) */
extern struct hvc_struct * __devinit hvc_alloc(uint32_t vtermno, int data,
- struct hv_ops *ops, int outbuf_size);
+ const struct hv_ops *ops, int outbuf_size);
/* remove a vterm from hvc tty operation (module_exit or hotplug remove) */
extern int hvc_remove(struct hvc_struct *hp);
return sent;
}
-static struct hv_ops hvc_get_put_ops = {
+static const struct hv_ops hvc_get_put_ops = {
.get_chars = get_chars,
.put_chars = put_chars,
.notifier_add = notifier_add_irq,
/* HVC operations */
-static struct hv_ops hvc_iucv_ops = {
+static const struct hv_ops hvc_iucv_ops = {
.get_chars = hvc_iucv_get_chars,
.put_chars = hvc_iucv_put_chars,
.notifier_add = hvc_iucv_notifier_add,
return i;
}
-static struct hv_ops hvc_rtas_get_put_ops = {
+static const struct hv_ops hvc_rtas_get_put_ops = {
.get_chars = hvc_rtas_read_console,
.put_chars = hvc_rtas_write_console,
};
return i;
}
-static struct hv_ops hvc_udbg_ops = {
+static const struct hv_ops hvc_udbg_ops = {
.get_chars = hvc_udbg_get,
.put_chars = hvc_udbg_put,
};
return got;
}
-static struct hv_ops hvc_get_put_ops = {
+static const struct hv_ops hvc_get_put_ops = {
.get_chars = filtered_get_chars,
.put_chars = hvc_put_chars,
.notifier_add = notifier_add_irq,
return recv;
}
-static struct hv_ops hvc_ops = {
+static const struct hv_ops hvc_ops = {
.get_chars = read_console,
.put_chars = write_console,
.notifier_add = notifier_add_irq,
unsigned long p = *ppos;
ssize_t low_count, read, sz;
char * kbuf; /* k-addr because vread() takes vmlist_lock rwlock */
+ int err = 0;
read = 0;
if (p < (unsigned long) high_memory) {
return -ENOMEM;
while (count > 0) {
sz = size_inside_page(p, count);
+ if (!is_vmalloc_or_module_addr((void *)p)) {
+ err = -ENXIO;
+ break;
+ }
sz = vread(kbuf, (char *)p, sz);
if (!sz)
break;
if (copy_to_user(buf, kbuf, sz)) {
- free_page((unsigned long)kbuf);
- return -EFAULT;
+ err = -EFAULT;
+ break;
}
count -= sz;
buf += sz;
}
free_page((unsigned long)kbuf);
}
- *ppos = p;
- return read;
+ *ppos = p;
+ return read ? read : err;
}
ssize_t wrote = 0;
ssize_t virtr = 0;
char * kbuf; /* k-addr because vwrite() takes vmlist_lock rwlock */
+ int err = 0;
if (p < (unsigned long) high_memory) {
unsigned long to_write = min_t(unsigned long, count,
unsigned long sz = size_inside_page(p, count);
unsigned long n;
+ if (!is_vmalloc_or_module_addr((void *)p)) {
+ err = -ENXIO;
+ break;
+ }
n = copy_from_user(kbuf, buf, sz);
if (n) {
- if (wrote + virtr)
- break;
- free_page((unsigned long)kbuf);
- return -EFAULT;
+ err = -EFAULT;
+ break;
}
- sz = vwrite(kbuf, (char *)p, sz);
+ vwrite(kbuf, (char *)p, sz);
count -= sz;
buf += sz;
virtr += sz;
free_page((unsigned long)kbuf);
}
- *ppos = p;
- return virtr + wrote;
+ *ppos = p;
+ return virtr + wrote ? : err;
}
#endif
/* like a named pipe */
}
- /*
- * If we gave the user some bytes, update the access time.
- */
- if (count)
- file_accessed(file);
-
return (count ? count : retval);
}
size_t count, loff_t *ppos)
{
size_t ret;
- struct inode *inode = file->f_path.dentry->d_inode;
ret = write_pool(&blocking_pool, buffer, count);
if (ret)
if (ret)
return ret;
- inode->i_mtime = current_fs_time(inode->i_sb);
- mark_inode_dirty(inode);
return (ssize_t)count;
}
struct tpm_inf_dev {
int iotype;
- void __iomem *mem_base; /* MMIO ioremap'd addr */
- unsigned long map_base; /* phys MMIO base */
- unsigned long map_size; /* MMIO region size */
- unsigned int index_off; /* index register offset */
+ void __iomem *mem_base; /* MMIO ioremap'd addr */
+ unsigned long map_base; /* phys MMIO base */
+ unsigned long map_size; /* MMIO region size */
+ unsigned int index_off; /* index register offset */
- unsigned int data_regs; /* Data registers */
+ unsigned int data_regs; /* Data registers */
unsigned int data_size;
unsigned int config_port; /* IO Port config index reg */
.miscdev = {.fops = &inf_ops,},
};
-static const struct pnp_device_id tpm_pnp_tbl[] = {
+static const struct pnp_device_id tpm_inf_pnp_tbl[] = {
/* Infineon TPMs */
{"IFX0101", 0},
{"IFX0102", 0},
{"", 0}
};
-MODULE_DEVICE_TABLE(pnp, tpm_pnp_tbl);
+MODULE_DEVICE_TABLE(pnp, tpm_inf_pnp_tbl);
static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev,
const struct pnp_device_id *dev_id)
if (pnp_port_valid(dev, 0) && pnp_port_valid(dev, 1) &&
!(pnp_port_flags(dev, 0) & IORESOURCE_DISABLED)) {
- tpm_dev.iotype = TPM_INF_IO_PORT;
+ tpm_dev.iotype = TPM_INF_IO_PORT;
tpm_dev.config_port = pnp_port_start(dev, 0);
tpm_dev.config_size = pnp_port_len(dev, 0);
goto err_last;
}
} else if (pnp_mem_valid(dev, 0) &&
- !(pnp_mem_flags(dev, 0) & IORESOURCE_DISABLED)) {
+ !(pnp_mem_flags(dev, 0) & IORESOURCE_DISABLED)) {
- tpm_dev.iotype = TPM_INF_IO_MEM;
+ tpm_dev.iotype = TPM_INF_IO_MEM;
tpm_dev.map_base = pnp_mem_start(dev, 0);
tpm_dev.map_size = pnp_mem_len(dev, 0);
"product id 0x%02x%02x"
"%s\n",
tpm_dev.iotype == TPM_INF_IO_PORT ?
- tpm_dev.config_port :
- tpm_dev.map_base + tpm_dev.index_off,
+ tpm_dev.config_port :
+ tpm_dev.map_base + tpm_dev.index_off,
tpm_dev.iotype == TPM_INF_IO_PORT ?
- tpm_dev.data_regs :
- tpm_dev.map_base + tpm_dev.data_regs,
+ tpm_dev.data_regs :
+ tpm_dev.map_base + tpm_dev.data_regs,
version[0], version[1],
vendorid[0], vendorid[1],
productid[0], productid[1], chipname);
iounmap(tpm_dev.mem_base);
release_mem_region(tpm_dev.map_base, tpm_dev.map_size);
}
+ tpm_dev_vendor_release(chip);
tpm_remove_hardware(chip->dev);
}
}
+static int tpm_inf_pnp_suspend(struct pnp_dev *dev, pm_message_t pm_state)
+{
+ struct tpm_chip *chip = pnp_get_drvdata(dev);
+ int rc;
+ if (chip) {
+ u8 savestate[] = {
+ 0, 193, /* TPM_TAG_RQU_COMMAND */
+ 0, 0, 0, 10, /* blob length (in bytes) */
+ 0, 0, 0, 152 /* TPM_ORD_SaveState */
+ };
+ dev_info(&dev->dev, "saving TPM state\n");
+ rc = tpm_inf_send(chip, savestate, sizeof(savestate));
+ if (rc < 0) {
+ dev_err(&dev->dev, "error while saving TPM state\n");
+ return rc;
+ }
+ }
+ return 0;
+}
+
+static int tpm_inf_pnp_resume(struct pnp_dev *dev)
+{
+ /* Re-configure TPM after suspending */
+ tpm_config_out(ENABLE_REGISTER_PAIR, TPM_INF_ADDR);
+ tpm_config_out(IOLIMH, TPM_INF_ADDR);
+ tpm_config_out((tpm_dev.data_regs >> 8) & 0xff, TPM_INF_DATA);
+ tpm_config_out(IOLIML, TPM_INF_ADDR);
+ tpm_config_out((tpm_dev.data_regs & 0xff), TPM_INF_DATA);
+ /* activate register */
+ tpm_config_out(TPM_DAR, TPM_INF_ADDR);
+ tpm_config_out(0x01, TPM_INF_DATA);
+ tpm_config_out(DISABLE_REGISTER_PAIR, TPM_INF_ADDR);
+ /* disable RESET, LP and IRQC */
+ tpm_data_out(RESET_LP_IRQC_DISABLE, CMD);
+ return tpm_pm_resume(&dev->dev);
+}
+
static struct pnp_driver tpm_inf_pnp_driver = {
.name = "tpm_inf_pnp",
- .driver = {
- .owner = THIS_MODULE,
- .suspend = tpm_pm_suspend,
- .resume = tpm_pm_resume,
- },
- .id_table = tpm_pnp_tbl,
+ .id_table = tpm_inf_pnp_tbl,
.probe = tpm_inf_pnp_probe,
- .remove = __devexit_p(tpm_inf_pnp_remove),
+ .suspend = tpm_inf_pnp_suspend,
+ .resume = tpm_inf_pnp_resume,
+ .remove = __devexit_p(tpm_inf_pnp_remove)
};
static int __init init_inf(void)
MODULE_AUTHOR("Marcel Selhorst <m.selhorst@sirrix.com>");
MODULE_DESCRIPTION("Driver for Infineon TPM SLD 9630 TT 1.1 / SLB 9635 TT 1.2");
-MODULE_VERSION("1.9");
+MODULE_VERSION("1.9.2");
MODULE_LICENSE("GPL");
pid = task_pid(current);
type = PIDTYPE_PID;
}
- retval = __f_setown(filp, pid, type, 0);
+ get_pid(pid);
spin_unlock_irqrestore(&tty->ctrl_lock, flags);
+ retval = __f_setown(filp, pid, type, 0);
+ put_pid(pid);
if (retval)
goto out;
} else {
switch (cmd) {
case MMTIMER_GETOFFSET: /* offset of the counter */
/*
- * UV RTC register is on its own page
+ * Starting with HUB rev 2.0, the UV RTC register is
+ * replicated across all cachelines of it's own page.
+ * This allows faster simultaneous reads from a given socket.
+ *
+ * The offset returned is in 64 bit units.
*/
- if (PAGE_SIZE <= (1 << 16))
- ret = ((UV_LOCAL_MMR_BASE | UVH_RTC) & (PAGE_SIZE-1))
- / 8;
+ if (uv_get_min_hub_revision_id() == 1)
+ ret = 0;
else
- ret = -ENOSYS;
+ ret = ((uv_blade_processor_id() * L1_CACHE_BYTES) %
+ PAGE_SIZE) / 8;
break;
case MMTIMER_GETRES: /* resolution of the clock in 10^-15 s */
ret = hweight64(UVH_RTC_REAL_TIME_CLOCK_MASK);
break;
- case MMTIMER_MMAPAVAIL: /* can we mmap the clock into userspace? */
- ret = (PAGE_SIZE <= (1 << 16)) ? 1 : 0;
+ case MMTIMER_MMAPAVAIL:
+ ret = 1;
break;
case MMTIMER_GETCOUNTER:
-/*D:300
- * The Guest console driver
- *
- * Writing console drivers is one of the few remaining Dark Arts in Linux.
- * Fortunately for us, the path of virtual consoles has been well-trodden by
- * the PowerPC folks, who wrote "hvc_console.c" to generically support any
- * virtual console. We use that infrastructure which only requires us to write
- * the basic put_chars and get_chars functions and call the right register
- * functions.
- :*/
-
-/*M:002 The console can be flooded: while the Guest is processing input the
- * Host can send more. Buffering in the Host could alleviate this, but it is a
- * difficult problem in general. :*/
-/* Copyright (C) 2006, 2007 Rusty Russell, IBM Corporation
+/*
+ * Copyright (C) 2006, 2007, 2009 Rusty Russell, IBM Corporation
+ * Copyright (C) 2009, 2010 Red Hat, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/cdev.h>
+#include <linux/debugfs.h>
+#include <linux/device.h>
#include <linux/err.h>
+#include <linux/fs.h>
#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/poll.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
#include <linux/virtio.h>
#include <linux/virtio_console.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
#include "hvc_console.h"
-/*D:340 These represent our input and output console queues, and the virtio
- * operations for them. */
-static struct virtqueue *in_vq, *out_vq;
-static struct virtio_device *vdev;
+/*
+ * This is a global struct for storing common data for all the devices
+ * this driver handles.
+ *
+ * Mainly, it has a linked list for all the consoles in one place so
+ * that callbacks from hvc for get_chars(), put_chars() work properly
+ * across multiple devices and multiple ports per device.
+ */
+struct ports_driver_data {
+ /* Used for registering chardevs */
+ struct class *class;
+
+ /* Used for exporting per-port information to debugfs */
+ struct dentry *debugfs_dir;
+
+ /* Number of devices this driver is handling */
+ unsigned int index;
+
+ /*
+ * This is used to keep track of the number of hvc consoles
+ * spawned by this driver. This number is given as the first
+ * argument to hvc_alloc(). To correctly map an initial
+ * console spawned via hvc_instantiate to the console being
+ * hooked up via hvc_alloc, we need to pass the same vtermno.
+ *
+ * We also just assume the first console being initialised was
+ * the first one that got used as the initial console.
+ */
+ unsigned int next_vtermno;
+
+ /* All the console devices handled by this driver */
+ struct list_head consoles;
+};
+static struct ports_driver_data pdrvdata;
+
+DEFINE_SPINLOCK(pdrvdata_lock);
+
+/* This struct holds information that's relevant only for console ports */
+struct console {
+ /* We'll place all consoles in a list in the pdrvdata struct */
+ struct list_head list;
+
+ /* The hvc device associated with this console port */
+ struct hvc_struct *hvc;
+
+ /*
+ * This number identifies the number that we used to register
+ * with hvc in hvc_instantiate() and hvc_alloc(); this is the
+ * number passed on by the hvc callbacks to us to
+ * differentiate between the other console ports handled by
+ * this driver
+ */
+ u32 vtermno;
+};
+
+struct port_buffer {
+ char *buf;
+
+ /* size of the buffer in *buf above */
+ size_t size;
+
+ /* used length of the buffer */
+ size_t len;
+ /* offset in the buf from which to consume data */
+ size_t offset;
+};
+
+/*
+ * This is a per-device struct that stores data common to all the
+ * ports for that device (vdev->priv).
+ */
+struct ports_device {
+ /*
+ * Workqueue handlers where we process deferred work after
+ * notification
+ */
+ struct work_struct control_work;
+ struct work_struct config_work;
+
+ struct list_head ports;
+
+ /* To protect the list of ports */
+ spinlock_t ports_lock;
+
+ /* To protect the vq operations for the control channel */
+ spinlock_t cvq_lock;
+
+ /* The current config space is stored here */
+ struct virtio_console_config config;
+
+ /* The virtio device we're associated with */
+ struct virtio_device *vdev;
+
+ /*
+ * A couple of virtqueues for the control channel: one for
+ * guest->host transfers, one for host->guest transfers
+ */
+ struct virtqueue *c_ivq, *c_ovq;
+
+ /* Array of per-port IO virtqueues */
+ struct virtqueue **in_vqs, **out_vqs;
+
+ /* Used for numbering devices for sysfs and debugfs */
+ unsigned int drv_index;
+
+ /* Major number for this device. Ports will be created as minors. */
+ int chr_major;
+};
+
+/* This struct holds the per-port data */
+struct port {
+ /* Next port in the list, head is in the ports_device */
+ struct list_head list;
+
+ /* Pointer to the parent virtio_console device */
+ struct ports_device *portdev;
+
+ /* The current buffer from which data has to be fed to readers */
+ struct port_buffer *inbuf;
+
+ /*
+ * To protect the operations on the in_vq associated with this
+ * port. Has to be a spinlock because it can be called from
+ * interrupt context (get_char()).
+ */
+ spinlock_t inbuf_lock;
+
+ /* The IO vqs for this port */
+ struct virtqueue *in_vq, *out_vq;
+
+ /* File in the debugfs directory that exposes this port's information */
+ struct dentry *debugfs_file;
+
+ /*
+ * The entries in this struct will be valid if this port is
+ * hooked up to an hvc console
+ */
+ struct console cons;
+
+ /* Each port associates with a separate char device */
+ struct cdev cdev;
+ struct device *dev;
+
+ /* A waitqueue for poll() or blocking read operations */
+ wait_queue_head_t waitqueue;
+
+ /* The 'name' of the port that we expose via sysfs properties */
+ char *name;
+
+ /* The 'id' to identify the port with the Host */
+ u32 id;
+
+ /* Is the host device open */
+ bool host_connected;
+
+ /* We should allow only one process to open a port */
+ bool guest_connected;
+};
+
+/* This is the very early arch-specified put chars function. */
+static int (*early_put_chars)(u32, const char *, int);
+
+static struct port *find_port_by_vtermno(u32 vtermno)
+{
+ struct port *port;
+ struct console *cons;
+ unsigned long flags;
+
+ spin_lock_irqsave(&pdrvdata_lock, flags);
+ list_for_each_entry(cons, &pdrvdata.consoles, list) {
+ if (cons->vtermno == vtermno) {
+ port = container_of(cons, struct port, cons);
+ goto out;
+ }
+ }
+ port = NULL;
+out:
+ spin_unlock_irqrestore(&pdrvdata_lock, flags);
+ return port;
+}
+
+static struct port *find_port_by_id(struct ports_device *portdev, u32 id)
+{
+ struct port *port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&portdev->ports_lock, flags);
+ list_for_each_entry(port, &portdev->ports, list)
+ if (port->id == id)
+ goto out;
+ port = NULL;
+out:
+ spin_unlock_irqrestore(&portdev->ports_lock, flags);
+
+ return port;
+}
+
+static struct port *find_port_by_vq(struct ports_device *portdev,
+ struct virtqueue *vq)
+{
+ struct port *port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&portdev->ports_lock, flags);
+ list_for_each_entry(port, &portdev->ports, list)
+ if (port->in_vq == vq || port->out_vq == vq)
+ goto out;
+ port = NULL;
+out:
+ spin_unlock_irqrestore(&portdev->ports_lock, flags);
+ return port;
+}
+
+static bool is_console_port(struct port *port)
+{
+ if (port->cons.hvc)
+ return true;
+ return false;
+}
+
+static inline bool use_multiport(struct ports_device *portdev)
+{
+ /*
+ * This condition can be true when put_chars is called from
+ * early_init
+ */
+ if (!portdev->vdev)
+ return 0;
+ return portdev->vdev->features[0] & (1 << VIRTIO_CONSOLE_F_MULTIPORT);
+}
-/* This is our input buffer, and how much data is left in it. */
-static unsigned int in_len;
-static char *in, *inbuf;
+static void free_buf(struct port_buffer *buf)
+{
+ kfree(buf->buf);
+ kfree(buf);
+}
+
+static struct port_buffer *alloc_buf(size_t buf_size)
+{
+ struct port_buffer *buf;
-/* The operations for our console. */
-static struct hv_ops virtio_cons;
+ buf = kmalloc(sizeof(*buf), GFP_KERNEL);
+ if (!buf)
+ goto fail;
+ buf->buf = kzalloc(buf_size, GFP_KERNEL);
+ if (!buf->buf)
+ goto free_buf;
+ buf->len = 0;
+ buf->offset = 0;
+ buf->size = buf_size;
+ return buf;
+
+free_buf:
+ kfree(buf);
+fail:
+ return NULL;
+}
+
+/* Callers should take appropriate locks */
+static void *get_inbuf(struct port *port)
+{
+ struct port_buffer *buf;
+ struct virtqueue *vq;
+ unsigned int len;
-/* The hvc device */
-static struct hvc_struct *hvc;
+ vq = port->in_vq;
+ buf = vq->vq_ops->get_buf(vq, &len);
+ if (buf) {
+ buf->len = len;
+ buf->offset = 0;
+ }
+ return buf;
+}
-/*D:310 The put_chars() callback is pretty straightforward.
+/*
+ * Create a scatter-gather list representing our input buffer and put
+ * it in the queue.
*
- * We turn the characters into a scatter-gather list, add it to the output
- * queue and then kick the Host. Then we sit here waiting for it to finish:
- * inefficient in theory, but in practice implementations will do it
- * immediately (lguest's Launcher does). */
-static int put_chars(u32 vtermno, const char *buf, int count)
+ * Callers should take appropriate locks.
+ */
+static int add_inbuf(struct virtqueue *vq, struct port_buffer *buf)
{
struct scatterlist sg[1];
+ int ret;
+
+ sg_init_one(sg, buf->buf, buf->size);
+
+ ret = vq->vq_ops->add_buf(vq, sg, 0, 1, buf);
+ vq->vq_ops->kick(vq);
+ return ret;
+}
+
+/* Discard any unread data this port has. Callers lockers. */
+static void discard_port_data(struct port *port)
+{
+ struct port_buffer *buf;
+ struct virtqueue *vq;
unsigned int len;
+ int ret;
- /* This is a convenient routine to initialize a single-elem sg list */
- sg_init_one(sg, buf, count);
+ vq = port->in_vq;
+ if (port->inbuf)
+ buf = port->inbuf;
+ else
+ buf = vq->vq_ops->get_buf(vq, &len);
- /* add_buf wants a token to identify this buffer: we hand it any
- * non-NULL pointer, since there's only ever one buffer. */
- if (out_vq->vq_ops->add_buf(out_vq, sg, 1, 0, (void *)1) >= 0) {
- /* Tell Host to go! */
- out_vq->vq_ops->kick(out_vq);
- /* Chill out until it's done with the buffer. */
- while (!out_vq->vq_ops->get_buf(out_vq, &len))
- cpu_relax();
+ ret = 0;
+ while (buf) {
+ if (add_inbuf(vq, buf) < 0) {
+ ret++;
+ free_buf(buf);
+ }
+ buf = vq->vq_ops->get_buf(vq, &len);
}
+ port->inbuf = NULL;
+ if (ret)
+ dev_warn(port->dev, "Errors adding %d buffers back to vq\n",
+ ret);
+}
- /* We're expected to return the amount of data we wrote: all of it. */
- return count;
+static bool port_has_data(struct port *port)
+{
+ unsigned long flags;
+ bool ret;
+
+ spin_lock_irqsave(&port->inbuf_lock, flags);
+ if (port->inbuf) {
+ ret = true;
+ goto out;
+ }
+ port->inbuf = get_inbuf(port);
+ if (port->inbuf) {
+ ret = true;
+ goto out;
+ }
+ ret = false;
+out:
+ spin_unlock_irqrestore(&port->inbuf_lock, flags);
+ return ret;
}
-/* Create a scatter-gather list representing our input buffer and put it in the
- * queue. */
-static void add_inbuf(void)
+static ssize_t send_control_msg(struct port *port, unsigned int event,
+ unsigned int value)
{
struct scatterlist sg[1];
- sg_init_one(sg, inbuf, PAGE_SIZE);
+ struct virtio_console_control cpkt;
+ struct virtqueue *vq;
+ int len;
+
+ if (!use_multiport(port->portdev))
+ return 0;
+
+ cpkt.id = port->id;
+ cpkt.event = event;
+ cpkt.value = value;
+
+ vq = port->portdev->c_ovq;
- /* We should always be able to add one buffer to an empty queue. */
- if (in_vq->vq_ops->add_buf(in_vq, sg, 0, 1, inbuf) < 0)
- BUG();
- in_vq->vq_ops->kick(in_vq);
+ sg_init_one(sg, &cpkt, sizeof(cpkt));
+ if (vq->vq_ops->add_buf(vq, sg, 1, 0, &cpkt) >= 0) {
+ vq->vq_ops->kick(vq);
+ while (!vq->vq_ops->get_buf(vq, &len))
+ cpu_relax();
+ }
+ return 0;
}
-/*D:350 get_chars() is the callback from the hvc_console infrastructure when
- * an interrupt is received.
- *
- * Most of the code deals with the fact that the hvc_console() infrastructure
- * only asks us for 16 bytes at a time. We keep in_offset and in_used fields
- * for partially-filled buffers. */
-static int get_chars(u32 vtermno, char *buf, int count)
+static ssize_t send_buf(struct port *port, void *in_buf, size_t in_count)
{
- /* If we don't have an input queue yet, we can't get input. */
- BUG_ON(!in_vq);
+ struct scatterlist sg[1];
+ struct virtqueue *out_vq;
+ ssize_t ret;
+ unsigned int len;
+
+ out_vq = port->out_vq;
+
+ sg_init_one(sg, in_buf, in_count);
+ ret = out_vq->vq_ops->add_buf(out_vq, sg, 1, 0, in_buf);
+
+ /* Tell Host to go! */
+ out_vq->vq_ops->kick(out_vq);
+
+ if (ret < 0) {
+ len = 0;
+ goto fail;
+ }
+
+ /*
+ * Wait till the host acknowledges it pushed out the data we
+ * sent. Also ensure we return to userspace the number of
+ * bytes that were successfully consumed by the host.
+ */
+ while (!out_vq->vq_ops->get_buf(out_vq, &len))
+ cpu_relax();
+fail:
+ /* We're expected to return the amount of data we wrote */
+ return len;
+}
+
+/*
+ * Give out the data that's requested from the buffer that we have
+ * queued up.
+ */
+static ssize_t fill_readbuf(struct port *port, char *out_buf, size_t out_count,
+ bool to_user)
+{
+ struct port_buffer *buf;
+ unsigned long flags;
+
+ if (!out_count || !port_has_data(port))
+ return 0;
+
+ buf = port->inbuf;
+ out_count = min(out_count, buf->len - buf->offset);
+
+ if (to_user) {
+ ssize_t ret;
+
+ ret = copy_to_user(out_buf, buf->buf + buf->offset, out_count);
+ if (ret)
+ return -EFAULT;
+ } else {
+ memcpy(out_buf, buf->buf + buf->offset, out_count);
+ }
+
+ buf->offset += out_count;
+
+ if (buf->offset == buf->len) {
+ /*
+ * We're done using all the data in this buffer.
+ * Re-queue so that the Host can send us more data.
+ */
+ spin_lock_irqsave(&port->inbuf_lock, flags);
+ port->inbuf = NULL;
+
+ if (add_inbuf(port->in_vq, buf) < 0)
+ dev_warn(port->dev, "failed add_buf\n");
+
+ spin_unlock_irqrestore(&port->inbuf_lock, flags);
+ }
+ /* Return the number of bytes actually copied */
+ return out_count;
+}
- /* No buffer? Try to get one. */
- if (!in_len) {
- in = in_vq->vq_ops->get_buf(in_vq, &in_len);
- if (!in)
+/* The condition that must be true for polling to end */
+static bool wait_is_over(struct port *port)
+{
+ return port_has_data(port) || !port->host_connected;
+}
+
+static ssize_t port_fops_read(struct file *filp, char __user *ubuf,
+ size_t count, loff_t *offp)
+{
+ struct port *port;
+ ssize_t ret;
+
+ port = filp->private_data;
+
+ if (!port_has_data(port)) {
+ /*
+ * If nothing's connected on the host just return 0 in
+ * case of list_empty; this tells the userspace app
+ * that there's no connection
+ */
+ if (!port->host_connected)
return 0;
+ if (filp->f_flags & O_NONBLOCK)
+ return -EAGAIN;
+
+ ret = wait_event_interruptible(port->waitqueue,
+ wait_is_over(port));
+ if (ret < 0)
+ return ret;
+ }
+ /*
+ * We could've received a disconnection message while we were
+ * waiting for more data.
+ *
+ * This check is not clubbed in the if() statement above as we
+ * might receive some data as well as the host could get
+ * disconnected after we got woken up from our wait. So we
+ * really want to give off whatever data we have and only then
+ * check for host_connected.
+ */
+ if (!port_has_data(port) && !port->host_connected)
+ return 0;
+
+ return fill_readbuf(port, ubuf, count, true);
+}
+
+static ssize_t port_fops_write(struct file *filp, const char __user *ubuf,
+ size_t count, loff_t *offp)
+{
+ struct port *port;
+ char *buf;
+ ssize_t ret;
+
+ port = filp->private_data;
+
+ count = min((size_t)(32 * 1024), count);
+
+ buf = kmalloc(count, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ ret = copy_from_user(buf, ubuf, count);
+ if (ret) {
+ ret = -EFAULT;
+ goto free_buf;
}
- /* You want more than we have to give? Well, try wanting less! */
- if (in_len < count)
- count = in_len;
+ ret = send_buf(port, buf, count);
+free_buf:
+ kfree(buf);
+ return ret;
+}
+
+static unsigned int port_fops_poll(struct file *filp, poll_table *wait)
+{
+ struct port *port;
+ unsigned int ret;
+
+ port = filp->private_data;
+ poll_wait(filp, &port->waitqueue, wait);
+
+ ret = 0;
+ if (port->inbuf)
+ ret |= POLLIN | POLLRDNORM;
+ if (port->host_connected)
+ ret |= POLLOUT;
+ if (!port->host_connected)
+ ret |= POLLHUP;
+
+ return ret;
+}
+
+static int port_fops_release(struct inode *inode, struct file *filp)
+{
+ struct port *port;
+
+ port = filp->private_data;
+
+ /* Notify host of port being closed */
+ send_control_msg(port, VIRTIO_CONSOLE_PORT_OPEN, 0);
+
+ spin_lock_irq(&port->inbuf_lock);
+ port->guest_connected = false;
+
+ discard_port_data(port);
+
+ spin_unlock_irq(&port->inbuf_lock);
+
+ return 0;
+}
+
+static int port_fops_open(struct inode *inode, struct file *filp)
+{
+ struct cdev *cdev = inode->i_cdev;
+ struct port *port;
+
+ port = container_of(cdev, struct port, cdev);
+ filp->private_data = port;
+
+ /*
+ * Don't allow opening of console port devices -- that's done
+ * via /dev/hvc
+ */
+ if (is_console_port(port))
+ return -ENXIO;
+
+ /* Allow only one process to open a particular port at a time */
+ spin_lock_irq(&port->inbuf_lock);
+ if (port->guest_connected) {
+ spin_unlock_irq(&port->inbuf_lock);
+ return -EMFILE;
+ }
- /* Copy across to their buffer and increment offset. */
- memcpy(buf, in, count);
- in += count;
- in_len -= count;
+ port->guest_connected = true;
+ spin_unlock_irq(&port->inbuf_lock);
- /* Finished? Re-register buffer so Host will use it again. */
- if (in_len == 0)
- add_inbuf();
+ /* Notify host of port being opened */
+ send_control_msg(filp->private_data, VIRTIO_CONSOLE_PORT_OPEN, 1);
- return count;
+ return 0;
}
-/*:*/
-/*D:320 Console drivers are initialized very early so boot messages can go out,
- * so we do things slightly differently from the generic virtio initialization
- * of the net and block drivers.
+/*
+ * The file operations that we support: programs in the guest can open
+ * a console device, read from it, write to it, poll for data and
+ * close it. The devices are at
+ * /dev/vport<device number>p<port number>
+ */
+static const struct file_operations port_fops = {
+ .owner = THIS_MODULE,
+ .open = port_fops_open,
+ .read = port_fops_read,
+ .write = port_fops_write,
+ .poll = port_fops_poll,
+ .release = port_fops_release,
+};
+
+/*
+ * The put_chars() callback is pretty straightforward.
*
- * At this stage, the console is output-only. It's too early to set up a
- * virtqueue, so we let the drivers do some boutique early-output thing. */
-int __init virtio_cons_early_init(int (*put_chars)(u32, const char *, int))
+ * We turn the characters into a scatter-gather list, add it to the
+ * output queue and then kick the Host. Then we sit here waiting for
+ * it to finish: inefficient in theory, but in practice
+ * implementations will do it immediately (lguest's Launcher does).
+ */
+static int put_chars(u32 vtermno, const char *buf, int count)
{
- virtio_cons.put_chars = put_chars;
- return hvc_instantiate(0, 0, &virtio_cons);
+ struct port *port;
+
+ port = find_port_by_vtermno(vtermno);
+ if (!port)
+ return 0;
+
+ if (unlikely(early_put_chars))
+ return early_put_chars(vtermno, buf, count);
+
+ return send_buf(port, (void *)buf, count);
}
/*
- * virtio console configuration. This supports:
- * - console resize
+ * get_chars() is the callback from the hvc_console infrastructure
+ * when an interrupt is received.
+ *
+ * We call out to fill_readbuf that gets us the required data from the
+ * buffers that are queued up.
*/
-static void virtcons_apply_config(struct virtio_device *dev)
+static int get_chars(u32 vtermno, char *buf, int count)
{
+ struct port *port;
+
+ port = find_port_by_vtermno(vtermno);
+ if (!port)
+ return 0;
+
+ /* If we don't have an input queue yet, we can't get input. */
+ BUG_ON(!port->in_vq);
+
+ return fill_readbuf(port, buf, count, false);
+}
+
+static void resize_console(struct port *port)
+{
+ struct virtio_device *vdev;
struct winsize ws;
- if (virtio_has_feature(dev, VIRTIO_CONSOLE_F_SIZE)) {
- dev->config->get(dev,
- offsetof(struct virtio_console_config, cols),
- &ws.ws_col, sizeof(u16));
- dev->config->get(dev,
- offsetof(struct virtio_console_config, rows),
- &ws.ws_row, sizeof(u16));
- hvc_resize(hvc, ws);
+ vdev = port->portdev->vdev;
+ if (virtio_has_feature(vdev, VIRTIO_CONSOLE_F_SIZE)) {
+ vdev->config->get(vdev,
+ offsetof(struct virtio_console_config, cols),
+ &ws.ws_col, sizeof(u16));
+ vdev->config->get(vdev,
+ offsetof(struct virtio_console_config, rows),
+ &ws.ws_row, sizeof(u16));
+ hvc_resize(port->cons.hvc, ws);
}
}
-/*
- * we support only one console, the hvc struct is a global var
- * We set the configuration at this point, since we now have a tty
- */
+/* We set the configuration at this point, since we now have a tty */
static int notifier_add_vio(struct hvc_struct *hp, int data)
{
+ struct port *port;
+
+ port = find_port_by_vtermno(hp->vtermno);
+ if (!port)
+ return -EINVAL;
+
hp->irq_requested = 1;
- virtcons_apply_config(vdev);
+ resize_console(port);
return 0;
}
hp->irq_requested = 0;
}
-static void hvc_handle_input(struct virtqueue *vq)
+/* The operations for console ports. */
+static const struct hv_ops hv_ops = {
+ .get_chars = get_chars,
+ .put_chars = put_chars,
+ .notifier_add = notifier_add_vio,
+ .notifier_del = notifier_del_vio,
+ .notifier_hangup = notifier_del_vio,
+};
+
+/*
+ * Console drivers are initialized very early so boot messages can go
+ * out, so we do things slightly differently from the generic virtio
+ * initialization of the net and block drivers.
+ *
+ * At this stage, the console is output-only. It's too early to set
+ * up a virtqueue, so we let the drivers do some boutique early-output
+ * thing.
+ */
+int __init virtio_cons_early_init(int (*put_chars)(u32, const char *, int))
{
- if (hvc_poll(hvc))
+ early_put_chars = put_chars;
+ return hvc_instantiate(0, 0, &hv_ops);
+}
+
+int init_port_console(struct port *port)
+{
+ int ret;
+
+ /*
+ * The Host's telling us this port is a console port. Hook it
+ * up with an hvc console.
+ *
+ * To set up and manage our virtual console, we call
+ * hvc_alloc().
+ *
+ * The first argument of hvc_alloc() is the virtual console
+ * number. The second argument is the parameter for the
+ * notification mechanism (like irq number). We currently
+ * leave this as zero, virtqueues have implicit notifications.
+ *
+ * The third argument is a "struct hv_ops" containing the
+ * put_chars() get_chars(), notifier_add() and notifier_del()
+ * pointers. The final argument is the output buffer size: we
+ * can do any size, so we put PAGE_SIZE here.
+ */
+ port->cons.vtermno = pdrvdata.next_vtermno;
+
+ port->cons.hvc = hvc_alloc(port->cons.vtermno, 0, &hv_ops, PAGE_SIZE);
+ if (IS_ERR(port->cons.hvc)) {
+ ret = PTR_ERR(port->cons.hvc);
+ dev_err(port->dev,
+ "error %d allocating hvc for port\n", ret);
+ port->cons.hvc = NULL;
+ return ret;
+ }
+ spin_lock_irq(&pdrvdata_lock);
+ pdrvdata.next_vtermno++;
+ list_add_tail(&port->cons.list, &pdrvdata.consoles);
+ spin_unlock_irq(&pdrvdata_lock);
+ port->guest_connected = true;
+
+ /* Notify host of port being opened */
+ send_control_msg(port, VIRTIO_CONSOLE_PORT_OPEN, 1);
+
+ return 0;
+}
+
+static ssize_t show_port_name(struct device *dev,
+ struct device_attribute *attr, char *buffer)
+{
+ struct port *port;
+
+ port = dev_get_drvdata(dev);
+
+ return sprintf(buffer, "%s\n", port->name);
+}
+
+static DEVICE_ATTR(name, S_IRUGO, show_port_name, NULL);
+
+static struct attribute *port_sysfs_entries[] = {
+ &dev_attr_name.attr,
+ NULL
+};
+
+static struct attribute_group port_attribute_group = {
+ .name = NULL, /* put in device directory */
+ .attrs = port_sysfs_entries,
+};
+
+static int debugfs_open(struct inode *inode, struct file *filp)
+{
+ filp->private_data = inode->i_private;
+ return 0;
+}
+
+static ssize_t debugfs_read(struct file *filp, char __user *ubuf,
+ size_t count, loff_t *offp)
+{
+ struct port *port;
+ char *buf;
+ ssize_t ret, out_offset, out_count;
+
+ out_count = 1024;
+ buf = kmalloc(out_count, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ port = filp->private_data;
+ out_offset = 0;
+ out_offset += snprintf(buf + out_offset, out_count,
+ "name: %s\n", port->name ? port->name : "");
+ out_offset += snprintf(buf + out_offset, out_count - out_offset,
+ "guest_connected: %d\n", port->guest_connected);
+ out_offset += snprintf(buf + out_offset, out_count - out_offset,
+ "host_connected: %d\n", port->host_connected);
+ out_offset += snprintf(buf + out_offset, out_count - out_offset,
+ "is_console: %s\n",
+ is_console_port(port) ? "yes" : "no");
+ out_offset += snprintf(buf + out_offset, out_count - out_offset,
+ "console_vtermno: %u\n", port->cons.vtermno);
+
+ ret = simple_read_from_buffer(ubuf, count, offp, buf, out_offset);
+ kfree(buf);
+ return ret;
+}
+
+static const struct file_operations port_debugfs_ops = {
+ .owner = THIS_MODULE,
+ .open = debugfs_open,
+ .read = debugfs_read,
+};
+
+/* Remove all port-specific data. */
+static int remove_port(struct port *port)
+{
+ struct port_buffer *buf;
+
+ spin_lock_irq(&port->portdev->ports_lock);
+ list_del(&port->list);
+ spin_unlock_irq(&port->portdev->ports_lock);
+
+ if (is_console_port(port)) {
+ spin_lock_irq(&pdrvdata_lock);
+ list_del(&port->cons.list);
+ spin_unlock_irq(&pdrvdata_lock);
+ hvc_remove(port->cons.hvc);
+ }
+ if (port->guest_connected)
+ send_control_msg(port, VIRTIO_CONSOLE_PORT_OPEN, 0);
+
+ sysfs_remove_group(&port->dev->kobj, &port_attribute_group);
+ device_destroy(pdrvdata.class, port->dev->devt);
+ cdev_del(&port->cdev);
+
+ /* Remove unused data this port might have received. */
+ discard_port_data(port);
+
+ /* Remove buffers we queued up for the Host to send us data in. */
+ while ((buf = port->in_vq->vq_ops->detach_unused_buf(port->in_vq)))
+ free_buf(buf);
+
+ kfree(port->name);
+
+ debugfs_remove(port->debugfs_file);
+
+ kfree(port);
+ return 0;
+}
+
+/* Any private messages that the Host and Guest want to share */
+static void handle_control_message(struct ports_device *portdev,
+ struct port_buffer *buf)
+{
+ struct virtio_console_control *cpkt;
+ struct port *port;
+ size_t name_size;
+ int err;
+
+ cpkt = (struct virtio_console_control *)(buf->buf + buf->offset);
+
+ port = find_port_by_id(portdev, cpkt->id);
+ if (!port) {
+ /* No valid header at start of buffer. Drop it. */
+ dev_dbg(&portdev->vdev->dev,
+ "Invalid index %u in control packet\n", cpkt->id);
+ return;
+ }
+
+ switch (cpkt->event) {
+ case VIRTIO_CONSOLE_CONSOLE_PORT:
+ if (!cpkt->value)
+ break;
+ if (is_console_port(port))
+ break;
+
+ init_port_console(port);
+ /*
+ * Could remove the port here in case init fails - but
+ * have to notify the host first.
+ */
+ break;
+ case VIRTIO_CONSOLE_RESIZE:
+ if (!is_console_port(port))
+ break;
+ port->cons.hvc->irq_requested = 1;
+ resize_console(port);
+ break;
+ case VIRTIO_CONSOLE_PORT_OPEN:
+ port->host_connected = cpkt->value;
+ wake_up_interruptible(&port->waitqueue);
+ break;
+ case VIRTIO_CONSOLE_PORT_NAME:
+ /*
+ * Skip the size of the header and the cpkt to get the size
+ * of the name that was sent
+ */
+ name_size = buf->len - buf->offset - sizeof(*cpkt) + 1;
+
+ port->name = kmalloc(name_size, GFP_KERNEL);
+ if (!port->name) {
+ dev_err(port->dev,
+ "Not enough space to store port name\n");
+ break;
+ }
+ strncpy(port->name, buf->buf + buf->offset + sizeof(*cpkt),
+ name_size - 1);
+ port->name[name_size - 1] = 0;
+
+ /*
+ * Since we only have one sysfs attribute, 'name',
+ * create it only if we have a name for the port.
+ */
+ err = sysfs_create_group(&port->dev->kobj,
+ &port_attribute_group);
+ if (err)
+ dev_err(port->dev,
+ "Error %d creating sysfs device attributes\n",
+ err);
+
+ break;
+ case VIRTIO_CONSOLE_PORT_REMOVE:
+ /*
+ * Hot unplug the port. We don't decrement nr_ports
+ * since we don't want to deal with extra complexities
+ * of using the lowest-available port id: We can just
+ * pick up the nr_ports number as the id and not have
+ * userspace send it to us. This helps us in two
+ * ways:
+ *
+ * - We don't need to have a 'port_id' field in the
+ * config space when a port is hot-added. This is a
+ * good thing as we might queue up multiple hotplug
+ * requests issued in our workqueue.
+ *
+ * - Another way to deal with this would have been to
+ * use a bitmap of the active ports and select the
+ * lowest non-active port from that map. That
+ * bloats the already tight config space and we
+ * would end up artificially limiting the
+ * max. number of ports to sizeof(bitmap). Right
+ * now we can support 2^32 ports (as the port id is
+ * stored in a u32 type).
+ *
+ */
+ remove_port(port);
+ break;
+ }
+}
+
+static void control_work_handler(struct work_struct *work)
+{
+ struct ports_device *portdev;
+ struct virtqueue *vq;
+ struct port_buffer *buf;
+ unsigned int len;
+
+ portdev = container_of(work, struct ports_device, control_work);
+ vq = portdev->c_ivq;
+
+ spin_lock(&portdev->cvq_lock);
+ while ((buf = vq->vq_ops->get_buf(vq, &len))) {
+ spin_unlock(&portdev->cvq_lock);
+
+ buf->len = len;
+ buf->offset = 0;
+
+ handle_control_message(portdev, buf);
+
+ spin_lock(&portdev->cvq_lock);
+ if (add_inbuf(portdev->c_ivq, buf) < 0) {
+ dev_warn(&portdev->vdev->dev,
+ "Error adding buffer to queue\n");
+ free_buf(buf);
+ }
+ }
+ spin_unlock(&portdev->cvq_lock);
+}
+
+static void in_intr(struct virtqueue *vq)
+{
+ struct port *port;
+ unsigned long flags;
+
+ port = find_port_by_vq(vq->vdev->priv, vq);
+ if (!port)
+ return;
+
+ spin_lock_irqsave(&port->inbuf_lock, flags);
+ if (!port->inbuf)
+ port->inbuf = get_inbuf(port);
+
+ /*
+ * Don't queue up data when port is closed. This condition
+ * can be reached when a console port is not yet connected (no
+ * tty is spawned) and the host sends out data to console
+ * ports. For generic serial ports, the host won't
+ * (shouldn't) send data till the guest is connected.
+ */
+ if (!port->guest_connected)
+ discard_port_data(port);
+
+ spin_unlock_irqrestore(&port->inbuf_lock, flags);
+
+ wake_up_interruptible(&port->waitqueue);
+
+ if (is_console_port(port) && hvc_poll(port->cons.hvc))
hvc_kick();
}
-/*D:370 Once we're further in boot, we get probed like any other virtio device.
- * At this stage we set up the output virtqueue.
- *
- * To set up and manage our virtual console, we call hvc_alloc(). Since we
- * never remove the console device we never need this pointer again.
+static void control_intr(struct virtqueue *vq)
+{
+ struct ports_device *portdev;
+
+ portdev = vq->vdev->priv;
+ schedule_work(&portdev->control_work);
+}
+
+static void config_intr(struct virtio_device *vdev)
+{
+ struct ports_device *portdev;
+
+ portdev = vdev->priv;
+ if (use_multiport(portdev)) {
+ /* Handle port hot-add */
+ schedule_work(&portdev->config_work);
+ }
+ /*
+ * We'll use this way of resizing only for legacy support.
+ * For newer userspace (VIRTIO_CONSOLE_F_MULTPORT+), use
+ * control messages to indicate console size changes so that
+ * it can be done per-port
+ */
+ resize_console(find_port_by_id(portdev, 0));
+}
+
+static unsigned int fill_queue(struct virtqueue *vq, spinlock_t *lock)
+{
+ struct port_buffer *buf;
+ unsigned int ret;
+ int err;
+
+ ret = 0;
+ do {
+ buf = alloc_buf(PAGE_SIZE);
+ if (!buf)
+ break;
+
+ spin_lock_irq(lock);
+ err = add_inbuf(vq, buf);
+ if (err < 0) {
+ spin_unlock_irq(lock);
+ free_buf(buf);
+ break;
+ }
+ ret++;
+ spin_unlock_irq(lock);
+ } while (err > 0);
+
+ return ret;
+}
+
+static int add_port(struct ports_device *portdev, u32 id)
+{
+ char debugfs_name[16];
+ struct port *port;
+ struct port_buffer *buf;
+ dev_t devt;
+ int err;
+
+ port = kmalloc(sizeof(*port), GFP_KERNEL);
+ if (!port) {
+ err = -ENOMEM;
+ goto fail;
+ }
+
+ port->portdev = portdev;
+ port->id = id;
+
+ port->name = NULL;
+ port->inbuf = NULL;
+ port->cons.hvc = NULL;
+
+ port->host_connected = port->guest_connected = false;
+
+ port->in_vq = portdev->in_vqs[port->id];
+ port->out_vq = portdev->out_vqs[port->id];
+
+ cdev_init(&port->cdev, &port_fops);
+
+ devt = MKDEV(portdev->chr_major, id);
+ err = cdev_add(&port->cdev, devt, 1);
+ if (err < 0) {
+ dev_err(&port->portdev->vdev->dev,
+ "Error %d adding cdev for port %u\n", err, id);
+ goto free_port;
+ }
+ port->dev = device_create(pdrvdata.class, &port->portdev->vdev->dev,
+ devt, port, "vport%up%u",
+ port->portdev->drv_index, id);
+ if (IS_ERR(port->dev)) {
+ err = PTR_ERR(port->dev);
+ dev_err(&port->portdev->vdev->dev,
+ "Error %d creating device for port %u\n",
+ err, id);
+ goto free_cdev;
+ }
+
+ spin_lock_init(&port->inbuf_lock);
+ init_waitqueue_head(&port->waitqueue);
+
+ /* Fill the in_vq with buffers so the host can send us data. */
+ err = fill_queue(port->in_vq, &port->inbuf_lock);
+ if (!err) {
+ dev_err(port->dev, "Error allocating inbufs\n");
+ err = -ENOMEM;
+ goto free_device;
+ }
+
+ /*
+ * If we're not using multiport support, this has to be a console port
+ */
+ if (!use_multiport(port->portdev)) {
+ err = init_port_console(port);
+ if (err)
+ goto free_inbufs;
+ }
+
+ spin_lock_irq(&portdev->ports_lock);
+ list_add_tail(&port->list, &port->portdev->ports);
+ spin_unlock_irq(&portdev->ports_lock);
+
+ /*
+ * Tell the Host we're set so that it can send us various
+ * configuration parameters for this port (eg, port name,
+ * caching, whether this is a console port, etc.)
+ */
+ send_control_msg(port, VIRTIO_CONSOLE_PORT_READY, 1);
+
+ if (pdrvdata.debugfs_dir) {
+ /*
+ * Finally, create the debugfs file that we can use to
+ * inspect a port's state at any time
+ */
+ sprintf(debugfs_name, "vport%up%u",
+ port->portdev->drv_index, id);
+ port->debugfs_file = debugfs_create_file(debugfs_name, 0444,
+ pdrvdata.debugfs_dir,
+ port,
+ &port_debugfs_ops);
+ }
+ return 0;
+
+free_inbufs:
+ while ((buf = port->in_vq->vq_ops->detach_unused_buf(port->in_vq)))
+ free_buf(buf);
+free_device:
+ device_destroy(pdrvdata.class, port->dev->devt);
+free_cdev:
+ cdev_del(&port->cdev);
+free_port:
+ kfree(port);
+fail:
+ return err;
+}
+
+/*
+ * The workhandler for config-space updates.
*
- * Finally we put our input buffer in the input queue, ready to receive. */
-static int __devinit virtcons_probe(struct virtio_device *dev)
+ * This is called when ports are hot-added.
+ */
+static void config_work_handler(struct work_struct *work)
+{
+ struct virtio_console_config virtconconf;
+ struct ports_device *portdev;
+ struct virtio_device *vdev;
+ int err;
+
+ portdev = container_of(work, struct ports_device, config_work);
+
+ vdev = portdev->vdev;
+ vdev->config->get(vdev,
+ offsetof(struct virtio_console_config, nr_ports),
+ &virtconconf.nr_ports,
+ sizeof(virtconconf.nr_ports));
+
+ if (portdev->config.nr_ports == virtconconf.nr_ports) {
+ /*
+ * Port 0 got hot-added. Since we already did all the
+ * other initialisation for it, just tell the Host
+ * that the port is ready if we find the port. In
+ * case the port was hot-removed earlier, we call
+ * add_port to add the port.
+ */
+ struct port *port;
+
+ port = find_port_by_id(portdev, 0);
+ if (!port)
+ add_port(portdev, 0);
+ else
+ send_control_msg(port, VIRTIO_CONSOLE_PORT_READY, 1);
+ return;
+ }
+ if (virtconconf.nr_ports > portdev->config.max_nr_ports) {
+ dev_warn(&vdev->dev,
+ "More ports specified (%u) than allowed (%u)",
+ portdev->config.nr_ports + 1,
+ portdev->config.max_nr_ports);
+ return;
+ }
+ if (virtconconf.nr_ports < portdev->config.nr_ports)
+ return;
+
+ /* Hot-add ports */
+ while (virtconconf.nr_ports - portdev->config.nr_ports) {
+ err = add_port(portdev, portdev->config.nr_ports);
+ if (err)
+ break;
+ portdev->config.nr_ports++;
+ }
+}
+
+static int init_vqs(struct ports_device *portdev)
{
- vq_callback_t *callbacks[] = { hvc_handle_input, NULL};
- const char *names[] = { "input", "output" };
- struct virtqueue *vqs[2];
+ vq_callback_t **io_callbacks;
+ char **io_names;
+ struct virtqueue **vqs;
+ u32 i, j, nr_ports, nr_queues;
int err;
- vdev = dev;
+ nr_ports = portdev->config.max_nr_ports;
+ nr_queues = use_multiport(portdev) ? (nr_ports + 1) * 2 : 2;
- /* This is the scratch page we use to receive console input */
- inbuf = kmalloc(PAGE_SIZE, GFP_KERNEL);
- if (!inbuf) {
+ vqs = kmalloc(nr_queues * sizeof(struct virtqueue *), GFP_KERNEL);
+ if (!vqs) {
err = -ENOMEM;
goto fail;
}
+ io_callbacks = kmalloc(nr_queues * sizeof(vq_callback_t *), GFP_KERNEL);
+ if (!io_callbacks) {
+ err = -ENOMEM;
+ goto free_vqs;
+ }
+ io_names = kmalloc(nr_queues * sizeof(char *), GFP_KERNEL);
+ if (!io_names) {
+ err = -ENOMEM;
+ goto free_callbacks;
+ }
+ portdev->in_vqs = kmalloc(nr_ports * sizeof(struct virtqueue *),
+ GFP_KERNEL);
+ if (!portdev->in_vqs) {
+ err = -ENOMEM;
+ goto free_names;
+ }
+ portdev->out_vqs = kmalloc(nr_ports * sizeof(struct virtqueue *),
+ GFP_KERNEL);
+ if (!portdev->out_vqs) {
+ err = -ENOMEM;
+ goto free_invqs;
+ }
+
+ /*
+ * For backward compat (newer host but older guest), the host
+ * spawns a console port first and also inits the vqs for port
+ * 0 before others.
+ */
+ j = 0;
+ io_callbacks[j] = in_intr;
+ io_callbacks[j + 1] = NULL;
+ io_names[j] = "input";
+ io_names[j + 1] = "output";
+ j += 2;
+ if (use_multiport(portdev)) {
+ io_callbacks[j] = control_intr;
+ io_callbacks[j + 1] = NULL;
+ io_names[j] = "control-i";
+ io_names[j + 1] = "control-o";
+
+ for (i = 1; i < nr_ports; i++) {
+ j += 2;
+ io_callbacks[j] = in_intr;
+ io_callbacks[j + 1] = NULL;
+ io_names[j] = "input";
+ io_names[j + 1] = "output";
+ }
+ }
/* Find the queues. */
- /* FIXME: This is why we want to wean off hvc: we do nothing
- * when input comes in. */
- err = vdev->config->find_vqs(vdev, 2, vqs, callbacks, names);
+ err = portdev->vdev->config->find_vqs(portdev->vdev, nr_queues, vqs,
+ io_callbacks,
+ (const char **)io_names);
if (err)
+ goto free_outvqs;
+
+ j = 0;
+ portdev->in_vqs[0] = vqs[0];
+ portdev->out_vqs[0] = vqs[1];
+ j += 2;
+ if (use_multiport(portdev)) {
+ portdev->c_ivq = vqs[j];
+ portdev->c_ovq = vqs[j + 1];
+
+ for (i = 1; i < nr_ports; i++) {
+ j += 2;
+ portdev->in_vqs[i] = vqs[j];
+ portdev->out_vqs[i] = vqs[j + 1];
+ }
+ }
+ kfree(io_callbacks);
+ kfree(io_names);
+ kfree(vqs);
+
+ return 0;
+
+free_names:
+ kfree(io_names);
+free_callbacks:
+ kfree(io_callbacks);
+free_outvqs:
+ kfree(portdev->out_vqs);
+free_invqs:
+ kfree(portdev->in_vqs);
+free_vqs:
+ kfree(vqs);
+fail:
+ return err;
+}
+
+static const struct file_operations portdev_fops = {
+ .owner = THIS_MODULE,
+};
+
+/*
+ * Once we're further in boot, we get probed like any other virtio
+ * device.
+ *
+ * If the host also supports multiple console ports, we check the
+ * config space to see how many ports the host has spawned. We
+ * initialize each port found.
+ */
+static int __devinit virtcons_probe(struct virtio_device *vdev)
+{
+ struct ports_device *portdev;
+ u32 i;
+ int err;
+ bool multiport;
+
+ portdev = kmalloc(sizeof(*portdev), GFP_KERNEL);
+ if (!portdev) {
+ err = -ENOMEM;
+ goto fail;
+ }
+
+ /* Attach this portdev to this virtio_device, and vice-versa. */
+ portdev->vdev = vdev;
+ vdev->priv = portdev;
+
+ spin_lock_irq(&pdrvdata_lock);
+ portdev->drv_index = pdrvdata.index++;
+ spin_unlock_irq(&pdrvdata_lock);
+
+ portdev->chr_major = register_chrdev(0, "virtio-portsdev",
+ &portdev_fops);
+ if (portdev->chr_major < 0) {
+ dev_err(&vdev->dev,
+ "Error %d registering chrdev for device %u\n",
+ portdev->chr_major, portdev->drv_index);
+ err = portdev->chr_major;
goto free;
+ }
- in_vq = vqs[0];
- out_vq = vqs[1];
+ multiport = false;
+ portdev->config.nr_ports = 1;
+ portdev->config.max_nr_ports = 1;
+ if (virtio_has_feature(vdev, VIRTIO_CONSOLE_F_MULTIPORT)) {
+ multiport = true;
+ vdev->features[0] |= 1 << VIRTIO_CONSOLE_F_MULTIPORT;
- /* Start using the new console output. */
- virtio_cons.get_chars = get_chars;
- virtio_cons.put_chars = put_chars;
- virtio_cons.notifier_add = notifier_add_vio;
- virtio_cons.notifier_del = notifier_del_vio;
- virtio_cons.notifier_hangup = notifier_del_vio;
-
- /* The first argument of hvc_alloc() is the virtual console number, so
- * we use zero. The second argument is the parameter for the
- * notification mechanism (like irq number). We currently leave this
- * as zero, virtqueues have implicit notifications.
- *
- * The third argument is a "struct hv_ops" containing the put_chars()
- * get_chars(), notifier_add() and notifier_del() pointers.
- * The final argument is the output buffer size: we can do any size,
- * so we put PAGE_SIZE here. */
- hvc = hvc_alloc(0, 0, &virtio_cons, PAGE_SIZE);
- if (IS_ERR(hvc)) {
- err = PTR_ERR(hvc);
- goto free_vqs;
+ vdev->config->get(vdev, offsetof(struct virtio_console_config,
+ nr_ports),
+ &portdev->config.nr_ports,
+ sizeof(portdev->config.nr_ports));
+ vdev->config->get(vdev, offsetof(struct virtio_console_config,
+ max_nr_ports),
+ &portdev->config.max_nr_ports,
+ sizeof(portdev->config.max_nr_ports));
+ if (portdev->config.nr_ports > portdev->config.max_nr_ports) {
+ dev_warn(&vdev->dev,
+ "More ports (%u) specified than allowed (%u). Will init %u ports.",
+ portdev->config.nr_ports,
+ portdev->config.max_nr_ports,
+ portdev->config.max_nr_ports);
+
+ portdev->config.nr_ports = portdev->config.max_nr_ports;
+ }
+ }
+
+ /* Let the Host know we support multiple ports.*/
+ vdev->config->finalize_features(vdev);
+
+ err = init_vqs(portdev);
+ if (err < 0) {
+ dev_err(&vdev->dev, "Error %d initializing vqs\n", err);
+ goto free_chrdev;
+ }
+
+ spin_lock_init(&portdev->ports_lock);
+ INIT_LIST_HEAD(&portdev->ports);
+
+ if (multiport) {
+ spin_lock_init(&portdev->cvq_lock);
+ INIT_WORK(&portdev->control_work, &control_work_handler);
+ INIT_WORK(&portdev->config_work, &config_work_handler);
+
+ err = fill_queue(portdev->c_ivq, &portdev->cvq_lock);
+ if (!err) {
+ dev_err(&vdev->dev,
+ "Error allocating buffers for control queue\n");
+ err = -ENOMEM;
+ goto free_vqs;
+ }
}
- /* Register the input buffer the first time. */
- add_inbuf();
+ for (i = 0; i < portdev->config.nr_ports; i++)
+ add_port(portdev, i);
+
+ /* Start using the new console output. */
+ early_put_chars = NULL;
return 0;
free_vqs:
vdev->config->del_vqs(vdev);
+ kfree(portdev->in_vqs);
+ kfree(portdev->out_vqs);
+free_chrdev:
+ unregister_chrdev(portdev->chr_major, "virtio-portsdev");
free:
- kfree(inbuf);
+ kfree(portdev);
fail:
return err;
}
+static void virtcons_remove(struct virtio_device *vdev)
+{
+ struct ports_device *portdev;
+ struct port *port, *port2;
+ struct port_buffer *buf;
+ unsigned int len;
+
+ portdev = vdev->priv;
+
+ cancel_work_sync(&portdev->control_work);
+ cancel_work_sync(&portdev->config_work);
+
+ list_for_each_entry_safe(port, port2, &portdev->ports, list)
+ remove_port(port);
+
+ unregister_chrdev(portdev->chr_major, "virtio-portsdev");
+
+ while ((buf = portdev->c_ivq->vq_ops->get_buf(portdev->c_ivq, &len)))
+ free_buf(buf);
+
+ while ((buf = portdev->c_ivq->vq_ops->detach_unused_buf(portdev->c_ivq)))
+ free_buf(buf);
+
+ vdev->config->del_vqs(vdev);
+ kfree(portdev->in_vqs);
+ kfree(portdev->out_vqs);
+
+ kfree(portdev);
+}
+
static struct virtio_device_id id_table[] = {
{ VIRTIO_ID_CONSOLE, VIRTIO_DEV_ANY_ID },
{ 0 },
static unsigned int features[] = {
VIRTIO_CONSOLE_F_SIZE,
+ VIRTIO_CONSOLE_F_MULTIPORT,
};
static struct virtio_driver virtio_console = {
.driver.owner = THIS_MODULE,
.id_table = id_table,
.probe = virtcons_probe,
- .config_changed = virtcons_apply_config,
+ .remove = virtcons_remove,
+ .config_changed = config_intr,
};
static int __init init(void)
{
+ int err;
+
+ pdrvdata.class = class_create(THIS_MODULE, "virtio-ports");
+ if (IS_ERR(pdrvdata.class)) {
+ err = PTR_ERR(pdrvdata.class);
+ pr_err("Error %d creating virtio-ports class\n", err);
+ return err;
+ }
+
+ pdrvdata.debugfs_dir = debugfs_create_dir("virtio-ports", NULL);
+ if (!pdrvdata.debugfs_dir) {
+ pr_warning("Error %ld creating debugfs dir for virtio-ports\n",
+ PTR_ERR(pdrvdata.debugfs_dir));
+ }
+ INIT_LIST_HEAD(&pdrvdata.consoles);
+
return register_virtio_driver(&virtio_console);
}
+
+static void __exit fini(void)
+{
+ unregister_virtio_driver(&virtio_console);
+
+ class_destroy(pdrvdata.class);
+ if (pdrvdata.debugfs_dir)
+ debugfs_remove_recursive(pdrvdata.debugfs_dir);
+}
module_init(init);
+module_exit(fini);
MODULE_DEVICE_TABLE(virtio, id_table);
MODULE_DESCRIPTION("Virtio console driver");
#define DRV_NAME "cs5535-clockevt"
-static int timer_irq = CONFIG_CS5535_MFGPT_DEFAULT_IRQ;
+static int timer_irq;
module_param_named(irq, timer_irq, int, 0644);
MODULE_PARM_DESC(irq, "Which IRQ to use for the clock source MFGPT ticks.");
MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
MODULE_DESCRIPTION("Generic userspace <-> kernelspace connector.");
-static u32 cn_idx = CN_IDX_CONNECTOR;
-static u32 cn_val = CN_VAL_CONNECTOR;
-
-module_param(cn_idx, uint, 0);
-module_param(cn_val, uint, 0);
-MODULE_PARM_DESC(cn_idx, "Connector's main device idx.");
-MODULE_PARM_DESC(cn_val, "Connector's main device val.");
-
-static DEFINE_MUTEX(notify_lock);
-static LIST_HEAD(notify_list);
-
static struct cn_dev cdev;
static int cn_already_initialized;
}
}
-/*
- * Notification routing.
- *
- * Gets id and checks if there are notification request for it's idx
- * and val. If there are such requests notify the listeners with the
- * given notify event.
- *
- */
-static void cn_notify(struct cb_id *id, u32 notify_event)
-{
- struct cn_ctl_entry *ent;
-
- mutex_lock(¬ify_lock);
- list_for_each_entry(ent, ¬ify_list, notify_entry) {
- int i;
- struct cn_notify_req *req;
- struct cn_ctl_msg *ctl = ent->msg;
- int idx_found, val_found;
-
- idx_found = val_found = 0;
-
- req = (struct cn_notify_req *)ctl->data;
- for (i = 0; i < ctl->idx_notify_num; ++i, ++req) {
- if (id->idx >= req->first &&
- id->idx < req->first + req->range) {
- idx_found = 1;
- break;
- }
- }
-
- for (i = 0; i < ctl->val_notify_num; ++i, ++req) {
- if (id->val >= req->first &&
- id->val < req->first + req->range) {
- val_found = 1;
- break;
- }
- }
-
- if (idx_found && val_found) {
- struct cn_msg m = { .ack = notify_event, };
-
- memcpy(&m.id, id, sizeof(m.id));
- cn_netlink_send(&m, ctl->group, GFP_KERNEL);
- }
- }
- mutex_unlock(¬ify_lock);
-}
-
/*
* Callback add routing - adds callback with given ID and name.
* If there is registered callback with the same ID it will not be added.
if (err)
return err;
- cn_notify(id, 0);
-
return 0;
}
EXPORT_SYMBOL_GPL(cn_add_callback);
struct cn_dev *dev = &cdev;
cn_queue_del_callback(dev->cbdev, id);
- cn_notify(id, 1);
}
EXPORT_SYMBOL_GPL(cn_del_callback);
-/*
- * Checks two connector's control messages to be the same.
- * Returns 1 if they are the same or if the first one is corrupted.
- */
-static int cn_ctl_msg_equals(struct cn_ctl_msg *m1, struct cn_ctl_msg *m2)
-{
- int i;
- struct cn_notify_req *req1, *req2;
-
- if (m1->idx_notify_num != m2->idx_notify_num)
- return 0;
-
- if (m1->val_notify_num != m2->val_notify_num)
- return 0;
-
- if (m1->len != m2->len)
- return 0;
-
- if ((m1->idx_notify_num + m1->val_notify_num) * sizeof(*req1) !=
- m1->len)
- return 1;
-
- req1 = (struct cn_notify_req *)m1->data;
- req2 = (struct cn_notify_req *)m2->data;
-
- for (i = 0; i < m1->idx_notify_num; ++i) {
- if (req1->first != req2->first || req1->range != req2->range)
- return 0;
- req1++;
- req2++;
- }
-
- for (i = 0; i < m1->val_notify_num; ++i) {
- if (req1->first != req2->first || req1->range != req2->range)
- return 0;
- req1++;
- req2++;
- }
-
- return 1;
-}
-
-/*
- * Main connector device's callback.
- *
- * Used for notification of a request's processing.
- */
-static void cn_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp)
-{
- struct cn_ctl_msg *ctl;
- struct cn_ctl_entry *ent;
- u32 size;
-
- if (msg->len < sizeof(*ctl))
- return;
-
- ctl = (struct cn_ctl_msg *)msg->data;
-
- size = (sizeof(*ctl) + ((ctl->idx_notify_num +
- ctl->val_notify_num) *
- sizeof(struct cn_notify_req)));
-
- if (msg->len != size)
- return;
-
- if (ctl->len + sizeof(*ctl) != msg->len)
- return;
-
- /*
- * Remove notification.
- */
- if (ctl->group == 0) {
- struct cn_ctl_entry *n;
-
- mutex_lock(¬ify_lock);
- list_for_each_entry_safe(ent, n, ¬ify_list, notify_entry) {
- if (cn_ctl_msg_equals(ent->msg, ctl)) {
- list_del(&ent->notify_entry);
- kfree(ent);
- }
- }
- mutex_unlock(¬ify_lock);
-
- return;
- }
-
- size += sizeof(*ent);
-
- ent = kzalloc(size, GFP_KERNEL);
- if (!ent)
- return;
-
- ent->msg = (struct cn_ctl_msg *)(ent + 1);
-
- memcpy(ent->msg, ctl, size - sizeof(*ent));
-
- mutex_lock(¬ify_lock);
- list_add(&ent->notify_entry, ¬ify_list);
- mutex_unlock(¬ify_lock);
-}
-
static int cn_proc_show(struct seq_file *m, void *v)
{
struct cn_queue_dev *dev = cdev.cbdev;
static int __devinit cn_init(void)
{
struct cn_dev *dev = &cdev;
- int err;
dev->input = cn_rx_skb;
- dev->id.idx = cn_idx;
- dev->id.val = cn_val;
dev->nls = netlink_kernel_create(&init_net, NETLINK_CONNECTOR,
CN_NETLINK_USERS + 0xf,
cn_already_initialized = 1;
- err = cn_add_callback(&dev->id, "connector", &cn_callback);
- if (err) {
- cn_already_initialized = 0;
- cn_queue_free_dev(dev->cbdev);
- netlink_kernel_release(dev->nls);
- return -EINVAL;
- }
-
proc_net_fops_create(&init_net, "connector", S_IRUGO, &cn_file_ops);
return 0;
proc_net_remove(&init_net, "connector");
- cn_del_callback(&dev->id);
cn_queue_free_dev(dev->cbdev);
netlink_kernel_release(dev->nls);
}
(dbs_tuners_ins.up_threshold -
dbs_tuners_ins.down_differential);
+ if (freq_next < policy->min)
+ freq_next = policy->min;
+
if (!dbs_tuners_ins.powersave_bias) {
__cpufreq_driver_target(policy, freq_next,
CPUFREQ_RELATION_L);
return crypto_shash_update(&dctx->fallback, data, length);
}
+static int padlock_sha_export(struct shash_desc *desc, void *out)
+{
+ struct padlock_sha_desc *dctx = shash_desc_ctx(desc);
+
+ return crypto_shash_export(&dctx->fallback, out);
+}
+
+static int padlock_sha_import(struct shash_desc *desc, const void *in)
+{
+ struct padlock_sha_desc *dctx = shash_desc_ctx(desc);
+ struct padlock_sha_ctx *ctx = crypto_shash_ctx(desc->tfm);
+
+ dctx->fallback.tfm = ctx->fallback;
+ dctx->fallback.flags = desc->flags & CRYPTO_TFM_REQ_MAY_SLEEP;
+ return crypto_shash_import(&dctx->fallback, in);
+}
+
static inline void padlock_output_block(uint32_t *src,
uint32_t *dst, size_t count)
{
.update = padlock_sha_update,
.finup = padlock_sha1_finup,
.final = padlock_sha1_final,
+ .export = padlock_sha_export,
+ .import = padlock_sha_import,
.descsize = sizeof(struct padlock_sha_desc),
+ .statesize = sizeof(struct sha1_state),
.base = {
.cra_name = "sha1",
.cra_driver_name = "sha1-padlock",
.update = padlock_sha_update,
.finup = padlock_sha256_finup,
.final = padlock_sha256_final,
+ .export = padlock_sha_export,
+ .import = padlock_sha_import,
.descsize = sizeof(struct padlock_sha_desc),
+ .statesize = sizeof(struct sha256_state),
.base = {
.cra_name = "sha256",
.cra_driver_name = "sha256-padlock",
cohd_fin->pending_irqs--;
cohc->completed = cohd_fin->desc.cookie;
- BUG_ON(cohc->nbr_active_done && cohd_fin == NULL);
-
if (cohc->nbr_active_done == 0)
return;
chan->dev->chan = NULL;
mutex_unlock(&dma_list_mutex);
device_unregister(&chan->dev->device);
+ free_percpu(chan->local);
}
}
EXPORT_SYMBOL(dma_async_device_unregister);
if (iterations > 0)
while (!kthread_should_stop()) {
- DECLARE_WAIT_QUEUE_HEAD(wait_dmatest_exit);
+ DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wait_dmatest_exit);
interruptible_sleep_on(&wait_dmatest_exit);
}
if (is_ioat_active(status) || is_ioat_idle(status))
ioat_suspend(chan);
while (is_ioat_active(status) || is_ioat_idle(status)) {
- if (end && time_after(jiffies, end)) {
+ if (tmo && time_after(jiffies, end)) {
err = -ETIMEDOUT;
break;
}
* @buffer_n: buffer number to update.
* 0 or 1 are the only valid values.
* @phyaddr: buffer physical address.
- * @return: Returns 0 on success or negative error code on failure. This
- * function will fail if the buffer is set to ready.
*/
/* Called under spin_lock(_irqsave)(&ichan->lock) */
-static int ipu_update_channel_buffer(struct idmac_channel *ichan,
- int buffer_n, dma_addr_t phyaddr)
+static void ipu_update_channel_buffer(struct idmac_channel *ichan,
+ int buffer_n, dma_addr_t phyaddr)
{
enum ipu_channel channel = ichan->dma_chan.chan_id;
uint32_t reg;
}
spin_unlock_irqrestore(&ipu_data.lock, flags);
-
- return 0;
}
/* Called under spin_lock_irqsave(&ichan->lock) */
{
unsigned int chan_id = ichan->dma_chan.chan_id;
struct device *dev = &ichan->dma_chan.dev->device;
- int ret;
if (async_tx_test_ack(&desc->txd))
return -EINTR;
* could make it conditional on status >= IPU_CHANNEL_ENABLED, but
* doing it again shouldn't hurt either.
*/
- ret = ipu_update_channel_buffer(ichan, buf_idx,
- sg_dma_address(sg));
-
- if (ret < 0) {
- dev_err(dev, "Updating sg %p on channel 0x%x buffer %d failed!\n",
- sg, chan_id, buf_idx);
- return ret;
- }
+ ipu_update_channel_buffer(ichan, buf_idx, sg_dma_address(sg));
ipu_select_buffer(chan_id, buf_idx);
dev_dbg(dev, "Updated sg %p on channel 0x%x buffer %d\n",
if (likely(sgnew) &&
ipu_submit_buffer(ichan, descnew, sgnew, ichan->active_buffer) < 0) {
- callback = desc->txd.callback;
- callback_param = desc->txd.callback_param;
+ callback = descnew->txd.callback;
+ callback_param = descnew->txd.callback_param;
spin_unlock(&ichan->lock);
- callback(callback_param);
+ if (callback)
+ callback(callback_param);
spin_lock(&ichan->lock);
}
* the memory system completely. A command line option allows to force-enable
* hardware ECC later in amd64_enable_ecc_error_reporting().
*/
-static const char *ecc_warning =
- "WARNING: ECC is disabled by BIOS. Module will NOT be loaded.\n"
- " Either Enable ECC in the BIOS, or set 'ecc_enable_override'.\n"
- " Also, use of the override can cause unknown side effects.\n";
+static const char *ecc_msg =
+ "ECC disabled in the BIOS or no ECC capability, module will not load.\n"
+ " Either enable ECC checking or force module loading by setting "
+ "'ecc_enable_override'.\n"
+ " (Note that use of the override may cause unknown side effects.)\n";
static int amd64_check_ecc_enabled(struct amd64_pvt *pvt)
{
ecc_enabled = !!(value & K8_NBCFG_ECC_ENABLE);
if (!ecc_enabled)
- amd64_printk(KERN_WARNING, "This node reports that Memory ECC "
+ amd64_printk(KERN_NOTICE, "This node reports that Memory ECC "
"is currently disabled, set F3x%x[22] (%s).\n",
K8_NBCFG, pci_name(pvt->misc_f3_ctl));
else
nb_mce_en = amd64_nb_mce_bank_enabled_on_node(pvt->mc_node_id);
if (!nb_mce_en)
- amd64_printk(KERN_WARNING, "NB MCE bank disabled, set MSR "
+ amd64_printk(KERN_NOTICE, "NB MCE bank disabled, set MSR "
"0x%08x[4] on node %d to enable.\n",
MSR_IA32_MCG_CTL, pvt->mc_node_id);
if (!ecc_enabled || !nb_mce_en) {
if (!ecc_enable_override) {
- amd64_printk(KERN_WARNING, "%s", ecc_warning);
+ amd64_printk(KERN_NOTICE, "%s", ecc_msg);
return -ENODEV;
}
ecc_enable_override = 0;
end <<= (24 - PAGE_SHIFT);
end |= (1 << (24 - PAGE_SHIFT)) - 1;
- csrow->first_page = start >> PAGE_SHIFT;
- csrow->last_page = end >> PAGE_SHIFT;
+ csrow->first_page = start;
+ csrow->last_page = end;
csrow->nr_pages = end + 1 - start;
csrow->grain = 8;
csrow->mtype = mtype;
mpc85xx_init_csrows(mci);
-#ifdef CONFIG_EDAC_DEBUG
- edac_mc_register_mcidev_debug((struct attribute **)debug_attr);
-#endif
-
/* store the original error disable bits */
orig_ddr_err_disable =
in_be32(pdata->mc_vbase + MPC85XX_MC_ERR_DISABLE);
static struct kmem_cache *fwnet_packet_task_cache;
+static void fwnet_free_ptask(struct fwnet_packet_task *ptask)
+{
+ dev_kfree_skb_any(ptask->skb);
+ kmem_cache_free(fwnet_packet_task_cache, ptask);
+}
+
static int fwnet_send_packet(struct fwnet_packet_task *ptask);
static void fwnet_transmit_packet_done(struct fwnet_packet_task *ptask)
{
- struct fwnet_device *dev;
+ struct fwnet_device *dev = ptask->dev;
unsigned long flags;
-
- dev = ptask->dev;
+ bool free;
spin_lock_irqsave(&dev->lock, flags);
- list_del(&ptask->pt_link);
- spin_unlock_irqrestore(&dev->lock, flags);
- ptask->outstanding_pkts--; /* FIXME access inside lock */
+ ptask->outstanding_pkts--;
+
+ /* Check whether we or the networking TX soft-IRQ is last user. */
+ free = (ptask->outstanding_pkts == 0 && !list_empty(&ptask->pt_link));
+
+ if (ptask->outstanding_pkts == 0)
+ list_del(&ptask->pt_link);
+
+ spin_unlock_irqrestore(&dev->lock, flags);
if (ptask->outstanding_pkts > 0) {
u16 dg_size;
ptask->max_payload = skb->len + RFC2374_FRAG_HDR_SIZE;
}
fwnet_send_packet(ptask);
- } else {
- dev_kfree_skb_any(ptask->skb);
- kmem_cache_free(fwnet_packet_task_cache, ptask);
}
+
+ if (free)
+ fwnet_free_ptask(ptask);
}
static void fwnet_write_complete(struct fw_card *card, int rcode,
unsigned tx_len;
struct rfc2734_header *bufhdr;
unsigned long flags;
+ bool free;
dev = ptask->dev;
tx_len = ptask->max_payload;
generation, SCODE_100, 0ULL, ptask->skb->data,
tx_len + 8, fwnet_write_complete, ptask);
- /* FIXME race? */
spin_lock_irqsave(&dev->lock, flags);
- list_add_tail(&ptask->pt_link, &dev->broadcasted_list);
+
+ /* If the AT tasklet already ran, we may be last user. */
+ free = (ptask->outstanding_pkts == 0 && list_empty(&ptask->pt_link));
+ if (!free)
+ list_add_tail(&ptask->pt_link, &dev->broadcasted_list);
+
spin_unlock_irqrestore(&dev->lock, flags);
- return 0;
+ goto out;
}
fw_send_request(dev->card, &ptask->transaction,
ptask->generation, ptask->speed, ptask->fifo_addr,
ptask->skb->data, tx_len, fwnet_write_complete, ptask);
- /* FIXME race? */
spin_lock_irqsave(&dev->lock, flags);
- list_add_tail(&ptask->pt_link, &dev->sent_list);
+
+ /* If the AT tasklet already ran, we may be last user. */
+ free = (ptask->outstanding_pkts == 0 && list_empty(&ptask->pt_link));
+ if (!free)
+ list_add_tail(&ptask->pt_link, &dev->sent_list);
+
spin_unlock_irqrestore(&dev->lock, flags);
dev->netdev->trans_start = jiffies;
+ out:
+ if (free)
+ fwnet_free_ptask(ptask);
return 0;
}
spin_unlock_irqrestore(&dev->lock, flags);
ptask->max_payload = max_payload;
+ INIT_LIST_HEAD(&ptask->pt_link);
+
fwnet_send_packet(ptask);
return NETDEV_TX_OK;
u32 payload_index, payload_end_index, next_page_index;
int page, end_page, i, length, offset;
- /*
- * FIXME: Cycle lost behavior should be configurable: lose
- * packet, retransmit or terminate..
- */
-
p = packet;
payload_index = payload;
if (!p->skip) {
d[0].control = cpu_to_le16(DESCRIPTOR_KEY_IMMEDIATE);
d[0].req_count = cpu_to_le16(8);
+ /*
+ * Link the skip address to this descriptor itself. This causes
+ * a context to skip a cycle whenever lost cycles or FIFO
+ * overruns occur, without dropping the data. The application
+ * should then decide whether this is an error condition or not.
+ * FIXME: Make the context's cycle-lost behaviour configurable?
+ */
+ d[0].branch_address = cpu_to_le32(d_bus | z);
header = (__le32 *) &d[1];
header[0] = cpu_to_le32(IT_HEADER_SY(p->sy) |
If M is selected, the module will be called radeon.
+source "drivers/gpu/drm/radeon/Kconfig"
+
config DRM_I810
tristate "Intel I810"
depends on DRM && AGP && AGP_INTEL
if (pci_set_dma_mask(dev->pdev, gart_info->table_mask)) {
DRM_ERROR("fail to set dma mask to 0x%Lx\n",
- gart_info->table_mask);
+ (unsigned long long)gart_info->table_mask);
ret = 1;
goto done;
}
return mode;
}
+/*
+ * EDID is delightfully ambiguous about how interlaced modes are to be
+ * encoded. Our internal representation is of frame height, but some
+ * HDTV detailed timings are encoded as field height.
+ *
+ * The format list here is from CEA, in frame size. Technically we
+ * should be checking refresh rate too. Whatever.
+ */
+static void
+drm_mode_do_interlace_quirk(struct drm_display_mode *mode,
+ struct detailed_pixel_timing *pt)
+{
+ int i;
+ static const struct {
+ int w, h;
+ } cea_interlaced[] = {
+ { 1920, 1080 },
+ { 720, 480 },
+ { 1440, 480 },
+ { 2880, 480 },
+ { 720, 576 },
+ { 1440, 576 },
+ { 2880, 576 },
+ };
+ static const int n_sizes =
+ sizeof(cea_interlaced)/sizeof(cea_interlaced[0]);
+
+ if (!(pt->misc & DRM_EDID_PT_INTERLACED))
+ return;
+
+ for (i = 0; i < n_sizes; i++) {
+ if ((mode->hdisplay == cea_interlaced[i].w) &&
+ (mode->vdisplay == cea_interlaced[i].h / 2)) {
+ mode->vdisplay *= 2;
+ mode->vsync_start *= 2;
+ mode->vsync_end *= 2;
+ mode->vtotal *= 2;
+ mode->vtotal |= 1;
+ }
+ }
+
+ mode->flags |= DRM_MODE_FLAG_INTERLACE;
+}
+
/**
* drm_mode_detailed - create a new mode from an EDID detailed timing section
* @dev: DRM device (needed to create new mode)
drm_mode_set_name(mode);
- if (pt->misc & DRM_EDID_PT_INTERLACED)
- mode->flags |= DRM_MODE_FLAG_INTERLACE;
+ drm_mode_do_interlace_quirk(mode, pt);
if (quirks & EDID_QUIRK_DETAILED_SYNC_PP) {
pt->misc |= DRM_EDID_PT_HSYNC_POSITIVE | DRM_EDID_PT_VSYNC_POSITIVE;
wasted += alignment - tmp;
}
- if (entry->size >= size + wasted) {
+ if (entry->size >= size + wasted &&
+ (entry->start + wasted + size) <= end) {
if (!best_match)
return entry;
if (entry->size < best_size) {
if (cmdbuf->num_cliprects) {
cliprects = kcalloc(cmdbuf->num_cliprects,
sizeof(struct drm_clip_rect), GFP_KERNEL);
- if (cliprects == NULL)
+ if (cliprects == NULL) {
+ ret = -ENOMEM;
goto fail_batch_free;
+ }
ret = copy_from_user(cliprects, cmdbuf->cliprects,
cmdbuf->num_cliprects *
const static struct intel_device_info intel_pineview_info = {
.is_g33 = 1, .is_pineview = 1, .is_mobile = 1, .is_i9xx = 1,
- .has_pipe_cxsr = 1,
+ .need_gfx_hws = 1,
.has_hotplug = 1,
};
MODULE_DEVICE_TABLE(pci, pciidlist);
#endif
-static int i915_suspend(struct drm_device *dev, pm_message_t state)
+static int i915_drm_freeze(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- if (!dev || !dev_priv) {
- DRM_ERROR("dev: %p, dev_priv: %p\n", dev, dev_priv);
- DRM_ERROR("DRM not initialized, aborting suspend.\n");
- return -ENODEV;
- }
-
- if (state.event == PM_EVENT_PRETHAW)
- return 0;
-
pci_save_state(dev->pdev);
/* If KMS is active, we do the leavevt stuff here */
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
- if (i915_gem_idle(dev))
+ int error = i915_gem_idle(dev);
+ if (error) {
dev_err(&dev->pdev->dev,
- "GEM idle failed, resume may fail\n");
+ "GEM idle failed, resume might fail\n");
+ return error;
+ }
drm_irq_uninstall(dev);
}
intel_opregion_free(dev, 1);
+ /* Modeset on resume, not lid events */
+ dev_priv->modeset_on_lid = 0;
+
+ return 0;
+}
+
+static int i915_suspend(struct drm_device *dev, pm_message_t state)
+{
+ int error;
+
+ if (!dev || !dev->dev_private) {
+ DRM_ERROR("dev: %p\n", dev);
+ DRM_ERROR("DRM not initialized, aborting suspend.\n");
+ return -ENODEV;
+ }
+
+ if (state.event == PM_EVENT_PRETHAW)
+ return 0;
+
+ error = i915_drm_freeze(dev);
+ if (error)
+ return error;
+
if (state.event == PM_EVENT_SUSPEND) {
/* Shut down the device */
pci_disable_device(dev->pdev);
pci_set_power_state(dev->pdev, PCI_D3hot);
}
- /* Modeset on resume, not lid events */
- dev_priv->modeset_on_lid = 0;
-
return 0;
}
-static int i915_resume(struct drm_device *dev)
+static int i915_drm_thaw(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- int ret = 0;
-
- if (pci_enable_device(dev->pdev))
- return -1;
- pci_set_master(dev->pdev);
+ int error = 0;
i915_restore_state(dev);
mutex_lock(&dev->struct_mutex);
dev_priv->mm.suspended = 0;
- ret = i915_gem_init_ringbuffer(dev);
- if (ret != 0)
- ret = -1;
+ error = i915_gem_init_ringbuffer(dev);
mutex_unlock(&dev->struct_mutex);
drm_irq_install(dev);
- }
- if (drm_core_check_feature(dev, DRIVER_MODESET)) {
+
/* Resume the modeset for every activated CRTC */
drm_helper_resume_force_mode(dev);
}
dev_priv->modeset_on_lid = 0;
- return ret;
+ return error;
+}
+
+static int i915_resume(struct drm_device *dev)
+{
+ if (pci_enable_device(dev->pdev))
+ return -EIO;
+
+ pci_set_master(dev->pdev);
+
+ return i915_drm_thaw(dev);
}
/**
drm_put_dev(dev);
}
-static int
-i915_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+static int i915_pm_suspend(struct device *dev)
{
- struct drm_device *dev = pci_get_drvdata(pdev);
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct drm_device *drm_dev = pci_get_drvdata(pdev);
+ int error;
- return i915_suspend(dev, state);
-}
+ if (!drm_dev || !drm_dev->dev_private) {
+ dev_err(dev, "DRM not initialized, aborting suspend.\n");
+ return -ENODEV;
+ }
-static int
-i915_pci_resume(struct pci_dev *pdev)
-{
- struct drm_device *dev = pci_get_drvdata(pdev);
+ error = i915_drm_freeze(drm_dev);
+ if (error)
+ return error;
- return i915_resume(dev);
-}
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, PCI_D3hot);
-static int
-i915_pm_suspend(struct device *dev)
-{
- return i915_pci_suspend(to_pci_dev(dev), PMSG_SUSPEND);
+ return 0;
}
-static int
-i915_pm_resume(struct device *dev)
+static int i915_pm_resume(struct device *dev)
{
- return i915_pci_resume(to_pci_dev(dev));
-}
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct drm_device *drm_dev = pci_get_drvdata(pdev);
-static int
-i915_pm_freeze(struct device *dev)
-{
- return i915_pci_suspend(to_pci_dev(dev), PMSG_FREEZE);
+ return i915_resume(drm_dev);
}
-static int
-i915_pm_thaw(struct device *dev)
+static int i915_pm_freeze(struct device *dev)
{
- /* thaw during hibernate, do nothing! */
- return 0;
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct drm_device *drm_dev = pci_get_drvdata(pdev);
+
+ if (!drm_dev || !drm_dev->dev_private) {
+ dev_err(dev, "DRM not initialized, aborting suspend.\n");
+ return -ENODEV;
+ }
+
+ return i915_drm_freeze(drm_dev);
}
-static int
-i915_pm_poweroff(struct device *dev)
+static int i915_pm_thaw(struct device *dev)
{
- return i915_pci_suspend(to_pci_dev(dev), PMSG_HIBERNATE);
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct drm_device *drm_dev = pci_get_drvdata(pdev);
+
+ return i915_drm_thaw(drm_dev);
}
-static int
-i915_pm_restore(struct device *dev)
+static int i915_pm_poweroff(struct device *dev)
{
- return i915_pci_resume(to_pci_dev(dev));
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct drm_device *drm_dev = pci_get_drvdata(pdev);
+
+ return i915_drm_freeze(drm_dev);
}
const struct dev_pm_ops i915_pm_ops = {
.freeze = i915_pm_freeze,
.thaw = i915_pm_thaw,
.poweroff = i915_pm_poweroff,
- .restore = i915_pm_restore,
+ .restore = i915_pm_resume,
};
static struct vm_operations_struct i915_gem_vm_ops = {
*/
struct list_head flushing_list;
+ /**
+ * List of objects currently pending a GPU write flush.
+ *
+ * All elements on this list will belong to either the
+ * active_list or flushing_list, last_rendering_seqno can
+ * be used to differentiate between the two elements.
+ */
+ struct list_head gpu_write_list;
+
/**
* LRU list of objects which are not in the ringbuffer and
* are ready to unbind, but are still in the GTT.
/** This object's place on the active/flushing/inactive lists */
struct list_head list;
+ /** This object's place on GPU write list */
+ struct list_head gpu_write_list;
/** This object's place on the fenced object LRU */
struct list_head fence_list;
else
list_move_tail(&obj_priv->list, &dev_priv->mm.inactive_list);
+ BUG_ON(!list_empty(&obj_priv->gpu_write_list));
+
obj_priv->last_rendering_seqno = 0;
if (obj_priv->active) {
obj_priv->active = 0;
struct drm_i915_gem_object *obj_priv, *next;
list_for_each_entry_safe(obj_priv, next,
- &dev_priv->mm.flushing_list, list) {
+ &dev_priv->mm.gpu_write_list,
+ gpu_write_list) {
struct drm_gem_object *obj = obj_priv->obj;
if ((obj->write_domain & flush_domains) ==
uint32_t old_write_domain = obj->write_domain;
obj->write_domain = 0;
+ list_del_init(&obj_priv->gpu_write_list);
i915_gem_object_move_to_active(obj, seqno);
trace_i915_gem_object_change_domain(obj,
i915_gem_evict_everything(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
- uint32_t seqno;
int ret;
+ uint32_t seqno;
bool lists_empty;
spin_lock(&dev_priv->mm.active_list_lock);
if (ret)
return ret;
+ BUG_ON(!list_empty(&dev_priv->mm.flushing_list));
+
ret = i915_gem_evict_from_inactive_list(dev);
if (ret)
return ret;
old_write_domain = obj->write_domain;
i915_gem_flush(dev, 0, obj->write_domain);
seqno = i915_add_request(dev, NULL, obj->write_domain);
- obj->write_domain = 0;
+ BUG_ON(obj->write_domain);
i915_gem_object_move_to_active(obj, seqno);
trace_i915_gem_object_change_domain(obj,
uint32_t reloc_count = 0, i;
int ret = 0;
+ if (relocs == NULL)
+ return 0;
+
for (i = 0; i < buffer_count; i++) {
struct drm_i915_gem_relocation_entry __user *user_relocs;
int unwritten;
struct drm_gem_object *batch_obj;
struct drm_i915_gem_object *obj_priv;
struct drm_clip_rect *cliprects = NULL;
- struct drm_i915_gem_relocation_entry *relocs;
+ struct drm_i915_gem_relocation_entry *relocs = NULL;
int ret = 0, ret2, i, pinned = 0;
uint64_t exec_offset;
uint32_t seqno, flush_domains, reloc_index;
if (args->num_cliprects != 0) {
cliprects = kcalloc(args->num_cliprects, sizeof(*cliprects),
GFP_KERNEL);
- if (cliprects == NULL)
+ if (cliprects == NULL) {
+ ret = -ENOMEM;
goto pre_mutex_err;
+ }
ret = copy_from_user(cliprects,
(struct drm_clip_rect __user *)
if (object_list[i] == NULL) {
DRM_ERROR("Invalid object handle %d at index %d\n",
exec_list[i].handle, i);
+ /* prevent error path from reading uninitialized data */
+ args->buffer_count = i + 1;
ret = -EBADF;
goto err;
}
if (obj_priv->in_execbuffer) {
DRM_ERROR("Object %p appears more than once in object list\n",
object_list[i]);
+ /* prevent error path from reading uninitialized data */
+ args->buffer_count = i + 1;
ret = -EBADF;
goto err;
}
i915_gem_flush(dev,
dev->invalidate_domains,
dev->flush_domains);
- if (dev->flush_domains)
+ if (dev->flush_domains & I915_GEM_GPU_DOMAINS)
(void)i915_add_request(dev, file_priv,
dev->flush_domains);
}
for (i = 0; i < args->buffer_count; i++) {
struct drm_gem_object *obj = object_list[i];
+ struct drm_i915_gem_object *obj_priv = obj->driver_private;
uint32_t old_write_domain = obj->write_domain;
obj->write_domain = obj->pending_write_domain;
+ if (obj->write_domain)
+ list_move_tail(&obj_priv->gpu_write_list,
+ &dev_priv->mm.gpu_write_list);
+ else
+ list_del_init(&obj_priv->gpu_write_list);
+
trace_i915_gem_object_change_domain(obj,
obj->read_domains,
old_write_domain);
mutex_unlock(&dev->struct_mutex);
+pre_mutex_err:
/* Copy the updated relocations out regardless of current error
* state. Failure to update the relocs would mean that the next
* time userland calls execbuf, it would do so with presumed offset
ret = ret2;
}
-pre_mutex_err:
drm_free_large(object_list);
kfree(cliprects);
obj_priv->obj = obj;
obj_priv->fence_reg = I915_FENCE_REG_NONE;
INIT_LIST_HEAD(&obj_priv->list);
+ INIT_LIST_HEAD(&obj_priv->gpu_write_list);
INIT_LIST_HEAD(&obj_priv->fence_list);
obj_priv->madv = I915_MADV_WILLNEED;
spin_lock_init(&dev_priv->mm.active_list_lock);
INIT_LIST_HEAD(&dev_priv->mm.active_list);
INIT_LIST_HEAD(&dev_priv->mm.flushing_list);
+ INIT_LIST_HEAD(&dev_priv->mm.gpu_write_list);
INIT_LIST_HEAD(&dev_priv->mm.inactive_list);
INIT_LIST_HEAD(&dev_priv->mm.request_list);
INIT_LIST_HEAD(&dev_priv->mm.fence_list);
if (de_iir & DE_GSE)
ironlake_opregion_gse_intr(dev);
+ if (de_iir & DE_PLANEA_FLIP_DONE) {
+ intel_prepare_page_flip(dev, 0);
+ intel_finish_page_flip(dev, 0);
+ }
+
+ if (de_iir & DE_PLANEB_FLIP_DONE) {
+ intel_prepare_page_flip(dev, 1);
+ intel_finish_page_flip(dev, 1);
+ }
+
+ if (de_iir & DE_PIPEA_VBLANK)
+ drm_handle_vblank(dev, 0);
+
+ if (de_iir & DE_PIPEB_VBLANK)
+ drm_handle_vblank(dev, 1);
+
/* check event from PCH */
if ((de_iir & DE_PCH_EVENT) &&
(pch_iir & SDE_HOTPLUG_MASK)) {
if (!(pipeconf & PIPEACONF_ENABLE))
return -EINVAL;
- if (IS_IRONLAKE(dev))
- return 0;
-
spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
- if (IS_I965G(dev))
+ if (IS_IRONLAKE(dev))
+ ironlake_enable_display_irq(dev_priv, (pipe == 0) ?
+ DE_PIPEA_VBLANK: DE_PIPEB_VBLANK);
+ else if (IS_I965G(dev))
i915_enable_pipestat(dev_priv, pipe,
PIPE_START_VBLANK_INTERRUPT_ENABLE);
else
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long irqflags;
- if (IS_IRONLAKE(dev))
- return;
-
spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
- i915_disable_pipestat(dev_priv, pipe,
- PIPE_VBLANK_INTERRUPT_ENABLE |
- PIPE_START_VBLANK_INTERRUPT_ENABLE);
+ if (IS_IRONLAKE(dev))
+ ironlake_disable_display_irq(dev_priv, (pipe == 0) ?
+ DE_PIPEA_VBLANK: DE_PIPEB_VBLANK);
+ else
+ i915_disable_pipestat(dev_priv, pipe,
+ PIPE_VBLANK_INTERRUPT_ENABLE |
+ PIPE_START_VBLANK_INTERRUPT_ENABLE);
spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
}
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
/* enable kind of interrupts always enabled */
- u32 display_mask = DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT;
+ u32 display_mask = DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT |
+ DE_PLANEA_FLIP_DONE | DE_PLANEB_FLIP_DONE;
u32 render_mask = GT_USER_INTERRUPT;
u32 hotplug_mask = SDE_CRT_HOTPLUG | SDE_PORTB_HOTPLUG |
SDE_PORTC_HOTPLUG | SDE_PORTD_HOTPLUG;
dev_priv->irq_mask_reg = ~display_mask;
- dev_priv->de_irq_enable_reg = display_mask;
+ dev_priv->de_irq_enable_reg = display_mask | DE_PIPEA_VBLANK | DE_PIPEB_VBLANK;
/* should always can generate irq */
I915_WRITE(DEIIR, I915_READ(DEIIR));
#define FBC_CTL_PERIODIC (1<<30)
#define FBC_CTL_INTERVAL_SHIFT (16)
#define FBC_CTL_UNCOMPRESSIBLE (1<<14)
+#define FBC_C3_IDLE (1<<13)
#define FBC_CTL_STRIDE_SHIFT (5)
#define FBC_CTL_FENCENO (1<<0)
#define FBC_COMMAND 0x0320c
adpa = I915_READ(PCH_ADPA);
adpa &= ~ADPA_CRT_HOTPLUG_MASK;
+ /* disable HPD first */
+ I915_WRITE(PCH_ADPA, adpa);
+ (void)I915_READ(PCH_ADPA);
adpa |= (ADPA_CRT_HOTPLUG_PERIOD_128 |
ADPA_CRT_HOTPLUG_WARMUP_10MS |
#define IRONLAKE_DOT_MAX 350000
#define IRONLAKE_VCO_MIN 1760000
#define IRONLAKE_VCO_MAX 3510000
-#define IRONLAKE_N_MIN 1
-#define IRONLAKE_N_MAX 6
-#define IRONLAKE_M_MIN 79
-#define IRONLAKE_M_MAX 127
#define IRONLAKE_M1_MIN 12
#define IRONLAKE_M1_MAX 22
#define IRONLAKE_M2_MIN 5
#define IRONLAKE_M2_MAX 9
-#define IRONLAKE_P_SDVO_DAC_MIN 5
-#define IRONLAKE_P_SDVO_DAC_MAX 80
-#define IRONLAKE_P_LVDS_MIN 28
-#define IRONLAKE_P_LVDS_MAX 112
-#define IRONLAKE_P1_MIN 1
-#define IRONLAKE_P1_MAX 8
-#define IRONLAKE_P2_SDVO_DAC_SLOW 10
-#define IRONLAKE_P2_SDVO_DAC_FAST 5
-#define IRONLAKE_P2_LVDS_SLOW 14 /* single channel */
-#define IRONLAKE_P2_LVDS_FAST 7 /* double channel */
#define IRONLAKE_P2_DOT_LIMIT 225000 /* 225Mhz */
-#define IRONLAKE_P_DISPLAY_PORT_MIN 10
-#define IRONLAKE_P_DISPLAY_PORT_MAX 20
-#define IRONLAKE_P2_DISPLAY_PORT_FAST 10
-#define IRONLAKE_P2_DISPLAY_PORT_SLOW 10
-#define IRONLAKE_P2_DISPLAY_PORT_LIMIT 0
-#define IRONLAKE_P1_DISPLAY_PORT_MIN 1
-#define IRONLAKE_P1_DISPLAY_PORT_MAX 2
+/* We have parameter ranges for different type of outputs. */
+
+/* DAC & HDMI Refclk 120Mhz */
+#define IRONLAKE_DAC_N_MIN 1
+#define IRONLAKE_DAC_N_MAX 5
+#define IRONLAKE_DAC_M_MIN 79
+#define IRONLAKE_DAC_M_MAX 127
+#define IRONLAKE_DAC_P_MIN 5
+#define IRONLAKE_DAC_P_MAX 80
+#define IRONLAKE_DAC_P1_MIN 1
+#define IRONLAKE_DAC_P1_MAX 8
+#define IRONLAKE_DAC_P2_SLOW 10
+#define IRONLAKE_DAC_P2_FAST 5
+
+/* LVDS single-channel 120Mhz refclk */
+#define IRONLAKE_LVDS_S_N_MIN 1
+#define IRONLAKE_LVDS_S_N_MAX 3
+#define IRONLAKE_LVDS_S_M_MIN 79
+#define IRONLAKE_LVDS_S_M_MAX 118
+#define IRONLAKE_LVDS_S_P_MIN 28
+#define IRONLAKE_LVDS_S_P_MAX 112
+#define IRONLAKE_LVDS_S_P1_MIN 2
+#define IRONLAKE_LVDS_S_P1_MAX 8
+#define IRONLAKE_LVDS_S_P2_SLOW 14
+#define IRONLAKE_LVDS_S_P2_FAST 14
+
+/* LVDS dual-channel 120Mhz refclk */
+#define IRONLAKE_LVDS_D_N_MIN 1
+#define IRONLAKE_LVDS_D_N_MAX 3
+#define IRONLAKE_LVDS_D_M_MIN 79
+#define IRONLAKE_LVDS_D_M_MAX 127
+#define IRONLAKE_LVDS_D_P_MIN 14
+#define IRONLAKE_LVDS_D_P_MAX 56
+#define IRONLAKE_LVDS_D_P1_MIN 2
+#define IRONLAKE_LVDS_D_P1_MAX 8
+#define IRONLAKE_LVDS_D_P2_SLOW 7
+#define IRONLAKE_LVDS_D_P2_FAST 7
+
+/* LVDS single-channel 100Mhz refclk */
+#define IRONLAKE_LVDS_S_SSC_N_MIN 1
+#define IRONLAKE_LVDS_S_SSC_N_MAX 2
+#define IRONLAKE_LVDS_S_SSC_M_MIN 79
+#define IRONLAKE_LVDS_S_SSC_M_MAX 126
+#define IRONLAKE_LVDS_S_SSC_P_MIN 28
+#define IRONLAKE_LVDS_S_SSC_P_MAX 112
+#define IRONLAKE_LVDS_S_SSC_P1_MIN 2
+#define IRONLAKE_LVDS_S_SSC_P1_MAX 8
+#define IRONLAKE_LVDS_S_SSC_P2_SLOW 14
+#define IRONLAKE_LVDS_S_SSC_P2_FAST 14
+
+/* LVDS dual-channel 100Mhz refclk */
+#define IRONLAKE_LVDS_D_SSC_N_MIN 1
+#define IRONLAKE_LVDS_D_SSC_N_MAX 3
+#define IRONLAKE_LVDS_D_SSC_M_MIN 79
+#define IRONLAKE_LVDS_D_SSC_M_MAX 126
+#define IRONLAKE_LVDS_D_SSC_P_MIN 14
+#define IRONLAKE_LVDS_D_SSC_P_MAX 42
+#define IRONLAKE_LVDS_D_SSC_P1_MIN 2
+#define IRONLAKE_LVDS_D_SSC_P1_MAX 6
+#define IRONLAKE_LVDS_D_SSC_P2_SLOW 7
+#define IRONLAKE_LVDS_D_SSC_P2_FAST 7
+
+/* DisplayPort */
+#define IRONLAKE_DP_N_MIN 1
+#define IRONLAKE_DP_N_MAX 2
+#define IRONLAKE_DP_M_MIN 81
+#define IRONLAKE_DP_M_MAX 90
+#define IRONLAKE_DP_P_MIN 10
+#define IRONLAKE_DP_P_MAX 20
+#define IRONLAKE_DP_P2_FAST 10
+#define IRONLAKE_DP_P2_SLOW 10
+#define IRONLAKE_DP_P2_LIMIT 0
+#define IRONLAKE_DP_P1_MIN 1
+#define IRONLAKE_DP_P1_MAX 2
static bool
intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
.find_pll = intel_find_best_PLL,
};
-static const intel_limit_t intel_limits_ironlake_sdvo = {
+static const intel_limit_t intel_limits_ironlake_dac = {
.dot = { .min = IRONLAKE_DOT_MIN, .max = IRONLAKE_DOT_MAX },
.vco = { .min = IRONLAKE_VCO_MIN, .max = IRONLAKE_VCO_MAX },
- .n = { .min = IRONLAKE_N_MIN, .max = IRONLAKE_N_MAX },
- .m = { .min = IRONLAKE_M_MIN, .max = IRONLAKE_M_MAX },
+ .n = { .min = IRONLAKE_DAC_N_MIN, .max = IRONLAKE_DAC_N_MAX },
+ .m = { .min = IRONLAKE_DAC_M_MIN, .max = IRONLAKE_DAC_M_MAX },
.m1 = { .min = IRONLAKE_M1_MIN, .max = IRONLAKE_M1_MAX },
.m2 = { .min = IRONLAKE_M2_MIN, .max = IRONLAKE_M2_MAX },
- .p = { .min = IRONLAKE_P_SDVO_DAC_MIN, .max = IRONLAKE_P_SDVO_DAC_MAX },
- .p1 = { .min = IRONLAKE_P1_MIN, .max = IRONLAKE_P1_MAX },
+ .p = { .min = IRONLAKE_DAC_P_MIN, .max = IRONLAKE_DAC_P_MAX },
+ .p1 = { .min = IRONLAKE_DAC_P1_MIN, .max = IRONLAKE_DAC_P1_MAX },
.p2 = { .dot_limit = IRONLAKE_P2_DOT_LIMIT,
- .p2_slow = IRONLAKE_P2_SDVO_DAC_SLOW,
- .p2_fast = IRONLAKE_P2_SDVO_DAC_FAST },
+ .p2_slow = IRONLAKE_DAC_P2_SLOW,
+ .p2_fast = IRONLAKE_DAC_P2_FAST },
.find_pll = intel_g4x_find_best_PLL,
};
-static const intel_limit_t intel_limits_ironlake_lvds = {
+static const intel_limit_t intel_limits_ironlake_single_lvds = {
.dot = { .min = IRONLAKE_DOT_MIN, .max = IRONLAKE_DOT_MAX },
.vco = { .min = IRONLAKE_VCO_MIN, .max = IRONLAKE_VCO_MAX },
- .n = { .min = IRONLAKE_N_MIN, .max = IRONLAKE_N_MAX },
- .m = { .min = IRONLAKE_M_MIN, .max = IRONLAKE_M_MAX },
+ .n = { .min = IRONLAKE_LVDS_S_N_MIN, .max = IRONLAKE_LVDS_S_N_MAX },
+ .m = { .min = IRONLAKE_LVDS_S_M_MIN, .max = IRONLAKE_LVDS_S_M_MAX },
.m1 = { .min = IRONLAKE_M1_MIN, .max = IRONLAKE_M1_MAX },
.m2 = { .min = IRONLAKE_M2_MIN, .max = IRONLAKE_M2_MAX },
- .p = { .min = IRONLAKE_P_LVDS_MIN, .max = IRONLAKE_P_LVDS_MAX },
- .p1 = { .min = IRONLAKE_P1_MIN, .max = IRONLAKE_P1_MAX },
+ .p = { .min = IRONLAKE_LVDS_S_P_MIN, .max = IRONLAKE_LVDS_S_P_MAX },
+ .p1 = { .min = IRONLAKE_LVDS_S_P1_MIN, .max = IRONLAKE_LVDS_S_P1_MAX },
.p2 = { .dot_limit = IRONLAKE_P2_DOT_LIMIT,
- .p2_slow = IRONLAKE_P2_LVDS_SLOW,
- .p2_fast = IRONLAKE_P2_LVDS_FAST },
+ .p2_slow = IRONLAKE_LVDS_S_P2_SLOW,
+ .p2_fast = IRONLAKE_LVDS_S_P2_FAST },
+ .find_pll = intel_g4x_find_best_PLL,
+};
+
+static const intel_limit_t intel_limits_ironlake_dual_lvds = {
+ .dot = { .min = IRONLAKE_DOT_MIN, .max = IRONLAKE_DOT_MAX },
+ .vco = { .min = IRONLAKE_VCO_MIN, .max = IRONLAKE_VCO_MAX },
+ .n = { .min = IRONLAKE_LVDS_D_N_MIN, .max = IRONLAKE_LVDS_D_N_MAX },
+ .m = { .min = IRONLAKE_LVDS_D_M_MIN, .max = IRONLAKE_LVDS_D_M_MAX },
+ .m1 = { .min = IRONLAKE_M1_MIN, .max = IRONLAKE_M1_MAX },
+ .m2 = { .min = IRONLAKE_M2_MIN, .max = IRONLAKE_M2_MAX },
+ .p = { .min = IRONLAKE_LVDS_D_P_MIN, .max = IRONLAKE_LVDS_D_P_MAX },
+ .p1 = { .min = IRONLAKE_LVDS_D_P1_MIN, .max = IRONLAKE_LVDS_D_P1_MAX },
+ .p2 = { .dot_limit = IRONLAKE_P2_DOT_LIMIT,
+ .p2_slow = IRONLAKE_LVDS_D_P2_SLOW,
+ .p2_fast = IRONLAKE_LVDS_D_P2_FAST },
+ .find_pll = intel_g4x_find_best_PLL,
+};
+
+static const intel_limit_t intel_limits_ironlake_single_lvds_100m = {
+ .dot = { .min = IRONLAKE_DOT_MIN, .max = IRONLAKE_DOT_MAX },
+ .vco = { .min = IRONLAKE_VCO_MIN, .max = IRONLAKE_VCO_MAX },
+ .n = { .min = IRONLAKE_LVDS_S_SSC_N_MIN, .max = IRONLAKE_LVDS_S_SSC_N_MAX },
+ .m = { .min = IRONLAKE_LVDS_S_SSC_M_MIN, .max = IRONLAKE_LVDS_S_SSC_M_MAX },
+ .m1 = { .min = IRONLAKE_M1_MIN, .max = IRONLAKE_M1_MAX },
+ .m2 = { .min = IRONLAKE_M2_MIN, .max = IRONLAKE_M2_MAX },
+ .p = { .min = IRONLAKE_LVDS_S_SSC_P_MIN, .max = IRONLAKE_LVDS_S_SSC_P_MAX },
+ .p1 = { .min = IRONLAKE_LVDS_S_SSC_P1_MIN,.max = IRONLAKE_LVDS_S_SSC_P1_MAX },
+ .p2 = { .dot_limit = IRONLAKE_P2_DOT_LIMIT,
+ .p2_slow = IRONLAKE_LVDS_S_SSC_P2_SLOW,
+ .p2_fast = IRONLAKE_LVDS_S_SSC_P2_FAST },
+ .find_pll = intel_g4x_find_best_PLL,
+};
+
+static const intel_limit_t intel_limits_ironlake_dual_lvds_100m = {
+ .dot = { .min = IRONLAKE_DOT_MIN, .max = IRONLAKE_DOT_MAX },
+ .vco = { .min = IRONLAKE_VCO_MIN, .max = IRONLAKE_VCO_MAX },
+ .n = { .min = IRONLAKE_LVDS_D_SSC_N_MIN, .max = IRONLAKE_LVDS_D_SSC_N_MAX },
+ .m = { .min = IRONLAKE_LVDS_D_SSC_M_MIN, .max = IRONLAKE_LVDS_D_SSC_M_MAX },
+ .m1 = { .min = IRONLAKE_M1_MIN, .max = IRONLAKE_M1_MAX },
+ .m2 = { .min = IRONLAKE_M2_MIN, .max = IRONLAKE_M2_MAX },
+ .p = { .min = IRONLAKE_LVDS_D_SSC_P_MIN, .max = IRONLAKE_LVDS_D_SSC_P_MAX },
+ .p1 = { .min = IRONLAKE_LVDS_D_SSC_P1_MIN,.max = IRONLAKE_LVDS_D_SSC_P1_MAX },
+ .p2 = { .dot_limit = IRONLAKE_P2_DOT_LIMIT,
+ .p2_slow = IRONLAKE_LVDS_D_SSC_P2_SLOW,
+ .p2_fast = IRONLAKE_LVDS_D_SSC_P2_FAST },
.find_pll = intel_g4x_find_best_PLL,
};
.max = IRONLAKE_DOT_MAX },
.vco = { .min = IRONLAKE_VCO_MIN,
.max = IRONLAKE_VCO_MAX},
- .n = { .min = IRONLAKE_N_MIN,
- .max = IRONLAKE_N_MAX },
- .m = { .min = IRONLAKE_M_MIN,
- .max = IRONLAKE_M_MAX },
+ .n = { .min = IRONLAKE_DP_N_MIN,
+ .max = IRONLAKE_DP_N_MAX },
+ .m = { .min = IRONLAKE_DP_M_MIN,
+ .max = IRONLAKE_DP_M_MAX },
.m1 = { .min = IRONLAKE_M1_MIN,
.max = IRONLAKE_M1_MAX },
.m2 = { .min = IRONLAKE_M2_MIN,
.max = IRONLAKE_M2_MAX },
- .p = { .min = IRONLAKE_P_DISPLAY_PORT_MIN,
- .max = IRONLAKE_P_DISPLAY_PORT_MAX },
- .p1 = { .min = IRONLAKE_P1_DISPLAY_PORT_MIN,
- .max = IRONLAKE_P1_DISPLAY_PORT_MAX},
- .p2 = { .dot_limit = IRONLAKE_P2_DISPLAY_PORT_LIMIT,
- .p2_slow = IRONLAKE_P2_DISPLAY_PORT_SLOW,
- .p2_fast = IRONLAKE_P2_DISPLAY_PORT_FAST },
+ .p = { .min = IRONLAKE_DP_P_MIN,
+ .max = IRONLAKE_DP_P_MAX },
+ .p1 = { .min = IRONLAKE_DP_P1_MIN,
+ .max = IRONLAKE_DP_P1_MAX},
+ .p2 = { .dot_limit = IRONLAKE_DP_P2_LIMIT,
+ .p2_slow = IRONLAKE_DP_P2_SLOW,
+ .p2_fast = IRONLAKE_DP_P2_FAST },
.find_pll = intel_find_pll_ironlake_dp,
};
static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc)
{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
const intel_limit_t *limit;
- if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
- limit = &intel_limits_ironlake_lvds;
- else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
+ int refclk = 120;
+
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
+ if (dev_priv->lvds_use_ssc && dev_priv->lvds_ssc_freq == 100)
+ refclk = 100;
+
+ if ((I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) ==
+ LVDS_CLKB_POWER_UP) {
+ /* LVDS dual channel */
+ if (refclk == 100)
+ limit = &intel_limits_ironlake_dual_lvds_100m;
+ else
+ limit = &intel_limits_ironlake_dual_lvds;
+ } else {
+ if (refclk == 100)
+ limit = &intel_limits_ironlake_single_lvds_100m;
+ else
+ limit = &intel_limits_ironlake_single_lvds;
+ }
+ } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
HAS_eDP)
limit = &intel_limits_ironlake_display_port;
else
- limit = &intel_limits_ironlake_sdvo;
+ limit = &intel_limits_ironlake_dac;
return limit;
}
/* enable it... */
fbc_ctl = FBC_CTL_EN | FBC_CTL_PERIODIC;
+ if (IS_I945GM(dev))
+ fbc_ctl |= FBC_C3_IDLE; /* 945 needs special SR handling */
fbc_ctl |= (dev_priv->cfb_pitch & 0xff) << FBC_CTL_STRIDE_SHIFT;
fbc_ctl |= (interval & 0x2fff) << FBC_CTL_INTERVAL_SHIFT;
if (obj_priv->tiling_mode != I915_TILING_NONE)
case DRM_MODE_DPMS_OFF:
DRM_DEBUG_KMS("crtc %d dpms off\n", pipe);
+ drm_vblank_off(dev, pipe);
/* Disable display plane */
temp = I915_READ(dspcntr_reg);
if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
sr_entries = roundup(sr_entries / cacheline_size, 1);
DRM_DEBUG("self-refresh entries: %d\n", sr_entries);
I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN);
+ } else {
+ /* Turn off self refresh if both pipes are enabled */
+ I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF)
+ & ~FW_BLC_SELF_EN);
}
DRM_DEBUG("Setting FIFO watermarks - A: %d, B: %d, SR %d\n",
srwm = 1;
srwm &= 0x3f;
I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN);
+ } else {
+ /* Turn off self refresh if both pipes are enabled */
+ I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF)
+ & ~FW_BLC_SELF_EN);
}
DRM_DEBUG_KMS("Setting FIFO watermarks - A: 8, B: 8, C: 8, SR %d\n",
if (srwm < 0)
srwm = 1;
I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN | (srwm & 0x3f));
+ } else {
+ /* Turn off self refresh if both pipes are enabled */
+ I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF)
+ & ~FW_BLC_SELF_EN);
}
DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d, B: %d, C: %d, SR %d\n",
struct intel_unpin_work {
struct work_struct work;
struct drm_device *dev;
- struct drm_gem_object *obj;
+ struct drm_gem_object *old_fb_obj;
+ struct drm_gem_object *pending_flip_obj;
struct drm_pending_vblank_event *event;
int pending;
};
container_of(__work, struct intel_unpin_work, work);
mutex_lock(&work->dev->struct_mutex);
- i915_gem_object_unpin(work->obj);
- drm_gem_object_unreference(work->obj);
+ i915_gem_object_unpin(work->old_fb_obj);
+ drm_gem_object_unreference(work->pending_flip_obj);
+ drm_gem_object_unreference(work->old_fb_obj);
mutex_unlock(&work->dev->struct_mutex);
kfree(work);
}
spin_lock_irqsave(&dev->event_lock, flags);
work = intel_crtc->unpin_work;
if (work == NULL || !work->pending) {
+ if (work && !work->pending) {
+ obj_priv = work->pending_flip_obj->driver_private;
+ DRM_DEBUG_DRIVER("flip finish: %p (%d) not pending?\n",
+ obj_priv,
+ atomic_read(&obj_priv->pending_flip));
+ }
spin_unlock_irqrestore(&dev->event_lock, flags);
return;
}
spin_unlock_irqrestore(&dev->event_lock, flags);
- obj_priv = work->obj->driver_private;
- if (atomic_dec_and_test(&obj_priv->pending_flip))
+ obj_priv = work->pending_flip_obj->driver_private;
+
+ /* Initial scanout buffer will have a 0 pending flip count */
+ if ((atomic_read(&obj_priv->pending_flip) == 0) ||
+ atomic_dec_and_test(&obj_priv->pending_flip))
DRM_WAKEUP(&dev_priv->pending_flip_queue);
schedule_work(&work->work);
}
unsigned long flags;
spin_lock_irqsave(&dev->event_lock, flags);
- if (intel_crtc->unpin_work)
+ if (intel_crtc->unpin_work) {
intel_crtc->unpin_work->pending = 1;
+ } else {
+ DRM_DEBUG_DRIVER("preparing flip with no unpin work?\n");
+ }
spin_unlock_irqrestore(&dev->event_lock, flags);
}
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_unpin_work *work;
unsigned long flags;
- int ret;
+ int pipesrc_reg = (intel_crtc->pipe == 0) ? PIPEASRC : PIPEBSRC;
+ int ret, pipesrc;
RING_LOCALS;
work = kzalloc(sizeof *work, GFP_KERNEL);
work->event = event;
work->dev = crtc->dev;
intel_fb = to_intel_framebuffer(crtc->fb);
- work->obj = intel_fb->obj;
+ work->old_fb_obj = intel_fb->obj;
INIT_WORK(&work->work, intel_unpin_work_fn);
/* We borrow the event spin lock for protecting unpin_work */
spin_lock_irqsave(&dev->event_lock, flags);
if (intel_crtc->unpin_work) {
+ DRM_DEBUG_DRIVER("flip queue: crtc already busy\n");
spin_unlock_irqrestore(&dev->event_lock, flags);
kfree(work);
mutex_unlock(&dev->struct_mutex);
ret = intel_pin_and_fence_fb_obj(dev, obj);
if (ret != 0) {
+ DRM_DEBUG_DRIVER("flip queue: %p pin & fence failed\n",
+ obj->driver_private);
kfree(work);
+ intel_crtc->unpin_work = NULL;
mutex_unlock(&dev->struct_mutex);
return ret;
}
- /* Reference the old fb object for the scheduled work. */
- drm_gem_object_reference(work->obj);
+ /* Reference the objects for the scheduled work. */
+ drm_gem_object_reference(work->old_fb_obj);
+ drm_gem_object_reference(obj);
crtc->fb = fb;
i915_gem_object_flush_write_domain(obj);
drm_vblank_get(dev, intel_crtc->pipe);
obj_priv = obj->driver_private;
atomic_inc(&obj_priv->pending_flip);
+ work->pending_flip_obj = obj;
BEGIN_LP_RING(4);
OUT_RING(MI_DISPLAY_FLIP |
OUT_RING(fb->pitch);
if (IS_I965G(dev)) {
OUT_RING(obj_priv->gtt_offset | obj_priv->tiling_mode);
- OUT_RING((fb->width << 16) | fb->height);
+ pipesrc = I915_READ(pipesrc_reg);
+ OUT_RING(pipesrc & 0x0fff0fff);
} else {
OUT_RING(obj_priv->gtt_offset);
OUT_RING(MI_NOOP);
mutex_lock(&dev->struct_mutex);
- ret = i915_gem_object_pin(fbo, PAGE_SIZE);
+ ret = i915_gem_object_pin(fbo, 64*1024);
if (ret) {
DRM_ERROR("failed to pin fb: %d\n", ret);
goto out_unref;
{
.ident = "Samsung SX20S",
.matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_SYS_VENDOR, "Samsung Electronics"),
DMI_MATCH(DMI_BOARD_NAME, "SX20S"),
},
},
DMI_MATCH(DMI_PRODUCT_NAME, "Aspire one"),
},
},
+ {
+ .ident = "Aspire 1810T",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 1810T"),
+ },
+ },
{
.ident = "PC-81005",
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "PC-81005"),
},
},
+ {
+ .ident = "Clevo M5x0N",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "CLEVO Co."),
+ DMI_MATCH(DMI_BOARD_NAME, "M5x0N"),
+ },
+ },
{ }
};
{
enum drm_connector_status status = connector_status_connected;
- if (!acpi_lid_open() && !dmi_check_system(bad_lid_status))
+ if (!dmi_check_system(bad_lid_status) && !acpi_lid_open())
status = connector_status_disconnected;
return status;
connector->connector_type = DRM_MODE_CONNECTOR_VGA;
intel_output->clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
(1 << INTEL_ANALOG_CLONE_BIT);
+ } else if (flags & SDVO_OUTPUT_CVBS0) {
+
+ sdvo_priv->controlled_output = SDVO_OUTPUT_CVBS0;
+ encoder->encoder_type = DRM_MODE_ENCODER_TVDAC;
+ connector->connector_type = DRM_MODE_CONNECTOR_SVIDEO;
+ sdvo_priv->is_tv = true;
+ intel_output->needs_tv_clock = true;
+ intel_output->clone_mask = 1 << INTEL_SDVO_TV_CLONE_BIT;
} else if (flags & SDVO_OUTPUT_LVDS0) {
sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS0;
{
int result;
- if (nouveau_dsm(dev, NOUVEAU_DSM_ACTIVE, NOUVEAU_DSM_ACTIVE_QUERY,
+ if (nouveau_dsm(dev, NOUVEAU_DSM_POWER, NOUVEAU_DSM_POWER_STATE,
&result))
return -ENODEV;
NV_INFO(dev, "_DSM hardware status gave 0x%x\n", result);
- if (result & 0x1) { /* Stamina mode - disable the external GPU */
+ if (result) { /* Ensure that the external GPU is enabled */
+ nouveau_dsm(dev, NOUVEAU_DSM_LED, NOUVEAU_DSM_LED_SPEED, NULL);
+ nouveau_dsm(dev, NOUVEAU_DSM_POWER, NOUVEAU_DSM_POWER_SPEED,
+ NULL);
+ } else { /* Stamina mode - disable the external GPU */
nouveau_dsm(dev, NOUVEAU_DSM_LED, NOUVEAU_DSM_LED_STAMINA,
NULL);
nouveau_dsm(dev, NOUVEAU_DSM_POWER, NOUVEAU_DSM_POWER_STAMINA,
NULL);
- } else { /* Ensure that the external GPU is enabled */
- nouveau_dsm(dev, NOUVEAU_DSM_LED, NOUVEAU_DSM_LED_SPEED, NULL);
- nouveau_dsm(dev, NOUVEAU_DSM_POWER, NOUVEAU_DSM_POWER_SPEED,
- NULL);
}
return 0;
struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
- if (dev_priv->card_type >= NV_50)
+ if (dev_priv->card_type >= NV_40)
return 1;
/*
*/
struct drm_nouveau_private *dev_priv = dev->dev_private;
- struct init_exec iexec = {true, false};
struct nvbios *bios = &dev_priv->VBIOS;
uint8_t *table = &bios->data[bios->display.script_table_ptr];
uint8_t *otable = NULL;
}
}
- bios->display.output = dcbent;
-
if (pxclk == 0) {
script = ROM16(otable[6]);
if (!script) {
}
NV_TRACE(dev, "0x%04X: parsing output script 0\n", script);
- parse_init_table(bios, script, &iexec);
+ nouveau_bios_run_init_table(dev, script, dcbent);
} else
if (pxclk == -1) {
script = ROM16(otable[8]);
}
NV_TRACE(dev, "0x%04X: parsing output script 1\n", script);
- parse_init_table(bios, script, &iexec);
+ nouveau_bios_run_init_table(dev, script, dcbent);
} else
if (pxclk == -2) {
if (table[4] >= 12)
}
NV_TRACE(dev, "0x%04X: parsing output script 2\n", script);
- parse_init_table(bios, script, &iexec);
+ nouveau_bios_run_init_table(dev, script, dcbent);
} else
if (pxclk > 0) {
script = ROM16(otable[table[4] + i*6 + 2]);
}
NV_TRACE(dev, "0x%04X: parsing clock script 0\n", script);
- parse_init_table(bios, script, &iexec);
+ nouveau_bios_run_init_table(dev, script, dcbent);
} else
if (pxclk < 0) {
script = ROM16(otable[table[4] + i*6 + 4]);
}
NV_TRACE(dev, "0x%04X: parsing clock script 1\n", script);
- parse_init_table(bios, script, &iexec);
+ nouveau_bios_run_init_table(dev, script, dcbent);
}
return 0;
struct nvbios *bios = &dev_priv->VBIOS;
struct init_exec iexec = { true, false };
+ mutex_lock(&bios->lock);
bios->display.output = dcbent;
parse_init_table(bios, table, &iexec);
bios->display.output = NULL;
+ mutex_unlock(&bios->lock);
}
static bool NVInitVBIOS(struct drm_device *dev)
struct nvbios *bios = &dev_priv->VBIOS;
memset(bios, 0, sizeof(struct nvbios));
+ mutex_init(&bios->lock);
bios->dev = dev;
if (!NVShadowVBIOS(dev, bios->data))
struct drm_device *dev;
struct nouveau_bios_info pub;
+ struct mutex lock;
+
uint8_t data[NV_PROM_SIZE];
unsigned int length;
bool execute;
/*
* Some of the tile_flags have a periodic structure of N*4096 bytes,
- * align to to that as well as the page size. Overallocate memory to
- * avoid corruption of other buffer objects.
+ * align to to that as well as the page size. Align the size to the
+ * appropriate boundaries. This does imply that sizes are rounded up
+ * 3-7 pages, so be aware of this and do not waste memory by allocating
+ * many small buffers.
*/
if (dev_priv->card_type == NV_50) {
uint32_t block_size = nouveau_mem_fb_amount(dev) >> 15;
case 0x2800:
case 0x4800:
case 0x7a00:
- *size = roundup(*size, block_size);
if (is_power_of_2(block_size)) {
- *size += 3 * block_size;
for (i = 1; i < 10; i++) {
*align = 12 * i * block_size;
if (!(*align % 65536))
break;
}
} else {
- *size += 6 * block_size;
for (i = 1; i < 10; i++) {
*align = 8 * i * block_size;
if (!(*align % 65536))
break;
}
}
+ *size = roundup(*size, *align);
break;
default:
break;
/* Ensure the channel is no longer active on the GPU */
pfifo->reassign(dev, false);
- if (pgraph->channel(dev) == chan) {
- pgraph->fifo_access(dev, false);
+ pgraph->fifo_access(dev, false);
+ if (pgraph->channel(dev) == chan)
pgraph->unload_context(dev);
- pgraph->fifo_access(dev, true);
- }
pgraph->destroy_context(chan);
+ pgraph->fifo_access(dev, true);
if (pfifo->channel_id(dev) == chan->id) {
pfifo->disable(dev);
{
struct nouveau_connector *nv_connector =
nouveau_connector(drm_connector);
- struct drm_device *dev = nv_connector->base.dev;
-
- NV_DEBUG_KMS(dev, "\n");
+ struct drm_device *dev;
if (!nv_connector)
return;
+ dev = nv_connector->base.dev;
+ NV_DEBUG_KMS(dev, "\n");
+
kfree(nv_connector->edid);
drm_sysfs_connector_remove(drm_connector);
drm_connector_cleanup(drm_connector);
break;
}
- if ((stat & NV50_AUXCH_STAT_COUNT) != data_nr) {
- ret = -EREMOTEIO;
- goto out;
- }
-
if (cmd & 1) {
+ if ((stat & NV50_AUXCH_STAT_COUNT) != data_nr) {
+ ret = -EREMOTEIO;
+ goto out;
+ }
+
for (i = 0; i < 4; i++) {
data32[i] = nv_rd32(dev, NV50_AUXCH_DATA_IN(index, i));
NV_DEBUG_KMS(dev, "rd %d: 0x%08x\n", i, data32[i]);
module_param_named(vram_pushbuf, nouveau_vram_pushbuf, int, 0400);
MODULE_PARM_DESC(vram_notify, "Force DMA notifiers to be in VRAM");
-int nouveau_vram_notify;
+int nouveau_vram_notify = 1;
module_param_named(vram_notify, nouveau_vram_notify, int, 0400);
MODULE_PARM_DESC(duallink, "Allow dual-link TMDS (>=GeForce 8)");
int nouveau_ignorelid = 0;
module_param_named(ignorelid, nouveau_ignorelid, int, 0400);
+MODULE_PARM_DESC(noagp, "Disable all acceleration");
+int nouveau_noaccel = 0;
+module_param_named(noaccel, nouveau_noaccel, int, 0400);
+
+MODULE_PARM_DESC(noagp, "Disable fbcon acceleration");
+int nouveau_nofbaccel = 0;
+module_param_named(nofbaccel, nouveau_nofbaccel, int, 0400);
+
MODULE_PARM_DESC(tv_norm, "Default TV norm.\n"
"\t\tSupported: PAL, PAL-M, PAL-N, PAL-Nc, NTSC-M, NTSC-J,\n"
"\t\t\thd480i, hd480p, hd576i, hd576p, hd720p, hd1080i.\n"
uint64_t vm_end;
struct nouveau_gpuobj *vm_vram_pt[NV50_VM_VRAM_NR];
int vm_vram_pt_nr;
+ uint64_t vram_sys_base;
/* the mtrr covering the FB */
int fb_mtrr;
extern char *nouveau_vbios;
extern int nouveau_ctxfw;
extern int nouveau_ignorelid;
+extern int nouveau_nofbaccel;
+extern int nouveau_noaccel;
/* nouveau_state.c */
extern void nouveau_preclose(struct drm_device *dev, struct drm_file *);
.fb_setcmap = drm_fb_helper_setcmap,
};
+static struct fb_ops nv04_fbcon_ops = {
+ .owner = THIS_MODULE,
+ .fb_check_var = drm_fb_helper_check_var,
+ .fb_set_par = drm_fb_helper_set_par,
+ .fb_setcolreg = drm_fb_helper_setcolreg,
+ .fb_fillrect = nv04_fbcon_fillrect,
+ .fb_copyarea = nv04_fbcon_copyarea,
+ .fb_imageblit = nv04_fbcon_imageblit,
+ .fb_sync = nouveau_fbcon_sync,
+ .fb_pan_display = drm_fb_helper_pan_display,
+ .fb_blank = drm_fb_helper_blank,
+ .fb_setcmap = drm_fb_helper_setcmap,
+};
+
+static struct fb_ops nv50_fbcon_ops = {
+ .owner = THIS_MODULE,
+ .fb_check_var = drm_fb_helper_check_var,
+ .fb_set_par = drm_fb_helper_set_par,
+ .fb_setcolreg = drm_fb_helper_setcolreg,
+ .fb_fillrect = nv50_fbcon_fillrect,
+ .fb_copyarea = nv50_fbcon_copyarea,
+ .fb_imageblit = nv50_fbcon_imageblit,
+ .fb_sync = nouveau_fbcon_sync,
+ .fb_pan_display = drm_fb_helper_pan_display,
+ .fb_blank = drm_fb_helper_blank,
+ .fb_setcmap = drm_fb_helper_setcmap,
+};
+
static void nouveau_fbcon_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
u16 blue, int regno)
{
dev_priv->fbdev_info = info;
strcpy(info->fix.id, "nouveaufb");
- info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_COPYAREA |
- FBINFO_HWACCEL_FILLRECT | FBINFO_HWACCEL_IMAGEBLIT;
+ if (nouveau_nofbaccel)
+ info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_DISABLED;
+ else
+ info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_COPYAREA |
+ FBINFO_HWACCEL_FILLRECT |
+ FBINFO_HWACCEL_IMAGEBLIT;
info->fbops = &nouveau_fbcon_ops;
info->fix.smem_start = dev->mode_config.fb_base + nvbo->bo.offset -
dev_priv->vm_vram_base;
par->nouveau_fb = nouveau_fb;
par->dev = dev;
- if (dev_priv->channel) {
+ if (dev_priv->channel && !nouveau_nofbaccel) {
switch (dev_priv->card_type) {
case NV_50:
nv50_fbcon_accel_init(info);
+ info->fbops = &nv50_fbcon_ops;
break;
default:
nv04_fbcon_accel_init(info);
+ info->fbops = &nv04_fbcon_ops;
break;
};
}
void nouveau_fbcon_restore(void);
void nouveau_fbcon_zfill(struct drm_device *dev);
+void nv04_fbcon_copyarea(struct fb_info *info, const struct fb_copyarea *region);
+void nv04_fbcon_fillrect(struct fb_info *info, const struct fb_fillrect *rect);
+void nv04_fbcon_imageblit(struct fb_info *info, const struct fb_image *image);
int nv04_fbcon_accel_init(struct fb_info *info);
+void nv50_fbcon_fillrect(struct fb_info *info, const struct fb_fillrect *rect);
+void nv50_fbcon_copyarea(struct fb_info *info, const struct fb_copyarea *region);
+void nv50_fbcon_imageblit(struct fb_info *info, const struct fb_image *image);
int nv50_fbcon_accel_init(struct fb_info *info);
void nouveau_fbcon_gpu_lockup(struct fb_info *info);
}
if (req->flags & NOUVEAU_GEM_CPU_PREP_NOBLOCK) {
+ spin_lock(&nvbo->bo.lock);
ret = ttm_bo_wait(&nvbo->bo, false, false, no_wait);
+ spin_unlock(&nvbo->bo.lock);
} else {
ret = ttm_bo_synccpu_write_grab(&nvbo->bo, no_wait);
if (ret == 0)
}
pgraph->ctxvals = kmalloc(fw->size, GFP_KERNEL);
- if (!pgraph->ctxprog) {
- NV_ERROR(dev, "OOM copying ctxprog\n");
+ if (!pgraph->ctxvals) {
+ NV_ERROR(dev, "OOM copying ctxvals\n");
release_firmware(fw);
nouveau_grctx_fini(dev);
return -ENOMEM;
get + 4);
}
+ if (status & NV_PFIFO_INTR_SEMAPHORE) {
+ uint32_t sem;
+
+ status &= ~NV_PFIFO_INTR_SEMAPHORE;
+ nv_wr32(dev, NV03_PFIFO_INTR_0,
+ NV_PFIFO_INTR_SEMAPHORE);
+
+ sem = nv_rd32(dev, NV10_PFIFO_CACHE1_SEMAPHORE);
+ nv_wr32(dev, NV10_PFIFO_CACHE1_SEMAPHORE, sem | 0x1);
+
+ nv_wr32(dev, NV03_PFIFO_CACHE1_GET, get + 4);
+ nv_wr32(dev, NV04_PFIFO_CACHE1_PULL0, 1);
+ }
+
if (status) {
NV_INFO(dev, "PFIFO_INTR 0x%08x - Ch %d\n",
status, chid);
static void
nv50_pgraph_irq_handler(struct drm_device *dev)
{
- uint32_t status, nsource;
+ uint32_t status;
- status = nv_rd32(dev, NV03_PGRAPH_INTR);
- nsource = nv_rd32(dev, NV03_PGRAPH_NSOURCE);
+ while ((status = nv_rd32(dev, NV03_PGRAPH_INTR))) {
+ uint32_t nsource = nv_rd32(dev, NV03_PGRAPH_NSOURCE);
- if (status & 0x00000001) {
- nouveau_pgraph_intr_notify(dev, nsource);
- status &= ~0x00000001;
- nv_wr32(dev, NV03_PGRAPH_INTR, 0x00000001);
- }
+ if (status & 0x00000001) {
+ nouveau_pgraph_intr_notify(dev, nsource);
+ status &= ~0x00000001;
+ nv_wr32(dev, NV03_PGRAPH_INTR, 0x00000001);
+ }
- if (status & 0x00000010) {
- nouveau_pgraph_intr_error(dev, nsource |
- NV03_PGRAPH_NSOURCE_ILLEGAL_MTHD);
+ if (status & 0x00000010) {
+ nouveau_pgraph_intr_error(dev, nsource |
+ NV03_PGRAPH_NSOURCE_ILLEGAL_MTHD);
- status &= ~0x00000010;
- nv_wr32(dev, NV03_PGRAPH_INTR, 0x00000010);
- }
+ status &= ~0x00000010;
+ nv_wr32(dev, NV03_PGRAPH_INTR, 0x00000010);
+ }
- if (status & 0x00001000) {
- nv_wr32(dev, 0x400500, 0x00000000);
- nv_wr32(dev, NV03_PGRAPH_INTR, NV_PGRAPH_INTR_CONTEXT_SWITCH);
- nv_wr32(dev, NV40_PGRAPH_INTR_EN, nv_rd32(dev,
- NV40_PGRAPH_INTR_EN) & ~NV_PGRAPH_INTR_CONTEXT_SWITCH);
- nv_wr32(dev, 0x400500, 0x00010001);
+ if (status & 0x00001000) {
+ nv_wr32(dev, 0x400500, 0x00000000);
+ nv_wr32(dev, NV03_PGRAPH_INTR,
+ NV_PGRAPH_INTR_CONTEXT_SWITCH);
+ nv_wr32(dev, NV40_PGRAPH_INTR_EN, nv_rd32(dev,
+ NV40_PGRAPH_INTR_EN) &
+ ~NV_PGRAPH_INTR_CONTEXT_SWITCH);
+ nv_wr32(dev, 0x400500, 0x00010001);
- nv50_graph_context_switch(dev);
+ nv50_graph_context_switch(dev);
- status &= ~NV_PGRAPH_INTR_CONTEXT_SWITCH;
- }
+ status &= ~NV_PGRAPH_INTR_CONTEXT_SWITCH;
+ }
- if (status & 0x00100000) {
- nouveau_pgraph_intr_error(dev, nsource |
- NV03_PGRAPH_NSOURCE_DATA_ERROR);
+ if (status & 0x00100000) {
+ nouveau_pgraph_intr_error(dev, nsource |
+ NV03_PGRAPH_NSOURCE_DATA_ERROR);
- status &= ~0x00100000;
- nv_wr32(dev, NV03_PGRAPH_INTR, 0x00100000);
- }
+ status &= ~0x00100000;
+ nv_wr32(dev, NV03_PGRAPH_INTR, 0x00100000);
+ }
- if (status & 0x00200000) {
- int r;
-
- nouveau_pgraph_intr_error(dev, nsource |
- NV03_PGRAPH_NSOURCE_PROTECTION_ERROR);
-
- NV_ERROR(dev, "magic set 1:\n");
- for (r = 0x408900; r <= 0x408910; r += 4)
- NV_ERROR(dev, "\t0x%08x: 0x%08x\n", r, nv_rd32(dev, r));
- nv_wr32(dev, 0x408900, nv_rd32(dev, 0x408904) | 0xc0000000);
- for (r = 0x408e08; r <= 0x408e24; r += 4)
- NV_ERROR(dev, "\t0x%08x: 0x%08x\n", r, nv_rd32(dev, r));
- nv_wr32(dev, 0x408e08, nv_rd32(dev, 0x408e08) | 0xc0000000);
-
- NV_ERROR(dev, "magic set 2:\n");
- for (r = 0x409900; r <= 0x409910; r += 4)
- NV_ERROR(dev, "\t0x%08x: 0x%08x\n", r, nv_rd32(dev, r));
- nv_wr32(dev, 0x409900, nv_rd32(dev, 0x409904) | 0xc0000000);
- for (r = 0x409e08; r <= 0x409e24; r += 4)
- NV_ERROR(dev, "\t0x%08x: 0x%08x\n", r, nv_rd32(dev, r));
- nv_wr32(dev, 0x409e08, nv_rd32(dev, 0x409e08) | 0xc0000000);
-
- status &= ~0x00200000;
- nv_wr32(dev, NV03_PGRAPH_NSOURCE, nsource);
- nv_wr32(dev, NV03_PGRAPH_INTR, 0x00200000);
- }
+ if (status & 0x00200000) {
+ int r;
+
+ nouveau_pgraph_intr_error(dev, nsource |
+ NV03_PGRAPH_NSOURCE_PROTECTION_ERROR);
+
+ NV_ERROR(dev, "magic set 1:\n");
+ for (r = 0x408900; r <= 0x408910; r += 4)
+ NV_ERROR(dev, "\t0x%08x: 0x%08x\n", r,
+ nv_rd32(dev, r));
+ nv_wr32(dev, 0x408900,
+ nv_rd32(dev, 0x408904) | 0xc0000000);
+ for (r = 0x408e08; r <= 0x408e24; r += 4)
+ NV_ERROR(dev, "\t0x%08x: 0x%08x\n", r,
+ nv_rd32(dev, r));
+ nv_wr32(dev, 0x408e08,
+ nv_rd32(dev, 0x408e08) | 0xc0000000);
+
+ NV_ERROR(dev, "magic set 2:\n");
+ for (r = 0x409900; r <= 0x409910; r += 4)
+ NV_ERROR(dev, "\t0x%08x: 0x%08x\n", r,
+ nv_rd32(dev, r));
+ nv_wr32(dev, 0x409900,
+ nv_rd32(dev, 0x409904) | 0xc0000000);
+ for (r = 0x409e08; r <= 0x409e24; r += 4)
+ NV_ERROR(dev, "\t0x%08x: 0x%08x\n", r,
+ nv_rd32(dev, r));
+ nv_wr32(dev, 0x409e08,
+ nv_rd32(dev, 0x409e08) | 0xc0000000);
+
+ status &= ~0x00200000;
+ nv_wr32(dev, NV03_PGRAPH_NSOURCE, nsource);
+ nv_wr32(dev, NV03_PGRAPH_INTR, 0x00200000);
+ }
- if (status) {
- NV_INFO(dev, "Unhandled PGRAPH_INTR - 0x%08x\n", status);
- nv_wr32(dev, NV03_PGRAPH_INTR, status);
- }
+ if (status) {
+ NV_INFO(dev, "Unhandled PGRAPH_INTR - 0x%08x\n",
+ status);
+ nv_wr32(dev, NV03_PGRAPH_INTR, status);
+ }
- {
- const int isb = (1 << 16) | (1 << 0);
+ {
+ const int isb = (1 << 16) | (1 << 0);
- if ((nv_rd32(dev, 0x400500) & isb) != isb)
- nv_wr32(dev, 0x400500, nv_rd32(dev, 0x400500) | isb);
- nv_wr32(dev, 0x400824, nv_rd32(dev, 0x400824) & ~(1 << 31));
+ if ((nv_rd32(dev, 0x400500) & isb) != isb)
+ nv_wr32(dev, 0x400500,
+ nv_rd32(dev, 0x400500) | isb);
+ }
}
nv_wr32(dev, NV03_PMC_INTR_0, NV_PMC_INTR_0_PGRAPH_PENDING);
+ nv_wr32(dev, 0x400824, nv_rd32(dev, 0x400824) & ~(1 << 31));
}
static void
uint32_t flags, uint64_t phys)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
- struct nouveau_gpuobj **pgt;
- unsigned psz, pfl, pages;
-
- if (virt >= dev_priv->vm_gart_base &&
- (virt + size) < (dev_priv->vm_gart_base + dev_priv->vm_gart_size)) {
- psz = 12;
- pgt = &dev_priv->gart_info.sg_ctxdma;
- pfl = 0x21;
- virt -= dev_priv->vm_gart_base;
- } else
- if (virt >= dev_priv->vm_vram_base &&
- (virt + size) < (dev_priv->vm_vram_base + dev_priv->vm_vram_size)) {
- psz = 16;
- pgt = dev_priv->vm_vram_pt;
- pfl = 0x01;
- virt -= dev_priv->vm_vram_base;
- } else {
- NV_ERROR(dev, "Invalid address: 0x%16llx-0x%16llx\n",
- virt, virt + size - 1);
- return -EINVAL;
- }
+ struct nouveau_gpuobj *pgt;
+ unsigned block;
+ int i;
- pages = size >> psz;
+ virt = ((virt - dev_priv->vm_vram_base) >> 16) << 1;
+ size = (size >> 16) << 1;
+
+ phys |= ((uint64_t)flags << 32);
+ phys |= 1;
+ if (dev_priv->vram_sys_base) {
+ phys += dev_priv->vram_sys_base;
+ phys |= 0x30;
+ }
dev_priv->engine.instmem.prepare_access(dev, true);
- if (flags & 0x80000000) {
- while (pages--) {
- struct nouveau_gpuobj *pt = pgt[virt >> 29];
- unsigned pte = ((virt & 0x1fffffffULL) >> psz) << 1;
+ while (size) {
+ unsigned offset_h = upper_32_bits(phys);
+ unsigned offset_l = lower_32_bits(phys);
+ unsigned pte, end;
+
+ for (i = 7; i >= 0; i--) {
+ block = 1 << (i + 1);
+ if (size >= block && !(virt & (block - 1)))
+ break;
+ }
+ offset_l |= (i << 7);
- nv_wo32(dev, pt, pte++, 0x00000000);
- nv_wo32(dev, pt, pte++, 0x00000000);
+ phys += block << 15;
+ size -= block;
- virt += (1 << psz);
- }
- } else {
- while (pages--) {
- struct nouveau_gpuobj *pt = pgt[virt >> 29];
- unsigned pte = ((virt & 0x1fffffffULL) >> psz) << 1;
- unsigned offset_h = upper_32_bits(phys) & 0xff;
- unsigned offset_l = lower_32_bits(phys);
+ while (block) {
+ pgt = dev_priv->vm_vram_pt[virt >> 14];
+ pte = virt & 0x3ffe;
- nv_wo32(dev, pt, pte++, offset_l | pfl);
- nv_wo32(dev, pt, pte++, offset_h | flags);
+ end = pte + block;
+ if (end > 16384)
+ end = 16384;
+ block -= (end - pte);
+ virt += (end - pte);
- phys += (1 << psz);
- virt += (1 << psz);
+ while (pte < end) {
+ nv_wo32(dev, pgt, pte++, offset_l);
+ nv_wo32(dev, pgt, pte++, offset_h);
+ }
}
}
dev_priv->engine.instmem.finish_access(dev);
void
nv50_mem_vm_unbind(struct drm_device *dev, uint64_t virt, uint32_t size)
{
- nv50_mem_vm_bind_linear(dev, virt, size, 0x80000000, 0);
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct nouveau_gpuobj *pgt;
+ unsigned pages, pte, end;
+
+ virt -= dev_priv->vm_vram_base;
+ pages = (size >> 16) << 1;
+
+ dev_priv->engine.instmem.prepare_access(dev, true);
+ while (pages) {
+ pgt = dev_priv->vm_vram_pt[virt >> 29];
+ pte = (virt & 0x1ffe0000ULL) >> 15;
+
+ end = pte + pages;
+ if (end > 16384)
+ end = 16384;
+ pages -= (end - pte);
+ virt += (end - pte) << 15;
+
+ while (pte < end)
+ nv_wo32(dev, pgt, pte++, 0);
+ }
+ dev_priv->engine.instmem.finish_access(dev);
+
+ nv_wr32(dev, 0x100c80, 0x00050001);
+ if (!nv_wait(0x100c80, 0x00000001, 0x00000000)) {
+ NV_ERROR(dev, "timeout: (0x100c80 & 1) == 0 (2)\n");
+ NV_ERROR(dev, "0x100c80 = 0x%08x\n", nv_rd32(dev, 0x100c80));
+ return;
+ }
+
+ nv_wr32(dev, 0x100c80, 0x00000001);
+ if (!nv_wait(0x100c80, 0x00000001, 0x00000000)) {
+ NV_ERROR(dev, "timeout: (0x100c80 & 1) == 0 (2)\n");
+ NV_ERROR(dev, "0x100c80 = 0x%08x\n", nv_rd32(dev, 0x100c80));
+ }
}
/*
{
struct drm_device *dev = chan->dev;
struct nouveau_bo *ntfy = NULL;
+ uint32_t flags;
int ret;
- ret = nouveau_gem_new(dev, NULL, PAGE_SIZE, 0, nouveau_vram_notify ?
- TTM_PL_FLAG_VRAM : TTM_PL_FLAG_TT,
+ if (nouveau_vram_notify)
+ flags = TTM_PL_FLAG_VRAM;
+ else
+ flags = TTM_PL_FLAG_TT;
+
+ ret = nouveau_gem_new(dev, NULL, PAGE_SIZE, 0, flags,
0, 0x0000, false, true, &ntfy);
if (ret)
return ret;
- ret = nouveau_bo_pin(ntfy, TTM_PL_FLAG_VRAM);
+ ret = nouveau_bo_pin(ntfy, flags);
if (ret)
goto out_err;
target = NV_DMA_TARGET_PCI;
} else {
target = NV_DMA_TARGET_AGP;
+ if (dev_priv->card_type >= NV_50)
+ offset += dev_priv->vm_gart_base;
}
} else {
NV_ERROR(dev, "Bad DMA target, mem_type %d!\n",
nouveau_gpuobj_sw_new(struct nouveau_channel *chan, int class,
struct nouveau_gpuobj **gpuobj_ret)
{
- struct drm_nouveau_private *dev_priv = chan->dev->dev_private;
+ struct drm_nouveau_private *dev_priv;
struct nouveau_gpuobj *gpuobj;
if (!chan || !gpuobj_ret || *gpuobj_ret != NULL)
return -EINVAL;
+ dev_priv = chan->dev->dev_private;
gpuobj = kzalloc(sizeof(*gpuobj), GFP_KERNEL);
if (!gpuobj)
* the card will hang early on in the X init process.
*/
# define NV_PMC_ENABLE_UNK13 (1<<13)
+#define NV40_PMC_GRAPH_UNITS 0x00001540
#define NV40_PMC_BACKLIGHT 0x000015f0
# define NV40_PMC_BACKLIGHT_MASK 0x001f0000
#define NV40_PMC_1700 0x00001700
nouveau_sgdma_clear(struct ttm_backend *be)
{
struct nouveau_sgdma_be *nvbe = (struct nouveau_sgdma_be *)be;
- struct drm_device *dev = nvbe->dev;
-
- NV_DEBUG(nvbe->dev, "\n");
+ struct drm_device *dev;
if (nvbe && nvbe->pages) {
+ dev = nvbe->dev;
+ NV_DEBUG(dev, "\n");
+
if (nvbe->bound)
be->func->unbind(be);
static unsigned int
nouveau_vga_set_decode(void *priv, bool state)
{
+ struct drm_device *dev = priv;
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+
+ if (dev_priv->chipset >= 0x40)
+ nv_wr32(dev, 0x88054, state);
+ else
+ nv_wr32(dev, 0x1854, state);
+
if (state)
return VGA_RSRC_LEGACY_IO | VGA_RSRC_LEGACY_MEM |
VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM;
if (ret)
goto out_timer;
- /* PGRAPH */
- ret = engine->graph.init(dev);
- if (ret)
- goto out_fb;
+ if (nouveau_noaccel)
+ engine->graph.accel_blocked = true;
+ else {
+ /* PGRAPH */
+ ret = engine->graph.init(dev);
+ if (ret)
+ goto out_fb;
- /* PFIFO */
- ret = engine->fifo.init(dev);
- if (ret)
- goto out_graph;
+ /* PFIFO */
+ ret = engine->fifo.init(dev);
+ if (ret)
+ goto out_graph;
+ }
/* this call irq_preinstall, register irq handler and
* call irq_postinstall
out_irq:
drm_irq_uninstall(dev);
out_fifo:
- engine->fifo.takedown(dev);
+ if (!nouveau_noaccel)
+ engine->fifo.takedown(dev);
out_graph:
- engine->graph.takedown(dev);
+ if (!nouveau_noaccel)
+ engine->graph.takedown(dev);
out_fb:
engine->fb.takedown(dev);
out_timer:
dev_priv->channel = NULL;
}
- engine->fifo.takedown(dev);
- engine->graph.takedown(dev);
+ if (!nouveau_noaccel) {
+ engine->fifo.takedown(dev);
+ engine->graph.takedown(dev);
+ }
engine->fb.takedown(dev);
engine->timer.takedown(dev);
engine->mc.takedown(dev);
case NOUVEAU_GETPARAM_VM_VRAM_BASE:
getparam->value = dev_priv->vm_vram_base;
break;
+ case NOUVEAU_GETPARAM_GRAPH_UNITS:
+ /* NV40 and NV50 versions are quite different, but register
+ * address is the same. User is supposed to know the card
+ * family anyway... */
+ if (dev_priv->chipset >= 0x40) {
+ getparam->value = nv_rd32(dev, NV40_PMC_GRAPH_UNITS);
+ break;
+ }
+ /* FALLTHRU */
default:
NV_ERROR(dev, "unknown parameter %lld\n", getparam->param);
return -EINVAL;
struct drm_connector *connector)
{
struct drm_device *dev = encoder->dev;
- uint8_t saved_seq1, saved_pi, saved_rpc1;
+ uint8_t saved_seq1, saved_pi, saved_rpc1, saved_cr_mode;
uint8_t saved_palette0[3], saved_palette_mask;
uint32_t saved_rtest_ctrl, saved_rgen_ctrl;
int i;
/* only implemented for head A for now */
NVSetOwner(dev, 0);
+ saved_cr_mode = NVReadVgaCrtc(dev, 0, NV_CIO_CR_MODE_INDEX);
+ NVWriteVgaCrtc(dev, 0, NV_CIO_CR_MODE_INDEX, saved_cr_mode | 0x80);
+
saved_seq1 = NVReadVgaSeq(dev, 0, NV_VIO_SR_CLOCK_INDEX);
NVWriteVgaSeq(dev, 0, NV_VIO_SR_CLOCK_INDEX, saved_seq1 & ~0x20);
NVWriteVgaCrtc(dev, 0, NV_CIO_CRE_PIXEL_INDEX, saved_pi);
NVWriteVgaCrtc(dev, 0, NV_CIO_CRE_RPC1_INDEX, saved_rpc1);
NVWriteVgaSeq(dev, 0, NV_VIO_SR_CLOCK_INDEX, saved_seq1);
+ NVWriteVgaCrtc(dev, 0, NV_CIO_CR_MODE_INDEX, saved_cr_mode);
if (blue == 0x18) {
NV_INFO(dev, "Load detected on head A\n");
#include "nouveau_dma.h"
#include "nouveau_fbcon.h"
-static void
+void
nv04_fbcon_copyarea(struct fb_info *info, const struct fb_copyarea *region)
{
struct nouveau_fbcon_par *par = info->par;
FIRE_RING(chan);
}
-static void
+void
nv04_fbcon_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
{
struct nouveau_fbcon_par *par = info->par;
FIRE_RING(chan);
}
-static void
+void
nv04_fbcon_imageblit(struct fb_info *info, const struct fb_image *image)
{
struct nouveau_fbcon_par *par = info->par;
FIRE_RING(chan);
- info->fbops->fb_fillrect = nv04_fbcon_fillrect;
- info->fbops->fb_copyarea = nv04_fbcon_copyarea;
- info->fbops->fb_imageblit = nv04_fbcon_imageblit;
return 0;
}
nouveau_encoder(encoder)->restore.output);
nv17_tv_state_load(dev, &to_tv_enc(encoder)->saved_state);
+
+ nouveau_encoder(encoder)->last_dpms = NV_DPMS_CLEARED;
}
static int nv17_tv_create_resources(struct drm_encoder *encoder,
static void
nv50_crtc_destroy(struct drm_crtc *crtc)
{
- struct drm_device *dev = crtc->dev;
- struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
-
- NV_DEBUG_KMS(dev, "\n");
+ struct drm_device *dev;
+ struct nouveau_crtc *nv_crtc;
if (!crtc)
return;
+ dev = crtc->dev;
+ nv_crtc = nouveau_crtc(crtc);
+
+ NV_DEBUG_KMS(dev, "\n");
+
drm_crtc_cleanup(&nv_crtc->base);
nv50_cursor_fini(nv_crtc);
#include "nouveau_dma.h"
#include "nouveau_fbcon.h"
-static void
+void
nv50_fbcon_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
{
struct nouveau_fbcon_par *par = info->par;
FIRE_RING(chan);
}
-static void
+void
nv50_fbcon_copyarea(struct fb_info *info, const struct fb_copyarea *region)
{
struct nouveau_fbcon_par *par = info->par;
FIRE_RING(chan);
}
-static void
+void
nv50_fbcon_imageblit(struct fb_info *info, const struct fb_image *image)
{
struct nouveau_fbcon_par *par = info->par;
OUT_RING(chan, info->fix.smem_start - dev_priv->fb_phys +
dev_priv->vm_vram_base);
- info->fbops->fb_fillrect = nv50_fbcon_fillrect;
- info->fbops->fb_copyarea = nv50_fbcon_copyarea;
- info->fbops->fb_imageblit = nv50_fbcon_imageblit;
return 0;
}
nv50_fifo_destroy_context(struct nouveau_channel *chan)
{
struct drm_device *dev = chan->dev;
+ struct nouveau_gpuobj_ref *ramfc = chan->ramfc;
NV_DEBUG(dev, "ch%d\n", chan->id);
- nouveau_gpuobj_ref_del(dev, &chan->ramfc);
- nouveau_gpuobj_ref_del(dev, &chan->cache);
-
+ /* This will ensure the channel is seen as disabled. */
+ chan->ramfc = NULL;
nv50_fifo_channel_disable(dev, chan->id, false);
/* Dummy channel, also used on ch 127 */
if (chan->id == 0)
nv50_fifo_channel_disable(dev, 127, false);
+
+ nouveau_gpuobj_ref_del(dev, &ramfc);
+ nouveau_gpuobj_ref_del(dev, &chan->cache);
}
int
uint32_t inst;
int i;
+ /* Be sure we're not in the middle of a context switch or bad things
+ * will happen, such as unloading the wrong pgraph context.
+ */
+ if (!nv_wait(0x400300, 0x00000001, 0x00000000))
+ NV_ERROR(dev, "Ctxprog is still running\n");
+
inst = nv_rd32(dev, NV50_PGRAPH_CTXCTL_CUR);
if (!(inst & NV50_PGRAPH_CTXCTL_CUR_LOADED))
return NULL;
int
nv50_graph_unload_context(struct drm_device *dev)
{
- uint32_t inst, fifo = nv_rd32(dev, 0x400500);
+ uint32_t inst;
inst = nv_rd32(dev, NV50_PGRAPH_CTXCTL_CUR);
if (!(inst & NV50_PGRAPH_CTXCTL_CUR_LOADED))
inst &= NV50_PGRAPH_CTXCTL_CUR_INSTANCE;
nouveau_wait_for_idle(dev);
- nv_wr32(dev, 0x400500, fifo & ~1);
nv_wr32(dev, 0x400784, inst);
nv_wr32(dev, 0x400824, nv_rd32(dev, 0x400824) | 0x20);
nv_wr32(dev, 0x400304, nv_rd32(dev, 0x400304) | 0x01);
nouveau_wait_for_idle(dev);
- nv_wr32(dev, 0x400500, fifo);
nv_wr32(dev, NV50_PGRAPH_CTXCTL_CUR, inst);
return 0;
for (i = 0x1700; i <= 0x1710; i += 4)
priv->save1700[(i-0x1700)/4] = nv_rd32(dev, i);
+ if (dev_priv->chipset == 0xaa || dev_priv->chipset == 0xac)
+ dev_priv->vram_sys_base = nv_rd32(dev, 0x100e10) << 12;
+ else
+ dev_priv->vram_sys_base = 0;
+
/* Reserve the last MiB of VRAM, we should probably try to avoid
* setting up the below tables over the top of the VBIOS image at
* some point.
