#define VERSION "1.0"
+#define ATH3K_DNLOAD 0x01
+#define ATH3K_GETSTATE 0x05
+#define ATH3K_SET_NORMAL_MODE 0x07
+#define ATH3K_GETVERSION 0x09
+#define USB_REG_SWITCH_VID_PID 0x0a
+
+#define ATH3K_MODE_MASK 0x3F
+#define ATH3K_NORMAL_MODE 0x0E
+
+#define ATH3K_PATCH_UPDATE 0x80
+#define ATH3K_SYSCFG_UPDATE 0x40
+
+#define ATH3K_XTAL_FREQ_26M 0x00
+#define ATH3K_XTAL_FREQ_40M 0x01
+#define ATH3K_XTAL_FREQ_19P2 0x02
+#define ATH3K_NAME_LEN 0xFF
+
+struct ath3k_version {
+ unsigned int rom_version;
+ unsigned int build_version;
+ unsigned int ram_version;
+ unsigned char ref_clock;
+ unsigned char reserved[0x07];
+};
static struct usb_device_id ath3k_table[] = {
/* Atheros AR3011 */
/* Atheros AR9285 Malbec with sflash firmware */
{ USB_DEVICE(0x03F0, 0x311D) },
+
+ /* Atheros AR3012 with sflash firmware*/
+ { USB_DEVICE(0x0CF3, 0x3004) },
+
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, ath3k_table);
+#define BTUSB_ATH3012 0x80
+/* This table is to load patch and sysconfig files
+ * for AR3012 */
+static struct usb_device_id ath3k_blist_tbl[] = {
+
+ /* Atheros AR3012 with sflash firmware*/
+ { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
+
+ { } /* Terminating entry */
+};
+
#define USB_REQ_DFU_DNLOAD 1
#define BULK_SIZE 4096
+#define FW_HDR_SIZE 20
static int ath3k_load_firmware(struct usb_device *udev,
const struct firmware *firmware)
return err;
}
+static int ath3k_get_state(struct usb_device *udev, unsigned char *state)
+{
+ int pipe = 0;
+
+ pipe = usb_rcvctrlpipe(udev, 0);
+ return usb_control_msg(udev, pipe, ATH3K_GETSTATE,
+ USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
+ state, 0x01, USB_CTRL_SET_TIMEOUT);
+}
+
+static int ath3k_get_version(struct usb_device *udev,
+ struct ath3k_version *version)
+{
+ int pipe = 0;
+
+ pipe = usb_rcvctrlpipe(udev, 0);
+ return usb_control_msg(udev, pipe, ATH3K_GETVERSION,
+ USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, version,
+ sizeof(struct ath3k_version),
+ USB_CTRL_SET_TIMEOUT);
+}
+
+static int ath3k_load_fwfile(struct usb_device *udev,
+ const struct firmware *firmware)
+{
+ u8 *send_buf;
+ int err, pipe, len, size, count, sent = 0;
+ int ret;
+
+ count = firmware->size;
+
+ send_buf = kmalloc(BULK_SIZE, GFP_ATOMIC);
+ if (!send_buf) {
+ BT_ERR("Can't allocate memory chunk for firmware");
+ return -ENOMEM;
+ }
+
+ size = min_t(uint, count, FW_HDR_SIZE);
+ memcpy(send_buf, firmware->data, size);
+
+ pipe = usb_sndctrlpipe(udev, 0);
+ ret = usb_control_msg(udev, pipe, ATH3K_DNLOAD,
+ USB_TYPE_VENDOR, 0, 0, send_buf,
+ size, USB_CTRL_SET_TIMEOUT);
+ if (ret < 0) {
+ BT_ERR("Can't change to loading configuration err");
+ kfree(send_buf);
+ return ret;
+ }
+
+ sent += size;
+ count -= size;
+
+ while (count) {
+ size = min_t(uint, count, BULK_SIZE);
+ pipe = usb_sndbulkpipe(udev, 0x02);
+
+ memcpy(send_buf, firmware->data + sent, size);
+
+ err = usb_bulk_msg(udev, pipe, send_buf, size,
+ &len, 3000);
+ if (err || (len != size)) {
+ BT_ERR("Error in firmware loading err = %d,"
+ "len = %d, size = %d", err, len, size);
+ kfree(send_buf);
+ return err;
+ }
+ sent += size;
+ count -= size;
+ }
+
+ kfree(send_buf);
+ return 0;
+}
+
+static int ath3k_switch_pid(struct usb_device *udev)
+{
+ int pipe = 0;
+
+ pipe = usb_sndctrlpipe(udev, 0);
+ return usb_control_msg(udev, pipe, USB_REG_SWITCH_VID_PID,
+ USB_TYPE_VENDOR, 0, 0,
+ NULL, 0, USB_CTRL_SET_TIMEOUT);
+}
+
+static int ath3k_set_normal_mode(struct usb_device *udev)
+{
+ unsigned char fw_state;
+ int pipe = 0, ret;
+
+ ret = ath3k_get_state(udev, &fw_state);
+ if (ret < 0) {
+ BT_ERR("Can't get state to change to normal mode err");
+ return ret;
+ }
+
+ if ((fw_state & ATH3K_MODE_MASK) == ATH3K_NORMAL_MODE) {
+ BT_DBG("firmware was already in normal mode");
+ return 0;
+ }
+
+ pipe = usb_sndctrlpipe(udev, 0);
+ return usb_control_msg(udev, pipe, ATH3K_SET_NORMAL_MODE,
+ USB_TYPE_VENDOR, 0, 0,
+ NULL, 0, USB_CTRL_SET_TIMEOUT);
+}
+
+static int ath3k_load_patch(struct usb_device *udev)
+{
+ unsigned char fw_state;
+ char filename[ATH3K_NAME_LEN] = {0};
+ const struct firmware *firmware;
+ struct ath3k_version fw_version, pt_version;
+ int ret;
+
+ ret = ath3k_get_state(udev, &fw_state);
+ if (ret < 0) {
+ BT_ERR("Can't get state to change to load ram patch err");
+ return ret;
+ }
+
+ if (fw_state & ATH3K_PATCH_UPDATE) {
+ BT_DBG("Patch was already downloaded");
+ return 0;
+ }
+
+ ret = ath3k_get_version(udev, &fw_version);
+ if (ret < 0) {
+ BT_ERR("Can't get version to change to load ram patch err");
+ return ret;
+ }
+
+ snprintf(filename, ATH3K_NAME_LEN, "ar3k/AthrBT_0x%08x.dfu",
+ fw_version.rom_version);
+
+ ret = request_firmware(&firmware, filename, &udev->dev);
+ if (ret < 0) {
+ BT_ERR("Patch file not found %s", filename);
+ return ret;
+ }
+
+ pt_version.rom_version = *(int *)(firmware->data + firmware->size - 8);
+ pt_version.build_version = *(int *)
+ (firmware->data + firmware->size - 4);
+
+ if ((pt_version.rom_version != fw_version.rom_version) ||
+ (pt_version.build_version <= fw_version.build_version)) {
+ BT_ERR("Patch file version did not match with firmware");
+ release_firmware(firmware);
+ return -EINVAL;
+ }
+
+ ret = ath3k_load_fwfile(udev, firmware);
+ release_firmware(firmware);
+
+ return ret;
+}
+
+static int ath3k_load_syscfg(struct usb_device *udev)
+{
+ unsigned char fw_state;
+ char filename[ATH3K_NAME_LEN] = {0};
+ const struct firmware *firmware;
+ struct ath3k_version fw_version;
+ int clk_value, ret;
+
+ ret = ath3k_get_state(udev, &fw_state);
+ if (ret < 0) {
+ BT_ERR("Can't get state to change to load configration err");
+ return -EBUSY;
+ }
+
+ ret = ath3k_get_version(udev, &fw_version);
+ if (ret < 0) {
+ BT_ERR("Can't get version to change to load ram patch err");
+ return ret;
+ }
+
+ switch (fw_version.ref_clock) {
+
+ case ATH3K_XTAL_FREQ_26M:
+ clk_value = 26;
+ break;
+ case ATH3K_XTAL_FREQ_40M:
+ clk_value = 40;
+ break;
+ case ATH3K_XTAL_FREQ_19P2:
+ clk_value = 19;
+ break;
+ default:
+ clk_value = 0;
+ break;
+ }
+
+ snprintf(filename, ATH3K_NAME_LEN, "ar3k/ramps_0x%08x_%d%s",
+ fw_version.rom_version, clk_value, ".dfu");
+
+ ret = request_firmware(&firmware, filename, &udev->dev);
+ if (ret < 0) {
+ BT_ERR("Configuration file not found %s", filename);
+ return ret;
+ }
+
+ ret = ath3k_load_fwfile(udev, firmware);
+ release_firmware(firmware);
+
+ return ret;
+}
+
static int ath3k_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
return -ENODEV;
+ /* match device ID in ath3k blacklist table */
+ if (!id->driver_info) {
+ const struct usb_device_id *match;
+ match = usb_match_id(intf, ath3k_blist_tbl);
+ if (match)
+ id = match;
+ }
+
+ /* load patch and sysconfig files for AR3012 */
+ if (id->driver_info & BTUSB_ATH3012) {
+ ret = ath3k_load_patch(udev);
+ if (ret < 0) {
+ BT_ERR("Loading patch file failed");
+ return ret;
+ }
+ ret = ath3k_load_syscfg(udev);
+ if (ret < 0) {
+ BT_ERR("Loading sysconfig file failed");
+ return ret;
+ }
+ ret = ath3k_set_normal_mode(udev);
+ if (ret < 0) {
+ BT_ERR("Set normal mode failed");
+ return ret;
+ }
+ ath3k_switch_pid(udev);
+ return 0;
+ }
+
if (request_firmware(&firmware, "ath3k-1.fw", &udev->dev) < 0) {
+ BT_ERR("Error loading firmware");
return -EIO;
}
projects / linux-beck.git / commitdiff