READ_CAPACITY_16 command);
f = NO_REPORT_OPCODES (don't use report opcodes
command, uas only);
+ g = MAX_SECTORS_240 (don't transfer more than
+ 240 sectors at a time, uas only);
h = CAPACITY_HEURISTICS (decrease the
reported device capacity by one
sector if the number is odd);
{
struct ci_hdrc *ci = container_of(fsm, struct ci_hdrc, fsm);
- mutex_unlock(&fsm->lock);
if (on) {
ci_role_stop(ci);
ci_role_start(ci, CI_ROLE_HOST);
hw_device_reset(ci);
ci_role_start(ci, CI_ROLE_GADGET);
}
- mutex_lock(&fsm->lock);
return 0;
}
{
struct ci_hdrc *ci = container_of(fsm, struct ci_hdrc, fsm);
- mutex_unlock(&fsm->lock);
if (on)
usb_gadget_vbus_connect(&ci->gadget);
else
usb_gadget_vbus_disconnect(&ci->gadget);
- mutex_lock(&fsm->lock);
return 0;
}
}
while (buflen > 0) {
+ elength = buffer[0];
+ if (!elength) {
+ dev_err(&intf->dev, "skipping garbage byte\n");
+ elength = 1;
+ goto next_desc;
+ }
if (buffer[1] != USB_DT_CS_INTERFACE) {
dev_err(&intf->dev, "skipping garbage\n");
goto next_desc;
}
- elength = buffer[0];
switch (buffer[2]) {
case USB_CDC_UNION_TYPE: /* we've found it */
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- hcd->regs = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(hcd->regs)) {
- ret = PTR_ERR(hcd->regs);
+ if (!res) {
+ dev_err(&pdev->dev, "Unable to get memory resource\n");
+ ret = -ENODEV;
goto put_hcd;
}
+
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
+ hcd->regs = devm_ioremap(&pdev->dev, hcd->rsrc_start, hcd->rsrc_len);
+ if (!hcd->regs) {
+ dev_err(&pdev->dev, "ioremap failed\n");
+ ret = -ENOMEM;
+ goto put_hcd;
+ }
/*
* OTG driver takes care of PHY initialization, clock management,
}
static int uas_use_uas_driver(struct usb_interface *intf,
- const struct usb_device_id *id)
+ const struct usb_device_id *id,
+ unsigned long *flags_ret)
{
struct usb_host_endpoint *eps[4] = { };
struct usb_device *udev = interface_to_usbdev(intf);
* this writing the following versions exist:
* ASM1051 - no uas support version
* ASM1051 - with broken (*) uas support
- * ASM1053 - with working uas support
+ * ASM1053 - with working uas support, but problems with large xfers
* ASM1153 - with working uas support
*
* Devices with these chips re-use a number of device-ids over the
} else if (usb_ss_max_streams(&eps[1]->ss_ep_comp) == 32) {
/* Possibly an ASM1051, disable uas */
flags |= US_FL_IGNORE_UAS;
+ } else {
+ /* ASM1053, these have issues with large transfers */
+ flags |= US_FL_MAX_SECTORS_240;
}
}
return 0;
}
+ if (flags_ret)
+ *flags_ret = flags;
+
return 1;
}
static int uas_slave_alloc(struct scsi_device *sdev)
{
- sdev->hostdata = (void *)sdev->host->hostdata;
+ struct uas_dev_info *devinfo =
+ (struct uas_dev_info *)sdev->host->hostdata;
+
+ sdev->hostdata = devinfo;
/* USB has unusual DMA-alignment requirements: Although the
* starting address of each scatter-gather element doesn't matter,
*/
blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1));
+ if (devinfo->flags & US_FL_MAX_SECTORS_64)
+ blk_queue_max_hw_sectors(sdev->request_queue, 64);
+ else if (devinfo->flags & US_FL_MAX_SECTORS_240)
+ blk_queue_max_hw_sectors(sdev->request_queue, 240);
+
return 0;
}
struct Scsi_Host *shost = NULL;
struct uas_dev_info *devinfo;
struct usb_device *udev = interface_to_usbdev(intf);
+ unsigned long dev_flags;
- if (!uas_use_uas_driver(intf, id))
+ if (!uas_use_uas_driver(intf, id, &dev_flags))
return -ENODEV;
if (uas_switch_interface(udev, intf))
devinfo->udev = udev;
devinfo->resetting = 0;
devinfo->shutdown = 0;
- devinfo->flags = id->driver_info;
- usb_stor_adjust_quirks(udev, &devinfo->flags);
+ devinfo->flags = dev_flags;
init_usb_anchor(&devinfo->cmd_urbs);
init_usb_anchor(&devinfo->sense_urbs);
init_usb_anchor(&devinfo->data_urbs);
US_FL_SINGLE_LUN | US_FL_NO_WP_DETECT |
US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16 |
US_FL_INITIAL_READ10 | US_FL_WRITE_CACHE |
- US_FL_NO_ATA_1X | US_FL_NO_REPORT_OPCODES);
+ US_FL_NO_ATA_1X | US_FL_NO_REPORT_OPCODES |
+ US_FL_MAX_SECTORS_240);
p = quirks;
while (*p) {
case 'f':
f |= US_FL_NO_REPORT_OPCODES;
break;
+ case 'g':
+ f |= US_FL_MAX_SECTORS_240;
+ break;
case 'h':
f |= US_FL_CAPACITY_HEURISTICS;
break;
/* If uas is enabled and this device can do uas then ignore it. */
#if IS_ENABLED(CONFIG_USB_UAS)
- if (uas_use_uas_driver(intf, id))
+ if (uas_use_uas_driver(intf, id, NULL))
return -ENXIO;
#endif
/* Cannot handle ATA_12 or ATA_16 CDBs */ \
US_FLAG(NO_REPORT_OPCODES, 0x04000000) \
/* Cannot handle MI_REPORT_SUPPORTED_OPERATION_CODES */ \
+ US_FLAG(MAX_SECTORS_240, 0x08000000) \
+ /* Sets max_sectors to 240 */ \
#define US_FLAG(name, value) US_FL_##name = value ,
enum { US_DO_ALL_FLAGS };