* We map the entire fake channel into the start of the PRAMIN BAR
*/
ret = nouveau_gpuobj_new_ref(dev, chan, NULL, 0, pt_size, 0x1000,
- 0, &priv->pramin_pt);
+ 0, &priv->pramin_pt);
if (ret)
return ret;
- for (i = 0, v = c_offset; i < pt_size; i += 8, v += 0x1000) {
- if (v < (c_offset + c_size))
- BAR0_WI32(priv->pramin_pt->gpuobj, i + 0, v | 1);
- else
- BAR0_WI32(priv->pramin_pt->gpuobj, i + 0, 0x00000009);
+ v = c_offset | 1;
+ if (dev_priv->vram_sys_base) {
+ v += dev_priv->vram_sys_base;
+ v |= 0x30;
+ }
+
+ i = 0;
+ while (v < dev_priv->vram_sys_base + c_offset + c_size) {
+ BAR0_WI32(priv->pramin_pt->gpuobj, i + 0, v);
+ BAR0_WI32(priv->pramin_pt->gpuobj, i + 4, 0x00000000);
+ v += 0x1000;
+ i += 8;
+ }
+
+ while (i < pt_size) {
+ BAR0_WI32(priv->pramin_pt->gpuobj, i + 0, 0x00000000);
BAR0_WI32(priv->pramin_pt->gpuobj, i + 4, 0x00000000);
+ i += 8;
}
BAR0_WI32(chan->vm_pd, 0x00, priv->pramin_pt->instance | 0x63);
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nv50_instmem_priv *priv = dev_priv->engine.instmem.priv;
- uint32_t pte, pte_end, vram;
+ struct nouveau_gpuobj *pramin_pt = priv->pramin_pt->gpuobj;
+ uint32_t pte, pte_end;
+ uint64_t vram;
if (!gpuobj->im_backing || !gpuobj->im_pramin || gpuobj->im_bound)
return -EINVAL;
NV_DEBUG(dev, "st=0x%0llx sz=0x%0llx\n",
gpuobj->im_pramin->start, gpuobj->im_pramin->size);
- pte = (gpuobj->im_pramin->start >> 12) << 3;
- pte_end = ((gpuobj->im_pramin->size >> 12) << 3) + pte;
+ pte = (gpuobj->im_pramin->start >> 12) << 1;
+ pte_end = ((gpuobj->im_pramin->size >> 12) << 1) + pte;
vram = gpuobj->im_backing_start;
NV_DEBUG(dev, "pramin=0x%llx, pte=%d, pte_end=%d\n",
gpuobj->im_pramin->start, pte, pte_end);
NV_DEBUG(dev, "first vram page: 0x%08x\n", gpuobj->im_backing_start);
+ vram |= 1;
+ if (dev_priv->vram_sys_base) {
+ vram += dev_priv->vram_sys_base;
+ vram |= 0x30;
+ }
+
dev_priv->engine.instmem.prepare_access(dev, true);
while (pte < pte_end) {
- nv_wo32(dev, priv->pramin_pt->gpuobj, (pte + 0)/4, vram | 1);
- nv_wo32(dev, priv->pramin_pt->gpuobj, (pte + 4)/4, 0x00000000);
-
- pte += 8;
+ nv_wo32(dev, pramin_pt, pte++, lower_32_bits(vram));
+ nv_wo32(dev, pramin_pt, pte++, upper_32_bits(vram));
vram += NV50_INSTMEM_PAGE_SIZE;
}
dev_priv->engine.instmem.finish_access(dev);
if (gpuobj->im_bound == 0)
return -EINVAL;
- pte = (gpuobj->im_pramin->start >> 12) << 3;
- pte_end = ((gpuobj->im_pramin->size >> 12) << 3) + pte;
+ pte = (gpuobj->im_pramin->start >> 12) << 1;
+ pte_end = ((gpuobj->im_pramin->size >> 12) << 1) + pte;
dev_priv->engine.instmem.prepare_access(dev, true);
while (pte < pte_end) {
- nv_wo32(dev, priv->pramin_pt->gpuobj, (pte + 0)/4, 0x00000009);
- nv_wo32(dev, priv->pramin_pt->gpuobj, (pte + 4)/4, 0x00000000);
- pte += 8;
+ nv_wo32(dev, priv->pramin_pt->gpuobj, pte++, 0x00000000);
+ nv_wo32(dev, priv->pramin_pt->gpuobj, pte++, 0x00000000);
}
dev_priv->engine.instmem.finish_access(dev);
struct nouveau_encoder *nvenc = nouveau_encoder(enc);
if (nvenc == nv_encoder ||
+ nvenc->disconnect != nv50_sor_disconnect ||
nvenc->dcb->or != nv_encoder->dcb->or)
continue;
config DRM_RADEON_KMS
- bool "Enable modesetting on radeon by default"
+ bool "Enable modesetting on radeon by default - NEW DRIVER"
depends on DRM_RADEON
help
- Choose this option if you want kernel modesetting enabled by default,
- and you have a new enough userspace to support this. Running old
- userspaces with this enabled will cause pain.
+ Choose this option if you want kernel modesetting enabled by default.
+
+ This is a completely new driver. It's only part of the existing drm
+ for compatibility reasons. It requires an entirely different graphics
+ stack above it and works very differently from the old drm stack.
+ i.e. don't enable this unless you know what you are doing it may
+ cause issues or bugs compared to the previous userspace driver stack.
When kernel modesetting is enabled the IOCTL of radeon/drm
driver are considered as invalid and an error message is printed
#include <linux/module.h>
#include <linux/sched.h>
+#include <asm/unaligned.h>
#define ATOM_DEBUG
case ATOM_ARG_PS:
idx = U8(*ptr);
(*ptr)++;
- val = le32_to_cpu(ctx->ps[idx]);
+ /* get_unaligned_le32 avoids unaligned accesses from atombios
+ * tables, noticed on a DEC Alpha. */
+ val = get_unaligned_le32((u32 *)&ctx->ps[idx]);
if (print)
DEBUG("PS[0x%02X,0x%04X]", idx, val);
break;
uint8_t count = U8((*ptr)++);
SDEBUG(" count: %d\n", count);
if (arg == ATOM_UNIT_MICROSEC)
- schedule_timeout_uninterruptible(usecs_to_jiffies(count));
+ udelay(count);
else
schedule_timeout_uninterruptible(msecs_to_jiffies(count));
}
PROCESS_AUX_CHANNEL_TRANSACTION_PS_ALLOCATION args;
int index = GetIndexIntoMasterTable(COMMAND, ProcessAuxChannelTransaction);
unsigned char *base;
+ int retry_count = 0;
memset(&args, 0, sizeof(args));
base = (unsigned char *)rdev->mode_info.atom_context->scratch;
+retry:
memcpy(base, req_bytes, num_bytes);
args.lpAuxRequest = 0;
atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
- if (args.ucReplyStatus) {
- DRM_DEBUG("failed to get auxch %02x%02x %02x %02x 0x%02x %02x\n",
+ if (args.ucReplyStatus && !args.ucDataOutLen) {
+ if (args.ucReplyStatus == 0x20 && retry_count++ < 10)
+ goto retry;
+ DRM_DEBUG("failed to get auxch %02x%02x %02x %02x 0x%02x %02x after %d retries\n",
req_bytes[1], req_bytes[0], req_bytes[2], req_bytes[3],
- chan->rec.i2c_id, args.ucReplyStatus);
+ chan->rec.i2c_id, args.ucReplyStatus, retry_count);
return false;
}
struct radeon_connector *radeon_connector;
struct radeon_connector_atom_dig *dig_connector;
- if ((connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort) ||
+ if ((connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort) &&
(connector->connector_type != DRM_MODE_CONNECTOR_eDP))
return;
u8 train_set[4];
int i;
- if ((connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort) ||
+ if ((connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort) &&
(connector->connector_type != DRM_MODE_CONNECTOR_eDP))
return;
return;
dig_connector = radeon_connector->con_priv;
- if (ASIC_IS_DCE32(rdev)) {
- if (dig->dig_block)
- enc_id |= ATOM_DP_CONFIG_DIG2_ENCODER;
- else
- enc_id |= ATOM_DP_CONFIG_DIG1_ENCODER;
- if (dig_connector->linkb)
- enc_id |= ATOM_DP_CONFIG_LINK_B;
- else
- enc_id |= ATOM_DP_CONFIG_LINK_A;
- } else {
- if (dig_connector->linkb)
- enc_id |= ATOM_DP_CONFIG_DIG2_ENCODER | ATOM_DP_CONFIG_LINK_B;
- else
- enc_id |= ATOM_DP_CONFIG_DIG1_ENCODER | ATOM_DP_CONFIG_LINK_A;
- }
+ if (dig->dig_encoder)
+ enc_id |= ATOM_DP_CONFIG_DIG2_ENCODER;
+ else
+ enc_id |= ATOM_DP_CONFIG_DIG1_ENCODER;
+ if (dig_connector->linkb)
+ enc_id |= ATOM_DP_CONFIG_LINK_B;
+ else
+ enc_id |= ATOM_DP_CONFIG_LINK_A;
memset(link_configuration, 0, DP_LINK_CONFIGURATION_SIZE);
if (dig_connector->dp_clock == 270000)
return RREG32(RADEON_CRTC2_CRNT_FRAME);
}
+/* Who ever call radeon_fence_emit should call ring_lock and ask
+ * for enough space (today caller are ib schedule and buffer move) */
void r100_fence_ring_emit(struct radeon_device *rdev,
struct radeon_fence *fence)
{
- /* Who ever call radeon_fence_emit should call ring_lock and ask
- * for enough space (today caller are ib schedule and buffer move) */
+ /* We have to make sure that caches are flushed before
+ * CPU might read something from VRAM. */
+ radeon_ring_write(rdev, PACKET0(RADEON_RB3D_DSTCACHE_CTLSTAT, 0));
+ radeon_ring_write(rdev, RADEON_RB3D_DC_FLUSH_ALL);
+ radeon_ring_write(rdev, PACKET0(RADEON_RB3D_ZCACHE_CTLSTAT, 0));
+ radeon_ring_write(rdev, RADEON_RB3D_ZC_FLUSH_ALL);
/* Wait until IDLE & CLEAN */
radeon_ring_write(rdev, PACKET0(0x1720, 0));
radeon_ring_write(rdev, (1 << 16) | (1 << 17));
void r100_fini(struct radeon_device *rdev)
{
- r100_suspend(rdev);
r100_cp_fini(rdev);
r100_wb_fini(rdev);
r100_ib_fini(rdev);
if (r) {
/* Somethings want wront with the accel init stop accel */
dev_err(rdev->dev, "Disabling GPU acceleration\n");
- r100_suspend(rdev);
r100_cp_fini(rdev);
r100_wb_fini(rdev);
r100_ib_fini(rdev);
+ radeon_irq_kms_fini(rdev);
if (rdev->flags & RADEON_IS_PCI)
r100_pci_gart_fini(rdev);
- radeon_irq_kms_fini(rdev);
rdev->accel_working = false;
}
return 0;
/* DDR for all card after R300 & IGP */
rdev->mc.vram_is_ddr = true;
+
tmp = RREG32(RADEON_MEM_CNTL);
- if (tmp & R300_MEM_NUM_CHANNELS_MASK) {
- rdev->mc.vram_width = 128;
- } else {
- rdev->mc.vram_width = 64;
+ tmp &= R300_MEM_NUM_CHANNELS_MASK;
+ switch (tmp) {
+ case 0: rdev->mc.vram_width = 64; break;
+ case 1: rdev->mc.vram_width = 128; break;
+ case 2: rdev->mc.vram_width = 256; break;
+ default: rdev->mc.vram_width = 128; break;
}
r100_vram_init_sizes(rdev);
void r300_fini(struct radeon_device *rdev)
{
- r300_suspend(rdev);
r100_cp_fini(rdev);
r100_wb_fini(rdev);
r100_ib_fini(rdev);
if (r) {
/* Somethings want wront with the accel init stop accel */
dev_err(rdev->dev, "Disabling GPU acceleration\n");
- r300_suspend(rdev);
r100_cp_fini(rdev);
r100_wb_fini(rdev);
r100_ib_fini(rdev);
+ radeon_irq_kms_fini(rdev);
if (rdev->flags & RADEON_IS_PCIE)
rv370_pcie_gart_fini(rdev);
if (rdev->flags & RADEON_IS_PCI)
r100_pci_gart_fini(rdev);
- radeon_irq_kms_fini(rdev);
+ radeon_agp_fini(rdev);
rdev->accel_working = false;
}
return 0;
if (r) {
/* Somethings want wront with the accel init stop accel */
dev_err(rdev->dev, "Disabling GPU acceleration\n");
- r420_suspend(rdev);
r100_cp_fini(rdev);
r100_wb_fini(rdev);
r100_ib_fini(rdev);
+ radeon_irq_kms_fini(rdev);
if (rdev->flags & RADEON_IS_PCIE)
rv370_pcie_gart_fini(rdev);
if (rdev->flags & RADEON_IS_PCI)
r100_pci_gart_fini(rdev);
radeon_agp_fini(rdev);
- radeon_irq_kms_fini(rdev);
rdev->accel_working = false;
}
return 0;
if (r) {
/* Somethings want wront with the accel init stop accel */
dev_err(rdev->dev, "Disabling GPU acceleration\n");
- rv515_suspend(rdev);
r100_cp_fini(rdev);
r100_wb_fini(rdev);
r100_ib_fini(rdev);
+ radeon_irq_kms_fini(rdev);
rv370_pcie_gart_fini(rdev);
radeon_agp_fini(rdev);
- radeon_irq_kms_fini(rdev);
rdev->accel_working = false;
}
return 0;
rdev->cp.align_mask = 16 - 1;
}
+void r600_cp_fini(struct radeon_device *rdev)
+{
+ r600_cp_stop(rdev);
+ radeon_ring_fini(rdev);
+}
+
/*
* GPU scratch registers helpers function.
radeon_ring_write(rdev, RB_INT_STAT);
}
-int r600_copy_dma(struct radeon_device *rdev,
- uint64_t src_offset,
- uint64_t dst_offset,
- unsigned num_pages,
- struct radeon_fence *fence)
-{
- /* FIXME: implement */
- return 0;
-}
-
int r600_copy_blit(struct radeon_device *rdev,
uint64_t src_offset, uint64_t dst_offset,
unsigned num_pages, struct radeon_fence *fence)
{
- r600_blit_prepare_copy(rdev, num_pages * RADEON_GPU_PAGE_SIZE);
+ int r;
+
+ mutex_lock(&rdev->r600_blit.mutex);
+ rdev->r600_blit.vb_ib = NULL;
+ r = r600_blit_prepare_copy(rdev, num_pages * RADEON_GPU_PAGE_SIZE);
+ if (r) {
+ if (rdev->r600_blit.vb_ib)
+ radeon_ib_free(rdev, &rdev->r600_blit.vb_ib);
+ mutex_unlock(&rdev->r600_blit.mutex);
+ return r;
+ }
r600_kms_blit_copy(rdev, src_offset, dst_offset, num_pages * RADEON_GPU_PAGE_SIZE);
r600_blit_done_copy(rdev, fence);
+ mutex_unlock(&rdev->r600_blit.mutex);
return 0;
}
return r;
}
r600_gpu_init(rdev);
-
- if (!rdev->r600_blit.shader_obj) {
- r = r600_blit_init(rdev);
+ r = r600_blit_init(rdev);
+ if (r) {
+ r600_blit_fini(rdev);
+ rdev->asic->copy = NULL;
+ dev_warn(rdev->dev, "failed blitter (%d) falling back to memcpy\n", r);
+ }
+ /* pin copy shader into vram */
+ if (rdev->r600_blit.shader_obj) {
+ r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false);
+ if (unlikely(r != 0))
+ return r;
+ r = radeon_bo_pin(rdev->r600_blit.shader_obj, RADEON_GEM_DOMAIN_VRAM,
+ &rdev->r600_blit.shader_gpu_addr);
+ radeon_bo_unreserve(rdev->r600_blit.shader_obj);
if (r) {
- DRM_ERROR("radeon: failed blitter (%d).\n", r);
+ dev_err(rdev->dev, "(%d) pin blit object failed\n", r);
return r;
}
}
-
- r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false);
- if (unlikely(r != 0))
- return r;
- r = radeon_bo_pin(rdev->r600_blit.shader_obj, RADEON_GEM_DOMAIN_VRAM,
- &rdev->r600_blit.shader_gpu_addr);
- radeon_bo_unreserve(rdev->r600_blit.shader_obj);
- if (r) {
- dev_err(rdev->dev, "(%d) pin blit object failed\n", r);
- return r;
- }
-
/* Enable IRQ */
r = r600_irq_init(rdev);
if (r) {
DRM_ERROR("radeon: failled testing IB (%d).\n", r);
return r;
}
+
+ r = r600_audio_init(rdev);
+ if (r) {
+ DRM_ERROR("radeon: audio resume failed\n");
+ return r;
+ }
+
return r;
}
{
int r;
+ r600_audio_fini(rdev);
/* FIXME: we should wait for ring to be empty */
r600_cp_stop(rdev);
rdev->cp.ready = false;
rdev->accel_working = true;
r = r600_startup(rdev);
if (r) {
- r600_suspend(rdev);
+ dev_err(rdev->dev, "disabling GPU acceleration\n");
+ r600_cp_fini(rdev);
r600_wb_fini(rdev);
- radeon_ring_fini(rdev);
+ r600_irq_fini(rdev);
+ radeon_irq_kms_fini(rdev);
r600_pcie_gart_fini(rdev);
rdev->accel_working = false;
}
void r600_fini(struct radeon_device *rdev)
{
- /* Suspend operations */
- r600_suspend(rdev);
-
r600_audio_fini(rdev);
r600_blit_fini(rdev);
+ r600_cp_fini(rdev);
+ r600_wb_fini(rdev);
r600_irq_fini(rdev);
radeon_irq_kms_fini(rdev);
- radeon_ring_fini(rdev);
- r600_wb_fini(rdev);
r600_pcie_gart_fini(rdev);
+ radeon_agp_fini(rdev);
radeon_gem_fini(rdev);
radeon_fence_driver_fini(rdev);
radeon_clocks_fini(rdev);
- radeon_agp_fini(rdev);
radeon_bo_fini(rdev);
radeon_atombios_fini(rdev);
kfree(rdev->bios);
return 0;
#endif
}
+
+/**
+ * r600_ioctl_wait_idle - flush host path cache on wait idle ioctl
+ * rdev: radeon device structure
+ * bo: buffer object struct which userspace is waiting for idle
+ *
+ * Some R6XX/R7XX doesn't seems to take into account HDP flush performed
+ * through ring buffer, this leads to corruption in rendering, see
+ * http://bugzilla.kernel.org/show_bug.cgi?id=15186 to avoid this we
+ * directly perform HDP flush by writing register through MMIO.
+ */
+void r600_ioctl_wait_idle(struct radeon_device *rdev, struct radeon_bo *bo)
+{
+ WREG32(R_005480_HDP_MEM_COHERENCY_FLUSH_CNTL, 0x1);
+}
*/
static int r600_audio_chipset_supported(struct radeon_device *rdev)
{
- return rdev->family >= CHIP_R600
+ return (rdev->family >= CHIP_R600 && rdev->family < CHIP_RV710)
|| rdev->family == CHIP_RS600
|| rdev->family == CHIP_RS690
|| rdev->family == CHIP_RS740;
if (!r600_audio_chipset_supported(rdev))
return;
- WREG32_P(R600_AUDIO_ENABLE, 0x0, ~0x81000000);
-
del_timer(&rdev->audio_timer);
+ WREG32_P(R600_AUDIO_ENABLE, 0x0, ~0x81000000);
}
u32 packet2s[16];
int num_packet2s = 0;
+ mutex_init(&rdev->r600_blit.mutex);
rdev->r600_blit.state_offset = 0;
if (rdev->family >= CHIP_RV770)
void r600_vb_ib_put(struct radeon_device *rdev)
{
radeon_fence_emit(rdev, rdev->r600_blit.vb_ib->fence);
- mutex_lock(&rdev->ib_pool.mutex);
- list_add_tail(&rdev->r600_blit.vb_ib->list, &rdev->ib_pool.scheduled_ibs);
- mutex_unlock(&rdev->ib_pool.mutex);
radeon_ib_free(rdev, &rdev->r600_blit.vb_ib);
}
int dwords_per_loop = 76, num_loops;
r = r600_vb_ib_get(rdev);
- WARN_ON(r);
+ if (r)
+ return r;
/* set_render_target emits 2 extra dwords on rv6xx */
if (rdev->family > CHIP_R600 && rdev->family < CHIP_RV770)
ring_size += 5; /* done copy */
ring_size += 7; /* fence emit for done copy */
r = radeon_ring_lock(rdev, ring_size);
- WARN_ON(r);
+ if (r)
+ return r;
set_default_state(rdev); /* 14 */
set_shaders(rdev); /* 26 */
gb_tiling_config |= R600_BANK_SWAPS(1);
- backend_map = r700_get_tile_pipe_to_backend_map(dev_priv->r600_max_tile_pipes,
- dev_priv->r600_max_backends,
- (0xff << dev_priv->r600_max_backends) & 0xff);
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV740)
+ backend_map = 0x28;
+ else
+ backend_map = r700_get_tile_pipe_to_backend_map(dev_priv->r600_max_tile_pipes,
+ dev_priv->r600_max_backends,
+ (0xff << dev_priv->r600_max_backends) & 0xff);
gb_tiling_config |= R600_BACKEND_MAP(backend_map);
cc_gc_shader_pipe_config =
* symbol;
*/
#define RADEON_MAX_USEC_TIMEOUT 100000 /* 100 ms */
+/* RADEON_IB_POOL_SIZE must be a power of 2 */
#define RADEON_IB_POOL_SIZE 16
#define RADEON_DEBUGFS_MAX_NUM_FILES 32
#define RADEONFB_CONN_LIMIT 4
*/
struct radeon_ib {
struct list_head list;
- unsigned long idx;
+ unsigned idx;
uint64_t gpu_addr;
struct radeon_fence *fence;
- uint32_t *ptr;
+ uint32_t *ptr;
uint32_t length_dw;
+ bool free;
};
/*
struct radeon_ib_pool {
struct mutex mutex;
struct radeon_bo *robj;
- struct list_head scheduled_ibs;
struct radeon_ib ibs[RADEON_IB_POOL_SIZE];
bool ready;
- DECLARE_BITMAP(alloc_bm, RADEON_IB_POOL_SIZE);
+ unsigned head_id;
};
struct radeon_cp {
};
struct r600_blit {
+ struct mutex mutex;
struct radeon_bo *shader_obj;
u64 shader_gpu_addr;
u32 vs_offset, ps_offset;
void (*hpd_fini)(struct radeon_device *rdev);
bool (*hpd_sense)(struct radeon_device *rdev, enum radeon_hpd_id hpd);
void (*hpd_set_polarity)(struct radeon_device *rdev, enum radeon_hpd_id hpd);
+ /* ioctl hw specific callback. Some hw might want to perform special
+ * operation on specific ioctl. For instance on wait idle some hw
+ * might want to perform and HDP flush through MMIO as it seems that
+ * some R6XX/R7XX hw doesn't take HDP flush into account if programmed
+ * through ring.
+ */
+ void (*ioctl_wait_idle)(struct radeon_device *rdev, struct radeon_bo *bo);
};
/*
extern void r600_cp_stop(struct radeon_device *rdev);
extern void r600_ring_init(struct radeon_device *rdev, unsigned ring_size);
extern int r600_cp_resume(struct radeon_device *rdev);
+extern void r600_cp_fini(struct radeon_device *rdev);
extern int r600_count_pipe_bits(uint32_t val);
extern int r600_gart_clear_page(struct radeon_device *rdev, int i);
extern int r600_mc_wait_for_idle(struct radeon_device *rdev);
bool is_v3;
int ret;
- if (rdev->ddev->agp->agp_info.aper_size < 32) {
- dev_warn(rdev->dev, "AGP aperture to small (%dM) "
- "need at least 32M, disabling AGP\n",
- rdev->ddev->agp->agp_info.aper_size);
- return -EINVAL;
- }
-
/* Acquire AGP. */
if (!rdev->ddev->agp->acquired) {
ret = drm_agp_acquire(rdev->ddev);
ret = drm_agp_info(rdev->ddev, &info);
if (ret) {
+ drm_agp_release(rdev->ddev);
DRM_ERROR("Unable to get AGP info: %d\n", ret);
return ret;
}
+
+ if (rdev->ddev->agp->agp_info.aper_size < 32) {
+ drm_agp_release(rdev->ddev);
+ dev_warn(rdev->dev, "AGP aperture too small (%zuM) "
+ "need at least 32M, disabling AGP\n",
+ rdev->ddev->agp->agp_info.aper_size);
+ return -EINVAL;
+ }
+
mode.mode = info.mode;
agp_status = (RREG32(RADEON_AGP_STATUS) | RADEON_AGPv3_MODE) & mode.mode;
is_v3 = !!(agp_status & RADEON_AGPv3_MODE);
ret = drm_agp_enable(rdev->ddev, mode);
if (ret) {
DRM_ERROR("Unable to enable AGP (mode = 0x%lx)\n", mode.mode);
+ drm_agp_release(rdev->ddev);
return ret;
}
.hpd_fini = &r100_hpd_fini,
.hpd_sense = &r100_hpd_sense,
.hpd_set_polarity = &r100_hpd_set_polarity,
+ .ioctl_wait_idle = NULL,
};
.hpd_fini = &r100_hpd_fini,
.hpd_sense = &r100_hpd_sense,
.hpd_set_polarity = &r100_hpd_set_polarity,
+ .ioctl_wait_idle = NULL,
};
/*
.hpd_fini = &r100_hpd_fini,
.hpd_sense = &r100_hpd_sense,
.hpd_set_polarity = &r100_hpd_set_polarity,
+ .ioctl_wait_idle = NULL,
};
.hpd_fini = &r100_hpd_fini,
.hpd_sense = &r100_hpd_sense,
.hpd_set_polarity = &r100_hpd_set_polarity,
+ .ioctl_wait_idle = NULL,
};
.hpd_fini = &rs600_hpd_fini,
.hpd_sense = &rs600_hpd_sense,
.hpd_set_polarity = &rs600_hpd_set_polarity,
+ .ioctl_wait_idle = NULL,
};
.hpd_fini = &rs600_hpd_fini,
.hpd_sense = &rs600_hpd_sense,
.hpd_set_polarity = &rs600_hpd_set_polarity,
+ .ioctl_wait_idle = NULL,
};
.hpd_fini = &rs600_hpd_fini,
.hpd_sense = &rs600_hpd_sense,
.hpd_set_polarity = &rs600_hpd_set_polarity,
+ .ioctl_wait_idle = NULL,
};
.hpd_fini = &rs600_hpd_fini,
.hpd_sense = &rs600_hpd_sense,
.hpd_set_polarity = &rs600_hpd_set_polarity,
+ .ioctl_wait_idle = NULL,
};
/*
bool r600_hpd_sense(struct radeon_device *rdev, enum radeon_hpd_id hpd);
void r600_hpd_set_polarity(struct radeon_device *rdev,
enum radeon_hpd_id hpd);
+extern void r600_ioctl_wait_idle(struct radeon_device *rdev, struct radeon_bo *bo);
static struct radeon_asic r600_asic = {
.init = &r600_init,
.hpd_fini = &r600_hpd_fini,
.hpd_sense = &r600_hpd_sense,
.hpd_set_polarity = &r600_hpd_set_polarity,
+ .ioctl_wait_idle = r600_ioctl_wait_idle,
};
/*
.hpd_fini = &r600_hpd_fini,
.hpd_sense = &r600_hpd_sense,
.hpd_set_polarity = &r600_hpd_set_polarity,
+ .ioctl_wait_idle = r600_ioctl_wait_idle,
};
#endif
*connector_type = DRM_MODE_CONNECTOR_DVID;
}
+ /* Asrock RS600 board lists the DVI port as HDMI */
+ if ((dev->pdev->device == 0x7941) &&
+ (dev->pdev->subsystem_vendor == 0x1849) &&
+ (dev->pdev->subsystem_device == 0x7941)) {
+ if ((*connector_type == DRM_MODE_CONNECTOR_HDMIA) &&
+ (supported_device == ATOM_DEVICE_DFP3_SUPPORT))
+ *connector_type = DRM_MODE_CONNECTOR_DVID;
+ }
+
/* a-bit f-i90hd - ciaranm on #radeonhd - this board has no DVI */
if ((dev->pdev->device == 0x7941) &&
(dev->pdev->subsystem_vendor == 0x147b) &&
*connector_type = DRM_MODE_CONNECTOR_DVID;
}
+ /* XFX Pine Group device rv730 reports no VGA DDC lines
+ * even though they are wired up to record 0x93
+ */
+ if ((dev->pdev->device == 0x9498) &&
+ (dev->pdev->subsystem_vendor == 0x1682) &&
+ (dev->pdev->subsystem_device == 0x2452)) {
+ struct radeon_device *rdev = dev->dev_private;
+ *i2c_bus = radeon_lookup_i2c_gpio(rdev, 0x93);
+ }
return true;
}
if (r) {
goto out_cleanup;
}
- start_jiffies = jiffies;
- for (i = 0; i < n; i++) {
- r = radeon_fence_create(rdev, &fence);
- if (r) {
- goto out_cleanup;
+
+ /* r100 doesn't have dma engine so skip the test */
+ if (rdev->asic->copy_dma) {
+
+ start_jiffies = jiffies;
+ for (i = 0; i < n; i++) {
+ r = radeon_fence_create(rdev, &fence);
+ if (r) {
+ goto out_cleanup;
+ }
+
+ r = radeon_copy_dma(rdev, saddr, daddr,
+ size / RADEON_GPU_PAGE_SIZE, fence);
+
+ if (r) {
+ goto out_cleanup;
+ }
+ r = radeon_fence_wait(fence, false);
+ if (r) {
+ goto out_cleanup;
+ }
+ radeon_fence_unref(&fence);
}
- r = radeon_copy_dma(rdev, saddr, daddr, size / RADEON_GPU_PAGE_SIZE, fence);
- if (r) {
- goto out_cleanup;
+ end_jiffies = jiffies;
+ time = end_jiffies - start_jiffies;
+ time = jiffies_to_msecs(time);
+ if (time > 0) {
+ i = ((n * size) >> 10) / time;
+ printk(KERN_INFO "radeon: dma %u bo moves of %ukb from"
+ " %d to %d in %lums (%ukb/ms %ukb/s %uM/s)\n",
+ n, size >> 10,
+ sdomain, ddomain, time,
+ i, i * 1000, (i * 1000) / 1024);
}
- r = radeon_fence_wait(fence, false);
- if (r) {
- goto out_cleanup;
- }
- radeon_fence_unref(&fence);
- }
- end_jiffies = jiffies;
- time = end_jiffies - start_jiffies;
- time = jiffies_to_msecs(time);
- if (time > 0) {
- i = ((n * size) >> 10) / time;
- printk(KERN_INFO "radeon: dma %u bo moves of %ukb from %d to %d"
- " in %lums (%ukb/ms %ukb/s %uM/s)\n", n, size >> 10,
- sdomain, ddomain, time, i, i * 1000, (i * 1000) / 1024);
}
+
start_jiffies = jiffies;
for (i = 0; i < n; i++) {
r = radeon_fence_create(rdev, &fence);
lvds->native_mode.vdisplay);
lvds->panel_vcc_delay = RBIOS16(lcd_info + 0x2c);
- if (lvds->panel_vcc_delay > 2000 || lvds->panel_vcc_delay < 0)
- lvds->panel_vcc_delay = 2000;
+ lvds->panel_vcc_delay = min_t(u16, lvds->panel_vcc_delay, 2000);
lvds->panel_pwr_delay = RBIOS8(lcd_info + 0x24);
lvds->panel_digon_delay = RBIOS16(lcd_info + 0x38) & 0xf;
struct radeon_connector *radeon_connector = to_radeon_connector(connector);
struct drm_encoder *encoder;
struct drm_encoder_helper_funcs *encoder_funcs;
- bool dret;
+ bool dret = false;
enum drm_connector_status ret = connector_status_disconnected;
encoder = radeon_best_single_encoder(connector);
if (!encoder)
ret = connector_status_disconnected;
- radeon_i2c_do_lock(radeon_connector->ddc_bus, 1);
- dret = radeon_ddc_probe(radeon_connector);
- radeon_i2c_do_lock(radeon_connector->ddc_bus, 0);
+ if (radeon_connector->ddc_bus) {
+ radeon_i2c_do_lock(radeon_connector->ddc_bus, 1);
+ dret = radeon_ddc_probe(radeon_connector);
+ radeon_i2c_do_lock(radeon_connector->ddc_bus, 0);
+ }
if (dret) {
if (radeon_connector->edid) {
kfree(radeon_connector->edid);
struct drm_mode_object *obj;
int i;
enum drm_connector_status ret = connector_status_disconnected;
- bool dret;
+ bool dret = false;
- radeon_i2c_do_lock(radeon_connector->ddc_bus, 1);
- dret = radeon_ddc_probe(radeon_connector);
- radeon_i2c_do_lock(radeon_connector->ddc_bus, 0);
+ if (radeon_connector->ddc_bus) {
+ radeon_i2c_do_lock(radeon_connector->ddc_bus, 1);
+ dret = radeon_ddc_probe(radeon_connector);
+ radeon_i2c_do_lock(radeon_connector->ddc_bus, 0);
+ }
if (dret) {
if (radeon_connector->edid) {
kfree(radeon_connector->edid);
* connected and the DVI port disconnected. If the edid doesn't
* say HDMI, vice versa.
*/
- if (radeon_connector->shared_ddc && connector_status_connected) {
+ if (radeon_connector->shared_ddc && (ret == connector_status_connected)) {
struct drm_device *dev = connector->dev;
struct drm_connector *list_connector;
struct radeon_connector *list_radeon_connector;
return;
}
if (radeon_connector->ddc_bus && i2c_bus->valid) {
- if (memcmp(&radeon_connector->ddc_bus->rec, i2c_bus,
- sizeof(struct radeon_i2c_bus_rec)) == 0) {
+ if (radeon_connector->ddc_bus->rec.i2c_id == i2c_bus->i2c_id) {
radeon_connector->shared_ddc = true;
shared_ddc = true;
}
radeon_connector->dac_load_detect = false;
drm_connector_attach_property(&radeon_connector->base,
rdev->mode_info.load_detect_property,
- 1);
+ radeon_connector->dac_load_detect);
drm_connector_attach_property(&radeon_connector->base,
rdev->mode_info.tv_std_property,
radeon_combios_get_tv_info(rdev));
&p->validated);
}
}
- return radeon_bo_list_validate(&p->validated, p->ib->fence);
+ return radeon_bo_list_validate(&p->validated);
}
int radeon_cs_parser_init(struct radeon_cs_parser *p, void *data)
{
unsigned i;
- if (error) {
- radeon_bo_list_unvalidate(&parser->validated,
- parser->ib->fence);
- } else {
- radeon_bo_list_unreserve(&parser->validated);
+ if (!error && parser->ib) {
+ radeon_bo_list_fence(&parser->validated, parser->ib->fence);
}
+ radeon_bo_list_unreserve(&parser->validated);
for (i = 0; i < parser->nrelocs; i++) {
if (parser->relocs[i].gobj) {
mutex_lock(&parser->rdev->ddev->struct_mutex);
DRM_INFO(" %s\n", connector_names[connector->connector_type]);
if (radeon_connector->hpd.hpd != RADEON_HPD_NONE)
DRM_INFO(" %s\n", hpd_names[radeon_connector->hpd.hpd]);
- if (radeon_connector->ddc_bus)
+ if (radeon_connector->ddc_bus) {
DRM_INFO(" DDC: 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n",
radeon_connector->ddc_bus->rec.mask_clk_reg,
radeon_connector->ddc_bus->rec.mask_data_reg,
radeon_connector->ddc_bus->rec.en_data_reg,
radeon_connector->ddc_bus->rec.y_clk_reg,
radeon_connector->ddc_bus->rec.y_data_reg);
+ } else {
+ if (connector->connector_type == DRM_MODE_CONNECTOR_VGA ||
+ connector->connector_type == DRM_MODE_CONNECTOR_DVII ||
+ connector->connector_type == DRM_MODE_CONNECTOR_DVID ||
+ connector->connector_type == DRM_MODE_CONNECTOR_DVIA ||
+ connector->connector_type == DRM_MODE_CONNECTOR_HDMIA ||
+ connector->connector_type == DRM_MODE_CONNECTOR_HDMIB)
+ DRM_INFO(" DDC: no ddc bus - possible BIOS bug - please report to xorg-driver-ati@lists.x.org\n");
+ }
DRM_INFO(" Encoders:\n");
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
radeon_encoder = to_radeon_encoder(encoder);
* 1.29- R500 3D cmd buffer support
* 1.30- Add support for occlusion queries
* 1.31- Add support for num Z pipes from GET_PARAM
+ * 1.32- fixes for rv740 setup
*/
#define DRIVER_MAJOR 1
-#define DRIVER_MINOR 31
+#define DRIVER_MINOR 32
#define DRIVER_PATCHLEVEL 0
enum radeon_cp_microcode_version {
return ret;
}
+static inline bool radeon_encoder_is_digital(struct drm_encoder *encoder)
+{
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ switch (radeon_encoder->encoder_id) {
+ case ENCODER_OBJECT_ID_INTERNAL_LVDS:
+ case ENCODER_OBJECT_ID_INTERNAL_TMDS1:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
+ case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
+ case ENCODER_OBJECT_ID_INTERNAL_DVO1:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
+ case ENCODER_OBJECT_ID_INTERNAL_DDI:
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
+ case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
+ return true;
+ default:
+ return false;
+ }
+}
void
radeon_link_encoder_connector(struct drm_device *dev)
{
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
radeon_connector = to_radeon_connector(connector);
- if (radeon_encoder->devices & radeon_connector->devices)
+ if (radeon_encoder->active_device & radeon_connector->devices)
return connector;
}
return NULL;
memset(&args, 0, sizeof(args));
- if (ASIC_IS_DCE32(rdev)) {
- if (dig->dig_block)
- index = GetIndexIntoMasterTable(COMMAND, DIG2EncoderControl);
- else
- index = GetIndexIntoMasterTable(COMMAND, DIG1EncoderControl);
- num = dig->dig_block + 1;
- } else {
- switch (radeon_encoder->encoder_id) {
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
- /* XXX doesn't really matter which dig encoder we pick as long as it's
- * not already in use
- */
- if (dig_connector->linkb)
- index = GetIndexIntoMasterTable(COMMAND, DIG2EncoderControl);
- else
- index = GetIndexIntoMasterTable(COMMAND, DIG1EncoderControl);
- num = 1;
- break;
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
- /* Only dig2 encoder can drive LVTMA */
- index = GetIndexIntoMasterTable(COMMAND, DIG2EncoderControl);
- num = 2;
- break;
- }
- }
+ if (dig->dig_encoder)
+ index = GetIndexIntoMasterTable(COMMAND, DIG2EncoderControl);
+ else
+ index = GetIndexIntoMasterTable(COMMAND, DIG1EncoderControl);
+ num = dig->dig_encoder + 1;
atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev);
args.v1.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
}
if (ASIC_IS_DCE32(rdev)) {
- if (dig->dig_block)
+ if (dig->dig_encoder == 1)
args.v2.acConfig.ucEncoderSel = 1;
if (dig_connector->linkb)
args.v2.acConfig.ucLinkSel = 1;
args.v2.acConfig.fCoherentMode = 1;
}
} else {
+
args.v1.ucConfig = ATOM_TRANSMITTER_CONFIG_CLKSRC_PPLL;
+ if (dig->dig_encoder)
+ args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_DIG2_ENCODER;
+ else
+ args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_DIG1_ENCODER;
+
switch (radeon_encoder->encoder_id) {
case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
- /* XXX doesn't really matter which dig encoder we pick as long as it's
- * not already in use
- */
- if (dig_connector->linkb)
- args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_DIG2_ENCODER;
- else
- args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_DIG1_ENCODER;
if (rdev->flags & RADEON_IS_IGP) {
if (radeon_encoder->pixel_clock > 165000) {
if (dig_connector->igp_lane_info & 0x3)
}
}
break;
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
- /* Only dig2 encoder can drive LVTMA */
- args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_DIG2_ENCODER;
- break;
}
if (radeon_encoder->pixel_clock > 165000)
union crtc_sourc_param args;
int index = GetIndexIntoMasterTable(COMMAND, SelectCRTC_Source);
uint8_t frev, crev;
+ struct radeon_encoder_atom_dig *dig;
memset(&args, 0, sizeof(args));
case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
- if (ASIC_IS_DCE32(rdev)) {
- if (radeon_crtc->crtc_id)
- args.v2.ucEncoderID = ASIC_INT_DIG2_ENCODER_ID;
- else
- args.v2.ucEncoderID = ASIC_INT_DIG1_ENCODER_ID;
- } else {
- struct drm_connector *connector;
- struct radeon_connector *radeon_connector;
- struct radeon_connector_atom_dig *dig_connector;
-
- connector = radeon_get_connector_for_encoder(encoder);
- if (!connector)
- return;
- radeon_connector = to_radeon_connector(connector);
- if (!radeon_connector->con_priv)
- return;
- dig_connector = radeon_connector->con_priv;
-
- /* XXX doesn't really matter which dig encoder we pick as long as it's
- * not already in use
- */
- if (dig_connector->linkb)
- args.v2.ucEncoderID = ASIC_INT_DIG2_ENCODER_ID;
- else
- args.v2.ucEncoderID = ASIC_INT_DIG1_ENCODER_ID;
- }
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
+ dig = radeon_encoder->enc_priv;
+ if (dig->dig_encoder)
+ args.v2.ucEncoderID = ASIC_INT_DIG2_ENCODER_ID;
+ else
+ args.v2.ucEncoderID = ASIC_INT_DIG1_ENCODER_ID;
break;
case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
args.v2.ucEncoderID = ASIC_INT_DVO_ENCODER_ID;
break;
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
- /* Only dig2 encoder can drive LVTMA */
- args.v2.ucEncoderID = ASIC_INT_DIG2_ENCODER_ID;
- break;
case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))
args.v2.ucEncoderID = ASIC_INT_TV_ENCODER_ID;
}
}
+static int radeon_atom_pick_dig_encoder(struct drm_encoder *encoder)
+{
+ struct drm_device *dev = encoder->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ struct drm_encoder *test_encoder;
+ struct radeon_encoder_atom_dig *dig;
+ uint32_t dig_enc_in_use = 0;
+ /* on DCE32 and encoder can driver any block so just crtc id */
+ if (ASIC_IS_DCE32(rdev)) {
+ return radeon_crtc->crtc_id;
+ }
+
+ /* on DCE3 - LVTMA can only be driven by DIGB */
+ list_for_each_entry(test_encoder, &dev->mode_config.encoder_list, head) {
+ struct radeon_encoder *radeon_test_encoder;
+
+ if (encoder == test_encoder)
+ continue;
+
+ if (!radeon_encoder_is_digital(test_encoder))
+ continue;
+
+ radeon_test_encoder = to_radeon_encoder(test_encoder);
+ dig = radeon_test_encoder->enc_priv;
+
+ if (dig->dig_encoder >= 0)
+ dig_enc_in_use |= (1 << dig->dig_encoder);
+ }
+
+ if (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA) {
+ if (dig_enc_in_use & 0x2)
+ DRM_ERROR("LVDS required digital encoder 2 but it was in use - stealing\n");
+ return 1;
+ }
+ if (!(dig_enc_in_use & 1))
+ return 0;
+ return 1;
+}
+
static void
radeon_atom_encoder_mode_set(struct drm_encoder *encoder,
struct drm_display_mode *mode,
if (radeon_encoder->active_device &
(ATOM_DEVICE_DFP_SUPPORT | ATOM_DEVICE_LCD_SUPPORT)) {
- if (radeon_encoder->enc_priv) {
- struct radeon_encoder_atom_dig *dig;
-
- dig = radeon_encoder->enc_priv;
- dig->dig_block = radeon_crtc->crtc_id;
- }
+ struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
+ if (dig)
+ dig->dig_encoder = radeon_atom_pick_dig_encoder(encoder);
}
radeon_encoder->pixel_clock = adjusted_mode->clock;
static void radeon_atom_encoder_disable(struct drm_encoder *encoder)
{
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ struct radeon_encoder_atom_dig *dig;
radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF);
+
+ if (radeon_encoder_is_digital(encoder)) {
+ dig = radeon_encoder->enc_priv;
+ dig->dig_encoder = -1;
+ }
radeon_encoder->active_device = 0;
}
/* coherent mode by default */
dig->coherent_mode = true;
+ dig->dig_encoder = -1;
return dig;
}
if (ret)
goto out_unref;
- memset_io(fbptr, 0xff, aligned_size);
+ memset_io(fbptr, 0x0, aligned_size);
strcpy(info->fix.id, "radeondrmfb");
}
robj = gobj->driver_private;
r = radeon_bo_wait(robj, NULL, false);
+ /* callback hw specific functions if any */
+ if (robj->rdev->asic->ioctl_wait_idle)
+ robj->rdev->asic->ioctl_wait_idle(robj->rdev, robj);
mutex_lock(&dev->struct_mutex);
drm_gem_object_unreference(gobj);
mutex_unlock(&dev->struct_mutex);
struct radeon_encoder_atom_dig {
/* atom dig */
bool coherent_mode;
- int dig_block;
+ int dig_encoder; /* -1 disabled, 0 DIGA, 1 DIGB */
/* atom lvds */
uint32_t lvds_misc;
uint16_t panel_pwr_delay;
}
}
-int radeon_bo_list_validate(struct list_head *head, void *fence)
+int radeon_bo_list_validate(struct list_head *head)
{
struct radeon_bo_list *lobj;
struct radeon_bo *bo;
- struct radeon_fence *old_fence = NULL;
int r;
r = radeon_bo_list_reserve(head);
}
lobj->gpu_offset = radeon_bo_gpu_offset(bo);
lobj->tiling_flags = bo->tiling_flags;
- if (fence) {
- old_fence = (struct radeon_fence *)bo->tbo.sync_obj;
- bo->tbo.sync_obj = radeon_fence_ref(fence);
- bo->tbo.sync_obj_arg = NULL;
- }
- if (old_fence) {
- radeon_fence_unref(&old_fence);
- }
}
return 0;
}
-void radeon_bo_list_unvalidate(struct list_head *head, void *fence)
+void radeon_bo_list_fence(struct list_head *head, void *fence)
{
struct radeon_bo_list *lobj;
- struct radeon_fence *old_fence;
-
- if (fence)
- list_for_each_entry(lobj, head, list) {
- old_fence = to_radeon_fence(lobj->bo->tbo.sync_obj);
- if (old_fence == fence) {
- lobj->bo->tbo.sync_obj = NULL;
- radeon_fence_unref(&old_fence);
- }
+ struct radeon_bo *bo;
+ struct radeon_fence *old_fence = NULL;
+
+ list_for_each_entry(lobj, head, list) {
+ bo = lobj->bo;
+ spin_lock(&bo->tbo.lock);
+ old_fence = (struct radeon_fence *)bo->tbo.sync_obj;
+ bo->tbo.sync_obj = radeon_fence_ref(fence);
+ bo->tbo.sync_obj_arg = NULL;
+ spin_unlock(&bo->tbo.lock);
+ if (old_fence) {
+ radeon_fence_unref(&old_fence);
}
- radeon_bo_list_unreserve(head);
+ }
}
int radeon_bo_fbdev_mmap(struct radeon_bo *bo,
struct list_head *head);
extern int radeon_bo_list_reserve(struct list_head *head);
extern void radeon_bo_list_unreserve(struct list_head *head);
-extern int radeon_bo_list_validate(struct list_head *head, void *fence);
-extern void radeon_bo_list_unvalidate(struct list_head *head, void *fence);
+extern int radeon_bo_list_validate(struct list_head *head);
+extern void radeon_bo_list_fence(struct list_head *head, void *fence);
extern int radeon_bo_fbdev_mmap(struct radeon_bo *bo,
struct vm_area_struct *vma);
extern int radeon_bo_set_tiling_flags(struct radeon_bo *bo,
{
struct radeon_fence *fence;
struct radeon_ib *nib;
- unsigned long i;
- int r = 0;
+ int r = 0, i, c;
*ib = NULL;
r = radeon_fence_create(rdev, &fence);
if (r) {
- DRM_ERROR("failed to create fence for new IB\n");
+ dev_err(rdev->dev, "failed to create fence for new IB\n");
return r;
}
mutex_lock(&rdev->ib_pool.mutex);
- i = find_first_zero_bit(rdev->ib_pool.alloc_bm, RADEON_IB_POOL_SIZE);
- if (i < RADEON_IB_POOL_SIZE) {
- set_bit(i, rdev->ib_pool.alloc_bm);
- rdev->ib_pool.ibs[i].length_dw = 0;
- *ib = &rdev->ib_pool.ibs[i];
- mutex_unlock(&rdev->ib_pool.mutex);
- goto out;
+ for (i = rdev->ib_pool.head_id, c = 0, nib = NULL; c < RADEON_IB_POOL_SIZE; c++, i++) {
+ i &= (RADEON_IB_POOL_SIZE - 1);
+ if (rdev->ib_pool.ibs[i].free) {
+ nib = &rdev->ib_pool.ibs[i];
+ break;
+ }
}
- if (list_empty(&rdev->ib_pool.scheduled_ibs)) {
- /* we go do nothings here */
+ if (nib == NULL) {
+ /* This should never happen, it means we allocated all
+ * IB and haven't scheduled one yet, return EBUSY to
+ * userspace hoping that on ioctl recall we get better
+ * luck
+ */
+ dev_err(rdev->dev, "no free indirect buffer !\n");
mutex_unlock(&rdev->ib_pool.mutex);
- DRM_ERROR("all IB allocated none scheduled.\n");
- r = -EINVAL;
- goto out;
+ radeon_fence_unref(&fence);
+ return -EBUSY;
}
- /* get the first ib on the scheduled list */
- nib = list_entry(rdev->ib_pool.scheduled_ibs.next,
- struct radeon_ib, list);
- if (nib->fence == NULL) {
- /* we go do nothings here */
+ rdev->ib_pool.head_id = (nib->idx + 1) & (RADEON_IB_POOL_SIZE - 1);
+ nib->free = false;
+ if (nib->fence) {
mutex_unlock(&rdev->ib_pool.mutex);
- DRM_ERROR("IB %lu scheduled without a fence.\n", nib->idx);
- r = -EINVAL;
- goto out;
- }
- mutex_unlock(&rdev->ib_pool.mutex);
-
- r = radeon_fence_wait(nib->fence, false);
- if (r) {
- DRM_ERROR("radeon: IB(%lu:0x%016lX:%u)\n", nib->idx,
- (unsigned long)nib->gpu_addr, nib->length_dw);
- DRM_ERROR("radeon: GPU lockup detected, fail to get a IB\n");
- goto out;
+ r = radeon_fence_wait(nib->fence, false);
+ if (r) {
+ dev_err(rdev->dev, "error waiting fence of IB(%u:0x%016lX:%u)\n",
+ nib->idx, (unsigned long)nib->gpu_addr, nib->length_dw);
+ mutex_lock(&rdev->ib_pool.mutex);
+ nib->free = true;
+ mutex_unlock(&rdev->ib_pool.mutex);
+ radeon_fence_unref(&fence);
+ return r;
+ }
+ mutex_lock(&rdev->ib_pool.mutex);
}
radeon_fence_unref(&nib->fence);
-
+ nib->fence = fence;
nib->length_dw = 0;
-
- /* scheduled list is accessed here */
- mutex_lock(&rdev->ib_pool.mutex);
- list_del(&nib->list);
- INIT_LIST_HEAD(&nib->list);
mutex_unlock(&rdev->ib_pool.mutex);
-
*ib = nib;
-out:
- if (r) {
- radeon_fence_unref(&fence);
- } else {
- (*ib)->fence = fence;
- }
- return r;
+ return 0;
}
void radeon_ib_free(struct radeon_device *rdev, struct radeon_ib **ib)
if (tmp == NULL) {
return;
}
- mutex_lock(&rdev->ib_pool.mutex);
- if (!list_empty(&tmp->list) && !radeon_fence_signaled(tmp->fence)) {
- /* IB is scheduled & not signaled don't do anythings */
- mutex_unlock(&rdev->ib_pool.mutex);
- return;
- }
- list_del(&tmp->list);
- INIT_LIST_HEAD(&tmp->list);
- if (tmp->fence)
+ if (!tmp->fence->emited)
radeon_fence_unref(&tmp->fence);
-
- tmp->length_dw = 0;
- clear_bit(tmp->idx, rdev->ib_pool.alloc_bm);
+ mutex_lock(&rdev->ib_pool.mutex);
+ tmp->free = true;
mutex_unlock(&rdev->ib_pool.mutex);
}
if (!ib->length_dw || !rdev->cp.ready) {
/* TODO: Nothings in the ib we should report. */
- DRM_ERROR("radeon: couldn't schedule IB(%lu).\n", ib->idx);
+ DRM_ERROR("radeon: couldn't schedule IB(%u).\n", ib->idx);
return -EINVAL;
}
radeon_ring_ib_execute(rdev, ib);
radeon_fence_emit(rdev, ib->fence);
mutex_lock(&rdev->ib_pool.mutex);
- list_add_tail(&ib->list, &rdev->ib_pool.scheduled_ibs);
+ /* once scheduled IB is considered free and protected by the fence */
+ ib->free = true;
mutex_unlock(&rdev->ib_pool.mutex);
radeon_ring_unlock_commit(rdev);
return 0;
if (rdev->ib_pool.robj)
return 0;
/* Allocate 1M object buffer */
- INIT_LIST_HEAD(&rdev->ib_pool.scheduled_ibs);
r = radeon_bo_create(rdev, NULL, RADEON_IB_POOL_SIZE*64*1024,
true, RADEON_GEM_DOMAIN_GTT,
&rdev->ib_pool.robj);
rdev->ib_pool.ibs[i].ptr = ptr + offset;
rdev->ib_pool.ibs[i].idx = i;
rdev->ib_pool.ibs[i].length_dw = 0;
- INIT_LIST_HEAD(&rdev->ib_pool.ibs[i].list);
+ rdev->ib_pool.ibs[i].free = true;
}
- bitmap_zero(rdev->ib_pool.alloc_bm, RADEON_IB_POOL_SIZE);
+ rdev->ib_pool.head_id = 0;
rdev->ib_pool.ready = true;
DRM_INFO("radeon: ib pool ready.\n");
if (radeon_debugfs_ib_init(rdev)) {
return;
}
mutex_lock(&rdev->ib_pool.mutex);
- bitmap_zero(rdev->ib_pool.alloc_bm, RADEON_IB_POOL_SIZE);
if (rdev->ib_pool.robj) {
r = radeon_bo_reserve(rdev->ib_pool.robj, false);
if (likely(r == 0)) {
if (ib == NULL) {
return 0;
}
- seq_printf(m, "IB %04lu\n", ib->idx);
+ seq_printf(m, "IB %04u\n", ib->idx);
seq_printf(m, "IB fence %p\n", ib->fence);
seq_printf(m, "IB size %05u dwords\n", ib->length_dw);
for (i = 0; i < ib->length_dw; i++) {
return 0;
}
+int rs400_mc_wait_for_idle(struct radeon_device *rdev)
+{
+ unsigned i;
+ uint32_t tmp;
+
+ for (i = 0; i < rdev->usec_timeout; i++) {
+ /* read MC_STATUS */
+ tmp = RREG32(0x0150);
+ if (tmp & (1 << 2)) {
+ return 0;
+ }
+ DRM_UDELAY(1);
+ }
+ return -1;
+}
+
void rs400_gpu_init(struct radeon_device *rdev)
{
/* FIXME: HDP same place on rs400 ? */
r100_hdp_reset(rdev);
/* FIXME: is this correct ? */
r420_pipes_init(rdev);
- if (r300_mc_wait_for_idle(rdev)) {
- printk(KERN_WARNING "Failed to wait MC idle while "
- "programming pipes. Bad things might happen.\n");
+ if (rs400_mc_wait_for_idle(rdev)) {
+ printk(KERN_WARNING "rs400: Failed to wait MC idle while "
+ "programming pipes. Bad things might happen. %08x\n", RREG32(0x150));
}
}
r100_mc_stop(rdev, &save);
/* Wait for mc idle */
- if (r300_mc_wait_for_idle(rdev))
- dev_warn(rdev->dev, "Wait MC idle timeout before updating MC.\n");
+ if (rs400_mc_wait_for_idle(rdev))
+ dev_warn(rdev->dev, "rs400: Wait MC idle timeout before updating MC.\n");
WREG32(R_000148_MC_FB_LOCATION,
S_000148_MC_FB_START(rdev->mc.vram_start >> 16) |
S_000148_MC_FB_TOP(rdev->mc.vram_end >> 16));
void rs400_fini(struct radeon_device *rdev)
{
- rs400_suspend(rdev);
r100_cp_fini(rdev);
r100_wb_fini(rdev);
r100_ib_fini(rdev);
if (r) {
/* Somethings want wront with the accel init stop accel */
dev_err(rdev->dev, "Disabling GPU acceleration\n");
- rs400_suspend(rdev);
r100_cp_fini(rdev);
r100_wb_fini(rdev);
r100_ib_fini(rdev);
void rs600_fini(struct radeon_device *rdev)
{
- rs600_suspend(rdev);
r100_cp_fini(rdev);
r100_wb_fini(rdev);
r100_ib_fini(rdev);
if (r) {
/* Somethings want wront with the accel init stop accel */
dev_err(rdev->dev, "Disabling GPU acceleration\n");
- rs600_suspend(rdev);
r100_cp_fini(rdev);
r100_wb_fini(rdev);
r100_ib_fini(rdev);
void rs690_fini(struct radeon_device *rdev)
{
- rs690_suspend(rdev);
r100_cp_fini(rdev);
r100_wb_fini(rdev);
r100_ib_fini(rdev);
if (r) {
/* Somethings want wront with the accel init stop accel */
dev_err(rdev->dev, "Disabling GPU acceleration\n");
- rs690_suspend(rdev);
r100_cp_fini(rdev);
r100_wb_fini(rdev);
r100_ib_fini(rdev);
void rv515_fini(struct radeon_device *rdev)
{
- rv515_suspend(rdev);
r100_cp_fini(rdev);
r100_wb_fini(rdev);
r100_ib_fini(rdev);
if (r) {
/* Somethings want wront with the accel init stop accel */
dev_err(rdev->dev, "Disabling GPU acceleration\n");
- rv515_suspend(rdev);
r100_cp_fini(rdev);
r100_wb_fini(rdev);
r100_ib_fini(rdev);
+ radeon_irq_kms_fini(rdev);
rv370_pcie_gart_fini(rdev);
radeon_agp_fini(rdev);
- radeon_irq_kms_fini(rdev);
rdev->accel_working = false;
}
return 0;
gb_tiling_config |= BANK_SWAPS(1);
- backend_map = r700_get_tile_pipe_to_backend_map(rdev->config.rv770.max_tile_pipes,
- rdev->config.rv770.max_backends,
- (0xff << rdev->config.rv770.max_backends) & 0xff);
+ if (rdev->family == CHIP_RV740)
+ backend_map = 0x28;
+ else
+ backend_map = r700_get_tile_pipe_to_backend_map(rdev->config.rv770.max_tile_pipes,
+ rdev->config.rv770.max_backends,
+ (0xff << rdev->config.rv770.max_backends) & 0xff);
gb_tiling_config |= BACKEND_MAP(backend_map);
cc_gc_shader_pipe_config =
return r;
}
rv770_gpu_init(rdev);
-
- if (!rdev->r600_blit.shader_obj) {
- r = r600_blit_init(rdev);
+ r = r600_blit_init(rdev);
+ if (r) {
+ r600_blit_fini(rdev);
+ rdev->asic->copy = NULL;
+ dev_warn(rdev->dev, "failed blitter (%d) falling back to memcpy\n", r);
+ }
+ /* pin copy shader into vram */
+ if (rdev->r600_blit.shader_obj) {
+ r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false);
+ if (unlikely(r != 0))
+ return r;
+ r = radeon_bo_pin(rdev->r600_blit.shader_obj, RADEON_GEM_DOMAIN_VRAM,
+ &rdev->r600_blit.shader_gpu_addr);
+ radeon_bo_unreserve(rdev->r600_blit.shader_obj);
if (r) {
- DRM_ERROR("radeon: failed blitter (%d).\n", r);
+ DRM_ERROR("failed to pin blit object %d\n", r);
return r;
}
}
-
- r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false);
- if (unlikely(r != 0))
- return r;
- r = radeon_bo_pin(rdev->r600_blit.shader_obj, RADEON_GEM_DOMAIN_VRAM,
- &rdev->r600_blit.shader_gpu_addr);
- radeon_bo_unreserve(rdev->r600_blit.shader_obj);
- if (r) {
- DRM_ERROR("failed to pin blit object %d\n", r);
- return r;
- }
-
/* Enable IRQ */
r = r600_irq_init(rdev);
if (r) {
rdev->accel_working = true;
r = rv770_startup(rdev);
if (r) {
- rv770_suspend(rdev);
+ dev_err(rdev->dev, "disabling GPU acceleration\n");
+ r600_cp_fini(rdev);
r600_wb_fini(rdev);
- radeon_ring_fini(rdev);
+ r600_irq_fini(rdev);
+ radeon_irq_kms_fini(rdev);
rv770_pcie_gart_fini(rdev);
rdev->accel_working = false;
}
void rv770_fini(struct radeon_device *rdev)
{
- rv770_suspend(rdev);
-
r600_blit_fini(rdev);
+ r600_cp_fini(rdev);
+ r600_wb_fini(rdev);
r600_irq_fini(rdev);
radeon_irq_kms_fini(rdev);
- radeon_ring_fini(rdev);
- r600_wb_fini(rdev);
rv770_pcie_gart_fini(rdev);
radeon_gem_fini(rdev);
radeon_fence_driver_fini(rdev);
struct ttm_mem_reg *mem)
{
int i;
+ struct drm_mm_node *node = mem->mm_node;
+
+ if (node && placement->lpfn != 0 &&
+ (node->start < placement->fpfn ||
+ node->start + node->size > placement->lpfn))
+ return -1;
for (i = 0; i < placement->num_placement; i++) {
if ((placement->placement[i] & mem->placement &
{
struct ttm_tt *ttm = bo->ttm;
struct ttm_mem_reg *old_mem = &bo->mem;
- uint32_t save_flags = old_mem->placement;
int ret;
if (old_mem->mem_type != TTM_PL_SYSTEM) {
ttm_flag_masked(&old_mem->placement, TTM_PL_FLAG_SYSTEM,
TTM_PL_MASK_MEM);
old_mem->mem_type = TTM_PL_SYSTEM;
- save_flags = old_mem->placement;
}
ret = ttm_tt_set_placement_caching(ttm, new_mem->placement);
*old_mem = *new_mem;
new_mem->mm_node = NULL;
- ttm_flag_masked(&save_flags, new_mem->placement, TTM_PL_MASK_MEMTYPE);
+
return 0;
}
EXPORT_SYMBOL(ttm_bo_move_ttm);
void *old_iomap;
void *new_iomap;
int ret;
- uint32_t save_flags = old_mem->placement;
unsigned long i;
unsigned long page;
unsigned long add = 0;
*old_mem = *new_mem;
new_mem->mm_node = NULL;
- ttm_flag_masked(&save_flags, new_mem->placement, TTM_PL_MASK_MEMTYPE);
if ((man->flags & TTM_MEMTYPE_FLAG_FIXED) && (ttm != NULL)) {
ttm_tt_unbind(ttm);
struct ttm_mem_type_manager *man = &bdev->man[new_mem->mem_type];
struct ttm_mem_reg *old_mem = &bo->mem;
int ret;
- uint32_t save_flags = old_mem->placement;
struct ttm_buffer_object *ghost_obj;
void *tmp_obj = NULL;
*old_mem = *new_mem;
new_mem->mm_node = NULL;
- ttm_flag_masked(&save_flags, new_mem->placement, TTM_PL_MASK_MEMTYPE);
+
return 0;
}
EXPORT_SYMBOL(ttm_bo_move_accel_cleanup);
struct drm_hash_item hash;
struct list_head head;
struct kref kref;
- struct ttm_base_object *obj;
enum ttm_ref_type ref_type;
+ struct ttm_base_object *obj;
struct ttm_object_file *tfile;
};
#ifdef CONFIG_X86
static inline int ttm_tt_set_page_caching(struct page *p,
- enum ttm_caching_state c_state)
+ enum ttm_caching_state c_old,
+ enum ttm_caching_state c_new)
{
+ int ret = 0;
+
if (PageHighMem(p))
return 0;
- switch (c_state) {
- case tt_cached:
- return set_pages_wb(p, 1);
- case tt_wc:
- return set_memory_wc((unsigned long) page_address(p), 1);
- default:
- return set_pages_uc(p, 1);
+ if (c_old != tt_cached) {
+ /* p isn't in the default caching state, set it to
+ * writeback first to free its current memtype. */
+
+ ret = set_pages_wb(p, 1);
+ if (ret)
+ return ret;
}
+
+ if (c_new == tt_wc)
+ ret = set_memory_wc((unsigned long) page_address(p), 1);
+ else if (c_new == tt_uncached)
+ ret = set_pages_uc(p, 1);
+
+ return ret;
}
#else /* CONFIG_X86 */
static inline int ttm_tt_set_page_caching(struct page *p,
- enum ttm_caching_state c_state)
+ enum ttm_caching_state c_old,
+ enum ttm_caching_state c_new)
{
return 0;
}
for (i = 0; i < ttm->num_pages; ++i) {
cur_page = ttm->pages[i];
if (likely(cur_page != NULL)) {
- ret = ttm_tt_set_page_caching(cur_page, c_state);
+ ret = ttm_tt_set_page_caching(cur_page,
+ ttm->caching_state,
+ c_state);
if (unlikely(ret != 0))
goto out_err;
}
for (j = 0; j < i; ++j) {
cur_page = ttm->pages[j];
if (likely(cur_page != NULL)) {
- (void)ttm_tt_set_page_caching(cur_page,
+ (void)ttm_tt_set_page_caching(cur_page, c_state,
ttm->caching_state);
}
}
{
struct vmw_private *dev_priv;
int ret;
+ uint32_t svga_id;
dev_priv = kzalloc(sizeof(*dev_priv), GFP_KERNEL);
if (unlikely(dev_priv == NULL)) {
dev_priv->mmio_start = pci_resource_start(dev->pdev, 2);
mutex_lock(&dev_priv->hw_mutex);
+
+ vmw_write(dev_priv, SVGA_REG_ID, SVGA_ID_2);
+ svga_id = vmw_read(dev_priv, SVGA_REG_ID);
+ if (svga_id != SVGA_ID_2) {
+ ret = -ENOSYS;
+ DRM_ERROR("Unsuported SVGA ID 0x%x\n", svga_id);
+ mutex_unlock(&dev_priv->hw_mutex);
+ goto out_err0;
+ }
+
dev_priv->capabilities = vmw_read(dev_priv, SVGA_REG_CAPABILITIES);
if (dev_priv->capabilities & SVGA_CAP_GMR) {
*/
DRM_INFO("It appears like vesafb is loaded. "
- "Ignore above error if any. Entering stealth mode.\n");
+ "Ignore above error if any.\n");
ret = pci_request_region(dev->pdev, 2, "vmwgfx stealth probe");
if (unlikely(ret != 0)) {
DRM_ERROR("Failed reserving the SVGA MMIO resource.\n");
goto out_no_device;
}
- vmw_kms_init(dev_priv);
- vmw_overlay_init(dev_priv);
- } else {
- ret = vmw_request_device(dev_priv);
- if (unlikely(ret != 0))
- goto out_no_device;
- vmw_kms_init(dev_priv);
- vmw_overlay_init(dev_priv);
- vmw_fb_init(dev_priv);
}
+ ret = vmw_request_device(dev_priv);
+ if (unlikely(ret != 0))
+ goto out_no_device;
+ vmw_kms_init(dev_priv);
+ vmw_overlay_init(dev_priv);
+ vmw_fb_init(dev_priv);
dev_priv->pm_nb.notifier_call = vmwgfx_pm_notifier;
register_pm_notifier(&dev_priv->pm_nb);
+ DRM_INFO("%s", vmw_fifo_have_3d(dev_priv) ? "Have 3D\n" : "No 3D\n");
+
return 0;
out_no_device:
unregister_pm_notifier(&dev_priv->pm_nb);
- if (!dev_priv->stealth) {
- vmw_fb_close(dev_priv);
- vmw_kms_close(dev_priv);
- vmw_overlay_close(dev_priv);
- vmw_release_device(dev_priv);
- pci_release_regions(dev->pdev);
- } else {
- vmw_kms_close(dev_priv);
- vmw_overlay_close(dev_priv);
+ vmw_fb_close(dev_priv);
+ vmw_kms_close(dev_priv);
+ vmw_overlay_close(dev_priv);
+ vmw_release_device(dev_priv);
+ if (dev_priv->stealth)
pci_release_region(dev->pdev, 2);
- }
+ else
+ pci_release_regions(dev->pdev);
+
if (dev_priv->capabilities & SVGA_CAP_IRQMASK)
drm_irq_uninstall(dev_priv->dev);
if (dev->devname == vmw_devname)
int ret = 0;
DRM_INFO("Master set.\n");
- if (dev_priv->stealth) {
- ret = vmw_request_device(dev_priv);
- if (unlikely(ret != 0))
- return ret;
- }
if (active) {
BUG_ON(active != &dev_priv->fbdev_master);
ttm_lock_set_kill(&vmaster->lock, true, SIGTERM);
- if (dev_priv->stealth) {
- ret = ttm_bo_evict_mm(&dev_priv->bdev, TTM_PL_VRAM);
- if (unlikely(ret != 0))
- DRM_ERROR("Unable to clean VRAM on master drop.\n");
- vmw_release_device(dev_priv);
- }
dev_priv->active_master = &dev_priv->fbdev_master;
ttm_lock_set_kill(&dev_priv->fbdev_master.lock, false, SIGTERM);
ttm_vt_unlock(&dev_priv->fbdev_master.lock);
- if (!dev_priv->stealth)
- vmw_fb_on(dev_priv);
+ vmw_fb_on(dev_priv);
}
#include "ttm/ttm_execbuf_util.h"
#include "ttm/ttm_module.h"
-#define VMWGFX_DRIVER_DATE "20090724"
-#define VMWGFX_DRIVER_MAJOR 0
-#define VMWGFX_DRIVER_MINOR 1
-#define VMWGFX_DRIVER_PATCHLEVEL 2
+#define VMWGFX_DRIVER_DATE "20100209"
+#define VMWGFX_DRIVER_MAJOR 1
+#define VMWGFX_DRIVER_MINOR 0
+#define VMWGFX_DRIVER_PATCHLEVEL 0
#define VMWGFX_FILE_PAGE_OFFSET 0x00100000
#define VMWGFX_FIFO_STATIC_SIZE (1024*1024)
#define VMWGFX_MAX_RELOCATIONS 2048
struct drm_vmw_size *sizes;
uint32_t num_sizes;
+ bool scanout;
+
/* TODO so far just a extra pointer */
struct vmw_cursor_snooper snooper;
};
unsigned long static_buffer_size;
bool using_bounce_buffer;
uint32_t capabilities;
+ struct mutex fifo_mutex;
struct rw_semaphore rwsem;
};
* Fencing and IRQs.
*/
- uint32_t fence_seq;
+ atomic_t fence_seq;
wait_queue_head_t fence_queue;
wait_queue_head_t fifo_queue;
atomic_t fence_queue_waiters;
uint32_t *sequence);
extern void vmw_fifo_ping_host(struct vmw_private *dev_priv, uint32_t reason);
extern int vmw_fifo_mmap(struct file *filp, struct vm_area_struct *vma);
+extern bool vmw_fifo_have_3d(struct vmw_private *dev_priv);
/**
* TTM glue - vmwgfx_ttm_glue.c
return vmw_cmd_sid_check(dev_priv, sw_context, &cmd->body.sid);
}
-static int vmw_cmd_dma(struct vmw_private *dev_priv,
- struct vmw_sw_context *sw_context,
- SVGA3dCmdHeader *header)
+static int vmw_translate_guest_ptr(struct vmw_private *dev_priv,
+ struct vmw_sw_context *sw_context,
+ SVGAGuestPtr *ptr,
+ struct vmw_dma_buffer **vmw_bo_p)
{
- uint32_t handle;
struct vmw_dma_buffer *vmw_bo = NULL;
struct ttm_buffer_object *bo;
- struct vmw_surface *srf = NULL;
- struct vmw_dma_cmd {
- SVGA3dCmdHeader header;
- SVGA3dCmdSurfaceDMA dma;
- } *cmd;
+ uint32_t handle = ptr->gmrId;
struct vmw_relocation *reloc;
- int ret;
uint32_t cur_validate_node;
struct ttm_validate_buffer *val_buf;
+ int ret;
- cmd = container_of(header, struct vmw_dma_cmd, header);
- handle = cmd->dma.guest.ptr.gmrId;
ret = vmw_user_dmabuf_lookup(sw_context->tfile, handle, &vmw_bo);
if (unlikely(ret != 0)) {
DRM_ERROR("Could not find or use GMR region.\n");
bo = &vmw_bo->base;
if (unlikely(sw_context->cur_reloc >= VMWGFX_MAX_RELOCATIONS)) {
- DRM_ERROR("Max number of DMA commands per submission"
+ DRM_ERROR("Max number relocations per submission"
" exceeded\n");
ret = -EINVAL;
goto out_no_reloc;
}
reloc = &sw_context->relocs[sw_context->cur_reloc++];
- reloc->location = &cmd->dma.guest.ptr;
+ reloc->location = ptr;
cur_validate_node = vmw_dmabuf_validate_node(bo, sw_context->cur_val_buf);
if (unlikely(cur_validate_node >= VMWGFX_MAX_GMRS)) {
list_add_tail(&val_buf->head, &sw_context->validate_nodes);
++sw_context->cur_val_buf;
}
+ *vmw_bo_p = vmw_bo;
+ return 0;
+
+out_no_reloc:
+ vmw_dmabuf_unreference(&vmw_bo);
+ vmw_bo_p = NULL;
+ return ret;
+}
+
+static int vmw_cmd_end_query(struct vmw_private *dev_priv,
+ struct vmw_sw_context *sw_context,
+ SVGA3dCmdHeader *header)
+{
+ struct vmw_dma_buffer *vmw_bo;
+ struct vmw_query_cmd {
+ SVGA3dCmdHeader header;
+ SVGA3dCmdEndQuery q;
+ } *cmd;
+ int ret;
+
+ cmd = container_of(header, struct vmw_query_cmd, header);
+ ret = vmw_cmd_cid_check(dev_priv, sw_context, header);
+ if (unlikely(ret != 0))
+ return ret;
+
+ ret = vmw_translate_guest_ptr(dev_priv, sw_context,
+ &cmd->q.guestResult,
+ &vmw_bo);
+ if (unlikely(ret != 0))
+ return ret;
+
+ vmw_dmabuf_unreference(&vmw_bo);
+ return 0;
+}
+static int vmw_cmd_wait_query(struct vmw_private *dev_priv,
+ struct vmw_sw_context *sw_context,
+ SVGA3dCmdHeader *header)
+{
+ struct vmw_dma_buffer *vmw_bo;
+ struct vmw_query_cmd {
+ SVGA3dCmdHeader header;
+ SVGA3dCmdWaitForQuery q;
+ } *cmd;
+ int ret;
+
+ cmd = container_of(header, struct vmw_query_cmd, header);
+ ret = vmw_cmd_cid_check(dev_priv, sw_context, header);
+ if (unlikely(ret != 0))
+ return ret;
+
+ ret = vmw_translate_guest_ptr(dev_priv, sw_context,
+ &cmd->q.guestResult,
+ &vmw_bo);
+ if (unlikely(ret != 0))
+ return ret;
+
+ vmw_dmabuf_unreference(&vmw_bo);
+ return 0;
+}
+
+
+static int vmw_cmd_dma(struct vmw_private *dev_priv,
+ struct vmw_sw_context *sw_context,
+ SVGA3dCmdHeader *header)
+{
+ struct vmw_dma_buffer *vmw_bo = NULL;
+ struct ttm_buffer_object *bo;
+ struct vmw_surface *srf = NULL;
+ struct vmw_dma_cmd {
+ SVGA3dCmdHeader header;
+ SVGA3dCmdSurfaceDMA dma;
+ } *cmd;
+ int ret;
+
+ cmd = container_of(header, struct vmw_dma_cmd, header);
+ ret = vmw_translate_guest_ptr(dev_priv, sw_context,
+ &cmd->dma.guest.ptr,
+ &vmw_bo);
+ if (unlikely(ret != 0))
+ return ret;
+
+ bo = &vmw_bo->base;
ret = vmw_user_surface_lookup_handle(dev_priv, sw_context->tfile,
cmd->dma.host.sid, &srf);
if (ret) {
VMW_CMD_DEF(SVGA_3D_CMD_DRAW_PRIMITIVES, &vmw_cmd_draw),
VMW_CMD_DEF(SVGA_3D_CMD_SETSCISSORRECT, &vmw_cmd_cid_check),
VMW_CMD_DEF(SVGA_3D_CMD_BEGIN_QUERY, &vmw_cmd_cid_check),
- VMW_CMD_DEF(SVGA_3D_CMD_END_QUERY, &vmw_cmd_cid_check),
- VMW_CMD_DEF(SVGA_3D_CMD_WAIT_FOR_QUERY, &vmw_cmd_cid_check),
+ VMW_CMD_DEF(SVGA_3D_CMD_END_QUERY, &vmw_cmd_end_query),
+ VMW_CMD_DEF(SVGA_3D_CMD_WAIT_FOR_QUERY, &vmw_cmd_wait_query),
VMW_CMD_DEF(SVGA_3D_CMD_PRESENT_READBACK, &vmw_cmd_ok),
VMW_CMD_DEF(SVGA_3D_CMD_BLIT_SURFACE_TO_SCREEN,
&vmw_cmd_blt_surf_screen_check)
info->pixmap.scan_align = 1;
#endif
+ info->aperture_base = vmw_priv->vram_start;
+ info->aperture_size = vmw_priv->vram_size;
+
/*
* Dirty & Deferred IO
*/
#include "drmP.h"
#include "ttm/ttm_placement.h"
+bool vmw_fifo_have_3d(struct vmw_private *dev_priv)
+{
+ __le32 __iomem *fifo_mem = dev_priv->mmio_virt;
+ uint32_t fifo_min, hwversion;
+
+ fifo_min = ioread32(fifo_mem + SVGA_FIFO_MIN);
+ if (fifo_min <= SVGA_FIFO_3D_HWVERSION * sizeof(unsigned int))
+ return false;
+
+ hwversion = ioread32(fifo_mem + SVGA_FIFO_3D_HWVERSION);
+ if (hwversion == 0)
+ return false;
+
+ if (hwversion < SVGA3D_HWVERSION_WS65_B1)
+ return false;
+
+ return true;
+}
+
int vmw_fifo_init(struct vmw_private *dev_priv, struct vmw_fifo_state *fifo)
{
__le32 __iomem *fifo_mem = dev_priv->mmio_virt;
fifo->reserved_size = 0;
fifo->using_bounce_buffer = false;
+ mutex_init(&fifo->fifo_mutex);
init_rwsem(&fifo->rwsem);
/*
(unsigned int) min,
(unsigned int) fifo->capabilities);
- dev_priv->fence_seq = dev_priv->last_read_sequence;
+ atomic_set(&dev_priv->fence_seq, dev_priv->last_read_sequence);
iowrite32(dev_priv->last_read_sequence, fifo_mem + SVGA_FIFO_FENCE);
return vmw_fifo_send_fence(dev_priv, &dummy);
uint32_t reserveable = fifo_state->capabilities & SVGA_FIFO_CAP_RESERVE;
int ret;
- down_write(&fifo_state->rwsem);
+ mutex_lock(&fifo_state->fifo_mutex);
max = ioread32(fifo_mem + SVGA_FIFO_MAX);
min = ioread32(fifo_mem + SVGA_FIFO_MIN);
next_cmd = ioread32(fifo_mem + SVGA_FIFO_NEXT_CMD);
}
out_err:
fifo_state->reserved_size = 0;
- up_write(&fifo_state->rwsem);
+ mutex_unlock(&fifo_state->fifo_mutex);
return NULL;
}
}
+ down_write(&fifo_state->rwsem);
if (fifo_state->using_bounce_buffer || reserveable) {
next_cmd += bytes;
if (next_cmd >= max)
if (reserveable)
iowrite32(0, fifo_mem + SVGA_FIFO_RESERVED);
mb();
- vmw_fifo_ping_host(dev_priv, SVGA_SYNC_GENERIC);
up_write(&fifo_state->rwsem);
+ vmw_fifo_ping_host(dev_priv, SVGA_SYNC_GENERIC);
+ mutex_unlock(&fifo_state->fifo_mutex);
}
int vmw_fifo_send_fence(struct vmw_private *dev_priv, uint32_t *sequence)
fm = vmw_fifo_reserve(dev_priv, bytes);
if (unlikely(fm == NULL)) {
- down_write(&fifo_state->rwsem);
- *sequence = dev_priv->fence_seq;
- up_write(&fifo_state->rwsem);
+ *sequence = atomic_read(&dev_priv->fence_seq);
ret = -ENOMEM;
(void)vmw_fallback_wait(dev_priv, false, true, *sequence,
false, 3*HZ);
}
do {
- *sequence = dev_priv->fence_seq++;
+ *sequence = atomic_add_return(1, &dev_priv->fence_seq);
} while (*sequence == 0);
if (!(fifo_state->capabilities & SVGA_FIFO_CAP_FENCE)) {
param->value = vmw_overlay_num_free_overlays(dev_priv);
break;
case DRM_VMW_PARAM_3D:
- param->value = dev_priv->capabilities & SVGA_CAP_3D ? 1 : 0;
+ param->value = vmw_fifo_have_3d(dev_priv) ? 1 : 0;
break;
case DRM_VMW_PARAM_FIFO_OFFSET:
param->value = dev_priv->mmio_start;
break;
+ case DRM_VMW_PARAM_HW_CAPS:
+ param->value = dev_priv->capabilities;
+ break;
+ case DRM_VMW_PARAM_FIFO_CAPS:
+ param->value = dev_priv->fifo.capabilities;
+ break;
default:
DRM_ERROR("Illegal vmwgfx get param request: %d\n",
param->param);
vmw_fifo_idle(dev_priv, sequence))
return true;
- /**
- * Below is to signal stale fences that have wrapped.
- * First, block fence submission.
- */
-
- down_read(&fifo_state->rwsem);
-
/**
* Then check if the sequence is higher than what we've actually
* emitted. Then the fence is stale and signaled.
*/
- ret = ((dev_priv->fence_seq - sequence) > VMW_FENCE_WRAP);
- up_read(&fifo_state->rwsem);
+ ret = ((atomic_read(&dev_priv->fence_seq) - sequence)
+ > VMW_FENCE_WRAP);
return ret;
}
if (fifo_idle)
down_read(&fifo_state->rwsem);
- signal_seq = dev_priv->fence_seq;
+ signal_seq = atomic_read(&dev_priv->fence_seq);
ret = 0;
for (;;) {
if (ret)
goto try_dmabuf;
+ if (!surface->scanout)
+ goto err_not_scanout;
+
ret = vmw_kms_new_framebuffer_surface(dev_priv, surface, &vfb,
mode_cmd->width, mode_cmd->height);
}
return &vfb->base;
+
+err_not_scanout:
+ DRM_ERROR("surface not marked as scanout\n");
+ /* vmw_user_surface_lookup takes one ref */
+ vmw_surface_unreference(&surface);
+
+ return NULL;
}
static int vmw_kms_fb_changed(struct drm_device *dev)
drm_mode_config_init(dev);
dev->mode_config.funcs = &vmw_kms_funcs;
- dev->mode_config.min_width = 640;
- dev->mode_config.min_height = 480;
- dev->mode_config.max_width = 2048;
- dev->mode_config.max_height = 2048;
+ dev->mode_config.min_width = 1;
+ dev->mode_config.min_height = 1;
+ dev->mode_config.max_width = dev_priv->fb_max_width;
+ dev->mode_config.max_height = dev_priv->fb_max_height;
ret = vmw_kms_init_legacy_display_system(dev_priv);
srf->flags = req->flags;
srf->format = req->format;
+ srf->scanout = req->scanout;
memcpy(srf->mip_levels, req->mip_levels, sizeof(srf->mip_levels));
srf->num_sizes = 0;
for (i = 0; i < DRM_VMW_MAX_SURFACE_FACES; ++i)
if (unlikely(ret != 0))
goto out_err1;
-
- if (srf->flags & (1 << 9) &&
+ if (srf->scanout &&
srf->num_sizes == 1 &&
srf->sizes[0].width == 64 &&
srf->sizes[0].height == 64 &&
remaining -= 7;
pr_devel("client 0x%p called 'target'\n", priv);
/* if target is default */
- if (!strncmp(buf, "default", 7))
+ if (!strncmp(curr_pos, "default", 7))
pdev = pci_dev_get(vga_default_device());
else {
if (!vga_pci_str_to_vars(curr_pos, remaining,
menu "Special HID drivers"
depends on HID
+config HID_3M_PCT
+ tristate "3M PCT"
+ depends on USB_HID
+ ---help---
+ Support for 3M PCT touch screens.
+
config HID_A4TECH
tristate "A4 tech" if EMBEDDED
depends on USB_HID
Say Y here if you want to enable force feedback support for Logitech
Rumblepad 2 devices.
+config LOGIG940_FF
+ bool "Logitech Flight System G940 force feedback support"
+ depends on HID_LOGITECH
+ select INPUT_FF_MEMLESS
+ help
+ Say Y here if you want to enable force feedback support for Logitech
+ Flight System G940 devices.
+
+config HID_MAGICMOUSE
+ tristate "Apple MagicMouse multi-touch support"
+ depends on BT_HIDP
+ ---help---
+ Support for the Apple Magic Mouse multi-touch.
+
+ Say Y here if you want support for the multi-touch features of the
+ Apple Wireless "Magic" Mouse.
+
config HID_MICROSOFT
tristate "Microsoft" if EMBEDDED
depends on USB_HID
---help---
Support for Microsoft devices that are not fully compliant with HID standard.
+config HID_MOSART
+ tristate "MosArt"
+ depends on USB_HID
+ ---help---
+ Support for MosArt dual-touch panels.
+
config HID_MONTEREY
tristate "Monterey" if EMBEDDED
depends on USB_HID
Support for Monterey Genius KB29E.
config HID_NTRIG
- tristate "NTrig" if EMBEDDED
+ tristate "NTrig"
depends on USB_HID
- default !EMBEDDED
---help---
Support for N-Trig touch screen.
+config HID_ORTEK
+ tristate "Ortek" if EMBEDDED
+ depends on USB_HID
+ default !EMBEDDED
+ ---help---
+ Support for Ortek WKB-2000 wireless keyboard + mouse trackpad.
+
config HID_PANTHERLORD
tristate "Pantherlord support" if EMBEDDED
depends on USB_HID
---help---
Support for Petalynx Maxter remote control.
+config HID_QUANTA
+ tristate "Quanta Optical Touch"
+ depends on USB_HID
+ ---help---
+ Support for Quanta Optical Touch dual-touch panels.
+
config HID_SAMSUNG
tristate "Samsung" if EMBEDDED
depends on USB_HID
---help---
Support for Sony PS3 controller.
+config HID_STANTUM
+ tristate "Stantum"
+ depends on USB_HID
+ ---help---
+ Support for Stantum multitouch panel.
+
config HID_SUNPLUS
tristate "Sunplus" if EMBEDDED
depends on USB_HID
Rumble Force or Force Feedback Wheel.
config HID_WACOM
- tristate "Wacom Bluetooth devices support" if EMBEDDED
+ tristate "Wacom Bluetooth devices support"
depends on BT_HIDP
- default !EMBEDDED
---help---
Support for Wacom Graphire Bluetooth tablet.
ifdef CONFIG_LOGIRUMBLEPAD2_FF
hid-logitech-objs += hid-lg2ff.o
endif
+ifdef CONFIG_LOGIG940_FF
+ hid-logitech-objs += hid-lg3ff.o
+endif
+obj-$(CONFIG_HID_3M_PCT) += hid-3m-pct.o
obj-$(CONFIG_HID_A4TECH) += hid-a4tech.o
obj-$(CONFIG_HID_APPLE) += hid-apple.o
obj-$(CONFIG_HID_BELKIN) += hid-belkin.o
obj-$(CONFIG_HID_KENSINGTON) += hid-kensington.o
obj-$(CONFIG_HID_KYE) += hid-kye.o
obj-$(CONFIG_HID_LOGITECH) += hid-logitech.o
+obj-$(CONFIG_HID_MAGICMOUSE) += hid-magicmouse.o
obj-$(CONFIG_HID_MICROSOFT) += hid-microsoft.o
obj-$(CONFIG_HID_MONTEREY) += hid-monterey.o
+obj-$(CONFIG_HID_MOSART) += hid-mosart.o
obj-$(CONFIG_HID_NTRIG) += hid-ntrig.o
+obj-$(CONFIG_HID_ORTEK) += hid-ortek.o
+obj-$(CONFIG_HID_QUANTA) += hid-quanta.o
obj-$(CONFIG_HID_PANTHERLORD) += hid-pl.o
obj-$(CONFIG_HID_PETALYNX) += hid-petalynx.o
obj-$(CONFIG_HID_SAMSUNG) += hid-samsung.o
obj-$(CONFIG_HID_SMARTJOYPLUS) += hid-sjoy.o
obj-$(CONFIG_HID_SONY) += hid-sony.o
+obj-$(CONFIG_HID_STANTUM) += hid-stantum.o
obj-$(CONFIG_HID_SUNPLUS) += hid-sunplus.o
obj-$(CONFIG_HID_GREENASIA) += hid-gaff.o
obj-$(CONFIG_HID_THRUSTMASTER) += hid-tmff.o
--- /dev/null
+/*
+ * HID driver for 3M PCT multitouch panels
+ *
+ * Copyright (c) 2009 Stephane Chatty <chatty@enac.fr>
+ *
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+
+MODULE_AUTHOR("Stephane Chatty <chatty@enac.fr>");
+MODULE_DESCRIPTION("3M PCT multitouch panels");
+MODULE_LICENSE("GPL");
+
+#include "hid-ids.h"
+
+struct mmm_finger {
+ __s32 x, y;
+ __u8 rank;
+ bool touch, valid;
+};
+
+struct mmm_data {
+ struct mmm_finger f[10];
+ __u8 curid, num;
+ bool touch, valid;
+};
+
+static int mmm_input_mapping(struct hid_device *hdev, struct hid_input *hi,
+ struct hid_field *field, struct hid_usage *usage,
+ unsigned long **bit, int *max)
+{
+ switch (usage->hid & HID_USAGE_PAGE) {
+
+ case HID_UP_BUTTON:
+ return -1;
+
+ case HID_UP_GENDESK:
+ switch (usage->hid) {
+ case HID_GD_X:
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_POSITION_X);
+ /* touchscreen emulation */
+ input_set_abs_params(hi->input, ABS_X,
+ field->logical_minimum,
+ field->logical_maximum, 0, 0);
+ return 1;
+ case HID_GD_Y:
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_POSITION_Y);
+ /* touchscreen emulation */
+ input_set_abs_params(hi->input, ABS_Y,
+ field->logical_minimum,
+ field->logical_maximum, 0, 0);
+ return 1;
+ }
+ return 0;
+
+ case HID_UP_DIGITIZER:
+ switch (usage->hid) {
+ /* we do not want to map these: no input-oriented meaning */
+ case 0x14:
+ case 0x23:
+ case HID_DG_INPUTMODE:
+ case HID_DG_DEVICEINDEX:
+ case HID_DG_CONTACTCOUNT:
+ case HID_DG_CONTACTMAX:
+ case HID_DG_INRANGE:
+ case HID_DG_CONFIDENCE:
+ return -1;
+ case HID_DG_TIPSWITCH:
+ /* touchscreen emulation */
+ hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
+ return 1;
+ case HID_DG_CONTACTID:
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_TRACKING_ID);
+ return 1;
+ }
+ /* let hid-input decide for the others */
+ return 0;
+
+ case 0xff000000:
+ /* we do not want to map these: no input-oriented meaning */
+ return -1;
+ }
+
+ return 0;
+}
+
+static int mmm_input_mapped(struct hid_device *hdev, struct hid_input *hi,
+ struct hid_field *field, struct hid_usage *usage,
+ unsigned long **bit, int *max)
+{
+ if (usage->type == EV_KEY || usage->type == EV_ABS)
+ clear_bit(usage->code, *bit);
+
+ return 0;
+}
+
+/*
+ * this function is called when a whole packet has been received and processed,
+ * so that it can decide what to send to the input layer.
+ */
+static void mmm_filter_event(struct mmm_data *md, struct input_dev *input)
+{
+ struct mmm_finger *oldest = 0;
+ bool pressed = false, released = false;
+ int i;
+
+ /*
+ * we need to iterate on all fingers to decide if we have a press
+ * or a release event in our touchscreen emulation.
+ */
+ for (i = 0; i < 10; ++i) {
+ struct mmm_finger *f = &md->f[i];
+ if (!f->valid) {
+ /* this finger is just placeholder data, ignore */
+ } else if (f->touch) {
+ /* this finger is on the screen */
+ input_event(input, EV_ABS, ABS_MT_TRACKING_ID, i);
+ input_event(input, EV_ABS, ABS_MT_POSITION_X, f->x);
+ input_event(input, EV_ABS, ABS_MT_POSITION_Y, f->y);
+ input_mt_sync(input);
+ /*
+ * touchscreen emulation: maintain the age rank
+ * of this finger, decide if we have a press
+ */
+ if (f->rank == 0) {
+ f->rank = ++(md->num);
+ if (f->rank == 1)
+ pressed = true;
+ }
+ if (f->rank == 1)
+ oldest = f;
+ } else {
+ /* this finger took off the screen */
+ /* touchscreen emulation: maintain age rank of others */
+ int j;
+
+ for (j = 0; j < 10; ++j) {
+ struct mmm_finger *g = &md->f[j];
+ if (g->rank > f->rank) {
+ g->rank--;
+ if (g->rank == 1)
+ oldest = g;
+ }
+ }
+ f->rank = 0;
+ --(md->num);
+ if (md->num == 0)
+ released = true;
+ }
+ f->valid = 0;
+ }
+
+ /* touchscreen emulation */
+ if (oldest) {
+ if (pressed)
+ input_event(input, EV_KEY, BTN_TOUCH, 1);
+ input_event(input, EV_ABS, ABS_X, oldest->x);
+ input_event(input, EV_ABS, ABS_Y, oldest->y);
+ } else if (released) {
+ input_event(input, EV_KEY, BTN_TOUCH, 0);
+ }
+}
+
+/*
+ * this function is called upon all reports
+ * so that we can accumulate contact point information,
+ * and call input_mt_sync after each point.
+ */
+static int mmm_event(struct hid_device *hid, struct hid_field *field,
+ struct hid_usage *usage, __s32 value)
+{
+ struct mmm_data *md = hid_get_drvdata(hid);
+ /*
+ * strangely, this function can be called before
+ * field->hidinput is initialized!
+ */
+ if (hid->claimed & HID_CLAIMED_INPUT) {
+ struct input_dev *input = field->hidinput->input;
+ switch (usage->hid) {
+ case HID_DG_TIPSWITCH:
+ md->touch = value;
+ break;
+ case HID_DG_CONFIDENCE:
+ md->valid = value;
+ break;
+ case HID_DG_CONTACTID:
+ if (md->valid) {
+ md->curid = value;
+ md->f[value].touch = md->touch;
+ md->f[value].valid = 1;
+ }
+ break;
+ case HID_GD_X:
+ if (md->valid)
+ md->f[md->curid].x = value;
+ break;
+ case HID_GD_Y:
+ if (md->valid)
+ md->f[md->curid].y = value;
+ break;
+ case HID_DG_CONTACTCOUNT:
+ mmm_filter_event(md, input);
+ break;
+ }
+ }
+
+ /* we have handled the hidinput part, now remains hiddev */
+ if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event)
+ hid->hiddev_hid_event(hid, field, usage, value);
+
+ return 1;
+}
+
+static int mmm_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+ int ret;
+ struct mmm_data *md;
+
+ md = kzalloc(sizeof(struct mmm_data), GFP_KERNEL);
+ if (!md) {
+ dev_err(&hdev->dev, "cannot allocate 3M data\n");
+ return -ENOMEM;
+ }
+ hid_set_drvdata(hdev, md);
+
+ ret = hid_parse(hdev);
+ if (!ret)
+ ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+
+ if (ret)
+ kfree(md);
+ return ret;
+}
+
+static void mmm_remove(struct hid_device *hdev)
+{
+ hid_hw_stop(hdev);
+ kfree(hid_get_drvdata(hdev));
+ hid_set_drvdata(hdev, NULL);
+}
+
+static const struct hid_device_id mmm_devices[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_3M, USB_DEVICE_ID_3M1968) },
+ { }
+};
+MODULE_DEVICE_TABLE(hid, mmm_devices);
+
+static const struct hid_usage_id mmm_grabbed_usages[] = {
+ { HID_ANY_ID, HID_ANY_ID, HID_ANY_ID },
+ { HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1}
+};
+
+static struct hid_driver mmm_driver = {
+ .name = "3m-pct",
+ .id_table = mmm_devices,
+ .probe = mmm_probe,
+ .remove = mmm_remove,
+ .input_mapping = mmm_input_mapping,
+ .input_mapped = mmm_input_mapped,
+ .usage_table = mmm_grabbed_usages,
+ .event = mmm_event,
+};
+
+static int __init mmm_init(void)
+{
+ return hid_register_driver(&mmm_driver);
+}
+
+static void __exit mmm_exit(void)
+{
+ hid_unregister_driver(&mmm_driver);
+}
+
+module_init(mmm_init);
+module_exit(mmm_exit);
+MODULE_LICENSE("GPL");
+
MODULE_PARM_DESC(fnmode, "Mode of fn key on Apple keyboards (0 = disabled, "
"[1] = fkeyslast, 2 = fkeysfirst)");
+static unsigned int iso_layout = 1;
+module_param(iso_layout, uint, 0644);
+MODULE_PARM_DESC(iso_layout, "Enable/Disable hardcoded ISO-layout of the keyboard. "
+ "(0 = disabled, [1] = enabled)");
+
struct apple_sc {
unsigned long quirks;
unsigned int fn_on;
}
}
- if (asc->quirks & APPLE_ISO_KEYBOARD) {
- trans = apple_find_translation(apple_iso_keyboard, usage->code);
- if (trans) {
- input_event(input, usage->type, trans->to, value);
- return 1;
+ if (iso_layout) {
+ if (asc->quirks & APPLE_ISO_KEYBOARD) {
+ trans = apple_find_translation(apple_iso_keyboard, usage->code);
+ if (trans) {
+ input_event(input, usage->type, trans->to, value);
+ return 1;
+ }
}
}
* Copyright (c) 1999 Andreas Gal
* Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
* Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
- * Copyright (c) 2006-2007 Jiri Kosina
+ * Copyright (c) 2006-2010 Jiri Kosina
*/
/*
* Register a new report for a device.
*/
-static struct hid_report *hid_register_report(struct hid_device *device, unsigned type, unsigned id)
+struct hid_report *hid_register_report(struct hid_device *device, unsigned type, unsigned id)
{
struct hid_report_enum *report_enum = device->report_enum + type;
struct hid_report *report;
return report;
}
+EXPORT_SYMBOL_GPL(hid_register_report);
/*
* Register a new field for this report.
__u32 data;
unsigned n;
- if (item->size == 0) {
+ /* Local delimiter could have value 0, which allows size to be 0 */
+ if (item->size == 0 && item->tag != HID_LOCAL_ITEM_TAG_DELIMITER) {
dbg_hid("item data expected for local item\n");
return -1;
}
/* a list of devices for which there is a specialized driver on HID bus */
static const struct hid_device_id hid_blacklist[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_3M, USB_DEVICE_ID_3M1968) },
{ HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU) },
{ HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_X5_005D) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ATV_IRCONTROL) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL4) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MIGHTYMOUSE) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MAGICMOUSE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WINGMAN_F3D) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WINGMAN_FFG ) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_FORCE3D_PRO) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_FLIGHT_SYSTEM_G940) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G25_WHEEL) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_WIRELESS_OPTICAL_DESKTOP_3_0) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MONTEREY, USB_DEVICE_ID_GENIUS_KB29E) },
{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_WKB2000) },
{ HID_USB_DEVICE(USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_IR_REMOTE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_STANTUM, USB_DEVICE_ID_MTP) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SUNPLUS, USB_DEVICE_ID_SUNPLUS_WDESKTOP) },
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb300) },
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb304) },
{ HID_USB_DEVICE(USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_24) },
{ HID_USB_DEVICE(USB_VENDOR_ID_AIRCABLE, USB_DEVICE_ID_AIRCABLE1) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ALCOR, USB_DEVICE_ID_ALCOR_USBRS232) },
- { HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_LCM)},
- { HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_LCM2)},
+ { HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_T91MT)},
+ { HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_LCM)},
+ { HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_LCM2)},
{ HID_USB_DEVICE(USB_VENDOR_ID_AVERMEDIA, USB_DEVICE_ID_AVER_FM_MR800) },
{ HID_USB_DEVICE(USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CIDC, 0x0103) },
{ HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0004) },
{ HID_USB_DEVICE(USB_VENDOR_ID_PHILIPS, USB_DEVICE_ID_PHILIPS_IEEE802154_DONGLE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_POWERCOM, USB_DEVICE_ID_POWERCOM_UPS) },
- { HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY1) },
- { HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP) },
{ HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) },
[EV_SND] = sounds, [EV_REP] = repeats,
};
-void hid_resolv_event(__u8 type, __u16 code, struct seq_file *f) {
-
+static void hid_resolv_event(__u8 type, __u16 code, struct seq_file *f)
+{
seq_printf(f, "%s.%s", events[type] ? events[type] : "?",
names[type] ? (names[type][code] ? names[type][code] : "?") : "?");
}
-void hid_dump_input_mapping(struct hid_device *hid, struct seq_file *f)
+static void hid_dump_input_mapping(struct hid_device *hid, struct seq_file *f)
{
int i, j, k;
struct hid_report *report;
#ifndef HID_IDS_H_FILE
#define HID_IDS_H_FILE
+#define USB_VENDOR_ID_3M 0x0596
+#define USB_DEVICE_ID_3M1968 0x0500
+
#define USB_VENDOR_ID_A4TECH 0x09da
#define USB_DEVICE_ID_A4TECH_WCP32PU 0x0006
#define USB_DEVICE_ID_A4TECH_X5_005D 0x000a
#define USB_VENDOR_ID_APPLE 0x05ac
#define USB_DEVICE_ID_APPLE_MIGHTYMOUSE 0x0304
+#define USB_DEVICE_ID_APPLE_MAGICMOUSE 0x030d
#define USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI 0x020e
#define USB_DEVICE_ID_APPLE_FOUNTAIN_ISO 0x020f
#define USB_DEVICE_ID_APPLE_GEYSER_ANSI 0x0214
#define USB_DEVICE_ID_APPLE_ATV_IRCONTROL 0x8241
#define USB_DEVICE_ID_APPLE_IRCONTROL4 0x8242
-#define USB_VENDOR_ID_ASUS 0x0b05
-#define USB_DEVICE_ID_ASUS_LCM 0x1726
-#define USB_DEVICE_ID_ASUS_LCM2 0x175b
+#define USB_VENDOR_ID_ASUS 0x0486
+#define USB_DEVICE_ID_ASUS_T91MT 0x0185
+
+#define USB_VENDOR_ID_ASUSTEK 0x0b05
+#define USB_DEVICE_ID_ASUSTEK_LCM 0x1726
+#define USB_DEVICE_ID_ASUSTEK_LCM2 0x175b
#define USB_VENDOR_ID_ATEN 0x0557
#define USB_DEVICE_ID_ATEN_UC100KM 0x2004
#define USB_VENDOR_ID_ESSENTIAL_REALITY 0x0d7f
#define USB_DEVICE_ID_ESSENTIAL_REALITY_P5 0x0100
+#define USB_VENDOR_ID_ETURBOTOUCH 0x22b9
+#define USB_DEVICE_ID_ETURBOTOUCH 0x0006
+
#define USB_VENDOR_ID_ETT 0x0664
#define USB_DEVICE_ID_TC5UH 0x0309
#define USB_DEVICE_ID_LOGITECH_RUMBLEPAD2_2 0xc219
#define USB_DEVICE_ID_LOGITECH_WINGMAN_F3D 0xc283
#define USB_DEVICE_ID_LOGITECH_FORCE3D_PRO 0xc286
+#define USB_DEVICE_ID_LOGITECH_FLIGHT_SYSTEM_G940 0xc287
#define USB_DEVICE_ID_LOGITECH_WHEEL 0xc294
#define USB_DEVICE_ID_LOGITECH_WINGMAN_FFG 0xc293
#define USB_DEVICE_ID_LOGITECH_MOMO_WHEEL 0xc295
#define USB_VENDOR_ID_ONTRAK 0x0a07
#define USB_DEVICE_ID_ONTRAK_ADU100 0x0064
+#define USB_VENDOR_ID_ORTEK 0x05a4
+#define USB_DEVICE_ID_ORTEK_WKB2000 0x2000
+
#define USB_VENDOR_ID_PANJIT 0x134c
#define USB_VENDOR_ID_PANTHERLORD 0x0810
#define USB_VENDOR_ID_POWERCOM 0x0d9f
#define USB_DEVICE_ID_POWERCOM_UPS 0x0002
+#define USB_VENDOR_ID_PRODIGE 0x05af
+#define USB_DEVICE_ID_PRODIGE_CORDLESS 0x3062
+
#define USB_VENDOR_ID_SAITEK 0x06a3
#define USB_DEVICE_ID_SAITEK_RUMBLEPAD 0xff17
+#define USB_VENDOR_ID_QUANTA 0x0408
+#define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH 0x3000
+#define USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN 0x3001
+
#define USB_VENDOR_ID_SAMSUNG 0x0419
#define USB_DEVICE_ID_SAMSUNG_IR_REMOTE 0x0001
#define USB_DEVICE_ID_SOUNDGRAPH_IMON_FIRST 0x0034
#define USB_DEVICE_ID_SOUNDGRAPH_IMON_LAST 0x0046
+#define USB_VENDOR_ID_STANTUM 0x1f87
+#define USB_DEVICE_ID_MTP 0x0002
+
#define USB_VENDOR_ID_SUN 0x0430
#define USB_DEVICE_ID_RARITAN_KVM_DONGLE 0xcdab
#define USB_VENDOR_ID_SUNPLUS 0x04fc
#define USB_DEVICE_ID_SUNPLUS_WDESKTOP 0x05d8
-#define USB_VENDOR_ID_TENX 0x1130
-#define USB_DEVICE_ID_TENX_IBUDDY1 0x0001
-#define USB_DEVICE_ID_TENX_IBUDDY2 0x0002
-
#define USB_VENDOR_ID_THRUSTMASTER 0x044f
+#define USB_VENDOR_ID_TOUCHPACK 0x1bfd
+#define USB_DEVICE_ID_TOUCHPACK_RTS 0x1688
+
#define USB_VENDOR_ID_TOPMAX 0x0663
#define USB_DEVICE_ID_TOPMAX_COBRAPAD 0x0103
/*
* Copyright (c) 2000-2001 Vojtech Pavlik
- * Copyright (c) 2006-2007 Jiri Kosina
+ * Copyright (c) 2006-2010 Jiri Kosina
*
* HID to Linux Input mapping
*/
break;
case HID_UP_BUTTON:
- code = ((usage->hid - 1) & 0xf);
+ code = ((usage->hid - 1) & HID_USAGE);
switch (field->application) {
case HID_GD_MOUSE:
case HID_GD_POINTER: code += 0x110; break;
- case HID_GD_JOYSTICK: code += 0x120; break;
+ case HID_GD_JOYSTICK:
+ if (code <= 0xf)
+ code += BTN_JOYSTICK;
+ else
+ code += BTN_TRIGGER_HAPPY;
+ break;
case HID_GD_GAMEPAD: code += 0x130; break;
default:
switch (field->physical) {
case 0x192: map_key_clear(KEY_CALC); break;
case 0x194: map_key_clear(KEY_FILE); break;
case 0x196: map_key_clear(KEY_WWW); break;
+ case 0x199: map_key_clear(KEY_CHAT); break;
case 0x19c: map_key_clear(KEY_LOGOFF); break;
case 0x19e: map_key_clear(KEY_COFFEE); break;
case 0x1a6: map_key_clear(KEY_HELP); break;
#define LG_FF 0x200
#define LG_FF2 0x400
#define LG_RDESC_REL_ABS 0x800
+#define LG_FF3 0x1000
/*
* Certain Logitech keyboards send in report #3 keys which are far
goto err_free;
}
- if (quirks & (LG_FF | LG_FF2))
+ if (quirks & (LG_FF | LG_FF2 | LG_FF3))
connect_mask &= ~HID_CONNECT_FF;
ret = hid_hw_start(hdev, connect_mask);
lgff_init(hdev);
if (quirks & LG_FF2)
lg2ff_init(hdev);
+ if (quirks & LG_FF3)
+ lg3ff_init(hdev);
return 0;
err_free:
.driver_data = LG_FF },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2),
.driver_data = LG_FF2 },
+ { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_FLIGHT_SYSTEM_G940),
+ .driver_data = LG_FF3 },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACENAVIGATOR),
.driver_data = LG_RDESC_REL_ABS },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACETRAVELLER),
static inline int lg2ff_init(struct hid_device *hdev) { return -1; }
#endif
+#ifdef CONFIG_LOGIG940_FF
+int lg3ff_init(struct hid_device *hdev);
+#else
+static inline int lg3ff_init(struct hid_device *hdev) { return -1; }
+#endif
+
#endif
--- /dev/null
+/*
+ * Force feedback support for Logitech Flight System G940
+ *
+ * Copyright (c) 2009 Gary Stein <LordCnidarian@gmail.com>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+
+#include <linux/input.h>
+#include <linux/usb.h>
+#include <linux/hid.h>
+
+#include "usbhid/usbhid.h"
+#include "hid-lg.h"
+
+/*
+ * G940 Theory of Operation (from experimentation)
+ *
+ * There are 63 fields (only 3 of them currently used)
+ * 0 - seems to be command field
+ * 1 - 30 deal with the x axis
+ * 31 -60 deal with the y axis
+ *
+ * Field 1 is x axis constant force
+ * Field 31 is y axis constant force
+ *
+ * other interesting fields 1,2,3,4 on x axis
+ * (same for 31,32,33,34 on y axis)
+ *
+ * 0 0 127 127 makes the joystick autocenter hard
+ *
+ * 127 0 127 127 makes the joystick loose on the right,
+ * but stops all movemnt left
+ *
+ * -127 0 -127 -127 makes the joystick loose on the left,
+ * but stops all movement right
+ *
+ * 0 0 -127 -127 makes the joystick rattle very hard
+ *
+ * I'm sure these are effects that I don't know enough about them
+ */
+
+struct lg3ff_device {
+ struct hid_report *report;
+};
+
+static int hid_lg3ff_play(struct input_dev *dev, void *data,
+ struct ff_effect *effect)
+{
+ struct hid_device *hid = input_get_drvdata(dev);
+ struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
+ struct hid_report *report = list_entry(report_list->next, struct hid_report, list);
+ int x, y;
+
+/*
+ * Maxusage should always be 63 (maximum fields)
+ * likely a better way to ensure this data is clean
+ */
+ memset(report->field[0]->value, 0, sizeof(__s32)*report->field[0]->maxusage);
+
+ switch (effect->type) {
+ case FF_CONSTANT:
+/*
+ * Already clamped in ff_memless
+ * 0 is center (different then other logitech)
+ */
+ x = effect->u.ramp.start_level;
+ y = effect->u.ramp.end_level;
+
+ /* send command byte */
+ report->field[0]->value[0] = 0x51;
+
+/*
+ * Sign backwards from other Force3d pro
+ * which get recast here in two's complement 8 bits
+ */
+ report->field[0]->value[1] = (unsigned char)(-x);
+ report->field[0]->value[31] = (unsigned char)(-y);
+
+ usbhid_submit_report(hid, report, USB_DIR_OUT);
+ break;
+ }
+ return 0;
+}
+static void hid_lg3ff_set_autocenter(struct input_dev *dev, u16 magnitude)
+{
+ struct hid_device *hid = input_get_drvdata(dev);
+ struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
+ struct hid_report *report = list_entry(report_list->next, struct hid_report, list);
+
+/*
+ * Auto Centering probed from device
+ * NOTE: deadman's switch on G940 must be covered
+ * for effects to work
+ */
+ report->field[0]->value[0] = 0x51;
+ report->field[0]->value[1] = 0x00;
+ report->field[0]->value[2] = 0x00;
+ report->field[0]->value[3] = 0x7F;
+ report->field[0]->value[4] = 0x7F;
+ report->field[0]->value[31] = 0x00;
+ report->field[0]->value[32] = 0x00;
+ report->field[0]->value[33] = 0x7F;
+ report->field[0]->value[34] = 0x7F;
+
+ usbhid_submit_report(hid, report, USB_DIR_OUT);
+}
+
+
+static const signed short ff3_joystick_ac[] = {
+ FF_CONSTANT,
+ FF_AUTOCENTER,
+ -1
+};
+
+int lg3ff_init(struct hid_device *hid)
+{
+ struct hid_input *hidinput = list_entry(hid->inputs.next, struct hid_input, list);
+ struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
+ struct input_dev *dev = hidinput->input;
+ struct hid_report *report;
+ struct hid_field *field;
+ const signed short *ff_bits = ff3_joystick_ac;
+ int error;
+ int i;
+
+ /* Find the report to use */
+ if (list_empty(report_list)) {
+ err_hid("No output report found");
+ return -1;
+ }
+
+ /* Check that the report looks ok */
+ report = list_entry(report_list->next, struct hid_report, list);
+ if (!report) {
+ err_hid("NULL output report");
+ return -1;
+ }
+
+ field = report->field[0];
+ if (!field) {
+ err_hid("NULL field");
+ return -1;
+ }
+
+ /* Assume single fixed device G940 */
+ for (i = 0; ff_bits[i] >= 0; i++)
+ set_bit(ff_bits[i], dev->ffbit);
+
+ error = input_ff_create_memless(dev, NULL, hid_lg3ff_play);
+ if (error)
+ return error;
+
+ if (test_bit(FF_AUTOCENTER, dev->ffbit))
+ dev->ff->set_autocenter = hid_lg3ff_set_autocenter;
+
+ dev_info(&hid->dev, "Force feedback for Logitech Flight System G940 by "
+ "Gary Stein <LordCnidarian@gmail.com>\n");
+ return 0;
+}
+
{ 0x046d, 0xc219, ff_rumble },
{ 0x046d, 0xc283, ff_joystick },
{ 0x046d, 0xc286, ff_joystick_ac },
+ { 0x046d, 0xc287, ff_joystick_ac },
{ 0x046d, 0xc293, ff_joystick },
{ 0x046d, 0xc294, ff_wheel },
{ 0x046d, 0xc295, ff_joystick },
--- /dev/null
+/*
+ * Apple "Magic" Wireless Mouse driver
+ *
+ * Copyright (c) 2010 Michael Poole <mdpoole@troilus.org>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+
+#include "hid-ids.h"
+
+static bool emulate_3button = true;
+module_param(emulate_3button, bool, 0644);
+MODULE_PARM_DESC(emulate_3button, "Emulate a middle button");
+
+static int middle_button_start = -350;
+static int middle_button_stop = +350;
+
+static bool emulate_scroll_wheel = true;
+module_param(emulate_scroll_wheel, bool, 0644);
+MODULE_PARM_DESC(emulate_scroll_wheel, "Emulate a scroll wheel");
+
+static bool report_touches = true;
+module_param(report_touches, bool, 0644);
+MODULE_PARM_DESC(report_touches, "Emit touch records (otherwise, only use them for emulation)");
+
+static bool report_undeciphered;
+module_param(report_undeciphered, bool, 0644);
+MODULE_PARM_DESC(report_undeciphered, "Report undeciphered multi-touch state field using a MSC_RAW event");
+
+#define TOUCH_REPORT_ID 0x29
+/* These definitions are not precise, but they're close enough. (Bits
+ * 0x03 seem to indicate the aspect ratio of the touch, bits 0x70 seem
+ * to be some kind of bit mask -- 0x20 may be a near-field reading,
+ * and 0x40 is actual contact, and 0x10 may be a start/stop or change
+ * indication.)
+ */
+#define TOUCH_STATE_MASK 0xf0
+#define TOUCH_STATE_NONE 0x00
+#define TOUCH_STATE_START 0x30
+#define TOUCH_STATE_DRAG 0x40
+
+/**
+ * struct magicmouse_sc - Tracks Magic Mouse-specific data.
+ * @input: Input device through which we report events.
+ * @quirks: Currently unused.
+ * @last_timestamp: Timestamp from most recent (18-bit) touch report
+ * (units of milliseconds over short windows, but seems to
+ * increase faster when there are no touches).
+ * @delta_time: 18-bit difference between the two most recent touch
+ * reports from the mouse.
+ * @ntouches: Number of touches in most recent touch report.
+ * @scroll_accel: Number of consecutive scroll motions.
+ * @scroll_jiffies: Time of last scroll motion.
+ * @touches: Most recent data for a touch, indexed by tracking ID.
+ * @tracking_ids: Mapping of current touch input data to @touches.
+ */
+struct magicmouse_sc {
+ struct input_dev *input;
+ unsigned long quirks;
+
+ int last_timestamp;
+ int delta_time;
+ int ntouches;
+ int scroll_accel;
+ unsigned long scroll_jiffies;
+
+ struct {
+ short x;
+ short y;
+ short scroll_y;
+ u8 size;
+ } touches[16];
+ int tracking_ids[16];
+};
+
+static int magicmouse_firm_touch(struct magicmouse_sc *msc)
+{
+ int touch = -1;
+ int ii;
+
+ /* If there is only one "firm" touch, set touch to its
+ * tracking ID.
+ */
+ for (ii = 0; ii < msc->ntouches; ii++) {
+ int idx = msc->tracking_ids[ii];
+ if (msc->touches[idx].size < 8) {
+ /* Ignore this touch. */
+ } else if (touch >= 0) {
+ touch = -1;
+ break;
+ } else {
+ touch = idx;
+ }
+ }
+
+ return touch;
+}
+
+static void magicmouse_emit_buttons(struct magicmouse_sc *msc, int state)
+{
+ int last_state = test_bit(BTN_LEFT, msc->input->key) << 0 |
+ test_bit(BTN_RIGHT, msc->input->key) << 1 |
+ test_bit(BTN_MIDDLE, msc->input->key) << 2;
+
+ if (emulate_3button) {
+ int id;
+
+ /* If some button was pressed before, keep it held
+ * down. Otherwise, if there's exactly one firm
+ * touch, use that to override the mouse's guess.
+ */
+ if (state == 0) {
+ /* The button was released. */
+ } else if (last_state != 0) {
+ state = last_state;
+ } else if ((id = magicmouse_firm_touch(msc)) >= 0) {
+ int x = msc->touches[id].x;
+ if (x < middle_button_start)
+ state = 1;
+ else if (x > middle_button_stop)
+ state = 2;
+ else
+ state = 4;
+ } /* else: we keep the mouse's guess */
+
+ input_report_key(msc->input, BTN_MIDDLE, state & 4);
+ }
+
+ input_report_key(msc->input, BTN_LEFT, state & 1);
+ input_report_key(msc->input, BTN_RIGHT, state & 2);
+
+ if (state != last_state)
+ msc->scroll_accel = 0;
+}
+
+static void magicmouse_emit_touch(struct magicmouse_sc *msc, int raw_id, u8 *tdata)
+{
+ struct input_dev *input = msc->input;
+ __s32 x_y = tdata[0] << 8 | tdata[1] << 16 | tdata[2] << 24;
+ int misc = tdata[5] | tdata[6] << 8;
+ int id = (misc >> 6) & 15;
+ int x = x_y << 12 >> 20;
+ int y = -(x_y >> 20);
+
+ /* Store tracking ID and other fields. */
+ msc->tracking_ids[raw_id] = id;
+ msc->touches[id].x = x;
+ msc->touches[id].y = y;
+ msc->touches[id].size = misc & 63;
+
+ /* If requested, emulate a scroll wheel by detecting small
+ * vertical touch motions along the middle of the mouse.
+ */
+ if (emulate_scroll_wheel &&
+ middle_button_start < x && x < middle_button_stop) {
+ static const int accel_profile[] = {
+ 256, 228, 192, 160, 128, 96, 64, 32,
+ };
+ unsigned long now = jiffies;
+ int step = msc->touches[id].scroll_y - y;
+
+ /* Reset acceleration after half a second. */
+ if (time_after(now, msc->scroll_jiffies + HZ / 2))
+ msc->scroll_accel = 0;
+
+ /* Calculate and apply the scroll motion. */
+ switch (tdata[7] & TOUCH_STATE_MASK) {
+ case TOUCH_STATE_START:
+ msc->touches[id].scroll_y = y;
+ msc->scroll_accel = min_t(int, msc->scroll_accel + 1,
+ ARRAY_SIZE(accel_profile) - 1);
+ break;
+ case TOUCH_STATE_DRAG:
+ step = step / accel_profile[msc->scroll_accel];
+ if (step != 0) {
+ msc->touches[id].scroll_y = y;
+ msc->scroll_jiffies = now;
+ input_report_rel(input, REL_WHEEL, step);
+ }
+ break;
+ }
+ }
+
+ /* Generate the input events for this touch. */
+ if (report_touches) {
+ int orientation = (misc >> 10) - 32;
+
+ input_report_abs(input, ABS_MT_TRACKING_ID, id);
+ input_report_abs(input, ABS_MT_TOUCH_MAJOR, tdata[3]);
+ input_report_abs(input, ABS_MT_TOUCH_MINOR, tdata[4]);
+ input_report_abs(input, ABS_MT_ORIENTATION, orientation);
+ input_report_abs(input, ABS_MT_POSITION_X, x);
+ input_report_abs(input, ABS_MT_POSITION_Y, y);
+
+ if (report_undeciphered)
+ input_event(input, EV_MSC, MSC_RAW, tdata[7]);
+
+ input_mt_sync(input);
+ }
+}
+
+static int magicmouse_raw_event(struct hid_device *hdev,
+ struct hid_report *report, u8 *data, int size)
+{
+ struct magicmouse_sc *msc = hid_get_drvdata(hdev);
+ struct input_dev *input = msc->input;
+ int x, y, ts, ii, clicks;
+
+ switch (data[0]) {
+ case 0x10:
+ if (size != 6)
+ return 0;
+ x = (__s16)(data[2] | data[3] << 8);
+ y = (__s16)(data[4] | data[5] << 8);
+ clicks = data[1];
+ break;
+ case TOUCH_REPORT_ID:
+ /* Expect six bytes of prefix, and N*8 bytes of touch data. */
+ if (size < 6 || ((size - 6) % 8) != 0)
+ return 0;
+ ts = data[3] >> 6 | data[4] << 2 | data[5] << 10;
+ msc->delta_time = (ts - msc->last_timestamp) & 0x3ffff;
+ msc->last_timestamp = ts;
+ msc->ntouches = (size - 6) / 8;
+ for (ii = 0; ii < msc->ntouches; ii++)
+ magicmouse_emit_touch(msc, ii, data + ii * 8 + 6);
+ /* When emulating three-button mode, it is important
+ * to have the current touch information before
+ * generating a click event.
+ */
+ x = (signed char)data[1];
+ y = (signed char)data[2];
+ clicks = data[3];
+ break;
+ case 0x20: /* Theoretically battery status (0-100), but I have
+ * never seen it -- maybe it is only upon request.
+ */
+ case 0x60: /* Unknown, maybe laser on/off. */
+ case 0x61: /* Laser reflection status change.
+ * data[1]: 0 = spotted, 1 = lost
+ */
+ default:
+ return 0;
+ }
+
+ magicmouse_emit_buttons(msc, clicks & 3);
+ input_report_rel(input, REL_X, x);
+ input_report_rel(input, REL_Y, y);
+ input_sync(input);
+ return 1;
+}
+
+static int magicmouse_input_open(struct input_dev *dev)
+{
+ struct hid_device *hid = input_get_drvdata(dev);
+
+ return hid->ll_driver->open(hid);
+}
+
+static void magicmouse_input_close(struct input_dev *dev)
+{
+ struct hid_device *hid = input_get_drvdata(dev);
+
+ hid->ll_driver->close(hid);
+}
+
+static void magicmouse_setup_input(struct input_dev *input, struct hid_device *hdev)
+{
+ input_set_drvdata(input, hdev);
+ input->event = hdev->ll_driver->hidinput_input_event;
+ input->open = magicmouse_input_open;
+ input->close = magicmouse_input_close;
+
+ input->name = hdev->name;
+ input->phys = hdev->phys;
+ input->uniq = hdev->uniq;
+ input->id.bustype = hdev->bus;
+ input->id.vendor = hdev->vendor;
+ input->id.product = hdev->product;
+ input->id.version = hdev->version;
+ input->dev.parent = hdev->dev.parent;
+
+ __set_bit(EV_KEY, input->evbit);
+ __set_bit(BTN_LEFT, input->keybit);
+ __set_bit(BTN_RIGHT, input->keybit);
+ if (emulate_3button)
+ __set_bit(BTN_MIDDLE, input->keybit);
+ __set_bit(BTN_TOOL_FINGER, input->keybit);
+
+ __set_bit(EV_REL, input->evbit);
+ __set_bit(REL_X, input->relbit);
+ __set_bit(REL_Y, input->relbit);
+ if (emulate_scroll_wheel)
+ __set_bit(REL_WHEEL, input->relbit);
+
+ if (report_touches) {
+ __set_bit(EV_ABS, input->evbit);
+
+ input_set_abs_params(input, ABS_MT_TRACKING_ID, 0, 15, 0, 0);
+ input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 255, 4, 0);
+ input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 255, 4, 0);
+ input_set_abs_params(input, ABS_MT_ORIENTATION, -32, 31, 1, 0);
+ input_set_abs_params(input, ABS_MT_POSITION_X, -1100, 1358,
+ 4, 0);
+ /* Note: Touch Y position from the device is inverted relative
+ * to how pointer motion is reported (and relative to how USB
+ * HID recommends the coordinates work). This driver keeps
+ * the origin at the same position, and just uses the additive
+ * inverse of the reported Y.
+ */
+ input_set_abs_params(input, ABS_MT_POSITION_Y, -1589, 2047,
+ 4, 0);
+ }
+
+ if (report_undeciphered) {
+ __set_bit(EV_MSC, input->evbit);
+ __set_bit(MSC_RAW, input->mscbit);
+ }
+}
+
+static int magicmouse_probe(struct hid_device *hdev,
+ const struct hid_device_id *id)
+{
+ __u8 feature_1[] = { 0xd7, 0x01 };
+ __u8 feature_2[] = { 0xf8, 0x01, 0x32 };
+ struct input_dev *input;
+ struct magicmouse_sc *msc;
+ struct hid_report *report;
+ int ret;
+
+ msc = kzalloc(sizeof(*msc), GFP_KERNEL);
+ if (msc == NULL) {
+ dev_err(&hdev->dev, "can't alloc magicmouse descriptor\n");
+ return -ENOMEM;
+ }
+
+ msc->quirks = id->driver_data;
+ hid_set_drvdata(hdev, msc);
+
+ ret = hid_parse(hdev);
+ if (ret) {
+ dev_err(&hdev->dev, "magicmouse hid parse failed\n");
+ goto err_free;
+ }
+
+ ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+ if (ret) {
+ dev_err(&hdev->dev, "magicmouse hw start failed\n");
+ goto err_free;
+ }
+
+ report = hid_register_report(hdev, HID_INPUT_REPORT, TOUCH_REPORT_ID);
+ if (!report) {
+ dev_err(&hdev->dev, "unable to register touch report\n");
+ ret = -ENOMEM;
+ goto err_stop_hw;
+ }
+ report->size = 6;
+
+ ret = hdev->hid_output_raw_report(hdev, feature_1, sizeof(feature_1),
+ HID_FEATURE_REPORT);
+ if (ret != sizeof(feature_1)) {
+ dev_err(&hdev->dev, "unable to request touch data (1:%d)\n",
+ ret);
+ goto err_stop_hw;
+ }
+ ret = hdev->hid_output_raw_report(hdev, feature_2,
+ sizeof(feature_2), HID_FEATURE_REPORT);
+ if (ret != sizeof(feature_2)) {
+ dev_err(&hdev->dev, "unable to request touch data (2:%d)\n",
+ ret);
+ goto err_stop_hw;
+ }
+
+ input = input_allocate_device();
+ if (!input) {
+ dev_err(&hdev->dev, "can't alloc input device\n");
+ ret = -ENOMEM;
+ goto err_stop_hw;
+ }
+ magicmouse_setup_input(input, hdev);
+
+ ret = input_register_device(input);
+ if (ret) {
+ dev_err(&hdev->dev, "input device registration failed\n");
+ goto err_input;
+ }
+ msc->input = input;
+
+ return 0;
+err_input:
+ input_free_device(input);
+err_stop_hw:
+ hid_hw_stop(hdev);
+err_free:
+ kfree(msc);
+ return ret;
+}
+
+static void magicmouse_remove(struct hid_device *hdev)
+{
+ hid_hw_stop(hdev);
+ kfree(hid_get_drvdata(hdev));
+}
+
+static const struct hid_device_id magic_mice[] = {
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MAGICMOUSE),
+ .driver_data = 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(hid, magic_mice);
+
+static struct hid_driver magicmouse_driver = {
+ .name = "magicmouse",
+ .id_table = magic_mice,
+ .probe = magicmouse_probe,
+ .remove = magicmouse_remove,
+ .raw_event = magicmouse_raw_event,
+};
+
+static int __init magicmouse_init(void)
+{
+ int ret;
+
+ ret = hid_register_driver(&magicmouse_driver);
+ if (ret)
+ printk(KERN_ERR "can't register magicmouse driver\n");
+
+ return ret;
+}
+
+static void __exit magicmouse_exit(void)
+{
+ hid_unregister_driver(&magicmouse_driver);
+}
+
+module_init(magicmouse_init);
+module_exit(magicmouse_exit);
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * HID driver for the multitouch panel on the ASUS EeePC T91MT
+ *
+ * Copyright (c) 2009-2010 Stephane Chatty <chatty@enac.fr>
+ * Copyright (c) 2010 Teemu Tuominen <teemu.tuominen@cybercom.com>
+ *
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include "usbhid/usbhid.h"
+
+MODULE_AUTHOR("Stephane Chatty <chatty@enac.fr>");
+MODULE_DESCRIPTION("MosArt dual-touch panel");
+MODULE_LICENSE("GPL");
+
+#include "hid-ids.h"
+
+struct mosart_data {
+ __u16 x, y;
+ __u8 id;
+ bool valid; /* valid finger data, or just placeholder? */
+ bool first; /* is this the first finger in this frame? */
+ bool activity_now; /* at least one active finger in this frame? */
+ bool activity; /* at least one active finger previously? */
+};
+
+static int mosart_input_mapping(struct hid_device *hdev, struct hid_input *hi,
+ struct hid_field *field, struct hid_usage *usage,
+ unsigned long **bit, int *max)
+{
+ switch (usage->hid & HID_USAGE_PAGE) {
+
+ case HID_UP_GENDESK:
+ switch (usage->hid) {
+ case HID_GD_X:
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_POSITION_X);
+ /* touchscreen emulation */
+ input_set_abs_params(hi->input, ABS_X,
+ field->logical_minimum,
+ field->logical_maximum, 0, 0);
+ return 1;
+ case HID_GD_Y:
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_POSITION_Y);
+ /* touchscreen emulation */
+ input_set_abs_params(hi->input, ABS_Y,
+ field->logical_minimum,
+ field->logical_maximum, 0, 0);
+ return 1;
+ }
+ return 0;
+
+ case HID_UP_DIGITIZER:
+ switch (usage->hid) {
+ case HID_DG_CONFIDENCE:
+ case HID_DG_TIPSWITCH:
+ case HID_DG_INPUTMODE:
+ case HID_DG_DEVICEINDEX:
+ case HID_DG_CONTACTCOUNT:
+ case HID_DG_CONTACTMAX:
+ case HID_DG_TIPPRESSURE:
+ case HID_DG_WIDTH:
+ case HID_DG_HEIGHT:
+ return -1;
+ case HID_DG_INRANGE:
+ /* touchscreen emulation */
+ hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
+ return 1;
+
+ case HID_DG_CONTACTID:
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_TRACKING_ID);
+ return 1;
+
+ }
+ return 0;
+
+ case 0xff000000:
+ /* ignore HID features */
+ return -1;
+ }
+
+ return 0;
+}
+
+static int mosart_input_mapped(struct hid_device *hdev, struct hid_input *hi,
+ struct hid_field *field, struct hid_usage *usage,
+ unsigned long **bit, int *max)
+{
+ if (usage->type == EV_KEY || usage->type == EV_ABS)
+ clear_bit(usage->code, *bit);
+
+ return 0;
+}
+
+/*
+ * this function is called when a whole finger has been parsed,
+ * so that it can decide what to send to the input layer.
+ */
+static void mosart_filter_event(struct mosart_data *td, struct input_dev *input)
+{
+ td->first = !td->first; /* touchscreen emulation */
+
+ if (!td->valid) {
+ /*
+ * touchscreen emulation: if no finger in this frame is valid
+ * and there previously was finger activity, this is a release
+ */
+ if (!td->first && !td->activity_now && td->activity) {
+ input_event(input, EV_KEY, BTN_TOUCH, 0);
+ td->activity = false;
+ }
+ return;
+ }
+
+ input_event(input, EV_ABS, ABS_MT_TRACKING_ID, td->id);
+ input_event(input, EV_ABS, ABS_MT_POSITION_X, td->x);
+ input_event(input, EV_ABS, ABS_MT_POSITION_Y, td->y);
+
+ input_mt_sync(input);
+ td->valid = false;
+
+ /* touchscreen emulation: if first active finger in this frame... */
+ if (!td->activity_now) {
+ /* if there was no previous activity, emit touch event */
+ if (!td->activity) {
+ input_event(input, EV_KEY, BTN_TOUCH, 1);
+ td->activity = true;
+ }
+ td->activity_now = true;
+ /* and in any case this is our preferred finger */
+ input_event(input, EV_ABS, ABS_X, td->x);
+ input_event(input, EV_ABS, ABS_Y, td->y);
+ }
+}
+
+
+static int mosart_event(struct hid_device *hid, struct hid_field *field,
+ struct hid_usage *usage, __s32 value)
+{
+ struct mosart_data *td = hid_get_drvdata(hid);
+
+ if (hid->claimed & HID_CLAIMED_INPUT) {
+ struct input_dev *input = field->hidinput->input;
+ switch (usage->hid) {
+ case HID_DG_INRANGE:
+ td->valid = !!value;
+ break;
+ case HID_GD_X:
+ td->x = value;
+ break;
+ case HID_GD_Y:
+ td->y = value;
+ mosart_filter_event(td, input);
+ break;
+ case HID_DG_CONTACTID:
+ td->id = value;
+ break;
+ case HID_DG_CONTACTCOUNT:
+ /* touch emulation: this is the last field in a frame */
+ td->first = false;
+ td->activity_now = false;
+ break;
+ case HID_DG_CONFIDENCE:
+ case HID_DG_TIPSWITCH:
+ /* avoid interference from generic hidinput handling */
+ break;
+
+ default:
+ /* fallback to the generic hidinput handling */
+ return 0;
+ }
+ }
+
+ /* we have handled the hidinput part, now remains hiddev */
+ if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event)
+ hid->hiddev_hid_event(hid, field, usage, value);
+
+ return 1;
+}
+
+static int mosart_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+ int ret;
+ struct mosart_data *td;
+
+
+ td = kmalloc(sizeof(struct mosart_data), GFP_KERNEL);
+ if (!td) {
+ dev_err(&hdev->dev, "cannot allocate MosArt data\n");
+ return -ENOMEM;
+ }
+ td->valid = false;
+ td->activity = false;
+ td->activity_now = false;
+ td->first = false;
+ hid_set_drvdata(hdev, td);
+
+ /* currently, it's better to have one evdev device only */
+#if 0
+ hdev->quirks |= HID_QUIRK_MULTI_INPUT;
+#endif
+
+ ret = hid_parse(hdev);
+ if (ret == 0)
+ ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+
+ if (ret == 0) {
+ struct hid_report_enum *re = hdev->report_enum
+ + HID_FEATURE_REPORT;
+ struct hid_report *r = re->report_id_hash[7];
+
+ r->field[0]->value[0] = 0x02;
+ usbhid_submit_report(hdev, r, USB_DIR_OUT);
+ } else
+ kfree(td);
+
+ return ret;
+}
+
+static void mosart_remove(struct hid_device *hdev)
+{
+ hid_hw_stop(hdev);
+ kfree(hid_get_drvdata(hdev));
+ hid_set_drvdata(hdev, NULL);
+}
+
+static const struct hid_device_id mosart_devices[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_T91MT) },
+ { }
+};
+MODULE_DEVICE_TABLE(hid, mosart_devices);
+
+static const struct hid_usage_id mosart_grabbed_usages[] = {
+ { HID_ANY_ID, HID_ANY_ID, HID_ANY_ID },
+ { HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1}
+};
+
+static struct hid_driver mosart_driver = {
+ .name = "mosart",
+ .id_table = mosart_devices,
+ .probe = mosart_probe,
+ .remove = mosart_remove,
+ .input_mapping = mosart_input_mapping,
+ .input_mapped = mosart_input_mapped,
+ .usage_table = mosart_grabbed_usages,
+ .event = mosart_event,
+};
+
+static int __init mosart_init(void)
+{
+ return hid_register_driver(&mosart_driver);
+}
+
+static void __exit mosart_exit(void)
+{
+ hid_unregister_driver(&mosart_driver);
+}
+
+module_init(mosart_init);
+module_exit(mosart_exit);
+
EV_KEY, (c))
struct ntrig_data {
- __s32 x, y, id, w, h;
- char reading_a_point, found_contact_id;
- char pen_active;
- char finger_active;
- char inverted;
+ /* Incoming raw values for a single contact */
+ __u16 x, y, w, h;
+ __u16 id;
+ __u8 confidence;
+
+ bool reading_mt;
+ __u8 first_contact_confidence;
+
+ __u8 mt_footer[4];
+ __u8 mt_foot_count;
};
/*
struct hid_field *field, struct hid_usage *usage,
unsigned long **bit, int *max)
{
- switch (usage->hid & HID_USAGE_PAGE) {
+ /* No special mappings needed for the pen and single touch */
+ if (field->physical)
+ return 0;
+ switch (usage->hid & HID_USAGE_PAGE) {
case HID_UP_GENDESK:
switch (usage->hid) {
case HID_GD_X:
case HID_UP_DIGITIZER:
switch (usage->hid) {
/* we do not want to map these for now */
- case HID_DG_CONTACTID: /* value is useless */
+ case HID_DG_CONTACTID: /* Not trustworthy, squelch for now */
case HID_DG_INPUTMODE:
case HID_DG_DEVICEINDEX:
- case HID_DG_CONTACTCOUNT:
case HID_DG_CONTACTMAX:
return -1;
- /* original mapping by Rafi Rubin */
- case HID_DG_CONFIDENCE:
- nt_map_key_clear(BTN_TOOL_DOUBLETAP);
- return 1;
-
/* width/height mapped on TouchMajor/TouchMinor/Orientation */
case HID_DG_WIDTH:
hid_map_usage(hi, usage, bit, max,
struct hid_field *field, struct hid_usage *usage,
unsigned long **bit, int *max)
{
+ /* No special mappings needed for the pen and single touch */
+ if (field->physical)
+ return 0;
+
if (usage->type == EV_KEY || usage->type == EV_REL
|| usage->type == EV_ABS)
clear_bit(usage->code, *bit);
struct input_dev *input = field->hidinput->input;
struct ntrig_data *nd = hid_get_drvdata(hid);
+ /* No special handling needed for the pen */
+ if (field->application == HID_DG_PEN)
+ return 0;
+
if (hid->claimed & HID_CLAIMED_INPUT) {
switch (usage->hid) {
-
- case HID_DG_INRANGE:
- if (field->application & 0x3)
- nd->pen_active = (value != 0);
- else
- nd->finger_active = (value != 0);
- return 0;
-
- case HID_DG_INVERT:
- nd->inverted = value;
- return 0;
-
+ case 0xff000001:
+ /* Tag indicating the start of a multitouch group */
+ nd->reading_mt = 1;
+ nd->first_contact_confidence = 0;
+ break;
+ case HID_DG_CONFIDENCE:
+ nd->confidence = value;
+ break;
case HID_GD_X:
nd->x = value;
- nd->reading_a_point = 1;
+ /* Clear the contact footer */
+ nd->mt_foot_count = 0;
break;
case HID_GD_Y:
nd->y = value;
break;
case HID_DG_CONTACTID:
nd->id = value;
- /* we receive this only when in multitouch mode */
- nd->found_contact_id = 1;
break;
case HID_DG_WIDTH:
nd->w = value;
* report received in a finger event. We want
* to emit a normal (X, Y) position
*/
- if (!nd->found_contact_id) {
- if (nd->pen_active && nd->finger_active) {
- input_report_key(input, BTN_TOOL_DOUBLETAP, 0);
- input_report_key(input, BTN_TOOL_DOUBLETAP, 1);
- }
+ if (!nd->reading_mt) {
+ input_report_key(input, BTN_TOOL_DOUBLETAP,
+ (nd->confidence != 0));
input_event(input, EV_ABS, ABS_X, nd->x);
input_event(input, EV_ABS, ABS_Y, nd->y);
}
break;
- case HID_DG_TIPPRESSURE:
- /*
- * when in single touch mode, this is the last
- * report received in a pen event. We want
- * to emit a normal (X, Y) position
- */
- if (! nd->found_contact_id) {
- if (nd->pen_active && nd->finger_active) {
- input_report_key(input,
- nd->inverted ? BTN_TOOL_RUBBER : BTN_TOOL_PEN
- , 0);
- input_report_key(input,
- nd->inverted ? BTN_TOOL_RUBBER : BTN_TOOL_PEN
- , 1);
- }
- input_event(input, EV_ABS, ABS_X, nd->x);
- input_event(input, EV_ABS, ABS_Y, nd->y);
- input_event(input, EV_ABS, ABS_PRESSURE, value);
- }
- break;
case 0xff000002:
/*
* we receive this when the device is in multitouch
* this usage tells if the contact point is real
* or a placeholder
*/
- if (!nd->reading_a_point || value != 1)
+
+ /* Shouldn't get more than 4 footer packets, so skip */
+ if (nd->mt_foot_count >= 4)
break;
+
+ nd->mt_footer[nd->mt_foot_count++] = value;
+
+ /* if the footer isn't complete break */
+ if (nd->mt_foot_count != 4)
+ break;
+
+ /* Pen activity signal, trigger end of touch. */
+ if (nd->mt_footer[2]) {
+ nd->confidence = 0;
+ break;
+ }
+
+ /* If the contact was invalid */
+ if (!(nd->confidence && nd->mt_footer[0])
+ || nd->w <= 250
+ || nd->h <= 190) {
+ nd->confidence = 0;
+ break;
+ }
+
/* emit a normal (X, Y) for the first point only */
if (nd->id == 0) {
+ nd->first_contact_confidence = nd->confidence;
input_event(input, EV_ABS, ABS_X, nd->x);
input_event(input, EV_ABS, ABS_Y, nd->y);
}
ABS_MT_TOUCH_MINOR, nd->w);
}
input_mt_sync(field->hidinput->input);
- nd->reading_a_point = 0;
- nd->found_contact_id = 0;
+ break;
+
+ case HID_DG_CONTACTCOUNT: /* End of a multitouch group */
+ if (!nd->reading_mt)
+ break;
+
+ nd->reading_mt = 0;
+
+ if (nd->first_contact_confidence) {
+ switch (value) {
+ case 0: /* for single touch devices */
+ case 1:
+ input_report_key(input,
+ BTN_TOOL_DOUBLETAP, 1);
+ break;
+ case 2:
+ input_report_key(input,
+ BTN_TOOL_TRIPLETAP, 1);
+ break;
+ case 3:
+ default:
+ input_report_key(input,
+ BTN_TOOL_QUADTAP, 1);
+ }
+ input_report_key(input, BTN_TOUCH, 1);
+ } else {
+ input_report_key(input,
+ BTN_TOOL_DOUBLETAP, 0);
+ input_report_key(input,
+ BTN_TOOL_TRIPLETAP, 0);
+ input_report_key(input,
+ BTN_TOOL_QUADTAP, 0);
+ }
break;
default:
}
/* we have handled the hidinput part, now remains hiddev */
- if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event)
- hid->hiddev_hid_event(hid, field, usage, value);
+ if ((hid->claimed & HID_CLAIMED_HIDDEV) && hid->hiddev_hid_event)
+ hid->hiddev_hid_event(hid, field, usage, value);
return 1;
}
{
int ret;
struct ntrig_data *nd;
+ struct hid_input *hidinput;
+ struct input_dev *input;
+
+ if (id->driver_data)
+ hdev->quirks |= HID_QUIRK_MULTI_INPUT;
nd = kmalloc(sizeof(struct ntrig_data), GFP_KERNEL);
if (!nd) {
dev_err(&hdev->dev, "cannot allocate N-Trig data\n");
return -ENOMEM;
}
- nd->reading_a_point = 0;
- nd->found_contact_id = 0;
+
+ nd->reading_mt = 0;
hid_set_drvdata(hdev, nd);
ret = hid_parse(hdev);
- if (!ret)
- ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+ if (ret) {
+ dev_err(&hdev->dev, "parse failed\n");
+ goto err_free;
+ }
+
+ ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_FF);
+ if (ret) {
+ dev_err(&hdev->dev, "hw start failed\n");
+ goto err_free;
+ }
- if (ret)
- kfree (nd);
+ list_for_each_entry(hidinput, &hdev->inputs, list) {
+ input = hidinput->input;
+ switch (hidinput->report->field[0]->application) {
+ case HID_DG_PEN:
+ input->name = "N-Trig Pen";
+ break;
+ case HID_DG_TOUCHSCREEN:
+ __clear_bit(BTN_TOOL_PEN, input->keybit);
+ /*
+ * A little something special to enable
+ * two and three finger taps.
+ */
+ __set_bit(BTN_TOOL_DOUBLETAP, input->keybit);
+ __set_bit(BTN_TOOL_TRIPLETAP, input->keybit);
+ __set_bit(BTN_TOOL_QUADTAP, input->keybit);
+ /*
+ * The physical touchscreen (single touch)
+ * input has a value for physical, whereas
+ * the multitouch only has logical input
+ * fields.
+ */
+ input->name =
+ (hidinput->report->field[0]
+ ->physical) ?
+ "N-Trig Touchscreen" :
+ "N-Trig MultiTouch";
+ break;
+ }
+ }
+
+ return 0;
+err_free:
+ kfree(nd);
return ret;
}
static const struct hid_usage_id ntrig_grabbed_usages[] = {
{ HID_ANY_ID, HID_ANY_ID, HID_ANY_ID },
- { HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1}
+ { HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1 }
};
static struct hid_driver ntrig_driver = {
--- /dev/null
+/*
+ * HID driver for Ortek WKB-2000 (wireless keyboard + mouse trackpad).
+ * Fixes LogicalMaximum error in USB report description, see
+ * http://bugzilla.kernel.org/show_bug.cgi?id=14787
+ *
+ * Copyright (c) 2010 Johnathon Harris <jmharris@gmail.com>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+
+#include "hid-ids.h"
+
+static void ortek_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+ unsigned int rsize)
+{
+ if (rsize >= 56 && rdesc[54] == 0x25 && rdesc[55] == 0x01) {
+ dev_info(&hdev->dev, "Fixing up Ortek WKB-2000 "
+ "report descriptor.\n");
+ rdesc[55] = 0x92;
+ }
+}
+
+static const struct hid_device_id ortek_devices[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_WKB2000) },
+ { }
+};
+MODULE_DEVICE_TABLE(hid, ortek_devices);
+
+static struct hid_driver ortek_driver = {
+ .name = "ortek",
+ .id_table = ortek_devices,
+ .report_fixup = ortek_report_fixup
+};
+
+static int __init ortek_init(void)
+{
+ return hid_register_driver(&ortek_driver);
+}
+
+static void __exit ortek_exit(void)
+{
+ hid_unregister_driver(&ortek_driver);
+}
+
+module_init(ortek_init);
+module_exit(ortek_exit);
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * HID driver for Quanta Optical Touch dual-touch panels
+ *
+ * Copyright (c) 2009-2010 Stephane Chatty <chatty@enac.fr>
+ *
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+
+MODULE_AUTHOR("Stephane Chatty <chatty@enac.fr>");
+MODULE_DESCRIPTION("Quanta dual-touch panel");
+MODULE_LICENSE("GPL");
+
+#include "hid-ids.h"
+
+struct quanta_data {
+ __u16 x, y;
+ __u8 id;
+ bool valid; /* valid finger data, or just placeholder? */
+ bool first; /* is this the first finger in this frame? */
+ bool activity_now; /* at least one active finger in this frame? */
+ bool activity; /* at least one active finger previously? */
+};
+
+static int quanta_input_mapping(struct hid_device *hdev, struct hid_input *hi,
+ struct hid_field *field, struct hid_usage *usage,
+ unsigned long **bit, int *max)
+{
+ switch (usage->hid & HID_USAGE_PAGE) {
+
+ case HID_UP_GENDESK:
+ switch (usage->hid) {
+ case HID_GD_X:
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_POSITION_X);
+ /* touchscreen emulation */
+ input_set_abs_params(hi->input, ABS_X,
+ field->logical_minimum,
+ field->logical_maximum, 0, 0);
+ return 1;
+ case HID_GD_Y:
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_POSITION_Y);
+ /* touchscreen emulation */
+ input_set_abs_params(hi->input, ABS_Y,
+ field->logical_minimum,
+ field->logical_maximum, 0, 0);
+ return 1;
+ }
+ return 0;
+
+ case HID_UP_DIGITIZER:
+ switch (usage->hid) {
+ case HID_DG_CONFIDENCE:
+ case HID_DG_TIPSWITCH:
+ case HID_DG_INPUTMODE:
+ case HID_DG_DEVICEINDEX:
+ case HID_DG_CONTACTCOUNT:
+ case HID_DG_CONTACTMAX:
+ case HID_DG_TIPPRESSURE:
+ case HID_DG_WIDTH:
+ case HID_DG_HEIGHT:
+ return -1;
+ case HID_DG_INRANGE:
+ /* touchscreen emulation */
+ hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
+ return 1;
+ case HID_DG_CONTACTID:
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_TRACKING_ID);
+ return 1;
+ }
+ return 0;
+
+ case 0xff000000:
+ /* ignore vendor-specific features */
+ return -1;
+ }
+
+ return 0;
+}
+
+static int quanta_input_mapped(struct hid_device *hdev, struct hid_input *hi,
+ struct hid_field *field, struct hid_usage *usage,
+ unsigned long **bit, int *max)
+{
+ if (usage->type == EV_KEY || usage->type == EV_ABS)
+ clear_bit(usage->code, *bit);
+
+ return 0;
+}
+
+/*
+ * this function is called when a whole finger has been parsed,
+ * so that it can decide what to send to the input layer.
+ */
+static void quanta_filter_event(struct quanta_data *td, struct input_dev *input)
+{
+
+ td->first = !td->first; /* touchscreen emulation */
+
+ if (!td->valid) {
+ /*
+ * touchscreen emulation: if no finger in this frame is valid
+ * and there previously was finger activity, this is a release
+ */
+ if (!td->first && !td->activity_now && td->activity) {
+ input_event(input, EV_KEY, BTN_TOUCH, 0);
+ td->activity = false;
+ }
+ return;
+ }
+
+ input_event(input, EV_ABS, ABS_MT_TRACKING_ID, td->id);
+ input_event(input, EV_ABS, ABS_MT_POSITION_X, td->x);
+ input_event(input, EV_ABS, ABS_MT_POSITION_Y, td->y);
+
+ input_mt_sync(input);
+ td->valid = false;
+
+ /* touchscreen emulation: if first active finger in this frame... */
+ if (!td->activity_now) {
+ /* if there was no previous activity, emit touch event */
+ if (!td->activity) {
+ input_event(input, EV_KEY, BTN_TOUCH, 1);
+ td->activity = true;
+ }
+ td->activity_now = true;
+ /* and in any case this is our preferred finger */
+ input_event(input, EV_ABS, ABS_X, td->x);
+ input_event(input, EV_ABS, ABS_Y, td->y);
+ }
+}
+
+
+static int quanta_event(struct hid_device *hid, struct hid_field *field,
+ struct hid_usage *usage, __s32 value)
+{
+ struct quanta_data *td = hid_get_drvdata(hid);
+
+ if (hid->claimed & HID_CLAIMED_INPUT) {
+ struct input_dev *input = field->hidinput->input;
+
+ switch (usage->hid) {
+ case HID_DG_INRANGE:
+ td->valid = !!value;
+ break;
+ case HID_GD_X:
+ td->x = value;
+ break;
+ case HID_GD_Y:
+ td->y = value;
+ quanta_filter_event(td, input);
+ break;
+ case HID_DG_CONTACTID:
+ td->id = value;
+ break;
+ case HID_DG_CONTACTCOUNT:
+ /* touch emulation: this is the last field in a frame */
+ td->first = false;
+ td->activity_now = false;
+ break;
+ case HID_DG_CONFIDENCE:
+ case HID_DG_TIPSWITCH:
+ /* avoid interference from generic hidinput handling */
+ break;
+
+ default:
+ /* fallback to the generic hidinput handling */
+ return 0;
+ }
+ }
+
+ /* we have handled the hidinput part, now remains hiddev */
+ if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event)
+ hid->hiddev_hid_event(hid, field, usage, value);
+
+ return 1;
+}
+
+static int quanta_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+ int ret;
+ struct quanta_data *td;
+
+ td = kmalloc(sizeof(struct quanta_data), GFP_KERNEL);
+ if (!td) {
+ dev_err(&hdev->dev, "cannot allocate Quanta Touch data\n");
+ return -ENOMEM;
+ }
+ td->valid = false;
+ td->activity = false;
+ td->activity_now = false;
+ td->first = false;
+ hid_set_drvdata(hdev, td);
+
+ ret = hid_parse(hdev);
+ if (!ret)
+ ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+
+ if (ret)
+ kfree(td);
+
+ return ret;
+}
+
+static void quanta_remove(struct hid_device *hdev)
+{
+ hid_hw_stop(hdev);
+ kfree(hid_get_drvdata(hdev));
+ hid_set_drvdata(hdev, NULL);
+}
+
+static const struct hid_device_id quanta_devices[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_QUANTA,
+ USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_QUANTA,
+ USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN) },
+ { }
+};
+MODULE_DEVICE_TABLE(hid, quanta_devices);
+
+static const struct hid_usage_id quanta_grabbed_usages[] = {
+ { HID_ANY_ID, HID_ANY_ID, HID_ANY_ID },
+ { HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1}
+};
+
+static struct hid_driver quanta_driver = {
+ .name = "quanta-touch",
+ .id_table = quanta_devices,
+ .probe = quanta_probe,
+ .remove = quanta_remove,
+ .input_mapping = quanta_input_mapping,
+ .input_mapped = quanta_input_mapped,
+ .usage_table = quanta_grabbed_usages,
+ .event = quanta_event,
+};
+
+static int __init quanta_init(void)
+{
+ return hid_register_driver(&quanta_driver);
+}
+
+static void __exit quanta_exit(void)
+{
+ hid_unregister_driver(&quanta_driver);
+}
+
+module_init(quanta_init);
+module_exit(quanta_exit);
+
* to "operational". Without this, the ps3 controller will not report any
* events.
*/
-static int sony_set_operational(struct hid_device *hdev)
+static int sony_set_operational_usb(struct hid_device *hdev)
{
struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
struct usb_device *dev = interface_to_usbdev(intf);
return ret;
}
+static int sony_set_operational_bt(struct hid_device *hdev)
+{
+ unsigned char buf[] = { 0x53, 0xf4, 0x42, 0x03, 0x00, 0x00 };
+ return hdev->hid_output_raw_report(hdev, buf, sizeof(buf), HID_FEATURE_REPORT);
+}
+
static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id)
{
int ret;
sc = kzalloc(sizeof(*sc), GFP_KERNEL);
if (sc == NULL) {
- dev_err(&hdev->dev, "can't alloc apple descriptor\n");
+ dev_err(&hdev->dev, "can't alloc sony descriptor\n");
return -ENOMEM;
}
goto err_free;
}
- ret = sony_set_operational(hdev);
+ switch (hdev->bus) {
+ case BUS_USB:
+ ret = sony_set_operational_usb(hdev);
+ break;
+ case BUS_BLUETOOTH:
+ ret = sony_set_operational_bt(hdev);
+ break;
+ default:
+ ret = 0;
+ }
+
if (ret < 0)
goto err_stop;
static const struct hid_device_id sony_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE),
.driver_data = VAIO_RDESC_CONSTANT },
{ }
--- /dev/null
+/*
+ * HID driver for Stantum multitouch panels
+ *
+ * Copyright (c) 2009 Stephane Chatty <chatty@enac.fr>
+ *
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+
+MODULE_AUTHOR("Stephane Chatty <chatty@enac.fr>");
+MODULE_DESCRIPTION("Stantum HID multitouch panels");
+MODULE_LICENSE("GPL");
+
+#include "hid-ids.h"
+
+struct stantum_data {
+ __s32 x, y, z, w, h; /* x, y, pressure, width, height */
+ __u16 id; /* touch id */
+ bool valid; /* valid finger data, or just placeholder? */
+ bool first; /* first finger in the HID packet? */
+ bool activity; /* at least one active finger so far? */
+};
+
+static int stantum_input_mapping(struct hid_device *hdev, struct hid_input *hi,
+ struct hid_field *field, struct hid_usage *usage,
+ unsigned long **bit, int *max)
+{
+ switch (usage->hid & HID_USAGE_PAGE) {
+
+ case HID_UP_GENDESK:
+ switch (usage->hid) {
+ case HID_GD_X:
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_POSITION_X);
+ /* touchscreen emulation */
+ input_set_abs_params(hi->input, ABS_X,
+ field->logical_minimum,
+ field->logical_maximum, 0, 0);
+ return 1;
+ case HID_GD_Y:
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_POSITION_Y);
+ /* touchscreen emulation */
+ input_set_abs_params(hi->input, ABS_Y,
+ field->logical_minimum,
+ field->logical_maximum, 0, 0);
+ return 1;
+ }
+ return 0;
+
+ case HID_UP_DIGITIZER:
+ switch (usage->hid) {
+ case HID_DG_INRANGE:
+ case HID_DG_CONFIDENCE:
+ case HID_DG_INPUTMODE:
+ case HID_DG_DEVICEINDEX:
+ case HID_DG_CONTACTCOUNT:
+ case HID_DG_CONTACTMAX:
+ return -1;
+
+ case HID_DG_TIPSWITCH:
+ /* touchscreen emulation */
+ hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
+ return 1;
+
+ case HID_DG_WIDTH:
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_TOUCH_MAJOR);
+ return 1;
+ case HID_DG_HEIGHT:
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_TOUCH_MINOR);
+ input_set_abs_params(hi->input, ABS_MT_ORIENTATION,
+ 1, 1, 0, 0);
+ return 1;
+ case HID_DG_TIPPRESSURE:
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_PRESSURE);
+ return 1;
+
+ case HID_DG_CONTACTID:
+ hid_map_usage(hi, usage, bit, max,
+ EV_ABS, ABS_MT_TRACKING_ID);
+ return 1;
+
+ }
+ return 0;
+
+ case 0xff000000:
+ /* no input-oriented meaning */
+ return -1;
+ }
+
+ return 0;
+}
+
+static int stantum_input_mapped(struct hid_device *hdev, struct hid_input *hi,
+ struct hid_field *field, struct hid_usage *usage,
+ unsigned long **bit, int *max)
+{
+ if (usage->type == EV_KEY || usage->type == EV_ABS)
+ clear_bit(usage->code, *bit);
+
+ return 0;
+}
+
+/*
+ * this function is called when a whole finger has been parsed,
+ * so that it can decide what to send to the input layer.
