.map_io = footbridge_map_io,
.init_irq = footbridge_init_irq,
.timer = &isa_timer,
+ .restart = footbridge_restart,
MACHINE_END
iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc));
}
+void footbridge_restart(char mode, const char *cmd)
+{
+ if (mode == 's') {
+ /* Jump into the ROM */
+ soft_restart(0x41000000);
+ } else {
+ /*
+ * Force the watchdog to do a CPU reset.
+ *
+ * After making sure that the watchdog is disabled
+ * (so we can change the timer registers) we first
+ * enable the timer to autoreload itself. Next, the
+ * timer interval is set really short and any
+ * current interrupt request is cleared (so we can
+ * see an edge transition). Finally, TIMER4 is
+ * enabled as the watchdog.
+ */
+ *CSR_SA110_CNTL &= ~(1 << 13);
+ *CSR_TIMER4_CNTL = TIMER_CNTL_ENABLE |
+ TIMER_CNTL_AUTORELOAD |
+ TIMER_CNTL_DIV16;
+ *CSR_TIMER4_LOAD = 0x2;
+ *CSR_TIMER4_CLR = 0;
+ *CSR_SA110_CNTL |= (1 << 13);
+ }
+}
+
#ifdef CONFIG_FOOTBRIDGE_ADDIN
static inline unsigned long fb_bus_sdram_offset(void)
extern void footbridge_init_irq(void);
extern void isa_init_irq(unsigned int irq);
+extern void footbridge_restart(char, const char *);
.map_io = footbridge_map_io,
.init_irq = footbridge_init_irq,
.timer = &footbridge_timer,
+ .restart = footbridge_restart,
MACHINE_END
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <linux/io.h>
-#include <asm/hardware/dec21285.h>
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
static inline void arch_idle(void)
{
cpu_do_idle();
static inline void arch_reset(char mode, const char *cmd)
{
- if (mode == 's') {
- /*
- * Jump into the ROM
- */
- soft_restart(0x41000000);
- } else {
- if (machine_is_netwinder()) {
- /* open up the SuperIO chip
- */
- outb(0x87, 0x370);
- outb(0x87, 0x370);
-
- /* aux function group 1 (logical device 7)
- */
- outb(0x07, 0x370);
- outb(0x07, 0x371);
-
- /* set GP16 for WD-TIMER output
- */
- outb(0xe6, 0x370);
- outb(0x00, 0x371);
-
- /* set a RED LED and toggle WD_TIMER for rebooting
- */
- outb(0xc4, 0x338);
- } else {
- /*
- * Force the watchdog to do a CPU reset.
- *
- * After making sure that the watchdog is disabled
- * (so we can change the timer registers) we first
- * enable the timer to autoreload itself. Next, the
- * timer interval is set really short and any
- * current interrupt request is cleared (so we can
- * see an edge transition). Finally, TIMER4 is
- * enabled as the watchdog.
- */
- *CSR_SA110_CNTL &= ~(1 << 13);
- *CSR_TIMER4_CNTL = TIMER_CNTL_ENABLE |
- TIMER_CNTL_AUTORELOAD |
- TIMER_CNTL_DIV16;
- *CSR_TIMER4_LOAD = 0x2;
- *CSR_TIMER4_CLR = 0;
- *CSR_SA110_CNTL |= (1 << 13);
- }
- }
}
#endif
}
+static void netwinder_restart(char mode, const char *cmd)
+{
+ if (mode == 's') {
+ /* Jump into the ROM */
+ soft_restart(0x41000000);
+ } else {
+ local_irq_disable();
+ local_fiq_disable();
+
+ /* open up the SuperIO chip */
+ outb(0x87, 0x370);
+ outb(0x87, 0x370);
+
+ /* aux function group 1 (logical device 7) */
+ outb(0x07, 0x370);
+ outb(0x07, 0x371);
+
+ /* set GP16 for WD-TIMER output */
+ outb(0xe6, 0x370);
+ outb(0x00, 0x371);
+
+ /* set a RED LED and toggle WD_TIMER for rebooting */
+ outb(0xc4, 0x338);
+ }
+}
+
MACHINE_START(NETWINDER, "Rebel-NetWinder")
/* Maintainer: Russell King/Rebel.com */
.atag_offset = 0x100,
.map_io = footbridge_map_io,
.init_irq = footbridge_init_irq,
.timer = &isa_timer,
+ .restart = netwinder_restart,
MACHINE_END
.map_io = footbridge_map_io,
.init_irq = footbridge_init_irq,
.timer = &footbridge_timer,
+ .restart = footbridge_restart,
MACHINE_END