OMAP3: PM: idle: Remove fclk check for idle loop

This patch removes the check to see if some functional clocks are
still enabled before entering sleep.  This is no longer needed when
using safe state (C1) that keeps CORE active.

Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index c77f6db8a63d469fe376a632353d379c3514a7c0..4e87b61ca040f9bcce3b73e7520421d0451e69ae 100644 (file)
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -461,54 +461,12 @@ void omap_sram_idle(void)
        omap2_clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]);
 }
 
-/*
- * Check if functional clocks are enabled before entering
- * sleep. This function could be behind CONFIG_PM_DEBUG
- * when all drivers are configuring their sysconfig registers
- * properly and using their clocks properly.
- */
-static int omap3_fclks_active(void)
-{
-       u32 fck_core1 = 0, fck_core3 = 0, fck_sgx = 0, fck_dss = 0,
-               fck_cam = 0, fck_per = 0, fck_usbhost = 0;
-
-       fck_core1 = cm_read_mod_reg(CORE_MOD,
-                                   CM_FCLKEN1);
-       if (omap_rev() > OMAP3430_REV_ES1_0) {
-               fck_core3 = cm_read_mod_reg(CORE_MOD,
-                                           OMAP3430ES2_CM_FCLKEN3);
-               fck_sgx = cm_read_mod_reg(OMAP3430ES2_SGX_MOD,
-                                         CM_FCLKEN);
-               fck_usbhost = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
-                                             CM_FCLKEN);
-       } else
-               fck_sgx = cm_read_mod_reg(GFX_MOD,
-                                         OMAP3430ES2_CM_FCLKEN3);
-       fck_dss = cm_read_mod_reg(OMAP3430_DSS_MOD,
-                                 CM_FCLKEN);
-       fck_cam = cm_read_mod_reg(OMAP3430_CAM_MOD,
-                                 CM_FCLKEN);
-       fck_per = cm_read_mod_reg(OMAP3430_PER_MOD,
-                                 CM_FCLKEN);
-
-       /* Ignore UART clocks.  These are handled by UART core (serial.c) */
-       fck_core1 &= ~(OMAP3430_EN_UART1 | OMAP3430_EN_UART2);
-       fck_per &= ~OMAP3430_EN_UART3;
-
-       if (fck_core1 | fck_core3 | fck_sgx | fck_dss |
-           fck_cam | fck_per | fck_usbhost)
-               return 1;
-       return 0;
-}
-
 int omap3_can_sleep(void)
 {
        if (!sleep_while_idle)
                return 0;
        if (!omap_uart_can_sleep())
                return 0;
-       if (omap3_fclks_active())
-               return 0;
        return 1;
 }