+ */
+static void stantum_filter_event(struct stantum_data *sd,
+ struct input_dev *input)
+{
+ bool wide;
+
+ if (!sd->valid) {
+ /*
+ * touchscreen emulation: if the first finger is not valid and
+ * there previously was finger activity, this is a release
+ */
+ if (sd->first && sd->activity) {
+ input_event(input, EV_KEY, BTN_TOUCH, 0);
+ sd->activity = false;
+ }
+ return;
+ }
+
+ input_event(input, EV_ABS, ABS_MT_TRACKING_ID, sd->id);
+ input_event(input, EV_ABS, ABS_MT_POSITION_X, sd->x);
+ input_event(input, EV_ABS, ABS_MT_POSITION_Y, sd->y);
+
+ wide = (sd->w > sd->h);
+ input_event(input, EV_ABS, ABS_MT_ORIENTATION, wide);
+ input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, wide ? sd->w : sd->h);
+ input_event(input, EV_ABS, ABS_MT_TOUCH_MINOR, wide ? sd->h : sd->w);
+
+ input_event(input, EV_ABS, ABS_MT_PRESSURE, sd->z);
+
+ input_mt_sync(input);
+ sd->valid = false;
+
+ /* touchscreen emulation */
+ if (sd->first) {
+ if (!sd->activity) {
+ input_event(input, EV_KEY, BTN_TOUCH, 1);
+ sd->activity = true;
+ }
+ input_event(input, EV_ABS, ABS_X, sd->x);
+ input_event(input, EV_ABS, ABS_Y, sd->y);
+ }
+ sd->first = false;
+}
+
+
+static int stantum_event(struct hid_device *hid, struct hid_field *field,
+ struct hid_usage *usage, __s32 value)
+{
+ struct stantum_data *sd = hid_get_drvdata(hid);
+
+ if (hid->claimed & HID_CLAIMED_INPUT) {
+ struct input_dev *input = field->hidinput->input;
+
+ switch (usage->hid) {
+ case HID_DG_INRANGE:
+ /* this is the last field in a finger */
+ stantum_filter_event(sd, input);
+ break;
+ case HID_DG_WIDTH:
+ sd->w = value;
+ break;
+ case HID_DG_HEIGHT:
+ sd->h = value;
+ break;
+ case HID_GD_X:
+ sd->x = value;
+ break;
+ case HID_GD_Y:
+ sd->y = value;
+ break;
+ case HID_DG_TIPPRESSURE:
+ sd->z = value;
+ break;
+ case HID_DG_CONTACTID:
+ sd->id = value;
+ break;
+ case HID_DG_CONFIDENCE:
+ sd->valid = !!value;
+ break;
+ case 0xff000002:
+ /* this comes only before the first finger */
+ sd->first = true;
+ break;
+
+ default:
+ /* ignore the others */
+ return 1;
+ }
+ }
+
+ /* we have handled the hidinput part, now remains hiddev */
+ if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event)
+ hid->hiddev_hid_event(hid, field, usage, value);
+
+ return 1;
+}
+
+static int stantum_probe(struct hid_device *hdev,
+ const struct hid_device_id *id)
+{
+ int ret;
+ struct stantum_data *sd;
+
+ sd = kmalloc(sizeof(struct stantum_data), GFP_KERNEL);
+ if (!sd) {
+ dev_err(&hdev->dev, "cannot allocate Stantum data\n");
+ return -ENOMEM;
+ }
+ sd->valid = false;
+ sd->first = false;
+ sd->activity = false;
+ hid_set_drvdata(hdev, sd);
+
+ ret = hid_parse(hdev);
+ if (!ret)
+ ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+
+ if (ret)
+ kfree(sd);
+
+ return ret;
+}
+
+static void stantum_remove(struct hid_device *hdev)
+{
+ hid_hw_stop(hdev);
+ kfree(hid_get_drvdata(hdev));
+ hid_set_drvdata(hdev, NULL);
+}
+
+static const struct hid_device_id stantum_devices[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_STANTUM, USB_DEVICE_ID_MTP) },
+ { }
+};
+MODULE_DEVICE_TABLE(hid, stantum_devices);
+
+static const struct hid_usage_id stantum_grabbed_usages[] = {
+ { HID_ANY_ID, HID_ANY_ID, HID_ANY_ID },
+ { HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1}
+};
+
+static struct hid_driver stantum_driver = {
+ .name = "stantum",
+ .id_table = stantum_devices,
+ .probe = stantum_probe,
+ .remove = stantum_remove,
+ .input_mapping = stantum_input_mapping,
+ .input_mapped = stantum_input_mapped,
+ .usage_table = stantum_grabbed_usages,
+ .event = stantum_event,
+};
+
+static int __init stantum_init(void)
+{
+ return hid_register_driver(&stantum_driver);
+}
+
+static void __exit stantum_exit(void)
+{
+ hid_unregister_driver(&stantum_driver);
+}
+
+module_init(stantum_init);
+module_exit(stantum_exit);
+
struct hid_input *hidinput;
struct input_dev *input;
struct wacom_data *wdata;
+ char rep_data[2];
int ret;
+ int limit;
wdata = kzalloc(sizeof(*wdata), GFP_KERNEL);
if (wdata == NULL) {
hid_set_drvdata(hdev, wdata);
+ /* Parse the HID report now */
ret = hid_parse(hdev);
if (ret) {
dev_err(&hdev->dev, "parse failed\n");
goto err_free;
}
+ /*
+ * Note that if the raw queries fail, it's not a hard failure and it
+ * is safe to continue
+ */
+
+ /* Set Wacom mode2 */
+ rep_data[0] = 0x03; rep_data[1] = 0x00;
+ limit = 3;
+ do {
+ ret = hdev->hid_output_raw_report(hdev, rep_data, 2,
+ HID_FEATURE_REPORT);
+ } while (ret < 0 && limit-- > 0);
+ if (ret < 0)
+ dev_warn(&hdev->dev, "failed to poke device #1, %d\n", ret);
+
+ /* 0x06 - high reporting speed, 0x05 - low speed */
+ rep_data[0] = 0x06; rep_data[1] = 0x00;
+ limit = 3;
+ do {
+ ret = hdev->hid_output_raw_report(hdev, rep_data, 2,
+ HID_FEATURE_REPORT);
+ } while (ret < 0 && limit-- > 0);
+ if (ret < 0)
+ dev_warn(&hdev->dev, "failed to poke device #2, %d\n", ret);
+
hidinput = list_entry(hdev->inputs.next, struct hid_input, list);
input = hidinput->input;
goto out;
}
- ret = dev->hid_output_raw_report(dev, buf, count);
+ ret = dev->hid_output_raw_report(dev, buf, count, HID_OUTPUT_REPORT);
out:
kfree(buf);
return ret;
* Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
* Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
* Copyright (c) 2007-2008 Oliver Neukum
- * Copyright (c) 2006-2009 Jiri Kosina
+ * Copyright (c) 2006-2010 Jiri Kosina
*/
/*
err_hid("usb_submit_urb(out) failed");
return -1;
}
+ usbhid->last_out = jiffies;
} else {
/*
* queue work to wake up the device.
err_hid("usb_submit_urb(ctrl) failed");
return -1;
}
+ usbhid->last_ctrl = jiffies;
} else {
/*
* queue work to wake up the device.
usbhid->out[usbhid->outhead].report = report;
usbhid->outhead = head;
- if (!test_and_set_bit(HID_OUT_RUNNING, &usbhid->iofl))
+ if (!test_and_set_bit(HID_OUT_RUNNING, &usbhid->iofl)) {
if (hid_submit_out(hid))
clear_bit(HID_OUT_RUNNING, &usbhid->iofl);
+ } else {
+ /*
+ * the queue is known to run
+ * but an earlier request may be stuck
+ * we may need to time out
+ * no race because this is called under
+ * spinlock
+ */
+ if (time_after(jiffies, usbhid->last_out + HZ * 5))
+ usb_unlink_urb(usbhid->urbout);
+ }
return;
}
usbhid->ctrl[usbhid->ctrlhead].dir = dir;
usbhid->ctrlhead = head;
- if (!test_and_set_bit(HID_CTRL_RUNNING, &usbhid->iofl))
+ if (!test_and_set_bit(HID_CTRL_RUNNING, &usbhid->iofl)) {
if (hid_submit_ctrl(hid))
clear_bit(HID_CTRL_RUNNING, &usbhid->iofl);
+ } else {
+ /*
+ * the queue is known to run
+ * but an earlier request may be stuck
+ * we may need to time out
+ * no race because this is called under
+ * spinlock
+ */
+ if (time_after(jiffies, usbhid->last_ctrl + HZ * 5))
+ usb_unlink_urb(usbhid->urbctrl);
+ }
}
void usbhid_submit_report(struct hid_device *hid, struct hid_report *report, unsigned char dir)
return 0;
}
-static int usbhid_output_raw_report(struct hid_device *hid, __u8 *buf, size_t count)
+static int usbhid_output_raw_report(struct hid_device *hid, __u8 *buf, size_t count,
+ unsigned char report_type)
{
struct usbhid_device *usbhid = hid->driver_data;
struct usb_device *dev = hid_to_usb_dev(hid);
ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
HID_REQ_SET_REPORT,
USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- ((HID_OUTPUT_REPORT + 1) << 8) | *buf,
+ ((report_type + 1) << 8) | *buf,
interface->desc.bInterfaceNumber, buf + 1, count - 1,
USB_CTRL_SET_TIMEOUT);
spin_lock_init(&usbhid->lock);
- usbhid->intf = intf;
- usbhid->ifnum = interface->desc.bInterfaceNumber;
-
usbhid->urbctrl = usb_alloc_urb(0, GFP_KERNEL);
if (!usbhid->urbctrl) {
ret = -ENOMEM;
hid->driver_data = usbhid;
usbhid->hid = hid;
+ usbhid->intf = intf;
+ usbhid->ifnum = interface->desc.bInterfaceNumber;
ret = hid_add_device(hid);
if (ret) {
#endif /* CONFIG_PM */
-static struct usb_device_id hid_usb_ids [] = {
+static const struct usb_device_id hid_usb_ids[] = {
{ .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS,
.bInterfaceClass = USB_INTERFACE_CLASS_HID },
{ } /* Terminating entry */
{ USB_VENDOR_ID_AFATECH, USB_DEVICE_ID_AFATECH_AF9016, HID_QUIRK_FULLSPEED_INTERVAL },
+ { USB_VENDOR_ID_ETURBOTOUCH, USB_DEVICE_ID_ETURBOTOUCH, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_PANTHERLORD, USB_DEVICE_ID_PANTHERLORD_TWIN_USB_JOYSTICK, HID_QUIRK_MULTI_INPUT | HID_QUIRK_SKIP_OUTPUT_REPORTS },
{ USB_VENDOR_ID_PLAYDOTCOM, USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII, HID_QUIRK_MULTI_INPUT },
+ { USB_VENDOR_ID_TOUCHPACK, USB_DEVICE_ID_TOUCHPACK_RTS, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_UC100KM, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS124U, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_3AXIS_5BUTTON_STICK, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_PRODIGE, USB_DEVICE_ID_PRODIGE_CORDLESS, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_TURBOX_KEYBOARD, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_PF1209, HID_QUIRK_MULTI_INPUT },
unsigned char ctrlhead, ctrltail; /* Control fifo head & tail */
char *ctrlbuf; /* Control buffer */
dma_addr_t ctrlbuf_dma; /* Control buffer dma */
+ unsigned long last_ctrl; /* record of last output for timeouts */
struct urb *urbout; /* Output URB */
struct hid_output_fifo out[HID_CONTROL_FIFO_SIZE]; /* Output pipe fifo */
unsigned char outhead, outtail; /* Output pipe fifo head & tail */
char *outbuf; /* Output buffer */
dma_addr_t outbuf_dma; /* Output buffer dma */
+ unsigned long last_out; /* record of last output for timeouts */
spinlock_t lock; /* fifo spinlock */
unsigned long iofl; /* I/O flags (CTRL_RUNNING, OUT_RUNNING) */
*
* Some, but not all, of these voltages have low/high limits.
*/
-#define ADT7462_VOLT_COUNT 12
+#define ADT7462_VOLT_COUNT 13
#define ADT7462_VENDOR 0x41
#define ADT7462_DEVICE 0x62
static int __init lm78_isa_found(unsigned short address)
{
int val, save, found = 0;
-
- /* We have to request the region in two parts because some
- boards declare base+4 to base+7 as a PNP device */
- if (!request_region(address, 4, "lm78")) {
- pr_debug("lm78: Failed to request low part of region\n");
- return 0;
- }
- if (!request_region(address + 4, 4, "lm78")) {
- pr_debug("lm78: Failed to request high part of region\n");
- release_region(address, 4);
- return 0;
+ int port;
+
+ /* Some boards declare base+0 to base+7 as a PNP device, some base+4
+ * to base+7 and some base+5 to base+6. So we better request each port
+ * individually for the probing phase. */
+ for (port = address; port < address + LM78_EXTENT; port++) {
+ if (!request_region(port, 1, "lm78")) {
+ pr_debug("lm78: Failed to request port 0x%x\n", port);
+ goto release;
+ }
}
#define REALLY_SLOW_IO
val & 0x80 ? "LM79" : "LM78", (int)address);
release:
- release_region(address + 4, 4);
- release_region(address, 4);
+ for (port--; port >= address; port--)
+ release_region(port, 1);
return found;
}
w83781d_isa_found(unsigned short address)
{
int val, save, found = 0;
-
- /* We have to request the region in two parts because some
- boards declare base+4 to base+7 as a PNP device */
- if (!request_region(address, 4, "w83781d")) {
- pr_debug("w83781d: Failed to request low part of region\n");
- return 0;
- }
- if (!request_region(address + 4, 4, "w83781d")) {
- pr_debug("w83781d: Failed to request high part of region\n");
- release_region(address, 4);
- return 0;
+ int port;
+
+ /* Some boards declare base+0 to base+7 as a PNP device, some base+4
+ * to base+7 and some base+5 to base+6. So we better request each port
+ * individually for the probing phase. */
+ for (port = address; port < address + W83781D_EXTENT; port++) {
+ if (!request_region(port, 1, "w83781d")) {
+ pr_debug("w83781d: Failed to request port 0x%x\n",
+ port);
+ goto release;
+ }
}
#define REALLY_SLOW_IO
val == 0x30 ? "W83782D" : "W83781D", (int)address);
release:
- release_region(address + 4, 4);
- release_region(address, 4);
+ for (port--; port >= address; port--)
+ release_region(port, 1);
return found;
}
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/module.h>
+#include <linux/types.h>
/* include interfaces to usb layer */
#include <linux/usb.h>
#define CMD_I2C_IO_END (1<<1)
/* i2c bit delay, default is 10us -> 100kHz */
-static int delay = 10;
-module_param(delay, int, 0);
+static unsigned short delay = 10;
+module_param(delay, ushort, 0);
MODULE_PARM_DESC(delay, "bit delay in microseconds, "
"e.g. 10 for 100kHz (default is 100kHz)");
static u32 usb_func(struct i2c_adapter *adapter)
{
- u32 func;
+ __le32 func;
/* get functionality from adapter */
if (usb_read(adapter, CMD_GET_FUNC, 0, 0, &func, sizeof(func)) !=
return 0;
}
- return func;
+ return le32_to_cpu(func);
}
/* This is the actual algorithm we define */
"i2c-tiny-usb at bus %03d device %03d",
dev->usb_dev->bus->busnum, dev->usb_dev->devnum);
- if (usb_write(&dev->adapter, CMD_SET_DELAY,
- cpu_to_le16(delay), 0, NULL, 0) != 0) {
+ if (usb_write(&dev->adapter, CMD_SET_DELAY, delay, 0, NULL, 0) != 0) {
dev_err(&dev->adapter.dev,
"failure setting delay to %dus\n", delay);
retval = -EIO;
if (ret)
goto err1;
- if (cma_loopback_addr(addr)) {
- ret = cma_bind_loopback(id_priv);
- } else if (!cma_zero_addr(addr)) {
+ if (!cma_any_addr(addr)) {
ret = rdma_translate_ip(addr, &id->route.addr.dev_addr);
if (ret)
goto err1;
struct input_polled_dev *dev = input_get_drvdata(input);
cancel_delayed_work_sync(&dev->work);
+ /*
+ * Clean up work struct to remove references to the workqueue.
+ * It may be destroyed by the next call. This causes problems
+ * at next device open-close in case of poll_interval == 0.
+ */
+ INIT_DELAYED_WORK(&dev->work, dev->work.work.func);
input_polldev_stop_workqueue();
if (dev->close)
psmouse_deactivate(parent);
}
- psmouse_deactivate(psmouse);
+ psmouse_set_state(psmouse, PSMOUSE_INITIALIZING);
+
+ /*
+ * Disable stream mode so cleanup routine can proceed undisturbed.
+ */
+ if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_DISABLE))
+ printk(KERN_WARNING "psmouse.c: Failed to disable mouse on %s\n",
+ psmouse->ps2dev.serio->phys);
if (psmouse->cleanup)
psmouse->cleanup(psmouse);
return 0;
}
+static int i8042_pm_thaw(struct device *dev)
+{
+ i8042_interrupt(0, NULL);
+
+ return 0;
+}
+
static const struct dev_pm_ops i8042_pm_ops = {
.suspend = i8042_pm_reset,
.resume = i8042_pm_restore,
+ .thaw = i8042_pm_thaw,
.poweroff = i8042_pm_reset,
.restore = i8042_pm_restore,
};
#ifdef CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH
static int general_touch_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
- dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1] ;
- dev->y = ((pkt[4] & 0x0F) << 8) | pkt[3] ;
+ dev->x = (pkt[2] << 8) | pkt[1];
+ dev->y = (pkt[4] << 8) | pkt[3];
dev->press = pkt[5] & 0xff;
dev->touch = pkt[0] & 0x01;
#ifdef CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH
[DEVTYPE_GENERAL_TOUCH] = {
.min_xc = 0x0,
- .max_xc = 0x0500,
+ .max_xc = 0x7fff,
.min_yc = 0x0,
- .max_yc = 0x0500,
+ .max_yc = 0x7fff,
.rept_size = 7,
.read_data = general_touch_read_data,
},
{
int r = 0;
size_t dummy = 0;
- int overhead_size =
- sizeof(struct dm_ulog_request *) + sizeof(struct cn_msg);
+ int overhead_size = sizeof(struct dm_ulog_request) + sizeof(struct cn_msg);
struct dm_ulog_request *tfr = prealloced_ulog_tfr;
struct receiving_pkg pkg;
+ /*
+ * Given the space needed to hold the 'struct cn_msg' and
+ * 'struct dm_ulog_request' - do we have enough payload
+ * space remaining?
+ */
if (data_size > (DM_ULOG_PREALLOCED_SIZE - overhead_size)) {
DMINFO("Size of tfr exceeds preallocated size");
return -EINVAL;
*/
mutex_lock(&dm_ulog_lock);
- memset(tfr, 0, DM_ULOG_PREALLOCED_SIZE - overhead_size);
+ memset(tfr, 0, DM_ULOG_PREALLOCED_SIZE - sizeof(struct cn_msg));
memcpy(tfr->uuid, uuid, DM_UUID_LEN);
tfr->luid = luid;
tfr->seq = dm_ulog_seq++;
/*
* Dispatch io.
*/
- if (unlikely(ms->log_failure)) {
+ if (unlikely(ms->log_failure) && errors_handled(ms)) {
spin_lock_irq(&ms->lock);
bio_list_merge(&ms->failures, &sync);
spin_unlock_irq(&ms->lock);
spin_lock_irq(&rh->region_lock);
if (success)
list_add(®->list, ®->rh->recovered_regions);
- else {
- reg->state = DM_RH_NOSYNC;
+ else
list_add(®->list, ®->rh->failed_recovered_regions);
- }
+
spin_unlock_irq(&rh->region_lock);
rh->wakeup_workers(rh->context);
* Issue the synchronous I/O from a different thread
* to avoid generic_make_request recursion.
*/
- INIT_WORK(&req.work, do_metadata);
+ INIT_WORK_ON_STACK(&req.work, do_metadata);
queue_work(ps->metadata_wq, &req.work);
flush_workqueue(ps->metadata_wq);
}
stripes = simple_strtoul(argv[0], &end, 10);
- if (*end) {
+ if (!stripes || *end) {
ti->error = "Invalid stripe count";
return -EINVAL;
}
.show = dm_attr_show,
};
-/*
- * The sysfs structure is embedded in md struct, nothing to do here
- */
-static void dm_sysfs_release(struct kobject *kobj)
-{
-}
-
/*
* dm kobject is embedded in mapped_device structure
* no need to define release function here
static struct kobj_type dm_ktype = {
.sysfs_ops = &dm_sysfs_ops,
.default_attrs = dm_attrs,
- .release = dm_sysfs_release
};
/*
return BLKPREP_OK;
}
-static void map_request(struct dm_target *ti, struct request *clone,
- struct mapped_device *md)
+/*
+ * Returns:
+ * 0 : the request has been processed (not requeued)
+ * !0 : the request has been requeued
+ */
+static int map_request(struct dm_target *ti, struct request *clone,
+ struct mapped_device *md)
{
- int r;
+ int r, requeued = 0;
struct dm_rq_target_io *tio = clone->end_io_data;
/*
case DM_MAPIO_REQUEUE:
/* The target wants to requeue the I/O */
dm_requeue_unmapped_request(clone);
+ requeued = 1;
break;
default:
if (r > 0) {
dm_kill_unmapped_request(clone, r);
break;
}
+
+ return requeued;
}
/*
atomic_inc(&md->pending[rq_data_dir(clone)]);
spin_unlock(q->queue_lock);
- map_request(ti, clone, md);
+ if (map_request(ti, clone, md))
+ goto requeued;
+
spin_lock_irq(q->queue_lock);
}
goto out;
+requeued:
+ spin_lock_irq(q->queue_lock);
+
plug_and_out:
if (!elv_queue_empty(q))
/* Some requests still remain, retry later */
{
mddev_t *mddev = container_of(ws, mddev_t, del_work);
- if (mddev->private == &md_redundancy_group) {
+ if (mddev->private) {
sysfs_remove_group(&mddev->kobj, &md_redundancy_group);
+ if (mddev->private != (void*)1)
+ sysfs_remove_group(&mddev->kobj, mddev->private);
if (mddev->sysfs_action)
sysfs_put(mddev->sysfs_action);
mddev->sysfs_action = NULL;
sysfs_notify_dirent(rdev->sysfs_state);
}
- md_probe(mddev->unit, NULL, NULL);
disk = mddev->gendisk;
- if (!disk)
- return -ENOMEM;
spin_lock(&pers_lock);
pers = find_pers(mddev->level, mddev->clevel);
mddev->queue->unplug_fn = NULL;
mddev->queue->backing_dev_info.congested_fn = NULL;
module_put(mddev->pers->owner);
- if (mddev->pers->sync_request)
- mddev->private = &md_redundancy_group;
+ if (mddev->pers->sync_request && mddev->private == NULL)
+ mddev->private = (void*)1;
mddev->pers = NULL;
/* tell userspace to handle 'inactive' */
sysfs_notify_dirent(mddev->sysfs_state);
}
mddev->bitmap_info.offset = 0;
- /* make sure all md_delayed_delete calls have finished */
- flush_scheduled_work();
-
export_array(mddev);
mddev->array_sectors = 0;
mddev->thread = NULL;
mddev->queue->backing_dev_info.congested_fn = NULL;
blk_sync_queue(mddev->queue); /* the unplug fn references 'conf'*/
- sysfs_remove_group(&mddev->kobj, &raid5_attrs_group);
free_conf(conf);
- mddev->private = NULL;
+ mddev->private = &raid5_attrs_group;
return 0;
}
!test_bit(Faulty, &rdev->flags)) {
if (raid5_add_disk(mddev, rdev) == 0) {
char nm[20];
- if (rdev->raid_disk >= conf->previous_raid_disks)
+ if (rdev->raid_disk >= conf->previous_raid_disks) {
set_bit(In_sync, &rdev->flags);
- else
+ added_devices++;
+ } else
rdev->recovery_offset = 0;
- added_devices++;
sprintf(nm, "rd%d", rdev->raid_disk);
if (sysfs_create_link(&mddev->kobj,
&rdev->kobj, nm))
break;
}
+ /* When a reshape changes the number of devices, ->degraded
+ * is measured against the large of the pre and post number of
+ * devices.*/
if (mddev->delta_disks > 0) {
spin_lock_irqsave(&conf->device_lock, flags);
- mddev->degraded = (conf->raid_disks - conf->previous_raid_disks)
+ mddev->degraded += (conf->raid_disks - conf->previous_raid_disks)
- added_devices;
spin_unlock_irqrestore(&conf->device_lock, flags);
}
DEB_CAP(("vbuf:%p\n",vb));
- release_all_pagetables(dev, buf);
-
saa7146_dma_free(dev,q,buf);
+
+ release_all_pagetables(dev, buf);
}
static struct videobuf_queue_ops video_qops = {
dvb_ringbuffer_init(&dmxdevfilter->buffer, NULL, 8192);
dmxdevfilter->type = DMXDEV_TYPE_NONE;
dvb_dmxdev_filter_state_set(dmxdevfilter, DMXDEV_STATE_ALLOCATED);
- INIT_LIST_HEAD(&dmxdevfilter->feed.ts);
init_timer(&dmxdevfilter->timer);
dvbdev->users++;
dmxdevfilter->type = DMXDEV_TYPE_PES;
memcpy(&dmxdevfilter->params, params,
sizeof(struct dmx_pes_filter_params));
+ INIT_LIST_HEAD(&dmxdevfilter->feed.ts);
dvb_dmxdev_filter_state_set(dmxdevfilter, DMXDEV_STATE_SET);
};
};
- if (dvb_demux_tscheck) {
- if (!demux->cnt_storage)
- demux->cnt_storage = vmalloc(MAX_PID + 1);
-
- if (!demux->cnt_storage) {
- printk(KERN_WARNING "Couldn't allocate memory for TS/TEI check. Disabling it\n");
- dvb_demux_tscheck = 0;
- goto no_dvb_demux_tscheck;
- }
-
+ if (demux->cnt_storage) {
/* check pkt counter */
if (pid < MAX_PID) {
if (buf[1] & 0x80)
};
/* end check */
};
-no_dvb_demux_tscheck:
list_for_each_entry(feed, &demux->feed_list, list_head) {
if ((feed->pid != pid) && (feed->pid != 0x2000))
dvbdemux->feed = vmalloc(dvbdemux->feednum * sizeof(struct dvb_demux_feed));
if (!dvbdemux->feed) {
vfree(dvbdemux->filter);
+ dvbdemux->filter = NULL;
return -ENOMEM;
}
for (i = 0; i < dvbdemux->filternum; i++) {
dvbdemux->feed[i].index = i;
}
+ if (dvb_demux_tscheck) {
+ dvbdemux->cnt_storage = vmalloc(MAX_PID + 1);
+
+ if (!dvbdemux->cnt_storage)
+ printk(KERN_WARNING "Couldn't allocate memory for TS/TEI check. Disabling it\n");
+ }
+
INIT_LIST_HEAD(&dvbdemux->frontend_list);
for (i = 0; i < DMX_TS_PES_OTHER; i++) {
select DVB_MT352 if !DVB_FE_CUSTOMISE
select DVB_ZL10353 if !DVB_FE_CUSTOMISE
select DVB_DIB7000P if !DVB_FE_CUSTOMISE
- select DVB_LGS8GL5 if !DVB_FE_CUSTOMISE
select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE
+ select DVB_ATBM8830 if !DVB_FE_CUSTOMISE
+ select DVB_LGS8GXX if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE
+ select MEDIA_TUNER_MAX2165 if !MEDIA_TUNER_CUSTOMISE
help
Say Y here to support the Conexant USB2.0 hybrid reference design.
Currently, only DVB and ATSC modes are supported, analog mode
spi_bias *= qam_tab[p->constellation];
spi_bias /= p->code_rate_HP + 1;
spi_bias /= (guard_tab[p->guard_interval] + 32);
- spi_bias *= 1000ULL;
- spi_bias /= 1000ULL + ppm/1000;
+ spi_bias *= 1000;
+ spi_bias /= 1000 + ppm/1000;
spi_bias *= p->code_rate_HP;
val0x04 = (p->transmission_mode << 2) | p->guard_interval;
request_modules(btv);
}
+ init_bttv_i2c_ir(btv);
bttv_input_init(btv);
/* everything is fine */
if (0 == btv->i2c_rc && i2c_scan)
do_i2c_scan(btv->c.v4l2_dev.name, &btv->i2c_client);
- /* Instantiate the IR receiver device, if present */
+ return btv->i2c_rc;
+}
+
+/* Instantiate the I2C IR receiver device, if present */
+void __devinit init_bttv_i2c_ir(struct bttv *btv)
+{
if (0 == btv->i2c_rc) {
struct i2c_board_info info;
/* The external IR receiver is at i2c address 0x34 (0x35 for
strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
i2c_new_probed_device(&btv->c.i2c_adap, &info, addr_list);
}
- return btv->i2c_rc;
}
int __devexit fini_bttv_i2c(struct bttv *btv)
extern unsigned int bttv_gpio;
extern void bttv_gpio_tracking(struct bttv *btv, char *comment);
extern int init_bttv_i2c(struct bttv *btv);
+extern void init_bttv_i2c_ir(struct bttv *btv);
extern int fini_bttv_i2c(struct bttv *btv);
#define bttv_printk if (bttv_verbose) printk
/* poll to verify out of standby. Must Poll this bit */
for (i = 0; i < 100; i++) {
mt9t112_reg_read(data, client, 0x0018);
- if (0x4000 & data)
+ if (!(0x4000 & data))
break;
mdelay(10);
buf[0] = 0xff; /* fixed */
ret = send_control_msg(pdev,
- SET_LUM_CTL, SHUTTER_MODE_FORMATTER, &buf, sizeof(buf));
+ SET_LUM_CTL, SHUTTER_MODE_FORMATTER, &buf, 1);
if (!mode && ret >= 0) {
if (value < 0)
dprintk("open dev=%s\n", video_device_node_name(vdev));
err = -EBUSY;
if (!mutex_trylock(&dev->empress_tsq.vb_lock))
- goto done;
+ return err;
if (atomic_read(&dev->empress_users))
- goto done_up;
+ goto done;
/* Unmute audio */
saa_writeb(SAA7134_AUDIO_MUTE_CTRL,
file->private_data = dev;
err = 0;
-done_up:
- mutex_unlock(&dev->empress_tsq.vb_lock);
done:
- unlock_kernel();
+ mutex_unlock(&dev->empress_tsq.vb_lock);
return err;
}
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "task abort: "
"Command not in the active list! (sc=%p)\n", ioc->name,
SCpnt));
- retval = 0;
+ retval = SUCCESS;
goto out;
}
}
mrq->cmd->arg = dev_addr;
+ if (!mmc_card_blockaddr(test->card))
+ mrq->cmd->arg <<= 9;
+
mrq->cmd->flags = MMC_RSP_R1 | MMC_CMD_ADTC;
if (blocks == 1)
}
for (i = 0;i < BUFFER_SIZE / 512;i++) {
- ret = mmc_test_buffer_transfer(test, test->buffer, i * 512, 512, 1);
+ ret = mmc_test_buffer_transfer(test, test->buffer, i, 512, 1);
if (ret)
return ret;
}
memset(test->buffer, 0, 512);
for (i = 0;i < BUFFER_SIZE / 512;i++) {
- ret = mmc_test_buffer_transfer(test, test->buffer, i * 512, 512, 1);
+ ret = mmc_test_buffer_transfer(test, test->buffer, i, 512, 1);
if (ret)
return ret;
}
for (i = 0;i < sectors;i++) {
ret = mmc_test_buffer_transfer(test,
test->buffer + i * 512,
- dev_addr + i * 512, 512, 0);
+ dev_addr + i, 512, 0);
if (ret)
return ret;
}
size = (res->end - res->start) + 1;
ax->mem2 = request_mem_region(res->start, size, pdev->name);
- if (ax->mem == NULL) {
+ if (ax->mem2 == NULL) {
dev_err(&pdev->dev, "cannot reserve registers\n");
ret = -ENXIO;
goto exit_mem1;
int link_speed;
u8 port_type;
u8 transceiver;
+ u8 generation; /* BladeEngine ASIC generation */
};
+/* BladeEngine Generation numbers */
+#define BE_GEN2 2
+#define BE_GEN3 3
+
extern const struct ethtool_ops be_ethtool_ops;
#define drvr_stats(adapter) (&adapter->stats.drvr_stats)
req_hdr->opcode = opcode;
req_hdr->subsystem = subsystem;
req_hdr->request_length = cpu_to_le32(cmd_len - sizeof(*req_hdr));
+ req_hdr->version = 0;
}
static void be_cmd_page_addrs_prepare(struct phys_addr *pages, u32 max_pages,
u8 domain; /* dword 0 */
u32 timeout; /* dword 1 */
u32 request_length; /* dword 2 */
- u32 rsvd; /* dword 3 */
+ u8 version; /* dword 3 */
+ u8 rsvd[3]; /* dword 3 */
};
#define RESP_HDR_INFO_OPCODE_SHIFT 0 /* bits 0 - 7 */
int isr;
isr = ioread32(adapter->csr + CEV_ISR0_OFFSET +
- be_pci_func(adapter) * CEV_ISR_SIZE);
+ (adapter->tx_eq.q.id/ 8) * CEV_ISR_SIZE);
if (!isr)
return IRQ_NONE;
static int be_map_pci_bars(struct be_adapter *adapter)
{
u8 __iomem *addr;
+ int pcicfg_reg;
addr = ioremap_nocache(pci_resource_start(adapter->pdev, 2),
pci_resource_len(adapter->pdev, 2));
goto pci_map_err;
adapter->db = addr;
- addr = ioremap_nocache(pci_resource_start(adapter->pdev, 1),
- pci_resource_len(adapter->pdev, 1));
+ if (adapter->generation == BE_GEN2)
+ pcicfg_reg = 1;
+ else
+ pcicfg_reg = 0;
+
+ addr = ioremap_nocache(pci_resource_start(adapter->pdev, pcicfg_reg),
+ pci_resource_len(adapter->pdev, pcicfg_reg));
if (addr == NULL)
goto pci_map_err;
adapter->pcicfg = addr;
cmd->va = pci_alloc_consistent(adapter->pdev, cmd->size, &cmd->dma);
if (cmd->va == NULL)
return -1;
+ memset(cmd->va, 0, cmd->size);
return 0;
}
goto rel_reg;
}
adapter = netdev_priv(netdev);
+
+ switch (pdev->device) {
+ case BE_DEVICE_ID1:
+ case OC_DEVICE_ID1:
+ adapter->generation = BE_GEN2;
+ break;
+ case BE_DEVICE_ID2:
+ case OC_DEVICE_ID2:
+ adapter->generation = BE_GEN3;
+ break;
+ default:
+ adapter->generation = 0;
+ }
+
adapter->pdev = pdev;
pci_set_drvdata(pdev, adapter);
adapter->netdev = netdev;
*/
if (bond_alb_initialize(bond, (bond->params.mode == BOND_MODE_ALB))) {
/* something went wrong - fail the open operation */
- return -1;
+ return -ENOMEM;
}
INIT_DELAYED_WORK(&bond->alb_work, bond_alb_monitor);
struct sge_fl *fl, int len, int complete)
{
struct rx_sw_desc *sd = &fl->sdesc[fl->cidx];
+ struct port_info *pi = netdev_priv(qs->netdev);
struct sk_buff *skb = NULL;
struct cpl_rx_pkt *cpl;
struct skb_frag_struct *rx_frag;
if (!nr_frags) {
offset = 2 + sizeof(struct cpl_rx_pkt);
- qs->lro_va = sd->pg_chunk.va + 2;
- }
- len -= offset;
+ cpl = qs->lro_va = sd->pg_chunk.va + 2;
- prefetch(qs->lro_va);
+ if ((pi->rx_offload & T3_RX_CSUM) &&
+ cpl->csum_valid && cpl->csum == htons(0xffff)) {
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ qs->port_stats[SGE_PSTAT_RX_CSUM_GOOD]++;
+ } else
+ skb->ip_summed = CHECKSUM_NONE;
+ } else
+ cpl = qs->lro_va;
+
+ len -= offset;
rx_frag += nr_frags;
rx_frag->page = sd->pg_chunk.page;
return;
skb_record_rx_queue(skb, qs - &adap->sge.qs[0]);
- skb->ip_summed = CHECKSUM_UNNECESSARY;
- cpl = qs->lro_va;
if (unlikely(cpl->vlan_valid)) {
- struct net_device *dev = qs->netdev;
- struct port_info *pi = netdev_priv(dev);
struct vlan_group *grp = pi->vlan_grp;
if (likely(grp != NULL)) {
}
}
- if (!buffer_info->dma)
+ if (!buffer_info->dma) {
buffer_info->dma = pci_map_page(pdev,
buffer_info->page, 0,
buffer_info->length,
PCI_DMA_FROMDEVICE);
+ if (pci_dma_mapping_error(pdev, buffer_info->dma)) {
+ put_page(buffer_info->page);
+ dev_kfree_skb(skb);
+ buffer_info->page = NULL;
+ buffer_info->skb = NULL;
+ buffer_info->dma = 0;
+ adapter->alloc_rx_buff_failed++;
+ break; /* while !buffer_info->skb */
+ }
+ }
rx_desc = E1000_RX_DESC(*rx_ring, i);
rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
skb->data,
buffer_info->length,
PCI_DMA_FROMDEVICE);
+ if (pci_dma_mapping_error(pdev, buffer_info->dma)) {
+ dev_kfree_skb(skb);
+ buffer_info->skb = NULL;
+ buffer_info->dma = 0;
+ adapter->alloc_rx_buff_failed++;
+ break; /* while !buffer_info->skb */
+ }
/*
* XXX if it was allocated cleanly it will never map to a
msixbm = E1000_EICR_RX_QUEUE0 << rx_queue;
if (tx_queue > IGB_N0_QUEUE)
msixbm |= E1000_EICR_TX_QUEUE0 << tx_queue;
+ if (!adapter->msix_entries && msix_vector == 0)
+ msixbm |= E1000_EIMS_OTHER;
array_wr32(E1000_MSIXBM(0), msix_vector, msixbm);
q_vector->eims_value = msixbm;
break;
{
struct net_device *netdev = adapter->netdev;
struct pci_dev *pdev = adapter->pdev;
- struct e1000_hw *hw = &adapter->hw;
int err = 0;
if (adapter->msix_entries) {
igb_setup_all_tx_resources(adapter);
igb_setup_all_rx_resources(adapter);
} else {
- switch (hw->mac.type) {
- case e1000_82575:
- wr32(E1000_MSIXBM(0),
- (E1000_EICR_RX_QUEUE0 |
- E1000_EICR_TX_QUEUE0 |
- E1000_EIMS_OTHER));
- break;
- case e1000_82580:
- case e1000_82576:
- wr32(E1000_IVAR0, E1000_IVAR_VALID);
- break;
- default:
- break;
- }
+ igb_assign_vector(adapter->q_vector[0], 0);
}
if (adapter->flags & IGB_FLAG_HAS_MSI) {
}
if (adapter->msix_entries)
igb_configure_msix(adapter);
+ else
+ igb_assign_vector(adapter->q_vector[0], 0);
/* Clear any pending interrupts. */
rd32(E1000_ICR);
/* set time_stamp *before* dma to help avoid a possible race */
buffer_info->time_stamp = jiffies;
buffer_info->next_to_watch = i;
+ buffer_info->mapped_as_page = false;
buffer_info->dma = pci_map_single(pdev, skb->data, len,
PCI_DMA_TODEVICE);
if (pci_dma_mapping_error(pdev, buffer_info->dma))
u32 fctrl_reg;
u32 rmcs_reg;
u32 reg;
+ u32 link_speed = 0;
+ bool link_up;
#ifdef CONFIG_DCB
if (hw->fc.requested_mode == ixgbe_fc_pfc)
goto out;
#endif /* CONFIG_DCB */
+ /*
+ * On 82598 having Rx FC on causes resets while doing 1G
+ * so if it's on turn it off once we know link_speed. For
+ * more details see 82598 Specification update.
+ */
+ hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
+ if (link_up && link_speed == IXGBE_LINK_SPEED_1GB_FULL) {
+ switch (hw->fc.requested_mode) {
+ case ixgbe_fc_full:
+ hw->fc.requested_mode = ixgbe_fc_tx_pause;
+ break;
+ case ixgbe_fc_rx_pause:
+ hw->fc.requested_mode = ixgbe_fc_none;
+ break;
+ default:
+ /* no change */
+ break;
+ }
+ }
+
/* Negotiate the fc mode to use */
ret_val = ixgbe_fc_autoneg(hw);
if (ret_val)
if (adapter->temp_dcb_cfg.bw_percentage[0][bwg_id] !=
adapter->dcb_cfg.bw_percentage[0][bwg_id]) {
- adapter->dcb_set_bitmap |= BIT_PG_RX;
+ adapter->dcb_set_bitmap |= BIT_PG_TX;
adapter->dcb_set_bitmap |= BIT_RESETLINK;
}
}
if (!adapter->dcb_set_bitmap)
return DCB_NO_HW_CHG;
+ ret = ixgbe_copy_dcb_cfg(&adapter->temp_dcb_cfg, &adapter->dcb_cfg,
+ adapter->ring_feature[RING_F_DCB].indices);
+
+ if (ret)
+ return DCB_NO_HW_CHG;
+
/*
* Only take down the adapter if the configuration change
* requires a reset.
}
}
- ret = ixgbe_copy_dcb_cfg(&adapter->temp_dcb_cfg, &adapter->dcb_cfg,
- adapter->ring_feature[RING_F_DCB].indices);
- if (ret) {
- if (adapter->dcb_set_bitmap & BIT_RESETLINK)
- clear_bit(__IXGBE_RESETTING, &adapter->state);
- return DCB_NO_HW_CHG;
- }
-
if (adapter->dcb_cfg.pfc_mode_enable) {
if ((adapter->hw.mac.type != ixgbe_mac_82598EB) &&
(adapter->hw.fc.current_mode != ixgbe_fc_pfc))
ixgbe_unmap_and_free_tx_resource(adapter, tx_buffer_info);
}
- return count;
+ return 0;
}
static void ixgbe_tx_queue(struct ixgbe_adapter *adapter,
struct ixgbe_adapter *adapter = netdev_priv(dev);
int txq = smp_processor_id();
- if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE)
+ if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) {
+ while (unlikely(txq >= dev->real_num_tx_queues))
+ txq -= dev->real_num_tx_queues;
return txq;
+ }
#ifdef IXGBE_FCOE
if ((adapter->flags & IXGBE_FLAG_FCOE_ENABLED) &&
if (err)
goto err_sw_init;
+ /* Make it possible the adapter to be woken up via WOL */
+ if (adapter->hw.mac.type == ixgbe_mac_82599EB)
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0);
+
/*
* If there is a fan on this device and it has failed log the
* failure.
static irqreturn_t ks_irq(int irq, void *pw)
{
- struct ks_net *ks = pw;
- struct net_device *netdev = ks->netdev;
+ struct net_device *netdev = pw;
+ struct ks_net *ks = netdev_priv(netdev);
u16 status;
/*this should be the first in IRQ handler */
netif_wake_queue(adapter->netdev);
clear_bit(__NX_RESETTING, &adapter->state);
-
+ return;
} else {
clear_bit(__NX_RESETTING, &adapter->state);
if (!netxen_nic_reset_context(adapter)) {
netxen_nic_down(adapter, netdev);
+ rtnl_lock();
netxen_nic_detach(adapter);
+ rtnl_unlock();
status = NXRD32(adapter, NETXEN_PEG_HALT_STATUS1);
fail2:
efx_fini_struct(efx);
fail1:
+ WARN_ON(rc > 0);
EFX_LOG(efx, "initialisation failed. rc=%d\n", rc);
free_netdev(net_dev);
return rc;
#define FALCON_BOARD_SFN4111T 0x51
#define FALCON_BOARD_SFN4112F 0x52
+/* Board temperature is about 15°C above ambient when air flow is
+ * limited. */
+#define FALCON_BOARD_TEMP_BIAS 15
+
+/* SFC4000 datasheet says: 'The maximum permitted junction temperature
+ * is 125°C; the thermal design of the environment for the SFC4000
+ * should aim to keep this well below 100°C.' */
+#define FALCON_JUNC_TEMP_MAX 90
+
/*****************************************************************************
* Support for LM87 sensor chip used on several boards
*/
static u8 sfe4002_lm87_channel = 0x03; /* use AIN not FAN inputs */
static const u8 sfe4002_lm87_regs[] = {
- LM87_IN_LIMITS(0, 0x83, 0x91), /* 2.5V: 1.8V +/- 5% */
- LM87_IN_LIMITS(1, 0x51, 0x5a), /* Vccp1: 1.2V +/- 5% */
- LM87_IN_LIMITS(2, 0xb6, 0xca), /* 3.3V: 3.3V +/- 5% */
- LM87_IN_LIMITS(3, 0xb0, 0xc9), /* 5V: 4.6-5.2V */
- LM87_IN_LIMITS(4, 0xb0, 0xe0), /* 12V: 11-14V */
- LM87_IN_LIMITS(5, 0x44, 0x4b), /* Vccp2: 1.0V +/- 5% */
- LM87_AIN_LIMITS(0, 0xa0, 0xb2), /* AIN1: 1.66V +/- 5% */
- LM87_AIN_LIMITS(1, 0x91, 0xa1), /* AIN2: 1.5V +/- 5% */
- LM87_TEMP_INT_LIMITS(10, 60), /* board */
- LM87_TEMP_EXT1_LIMITS(10, 70), /* Falcon */
+ LM87_IN_LIMITS(0, 0x7c, 0x99), /* 2.5V: 1.8V +/- 10% */
+ LM87_IN_LIMITS(1, 0x4c, 0x5e), /* Vccp1: 1.2V +/- 10% */
+ LM87_IN_LIMITS(2, 0xac, 0xd4), /* 3.3V: 3.3V +/- 10% */
+ LM87_IN_LIMITS(3, 0xac, 0xd4), /* 5V: 5.0V +/- 10% */
+ LM87_IN_LIMITS(4, 0xac, 0xe0), /* 12V: 10.8-14V */
+ LM87_IN_LIMITS(5, 0x3f, 0x4f), /* Vccp2: 1.0V +/- 10% */
+ LM87_AIN_LIMITS(0, 0x98, 0xbb), /* AIN1: 1.66V +/- 10% */
+ LM87_AIN_LIMITS(1, 0x8a, 0xa9), /* AIN2: 1.5V +/- 10% */
+ LM87_TEMP_INT_LIMITS(0, 80 + FALCON_BOARD_TEMP_BIAS),
+ LM87_TEMP_EXT1_LIMITS(0, FALCON_JUNC_TEMP_MAX),
0
};
static u8 sfn4112f_lm87_channel = 0x03; /* use AIN not FAN inputs */
static const u8 sfn4112f_lm87_regs[] = {
- LM87_IN_LIMITS(0, 0x83, 0x91), /* 2.5V: 1.8V +/- 5% */
- LM87_IN_LIMITS(1, 0x51, 0x5a), /* Vccp1: 1.2V +/- 5% */
- LM87_IN_LIMITS(2, 0xb6, 0xca), /* 3.3V: 3.3V +/- 5% */
- LM87_IN_LIMITS(4, 0xb0, 0xe0), /* 12V: 11-14V */
- LM87_IN_LIMITS(5, 0x44, 0x4b), /* Vccp2: 1.0V +/- 5% */
- LM87_AIN_LIMITS(1, 0x91, 0xa1), /* AIN2: 1.5V +/- 5% */
- LM87_TEMP_INT_LIMITS(10, 60), /* board */
- LM87_TEMP_EXT1_LIMITS(10, 70), /* Falcon */
+ LM87_IN_LIMITS(0, 0x7c, 0x99), /* 2.5V: 1.8V +/- 10% */
+ LM87_IN_LIMITS(1, 0x4c, 0x5e), /* Vccp1: 1.2V +/- 10% */
+ LM87_IN_LIMITS(2, 0xac, 0xd4), /* 3.3V: 3.3V +/- 10% */
+ LM87_IN_LIMITS(4, 0xac, 0xe0), /* 12V: 10.8-14V */
+ LM87_IN_LIMITS(5, 0x3f, 0x4f), /* Vccp2: 1.0V +/- 10% */
+ LM87_AIN_LIMITS(1, 0x8a, 0xa9), /* AIN2: 1.5V +/- 10% */
+ LM87_TEMP_INT_LIMITS(0, 60 + FALCON_BOARD_TEMP_BIAS),
+ LM87_TEMP_EXT1_LIMITS(0, FALCON_JUNC_TEMP_MAX),
0
};
efx_dword_t reg;
/* Check for a reboot atomically with respect to efx_mcdi_copyout() */
- rc = efx_mcdi_poll_reboot(efx);
+ rc = -efx_mcdi_poll_reboot(efx);
if (rc)
goto out;
falcon_board(efx)->type->init_phy(efx);
- return rc;
+ return 0;
fail:
EFX_ERR(efx, "PHY reset timed out\n");
static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2, u16 *slot)
{
struct sky2_tx_le *le = sky2->tx_le + *slot;
- struct tx_ring_info *re = sky2->tx_ring + *slot;
*slot = RING_NEXT(*slot, sky2->tx_ring_size);
- re->flags = 0;
- re->skb = NULL;
le->ctrl = 0;
return le;
}
return count;
}
-static void sky2_tx_unmap(struct pci_dev *pdev,
- const struct tx_ring_info *re)
+static void sky2_tx_unmap(struct pci_dev *pdev, struct tx_ring_info *re)
{
if (re->flags & TX_MAP_SINGLE)
pci_unmap_single(pdev, pci_unmap_addr(re, mapaddr),
pci_unmap_page(pdev, pci_unmap_addr(re, mapaddr),
pci_unmap_len(re, maplen),
PCI_DMA_TODEVICE);
+ re->flags = 0;
}
/*
dev->stats.tx_packets++;
dev->stats.tx_bytes += skb->len;
+ re->skb = NULL;
dev_kfree_skb_any(skb);
sky2->tx_next = RING_NEXT(idx, sky2->tx_ring_size);
if (retval) {
printk(KERN_ERR "starfire: Failed to load firmware \"%s\"\n",
FIRMWARE_RX);
- return retval;
+ goto out_init;
}
if (fw_rx->size % 4) {
printk(KERN_ERR "starfire: bogus length %zu in \"%s\"\n",
release_firmware(fw_tx);
out_rx:
release_firmware(fw_rx);
+out_init:
+ if (retval)
+ netdev_close(dev);
return retval;
}
/* Transmit complete. */
lp->lstats.tx_ints++;
tc35815_txdone(dev);
- netif_wake_queue(dev);
if (ret < 0)
ret = 0;
}
static const struct driver_info cdc_info = {
.description = "CDC Ethernet Device",
- .flags = FLAG_ETHER | FLAG_LINK_INTR,
+ .flags = FLAG_ETHER,
// .check_connect = cdc_check_connect,
.bind = cdc_bind,
.unbind = usbnet_cdc_unbind,
USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1049, USB_CLASS_COMM,
USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
.driver_info = (unsigned long) &mbm_info,
+}, {
+ /* Ericsson C3607w ver 2 */
+ USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x190b, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &mbm_info,
}, {
/* Toshiba F3507g */
USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x130b, USB_CLASS_COMM,
/**
* tx_srv - transmit interrupt service
* @vptr; Velocity
- * @status:
*
* Scan the queues looking for transmitted packets that
* we can complete and clean up. Update any statistics as
* necessary/
*/
-static int velocity_tx_srv(struct velocity_info *vptr, u32 status)
+static int velocity_tx_srv(struct velocity_info *vptr)
{
struct tx_desc *td;
int qnum;
/**
* velocity_rx_srv - service RX interrupt
* @vptr: velocity
- * @status: adapter status (unused)
*
* Walk the receive ring of the velocity adapter and remove
* any received packets from the receive queue. Hand the ring
* slots back to the adapter for reuse.
*/
-static int velocity_rx_srv(struct velocity_info *vptr, int status,
- int budget_left)
+static int velocity_rx_srv(struct velocity_info *vptr, int budget_left)
{
struct net_device_stats *stats = &vptr->dev->stats;
int rd_curr = vptr->rx.curr;
struct velocity_info *vptr = container_of(napi,
struct velocity_info, napi);
unsigned int rx_done;
- u32 isr_status;
-
- spin_lock(&vptr->lock);
- isr_status = mac_read_isr(vptr->mac_regs);
-
- /* Ack the interrupt */
- mac_write_isr(vptr->mac_regs, isr_status);
- if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI)))
- velocity_error(vptr, isr_status);
+ unsigned long flags;
+ spin_lock_irqsave(&vptr->lock, flags);
/*
* Do rx and tx twice for performance (taken from the VIA
* out-of-tree driver).
*/
- rx_done = velocity_rx_srv(vptr, isr_status, budget / 2);
- velocity_tx_srv(vptr, isr_status);
- rx_done += velocity_rx_srv(vptr, isr_status, budget - rx_done);
- velocity_tx_srv(vptr, isr_status);
-
- spin_unlock(&vptr->lock);
+ rx_done = velocity_rx_srv(vptr, budget / 2);
+ velocity_tx_srv(vptr);
+ rx_done += velocity_rx_srv(vptr, budget - rx_done);
+ velocity_tx_srv(vptr);
/* If budget not fully consumed, exit the polling mode */
if (rx_done < budget) {
napi_complete(napi);
mac_enable_int(vptr->mac_regs);
}
+ spin_unlock_irqrestore(&vptr->lock, flags);
return rx_done;
}
return IRQ_NONE;
}
+ /* Ack the interrupt */
+ mac_write_isr(vptr->mac_regs, isr_status);
+
if (likely(napi_schedule_prep(&vptr->napi))) {
mac_disable_int(vptr->mac_regs);
__napi_schedule(&vptr->napi);
}
+
+ if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI)))
+ velocity_error(vptr, isr_status);
+
spin_unlock(&vptr->lock);
return IRQ_HANDLED;
velocity_init_registers(vptr, VELOCITY_INIT_WOL);
mac_disable_int(vptr->mac_regs);
- velocity_tx_srv(vptr, 0);
+ velocity_tx_srv(vptr);
for (i = 0; i < vptr->tx.numq; i++) {
if (vptr->tx.used[i])
{
struct velocity_info *vptr = netdev_priv(dev);
int max_us = 0x3f * 64;
+ unsigned long flags;
/* 6 bits of */
if (ecmd->tx_coalesce_usecs > max_us)
ecmd->tx_coalesce_usecs);
/* Setup the interrupt suppression and queue timers */
+ spin_lock_irqsave(&vptr->lock, flags);
mac_disable_int(vptr->mac_regs);
setup_adaptive_interrupts(vptr);
setup_queue_timers(vptr);
mac_write_int_mask(vptr->int_mask, vptr->mac_regs);
mac_clear_isr(vptr->mac_regs);
mac_enable_int(vptr->mac_regs);
+ spin_unlock_irqrestore(&vptr->lock, flags);
return 0;
}
}
}
-static void ath9k_hw_init_11a_eeprom_fix(struct ath_hw *ah)
+static void ath9k_hw_init_eeprom_fix(struct ath_hw *ah)
{
u32 i, j;
- if ((ah->hw_version.devid == AR9280_DEVID_PCI) &&
- test_bit(ATH9K_MODE_11A, ah->caps.wireless_modes)) {
+ if (ah->hw_version.devid == AR9280_DEVID_PCI) {
/* EEPROM Fixup */
for (i = 0; i < ah->iniModes.ia_rows; i++) {
if (r)
return r;
- ath9k_hw_init_11a_eeprom_fix(ah);
+ ath9k_hw_init_eeprom_fix(ah);
r = ath9k_hw_init_macaddr(ah);
if (r) {
(sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT)) {
ath9k_ps_wakeup(sc);
ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
- ath_beacon_return(sc, avp);
ath9k_ps_restore(sc);
}
+ ath_beacon_return(sc, avp);
sc->sc_flags &= ~SC_OP_BEACONS;
for (i = 0; i < ARRAY_SIZE(sc->beacon.bslot); i++) {
bf->bf_frmlen -= padsize;
}
- if (conf_is_ht(&hw->conf) && !is_pae(skb))
+ if (conf_is_ht(&hw->conf))
bf->bf_state.bf_type |= BUF_HT;
bf->bf_flags = setup_tx_flags(sc, skb, txctl->txq);
goto tx_done;
}
- if (tx_info->flags & IEEE80211_TX_CTL_AMPDU) {
+ if ((tx_info->flags & IEEE80211_TX_CTL_AMPDU) && !is_pae(skb)) {
/*
* Try aggregation if it's a unicast data frame
* and the destination is HT capable.
#define B43_MMIO_TSF_2 0x636 /* core rev < 3 only */
#define B43_MMIO_TSF_3 0x638 /* core rev < 3 only */
#define B43_MMIO_RNG 0x65A
+#define B43_MMIO_IFSSLOT 0x684 /* Interframe slot time */
#define B43_MMIO_IFSCTL 0x688 /* Interframe space control */
#define B43_MMIO_IFSCTL_USE_EDCF 0x0004
#define B43_MMIO_POWERUP_DELAY 0x6A8
static void b43_set_slot_time(struct b43_wldev *dev, u16 slot_time)
{
/* slot_time is in usec. */
- if (dev->phy.type != B43_PHYTYPE_G)
+ /* This test used to exit for all but a G PHY. */
+ if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ)
return;
- b43_write16(dev, 0x684, 510 + slot_time);
- b43_shm_write16(dev, B43_SHM_SHARED, 0x0010, slot_time);
+ b43_write16(dev, B43_MMIO_IFSSLOT, 510 + slot_time);
+ /* Shared memory location 0x0010 is the slot time and should be
+ * set to slot_time; however, this register is initially 0 and changing
+ * the value adversely affects the transmit rate for BCM4311
+ * devices. Until this behavior is unterstood, delete this step
+ *
+ * b43_shm_write16(dev, B43_SHM_SHARED, 0x0010, slot_time);
+ */
}
static void b43_short_slot_timing_enable(struct b43_wldev *dev)
IWL_DEBUG_TX_REPLY(priv, "Retry scheduler reclaim scd_ssn "
"%d index %d\n", scd_ssn , index);
freed = iwl_tx_queue_reclaim(priv, txq_id, index);
- priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
+ iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
if (priv->mac80211_registered &&
(iwl_queue_space(&txq->q) > txq->q.low_mark) &&
scd_ssn , index, txq_id, txq->swq_id);
freed = iwl_tx_queue_reclaim(priv, txq_id, index);
- priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
+ iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
if (priv->mac80211_registered &&
(iwl_queue_space(&txq->q) > txq->q.low_mark) &&
tx_resp->failure_frame);
freed = iwl_tx_queue_reclaim(priv, txq_id, index);
- if (ieee80211_is_data_qos(tx_resp->frame_ctrl))
- priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
+ iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
if (priv->mac80211_registered &&
(iwl_queue_space(&txq->q) > txq->q.low_mark))
iwl_wake_queue(priv, txq_id);
}
- if (ieee80211_is_data_qos(tx_resp->frame_ctrl))
- iwl_txq_check_empty(priv, sta_id, tid, txq_id);
+ iwl_txq_check_empty(priv, sta_id, tid, txq_id);
if (iwl_check_bits(status, TX_ABORT_REQUIRED_MSK))
IWL_ERR(priv, "TODO: Implement Tx ABORT REQUIRED!!!\n");
priv->staging_rxon.flags = 0;
iwl_set_rxon_channel(priv, conf->channel);
+ iwl_set_rxon_ht(priv, ht_conf);
iwl_set_flags_for_band(priv, conf->channel->band);
spin_unlock_irqrestore(&priv->lock, flags);
int iwl_hw_tx_queue_init(struct iwl_priv *priv,
struct iwl_tx_queue *txq);
int iwl_txq_update_write_ptr(struct iwl_priv *priv, struct iwl_tx_queue *txq);
+void iwl_free_tfds_in_queue(struct iwl_priv *priv,
+ int sta_id, int tid, int freed);
int iwl_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq,
int slots_num, u32 txq_id);
void iwl_tx_queue_free(struct iwl_priv *priv, int txq_id);
if (ieee80211_is_mgmt(fc) ||
ieee80211_has_protected(fc) ||
ieee80211_has_morefrags(fc) ||
- le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG)
+ le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG ||
+ (ieee80211_is_data_qos(fc) &&
+ *ieee80211_get_qos_ctl(hdr) &
+ IEEE80211_QOS_CONTROL_A_MSDU_PRESENT))
ret = skb_linearize(skb);
else
ret = __pskb_pull_tail(skb, min_t(u16, IWL_LINK_HDR_MAX, len)) ?
}
EXPORT_SYMBOL(iwl_add_station);
-static void iwl_sta_ucode_deactivate(struct iwl_priv *priv, const char *addr)
+static void iwl_sta_ucode_deactivate(struct iwl_priv *priv, const u8 *addr)
{
unsigned long flags;
u8 sta_id = iwl_find_station(priv, addr);
{
struct iwl_rem_sta_cmd *rm_sta =
(struct iwl_rem_sta_cmd *)cmd->cmd.payload;
- const char *addr = rm_sta->addr;
+ const u8 *addr = rm_sta->addr;
if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) {
IWL_ERR(priv, "Bad return from REPLY_REMOVE_STA (0x%08X)\n",
EXPORT_SYMBOL(iwl_txq_update_write_ptr);
+void iwl_free_tfds_in_queue(struct iwl_priv *priv,
+ int sta_id, int tid, int freed)
+{
+ if (priv->stations[sta_id].tid[tid].tfds_in_queue >= freed)
+ priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
+ else {
+ IWL_ERR(priv, "free more than tfds_in_queue (%u:%d)\n",
+ priv->stations[sta_id].tid[tid].tfds_in_queue,
+ freed);
+ priv->stations[sta_id].tid[tid].tfds_in_queue = 0;
+ }
+}
+EXPORT_SYMBOL(iwl_free_tfds_in_queue);
+
/**
* iwl_tx_queue_free - Deallocate DMA queue.
* @txq: Transmit queue to deallocate.
struct iwl_queue *q = &txq->q;
struct iwl_tx_info *tx_info;
int nfreed = 0;
+ struct ieee80211_hdr *hdr;
if ((index >= q->n_bd) || (iwl_queue_used(q, index) == 0)) {
IWL_ERR(priv, "Read index for DMA queue txq id (%d), index %d, "
tx_info = &txq->txb[txq->q.read_ptr];
iwl_tx_status(priv, tx_info->skb[0]);
+
+ hdr = (struct ieee80211_hdr *)tx_info->skb[0]->data;
+ if (hdr && ieee80211_is_data_qos(hdr->frame_control))
+ nfreed++;
tx_info->skb[0] = NULL;
if (priv->cfg->ops->lib->txq_inval_byte_cnt_tbl)
priv->cfg->ops->lib->txq_inval_byte_cnt_tbl(priv, txq);
priv->cfg->ops->lib->txq_free_tfd(priv, txq);
- nfreed++;
}
return nfreed;
}
if (txq->q.read_ptr != (ba_resp_scd_ssn & 0xff)) {
/* calculate mac80211 ampdu sw queue to wake */
int freed = iwl_tx_queue_reclaim(priv, scd_flow, index);
- priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
+ iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
if ((iwl_queue_space(&txq->q) > txq->q.low_mark) &&
priv->mac80211_registered &&
}
bss->bss = kzalloc(bss_len, GFP_KERNEL);
- if (!bss) {
+ if (!bss->bss) {
kfree(bss);
IWM_ERR(iwm, "Couldn't allocate bss\n");
return -ENOMEM;
/* Sitecom */
{USB_DEVICE(0x0df6, 0x000d), .driver_info = DEVICE_RTL8187},
{USB_DEVICE(0x0df6, 0x0028), .driver_info = DEVICE_RTL8187B},
+ {USB_DEVICE(0x0df6, 0x0029), .driver_info = DEVICE_RTL8187B},
/* Sphairon Access Systems GmbH */
{USB_DEVICE(0x114B, 0x0150), .driver_info = DEVICE_RTL8187},
/* Dick Smith Electronics */
-ret_val);
goto acpiphp_bus_add_out;
}
- /*
- * try to start anyway. We could have failed to add
- * simply because this bus had previously been added
- * on another add. Don't bother with the return value
- * we just keep going.
- */
ret_val = acpi_bus_start(device);
acpiphp_bus_add_out:
dev->irq = irq;
}
-static void set_pcie_port_type(struct pci_dev *pdev)
+void set_pcie_port_type(struct pci_dev *pdev)
{
int pos;
u16 reg16;
pdev->pcie_type = (reg16 & PCI_EXP_FLAGS_TYPE) >> 4;
}
-static void set_pcie_hotplug_bridge(struct pci_dev *pdev)
+void set_pcie_hotplug_bridge(struct pci_dev *pdev)
{
int pos;
u16 reg16;
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_868, quirk_s3_64M);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_968, quirk_s3_64M);
+/*
+ * Some CS5536 BIOSes (for example, the Soekris NET5501 board w/ comBIOS
+ * ver. 1.33 20070103) don't set the correct ISA PCI region header info.
+ * BAR0 should be 8 bytes; instead, it may be set to something like 8k
+ * (which conflicts w/ BAR1's memory range).
+ */
+static void __devinit quirk_cs5536_vsa(struct pci_dev *dev)
+{
+ if (pci_resource_len(dev, 0) != 8) {
+ struct resource *res = &dev->resource[0];
+ res->end = res->start + 8 - 1;
+ dev_info(&dev->dev, "CS5536 ISA bridge bug detected "
+ "(incorrect header); workaround applied.\n");
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, quirk_cs5536_vsa);
+
static void __devinit quirk_io_region(struct pci_dev *dev, unsigned region,
unsigned size, int nr, const char *name)
{
acer_backlight_device = bd;
bd->props.power = FB_BLANK_UNBLANK;
- bd->props.brightness = max_brightness;
+ bd->props.brightness = read_brightness(bd);
bd->props.max_brightness = max_brightness;
backlight_update_status(bd);
return 0;
case TPACPI_THERMAL_ACPI_TMP07:
case TPACPI_THERMAL_ACPI_UPDT:
sysfs_remove_group(&tpacpi_sensors_pdev->dev.kobj,
- &thermal_temp_input16_group);
+ &thermal_temp_input8_group);
break;
case TPACPI_THERMAL_NONE:
default:
dev_err(&dev->dev, "Do not pass platform_data through "
"wm97xx_bat_set_pdata!\n");
return -EINVAL;
- } else
- pdata = wmdata->batt_pdata;
+ }
+
+ if (!wmdata) {
+ dev_err(&dev->dev, "No platform data supplied\n");
+ return -EINVAL;
+ }
+
+ pdata = wmdata->batt_pdata;
if (dev->id != -1)
return -EINVAL;
static void print_constraints(struct regulator_dev *rdev)
{
struct regulation_constraints *constraints = rdev->constraints;
- char buf[80];
+ char buf[80] = "";
int count = 0;
int ret;
if (vol_map[val] >= min_vol)
break;
- if (vol_map[val] > max_vol)
+ if (val > LDO_VOL_MAX_IDX || vol_map[val] > max_vol)
return -EINVAL;
return lp3971_set_bits(lp3971, LP3971_LDO_VOL_CONTR_REG(ldo),
if (vol_map[val] >= min_vol)
break;
- if (vol_map[val] > max_vol)
+ if (val > BUCK_TARGET_VOL_MAX_IDX || vol_map[val] > max_vol)
return -EINVAL;
ret = lp3971_set_bits(lp3971, LP3971_BUCK_TARGET_VOL1_REG(buck),
led->isink_init.consumer_supplies = &led->isink_consumer;
led->isink_init.constraints.min_uA = 0;
led->isink_init.constraints.max_uA = pdata->max_uA;
- led->isink_init.constraints.valid_ops_mask = REGULATOR_CHANGE_CURRENT;
+ led->isink_init.constraints.valid_ops_mask
+ = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS;
led->isink_init.constraints.valid_modes_mask = REGULATOR_MODE_NORMAL;
ret = wm8350_register_regulator(wm8350, isink, &led->isink_init);
if (ret != 0) {
led->dcdc_init.num_consumer_supplies = 1;
led->dcdc_init.consumer_supplies = &led->dcdc_consumer;
led->dcdc_init.constraints.valid_modes_mask = REGULATOR_MODE_NORMAL;
+ led->dcdc_init.constraints.valid_ops_mask = REGULATOR_CHANGE_STATUS;
ret = wm8350_register_regulator(wm8350, dcdc, &led->dcdc_init);
if (ret != 0) {
platform_device_put(pdev);
}
/* Disabling calibration mode */
- if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_CAL)
+ if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_CAL) {
i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
fm3130->regs[FM3130_RTC_CONTROL] &
~(FM3130_RTC_CONTROL_BIT_CAL));
dev_warn(&client->dev, "Disabling calibration mode!\n");
+ }
/* Disabling read and write modes */
if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_WRITE ||
- fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_READ)
+ fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_READ) {
i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
fm3130->regs[FM3130_RTC_CONTROL] &
~(FM3130_RTC_CONTROL_BIT_READ |
FM3130_RTC_CONTROL_BIT_WRITE));
dev_warn(&client->dev, "Disabling READ or WRITE mode!\n");
+ }
/* oscillator off? turn it on, so clock can tick. */
if (fm3130->regs[FM3130_CAL_CONTROL] & FM3130_CAL_CONTROL_BIT_nOSCEN)
qdio_siga_sync_q(q);
get_buf_state(q, q->first_to_check, &state, 0);
- if (state == SLSB_P_INPUT_PRIMED)
+ if (state == SLSB_P_INPUT_PRIMED || state == SLSB_P_INPUT_ERROR)
/* more work coming */
return 0;
qdio_handle_activate_check(cdev, intparm, cstat,
dstat);
break;
+ case QDIO_IRQ_STATE_STOPPED:
+ break;
default:
WARN_ON(1);
}
{
struct fc_bsg_job *job = data;
struct zfcp_fsf_ct_els *zfcp_ct_els = job->dd_data;
- int status = zfcp_ct_els->status;
- int reply_status;
+ struct fc_bsg_reply *jr = job->reply;
- reply_status = status ? FC_CTELS_STATUS_REJECT : FC_CTELS_STATUS_OK;
- job->reply->reply_data.ctels_reply.status = reply_status;
- job->reply->reply_payload_rcv_len = job->reply_payload.payload_len;
+ jr->reply_payload_rcv_len = job->reply_payload.payload_len;
+ jr->reply_data.ctels_reply.status = FC_CTELS_STATUS_OK;
+ jr->result = zfcp_ct_els->status ? -EIO : 0;
job->job_done(job);
}
if (info->scsi.phase == PHASE_IDLE)
fas216_kick(info);
- mod_timer(&info->eh_timer, 30 * HZ);
+ mod_timer(&info->eh_timer, jiffies + 30 * HZ);
spin_unlock_irqrestore(&info->host_lock, flags);
/*
fcoe_interface_cleanup(fcoe);
rtnl_unlock();
fcoe_if_destroy(fcoe->ctlr.lp);
+ module_put(THIS_MODULE);
+
out_putdev:
dev_put(netdev);
out_nodev:
}
#endif
+ if (!try_module_get(THIS_MODULE)) {
+ rc = -EINVAL;
+ goto out_nomod;
+ }
+
rtnl_lock();
netdev = fcoe_if_to_netdev(buffer);
if (!netdev) {
if (!fcoe_link_ok(lport))
fcoe_ctlr_link_up(&fcoe->ctlr);
- rc = 0;
-out_free:
/*
* Release from init in fcoe_interface_create(), on success lport
* should be holding a reference taken in fcoe_if_create().
*/
fcoe_interface_put(fcoe);
+ dev_put(netdev);
+ rtnl_unlock();
+ mutex_unlock(&fcoe_config_mutex);
+
+ return 0;
+out_free:
+ fcoe_interface_put(fcoe);
out_putdev:
dev_put(netdev);
out_nodev:
rtnl_unlock();
+ module_put(THIS_MODULE);
+out_nomod:
mutex_unlock(&fcoe_config_mutex);
return rc;
}
next_timer = fip->ctlr_ka_time;
if (time_after_eq(jiffies, fip->port_ka_time)) {
- fip->port_ka_time += jiffies +
+ fip->port_ka_time = jiffies +
msecs_to_jiffies(FIP_VN_KA_PERIOD);
fip->send_port_ka = 1;
}
fc_exch_setup_hdr(ep, fp, ep->f_ctl);
sp->cnt++;
- if (ep->xid <= lport->lro_xid)
+ if (ep->xid <= lport->lro_xid && fh->fh_r_ctl == FC_RCTL_DD_UNSOL_CMD)
fc_fcp_ddp_setup(fr_fsp(fp), ep->xid);
if (unlikely(lport->tt.frame_send(lport, fp)))
{
struct fc_lport *lport;
- if (!fsp)
- return;
-
lport = fsp->lp;
if ((fsp->req_flags & FC_SRB_READ) &&
(lport->lro_enabled) && (lport->tt.ddp_setup)) {
u32 did;
job->reply->reply_payload_rcv_len = 0;
- rsp->resid_len = job->reply_payload.payload_len;
+ if (rsp)
+ rsp->resid_len = job->reply_payload.payload_len;
mutex_lock(&lport->lp_mutex);
tov = ntohl(plp->fl_csp.sp_e_d_tov);
if (ntohs(plp->fl_csp.sp_features) & FC_SP_FT_EDTR)
- tov /= 1000;
+ tov /= 1000000;
if (tov > rdata->e_d_tov)
rdata->e_d_tov = tov;
csp_seq = ntohs(plp->fl_csp.sp_tot_seq);
if (r2t == NULL) {
if (kfifo_out(&tcp_task->r2tqueue,
(void *)&tcp_task->r2t, sizeof(void *)) !=
- sizeof(void *)) {
- WARN_ONCE(1, "unexpected fifo state");
+ sizeof(void *))
r2t = NULL;
- }
-
- r2t = tcp_task->r2t;
+ else
+ r2t = tcp_task->r2t;
}
spin_unlock_bh(&session->lock);
}
compat_alloc_user_space(sizeof(struct megasas_iocpacket));
int i;
int error = 0;
+ compat_uptr_t ptr;
if (clear_user(ioc, sizeof(*ioc)))
return -EFAULT;
copy_in_user(&ioc->sge_count, &cioc->sge_count, sizeof(u32)))
return -EFAULT;
- for (i = 0; i < MAX_IOCTL_SGE; i++) {
- compat_uptr_t ptr;
+ /*
+ * The sense_ptr is used in megasas_mgmt_fw_ioctl only when
+ * sense_len is not null, so prepare the 64bit value under
+ * the same condition.
+ */
+ if (ioc->sense_len) {
+ void __user **sense_ioc_ptr =
+ (void __user **)(ioc->frame.raw + ioc->sense_off);
+ compat_uptr_t *sense_cioc_ptr =
+ (compat_uptr_t *)(cioc->frame.raw + cioc->sense_off);
+ if (get_user(ptr, sense_cioc_ptr) ||
+ put_user(compat_ptr(ptr), sense_ioc_ptr))
+ return -EFAULT;
+ }
+ for (i = 0; i < MAX_IOCTL_SGE; i++) {
if (get_user(ptr, &cioc->sgl[i].iov_base) ||
put_user(compat_ptr(ptr), &ioc->sgl[i].iov_base) ||
copy_in_user(&ioc->sgl[i].iov_len,
extern void qla25xx_wrt_req_reg(struct qla_hw_data *, uint16_t, uint16_t);
extern void qla25xx_wrt_rsp_reg(struct qla_hw_data *, uint16_t, uint16_t);
extern void qla24xx_wrt_rsp_reg(struct qla_hw_data *, uint16_t, uint16_t);
-extern struct scsi_qla_host * qla25xx_get_host(struct rsp_que *);
#endif /* _QLA_GBL_H */
struct rsp_que *rsp;
struct device_reg_24xx __iomem *reg;
struct scsi_qla_host *vha;
+ unsigned long flags;
rsp = (struct rsp_que *) dev_id;
if (!rsp) {
ha = rsp->hw;
reg = &ha->iobase->isp24;
- spin_lock_irq(&ha->hardware_lock);
+ spin_lock_irqsave(&ha->hardware_lock, flags);
- vha = qla25xx_get_host(rsp);
+ vha = pci_get_drvdata(ha->pdev);
qla24xx_process_response_queue(vha, rsp);
if (!ha->flags.disable_msix_handshake) {
WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_INT);
RD_REG_DWORD_RELAXED(®->hccr);
}
- spin_unlock_irq(&ha->hardware_lock);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
return IRQ_HANDLED;
}
struct qla_hw_data *ha;
struct rsp_que *rsp;
struct device_reg_24xx __iomem *reg;
+ unsigned long flags;
rsp = (struct rsp_que *) dev_id;
if (!rsp) {
/* Clear the interrupt, if enabled, for this response queue */
if (rsp->options & ~BIT_6) {
reg = &ha->iobase->isp24;
- spin_lock_irq(&ha->hardware_lock);
+ spin_lock_irqsave(&ha->hardware_lock, flags);
WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_INT);
RD_REG_DWORD_RELAXED(®->hccr);
- spin_unlock_irq(&ha->hardware_lock);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
queue_work_on((int) (rsp->id - 1), ha->wq, &rsp->q_work);
uint32_t stat;
uint32_t hccr;
uint16_t mb[4];
+ unsigned long flags;
rsp = (struct rsp_que *) dev_id;
if (!rsp) {
reg = &ha->iobase->isp24;
status = 0;
- spin_lock_irq(&ha->hardware_lock);
+ spin_lock_irqsave(&ha->hardware_lock, flags);
vha = pci_get_drvdata(ha->pdev);
do {
stat = RD_REG_DWORD(®->host_status);
}
WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_INT);
} while (0);
- spin_unlock_irq(&ha->hardware_lock);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) &&
(status & MBX_INTERRUPT) && ha->flags.mbox_int) {
msix->rsp = rsp;
return ret;
}
-
-struct scsi_qla_host *
-qla25xx_get_host(struct rsp_que *rsp)
-{
- srb_t *sp;
- struct qla_hw_data *ha = rsp->hw;
- struct scsi_qla_host *vha = NULL;
- struct sts_entry_24xx *pkt;
- struct req_que *req;
- uint16_t que;
- uint32_t handle;
-
- pkt = (struct sts_entry_24xx *) rsp->ring_ptr;
- que = MSW(pkt->handle);
- handle = (uint32_t) LSW(pkt->handle);
- req = ha->req_q_map[que];
- if (handle < MAX_OUTSTANDING_COMMANDS) {
- sp = req->outstanding_cmds[handle];
- if (sp)
- return sp->fcport->vha;
- else
- goto base_que;
- }
-base_que:
- vha = pci_get_drvdata(ha->pdev);
- return vha;
-}
static void qla_do_work(struct work_struct *work)
{
+ unsigned long flags;
struct rsp_que *rsp = container_of(work, struct rsp_que, q_work);
struct scsi_qla_host *vha;
+ struct qla_hw_data *ha = rsp->hw;
- spin_lock_irq(&rsp->hw->hardware_lock);
- vha = qla25xx_get_host(rsp);
+ spin_lock_irqsave(&rsp->hw->hardware_lock, flags);
+ vha = pci_get_drvdata(ha->pdev);
qla24xx_process_response_queue(vha, rsp);
- spin_unlock_irq(&rsp->hw->hardware_lock);
+ spin_unlock_irqrestore(&rsp->hw->hardware_lock, flags);
}
/* create response queue */
#define PASS_LIMIT 256
+#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
+
+
/*
* We default to IRQ0 for the "no irq" hack. Some
* machine types want others as well - they're free
up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
spin_unlock_irqrestore(&up->port.lock, flags);
- return lsr & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
+ return (lsr & BOTH_EMPTY) == BOTH_EMPTY ? TIOCSER_TEMT : 0;
}
static unsigned int serial8250_get_mctrl(struct uart_port *port)
spin_unlock_irqrestore(&up->port.lock, flags);
}
-#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
-
/*
* Wait for transmitter & holding register to empty
*/
spin_unlock_irqrestore(&port->lock, flags);
}
-static int __init ulite_console_setup(struct console *co, char *options)
+static int __devinit ulite_console_setup(struct console *co, char *options)
{
struct uart_port *port;
int baud = 9600;
int edge;
/*
- * CPOL CPHA TSCKIZ RSCKIZ TEDG REDG(!)
- * 0 0 10 10 1 0
- * 0 1 10 10 0 1
- * 1 0 11 11 0 1
- * 1 1 11 11 1 0
- *
- * (!) Note: REDG is inverted recommended data sheet setting
+ * CPOL CPHA TSCKIZ RSCKIZ TEDG REDG
+ * 0 0 10 10 1 1
+ * 0 1 10 10 0 0
+ * 1 0 11 11 0 0
+ * 1 1 11 11 1 1
*/
-
sh_msiof_write(p, FCTR, 0);
sh_msiof_write(p, TMDR1, 0xe2000005 | (lsb_first << 24));
sh_msiof_write(p, RMDR1, 0x22000005 | (lsb_first << 24));
edge = cpol ? cpha : !cpha;
tmp |= edge << 27; /* TEDG */
- tmp |= !edge << 26; /* REDG */
+ tmp |= edge << 26; /* REDG */
tmp |= (tx_hi_z ? 2 : 0) << 22; /* TXDIZ */
sh_msiof_write(p, CTR, tmp);
}
#endif
break;
case SSB_BUSTYPE_SDIO:
-#ifdef CONFIG_SSB_SDIO
- sdev->irq = bus->host_sdio->dev.irq;
+#ifdef CONFIG_SSB_SDIOHOST
dev->parent = &bus->host_sdio->dev;
#endif
break;
source "drivers/gpu/drm/vmwgfx/Kconfig"
-source "drivers/gpu/drm/radeon/Kconfig"
-
source "drivers/gpu/drm/nouveau/Kconfig"
source "drivers/staging/octeon/Kconfig"
void __user *addr = as->userurb;
unsigned int i;
- if (as->userbuffer)
+ if (as->userbuffer && urb->actual_length)
if (copy_to_user(as->userbuffer, urb->transfer_buffer,
- urb->transfer_buffer_length))
+ urb->actual_length))
goto err_out;
if (put_user(as->status, &userurb->status))
goto err_out;
}
}
- free_async(as);
-
if (put_user(addr, (void __user * __user *)arg))
return -EFAULT;
return 0;
err_out:
- free_async(as);
return -EFAULT;
}
static int proc_reapurb(struct dev_state *ps, void __user *arg)
{
struct async *as = reap_as(ps);
- if (as)
- return processcompl(as, (void __user * __user *)arg);
+ if (as) {
+ int retval = processcompl(as, (void __user * __user *)arg);
+ free_async(as);
+ return retval;
+ }
if (signal_pending(current))
return -EINTR;
return -EIO;
static int proc_reapurbnonblock(struct dev_state *ps, void __user *arg)
{
+ int retval;
struct async *as;
- if (!(as = async_getcompleted(ps)))
- return -EAGAIN;
- return processcompl(as, (void __user * __user *)arg);
+ as = async_getcompleted(ps);
+ retval = -EAGAIN;
+ if (as) {
+ retval = processcompl(as, (void __user * __user *)arg);
+ free_async(as);
+ }
+ return retval;
}
#ifdef CONFIG_COMPAT
void __user *addr = as->userurb;
unsigned int i;
- if (as->userbuffer)
+ if (as->userbuffer && urb->actual_length)
if (copy_to_user(as->userbuffer, urb->transfer_buffer,
- urb->transfer_buffer_length))
+ urb->actual_length))
return -EFAULT;
if (put_user(as->status, &userurb->status))
return -EFAULT;
}
}
- free_async(as);
if (put_user(ptr_to_compat(addr), (u32 __user *)arg))
return -EFAULT;
return 0;
static int proc_reapurb_compat(struct dev_state *ps, void __user *arg)
{
struct async *as = reap_as(ps);
- if (as)
- return processcompl_compat(as, (void __user * __user *)arg);
+ if (as) {
+ int retval = processcompl_compat(as, (void __user * __user *)arg);
+ free_async(as);
+ return retval;
+ }
if (signal_pending(current))
return -EINTR;
return -EIO;
static int proc_reapurbnonblock_compat(struct dev_state *ps, void __user *arg)
{
+ int retval;
struct async *as;
- if (!(as = async_getcompleted(ps)))
- return -EAGAIN;
- return processcompl_compat(as, (void __user * __user *)arg);
+ retval = -EAGAIN;
+ as = async_getcompleted(ps);
+ if (as) {
+ retval = processcompl_compat(as, (void __user * __user *)arg);
+ free_async(as);
+ }
+ return retval;
}
* b15: bmType (0 == data)
*/
len = skb->len;
- put_unaligned_le16((len & 0x3FFF) | BIT(14), skb_push(skb, 2));
+ put_unaligned_le16(len & 0x3FFF, skb_push(skb, 2));
/* add a zero-length EEM packet, if needed */
if (padlen)
}
/* validate CRC */
- crc = get_unaligned_le32(skb->data + len - ETH_FCS_LEN);
if (header & BIT(14)) {
crc = get_unaligned_le32(skb->data + len
- ETH_FCS_LEN);
#if defined USB_ETH_RNDIS
# undef USB_ETH_RNDIS
#endif
-#ifdef CONFIG_USB_ETH_RNDIS
+#ifdef CONFIG_USB_G_MULTI_RNDIS
# define USB_ETH_RNDIS y
#endif
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
+#include <linux/err.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
hsotg->gadget.dev.driver = NULL;
return ret;
}
+EXPORT_SYMBOL(usb_gadget_register_driver);
int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
{
if (hostpc_reg) {
u32 t3;
+ spin_unlock_irq(&ehci->lock);
msleep(5);/* 5ms for HCD enter low pwr mode */
+ spin_lock_irq(&ehci->lock);
t3 = ehci_readl(ehci, hostpc_reg);
ehci_writel(ehci, t3 | HOSTPC_PHCD, hostpc_reg);
t3 = ehci_readl(ehci, hostpc_reg);
if ((temp & PORT_PE) == 0
|| (temp & PORT_RESET) != 0)
goto error;
- ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
+
/* After above check the port must be connected.
