mach-mx5: fix the I2C clock parents

The clock from which the I2C timing is derived is the ipg_perclk not ipg_clk.

I2C bus frequency was lower by a factor of ~8 due to the clock divider
calculation being based on 66.5MHz IPG clock while the bus actually
uses 8MHz ipg_perclk.

Kernel version: 3.0.0-rc2 branch 'imx-for-next' of git://git.pengutronix.de/git/imx/linux-2.6

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
index 699b0d29e364fbe59ef34b63ef00f6bc2ed53c0f..ff16d86ff59744aaa39a7010b9a174058c1852d9 100644 (file)
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
@@ -1282,13 +1282,13 @@ DEFINE_CLOCK(pwm2_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG8_OFFSET,
 
 /* I2C */
 DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG9_OFFSET,
-       NULL, NULL, &ipg_clk, NULL);
+       NULL, NULL, &ipg_perclk, NULL);
 DEFINE_CLOCK(i2c2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG10_OFFSET,
-       NULL, NULL, &ipg_clk, NULL);
+       NULL, NULL, &ipg_perclk, NULL);
 DEFINE_CLOCK(hsi2c_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET,
        NULL, NULL, &ipg_clk, NULL);
 DEFINE_CLOCK(i2c3_mx53_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET,
-       NULL, NULL, &ipg_clk, NULL);
+       NULL, NULL, &ipg_perclk, NULL);
 
 /* FEC */
 DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET,