]> git.karo-electronics.de Git - linux-beck.git/commitdiff
mfd: Remove obsolete hwacc implementation for db8500-prmcu
authorMattias Nilsson <mattias.i.nilsson@stericsson.com>
Thu, 15 Mar 2012 18:50:26 +0000 (19:50 +0100)
committerSamuel Ortiz <sameo@linux.intel.com>
Fri, 16 Mar 2012 19:58:39 +0000 (20:58 +0100)
This patch removes the obsolete hwacc implementation in the
DB8500 PRCMU driver.

Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
drivers/mfd/db8500-prcmu.c
include/linux/mfd/db8500-prcmu.h

index 6e5a0a09c41a46ab3f606bf595eca4637c3d992f..09fd6a39d7fa4626d198e41f0744f0a0a2dbee63 100644 (file)
@@ -516,35 +516,6 @@ static struct dsiescclk dsiescclk[3] = {
        }
 };
 
-static struct regulator *hwacc_regulator[NUM_HW_ACC];
-static struct regulator *hwacc_ret_regulator[NUM_HW_ACC];
-
-static bool hwacc_enabled[NUM_HW_ACC];
-static bool hwacc_ret_enabled[NUM_HW_ACC];
-
-static const char *hwacc_regulator_name[NUM_HW_ACC] = {
-       [HW_ACC_SVAMMDSP]       = "hwacc-sva-mmdsp",
-       [HW_ACC_SVAPIPE]        = "hwacc-sva-pipe",
-       [HW_ACC_SIAMMDSP]       = "hwacc-sia-mmdsp",
-       [HW_ACC_SIAPIPE]        = "hwacc-sia-pipe",
-       [HW_ACC_SGA]            = "hwacc-sga",
-       [HW_ACC_B2R2]           = "hwacc-b2r2",
-       [HW_ACC_MCDE]           = "hwacc-mcde",
-       [HW_ACC_ESRAM1]         = "hwacc-esram1",
-       [HW_ACC_ESRAM2]         = "hwacc-esram2",
-       [HW_ACC_ESRAM3]         = "hwacc-esram3",
-       [HW_ACC_ESRAM4]         = "hwacc-esram4",
-};
-
-static const char *hwacc_ret_regulator_name[NUM_HW_ACC] = {
-       [HW_ACC_SVAMMDSP]       = "hwacc-sva-mmdsp-ret",
-       [HW_ACC_SIAMMDSP]       = "hwacc-sia-mmdsp-ret",
-       [HW_ACC_ESRAM1]         = "hwacc-esram1-ret",
-       [HW_ACC_ESRAM2]         = "hwacc-esram2-ret",
-       [HW_ACC_ESRAM3]         = "hwacc-esram3-ret",
-       [HW_ACC_ESRAM4]         = "hwacc-esram4-ret",
-};
-
 /*
 * Used by MCDE to setup all necessary PRCMU registers
 */
@@ -1294,132 +1265,6 @@ static int request_pll(u8 clock, bool enable)
        return r;
 }
 