* Set appropriate bit thus could put phy into low power
* mode if we have hostpc feature
*/
+ temp &= ~PORT_WKCONN_E;
+ temp |= PORT_WKDISC_E | PORT_WKOC_E;
+ ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
if (hostpc_reg) {
- temp &= ~PORT_WKCONN_E;
- temp |= (PORT_WKDISC_E | PORT_WKOC_E);
- ehci_writel(ehci, temp | PORT_SUSPEND,
- status_reg);
+ spin_unlock_irqrestore(&ehci->lock, flags);
msleep(5);/* 5ms for HCD enter low pwr mode */
+ spin_lock_irqsave(&ehci->lock, flags);
temp1 = ehci_readl(ehci, hostpc_reg);
ehci_writel(ehci, temp1 | HOSTPC_PHCD,
hostpc_reg);
if (ep->td_base)
cpm_muram_free(cpm_muram_offset(ep->td_base));
- if (ep->conf_frame_Q) {
+ if (kfifo_initialized(&ep->conf_frame_Q)) {
size = cq_howmany(&ep->conf_frame_Q);
for (; size; size--) {
struct packet *pkt = cq_get(&ep->conf_frame_Q);
cq_delete(&ep->conf_frame_Q);
}
- if (ep->empty_frame_Q) {
+ if (kfifo_initialized(&ep->empty_frame_Q)) {
size = cq_howmany(&ep->empty_frame_Q);
for (; size; size--) {
struct packet *pkt = cq_get(&ep->empty_frame_Q);
cq_delete(&ep->empty_frame_Q);
}
- if (ep->dummy_packets_Q) {
+ if (kfifo_initialized(&ep->dummy_packets_Q)) {
size = cq_howmany(&ep->dummy_packets_Q);
for (; size; size--) {
u8 *buff = cq_get(&ep->dummy_packets_Q);
#include <linux/usb.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/mm.h>
#include <linux/irq.h>
+#include <asm/cacheflush.h>
#include "../core/hcd.h"
#include "r8a66597.h"
{
int port;
+ /* disable interrupts */
r8a66597_write(r8a66597, 0, INTENB0);
- r8a66597_write(r8a66597, 0, INTSTS0);
+ r8a66597_write(r8a66597, 0, INTENB1);
+ r8a66597_write(r8a66597, 0, BRDYENB);
+ r8a66597_write(r8a66597, 0, BEMPENB);
+ r8a66597_write(r8a66597, 0, NRDYENB);
+
+ /* clear status */
+ r8a66597_write(r8a66597, 0, BRDYSTS);
+ r8a66597_write(r8a66597, 0, NRDYSTS);
+ r8a66597_write(r8a66597, 0, BEMPSTS);
for (port = 0; port < r8a66597->max_root_hub; port++)
r8a66597_disable_port(r8a66597, port);
enable_r8a66597_pipe_dma(r8a66597, dev, pipe, urb);
}
+static void r8a66597_urb_done(struct r8a66597 *r8a66597, struct urb *urb,
+ int status)
+__releases(r8a66597->lock)
+__acquires(r8a66597->lock)
+{
+ if (usb_pipein(urb->pipe) && usb_pipetype(urb->pipe) != PIPE_CONTROL) {
+ void *ptr;
+
+ for (ptr = urb->transfer_buffer;
+ ptr < urb->transfer_buffer + urb->transfer_buffer_length;
+ ptr += PAGE_SIZE)
+ flush_dcache_page(virt_to_page(ptr));
+ }
+
+ usb_hcd_unlink_urb_from_ep(r8a66597_to_hcd(r8a66597), urb);
+ spin_unlock(&r8a66597->lock);
+ usb_hcd_giveback_urb(r8a66597_to_hcd(r8a66597), urb, status);
+ spin_lock(&r8a66597->lock);
+}
+
/* this function must be called with interrupt disabled */
static void force_dequeue(struct r8a66597 *r8a66597, u16 pipenum, u16 address)
{
list_del(&td->queue);
kfree(td);
- if (urb) {
- usb_hcd_unlink_urb_from_ep(r8a66597_to_hcd(r8a66597),
- urb);
+ if (urb)
+ r8a66597_urb_done(r8a66597, urb, -ENODEV);
- spin_unlock(&r8a66597->lock);
- usb_hcd_giveback_urb(r8a66597_to_hcd(r8a66597), urb,
- -ENODEV);
- spin_lock(&r8a66597->lock);
- }
break;
}
}
/* this function must be called with interrupt disabled */
static void r8a66597_check_syssts(struct r8a66597 *r8a66597, int port,
u16 syssts)
+__releases(r8a66597->lock)
+__acquires(r8a66597->lock)
{
if (syssts == SE0) {
r8a66597_write(r8a66597, ~ATTCH, get_intsts_reg(port));
usb_hcd_resume_root_hub(r8a66597_to_hcd(r8a66597));
}
+ spin_unlock(&r8a66597->lock);
usb_hcd_poll_rh_status(r8a66597_to_hcd(r8a66597));
+ spin_lock(&r8a66597->lock);
}
/* this function must be called with interrupt disabled */
if (usb_pipeisoc(urb->pipe))
urb->start_frame = r8a66597_get_frame(hcd);
- usb_hcd_unlink_urb_from_ep(r8a66597_to_hcd(r8a66597), urb);
- spin_unlock(&r8a66597->lock);
- usb_hcd_giveback_urb(hcd, urb, status);
- spin_lock(&r8a66597->lock);
+ r8a66597_urb_done(r8a66597, urb, status);
}
if (restart) {
r8a66597->rh_timer.data = (unsigned long)r8a66597;
r8a66597->reg = (unsigned long)reg;
+ /* make sure no interrupts are pending */
+ ret = r8a66597_clock_enable(r8a66597);
+ if (ret < 0)
+ goto clean_up3;
+ disable_controller(r8a66597);
+
for (i = 0; i < R8A66597_MAX_NUM_PIPE; i++) {
INIT_LIST_HEAD(&r8a66597->pipe_queue[i]);
init_timer(&r8a66597->td_timer[i]);
{ USB_DEVICE(0x0711, 0x0902) },
{ USB_DEVICE(0x0711, 0x0903) },
{ USB_DEVICE(0x0711, 0x0918) },
+ { USB_DEVICE(0x0711, 0x0920) },
{ USB_DEVICE(0x182d, 0x021c) },
{ USB_DEVICE(0x182d, 0x0269) },
{ }
config USB_ULPI
bool "Generic ULPI Transceiver Driver"
depends on ARM
+ select USB_OTG_UTILS
help
Enable this to support ULPI connected USB OTG transceivers which
are likely found on embedded boards.
* Version Information
*/
#define DRIVER_VERSION "v1.5.0"
-#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>"
+#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>, Andreas Mohr"
#define DRIVER_DESC "USB FTDI Serial Converters Driver"
static int debug;
+/*
+ * Device ID not listed? Test via module params product/vendor or
+ * /sys/bus/usb/ftdi_sio/new_id, then send patch/report!
+ */
static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_NXTCAM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IBS_PEDO_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IBS_PROD_PID) },
/*
- * Due to many user requests for multiple ELV devices we enable
- * them by default.
+ * ELV devices:
*/
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_USR_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_MSM1_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_KL100_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_WS550_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_EC3000_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_WS888_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_TWS550_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_FEM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_CLI7000_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_PPS7330_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_TFM100_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_PCK100_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_RFP500_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_FS20SIG_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_UTP8_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS300PC_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_WS444PC_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_EM1010PC_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_HS485_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_UMS100_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_TFD128_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_FM3RX_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_WS777_PID) },
{ USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) },
{ USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) },
{ USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) },
{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
+ { USB_DEVICE(PAPOUCH_VID, PAPOUCH_AD4USB_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
{ USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) },
/* www.candapter.com Ewert Energy Systems CANdapter device */
#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
+#define FTDI_NXTCAM_PID 0xABB8 /* NXTCam for Mindstorms NXT */
+
/* OOCDlink by Joern Kaipf <joernk@web.de>
* (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */
#define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */
/*
* ELV USB devices submitted by Christian Abt of ELV (www.elv.de).
* All of these devices use FTDI's vendor ID (0x0403).
+ * Further IDs taken from ELV Windows .inf file.
*
* The previously included PID for the UO 100 module was incorrect.
* In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58).
*
* Armin Laeuger originally sent the PID for the UM 100 module.
*/
+#define FTDI_ELV_USR_PID 0xE000 /* ELV Universal-Sound-Recorder */
+#define FTDI_ELV_MSM1_PID 0xE001 /* ELV Mini-Sound-Modul */
+#define FTDI_ELV_KL100_PID 0xE002 /* ELV Kfz-Leistungsmesser KL 100 */
+#define FTDI_ELV_WS550_PID 0xE004 /* WS 550 */
+#define FTDI_ELV_EC3000_PID 0xE006 /* ENERGY CONTROL 3000 USB */
+#define FTDI_ELV_WS888_PID 0xE008 /* WS 888 */
+#define FTDI_ELV_TWS550_PID 0xE009 /* Technoline WS 550 */
+#define FTDI_ELV_FEM_PID 0xE00A /* Funk Energie Monitor */
#define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */
#define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */
#define FTDI_ELV_HS485_PID 0xE0EA /* USB to RS-485 adapter */
+#define FTDI_ELV_UMS100_PID 0xE0EB /* ELV USB Master-Slave Schaltsteckdose UMS 100 */
+#define FTDI_ELV_TFD128_PID 0xE0EC /* ELV Temperatur-Feuchte-Datenlogger TFD 128 */
+#define FTDI_ELV_FM3RX_PID 0xE0ED /* ELV Messwertuebertragung FM3 RX */
+#define FTDI_ELV_WS777_PID 0xE0EE /* Conrad WS 777 */
#define FTDI_ELV_EM1010PC_PID 0xE0EF /* Engery monitor EM 1010 PC */
#define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */
#define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */
#define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */
#define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */
#define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */
+#define FTDI_ELV_UTP8_PID 0xE0F5 /* ELV UTP 8 */
#define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */
+#define FTDI_ELV_WS444PC_PID 0xE0F7 /* Conrad WS 444 PC */
#define FTDI_PHI_FISCO_PID 0xE40B /* PHI Fisco USB to Serial cable */
#define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */
#define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */
#define PAPOUCH_VID 0x5050 /* Vendor ID */
#define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */
#define PAPOUCH_QUIDO4x4_PID 0x0900 /* Quido 4/4 Module */
+#define PAPOUCH_AD4USB_PID 0x8003 /* AD4USB Measurement Module */
/*
* Marvell SheevaPlug
{ USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
},
+ { USB_DEVICE(0x413C, 0x08133) }, /* Dell Computer Corp. Wireless 5720 VZW Mobile Broadband (EVDO Rev-A) Minicard GPS Port */
{ }
};
UNUSUAL_DEV( 0x07af, 0x0004, 0x0100, 0x0133,
"Microtech",
"USB-SCSI-DB25",
- US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
+ US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init,
US_FL_SCM_MULT_TARG ),
UNUSUAL_DEV( 0x07af, 0x0005, 0x0100, 0x0100,
return 0;
}
+static void efifb_destroy(struct fb_info *info)
+{
+ if (info->screen_base)
+ iounmap(info->screen_base);
+ release_mem_region(info->aperture_base, info->aperture_size);
+ framebuffer_release(info);
+}
+
static struct fb_ops efifb_ops = {
.owner = THIS_MODULE,
+ .fb_destroy = efifb_destroy,
.fb_setcolreg = efifb_setcolreg,
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
info->par = NULL;
info->aperture_base = efifb_fix.smem_start;
- info->aperture_size = size_total;
+ info->aperture_size = size_remap;
info->screen_base = ioremap(efifb_fix.smem_start, efifb_fix.smem_len);
if (!info->screen_base) {
*/
static int imxfb_suspend(struct platform_device *dev, pm_message_t state)
{
- struct imxfb_info *fbi = platform_get_drvdata(dev);
+ struct fb_info *info = platform_get_drvdata(dev);
+ struct imxfb_info *fbi = info->par;
pr_debug("%s\n", __func__);
static int imxfb_resume(struct platform_device *dev)
{
- struct imxfb_info *fbi = platform_get_drvdata(dev);
+ struct fb_info *info = platform_get_drvdata(dev);
+ struct imxfb_info *fbi = info->par;
pr_debug("%s\n", __func__);
unsigned long flags;
dma_cookie_t cookie;
- dev_dbg(mx3fb->dev, "mx3fbi %p, desc %p, sg %p\n", mx3_fbi,
- to_tx_desc(mx3_fbi->txd), to_tx_desc(mx3_fbi->txd)->sg);
+ if (mx3_fbi->txd)
+ dev_dbg(mx3fb->dev, "mx3fbi %p, desc %p, sg %p\n", mx3_fbi,
+ to_tx_desc(mx3_fbi->txd), to_tx_desc(mx3_fbi->txd)->sg);
+ else
+ dev_dbg(mx3fb->dev, "mx3fbi %p, txd = NULL\n", mx3_fbi);
/* This enables the channel */
if (mx3_fbi->cookie < 0) {
static void sdc_set_brightness(struct mx3fb_data *mx3fb, uint8_t value)
{
+ dev_dbg(mx3fb->dev, "%s: value = %d\n", __func__, value);
/* This might be board-specific */
mx3fb_write_reg(mx3fb, 0x03000000UL | value << 16, SDC_PWM_CTRL);
return;
goto ersdc0;
}
+ mx3fb->backlight_level = 255;
+
ret = init_fb_chan(mx3fb, to_idmac_chan(chan));
if (ret < 0)
goto eisdc0;
- mx3fb->backlight_level = 255;
-
return 0;
eisdc0:
struct virtio_balloon
{
struct virtio_device *vdev;
- struct virtqueue *inflate_vq, *deflate_vq;
+ struct virtqueue *inflate_vq, *deflate_vq, *stats_vq;
/* Where the ballooning thread waits for config to change. */
wait_queue_head_t config_change;
/* The array of pfns we tell the Host about. */
unsigned int num_pfns;
u32 pfns[256];
+
+ /* Memory statistics */
+ int need_stats_update;
+ struct virtio_balloon_stat stats[VIRTIO_BALLOON_S_NR];
};
static struct virtio_device_id id_table[] = {
}
}
+static inline void update_stat(struct virtio_balloon *vb, int idx,
+ u16 tag, u64 val)
+{
+ BUG_ON(idx >= VIRTIO_BALLOON_S_NR);
+ vb->stats[idx].tag = tag;
+ vb->stats[idx].val = val;
+}
+
+#define pages_to_bytes(x) ((u64)(x) << PAGE_SHIFT)
+
+static void update_balloon_stats(struct virtio_balloon *vb)
+{
+ unsigned long events[NR_VM_EVENT_ITEMS];
+ struct sysinfo i;
+ int idx = 0;
+
+ all_vm_events(events);
+ si_meminfo(&i);
+
+ update_stat(vb, idx++, VIRTIO_BALLOON_S_SWAP_IN,
+ pages_to_bytes(events[PSWPIN]));
+ update_stat(vb, idx++, VIRTIO_BALLOON_S_SWAP_OUT,
+ pages_to_bytes(events[PSWPOUT]));
+ update_stat(vb, idx++, VIRTIO_BALLOON_S_MAJFLT, events[PGMAJFAULT]);
+ update_stat(vb, idx++, VIRTIO_BALLOON_S_MINFLT, events[PGFAULT]);
+ update_stat(vb, idx++, VIRTIO_BALLOON_S_MEMFREE,
+ pages_to_bytes(i.freeram));
+ update_stat(vb, idx++, VIRTIO_BALLOON_S_MEMTOT,
+ pages_to_bytes(i.totalram));
+}
+
+/*
+ * While most virtqueues communicate guest-initiated requests to the hypervisor,
+ * the stats queue operates in reverse. The driver initializes the virtqueue
+ * with a single buffer. From that point forward, all conversations consist of
+ * a hypervisor request (a call to this function) which directs us to refill
+ * the virtqueue with a fresh stats buffer. Since stats collection can sleep,
+ * we notify our kthread which does the actual work via stats_handle_request().
+ */
+static void stats_request(struct virtqueue *vq)
+{
+ struct virtio_balloon *vb;
+ unsigned int len;
+
+ vb = vq->vq_ops->get_buf(vq, &len);
+ if (!vb)
+ return;
+ vb->need_stats_update = 1;
+ wake_up(&vb->config_change);
+}
+
+static void stats_handle_request(struct virtio_balloon *vb)
+{
+ struct virtqueue *vq;
+ struct scatterlist sg;
+
+ vb->need_stats_update = 0;
+ update_balloon_stats(vb);
+
+ vq = vb->stats_vq;
+ sg_init_one(&sg, vb->stats, sizeof(vb->stats));
+ if (vq->vq_ops->add_buf(vq, &sg, 1, 0, vb) < 0)
+ BUG();
+ vq->vq_ops->kick(vq);
+}
+
static void virtballoon_changed(struct virtio_device *vdev)
{
struct virtio_balloon *vb = vdev->priv;
try_to_freeze();
wait_event_interruptible(vb->config_change,
(diff = towards_target(vb)) != 0
+ || vb->need_stats_update
|| kthread_should_stop()
|| freezing(current));
+ if (vb->need_stats_update)
+ stats_handle_request(vb);
if (diff > 0)
fill_balloon(vb, diff);
else if (diff < 0)
static int virtballoon_probe(struct virtio_device *vdev)
{
struct virtio_balloon *vb;
- struct virtqueue *vqs[2];
- vq_callback_t *callbacks[] = { balloon_ack, balloon_ack };
- const char *names[] = { "inflate", "deflate" };
- int err;
+ struct virtqueue *vqs[3];
+ vq_callback_t *callbacks[] = { balloon_ack, balloon_ack, stats_request };
+ const char *names[] = { "inflate", "deflate", "stats" };
+ int err, nvqs;
vdev->priv = vb = kmalloc(sizeof(*vb), GFP_KERNEL);
if (!vb) {
vb->num_pages = 0;
init_waitqueue_head(&vb->config_change);
vb->vdev = vdev;
+ vb->need_stats_update = 0;
- /* We expect two virtqueues. */
- err = vdev->config->find_vqs(vdev, 2, vqs, callbacks, names);
+ /* We expect two virtqueues: inflate and deflate,
+ * and optionally stat. */
+ nvqs = virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_STATS_VQ) ? 3 : 2;
+ err = vdev->config->find_vqs(vdev, nvqs, vqs, callbacks, names);
if (err)
goto out_free_vb;
vb->inflate_vq = vqs[0];
vb->deflate_vq = vqs[1];
+ if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_STATS_VQ)) {
+ struct scatterlist sg;
+ vb->stats_vq = vqs[2];
+
+ /*
+ * Prime this virtqueue with one buffer so the hypervisor can
+ * use it to signal us later.
+ */
+ sg_init_one(&sg, vb->stats, sizeof vb->stats);
+ if (vb->stats_vq->vq_ops->add_buf(vb->stats_vq,
+ &sg, 1, 0, vb) < 0)
+ BUG();
+ vb->stats_vq->vq_ops->kick(vb->stats_vq);
+ }
vb->thread = kthread_run(balloon, vb, "vballoon");
if (IS_ERR(vb->thread)) {
kfree(vb);
}
-static unsigned int features[] = { VIRTIO_BALLOON_F_MUST_TELL_HOST };
+static unsigned int features[] = {
+ VIRTIO_BALLOON_F_MUST_TELL_HOST,
+ VIRTIO_BALLOON_F_STATS_VQ,
+};
static struct virtio_driver virtio_balloon_driver = {
.feature_table = features,
.name = "virtio-pci",
.id_table = virtio_pci_id_table,
.probe = virtio_pci_probe,
- .remove = virtio_pci_remove,
+ .remove = __devexit_p(virtio_pci_remove),
#ifdef CONFIG_PM
.suspend = virtio_pci_suspend,
.resume = virtio_pci_resume,
#include <linux/virtio_config.h>
#include <linux/device.h>
+/* virtio guest is communicating with a virtual "device" that actually runs on
+ * a host processor. Memory barriers are used to control SMP effects. */
+#ifdef CONFIG_SMP
+/* Where possible, use SMP barriers which are more lightweight than mandatory
+ * barriers, because mandatory barriers control MMIO effects on accesses
+ * through relaxed memory I/O windows (which virtio does not use). */
+#define virtio_mb() smp_mb()
+#define virtio_rmb() smp_rmb()
+#define virtio_wmb() smp_wmb()
+#else
+/* We must force memory ordering even if guest is UP since host could be
+ * running on another CPU, but SMP barriers are defined to barrier() in that
+ * configuration. So fall back to mandatory barriers instead. */
+#define virtio_mb() mb()
+#define virtio_rmb() rmb()
+#define virtio_wmb() wmb()
+#endif
+
#ifdef DEBUG
/* For development, we want to crash whenever the ring is screwed. */
#define BAD_RING(_vq, fmt, args...) \
panic("%s:in_use = %i\n", \
(_vq)->vq.name, (_vq)->in_use); \
(_vq)->in_use = __LINE__; \
- mb(); \
} while (0)
#define END_USE(_vq) \
- do { BUG_ON(!(_vq)->in_use); (_vq)->in_use = 0; mb(); } while(0)
+ do { BUG_ON(!(_vq)->in_use); (_vq)->in_use = 0; } while(0)
#else
#define BAD_RING(_vq, fmt, args...) \
do { \
START_USE(vq);
/* Descriptors and available array need to be set before we expose the
* new available array entries. */
- wmb();
+ virtio_wmb();
vq->vring.avail->idx += vq->num_added;
vq->num_added = 0;
/* Need to update avail index before checking if we should notify */
- mb();
+ virtio_mb();
if (!(vq->vring.used->flags & VRING_USED_F_NO_NOTIFY))
/* Prod other side to tell it about changes. */
}
/* Only get used array entries after they have been exposed by host. */
- rmb();
+ virtio_rmb();
i = vq->vring.used->ring[vq->last_used_idx%vq->vring.num].id;
*len = vq->vring.used->ring[vq->last_used_idx%vq->vring.num].len;
/* We optimistically turn back on interrupts, then check if there was
* more to do. */
vq->vring.avail->flags &= ~VRING_AVAIL_F_NO_INTERRUPT;
- mb();
+ virtio_mb();
if (unlikely(more_used(vq))) {
END_USE(vq);
return false;
return true;
}
+static void *vring_detach_unused_buf(struct virtqueue *_vq)
+{
+ struct vring_virtqueue *vq = to_vvq(_vq);
+ unsigned int i;
+ void *buf;
+
+ START_USE(vq);
+
+ for (i = 0; i < vq->vring.num; i++) {
+ if (!vq->data[i])
+ continue;
+ /* detach_buf clears data, so grab it now. */
+ buf = vq->data[i];
+ detach_buf(vq, i);
+ END_USE(vq);
+ return buf;
+ }
+ /* That should have freed everything. */
+ BUG_ON(vq->num_free != vq->vring.num);
+
+ END_USE(vq);
+ return NULL;
+}
+
irqreturn_t vring_interrupt(int irq, void *_vq)
{
struct vring_virtqueue *vq = to_vvq(_vq);
.kick = vring_kick,
.disable_cb = vring_disable_cb,
.enable_cb = vring_enable_cb,
+ .detach_unused_buf = vring_detach_unused_buf,
};
struct virtqueue *vring_new_virtqueue(unsigned int num,
/* Put everything in free lists. */
vq->num_free = num;
vq->free_head = 0;
- for (i = 0; i < num-1; i++)
+ for (i = 0; i < num-1; i++) {
vq->vring.desc[i].next = i+1;
+ vq->data[i] = NULL;
+ }
+ vq->data[i] = NULL;
return &vq->vq;
}
/*
* Blackfin On-Chip Watchdog Driver
- * Supports BF53[123]/BF53[467]/BF54[2489]/BF561
*
* Originally based on softdog.c
- * Copyright 2006-2007 Analog Devices Inc.
+ * Copyright 2006-2010 Analog Devices Inc.
* Copyright 2006-2007 Michele d'Amico
* Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>
*
*/
static int bfin_wdt_set_timeout(unsigned long t)
{
- u32 cnt;
+ u32 cnt, max_t, sclk;
unsigned long flags;
- stampit();
+ sclk = get_sclk();
+ max_t = -1 / sclk;
+ cnt = t * sclk;
+ stamp("maxtimeout=%us newtimeout=%lus (cnt=%#x)", max_t, t, cnt);
- cnt = t * get_sclk();
- if (cnt < get_sclk()) {
+ if (t > max_t) {
printk(KERN_WARNING PFX "timeout value is too large\n");
return -EINVAL;
}
static int v9fs_parse_options(struct v9fs_session_info *v9ses, char *opts)
{
- char *options;
+ char *options, *tmp_options;
substring_t args[MAX_OPT_ARGS];
char *p;
int option = 0;
if (!opts)
return 0;
- options = kstrdup(opts, GFP_KERNEL);
- if (!options)
+ tmp_options = kstrdup(opts, GFP_KERNEL);
+ if (!tmp_options) {
+ ret = -ENOMEM;
goto fail_option_alloc;
+ }
+ options = tmp_options;
while ((p = strsep(&options, ",")) != NULL) {
int token;
break;
case Opt_cache:
s = match_strdup(&args[0]);
- if (!s)
- goto fail_option_alloc;
+ if (!s) {
+ ret = -ENOMEM;
+ P9_DPRINTK(P9_DEBUG_ERROR,
+ "problem allocating copy of cache arg\n");
+ goto free_and_return;
+ }
if (strcmp(s, "loose") == 0)
v9ses->cache = CACHE_LOOSE;
case Opt_access:
s = match_strdup(&args[0]);
- if (!s)
- goto fail_option_alloc;
+ if (!s) {
+ ret = -ENOMEM;
+ P9_DPRINTK(P9_DEBUG_ERROR,
+ "problem allocating copy of access arg\n");
+ goto free_and_return;
+ }
v9ses->flags &= ~V9FS_ACCESS_MASK;
if (strcmp(s, "user") == 0)
continue;
}
}
- kfree(options);
- return ret;
+free_and_return:
+ kfree(tmp_options);
fail_option_alloc:
- P9_DPRINTK(P9_DEBUG_ERROR,
- "failed to allocate copy of option argument\n");
- return -ENOMEM;
+ return ret;
}
/**
int v9fs_uflags2omode(int uflags, int extended);
ssize_t v9fs_file_readn(struct file *, char *, char __user *, u32, u64);
+void v9fs_blank_wstat(struct p9_wstat *wstat);
return total;
}
+static int v9fs_file_fsync(struct file *filp, struct dentry *dentry,
+ int datasync)
+{
+ struct p9_fid *fid;
+ struct p9_wstat wstat;
+ int retval;
+
+ P9_DPRINTK(P9_DEBUG_VFS, "filp %p dentry %p datasync %x\n", filp,
+ dentry, datasync);
+
+ fid = filp->private_data;
+ v9fs_blank_wstat(&wstat);
+
+ retval = p9_client_wstat(fid, &wstat);
+ return retval;
+}
+
static const struct file_operations v9fs_cached_file_operations = {
.llseek = generic_file_llseek,
.read = do_sync_read,
.release = v9fs_dir_release,
.lock = v9fs_file_lock,
.mmap = generic_file_readonly_mmap,
+ .fsync = v9fs_file_fsync,
};
const struct file_operations v9fs_file_operations = {
.release = v9fs_dir_release,
.lock = v9fs_file_lock,
.mmap = generic_file_readonly_mmap,
+ .fsync = v9fs_file_fsync,
};
*
*/
-static void
+void
v9fs_blank_wstat(struct p9_wstat *wstat)
{
wstat->type = ~0;
brelse(bh);
unacquire_priv_sbp:
+ kfree(befs_sb->mount_opts.iocharset);
kfree(sb->s_fs_info);
unacquire_none:
static inline int use_bip_pool(unsigned int idx)
{
- if (idx == BIOVEC_NR_POOLS)
+ if (idx == BIOVEC_MAX_IDX)
return 1;
return 0;
/* Use mempool if lower order alloc failed or max vecs were requested */
if (bip == NULL) {
+ idx = BIOVEC_MAX_IDX; /* so we free the payload properly later */
bip = mempool_alloc(bs->bio_integrity_pool, gfp_mask);
if (unlikely(bip == NULL)) {
if (page == prev->bv_page &&
offset == prev->bv_offset + prev->bv_len) {
+ unsigned int prev_bv_len = prev->bv_len;
prev->bv_len += len;
if (q->merge_bvec_fn) {
struct bvec_merge_data bvm = {
+ /* prev_bvec is already charged in
+ bi_size, discharge it in order to
+ simulate merging updated prev_bvec
+ as new bvec. */
.bi_bdev = bio->bi_bdev,
.bi_sector = bio->bi_sector,
- .bi_size = bio->bi_size,
+ .bi_size = bio->bi_size - prev_bv_len,
.bi_rw = bio->bi_rw,
};
if (!sb)
goto out;
if (sb->s_flags & MS_RDONLY) {
- deactivate_locked_super(sb);
+ sb->s_frozen = SB_FREEZE_TRANS;
+ up_write(&sb->s_umount);
mutex_unlock(&bdev->bd_fsfreeze_mutex);
return sb;
}
BUG_ON(sb->s_bdev != bdev);
down_write(&sb->s_umount);
if (sb->s_flags & MS_RDONLY)
- goto out_deactivate;
+ goto out_unfrozen;
if (sb->s_op->unfreeze_fs) {
error = sb->s_op->unfreeze_fs(sb);
}
}
+out_unfrozen:
sb->s_frozen = SB_UNFROZEN;
smp_wmb();
wake_up(&sb->s_wait_unfrozen);
-out_deactivate:
if (sb)
deactivate_locked_super(sb);
out_unlock:
if (!(sb->s_flags & MS_RDONLY)) {
ret = btrfs_recover_relocation(tree_root);
- BUG_ON(ret);
+ if (ret < 0) {
+ printk(KERN_WARNING
+ "btrfs: failed to recover relocation\n");
+ err = -EINVAL;
+ goto fail_trans_kthread;
+ }
}
location.objectid = BTRFS_FS_TREE_OBJECTID;
int ret;
while (level >= 0) {
- if (path->slots[level] >=
- btrfs_header_nritems(path->nodes[level]))
- break;
-
ret = walk_down_proc(trans, root, path, wc, lookup_info);
if (ret > 0)
break;
if (level == 0)
break;
+ if (path->slots[level] >=
+ btrfs_header_nritems(path->nodes[level]))
+ break;
+
ret = do_walk_down(trans, root, path, wc, &lookup_info);
if (ret > 0) {
path->slots[level]++;
spin_unlock(&tree->buffer_lock);
goto free_eb;
}
- spin_unlock(&tree->buffer_lock);
-
/* add one reference for the tree */
atomic_inc(&eb->refs);
+ spin_unlock(&tree->buffer_lock);
return eb;
free_eb:
inode->i_ino, orig_offset);
BUG_ON(ret);
}
- fi = btrfs_item_ptr(leaf, path->slots[0],
- struct btrfs_file_extent_item);
if (del_nr == 0) {
+ fi = btrfs_item_ptr(leaf, path->slots[0],
+ struct btrfs_file_extent_item);
btrfs_set_file_extent_type(leaf, fi,
BTRFS_FILE_EXTENT_REG);
btrfs_mark_buffer_dirty(leaf);
} else {
+ fi = btrfs_item_ptr(leaf, del_slot - 1,
+ struct btrfs_file_extent_item);
btrfs_set_file_extent_type(leaf, fi,
BTRFS_FILE_EXTENT_REG);
btrfs_set_file_extent_num_bytes(leaf, fi,
}
mutex_lock(&dentry->d_inode->i_mutex);
out:
- return ret > 0 ? EIO : ret;
+ return ret > 0 ? -EIO : ret;
}
static const struct vm_operations_struct btrfs_file_vm_ops = {
* before we start the transaction. It limits the amount of btree
* reads required while inside the transaction.
*/
-static noinline void reada_csum(struct btrfs_root *root,
- struct btrfs_path *path,
- struct btrfs_ordered_extent *ordered_extent)
-{
- struct btrfs_ordered_sum *sum;
- u64 bytenr;
-
- sum = list_entry(ordered_extent->list.next, struct btrfs_ordered_sum,
- list);
- bytenr = sum->sums[0].bytenr;
-
- /*
- * we don't care about the results, the point of this search is
- * just to get the btree leaves into ram
- */
- btrfs_lookup_csum(NULL, root->fs_info->csum_root, path, bytenr, 0);
-}
-
/* as ordered data IO finishes, this gets called so we can finish
* an ordered extent if the range of bytes in the file it covers are
* fully written.
struct btrfs_trans_handle *trans;
struct btrfs_ordered_extent *ordered_extent = NULL;
struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree;
- struct btrfs_path *path;
int compressed = 0;
int ret;
if (!ret)
return 0;
- /*
- * before we join the transaction, try to do some of our IO.
- * This will limit the amount of IO that we have to do with
- * the transaction running. We're unlikely to need to do any
- * IO if the file extents are new, the disk_i_size checks
- * covers the most common case.
- */
- if (start < BTRFS_I(inode)->disk_i_size) {
- path = btrfs_alloc_path();
- if (path) {
- ret = btrfs_lookup_file_extent(NULL, root, path,
- inode->i_ino,
- start, 0);
- ordered_extent = btrfs_lookup_ordered_extent(inode,
- start);
- if (!list_empty(&ordered_extent->list)) {
- btrfs_release_path(root, path);
- reada_csum(root, path, ordered_extent);
- }
- btrfs_free_path(path);
- }
- }
-
- if (!ordered_extent)
- ordered_extent = btrfs_lookup_ordered_extent(inode, start);
+ ordered_extent = btrfs_lookup_ordered_extent(inode, start);
BUG_ON(!ordered_extent);
+
if (test_bit(BTRFS_ORDERED_NOCOW, &ordered_extent->flags)) {
BUG_ON(!list_empty(&ordered_extent->list));
ret = btrfs_ordered_update_i_size(inode, 0, ordered_extent);
inode->i_ctime = CURRENT_TIME;
BTRFS_I(inode)->flags |= BTRFS_INODE_PREALLOC;
if (!(mode & FALLOC_FL_KEEP_SIZE) &&
- cur_offset > inode->i_size) {
+ (actual_len > inode->i_size) &&
+ (cur_offset > inode->i_size)) {
+
if (cur_offset > actual_len)
i_size = actual_len;
else
BTRFS_DATA_RELOC_TREE_OBJECTID);
if (IS_ERR(fs_root))
err = PTR_ERR(fs_root);
- btrfs_orphan_cleanup(fs_root);
+ else
+ btrfs_orphan_cleanup(fs_root);
}
return err;
}
dir = dget_parent(object->dentry);
mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_PARENT);
- ret = cachefiles_bury_object(cache, dir, object->dentry);
+
+ /* we need to check that our parent is _still_ our parent - it may have
+ * been renamed */
+ if (dir == object->dentry->d_parent) {
+ ret = cachefiles_bury_object(cache, dir, object->dentry);
+ } else {
+ /* it got moved, presumably by cachefilesd culling it, so it's
+ * no longer in the key path and we can ignore it */
+ mutex_unlock(&dir->d_inode->i_mutex);
+ ret = 0;
+ }
dput(dir);
_leave(" = %d", ret);
+Version 1.62
+------------
+Add sockopt=TCP_NODELAY mount option.
+
Version 1.61
------------
Fix append problem to Samba servers (files opened with O_APPEND could
extern const struct export_operations cifs_export_ops;
#endif /* EXPERIMENTAL */
-#define CIFS_VERSION "1.61"
+#define CIFS_VERSION "1.62"
#endif /* _CIFSFS_H */
bool svlocal:1; /* local server or remote */
bool noblocksnd; /* use blocking sendmsg */
bool noautotune; /* do not autotune send buf sizes */
+ bool tcp_nodelay;
atomic_t inFlight; /* number of requests on the wire to server */
#ifdef CONFIG_CIFS_STATS2
atomic_t inSend; /* requests trying to send */
bool nostrictsync:1; /* do not force expensive SMBflush on every sync */
unsigned int rsize;
unsigned int wsize;
- unsigned int sockopt;
+ bool sockopt_tcp_nodelay:1;
unsigned short int port;
char *prepath;
};
simple_strtoul(value, &value, 0);
}
} else if (strnicmp(data, "sockopt", 5) == 0) {
- if (value && *value) {
- vol->sockopt =
- simple_strtoul(value, &value, 0);
+ if (!value || !*value) {
+ cERROR(1, ("no socket option specified"));
+ continue;
+ } else if (strnicmp(value, "TCP_NODELAY", 11) == 0) {
+ vol->sockopt_tcp_nodelay = 1;
}
} else if (strnicmp(data, "netbiosname", 4) == 0) {
if (!value || !*value || (*value == ' ')) {
tcp_ses->noblocksnd = volume_info->noblocksnd;
tcp_ses->noautotune = volume_info->noautotune;
+ tcp_ses->tcp_nodelay = volume_info->sockopt_tcp_nodelay;
atomic_set(&tcp_ses->inFlight, 0);
init_waitqueue_head(&tcp_ses->response_q);
init_waitqueue_head(&tcp_ses->request_q);
ipv4_connect(struct TCP_Server_Info *server)
{
int rc = 0;
+ int val;
bool connected = false;
__be16 orig_port = 0;
struct socket *socket = server->ssocket;
socket->sk->sk_rcvbuf = 140 * 1024;
}
+ if (server->tcp_nodelay) {
+ val = 1;
+ rc = kernel_setsockopt(socket, SOL_TCP, TCP_NODELAY,
+ (char *)&val, sizeof(val));
+ if (rc)
+ cFYI(1, ("set TCP_NODELAY socket option error %d", rc));
+ }
+
cFYI(1, ("sndbuf %d rcvbuf %d rcvtimeo 0x%lx",
socket->sk->sk_sndbuf,
socket->sk->sk_rcvbuf, socket->sk->sk_rcvtimeo));
ipv6_connect(struct TCP_Server_Info *server)
{
int rc = 0;
+ int val;
bool connected = false;
__be16 orig_port = 0;
struct socket *socket = server->ssocket;
*/
socket->sk->sk_rcvtimeo = 7 * HZ;
socket->sk->sk_sndtimeo = 5 * HZ;
+
+ if (server->tcp_nodelay) {
+ val = 1;
+ rc = kernel_setsockopt(socket, SOL_TCP, TCP_NODELAY,
+ (char *)&val, sizeof(val));
+ if (rc)
+ cFYI(1, ("set TCP_NODELAY socket option error %d", rc));
+ }
+
server->ssocket = socket;
return rc;
CIFS_MOUNT_MAP_SPECIAL_CHR);
}
- if (!rc)
+ if (!rc) {
rc = inode_setattr(inode, attrs);
+
+ /* force revalidate when any of these times are set since some
+ of the fs types (eg ext3, fat) do not have fine enough
+ time granularity to match protocol, and we do not have a
+ a way (yet) to query the server fs's time granularity (and
+ whether it rounds times down).
+ */
+ if (!rc && (attrs->ia_valid & (ATTR_MTIME | ATTR_CTIME)))
+ cifsInode->time = 0;
+ }
out:
kfree(args);
kfree(full_path);
cFYI(1, ("For %s", name->name));
+ if (parent->d_op && parent->d_op->d_hash)
+ parent->d_op->d_hash(parent, name);
+ else
+ name->hash = full_name_hash(name->name, name->len);
+
dentry = d_lookup(parent, name);
if (dentry) {
/* FIXME: check for inode number changes? */
min(len, max_len), nlt,
cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
+ pqst->len -= nls_nullsize(nlt);
} else {
pqst->name = filename;
pqst->len = len;
}
- pqst->hash = full_name_hash(pqst->name, pqst->len);
-/* cFYI(1, ("filldir on %s",pqst->name)); */
return rc;
}
/* null user mount */
*bcc_ptr = 0;
*(bcc_ptr+1) = 0;
- } else { /* 300 should be long enough for any conceivable user name */
+ } else {
bytes_ret = cifs_strtoUCS((__le16 *) bcc_ptr, ses->userName,
- 300, nls_cp);
+ MAX_USERNAME_SIZE, nls_cp);
}
bcc_ptr += 2 * bytes_ret;
bcc_ptr += 2; /* account for null termination */
/* copy user */
if (ses->userName == NULL) {
/* BB what about null user mounts - check that we do this BB */
- } else { /* 300 should be long enough for any conceivable user name */
- strncpy(bcc_ptr, ses->userName, 300);
+ } else {
+ strncpy(bcc_ptr, ses->userName, MAX_USERNAME_SIZE);
}
- /* BB improve check for overflow */
- bcc_ptr += strnlen(ses->userName, 300);
+ bcc_ptr += strnlen(ses->userName, MAX_USERNAME_SIZE);
*bcc_ptr = 0;
bcc_ptr++; /* account for null termination */
u32 data;
void __user *dxferp;
int err;
+ int interface_id;
+
+ if (get_user(interface_id, &sgio32->interface_id))
+ return -EFAULT;
+ if (interface_id != 'S')
+ return sys_ioctl(fd, cmd, (unsigned long)sgio32);
if (get_user(iovec_count, &sgio32->iovec_count))
return -EFAULT;
COMPATIBLE_IOCTL(TIOCLINUX)
COMPATIBLE_IOCTL(TIOCSBRK)
COMPATIBLE_IOCTL(TIOCCBRK)
+COMPATIBLE_IOCTL(TIOCGSID)
COMPATIBLE_IOCTL(TIOCGICOUNT)
/* Little t */
COMPATIBLE_IOCTL(TIOCGETD)
#ifdef CONFIG_BLOCK
/* loop */
IGNORE_IOCTL(LOOP_CLR_FD)
+/* md calls this on random blockdevs */
+IGNORE_IOCTL(RAID_VERSION)
/* SG stuff */
COMPATIBLE_IOCTL(SG_SET_TIMEOUT)
COMPATIBLE_IOCTL(SG_GET_TIMEOUT)
struct vm_area_struct *prev = NULL;
unsigned long vm_flags;
unsigned long stack_base;
+ unsigned long stack_size;
+ unsigned long stack_expand;
+ unsigned long rlim_stack;
#ifdef CONFIG_STACK_GROWSUP
/* Limit stack size to 1GB */
goto out_unlock;
}
+ stack_expand = EXTRA_STACK_VM_PAGES * PAGE_SIZE;
+ stack_size = vma->vm_end - vma->vm_start;
+ /*
+ * Align this down to a page boundary as expand_stack
+ * will align it up.
+ */
+ rlim_stack = rlimit(RLIMIT_STACK) & PAGE_MASK;
#ifdef CONFIG_STACK_GROWSUP
- stack_base = vma->vm_end + EXTRA_STACK_VM_PAGES * PAGE_SIZE;
+ if (stack_size + stack_expand > rlim_stack)
+ stack_base = vma->vm_start + rlim_stack;
+ else
+ stack_base = vma->vm_end + stack_expand;
#else
- stack_base = vma->vm_start - EXTRA_STACK_VM_PAGES * PAGE_SIZE;
+ if (stack_size + stack_expand > rlim_stack)
+ stack_base = vma->vm_end - rlim_stack;
+ else
+ stack_base = vma->vm_start - stack_expand;
#endif
ret = expand_stack(vma, stack_base);
if (ret)
goto out;
bprm->mm = NULL; /* We're using it now */
+
+ current->flags &= ~PF_RANDOMIZE;
+ flush_thread();
+ current->personality &= ~bprm->per_clear;
+
return 0;
out:
tcomm[i] = '\0';
set_task_comm(current, tcomm);
- current->flags &= ~PF_RANDOMIZE;
- flush_thread();
-
/* Set the new mm task size. We have to do that late because it may
* depend on TIF_32BIT which is only updated in flush_thread() on
* some architectures like powerpc
set_dumpable(current->mm, suid_dumpable);
}
- current->personality &= ~bprm->per_clear;
-
/*
* Flush performance counters when crossing a
* security domain:
static void f_modown(struct file *filp, struct pid *pid, enum pid_type type,
int force)
{
- unsigned long flags;
-
- write_lock_irqsave(&filp->f_owner.lock, flags);
+ write_lock_irq(&filp->f_owner.lock);
if (force || !filp->f_owner.pid) {
put_pid(filp->f_owner.pid);
filp->f_owner.pid = get_pid(pid);
filp->f_owner.euid = cred->euid;
}
}
- write_unlock_irqrestore(&filp->f_owner.lock, flags);
+ write_unlock_irq(&filp->f_owner.lock);
}
int __f_setown(struct file *filp, struct pid *pid, enum pid_type type,
if (file->f_op && file->f_op->release)
file->f_op->release(inode, file);
security_file_free(file);
+ ima_file_free(file);
if (unlikely(S_ISCHR(inode->i_mode) && inode->i_cdev != NULL))
cdev_put(inode->i_cdev);
fops_put(file->f_op);
if (!page)
break;
+ if (mapping_writably_mapped(mapping))
+ flush_dcache_page(page);
+
pagefault_disable();
tmp = iov_iter_copy_from_user_atomic(page, ii, offset, bytes);
pagefault_enable();
*ptr++ = cpu_to_be64(bn++);
break;
}
- } while (state != ALLOC_DATA);
+ } while ((state != ALLOC_DATA) || !dblock);
ip->i_height = height;
gfs2_add_inode_blocks(&ip->i_inode, alloced);
if (!gl)
return -ENOMEM;
+ atomic_inc(&sdp->sd_glock_disposal);
gl->gl_flags = 0;
gl->gl_name = name;
atomic_set(&gl->gl_ref, 1);
up_write(&gfs2_umount_flush_sem);
msleep(10);
}
+ flush_workqueue(glock_workqueue);
+ wait_event(sdp->sd_glock_wait, atomic_read(&sdp->sd_glock_disposal) == 0);
+ gfs2_dump_lockstate(sdp);
}
void gfs2_glock_finish_truncate(struct gfs2_inode *ip)
int (*lm_mount) (struct gfs2_sbd *sdp, const char *fsname);
void (*lm_unmount) (struct gfs2_sbd *sdp);
void (*lm_withdraw) (struct gfs2_sbd *sdp);
- void (*lm_put_lock) (struct kmem_cache *cachep, void *gl);
+ void (*lm_put_lock) (struct kmem_cache *cachep, struct gfs2_glock *gl);
unsigned int (*lm_lock) (struct gfs2_glock *gl,
unsigned int req_state, unsigned int flags);
void (*lm_cancel) (struct gfs2_glock *gl);
struct gfs2_holder sd_live_gh;
struct gfs2_glock *sd_rename_gl;
struct gfs2_glock *sd_trans_gl;
+ wait_queue_head_t sd_glock_wait;
+ atomic_t sd_glock_disposal;
/* Inode Stuff */
{
struct gfs2_glock *gl = arg;
unsigned ret = gl->gl_state;
+ struct gfs2_sbd *sdp = gl->gl_sbd;
BUG_ON(gl->gl_lksb.sb_flags & DLM_SBF_DEMOTED);
switch (gl->gl_lksb.sb_status) {
case -DLM_EUNLOCK: /* Unlocked, so glock can be freed */
kmem_cache_free(gfs2_glock_cachep, gl);
+ if (atomic_dec_and_test(&sdp->sd_glock_disposal))
+ wake_up(&sdp->sd_glock_wait);
return;
case -DLM_ECANCEL: /* Cancel while getting lock */
ret |= LM_OUT_CANCELED;
return LM_OUT_ASYNC;
}
-static void gdlm_put_lock(struct kmem_cache *cachep, void *ptr)
+static void gdlm_put_lock(struct kmem_cache *cachep, struct gfs2_glock *gl)
{
- struct gfs2_glock *gl = ptr;
- struct lm_lockstruct *ls = &gl->gl_sbd->sd_lockstruct;
+ struct gfs2_sbd *sdp = gl->gl_sbd;
+ struct lm_lockstruct *ls = &sdp->sd_lockstruct;
int error;
if (gl->gl_lksb.sb_lkid == 0) {
kmem_cache_free(cachep, gl);
+ if (atomic_dec_and_test(&sdp->sd_glock_disposal))
+ wake_up(&sdp->sd_glock_wait);
return;
}
gfs2_tune_init(&sdp->sd_tune);
+ init_waitqueue_head(&sdp->sd_glock_wait);
+ atomic_set(&sdp->sd_glock_disposal, 0);
spin_lock_init(&sdp->sd_statfs_spin);
spin_lock_init(&sdp->sd_rindex_spin);
goto fail;
}
- error = -EINVAL;
+ error = -EUSERS;
if (!gfs2_jindex_size(sdp)) {
fs_err(sdp, "no journals!\n");
goto fail_jindex;
{ Opt_err, NULL },
};
+static void nolock_put_lock(struct kmem_cache *cachep, struct gfs2_glock *gl)
+{
+ struct gfs2_sbd *sdp = gl->gl_sbd;
+ kmem_cache_free(cachep, gl);
+ if (atomic_dec_and_test(&sdp->sd_glock_disposal))
+ wake_up(&sdp->sd_glock_wait);
+}
+
static const struct lm_lockops nolock_ops = {
.lm_proto_name = "lock_nolock",
- .lm_put_lock = kmem_cache_free,
+ .lm_put_lock = nolock_put_lock,
.lm_tokens = &nolock_tokens,
};
error = vfs_follow_link(nd, buf);
if (buf != array)
kfree(buf);
- }
+ } else
+ path_put(&nd->path);
return ERR_PTR(error);
}
u64 rgrp_count = ip->i_disksize;
int error;
- if (do_div(rgrp_count, sizeof(struct gfs2_rindex))) {
- gfs2_consist_inode(ip);
- return -EIO;
- }
-
+ do_div(rgrp_count, sizeof(struct gfs2_rindex));
clear_rgrpdi(sdp);
file_ra_state_init(&ra_state, inode->i_mapping);
struct gfs2_alloc *gfs2_alloc_get(struct gfs2_inode *ip)
{
BUG_ON(ip->i_alloc != NULL);
- ip->i_alloc = kzalloc(sizeof(struct gfs2_alloc), GFP_KERNEL);
+ ip->i_alloc = kzalloc(sizeof(struct gfs2_alloc), GFP_NOFS);
return ip->i_alloc;
}
#include <linux/gfs2_ondisk.h>
#include <linux/crc32.h>
#include <linux/time.h>
+#include <linux/wait.h>
#include "gfs2.h"
#include "incore.h"
return PTR_ERR(dentry);
}
+/*
+ * This is a temporary kludge to deal with "automount" symlinks; proper
+ * solution is to trigger them on follow_mount(), so that do_lookup()
+ * would DTRT. To be killed before 2.6.34-final.
+ */
+static inline int follow_on_final(struct inode *inode, unsigned lookup_flags)
+{
+ return inode && unlikely(inode->i_op->follow_link) &&
+ ((lookup_flags & LOOKUP_FOLLOW) || S_ISDIR(inode->i_mode));
+}
+
/*
* Name resolution.
* This is the basic name resolution function, turning a pathname into
if (err)
break;
inode = next.dentry->d_inode;
- if ((lookup_flags & LOOKUP_FOLLOW)
- && inode && inode->i_op->follow_link) {
+ if (follow_on_final(inode, lookup_flags)) {
err = do_follow_link(&next, nd);
if (err)
goto return_err;
if (nd.root.mnt)
path_put(&nd.root);
if (!IS_ERR(filp)) {
- error = ima_path_check(&filp->f_path, filp->f_mode &
- (MAY_READ | MAY_WRITE | MAY_EXEC));
+ error = ima_file_check(filp, acc_mode);
if (error) {
fput(filp);
filp = ERR_PTR(error);
}
filp = nameidata_to_filp(&nd);
if (!IS_ERR(filp)) {
- error = ima_path_check(&filp->f_path, filp->f_mode &
- (MAY_READ | MAY_WRITE | MAY_EXEC));
+ error = ima_file_check(filp, acc_mode);
if (error) {
fput(filp);
filp = ERR_PTR(error);
data->res.fattr = &data->fattr;
data->res.eof = 0;
data->res.count = bytes;
+ nfs_fattr_init(&data->fattr);
msg.rpc_argp = &data->args;
msg.rpc_resp = &data->res;
data->res.count = 0;
data->res.fattr = &data->fattr;
data->res.verf = &data->verf;
+ nfs_fattr_init(&data->fattr);
NFS_PROTO(data->inode)->commit_setup(data, &msg);
data->res.fattr = &data->fattr;
data->res.count = bytes;
data->res.verf = &data->verf;
+ nfs_fattr_init(&data->fattr);
task_setup_data.task = &data->task;
task_setup_data.callback_data = data;
{
dfprintk(PAGECACHE, "NFS: release_page(%p)\n", page);
+ if (gfp & __GFP_WAIT)
+ nfs_wb_page(page->mapping->host, page);
/* If PagePrivate() is set, then the page is not freeable */
if (PagePrivate(page))
return 0;
*/
int nfs_fscache_release_page(struct page *page, gfp_t gfp)
{
- struct nfs_inode *nfsi = NFS_I(page->mapping->host);
- struct fscache_cookie *cookie = nfsi->fscache;
-
- BUG_ON(!cookie);
-
if (PageFsCache(page)) {
+ struct nfs_inode *nfsi = NFS_I(page->mapping->host);
+ struct fscache_cookie *cookie = nfsi->fscache;
+
+ BUG_ON(!cookie);
dfprintk(FSCACHE, "NFS: fscache releasepage (0x%p/0x%p/0x%p)\n",
cookie, page, nfsi);
if (fattr->valid & NFS_ATTR_FATTR_MODE) {
if ((inode->i_mode & S_IALLUGO) != (fattr->mode & S_IALLUGO)) {
+ umode_t newmode = inode->i_mode & S_IFMT;
+ newmode |= fattr->mode & S_IALLUGO;
+ inode->i_mode = newmode;
invalid |= NFS_INO_INVALID_ATTR|NFS_INO_INVALID_ACCESS|NFS_INO_INVALID_ACL;
- inode->i_mode = fattr->mode;
}
} else if (server->caps & NFS_CAP_MODE)
invalid |= save_cache_validity & (NFS_INO_INVALID_ATTR
{ .status = MNT3ERR_INVAL, .errno = -EINVAL, },
{ .status = MNT3ERR_NAMETOOLONG, .errno = -ENAMETOOLONG, },
{ .status = MNT3ERR_NOTSUPP, .errno = -ENOTSUPP, },
- { .status = MNT3ERR_SERVERFAULT, .errno = -ESERVERFAULT, },
+ { .status = MNT3ERR_SERVERFAULT, .errno = -EREMOTEIO, },
};
struct mountres {
{ NFSERR_BAD_COOKIE, -EBADCOOKIE },
{ NFSERR_NOTSUPP, -ENOTSUPP },
{ NFSERR_TOOSMALL, -ETOOSMALL },
- { NFSERR_SERVERFAULT, -ESERVERFAULT },
+ { NFSERR_SERVERFAULT, -EREMOTEIO },
{ NFSERR_BADTYPE, -EBADTYPE },
{ NFSERR_JUKEBOX, -EJUKEBOX },
{ -1, -EIO }
NFS_O_RDWR_STATE, /* OPEN stateid has read/write state */
NFS_STATE_RECLAIM_REBOOT, /* OPEN stateid server rebooted */
NFS_STATE_RECLAIM_NOGRACE, /* OPEN stateid needs to recover state */
+ NFS_STATE_POSIX_LOCKS, /* Posix locks are supported */
};
struct nfs4_state {
extern void nfs4_schedule_state_recovery(struct nfs_client *);
extern void nfs4_schedule_state_manager(struct nfs_client *);
extern int nfs4_state_mark_reclaim_nograce(struct nfs_client *clp, struct nfs4_state *state);
+extern int nfs4_state_mark_reclaim_reboot(struct nfs_client *clp, struct nfs4_state *state);
extern void nfs41_handle_sequence_flag_errors(struct nfs_client *clp, u32 flags);
extern void nfs4_put_lock_state(struct nfs4_lock_state *lsp);
extern int nfs4_set_lock_state(struct nfs4_state *state, struct file_lock *fl);
if (state == NULL)
break;
nfs4_state_mark_reclaim_nograce(clp, state);
- case -NFS4ERR_STALE_CLIENTID:
+ goto do_state_recovery;
case -NFS4ERR_STALE_STATEID:
- case -NFS4ERR_EXPIRED:
- nfs4_schedule_state_recovery(clp);
- ret = nfs4_wait_clnt_recover(clp);
- if (ret == 0)
- exception->retry = 1;
-#if !defined(CONFIG_NFS_V4_1)
- break;
-#else /* !defined(CONFIG_NFS_V4_1) */
- if (!nfs4_has_session(server->nfs_client))
+ if (state == NULL)
break;
- /* FALLTHROUGH */
+ nfs4_state_mark_reclaim_reboot(clp, state);
+ case -NFS4ERR_STALE_CLIENTID:
+ case -NFS4ERR_EXPIRED:
+ goto do_state_recovery;
+#if defined(CONFIG_NFS_V4_1)
case -NFS4ERR_BADSESSION:
case -NFS4ERR_BADSLOT:
case -NFS4ERR_BAD_HIGH_SLOT:
nfs4_schedule_state_recovery(clp);
exception->retry = 1;
break;
-#endif /* !defined(CONFIG_NFS_V4_1) */
+#endif /* defined(CONFIG_NFS_V4_1) */
case -NFS4ERR_FILE_OPEN:
if (exception->timeout > HZ) {
/* We have retried a decent amount, time to
}
/* We failed to handle the error */
return nfs4_map_errors(ret);
+do_state_recovery:
+ nfs4_schedule_state_recovery(clp);
+ ret = nfs4_wait_clnt_recover(clp);
+ if (ret == 0)
+ exception->retry = 1;
+ return ret;
}
status = PTR_ERR(state);
if (IS_ERR(state))
goto err_opendata_put;
+ if ((opendata->o_res.rflags & NFS4_OPEN_RESULT_LOCKTYPE_POSIX) != 0)
+ set_bit(NFS_STATE_POSIX_LOCKS, &state->flags);
nfs4_opendata_put(opendata);
nfs4_put_state_owner(sp);
*res = state;
if (state == NULL)
break;
nfs4_state_mark_reclaim_nograce(clp, state);
- case -NFS4ERR_STALE_CLIENTID:
+ goto do_state_recovery;
case -NFS4ERR_STALE_STATEID:
+ if (state == NULL)
+ break;
+ nfs4_state_mark_reclaim_reboot(clp, state);
+ case -NFS4ERR_STALE_CLIENTID:
case -NFS4ERR_EXPIRED:
- rpc_sleep_on(&clp->cl_rpcwaitq, task, NULL);
- nfs4_schedule_state_recovery(clp);
- if (test_bit(NFS4CLNT_MANAGER_RUNNING, &clp->cl_state) == 0)
- rpc_wake_up_queued_task(&clp->cl_rpcwaitq, task);
- task->tk_status = 0;
- return -EAGAIN;
+ goto do_state_recovery;
#if defined(CONFIG_NFS_V4_1)
case -NFS4ERR_BADSESSION:
case -NFS4ERR_BADSLOT:
}
task->tk_status = nfs4_map_errors(task->tk_status);
return 0;
+do_state_recovery:
+ rpc_sleep_on(&clp->cl_rpcwaitq, task, NULL);
+ nfs4_schedule_state_recovery(clp);
+ if (test_bit(NFS4CLNT_MANAGER_RUNNING, &clp->cl_state) == 0)
+ rpc_wake_up_queued_task(&clp->cl_rpcwaitq, task);
+ task->tk_status = 0;
+ return -EAGAIN;
}
static int
.rpc_release = nfs4_lock_release,
};
+static void nfs4_handle_setlk_error(struct nfs_server *server, struct nfs4_lock_state *lsp, int new_lock_owner, int error)
+{
+ struct nfs_client *clp = server->nfs_client;
+ struct nfs4_state *state = lsp->ls_state;
+
+ switch (error) {
+ case -NFS4ERR_ADMIN_REVOKED:
+ case -NFS4ERR_BAD_STATEID:
+ case -NFS4ERR_EXPIRED:
+ if (new_lock_owner != 0 ||
+ (lsp->ls_flags & NFS_LOCK_INITIALIZED) != 0)
+ nfs4_state_mark_reclaim_nograce(clp, state);
+ lsp->ls_seqid.flags &= ~NFS_SEQID_CONFIRMED;
+ break;
+ case -NFS4ERR_STALE_STATEID:
+ if (new_lock_owner != 0 ||
+ (lsp->ls_flags & NFS_LOCK_INITIALIZED) != 0)
+ nfs4_state_mark_reclaim_reboot(clp, state);
+ lsp->ls_seqid.flags &= ~NFS_SEQID_CONFIRMED;
+ };
+}
+
static int _nfs4_do_setlk(struct nfs4_state *state, int cmd, struct file_lock *fl, int recovery_type)
{
struct nfs4_lockdata *data;
ret = nfs4_wait_for_completion_rpc_task(task);
if (ret == 0) {
ret = data->rpc_status;
+ if (ret)
+ nfs4_handle_setlk_error(data->server, data->lsp,
+ data->arg.new_lock_owner, ret);
} else
data->cancelled = 1;
rpc_put_task(task);
{
struct nfs_inode *nfsi = NFS_I(state->inode);
unsigned char fl_flags = request->fl_flags;
- int status;
+ int status = -ENOLCK;
+ if ((fl_flags & FL_POSIX) &&
+ !test_bit(NFS_STATE_POSIX_LOCKS, &state->flags))
+ goto out;
/* Is this a delegated open? */
status = nfs4_set_lock_state(state, request);
if (status != 0)
nfs4_schedule_state_manager(clp);
}
-static int nfs4_state_mark_reclaim_reboot(struct nfs_client *clp, struct nfs4_state *state)
+int nfs4_state_mark_reclaim_reboot(struct nfs_client *clp, struct nfs4_state *state)
{
set_bit(NFS_STATE_RECLAIM_REBOOT, &state->flags);
* If the server returns different values for sessionID, slotID or
* sequence number, the server is looney tunes.
*/
- status = -ESERVERFAULT;
+ status = -EREMOTEIO;
if (memcmp(id.data, res->sr_session->sess_id.data,
NFS4_MAX_SESSIONID_LEN)) {
{ NFS4ERR_BAD_COOKIE, -EBADCOOKIE },
{ NFS4ERR_NOTSUPP, -ENOTSUPP },
{ NFS4ERR_TOOSMALL, -ETOOSMALL },
- { NFS4ERR_SERVERFAULT, -ESERVERFAULT },
+ { NFS4ERR_SERVERFAULT, -EREMOTEIO },
{ NFS4ERR_BADTYPE, -EBADTYPE },
{ NFS4ERR_LOCKED, -EAGAIN },
{ NFS4ERR_SYMLINK, -ELOOP },
}
if (stat <= 10000 || stat > 10100) {
/* The server is looney tunes. */
- return -ESERVERFAULT;
+ return -EREMOTEIO;
}
/* If we cannot translate the error, the recovery routines should
* handle it.
kref_put(&req->wb_kref, nfs_free_request);
}
+static int nfs_wait_bit_uninterruptible(void *word)
+{
+ io_schedule();
+ return 0;
+}
+
/**
* nfs_wait_on_request - Wait for a request to complete.
* @req: request to wait upon.
int
nfs_wait_on_request(struct nfs_page *req)
{
- int ret = 0;
-
- if (!test_bit(PG_BUSY, &req->wb_flags))
- goto out;
- ret = out_of_line_wait_on_bit(&req->wb_flags, PG_BUSY,
- nfs_wait_bit_killable, TASK_KILLABLE);
-out:
- return ret;
+ return wait_on_bit(&req->wb_flags, PG_BUSY,
+ nfs_wait_bit_uninterruptible,
+ TASK_UNINTERRUPTIBLE);
}
/**
static int nfs_get_sb(struct file_system_type *, int, const char *, void *, struct vfsmount *);
static int nfs_xdev_get_sb(struct file_system_type *fs_type,
int flags, const char *dev_name, void *raw_data, struct vfsmount *mnt);
+static void nfs_put_super(struct super_block *);
static void nfs_kill_super(struct super_block *);
static int nfs_remount(struct super_block *sb, int *flags, char *raw_data);
.alloc_inode = nfs_alloc_inode,
.destroy_inode = nfs_destroy_inode,
.write_inode = nfs_write_inode,
+ .put_super = nfs_put_super,
.statfs = nfs_statfs,
.clear_inode = nfs_clear_inode,
.umount_begin = nfs_umount_begin,
.alloc_inode = nfs_alloc_inode,
.destroy_inode = nfs_destroy_inode,
.write_inode = nfs_write_inode,
+ .put_super = nfs_put_super,
.statfs = nfs_statfs,
.clear_inode = nfs4_clear_inode,
.umount_begin = nfs_umount_begin,
goto out;
}
+/*
+ * Ensure that we unregister the bdi before kill_anon_super
+ * releases the device name
+ */
+static void nfs_put_super(struct super_block *s)
+{
+ struct nfs_server *server = NFS_SB(s);
+
+ bdi_unregister(&server->backing_dev_info);
+}
+
/*
* Destroy an NFS2/3 superblock
*/
struct nfs_server *server = NFS_SB(s);
kill_anon_super(s);
- bdi_unregister(&server->backing_dev_info);
nfs_fscache_release_super_cookie(s);
nfs_free_server(server);
}
#include "callback.h"
+#ifdef CONFIG_NFS_V4
static const int nfs_set_port_min = 0;
static const int nfs_set_port_max = 65535;
+#endif
static struct ctl_table_header *nfs_callback_sysctl_table;
static ctl_table nfs_cb_sysctls[] = {
#if defined(CONFIG_NFS_V3) || defined(CONFIG_NFS_V4)
-void nfs_commitdata_release(void *data)
+static void nfs_commitdata_release(void *data)
{
struct nfs_write_data *wdata = data;
break;
}
ret = nfs_wait_on_request(req);
+ nfs_release_request(req);
if (ret < 0)
goto out;
}
struct nfs_page *req;
int ret;
- if (PageFsCache(page))
- nfs_fscache_release_page(page, GFP_KERNEL);
+ nfs_fscache_release_page(page, GFP_KERNEL);
req = nfs_find_and_lock_request(page);
ret = PTR_ERR(req);
static struct svc_export *find_fsidzero_export(struct svc_rqst *rqstp)
{
- struct svc_export *exp;
u32 fsidv[2];
mk_fsid(FSID_NUM, fsidv, 0, 0, 0, NULL);
- exp = rqst_exp_find(rqstp, FSID_NUM, fsidv);
- /*
- * We shouldn't have accepting an nfsv4 request at all if we
- * don't have a pseudoexport!:
- */
- if (IS_ERR(exp) && PTR_ERR(exp) == -ENOENT)
- exp = ERR_PTR(-ESERVERFAULT);
- return exp;
+ return rqst_exp_find(rqstp, FSID_NUM, fsidv);
}
/*
flags, current_cred());
if (IS_ERR(*filp))
host_err = PTR_ERR(*filp);
+ else
+ host_err = ima_file_check(*filp, access);
out_nfserr:
err = nfserrno(host_err);
out:
*/
path.mnt = exp->ex_path.mnt;
path.dentry = dentry;
- err = ima_path_check(&path, acc & (MAY_READ | MAY_WRITE | MAY_EXEC));
nfsd_out:
return err? nfserrno(err) : 0;
}
|| sci->sc_seq_request != sci->sc_seq_done);
spin_unlock(&sci->sc_state_lock);
- if (flag || nilfs_segctor_confirm(sci))
+ if (flag || !nilfs_segctor_confirm(sci))
nilfs_segctor_write_out(sci);
WARN_ON(!list_empty(&sci->sc_copied_buffers));
return ret;
}
-/*
+/*
* ocfs2_dio_end_io is called by the dio core when a dio is finished. We're
* particularly interested in the aio/dio case. Like the core uses
* i_alloc_sem, we use the rw_lock DLM lock to protect io on one node from
ret = blockdev_direct_IO_no_locking(rw, iocb, inode,
inode->i_sb->s_bdev, iov, offset,
- nr_segs,
+ nr_segs,
ocfs2_direct_IO_get_blocks,
ocfs2_dio_end_io);
}
ocfs2_metadata_cache_io_unlock(ci);
- mlog(ML_BH_IO, "block=(%llu), nr=(%d), cached=%s, flags=0x%x\n",
+ mlog(ML_BH_IO, "block=(%llu), nr=(%d), cached=%s, flags=0x%x\n",
(unsigned long long)block, nr,
((flags & OCFS2_BH_IGNORE_CACHE) || ignore_cache) ? "no" : "yes",
flags);
unsigned int o2hb_dead_threshold = O2HB_DEFAULT_DEAD_THRESHOLD;
-/* Only sets a new threshold if there are no active regions.
+/* Only sets a new threshold if there are no active regions.
*
* No locking or otherwise interesting code is required for reading
* o2hb_dead_threshold as it can't change once regions are active and
mlog(ML_ERROR, "Heartbeat write timeout to device %s after %u "
"milliseconds\n", reg->hr_dev_name,
- jiffies_to_msecs(jiffies - reg->hr_last_timeout_start));
+ jiffies_to_msecs(jiffies - reg->hr_last_timeout_start));
o2quo_disk_timeout();
}
"seq %llu last %llu changed %u equal %u\n",
slot->ds_node_num, (long long)slot->ds_last_generation,
le32_to_cpu(hb_block->hb_cksum),
- (unsigned long long)le64_to_cpu(hb_block->hb_seq),
+ (unsigned long long)le64_to_cpu(hb_block->hb_seq),
(unsigned long long)slot->ds_last_time, slot->ds_changed_samples,
slot->ds_equal_samples);
}
if (was_valid && !valid) {
- printk(KERN_INFO "o2net: no longer connected to "
+ printk(KERN_NOTICE "o2net: no longer connected to "
SC_NODEF_FMT "\n", SC_NODEF_ARGS(old_sc));
o2net_complete_nodes_nsw(nn);
}
if (!was_valid && valid) {
o2quo_conn_up(o2net_num_from_nn(nn));
cancel_delayed_work(&nn->nn_connect_expired);
- printk(KERN_INFO "o2net: %s " SC_NODEF_FMT "\n",
+ printk(KERN_NOTICE "o2net: %s " SC_NODEF_FMT "\n",
o2nm_this_node() > sc->sc_node->nd_num ?
"connected to" : "accepted connection from",
SC_NODEF_ARGS(sc));
cond_resched();
continue;
}
- mlog(ML_ERROR, "sendpage of size %zu to " SC_NODEF_FMT
+ mlog(ML_ERROR, "sendpage of size %zu to " SC_NODEF_FMT
" failed with %zd\n", size, SC_NODEF_ARGS(sc), ret);
o2net_ensure_shutdown(nn, sc, 0);
break;
do_gettimeofday(&now);
- printk(KERN_INFO "o2net: connection to " SC_NODEF_FMT " has been idle for %u.%u "
+ printk(KERN_NOTICE "o2net: connection to " SC_NODEF_FMT " has been idle for %u.%u "
"seconds, shutting it down.\n", SC_NODEF_ARGS(sc),
o2net_idle_timeout() / 1000,
o2net_idle_timeout() % 1000);
mlog(ML_NOTICE, "here are some times that might help debug the "
"situation: (tmr %ld.%ld now %ld.%ld dr %ld.%ld adv "
"%ld.%ld:%ld.%ld func (%08x:%u) %ld.%ld:%ld.%ld)\n",
- sc->sc_tv_timer.tv_sec, (long) sc->sc_tv_timer.tv_usec,
+ sc->sc_tv_timer.tv_sec, (long) sc->sc_tv_timer.tv_usec,
now.tv_sec, (long) now.tv_usec,
sc->sc_tv_data_ready.tv_sec, (long) sc->sc_tv_data_ready.tv_usec,
sc->sc_tv_advance_start.tv_sec,
* on their number */
#define O2NET_QUORUM_DELAY_MS ((o2hb_dead_threshold + 2) * O2HB_REGION_TIMEOUT_MS)
-/*
+/*
* This version number represents quite a lot, unfortunately. It not
* only represents the raw network message protocol on the wire but also
- * locking semantics of the file system using the protocol. It should
+ * locking semantics of the file system using the protocol. It should
* be somewhere else, I'm sure, but right now it isn't.
*
* With version 11, we separate out the filesystem locking portion. The
mlog(ML_ERROR, "dlm status = %s\n", dlm_errname((st))); \
} while (0)
-#define DLM_LKSB_UNUSED1 0x01
+#define DLM_LKSB_UNUSED1 0x01
#define DLM_LKSB_PUT_LVB 0x02
#define DLM_LKSB_GET_LVB 0x04
#define DLM_LKSB_UNUSED2 0x08
dlm_lock_put(lock);
/* free up the reserved bast that we are cancelling.
* guaranteed that this will not be the last reserved
- * ast because *both* an ast and a bast were reserved
+ * ast because *both* an ast and a bast were reserved
* to get to this point. the res->spinlock will not be
* taken here */
dlm_lockres_release_ast(dlm, res);
/* instead of logging the same network error over
* and over, sleep here and wait for the heartbeat
* to notice the node is dead. times out after 5s. */
- dlm_wait_for_node_death(dlm, res->owner,
+ dlm_wait_for_node_death(dlm, res->owner,
DLM_NODE_DEATH_WAIT_MAX);
ret = DLM_RECOVERING;
mlog(0, "node %u died so returning DLM_RECOVERING "
assert_spin_locked(&res->spinlock);
stringify_lockname(res->lockname.name, res->lockname.len,
- buf, sizeof(buf) - 1);
+ buf, sizeof(buf));
printk("lockres: %s, owner=%u, state=%u\n",
buf, res->owner, res->state);
printk(" last used: %lu, refcnt: %u, on purge list: %s\n",
}
/* Once the dlm ctxt is marked as leaving then we don't want
- * to be put in someone's domain map.
+ * to be put in someone's domain map.
* Also, explicitly disallow joining at certain troublesome
* times (ie. during recovery). */
if (dlm && dlm->dlm_state != DLM_CTXT_LEAVING) {
}
dlm_revert_pending_lock(res, lock);
dlm_lock_put(lock);
- } else if (dlm_is_recovery_lock(res->lockname.name,
+ } else if (dlm_is_recovery_lock(res->lockname.name,
res->lockname.len)) {
/* special case for the $RECOVERY lock.
* there will never be an AST delivered to put
struct dlm_master_list_entry *mle;
assert_spin_locked(&dlm->spinlock);
-
+
list_for_each_entry(mle, &dlm->mle_hb_events, hb_events) {
if (node_up)
dlm_mle_node_up(dlm, mle, NULL, idx);
__dlm_insert_mle(dlm, mle);
/* still holding the dlm spinlock, check the recovery map
- * to see if there are any nodes that still need to be
+ * to see if there are any nodes that still need to be
* considered. these will not appear in the mle nodemap
* but they might own this lockres. wait on them. */
bit = find_next_bit(dlm->recovery_map, O2NM_MAX_NODES, 0);
msleep(500);
}
continue;
- }
+ }
dlm_kick_recovery_thread(dlm);
msleep(1000);
res->lockname.name, blocked);
if (++tries > 20) {
mlog(ML_ERROR, "%s:%.*s: spinning on "
- "dlm_wait_for_lock_mastery, blocked=%d\n",
- dlm->name, res->lockname.len,
+ "dlm_wait_for_lock_mastery, blocked=%d\n",
+ dlm->name, res->lockname.len,
res->lockname.name, blocked);
dlm_print_one_lock_resource(res);
dlm_print_one_mle(mle);
ret = dlm_restart_lock_mastery(dlm, res, mle, *blocked);
b = (mle->type == DLM_MLE_BLOCK);
if ((*blocked && !b) || (!*blocked && b)) {
- mlog(0, "%s:%.*s: status change: old=%d new=%d\n",
+ mlog(0, "%s:%.*s: status change: old=%d new=%d\n",
dlm->name, res->lockname.len, res->lockname.name,
*blocked, b);
*blocked = b;
}
mlog(0, "%u is the owner of %.*s, cleaning everyone else\n",
dlm->node_num, res->lockname.len, res->lockname.name);
- ret = dlm_dispatch_assert_master(dlm, res, 0, request->node_idx,
+ ret = dlm_dispatch_assert_master(dlm, res, 0, request->node_idx,
DLM_ASSERT_MASTER_MLE_CLEANUP);
if (ret < 0) {
mlog(ML_ERROR, "failed to dispatch assert master work\n");
if (r & DLM_ASSERT_RESPONSE_REASSERT) {
mlog(0, "%.*s: node %u create mles on other "
- "nodes and requests a re-assert\n",
+ "nodes and requests a re-assert\n",
namelen, lockname, to);
reassert = 1;
}
spin_unlock(&dlm->master_lock);
spin_unlock(&dlm->spinlock);
goto done;
- }
+ }
}
}
spin_unlock(&dlm->master_lock);
int extra_ref = 0;
int nn = -1;
int rr, err = 0;
-
+
spin_lock(&mle->spinlock);
if (mle->type == DLM_MLE_BLOCK || mle->type == DLM_MLE_MIGRATION)
extra_ref = 1;
/* MASTER mle: if any bits set in the response map
* then the calling node needs to re-assert to clear
* up nodes that this node contacted */
- while ((nn = find_next_bit (mle->response_map, O2NM_MAX_NODES,
+ while ((nn = find_next_bit (mle->response_map, O2NM_MAX_NODES,
nn+1)) < O2NM_MAX_NODES) {
if (nn != dlm->node_num && nn != assert->node_idx)
master_request = 1;
__dlm_print_one_lock_resource(res);
spin_unlock(&res->spinlock);
spin_unlock(&dlm->spinlock);
- *ret_data = (void *)res;
+ *ret_data = (void *)res;
dlm_put(dlm);
return -EINVAL;
}
item->u.am.request_from = request_from;
item->u.am.flags = flags;
- if (ignore_higher)
- mlog(0, "IGNORE HIGHER: %.*s\n", res->lockname.len,
+ if (ignore_higher)
+ mlog(0, "IGNORE HIGHER: %.*s\n", res->lockname.len,
res->lockname.name);
-
+
spin_lock(&dlm->work_lock);
list_add_tail(&item->list, &dlm->work_list);
spin_unlock(&dlm->work_lock);
* think that $RECOVERY is currently mastered by a dead node. If so,
* we wait a short time to allow that node to get notified by its own
* heartbeat stack, then check again. All $RECOVERY lock resources
- * mastered by dead nodes are purged when the hearbeat callback is
+ * mastered by dead nodes are purged when the hearbeat callback is
* fired, so we can know for sure that it is safe to continue once
* the node returns a live node or no node. */
static int dlm_pre_master_reco_lockres(struct dlm_ctxt *dlm,
ret = -EAGAIN;
}
spin_unlock(&dlm->spinlock);
- mlog(0, "%s: reco lock master is %u\n", dlm->name,
+ mlog(0, "%s: reco lock master is %u\n", dlm->name,
master);
break;
}
mlog(0, "%s:%.*s: timed out during migration\n",
dlm->name, res->lockname.len, res->lockname.name);
- /* avoid hang during shutdown when migrating lockres
+ /* avoid hang during shutdown when migrating lockres
* to a node which also goes down */
if (dlm_is_node_dead(dlm, target)) {
mlog(0, "%s:%.*s: expected migration "
can_proceed = !!(res->state & DLM_LOCK_RES_MIGRATING);
spin_unlock(&res->spinlock);
- /* target has died, so make the caller break out of the
+ /* target has died, so make the caller break out of the
* wait_event, but caller must recheck the domain_map */
spin_lock(&dlm->spinlock);
if (!test_bit(mig_target, dlm->domain_map))
if (lock->ml.node == dead_node) {
mlog(0, "AHA! there was "
"a $RECOVERY lock for dead "
- "node %u (%s)!\n",
+ "node %u (%s)!\n",
dead_node, dlm->name);
list_del_init(&lock->list);
dlm_lock_put(lock);
mres->master = master;
}
+static void dlm_prepare_lvb_for_migration(struct dlm_lock *lock,
+ struct dlm_migratable_lockres *mres,
+ int queue)
+{
+ if (!lock->lksb)
+ return;
+
+ /* Ignore lvb in all locks in the blocked list */
+ if (queue == DLM_BLOCKED_LIST)
+ return;
+
+ /* Only consider lvbs in locks with granted EX or PR lock levels */
+ if (lock->ml.type != LKM_EXMODE && lock->ml.type != LKM_PRMODE)
+ return;
+
+ if (dlm_lvb_is_empty(mres->lvb)) {
+ memcpy(mres->lvb, lock->lksb->lvb, DLM_LVB_LEN);
+ return;
+ }
+
+ /* Ensure the lvb copied for migration matches in other valid locks */
+ if (!memcmp(mres->lvb, lock->lksb->lvb, DLM_LVB_LEN))
+ return;
+
+ mlog(ML_ERROR, "Mismatched lvb in lock cookie=%u:%llu, name=%.*s, "
+ "node=%u\n",
+ dlm_get_lock_cookie_node(be64_to_cpu(lock->ml.cookie)),
+ dlm_get_lock_cookie_seq(be64_to_cpu(lock->ml.cookie)),
+ lock->lockres->lockname.len, lock->lockres->lockname.name,
+ lock->ml.node);
+ dlm_print_one_lock_resource(lock->lockres);
+ BUG();
+}
/* returns 1 if this lock fills the network structure,
* 0 otherwise */
ml->list = queue;
if (lock->lksb) {
ml->flags = lock->lksb->flags;
- /* send our current lvb */
- if (ml->type == LKM_EXMODE ||
- ml->type == LKM_PRMODE) {
- /* if it is already set, this had better be a PR
- * and it has to match */
- if (!dlm_lvb_is_empty(mres->lvb) &&
- (ml->type == LKM_EXMODE ||
- memcmp(mres->lvb, lock->lksb->lvb, DLM_LVB_LEN))) {
- mlog(ML_ERROR, "mismatched lvbs!\n");
- dlm_print_one_lock_resource(lock->lockres);
- BUG();
- }
- memcpy(mres->lvb, lock->lksb->lvb, DLM_LVB_LEN);
- }
+ dlm_prepare_lvb_for_migration(lock, mres, queue);
}
ml->node = lock->ml.node;
mres->num_locks++;
struct dlm_lock *lock = NULL;
u8 from = O2NM_MAX_NODES;
unsigned int added = 0;
+ __be64 c;
mlog(0, "running %d locks for this lockres\n", mres->num_locks);
for (i=0; i<mres->num_locks; i++) {
/* lock is always created locally first, and
* destroyed locally last. it must be on the list */
if (!lock) {
- __be64 c = ml->cookie;
- mlog(ML_ERROR, "could not find local lock "
- "with cookie %u:%llu!\n",
+ c = ml->cookie;
+ mlog(ML_ERROR, "Could not find local lock "
+ "with cookie %u:%llu, node %u, "
+ "list %u, flags 0x%x, type %d, "
+ "conv %d, highest blocked %d\n",
dlm_get_lock_cookie_node(be64_to_cpu(c)),
- dlm_get_lock_cookie_seq(be64_to_cpu(c)));
+ dlm_get_lock_cookie_seq(be64_to_cpu(c)),
+ ml->node, ml->list, ml->flags, ml->type,
+ ml->convert_type, ml->highest_blocked);
+ __dlm_print_one_lock_resource(res);
+ BUG();
+ }
+
+ if (lock->ml.node != ml->node) {
+ c = lock->ml.cookie;
+ mlog(ML_ERROR, "Mismatched node# in lock "
+ "cookie %u:%llu, name %.*s, node %u\n",
+ dlm_get_lock_cookie_node(be64_to_cpu(c)),
+ dlm_get_lock_cookie_seq(be64_to_cpu(c)),
+ res->lockname.len, res->lockname.name,
+ lock->ml.node);
+ c = ml->cookie;
+ mlog(ML_ERROR, "Migrate lock cookie %u:%llu, "
+ "node %u, list %u, flags 0x%x, type %d, "
+ "conv %d, highest blocked %d\n",
+ dlm_get_lock_cookie_node(be64_to_cpu(c)),
+ dlm_get_lock_cookie_seq(be64_to_cpu(c)),
+ ml->node, ml->list, ml->flags, ml->type,
+ ml->convert_type, ml->highest_blocked);
__dlm_print_one_lock_resource(res);
BUG();
}
- BUG_ON(lock->ml.node != ml->node);
if (tmpq != queue) {
- mlog(0, "lock was on %u instead of %u for %.*s\n",
- j, ml->list, res->lockname.len, res->lockname.name);
+ c = ml->cookie;
+ mlog(0, "Lock cookie %u:%llu was on list %u "
+ "instead of list %u for %.*s\n",
+ dlm_get_lock_cookie_node(be64_to_cpu(c)),
+ dlm_get_lock_cookie_seq(be64_to_cpu(c)),
+ j, ml->list, res->lockname.len,
+ res->lockname.name);
+ __dlm_print_one_lock_resource(res);
spin_unlock(&res->spinlock);
continue;
}
* the lvb. */
memcpy(res->lvb, mres->lvb, DLM_LVB_LEN);
} else {
- /* otherwise, the node is sending its
+ /* otherwise, the node is sending its
* most recent valid lvb info */
BUG_ON(ml->type != LKM_EXMODE &&
ml->type != LKM_PRMODE);
spin_lock(&res->spinlock);
list_for_each_entry(lock, queue, list) {
if (lock->ml.cookie == ml->cookie) {
- __be64 c = lock->ml.cookie;
+ c = lock->ml.cookie;
mlog(ML_ERROR, "%s:%.*s: %u:%llu: lock already "
"exists on this lockres!\n", dlm->name,
res->lockname.len, res->lockname.name,
assert_spin_locked(&res->spinlock);
if (res->owner == dlm->node_num)
- /* if this node owned the lockres, and if the dead node
+ /* if this node owned the lockres, and if the dead node
* had an EX when he died, blank out the lvb */
search_node = dead_node;
else {
/* this node is the lockres master:
* 1) remove any stale locks for the dead node
- * 2) if the dead node had an EX when he died, blank out the lvb
+ * 2) if the dead node had an EX when he died, blank out the lvb
*/
assert_spin_locked(&dlm->spinlock);
assert_spin_locked(&res->spinlock);
mlog(0, "%s:%.*s: freed %u locks for dead node %u, "
"dropping ref from lockres\n", dlm->name,
res->lockname.len, res->lockname.name, freed, dead_node);
- BUG_ON(!test_bit(dead_node, res->refmap));
+ if(!test_bit(dead_node, res->refmap)) {
+ mlog(ML_ERROR, "%s:%.*s: freed %u locks for dead node %u, "
+ "but ref was not set\n", dlm->name,
+ res->lockname.len, res->lockname.name, freed, dead_node);
+ __dlm_print_one_lock_resource(res);
+ }
dlm_lockres_clear_refmap_bit(dead_node, res);
} else if (test_bit(dead_node, res->refmap)) {
mlog(0, "%s:%.*s: dead node %u had a ref, but had "
}
spin_unlock(&res->spinlock);
continue;
- }
+ }
spin_lock(&res->spinlock);
/* zero the lvb if necessary */
dlm_revalidate_lvb(dlm, res, dead_node);
* this function on each node racing to become the recovery
* master will not stop attempting this until either:
* a) this node gets the EX (and becomes the recovery master),
- * or b) dlm->reco.new_master gets set to some nodenum
+ * or b) dlm->reco.new_master gets set to some nodenum
* != O2NM_INVALID_NODE_NUM (another node will do the reco).
* so each time a recovery master is needed, the entire cluster
* will sync at this point. if the new master dies, that will
mlog(0, "starting recovery of %s at %lu, dead=%u, this=%u\n",
dlm->name, jiffies, dlm->reco.dead_node, dlm->node_num);
-again:
+again:
memset(&lksb, 0, sizeof(lksb));
ret = dlmlock(dlm, LKM_EXMODE, &lksb, LKM_NOQUEUE|LKM_RECOVERY,
if (ret == DLM_NORMAL) {
mlog(0, "dlm=%s dlmlock says I got it (this=%u)\n",
dlm->name, dlm->node_num);
-
- /* got the EX lock. check to see if another node
+
+ /* got the EX lock. check to see if another node
* just became the reco master */
if (dlm_reco_master_ready(dlm)) {
mlog(0, "%s: got reco EX lock, but %u will "
/* see if recovery was already finished elsewhere */
spin_lock(&dlm->spinlock);
if (dlm->reco.dead_node == O2NM_INVALID_NODE_NUM) {
- status = -EINVAL;
+ status = -EINVAL;
mlog(0, "%s: got reco EX lock, but "
"node got recovered already\n", dlm->name);
if (dlm->reco.new_master != O2NM_INVALID_NODE_NUM) {
mlog(ML_ERROR, "%s: new master is %u "
- "but no dead node!\n",
+ "but no dead node!\n",
dlm->name, dlm->reco.new_master);
BUG();
}
* set the master and send the messages to begin recovery */
if (!status) {
mlog(0, "%s: dead=%u, this=%u, sending "
- "begin_reco now\n", dlm->name,
+ "begin_reco now\n", dlm->name,
dlm->reco.dead_node, dlm->node_num);
status = dlm_send_begin_reco_message(dlm,
dlm->reco.dead_node);
mlog(0, "dlm=%s dlmlock says another node got it (this=%u)\n",
dlm->name, dlm->node_num);
/* another node is master. wait on
- * reco.new_master != O2NM_INVALID_NODE_NUM
+ * reco.new_master != O2NM_INVALID_NODE_NUM
* for at most one second */
wait_event_timeout(dlm->dlm_reco_thread_wq,
dlm_reco_master_ready(dlm),
"begin reco msg (%d)\n", dlm->name, nodenum, ret);
ret = 0;
}
- if (ret == -EAGAIN) {
+
+ /*
+ * Prior to commit aad1b15310b9bcd59fa81ab8f2b1513b59553ea8,
+ * dlm_begin_reco_handler() returned EAGAIN and not -EAGAIN.
+ * We are handling both for compatibility reasons.
+ */
+ if (ret == -EAGAIN || ret == EAGAIN) {
mlog(0, "%s: trying to start recovery of node "
"%u, but node %u is waiting for last recovery "
"to complete, backoff for a bit\n", dlm->name,
}
if (ret < 0) {
struct dlm_lock_resource *res;
- /* this is now a serious problem, possibly ENOMEM
+ /* this is now a serious problem, possibly ENOMEM
* in the network stack. must retry */
mlog_errno(ret);
mlog(ML_ERROR, "begin reco of dlm %s to node %u "
} else {
mlog(ML_ERROR, "recovery lock not found\n");
}
- /* sleep for a bit in hopes that we can avoid
+ /* sleep for a bit in hopes that we can avoid
* another ENOMEM */
msleep(100);
goto retry;
}
if (dlm->reco.dead_node != O2NM_INVALID_NODE_NUM) {
mlog(ML_NOTICE, "%s: dead_node previously set to %u, "
- "node %u changing it to %u\n", dlm->name,
+ "node %u changing it to %u\n", dlm->name,
dlm->reco.dead_node, br->node_idx, br->dead_node);
}
dlm_set_reco_master(dlm, br->node_idx);
if (ret < 0) {
mlog_errno(ret);
if (dlm_is_host_down(ret)) {
- /* this has no effect on this recovery
- * session, so set the status to zero to
+ /* this has no effect on this recovery
+ * session, so set the status to zero to
* finish out the last recovery */
mlog(ML_ERROR, "node %u went down after this "
"node finished recovery.\n", nodenum);
mlog(0, "%s: node %u finalizing recovery stage%d of "
"node %u (%u:%u)\n", dlm->name, fr->node_idx, stage,
fr->dead_node, dlm->reco.dead_node, dlm->reco.new_master);
-
+
spin_lock(&dlm->spinlock);
if (dlm->reco.new_master != fr->node_idx) {
actions &= ~(DLM_UNLOCK_REMOVE_LOCK|
DLM_UNLOCK_REGRANT_LOCK|
DLM_UNLOCK_CLEAR_CONVERT_TYPE);
- } else if (status == DLM_RECOVERING ||
- status == DLM_MIGRATING ||
+ } else if (status == DLM_RECOVERING ||
+ status == DLM_MIGRATING ||
status == DLM_FORWARD) {
/* must clear the actions because this unlock
* is about to be retried. cannot free or do
if (call_ast) {
mlog(0, "calling unlockast(%p, %d)\n", data, status);
if (is_master) {
- /* it is possible that there is one last bast
+ /* it is possible that there is one last bast
* pending. make sure it is flushed, then
* call the unlockast.
* not an issue if this is a mastered remotely,
* since this lock has been removed from the
* lockres queues and cannot be found. */
dlm_kick_thread(dlm, NULL);
- wait_event(dlm->ast_wq,
+ wait_event(dlm->ast_wq,
dlm_lock_basts_flushed(dlm, lock));
}
(*unlockast)(data, status);
lockres_or_flags(lockres, OCFS2_LOCK_NEEDS_REFRESH);
lockres->l_level = lockres->l_requested;
+
+ /*
+ * We set the OCFS2_LOCK_UPCONVERT_FINISHING flag before clearing
+ * the OCFS2_LOCK_BUSY flag to prevent the dc thread from
+ * downconverting the lock before the upconvert has fully completed.
+ */
+ lockres_or_flags(lockres, OCFS2_LOCK_UPCONVERT_FINISHING);
+
lockres_clear_flags(lockres, OCFS2_LOCK_BUSY);
mlog_exit_void();
assert_spin_locked(&lockres->l_lock);
- lockres_or_flags(lockres, OCFS2_LOCK_BLOCKED);
-
if (level > lockres->l_blocking) {
/* only schedule a downconvert if we haven't already scheduled
* one that goes low enough to satisfy the level we're
lockres->l_blocking = level;
}
+ if (needs_downconvert)
+ lockres_or_flags(lockres, OCFS2_LOCK_BLOCKED);
+
mlog_exit(needs_downconvert);
return needs_downconvert;
}
mlog_entry_void();
spin_lock_irqsave(&lockres->l_lock, flags);
lockres_clear_flags(lockres, OCFS2_LOCK_BUSY);
+ lockres_clear_flags(lockres, OCFS2_LOCK_UPCONVERT_FINISHING);
if (convert)
lockres->l_action = OCFS2_AST_INVALID;
else
again:
wait = 0;
+ spin_lock_irqsave(&lockres->l_lock, flags);
+
if (catch_signals && signal_pending(current)) {
ret = -ERESTARTSYS;
- goto out;
+ goto unlock;
}
- spin_lock_irqsave(&lockres->l_lock, flags);
-
mlog_bug_on_msg(lockres->l_flags & OCFS2_LOCK_FREEING,
"Cluster lock called on freeing lockres %s! flags "
"0x%lx\n", lockres->l_name, lockres->l_flags);
goto unlock;
}
+ if (lockres->l_flags & OCFS2_LOCK_UPCONVERT_FINISHING) {
+ /*
+ * We've upconverted. If the lock now has a level we can
+ * work with, we take it. If, however, the lock is not at the
+ * required level, we go thru the full cycle. One way this could
+ * happen is if a process requesting an upconvert to PR is
+ * closely followed by another requesting upconvert to an EX.
+ * If the process requesting EX lands here, we want it to
+ * continue attempting to upconvert and let the process
+ * requesting PR take the lock.
+ * If multiple processes request upconvert to PR, the first one
+ * here will take the lock. The others will have to go thru the
+ * OCFS2_LOCK_BLOCKED check to ensure that there is no pending
+ * downconvert request.
+ */
+ if (level <= lockres->l_level)
+ goto update_holders;
+ }
+
if (lockres->l_flags & OCFS2_LOCK_BLOCKED &&
!ocfs2_may_continue_on_blocked_lock(lockres, level)) {
/* is the lock is currently blocked on behalf of
goto again;
}
+update_holders:
/* Ok, if we get here then we're good to go. */
ocfs2_inc_holders(lockres, level);
ret = 0;
unlock:
+ lockres_clear_flags(lockres, OCFS2_LOCK_UPCONVERT_FINISHING);
+
spin_unlock_irqrestore(&lockres->l_lock, flags);
out:
/*
/* Mark the lockres as being dropped. It will no longer be
* queued if blocking, but we still may have to wait on it
* being dequeued from the downconvert thread before we can consider
- * it safe to drop.
+ * it safe to drop.
*
* You can *not* attempt to call cluster_lock on this lockres anymore. */
void ocfs2_mark_lockres_freeing(struct ocfs2_lock_res *lockres)
unsigned long flags;
int blocking;
int new_level;
+ int level;
int ret = 0;
int set_lvb = 0;
unsigned int gen;
spin_lock_irqsave(&lockres->l_lock, flags);
- BUG_ON(!(lockres->l_flags & OCFS2_LOCK_BLOCKED));
-
recheck:
+ /*
+ * Is it still blocking? If not, we have no more work to do.
+ */
+ if (!(lockres->l_flags & OCFS2_LOCK_BLOCKED)) {
+ BUG_ON(lockres->l_blocking != DLM_LOCK_NL);
+ spin_unlock_irqrestore(&lockres->l_lock, flags);
+ ret = 0;
+ goto leave;
+ }
+
if (lockres->l_flags & OCFS2_LOCK_BUSY) {
/* XXX
* This is a *big* race. The OCFS2_LOCK_PENDING flag
goto leave;
}
+ /*
+ * This prevents livelocks. OCFS2_LOCK_UPCONVERT_FINISHING flag is
+ * set when the ast is received for an upconvert just before the
+ * OCFS2_LOCK_BUSY flag is cleared. Now if the fs received a bast
+ * on the heels of the ast, we want to delay the downconvert just
+ * enough to allow the up requestor to do its task. Because this
+ * lock is in the blocked queue, the lock will be downconverted
+ * as soon as the requestor is done with the lock.
+ */
+ if (lockres->l_flags & OCFS2_LOCK_UPCONVERT_FINISHING)
+ goto leave_requeue;
+
+ /*
+ * How can we block and yet be at NL? We were trying to upconvert
+ * from NL and got canceled. The code comes back here, and now
+ * we notice and clear BLOCKING.
+ */
+ if (lockres->l_level == DLM_LOCK_NL) {
+ BUG_ON(lockres->l_ex_holders || lockres->l_ro_holders);
+ lockres->l_blocking = DLM_LOCK_NL;
+ lockres_clear_flags(lockres, OCFS2_LOCK_BLOCKED);
+ spin_unlock_irqrestore(&lockres->l_lock, flags);
+ goto leave;
+ }
+
/* if we're blocking an exclusive and we have *any* holders,
* then requeue. */
if ((lockres->l_blocking == DLM_LOCK_EX)
* may sleep, so we save off a copy of what we're blocking as
* it may change while we're not holding the spin lock. */
blocking = lockres->l_blocking;
+ level = lockres->l_level;
spin_unlock_irqrestore(&lockres->l_lock, flags);
ctl->unblock_action = lockres->l_ops->downconvert_worker(lockres, blocking);
goto leave;
spin_lock_irqsave(&lockres->l_lock, flags);
- if (blocking != lockres->l_blocking) {
+ if ((blocking != lockres->l_blocking) || (level != lockres->l_level)) {
/* If this changed underneath us, then we can't drop
* it just yet. */
goto recheck;
mlog(0, "Encoding parent: blkno: %llu, generation: %u\n",
(unsigned long long)blkno, generation);
}
-
+
*max_len = len;
bail:
emi->ei_clusters += ins->ei_clusters;
return 1;
} else if ((ins->ei_phys + ins->ei_clusters) == emi->ei_phys &&
- (ins->ei_cpos + ins->ei_clusters) == emi->ei_phys &&
+ (ins->ei_cpos + ins->ei_clusters) == emi->ei_cpos &&
ins->ei_flags == emi->ei_flags) {
emi->ei_phys = ins->ei_phys;
emi->ei_cpos = ins->ei_cpos;
int ret;
offset = (size & (PAGE_CACHE_SIZE-1)); /* Within page */
- /* ugh. in prepare/commit_write, if from==to==start of block, we
+ /* ugh. in prepare/commit_write, if from==to==start of block, we
** skip the prepare. make sure we never send an offset for the start
** of a block
*/
struct inode *inode = dentry->d_inode;
loff_t saved_pos, end;
- /*
+ /*
* We start with a read level meta lock and only jump to an ex
* if we need to make modifications here.
*/
/* buffered aio wouldn't have proper lock coverage today */
BUG_ON(ret == -EIOCBQUEUED && !(file->f_flags & O_DIRECT));
- if ((file->f_flags & O_DSYNC && !direct_io) || IS_SYNC(inode) ||
- (file->f_flags & O_DIRECT && has_refcount)) {
+ if (((file->f_flags & O_DSYNC) && !direct_io) || IS_SYNC(inode) ||
+ ((file->f_flags & O_DIRECT) && has_refcount)) {
ret = filemap_fdatawrite_range(file->f_mapping, pos,
pos + count - 1);
if (ret < 0)
pos + count - 1);
}
- /*
+ /*
* deep in g_f_a_w_n()->ocfs2_direct_IO we pass in a ocfs2_dio_end_io
* function pointer which is called when o_direct io completes so that
* it can unlock our rw lock. (it's the clustered equivalent of
goto bail;
}
- /*
+ /*
* buffered reads protect themselves in ->readpage(). O_DIRECT reads
* need locks to protect pending reads from racing with truncate.
*/
* We're fine letting folks race truncates and extending
* writes with read across the cluster, just like they can
* locally. Hence no rw_lock during read.
- *
+ *
* Take and drop the meta data lock to update inode fields
* like i_size. This allows the checks down below
- * generic_file_aio_read() a chance of actually working.
+ * generic_file_aio_read() a chance of actually working.
*/
ret = ocfs2_inode_lock_atime(inode, filp->f_vfsmnt, &lock_level);
if (ret < 0) {
bail:
if (have_alloc_sem)
up_read(&inode->i_alloc_sem);
- if (rw_level != -1)
+ if (rw_level != -1)
ocfs2_rw_unlock(inode, rw_level);
mlog_exit(ret);
if (args->fi_flags & OCFS2_FI_FLAG_ORPHAN_RECOVERY) {
status = ocfs2_try_open_lock(inode, 0);
if (status) {
- make_bad_inode(inode);
+ make_bad_inode(inode);
return status;
}
}
return status;
}
-/*
+/*
* Serialize with orphan dir recovery. If the process doing
* recovery on this orphan dir does an iget() with the dir
* i_mutex held, we'll deadlock here. Instead we detect this
#include <linux/fs.h>
#include <linux/mount.h>
+#include <linux/compat.h>
#define MLOG_MASK_PREFIX ML_INODE
#include <cluster/masklog.h>
#ifdef CONFIG_COMPAT
long ocfs2_compat_ioctl(struct file *file, unsigned cmd, unsigned long arg)
{
+ bool preserve;
+ struct reflink_arguments args;
+ struct inode *inode = file->f_path.dentry->d_inode;
+
switch (cmd) {
case OCFS2_IOC32_GETFLAGS:
cmd = OCFS2_IOC_GETFLAGS;
case OCFS2_IOC_GROUP_EXTEND:
case OCFS2_IOC_GROUP_ADD:
case OCFS2_IOC_GROUP_ADD64:
- case OCFS2_IOC_REFLINK:
break;
+ case OCFS2_IOC_REFLINK:
+ if (copy_from_user(&args, (struct reflink_arguments *)arg,
+ sizeof(args)))
+ return -EFAULT;
+ preserve = (args.preserve != 0);
+
+ return ocfs2_reflink_ioctl(inode, compat_ptr(args.old_path),
+ compat_ptr(args.new_path), preserve);
default:
return -ENOIOCTLCMD;
}
status = -ENOENT;
mlog_errno(status);
return status;
- }
+ }
mutex_lock(&orphan_dir_inode->i_mutex);
status = ocfs2_inode_lock(orphan_dir_inode, NULL, 0);
#define OCFS2_LOCK_PENDING (0x00000400) /* This lockres is pending a
call to dlm_lock. Only
exists with BUSY set. */
+#define OCFS2_LOCK_UPCONVERT_FINISHING (0x00000800) /* blocks the dc thread
+ * from downconverting
+ * before the upconvert
+ * has completed */
struct ocfs2_lock_res_ops;
return blocksize - offsetof(struct ocfs2_dinode, id2.i_symlink);
}
-static inline int ocfs2_max_inline_data(int blocksize)
+static inline int ocfs2_max_inline_data_with_xattr(int blocksize,
+ struct ocfs2_dinode *di)
{
- return blocksize - offsetof(struct ocfs2_dinode, id2.i_data.id_data);
+ if (di && (di->i_dyn_features & OCFS2_INLINE_XATTR_FL))
+ return blocksize -
+ offsetof(struct ocfs2_dinode, id2.i_data.id_data) -
+ di->i_xattr_inline_size;
+ else
+ return blocksize -
+ offsetof(struct ocfs2_dinode, id2.i_data.id_data);
}
static inline int ocfs2_extent_recs_per_inode(int blocksize)
while (offset < end) {
page_index = offset >> PAGE_CACHE_SHIFT;
- map_end = (page_index + 1) << PAGE_CACHE_SHIFT;
+ map_end = ((loff_t)page_index + 1) << PAGE_CACHE_SHIFT;
if (map_end > end)
map_end = end;
page = grab_cache_page(mapping, page_index);
- /* This page can't be dirtied before we CoW it out. */
- BUG_ON(PageDirty(page));
+ /*
+ * In case PAGE_CACHE_SIZE <= CLUSTER_SIZE, This page
+ * can't be dirtied before we CoW it out.
+ */
+ if (PAGE_CACHE_SIZE <= OCFS2_SB(sb)->s_clustersize)
+ BUG_ON(PageDirty(page));
if (!PageUptodate(page)) {
ret = block_read_full_page(page, ocfs2_get_block);
while (offset < end) {
page_index = offset >> PAGE_CACHE_SHIFT;
- map_end = (page_index + 1) << PAGE_CACHE_SHIFT;
+ map_end = ((loff_t)page_index + 1) << PAGE_CACHE_SHIFT;
if (map_end > end)
map_end = end;
u32 dlm_key;
struct dlm_ctxt *dlm;
struct o2dlm_private *priv;
- struct dlm_protocol_version dlm_version;
+ struct dlm_protocol_version fs_version;
BUG_ON(conn == NULL);
BUG_ON(o2cb_stack.sp_proto == NULL);
/* used by the dlm code to make message headers unique, each
* node in this domain must agree on this. */
dlm_key = crc32_le(0, conn->cc_name, conn->cc_namelen);
- dlm_version.pv_major = conn->cc_version.pv_major;
- dlm_version.pv_minor = conn->cc_version.pv_minor;
+ fs_version.pv_major = conn->cc_version.pv_major;
+ fs_version.pv_minor = conn->cc_version.pv_minor;
- dlm = dlm_register_domain(conn->cc_name, dlm_key, &dlm_version);
+ dlm = dlm_register_domain(conn->cc_name, dlm_key, &fs_version);
if (IS_ERR(dlm)) {
rc = PTR_ERR(dlm);
mlog_errno(rc);
goto out_free;
}
- conn->cc_version.pv_major = dlm_version.pv_major;
- conn->cc_version.pv_minor = dlm_version.pv_minor;
+ conn->cc_version.pv_major = fs_version.pv_major;
+ conn->cc_version.pv_minor = fs_version.pv_minor;
conn->cc_lockspace = dlm;
dlm_register_eviction_cb(dlm, &priv->op_eviction_cb);
"file system, but write access is "
"unavailable.\n");
else
- mlog_errno(status);
+ mlog_errno(status);
goto read_super_error;
}
}
memcpy(link, target, len);
- nd_set_link(nd, link);
bail:
+ nd_set_link(nd, status ? ERR_PTR(status) : link);
brelse(bh);
mlog_exit(status);
- return status ? ERR_PTR(status) : link;
+ return NULL;
}
static void ocfs2_fast_put_link(struct dentry *dentry, struct nameidata *nd, void *cookie)
{
- char *link = cookie;
-
- kfree(link);
+ char *link = nd_get_link(nd);
+ if (!IS_ERR(link))
+ kfree(link);
}
const struct inode_operations ocfs2_symlink_inode_operations = {
}
/* Warning: even if it returns true, this does *not* guarantee that
- * the block is stored in our inode metadata cache.
- *
+ * the block is stored in our inode metadata cache.
+ *
* This can be called under lock_buffer()
*/
int ocfs2_buffer_uptodate(struct ocfs2_caching_info *ci,
{
struct pid_namespace *ns = dentry->d_sb->s_fs_info;
pid_t tgid = task_tgid_nr_ns(current, ns);
- char tmp[PROC_NUMBUF];
- if (!tgid)
- return ERR_PTR(-ENOENT);
- sprintf(tmp, "%d", task_tgid_nr_ns(current, ns));
- return ERR_PTR(vfs_follow_link(nd,tmp));
+ char *name = ERR_PTR(-ENOENT);
+ if (tgid) {
+ name = __getname();
+ if (!name)
+ name = ERR_PTR(-ENOMEM);
+ else
+ sprintf(name, "%d", tgid);
+ }
+ nd_set_link(nd, name);
+ return NULL;
+}
+
+static void proc_self_put_link(struct dentry *dentry, struct nameidata *nd,
+ void *cookie)
+{
+ char *s = nd_get_link(nd);
+ if (!IS_ERR(s))
+ __putname(s);
}
static const struct inode_operations proc_self_inode_operations = {
.readlink = proc_self_readlink,
.follow_link = proc_self_follow_link,
+ .put_link = proc_self_put_link,
};
/*
args.objectid = key->on_disk_key.k_objectid;
args.dirid = key->on_disk_key.k_dir_id;
+ reiserfs_write_unlock(s);
inode = iget5_locked(s, key->on_disk_key.k_objectid,
reiserfs_find_actor, reiserfs_init_locked_inode,
(void *)(&args));
+ reiserfs_write_lock(s);
if (!inode)
return ERR_PTR(-ENOMEM);
journal->j_mount_id = 10;
journal->j_state = 0;
atomic_set(&(journal->j_jlock), 0);
+ reiserfs_write_unlock(sb);
journal->j_cnode_free_list = allocate_cnodes(num_cnodes);
+ reiserfs_write_lock(sb);
journal->j_cnode_free_orig = journal->j_cnode_free_list;
journal->j_cnode_free = journal->j_cnode_free_list ? num_cnodes : 0;
journal->j_cnode_used = 0;
if (!sd_attrs)
return -ENOMEM;
sd->s_iattr = sd_attrs;
- } else {
- /* attributes were changed at least once in past */
- iattrs = &sd_attrs->ia_iattr;
-
- if (ia_valid & ATTR_UID)
- iattrs->ia_uid = iattr->ia_uid;
- if (ia_valid & ATTR_GID)
- iattrs->ia_gid = iattr->ia_gid;
- if (ia_valid & ATTR_ATIME)
- iattrs->ia_atime = iattr->ia_atime;
- if (ia_valid & ATTR_MTIME)
- iattrs->ia_mtime = iattr->ia_mtime;
- if (ia_valid & ATTR_CTIME)
- iattrs->ia_ctime = iattr->ia_ctime;
- if (ia_valid & ATTR_MODE) {
- umode_t mode = iattr->ia_mode;
- iattrs->ia_mode = sd->s_mode = mode;
- }
+ }
+ /* attributes were changed at least once in past */
+ iattrs = &sd_attrs->ia_iattr;
+
+ if (ia_valid & ATTR_UID)
+ iattrs->ia_uid = iattr->ia_uid;
+ if (ia_valid & ATTR_GID)
+ iattrs->ia_gid = iattr->ia_gid;
+ if (ia_valid & ATTR_ATIME)
+ iattrs->ia_atime = iattr->ia_atime;
+ if (ia_valid & ATTR_MTIME)
+ iattrs->ia_mtime = iattr->ia_mtime;
+ if (ia_valid & ATTR_CTIME)
+ iattrs->ia_ctime = iattr->ia_ctime;
+ if (ia_valid & ATTR_MODE) {
+ umode_t mode = iattr->ia_mode;
+ iattrs->ia_mode = sd->s_mode = mode;
}
return 0;
}
__u16 hdisplay, hsync_start, hsync_end, htotal, hskew;
__u16 vdisplay, vsync_start, vsync_end, vtotal, vscan;
- __u32 vrefresh; /* vertical refresh * 1000 */
+ __u32 vrefresh;
__u32 flags;
__u32 type;
#define NOUVEAU_GETPARAM_PCI_PHYSICAL 10
#define NOUVEAU_GETPARAM_CHIPSET_ID 11
#define NOUVEAU_GETPARAM_VM_VRAM_BASE 12
+#define NOUVEAU_GETPARAM_GRAPH_UNITS 13
struct drm_nouveau_getparam {
uint64_t param;
uint64_t value;
#define DRM_VMW_PARAM_NUM_FREE_STREAMS 1
#define DRM_VMW_PARAM_3D 2
#define DRM_VMW_PARAM_FIFO_OFFSET 3
-
+#define DRM_VMW_PARAM_HW_CAPS 4
+#define DRM_VMW_PARAM_FIFO_CAPS 5
/**
* struct drm_vmw_getparam_arg
* The size of the array should equal the total number of mipmap levels.
* @shareable: Boolean whether other clients (as identified by file descriptors)
* may reference this surface.
+ * @scanout: Boolean whether the surface is intended to be used as a
+ * scanout.
*
* Input data to the DRM_VMW_CREATE_SURFACE Ioctl.
* Output data from the DRM_VMW_REF_SURFACE Ioctl.
uint32_t mip_levels[DRM_VMW_MAX_SURFACE_FACES];
uint64_t size_addr;
int32_t shareable;
- uint32_t pad64;
+ int32_t scanout;
};
/**
*
* @commands: User-space address of a command buffer cast to an uint64_t.
* @command-size: Size in bytes of the command buffer.
+ * @throttle-us: Sleep until software is less than @throttle_us
+ * microseconds ahead of hardware. The driver may round this value
+ * to the nearest kernel tick.
* @fence_rep: User-space address of a struct drm_vmw_fence_rep cast to an
* uint64_t.
+ * @version: Allows expanding the execbuf ioctl parameters without breaking
+ * backwards compatibility, since user-space will always tell the kernel
+ * which version it uses.
+ * @flags: Execbuf flags. None currently.
*
* Argument to the DRM_VMW_EXECBUF Ioctl.
*/
+#define DRM_VMW_EXECBUF_VERSION 0
+
struct drm_vmw_execbuf_arg {
uint64_t commands;
uint32_t command_size;
- uint32_t pad64;
+ uint32_t throttle_us;
uint64_t fence_rep;
+ uint32_t version;
+ uint32_t flags;
};
/**
/*
- * linux/include/asm-arm/hardware/amba.h
+ * linux/include/amba/bus.h
+ *
+ * This device type deals with ARM PrimeCells and anything else that
+ * presents a proper CID (0xB105F00D) at the end of the I/O register
+ * region or that is derived from a PrimeCell.
*
* Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved.
*
return id[ATA_ID_SECTOR_SIZE] & (1 << 13);
}
-static inline u8 ata_id_logical_per_physical_sectors(const u16 *id)
+static inline u16 ata_id_logical_per_physical_sectors(const u16 *id)
{
- return id[ATA_ID_SECTOR_SIZE] & 0xf;
+ return 1 << (id[ATA_ID_SECTOR_SIZE] & 0xf);
}
static inline int ata_id_has_lba48(const u16 *id)
#define QUEUE_FLAG_NONROT 14 /* non-rotational device (SSD) */
#define QUEUE_FLAG_VIRT QUEUE_FLAG_NONROT /* paravirt device */
#define QUEUE_FLAG_IO_STAT 15 /* do IO stats */
-#define QUEUE_FLAG_CQ 16 /* hardware does queuing */
-#define QUEUE_FLAG_DISCARD 17 /* supports DISCARD */
+#define QUEUE_FLAG_DISCARD 16 /* supports DISCARD */
#define QUEUE_FLAG_DEFAULT ((1 << QUEUE_FLAG_IO_STAT) | \
(1 << QUEUE_FLAG_CLUSTER) | \
#define blk_queue_plugged(q) test_bit(QUEUE_FLAG_PLUGGED, &(q)->queue_flags)
#define blk_queue_tagged(q) test_bit(QUEUE_FLAG_QUEUED, &(q)->queue_flags)
-#define blk_queue_queuing(q) test_bit(QUEUE_FLAG_CQ, &(q)->queue_flags)
#define blk_queue_stopped(q) test_bit(QUEUE_FLAG_STOPPED, &(q)->queue_flags)
#define blk_queue_nomerges(q) test_bit(QUEUE_FLAG_NOMERGES, &(q)->queue_flags)
#define blk_queue_nonrot(q) test_bit(QUEUE_FLAG_NONROT, &(q)->queue_flags)
# define __acquire(x) __context__(x,1)
# define __release(x) __context__(x,-1)
# define __cond_lock(x,c) ((c) ? ({ __acquire(x); 1; }) : 0)
+# define __percpu __attribute__((noderef, address_space(3)))
extern void __chk_user_ptr(const volatile void __user *);
extern void __chk_io_ptr(const volatile void __iomem *);
#else
# define __acquire(x) (void)0
# define __release(x) (void)0
# define __cond_lock(x,c) (c)
+# define __percpu
#endif
#ifdef __KERNEL__
#include <linux/types.h>
-#define CN_IDX_CONNECTOR 0xffffffff
-#define CN_VAL_CONNECTOR 0xffffffff
-
/*
* Process Events connector unique ids -- used for message routing
*/
__u8 data[0];
};
-/*
- * Notify structure - requests notification about
- * registering/unregistering idx/val in range [first, first+range].
- */
-struct cn_notify_req {
- __u32 first;
- __u32 range;
-};
-
-/*
- * Main notification control message
- * *_notify_num - number of appropriate cn_notify_req structures after
- * this struct.
- * group - notification receiver's idx.
- * len - total length of the attached data.
- */
-struct cn_ctl_msg {
- __u32 idx_notify_num;
- __u32 val_notify_num;
- __u32 group;
- __u32 len;
- __u8 data[0];
-};
-
#ifdef __KERNEL__
#include <asm/atomic.h>
u32 seq, group;
};
-struct cn_ctl_entry {
- struct list_head notify_entry;
- struct cn_ctl_msg *msg;
-};
-
struct cn_dev {
struct cb_id id;
uid_t i_uid;
gid_t i_gid;
dev_t i_rdev;
+ unsigned int i_blkbits;
u64 i_version;
loff_t i_size;
#ifdef __NEED_I_SIZE_ORDERED
struct timespec i_mtime;
struct timespec i_ctime;
blkcnt_t i_blocks;
- unsigned int i_blkbits;
unsigned short i_bytes;
umode_t i_mode;
spinlock_t i_lock; /* i_blocks, i_bytes, maybe i_size */
void (*hiddev_report_event) (struct hid_device *, struct hid_report *);
/* handler for raw output data, used by hidraw */
- int (*hid_output_raw_report) (struct hid_device *, __u8 *, size_t);
+ int (*hid_output_raw_report) (struct hid_device *, __u8 *, size_t, unsigned char);
/* debugging support via debugfs */
unsigned short debug;
/* Applications from HID Usage Tables 4/8/99 Version 1.1 */
/* We ignore a few input applications that are not widely used */
-#define IS_INPUT_APPLICATION(a) (((a >= 0x00010000) && (a <= 0x00010008)) || (a == 0x00010080) || (a == 0x000c0001) || (a == 0x000d0002))
+#define IS_INPUT_APPLICATION(a) (((a >= 0x00010000) && (a <= 0x00010008)) || (a == 0x00010080) || (a == 0x000c0001) || ((a >= 0x000d0002) && (a <= 0x000d0006)))
/* HID core API */
int hidinput_find_field(struct hid_device *hid, unsigned int type, unsigned int code, struct hid_field **field);
void hid_output_report(struct hid_report *report, __u8 *data);
struct hid_device *hid_allocate_device(void);
+struct hid_report *hid_register_report(struct hid_device *device, unsigned type, unsigned id);
int hid_parse_report(struct hid_device *hid, __u8 *start, unsigned size);
int hid_check_keys_pressed(struct hid_device *hid);
int hid_connect(struct hid_device *hid, unsigned int connect_mask);
return bp->attr.bp_type;
}
-static inline int hw_breakpoint_len(struct perf_event *bp)
+static inline unsigned long hw_breakpoint_len(struct perf_event *bp)
{
return bp->attr.bp_len;
}
extern void unregister_hw_breakpoint(struct perf_event *bp);
extern void unregister_wide_hw_breakpoint(struct perf_event **cpu_events);
+extern int dbg_reserve_bp_slot(struct perf_event *bp);
+extern int dbg_release_bp_slot(struct perf_event *bp);
extern int reserve_bp_slot(struct perf_event *bp);
extern void release_bp_slot(struct perf_event *bp);
extern int ima_bprm_check(struct linux_binprm *bprm);
extern int ima_inode_alloc(struct inode *inode);
extern void ima_inode_free(struct inode *inode);
-extern int ima_path_check(struct path *path, int mask);
+extern int ima_file_check(struct file *file, int mask);
extern void ima_file_free(struct file *file);
extern int ima_file_mmap(struct file *file, unsigned long prot);
extern void ima_counts_get(struct file *file);
return;
}
-static inline int ima_path_check(struct path *path, int mask)
+static inline int ima_file_check(struct file *file, int mask)
{
return 0;
}
#define KEY_DISPLAY_OFF 245 /* display device to off state */
#define KEY_WIMAX 246
+#define KEY_RFKILL 247 /* Key that controls all radios */
/* Range 248 - 255 is reserved for special needs of AT keyboard driver */
#define KEY_CAMERA_FOCUS 0x210
+#define BTN_TRIGGER_HAPPY 0x2c0
+#define BTN_TRIGGER_HAPPY1 0x2c0
+#define BTN_TRIGGER_HAPPY2 0x2c1
+#define BTN_TRIGGER_HAPPY3 0x2c2
+#define BTN_TRIGGER_HAPPY4 0x2c3
+#define BTN_TRIGGER_HAPPY5 0x2c4
+#define BTN_TRIGGER_HAPPY6 0x2c5
+#define BTN_TRIGGER_HAPPY7 0x2c6
+#define BTN_TRIGGER_HAPPY8 0x2c7
+#define BTN_TRIGGER_HAPPY9 0x2c8
+#define BTN_TRIGGER_HAPPY10 0x2c9
+#define BTN_TRIGGER_HAPPY11 0x2ca
+#define BTN_TRIGGER_HAPPY12 0x2cb
+#define BTN_TRIGGER_HAPPY13 0x2cc
+#define BTN_TRIGGER_HAPPY14 0x2cd
+#define BTN_TRIGGER_HAPPY15 0x2ce
+#define BTN_TRIGGER_HAPPY16 0x2cf
+#define BTN_TRIGGER_HAPPY17 0x2d0
+#define BTN_TRIGGER_HAPPY18 0x2d1
+#define BTN_TRIGGER_HAPPY19 0x2d2
+#define BTN_TRIGGER_HAPPY20 0x2d3
+#define BTN_TRIGGER_HAPPY21 0x2d4
+#define BTN_TRIGGER_HAPPY22 0x2d5
+#define BTN_TRIGGER_HAPPY23 0x2d6
+#define BTN_TRIGGER_HAPPY24 0x2d7
+#define BTN_TRIGGER_HAPPY25 0x2d8
+#define BTN_TRIGGER_HAPPY26 0x2d9
+#define BTN_TRIGGER_HAPPY27 0x2da
+#define BTN_TRIGGER_HAPPY28 0x2db
+#define BTN_TRIGGER_HAPPY29 0x2dc
+#define BTN_TRIGGER_HAPPY30 0x2dd
+#define BTN_TRIGGER_HAPPY31 0x2de
+#define BTN_TRIGGER_HAPPY32 0x2df
+#define BTN_TRIGGER_HAPPY33 0x2e0
+#define BTN_TRIGGER_HAPPY34 0x2e1
+#define BTN_TRIGGER_HAPPY35 0x2e2
+#define BTN_TRIGGER_HAPPY36 0x2e3
+#define BTN_TRIGGER_HAPPY37 0x2e4
+#define BTN_TRIGGER_HAPPY38 0x2e5
+#define BTN_TRIGGER_HAPPY39 0x2e6
+#define BTN_TRIGGER_HAPPY40 0x2e7
+
/* We avoid low common keys in module aliases so they don't get huge. */
#define KEY_MIN_INTERESTING KEY_MUTE
#define KEY_MAX 0x2ff
*/
static inline bool kfifo_initialized(struct kfifo *fifo)
{
- return fifo->buffer != 0;
+ return fifo->buffer != NULL;
}
/**
int pci_prepare_to_sleep(struct pci_dev *dev);
int pci_back_from_sleep(struct pci_dev *dev);
+/* For use by arch with custom probe code */
+void set_pcie_port_type(struct pci_dev *pdev);
+void set_pcie_hotplug_bridge(struct pci_dev *pdev);
+
/* Functions for PCI Hotplug drivers to use */
int pci_bus_find_capability(struct pci_bus *bus, unsigned int devfn, int cap);
#ifdef CONFIG_HOTPLUG
__u32 wakeup_watermark; /* bytes before wakeup */
};
- __u32 __reserved_2;
-
- __u64 bp_addr;
__u32 bp_type;
- __u32 bp_len;
+ __u64 bp_addr;
+ __u64 bp_len;
};
/*
#ifdef CONFIG_DETECT_SOFTLOCKUP
extern void softlockup_tick(void);
extern void touch_softlockup_watchdog(void);
+extern void touch_softlockup_watchdog_sync(void);
extern void touch_all_softlockup_watchdogs(void);
extern int proc_dosoftlockup_thresh(struct ctl_table *table, int write,
void __user *buffer,
static inline void touch_softlockup_watchdog(void)
{
}
+static inline void touch_softlockup_watchdog_sync(void)
+{
+}
static inline void touch_all_softlockup_watchdogs(void)
{
}
* This re-enables callbacks; it returns "false" if there are pending
* buffers in the queue, to detect a possible race between the driver
* checking for more work, and enabling callbacks.
+ * @detach_unused_buf: detach first unused buffer
+ * vq: the struct virtqueue we're talking about.
+ * Returns NULL or the "data" token handed to add_buf
*
* Locking rules are straightforward: the driver is responsible for
* locking. No two operations may be invoked simultaneously, with the exception
void (*disable_cb)(struct virtqueue *vq);
bool (*enable_cb)(struct virtqueue *vq);
+ void *(*detach_unused_buf)(struct virtqueue *vq);
};
/**
/* The feature bitmap for virtio balloon */
#define VIRTIO_BALLOON_F_MUST_TELL_HOST 0 /* Tell before reclaiming pages */
+#define VIRTIO_BALLOON_F_STATS_VQ 1 /* Memory Stats virtqueue */
/* Size of a PFN in the balloon interface. */
#define VIRTIO_BALLOON_PFN_SHIFT 12
/* Number of pages we've actually got in balloon. */
__le32 actual;
};
+
+#define VIRTIO_BALLOON_S_SWAP_IN 0 /* Amount of memory swapped in */
+#define VIRTIO_BALLOON_S_SWAP_OUT 1 /* Amount of memory swapped out */
+#define VIRTIO_BALLOON_S_MAJFLT 2 /* Number of major faults */
+#define VIRTIO_BALLOON_S_MINFLT 3 /* Number of minor faults */
+#define VIRTIO_BALLOON_S_MEMFREE 4 /* Total amount of free memory */
+#define VIRTIO_BALLOON_S_MEMTOT 5 /* Total amount of memory */
+#define VIRTIO_BALLOON_S_NR 6
+
+struct virtio_balloon_stat {
+ u16 tag;
+ u64 val;
+} __attribute__((packed));
+
#endif /* _LINUX_VIRTIO_BALLOON_H */
#define VIRTIO_BLK_F_BLK_SIZE 6 /* Block size of disk is available*/
#define VIRTIO_BLK_F_SCSI 7 /* Supports scsi command passthru */
#define VIRTIO_BLK_F_FLUSH 9 /* Cache flush command support */
+#define VIRTIO_BLK_F_TOPOLOGY 10 /* Topology information is available */
struct virtio_blk_config {
/* The capacity (in 512-byte sectors). */
__u8 heads;
__u8 sectors;
} geometry;
+
/* block size of device (if VIRTIO_BLK_F_BLK_SIZE) */
__u32 blk_size;
+
+ /* the next 4 entries are guarded by VIRTIO_BLK_F_TOPOLOGY */
+ /* exponent for physical block per logical block. */
+ __u8 physical_block_exp;
+ /* alignment offset in logical blocks. */
+ __u8 alignment_offset;
+ /* minimum I/O size without performance penalty in logical blocks. */
+ __u16 min_io_size;
+ /* optimal sustained I/O size in logical blocks. */
+ __u32 opt_io_size;
+
} __attribute__((packed));
/*
#include <linux/types.h>
#include <linux/virtio_ids.h>
#include <linux/virtio_config.h>
-/* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
- * anyone can use the definitions to implement compatible drivers/servers. */
+/*
+ * This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
+ * anyone can use the definitions to implement compatible drivers/servers.
+ *
+ * Copyright (C) Red Hat, Inc., 2009, 2010
+ */
/* Feature bits */
#define VIRTIO_CONSOLE_F_SIZE 0 /* Does host provide console size? */
+#define VIRTIO_CONSOLE_F_MULTIPORT 1 /* Does host provide multiple ports? */
struct virtio_console_config {
/* colums of the screens */
__u16 cols;
/* rows of the screens */
__u16 rows;
+ /* max. number of ports this device can hold */
+ __u32 max_nr_ports;
+ /* number of ports added so far */
+ __u32 nr_ports;
} __attribute__((packed));
+/*
+ * A message that's passed between the Host and the Guest for a
+ * particular port.
+ */
+struct virtio_console_control {
+ __u32 id; /* Port number */
+ __u16 event; /* The kind of control event (see below) */
+ __u16 value; /* Extra information for the key */
+};
+
+/* Some events for control messages */
+#define VIRTIO_CONSOLE_PORT_READY 0
+#define VIRTIO_CONSOLE_CONSOLE_PORT 1
+#define VIRTIO_CONSOLE_RESIZE 2
+#define VIRTIO_CONSOLE_PORT_OPEN 3
+#define VIRTIO_CONSOLE_PORT_NAME 4
+#define VIRTIO_CONSOLE_PORT_REMOVE 5
#ifdef __KERNEL__
int __init virtio_cons_early_init(int (*put_chars)(u32, const char *, int));
struct netns_ct {
atomic_t count;
unsigned int expect_count;
+ unsigned int htable_size;
+ struct kmem_cache *nf_conntrack_cachep;
struct hlist_nulls_head *hash;
struct hlist_head *expect_hash;
struct hlist_nulls_head unconfirmed;
#endif
int hash_vmalloc;
int expect_vmalloc;
+ char *slabname;
};
#endif
struct xt_table *iptable_security;
struct xt_table *nat_table;
struct hlist_head *nat_bysource;
+ unsigned int nat_htable_size;
int nat_vmalloced;
#endif
proc_caches_init();
buffer_init();
key_init();
+ radix_tree_init();
security_init();
vfs_caches_init(totalram_pages);
- radix_tree_init();
signals_init();
/* rootfs populating might need page-writeback */
page_writeback_init();
for_each_subsys(root, ss) {
struct cgroup_subsys_state *css = ss->create(ss, cgrp);
+
if (IS_ERR(css)) {
err = PTR_ERR(css);
goto err_destroy;
}
init_cgroup_css(css, ss, cgrp);
- if (ss->use_id)
- if (alloc_css_id(ss, parent, cgrp))
+ if (ss->use_id) {
+ err = alloc_css_id(ss, parent, cgrp);
+ if (err)
goto err_destroy;
+ }
/* At error, ->destroy() callback has to free assigned ID. */
}
write_lock_irq(&tasklist_lock);
for_each_process(p) {
- if (task_cpu(p) == cpu &&
+ if (task_cpu(p) == cpu && p->state == TASK_RUNNING &&
(!cputime_eq(p->utime, cputime_zero) ||
!cputime_eq(p->stime, cputime_zero)))
- printk(KERN_WARNING "Task %s (pid = %d) is on cpu %d\
- (state = %ld, flags = %x) \n",
- p->comm, task_pid_nr(p), cpu,
- p->state, p->flags);
+ printk(KERN_WARNING "Task %s (pid = %d) is on cpu %d "
+ "(state = %ld, flags = %x)\n",
+ p->comm, task_pid_nr(p), cpu,
+ p->state, p->flags);
}
write_unlock_irq(&tasklist_lock);
}
#ifdef CONFIG_KEYS
new->tgcred = kzalloc(sizeof(*new->tgcred), GFP_KERNEL);
if (!new->tgcred) {
- kfree(new);
+ kmem_cache_free(cred_jar, new);
return NULL;
}
atomic_set(&new->tgcred->usage, 1);
/* Need tasklist lock for parent etc handling! */
write_lock_irq(&tasklist_lock);
- /*
- * The task hasn't been attached yet, so its cpus_allowed mask will
- * not be changed, nor will its assigned CPU.
- *
- * The cpus_allowed mask of the parent may have changed after it was
- * copied first time - so re-copy it here, then check the child's CPU
- * to ensure it is on a valid CPU (and if not, just force it back to
- * parent's CPU). This avoids alot of nasty races.
- */
- p->cpus_allowed = current->cpus_allowed;
- p->rt.nr_cpus_allowed = current->rt.nr_cpus_allowed;
- if (unlikely(!cpu_isset(task_cpu(p), p->cpus_allowed) ||
- !cpu_online(task_cpu(p))))
- set_task_cpu(p, smp_processor_id());
-
/* CLONE_PARENT re-uses the old parent */
if (clone_flags & (CLONE_PARENT|CLONE_THREAD)) {
p->real_parent = current->real_parent;
return -EINVAL;
WARN_ON(!atomic_read(&pi_state->refcount));
- WARN_ON(pid && pi_state->owner &&
- pi_state->owner->pid != pid);
+
+ /*
+ * When pi_state->owner is NULL then the owner died
+ * and another waiter is on the fly. pi_state->owner
+ * is fixed up by the task which acquires
+ * pi_state->rt_mutex.
+ *
+ * We do not check for pid == 0 which can happen when
+ * the owner died and robust_list_exit() cleared the
+ * TID.
+ */
+ if (pid && pi_state->owner) {
+ /*
+ * Bail out if user space manipulated the
+ * futex value.
+ */
+ if (pid != task_pid_vnr(pi_state->owner))
+ return -EINVAL;
+ }
atomic_inc(&pi_state->refcount);
*ps = pi_state;
if (!pi_state)
return -EINVAL;
+ /*
+ * If current does not own the pi_state then the futex is
+ * inconsistent and user space fiddled with the futex value.
+ */
+ if (pi_state->owner != current)
+ return -EINVAL;
+
raw_spin_lock(&pi_state->pi_mutex.wait_lock);
new_owner = rt_mutex_next_owner(&pi_state->pi_mutex);
/* Unqueue and drop the lock */
unqueue_me_pi(&q);
- goto out;
+ goto out_put_key;
out_unlock_put_key:
queue_unlock(&q, hb);
* ((per_cpu(nr_bp_flexible, *) > 1) + max(per_cpu(nr_cpu_bp_pinned, *))
* + max(per_cpu(nr_task_bp_pinned, *))) < HBP_NUM
*/
-int reserve_bp_slot(struct perf_event *bp)
+static int __reserve_bp_slot(struct perf_event *bp)
{
struct bp_busy_slots slots = {0};
- int ret = 0;
-
- mutex_lock(&nr_bp_mutex);
fetch_bp_busy_slots(&slots, bp);
/* Flexible counters need to keep at least one slot */
- if (slots.pinned + (!!slots.flexible) == HBP_NUM) {
- ret = -ENOSPC;
- goto end;
- }
+ if (slots.pinned + (!!slots.flexible) == HBP_NUM)
+ return -ENOSPC;
toggle_bp_slot(bp, true);
-end:
+ return 0;
+}
+
+int reserve_bp_slot(struct perf_event *bp)
+{
+ int ret;
+
+ mutex_lock(&nr_bp_mutex);
+
+ ret = __reserve_bp_slot(bp);
+
mutex_unlock(&nr_bp_mutex);
return ret;
}
+static void __release_bp_slot(struct perf_event *bp)
+{
+ toggle_bp_slot(bp, false);
+}
+
void release_bp_slot(struct perf_event *bp)
{
mutex_lock(&nr_bp_mutex);
- toggle_bp_slot(bp, false);
+ __release_bp_slot(bp);
mutex_unlock(&nr_bp_mutex);
}
+/*
+ * Allow the kernel debugger to reserve breakpoint slots without
+ * taking a lock using the dbg_* variant of for the reserve and
+ * release breakpoint slots.
+ */
+int dbg_reserve_bp_slot(struct perf_event *bp)
+{
+ if (mutex_is_locked(&nr_bp_mutex))
+ return -1;
+
+ return __reserve_bp_slot(bp);
+}
+
+int dbg_release_bp_slot(struct perf_event *bp)
+{
+ if (mutex_is_locked(&nr_bp_mutex))
+ return -1;
+
+ __release_bp_slot(bp);
+
+ return 0;
+}
int register_perf_hw_breakpoint(struct perf_event *bp)
{
if (!bp->attr.disabled || !bp->overflow_handler)
ret = arch_validate_hwbkpt_settings(bp, bp->ctx->task);
+ /* if arch_validate_hwbkpt_settings() fails then release bp slot */
+ if (ret)
+ release_bp_slot(bp);
+
return ret;
}
int modify_user_hw_breakpoint(struct perf_event *bp, struct perf_event_attr *attr)
{
u64 old_addr = bp->attr.bp_addr;
+ u64 old_len = bp->attr.bp_len;
int old_type = bp->attr.bp_type;
- int old_len = bp->attr.bp_len;
int err = 0;
perf_event_disable(bp);
buffer = kmalloc(size, gfp_mask);
if (!buffer) {
- _kfifo_init(fifo, 0, 0);
+ _kfifo_init(fifo, NULL, 0);
return -ENOMEM;
}
void kfifo_free(struct kfifo *fifo)
{
kfree(fifo->buffer);
+ _kfifo_init(fifo, NULL, 0);
}
EXPORT_SYMBOL(kfifo_free);
* @fifo: the fifo to be used.
* @from: pointer to the data to be added.
* @len: the length of the data to be added.
+ * @total: the actual returned data length.
*
* This function copies at most @len bytes from the @from into the
* FIFO depending and returns -EFAULT/0.
* @fifo: the fifo to be used.
* @to: where the data must be copied.
* @len: the size of the destination buffer.
- @ @lenout: pointer to output variable with copied data
+ * @lenout: pointer to output variable with copied data
*
* This function copies at most @len bytes from the FIFO into the
* @to buffer and 0 or -EFAULT.
smp_wmb();
atomic_set(&cpu_in_kgdb[cpu], 1);
+ /* Disable any cpu specific hw breakpoints */
+ kgdb_disable_hw_debug(regs);
+
/* Wait till primary CPU is done with debugging */
while (atomic_read(&passive_cpu_wait[cpu]))
cpu_relax();
/* Signal the primary CPU that we are done: */
atomic_set(&cpu_in_kgdb[cpu], 0);
- touch_softlockup_watchdog();
+ touch_softlockup_watchdog_sync();
clocksource_touch_watchdog();
local_irq_restore(flags);
}
(kgdb_info[cpu].task &&
kgdb_info[cpu].task->pid != kgdb_sstep_pid) && --sstep_tries) {
atomic_set(&kgdb_active, -1);
- touch_softlockup_watchdog();
+ touch_softlockup_watchdog_sync();
clocksource_touch_watchdog();
local_irq_restore(flags);
}
/* Free kgdb_active */
atomic_set(&kgdb_active, -1);
- touch_softlockup_watchdog();
+ touch_softlockup_watchdog_sync();
clocksource_touch_watchdog();
local_irq_restore(flags);
return ret;
return print_irq_inversion_bug(curr, &root, target_entry,
- this, 1, irqclass);
+ this, 0, irqclass);
}
void print_irqtrace_events(struct task_struct *curr)
task_event->event_id.tid = perf_event_tid(event, task);
task_event->event_id.ptid = perf_event_tid(event, current);
- task_event->event_id.time = perf_clock();
-
perf_output_put(&handle, task_event->event_id);
perf_output_end(&handle);
static int perf_event_task_match(struct perf_event *event)
{
- if (event->state != PERF_EVENT_STATE_ACTIVE)
+ if (event->state < PERF_EVENT_STATE_INACTIVE)
return 0;
if (event->cpu != -1 && event->cpu != smp_processor_id())
cpuctx = &get_cpu_var(perf_cpu_context);
perf_event_task_ctx(&cpuctx->ctx, task_event);
if (!ctx)
- ctx = rcu_dereference(task_event->task->perf_event_ctxp);
+ ctx = rcu_dereference(current->perf_event_ctxp);
if (ctx)
perf_event_task_ctx(ctx, task_event);
put_cpu_var(perf_cpu_context);
/* .ppid */
/* .tid */
/* .ptid */
+ .time = perf_clock(),
},
};
static int perf_event_comm_match(struct perf_event *event)
{
- if (event->state != PERF_EVENT_STATE_ACTIVE)
+ if (event->state < PERF_EVENT_STATE_INACTIVE)
return 0;
if (event->cpu != -1 && event->cpu != smp_processor_id())
static int perf_event_mmap_match(struct perf_event *event,
struct perf_mmap_event *mmap_event)
{
- if (event->state != PERF_EVENT_STATE_ACTIVE)
+ if (event->state < PERF_EVENT_STATE_INACTIVE)
return 0;
if (event->cpu != -1 && event->cpu != smp_processor_id())
if (attr->type >= PERF_TYPE_MAX)
return -EINVAL;
- if (attr->__reserved_1 || attr->__reserved_2)
+ if (attr->__reserved_1)
return -EINVAL;
if (attr->sample_type & ~(PERF_SAMPLE_MAX-1))
}
/*
- * Called from:
+ * Gets called from 3 sites (exec, fork, wakeup), since it is called without
+ * holding rq->lock we need to ensure ->cpus_allowed is stable, this is done
+ * by:
*
- * - fork, @p is stable because it isn't on the tasklist yet
- *
- * - exec, @p is unstable, retry loop
- *
- * - wake-up, we serialize ->cpus_allowed against TASK_WAKING so
- * we should be good.
+ * exec: is unstable, retry loop
+ * fork & wake-up: serialize ->cpus_allowed against TASK_WAKING
*/
static inline
int select_task_rq(struct task_struct *p, int sd_flags, int wake_flags)
if (p->sched_class->task_fork)
p->sched_class->task_fork(p);
-#ifdef CONFIG_SMP
- cpu = select_task_rq(p, SD_BALANCE_FORK, 0);
-#endif
set_task_cpu(p, cpu);
#if defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT)
{
unsigned long flags;
struct rq *rq;
+ int cpu = get_cpu();
+
+#ifdef CONFIG_SMP
+ /*
+ * Fork balancing, do it here and not earlier because:
+ * - cpus_allowed can change in the fork path
+ * - any previously selected cpu might disappear through hotplug
+ *
+ * We still have TASK_WAKING but PF_STARTING is gone now, meaning
+ * ->cpus_allowed is stable, we have preemption disabled, meaning
+ * cpu_online_mask is stable.
+ */
+ cpu = select_task_rq(p, SD_BALANCE_FORK, 0);
+ set_task_cpu(p, cpu);
+#endif
rq = task_rq_lock(p, &flags);
BUG_ON(p->state != TASK_WAKING);
p->sched_class->task_woken(rq, p);
#endif
task_rq_unlock(rq, &flags);
+ put_cpu();
}
#ifdef CONFIG_PREEMPT_NOTIFIERS
* the ->cpus_allowed mask from under waking tasks, which would be
* possible when we change rq->lock in ttwu(), so synchronize against
* TASK_WAKING to avoid that.
+ *
+ * Make an exception for freshly cloned tasks, since cpuset namespaces
+ * might move the task about, we have to validate the target in
+ * wake_up_new_task() anyway since the cpu might have gone away.
*/
again:
- while (p->state == TASK_WAKING)
+ while (p->state == TASK_WAKING && !(p->flags & PF_STARTING))
cpu_relax();
rq = task_rq_lock(p, &flags);
- if (p->state == TASK_WAKING) {
+ if (p->state == TASK_WAKING && !(p->flags & PF_STARTING)) {
task_rq_unlock(rq, &flags);
goto again;
}
*/
/*
- * The trampoline is called when the hrtimer expires. If this is
- * called from the hrtimer interrupt then we schedule the tasklet as
- * the timer callback function expects to run in softirq context. If
- * it's called in softirq context anyway (i.e. high resolution timers
- * disabled) then the hrtimer callback is called right away.
+ * The trampoline is called when the hrtimer expires. It schedules a tasklet
+ * to run __tasklet_hrtimer_trampoline() which in turn will call the intended
+ * hrtimer callback, but from softirq context.
*/
static enum hrtimer_restart __hrtimer_tasklet_trampoline(struct hrtimer *timer)
{
struct tasklet_hrtimer *ttimer =
container_of(timer, struct tasklet_hrtimer, timer);
- if (hrtimer_is_hres_active(timer)) {
- tasklet_hi_schedule(&ttimer->tasklet);
- return HRTIMER_NORESTART;
- }
- return ttimer->function(timer);
+ tasklet_hi_schedule(&ttimer->tasklet);
+ return HRTIMER_NORESTART;
}
/*
static DEFINE_PER_CPU(unsigned long, softlockup_touch_ts); /* touch timestamp */
static DEFINE_PER_CPU(unsigned long, softlockup_print_ts); /* print timestamp */
static DEFINE_PER_CPU(struct task_struct *, softlockup_watchdog);
+static DEFINE_PER_CPU(bool, softlock_touch_sync);
static int __read_mostly did_panic;
int __read_mostly softlockup_thresh = 60;
}
EXPORT_SYMBOL(touch_softlockup_watchdog);
+void touch_softlockup_watchdog_sync(void)
+{
+ __raw_get_cpu_var(softlock_touch_sync) = true;
+ __raw_get_cpu_var(softlockup_touch_ts) = 0;
+}
+
void touch_all_softlockup_watchdogs(void)
{
int cpu;
}
if (touch_ts == 0) {
+ if (unlikely(per_cpu(softlock_touch_sync, this_cpu))) {
+ /*
+ * If the time stamp was touched atomically
+ * make sure the scheduler tick is up to date.
+ */
+ per_cpu(softlock_touch_sync, this_cpu) = false;
+ sched_clock_tick();
+ }
__touch_softlockup_watchdog();
return;
}
if (which > PRIO_USER || which < PRIO_PROCESS)
return -EINVAL;
+ rcu_read_lock();
read_lock(&tasklist_lock);
switch (which) {
case PRIO_PROCESS:
}
out_unlock:
read_unlock(&tasklist_lock);
+ rcu_read_unlock();
return retval;
}
{
unsigned long flags;
- spin_lock_irqsave(&watchdog_lock, flags);
+ /*
+ * We use trylock here to avoid a potential dead lock when
+ * kgdb calls this code after the kernel has been stopped with
+ * watchdog_lock held. When watchdog_lock is held we just
+ * return and accept, that the watchdog might trigger and mark
+ * the monitored clock source (usually TSC) unstable.
+ *
+ * This does not affect the other caller clocksource_resume()
+ * because at this point the kernel is UP, interrupts are
+ * disabled and nothing can hold watchdog_lock.
+ */
+ if (!spin_trylock_irqsave(&watchdog_lock, flags))
+ return;
clocksource_reset_watchdog();
spin_unlock_irqrestore(&watchdog_lock, flags);
}
* clocksource_touch_watchdog - Update watchdog
*
* Update the watchdog after exception contexts such as kgdb so as not
- * to incorrectly trip the watchdog.
- *
+ * to incorrectly trip the watchdog. This might fail when the kernel
+ * was stopped in code which holds watchdog_lock.
*/
void clocksource_touch_watchdog(void)
{
set_normalized_timespec(ts, -boottime.tv_sec, -boottime.tv_nsec);
}
+EXPORT_SYMBOL_GPL(getboottime);
/**
* monotonic_to_bootbased - Convert the monotonic time to boot based.
{
*ts = timespec_add_safe(*ts, total_sleep_time);
}
+EXPORT_SYMBOL_GPL(monotonic_to_bootbased);
unsigned long get_seconds(void)
{
config HAVE_FUNCTION_GRAPH_FP_TEST
bool
help
- An arch may pass in a unique value (frame pointer) to both the
- entering and exiting of a function. On exit, the value is compared
- and if it does not match, then it will panic the kernel.
+ See Documentation/trace/ftrace-design.txt
config HAVE_FUNCTION_TRACE_MCOUNT_TEST
bool
struct ring_buffer_per_cpu *cpu_buffer;
unsigned long head;
struct buffer_page *head_page;
+ struct buffer_page *cache_reader_page;
+ unsigned long cache_read;
u64 read_stamp;
};
iter->read_stamp = cpu_buffer->read_stamp;
else
iter->read_stamp = iter->head_page->page->time_stamp;
+ iter->cache_reader_page = cpu_buffer->reader_page;
+ iter->cache_read = cpu_buffer->read;
}
/**
struct ring_buffer_event *event;
int nr_loops = 0;
- if (ring_buffer_iter_empty(iter))
- return NULL;
-
cpu_buffer = iter->cpu_buffer;
buffer = cpu_buffer->buffer;
+ /*
+ * Check if someone performed a consuming read to
+ * the buffer. A consuming read invalidates the iterator
+ * and we need to reset the iterator in this case.
+ */
+ if (unlikely(iter->cache_read != cpu_buffer->read ||
+ iter->cache_reader_page != cpu_buffer->reader_page))
+ rb_iter_reset(iter);
+
again:
+ if (ring_buffer_iter_empty(iter))
+ return NULL;
+
/*
* We repeat when a timestamp is encountered.
* We can get multiple timestamps by nested interrupts or also
if (rb_per_cpu_empty(cpu_buffer))
return NULL;
+ if (iter->head >= local_read(&iter->head_page->page->commit)) {
+ rb_inc_iter(iter);
+ goto again;
+ }
+
event = rb_iter_head_event(iter);
switch (event->type_len) {
return;
}
+ if (WARN_ON_ONCE(pid < 0)) {
+ strcpy(comm, "<XXX>");
+ return;
+ }
+
if (pid > PID_MAX_DEFAULT) {
strcpy(comm, "<...>");
return;
return -EINVAL;
}
/* an address specified */
- ret = strict_strtoul(&argv[0][2], 0, (unsigned long *)&addr);
+ ret = strict_strtoul(&argv[1][0], 0, (unsigned long *)&addr);
if (ret) {
pr_info("Failed to parse address.\n");
return ret;
unsigned long val, flags;
char buf[64];
int ret;
+ int cpu;
if (count >= sizeof(buf))
return -EINVAL;
return ret;
local_irq_save(flags);
+
+ /*
+ * In case we trace inside arch_spin_lock() or after (NMI),
+ * we will cause circular lock, so we also need to increase
+ * the percpu trace_active here.
+ */
+ cpu = smp_processor_id();
+ per_cpu(trace_active, cpu)++;
+
arch_spin_lock(&max_stack_lock);
*ptr = val;
arch_spin_unlock(&max_stack_lock);
+
+ per_cpu(trace_active, cpu)--;
local_irq_restore(flags);
return count;
static void *t_start(struct seq_file *m, loff_t *pos)
{
+ int cpu;
+
local_irq_disable();
+
+ cpu = smp_processor_id();
+ per_cpu(trace_active, cpu)++;
+
arch_spin_lock(&max_stack_lock);
if (*pos == 0)
static void t_stop(struct seq_file *m, void *p)
{
+ int cpu;
+
arch_spin_unlock(&max_stack_lock);
+
+ cpu = smp_processor_id();
+ per_cpu(trace_active, cpu)--;
+
local_irq_enable();
}
return count;
}
-const struct file_operations filter_fops = {
+static const struct file_operations filter_fops = {
.read = filter_read,
.write = filter_write,
};
id = (id | ((1 << (IDR_BITS * l)) - 1)) + 1;
/* if already at the top layer, we need to grow */
- if (!(p = pa[l])) {
+ if (id >= 1 << (idp->layers * IDR_BITS)) {
*starting_id = id;
return IDR_NEED_TO_GROW;
}
+ p = pa[l];
+ BUG_ON(!p);
/* If we need to go up one layer, continue the
* loop; otherwise, restart from the top.
if (unlikely(status))
break;
+ if (mapping_writably_mapped(mapping))
+ flush_dcache_page(page);
+
pagefault_disable();
copied = iov_iter_copy_from_user_atomic(page, i, offset, bytes);
pagefault_enable();
.attrs = hstate_attrs,
};
-static int __init hugetlb_sysfs_add_hstate(struct hstate *h,
- struct kobject *parent,
- struct kobject **hstate_kobjs,
- struct attribute_group *hstate_attr_group)
+static int hugetlb_sysfs_add_hstate(struct hstate *h, struct kobject *parent,
+ struct kobject **hstate_kobjs,
+ struct attribute_group *hstate_attr_group)
{
int retval;
int hi = h - hstates;
goto out_pm;
err = -ENODEV;
+ if (node < 0 || node >= MAX_NUMNODES)
+ goto out_pm;
+
if (!node_state(node, N_HIGH_MEMORY))
goto out_pm;
#define DO_PAGES_STAT_CHUNK_NR 16
const void __user *chunk_pages[DO_PAGES_STAT_CHUNK_NR];
int chunk_status[DO_PAGES_STAT_CHUNK_NR];
- unsigned long i, chunk_nr = DO_PAGES_STAT_CHUNK_NR;
- int err;
- for (i = 0; i < nr_pages; i += chunk_nr) {
- if (chunk_nr > nr_pages - i)
- chunk_nr = nr_pages - i;
+ while (nr_pages) {
+ unsigned long chunk_nr;
- err = copy_from_user(chunk_pages, &pages[i],
- chunk_nr * sizeof(*chunk_pages));
- if (err) {
- err = -EFAULT;
- goto out;
- }
+ chunk_nr = nr_pages;
+ if (chunk_nr > DO_PAGES_STAT_CHUNK_NR)
+ chunk_nr = DO_PAGES_STAT_CHUNK_NR;
+
+ if (copy_from_user(chunk_pages, pages, chunk_nr * sizeof(*chunk_pages)))
+ break;
do_pages_stat_array(mm, chunk_nr, chunk_pages, chunk_status);
- err = copy_to_user(&status[i], chunk_status,
- chunk_nr * sizeof(*chunk_status));
- if (err) {
- err = -EFAULT;
- goto out;
- }
- }
- err = 0;
+ if (copy_to_user(status, chunk_status, chunk_nr * sizeof(*status)))
+ break;
-out:
- return err;
+ pages += chunk_nr;
+ status += chunk_nr;
+ nr_pages -= chunk_nr;
+ }
+ return nr_pages ? -EFAULT : 0;
}
/*
list_for_each_entry(c, &p->children, sibling) {
if (c->mm == p->mm)
continue;
+ if (mem && !task_in_mem_cgroup(c, mem))
+ continue;
if (!oom_kill_task(c))
return 0;
}
static atomic_t vmap_lazy_nr = ATOMIC_INIT(0);
+/* for per-CPU blocks */
+static void purge_fragmented_blocks_allcpus(void);
+
/*
* Purges all lazily-freed vmap areas.
*
} else
spin_lock(&purge_lock);
+ if (sync)
+ purge_fragmented_blocks_allcpus();
+
rcu_read_lock();
list_for_each_entry_rcu(va, &vmap_area_list, list) {
if (va->flags & VM_LAZY_FREE) {
struct vmap_block_queue {
spinlock_t lock;
struct list_head free;
- struct list_head dirty;
- unsigned int nr_dirty;
};
struct vmap_block {
unsigned long free, dirty;
DECLARE_BITMAP(alloc_map, VMAP_BBMAP_BITS);
DECLARE_BITMAP(dirty_map, VMAP_BBMAP_BITS);
- union {
- struct list_head free_list;
- struct rcu_head rcu_head;
- };
+ struct list_head free_list;
+ struct rcu_head rcu_head;
+ struct list_head purge;
};
/* Queue of free and dirty vmap blocks, for allocation and flushing purposes */
vbq = &get_cpu_var(vmap_block_queue);
vb->vbq = vbq;
spin_lock(&vbq->lock);
- list_add(&vb->free_list, &vbq->free);
+ list_add_rcu(&vb->free_list, &vbq->free);
spin_unlock(&vbq->lock);
put_cpu_var(vmap_block_queue);
struct vmap_block *tmp;
unsigned long vb_idx;
- BUG_ON(!list_empty(&vb->free_list));
-
vb_idx = addr_to_vb_idx(vb->va->va_start);
spin_lock(&vmap_block_tree_lock);
tmp = radix_tree_delete(&vmap_block_tree, vb_idx);
call_rcu(&vb->rcu_head, rcu_free_vb);
}
+static void purge_fragmented_blocks(int cpu)
+{
+ LIST_HEAD(purge);
+ struct vmap_block *vb;
+ struct vmap_block *n_vb;
+ struct vmap_block_queue *vbq = &per_cpu(vmap_block_queue, cpu);
+
+ rcu_read_lock();
+ list_for_each_entry_rcu(vb, &vbq->free, free_list) {
+
+ if (!(vb->free + vb->dirty == VMAP_BBMAP_BITS && vb->dirty != VMAP_BBMAP_BITS))
+ continue;
+
+ spin_lock(&vb->lock);
+ if (vb->free + vb->dirty == VMAP_BBMAP_BITS && vb->dirty != VMAP_BBMAP_BITS) {
+ vb->free = 0; /* prevent further allocs after releasing lock */
+ vb->dirty = VMAP_BBMAP_BITS; /* prevent purging it again */
+ bitmap_fill(vb->alloc_map, VMAP_BBMAP_BITS);
+ bitmap_fill(vb->dirty_map, VMAP_BBMAP_BITS);
+ spin_lock(&vbq->lock);
+ list_del_rcu(&vb->free_list);
+ spin_unlock(&vbq->lock);
+ spin_unlock(&vb->lock);
+ list_add_tail(&vb->purge, &purge);
+ } else
+ spin_unlock(&vb->lock);
+ }
+ rcu_read_unlock();
+
+ list_for_each_entry_safe(vb, n_vb, &purge, purge) {
+ list_del(&vb->purge);
+ free_vmap_block(vb);
+ }
+}
+
+static void purge_fragmented_blocks_thiscpu(void)
+{
+ purge_fragmented_blocks(smp_processor_id());
+}
+
+static void purge_fragmented_blocks_allcpus(void)
+{
+ int cpu;
+
+ for_each_possible_cpu(cpu)
+ purge_fragmented_blocks(cpu);
+}
+
static void *vb_alloc(unsigned long size, gfp_t gfp_mask)
{
struct vmap_block_queue *vbq;
struct vmap_block *vb;
unsigned long addr = 0;
unsigned int order;
+ int purge = 0;
BUG_ON(size & ~PAGE_MASK);
BUG_ON(size > PAGE_SIZE*VMAP_MAX_ALLOC);
int i;
spin_lock(&vb->lock);
+ if (vb->free < 1UL << order)
+ goto next;
+
i = bitmap_find_free_region(vb->alloc_map,
VMAP_BBMAP_BITS, order);
- if (i >= 0) {
- addr = vb->va->va_start + (i << PAGE_SHIFT);
- BUG_ON(addr_to_vb_idx(addr) !=
- addr_to_vb_idx(vb->va->va_start));
- vb->free -= 1UL << order;
- if (vb->free == 0) {
- spin_lock(&vbq->lock);
- list_del_init(&vb->free_list);
- spin_unlock(&vbq->lock);
+ if (i < 0) {
+ if (vb->free + vb->dirty == VMAP_BBMAP_BITS) {
+ /* fragmented and no outstanding allocations */
+ BUG_ON(vb->dirty != VMAP_BBMAP_BITS);
+ purge = 1;
}
- spin_unlock(&vb->lock);
- break;
+ goto next;
}
+ addr = vb->va->va_start + (i << PAGE_SHIFT);
+ BUG_ON(addr_to_vb_idx(addr) !=
+ addr_to_vb_idx(vb->va->va_start));
+ vb->free -= 1UL << order;
+ if (vb->free == 0) {
+ spin_lock(&vbq->lock);
+ list_del_rcu(&vb->free_list);
+ spin_unlock(&vbq->lock);
+ }
+ spin_unlock(&vb->lock);
+ break;
+next:
spin_unlock(&vb->lock);
}
+
+ if (purge)
+ purge_fragmented_blocks_thiscpu();
+
put_cpu_var(vmap_block_queue);
rcu_read_unlock();
BUG_ON(!vb);
spin_lock(&vb->lock);
- bitmap_allocate_region(vb->dirty_map, offset >> PAGE_SHIFT, order);
+ BUG_ON(bitmap_allocate_region(vb->dirty_map, offset >> PAGE_SHIFT, order));
vb->dirty += 1UL << order;
if (vb->dirty == VMAP_BBMAP_BITS) {
- BUG_ON(vb->free || !list_empty(&vb->free_list));
+ BUG_ON(vb->free);
spin_unlock(&vb->lock);
free_vmap_block(vb);
} else
vbq = &per_cpu(vmap_block_queue, i);
spin_lock_init(&vbq->lock);
INIT_LIST_HEAD(&vbq->free);
- INIT_LIST_HEAD(&vbq->dirty);
- vbq->nr_dirty = 0;
}
/* Import existing vmlist entries. */
static int parse_opts(char *opts, struct p9_client *clnt)
{
- char *options;
+ char *options, *tmp_options;
char *p;
substring_t args[MAX_OPT_ARGS];
int option;
if (!opts)
return 0;
- options = kstrdup(opts, GFP_KERNEL);
- if (!options) {
+ tmp_options = kstrdup(opts, GFP_KERNEL);
+ if (!tmp_options) {
P9_DPRINTK(P9_DEBUG_ERROR,
"failed to allocate copy of option string\n");
return -ENOMEM;
}
+ options = tmp_options;
while ((p = strsep(&options, ",")) != NULL) {
int token;
break;
case Opt_trans:
clnt->trans_mod = v9fs_get_trans_by_name(&args[0]);
+ if(clnt->trans_mod == NULL) {
+ P9_DPRINTK(P9_DEBUG_ERROR,
+ "Could not find request transport: %s\n",
+ (char *) &args[0]);
+ ret = -EINVAL;
+ goto free_and_return;
+ }
break;
case Opt_legacy:
clnt->dotu = 0;
}
}
- kfree(options);
+free_and_return:
+ kfree(tmp_options);
return ret;
}
clnt->trans = NULL;
spin_lock_init(&clnt->lock);
INIT_LIST_HEAD(&clnt->fidlist);
- clnt->fidpool = p9_idpool_create();
- if (IS_ERR(clnt->fidpool)) {
- err = PTR_ERR(clnt->fidpool);
- clnt->fidpool = NULL;
- goto error;
- }
p9_tag_init(clnt);
err = parse_opts(options, clnt);
if (err < 0)
- goto error;
+ goto free_client;
if (!clnt->trans_mod)
clnt->trans_mod = v9fs_get_default_trans();
err = -EPROTONOSUPPORT;
P9_DPRINTK(P9_DEBUG_ERROR,
"No transport defined or default transport\n");
- goto error;
+ goto free_client;
+ }
+
+ clnt->fidpool = p9_idpool_create();
+ if (IS_ERR(clnt->fidpool)) {
+ err = PTR_ERR(clnt->fidpool);
+ clnt->fidpool = NULL;
+ goto put_trans;
}
P9_DPRINTK(P9_DEBUG_MUX, "clnt %p trans %p msize %d dotu %d\n",
err = clnt->trans_mod->create(clnt, dev_name, options);
if (err)
- goto error;
+ goto destroy_fidpool;
if ((clnt->msize+P9_IOHDRSZ) > clnt->trans_mod->maxsize)
clnt->msize = clnt->trans_mod->maxsize-P9_IOHDRSZ;
err = p9_client_version(clnt);
if (err)
- goto error;
+ goto close_trans;
return clnt;
-error:
- p9_client_destroy(clnt);
+close_trans:
+ clnt->trans_mod->close(clnt);
+destroy_fidpool:
+ p9_idpool_destroy(clnt->fidpool);
+put_trans:
+ v9fs_put_trans(clnt->trans_mod);
+free_client:
+ kfree(clnt);
return ERR_PTR(err);
}
EXPORT_SYMBOL(p9_client_create);
{
int ret;
+ /* NOTE: size shouldn't include its own length */
/* size[2] type[2] dev[4] qid[13] */
/* mode[4] atime[4] mtime[4] length[8]*/
/* name[s] uid[s] gid[s] muid[s] */
- ret = 2+2+4+13+4+4+4+8+2+2+2+2;
+ ret = 2+4+13+4+4+4+8+2+2+2+2;
if (wst->name)
ret += strlen(wst->name);
wst->name, wst->uid, wst->gid, wst->muid, wst->extension,
wst->n_uid, wst->n_gid, wst->n_muid);
- req = p9_client_rpc(clnt, P9_TWSTAT, "dwS", fid->fid, wst->size, wst);
+ req = p9_client_rpc(clnt, P9_TWSTAT, "dwS", fid->fid, wst->size+2, wst);
if (IS_ERR(req)) {
err = PTR_ERR(req);
goto error;
char *p;
substring_t args[MAX_OPT_ARGS];
int option;
- char *options;
+ char *options, *tmp_options;
int ret;
opts->port = P9_PORT;
if (!params)
return 0;
- options = kstrdup(params, GFP_KERNEL);
- if (!options) {
+ tmp_options = kstrdup(params, GFP_KERNEL);
+ if (!tmp_options) {
P9_DPRINTK(P9_DEBUG_ERROR,
"failed to allocate copy of option string\n");
return -ENOMEM;
}
+ options = tmp_options;
while ((p = strsep(&options, ",")) != NULL) {
int token;
continue;
}
}
- kfree(options);
+
+ kfree(tmp_options);
return 0;
}
char *p;
substring_t args[MAX_OPT_ARGS];
int option;
- char *options;
+ char *options, *tmp_options;
int ret;
opts->port = P9_PORT;
if (!params)
return 0;
- options = kstrdup(params, GFP_KERNEL);
- if (!options) {
+ tmp_options = kstrdup(params, GFP_KERNEL);
+ if (!tmp_options) {
P9_DPRINTK(P9_DEBUG_ERROR,
"failed to allocate copy of option string\n");
return -ENOMEM;
}
+ options = tmp_options;
while ((p = strsep(&options, ",")) != NULL) {
int token;
}
/* RQ must be at least as large as the SQ */
opts->rq_depth = max(opts->rq_depth, opts->sq_depth);
- kfree(options);
+ kfree(tmp_options);
return 0;
}
struct virtio_chan *chan = client->trans;
mutex_lock(&virtio_9p_lock);
- chan->inuse = false;
+ if (chan)
+ chan->inuse = false;
mutex_unlock(&virtio_9p_lock);
}
}
client->trans = (void *)chan;
+ client->status = Connected;
chan->client = client;
return 0;
if (acl->state == BT_CONNECTED &&
(sco->state == BT_OPEN || sco->state == BT_CLOSED)) {
+ acl->power_save = 1;
+ hci_conn_enter_active_mode(acl);
+
if (lmp_esco_capable(hdev))
hci_setup_sync(sco, acl->handle);
else
break;
case 0x1c: /* SCO interval rejected */
+ case 0x1a: /* Unsupported Remote Feature */
case 0x1f: /* Unspecified error */
if (conn->out && conn->attempt < 2) {
conn->pkt_type = (hdev->esco_type & SCO_ESCO_MASK) |
input_sync(dev);
}
+static int __hidp_send_ctrl_message(struct hidp_session *session,
+ unsigned char hdr, unsigned char *data, int size)
+{
+ struct sk_buff *skb;
+
+ BT_DBG("session %p data %p size %d", session, data, size);
+
+ if (!(skb = alloc_skb(size + 1, GFP_ATOMIC))) {
+ BT_ERR("Can't allocate memory for new frame");
+ return -ENOMEM;
+ }
+
+ *skb_put(skb, 1) = hdr;
+ if (data && size > 0)
+ memcpy(skb_put(skb, size), data, size);
+
+ skb_queue_tail(&session->ctrl_transmit, skb);
+
+ return 0;
+}
+
+static inline int hidp_send_ctrl_message(struct hidp_session *session,
+ unsigned char hdr, unsigned char *data, int size)
+{
+ int err;
+
+ err = __hidp_send_ctrl_message(session, hdr, data, size);
+
+ hidp_schedule(session);
+
+ return err;
+}
+
static int hidp_queue_report(struct hidp_session *session,
unsigned char *data, int size)
{
return hidp_queue_report(session, buf, rsize);
}
-static int hidp_output_raw_report(struct hid_device *hid, unsigned char *data, size_t count)
+static int hidp_output_raw_report(struct hid_device *hid, unsigned char *data, size_t count,
+ unsigned char report_type)
{
- if (hidp_queue_report(hid->driver_data, data, count))
+ switch (report_type) {
+ case HID_FEATURE_REPORT:
+ report_type = HIDP_TRANS_SET_REPORT | HIDP_DATA_RTYPE_FEATURE;
+ break;
+ case HID_OUTPUT_REPORT:
+ report_type = HIDP_TRANS_DATA | HIDP_DATA_RTYPE_OUPUT;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (hidp_send_ctrl_message(hid->driver_data, report_type,
+ data, count))
return -ENOMEM;
return count;
}
del_timer(&session->timer);
}
-static int __hidp_send_ctrl_message(struct hidp_session *session,
- unsigned char hdr, unsigned char *data, int size)
-{
- struct sk_buff *skb;
-
- BT_DBG("session %p data %p size %d", session, data, size);
-
- if (!(skb = alloc_skb(size + 1, GFP_ATOMIC))) {
- BT_ERR("Can't allocate memory for new frame");
- return -ENOMEM;
- }
-
- *skb_put(skb, 1) = hdr;
- if (data && size > 0)
- memcpy(skb_put(skb, size), data, size);
-
- skb_queue_tail(&session->ctrl_transmit, skb);
-
- return 0;
-}
-
-static inline int hidp_send_ctrl_message(struct hidp_session *session,
- unsigned char hdr, unsigned char *data, int size)
-{
- int err;
-
- err = __hidp_send_ctrl_message(session, hdr, data, size);
-
- hidp_schedule(session);
-
- return err;
-}
-
static void hidp_process_handshake(struct hidp_session *session,
unsigned char param)
{
static int hidp_parse(struct hid_device *hid)
{
struct hidp_session *session = hid->driver_data;
- struct hidp_connadd_req *req = session->req;
- unsigned char *buf;
- int ret;
-
- buf = kmalloc(req->rd_size, GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
-
- if (copy_from_user(buf, req->rd_data, req->rd_size)) {
- kfree(buf);
- return -EFAULT;
- }
-
- ret = hid_parse_report(session->hid, buf, req->rd_size);
-
- kfree(buf);
-
- if (ret)
- return ret;
-
- session->req = NULL;
- return 0;
+ return hid_parse_report(session->hid, session->rd_data,
+ session->rd_size);
}
static int hidp_start(struct hid_device *hid)
bdaddr_t src, dst;
int err;
+ session->rd_data = kzalloc(req->rd_size, GFP_KERNEL);
+ if (!session->rd_data)
+ return -ENOMEM;
+
+ if (copy_from_user(session->rd_data, req->rd_data, req->rd_size)) {
+ err = -EFAULT;
+ goto fault;
+ }
+ session->rd_size = req->rd_size;
+
hid = hid_allocate_device();
- if (IS_ERR(hid))
- return PTR_ERR(hid);
+ if (IS_ERR(hid)) {
+ err = PTR_ERR(hid);
+ goto fault;
+ }
session->hid = hid;
- session->req = req;
+
hid->driver_data = session;
baswap(&src, &bt_sk(session->ctrl_sock->sk)->src);
hid_destroy_device(hid);
session->hid = NULL;
+fault:
+ kfree(session->rd_data);
+ session->rd_data = NULL;
+
return err;
}
session->hid = NULL;
}
+ kfree(session->rd_data);
+ session->rd_data = NULL;
+
purge:
skb_queue_purge(&session->ctrl_transmit);
skb_queue_purge(&session->intr_transmit);
struct sk_buff_head ctrl_transmit;
struct sk_buff_head intr_transmit;
- struct hidp_connadd_req *req;
+ /* Report descriptor */
+ __u8 *rd_data;
+ uint rd_size;
};
static inline void hidp_schedule(struct hidp_session *session)
while ((skb = sk->sk_send_head) && (!l2cap_tx_window_full(sk)) &&
!(pi->conn_state & L2CAP_CONN_REMOTE_BUSY)) {
- tx_skb = skb_clone(skb, GFP_ATOMIC);
if (pi->remote_max_tx &&
bt_cb(skb)->retries == pi->remote_max_tx) {
break;
}
+ tx_skb = skb_clone(skb, GFP_ATOMIC);
+
bt_cb(skb)->retries++;
control = get_unaligned_le16(tx_skb->data + L2CAP_HDR_SIZE);
struct l2cap_pinfo *pi;
u16 control, len;
u8 tx_seq;
- int err;
sk = l2cap_get_chan_by_scid(&conn->chan_list, cid);
if (!sk) {
goto drop;
if (__is_iframe(control))
- err = l2cap_data_channel_iframe(sk, control, skb);
+ l2cap_data_channel_iframe(sk, control, skb);
else
- err = l2cap_data_channel_sframe(sk, control, skb);
+ l2cap_data_channel_sframe(sk, control, skb);
- if (!err)
- goto done;
- break;
+ goto done;
case L2CAP_MODE_STREAMING:
control = get_unaligned_le16(skb->data);
else
pi->expected_tx_seq = tx_seq + 1;
- err = l2cap_sar_reassembly_sdu(sk, skb, control);
+ l2cap_sar_reassembly_sdu(sk, skb, control);
goto done;
BT_DBG("session %p state %ld", s, s->state);
set_bit(RFCOMM_TIMED_OUT, &s->flags);
- rfcomm_session_put(s);
rfcomm_schedule(RFCOMM_SCHED_TIMEO);
}
break;
case BT_DISCONN:
- rfcomm_session_put(s);
+ /* When socket is closed and we are not RFCOMM
+ * initiator rfcomm_process_rx already calls
+ * rfcomm_session_put() */
+ if (s->sock->sk->sk_state != BT_CLOSED)
+ rfcomm_session_put(s);
break;
}
}
if (test_and_clear_bit(RFCOMM_TIMED_OUT, &s->flags)) {
s->state = BT_DISCONN;
rfcomm_send_disc(s, 0);
+ rfcomm_session_put(s);
continue;
}
switch (ret) {
case GRO_NORMAL:
case GRO_HELD:
- skb->protocol = eth_type_trans(skb, napi->dev);
+ skb->protocol = eth_type_trans(skb, skb->dev);
if (ret == GRO_HELD)
skb_gro_pull(skb, -ETH_HLEN);
#include <linux/string.h>
#include <linux/types.h>
#include <net/net_namespace.h>
+#include <linux/sched.h>
#include <net/dst.h>
while ((dst = next) != NULL) {
next = dst->next;
prefetch(&next->next);
+ cond_resched();
if (likely(atomic_read(&dst->__refcnt))) {
last->next = dst;
last = dst;
case ETHTOOL_GPERMADDR:
case ETHTOOL_GUFO:
case ETHTOOL_GGSO:
+ case ETHTOOL_GGRO:
case ETHTOOL_GFLAGS:
case ETHTOOL_GPFLAGS:
case ETHTOOL_GRXFH:
const struct iw_statistics *iw;
ssize_t ret = -EINVAL;
- rtnl_lock();
+ if (!rtnl_trylock())
+ return restart_syscall();
if (dev_isalive(dev)) {
iw = get_wireless_stats(dev);
if (iw)
wait_event_interruptible_timeout(t->queue,
t->control != 0,
HZ/10);
+ try_to_freeze();
continue;
}
va_list args;
va_start(args, fmt);
- vsnprintf(slab_name_fmt, sizeof(slab_name_fmt), fmt, args);
+ vsnprintf(slab_name_fmt, CCID_SLAB_NAME_LENGTH, fmt, args);
va_end(args);
slab = kmem_cache_create(slab_name_fmt, sizeof(struct ccid) + obj_size, 0,
#include <linux/list.h>
#include <linux/module.h>
-#define CCID_MAX 255
+/* maximum value for a CCID (RFC 4340, 19.5) */
+#define CCID_MAX 255
+#define CCID_SLAB_NAME_LENGTH 32
struct tcp_info;
const char *ccid_name;
struct kmem_cache *ccid_hc_rx_slab,
*ccid_hc_tx_slab;
- char ccid_hc_rx_slab_name[32];
- char ccid_hc_tx_slab_name[32];
+ char ccid_hc_rx_slab_name[CCID_SLAB_NAME_LENGTH];
+ char ccid_hc_tx_slab_name[CCID_SLAB_NAME_LENGTH];
__u32 ccid_hc_rx_obj_size,
ccid_hc_tx_obj_size;
/* Interface Routines */
if (!proc_net_fops_create(&init_net, procname, S_IRUSR, &dccpprobe_fops))
goto err0;
- ret = try_then_request_module((register_jprobe(&dccp_send_probe) == 0),
- "dccp");
+ try_then_request_module((ret = register_jprobe(&dccp_send_probe)) == 0,
+ "dccp");
if (ret)
goto err1;
{
int *valp = ctl->data;
int val = *valp;
+ loff_t pos = *ppos;
int ret = proc_dointvec(ctl, write, buffer, lenp, ppos);
if (write && *valp != val) {
struct net *net = ctl->extra2;
if (valp != &IPV4_DEVCONF_DFLT(net, FORWARDING)) {
- if (!rtnl_trylock())
+ if (!rtnl_trylock()) {
+ /* Restore the original values before restarting */
+ *valp = val;
+ *ppos = pos;
return restart_syscall();
+ }
if (valp == &IPV4_DEVCONF_ALL(net, FORWARDING)) {
inet_forward_change(net);
} else if (*valp) {
break;
case IGMP_HOST_MEMBERSHIP_REPORT:
case IGMPV2_HOST_MEMBERSHIP_REPORT:
- case IGMPV3_HOST_MEMBERSHIP_REPORT:
/* Is it our report looped back? */
if (skb_rtable(skb)->fl.iif == 0)
break;
in_dev_put(in_dev);
return pim_rcv_v1(skb);
#endif
+ case IGMPV3_HOST_MEMBERSHIP_REPORT:
case IGMP_DVMRP:
case IGMP_TRACE:
case IGMP_HOST_LEAVE_MESSAGE:
if (x->props.mode == XFRM_MODE_TUNNEL) {
err = ipcomp_tunnel_attach(x);
if (err)
- goto error_tunnel;
+ goto out;
}
err = 0;
out:
return err;
-
-error_tunnel:
- ipcomp_destroy(x);
- goto out;
}
static const struct xfrm_type ipcomp_type = {
if (t && !IS_ERR(t)) {
struct arpt_getinfo info;
const struct xt_table_info *private = t->private;
-
#ifdef CONFIG_COMPAT
+ struct xt_table_info tmp;
+
if (compat) {
- struct xt_table_info tmp;
ret = compat_table_info(private, &tmp);
xt_compat_flush_offsets(NFPROTO_ARP);
private = &tmp;
if (t && !IS_ERR(t)) {
struct ipt_getinfo info;
const struct xt_table_info *private = t->private;
-
#ifdef CONFIG_COMPAT
+ struct xt_table_info tmp;
+
if (compat) {
- struct xt_table_info tmp;
ret = compat_table_info(private, &tmp);
xt_compat_flush_offsets(AF_INET);
private = &tmp;
},
{
.procname = "ip_conntrack_buckets",
- .data = &nf_conntrack_htable_size,
+ .data = &init_net.ct.htable_size,
.maxlen = sizeof(unsigned int),
.mode = 0444,
.proc_handler = proc_dointvec,
struct hlist_nulls_node *n;
for (st->bucket = 0;
- st->bucket < nf_conntrack_htable_size;
+ st->bucket < net->ct.htable_size;
st->bucket++) {
n = rcu_dereference(net->ct.hash[st->bucket].first);
if (!is_a_nulls(n))
head = rcu_dereference(head->next);
while (is_a_nulls(head)) {
if (likely(get_nulls_value(head) == st->bucket)) {
- if (++st->bucket >= nf_conntrack_htable_size)
+ if (++st->bucket >= net->ct.htable_size)
return NULL;
}
head = rcu_dereference(net->ct.hash[st->bucket].first);
static struct nf_conntrack_l3proto *l3proto __read_mostly;
-/* Calculated at init based on memory size */
-static unsigned int nf_nat_htable_size __read_mostly;
-
#define MAX_IP_NAT_PROTO 256
static const struct nf_nat_protocol *nf_nat_protos[MAX_IP_NAT_PROTO]
__read_mostly;
/* We keep an extra hash for each conntrack, for fast searching. */
static inline unsigned int
-hash_by_src(const struct nf_conntrack_tuple *tuple)
+hash_by_src(const struct net *net, const struct nf_conntrack_tuple *tuple)
{
unsigned int hash;
hash = jhash_3words((__force u32)tuple->src.u3.ip,
(__force u32)tuple->src.u.all,
tuple->dst.protonum, 0);
- return ((u64)hash * nf_nat_htable_size) >> 32;
+ return ((u64)hash * net->ipv4.nat_htable_size) >> 32;
}
/* Is this tuple already taken? (not by us) */
struct nf_conntrack_tuple *result,
const struct nf_nat_range *range)
{
- unsigned int h = hash_by_src(tuple);
+ unsigned int h = hash_by_src(net, tuple);
const struct nf_conn_nat *nat;
const struct nf_conn *ct;
const struct hlist_node *n;
if (have_to_hash) {
unsigned int srchash;
- srchash = hash_by_src(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple);
+ srchash = hash_by_src(net, &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple);
spin_lock_bh(&nf_nat_lock);
/* nf_conntrack_alter_reply might re-allocate exntension aera */
nat = nfct_nat(ct);
static int __net_init nf_nat_net_init(struct net *net)
{
- net->ipv4.nat_bysource = nf_ct_alloc_hashtable(&nf_nat_htable_size,
- &net->ipv4.nat_vmalloced, 0);
+ /* Leave them the same for the moment. */
+ net->ipv4.nat_htable_size = net->ct.htable_size;
+ net->ipv4.nat_bysource = nf_ct_alloc_hashtable(&net->ipv4.nat_htable_size,
+ &net->ipv4.nat_vmalloced, 0);
if (!net->ipv4.nat_bysource)
return -ENOMEM;
return 0;
nf_ct_iterate_cleanup(net, &clean_nat, NULL);
synchronize_rcu();
nf_ct_free_hashtable(net->ipv4.nat_bysource, net->ipv4.nat_vmalloced,
- nf_nat_htable_size);
+ net->ipv4.nat_htable_size);
}
static struct pernet_operations nf_nat_net_ops = {
return ret;
}
- /* Leave them the same for the moment. */
- nf_nat_htable_size = nf_conntrack_htable_size;
-
ret = register_pernet_subsys(&nf_nat_net_ops);
if (ret < 0)
goto cleanup_extend;
/* tcp_ack considers this ACK as duplicate
* and does not calculate rtt.
- * Fix it at least with timestamps.
+ * Force it here.
*/
- if (tp->rx_opt.saw_tstamp &&
- tp->rx_opt.rcv_tsecr && !tp->srtt)
- tcp_ack_saw_tstamp(sk, 0);
+ tcp_ack_update_rtt(sk, 0, 0);
if (tp->rx_opt.tstamp_ok)
tp->advmss -= TCPOLEN_TSTAMP_ALIGNED;
if (p == &net->ipv6.devconf_dflt->forwarding)
return 0;
- if (!rtnl_trylock())
+ if (!rtnl_trylock()) {
+ /* Restore the original values before restarting */
+ *p = old;
return restart_syscall();
+ }
if (p == &net->ipv6.devconf_all->forwarding) {
__s32 newf = net->ipv6.devconf_all->forwarding;
{
int *valp = ctl->data;
int val = *valp;
+ loff_t pos = *ppos;
int ret;
ret = proc_dointvec(ctl, write, buffer, lenp, ppos);
if (write)
ret = addrconf_fixup_forwarding(ctl, valp, val);
+ if (ret)
+ *ppos = pos;
return ret;
}
if (p == &net->ipv6.devconf_dflt->disable_ipv6)
return 0;
- if (!rtnl_trylock())
+ if (!rtnl_trylock()) {
+ /* Restore the original values before restarting */
+ *p = old;
return restart_syscall();
+ }
if (p == &net->ipv6.devconf_all->disable_ipv6) {
__s32 newf = net->ipv6.devconf_all->disable_ipv6;
{
int *valp = ctl->data;
int val = *valp;
+ loff_t pos = *ppos;
int ret;
ret = proc_dointvec(ctl, write, buffer, lenp, ppos);
if (write)
ret = addrconf_disable_ipv6(ctl, valp, val);
+ if (ret)
+ *ppos = pos;
return ret;
}
if (x->props.mode == XFRM_MODE_TUNNEL) {
err = ipcomp6_tunnel_attach(x);
if (err)
- goto error_tunnel;
+ goto out;
}
err = 0;
out:
return err;
-error_tunnel:
- ipcomp_destroy(x);
-
- goto out;
}
static const struct xfrm_type ipcomp6_type =
if (t && !IS_ERR(t)) {
struct ip6t_getinfo info;
const struct xt_table_info *private = t->private;
-
#ifdef CONFIG_COMPAT
+ struct xt_table_info tmp;
+
if (compat) {
- struct xt_table_info tmp;
ret = compat_table_info(private, &tmp);
xt_compat_flush_offsets(AF_INET6);
private = &tmp;
struct inet_frag_queue q;
__be32 id; /* fragment id */
+ u32 user;
struct in6_addr saddr;
struct in6_addr daddr;
/* Query PPP channel and unit number */
case PPPIOCGCHAN:
+ lock_kernel();
if(ap->ppp_open && !put_user(ppp_channel_index(&ap->chan),
(int __user *)argp))
err = 0;
+ unlock_kernel();
break;
case PPPIOCGUNIT:
lock_kernel();
if(ap->ppp_open && !put_user(ppp_unit_number(&ap->chan),
(int __user *)argp))
- err = 0;
+ err = 0;
+ unlock_kernel();
break;
/* All these ioctls can be passed both directly and from ppp_generic,
static void __exit ipsec_pfkey_exit(void)
{
- unregister_pernet_subsys(&pfkey_net_ops);
xfrm_unregister_km(&pfkeyv2_mgr);
sock_unregister(PF_KEY);
+ unregister_pernet_subsys(&pfkey_net_ops);
proto_unregister(&key_proto);
}
if (err != 0)
goto out;
- err = sock_register(&pfkey_family_ops);
+ err = register_pernet_subsys(&pfkey_net_ops);
if (err != 0)
goto out_unregister_key_proto;
+ err = sock_register(&pfkey_family_ops);
+ if (err != 0)
+ goto out_unregister_pernet;
err = xfrm_register_km(&pfkeyv2_mgr);
if (err != 0)
goto out_sock_unregister;
- err = register_pernet_subsys(&pfkey_net_ops);
- if (err != 0)
- goto out_xfrm_unregister_km;
out:
return err;
-out_xfrm_unregister_km:
- xfrm_unregister_km(&pfkeyv2_mgr);
+
out_sock_unregister:
sock_unregister(PF_KEY);
+out_unregister_pernet:
+ unregister_pernet_subsys(&pfkey_net_ops);
out_unregister_key_proto:
proto_unregister(&key_proto);
goto out;
__entry->ret = ret;
__entry->action = action;
__entry->tid = tid;
- __entry->ssn = *ssn;
+ __entry->ssn = ssn ? *ssn : 0;
),
TP_printk(
}
if (pos[1] != 0 &&
(pos[1] != ifibss->ssid_len ||
- !memcmp(pos + 2, ifibss->ssid, ifibss->ssid_len))) {
+ memcmp(pos + 2, ifibss->ssid, ifibss->ssid_len))) {
/* Ignore ProbeReq for foreign SSID */
return;
}
info->control.rates[i].count = 1;
}
+ if (sdata->local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL)
+ return;
+
if (sta && sdata->force_unicast_rateidx > -1) {
info->control.rates[0].idx = sdata->force_unicast_rateidx;
} else {
if (local->scan_req)
return -EBUSY;
+ if (req != local->int_scan_req &&
+ sdata->vif.type == NL80211_IFTYPE_STATION &&
+ !list_empty(&ifmgd->work_list)) {
+ /* actually wait for the work it's doing to finish/time out */
+ set_bit(IEEE80211_STA_REQ_SCAN, &ifmgd->request);
+ local->scan_req = req;
+ local->scan_sdata = sdata;
+ return 0;
+ }
+
if (local->ops->hw_scan) {
u8 *ies;
local->scan_req = req;
local->scan_sdata = sdata;
- if (req != local->int_scan_req &&
- sdata->vif.type == NL80211_IFTYPE_STATION &&
- !list_empty(&ifmgd->work_list)) {
- /* actually wait for the work it's doing to finish/time out */
- set_bit(IEEE80211_STA_REQ_SCAN, &ifmgd->request);
- return 0;
- }
-
if (local->ops->hw_scan)
__set_bit(SCAN_HW_SCANNING, &local->scanning);
else
#include <linux/netdevice.h>
#include <linux/socket.h>
#include <linux/mm.h>
+#include <linux/nsproxy.h>
#include <linux/rculist_nulls.h>
#include <net/netfilter/nf_conntrack.h>
struct nf_conn nf_conntrack_untracked __read_mostly;
EXPORT_SYMBOL_GPL(nf_conntrack_untracked);
-static struct kmem_cache *nf_conntrack_cachep __read_mostly;
-
static int nf_conntrack_hash_rnd_initted;
static unsigned int nf_conntrack_hash_rnd;
return ((u64)h * size) >> 32;
}
-static inline u_int32_t hash_conntrack(const struct nf_conntrack_tuple *tuple)
+static inline u_int32_t hash_conntrack(const struct net *net,
+ const struct nf_conntrack_tuple *tuple)
{
- return __hash_conntrack(tuple, nf_conntrack_htable_size,
+ return __hash_conntrack(tuple, net->ct.htable_size,
nf_conntrack_hash_rnd);
}
{
struct nf_conntrack_tuple_hash *h;
struct hlist_nulls_node *n;
- unsigned int hash = hash_conntrack(tuple);
+ unsigned int hash = hash_conntrack(net, tuple);
/* Disable BHs the entire time since we normally need to disable them
* at least once for the stats anyway.
void nf_conntrack_hash_insert(struct nf_conn *ct)
{
+ struct net *net = nf_ct_net(ct);
unsigned int hash, repl_hash;
- hash = hash_conntrack(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple);
- repl_hash = hash_conntrack(&ct->tuplehash[IP_CT_DIR_REPLY].tuple);
+ hash = hash_conntrack(net, &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple);
+ repl_hash = hash_conntrack(net, &ct->tuplehash[IP_CT_DIR_REPLY].tuple);
__nf_conntrack_hash_insert(ct, hash, repl_hash);
}
if (CTINFO2DIR(ctinfo) != IP_CT_DIR_ORIGINAL)
return NF_ACCEPT;
- hash = hash_conntrack(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple);
- repl_hash = hash_conntrack(&ct->tuplehash[IP_CT_DIR_REPLY].tuple);
+ hash = hash_conntrack(net, &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple);
+ repl_hash = hash_conntrack(net, &ct->tuplehash[IP_CT_DIR_REPLY].tuple);
/* We're not in hash table, and we refuse to set up related
connections for unconfirmed conns. But packet copies and
struct net *net = nf_ct_net(ignored_conntrack);
struct nf_conntrack_tuple_hash *h;
struct hlist_nulls_node *n;
- unsigned int hash = hash_conntrack(tuple);
+ unsigned int hash = hash_conntrack(net, tuple);
/* Disable BHs the entire time since we need to disable them at
* least once for the stats anyway.
int dropped = 0;
rcu_read_lock();
- for (i = 0; i < nf_conntrack_htable_size; i++) {
+ for (i = 0; i < net->ct.htable_size; i++) {
hlist_nulls_for_each_entry_rcu(h, n, &net->ct.hash[hash],
hnnode) {
tmp = nf_ct_tuplehash_to_ctrack(h);
if (cnt >= NF_CT_EVICTION_RANGE)
break;
- hash = (hash + 1) % nf_conntrack_htable_size;
+ hash = (hash + 1) % net->ct.htable_size;
}
rcu_read_unlock();
if (nf_conntrack_max &&
unlikely(atomic_read(&net->ct.count) > nf_conntrack_max)) {
- unsigned int hash = hash_conntrack(orig);
+ unsigned int hash = hash_conntrack(net, orig);
if (!early_drop(net, hash)) {
atomic_dec(&net->ct.count);
if (net_ratelimit())
* Do not use kmem_cache_zalloc(), as this cache uses
* SLAB_DESTROY_BY_RCU.
*/
- ct = kmem_cache_alloc(nf_conntrack_cachep, gfp);
+ ct = kmem_cache_alloc(net->ct.nf_conntrack_cachep, gfp);
if (ct == NULL) {
pr_debug("nf_conntrack_alloc: Can't alloc conntrack.\n");
atomic_dec(&net->ct.count);
nf_ct_ext_destroy(ct);
atomic_dec(&net->ct.count);
nf_ct_ext_free(ct);
- kmem_cache_free(nf_conntrack_cachep, ct);
+ kmem_cache_free(net->ct.nf_conntrack_cachep, ct);
}
EXPORT_SYMBOL_GPL(nf_conntrack_free);
struct hlist_nulls_node *n;
spin_lock_bh(&nf_conntrack_lock);
- for (; *bucket < nf_conntrack_htable_size; (*bucket)++) {
+ for (; *bucket < net->ct.htable_size; (*bucket)++) {
hlist_nulls_for_each_entry(h, n, &net->ct.hash[*bucket], hnnode) {
ct = nf_ct_tuplehash_to_ctrack(h);
if (iter(ct, data))
static void nf_conntrack_cleanup_init_net(void)
{
+ /* wait until all references to nf_conntrack_untracked are dropped */
+ while (atomic_read(&nf_conntrack_untracked.ct_general.use) > 1)
+ schedule();
+
nf_conntrack_helper_fini();
nf_conntrack_proto_fini();
- kmem_cache_destroy(nf_conntrack_cachep);
}
static void nf_conntrack_cleanup_net(struct net *net)
schedule();
goto i_see_dead_people;
}
- /* wait until all references to nf_conntrack_untracked are dropped */
- while (atomic_read(&nf_conntrack_untracked.ct_general.use) > 1)
- schedule();
nf_ct_free_hashtable(net->ct.hash, net->ct.hash_vmalloc,
- nf_conntrack_htable_size);
+ net->ct.htable_size);
nf_conntrack_ecache_fini(net);
nf_conntrack_acct_fini(net);
nf_conntrack_expect_fini(net);
+ kmem_cache_destroy(net->ct.nf_conntrack_cachep);
+ kfree(net->ct.slabname);
free_percpu(net->ct.stat);
}
{
int i, bucket, vmalloced, old_vmalloced;
unsigned int hashsize, old_size;
- int rnd;
struct hlist_nulls_head *hash, *old_hash;
struct nf_conntrack_tuple_hash *h;
+ if (current->nsproxy->net_ns != &init_net)
+ return -EOPNOTSUPP;
+
/* On boot, we can set this without any fancy locking. */
if (!nf_conntrack_htable_size)
return param_set_uint(val, kp);
if (!hash)
return -ENOMEM;
- /* We have to rehahs for the new table anyway, so we also can
- * use a newrandom seed */
- get_random_bytes(&rnd, sizeof(rnd));
-
/* Lookups in the old hash might happen in parallel, which means we
* might get false negatives during connection lookup. New connections
* created because of a false negative won't make it into the hash
* though since that required taking the lock.
*/
spin_lock_bh(&nf_conntrack_lock);
- for (i = 0; i < nf_conntrack_htable_size; i++) {
+ for (i = 0; i < init_net.ct.htable_size; i++) {
while (!hlist_nulls_empty(&init_net.ct.hash[i])) {
h = hlist_nulls_entry(init_net.ct.hash[i].first,
struct nf_conntrack_tuple_hash, hnnode);
hlist_nulls_del_rcu(&h->hnnode);
- bucket = __hash_conntrack(&h->tuple, hashsize, rnd);
+ bucket = __hash_conntrack(&h->tuple, hashsize,
+ nf_conntrack_hash_rnd);
hlist_nulls_add_head_rcu(&h->hnnode, &hash[bucket]);
}
}
- old_size = nf_conntrack_htable_size;
+ old_size = init_net.ct.htable_size;
old_vmalloced = init_net.ct.hash_vmalloc;
old_hash = init_net.ct.hash;
- nf_conntrack_htable_size = hashsize;
+ init_net.ct.htable_size = nf_conntrack_htable_size = hashsize;
init_net.ct.hash_vmalloc = vmalloced;
init_net.ct.hash = hash;
- nf_conntrack_hash_rnd = rnd;
spin_unlock_bh(&nf_conntrack_lock);
nf_ct_free_hashtable(old_hash, old_vmalloced, old_size);
NF_CONNTRACK_VERSION, nf_conntrack_htable_size,
nf_conntrack_max);
- nf_conntrack_cachep = kmem_cache_create("nf_conntrack",
- sizeof(struct nf_conn),
- 0, SLAB_DESTROY_BY_RCU, NULL);
- if (!nf_conntrack_cachep) {
- printk(KERN_ERR "Unable to create nf_conn slab cache\n");
- ret = -ENOMEM;
- goto err_cache;
- }
-
ret = nf_conntrack_proto_init();
if (ret < 0)
goto err_proto;
if (ret < 0)
goto err_helper;
+ /* Set up fake conntrack: to never be deleted, not in any hashes */
+#ifdef CONFIG_NET_NS
+ nf_conntrack_untracked.ct_net = &init_net;
+#endif
+ atomic_set(&nf_conntrack_untracked.ct_general.use, 1);
+ /* - and look it like as a confirmed connection */
+ set_bit(IPS_CONFIRMED_BIT, &nf_conntrack_untracked.status);
+
return 0;
err_helper:
nf_conntrack_proto_fini();
err_proto:
- kmem_cache_destroy(nf_conntrack_cachep);
-err_cache:
return ret;
}
ret = -ENOMEM;
goto err_stat;
}
- net->ct.hash = nf_ct_alloc_hashtable(&nf_conntrack_htable_size,
+
+ net->ct.slabname = kasprintf(GFP_KERNEL, "nf_conntrack_%p", net);
+ if (!net->ct.slabname) {
+ ret = -ENOMEM;
+ goto err_slabname;
+ }
+
+ net->ct.nf_conntrack_cachep = kmem_cache_create(net->ct.slabname,
+ sizeof(struct nf_conn), 0,
+ SLAB_DESTROY_BY_RCU, NULL);
+ if (!net->ct.nf_conntrack_cachep) {
+ printk(KERN_ERR "Unable to create nf_conn slab cache\n");
+ ret = -ENOMEM;
+ goto err_cache;
+ }
+
+ net->ct.htable_size = nf_conntrack_htable_size;
+ net->ct.hash = nf_ct_alloc_hashtable(&net->ct.htable_size,
&net->ct.hash_vmalloc, 1);
if (!net->ct.hash) {
ret = -ENOMEM;
if (ret < 0)
goto err_ecache;
- /* Set up fake conntrack:
- - to never be deleted, not in any hashes */
-#ifdef CONFIG_NET_NS
- nf_conntrack_untracked.ct_net = &init_net;
-#endif
- atomic_set(&nf_conntrack_untracked.ct_general.use, 1);
- /* - and look it like as a confirmed connection */
- set_bit(IPS_CONFIRMED_BIT, &nf_conntrack_untracked.status);
-
return 0;
err_ecache:
nf_conntrack_expect_fini(net);
err_expect:
nf_ct_free_hashtable(net->ct.hash, net->ct.hash_vmalloc,
- nf_conntrack_htable_size);
+ net->ct.htable_size);
err_hash:
+ kmem_cache_destroy(net->ct.nf_conntrack_cachep);
+err_cache:
+ kfree(net->ct.slabname);
+err_slabname:
free_percpu(net->ct.stat);
err_stat:
return ret;
#endif /* CONFIG_PROC_FS */
}
-module_param_named(expect_hashsize, nf_ct_expect_hsize, uint, 0600);
+module_param_named(expect_hashsize, nf_ct_expect_hsize, uint, 0400);
int nf_conntrack_expect_init(struct net *net)
{
if (net_eq(net, &init_net)) {
if (!nf_ct_expect_hsize) {
- nf_ct_expect_hsize = nf_conntrack_htable_size / 256;
+ nf_ct_expect_hsize = net->ct.htable_size / 256;
if (!nf_ct_expect_hsize)
nf_ct_expect_hsize = 1;
}
/* Get rid of expecteds, set helpers to NULL. */
hlist_nulls_for_each_entry(h, nn, &net->ct.unconfirmed, hnnode)
unhelp(h, me);
- for (i = 0; i < nf_conntrack_htable_size; i++) {
+ for (i = 0; i < net->ct.htable_size; i++) {
hlist_nulls_for_each_entry(h, nn, &net->ct.hash[i], hnnode)
unhelp(h, me);
}
rcu_read_lock();
last = (struct nf_conn *)cb->args[1];
- for (; cb->args[0] < nf_conntrack_htable_size; cb->args[0]++) {
+ for (; cb->args[0] < init_net.ct.htable_size; cb->args[0]++) {
restart:
hlist_nulls_for_each_entry_rcu(h, n, &init_net.ct.hash[cb->args[0]],
hnnode) {
struct nlattr *nest_parms;
memset(&m, 0xFF, sizeof(m));
- m.src.u.all = mask->src.u.all;
memcpy(&m.src.u3, &mask->src.u3, sizeof(m.src.u3));
+ m.src.u.all = mask->src.u.all;
+ m.dst.protonum = tuple->dst.protonum;
nest_parms = nla_nest_start(skb, CTA_EXPECT_MASK | NLA_F_NESTED);
if (!nest_parms)
dptr += hdr->len;
else if (hdr->cname && limit - dptr >= hdr->clen + 1 &&
strnicmp(dptr, hdr->cname, hdr->clen) == 0 &&
- !isalpha(*(dptr + hdr->clen + 1)))
+ !isalpha(*(dptr + hdr->clen)))
dptr += hdr->clen;
else
continue;
struct hlist_nulls_node *n;
for (st->bucket = 0;
- st->bucket < nf_conntrack_htable_size;
+ st->bucket < net->ct.htable_size;
st->bucket++) {
n = rcu_dereference(net->ct.hash[st->bucket].first);
if (!is_a_nulls(n))
head = rcu_dereference(head->next);
while (is_a_nulls(head)) {
if (likely(get_nulls_value(head) == st->bucket)) {
- if (++st->bucket >= nf_conntrack_htable_size)
+ if (++st->bucket >= net->ct.htable_size)
return NULL;
}
head = rcu_dereference(net->ct.hash[st->bucket].first);
},
{
.procname = "nf_conntrack_buckets",
- .data = &nf_conntrack_htable_size,
+ .data = &init_net.ct.htable_size,
.maxlen = sizeof(unsigned int),
.mode = 0444,
.proc_handler = proc_dointvec,
goto out_kmemdup;
table[1].data = &net->ct.count;
+ table[2].data = &net->ct.htable_size;
table[3].data = &net->ct.sysctl_checksum;
table[4].data = &net->ct.sysctl_log_invalid;
if (nl_table[protocol].registered &&
try_module_get(nl_table[protocol].module))
module = nl_table[protocol].module;
+ else
+ err = -EPROTONOSUPPORT;
cb_mutex = nl_table[protocol].cb_mutex;
netlink_unlock_table();
+ if (err < 0)
+ goto out;
+
err = __netlink_create(net, sock, cb_mutex, protocol);
if (err < 0)
goto out_module;
module.
To compile this code as a module, choose M here: the
- module will be called police.
+ module will be called act_police.
config NET_ACT_GACT
tristate "Generic actions"
accepting packets.
To compile this code as a module, choose M here: the
- module will be called gact.
+ module will be called act_gact.
config GACT_PROB
bool "Probability support"
other devices.
To compile this code as a module, choose M here: the
- module will be called mirred.
+ module will be called act_mirred.
config NET_ACT_IPT
tristate "IPtables targets"
classification.
To compile this code as a module, choose M here: the
- module will be called ipt.
+ module will be called act_ipt.
config NET_ACT_NAT
tristate "Stateless NAT"
netfilter for NAT unless you know what you are doing.
To compile this code as a module, choose M here: the
- module will be called nat.
+ module will be called act_nat.
config NET_ACT_PEDIT
tristate "Packet Editing"
Say Y here if you want to mangle the content of packets.
To compile this code as a module, choose M here: the
- module will be called pedit.
+ module will be called act_pedit.
config NET_ACT_SIMP
tristate "Simple Example (Debug)"
If unsure, say N.
To compile this code as a module, choose M here: the
- module will be called simple.
+ module will be called act_simple.
config NET_ACT_SKBEDIT
tristate "SKB Editing"
If unsure, say N.
To compile this code as a module, choose M here: the
- module will be called skbedit.
+ module will be called act_skbedit.
config NET_CLS_IND
bool "Incoming device classification"
int err = -ENOMEM;
struct xfrm_state *x = xfrm_state_alloc(net);
if (!x)
- goto error;
+ goto out;
memcpy(&x->id, &orig->id, sizeof(x->id));
memcpy(&x->sel, &orig->sel, sizeof(x->sel));
return x;
error:
+ xfrm_state_put(x);
+out:
if (errp)
*errp = err;
- if (x) {
- kfree(x->aalg);
- kfree(x->ealg);
- kfree(x->calg);
- kfree(x->encap);
- kfree(x->coaddr);
- }
- kfree(x);
return NULL;
}
pnmtologo
bin2c
unifdef
-binoffset
ihex2fw
+++ /dev/null
-/***************************************************************************
- * binoffset.c
- * (C) 2002 Randy Dunlap <rdunlap@xenotime.net>
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-# binoffset.c:
-# - searches a (binary) file for a specified (binary) pattern
-# - returns the offset of the located pattern or ~0 if not found
-# - exits with exit status 0 normally or non-0 if pattern is not found
-# or any other error occurs.
-
-****************************************************************/
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <errno.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/mman.h>
-
-#define VERSION "0.1"
-#define BUF_SIZE (16 * 1024)
-#define PAT_SIZE 100
-
-char *progname;
-char *inputname;
-int inputfd;
-unsigned int bix; /* buf index */
-unsigned char patterns [PAT_SIZE] = {0}; /* byte-sized pattern array */
-int pat_len; /* actual number of pattern bytes */
-unsigned char *madr; /* mmap address */
-size_t filesize;
-int num_matches = 0;
-off_t firstloc = 0;
-
-void usage (void)
-{
- fprintf (stderr, "%s ver. %s\n", progname, VERSION);
- fprintf (stderr, "usage: %s filename pattern_bytes\n",
- progname);
- fprintf (stderr, " [prints location of pattern_bytes in file]\n");
- exit (1);
-}
-
-void get_pattern (int pat_count, char *pats [])
-{
- int ix, err, tmp;
-
-#ifdef DEBUG
- fprintf (stderr,"get_pattern: count = %d\n", pat_count);
- for (ix = 0; ix < pat_count; ix++)
- fprintf (stderr, " pat # %d: [%s]\n", ix, pats[ix]);
-#endif
-
- for (ix = 0; ix < pat_count; ix++) {
- tmp = 0;
- err = sscanf (pats[ix], "%5i", &tmp);
- if (err != 1 || tmp > 0xff) {
- fprintf (stderr, "pattern or value error in pattern # %d [%s]\n",
- ix, pats[ix]);
- usage ();
- }
- patterns [ix] = tmp;
- }
- pat_len = pat_count;
-}
-
-void search_pattern (void)
-{
- for (bix = 0; bix < filesize; bix++) {
- if (madr[bix] == patterns[0]) {
- if (memcmp (&madr[bix], patterns, pat_len) == 0) {
- if (num_matches == 0)
- firstloc = bix;
- num_matches++;
- }
- }
- }
-}
-
-#ifdef NOTDEF
-size_t get_filesize (int fd)
-{
- off_t end_off = lseek (fd, 0, SEEK_END);
- lseek (fd, 0, SEEK_SET);
- return (size_t) end_off;
-}
-#endif
-
-size_t get_filesize (int fd)
-{
- int err;
- struct stat stat;
-
- err = fstat (fd, &stat);
- fprintf (stderr, "filesize: %ld\n", err < 0 ? (long)err : stat.st_size);
- if (err < 0)
- return err;
- return (size_t) stat.st_size;
-}
-
-int main (int argc, char *argv [])
-{
- progname = argv[0];
-
- if (argc < 3)
- usage ();
-
- get_pattern (argc - 2, argv + 2);
-
- inputname = argv[1];
-
- inputfd = open (inputname, O_RDONLY);
- if (inputfd == -1) {
- fprintf (stderr, "%s: cannot open '%s'\n",
- progname, inputname);
- exit (3);
- }
-
- filesize = get_filesize (inputfd);
-
- madr = mmap (0, filesize, PROT_READ, MAP_PRIVATE, inputfd, 0);
- if (madr == MAP_FAILED) {
- fprintf (stderr, "mmap error = %d\n", errno);
- close (inputfd);
- exit (4);
- }
-
- search_pattern ();
-
- if (munmap (madr, filesize))
- fprintf (stderr, "munmap error = %d\n", errno);
-
- if (close (inputfd))
- fprintf (stderr, "%s: error %d closing '%s'\n",
- progname, errno, inputname);
-
- fprintf (stderr, "number of pattern matches = %d\n", num_matches);
- if (num_matches == 0)
- firstloc = ~0;
- printf ("%ld\n", firstloc);
- fprintf (stderr, "%ld\n", firstloc);
-
- exit (num_matches ? 0 : 2);
-}
-
-/* end binoffset.c */
#!/bin/sh
-# extracts .config info from a [b]zImage file
-# uses: binoffset (new), dd, zcat, strings, grep
-# $arg1 is [b]zImage filename
-
-binoffset="./scripts/binoffset"
-test -e $binoffset || cc -o $binoffset ./scripts/binoffset.c || exit 1
-
-IKCFG_ST="0x49 0x4b 0x43 0x46 0x47 0x5f 0x53 0x54"
-IKCFG_ED="0x49 0x4b 0x43 0x46 0x47 0x5f 0x45 0x44"
-dump_config() {
- file="$1"
-
- start=`$binoffset $file $IKCFG_ST 2>/dev/null`
- [ "$?" != "0" ] && start="-1"
- if [ "$start" -eq "-1" ]; then
- return
- fi
- end=`$binoffset $file $IKCFG_ED 2>/dev/null`
- [ "$?" != "0" ] && end="-1"
- if [ "$end" -eq "-1" ]; then
- return
- fi
-
- start=`expr $start + 8`
- size=`expr $end - $start`
-
- dd if="$file" ibs=1 skip="$start" count="$size" 2>/dev/null | zcat
-
- clean_up
- exit 0
-}
-
-
-usage()
-{
- echo " usage: extract-ikconfig [b]zImage_filename"
-}
-
-clean_up()
+# ----------------------------------------------------------------------
+# extract-ikconfig - Extract the .config file from a kernel image
+#
+# This will only work when the kernel was compiled with CONFIG_IKCONFIG.
+#
+# The obscure use of the "tr" filter is to work around older versions of
+# "grep" that report the byte offset of the line instead of the pattern.
+#
+# (c) 2009, Dick Streefland <dick@streefland.net>
+# Licensed under the terms of the GNU General Public License.
+# ----------------------------------------------------------------------
+
+gz1='\037\213\010'
+gz2='01'
+cf1='IKCFG_ST\037\213\010'
+cf2='0123456789'
+
+dump_config()
{
- if [ "$TMPFILE" != "" ]; then
- rm -f $TMPFILE
+ if pos=`tr "$cf1\n$cf2" "\n$cf2=" < "$1" | grep -abo "^$cf2"`
+ then
+ pos=${pos%%:*}
+ tail -c+$(($pos+8)) "$1" | zcat -q
+ exit 0
fi
}
-if [ $# -lt 1 ]
+# Check invocation:
+me=${0##*/}
+img=$1
+if [ $# -ne 1 -o ! -s "$img" ]
then
- usage
- exit 1
+ echo "Usage: $me <kernel-image>" >&2
+ exit 2
fi
-TMPFILE=`mktemp -t ikconfig-XXXXXX` || exit 1
-image="$1"
-
-# vmlinux: Attempt to dump the configuration from the file directly
-dump_config "$image"
-
-GZHDR1="0x1f 0x8b 0x08 0x00"
-GZHDR2="0x1f 0x8b 0x08 0x08"
-
-ELFHDR="0x7f 0x45 0x4c 0x46"
-
-# vmlinux.gz: Check for a compressed images
-off=`$binoffset "$image" $GZHDR1 2>/dev/null`
-[ "$?" != "0" ] && off="-1"
-if [ "$off" -eq "-1" ]; then
- off=`$binoffset "$image" $GZHDR2 2>/dev/null`
- [ "$?" != "0" ] && off="-1"
-fi
-if [ "$off" -eq "0" ]; then
- zcat <"$image" >"$TMPFILE"
- dump_config "$TMPFILE"
-elif [ "$off" -ne "-1" ]; then
- (dd ibs="$off" skip=1 count=0 && dd bs=512k) <"$image" 2>/dev/null | \
- zcat >"$TMPFILE"
- dump_config "$TMPFILE"
-
-# check if this is simply an ELF file
-else
- off=`$binoffset "$image" $ELFHDR 2>/dev/null`
- [ "$?" != "0" ] && off="-1"
- if [ "$off" -eq "0" ]; then
- dump_config "$image"
- fi
-fi
-
-echo "ERROR: Unable to extract kernel configuration information."
-echo " This kernel image may not have the config info."
-
-clean_up
+# Initial attempt for uncompressed images or objects:
+dump_config "$img"
+
+# That didn't work, so decompress and try again:
+tmp=/tmp/ikconfig$$
+trap "rm -f $tmp" 0
+for pos in `tr "$gz1\n$gz2" "\n$gz2=" < "$img" | grep -abo "^$gz2"`
+do
+ pos=${pos%%:*}
+ tail -c+$pos "$img" | zcat 2> /dev/null > $tmp
+ dump_config $tmp
+done
+
+# Bail out:
+echo "$me: Cannot find kernel config." >&2
exit 1
my %VCS_cmds_git = (
"execute_cmd" => \&git_execute_cmd,
"available" => '(which("git") ne "") && (-d ".git")',
- "find_signers_cmd" => "git log --since=\$email_git_since -- \$file",
- "find_commit_signers_cmd" => "git log -1 \$commit",
+ "find_signers_cmd" => "git log --no-color --since=\$email_git_since -- \$file",
+ "find_commit_signers_cmd" => "git log --no-color -1 \$commit",
"blame_range_cmd" => "git blame -l -L \$diff_start,+\$diff_length \$file",
"blame_file_cmd" => "git blame -l \$file",
"commit_pattern" => "^commit [0-9a-f]{40,40}",
$(Q)mkdir -p include/generated
$< -s $(Kconfig)
+# if no path is given, then use src directory to find file
+ifdef LSMOD
+LSMOD_F := $(LSMOD)
+ifeq ($(findstring /,$(LSMOD)),)
+ LSMOD_F := $(objtree)/$(LSMOD)
+endif
+endif
+
localmodconfig: $(obj)/streamline_config.pl $(obj)/conf
- $(Q)perl $< $(srctree) $(Kconfig) > .tmp.config
+ $(Q)mkdir -p include/generated
+ $(Q)perl $< $(srctree) $(Kconfig) $(LSMOD_F) > .tmp.config
$(Q)if [ -f .config ]; then \
cmp -s .tmp.config .config || \
(mv -f .config .config.old.1; \
$(Q)rm -f .tmp.config
localyesconfig: $(obj)/streamline_config.pl $(obj)/conf
- $(Q)perl $< $(srctree) $(Kconfig) > .tmp.config
+ $(Q)mkdir -p include/generated
+ $(Q)perl $< $(srctree) $(Kconfig) $(LSMOD_F) > .tmp.config
$(Q)sed -i s/=m/=y/ .tmp.config
$(Q)if [ -f .config ]; then \
cmp -s .tmp.config .config || \
# Get the build source and top level Kconfig file (passed in)
my $ksource = $ARGV[0];
my $kconfig = $ARGV[1];
+my $lsmod_file = $ARGV[2];
my @makefiles = `find $ksource -name Makefile`;
my %depends;
my %objects;
my $var;
my $cont = 0;
+my $iflevel = 0;
+my @ifdeps;
# prevent recursion
my %read_kconfigs;
$state = "NEW";
$config = $1;
+ for (my $i = 0; $i < $iflevel; $i++) {
+ if ($i) {
+ $depends{$config} .= " " . $ifdeps[$i];
+ } else {
+ $depends{$config} = $ifdeps[$i];
+ }
+ $state = "DEP";
+ }
+
# collect the depends for the config
} elsif ($state eq "NEW" && /^\s*depends\s+on\s+(.*)$/) {
$state = "DEP";
# note if the config has a prompt
$prompt{$config} = 1;
+ # Check for if statements
+ } elsif (/^if\s+(.*\S)\s*$/) {
+ my $deps = $1;
+ # remove beginning and ending non text
+ $deps =~ s/^[^a-zA-Z0-9_]*//;
+ $deps =~ s/[^a-zA-Z0-9_]*$//;
+
+ my @deps = split /[^a-zA-Z0-9_]+/, $deps;
+
+ $ifdeps[$iflevel++] = join ':', @deps;
+
+ } elsif (/^endif/) {
+
+ $iflevel-- if ($iflevel);
+
# stop on "help"
} elsif (/^\s*help\s*$/) {
$state = "NONE";
my %modules;
-# see what modules are loaded on this system
-open(LIN,"/sbin/lsmod|") || die "Cant lsmod";
+if (defined($lsmod_file)) {
+ if ( ! -f $lsmod_file) {
+ die "$lsmod_file not found";
+ }
+ if ( -x $lsmod_file) {
+ # the file is executable, run it
+ open(LIN, "$lsmod_file|");
+ } else {
+ # Just read the contents
+ open(LIN, "$lsmod_file");
+ }
+} else {
+
+ # see what modules are loaded on this system
+ my $lsmod;
+
+ foreach $dir ( ("/sbin", "/bin", "/usr/sbin", "/usr/bin") ) {
+ if ( -x "$dir/lsmod" ) {
+ $lsmod = "$dir/lsmod";
+ last;
+ }
+}
+ if (!defined($lsmod)) {
+ # try just the path
+ $lsmod = "lsmod";
+ }
+
+ open(LIN,"$lsmod|") || die "Can not call lsmod with $lsmod";
+}
+
while (<LIN>) {
next if (/^Module/); # Skip the first line.
if (/^(\S+)/) {
$function = $1;
$func_offset = $2;
}
- if ($line =~ /RIP: 0010:\[\<[0-9a-f]+\>\] \[\<[0-9a-f]+\>\] ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]/) {
+ if ($line =~ /RIP: 0010:\[\<[0-9a-f]+\>\] \[\<[0-9a-f]+\>\] ([a-zA-Z0-9\_]+)\+0x([0-9a-f]+)\/0x[a-f0-9]/) {
$function = $1;
$func_offset = $2;
}
const char *cause, int result, int info);
/* Internal IMA function definitions */
-void ima_iintcache_init(void);
int ima_init(void);
void ima_cleanup(void);
int ima_fs_init(void);
void iint_rcu_free(struct rcu_head *rcu);
/* IMA policy related functions */
-enum ima_hooks { PATH_CHECK = 1, FILE_MMAP, BPRM_CHECK };
+enum ima_hooks { FILE_CHECK = 1, FILE_MMAP, BPRM_CHECK };
int ima_match_policy(struct inode *inode, enum ima_hooks func, int mask);
void ima_init_policy(void);
* ima_must_measure - measure decision based on policy.
* @inode: pointer to inode to measure
* @mask: contains the permission mask (MAY_READ, MAY_WRITE, MAY_EXECUTE)
- * @function: calling function (PATH_CHECK, BPRM_CHECK, FILE_MMAP)
+ * @function: calling function (FILE_CHECK, BPRM_CHECK, FILE_MMAP)
*
* The policy is defined in terms of keypairs:
* subj=, obj=, type=, func=, mask=, fsmagic=
* subj,obj, and type: are LSM specific.
- * func: PATH_CHECK | BPRM_CHECK | FILE_MMAP
+ * func: FILE_CHECK | BPRM_CHECK | FILE_MMAP
* mask: contains the permission mask
* fsmagic: hex value
*
struct ima_iint_cache *iint = NULL;
int rc = 0;
- if (!ima_initialized)
- return 0;
-
iint = kmem_cache_alloc(iint_cache, GFP_NOFS);
if (!iint)
return -ENOMEM;
spin_lock(&ima_iint_lock);
rc = radix_tree_insert(&ima_iint_store, (unsigned long)inode, iint);
spin_unlock(&ima_iint_lock);
+ radix_tree_preload_end();
out:
if (rc < 0)
kmem_cache_free(iint_cache, iint);
- radix_tree_preload_end();
-
return rc;
}
{
struct ima_iint_cache *iint;
- if (!ima_initialized)
- return;
spin_lock(&ima_iint_lock);
iint = radix_tree_delete(&ima_iint_store, (unsigned long)inode);
spin_unlock(&ima_iint_lock);
kref_set(&iint->refcount, 1);
}
-void __init ima_iintcache_init(void)
+static int __init ima_iintcache_init(void)
{
iint_cache =
kmem_cache_create("iint_cache", sizeof(struct ima_iint_cache), 0,
SLAB_PANIC, init_once);
+ return 0;
}
+security_initcall(ima_iintcache_init);
*
* File: ima_main.c
* implements the IMA hooks: ima_bprm_check, ima_file_mmap,
- * and ima_path_check.
+ * and ima_file_check.
*/
#include <linux/module.h>
#include <linux/file.h>
return found;
}
+/* ima_read_write_check - reflect possible reading/writing errors in the PCR.
+ *
+ * When opening a file for read, if the file is already open for write,
+ * the file could change, resulting in a file measurement error.
+ *
+ * Opening a file for write, if the file is already open for read, results
+ * in a time of measure, time of use (ToMToU) error.
+ *
+ * In either case invalidate the PCR.
+ */
+enum iint_pcr_error { TOMTOU, OPEN_WRITERS };
+static void ima_read_write_check(enum iint_pcr_error error,
+ struct ima_iint_cache *iint,
+ struct inode *inode,
+ const unsigned char *filename)
+{
+ switch (error) {
+ case TOMTOU:
+ if (iint->readcount > 0)
+ ima_add_violation(inode, filename, "invalid_pcr",
+ "ToMToU");
+ break;
+ case OPEN_WRITERS:
+ if (iint->writecount > 0)
+ ima_add_violation(inode, filename, "invalid_pcr",
+ "open_writers");
+ break;
+ }
+}
+
/*
* Update the counts given an fmode_t
*/
iint->writecount++;
}
+/*
+ * ima_counts_get - increment file counts
+ *
+ * Maintain read/write counters for all files, but only
+ * invalidate the PCR for measured files:
+ * - Opening a file for write when already open for read,
+ * results in a time of measure, time of use (ToMToU) error.
+ * - Opening a file for read when already open for write,
+ * could result in a file measurement error.
+ *
+ */
+void ima_counts_get(struct file *file)
+{
+ struct dentry *dentry = file->f_path.dentry;
+ struct inode *inode = dentry->d_inode;
+ fmode_t mode = file->f_mode;
+ struct ima_iint_cache *iint;
+ int rc;
+
+ if (!ima_initialized || !S_ISREG(inode->i_mode))
+ return;
+ iint = ima_iint_find_get(inode);
+ if (!iint)
+ return;
+ mutex_lock(&iint->mutex);
+ rc = ima_must_measure(iint, inode, MAY_READ, FILE_CHECK);
+ if (rc < 0)
+ goto out;
+
+ if (mode & FMODE_WRITE) {
+ ima_read_write_check(TOMTOU, iint, inode, dentry->d_name.name);
+ goto out;
+ }
+ ima_read_write_check(OPEN_WRITERS, iint, inode, dentry->d_name.name);
+out:
+ ima_inc_counts(iint, file->f_mode);
+ mutex_unlock(&iint->mutex);
+
+ kref_put(&iint->refcount, iint_free);
+}
+
/*
* Decrement ima counts
*/
kref_put(&iint->refcount, iint_free);
}
-/* ima_read_write_check - reflect possible reading/writing errors in the PCR.
- *
- * When opening a file for read, if the file is already open for write,
- * the file could change, resulting in a file measurement error.
- *
- * Opening a file for write, if the file is already open for read, results
- * in a time of measure, time of use (ToMToU) error.
- *
- * In either case invalidate the PCR.
- */
-enum iint_pcr_error { TOMTOU, OPEN_WRITERS };
-static void ima_read_write_check(enum iint_pcr_error error,
- struct ima_iint_cache *iint,
- struct inode *inode,
- const unsigned char *filename)
-{
- switch (error) {
- case TOMTOU:
- if (iint->readcount > 0)
- ima_add_violation(inode, filename, "invalid_pcr",
- "ToMToU");
- break;
- case OPEN_WRITERS:
- if (iint->writecount > 0)
- ima_add_violation(inode, filename, "invalid_pcr",
- "open_writers");
- break;
- }
-}
-
-static int get_path_measurement(struct ima_iint_cache *iint, struct file *file,
- const unsigned char *filename)
-{
- int rc = 0;
-
- ima_inc_counts(iint, file->f_mode);
-
- rc = ima_collect_measurement(iint, file);
- if (!rc)
- ima_store_measurement(iint, file, filename);
- return rc;
-}
-
-/**
- * ima_path_check - based on policy, collect/store measurement.
- * @path: contains a pointer to the path to be measured
- * @mask: contains MAY_READ, MAY_WRITE or MAY_EXECUTE
- *
- * Measure the file being open for readonly, based on the
- * ima_must_measure() policy decision.
- *
- * Keep read/write counters for all files, but only
- * invalidate the PCR for measured files:
- * - Opening a file for write when already open for read,
- * results in a time of measure, time of use (ToMToU) error.
- * - Opening a file for read when already open for write,
- * could result in a file measurement error.
- *
- * Always return 0 and audit dentry_open failures.
- * (Return code will be based upon measurement appraisal.)
- */
-int ima_path_check(struct path *path, int mask)
-{
- struct inode *inode = path->dentry->d_inode;
- struct ima_iint_cache *iint;
- struct file *file = NULL;
- int rc;
-
- if (!ima_initialized || !S_ISREG(inode->i_mode))
- return 0;
- iint = ima_iint_find_get(inode);
- if (!iint)
- return 0;
-
- mutex_lock(&iint->mutex);
-
- rc = ima_must_measure(iint, inode, MAY_READ, PATH_CHECK);
- if (rc < 0)
- goto out;
-
- if ((mask & MAY_WRITE) || (mask == 0))
- ima_read_write_check(TOMTOU, iint, inode,
- path->dentry->d_name.name);
-
- if ((mask & (MAY_WRITE | MAY_READ | MAY_EXEC)) != MAY_READ)
- goto out;
-
- ima_read_write_check(OPEN_WRITERS, iint, inode,
- path->dentry->d_name.name);
- if (!(iint->flags & IMA_MEASURED)) {
- struct dentry *dentry = dget(path->dentry);
- struct vfsmount *mnt = mntget(path->mnt);
-
- file = dentry_open(dentry, mnt, O_RDONLY | O_LARGEFILE,
- current_cred());
- if (IS_ERR(file)) {
- int audit_info = 0;
-
- integrity_audit_msg(AUDIT_INTEGRITY_PCR, inode,
- dentry->d_name.name,
- "add_measurement",
- "dentry_open failed",
- 1, audit_info);
- file = NULL;
- goto out;
- }
- rc = get_path_measurement(iint, file, dentry->d_name.name);
- }
-out:
- mutex_unlock(&iint->mutex);
- if (file)
- fput(file);
- kref_put(&iint->refcount, iint_free);
- return 0;
-}
-EXPORT_SYMBOL_GPL(ima_path_check);
-
static int process_measurement(struct file *file, const unsigned char *filename,
int mask, int function)
{
return rc;
}
-/*
- * ima_counts_get - increment file counts
- *
- * - for IPC shm and shmat file.
- * - for nfsd exported files.
- *
- * Increment the counts for these files to prevent unnecessary
- * imbalance messages.
- */
-void ima_counts_get(struct file *file)
-{
- struct inode *inode = file->f_dentry->d_inode;
- struct ima_iint_cache *iint;
-
- if (!ima_initialized || !S_ISREG(inode->i_mode))
- return;
- iint = ima_iint_find_get(inode);
- if (!iint)
- return;
- mutex_lock(&iint->mutex);
- ima_inc_counts(iint, file->f_mode);
- mutex_unlock(&iint->mutex);
-
- kref_put(&iint->refcount, iint_free);
-}
-EXPORT_SYMBOL_GPL(ima_counts_get);
-
/**
* ima_file_mmap - based on policy, collect/store measurement.
* @file: pointer to the file to be measured (May be NULL)
return 0;
}
+/**
+ * ima_path_check - based on policy, collect/store measurement.
+ * @file: pointer to the file to be measured
+ * @mask: contains MAY_READ, MAY_WRITE or MAY_EXECUTE
+ *
+ * Measure files based on the ima_must_measure() policy decision.
+ *
+ * Always return 0 and audit dentry_open failures.
+ * (Return code will be based upon measurement appraisal.)
+ */
+int ima_file_check(struct file *file, int mask)
+{
+ int rc;
+
+ rc = process_measurement(file, file->f_dentry->d_name.name,
+ mask & (MAY_READ | MAY_WRITE | MAY_EXEC),
+ FILE_CHECK);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ima_file_check);
+
static int __init init_ima(void)
{
int error;
- ima_iintcache_init();
error = ima_init();
ima_initialized = 1;
return error;
.flags = IMA_FUNC | IMA_MASK},
{.action = MEASURE,.func = BPRM_CHECK,.mask = MAY_EXEC,
.flags = IMA_FUNC | IMA_MASK},
- {.action = MEASURE,.func = PATH_CHECK,.mask = MAY_READ,.uid = 0,
+ {.action = MEASURE,.func = FILE_CHECK,.mask = MAY_READ,.uid = 0,
.flags = IMA_FUNC | IMA_MASK | IMA_UID},
};
break;
case Opt_func:
audit_log_format(ab, "func=%s ", args[0].from);
- if (strcmp(args[0].from, "PATH_CHECK") == 0)
- entry->func = PATH_CHECK;
+ if (strcmp(args[0].from, "FILE_CHECK") == 0)
+ entry->func = FILE_CHECK;
+ /* PATH_CHECK is for backwards compat */
+ else if (strcmp(args[0].from, "PATH_CHECK") == 0)
+ entry->func = FILE_CHECK;
else if (strcmp(args[0].from, "FILE_MMAP") == 0)
entry->func = FILE_MMAP;
else if (strcmp(args[0].from, "BPRM_CHECK") == 0)
void security_file_free(struct file *file)
{
security_ops->file_free_security(file);
- if (file->f_dentry)
- ima_file_free(file);
}
int security_file_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
cmap_idx = delta / NETLBL_CATMAP_MAPSIZE;
cmap_sft = delta % NETLBL_CATMAP_MAPSIZE;
c_iter->bitmap[cmap_idx]
- |= e_iter->maps[cmap_idx] << cmap_sft;
+ |= e_iter->maps[i] << cmap_sft;
}
e_iter = e_iter->next;
}
static unsigned long atc_get_ptp_phys(struct ct_atc *atc, int index)
{
- struct ct_vm *vm;
- void *kvirt_addr;
- unsigned long phys_addr;
-
- vm = atc->vm;
- kvirt_addr = vm->get_ptp_virt(vm, index);
- if (kvirt_addr == NULL)
- phys_addr = (~0UL);
- else
- phys_addr = virt_to_phys(kvirt_addr);
-
- return phys_addr;
+ return atc->vm->get_ptp_phys(atc->vm, index);
}
static unsigned int convert_format(snd_pcm_format_t snd_format)
}
/* Set up device virtual memory management object */
- err = ct_vm_create(&atc->vm);
+ err = ct_vm_create(&atc->vm, pci);
if (err < 0)
goto error1;
return NULL;
}
- ptp = vm->ptp[0];
+ ptp = (unsigned long *)vm->ptp[0].area;
pte_start = (block->addr >> CT_PAGE_SHIFT);
pages = block->size >> CT_PAGE_SHIFT;
for (i = 0; i < pages; i++) {
}
/* *
- * return the host (kmalloced) addr of the @index-th device
- * page talbe page on success, or NULL on failure.
- * The first returned NULL indicates the termination.
+ * return the host physical addr of the @index-th device
+ * page table page on success, or ~0UL on failure.
+ * The first returned ~0UL indicates the termination.
* */
-static void *
-ct_get_ptp_virt(struct ct_vm *vm, int index)
+static dma_addr_t
+ct_get_ptp_phys(struct ct_vm *vm, int index)
{
- void *addr;
+ dma_addr_t addr;
- addr = (index >= CT_PTP_NUM) ? NULL : vm->ptp[index];
+ addr = (index >= CT_PTP_NUM) ? ~0UL : vm->ptp[index].addr;
return addr;
}
-int ct_vm_create(struct ct_vm **rvm)
+int ct_vm_create(struct ct_vm **rvm, struct pci_dev *pci)
{
struct ct_vm *vm;
struct ct_vm_block *block;
- int i;
+ int i, err = 0;
*rvm = NULL;
/* Allocate page table pages */
for (i = 0; i < CT_PTP_NUM; i++) {
- vm->ptp[i] = kmalloc(PAGE_SIZE, GFP_KERNEL);
- if (!vm->ptp[i])
+ err = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV,
+ snd_dma_pci_data(pci),
+ PAGE_SIZE, &vm->ptp[i]);
+ if (err < 0)
break;
}
- if (!i) {
+ if (err < 0) {
/* no page table pages are allocated */
- kfree(vm);
+ ct_vm_destroy(vm);
return -ENOMEM;
}
vm->size = CT_ADDRS_PER_PAGE * i;
- /* Initialise remaining ptps */
- for (; i < CT_PTP_NUM; i++)
- vm->ptp[i] = NULL;
-
vm->map = ct_vm_map;
vm->unmap = ct_vm_unmap;
- vm->get_ptp_virt = ct_get_ptp_virt;
+ vm->get_ptp_phys = ct_get_ptp_phys;
INIT_LIST_HEAD(&vm->unused);
INIT_LIST_HEAD(&vm->used);
block = kzalloc(sizeof(*block), GFP_KERNEL);
/* free allocated page table pages */
for (i = 0; i < CT_PTP_NUM; i++)
- kfree(vm->ptp[i]);
+ snd_dma_free_pages(&vm->ptp[i]);
vm->size = 0;
#include <linux/mutex.h>
#include <linux/list.h>
+#include <linux/pci.h>
+#include <sound/memalloc.h>
/* The chip can handle the page table of 4k pages
* (emu20k1 can handle even 8k pages, but we don't use it right now)
/* Virtual memory management object for card device */
struct ct_vm {
- void *ptp[CT_PTP_NUM]; /* Device page table pages */
+ struct snd_dma_buffer ptp[CT_PTP_NUM]; /* Device page table pages */
unsigned int size; /* Available addr space in bytes */
struct list_head unused; /* List of unused blocks */
struct list_head used; /* List of used blocks */
int size);
/* Unmap device logical addr area. */
void (*unmap)(struct ct_vm *, struct ct_vm_block *block);
- void *(*get_ptp_virt)(struct ct_vm *vm, int index);
+ dma_addr_t (*get_ptp_phys)(struct ct_vm *vm, int index);
};
-int ct_vm_create(struct ct_vm **rvm);
+int ct_vm_create(struct ct_vm **rvm, struct pci_dev *pci);
void ct_vm_destroy(struct ct_vm *vm);
#endif /* CTVMEM_H */
/* flags */
int position_fix;
+ int poll_count;
unsigned int running :1;
unsigned int initialized :1;
unsigned int single_cmd :1;
#define get_azx_dev(substream) (substream->runtime->private_data)
static int azx_acquire_irq(struct azx *chip, int do_disconnect);
-
+static int azx_send_cmd(struct hda_bus *bus, unsigned int val);
/*
* Interface for HD codec
*/
{
struct azx *chip = bus->private_data;
unsigned long timeout;
+ int do_poll = 0;
again:
timeout = jiffies + msecs_to_jiffies(1000);
for (;;) {
- if (chip->polling_mode) {
+ if (chip->polling_mode || do_poll) {
spin_lock_irq(&chip->reg_lock);
azx_update_rirb(chip);
spin_unlock_irq(&chip->reg_lock);
if (!chip->rirb.cmds[addr]) {
smp_rmb();
bus->rirb_error = 0;
+
+ if (!do_poll)
+ chip->poll_count = 0;
return chip->rirb.res[addr]; /* the last value */
}
if (time_after(jiffies, timeout))
}
}
+ if (!chip->polling_mode && chip->poll_count < 2) {
+ snd_printdd(SFX "azx_get_response timeout, "
+ "polling the codec once: last cmd=0x%08x\n",
+ chip->last_cmd[addr]);
+ do_poll = 1;
+ chip->poll_count++;
+ goto again;
+ }
+
+
if (!chip->polling_mode) {
snd_printk(KERN_WARNING SFX "azx_get_response timeout, "
"switching to polling mode: last cmd=0x%08x\n",
if (!bdl_pos_adj[chip->dev_index])
return 1; /* no delayed ack */
+ if (WARN_ONCE(!azx_dev->period_bytes,
+ "hda-intel: zero azx_dev->period_bytes"))
+ return 0; /* this shouldn't happen! */
if (pos % azx_dev->period_bytes > azx_dev->period_bytes / 2)
return 0; /* NG - it's below the period boundary */
return 1; /* OK, it's fine */
{
if (request_irq(chip->pci->irq, azx_interrupt,
chip->msi ? 0 : IRQF_SHARED,
- "HDA Intel", chip)) {
+ "hda_intel", chip)) {
printk(KERN_ERR "hda-intel: unable to grab IRQ %d, "
"disabling device\n", chip->pci->irq);
if (do_disconnect)
*/
static struct snd_pci_quirk msi_black_list[] __devinitdata = {
SND_PCI_QUIRK(0x1043, 0x81f2, "ASUS", 0), /* Athlon64 X2 + nvidia */
+ SND_PCI_QUIRK(0x1043, 0x81f6, "ASUS", 0), /* nvidia */
{}
};
{
unsigned char nvol;
- if ((master & WM_VOL_MUTE) || (vol & WM_VOL_MUTE))
+ if ((master & WM_VOL_MUTE) || (vol & WM_VOL_MUTE)) {
nvol = 0;
- else
+ } else {
nvol = ((vol % WM_VOL_CNT) * (master % WM_VOL_CNT)) /
WM_VOL_MAX;
+ nvol += 0x1b;
+ }
wm_put(ice, index, nvol);
wm_put_nocache(ice, index, 0x180 | nvol);
for (ch = 0; ch < 2; ch++) {
unsigned int vol = ucontrol->value.integer.value[ch];
if (vol > WM_VOL_MAX)
- continue;
+ vol = WM_VOL_MAX;
vol |= spec->master[ch] & WM_VOL_MUTE;
if (vol != spec->master[ch]) {
int dac;
for (i = 0; i < voices; i++) {
unsigned int vol = ucontrol->value.integer.value[i];
if (vol > WM_VOL_MAX)
- continue;
- vol |= spec->vol[ofs+i];
+ vol = WM_VOL_MAX;
+ vol |= spec->vol[ofs+i] & WM_VOL_MUTE;
if (vol != spec->vol[ofs+i]) {
spec->vol[ofs+i] = vol;
idx = WM_DAC_ATTEN + ofs + i;
u16 reg;
/* Sync reg_cache with the hardware */
- for (reg = 0; reg < TLV320AIC23_RESET; reg++) {
+ for (reg = 0; reg <= TLV320AIC23_ACTIVE; reg++) {
u16 val = tlv320aic23_read_reg_cache(codec, reg);
tlv320aic23_write(codec, reg, val);
}
obj-$(CONFIG_SND_OMAP_SOC_OVERO) += snd-soc-overo.o
obj-$(CONFIG_SND_OMAP_SOC_OMAP2EVM) += snd-soc-omap2evm.o
obj-$(CONFIG_SND_OMAP_SOC_OMAP3EVM) += snd-soc-omap3evm.o
-obj-$(CONFIG_SND_OMAP_SOC_OMAP3517EVM) += snd-soc-am3517evm.o
+obj-$(CONFIG_SND_OMAP_SOC_AM3517EVM) += snd-soc-am3517evm.o
obj-$(CONFIG_SND_OMAP_SOC_SDP3430) += snd-soc-sdp3430.o
obj-$(CONFIG_SND_OMAP_SOC_OMAP3_PANDORA) += snd-soc-omap3pandora.o
obj-$(CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE) += snd-soc-omap3beagle.o
};
static const struct snd_soc_dapm_route omap3pandora_out_map[] = {
+ {"PCM DAC", NULL, "APLL Enable"},
{"Headphone Amplifier", NULL, "PCM DAC"},
{"Line Out", NULL, "PCM DAC"},
{"Headphone Jack", NULL, "Headphone Amplifier"},
perf*.html
common-cmds.h
perf.data
+perf.data.old
tags
TAGS
cscope*
else if (!strncmp(tok, "none", strlen(arg))) {
callchain_param.mode = CHAIN_NONE;
- symbol_conf.use_callchain = true;
+ symbol_conf.use_callchain = false;
return 0;
}
fprintf(stdout, "\t[w] toggle display weighted/count[E]r. \t(%d)\n", display_weighted ? 1 : 0);
fprintf(stdout,
- "\t[K] hide kernel_symbols symbols. \t(%s)\n",
+ "\t[K] hide kernel_symbols symbols. \t(%s)\n",
hide_kernel_symbols ? "yes" : "no");
fprintf(stdout,
"\t[U] hide user symbols. \t(%s)\n",
al->thread = self;
al->addr = addr;
- if (cpumode & PERF_RECORD_MISC_KERNEL) {
+ if (cpumode == PERF_RECORD_MISC_KERNEL) {
al->level = 'k';
mg = &session->kmaps;
- } else if (cpumode & PERF_RECORD_MISC_USER)
+ } else if (cpumode == PERF_RECORD_MISC_USER)
al->level = '.';
else {
al->level = 'H';
int ret;
pp->probes[0] = buf = zalloc(MAX_CMDLEN);
+ pp->found = 1;
if (!buf)
die("Failed to allocate memory by zalloc.");
if (pp->offset) {
error:
free(pp->probes[0]);
pp->probes[0] = NULL;
+ pp->found = 0;
}
return ret;
}
struct strlist *rawlist;
struct str_node *ent;
+ memset(&pp, 0, sizeof(pp));
fd = open_kprobe_events(O_RDONLY, 0);
rawlist = get_trace_kprobe_event_rawlist(fd);
close(fd);
projects / linux-beck.git / commitdiff