-/**
- * prcmu_set_hwacc - set the power state of a h/w accelerator
- * @hwacc_dev: The hardware accelerator (enum hw_acc_dev).
- * @state: The new power state (enum hw_acc_state).
- *
- * This function sets the power state of a hardware accelerator.
- * This function should not be called from interrupt context.
- *
- * NOTE! Deprecated, to be removed when all users switched over to use the
- * regulator framework API.
- */
-int prcmu_set_hwacc(u16 hwacc_dev, u8 state)
-{
-       int r = 0;
-       bool ram_retention = false;
-       bool enable, enable_ret;
-
-       /* check argument */
-       BUG_ON(hwacc_dev >= NUM_HW_ACC);
-
-       /* get state of switches */
-       enable = hwacc_enabled[hwacc_dev];
-       enable_ret = hwacc_ret_enabled[hwacc_dev];
-
-       /* set flag if retention is possible */
-       switch (hwacc_dev) {
-       case HW_ACC_SVAMMDSP:
-       case HW_ACC_SIAMMDSP:
-       case HW_ACC_ESRAM1:
-       case HW_ACC_ESRAM2:
-       case HW_ACC_ESRAM3:
-       case HW_ACC_ESRAM4:
-               ram_retention = true;
-               break;
-       }
-
-       /* check argument */
-       BUG_ON(state > HW_ON);
-       BUG_ON(state == HW_OFF_RAMRET && !ram_retention);
-
-       /* modify enable flags */
-       switch (state) {
-       case HW_OFF:
-               enable_ret = false;
-               enable = false;
-               break;
-       case HW_ON:
-               enable = true;
-               break;
-       case HW_OFF_RAMRET:
-               enable_ret = true;
-               enable = false;
-               break;
-       }
-
-       /* get regulator (lazy) */
-       if (hwacc_regulator[hwacc_dev] == NULL) {
-               hwacc_regulator[hwacc_dev] = regulator_get(NULL,
-                       hwacc_regulator_name[hwacc_dev]);
-               if (IS_ERR(hwacc_regulator[hwacc_dev])) {
-                       pr_err("prcmu: failed to get supply %s\n",
-                               hwacc_regulator_name[hwacc_dev]);
-                       r = PTR_ERR(hwacc_regulator[hwacc_dev]);
-                       goto out;
-               }
-       }
-
-       if (ram_retention) {
-               if (hwacc_ret_regulator[hwacc_dev] == NULL) {
-                       hwacc_ret_regulator[hwacc_dev] = regulator_get(NULL,
-                               hwacc_ret_regulator_name[hwacc_dev]);
-                       if (IS_ERR(hwacc_ret_regulator[hwacc_dev])) {
-                               pr_err("prcmu: failed to get supply %s\n",
-                                       hwacc_ret_regulator_name[hwacc_dev]);
-                               r = PTR_ERR(hwacc_ret_regulator[hwacc_dev]);
-                               goto out;
-                       }
-               }
-       }
-
-       /* set regulators */
-       if (ram_retention) {
-               if (enable_ret && !hwacc_ret_enabled[hwacc_dev]) {
-                       r = regulator_enable(hwacc_ret_regulator[hwacc_dev]);
-                       if (r < 0) {
-                               pr_err("prcmu_set_hwacc: ret enable failed\n");
-                               goto out;
-                       }
-                       hwacc_ret_enabled[hwacc_dev] = true;
-               }
-       }
-
-       if (enable && !hwacc_enabled[hwacc_dev]) {
-               r = regulator_enable(hwacc_regulator[hwacc_dev]);
-               if (r < 0) {
-                       pr_err("prcmu_set_hwacc: enable failed\n");
-                       goto out;
-               }
-               hwacc_enabled[hwacc_dev] = true;
-       }
-
-       if (!enable && hwacc_enabled[hwacc_dev]) {
-               r = regulator_disable(hwacc_regulator[hwacc_dev]);
-               if (r < 0) {
-                       pr_err("prcmu_set_hwacc: disable failed\n");
-                       goto out;
-               }
-               hwacc_enabled[hwacc_dev] = false;
-       }
-
-       if (ram_retention) {
-               if (!enable_ret && hwacc_ret_enabled[hwacc_dev]) {
-                       r = regulator_disable(hwacc_ret_regulator[hwacc_dev]);
-                       if (r < 0) {
-                               pr_err("prcmu_set_hwacc: ret disable failed\n");
-                               goto out;
-                       }
-                       hwacc_ret_enabled[hwacc_dev] = false;
-               }
-       }
-
-out:
-       return r;
-}
-EXPORT_SYMBOL(prcmu_set_hwacc);
-
 /**
  * db8500_prcmu_set_epod - set the state of a EPOD (power domain)
  * @epod_id: The EPOD to set
index 048a534fde3883218e6c220e0f8af65c76f13606..a220905337b5985e97328c69182c9c24089e42dc 100644 (file)
@@ -438,43 +438,6 @@ enum auto_enable {
 
 /* End of file previously known as prcmu-fw-defs_v1.h */
 
-/**
- * enum hw_acc_dev - enum for hw accelerators
- * @HW_ACC_SVAMMDSP: for SVAMMDSP
- * @HW_ACC_SVAPIPE:  for SVAPIPE
- * @HW_ACC_SIAMMDSP: for SIAMMDSP
- * @HW_ACC_SIAPIPE: for SIAPIPE
- * @HW_ACC_SGA: for SGA
- * @HW_ACC_B2R2: for B2R2
- * @HW_ACC_MCDE: for MCDE
- * @HW_ACC_ESRAM1: for ESRAM1
- * @HW_ACC_ESRAM2: for ESRAM2
- * @HW_ACC_ESRAM3: for ESRAM3
- * @HW_ACC_ESRAM4: for ESRAM4
- * @NUM_HW_ACC: number of hardware accelerators
- *
- * Different hw accelerators which can be turned ON/
- * OFF or put into retention (MMDSPs and ESRAMs).
- * Used with EPOD API.
- *
- * NOTE! Deprecated, to be removed when all users switched over to use the
- * regulator API.
- */
-enum hw_acc_dev {
-       HW_ACC_SVAMMDSP,
-       HW_ACC_SVAPIPE,
-       HW_ACC_SIAMMDSP,
-       HW_ACC_SIAPIPE,
-       HW_ACC_SGA,
-       HW_ACC_B2R2,
-       HW_ACC_MCDE,
-       HW_ACC_ESRAM1,
-       HW_ACC_ESRAM2,
-       HW_ACC_ESRAM3,
-       HW_ACC_ESRAM4,
-       NUM_HW_ACC
-};
-
 /**
  * enum prcmu_power_status - results from set_power_state
  * @PRCMU_SLEEP_OK: Sleep went ok
@@ -552,8 +515,6 @@ bool prcmu_has_arm_maxopp(void);
 struct prcmu_fw_version *prcmu_get_fw_version(void);
 int prcmu_request_ape_opp_100_voltage(bool enable);
 int prcmu_release_usb_wakeup_state(void);
-/* NOTE! Use regulator framework instead */
-int prcmu_set_hwacc(u16 hw_acc_dev, u8 state);
 void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep,
        struct prcmu_auto_pm_config *idle);
 bool prcmu_is_auto_pm_enabled(void);
@@ -667,10 +628,6 @@ static inline int db8500_prcmu_get_ddr_opp(void)
        return DDR_100_OPP;
 }
 
-static inline int prcmu_set_hwacc(u16 hw_acc_dev, u8 state)
-{
-       return 0;
-}
 static inline void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep,
        struct prcmu_auto_pm_config *idle)
 {